2018-06-13T03:23:35.678Z,1528860215.678 [Supervisor](DEBUG): Initializing supervisor.
2018-06-13T03:23:35.681Z,1528860215.681 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2018-06-13T03:23:35.682Z,1528860215.682 [SyncHandler](INFO): Protected caller Thread ID is 799
2018-06-13T03:23:35.682Z,1528860215.682 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2018-06-13T03:23:35.683Z,1528860215.683 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2018-06-13T03:23:35.683Z,1528860215.683 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 800
2018-06-13T03:23:35.686Z,1528860215.686 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2018-06-13T03:23:35.697Z,1528860215.697 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2018-06-13T03:23:35.698Z,1528860215.698 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2018-06-13T03:23:35.698Z,1528860215.698 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 801
2018-06-13T03:23:35.699Z,1528860215.699 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2018-06-13T03:23:35.699Z,1528860215.699 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2018-06-13T03:23:35.700Z,1528860215.700 [logger ThreadHandler](INFO): Protected caller Thread ID is 802
2018-06-13T03:23:35.702Z,1528860215.702 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2018-06-13T03:23:35.702Z,1528860215.702 [Supervisor](INFO): Looking for Config files in directory: Config/
2018-06-13T03:23:35.706Z,1528860215.706 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2018-06-13T03:23:35.805Z,1528860215.805 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2018-06-13T03:23:35.806Z,1528860215.806 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2018-06-13T03:23:36.130Z,1528860216.130 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2018-06-13T03:23:36.131Z,1528860216.131 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2018-06-13T03:23:36.468Z,1528860216.468 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2018-06-13T03:23:36.469Z,1528860216.469 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2018-06-13T03:23:36.604Z,1528860216.604 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2018-06-13T03:23:36.606Z,1528860216.606 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2018-06-13T03:23:36.807Z,1528860216.807 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2018-06-13T03:23:36.808Z,1528860216.808 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2018-06-13T03:23:36.890Z,1528860216.890 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2018-06-13T03:23:37.098Z,1528860217.098 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2018-06-13T03:23:37.099Z,1528860217.099 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2018-06-13T03:23:37.299Z,1528860217.299 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2018-06-13T03:23:37.300Z,1528860217.300 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2018-06-13T03:23:37.642Z,1528860217.642 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2018-06-13T03:23:37.643Z,1528860217.643 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2018-06-13T03:23:37.741Z,1528860217.741 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2018-06-13T03:23:37.742Z,1528860217.742 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2018-06-13T03:23:37.885Z,1528860217.885 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2018-06-13T03:23:37.886Z,1528860217.886 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2018-06-13T03:23:38.338Z,1528860218.338 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2018-06-13T03:23:38.339Z,1528860218.339 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2018-06-13T03:23:38.447Z,1528860218.447 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2018-06-13T03:23:38.448Z,1528860218.448 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2018-06-13T03:23:38.756Z,1528860218.756 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2018-06-13T03:23:38.757Z,1528860218.757 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2018-06-13T03:23:39.261Z,1528860219.261 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2018-06-13T03:23:39.263Z,1528860219.263 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-opah/
2018-06-13T03:23:39.267Z,1528860219.267 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Sensor.cfg
2018-06-13T03:23:39.439Z,1528860219.439 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Science.cfg
2018-06-13T03:23:39.884Z,1528860219.884 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Battery.cfg
2018-06-13T03:23:40.113Z,1528860220.113 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2018-06-13T03:23:40.115Z,1528860220.115 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/BIT.cfg
2018-06-13T03:23:40.227Z,1528860220.227 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/logger.cfg
2018-06-13T03:23:40.339Z,1528860220.339 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Navigation.cfg
2018-06-13T03:23:40.446Z,1528860220.446 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Control.cfg
2018-06-13T03:23:40.547Z,1528860220.547 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/secure.cfg
2018-06-13T03:23:40.631Z,1528860220.631 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/vehicle.cfg
2018-06-13T03:23:40.801Z,1528860220.801 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Servo.cfg
2018-06-13T03:23:40.909Z,1528860220.909 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Simulator.cfg
2018-06-13T03:23:40.996Z,1528860220.996 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2018-06-13T03:23:40.000Z,1528860221.000 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2018-06-13T03:23:41.138Z,1528860221.138 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2018-06-13T03:23:41.140Z,1528860221.140 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2018-06-13T03:23:41.612Z,1528860221.612 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2018-06-13T03:23:41.627Z,1528860221.627 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2018-06-13T03:23:42.261Z,1528860222.261 [DataOverHttps] Loaded
2018-06-13T03:23:42.261Z,1528860222.261 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2018-06-13T03:23:42.289Z,1528860222.289 [Depth_Keller] Loaded
2018-06-13T03:23:42.289Z,1528860222.289 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2018-06-13T03:23:42.294Z,1528860222.294 [DropWeight] Loaded
2018-06-13T03:23:42.294Z,1528860222.294 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2018-06-13T03:23:42.395Z,1528860222.395 [NAL9602] Loaded
2018-06-13T03:23:42.395Z,1528860222.395 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2018-06-13T03:23:42.411Z,1528860222.411 [Onboard] Loaded
2018-06-13T03:23:42.412Z,1528860222.412 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2018-06-13T03:23:42.422Z,1528860222.422 [Radio_Surface] Loaded
2018-06-13T03:23:42.422Z,1528860222.422 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2018-06-13T03:23:42.424Z,1528860222.424 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 407C44E0
2018-06-13T03:23:42.424Z,1528860222.424 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 881
2018-06-13T03:23:42.555Z,1528860222.555 [DAT] Loaded
2018-06-13T03:23:42.555Z,1528860222.555 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread.
2018-06-13T03:23:42.562Z,1528860222.562 [SCPI] Loaded
2018-06-13T03:23:42.562Z,1528860222.562 [ComponentRegistry](DEBUG): SyncComponent "SCPI" handled in the control thread.
2018-06-13T03:23:42.716Z,1528860222.716 [PNI_TCM] Loaded
2018-06-13T03:23:42.716Z,1528860222.716 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2018-06-13T03:23:44.537Z,1528860224.537 [BPC1] Loaded
2018-06-13T03:23:44.537Z,1528860224.537 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2018-06-13T03:23:44.538Z,1528860224.538 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2018-06-13T03:23:44.538Z,1528860224.538 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2018-06-13T03:23:45.063Z,1528860225.063 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2018-06-13T03:23:45.063Z,1528860225.063 [StratificationFrontDetector](DEBUG): (re)initializing
2018-06-13T03:23:45.063Z,1528860225.063 [StratificationFrontDetector] Loaded
2018-06-13T03:23:45.063Z,1528860225.063 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2018-06-13T03:23:45.064Z,1528860225.064 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2018-06-13T03:23:45.064Z,1528860225.064 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2018-06-13T03:23:45.158Z,1528860225.158 [VerticalControl](DEBUG): Construct VerticalControl.
2018-06-13T03:23:45.270Z,1528860225.270 [VerticalControl] Loaded
2018-06-13T03:23:45.270Z,1528860225.270 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2018-06-13T03:23:45.271Z,1528860225.271 [HorizontalControl](DEBUG): Construct HorizontalControl.
2018-06-13T03:23:45.341Z,1528860225.341 [HorizontalControl] Loaded
2018-06-13T03:23:45.341Z,1528860225.341 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2018-06-13T03:23:45.342Z,1528860225.342 [SpeedControl](DEBUG): Construct SpeedControl.
2018-06-13T03:23:45.348Z,1528860225.348 [SpeedControl] Loaded
2018-06-13T03:23:45.348Z,1528860225.348 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2018-06-13T03:23:45.349Z,1528860225.349 [LoopControl](DEBUG): Construct LoopControl.
2018-06-13T03:23:45.349Z,1528860225.349 [LoopControl] Loaded
2018-06-13T03:23:45.350Z,1528860225.350 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2018-06-13T03:23:45.350Z,1528860225.350 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2018-06-13T03:23:45.351Z,1528860225.351 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2018-06-13T03:23:45.549Z,1528860225.549 [Aanderaa_O2] Loaded
2018-06-13T03:23:45.549Z,1528860225.549 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2018-06-13T03:23:45.599Z,1528860225.599 [CTD_Seabird] Loaded
2018-06-13T03:23:45.600Z,1528860225.600 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2018-06-13T03:23:45.601Z,1528860225.601 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 408CE4E0
2018-06-13T03:23:45.601Z,1528860225.601 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 882
2018-06-13T03:23:45.617Z,1528860225.617 [ESPComponent] Loaded
2018-06-13T03:23:45.618Z,1528860225.618 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2018-06-13T03:23:45.632Z,1528860225.632 [PAR_Licor] Loaded
2018-06-13T03:23:45.632Z,1528860225.632 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2018-06-13T03:23:45.683Z,1528860225.683 [WetLabsBB2FL] Loaded
2018-06-13T03:23:45.684Z,1528860225.684 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2018-06-13T03:23:45.685Z,1528860225.685 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 408FE4E0
2018-06-13T03:23:45.685Z,1528860225.685 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 883
2018-06-13T03:23:45.686Z,1528860225.686 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2018-06-13T03:23:45.686Z,1528860225.686 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2018-06-13T03:23:45.724Z,1528860225.724 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2018-06-13T03:23:45.725Z,1528860225.725 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2018-06-13T03:23:45.850Z,1528860225.850 [BuoyancyServo] Loaded
2018-06-13T03:23:45.850Z,1528860225.850 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2018-06-13T03:23:45.862Z,1528860225.862 [ElevatorServo] Loaded
2018-06-13T03:23:45.862Z,1528860225.862 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2018-06-13T03:23:45.873Z,1528860225.873 [MassServo] Loaded
2018-06-13T03:23:45.873Z,1528860225.873 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2018-06-13T03:23:45.885Z,1528860225.885 [RudderServo] Loaded
2018-06-13T03:23:45.885Z,1528860225.885 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2018-06-13T03:23:45.896Z,1528860225.896 [ThrusterServo] Loaded
2018-06-13T03:23:45.897Z,1528860225.897 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2018-06-13T03:23:45.897Z,1528860225.897 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2018-06-13T03:23:45.898Z,1528860225.898 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2018-06-13T03:23:46.019Z,1528860226.019 [DeadReckonUsingMultipleVelocitySources] Loaded
2018-06-13T03:23:46.019Z,1528860226.019 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2018-06-13T03:23:46.075Z,1528860226.075 [DeadReckonUsingSpeedCalculator] Loaded
2018-06-13T03:23:46.076Z,1528860226.076 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2018-06-13T03:23:46.132Z,1528860226.132 [DeadReckonWithRespectToSeafloor] Loaded
2018-06-13T03:23:46.132Z,1528860226.132 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2018-06-13T03:23:46.150Z,1528860226.150 [NavChart] Loaded
2018-06-13T03:23:46.150Z,1528860226.150 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2018-06-13T03:23:46.154Z,1528860226.154 [UniversalFixResidualReporter] Loaded
2018-06-13T03:23:46.154Z,1528860226.154 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2018-06-13T03:23:46.155Z,1528860226.155 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2018-06-13T03:23:46.155Z,1528860226.155 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2018-06-13T03:23:46.180Z,1528860226.180 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2018-06-13T03:23:46.180Z,1528860226.180 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2018-06-13T03:23:46.347Z,1528860226.347 [SBIT](DEBUG): Construct Startup Built In Test.
2018-06-13T03:23:46.358Z,1528860226.358 [SBIT] Loaded
2018-06-13T03:23:46.358Z,1528860226.358 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2018-06-13T03:23:46.359Z,1528860226.359 [IBIT](DEBUG): Construct Initiated Built In Test.
2018-06-13T03:23:46.370Z,1528860226.370 [IBIT] Loaded
2018-06-13T03:23:46.371Z,1528860226.371 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2018-06-13T03:23:46.374Z,1528860226.374 [CBIT](DEBUG): Construct Continuous Built In Test.
2018-06-13T03:23:46.530Z,1528860226.530 [CBIT] Loaded
2018-06-13T03:23:46.530Z,1528860226.530 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2018-06-13T03:23:46.530Z,1528860226.530 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2018-06-13T03:23:46.531Z,1528860226.531 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2018-06-13T03:23:46.590Z,1528860226.590 [DepthRateCalculator] Loaded
2018-06-13T03:23:46.590Z,1528860226.590 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2018-06-13T03:23:46.595Z,1528860226.595 [PitchRateCalculator] Loaded
2018-06-13T03:23:46.596Z,1528860226.596 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2018-06-13T03:23:46.608Z,1528860226.608 [SpeedCalculator] Loaded
2018-06-13T03:23:46.608Z,1528860226.608 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2018-06-13T03:23:46.630Z,1528860226.630 [TempGradientCalculator] Loaded
2018-06-13T03:23:46.631Z,1528860226.631 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2018-06-13T03:23:46.643Z,1528860226.643 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2018-06-13T03:23:46.643Z,1528860226.643 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2018-06-13T03:23:46.648Z,1528860226.648 [YawRateCalculator] Loaded
2018-06-13T03:23:46.649Z,1528860226.649 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2018-06-13T03:23:46.679Z,1528860226.679 [ElevatorOffsetCalculator] Loaded
2018-06-13T03:23:46.680Z,1528860226.680 [ComponentRegistry](DEBUG): SyncComponent "ElevatorOffsetCalculator" handled in the control thread.
2018-06-13T03:23:46.680Z,1528860226.680 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2018-06-13T03:23:46.684Z,1528860226.684 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2018-06-13T03:23:46.684Z,1528860226.684 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2018-06-13T03:23:46.691Z,1528860226.691 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2018-06-13T03:23:46.692Z,1528860226.692 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 409EF4E0
2018-06-13T03:23:46.692Z,1528860226.692 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 884
2018-06-13T03:23:46.697Z,1528860226.697 [Supervisor](INFO): Main Thread ID is 798
2018-06-13T03:23:46.697Z,1528860226.697 [Supervisor](DEBUG): Running supervisor.
2018-06-13T03:23:46.697Z,1528860226.697 [CommandLine ThreadHandler](INFO): Handler Thread ID is 885
2018-06-13T03:23:46.700Z,1528860226.700 [controlThread ThreadHandler](INFO): Handler Thread ID is 886
2018-06-13T03:23:46.700Z,1528860226.700 [controlThread](DEBUG): Initializing ControlThread
2018-06-13T03:23:46.708Z,1528860226.708 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2018-06-13T03:23:46.710Z,1528860226.710 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2018-06-13T03:23:46.711Z,1528860226.711 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2018-06-13T03:23:46.711Z,1528860226.711 [LoopControl](DEBUG): Initialize LoopControlComponent.
2018-06-13T03:23:46.714Z,1528860226.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T03:23:46.715Z,1528860226.715 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:23:46.715Z,1528860226.715 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:23:46.715Z,1528860226.715 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T03:23:46.716Z,1528860226.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:23:46.716Z,1528860226.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:23:46.716Z,1528860226.716 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T03:23:46.717Z,1528860226.717 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:23:46.717Z,1528860226.717 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:23:46.718Z,1528860226.718 [NavChart](DEBUG): Initialize NavChart Navigation.
2018-06-13T03:23:46.718Z,1528860226.718 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2018-06-13T03:23:46.719Z,1528860226.719 [SBIT](INFO): Initialize SBIT Component.
2018-06-13T03:23:46.719Z,1528860226.719 [SBIT](IMPORTANT): git: 2018-03-26
2018-06-13T03:23:46.719Z,1528860226.719 [SBIT](INFO): git hash: 90d569f8a079511617f09e1c7ab73bdf864c80af
2018-06-13T03:23:46.720Z,1528860226.720 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-06-13T03:23:46.720Z,1528860226.720 [SBIT](IMPORTANT): Kernel Version:#2 PREEMPT Thu Jan 11 20:13:48 PST 2018
2018-06-13T03:23:46.721Z,1528860226.721 [SBIT](INFO): Beginning SBIT in 39.000000 seconds.
2018-06-13T03:23:46.721Z,1528860226.721 [IBIT](INFO): Initialize IBIT Component.
2018-06-13T03:23:46.722Z,1528860226.722 [CBIT](DEBUG): Initialize CBIT Component.
2018-06-13T03:23:46.722Z,1528860226.722 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2018-06-13T03:23:46.723Z,1528860226.723 [CBIT](CRITICAL): LAST REBOOT DUE TO WATCHDOG TIMER RESET.
2018-06-13T03:23:46.723Z,1528860226.723 [logger ThreadHandler](INFO): Handler Thread ID is 887
2018-06-13T03:23:46.741Z,1528860226.741 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 888
2018-06-13T03:23:46.747Z,1528860226.747 [Radio_Surface](INFO): Powering up
2018-06-13T03:23:46.753Z,1528860226.753 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 889
2018-06-13T03:23:46.754Z,1528860226.754 [CTD_Seabird](INFO): Initializing
2018-06-13T03:23:46.754Z,1528860226.754 [CTD_Seabird](INFO): Checking LCM
2018-06-13T03:23:46.871Z,1528860226.871 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 890
2018-06-13T03:23:46.872Z,1528860226.872 [WetLabsBB2FL](INFO): Powering down
2018-06-13T03:23:46.893Z,1528860226.893 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-06-13T03:23:46.893Z,1528860226.893 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2018-06-13T03:23:46.894Z,1528860226.894 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2018-06-13T03:23:46.894Z,1528860226.894 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2018-06-13T03:23:46.895Z,1528860226.895 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2018-06-13T03:23:46.895Z,1528860226.895 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2018-06-13T03:23:46.896Z,1528860226.896 [ElevatorOffsetCalculator](DEBUG): Initializing ElevatorOffsetCalculator.
2018-06-13T03:23:46.974Z,1528860226.974 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2018-06-13T03:23:46.988Z,1528860226.988 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 891
2018-06-13T03:23:47.099Z,1528860227.099 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2HA05M.000
2018-06-13T03:23:47.099Z,1528860227.099 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2HA05M.000
2018-06-13T03:23:47.099Z,1528860227.099 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3HA20M.000
2018-06-13T03:23:47.099Z,1528860227.099 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3HA20M.000
2018-06-13T03:23:47.099Z,1528860227.099 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4HA51M.000
2018-06-13T03:23:47.100Z,1528860227.100 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4HA51M.000
2018-06-13T03:23:47.100Z,1528860227.100 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4HA51M.000
2018-06-13T03:23:47.100Z,1528860227.100 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4HA51M.000
2018-06-13T03:23:47.100Z,1528860227.100 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5HA53M.000
2018-06-13T03:23:47.100Z,1528860227.100 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5HA53M.000
2018-06-13T03:23:47.101Z,1528860227.101 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5HA55M.000
2018-06-13T03:23:47.101Z,1528860227.101 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5HA55M.000
2018-06-13T03:23:47.104Z,1528860227.104 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2018-06-13T03:23:47.129Z,1528860227.129 [CTD_Seabird](INFO): LCM OK
2018-06-13T03:23:47.129Z,1528860227.129 [CTD_Seabird](INFO): Powering up
2018-06-13T03:23:47.163Z,1528860227.163 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2018-06-13T03:23:47.164Z,1528860227.164 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2018-06-13T03:23:47.235Z,1528860227.235 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2018-06-13T03:23:47.236Z,1528860227.236 [Default:A.Wait](DEBUG): Construct Wait.
2018-06-13T03:23:47.254Z,1528860227.254 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-06-13T03:23:47.277Z,1528860227.277 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2018-06-13T03:23:47.279Z,1528860227.279 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2018-06-13T03:23:47.301Z,1528860227.301 [Default:E.Execute](DEBUG): Construct Execute.
2018-06-13T03:23:47.304Z,1528860227.304 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2018-06-13T03:23:47.319Z,1528860227.319 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,DAT,SCPI,PNI_TCM,BPC1,Aanderaa_O2,ESPComponent,PAR_Licor,Depth_Keller,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,ElevatorOffsetCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-06-13T03:23:47.342Z,1528860227.342 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2018-06-13T03:23:47.382Z,1528860227.382 [Depth_Keller](ERROR): Pressure reading out of range: 1658.386841 decibar
2018-06-13T03:23:47.438Z,1528860227.438 [DAT](INFO): Powering up
2018-06-13T03:23:47.439Z,1528860227.439 [DAT](DEBUG): Initializing DAT.
2018-06-13T03:23:47.638Z,1528860227.638 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-06-13T03:23:47.735Z,1528860227.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:47.735Z,1528860227.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-06-13T03:23:47.849Z,1528860227.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:47.854Z,1528860227.854 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:47.873Z,1528860227.873 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:47.977Z,1528860227.977 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-06-13T03:23:47.985Z,1528860227.985 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-06-13T03:23:47.999Z,1528860227.999 [ElevatorServo](DEBUG): Initializing EZServoServo.
2018-06-13T03:23:48.005Z,1528860228.005 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2018-06-13T03:23:48.015Z,1528860228.015 [MassServo](DEBUG): Initializing EZServoServo.
2018-06-13T03:23:48.021Z,1528860228.021 [MassServo](DEBUG): Initializing MassServo.
2018-06-13T03:23:48.042Z,1528860228.042 [RudderServo](DEBUG): Initializing EZServoServo.
2018-06-13T03:23:48.049Z,1528860228.049 [RudderServo](DEBUG): Initializing RudderServo.
2018-06-13T03:23:48.070Z,1528860228.070 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-06-13T03:23:48.077Z,1528860228.077 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-06-13T03:23:48.122Z,1528860228.122 [CommandLine](FAULT): Scheduling is paused
2018-06-13T03:23:48.122Z,1528860228.122 [CBIT](INFO): Critical error at 20180613T032346
2018-06-13T03:23:48.122Z,1528860228.122 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2018-06-13T03:23:48.371Z,1528860228.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:48.371Z,1528860228.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-06-13T03:23:48.372Z,1528860228.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:48.372Z,1528860228.372 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:48.381Z,1528860228.381 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:48.603Z,1528860228.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:48.603Z,1528860228.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-06-13T03:23:48.604Z,1528860228.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:48.605Z,1528860228.605 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:48.613Z,1528860228.613 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:48.949Z,1528860228.949 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2018-06-13T03:23:48.949Z,1528860228.949 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2018-06-13T03:23:48.949Z,1528860228.949 [BuoyancyServo] Communications Fault, FailCount= 1
2018-06-13T03:23:48.949Z,1528860228.949 [BuoyancyServo](ERROR): Communications Fault
2018-06-13T03:23:49.156Z,1528860229.156 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2018-06-13T03:23:49.236Z,1528860229.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:49.236Z,1528860229.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-06-13T03:23:49.237Z,1528860229.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:49.245Z,1528860229.245 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:49.246Z,1528860229.246 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:49.259Z,1528860229.259 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-06-13T03:23:49.259Z,1528860229.259 [BuoyancyServo](INFO): Powering down
2018-06-13T03:23:49.613Z,1528860229.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:49.613Z,1528860229.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-06-13T03:23:49.614Z,1528860229.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:49.615Z,1528860229.615 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:49.615Z,1528860229.615 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:50.036Z,1528860230.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:50.037Z,1528860230.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-06-13T03:23:50.038Z,1528860230.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:50.038Z,1528860230.038 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:50.039Z,1528860230.039 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:50.436Z,1528860230.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:50.437Z,1528860230.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-06-13T03:23:50.438Z,1528860230.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:50.438Z,1528860230.438 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:50.439Z,1528860230.439 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:50.921Z,1528860230.921 [Aanderaa_O2](INFO): Powering down
2018-06-13T03:23:51.020Z,1528860231.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:51.021Z,1528860231.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-06-13T03:23:51.022Z,1528860231.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:51.026Z,1528860231.026 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:51.027Z,1528860231.027 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-06-13T03:23:51.227Z,1528860231.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-06-13T03:23:51.228Z,1528860231.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:51.357Z,1528860231.357 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2018-06-13T03:23:51.357Z,1528860231.357 [BuoyancyServo] No Fault, FailCount= 1
2018-06-13T03:23:51.607Z,1528860231.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-06-13T03:23:51.608Z,1528860231.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:51.631Z,1528860231.631 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-06-13T03:23:51.750Z,1528860231.750 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-06-13T03:23:52.097Z,1528860232.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2018-06-13T03:23:52.099Z,1528860232.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:52.429Z,1528860232.429 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-06-13T03:23:52.493Z,1528860232.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:52.588Z,1528860232.588 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2018-06-13T03:23:52.696Z,1528860232.696 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd
2018-06-13T03:23:52.885Z,1528860232.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:53.062Z,1528860233.062 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-06-13T03:23:53.062Z,1528860233.062 [CTD_Seabird](INFO): Powering down
2018-06-13T03:23:53.298Z,1528860233.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:53.639Z,1528860233.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:54.074Z,1528860234.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:54.467Z,1528860234.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:54.828Z,1528860234.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:55.235Z,1528860235.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:55.651Z,1528860235.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:56.030Z,1528860236.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:56.436Z,1528860236.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:56.863Z,1528860236.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:57.221Z,1528860237.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:57.621Z,1528860237.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:58.063Z,1528860238.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:58.429Z,1528860238.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:58.882Z,1528860238.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:59.224Z,1528860239.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:23:59.663Z,1528860239.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:00.023Z,1528860240.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:00.387Z,1528860240.387 [DAT](INFO): setting local address to 3
2018-06-13T03:24:00.447Z,1528860240.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:00.788Z,1528860240.788 [DAT](INFO): set local address to 3
2018-06-13T03:24:00.823Z,1528860240.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:01.224Z,1528860241.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:01.622Z,1528860241.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:02.040Z,1528860242.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:02.414Z,1528860242.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:02.823Z,1528860242.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:03.259Z,1528860243.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:03.624Z,1528860243.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:04.082Z,1528860244.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:04.433Z,1528860244.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:04.826Z,1528860244.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:05.220Z,1528860245.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:05.629Z,1528860245.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:06.022Z,1528860246.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:06.432Z,1528860246.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:06.834Z,1528860246.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:07.263Z,1528860247.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:07.681Z,1528860247.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:08.021Z,1528860248.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:08.416Z,1528860248.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:08.864Z,1528860248.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:09.216Z,1528860249.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:09.624Z,1528860249.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:10.079Z,1528860250.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:10.459Z,1528860250.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:10.882Z,1528860250.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:11.265Z,1528860251.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:11.616Z,1528860251.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:12.024Z,1528860252.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:12.473Z,1528860252.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:12.779Z,1528860252.779 [NAL9602](INFO): Powering up NAL9602
2018-06-13T03:24:12.830Z,1528860252.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:13.224Z,1528860253.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:13.662Z,1528860253.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:14.029Z,1528860254.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:14.422Z,1528860254.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:14.846Z,1528860254.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:15.279Z,1528860255.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:15.621Z,1528860255.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:16.020Z,1528860256.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:16.454Z,1528860256.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:16.812Z,1528860256.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:17.247Z,1528860257.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:17.636Z,1528860257.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:18.038Z,1528860258.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:18.448Z,1528860258.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:18.807Z,1528860258.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:19.208Z,1528860259.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:19.662Z,1528860259.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:20.016Z,1528860260.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:20.424Z,1528860260.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:20.857Z,1528860260.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:21.219Z,1528860261.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:21.619Z,1528860261.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:22.018Z,1528860262.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:22.408Z,1528860262.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:22.821Z,1528860262.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:23.223Z,1528860263.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:23.632Z,1528860263.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:23.975Z,1528860263.975 [NAL9602](INFO): NAL9602 initialized
2018-06-13T03:24:24.026Z,1528860264.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:24.438Z,1528860264.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:24.826Z,1528860264.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:25.225Z,1528860265.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:25.647Z,1528860265.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:26.024Z,1528860266.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:26.098Z,1528860266.098 [SBIT](IMPORTANT): Beginning Startup BIT
2018-06-13T03:24:26.109Z,1528860266.109 [CBIT](IMPORTANT): Beginning ground fault scan
2018-06-13T03:24:26.422Z,1528860266.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:26.819Z,1528860266.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:27.230Z,1528860267.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:27.630Z,1528860267.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:28.038Z,1528860268.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:28.569Z,1528860268.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:28.955Z,1528860268.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:29.360Z,1528860269.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:29.756Z,1528860269.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:30.155Z,1528860270.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:30.556Z,1528860270.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:30.608Z,1528860270.608 [CBIT](FAULT): Main Battery Failure. Count: 1
2018-06-13T03:24:30.953Z,1528860270.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:31.356Z,1528860271.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:31.764Z,1528860271.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:32.168Z,1528860272.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:32.567Z,1528860272.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:32.966Z,1528860272.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:33.363Z,1528860273.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:33.757Z,1528860273.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:34.160Z,1528860274.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:34.558Z,1528860274.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:34.958Z,1528860274.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:35.360Z,1528860275.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:35.758Z,1528860275.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:36.159Z,1528860276.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:36.564Z,1528860276.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:36.958Z,1528860276.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:37.017Z,1528860277.017 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.015321
CHAN A1 (24V): -0.065638
CHAN A2 (12V): -0.000589
CHAN A3 (5V): -0.020965
CHAN B0 (3.3V): 0.000140
CHAN B1 (3.15aV): -0.000144
CHAN B2 (3.15bV): -0.000715
CHAN B3 (GND): -0.000416
OPEN: 0.003192
Full Scale Calc: 4.765 mA, -1.589 mA
2018-06-13T03:24:37.371Z,1528860277.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:37.778Z,1528860277.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:38.182Z,1528860278.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:38.569Z,1528860278.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:38.964Z,1528860278.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:39.372Z,1528860279.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:39.763Z,1528860279.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:40.171Z,1528860280.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:40.573Z,1528860280.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:40.961Z,1528860280.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:41.368Z,1528860281.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:41.968Z,1528860281.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:42.384Z,1528860282.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:42.779Z,1528860282.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:43.188Z,1528860283.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:43.579Z,1528860283.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:43.961Z,1528860283.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:44.360Z,1528860284.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:44.764Z,1528860284.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:45.162Z,1528860285.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:45.560Z,1528860285.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:45.960Z,1528860285.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:46.360Z,1528860286.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:46.756Z,1528860286.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:47.160Z,1528860287.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:47.587Z,1528860287.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:47.987Z,1528860287.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:48.428Z,1528860288.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:48.784Z,1528860288.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:49.156Z,1528860289.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:49.561Z,1528860289.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:49.961Z,1528860289.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:50.360Z,1528860290.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:50.760Z,1528860290.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:51.161Z,1528860291.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:51.560Z,1528860291.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:51.959Z,1528860291.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:52.360Z,1528860292.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:52.787Z,1528860292.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:53.187Z,1528860293.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:53.590Z,1528860293.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:53.987Z,1528860293.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:54.360Z,1528860294.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:54.768Z,1528860294.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:55.195Z,1528860295.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:55.564Z,1528860295.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:55.968Z,1528860295.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:56.364Z,1528860296.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:56.760Z,1528860296.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:57.158Z,1528860297.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:57.561Z,1528860297.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:57.992Z,1528860297.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:58.370Z,1528860298.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:58.767Z,1528860298.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:59.167Z,1528860299.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:59.568Z,1528860299.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:24:59.972Z,1528860299.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:00.363Z,1528860300.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:00.768Z,1528860300.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:01.180Z,1528860301.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:01.610Z,1528860301.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:01.973Z,1528860301.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:02.365Z,1528860302.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:02.761Z,1528860302.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:03.184Z,1528860303.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:03.574Z,1528860303.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:03.977Z,1528860303.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:04.374Z,1528860304.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:04.764Z,1528860304.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:05.160Z,1528860305.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:05.568Z,1528860305.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:05.965Z,1528860305.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:06.368Z,1528860306.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:06.772Z,1528860306.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:07.166Z,1528860307.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:07.564Z,1528860307.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:07.972Z,1528860307.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:08.400Z,1528860308.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:08.971Z,1528860308.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:09.344Z,1528860309.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:09.741Z,1528860309.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:10.132Z,1528860310.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:10.528Z,1528860310.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:10.934Z,1528860310.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:11.338Z,1528860311.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:11.732Z,1528860311.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:12.128Z,1528860312.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:12.537Z,1528860312.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:12.942Z,1528860312.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:13.346Z,1528860313.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:13.766Z,1528860313.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:14.150Z,1528860314.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:14.556Z,1528860314.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:14.943Z,1528860314.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:15.328Z,1528860315.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:15.726Z,1528860315.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:16.148Z,1528860316.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:16.552Z,1528860316.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:16.925Z,1528860316.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:17.327Z,1528860317.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:17.727Z,1528860317.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:18.129Z,1528860318.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:18.527Z,1528860318.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:18.937Z,1528860318.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:19.331Z,1528860319.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:19.736Z,1528860319.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:19.826Z,1528860319.826 [SBIT](IMPORTANT): SBIT PASSED
2018-06-13T03:25:19.889Z,1528860319.889 [CommandLine](IMPORTANT): got command configSet list
2018-06-13T03:25:19.889Z,1528860319.889 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2018-06-13T03:25:19.893Z,1528860319.893 [CommandLine](IMPORTANT): CBIT.gf24Offset=107 microampere;

2018-06-13T03:25:19.893Z,1528860319.893 [CommandLine](IMPORTANT): CBIT.gfBattOffset=107 microampere;

2018-06-13T03:25:19.893Z,1528860319.893 [CommandLine](IMPORTANT): CBIT.runFaultClassifier=0 bool;

2018-06-13T03:25:19.893Z,1528860319.893 [CommandLine](IMPORTANT): DAT.loadAtStartup=0 bool;

2018-06-13T03:25:19.894Z,1528860319.894 [CommandLine](IMPORTANT): ESPComponent.loadAtStartup=0 bool;

2018-06-13T03:25:19.894Z,1528860319.894 [CommandLine](IMPORTANT): ESPComponent.sampleTimeout=5 minute;

2018-06-13T03:25:19.894Z,1528860319.894 [CommandLine](IMPORTANT): ESPComponent.simulateHardware=1 bool;

2018-06-13T03:25:19.894Z,1528860319.894 [CommandLine](IMPORTANT): ElevatorOffsetCalculator.loadAtStartup=1 bool;

2018-06-13T03:25:19.894Z,1528860319.894 [CommandLine](IMPORTANT): Express linearApproximation CTD_Seabird.bin_median_sea_water_salinity 0.050000 practical_salinity_unit;

2018-06-13T03:25:19.894Z,1528860319.894 [CommandLine](IMPORTANT): Express linearApproximation CTD_Seabird.bin_median_sea_water_temperature 0.250000 kelvin;

2018-06-13T03:25:19.894Z,1528860319.894 [CommandLine](IMPORTANT): Express none Tracking.azimuth_to_contact_vehicleFrame;

2018-06-13T03:25:19.894Z,1528860319.894 [CommandLine](IMPORTANT): Express none Tracking.direction_navigationFrame;

2018-06-13T03:25:19.894Z,1528860319.894 [CommandLine](IMPORTANT): Express none Tracking.heading_to_contact;

2018-06-13T03:25:19.895Z,1528860319.895 [CommandLine](IMPORTANT): Express linearApproximation Tracking.range_to_contact 10.000000 meter;

2018-06-13T03:25:19.895Z,1528860319.895 [CommandLine](IMPORTANT): Express none VerticalTemperatureHomogeneityIndexCalculator.vertical_temperature_homogeneity_index;

2018-06-13T03:25:19.895Z,1528860319.895 [CommandLine](IMPORTANT): Express linearApproximation WetLabsBB2FL.bin_mean_mass_concentration_of_chlorophyll_in_sea_water 0.040000 microgram_per_liter;

2018-06-13T03:25:19.895Z,1528860319.895 [CommandLine](IMPORTANT): Express none mass_concentration_of_chlorophyll_in_sea_water;

2018-06-13T03:25:19.895Z,1528860319.895 [CommandLine](IMPORTANT): Express none sea_water_salinity;

2018-06-13T03:25:19.895Z,1528860319.895 [CommandLine](IMPORTANT): Express none sea_water_temperature;

2018-06-13T03:25:19.895Z,1528860319.895 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=250 cubic_centimeter;

2018-06-13T03:25:19.895Z,1528860319.895 [CommandLine](IMPORTANT): VerticalControl.massDefault=0.5 centimeter;

2018-06-13T03:25:20.137Z,1528860320.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:20.140Z,1528860320.140 [MissionManager](IMPORTANT): Started mission Startup
2018-06-13T03:25:20.140Z,1528860320.140 [Startup] Running Loop=1
2018-06-13T03:25:20.140Z,1528860320.140 [Startup](DEBUG): Aggregate::initialize Startup
2018-06-13T03:25:20.140Z,1528860320.140 [Startup:A.GoToSurface] Running Loop=1
2018-06-13T03:25:20.140Z,1528860320.140 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-06-13T03:25:20.142Z,1528860320.142 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-06-13T03:25:20.142Z,1528860320.142 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-06-13T03:25:20.143Z,1528860320.143 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-06-13T03:25:20.143Z,1528860320.143 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-06-13T03:25:20.143Z,1528860320.143 [Startup:A.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-06-13T03:25:20.149Z,1528860320.149 [Startup:StartupSatComms] Running Loop=1
2018-06-13T03:25:20.149Z,1528860320.149 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2018-06-13T03:25:20.149Z,1528860320.149 [Startup:StartupSatComms:A] Running Loop=1
2018-06-13T03:25:20.570Z,1528860320.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:20.578Z,1528860320.578 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2018-06-13T03:25:20.942Z,1528860320.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:21.336Z,1528860321.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:21.720Z,1528860321.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:22.121Z,1528860322.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:22.525Z,1528860322.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:22.924Z,1528860322.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:23.324Z,1528860323.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:23.724Z,1528860323.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:24.153Z,1528860324.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:24.551Z,1528860324.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:24.956Z,1528860324.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:25.355Z,1528860325.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:25.727Z,1528860325.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:26.128Z,1528860326.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:26.526Z,1528860326.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:26.933Z,1528860326.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:27.355Z,1528860327.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:27.729Z,1528860327.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:28.128Z,1528860328.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:28.526Z,1528860328.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:28.932Z,1528860328.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:29.336Z,1528860329.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:29.731Z,1528860329.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:30.139Z,1528860330.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:30.535Z,1528860330.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:30.926Z,1528860330.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:31.330Z,1528860331.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:31.731Z,1528860331.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:32.138Z,1528860332.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:32.527Z,1528860332.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:32.928Z,1528860332.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:33.338Z,1528860333.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:33.748Z,1528860333.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:34.128Z,1528860334.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:34.540Z,1528860334.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:34.941Z,1528860334.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:35.342Z,1528860335.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:35.744Z,1528860335.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:36.132Z,1528860336.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:36.527Z,1528860336.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:36.930Z,1528860336.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:37.327Z,1528860337.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:37.727Z,1528860337.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:38.131Z,1528860338.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:38.529Z,1528860338.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:38.929Z,1528860338.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:39.332Z,1528860339.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:39.748Z,1528860339.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:40.179Z,1528860340.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:40.548Z,1528860340.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:40.938Z,1528860340.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:41.342Z,1528860341.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:41.732Z,1528860341.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:42.135Z,1528860342.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:42.539Z,1528860342.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:42.949Z,1528860342.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:43.344Z,1528860343.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:43.722Z,1528860343.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:44.124Z,1528860344.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:44.524Z,1528860344.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:44.950Z,1528860344.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:45.348Z,1528860345.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:45.750Z,1528860345.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:46.162Z,1528860346.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:46.563Z,1528860346.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:46.924Z,1528860346.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:47.324Z,1528860347.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:47.732Z,1528860347.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:48.124Z,1528860348.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:48.526Z,1528860348.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:48.923Z,1528860348.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:49.328Z,1528860349.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:49.724Z,1528860349.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:50.135Z,1528860350.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:50.560Z,1528860350.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:50.955Z,1528860350.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:51.339Z,1528860351.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:51.728Z,1528860351.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:52.130Z,1528860352.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:52.542Z,1528860352.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:52.937Z,1528860352.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:53.348Z,1528860353.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:53.731Z,1528860353.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:54.130Z,1528860354.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:54.529Z,1528860354.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:54.927Z,1528860354.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:55.356Z,1528860355.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:55.742Z,1528860355.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:56.145Z,1528860356.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:56.538Z,1528860356.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:56.930Z,1528860356.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:57.329Z,1528860357.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:57.731Z,1528860357.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:58.136Z,1528860358.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:58.535Z,1528860358.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:58.948Z,1528860358.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:59.337Z,1528860359.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:25:59.738Z,1528860359.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:00.140Z,1528860360.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:00.542Z,1528860360.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:00.942Z,1528860360.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:01.348Z,1528860361.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:01.742Z,1528860361.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:02.140Z,1528860362.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:02.540Z,1528860362.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:02.937Z,1528860362.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:03.342Z,1528860363.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:03.720Z,1528860363.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:04.121Z,1528860364.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:04.524Z,1528860364.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:04.937Z,1528860364.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:05.320Z,1528860365.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:05.739Z,1528860365.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:06.171Z,1528860366.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:06.560Z,1528860366.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:06.952Z,1528860366.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:07.324Z,1528860367.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:07.724Z,1528860367.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:08.124Z,1528860368.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:08.536Z,1528860368.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:08.929Z,1528860368.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:09.328Z,1528860369.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:09.731Z,1528860369.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:10.128Z,1528860370.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:10.529Z,1528860370.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:10.937Z,1528860370.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:11.340Z,1528860371.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:11.744Z,1528860371.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:12.172Z,1528860372.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:12.531Z,1528860372.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:12.929Z,1528860372.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:13.339Z,1528860373.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:13.738Z,1528860373.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:14.128Z,1528860374.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:14.540Z,1528860374.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:14.931Z,1528860374.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:15.328Z,1528860375.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:15.737Z,1528860375.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:16.138Z,1528860376.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:16.552Z,1528860376.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:16.941Z,1528860376.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:17.342Z,1528860377.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:17.728Z,1528860377.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:18.130Z,1528860378.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:18.531Z,1528860378.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:18.939Z,1528860378.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:19.348Z,1528860379.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:19.736Z,1528860379.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:20.128Z,1528860380.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:20.537Z,1528860380.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:20.540Z,1528860380.540 [Startup:StartupSatComms:A](INFO): Timed out from 2018-06-13T03:25:20.1Z
2018-06-13T03:26:20.540Z,1528860380.540 [Startup:StartupSatComms:A] Stopped
2018-06-13T03:26:20.540Z,1528860380.540 [Startup:StartupSatComms:B] Running Loop=1
2018-06-13T03:26:23.694Z,1528860383.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:23.698Z,1528860383.698 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-06-13T03:26:24.055Z,1528860384.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:24.447Z,1528860384.447 [BPC1](ERROR): Failed to parse Bank B battery data
2018-06-13T03:26:24.460Z,1528860384.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:24.801Z,1528860384.801 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.004394
2018-06-13T03:26:24.888Z,1528860384.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:26.453Z,1528860386.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:26.612Z,1528860386.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:26.995Z,1528860386.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:30.301Z,1528860390.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:30.389Z,1528860390.389 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20180612T222044/Courier0108.lzma
2018-06-13T03:26:30.479Z,1528860390.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:30.855Z,1528860390.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:31.190Z,1528860391.190 [DataOverHttps](INFO): Moved sent file to Logs/20180612T222044/Courier0108.lzma.bak
2018-06-13T03:26:31.190Z,1528860391.190 [DataOverHttps](INFO): SBD MOMSN=8328445
2018-06-13T03:26:31.263Z,1528860391.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:32.368Z,1528860392.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:32.544Z,1528860392.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:32.934Z,1528860392.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:36.074Z,1528860396.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:36.256Z,1528860396.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:36.675Z,1528860396.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:37.066Z,1528860397.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:37.457Z,1528860397.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:37.832Z,1528860397.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:38.230Z,1528860398.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:38.632Z,1528860398.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:39.032Z,1528860399.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:43.517Z,1528860403.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:43.614Z,1528860403.614 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180613T032335/Courier0000.lzma
2018-06-13T03:26:43.687Z,1528860403.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:44.076Z,1528860404.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:44.413Z,1528860404.413 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0000.lzma.bak
2018-06-13T03:26:44.414Z,1528860404.414 [DataOverHttps](INFO): SBD MOMSN=8328447
2018-06-13T03:26:44.483Z,1528860404.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:46.428Z,1528860406.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:46.584Z,1528860406.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:46.971Z,1528860406.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:46.971Z,1528860406.971 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2018-06-13T03:26:46.971Z,1528860406.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T03:26:46.972Z,1528860406.972 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:46.973Z,1528860406.973 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-06-13T03:26:46.973Z,1528860406.973 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T03:26:46.975Z,1528860406.975 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:46.975Z,1528860406.975 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-06-13T03:26:46.975Z,1528860406.975 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T03:26:47.046Z,1528860407.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T03:26:47.046Z,1528860407.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T03:26:47.046Z,1528860407.046 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T03:26:50.253Z,1528860410.253 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T03:26:50.253Z,1528860410.253 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2018-06-13T03:26:50.254Z,1528860410.254 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T03:26:50.254Z,1528860410.254 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-06-13T03:26:50.254Z,1528860410.254 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T03:26:50.254Z,1528860410.254 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-06-13T03:26:50.343Z,1528860410.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T03:26:50.343Z,1528860410.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:26:50.343Z,1528860410.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:26:50.344Z,1528860410.344 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T03:26:50.344Z,1528860410.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:26:50.344Z,1528860410.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:26:50.345Z,1528860410.345 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T03:26:50.345Z,1528860410.345 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:26:50.346Z,1528860410.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:26:50.725Z,1528860410.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T03:26:50.727Z,1528860410.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:51.128Z,1528860411.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T03:26:51.129Z,1528860411.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:51.516Z,1528860411.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T03:26:51.517Z,1528860411.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:51.912Z,1528860411.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T03:26:51.913Z,1528860411.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:52.319Z,1528860412.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T03:26:52.320Z,1528860412.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:52.711Z,1528860412.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T03:26:52.712Z,1528860412.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:53.118Z,1528860413.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T03:26:53.119Z,1528860413.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:56.252Z,1528860416.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T03:26:56.257Z,1528860416.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:56.355Z,1528860416.355 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20180612T222044/Express0109.lzma
2018-06-13T03:26:56.421Z,1528860416.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T03:26:56.422Z,1528860416.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:56.818Z,1528860416.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T03:26:56.819Z,1528860416.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:57.154Z,1528860417.154 [DataOverHttps](INFO): Moved sent file to Logs/20180612T222044/Express0109.lzma.bak
2018-06-13T03:26:57.154Z,1528860417.154 [DataOverHttps](INFO): SBD MOMSN=8328451
2018-06-13T03:26:57.231Z,1528860417.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T03:26:57.232Z,1528860417.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:59.069Z,1528860419.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T03:26:59.070Z,1528860419.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:59.215Z,1528860419.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T03:26:59.216Z,1528860419.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:26:59.624Z,1528860419.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-06-13T03:26:59.625Z,1528860419.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:02.772Z,1528860422.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T03:27:02.773Z,1528860422.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:02.956Z,1528860422.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T03:27:02.957Z,1528860422.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:03.332Z,1528860423.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T03:27:03.333Z,1528860423.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:03.721Z,1528860423.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T03:27:03.722Z,1528860423.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:04.112Z,1528860424.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T03:27:04.113Z,1528860424.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:04.516Z,1528860424.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T03:27:04.517Z,1528860424.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:04.920Z,1528860424.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T03:27:04.921Z,1528860424.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:05.312Z,1528860425.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T03:27:05.313Z,1528860425.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:05.714Z,1528860425.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T03:27:05.714Z,1528860425.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:06.111Z,1528860426.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T03:27:06.112Z,1528860426.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:06.512Z,1528860426.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T03:27:06.513Z,1528860426.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:06.916Z,1528860426.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T03:27:06.917Z,1528860426.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:07.324Z,1528860427.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:10.444Z,1528860430.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:10.560Z,1528860430.560 [DataOverHttps](INFO): Sending 1221 bytes from file Logs/20180613T032335/Express0001.lzma
2018-06-13T03:27:10.658Z,1528860430.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:11.028Z,1528860431.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:11.358Z,1528860431.358 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0001.lzma.bak
2018-06-13T03:27:11.358Z,1528860431.358 [DataOverHttps](INFO): SBD MOMSN=8328453
2018-06-13T03:27:11.435Z,1528860431.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:13.285Z,1528860433.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:13.288Z,1528860433.288 [Startup:StartupSatComms:B] Stopped
2018-06-13T03:27:13.288Z,1528860433.288 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2018-06-13T03:27:13.288Z,1528860433.288 [Startup:StartupSatComms] Stopped
2018-06-13T03:27:13.288Z,1528860433.288 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2018-06-13T03:27:13.289Z,1528860433.289 [Startup](INFO): Completed Startup
2018-06-13T03:27:13.289Z,1528860433.289 [MissionManager](INFO): Startup is completed.
2018-06-13T03:27:13.290Z,1528860433.290 [MissionManager](INFO): Uninitializing Mission Startup
2018-06-13T03:27:13.290Z,1528860433.290 [Startup] Stopped
2018-06-13T03:27:13.290Z,1528860433.290 [Startup](DEBUG): Aggregate::uninitialize Startup
2018-06-13T03:27:13.290Z,1528860433.290 [Startup:A.GoToSurface] Stopped
2018-06-13T03:27:13.290Z,1528860433.290 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-06-13T03:27:13.442Z,1528860433.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:13.445Z,1528860433.445 [MissionManager](IMPORTANT): Started mission Default
2018-06-13T03:27:13.445Z,1528860433.445 [Default] Running Loop=1
2018-06-13T03:27:13.445Z,1528860433.445 [Default](DEBUG): Aggregate::initialize Default
2018-06-13T03:27:13.445Z,1528860433.445 [Default:B.GoToSurface] Running Loop=1
2018-06-13T03:27:13.445Z,1528860433.445 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-06-13T03:27:13.445Z,1528860433.445 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-06-13T03:27:13.446Z,1528860433.446 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-06-13T03:27:13.446Z,1528860433.446 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-06-13T03:27:13.446Z,1528860433.446 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-06-13T03:27:13.447Z,1528860433.447 [Default:B.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-06-13T03:27:13.447Z,1528860433.447 [Default:A.Wait] Running Loop=1
2018-06-13T03:27:13.447Z,1528860433.447 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-06-13T03:27:16.651Z,1528860436.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:16.844Z,1528860436.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:17.229Z,1528860437.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:17.635Z,1528860437.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:18.008Z,1528860438.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:18.432Z,1528860438.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:18.816Z,1528860438.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:19.211Z,1528860439.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:19.613Z,1528860439.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:20.014Z,1528860440.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:20.412Z,1528860440.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:20.816Z,1528860440.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:21.212Z,1528860441.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:21.743Z,1528860441.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:22.050Z,1528860442.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:22.554Z,1528860442.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:22.823Z,1528860442.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:23.280Z,1528860443.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:23.620Z,1528860443.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:24.016Z,1528860444.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:24.416Z,1528860444.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:24.821Z,1528860444.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:25.224Z,1528860445.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:25.624Z,1528860445.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:26.025Z,1528860446.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:26.416Z,1528860446.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:26.833Z,1528860446.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:26.836Z,1528860446.836 [Default:A.Wait](INFO): Done Waiting.
2018-06-13T03:27:26.837Z,1528860446.837 [Default:A.Wait] Stopped
2018-06-13T03:27:26.837Z,1528860446.837 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T03:27:27.232Z,1528860447.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:27.240Z,1528860447.240 [Default:CheckIn] Running Loop=1
2018-06-13T03:27:27.240Z,1528860447.240 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T03:27:27.240Z,1528860447.240 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T03:27:27.626Z,1528860447.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:27.630Z,1528860447.630 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-06-13T03:27:28.048Z,1528860448.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:28.428Z,1528860448.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:28.828Z,1528860448.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:29.232Z,1528860449.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:29.643Z,1528860449.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:30.012Z,1528860450.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:30.412Z,1528860450.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:30.811Z,1528860450.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:31.211Z,1528860451.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:31.612Z,1528860451.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:32.042Z,1528860452.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:32.436Z,1528860452.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:32.820Z,1528860452.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:33.239Z,1528860453.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:33.640Z,1528860453.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:34.037Z,1528860454.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:34.415Z,1528860454.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:34.810Z,1528860454.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:35.240Z,1528860455.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:35.639Z,1528860455.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:36.012Z,1528860456.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:36.419Z,1528860456.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:36.844Z,1528860456.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:37.248Z,1528860457.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:37.621Z,1528860457.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:38.022Z,1528860458.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:38.426Z,1528860458.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:38.816Z,1528860458.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:39.222Z,1528860459.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:39.614Z,1528860459.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:40.041Z,1528860460.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:40.420Z,1528860460.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:40.815Z,1528860460.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:41.224Z,1528860461.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:41.632Z,1528860461.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:42.022Z,1528860462.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:42.460Z,1528860462.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:42.827Z,1528860462.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:43.236Z,1528860463.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:43.626Z,1528860463.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:44.030Z,1528860464.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:44.413Z,1528860464.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:44.830Z,1528860464.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:45.216Z,1528860465.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:45.613Z,1528860465.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:46.020Z,1528860466.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:46.431Z,1528860466.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:46.811Z,1528860466.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:47.216Z,1528860467.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:47.626Z,1528860467.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:48.034Z,1528860468.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:48.430Z,1528860468.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:48.828Z,1528860468.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:49.217Z,1528860469.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:49.633Z,1528860469.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:50.019Z,1528860470.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:50.420Z,1528860470.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:50.827Z,1528860470.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:51.228Z,1528860471.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:51.623Z,1528860471.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:52.017Z,1528860472.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:52.419Z,1528860472.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:52.856Z,1528860472.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:53.226Z,1528860473.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:53.631Z,1528860473.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:54.025Z,1528860474.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:54.428Z,1528860474.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:54.831Z,1528860474.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:55.219Z,1528860475.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:55.619Z,1528860475.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:56.016Z,1528860476.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:56.417Z,1528860476.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:56.814Z,1528860476.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:57.223Z,1528860477.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:57.620Z,1528860477.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:58.040Z,1528860478.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:58.431Z,1528860478.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:58.833Z,1528860478.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:59.236Z,1528860479.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:27:59.615Z,1528860479.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:00.013Z,1528860480.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:00.419Z,1528860480.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:00.814Z,1528860480.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:01.219Z,1528860481.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:01.612Z,1528860481.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:02.020Z,1528860482.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:02.414Z,1528860482.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:02.812Z,1528860482.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:03.235Z,1528860483.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:03.626Z,1528860483.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:04.025Z,1528860484.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:04.432Z,1528860484.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:04.819Z,1528860484.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:05.214Z,1528860485.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:05.615Z,1528860485.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:06.018Z,1528860486.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:06.418Z,1528860486.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:06.819Z,1528860486.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:07.226Z,1528860487.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:07.622Z,1528860487.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:08.024Z,1528860488.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:08.435Z,1528860488.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:08.826Z,1528860488.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:09.232Z,1528860489.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:09.623Z,1528860489.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:10.029Z,1528860490.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:10.416Z,1528860490.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:10.804Z,1528860490.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:11.204Z,1528860491.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:11.605Z,1528860491.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:12.009Z,1528860492.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:12.408Z,1528860492.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:12.809Z,1528860492.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:13.208Z,1528860493.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:13.637Z,1528860493.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:14.038Z,1528860494.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:17.148Z,1528860497.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:17.308Z,1528860497.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:17.692Z,1528860497.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:18.092Z,1528860498.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:18.493Z,1528860498.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:18.912Z,1528860498.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:19.296Z,1528860499.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:19.700Z,1528860499.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:20.102Z,1528860500.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:20.489Z,1528860500.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:20.894Z,1528860500.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:21.289Z,1528860501.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:21.698Z,1528860501.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:22.101Z,1528860502.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:22.479Z,1528860502.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:22.900Z,1528860502.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:23.307Z,1528860503.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:23.682Z,1528860503.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:24.112Z,1528860504.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:24.503Z,1528860504.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:24.916Z,1528860504.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:25.306Z,1528860505.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:25.684Z,1528860505.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:26.083Z,1528860506.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:26.504Z,1528860506.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:26.886Z,1528860506.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:27.285Z,1528860507.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:27.678Z,1528860507.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:28.106Z,1528860508.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:28.485Z,1528860508.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:28.884Z,1528860508.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:29.308Z,1528860509.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:29.713Z,1528860509.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:30.108Z,1528860510.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:30.509Z,1528860510.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:30.883Z,1528860510.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:31.304Z,1528860511.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:31.705Z,1528860511.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:32.085Z,1528860512.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:32.483Z,1528860512.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:32.912Z,1528860512.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:33.282Z,1528860513.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:33.685Z,1528860513.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:34.084Z,1528860514.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:34.518Z,1528860514.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:34.885Z,1528860514.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:35.311Z,1528860515.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:35.716Z,1528860515.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:36.116Z,1528860516.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:36.488Z,1528860516.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:36.889Z,1528860516.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:37.287Z,1528860517.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:37.717Z,1528860517.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:38.084Z,1528860518.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:38.488Z,1528860518.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:38.887Z,1528860518.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:39.295Z,1528860519.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:39.696Z,1528860519.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:40.096Z,1528860520.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:40.495Z,1528860520.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:40.921Z,1528860520.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:41.288Z,1528860521.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:41.693Z,1528860521.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:42.084Z,1528860522.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:42.488Z,1528860522.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:42.893Z,1528860522.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:43.284Z,1528860523.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:43.690Z,1528860523.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:44.084Z,1528860524.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:44.481Z,1528860524.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:44.900Z,1528860524.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:45.298Z,1528860525.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:45.724Z,1528860525.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:46.102Z,1528860526.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:46.484Z,1528860526.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:46.881Z,1528860526.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:47.284Z,1528860527.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:47.683Z,1528860527.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:48.084Z,1528860528.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:48.485Z,1528860528.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:48.883Z,1528860528.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:49.280Z,1528860529.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:49.682Z,1528860529.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:50.101Z,1528860530.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:50.488Z,1528860530.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:50.896Z,1528860530.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:51.292Z,1528860531.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:51.680Z,1528860531.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:52.084Z,1528860532.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:52.484Z,1528860532.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:52.882Z,1528860532.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:53.282Z,1528860533.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:53.684Z,1528860533.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:54.081Z,1528860534.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:54.483Z,1528860534.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:54.900Z,1528860534.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:55.296Z,1528860535.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:55.692Z,1528860535.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:56.093Z,1528860536.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:56.498Z,1528860536.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:56.885Z,1528860536.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:57.284Z,1528860537.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:57.688Z,1528860537.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:58.084Z,1528860538.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:58.497Z,1528860538.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:58.890Z,1528860538.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:59.284Z,1528860539.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:28:59.688Z,1528860539.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:00.085Z,1528860540.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:00.504Z,1528860540.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:00.898Z,1528860540.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:01.300Z,1528860541.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:01.698Z,1528860541.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:02.088Z,1528860542.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:02.492Z,1528860542.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:02.885Z,1528860542.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:03.288Z,1528860543.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:03.686Z,1528860543.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:04.092Z,1528860544.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:04.496Z,1528860544.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:04.892Z,1528860544.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:05.290Z,1528860545.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:05.698Z,1528860545.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:06.091Z,1528860546.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:06.498Z,1528860546.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:06.898Z,1528860546.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:07.272Z,1528860547.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:07.676Z,1528860547.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:08.081Z,1528860548.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:08.479Z,1528860548.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:08.879Z,1528860548.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:09.280Z,1528860549.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:09.680Z,1528860549.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:10.080Z,1528860550.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:10.480Z,1528860550.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:10.892Z,1528860550.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:11.288Z,1528860551.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:11.696Z,1528860551.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:12.092Z,1528860552.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:12.480Z,1528860552.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:12.893Z,1528860552.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:13.279Z,1528860553.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:13.686Z,1528860553.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:14.088Z,1528860554.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:17.224Z,1528860557.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:17.384Z,1528860557.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:17.783Z,1528860557.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:18.188Z,1528860558.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:18.566Z,1528860558.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:18.984Z,1528860558.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:19.375Z,1528860559.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:19.772Z,1528860559.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:20.171Z,1528860560.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:20.570Z,1528860560.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:20.976Z,1528860560.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:21.369Z,1528860561.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:21.774Z,1528860561.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:22.184Z,1528860562.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:22.592Z,1528860562.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:22.979Z,1528860562.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:23.376Z,1528860563.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:23.778Z,1528860563.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:24.182Z,1528860564.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:24.552Z,1528860564.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:24.976Z,1528860564.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:25.361Z,1528860565.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:25.785Z,1528860565.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:26.157Z,1528860566.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:26.559Z,1528860566.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:26.961Z,1528860566.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:27.322Z,1528860567.322 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-06-13T03:29:27.357Z,1528860567.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:27.762Z,1528860567.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:28.192Z,1528860568.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:28.576Z,1528860568.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:28.997Z,1528860568.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:29.378Z,1528860569.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:29.773Z,1528860569.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:30.167Z,1528860570.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:30.561Z,1528860570.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:30.983Z,1528860570.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:31.378Z,1528860571.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:31.774Z,1528860571.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:32.166Z,1528860572.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:32.575Z,1528860572.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:32.975Z,1528860572.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:33.382Z,1528860573.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:33.796Z,1528860573.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:34.172Z,1528860574.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:34.574Z,1528860574.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:34.975Z,1528860574.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:35.370Z,1528860575.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:35.775Z,1528860575.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:36.176Z,1528860576.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:36.552Z,1528860576.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:36.954Z,1528860576.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:37.353Z,1528860577.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:37.756Z,1528860577.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:38.186Z,1528860578.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:38.567Z,1528860578.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:38.963Z,1528860578.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:39.360Z,1528860579.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:39.756Z,1528860579.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:40.159Z,1528860580.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:40.564Z,1528860580.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:40.956Z,1528860580.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:41.389Z,1528860581.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:41.767Z,1528860581.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:42.168Z,1528860582.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:42.564Z,1528860582.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:42.986Z,1528860582.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:43.357Z,1528860583.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:43.759Z,1528860583.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:44.167Z,1528860584.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:44.564Z,1528860584.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:44.968Z,1528860584.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:45.364Z,1528860585.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:45.757Z,1528860585.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:46.161Z,1528860586.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:46.561Z,1528860586.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:46.956Z,1528860586.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:47.370Z,1528860587.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:47.769Z,1528860587.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:48.168Z,1528860588.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:48.569Z,1528860588.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:48.979Z,1528860588.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:49.364Z,1528860589.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:49.771Z,1528860589.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:50.175Z,1528860590.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:50.569Z,1528860590.569 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:50.569Z,1528860590.569 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2018-06-13T03:29:50.569Z,1528860590.569 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T03:29:50.571Z,1528860590.571 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:50.571Z,1528860590.571 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-06-13T03:29:50.571Z,1528860590.571 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T03:29:50.573Z,1528860590.573 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:50.573Z,1528860590.573 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-06-13T03:29:50.573Z,1528860590.573 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T03:29:50.653Z,1528860590.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T03:29:50.653Z,1528860590.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T03:29:50.654Z,1528860590.654 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T03:29:51.049Z,1528860591.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T03:29:51.049Z,1528860591.049 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2018-06-13T03:29:51.049Z,1528860591.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T03:29:51.049Z,1528860591.049 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-06-13T03:29:51.050Z,1528860591.050 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T03:29:51.050Z,1528860591.050 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-06-13T03:29:51.368Z,1528860591.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T03:29:51.368Z,1528860591.368 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:29:51.373Z,1528860591.373 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:29:51.373Z,1528860591.373 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T03:29:51.374Z,1528860591.374 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:29:51.374Z,1528860591.374 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:29:51.374Z,1528860591.374 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T03:29:51.375Z,1528860591.375 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:29:51.375Z,1528860591.375 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:29:51.748Z,1528860591.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T03:29:51.761Z,1528860591.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:52.169Z,1528860592.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T03:29:52.170Z,1528860592.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:52.549Z,1528860592.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T03:29:52.549Z,1528860592.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:52.952Z,1528860592.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T03:29:52.953Z,1528860592.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:53.370Z,1528860593.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T03:29:53.371Z,1528860593.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:53.786Z,1528860593.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T03:29:53.787Z,1528860593.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:54.164Z,1528860594.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T03:29:54.165Z,1528860594.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:54.558Z,1528860594.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T03:29:54.559Z,1528860594.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:54.955Z,1528860594.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T03:29:54.956Z,1528860594.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:55.356Z,1528860595.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T03:29:55.357Z,1528860595.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:55.759Z,1528860595.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T03:29:55.760Z,1528860595.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:56.167Z,1528860596.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T03:29:56.168Z,1528860596.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:56.566Z,1528860596.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T03:29:56.567Z,1528860596.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:56.968Z,1528860596.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T03:29:56.969Z,1528860596.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:57.358Z,1528860597.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T03:29:57.359Z,1528860597.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:57.756Z,1528860597.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T03:29:57.757Z,1528860597.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:58.159Z,1528860598.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T03:29:58.160Z,1528860598.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:58.566Z,1528860598.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T03:29:58.567Z,1528860598.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:58.957Z,1528860598.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T03:29:58.958Z,1528860598.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:59.367Z,1528860599.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T03:29:59.368Z,1528860599.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:29:59.772Z,1528860599.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T03:29:59.773Z,1528860599.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:00.166Z,1528860600.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T03:30:00.167Z,1528860600.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:00.552Z,1528860600.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T03:30:00.569Z,1528860600.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:00.953Z,1528860600.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T03:30:00.954Z,1528860600.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:01.349Z,1528860601.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T03:30:01.350Z,1528860601.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:01.752Z,1528860601.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T03:30:01.753Z,1528860601.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:02.183Z,1528860602.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T03:30:02.184Z,1528860602.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:02.577Z,1528860602.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T03:30:02.578Z,1528860602.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:02.980Z,1528860602.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T03:30:02.981Z,1528860602.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:03.355Z,1528860603.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T03:30:03.356Z,1528860603.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:03.753Z,1528860603.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T03:30:03.754Z,1528860603.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:04.154Z,1528860604.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T03:30:04.155Z,1528860604.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:04.556Z,1528860604.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T03:30:04.557Z,1528860604.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:04.958Z,1528860604.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T03:30:04.959Z,1528860604.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:05.386Z,1528860605.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T03:30:05.387Z,1528860605.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:05.767Z,1528860605.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T03:30:05.768Z,1528860605.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:06.159Z,1528860606.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T03:30:06.160Z,1528860606.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:06.559Z,1528860606.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T03:30:06.560Z,1528860606.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:06.955Z,1528860606.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T03:30:06.956Z,1528860606.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:07.359Z,1528860607.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T03:30:07.360Z,1528860607.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:07.759Z,1528860607.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T03:30:07.760Z,1528860607.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:08.166Z,1528860608.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T03:30:08.167Z,1528860608.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:08.567Z,1528860608.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T03:30:08.568Z,1528860608.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:08.968Z,1528860608.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T03:30:08.969Z,1528860608.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:09.359Z,1528860609.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T03:30:09.360Z,1528860609.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:09.758Z,1528860609.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T03:30:09.759Z,1528860609.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:10.159Z,1528860610.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T03:30:10.160Z,1528860610.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:10.567Z,1528860610.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T03:30:10.568Z,1528860610.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:10.958Z,1528860610.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:11.371Z,1528860611.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:11.766Z,1528860611.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:12.167Z,1528860612.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:12.560Z,1528860612.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:12.959Z,1528860612.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:13.364Z,1528860613.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:13.762Z,1528860613.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:14.170Z,1528860614.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:14.571Z,1528860614.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:14.967Z,1528860614.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:15.364Z,1528860615.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:18.470Z,1528860618.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:18.647Z,1528860618.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:19.050Z,1528860619.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:19.447Z,1528860619.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:19.840Z,1528860619.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:20.216Z,1528860620.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:20.618Z,1528860620.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:21.018Z,1528860621.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:21.428Z,1528860621.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:21.828Z,1528860621.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:22.224Z,1528860622.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:22.619Z,1528860622.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:23.024Z,1528860623.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:23.419Z,1528860623.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:23.819Z,1528860623.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:24.224Z,1528860624.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:24.627Z,1528860624.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:25.028Z,1528860625.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:25.419Z,1528860625.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:25.818Z,1528860625.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:26.221Z,1528860626.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:26.620Z,1528860626.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:27.019Z,1528860627.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:27.428Z,1528860627.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:27.828Z,1528860627.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:28.225Z,1528860628.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:28.623Z,1528860628.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:29.024Z,1528860629.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:29.422Z,1528860629.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:29.823Z,1528860629.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:30.232Z,1528860630.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:30.628Z,1528860630.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:31.032Z,1528860631.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:31.419Z,1528860631.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:31.829Z,1528860631.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:32.240Z,1528860632.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:32.627Z,1528860632.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:33.031Z,1528860633.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:33.438Z,1528860633.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:33.832Z,1528860633.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:34.240Z,1528860634.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:34.639Z,1528860634.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:35.031Z,1528860635.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:35.434Z,1528860635.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:35.836Z,1528860635.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:36.235Z,1528860636.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:36.644Z,1528860636.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:37.048Z,1528860637.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:37.409Z,1528860637.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:37.836Z,1528860637.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:38.218Z,1528860638.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:38.624Z,1528860638.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:39.016Z,1528860639.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:39.428Z,1528860639.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:39.828Z,1528860639.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:40.224Z,1528860640.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:40.620Z,1528860640.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:41.019Z,1528860641.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:41.419Z,1528860641.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:41.834Z,1528860641.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:42.229Z,1528860642.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:42.632Z,1528860642.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:43.029Z,1528860643.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:43.424Z,1528860643.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:43.828Z,1528860643.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:44.234Z,1528860644.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:44.631Z,1528860644.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:45.030Z,1528860645.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:45.435Z,1528860645.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:45.832Z,1528860645.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:46.232Z,1528860646.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:46.627Z,1528860646.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:47.009Z,1528860647.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:47.422Z,1528860647.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:47.844Z,1528860647.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:48.242Z,1528860648.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:48.644Z,1528860648.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:49.042Z,1528860649.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:49.418Z,1528860649.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:49.814Z,1528860649.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:50.218Z,1528860650.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:50.617Z,1528860650.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:51.016Z,1528860651.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:51.445Z,1528860651.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:51.848Z,1528860651.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:52.224Z,1528860652.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:52.624Z,1528860652.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:53.018Z,1528860653.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:53.419Z,1528860653.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:53.825Z,1528860653.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:54.220Z,1528860654.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:54.628Z,1528860654.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:55.028Z,1528860655.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:55.420Z,1528860655.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:55.820Z,1528860655.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:56.220Z,1528860656.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:56.616Z,1528860656.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:57.018Z,1528860657.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:57.428Z,1528860657.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:57.828Z,1528860657.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:58.225Z,1528860658.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:58.620Z,1528860658.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:59.016Z,1528860659.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:59.418Z,1528860659.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:30:59.819Z,1528860659.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:00.224Z,1528860660.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:00.627Z,1528860660.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:01.029Z,1528860661.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:01.425Z,1528860661.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:01.819Z,1528860661.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:02.220Z,1528860662.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:02.620Z,1528860662.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:03.021Z,1528860663.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:03.428Z,1528860663.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:03.827Z,1528860663.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:04.228Z,1528860664.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:04.620Z,1528860664.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:05.015Z,1528860665.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:05.419Z,1528860665.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:05.841Z,1528860665.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:06.228Z,1528860666.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:06.627Z,1528860666.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:07.052Z,1528860667.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:07.419Z,1528860667.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:07.819Z,1528860667.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:08.306Z,1528860668.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:08.616Z,1528860668.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:09.020Z,1528860669.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:09.428Z,1528860669.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:09.828Z,1528860669.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:10.228Z,1528860670.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:10.631Z,1528860670.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:11.024Z,1528860671.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:11.433Z,1528860671.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:11.836Z,1528860671.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:12.235Z,1528860672.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:12.635Z,1528860672.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:13.036Z,1528860673.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:13.430Z,1528860673.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:13.830Z,1528860673.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:14.235Z,1528860674.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:17.333Z,1528860677.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:17.496Z,1528860677.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:17.889Z,1528860677.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:18.287Z,1528860678.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:18.684Z,1528860678.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:19.084Z,1528860679.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:19.479Z,1528860679.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:19.879Z,1528860679.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:20.292Z,1528860680.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:20.684Z,1528860680.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:21.088Z,1528860681.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:21.478Z,1528860681.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:21.888Z,1528860681.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:22.264Z,1528860682.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:22.684Z,1528860682.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:23.068Z,1528860683.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:23.496Z,1528860683.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:23.899Z,1528860683.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:24.275Z,1528860684.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:24.670Z,1528860684.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:25.076Z,1528860685.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:25.476Z,1528860685.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:25.870Z,1528860685.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:26.279Z,1528860686.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:26.679Z,1528860686.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:27.075Z,1528860687.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:27.472Z,1528860687.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:27.867Z,1528860687.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:28.271Z,1528860688.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:28.672Z,1528860688.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:29.071Z,1528860689.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:29.475Z,1528860689.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:29.879Z,1528860689.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:30.280Z,1528860690.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:30.670Z,1528860690.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:31.072Z,1528860691.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:31.471Z,1528860691.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:31.870Z,1528860691.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:32.284Z,1528860692.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:32.677Z,1528860692.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:33.079Z,1528860693.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:33.473Z,1528860693.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:33.872Z,1528860693.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:34.271Z,1528860694.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:34.683Z,1528860694.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:35.080Z,1528860695.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:35.481Z,1528860695.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:35.886Z,1528860695.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:36.281Z,1528860696.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:36.673Z,1528860696.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:37.081Z,1528860697.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:37.472Z,1528860697.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:37.872Z,1528860697.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:38.287Z,1528860698.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:38.683Z,1528860698.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:39.082Z,1528860699.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:39.482Z,1528860699.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:39.877Z,1528860699.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:40.264Z,1528860700.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:40.666Z,1528860700.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:41.068Z,1528860701.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:41.492Z,1528860701.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:41.893Z,1528860701.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:42.292Z,1528860702.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:42.672Z,1528860702.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:43.072Z,1528860703.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:43.472Z,1528860703.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:43.867Z,1528860703.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:44.295Z,1528860704.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:44.699Z,1528860704.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:45.075Z,1528860705.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:45.480Z,1528860705.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:45.871Z,1528860705.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:46.271Z,1528860706.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:46.683Z,1528860706.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:47.077Z,1528860707.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:47.480Z,1528860707.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:47.881Z,1528860707.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:48.284Z,1528860708.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:48.678Z,1528860708.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:49.075Z,1528860709.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:49.470Z,1528860709.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:49.872Z,1528860709.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:50.281Z,1528860710.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:50.681Z,1528860710.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:51.084Z,1528860711.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:51.482Z,1528860711.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:51.878Z,1528860711.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:52.272Z,1528860712.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:52.676Z,1528860712.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:53.072Z,1528860713.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:53.482Z,1528860713.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:53.886Z,1528860713.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:54.277Z,1528860714.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:54.672Z,1528860714.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:55.084Z,1528860715.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:55.478Z,1528860715.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:55.873Z,1528860715.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:56.287Z,1528860716.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:56.681Z,1528860716.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:57.092Z,1528860717.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:57.478Z,1528860717.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:57.873Z,1528860717.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:58.275Z,1528860718.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:58.683Z,1528860718.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:59.082Z,1528860719.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:59.485Z,1528860719.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:31:59.892Z,1528860719.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:00.291Z,1528860720.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:00.672Z,1528860720.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:01.064Z,1528860721.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:01.461Z,1528860721.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:01.864Z,1528860721.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:02.290Z,1528860722.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:02.697Z,1528860722.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:03.086Z,1528860723.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:03.467Z,1528860723.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:03.864Z,1528860723.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:04.264Z,1528860724.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:04.669Z,1528860724.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:05.065Z,1528860725.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:05.491Z,1528860725.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:05.893Z,1528860725.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:06.293Z,1528860726.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:06.668Z,1528860726.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:07.069Z,1528860727.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:07.465Z,1528860727.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:07.868Z,1528860727.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:08.292Z,1528860728.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:08.694Z,1528860728.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:09.094Z,1528860729.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:09.468Z,1528860729.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:09.873Z,1528860729.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:10.272Z,1528860730.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:10.673Z,1528860730.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:11.072Z,1528860731.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:11.495Z,1528860731.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:11.899Z,1528860731.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:12.296Z,1528860732.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:12.687Z,1528860732.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:13.068Z,1528860733.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:13.469Z,1528860733.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:13.872Z,1528860733.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:14.301Z,1528860734.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:17.404Z,1528860737.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:17.572Z,1528860737.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:17.953Z,1528860737.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:18.353Z,1528860738.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:18.760Z,1528860738.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:19.132Z,1528860739.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:19.559Z,1528860739.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:19.964Z,1528860739.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:20.368Z,1528860740.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:20.754Z,1528860740.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:21.160Z,1528860741.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:21.542Z,1528860741.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:21.944Z,1528860741.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:22.368Z,1528860742.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:22.771Z,1528860742.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:23.168Z,1528860743.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:23.540Z,1528860743.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:23.939Z,1528860743.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:24.340Z,1528860744.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:24.739Z,1528860744.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:25.139Z,1528860745.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:25.567Z,1528860745.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:25.967Z,1528860745.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:26.373Z,1528860746.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:26.740Z,1528860746.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:27.139Z,1528860747.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:27.544Z,1528860747.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:27.547Z,1528860747.547 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T03:27:27.2Z
2018-06-13T03:32:27.547Z,1528860747.547 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T03:32:27.547Z,1528860747.547 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T03:32:27.940Z,1528860747.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:27.943Z,1528860747.943 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-06-13T03:32:29.126Z,1528860749.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:29.293Z,1528860749.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:32.399Z,1528860752.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:32.481Z,1528860752.481 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0004.lzma
2018-06-13T03:32:32.534Z,1528860752.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:32.938Z,1528860752.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:33.282Z,1528860753.282 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0004.lzma.bak
2018-06-13T03:32:33.282Z,1528860753.282 [DataOverHttps](INFO): SBD MOMSN=8328491
2018-06-13T03:32:33.338Z,1528860753.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:35.218Z,1528860755.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:35.368Z,1528860755.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:35.795Z,1528860755.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:38.899Z,1528860758.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:39.068Z,1528860759.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:39.449Z,1528860759.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:39.838Z,1528860759.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:40.245Z,1528860760.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:40.656Z,1528860760.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:41.056Z,1528860761.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:41.458Z,1528860761.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:41.832Z,1528860761.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:44.960Z,1528860764.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:45.058Z,1528860765.058 [DataOverHttps](INFO): Sending 176 bytes from file Logs/20180613T032335/Express0005.lzma
2018-06-13T03:32:45.123Z,1528860765.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:45.521Z,1528860765.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:45.858Z,1528860765.858 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0005.lzma.bak
2018-06-13T03:32:45.858Z,1528860765.858 [DataOverHttps](INFO): SBD MOMSN=8328493
2018-06-13T03:32:45.931Z,1528860765.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:47.819Z,1528860767.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:47.822Z,1528860767.822 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T03:32:47.822Z,1528860767.822 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T03:32:47.822Z,1528860767.822 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T03:32:47.975Z,1528860767.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:51.079Z,1528860771.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:51.231Z,1528860771.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:51.634Z,1528860771.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:51.634Z,1528860771.634 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2018-06-13T03:32:51.634Z,1528860771.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T03:32:51.636Z,1528860771.636 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:51.636Z,1528860771.636 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-06-13T03:32:51.636Z,1528860771.636 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T03:32:51.638Z,1528860771.638 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:51.638Z,1528860771.638 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-06-13T03:32:51.638Z,1528860771.638 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T03:32:51.718Z,1528860771.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T03:32:51.718Z,1528860771.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T03:32:51.719Z,1528860771.719 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T03:32:52.137Z,1528860772.137 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T03:32:52.137Z,1528860772.137 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2018-06-13T03:32:52.138Z,1528860772.138 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T03:32:52.138Z,1528860772.138 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-06-13T03:32:52.138Z,1528860772.138 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T03:32:52.138Z,1528860772.138 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-06-13T03:32:52.418Z,1528860772.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T03:32:52.418Z,1528860772.418 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:32:52.419Z,1528860772.419 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:32:52.419Z,1528860772.419 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T03:32:52.419Z,1528860772.419 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:32:52.420Z,1528860772.420 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:32:52.420Z,1528860772.420 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T03:32:52.420Z,1528860772.420 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:32:52.421Z,1528860772.421 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:32:52.819Z,1528860772.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T03:32:52.820Z,1528860772.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:53.217Z,1528860773.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T03:32:53.218Z,1528860773.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:53.616Z,1528860773.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T03:32:53.617Z,1528860773.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:54.018Z,1528860774.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T03:32:54.019Z,1528860774.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:54.426Z,1528860774.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T03:32:54.427Z,1528860774.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:54.818Z,1528860774.818 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T03:32:54.818Z,1528860774.818 [BPC1] Communications Fault, FailCount= 1
2018-06-13T03:32:54.819Z,1528860774.819 [BPC1](ERROR): Communications Fault
2018-06-13T03:32:54.828Z,1528860774.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T03:32:54.829Z,1528860774.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:54.933Z,1528860774.933 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T03:32:55.227Z,1528860775.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T03:32:55.228Z,1528860775.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:55.618Z,1528860775.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T03:32:55.619Z,1528860775.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:56.017Z,1528860776.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T03:32:56.018Z,1528860776.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:56.097Z,1528860776.097 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T03:32:56.097Z,1528860776.097 [BPC1] No Fault, FailCount= 1
2018-06-13T03:32:56.672Z,1528860776.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T03:32:56.673Z,1528860776.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:57.003Z,1528860777.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T03:32:57.005Z,1528860777.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:57.277Z,1528860777.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T03:32:57.278Z,1528860777.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:57.794Z,1528860777.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T03:32:57.795Z,1528860777.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:58.088Z,1528860778.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T03:32:58.089Z,1528860778.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:58.574Z,1528860778.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T03:32:58.575Z,1528860778.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:58.880Z,1528860778.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T03:32:58.880Z,1528860778.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:59.282Z,1528860779.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T03:32:59.283Z,1528860779.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:32:59.683Z,1528860779.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T03:32:59.685Z,1528860779.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:00.086Z,1528860780.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T03:33:00.087Z,1528860780.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:00.479Z,1528860780.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T03:33:00.480Z,1528860780.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:00.881Z,1528860780.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T03:33:00.882Z,1528860780.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:01.278Z,1528860781.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T03:33:01.279Z,1528860781.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:01.685Z,1528860781.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T03:33:01.686Z,1528860781.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:02.082Z,1528860782.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T03:33:02.082Z,1528860782.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:02.481Z,1528860782.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T03:33:02.482Z,1528860782.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:02.869Z,1528860782.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T03:33:02.870Z,1528860782.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:03.288Z,1528860783.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T03:33:03.290Z,1528860783.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:03.678Z,1528860783.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T03:33:03.679Z,1528860783.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:04.087Z,1528860784.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T03:33:04.088Z,1528860784.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:04.482Z,1528860784.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T03:33:04.483Z,1528860784.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:04.889Z,1528860784.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T03:33:04.890Z,1528860784.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:05.259Z,1528860785.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T03:33:05.260Z,1528860785.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:05.684Z,1528860785.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T03:33:05.689Z,1528860785.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:06.060Z,1528860786.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T03:33:06.061Z,1528860786.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:06.494Z,1528860786.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T03:33:06.495Z,1528860786.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:06.895Z,1528860786.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T03:33:06.896Z,1528860786.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:07.275Z,1528860787.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T03:33:07.275Z,1528860787.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:07.664Z,1528860787.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T03:33:07.665Z,1528860787.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:08.067Z,1528860788.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T03:33:08.068Z,1528860788.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:08.468Z,1528860788.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T03:33:08.468Z,1528860788.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:08.863Z,1528860788.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T03:33:08.864Z,1528860788.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:09.267Z,1528860789.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T03:33:09.268Z,1528860789.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:09.675Z,1528860789.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T03:33:09.676Z,1528860789.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:10.075Z,1528860790.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T03:33:10.076Z,1528860790.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:10.472Z,1528860790.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T03:33:10.473Z,1528860790.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:10.868Z,1528860790.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T03:33:10.869Z,1528860790.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:11.263Z,1528860791.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T03:33:11.264Z,1528860791.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:11.670Z,1528860791.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:12.068Z,1528860792.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:12.476Z,1528860792.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:12.880Z,1528860792.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:13.276Z,1528860793.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:13.663Z,1528860793.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:14.068Z,1528860794.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:14.467Z,1528860794.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:14.864Z,1528860794.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:15.276Z,1528860795.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:15.681Z,1528860795.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:16.077Z,1528860796.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:16.475Z,1528860796.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:16.878Z,1528860796.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:17.276Z,1528860797.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:17.678Z,1528860797.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:18.074Z,1528860798.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:18.480Z,1528860798.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:18.877Z,1528860798.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:19.280Z,1528860799.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:19.675Z,1528860799.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:20.076Z,1528860800.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:20.476Z,1528860800.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:20.881Z,1528860800.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:21.283Z,1528860801.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:21.688Z,1528860801.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:22.093Z,1528860802.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:22.483Z,1528860802.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:22.880Z,1528860802.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:23.256Z,1528860803.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:23.661Z,1528860803.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:24.061Z,1528860804.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:24.492Z,1528860804.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:24.890Z,1528860804.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:25.291Z,1528860805.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:25.662Z,1528860805.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:26.072Z,1528860806.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:26.464Z,1528860806.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:26.864Z,1528860806.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:27.263Z,1528860807.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:27.691Z,1528860807.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:28.102Z,1528860808.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:28.475Z,1528860808.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:28.865Z,1528860808.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:29.264Z,1528860809.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:29.665Z,1528860809.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:30.064Z,1528860810.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:30.470Z,1528860810.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:30.872Z,1528860810.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:31.275Z,1528860811.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:31.667Z,1528860811.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:32.065Z,1528860812.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:32.472Z,1528860812.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:32.868Z,1528860812.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:33.264Z,1528860813.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:33.672Z,1528860813.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:34.075Z,1528860814.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:34.472Z,1528860814.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:34.868Z,1528860814.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:35.266Z,1528860815.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:35.664Z,1528860815.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:36.065Z,1528860816.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:36.474Z,1528860816.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:36.875Z,1528860816.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:37.271Z,1528860817.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:37.664Z,1528860817.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:38.063Z,1528860818.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:38.466Z,1528860818.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:38.867Z,1528860818.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:39.264Z,1528860819.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:39.672Z,1528860819.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:40.070Z,1528860820.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:40.499Z,1528860820.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:40.868Z,1528860820.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:41.266Z,1528860821.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:41.668Z,1528860821.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:42.072Z,1528860822.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:42.469Z,1528860822.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:42.875Z,1528860822.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:43.271Z,1528860823.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:43.665Z,1528860823.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:44.064Z,1528860824.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:44.466Z,1528860824.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:44.866Z,1528860824.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:45.264Z,1528860825.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:45.671Z,1528860825.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:46.074Z,1528860826.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:46.468Z,1528860826.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:46.866Z,1528860826.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:47.267Z,1528860827.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:47.663Z,1528860827.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:48.068Z,1528860828.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:48.503Z,1528860828.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:48.875Z,1528860828.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:49.295Z,1528860829.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:49.667Z,1528860829.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:52.779Z,1528860832.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:52.960Z,1528860832.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:53.352Z,1528860833.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:53.755Z,1528860833.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:54.154Z,1528860834.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:54.530Z,1528860834.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:54.932Z,1528860834.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:55.328Z,1528860835.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:55.759Z,1528860835.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:56.156Z,1528860836.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:56.559Z,1528860836.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:56.929Z,1528860836.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:57.364Z,1528860837.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:57.736Z,1528860837.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:58.138Z,1528860838.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:58.536Z,1528860838.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:58.966Z,1528860838.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:59.367Z,1528860839.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:33:59.731Z,1528860839.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:00.132Z,1528860840.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:00.532Z,1528860840.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:00.929Z,1528860840.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:01.330Z,1528860841.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:01.739Z,1528860841.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:02.140Z,1528860842.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:02.540Z,1528860842.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:02.937Z,1528860842.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:03.348Z,1528860843.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:03.731Z,1528860843.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:04.138Z,1528860844.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:04.541Z,1528860844.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:04.956Z,1528860844.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:05.346Z,1528860845.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:05.737Z,1528860845.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:06.132Z,1528860846.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:06.536Z,1528860846.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:06.934Z,1528860846.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:07.332Z,1528860847.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:07.745Z,1528860847.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:08.143Z,1528860848.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:08.543Z,1528860848.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:08.946Z,1528860848.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:09.340Z,1528860849.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:09.733Z,1528860849.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:10.125Z,1528860850.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:10.547Z,1528860850.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:10.955Z,1528860850.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:11.339Z,1528860851.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:11.731Z,1528860851.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:12.130Z,1528860852.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:12.532Z,1528860852.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:12.928Z,1528860852.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:13.330Z,1528860853.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:13.740Z,1528860853.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:14.137Z,1528860854.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:14.536Z,1528860854.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:14.938Z,1528860854.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:15.348Z,1528860855.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:15.743Z,1528860855.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:16.132Z,1528860856.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:16.545Z,1528860856.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:16.944Z,1528860856.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:17.352Z,1528860857.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:17.732Z,1528860857.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:18.129Z,1528860858.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:18.544Z,1528860858.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:18.930Z,1528860858.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:19.333Z,1528860859.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:19.746Z,1528860859.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:20.142Z,1528860860.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:20.542Z,1528860860.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:20.946Z,1528860860.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:21.336Z,1528860861.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:21.737Z,1528860861.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:22.140Z,1528860862.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:22.542Z,1528860862.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:22.944Z,1528860862.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:23.346Z,1528860863.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:23.737Z,1528860863.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:24.137Z,1528860864.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:24.540Z,1528860864.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:24.940Z,1528860864.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:25.341Z,1528860865.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:25.691Z,1528860865.691 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T03:34:25.691Z,1528860865.691 [NAL9602] Data Fault, FailCount= 1
2018-06-13T03:34:25.691Z,1528860865.691 [NAL9602](ERROR): Data Fault
2018-06-13T03:34:25.726Z,1528860865.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:25.825Z,1528860865.825 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T03:34:26.094Z,1528860866.094 [NAL9602](INFO): Powering down
2018-06-13T03:34:26.129Z,1528860866.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:26.532Z,1528860866.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:26.961Z,1528860866.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:27.048Z,1528860867.048 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T03:34:27.048Z,1528860867.048 [NAL9602] No Fault, FailCount= 1
2018-06-13T03:34:27.325Z,1528860867.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:27.726Z,1528860867.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:28.129Z,1528860868.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:28.526Z,1528860868.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:28.935Z,1528860868.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:29.327Z,1528860869.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:29.726Z,1528860869.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:30.127Z,1528860870.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:30.528Z,1528860870.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:30.927Z,1528860870.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:31.326Z,1528860871.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:31.728Z,1528860871.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:32.127Z,1528860872.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:32.526Z,1528860872.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:32.936Z,1528860872.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:33.325Z,1528860873.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:33.727Z,1528860873.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:34.131Z,1528860874.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:34.528Z,1528860874.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:34.928Z,1528860874.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:35.328Z,1528860875.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:35.728Z,1528860875.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:36.126Z,1528860876.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:36.528Z,1528860876.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:36.929Z,1528860876.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:37.330Z,1528860877.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:37.729Z,1528860877.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:38.128Z,1528860878.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:38.533Z,1528860878.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:38.964Z,1528860878.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:39.330Z,1528860879.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:39.739Z,1528860879.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:40.130Z,1528860880.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:40.527Z,1528860880.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:40.929Z,1528860880.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:41.330Z,1528860881.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:41.726Z,1528860881.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:42.129Z,1528860882.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:42.530Z,1528860882.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:42.926Z,1528860882.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:43.329Z,1528860883.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:43.730Z,1528860883.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:44.126Z,1528860884.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:44.534Z,1528860884.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:44.930Z,1528860884.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:45.330Z,1528860885.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:45.735Z,1528860885.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:46.131Z,1528860886.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:46.531Z,1528860886.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:46.929Z,1528860886.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:47.336Z,1528860887.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:47.730Z,1528860887.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:48.129Z,1528860888.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:48.531Z,1528860888.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:51.673Z,1528860891.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:51.824Z,1528860891.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:52.196Z,1528860892.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:52.621Z,1528860892.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:53.004Z,1528860893.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:53.401Z,1528860893.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:53.798Z,1528860893.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:54.200Z,1528860894.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:54.598Z,1528860894.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:54.999Z,1528860894.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:55.400Z,1528860895.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:55.801Z,1528860895.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:56.165Z,1528860896.165 [NAL9602](INFO): Powering up NAL9602
2018-06-13T03:34:56.229Z,1528860896.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:56.596Z,1528860896.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:57.000Z,1528860897.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:57.400Z,1528860897.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:57.804Z,1528860897.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:58.205Z,1528860898.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:58.600Z,1528860898.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:58.000Z,1528860899.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:59.405Z,1528860899.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:34:59.800Z,1528860899.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:00.204Z,1528860900.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:00.601Z,1528860900.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:00.996Z,1528860900.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:01.398Z,1528860901.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:01.801Z,1528860901.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:02.201Z,1528860902.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:02.604Z,1528860902.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:02.996Z,1528860902.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:03.396Z,1528860903.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:03.848Z,1528860903.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:04.235Z,1528860904.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:04.596Z,1528860904.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:05.000Z,1528860905.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:05.396Z,1528860905.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:05.798Z,1528860905.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:06.200Z,1528860906.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:06.598Z,1528860906.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:07.004Z,1528860907.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:07.365Z,1528860907.365 [NAL9602](INFO): NAL9602 initialized
2018-06-13T03:35:07.400Z,1528860907.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:07.799Z,1528860907.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:08.225Z,1528860908.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:08.632Z,1528860908.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:09.016Z,1528860909.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:09.399Z,1528860909.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:09.805Z,1528860909.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:10.204Z,1528860910.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:10.600Z,1528860910.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:11.016Z,1528860911.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:11.411Z,1528860911.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:11.816Z,1528860911.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:12.203Z,1528860912.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:12.603Z,1528860912.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:13.004Z,1528860913.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:13.403Z,1528860913.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:13.803Z,1528860913.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:14.205Z,1528860914.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:14.616Z,1528860914.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:15.009Z,1528860915.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:15.399Z,1528860915.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:15.803Z,1528860915.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:16.204Z,1528860916.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:16.606Z,1528860916.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:17.039Z,1528860917.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:17.411Z,1528860917.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:17.820Z,1528860917.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:18.204Z,1528860918.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:18.604Z,1528860918.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:19.004Z,1528860919.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:19.407Z,1528860919.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:19.800Z,1528860919.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:20.216Z,1528860920.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:20.612Z,1528860920.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:21.012Z,1528860921.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:21.407Z,1528860921.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:21.817Z,1528860921.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:22.205Z,1528860922.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:22.604Z,1528860922.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:23.018Z,1528860923.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:23.417Z,1528860923.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:23.820Z,1528860923.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:24.205Z,1528860924.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:24.604Z,1528860924.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:25.004Z,1528860925.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:25.406Z,1528860925.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:25.815Z,1528860925.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:26.217Z,1528860926.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:26.621Z,1528860926.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:27.024Z,1528860927.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:27.405Z,1528860927.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:27.805Z,1528860927.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:28.208Z,1528860928.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:28.603Z,1528860928.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:29.020Z,1528860929.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:29.418Z,1528860929.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:29.819Z,1528860929.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:30.224Z,1528860930.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:30.606Z,1528860930.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:31.005Z,1528860931.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:31.406Z,1528860931.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:31.808Z,1528860931.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:32.218Z,1528860932.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:32.617Z,1528860932.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:33.017Z,1528860933.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:33.405Z,1528860933.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:33.805Z,1528860933.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:34.212Z,1528860934.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:34.605Z,1528860934.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:35.020Z,1528860935.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:35.424Z,1528860935.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:35.820Z,1528860935.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:36.206Z,1528860936.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:36.606Z,1528860936.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:37.008Z,1528860937.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:37.405Z,1528860937.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:37.807Z,1528860937.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:38.218Z,1528860938.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:38.618Z,1528860938.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:39.022Z,1528860939.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:39.405Z,1528860939.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:39.812Z,1528860939.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:40.208Z,1528860940.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:40.606Z,1528860940.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:41.015Z,1528860941.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:41.423Z,1528860941.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:41.812Z,1528860941.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:42.206Z,1528860942.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:42.610Z,1528860942.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:43.014Z,1528860943.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:43.419Z,1528860943.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:43.816Z,1528860943.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:44.217Z,1528860944.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:44.624Z,1528860944.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:45.020Z,1528860945.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:45.415Z,1528860945.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:45.817Z,1528860945.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:46.211Z,1528860946.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:46.609Z,1528860946.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:47.020Z,1528860947.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:47.426Z,1528860947.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:47.832Z,1528860947.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:48.201Z,1528860948.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:48.602Z,1528860948.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:49.000Z,1528860949.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:49.405Z,1528860949.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:49.805Z,1528860949.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:52.945Z,1528860952.945 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:52.945Z,1528860952.945 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2018-06-13T03:35:52.945Z,1528860952.945 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T03:35:52.947Z,1528860952.947 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:52.947Z,1528860952.947 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-06-13T03:35:52.947Z,1528860952.947 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T03:35:52.949Z,1528860952.949 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:52.949Z,1528860952.949 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-06-13T03:35:52.949Z,1528860952.949 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T03:35:53.025Z,1528860953.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T03:35:53.025Z,1528860953.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T03:35:53.026Z,1528860953.026 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T03:35:53.221Z,1528860953.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T03:35:53.221Z,1528860953.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2018-06-13T03:35:53.221Z,1528860953.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T03:35:53.221Z,1528860953.221 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-06-13T03:35:53.222Z,1528860953.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T03:35:53.222Z,1528860953.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-06-13T03:35:53.498Z,1528860953.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T03:35:53.498Z,1528860953.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:35:53.499Z,1528860953.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:35:53.499Z,1528860953.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T03:35:53.499Z,1528860953.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:35:53.500Z,1528860953.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:35:53.500Z,1528860953.500 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T03:35:53.500Z,1528860953.500 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:35:53.501Z,1528860953.501 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:35:53.889Z,1528860953.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-06-13T03:35:53.890Z,1528860953.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:54.289Z,1528860954.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-06-13T03:35:54.290Z,1528860954.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:54.673Z,1528860954.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T03:35:54.674Z,1528860954.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:55.101Z,1528860955.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T03:35:55.102Z,1528860955.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:55.508Z,1528860955.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T03:35:55.509Z,1528860955.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:55.910Z,1528860955.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T03:35:55.910Z,1528860955.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:56.304Z,1528860956.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T03:35:56.305Z,1528860956.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:56.676Z,1528860956.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T03:35:56.677Z,1528860956.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:57.076Z,1528860957.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T03:35:57.077Z,1528860957.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:57.472Z,1528860957.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T03:35:57.474Z,1528860957.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:57.875Z,1528860957.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T03:35:57.876Z,1528860957.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:58.303Z,1528860958.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T03:35:58.304Z,1528860958.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:58.708Z,1528860958.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T03:35:58.713Z,1528860958.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:59.083Z,1528860959.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T03:35:59.084Z,1528860959.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:59.480Z,1528860959.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T03:35:59.481Z,1528860959.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:35:59.875Z,1528860959.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T03:35:59.876Z,1528860959.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:00.279Z,1528860960.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T03:36:00.280Z,1528860960.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:00.688Z,1528860960.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T03:36:00.689Z,1528860960.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:01.088Z,1528860961.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T03:36:01.089Z,1528860961.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:01.487Z,1528860961.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T03:36:01.488Z,1528860961.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:01.892Z,1528860961.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T03:36:01.893Z,1528860961.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:02.274Z,1528860962.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T03:36:02.275Z,1528860962.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:02.684Z,1528860962.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T03:36:02.689Z,1528860962.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:03.083Z,1528860963.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T03:36:03.084Z,1528860963.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:03.478Z,1528860963.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T03:36:03.479Z,1528860963.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:03.881Z,1528860963.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T03:36:03.882Z,1528860963.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:04.294Z,1528860964.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T03:36:04.295Z,1528860964.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:04.688Z,1528860964.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T03:36:04.690Z,1528860964.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:05.088Z,1528860965.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T03:36:05.089Z,1528860965.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:05.498Z,1528860965.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T03:36:05.499Z,1528860965.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:05.879Z,1528860965.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T03:36:05.880Z,1528860965.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:06.280Z,1528860966.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T03:36:06.281Z,1528860966.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:06.684Z,1528860966.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T03:36:06.685Z,1528860966.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:07.089Z,1528860967.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T03:36:07.090Z,1528860967.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:07.500Z,1528860967.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T03:36:07.501Z,1528860967.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:07.893Z,1528860967.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T03:36:07.894Z,1528860967.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:08.284Z,1528860968.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T03:36:08.285Z,1528860968.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:08.685Z,1528860968.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T03:36:08.686Z,1528860968.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:09.089Z,1528860969.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T03:36:09.090Z,1528860969.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:09.476Z,1528860969.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T03:36:09.477Z,1528860969.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:09.880Z,1528860969.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T03:36:09.881Z,1528860969.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:10.295Z,1528860970.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T03:36:10.295Z,1528860970.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:10.692Z,1528860970.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T03:36:10.694Z,1528860970.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:11.089Z,1528860971.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T03:36:11.090Z,1528860971.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:11.493Z,1528860971.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T03:36:11.494Z,1528860971.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:11.880Z,1528860971.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T03:36:11.885Z,1528860971.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:12.289Z,1528860972.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T03:36:12.290Z,1528860972.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:12.672Z,1528860972.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T03:36:12.689Z,1528860972.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:13.096Z,1528860973.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:13.496Z,1528860973.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:13.897Z,1528860973.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:14.268Z,1528860974.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:14.676Z,1528860974.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:15.092Z,1528860975.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:15.472Z,1528860975.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:15.878Z,1528860975.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:16.287Z,1528860976.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:16.683Z,1528860976.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:17.084Z,1528860977.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:17.484Z,1528860977.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:17.876Z,1528860977.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:18.280Z,1528860978.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:18.679Z,1528860978.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:19.084Z,1528860979.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:19.487Z,1528860979.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:19.887Z,1528860979.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:20.283Z,1528860980.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:20.678Z,1528860980.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:21.080Z,1528860981.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:21.482Z,1528860981.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:21.910Z,1528860981.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:22.287Z,1528860982.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:22.688Z,1528860982.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:23.088Z,1528860983.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:23.479Z,1528860983.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:23.877Z,1528860983.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:24.280Z,1528860984.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:24.681Z,1528860984.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:25.090Z,1528860985.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:25.488Z,1528860985.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:25.889Z,1528860985.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:26.286Z,1528860986.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:26.684Z,1528860986.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:27.085Z,1528860987.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:27.478Z,1528860987.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:27.889Z,1528860987.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:28.294Z,1528860988.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:28.705Z,1528860988.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:29.090Z,1528860989.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:29.494Z,1528860989.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:29.884Z,1528860989.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:30.283Z,1528860990.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:30.686Z,1528860990.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:31.087Z,1528860991.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:31.494Z,1528860991.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:31.900Z,1528860991.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:32.280Z,1528860992.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:32.680Z,1528860992.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:33.094Z,1528860993.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:33.490Z,1528860993.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:33.908Z,1528860993.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:34.312Z,1528860994.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:34.700Z,1528860994.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:35.091Z,1528860995.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:35.485Z,1528860995.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:35.876Z,1528860995.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:36.280Z,1528860996.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:36.676Z,1528860996.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:37.083Z,1528860997.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:37.507Z,1528860997.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:37.887Z,1528860997.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:38.279Z,1528860998.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:38.678Z,1528860998.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:39.080Z,1528860999.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:39.479Z,1528860999.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:39.883Z,1528860999.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:40.288Z,1528861000.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:40.683Z,1528861000.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:41.083Z,1528861001.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:41.480Z,1528861001.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:41.883Z,1528861001.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:42.280Z,1528861002.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:42.680Z,1528861002.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:43.087Z,1528861003.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:43.487Z,1528861003.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:43.888Z,1528861003.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:44.277Z,1528861004.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:44.678Z,1528861004.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:45.081Z,1528861005.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:45.484Z,1528861005.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:45.879Z,1528861005.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:46.308Z,1528861006.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:46.688Z,1528861006.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:47.111Z,1528861007.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:47.511Z,1528861007.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:47.879Z,1528861007.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:48.284Z,1528861008.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:48.680Z,1528861008.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:51.811Z,1528861011.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:51.960Z,1528861011.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:52.365Z,1528861012.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:52.762Z,1528861012.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:53.141Z,1528861013.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:53.540Z,1528861013.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:53.936Z,1528861013.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:54.367Z,1528861014.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:54.772Z,1528861014.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:55.148Z,1528861015.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:55.541Z,1528861015.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:55.952Z,1528861015.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:56.339Z,1528861016.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:56.741Z,1528861016.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:57.151Z,1528861017.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:57.547Z,1528861017.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:57.948Z,1528861017.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:58.348Z,1528861018.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:58.740Z,1528861018.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:59.143Z,1528861019.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:59.545Z,1528861019.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:36:59.950Z,1528861019.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:00.378Z,1528861020.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:00.755Z,1528861020.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:01.152Z,1528861021.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:01.542Z,1528861021.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:01.943Z,1528861021.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:02.340Z,1528861022.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:02.744Z,1528861022.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:03.155Z,1528861023.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:03.552Z,1528861023.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:03.952Z,1528861023.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:04.344Z,1528861024.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:04.741Z,1528861024.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:05.139Z,1528861025.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:05.544Z,1528861025.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:05.940Z,1528861025.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:06.352Z,1528861026.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:06.749Z,1528861026.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:07.152Z,1528861027.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:07.546Z,1528861027.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:07.944Z,1528861027.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:08.341Z,1528861028.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:08.743Z,1528861028.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:09.160Z,1528861029.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:09.553Z,1528861029.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:09.950Z,1528861029.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:10.352Z,1528861030.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:10.741Z,1528861030.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:11.143Z,1528861031.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:11.546Z,1528861031.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:11.949Z,1528861031.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:12.353Z,1528861032.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:12.755Z,1528861032.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:13.156Z,1528861033.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:13.546Z,1528861033.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:13.948Z,1528861033.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:14.354Z,1528861034.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:14.748Z,1528861034.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:15.155Z,1528861035.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:15.553Z,1528861035.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:15.953Z,1528861035.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:16.345Z,1528861036.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:16.744Z,1528861036.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:17.145Z,1528861037.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:17.543Z,1528861037.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:17.940Z,1528861037.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:18.354Z,1528861038.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:18.756Z,1528861038.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:19.149Z,1528861039.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:19.544Z,1528861039.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:19.943Z,1528861039.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:20.341Z,1528861040.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:20.743Z,1528861040.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:21.154Z,1528861041.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:21.552Z,1528861041.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:21.952Z,1528861041.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:22.343Z,1528861042.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:22.742Z,1528861042.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:23.147Z,1528861043.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:23.544Z,1528861043.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:23.953Z,1528861043.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:24.353Z,1528861044.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:24.756Z,1528861044.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:25.149Z,1528861045.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:25.544Z,1528861045.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:25.944Z,1528861045.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:26.342Z,1528861046.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:26.746Z,1528861046.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:27.156Z,1528861047.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:27.553Z,1528861047.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:27.956Z,1528861047.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:28.343Z,1528861048.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:28.747Z,1528861048.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:29.142Z,1528861049.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:29.544Z,1528861049.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:29.943Z,1528861049.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:30.360Z,1528861050.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:30.757Z,1528861050.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:31.153Z,1528861051.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:31.543Z,1528861051.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:31.942Z,1528861051.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:32.343Z,1528861052.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:32.762Z,1528861052.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:33.164Z,1528861053.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:33.564Z,1528861053.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:33.953Z,1528861053.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:34.346Z,1528861054.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:34.744Z,1528861054.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:35.144Z,1528861055.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:35.547Z,1528861055.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:35.951Z,1528861055.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:36.353Z,1528861056.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:36.764Z,1528861056.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:37.153Z,1528861057.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:37.545Z,1528861057.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:37.947Z,1528861057.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:38.352Z,1528861058.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:38.744Z,1528861058.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:39.157Z,1528861059.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:39.557Z,1528861059.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:39.953Z,1528861059.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:40.351Z,1528861060.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:40.744Z,1528861060.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:41.140Z,1528861061.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:41.552Z,1528861061.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:41.944Z,1528861061.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:42.354Z,1528861062.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:42.757Z,1528861062.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:43.157Z,1528861063.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:43.544Z,1528861063.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:43.946Z,1528861063.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:44.345Z,1528861064.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:44.743Z,1528861064.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:45.158Z,1528861065.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:45.556Z,1528861065.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:45.953Z,1528861065.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:46.346Z,1528861066.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:46.744Z,1528861066.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:47.152Z,1528861067.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:47.552Z,1528861067.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:47.952Z,1528861067.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:48.360Z,1528861068.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:48.363Z,1528861068.363 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T03:37:48.363Z,1528861068.363 [Default:CheckIn:C.Wait] Stopped
2018-06-13T03:37:48.363Z,1528861068.363 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T03:37:48.363Z,1528861068.363 [Default:CheckIn:D] Running Loop=1
2018-06-13T03:37:48.760Z,1528861068.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:48.764Z,1528861068.764 [Default:CheckIn:D] Stopped
2018-06-13T03:37:48.764Z,1528861068.764 [Default:CheckIn:E] Running Loop=1
2018-06-13T03:37:51.863Z,1528861071.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:51.867Z,1528861071.867 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.588629 min 
2018-06-13T03:37:51.869Z,1528861071.869 [Default:CheckIn:E] Stopped
2018-06-13T03:37:51.869Z,1528861071.869 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T03:37:51.869Z,1528861071.869 [Default:CheckIn] Stopped
2018-06-13T03:37:51.869Z,1528861071.869 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T03:37:51.869Z,1528861071.869 [Default:CheckIn](INFO): Running loop #2
2018-06-13T03:37:51.869Z,1528861071.869 [Default:CheckIn] Running Loop=2
2018-06-13T03:37:51.869Z,1528861071.869 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T03:37:51.870Z,1528861071.870 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T03:37:52.024Z,1528861072.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:52.421Z,1528861072.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:52.815Z,1528861072.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:53.220Z,1528861073.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:53.620Z,1528861073.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:54.024Z,1528861074.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:54.412Z,1528861074.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:54.811Z,1528861074.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:55.214Z,1528861075.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:55.617Z,1528861075.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:56.015Z,1528861076.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:56.428Z,1528861076.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:56.824Z,1528861076.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:57.229Z,1528861077.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:57.616Z,1528861077.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:58.013Z,1528861078.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:58.417Z,1528861078.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:58.809Z,1528861078.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:59.221Z,1528861079.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:37:59.627Z,1528861079.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:00.027Z,1528861080.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:00.420Z,1528861080.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:00.826Z,1528861080.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:01.222Z,1528861081.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:01.623Z,1528861081.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:02.026Z,1528861082.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:02.432Z,1528861082.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:02.832Z,1528861082.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:03.232Z,1528861083.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:03.622Z,1528861083.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:04.020Z,1528861084.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:04.422Z,1528861084.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:04.808Z,1528861084.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:05.235Z,1528861085.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:05.633Z,1528861085.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:06.035Z,1528861086.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:06.408Z,1528861086.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:06.810Z,1528861086.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:07.207Z,1528861087.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:07.608Z,1528861087.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:08.016Z,1528861088.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:08.419Z,1528861088.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:08.841Z,1528861088.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:09.219Z,1528861089.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:09.610Z,1528861089.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:10.010Z,1528861090.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:10.422Z,1528861090.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:10.811Z,1528861090.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:11.220Z,1528861091.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:11.621Z,1528861091.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:12.020Z,1528861092.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:12.413Z,1528861092.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:12.813Z,1528861092.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:13.215Z,1528861093.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:13.615Z,1528861093.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:14.016Z,1528861094.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:14.421Z,1528861094.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:14.824Z,1528861094.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:15.225Z,1528861095.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:15.610Z,1528861095.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:16.011Z,1528861096.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:16.417Z,1528861096.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:16.808Z,1528861096.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:17.220Z,1528861097.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:17.620Z,1528861097.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:18.017Z,1528861098.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:18.413Z,1528861098.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:18.811Z,1528861098.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:19.215Z,1528861099.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:19.612Z,1528861099.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:20.015Z,1528861100.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:20.424Z,1528861100.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:20.824Z,1528861100.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:21.221Z,1528861101.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:21.606Z,1528861101.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:22.012Z,1528861102.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:22.413Z,1528861102.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:22.808Z,1528861102.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:23.220Z,1528861103.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:23.620Z,1528861103.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:24.017Z,1528861104.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:24.412Z,1528861104.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:24.812Z,1528861104.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:25.210Z,1528861105.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:25.613Z,1528861105.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:26.015Z,1528861106.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:26.417Z,1528861106.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:26.824Z,1528861106.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:27.222Z,1528861107.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:27.608Z,1528861107.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:28.010Z,1528861108.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:28.412Z,1528861108.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:28.816Z,1528861108.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:29.221Z,1528861109.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:29.624Z,1528861109.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:30.019Z,1528861110.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:30.412Z,1528861110.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:30.816Z,1528861110.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:31.208Z,1528861111.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:31.611Z,1528861111.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:32.016Z,1528861112.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:32.417Z,1528861112.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:32.828Z,1528861112.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:33.225Z,1528861113.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:33.608Z,1528861113.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:34.010Z,1528861114.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:34.420Z,1528861114.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:34.816Z,1528861114.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:35.221Z,1528861115.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:35.629Z,1528861115.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:36.018Z,1528861116.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:36.412Z,1528861116.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:36.817Z,1528861116.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:37.219Z,1528861117.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:37.620Z,1528861117.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:38.016Z,1528861118.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:38.426Z,1528861118.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:38.826Z,1528861118.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:39.226Z,1528861119.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:39.619Z,1528861119.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:40.020Z,1528861120.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:40.422Z,1528861120.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:40.819Z,1528861120.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:41.221Z,1528861121.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:41.627Z,1528861121.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:42.018Z,1528861122.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:42.417Z,1528861122.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:42.826Z,1528861122.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:43.219Z,1528861123.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:43.619Z,1528861123.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:44.020Z,1528861124.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:44.422Z,1528861124.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:44.825Z,1528861124.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:45.226Z,1528861125.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:45.618Z,1528861125.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:46.018Z,1528861126.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:46.418Z,1528861126.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:46.818Z,1528861126.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:47.221Z,1528861127.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:47.629Z,1528861127.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:48.019Z,1528861128.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:48.424Z,1528861128.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:48.821Z,1528861128.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:51.940Z,1528861131.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:52.128Z,1528861132.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:52.520Z,1528861132.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:52.892Z,1528861132.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:53.291Z,1528861133.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:53.697Z,1528861133.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:53.697Z,1528861133.697 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2018-06-13T03:38:53.697Z,1528861133.697 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T03:38:53.699Z,1528861133.699 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:53.699Z,1528861133.699 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-06-13T03:38:53.699Z,1528861133.699 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T03:38:53.717Z,1528861133.717 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:53.717Z,1528861133.717 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-06-13T03:38:53.717Z,1528861133.717 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T03:38:53.798Z,1528861133.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T03:38:53.798Z,1528861133.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T03:38:53.798Z,1528861133.798 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T03:38:54.169Z,1528861134.169 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T03:38:54.169Z,1528861134.169 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2018-06-13T03:38:54.170Z,1528861134.170 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T03:38:54.170Z,1528861134.170 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-06-13T03:38:54.170Z,1528861134.170 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T03:38:54.170Z,1528861134.170 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-06-13T03:38:54.498Z,1528861134.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T03:38:54.499Z,1528861134.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:38:54.499Z,1528861134.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:38:54.499Z,1528861134.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T03:38:54.500Z,1528861134.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:38:54.500Z,1528861134.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:38:54.500Z,1528861134.500 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T03:38:54.501Z,1528861134.501 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:38:54.501Z,1528861134.501 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:38:54.905Z,1528861134.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T03:38:54.906Z,1528861134.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:55.304Z,1528861135.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T03:38:55.305Z,1528861135.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:55.694Z,1528861135.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T03:38:55.695Z,1528861135.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:56.101Z,1528861136.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T03:38:56.102Z,1528861136.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:56.504Z,1528861136.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T03:38:56.509Z,1528861136.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:56.896Z,1528861136.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T03:38:56.899Z,1528861136.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:57.322Z,1528861137.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T03:38:57.323Z,1528861137.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:57.716Z,1528861137.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T03:38:57.717Z,1528861137.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:58.111Z,1528861138.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T03:38:58.112Z,1528861138.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:58.510Z,1528861138.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T03:38:58.511Z,1528861138.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:58.902Z,1528861138.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T03:38:58.903Z,1528861138.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:59.304Z,1528861139.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T03:38:59.305Z,1528861139.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:38:59.708Z,1528861139.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T03:38:59.709Z,1528861139.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:00.102Z,1528861140.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T03:39:00.103Z,1528861140.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:00.506Z,1528861140.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T03:39:00.507Z,1528861140.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:00.906Z,1528861140.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T03:39:00.907Z,1528861140.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:01.306Z,1528861141.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T03:39:01.307Z,1528861141.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:01.704Z,1528861141.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T03:39:01.705Z,1528861141.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:02.108Z,1528861142.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T03:39:02.113Z,1528861142.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:02.502Z,1528861142.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T03:39:02.503Z,1528861142.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:02.902Z,1528861142.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T03:39:02.903Z,1528861142.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:03.316Z,1528861143.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T03:39:03.317Z,1528861143.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:03.706Z,1528861143.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T03:39:03.707Z,1528861143.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:04.105Z,1528861144.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T03:39:04.106Z,1528861144.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:04.502Z,1528861144.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T03:39:04.502Z,1528861144.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:04.908Z,1528861144.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T03:39:04.909Z,1528861144.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:05.307Z,1528861145.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T03:39:05.308Z,1528861145.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:05.709Z,1528861145.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T03:39:05.710Z,1528861145.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:06.084Z,1528861146.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T03:39:06.097Z,1528861146.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:06.507Z,1528861146.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T03:39:06.508Z,1528861146.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:06.920Z,1528861146.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T03:39:06.921Z,1528861146.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:07.311Z,1528861147.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T03:39:07.312Z,1528861147.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:07.688Z,1528861147.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T03:39:07.705Z,1528861147.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:08.090Z,1528861148.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T03:39:08.091Z,1528861148.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:08.496Z,1528861148.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T03:39:08.521Z,1528861148.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:08.891Z,1528861148.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T03:39:08.892Z,1528861148.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:09.323Z,1528861149.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T03:39:09.324Z,1528861149.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:09.718Z,1528861149.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T03:39:09.719Z,1528861149.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:10.103Z,1528861150.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T03:39:10.104Z,1528861150.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:10.494Z,1528861150.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T03:39:10.495Z,1528861150.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:10.891Z,1528861150.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T03:39:10.892Z,1528861150.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:11.292Z,1528861151.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T03:39:11.294Z,1528861151.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:11.695Z,1528861151.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T03:39:11.696Z,1528861151.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:12.092Z,1528861152.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T03:39:12.093Z,1528861152.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:12.499Z,1528861152.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T03:39:12.500Z,1528861152.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:12.903Z,1528861152.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T03:39:12.904Z,1528861152.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:13.300Z,1528861153.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T03:39:13.300Z,1528861153.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:13.692Z,1528861153.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T03:39:13.694Z,1528861153.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:14.095Z,1528861154.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:14.491Z,1528861154.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:14.895Z,1528861154.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:15.303Z,1528861155.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:15.699Z,1528861155.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:16.099Z,1528861156.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:16.495Z,1528861156.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:16.892Z,1528861156.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:17.293Z,1528861157.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:17.706Z,1528861157.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:18.092Z,1528861158.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:18.504Z,1528861158.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:18.904Z,1528861158.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:19.299Z,1528861159.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:19.695Z,1528861159.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:20.095Z,1528861160.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:20.493Z,1528861160.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:20.894Z,1528861160.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:21.303Z,1528861161.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:21.704Z,1528861161.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:22.104Z,1528861162.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:22.496Z,1528861162.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:22.891Z,1528861162.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:23.295Z,1528861163.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:23.698Z,1528861163.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:24.092Z,1528861164.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:24.508Z,1528861164.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:24.903Z,1528861164.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:25.303Z,1528861165.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:25.695Z,1528861165.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:26.096Z,1528861166.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:26.500Z,1528861166.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:26.900Z,1528861166.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:27.303Z,1528861167.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:27.699Z,1528861167.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:28.108Z,1528861168.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:28.497Z,1528861168.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:28.892Z,1528861168.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:29.296Z,1528861169.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:29.696Z,1528861169.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:30.095Z,1528861170.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:30.506Z,1528861170.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:30.903Z,1528861170.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:31.300Z,1528861171.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:31.694Z,1528861171.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:32.095Z,1528861172.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:32.492Z,1528861172.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:32.895Z,1528861172.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:33.300Z,1528861173.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:33.704Z,1528861173.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:34.099Z,1528861174.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:34.496Z,1528861174.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:34.892Z,1528861174.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:35.296Z,1528861175.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:35.696Z,1528861175.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:36.107Z,1528861176.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:36.504Z,1528861176.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:36.902Z,1528861176.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:37.300Z,1528861177.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:37.696Z,1528861177.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:38.096Z,1528861178.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:38.497Z,1528861178.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:38.896Z,1528861178.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:39.303Z,1528861179.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:39.703Z,1528861179.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:40.108Z,1528861180.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:40.495Z,1528861180.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:40.896Z,1528861180.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:41.296Z,1528861181.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:41.696Z,1528861181.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:42.095Z,1528861182.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:42.504Z,1528861182.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:42.905Z,1528861182.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:43.308Z,1528861183.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:43.696Z,1528861183.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:44.095Z,1528861184.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:44.495Z,1528861184.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:44.897Z,1528861184.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:45.308Z,1528861185.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:45.708Z,1528861185.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:46.103Z,1528861186.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:46.495Z,1528861186.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:46.895Z,1528861186.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:47.303Z,1528861187.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:47.706Z,1528861187.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:48.108Z,1528861188.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:48.499Z,1528861188.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:48.899Z,1528861188.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:52.032Z,1528861192.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:52.212Z,1528861192.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:52.590Z,1528861192.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:52.984Z,1528861192.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:53.385Z,1528861193.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:53.790Z,1528861193.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:54.184Z,1528861194.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:54.587Z,1528861194.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:54.994Z,1528861194.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:55.391Z,1528861195.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:55.788Z,1528861195.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:56.164Z,1528861196.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:56.592Z,1528861196.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:56.984Z,1528861196.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:57.398Z,1528861197.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:57.796Z,1528861197.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:58.201Z,1528861198.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:58.576Z,1528861198.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:58.972Z,1528861198.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:59.371Z,1528861199.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:39:59.802Z,1528861199.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:00.171Z,1528861200.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:00.599Z,1528861200.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:01.010Z,1528861201.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:01.383Z,1528861201.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:01.774Z,1528861201.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:02.175Z,1528861202.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:02.575Z,1528861202.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:02.974Z,1528861202.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:03.383Z,1528861203.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:03.783Z,1528861203.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:04.179Z,1528861204.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:04.576Z,1528861204.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:04.972Z,1528861204.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:05.374Z,1528861205.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:05.777Z,1528861205.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:06.180Z,1528861206.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:06.580Z,1528861206.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:06.983Z,1528861206.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:07.383Z,1528861207.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:07.780Z,1528861207.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:08.176Z,1528861208.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:08.574Z,1528861208.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:08.974Z,1528861208.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:09.383Z,1528861209.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:09.783Z,1528861209.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:10.179Z,1528861210.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:10.580Z,1528861210.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:10.971Z,1528861210.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:11.374Z,1528861211.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:11.780Z,1528861211.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:12.171Z,1528861212.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:12.579Z,1528861212.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:12.983Z,1528861212.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:13.380Z,1528861213.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:13.780Z,1528861213.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:14.180Z,1528861214.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:14.575Z,1528861214.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:14.974Z,1528861214.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:15.384Z,1528861215.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:15.788Z,1528861215.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:16.180Z,1528861216.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:16.575Z,1528861216.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:16.972Z,1528861216.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:17.375Z,1528861217.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:17.782Z,1528861217.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:18.175Z,1528861218.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:18.583Z,1528861218.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:18.992Z,1528861218.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:19.381Z,1528861219.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:19.776Z,1528861219.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:20.175Z,1528861220.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:20.575Z,1528861220.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:20.977Z,1528861220.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:21.384Z,1528861221.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:21.785Z,1528861221.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:22.183Z,1528861222.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:22.576Z,1528861222.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:22.974Z,1528861222.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:23.376Z,1528861223.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:23.780Z,1528861223.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:24.173Z,1528861224.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:24.588Z,1528861224.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:24.986Z,1528861224.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:25.388Z,1528861225.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:25.777Z,1528861225.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:26.180Z,1528861226.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:26.580Z,1528861226.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:26.977Z,1528861226.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:27.397Z,1528861227.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:27.790Z,1528861227.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:28.185Z,1528861228.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:28.586Z,1528861228.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:28.976Z,1528861228.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:29.386Z,1528861229.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:29.790Z,1528861229.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:30.164Z,1528861230.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:30.596Z,1528861230.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:30.994Z,1528861230.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:31.386Z,1528861231.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:31.788Z,1528861231.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:32.169Z,1528861232.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:32.576Z,1528861232.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:32.971Z,1528861232.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:33.400Z,1528861233.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:33.783Z,1528861233.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:34.179Z,1528861234.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:34.576Z,1528861234.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:34.973Z,1528861234.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:35.379Z,1528861235.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:35.783Z,1528861235.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:36.179Z,1528861236.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:36.579Z,1528861236.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:36.975Z,1528861236.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:37.379Z,1528861237.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:37.783Z,1528861237.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:38.188Z,1528861238.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:38.575Z,1528861238.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:38.974Z,1528861238.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:39.384Z,1528861239.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:39.784Z,1528861239.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:40.184Z,1528861240.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:40.575Z,1528861240.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:40.974Z,1528861240.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:41.381Z,1528861241.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:41.788Z,1528861241.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:42.184Z,1528861242.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:42.576Z,1528861242.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:42.989Z,1528861242.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:43.384Z,1528861243.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:43.788Z,1528861243.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:44.185Z,1528861244.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:44.575Z,1528861244.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:44.974Z,1528861244.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:45.392Z,1528861245.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:45.788Z,1528861245.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:46.184Z,1528861246.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:46.584Z,1528861246.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:46.976Z,1528861246.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:47.383Z,1528861247.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:47.784Z,1528861247.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:48.181Z,1528861248.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:48.579Z,1528861248.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:48.981Z,1528861248.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:52.095Z,1528861252.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:52.288Z,1528861252.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:52.676Z,1528861252.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:53.069Z,1528861253.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:53.444Z,1528861253.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:53.870Z,1528861253.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:54.246Z,1528861254.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:54.665Z,1528861254.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:55.076Z,1528861255.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:55.465Z,1528861255.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:55.848Z,1528861255.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:56.248Z,1528861256.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:56.648Z,1528861256.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:57.044Z,1528861257.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:57.475Z,1528861257.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:57.869Z,1528861257.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:58.271Z,1528861258.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:58.672Z,1528861258.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:59.050Z,1528861259.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:59.449Z,1528861259.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:40:59.850Z,1528861259.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:00.245Z,1528861260.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:00.675Z,1528861260.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:01.060Z,1528861261.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:01.456Z,1528861261.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:01.848Z,1528861261.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:02.252Z,1528861262.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:02.647Z,1528861262.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:03.050Z,1528861263.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:03.459Z,1528861263.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:03.860Z,1528861263.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:04.255Z,1528861264.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:04.651Z,1528861264.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:05.047Z,1528861265.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:05.450Z,1528861265.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:05.857Z,1528861265.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:06.245Z,1528861266.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:06.659Z,1528861266.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:07.063Z,1528861267.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:07.460Z,1528861267.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:07.851Z,1528861267.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:08.253Z,1528861268.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:08.648Z,1528861268.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:09.054Z,1528861269.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:09.459Z,1528861269.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:09.856Z,1528861269.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:10.256Z,1528861270.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:10.654Z,1528861270.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:11.048Z,1528861271.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:11.452Z,1528861271.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:11.854Z,1528861271.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:12.247Z,1528861272.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:12.664Z,1528861272.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:13.064Z,1528861273.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:13.457Z,1528861273.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:13.851Z,1528861273.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:14.262Z,1528861274.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:14.648Z,1528861274.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:15.051Z,1528861275.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:15.484Z,1528861275.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:15.859Z,1528861275.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:16.260Z,1528861276.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:16.652Z,1528861276.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:17.047Z,1528861277.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:17.446Z,1528861277.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:17.853Z,1528861277.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:18.248Z,1528861278.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:18.660Z,1528861278.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:19.059Z,1528861279.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:19.456Z,1528861279.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:19.851Z,1528861279.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:20.260Z,1528861280.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:20.648Z,1528861280.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:21.056Z,1528861281.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:21.459Z,1528861281.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:21.860Z,1528861281.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:22.257Z,1528861282.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:22.653Z,1528861282.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:23.047Z,1528861283.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:23.454Z,1528861283.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:23.853Z,1528861283.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:24.246Z,1528861284.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:24.660Z,1528861284.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:25.067Z,1528861285.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:25.460Z,1528861285.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:25.856Z,1528861285.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:26.251Z,1528861286.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:26.648Z,1528861286.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:27.047Z,1528861287.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:27.459Z,1528861287.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:27.860Z,1528861287.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:28.260Z,1528861288.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:28.654Z,1528861288.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:29.047Z,1528861289.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:29.460Z,1528861289.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:29.858Z,1528861289.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:30.260Z,1528861290.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:30.660Z,1528861290.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:31.060Z,1528861291.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:31.457Z,1528861291.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:31.868Z,1528861291.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:32.261Z,1528861292.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:32.652Z,1528861292.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:33.051Z,1528861293.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:33.461Z,1528861293.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:33.865Z,1528861293.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:34.264Z,1528861294.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:34.654Z,1528861294.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:35.047Z,1528861295.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:35.461Z,1528861295.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:35.861Z,1528861295.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:36.260Z,1528861296.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:36.653Z,1528861296.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:37.059Z,1528861297.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:37.460Z,1528861297.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:37.866Z,1528861297.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:38.272Z,1528861298.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:38.654Z,1528861298.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:39.054Z,1528861299.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:39.468Z,1528861299.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:39.862Z,1528861299.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:40.263Z,1528861300.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:40.657Z,1528861300.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:41.053Z,1528861301.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:41.468Z,1528861301.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:41.866Z,1528861301.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:42.262Z,1528861302.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:42.653Z,1528861302.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:43.054Z,1528861303.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:43.462Z,1528861303.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:43.863Z,1528861303.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:44.262Z,1528861304.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:44.653Z,1528861304.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:45.052Z,1528861305.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:45.466Z,1528861305.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:45.861Z,1528861305.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:46.268Z,1528861306.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:46.655Z,1528861306.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:47.056Z,1528861307.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:47.461Z,1528861307.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:47.861Z,1528861307.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:48.267Z,1528861308.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:48.660Z,1528861308.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:49.056Z,1528861309.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:49.462Z,1528861309.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:49.872Z,1528861309.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:50.267Z,1528861310.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:53.360Z,1528861313.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:53.516Z,1528861313.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:53.907Z,1528861313.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:54.307Z,1528861314.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:54.708Z,1528861314.708 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:54.708Z,1528861314.708 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2018-06-13T03:41:54.708Z,1528861314.708 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T03:41:54.710Z,1528861314.710 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:54.710Z,1528861314.710 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-06-13T03:41:54.710Z,1528861314.710 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T03:41:54.712Z,1528861314.712 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:54.712Z,1528861314.712 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-06-13T03:41:54.712Z,1528861314.712 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T03:41:54.790Z,1528861314.790 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T03:41:54.790Z,1528861314.790 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T03:41:54.790Z,1528861314.790 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T03:41:55.193Z,1528861315.193 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T03:41:55.193Z,1528861315.193 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2018-06-13T03:41:55.193Z,1528861315.193 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T03:41:55.193Z,1528861315.193 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-06-13T03:41:55.194Z,1528861315.194 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T03:41:55.194Z,1528861315.194 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-06-13T03:41:55.485Z,1528861315.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T03:41:55.486Z,1528861315.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:41:55.486Z,1528861315.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:41:55.486Z,1528861315.486 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T03:41:55.487Z,1528861315.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:41:55.487Z,1528861315.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:41:55.487Z,1528861315.487 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T03:41:55.488Z,1528861315.488 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:41:55.488Z,1528861315.488 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:41:55.899Z,1528861315.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T03:41:55.900Z,1528861315.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:56.289Z,1528861316.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T03:41:56.290Z,1528861316.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:56.695Z,1528861316.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T03:41:56.696Z,1528861316.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:57.099Z,1528861317.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T03:41:57.100Z,1528861317.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:57.498Z,1528861317.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T03:41:57.499Z,1528861317.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:57.890Z,1528861317.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T03:41:57.891Z,1528861317.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:58.288Z,1528861318.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T03:41:58.290Z,1528861318.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:58.690Z,1528861318.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T03:41:58.691Z,1528861318.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:59.090Z,1528861319.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T03:41:59.091Z,1528861319.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:59.495Z,1528861319.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T03:41:59.496Z,1528861319.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:41:59.898Z,1528861319.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T03:41:59.899Z,1528861319.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:00.287Z,1528861320.287 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T03:42:00.287Z,1528861320.287 [BPC1] Communications Fault, FailCount= 2
2018-06-13T03:42:00.287Z,1528861320.287 [BPC1](ERROR): Communications Fault
2018-06-13T03:42:00.296Z,1528861320.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T03:42:00.297Z,1528861320.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:00.401Z,1528861320.401 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T03:42:00.690Z,1528861320.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T03:42:00.691Z,1528861320.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:01.090Z,1528861321.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T03:42:01.091Z,1528861321.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:01.495Z,1528861321.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T03:42:01.496Z,1528861321.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:01.581Z,1528861321.581 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T03:42:01.581Z,1528861321.581 [BPC1] No Fault, FailCount= 2
2018-06-13T03:42:01.960Z,1528861321.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T03:42:01.975Z,1528861321.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:02.299Z,1528861322.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T03:42:02.300Z,1528861322.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:02.690Z,1528861322.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T03:42:02.691Z,1528861322.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:03.091Z,1528861323.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T03:42:03.092Z,1528861323.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:03.503Z,1528861323.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T03:42:03.504Z,1528861323.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:03.904Z,1528861323.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T03:42:03.905Z,1528861323.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:04.299Z,1528861324.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T03:42:04.300Z,1528861324.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:04.691Z,1528861324.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T03:42:04.692Z,1528861324.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:05.096Z,1528861325.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T03:42:05.097Z,1528861325.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:05.499Z,1528861325.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T03:42:05.500Z,1528861325.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:05.907Z,1528861325.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T03:42:05.908Z,1528861325.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:06.304Z,1528861326.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T03:42:06.305Z,1528861326.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:06.692Z,1528861326.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T03:42:06.693Z,1528861326.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:07.094Z,1528861327.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T03:42:07.095Z,1528861327.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:07.504Z,1528861327.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T03:42:07.505Z,1528861327.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:07.904Z,1528861327.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T03:42:07.906Z,1528861327.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:08.308Z,1528861328.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T03:42:08.325Z,1528861328.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:08.692Z,1528861328.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T03:42:08.693Z,1528861328.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:09.091Z,1528861329.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T03:42:09.092Z,1528861329.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:09.500Z,1528861329.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T03:42:09.501Z,1528861329.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:09.904Z,1528861329.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T03:42:09.905Z,1528861329.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:10.299Z,1528861330.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T03:42:10.300Z,1528861330.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:10.692Z,1528861330.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T03:42:10.693Z,1528861330.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:11.090Z,1528861331.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T03:42:11.091Z,1528861331.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:11.500Z,1528861331.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T03:42:11.500Z,1528861331.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:11.903Z,1528861331.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T03:42:11.904Z,1528861331.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:12.304Z,1528861332.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T03:42:12.305Z,1528861332.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:12.692Z,1528861332.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T03:42:12.694Z,1528861332.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:13.093Z,1528861333.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T03:42:13.094Z,1528861333.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:13.504Z,1528861333.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T03:42:13.505Z,1528861333.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:13.904Z,1528861333.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T03:42:13.905Z,1528861333.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:14.303Z,1528861334.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T03:42:14.304Z,1528861334.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:14.696Z,1528861334.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T03:42:14.697Z,1528861334.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:15.091Z,1528861335.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:15.501Z,1528861335.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:15.904Z,1528861335.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:16.304Z,1528861336.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:16.695Z,1528861336.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:17.096Z,1528861337.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:17.500Z,1528861337.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:17.908Z,1528861337.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:18.308Z,1528861338.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:18.691Z,1528861338.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:19.096Z,1528861339.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:19.510Z,1528861339.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:19.904Z,1528861339.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:20.306Z,1528861340.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:20.692Z,1528861340.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:21.092Z,1528861341.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:21.512Z,1528861341.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:21.902Z,1528861341.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:22.308Z,1528861342.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:22.699Z,1528861342.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:23.097Z,1528861343.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:23.508Z,1528861343.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:23.906Z,1528861343.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:24.302Z,1528861344.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:24.692Z,1528861344.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:25.096Z,1528861345.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:25.501Z,1528861345.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:25.904Z,1528861345.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:26.304Z,1528861346.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:26.693Z,1528861346.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:27.092Z,1528861347.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:27.505Z,1528861347.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:27.902Z,1528861347.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:28.300Z,1528861348.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:28.704Z,1528861348.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:29.093Z,1528861349.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:29.492Z,1528861349.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:29.912Z,1528861349.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:30.301Z,1528861350.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:30.701Z,1528861350.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:31.097Z,1528861351.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:31.492Z,1528861351.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:31.894Z,1528861351.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:32.295Z,1528861352.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:32.705Z,1528861352.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:33.109Z,1528861353.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:33.507Z,1528861353.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:33.898Z,1528861353.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:34.292Z,1528861354.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:34.704Z,1528861354.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:35.100Z,1528861355.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:35.500Z,1528861355.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:35.907Z,1528861355.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:36.300Z,1528861356.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:36.702Z,1528861356.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:37.096Z,1528861357.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:37.496Z,1528861357.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:37.892Z,1528861357.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:38.295Z,1528861358.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:38.702Z,1528861358.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:39.104Z,1528861359.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:39.519Z,1528861359.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:39.898Z,1528861359.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:40.292Z,1528861360.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:40.695Z,1528861360.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:41.098Z,1528861361.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:41.492Z,1528861361.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:41.906Z,1528861361.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:42.305Z,1528861362.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:42.701Z,1528861362.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:43.096Z,1528861363.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:43.497Z,1528861363.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:43.892Z,1528861363.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:44.301Z,1528861364.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:44.697Z,1528861364.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:45.104Z,1528861365.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:45.513Z,1528861365.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:45.892Z,1528861365.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:46.293Z,1528861366.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:46.695Z,1528861366.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:47.098Z,1528861367.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:47.492Z,1528861367.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:47.906Z,1528861367.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:48.312Z,1528861368.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:48.700Z,1528861368.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:49.100Z,1528861369.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:49.499Z,1528861369.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:49.892Z,1528861369.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:50.305Z,1528861370.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:53.410Z,1528861373.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:53.413Z,1528861373.413 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T03:37:51.9Z
2018-06-13T03:42:53.413Z,1528861373.413 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T03:42:53.413Z,1528861373.413 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T03:42:53.576Z,1528861373.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:54.704Z,1528861374.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:54.850Z,1528861374.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:55.250Z,1528861375.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:55.652Z,1528861375.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:56.050Z,1528861376.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:56.450Z,1528861376.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:42:56.857Z,1528861376.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:00.000Z,1528861380.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:00.098Z,1528861380.098 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0008.lzma
2018-06-13T03:43:00.198Z,1528861380.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:00.556Z,1528861380.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:00.897Z,1528861380.897 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0008.lzma.bak
2018-06-13T03:43:00.898Z,1528861380.898 [DataOverHttps](INFO): SBD MOMSN=8328504
2018-06-13T03:43:00.963Z,1528861380.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:02.830Z,1528861382.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:03.055Z,1528861383.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:06.168Z,1528861386.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:06.316Z,1528861386.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:06.705Z,1528861386.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:07.109Z,1528861387.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:07.504Z,1528861387.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:07.913Z,1528861387.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:08.314Z,1528861388.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:08.709Z,1528861388.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:09.104Z,1528861389.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:09.509Z,1528861389.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:09.905Z,1528861389.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:10.306Z,1528861390.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:10.724Z,1528861390.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:11.117Z,1528861391.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:14.317Z,1528861394.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:14.406Z,1528861394.406 [DataOverHttps](INFO): Sending 171 bytes from file Logs/20180613T032335/Express0009.lzma
2018-06-13T03:43:14.476Z,1528861394.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:14.859Z,1528861394.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:15.201Z,1528861395.201 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0009.lzma.bak
2018-06-13T03:43:15.202Z,1528861395.202 [DataOverHttps](INFO): SBD MOMSN=8328508
2018-06-13T03:43:15.273Z,1528861395.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:17.158Z,1528861397.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:17.160Z,1528861397.160 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T03:43:17.161Z,1528861397.161 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T03:43:17.161Z,1528861397.161 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T03:43:17.311Z,1528861397.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:17.714Z,1528861397.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:20.824Z,1528861400.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:21.004Z,1528861401.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:21.411Z,1528861401.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:21.807Z,1528861401.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:22.204Z,1528861402.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:22.601Z,1528861402.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:22.985Z,1528861402.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:23.400Z,1528861403.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:23.815Z,1528861403.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:24.214Z,1528861404.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:24.616Z,1528861404.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:24.989Z,1528861404.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:25.385Z,1528861405.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:25.789Z,1528861405.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:26.192Z,1528861406.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:26.591Z,1528861406.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:26.995Z,1528861406.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:27.417Z,1528861407.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:27.790Z,1528861407.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:28.191Z,1528861408.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:28.600Z,1528861408.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:28.995Z,1528861408.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:29.399Z,1528861409.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:29.793Z,1528861409.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:30.199Z,1528861410.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:30.596Z,1528861410.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:31.000Z,1528861411.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:31.396Z,1528861411.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:31.795Z,1528861411.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:32.192Z,1528861412.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:32.596Z,1528861412.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:33.000Z,1528861413.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:33.400Z,1528861413.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:33.791Z,1528861413.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:34.198Z,1528861414.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:34.599Z,1528861414.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:35.012Z,1528861415.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:35.404Z,1528861415.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:35.802Z,1528861415.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:36.198Z,1528861416.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:36.598Z,1528861416.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:36.000Z,1528861417.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:37.392Z,1528861417.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:37.803Z,1528861417.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:38.205Z,1528861418.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:38.605Z,1528861418.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:39.005Z,1528861419.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:39.411Z,1528861419.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:39.781Z,1528861419.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:40.202Z,1528861420.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:40.585Z,1528861420.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:41.007Z,1528861421.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:41.414Z,1528861421.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:41.839Z,1528861421.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:42.204Z,1528861422.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:42.596Z,1528861422.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:42.992Z,1528861422.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:43.391Z,1528861423.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:43.797Z,1528861423.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:44.201Z,1528861424.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:44.601Z,1528861424.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:44.991Z,1528861424.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:45.391Z,1528861425.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:45.791Z,1528861425.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:46.192Z,1528861426.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:46.594Z,1528861426.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:46.000Z,1528861427.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:47.399Z,1528861427.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:47.804Z,1528861427.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:48.191Z,1528861428.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:48.592Z,1528861428.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:48.992Z,1528861428.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:49.391Z,1528861429.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:49.802Z,1528861429.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:50.204Z,1528861430.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:50.605Z,1528861430.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:50.990Z,1528861430.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:51.424Z,1528861431.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:51.792Z,1528861431.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:52.193Z,1528861432.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:52.600Z,1528861432.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:53.002Z,1528861433.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:53.407Z,1528861433.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:53.812Z,1528861433.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:54.200Z,1528861434.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:54.588Z,1528861434.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:54.994Z,1528861434.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:55.393Z,1528861435.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:55.802Z,1528861435.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:56.205Z,1528861436.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:56.660Z,1528861436.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:56.988Z,1528861436.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:57.406Z,1528861437.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:57.816Z,1528861437.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:58.301Z,1528861438.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:58.601Z,1528861438.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:59.003Z,1528861439.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:59.406Z,1528861439.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:43:59.806Z,1528861439.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:00.204Z,1528861440.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:00.602Z,1528861440.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:00.993Z,1528861440.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:01.397Z,1528861441.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:01.811Z,1528861441.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:02.210Z,1528861442.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:02.611Z,1528861442.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:03.030Z,1528861443.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:03.384Z,1528861443.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:03.784Z,1528861443.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:04.185Z,1528861444.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:04.588Z,1528861444.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:05.014Z,1528861445.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:05.413Z,1528861445.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:05.809Z,1528861445.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:06.188Z,1528861446.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:06.587Z,1528861446.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:06.989Z,1528861446.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:07.384Z,1528861447.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:07.815Z,1528861447.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:08.257Z,1528861448.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:08.614Z,1528861448.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:08.988Z,1528861448.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:09.388Z,1528861449.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:09.788Z,1528861449.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:10.188Z,1528861450.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:10.588Z,1528861450.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:11.016Z,1528861451.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:11.418Z,1528861451.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:11.820Z,1528861451.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:12.188Z,1528861452.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:12.592Z,1528861452.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:12.989Z,1528861452.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:13.386Z,1528861453.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:13.816Z,1528861453.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:14.199Z,1528861454.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:14.592Z,1528861454.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:14.990Z,1528861454.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:15.391Z,1528861455.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:15.790Z,1528861455.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:16.192Z,1528861456.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:16.593Z,1528861456.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:16.000Z,1528861457.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:17.403Z,1528861457.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:17.804Z,1528861457.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:20.900Z,1528861460.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:21.083Z,1528861461.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:21.480Z,1528861461.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:21.882Z,1528861461.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:22.282Z,1528861462.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:22.658Z,1528861462.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:23.057Z,1528861463.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:23.456Z,1528861463.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:23.884Z,1528861463.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:24.280Z,1528861464.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:24.681Z,1528861464.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:25.080Z,1528861465.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:25.464Z,1528861465.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:25.856Z,1528861465.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:26.257Z,1528861466.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:26.653Z,1528861466.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:27.083Z,1528861467.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:27.487Z,1528861467.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:27.863Z,1528861467.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:28.258Z,1528861468.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:28.660Z,1528861468.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:29.057Z,1528861469.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:29.461Z,1528861469.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:29.869Z,1528861469.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:30.269Z,1528861470.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:30.672Z,1528861470.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:31.061Z,1528861471.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:31.457Z,1528861471.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:31.864Z,1528861471.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:32.273Z,1528861472.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:32.657Z,1528861472.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:33.068Z,1528861473.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:33.470Z,1528861473.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:33.865Z,1528861473.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:34.258Z,1528861474.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:34.668Z,1528861474.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:35.058Z,1528861475.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:35.460Z,1528861475.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:35.872Z,1528861475.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:36.280Z,1528861476.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:36.676Z,1528861476.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:37.074Z,1528861477.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:37.460Z,1528861477.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:37.860Z,1528861477.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:38.265Z,1528861478.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:38.660Z,1528861478.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:39.080Z,1528861479.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:39.474Z,1528861479.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:39.866Z,1528861479.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:40.268Z,1528861480.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:40.664Z,1528861480.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:41.063Z,1528861481.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:41.460Z,1528861481.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:41.875Z,1528861481.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:42.269Z,1528861482.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:42.669Z,1528861482.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:43.062Z,1528861483.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:43.466Z,1528861483.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:43.865Z,1528861483.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:44.270Z,1528861484.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:44.673Z,1528861484.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:45.077Z,1528861485.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:45.484Z,1528861485.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:45.887Z,1528861485.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:46.252Z,1528861486.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:46.669Z,1528861486.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:47.049Z,1528861487.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:47.452Z,1528861487.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:47.879Z,1528861487.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:48.275Z,1528861488.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:48.678Z,1528861488.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:49.053Z,1528861489.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:49.460Z,1528861489.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:49.860Z,1528861489.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:50.258Z,1528861490.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:50.653Z,1528861490.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:51.084Z,1528861491.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:51.487Z,1528861491.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:51.883Z,1528861491.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:52.257Z,1528861492.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:52.658Z,1528861492.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:53.056Z,1528861493.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:53.460Z,1528861493.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:53.868Z,1528861493.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:54.268Z,1528861494.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:54.664Z,1528861494.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:55.060Z,1528861495.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:55.457Z,1528861495.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:55.858Z,1528861495.858 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:55.858Z,1528861495.858 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2018-06-13T03:44:55.858Z,1528861495.858 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T03:44:55.860Z,1528861495.860 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:55.860Z,1528861495.860 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-06-13T03:44:55.860Z,1528861495.860 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T03:44:55.862Z,1528861495.862 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:55.862Z,1528861495.862 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-06-13T03:44:55.862Z,1528861495.862 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T03:44:55.938Z,1528861495.938 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T03:44:55.938Z,1528861495.938 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T03:44:55.938Z,1528861495.938 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T03:44:56.341Z,1528861496.341 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T03:44:56.341Z,1528861496.341 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2018-06-13T03:44:56.342Z,1528861496.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T03:44:56.342Z,1528861496.342 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-06-13T03:44:56.342Z,1528861496.342 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T03:44:56.342Z,1528861496.342 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-06-13T03:44:56.655Z,1528861496.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T03:44:56.656Z,1528861496.656 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:44:56.656Z,1528861496.656 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:44:56.656Z,1528861496.656 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T03:44:56.657Z,1528861496.657 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:44:56.657Z,1528861496.657 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:44:56.658Z,1528861496.658 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T03:44:56.658Z,1528861496.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:44:56.658Z,1528861496.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:44:57.074Z,1528861497.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T03:44:57.075Z,1528861497.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:57.475Z,1528861497.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T03:44:57.476Z,1528861497.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:57.867Z,1528861497.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T03:44:57.868Z,1528861497.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:58.268Z,1528861498.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T03:44:58.269Z,1528861498.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:58.673Z,1528861498.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T03:44:58.674Z,1528861498.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:59.064Z,1528861499.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T03:44:59.065Z,1528861499.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:59.460Z,1528861499.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T03:44:59.461Z,1528861499.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:44:59.880Z,1528861499.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T03:44:59.881Z,1528861499.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:00.271Z,1528861500.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T03:45:00.272Z,1528861500.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:00.671Z,1528861500.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T03:45:00.672Z,1528861500.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:01.069Z,1528861501.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T03:45:01.070Z,1528861501.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:01.464Z,1528861501.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T03:45:01.465Z,1528861501.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:01.873Z,1528861501.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T03:45:01.874Z,1528861501.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:02.279Z,1528861502.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T03:45:02.280Z,1528861502.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:02.649Z,1528861502.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T03:45:02.650Z,1528861502.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:03.080Z,1528861503.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T03:45:03.085Z,1528861503.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:03.481Z,1528861503.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T03:45:03.482Z,1528861503.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:03.882Z,1528861503.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T03:45:03.883Z,1528861503.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:04.280Z,1528861504.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T03:45:04.286Z,1528861504.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:04.660Z,1528861504.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T03:45:04.661Z,1528861504.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:05.056Z,1528861505.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T03:45:05.057Z,1528861505.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:05.460Z,1528861505.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T03:45:05.461Z,1528861505.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:05.867Z,1528861505.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T03:45:05.868Z,1528861505.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:06.267Z,1528861506.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T03:45:06.268Z,1528861506.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:06.663Z,1528861506.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T03:45:06.664Z,1528861506.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:07.060Z,1528861507.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T03:45:07.061Z,1528861507.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:07.456Z,1528861507.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T03:45:07.457Z,1528861507.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:07.858Z,1528861507.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T03:45:07.859Z,1528861507.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:08.266Z,1528861508.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T03:45:08.266Z,1528861508.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:08.656Z,1528861508.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T03:45:08.657Z,1528861508.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:09.018Z,1528861509.018 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T03:45:09.018Z,1528861509.018 [NAL9602] Data Fault, FailCount= 2
2018-06-13T03:45:09.018Z,1528861509.018 [NAL9602](ERROR): Data Fault
2018-06-13T03:45:09.080Z,1528861509.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T03:45:09.085Z,1528861509.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:09.173Z,1528861509.173 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T03:45:09.418Z,1528861509.418 [NAL9602](INFO): Powering down
2018-06-13T03:45:09.476Z,1528861509.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T03:45:09.486Z,1528861509.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:09.857Z,1528861509.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T03:45:09.858Z,1528861509.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:10.268Z,1528861510.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T03:45:10.273Z,1528861510.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:10.349Z,1528861510.349 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T03:45:10.349Z,1528861510.349 [NAL9602] No Fault, FailCount= 2
2018-06-13T03:45:10.660Z,1528861510.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T03:45:10.661Z,1528861510.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:11.056Z,1528861511.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T03:45:11.056Z,1528861511.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:11.464Z,1528861511.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T03:45:11.465Z,1528861511.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:11.868Z,1528861511.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T03:45:11.869Z,1528861511.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:12.259Z,1528861512.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T03:45:12.259Z,1528861512.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:12.664Z,1528861512.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T03:45:12.665Z,1528861512.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:13.067Z,1528861513.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T03:45:13.068Z,1528861513.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:13.465Z,1528861513.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T03:45:13.466Z,1528861513.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:13.864Z,1528861513.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T03:45:13.865Z,1528861513.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:14.267Z,1528861514.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T03:45:14.268Z,1528861514.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:14.671Z,1528861514.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T03:45:14.672Z,1528861514.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:15.064Z,1528861515.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T03:45:15.065Z,1528861515.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:15.462Z,1528861515.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T03:45:15.462Z,1528861515.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:15.872Z,1528861515.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:16.264Z,1528861516.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:16.662Z,1528861516.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:17.070Z,1528861517.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:17.464Z,1528861517.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:17.868Z,1528861517.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:20.969Z,1528861520.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:21.128Z,1528861521.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:21.515Z,1528861521.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:21.908Z,1528861521.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:22.316Z,1528861522.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:22.697Z,1528861522.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:23.100Z,1528861523.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:23.504Z,1528861523.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:23.899Z,1528861523.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:24.299Z,1528861524.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:24.700Z,1528861524.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:25.100Z,1528861525.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:25.495Z,1528861525.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:25.899Z,1528861525.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:26.299Z,1528861526.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:26.699Z,1528861526.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:27.099Z,1528861527.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:27.499Z,1528861527.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:27.899Z,1528861527.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:28.299Z,1528861528.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:28.699Z,1528861528.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:29.099Z,1528861529.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:29.504Z,1528861529.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:29.900Z,1528861529.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:30.299Z,1528861530.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:30.704Z,1528861530.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:31.100Z,1528861531.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:31.495Z,1528861531.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:31.904Z,1528861531.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:32.300Z,1528861532.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:32.695Z,1528861532.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:33.100Z,1528861533.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:33.500Z,1528861533.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:33.898Z,1528861533.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:34.302Z,1528861534.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:34.699Z,1528861534.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:35.104Z,1528861535.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:35.504Z,1528861535.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:35.898Z,1528861535.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:36.301Z,1528861536.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:36.700Z,1528861536.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:37.104Z,1528861537.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:37.498Z,1528861537.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:37.900Z,1528861537.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:38.297Z,1528861538.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:38.697Z,1528861538.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:39.104Z,1528861539.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:39.458Z,1528861539.458 [NAL9602](INFO): Powering up NAL9602
2018-06-13T03:45:39.502Z,1528861539.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:39.897Z,1528861539.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:40.299Z,1528861540.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:40.697Z,1528861540.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:41.100Z,1528861541.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:41.499Z,1528861541.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:41.897Z,1528861541.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:42.298Z,1528861542.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:42.699Z,1528861542.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:43.104Z,1528861543.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:43.497Z,1528861543.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:43.898Z,1528861543.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:44.304Z,1528861544.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:44.698Z,1528861544.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:45.103Z,1528861545.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:45.497Z,1528861545.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:45.898Z,1528861545.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:46.300Z,1528861546.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:46.696Z,1528861546.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:47.104Z,1528861547.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:47.500Z,1528861547.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:47.897Z,1528861547.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:48.299Z,1528861548.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:48.704Z,1528861548.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:49.104Z,1528861549.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:49.497Z,1528861549.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:49.899Z,1528861549.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:50.303Z,1528861550.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:50.665Z,1528861550.665 [NAL9602](INFO): NAL9602 initialized
2018-06-13T03:45:50.700Z,1528861550.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:51.101Z,1528861551.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:51.507Z,1528861551.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:51.911Z,1528861551.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:52.307Z,1528861552.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:52.701Z,1528861552.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:53.100Z,1528861553.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:53.502Z,1528861553.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:53.902Z,1528861553.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:54.307Z,1528861554.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:54.712Z,1528861554.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:55.112Z,1528861555.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:55.504Z,1528861555.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:55.901Z,1528861555.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:56.303Z,1528861556.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:56.707Z,1528861556.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:57.102Z,1528861557.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:57.513Z,1528861557.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:57.916Z,1528861557.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:58.316Z,1528861558.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:58.709Z,1528861558.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:59.102Z,1528861559.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:59.509Z,1528861559.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:45:59.904Z,1528861559.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:00.316Z,1528861560.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:00.716Z,1528861560.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:01.116Z,1528861561.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:01.502Z,1528861561.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:01.902Z,1528861561.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:02.305Z,1528861562.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:02.703Z,1528861562.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:03.108Z,1528861563.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:03.512Z,1528861563.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:03.916Z,1528861563.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:04.312Z,1528861564.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:04.703Z,1528861564.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:05.108Z,1528861565.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:05.502Z,1528861565.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:05.908Z,1528861565.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:06.317Z,1528861566.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:06.716Z,1528861566.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:07.112Z,1528861567.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:07.502Z,1528861567.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:07.902Z,1528861567.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:08.303Z,1528861568.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:08.703Z,1528861568.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:09.111Z,1528861569.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:09.512Z,1528861569.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:09.916Z,1528861569.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:10.316Z,1528861570.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:10.707Z,1528861570.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:11.105Z,1528861571.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:11.502Z,1528861571.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:11.905Z,1528861571.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:12.316Z,1528861572.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:12.716Z,1528861572.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:13.115Z,1528861573.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:13.501Z,1528861573.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:13.904Z,1528861573.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:14.304Z,1528861574.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:14.700Z,1528861574.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:15.103Z,1528861575.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:15.520Z,1528861575.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:15.913Z,1528861575.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:16.316Z,1528861576.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:16.709Z,1528861576.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:17.116Z,1528861577.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:17.513Z,1528861577.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:17.929Z,1528861577.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:18.319Z,1528861578.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:18.727Z,1528861578.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:19.126Z,1528861579.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:22.284Z,1528861582.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:22.448Z,1528861582.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:22.839Z,1528861582.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:23.240Z,1528861583.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:23.633Z,1528861583.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:24.024Z,1528861584.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:24.423Z,1528861584.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:24.821Z,1528861584.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:25.240Z,1528861585.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:25.632Z,1528861585.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:26.035Z,1528861586.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:26.424Z,1528861586.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:26.826Z,1528861586.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:27.236Z,1528861587.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:27.640Z,1528861587.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:28.028Z,1528861588.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:28.426Z,1528861588.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:28.823Z,1528861588.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:29.237Z,1528861589.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:29.634Z,1528861589.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:30.035Z,1528861590.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:30.421Z,1528861590.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:30.832Z,1528861590.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:31.234Z,1528861591.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:31.627Z,1528861591.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:32.028Z,1528861592.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:32.437Z,1528861592.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:32.827Z,1528861592.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:33.228Z,1528861593.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:33.637Z,1528861593.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:34.025Z,1528861594.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:34.421Z,1528861594.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:34.824Z,1528861594.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:35.238Z,1528861595.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:35.637Z,1528861595.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:36.035Z,1528861596.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:36.422Z,1528861596.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:36.821Z,1528861596.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:37.235Z,1528861597.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:37.634Z,1528861597.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:38.030Z,1528861598.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:38.425Z,1528861598.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:38.821Z,1528861598.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:39.229Z,1528861599.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:39.635Z,1528861599.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:40.025Z,1528861600.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:40.422Z,1528861600.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:40.823Z,1528861600.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:41.230Z,1528861601.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:41.634Z,1528861601.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:42.033Z,1528861602.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:42.428Z,1528861602.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:42.830Z,1528861602.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:43.234Z,1528861603.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:43.627Z,1528861603.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:44.029Z,1528861604.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:44.432Z,1528861604.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:44.824Z,1528861604.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:45.227Z,1528861605.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:45.635Z,1528861605.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:46.031Z,1528861606.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:46.430Z,1528861606.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:46.829Z,1528861606.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:47.235Z,1528861607.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:47.640Z,1528861607.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:48.042Z,1528861608.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:48.417Z,1528861608.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:48.815Z,1528861608.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:49.243Z,1528861609.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:49.643Z,1528861609.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:50.043Z,1528861610.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:50.416Z,1528861610.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:50.813Z,1528861610.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:51.244Z,1528861611.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:51.627Z,1528861611.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:52.027Z,1528861612.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:52.417Z,1528861612.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:52.819Z,1528861612.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:53.224Z,1528861613.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:53.627Z,1528861613.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:54.032Z,1528861614.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:54.419Z,1528861614.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:54.818Z,1528861614.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:55.230Z,1528861615.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:55.628Z,1528861615.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:56.028Z,1528861616.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:56.420Z,1528861616.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:56.819Z,1528861616.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:57.228Z,1528861617.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:57.627Z,1528861617.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:58.029Z,1528861618.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:58.420Z,1528861618.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:58.832Z,1528861618.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:59.225Z,1528861619.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:46:59.627Z,1528861619.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:00.027Z,1528861620.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:00.420Z,1528861620.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:00.819Z,1528861620.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:01.227Z,1528861621.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:01.625Z,1528861621.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:02.027Z,1528861622.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:02.432Z,1528861622.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:02.821Z,1528861622.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:03.228Z,1528861623.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:03.631Z,1528861623.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:04.028Z,1528861624.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:04.418Z,1528861624.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:04.828Z,1528861624.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:05.217Z,1528861625.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:05.625Z,1528861625.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:06.028Z,1528861626.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:06.429Z,1528861626.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:06.819Z,1528861626.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:07.220Z,1528861627.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:07.618Z,1528861627.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:08.018Z,1528861628.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:08.427Z,1528861628.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:08.828Z,1528861628.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:09.228Z,1528861629.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:09.619Z,1528861629.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:10.016Z,1528861630.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:10.420Z,1528861630.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:10.819Z,1528861630.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:11.227Z,1528861631.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:11.628Z,1528861631.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:12.029Z,1528861632.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:12.426Z,1528861632.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:12.820Z,1528861632.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:13.225Z,1528861633.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:13.617Z,1528861633.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:14.028Z,1528861634.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:14.429Z,1528861634.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:14.832Z,1528861634.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:15.229Z,1528861635.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:15.624Z,1528861635.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:16.017Z,1528861636.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:16.421Z,1528861636.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:16.821Z,1528861636.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:17.231Z,1528861637.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:17.632Z,1528861637.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:18.032Z,1528861638.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:21.155Z,1528861641.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:21.316Z,1528861641.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:21.711Z,1528861641.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:22.109Z,1528861642.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:22.502Z,1528861642.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:22.893Z,1528861642.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:23.323Z,1528861643.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:23.719Z,1528861643.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:24.122Z,1528861644.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:24.498Z,1528861644.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:24.896Z,1528861644.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:25.323Z,1528861645.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:25.719Z,1528861645.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:26.123Z,1528861646.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:26.496Z,1528861646.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:26.896Z,1528861646.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:27.301Z,1528861647.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:27.707Z,1528861647.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:28.103Z,1528861648.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:28.498Z,1528861648.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:28.908Z,1528861648.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:29.303Z,1528861649.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:29.707Z,1528861649.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:30.107Z,1528861650.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:30.497Z,1528861650.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:30.900Z,1528861650.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:31.307Z,1528861651.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:31.708Z,1528861651.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:32.104Z,1528861652.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:32.501Z,1528861652.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:32.896Z,1528861652.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:33.308Z,1528861653.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:33.707Z,1528861653.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:34.104Z,1528861654.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:34.500Z,1528861654.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:34.906Z,1528861654.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:35.305Z,1528861655.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:35.712Z,1528861655.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:36.108Z,1528861656.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:36.497Z,1528861656.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:36.909Z,1528861656.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:37.312Z,1528861657.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:37.712Z,1528861657.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:38.108Z,1528861658.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:38.500Z,1528861658.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:38.896Z,1528861658.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:39.312Z,1528861659.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:39.709Z,1528861659.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:40.108Z,1528861660.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:40.499Z,1528861660.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:40.912Z,1528861660.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:41.309Z,1528861661.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:41.720Z,1528861661.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:42.112Z,1528861662.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:42.497Z,1528861662.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:42.904Z,1528861662.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:43.313Z,1528861663.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:43.710Z,1528861663.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:44.108Z,1528861664.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:44.501Z,1528861664.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:44.896Z,1528861664.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:45.310Z,1528861665.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:45.713Z,1528861665.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:46.105Z,1528861666.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:46.503Z,1528861666.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:46.903Z,1528861666.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:47.312Z,1528861667.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:47.710Z,1528861667.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:48.120Z,1528861668.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:48.502Z,1528861668.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:48.907Z,1528861668.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:49.314Z,1528861669.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:49.710Z,1528861669.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:50.111Z,1528861670.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:50.504Z,1528861670.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:50.897Z,1528861670.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:51.310Z,1528861671.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:51.714Z,1528861671.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:52.105Z,1528861672.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:52.500Z,1528861672.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:52.902Z,1528861672.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:53.306Z,1528861673.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:53.712Z,1528861673.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:54.121Z,1528861674.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:54.507Z,1528861674.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:54.900Z,1528861674.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:55.303Z,1528861675.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:55.709Z,1528861675.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:56.117Z,1528861676.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:56.509Z,1528861676.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:56.905Z,1528861676.905 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:56.906Z,1528861676.906 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2018-06-13T03:47:56.906Z,1528861676.906 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T03:47:56.907Z,1528861676.907 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:56.908Z,1528861676.908 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-06-13T03:47:56.908Z,1528861676.908 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T03:47:56.909Z,1528861676.909 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:56.910Z,1528861676.910 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-06-13T03:47:56.910Z,1528861676.910 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T03:47:56.981Z,1528861676.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T03:47:56.981Z,1528861676.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T03:47:56.982Z,1528861676.982 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T03:47:57.381Z,1528861677.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T03:47:57.381Z,1528861677.381 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2018-06-13T03:47:57.382Z,1528861677.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T03:47:57.382Z,1528861677.382 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-06-13T03:47:57.382Z,1528861677.382 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T03:47:57.382Z,1528861677.382 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-06-13T03:47:57.710Z,1528861677.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T03:47:57.710Z,1528861677.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:47:57.711Z,1528861677.711 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:47:57.711Z,1528861677.711 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T03:47:57.712Z,1528861677.712 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:47:57.712Z,1528861677.712 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:47:57.712Z,1528861677.712 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T03:47:57.713Z,1528861677.713 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:47:57.713Z,1528861677.713 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:47:58.109Z,1528861678.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T03:47:58.110Z,1528861678.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:58.510Z,1528861678.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T03:47:58.511Z,1528861678.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:58.916Z,1528861678.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T03:47:58.917Z,1528861678.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:59.314Z,1528861679.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T03:47:59.315Z,1528861679.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:47:59.712Z,1528861679.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T03:47:59.717Z,1528861679.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:00.089Z,1528861680.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T03:48:00.090Z,1528861680.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:00.491Z,1528861680.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T03:48:00.492Z,1528861680.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:00.892Z,1528861680.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T03:48:00.893Z,1528861680.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:01.295Z,1528861681.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T03:48:01.296Z,1528861681.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:01.722Z,1528861681.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T03:48:01.723Z,1528861681.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:02.120Z,1528861682.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T03:48:02.121Z,1528861682.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:02.523Z,1528861682.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T03:48:02.524Z,1528861682.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:02.888Z,1528861682.888 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T03:48:02.888Z,1528861682.888 [BPC1] Communications Fault, FailCount= 3
2018-06-13T03:48:02.888Z,1528861682.888 [BPC1](ERROR): Communications Fault
2018-06-13T03:48:02.928Z,1528861682.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T03:48:02.933Z,1528861682.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:03.013Z,1528861683.013 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T03:48:03.296Z,1528861683.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T03:48:03.297Z,1528861683.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:03.696Z,1528861683.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T03:48:03.697Z,1528861683.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:04.095Z,1528861684.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T03:48:04.096Z,1528861684.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:04.189Z,1528861684.189 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T03:48:04.189Z,1528861684.189 [BPC1] No Fault, FailCount= 3
2018-06-13T03:48:04.568Z,1528861684.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T03:48:04.569Z,1528861684.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:04.928Z,1528861684.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T03:48:04.929Z,1528861684.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:05.326Z,1528861685.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T03:48:05.327Z,1528861685.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:05.695Z,1528861685.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T03:48:05.696Z,1528861685.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:06.094Z,1528861686.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T03:48:06.095Z,1528861686.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:06.500Z,1528861686.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T03:48:06.500Z,1528861686.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:06.897Z,1528861686.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T03:48:06.898Z,1528861686.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:07.297Z,1528861687.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T03:48:07.298Z,1528861687.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:07.706Z,1528861687.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T03:48:07.707Z,1528861687.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:08.107Z,1528861688.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T03:48:08.107Z,1528861688.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:08.507Z,1528861688.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T03:48:08.508Z,1528861688.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:08.904Z,1528861688.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T03:48:08.906Z,1528861688.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:09.296Z,1528861689.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T03:48:09.298Z,1528861689.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:09.699Z,1528861689.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T03:48:09.700Z,1528861689.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:10.100Z,1528861690.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T03:48:10.101Z,1528861690.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:10.502Z,1528861690.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T03:48:10.503Z,1528861690.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:10.907Z,1528861690.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T03:48:10.908Z,1528861690.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:11.306Z,1528861691.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T03:48:11.307Z,1528861691.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:11.704Z,1528861691.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T03:48:11.705Z,1528861691.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:12.097Z,1528861692.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T03:48:12.098Z,1528861692.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:12.497Z,1528861692.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T03:48:12.498Z,1528861692.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:12.897Z,1528861692.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T03:48:12.898Z,1528861692.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:13.295Z,1528861693.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T03:48:13.295Z,1528861693.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:13.704Z,1528861693.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T03:48:13.704Z,1528861693.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:14.106Z,1528861694.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T03:48:14.107Z,1528861694.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:14.532Z,1528861694.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T03:48:14.533Z,1528861694.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:14.900Z,1528861694.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T03:48:14.901Z,1528861694.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:15.296Z,1528861695.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T03:48:15.297Z,1528861695.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:15.703Z,1528861695.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T03:48:15.704Z,1528861695.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:16.096Z,1528861696.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T03:48:16.098Z,1528861696.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:16.503Z,1528861696.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T03:48:16.504Z,1528861696.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:16.906Z,1528861696.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:17.303Z,1528861697.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:17.699Z,1528861697.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:17.702Z,1528861697.702 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T03:48:17.702Z,1528861697.702 [Default:CheckIn:C.Wait] Stopped
2018-06-13T03:48:17.702Z,1528861697.702 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T03:48:17.702Z,1528861697.702 [Default:CheckIn:D] Running Loop=1
2018-06-13T03:48:18.100Z,1528861698.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:18.103Z,1528861698.103 [Default:CheckIn:D] Stopped
2018-06-13T03:48:18.103Z,1528861698.103 [Default:CheckIn:E] Running Loop=1
2018-06-13T03:48:21.234Z,1528861701.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:21.237Z,1528861701.237 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.077629 min 
2018-06-13T03:48:21.237Z,1528861701.237 [Default:CheckIn:E] Stopped
2018-06-13T03:48:21.237Z,1528861701.237 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T03:48:21.237Z,1528861701.237 [Default:CheckIn] Stopped
2018-06-13T03:48:21.238Z,1528861701.238 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T03:48:21.238Z,1528861701.238 [Default:CheckIn](INFO): Running loop #3
2018-06-13T03:48:21.238Z,1528861701.238 [Default:CheckIn] Running Loop=3
2018-06-13T03:48:21.238Z,1528861701.238 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T03:48:21.238Z,1528861701.238 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T03:48:21.378Z,1528861701.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:21.798Z,1528861701.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:22.193Z,1528861702.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:22.591Z,1528861702.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:22.969Z,1528861702.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:23.371Z,1528861703.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:23.789Z,1528861703.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:24.172Z,1528861704.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:24.595Z,1528861704.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:24.995Z,1528861704.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:25.396Z,1528861705.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:25.773Z,1528861705.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:26.171Z,1528861706.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:26.580Z,1528861706.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:26.972Z,1528861706.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:27.399Z,1528861707.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:27.782Z,1528861707.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:28.207Z,1528861708.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:28.575Z,1528861708.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:28.975Z,1528861708.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:29.407Z,1528861709.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:29.782Z,1528861709.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:30.182Z,1528861710.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:30.574Z,1528861710.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:30.974Z,1528861710.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:31.383Z,1528861711.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:31.783Z,1528861711.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:32.179Z,1528861712.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:32.583Z,1528861712.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:32.982Z,1528861712.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:33.384Z,1528861713.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:33.783Z,1528861713.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:34.181Z,1528861714.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:34.576Z,1528861714.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:34.978Z,1528861714.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:35.380Z,1528861715.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:35.783Z,1528861715.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:36.183Z,1528861716.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:36.576Z,1528861716.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:36.976Z,1528861716.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:37.384Z,1528861717.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:37.785Z,1528861717.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:38.180Z,1528861718.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:38.588Z,1528861718.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:38.972Z,1528861718.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:39.379Z,1528861719.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:39.783Z,1528861719.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:40.180Z,1528861720.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:40.578Z,1528861720.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:40.977Z,1528861720.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:41.381Z,1528861721.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:41.783Z,1528861721.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:42.183Z,1528861722.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:42.572Z,1528861722.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:42.986Z,1528861722.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:43.378Z,1528861723.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:43.781Z,1528861723.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:44.188Z,1528861724.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:44.592Z,1528861724.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:44.976Z,1528861724.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:45.376Z,1528861725.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:45.781Z,1528861725.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:46.175Z,1528861726.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:46.587Z,1528861726.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:46.984Z,1528861726.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:47.388Z,1528861727.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:47.786Z,1528861727.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:48.188Z,1528861728.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:48.576Z,1528861728.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:48.977Z,1528861728.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:49.376Z,1528861729.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:49.788Z,1528861729.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:50.188Z,1528861730.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:50.585Z,1528861730.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:50.980Z,1528861730.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:51.376Z,1528861731.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:51.783Z,1528861731.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:52.180Z,1528861732.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:52.584Z,1528861732.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:52.989Z,1528861732.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:53.382Z,1528861733.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:53.776Z,1528861733.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:54.180Z,1528861734.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:54.580Z,1528861734.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:54.977Z,1528861734.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:55.384Z,1528861735.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:55.781Z,1528861735.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:56.187Z,1528861736.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:56.590Z,1528861736.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:56.979Z,1528861736.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:57.378Z,1528861737.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:57.784Z,1528861737.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:58.172Z,1528861738.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:58.588Z,1528861738.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:58.989Z,1528861738.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:59.382Z,1528861739.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:48:59.774Z,1528861739.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:00.176Z,1528861740.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:00.572Z,1528861740.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:00.975Z,1528861740.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:01.377Z,1528861741.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:01.781Z,1528861741.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:02.188Z,1528861742.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:02.588Z,1528861742.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:02.972Z,1528861742.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:03.374Z,1528861743.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:03.786Z,1528861743.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:04.177Z,1528861744.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:04.586Z,1528861744.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:05.028Z,1528861745.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:05.384Z,1528861745.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:05.776Z,1528861745.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:06.182Z,1528861746.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:06.576Z,1528861746.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:06.984Z,1528861746.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:07.386Z,1528861747.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:07.783Z,1528861747.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:08.196Z,1528861748.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:08.590Z,1528861748.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:08.984Z,1528861748.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:09.376Z,1528861749.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:09.786Z,1528861749.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:10.169Z,1528861750.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:10.601Z,1528861750.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:11.020Z,1528861751.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:11.405Z,1528861751.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:11.772Z,1528861751.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:12.173Z,1528861752.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:12.572Z,1528861752.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:13.012Z,1528861753.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:13.372Z,1528861753.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:13.775Z,1528861753.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:14.202Z,1528861754.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:14.603Z,1528861754.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:14.971Z,1528861754.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:15.371Z,1528861755.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:15.774Z,1528861755.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:16.174Z,1528861756.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:16.579Z,1528861756.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:16.983Z,1528861756.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:17.380Z,1528861757.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:17.776Z,1528861757.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:18.176Z,1528861758.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:21.315Z,1528861761.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:21.456Z,1528861761.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:21.866Z,1528861761.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:22.263Z,1528861762.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:22.658Z,1528861762.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:23.040Z,1528861763.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:23.436Z,1528861763.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:23.869Z,1528861763.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:24.275Z,1528861764.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:24.647Z,1528861764.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:25.069Z,1528861765.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:25.471Z,1528861765.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:25.845Z,1528861765.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:26.244Z,1528861766.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:26.642Z,1528861766.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:27.040Z,1528861767.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:27.455Z,1528861767.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:27.856Z,1528861767.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:28.252Z,1528861768.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:28.652Z,1528861768.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:29.047Z,1528861769.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:29.449Z,1528861769.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:29.855Z,1528861769.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:30.255Z,1528861770.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:30.643Z,1528861770.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:31.044Z,1528861771.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:31.448Z,1528861771.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:31.856Z,1528861771.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:32.248Z,1528861772.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:32.660Z,1528861772.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:33.048Z,1528861773.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:33.449Z,1528861773.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:33.851Z,1528861773.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:34.252Z,1528861774.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:34.660Z,1528861774.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:35.056Z,1528861775.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:35.454Z,1528861775.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:35.848Z,1528861775.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:36.257Z,1528861776.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:36.660Z,1528861776.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:37.048Z,1528861777.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:37.449Z,1528861777.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:37.860Z,1528861777.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:38.255Z,1528861778.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:38.655Z,1528861778.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:39.040Z,1528861779.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:39.452Z,1528861779.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:39.848Z,1528861779.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:40.242Z,1528861780.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:40.656Z,1528861780.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:41.055Z,1528861781.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:41.453Z,1528861781.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:41.843Z,1528861781.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:42.250Z,1528861782.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:42.640Z,1528861782.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:43.044Z,1528861783.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:43.448Z,1528861783.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:43.852Z,1528861783.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:44.256Z,1528861784.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:44.656Z,1528861784.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:45.047Z,1528861785.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:45.447Z,1528861785.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:45.850Z,1528861785.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:46.243Z,1528861786.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:46.656Z,1528861786.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:47.056Z,1528861787.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:47.453Z,1528861787.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:47.852Z,1528861787.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:48.250Z,1528861788.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:48.642Z,1528861788.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:49.055Z,1528861789.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:49.468Z,1528861789.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:49.860Z,1528861789.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:50.255Z,1528861790.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:50.657Z,1528861790.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:51.044Z,1528861791.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:51.452Z,1528861791.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:51.850Z,1528861791.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:52.251Z,1528861792.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:52.657Z,1528861792.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:53.057Z,1528861793.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:53.460Z,1528861793.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:53.849Z,1528861793.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:54.251Z,1528861794.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:54.651Z,1528861794.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:55.052Z,1528861795.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:55.456Z,1528861795.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:55.864Z,1528861795.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:56.268Z,1528861796.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:56.661Z,1528861796.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:57.058Z,1528861797.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:57.453Z,1528861797.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:57.858Z,1528861797.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:58.242Z,1528861798.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:58.666Z,1528861798.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:59.073Z,1528861799.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:59.465Z,1528861799.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:49:59.840Z,1528861799.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:00.236Z,1528861800.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:00.640Z,1528861800.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:01.042Z,1528861801.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:01.480Z,1528861801.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:01.872Z,1528861801.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:02.265Z,1528861802.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:02.671Z,1528861802.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:03.039Z,1528861803.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:03.441Z,1528861803.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:03.872Z,1528861803.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:04.262Z,1528861804.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:04.655Z,1528861804.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:05.047Z,1528861805.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:05.448Z,1528861805.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:05.844Z,1528861805.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:06.244Z,1528861806.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:06.640Z,1528861806.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:07.045Z,1528861807.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:07.440Z,1528861807.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:07.847Z,1528861807.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:08.275Z,1528861808.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:08.655Z,1528861808.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:09.042Z,1528861809.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:09.446Z,1528861809.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:09.844Z,1528861809.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:10.257Z,1528861810.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:10.656Z,1528861810.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:11.057Z,1528861811.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:11.455Z,1528861811.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:11.852Z,1528861811.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:12.250Z,1528861812.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:12.648Z,1528861812.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:13.056Z,1528861813.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:13.448Z,1528861813.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:13.860Z,1528861813.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:14.263Z,1528861814.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:14.665Z,1528861814.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:15.052Z,1528861815.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:15.452Z,1528861815.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:15.849Z,1528861815.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:16.245Z,1528861816.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:16.657Z,1528861816.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:17.060Z,1528861817.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:17.464Z,1528861817.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:17.856Z,1528861817.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:18.251Z,1528861818.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:21.360Z,1528861821.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:21.520Z,1528861821.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:21.914Z,1528861821.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:22.313Z,1528861822.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:22.705Z,1528861822.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:23.104Z,1528861823.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:23.496Z,1528861823.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:23.902Z,1528861823.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:24.299Z,1528861824.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:24.709Z,1528861824.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:25.108Z,1528861825.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:25.510Z,1528861825.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:25.904Z,1528861825.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:26.296Z,1528861826.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:26.704Z,1528861826.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:27.104Z,1528861827.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:27.504Z,1528861827.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:27.910Z,1528861827.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:28.309Z,1528861828.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:28.709Z,1528861828.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:29.098Z,1528861829.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:29.496Z,1528861829.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:29.897Z,1528861829.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:30.297Z,1528861830.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:30.707Z,1528861830.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:31.109Z,1528861831.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:31.509Z,1528861831.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:31.903Z,1528861831.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:32.296Z,1528861832.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:32.698Z,1528861832.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:33.096Z,1528861833.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:33.496Z,1528861833.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:33.913Z,1528861833.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:34.309Z,1528861834.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:34.704Z,1528861834.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:35.098Z,1528861835.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:35.504Z,1528861835.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:35.897Z,1528861835.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:36.298Z,1528861836.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:36.709Z,1528861836.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:37.109Z,1528861837.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:37.512Z,1528861837.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:37.897Z,1528861837.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:38.304Z,1528861838.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:38.703Z,1528861838.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:39.098Z,1528861839.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:39.504Z,1528861839.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:39.921Z,1528861839.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:40.311Z,1528861840.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:40.708Z,1528861840.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:41.109Z,1528861841.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:41.509Z,1528861841.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:41.898Z,1528861841.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:42.292Z,1528861842.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:42.712Z,1528861842.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:43.120Z,1528861843.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:43.518Z,1528861843.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:43.887Z,1528861843.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:44.313Z,1528861844.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:44.692Z,1528861844.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:45.089Z,1528861845.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:45.491Z,1528861845.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:45.923Z,1528861845.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:46.320Z,1528861846.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:46.703Z,1528861846.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:47.096Z,1528861847.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:47.493Z,1528861847.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:47.896Z,1528861847.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:48.295Z,1528861848.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:48.699Z,1528861848.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:49.124Z,1528861849.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:49.503Z,1528861849.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:49.900Z,1528861849.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:50.294Z,1528861850.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:50.696Z,1528861850.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:51.091Z,1528861851.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:51.494Z,1528861851.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:51.904Z,1528861851.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:52.305Z,1528861852.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:52.730Z,1528861852.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:53.098Z,1528861853.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:53.500Z,1528861853.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:53.900Z,1528861853.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:54.310Z,1528861854.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:54.705Z,1528861854.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:55.108Z,1528861855.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:55.505Z,1528861855.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:55.893Z,1528861855.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:56.296Z,1528861856.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:56.703Z,1528861856.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:57.093Z,1528861857.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:57.494Z,1528861857.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:57.912Z,1528861857.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:57.914Z,1528861857.914 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2018-06-13T03:50:57.914Z,1528861857.914 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T03:50:57.915Z,1528861857.915 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:57.916Z,1528861857.916 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-06-13T03:50:57.916Z,1528861857.916 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T03:50:57.934Z,1528861857.934 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:57.934Z,1528861857.934 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-06-13T03:50:57.934Z,1528861857.934 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T03:50:58.013Z,1528861858.013 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T03:50:58.013Z,1528861858.013 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T03:50:58.014Z,1528861858.014 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T03:50:58.381Z,1528861858.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T03:50:58.381Z,1528861858.381 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2018-06-13T03:50:58.382Z,1528861858.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T03:50:58.382Z,1528861858.382 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-06-13T03:50:58.382Z,1528861858.382 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T03:50:58.382Z,1528861858.382 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-06-13T03:50:58.706Z,1528861858.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T03:50:58.706Z,1528861858.706 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:50:58.707Z,1528861858.707 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:50:58.707Z,1528861858.707 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T03:50:58.708Z,1528861858.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:50:58.708Z,1528861858.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:50:58.708Z,1528861858.708 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T03:50:58.709Z,1528861858.709 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:50:58.709Z,1528861858.709 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:50:59.104Z,1528861859.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T03:50:59.104Z,1528861859.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:59.500Z,1528861859.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T03:50:59.501Z,1528861859.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:50:59.896Z,1528861859.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T03:50:59.897Z,1528861859.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:00.299Z,1528861860.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T03:51:00.299Z,1528861860.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:00.712Z,1528861860.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T03:51:00.713Z,1528861860.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:01.108Z,1528861861.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T03:51:01.109Z,1528861861.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:01.513Z,1528861861.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T03:51:01.514Z,1528861861.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:01.896Z,1528861861.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T03:51:01.897Z,1528861861.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:02.295Z,1528861862.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T03:51:02.296Z,1528861862.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:02.699Z,1528861862.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T03:51:02.700Z,1528861862.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:03.097Z,1528861863.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T03:51:03.098Z,1528861863.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:03.508Z,1528861863.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T03:51:03.513Z,1528861863.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:03.910Z,1528861863.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T03:51:03.911Z,1528861863.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:04.307Z,1528861864.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T03:51:04.308Z,1528861864.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:04.705Z,1528861864.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T03:51:04.706Z,1528861864.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:05.104Z,1528861865.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T03:51:05.105Z,1528861865.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:05.480Z,1528861865.480 [BPC1](ERROR): Failed to parse Bank A battery data
2018-06-13T03:51:05.511Z,1528861865.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T03:51:05.511Z,1528861865.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:05.904Z,1528861865.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T03:51:05.905Z,1528861865.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:06.308Z,1528861866.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T03:51:06.309Z,1528861866.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:06.705Z,1528861866.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T03:51:06.706Z,1528861866.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:07.108Z,1528861867.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T03:51:07.109Z,1528861867.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:07.511Z,1528861867.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T03:51:07.511Z,1528861867.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:07.900Z,1528861867.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T03:51:07.905Z,1528861867.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:08.304Z,1528861868.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T03:51:08.306Z,1528861868.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:08.705Z,1528861868.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T03:51:08.706Z,1528861868.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:09.089Z,1528861869.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T03:51:09.090Z,1528861869.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:09.496Z,1528861869.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T03:51:09.513Z,1528861869.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:09.919Z,1528861869.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T03:51:09.920Z,1528861869.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:10.302Z,1528861870.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T03:51:10.303Z,1528861870.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:10.698Z,1528861870.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T03:51:10.699Z,1528861870.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:11.095Z,1528861871.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T03:51:11.096Z,1528861871.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:11.492Z,1528861871.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T03:51:11.492Z,1528861871.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:11.895Z,1528861871.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T03:51:11.896Z,1528861871.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:12.300Z,1528861872.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T03:51:12.301Z,1528861872.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:12.700Z,1528861872.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T03:51:12.701Z,1528861872.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:13.108Z,1528861873.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T03:51:13.109Z,1528861873.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:13.508Z,1528861873.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T03:51:13.509Z,1528861873.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:13.892Z,1528861873.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T03:51:13.893Z,1528861873.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:14.294Z,1528861874.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T03:51:14.295Z,1528861874.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:14.699Z,1528861874.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T03:51:14.700Z,1528861874.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:15.102Z,1528861875.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T03:51:15.103Z,1528861875.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:15.495Z,1528861875.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T03:51:15.496Z,1528861875.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:15.910Z,1528861875.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T03:51:15.910Z,1528861875.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:16.308Z,1528861876.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T03:51:16.310Z,1528861876.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:16.704Z,1528861876.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T03:51:16.705Z,1528861876.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:17.101Z,1528861877.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T03:51:17.102Z,1528861877.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:17.500Z,1528861877.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T03:51:17.501Z,1528861877.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:17.904Z,1528861877.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T03:51:17.905Z,1528861877.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:18.295Z,1528861878.295 [BPC1](ERROR): Failed to parse message.
2018-06-13T03:51:18.296Z,1528861878.296 [BPC1](ERROR): Failed to parse Bank A battery data
2018-06-13T03:51:18.304Z,1528861878.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:21.443Z,1528861881.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:21.596Z,1528861881.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:21.998Z,1528861881.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:22.392Z,1528861882.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:22.788Z,1528861882.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:23.190Z,1528861883.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:23.576Z,1528861883.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:23.999Z,1528861883.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:24.408Z,1528861884.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:24.807Z,1528861884.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:25.176Z,1528861885.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:25.576Z,1528861885.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:25.978Z,1528861885.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:26.384Z,1528861886.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:26.806Z,1528861886.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:27.211Z,1528861887.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:27.603Z,1528861887.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:27.984Z,1528861887.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:28.374Z,1528861888.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:28.776Z,1528861888.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:29.184Z,1528861889.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:29.579Z,1528861889.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:29.984Z,1528861889.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:30.408Z,1528861890.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:30.785Z,1528861890.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:31.177Z,1528861891.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:31.579Z,1528861891.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:31.980Z,1528861891.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:32.378Z,1528861892.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:32.787Z,1528861892.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:33.183Z,1528861893.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:33.589Z,1528861893.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:34.016Z,1528861894.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:34.379Z,1528861894.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:34.780Z,1528861894.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:35.186Z,1528861895.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:35.578Z,1528861895.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:35.987Z,1528861895.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:36.389Z,1528861896.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:36.789Z,1528861896.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:37.180Z,1528861897.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:37.592Z,1528861897.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:37.990Z,1528861897.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:38.380Z,1528861898.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:38.796Z,1528861898.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:39.188Z,1528861899.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:39.592Z,1528861899.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:39.981Z,1528861899.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:40.377Z,1528861900.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:40.781Z,1528861900.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:41.183Z,1528861901.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:41.580Z,1528861901.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:41.989Z,1528861901.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:42.394Z,1528861902.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:42.798Z,1528861902.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:43.181Z,1528861903.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:43.582Z,1528861903.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:43.979Z,1528861903.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:44.381Z,1528861904.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:44.794Z,1528861904.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:45.188Z,1528861905.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:45.589Z,1528861905.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:45.983Z,1528861905.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:46.380Z,1528861906.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:46.780Z,1528861906.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:47.180Z,1528861907.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:47.583Z,1528861907.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:47.989Z,1528861907.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:48.394Z,1528861908.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:48.785Z,1528861908.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:49.180Z,1528861909.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:49.594Z,1528861909.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:49.992Z,1528861909.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:50.387Z,1528861910.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:50.794Z,1528861910.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:51.192Z,1528861911.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:51.589Z,1528861911.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:51.992Z,1528861911.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:52.393Z,1528861912.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:52.780Z,1528861912.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:53.183Z,1528861913.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:53.572Z,1528861913.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:53.998Z,1528861913.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:54.397Z,1528861914.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:54.798Z,1528861914.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:55.173Z,1528861915.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:55.592Z,1528861915.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:55.976Z,1528861915.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:56.377Z,1528861916.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:56.787Z,1528861916.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:57.184Z,1528861917.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:57.583Z,1528861917.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:57.980Z,1528861917.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:58.376Z,1528861918.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:58.777Z,1528861918.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:59.182Z,1528861919.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:59.576Z,1528861919.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:51:59.985Z,1528861919.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:00.387Z,1528861920.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:00.784Z,1528861920.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:01.180Z,1528861921.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:01.580Z,1528861921.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:01.976Z,1528861921.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:02.380Z,1528861922.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:02.787Z,1528861922.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:03.188Z,1528861923.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:03.585Z,1528861923.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:03.980Z,1528861923.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:04.376Z,1528861924.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:04.788Z,1528861924.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:05.181Z,1528861925.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:05.577Z,1528861925.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:05.987Z,1528861925.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:06.388Z,1528861926.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:06.785Z,1528861926.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:07.179Z,1528861927.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:07.581Z,1528861927.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:07.976Z,1528861927.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:08.390Z,1528861928.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:08.790Z,1528861928.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:09.188Z,1528861929.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:09.588Z,1528861929.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:09.979Z,1528861929.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:10.376Z,1528861930.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:10.778Z,1528861930.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:11.176Z,1528861931.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:11.586Z,1528861931.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:11.987Z,1528861931.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:12.388Z,1528861932.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:12.788Z,1528861932.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:13.180Z,1528861933.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:13.577Z,1528861933.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:13.985Z,1528861933.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:14.380Z,1528861934.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:14.788Z,1528861934.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:15.188Z,1528861935.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:15.593Z,1528861935.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:15.979Z,1528861935.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:16.386Z,1528861936.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:16.780Z,1528861936.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:17.180Z,1528861937.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:17.577Z,1528861937.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:17.991Z,1528861937.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:18.391Z,1528861938.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:18.788Z,1528861938.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:19.184Z,1528861939.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:19.584Z,1528861939.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:22.721Z,1528861942.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:22.876Z,1528861942.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:23.284Z,1528861943.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:23.674Z,1528861943.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:24.071Z,1528861944.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:24.472Z,1528861944.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:24.848Z,1528861944.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:25.265Z,1528861945.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:25.652Z,1528861945.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:26.071Z,1528861946.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:26.477Z,1528861946.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:26.884Z,1528861946.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:27.249Z,1528861947.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:27.669Z,1528861947.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:28.053Z,1528861948.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:28.480Z,1528861948.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:28.884Z,1528861948.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:29.267Z,1528861949.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:29.664Z,1528861949.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:30.060Z,1528861950.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:30.458Z,1528861950.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:30.864Z,1528861950.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:31.259Z,1528861951.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:31.658Z,1528861951.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:32.064Z,1528861952.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:32.467Z,1528861952.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:32.863Z,1528861952.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:33.264Z,1528861953.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:33.664Z,1528861953.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:34.059Z,1528861954.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:34.464Z,1528861954.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:34.863Z,1528861954.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:35.265Z,1528861955.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:35.663Z,1528861955.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:36.058Z,1528861956.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:36.459Z,1528861956.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:36.858Z,1528861956.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:37.257Z,1528861957.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:37.658Z,1528861957.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:38.064Z,1528861958.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:38.467Z,1528861958.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:38.894Z,1528861958.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:39.264Z,1528861959.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:39.664Z,1528861959.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:40.068Z,1528861960.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:40.458Z,1528861960.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:40.872Z,1528861960.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:41.272Z,1528861961.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:41.669Z,1528861961.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:42.064Z,1528861962.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:42.464Z,1528861962.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:42.868Z,1528861962.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:43.261Z,1528861963.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:43.668Z,1528861963.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:44.073Z,1528861964.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:44.472Z,1528861964.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:44.873Z,1528861964.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:45.262Z,1528861965.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:45.668Z,1528861965.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:46.068Z,1528861966.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:46.468Z,1528861966.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:46.869Z,1528861966.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:47.273Z,1528861967.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:47.673Z,1528861967.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:48.064Z,1528861968.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:48.459Z,1528861968.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:48.861Z,1528861968.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:49.261Z,1528861969.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:49.668Z,1528861969.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:50.076Z,1528861970.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:50.473Z,1528861970.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:50.884Z,1528861970.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:51.257Z,1528861971.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:51.661Z,1528861971.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:52.062Z,1528861972.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:52.468Z,1528861972.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:52.870Z,1528861972.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:53.280Z,1528861973.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:53.666Z,1528861973.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:54.068Z,1528861974.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:54.466Z,1528861974.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:54.857Z,1528861974.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:55.262Z,1528861975.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:55.664Z,1528861975.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:56.065Z,1528861976.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:56.470Z,1528861976.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:56.874Z,1528861976.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:57.268Z,1528861977.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:57.664Z,1528861977.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:58.072Z,1528861978.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:58.460Z,1528861978.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:58.869Z,1528861978.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:59.284Z,1528861979.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:52:59.667Z,1528861979.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:00.060Z,1528861980.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:00.464Z,1528861980.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:00.862Z,1528861980.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:01.262Z,1528861981.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:01.673Z,1528861981.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:02.076Z,1528861982.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:02.480Z,1528861982.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:02.874Z,1528861982.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:03.248Z,1528861983.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:03.672Z,1528861983.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:04.055Z,1528861984.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:04.456Z,1528861984.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:04.878Z,1528861984.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:05.290Z,1528861985.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:05.679Z,1528861985.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:06.058Z,1528861986.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:06.457Z,1528861986.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:06.852Z,1528861986.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:07.279Z,1528861987.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:07.656Z,1528861987.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:08.081Z,1528861988.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:08.467Z,1528861988.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:08.888Z,1528861988.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:09.256Z,1528861989.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:09.656Z,1528861989.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:10.075Z,1528861990.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:10.456Z,1528861990.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:10.872Z,1528861990.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:11.267Z,1528861991.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:11.672Z,1528861991.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:12.058Z,1528861992.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:12.460Z,1528861992.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:12.857Z,1528861992.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:13.260Z,1528861993.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:13.663Z,1528861993.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:14.068Z,1528861994.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:14.467Z,1528861994.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:14.867Z,1528861994.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:15.256Z,1528861995.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:15.659Z,1528861995.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:16.066Z,1528861996.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:16.456Z,1528861996.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:16.867Z,1528861996.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:17.268Z,1528861997.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:17.672Z,1528861997.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:18.063Z,1528861998.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:18.468Z,1528861998.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:21.571Z,1528862001.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:21.575Z,1528862001.575 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T03:48:21.2Z
2018-06-13T03:53:21.575Z,1528862001.575 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T03:53:21.575Z,1528862001.575 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T03:53:21.759Z,1528862001.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:22.903Z,1528862002.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:23.054Z,1528862003.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:23.462Z,1528862003.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:23.860Z,1528862003.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:27.012Z,1528862007.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:27.105Z,1528862007.105 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0012.lzma
2018-06-13T03:53:27.201Z,1528862007.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:27.573Z,1528862007.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:27.905Z,1528862007.905 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0012.lzma.bak
2018-06-13T03:53:27.906Z,1528862007.906 [DataOverHttps](INFO): SBD MOMSN=8328519
2018-06-13T03:53:27.982Z,1528862007.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:29.856Z,1528862009.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:30.019Z,1528862010.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:33.136Z,1528862013.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:33.301Z,1528862013.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:33.718Z,1528862013.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:34.118Z,1528862014.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:34.511Z,1528862014.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:34.894Z,1528862014.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:35.299Z,1528862015.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:35.696Z,1528862015.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:36.124Z,1528862016.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:39.386Z,1528862019.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:39.477Z,1528862019.477 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0013.lzma
2018-06-13T03:53:39.570Z,1528862019.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:39.930Z,1528862019.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:40.278Z,1528862020.278 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0013.lzma.bak
2018-06-13T03:53:40.278Z,1528862020.278 [DataOverHttps](INFO): SBD MOMSN=8328523
2018-06-13T03:53:40.344Z,1528862020.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:42.304Z,1528862022.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:42.307Z,1528862022.307 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T03:53:42.307Z,1528862022.307 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T03:53:42.307Z,1528862022.307 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T03:53:42.478Z,1528862022.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:42.884Z,1528862022.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:45.996Z,1528862025.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:46.125Z,1528862026.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:46.539Z,1528862026.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:46.927Z,1528862026.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:47.320Z,1528862027.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:47.721Z,1528862027.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:48.144Z,1528862028.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:48.544Z,1528862028.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:48.946Z,1528862028.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:49.320Z,1528862029.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:49.720Z,1528862029.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:50.122Z,1528862030.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:50.520Z,1528862030.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:50.948Z,1528862030.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:51.331Z,1528862031.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:51.728Z,1528862031.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:52.124Z,1528862032.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:52.524Z,1528862032.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:52.920Z,1528862032.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:53.325Z,1528862033.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:53.730Z,1528862033.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:54.133Z,1528862034.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:54.537Z,1528862034.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:54.944Z,1528862034.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:55.324Z,1528862035.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:55.725Z,1528862035.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:56.127Z,1528862036.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:56.532Z,1528862036.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:56.933Z,1528862036.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:57.340Z,1528862037.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:57.729Z,1528862037.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:58.124Z,1528862038.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:58.527Z,1528862038.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:58.923Z,1528862038.923 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:58.923Z,1528862038.923 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2018-06-13T03:53:58.923Z,1528862038.923 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T03:53:58.925Z,1528862038.925 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:58.926Z,1528862038.926 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-06-13T03:53:58.926Z,1528862038.926 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T03:53:58.927Z,1528862038.927 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:53:58.927Z,1528862038.927 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-06-13T03:53:58.927Z,1528862038.927 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T03:53:59.002Z,1528862039.002 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T03:53:59.002Z,1528862039.002 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T03:53:59.002Z,1528862039.002 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T03:53:59.409Z,1528862039.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T03:53:59.409Z,1528862039.409 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2018-06-13T03:53:59.410Z,1528862039.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T03:53:59.410Z,1528862039.410 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-06-13T03:53:59.410Z,1528862039.410 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T03:53:59.410Z,1528862039.410 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-06-13T03:53:59.726Z,1528862039.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T03:53:59.727Z,1528862039.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:53:59.727Z,1528862039.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:53:59.727Z,1528862039.727 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T03:53:59.728Z,1528862039.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:53:59.728Z,1528862039.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:53:59.728Z,1528862039.728 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T03:53:59.729Z,1528862039.729 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:53:59.729Z,1528862039.729 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:54:00.134Z,1528862040.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T03:54:00.135Z,1528862040.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:00.539Z,1528862040.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T03:54:00.540Z,1528862040.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:00.938Z,1528862040.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T03:54:00.939Z,1528862040.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:01.312Z,1528862041.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T03:54:01.322Z,1528862041.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:01.736Z,1528862041.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T03:54:01.741Z,1528862041.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:02.117Z,1528862042.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T03:54:02.118Z,1528862042.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:02.516Z,1528862042.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T03:54:02.517Z,1528862042.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:02.946Z,1528862042.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T03:54:02.947Z,1528862042.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:03.345Z,1528862043.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T03:54:03.346Z,1528862043.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:03.746Z,1528862043.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T03:54:03.747Z,1528862043.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:04.124Z,1528862044.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T03:54:04.141Z,1528862044.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:04.519Z,1528862044.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T03:54:04.520Z,1528862044.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:04.919Z,1528862044.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T03:54:04.920Z,1528862044.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:05.320Z,1528862045.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T03:54:05.321Z,1528862045.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:05.719Z,1528862045.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T03:54:05.720Z,1528862045.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:06.146Z,1528862046.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T03:54:06.147Z,1528862046.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:06.530Z,1528862046.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T03:54:06.531Z,1528862046.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:06.931Z,1528862046.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T03:54:06.932Z,1528862046.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:07.322Z,1528862047.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T03:54:07.322Z,1528862047.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:07.721Z,1528862047.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T03:54:07.722Z,1528862047.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:08.125Z,1528862048.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T03:54:08.126Z,1528862048.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:08.528Z,1528862048.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T03:54:08.529Z,1528862048.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:08.927Z,1528862048.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T03:54:08.928Z,1528862048.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:09.331Z,1528862049.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T03:54:09.332Z,1528862049.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:09.729Z,1528862049.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T03:54:09.730Z,1528862049.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:10.128Z,1528862050.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T03:54:10.129Z,1528862050.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:10.522Z,1528862050.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T03:54:10.523Z,1528862050.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:10.928Z,1528862050.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T03:54:10.929Z,1528862050.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:11.334Z,1528862051.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T03:54:11.335Z,1528862051.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:11.731Z,1528862051.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T03:54:11.732Z,1528862051.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:12.124Z,1528862052.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T03:54:12.125Z,1528862052.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:12.523Z,1528862052.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T03:54:12.524Z,1528862052.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:12.935Z,1528862052.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T03:54:12.936Z,1528862052.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:13.330Z,1528862053.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T03:54:13.331Z,1528862053.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:13.732Z,1528862053.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T03:54:13.733Z,1528862053.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:14.126Z,1528862054.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T03:54:14.127Z,1528862054.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:14.523Z,1528862054.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T03:54:14.524Z,1528862054.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:14.931Z,1528862054.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T03:54:14.932Z,1528862054.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:15.331Z,1528862055.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T03:54:15.332Z,1528862055.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:15.729Z,1528862055.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T03:54:15.730Z,1528862055.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:16.127Z,1528862056.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T03:54:16.128Z,1528862056.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:16.558Z,1528862056.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T03:54:16.559Z,1528862056.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:16.932Z,1528862056.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T03:54:16.933Z,1528862056.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:17.380Z,1528862057.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T03:54:17.382Z,1528862057.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:17.736Z,1528862057.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T03:54:17.737Z,1528862057.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:18.124Z,1528862058.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T03:54:18.125Z,1528862058.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:18.524Z,1528862058.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T03:54:18.525Z,1528862058.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:18.933Z,1528862058.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:19.333Z,1528862059.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:19.732Z,1528862059.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:20.132Z,1528862060.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:20.522Z,1528862060.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:20.932Z,1528862060.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:21.335Z,1528862061.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:21.798Z,1528862061.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:22.267Z,1528862062.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:22.576Z,1528862062.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:23.040Z,1528862063.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:23.348Z,1528862063.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:23.750Z,1528862063.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:24.147Z,1528862064.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:24.526Z,1528862064.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:24.931Z,1528862064.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:25.331Z,1528862065.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:25.732Z,1528862065.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:26.126Z,1528862066.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:26.523Z,1528862066.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:26.931Z,1528862066.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:27.333Z,1528862067.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:27.731Z,1528862067.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:28.127Z,1528862068.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:28.524Z,1528862068.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:28.936Z,1528862068.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:29.331Z,1528862069.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:29.731Z,1528862069.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:30.127Z,1528862070.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:30.544Z,1528862070.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:30.932Z,1528862070.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:31.331Z,1528862071.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:31.732Z,1528862071.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:32.127Z,1528862072.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:32.539Z,1528862072.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:32.936Z,1528862072.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:33.332Z,1528862073.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:33.734Z,1528862073.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:34.128Z,1528862074.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:34.527Z,1528862074.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:34.936Z,1528862074.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:35.335Z,1528862075.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:35.737Z,1528862075.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:36.126Z,1528862076.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:36.530Z,1528862076.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:36.940Z,1528862076.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:37.335Z,1528862077.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:37.734Z,1528862077.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:38.127Z,1528862078.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:38.544Z,1528862078.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:38.960Z,1528862078.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:39.339Z,1528862079.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:39.736Z,1528862079.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:40.144Z,1528862080.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:40.544Z,1528862080.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:40.935Z,1528862080.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:41.336Z,1528862081.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:41.737Z,1528862081.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:42.128Z,1528862082.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:42.531Z,1528862082.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:42.938Z,1528862082.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:43.336Z,1528862083.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:43.737Z,1528862083.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:44.144Z,1528862084.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:44.526Z,1528862084.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:44.940Z,1528862084.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:45.330Z,1528862085.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:45.726Z,1528862085.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:46.134Z,1528862086.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:49.243Z,1528862089.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:49.422Z,1528862089.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:49.808Z,1528862089.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:50.216Z,1528862090.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:50.593Z,1528862090.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:51.027Z,1528862091.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:51.426Z,1528862091.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:51.833Z,1528862091.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:52.202Z,1528862092.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:52.601Z,1528862092.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:53.001Z,1528862093.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:53.404Z,1528862093.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:53.801Z,1528862093.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:54.208Z,1528862094.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:54.628Z,1528862094.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:55.031Z,1528862095.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:55.404Z,1528862095.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:55.804Z,1528862095.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:56.202Z,1528862096.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:56.598Z,1528862096.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:57.028Z,1528862097.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:57.430Z,1528862097.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:57.828Z,1528862097.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:58.205Z,1528862098.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:58.601Z,1528862098.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:59.004Z,1528862099.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:59.428Z,1528862099.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:54:59.831Z,1528862099.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:00.201Z,1528862100.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:00.602Z,1528862100.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:01.031Z,1528862101.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:01.429Z,1528862101.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:01.832Z,1528862101.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:02.206Z,1528862102.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:02.601Z,1528862102.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:03.032Z,1528862103.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:03.416Z,1528862103.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:03.809Z,1528862103.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:04.206Z,1528862104.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:04.601Z,1528862104.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:05.009Z,1528862105.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:05.413Z,1528862105.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:05.836Z,1528862105.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:06.204Z,1528862106.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:06.605Z,1528862106.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:07.008Z,1528862107.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:07.416Z,1528862107.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:07.812Z,1528862107.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:08.205Z,1528862108.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:08.605Z,1528862108.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:09.012Z,1528862109.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:09.411Z,1528862109.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:09.808Z,1528862109.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:10.205Z,1528862110.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:10.606Z,1528862110.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:11.012Z,1528862111.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:11.416Z,1528862111.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:11.811Z,1528862111.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:12.207Z,1528862112.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:12.606Z,1528862112.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:13.009Z,1528862113.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:13.420Z,1528862113.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:13.816Z,1528862113.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:14.208Z,1528862114.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:14.607Z,1528862114.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:15.012Z,1528862115.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:15.412Z,1528862115.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:15.816Z,1528862115.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:16.205Z,1528862116.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:16.604Z,1528862116.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:17.020Z,1528862117.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:17.412Z,1528862117.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:17.812Z,1528862117.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:18.213Z,1528862118.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:18.617Z,1528862118.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:19.012Z,1528862119.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:19.416Z,1528862119.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:19.816Z,1528862119.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:20.205Z,1528862120.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:20.615Z,1528862120.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:21.017Z,1528862121.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:21.416Z,1528862121.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:21.828Z,1528862121.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:22.207Z,1528862122.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:22.606Z,1528862122.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:23.018Z,1528862123.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:23.437Z,1528862123.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:23.815Z,1528862123.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:24.208Z,1528862124.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:24.608Z,1528862124.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:25.028Z,1528862125.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:25.421Z,1528862125.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:25.818Z,1528862125.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:26.208Z,1528862126.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:26.610Z,1528862126.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:27.016Z,1528862127.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:27.414Z,1528862127.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:27.824Z,1528862127.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:28.215Z,1528862128.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:28.612Z,1528862128.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:29.020Z,1528862129.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:29.421Z,1528862129.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:29.822Z,1528862129.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:30.215Z,1528862130.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:30.612Z,1528862130.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:31.018Z,1528862131.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:31.461Z,1528862131.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:31.819Z,1528862131.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:32.223Z,1528862132.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:32.619Z,1528862132.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:33.032Z,1528862133.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:33.419Z,1528862133.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:33.824Z,1528862133.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:34.219Z,1528862134.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:34.618Z,1528862134.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:35.016Z,1528862135.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:35.424Z,1528862135.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:35.819Z,1528862135.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:36.223Z,1528862136.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:36.620Z,1528862136.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:37.018Z,1528862137.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:37.416Z,1528862137.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:37.824Z,1528862137.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:38.228Z,1528862138.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:38.632Z,1528862138.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:39.016Z,1528862139.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:39.421Z,1528862139.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:39.815Z,1528862139.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:40.218Z,1528862140.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:40.604Z,1528862140.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:41.027Z,1528862141.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:41.429Z,1528862141.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:41.831Z,1528862141.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:42.228Z,1528862142.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:42.636Z,1528862142.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:43.012Z,1528862143.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:46.113Z,1528862146.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:46.289Z,1528862146.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:46.684Z,1528862146.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:47.096Z,1528862147.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:47.487Z,1528862147.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:47.866Z,1528862147.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:48.266Z,1528862148.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:48.668Z,1528862148.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:49.095Z,1528862149.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:49.489Z,1528862149.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:49.899Z,1528862149.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:50.270Z,1528862150.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:50.667Z,1528862150.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:51.096Z,1528862151.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:51.476Z,1528862151.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:51.872Z,1528862151.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:52.271Z,1528862152.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:52.673Z,1528862152.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:53.023Z,1528862153.023 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T03:55:53.023Z,1528862153.023 [NAL9602] Data Fault, FailCount= 3
2018-06-13T03:55:53.023Z,1528862153.023 [NAL9602](ERROR): Data Fault
2018-06-13T03:55:53.089Z,1528862153.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:53.173Z,1528862153.173 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T03:55:53.426Z,1528862153.426 [NAL9602](INFO): Powering down
2018-06-13T03:55:53.473Z,1528862153.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:53.870Z,1528862153.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:54.267Z,1528862154.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:54.345Z,1528862154.345 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T03:55:54.345Z,1528862154.345 [NAL9602] No Fault, FailCount= 3
2018-06-13T03:55:54.666Z,1528862154.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:55.072Z,1528862155.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:55.465Z,1528862155.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:55.867Z,1528862155.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:56.266Z,1528862156.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:56.663Z,1528862156.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:57.070Z,1528862157.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:57.470Z,1528862157.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:57.864Z,1528862157.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:58.268Z,1528862158.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:58.671Z,1528862158.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:59.067Z,1528862159.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:59.470Z,1528862159.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:55:59.867Z,1528862159.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:00.272Z,1528862160.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:00.670Z,1528862160.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:01.070Z,1528862161.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:01.463Z,1528862161.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:01.874Z,1528862161.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:02.270Z,1528862162.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:02.670Z,1528862162.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:03.076Z,1528862163.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:03.470Z,1528862163.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:03.868Z,1528862163.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:04.271Z,1528862164.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:04.676Z,1528862164.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:05.078Z,1528862165.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:05.469Z,1528862165.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:05.868Z,1528862165.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:06.270Z,1528862166.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:06.680Z,1528862166.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:07.076Z,1528862167.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:07.467Z,1528862167.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:07.872Z,1528862167.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:08.280Z,1528862168.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:08.672Z,1528862168.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:09.070Z,1528862169.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:09.476Z,1528862169.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:09.874Z,1528862169.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:10.276Z,1528862170.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:10.672Z,1528862170.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:11.068Z,1528862171.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:11.474Z,1528862171.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:11.880Z,1528862171.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:12.271Z,1528862172.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:12.671Z,1528862172.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:13.086Z,1528862173.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:13.470Z,1528862173.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:13.888Z,1528862173.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:14.273Z,1528862174.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:14.671Z,1528862174.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:15.071Z,1528862175.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:15.480Z,1528862175.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:15.866Z,1528862175.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:16.287Z,1528862176.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:16.680Z,1528862176.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:17.068Z,1528862177.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:17.478Z,1528862177.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:17.885Z,1528862177.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:18.282Z,1528862178.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:18.667Z,1528862178.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:19.066Z,1528862179.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:19.486Z,1528862179.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:19.868Z,1528862179.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:20.292Z,1528862180.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:20.663Z,1528862180.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:21.091Z,1528862181.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:21.489Z,1528862181.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:21.865Z,1528862181.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:22.267Z,1528862182.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:22.690Z,1528862182.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:23.063Z,1528862183.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:23.430Z,1528862183.430 [NAL9602](INFO): Powering up NAL9602
2018-06-13T03:56:23.485Z,1528862183.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:23.867Z,1528862183.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:24.291Z,1528862184.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:24.667Z,1528862184.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:25.070Z,1528862185.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:25.468Z,1528862185.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:25.892Z,1528862185.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:26.297Z,1528862186.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:26.670Z,1528862186.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:27.068Z,1528862187.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:27.497Z,1528862187.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:27.861Z,1528862187.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:28.269Z,1528862188.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:28.676Z,1528862188.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:29.096Z,1528862189.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:29.467Z,1528862189.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:29.873Z,1528862189.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:30.272Z,1528862190.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:30.678Z,1528862190.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:31.067Z,1528862191.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:31.463Z,1528862191.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:31.871Z,1528862191.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:32.266Z,1528862192.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:32.663Z,1528862192.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:33.065Z,1528862193.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:33.471Z,1528862193.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:33.854Z,1528862193.854 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T03:56:33.854Z,1528862193.854 [BPC1] Communications Fault, FailCount= 4
2018-06-13T03:56:33.854Z,1528862193.854 [BPC1](ERROR): Communications Fault
2018-06-13T03:56:33.864Z,1528862193.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:33.945Z,1528862193.945 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T03:56:34.271Z,1528862194.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:34.627Z,1528862194.627 [NAL9602](INFO): NAL9602 initialized
2018-06-13T03:56:34.681Z,1528862194.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:35.067Z,1528862195.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:35.154Z,1528862195.154 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T03:56:35.154Z,1528862195.154 [BPC1] No Fault, FailCount= 4
2018-06-13T03:56:35.542Z,1528862195.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:35.875Z,1528862195.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:36.275Z,1528862196.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:36.690Z,1528862196.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:37.067Z,1528862197.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:37.464Z,1528862197.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:37.867Z,1528862197.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:38.280Z,1528862198.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:38.672Z,1528862198.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:39.080Z,1528862199.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:39.472Z,1528862199.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:39.863Z,1528862199.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:40.269Z,1528862200.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:40.679Z,1528862200.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:41.074Z,1528862201.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:41.487Z,1528862201.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:41.882Z,1528862201.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:42.280Z,1528862202.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:42.672Z,1528862202.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:43.074Z,1528862203.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:46.180Z,1528862206.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:46.324Z,1528862206.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:46.730Z,1528862206.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:47.133Z,1528862207.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:47.536Z,1528862207.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:47.917Z,1528862207.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:48.336Z,1528862208.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:48.722Z,1528862208.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:49.125Z,1528862209.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:49.524Z,1528862209.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:49.936Z,1528862209.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:50.326Z,1528862210.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:50.721Z,1528862210.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:51.125Z,1528862211.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:51.552Z,1528862211.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:51.944Z,1528862211.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:52.326Z,1528862212.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:52.728Z,1528862212.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:53.148Z,1528862213.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:53.544Z,1528862213.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:53.930Z,1528862213.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:54.330Z,1528862214.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:54.731Z,1528862214.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:55.132Z,1528862215.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:55.532Z,1528862215.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:55.934Z,1528862215.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:56.341Z,1528862216.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:56.705Z,1528862216.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:57.136Z,1528862217.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:57.539Z,1528862217.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:57.940Z,1528862217.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:58.308Z,1528862218.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:58.733Z,1528862218.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:59.113Z,1528862219.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:59.537Z,1528862219.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:59.938Z,1528862219.938 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:59.938Z,1528862219.938 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2018-06-13T03:56:59.938Z,1528862219.938 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T03:56:59.940Z,1528862219.940 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:59.940Z,1528862219.940 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-06-13T03:56:59.940Z,1528862219.940 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T03:56:59.946Z,1528862219.946 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:56:59.946Z,1528862219.946 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-06-13T03:56:59.946Z,1528862219.946 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T03:57:00.033Z,1528862220.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T03:57:00.033Z,1528862220.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T03:57:00.033Z,1528862220.033 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T03:57:00.397Z,1528862220.397 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T03:57:00.397Z,1528862220.397 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2018-06-13T03:57:00.398Z,1528862220.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T03:57:00.398Z,1528862220.398 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-06-13T03:57:00.398Z,1528862220.398 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T03:57:00.398Z,1528862220.398 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-06-13T03:57:00.721Z,1528862220.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T03:57:00.722Z,1528862220.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:57:00.722Z,1528862220.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:57:00.722Z,1528862220.722 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T03:57:00.723Z,1528862220.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:57:00.723Z,1528862220.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:57:00.723Z,1528862220.723 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T03:57:00.724Z,1528862220.724 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T03:57:00.724Z,1528862220.724 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T03:57:01.124Z,1528862221.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T03:57:01.130Z,1528862221.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:01.512Z,1528862221.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T03:57:01.513Z,1528862221.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:01.921Z,1528862221.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T03:57:01.922Z,1528862221.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:02.325Z,1528862222.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T03:57:02.326Z,1528862222.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:02.755Z,1528862222.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T03:57:02.756Z,1528862222.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:03.122Z,1528862223.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T03:57:03.124Z,1528862223.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:03.530Z,1528862223.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T03:57:03.531Z,1528862223.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:03.923Z,1528862223.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T03:57:03.923Z,1528862223.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:04.312Z,1528862224.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T03:57:04.313Z,1528862224.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:04.715Z,1528862224.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T03:57:04.716Z,1528862224.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:05.122Z,1528862225.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T03:57:05.124Z,1528862225.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:05.525Z,1528862225.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T03:57:05.526Z,1528862225.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:05.961Z,1528862225.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T03:57:05.962Z,1528862225.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:06.325Z,1528862226.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T03:57:06.327Z,1528862226.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:06.712Z,1528862226.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T03:57:06.714Z,1528862226.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:07.119Z,1528862227.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T03:57:07.120Z,1528862227.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:07.518Z,1528862227.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T03:57:07.519Z,1528862227.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:07.913Z,1528862227.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T03:57:07.914Z,1528862227.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:08.323Z,1528862228.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T03:57:08.325Z,1528862228.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:08.727Z,1528862228.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T03:57:08.728Z,1528862228.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:09.126Z,1528862229.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T03:57:09.127Z,1528862229.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:09.521Z,1528862229.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T03:57:09.522Z,1528862229.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:09.909Z,1528862229.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T03:57:09.910Z,1528862229.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:10.334Z,1528862230.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T03:57:10.335Z,1528862230.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:10.701Z,1528862230.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T03:57:10.702Z,1528862230.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:11.105Z,1528862231.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T03:57:11.106Z,1528862231.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:11.542Z,1528862231.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T03:57:11.543Z,1528862231.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:11.938Z,1528862231.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T03:57:11.939Z,1528862231.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:12.330Z,1528862232.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T03:57:12.331Z,1528862232.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:12.709Z,1528862232.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T03:57:12.710Z,1528862232.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:13.107Z,1528862233.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T03:57:13.108Z,1528862233.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:13.508Z,1528862233.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T03:57:13.509Z,1528862233.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:13.907Z,1528862233.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T03:57:13.908Z,1528862233.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:14.314Z,1528862234.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T03:57:14.315Z,1528862234.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:14.715Z,1528862234.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T03:57:14.715Z,1528862234.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:15.120Z,1528862235.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T03:57:15.123Z,1528862235.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:15.510Z,1528862235.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T03:57:15.511Z,1528862235.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:15.907Z,1528862235.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T03:57:15.908Z,1528862235.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:16.312Z,1528862236.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T03:57:16.313Z,1528862236.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:16.709Z,1528862236.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T03:57:16.710Z,1528862236.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:17.106Z,1528862237.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T03:57:17.107Z,1528862237.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:17.520Z,1528862237.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T03:57:17.521Z,1528862237.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:17.919Z,1528862237.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T03:57:17.920Z,1528862237.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:18.320Z,1528862238.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T03:57:18.321Z,1528862238.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:18.711Z,1528862238.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T03:57:18.712Z,1528862238.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:19.112Z,1528862239.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T03:57:19.112Z,1528862239.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:19.508Z,1528862239.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T03:57:19.509Z,1528862239.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:19.912Z,1528862239.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T03:57:19.913Z,1528862239.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:20.328Z,1528862240.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:20.720Z,1528862240.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:21.121Z,1528862241.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:21.512Z,1528862241.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:21.908Z,1528862241.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:22.316Z,1528862242.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:22.712Z,1528862242.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:23.113Z,1528862243.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:23.520Z,1528862243.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:23.924Z,1528862243.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:24.321Z,1528862244.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:24.722Z,1528862244.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:25.112Z,1528862245.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:25.512Z,1528862245.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:25.913Z,1528862245.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:26.324Z,1528862246.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:26.721Z,1528862246.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:27.125Z,1528862247.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:27.512Z,1528862247.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:27.912Z,1528862247.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:28.325Z,1528862248.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:28.712Z,1528862248.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:29.118Z,1528862249.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:29.524Z,1528862249.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:29.924Z,1528862249.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:30.324Z,1528862250.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:30.712Z,1528862250.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:31.120Z,1528862251.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:31.512Z,1528862251.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:31.922Z,1528862251.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:32.324Z,1528862252.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:32.728Z,1528862252.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:33.124Z,1528862253.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:33.522Z,1528862253.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:33.913Z,1528862253.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:34.310Z,1528862254.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:34.712Z,1528862254.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:35.111Z,1528862255.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:35.519Z,1528862255.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:35.928Z,1528862255.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:36.359Z,1528862256.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:36.714Z,1528862256.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:37.111Z,1528862257.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:37.515Z,1528862257.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:37.912Z,1528862257.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:38.328Z,1528862258.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:38.726Z,1528862258.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:39.128Z,1528862259.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:39.515Z,1528862259.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:39.910Z,1528862259.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:40.310Z,1528862260.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:40.722Z,1528862260.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:41.120Z,1528862261.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:41.525Z,1528862261.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:41.925Z,1528862261.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:42.332Z,1528862262.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:42.732Z,1528862262.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:43.120Z,1528862263.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:46.235Z,1528862266.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:46.411Z,1528862266.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:46.813Z,1528862266.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:47.217Z,1528862267.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:47.619Z,1528862267.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:48.016Z,1528862268.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:48.380Z,1528862268.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:48.786Z,1528862268.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:49.180Z,1528862269.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:49.591Z,1528862269.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:49.996Z,1528862269.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:50.392Z,1528862270.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:50.783Z,1528862270.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:51.182Z,1528862271.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:51.593Z,1528862271.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:51.988Z,1528862271.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:52.391Z,1528862272.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:52.815Z,1528862272.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:53.195Z,1528862273.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:53.584Z,1528862273.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:53.985Z,1528862273.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:54.386Z,1528862274.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:54.786Z,1528862274.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:55.217Z,1528862275.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:55.594Z,1528862275.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:55.996Z,1528862275.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:56.400Z,1528862276.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:56.786Z,1528862276.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:57.185Z,1528862277.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:57.594Z,1528862277.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:57.985Z,1528862277.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:58.400Z,1528862278.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:58.798Z,1528862278.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:59.200Z,1528862279.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:59.610Z,1528862279.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:57:59.986Z,1528862279.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:00.387Z,1528862280.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:00.785Z,1528862280.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:01.187Z,1528862281.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:01.597Z,1528862281.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:01.997Z,1528862281.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:02.393Z,1528862282.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:02.784Z,1528862282.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:03.194Z,1528862283.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:03.599Z,1528862283.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:03.993Z,1528862283.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:04.408Z,1528862284.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:04.806Z,1528862284.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:05.204Z,1528862285.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:05.580Z,1528862285.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:05.984Z,1528862285.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:06.379Z,1528862286.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:06.792Z,1528862286.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:07.182Z,1528862287.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:07.587Z,1528862287.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:08.007Z,1528862288.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:08.420Z,1528862288.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:08.780Z,1528862288.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:09.193Z,1528862289.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:09.596Z,1528862289.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:09.988Z,1528862289.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:10.392Z,1528862290.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:10.798Z,1528862290.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:11.228Z,1528862291.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:11.583Z,1528862291.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:11.983Z,1528862291.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:12.379Z,1528862292.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:12.788Z,1528862292.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:13.183Z,1528862293.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:13.591Z,1528862293.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:13.996Z,1528862293.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:14.393Z,1528862294.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:14.782Z,1528862294.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:15.182Z,1528862295.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:15.584Z,1528862295.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:15.981Z,1528862295.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:16.396Z,1528862296.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:16.798Z,1528862296.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:17.194Z,1528862297.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:17.596Z,1528862297.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:17.986Z,1528862297.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:18.385Z,1528862298.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:18.785Z,1528862298.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:19.186Z,1528862299.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:19.598Z,1528862299.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:19.997Z,1528862299.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:20.393Z,1528862300.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:20.808Z,1528862300.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:21.196Z,1528862301.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:21.597Z,1528862301.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:22.008Z,1528862302.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:22.412Z,1528862302.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:22.801Z,1528862302.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:23.195Z,1528862303.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:23.593Z,1528862303.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:23.997Z,1528862303.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:24.373Z,1528862304.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:24.777Z,1528862304.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:25.176Z,1528862305.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:25.595Z,1528862305.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:26.003Z,1528862306.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:26.407Z,1528862306.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:26.780Z,1528862306.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:27.184Z,1528862307.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:27.588Z,1528862307.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:27.980Z,1528862307.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:28.414Z,1528862308.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:28.792Z,1528862308.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:29.191Z,1528862309.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:29.582Z,1528862309.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:29.983Z,1528862309.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:30.380Z,1528862310.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:30.784Z,1528862310.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:31.186Z,1528862311.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:31.587Z,1528862311.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:31.991Z,1528862311.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:32.388Z,1528862312.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:32.783Z,1528862312.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:33.188Z,1528862313.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:33.631Z,1528862313.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:34.004Z,1528862314.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:34.391Z,1528862314.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:34.797Z,1528862314.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:35.198Z,1528862315.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:35.585Z,1528862315.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:35.984Z,1528862315.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:36.384Z,1528862316.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:36.785Z,1528862316.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:37.183Z,1528862317.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:37.594Z,1528862317.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:38.000Z,1528862318.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:38.393Z,1528862318.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:38.789Z,1528862318.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:39.184Z,1528862319.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:39.595Z,1528862319.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:39.991Z,1528862319.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:40.393Z,1528862320.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:40.798Z,1528862320.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:41.193Z,1528862321.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:41.585Z,1528862321.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:41.987Z,1528862321.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:42.386Z,1528862322.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:42.796Z,1528862322.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:42.799Z,1528862322.799 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T03:58:42.799Z,1528862322.799 [Default:CheckIn:C.Wait] Stopped
2018-06-13T03:58:42.799Z,1528862322.799 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T03:58:42.799Z,1528862322.799 [Default:CheckIn:D] Running Loop=1
2018-06-13T03:58:43.197Z,1528862323.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:43.200Z,1528862323.200 [Default:CheckIn:D] Stopped
2018-06-13T03:58:43.200Z,1528862323.200 [Default:CheckIn:E] Running Loop=1
2018-06-13T03:58:46.358Z,1528862326.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:46.362Z,1528862326.362 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.495921 min 
2018-06-13T03:58:46.362Z,1528862326.362 [Default:CheckIn:E] Stopped
2018-06-13T03:58:46.362Z,1528862326.362 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T03:58:46.362Z,1528862326.362 [Default:CheckIn] Stopped
2018-06-13T03:58:46.362Z,1528862326.362 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T03:58:46.363Z,1528862326.363 [Default:CheckIn](INFO): Running loop #4
2018-06-13T03:58:46.363Z,1528862326.363 [Default:CheckIn] Running Loop=4
2018-06-13T03:58:46.363Z,1528862326.363 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T03:58:46.363Z,1528862326.363 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T03:58:46.567Z,1528862326.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:46.932Z,1528862326.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:47.309Z,1528862327.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:47.702Z,1528862327.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:48.112Z,1528862328.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:48.525Z,1528862328.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:48.947Z,1528862328.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:49.310Z,1528862329.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:49.701Z,1528862329.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:50.111Z,1528862330.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:50.500Z,1528862330.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:50.913Z,1528862330.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:51.316Z,1528862331.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:51.716Z,1528862331.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:52.118Z,1528862332.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:52.516Z,1528862332.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:52.910Z,1528862332.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:53.324Z,1528862333.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:53.719Z,1528862333.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:54.118Z,1528862334.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:54.518Z,1528862334.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:54.923Z,1528862334.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:55.327Z,1528862335.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:55.725Z,1528862335.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:56.102Z,1528862336.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:56.526Z,1528862336.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:56.894Z,1528862336.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:57.344Z,1528862337.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:57.732Z,1528862337.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:58.132Z,1528862338.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:58.502Z,1528862338.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:58.901Z,1528862338.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:59.299Z,1528862339.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:58:59.704Z,1528862339.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:00.106Z,1528862340.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:00.506Z,1528862340.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:00.902Z,1528862340.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:01.303Z,1528862341.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:01.693Z,1528862341.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:02.096Z,1528862342.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:02.504Z,1528862342.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:02.900Z,1528862342.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:03.303Z,1528862343.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:03.718Z,1528862343.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:04.099Z,1528862344.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:04.495Z,1528862344.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:04.901Z,1528862344.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:05.309Z,1528862345.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:05.714Z,1528862345.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:06.142Z,1528862346.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:06.506Z,1528862346.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:06.896Z,1528862346.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:07.303Z,1528862347.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:07.702Z,1528862347.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:08.097Z,1528862348.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:08.510Z,1528862348.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:08.916Z,1528862348.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:09.324Z,1528862349.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:09.698Z,1528862349.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:10.097Z,1528862350.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:10.497Z,1528862350.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:10.913Z,1528862350.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:11.306Z,1528862351.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:11.704Z,1528862351.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:12.114Z,1528862352.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:12.506Z,1528862352.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:12.896Z,1528862352.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:13.299Z,1528862353.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:13.698Z,1528862353.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:14.100Z,1528862354.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:14.506Z,1528862354.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:14.909Z,1528862354.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:15.315Z,1528862355.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:15.707Z,1528862355.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:16.097Z,1528862356.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:16.506Z,1528862356.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:16.902Z,1528862356.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:17.288Z,1528862357.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:17.711Z,1528862357.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:18.120Z,1528862358.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:18.514Z,1528862358.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:18.888Z,1528862358.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:19.312Z,1528862359.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:19.689Z,1528862359.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:20.123Z,1528862360.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:20.524Z,1528862360.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:20.904Z,1528862360.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:21.328Z,1528862361.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:21.694Z,1528862361.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:22.093Z,1528862362.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:22.494Z,1528862362.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:22.895Z,1528862362.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:23.292Z,1528862363.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:23.708Z,1528862363.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:24.100Z,1528862364.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:24.505Z,1528862364.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:24.898Z,1528862364.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:25.300Z,1528862365.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:25.692Z,1528862365.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:26.096Z,1528862366.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:26.505Z,1528862366.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:26.907Z,1528862366.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:27.305Z,1528862367.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:27.703Z,1528862367.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:28.098Z,1528862368.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:28.502Z,1528862368.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:28.899Z,1528862368.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:29.302Z,1528862369.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:29.709Z,1528862369.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:30.108Z,1528862370.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:30.515Z,1528862370.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:30.908Z,1528862370.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:31.310Z,1528862371.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:31.706Z,1528862371.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:32.112Z,1528862372.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:32.527Z,1528862372.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:32.918Z,1528862372.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:33.319Z,1528862373.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:33.691Z,1528862373.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:34.091Z,1528862374.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:34.500Z,1528862374.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:34.896Z,1528862374.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:35.294Z,1528862375.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:35.729Z,1528862375.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:36.102Z,1528862376.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:36.504Z,1528862376.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:36.894Z,1528862376.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:37.294Z,1528862377.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:37.695Z,1528862377.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:38.103Z,1528862378.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:38.500Z,1528862378.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:38.903Z,1528862378.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:39.300Z,1528862379.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:39.694Z,1528862379.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:40.095Z,1528862380.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:40.493Z,1528862380.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:40.894Z,1528862380.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:41.295Z,1528862381.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:41.703Z,1528862381.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:42.102Z,1528862382.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:42.503Z,1528862382.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:42.900Z,1528862382.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:43.298Z,1528862383.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:46.431Z,1528862386.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:46.605Z,1528862386.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:46.991Z,1528862386.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:47.394Z,1528862387.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:47.804Z,1528862387.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:48.187Z,1528862388.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:48.581Z,1528862388.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:48.993Z,1528862388.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:49.369Z,1528862389.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:49.802Z,1528862389.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:50.198Z,1528862390.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:50.598Z,1528862390.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:50.996Z,1528862390.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:51.370Z,1528862391.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:51.767Z,1528862391.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:52.173Z,1528862392.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:52.631Z,1528862392.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:52.979Z,1528862392.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:53.401Z,1528862393.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:53.776Z,1528862393.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:54.173Z,1528862394.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:54.576Z,1528862394.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:54.973Z,1528862394.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:55.398Z,1528862395.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:55.786Z,1528862395.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:56.185Z,1528862396.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:56.584Z,1528862396.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:56.989Z,1528862396.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:57.364Z,1528862397.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:57.788Z,1528862397.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:58.166Z,1528862398.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:58.601Z,1528862398.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:58.979Z,1528862398.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:59.379Z,1528862399.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T03:59:59.771Z,1528862399.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:00.173Z,1528862400.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:00.571Z,1528862400.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:00.982Z,1528862400.982 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:00.982Z,1528862400.982 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2018-06-13T04:00:00.982Z,1528862400.982 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:00:00.984Z,1528862400.984 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:00.984Z,1528862400.984 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-06-13T04:00:00.984Z,1528862400.984 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:00:00.990Z,1528862400.990 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:00.990Z,1528862400.990 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-06-13T04:00:00.990Z,1528862400.990 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:00:01.081Z,1528862401.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:00:01.081Z,1528862401.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:00:01.081Z,1528862401.081 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:00:01.461Z,1528862401.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:00:01.461Z,1528862401.461 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2018-06-13T04:00:01.461Z,1528862401.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:00:01.462Z,1528862401.462 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-06-13T04:00:01.462Z,1528862401.462 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:00:01.462Z,1528862401.462 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-06-13T04:00:01.792Z,1528862401.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:00:01.792Z,1528862401.792 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:00:01.793Z,1528862401.793 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:00:01.793Z,1528862401.793 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:00:01.794Z,1528862401.794 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:00:01.794Z,1528862401.794 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:00:01.794Z,1528862401.794 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:00:01.795Z,1528862401.795 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:00:01.795Z,1528862401.795 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:00:02.184Z,1528862402.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:00:02.185Z,1528862402.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:02.581Z,1528862402.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:00:02.582Z,1528862402.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:02.976Z,1528862402.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:00:02.982Z,1528862402.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:03.364Z,1528862403.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:00:03.377Z,1528862403.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:03.788Z,1528862403.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:00:03.793Z,1528862403.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:04.168Z,1528862404.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:00:04.169Z,1528862404.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:04.596Z,1528862404.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:00:04.602Z,1528862404.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:05.008Z,1528862405.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:00:05.013Z,1528862405.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:05.379Z,1528862405.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:00:05.380Z,1528862405.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:05.776Z,1528862405.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:00:05.776Z,1528862405.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:06.168Z,1528862406.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:00:06.169Z,1528862406.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:06.579Z,1528862406.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:00:06.580Z,1528862406.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:06.974Z,1528862406.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:00:06.975Z,1528862406.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:07.380Z,1528862407.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:00:07.381Z,1528862407.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:07.783Z,1528862407.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:00:07.784Z,1528862407.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:08.186Z,1528862408.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:00:08.187Z,1528862408.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:08.591Z,1528862408.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:00:08.592Z,1528862408.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:08.970Z,1528862408.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:00:08.971Z,1528862408.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:09.368Z,1528862409.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:00:09.369Z,1528862409.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:09.780Z,1528862409.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:00:09.781Z,1528862409.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:10.170Z,1528862410.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:00:10.170Z,1528862410.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:10.581Z,1528862410.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:00:10.582Z,1528862410.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:10.984Z,1528862410.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:00:10.986Z,1528862410.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:11.386Z,1528862411.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:00:11.387Z,1528862411.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:11.772Z,1528862411.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:00:11.773Z,1528862411.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:12.183Z,1528862412.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:00:12.184Z,1528862412.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:12.579Z,1528862412.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:00:12.580Z,1528862412.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:12.972Z,1528862412.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:00:12.974Z,1528862412.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:13.383Z,1528862413.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:00:13.384Z,1528862413.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:13.781Z,1528862413.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:00:13.782Z,1528862413.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:14.184Z,1528862414.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:00:14.185Z,1528862414.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:14.582Z,1528862414.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:00:14.583Z,1528862414.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:14.972Z,1528862414.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:00:14.978Z,1528862414.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:15.383Z,1528862415.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:00:15.384Z,1528862415.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:15.783Z,1528862415.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:00:15.784Z,1528862415.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:16.172Z,1528862416.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:00:16.177Z,1528862416.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:16.583Z,1528862416.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:00:16.584Z,1528862416.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:16.985Z,1528862416.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:00:16.986Z,1528862416.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:17.390Z,1528862417.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:00:17.391Z,1528862417.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:17.764Z,1528862417.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:00:17.773Z,1528862417.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:18.164Z,1528862418.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:00:18.166Z,1528862418.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:18.564Z,1528862418.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:00:18.566Z,1528862418.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:18.968Z,1528862418.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:00:18.969Z,1528862418.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:19.369Z,1528862419.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:00:19.370Z,1528862419.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:19.774Z,1528862419.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:00:19.775Z,1528862419.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:20.199Z,1528862420.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:00:20.200Z,1528862420.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:20.575Z,1528862420.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:00:20.576Z,1528862420.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:20.967Z,1528862420.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T04:00:20.968Z,1528862420.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:21.375Z,1528862421.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:21.774Z,1528862421.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:22.174Z,1528862422.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:22.581Z,1528862422.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:22.985Z,1528862422.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:23.383Z,1528862423.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:23.780Z,1528862423.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:24.190Z,1528862424.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:24.579Z,1528862424.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:24.973Z,1528862424.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:25.374Z,1528862425.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:25.786Z,1528862425.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:26.186Z,1528862426.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:26.582Z,1528862426.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:26.977Z,1528862426.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:27.386Z,1528862427.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:27.786Z,1528862427.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:28.181Z,1528862428.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:28.590Z,1528862428.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:28.989Z,1528862428.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:29.387Z,1528862429.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:29.764Z,1528862429.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:30.182Z,1528862430.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:30.567Z,1528862430.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:30.976Z,1528862430.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:31.375Z,1528862431.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:31.779Z,1528862431.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:32.178Z,1528862432.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:32.575Z,1528862432.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:32.967Z,1528862432.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:33.369Z,1528862433.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:33.771Z,1528862433.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:34.167Z,1528862434.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:34.575Z,1528862434.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:34.979Z,1528862434.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:35.379Z,1528862435.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:35.776Z,1528862435.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:36.176Z,1528862436.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:36.568Z,1528862436.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:36.970Z,1528862436.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:37.376Z,1528862437.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:37.776Z,1528862437.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:38.182Z,1528862438.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:38.579Z,1528862438.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:38.967Z,1528862438.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:39.370Z,1528862439.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:39.770Z,1528862439.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:40.167Z,1528862440.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:40.576Z,1528862440.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:40.979Z,1528862440.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:41.375Z,1528862441.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:41.770Z,1528862441.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:42.170Z,1528862442.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:42.568Z,1528862442.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:42.976Z,1528862442.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:43.371Z,1528862443.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:43.779Z,1528862443.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:44.182Z,1528862444.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:44.583Z,1528862444.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:47.677Z,1528862447.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:47.836Z,1528862447.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:48.226Z,1528862448.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:48.628Z,1528862448.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:49.026Z,1528862449.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:49.417Z,1528862449.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:49.820Z,1528862449.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:50.228Z,1528862450.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:50.623Z,1528862450.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:51.024Z,1528862451.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:51.427Z,1528862451.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:51.824Z,1528862451.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:52.211Z,1528862452.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:52.617Z,1528862452.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:53.015Z,1528862453.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:53.414Z,1528862453.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:53.826Z,1528862453.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:54.227Z,1528862454.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:54.622Z,1528862454.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:55.020Z,1528862455.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:55.420Z,1528862455.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:55.810Z,1528862455.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:56.216Z,1528862456.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:56.628Z,1528862456.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:57.024Z,1528862457.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:57.421Z,1528862457.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:57.824Z,1528862457.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:58.210Z,1528862458.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:58.620Z,1528862458.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:59.015Z,1528862459.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:59.410Z,1528862459.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:00:59.824Z,1528862459.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:00.227Z,1528862460.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:00.622Z,1528862460.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:01.014Z,1528862461.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:01.415Z,1528862461.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:01.819Z,1528862461.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:02.213Z,1528862462.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:02.622Z,1528862462.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:03.023Z,1528862463.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:03.422Z,1528862463.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:03.820Z,1528862463.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:04.216Z,1528862464.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:04.613Z,1528862464.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:05.020Z,1528862465.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:05.420Z,1528862465.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:05.832Z,1528862465.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:06.227Z,1528862466.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:06.623Z,1528862466.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:07.014Z,1528862467.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:07.420Z,1528862467.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:07.821Z,1528862467.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:08.214Z,1528862468.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:08.627Z,1528862468.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:09.023Z,1528862469.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:09.422Z,1528862469.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:09.816Z,1528862469.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:10.215Z,1528862470.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:10.623Z,1528862470.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:11.021Z,1528862471.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:11.414Z,1528862471.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:11.826Z,1528862471.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:12.226Z,1528862472.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:12.624Z,1528862472.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:13.020Z,1528862473.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:13.415Z,1528862473.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:13.815Z,1528862473.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:14.218Z,1528862474.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:14.623Z,1528862474.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:15.022Z,1528862475.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:15.422Z,1528862475.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:15.825Z,1528862475.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:16.209Z,1528862476.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:16.604Z,1528862476.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:17.006Z,1528862477.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:17.406Z,1528862477.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:17.835Z,1528862477.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:18.235Z,1528862478.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:18.615Z,1528862478.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:19.008Z,1528862479.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:19.408Z,1528862479.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:19.807Z,1528862479.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:20.216Z,1528862480.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:20.644Z,1528862480.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:21.019Z,1528862481.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:21.415Z,1528862481.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:21.809Z,1528862481.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:22.208Z,1528862482.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:22.616Z,1528862482.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:23.020Z,1528862483.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:23.407Z,1528862483.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:23.819Z,1528862483.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:24.221Z,1528862484.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:24.617Z,1528862484.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:25.020Z,1528862485.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:25.416Z,1528862485.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:25.807Z,1528862485.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:26.219Z,1528862486.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:26.617Z,1528862486.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:27.018Z,1528862487.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:27.420Z,1528862487.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:27.813Z,1528862487.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:28.209Z,1528862488.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:28.620Z,1528862488.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:29.013Z,1528862489.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:29.408Z,1528862489.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:29.817Z,1528862489.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:30.220Z,1528862490.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:30.617Z,1528862490.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:31.013Z,1528862491.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:31.410Z,1528862491.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:31.809Z,1528862491.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:32.216Z,1528862492.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:32.624Z,1528862492.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:33.021Z,1528862493.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:33.420Z,1528862493.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:33.812Z,1528862493.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:34.212Z,1528862494.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:34.618Z,1528862494.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:35.011Z,1528862495.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:35.412Z,1528862495.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:35.820Z,1528862495.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:36.224Z,1528862496.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:36.628Z,1528862496.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:37.011Z,1528862497.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:37.410Z,1528862497.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:37.809Z,1528862497.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:38.216Z,1528862498.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:38.628Z,1528862498.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:39.020Z,1528862499.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:39.424Z,1528862499.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:39.822Z,1528862499.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:40.212Z,1528862500.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:40.614Z,1528862500.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:41.011Z,1528862501.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:41.413Z,1528862501.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:41.821Z,1528862501.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:42.224Z,1528862502.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:42.621Z,1528862502.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:43.023Z,1528862503.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:43.420Z,1528862503.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:46.528Z,1528862506.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:46.708Z,1528862506.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:47.102Z,1528862507.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:47.505Z,1528862507.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:47.900Z,1528862507.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:48.280Z,1528862508.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:48.676Z,1528862508.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:49.092Z,1528862509.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:49.508Z,1528862509.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:49.903Z,1528862509.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:50.308Z,1528862510.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:50.710Z,1528862510.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:51.076Z,1528862511.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:51.485Z,1528862511.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:51.881Z,1528862511.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:52.281Z,1528862512.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:52.707Z,1528862512.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:53.091Z,1528862513.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:53.490Z,1528862513.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:53.885Z,1528862513.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:54.286Z,1528862514.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:54.684Z,1528862514.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:55.084Z,1528862515.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:55.483Z,1528862515.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:55.891Z,1528862515.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:56.292Z,1528862516.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:56.687Z,1528862516.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:57.085Z,1528862517.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:57.483Z,1528862517.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:57.883Z,1528862517.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:58.284Z,1528862518.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:58.692Z,1528862518.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:59.096Z,1528862519.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:59.491Z,1528862519.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:01:59.883Z,1528862519.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:00.282Z,1528862520.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:00.684Z,1528862520.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:01.086Z,1528862521.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:01.483Z,1528862521.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:01.891Z,1528862521.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:02.291Z,1528862522.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:02.692Z,1528862522.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:03.085Z,1528862523.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:03.483Z,1528862523.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:03.884Z,1528862523.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:04.284Z,1528862524.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:04.692Z,1528862524.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:05.092Z,1528862525.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:05.491Z,1528862525.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:05.879Z,1528862525.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:06.294Z,1528862526.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:06.685Z,1528862526.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:07.083Z,1528862527.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:07.494Z,1528862527.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:07.892Z,1528862527.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:08.291Z,1528862528.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:08.688Z,1528862528.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:09.084Z,1528862529.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:09.484Z,1528862529.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:09.885Z,1528862529.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:10.284Z,1528862530.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:10.691Z,1528862530.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:11.095Z,1528862531.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:11.491Z,1528862531.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:11.883Z,1528862531.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:12.295Z,1528862532.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:12.685Z,1528862532.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:13.084Z,1528862533.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:13.488Z,1528862533.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:13.896Z,1528862533.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:14.290Z,1528862534.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:14.697Z,1528862534.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:15.084Z,1528862535.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:15.482Z,1528862535.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:15.896Z,1528862535.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:16.282Z,1528862536.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:16.693Z,1528862536.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:17.096Z,1528862537.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:17.494Z,1528862537.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:17.884Z,1528862537.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:18.285Z,1528862538.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:18.681Z,1528862538.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:19.083Z,1528862539.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:19.482Z,1528862539.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:19.893Z,1528862539.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:20.296Z,1528862540.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:20.700Z,1528862540.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:21.081Z,1528862541.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:21.485Z,1528862541.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:21.892Z,1528862541.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:22.285Z,1528862542.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:22.704Z,1528862542.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:23.098Z,1528862543.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:23.492Z,1528862543.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:23.884Z,1528862543.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:24.294Z,1528862544.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:24.685Z,1528862544.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:25.093Z,1528862545.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:25.489Z,1528862545.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:25.895Z,1528862545.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:26.303Z,1528862546.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:26.704Z,1528862546.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:27.081Z,1528862547.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:27.481Z,1528862547.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:27.904Z,1528862547.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:28.280Z,1528862548.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:28.707Z,1528862548.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:29.111Z,1528862549.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:29.510Z,1528862549.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:29.881Z,1528862549.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:30.284Z,1528862550.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:30.680Z,1528862550.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:31.082Z,1528862551.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:31.481Z,1528862551.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:31.887Z,1528862551.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:32.311Z,1528862552.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:32.688Z,1528862552.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:33.081Z,1528862553.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:33.482Z,1528862553.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:33.892Z,1528862553.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:34.282Z,1528862554.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:34.688Z,1528862554.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:35.092Z,1528862555.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:35.492Z,1528862555.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:35.887Z,1528862555.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:36.282Z,1528862556.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:36.687Z,1528862556.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:37.091Z,1528862557.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:37.487Z,1528862557.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:37.880Z,1528862557.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:38.281Z,1528862558.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:38.687Z,1528862558.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:39.087Z,1528862559.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:39.487Z,1528862559.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:39.882Z,1528862559.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:40.279Z,1528862560.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:40.691Z,1528862560.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:41.091Z,1528862561.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:41.487Z,1528862561.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:41.882Z,1528862561.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:42.288Z,1528862562.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:42.688Z,1528862562.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:43.095Z,1528862563.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:43.487Z,1528862563.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:43.883Z,1528862563.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:44.281Z,1528862564.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:44.688Z,1528862564.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:45.090Z,1528862565.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:45.491Z,1528862565.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:45.882Z,1528862565.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:46.282Z,1528862566.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:46.695Z,1528862566.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:49.819Z,1528862569.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:50.012Z,1528862570.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:50.368Z,1528862570.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:50.772Z,1528862570.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:51.166Z,1528862571.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:51.564Z,1528862571.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:51.978Z,1528862571.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:52.374Z,1528862572.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:52.774Z,1528862572.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:53.173Z,1528862573.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:53.568Z,1528862573.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:53.973Z,1528862573.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:54.373Z,1528862574.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:54.787Z,1528862574.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:55.179Z,1528862575.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:55.582Z,1528862575.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:55.956Z,1528862575.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:56.358Z,1528862576.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:56.789Z,1528862576.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:57.162Z,1528862577.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:57.584Z,1528862577.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:57.987Z,1528862577.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:58.367Z,1528862578.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:58.771Z,1528862578.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:59.161Z,1528862579.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:59.568Z,1528862579.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:02:59.970Z,1528862579.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:00.376Z,1528862580.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:00.772Z,1528862580.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:01.176Z,1528862581.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:01.574Z,1528862581.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:01.971Z,1528862581.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:01.971Z,1528862581.971 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2018-06-13T04:03:01.971Z,1528862581.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:03:01.973Z,1528862581.973 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:01.973Z,1528862581.973 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-06-13T04:03:01.973Z,1528862581.973 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:03:01.975Z,1528862581.975 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:01.975Z,1528862581.975 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-06-13T04:03:01.975Z,1528862581.975 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:03:02.049Z,1528862582.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:03:02.049Z,1528862582.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:03:02.050Z,1528862582.050 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:03:02.461Z,1528862582.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:03:02.461Z,1528862582.461 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2018-06-13T04:03:02.462Z,1528862582.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:03:02.462Z,1528862582.462 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-06-13T04:03:02.462Z,1528862582.462 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:03:02.462Z,1528862582.462 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-06-13T04:03:02.780Z,1528862582.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:03:02.781Z,1528862582.781 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:03:02.781Z,1528862582.781 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:03:02.782Z,1528862582.782 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:03:02.782Z,1528862582.782 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:03:02.782Z,1528862582.782 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:03:02.783Z,1528862582.783 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:03:02.783Z,1528862582.783 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:03:02.783Z,1528862582.783 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:03:03.175Z,1528862583.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:03:03.176Z,1528862583.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:03.576Z,1528862583.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:03:03.577Z,1528862583.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:03.988Z,1528862583.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:03:03.989Z,1528862583.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:04.380Z,1528862584.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:03:04.382Z,1528862584.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:04.782Z,1528862584.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:03:04.783Z,1528862584.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:05.157Z,1528862585.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:03:05.158Z,1528862585.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:05.556Z,1528862585.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:03:05.557Z,1528862585.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:05.960Z,1528862585.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:03:05.961Z,1528862585.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:06.360Z,1528862586.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:03:06.362Z,1528862586.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:06.788Z,1528862586.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:03:06.793Z,1528862586.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:07.190Z,1528862587.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:03:07.191Z,1528862587.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:07.571Z,1528862587.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:03:07.572Z,1528862587.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:07.961Z,1528862587.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:03:07.962Z,1528862587.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:08.361Z,1528862588.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:03:08.362Z,1528862588.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:08.768Z,1528862588.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:03:08.769Z,1528862588.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:09.167Z,1528862589.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:03:09.168Z,1528862589.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:09.561Z,1528862589.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:03:09.562Z,1528862589.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:09.971Z,1528862589.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:03:09.972Z,1528862589.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:10.372Z,1528862590.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:03:10.373Z,1528862590.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:10.773Z,1528862590.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:03:10.774Z,1528862590.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:11.164Z,1528862591.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:03:11.165Z,1528862591.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:11.560Z,1528862591.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:03:11.561Z,1528862591.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:11.963Z,1528862591.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:03:11.964Z,1528862591.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:12.371Z,1528862592.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:03:12.372Z,1528862592.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:12.776Z,1528862592.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:03:12.776Z,1528862592.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:13.175Z,1528862593.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:03:13.176Z,1528862593.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:13.573Z,1528862593.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:03:13.574Z,1528862593.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:13.970Z,1528862593.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:03:13.971Z,1528862593.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:14.364Z,1528862594.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:03:14.365Z,1528862594.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:14.764Z,1528862594.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:03:14.765Z,1528862594.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:15.161Z,1528862595.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:03:15.162Z,1528862595.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:15.568Z,1528862595.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:03:15.569Z,1528862595.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:15.975Z,1528862595.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:03:15.976Z,1528862595.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:16.372Z,1528862596.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:03:16.373Z,1528862596.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:16.774Z,1528862596.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:03:16.775Z,1528862596.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:17.168Z,1528862597.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:03:17.169Z,1528862597.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:17.565Z,1528862597.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:03:17.566Z,1528862597.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:17.972Z,1528862597.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:03:17.973Z,1528862597.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:18.379Z,1528862598.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:03:18.380Z,1528862598.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:18.774Z,1528862598.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:03:18.775Z,1528862598.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:19.178Z,1528862599.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:03:19.179Z,1528862599.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:19.578Z,1528862599.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:03:19.579Z,1528862599.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:19.964Z,1528862599.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:03:19.965Z,1528862599.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:20.364Z,1528862600.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:03:20.365Z,1528862600.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:20.770Z,1528862600.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:03:20.771Z,1528862600.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:21.172Z,1528862601.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:03:21.177Z,1528862601.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:21.574Z,1528862601.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:03:21.575Z,1528862601.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:21.979Z,1528862601.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:22.374Z,1528862602.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:22.780Z,1528862602.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:23.169Z,1528862603.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:23.556Z,1528862603.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:23.957Z,1528862603.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:24.384Z,1528862604.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:24.788Z,1528862604.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:25.171Z,1528862605.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:25.591Z,1528862605.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:25.959Z,1528862605.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:26.361Z,1528862606.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:26.772Z,1528862606.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:27.172Z,1528862607.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:27.568Z,1528862607.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:27.970Z,1528862607.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:28.360Z,1528862608.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:28.772Z,1528862608.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:29.171Z,1528862609.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:29.568Z,1528862609.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:29.964Z,1528862609.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:30.377Z,1528862610.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:30.776Z,1528862610.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:31.176Z,1528862611.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:31.574Z,1528862611.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:31.961Z,1528862611.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:32.365Z,1528862612.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:32.773Z,1528862612.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:33.172Z,1528862613.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:33.571Z,1528862613.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:33.964Z,1528862613.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:34.361Z,1528862614.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:34.773Z,1528862614.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:35.176Z,1528862615.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:35.576Z,1528862615.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:35.966Z,1528862615.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:36.373Z,1528862616.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:36.776Z,1528862616.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:37.180Z,1528862617.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:37.575Z,1528862617.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:37.966Z,1528862617.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:38.366Z,1528862618.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:38.774Z,1528862618.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:39.174Z,1528862619.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:39.575Z,1528862619.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:39.965Z,1528862619.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:40.360Z,1528862620.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:40.772Z,1528862620.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:41.174Z,1528862621.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:41.576Z,1528862621.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:41.968Z,1528862621.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:42.363Z,1528862622.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:42.772Z,1528862622.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:43.176Z,1528862623.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:43.572Z,1528862623.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:46.671Z,1528862626.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:46.674Z,1528862626.674 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T03:58:46.4Z
2018-06-13T04:03:46.674Z,1528862626.674 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T04:03:46.674Z,1528862626.674 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T04:03:46.811Z,1528862626.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:47.961Z,1528862627.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:48.132Z,1528862628.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:48.515Z,1528862628.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:48.912Z,1528862628.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:52.020Z,1528862632.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:52.114Z,1528862632.114 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20180613T032335/Courier0016.lzma
2018-06-13T04:03:52.232Z,1528862632.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:52.573Z,1528862632.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:52.909Z,1528862632.909 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0016.lzma.bak
2018-06-13T04:03:52.910Z,1528862632.910 [DataOverHttps](INFO): SBD MOMSN=8328531
2018-06-13T04:03:53.006Z,1528862633.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:54.872Z,1528862634.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:55.026Z,1528862635.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:55.424Z,1528862635.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:58.539Z,1528862638.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:58.719Z,1528862638.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:59.125Z,1528862639.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:59.524Z,1528862639.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:03:59.919Z,1528862639.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:00.318Z,1528862640.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:00.720Z,1528862640.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:01.117Z,1528862641.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:01.518Z,1528862641.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:04.637Z,1528862644.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:04.786Z,1528862644.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:05.177Z,1528862645.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:05.576Z,1528862645.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:05.968Z,1528862645.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:06.370Z,1528862646.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:06.771Z,1528862646.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:07.182Z,1528862647.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:07.581Z,1528862647.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:10.696Z,1528862650.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:10.809Z,1528862650.809 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0017.lzma
2018-06-13T04:04:10.885Z,1528862650.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:11.268Z,1528862651.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:11.610Z,1528862651.610 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0017.lzma.bak
2018-06-13T04:04:11.610Z,1528862651.610 [DataOverHttps](INFO): SBD MOMSN=8328537
2018-06-13T04:04:11.672Z,1528862651.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:13.535Z,1528862653.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:13.554Z,1528862653.554 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T04:04:13.554Z,1528862653.554 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T04:04:13.554Z,1528862653.554 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T04:04:13.711Z,1528862653.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:14.108Z,1528862654.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:18.727Z,1528862658.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:18.904Z,1528862658.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:19.264Z,1528862659.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:19.665Z,1528862659.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:20.065Z,1528862660.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:20.465Z,1528862660.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:20.871Z,1528862660.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:21.276Z,1528862661.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:21.680Z,1528862661.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:22.052Z,1528862662.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:22.456Z,1528862662.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:22.856Z,1528862662.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:23.252Z,1528862663.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:23.652Z,1528862663.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:24.059Z,1528862664.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:24.459Z,1528862664.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:24.879Z,1528862664.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:25.256Z,1528862665.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:25.656Z,1528862665.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:26.058Z,1528862666.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:26.455Z,1528862666.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:26.857Z,1528862666.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:27.263Z,1528862667.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:27.664Z,1528862667.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:28.053Z,1528862668.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:28.454Z,1528862668.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:28.868Z,1528862668.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:29.263Z,1528862669.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:29.664Z,1528862669.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:30.056Z,1528862670.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:30.452Z,1528862670.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:30.861Z,1528862670.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:31.263Z,1528862671.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:31.660Z,1528862671.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:32.056Z,1528862672.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:32.469Z,1528862672.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:32.865Z,1528862672.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:33.268Z,1528862673.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:33.665Z,1528862673.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:34.053Z,1528862674.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:34.455Z,1528862674.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:34.865Z,1528862674.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:35.263Z,1528862675.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:35.664Z,1528862675.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:36.056Z,1528862676.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:36.451Z,1528862676.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:36.863Z,1528862676.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:37.264Z,1528862677.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:37.672Z,1528862677.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:38.056Z,1528862678.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:38.459Z,1528862678.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:38.861Z,1528862678.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:39.268Z,1528862679.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:39.665Z,1528862679.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:40.053Z,1528862680.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:40.455Z,1528862680.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:40.872Z,1528862680.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:41.263Z,1528862681.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:41.663Z,1528862681.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:42.059Z,1528862682.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:42.460Z,1528862682.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:42.865Z,1528862682.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:43.276Z,1528862683.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:43.661Z,1528862683.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:44.064Z,1528862684.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:44.460Z,1528862684.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:44.870Z,1528862684.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:45.276Z,1528862685.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:45.671Z,1528862685.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:46.061Z,1528862686.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:46.462Z,1528862686.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:46.876Z,1528862686.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:47.266Z,1528862687.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:47.666Z,1528862687.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:48.068Z,1528862688.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:48.460Z,1528862688.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:48.867Z,1528862688.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:49.272Z,1528862689.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:49.663Z,1528862689.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:50.057Z,1528862690.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:50.472Z,1528862690.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:50.879Z,1528862690.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:51.276Z,1528862691.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:51.677Z,1528862691.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:52.050Z,1528862692.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:52.456Z,1528862692.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:52.879Z,1528862692.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:53.277Z,1528862693.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:53.676Z,1528862693.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:54.053Z,1528862694.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:54.447Z,1528862694.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:54.879Z,1528862694.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:55.279Z,1528862695.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:55.663Z,1528862695.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:56.057Z,1528862696.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:56.452Z,1528862696.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:56.863Z,1528862696.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:57.263Z,1528862697.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:57.663Z,1528862697.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:58.054Z,1528862698.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:58.456Z,1528862698.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:58.863Z,1528862698.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:59.263Z,1528862699.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:04:59.659Z,1528862699.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:00.055Z,1528862700.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:00.451Z,1528862700.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:00.855Z,1528862700.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:01.263Z,1528862701.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:01.659Z,1528862701.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:02.059Z,1528862702.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:02.458Z,1528862702.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:02.852Z,1528862702.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:03.256Z,1528862703.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:03.656Z,1528862703.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:04.060Z,1528862704.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:04.463Z,1528862704.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:04.863Z,1528862704.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:05.252Z,1528862705.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:05.660Z,1528862705.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:06.055Z,1528862706.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:06.452Z,1528862706.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:06.860Z,1528862706.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:07.263Z,1528862707.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:07.662Z,1528862707.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:08.060Z,1528862708.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:08.455Z,1528862708.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:08.851Z,1528862708.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:09.256Z,1528862709.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:09.653Z,1528862709.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:10.060Z,1528862710.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:10.463Z,1528862710.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:10.864Z,1528862710.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:11.252Z,1528862711.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:11.656Z,1528862711.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:12.054Z,1528862712.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:12.452Z,1528862712.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:12.853Z,1528862712.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:13.267Z,1528862713.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:13.667Z,1528862713.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:14.064Z,1528862714.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:14.455Z,1528862714.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:14.854Z,1528862714.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:15.257Z,1528862715.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:15.655Z,1528862715.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:16.064Z,1528862716.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:16.463Z,1528862716.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:16.866Z,1528862716.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:19.960Z,1528862719.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:20.135Z,1528862720.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:20.520Z,1528862720.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:20.919Z,1528862720.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:21.313Z,1528862721.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:21.707Z,1528862721.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:22.106Z,1528862722.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:22.507Z,1528862722.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:22.915Z,1528862722.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:23.312Z,1528862723.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:23.716Z,1528862723.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:24.108Z,1528862724.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:24.506Z,1528862724.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:24.916Z,1528862724.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:25.315Z,1528862725.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:25.716Z,1528862725.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:26.108Z,1528862726.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:26.508Z,1528862726.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:26.911Z,1528862726.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:27.315Z,1528862727.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:27.720Z,1528862727.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:28.109Z,1528862728.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:28.508Z,1528862728.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:28.913Z,1528862728.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:29.319Z,1528862729.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:29.720Z,1528862729.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:30.109Z,1528862730.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:30.507Z,1528862730.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:30.915Z,1528862730.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:31.315Z,1528862731.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:31.716Z,1528862731.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:32.117Z,1528862732.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:32.510Z,1528862732.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:32.917Z,1528862732.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:33.320Z,1528862733.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:33.724Z,1528862733.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:34.107Z,1528862734.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:34.508Z,1528862734.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:34.910Z,1528862734.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:35.317Z,1528862735.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:35.724Z,1528862735.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:36.121Z,1528862736.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:36.506Z,1528862736.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:36.906Z,1528862736.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:37.308Z,1528862737.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:37.712Z,1528862737.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:38.117Z,1528862738.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:38.543Z,1528862738.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:38.917Z,1528862738.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:39.308Z,1528862739.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:39.708Z,1528862739.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:40.112Z,1528862740.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:40.512Z,1528862740.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:40.916Z,1528862740.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:41.317Z,1528862741.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:41.721Z,1528862741.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:42.123Z,1528862742.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:42.509Z,1528862742.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:42.908Z,1528862742.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:43.310Z,1528862743.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:43.708Z,1528862743.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:44.117Z,1528862744.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:44.523Z,1528862744.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:44.918Z,1528862744.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:45.316Z,1528862745.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:45.711Z,1528862745.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:46.112Z,1528862746.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:46.517Z,1528862746.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:46.911Z,1528862746.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:47.316Z,1528862747.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:47.720Z,1528862747.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:48.128Z,1528862748.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:48.519Z,1528862748.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:48.919Z,1528862748.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:49.320Z,1528862749.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:49.728Z,1528862749.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:50.118Z,1528862750.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:50.522Z,1528862750.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:50.914Z,1528862750.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:51.313Z,1528862751.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:51.720Z,1528862751.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:52.105Z,1528862752.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:52.509Z,1528862752.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:52.935Z,1528862752.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:53.326Z,1528862753.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:53.723Z,1528862753.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:54.127Z,1528862754.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:54.524Z,1528862754.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:54.904Z,1528862754.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:55.306Z,1528862755.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:55.699Z,1528862755.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:56.132Z,1528862756.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:56.531Z,1528862756.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:56.911Z,1528862756.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:57.304Z,1528862757.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:57.704Z,1528862757.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:58.104Z,1528862758.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:58.508Z,1528862758.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:58.905Z,1528862758.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:59.311Z,1528862759.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:05:59.715Z,1528862759.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:00.115Z,1528862760.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:00.505Z,1528862760.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:00.909Z,1528862760.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:01.318Z,1528862761.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:01.710Z,1528862761.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:02.116Z,1528862762.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:02.515Z,1528862762.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:02.911Z,1528862762.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:02.911Z,1528862762.911 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2018-06-13T04:06:02.911Z,1528862762.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:06:02.913Z,1528862762.913 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:02.913Z,1528862762.913 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-06-13T04:06:02.914Z,1528862762.914 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:06:02.915Z,1528862762.915 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:02.915Z,1528862762.915 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-06-13T04:06:02.915Z,1528862762.915 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:06:03.009Z,1528862763.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:06:03.009Z,1528862763.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:06:03.010Z,1528862763.010 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:06:03.381Z,1528862763.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:06:03.381Z,1528862763.381 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2018-06-13T04:06:03.382Z,1528862763.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:06:03.382Z,1528862763.382 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-06-13T04:06:03.382Z,1528862763.382 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:06:03.382Z,1528862763.382 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-06-13T04:06:03.712Z,1528862763.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:06:03.713Z,1528862763.713 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:06:03.713Z,1528862763.713 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:06:03.714Z,1528862763.714 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:06:03.714Z,1528862763.714 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:06:03.714Z,1528862763.714 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:06:03.715Z,1528862763.715 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:06:03.715Z,1528862763.715 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:06:03.715Z,1528862763.715 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:06:04.103Z,1528862764.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:06:04.104Z,1528862764.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:04.508Z,1528862764.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:06:04.509Z,1528862764.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:04.920Z,1528862764.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:06:04.925Z,1528862764.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:05.317Z,1528862765.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:06:05.318Z,1528862765.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:05.723Z,1528862765.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:06:05.724Z,1528862765.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:06.122Z,1528862766.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:06:06.123Z,1528862766.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:06.514Z,1528862766.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:06:06.515Z,1528862766.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:06.916Z,1528862766.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:06:06.916Z,1528862766.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:07.323Z,1528862767.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:06:07.324Z,1528862767.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:07.714Z,1528862767.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:06:07.715Z,1528862767.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:08.129Z,1528862768.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:06:08.130Z,1528862768.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:08.532Z,1528862768.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:06:08.537Z,1528862768.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:08.924Z,1528862768.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:06:08.925Z,1528862768.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:09.303Z,1528862769.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:06:09.304Z,1528862769.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:09.728Z,1528862769.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:06:09.734Z,1528862769.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:10.104Z,1528862770.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:06:10.104Z,1528862770.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:10.505Z,1528862770.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:06:10.506Z,1528862770.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:10.904Z,1528862770.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:06:10.905Z,1528862770.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:11.311Z,1528862771.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:06:11.312Z,1528862771.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:11.715Z,1528862771.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:06:11.716Z,1528862771.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:12.115Z,1528862772.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:06:12.116Z,1528862772.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:12.513Z,1528862772.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:06:12.514Z,1528862772.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:12.908Z,1528862772.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:06:12.909Z,1528862772.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:13.307Z,1528862773.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:06:13.308Z,1528862773.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:13.705Z,1528862773.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:06:13.706Z,1528862773.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:14.119Z,1528862774.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:06:14.119Z,1528862774.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:14.515Z,1528862774.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:06:14.516Z,1528862774.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:14.916Z,1528862774.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:06:14.917Z,1528862774.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:15.310Z,1528862775.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:06:15.311Z,1528862775.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:18.416Z,1528862778.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T04:06:18.417Z,1528862778.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:18.603Z,1528862778.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T04:06:18.604Z,1528862778.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:18.998Z,1528862778.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T04:06:18.999Z,1528862778.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:19.402Z,1528862779.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T04:06:19.403Z,1528862779.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:19.794Z,1528862779.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T04:06:19.795Z,1528862779.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:20.189Z,1528862780.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T04:06:20.190Z,1528862780.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:20.600Z,1528862780.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T04:06:20.601Z,1528862780.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:20.994Z,1528862780.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T04:06:20.995Z,1528862780.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:21.404Z,1528862781.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T04:06:21.405Z,1528862781.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:21.798Z,1528862781.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T04:06:21.799Z,1528862781.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:22.193Z,1528862782.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T04:06:22.194Z,1528862782.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:22.580Z,1528862782.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T04:06:22.601Z,1528862782.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:23.006Z,1528862783.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:23.404Z,1528862783.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:23.807Z,1528862783.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:24.208Z,1528862784.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:24.579Z,1528862784.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:25.007Z,1528862785.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:25.392Z,1528862785.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:25.788Z,1528862785.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:26.182Z,1528862786.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:26.591Z,1528862786.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:26.980Z,1528862786.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:27.388Z,1528862787.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:27.791Z,1528862787.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:28.187Z,1528862788.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:28.584Z,1528862788.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:28.983Z,1528862788.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:29.379Z,1528862789.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:29.783Z,1528862789.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:30.209Z,1528862790.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:30.594Z,1528862790.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:30.993Z,1528862790.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:31.388Z,1528862791.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:31.781Z,1528862791.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:32.185Z,1528862792.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:32.588Z,1528862792.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:32.981Z,1528862792.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:33.391Z,1528862793.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:33.793Z,1528862793.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:34.191Z,1528862794.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:34.585Z,1528862794.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:34.989Z,1528862794.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:35.388Z,1528862795.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:35.788Z,1528862795.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:36.143Z,1528862796.143 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T04:06:36.143Z,1528862796.143 [NAL9602] Data Fault, FailCount= 4
2018-06-13T04:06:36.143Z,1528862796.143 [NAL9602](ERROR): Data Fault
2018-06-13T04:06:36.212Z,1528862796.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:36.301Z,1528862796.301 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T04:06:36.538Z,1528862796.538 [NAL9602](INFO): Powering down
2018-06-13T04:06:36.592Z,1528862796.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:36.000Z,1528862797.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:37.399Z,1528862797.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:37.477Z,1528862797.477 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T04:06:37.477Z,1528862797.477 [NAL9602] No Fault, FailCount= 4
2018-06-13T04:06:37.772Z,1528862797.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:38.202Z,1528862798.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:38.571Z,1528862798.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:38.972Z,1528862798.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:39.379Z,1528862799.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:39.779Z,1528862799.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:40.175Z,1528862800.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:40.579Z,1528862800.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:40.978Z,1528862800.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:41.377Z,1528862801.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:41.780Z,1528862801.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:42.178Z,1528862802.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:42.575Z,1528862802.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:42.979Z,1528862802.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:43.379Z,1528862803.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:43.775Z,1528862803.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:44.179Z,1528862804.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:44.579Z,1528862804.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:44.975Z,1528862804.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:45.379Z,1528862805.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:45.777Z,1528862805.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:46.177Z,1528862806.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:46.584Z,1528862806.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:46.978Z,1528862806.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:47.379Z,1528862807.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:47.779Z,1528862807.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:48.179Z,1528862808.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:48.578Z,1528862808.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:48.979Z,1528862808.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:49.379Z,1528862809.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:49.778Z,1528862809.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:50.180Z,1528862810.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:50.585Z,1528862810.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:50.977Z,1528862810.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:51.380Z,1528862811.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:51.783Z,1528862811.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:52.178Z,1528862812.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:52.580Z,1528862812.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:52.979Z,1528862812.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:53.380Z,1528862813.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:53.784Z,1528862813.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:54.182Z,1528862814.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:54.578Z,1528862814.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:54.982Z,1528862814.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:55.382Z,1528862815.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:55.777Z,1528862815.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:56.188Z,1528862816.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:56.582Z,1528862816.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:56.977Z,1528862816.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:57.382Z,1528862817.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:57.782Z,1528862817.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:58.178Z,1528862818.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:58.582Z,1528862818.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:58.982Z,1528862818.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:59.382Z,1528862819.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:06:59.782Z,1528862819.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:00.183Z,1528862820.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:00.578Z,1528862820.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:00.982Z,1528862820.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:01.382Z,1528862821.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:01.777Z,1528862821.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:02.182Z,1528862822.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:02.582Z,1528862822.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:02.978Z,1528862822.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:03.382Z,1528862823.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:03.782Z,1528862823.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:04.182Z,1528862824.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:04.581Z,1528862824.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:04.983Z,1528862824.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:05.381Z,1528862825.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:05.783Z,1528862825.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:06.182Z,1528862826.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:06.542Z,1528862826.542 [NAL9602](INFO): Powering up NAL9602
2018-06-13T04:07:06.587Z,1528862826.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:06.983Z,1528862826.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:07.382Z,1528862827.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:07.786Z,1528862827.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:08.182Z,1528862828.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:08.582Z,1528862828.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:08.978Z,1528862828.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:09.383Z,1528862829.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:09.783Z,1528862829.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:10.180Z,1528862830.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:10.593Z,1528862830.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:10.992Z,1528862830.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:11.398Z,1528862831.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:11.797Z,1528862831.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:12.180Z,1528862832.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:12.576Z,1528862832.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:12.984Z,1528862832.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:13.376Z,1528862833.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:13.779Z,1528862833.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:14.196Z,1528862834.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:17.312Z,1528862837.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:17.484Z,1528862837.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:17.818Z,1528862837.818 [NAL9602](INFO): NAL9602 initialized
2018-06-13T04:07:17.867Z,1528862837.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:18.264Z,1528862838.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:18.666Z,1528862838.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:19.072Z,1528862839.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:19.480Z,1528862839.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:19.864Z,1528862839.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:20.267Z,1528862840.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:20.662Z,1528862840.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:21.068Z,1528862841.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:21.468Z,1528862841.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:21.876Z,1528862841.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:22.276Z,1528862842.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:22.666Z,1528862842.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:23.049Z,1528862843.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:23.450Z,1528862843.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:23.852Z,1528862843.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:24.280Z,1528862844.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:24.664Z,1528862844.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:25.059Z,1528862845.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:25.456Z,1528862845.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:25.854Z,1528862845.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:26.259Z,1528862846.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:26.663Z,1528862846.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:27.059Z,1528862847.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:27.455Z,1528862847.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:27.854Z,1528862847.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:28.257Z,1528862848.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:28.663Z,1528862848.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:29.062Z,1528862849.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:29.455Z,1528862849.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:29.854Z,1528862849.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:30.263Z,1528862850.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:30.659Z,1528862850.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:31.059Z,1528862851.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:31.455Z,1528862851.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:31.854Z,1528862851.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:32.263Z,1528862852.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:32.662Z,1528862852.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:33.059Z,1528862853.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:33.462Z,1528862853.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:33.855Z,1528862853.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:34.261Z,1528862854.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:34.663Z,1528862854.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:35.061Z,1528862855.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:35.456Z,1528862855.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:35.855Z,1528862855.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:36.263Z,1528862856.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:36.663Z,1528862856.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:37.063Z,1528862857.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:37.459Z,1528862857.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:37.855Z,1528862857.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:38.264Z,1528862858.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:38.662Z,1528862858.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:39.060Z,1528862859.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:39.457Z,1528862859.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:39.855Z,1528862859.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:40.261Z,1528862860.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:40.663Z,1528862860.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:41.064Z,1528862861.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:41.456Z,1528862861.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:41.855Z,1528862861.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:42.263Z,1528862862.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:42.663Z,1528862862.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:43.065Z,1528862863.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:43.456Z,1528862863.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:43.855Z,1528862863.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:44.264Z,1528862864.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:44.662Z,1528862864.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:45.064Z,1528862865.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:45.456Z,1528862865.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:45.867Z,1528862865.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:46.301Z,1528862866.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:46.660Z,1528862866.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:47.068Z,1528862867.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:47.455Z,1528862867.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:47.856Z,1528862867.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:48.263Z,1528862868.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:48.667Z,1528862868.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:49.064Z,1528862869.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:49.456Z,1528862869.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:49.855Z,1528862869.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:50.264Z,1528862870.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:50.663Z,1528862870.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:51.063Z,1528862871.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:51.457Z,1528862871.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:51.855Z,1528862871.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:52.264Z,1528862872.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:52.664Z,1528862872.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:53.060Z,1528862873.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:53.464Z,1528862873.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:53.854Z,1528862873.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:54.263Z,1528862874.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:54.663Z,1528862874.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:55.064Z,1528862875.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:55.462Z,1528862875.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:55.860Z,1528862875.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:56.261Z,1528862876.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:56.663Z,1528862876.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:57.064Z,1528862877.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:57.458Z,1528862877.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:57.856Z,1528862877.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:58.263Z,1528862878.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:58.666Z,1528862878.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:59.063Z,1528862879.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:59.456Z,1528862879.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:07:59.866Z,1528862879.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:00.264Z,1528862880.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:00.661Z,1528862880.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:01.063Z,1528862881.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:01.468Z,1528862881.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:01.853Z,1528862881.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:02.258Z,1528862882.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:02.658Z,1528862882.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:03.054Z,1528862883.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:03.459Z,1528862883.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:03.860Z,1528862883.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:04.259Z,1528862884.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:04.656Z,1528862884.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:05.056Z,1528862885.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:05.452Z,1528862885.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:05.857Z,1528862885.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:06.265Z,1528862886.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:06.661Z,1528862886.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:07.072Z,1528862887.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:07.465Z,1528862887.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:07.856Z,1528862887.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:08.256Z,1528862888.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:08.657Z,1528862888.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:09.060Z,1528862889.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:09.464Z,1528862889.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:09.865Z,1528862889.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:10.268Z,1528862890.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:10.656Z,1528862890.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:11.056Z,1528862891.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:11.455Z,1528862891.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:11.862Z,1528862891.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:12.268Z,1528862892.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:12.672Z,1528862892.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:13.069Z,1528862893.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:13.470Z,1528862893.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:13.860Z,1528862893.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:14.264Z,1528862894.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:14.664Z,1528862894.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:15.068Z,1528862895.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:15.470Z,1528862895.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:18.578Z,1528862898.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:18.736Z,1528862898.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:19.108Z,1528862899.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:19.513Z,1528862899.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:19.911Z,1528862899.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:20.314Z,1528862900.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:20.719Z,1528862900.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:21.112Z,1528862901.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:21.510Z,1528862901.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:21.912Z,1528862901.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:22.320Z,1528862902.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:22.719Z,1528862902.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:23.120Z,1528862903.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:23.509Z,1528862903.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:23.914Z,1528862903.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:24.324Z,1528862904.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:24.717Z,1528862904.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:25.115Z,1528862905.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:25.515Z,1528862905.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:25.912Z,1528862905.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:26.315Z,1528862906.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:26.730Z,1528862906.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:27.118Z,1528862907.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:27.517Z,1528862907.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:27.897Z,1528862907.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:28.323Z,1528862908.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:28.726Z,1528862908.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:29.111Z,1528862909.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:29.503Z,1528862909.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:29.904Z,1528862909.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:30.311Z,1528862910.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:30.707Z,1528862910.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:31.107Z,1528862911.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:31.503Z,1528862911.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:31.899Z,1528862911.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:32.302Z,1528862912.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:32.711Z,1528862912.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:33.110Z,1528862913.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:33.507Z,1528862913.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:33.903Z,1528862913.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:34.300Z,1528862914.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:34.702Z,1528862914.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:35.108Z,1528862915.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:35.507Z,1528862915.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:35.911Z,1528862915.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:36.311Z,1528862916.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:36.699Z,1528862916.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:37.102Z,1528862917.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:37.503Z,1528862917.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:37.903Z,1528862917.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:38.301Z,1528862918.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:38.711Z,1528862918.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:39.112Z,1528862919.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:39.507Z,1528862919.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:39.904Z,1528862919.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:40.303Z,1528862920.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:40.704Z,1528862920.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:41.103Z,1528862921.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:41.505Z,1528862921.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:41.911Z,1528862921.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:42.311Z,1528862922.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:42.701Z,1528862922.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:43.104Z,1528862923.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:43.504Z,1528862923.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:43.902Z,1528862923.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:44.302Z,1528862924.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:44.716Z,1528862924.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:45.112Z,1528862925.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:45.512Z,1528862925.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:45.905Z,1528862925.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:46.303Z,1528862926.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:46.705Z,1528862926.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:47.104Z,1528862927.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:47.508Z,1528862927.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:47.911Z,1528862927.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:48.319Z,1528862928.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:48.703Z,1528862928.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:49.102Z,1528862929.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:49.504Z,1528862929.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:49.900Z,1528862929.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:50.302Z,1528862930.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:50.712Z,1528862930.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:51.111Z,1528862931.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:51.512Z,1528862931.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:51.903Z,1528862931.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:52.300Z,1528862932.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:52.703Z,1528862932.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:53.104Z,1528862933.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:53.508Z,1528862933.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:53.911Z,1528862933.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:54.316Z,1528862934.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:54.702Z,1528862934.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:55.103Z,1528862935.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:55.504Z,1528862935.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:55.903Z,1528862935.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:56.304Z,1528862936.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:56.711Z,1528862936.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:57.112Z,1528862937.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:57.509Z,1528862937.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:57.903Z,1528862937.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:58.301Z,1528862938.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:58.703Z,1528862938.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:59.107Z,1528862939.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:59.511Z,1528862939.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:08:59.911Z,1528862939.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:00.312Z,1528862940.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:00.702Z,1528862940.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:01.102Z,1528862941.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:01.504Z,1528862941.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:01.901Z,1528862941.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:02.304Z,1528862942.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:02.719Z,1528862942.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:03.119Z,1528862943.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:03.512Z,1528862943.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:03.913Z,1528862943.913 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:03.913Z,1528862943.913 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2018-06-13T04:09:03.913Z,1528862943.913 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:09:03.915Z,1528862943.915 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:03.915Z,1528862943.915 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-06-13T04:09:03.915Z,1528862943.915 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:09:03.916Z,1528862943.916 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:03.917Z,1528862943.917 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-06-13T04:09:03.917Z,1528862943.917 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:09:04.009Z,1528862944.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:09:04.009Z,1528862944.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:09:04.010Z,1528862944.010 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:09:04.377Z,1528862944.377 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:09:04.377Z,1528862944.377 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2018-06-13T04:09:04.378Z,1528862944.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:09:04.378Z,1528862944.378 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-06-13T04:09:04.378Z,1528862944.378 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:09:04.378Z,1528862944.378 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-06-13T04:09:04.704Z,1528862944.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:09:04.704Z,1528862944.704 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:09:04.704Z,1528862944.704 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:09:04.705Z,1528862944.705 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:09:04.705Z,1528862944.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:09:04.706Z,1528862944.706 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:09:04.706Z,1528862944.706 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:09:04.706Z,1528862944.706 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:09:04.707Z,1528862944.707 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:09:05.117Z,1528862945.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:09:05.118Z,1528862945.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:05.513Z,1528862945.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:09:05.514Z,1528862945.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:05.917Z,1528862945.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:09:05.918Z,1528862945.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:06.317Z,1528862946.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:09:06.318Z,1528862946.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:06.703Z,1528862946.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:09:06.704Z,1528862946.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:07.108Z,1528862947.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:09:07.109Z,1528862947.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:07.509Z,1528862947.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:09:07.510Z,1528862947.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:07.909Z,1528862947.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:09:07.910Z,1528862947.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:08.309Z,1528862948.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:09:08.310Z,1528862948.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:08.722Z,1528862948.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:09:08.723Z,1528862948.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:09.114Z,1528862949.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:09:09.115Z,1528862949.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:09.512Z,1528862949.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:09:09.513Z,1528862949.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:09.916Z,1528862949.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:09:09.917Z,1528862949.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:10.306Z,1528862950.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:09:10.307Z,1528862950.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:10.708Z,1528862950.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:09:10.709Z,1528862950.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:11.112Z,1528862951.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:09:11.113Z,1528862951.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:11.513Z,1528862951.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:09:11.514Z,1528862951.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:11.919Z,1528862951.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:09:11.920Z,1528862951.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:12.322Z,1528862952.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:09:12.322Z,1528862952.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:12.714Z,1528862952.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:09:12.715Z,1528862952.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:13.114Z,1528862953.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:09:13.115Z,1528862953.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:13.510Z,1528862953.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:09:13.511Z,1528862953.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:13.908Z,1528862953.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:09:13.910Z,1528862953.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:13.912Z,1528862953.912 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T04:09:13.913Z,1528862953.913 [Default:CheckIn:C.Wait] Stopped
2018-06-13T04:09:13.913Z,1528862953.913 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T04:09:13.913Z,1528862953.913 [Default:CheckIn:D] Running Loop=1
2018-06-13T04:09:14.316Z,1528862954.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:09:14.321Z,1528862954.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:14.324Z,1528862954.324 [Default:CheckIn:D] Stopped
2018-06-13T04:09:14.324Z,1528862954.324 [Default:CheckIn:E] Running Loop=1
2018-06-13T04:09:17.425Z,1528862957.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-06-13T04:09:17.426Z,1528862957.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:17.430Z,1528862957.430 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 42.014644 min 
2018-06-13T04:09:17.430Z,1528862957.430 [Default:CheckIn:E] Stopped
2018-06-13T04:09:17.430Z,1528862957.430 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T04:09:17.430Z,1528862957.430 [Default:CheckIn] Stopped
2018-06-13T04:09:17.430Z,1528862957.430 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T04:09:17.430Z,1528862957.430 [Default:CheckIn](INFO): Running loop #5
2018-06-13T04:09:17.430Z,1528862957.430 [Default:CheckIn] Running Loop=5
2018-06-13T04:09:17.430Z,1528862957.430 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T04:09:17.431Z,1528862957.431 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T04:09:17.572Z,1528862957.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T04:09:17.572Z,1528862957.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:17.964Z,1528862957.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T04:09:17.966Z,1528862957.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:18.368Z,1528862958.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T04:09:18.369Z,1528862958.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:18.760Z,1528862958.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:09:18.761Z,1528862958.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:19.168Z,1528862959.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T04:09:19.173Z,1528862959.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:19.569Z,1528862959.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T04:09:19.570Z,1528862959.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:19.964Z,1528862959.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T04:09:19.965Z,1528862959.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:20.364Z,1528862960.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T04:09:20.365Z,1528862960.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:20.765Z,1528862960.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T04:09:20.766Z,1528862960.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:21.156Z,1528862961.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:09:21.157Z,1528862961.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:21.564Z,1528862961.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T04:09:21.565Z,1528862961.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:21.959Z,1528862961.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:09:21.960Z,1528862961.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:22.363Z,1528862962.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T04:09:22.364Z,1528862962.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:22.765Z,1528862962.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T04:09:22.766Z,1528862962.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:23.173Z,1528862963.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T04:09:23.174Z,1528862963.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:23.565Z,1528862963.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T04:09:23.566Z,1528862963.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:23.956Z,1528862963.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:24.360Z,1528862964.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:24.764Z,1528862964.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:25.167Z,1528862965.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:25.571Z,1528862965.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:25.965Z,1528862965.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:26.370Z,1528862966.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:26.765Z,1528862966.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:27.153Z,1528862967.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:27.559Z,1528862967.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:27.961Z,1528862967.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:28.364Z,1528862968.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:28.766Z,1528862968.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:29.171Z,1528862969.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:29.562Z,1528862969.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:29.964Z,1528862969.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:30.366Z,1528862970.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:30.763Z,1528862970.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:31.156Z,1528862971.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:31.570Z,1528862971.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:31.963Z,1528862971.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:32.364Z,1528862972.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:32.758Z,1528862972.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:33.156Z,1528862973.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:33.556Z,1528862973.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:33.959Z,1528862973.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:34.357Z,1528862974.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:34.772Z,1528862974.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:35.174Z,1528862975.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:35.561Z,1528862975.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:35.960Z,1528862975.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:36.370Z,1528862976.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:36.766Z,1528862976.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:37.165Z,1528862977.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:37.573Z,1528862977.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:37.967Z,1528862977.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:38.366Z,1528862978.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:38.744Z,1528862978.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:39.170Z,1528862979.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:39.568Z,1528862979.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:39.952Z,1528862979.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:40.348Z,1528862980.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:40.775Z,1528862980.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:41.181Z,1528862981.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:41.578Z,1528862981.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:41.962Z,1528862981.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:42.352Z,1528862982.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:42.753Z,1528862982.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:43.156Z,1528862983.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:43.585Z,1528862983.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:43.981Z,1528862983.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:44.380Z,1528862984.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:44.751Z,1528862984.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:45.152Z,1528862985.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:45.580Z,1528862985.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:45.957Z,1528862985.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:46.351Z,1528862986.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:46.785Z,1528862986.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:47.189Z,1528862987.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:47.587Z,1528862987.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:47.953Z,1528862987.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:48.351Z,1528862988.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:48.764Z,1528862988.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:49.155Z,1528862989.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:49.568Z,1528862989.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:49.963Z,1528862989.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:50.359Z,1528862990.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:50.756Z,1528862990.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:51.155Z,1528862991.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:51.554Z,1528862991.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:51.962Z,1528862991.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:52.357Z,1528862992.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:52.764Z,1528862992.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:53.167Z,1528862993.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:53.568Z,1528862993.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:53.958Z,1528862993.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:54.364Z,1528862994.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:54.755Z,1528862994.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:55.155Z,1528862995.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:55.567Z,1528862995.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:55.967Z,1528862995.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:56.363Z,1528862996.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:56.761Z,1528862996.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:57.159Z,1528862997.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:57.558Z,1528862997.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:57.960Z,1528862997.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:58.364Z,1528862998.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:58.764Z,1528862998.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:59.163Z,1528862999.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:59.568Z,1528862999.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:09:59.960Z,1528862999.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:00.362Z,1528863000.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:00.758Z,1528863000.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:01.159Z,1528863001.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:01.568Z,1528863001.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:01.968Z,1528863001.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:02.364Z,1528863002.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:02.761Z,1528863002.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:03.158Z,1528863003.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:03.562Z,1528863003.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:03.962Z,1528863003.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:04.360Z,1528863004.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:04.767Z,1528863004.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:05.179Z,1528863005.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:05.568Z,1528863005.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:05.967Z,1528863005.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:06.369Z,1528863006.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:06.762Z,1528863006.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:07.160Z,1528863007.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:07.575Z,1528863007.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:07.971Z,1528863007.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:08.376Z,1528863008.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:08.769Z,1528863008.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:09.146Z,1528863009.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:09.575Z,1528863009.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:09.978Z,1528863009.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:10.355Z,1528863010.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:10.776Z,1528863010.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:11.178Z,1528863011.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:11.574Z,1528863011.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:11.956Z,1528863011.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:12.355Z,1528863012.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:12.776Z,1528863012.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:13.156Z,1528863013.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:13.582Z,1528863013.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:13.980Z,1528863013.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:14.384Z,1528863014.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:14.758Z,1528863014.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:15.156Z,1528863015.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:15.554Z,1528863015.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:15.984Z,1528863015.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:16.359Z,1528863016.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:16.782Z,1528863016.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:17.168Z,1528863017.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:20.271Z,1528863020.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:20.449Z,1528863020.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:20.847Z,1528863020.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:21.240Z,1528863021.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:21.646Z,1528863021.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:22.060Z,1528863022.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:22.446Z,1528863022.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:22.848Z,1528863022.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:23.229Z,1528863023.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:23.632Z,1528863023.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:24.034Z,1528863024.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:24.429Z,1528863024.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:24.855Z,1528863024.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:25.259Z,1528863025.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:25.643Z,1528863025.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:26.034Z,1528863026.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:26.433Z,1528863026.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:26.848Z,1528863026.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:27.234Z,1528863027.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:27.639Z,1528863027.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:28.043Z,1528863028.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:28.440Z,1528863028.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:28.836Z,1528863028.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:29.242Z,1528863029.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:29.633Z,1528863029.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:30.037Z,1528863030.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:30.439Z,1528863030.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:30.841Z,1528863030.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:31.243Z,1528863031.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:31.644Z,1528863031.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:32.040Z,1528863032.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:32.436Z,1528863032.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:32.837Z,1528863032.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:33.235Z,1528863033.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:33.644Z,1528863033.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:34.044Z,1528863034.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:34.439Z,1528863034.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:34.835Z,1528863034.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:35.239Z,1528863035.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:35.635Z,1528863035.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:36.036Z,1528863036.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:36.439Z,1528863036.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:36.848Z,1528863036.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:37.247Z,1528863037.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:37.644Z,1528863037.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:38.032Z,1528863038.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:38.437Z,1528863038.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:38.840Z,1528863038.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:39.235Z,1528863039.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:39.644Z,1528863039.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:40.043Z,1528863040.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:40.444Z,1528863040.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:40.835Z,1528863040.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:41.236Z,1528863041.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:41.637Z,1528863041.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:42.038Z,1528863042.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:42.435Z,1528863042.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:42.844Z,1528863042.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:43.243Z,1528863043.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:43.647Z,1528863043.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:44.040Z,1528863044.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:44.437Z,1528863044.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:44.852Z,1528863044.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:45.234Z,1528863045.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:45.644Z,1528863045.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:46.050Z,1528863046.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:46.448Z,1528863046.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:46.838Z,1528863046.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:47.238Z,1528863047.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:47.637Z,1528863047.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:48.041Z,1528863048.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:48.439Z,1528863048.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:48.849Z,1528863048.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:49.247Z,1528863049.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:49.653Z,1528863049.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:50.037Z,1528863050.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:50.438Z,1528863050.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:50.838Z,1528863050.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:51.242Z,1528863051.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:51.649Z,1528863051.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:52.051Z,1528863052.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:52.446Z,1528863052.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:52.875Z,1528863052.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:53.248Z,1528863053.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:53.642Z,1528863053.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:54.041Z,1528863054.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:54.444Z,1528863054.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:54.848Z,1528863054.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:55.248Z,1528863055.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:55.654Z,1528863055.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:56.048Z,1528863056.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:56.440Z,1528863056.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:56.844Z,1528863056.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:57.239Z,1528863057.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:57.656Z,1528863057.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:58.056Z,1528863058.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:58.448Z,1528863058.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:58.848Z,1528863058.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:59.259Z,1528863059.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:10:59.646Z,1528863059.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:00.032Z,1528863060.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:00.436Z,1528863060.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:00.861Z,1528863060.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:01.261Z,1528863061.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:01.675Z,1528863061.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:02.033Z,1528863062.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:02.463Z,1528863062.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:02.837Z,1528863062.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:03.234Z,1528863063.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:03.664Z,1528863063.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:04.068Z,1528863064.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:04.468Z,1528863064.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:04.837Z,1528863064.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:05.240Z,1528863065.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:05.665Z,1528863065.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:06.039Z,1528863066.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:06.441Z,1528863066.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:06.838Z,1528863066.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:07.268Z,1528863067.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:07.668Z,1528863067.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:08.038Z,1528863068.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:08.438Z,1528863068.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:08.860Z,1528863068.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:09.241Z,1528863069.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:09.644Z,1528863069.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:10.046Z,1528863070.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:10.464Z,1528863070.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:10.836Z,1528863070.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:11.240Z,1528863071.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:11.636Z,1528863071.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:12.064Z,1528863072.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:12.437Z,1528863072.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:12.840Z,1528863072.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:13.245Z,1528863073.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:13.672Z,1528863073.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:14.036Z,1528863074.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:14.440Z,1528863074.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:14.841Z,1528863074.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:15.268Z,1528863075.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:15.641Z,1528863075.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:16.048Z,1528863076.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:16.448Z,1528863076.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:16.870Z,1528863076.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:17.239Z,1528863077.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:17.638Z,1528863077.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:20.775Z,1528863080.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:20.924Z,1528863080.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:21.327Z,1528863081.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:21.728Z,1528863081.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:22.126Z,1528863082.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:22.508Z,1528863082.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:22.903Z,1528863082.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:23.307Z,1528863083.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:23.732Z,1528863083.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:24.136Z,1528863084.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:24.531Z,1528863084.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:24.907Z,1528863084.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:25.307Z,1528863085.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:25.704Z,1528863085.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:26.112Z,1528863086.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:26.512Z,1528863086.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:26.939Z,1528863086.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:27.319Z,1528863087.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:27.715Z,1528863087.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:28.113Z,1528863088.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:28.516Z,1528863088.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:28.916Z,1528863088.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:29.312Z,1528863089.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:29.715Z,1528863089.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:30.115Z,1528863090.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:30.519Z,1528863090.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:30.907Z,1528863090.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:31.322Z,1528863091.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:31.710Z,1528863091.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:32.111Z,1528863092.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:32.512Z,1528863092.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:32.924Z,1528863092.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:33.315Z,1528863093.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:33.719Z,1528863093.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:34.105Z,1528863094.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:34.511Z,1528863094.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:34.911Z,1528863094.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:35.310Z,1528863095.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:35.724Z,1528863095.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:36.124Z,1528863096.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:36.516Z,1528863096.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:36.912Z,1528863096.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:37.312Z,1528863097.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:37.707Z,1528863097.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:38.123Z,1528863098.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:38.514Z,1528863098.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:38.916Z,1528863098.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:39.318Z,1528863099.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:39.721Z,1528863099.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:40.112Z,1528863100.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:40.511Z,1528863100.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:40.917Z,1528863100.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:41.307Z,1528863101.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:41.716Z,1528863101.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:42.119Z,1528863102.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:42.524Z,1528863102.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:42.911Z,1528863102.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:43.323Z,1528863103.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:43.710Z,1528863103.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:44.128Z,1528863104.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:44.542Z,1528863104.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:44.917Z,1528863104.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:45.319Z,1528863105.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:45.720Z,1528863105.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:46.107Z,1528863106.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:46.511Z,1528863106.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:46.912Z,1528863106.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:47.324Z,1528863107.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:47.742Z,1528863107.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:48.122Z,1528863108.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:48.517Z,1528863108.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:48.924Z,1528863108.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:49.313Z,1528863109.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:49.709Z,1528863109.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:50.114Z,1528863110.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:50.524Z,1528863110.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:50.917Z,1528863110.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:51.318Z,1528863111.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:51.720Z,1528863111.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:52.124Z,1528863112.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:52.513Z,1528863112.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:52.920Z,1528863112.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:53.309Z,1528863113.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:53.743Z,1528863113.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:54.123Z,1528863114.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:54.515Z,1528863114.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:54.921Z,1528863114.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:55.328Z,1528863115.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:55.725Z,1528863115.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:56.126Z,1528863116.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:56.520Z,1528863116.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:56.946Z,1528863116.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:57.326Z,1528863117.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:57.732Z,1528863117.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:58.114Z,1528863118.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:58.528Z,1528863118.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:58.918Z,1528863118.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:59.309Z,1528863119.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:11:59.722Z,1528863119.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:00.148Z,1528863120.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:00.522Z,1528863120.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:00.914Z,1528863120.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:01.316Z,1528863121.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:01.729Z,1528863121.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:02.109Z,1528863122.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:02.524Z,1528863122.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:02.920Z,1528863122.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:03.352Z,1528863123.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:03.740Z,1528863123.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:04.117Z,1528863124.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:04.520Z,1528863124.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:04.902Z,1528863124.902 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:04.902Z,1528863124.902 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2018-06-13T04:12:04.902Z,1528863124.902 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:12:04.904Z,1528863124.904 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:04.904Z,1528863124.904 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-06-13T04:12:04.904Z,1528863124.904 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:12:04.918Z,1528863124.918 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:04.918Z,1528863124.918 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-06-13T04:12:04.918Z,1528863124.918 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:12:05.009Z,1528863125.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:12:05.009Z,1528863125.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:12:05.009Z,1528863125.009 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:12:05.390Z,1528863125.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:12:05.390Z,1528863125.390 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2018-06-13T04:12:05.390Z,1528863125.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:12:05.390Z,1528863125.390 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-06-13T04:12:05.391Z,1528863125.391 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:12:05.391Z,1528863125.391 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-06-13T04:12:05.718Z,1528863125.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:12:05.719Z,1528863125.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:12:05.719Z,1528863125.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:12:05.719Z,1528863125.719 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:12:05.720Z,1528863125.720 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:12:05.720Z,1528863125.720 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:12:05.720Z,1528863125.720 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:12:05.737Z,1528863125.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:12:05.737Z,1528863125.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:12:06.120Z,1528863126.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:12:06.121Z,1528863126.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:06.541Z,1528863126.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:12:06.542Z,1528863126.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:06.906Z,1528863126.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:12:06.907Z,1528863126.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:07.314Z,1528863127.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:12:07.315Z,1528863127.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:07.718Z,1528863127.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:12:07.719Z,1528863127.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:08.121Z,1528863128.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:12:08.122Z,1528863128.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:08.521Z,1528863128.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:12:08.523Z,1528863128.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:08.922Z,1528863128.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:12:08.923Z,1528863128.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:09.324Z,1528863129.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:12:09.325Z,1528863129.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:09.754Z,1528863129.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T04:12:09.755Z,1528863129.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:10.116Z,1528863130.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:12:10.117Z,1528863130.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:10.519Z,1528863130.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:12:10.520Z,1528863130.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:10.923Z,1528863130.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:12:10.924Z,1528863130.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:11.305Z,1528863131.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:12:11.306Z,1528863131.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:11.720Z,1528863131.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:12:11.721Z,1528863131.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:12.127Z,1528863132.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:12:12.128Z,1528863132.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:12.520Z,1528863132.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:12:12.521Z,1528863132.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:12.909Z,1528863132.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:12:12.910Z,1528863132.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:13.317Z,1528863133.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:12:13.318Z,1528863133.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:13.720Z,1528863133.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:12:13.722Z,1528863133.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:14.129Z,1528863134.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:12:14.130Z,1528863134.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:14.557Z,1528863134.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T04:12:14.558Z,1528863134.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:17.627Z,1528863137.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-06-13T04:12:17.628Z,1528863137.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:17.783Z,1528863137.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T04:12:17.784Z,1528863137.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:18.187Z,1528863138.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T04:12:18.188Z,1528863138.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:18.613Z,1528863138.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T04:12:18.614Z,1528863138.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:18.987Z,1528863138.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T04:12:18.987Z,1528863138.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:19.393Z,1528863139.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T04:12:19.394Z,1528863139.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:19.776Z,1528863139.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T04:12:19.778Z,1528863139.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:20.180Z,1528863140.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T04:12:20.181Z,1528863140.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:20.585Z,1528863140.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T04:12:20.586Z,1528863140.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:20.995Z,1528863140.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T04:12:20.996Z,1528863140.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:21.391Z,1528863141.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T04:12:21.392Z,1528863141.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:21.800Z,1528863141.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T04:12:21.801Z,1528863141.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:22.183Z,1528863142.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T04:12:22.184Z,1528863142.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:22.592Z,1528863142.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T04:12:22.598Z,1528863142.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:22.984Z,1528863142.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T04:12:22.989Z,1528863142.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:23.387Z,1528863143.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T04:12:23.387Z,1528863143.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:23.790Z,1528863143.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T04:12:23.791Z,1528863143.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:24.204Z,1528863144.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T04:12:24.209Z,1528863144.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:24.588Z,1528863144.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T04:12:24.588Z,1528863144.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:24.987Z,1528863144.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:25.393Z,1528863145.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:25.800Z,1528863145.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:26.200Z,1528863146.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:26.600Z,1528863146.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:27.002Z,1528863147.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:27.398Z,1528863147.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:27.800Z,1528863147.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:28.176Z,1528863148.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:28.575Z,1528863148.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:29.004Z,1528863149.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:29.404Z,1528863149.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:29.804Z,1528863149.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:30.208Z,1528863150.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:30.601Z,1528863150.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:30.977Z,1528863150.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:31.375Z,1528863151.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:31.775Z,1528863151.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:32.198Z,1528863152.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:32.576Z,1528863152.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:33.002Z,1528863153.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:33.399Z,1528863153.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:33.811Z,1528863153.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:34.200Z,1528863154.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:34.600Z,1528863154.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:34.980Z,1528863154.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:35.398Z,1528863155.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:35.781Z,1528863155.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:36.182Z,1528863156.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:36.576Z,1528863156.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:37.002Z,1528863157.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:37.381Z,1528863157.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:37.780Z,1528863157.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:38.177Z,1528863158.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:38.605Z,1528863158.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:39.007Z,1528863159.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:39.392Z,1528863159.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:39.786Z,1528863159.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:40.208Z,1528863160.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:40.584Z,1528863160.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:40.981Z,1528863160.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:41.378Z,1528863161.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:41.809Z,1528863161.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:42.189Z,1528863162.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:42.585Z,1528863162.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:42.980Z,1528863162.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:43.411Z,1528863163.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:43.775Z,1528863163.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:44.182Z,1528863164.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:44.581Z,1528863164.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:45.009Z,1528863165.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:45.388Z,1528863165.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:45.788Z,1528863165.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:46.192Z,1528863166.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:46.611Z,1528863166.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:46.990Z,1528863166.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:47.382Z,1528863167.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:47.786Z,1528863167.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:48.221Z,1528863168.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:48.589Z,1528863168.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:48.976Z,1528863168.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:49.382Z,1528863169.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:49.771Z,1528863169.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:50.175Z,1528863170.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:50.584Z,1528863170.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:50.988Z,1528863170.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:51.412Z,1528863171.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:51.785Z,1528863171.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:52.172Z,1528863172.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:52.581Z,1528863172.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:52.979Z,1528863172.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:53.372Z,1528863173.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:53.815Z,1528863173.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:54.190Z,1528863174.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:54.584Z,1528863174.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:54.977Z,1528863174.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:55.376Z,1528863175.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:55.773Z,1528863175.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:56.179Z,1528863176.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:56.580Z,1528863176.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:56.986Z,1528863176.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:57.392Z,1528863177.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:57.786Z,1528863177.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:58.183Z,1528863178.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:58.578Z,1528863178.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:58.986Z,1528863178.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:59.380Z,1528863179.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:12:59.792Z,1528863179.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:00.191Z,1528863180.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:00.583Z,1528863180.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:00.979Z,1528863180.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:01.378Z,1528863181.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:01.786Z,1528863181.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:02.195Z,1528863182.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:02.589Z,1528863182.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:02.974Z,1528863182.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:03.376Z,1528863183.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:03.796Z,1528863183.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:04.185Z,1528863184.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:04.583Z,1528863184.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:04.980Z,1528863184.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:05.364Z,1528863185.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:05.796Z,1528863185.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:06.195Z,1528863186.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:06.587Z,1528863186.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:06.965Z,1528863186.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:07.372Z,1528863187.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:07.794Z,1528863187.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:08.191Z,1528863188.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:08.593Z,1528863188.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:08.972Z,1528863188.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:09.372Z,1528863189.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:09.779Z,1528863189.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:10.183Z,1528863190.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:10.579Z,1528863190.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:10.975Z,1528863190.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:11.380Z,1528863191.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:11.785Z,1528863191.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:12.182Z,1528863192.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:12.583Z,1528863192.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:12.976Z,1528863192.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:13.376Z,1528863193.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:13.784Z,1528863193.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:14.187Z,1528863194.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:14.584Z,1528863194.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:14.975Z,1528863194.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:15.377Z,1528863195.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:15.788Z,1528863195.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:16.192Z,1528863196.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:16.585Z,1528863196.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:16.976Z,1528863196.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:17.384Z,1528863197.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:20.520Z,1528863200.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:20.688Z,1528863200.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:21.081Z,1528863201.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:21.476Z,1528863201.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:21.877Z,1528863201.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:22.284Z,1528863202.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:22.676Z,1528863202.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:23.074Z,1528863203.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:23.480Z,1528863203.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:23.894Z,1528863203.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:24.270Z,1528863204.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:24.669Z,1528863204.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:25.080Z,1528863205.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:25.471Z,1528863205.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:25.878Z,1528863205.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:26.278Z,1528863206.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:26.678Z,1528863206.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:27.072Z,1528863207.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:27.483Z,1528863207.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:27.871Z,1528863207.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:28.284Z,1528863208.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:28.683Z,1528863208.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:29.082Z,1528863209.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:29.480Z,1528863209.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:29.892Z,1528863209.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:30.278Z,1528863210.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:30.660Z,1528863210.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:31.064Z,1528863211.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:31.485Z,1528863211.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:31.889Z,1528863211.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:32.296Z,1528863212.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:32.668Z,1528863212.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:33.090Z,1528863213.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:33.468Z,1528863213.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:33.865Z,1528863213.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:34.277Z,1528863214.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:34.687Z,1528863214.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:35.073Z,1528863215.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:35.473Z,1528863215.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:35.873Z,1528863215.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:36.295Z,1528863216.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:36.671Z,1528863216.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:37.070Z,1528863217.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:37.465Z,1528863217.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:37.896Z,1528863217.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:38.277Z,1528863218.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:38.672Z,1528863218.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:39.067Z,1528863219.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:39.495Z,1528863219.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:39.860Z,1528863219.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:40.271Z,1528863220.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:40.668Z,1528863220.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:41.094Z,1528863221.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:41.476Z,1528863221.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:41.876Z,1528863221.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:42.266Z,1528863222.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:42.699Z,1528863222.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:43.072Z,1528863223.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:43.467Z,1528863223.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:43.874Z,1528863223.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:44.299Z,1528863224.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:44.670Z,1528863224.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:45.070Z,1528863225.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:45.474Z,1528863225.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:45.876Z,1528863225.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:46.264Z,1528863226.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:46.682Z,1528863226.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:47.074Z,1528863227.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:47.499Z,1528863227.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:47.876Z,1528863227.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:48.260Z,1528863228.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:48.670Z,1528863228.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:49.071Z,1528863229.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:49.468Z,1528863229.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:49.879Z,1528863229.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:50.282Z,1528863230.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:50.704Z,1528863230.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:51.064Z,1528863231.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:51.464Z,1528863231.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:51.862Z,1528863231.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:52.268Z,1528863232.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:52.697Z,1528863232.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:53.069Z,1528863233.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:53.481Z,1528863233.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:53.877Z,1528863233.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:54.268Z,1528863234.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:54.662Z,1528863234.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:55.076Z,1528863235.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:55.461Z,1528863235.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:55.869Z,1528863235.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:56.279Z,1528863236.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:56.671Z,1528863236.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:57.065Z,1528863237.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:57.468Z,1528863237.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:57.882Z,1528863237.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:58.286Z,1528863238.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:58.678Z,1528863238.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:59.070Z,1528863239.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:59.463Z,1528863239.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:13:59.883Z,1528863239.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:00.273Z,1528863240.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:00.672Z,1528863240.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:01.068Z,1528863241.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:01.469Z,1528863241.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:01.869Z,1528863241.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:02.290Z,1528863242.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:02.673Z,1528863242.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:03.065Z,1528863243.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:03.467Z,1528863243.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:03.876Z,1528863243.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:04.280Z,1528863244.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:04.679Z,1528863244.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:05.070Z,1528863245.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:05.468Z,1528863245.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:05.878Z,1528863245.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:06.275Z,1528863246.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:06.678Z,1528863246.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:07.071Z,1528863247.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:07.476Z,1528863247.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:07.874Z,1528863247.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:08.279Z,1528863248.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:08.680Z,1528863248.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:09.078Z,1528863249.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:09.468Z,1528863249.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:09.876Z,1528863249.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:10.284Z,1528863250.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:10.682Z,1528863250.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:11.053Z,1528863251.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:11.456Z,1528863251.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:11.882Z,1528863251.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:12.279Z,1528863252.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:12.683Z,1528863252.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:13.060Z,1528863253.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:13.456Z,1528863253.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:13.892Z,1528863253.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:14.291Z,1528863254.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:14.688Z,1528863254.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:17.794Z,1528863257.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:17.798Z,1528863257.798 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T04:09:17.4Z
2018-06-13T04:14:17.798Z,1528863257.798 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T04:14:17.798Z,1528863257.798 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T04:14:17.948Z,1528863257.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:19.107Z,1528863259.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:19.268Z,1528863259.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:19.653Z,1528863259.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:20.047Z,1528863260.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:20.445Z,1528863260.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:20.857Z,1528863260.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:21.259Z,1528863261.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:24.396Z,1528863264.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:24.560Z,1528863264.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:24.942Z,1528863264.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:25.342Z,1528863265.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:25.741Z,1528863265.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:26.152Z,1528863266.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:29.257Z,1528863269.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:29.345Z,1528863269.345 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0020.lzma
2018-06-13T04:14:29.431Z,1528863269.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:29.800Z,1528863269.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:30.146Z,1528863270.146 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0020.lzma.bak
2018-06-13T04:14:30.185Z,1528863270.185 [DataOverHttps](INFO): SBD MOMSN=8328548
2018-06-13T04:14:30.258Z,1528863270.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:32.095Z,1528863272.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:32.261Z,1528863272.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:32.653Z,1528863272.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:35.756Z,1528863275.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:35.902Z,1528863275.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:36.292Z,1528863276.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:36.700Z,1528863276.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:37.098Z,1528863277.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:37.497Z,1528863277.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:40.610Z,1528863280.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:40.693Z,1528863280.693 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0021.lzma
2018-06-13T04:14:40.776Z,1528863280.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:41.162Z,1528863281.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:41.494Z,1528863281.494 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0021.lzma.bak
2018-06-13T04:14:41.494Z,1528863281.494 [DataOverHttps](INFO): SBD MOMSN=8328554
2018-06-13T04:14:41.574Z,1528863281.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:43.460Z,1528863283.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:43.464Z,1528863283.464 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T04:14:43.464Z,1528863283.464 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T04:14:43.464Z,1528863283.464 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T04:14:43.608Z,1528863283.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:47.428Z,1528863287.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:47.615Z,1528863287.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:48.009Z,1528863288.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:48.405Z,1528863288.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:48.800Z,1528863288.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:49.215Z,1528863289.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:49.598Z,1528863289.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:50.008Z,1528863290.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:50.408Z,1528863290.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:50.811Z,1528863290.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:51.196Z,1528863291.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:51.599Z,1528863291.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:52.004Z,1528863292.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:52.397Z,1528863292.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:52.796Z,1528863292.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:53.252Z,1528863293.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:53.609Z,1528863293.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:54.019Z,1528863294.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:54.405Z,1528863294.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:54.802Z,1528863294.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:55.210Z,1528863295.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:55.599Z,1528863295.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:56.003Z,1528863296.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:56.412Z,1528863296.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:56.815Z,1528863296.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:57.203Z,1528863297.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:57.595Z,1528863297.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.392226 seconds old.
2018-06-13T04:14:57.596Z,1528863297.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:57.597Z,1528863297.597 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.392821 seconds old.
2018-06-13T04:14:57.598Z,1528863297.598 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.393055 seconds old.
2018-06-13T04:14:58.002Z,1528863298.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.798984 seconds old.
2018-06-13T04:14:58.003Z,1528863298.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:58.004Z,1528863298.004 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.799583 seconds old.
2018-06-13T04:14:58.006Z,1528863298.006 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.799735 seconds old.
2018-06-13T04:14:58.403Z,1528863298.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:58.808Z,1528863298.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:59.251Z,1528863299.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:14:59.620Z,1528863299.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:00.012Z,1528863300.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:00.407Z,1528863300.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:00.799Z,1528863300.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:01.209Z,1528863301.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:01.606Z,1528863301.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:02.009Z,1528863302.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:02.418Z,1528863302.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:02.832Z,1528863302.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:03.215Z,1528863303.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:03.595Z,1528863303.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:04.010Z,1528863304.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:04.389Z,1528863304.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:04.787Z,1528863304.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:05.219Z,1528863305.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:05.617Z,1528863305.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:06.021Z,1528863306.021 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:06.022Z,1528863306.022 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2018-06-13T04:15:06.022Z,1528863306.022 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:15:06.023Z,1528863306.023 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:06.023Z,1528863306.023 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-06-13T04:15:06.023Z,1528863306.023 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:15:06.025Z,1528863306.025 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:06.025Z,1528863306.025 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-06-13T04:15:06.026Z,1528863306.026 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:15:06.101Z,1528863306.101 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:15:06.101Z,1528863306.101 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:15:06.102Z,1528863306.102 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:15:06.501Z,1528863306.501 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:15:06.501Z,1528863306.501 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2018-06-13T04:15:06.502Z,1528863306.502 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:15:06.502Z,1528863306.502 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-06-13T04:15:06.502Z,1528863306.502 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:15:06.502Z,1528863306.502 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-06-13T04:15:06.789Z,1528863306.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:15:06.790Z,1528863306.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:15:06.791Z,1528863306.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:15:06.791Z,1528863306.791 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:15:06.792Z,1528863306.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:15:06.793Z,1528863306.793 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:15:06.794Z,1528863306.794 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:15:06.795Z,1528863306.795 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:15:06.795Z,1528863306.795 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:15:07.198Z,1528863307.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:15:07.199Z,1528863307.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:07.598Z,1528863307.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:15:07.599Z,1528863307.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:08.008Z,1528863308.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:15:08.009Z,1528863308.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:08.410Z,1528863308.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:15:08.411Z,1528863308.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:08.821Z,1528863308.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:15:08.822Z,1528863308.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:09.208Z,1528863309.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:15:09.209Z,1528863309.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:09.611Z,1528863309.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:15:09.612Z,1528863309.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:10.010Z,1528863310.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:15:10.011Z,1528863310.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:10.391Z,1528863310.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:15:10.392Z,1528863310.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:10.792Z,1528863310.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:15:10.793Z,1528863310.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:11.199Z,1528863311.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:15:11.200Z,1528863311.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:11.621Z,1528863311.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:15:11.622Z,1528863311.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:12.001Z,1528863312.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:15:12.002Z,1528863312.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:12.392Z,1528863312.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:15:12.393Z,1528863312.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:12.788Z,1528863312.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:15:12.789Z,1528863312.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:13.214Z,1528863313.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:15:13.215Z,1528863313.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:13.603Z,1528863313.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:15:13.603Z,1528863313.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:13.996Z,1528863313.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:15:13.997Z,1528863313.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:14.400Z,1528863314.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:15:14.402Z,1528863314.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:14.804Z,1528863314.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:15:14.806Z,1528863314.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:15.200Z,1528863315.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:15:15.202Z,1528863315.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:15.596Z,1528863315.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:15:15.597Z,1528863315.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:15.995Z,1528863315.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:15:15.996Z,1528863315.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:16.391Z,1528863316.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:15:16.392Z,1528863316.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:16.796Z,1528863316.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:15:16.798Z,1528863316.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:17.203Z,1528863317.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:15:17.204Z,1528863317.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:17.599Z,1528863317.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:15:17.600Z,1528863317.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:18.001Z,1528863318.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:15:18.002Z,1528863318.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:18.392Z,1528863318.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:15:18.393Z,1528863318.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:18.796Z,1528863318.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:15:18.801Z,1528863318.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:19.205Z,1528863319.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:15:19.206Z,1528863319.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:19.600Z,1528863319.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:15:19.601Z,1528863319.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:20.007Z,1528863320.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:15:20.008Z,1528863320.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:20.405Z,1528863320.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:15:20.406Z,1528863320.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:20.805Z,1528863320.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:15:20.806Z,1528863320.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:21.198Z,1528863321.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:15:21.198Z,1528863321.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:21.593Z,1528863321.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:15:21.594Z,1528863321.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:22.005Z,1528863322.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:15:22.006Z,1528863322.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:22.399Z,1528863322.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:15:22.400Z,1528863322.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:22.802Z,1528863322.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:15:22.803Z,1528863322.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:23.194Z,1528863323.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:15:23.195Z,1528863323.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:23.597Z,1528863323.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:15:23.598Z,1528863323.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:24.001Z,1528863324.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:15:24.002Z,1528863324.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:24.411Z,1528863324.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:15:24.412Z,1528863324.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:24.815Z,1528863324.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:15:24.816Z,1528863324.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:25.192Z,1528863325.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:15:25.193Z,1528863325.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:25.586Z,1528863325.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:15:25.587Z,1528863325.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:25.991Z,1528863325.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T04:15:25.992Z,1528863325.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:26.491Z,1528863326.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:26.866Z,1528863326.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:27.189Z,1528863327.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:27.592Z,1528863327.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:28.001Z,1528863328.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:28.404Z,1528863328.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:28.802Z,1528863328.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:29.196Z,1528863329.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:29.592Z,1528863329.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:30.000Z,1528863330.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:30.408Z,1528863330.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:30.802Z,1528863330.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:31.193Z,1528863331.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:31.594Z,1528863331.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:32.005Z,1528863332.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:32.404Z,1528863332.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:32.802Z,1528863332.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:33.193Z,1528863333.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:33.593Z,1528863333.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:34.005Z,1528863334.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:34.405Z,1528863334.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:34.801Z,1528863334.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:35.203Z,1528863335.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:35.602Z,1528863335.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:36.001Z,1528863336.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:36.402Z,1528863336.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:36.801Z,1528863336.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:37.197Z,1528863337.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:37.601Z,1528863337.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:38.005Z,1528863338.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:38.407Z,1528863338.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:38.802Z,1528863338.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:39.201Z,1528863339.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:39.598Z,1528863339.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:40.006Z,1528863340.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:40.408Z,1528863340.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:40.804Z,1528863340.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:41.200Z,1528863341.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:41.599Z,1528863341.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:42.002Z,1528863342.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:42.404Z,1528863342.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:42.805Z,1528863342.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:43.210Z,1528863343.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:43.599Z,1528863343.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:44.013Z,1528863344.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:47.115Z,1528863347.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:47.297Z,1528863347.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:47.694Z,1528863347.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:48.074Z,1528863348.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:48.472Z,1528863348.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:48.876Z,1528863348.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:49.303Z,1528863349.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:49.680Z,1528863349.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:50.076Z,1528863350.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:50.471Z,1528863350.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:50.897Z,1528863350.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:51.271Z,1528863351.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:51.672Z,1528863351.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:52.074Z,1528863352.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:52.503Z,1528863352.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:52.904Z,1528863352.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:53.270Z,1528863353.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:53.670Z,1528863353.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:54.100Z,1528863354.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:54.466Z,1528863354.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:54.870Z,1528863354.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:55.300Z,1528863355.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:55.701Z,1528863355.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:56.078Z,1528863356.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:56.473Z,1528863356.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:56.869Z,1528863356.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:57.269Z,1528863357.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:57.678Z,1528863357.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:58.083Z,1528863358.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:58.479Z,1528863358.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:58.904Z,1528863358.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:59.265Z,1528863359.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:15:59.670Z,1528863359.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:00.074Z,1528863360.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:00.465Z,1528863360.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:00.871Z,1528863360.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:01.293Z,1528863361.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:01.682Z,1528863361.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:02.103Z,1528863362.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:02.472Z,1528863362.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:02.870Z,1528863362.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:03.275Z,1528863363.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:03.690Z,1528863363.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:04.074Z,1528863364.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:04.501Z,1528863364.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:04.883Z,1528863364.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:05.264Z,1528863365.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:05.669Z,1528863365.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:06.068Z,1528863366.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:06.464Z,1528863366.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:06.867Z,1528863366.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:07.284Z,1528863367.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:07.676Z,1528863367.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:08.080Z,1528863368.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:08.468Z,1528863368.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:08.864Z,1528863368.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:09.267Z,1528863369.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:09.672Z,1528863369.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:10.076Z,1528863370.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:10.484Z,1528863370.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:10.881Z,1528863370.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:11.266Z,1528863371.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:11.676Z,1528863371.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:12.078Z,1528863372.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:12.469Z,1528863372.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:12.868Z,1528863372.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:13.282Z,1528863373.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:13.676Z,1528863373.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:14.077Z,1528863374.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:14.474Z,1528863374.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:14.868Z,1528863374.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:15.278Z,1528863375.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:15.680Z,1528863375.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:16.079Z,1528863376.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:16.483Z,1528863376.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:16.886Z,1528863376.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:17.258Z,1528863377.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:17.664Z,1528863377.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:18.089Z,1528863378.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:18.486Z,1528863378.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:18.890Z,1528863378.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:19.265Z,1528863379.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:19.663Z,1528863379.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:20.094Z,1528863380.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:20.475Z,1528863380.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:20.871Z,1528863380.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:21.265Z,1528863381.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:21.667Z,1528863381.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:22.069Z,1528863382.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:22.475Z,1528863382.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:22.875Z,1528863382.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:23.263Z,1528863383.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:23.666Z,1528863383.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:24.076Z,1528863384.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:24.476Z,1528863384.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:24.876Z,1528863384.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:25.272Z,1528863385.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:25.663Z,1528863385.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:26.075Z,1528863386.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:26.478Z,1528863386.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:26.879Z,1528863386.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:27.272Z,1528863387.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:27.684Z,1528863387.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:28.078Z,1528863388.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:28.481Z,1528863388.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:28.883Z,1528863388.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:29.269Z,1528863389.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:29.669Z,1528863389.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:30.088Z,1528863390.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:30.477Z,1528863390.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:30.878Z,1528863390.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:31.272Z,1528863391.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:31.674Z,1528863391.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:32.077Z,1528863392.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:32.482Z,1528863392.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:32.873Z,1528863392.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:33.269Z,1528863393.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:33.676Z,1528863393.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:34.073Z,1528863394.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:34.481Z,1528863394.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:34.888Z,1528863394.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:35.274Z,1528863395.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:35.675Z,1528863395.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:36.085Z,1528863396.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:36.480Z,1528863396.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:36.877Z,1528863396.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:37.273Z,1528863397.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:37.656Z,1528863397.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:38.079Z,1528863398.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:38.482Z,1528863398.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:38.879Z,1528863398.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:39.281Z,1528863399.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:39.668Z,1528863399.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:40.071Z,1528863400.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:40.492Z,1528863400.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:40.876Z,1528863400.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:41.268Z,1528863401.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:41.666Z,1528863401.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:42.076Z,1528863402.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:42.473Z,1528863402.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:42.876Z,1528863402.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:43.270Z,1528863403.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:43.667Z,1528863403.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:44.076Z,1528863404.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:44.479Z,1528863404.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:44.876Z,1528863404.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:45.271Z,1528863405.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:48.409Z,1528863408.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:48.576Z,1528863408.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:48.969Z,1528863408.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:49.367Z,1528863409.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:49.763Z,1528863409.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:50.152Z,1528863410.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:50.567Z,1528863410.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:50.957Z,1528863410.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:51.369Z,1528863411.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:51.766Z,1528863411.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:52.169Z,1528863412.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:52.539Z,1528863412.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:52.939Z,1528863412.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:53.342Z,1528863413.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:53.739Z,1528863413.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:54.147Z,1528863414.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:54.552Z,1528863414.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:54.947Z,1528863414.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:55.344Z,1528863415.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:55.740Z,1528863415.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:56.152Z,1528863416.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:56.543Z,1528863416.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:56.940Z,1528863416.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:57.354Z,1528863417.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:57.758Z,1528863417.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:58.153Z,1528863418.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:58.544Z,1528863418.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:58.946Z,1528863418.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:59.341Z,1528863419.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:16:59.744Z,1528863419.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:00.169Z,1528863420.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:00.554Z,1528863420.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:00.958Z,1528863420.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:01.363Z,1528863421.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:01.757Z,1528863421.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:02.155Z,1528863422.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:02.566Z,1528863422.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:02.964Z,1528863422.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:03.353Z,1528863423.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:03.736Z,1528863423.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:04.171Z,1528863424.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:04.562Z,1528863424.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:04.968Z,1528863424.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:05.344Z,1528863425.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:05.744Z,1528863425.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:06.151Z,1528863426.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:06.551Z,1528863426.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:06.948Z,1528863426.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:07.343Z,1528863427.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:07.742Z,1528863427.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:08.155Z,1528863428.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:08.556Z,1528863428.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:08.952Z,1528863428.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:09.344Z,1528863429.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:09.744Z,1528863429.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:10.152Z,1528863430.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:10.551Z,1528863430.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:10.960Z,1528863430.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:11.343Z,1528863431.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:11.747Z,1528863431.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:12.160Z,1528863432.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:12.556Z,1528863432.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:12.951Z,1528863432.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:13.345Z,1528863433.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:13.749Z,1528863433.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:14.152Z,1528863434.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:14.552Z,1528863434.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:14.952Z,1528863434.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:15.346Z,1528863435.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:15.746Z,1528863435.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:16.153Z,1528863436.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:16.557Z,1528863436.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:16.957Z,1528863436.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:17.344Z,1528863437.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:17.744Z,1528863437.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:18.156Z,1528863438.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:18.557Z,1528863438.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:18.956Z,1528863438.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:19.349Z,1528863439.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:19.740Z,1528863439.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:20.102Z,1528863440.102 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T04:17:20.103Z,1528863440.103 [NAL9602] Data Fault, FailCount= 5
2018-06-13T04:17:20.103Z,1528863440.103 [NAL9602](ERROR): Data Fault
2018-06-13T04:17:20.163Z,1528863440.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:20.257Z,1528863440.257 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T04:17:20.258Z,1528863440.258 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T04:17:20.502Z,1528863440.502 [NAL9602](INFO): Powering down
2018-06-13T04:17:20.550Z,1528863440.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:20.624Z,1528863440.624 [CBIT](INFO): Critical error at 20180613T041720
2018-06-13T04:17:20.942Z,1528863440.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:21.348Z,1528863441.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:21.739Z,1528863441.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:22.142Z,1528863442.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:22.538Z,1528863442.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:22.948Z,1528863442.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:23.344Z,1528863443.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:23.751Z,1528863443.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:24.142Z,1528863444.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:24.544Z,1528863444.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:24.944Z,1528863444.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:25.343Z,1528863445.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:25.740Z,1528863445.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:26.145Z,1528863446.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:26.546Z,1528863446.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:26.948Z,1528863446.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:27.344Z,1528863447.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:27.755Z,1528863447.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:28.152Z,1528863448.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:28.544Z,1528863448.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:28.945Z,1528863448.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:29.340Z,1528863449.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:29.752Z,1528863449.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:30.157Z,1528863450.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:30.532Z,1528863450.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:30.956Z,1528863450.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:31.332Z,1528863451.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:31.732Z,1528863451.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:32.144Z,1528863452.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:32.538Z,1528863452.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:32.937Z,1528863452.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:33.339Z,1528863453.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:33.744Z,1528863453.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:34.137Z,1528863454.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:34.539Z,1528863454.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:34.939Z,1528863454.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:35.338Z,1528863455.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:35.739Z,1528863455.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:36.138Z,1528863456.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:36.538Z,1528863456.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:36.939Z,1528863456.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:37.344Z,1528863457.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:37.738Z,1528863457.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:38.143Z,1528863458.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:38.544Z,1528863458.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:38.937Z,1528863458.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:39.339Z,1528863459.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:39.739Z,1528863459.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:40.136Z,1528863460.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:40.539Z,1528863460.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:40.938Z,1528863460.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:41.337Z,1528863461.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:41.740Z,1528863461.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:42.144Z,1528863462.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:42.539Z,1528863462.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:42.944Z,1528863462.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:43.344Z,1528863463.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:43.737Z,1528863463.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:44.143Z,1528863464.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:47.248Z,1528863467.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:47.440Z,1528863467.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:47.820Z,1528863467.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:48.222Z,1528863468.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:48.616Z,1528863468.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:49.023Z,1528863469.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:49.404Z,1528863469.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:49.804Z,1528863469.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:50.235Z,1528863470.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:50.609Z,1528863470.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:51.007Z,1528863471.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:51.412Z,1528863471.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:51.807Z,1528863471.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:52.209Z,1528863472.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:52.612Z,1528863472.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:53.011Z,1528863473.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:53.412Z,1528863473.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:53.812Z,1528863473.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:54.211Z,1528863474.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:54.610Z,1528863474.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:55.012Z,1528863475.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:55.411Z,1528863475.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:55.809Z,1528863475.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:56.212Z,1528863476.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:56.615Z,1528863476.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:57.009Z,1528863477.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:57.439Z,1528863477.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:57.811Z,1528863477.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:58.211Z,1528863478.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:58.611Z,1528863478.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:59.013Z,1528863479.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:59.414Z,1528863479.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:17:59.821Z,1528863479.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:00.215Z,1528863480.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:00.614Z,1528863480.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:01.014Z,1528863481.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:01.414Z,1528863481.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:01.810Z,1528863481.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:02.215Z,1528863482.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:02.613Z,1528863482.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:03.010Z,1528863483.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:03.445Z,1528863483.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:03.813Z,1528863483.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:04.211Z,1528863484.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:04.614Z,1528863484.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:05.014Z,1528863485.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:05.414Z,1528863485.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:05.814Z,1528863485.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:06.215Z,1528863486.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:06.614Z,1528863486.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:07.018Z,1528863487.018 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:07.018Z,1528863487.018 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2018-06-13T04:18:07.019Z,1528863487.019 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:18:07.020Z,1528863487.020 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:07.020Z,1528863487.020 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-06-13T04:18:07.020Z,1528863487.020 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:18:07.022Z,1528863487.022 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:07.022Z,1528863487.022 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-06-13T04:18:07.023Z,1528863487.023 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:18:07.105Z,1528863487.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:18:07.105Z,1528863487.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:18:07.106Z,1528863487.106 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:18:07.509Z,1528863487.509 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:18:07.509Z,1528863487.509 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2018-06-13T04:18:07.510Z,1528863487.510 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:18:07.510Z,1528863487.510 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-06-13T04:18:07.510Z,1528863487.510 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:18:07.510Z,1528863487.510 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-06-13T04:18:07.811Z,1528863487.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:18:07.812Z,1528863487.812 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:18:07.812Z,1528863487.812 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:18:07.812Z,1528863487.812 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:18:07.813Z,1528863487.813 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:18:07.813Z,1528863487.813 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:18:07.813Z,1528863487.813 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:18:07.814Z,1528863487.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:18:07.814Z,1528863487.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:18:08.222Z,1528863488.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:18:08.223Z,1528863488.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:08.623Z,1528863488.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:18:08.624Z,1528863488.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:09.023Z,1528863489.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:18:09.024Z,1528863489.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:09.420Z,1528863489.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:18:09.421Z,1528863489.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:09.824Z,1528863489.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:18:09.824Z,1528863489.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:10.215Z,1528863490.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:18:10.216Z,1528863490.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:10.621Z,1528863490.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:18:10.622Z,1528863490.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:11.024Z,1528863491.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:18:11.025Z,1528863491.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:11.412Z,1528863491.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:18:11.417Z,1528863491.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:11.828Z,1528863491.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:18:11.829Z,1528863491.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:12.204Z,1528863492.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:18:12.229Z,1528863492.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:12.625Z,1528863492.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:18:12.626Z,1528863492.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:13.008Z,1528863493.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:18:13.009Z,1528863493.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:13.408Z,1528863493.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:18:13.409Z,1528863493.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:13.807Z,1528863493.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:18:13.808Z,1528863493.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:14.213Z,1528863494.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:18:14.214Z,1528863494.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:14.607Z,1528863494.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:18:14.608Z,1528863494.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:15.007Z,1528863495.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:18:15.008Z,1528863495.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:15.416Z,1528863495.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:18:15.417Z,1528863495.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:15.811Z,1528863495.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:18:15.812Z,1528863495.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:16.243Z,1528863496.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:18:16.244Z,1528863496.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:16.624Z,1528863496.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:18:16.630Z,1528863496.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:17.013Z,1528863497.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:18:17.014Z,1528863497.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:17.413Z,1528863497.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:18:17.414Z,1528863497.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:17.813Z,1528863497.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:18:17.814Z,1528863497.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:18.213Z,1528863498.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:18:18.214Z,1528863498.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:18.615Z,1528863498.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:18:18.615Z,1528863498.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:19.013Z,1528863499.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:18:19.014Z,1528863499.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:19.413Z,1528863499.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:18:19.414Z,1528863499.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:19.809Z,1528863499.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:18:19.810Z,1528863499.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:20.214Z,1528863500.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:18:20.215Z,1528863500.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:20.614Z,1528863500.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:18:20.615Z,1528863500.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:21.009Z,1528863501.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:18:21.010Z,1528863501.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:21.414Z,1528863501.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:18:21.415Z,1528863501.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:21.813Z,1528863501.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:18:21.814Z,1528863501.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:22.223Z,1528863502.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:18:22.224Z,1528863502.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:22.613Z,1528863502.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:18:22.614Z,1528863502.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:23.013Z,1528863503.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:18:23.014Z,1528863503.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:23.415Z,1528863503.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:18:23.415Z,1528863503.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:23.813Z,1528863503.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:18:23.814Z,1528863503.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:24.214Z,1528863504.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:18:24.215Z,1528863504.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:24.613Z,1528863504.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:18:24.614Z,1528863504.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:25.013Z,1528863505.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:18:25.014Z,1528863505.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:25.414Z,1528863505.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:18:25.415Z,1528863505.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:25.809Z,1528863505.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:18:25.810Z,1528863505.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:26.214Z,1528863506.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:18:26.215Z,1528863506.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:26.609Z,1528863506.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:18:26.610Z,1528863506.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:27.009Z,1528863507.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T04:18:27.010Z,1528863507.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:27.414Z,1528863507.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:27.813Z,1528863507.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:28.217Z,1528863508.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:28.613Z,1528863508.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:29.013Z,1528863509.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:29.414Z,1528863509.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:29.814Z,1528863509.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:30.214Z,1528863510.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:30.614Z,1528863510.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:31.014Z,1528863511.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:31.413Z,1528863511.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:31.810Z,1528863511.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:32.215Z,1528863512.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:32.620Z,1528863512.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:33.011Z,1528863513.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:33.414Z,1528863513.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:33.814Z,1528863513.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:34.220Z,1528863514.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:34.622Z,1528863514.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:35.014Z,1528863515.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:35.411Z,1528863515.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:35.815Z,1528863515.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:36.219Z,1528863516.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:36.611Z,1528863516.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:37.016Z,1528863517.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:37.415Z,1528863517.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:37.811Z,1528863517.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:38.214Z,1528863518.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:38.620Z,1528863518.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:39.011Z,1528863519.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:39.414Z,1528863519.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:39.816Z,1528863519.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:40.211Z,1528863520.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:40.614Z,1528863520.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:41.014Z,1528863521.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:41.414Z,1528863521.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:41.828Z,1528863521.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:42.218Z,1528863522.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:42.612Z,1528863522.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:43.020Z,1528863523.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:43.420Z,1528863523.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:43.818Z,1528863523.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:44.220Z,1528863524.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:44.616Z,1528863524.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:45.012Z,1528863525.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:45.420Z,1528863525.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:45.818Z,1528863525.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:46.214Z,1528863526.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:46.616Z,1528863526.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:47.018Z,1528863527.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:47.414Z,1528863527.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:50.525Z,1528863530.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:50.680Z,1528863530.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:51.055Z,1528863531.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:51.457Z,1528863531.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:51.862Z,1528863531.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:52.258Z,1528863532.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:52.661Z,1528863532.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:53.052Z,1528863533.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:53.467Z,1528863533.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:53.840Z,1528863533.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:54.257Z,1528863534.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:54.674Z,1528863534.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:55.044Z,1528863535.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:55.465Z,1528863535.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:55.852Z,1528863535.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:56.248Z,1528863536.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:56.648Z,1528863536.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:57.048Z,1528863537.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:57.478Z,1528863537.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:57.841Z,1528863537.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:58.249Z,1528863538.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:58.647Z,1528863538.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:59.041Z,1528863539.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:59.448Z,1528863539.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:18:59.847Z,1528863539.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:00.244Z,1528863540.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:00.647Z,1528863540.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:01.047Z,1528863541.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:01.443Z,1528863541.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:01.847Z,1528863541.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:02.251Z,1528863542.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:02.643Z,1528863542.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:03.048Z,1528863543.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:03.447Z,1528863543.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:03.843Z,1528863543.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:04.251Z,1528863544.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:04.647Z,1528863544.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:05.046Z,1528863545.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:05.447Z,1528863545.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:05.847Z,1528863545.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:06.243Z,1528863546.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:06.647Z,1528863546.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:07.047Z,1528863547.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:07.443Z,1528863547.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:07.848Z,1528863547.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:08.247Z,1528863548.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:08.647Z,1528863548.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:09.048Z,1528863549.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:09.447Z,1528863549.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:09.843Z,1528863549.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:10.252Z,1528863550.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:10.643Z,1528863550.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:11.043Z,1528863551.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:11.447Z,1528863551.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:11.847Z,1528863551.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:12.243Z,1528863552.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:12.648Z,1528863552.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:13.047Z,1528863553.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:13.447Z,1528863553.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:13.848Z,1528863553.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:14.247Z,1528863554.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:14.648Z,1528863554.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:15.048Z,1528863555.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:15.447Z,1528863555.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:15.843Z,1528863555.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:16.252Z,1528863556.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:16.649Z,1528863556.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:17.043Z,1528863557.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:17.452Z,1528863557.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:17.848Z,1528863557.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:18.244Z,1528863558.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:18.672Z,1528863558.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:19.047Z,1528863559.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:19.448Z,1528863559.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:19.848Z,1528863559.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:20.248Z,1528863560.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:20.353Z,1528863560.353 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T04:19:20.353Z,1528863560.353 [NAL9602] No Fault, FailCount= 5
2018-06-13T04:19:20.609Z,1528863560.609 [NAL9602](INFO): Powering up NAL9602
2018-06-13T04:19:20.653Z,1528863560.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:21.048Z,1528863561.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:21.456Z,1528863561.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:21.847Z,1528863561.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:22.252Z,1528863562.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:22.647Z,1528863562.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:23.046Z,1528863563.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:23.448Z,1528863563.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:23.847Z,1528863563.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:24.249Z,1528863564.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:24.648Z,1528863564.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:25.047Z,1528863565.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:25.448Z,1528863565.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:25.848Z,1528863565.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:26.251Z,1528863566.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:26.647Z,1528863566.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:27.052Z,1528863567.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:27.447Z,1528863567.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:27.847Z,1528863567.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:28.252Z,1528863568.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:28.647Z,1528863568.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:29.047Z,1528863569.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:29.452Z,1528863569.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:29.847Z,1528863569.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:30.285Z,1528863570.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:30.652Z,1528863570.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:31.060Z,1528863571.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:31.419Z,1528863571.419 [NAL9602](INFO): NAL9602 initialized
2018-06-13T04:19:31.453Z,1528863571.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:31.852Z,1528863571.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:32.282Z,1528863572.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:32.678Z,1528863572.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:33.055Z,1528863573.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:33.452Z,1528863573.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:33.849Z,1528863573.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:34.252Z,1528863574.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:34.660Z,1528863574.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:35.079Z,1528863575.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:35.456Z,1528863575.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:35.862Z,1528863575.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:36.251Z,1528863576.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:36.653Z,1528863576.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:37.056Z,1528863577.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:37.457Z,1528863577.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:37.863Z,1528863577.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:38.268Z,1528863578.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:38.650Z,1528863578.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:39.052Z,1528863579.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:39.452Z,1528863579.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:39.856Z,1528863579.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:40.255Z,1528863580.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:40.675Z,1528863580.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:41.061Z,1528863581.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:41.461Z,1528863581.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:41.857Z,1528863581.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:42.255Z,1528863582.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:42.665Z,1528863582.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:43.061Z,1528863583.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:43.462Z,1528863583.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:43.869Z,1528863583.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:43.872Z,1528863583.872 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T04:19:43.872Z,1528863583.872 [Default:CheckIn:C.Wait] Stopped
2018-06-13T04:19:43.872Z,1528863583.872 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T04:19:43.872Z,1528863583.872 [Default:CheckIn:D] Running Loop=1
2018-06-13T04:19:44.276Z,1528863584.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:44.279Z,1528863584.279 [Default:CheckIn:D] Stopped
2018-06-13T04:19:44.279Z,1528863584.279 [Default:CheckIn:E] Running Loop=1
2018-06-13T04:19:47.368Z,1528863587.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:47.371Z,1528863587.371 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 52.513904 min 
2018-06-13T04:19:47.372Z,1528863587.372 [Default:CheckIn:E] Stopped
2018-06-13T04:19:47.372Z,1528863587.372 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T04:19:47.372Z,1528863587.372 [Default:CheckIn] Stopped
2018-06-13T04:19:47.372Z,1528863587.372 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T04:19:47.372Z,1528863587.372 [Default:CheckIn](INFO): Running loop #6
2018-06-13T04:19:47.372Z,1528863587.372 [Default:CheckIn] Running Loop=6
2018-06-13T04:19:47.372Z,1528863587.372 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T04:19:47.372Z,1528863587.372 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T04:19:47.520Z,1528863587.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:47.923Z,1528863587.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:48.318Z,1528863588.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:48.711Z,1528863588.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:49.092Z,1528863589.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:49.513Z,1528863589.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:49.916Z,1528863589.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:50.328Z,1528863590.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:50.715Z,1528863590.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:51.114Z,1528863591.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:51.492Z,1528863591.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:51.892Z,1528863591.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:52.322Z,1528863592.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:52.740Z,1528863592.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:53.119Z,1528863593.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:53.501Z,1528863593.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:53.924Z,1528863593.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:54.327Z,1528863594.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:54.711Z,1528863594.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:55.135Z,1528863595.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:55.502Z,1528863595.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:55.901Z,1528863595.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:56.311Z,1528863596.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:56.711Z,1528863596.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:57.107Z,1528863597.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:57.504Z,1528863597.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:57.899Z,1528863597.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:58.307Z,1528863598.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:58.711Z,1528863598.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:59.107Z,1528863599.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:59.508Z,1528863599.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:19:59.903Z,1528863599.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:00.304Z,1528863600.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:00.710Z,1528863600.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:01.111Z,1528863601.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:01.502Z,1528863601.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:01.908Z,1528863601.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:02.318Z,1528863602.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:02.712Z,1528863602.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:03.111Z,1528863603.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:03.511Z,1528863603.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:03.908Z,1528863603.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:04.304Z,1528863604.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:04.705Z,1528863604.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:05.101Z,1528863605.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:05.512Z,1528863605.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:05.916Z,1528863605.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:06.309Z,1528863606.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:06.699Z,1528863606.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:07.103Z,1528863607.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:07.500Z,1528863607.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:07.904Z,1528863607.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:08.314Z,1528863608.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:08.716Z,1528863608.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:09.116Z,1528863609.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:09.520Z,1528863609.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:09.902Z,1528863609.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:10.302Z,1528863610.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:10.705Z,1528863610.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:11.099Z,1528863611.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:11.511Z,1528863611.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:11.913Z,1528863611.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:12.311Z,1528863612.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:12.704Z,1528863612.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:13.105Z,1528863613.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:13.502Z,1528863613.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:13.908Z,1528863613.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:14.307Z,1528863614.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:14.713Z,1528863614.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:15.112Z,1528863615.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:15.513Z,1528863615.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:15.915Z,1528863615.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:16.314Z,1528863616.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:16.706Z,1528863616.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:17.101Z,1528863617.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:17.516Z,1528863617.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:17.914Z,1528863617.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:18.309Z,1528863618.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:18.712Z,1528863618.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:19.104Z,1528863619.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:19.501Z,1528863619.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:19.904Z,1528863619.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:20.299Z,1528863620.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:20.712Z,1528863620.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:21.117Z,1528863621.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:21.521Z,1528863621.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:21.900Z,1528863621.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:22.302Z,1528863622.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:22.704Z,1528863622.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:23.100Z,1528863623.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:23.516Z,1528863623.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:23.912Z,1528863623.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:24.309Z,1528863624.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:24.703Z,1528863624.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:25.103Z,1528863625.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:25.502Z,1528863625.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:25.903Z,1528863625.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:26.308Z,1528863626.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:26.709Z,1528863626.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:27.116Z,1528863627.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:27.512Z,1528863627.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:27.900Z,1528863627.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:28.308Z,1528863628.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:28.703Z,1528863628.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:29.100Z,1528863629.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:29.516Z,1528863629.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:29.912Z,1528863629.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:30.313Z,1528863630.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:30.702Z,1528863630.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:31.104Z,1528863631.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:31.502Z,1528863631.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:31.903Z,1528863631.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:32.304Z,1528863632.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:32.716Z,1528863632.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:33.120Z,1528863633.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:33.516Z,1528863633.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:33.902Z,1528863633.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:34.303Z,1528863634.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:34.703Z,1528863634.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:35.108Z,1528863635.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:35.511Z,1528863635.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:35.920Z,1528863635.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:36.316Z,1528863636.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:36.703Z,1528863636.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:37.103Z,1528863637.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:37.508Z,1528863637.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:37.905Z,1528863637.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:38.312Z,1528863638.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:38.712Z,1528863638.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:39.113Z,1528863639.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:39.520Z,1528863639.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:39.904Z,1528863639.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:40.306Z,1528863640.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:40.712Z,1528863640.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:41.103Z,1528863641.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:41.512Z,1528863641.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:41.916Z,1528863641.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:42.320Z,1528863642.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:42.718Z,1528863642.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:43.099Z,1528863643.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:43.503Z,1528863643.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:43.908Z,1528863643.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:44.308Z,1528863644.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:44.715Z,1528863644.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:45.115Z,1528863645.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:45.515Z,1528863645.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:48.617Z,1528863648.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:48.795Z,1528863648.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:49.196Z,1528863649.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:49.591Z,1528863649.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:49.968Z,1528863649.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:50.363Z,1528863650.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:50.763Z,1528863650.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:51.161Z,1528863651.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:51.571Z,1528863651.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:51.971Z,1528863651.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:52.367Z,1528863652.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:52.763Z,1528863652.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:53.164Z,1528863653.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:53.562Z,1528863653.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:53.973Z,1528863653.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:54.362Z,1528863654.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:54.772Z,1528863654.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:55.172Z,1528863655.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:55.584Z,1528863655.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:55.962Z,1528863655.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:56.364Z,1528863656.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:56.764Z,1528863656.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:57.164Z,1528863657.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:57.596Z,1528863657.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:57.980Z,1528863657.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:58.374Z,1528863658.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:58.767Z,1528863658.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:59.164Z,1528863659.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:59.577Z,1528863659.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:20:59.969Z,1528863659.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:00.372Z,1528863660.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:00.775Z,1528863660.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:01.184Z,1528863661.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:01.580Z,1528863661.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:01.965Z,1528863661.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:02.370Z,1528863662.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:02.766Z,1528863662.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:03.168Z,1528863663.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:03.578Z,1528863663.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:03.975Z,1528863663.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:04.385Z,1528863664.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:04.774Z,1528863664.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:05.152Z,1528863665.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:05.556Z,1528863665.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:05.980Z,1528863665.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:06.354Z,1528863666.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:06.784Z,1528863666.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:07.254Z,1528863667.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:07.583Z,1528863667.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:07.959Z,1528863667.959 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:07.960Z,1528863667.960 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2018-06-13T04:21:07.960Z,1528863667.960 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:21:07.962Z,1528863667.962 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:07.962Z,1528863667.962 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-06-13T04:21:07.962Z,1528863667.962 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:21:07.963Z,1528863667.963 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:07.964Z,1528863667.964 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-06-13T04:21:07.964Z,1528863667.964 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:21:08.065Z,1528863668.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:21:08.065Z,1528863668.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:21:08.065Z,1528863668.065 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:21:08.437Z,1528863668.437 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:21:08.437Z,1528863668.437 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2018-06-13T04:21:08.438Z,1528863668.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:21:08.438Z,1528863668.438 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-06-13T04:21:08.438Z,1528863668.438 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:21:08.438Z,1528863668.438 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-06-13T04:21:08.757Z,1528863668.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:21:08.757Z,1528863668.757 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:21:08.758Z,1528863668.758 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:21:08.758Z,1528863668.758 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:21:08.758Z,1528863668.758 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:21:08.759Z,1528863668.759 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:21:08.759Z,1528863668.759 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:21:08.759Z,1528863668.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:21:08.760Z,1528863668.760 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:21:09.159Z,1528863669.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:21:09.160Z,1528863669.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:09.571Z,1528863669.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:21:09.572Z,1528863669.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:09.972Z,1528863669.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:21:09.973Z,1528863669.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:10.372Z,1528863670.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:21:10.373Z,1528863670.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:10.763Z,1528863670.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:21:10.764Z,1528863670.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:11.159Z,1528863671.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:21:11.160Z,1528863671.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:11.563Z,1528863671.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:21:11.564Z,1528863671.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:11.965Z,1528863671.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:21:11.966Z,1528863671.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:12.362Z,1528863672.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:21:12.363Z,1528863672.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:12.767Z,1528863672.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:21:12.768Z,1528863672.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:13.175Z,1528863673.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:21:13.176Z,1528863673.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:13.572Z,1528863673.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:21:13.572Z,1528863673.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:13.964Z,1528863673.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:21:13.965Z,1528863673.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:14.363Z,1528863674.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:21:14.364Z,1528863674.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:14.763Z,1528863674.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:21:14.764Z,1528863674.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:15.161Z,1528863675.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:21:15.162Z,1528863675.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:15.571Z,1528863675.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:21:15.572Z,1528863675.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:15.968Z,1528863675.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:21:15.969Z,1528863675.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:16.371Z,1528863676.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:21:16.372Z,1528863676.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:16.767Z,1528863676.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:21:16.768Z,1528863676.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:17.159Z,1528863677.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:21:17.160Z,1528863677.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:17.561Z,1528863677.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:21:17.562Z,1528863677.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:17.963Z,1528863677.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:21:17.964Z,1528863677.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:18.362Z,1528863678.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:21:18.363Z,1528863678.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:18.769Z,1528863678.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:21:18.770Z,1528863678.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:19.171Z,1528863679.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:21:19.172Z,1528863679.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:19.567Z,1528863679.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:21:19.568Z,1528863679.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:19.963Z,1528863679.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:21:19.964Z,1528863679.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:20.363Z,1528863680.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:21:20.364Z,1528863680.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:20.761Z,1528863680.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:21:20.762Z,1528863680.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:21.161Z,1528863681.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:21:21.162Z,1528863681.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:21.571Z,1528863681.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:21:21.572Z,1528863681.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:21.972Z,1528863681.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:21:21.973Z,1528863681.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:22.367Z,1528863682.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:21:22.368Z,1528863682.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:22.764Z,1528863682.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:21:22.764Z,1528863682.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:23.168Z,1528863683.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:21:23.169Z,1528863683.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:23.564Z,1528863683.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:21:23.565Z,1528863683.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:23.974Z,1528863683.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:21:23.975Z,1528863683.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:24.359Z,1528863684.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:21:24.360Z,1528863684.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:24.771Z,1528863684.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:21:24.772Z,1528863684.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:25.175Z,1528863685.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:21:25.176Z,1528863685.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:25.570Z,1528863685.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:21:25.571Z,1528863685.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:25.964Z,1528863685.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:21:25.965Z,1528863685.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:26.365Z,1528863686.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:21:26.366Z,1528863686.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:26.762Z,1528863686.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:21:26.763Z,1528863686.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:27.164Z,1528863687.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:21:27.165Z,1528863687.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:27.573Z,1528863687.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:21:27.574Z,1528863687.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:27.972Z,1528863687.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:28.372Z,1528863688.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:28.768Z,1528863688.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:29.161Z,1528863689.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:29.563Z,1528863689.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:29.964Z,1528863689.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:30.368Z,1528863690.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:30.772Z,1528863690.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:31.173Z,1528863691.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:31.572Z,1528863691.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:31.964Z,1528863691.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:32.364Z,1528863692.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:32.775Z,1528863692.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:33.172Z,1528863693.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:33.599Z,1528863693.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:33.976Z,1528863693.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:34.373Z,1528863694.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:34.778Z,1528863694.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:35.177Z,1528863695.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:35.556Z,1528863695.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:35.958Z,1528863695.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:36.359Z,1528863696.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:36.786Z,1528863696.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:37.186Z,1528863697.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:37.586Z,1528863697.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:37.960Z,1528863697.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:38.361Z,1528863698.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:38.757Z,1528863698.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:39.164Z,1528863699.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:39.587Z,1528863699.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:39.967Z,1528863699.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:40.371Z,1528863700.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:40.761Z,1528863700.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:41.172Z,1528863701.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:41.563Z,1528863701.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:41.966Z,1528863701.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:42.368Z,1528863702.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:42.769Z,1528863702.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:43.176Z,1528863703.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:43.569Z,1528863703.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:43.964Z,1528863703.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:44.366Z,1528863704.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:47.471Z,1528863707.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:47.644Z,1528863707.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:48.022Z,1528863708.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:48.420Z,1528863708.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:48.818Z,1528863708.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:49.208Z,1528863709.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:49.604Z,1528863709.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:50.007Z,1528863710.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:50.411Z,1528863710.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:50.813Z,1528863710.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:51.219Z,1528863711.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:51.621Z,1528863711.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:52.004Z,1528863712.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:52.406Z,1528863712.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:52.816Z,1528863712.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:53.209Z,1528863713.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:53.613Z,1528863713.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:54.021Z,1528863714.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:54.413Z,1528863714.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:54.808Z,1528863714.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:55.208Z,1528863715.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:55.608Z,1528863715.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:56.007Z,1528863716.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:56.412Z,1528863716.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:56.813Z,1528863716.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:57.219Z,1528863717.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:57.622Z,1528863717.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:58.004Z,1528863718.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:58.406Z,1528863718.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:58.808Z,1528863718.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:59.210Z,1528863719.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:21:59.617Z,1528863719.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:00.021Z,1528863720.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:00.413Z,1528863720.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:00.808Z,1528863720.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:01.208Z,1528863721.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:01.606Z,1528863721.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:02.009Z,1528863722.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:02.408Z,1528863722.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:02.817Z,1528863722.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:03.224Z,1528863723.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:03.620Z,1528863723.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:04.011Z,1528863724.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:04.409Z,1528863724.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:04.808Z,1528863724.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:05.208Z,1528863725.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:05.616Z,1528863725.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:06.022Z,1528863726.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:06.416Z,1528863726.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:06.808Z,1528863726.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:07.213Z,1528863727.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:07.612Z,1528863727.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:08.016Z,1528863728.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:08.420Z,1528863728.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:08.817Z,1528863728.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:09.222Z,1528863729.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:09.622Z,1528863729.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:10.016Z,1528863730.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:10.416Z,1528863730.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:10.813Z,1528863730.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:11.209Z,1528863731.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:11.624Z,1528863731.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:12.023Z,1528863732.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:12.415Z,1528863732.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:12.812Z,1528863732.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:13.218Z,1528863733.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:13.616Z,1528863733.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:14.010Z,1528863734.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:14.401Z,1528863734.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:14.827Z,1528863734.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:15.231Z,1528863735.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:15.615Z,1528863735.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:16.013Z,1528863736.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:16.407Z,1528863736.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:16.808Z,1528863736.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:17.203Z,1528863737.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:17.611Z,1528863737.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:18.015Z,1528863738.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:18.412Z,1528863738.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:18.807Z,1528863738.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:19.208Z,1528863739.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:19.604Z,1528863739.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:20.008Z,1528863740.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:20.407Z,1528863740.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:20.809Z,1528863740.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:21.215Z,1528863741.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:21.615Z,1528863741.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:22.004Z,1528863742.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:22.407Z,1528863742.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:22.809Z,1528863742.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:23.206Z,1528863743.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:23.612Z,1528863743.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:24.016Z,1528863744.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:24.409Z,1528863744.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:24.806Z,1528863744.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:25.235Z,1528863745.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:25.612Z,1528863745.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:26.009Z,1528863746.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:26.408Z,1528863746.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:26.812Z,1528863746.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:27.215Z,1528863747.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:27.612Z,1528863747.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:28.004Z,1528863748.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:28.407Z,1528863748.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:28.807Z,1528863748.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:29.206Z,1528863749.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:29.616Z,1528863749.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:30.014Z,1528863750.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:30.416Z,1528863750.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:30.806Z,1528863750.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:31.259Z,1528863751.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:31.604Z,1528863751.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:32.007Z,1528863752.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:32.408Z,1528863752.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:32.816Z,1528863752.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:33.219Z,1528863753.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:33.616Z,1528863753.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:34.004Z,1528863754.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:34.406Z,1528863754.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:34.807Z,1528863754.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:35.205Z,1528863755.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:35.620Z,1528863755.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:36.016Z,1528863756.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:36.413Z,1528863756.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:36.809Z,1528863756.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:37.207Z,1528863757.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:37.613Z,1528863757.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:38.024Z,1528863758.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:38.428Z,1528863758.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:38.804Z,1528863758.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:39.212Z,1528863759.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:39.607Z,1528863759.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:40.008Z,1528863760.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:40.406Z,1528863760.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:40.820Z,1528863760.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:41.224Z,1528863761.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:41.616Z,1528863761.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:42.008Z,1528863762.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:42.404Z,1528863762.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:42.808Z,1528863762.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:43.207Z,1528863763.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:43.617Z,1528863763.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:44.024Z,1528863764.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:44.420Z,1528863764.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:44.812Z,1528863764.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:45.210Z,1528863765.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:45.612Z,1528863765.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:48.720Z,1528863768.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:48.895Z,1528863768.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:49.275Z,1528863769.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:49.679Z,1528863769.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:50.072Z,1528863770.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:50.466Z,1528863770.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:50.867Z,1528863770.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:51.266Z,1528863771.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:51.675Z,1528863771.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:52.075Z,1528863772.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:52.471Z,1528863772.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:52.867Z,1528863772.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:53.266Z,1528863773.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:53.668Z,1528863773.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:54.067Z,1528863774.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:54.468Z,1528863774.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:54.873Z,1528863774.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:55.275Z,1528863775.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:55.672Z,1528863775.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:56.065Z,1528863776.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:56.464Z,1528863776.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:56.867Z,1528863776.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:57.268Z,1528863777.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:57.675Z,1528863777.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:58.076Z,1528863778.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:58.471Z,1528863778.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:58.872Z,1528863778.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:59.268Z,1528863779.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:22:59.672Z,1528863779.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:00.069Z,1528863780.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:00.466Z,1528863780.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:00.871Z,1528863780.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:01.275Z,1528863781.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:01.672Z,1528863781.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:02.072Z,1528863782.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:02.472Z,1528863782.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:02.866Z,1528863782.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:03.266Z,1528863783.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:03.675Z,1528863783.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:04.075Z,1528863784.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:04.476Z,1528863784.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:04.868Z,1528863784.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:05.266Z,1528863785.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:05.666Z,1528863785.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:06.069Z,1528863786.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:06.467Z,1528863786.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:06.876Z,1528863786.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:07.275Z,1528863787.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:07.676Z,1528863787.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:08.068Z,1528863788.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:08.468Z,1528863788.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:08.872Z,1528863788.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:09.268Z,1528863789.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:09.680Z,1528863789.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:10.076Z,1528863790.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:10.476Z,1528863790.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:10.868Z,1528863790.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:11.274Z,1528863791.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:11.666Z,1528863791.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:12.068Z,1528863792.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:12.473Z,1528863792.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:12.876Z,1528863792.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:13.278Z,1528863793.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:13.680Z,1528863793.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:14.067Z,1528863794.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:14.468Z,1528863794.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:14.868Z,1528863794.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:15.268Z,1528863795.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:15.676Z,1528863795.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:16.075Z,1528863796.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:16.475Z,1528863796.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:16.870Z,1528863796.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:17.268Z,1528863797.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:17.667Z,1528863797.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:18.069Z,1528863798.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:18.466Z,1528863798.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:18.880Z,1528863798.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:19.276Z,1528863799.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:19.680Z,1528863799.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:20.068Z,1528863800.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:20.470Z,1528863800.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:20.869Z,1528863800.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:21.266Z,1528863801.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:21.684Z,1528863801.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:22.080Z,1528863802.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:22.476Z,1528863802.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:22.869Z,1528863802.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:23.267Z,1528863803.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:23.676Z,1528863803.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:24.077Z,1528863804.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:24.473Z,1528863804.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:24.868Z,1528863804.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:25.271Z,1528863805.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:25.673Z,1528863805.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:26.080Z,1528863806.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:26.476Z,1528863806.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:26.865Z,1528863806.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:27.266Z,1528863807.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:27.677Z,1528863807.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:28.080Z,1528863808.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:28.476Z,1528863808.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:28.869Z,1528863808.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:29.268Z,1528863809.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:29.678Z,1528863809.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:30.081Z,1528863810.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:30.480Z,1528863810.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:30.872Z,1528863810.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:31.276Z,1528863811.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:31.677Z,1528863811.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:32.084Z,1528863812.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:32.483Z,1528863812.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:32.868Z,1528863812.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:33.280Z,1528863813.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:33.681Z,1528863813.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:34.077Z,1528863814.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:34.478Z,1528863814.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:34.876Z,1528863814.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:35.271Z,1528863815.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:35.678Z,1528863815.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:36.082Z,1528863816.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:36.473Z,1528863816.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:36.869Z,1528863816.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:37.282Z,1528863817.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:37.677Z,1528863817.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:38.082Z,1528863818.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:38.494Z,1528863818.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:38.878Z,1528863818.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:39.275Z,1528863819.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:39.682Z,1528863819.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:40.081Z,1528863820.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:40.479Z,1528863820.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:40.880Z,1528863820.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:41.266Z,1528863821.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:41.679Z,1528863821.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:42.082Z,1528863822.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:42.479Z,1528863822.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:42.877Z,1528863822.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:43.277Z,1528863823.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:43.687Z,1528863823.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:44.092Z,1528863824.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:44.497Z,1528863824.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:47.585Z,1528863827.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:47.732Z,1528863827.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:48.129Z,1528863828.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:48.527Z,1528863828.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:48.936Z,1528863828.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:49.312Z,1528863829.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:49.708Z,1528863829.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:50.113Z,1528863830.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:50.516Z,1528863830.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:50.940Z,1528863830.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:51.339Z,1528863831.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:51.743Z,1528863831.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:52.111Z,1528863832.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:52.515Z,1528863832.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:52.918Z,1528863832.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:53.316Z,1528863833.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:53.720Z,1528863833.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:54.124Z,1528863834.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:54.520Z,1528863834.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:54.923Z,1528863834.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:55.330Z,1528863835.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:55.722Z,1528863835.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:56.128Z,1528863836.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:56.532Z,1528863836.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:56.916Z,1528863836.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:57.314Z,1528863837.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:57.725Z,1528863837.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:58.124Z,1528863838.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:58.523Z,1528863838.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:58.916Z,1528863838.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:59.314Z,1528863839.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:23:59.728Z,1528863839.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:00.124Z,1528863840.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:00.520Z,1528863840.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:00.915Z,1528863840.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:01.315Z,1528863841.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:01.732Z,1528863841.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:02.129Z,1528863842.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:02.529Z,1528863842.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:02.921Z,1528863842.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:03.328Z,1528863843.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:03.735Z,1528863843.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:04.131Z,1528863844.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:04.531Z,1528863844.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:04.910Z,1528863844.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:05.308Z,1528863845.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:05.735Z,1528863845.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:06.139Z,1528863846.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:06.524Z,1528863846.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:06.916Z,1528863846.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:07.316Z,1528863847.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:07.723Z,1528863847.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:08.122Z,1528863848.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:08.544Z,1528863848.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:08.915Z,1528863848.915 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:08.915Z,1528863848.915 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2018-06-13T04:24:08.915Z,1528863848.915 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:24:08.916Z,1528863848.916 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:08.917Z,1528863848.917 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-06-13T04:24:08.917Z,1528863848.917 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:24:08.919Z,1528863848.919 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:08.919Z,1528863848.919 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-06-13T04:24:08.919Z,1528863848.919 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:24:08.993Z,1528863848.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:24:08.993Z,1528863848.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:24:08.994Z,1528863848.994 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:24:09.398Z,1528863849.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:24:09.398Z,1528863849.398 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2018-06-13T04:24:09.398Z,1528863849.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:24:09.398Z,1528863849.398 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-06-13T04:24:09.399Z,1528863849.399 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:24:09.399Z,1528863849.399 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-06-13T04:24:09.730Z,1528863849.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:24:09.730Z,1528863849.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:24:09.731Z,1528863849.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:24:09.731Z,1528863849.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:24:09.731Z,1528863849.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:24:09.732Z,1528863849.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:24:09.732Z,1528863849.732 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:24:09.733Z,1528863849.733 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:24:09.733Z,1528863849.733 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:24:10.124Z,1528863850.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:24:10.125Z,1528863850.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:10.524Z,1528863850.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:24:10.526Z,1528863850.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:10.924Z,1528863850.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:24:10.925Z,1528863850.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:11.324Z,1528863851.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:24:11.325Z,1528863851.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:11.724Z,1528863851.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:24:11.725Z,1528863851.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:12.136Z,1528863852.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:24:12.136Z,1528863852.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:12.528Z,1528863852.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:24:12.529Z,1528863852.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:12.916Z,1528863852.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:24:12.917Z,1528863852.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:13.320Z,1528863853.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:24:13.321Z,1528863853.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:13.725Z,1528863853.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:24:13.726Z,1528863853.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:14.136Z,1528863854.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:24:14.137Z,1528863854.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:14.530Z,1528863854.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:24:14.531Z,1528863854.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:14.920Z,1528863854.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:24:14.921Z,1528863854.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:15.320Z,1528863855.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:24:15.321Z,1528863855.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:15.733Z,1528863855.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:24:15.734Z,1528863855.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:16.127Z,1528863856.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:24:16.128Z,1528863856.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:16.524Z,1528863856.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:24:16.526Z,1528863856.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:16.921Z,1528863856.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:24:16.922Z,1528863856.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:17.316Z,1528863857.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:24:17.317Z,1528863857.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:17.725Z,1528863857.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:24:17.726Z,1528863857.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:18.136Z,1528863858.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:24:18.137Z,1528863858.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:18.525Z,1528863858.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:24:18.526Z,1528863858.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:18.920Z,1528863858.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:24:18.921Z,1528863858.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:19.324Z,1528863859.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:24:19.325Z,1528863859.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:19.732Z,1528863859.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:24:19.733Z,1528863859.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:20.129Z,1528863860.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:24:20.130Z,1528863860.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:20.540Z,1528863860.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:24:20.541Z,1528863860.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:20.924Z,1528863860.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:24:20.925Z,1528863860.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:21.315Z,1528863861.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:24:21.316Z,1528863861.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:21.730Z,1528863861.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:24:21.731Z,1528863861.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:22.128Z,1528863862.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:24:22.129Z,1528863862.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:22.524Z,1528863862.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:24:22.525Z,1528863862.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:22.922Z,1528863862.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:24:22.923Z,1528863862.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:23.328Z,1528863863.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:24:23.329Z,1528863863.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:23.719Z,1528863863.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:24:23.720Z,1528863863.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:24.134Z,1528863864.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:24:24.135Z,1528863864.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:24.525Z,1528863864.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:24:24.526Z,1528863864.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:24.926Z,1528863864.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:24:24.927Z,1528863864.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:25.324Z,1528863865.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:24:25.325Z,1528863865.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:25.720Z,1528863865.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:24:25.721Z,1528863865.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:26.127Z,1528863866.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:24:26.127Z,1528863866.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:26.524Z,1528863866.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:24:26.525Z,1528863866.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:26.930Z,1528863866.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:24:26.930Z,1528863866.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:27.332Z,1528863867.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:24:27.333Z,1528863867.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:27.730Z,1528863867.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:24:27.731Z,1528863867.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:28.121Z,1528863868.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:24:28.122Z,1528863868.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:28.519Z,1528863868.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:24:28.520Z,1528863868.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:28.923Z,1528863868.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:29.324Z,1528863869.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:29.733Z,1528863869.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:30.137Z,1528863870.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:30.530Z,1528863870.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:30.934Z,1528863870.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:31.326Z,1528863871.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:31.731Z,1528863871.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:32.135Z,1528863872.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:32.510Z,1528863872.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:32.936Z,1528863872.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:33.340Z,1528863873.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:33.740Z,1528863873.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:34.114Z,1528863874.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:34.517Z,1528863874.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:34.917Z,1528863874.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:35.325Z,1528863875.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:35.715Z,1528863875.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:36.127Z,1528863876.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:36.525Z,1528863876.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:36.922Z,1528863876.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:37.319Z,1528863877.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:37.714Z,1528863877.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:38.124Z,1528863878.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:38.519Z,1528863878.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:38.924Z,1528863878.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:39.328Z,1528863879.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:39.721Z,1528863879.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:40.124Z,1528863880.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:40.518Z,1528863880.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:40.915Z,1528863880.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:41.318Z,1528863881.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:41.719Z,1528863881.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:42.122Z,1528863882.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:42.523Z,1528863882.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:42.928Z,1528863882.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:43.319Z,1528863883.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:43.715Z,1528863883.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:44.119Z,1528863884.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:44.520Z,1528863884.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:44.928Z,1528863884.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:45.328Z,1528863885.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:45.732Z,1528863885.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:46.148Z,1528863886.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:46.546Z,1528863886.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:46.920Z,1528863886.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:47.321Z,1528863887.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:50.458Z,1528863890.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:50.462Z,1528863890.462 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T04:19:47.4Z
2018-06-13T04:24:50.462Z,1528863890.462 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T04:24:50.462Z,1528863890.462 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T04:24:50.601Z,1528863890.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:51.760Z,1528863891.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:51.916Z,1528863891.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:52.301Z,1528863892.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:52.708Z,1528863892.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:53.102Z,1528863893.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:53.501Z,1528863893.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:53.910Z,1528863893.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:57.176Z,1528863897.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:57.289Z,1528863897.289 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0024.lzma
2018-06-13T04:24:57.360Z,1528863897.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:57.730Z,1528863897.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:24:58.082Z,1528863898.082 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0024.lzma.bak
2018-06-13T04:24:58.082Z,1528863898.082 [DataOverHttps](INFO): SBD MOMSN=8328565
2018-06-13T04:24:58.153Z,1528863898.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:00.025Z,1528863900.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:00.203Z,1528863900.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:03.321Z,1528863903.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:03.472Z,1528863903.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:03.862Z,1528863903.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:04.254Z,1528863904.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:04.646Z,1528863904.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:05.059Z,1528863905.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:08.179Z,1528863908.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:08.274Z,1528863908.274 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0025.lzma
2018-06-13T04:25:08.342Z,1528863908.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:08.729Z,1528863908.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:09.074Z,1528863909.074 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0025.lzma.bak
2018-06-13T04:25:09.074Z,1528863909.074 [DataOverHttps](INFO): SBD MOMSN=8328568
2018-06-13T04:25:09.143Z,1528863909.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:10.999Z,1528863910.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:11.002Z,1528863911.002 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T04:25:11.002Z,1528863911.002 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T04:25:11.002Z,1528863911.002 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T04:25:11.174Z,1528863911.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:11.555Z,1528863911.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:14.660Z,1528863914.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:14.836Z,1528863914.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:15.239Z,1528863915.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:15.629Z,1528863915.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:16.033Z,1528863916.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:16.503Z,1528863916.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:16.897Z,1528863916.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:17.263Z,1528863917.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:17.648Z,1528863917.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:18.056Z,1528863918.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:18.420Z,1528863918.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:18.827Z,1528863918.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:19.224Z,1528863919.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:19.628Z,1528863919.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:20.019Z,1528863920.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:20.417Z,1528863920.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:20.829Z,1528863920.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:21.355Z,1528863921.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:21.625Z,1528863921.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:22.020Z,1528863922.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:22.432Z,1528863922.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:22.832Z,1528863922.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:23.231Z,1528863923.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:23.633Z,1528863923.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:24.017Z,1528863924.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:24.418Z,1528863924.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:24.840Z,1528863924.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:25.230Z,1528863925.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:25.627Z,1528863925.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:26.025Z,1528863926.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:26.428Z,1528863926.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:26.836Z,1528863926.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:27.233Z,1528863927.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:27.627Z,1528863927.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:28.022Z,1528863928.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:28.428Z,1528863928.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:28.836Z,1528863928.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:29.235Z,1528863929.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:29.634Z,1528863929.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:30.023Z,1528863930.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:30.420Z,1528863930.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:30.840Z,1528863930.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:31.229Z,1528863931.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:31.629Z,1528863931.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:32.032Z,1528863932.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:32.425Z,1528863932.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:32.830Z,1528863932.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:33.234Z,1528863933.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:33.625Z,1528863933.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:34.022Z,1528863934.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:34.423Z,1528863934.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:34.831Z,1528863934.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:35.227Z,1528863935.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:35.634Z,1528863935.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:36.021Z,1528863936.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:36.420Z,1528863936.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:36.846Z,1528863936.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:37.230Z,1528863937.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:37.630Z,1528863937.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:38.034Z,1528863938.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:38.430Z,1528863938.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:38.822Z,1528863938.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:39.234Z,1528863939.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:39.635Z,1528863939.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:40.031Z,1528863940.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:40.436Z,1528863940.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:40.833Z,1528863940.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:41.214Z,1528863941.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:41.618Z,1528863941.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:42.023Z,1528863942.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:42.443Z,1528863942.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:42.828Z,1528863942.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:43.218Z,1528863943.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:43.618Z,1528863943.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:44.018Z,1528863944.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:44.415Z,1528863944.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:44.818Z,1528863944.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:45.226Z,1528863945.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:45.624Z,1528863945.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:46.023Z,1528863946.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:46.419Z,1528863946.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:46.820Z,1528863946.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:47.217Z,1528863947.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:47.618Z,1528863947.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:48.024Z,1528863948.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:48.432Z,1528863948.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:48.826Z,1528863948.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:49.218Z,1528863949.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:49.620Z,1528863949.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:50.019Z,1528863950.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:50.417Z,1528863950.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:50.817Z,1528863950.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:51.231Z,1528863951.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:51.627Z,1528863951.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:52.028Z,1528863952.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:52.419Z,1528863952.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:52.816Z,1528863952.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:53.221Z,1528863953.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:53.619Z,1528863953.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:54.028Z,1528863954.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:54.427Z,1528863954.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:54.832Z,1528863954.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:55.225Z,1528863955.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:55.631Z,1528863955.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:56.019Z,1528863956.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:56.419Z,1528863956.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:56.824Z,1528863956.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:57.229Z,1528863957.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:57.627Z,1528863957.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:58.027Z,1528863958.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:58.419Z,1528863958.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:58.818Z,1528863958.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:59.220Z,1528863959.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:25:59.624Z,1528863959.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:00.024Z,1528863960.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:00.427Z,1528863960.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:00.824Z,1528863960.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:01.223Z,1528863961.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:01.619Z,1528863961.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:02.020Z,1528863962.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:02.419Z,1528863962.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:02.818Z,1528863962.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:03.224Z,1528863963.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:03.627Z,1528863963.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:04.029Z,1528863964.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:04.419Z,1528863964.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:04.823Z,1528863964.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:05.230Z,1528863965.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:05.620Z,1528863965.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:06.032Z,1528863966.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:06.428Z,1528863966.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:06.829Z,1528863966.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:07.219Z,1528863967.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:07.621Z,1528863967.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:08.015Z,1528863968.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:08.419Z,1528863968.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:08.821Z,1528863968.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:09.228Z,1528863969.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:09.632Z,1528863969.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:10.027Z,1528863970.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:10.419Z,1528863970.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:10.818Z,1528863970.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:11.223Z,1528863971.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:11.623Z,1528863971.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:14.761Z,1528863974.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:14.936Z,1528863974.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:15.319Z,1528863975.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:15.709Z,1528863975.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:16.112Z,1528863976.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:16.492Z,1528863976.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:16.919Z,1528863976.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:17.315Z,1528863977.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:17.717Z,1528863977.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:18.093Z,1528863978.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:18.492Z,1528863978.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:18.917Z,1528863978.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:19.314Z,1528863979.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:19.720Z,1528863979.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:20.125Z,1528863980.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:20.497Z,1528863980.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:20.920Z,1528863980.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:21.318Z,1528863981.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:21.720Z,1528863981.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:22.096Z,1528863982.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:22.497Z,1528863982.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:22.920Z,1528863982.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:23.320Z,1528863983.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:23.719Z,1528863983.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:24.092Z,1528863984.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:24.496Z,1528863984.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:24.918Z,1528863984.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:25.315Z,1528863985.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:25.727Z,1528863985.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:26.104Z,1528863986.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:26.497Z,1528863986.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:26.908Z,1528863986.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:27.330Z,1528863987.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:27.700Z,1528863987.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:28.097Z,1528863988.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:28.498Z,1528863988.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:28.900Z,1528863988.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:29.307Z,1528863989.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:29.708Z,1528863989.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:30.094Z,1528863990.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:30.500Z,1528863990.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:30.896Z,1528863990.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:31.300Z,1528863991.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:31.706Z,1528863991.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:32.107Z,1528863992.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:32.498Z,1528863992.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:32.904Z,1528863992.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:33.300Z,1528863993.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:33.695Z,1528863993.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:34.103Z,1528863994.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:34.507Z,1528863994.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:34.903Z,1528863994.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:35.297Z,1528863995.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:35.699Z,1528863995.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:36.099Z,1528863996.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:36.498Z,1528863996.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:36.899Z,1528863996.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:37.303Z,1528863997.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:37.707Z,1528863997.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:38.108Z,1528863998.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:38.498Z,1528863998.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:38.898Z,1528863998.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:39.320Z,1528863999.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:39.696Z,1528863999.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:40.110Z,1528864000.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:40.512Z,1528864000.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:40.905Z,1528864000.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:41.300Z,1528864001.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:41.682Z,1528864001.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:41.700Z,1528864001.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:42.081Z,1528864002.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:42.099Z,1528864002.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:42.479Z,1528864002.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:42.501Z,1528864002.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:42.879Z,1528864002.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:42.910Z,1528864002.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:43.287Z,1528864003.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:43.305Z,1528864003.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:43.695Z,1528864003.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:43.712Z,1528864003.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:44.094Z,1528864004.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:44.112Z,1528864004.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:44.481Z,1528864004.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:44.499Z,1528864004.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:44.879Z,1528864004.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:44.910Z,1528864004.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:45.307Z,1528864005.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:45.696Z,1528864005.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:46.109Z,1528864006.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:46.496Z,1528864006.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:46.520Z,1528864006.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:46.887Z,1528864006.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:46.905Z,1528864006.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:47.275Z,1528864007.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:47.312Z,1528864007.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:47.676Z,1528864007.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:47.707Z,1528864007.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:48.075Z,1528864008.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:48.108Z,1528864008.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:48.476Z,1528864008.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:48.512Z,1528864008.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:48.875Z,1528864008.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:48.912Z,1528864008.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:49.291Z,1528864009.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:49.309Z,1528864009.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:49.696Z,1528864009.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:49.713Z,1528864009.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:50.096Z,1528864010.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:50.120Z,1528864010.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:50.475Z,1528864010.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:50.508Z,1528864010.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:50.875Z,1528864010.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:50.916Z,1528864010.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:51.276Z,1528864011.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:51.302Z,1528864011.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:51.679Z,1528864011.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:51.717Z,1528864011.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:52.096Z,1528864012.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:52.114Z,1528864012.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:52.497Z,1528864012.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:52.515Z,1528864012.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:52.881Z,1528864012.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:52.908Z,1528864012.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:53.275Z,1528864013.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:53.313Z,1528864013.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:53.676Z,1528864013.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:53.702Z,1528864013.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:54.075Z,1528864014.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:54.094Z,1528864014.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:54.474Z,1528864014.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:54.516Z,1528864014.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:54.879Z,1528864014.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:54.898Z,1528864014.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:55.285Z,1528864015.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:55.324Z,1528864015.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:55.689Z,1528864015.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:55.728Z,1528864015.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:56.089Z,1528864016.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:56.108Z,1528864016.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:56.480Z,1528864016.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:56.505Z,1528864016.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:56.880Z,1528864016.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:56.897Z,1528864016.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:57.282Z,1528864017.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:57.300Z,1528864017.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:57.675Z,1528864017.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:57.698Z,1528864017.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:58.086Z,1528864018.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:58.105Z,1528864018.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:58.489Z,1528864018.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:58.507Z,1528864018.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:58.886Z,1528864018.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:58.904Z,1528864018.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:59.281Z,1528864019.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:59.299Z,1528864019.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:26:59.682Z,1528864019.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:26:59.700Z,1528864019.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:00.075Z,1528864020.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:00.099Z,1528864020.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:00.482Z,1528864020.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:00.500Z,1528864020.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:00.879Z,1528864020.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:00.912Z,1528864020.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:01.287Z,1528864021.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:01.306Z,1528864021.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:01.689Z,1528864021.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:01.707Z,1528864021.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:02.090Z,1528864022.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:02.108Z,1528864022.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:02.482Z,1528864022.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:02.500Z,1528864022.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:02.879Z,1528864022.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:02.910Z,1528864022.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:03.285Z,1528864023.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:03.303Z,1528864023.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:03.671Z,1528864023.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:03.706Z,1528864023.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:04.092Z,1528864024.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:04.110Z,1528864024.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:04.496Z,1528864024.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:04.514Z,1528864024.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:04.893Z,1528864024.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:04.916Z,1528864024.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:05.276Z,1528864025.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:05.306Z,1528864025.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:05.675Z,1528864025.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:05.707Z,1528864025.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:06.075Z,1528864026.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:06.106Z,1528864026.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:06.474Z,1528864026.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:06.508Z,1528864026.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:06.875Z,1528864026.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:06.914Z,1528864026.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:07.285Z,1528864027.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:07.314Z,1528864027.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:07.696Z,1528864027.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:07.714Z,1528864027.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:08.085Z,1528864028.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:08.121Z,1528864028.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:08.475Z,1528864028.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:08.509Z,1528864028.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:08.879Z,1528864028.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:08.920Z,1528864028.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:09.276Z,1528864029.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:09.294Z,1528864029.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:09.681Z,1528864029.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:09.699Z,1528864029.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:10.089Z,1528864030.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:10.127Z,1528864030.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:10.127Z,1528864030.127 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2018-06-13T04:27:10.127Z,1528864030.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:27:10.130Z,1528864030.130 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:10.130Z,1528864030.130 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21
2018-06-13T04:27:10.130Z,1528864030.130 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:27:10.132Z,1528864030.132 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:10.132Z,1528864030.132 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2018-06-13T04:27:10.132Z,1528864030.132 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:27:10.221Z,1528864030.221 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:27:10.221Z,1528864030.221 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:27:10.221Z,1528864030.221 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:27:10.489Z,1528864030.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:10.602Z,1528864030.602 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:27:10.602Z,1528864030.602 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2018-06-13T04:27:10.602Z,1528864030.602 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:27:10.602Z,1528864030.602 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21
2018-06-13T04:27:10.603Z,1528864030.603 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:27:10.603Z,1528864030.603 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2018-06-13T04:27:10.882Z,1528864030.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:10.899Z,1528864030.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:27:10.900Z,1528864030.900 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:27:10.900Z,1528864030.900 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:27:10.900Z,1528864030.900 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:27:10.901Z,1528864030.901 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:27:10.901Z,1528864030.901 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:27:10.902Z,1528864030.902 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:27:10.902Z,1528864030.902 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:27:10.902Z,1528864030.902 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:27:11.283Z,1528864031.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:11.305Z,1528864031.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:27:11.306Z,1528864031.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:11.679Z,1528864031.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:11.719Z,1528864031.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:27:11.720Z,1528864031.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:12.075Z,1528864032.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:12.109Z,1528864032.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:27:12.110Z,1528864032.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:12.479Z,1528864032.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:12.510Z,1528864032.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:27:12.511Z,1528864032.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:12.879Z,1528864032.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:12.913Z,1528864032.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:27:12.914Z,1528864032.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:16.006Z,1528864036.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:16.023Z,1528864036.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T04:27:16.024Z,1528864036.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:16.162Z,1528864036.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:16.206Z,1528864036.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T04:27:16.207Z,1528864036.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:16.559Z,1528864036.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:16.584Z,1528864036.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T04:27:16.585Z,1528864036.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:16.940Z,1528864036.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:16.967Z,1528864036.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:27:16.968Z,1528864036.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:17.336Z,1528864037.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:27:17.362Z,1528864037.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:27:17.363Z,1528864037.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:17.763Z,1528864037.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:27:17.764Z,1528864037.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:18.168Z,1528864038.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:27:18.169Z,1528864038.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:18.572Z,1528864038.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:27:18.573Z,1528864038.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:18.973Z,1528864038.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:27:18.974Z,1528864038.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:19.365Z,1528864039.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:27:19.366Z,1528864039.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:19.760Z,1528864039.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:27:19.762Z,1528864039.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:20.162Z,1528864040.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:27:20.163Z,1528864040.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:20.565Z,1528864040.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:27:20.566Z,1528864040.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:20.959Z,1528864040.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:27:20.960Z,1528864040.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:21.411Z,1528864041.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T04:27:21.412Z,1528864041.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:21.780Z,1528864041.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T04:27:21.781Z,1528864041.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:22.169Z,1528864042.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:27:22.170Z,1528864042.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:22.565Z,1528864042.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:27:22.566Z,1528864042.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:22.965Z,1528864042.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:27:22.966Z,1528864042.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:23.365Z,1528864043.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:27:23.366Z,1528864043.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:23.768Z,1528864043.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:27:23.769Z,1528864043.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:24.169Z,1528864044.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:27:24.170Z,1528864044.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:24.572Z,1528864044.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:27:24.574Z,1528864044.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:24.974Z,1528864044.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:27:24.975Z,1528864044.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:25.364Z,1528864045.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:27:25.365Z,1528864045.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:25.769Z,1528864045.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:27:25.770Z,1528864045.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:26.168Z,1528864046.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:27:26.173Z,1528864046.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:26.570Z,1528864046.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:27:26.571Z,1528864046.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:26.956Z,1528864046.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:27:26.977Z,1528864046.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:27.383Z,1528864047.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T04:27:27.383Z,1528864047.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:27.762Z,1528864047.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:27:27.763Z,1528864047.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:28.166Z,1528864048.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:27:28.167Z,1528864048.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:28.564Z,1528864048.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:27:28.565Z,1528864048.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:28.960Z,1528864048.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:27:28.961Z,1528864048.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:29.359Z,1528864049.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:27:29.360Z,1528864049.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:29.758Z,1528864049.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:27:29.759Z,1528864049.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:30.160Z,1528864050.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:30.567Z,1528864050.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:30.967Z,1528864050.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:31.357Z,1528864051.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:31.757Z,1528864051.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:32.160Z,1528864052.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:32.559Z,1528864052.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:32.960Z,1528864052.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:33.370Z,1528864053.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:33.767Z,1528864053.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:34.169Z,1528864054.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:34.559Z,1528864054.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:34.964Z,1528864054.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:35.362Z,1528864055.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:35.762Z,1528864055.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:36.169Z,1528864056.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:36.568Z,1528864056.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:36.976Z,1528864056.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:37.357Z,1528864057.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:37.760Z,1528864057.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:38.172Z,1528864058.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:38.564Z,1528864058.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:38.959Z,1528864058.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:39.374Z,1528864059.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:39.776Z,1528864059.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:40.170Z,1528864060.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:40.573Z,1528864060.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:40.969Z,1528864060.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:41.361Z,1528864061.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:41.772Z,1528864061.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:42.170Z,1528864062.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:42.572Z,1528864062.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:42.980Z,1528864062.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:43.356Z,1528864063.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:43.760Z,1528864063.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:44.171Z,1528864064.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:44.561Z,1528864064.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:44.972Z,1528864064.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:45.380Z,1528864065.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:45.770Z,1528864065.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:46.170Z,1528864066.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:46.559Z,1528864066.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:46.961Z,1528864066.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:47.362Z,1528864067.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:47.763Z,1528864067.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:48.170Z,1528864068.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:48.580Z,1528864068.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:48.973Z,1528864068.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:49.357Z,1528864069.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:49.762Z,1528864069.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:50.158Z,1528864070.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:50.562Z,1528864070.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:50.964Z,1528864070.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:51.384Z,1528864071.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:51.770Z,1528864071.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:52.168Z,1528864072.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:52.559Z,1528864072.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:52.960Z,1528864072.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:53.361Z,1528864073.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:53.761Z,1528864073.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:54.165Z,1528864074.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:54.574Z,1528864074.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:54.969Z,1528864074.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:55.366Z,1528864075.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:55.760Z,1528864075.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:56.169Z,1528864076.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:56.568Z,1528864076.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:56.964Z,1528864076.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:57.380Z,1528864077.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:57.770Z,1528864077.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:58.170Z,1528864078.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:58.548Z,1528864078.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:58.952Z,1528864078.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:59.354Z,1528864079.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:27:59.752Z,1528864079.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:00.182Z,1528864080.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:00.578Z,1528864080.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:00.980Z,1528864080.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:01.378Z,1528864081.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:01.755Z,1528864081.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:02.155Z,1528864082.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:02.560Z,1528864082.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:02.955Z,1528864082.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:03.387Z,1528864083.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:03.767Z,1528864083.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:04.167Z,1528864084.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:04.555Z,1528864084.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:04.955Z,1528864084.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:05.360Z,1528864085.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:05.755Z,1528864085.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:06.167Z,1528864086.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:06.571Z,1528864086.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:06.971Z,1528864086.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:07.358Z,1528864087.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:07.760Z,1528864087.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:08.159Z,1528864088.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:08.559Z,1528864088.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:08.960Z,1528864088.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:09.372Z,1528864089.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:09.771Z,1528864089.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:10.169Z,1528864090.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:10.559Z,1528864090.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:10.962Z,1528864090.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:11.363Z,1528864091.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:11.763Z,1528864091.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:12.176Z,1528864092.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:12.576Z,1528864092.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:12.980Z,1528864092.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:16.067Z,1528864096.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:16.243Z,1528864096.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:16.615Z,1528864096.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:17.013Z,1528864097.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:17.407Z,1528864097.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:17.809Z,1528864097.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:18.209Z,1528864098.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:18.598Z,1528864098.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:18.988Z,1528864098.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:19.419Z,1528864099.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:19.824Z,1528864099.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:20.214Z,1528864100.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:20.588Z,1528864100.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:20.989Z,1528864100.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:21.410Z,1528864101.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:21.793Z,1528864101.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:22.221Z,1528864102.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:22.604Z,1528864102.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:23.000Z,1528864103.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:23.401Z,1528864103.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:23.796Z,1528864103.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:24.201Z,1528864104.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:24.598Z,1528864104.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:24.994Z,1528864104.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:25.400Z,1528864105.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:25.804Z,1528864105.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:26.204Z,1528864106.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:26.596Z,1528864106.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:26.994Z,1528864106.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:27.417Z,1528864107.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:27.801Z,1528864107.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:28.199Z,1528864108.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:28.604Z,1528864108.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:29.005Z,1528864109.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:29.405Z,1528864109.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:29.804Z,1528864109.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:30.207Z,1528864110.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:30.603Z,1528864110.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:31.008Z,1528864111.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:31.407Z,1528864111.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:31.808Z,1528864111.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:32.210Z,1528864112.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:32.595Z,1528864112.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:32.992Z,1528864112.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:33.399Z,1528864113.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:33.792Z,1528864113.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:34.206Z,1528864114.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:34.610Z,1528864114.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:35.003Z,1528864115.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:35.401Z,1528864115.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:35.796Z,1528864115.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:36.200Z,1528864116.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:36.595Z,1528864116.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:36.996Z,1528864116.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:37.402Z,1528864117.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:37.808Z,1528864117.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:38.210Z,1528864118.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:38.594Z,1528864118.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:39.001Z,1528864119.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:39.400Z,1528864119.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:39.802Z,1528864119.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:40.207Z,1528864120.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:40.616Z,1528864120.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:41.004Z,1528864121.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:41.396Z,1528864121.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:41.809Z,1528864121.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:42.208Z,1528864122.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:42.609Z,1528864122.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:43.012Z,1528864123.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:43.407Z,1528864123.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:43.812Z,1528864123.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:44.224Z,1528864124.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:44.614Z,1528864124.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:45.013Z,1528864125.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:45.393Z,1528864125.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:45.786Z,1528864125.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:46.219Z,1528864126.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:46.617Z,1528864126.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:47.019Z,1528864127.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:47.396Z,1528864127.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:47.796Z,1528864127.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:48.189Z,1528864128.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:48.596Z,1528864128.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:48.992Z,1528864128.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:49.399Z,1528864129.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:49.821Z,1528864129.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:50.220Z,1528864130.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:50.592Z,1528864130.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:50.992Z,1528864130.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:51.396Z,1528864131.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:51.790Z,1528864131.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:52.204Z,1528864132.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:52.604Z,1528864132.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:52.000Z,1528864133.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:53.400Z,1528864133.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:53.800Z,1528864133.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:54.191Z,1528864134.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:54.613Z,1528864134.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:54.995Z,1528864134.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:55.405Z,1528864135.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:55.804Z,1528864135.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:56.211Z,1528864136.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:56.596Z,1528864136.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:57.013Z,1528864137.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:57.399Z,1528864137.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:57.801Z,1528864137.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:58.206Z,1528864138.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:58.616Z,1528864138.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:59.010Z,1528864139.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:59.402Z,1528864139.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:28:59.800Z,1528864139.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:00.198Z,1528864140.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:00.598Z,1528864140.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:01.000Z,1528864141.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:01.416Z,1528864141.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:01.810Z,1528864141.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:02.216Z,1528864142.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:02.598Z,1528864142.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:02.996Z,1528864142.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:03.411Z,1528864143.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:03.803Z,1528864143.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:04.206Z,1528864144.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:04.616Z,1528864144.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:05.006Z,1528864145.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:05.398Z,1528864145.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:05.808Z,1528864145.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:06.207Z,1528864146.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:06.610Z,1528864146.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:07.011Z,1528864147.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:07.409Z,1528864147.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:07.805Z,1528864147.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:08.225Z,1528864148.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:08.617Z,1528864148.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:09.006Z,1528864149.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:09.401Z,1528864149.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:09.804Z,1528864149.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:10.210Z,1528864150.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:10.616Z,1528864150.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:11.004Z,1528864151.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:11.398Z,1528864151.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:11.803Z,1528864151.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:14.914Z,1528864154.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:15.090Z,1528864155.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:15.463Z,1528864155.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:15.855Z,1528864155.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:16.251Z,1528864156.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:16.652Z,1528864156.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:17.057Z,1528864157.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:17.458Z,1528864157.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:17.859Z,1528864157.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:18.258Z,1528864158.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:18.654Z,1528864158.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:19.056Z,1528864159.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:19.450Z,1528864159.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:19.858Z,1528864159.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:20.262Z,1528864160.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:20.660Z,1528864160.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:21.064Z,1528864161.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:21.461Z,1528864161.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:21.833Z,1528864161.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:22.256Z,1528864162.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:22.666Z,1528864162.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:23.057Z,1528864163.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:23.466Z,1528864163.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:23.864Z,1528864163.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:24.263Z,1528864164.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:24.644Z,1528864164.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:25.041Z,1528864165.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:25.437Z,1528864165.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:25.841Z,1528864165.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:26.270Z,1528864166.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:26.670Z,1528864166.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:27.071Z,1528864167.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:27.448Z,1528864167.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:27.847Z,1528864167.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:28.243Z,1528864168.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:28.651Z,1528864168.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:29.041Z,1528864169.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:29.456Z,1528864169.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:29.856Z,1528864169.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:30.252Z,1528864170.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:30.648Z,1528864170.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:31.052Z,1528864171.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:31.448Z,1528864171.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:31.846Z,1528864171.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:32.255Z,1528864172.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:32.599Z,1528864172.599 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T04:29:32.599Z,1528864172.599 [NAL9602] Data Fault, FailCount= 1
2018-06-13T04:29:32.599Z,1528864172.599 [NAL9602](ERROR): Data Fault
2018-06-13T04:29:32.670Z,1528864172.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:32.753Z,1528864172.753 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T04:29:33.002Z,1528864173.002 [NAL9602](INFO): Powering down
2018-06-13T04:29:33.059Z,1528864173.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:33.447Z,1528864173.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:33.846Z,1528864173.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:33.925Z,1528864173.925 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T04:29:33.925Z,1528864173.925 [NAL9602] No Fault, FailCount= 1
2018-06-13T04:29:34.242Z,1528864174.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:34.652Z,1528864174.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:35.039Z,1528864175.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:35.444Z,1528864175.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:35.848Z,1528864175.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:36.239Z,1528864176.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:36.647Z,1528864176.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:37.044Z,1528864177.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:37.441Z,1528864177.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:37.846Z,1528864177.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:38.252Z,1528864178.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:38.646Z,1528864178.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:39.046Z,1528864179.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:39.448Z,1528864179.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:39.841Z,1528864179.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:40.247Z,1528864180.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:40.644Z,1528864180.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:41.041Z,1528864181.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:41.446Z,1528864181.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:41.846Z,1528864181.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:42.251Z,1528864182.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:42.646Z,1528864182.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:43.047Z,1528864183.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:43.441Z,1528864183.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:43.852Z,1528864183.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:44.249Z,1528864184.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:44.647Z,1528864184.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:45.046Z,1528864185.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:45.445Z,1528864185.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:45.848Z,1528864185.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:46.247Z,1528864186.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:46.646Z,1528864186.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:47.051Z,1528864187.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:47.444Z,1528864187.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:47.847Z,1528864187.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:48.246Z,1528864188.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:48.646Z,1528864188.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:49.046Z,1528864189.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:49.441Z,1528864189.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:49.848Z,1528864189.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:50.243Z,1528864190.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:50.653Z,1528864190.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:51.051Z,1528864191.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:51.451Z,1528864191.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:51.851Z,1528864191.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:52.256Z,1528864192.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:52.646Z,1528864192.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:53.049Z,1528864193.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:53.446Z,1528864193.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:53.851Z,1528864193.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:54.245Z,1528864194.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:54.646Z,1528864194.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:55.050Z,1528864195.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:55.448Z,1528864195.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:55.845Z,1528864195.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:56.249Z,1528864196.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:56.650Z,1528864196.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:57.053Z,1528864197.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:57.448Z,1528864197.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:57.848Z,1528864197.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:58.252Z,1528864198.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:58.649Z,1528864198.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:59.048Z,1528864199.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:59.452Z,1528864199.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:29:59.851Z,1528864199.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:00.244Z,1528864200.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:00.652Z,1528864200.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:01.048Z,1528864201.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:01.450Z,1528864201.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:01.848Z,1528864201.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:02.249Z,1528864202.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:02.644Z,1528864202.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:03.052Z,1528864203.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:03.410Z,1528864203.410 [NAL9602](INFO): Powering up NAL9602
2018-06-13T04:30:03.456Z,1528864203.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:03.844Z,1528864203.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:04.245Z,1528864204.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:04.648Z,1528864204.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:05.052Z,1528864205.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:05.452Z,1528864205.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:05.848Z,1528864205.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:06.249Z,1528864206.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:06.649Z,1528864206.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:07.048Z,1528864207.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:07.448Z,1528864207.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:07.852Z,1528864207.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:08.250Z,1528864208.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:08.648Z,1528864208.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:09.052Z,1528864209.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:09.448Z,1528864209.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:09.850Z,1528864209.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:10.252Z,1528864210.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:10.648Z,1528864210.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:11.056Z,1528864211.056 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:11.056Z,1528864211.056 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2018-06-13T04:30:11.056Z,1528864211.056 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:30:11.058Z,1528864211.058 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:11.058Z,1528864211.058 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22
2018-06-13T04:30:11.058Z,1528864211.058 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:30:11.060Z,1528864211.060 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:11.060Z,1528864211.060 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2018-06-13T04:30:11.060Z,1528864211.060 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:30:11.137Z,1528864211.137 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:30:11.137Z,1528864211.137 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:30:11.138Z,1528864211.138 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:30:11.454Z,1528864211.454 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T04:30:11.454Z,1528864211.454 [Default:CheckIn:C.Wait] Stopped
2018-06-13T04:30:11.454Z,1528864211.454 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T04:30:11.455Z,1528864211.455 [Default:CheckIn:D] Running Loop=1
2018-06-13T04:30:11.526Z,1528864211.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:30:11.526Z,1528864211.526 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2018-06-13T04:30:11.527Z,1528864211.527 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:30:11.527Z,1528864211.527 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22
2018-06-13T04:30:11.527Z,1528864211.527 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:30:11.527Z,1528864211.527 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2018-06-13T04:30:11.851Z,1528864211.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:30:11.851Z,1528864211.851 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:30:11.852Z,1528864211.852 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:30:11.852Z,1528864211.852 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:30:11.852Z,1528864211.852 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:30:11.853Z,1528864211.853 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:30:11.853Z,1528864211.853 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:30:11.854Z,1528864211.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:30:11.854Z,1528864211.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:30:11.855Z,1528864211.855 [Default:CheckIn:D] Stopped
2018-06-13T04:30:11.855Z,1528864211.855 [Default:CheckIn:E] Running Loop=1
2018-06-13T04:30:14.967Z,1528864214.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2018-06-13T04:30:14.968Z,1528864214.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:14.972Z,1528864214.972 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.973503 min 
2018-06-13T04:30:14.972Z,1528864214.972 [Default:CheckIn:E] Stopped
2018-06-13T04:30:14.972Z,1528864214.972 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T04:30:14.972Z,1528864214.972 [Default:CheckIn] Stopped
2018-06-13T04:30:14.972Z,1528864214.972 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T04:30:14.972Z,1528864214.972 [Default:CheckIn](INFO): Running loop #7
2018-06-13T04:30:14.972Z,1528864214.972 [Default:CheckIn] Running Loop=7
2018-06-13T04:30:14.972Z,1528864214.972 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T04:30:14.973Z,1528864214.973 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T04:30:15.119Z,1528864215.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T04:30:15.120Z,1528864215.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:15.466Z,1528864215.466 [NAL9602](INFO): NAL9602 initialized
2018-06-13T04:30:15.500Z,1528864215.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:30:15.518Z,1528864215.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:15.904Z,1528864215.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:30:15.922Z,1528864215.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:16.330Z,1528864216.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T04:30:16.330Z,1528864216.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:16.707Z,1528864216.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T04:30:16.708Z,1528864216.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:17.099Z,1528864217.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:30:17.100Z,1528864217.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:17.504Z,1528864217.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:30:17.505Z,1528864217.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:17.898Z,1528864217.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:30:17.899Z,1528864217.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:18.310Z,1528864218.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T04:30:18.311Z,1528864218.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:18.710Z,1528864218.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T04:30:18.711Z,1528864218.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:19.112Z,1528864219.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T04:30:19.113Z,1528864219.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:19.501Z,1528864219.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:30:19.502Z,1528864219.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:19.903Z,1528864219.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:30:19.904Z,1528864219.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:20.308Z,1528864220.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T04:30:20.309Z,1528864220.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:20.701Z,1528864220.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:30:20.702Z,1528864220.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:21.112Z,1528864221.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T04:30:21.112Z,1528864221.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:21.507Z,1528864221.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T04:30:21.508Z,1528864221.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:21.911Z,1528864221.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T04:30:21.912Z,1528864221.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:22.304Z,1528864222.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:30:22.305Z,1528864222.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:22.700Z,1528864222.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:30:22.701Z,1528864222.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:23.107Z,1528864223.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T04:30:23.108Z,1528864223.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:23.510Z,1528864223.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T04:30:23.511Z,1528864223.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:23.912Z,1528864223.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T04:30:23.913Z,1528864223.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:24.302Z,1528864224.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:30:24.303Z,1528864224.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:24.703Z,1528864224.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:30:24.704Z,1528864224.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:25.112Z,1528864225.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T04:30:25.113Z,1528864225.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:25.510Z,1528864225.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T04:30:25.511Z,1528864225.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:25.911Z,1528864225.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T04:30:25.912Z,1528864225.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:26.308Z,1528864226.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T04:30:26.309Z,1528864226.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:26.702Z,1528864226.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:30:26.703Z,1528864226.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:27.116Z,1528864227.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T04:30:27.133Z,1528864227.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:27.511Z,1528864227.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T04:30:27.512Z,1528864227.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:27.908Z,1528864227.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T04:30:27.910Z,1528864227.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:28.312Z,1528864228.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T04:30:28.313Z,1528864228.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:28.702Z,1528864228.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:30:28.703Z,1528864228.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:29.112Z,1528864229.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T04:30:29.113Z,1528864229.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:29.511Z,1528864229.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T04:30:29.512Z,1528864229.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:29.908Z,1528864229.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T04:30:29.909Z,1528864229.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:30.303Z,1528864230.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:30:30.304Z,1528864230.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:30.727Z,1528864230.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T04:30:30.728Z,1528864230.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:31.112Z,1528864231.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:31.511Z,1528864231.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:31.911Z,1528864231.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:32.311Z,1528864232.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:32.709Z,1528864232.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:33.112Z,1528864233.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:33.511Z,1528864233.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:33.912Z,1528864233.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:34.305Z,1528864234.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:34.702Z,1528864234.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:35.109Z,1528864235.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:35.511Z,1528864235.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:35.910Z,1528864235.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:36.304Z,1528864236.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:36.705Z,1528864236.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:37.116Z,1528864237.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:37.514Z,1528864237.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:37.919Z,1528864237.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:38.307Z,1528864238.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:38.704Z,1528864238.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:39.116Z,1528864239.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:39.517Z,1528864239.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:39.909Z,1528864239.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:40.309Z,1528864240.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:40.704Z,1528864240.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:41.100Z,1528864241.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:41.517Z,1528864241.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:41.915Z,1528864241.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:42.314Z,1528864242.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:42.704Z,1528864242.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:43.106Z,1528864243.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:43.504Z,1528864243.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:43.912Z,1528864243.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:44.313Z,1528864244.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:44.712Z,1528864244.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:45.124Z,1528864245.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:45.503Z,1528864245.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:45.901Z,1528864245.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:46.306Z,1528864246.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:46.712Z,1528864246.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:47.104Z,1528864247.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:47.517Z,1528864247.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:47.916Z,1528864247.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:48.309Z,1528864248.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:48.708Z,1528864248.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:49.109Z,1528864249.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:49.505Z,1528864249.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:49.910Z,1528864249.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:50.319Z,1528864250.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:50.716Z,1528864250.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:51.118Z,1528864251.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:51.516Z,1528864251.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:51.908Z,1528864251.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:52.310Z,1528864252.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:52.713Z,1528864252.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:53.111Z,1528864253.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:53.524Z,1528864253.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:53.928Z,1528864253.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:54.314Z,1528864254.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:54.711Z,1528864254.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:55.124Z,1528864255.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:55.521Z,1528864255.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:55.899Z,1528864255.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:56.332Z,1528864256.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:56.728Z,1528864256.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:57.129Z,1528864257.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:57.508Z,1528864257.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:57.902Z,1528864257.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:58.308Z,1528864258.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:58.728Z,1528864258.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:59.103Z,1528864259.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:59.532Z,1528864259.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:30:59.912Z,1528864259.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:00.311Z,1528864260.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:00.704Z,1528864260.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:01.106Z,1528864261.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:01.506Z,1528864261.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:01.918Z,1528864261.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:02.312Z,1528864262.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:02.714Z,1528864262.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:03.117Z,1528864263.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:03.505Z,1528864263.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:03.904Z,1528864263.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:04.312Z,1528864264.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:04.718Z,1528864264.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:05.102Z,1528864265.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:05.516Z,1528864265.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:05.916Z,1528864265.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:06.316Z,1528864266.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:06.709Z,1528864266.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:07.125Z,1528864267.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:07.521Z,1528864267.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:07.924Z,1528864267.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:08.321Z,1528864268.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:08.713Z,1528864268.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:09.120Z,1528864269.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:09.520Z,1528864269.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:09.920Z,1528864269.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:10.304Z,1528864270.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:10.724Z,1528864270.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:11.124Z,1528864271.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:11.523Z,1528864271.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:11.924Z,1528864271.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:15.020Z,1528864275.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:15.172Z,1528864275.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:15.567Z,1528864275.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:15.966Z,1528864275.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:16.370Z,1528864276.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:16.768Z,1528864276.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:17.175Z,1528864277.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:17.575Z,1528864277.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:17.976Z,1528864277.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:18.370Z,1528864278.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:18.770Z,1528864278.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:19.172Z,1528864279.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:19.573Z,1528864279.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:19.976Z,1528864279.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:20.371Z,1528864280.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:20.769Z,1528864280.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:21.172Z,1528864281.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:21.575Z,1528864281.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:21.977Z,1528864281.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:22.372Z,1528864282.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:22.776Z,1528864282.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:23.188Z,1528864283.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:23.584Z,1528864283.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:23.978Z,1528864283.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:24.368Z,1528864284.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:24.770Z,1528864284.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:25.171Z,1528864285.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:25.581Z,1528864285.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:25.980Z,1528864285.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:26.377Z,1528864286.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:26.770Z,1528864286.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:27.170Z,1528864287.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:27.577Z,1528864287.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:27.970Z,1528864287.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:28.380Z,1528864288.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:28.788Z,1528864288.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:29.181Z,1528864289.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:29.568Z,1528864289.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:29.979Z,1528864289.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:30.369Z,1528864290.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:30.773Z,1528864290.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:31.168Z,1528864291.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:31.581Z,1528864291.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:31.985Z,1528864291.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:32.377Z,1528864292.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:32.770Z,1528864292.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:33.171Z,1528864293.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:33.574Z,1528864293.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:33.969Z,1528864293.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:34.381Z,1528864294.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:34.793Z,1528864294.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:35.178Z,1528864295.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:35.576Z,1528864295.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:35.976Z,1528864295.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:36.372Z,1528864296.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:36.772Z,1528864296.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:37.180Z,1528864297.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:37.582Z,1528864297.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:37.983Z,1528864297.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:38.380Z,1528864298.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:38.771Z,1528864298.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:39.168Z,1528864299.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:39.576Z,1528864299.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:39.969Z,1528864299.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:40.385Z,1528864300.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:40.784Z,1528864300.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:41.180Z,1528864301.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:41.570Z,1528864301.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:41.972Z,1528864301.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:42.374Z,1528864302.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:42.780Z,1528864302.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:43.172Z,1528864303.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:43.582Z,1528864303.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:43.984Z,1528864303.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:44.381Z,1528864304.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:44.770Z,1528864304.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:45.174Z,1528864305.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:45.574Z,1528864305.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:45.982Z,1528864305.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:46.382Z,1528864306.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:46.781Z,1528864306.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:47.183Z,1528864307.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:47.584Z,1528864307.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:47.992Z,1528864307.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:48.384Z,1528864308.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:48.773Z,1528864308.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:49.180Z,1528864309.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:49.586Z,1528864309.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:49.983Z,1528864309.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:50.382Z,1528864310.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:50.780Z,1528864310.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:51.174Z,1528864311.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:51.574Z,1528864311.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:51.974Z,1528864311.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:52.388Z,1528864312.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:52.785Z,1528864312.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:53.179Z,1528864313.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:53.576Z,1528864313.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:53.983Z,1528864313.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:54.372Z,1528864314.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:54.777Z,1528864314.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:55.178Z,1528864315.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:55.584Z,1528864315.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:55.988Z,1528864315.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:56.384Z,1528864316.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:56.774Z,1528864316.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:57.188Z,1528864317.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:57.571Z,1528864317.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:57.962Z,1528864317.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:58.396Z,1528864318.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:58.794Z,1528864318.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:59.188Z,1528864319.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:59.566Z,1528864319.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:31:59.967Z,1528864319.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:00.397Z,1528864320.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:00.776Z,1528864320.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:01.171Z,1528864321.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:01.574Z,1528864321.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:01.999Z,1528864321.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:02.377Z,1528864322.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:02.771Z,1528864322.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:03.171Z,1528864323.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:03.589Z,1528864323.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:03.963Z,1528864323.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:04.376Z,1528864324.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:04.780Z,1528864324.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:05.202Z,1528864325.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:05.567Z,1528864325.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:05.971Z,1528864325.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:06.372Z,1528864326.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:06.803Z,1528864326.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:07.166Z,1528864327.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:07.578Z,1528864327.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:07.979Z,1528864327.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:08.381Z,1528864328.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:08.763Z,1528864328.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:09.167Z,1528864329.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:09.571Z,1528864329.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:09.967Z,1528864329.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:10.375Z,1528864330.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:10.780Z,1528864330.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:11.181Z,1528864331.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:11.588Z,1528864331.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:11.970Z,1528864331.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:15.076Z,1528864335.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:15.228Z,1528864335.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:15.632Z,1528864335.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:16.027Z,1528864336.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:16.424Z,1528864336.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:16.824Z,1528864336.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:17.215Z,1528864337.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:17.614Z,1528864337.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:18.025Z,1528864338.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:18.479Z,1528864338.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:18.826Z,1528864338.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:19.225Z,1528864339.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:19.616Z,1528864339.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:20.016Z,1528864340.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:20.416Z,1528864340.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:20.812Z,1528864340.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:21.232Z,1528864341.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:21.625Z,1528864341.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:22.028Z,1528864342.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:22.426Z,1528864342.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:22.831Z,1528864342.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:23.223Z,1528864343.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:23.626Z,1528864343.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:24.004Z,1528864344.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:24.431Z,1528864344.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:24.835Z,1528864344.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.404532 seconds old.
2018-06-13T04:32:24.836Z,1528864344.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:24.837Z,1528864344.837 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.404958 seconds old.
2018-06-13T04:32:24.838Z,1528864344.838 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.405563 seconds old.
2018-06-13T04:32:25.229Z,1528864345.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.798271 seconds old.
2018-06-13T04:32:25.230Z,1528864345.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:25.230Z,1528864345.230 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.798683 seconds old.
2018-06-13T04:32:25.231Z,1528864345.231 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.799057 seconds old.
2018-06-13T04:32:25.606Z,1528864345.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.176256 seconds old.
2018-06-13T04:32:25.607Z,1528864345.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:25.608Z,1528864345.608 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.176567 seconds old.
2018-06-13T04:32:25.626Z,1528864345.626 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.193253 seconds old.
2018-06-13T04:32:26.039Z,1528864346.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.608620 seconds old.
2018-06-13T04:32:26.040Z,1528864346.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:26.041Z,1528864346.041 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.608928 seconds old.
2018-06-13T04:32:26.042Z,1528864346.042 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.609530 seconds old.
2018-06-13T04:32:26.433Z,1528864346.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:26.814Z,1528864346.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:27.211Z,1528864347.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:27.644Z,1528864347.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:28.037Z,1528864348.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:28.437Z,1528864348.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:28.816Z,1528864348.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:29.237Z,1528864349.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:29.611Z,1528864349.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:30.013Z,1528864350.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:30.442Z,1528864350.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:30.844Z,1528864350.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:31.243Z,1528864351.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:31.614Z,1528864351.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:32.012Z,1528864352.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:32.440Z,1528864352.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:32.809Z,1528864352.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:33.213Z,1528864353.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:33.641Z,1528864353.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:34.051Z,1528864354.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:34.446Z,1528864354.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:34.815Z,1528864354.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:35.215Z,1528864355.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:35.611Z,1528864355.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:36.012Z,1528864356.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:36.424Z,1528864356.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:36.823Z,1528864356.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:37.244Z,1528864357.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:37.612Z,1528864357.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:38.011Z,1528864358.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:38.424Z,1528864358.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:38.812Z,1528864358.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:39.211Z,1528864359.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:39.622Z,1528864359.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:40.023Z,1528864360.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:40.447Z,1528864360.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:40.816Z,1528864360.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:41.248Z,1528864361.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:41.618Z,1528864361.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:42.015Z,1528864362.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:42.420Z,1528864362.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:42.822Z,1528864362.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:43.224Z,1528864363.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:43.612Z,1528864363.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:44.012Z,1528864364.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:44.411Z,1528864364.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:44.808Z,1528864364.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:45.213Z,1528864365.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:45.616Z,1528864365.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:46.021Z,1528864366.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:46.425Z,1528864366.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:46.813Z,1528864366.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:47.219Z,1528864367.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:47.613Z,1528864367.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:48.015Z,1528864368.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:48.421Z,1528864368.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:48.823Z,1528864368.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:49.221Z,1528864369.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:49.611Z,1528864369.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:50.013Z,1528864370.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:50.413Z,1528864370.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:50.821Z,1528864370.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:51.212Z,1528864371.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:51.621Z,1528864371.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:52.023Z,1528864372.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:52.425Z,1528864372.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:52.819Z,1528864372.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:53.212Z,1528864373.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:53.620Z,1528864373.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:54.004Z,1528864374.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:54.430Z,1528864374.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:54.832Z,1528864374.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:55.231Z,1528864375.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:55.604Z,1528864375.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:56.012Z,1528864376.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:56.407Z,1528864376.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:56.804Z,1528864376.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:57.207Z,1528864377.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:57.637Z,1528864377.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:58.019Z,1528864378.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:58.419Z,1528864378.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:58.809Z,1528864378.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:59.207Z,1528864379.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:32:59.611Z,1528864379.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:00.015Z,1528864380.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:00.417Z,1528864380.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:00.819Z,1528864380.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:01.216Z,1528864381.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:01.612Z,1528864381.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:02.011Z,1528864382.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:02.413Z,1528864382.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:02.808Z,1528864382.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:03.211Z,1528864383.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:03.617Z,1528864383.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:04.020Z,1528864384.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:04.424Z,1528864384.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:04.813Z,1528864384.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:05.214Z,1528864385.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:05.613Z,1528864385.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:06.021Z,1528864386.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:06.427Z,1528864386.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:06.825Z,1528864386.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:07.222Z,1528864387.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:07.618Z,1528864387.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:08.013Z,1528864388.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:08.415Z,1528864388.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:08.815Z,1528864388.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:09.220Z,1528864389.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:09.622Z,1528864389.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:10.023Z,1528864390.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:10.421Z,1528864390.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:10.820Z,1528864390.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:11.220Z,1528864391.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:11.618Z,1528864391.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:12.025Z,1528864392.025 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:12.025Z,1528864392.025 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2018-06-13T04:33:12.025Z,1528864392.025 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:33:12.027Z,1528864392.027 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:12.027Z,1528864392.027 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23
2018-06-13T04:33:12.027Z,1528864392.027 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:33:12.028Z,1528864392.028 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:12.029Z,1528864392.029 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2018-06-13T04:33:12.029Z,1528864392.029 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:33:12.101Z,1528864392.101 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:33:12.101Z,1528864392.101 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:33:12.102Z,1528864392.102 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:33:15.205Z,1528864395.205 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:33:15.205Z,1528864395.205 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2018-06-13T04:33:15.206Z,1528864395.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:33:15.206Z,1528864395.206 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23
2018-06-13T04:33:15.206Z,1528864395.206 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:33:15.206Z,1528864395.206 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2018-06-13T04:33:15.303Z,1528864395.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:33:15.304Z,1528864395.304 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:33:15.304Z,1528864395.304 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:33:15.304Z,1528864395.304 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:33:15.309Z,1528864395.309 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:33:15.309Z,1528864395.309 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:33:15.310Z,1528864395.310 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:33:15.310Z,1528864395.310 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:33:15.310Z,1528864395.310 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:33:15.696Z,1528864395.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T04:33:15.698Z,1528864395.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:16.052Z,1528864396.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:33:16.062Z,1528864396.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:16.482Z,1528864396.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T04:33:16.483Z,1528864396.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:16.857Z,1528864396.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:33:16.858Z,1528864396.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:17.258Z,1528864397.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:33:17.258Z,1528864397.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:17.667Z,1528864397.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:33:17.668Z,1528864397.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:18.067Z,1528864398.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:33:18.068Z,1528864398.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:18.466Z,1528864398.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:33:18.468Z,1528864398.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:18.859Z,1528864398.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:33:18.860Z,1528864398.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:19.260Z,1528864399.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:33:19.262Z,1528864399.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:19.655Z,1528864399.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:33:19.656Z,1528864399.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:20.059Z,1528864400.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:33:20.060Z,1528864400.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:20.468Z,1528864400.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:33:20.469Z,1528864400.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:20.868Z,1528864400.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:33:20.869Z,1528864400.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:21.272Z,1528864401.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:33:21.273Z,1528864401.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:21.662Z,1528864401.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:33:21.663Z,1528864401.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:22.062Z,1528864402.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:33:22.063Z,1528864402.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:22.468Z,1528864402.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:33:22.469Z,1528864402.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:22.862Z,1528864402.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:33:22.863Z,1528864402.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:23.269Z,1528864403.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:33:23.271Z,1528864403.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:23.676Z,1528864403.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T04:33:23.677Z,1528864403.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:24.075Z,1528864404.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T04:33:24.076Z,1528864404.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:24.479Z,1528864404.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T04:33:24.480Z,1528864404.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:24.861Z,1528864404.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:33:24.862Z,1528864404.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:25.269Z,1528864405.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:33:25.270Z,1528864405.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:25.662Z,1528864405.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:33:25.663Z,1528864405.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:26.068Z,1528864406.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:33:26.074Z,1528864406.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:26.473Z,1528864406.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:33:26.474Z,1528864406.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:26.878Z,1528864406.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T04:33:26.878Z,1528864406.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:27.271Z,1528864407.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:33:27.272Z,1528864407.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:27.652Z,1528864407.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:33:27.670Z,1528864407.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:28.053Z,1528864408.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:33:28.054Z,1528864408.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:28.451Z,1528864408.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:33:28.452Z,1528864408.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:28.858Z,1528864408.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:33:28.859Z,1528864408.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:29.286Z,1528864409.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T04:33:29.287Z,1528864409.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:29.688Z,1528864409.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T04:33:29.694Z,1528864409.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:30.066Z,1528864410.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:33:30.067Z,1528864410.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:30.462Z,1528864410.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:33:30.463Z,1528864410.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:30.857Z,1528864410.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:33:30.858Z,1528864410.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:31.257Z,1528864411.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:33:31.258Z,1528864411.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:31.656Z,1528864411.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:33:31.657Z,1528864411.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:32.059Z,1528864412.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:32.468Z,1528864412.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:32.867Z,1528864412.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:33.268Z,1528864413.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:33.659Z,1528864413.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:34.055Z,1528864414.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:34.458Z,1528864414.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:34.861Z,1528864414.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:35.260Z,1528864415.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:35.665Z,1528864415.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:36.067Z,1528864416.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:36.465Z,1528864416.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:36.858Z,1528864416.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:37.260Z,1528864417.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:37.655Z,1528864417.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:38.056Z,1528864418.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:38.464Z,1528864418.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:38.864Z,1528864418.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:39.268Z,1528864419.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:39.658Z,1528864419.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:40.055Z,1528864420.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:40.459Z,1528864420.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:40.861Z,1528864420.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:41.255Z,1528864421.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:41.667Z,1528864421.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:42.067Z,1528864422.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:42.468Z,1528864422.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:42.868Z,1528864422.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:43.262Z,1528864423.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:43.656Z,1528864423.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:44.058Z,1528864424.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:44.468Z,1528864424.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:44.867Z,1528864424.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:45.268Z,1528864425.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:45.660Z,1528864425.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:46.056Z,1528864426.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:46.459Z,1528864426.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:46.859Z,1528864426.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:47.255Z,1528864427.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:47.667Z,1528864427.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:48.068Z,1528864428.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:48.464Z,1528864428.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:48.859Z,1528864428.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:49.261Z,1528864429.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:49.656Z,1528864429.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:50.059Z,1528864430.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:50.468Z,1528864430.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:50.871Z,1528864430.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:51.267Z,1528864431.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:51.659Z,1528864431.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:52.056Z,1528864432.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:52.460Z,1528864432.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:52.871Z,1528864432.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:53.256Z,1528864433.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:53.668Z,1528864433.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:54.072Z,1528864434.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:54.468Z,1528864434.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:54.861Z,1528864434.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:55.261Z,1528864435.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:55.693Z,1528864435.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:56.058Z,1528864436.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:56.468Z,1528864436.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:56.868Z,1528864436.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:57.267Z,1528864437.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:57.660Z,1528864437.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:58.055Z,1528864438.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:58.472Z,1528864438.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:58.872Z,1528864438.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:59.268Z,1528864439.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:33:59.661Z,1528864439.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:00.058Z,1528864440.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:00.468Z,1528864440.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:00.868Z,1528864440.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:01.272Z,1528864441.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:01.660Z,1528864441.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:02.061Z,1528864442.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:02.468Z,1528864442.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:02.868Z,1528864442.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:03.269Z,1528864443.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:03.664Z,1528864443.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:04.056Z,1528864444.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:04.470Z,1528864444.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:04.867Z,1528864444.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:05.270Z,1528864445.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:05.663Z,1528864445.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:06.058Z,1528864446.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:06.470Z,1528864446.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:06.872Z,1528864446.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:07.268Z,1528864447.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:07.656Z,1528864447.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:08.065Z,1528864448.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:08.470Z,1528864448.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:08.870Z,1528864448.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:09.274Z,1528864449.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:09.665Z,1528864449.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:10.066Z,1528864450.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:10.471Z,1528864450.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:10.871Z,1528864450.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:11.270Z,1528864451.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:11.668Z,1528864451.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:12.068Z,1528864452.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:15.199Z,1528864455.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:15.382Z,1528864455.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:15.749Z,1528864455.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:16.160Z,1528864456.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:16.557Z,1528864456.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:16.932Z,1528864456.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:17.328Z,1528864457.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:17.743Z,1528864457.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:18.142Z,1528864458.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:18.543Z,1528864458.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:18.933Z,1528864458.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:19.334Z,1528864459.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:19.732Z,1528864459.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:20.144Z,1528864460.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:20.543Z,1528864460.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:20.944Z,1528864460.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:21.344Z,1528864461.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:21.734Z,1528864461.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:22.134Z,1528864462.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:22.536Z,1528864462.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:22.941Z,1528864462.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:23.341Z,1528864463.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:23.749Z,1528864463.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:24.152Z,1528864464.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:24.545Z,1528864464.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:24.940Z,1528864464.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:25.344Z,1528864465.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:25.750Z,1528864465.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:26.136Z,1528864466.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:26.551Z,1528864466.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:26.947Z,1528864466.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:27.345Z,1528864467.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:27.741Z,1528864467.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:28.137Z,1528864468.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:28.545Z,1528864468.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:28.948Z,1528864468.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:29.344Z,1528864469.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:29.750Z,1528864469.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:30.150Z,1528864470.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:30.547Z,1528864470.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:30.952Z,1528864470.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:31.327Z,1528864471.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:31.749Z,1528864471.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:32.136Z,1528864472.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:32.563Z,1528864472.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:32.958Z,1528864472.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:33.343Z,1528864473.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:33.733Z,1528864473.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:34.134Z,1528864474.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:34.534Z,1528864474.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:34.934Z,1528864474.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:35.340Z,1528864475.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:35.740Z,1528864475.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:36.142Z,1528864476.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:36.543Z,1528864476.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:36.934Z,1528864476.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:37.333Z,1528864477.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:37.736Z,1528864477.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:38.136Z,1528864478.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:38.537Z,1528864478.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:38.943Z,1528864478.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:39.339Z,1528864479.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:39.739Z,1528864479.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:40.135Z,1528864480.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:40.540Z,1528864480.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:40.934Z,1528864480.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:41.336Z,1528864481.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:41.740Z,1528864481.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:42.144Z,1528864482.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:42.543Z,1528864482.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:42.933Z,1528864482.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:43.334Z,1528864483.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:43.740Z,1528864483.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:44.134Z,1528864484.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:44.539Z,1528864484.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:44.943Z,1528864484.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:45.344Z,1528864485.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:45.733Z,1528864485.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:46.135Z,1528864486.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:46.540Z,1528864486.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:46.943Z,1528864486.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:47.335Z,1528864487.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:47.739Z,1528864487.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:48.140Z,1528864488.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:48.543Z,1528864488.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:48.934Z,1528864488.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:49.335Z,1528864489.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:49.736Z,1528864489.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:50.133Z,1528864490.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:50.563Z,1528864490.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:50.939Z,1528864490.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:51.339Z,1528864491.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:51.740Z,1528864491.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:52.135Z,1528864492.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:52.544Z,1528864492.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:52.968Z,1528864492.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:53.343Z,1528864493.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:53.736Z,1528864493.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:54.135Z,1528864494.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:54.541Z,1528864494.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:54.944Z,1528864494.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:55.345Z,1528864495.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:55.736Z,1528864495.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:56.135Z,1528864496.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:56.544Z,1528864496.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:56.940Z,1528864496.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:57.340Z,1528864497.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:57.746Z,1528864497.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:58.132Z,1528864498.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:58.548Z,1528864498.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:58.948Z,1528864498.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:59.344Z,1528864499.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:34:59.742Z,1528864499.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:00.136Z,1528864500.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:00.545Z,1528864500.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:00.948Z,1528864500.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:01.343Z,1528864501.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:01.732Z,1528864501.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:02.136Z,1528864502.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:02.548Z,1528864502.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:02.944Z,1528864502.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:03.343Z,1528864503.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:03.735Z,1528864503.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:04.131Z,1528864504.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:04.544Z,1528864504.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:04.948Z,1528864504.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:05.344Z,1528864505.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:05.736Z,1528864505.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:06.150Z,1528864506.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:06.545Z,1528864506.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:06.948Z,1528864506.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:07.344Z,1528864507.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:07.736Z,1528864507.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:08.136Z,1528864508.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:08.543Z,1528864508.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:08.944Z,1528864508.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:09.348Z,1528864509.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:09.737Z,1528864509.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:10.131Z,1528864510.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:10.540Z,1528864510.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:10.948Z,1528864510.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:11.346Z,1528864511.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:11.737Z,1528864511.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:12.144Z,1528864512.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:15.259Z,1528864515.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:15.263Z,1528864515.263 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T04:30:14.0Z
2018-06-13T04:35:15.263Z,1528864515.263 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T04:35:15.263Z,1528864515.263 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T04:35:15.458Z,1528864515.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:16.567Z,1528864516.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:16.734Z,1528864516.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:17.143Z,1528864517.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:17.542Z,1528864517.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:20.641Z,1528864520.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:20.736Z,1528864520.736 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0028.lzma
2018-06-13T04:35:20.807Z,1528864520.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:21.199Z,1528864521.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:21.533Z,1528864521.533 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0028.lzma.bak
2018-06-13T04:35:21.534Z,1528864521.534 [DataOverHttps](INFO): SBD MOMSN=8328581
2018-06-13T04:35:21.608Z,1528864521.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:23.459Z,1528864523.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:23.603Z,1528864523.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:23.000Z,1528864524.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:27.105Z,1528864527.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:27.253Z,1528864527.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:27.657Z,1528864527.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:28.069Z,1528864528.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:28.457Z,1528864528.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:28.853Z,1528864528.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:29.257Z,1528864529.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:29.656Z,1528864529.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:30.057Z,1528864530.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:33.166Z,1528864533.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:33.261Z,1528864533.261 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20180613T032335/Express0029.lzma
2018-06-13T04:35:33.344Z,1528864533.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:33.725Z,1528864533.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:34.062Z,1528864534.062 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0029.lzma.bak
2018-06-13T04:35:34.062Z,1528864534.062 [DataOverHttps](INFO): SBD MOMSN=8328583
2018-06-13T04:35:34.140Z,1528864534.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:36.017Z,1528864536.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:36.020Z,1528864536.020 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T04:35:36.020Z,1528864536.020 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T04:35:36.020Z,1528864536.020 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T04:35:36.172Z,1528864536.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:36.578Z,1528864536.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:39.688Z,1528864539.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:39.884Z,1528864539.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:40.265Z,1528864540.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:40.646Z,1528864540.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:41.044Z,1528864541.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:41.444Z,1528864541.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:41.873Z,1528864541.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:42.271Z,1528864542.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:42.651Z,1528864542.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:43.039Z,1528864543.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:43.442Z,1528864543.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:43.845Z,1528864543.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:44.240Z,1528864544.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:44.652Z,1528864544.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:45.055Z,1528864545.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:45.471Z,1528864545.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:45.852Z,1528864545.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:46.250Z,1528864546.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:46.646Z,1528864546.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:47.047Z,1528864547.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:47.451Z,1528864547.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:47.870Z,1528864547.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:48.256Z,1528864548.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:48.656Z,1528864548.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:49.044Z,1528864549.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:49.448Z,1528864549.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:49.849Z,1528864549.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:50.241Z,1528864550.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:50.651Z,1528864550.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:51.060Z,1528864551.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:51.456Z,1528864551.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:51.847Z,1528864551.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:52.249Z,1528864552.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:52.646Z,1528864552.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:53.048Z,1528864553.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:53.453Z,1528864553.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:53.856Z,1528864553.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:54.256Z,1528864554.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:54.653Z,1528864554.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:55.040Z,1528864555.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:55.446Z,1528864555.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:55.844Z,1528864555.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:56.241Z,1528864556.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:56.730Z,1528864556.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:57.148Z,1528864557.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:57.478Z,1528864557.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:57.883Z,1528864557.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:58.310Z,1528864558.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:58.664Z,1528864558.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:59.062Z,1528864559.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:59.468Z,1528864559.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:35:59.834Z,1528864559.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:00.258Z,1528864560.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:00.665Z,1528864560.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:01.069Z,1528864561.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:01.464Z,1528864561.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:01.836Z,1528864561.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:02.257Z,1528864562.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:02.663Z,1528864562.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:03.070Z,1528864563.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:03.447Z,1528864563.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:03.845Z,1528864563.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:04.240Z,1528864564.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:04.667Z,1528864564.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:05.067Z,1528864565.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:05.469Z,1528864565.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:05.844Z,1528864565.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:06.244Z,1528864566.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:06.670Z,1528864566.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:07.047Z,1528864567.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:07.468Z,1528864567.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:07.845Z,1528864567.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:08.240Z,1528864568.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:08.669Z,1528864568.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:09.070Z,1528864569.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:09.469Z,1528864569.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:09.865Z,1528864569.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:10.284Z,1528864570.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:10.675Z,1528864570.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:11.072Z,1528864571.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:11.477Z,1528864571.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:11.848Z,1528864571.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:12.248Z,1528864572.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:12.678Z,1528864572.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:13.047Z,1528864573.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:13.471Z,1528864573.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:13.844Z,1528864573.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:14.245Z,1528864574.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:14.655Z,1528864574.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:15.048Z,1528864575.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:15.449Z,1528864575.449 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:15.449Z,1528864575.449 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2018-06-13T04:36:15.450Z,1528864575.450 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:36:15.451Z,1528864575.451 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:15.451Z,1528864575.451 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24
2018-06-13T04:36:15.451Z,1528864575.451 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:36:15.453Z,1528864575.453 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:15.453Z,1528864575.453 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2018-06-13T04:36:15.453Z,1528864575.453 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:36:15.545Z,1528864575.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:36:15.545Z,1528864575.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:36:15.546Z,1528864575.546 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:36:15.929Z,1528864575.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:36:15.929Z,1528864575.929 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2018-06-13T04:36:15.930Z,1528864575.930 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:36:15.930Z,1528864575.930 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24
2018-06-13T04:36:15.930Z,1528864575.930 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:36:15.930Z,1528864575.930 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2018-06-13T04:36:16.258Z,1528864576.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:36:16.258Z,1528864576.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:36:16.258Z,1528864576.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:36:16.259Z,1528864576.259 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:36:16.259Z,1528864576.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:36:16.259Z,1528864576.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:36:16.260Z,1528864576.260 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:36:16.260Z,1528864576.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:36:16.261Z,1528864576.261 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:36:16.655Z,1528864576.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:36:16.656Z,1528864576.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:17.064Z,1528864577.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:36:17.065Z,1528864577.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:17.464Z,1528864577.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:36:17.465Z,1528864577.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:17.850Z,1528864577.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:36:17.851Z,1528864577.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:18.260Z,1528864578.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:36:18.261Z,1528864578.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:18.663Z,1528864578.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:36:18.664Z,1528864578.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:19.063Z,1528864579.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:36:19.064Z,1528864579.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:19.464Z,1528864579.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:36:19.465Z,1528864579.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:19.849Z,1528864579.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:36:19.850Z,1528864579.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:20.256Z,1528864580.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:36:20.261Z,1528864580.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:20.659Z,1528864580.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:36:20.660Z,1528864580.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:21.064Z,1528864581.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:36:21.065Z,1528864581.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:21.462Z,1528864581.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:36:21.463Z,1528864581.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:21.857Z,1528864581.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:36:21.858Z,1528864581.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:22.269Z,1528864582.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:36:22.270Z,1528864582.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:22.667Z,1528864582.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:36:22.668Z,1528864582.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:23.073Z,1528864583.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:36:23.074Z,1528864583.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:23.478Z,1528864583.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:36:23.479Z,1528864583.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:23.844Z,1528864583.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:36:23.845Z,1528864583.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:24.244Z,1528864584.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:36:24.245Z,1528864584.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:24.676Z,1528864584.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:36:24.678Z,1528864584.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:25.046Z,1528864585.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:36:25.047Z,1528864585.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:25.470Z,1528864585.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:36:25.471Z,1528864585.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:25.847Z,1528864585.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:36:25.848Z,1528864585.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:26.239Z,1528864586.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:36:26.240Z,1528864586.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:26.654Z,1528864586.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:36:26.655Z,1528864586.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:27.048Z,1528864587.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:36:27.049Z,1528864587.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:27.452Z,1528864587.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:36:27.453Z,1528864587.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:27.847Z,1528864587.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:36:27.847Z,1528864587.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:28.248Z,1528864588.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:36:28.249Z,1528864588.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:28.652Z,1528864588.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:36:28.653Z,1528864588.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:29.053Z,1528864589.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:36:29.054Z,1528864589.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:29.459Z,1528864589.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:36:29.460Z,1528864589.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:29.843Z,1528864589.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:36:29.844Z,1528864589.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:30.243Z,1528864590.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:36:30.243Z,1528864590.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:30.652Z,1528864590.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:36:30.653Z,1528864590.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:31.053Z,1528864591.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:36:31.054Z,1528864591.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:31.456Z,1528864591.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:36:31.457Z,1528864591.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:31.844Z,1528864591.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:36:31.844Z,1528864591.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:32.249Z,1528864592.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:36:32.250Z,1528864592.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:32.656Z,1528864592.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:36:32.657Z,1528864592.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:33.056Z,1528864593.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:36:33.057Z,1528864593.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:33.456Z,1528864593.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:36:33.457Z,1528864593.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:33.848Z,1528864593.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:36:33.849Z,1528864593.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:34.247Z,1528864594.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:36:34.248Z,1528864594.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:34.652Z,1528864594.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:36:34.653Z,1528864594.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:35.054Z,1528864595.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:36:35.055Z,1528864595.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:35.452Z,1528864595.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:35.855Z,1528864595.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:36.247Z,1528864596.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:36.647Z,1528864596.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:39.763Z,1528864599.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:39.956Z,1528864599.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:40.344Z,1528864600.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:40.715Z,1528864600.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:41.115Z,1528864601.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:41.517Z,1528864601.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:41.939Z,1528864601.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:42.343Z,1528864602.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:42.727Z,1528864602.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:43.116Z,1528864603.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:43.516Z,1528864603.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:43.917Z,1528864603.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:44.315Z,1528864604.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:44.727Z,1528864604.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:45.127Z,1528864605.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:45.524Z,1528864605.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:45.918Z,1528864605.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:46.319Z,1528864606.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:46.723Z,1528864606.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:47.127Z,1528864607.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:47.527Z,1528864607.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:47.915Z,1528864607.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:48.318Z,1528864608.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:48.732Z,1528864608.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:49.127Z,1528864609.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:49.523Z,1528864609.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:49.922Z,1528864609.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:50.316Z,1528864610.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:50.724Z,1528864610.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:51.127Z,1528864611.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:51.523Z,1528864611.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:51.926Z,1528864611.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:52.327Z,1528864612.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:52.724Z,1528864612.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:53.127Z,1528864613.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:53.527Z,1528864613.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:53.927Z,1528864613.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:54.320Z,1528864614.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:54.728Z,1528864614.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:55.128Z,1528864615.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:55.525Z,1528864615.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:55.929Z,1528864615.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:56.319Z,1528864616.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:56.732Z,1528864616.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:57.129Z,1528864617.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:57.526Z,1528864617.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:57.920Z,1528864617.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:58.330Z,1528864618.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:58.729Z,1528864618.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:59.140Z,1528864619.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:59.534Z,1528864619.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:36:59.925Z,1528864619.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:00.326Z,1528864620.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:00.734Z,1528864620.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:01.133Z,1528864621.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:01.531Z,1528864621.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:01.928Z,1528864621.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:02.328Z,1528864622.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:02.730Z,1528864622.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:03.135Z,1528864623.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:03.527Z,1528864623.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:03.927Z,1528864623.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:04.327Z,1528864624.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:04.733Z,1528864624.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:05.133Z,1528864625.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:05.544Z,1528864625.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:05.930Z,1528864625.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:06.325Z,1528864626.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:06.739Z,1528864626.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:07.144Z,1528864627.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:07.532Z,1528864627.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:07.910Z,1528864627.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:08.333Z,1528864628.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:08.741Z,1528864628.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:09.143Z,1528864629.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:09.539Z,1528864629.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:09.917Z,1528864629.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:10.316Z,1528864630.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:10.738Z,1528864630.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:11.142Z,1528864631.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:11.544Z,1528864631.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:11.914Z,1528864631.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:12.320Z,1528864632.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:12.745Z,1528864632.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:13.144Z,1528864633.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:13.527Z,1528864633.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:13.918Z,1528864633.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:14.316Z,1528864634.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:14.724Z,1528864634.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:15.122Z,1528864635.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:15.524Z,1528864635.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:15.923Z,1528864635.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:16.317Z,1528864636.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:16.721Z,1528864636.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:17.127Z,1528864637.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:17.526Z,1528864637.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:17.918Z,1528864637.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:18.318Z,1528864638.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:18.722Z,1528864638.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:19.127Z,1528864639.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:19.548Z,1528864639.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:19.924Z,1528864639.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:20.318Z,1528864640.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:20.723Z,1528864640.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:21.126Z,1528864641.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:21.524Z,1528864641.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:21.916Z,1528864641.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:22.315Z,1528864642.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:22.723Z,1528864642.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:23.127Z,1528864643.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:23.550Z,1528864643.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:23.918Z,1528864643.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:24.319Z,1528864644.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:24.722Z,1528864644.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:25.127Z,1528864645.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:25.523Z,1528864645.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:25.918Z,1528864645.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:26.319Z,1528864646.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:26.718Z,1528864646.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:27.128Z,1528864647.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:27.527Z,1528864647.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:27.923Z,1528864647.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:28.319Z,1528864648.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:28.718Z,1528864648.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:29.120Z,1528864649.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:29.518Z,1528864649.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:29.923Z,1528864649.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:30.327Z,1528864650.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:30.749Z,1528864650.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:31.119Z,1528864651.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:31.519Z,1528864651.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:31.918Z,1528864651.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:32.319Z,1528864652.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:32.719Z,1528864652.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:33.147Z,1528864653.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:33.527Z,1528864653.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:33.947Z,1528864653.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:34.320Z,1528864654.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:34.718Z,1528864654.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:35.118Z,1528864655.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:35.518Z,1528864655.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:35.924Z,1528864655.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:36.330Z,1528864656.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:36.731Z,1528864656.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:37.120Z,1528864657.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:37.518Z,1528864657.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:37.924Z,1528864657.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:41.028Z,1528864661.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:41.204Z,1528864661.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:41.599Z,1528864661.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:42.004Z,1528864662.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:42.400Z,1528864662.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:42.780Z,1528864662.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:43.173Z,1528864663.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:43.575Z,1528864663.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:44.001Z,1528864664.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:44.400Z,1528864664.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:44.800Z,1528864664.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:45.176Z,1528864665.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:45.576Z,1528864665.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:46.001Z,1528864666.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:46.404Z,1528864666.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:46.797Z,1528864666.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:47.201Z,1528864667.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:47.598Z,1528864667.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:47.980Z,1528864667.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:48.375Z,1528864668.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:48.799Z,1528864668.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:49.200Z,1528864669.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:49.600Z,1528864669.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:49.977Z,1528864669.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:50.376Z,1528864670.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:50.801Z,1528864670.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:51.203Z,1528864671.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:51.601Z,1528864671.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:52.003Z,1528864672.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:52.380Z,1528864672.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:52.808Z,1528864672.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:53.211Z,1528864673.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:53.588Z,1528864673.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:53.978Z,1528864673.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:54.382Z,1528864674.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:54.787Z,1528864674.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:55.187Z,1528864675.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:55.584Z,1528864675.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:55.979Z,1528864675.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:56.378Z,1528864676.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:56.783Z,1528864676.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:57.187Z,1528864677.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:57.585Z,1528864677.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:57.977Z,1528864677.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:58.382Z,1528864678.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:58.783Z,1528864678.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:59.187Z,1528864679.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:59.587Z,1528864679.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:37:59.978Z,1528864679.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:00.378Z,1528864680.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:00.787Z,1528864680.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:01.187Z,1528864681.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:01.583Z,1528864681.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:01.981Z,1528864681.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:02.376Z,1528864682.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:02.783Z,1528864682.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:03.190Z,1528864683.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:03.583Z,1528864683.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:03.977Z,1528864683.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:04.381Z,1528864684.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:04.775Z,1528864684.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:05.184Z,1528864685.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:05.587Z,1528864685.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:05.984Z,1528864685.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:06.376Z,1528864686.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:06.779Z,1528864686.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:07.176Z,1528864687.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:07.577Z,1528864687.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:07.987Z,1528864687.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:08.387Z,1528864688.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:08.783Z,1528864688.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:09.178Z,1528864689.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:09.575Z,1528864689.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:09.980Z,1528864689.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:10.382Z,1528864690.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:10.778Z,1528864690.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:11.183Z,1528864691.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:11.587Z,1528864691.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:11.988Z,1528864691.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:12.378Z,1528864692.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:12.792Z,1528864692.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:13.184Z,1528864693.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:13.578Z,1528864693.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:13.988Z,1528864693.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:14.383Z,1528864694.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:14.787Z,1528864694.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:15.179Z,1528864695.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:15.579Z,1528864695.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:15.980Z,1528864695.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:16.383Z,1528864696.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:16.781Z,1528864696.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:17.184Z,1528864697.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:17.587Z,1528864697.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:17.984Z,1528864697.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:18.377Z,1528864698.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:18.780Z,1528864698.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:19.175Z,1528864699.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:19.579Z,1528864699.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:19.988Z,1528864699.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:20.387Z,1528864700.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:20.783Z,1528864700.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:21.181Z,1528864701.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:21.577Z,1528864701.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:21.978Z,1528864701.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:22.382Z,1528864702.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:22.777Z,1528864702.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:23.191Z,1528864703.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:23.587Z,1528864703.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:23.984Z,1528864703.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:24.378Z,1528864704.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:24.779Z,1528864704.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:25.179Z,1528864705.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:25.578Z,1528864705.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:25.987Z,1528864705.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:26.388Z,1528864706.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:26.783Z,1528864706.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:27.180Z,1528864707.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:27.578Z,1528864707.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:27.978Z,1528864707.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:28.380Z,1528864708.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:28.775Z,1528864708.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:29.187Z,1528864709.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:29.587Z,1528864709.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:29.987Z,1528864709.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:30.381Z,1528864710.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:30.780Z,1528864710.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:31.187Z,1528864711.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:31.581Z,1528864711.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:31.989Z,1528864711.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:32.392Z,1528864712.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:32.788Z,1528864712.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:33.186Z,1528864713.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:33.576Z,1528864713.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:33.980Z,1528864713.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:34.380Z,1528864714.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:34.778Z,1528864714.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:35.188Z,1528864715.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:35.593Z,1528864715.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:35.989Z,1528864715.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:36.382Z,1528864716.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:36.784Z,1528864716.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:39.888Z,1528864719.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:40.048Z,1528864720.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:40.440Z,1528864720.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:40.836Z,1528864720.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:41.248Z,1528864721.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:41.634Z,1528864721.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:42.036Z,1528864722.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:42.435Z,1528864722.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:42.832Z,1528864722.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:43.233Z,1528864723.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:43.644Z,1528864723.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:44.050Z,1528864724.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:44.430Z,1528864724.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:44.830Z,1528864724.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:45.231Z,1528864725.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:45.630Z,1528864725.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:46.034Z,1528864726.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:46.437Z,1528864726.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:46.837Z,1528864726.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:47.233Z,1528864727.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:47.635Z,1528864727.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:48.028Z,1528864728.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:48.429Z,1528864728.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:48.830Z,1528864728.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:49.242Z,1528864729.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:49.639Z,1528864729.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:50.040Z,1528864730.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:50.440Z,1528864730.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:50.821Z,1528864730.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:51.230Z,1528864731.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:51.620Z,1528864731.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:52.047Z,1528864732.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:52.431Z,1528864732.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:52.832Z,1528864732.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:53.221Z,1528864733.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:53.624Z,1528864733.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:54.021Z,1528864734.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:54.424Z,1528864734.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:54.828Z,1528864734.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:55.227Z,1528864735.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:55.632Z,1528864735.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:56.031Z,1528864736.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:56.422Z,1528864736.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:56.822Z,1528864736.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:57.226Z,1528864737.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:57.622Z,1528864737.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:58.027Z,1528864738.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:58.431Z,1528864738.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:58.855Z,1528864738.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:59.222Z,1528864739.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:38:59.624Z,1528864739.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:00.021Z,1528864740.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:00.426Z,1528864740.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:00.823Z,1528864740.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:01.228Z,1528864741.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:01.631Z,1528864741.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:02.032Z,1528864742.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:02.421Z,1528864742.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:02.822Z,1528864742.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:03.225Z,1528864743.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:03.620Z,1528864743.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:04.027Z,1528864744.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:04.431Z,1528864744.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:04.828Z,1528864744.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:05.222Z,1528864745.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:05.622Z,1528864745.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:06.022Z,1528864746.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:06.422Z,1528864746.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:06.823Z,1528864746.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:07.228Z,1528864747.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:07.631Z,1528864747.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:08.031Z,1528864748.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:08.422Z,1528864748.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:08.828Z,1528864748.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:09.226Z,1528864749.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:09.620Z,1528864749.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:10.027Z,1528864750.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:10.431Z,1528864750.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:10.824Z,1528864750.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:11.224Z,1528864751.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:11.624Z,1528864751.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:12.030Z,1528864752.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:12.427Z,1528864752.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:12.828Z,1528864752.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:13.244Z,1528864753.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:13.639Z,1528864753.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:14.036Z,1528864754.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:14.430Z,1528864754.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:14.832Z,1528864754.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:15.232Z,1528864755.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:15.630Z,1528864755.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:16.034Z,1528864756.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:16.438Z,1528864756.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:16.438Z,1528864756.438 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2018-06-13T04:39:16.438Z,1528864756.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:39:16.440Z,1528864756.440 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:16.440Z,1528864756.440 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25
2018-06-13T04:39:16.440Z,1528864756.440 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:39:16.442Z,1528864756.442 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:16.442Z,1528864756.442 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2018-06-13T04:39:16.442Z,1528864756.442 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:39:16.517Z,1528864756.517 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:39:16.517Z,1528864756.517 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:39:16.518Z,1528864756.518 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:39:16.921Z,1528864756.921 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:39:16.921Z,1528864756.921 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2018-06-13T04:39:16.922Z,1528864756.922 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:39:16.922Z,1528864756.922 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25
2018-06-13T04:39:16.922Z,1528864756.922 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:39:16.922Z,1528864756.922 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2018-06-13T04:39:17.228Z,1528864757.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:39:17.229Z,1528864757.229 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:39:17.229Z,1528864757.229 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:39:17.230Z,1528864757.230 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:39:17.230Z,1528864757.230 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:39:17.230Z,1528864757.230 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:39:17.231Z,1528864757.231 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:39:17.231Z,1528864757.231 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:39:17.231Z,1528864757.231 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:39:17.635Z,1528864757.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:39:17.636Z,1528864757.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:18.012Z,1528864758.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:39:18.013Z,1528864758.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:18.417Z,1528864758.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:39:18.418Z,1528864758.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:18.820Z,1528864758.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:39:18.821Z,1528864758.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:19.243Z,1528864759.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:39:19.244Z,1528864759.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:19.644Z,1528864759.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:39:19.645Z,1528864759.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:20.044Z,1528864760.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:39:20.045Z,1528864760.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:20.416Z,1528864760.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:39:20.416Z,1528864760.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:20.819Z,1528864760.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:39:20.820Z,1528864760.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:21.218Z,1528864761.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:39:21.219Z,1528864761.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:21.616Z,1528864761.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:39:21.617Z,1528864761.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:22.044Z,1528864762.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:39:22.045Z,1528864762.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:22.444Z,1528864762.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:39:22.445Z,1528864762.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:22.843Z,1528864762.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:39:22.844Z,1528864762.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:23.219Z,1528864763.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:39:23.220Z,1528864763.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:23.619Z,1528864763.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:39:23.620Z,1528864763.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:24.015Z,1528864764.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:39:24.016Z,1528864764.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:24.420Z,1528864764.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:39:24.420Z,1528864764.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:24.814Z,1528864764.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:39:24.815Z,1528864764.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:25.246Z,1528864765.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:39:25.247Z,1528864765.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:25.652Z,1528864765.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:39:25.657Z,1528864765.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:26.030Z,1528864766.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:39:26.031Z,1528864766.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:26.422Z,1528864766.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:39:26.423Z,1528864766.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:26.828Z,1528864766.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:39:26.829Z,1528864766.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:27.219Z,1528864767.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:39:27.220Z,1528864767.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:27.618Z,1528864767.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:39:27.619Z,1528864767.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:28.027Z,1528864768.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:39:28.028Z,1528864768.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:28.430Z,1528864768.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:39:28.431Z,1528864768.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:28.827Z,1528864768.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:39:28.828Z,1528864768.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:29.221Z,1528864769.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:39:29.222Z,1528864769.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:29.618Z,1528864769.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:39:29.619Z,1528864769.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:30.021Z,1528864770.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:39:30.022Z,1528864770.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:30.422Z,1528864770.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:39:30.423Z,1528864770.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:30.821Z,1528864770.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:39:30.822Z,1528864770.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:31.229Z,1528864771.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:39:31.230Z,1528864771.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:31.631Z,1528864771.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:39:31.632Z,1528864771.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:32.026Z,1528864772.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:39:32.027Z,1528864772.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:32.421Z,1528864772.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:39:32.422Z,1528864772.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:32.828Z,1528864772.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:39:32.829Z,1528864772.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:33.222Z,1528864773.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:39:33.223Z,1528864773.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:33.621Z,1528864773.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:39:33.622Z,1528864773.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:34.027Z,1528864774.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:39:34.028Z,1528864774.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:34.430Z,1528864774.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:39:34.431Z,1528864774.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:34.827Z,1528864774.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:39:34.828Z,1528864774.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:35.222Z,1528864775.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:39:35.223Z,1528864775.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:35.636Z,1528864775.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:39:35.637Z,1528864775.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:36.032Z,1528864776.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:39:36.033Z,1528864776.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:36.432Z,1528864776.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T04:39:36.433Z,1528864776.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:36.829Z,1528864776.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:39.948Z,1528864779.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:40.124Z,1528864780.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:40.536Z,1528864780.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:40.896Z,1528864780.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:41.300Z,1528864781.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:41.696Z,1528864781.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:42.103Z,1528864782.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:42.503Z,1528864782.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:42.904Z,1528864782.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:43.292Z,1528864783.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:43.695Z,1528864783.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:44.094Z,1528864784.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:44.494Z,1528864784.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:44.894Z,1528864784.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:45.327Z,1528864785.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:45.703Z,1528864785.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:46.099Z,1528864786.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:46.495Z,1528864786.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:46.900Z,1528864786.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:47.294Z,1528864787.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:47.694Z,1528864787.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:48.100Z,1528864788.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:48.503Z,1528864788.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:48.908Z,1528864788.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:49.300Z,1528864789.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:49.693Z,1528864789.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:50.095Z,1528864790.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:50.494Z,1528864790.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:50.894Z,1528864790.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:51.303Z,1528864791.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:51.703Z,1528864791.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:52.099Z,1528864792.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:52.497Z,1528864792.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:52.895Z,1528864792.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:53.295Z,1528864793.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:53.697Z,1528864793.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:54.104Z,1528864794.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:54.503Z,1528864794.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:54.907Z,1528864794.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:55.300Z,1528864795.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:55.694Z,1528864795.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:56.098Z,1528864796.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:56.495Z,1528864796.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:56.896Z,1528864796.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:57.303Z,1528864797.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:57.707Z,1528864797.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:58.104Z,1528864798.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:58.507Z,1528864798.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:58.899Z,1528864798.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:59.306Z,1528864799.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:39:59.721Z,1528864799.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:00.106Z,1528864800.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:00.515Z,1528864800.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:00.912Z,1528864800.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:01.303Z,1528864801.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:01.704Z,1528864801.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:02.105Z,1528864802.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:02.509Z,1528864802.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:02.906Z,1528864802.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:03.311Z,1528864803.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:03.707Z,1528864803.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:04.107Z,1528864804.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:04.502Z,1528864804.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:04.888Z,1528864804.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:05.289Z,1528864805.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:05.688Z,1528864805.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:06.115Z,1528864806.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:06.516Z,1528864806.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:06.903Z,1528864806.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:07.294Z,1528864807.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:07.693Z,1528864807.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:08.095Z,1528864808.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:08.495Z,1528864808.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:08.893Z,1528864808.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:09.307Z,1528864809.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:09.703Z,1528864809.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:10.104Z,1528864810.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:10.496Z,1528864810.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:10.892Z,1528864810.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:11.296Z,1528864811.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:11.709Z,1528864811.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:12.104Z,1528864812.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:12.508Z,1528864812.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:12.908Z,1528864812.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:13.293Z,1528864813.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:13.694Z,1528864813.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:14.096Z,1528864814.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:14.493Z,1528864814.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:14.900Z,1528864814.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:15.309Z,1528864815.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:15.703Z,1528864815.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:16.104Z,1528864816.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:16.495Z,1528864816.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:16.892Z,1528864816.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:17.295Z,1528864817.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:17.698Z,1528864817.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:18.051Z,1528864818.051 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T04:40:18.051Z,1528864818.051 [NAL9602] Data Fault, FailCount= 2
2018-06-13T04:40:18.051Z,1528864818.051 [NAL9602](ERROR): Data Fault
2018-06-13T04:40:18.104Z,1528864818.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:18.181Z,1528864818.181 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T04:40:18.454Z,1528864818.454 [NAL9602](INFO): Powering down
2018-06-13T04:40:18.499Z,1528864818.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:18.897Z,1528864818.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:19.290Z,1528864819.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:19.370Z,1528864819.370 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T04:40:19.370Z,1528864819.370 [NAL9602] No Fault, FailCount= 2
2018-06-13T04:40:19.694Z,1528864819.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:20.094Z,1528864820.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:20.490Z,1528864820.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:20.898Z,1528864820.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:21.293Z,1528864821.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:21.694Z,1528864821.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:22.095Z,1528864822.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:22.494Z,1528864822.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:22.893Z,1528864822.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:23.294Z,1528864823.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:23.700Z,1528864823.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:24.091Z,1528864824.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:24.494Z,1528864824.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:24.898Z,1528864824.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:25.291Z,1528864825.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:25.704Z,1528864825.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:26.106Z,1528864826.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:26.495Z,1528864826.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:26.896Z,1528864826.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:27.294Z,1528864827.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:27.695Z,1528864827.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:28.096Z,1528864828.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:28.500Z,1528864828.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:28.890Z,1528864828.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:29.295Z,1528864829.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:29.694Z,1528864829.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:30.090Z,1528864830.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:30.495Z,1528864830.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:30.900Z,1528864830.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:31.291Z,1528864831.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:31.694Z,1528864831.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:32.093Z,1528864832.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:32.495Z,1528864832.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:32.895Z,1528864832.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:33.296Z,1528864833.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:33.694Z,1528864833.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:34.095Z,1528864834.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:34.494Z,1528864834.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:34.892Z,1528864834.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:35.294Z,1528864835.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:35.703Z,1528864835.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:36.092Z,1528864836.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:36.499Z,1528864836.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:36.502Z,1528864836.502 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T04:40:36.502Z,1528864836.502 [Default:CheckIn:C.Wait] Stopped
2018-06-13T04:40:36.502Z,1528864836.502 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T04:40:36.502Z,1528864836.502 [Default:CheckIn:D] Running Loop=1
2018-06-13T04:40:36.900Z,1528864836.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:36.903Z,1528864836.903 [Default:CheckIn:D] Stopped
2018-06-13T04:40:36.903Z,1528864836.903 [Default:CheckIn:E] Running Loop=1
2018-06-13T04:40:37.295Z,1528864837.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:37.298Z,1528864837.298 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 73.390959 min 
2018-06-13T04:40:37.298Z,1528864837.298 [Default:CheckIn:E] Stopped
2018-06-13T04:40:37.298Z,1528864837.298 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T04:40:37.298Z,1528864837.298 [Default:CheckIn] Stopped
2018-06-13T04:40:37.299Z,1528864837.299 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T04:40:37.299Z,1528864837.299 [Default:CheckIn](INFO): Running loop #8
2018-06-13T04:40:37.299Z,1528864837.299 [Default:CheckIn] Running Loop=8
2018-06-13T04:40:37.299Z,1528864837.299 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T04:40:37.299Z,1528864837.299 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T04:40:37.696Z,1528864837.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:38.099Z,1528864838.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:41.208Z,1528864841.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:41.346Z,1528864841.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:41.745Z,1528864841.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:42.146Z,1528864842.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:42.553Z,1528864842.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:42.949Z,1528864842.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:43.338Z,1528864843.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:43.728Z,1528864843.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:44.154Z,1528864844.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:44.528Z,1528864844.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:44.932Z,1528864844.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:45.333Z,1528864845.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:45.727Z,1528864845.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:46.127Z,1528864846.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:46.536Z,1528864846.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:46.928Z,1528864846.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:47.331Z,1528864847.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:47.732Z,1528864847.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:48.129Z,1528864848.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:48.494Z,1528864848.494 [NAL9602](INFO): Powering up NAL9602
2018-06-13T04:40:48.532Z,1528864848.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:48.932Z,1528864848.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:49.330Z,1528864849.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:49.746Z,1528864849.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:50.136Z,1528864850.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:50.536Z,1528864850.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:50.931Z,1528864850.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:51.331Z,1528864851.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:51.730Z,1528864851.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:52.137Z,1528864852.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:52.535Z,1528864852.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:52.934Z,1528864852.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:53.334Z,1528864853.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:53.735Z,1528864853.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:54.132Z,1528864854.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:54.534Z,1528864854.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:54.944Z,1528864854.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:55.333Z,1528864855.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:55.734Z,1528864855.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:56.135Z,1528864856.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:56.535Z,1528864856.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:56.935Z,1528864856.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:57.335Z,1528864857.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:57.735Z,1528864857.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:58.135Z,1528864858.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:58.535Z,1528864858.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:58.939Z,1528864858.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:59.301Z,1528864859.301 [NAL9602](INFO): NAL9602 initialized
2018-06-13T04:40:59.336Z,1528864859.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:40:59.747Z,1528864859.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:00.143Z,1528864860.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:00.547Z,1528864860.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:00.943Z,1528864860.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:01.336Z,1528864861.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:01.739Z,1528864861.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:02.138Z,1528864862.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:02.543Z,1528864862.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:02.947Z,1528864862.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:03.343Z,1528864863.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:03.736Z,1528864863.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:04.144Z,1528864864.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:04.540Z,1528864864.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:04.936Z,1528864864.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:05.343Z,1528864865.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:05.747Z,1528864865.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:06.148Z,1528864866.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:06.539Z,1528864866.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:06.940Z,1528864866.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:07.336Z,1528864867.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:07.740Z,1528864867.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:08.139Z,1528864868.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:08.544Z,1528864868.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:08.947Z,1528864868.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:09.352Z,1528864869.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:09.740Z,1528864869.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:10.139Z,1528864870.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:10.544Z,1528864870.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:10.935Z,1528864870.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:11.345Z,1528864871.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:11.747Z,1528864871.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:12.145Z,1528864872.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:12.539Z,1528864872.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:12.940Z,1528864872.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:13.336Z,1528864873.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:13.739Z,1528864873.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:14.148Z,1528864874.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:14.545Z,1528864874.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:14.947Z,1528864874.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:15.348Z,1528864875.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:15.735Z,1528864875.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:16.144Z,1528864876.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:16.549Z,1528864876.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:16.952Z,1528864876.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:17.345Z,1528864877.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:17.752Z,1528864877.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:18.151Z,1528864878.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:18.551Z,1528864878.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:18.948Z,1528864878.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:19.345Z,1528864879.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:19.747Z,1528864879.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:20.151Z,1528864880.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:20.550Z,1528864880.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:20.959Z,1528864880.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:21.353Z,1528864881.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:21.741Z,1528864881.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:22.150Z,1528864882.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:22.553Z,1528864882.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:22.954Z,1528864882.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:23.359Z,1528864883.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:23.760Z,1528864883.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:24.160Z,1528864884.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:24.560Z,1528864884.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:24.928Z,1528864884.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:25.345Z,1528864885.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:25.734Z,1528864885.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:26.136Z,1528864886.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:26.563Z,1528864886.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:26.958Z,1528864886.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:27.362Z,1528864887.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:27.737Z,1528864887.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:28.140Z,1528864888.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:28.540Z,1528864888.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:28.931Z,1528864888.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:29.363Z,1528864889.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:29.747Z,1528864889.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:30.146Z,1528864890.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:30.544Z,1528864890.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:30.935Z,1528864890.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:31.334Z,1528864891.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:31.743Z,1528864891.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:32.140Z,1528864892.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:32.543Z,1528864892.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:32.947Z,1528864892.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:33.342Z,1528864893.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:33.735Z,1528864893.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:34.138Z,1528864894.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:34.538Z,1528864894.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:34.938Z,1528864894.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:35.347Z,1528864895.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:35.746Z,1528864895.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:36.143Z,1528864896.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:36.539Z,1528864896.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:36.939Z,1528864896.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:40.048Z,1528864900.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:40.200Z,1528864900.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:40.600Z,1528864900.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:41.003Z,1528864901.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:41.403Z,1528864901.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:41.792Z,1528864901.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:42.194Z,1528864902.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:42.607Z,1528864902.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:43.002Z,1528864903.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:43.411Z,1528864903.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:43.808Z,1528864903.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:44.206Z,1528864904.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:44.603Z,1528864904.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:45.002Z,1528864905.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:45.404Z,1528864905.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:45.803Z,1528864905.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:46.201Z,1528864906.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:46.603Z,1528864906.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:47.016Z,1528864907.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:47.408Z,1528864907.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:47.808Z,1528864907.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:48.202Z,1528864908.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:48.589Z,1528864908.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:48.984Z,1528864908.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:49.412Z,1528864909.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:49.816Z,1528864909.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:50.214Z,1528864910.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:50.616Z,1528864910.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:50.993Z,1528864910.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:51.391Z,1528864911.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:51.792Z,1528864911.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:52.193Z,1528864912.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:52.618Z,1528864912.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:53.016Z,1528864913.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:53.418Z,1528864913.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:53.791Z,1528864913.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:54.192Z,1528864914.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:54.597Z,1528864914.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:54.988Z,1528864914.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:55.419Z,1528864915.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:55.819Z,1528864915.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:56.204Z,1528864916.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:56.601Z,1528864916.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:56.994Z,1528864916.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:57.396Z,1528864917.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:57.795Z,1528864917.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:58.193Z,1528864918.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:58.600Z,1528864918.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:59.005Z,1528864919.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:59.399Z,1528864919.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:41:59.796Z,1528864919.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:00.195Z,1528864920.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:00.593Z,1528864920.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:00.995Z,1528864920.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:01.404Z,1528864921.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:01.805Z,1528864921.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:02.200Z,1528864922.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:02.595Z,1528864922.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:02.994Z,1528864922.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:03.395Z,1528864923.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:03.793Z,1528864923.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:04.196Z,1528864924.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:04.604Z,1528864924.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:04.000Z,1528864925.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:05.400Z,1528864925.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:05.794Z,1528864925.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:06.195Z,1528864926.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:06.606Z,1528864926.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:06.999Z,1528864926.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:07.406Z,1528864927.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:07.820Z,1528864927.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:08.206Z,1528864928.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:08.596Z,1528864928.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:08.996Z,1528864928.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:09.396Z,1528864929.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:09.794Z,1528864929.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:10.194Z,1528864930.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:10.602Z,1528864930.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:11.006Z,1528864931.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:11.416Z,1528864931.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:11.794Z,1528864931.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:12.193Z,1528864932.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:12.593Z,1528864932.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:12.994Z,1528864932.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:13.407Z,1528864933.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:13.805Z,1528864933.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:14.206Z,1528864934.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:14.593Z,1528864934.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:14.996Z,1528864934.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:15.399Z,1528864935.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:15.796Z,1528864935.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:16.197Z,1528864936.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:16.612Z,1528864936.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:17.006Z,1528864937.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:17.406Z,1528864937.406 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:17.406Z,1528864937.406 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2018-06-13T04:42:17.406Z,1528864937.406 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:42:17.408Z,1528864937.408 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:17.408Z,1528864937.408 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26
2018-06-13T04:42:17.408Z,1528864937.408 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:42:17.410Z,1528864937.410 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:17.410Z,1528864937.410 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2018-06-13T04:42:17.410Z,1528864937.410 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:42:17.501Z,1528864937.501 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:42:17.501Z,1528864937.501 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:42:17.502Z,1528864937.502 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:42:17.869Z,1528864937.869 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:42:17.869Z,1528864937.869 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2018-06-13T04:42:17.870Z,1528864937.870 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:42:17.870Z,1528864937.870 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26
2018-06-13T04:42:17.870Z,1528864937.870 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:42:17.870Z,1528864937.870 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2018-06-13T04:42:18.193Z,1528864938.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:42:18.194Z,1528864938.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:42:18.194Z,1528864938.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:42:18.194Z,1528864938.194 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:42:18.195Z,1528864938.195 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:42:18.195Z,1528864938.195 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:42:18.195Z,1528864938.195 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:42:18.196Z,1528864938.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:42:18.196Z,1528864938.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:42:18.592Z,1528864938.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:42:18.593Z,1528864938.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:19.004Z,1528864939.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:42:19.005Z,1528864939.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:19.405Z,1528864939.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:42:19.406Z,1528864939.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:19.808Z,1528864939.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:42:19.809Z,1528864939.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:20.212Z,1528864940.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:42:20.213Z,1528864940.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:20.597Z,1528864940.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:42:20.598Z,1528864940.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:21.000Z,1528864941.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:42:21.001Z,1528864941.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:21.395Z,1528864941.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:42:21.396Z,1528864941.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:21.793Z,1528864941.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:42:21.794Z,1528864941.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:22.195Z,1528864942.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:42:22.196Z,1528864942.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:22.604Z,1528864942.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:42:22.605Z,1528864942.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:23.006Z,1528864943.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:42:23.007Z,1528864943.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:23.408Z,1528864943.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:42:23.410Z,1528864943.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:23.798Z,1528864943.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:42:23.799Z,1528864943.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:24.193Z,1528864944.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:42:24.194Z,1528864944.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:24.596Z,1528864944.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:42:24.598Z,1528864944.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:24.996Z,1528864944.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:42:24.996Z,1528864944.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:25.405Z,1528864945.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:42:25.406Z,1528864945.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:25.809Z,1528864945.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:42:25.810Z,1528864945.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:26.205Z,1528864946.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:42:26.206Z,1528864946.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:26.592Z,1528864946.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:42:26.594Z,1528864946.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:26.999Z,1528864946.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:42:26.000Z,1528864947.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:27.400Z,1528864947.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:42:27.402Z,1528864947.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:27.803Z,1528864947.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:42:27.803Z,1528864947.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:28.200Z,1528864948.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:42:28.202Z,1528864948.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:28.609Z,1528864948.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:42:28.610Z,1528864948.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:29.009Z,1528864949.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:42:29.010Z,1528864949.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:29.409Z,1528864949.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:42:29.410Z,1528864949.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:29.798Z,1528864949.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:42:29.799Z,1528864949.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:30.200Z,1528864950.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:42:30.202Z,1528864950.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:30.600Z,1528864950.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:42:30.601Z,1528864950.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:30.998Z,1528864950.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:42:30.999Z,1528864950.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:31.407Z,1528864951.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:42:31.408Z,1528864951.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:31.820Z,1528864951.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:42:31.821Z,1528864951.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:32.209Z,1528864952.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:42:32.210Z,1528864952.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:32.600Z,1528864952.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:42:32.601Z,1528864952.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:32.996Z,1528864952.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:42:32.998Z,1528864952.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:33.408Z,1528864953.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:42:33.413Z,1528864953.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:33.809Z,1528864953.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:42:33.810Z,1528864953.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:34.208Z,1528864954.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:42:34.209Z,1528864954.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:34.610Z,1528864954.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:42:34.611Z,1528864954.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:35.010Z,1528864955.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:42:35.011Z,1528864955.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:35.409Z,1528864955.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:42:35.410Z,1528864955.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:35.807Z,1528864955.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:42:35.808Z,1528864955.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:36.192Z,1528864956.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:42:36.198Z,1528864956.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:36.605Z,1528864956.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:42:36.606Z,1528864956.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:37.005Z,1528864957.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:42:37.006Z,1528864957.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:40.112Z,1528864960.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:40.263Z,1528864960.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:40.658Z,1528864960.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:41.054Z,1528864961.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:41.454Z,1528864961.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:41.854Z,1528864961.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:42.249Z,1528864962.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:42.664Z,1528864962.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:43.062Z,1528864963.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:43.460Z,1528864963.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:43.860Z,1528864963.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:44.261Z,1528864964.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:44.640Z,1528864964.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:45.040Z,1528864965.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:45.467Z,1528864965.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:45.864Z,1528864965.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:46.263Z,1528864966.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:46.650Z,1528864966.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:47.038Z,1528864967.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:47.439Z,1528864967.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:47.841Z,1528864967.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:48.241Z,1528864968.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:48.669Z,1528864968.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:49.066Z,1528864969.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:49.471Z,1528864969.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:49.852Z,1528864969.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:50.246Z,1528864970.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:50.641Z,1528864970.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:51.049Z,1528864971.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:51.472Z,1528864971.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:51.855Z,1528864971.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:52.256Z,1528864972.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:52.646Z,1528864972.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:53.044Z,1528864973.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:53.446Z,1528864973.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:53.847Z,1528864973.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:54.243Z,1528864974.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:54.651Z,1528864974.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:55.055Z,1528864975.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:55.453Z,1528864975.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:55.844Z,1528864975.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:56.248Z,1528864976.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:56.641Z,1528864976.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:57.052Z,1528864977.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:57.456Z,1528864977.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:57.853Z,1528864977.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:58.255Z,1528864978.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:58.647Z,1528864978.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:59.043Z,1528864979.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:59.447Z,1528864979.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:42:59.849Z,1528864979.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:00.253Z,1528864980.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:00.660Z,1528864980.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:01.060Z,1528864981.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:01.456Z,1528864981.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:01.848Z,1528864981.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:02.255Z,1528864982.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:02.644Z,1528864982.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:03.045Z,1528864983.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:03.453Z,1528864983.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:03.857Z,1528864983.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:04.260Z,1528864984.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:04.646Z,1528864984.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:05.044Z,1528864985.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:05.439Z,1528864985.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:05.852Z,1528864985.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:06.251Z,1528864986.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:06.658Z,1528864986.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:07.064Z,1528864987.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:07.461Z,1528864987.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:07.847Z,1528864987.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:08.247Z,1528864988.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:08.652Z,1528864988.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:09.047Z,1528864989.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:09.457Z,1528864989.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:09.858Z,1528864989.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:10.264Z,1528864990.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:10.649Z,1528864990.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:11.057Z,1528864991.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:11.456Z,1528864991.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:11.856Z,1528864991.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:12.260Z,1528864992.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:12.661Z,1528864992.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:13.068Z,1528864993.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:13.458Z,1528864993.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:13.856Z,1528864993.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:14.260Z,1528864994.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:14.651Z,1528864994.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:15.051Z,1528864995.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:15.463Z,1528864995.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:15.862Z,1528864995.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:16.268Z,1528864996.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:16.661Z,1528864996.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:17.048Z,1528864997.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:17.449Z,1528864997.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:17.856Z,1528864997.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:18.265Z,1528864998.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:18.664Z,1528864998.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:19.072Z,1528864999.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:19.474Z,1528864999.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:19.864Z,1528864999.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:20.271Z,1528865000.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:20.640Z,1528865000.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:21.045Z,1528865001.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:21.470Z,1528865001.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:21.861Z,1528865001.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:22.269Z,1528865002.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:22.645Z,1528865002.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:23.066Z,1528865003.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:23.475Z,1528865003.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:23.850Z,1528865003.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:24.244Z,1528865004.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:24.652Z,1528865004.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:25.074Z,1528865005.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:25.449Z,1528865005.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:25.850Z,1528865005.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:26.268Z,1528865006.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:26.671Z,1528865006.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:27.042Z,1528865007.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:27.448Z,1528865007.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:27.872Z,1528865007.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:28.279Z,1528865008.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:28.648Z,1528865008.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:29.043Z,1528865009.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:29.469Z,1528865009.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:29.845Z,1528865009.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:30.246Z,1528865010.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:30.673Z,1528865010.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:31.076Z,1528865011.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:31.475Z,1528865011.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:31.847Z,1528865011.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:32.264Z,1528865012.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:32.667Z,1528865012.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:33.049Z,1528865013.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:33.472Z,1528865013.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:33.849Z,1528865013.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:34.276Z,1528865014.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:34.672Z,1528865014.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:35.044Z,1528865015.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:35.448Z,1528865015.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:35.871Z,1528865015.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:36.244Z,1528865016.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:36.674Z,1528865016.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:37.075Z,1528865017.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:40.170Z,1528865020.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:40.323Z,1528865020.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:40.726Z,1528865020.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:41.123Z,1528865021.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:41.532Z,1528865021.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:41.922Z,1528865021.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:42.326Z,1528865022.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:42.720Z,1528865022.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:43.104Z,1528865023.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:43.517Z,1528865023.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:43.905Z,1528865023.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:44.303Z,1528865024.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:44.727Z,1528865024.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:45.127Z,1528865025.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:45.528Z,1528865025.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:45.904Z,1528865025.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:46.303Z,1528865026.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:46.705Z,1528865026.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:47.121Z,1528865027.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:47.539Z,1528865027.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:47.936Z,1528865027.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:48.332Z,1528865028.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:48.710Z,1528865028.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:49.108Z,1528865029.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:49.507Z,1528865029.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:49.912Z,1528865029.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:50.312Z,1528865030.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:50.730Z,1528865030.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:51.132Z,1528865031.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:51.533Z,1528865031.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:51.911Z,1528865031.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:52.308Z,1528865032.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:52.709Z,1528865032.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:53.108Z,1528865033.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:53.535Z,1528865033.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:53.936Z,1528865033.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:54.344Z,1528865034.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:54.708Z,1528865034.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:55.111Z,1528865035.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:55.512Z,1528865035.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:55.910Z,1528865035.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:56.307Z,1528865036.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:56.737Z,1528865036.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:57.134Z,1528865037.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:57.539Z,1528865037.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:57.913Z,1528865037.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:58.310Z,1528865038.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:58.712Z,1528865038.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:59.111Z,1528865039.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:59.535Z,1528865039.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:43:59.945Z,1528865039.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:00.320Z,1528865040.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:00.714Z,1528865040.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:01.109Z,1528865041.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:01.514Z,1528865041.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:01.914Z,1528865041.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:02.314Z,1528865042.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:02.723Z,1528865042.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:03.122Z,1528865043.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:03.519Z,1528865043.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:03.916Z,1528865043.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:04.316Z,1528865044.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:04.718Z,1528865044.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:05.114Z,1528865045.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:05.518Z,1528865045.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:05.923Z,1528865045.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:06.321Z,1528865046.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:06.715Z,1528865046.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:07.135Z,1528865047.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:07.514Z,1528865047.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:07.937Z,1528865047.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:08.338Z,1528865048.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:08.722Z,1528865048.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:09.119Z,1528865049.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:09.522Z,1528865049.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:09.915Z,1528865049.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:10.317Z,1528865050.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:10.719Z,1528865050.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:11.140Z,1528865051.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:11.540Z,1528865051.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:11.946Z,1528865051.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:12.320Z,1528865052.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:12.740Z,1528865052.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:13.116Z,1528865053.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:13.512Z,1528865053.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:13.919Z,1528865053.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:14.328Z,1528865054.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:14.732Z,1528865054.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:15.128Z,1528865055.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:15.524Z,1528865055.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:15.926Z,1528865055.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:16.319Z,1528865056.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:16.714Z,1528865056.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:17.112Z,1528865057.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:17.550Z,1528865057.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:17.924Z,1528865057.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:18.323Z,1528865058.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:18.716Z,1528865058.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:19.132Z,1528865059.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:19.515Z,1528865059.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:19.918Z,1528865059.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:20.323Z,1528865060.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:20.747Z,1528865060.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:21.148Z,1528865061.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:21.538Z,1528865061.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:21.931Z,1528865061.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:22.332Z,1528865062.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:22.721Z,1528865062.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:23.122Z,1528865063.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:23.533Z,1528865063.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:23.940Z,1528865063.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:24.341Z,1528865064.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:24.715Z,1528865064.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:25.113Z,1528865065.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:25.540Z,1528865065.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:25.941Z,1528865065.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:26.343Z,1528865066.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:26.715Z,1528865066.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:27.144Z,1528865067.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:27.525Z,1528865067.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:27.927Z,1528865067.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:28.322Z,1528865068.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:28.749Z,1528865068.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:29.111Z,1528865069.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:29.524Z,1528865069.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:29.923Z,1528865069.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:30.347Z,1528865070.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:30.711Z,1528865070.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:31.110Z,1528865071.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:31.521Z,1528865071.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:31.919Z,1528865071.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:32.320Z,1528865072.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:32.708Z,1528865072.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:33.117Z,1528865073.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:33.520Z,1528865073.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:33.917Z,1528865073.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:34.315Z,1528865074.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:34.718Z,1528865074.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:35.108Z,1528865075.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:35.520Z,1528865075.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:35.919Z,1528865075.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:36.322Z,1528865076.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:36.716Z,1528865076.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:37.113Z,1528865077.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:40.250Z,1528865080.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:40.402Z,1528865080.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:40.801Z,1528865080.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:41.192Z,1528865081.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:41.600Z,1528865081.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:42.006Z,1528865082.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:42.385Z,1528865082.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:42.808Z,1528865082.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:43.206Z,1528865083.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:43.606Z,1528865083.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:43.982Z,1528865083.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:44.384Z,1528865084.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:44.784Z,1528865084.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:45.208Z,1528865085.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:45.613Z,1528865085.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:46.011Z,1528865086.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:46.396Z,1528865086.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:46.804Z,1528865086.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:47.192Z,1528865087.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:47.592Z,1528865087.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:47.996Z,1528865087.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:48.386Z,1528865088.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:48.800Z,1528865088.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:49.199Z,1528865089.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:49.601Z,1528865089.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:49.999Z,1528865089.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:50.396Z,1528865090.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:50.788Z,1528865090.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:51.192Z,1528865091.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:51.608Z,1528865091.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:52.002Z,1528865092.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:52.408Z,1528865092.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:52.798Z,1528865092.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:53.195Z,1528865093.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:53.599Z,1528865093.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:53.994Z,1528865093.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:54.403Z,1528865094.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:54.801Z,1528865094.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:55.201Z,1528865095.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:55.605Z,1528865095.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:56.008Z,1528865096.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:56.408Z,1528865096.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:56.792Z,1528865096.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:57.192Z,1528865097.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:57.605Z,1528865097.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:58.001Z,1528865098.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:58.402Z,1528865098.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:58.805Z,1528865098.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:59.203Z,1528865099.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:59.598Z,1528865099.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:44:59.999Z,1528865099.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:00.405Z,1528865100.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:00.809Z,1528865100.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:01.204Z,1528865101.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:01.603Z,1528865101.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:02.002Z,1528865102.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:02.408Z,1528865102.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:02.792Z,1528865102.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:03.202Z,1528865103.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:03.610Z,1528865103.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:04.008Z,1528865104.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:04.403Z,1528865104.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:04.797Z,1528865104.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:05.184Z,1528865105.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:05.609Z,1528865105.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:05.989Z,1528865105.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:06.385Z,1528865106.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:06.812Z,1528865106.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:07.216Z,1528865107.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:07.613Z,1528865107.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:07.989Z,1528865107.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:08.387Z,1528865108.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:08.813Z,1528865108.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:09.187Z,1528865109.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:09.613Z,1528865109.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:10.010Z,1528865110.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:10.416Z,1528865110.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:10.793Z,1528865110.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:11.188Z,1528865111.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:11.587Z,1528865111.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:12.018Z,1528865112.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:12.383Z,1528865112.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:12.815Z,1528865112.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:13.221Z,1528865113.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:13.619Z,1528865113.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:13.986Z,1528865113.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:14.394Z,1528865114.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:14.789Z,1528865114.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:15.186Z,1528865115.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:15.617Z,1528865115.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:15.997Z,1528865115.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:16.396Z,1528865116.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:16.820Z,1528865116.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:17.183Z,1528865117.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:17.622Z,1528865117.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:17.999Z,1528865117.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:18.419Z,1528865118.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:18.419Z,1528865118.419 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2018-06-13T04:45:18.419Z,1528865118.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:45:18.421Z,1528865118.421 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:18.421Z,1528865118.421 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27
2018-06-13T04:45:18.421Z,1528865118.421 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:45:18.423Z,1528865118.423 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:18.423Z,1528865118.423 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2018-06-13T04:45:18.423Z,1528865118.423 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:45:18.509Z,1528865118.509 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:45:18.509Z,1528865118.509 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:45:18.510Z,1528865118.510 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:45:18.869Z,1528865118.869 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:45:18.869Z,1528865118.869 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2018-06-13T04:45:18.869Z,1528865118.869 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:45:18.869Z,1528865118.869 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27
2018-06-13T04:45:18.870Z,1528865118.870 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:45:18.870Z,1528865118.870 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2018-06-13T04:45:19.191Z,1528865119.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:45:19.192Z,1528865119.192 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:45:19.192Z,1528865119.192 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:45:19.193Z,1528865119.193 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:45:19.194Z,1528865119.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:45:19.195Z,1528865119.195 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:45:19.195Z,1528865119.195 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:45:19.196Z,1528865119.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:45:19.196Z,1528865119.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:45:19.604Z,1528865119.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:45:19.605Z,1528865119.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:20.020Z,1528865120.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:45:20.037Z,1528865120.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:20.397Z,1528865120.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:45:20.398Z,1528865120.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:20.802Z,1528865120.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:45:20.803Z,1528865120.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:21.193Z,1528865121.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:45:21.194Z,1528865121.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:21.598Z,1528865121.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:45:21.599Z,1528865121.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:21.997Z,1528865121.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:45:21.998Z,1528865121.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:22.402Z,1528865122.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:45:22.403Z,1528865122.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:22.795Z,1528865122.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:45:22.796Z,1528865122.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:23.193Z,1528865123.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:45:23.194Z,1528865123.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:23.602Z,1528865123.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:45:23.603Z,1528865123.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:24.006Z,1528865124.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:45:24.007Z,1528865124.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:24.418Z,1528865124.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:45:24.419Z,1528865124.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:24.808Z,1528865124.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:45:24.808Z,1528865124.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:25.186Z,1528865125.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:45:25.187Z,1528865125.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:25.596Z,1528865125.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:45:25.598Z,1528865125.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:26.004Z,1528865126.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:45:26.005Z,1528865126.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:26.397Z,1528865126.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:45:26.398Z,1528865126.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:26.786Z,1528865126.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:45:26.787Z,1528865126.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:27.184Z,1528865127.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:45:27.185Z,1528865127.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:27.605Z,1528865127.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:45:27.606Z,1528865127.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:27.997Z,1528865127.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:45:27.998Z,1528865127.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:28.396Z,1528865128.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:45:28.398Z,1528865128.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:28.787Z,1528865128.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:45:28.788Z,1528865128.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:29.187Z,1528865129.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:45:29.188Z,1528865129.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:29.600Z,1528865129.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:45:29.601Z,1528865129.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:29.999Z,1528865129.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:45:30.000Z,1528865130.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:30.398Z,1528865130.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:45:30.398Z,1528865130.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:30.803Z,1528865130.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:45:30.809Z,1528865130.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:31.189Z,1528865131.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:45:31.190Z,1528865131.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:31.599Z,1528865131.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:45:31.600Z,1528865131.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:32.010Z,1528865132.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:45:32.012Z,1528865132.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:32.398Z,1528865132.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:45:32.400Z,1528865132.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:32.797Z,1528865132.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:45:32.798Z,1528865132.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:33.197Z,1528865133.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:45:33.198Z,1528865133.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:33.599Z,1528865133.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:45:33.600Z,1528865133.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:34.007Z,1528865134.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:45:34.009Z,1528865134.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:34.404Z,1528865134.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:45:34.405Z,1528865134.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:34.797Z,1528865134.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:45:34.798Z,1528865134.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:35.177Z,1528865135.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:45:35.178Z,1528865135.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:35.618Z,1528865135.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:45:35.619Z,1528865135.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:36.015Z,1528865136.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:45:36.016Z,1528865136.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:36.406Z,1528865136.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:45:36.407Z,1528865136.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:36.786Z,1528865136.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:45:36.786Z,1528865136.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:37.188Z,1528865137.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:45:37.188Z,1528865137.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:40.319Z,1528865140.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:40.327Z,1528865140.327 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T04:40:37.3Z
2018-06-13T04:45:40.327Z,1528865140.327 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T04:45:40.327Z,1528865140.327 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T04:45:40.490Z,1528865140.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:41.645Z,1528865141.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:41.827Z,1528865141.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:42.226Z,1528865142.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:42.630Z,1528865142.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:45.728Z,1528865145.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:45.821Z,1528865145.821 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0032.lzma
2018-06-13T04:45:45.884Z,1528865145.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:46.287Z,1528865146.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:46.621Z,1528865146.621 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0032.lzma.bak
2018-06-13T04:45:46.622Z,1528865146.622 [DataOverHttps](INFO): SBD MOMSN=8328594
2018-06-13T04:45:46.694Z,1528865146.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:48.551Z,1528865148.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:48.731Z,1528865148.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:49.129Z,1528865149.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:52.253Z,1528865152.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:52.432Z,1528865152.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:52.831Z,1528865152.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:53.240Z,1528865153.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:53.636Z,1528865153.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:54.008Z,1528865154.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:57.133Z,1528865157.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:57.229Z,1528865157.229 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20180613T032335/Express0033.lzma
2018-06-13T04:45:57.297Z,1528865157.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:57.708Z,1528865157.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:58.030Z,1528865158.030 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0033.lzma.bak
2018-06-13T04:45:58.032Z,1528865158.032 [DataOverHttps](INFO): SBD MOMSN=8328596
2018-06-13T04:45:58.129Z,1528865158.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:59.952Z,1528865159.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:45:59.955Z,1528865159.955 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T04:45:59.955Z,1528865159.955 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T04:45:59.956Z,1528865159.956 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T04:46:00.104Z,1528865160.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:00.496Z,1528865160.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:03.602Z,1528865163.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:03.746Z,1528865163.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:04.152Z,1528865164.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:04.551Z,1528865164.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:04.956Z,1528865164.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:05.315Z,1528865165.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:05.350Z,1528865165.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:05.711Z,1528865165.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:05.738Z,1528865165.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:06.115Z,1528865166.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:06.142Z,1528865166.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:06.526Z,1528865166.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:06.548Z,1528865166.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:06.931Z,1528865166.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:06.950Z,1528865166.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:07.335Z,1528865167.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:07.352Z,1528865167.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:07.735Z,1528865167.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:07.752Z,1528865167.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:08.115Z,1528865168.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:08.148Z,1528865168.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:08.515Z,1528865168.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:08.548Z,1528865168.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:08.916Z,1528865168.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:08.951Z,1528865168.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:09.315Z,1528865169.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:09.348Z,1528865169.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:09.735Z,1528865169.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:09.760Z,1528865169.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:10.136Z,1528865170.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:10.154Z,1528865170.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:10.528Z,1528865170.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:10.546Z,1528865170.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:10.915Z,1528865170.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:10.951Z,1528865170.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:11.326Z,1528865171.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:11.348Z,1528865171.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:11.715Z,1528865171.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:11.752Z,1528865171.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:12.116Z,1528865172.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:12.146Z,1528865172.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:12.516Z,1528865172.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:12.550Z,1528865172.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:12.929Z,1528865172.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:12.960Z,1528865172.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:13.329Z,1528865173.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:13.363Z,1528865173.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:13.729Z,1528865173.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:13.768Z,1528865173.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:14.115Z,1528865174.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:14.132Z,1528865174.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:14.520Z,1528865174.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:14.554Z,1528865174.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:14.920Z,1528865174.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:14.938Z,1528865174.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:15.315Z,1528865175.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:15.340Z,1528865175.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:15.729Z,1528865175.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:15.763Z,1528865175.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:16.133Z,1528865176.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:16.167Z,1528865176.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:16.534Z,1528865176.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:16.552Z,1528865176.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:16.921Z,1528865176.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:16.939Z,1528865176.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:17.326Z,1528865177.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:17.344Z,1528865177.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:17.720Z,1528865177.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:17.738Z,1528865177.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:18.126Z,1528865178.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:18.144Z,1528865178.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:18.519Z,1528865178.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:18.553Z,1528865178.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:18.927Z,1528865178.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:18.945Z,1528865178.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:19.330Z,1528865179.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:19.348Z,1528865179.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:19.734Z,1528865179.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:19.756Z,1528865179.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:20.125Z,1528865180.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:20.143Z,1528865180.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:20.519Z,1528865180.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:20.551Z,1528865180.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:20.920Z,1528865180.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:20.947Z,1528865180.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:21.327Z,1528865181.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:21.345Z,1528865181.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:21.735Z,1528865181.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:21.760Z,1528865181.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:22.136Z,1528865182.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:22.160Z,1528865182.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:22.527Z,1528865182.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:22.551Z,1528865182.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:22.918Z,1528865182.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:22.952Z,1528865182.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:23.319Z,1528865183.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:23.349Z,1528865183.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:23.715Z,1528865183.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:23.747Z,1528865183.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:24.119Z,1528865184.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:24.146Z,1528865184.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:24.518Z,1528865184.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:24.556Z,1528865184.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:24.935Z,1528865184.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:24.953Z,1528865184.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:25.335Z,1528865185.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:25.353Z,1528865185.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:25.738Z,1528865185.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:25.755Z,1528865185.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:26.119Z,1528865186.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:26.146Z,1528865186.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:26.519Z,1528865186.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:26.546Z,1528865186.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:26.920Z,1528865186.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:26.956Z,1528865186.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:27.311Z,1528865187.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:27.351Z,1528865187.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:27.730Z,1528865187.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:27.753Z,1528865187.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:28.141Z,1528865188.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:28.159Z,1528865188.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:28.531Z,1528865188.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:28.549Z,1528865188.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:28.921Z,1528865188.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:28.959Z,1528865188.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:29.318Z,1528865189.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:29.347Z,1528865189.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:29.719Z,1528865189.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:29.746Z,1528865189.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:30.120Z,1528865190.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:30.157Z,1528865190.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:30.512Z,1528865190.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:30.550Z,1528865190.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:30.930Z,1528865190.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:30.972Z,1528865190.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:31.337Z,1528865191.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:31.394Z,1528865191.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:31.729Z,1528865191.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:31.804Z,1528865191.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:32.115Z,1528865192.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:32.154Z,1528865192.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:32.545Z,1528865192.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:32.612Z,1528865192.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:32.922Z,1528865192.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:32.985Z,1528865192.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:33.322Z,1528865193.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:33.352Z,1528865193.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:33.734Z,1528865193.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:33.760Z,1528865193.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:34.138Z,1528865194.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:34.157Z,1528865194.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:34.523Z,1528865194.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:34.561Z,1528865194.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:34.918Z,1528865194.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:34.935Z,1528865194.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:35.314Z,1528865195.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:35.342Z,1528865195.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:35.719Z,1528865195.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:35.744Z,1528865195.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:36.119Z,1528865196.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:36.137Z,1528865196.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:36.524Z,1528865196.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:36.541Z,1528865196.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:36.926Z,1528865196.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:36.948Z,1528865196.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:37.332Z,1528865197.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:37.350Z,1528865197.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:37.732Z,1528865197.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:37.749Z,1528865197.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:38.117Z,1528865198.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:38.142Z,1528865198.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:38.519Z,1528865198.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:38.563Z,1528865198.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:38.923Z,1528865198.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:38.962Z,1528865198.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:39.323Z,1528865199.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:39.341Z,1528865199.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:39.728Z,1528865199.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:39.747Z,1528865199.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:40.130Z,1528865200.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:40.179Z,1528865200.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:40.533Z,1528865200.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:40.550Z,1528865200.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:40.924Z,1528865200.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:40.942Z,1528865200.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:41.325Z,1528865201.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:41.342Z,1528865201.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:41.715Z,1528865201.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:41.756Z,1528865201.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:42.122Z,1528865202.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:42.144Z,1528865202.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:42.523Z,1528865202.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:42.541Z,1528865202.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:42.926Z,1528865202.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:42.956Z,1528865202.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:43.335Z,1528865203.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:43.357Z,1528865203.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:43.737Z,1528865203.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:43.755Z,1528865203.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:44.111Z,1528865204.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:44.143Z,1528865204.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:44.518Z,1528865204.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:44.554Z,1528865204.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:44.911Z,1528865204.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:44.952Z,1528865204.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:45.312Z,1528865205.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:45.344Z,1528865205.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:45.733Z,1528865205.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:45.751Z,1528865205.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:46.138Z,1528865206.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:46.160Z,1528865206.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:46.527Z,1528865206.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:46.575Z,1528865206.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:46.922Z,1528865206.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:46.945Z,1528865206.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:47.312Z,1528865207.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:47.347Z,1528865207.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:47.735Z,1528865207.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:47.753Z,1528865207.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:48.134Z,1528865208.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:48.174Z,1528865208.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:48.536Z,1528865208.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:48.577Z,1528865208.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:48.920Z,1528865208.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:48.960Z,1528865208.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:49.325Z,1528865209.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:49.360Z,1528865209.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:49.711Z,1528865209.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:49.754Z,1528865209.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:50.122Z,1528865210.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:50.144Z,1528865210.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:50.518Z,1528865210.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:50.554Z,1528865210.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:50.936Z,1528865210.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:50.954Z,1528865210.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:51.331Z,1528865211.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:51.368Z,1528865211.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:51.731Z,1528865211.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:51.754Z,1528865211.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:52.112Z,1528865212.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:52.146Z,1528865212.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:52.515Z,1528865212.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:52.547Z,1528865212.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:52.916Z,1528865212.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:52.964Z,1528865212.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:53.315Z,1528865213.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:53.354Z,1528865213.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:53.732Z,1528865213.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:53.754Z,1528865213.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:54.140Z,1528865214.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:54.164Z,1528865214.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:54.531Z,1528865214.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:54.563Z,1528865214.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:54.916Z,1528865214.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:54.956Z,1528865214.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:55.315Z,1528865215.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:55.356Z,1528865215.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:55.734Z,1528865215.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:55.759Z,1528865215.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:56.135Z,1528865216.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:56.175Z,1528865216.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:56.532Z,1528865216.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:56.554Z,1528865216.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:56.913Z,1528865216.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:56.954Z,1528865216.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:57.315Z,1528865217.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:57.356Z,1528865217.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:57.730Z,1528865217.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:57.754Z,1528865217.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:58.134Z,1528865218.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:58.165Z,1528865218.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:58.532Z,1528865218.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:58.555Z,1528865218.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:58.916Z,1528865218.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:58.960Z,1528865218.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:59.315Z,1528865219.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:59.352Z,1528865219.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:46:59.725Z,1528865219.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:46:59.757Z,1528865219.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:00.140Z,1528865220.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:00.163Z,1528865220.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:00.543Z,1528865220.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:00.568Z,1528865220.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:03.642Z,1528865223.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:03.660Z,1528865223.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:03.776Z,1528865223.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:03.805Z,1528865223.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:04.194Z,1528865224.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:04.213Z,1528865224.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:04.592Z,1528865224.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:04.616Z,1528865224.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:04.988Z,1528865224.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:05.012Z,1528865225.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:05.371Z,1528865225.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:05.405Z,1528865225.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:05.767Z,1528865225.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:05.800Z,1528865225.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:06.171Z,1528865226.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:06.202Z,1528865226.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:06.570Z,1528865226.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:06.604Z,1528865226.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:06.989Z,1528865226.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:07.007Z,1528865227.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:07.390Z,1528865227.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:07.408Z,1528865227.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:07.790Z,1528865227.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:07.808Z,1528865227.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:08.170Z,1528865228.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:08.208Z,1528865228.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:08.570Z,1528865228.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:08.603Z,1528865228.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:08.968Z,1528865228.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:09.016Z,1528865229.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:09.368Z,1528865229.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:09.412Z,1528865229.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:09.779Z,1528865229.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:09.812Z,1528865229.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:10.181Z,1528865230.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:10.217Z,1528865230.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:10.578Z,1528865230.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:10.610Z,1528865230.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:10.967Z,1528865230.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:11.012Z,1528865231.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:11.370Z,1528865231.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:11.388Z,1528865231.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:11.771Z,1528865231.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:11.805Z,1528865231.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:12.172Z,1528865232.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:12.216Z,1528865232.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:12.572Z,1528865232.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:12.617Z,1528865232.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:12.983Z,1528865232.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:13.016Z,1528865233.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:13.385Z,1528865233.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:13.413Z,1528865233.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:13.789Z,1528865233.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:13.828Z,1528865233.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:14.166Z,1528865234.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:14.211Z,1528865234.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:14.571Z,1528865234.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:14.590Z,1528865234.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.379326 seconds old.
2018-06-13T04:47:14.591Z,1528865234.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:14.592Z,1528865234.592 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.379763 seconds old.
2018-06-13T04:47:14.605Z,1528865234.605 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.380134 seconds old.
2018-06-13T04:47:14.975Z,1528865234.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:14.991Z,1528865234.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.781023 seconds old.
2018-06-13T04:47:14.992Z,1528865234.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:14.993Z,1528865234.993 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.781423 seconds old.
2018-06-13T04:47:14.994Z,1528865234.994 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.781817 seconds old.
2018-06-13T04:47:15.367Z,1528865235.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:15.413Z,1528865235.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.203048 seconds old.
2018-06-13T04:47:15.414Z,1528865235.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:15.415Z,1528865235.415 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.203369 seconds old.
2018-06-13T04:47:15.416Z,1528865235.416 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.203737 seconds old.
2018-06-13T04:47:15.784Z,1528865235.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:15.829Z,1528865235.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:16.184Z,1528865236.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:16.220Z,1528865236.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:16.581Z,1528865236.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:16.615Z,1528865236.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:16.970Z,1528865236.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:17.020Z,1528865237.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:17.371Z,1528865237.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:17.394Z,1528865237.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:17.771Z,1528865237.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:17.794Z,1528865237.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:18.177Z,1528865238.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:18.217Z,1528865238.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:18.570Z,1528865238.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:18.616Z,1528865238.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:18.974Z,1528865238.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:18.998Z,1528865238.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:19.384Z,1528865239.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:19.403Z,1528865239.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:19.783Z,1528865239.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:19.803Z,1528865239.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:20.166Z,1528865240.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:20.219Z,1528865240.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:20.571Z,1528865240.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:20.599Z,1528865240.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:20.972Z,1528865240.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:21.001Z,1528865241.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:21.368Z,1528865241.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:21.404Z,1528865241.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:21.778Z,1528865241.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:21.827Z,1528865241.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:22.181Z,1528865242.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:22.221Z,1528865242.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:22.580Z,1528865242.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:22.601Z,1528865242.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:22.974Z,1528865242.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:23.008Z,1528865243.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:23.374Z,1528865243.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:23.425Z,1528865243.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:23.778Z,1528865243.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:23.802Z,1528865243.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:24.188Z,1528865244.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:24.207Z,1528865244.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:24.584Z,1528865244.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:24.603Z,1528865244.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:24.974Z,1528865244.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:25.025Z,1528865245.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:25.373Z,1528865245.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:25.391Z,1528865245.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:25.784Z,1528865245.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:25.807Z,1528865245.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:26.185Z,1528865246.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:26.203Z,1528865246.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:26.582Z,1528865246.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:26.625Z,1528865246.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:26.975Z,1528865246.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:26.993Z,1528865246.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:27.373Z,1528865247.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:27.396Z,1528865247.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:27.785Z,1528865247.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:27.803Z,1528865247.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:28.184Z,1528865248.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:28.230Z,1528865248.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:28.579Z,1528865248.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:28.600Z,1528865248.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:28.971Z,1528865248.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:29.001Z,1528865249.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:29.374Z,1528865249.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:29.397Z,1528865249.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:29.782Z,1528865249.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:29.800Z,1528865249.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:30.182Z,1528865250.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:30.206Z,1528865250.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:30.583Z,1528865250.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:30.606Z,1528865250.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:30.975Z,1528865250.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:30.998Z,1528865250.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:31.371Z,1528865251.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:31.394Z,1528865251.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:31.783Z,1528865251.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:31.803Z,1528865251.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:32.182Z,1528865252.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:32.206Z,1528865252.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:32.582Z,1528865252.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:32.605Z,1528865252.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:32.971Z,1528865252.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:33.027Z,1528865253.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:33.373Z,1528865253.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:33.391Z,1528865253.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:33.782Z,1528865253.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:33.806Z,1528865253.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:34.183Z,1528865254.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:34.206Z,1528865254.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:34.579Z,1528865254.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:34.628Z,1528865254.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:34.974Z,1528865254.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:34.991Z,1528865254.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:35.369Z,1528865255.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:35.387Z,1528865255.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:35.779Z,1528865255.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:35.803Z,1528865255.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:36.182Z,1528865256.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:36.205Z,1528865256.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:36.583Z,1528865256.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:36.605Z,1528865256.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:36.963Z,1528865256.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:37.001Z,1528865257.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:37.371Z,1528865257.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:37.413Z,1528865257.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:37.786Z,1528865257.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:37.817Z,1528865257.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:38.182Z,1528865258.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:38.217Z,1528865258.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:38.582Z,1528865258.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:38.610Z,1528865258.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:38.968Z,1528865258.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:39.013Z,1528865259.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:39.363Z,1528865259.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:39.400Z,1528865259.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:39.789Z,1528865259.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:39.807Z,1528865259.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:40.188Z,1528865260.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:40.212Z,1528865260.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:40.591Z,1528865260.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:40.614Z,1528865260.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:40.968Z,1528865260.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:41.003Z,1528865261.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:41.368Z,1528865261.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:41.410Z,1528865261.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:41.774Z,1528865261.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:41.818Z,1528865261.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:42.188Z,1528865262.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:42.212Z,1528865262.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:42.589Z,1528865262.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:42.608Z,1528865262.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:42.968Z,1528865262.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:43.007Z,1528865263.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:43.367Z,1528865263.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:43.405Z,1528865263.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:43.781Z,1528865263.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:43.826Z,1528865263.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:44.185Z,1528865264.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:44.220Z,1528865264.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:44.578Z,1528865264.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:44.610Z,1528865264.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:44.970Z,1528865264.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:44.988Z,1528865264.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:45.371Z,1528865265.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:45.416Z,1528865265.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:45.781Z,1528865265.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:45.816Z,1528865265.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:46.181Z,1528865266.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:46.200Z,1528865266.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:46.578Z,1528865266.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:46.596Z,1528865266.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:46.971Z,1528865266.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:47.003Z,1528865267.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:47.372Z,1528865267.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:47.395Z,1528865267.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:47.782Z,1528865267.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:47.805Z,1528865267.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:48.182Z,1528865268.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:48.202Z,1528865268.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:48.586Z,1528865268.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:48.605Z,1528865268.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:48.964Z,1528865268.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:48.995Z,1528865268.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:49.371Z,1528865269.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:49.395Z,1528865269.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:49.787Z,1528865269.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:49.806Z,1528865269.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:50.187Z,1528865270.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:50.206Z,1528865270.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:50.582Z,1528865270.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:50.604Z,1528865270.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:50.968Z,1528865270.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:51.001Z,1528865271.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:51.363Z,1528865271.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:51.392Z,1528865271.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:51.784Z,1528865271.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:51.811Z,1528865271.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:52.188Z,1528865272.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:52.207Z,1528865272.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:52.589Z,1528865272.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:52.607Z,1528865272.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:52.968Z,1528865272.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:53.003Z,1528865273.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:53.367Z,1528865273.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:53.402Z,1528865273.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:53.778Z,1528865273.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:53.818Z,1528865273.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:54.186Z,1528865274.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:54.221Z,1528865274.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:54.586Z,1528865274.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:54.621Z,1528865274.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:54.968Z,1528865274.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:55.007Z,1528865275.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:55.367Z,1528865275.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:55.401Z,1528865275.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:55.782Z,1528865275.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:55.813Z,1528865275.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:56.183Z,1528865276.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:56.213Z,1528865276.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:56.577Z,1528865276.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:56.617Z,1528865276.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:56.968Z,1528865276.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:56.986Z,1528865276.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:57.371Z,1528865277.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:57.389Z,1528865277.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:57.781Z,1528865277.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:57.815Z,1528865277.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:58.182Z,1528865278.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:58.200Z,1528865278.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:58.578Z,1528865278.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:58.596Z,1528865278.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:58.972Z,1528865278.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:58.992Z,1528865278.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:59.373Z,1528865279.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:59.391Z,1528865279.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:47:59.778Z,1528865279.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:47:59.796Z,1528865279.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:00.185Z,1528865280.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:00.226Z,1528865280.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:00.585Z,1528865280.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:00.604Z,1528865280.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:03.682Z,1528865283.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:03.700Z,1528865283.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:03.807Z,1528865283.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:03.876Z,1528865283.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:04.229Z,1528865284.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:04.252Z,1528865284.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:04.624Z,1528865284.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:04.647Z,1528865284.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:05.018Z,1528865285.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:05.042Z,1528865285.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:05.404Z,1528865285.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:05.444Z,1528865285.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:05.799Z,1528865285.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:05.833Z,1528865285.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:06.204Z,1528865286.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:06.235Z,1528865286.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:06.604Z,1528865286.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:06.622Z,1528865286.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:07.017Z,1528865287.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:07.053Z,1528865287.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:07.421Z,1528865287.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:07.452Z,1528865287.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:07.821Z,1528865287.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:07.856Z,1528865287.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:08.204Z,1528865288.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:08.228Z,1528865288.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:08.607Z,1528865288.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:08.625Z,1528865288.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:09.007Z,1528865289.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:09.025Z,1528865289.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:09.406Z,1528865289.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:09.424Z,1528865289.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:09.815Z,1528865289.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:09.833Z,1528865289.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:10.218Z,1528865290.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:10.236Z,1528865290.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:10.615Z,1528865290.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:10.640Z,1528865290.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:11.007Z,1528865291.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:11.031Z,1528865291.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:11.407Z,1528865291.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:11.432Z,1528865291.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:11.819Z,1528865291.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:11.838Z,1528865291.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:12.222Z,1528865292.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:12.240Z,1528865292.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:12.624Z,1528865292.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:12.642Z,1528865292.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:13.000Z,1528865293.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:13.030Z,1528865293.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:13.407Z,1528865293.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:13.431Z,1528865293.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:13.824Z,1528865293.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:13.843Z,1528865293.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:14.222Z,1528865294.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:14.240Z,1528865294.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:14.618Z,1528865294.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:14.644Z,1528865294.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:15.013Z,1528865295.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:15.031Z,1528865295.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:15.399Z,1528865295.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:15.433Z,1528865295.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:15.814Z,1528865295.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:15.847Z,1528865295.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:16.225Z,1528865296.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:16.243Z,1528865296.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:16.611Z,1528865296.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:16.648Z,1528865296.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:17.004Z,1528865297.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:17.030Z,1528865297.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:17.403Z,1528865297.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:17.444Z,1528865297.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:17.814Z,1528865297.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:17.850Z,1528865297.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:18.218Z,1528865298.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:18.250Z,1528865298.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:18.617Z,1528865298.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:18.652Z,1528865298.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:19.007Z,1528865299.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:19.025Z,1528865299.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:19.408Z,1528865299.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:19.426Z,1528865299.426 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:19.426Z,1528865299.426 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2018-06-13T04:48:19.426Z,1528865299.426 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:48:19.428Z,1528865299.428 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:19.428Z,1528865299.428 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28
2018-06-13T04:48:19.428Z,1528865299.428 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:48:19.430Z,1528865299.430 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:19.430Z,1528865299.430 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2018-06-13T04:48:19.430Z,1528865299.430 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:48:19.513Z,1528865299.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:48:19.513Z,1528865299.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:48:19.513Z,1528865299.513 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:48:19.818Z,1528865299.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:19.917Z,1528865299.917 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:48:19.917Z,1528865299.917 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2018-06-13T04:48:19.918Z,1528865299.918 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:48:19.918Z,1528865299.918 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28
2018-06-13T04:48:19.918Z,1528865299.918 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:48:19.918Z,1528865299.918 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2018-06-13T04:48:20.214Z,1528865300.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:20.231Z,1528865300.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:48:20.231Z,1528865300.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:48:20.231Z,1528865300.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:48:20.232Z,1528865300.232 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:48:20.232Z,1528865300.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:48:20.232Z,1528865300.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:48:20.233Z,1528865300.233 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:48:20.233Z,1528865300.233 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:48:20.234Z,1528865300.234 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:48:20.610Z,1528865300.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:20.632Z,1528865300.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:48:20.633Z,1528865300.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:21.011Z,1528865301.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:21.029Z,1528865301.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:48:21.030Z,1528865301.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:21.411Z,1528865301.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:21.428Z,1528865301.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:48:21.429Z,1528865301.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:21.818Z,1528865301.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:21.840Z,1528865301.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:48:21.840Z,1528865301.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:22.224Z,1528865302.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:22.242Z,1528865302.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:48:22.243Z,1528865302.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:22.623Z,1528865302.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:22.640Z,1528865302.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:48:22.641Z,1528865302.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:23.013Z,1528865303.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:23.030Z,1528865303.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:48:23.031Z,1528865303.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:23.404Z,1528865303.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:23.443Z,1528865303.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:48:23.444Z,1528865303.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:23.820Z,1528865303.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:23.838Z,1528865303.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:48:23.838Z,1528865303.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:24.225Z,1528865304.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:24.242Z,1528865304.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:48:24.243Z,1528865304.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:24.625Z,1528865304.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:24.642Z,1528865304.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:48:24.643Z,1528865304.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:25.003Z,1528865305.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:25.031Z,1528865305.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:48:25.032Z,1528865305.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:25.404Z,1528865305.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:25.431Z,1528865305.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:48:25.432Z,1528865305.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:25.800Z,1528865305.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:25.842Z,1528865305.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:48:25.843Z,1528865305.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:26.222Z,1528865306.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:26.244Z,1528865306.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:48:26.245Z,1528865306.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:26.623Z,1528865306.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:26.641Z,1528865306.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:48:26.642Z,1528865306.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:27.024Z,1528865307.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:27.043Z,1528865307.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:48:27.044Z,1528865307.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:27.400Z,1528865307.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:27.425Z,1528865307.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:48:27.426Z,1528865307.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:27.803Z,1528865307.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:27.837Z,1528865307.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:48:27.838Z,1528865307.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:28.204Z,1528865308.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:28.223Z,1528865308.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:48:28.224Z,1528865308.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:28.607Z,1528865308.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:28.648Z,1528865308.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:48:28.653Z,1528865308.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:29.018Z,1528865309.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:29.051Z,1528865309.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:48:29.052Z,1528865309.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:29.417Z,1528865309.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:29.435Z,1528865309.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:48:29.436Z,1528865309.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:29.814Z,1528865309.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:29.831Z,1528865309.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:48:29.832Z,1528865309.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:30.209Z,1528865310.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:30.229Z,1528865310.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:48:30.230Z,1528865310.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:30.610Z,1528865310.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:30.628Z,1528865310.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:48:30.629Z,1528865310.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:31.011Z,1528865311.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:31.028Z,1528865311.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:48:31.029Z,1528865311.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:31.410Z,1528865311.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:31.428Z,1528865311.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:48:31.429Z,1528865311.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:31.807Z,1528865311.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:31.841Z,1528865311.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:48:31.842Z,1528865311.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:32.215Z,1528865312.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:32.233Z,1528865312.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:48:32.234Z,1528865312.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:32.617Z,1528865312.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:32.635Z,1528865312.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:48:32.636Z,1528865312.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:33.018Z,1528865313.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:33.036Z,1528865313.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:48:33.037Z,1528865313.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:33.403Z,1528865313.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:33.427Z,1528865313.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:48:33.428Z,1528865313.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:33.807Z,1528865313.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:33.831Z,1528865313.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:48:33.832Z,1528865313.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:34.208Z,1528865314.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:34.234Z,1528865314.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:48:34.235Z,1528865314.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:34.610Z,1528865314.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:34.627Z,1528865314.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:48:34.628Z,1528865314.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:35.020Z,1528865315.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:35.039Z,1528865315.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:48:35.039Z,1528865315.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:35.420Z,1528865315.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:35.438Z,1528865315.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:48:35.439Z,1528865315.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:35.817Z,1528865315.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:35.834Z,1528865315.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:48:35.835Z,1528865315.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:36.207Z,1528865316.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:36.232Z,1528865316.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:48:36.233Z,1528865316.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:36.608Z,1528865316.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:36.634Z,1528865316.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:48:36.635Z,1528865316.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:36.000Z,1528865317.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:37.033Z,1528865317.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:48:37.034Z,1528865317.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:37.404Z,1528865317.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:37.442Z,1528865317.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:48:37.443Z,1528865317.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:37.799Z,1528865317.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:37.831Z,1528865317.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:48:37.831Z,1528865317.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:38.215Z,1528865318.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:38.242Z,1528865318.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:48:38.243Z,1528865318.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:38.622Z,1528865318.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:38.647Z,1528865318.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:48:38.648Z,1528865318.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:39.026Z,1528865319.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:39.044Z,1528865319.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:48:39.045Z,1528865319.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:39.399Z,1528865319.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:39.433Z,1528865319.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T04:48:39.434Z,1528865319.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:39.803Z,1528865319.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:39.847Z,1528865319.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:40.200Z,1528865320.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:40.218Z,1528865320.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:40.603Z,1528865320.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:40.648Z,1528865320.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:41.017Z,1528865321.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:41.054Z,1528865321.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:41.421Z,1528865321.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:41.453Z,1528865321.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:41.813Z,1528865321.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:41.848Z,1528865321.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:42.207Z,1528865322.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:42.232Z,1528865322.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:42.607Z,1528865322.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:42.624Z,1528865322.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:43.002Z,1528865323.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:43.036Z,1528865323.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:43.408Z,1528865323.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:43.432Z,1528865323.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:43.809Z,1528865323.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:43.826Z,1528865323.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:44.211Z,1528865324.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:44.228Z,1528865324.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:44.617Z,1528865324.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:44.636Z,1528865324.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:45.014Z,1528865325.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:45.031Z,1528865325.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:45.409Z,1528865325.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:45.427Z,1528865325.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:45.808Z,1528865325.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:45.826Z,1528865325.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:46.210Z,1528865326.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:46.228Z,1528865326.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:46.608Z,1528865326.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:46.626Z,1528865326.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:47.014Z,1528865327.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:47.032Z,1528865327.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:47.414Z,1528865327.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:47.432Z,1528865327.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:47.814Z,1528865327.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:47.836Z,1528865327.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:48.210Z,1528865328.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:48.229Z,1528865328.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:48.609Z,1528865328.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:48.627Z,1528865328.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:49.004Z,1528865329.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:49.031Z,1528865329.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:49.408Z,1528865329.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:49.433Z,1528865329.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:49.806Z,1528865329.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:49.823Z,1528865329.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:50.214Z,1528865330.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:50.236Z,1528865330.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:50.617Z,1528865330.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:50.635Z,1528865330.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:51.017Z,1528865331.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:51.040Z,1528865331.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:51.408Z,1528865331.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:51.426Z,1528865331.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:51.808Z,1528865331.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:51.826Z,1528865331.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:52.207Z,1528865332.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:52.224Z,1528865332.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:52.608Z,1528865332.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:52.626Z,1528865332.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:53.014Z,1528865333.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:53.032Z,1528865333.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:53.417Z,1528865333.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:53.434Z,1528865333.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:53.814Z,1528865333.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:53.832Z,1528865333.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:54.208Z,1528865334.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:54.227Z,1528865334.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:54.610Z,1528865334.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:54.632Z,1528865334.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:55.010Z,1528865335.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:55.032Z,1528865335.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:55.410Z,1528865335.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:55.428Z,1528865335.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:55.808Z,1528865335.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:55.840Z,1528865335.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:56.218Z,1528865336.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:56.241Z,1528865336.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:56.617Z,1528865336.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:56.635Z,1528865336.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:57.016Z,1528865337.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:57.034Z,1528865337.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:57.410Z,1528865337.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:57.432Z,1528865337.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:57.807Z,1528865337.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:57.839Z,1528865337.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:58.207Z,1528865338.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:58.232Z,1528865338.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:58.610Z,1528865338.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:58.632Z,1528865338.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:59.016Z,1528865339.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:59.034Z,1528865339.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:59.417Z,1528865339.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:59.434Z,1528865339.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:48:59.817Z,1528865339.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:48:59.835Z,1528865339.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:00.213Z,1528865340.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:00.231Z,1528865340.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:00.615Z,1528865340.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:00.633Z,1528865340.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:03.723Z,1528865343.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:03.741Z,1528865343.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:03.874Z,1528865343.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:03.917Z,1528865343.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:04.285Z,1528865344.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:04.326Z,1528865344.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:04.689Z,1528865344.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:04.722Z,1528865344.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:05.082Z,1528865345.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:05.099Z,1528865345.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:05.473Z,1528865345.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:05.490Z,1528865345.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:05.874Z,1528865345.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:05.896Z,1528865345.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:06.274Z,1528865346.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:06.291Z,1528865346.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:06.668Z,1528865346.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:06.686Z,1528865346.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:07.077Z,1528865347.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:07.112Z,1528865347.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:07.478Z,1528865347.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:07.496Z,1528865347.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:07.885Z,1528865347.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:07.903Z,1528865347.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:08.274Z,1528865348.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:08.292Z,1528865348.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:08.671Z,1528865348.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:08.702Z,1528865348.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:09.074Z,1528865349.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:09.092Z,1528865349.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:09.475Z,1528865349.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:09.492Z,1528865349.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:09.874Z,1528865349.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:09.892Z,1528865349.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:10.282Z,1528865350.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:10.300Z,1528865350.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:10.682Z,1528865350.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:10.704Z,1528865350.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:11.078Z,1528865351.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:11.096Z,1528865351.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:11.470Z,1528865351.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:11.488Z,1528865351.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:11.874Z,1528865351.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:11.892Z,1528865351.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:12.271Z,1528865352.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:12.303Z,1528865352.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:12.671Z,1528865352.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:12.696Z,1528865352.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:13.082Z,1528865353.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:13.104Z,1528865353.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:13.481Z,1528865353.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:13.499Z,1528865353.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:13.881Z,1528865353.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:13.904Z,1528865353.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:14.273Z,1528865354.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:14.291Z,1528865354.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:14.676Z,1528865354.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:14.694Z,1528865354.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:15.074Z,1528865355.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:15.091Z,1528865355.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:15.474Z,1528865355.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:15.492Z,1528865355.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:15.871Z,1528865355.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:15.893Z,1528865355.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:16.281Z,1528865356.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:16.299Z,1528865356.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:16.682Z,1528865356.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:16.704Z,1528865356.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:17.082Z,1528865357.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:17.099Z,1528865357.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:17.474Z,1528865357.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:17.496Z,1528865357.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:17.873Z,1528865357.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:17.891Z,1528865357.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:18.266Z,1528865358.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:18.299Z,1528865358.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:18.671Z,1528865358.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:18.698Z,1528865358.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:19.083Z,1528865359.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:19.101Z,1528865359.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:19.483Z,1528865359.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:19.508Z,1528865359.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:19.884Z,1528865359.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:19.908Z,1528865359.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:20.273Z,1528865360.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:20.291Z,1528865360.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:20.671Z,1528865360.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:20.698Z,1528865360.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:21.079Z,1528865361.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:21.101Z,1528865361.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:21.501Z,1528865361.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:21.531Z,1528865361.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:21.863Z,1528865361.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:21.901Z,1528865361.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:22.289Z,1528865362.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:22.306Z,1528865362.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:22.688Z,1528865362.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:22.706Z,1528865362.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:23.085Z,1528865363.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:23.102Z,1528865363.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:23.467Z,1528865363.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:23.507Z,1528865363.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:23.867Z,1528865363.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:23.904Z,1528865363.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:24.268Z,1528865364.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:24.298Z,1528865364.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:24.667Z,1528865364.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:24.707Z,1528865364.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:25.073Z,1528865365.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:25.102Z,1528865365.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:25.487Z,1528865365.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:25.512Z,1528865365.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:25.886Z,1528865365.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:25.911Z,1528865365.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:26.268Z,1528865366.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:26.306Z,1528865366.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:26.667Z,1528865366.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:26.707Z,1528865366.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:27.067Z,1528865367.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:27.102Z,1528865367.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:27.464Z,1528865367.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:27.482Z,1528865367.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:27.867Z,1528865367.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:27.908Z,1528865367.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:28.286Z,1528865368.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:28.316Z,1528865368.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:28.685Z,1528865368.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:28.712Z,1528865368.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:29.082Z,1528865369.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:29.115Z,1528865369.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:29.471Z,1528865369.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:29.490Z,1528865369.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:29.866Z,1528865369.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:29.884Z,1528865369.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:30.270Z,1528865370.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:30.289Z,1528865370.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:30.670Z,1528865370.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:30.688Z,1528865370.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:31.078Z,1528865371.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:31.095Z,1528865371.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:31.482Z,1528865371.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:31.522Z,1528865371.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:31.882Z,1528865371.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:31.900Z,1528865371.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:32.272Z,1528865372.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:32.290Z,1528865372.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:32.672Z,1528865372.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:32.696Z,1528865372.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:33.074Z,1528865373.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:33.092Z,1528865373.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:33.473Z,1528865373.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:33.491Z,1528865373.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:33.872Z,1528865373.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:33.890Z,1528865373.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:34.282Z,1528865374.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:34.300Z,1528865374.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:34.682Z,1528865374.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:34.699Z,1528865374.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:35.074Z,1528865375.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:35.092Z,1528865375.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:35.473Z,1528865375.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:35.491Z,1528865375.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:35.872Z,1528865375.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:35.890Z,1528865375.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:36.270Z,1528865376.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:36.302Z,1528865376.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:36.673Z,1528865376.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:36.691Z,1528865376.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:37.078Z,1528865377.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:37.096Z,1528865377.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:37.482Z,1528865377.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:37.499Z,1528865377.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:37.877Z,1528865377.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:37.900Z,1528865377.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:38.269Z,1528865378.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:38.287Z,1528865378.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:38.670Z,1528865378.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:38.699Z,1528865378.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:39.073Z,1528865379.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:39.091Z,1528865379.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:39.470Z,1528865379.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:39.488Z,1528865379.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:39.872Z,1528865379.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:39.896Z,1528865379.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:40.282Z,1528865380.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:40.300Z,1528865380.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:40.682Z,1528865380.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:40.700Z,1528865380.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:41.078Z,1528865381.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:41.095Z,1528865381.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:41.472Z,1528865381.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:41.511Z,1528865381.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:41.866Z,1528865381.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:41.899Z,1528865381.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:42.271Z,1528865382.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:42.301Z,1528865382.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:42.672Z,1528865382.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:42.699Z,1528865382.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:43.079Z,1528865383.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:43.097Z,1528865383.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:43.486Z,1528865383.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:43.503Z,1528865383.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:43.887Z,1528865383.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:43.905Z,1528865383.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:44.263Z,1528865384.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:44.299Z,1528865384.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:44.672Z,1528865384.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:44.700Z,1528865384.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:45.067Z,1528865385.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:45.108Z,1528865385.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:45.468Z,1528865385.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:45.499Z,1528865385.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:45.867Z,1528865385.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:45.900Z,1528865385.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:46.289Z,1528865386.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:46.307Z,1528865386.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:46.687Z,1528865386.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:46.706Z,1528865386.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:47.082Z,1528865387.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:47.103Z,1528865387.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:47.471Z,1528865387.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:47.514Z,1528865387.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:47.867Z,1528865387.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:47.906Z,1528865387.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:48.268Z,1528865388.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:48.307Z,1528865388.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:48.667Z,1528865388.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:48.710Z,1528865388.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:49.078Z,1528865389.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:49.106Z,1528865389.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:49.482Z,1528865389.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:49.511Z,1528865389.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:49.882Z,1528865389.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:49.911Z,1528865389.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:50.263Z,1528865390.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:50.281Z,1528865390.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:50.667Z,1528865390.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:50.684Z,1528865390.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:51.067Z,1528865391.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:51.085Z,1528865391.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:51.468Z,1528865391.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:51.486Z,1528865391.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:51.870Z,1528865391.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:51.888Z,1528865391.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:52.282Z,1528865392.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:52.317Z,1528865392.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:52.682Z,1528865392.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:52.714Z,1528865392.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:53.082Z,1528865393.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:53.118Z,1528865393.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:53.470Z,1528865393.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:53.516Z,1528865393.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:53.866Z,1528865393.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:53.884Z,1528865393.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:54.271Z,1528865394.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:54.289Z,1528865394.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:54.670Z,1528865394.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:54.688Z,1528865394.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:55.082Z,1528865395.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:55.116Z,1528865395.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:55.481Z,1528865395.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:55.499Z,1528865395.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:55.886Z,1528865395.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:55.904Z,1528865395.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:56.274Z,1528865396.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:56.296Z,1528865396.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:56.673Z,1528865396.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:56.690Z,1528865396.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:57.066Z,1528865397.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:57.096Z,1528865397.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:57.467Z,1528865397.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:57.492Z,1528865397.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:57.871Z,1528865397.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:57.900Z,1528865397.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:58.284Z,1528865398.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:58.303Z,1528865398.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:58.684Z,1528865398.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:58.702Z,1528865398.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:59.086Z,1528865399.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:59.104Z,1528865399.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:59.474Z,1528865399.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:59.500Z,1528865399.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:49:59.864Z,1528865399.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:49:59.892Z,1528865399.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:00.268Z,1528865400.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:00.295Z,1528865400.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:00.679Z,1528865400.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:00.697Z,1528865400.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:03.798Z,1528865403.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:03.816Z,1528865403.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:03.965Z,1528865403.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:04.009Z,1528865404.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:04.361Z,1528865404.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:04.387Z,1528865404.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:04.751Z,1528865404.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:04.777Z,1528865404.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:05.153Z,1528865405.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:05.171Z,1528865405.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:05.552Z,1528865405.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:05.584Z,1528865405.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:05.950Z,1528865405.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:05.967Z,1528865405.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:06.359Z,1528865406.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:06.450Z,1528865406.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:06.761Z,1528865406.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:06.783Z,1528865406.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:07.159Z,1528865407.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:07.177Z,1528865407.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:07.556Z,1528865407.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:07.574Z,1528865407.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:07.955Z,1528865407.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:07.973Z,1528865407.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:08.351Z,1528865408.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:08.369Z,1528865408.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:08.752Z,1528865408.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:08.782Z,1528865408.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:09.164Z,1528865409.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:09.184Z,1528865409.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:09.563Z,1528865409.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:09.581Z,1528865409.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:09.964Z,1528865409.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:09.982Z,1528865409.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:10.354Z,1528865410.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:10.372Z,1528865410.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:10.748Z,1528865410.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:10.767Z,1528865410.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:11.146Z,1528865411.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:11.171Z,1528865411.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:11.551Z,1528865411.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:11.585Z,1528865411.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:11.953Z,1528865411.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:11.971Z,1528865411.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:12.362Z,1528865412.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:12.380Z,1528865412.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:12.761Z,1528865412.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:12.788Z,1528865412.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:13.163Z,1528865413.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:13.182Z,1528865413.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:13.551Z,1528865413.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:13.580Z,1528865413.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:13.948Z,1528865413.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:13.985Z,1528865413.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:14.348Z,1528865414.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:14.376Z,1528865414.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:14.747Z,1528865414.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:14.783Z,1528865414.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:15.167Z,1528865415.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:15.185Z,1528865415.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:15.563Z,1528865415.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:15.582Z,1528865415.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:15.965Z,1528865415.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:15.983Z,1528865415.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:16.347Z,1528865416.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:16.377Z,1528865416.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:16.747Z,1528865416.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:16.774Z,1528865416.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:17.147Z,1528865417.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:17.183Z,1528865417.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:17.548Z,1528865417.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:17.579Z,1528865417.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:17.943Z,1528865417.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:17.971Z,1528865417.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:18.363Z,1528865418.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:18.381Z,1528865418.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:18.771Z,1528865418.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:18.790Z,1528865418.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:19.163Z,1528865419.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:19.181Z,1528865419.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:19.547Z,1528865419.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:19.583Z,1528865419.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:19.947Z,1528865419.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:19.979Z,1528865419.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:20.344Z,1528865420.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:20.382Z,1528865420.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:20.747Z,1528865420.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:20.775Z,1528865420.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:21.168Z,1528865421.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:21.186Z,1528865421.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:21.567Z,1528865421.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:21.586Z,1528865421.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:21.963Z,1528865421.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:21.981Z,1528865421.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:22.347Z,1528865422.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:22.382Z,1528865422.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:22.743Z,1528865422.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:22.785Z,1528865422.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:23.147Z,1528865423.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:23.183Z,1528865423.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:23.548Z,1528865423.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:23.586Z,1528865423.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:23.947Z,1528865423.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:23.983Z,1528865423.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:24.363Z,1528865424.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:24.381Z,1528865424.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:24.767Z,1528865424.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:24.786Z,1528865424.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:25.153Z,1528865425.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:25.189Z,1528865425.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:25.547Z,1528865425.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:25.582Z,1528865425.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:25.947Z,1528865425.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:25.978Z,1528865425.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:26.348Z,1528865426.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:26.390Z,1528865426.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:26.747Z,1528865426.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:26.781Z,1528865426.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:27.161Z,1528865427.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:27.179Z,1528865427.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:27.558Z,1528865427.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:27.576Z,1528865427.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:27.954Z,1528865427.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:27.976Z,1528865427.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:28.354Z,1528865428.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:28.372Z,1528865428.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:28.752Z,1528865428.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:28.776Z,1528865428.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:29.152Z,1528865429.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:29.170Z,1528865429.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:29.547Z,1528865429.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:29.589Z,1528865429.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:29.947Z,1528865429.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:29.970Z,1528865429.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:30.361Z,1528865430.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:30.379Z,1528865430.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:30.761Z,1528865430.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:30.779Z,1528865430.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:31.158Z,1528865431.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:31.176Z,1528865431.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:31.553Z,1528865431.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:31.570Z,1528865431.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:31.951Z,1528865431.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:31.984Z,1528865431.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:32.349Z,1528865432.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:32.372Z,1528865432.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:32.746Z,1528865432.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:32.776Z,1528865432.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:33.166Z,1528865433.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:33.184Z,1528865433.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:33.562Z,1528865433.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:33.580Z,1528865433.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:33.962Z,1528865433.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:33.981Z,1528865433.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:34.354Z,1528865434.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:34.373Z,1528865434.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:34.747Z,1528865434.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:34.771Z,1528865434.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:35.151Z,1528865435.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:35.175Z,1528865435.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:35.551Z,1528865435.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:35.584Z,1528865435.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:35.943Z,1528865435.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:35.983Z,1528865435.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:36.364Z,1528865436.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:36.385Z,1528865436.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:36.766Z,1528865436.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:36.785Z,1528865436.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:37.160Z,1528865437.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:37.185Z,1528865437.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:37.543Z,1528865437.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:37.579Z,1528865437.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:37.954Z,1528865437.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:37.972Z,1528865437.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:38.343Z,1528865438.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:38.379Z,1528865438.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:38.747Z,1528865438.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:38.783Z,1528865438.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:39.162Z,1528865439.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:39.192Z,1528865439.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:39.562Z,1528865439.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:39.580Z,1528865439.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:39.964Z,1528865439.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:39.984Z,1528865439.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:40.347Z,1528865440.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:40.384Z,1528865440.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:40.743Z,1528865440.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:40.780Z,1528865440.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:41.147Z,1528865441.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:41.177Z,1528865441.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:41.548Z,1528865441.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:41.577Z,1528865441.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:41.948Z,1528865441.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:41.980Z,1528865441.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:42.364Z,1528865442.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:42.382Z,1528865442.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:42.762Z,1528865442.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:42.795Z,1528865442.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:43.157Z,1528865443.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:43.181Z,1528865443.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:43.547Z,1528865443.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:43.581Z,1528865443.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:43.947Z,1528865443.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:43.980Z,1528865443.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:44.352Z,1528865444.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:44.379Z,1528865444.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:44.746Z,1528865444.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:44.785Z,1528865444.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:45.165Z,1528865445.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:45.183Z,1528865445.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:45.564Z,1528865445.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:45.582Z,1528865445.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:45.962Z,1528865445.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:45.988Z,1528865445.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:46.348Z,1528865446.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:46.378Z,1528865446.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:46.748Z,1528865446.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:46.782Z,1528865446.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:47.147Z,1528865447.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:47.181Z,1528865447.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:47.547Z,1528865447.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:47.566Z,1528865447.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:47.947Z,1528865447.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:47.965Z,1528865447.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:48.361Z,1528865448.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:48.400Z,1528865448.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:48.765Z,1528865448.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:48.796Z,1528865448.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:49.157Z,1528865449.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:49.191Z,1528865449.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:49.550Z,1528865449.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:49.568Z,1528865449.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:49.946Z,1528865449.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:49.968Z,1528865449.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:50.346Z,1528865450.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:50.364Z,1528865450.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:50.750Z,1528865450.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:50.768Z,1528865450.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:51.161Z,1528865451.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:51.199Z,1528865451.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:51.561Z,1528865451.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:51.579Z,1528865451.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:51.961Z,1528865451.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:51.979Z,1528865451.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:52.350Z,1528865452.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:52.372Z,1528865452.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:52.747Z,1528865452.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:52.770Z,1528865452.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:53.151Z,1528865453.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:53.176Z,1528865453.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:53.554Z,1528865453.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:53.571Z,1528865453.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:53.947Z,1528865453.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:53.970Z,1528865453.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:54.357Z,1528865454.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:54.375Z,1528865454.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:54.761Z,1528865454.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:54.778Z,1528865454.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:55.154Z,1528865455.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:55.176Z,1528865455.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:55.552Z,1528865455.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:55.570Z,1528865455.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:55.952Z,1528865455.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:55.969Z,1528865455.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:56.350Z,1528865456.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:56.368Z,1528865456.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:56.752Z,1528865456.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:56.769Z,1528865456.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:57.157Z,1528865457.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:57.175Z,1528865457.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:57.561Z,1528865457.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:57.580Z,1528865457.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:57.957Z,1528865457.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:57.975Z,1528865457.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:58.354Z,1528865458.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:58.371Z,1528865458.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:58.747Z,1528865458.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:58.769Z,1528865458.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:59.152Z,1528865459.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:59.169Z,1528865459.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:59.550Z,1528865459.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:59.567Z,1528865459.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:50:59.951Z,1528865459.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:50:59.968Z,1528865459.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:00.337Z,1528865460.337 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T04:51:00.337Z,1528865460.337 [NAL9602] Data Fault, FailCount= 3
2018-06-13T04:51:00.337Z,1528865460.337 [NAL9602](ERROR): Data Fault
2018-06-13T04:51:00.355Z,1528865460.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:00.373Z,1528865460.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:00.376Z,1528865460.376 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T04:51:00.376Z,1528865460.376 [Default:CheckIn:C.Wait] Stopped
2018-06-13T04:51:00.376Z,1528865460.376 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T04:51:00.376Z,1528865460.376 [Default:CheckIn:D] Running Loop=1
2018-06-13T04:51:00.453Z,1528865460.453 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T04:51:00.730Z,1528865460.730 [NAL9602](INFO): Powering down
2018-06-13T04:51:00.755Z,1528865460.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:00.795Z,1528865460.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:00.806Z,1528865460.806 [Default:CheckIn:D] Stopped
2018-06-13T04:51:00.806Z,1528865460.806 [Default:CheckIn:E] Running Loop=1
2018-06-13T04:51:03.862Z,1528865463.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:03.881Z,1528865463.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:03.884Z,1528865463.884 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 83.789339 min 
2018-06-13T04:51:03.884Z,1528865463.884 [Default:CheckIn:E] Stopped
2018-06-13T04:51:03.884Z,1528865463.884 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T04:51:03.884Z,1528865463.884 [Default:CheckIn] Stopped
2018-06-13T04:51:03.885Z,1528865463.885 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T04:51:03.885Z,1528865463.885 [Default:CheckIn](INFO): Running loop #9
2018-06-13T04:51:03.885Z,1528865463.885 [Default:CheckIn] Running Loop=9
2018-06-13T04:51:03.885Z,1528865463.885 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T04:51:03.885Z,1528865463.885 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T04:51:03.985Z,1528865463.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:04.032Z,1528865464.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:04.119Z,1528865464.119 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T04:51:04.119Z,1528865464.119 [NAL9602] No Fault, FailCount= 3
2018-06-13T04:51:04.390Z,1528865464.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:04.424Z,1528865464.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:04.797Z,1528865464.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:04.815Z,1528865464.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:05.185Z,1528865465.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:05.218Z,1528865465.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:05.588Z,1528865465.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:05.606Z,1528865465.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:05.992Z,1528865465.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:06.010Z,1528865466.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:06.391Z,1528865466.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:06.421Z,1528865466.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:06.782Z,1528865466.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:06.810Z,1528865466.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:07.192Z,1528865467.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:07.211Z,1528865467.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:07.590Z,1528865467.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:07.614Z,1528865467.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:07.982Z,1528865467.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:08.010Z,1528865468.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:08.392Z,1528865468.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:08.410Z,1528865468.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:08.790Z,1528865468.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:08.814Z,1528865468.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:09.193Z,1528865469.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:09.211Z,1528865469.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:09.592Z,1528865469.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:09.616Z,1528865469.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:09.982Z,1528865469.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:10.021Z,1528865470.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:10.382Z,1528865470.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:10.419Z,1528865470.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:10.786Z,1528865470.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:10.814Z,1528865470.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:11.187Z,1528865471.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:11.215Z,1528865471.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:11.582Z,1528865471.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:11.620Z,1528865471.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:11.987Z,1528865471.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:12.024Z,1528865472.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:12.386Z,1528865472.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:12.423Z,1528865472.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:12.782Z,1528865472.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:12.820Z,1528865472.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:13.187Z,1528865473.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:13.220Z,1528865473.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:13.586Z,1528865473.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:13.604Z,1528865473.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:13.983Z,1528865473.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:14.008Z,1528865474.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:14.387Z,1528865474.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:14.404Z,1528865474.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:14.787Z,1528865474.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:14.823Z,1528865474.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:15.186Z,1528865475.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:15.203Z,1528865475.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:15.590Z,1528865475.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:15.608Z,1528865475.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:15.991Z,1528865475.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:16.009Z,1528865476.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:16.390Z,1528865476.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:16.407Z,1528865476.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:16.791Z,1528865476.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:16.808Z,1528865476.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:17.190Z,1528865477.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:17.208Z,1528865477.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:17.585Z,1528865477.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:17.603Z,1528865477.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:17.990Z,1528865477.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:18.009Z,1528865478.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:18.390Z,1528865478.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:18.408Z,1528865478.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:18.785Z,1528865478.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:18.803Z,1528865478.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:19.190Z,1528865479.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:19.208Z,1528865479.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:19.590Z,1528865479.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:19.607Z,1528865479.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:19.985Z,1528865479.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:20.002Z,1528865480.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:20.390Z,1528865480.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:20.408Z,1528865480.408 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:20.408Z,1528865480.408 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2018-06-13T04:51:20.408Z,1528865480.408 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:51:20.410Z,1528865480.410 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:20.410Z,1528865480.410 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29
2018-06-13T04:51:20.410Z,1528865480.410 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:51:20.411Z,1528865480.411 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:20.412Z,1528865480.412 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2018-06-13T04:51:20.412Z,1528865480.412 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:51:20.501Z,1528865480.501 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:51:20.501Z,1528865480.501 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:51:20.502Z,1528865480.502 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:51:20.790Z,1528865480.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:20.901Z,1528865480.901 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:51:20.901Z,1528865480.901 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2018-06-13T04:51:20.902Z,1528865480.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:51:20.902Z,1528865480.902 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29
2018-06-13T04:51:20.902Z,1528865480.902 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:51:20.902Z,1528865480.902 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2018-06-13T04:51:21.188Z,1528865481.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:21.211Z,1528865481.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:51:21.211Z,1528865481.211 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:51:21.211Z,1528865481.211 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:51:21.212Z,1528865481.212 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:51:21.212Z,1528865481.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:51:21.212Z,1528865481.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:51:21.213Z,1528865481.213 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:51:21.213Z,1528865481.213 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:51:21.214Z,1528865481.214 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:51:21.582Z,1528865481.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:21.619Z,1528865481.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:51:21.619Z,1528865481.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:21.985Z,1528865481.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:22.020Z,1528865482.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:51:22.021Z,1528865482.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:22.386Z,1528865482.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:22.413Z,1528865482.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:51:22.414Z,1528865482.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:22.787Z,1528865482.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:22.814Z,1528865482.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:51:22.815Z,1528865482.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:23.187Z,1528865483.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:23.213Z,1528865483.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:51:23.214Z,1528865483.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:23.582Z,1528865483.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:23.619Z,1528865483.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:51:23.620Z,1528865483.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:23.987Z,1528865483.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:24.020Z,1528865484.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:51:24.021Z,1528865484.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:24.386Z,1528865484.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:24.416Z,1528865484.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:51:24.421Z,1528865484.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:24.782Z,1528865484.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:24.811Z,1528865484.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:51:24.812Z,1528865484.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:25.186Z,1528865485.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:25.223Z,1528865485.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:51:25.224Z,1528865485.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:25.587Z,1528865485.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:25.621Z,1528865485.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:51:25.622Z,1528865485.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:25.982Z,1528865485.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:25.999Z,1528865485.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:51:26.000Z,1528865486.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:26.387Z,1528865486.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:26.427Z,1528865486.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:51:26.428Z,1528865486.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:26.786Z,1528865486.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:26.804Z,1528865486.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:51:26.821Z,1528865486.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:27.190Z,1528865487.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:27.207Z,1528865487.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:51:27.208Z,1528865487.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:27.583Z,1528865487.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:27.602Z,1528865487.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:51:27.603Z,1528865487.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:27.987Z,1528865487.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:28.005Z,1528865488.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:51:28.006Z,1528865488.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:28.387Z,1528865488.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:28.404Z,1528865488.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:51:28.405Z,1528865488.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:28.791Z,1528865488.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:28.809Z,1528865488.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:51:28.810Z,1528865488.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:29.190Z,1528865489.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:29.208Z,1528865489.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:51:29.209Z,1528865489.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:29.590Z,1528865489.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:29.608Z,1528865489.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:51:29.609Z,1528865489.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:29.985Z,1528865489.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:30.003Z,1528865490.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:51:30.004Z,1528865490.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:30.390Z,1528865490.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:30.408Z,1528865490.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:51:30.409Z,1528865490.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:30.773Z,1528865490.773 [NAL9602](INFO): Powering up NAL9602
2018-06-13T04:51:30.790Z,1528865490.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:30.815Z,1528865490.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:51:30.816Z,1528865490.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:31.188Z,1528865491.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:31.206Z,1528865491.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:51:31.207Z,1528865491.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:31.590Z,1528865491.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:31.608Z,1528865491.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:51:31.609Z,1528865491.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:31.991Z,1528865491.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:32.008Z,1528865492.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:51:32.010Z,1528865492.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:32.393Z,1528865492.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:32.411Z,1528865492.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:51:32.412Z,1528865492.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:32.792Z,1528865492.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:32.810Z,1528865492.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:51:32.811Z,1528865492.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:33.188Z,1528865493.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:33.206Z,1528865493.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:51:33.206Z,1528865493.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:33.588Z,1528865493.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:33.606Z,1528865493.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:51:33.607Z,1528865493.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:33.992Z,1528865493.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:34.010Z,1528865494.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:51:34.011Z,1528865494.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:34.392Z,1528865494.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:34.410Z,1528865494.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:51:34.411Z,1528865494.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:34.792Z,1528865494.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:34.810Z,1528865494.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:51:34.811Z,1528865494.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:35.192Z,1528865495.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:35.210Z,1528865495.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:51:35.211Z,1528865495.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:35.588Z,1528865495.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:35.605Z,1528865495.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:51:35.606Z,1528865495.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:35.988Z,1528865495.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:36.005Z,1528865496.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:51:36.006Z,1528865496.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:36.393Z,1528865496.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:36.411Z,1528865496.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:51:36.412Z,1528865496.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:36.792Z,1528865496.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:36.809Z,1528865496.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:51:36.810Z,1528865496.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:37.189Z,1528865497.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:37.206Z,1528865497.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:51:37.207Z,1528865497.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:37.587Z,1528865497.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:37.608Z,1528865497.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:51:37.613Z,1528865497.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:37.983Z,1528865497.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:38.031Z,1528865498.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:51:38.032Z,1528865498.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:38.383Z,1528865498.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:38.412Z,1528865498.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:51:38.412Z,1528865498.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:38.787Z,1528865498.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:38.808Z,1528865498.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:51:38.813Z,1528865498.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:39.182Z,1528865499.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:39.220Z,1528865499.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:51:39.221Z,1528865499.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:39.583Z,1528865499.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:39.604Z,1528865499.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:51:39.609Z,1528865499.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:39.987Z,1528865499.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:40.016Z,1528865500.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:51:40.021Z,1528865500.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:40.392Z,1528865500.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:40.416Z,1528865500.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:40.792Z,1528865500.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:40.810Z,1528865500.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:41.192Z,1528865501.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:41.210Z,1528865501.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:41.602Z,1528865501.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:41.619Z,1528865501.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:41.970Z,1528865501.970 [NAL9602](INFO): NAL9602 initialized
2018-06-13T04:51:41.998Z,1528865501.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:42.016Z,1528865502.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:42.393Z,1528865502.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:42.410Z,1528865502.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:42.803Z,1528865502.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:42.821Z,1528865502.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:43.202Z,1528865503.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:43.224Z,1528865503.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:43.603Z,1528865503.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:43.621Z,1528865503.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:43.994Z,1528865503.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:44.018Z,1528865504.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:44.383Z,1528865504.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:44.419Z,1528865504.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:44.791Z,1528865504.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:44.825Z,1528865504.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:45.187Z,1528865505.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:45.228Z,1528865505.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:45.603Z,1528865505.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:45.621Z,1528865505.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:46.007Z,1528865506.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:46.032Z,1528865506.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:46.408Z,1528865506.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:46.426Z,1528865506.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:46.784Z,1528865506.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:46.819Z,1528865506.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:47.187Z,1528865507.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:47.223Z,1528865507.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:47.583Z,1528865507.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:47.620Z,1528865507.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:47.984Z,1528865507.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:48.019Z,1528865508.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:48.387Z,1528865508.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:48.423Z,1528865508.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:48.808Z,1528865508.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:48.826Z,1528865508.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:49.203Z,1528865509.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:49.221Z,1528865509.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:49.606Z,1528865509.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:49.632Z,1528865509.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:49.987Z,1528865509.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:50.021Z,1528865510.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:50.387Z,1528865510.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:50.414Z,1528865510.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:50.788Z,1528865510.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:50.826Z,1528865510.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:51.187Z,1528865511.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:51.221Z,1528865511.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:51.605Z,1528865511.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:51.623Z,1528865511.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:52.006Z,1528865512.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:52.023Z,1528865512.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:52.406Z,1528865512.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:52.432Z,1528865512.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:52.787Z,1528865512.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:52.824Z,1528865512.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:53.187Z,1528865513.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:53.225Z,1528865513.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:53.588Z,1528865513.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:53.623Z,1528865513.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:53.992Z,1528865513.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:54.026Z,1528865514.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:54.387Z,1528865514.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:54.405Z,1528865514.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:54.805Z,1528865514.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:54.836Z,1528865514.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:55.197Z,1528865515.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:55.235Z,1528865515.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:55.602Z,1528865515.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:55.643Z,1528865515.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:55.992Z,1528865515.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:56.010Z,1528865516.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:56.391Z,1528865516.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:56.409Z,1528865516.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:56.790Z,1528865516.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:56.816Z,1528865516.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:57.190Z,1528865517.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:57.209Z,1528865517.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:57.598Z,1528865517.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:57.617Z,1528865517.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:58.001Z,1528865518.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:58.040Z,1528865518.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:58.405Z,1528865518.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:58.448Z,1528865518.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:58.793Z,1528865518.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:58.810Z,1528865518.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:59.191Z,1528865519.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:59.213Z,1528865519.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:59.591Z,1528865519.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:51:59.623Z,1528865519.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:51:59.994Z,1528865519.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:00.012Z,1528865520.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:00.394Z,1528865520.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:00.411Z,1528865520.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:00.805Z,1528865520.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:00.823Z,1528865520.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:03.918Z,1528865523.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:03.957Z,1528865523.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:04.097Z,1528865524.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:04.133Z,1528865524.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:04.476Z,1528865524.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:04.508Z,1528865524.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:04.872Z,1528865524.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:04.903Z,1528865524.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:05.271Z,1528865525.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:05.305Z,1528865525.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:05.683Z,1528865525.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:05.722Z,1528865525.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:06.081Z,1528865526.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:06.116Z,1528865526.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:06.485Z,1528865526.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:06.519Z,1528865526.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:06.875Z,1528865526.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:06.894Z,1528865526.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:07.274Z,1528865527.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:07.292Z,1528865527.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:07.674Z,1528865527.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:07.693Z,1528865527.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:08.074Z,1528865528.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:08.092Z,1528865528.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:08.485Z,1528865528.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:08.520Z,1528865528.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:08.885Z,1528865528.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:08.903Z,1528865528.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:09.285Z,1528865529.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:09.303Z,1528865529.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:09.676Z,1528865529.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:09.694Z,1528865529.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:10.070Z,1528865530.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:10.100Z,1528865530.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:10.485Z,1528865530.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:10.504Z,1528865530.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:10.881Z,1528865530.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:10.899Z,1528865530.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:11.281Z,1528865531.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:11.299Z,1528865531.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:11.678Z,1528865531.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:11.696Z,1528865531.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:12.077Z,1528865532.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:12.095Z,1528865532.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:12.482Z,1528865532.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:12.500Z,1528865532.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:12.885Z,1528865532.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:12.903Z,1528865532.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:13.279Z,1528865533.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:13.297Z,1528865533.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:13.679Z,1528865533.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:13.696Z,1528865533.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:14.078Z,1528865534.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:14.096Z,1528865534.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:14.482Z,1528865534.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:14.500Z,1528865534.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:14.885Z,1528865534.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:14.903Z,1528865534.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:15.289Z,1528865535.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:15.307Z,1528865535.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:15.678Z,1528865535.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:15.696Z,1528865535.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:16.075Z,1528865536.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:16.111Z,1528865536.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:16.486Z,1528865536.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:16.504Z,1528865536.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:16.886Z,1528865536.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:16.904Z,1528865536.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:17.283Z,1528865537.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:17.308Z,1528865537.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:17.679Z,1528865537.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:17.697Z,1528865537.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:18.071Z,1528865538.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:18.103Z,1528865538.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:18.482Z,1528865538.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:18.505Z,1528865538.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:18.885Z,1528865538.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:18.903Z,1528865538.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:19.282Z,1528865539.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:19.308Z,1528865539.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:19.675Z,1528865539.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:19.706Z,1528865539.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:20.075Z,1528865540.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:20.105Z,1528865540.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:20.482Z,1528865540.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:20.504Z,1528865540.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:20.885Z,1528865540.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:20.903Z,1528865540.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:21.285Z,1528865541.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:21.304Z,1528865541.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:21.677Z,1528865541.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:21.695Z,1528865541.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:22.075Z,1528865542.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:22.106Z,1528865542.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:22.485Z,1528865542.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:22.503Z,1528865542.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:22.882Z,1528865542.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:22.904Z,1528865542.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:23.282Z,1528865543.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:23.304Z,1528865543.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:23.679Z,1528865543.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:23.697Z,1528865543.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:24.073Z,1528865544.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:24.096Z,1528865544.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:24.482Z,1528865544.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:24.504Z,1528865544.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:24.885Z,1528865544.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:24.903Z,1528865544.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:25.285Z,1528865545.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:25.303Z,1528865545.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:25.680Z,1528865545.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:25.698Z,1528865545.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:26.075Z,1528865546.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:26.110Z,1528865546.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:26.486Z,1528865546.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:26.504Z,1528865546.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:26.889Z,1528865546.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:26.907Z,1528865546.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:27.287Z,1528865547.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:27.305Z,1528865547.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:27.677Z,1528865547.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:27.695Z,1528865547.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:28.075Z,1528865548.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:28.097Z,1528865548.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:28.487Z,1528865548.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:28.512Z,1528865548.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:28.887Z,1528865548.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:28.912Z,1528865548.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:29.286Z,1528865549.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:29.304Z,1528865549.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:29.675Z,1528865549.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:29.700Z,1528865549.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:30.071Z,1528865550.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:30.095Z,1528865550.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:30.475Z,1528865550.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:30.498Z,1528865550.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:30.887Z,1528865550.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:30.912Z,1528865550.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:31.286Z,1528865551.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:31.308Z,1528865551.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:31.686Z,1528865551.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:31.704Z,1528865551.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:32.075Z,1528865552.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:32.100Z,1528865552.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:32.471Z,1528865552.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:32.494Z,1528865552.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:32.878Z,1528865552.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:32.895Z,1528865552.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:33.275Z,1528865553.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:33.299Z,1528865553.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:33.687Z,1528865553.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:33.712Z,1528865553.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:34.086Z,1528865554.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:34.108Z,1528865554.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:34.487Z,1528865554.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:34.505Z,1528865554.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:34.873Z,1528865554.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:34.891Z,1528865554.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:35.275Z,1528865555.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:35.297Z,1528865555.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:35.678Z,1528865555.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:35.697Z,1528865555.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:36.077Z,1528865556.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:36.095Z,1528865556.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:36.474Z,1528865556.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:36.492Z,1528865556.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:36.887Z,1528865556.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:36.912Z,1528865556.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:37.286Z,1528865557.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:37.304Z,1528865557.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:37.686Z,1528865557.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:37.704Z,1528865557.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:38.078Z,1528865558.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:38.096Z,1528865558.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:38.478Z,1528865558.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:38.496Z,1528865558.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:38.875Z,1528865558.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:38.899Z,1528865558.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:39.275Z,1528865559.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:39.300Z,1528865559.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:39.683Z,1528865559.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:39.701Z,1528865559.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:40.086Z,1528865560.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:40.108Z,1528865560.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:40.488Z,1528865560.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:40.512Z,1528865560.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:40.881Z,1528865560.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:40.904Z,1528865560.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:41.275Z,1528865561.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:41.299Z,1528865561.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:41.678Z,1528865561.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:41.696Z,1528865561.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:42.072Z,1528865562.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:42.098Z,1528865562.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:42.475Z,1528865562.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:42.499Z,1528865562.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:42.888Z,1528865562.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:42.906Z,1528865562.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:43.287Z,1528865563.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:43.305Z,1528865563.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:43.686Z,1528865563.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:43.704Z,1528865563.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:44.078Z,1528865564.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:44.096Z,1528865564.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:44.471Z,1528865564.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:44.494Z,1528865564.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:44.877Z,1528865564.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:44.896Z,1528865564.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:45.279Z,1528865565.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:45.298Z,1528865565.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:45.686Z,1528865565.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:45.705Z,1528865565.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:46.086Z,1528865566.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:46.108Z,1528865566.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:46.486Z,1528865566.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:46.504Z,1528865566.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:46.871Z,1528865566.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:46.894Z,1528865566.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:47.277Z,1528865567.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:47.295Z,1528865567.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:47.678Z,1528865567.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:47.696Z,1528865567.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:48.082Z,1528865568.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:48.100Z,1528865568.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:48.475Z,1528865568.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:48.497Z,1528865568.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:48.887Z,1528865568.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:48.905Z,1528865568.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:49.287Z,1528865569.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:49.312Z,1528865569.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:49.688Z,1528865569.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:49.712Z,1528865569.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:50.078Z,1528865570.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:50.102Z,1528865570.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:50.471Z,1528865570.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:50.494Z,1528865570.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:50.875Z,1528865570.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:50.900Z,1528865570.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:51.275Z,1528865571.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:51.300Z,1528865571.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:51.687Z,1528865571.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:51.705Z,1528865571.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:52.087Z,1528865572.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:52.112Z,1528865572.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:52.488Z,1528865572.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:52.506Z,1528865572.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:52.872Z,1528865572.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:52.898Z,1528865572.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:53.278Z,1528865573.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:53.296Z,1528865573.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:53.678Z,1528865573.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:53.709Z,1528865573.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:54.071Z,1528865574.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:54.096Z,1528865574.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:54.476Z,1528865574.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:54.495Z,1528865574.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:54.892Z,1528865574.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:54.910Z,1528865574.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:55.288Z,1528865575.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:55.312Z,1528865575.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:55.688Z,1528865575.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:55.706Z,1528865575.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:56.077Z,1528865576.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:56.096Z,1528865576.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:56.476Z,1528865576.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:56.495Z,1528865576.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:56.878Z,1528865576.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:56.896Z,1528865576.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:57.267Z,1528865577.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:57.303Z,1528865577.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:57.684Z,1528865577.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:57.702Z,1528865577.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:58.090Z,1528865578.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:58.107Z,1528865578.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:58.491Z,1528865578.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:58.512Z,1528865578.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:58.867Z,1528865578.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:58.903Z,1528865578.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:59.275Z,1528865579.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:59.298Z,1528865579.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:52:59.667Z,1528865579.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:52:59.696Z,1528865579.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:00.078Z,1528865580.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:00.095Z,1528865580.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:00.481Z,1528865580.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:00.499Z,1528865580.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:00.890Z,1528865580.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:00.916Z,1528865580.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:04.009Z,1528865584.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:04.035Z,1528865584.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:04.157Z,1528865584.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:04.187Z,1528865584.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:04.547Z,1528865584.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:04.565Z,1528865584.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:04.947Z,1528865584.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:04.966Z,1528865584.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:05.346Z,1528865585.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:05.364Z,1528865585.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:05.757Z,1528865585.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:05.799Z,1528865585.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:06.153Z,1528865586.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:06.171Z,1528865586.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:06.557Z,1528865586.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:06.575Z,1528865586.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:06.946Z,1528865586.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:06.963Z,1528865586.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:07.346Z,1528865587.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:07.363Z,1528865587.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:07.748Z,1528865587.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:07.772Z,1528865587.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:08.149Z,1528865588.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:08.172Z,1528865588.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:08.550Z,1528865588.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:08.572Z,1528865588.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:08.957Z,1528865588.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:08.975Z,1528865588.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:09.353Z,1528865589.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:09.376Z,1528865589.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:09.748Z,1528865589.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:09.767Z,1528865589.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:10.148Z,1528865590.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:10.172Z,1528865590.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:10.561Z,1528865590.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:10.579Z,1528865590.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:10.953Z,1528865590.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:10.971Z,1528865590.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:11.354Z,1528865591.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:11.371Z,1528865591.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:11.750Z,1528865591.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:11.767Z,1528865591.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:12.143Z,1528865592.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:12.165Z,1528865592.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:12.554Z,1528865592.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:12.572Z,1528865592.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:12.957Z,1528865592.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:12.974Z,1528865592.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:13.354Z,1528865593.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:13.371Z,1528865593.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:13.748Z,1528865593.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:13.768Z,1528865593.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:14.146Z,1528865594.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:14.168Z,1528865594.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:14.554Z,1528865594.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:14.572Z,1528865594.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:14.957Z,1528865594.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:14.975Z,1528865594.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:15.357Z,1528865595.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:15.374Z,1528865595.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:15.748Z,1528865595.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:15.766Z,1528865595.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:16.148Z,1528865596.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:16.168Z,1528865596.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:16.545Z,1528865596.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:16.563Z,1528865596.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:16.954Z,1528865596.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:16.972Z,1528865596.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:17.357Z,1528865597.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:17.375Z,1528865597.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:17.755Z,1528865597.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:17.776Z,1528865597.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:18.150Z,1528865598.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:18.167Z,1528865598.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:18.547Z,1528865598.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:18.569Z,1528865598.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:18.946Z,1528865598.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:18.964Z,1528865598.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:19.349Z,1528865599.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:19.368Z,1528865599.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:19.754Z,1528865599.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:19.772Z,1528865599.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:20.157Z,1528865600.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:20.174Z,1528865600.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:20.554Z,1528865600.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:20.572Z,1528865600.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:20.947Z,1528865600.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:20.969Z,1528865600.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:21.346Z,1528865601.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:21.365Z,1528865601.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:21.749Z,1528865601.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:21.767Z,1528865601.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:22.148Z,1528865602.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:22.179Z,1528865602.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:22.549Z,1528865602.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:22.567Z,1528865602.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:22.957Z,1528865602.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:22.975Z,1528865602.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:23.356Z,1528865603.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:23.380Z,1528865603.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:23.759Z,1528865603.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:23.776Z,1528865603.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:24.150Z,1528865604.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:24.168Z,1528865604.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:24.547Z,1528865604.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:24.570Z,1528865604.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:24.948Z,1528865604.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:24.977Z,1528865604.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:25.349Z,1528865605.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:25.367Z,1528865605.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:25.759Z,1528865605.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:25.777Z,1528865605.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:26.159Z,1528865606.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:26.184Z,1528865606.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:26.559Z,1528865606.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:26.577Z,1528865606.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:26.954Z,1528865606.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:26.972Z,1528865606.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:27.347Z,1528865607.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:27.372Z,1528865607.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:27.750Z,1528865607.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:27.768Z,1528865607.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:28.155Z,1528865608.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:28.173Z,1528865608.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:28.547Z,1528865608.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:28.572Z,1528865608.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:28.960Z,1528865608.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:28.978Z,1528865608.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:29.358Z,1528865609.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:29.380Z,1528865609.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:29.759Z,1528865609.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:29.777Z,1528865609.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:30.149Z,1528865610.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:30.167Z,1528865610.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:30.547Z,1528865610.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:30.570Z,1528865610.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:30.948Z,1528865610.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:30.986Z,1528865610.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:31.343Z,1528865611.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:31.382Z,1528865611.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:31.764Z,1528865611.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:31.783Z,1528865611.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:32.164Z,1528865612.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:32.182Z,1528865612.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:32.554Z,1528865612.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:32.585Z,1528865612.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:32.943Z,1528865612.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:32.969Z,1528865612.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:33.343Z,1528865613.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:33.385Z,1528865613.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:33.744Z,1528865613.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:33.762Z,1528865613.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:34.148Z,1528865614.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:34.165Z,1528865614.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:34.548Z,1528865614.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:34.565Z,1528865614.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:34.957Z,1528865614.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:34.991Z,1528865614.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:35.357Z,1528865615.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:35.375Z,1528865615.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:35.758Z,1528865615.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:35.776Z,1528865615.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:36.148Z,1528865616.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:36.166Z,1528865616.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:36.549Z,1528865616.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:36.567Z,1528865616.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:36.948Z,1528865616.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:36.988Z,1528865616.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:37.344Z,1528865617.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:37.375Z,1528865617.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:37.757Z,1528865617.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:37.776Z,1528865617.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:38.165Z,1528865618.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:38.199Z,1528865618.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:38.551Z,1528865618.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:38.581Z,1528865618.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:38.949Z,1528865618.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:38.967Z,1528865618.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:39.350Z,1528865619.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:39.378Z,1528865619.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:39.746Z,1528865619.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:39.763Z,1528865619.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:40.148Z,1528865620.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:40.167Z,1528865620.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:40.547Z,1528865620.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:40.582Z,1528865620.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:40.954Z,1528865620.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:40.980Z,1528865620.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:41.360Z,1528865621.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:41.379Z,1528865621.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:41.758Z,1528865621.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:41.776Z,1528865621.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:42.142Z,1528865622.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:42.172Z,1528865622.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:42.547Z,1528865622.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:42.570Z,1528865622.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:42.948Z,1528865622.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:42.979Z,1528865622.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:43.339Z,1528865623.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:43.375Z,1528865623.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:43.759Z,1528865623.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:43.784Z,1528865623.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:44.163Z,1528865624.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:44.188Z,1528865624.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:44.555Z,1528865624.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:44.573Z,1528865624.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:44.949Z,1528865624.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:44.967Z,1528865624.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:45.351Z,1528865625.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:45.374Z,1528865625.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:45.749Z,1528865625.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:45.767Z,1528865625.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:46.139Z,1528865626.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:46.174Z,1528865626.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:46.543Z,1528865626.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:46.578Z,1528865626.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:46.959Z,1528865626.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:46.977Z,1528865626.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:47.364Z,1528865627.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:47.382Z,1528865627.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:47.762Z,1528865627.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:47.788Z,1528865627.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:48.147Z,1528865628.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:48.181Z,1528865628.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:48.543Z,1528865628.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:48.561Z,1528865628.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:48.944Z,1528865628.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:48.980Z,1528865628.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:49.342Z,1528865629.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:49.360Z,1528865629.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:49.757Z,1528865629.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:49.791Z,1528865629.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:50.157Z,1528865630.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:50.175Z,1528865630.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:50.554Z,1528865630.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:50.571Z,1528865630.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:50.948Z,1528865630.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:50.966Z,1528865630.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:51.349Z,1528865631.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:51.368Z,1528865631.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:51.749Z,1528865631.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:51.767Z,1528865631.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:52.148Z,1528865632.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:52.168Z,1528865632.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:52.548Z,1528865632.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:52.574Z,1528865632.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:52.954Z,1528865632.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:52.980Z,1528865632.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:53.357Z,1528865633.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:53.375Z,1528865633.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:53.758Z,1528865633.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:53.776Z,1528865633.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:54.143Z,1528865634.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:54.166Z,1528865634.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:54.547Z,1528865634.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:54.569Z,1528865634.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:54.948Z,1528865634.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:54.965Z,1528865634.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:55.342Z,1528865635.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:55.372Z,1528865635.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:55.759Z,1528865635.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:55.776Z,1528865635.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:56.163Z,1528865636.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:56.181Z,1528865636.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:56.555Z,1528865636.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:56.573Z,1528865636.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:56.948Z,1528865636.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:56.971Z,1528865636.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:57.350Z,1528865637.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:57.372Z,1528865637.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:57.749Z,1528865637.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:57.767Z,1528865637.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:58.154Z,1528865638.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:58.176Z,1528865638.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:58.547Z,1528865638.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:58.581Z,1528865638.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:58.955Z,1528865638.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:58.974Z,1528865638.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:59.363Z,1528865639.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:59.381Z,1528865639.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:53:59.768Z,1528865639.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:53:59.786Z,1528865639.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:00.139Z,1528865640.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:00.166Z,1528865640.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:00.553Z,1528865640.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:00.571Z,1528865640.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:00.955Z,1528865640.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:00.973Z,1528865640.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:04.135Z,1528865644.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:04.166Z,1528865644.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:04.308Z,1528865644.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:04.361Z,1528865644.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:04.708Z,1528865644.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:04.726Z,1528865644.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:05.103Z,1528865645.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:05.121Z,1528865645.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:05.483Z,1528865645.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:05.525Z,1528865645.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:05.884Z,1528865645.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:05.918Z,1528865645.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:06.280Z,1528865646.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:06.298Z,1528865646.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:06.693Z,1528865646.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:06.731Z,1528865646.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:07.097Z,1528865647.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:07.126Z,1528865647.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:07.493Z,1528865647.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:07.527Z,1528865647.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:07.884Z,1528865647.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:07.901Z,1528865647.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:08.286Z,1528865648.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:08.317Z,1528865648.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:08.693Z,1528865648.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:08.727Z,1528865648.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:09.097Z,1528865649.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:09.131Z,1528865649.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:09.497Z,1528865649.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:09.515Z,1528865649.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:09.889Z,1528865649.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:09.907Z,1528865649.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:10.288Z,1528865650.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:10.307Z,1528865650.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:10.697Z,1528865650.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:10.715Z,1528865650.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:11.097Z,1528865651.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:11.115Z,1528865651.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:11.494Z,1528865651.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:11.511Z,1528865651.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:11.889Z,1528865651.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:11.907Z,1528865651.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:12.287Z,1528865652.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:12.312Z,1528865652.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:12.690Z,1528865652.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:12.712Z,1528865652.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:13.097Z,1528865653.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:13.116Z,1528865653.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:13.490Z,1528865653.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:13.512Z,1528865653.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:13.888Z,1528865653.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:13.916Z,1528865653.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:14.290Z,1528865654.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:14.308Z,1528865654.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:14.694Z,1528865654.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:14.716Z,1528865654.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:15.098Z,1528865655.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:15.116Z,1528865655.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:15.497Z,1528865655.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:15.515Z,1528865655.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:15.882Z,1528865655.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:15.912Z,1528865655.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:16.287Z,1528865656.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:16.309Z,1528865656.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:16.699Z,1528865656.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:16.717Z,1528865656.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:17.098Z,1528865657.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:17.121Z,1528865657.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:17.495Z,1528865657.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:17.513Z,1528865657.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:17.888Z,1528865657.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:17.919Z,1528865657.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:18.279Z,1528865658.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:18.315Z,1528865658.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:18.699Z,1528865658.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:18.717Z,1528865658.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:19.100Z,1528865659.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:19.118Z,1528865659.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:19.499Z,1528865659.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:19.517Z,1528865659.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:19.890Z,1528865659.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:19.908Z,1528865659.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:20.290Z,1528865660.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:20.312Z,1528865660.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:20.700Z,1528865660.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:20.718Z,1528865660.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:21.103Z,1528865661.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:21.120Z,1528865661.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:21.504Z,1528865661.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:21.522Z,1528865661.522 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:21.522Z,1528865661.522 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2018-06-13T04:54:21.522Z,1528865661.522 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:54:21.524Z,1528865661.524 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:21.524Z,1528865661.524 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30
2018-06-13T04:54:21.524Z,1528865661.524 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:54:21.526Z,1528865661.526 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:21.526Z,1528865661.526 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2018-06-13T04:54:21.526Z,1528865661.526 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:54:21.617Z,1528865661.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:54:21.617Z,1528865661.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:54:21.617Z,1528865661.617 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:54:21.884Z,1528865661.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:21.997Z,1528865661.997 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:54:21.997Z,1528865661.997 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2018-06-13T04:54:21.998Z,1528865661.998 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:54:21.998Z,1528865661.998 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30
2018-06-13T04:54:21.998Z,1528865661.998 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:54:21.998Z,1528865661.998 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2018-06-13T04:54:22.279Z,1528865662.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:22.314Z,1528865662.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:54:22.315Z,1528865662.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:54:22.315Z,1528865662.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:54:22.315Z,1528865662.315 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:54:22.316Z,1528865662.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:54:22.316Z,1528865662.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:54:22.316Z,1528865662.316 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:54:22.317Z,1528865662.317 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:54:22.317Z,1528865662.317 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:54:22.706Z,1528865662.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:22.731Z,1528865662.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:54:22.732Z,1528865662.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:23.092Z,1528865663.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:23.121Z,1528865663.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:54:23.122Z,1528865663.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:23.494Z,1528865663.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:23.527Z,1528865663.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:54:23.528Z,1528865663.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:23.884Z,1528865663.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:23.917Z,1528865663.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:54:23.918Z,1528865663.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:24.283Z,1528865664.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:24.300Z,1528865664.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:54:24.317Z,1528865664.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:24.694Z,1528865664.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:24.728Z,1528865664.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:54:24.729Z,1528865664.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:25.097Z,1528865665.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:25.126Z,1528865665.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:54:25.127Z,1528865665.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:25.493Z,1528865665.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:25.527Z,1528865665.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:54:25.528Z,1528865665.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:25.884Z,1528865665.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:25.901Z,1528865665.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:54:25.902Z,1528865665.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:26.287Z,1528865666.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:26.328Z,1528865666.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:54:26.333Z,1528865666.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:26.698Z,1528865666.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:26.737Z,1528865666.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:54:26.738Z,1528865666.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:27.097Z,1528865667.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:27.130Z,1528865667.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:54:27.131Z,1528865667.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:27.497Z,1528865667.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:27.515Z,1528865667.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:54:27.516Z,1528865667.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:27.890Z,1528865667.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:27.908Z,1528865667.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T04:54:27.908Z,1528865667.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:28.288Z,1528865668.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:28.306Z,1528865668.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T04:54:28.307Z,1528865668.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:28.697Z,1528865668.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:28.716Z,1528865668.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T04:54:28.717Z,1528865668.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:29.097Z,1528865669.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:29.115Z,1528865669.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T04:54:29.116Z,1528865669.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:29.492Z,1528865669.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:29.521Z,1528865669.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T04:54:29.522Z,1528865669.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:29.890Z,1528865669.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:29.921Z,1528865669.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T04:54:29.922Z,1528865669.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:30.281Z,1528865670.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:30.306Z,1528865670.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T04:54:30.307Z,1528865670.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:30.698Z,1528865670.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:30.720Z,1528865670.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:54:30.721Z,1528865670.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:31.099Z,1528865671.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:31.116Z,1528865671.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T04:54:31.117Z,1528865671.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:31.500Z,1528865671.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:31.518Z,1528865671.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T04:54:31.519Z,1528865671.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:31.888Z,1528865671.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:31.913Z,1528865671.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T04:54:31.914Z,1528865671.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:32.291Z,1528865672.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:32.309Z,1528865672.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T04:54:32.310Z,1528865672.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:32.696Z,1528865672.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:32.714Z,1528865672.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T04:54:32.715Z,1528865672.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:33.099Z,1528865673.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:33.116Z,1528865673.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T04:54:33.117Z,1528865673.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:33.499Z,1528865673.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:33.524Z,1528865673.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T04:54:33.525Z,1528865673.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:33.890Z,1528865673.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:33.912Z,1528865673.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T04:54:33.913Z,1528865673.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:34.289Z,1528865674.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:34.307Z,1528865674.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T04:54:34.308Z,1528865674.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:34.703Z,1528865674.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:34.721Z,1528865674.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T04:54:34.722Z,1528865674.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:35.099Z,1528865675.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:35.117Z,1528865675.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T04:54:35.118Z,1528865675.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:35.499Z,1528865675.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:35.516Z,1528865675.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T04:54:35.519Z,1528865675.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:35.890Z,1528865675.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:35.912Z,1528865675.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T04:54:35.913Z,1528865675.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:36.290Z,1528865676.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:36.312Z,1528865676.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T04:54:36.313Z,1528865676.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:36.699Z,1528865676.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:36.716Z,1528865676.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T04:54:36.717Z,1528865676.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:37.102Z,1528865677.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:37.120Z,1528865677.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T04:54:37.121Z,1528865677.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:37.495Z,1528865677.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:37.513Z,1528865677.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T04:54:37.514Z,1528865677.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:37.879Z,1528865677.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:37.917Z,1528865677.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T04:54:37.918Z,1528865677.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:38.283Z,1528865678.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:38.321Z,1528865678.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T04:54:38.322Z,1528865678.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:38.700Z,1528865678.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:38.717Z,1528865678.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T04:54:38.718Z,1528865678.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:39.100Z,1528865679.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:39.118Z,1528865679.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T04:54:39.119Z,1528865679.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:39.497Z,1528865679.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:39.522Z,1528865679.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T04:54:39.523Z,1528865679.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:39.884Z,1528865679.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:39.920Z,1528865679.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T04:54:39.921Z,1528865679.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:40.283Z,1528865680.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:40.320Z,1528865680.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T04:54:40.321Z,1528865680.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:40.704Z,1528865680.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:40.722Z,1528865680.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T04:54:40.723Z,1528865680.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:41.103Z,1528865681.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:41.121Z,1528865681.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T04:54:41.122Z,1528865681.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:41.489Z,1528865681.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:41.524Z,1528865681.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:41.884Z,1528865681.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:41.918Z,1528865681.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:42.279Z,1528865682.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:42.297Z,1528865682.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:42.693Z,1528865682.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:42.727Z,1528865682.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:43.098Z,1528865683.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:43.136Z,1528865683.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:43.493Z,1528865683.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:43.527Z,1528865683.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:43.886Z,1528865683.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:43.904Z,1528865683.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:44.286Z,1528865684.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:44.304Z,1528865684.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:44.693Z,1528865684.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:44.711Z,1528865684.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:45.097Z,1528865685.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:45.145Z,1528865685.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:45.497Z,1528865685.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:45.531Z,1528865685.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:45.891Z,1528865685.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:45.916Z,1528865685.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:46.287Z,1528865686.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:46.305Z,1528865686.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:46.697Z,1528865686.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:46.715Z,1528865686.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:47.093Z,1528865687.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:47.111Z,1528865687.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:47.493Z,1528865687.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:47.511Z,1528865687.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:47.890Z,1528865687.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:47.908Z,1528865687.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:48.288Z,1528865688.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:48.306Z,1528865688.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:48.688Z,1528865688.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:48.706Z,1528865688.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:49.097Z,1528865689.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:49.115Z,1528865689.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:49.493Z,1528865689.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:49.511Z,1528865689.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:49.894Z,1528865689.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:49.912Z,1528865689.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:50.289Z,1528865690.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:50.307Z,1528865690.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:50.688Z,1528865690.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:50.706Z,1528865690.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:51.087Z,1528865691.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:51.118Z,1528865691.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:51.487Z,1528865691.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:51.521Z,1528865691.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:51.895Z,1528865691.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:51.914Z,1528865691.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:52.298Z,1528865692.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:52.320Z,1528865692.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:52.699Z,1528865692.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:52.717Z,1528865692.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:53.089Z,1528865693.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:53.107Z,1528865693.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:53.489Z,1528865693.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:53.506Z,1528865693.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:53.890Z,1528865693.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:53.908Z,1528865693.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:54.283Z,1528865694.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:54.307Z,1528865694.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:54.689Z,1528865694.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:54.707Z,1528865694.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:55.099Z,1528865695.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:55.117Z,1528865695.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:55.498Z,1528865695.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:55.516Z,1528865695.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:55.898Z,1528865695.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:55.915Z,1528865695.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:56.290Z,1528865696.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:56.308Z,1528865696.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:56.682Z,1528865696.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:56.716Z,1528865696.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:57.090Z,1528865697.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:57.107Z,1528865697.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:57.490Z,1528865697.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:57.508Z,1528865697.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:57.899Z,1528865697.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:57.917Z,1528865697.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:58.298Z,1528865698.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:58.320Z,1528865698.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:58.699Z,1528865698.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:58.718Z,1528865698.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:59.083Z,1528865699.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:59.107Z,1528865699.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:59.491Z,1528865699.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:59.509Z,1528865699.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:54:59.890Z,1528865699.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:54:59.908Z,1528865699.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:00.291Z,1528865700.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:00.309Z,1528865700.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:00.690Z,1528865700.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:00.707Z,1528865700.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:01.099Z,1528865701.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:01.117Z,1528865701.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:01.499Z,1528865701.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:01.524Z,1528865701.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:01.898Z,1528865701.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:01.915Z,1528865701.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:02.290Z,1528865702.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:02.309Z,1528865702.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:02.689Z,1528865702.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:02.707Z,1528865702.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:03.089Z,1528865703.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:03.108Z,1528865703.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:03.490Z,1528865703.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:03.508Z,1528865703.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:03.898Z,1528865703.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:03.916Z,1528865703.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:07.017Z,1528865707.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:07.054Z,1528865707.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:07.188Z,1528865707.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:07.225Z,1528865707.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:07.564Z,1528865707.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:07.598Z,1528865707.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:07.968Z,1528865707.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:08.004Z,1528865708.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:08.363Z,1528865708.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:08.397Z,1528865708.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:08.774Z,1528865708.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:08.813Z,1528865708.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:09.178Z,1528865709.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:09.208Z,1528865709.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:09.575Z,1528865709.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:09.613Z,1528865709.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:09.966Z,1528865709.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:09.992Z,1528865709.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:10.366Z,1528865710.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:10.392Z,1528865710.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:10.778Z,1528865710.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:10.816Z,1528865710.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:11.177Z,1528865711.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:11.216Z,1528865711.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:11.578Z,1528865711.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:11.596Z,1528865711.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:11.968Z,1528865711.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:11.986Z,1528865711.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:12.368Z,1528865712.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:12.386Z,1528865712.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:12.777Z,1528865712.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:12.795Z,1528865712.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:13.181Z,1528865713.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:13.199Z,1528865713.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:13.573Z,1528865713.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:13.591Z,1528865713.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:13.971Z,1528865713.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:13.989Z,1528865713.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:14.370Z,1528865714.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:14.388Z,1528865714.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:14.774Z,1528865714.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:14.792Z,1528865714.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:15.177Z,1528865715.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:15.195Z,1528865715.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:15.574Z,1528865715.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:15.592Z,1528865715.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:15.970Z,1528865715.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:15.988Z,1528865715.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:16.375Z,1528865716.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:16.392Z,1528865716.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:16.777Z,1528865716.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:16.795Z,1528865716.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:17.177Z,1528865717.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:17.195Z,1528865717.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:17.577Z,1528865717.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:17.595Z,1528865717.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:17.970Z,1528865717.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:17.988Z,1528865717.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:18.370Z,1528865718.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:18.387Z,1528865718.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:18.778Z,1528865718.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:18.800Z,1528865718.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:19.175Z,1528865719.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:19.193Z,1528865719.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:19.574Z,1528865719.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:19.600Z,1528865719.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:19.971Z,1528865719.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:19.989Z,1528865719.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:20.369Z,1528865720.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:20.387Z,1528865720.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:20.772Z,1528865720.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:20.804Z,1528865720.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:21.182Z,1528865721.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:21.212Z,1528865721.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:21.575Z,1528865721.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:21.593Z,1528865721.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:21.970Z,1528865721.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:21.988Z,1528865721.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:22.369Z,1528865722.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:22.388Z,1528865722.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:22.779Z,1528865722.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:22.796Z,1528865722.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:23.182Z,1528865723.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:23.200Z,1528865723.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:23.582Z,1528865723.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:23.600Z,1528865723.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:23.960Z,1528865723.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:23.990Z,1528865723.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:24.366Z,1528865724.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:24.396Z,1528865724.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:24.779Z,1528865724.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:24.797Z,1528865724.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:25.178Z,1528865725.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:25.200Z,1528865725.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:25.579Z,1528865725.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:25.597Z,1528865725.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:25.964Z,1528865725.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:25.994Z,1528865725.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:26.363Z,1528865726.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:26.400Z,1528865726.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:26.780Z,1528865726.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:26.798Z,1528865726.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:27.183Z,1528865727.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:27.214Z,1528865727.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:27.569Z,1528865727.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:27.603Z,1528865727.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:27.964Z,1528865727.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:27.996Z,1528865727.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:28.363Z,1528865728.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:28.397Z,1528865728.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:28.769Z,1528865728.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:28.803Z,1528865728.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:29.182Z,1528865729.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:29.199Z,1528865729.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:29.580Z,1528865729.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:29.612Z,1528865729.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:29.964Z,1528865729.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:30.003Z,1528865730.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:30.363Z,1528865730.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:30.392Z,1528865730.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:30.777Z,1528865730.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:30.807Z,1528865730.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:31.173Z,1528865731.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:31.207Z,1528865731.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:31.573Z,1528865731.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:31.600Z,1528865731.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:31.964Z,1528865731.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:31.998Z,1528865731.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:32.363Z,1528865732.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:32.381Z,1528865732.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:32.778Z,1528865732.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:32.811Z,1528865732.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:33.177Z,1528865733.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:33.215Z,1528865733.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:33.577Z,1528865733.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:33.615Z,1528865733.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:33.970Z,1528865733.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:33.988Z,1528865733.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:34.366Z,1528865734.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:34.384Z,1528865734.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:34.773Z,1528865734.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:34.792Z,1528865734.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:35.177Z,1528865735.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:35.195Z,1528865735.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:35.581Z,1528865735.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:35.615Z,1528865735.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:35.969Z,1528865735.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:35.987Z,1528865735.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:36.369Z,1528865736.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:36.387Z,1528865736.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:36.777Z,1528865736.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:36.795Z,1528865736.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:37.173Z,1528865737.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:37.191Z,1528865737.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:37.574Z,1528865737.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:37.592Z,1528865737.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:37.968Z,1528865737.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:37.998Z,1528865737.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:38.369Z,1528865738.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:38.392Z,1528865738.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:38.787Z,1528865738.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:38.805Z,1528865738.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:39.184Z,1528865739.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:39.202Z,1528865739.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:39.580Z,1528865739.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:39.598Z,1528865739.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:39.963Z,1528865739.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:39.997Z,1528865739.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:40.364Z,1528865740.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:40.401Z,1528865740.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:40.763Z,1528865740.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:40.795Z,1528865740.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:41.180Z,1528865741.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:41.197Z,1528865741.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:41.584Z,1528865741.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:41.603Z,1528865741.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:41.979Z,1528865741.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:41.997Z,1528865741.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:42.367Z,1528865742.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:42.395Z,1528865742.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:42.763Z,1528865742.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:42.800Z,1528865742.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:43.164Z,1528865743.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:43.200Z,1528865743.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:43.563Z,1528865743.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:43.592Z,1528865743.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:43.978Z,1528865743.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:44.012Z,1528865744.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:44.378Z,1528865744.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:44.406Z,1528865744.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:44.773Z,1528865744.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:44.812Z,1528865744.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:45.163Z,1528865745.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:45.181Z,1528865745.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:45.567Z,1528865745.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:45.584Z,1528865745.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:45.963Z,1528865745.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:45.981Z,1528865745.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:46.368Z,1528865746.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:46.387Z,1528865746.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:46.766Z,1528865746.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:46.784Z,1528865746.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:47.177Z,1528865747.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:47.211Z,1528865747.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:47.578Z,1528865747.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:47.616Z,1528865747.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:47.974Z,1528865747.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:47.992Z,1528865747.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:48.366Z,1528865748.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:48.392Z,1528865748.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:48.769Z,1528865748.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:48.792Z,1528865748.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:49.166Z,1528865749.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:49.184Z,1528865749.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:49.567Z,1528865749.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:49.586Z,1528865749.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:49.977Z,1528865749.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:49.996Z,1528865749.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:50.377Z,1528865750.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:50.396Z,1528865750.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:50.773Z,1528865750.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:50.791Z,1528865750.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:51.169Z,1528865751.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:51.189Z,1528865751.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:51.569Z,1528865751.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:51.587Z,1528865751.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:51.970Z,1528865751.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:51.988Z,1528865751.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:52.370Z,1528865752.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:52.388Z,1528865752.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:52.769Z,1528865752.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:52.787Z,1528865752.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:53.174Z,1528865753.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:53.192Z,1528865753.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:53.577Z,1528865753.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:53.595Z,1528865753.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:53.974Z,1528865753.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:53.992Z,1528865753.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:54.368Z,1528865754.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:54.386Z,1528865754.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:54.770Z,1528865754.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:54.788Z,1528865754.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:55.171Z,1528865755.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:55.189Z,1528865755.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:55.568Z,1528865755.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:55.588Z,1528865755.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:55.978Z,1528865755.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:55.996Z,1528865755.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:56.374Z,1528865756.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:56.392Z,1528865756.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:56.774Z,1528865756.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:56.792Z,1528865756.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:57.168Z,1528865757.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:57.193Z,1528865757.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:57.568Z,1528865757.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:57.586Z,1528865757.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:57.967Z,1528865757.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:57.992Z,1528865757.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:58.368Z,1528865758.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:58.402Z,1528865758.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:58.763Z,1528865758.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:58.788Z,1528865758.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:59.174Z,1528865759.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:59.193Z,1528865759.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:59.577Z,1528865759.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:59.596Z,1528865759.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:55:59.974Z,1528865759.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:55:59.997Z,1528865759.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:00.368Z,1528865760.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:00.386Z,1528865760.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:00.770Z,1528865760.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:00.788Z,1528865760.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:01.170Z,1528865761.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:01.188Z,1528865761.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:04.298Z,1528865764.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:04.326Z,1528865764.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:04.329Z,1528865764.329 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T04:51:03.9Z
2018-06-13T04:56:04.329Z,1528865764.329 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T04:56:04.329Z,1528865764.329 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T04:56:04.458Z,1528865764.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:04.500Z,1528865764.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:05.608Z,1528865765.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:05.625Z,1528865765.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:05.758Z,1528865765.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:05.800Z,1528865765.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:06.143Z,1528865766.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:06.176Z,1528865766.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:06.547Z,1528865766.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:06.577Z,1528865766.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:06.943Z,1528865766.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:06.984Z,1528865766.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:07.347Z,1528865767.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:07.375Z,1528865767.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:07.747Z,1528865767.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:07.776Z,1528865767.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:10.978Z,1528865770.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:10.996Z,1528865770.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:11.101Z,1528865771.101 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0036.lzma
2018-06-13T04:56:11.146Z,1528865771.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:11.170Z,1528865771.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:11.570Z,1528865771.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:11.596Z,1528865771.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:11.901Z,1528865771.901 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0036.lzma.bak
2018-06-13T04:56:11.902Z,1528865771.902 [DataOverHttps](INFO): SBD MOMSN=8328607
2018-06-13T04:56:11.943Z,1528865771.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:11.960Z,1528865771.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:13.808Z,1528865773.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:13.844Z,1528865773.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:13.951Z,1528865773.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:13.995Z,1528865773.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:14.375Z,1528865774.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:14.400Z,1528865774.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:18.885Z,1528865778.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:18.903Z,1528865778.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:19.039Z,1528865779.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:19.072Z,1528865779.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:19.438Z,1528865779.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:19.461Z,1528865779.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:19.839Z,1528865779.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:19.858Z,1528865779.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:20.239Z,1528865780.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:20.256Z,1528865780.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:20.639Z,1528865780.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:20.673Z,1528865780.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:21.049Z,1528865781.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:21.075Z,1528865781.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:21.448Z,1528865781.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:21.466Z,1528865781.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:21.854Z,1528865781.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:21.871Z,1528865781.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:24.948Z,1528865784.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:24.966Z,1528865784.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:25.056Z,1528865785.056 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20180613T032335/Express0037.lzma
2018-06-13T04:56:25.126Z,1528865785.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:25.152Z,1528865785.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:25.497Z,1528865785.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:25.515Z,1528865785.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:25.854Z,1528865785.854 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0037.lzma.bak
2018-06-13T04:56:25.854Z,1528865785.854 [DataOverHttps](INFO): SBD MOMSN=8328609
2018-06-13T04:56:25.911Z,1528865785.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:25.945Z,1528865785.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:27.754Z,1528865787.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:27.777Z,1528865787.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:27.780Z,1528865787.780 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T04:56:27.780Z,1528865787.780 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T04:56:27.780Z,1528865787.780 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T04:56:27.902Z,1528865787.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:27.927Z,1528865787.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:28.307Z,1528865788.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:28.326Z,1528865788.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:28.702Z,1528865788.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:28.742Z,1528865788.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:29.106Z,1528865789.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:29.123Z,1528865789.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:29.505Z,1528865789.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:29.523Z,1528865789.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:29.910Z,1528865789.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:29.928Z,1528865789.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:30.315Z,1528865790.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:30.345Z,1528865790.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:30.714Z,1528865790.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:30.732Z,1528865790.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:31.105Z,1528865791.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:31.123Z,1528865791.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:34.216Z,1528865794.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:34.259Z,1528865794.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:34.396Z,1528865794.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:34.415Z,1528865794.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:34.800Z,1528865794.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:34.824Z,1528865794.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:35.197Z,1528865795.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:35.216Z,1528865795.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:35.572Z,1528865795.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:35.608Z,1528865795.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:35.975Z,1528865795.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:36.012Z,1528865796.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:36.381Z,1528865796.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:36.410Z,1528865796.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:36.775Z,1528865796.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:36.807Z,1528865796.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:37.190Z,1528865797.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:37.214Z,1528865797.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:37.597Z,1528865797.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:37.621Z,1528865797.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:37.981Z,1528865797.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:38.016Z,1528865798.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:38.375Z,1528865798.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:38.412Z,1528865798.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:38.775Z,1528865798.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:38.809Z,1528865798.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:39.176Z,1528865799.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:39.208Z,1528865799.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:39.575Z,1528865799.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:39.608Z,1528865799.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:39.996Z,1528865799.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:40.015Z,1528865800.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:40.395Z,1528865800.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:40.414Z,1528865800.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:40.792Z,1528865800.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:40.809Z,1528865800.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:41.175Z,1528865801.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:41.210Z,1528865801.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:41.571Z,1528865801.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:41.589Z,1528865801.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:41.975Z,1528865801.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:41.992Z,1528865801.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:42.376Z,1528865802.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:42.413Z,1528865802.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:42.778Z,1528865802.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:42.796Z,1528865802.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:43.189Z,1528865803.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:43.223Z,1528865803.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:43.589Z,1528865803.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:43.607Z,1528865803.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:43.982Z,1528865803.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:44.000Z,1528865804.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:44.380Z,1528865804.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:44.397Z,1528865804.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:44.782Z,1528865804.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:44.800Z,1528865804.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:45.182Z,1528865805.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:45.200Z,1528865805.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:45.580Z,1528865805.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:45.597Z,1528865805.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:45.989Z,1528865805.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:46.007Z,1528865806.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:46.393Z,1528865806.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:46.411Z,1528865806.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:46.786Z,1528865806.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:46.808Z,1528865806.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:47.179Z,1528865807.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:47.212Z,1528865807.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:47.581Z,1528865807.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:47.598Z,1528865807.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:47.984Z,1528865807.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:48.002Z,1528865808.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:48.381Z,1528865808.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:48.399Z,1528865808.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:48.781Z,1528865808.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:48.799Z,1528865808.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:49.186Z,1528865809.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:49.208Z,1528865809.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:49.589Z,1528865809.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:49.607Z,1528865809.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:49.987Z,1528865809.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:50.005Z,1528865810.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:50.379Z,1528865810.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:50.401Z,1528865810.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:50.782Z,1528865810.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:50.800Z,1528865810.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:51.182Z,1528865811.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:51.200Z,1528865811.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:51.580Z,1528865811.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:51.598Z,1528865811.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:51.987Z,1528865811.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:52.012Z,1528865812.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:52.386Z,1528865812.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:52.408Z,1528865812.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:52.786Z,1528865812.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:52.804Z,1528865812.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:53.182Z,1528865813.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:53.200Z,1528865813.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:53.581Z,1528865813.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:53.604Z,1528865813.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:53.980Z,1528865813.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:53.998Z,1528865813.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:54.381Z,1528865814.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:54.399Z,1528865814.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:54.775Z,1528865814.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:54.799Z,1528865814.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:55.186Z,1528865815.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:55.208Z,1528865815.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:55.589Z,1528865815.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:55.607Z,1528865815.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:55.986Z,1528865815.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:56.008Z,1528865816.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:56.411Z,1528865816.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:56.499Z,1528865816.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:56.783Z,1528865816.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:56.802Z,1528865816.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:57.179Z,1528865817.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:57.300Z,1528865817.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:57.582Z,1528865817.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:57.644Z,1528865817.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:58.002Z,1528865818.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:58.058Z,1528865818.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:58.391Z,1528865818.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:58.501Z,1528865818.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:58.790Z,1528865818.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:58.808Z,1528865818.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:59.182Z,1528865819.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:59.200Z,1528865819.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:59.581Z,1528865819.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:59.599Z,1528865819.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:56:59.981Z,1528865819.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:56:59.998Z,1528865819.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:00.378Z,1528865820.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:00.396Z,1528865820.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:00.781Z,1528865820.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:00.798Z,1528865820.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:01.190Z,1528865821.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:01.208Z,1528865821.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:01.592Z,1528865821.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:01.616Z,1528865821.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:01.987Z,1528865821.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:02.005Z,1528865822.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:02.379Z,1528865822.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:02.412Z,1528865822.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:02.782Z,1528865822.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:02.805Z,1528865822.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:03.182Z,1528865823.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:03.200Z,1528865823.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:03.578Z,1528865823.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:03.603Z,1528865823.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:03.996Z,1528865823.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:04.014Z,1528865824.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:04.392Z,1528865824.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:04.416Z,1528865824.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:04.794Z,1528865824.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:04.816Z,1528865824.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:05.179Z,1528865825.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:05.208Z,1528865825.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:05.581Z,1528865825.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:05.599Z,1528865825.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:05.979Z,1528865825.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:06.003Z,1528865826.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:06.388Z,1528865826.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:06.406Z,1528865826.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:06.782Z,1528865826.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:06.799Z,1528865826.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:07.190Z,1528865827.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:07.216Z,1528865827.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:07.597Z,1528865827.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:07.615Z,1528865827.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:07.992Z,1528865827.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:08.010Z,1528865828.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:08.375Z,1528865828.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:08.412Z,1528865828.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:08.775Z,1528865828.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:08.810Z,1528865828.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:09.172Z,1528865829.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:09.209Z,1528865829.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:09.575Z,1528865829.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:09.608Z,1528865829.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:09.989Z,1528865829.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:10.024Z,1528865830.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:10.385Z,1528865830.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:10.414Z,1528865830.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:10.785Z,1528865830.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:10.812Z,1528865830.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:11.176Z,1528865831.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:11.210Z,1528865831.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:11.575Z,1528865831.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:11.616Z,1528865831.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:11.979Z,1528865831.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:11.996Z,1528865831.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:12.379Z,1528865832.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:12.397Z,1528865832.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:12.779Z,1528865832.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:12.796Z,1528865832.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:13.190Z,1528865833.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:13.226Z,1528865833.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:13.589Z,1528865833.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:13.627Z,1528865833.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:13.981Z,1528865833.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:13.999Z,1528865833.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:14.378Z,1528865834.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:14.396Z,1528865834.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:14.782Z,1528865834.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:14.800Z,1528865834.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:15.180Z,1528865835.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:15.199Z,1528865835.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:15.578Z,1528865835.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:15.600Z,1528865835.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:15.989Z,1528865835.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:16.007Z,1528865836.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:16.389Z,1528865836.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:16.407Z,1528865836.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:16.786Z,1528865836.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:16.804Z,1528865836.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:17.180Z,1528865837.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:17.206Z,1528865837.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:17.580Z,1528865837.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:17.598Z,1528865837.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:17.986Z,1528865837.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:18.004Z,1528865838.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:18.390Z,1528865838.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:18.408Z,1528865838.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:18.782Z,1528865838.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:18.801Z,1528865838.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:19.180Z,1528865839.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:19.201Z,1528865839.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:19.579Z,1528865839.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:19.613Z,1528865839.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:19.991Z,1528865839.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:20.013Z,1528865840.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:20.390Z,1528865840.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:20.413Z,1528865840.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:20.791Z,1528865840.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:20.809Z,1528865840.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:21.175Z,1528865841.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:21.199Z,1528865841.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:21.579Z,1528865841.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:21.612Z,1528865841.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:21.995Z,1528865841.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:22.020Z,1528865842.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:22.394Z,1528865842.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:22.416Z,1528865842.416 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:22.416Z,1528865842.416 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2018-06-13T04:57:22.416Z,1528865842.416 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T04:57:22.418Z,1528865842.418 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:22.418Z,1528865842.418 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31
2018-06-13T04:57:22.418Z,1528865842.418 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T04:57:22.420Z,1528865842.420 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:22.420Z,1528865842.420 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2018-06-13T04:57:22.420Z,1528865842.420 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T04:57:22.517Z,1528865842.517 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T04:57:22.517Z,1528865842.517 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T04:57:22.518Z,1528865842.518 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T04:57:22.795Z,1528865842.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:22.889Z,1528865842.889 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T04:57:22.889Z,1528865842.889 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2018-06-13T04:57:22.890Z,1528865842.890 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T04:57:22.890Z,1528865842.890 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31
2018-06-13T04:57:22.890Z,1528865842.890 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T04:57:22.890Z,1528865842.890 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2018-06-13T04:57:23.172Z,1528865843.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:23.208Z,1528865843.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T04:57:23.209Z,1528865843.209 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:57:23.209Z,1528865843.209 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:57:23.209Z,1528865843.209 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T04:57:23.210Z,1528865843.210 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:57:23.210Z,1528865843.210 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:57:23.210Z,1528865843.210 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T04:57:23.211Z,1528865843.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T04:57:23.211Z,1528865843.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T04:57:23.571Z,1528865843.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:23.606Z,1528865843.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T04:57:23.607Z,1528865843.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:23.991Z,1528865843.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:24.009Z,1528865844.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T04:57:24.010Z,1528865844.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:24.396Z,1528865844.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:24.414Z,1528865844.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T04:57:24.415Z,1528865844.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:24.788Z,1528865844.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:24.806Z,1528865844.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T04:57:24.807Z,1528865844.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:25.171Z,1528865845.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:25.200Z,1528865845.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T04:57:25.205Z,1528865845.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:25.575Z,1528865845.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:25.617Z,1528865845.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T04:57:25.618Z,1528865845.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:25.981Z,1528865845.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:26.008Z,1528865846.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T04:57:26.009Z,1528865846.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:26.396Z,1528865846.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:26.413Z,1528865846.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T04:57:26.414Z,1528865846.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:26.797Z,1528865846.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:26.815Z,1528865846.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T04:57:26.816Z,1528865846.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:27.171Z,1528865847.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:27.201Z,1528865847.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T04:57:27.202Z,1528865847.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:27.575Z,1528865847.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:27.609Z,1528865847.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T04:57:27.610Z,1528865847.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:27.993Z,1528865847.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:28.022Z,1528865848.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T04:57:28.023Z,1528865848.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:28.389Z,1528865848.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:28.416Z,1528865848.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T04:57:28.417Z,1528865848.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:31.619Z,1528865851.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:31.636Z,1528865851.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T04:57:31.637Z,1528865851.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:31.777Z,1528865851.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:31.823Z,1528865851.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T04:57:31.824Z,1528865851.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:32.175Z,1528865852.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:32.193Z,1528865852.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T04:57:32.194Z,1528865852.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:32.578Z,1528865852.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:32.620Z,1528865852.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T04:57:32.625Z,1528865852.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:32.985Z,1528865852.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:33.003Z,1528865853.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T04:57:33.004Z,1528865853.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:33.385Z,1528865853.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:33.403Z,1528865853.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T04:57:33.404Z,1528865853.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:33.783Z,1528865853.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:33.801Z,1528865853.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T04:57:33.802Z,1528865853.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:34.176Z,1528865854.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:34.207Z,1528865854.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-06-13T04:57:34.208Z,1528865854.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:34.575Z,1528865854.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:34.599Z,1528865854.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T04:57:34.600Z,1528865854.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:34.988Z,1528865854.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:35.006Z,1528865855.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T04:57:35.007Z,1528865855.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:35.386Z,1528865855.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:35.416Z,1528865855.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T04:57:35.421Z,1528865855.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:35.789Z,1528865855.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:35.807Z,1528865855.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T04:57:35.808Z,1528865855.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:36.180Z,1528865856.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:36.198Z,1528865856.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T04:57:36.199Z,1528865856.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:36.575Z,1528865856.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:36.604Z,1528865856.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T04:57:36.609Z,1528865856.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:36.988Z,1528865856.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:37.006Z,1528865857.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T04:57:37.007Z,1528865857.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:37.388Z,1528865857.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:37.407Z,1528865857.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T04:57:37.408Z,1528865857.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:37.787Z,1528865857.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:37.806Z,1528865857.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T04:57:37.807Z,1528865857.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:38.168Z,1528865858.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:38.214Z,1528865858.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T04:57:38.214Z,1528865858.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:38.567Z,1528865858.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:38.603Z,1528865858.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T04:57:38.604Z,1528865858.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:38.991Z,1528865858.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:39.010Z,1528865859.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T04:57:39.011Z,1528865859.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:39.391Z,1528865859.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:39.410Z,1528865859.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T04:57:39.411Z,1528865859.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:39.787Z,1528865859.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:39.808Z,1528865859.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T04:57:39.808Z,1528865859.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:40.168Z,1528865860.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:40.200Z,1528865860.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T04:57:40.202Z,1528865860.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:40.571Z,1528865860.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:40.608Z,1528865860.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T04:57:40.609Z,1528865860.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:40.987Z,1528865860.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:41.016Z,1528865861.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T04:57:41.017Z,1528865861.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:41.391Z,1528865861.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:41.409Z,1528865861.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T04:57:41.410Z,1528865861.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:41.783Z,1528865861.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:41.801Z,1528865861.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T04:57:41.802Z,1528865861.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:42.171Z,1528865862.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:42.200Z,1528865862.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T04:57:42.202Z,1528865862.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:42.571Z,1528865862.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:42.608Z,1528865862.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:42.991Z,1528865862.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:43.010Z,1528865863.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:43.387Z,1528865863.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:43.412Z,1528865863.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:43.787Z,1528865863.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:43.806Z,1528865863.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:44.172Z,1528865864.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:44.215Z,1528865864.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:44.571Z,1528865864.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:44.600Z,1528865864.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:44.991Z,1528865864.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:45.010Z,1528865865.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:45.391Z,1528865865.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:45.409Z,1528865865.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:45.787Z,1528865865.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:45.808Z,1528865865.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:46.172Z,1528865866.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:46.208Z,1528865866.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:46.571Z,1528865866.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:46.609Z,1528865866.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:46.992Z,1528865866.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:47.011Z,1528865867.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:47.391Z,1528865867.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:47.409Z,1528865867.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:47.791Z,1528865867.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:47.810Z,1528865867.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:48.171Z,1528865868.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:48.199Z,1528865868.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:48.571Z,1528865868.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:48.608Z,1528865868.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:48.987Z,1528865868.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:49.006Z,1528865869.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:49.387Z,1528865869.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:49.405Z,1528865869.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:49.787Z,1528865869.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:49.805Z,1528865869.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:50.172Z,1528865870.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:50.200Z,1528865870.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:50.567Z,1528865870.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:50.595Z,1528865870.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:50.991Z,1528865870.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:51.016Z,1528865871.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:51.391Z,1528865871.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:51.409Z,1528865871.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:51.787Z,1528865871.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:51.812Z,1528865871.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:52.172Z,1528865872.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:52.208Z,1528865872.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:52.582Z,1528865872.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:52.604Z,1528865872.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:52.987Z,1528865872.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:53.005Z,1528865873.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:53.391Z,1528865873.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:53.409Z,1528865873.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:53.787Z,1528865873.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:53.805Z,1528865873.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:54.171Z,1528865874.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:54.200Z,1528865874.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:54.572Z,1528865874.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:54.600Z,1528865874.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:54.987Z,1528865874.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:55.006Z,1528865875.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:55.388Z,1528865875.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:55.406Z,1528865875.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:55.787Z,1528865875.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:55.806Z,1528865875.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:56.171Z,1528865876.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:56.214Z,1528865876.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:56.567Z,1528865876.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:56.597Z,1528865876.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:56.971Z,1528865876.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:56.999Z,1528865876.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:57.391Z,1528865877.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:57.409Z,1528865877.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:57.787Z,1528865877.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:57.805Z,1528865877.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:58.187Z,1528865878.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:58.206Z,1528865878.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:58.571Z,1528865878.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:58.608Z,1528865878.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:58.967Z,1528865878.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:58.995Z,1528865878.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:59.372Z,1528865879.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:59.400Z,1528865879.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:57:59.771Z,1528865879.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:57:59.808Z,1528865879.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:00.187Z,1528865880.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:00.206Z,1528865880.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:00.591Z,1528865880.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:00.610Z,1528865880.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:00.987Z,1528865880.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:01.005Z,1528865881.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:01.368Z,1528865881.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:01.398Z,1528865881.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:01.771Z,1528865881.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:01.798Z,1528865881.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:02.171Z,1528865882.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:02.216Z,1528865882.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:02.567Z,1528865882.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:02.596Z,1528865882.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:02.971Z,1528865882.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:02.999Z,1528865882.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:03.388Z,1528865883.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:03.407Z,1528865883.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:03.788Z,1528865883.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:03.806Z,1528865883.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:04.192Z,1528865884.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:04.210Z,1528865884.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:04.571Z,1528865884.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:04.606Z,1528865884.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:04.967Z,1528865884.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:05.001Z,1528865885.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:05.372Z,1528865885.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:05.405Z,1528865885.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:05.771Z,1528865885.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:05.799Z,1528865885.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:06.193Z,1528865886.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:06.212Z,1528865886.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:06.592Z,1528865886.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:06.616Z,1528865886.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:06.986Z,1528865886.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:07.011Z,1528865887.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:07.367Z,1528865887.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:07.404Z,1528865887.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:07.771Z,1528865887.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:07.810Z,1528865887.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:08.171Z,1528865888.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:08.219Z,1528865888.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:08.572Z,1528865888.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:08.611Z,1528865888.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:08.972Z,1528865888.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:09.014Z,1528865889.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:09.381Z,1528865889.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:09.412Z,1528865889.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:09.792Z,1528865889.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:09.811Z,1528865889.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:10.177Z,1528865890.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:10.206Z,1528865890.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:10.571Z,1528865890.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:10.608Z,1528865890.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:10.971Z,1528865890.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:11.011Z,1528865891.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:11.373Z,1528865891.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:11.403Z,1528865891.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:11.775Z,1528865891.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:11.808Z,1528865891.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:12.185Z,1528865892.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:12.215Z,1528865892.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:12.585Z,1528865892.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:12.613Z,1528865892.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:12.985Z,1528865892.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:13.014Z,1528865893.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:13.375Z,1528865893.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:13.392Z,1528865893.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:13.772Z,1528865893.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:13.790Z,1528865893.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:14.175Z,1528865894.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:14.194Z,1528865894.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:14.571Z,1528865894.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:14.589Z,1528865894.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:14.972Z,1528865894.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:14.990Z,1528865894.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:15.386Z,1528865895.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:15.425Z,1528865895.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:15.787Z,1528865895.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:15.831Z,1528865895.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:16.178Z,1528865896.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:16.196Z,1528865896.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:16.574Z,1528865896.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:16.593Z,1528865896.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:16.972Z,1528865896.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:16.991Z,1528865896.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:17.373Z,1528865897.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:17.391Z,1528865897.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:17.774Z,1528865897.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:17.792Z,1528865897.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:18.184Z,1528865898.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:18.203Z,1528865898.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:18.582Z,1528865898.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:18.600Z,1528865898.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:18.982Z,1528865898.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:18.000Z,1528865899.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:19.374Z,1528865899.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:19.391Z,1528865899.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:19.771Z,1528865899.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:19.793Z,1528865899.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:20.175Z,1528865900.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:20.192Z,1528865900.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:20.578Z,1528865900.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:20.595Z,1528865900.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:20.971Z,1528865900.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:20.993Z,1528865900.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:21.381Z,1528865901.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:21.400Z,1528865901.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:21.781Z,1528865901.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:21.799Z,1528865901.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:22.178Z,1528865902.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:22.201Z,1528865902.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:22.576Z,1528865902.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:22.594Z,1528865902.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:22.976Z,1528865902.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:22.994Z,1528865902.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:23.372Z,1528865903.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:23.397Z,1528865903.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:23.770Z,1528865903.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:23.800Z,1528865903.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:24.181Z,1528865904.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:24.199Z,1528865904.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:24.585Z,1528865904.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:24.604Z,1528865904.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:24.982Z,1528865904.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:24.000Z,1528865905.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:25.377Z,1528865905.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:25.394Z,1528865905.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:25.771Z,1528865905.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:25.793Z,1528865905.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:26.176Z,1528865906.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:26.194Z,1528865906.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:26.577Z,1528865906.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:26.595Z,1528865906.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:26.971Z,1528865906.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:26.993Z,1528865906.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:27.390Z,1528865907.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:27.428Z,1528865907.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:27.785Z,1528865907.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:27.803Z,1528865907.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:28.182Z,1528865908.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:28.200Z,1528865908.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:28.578Z,1528865908.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:28.596Z,1528865908.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:31.685Z,1528865911.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:31.703Z,1528865911.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:31.840Z,1528865911.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:31.883Z,1528865911.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:32.250Z,1528865912.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:32.282Z,1528865912.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:32.657Z,1528865912.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:32.692Z,1528865912.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:33.046Z,1528865913.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:33.076Z,1528865913.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:33.439Z,1528865913.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:33.457Z,1528865913.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:33.834Z,1528865913.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:33.851Z,1528865913.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:34.239Z,1528865914.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:34.257Z,1528865914.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:34.638Z,1528865914.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:34.656Z,1528865914.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:35.049Z,1528865915.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:35.089Z,1528865915.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:35.446Z,1528865915.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:35.464Z,1528865915.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:35.850Z,1528865915.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:35.867Z,1528865915.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:36.241Z,1528865916.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:36.258Z,1528865916.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:36.641Z,1528865916.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:36.659Z,1528865916.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:37.040Z,1528865917.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:37.058Z,1528865917.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:37.449Z,1528865917.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:37.468Z,1528865917.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:37.846Z,1528865917.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:37.863Z,1528865917.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:38.250Z,1528865918.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:38.267Z,1528865918.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:38.638Z,1528865918.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:38.660Z,1528865918.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:39.041Z,1528865919.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:39.059Z,1528865919.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:39.440Z,1528865919.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:39.458Z,1528865919.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:39.841Z,1528865919.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:39.858Z,1528865919.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:40.247Z,1528865920.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:40.264Z,1528865920.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:40.650Z,1528865920.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:40.667Z,1528865920.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:41.045Z,1528865921.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:41.068Z,1528865921.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:41.440Z,1528865921.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:41.458Z,1528865921.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:41.841Z,1528865921.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:41.859Z,1528865921.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:42.241Z,1528865922.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:42.259Z,1528865922.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:42.638Z,1528865922.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:42.656Z,1528865922.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:43.042Z,1528865923.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:43.060Z,1528865923.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:43.445Z,1528865923.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:43.463Z,1528865923.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:43.846Z,1528865923.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:43.863Z,1528865923.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:44.246Z,1528865924.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:44.263Z,1528865924.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:44.641Z,1528865924.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:44.658Z,1528865924.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:45.036Z,1528865925.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:45.068Z,1528865925.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:45.440Z,1528865925.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:45.466Z,1528865925.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:45.839Z,1528865925.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:45.856Z,1528865925.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:46.243Z,1528865926.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:46.268Z,1528865926.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:46.650Z,1528865926.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:46.667Z,1528865926.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:47.045Z,1528865927.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:47.068Z,1528865927.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:47.441Z,1528865927.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:47.459Z,1528865927.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:47.841Z,1528865927.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:47.859Z,1528865927.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:48.238Z,1528865928.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:48.260Z,1528865928.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:48.639Z,1528865928.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:48.657Z,1528865928.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:49.040Z,1528865929.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:49.067Z,1528865929.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:49.449Z,1528865929.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:49.467Z,1528865929.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:49.846Z,1528865929.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:49.868Z,1528865929.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:50.246Z,1528865930.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:50.264Z,1528865930.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:50.642Z,1528865930.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:50.659Z,1528865930.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:51.035Z,1528865931.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:51.079Z,1528865931.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:51.440Z,1528865931.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:51.467Z,1528865931.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:51.843Z,1528865931.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:51.861Z,1528865931.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:52.246Z,1528865932.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:52.265Z,1528865932.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:52.650Z,1528865932.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:52.668Z,1528865932.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:53.047Z,1528865933.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:53.065Z,1528865933.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:53.435Z,1528865933.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:53.472Z,1528865933.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:53.841Z,1528865933.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:53.859Z,1528865933.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:54.242Z,1528865934.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:54.260Z,1528865934.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:54.643Z,1528865934.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:54.660Z,1528865934.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:55.039Z,1528865935.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:55.069Z,1528865935.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:55.451Z,1528865935.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:55.469Z,1528865935.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:55.851Z,1528865935.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:55.870Z,1528865935.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:56.250Z,1528865936.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:56.268Z,1528865936.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:56.642Z,1528865936.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:56.660Z,1528865936.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:57.034Z,1528865937.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:57.060Z,1528865937.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:57.442Z,1528865937.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:57.464Z,1528865937.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:57.838Z,1528865937.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:57.856Z,1528865937.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:58.249Z,1528865938.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:58.267Z,1528865938.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:58.651Z,1528865938.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:58.669Z,1528865938.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:59.052Z,1528865939.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:59.069Z,1528865939.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:59.440Z,1528865939.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:59.458Z,1528865939.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:58:59.842Z,1528865939.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:58:59.860Z,1528865939.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:00.243Z,1528865940.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:00.260Z,1528865940.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:00.636Z,1528865940.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:00.669Z,1528865940.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:01.039Z,1528865941.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:01.072Z,1528865941.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:01.456Z,1528865941.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:01.474Z,1528865941.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:01.855Z,1528865941.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:01.880Z,1528865941.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:02.252Z,1528865942.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:02.270Z,1528865942.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:02.631Z,1528865942.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:02.668Z,1528865942.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:03.031Z,1528865943.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:03.074Z,1528865943.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:03.442Z,1528865943.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:03.465Z,1528865943.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:03.831Z,1528865943.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:03.865Z,1528865943.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:04.249Z,1528865944.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:04.268Z,1528865944.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:04.653Z,1528865944.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:04.677Z,1528865944.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:05.052Z,1528865945.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:05.070Z,1528865945.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:05.431Z,1528865945.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:05.468Z,1528865945.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:05.841Z,1528865945.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:05.859Z,1528865945.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:06.242Z,1528865946.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:06.260Z,1528865946.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:06.631Z,1528865946.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:06.662Z,1528865946.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:07.035Z,1528865947.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:07.062Z,1528865947.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:07.456Z,1528865947.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:07.474Z,1528865947.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:07.851Z,1528865947.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:07.870Z,1528865947.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:08.252Z,1528865948.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:08.270Z,1528865948.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:08.631Z,1528865948.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:08.668Z,1528865948.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:09.031Z,1528865949.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:09.067Z,1528865949.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:09.436Z,1528865949.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:09.476Z,1528865949.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:09.831Z,1528865949.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:09.864Z,1528865949.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:10.246Z,1528865950.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:10.285Z,1528865950.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:10.655Z,1528865950.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:10.673Z,1528865950.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:11.049Z,1528865951.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:11.088Z,1528865951.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:11.431Z,1528865951.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:11.465Z,1528865951.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:11.835Z,1528865951.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:11.868Z,1528865951.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:12.235Z,1528865952.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:12.252Z,1528865952.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:12.636Z,1528865952.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:12.653Z,1528865952.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:13.036Z,1528865953.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:13.075Z,1528865953.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:13.449Z,1528865953.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:13.490Z,1528865953.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:13.845Z,1528865953.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:13.863Z,1528865953.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:14.249Z,1528865954.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:14.282Z,1528865954.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:14.638Z,1528865954.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:14.655Z,1528865954.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:15.037Z,1528865955.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:15.055Z,1528865955.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:15.438Z,1528865955.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:15.456Z,1528865955.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:15.838Z,1528865955.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:15.856Z,1528865955.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:16.242Z,1528865956.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:16.264Z,1528865956.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:16.649Z,1528865956.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:16.667Z,1528865956.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:17.045Z,1528865957.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:17.068Z,1528865957.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:17.437Z,1528865957.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:17.455Z,1528865957.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:17.840Z,1528865957.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:17.858Z,1528865957.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:18.238Z,1528865958.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:18.260Z,1528865958.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:18.638Z,1528865958.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:18.655Z,1528865958.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:19.040Z,1528865959.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:19.058Z,1528865959.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:19.448Z,1528865959.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:19.466Z,1528865959.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:19.846Z,1528865959.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:19.868Z,1528865959.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:20.246Z,1528865960.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:20.263Z,1528865960.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:20.641Z,1528865960.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:20.658Z,1528865960.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:21.040Z,1528865961.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:21.058Z,1528865961.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:21.438Z,1528865961.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:21.456Z,1528865961.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:21.841Z,1528865961.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:21.859Z,1528865961.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:22.242Z,1528865962.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:22.264Z,1528865962.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:22.649Z,1528865962.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:22.667Z,1528865962.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:23.049Z,1528865963.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:23.072Z,1528865963.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:23.441Z,1528865963.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:23.458Z,1528865963.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:23.840Z,1528865963.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:23.858Z,1528865963.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:24.242Z,1528865964.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:24.259Z,1528865964.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:24.640Z,1528865964.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:24.664Z,1528865964.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:25.040Z,1528865965.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:25.058Z,1528865965.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:25.449Z,1528865965.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:25.467Z,1528865965.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:25.845Z,1528865965.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:25.863Z,1528865965.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:26.245Z,1528865966.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:26.263Z,1528865966.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:26.643Z,1528865966.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:26.661Z,1528865966.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:27.038Z,1528865967.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:27.056Z,1528865967.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:27.443Z,1528865967.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:27.460Z,1528865967.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:27.843Z,1528865967.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:27.861Z,1528865967.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:28.247Z,1528865968.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:28.266Z,1528865968.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:28.654Z,1528865968.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:28.672Z,1528865968.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:31.761Z,1528865971.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:31.800Z,1528865971.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:31.915Z,1528865971.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:31.946Z,1528865971.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:32.315Z,1528865972.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:32.352Z,1528865972.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:32.717Z,1528865972.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:32.746Z,1528865972.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:33.107Z,1528865973.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:33.147Z,1528865973.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:33.521Z,1528865973.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:33.556Z,1528865973.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:33.935Z,1528865973.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:33.953Z,1528865973.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:34.322Z,1528865974.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:34.355Z,1528865974.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:34.711Z,1528865974.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:34.738Z,1528865974.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:35.112Z,1528865975.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:35.146Z,1528865975.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:35.508Z,1528865975.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:35.526Z,1528865975.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:35.911Z,1528865975.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:35.929Z,1528865975.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:36.326Z,1528865976.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:36.366Z,1528865976.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:36.726Z,1528865976.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:36.760Z,1528865976.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:37.126Z,1528865977.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:37.160Z,1528865977.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:37.512Z,1528865977.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:37.531Z,1528865977.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:37.910Z,1528865977.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:37.928Z,1528865977.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:38.314Z,1528865978.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:38.332Z,1528865978.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:38.713Z,1528865978.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:38.736Z,1528865978.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:39.110Z,1528865979.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:39.128Z,1528865979.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:39.526Z,1528865979.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:39.563Z,1528865979.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:39.925Z,1528865979.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:39.959Z,1528865979.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:40.318Z,1528865980.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:40.335Z,1528865980.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:40.714Z,1528865980.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:40.732Z,1528865980.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:41.117Z,1528865981.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:41.135Z,1528865981.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:41.514Z,1528865981.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:41.532Z,1528865981.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:41.916Z,1528865981.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:41.934Z,1528865981.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:42.325Z,1528865982.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:42.343Z,1528865982.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:42.725Z,1528865982.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:42.743Z,1528865982.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:43.122Z,1528865983.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:43.140Z,1528865983.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:43.518Z,1528865983.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:43.536Z,1528865983.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:43.916Z,1528865983.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:43.934Z,1528865983.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:44.318Z,1528865984.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:44.340Z,1528865984.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:44.718Z,1528865984.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:44.736Z,1528865984.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:45.111Z,1528865985.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:45.140Z,1528865985.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:45.521Z,1528865985.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:45.539Z,1528865985.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:45.925Z,1528865985.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:45.964Z,1528865985.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:46.330Z,1528865986.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:46.365Z,1528865986.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:46.718Z,1528865986.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:46.736Z,1528865986.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:47.115Z,1528865987.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:47.133Z,1528865987.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:47.516Z,1528865987.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:47.547Z,1528865987.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:47.917Z,1528865987.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:47.934Z,1528865987.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:48.322Z,1528865988.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:48.341Z,1528865988.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:48.726Z,1528865988.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:48.744Z,1528865988.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:49.126Z,1528865989.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:49.144Z,1528865989.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:49.513Z,1528865989.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:49.532Z,1528865989.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:49.916Z,1528865989.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:49.935Z,1528865989.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:50.315Z,1528865990.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:50.333Z,1528865990.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:50.717Z,1528865990.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:50.735Z,1528865990.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:51.116Z,1528865991.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:51.134Z,1528865991.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:51.521Z,1528865991.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:51.539Z,1528865991.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:51.921Z,1528865991.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:51.938Z,1528865991.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:52.322Z,1528865992.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:52.339Z,1528865992.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:52.716Z,1528865992.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:52.733Z,1528865992.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:53.114Z,1528865993.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:53.132Z,1528865993.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:53.516Z,1528865993.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:53.536Z,1528865993.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:53.918Z,1528865993.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:53.936Z,1528865993.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:54.322Z,1528865994.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:54.344Z,1528865994.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:54.726Z,1528865994.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:54.743Z,1528865994.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:55.122Z,1528865995.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:55.144Z,1528865995.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:55.513Z,1528865995.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:55.531Z,1528865995.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:55.916Z,1528865995.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:55.938Z,1528865995.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:56.310Z,1528865996.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:56.334Z,1528865996.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:56.714Z,1528865996.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:56.736Z,1528865996.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:57.115Z,1528865997.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:57.138Z,1528865997.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:57.526Z,1528865997.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:57.543Z,1528865997.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:57.927Z,1528865997.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:57.945Z,1528865997.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:58.326Z,1528865998.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:58.343Z,1528865998.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:58.715Z,1528865998.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:58.738Z,1528865998.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:59.113Z,1528865999.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:59.130Z,1528865999.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:59.507Z,1528865999.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:59.549Z,1528865999.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T04:59:59.911Z,1528865999.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T04:59:59.948Z,1528865999.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:00.332Z,1528866000.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:00.349Z,1528866000.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:00.731Z,1528866000.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:00.749Z,1528866000.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:01.127Z,1528866001.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:01.145Z,1528866001.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:01.511Z,1528866001.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:01.618Z,1528866001.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:01.911Z,1528866001.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:01.945Z,1528866001.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:02.311Z,1528866002.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:02.328Z,1528866002.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:02.707Z,1528866002.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:02.732Z,1528866002.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:03.112Z,1528866003.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:03.130Z,1528866003.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:03.521Z,1528866003.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:03.557Z,1528866003.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:03.929Z,1528866003.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:03.956Z,1528866003.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:04.322Z,1528866004.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:04.356Z,1528866004.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:04.711Z,1528866004.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:04.746Z,1528866004.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:05.113Z,1528866005.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:05.136Z,1528866005.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:05.516Z,1528866005.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:05.533Z,1528866005.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:05.914Z,1528866005.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:05.931Z,1528866005.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:06.321Z,1528866006.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:06.339Z,1528866006.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:06.725Z,1528866006.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:06.763Z,1528866006.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:07.125Z,1528866007.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:07.143Z,1528866007.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:07.517Z,1528866007.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:07.535Z,1528866007.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:07.916Z,1528866007.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:07.933Z,1528866007.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:08.316Z,1528866008.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:08.334Z,1528866008.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:08.714Z,1528866008.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:08.732Z,1528866008.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:09.116Z,1528866009.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:09.134Z,1528866009.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:09.522Z,1528866009.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:09.540Z,1528866009.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:09.921Z,1528866009.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:09.944Z,1528866009.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:10.325Z,1528866010.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:10.343Z,1528866010.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:10.716Z,1528866010.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:10.734Z,1528866010.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:11.114Z,1528866011.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:11.136Z,1528866011.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:11.517Z,1528866011.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:11.535Z,1528866011.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:11.918Z,1528866011.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:11.936Z,1528866011.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:12.321Z,1528866012.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:12.344Z,1528866012.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:12.721Z,1528866012.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:12.739Z,1528866012.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:13.122Z,1528866013.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:13.140Z,1528866013.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:13.514Z,1528866013.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:13.531Z,1528866013.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:13.915Z,1528866013.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:13.940Z,1528866013.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:14.316Z,1528866014.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:14.335Z,1528866014.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:14.717Z,1528866014.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:14.735Z,1528866014.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:15.116Z,1528866015.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:15.135Z,1528866015.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:15.521Z,1528866015.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:15.540Z,1528866015.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:15.921Z,1528866015.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:15.939Z,1528866015.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:16.322Z,1528866016.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:16.341Z,1528866016.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:16.715Z,1528866016.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:16.733Z,1528866016.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:17.113Z,1528866017.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:17.130Z,1528866017.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:17.516Z,1528866017.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:17.534Z,1528866017.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:17.916Z,1528866017.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:17.934Z,1528866017.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:18.321Z,1528866018.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:18.339Z,1528866018.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:18.725Z,1528866018.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:18.743Z,1528866018.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:19.122Z,1528866019.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:19.140Z,1528866019.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:19.514Z,1528866019.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:19.531Z,1528866019.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:19.916Z,1528866019.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:19.934Z,1528866019.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:20.315Z,1528866020.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:20.332Z,1528866020.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:20.714Z,1528866020.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:20.736Z,1528866020.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:21.116Z,1528866021.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:21.134Z,1528866021.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:21.521Z,1528866021.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:21.539Z,1528866021.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:21.921Z,1528866021.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:21.938Z,1528866021.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:22.322Z,1528866022.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:22.339Z,1528866022.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:22.710Z,1528866022.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:22.740Z,1528866022.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:23.118Z,1528866023.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:23.135Z,1528866023.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:23.517Z,1528866023.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:23.535Z,1528866023.535 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:23.535Z,1528866023.535 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2018-06-13T05:00:23.535Z,1528866023.535 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:00:23.537Z,1528866023.537 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:23.537Z,1528866023.537 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32
2018-06-13T05:00:23.537Z,1528866023.537 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:00:23.539Z,1528866023.539 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:23.539Z,1528866023.539 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2018-06-13T05:00:23.539Z,1528866023.539 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:00:23.622Z,1528866023.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:00:23.622Z,1528866023.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:00:23.622Z,1528866023.622 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:00:23.914Z,1528866023.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:24.026Z,1528866024.026 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:00:24.026Z,1528866024.026 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2018-06-13T05:00:24.026Z,1528866024.026 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:00:24.026Z,1528866024.026 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32
2018-06-13T05:00:24.027Z,1528866024.027 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:00:24.027Z,1528866024.027 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2018-06-13T05:00:24.329Z,1528866024.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:24.345Z,1528866024.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:00:24.346Z,1528866024.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:00:24.346Z,1528866024.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:00:24.346Z,1528866024.346 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:00:24.347Z,1528866024.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:00:24.347Z,1528866024.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:00:24.347Z,1528866024.347 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:00:24.348Z,1528866024.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:00:24.348Z,1528866024.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:00:24.727Z,1528866024.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:24.745Z,1528866024.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:00:24.746Z,1528866024.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:25.128Z,1528866025.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:25.145Z,1528866025.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:00:25.146Z,1528866025.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:25.511Z,1528866025.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:25.539Z,1528866025.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:00:25.540Z,1528866025.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:25.922Z,1528866025.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:25.940Z,1528866025.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:00:25.941Z,1528866025.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:26.311Z,1528866026.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:26.345Z,1528866026.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:00:26.346Z,1528866026.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:26.712Z,1528866026.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:26.750Z,1528866026.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:00:26.751Z,1528866026.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:27.108Z,1528866027.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:27.145Z,1528866027.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:00:27.146Z,1528866027.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:27.522Z,1528866027.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:27.556Z,1528866027.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:00:27.557Z,1528866027.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:27.934Z,1528866027.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:27.951Z,1528866027.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:00:27.952Z,1528866027.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:28.322Z,1528866028.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:28.358Z,1528866028.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:00:28.358Z,1528866028.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:28.715Z,1528866028.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:28.748Z,1528866028.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:00:28.749Z,1528866028.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:29.111Z,1528866029.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:29.151Z,1528866029.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:00:29.151Z,1528866029.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:29.512Z,1528866029.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:29.549Z,1528866029.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:00:29.550Z,1528866029.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:29.915Z,1528866029.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:29.948Z,1528866029.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:00:29.953Z,1528866029.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:33.047Z,1528866033.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:33.065Z,1528866033.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T05:00:33.066Z,1528866033.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:33.203Z,1528866033.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:33.247Z,1528866033.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T05:00:33.248Z,1528866033.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:33.596Z,1528866033.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:33.614Z,1528866033.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T05:00:33.614Z,1528866033.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:33.979Z,1528866033.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:34.008Z,1528866034.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T05:00:34.009Z,1528866034.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:34.371Z,1528866034.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:34.408Z,1528866034.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T05:00:34.409Z,1528866034.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:34.776Z,1528866034.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:34.812Z,1528866034.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T05:00:34.813Z,1528866034.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:35.171Z,1528866035.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:35.208Z,1528866035.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T05:00:35.209Z,1528866035.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:35.587Z,1528866035.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:35.606Z,1528866035.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T05:00:35.607Z,1528866035.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:35.995Z,1528866035.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:36.013Z,1528866036.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T05:00:36.014Z,1528866036.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:36.392Z,1528866036.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:36.409Z,1528866036.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T05:00:36.410Z,1528866036.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:36.771Z,1528866036.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:36.808Z,1528866036.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T05:00:36.809Z,1528866036.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:37.175Z,1528866037.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:37.208Z,1528866037.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T05:00:37.209Z,1528866037.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:37.575Z,1528866037.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:37.607Z,1528866037.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T05:00:37.608Z,1528866037.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:37.971Z,1528866037.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:38.007Z,1528866038.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T05:00:38.008Z,1528866038.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:38.391Z,1528866038.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:38.409Z,1528866038.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T05:00:38.410Z,1528866038.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:38.792Z,1528866038.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:38.809Z,1528866038.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T05:00:38.810Z,1528866038.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:39.186Z,1528866039.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:39.215Z,1528866039.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T05:00:39.216Z,1528866039.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:39.579Z,1528866039.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:39.606Z,1528866039.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T05:00:39.607Z,1528866039.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:39.975Z,1528866039.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:40.003Z,1528866040.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T05:00:40.003Z,1528866040.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:40.375Z,1528866040.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:40.401Z,1528866040.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T05:00:40.402Z,1528866040.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:40.776Z,1528866040.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:40.815Z,1528866040.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T05:00:40.816Z,1528866040.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:41.171Z,1528866041.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:41.207Z,1528866041.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T05:00:41.208Z,1528866041.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:41.593Z,1528866041.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:41.610Z,1528866041.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T05:00:41.611Z,1528866041.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:41.995Z,1528866041.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:42.012Z,1528866042.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T05:00:42.013Z,1528866042.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:42.395Z,1528866042.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:42.412Z,1528866042.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T05:00:42.413Z,1528866042.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:42.771Z,1528866042.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:42.806Z,1528866042.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T05:00:42.807Z,1528866042.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:43.175Z,1528866043.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:43.201Z,1528866043.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T05:00:43.202Z,1528866043.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:43.572Z,1528866043.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:43.608Z,1528866043.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:43.971Z,1528866043.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:44.007Z,1528866044.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:44.396Z,1528866044.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:44.420Z,1528866044.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:44.795Z,1528866044.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:44.820Z,1528866044.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:45.186Z,1528866045.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:45.208Z,1528866045.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:45.575Z,1528866045.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:45.602Z,1528866045.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:45.975Z,1528866045.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:46.003Z,1528866046.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:46.372Z,1528866046.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:46.402Z,1528866046.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:46.775Z,1528866046.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:46.804Z,1528866046.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:47.175Z,1528866047.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:47.208Z,1528866047.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:47.587Z,1528866047.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:47.605Z,1528866047.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:47.995Z,1528866047.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:48.013Z,1528866048.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:48.388Z,1528866048.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:48.414Z,1528866048.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:48.771Z,1528866048.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:48.807Z,1528866048.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:49.179Z,1528866049.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:49.206Z,1528866049.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:49.576Z,1528866049.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:49.604Z,1528866049.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:49.971Z,1528866049.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:50.007Z,1528866050.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:50.391Z,1528866050.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:50.409Z,1528866050.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:50.792Z,1528866050.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:50.809Z,1528866050.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:51.186Z,1528866051.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:51.210Z,1528866051.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:51.575Z,1528866051.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:51.608Z,1528866051.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:51.975Z,1528866051.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:52.004Z,1528866052.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:52.375Z,1528866052.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:52.402Z,1528866052.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:52.776Z,1528866052.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:52.811Z,1528866052.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:53.171Z,1528866053.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:53.208Z,1528866053.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:53.591Z,1528866053.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:53.609Z,1528866053.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:53.995Z,1528866053.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:54.013Z,1528866054.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:54.395Z,1528866054.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:54.413Z,1528866054.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:54.771Z,1528866054.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:54.807Z,1528866054.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:55.175Z,1528866055.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:55.203Z,1528866055.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:55.575Z,1528866055.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:55.603Z,1528866055.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:55.971Z,1528866055.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:56.008Z,1528866056.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:56.396Z,1528866056.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:56.413Z,1528866056.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:56.795Z,1528866056.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:56.825Z,1528866056.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:57.186Z,1528866057.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:57.209Z,1528866057.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:57.575Z,1528866057.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:57.603Z,1528866057.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:57.972Z,1528866057.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:58.008Z,1528866058.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:58.371Z,1528866058.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:58.407Z,1528866058.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:58.776Z,1528866058.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:58.812Z,1528866058.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:59.175Z,1528866059.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:59.204Z,1528866059.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:59.592Z,1528866059.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:00:59.610Z,1528866059.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:00:59.996Z,1528866059.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:00.014Z,1528866060.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:00.391Z,1528866060.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:00.409Z,1528866060.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:00.771Z,1528866060.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:00.809Z,1528866060.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:01.175Z,1528866061.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:01.212Z,1528866061.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:01.575Z,1528866061.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:01.604Z,1528866061.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:01.975Z,1528866061.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:02.014Z,1528866062.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:02.385Z,1528866062.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:02.412Z,1528866062.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:02.789Z,1528866062.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:02.818Z,1528866062.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:03.186Z,1528866063.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:03.212Z,1528866063.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:03.575Z,1528866063.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:03.592Z,1528866063.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:03.975Z,1528866063.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:03.993Z,1528866063.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:04.371Z,1528866064.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:04.389Z,1528866064.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:04.776Z,1528866064.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:04.820Z,1528866064.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:05.175Z,1528866065.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:05.192Z,1528866065.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:05.585Z,1528866065.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:05.623Z,1528866065.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:05.993Z,1528866065.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:06.028Z,1528866066.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:06.393Z,1528866066.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:06.421Z,1528866066.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:06.779Z,1528866066.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:06.796Z,1528866066.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:07.178Z,1528866067.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:07.200Z,1528866067.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:07.579Z,1528866067.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:07.596Z,1528866067.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:07.975Z,1528866067.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:07.993Z,1528866067.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:08.389Z,1528866068.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:08.423Z,1528866068.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:08.789Z,1528866068.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:08.806Z,1528866068.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:09.182Z,1528866069.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:09.199Z,1528866069.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:09.582Z,1528866069.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:09.608Z,1528866069.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:09.982Z,1528866069.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:09.999Z,1528866069.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:10.375Z,1528866070.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:10.408Z,1528866070.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:10.780Z,1528866070.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:10.804Z,1528866070.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:11.182Z,1528866071.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:11.199Z,1528866071.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:11.583Z,1528866071.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:11.602Z,1528866071.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:11.990Z,1528866071.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:12.008Z,1528866072.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:12.385Z,1528866072.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:12.403Z,1528866072.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:12.775Z,1528866072.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:12.798Z,1528866072.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:13.181Z,1528866073.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:13.200Z,1528866073.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:13.581Z,1528866073.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:13.599Z,1528866073.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:13.976Z,1528866073.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:13.994Z,1528866073.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:14.386Z,1528866074.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:14.405Z,1528866074.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:14.785Z,1528866074.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:14.802Z,1528866074.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:15.183Z,1528866075.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:15.200Z,1528866075.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:15.585Z,1528866075.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:15.603Z,1528866075.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:15.980Z,1528866075.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:15.998Z,1528866075.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:16.378Z,1528866076.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:16.397Z,1528866076.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:16.779Z,1528866076.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:16.797Z,1528866076.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:17.181Z,1528866077.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:17.199Z,1528866077.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:17.582Z,1528866077.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:17.604Z,1528866077.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:17.989Z,1528866077.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:18.007Z,1528866078.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:18.388Z,1528866078.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:18.405Z,1528866078.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:18.775Z,1528866078.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:18.797Z,1528866078.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:19.181Z,1528866079.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:19.199Z,1528866079.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:19.578Z,1528866079.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:19.595Z,1528866079.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:19.975Z,1528866079.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:20.006Z,1528866080.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:20.385Z,1528866080.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:20.403Z,1528866080.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:20.789Z,1528866080.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:20.806Z,1528866080.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:21.182Z,1528866081.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:21.234Z,1528866081.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:21.581Z,1528866081.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:21.599Z,1528866081.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:21.978Z,1528866081.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:21.995Z,1528866081.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:22.375Z,1528866082.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:22.398Z,1528866082.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:22.779Z,1528866082.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:22.810Z,1528866082.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:23.181Z,1528866083.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:23.199Z,1528866083.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:23.586Z,1528866083.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:23.604Z,1528866083.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:23.989Z,1528866083.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:24.007Z,1528866084.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:24.387Z,1528866084.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:24.404Z,1528866084.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:24.781Z,1528866084.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:24.804Z,1528866084.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:25.179Z,1528866085.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:25.201Z,1528866085.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:25.583Z,1528866085.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:25.600Z,1528866085.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:25.975Z,1528866085.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:26.012Z,1528866086.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:26.389Z,1528866086.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:26.407Z,1528866086.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:26.789Z,1528866086.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:26.806Z,1528866086.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:27.186Z,1528866087.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:27.231Z,1528866087.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:27.581Z,1528866087.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:27.599Z,1528866087.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:27.981Z,1528866087.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:27.000Z,1528866088.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:28.003Z,1528866088.003 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T05:01:28.003Z,1528866088.003 [Default:CheckIn:C.Wait] Stopped
2018-06-13T05:01:28.003Z,1528866088.003 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T05:01:28.003Z,1528866088.003 [Default:CheckIn:D] Running Loop=1
2018-06-13T05:01:28.381Z,1528866088.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:28.399Z,1528866088.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:28.402Z,1528866088.402 [Default:CheckIn:D] Stopped
2018-06-13T05:01:28.402Z,1528866088.402 [Default:CheckIn:E] Running Loop=1
2018-06-13T05:01:28.786Z,1528866088.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:28.803Z,1528866088.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:28.807Z,1528866088.807 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 94.249284 min 
2018-06-13T05:01:28.807Z,1528866088.807 [Default:CheckIn:E] Stopped
2018-06-13T05:01:28.807Z,1528866088.807 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T05:01:28.807Z,1528866088.807 [Default:CheckIn] Stopped
2018-06-13T05:01:28.807Z,1528866088.807 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T05:01:28.808Z,1528866088.808 [Default:CheckIn](INFO): Running loop #10
2018-06-13T05:01:28.808Z,1528866088.808 [Default:CheckIn] Running Loop=10
2018-06-13T05:01:28.808Z,1528866088.808 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T05:01:28.808Z,1528866088.808 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T05:01:29.175Z,1528866089.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:29.211Z,1528866089.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:29.591Z,1528866089.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:29.609Z,1528866089.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:29.998Z,1528866089.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:30.021Z,1528866090.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:33.098Z,1528866093.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:33.121Z,1528866093.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:33.267Z,1528866093.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:33.304Z,1528866093.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:33.668Z,1528866093.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:33.702Z,1528866093.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:34.068Z,1528866094.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:34.104Z,1528866094.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:34.474Z,1528866094.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:34.501Z,1528866094.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:34.878Z,1528866094.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:34.911Z,1528866094.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:35.278Z,1528866095.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:35.306Z,1528866095.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:35.659Z,1528866095.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:35.677Z,1528866095.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:36.063Z,1528866096.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:36.103Z,1528866096.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:36.463Z,1528866096.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:36.480Z,1528866096.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:36.860Z,1528866096.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:36.878Z,1528866096.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:37.263Z,1528866097.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:37.308Z,1528866097.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:37.677Z,1528866097.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:37.712Z,1528866097.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:38.082Z,1528866098.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:38.111Z,1528866098.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:38.478Z,1528866098.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:38.511Z,1528866098.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:38.867Z,1528866098.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:38.884Z,1528866098.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:39.295Z,1528866099.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:39.322Z,1528866099.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:39.668Z,1528866099.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:39.686Z,1528866099.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:40.066Z,1528866100.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:40.088Z,1528866100.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:40.478Z,1528866100.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:40.512Z,1528866100.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:40.878Z,1528866100.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:40.895Z,1528866100.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:41.277Z,1528866101.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:41.300Z,1528866101.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:41.666Z,1528866101.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:41.684Z,1528866101.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:42.062Z,1528866102.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:42.084Z,1528866102.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:42.470Z,1528866102.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:42.488Z,1528866102.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:42.863Z,1528866102.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:42.888Z,1528866102.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:43.268Z,1528866103.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:43.286Z,1528866103.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:43.643Z,1528866103.643 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T05:01:43.643Z,1528866103.643 [NAL9602] Data Fault, FailCount= 4
2018-06-13T05:01:43.643Z,1528866103.643 [NAL9602](ERROR): Data Fault
2018-06-13T05:01:43.664Z,1528866103.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:43.712Z,1528866103.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:43.789Z,1528866103.789 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T05:01:44.042Z,1528866104.042 [NAL9602](INFO): Powering down
2018-06-13T05:01:44.067Z,1528866104.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:44.093Z,1528866104.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:44.467Z,1528866104.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:44.500Z,1528866104.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:44.863Z,1528866104.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:44.892Z,1528866104.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:44.970Z,1528866104.970 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T05:01:44.970Z,1528866104.970 [NAL9602] No Fault, FailCount= 4
2018-06-13T05:01:45.259Z,1528866105.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:45.295Z,1528866105.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:45.663Z,1528866105.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:45.691Z,1528866105.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:46.062Z,1528866106.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:46.097Z,1528866106.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:46.458Z,1528866106.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:46.487Z,1528866106.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:46.862Z,1528866106.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:46.890Z,1528866106.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:47.263Z,1528866107.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:47.296Z,1528866107.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:47.658Z,1528866107.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:47.688Z,1528866107.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:48.062Z,1528866108.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:48.089Z,1528866108.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:48.462Z,1528866108.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:48.501Z,1528866108.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:48.858Z,1528866108.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:48.888Z,1528866108.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:49.262Z,1528866109.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:49.289Z,1528866109.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:49.662Z,1528866109.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:49.692Z,1528866109.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:50.062Z,1528866110.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:50.090Z,1528866110.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:50.463Z,1528866110.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:50.490Z,1528866110.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:50.862Z,1528866110.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:50.891Z,1528866110.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:51.258Z,1528866111.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:51.292Z,1528866111.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:51.662Z,1528866111.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:51.699Z,1528866111.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:52.061Z,1528866112.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:52.096Z,1528866112.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:52.463Z,1528866112.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:52.495Z,1528866112.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:52.862Z,1528866112.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:52.895Z,1528866112.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:53.261Z,1528866113.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:53.296Z,1528866113.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:53.662Z,1528866113.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:53.695Z,1528866113.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:54.062Z,1528866114.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:54.095Z,1528866114.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:54.462Z,1528866114.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:54.500Z,1528866114.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:54.858Z,1528866114.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:54.884Z,1528866114.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:55.263Z,1528866115.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:55.301Z,1528866115.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:55.662Z,1528866115.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:55.700Z,1528866115.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:56.058Z,1528866116.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:56.103Z,1528866116.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:56.462Z,1528866116.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:56.505Z,1528866116.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:56.859Z,1528866116.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:56.877Z,1528866116.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:57.263Z,1528866117.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:57.282Z,1528866117.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:57.663Z,1528866117.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:57.680Z,1528866117.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:58.060Z,1528866118.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:58.079Z,1528866118.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:58.466Z,1528866118.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:58.484Z,1528866118.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:58.866Z,1528866118.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:58.884Z,1528866118.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:59.261Z,1528866119.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:59.280Z,1528866119.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:01:59.665Z,1528866119.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:01:59.684Z,1528866119.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:00.062Z,1528866120.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:00.080Z,1528866120.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:00.465Z,1528866120.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:00.483Z,1528866120.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:00.866Z,1528866120.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:00.884Z,1528866120.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:01.265Z,1528866121.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:01.282Z,1528866121.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:01.661Z,1528866121.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:01.678Z,1528866121.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:02.066Z,1528866122.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:02.084Z,1528866122.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:02.465Z,1528866122.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:02.482Z,1528866122.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:02.865Z,1528866122.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:02.883Z,1528866122.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:03.266Z,1528866123.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:03.283Z,1528866123.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:03.666Z,1528866123.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:03.683Z,1528866123.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:04.064Z,1528866124.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:04.082Z,1528866124.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:04.466Z,1528866124.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:04.484Z,1528866124.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:04.863Z,1528866124.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:04.888Z,1528866124.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:05.263Z,1528866125.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:05.281Z,1528866125.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:05.666Z,1528866125.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:05.683Z,1528866125.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:06.065Z,1528866126.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:06.083Z,1528866126.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:06.463Z,1528866126.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:06.481Z,1528866126.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:06.866Z,1528866126.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:06.888Z,1528866126.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:07.265Z,1528866127.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:07.282Z,1528866127.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:07.664Z,1528866127.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:07.681Z,1528866127.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:08.066Z,1528866128.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:08.084Z,1528866128.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:08.465Z,1528866128.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:08.483Z,1528866128.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:08.865Z,1528866128.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:08.883Z,1528866128.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:09.266Z,1528866129.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:09.283Z,1528866129.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:09.665Z,1528866129.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:09.682Z,1528866129.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:10.064Z,1528866130.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:10.081Z,1528866130.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:10.466Z,1528866130.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:10.483Z,1528866130.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:10.866Z,1528866130.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:10.883Z,1528866130.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:11.263Z,1528866131.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:11.280Z,1528866131.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:11.666Z,1528866131.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:11.684Z,1528866131.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:12.064Z,1528866132.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:12.081Z,1528866132.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:12.463Z,1528866132.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:12.481Z,1528866132.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:12.866Z,1528866132.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:12.883Z,1528866132.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:13.266Z,1528866133.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:13.283Z,1528866133.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:13.664Z,1528866133.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:13.682Z,1528866133.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:14.049Z,1528866134.049 [NAL9602](INFO): Powering up NAL9602
2018-06-13T05:02:14.066Z,1528866134.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:14.088Z,1528866134.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:14.466Z,1528866134.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:14.483Z,1528866134.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:14.866Z,1528866134.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:14.883Z,1528866134.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:15.266Z,1528866135.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:15.283Z,1528866135.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:15.666Z,1528866135.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:15.684Z,1528866135.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:16.063Z,1528866136.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:16.081Z,1528866136.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:16.466Z,1528866136.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:16.484Z,1528866136.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:16.865Z,1528866136.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:16.882Z,1528866136.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:17.265Z,1528866137.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:17.282Z,1528866137.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:17.666Z,1528866137.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:17.684Z,1528866137.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:18.065Z,1528866138.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:18.083Z,1528866138.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:18.465Z,1528866138.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:18.482Z,1528866138.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:18.866Z,1528866138.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:18.884Z,1528866138.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:19.266Z,1528866139.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:19.283Z,1528866139.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:19.663Z,1528866139.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:19.681Z,1528866139.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:20.066Z,1528866140.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:20.084Z,1528866140.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:20.466Z,1528866140.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:20.484Z,1528866140.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:20.865Z,1528866140.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:20.883Z,1528866140.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:21.265Z,1528866141.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:21.283Z,1528866141.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:21.665Z,1528866141.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:21.683Z,1528866141.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:22.064Z,1528866142.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:22.081Z,1528866142.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:22.466Z,1528866142.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:22.484Z,1528866142.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:22.866Z,1528866142.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:22.883Z,1528866142.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:23.266Z,1528866143.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:23.283Z,1528866143.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:23.669Z,1528866143.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:23.687Z,1528866143.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:24.069Z,1528866144.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:24.086Z,1528866144.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:24.464Z,1528866144.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:24.482Z,1528866144.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:24.878Z,1528866144.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:24.896Z,1528866144.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:25.246Z,1528866145.246 [NAL9602](INFO): NAL9602 initialized
2018-06-13T05:02:25.274Z,1528866145.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:25.291Z,1528866145.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:25.665Z,1528866145.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:25.683Z,1528866145.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:26.077Z,1528866146.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:26.100Z,1528866146.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:26.477Z,1528866146.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:26.495Z,1528866146.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:26.873Z,1528866146.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:26.896Z,1528866146.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:27.268Z,1528866147.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:27.289Z,1528866147.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:27.668Z,1528866147.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:27.692Z,1528866147.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:28.070Z,1528866148.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:28.087Z,1528866148.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:28.470Z,1528866148.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:28.488Z,1528866148.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:28.881Z,1528866148.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:28.899Z,1528866148.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:31.981Z,1528866151.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:31.000Z,1528866152.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:32.149Z,1528866152.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:32.180Z,1528866152.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:32.535Z,1528866152.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:32.552Z,1528866152.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:32.940Z,1528866152.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:32.982Z,1528866152.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:33.336Z,1528866153.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:33.353Z,1528866153.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:33.745Z,1528866153.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:33.780Z,1528866153.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:34.141Z,1528866154.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:34.158Z,1528866154.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:34.545Z,1528866154.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:34.563Z,1528866154.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:34.936Z,1528866154.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:34.954Z,1528866154.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:35.333Z,1528866155.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:35.351Z,1528866155.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:35.745Z,1528866155.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:35.763Z,1528866155.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:36.145Z,1528866156.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:36.163Z,1528866156.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:36.541Z,1528866156.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:36.564Z,1528866156.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:36.936Z,1528866156.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:36.954Z,1528866156.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:37.334Z,1528866157.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:37.352Z,1528866157.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:37.741Z,1528866157.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:37.764Z,1528866157.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:38.153Z,1528866158.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:38.187Z,1528866158.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:38.542Z,1528866158.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:38.560Z,1528866158.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:38.934Z,1528866158.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:38.956Z,1528866158.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:39.337Z,1528866159.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:39.355Z,1528866159.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:39.742Z,1528866159.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:39.760Z,1528866159.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:40.145Z,1528866160.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:40.162Z,1528866160.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:40.546Z,1528866160.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:40.563Z,1528866160.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:40.938Z,1528866160.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:40.956Z,1528866160.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:41.335Z,1528866161.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:41.352Z,1528866161.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:41.745Z,1528866161.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:41.764Z,1528866161.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:42.145Z,1528866162.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:42.164Z,1528866162.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:42.544Z,1528866162.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:42.561Z,1528866162.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:42.936Z,1528866162.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:42.954Z,1528866162.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:43.338Z,1528866163.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:43.355Z,1528866163.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:43.744Z,1528866163.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:43.768Z,1528866163.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:44.143Z,1528866164.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:44.160Z,1528866164.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:44.543Z,1528866164.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:44.560Z,1528866164.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:44.940Z,1528866164.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:44.957Z,1528866164.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:45.331Z,1528866165.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:45.355Z,1528866165.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:45.743Z,1528866165.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:45.768Z,1528866165.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:46.146Z,1528866166.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:46.163Z,1528866166.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:46.543Z,1528866166.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:46.561Z,1528866166.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:46.935Z,1528866166.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:46.959Z,1528866166.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:47.338Z,1528866167.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:47.355Z,1528866167.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:47.742Z,1528866167.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:47.765Z,1528866167.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:48.150Z,1528866168.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:48.173Z,1528866168.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:48.548Z,1528866168.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:48.565Z,1528866168.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:48.928Z,1528866168.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:48.959Z,1528866168.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:49.335Z,1528866169.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:49.365Z,1528866169.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:49.752Z,1528866169.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:49.770Z,1528866169.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:50.147Z,1528866170.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:50.165Z,1528866170.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:50.547Z,1528866170.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:50.565Z,1528866170.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:50.928Z,1528866170.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:50.956Z,1528866170.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:51.327Z,1528866171.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:51.354Z,1528866171.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:51.749Z,1528866171.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:51.767Z,1528866171.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:52.152Z,1528866172.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:52.169Z,1528866172.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:52.544Z,1528866172.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:52.561Z,1528866172.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:52.930Z,1528866172.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:52.967Z,1528866172.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:53.327Z,1528866173.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:53.355Z,1528866173.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:53.743Z,1528866173.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:53.773Z,1528866173.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:54.151Z,1528866174.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:54.168Z,1528866174.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:54.552Z,1528866174.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:54.570Z,1528866174.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:54.932Z,1528866174.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:54.964Z,1528866174.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:55.331Z,1528866175.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:55.365Z,1528866175.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:55.753Z,1528866175.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:55.771Z,1528866175.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:56.141Z,1528866176.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:56.175Z,1528866176.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:56.542Z,1528866176.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:56.579Z,1528866176.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:56.932Z,1528866176.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:56.969Z,1528866176.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:57.327Z,1528866177.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:57.367Z,1528866177.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:57.741Z,1528866177.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:57.768Z,1528866177.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:58.141Z,1528866178.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:58.169Z,1528866178.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:58.541Z,1528866178.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:58.570Z,1528866178.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:58.932Z,1528866178.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:58.967Z,1528866178.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:59.331Z,1528866179.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:59.370Z,1528866179.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:02:59.738Z,1528866179.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:02:59.765Z,1528866179.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:00.151Z,1528866180.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:00.169Z,1528866180.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:00.541Z,1528866180.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:00.579Z,1528866180.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:00.932Z,1528866180.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:00.966Z,1528866180.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:01.331Z,1528866181.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:01.369Z,1528866181.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:01.745Z,1528866181.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:01.773Z,1528866181.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:02.145Z,1528866182.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:02.172Z,1528866182.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:02.541Z,1528866182.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:02.579Z,1528866182.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:02.935Z,1528866182.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:02.952Z,1528866182.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:03.334Z,1528866183.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:03.353Z,1528866183.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:03.745Z,1528866183.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:03.778Z,1528866183.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:04.145Z,1528866184.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:04.178Z,1528866184.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:04.545Z,1528866184.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:04.578Z,1528866184.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:04.934Z,1528866184.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:04.956Z,1528866184.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:05.330Z,1528866185.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:05.348Z,1528866185.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:05.732Z,1528866185.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:05.750Z,1528866185.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:06.149Z,1528866186.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:06.182Z,1528866186.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:06.541Z,1528866186.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:06.582Z,1528866186.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:06.938Z,1528866186.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:06.955Z,1528866186.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:07.334Z,1528866187.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:07.356Z,1528866187.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:07.734Z,1528866187.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:07.752Z,1528866187.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:08.135Z,1528866188.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:08.153Z,1528866188.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:08.535Z,1528866188.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:08.552Z,1528866188.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:08.945Z,1528866188.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:08.986Z,1528866188.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:09.342Z,1528866189.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:09.360Z,1528866189.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:09.746Z,1528866189.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:09.780Z,1528866189.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:10.134Z,1528866190.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:10.152Z,1528866190.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:10.531Z,1528866190.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:10.554Z,1528866190.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:10.936Z,1528866190.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:10.954Z,1528866190.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:11.335Z,1528866191.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:11.353Z,1528866191.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:11.731Z,1528866191.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:11.753Z,1528866191.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:12.141Z,1528866192.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:12.160Z,1528866192.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:12.541Z,1528866192.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:12.558Z,1528866192.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:12.946Z,1528866192.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:12.963Z,1528866192.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:13.336Z,1528866193.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:13.354Z,1528866193.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:13.737Z,1528866193.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:13.754Z,1528866193.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:14.134Z,1528866194.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:14.152Z,1528866194.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:14.536Z,1528866194.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:14.554Z,1528866194.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:14.942Z,1528866194.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:14.959Z,1528866194.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:15.345Z,1528866195.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:15.363Z,1528866195.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:15.742Z,1528866195.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:15.759Z,1528866195.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:16.137Z,1528866196.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:16.154Z,1528866196.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:16.531Z,1528866196.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:16.565Z,1528866196.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:16.937Z,1528866196.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:16.955Z,1528866196.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:17.333Z,1528866197.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:17.351Z,1528866197.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:17.731Z,1528866197.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:17.756Z,1528866197.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:18.149Z,1528866198.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:18.167Z,1528866198.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:18.545Z,1528866198.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:18.562Z,1528866198.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:18.942Z,1528866198.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:18.968Z,1528866198.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:19.335Z,1528866199.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:19.358Z,1528866199.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:19.734Z,1528866199.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:19.753Z,1528866199.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:20.128Z,1528866200.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:20.169Z,1528866200.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:20.542Z,1528866200.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:20.564Z,1528866200.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:20.951Z,1528866200.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:20.969Z,1528866200.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:21.348Z,1528866201.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:21.372Z,1528866201.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:21.747Z,1528866201.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:21.766Z,1528866201.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:22.128Z,1528866202.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:22.155Z,1528866202.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:22.528Z,1528866202.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:22.560Z,1528866202.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:22.938Z,1528866202.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:22.956Z,1528866202.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:23.327Z,1528866203.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:23.365Z,1528866203.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:23.727Z,1528866203.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:23.760Z,1528866203.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:24.148Z,1528866204.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:24.166Z,1528866204.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:24.549Z,1528866204.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:24.567Z,1528866204.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:24.567Z,1528866204.567 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2018-06-13T05:03:24.567Z,1528866204.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:03:24.569Z,1528866204.569 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:24.569Z,1528866204.569 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33
2018-06-13T05:03:24.569Z,1528866204.569 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:03:24.571Z,1528866204.571 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:24.571Z,1528866204.571 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2018-06-13T05:03:24.571Z,1528866204.571 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:03:24.649Z,1528866204.649 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:03:24.649Z,1528866204.649 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:03:24.650Z,1528866204.650 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:03:24.945Z,1528866204.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:25.049Z,1528866205.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:03:25.049Z,1528866205.049 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2018-06-13T05:03:25.050Z,1528866205.050 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:03:25.050Z,1528866205.050 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33
2018-06-13T05:03:25.050Z,1528866205.050 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:03:25.050Z,1528866205.050 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2018-06-13T05:03:25.327Z,1528866205.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:25.355Z,1528866205.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:03:25.356Z,1528866205.356 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:03:25.356Z,1528866205.356 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:03:25.356Z,1528866205.356 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:03:25.361Z,1528866205.361 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:03:25.361Z,1528866205.361 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:03:25.362Z,1528866205.362 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:03:25.362Z,1528866205.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:03:25.362Z,1528866205.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:03:25.731Z,1528866205.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:25.748Z,1528866205.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:03:25.762Z,1528866205.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:26.128Z,1528866206.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:26.152Z,1528866206.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:03:26.152Z,1528866206.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:26.535Z,1528866206.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:26.553Z,1528866206.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:03:26.554Z,1528866206.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:26.945Z,1528866206.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:26.986Z,1528866206.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:03:26.987Z,1528866206.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:27.341Z,1528866207.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:27.359Z,1528866207.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:03:27.359Z,1528866207.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:27.745Z,1528866207.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:27.763Z,1528866207.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:03:27.764Z,1528866207.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:28.138Z,1528866208.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:28.155Z,1528866208.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:03:28.156Z,1528866208.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:28.537Z,1528866208.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:28.554Z,1528866208.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:03:28.555Z,1528866208.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:28.940Z,1528866208.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:28.958Z,1528866208.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:03:28.959Z,1528866208.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:32.044Z,1528866212.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:32.061Z,1528866212.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T05:03:32.062Z,1528866212.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:32.175Z,1528866212.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:32.206Z,1528866212.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:03:32.207Z,1528866212.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:32.591Z,1528866212.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:32.616Z,1528866212.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:03:32.617Z,1528866212.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:32.996Z,1528866212.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:33.014Z,1528866213.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:03:33.014Z,1528866213.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:33.388Z,1528866213.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:33.406Z,1528866213.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:03:33.407Z,1528866213.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:33.771Z,1528866213.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:33.804Z,1528866213.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:03:33.805Z,1528866213.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:34.167Z,1528866214.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:34.205Z,1528866214.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:03:34.206Z,1528866214.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:34.567Z,1528866214.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:34.603Z,1528866214.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:03:34.604Z,1528866214.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:34.984Z,1528866214.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:35.002Z,1528866215.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:03:35.003Z,1528866215.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:35.392Z,1528866215.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:35.410Z,1528866215.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:03:35.410Z,1528866215.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:35.781Z,1528866215.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:35.804Z,1528866215.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:03:35.806Z,1528866215.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:36.171Z,1528866216.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:36.204Z,1528866216.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:03:36.205Z,1528866216.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:36.567Z,1528866216.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:36.604Z,1528866216.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:03:36.605Z,1528866216.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:36.967Z,1528866216.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:37.004Z,1528866217.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:03:37.004Z,1528866217.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:37.372Z,1528866217.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:37.413Z,1528866217.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T05:03:37.414Z,1528866217.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:37.767Z,1528866217.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:37.804Z,1528866217.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T05:03:37.805Z,1528866217.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:38.187Z,1528866218.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:38.206Z,1528866218.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T05:03:38.207Z,1528866218.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:38.591Z,1528866218.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:38.609Z,1528866218.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:03:38.610Z,1528866218.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:38.987Z,1528866218.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:39.005Z,1528866219.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:03:39.006Z,1528866219.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:39.367Z,1528866219.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:39.404Z,1528866219.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:03:39.406Z,1528866219.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:39.771Z,1528866219.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:39.804Z,1528866219.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:03:39.805Z,1528866219.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:40.172Z,1528866220.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:40.216Z,1528866220.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:03:40.217Z,1528866220.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:40.567Z,1528866220.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:40.600Z,1528866220.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:03:40.606Z,1528866220.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:40.981Z,1528866220.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:41.016Z,1528866221.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:03:41.017Z,1528866221.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:41.409Z,1528866221.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:03:41.410Z,1528866221.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:41.807Z,1528866221.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:03:41.808Z,1528866221.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:42.209Z,1528866222.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:03:42.210Z,1528866222.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:42.610Z,1528866222.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:03:42.611Z,1528866222.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:42.984Z,1528866222.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:03:43.001Z,1528866223.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:43.386Z,1528866223.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:03:43.387Z,1528866223.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:43.791Z,1528866223.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:03:43.792Z,1528866223.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:44.214Z,1528866224.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:03:44.215Z,1528866224.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:44.616Z,1528866224.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:45.021Z,1528866225.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:45.396Z,1528866225.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:45.796Z,1528866225.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:46.200Z,1528866226.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:46.587Z,1528866226.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:47.023Z,1528866227.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:47.426Z,1528866227.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:47.799Z,1528866227.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:48.192Z,1528866228.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:48.596Z,1528866228.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:48.993Z,1528866228.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:49.393Z,1528866229.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:49.778Z,1528866229.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:49.801Z,1528866229.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:50.182Z,1528866230.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:50.200Z,1528866230.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:50.585Z,1528866230.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:50.604Z,1528866230.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:50.986Z,1528866230.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:51.006Z,1528866231.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:51.371Z,1528866231.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:51.398Z,1528866231.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:51.775Z,1528866231.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:51.806Z,1528866231.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:52.179Z,1528866232.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:52.198Z,1528866232.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:52.577Z,1528866232.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:52.595Z,1528866232.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:52.986Z,1528866232.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:53.005Z,1528866233.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:53.386Z,1528866233.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:53.405Z,1528866233.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:53.787Z,1528866233.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:53.806Z,1528866233.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:54.170Z,1528866234.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:54.203Z,1528866234.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:54.578Z,1528866234.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:54.601Z,1528866234.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:54.971Z,1528866234.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:54.994Z,1528866234.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:55.375Z,1528866235.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:55.399Z,1528866235.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:55.775Z,1528866235.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:55.810Z,1528866235.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:56.183Z,1528866236.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:56.202Z,1528866236.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:56.590Z,1528866236.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:56.608Z,1528866236.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:56.991Z,1528866236.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:57.009Z,1528866237.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:57.376Z,1528866237.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:57.395Z,1528866237.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:57.776Z,1528866237.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:57.794Z,1528866237.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:58.178Z,1528866238.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:58.196Z,1528866238.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:58.582Z,1528866238.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:58.604Z,1528866238.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:58.986Z,1528866238.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:59.005Z,1528866239.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:59.391Z,1528866239.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:59.410Z,1528866239.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:03:59.784Z,1528866239.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:03:59.802Z,1528866239.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:00.182Z,1528866240.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:00.205Z,1528866240.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:00.578Z,1528866240.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:00.598Z,1528866240.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:00.977Z,1528866240.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:00.995Z,1528866240.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:01.375Z,1528866241.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:01.401Z,1528866241.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:01.778Z,1528866241.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:01.801Z,1528866241.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:02.188Z,1528866242.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:02.206Z,1528866242.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:02.591Z,1528866242.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:02.610Z,1528866242.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:02.988Z,1528866242.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:03.012Z,1528866243.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:03.383Z,1528866243.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:03.402Z,1528866243.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:03.783Z,1528866243.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:03.801Z,1528866243.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:04.179Z,1528866244.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:04.206Z,1528866244.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:04.571Z,1528866244.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:04.608Z,1528866244.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:04.993Z,1528866244.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:05.016Z,1528866245.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:05.398Z,1528866245.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:05.416Z,1528866245.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:05.792Z,1528866245.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:05.816Z,1528866245.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:06.171Z,1528866246.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:06.199Z,1528866246.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:06.575Z,1528866246.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:06.604Z,1528866246.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:06.975Z,1528866246.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:07.003Z,1528866247.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:07.372Z,1528866247.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:07.400Z,1528866247.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:07.771Z,1528866247.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:07.799Z,1528866247.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:08.192Z,1528866248.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:08.217Z,1528866248.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:08.595Z,1528866248.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:08.621Z,1528866248.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:08.991Z,1528866248.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:09.009Z,1528866249.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:09.371Z,1528866249.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:09.399Z,1528866249.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:09.774Z,1528866249.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:09.805Z,1528866249.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:10.172Z,1528866250.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:10.202Z,1528866250.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:10.575Z,1528866250.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:10.605Z,1528866250.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:10.988Z,1528866250.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:11.006Z,1528866251.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:11.391Z,1528866251.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:11.409Z,1528866251.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:11.791Z,1528866251.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:11.810Z,1528866251.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:12.171Z,1528866252.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:12.199Z,1528866252.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:12.571Z,1528866252.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:12.599Z,1528866252.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:12.975Z,1528866252.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:13.003Z,1528866253.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:13.376Z,1528866253.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:13.405Z,1528866253.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:13.775Z,1528866253.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:13.803Z,1528866253.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:14.191Z,1528866254.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:14.210Z,1528866254.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:14.592Z,1528866254.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:14.610Z,1528866254.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:14.993Z,1528866254.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:15.011Z,1528866255.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:15.371Z,1528866255.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:15.399Z,1528866255.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:15.775Z,1528866255.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:15.811Z,1528866255.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:16.170Z,1528866256.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:16.200Z,1528866256.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:16.574Z,1528866256.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:16.602Z,1528866256.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:16.992Z,1528866256.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:17.016Z,1528866257.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:17.391Z,1528866257.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:17.409Z,1528866257.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:17.794Z,1528866257.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:17.816Z,1528866257.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:18.174Z,1528866258.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:18.208Z,1528866258.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:18.573Z,1528866258.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:18.602Z,1528866258.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:18.975Z,1528866258.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:19.003Z,1528866259.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:19.374Z,1528866259.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:19.404Z,1528866259.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:19.774Z,1528866259.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:19.803Z,1528866259.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:20.195Z,1528866260.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:20.214Z,1528866260.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:20.595Z,1528866260.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:20.614Z,1528866260.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:20.990Z,1528866260.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:21.008Z,1528866261.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:21.374Z,1528866261.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:21.401Z,1528866261.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:21.774Z,1528866261.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:21.803Z,1528866261.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:22.175Z,1528866262.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:22.204Z,1528866262.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:22.576Z,1528866262.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:22.607Z,1528866262.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:22.989Z,1528866262.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:23.007Z,1528866263.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:23.392Z,1528866263.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:23.410Z,1528866263.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:23.791Z,1528866263.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:23.810Z,1528866263.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:24.171Z,1528866264.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:24.203Z,1528866264.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:24.575Z,1528866264.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:24.613Z,1528866264.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:24.974Z,1528866264.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:25.013Z,1528866265.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:25.374Z,1528866265.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:25.402Z,1528866265.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:25.771Z,1528866265.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:25.804Z,1528866265.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:26.190Z,1528866266.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:26.224Z,1528866266.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:26.593Z,1528866266.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:26.616Z,1528866266.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:26.980Z,1528866266.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:27.008Z,1528866267.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:27.371Z,1528866267.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:27.410Z,1528866267.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:27.767Z,1528866267.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:27.810Z,1528866267.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:28.170Z,1528866268.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:28.210Z,1528866268.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:28.578Z,1528866268.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:28.607Z,1528866268.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:28.996Z,1528866268.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:29.014Z,1528866269.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:32.121Z,1528866272.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:32.280Z,1528866272.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:32.660Z,1528866272.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:33.043Z,1528866273.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:33.061Z,1528866273.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:33.443Z,1528866273.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:33.461Z,1528866273.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:33.832Z,1528866273.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:33.859Z,1528866273.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:34.276Z,1528866274.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:34.670Z,1528866274.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:35.067Z,1528866275.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:35.457Z,1528866275.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:35.864Z,1528866275.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:36.258Z,1528866276.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:36.659Z,1528866276.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:37.072Z,1528866277.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:37.471Z,1528866277.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:37.849Z,1528866277.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:37.867Z,1528866277.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:38.231Z,1528866278.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:38.265Z,1528866278.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:38.641Z,1528866278.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:38.659Z,1528866278.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:39.055Z,1528866279.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:39.464Z,1528866279.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:39.860Z,1528866279.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:40.269Z,1528866280.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:40.668Z,1528866280.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:41.072Z,1528866281.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:41.455Z,1528866281.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:41.859Z,1528866281.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:42.258Z,1528866282.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:42.655Z,1528866282.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:43.072Z,1528866283.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:43.476Z,1528866283.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:43.872Z,1528866283.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:44.264Z,1528866284.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:44.663Z,1528866284.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:45.044Z,1528866285.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:45.061Z,1528866285.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:45.443Z,1528866285.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:45.461Z,1528866285.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:45.831Z,1528866285.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:45.868Z,1528866285.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:46.250Z,1528866286.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:46.268Z,1528866286.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:46.651Z,1528866286.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:46.669Z,1528866286.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:47.052Z,1528866287.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:47.076Z,1528866287.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:47.432Z,1528866287.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:47.461Z,1528866287.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:47.831Z,1528866287.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:47.859Z,1528866287.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:48.241Z,1528866288.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:48.259Z,1528866288.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:48.632Z,1528866288.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:48.660Z,1528866288.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:49.050Z,1528866289.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:49.068Z,1528866289.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:49.453Z,1528866289.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:49.470Z,1528866289.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:49.854Z,1528866289.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:49.876Z,1528866289.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:50.242Z,1528866290.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:50.260Z,1528866290.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:50.641Z,1528866290.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:50.664Z,1528866290.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:51.027Z,1528866291.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:51.057Z,1528866291.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:51.441Z,1528866291.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:51.460Z,1528866291.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:51.842Z,1528866291.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:51.864Z,1528866291.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:52.255Z,1528866292.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:52.280Z,1528866292.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:52.648Z,1528866292.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:52.666Z,1528866292.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:53.047Z,1528866293.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:53.070Z,1528866293.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:53.430Z,1528866293.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:53.459Z,1528866293.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:53.843Z,1528866293.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:53.861Z,1528866293.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:54.236Z,1528866294.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:54.262Z,1528866294.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:54.641Z,1528866294.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:54.658Z,1528866294.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:55.041Z,1528866295.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:55.064Z,1528866295.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:55.449Z,1528866295.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:55.483Z,1528866295.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:55.846Z,1528866295.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:55.863Z,1528866295.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:56.239Z,1528866296.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:56.257Z,1528866296.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:56.637Z,1528866296.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:56.661Z,1528866296.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:57.038Z,1528866297.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:57.055Z,1528866297.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:57.438Z,1528866297.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:57.456Z,1528866297.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:57.838Z,1528866297.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:57.873Z,1528866297.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:58.249Z,1528866298.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:58.266Z,1528866298.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:58.647Z,1528866298.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:58.664Z,1528866298.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:59.045Z,1528866299.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:59.068Z,1528866299.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:59.443Z,1528866299.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:59.461Z,1528866299.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:04:59.832Z,1528866299.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:04:59.857Z,1528866299.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:00.241Z,1528866300.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:00.259Z,1528866300.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:00.638Z,1528866300.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:00.656Z,1528866300.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:01.048Z,1528866301.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:01.086Z,1528866301.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:01.450Z,1528866301.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:01.468Z,1528866301.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:01.847Z,1528866301.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:01.864Z,1528866301.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:02.238Z,1528866302.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:02.255Z,1528866302.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:02.630Z,1528866302.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:02.665Z,1528866302.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:03.028Z,1528866303.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:03.060Z,1528866303.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:03.432Z,1528866303.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:03.464Z,1528866303.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:03.841Z,1528866303.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:03.862Z,1528866303.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:04.257Z,1528866304.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:04.274Z,1528866304.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:04.646Z,1528866304.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:04.680Z,1528866304.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:05.046Z,1528866305.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:05.077Z,1528866305.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:05.459Z,1528866305.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:05.861Z,1528866305.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:06.263Z,1528866306.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:06.642Z,1528866306.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:06.659Z,1528866306.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:07.048Z,1528866307.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:07.066Z,1528866307.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:07.453Z,1528866307.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:07.476Z,1528866307.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:07.850Z,1528866307.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:07.879Z,1528866307.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:08.238Z,1528866308.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:08.263Z,1528866308.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:08.638Z,1528866308.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:08.664Z,1528866308.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:09.031Z,1528866309.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:09.069Z,1528866309.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:09.428Z,1528866309.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:09.464Z,1528866309.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:09.833Z,1528866309.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:09.876Z,1528866309.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:10.250Z,1528866310.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:10.272Z,1528866310.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:10.649Z,1528866310.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:10.671Z,1528866310.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:11.049Z,1528866311.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:11.073Z,1528866311.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:11.446Z,1528866311.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:11.464Z,1528866311.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:11.834Z,1528866311.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:11.862Z,1528866311.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:12.232Z,1528866312.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:12.280Z,1528866312.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:12.677Z,1528866312.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:13.071Z,1528866313.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:13.471Z,1528866313.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:13.875Z,1528866313.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:14.283Z,1528866314.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:14.676Z,1528866314.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:15.064Z,1528866315.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:15.463Z,1528866315.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:15.862Z,1528866315.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:16.280Z,1528866316.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:16.676Z,1528866316.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:17.084Z,1528866317.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:17.464Z,1528866317.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:17.868Z,1528866317.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:18.273Z,1528866318.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:18.672Z,1528866318.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:19.076Z,1528866319.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:19.473Z,1528866319.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:19.871Z,1528866319.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:20.273Z,1528866320.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:20.669Z,1528866320.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:21.071Z,1528866321.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:21.450Z,1528866321.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:21.849Z,1528866321.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:22.282Z,1528866322.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:22.678Z,1528866322.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:23.078Z,1528866323.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:23.481Z,1528866323.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:23.852Z,1528866323.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:24.257Z,1528866324.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:24.654Z,1528866324.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:25.081Z,1528866325.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:25.486Z,1528866325.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:25.890Z,1528866325.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:26.260Z,1528866326.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:26.660Z,1528866326.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:27.055Z,1528866327.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:27.477Z,1528866327.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:27.859Z,1528866327.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:28.263Z,1528866328.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:28.666Z,1528866328.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:29.069Z,1528866329.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:32.163Z,1528866332.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:32.312Z,1528866332.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:32.716Z,1528866332.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:33.100Z,1528866333.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:33.119Z,1528866333.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:33.498Z,1528866333.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:33.516Z,1528866333.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:33.873Z,1528866333.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:33.907Z,1528866333.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:34.275Z,1528866334.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:34.304Z,1528866334.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:34.671Z,1528866334.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:34.717Z,1528866334.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:35.095Z,1528866335.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:35.138Z,1528866335.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:35.496Z,1528866335.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:35.520Z,1528866335.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:35.888Z,1528866335.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:35.913Z,1528866335.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:36.275Z,1528866336.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:36.324Z,1528866336.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:36.671Z,1528866336.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:36.709Z,1528866336.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:37.073Z,1528866337.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:37.112Z,1528866337.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:37.479Z,1528866337.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:37.507Z,1528866337.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:37.875Z,1528866337.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:37.909Z,1528866337.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:38.283Z,1528866338.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:38.320Z,1528866338.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:38.697Z,1528866338.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:38.715Z,1528866338.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:39.092Z,1528866339.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:39.110Z,1528866339.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:39.471Z,1528866339.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:39.513Z,1528866339.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:39.875Z,1528866339.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:39.914Z,1528866339.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:40.269Z,1528866340.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:40.316Z,1528866340.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:40.670Z,1528866340.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:40.709Z,1528866340.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:41.085Z,1528866341.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:41.117Z,1528866341.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:41.481Z,1528866341.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:41.519Z,1528866341.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:41.884Z,1528866341.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:41.919Z,1528866341.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:42.273Z,1528866342.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:42.309Z,1528866342.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:42.671Z,1528866342.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:42.718Z,1528866342.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:43.067Z,1528866343.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:43.085Z,1528866343.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:43.475Z,1528866343.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:05:43.514Z,1528866343.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:43.895Z,1528866343.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:44.324Z,1528866344.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:44.720Z,1528866344.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:45.122Z,1528866345.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:45.496Z,1528866345.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:45.920Z,1528866345.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:46.292Z,1528866346.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:46.693Z,1528866346.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:47.120Z,1528866347.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:47.522Z,1528866347.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:47.918Z,1528866347.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:48.296Z,1528866348.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:48.695Z,1528866348.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:49.090Z,1528866349.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:49.496Z,1528866349.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:49.896Z,1528866349.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:50.303Z,1528866350.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:50.728Z,1528866350.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:51.104Z,1528866351.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:51.495Z,1528866351.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:51.899Z,1528866351.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:52.300Z,1528866352.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:52.692Z,1528866352.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:53.104Z,1528866353.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:53.530Z,1528866353.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:53.927Z,1528866353.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:54.300Z,1528866354.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:54.720Z,1528866354.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:55.098Z,1528866355.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:55.495Z,1528866355.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:55.895Z,1528866355.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:56.302Z,1528866356.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:56.708Z,1528866356.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:57.104Z,1528866357.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:57.493Z,1528866357.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:57.895Z,1528866357.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:58.302Z,1528866358.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:58.693Z,1528866358.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:59.100Z,1528866359.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:59.506Z,1528866359.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:05:59.908Z,1528866359.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:00.294Z,1528866360.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:00.696Z,1528866360.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:01.092Z,1528866361.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:01.508Z,1528866361.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:01.896Z,1528866361.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:02.303Z,1528866362.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:02.710Z,1528866362.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:03.110Z,1528866363.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:03.494Z,1528866363.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:03.896Z,1528866363.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:04.297Z,1528866364.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:04.692Z,1528866364.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:05.103Z,1528866365.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:05.512Z,1528866365.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:05.901Z,1528866365.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:06.314Z,1528866366.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:06.672Z,1528866366.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:06.701Z,1528866366.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:07.084Z,1528866367.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:07.108Z,1528866367.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:07.492Z,1528866367.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:07.510Z,1528866367.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:07.892Z,1528866367.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:07.914Z,1528866367.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:08.268Z,1528866368.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:08.311Z,1528866368.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:08.675Z,1528866368.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:08.708Z,1528866368.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:09.081Z,1528866369.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:09.122Z,1528866369.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:09.481Z,1528866369.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:09.522Z,1528866369.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:09.882Z,1528866369.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:09.923Z,1528866369.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:10.289Z,1528866370.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:10.692Z,1528866370.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:11.124Z,1528866371.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:11.486Z,1528866371.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:11.504Z,1528866371.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:11.883Z,1528866371.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:11.901Z,1528866371.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:12.275Z,1528866372.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:12.299Z,1528866372.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:12.677Z,1528866372.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:12.696Z,1528866372.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:13.087Z,1528866373.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:13.105Z,1528866373.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:13.486Z,1528866373.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:13.504Z,1528866373.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:13.887Z,1528866373.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:13.912Z,1528866373.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:14.278Z,1528866374.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:14.295Z,1528866374.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:14.675Z,1528866374.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:14.697Z,1528866374.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:15.086Z,1528866375.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:15.105Z,1528866375.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:15.490Z,1528866375.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:15.507Z,1528866375.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:15.890Z,1528866375.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:15.908Z,1528866375.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:16.268Z,1528866376.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:16.295Z,1528866376.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:16.667Z,1528866376.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:16.703Z,1528866376.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:17.087Z,1528866377.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:17.105Z,1528866377.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:17.481Z,1528866377.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:17.509Z,1528866377.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:17.882Z,1528866377.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:17.919Z,1528866377.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:18.270Z,1528866378.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:18.304Z,1528866378.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:18.667Z,1528866378.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:18.684Z,1528866378.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:19.085Z,1528866379.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:19.117Z,1528866379.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:19.485Z,1528866379.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:19.519Z,1528866379.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:19.881Z,1528866379.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:19.916Z,1528866379.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:20.272Z,1528866380.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:20.315Z,1528866380.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:20.675Z,1528866380.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:20.711Z,1528866380.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:21.085Z,1528866381.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:21.114Z,1528866381.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:21.485Z,1528866381.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:21.520Z,1528866381.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:21.881Z,1528866381.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:21.908Z,1528866381.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:22.314Z,1528866382.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:22.705Z,1528866382.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:23.114Z,1528866383.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:23.513Z,1528866383.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:23.914Z,1528866383.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:24.292Z,1528866384.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:24.689Z,1528866384.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:25.114Z,1528866385.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:25.515Z,1528866385.515 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:25.515Z,1528866385.515 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2018-06-13T05:06:25.515Z,1528866385.515 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:06:25.517Z,1528866385.517 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:25.517Z,1528866385.517 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34
2018-06-13T05:06:25.517Z,1528866385.517 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:06:25.519Z,1528866385.519 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:25.519Z,1528866385.519 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2018-06-13T05:06:25.519Z,1528866385.519 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:06:25.597Z,1528866385.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:06:25.597Z,1528866385.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:06:25.598Z,1528866385.598 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:06:26.001Z,1528866386.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:06:26.001Z,1528866386.001 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2018-06-13T05:06:26.002Z,1528866386.002 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:06:26.002Z,1528866386.002 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34
2018-06-13T05:06:26.002Z,1528866386.002 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:06:26.002Z,1528866386.002 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2018-06-13T05:06:26.293Z,1528866386.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:06:26.293Z,1528866386.293 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:06:26.294Z,1528866386.294 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:06:26.294Z,1528866386.294 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:06:26.294Z,1528866386.294 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:06:26.295Z,1528866386.295 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:06:26.295Z,1528866386.295 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:06:26.295Z,1528866386.295 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:06:26.296Z,1528866386.296 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:06:26.699Z,1528866386.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:06:26.700Z,1528866386.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:27.103Z,1528866387.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:06:27.104Z,1528866387.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:27.508Z,1528866387.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:06:27.508Z,1528866387.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:27.902Z,1528866387.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:06:27.903Z,1528866387.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:28.295Z,1528866388.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:06:28.296Z,1528866388.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:28.698Z,1528866388.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:06:28.699Z,1528866388.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:29.106Z,1528866389.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:06:29.107Z,1528866389.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:29.111Z,1528866389.111 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T05:01:28.8Z
2018-06-13T05:06:29.111Z,1528866389.111 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T05:06:29.111Z,1528866389.111 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T05:06:32.234Z,1528866392.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T05:06:32.235Z,1528866392.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:33.264Z,1528866393.264 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0040.lzma
2018-06-13T05:06:33.327Z,1528866393.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T05:06:33.328Z,1528866393.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:33.478Z,1528866393.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:06:33.479Z,1528866393.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:33.814Z,1528866393.814 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0040.lzma.bak
2018-06-13T05:06:33.814Z,1528866393.814 [DataOverHttps](INFO): SBD MOMSN=8328621
2018-06-13T05:06:33.889Z,1528866393.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:06:33.890Z,1528866393.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:35.726Z,1528866395.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T05:06:35.727Z,1528866395.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:35.879Z,1528866395.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:06:35.880Z,1528866395.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:36.286Z,1528866396.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:06:36.287Z,1528866396.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:39.382Z,1528866399.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T05:06:39.383Z,1528866399.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:39.540Z,1528866399.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:06:39.541Z,1528866399.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:39.916Z,1528866399.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:06:39.917Z,1528866399.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:40.343Z,1528866400.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:06:40.344Z,1528866400.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:40.715Z,1528866400.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:06:40.716Z,1528866400.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:41.134Z,1528866401.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:06:41.135Z,1528866401.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:41.536Z,1528866401.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:06:41.537Z,1528866401.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:41.924Z,1528866401.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:06:41.925Z,1528866401.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:42.324Z,1528866402.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:06:42.325Z,1528866402.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:45.423Z,1528866405.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T05:06:45.424Z,1528866405.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:45.517Z,1528866405.517 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20180613T032335/Express0041.lzma
2018-06-13T05:06:45.617Z,1528866405.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:45.984Z,1528866405.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:46.314Z,1528866406.314 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0041.lzma.bak
2018-06-13T05:06:46.314Z,1528866406.314 [DataOverHttps](INFO): SBD MOMSN=8328623
2018-06-13T05:06:46.406Z,1528866406.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:48.241Z,1528866408.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:48.244Z,1528866408.244 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T05:06:48.244Z,1528866408.244 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T05:06:48.244Z,1528866408.244 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T05:06:48.402Z,1528866408.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:48.790Z,1528866408.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:51.895Z,1528866411.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:52.051Z,1528866412.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:52.444Z,1528866412.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:52.827Z,1528866412.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:52.845Z,1528866412.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:53.221Z,1528866413.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:53.239Z,1528866413.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:53.625Z,1528866413.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:53.643Z,1528866413.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:54.026Z,1528866414.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:54.048Z,1528866414.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:54.431Z,1528866414.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:54.456Z,1528866414.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:54.834Z,1528866414.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:54.857Z,1528866414.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:55.234Z,1528866415.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:55.260Z,1528866415.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:55.616Z,1528866415.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:55.642Z,1528866415.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:56.025Z,1528866416.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:56.042Z,1528866416.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:56.426Z,1528866416.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:56.560Z,1528866416.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:56.826Z,1528866416.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:56.845Z,1528866416.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:57.249Z,1528866417.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:57.305Z,1528866417.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:57.640Z,1528866417.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:57.679Z,1528866417.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:58.024Z,1528866418.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:58.101Z,1528866418.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:58.418Z,1528866418.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:58.499Z,1528866418.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:58.818Z,1528866418.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:58.852Z,1528866418.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:59.215Z,1528866419.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:59.248Z,1528866419.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:06:59.622Z,1528866419.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:06:59.647Z,1528866419.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:00.026Z,1528866420.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:00.043Z,1528866420.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:00.429Z,1528866420.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:00.447Z,1528866420.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:00.837Z,1528866420.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:00.871Z,1528866420.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:01.232Z,1528866421.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:01.250Z,1528866421.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:01.625Z,1528866421.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:01.643Z,1528866421.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:02.027Z,1528866422.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:02.044Z,1528866422.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:02.423Z,1528866422.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:02.448Z,1528866422.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:02.826Z,1528866422.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:02.846Z,1528866422.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:03.231Z,1528866423.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:03.248Z,1528866423.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:03.630Z,1528866423.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:03.648Z,1528866423.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:04.034Z,1528866424.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:04.056Z,1528866424.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:04.423Z,1528866424.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:04.445Z,1528866424.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:04.824Z,1528866424.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:04.842Z,1528866424.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:05.224Z,1528866425.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:05.250Z,1528866425.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:05.619Z,1528866425.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:05.648Z,1528866425.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:06.015Z,1528866426.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:06.051Z,1528866426.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:06.436Z,1528866426.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:06.454Z,1528866426.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:06.840Z,1528866426.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:06.858Z,1528866426.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:07.232Z,1528866427.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:07.250Z,1528866427.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:07.615Z,1528866427.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:07.664Z,1528866427.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:08.015Z,1528866428.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:08.084Z,1528866428.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:08.419Z,1528866428.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:08.448Z,1528866428.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:08.819Z,1528866428.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:08.853Z,1528866428.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:09.227Z,1528866429.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:09.259Z,1528866429.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:09.626Z,1528866429.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:09.656Z,1528866429.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:10.028Z,1528866430.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:10.063Z,1528866430.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:10.417Z,1528866430.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:10.455Z,1528866430.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:10.811Z,1528866430.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:10.858Z,1528866430.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:11.215Z,1528866431.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:11.255Z,1528866431.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:11.618Z,1528866431.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:11.659Z,1528866431.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:12.014Z,1528866432.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:12.032Z,1528866432.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:12.425Z,1528866432.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:12.467Z,1528866432.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:12.831Z,1528866432.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:12.861Z,1528866432.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:13.232Z,1528866433.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:13.260Z,1528866433.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:13.619Z,1528866433.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:13.636Z,1528866433.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:14.019Z,1528866434.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:14.067Z,1528866434.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:14.419Z,1528866434.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:14.466Z,1528866434.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:14.815Z,1528866434.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:14.852Z,1528866434.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:15.231Z,1528866435.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:15.266Z,1528866435.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:15.625Z,1528866435.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:15.671Z,1528866435.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:16.030Z,1528866436.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:16.059Z,1528866436.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:16.418Z,1528866436.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:16.468Z,1528866436.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:16.815Z,1528866436.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:16.858Z,1528866436.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:17.218Z,1528866437.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:17.267Z,1528866437.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:17.617Z,1528866437.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:17.637Z,1528866437.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:18.014Z,1528866438.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:18.036Z,1528866438.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:18.431Z,1528866438.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:18.466Z,1528866438.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:18.829Z,1528866438.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:18.872Z,1528866438.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:19.225Z,1528866439.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:19.268Z,1528866439.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:19.618Z,1528866439.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:19.641Z,1528866439.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:20.019Z,1528866440.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:20.040Z,1528866440.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:20.417Z,1528866440.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:20.465Z,1528866440.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:20.818Z,1528866440.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:20.836Z,1528866440.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:21.230Z,1528866441.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:21.266Z,1528866441.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:21.628Z,1528866441.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:21.666Z,1528866441.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:22.029Z,1528866442.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:22.072Z,1528866442.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:22.418Z,1528866442.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:22.436Z,1528866442.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:22.816Z,1528866442.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:22.844Z,1528866442.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:23.219Z,1528866443.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:23.241Z,1528866443.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:23.619Z,1528866443.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:23.636Z,1528866443.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:24.017Z,1528866444.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:24.034Z,1528866444.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:24.429Z,1528866444.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:24.466Z,1528866444.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:24.831Z,1528866444.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:24.866Z,1528866444.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:25.230Z,1528866445.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:25.268Z,1528866445.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:25.617Z,1528866445.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:25.635Z,1528866445.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:26.018Z,1528866446.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:26.064Z,1528866446.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:26.418Z,1528866446.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:26.441Z,1528866446.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:26.818Z,1528866446.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:26.836Z,1528866446.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:27.238Z,1528866447.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:27.281Z,1528866447.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:27.629Z,1528866447.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:27.652Z,1528866447.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:28.035Z,1528866448.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:28.055Z,1528866448.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:28.419Z,1528866448.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:28.456Z,1528866448.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:28.822Z,1528866448.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:28.840Z,1528866448.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:29.221Z,1528866449.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:29.239Z,1528866449.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:29.619Z,1528866449.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:29.655Z,1528866449.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:30.019Z,1528866450.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:30.036Z,1528866450.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:30.430Z,1528866450.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:30.448Z,1528866450.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:30.830Z,1528866450.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:30.852Z,1528866450.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:31.226Z,1528866451.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:31.249Z,1528866451.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:31.619Z,1528866451.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:31.651Z,1528866451.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:32.019Z,1528866452.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:32.057Z,1528866452.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:32.422Z,1528866452.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:32.439Z,1528866452.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:32.819Z,1528866452.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:32.847Z,1528866452.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:33.230Z,1528866453.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:33.248Z,1528866453.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:33.630Z,1528866453.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:33.648Z,1528866453.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:34.034Z,1528866454.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:34.075Z,1528866454.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:34.421Z,1528866454.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:34.438Z,1528866454.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:34.812Z,1528866454.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:34.839Z,1528866454.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:35.211Z,1528866455.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:35.247Z,1528866455.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:35.616Z,1528866455.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:35.654Z,1528866455.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:36.011Z,1528866456.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:36.039Z,1528866456.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:36.431Z,1528866456.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:36.449Z,1528866456.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:36.834Z,1528866456.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:36.870Z,1528866456.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:37.232Z,1528866457.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:37.249Z,1528866457.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:37.615Z,1528866457.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:37.642Z,1528866457.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:38.015Z,1528866458.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:38.048Z,1528866458.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:38.415Z,1528866458.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:38.443Z,1528866458.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:38.815Z,1528866458.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:38.842Z,1528866458.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:39.230Z,1528866459.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:39.258Z,1528866459.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:39.637Z,1528866459.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:39.654Z,1528866459.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:40.036Z,1528866460.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:40.060Z,1528866460.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:40.415Z,1528866460.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:40.451Z,1528866460.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:40.819Z,1528866460.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:40.848Z,1528866460.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:41.221Z,1528866461.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:41.257Z,1528866461.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:41.635Z,1528866461.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:41.657Z,1528866461.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:42.034Z,1528866462.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:42.056Z,1528866462.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:42.411Z,1528866462.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:42.444Z,1528866462.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:42.815Z,1528866462.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:42.851Z,1528866462.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:43.238Z,1528866463.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:43.255Z,1528866463.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:43.627Z,1528866463.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:43.666Z,1528866463.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:44.021Z,1528866464.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:44.059Z,1528866464.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:44.414Z,1528866464.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:44.433Z,1528866464.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:44.819Z,1528866464.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:44.857Z,1528866464.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:45.230Z,1528866465.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:45.260Z,1528866465.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:45.633Z,1528866465.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:45.670Z,1528866465.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:46.025Z,1528866466.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:46.063Z,1528866466.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:46.419Z,1528866466.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:46.437Z,1528866466.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:46.816Z,1528866466.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:46.840Z,1528866466.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:47.222Z,1528866467.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:47.239Z,1528866467.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:47.629Z,1528866467.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:47.647Z,1528866467.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:48.025Z,1528866468.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:48.048Z,1528866468.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:48.422Z,1528866468.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:48.440Z,1528866468.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:48.824Z,1528866468.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:48.841Z,1528866468.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:51.941Z,1528866471.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:51.982Z,1528866471.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:52.128Z,1528866472.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:52.146Z,1528866472.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:52.508Z,1528866472.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:52.540Z,1528866472.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:52.902Z,1528866472.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:52.937Z,1528866472.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:53.297Z,1528866473.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:53.331Z,1528866473.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:53.699Z,1528866473.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:53.738Z,1528866473.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:54.095Z,1528866474.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:54.142Z,1528866474.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:54.511Z,1528866474.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:54.551Z,1528866474.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:54.913Z,1528866474.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:54.940Z,1528866474.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:55.313Z,1528866475.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:55.341Z,1528866475.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:55.699Z,1528866475.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:55.745Z,1528866475.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:56.101Z,1528866476.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:56.144Z,1528866476.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:56.504Z,1528866476.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:56.548Z,1528866476.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:56.898Z,1528866476.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:56.916Z,1528866476.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:57.312Z,1528866477.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:57.338Z,1528866477.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:57.711Z,1528866477.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:57.742Z,1528866477.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:58.111Z,1528866478.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:58.148Z,1528866478.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:58.502Z,1528866478.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:58.529Z,1528866478.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:58.897Z,1528866478.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:58.945Z,1528866478.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:59.300Z,1528866479.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:59.321Z,1528866479.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:07:59.701Z,1528866479.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:07:59.719Z,1528866479.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:00.102Z,1528866480.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:00.120Z,1528866480.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:00.505Z,1528866480.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:00.547Z,1528866480.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:00.911Z,1528866480.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:00.948Z,1528866480.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:01.312Z,1528866481.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:01.347Z,1528866481.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:01.699Z,1528866481.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:01.717Z,1528866481.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:02.098Z,1528866482.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:02.141Z,1528866482.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:02.498Z,1528866482.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:02.520Z,1528866482.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:02.895Z,1528866482.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:02.916Z,1528866482.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:03.311Z,1528866483.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:03.344Z,1528866483.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:03.709Z,1528866483.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:03.746Z,1528866483.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:04.102Z,1528866484.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:04.151Z,1528866484.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:04.499Z,1528866484.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:04.545Z,1528866484.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:04.900Z,1528866484.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:04.918Z,1528866484.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:05.295Z,1528866485.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:05.340Z,1528866485.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:05.700Z,1528866485.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:05.723Z,1528866485.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:06.104Z,1528866486.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:06.124Z,1528866486.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:06.508Z,1528866486.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:06.548Z,1528866486.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:06.909Z,1528866486.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:06.947Z,1528866486.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:07.305Z,1528866487.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:07.332Z,1528866487.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:07.695Z,1528866487.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:07.722Z,1528866487.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:08.103Z,1528866488.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:08.121Z,1528866488.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:08.501Z,1528866488.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:08.551Z,1528866488.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:08.900Z,1528866488.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:08.923Z,1528866488.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:09.307Z,1528866489.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:09.328Z,1528866489.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:09.711Z,1528866489.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:09.728Z,1528866489.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:10.106Z,1528866490.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:10.148Z,1528866490.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:10.500Z,1528866490.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:10.522Z,1528866490.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:10.902Z,1528866490.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:10.924Z,1528866490.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:11.295Z,1528866491.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:11.322Z,1528866491.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:11.700Z,1528866491.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:11.745Z,1528866491.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:12.100Z,1528866492.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:12.119Z,1528866492.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:12.506Z,1528866492.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:12.528Z,1528866492.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:12.913Z,1528866492.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:12.931Z,1528866492.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:13.305Z,1528866493.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:13.351Z,1528866493.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:13.698Z,1528866493.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:13.716Z,1528866493.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:14.100Z,1528866494.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:14.123Z,1528866494.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:14.503Z,1528866494.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:14.524Z,1528866494.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:14.895Z,1528866494.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:14.949Z,1528866494.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:15.306Z,1528866495.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:15.326Z,1528866495.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:15.714Z,1528866495.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:15.755Z,1528866495.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:16.112Z,1528866496.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:16.131Z,1528866496.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:16.501Z,1528866496.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:16.552Z,1528866496.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:16.902Z,1528866496.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:16.919Z,1528866496.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:17.295Z,1528866497.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:17.322Z,1528866497.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:17.700Z,1528866497.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:17.735Z,1528866497.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:18.101Z,1528866498.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:18.129Z,1528866498.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:18.511Z,1528866498.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:18.532Z,1528866498.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:18.910Z,1528866498.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:18.933Z,1528866498.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:19.312Z,1528866499.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:19.336Z,1528866499.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:19.695Z,1528866499.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:19.736Z,1528866499.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:20.101Z,1528866500.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:20.118Z,1528866500.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:20.503Z,1528866500.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:20.520Z,1528866500.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:20.901Z,1528866500.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:20.924Z,1528866500.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:21.310Z,1528866501.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:21.327Z,1528866501.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:21.714Z,1528866501.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:21.734Z,1528866501.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:22.111Z,1528866502.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:22.134Z,1528866502.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:22.502Z,1528866502.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:22.525Z,1528866502.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:22.918Z,1528866502.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:23.316Z,1528866503.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:23.721Z,1528866503.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:24.122Z,1528866504.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:24.529Z,1528866504.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:24.931Z,1528866504.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:25.338Z,1528866505.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:25.726Z,1528866505.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:26.120Z,1528866506.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:26.492Z,1528866506.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:26.530Z,1528866506.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:26.891Z,1528866506.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:26.927Z,1528866506.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:27.315Z,1528866507.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:27.338Z,1528866507.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:27.712Z,1528866507.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:27.729Z,1528866507.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:28.113Z,1528866508.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:28.131Z,1528866508.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:28.496Z,1528866508.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:28.534Z,1528866508.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:28.895Z,1528866508.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:28.924Z,1528866508.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:29.295Z,1528866509.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:29.324Z,1528866509.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:29.696Z,1528866509.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:29.724Z,1528866509.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:30.095Z,1528866510.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:30.124Z,1528866510.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:30.510Z,1528866510.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:30.531Z,1528866510.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:30.916Z,1528866510.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:30.934Z,1528866510.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:31.304Z,1528866511.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:31.341Z,1528866511.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:31.695Z,1528866511.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:31.728Z,1528866511.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:32.096Z,1528866512.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:32.130Z,1528866512.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:32.495Z,1528866512.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:32.513Z,1528866512.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:32.899Z,1528866512.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:32.940Z,1528866512.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:33.309Z,1528866513.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:33.350Z,1528866513.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:33.709Z,1528866513.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:33.726Z,1528866513.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:34.106Z,1528866514.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:34.124Z,1528866514.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:34.500Z,1528866514.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:34.520Z,1528866514.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:34.898Z,1528866514.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:34.915Z,1528866514.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:35.306Z,1528866515.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:35.323Z,1528866515.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:35.709Z,1528866515.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:35.727Z,1528866515.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:36.110Z,1528866516.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:36.132Z,1528866516.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:36.501Z,1528866516.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:36.519Z,1528866516.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:36.899Z,1528866516.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:36.921Z,1528866516.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:37.306Z,1528866517.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:37.324Z,1528866517.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:37.710Z,1528866517.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:37.732Z,1528866517.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:38.110Z,1528866518.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:38.128Z,1528866518.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:38.502Z,1528866518.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:38.519Z,1528866518.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:38.891Z,1528866518.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:38.927Z,1528866518.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:39.311Z,1528866519.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:39.329Z,1528866519.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:39.711Z,1528866519.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:39.729Z,1528866519.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:40.107Z,1528866520.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:40.125Z,1528866520.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:40.495Z,1528866520.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:40.530Z,1528866520.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:40.895Z,1528866520.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:40.934Z,1528866520.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:41.312Z,1528866521.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:41.336Z,1528866521.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:41.714Z,1528866521.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:41.732Z,1528866521.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:42.116Z,1528866522.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:42.133Z,1528866522.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:42.496Z,1528866522.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:42.527Z,1528866522.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:42.895Z,1528866522.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:42.928Z,1528866522.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:43.316Z,1528866523.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:43.333Z,1528866523.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:43.715Z,1528866523.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:43.733Z,1528866523.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:44.111Z,1528866524.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:44.129Z,1528866524.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:44.491Z,1528866524.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:44.539Z,1528866524.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:44.891Z,1528866524.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:44.932Z,1528866524.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:45.306Z,1528866525.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:45.339Z,1528866525.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:45.710Z,1528866525.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:45.738Z,1528866525.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:46.105Z,1528866526.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:46.139Z,1528866526.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:46.495Z,1528866526.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:46.536Z,1528866526.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:46.899Z,1528866526.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:46.916Z,1528866526.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:47.305Z,1528866527.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:47.339Z,1528866527.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:47.710Z,1528866527.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:47.744Z,1528866527.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:48.109Z,1528866528.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:48.127Z,1528866528.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:48.501Z,1528866528.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:48.519Z,1528866528.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:48.902Z,1528866528.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:48.920Z,1528866528.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:49.312Z,1528866529.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:49.336Z,1528866529.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:49.709Z,1528866529.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:49.727Z,1528866529.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:50.109Z,1528866530.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:50.127Z,1528866530.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:53.217Z,1528866533.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:53.235Z,1528866533.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:53.375Z,1528866533.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:53.415Z,1528866533.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:53.783Z,1528866533.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:53.820Z,1528866533.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:54.199Z,1528866534.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:54.217Z,1528866534.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:54.579Z,1528866534.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:54.615Z,1528866534.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:54.971Z,1528866534.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:55.017Z,1528866535.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:55.371Z,1528866535.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:55.411Z,1528866535.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:55.768Z,1528866535.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:55.791Z,1528866535.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:56.177Z,1528866536.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:56.195Z,1528866536.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:56.589Z,1528866536.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:56.628Z,1528866536.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:56.985Z,1528866536.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:57.018Z,1528866537.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:57.388Z,1528866537.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:57.422Z,1528866537.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:57.778Z,1528866537.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:57.795Z,1528866537.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:58.171Z,1528866538.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:58.222Z,1528866538.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:58.578Z,1528866538.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:58.602Z,1528866538.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:58.977Z,1528866538.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:58.000Z,1528866539.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:59.384Z,1528866539.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:59.402Z,1528866539.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:08:59.785Z,1528866539.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:08:59.832Z,1528866539.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:00.186Z,1528866540.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:00.234Z,1528866540.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:00.576Z,1528866540.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:00.600Z,1528866540.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:00.978Z,1528866540.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:00.999Z,1528866540.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:01.377Z,1528866541.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:01.427Z,1528866541.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:01.778Z,1528866541.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:01.799Z,1528866541.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:02.174Z,1528866542.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:02.219Z,1528866542.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:02.588Z,1528866542.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:02.608Z,1528866542.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:02.982Z,1528866542.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:03.027Z,1528866543.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:03.382Z,1528866543.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:03.405Z,1528866543.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:03.778Z,1528866543.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:03.802Z,1528866543.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:04.171Z,1528866544.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:04.203Z,1528866544.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:04.575Z,1528866544.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:04.624Z,1528866544.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:04.978Z,1528866544.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:04.997Z,1528866544.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:05.383Z,1528866545.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:05.407Z,1528866545.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:05.788Z,1528866545.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:05.808Z,1528866545.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:06.185Z,1528866546.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:06.235Z,1528866546.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:06.571Z,1528866546.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:06.594Z,1528866546.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:06.975Z,1528866546.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:07.003Z,1528866547.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:07.378Z,1528866547.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:07.402Z,1528866547.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:07.771Z,1528866547.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:07.795Z,1528866547.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:08.178Z,1528866548.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:08.196Z,1528866548.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:08.586Z,1528866548.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:08.625Z,1528866548.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:08.982Z,1528866548.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:09.005Z,1528866549.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:09.382Z,1528866549.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:09.401Z,1528866549.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:09.778Z,1528866549.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:09.801Z,1528866549.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:10.167Z,1528866550.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:10.208Z,1528866550.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:10.575Z,1528866550.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:10.604Z,1528866550.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:10.978Z,1528866550.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:11.001Z,1528866551.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:11.454Z,1528866551.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:11.493Z,1528866551.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:11.792Z,1528866551.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:11.835Z,1528866551.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:12.193Z,1528866552.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:12.243Z,1528866552.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:12.567Z,1528866552.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:12.612Z,1528866552.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:12.971Z,1528866552.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:13.008Z,1528866553.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:13.371Z,1528866553.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:13.408Z,1528866553.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:13.768Z,1528866553.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:13.816Z,1528866553.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:14.175Z,1528866554.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:14.204Z,1528866554.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:14.593Z,1528866554.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:14.619Z,1528866554.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:14.986Z,1528866554.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:15.016Z,1528866555.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:15.386Z,1528866555.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:15.424Z,1528866555.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:15.768Z,1528866555.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:15.799Z,1528866555.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:16.167Z,1528866556.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:16.208Z,1528866556.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:16.572Z,1528866556.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:16.612Z,1528866556.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:16.967Z,1528866556.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:17.012Z,1528866557.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:17.382Z,1528866557.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:17.414Z,1528866557.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:17.781Z,1528866557.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:17.821Z,1528866557.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:18.185Z,1528866558.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:18.223Z,1528866558.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:18.570Z,1528866558.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:18.588Z,1528866558.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:18.975Z,1528866558.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:18.993Z,1528866558.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:19.374Z,1528866559.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:19.391Z,1528866559.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:19.771Z,1528866559.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:19.789Z,1528866559.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:20.174Z,1528866560.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:20.192Z,1528866560.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:20.581Z,1528866560.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:20.599Z,1528866560.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:20.981Z,1528866560.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:20.000Z,1528866561.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:21.382Z,1528866561.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:21.400Z,1528866561.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:21.777Z,1528866561.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:21.795Z,1528866561.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:22.171Z,1528866562.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:22.194Z,1528866562.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:22.576Z,1528866562.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:22.613Z,1528866562.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:22.973Z,1528866562.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:22.991Z,1528866562.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:23.384Z,1528866563.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:23.402Z,1528866563.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:23.785Z,1528866563.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:23.805Z,1528866563.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:24.187Z,1528866564.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:24.212Z,1528866564.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:24.572Z,1528866564.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:24.598Z,1528866564.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:24.975Z,1528866564.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:24.998Z,1528866564.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:25.386Z,1528866565.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:25.412Z,1528866565.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:25.786Z,1528866565.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:25.804Z,1528866565.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:26.183Z,1528866566.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:26.202Z,1528866566.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:26.579Z,1528866566.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:26.598Z,1528866566.598 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:26.598Z,1528866566.598 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2018-06-13T05:09:26.598Z,1528866566.598 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:09:26.599Z,1528866566.599 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:26.600Z,1528866566.600 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35
2018-06-13T05:09:26.600Z,1528866566.600 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:09:26.601Z,1528866566.601 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:26.601Z,1528866566.601 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2018-06-13T05:09:26.602Z,1528866566.602 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:09:26.673Z,1528866566.673 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:09:26.673Z,1528866566.673 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:09:26.673Z,1528866566.673 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:09:26.985Z,1528866566.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:27.081Z,1528866567.081 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:09:27.081Z,1528866567.081 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2018-06-13T05:09:27.082Z,1528866567.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:09:27.082Z,1528866567.082 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35
2018-06-13T05:09:27.082Z,1528866567.082 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:09:27.082Z,1528866567.082 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2018-06-13T05:09:27.384Z,1528866567.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:27.403Z,1528866567.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:09:27.404Z,1528866567.404 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:09:27.404Z,1528866567.404 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:09:27.405Z,1528866567.405 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:09:27.405Z,1528866567.405 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:09:27.405Z,1528866567.405 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:09:27.406Z,1528866567.406 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:09:27.406Z,1528866567.406 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:09:27.406Z,1528866567.406 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:09:27.783Z,1528866567.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:27.823Z,1528866567.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:09:27.824Z,1528866567.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:28.182Z,1528866568.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:28.205Z,1528866568.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:09:28.206Z,1528866568.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:28.572Z,1528866568.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:28.608Z,1528866568.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:09:28.609Z,1528866568.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:28.971Z,1528866568.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:28.999Z,1528866568.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:09:29.000Z,1528866569.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:29.388Z,1528866569.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:29.406Z,1528866569.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:09:29.407Z,1528866569.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:29.790Z,1528866569.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:29.812Z,1528866569.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:09:29.814Z,1528866569.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:30.187Z,1528866570.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:30.218Z,1528866570.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:09:30.219Z,1528866570.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:30.568Z,1528866570.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:30.613Z,1528866570.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:09:30.614Z,1528866570.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:30.971Z,1528866570.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:31.004Z,1528866571.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:09:31.009Z,1528866571.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:31.381Z,1528866571.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:31.419Z,1528866571.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:09:31.420Z,1528866571.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:31.786Z,1528866571.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:31.820Z,1528866571.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:09:31.821Z,1528866571.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:32.182Z,1528866572.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:32.209Z,1528866572.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:09:32.210Z,1528866572.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:32.567Z,1528866572.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:32.615Z,1528866572.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:09:32.616Z,1528866572.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:32.971Z,1528866572.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:33.012Z,1528866573.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:09:33.012Z,1528866573.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:33.382Z,1528866573.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:33.410Z,1528866573.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:09:33.411Z,1528866573.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:33.781Z,1528866573.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:33.816Z,1528866573.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:09:33.817Z,1528866573.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:34.186Z,1528866574.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:34.213Z,1528866574.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:09:34.214Z,1528866574.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:34.574Z,1528866574.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:34.591Z,1528866574.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:09:34.592Z,1528866574.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:34.975Z,1528866574.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:34.992Z,1528866574.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:09:34.993Z,1528866574.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:35.386Z,1528866575.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:35.422Z,1528866575.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:09:35.423Z,1528866575.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:35.786Z,1528866575.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:35.822Z,1528866575.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:09:35.823Z,1528866575.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:36.193Z,1528866576.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:36.221Z,1528866576.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:09:36.221Z,1528866576.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:36.575Z,1528866576.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:36.620Z,1528866576.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:09:36.621Z,1528866576.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:36.975Z,1528866576.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:36.992Z,1528866576.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:09:36.993Z,1528866576.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:37.385Z,1528866577.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:37.420Z,1528866577.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:09:37.421Z,1528866577.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:37.786Z,1528866577.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:37.819Z,1528866577.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:09:37.820Z,1528866577.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:38.186Z,1528866578.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:38.219Z,1528866578.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:09:38.220Z,1528866578.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:38.575Z,1528866578.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:38.593Z,1528866578.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:09:38.594Z,1528866578.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:38.974Z,1528866578.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:38.996Z,1528866578.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:09:39.021Z,1528866579.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:39.386Z,1528866579.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:39.420Z,1528866579.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T05:09:39.420Z,1528866579.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:39.785Z,1528866579.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:39.804Z,1528866579.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T05:09:39.828Z,1528866579.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:40.190Z,1528866580.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:40.234Z,1528866580.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T05:09:40.235Z,1528866580.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:40.576Z,1528866580.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:40.602Z,1528866580.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:09:40.603Z,1528866580.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:40.974Z,1528866580.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:41.000Z,1528866581.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:09:41.001Z,1528866581.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:41.386Z,1528866581.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:41.404Z,1528866581.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:09:41.413Z,1528866581.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:41.786Z,1528866581.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:41.804Z,1528866581.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:09:41.805Z,1528866581.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:42.186Z,1528866582.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:42.205Z,1528866582.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:09:42.206Z,1528866582.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:42.578Z,1528866582.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:42.596Z,1528866582.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:09:42.597Z,1528866582.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:42.975Z,1528866582.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:42.999Z,1528866582.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:09:43.000Z,1528866583.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:43.387Z,1528866583.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:43.405Z,1528866583.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:09:43.406Z,1528866583.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:43.786Z,1528866583.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:43.812Z,1528866583.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:09:43.829Z,1528866583.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:44.186Z,1528866584.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:44.204Z,1528866584.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:09:44.206Z,1528866584.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:44.575Z,1528866584.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:44.601Z,1528866584.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:09:44.602Z,1528866584.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:44.977Z,1528866584.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:45.000Z,1528866585.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:09:45.002Z,1528866585.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:45.387Z,1528866585.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:45.406Z,1528866585.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:09:45.407Z,1528866585.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:45.792Z,1528866585.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:45.816Z,1528866585.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:09:45.817Z,1528866585.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:46.187Z,1528866586.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:46.211Z,1528866586.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:09:46.212Z,1528866586.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:46.572Z,1528866586.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:46.608Z,1528866586.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:46.971Z,1528866586.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:47.001Z,1528866587.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:47.386Z,1528866587.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:47.408Z,1528866587.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:47.791Z,1528866587.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:47.809Z,1528866587.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:48.192Z,1528866588.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:48.216Z,1528866588.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:48.582Z,1528866588.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:48.600Z,1528866588.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:48.981Z,1528866588.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:48.999Z,1528866588.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:52.105Z,1528866592.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:52.147Z,1528866592.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:52.285Z,1528866592.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:52.308Z,1528866592.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:52.670Z,1528866592.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:52.716Z,1528866592.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:53.060Z,1528866593.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:53.099Z,1528866593.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:53.455Z,1528866593.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:53.497Z,1528866593.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:53.857Z,1528866593.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:53.886Z,1528866593.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:54.256Z,1528866594.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:54.297Z,1528866594.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:54.669Z,1528866594.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:54.707Z,1528866594.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:55.072Z,1528866595.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:55.098Z,1528866595.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:55.471Z,1528866595.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:55.506Z,1528866595.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:55.858Z,1528866595.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:55.904Z,1528866595.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:56.257Z,1528866596.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:56.275Z,1528866596.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:56.659Z,1528866596.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:56.682Z,1528866596.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:57.058Z,1528866597.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:57.082Z,1528866597.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:57.469Z,1528866597.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:57.508Z,1528866597.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:57.872Z,1528866597.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:57.912Z,1528866597.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:58.269Z,1528866598.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:58.306Z,1528866598.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:58.659Z,1528866598.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:58.707Z,1528866598.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:59.060Z,1528866599.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:59.105Z,1528866599.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:59.458Z,1528866599.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:59.476Z,1528866599.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:09:59.860Z,1528866599.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:09:59.883Z,1528866599.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:00.260Z,1528866600.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:00.282Z,1528866600.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:00.666Z,1528866600.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:00.684Z,1528866600.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:01.077Z,1528866601.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:01.113Z,1528866601.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:01.470Z,1528866601.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:01.507Z,1528866601.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:01.862Z,1528866601.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:01.885Z,1528866601.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:02.261Z,1528866602.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:02.279Z,1528866602.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:02.663Z,1528866602.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:02.707Z,1528866602.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:03.054Z,1528866603.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:03.083Z,1528866603.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:03.474Z,1528866603.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:03.494Z,1528866603.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:03.876Z,1528866603.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:03.922Z,1528866603.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:04.271Z,1528866604.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:04.290Z,1528866604.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:04.660Z,1528866604.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:04.680Z,1528866604.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:05.062Z,1528866605.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:05.086Z,1528866605.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:05.451Z,1528866605.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:05.488Z,1528866605.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:05.856Z,1528866605.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:05.891Z,1528866605.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:06.255Z,1528866606.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:06.300Z,1528866606.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:06.667Z,1528866606.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:06.691Z,1528866606.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:07.075Z,1528866607.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:07.093Z,1528866607.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:07.479Z,1528866607.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:07.500Z,1528866607.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:07.855Z,1528866607.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:07.882Z,1528866607.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:08.255Z,1528866608.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:08.294Z,1528866608.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:08.656Z,1528866608.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:08.689Z,1528866608.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:09.055Z,1528866609.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:09.082Z,1528866609.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:09.472Z,1528866609.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:09.492Z,1528866609.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:09.876Z,1528866609.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:09.898Z,1528866609.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:10.266Z,1528866610.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:10.288Z,1528866610.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:10.655Z,1528866610.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:10.691Z,1528866610.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:11.055Z,1528866611.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:11.085Z,1528866611.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:11.455Z,1528866611.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:11.493Z,1528866611.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:11.856Z,1528866611.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:11.891Z,1528866611.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:12.255Z,1528866612.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:12.292Z,1528866612.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:12.671Z,1528866612.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:12.699Z,1528866612.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:13.075Z,1528866613.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:13.098Z,1528866613.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:13.476Z,1528866613.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:13.495Z,1528866613.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:13.855Z,1528866613.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:13.882Z,1528866613.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:14.254Z,1528866614.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:14.288Z,1528866614.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:14.655Z,1528866614.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:14.684Z,1528866614.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:15.055Z,1528866615.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:15.082Z,1528866615.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:15.471Z,1528866615.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:15.496Z,1528866615.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:15.876Z,1528866615.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:15.894Z,1528866615.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:16.273Z,1528866616.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:16.293Z,1528866616.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:16.656Z,1528866616.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:16.696Z,1528866616.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:17.055Z,1528866617.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:17.084Z,1528866617.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:17.471Z,1528866617.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:17.489Z,1528866617.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:17.875Z,1528866617.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:17.895Z,1528866617.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:18.277Z,1528866618.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:18.295Z,1528866618.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:18.656Z,1528866618.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:18.683Z,1528866618.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:19.055Z,1528866619.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:19.083Z,1528866619.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:19.476Z,1528866619.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:19.495Z,1528866619.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:19.870Z,1528866619.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:19.892Z,1528866619.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:20.271Z,1528866620.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:20.296Z,1528866620.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:20.656Z,1528866620.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:20.692Z,1528866620.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:21.056Z,1528866621.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:21.088Z,1528866621.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:21.472Z,1528866621.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:21.490Z,1528866621.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:21.876Z,1528866621.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:21.894Z,1528866621.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:22.261Z,1528866622.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:22.297Z,1528866622.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:22.656Z,1528866622.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:22.691Z,1528866622.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:23.055Z,1528866623.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:23.094Z,1528866623.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:23.472Z,1528866623.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:23.490Z,1528866623.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:23.874Z,1528866623.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:23.892Z,1528866623.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:24.276Z,1528866624.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:24.294Z,1528866624.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:24.652Z,1528866624.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:24.689Z,1528866624.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:25.055Z,1528866625.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:25.093Z,1528866625.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:25.469Z,1528866625.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:25.507Z,1528866625.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:25.881Z,1528866625.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:25.899Z,1528866625.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:26.269Z,1528866626.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:26.304Z,1528866626.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:26.657Z,1528866626.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:26.696Z,1528866626.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:27.059Z,1528866627.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:27.080Z,1528866627.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:27.469Z,1528866627.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:27.514Z,1528866627.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:27.871Z,1528866627.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:27.912Z,1528866627.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:28.267Z,1528866628.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:28.284Z,1528866628.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:28.662Z,1528866628.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:28.680Z,1528866628.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:29.059Z,1528866629.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:29.085Z,1528866629.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:29.471Z,1528866629.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:29.496Z,1528866629.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:29.870Z,1528866629.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:29.896Z,1528866629.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:30.271Z,1528866630.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:30.296Z,1528866630.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:30.665Z,1528866630.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:30.683Z,1528866630.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:31.061Z,1528866631.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:31.079Z,1528866631.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:31.466Z,1528866631.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:31.496Z,1528866631.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:31.871Z,1528866631.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:31.897Z,1528866631.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:32.271Z,1528866632.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:32.289Z,1528866632.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:32.656Z,1528866632.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:32.686Z,1528866632.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:33.055Z,1528866633.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:33.082Z,1528866633.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:33.470Z,1528866633.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:33.500Z,1528866633.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:33.875Z,1528866633.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:33.893Z,1528866633.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:34.271Z,1528866634.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:34.296Z,1528866634.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:34.656Z,1528866634.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:34.697Z,1528866634.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:35.055Z,1528866635.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:35.084Z,1528866635.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:35.476Z,1528866635.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:35.494Z,1528866635.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:35.875Z,1528866635.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:35.893Z,1528866635.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:36.275Z,1528866636.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:36.293Z,1528866636.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:36.652Z,1528866636.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:36.687Z,1528866636.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:37.055Z,1528866637.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:37.082Z,1528866637.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:37.476Z,1528866637.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:37.495Z,1528866637.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:37.877Z,1528866637.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:37.894Z,1528866637.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:38.272Z,1528866638.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:38.290Z,1528866638.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:38.656Z,1528866638.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:38.692Z,1528866638.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:39.051Z,1528866639.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:39.080Z,1528866639.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:39.461Z,1528866639.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:39.496Z,1528866639.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:39.869Z,1528866639.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:39.904Z,1528866639.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:40.269Z,1528866640.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:40.304Z,1528866640.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:40.659Z,1528866640.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:40.677Z,1528866640.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:41.059Z,1528866641.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:41.077Z,1528866641.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:41.466Z,1528866641.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:41.484Z,1528866641.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:41.870Z,1528866641.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:41.888Z,1528866641.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:42.270Z,1528866642.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:42.288Z,1528866642.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:42.662Z,1528866642.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:42.681Z,1528866642.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:43.061Z,1528866643.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:43.079Z,1528866643.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:43.469Z,1528866643.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:43.488Z,1528866643.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:43.866Z,1528866643.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:43.889Z,1528866643.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:44.267Z,1528866644.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:10:44.289Z,1528866644.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:44.680Z,1528866644.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:45.076Z,1528866645.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:45.489Z,1528866645.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:45.893Z,1528866645.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:46.286Z,1528866646.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:46.680Z,1528866646.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:47.089Z,1528866647.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:47.489Z,1528866647.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:47.892Z,1528866647.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:48.292Z,1528866648.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:48.681Z,1528866648.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:49.088Z,1528866649.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:49.504Z,1528866649.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:49.893Z,1528866649.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:50.296Z,1528866650.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:53.398Z,1528866653.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:53.538Z,1528866653.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:53.941Z,1528866653.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:54.348Z,1528866654.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:54.730Z,1528866654.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:55.136Z,1528866655.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:55.529Z,1528866655.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:55.938Z,1528866655.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:56.316Z,1528866656.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:56.741Z,1528866656.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:57.139Z,1528866657.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:57.539Z,1528866657.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:57.922Z,1528866657.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:58.315Z,1528866658.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:58.724Z,1528866658.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:59.120Z,1528866659.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:59.527Z,1528866659.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:10:59.931Z,1528866659.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:00.331Z,1528866660.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:00.721Z,1528866660.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:01.123Z,1528866661.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:01.531Z,1528866661.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:01.928Z,1528866661.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:02.327Z,1528866662.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:02.725Z,1528866662.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:03.120Z,1528866663.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:03.528Z,1528866663.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:03.932Z,1528866663.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:04.328Z,1528866664.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:04.724Z,1528866664.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:05.137Z,1528866665.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:05.529Z,1528866665.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:05.936Z,1528866665.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:06.337Z,1528866666.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:06.724Z,1528866666.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:07.124Z,1528866667.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:07.536Z,1528866667.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:07.940Z,1528866667.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:08.333Z,1528866668.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:08.739Z,1528866668.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:09.132Z,1528866669.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:09.535Z,1528866669.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:09.925Z,1528866669.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:11:09.943Z,1528866669.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:10.306Z,1528866670.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:11:10.344Z,1528866670.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:10.700Z,1528866670.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:11:10.726Z,1528866670.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:11.100Z,1528866671.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:11:11.118Z,1528866671.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:11.518Z,1528866671.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:11:11.545Z,1528866671.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:11.917Z,1528866671.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:11:11.944Z,1528866671.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:12.318Z,1528866672.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:11:12.347Z,1528866672.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:12.703Z,1528866672.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:11:12.744Z,1528866672.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:13.102Z,1528866673.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:11:13.121Z,1528866673.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:13.551Z,1528866673.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:13.951Z,1528866673.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:14.348Z,1528866674.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:14.720Z,1528866674.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:15.120Z,1528866675.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:15.551Z,1528866675.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:15.931Z,1528866675.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:16.328Z,1528866676.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:16.721Z,1528866676.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:17.128Z,1528866677.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:17.527Z,1528866677.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:17.930Z,1528866677.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:18.332Z,1528866678.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:18.723Z,1528866678.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:19.129Z,1528866679.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:19.531Z,1528866679.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:19.927Z,1528866679.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:20.328Z,1528866680.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:20.731Z,1528866680.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:21.120Z,1528866681.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:21.527Z,1528866681.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:21.931Z,1528866681.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:22.327Z,1528866682.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:22.729Z,1528866682.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:23.127Z,1528866683.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:23.521Z,1528866683.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:23.936Z,1528866683.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:24.329Z,1528866684.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:24.728Z,1528866684.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:25.134Z,1528866685.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:25.524Z,1528866685.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:25.923Z,1528866685.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:26.323Z,1528866686.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:26.733Z,1528866686.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:27.132Z,1528866687.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:27.532Z,1528866687.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:27.924Z,1528866687.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:28.320Z,1528866688.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:28.723Z,1528866688.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:29.123Z,1528866689.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:29.520Z,1528866689.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:29.936Z,1528866689.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:30.331Z,1528866690.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:30.728Z,1528866690.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:31.124Z,1528866691.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:31.523Z,1528866691.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:31.919Z,1528866691.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:32.322Z,1528866692.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:32.732Z,1528866692.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:33.132Z,1528866693.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:33.531Z,1528866693.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:33.919Z,1528866693.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:34.320Z,1528866694.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:34.723Z,1528866694.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:35.123Z,1528866695.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:35.529Z,1528866695.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:35.931Z,1528866695.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:36.331Z,1528866696.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:36.736Z,1528866696.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:37.123Z,1528866697.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:37.527Z,1528866697.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:37.922Z,1528866697.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:38.323Z,1528866698.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:38.732Z,1528866698.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:39.136Z,1528866699.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:39.533Z,1528866699.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:39.924Z,1528866699.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:40.323Z,1528866700.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:40.724Z,1528866700.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:41.123Z,1528866701.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:41.523Z,1528866701.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:41.931Z,1528866701.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:42.340Z,1528866702.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:42.736Z,1528866702.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:43.124Z,1528866703.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:43.523Z,1528866703.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:43.923Z,1528866703.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:44.324Z,1528866704.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:44.736Z,1528866704.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:45.136Z,1528866705.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:45.531Z,1528866705.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:45.932Z,1528866705.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:46.325Z,1528866706.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:46.724Z,1528866706.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:47.123Z,1528866707.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:47.524Z,1528866707.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:47.933Z,1528866707.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:48.344Z,1528866708.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:48.744Z,1528866708.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:48.747Z,1528866708.747 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T05:11:48.747Z,1528866708.747 [Default:CheckIn:C.Wait] Stopped
2018-06-13T05:11:48.747Z,1528866708.747 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T05:11:48.747Z,1528866708.747 [Default:CheckIn:D] Running Loop=1
2018-06-13T05:11:49.126Z,1528866709.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:49.129Z,1528866709.129 [Default:CheckIn:D] Stopped
2018-06-13T05:11:49.129Z,1528866709.129 [Default:CheckIn:E] Running Loop=1
2018-06-13T05:11:52.236Z,1528866712.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:52.239Z,1528866712.239 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 104.594735 min 
2018-06-13T05:11:52.239Z,1528866712.239 [Default:CheckIn:E] Stopped
2018-06-13T05:11:52.240Z,1528866712.240 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T05:11:52.240Z,1528866712.240 [Default:CheckIn] Stopped
2018-06-13T05:11:52.240Z,1528866712.240 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T05:11:52.240Z,1528866712.240 [Default:CheckIn](INFO): Running loop #11
2018-06-13T05:11:52.240Z,1528866712.240 [Default:CheckIn] Running Loop=11
2018-06-13T05:11:52.240Z,1528866712.240 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T05:11:52.240Z,1528866712.240 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T05:11:52.386Z,1528866712.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:52.792Z,1528866712.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:53.192Z,1528866713.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:53.583Z,1528866713.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:53.988Z,1528866713.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:54.364Z,1528866714.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:54.764Z,1528866714.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:55.182Z,1528866715.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:55.572Z,1528866715.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:55.999Z,1528866715.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:56.396Z,1528866716.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:56.804Z,1528866716.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:57.168Z,1528866717.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:57.567Z,1528866717.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:57.968Z,1528866717.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:58.367Z,1528866718.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:58.779Z,1528866718.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:59.211Z,1528866719.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:59.579Z,1528866719.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:11:59.967Z,1528866719.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:00.369Z,1528866720.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:00.772Z,1528866720.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:01.171Z,1528866721.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:01.570Z,1528866721.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:01.975Z,1528866721.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:02.378Z,1528866722.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:02.775Z,1528866722.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:03.170Z,1528866723.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:03.570Z,1528866723.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:03.980Z,1528866723.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:04.371Z,1528866724.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:04.783Z,1528866724.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:05.179Z,1528866725.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:05.576Z,1528866725.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:05.976Z,1528866725.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:06.371Z,1528866726.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:06.779Z,1528866726.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:07.173Z,1528866727.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:07.546Z,1528866727.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:07.582Z,1528866727.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:07.959Z,1528866727.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:07.978Z,1528866727.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:08.362Z,1528866728.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:08.381Z,1528866728.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:08.764Z,1528866728.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:08.783Z,1528866728.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:09.146Z,1528866729.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:09.178Z,1528866729.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:09.553Z,1528866729.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:09.571Z,1528866729.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:09.951Z,1528866729.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:09.976Z,1528866729.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:10.353Z,1528866730.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:10.370Z,1528866730.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:10.763Z,1528866730.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:10.780Z,1528866730.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:11.162Z,1528866731.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:11.188Z,1528866731.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:11.560Z,1528866731.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:11.584Z,1528866731.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:11.951Z,1528866731.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:11.973Z,1528866731.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:12.347Z,1528866732.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:12.372Z,1528866732.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:12.749Z,1528866732.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:12.767Z,1528866732.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:13.151Z,1528866733.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:13.177Z,1528866733.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:13.551Z,1528866733.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:13.585Z,1528866733.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:13.960Z,1528866733.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:13.984Z,1528866733.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:14.367Z,1528866734.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:14.385Z,1528866734.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:14.767Z,1528866734.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:14.786Z,1528866734.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:15.143Z,1528866735.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:15.170Z,1528866735.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:15.547Z,1528866735.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:15.584Z,1528866735.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:15.948Z,1528866735.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:15.989Z,1528866735.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:16.347Z,1528866736.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:16.376Z,1528866736.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:16.763Z,1528866736.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:16.780Z,1528866736.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:17.168Z,1528866737.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:17.186Z,1528866737.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:17.559Z,1528866737.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:17.578Z,1528866737.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:17.947Z,1528866737.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:17.974Z,1528866737.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:18.348Z,1528866738.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:18.390Z,1528866738.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:18.747Z,1528866738.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:18.774Z,1528866738.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:19.147Z,1528866739.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:19.174Z,1528866739.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:19.547Z,1528866739.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:19.576Z,1528866739.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:19.963Z,1528866739.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:19.981Z,1528866739.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:20.366Z,1528866740.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:20.392Z,1528866740.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:20.768Z,1528866740.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:20.786Z,1528866740.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:21.143Z,1528866741.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:21.172Z,1528866741.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:21.547Z,1528866741.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:21.580Z,1528866741.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:21.944Z,1528866741.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:21.962Z,1528866741.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:22.343Z,1528866742.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:22.362Z,1528866742.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:22.757Z,1528866742.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:22.791Z,1528866742.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:23.162Z,1528866743.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:23.190Z,1528866743.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:23.558Z,1528866743.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:23.591Z,1528866743.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:23.947Z,1528866743.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:23.964Z,1528866743.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:24.347Z,1528866744.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:24.365Z,1528866744.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:24.747Z,1528866744.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:24.764Z,1528866744.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:25.152Z,1528866745.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:25.170Z,1528866745.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:25.550Z,1528866745.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:25.568Z,1528866745.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:25.957Z,1528866745.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:25.998Z,1528866745.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:26.333Z,1528866746.333 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T05:12:26.333Z,1528866746.333 [NAL9602] Data Fault, FailCount= 5
2018-06-13T05:12:26.333Z,1528866746.333 [NAL9602](ERROR): Data Fault
2018-06-13T05:12:26.350Z,1528866746.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:26.372Z,1528866746.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:26.473Z,1528866746.473 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T05:12:26.473Z,1528866746.473 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T05:12:26.733Z,1528866746.733 [NAL9602](INFO): Powering down
2018-06-13T05:12:26.750Z,1528866746.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:26.768Z,1528866746.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:26.847Z,1528866746.847 [CBIT](INFO): Critical error at 20180613T051226
2018-06-13T05:12:27.148Z,1528866747.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:27.172Z,1528866747.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:27.552Z,1528866747.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:27.570Z,1528866747.570 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:27.570Z,1528866747.570 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2018-06-13T05:12:27.570Z,1528866747.570 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:12:27.572Z,1528866747.572 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:27.572Z,1528866747.572 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36
2018-06-13T05:12:27.572Z,1528866747.572 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:12:27.574Z,1528866747.574 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:27.574Z,1528866747.574 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2018-06-13T05:12:27.574Z,1528866747.574 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:12:27.649Z,1528866747.649 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:12:27.649Z,1528866747.649 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:12:27.650Z,1528866747.650 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:12:27.952Z,1528866747.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:28.049Z,1528866748.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:12:28.049Z,1528866748.049 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2018-06-13T05:12:28.050Z,1528866748.050 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:12:28.050Z,1528866748.050 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36
2018-06-13T05:12:28.050Z,1528866748.050 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:12:28.050Z,1528866748.050 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2018-06-13T05:12:28.348Z,1528866748.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:28.364Z,1528866748.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:12:28.365Z,1528866748.365 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:12:28.365Z,1528866748.365 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:12:28.366Z,1528866748.366 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:12:28.366Z,1528866748.366 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:12:28.366Z,1528866748.366 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:12:28.367Z,1528866748.367 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:12:28.367Z,1528866748.367 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:12:28.367Z,1528866748.367 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:12:28.746Z,1528866748.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:28.778Z,1528866748.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:12:28.779Z,1528866748.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:29.146Z,1528866749.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:29.173Z,1528866749.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:12:29.174Z,1528866749.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:29.542Z,1528866749.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:29.572Z,1528866749.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:12:29.577Z,1528866749.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:29.947Z,1528866749.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:29.984Z,1528866749.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:12:29.985Z,1528866749.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:30.342Z,1528866750.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:30.371Z,1528866750.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:12:30.372Z,1528866750.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:30.742Z,1528866750.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:30.760Z,1528866750.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:12:30.769Z,1528866750.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:31.154Z,1528866751.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:31.171Z,1528866751.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:12:31.172Z,1528866751.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:31.549Z,1528866751.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:31.566Z,1528866751.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:12:31.567Z,1528866751.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:31.947Z,1528866751.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:31.966Z,1528866751.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:12:31.967Z,1528866751.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:32.350Z,1528866752.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:32.367Z,1528866752.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:12:32.368Z,1528866752.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:32.747Z,1528866752.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:32.771Z,1528866752.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:12:32.772Z,1528866752.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:33.147Z,1528866753.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:33.165Z,1528866753.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:12:33.166Z,1528866753.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:33.549Z,1528866753.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:33.572Z,1528866753.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:12:33.573Z,1528866753.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:33.949Z,1528866753.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:33.967Z,1528866753.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:12:33.968Z,1528866753.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:34.347Z,1528866754.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:34.365Z,1528866754.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:12:34.366Z,1528866754.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:34.754Z,1528866754.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:34.771Z,1528866754.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:12:34.772Z,1528866754.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:35.149Z,1528866755.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:35.166Z,1528866755.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:12:35.167Z,1528866755.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:35.547Z,1528866755.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:35.565Z,1528866755.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:12:35.566Z,1528866755.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:35.949Z,1528866755.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:35.972Z,1528866755.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:12:35.973Z,1528866755.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:36.349Z,1528866756.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:36.366Z,1528866756.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:12:36.367Z,1528866756.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:36.748Z,1528866756.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:36.766Z,1528866756.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:12:36.767Z,1528866756.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:37.150Z,1528866757.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:37.171Z,1528866757.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:12:37.172Z,1528866757.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:37.551Z,1528866757.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:37.568Z,1528866757.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:12:37.569Z,1528866757.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:37.948Z,1528866757.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:37.966Z,1528866757.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:12:37.967Z,1528866757.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:38.351Z,1528866758.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:38.376Z,1528866758.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:12:38.381Z,1528866758.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:38.751Z,1528866758.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:38.769Z,1528866758.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:12:38.770Z,1528866758.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:39.149Z,1528866759.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:39.166Z,1528866759.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:12:39.167Z,1528866759.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:39.552Z,1528866759.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:39.570Z,1528866759.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:12:39.571Z,1528866759.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:39.952Z,1528866759.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:39.969Z,1528866759.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:12:39.970Z,1528866759.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:40.349Z,1528866760.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:40.366Z,1528866760.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T05:12:40.367Z,1528866760.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:40.752Z,1528866760.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:40.770Z,1528866760.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T05:12:40.771Z,1528866760.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:41.152Z,1528866761.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:41.169Z,1528866761.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T05:12:41.170Z,1528866761.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:41.550Z,1528866761.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:41.567Z,1528866761.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:12:41.568Z,1528866761.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:41.956Z,1528866761.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:41.973Z,1528866761.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:12:41.974Z,1528866761.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:42.353Z,1528866762.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:42.370Z,1528866762.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:12:42.371Z,1528866762.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:42.749Z,1528866762.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:42.767Z,1528866762.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:12:42.768Z,1528866762.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:43.157Z,1528866763.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:43.174Z,1528866763.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:12:43.175Z,1528866763.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:43.552Z,1528866763.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:43.570Z,1528866763.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:12:43.571Z,1528866763.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:43.946Z,1528866763.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:43.971Z,1528866763.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:12:43.972Z,1528866763.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:44.350Z,1528866764.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:44.382Z,1528866764.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:12:44.383Z,1528866764.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:44.751Z,1528866764.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:44.769Z,1528866764.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:12:44.770Z,1528866764.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:45.147Z,1528866765.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:45.166Z,1528866765.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:12:45.167Z,1528866765.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:45.550Z,1528866765.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:45.572Z,1528866765.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:12:45.574Z,1528866765.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:45.951Z,1528866765.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:45.969Z,1528866765.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:12:45.970Z,1528866765.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:46.353Z,1528866766.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:46.373Z,1528866766.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:12:46.374Z,1528866766.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:46.752Z,1528866766.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:46.776Z,1528866766.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:12:46.777Z,1528866766.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:47.151Z,1528866767.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:47.168Z,1528866767.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:12:47.169Z,1528866767.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:47.547Z,1528866767.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:47.565Z,1528866767.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T05:12:47.566Z,1528866767.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:47.942Z,1528866767.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:47.974Z,1528866767.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:48.342Z,1528866768.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:48.370Z,1528866768.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:48.741Z,1528866768.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:48.776Z,1528866768.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:49.150Z,1528866769.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:49.173Z,1528866769.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:52.260Z,1528866772.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:52.277Z,1528866772.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:52.386Z,1528866772.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:52.435Z,1528866772.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:52.793Z,1528866772.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:52.820Z,1528866772.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:53.190Z,1528866773.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:53.223Z,1528866773.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:53.586Z,1528866773.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:53.612Z,1528866773.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:53.990Z,1528866773.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:54.028Z,1528866774.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:54.386Z,1528866774.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:54.434Z,1528866774.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:54.786Z,1528866774.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:54.804Z,1528866774.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:55.189Z,1528866775.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:55.207Z,1528866775.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:55.590Z,1528866775.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:55.608Z,1528866775.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:55.990Z,1528866775.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:56.008Z,1528866776.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:56.390Z,1528866776.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:56.408Z,1528866776.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:56.794Z,1528866776.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:56.812Z,1528866776.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:57.191Z,1528866777.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:57.209Z,1528866777.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:57.593Z,1528866777.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:57.611Z,1528866777.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:57.990Z,1528866777.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:58.008Z,1528866778.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:58.394Z,1528866778.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:58.412Z,1528866778.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:58.794Z,1528866778.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:58.816Z,1528866778.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:59.193Z,1528866779.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:59.211Z,1528866779.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:59.589Z,1528866779.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:12:59.607Z,1528866779.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:12:59.994Z,1528866779.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:00.011Z,1528866780.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:00.393Z,1528866780.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:00.410Z,1528866780.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:00.789Z,1528866780.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:00.807Z,1528866780.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:01.193Z,1528866781.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:01.217Z,1528866781.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:01.593Z,1528866781.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:01.610Z,1528866781.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:01.993Z,1528866781.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:02.011Z,1528866782.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:02.393Z,1528866782.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:02.416Z,1528866782.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:02.793Z,1528866782.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:02.811Z,1528866782.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:03.189Z,1528866783.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:03.207Z,1528866783.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:03.593Z,1528866783.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:03.611Z,1528866783.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:03.993Z,1528866783.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:04.011Z,1528866784.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:04.389Z,1528866784.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:04.407Z,1528866784.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:04.794Z,1528866784.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:04.812Z,1528866784.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:05.193Z,1528866785.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:05.210Z,1528866785.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:05.589Z,1528866785.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:05.607Z,1528866785.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:05.993Z,1528866785.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:06.012Z,1528866786.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:06.393Z,1528866786.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:06.410Z,1528866786.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:06.790Z,1528866786.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:06.807Z,1528866786.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:07.193Z,1528866787.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:07.211Z,1528866787.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:07.593Z,1528866787.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:07.611Z,1528866787.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:07.993Z,1528866787.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:08.011Z,1528866788.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:08.393Z,1528866788.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:08.411Z,1528866788.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:08.794Z,1528866788.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:08.816Z,1528866788.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:09.189Z,1528866789.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:09.207Z,1528866789.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:09.594Z,1528866789.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:09.612Z,1528866789.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:09.994Z,1528866789.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:10.011Z,1528866790.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:10.389Z,1528866790.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:10.407Z,1528866790.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:10.794Z,1528866790.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:10.812Z,1528866790.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:11.212Z,1528866791.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:11.607Z,1528866791.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:12.011Z,1528866792.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:12.394Z,1528866792.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:12.412Z,1528866792.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:12.789Z,1528866792.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:12.807Z,1528866792.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:13.194Z,1528866793.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:13.211Z,1528866793.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:13.608Z,1528866793.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:14.011Z,1528866794.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:14.412Z,1528866794.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:14.794Z,1528866794.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:14.812Z,1528866794.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:15.189Z,1528866795.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:15.207Z,1528866795.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:15.594Z,1528866795.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:15.612Z,1528866795.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:15.994Z,1528866795.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:16.016Z,1528866796.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:16.393Z,1528866796.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:16.412Z,1528866796.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:16.793Z,1528866796.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:16.816Z,1528866796.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:17.193Z,1528866797.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:17.212Z,1528866797.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:17.593Z,1528866797.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:17.611Z,1528866797.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:17.993Z,1528866797.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:18.016Z,1528866798.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:18.394Z,1528866798.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:18.420Z,1528866798.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:18.793Z,1528866798.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:18.811Z,1528866798.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:19.194Z,1528866799.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:19.211Z,1528866799.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:19.593Z,1528866799.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:19.611Z,1528866799.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:19.995Z,1528866799.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:20.013Z,1528866800.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:20.395Z,1528866800.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:13:20.434Z,1528866800.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:20.813Z,1528866800.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:21.210Z,1528866801.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:21.614Z,1528866801.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:22.014Z,1528866802.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:22.410Z,1528866802.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:22.815Z,1528866802.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:23.214Z,1528866803.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:23.611Z,1528866803.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:24.016Z,1528866804.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:24.412Z,1528866804.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:24.809Z,1528866804.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:25.216Z,1528866805.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:25.611Z,1528866805.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:26.010Z,1528866806.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:26.411Z,1528866806.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:26.809Z,1528866806.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:27.210Z,1528866807.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:27.616Z,1528866807.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:28.013Z,1528866808.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:28.408Z,1528866808.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:28.811Z,1528866808.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:29.208Z,1528866809.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:29.608Z,1528866809.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:30.010Z,1528866810.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:30.409Z,1528866810.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:30.810Z,1528866810.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:31.213Z,1528866811.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:31.616Z,1528866811.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:32.010Z,1528866812.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:32.413Z,1528866812.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:32.809Z,1528866812.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:33.209Z,1528866813.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:33.613Z,1528866813.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:34.016Z,1528866814.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:34.409Z,1528866814.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:34.818Z,1528866814.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:35.214Z,1528866815.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:35.609Z,1528866815.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:36.013Z,1528866816.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:36.409Z,1528866816.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:36.810Z,1528866816.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:37.213Z,1528866817.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:37.609Z,1528866817.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:38.009Z,1528866818.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:38.413Z,1528866818.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:38.813Z,1528866818.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:39.213Z,1528866819.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:39.614Z,1528866819.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:40.009Z,1528866820.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:40.416Z,1528866820.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:40.813Z,1528866820.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:41.215Z,1528866821.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:41.614Z,1528866821.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:42.013Z,1528866822.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:42.409Z,1528866822.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:42.809Z,1528866822.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:43.213Z,1528866823.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:43.610Z,1528866823.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:44.016Z,1528866824.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:44.414Z,1528866824.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:44.809Z,1528866824.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:45.215Z,1528866825.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:45.614Z,1528866825.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:46.016Z,1528866826.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:46.417Z,1528866826.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:46.813Z,1528866826.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:47.209Z,1528866827.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:47.615Z,1528866827.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:48.013Z,1528866828.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:48.410Z,1528866828.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:48.820Z,1528866828.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:49.218Z,1528866829.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:52.323Z,1528866832.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:52.495Z,1528866832.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:52.870Z,1528866832.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:53.266Z,1528866833.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:53.667Z,1528866833.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:54.067Z,1528866834.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:54.465Z,1528866834.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:54.867Z,1528866834.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:55.267Z,1528866835.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:55.664Z,1528866835.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:56.067Z,1528866836.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:56.468Z,1528866836.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:56.872Z,1528866836.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:57.271Z,1528866837.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:57.667Z,1528866837.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:58.065Z,1528866838.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:58.467Z,1528866838.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:58.867Z,1528866838.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:59.266Z,1528866839.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:13:59.672Z,1528866839.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:00.076Z,1528866840.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:00.464Z,1528866840.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:00.867Z,1528866840.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:01.267Z,1528866841.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:01.664Z,1528866841.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:02.067Z,1528866842.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:02.466Z,1528866842.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:02.868Z,1528866842.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:03.267Z,1528866843.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:03.672Z,1528866843.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:04.067Z,1528866844.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:04.467Z,1528866844.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:04.867Z,1528866844.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:05.265Z,1528866845.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:05.667Z,1528866845.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:06.072Z,1528866846.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:06.465Z,1528866846.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:06.868Z,1528866846.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:07.267Z,1528866847.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:07.671Z,1528866847.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:08.069Z,1528866848.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:08.467Z,1528866848.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:08.867Z,1528866848.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:09.265Z,1528866849.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:09.667Z,1528866849.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:10.067Z,1528866850.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:10.467Z,1528866850.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:10.872Z,1528866850.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:11.267Z,1528866851.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:11.664Z,1528866851.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:12.066Z,1528866852.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:12.466Z,1528866852.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:12.867Z,1528866852.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:13.267Z,1528866853.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:13.672Z,1528866853.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:14.066Z,1528866854.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:14.465Z,1528866854.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:14.867Z,1528866854.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:15.264Z,1528866855.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:15.667Z,1528866855.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:16.066Z,1528866856.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:16.465Z,1528866856.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:16.866Z,1528866856.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:17.266Z,1528866857.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:17.665Z,1528866857.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:18.072Z,1528866858.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:18.466Z,1528866858.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:18.865Z,1528866858.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:19.266Z,1528866859.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:19.667Z,1528866859.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:20.066Z,1528866860.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:20.467Z,1528866860.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:20.866Z,1528866860.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:21.265Z,1528866861.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:21.666Z,1528866861.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:22.066Z,1528866862.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:22.467Z,1528866862.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:22.866Z,1528866862.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:23.266Z,1528866863.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:23.664Z,1528866863.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:24.066Z,1528866864.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:24.467Z,1528866864.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:24.866Z,1528866864.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:25.267Z,1528866865.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:25.666Z,1528866865.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:26.066Z,1528866866.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:26.473Z,1528866866.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:26.565Z,1528866866.565 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T05:14:26.565Z,1528866866.565 [NAL9602] No Fault, FailCount= 5
2018-06-13T05:14:26.833Z,1528866866.833 [NAL9602](INFO): Powering up NAL9602
2018-06-13T05:14:26.872Z,1528866866.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:27.266Z,1528866867.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:27.667Z,1528866867.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:28.067Z,1528866868.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:28.467Z,1528866868.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:28.867Z,1528866868.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:29.267Z,1528866869.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:29.665Z,1528866869.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:30.067Z,1528866870.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:30.466Z,1528866870.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:30.866Z,1528866870.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:31.268Z,1528866871.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:31.666Z,1528866871.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:32.067Z,1528866872.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:32.467Z,1528866872.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:32.866Z,1528866872.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:33.266Z,1528866873.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:33.667Z,1528866873.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:34.066Z,1528866874.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:34.467Z,1528866874.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:34.867Z,1528866874.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:35.267Z,1528866875.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:35.665Z,1528866875.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:36.068Z,1528866876.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:36.466Z,1528866876.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:36.867Z,1528866876.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:37.271Z,1528866877.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:37.678Z,1528866877.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:38.026Z,1528866878.026 [NAL9602](INFO): NAL9602 initialized
2018-06-13T05:14:38.072Z,1528866878.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:38.468Z,1528866878.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:38.899Z,1528866878.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:39.276Z,1528866879.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:39.670Z,1528866879.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:40.078Z,1528866880.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:40.468Z,1528866880.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:40.876Z,1528866880.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:41.284Z,1528866881.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:41.677Z,1528866881.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:42.070Z,1528866882.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:42.471Z,1528866882.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:42.869Z,1528866882.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:43.276Z,1528866883.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:43.683Z,1528866883.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:44.076Z,1528866884.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:44.480Z,1528866884.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:44.871Z,1528866884.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:45.269Z,1528866885.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:45.671Z,1528866885.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:46.072Z,1528866886.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:46.469Z,1528866886.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:46.879Z,1528866886.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:47.279Z,1528866887.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:47.692Z,1528866887.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:48.072Z,1528866888.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:48.476Z,1528866888.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:48.872Z,1528866888.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:49.274Z,1528866889.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:49.685Z,1528866889.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:50.084Z,1528866890.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:50.480Z,1528866890.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:53.614Z,1528866893.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:53.771Z,1528866893.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:54.168Z,1528866894.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:54.566Z,1528866894.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:54.968Z,1528866894.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:55.357Z,1528866895.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:55.743Z,1528866895.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:56.142Z,1528866896.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:56.568Z,1528866896.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:56.970Z,1528866896.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:57.369Z,1528866897.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:57.747Z,1528866897.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:58.144Z,1528866898.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:58.572Z,1528866898.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:58.955Z,1528866898.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:59.355Z,1528866899.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:14:59.743Z,1528866899.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:00.146Z,1528866900.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:00.555Z,1528866900.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:00.951Z,1528866900.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:01.351Z,1528866901.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:01.748Z,1528866901.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:02.143Z,1528866902.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:02.552Z,1528866902.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:02.955Z,1528866902.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:03.352Z,1528866903.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:03.746Z,1528866903.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:04.147Z,1528866904.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:04.553Z,1528866904.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:04.955Z,1528866904.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:05.355Z,1528866905.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:05.743Z,1528866905.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:06.146Z,1528866906.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:06.555Z,1528866906.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:06.956Z,1528866906.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:07.352Z,1528866907.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:07.758Z,1528866907.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:08.147Z,1528866908.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:08.552Z,1528866908.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:08.955Z,1528866908.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:09.352Z,1528866909.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:09.747Z,1528866909.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:10.156Z,1528866910.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:10.553Z,1528866910.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:10.955Z,1528866910.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:11.355Z,1528866911.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:11.747Z,1528866911.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:12.148Z,1528866912.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:12.555Z,1528866912.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:12.956Z,1528866912.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:13.351Z,1528866913.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:13.748Z,1528866913.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:14.144Z,1528866914.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:14.552Z,1528866914.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:14.959Z,1528866914.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:15.352Z,1528866915.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:15.747Z,1528866915.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:16.159Z,1528866916.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:16.551Z,1528866916.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:16.956Z,1528866916.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:17.355Z,1528866917.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:17.747Z,1528866917.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:18.147Z,1528866918.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:18.555Z,1528866918.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:18.956Z,1528866918.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:19.351Z,1528866919.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:19.752Z,1528866919.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:20.146Z,1528866920.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:20.556Z,1528866920.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:20.956Z,1528866920.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:21.351Z,1528866921.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:21.749Z,1528866921.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:22.160Z,1528866922.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:22.545Z,1528866922.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:22.956Z,1528866922.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:23.359Z,1528866923.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:23.760Z,1528866923.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:24.148Z,1528866924.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:24.551Z,1528866924.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:24.946Z,1528866924.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:25.361Z,1528866925.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:25.768Z,1528866925.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:26.158Z,1528866926.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:26.561Z,1528866926.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:26.962Z,1528866926.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:27.355Z,1528866927.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:27.759Z,1528866927.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:28.164Z,1528866928.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:28.558Z,1528866928.558 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:28.558Z,1528866928.558 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2018-06-13T05:15:28.558Z,1528866928.558 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:15:28.560Z,1528866928.560 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:28.560Z,1528866928.560 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37
2018-06-13T05:15:28.560Z,1528866928.560 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:15:28.562Z,1528866928.562 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:28.562Z,1528866928.562 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2018-06-13T05:15:28.562Z,1528866928.562 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:15:28.633Z,1528866928.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:15:28.633Z,1528866928.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:15:28.634Z,1528866928.634 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:15:29.046Z,1528866929.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:15:29.046Z,1528866929.046 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2018-06-13T05:15:29.047Z,1528866929.047 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:15:29.047Z,1528866929.047 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37
2018-06-13T05:15:29.047Z,1528866929.047 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:15:29.047Z,1528866929.047 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2018-06-13T05:15:29.373Z,1528866929.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:15:29.374Z,1528866929.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:15:29.374Z,1528866929.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:15:29.374Z,1528866929.374 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:15:29.375Z,1528866929.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:15:29.375Z,1528866929.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:15:29.375Z,1528866929.375 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:15:29.376Z,1528866929.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:15:29.376Z,1528866929.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:15:29.758Z,1528866929.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:15:29.759Z,1528866929.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:30.144Z,1528866930.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:15:30.145Z,1528866930.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:30.544Z,1528866930.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:15:30.546Z,1528866930.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:30.943Z,1528866930.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:15:30.944Z,1528866930.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:31.344Z,1528866931.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:15:31.345Z,1528866931.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:31.755Z,1528866931.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:15:31.756Z,1528866931.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:32.150Z,1528866932.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:15:32.151Z,1528866932.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:32.552Z,1528866932.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:15:32.554Z,1528866932.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:32.947Z,1528866932.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:15:32.948Z,1528866932.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:33.347Z,1528866933.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:15:33.348Z,1528866933.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:33.754Z,1528866933.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:15:33.755Z,1528866933.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:34.144Z,1528866934.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:15:34.145Z,1528866934.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:34.557Z,1528866934.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:15:34.558Z,1528866934.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:34.956Z,1528866934.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:15:34.957Z,1528866934.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:35.356Z,1528866935.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:15:35.357Z,1528866935.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:35.752Z,1528866935.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:15:35.753Z,1528866935.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:36.148Z,1528866936.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:15:36.149Z,1528866936.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:36.547Z,1528866936.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:15:36.548Z,1528866936.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:36.944Z,1528866936.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:15:36.945Z,1528866936.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:37.347Z,1528866937.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:15:37.348Z,1528866937.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:37.754Z,1528866937.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:15:37.755Z,1528866937.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:38.155Z,1528866938.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:15:38.155Z,1528866938.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:38.556Z,1528866938.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:15:38.557Z,1528866938.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:38.947Z,1528866938.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:15:38.947Z,1528866938.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:39.344Z,1528866939.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:15:39.344Z,1528866939.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:39.746Z,1528866939.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:15:39.747Z,1528866939.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:40.148Z,1528866940.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:15:40.149Z,1528866940.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:40.544Z,1528866940.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:15:40.544Z,1528866940.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:40.956Z,1528866940.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:15:40.957Z,1528866940.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:41.354Z,1528866941.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T05:15:41.355Z,1528866941.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:41.751Z,1528866941.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T05:15:41.752Z,1528866941.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:42.148Z,1528866942.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T05:15:42.149Z,1528866942.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:42.547Z,1528866942.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:15:42.548Z,1528866942.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:42.956Z,1528866942.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:15:42.961Z,1528866942.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:43.346Z,1528866943.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:15:43.346Z,1528866943.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:43.759Z,1528866943.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:15:43.760Z,1528866943.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:44.155Z,1528866944.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:15:44.156Z,1528866944.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:44.555Z,1528866944.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:15:44.556Z,1528866944.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:44.948Z,1528866944.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:15:44.949Z,1528866944.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:45.344Z,1528866945.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:15:45.345Z,1528866945.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:45.746Z,1528866945.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:15:45.747Z,1528866945.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:46.147Z,1528866946.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:15:46.148Z,1528866946.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:46.544Z,1528866946.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:15:46.545Z,1528866946.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:46.956Z,1528866946.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:15:46.957Z,1528866946.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:47.355Z,1528866947.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:15:47.356Z,1528866947.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:47.752Z,1528866947.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:15:47.754Z,1528866947.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:48.147Z,1528866948.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:15:48.148Z,1528866948.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:48.546Z,1528866948.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T05:15:48.547Z,1528866948.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:48.952Z,1528866948.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:49.350Z,1528866949.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:49.764Z,1528866949.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:50.160Z,1528866950.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:50.560Z,1528866950.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:53.658Z,1528866953.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:53.816Z,1528866953.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:54.205Z,1528866954.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:54.616Z,1528866954.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:55.002Z,1528866955.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:55.396Z,1528866955.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:55.792Z,1528866955.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:56.193Z,1528866956.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:56.591Z,1528866956.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:57.012Z,1528866957.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:57.401Z,1528866957.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:57.803Z,1528866957.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:58.190Z,1528866958.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:58.601Z,1528866958.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:58.993Z,1528866958.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:59.400Z,1528866959.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:15:59.803Z,1528866959.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:00.205Z,1528866960.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:00.606Z,1528866960.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:00.992Z,1528866960.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:01.392Z,1528866961.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:01.801Z,1528866961.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:02.192Z,1528866962.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:02.601Z,1528866962.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:03.005Z,1528866963.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:03.405Z,1528866963.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:03.801Z,1528866963.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:04.193Z,1528866964.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:04.593Z,1528866964.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:04.993Z,1528866964.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:05.404Z,1528866965.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:05.802Z,1528866965.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:06.206Z,1528866966.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:06.607Z,1528866966.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:06.993Z,1528866966.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:07.398Z,1528866967.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:07.794Z,1528866967.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:08.194Z,1528866968.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:08.592Z,1528866968.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:09.006Z,1528866969.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:09.412Z,1528866969.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:09.802Z,1528866969.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:10.206Z,1528866970.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:10.592Z,1528866970.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:10.993Z,1528866970.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:11.395Z,1528866971.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:11.802Z,1528866971.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:12.206Z,1528866972.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:12.608Z,1528866972.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:12.992Z,1528866972.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:13.392Z,1528866973.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:13.795Z,1528866973.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:14.205Z,1528866974.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:14.592Z,1528866974.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:15.007Z,1528866975.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:15.402Z,1528866975.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:15.806Z,1528866975.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:16.205Z,1528866976.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:16.595Z,1528866976.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:16.994Z,1528866976.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:17.400Z,1528866977.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:17.800Z,1528866977.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:18.207Z,1528866978.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:18.607Z,1528866978.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:18.994Z,1528866978.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:19.392Z,1528866979.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:19.796Z,1528866979.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:20.199Z,1528866980.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:20.605Z,1528866980.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:21.012Z,1528866981.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:21.403Z,1528866981.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:21.803Z,1528866981.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:22.193Z,1528866982.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:22.584Z,1528866982.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:22.985Z,1528866982.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:23.388Z,1528866983.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:23.795Z,1528866983.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:24.214Z,1528866984.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:24.600Z,1528866984.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:24.989Z,1528866984.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:25.396Z,1528866985.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:25.791Z,1528866985.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:26.187Z,1528866986.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:26.590Z,1528866986.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:26.000Z,1528866987.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:27.404Z,1528866987.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:27.796Z,1528866987.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:28.191Z,1528866988.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:28.591Z,1528866988.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:28.992Z,1528866988.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:29.401Z,1528866989.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:29.805Z,1528866989.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:30.205Z,1528866990.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:30.605Z,1528866990.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:30.990Z,1528866990.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:31.392Z,1528866991.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:31.791Z,1528866991.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:32.189Z,1528866992.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:32.590Z,1528866992.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:33.000Z,1528866993.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:33.401Z,1528866993.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:33.799Z,1528866993.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:34.200Z,1528866994.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:34.590Z,1528866994.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:34.992Z,1528866994.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:35.393Z,1528866995.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:35.800Z,1528866995.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:36.200Z,1528866996.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:36.605Z,1528866996.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:36.990Z,1528866996.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:37.392Z,1528866997.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:37.791Z,1528866997.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:38.199Z,1528866998.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:38.591Z,1528866998.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:39.001Z,1528866999.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:39.399Z,1528866999.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:39.799Z,1528866999.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:40.193Z,1528867000.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:40.590Z,1528867000.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:40.993Z,1528867000.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:41.395Z,1528867001.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:41.796Z,1528867001.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:42.205Z,1528867002.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:42.601Z,1528867002.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:42.989Z,1528867002.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:43.392Z,1528867003.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:43.792Z,1528867003.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:44.190Z,1528867004.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:44.592Z,1528867004.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:45.002Z,1528867005.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:45.401Z,1528867005.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:45.805Z,1528867005.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:46.192Z,1528867006.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:46.599Z,1528867006.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:47.006Z,1528867007.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:47.407Z,1528867007.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:47.808Z,1528867007.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:48.206Z,1528867008.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:48.606Z,1528867008.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:48.995Z,1528867008.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:49.395Z,1528867009.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:52.503Z,1528867012.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:52.507Z,1528867012.507 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T05:11:52.2Z
2018-06-13T05:16:52.507Z,1528867012.507 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T05:16:52.507Z,1528867012.507 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T05:16:52.634Z,1528867012.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:53.823Z,1528867013.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:54.004Z,1528867014.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:54.396Z,1528867014.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:54.776Z,1528867014.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:55.176Z,1528867015.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:55.573Z,1528867015.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:55.970Z,1528867015.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:16:56.004Z,1528867016.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:59.088Z,1528867019.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:16:59.106Z,1528867019.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:59.203Z,1528867019.203 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0044.lzma
2018-06-13T05:16:59.256Z,1528867019.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:16:59.299Z,1528867019.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:59.623Z,1528867019.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:16:59.652Z,1528867019.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:16:59.998Z,1528867019.998 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0044.lzma.bak
2018-06-13T05:16:59.998Z,1528867019.998 [DataOverHttps](INFO): SBD MOMSN=8328636
2018-06-13T05:17:00.028Z,1528867020.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:00.062Z,1528867020.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:01.964Z,1528867021.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:02.105Z,1528867022.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:02.507Z,1528867022.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:02.906Z,1528867022.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:03.300Z,1528867023.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:03.705Z,1528867023.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:04.108Z,1528867024.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:04.508Z,1528867024.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:04.915Z,1528867024.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:05.307Z,1528867025.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:09.684Z,1528867029.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:09.836Z,1528867029.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:10.339Z,1528867030.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:10.638Z,1528867030.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:11.022Z,1528867031.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:11.435Z,1528867031.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:11.855Z,1528867031.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:12.236Z,1528867032.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:12.635Z,1528867032.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:15.728Z,1528867035.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:15.820Z,1528867035.820 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180613T032335/Express0045.lzma
2018-06-13T05:17:15.880Z,1528867035.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:16.281Z,1528867036.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:16.618Z,1528867036.618 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0045.lzma.bak
2018-06-13T05:17:16.618Z,1528867036.618 [DataOverHttps](INFO): SBD MOMSN=8328639
2018-06-13T05:17:16.687Z,1528867036.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:18.608Z,1528867038.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:18.611Z,1528867038.611 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T05:17:18.611Z,1528867038.611 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T05:17:18.611Z,1528867038.611 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T05:17:18.771Z,1528867038.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:21.874Z,1528867041.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:22.027Z,1528867042.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:22.418Z,1528867042.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:22.822Z,1528867042.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:23.210Z,1528867043.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:23.613Z,1528867043.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:24.018Z,1528867044.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:24.392Z,1528867044.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:24.816Z,1528867044.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:25.228Z,1528867045.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:25.614Z,1528867045.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:25.996Z,1528867045.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:26.417Z,1528867046.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:26.801Z,1528867046.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:27.215Z,1528867047.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:27.601Z,1528867047.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:28.031Z,1528867048.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:28.430Z,1528867048.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:28.831Z,1528867048.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:29.199Z,1528867049.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:29.600Z,1528867049.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:30.000Z,1528867050.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:30.400Z,1528867050.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:30.811Z,1528867050.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:31.211Z,1528867051.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:31.608Z,1528867051.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:32.002Z,1528867052.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:32.385Z,1528867052.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:32.403Z,1528867052.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:32.790Z,1528867052.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:32.807Z,1528867052.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:33.193Z,1528867053.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:33.211Z,1528867053.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:33.593Z,1528867053.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:33.612Z,1528867053.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:33.978Z,1528867053.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:34.008Z,1528867054.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:34.386Z,1528867054.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:34.404Z,1528867054.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:34.793Z,1528867054.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:34.811Z,1528867054.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:35.193Z,1528867055.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:35.211Z,1528867055.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:35.590Z,1528867055.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:35.612Z,1528867055.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:35.983Z,1528867055.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:36.009Z,1528867056.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:36.386Z,1528867056.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:36.403Z,1528867056.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:36.794Z,1528867056.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:36.811Z,1528867056.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:37.195Z,1528867057.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:37.220Z,1528867057.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:37.591Z,1528867057.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:37.609Z,1528867057.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:37.983Z,1528867057.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:38.006Z,1528867058.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:38.383Z,1528867058.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:38.408Z,1528867058.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:38.791Z,1528867058.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:38.809Z,1528867058.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:39.197Z,1528867059.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:39.215Z,1528867059.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:39.595Z,1528867059.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:39.612Z,1528867059.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:39.986Z,1528867059.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:40.004Z,1528867060.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:40.383Z,1528867060.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:40.405Z,1528867060.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:40.795Z,1528867060.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:40.813Z,1528867060.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:41.196Z,1528867061.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:41.213Z,1528867061.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:41.598Z,1528867061.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:41.620Z,1528867061.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:41.976Z,1528867061.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:42.015Z,1528867062.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:42.375Z,1528867062.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:42.466Z,1528867062.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:42.790Z,1528867062.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:42.843Z,1528867062.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:43.199Z,1528867063.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:43.225Z,1528867063.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:43.585Z,1528867063.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:43.619Z,1528867063.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:43.980Z,1528867063.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:44.015Z,1528867064.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:44.379Z,1528867064.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:44.413Z,1528867064.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:44.785Z,1528867064.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:44.824Z,1528867064.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:45.198Z,1528867065.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:45.216Z,1528867065.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:45.601Z,1528867065.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:45.619Z,1528867065.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:45.977Z,1528867065.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:46.015Z,1528867066.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:46.383Z,1528867066.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:46.423Z,1528867066.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:46.794Z,1528867066.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:46.823Z,1528867066.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:47.193Z,1528867067.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:47.220Z,1528867067.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:47.589Z,1528867067.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:47.627Z,1528867067.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:47.984Z,1528867067.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:48.002Z,1528867068.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:48.382Z,1528867068.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:48.421Z,1528867068.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:48.796Z,1528867068.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:48.820Z,1528867068.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:49.195Z,1528867069.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:49.213Z,1528867069.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:49.596Z,1528867069.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:49.620Z,1528867069.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:49.985Z,1528867069.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:50.004Z,1528867070.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:50.383Z,1528867070.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:50.408Z,1528867070.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:50.792Z,1528867070.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:50.810Z,1528867070.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:51.198Z,1528867071.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:51.216Z,1528867071.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:51.599Z,1528867071.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:51.618Z,1528867071.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:51.986Z,1528867071.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:52.004Z,1528867072.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:52.382Z,1528867072.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:52.405Z,1528867072.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:52.798Z,1528867072.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:52.833Z,1528867072.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:53.196Z,1528867073.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:53.219Z,1528867073.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:53.590Z,1528867073.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:53.612Z,1528867073.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:53.980Z,1528867073.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:54.013Z,1528867074.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:54.379Z,1528867074.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:54.407Z,1528867074.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:54.800Z,1528867074.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:54.818Z,1528867074.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:55.200Z,1528867075.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:55.218Z,1528867075.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:55.597Z,1528867075.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:55.615Z,1528867075.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:55.980Z,1528867075.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:56.008Z,1528867076.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:56.391Z,1528867076.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:56.416Z,1528867076.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:56.797Z,1528867076.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:56.820Z,1528867076.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:57.199Z,1528867077.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:57.217Z,1528867077.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:57.598Z,1528867077.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:57.624Z,1528867077.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:57.976Z,1528867077.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:58.006Z,1528867078.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:58.379Z,1528867078.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:58.407Z,1528867078.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:58.801Z,1528867078.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:58.825Z,1528867078.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:59.200Z,1528867079.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:59.218Z,1528867079.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:59.596Z,1528867079.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:17:59.615Z,1528867079.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:17:59.980Z,1528867079.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:00.020Z,1528867080.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:00.379Z,1528867080.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:00.416Z,1528867080.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:00.789Z,1528867080.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:00.817Z,1528867080.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:01.193Z,1528867081.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:01.223Z,1528867081.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:01.589Z,1528867081.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:01.619Z,1528867081.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:01.980Z,1528867081.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:02.013Z,1528867082.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:02.380Z,1528867082.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:02.398Z,1528867082.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:02.789Z,1528867082.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:02.823Z,1528867082.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:03.193Z,1528867083.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:03.231Z,1528867083.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:03.593Z,1528867083.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:03.611Z,1528867083.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:03.984Z,1528867083.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:04.002Z,1528867084.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:04.384Z,1528867084.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:04.402Z,1528867084.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:04.793Z,1528867084.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:04.811Z,1528867084.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:05.189Z,1528867085.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:05.213Z,1528867085.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:05.590Z,1528867085.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:05.607Z,1528867085.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:05.984Z,1528867085.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:06.014Z,1528867086.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:06.385Z,1528867086.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:06.403Z,1528867086.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:06.790Z,1528867086.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:06.808Z,1528867086.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:07.193Z,1528867087.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:07.211Z,1528867087.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:07.590Z,1528867087.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:07.607Z,1528867087.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:07.983Z,1528867087.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:08.005Z,1528867088.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:08.386Z,1528867088.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:08.403Z,1528867088.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:08.779Z,1528867088.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:08.802Z,1528867088.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:09.190Z,1528867089.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:09.212Z,1528867089.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:09.593Z,1528867089.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:09.611Z,1528867089.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:09.991Z,1528867089.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:10.009Z,1528867090.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:10.383Z,1528867090.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:10.405Z,1528867090.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:10.786Z,1528867090.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:10.803Z,1528867090.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:11.179Z,1528867091.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:11.207Z,1528867091.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:11.584Z,1528867091.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:11.602Z,1528867091.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:11.993Z,1528867091.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:12.011Z,1528867092.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:12.390Z,1528867092.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:12.412Z,1528867092.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:12.790Z,1528867092.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:12.812Z,1528867092.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:13.186Z,1528867093.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:13.204Z,1528867093.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:13.579Z,1528867093.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:13.602Z,1528867093.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:13.983Z,1528867093.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:14.014Z,1528867094.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:14.386Z,1528867094.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:14.404Z,1528867094.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:14.782Z,1528867094.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:14.799Z,1528867094.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:15.190Z,1528867095.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:15.207Z,1528867095.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:15.594Z,1528867095.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:15.611Z,1528867095.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:15.991Z,1528867095.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:16.016Z,1528867096.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:16.388Z,1528867096.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:16.405Z,1528867096.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:16.786Z,1528867096.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:16.804Z,1528867096.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:17.179Z,1528867097.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:17.217Z,1528867097.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:17.585Z,1528867097.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:17.602Z,1528867097.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:17.995Z,1528867097.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:18.013Z,1528867098.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:18.394Z,1528867098.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:18.416Z,1528867098.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:18.794Z,1528867098.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:18.816Z,1528867098.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:19.186Z,1528867099.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:19.204Z,1528867099.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:22.301Z,1528867102.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:22.319Z,1528867102.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:22.455Z,1528867102.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:22.499Z,1528867102.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:22.869Z,1528867102.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:22.896Z,1528867102.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:23.269Z,1528867103.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:23.295Z,1528867103.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:23.661Z,1528867103.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:23.695Z,1528867103.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:24.051Z,1528867104.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:24.069Z,1528867104.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:24.449Z,1528867104.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:24.467Z,1528867104.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:24.861Z,1528867104.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:24.879Z,1528867104.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:25.261Z,1528867105.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:25.279Z,1528867105.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:25.654Z,1528867105.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:25.672Z,1528867105.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:26.052Z,1528867106.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:26.071Z,1528867106.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:26.452Z,1528867106.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:26.478Z,1528867106.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:26.858Z,1528867106.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:26.876Z,1528867106.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:27.261Z,1528867107.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:27.279Z,1528867107.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:27.661Z,1528867107.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:27.679Z,1528867107.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:28.046Z,1528867108.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:28.079Z,1528867108.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:28.451Z,1528867108.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:28.485Z,1528867108.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:28.863Z,1528867108.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:28.881Z,1528867108.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:29.261Z,1528867109.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:29.279Z,1528867109.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:29.662Z,1528867109.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:29.684Z,1528867109.684 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:29.684Z,1528867109.684 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2018-06-13T05:18:29.684Z,1528867109.684 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:18:29.686Z,1528867109.686 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:29.686Z,1528867109.686 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38
2018-06-13T05:18:29.686Z,1528867109.686 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:18:29.688Z,1528867109.688 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:29.688Z,1528867109.688 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2018-06-13T05:18:29.688Z,1528867109.688 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:18:29.777Z,1528867109.777 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:18:29.777Z,1528867109.777 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:18:29.778Z,1528867109.778 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:18:30.048Z,1528867110.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:30.161Z,1528867110.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:18:30.161Z,1528867110.161 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2018-06-13T05:18:30.161Z,1528867110.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:18:30.162Z,1528867110.162 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38
2018-06-13T05:18:30.162Z,1528867110.162 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:18:30.162Z,1528867110.162 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2018-06-13T05:18:30.443Z,1528867110.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:30.479Z,1528867110.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:18:30.479Z,1528867110.479 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:18:30.480Z,1528867110.480 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:18:30.480Z,1528867110.480 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:18:30.485Z,1528867110.485 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:18:30.485Z,1528867110.485 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:18:30.485Z,1528867110.485 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:18:30.486Z,1528867110.486 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:18:30.486Z,1528867110.486 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:18:30.857Z,1528867110.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:30.894Z,1528867110.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:18:30.895Z,1528867110.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:31.269Z,1528867111.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:31.286Z,1528867111.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:18:31.287Z,1528867111.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:31.668Z,1528867111.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:31.685Z,1528867111.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:18:31.686Z,1528867111.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:32.048Z,1528867112.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:32.078Z,1528867112.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:18:32.079Z,1528867112.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:32.447Z,1528867112.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:32.481Z,1528867112.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:18:32.482Z,1528867112.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:32.858Z,1528867112.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:32.892Z,1528867112.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:18:32.897Z,1528867112.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:33.265Z,1528867113.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:33.292Z,1528867113.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:18:33.293Z,1528867113.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:33.665Z,1528867113.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:33.695Z,1528867113.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:18:33.695Z,1528867113.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:34.051Z,1528867114.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:34.068Z,1528867114.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:18:34.069Z,1528867114.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:34.449Z,1528867114.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:34.467Z,1528867114.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:18:34.468Z,1528867114.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:34.862Z,1528867114.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:34.895Z,1528867114.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:18:34.896Z,1528867114.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:35.262Z,1528867115.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:35.279Z,1528867115.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:18:35.280Z,1528867115.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:35.658Z,1528867115.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:35.676Z,1528867115.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:18:35.677Z,1528867115.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:36.052Z,1528867116.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:36.082Z,1528867116.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:18:36.083Z,1528867116.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:36.454Z,1528867116.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:36.471Z,1528867116.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:18:36.472Z,1528867116.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:36.858Z,1528867116.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:36.875Z,1528867116.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:18:36.876Z,1528867116.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:37.262Z,1528867117.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:37.279Z,1528867117.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:18:37.280Z,1528867117.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:37.658Z,1528867117.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:37.676Z,1528867117.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:18:37.678Z,1528867117.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:38.054Z,1528867118.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:38.071Z,1528867118.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:18:38.072Z,1528867118.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:38.451Z,1528867118.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:38.484Z,1528867118.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:18:38.485Z,1528867118.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:38.858Z,1528867118.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:38.876Z,1528867118.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:18:38.876Z,1528867118.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:39.261Z,1528867119.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:39.279Z,1528867119.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:18:39.280Z,1528867119.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:39.661Z,1528867119.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:39.679Z,1528867119.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:18:39.680Z,1528867119.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:40.054Z,1528867120.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:40.071Z,1528867120.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:18:40.072Z,1528867120.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:40.451Z,1528867120.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:40.473Z,1528867120.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:18:40.474Z,1528867120.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:40.867Z,1528867120.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:40.885Z,1528867120.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:18:40.886Z,1528867120.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:41.264Z,1528867121.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:41.288Z,1528867121.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:18:41.289Z,1528867121.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:41.664Z,1528867121.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:41.681Z,1528867121.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:18:41.682Z,1528867121.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:42.044Z,1528867122.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:42.075Z,1528867122.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:18:42.076Z,1528867122.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:42.443Z,1528867122.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:42.474Z,1528867122.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T05:18:42.475Z,1528867122.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:42.864Z,1528867122.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:42.882Z,1528867122.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T05:18:42.883Z,1528867122.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:43.262Z,1528867123.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:43.295Z,1528867123.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T05:18:43.296Z,1528867123.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:43.658Z,1528867123.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:43.681Z,1528867123.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:18:43.682Z,1528867123.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:44.048Z,1528867124.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:44.078Z,1528867124.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:18:44.079Z,1528867124.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:44.443Z,1528867124.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:44.484Z,1528867124.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:18:44.489Z,1528867124.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:44.854Z,1528867124.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:44.890Z,1528867124.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:18:44.891Z,1528867124.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:45.270Z,1528867125.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:45.287Z,1528867125.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:18:45.288Z,1528867125.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:45.656Z,1528867125.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:45.684Z,1528867125.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:18:45.685Z,1528867125.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:46.048Z,1528867126.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:46.079Z,1528867126.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:18:46.080Z,1528867126.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:46.447Z,1528867126.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:46.490Z,1528867126.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:18:46.491Z,1528867126.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:46.864Z,1528867126.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:46.883Z,1528867126.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:18:46.884Z,1528867126.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:47.257Z,1528867127.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:47.291Z,1528867127.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:18:47.292Z,1528867127.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:47.657Z,1528867127.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:47.688Z,1528867127.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:18:47.689Z,1528867127.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:48.051Z,1528867128.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:48.068Z,1528867128.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:18:48.068Z,1528867128.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:48.447Z,1528867128.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:48.464Z,1528867128.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:18:48.465Z,1528867128.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:48.865Z,1528867128.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:48.892Z,1528867128.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:18:48.894Z,1528867128.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:49.265Z,1528867129.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:49.293Z,1528867129.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:18:49.294Z,1528867129.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:49.665Z,1528867129.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:49.692Z,1528867129.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:50.052Z,1528867130.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:50.070Z,1528867130.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:50.450Z,1528867130.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:50.467Z,1528867130.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:50.861Z,1528867130.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:50.895Z,1528867130.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:51.261Z,1528867131.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:51.279Z,1528867131.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:51.657Z,1528867131.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:51.680Z,1528867131.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:52.052Z,1528867132.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:52.071Z,1528867132.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:52.452Z,1528867132.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:52.470Z,1528867132.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:52.854Z,1528867132.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:52.871Z,1528867132.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:53.254Z,1528867133.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:53.276Z,1528867133.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:53.661Z,1528867133.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:53.679Z,1528867133.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:54.057Z,1528867134.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:54.080Z,1528867134.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:54.452Z,1528867134.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:54.470Z,1528867134.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:54.852Z,1528867134.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:54.870Z,1528867134.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:55.253Z,1528867135.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:55.271Z,1528867135.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:55.650Z,1528867135.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:55.667Z,1528867135.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:56.058Z,1528867136.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:56.076Z,1528867136.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:56.461Z,1528867136.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:56.478Z,1528867136.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:56.854Z,1528867136.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:56.877Z,1528867136.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:57.252Z,1528867137.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:57.276Z,1528867137.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:57.654Z,1528867137.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:57.671Z,1528867137.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:58.049Z,1528867138.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:58.067Z,1528867138.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:58.453Z,1528867138.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:58.471Z,1528867138.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:58.852Z,1528867138.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:58.870Z,1528867138.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:59.258Z,1528867139.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:59.275Z,1528867139.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:18:59.662Z,1528867139.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:18:59.680Z,1528867139.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:00.057Z,1528867140.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:00.080Z,1528867140.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:00.452Z,1528867140.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:00.470Z,1528867140.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:00.852Z,1528867140.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:00.876Z,1528867140.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:01.253Z,1528867141.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:01.271Z,1528867141.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:01.652Z,1528867141.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:01.671Z,1528867141.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:02.057Z,1528867142.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:02.075Z,1528867142.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:02.461Z,1528867142.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:02.478Z,1528867142.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:02.858Z,1528867142.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:02.875Z,1528867142.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:03.252Z,1528867143.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:03.270Z,1528867143.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:03.650Z,1528867143.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:03.667Z,1528867143.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:04.052Z,1528867144.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:04.076Z,1528867144.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:04.452Z,1528867144.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:04.471Z,1528867144.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:04.853Z,1528867144.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:04.870Z,1528867144.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:05.258Z,1528867145.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:05.275Z,1528867145.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:05.661Z,1528867145.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:05.679Z,1528867145.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:06.057Z,1528867146.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:06.075Z,1528867146.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:06.452Z,1528867146.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:06.479Z,1528867146.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:06.852Z,1528867146.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:06.869Z,1528867146.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:07.255Z,1528867147.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:07.272Z,1528867147.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:07.652Z,1528867147.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:07.670Z,1528867147.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:08.057Z,1528867148.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:08.075Z,1528867148.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:08.461Z,1528867148.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:08.478Z,1528867148.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:08.858Z,1528867148.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:08.875Z,1528867148.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:09.253Z,1528867149.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:09.275Z,1528867149.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:09.653Z,1528867149.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:09.671Z,1528867149.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:10.053Z,1528867150.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:10.071Z,1528867150.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:10.452Z,1528867150.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:10.484Z,1528867150.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:10.847Z,1528867150.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:10.873Z,1528867150.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:11.262Z,1528867151.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:11.280Z,1528867151.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:11.662Z,1528867151.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:11.684Z,1528867151.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:12.064Z,1528867152.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:12.081Z,1528867152.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:12.454Z,1528867152.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:12.471Z,1528867152.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:12.854Z,1528867152.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:12.871Z,1528867152.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:13.255Z,1528867153.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:13.273Z,1528867153.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:13.653Z,1528867153.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:13.671Z,1528867153.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:14.063Z,1528867154.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:14.081Z,1528867154.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:14.463Z,1528867154.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:14.481Z,1528867154.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:14.863Z,1528867154.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:14.888Z,1528867154.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:15.253Z,1528867155.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:15.271Z,1528867155.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:15.643Z,1528867155.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:15.671Z,1528867155.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:16.053Z,1528867156.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:16.072Z,1528867156.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:16.451Z,1528867156.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:16.474Z,1528867156.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:16.854Z,1528867156.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:16.876Z,1528867156.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:17.262Z,1528867157.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:17.280Z,1528867157.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:17.666Z,1528867157.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:17.683Z,1528867157.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:18.066Z,1528867158.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:18.085Z,1528867158.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:18.453Z,1528867158.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:18.471Z,1528867158.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:18.858Z,1528867158.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:18.876Z,1528867158.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:19.260Z,1528867159.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:19.278Z,1528867159.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:22.366Z,1528867162.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:22.388Z,1528867162.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:22.533Z,1528867162.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:22.562Z,1528867162.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:22.929Z,1528867162.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:22.967Z,1528867162.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:23.329Z,1528867163.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:23.366Z,1528867163.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:23.716Z,1528867163.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:23.733Z,1528867163.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:24.116Z,1528867164.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:24.150Z,1528867164.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:24.517Z,1528867164.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:24.535Z,1528867164.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:24.927Z,1528867164.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:24.945Z,1528867164.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:25.328Z,1528867165.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:25.352Z,1528867165.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:25.727Z,1528867165.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:25.744Z,1528867165.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:26.115Z,1528867166.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:26.138Z,1528867166.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:26.519Z,1528867166.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:26.541Z,1528867166.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:26.918Z,1528867166.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:26.936Z,1528867166.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:27.326Z,1528867167.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:27.344Z,1528867167.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:27.730Z,1528867167.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:27.752Z,1528867167.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:28.127Z,1528867168.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:28.145Z,1528867168.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:28.515Z,1528867168.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:28.545Z,1528867168.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:28.920Z,1528867168.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:28.943Z,1528867168.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:29.319Z,1528867169.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:29.336Z,1528867169.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:29.715Z,1528867169.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:29.749Z,1528867169.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:30.133Z,1528867170.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:30.151Z,1528867170.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:30.528Z,1528867170.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:30.552Z,1528867170.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:30.928Z,1528867170.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:19:30.947Z,1528867170.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:31.349Z,1528867171.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:31.737Z,1528867171.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:32.136Z,1528867172.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:32.556Z,1528867172.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:32.932Z,1528867172.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:33.346Z,1528867173.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:33.765Z,1528867173.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:34.145Z,1528867174.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:34.540Z,1528867174.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:34.949Z,1528867174.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:35.325Z,1528867175.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:35.737Z,1528867175.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:36.153Z,1528867176.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:36.551Z,1528867176.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:36.958Z,1528867176.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:37.333Z,1528867177.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:37.727Z,1528867177.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:38.132Z,1528867178.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:38.540Z,1528867178.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:38.931Z,1528867178.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:39.343Z,1528867179.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:39.743Z,1528867179.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:40.139Z,1528867180.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:40.534Z,1528867180.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:40.934Z,1528867180.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:41.331Z,1528867181.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:41.733Z,1528867181.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:42.143Z,1528867182.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:42.544Z,1528867182.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:42.939Z,1528867182.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:43.338Z,1528867183.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:43.731Z,1528867183.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:44.134Z,1528867184.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:44.534Z,1528867184.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:44.931Z,1528867184.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:45.340Z,1528867185.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:45.743Z,1528867185.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:46.139Z,1528867186.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:46.540Z,1528867186.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:46.940Z,1528867186.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:47.332Z,1528867187.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:47.733Z,1528867187.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:48.147Z,1528867188.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:48.543Z,1528867188.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:48.944Z,1528867188.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:49.335Z,1528867189.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:49.732Z,1528867189.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:50.136Z,1528867190.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:50.535Z,1528867190.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:50.940Z,1528867190.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:51.344Z,1528867191.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:51.743Z,1528867191.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:52.146Z,1528867192.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:52.536Z,1528867192.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:52.939Z,1528867192.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:53.336Z,1528867193.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:53.736Z,1528867193.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:54.146Z,1528867194.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:54.548Z,1528867194.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:54.948Z,1528867194.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:55.339Z,1528867195.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:55.740Z,1528867195.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:56.137Z,1528867196.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:56.537Z,1528867196.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:56.940Z,1528867196.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:57.345Z,1528867197.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:57.750Z,1528867197.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:58.148Z,1528867198.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:58.536Z,1528867198.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:58.942Z,1528867198.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:59.333Z,1528867199.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:19:59.745Z,1528867199.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:00.150Z,1528867200.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:00.546Z,1528867200.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:00.944Z,1528867200.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:01.354Z,1528867201.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:01.737Z,1528867201.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:02.136Z,1528867202.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:02.540Z,1528867202.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:02.936Z,1528867202.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:03.345Z,1528867203.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:03.751Z,1528867203.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:04.145Z,1528867204.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:04.536Z,1528867204.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:04.939Z,1528867204.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:05.340Z,1528867205.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:05.735Z,1528867205.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:06.151Z,1528867206.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:06.551Z,1528867206.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:06.945Z,1528867206.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:07.344Z,1528867207.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:07.745Z,1528867207.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:08.152Z,1528867208.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:08.548Z,1528867208.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:08.947Z,1528867208.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:09.348Z,1528867209.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:09.751Z,1528867209.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:10.153Z,1528867210.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:10.549Z,1528867210.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:10.911Z,1528867210.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:20:10.946Z,1528867210.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:11.316Z,1528867211.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:20:11.358Z,1528867211.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:11.711Z,1528867211.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:20:11.728Z,1528867211.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:12.121Z,1528867212.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:20:12.160Z,1528867212.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:12.529Z,1528867212.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:20:12.557Z,1528867212.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:12.921Z,1528867212.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:20:12.956Z,1528867212.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:13.316Z,1528867213.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:20:13.334Z,1528867213.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:13.710Z,1528867213.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:20:13.728Z,1528867213.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:14.114Z,1528867214.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:20:14.132Z,1528867214.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:14.532Z,1528867214.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:14.927Z,1528867214.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:15.360Z,1528867215.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:15.743Z,1528867215.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:16.135Z,1528867216.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:16.534Z,1528867216.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:16.940Z,1528867216.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:17.331Z,1528867217.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:17.740Z,1528867217.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:18.148Z,1528867218.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:18.543Z,1528867218.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:18.947Z,1528867218.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:19.336Z,1528867219.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:22.446Z,1528867222.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:22.604Z,1528867222.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:23.030Z,1528867223.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:23.428Z,1528867223.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:23.807Z,1528867223.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:24.201Z,1528867224.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:24.596Z,1528867224.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:24.995Z,1528867224.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:25.425Z,1528867225.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:25.803Z,1528867225.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:26.208Z,1528867226.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:26.602Z,1528867226.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:26.995Z,1528867226.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:27.398Z,1528867227.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:27.799Z,1528867227.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:28.210Z,1528867228.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:28.607Z,1528867228.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:29.012Z,1528867229.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:29.399Z,1528867229.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:29.798Z,1528867229.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:30.201Z,1528867230.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:30.596Z,1528867230.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:30.000Z,1528867231.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:31.432Z,1528867231.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:31.807Z,1528867231.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:32.205Z,1528867232.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:32.600Z,1528867232.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:33.013Z,1528867233.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:33.401Z,1528867233.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:33.816Z,1528867233.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:34.216Z,1528867234.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:34.620Z,1528867234.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:35.015Z,1528867235.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:35.406Z,1528867235.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:35.804Z,1528867235.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:36.209Z,1528867236.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:36.604Z,1528867236.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:37.008Z,1528867237.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:37.419Z,1528867237.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:37.816Z,1528867237.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:38.212Z,1528867238.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:38.609Z,1528867238.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:38.996Z,1528867238.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:39.398Z,1528867239.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:39.798Z,1528867239.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:40.223Z,1528867240.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:40.629Z,1528867240.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:41.008Z,1528867241.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:41.404Z,1528867241.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:41.802Z,1528867241.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:42.204Z,1528867242.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:42.601Z,1528867242.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:43.001Z,1528867243.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:43.416Z,1528867243.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:43.808Z,1528867243.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:44.209Z,1528867244.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:44.614Z,1528867244.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:44.996Z,1528867244.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:45.402Z,1528867245.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:45.803Z,1528867245.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:46.208Z,1528867246.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:46.608Z,1528867246.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:47.016Z,1528867247.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:47.395Z,1528867247.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:47.799Z,1528867247.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:48.200Z,1528867248.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:48.604Z,1528867248.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:49.001Z,1528867249.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:49.414Z,1528867249.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:49.809Z,1528867249.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:50.216Z,1528867250.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:50.604Z,1528867250.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:51.001Z,1528867251.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:51.405Z,1528867251.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:51.804Z,1528867251.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:52.206Z,1528867252.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:52.620Z,1528867252.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:53.014Z,1528867253.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:53.398Z,1528867253.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:53.804Z,1528867253.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:54.206Z,1528867254.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:54.604Z,1528867254.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:55.002Z,1528867255.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:55.413Z,1528867255.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:55.820Z,1528867255.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:56.211Z,1528867256.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:56.599Z,1528867256.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:56.996Z,1528867256.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:57.399Z,1528867257.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:57.799Z,1528867257.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:58.208Z,1528867258.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:58.616Z,1528867258.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:59.010Z,1528867259.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:59.400Z,1528867259.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:20:59.795Z,1528867259.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:00.199Z,1528867260.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:00.596Z,1528867260.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:01.001Z,1528867261.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:01.410Z,1528867261.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:01.805Z,1528867261.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:02.205Z,1528867262.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:02.599Z,1528867262.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:02.996Z,1528867262.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:03.400Z,1528867263.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:03.800Z,1528867263.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:04.205Z,1528867264.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:04.607Z,1528867264.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:05.012Z,1528867265.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:05.396Z,1528867265.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:05.801Z,1528867265.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:06.199Z,1528867266.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:06.598Z,1528867266.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:06.000Z,1528867267.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:07.407Z,1528867267.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:07.832Z,1528867267.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:08.205Z,1528867268.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:08.602Z,1528867268.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:08.999Z,1528867268.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:09.400Z,1528867269.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:09.804Z,1528867269.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:10.205Z,1528867270.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:10.607Z,1528867270.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:11.004Z,1528867271.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:11.402Z,1528867271.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:11.800Z,1528867271.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:12.199Z,1528867272.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:12.600Z,1528867272.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:12.998Z,1528867272.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:13.405Z,1528867273.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:13.807Z,1528867273.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:14.205Z,1528867274.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:14.599Z,1528867274.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:14.999Z,1528867274.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:15.404Z,1528867275.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:15.799Z,1528867275.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:16.208Z,1528867276.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:16.607Z,1528867276.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:17.016Z,1528867277.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:17.400Z,1528867277.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:17.800Z,1528867277.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:18.195Z,1528867278.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:18.603Z,1528867278.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:19.002Z,1528867279.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:19.438Z,1528867279.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:22.549Z,1528867282.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:22.702Z,1528867282.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:23.090Z,1528867283.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:23.489Z,1528867283.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:23.884Z,1528867283.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:24.297Z,1528867284.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:24.698Z,1528867284.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:25.092Z,1528867285.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:25.487Z,1528867285.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:25.884Z,1528867285.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:26.284Z,1528867286.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:26.744Z,1528867286.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:27.084Z,1528867287.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:27.502Z,1528867287.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:27.904Z,1528867287.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:28.294Z,1528867288.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:28.685Z,1528867288.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:29.086Z,1528867289.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:29.489Z,1528867289.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:29.885Z,1528867289.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:30.299Z,1528867290.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:30.698Z,1528867290.698 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:30.698Z,1528867290.698 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2018-06-13T05:21:30.698Z,1528867290.698 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:21:30.700Z,1528867290.700 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:30.700Z,1528867290.700 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39
2018-06-13T05:21:30.700Z,1528867290.700 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:21:30.702Z,1528867290.702 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:30.702Z,1528867290.702 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2018-06-13T05:21:30.702Z,1528867290.702 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:21:30.781Z,1528867290.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:21:30.781Z,1528867290.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:21:30.782Z,1528867290.782 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:21:31.177Z,1528867291.177 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:21:31.177Z,1528867291.177 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2018-06-13T05:21:31.177Z,1528867291.177 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:21:31.178Z,1528867291.178 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39
2018-06-13T05:21:31.178Z,1528867291.178 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:21:31.178Z,1528867291.178 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2018-06-13T05:21:31.494Z,1528867291.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:21:31.495Z,1528867291.495 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:21:31.495Z,1528867291.495 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:21:31.495Z,1528867291.495 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:21:31.496Z,1528867291.496 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:21:31.496Z,1528867291.496 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:21:31.496Z,1528867291.496 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:21:31.497Z,1528867291.497 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:21:31.497Z,1528867291.497 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:21:31.876Z,1528867291.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:21:31.897Z,1528867291.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:32.277Z,1528867292.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:21:32.278Z,1528867292.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:32.710Z,1528867292.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:21:32.711Z,1528867292.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:33.080Z,1528867293.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:21:33.081Z,1528867293.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:33.504Z,1528867293.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:21:33.506Z,1528867293.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:33.902Z,1528867293.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:21:33.903Z,1528867293.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:34.304Z,1528867294.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:21:34.305Z,1528867294.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:34.684Z,1528867294.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:21:34.701Z,1528867294.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:35.084Z,1528867295.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:21:35.085Z,1528867295.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:35.481Z,1528867295.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:21:35.482Z,1528867295.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:35.880Z,1528867295.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:21:35.880Z,1528867295.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:36.310Z,1528867296.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:21:36.311Z,1528867296.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:36.707Z,1528867296.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:21:36.708Z,1528867296.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:37.106Z,1528867297.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:21:37.107Z,1528867297.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:37.483Z,1528867297.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:21:37.484Z,1528867297.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:37.880Z,1528867297.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:21:37.881Z,1528867297.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:38.284Z,1528867298.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:21:38.285Z,1528867298.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:38.681Z,1528867298.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:21:38.682Z,1528867298.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:39.085Z,1528867299.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:21:39.086Z,1528867299.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:39.503Z,1528867299.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:21:39.504Z,1528867299.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:39.890Z,1528867299.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:21:39.891Z,1528867299.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:40.287Z,1528867300.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:21:40.288Z,1528867300.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:40.684Z,1528867300.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:21:40.686Z,1528867300.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:41.101Z,1528867301.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:21:41.102Z,1528867301.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:41.484Z,1528867301.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:21:41.485Z,1528867301.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:41.883Z,1528867301.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:21:41.884Z,1528867301.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:42.291Z,1528867302.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:21:42.292Z,1528867302.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:42.692Z,1528867302.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:21:42.693Z,1528867302.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:43.088Z,1528867303.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:21:43.089Z,1528867303.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:43.483Z,1528867303.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T05:21:43.484Z,1528867303.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:43.884Z,1528867303.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T05:21:43.884Z,1528867303.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:44.283Z,1528867304.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T05:21:44.284Z,1528867304.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:44.684Z,1528867304.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:21:44.685Z,1528867304.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:45.082Z,1528867305.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:21:45.083Z,1528867305.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:45.491Z,1528867305.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:21:45.492Z,1528867305.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:45.893Z,1528867305.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:21:45.894Z,1528867305.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:46.296Z,1528867306.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:21:46.297Z,1528867306.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:46.686Z,1528867306.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:21:46.687Z,1528867306.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:47.087Z,1528867307.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:21:47.088Z,1528867307.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:47.488Z,1528867307.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:21:47.489Z,1528867307.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:47.883Z,1528867307.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:21:47.884Z,1528867307.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:48.296Z,1528867308.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:21:48.297Z,1528867308.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:48.692Z,1528867308.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:21:48.693Z,1528867308.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:49.092Z,1528867309.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:21:49.092Z,1528867309.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:49.487Z,1528867309.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:21:49.488Z,1528867309.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:49.880Z,1528867309.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:21:49.881Z,1528867309.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:50.282Z,1528867310.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:21:50.283Z,1528867310.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:50.689Z,1528867310.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T05:21:50.690Z,1528867310.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:51.082Z,1528867311.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:51.492Z,1528867311.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:51.897Z,1528867311.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:52.296Z,1528867312.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:52.685Z,1528867312.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:53.087Z,1528867313.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:53.488Z,1528867313.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:53.884Z,1528867313.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:54.296Z,1528867314.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:54.700Z,1528867314.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:55.096Z,1528867315.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:55.489Z,1528867315.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:55.880Z,1528867315.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:56.282Z,1528867316.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:56.686Z,1528867316.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:57.082Z,1528867317.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:57.496Z,1528867317.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:57.897Z,1528867317.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:58.292Z,1528867318.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:58.688Z,1528867318.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:59.098Z,1528867319.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:59.490Z,1528867319.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:21:59.889Z,1528867319.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:00.299Z,1528867320.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:00.693Z,1528867320.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:01.092Z,1528867321.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:01.492Z,1528867321.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:01.890Z,1528867321.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:02.290Z,1528867322.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:02.691Z,1528867322.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:03.090Z,1528867323.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:03.493Z,1528867323.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:03.904Z,1528867323.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:04.291Z,1528867324.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:04.693Z,1528867324.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:05.097Z,1528867325.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:05.493Z,1528867325.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:05.893Z,1528867325.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:06.299Z,1528867326.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:06.697Z,1528867326.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:07.098Z,1528867327.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:07.497Z,1528867327.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:07.895Z,1528867327.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:08.293Z,1528867328.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:08.695Z,1528867328.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:09.078Z,1528867329.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:09.499Z,1528867329.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:09.901Z,1528867329.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:10.301Z,1528867330.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:10.680Z,1528867330.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:11.091Z,1528867331.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:11.482Z,1528867331.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:11.880Z,1528867331.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:12.308Z,1528867332.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:12.691Z,1528867332.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:13.118Z,1528867333.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:13.480Z,1528867333.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:13.883Z,1528867333.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:14.282Z,1528867334.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:14.686Z,1528867334.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:15.090Z,1528867335.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:15.487Z,1528867335.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:15.915Z,1528867335.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:16.312Z,1528867336.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:16.688Z,1528867336.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:17.083Z,1528867337.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:17.487Z,1528867337.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:17.887Z,1528867337.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:18.295Z,1528867338.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:18.697Z,1528867338.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:19.100Z,1528867339.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:19.103Z,1528867339.103 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T05:22:19.103Z,1528867339.103 [Default:CheckIn:C.Wait] Stopped
2018-06-13T05:22:19.103Z,1528867339.103 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T05:22:19.103Z,1528867339.103 [Default:CheckIn:D] Running Loop=1
2018-06-13T05:22:19.493Z,1528867339.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:19.496Z,1528867339.496 [Default:CheckIn:D] Stopped
2018-06-13T05:22:19.496Z,1528867339.496 [Default:CheckIn:E] Running Loop=1
2018-06-13T05:22:19.887Z,1528867339.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:19.890Z,1528867339.890 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 115.100854 min 
2018-06-13T05:22:19.890Z,1528867339.890 [Default:CheckIn:E] Stopped
2018-06-13T05:22:19.890Z,1528867339.890 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T05:22:19.891Z,1528867339.891 [Default:CheckIn] Stopped
2018-06-13T05:22:19.891Z,1528867339.891 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T05:22:19.891Z,1528867339.891 [Default:CheckIn](INFO): Running loop #12
2018-06-13T05:22:19.891Z,1528867339.891 [Default:CheckIn] Running Loop=12
2018-06-13T05:22:19.891Z,1528867339.891 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T05:22:19.891Z,1528867339.891 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T05:22:20.296Z,1528867340.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:20.693Z,1528867340.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:23.798Z,1528867343.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:23.943Z,1528867343.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:24.342Z,1528867344.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:24.746Z,1528867344.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:25.142Z,1528867345.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:25.543Z,1528867345.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:25.937Z,1528867345.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:26.346Z,1528867346.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:26.752Z,1528867346.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:27.142Z,1528867347.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:27.528Z,1528867347.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:27.924Z,1528867347.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:28.323Z,1528867348.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:28.728Z,1528867348.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:29.124Z,1528867349.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:29.551Z,1528867349.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:29.934Z,1528867349.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:30.335Z,1528867350.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:30.725Z,1528867350.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:31.125Z,1528867351.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:31.533Z,1528867351.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:31.923Z,1528867351.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:32.331Z,1528867352.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:32.735Z,1528867352.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:33.132Z,1528867353.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:33.526Z,1528867353.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:33.927Z,1528867353.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:34.326Z,1528867354.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:34.725Z,1528867354.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:35.126Z,1528867355.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:35.531Z,1528867355.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:35.930Z,1528867355.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:36.340Z,1528867356.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:36.726Z,1528867356.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:37.127Z,1528867357.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:37.528Z,1528867357.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:37.926Z,1528867357.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:38.336Z,1528867358.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:38.739Z,1528867358.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:39.131Z,1528867359.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:39.527Z,1528867359.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:39.927Z,1528867359.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:40.329Z,1528867360.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:40.728Z,1528867360.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:41.136Z,1528867361.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:41.540Z,1528867361.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:41.936Z,1528867361.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:42.336Z,1528867362.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:42.726Z,1528867362.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:43.132Z,1528867363.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:43.528Z,1528867363.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:43.926Z,1528867363.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:44.335Z,1528867364.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:44.736Z,1528867364.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:45.137Z,1528867365.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:45.526Z,1528867365.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:45.929Z,1528867365.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:46.326Z,1528867366.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:46.729Z,1528867366.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:47.110Z,1528867367.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:47.128Z,1528867367.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:47.518Z,1528867367.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:47.536Z,1528867367.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:47.919Z,1528867367.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:47.937Z,1528867367.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:48.319Z,1528867368.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:48.337Z,1528867368.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:48.709Z,1528867368.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:48.727Z,1528867368.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:49.109Z,1528867369.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:49.127Z,1528867369.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:49.504Z,1528867369.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:49.538Z,1528867369.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:49.908Z,1528867369.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:49.927Z,1528867369.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:50.317Z,1528867370.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:50.340Z,1528867370.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:50.719Z,1528867370.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:50.737Z,1528867370.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:51.119Z,1528867371.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:51.137Z,1528867371.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:51.514Z,1528867371.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:51.532Z,1528867371.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:51.911Z,1528867371.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:51.930Z,1528867371.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:52.315Z,1528867372.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:52.332Z,1528867372.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:52.710Z,1528867372.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:52.732Z,1528867372.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:53.113Z,1528867373.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:53.131Z,1528867373.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:53.518Z,1528867373.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:53.536Z,1528867373.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:53.918Z,1528867373.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:53.937Z,1528867373.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:54.318Z,1528867374.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:54.337Z,1528867374.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:54.712Z,1528867374.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:54.730Z,1528867374.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:55.112Z,1528867375.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:55.129Z,1528867375.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:55.511Z,1528867375.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:55.529Z,1528867375.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:55.909Z,1528867375.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:55.926Z,1528867375.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:56.321Z,1528867376.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:56.339Z,1528867376.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:56.718Z,1528867376.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:56.744Z,1528867376.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:57.118Z,1528867377.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:57.140Z,1528867377.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:57.509Z,1528867377.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:22:57.527Z,1528867377.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:57.934Z,1528867377.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:58.327Z,1528867378.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:58.732Z,1528867378.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:59.132Z,1528867379.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:59.544Z,1528867379.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:22:59.940Z,1528867379.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:00.341Z,1528867380.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:00.727Z,1528867380.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:01.133Z,1528867381.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:01.535Z,1528867381.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:01.926Z,1528867381.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:02.338Z,1528867382.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:02.748Z,1528867382.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:03.143Z,1528867383.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:03.532Z,1528867383.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:03.928Z,1528867383.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:04.337Z,1528867384.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:04.736Z,1528867384.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:05.128Z,1528867385.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:05.548Z,1528867385.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:05.952Z,1528867385.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:06.342Z,1528867386.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:06.732Z,1528867386.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:07.136Z,1528867387.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:07.538Z,1528867387.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:07.928Z,1528867387.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:08.345Z,1528867388.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:08.744Z,1528867388.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:09.138Z,1528867389.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:09.534Z,1528867389.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:09.930Z,1528867389.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:10.348Z,1528867390.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:10.743Z,1528867390.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:11.146Z,1528867391.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:11.536Z,1528867391.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:11.939Z,1528867391.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:12.349Z,1528867392.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:12.742Z,1528867392.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:13.140Z,1528867393.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:13.535Z,1528867393.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:13.937Z,1528867393.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:14.343Z,1528867394.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:14.748Z,1528867394.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:15.137Z,1528867395.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:15.540Z,1528867395.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:15.929Z,1528867395.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:16.338Z,1528867396.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:16.743Z,1528867396.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:17.146Z,1528867397.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:17.546Z,1528867397.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:17.939Z,1528867397.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:18.343Z,1528867398.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:18.760Z,1528867398.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:19.156Z,1528867399.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:19.536Z,1528867399.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:22.656Z,1528867402.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:22.837Z,1528867402.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:23.238Z,1528867403.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:23.641Z,1528867403.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:24.005Z,1528867404.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:24.408Z,1528867404.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:24.812Z,1528867404.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:25.212Z,1528867405.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:25.640Z,1528867405.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:26.035Z,1528867406.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:26.438Z,1528867406.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:26.811Z,1528867406.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:27.211Z,1528867407.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:27.616Z,1528867407.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:28.011Z,1528867408.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:28.439Z,1528867408.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:28.840Z,1528867408.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:29.244Z,1528867409.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:29.610Z,1528867409.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:30.016Z,1528867410.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:30.410Z,1528867410.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:30.812Z,1528867410.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:31.233Z,1528867411.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:31.621Z,1528867411.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:32.023Z,1528867412.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:32.419Z,1528867412.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:32.814Z,1528867412.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:33.214Z,1528867413.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:33.615Z,1528867413.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:34.014Z,1528867414.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:34.419Z,1528867414.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:34.822Z,1528867414.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:35.222Z,1528867415.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:35.611Z,1528867415.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:36.014Z,1528867416.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:36.410Z,1528867416.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:36.816Z,1528867416.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:37.217Z,1528867417.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:37.620Z,1528867417.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:38.022Z,1528867418.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:38.419Z,1528867418.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:38.814Z,1528867418.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:39.211Z,1528867419.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:39.615Z,1528867419.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:40.012Z,1528867420.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:40.417Z,1528867420.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:40.819Z,1528867420.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:41.223Z,1528867421.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:41.614Z,1528867421.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:42.011Z,1528867422.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:42.420Z,1528867422.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:42.815Z,1528867422.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:43.220Z,1528867423.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:43.619Z,1528867423.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:44.019Z,1528867424.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:44.420Z,1528867424.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:44.820Z,1528867424.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:45.211Z,1528867425.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:45.611Z,1528867425.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:46.020Z,1528867426.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:46.423Z,1528867426.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:46.822Z,1528867426.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:47.220Z,1528867427.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:47.612Z,1528867427.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:48.014Z,1528867428.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:48.416Z,1528867428.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:48.811Z,1528867428.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:49.223Z,1528867429.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:49.621Z,1528867429.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:50.021Z,1528867430.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:50.420Z,1528867430.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:50.824Z,1528867430.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:51.215Z,1528867431.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:51.615Z,1528867431.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:52.014Z,1528867432.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:52.424Z,1528867432.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:52.825Z,1528867432.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:53.225Z,1528867433.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:53.617Z,1528867433.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:54.023Z,1528867434.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:54.414Z,1528867434.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:54.820Z,1528867434.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:55.214Z,1528867435.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:55.630Z,1528867435.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:56.031Z,1528867436.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:56.420Z,1528867436.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:56.817Z,1528867436.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:57.215Z,1528867437.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:57.616Z,1528867437.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:58.018Z,1528867438.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:58.428Z,1528867438.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:58.835Z,1528867438.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:59.228Z,1528867439.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:23:59.622Z,1528867439.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:00.021Z,1528867440.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:00.420Z,1528867440.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:00.825Z,1528867440.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:01.226Z,1528867441.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:01.630Z,1528867441.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:02.027Z,1528867442.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:02.425Z,1528867442.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:02.827Z,1528867442.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:03.230Z,1528867443.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:03.629Z,1528867443.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:04.026Z,1528867444.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:04.432Z,1528867444.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:04.826Z,1528867444.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:05.233Z,1528867445.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:05.628Z,1528867445.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:06.028Z,1528867446.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:06.436Z,1528867446.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:06.827Z,1528867446.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:07.226Z,1528867447.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:07.626Z,1528867447.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:08.028Z,1528867448.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:08.436Z,1528867448.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:08.840Z,1528867448.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:09.239Z,1528867449.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:09.632Z,1528867449.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:10.034Z,1528867450.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:10.436Z,1528867450.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:10.837Z,1528867450.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:11.238Z,1528867451.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:11.633Z,1528867451.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:12.013Z,1528867452.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:12.439Z,1528867452.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:12.836Z,1528867452.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:13.244Z,1528867453.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:13.614Z,1528867453.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:14.011Z,1528867454.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:14.437Z,1528867454.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:14.844Z,1528867454.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:15.237Z,1528867455.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:15.616Z,1528867455.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:16.030Z,1528867456.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:16.443Z,1528867456.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:16.832Z,1528867456.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:17.245Z,1528867457.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:17.615Z,1528867457.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:18.040Z,1528867458.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:18.441Z,1528867458.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:18.821Z,1528867458.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:19.219Z,1528867459.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:19.642Z,1528867459.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:22.718Z,1528867462.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:22.899Z,1528867462.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:23.303Z,1528867463.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:23.701Z,1528867463.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:24.073Z,1528867464.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:24.498Z,1528867464.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:24.878Z,1528867464.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:25.304Z,1528867465.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:25.708Z,1528867465.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:26.115Z,1528867466.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:26.495Z,1528867466.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:26.884Z,1528867466.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:27.279Z,1528867467.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:27.688Z,1528867467.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:28.084Z,1528867468.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:28.492Z,1528867468.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:28.891Z,1528867468.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:29.291Z,1528867469.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:29.683Z,1528867469.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:30.083Z,1528867470.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:30.483Z,1528867470.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:30.894Z,1528867470.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:31.282Z,1528867471.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:31.691Z,1528867471.691 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:31.691Z,1528867471.691 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2018-06-13T05:24:31.691Z,1528867471.691 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:24:31.693Z,1528867471.693 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:31.693Z,1528867471.693 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40
2018-06-13T05:24:31.693Z,1528867471.693 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:24:31.695Z,1528867471.695 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:31.695Z,1528867471.695 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2018-06-13T05:24:31.695Z,1528867471.695 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:24:31.793Z,1528867471.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:24:31.793Z,1528867471.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:24:31.793Z,1528867471.793 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:24:32.181Z,1528867472.181 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:24:32.181Z,1528867472.181 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2018-06-13T05:24:32.182Z,1528867472.182 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:24:32.182Z,1528867472.182 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40
2018-06-13T05:24:32.182Z,1528867472.182 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:24:32.182Z,1528867472.182 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2018-06-13T05:24:32.484Z,1528867472.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:24:32.489Z,1528867472.489 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:24:32.489Z,1528867472.489 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:24:32.489Z,1528867472.489 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:24:32.490Z,1528867472.490 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:24:32.490Z,1528867472.490 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:24:32.491Z,1528867472.491 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:24:32.491Z,1528867472.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:24:32.491Z,1528867472.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:24:32.891Z,1528867472.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:24:32.892Z,1528867472.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:33.288Z,1528867473.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:24:33.289Z,1528867473.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:33.685Z,1528867473.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:24:33.686Z,1528867473.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:34.096Z,1528867474.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:24:34.101Z,1528867474.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:34.508Z,1528867474.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:24:34.509Z,1528867474.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:34.901Z,1528867474.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:24:34.902Z,1528867474.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:35.298Z,1528867475.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:24:35.299Z,1528867475.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:35.685Z,1528867475.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:24:35.686Z,1528867475.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:36.087Z,1528867476.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:24:36.088Z,1528867476.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:36.501Z,1528867476.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:24:36.502Z,1528867476.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:36.894Z,1528867476.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:24:36.895Z,1528867476.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:37.289Z,1528867477.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:24:37.290Z,1528867477.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:37.702Z,1528867477.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:24:37.703Z,1528867477.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:38.103Z,1528867478.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:24:38.104Z,1528867478.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:38.498Z,1528867478.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:24:38.499Z,1528867478.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:38.883Z,1528867478.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:24:38.884Z,1528867478.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:39.277Z,1528867479.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:24:39.278Z,1528867479.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:39.685Z,1528867479.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:24:39.686Z,1528867479.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:40.083Z,1528867480.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:24:40.084Z,1528867480.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:40.446Z,1528867480.446 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T05:24:40.446Z,1528867480.446 [NAL9602] Data Fault, FailCount= 1
2018-06-13T05:24:40.446Z,1528867480.446 [NAL9602](ERROR): Data Fault
2018-06-13T05:24:40.482Z,1528867480.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:24:40.483Z,1528867480.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:40.577Z,1528867480.577 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T05:24:40.842Z,1528867480.842 [NAL9602](INFO): Powering down
2018-06-13T05:24:40.904Z,1528867480.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:24:40.909Z,1528867480.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:41.286Z,1528867481.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:24:41.287Z,1528867481.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:41.685Z,1528867481.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:24:41.686Z,1528867481.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:41.761Z,1528867481.761 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T05:24:41.761Z,1528867481.761 [NAL9602] No Fault, FailCount= 1
2018-06-13T05:24:42.085Z,1528867482.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:24:42.086Z,1528867482.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:42.486Z,1528867482.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:24:42.487Z,1528867482.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:42.880Z,1528867482.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:24:42.882Z,1528867482.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:43.286Z,1528867483.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:24:43.287Z,1528867483.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:43.684Z,1528867483.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:24:43.685Z,1528867483.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:44.087Z,1528867484.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:24:44.088Z,1528867484.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:44.486Z,1528867484.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T05:24:44.486Z,1528867484.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:44.885Z,1528867484.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T05:24:44.886Z,1528867484.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:45.286Z,1528867485.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T05:24:45.287Z,1528867485.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:45.684Z,1528867485.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:24:45.685Z,1528867485.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:46.085Z,1528867486.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:24:46.086Z,1528867486.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:46.482Z,1528867486.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:24:46.483Z,1528867486.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:46.887Z,1528867486.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:24:46.888Z,1528867486.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:47.318Z,1528867487.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:24:47.319Z,1528867487.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:47.681Z,1528867487.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:24:47.682Z,1528867487.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:48.086Z,1528867488.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:24:48.087Z,1528867488.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:48.493Z,1528867488.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:24:48.494Z,1528867488.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:48.900Z,1528867488.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:24:48.917Z,1528867488.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:49.286Z,1528867489.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:24:49.287Z,1528867489.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:49.683Z,1528867489.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:24:49.684Z,1528867489.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:50.100Z,1528867490.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:24:50.100Z,1528867490.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:50.513Z,1528867490.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:24:50.514Z,1528867490.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:50.885Z,1528867490.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:24:50.886Z,1528867490.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:51.286Z,1528867491.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:24:51.287Z,1528867491.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:51.700Z,1528867491.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:52.116Z,1528867492.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:52.482Z,1528867492.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:52.884Z,1528867492.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:53.294Z,1528867493.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:53.682Z,1528867493.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:54.086Z,1528867494.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:54.488Z,1528867494.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:54.896Z,1528867494.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:55.288Z,1528867495.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:55.688Z,1528867495.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:56.087Z,1528867496.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:56.514Z,1528867496.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:56.897Z,1528867496.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:57.282Z,1528867497.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:57.695Z,1528867497.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:58.118Z,1528867498.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:58.483Z,1528867498.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:58.887Z,1528867498.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:59.288Z,1528867499.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:24:59.699Z,1528867499.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:00.087Z,1528867500.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:00.487Z,1528867500.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:00.883Z,1528867500.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:01.316Z,1528867501.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:01.687Z,1528867501.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:02.086Z,1528867502.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:02.485Z,1528867502.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:02.916Z,1528867502.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:03.286Z,1528867503.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:03.689Z,1528867503.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:04.087Z,1528867504.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:04.517Z,1528867504.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:04.883Z,1528867504.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:05.288Z,1528867505.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:05.688Z,1528867505.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:06.116Z,1528867506.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:06.486Z,1528867506.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:06.888Z,1528867506.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:07.288Z,1528867507.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:07.719Z,1528867507.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:08.082Z,1528867508.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:08.490Z,1528867508.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:08.887Z,1528867508.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:09.278Z,1528867509.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:09.687Z,1528867509.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:10.093Z,1528867510.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:10.488Z,1528867510.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:10.892Z,1528867510.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:11.242Z,1528867511.242 [NAL9602](INFO): Powering up NAL9602
2018-06-13T05:25:11.304Z,1528867511.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:11.672Z,1528867511.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:12.091Z,1528867512.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:12.476Z,1528867512.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:12.876Z,1528867512.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:13.282Z,1528867513.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:13.676Z,1528867513.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:14.080Z,1528867514.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:14.480Z,1528867514.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:14.877Z,1528867514.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:15.279Z,1528867515.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:15.680Z,1528867515.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:16.084Z,1528867516.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:16.477Z,1528867516.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:16.883Z,1528867516.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:17.277Z,1528867517.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:17.677Z,1528867517.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:18.082Z,1528867518.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:18.477Z,1528867518.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:18.878Z,1528867518.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:19.283Z,1528867519.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:19.681Z,1528867519.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:22.795Z,1528867522.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:22.964Z,1528867522.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:23.310Z,1528867523.310 [NAL9602](INFO): NAL9602 initialized
2018-06-13T05:25:23.344Z,1528867523.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:23.747Z,1528867523.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:24.173Z,1528867524.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:24.551Z,1528867524.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:24.955Z,1528867524.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:25.348Z,1528867525.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:25.758Z,1528867525.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:26.148Z,1528867526.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:26.552Z,1528867526.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:26.952Z,1528867526.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:27.354Z,1528867527.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:27.760Z,1528867527.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:28.144Z,1528867528.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:28.560Z,1528867528.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:28.984Z,1528867528.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:29.364Z,1528867529.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:29.756Z,1528867529.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:30.164Z,1528867530.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:30.560Z,1528867530.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:30.983Z,1528867530.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:31.356Z,1528867531.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:31.775Z,1528867531.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:32.180Z,1528867532.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:32.550Z,1528867532.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:32.954Z,1528867532.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:33.360Z,1528867533.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:33.762Z,1528867533.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:34.146Z,1528867534.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:34.546Z,1528867534.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:34.962Z,1528867534.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:35.360Z,1528867535.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:35.755Z,1528867535.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:36.154Z,1528867536.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:36.552Z,1528867536.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:36.958Z,1528867536.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:37.371Z,1528867537.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:37.758Z,1528867537.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:38.164Z,1528867538.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:38.550Z,1528867538.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:38.956Z,1528867538.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:39.359Z,1528867539.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:39.787Z,1528867539.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:40.153Z,1528867540.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:40.549Z,1528867540.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:40.960Z,1528867540.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:41.371Z,1528867541.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:41.758Z,1528867541.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:42.161Z,1528867542.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:42.552Z,1528867542.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:42.972Z,1528867542.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:43.362Z,1528867543.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:43.769Z,1528867543.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:44.150Z,1528867544.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:44.559Z,1528867544.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:44.962Z,1528867544.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:45.363Z,1528867545.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:45.760Z,1528867545.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:46.157Z,1528867546.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:46.556Z,1528867546.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:46.967Z,1528867546.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:47.360Z,1528867547.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:47.770Z,1528867547.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:48.146Z,1528867548.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:48.537Z,1528867548.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:48.966Z,1528867548.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:49.375Z,1528867549.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:49.764Z,1528867549.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:50.141Z,1528867550.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:50.545Z,1528867550.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:50.944Z,1528867550.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:51.368Z,1528867551.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:51.771Z,1528867551.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:52.147Z,1528867552.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:52.542Z,1528867552.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:52.951Z,1528867552.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:53.352Z,1528867553.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:53.753Z,1528867553.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:54.152Z,1528867554.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:54.551Z,1528867554.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:54.955Z,1528867554.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:55.356Z,1528867555.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:55.749Z,1528867555.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:56.146Z,1528867556.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:56.549Z,1528867556.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:56.955Z,1528867556.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:57.350Z,1528867557.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:57.757Z,1528867557.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:58.171Z,1528867558.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:58.541Z,1528867558.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:58.951Z,1528867558.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:59.347Z,1528867559.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:25:59.741Z,1528867559.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:00.163Z,1528867560.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:00.557Z,1528867560.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:00.950Z,1528867560.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:01.346Z,1528867561.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:01.741Z,1528867561.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:02.144Z,1528867562.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:02.546Z,1528867562.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:02.946Z,1528867562.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:03.349Z,1528867563.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:03.764Z,1528867563.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:04.160Z,1528867564.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:04.549Z,1528867564.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:04.956Z,1528867564.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:05.349Z,1528867565.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:05.753Z,1528867565.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:06.164Z,1528867566.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:06.568Z,1528867566.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:06.955Z,1528867566.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:07.337Z,1528867567.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:07.742Z,1528867567.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:08.140Z,1528867568.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:08.540Z,1528867568.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:08.939Z,1528867568.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:09.347Z,1528867569.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:09.751Z,1528867569.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:10.147Z,1528867570.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:10.538Z,1528867570.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:10.943Z,1528867570.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:11.342Z,1528867571.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:11.738Z,1528867571.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:12.151Z,1528867572.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:12.552Z,1528867572.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:12.947Z,1528867572.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:13.343Z,1528867573.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:13.743Z,1528867573.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:14.138Z,1528867574.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:14.555Z,1528867574.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:14.942Z,1528867574.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:15.348Z,1528867575.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:15.751Z,1528867575.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:16.156Z,1528867576.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:16.538Z,1528867576.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:16.943Z,1528867576.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:17.354Z,1528867577.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:17.749Z,1528867577.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:18.159Z,1528867578.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:18.557Z,1528867578.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:18.949Z,1528867578.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:19.350Z,1528867579.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:19.750Z,1528867579.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:20.154Z,1528867580.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:20.556Z,1528867580.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:20.949Z,1528867580.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:24.067Z,1528867584.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:24.223Z,1528867584.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:24.646Z,1528867584.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:25.002Z,1528867585.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:25.412Z,1528867585.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:25.771Z,1528867585.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:25.812Z,1528867585.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:26.193Z,1528867586.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:26.212Z,1528867586.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:26.592Z,1528867586.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:26.616Z,1528867586.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:26.982Z,1528867586.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:27.022Z,1528867587.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:27.367Z,1528867587.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:27.399Z,1528867587.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:27.771Z,1528867587.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:27.808Z,1528867587.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:28.172Z,1528867588.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:28.190Z,1528867588.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:28.571Z,1528867588.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:28.589Z,1528867588.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:28.985Z,1528867588.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:29.023Z,1528867589.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:29.385Z,1528867589.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:29.420Z,1528867589.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:29.785Z,1528867589.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:29.804Z,1528867589.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:30.177Z,1528867590.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:30.195Z,1528867590.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:30.576Z,1528867590.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:30.609Z,1528867590.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:30.974Z,1528867590.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:30.992Z,1528867590.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:31.382Z,1528867591.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:31.401Z,1528867591.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:31.789Z,1528867591.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:31.825Z,1528867591.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:32.187Z,1528867592.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:32.212Z,1528867592.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:32.576Z,1528867592.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:32.594Z,1528867592.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:32.982Z,1528867592.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:32.000Z,1528867593.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:33.375Z,1528867593.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:33.393Z,1528867593.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:33.775Z,1528867593.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:33.799Z,1528867593.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:34.186Z,1528867594.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:34.205Z,1528867594.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:34.587Z,1528867594.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:34.605Z,1528867594.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:34.986Z,1528867594.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:35.023Z,1528867595.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:35.371Z,1528867595.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:35.415Z,1528867595.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:35.767Z,1528867595.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:35.798Z,1528867595.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:36.171Z,1528867596.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:36.202Z,1528867596.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:36.572Z,1528867596.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:36.605Z,1528867596.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:36.974Z,1528867596.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:36.992Z,1528867596.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:37.382Z,1528867597.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:37.405Z,1528867597.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:37.785Z,1528867597.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:37.805Z,1528867597.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:38.186Z,1528867598.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:38.205Z,1528867598.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:38.575Z,1528867598.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:38.598Z,1528867598.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:38.975Z,1528867598.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:38.999Z,1528867598.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:39.375Z,1528867599.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:39.393Z,1528867599.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:39.775Z,1528867599.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:39.806Z,1528867599.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:40.187Z,1528867600.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:40.206Z,1528867600.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:40.589Z,1528867600.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:40.607Z,1528867600.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:40.987Z,1528867600.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:41.006Z,1528867601.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:41.371Z,1528867601.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:41.401Z,1528867601.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:41.768Z,1528867601.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:41.813Z,1528867601.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:42.172Z,1528867602.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:42.208Z,1528867602.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:42.572Z,1528867602.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:42.610Z,1528867602.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:42.972Z,1528867602.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:43.006Z,1528867603.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:43.386Z,1528867603.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:43.411Z,1528867603.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:43.790Z,1528867603.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:43.816Z,1528867603.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:44.189Z,1528867604.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:44.208Z,1528867604.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:44.571Z,1528867604.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:44.602Z,1528867604.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:44.971Z,1528867604.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:45.009Z,1528867605.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:45.368Z,1528867605.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:45.386Z,1528867605.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:45.771Z,1528867605.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:26:45.788Z,1528867605.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:46.222Z,1528867606.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:46.620Z,1528867606.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:47.019Z,1528867607.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:47.392Z,1528867607.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:47.791Z,1528867607.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:48.194Z,1528867608.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:48.598Z,1528867608.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:48.991Z,1528867608.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:49.405Z,1528867609.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:49.805Z,1528867609.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:50.205Z,1528867610.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:50.596Z,1528867610.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:50.996Z,1528867610.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:51.392Z,1528867611.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:51.796Z,1528867611.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:52.206Z,1528867612.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:52.604Z,1528867612.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:53.005Z,1528867613.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:53.394Z,1528867613.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:53.791Z,1528867613.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:54.206Z,1528867614.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:54.595Z,1528867614.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:54.993Z,1528867614.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:55.409Z,1528867615.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:55.809Z,1528867615.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:56.216Z,1528867616.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:56.596Z,1528867616.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:57.004Z,1528867617.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:57.393Z,1528867617.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:57.796Z,1528867617.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:58.206Z,1528867618.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:58.606Z,1528867618.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:59.009Z,1528867619.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:59.408Z,1528867619.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:26:59.793Z,1528867619.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:00.196Z,1528867620.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:00.598Z,1528867620.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:00.999Z,1528867620.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:01.406Z,1528867621.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:01.810Z,1528867621.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:02.205Z,1528867622.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:02.596Z,1528867622.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:03.002Z,1528867623.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:03.393Z,1528867623.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:03.798Z,1528867623.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:04.206Z,1528867624.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:04.606Z,1528867624.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:05.005Z,1528867625.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:05.404Z,1528867625.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:05.804Z,1528867625.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:06.196Z,1528867626.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:06.599Z,1528867626.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:06.993Z,1528867626.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:07.405Z,1528867627.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:07.810Z,1528867627.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:08.206Z,1528867628.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:08.605Z,1528867628.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:09.001Z,1528867629.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:09.403Z,1528867629.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:09.796Z,1528867629.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:10.206Z,1528867630.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:10.607Z,1528867630.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:11.005Z,1528867631.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:11.402Z,1528867631.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:11.801Z,1528867631.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:12.207Z,1528867632.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:12.605Z,1528867632.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:12.998Z,1528867632.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:13.416Z,1528867633.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:13.814Z,1528867633.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:14.211Z,1528867634.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:14.611Z,1528867634.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:15.005Z,1528867635.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:15.406Z,1528867635.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:15.792Z,1528867635.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:16.221Z,1528867636.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:16.618Z,1528867636.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:17.019Z,1528867637.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:17.425Z,1528867637.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:17.787Z,1528867637.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:18.193Z,1528867638.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:18.596Z,1528867638.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:18.990Z,1528867638.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:19.420Z,1528867639.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:19.823Z,1528867639.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:22.920Z,1528867642.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:22.924Z,1528867642.924 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T05:22:19.9Z
2018-06-13T05:27:22.924Z,1528867642.924 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T05:27:22.925Z,1528867642.925 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T05:27:23.089Z,1528867643.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:24.232Z,1528867644.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:24.387Z,1528867644.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:24.789Z,1528867644.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:25.193Z,1528867645.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:25.589Z,1528867645.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:25.981Z,1528867645.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:26.392Z,1528867646.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:29.526Z,1528867649.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:29.623Z,1528867649.623 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0048.lzma
2018-06-13T05:27:29.686Z,1528867649.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:30.076Z,1528867650.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:30.418Z,1528867650.418 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0048.lzma.bak
2018-06-13T05:27:30.418Z,1528867650.418 [DataOverHttps](INFO): SBD MOMSN=8328650
2018-06-13T05:27:30.487Z,1528867650.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:32.374Z,1528867652.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:32.391Z,1528867652.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:32.499Z,1528867652.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:32.540Z,1528867652.540 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:32.540Z,1528867652.540 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2018-06-13T05:27:32.540Z,1528867652.540 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:27:32.542Z,1528867652.542 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:32.542Z,1528867652.542 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41
2018-06-13T05:27:32.542Z,1528867652.542 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:27:32.544Z,1528867652.544 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:32.544Z,1528867652.544 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2018-06-13T05:27:32.544Z,1528867652.544 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:27:32.625Z,1528867652.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:27:32.625Z,1528867652.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:27:32.626Z,1528867652.626 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:27:32.922Z,1528867652.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:33.022Z,1528867653.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:27:33.022Z,1528867653.022 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2018-06-13T05:27:33.022Z,1528867653.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:27:33.022Z,1528867653.022 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41
2018-06-13T05:27:33.023Z,1528867653.023 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:27:33.023Z,1528867653.023 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2018-06-13T05:27:33.322Z,1528867653.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:33.345Z,1528867653.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:27:33.346Z,1528867653.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:27:33.346Z,1528867653.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:27:33.346Z,1528867653.346 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:27:33.347Z,1528867653.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:27:33.347Z,1528867653.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:27:33.347Z,1528867653.347 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:27:33.348Z,1528867653.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:27:33.348Z,1528867653.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:27:33.713Z,1528867653.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:33.747Z,1528867653.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:27:33.748Z,1528867653.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:36.860Z,1528867656.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:36.878Z,1528867656.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-06-13T05:27:36.879Z,1528867656.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:37.011Z,1528867657.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:37.060Z,1528867657.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T05:27:37.061Z,1528867657.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:37.422Z,1528867657.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:37.454Z,1528867657.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T05:27:37.455Z,1528867657.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:37.825Z,1528867657.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:37.852Z,1528867657.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T05:27:37.853Z,1528867657.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:38.218Z,1528867658.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:38.253Z,1528867658.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T05:27:38.254Z,1528867658.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:38.612Z,1528867658.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:38.645Z,1528867658.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T05:27:38.646Z,1528867658.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:41.865Z,1528867661.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:41.883Z,1528867661.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T05:27:41.883Z,1528867661.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:42.004Z,1528867662.004 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0049.lzma
2018-06-13T05:27:42.027Z,1528867662.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:42.096Z,1528867662.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:27:42.102Z,1528867662.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:42.433Z,1528867662.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:27:42.467Z,1528867662.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T05:27:42.468Z,1528867662.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:42.802Z,1528867662.802 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0049.lzma.bak
2018-06-13T05:27:42.802Z,1528867662.802 [DataOverHttps](INFO): SBD MOMSN=8328652
2018-06-13T05:27:42.884Z,1528867662.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T05:27:42.885Z,1528867662.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:44.738Z,1528867664.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T05:27:44.740Z,1528867664.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:44.769Z,1528867664.769 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T05:27:44.770Z,1528867664.770 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T05:27:44.770Z,1528867664.770 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T05:27:44.917Z,1528867664.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:27:44.918Z,1528867664.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:48.029Z,1528867668.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T05:27:48.030Z,1528867668.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:48.161Z,1528867668.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:27:48.162Z,1528867668.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:48.578Z,1528867668.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:27:48.579Z,1528867668.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:48.987Z,1528867668.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:27:48.988Z,1528867668.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:49.383Z,1528867669.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:27:49.384Z,1528867669.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:49.760Z,1528867669.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:27:49.761Z,1528867669.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:50.154Z,1528867670.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:27:50.155Z,1528867670.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:50.556Z,1528867670.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:27:50.557Z,1528867670.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:50.956Z,1528867670.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:27:50.957Z,1528867670.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:51.385Z,1528867671.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:27:51.386Z,1528867671.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:51.783Z,1528867671.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:27:51.784Z,1528867671.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:52.191Z,1528867672.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T05:27:52.192Z,1528867672.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:52.558Z,1528867672.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:52.958Z,1528867672.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:53.361Z,1528867673.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:53.764Z,1528867673.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:54.163Z,1528867674.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:54.563Z,1528867674.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:54.968Z,1528867674.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:55.362Z,1528867675.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:55.760Z,1528867675.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:56.168Z,1528867676.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:56.568Z,1528867676.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:56.968Z,1528867676.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:57.360Z,1528867677.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:57.756Z,1528867677.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:58.172Z,1528867678.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:58.567Z,1528867678.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:58.964Z,1528867678.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:59.359Z,1528867679.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:27:59.759Z,1528867679.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:00.163Z,1528867680.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:00.567Z,1528867680.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:00.972Z,1528867680.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:01.355Z,1528867681.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:01.760Z,1528867681.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:02.164Z,1528867682.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:02.562Z,1528867682.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:02.963Z,1528867682.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:03.360Z,1528867683.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:03.756Z,1528867683.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:04.164Z,1528867684.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:04.566Z,1528867684.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:04.963Z,1528867684.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:05.359Z,1528867685.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:05.758Z,1528867685.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:06.168Z,1528867686.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:06.572Z,1528867686.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:06.967Z,1528867686.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:07.357Z,1528867687.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:07.759Z,1528867687.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:08.170Z,1528867688.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:08.568Z,1528867688.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:08.967Z,1528867688.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:09.360Z,1528867689.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:09.756Z,1528867689.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:10.167Z,1528867690.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:10.567Z,1528867690.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:10.968Z,1528867690.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:11.360Z,1528867691.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:11.760Z,1528867691.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:12.168Z,1528867692.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:12.572Z,1528867692.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:12.972Z,1528867692.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:13.360Z,1528867693.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:13.760Z,1528867693.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:14.168Z,1528867694.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:14.572Z,1528867694.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:14.967Z,1528867694.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:15.358Z,1528867695.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:15.758Z,1528867695.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:16.168Z,1528867696.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:16.567Z,1528867696.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:16.968Z,1528867696.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:17.359Z,1528867697.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:17.759Z,1528867697.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:18.168Z,1528867698.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:18.572Z,1528867698.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:18.972Z,1528867698.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:19.372Z,1528867699.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:19.760Z,1528867699.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:20.158Z,1528867700.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:20.559Z,1528867700.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:20.968Z,1528867700.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:21.386Z,1528867701.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:21.773Z,1528867701.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:22.168Z,1528867702.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:22.562Z,1528867702.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:22.961Z,1528867702.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:23.360Z,1528867703.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:23.766Z,1528867703.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:24.160Z,1528867704.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:24.569Z,1528867704.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:24.974Z,1528867704.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:25.369Z,1528867705.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:25.762Z,1528867705.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:26.162Z,1528867706.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:26.654Z,1528867706.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:27.036Z,1528867707.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:27.425Z,1528867707.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:27.875Z,1528867707.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:28.177Z,1528867708.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:28.563Z,1528867708.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:28.961Z,1528867708.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:29.427Z,1528867709.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:29.764Z,1528867709.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:30.161Z,1528867710.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:30.574Z,1528867710.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:30.973Z,1528867710.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:31.380Z,1528867711.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:31.760Z,1528867711.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:32.164Z,1528867712.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:32.563Z,1528867712.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:32.960Z,1528867712.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:33.380Z,1528867713.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:33.769Z,1528867713.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:34.169Z,1528867714.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:34.564Z,1528867714.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:34.966Z,1528867714.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:35.372Z,1528867715.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:35.763Z,1528867715.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:36.161Z,1528867716.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:36.568Z,1528867716.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:36.980Z,1528867716.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:37.369Z,1528867717.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:37.760Z,1528867717.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:38.167Z,1528867718.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:38.561Z,1528867718.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:38.960Z,1528867718.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:39.375Z,1528867719.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:39.768Z,1528867719.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:40.172Z,1528867720.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:40.571Z,1528867720.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:40.965Z,1528867720.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:41.360Z,1528867721.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:41.763Z,1528867721.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:42.161Z,1528867722.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:42.565Z,1528867722.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:42.973Z,1528867722.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:43.367Z,1528867723.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:43.760Z,1528867723.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:44.163Z,1528867724.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:44.560Z,1528867724.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:44.961Z,1528867724.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:45.380Z,1528867725.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:45.776Z,1528867725.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:46.176Z,1528867726.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:46.566Z,1528867726.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:49.673Z,1528867729.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:49.819Z,1528867729.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:50.220Z,1528867730.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:50.618Z,1528867730.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:51.020Z,1528867731.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:51.417Z,1528867731.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:51.813Z,1528867731.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:52.216Z,1528867732.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:52.628Z,1528867732.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:53.021Z,1528867733.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:53.422Z,1528867733.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:53.796Z,1528867733.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:54.196Z,1528867734.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:54.621Z,1528867734.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:55.000Z,1528867735.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:55.424Z,1528867735.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:55.829Z,1528867735.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:56.230Z,1528867736.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:56.600Z,1528867736.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:56.000Z,1528867737.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:57.400Z,1528867737.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:57.804Z,1528867737.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:58.200Z,1528867738.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:58.631Z,1528867738.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:59.028Z,1528867739.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:59.428Z,1528867739.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:28:59.801Z,1528867739.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:00.200Z,1528867740.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:00.604Z,1528867740.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:01.000Z,1528867741.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:01.428Z,1528867741.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:01.830Z,1528867741.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:02.230Z,1528867742.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:02.604Z,1528867742.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:02.000Z,1528867743.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:03.404Z,1528867743.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:03.799Z,1528867743.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:04.200Z,1528867744.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:04.634Z,1528867744.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:05.032Z,1528867745.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:05.408Z,1528867745.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:05.803Z,1528867745.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:06.202Z,1528867746.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:06.603Z,1528867746.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:07.004Z,1528867747.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:07.408Z,1528867747.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:07.816Z,1528867747.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:08.234Z,1528867748.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:08.605Z,1528867748.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:09.003Z,1528867749.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:09.416Z,1528867749.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:09.802Z,1528867749.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:10.203Z,1528867750.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:10.616Z,1528867750.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:11.015Z,1528867751.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:11.420Z,1528867751.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:11.805Z,1528867751.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:12.202Z,1528867752.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:12.605Z,1528867752.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:13.008Z,1528867753.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:13.422Z,1528867753.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:13.820Z,1528867753.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:14.219Z,1528867754.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:14.602Z,1528867754.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:15.005Z,1528867755.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:15.405Z,1528867755.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:15.815Z,1528867755.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:16.207Z,1528867756.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:16.618Z,1528867756.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:17.015Z,1528867757.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:17.414Z,1528867757.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:17.809Z,1528867757.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:18.204Z,1528867758.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:18.604Z,1528867758.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:19.009Z,1528867759.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:19.420Z,1528867759.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:19.816Z,1528867759.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:20.224Z,1528867760.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:20.603Z,1528867760.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:21.008Z,1528867761.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:21.408Z,1528867761.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:21.810Z,1528867761.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:22.204Z,1528867762.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:22.618Z,1528867762.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:23.020Z,1528867763.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:23.413Z,1528867763.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:23.810Z,1528867763.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:24.211Z,1528867764.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:24.611Z,1528867764.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:25.014Z,1528867765.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:25.414Z,1528867765.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:25.817Z,1528867765.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:26.202Z,1528867766.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:26.220Z,1528867766.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:26.575Z,1528867766.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:26.608Z,1528867766.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:26.979Z,1528867766.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:27.012Z,1528867767.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:27.379Z,1528867767.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:27.409Z,1528867767.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:27.776Z,1528867767.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:27.794Z,1528867767.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:28.179Z,1528867768.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:28.196Z,1528867768.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:28.598Z,1528867768.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:28.627Z,1528867768.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:28.998Z,1528867768.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:29.025Z,1528867769.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:29.393Z,1528867769.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:29.427Z,1528867769.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:29.802Z,1528867769.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:30.195Z,1528867770.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:30.605Z,1528867770.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:31.000Z,1528867771.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:31.428Z,1528867771.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:31.829Z,1528867771.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:32.231Z,1528867772.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:32.604Z,1528867772.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:32.000Z,1528867773.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:33.382Z,1528867773.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:33.404Z,1528867773.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:33.781Z,1528867773.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:33.804Z,1528867773.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:34.182Z,1528867774.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:34.200Z,1528867774.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:34.594Z,1528867774.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:34.640Z,1528867774.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:34.993Z,1528867774.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:35.016Z,1528867775.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:35.390Z,1528867775.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:35.408Z,1528867775.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:35.785Z,1528867775.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:35.803Z,1528867775.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:36.179Z,1528867776.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:36.202Z,1528867776.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:36.584Z,1528867776.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:36.603Z,1528867776.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:37.003Z,1528867777.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:37.407Z,1528867777.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:37.816Z,1528867777.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:38.194Z,1528867778.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:38.240Z,1528867778.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:38.581Z,1528867778.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:38.600Z,1528867778.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:38.984Z,1528867778.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:39.002Z,1528867779.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:39.386Z,1528867779.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:39.405Z,1528867779.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:39.782Z,1528867779.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:39.800Z,1528867779.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:40.184Z,1528867780.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:40.203Z,1528867780.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:40.593Z,1528867780.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:40.616Z,1528867780.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:40.990Z,1528867780.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:41.012Z,1528867781.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:41.394Z,1528867781.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:41.413Z,1528867781.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:41.786Z,1528867781.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:41.804Z,1528867781.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:42.179Z,1528867782.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:42.203Z,1528867782.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:42.585Z,1528867782.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:42.604Z,1528867782.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:42.983Z,1528867782.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:43.016Z,1528867783.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:43.390Z,1528867783.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:43.408Z,1528867783.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:43.793Z,1528867783.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:43.816Z,1528867783.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:44.212Z,1528867784.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:44.603Z,1528867784.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:45.006Z,1528867785.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:45.407Z,1528867785.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:48.516Z,1528867788.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:48.672Z,1528867788.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:49.094Z,1528867789.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:49.471Z,1528867789.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:49.867Z,1528867789.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:50.246Z,1528867790.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:50.264Z,1528867790.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:50.642Z,1528867790.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:50.660Z,1528867790.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:51.045Z,1528867791.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:51.063Z,1528867791.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:51.471Z,1528867791.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:51.867Z,1528867791.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:52.268Z,1528867792.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:52.663Z,1528867792.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:53.061Z,1528867793.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:53.463Z,1528867793.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:53.874Z,1528867793.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:54.264Z,1528867794.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:54.668Z,1528867794.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:55.071Z,1528867795.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:55.467Z,1528867795.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:55.867Z,1528867795.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:56.265Z,1528867796.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:56.661Z,1528867796.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:57.074Z,1528867797.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:57.471Z,1528867797.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:57.868Z,1528867797.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:58.269Z,1528867798.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:58.670Z,1528867798.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:59.071Z,1528867799.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:59.476Z,1528867799.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:29:59.840Z,1528867799.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:29:59.879Z,1528867799.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:00.239Z,1528867800.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:30:00.267Z,1528867800.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:00.657Z,1528867800.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:30:00.675Z,1528867800.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:01.080Z,1528867801.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:01.474Z,1528867801.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:01.875Z,1528867801.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:02.273Z,1528867802.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:02.674Z,1528867802.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:03.072Z,1528867803.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:03.483Z,1528867803.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:03.877Z,1528867803.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:04.277Z,1528867804.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:04.673Z,1528867804.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:05.077Z,1528867805.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:05.461Z,1528867805.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:05.861Z,1528867805.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:06.256Z,1528867806.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:06.690Z,1528867806.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:07.070Z,1528867807.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:07.467Z,1528867807.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:07.862Z,1528867807.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:08.262Z,1528867808.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:08.660Z,1528867808.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:09.062Z,1528867809.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:09.467Z,1528867809.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:09.867Z,1528867809.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:10.267Z,1528867810.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:10.663Z,1528867810.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:11.060Z,1528867811.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:11.462Z,1528867811.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:11.860Z,1528867811.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:12.260Z,1528867812.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:12.667Z,1528867812.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:13.070Z,1528867813.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:13.465Z,1528867813.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:13.862Z,1528867813.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:14.262Z,1528867814.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:14.659Z,1528867814.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:15.068Z,1528867815.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:15.471Z,1528867815.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:15.867Z,1528867815.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:16.267Z,1528867816.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:16.664Z,1528867816.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:17.062Z,1528867817.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:17.462Z,1528867817.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:17.863Z,1528867817.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:18.264Z,1528867818.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:18.667Z,1528867818.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:19.066Z,1528867819.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:19.467Z,1528867819.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:19.863Z,1528867819.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:20.263Z,1528867820.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:20.659Z,1528867820.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:21.062Z,1528867821.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:21.467Z,1528867821.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:21.871Z,1528867821.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:22.268Z,1528867822.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:22.662Z,1528867822.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:23.066Z,1528867823.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:23.473Z,1528867823.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:23.864Z,1528867823.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:24.263Z,1528867824.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:24.672Z,1528867824.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:25.071Z,1528867825.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:25.471Z,1528867825.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:25.864Z,1528867825.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:26.264Z,1528867826.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:26.663Z,1528867826.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:27.064Z,1528867827.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:27.471Z,1528867827.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:27.875Z,1528867827.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:28.272Z,1528867828.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:28.663Z,1528867828.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:29.063Z,1528867829.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:29.464Z,1528867829.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:29.865Z,1528867829.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:30.263Z,1528867830.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:30.672Z,1528867830.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:31.071Z,1528867831.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:31.472Z,1528867831.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:31.862Z,1528867831.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:32.262Z,1528867832.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:32.665Z,1528867832.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:33.086Z,1528867833.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:33.498Z,1528867833.498 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:33.498Z,1528867833.498 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2018-06-13T05:30:33.498Z,1528867833.498 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:30:33.500Z,1528867833.500 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:33.500Z,1528867833.500 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42
2018-06-13T05:30:33.500Z,1528867833.500 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:30:33.502Z,1528867833.502 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:33.502Z,1528867833.502 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2018-06-13T05:30:33.502Z,1528867833.502 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:30:33.593Z,1528867833.593 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:30:33.593Z,1528867833.593 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:30:33.593Z,1528867833.593 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:30:33.945Z,1528867833.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:30:33.945Z,1528867833.945 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2018-06-13T05:30:33.946Z,1528867833.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:30:33.946Z,1528867833.946 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42
2018-06-13T05:30:33.946Z,1528867833.946 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:30:33.946Z,1528867833.946 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2018-06-13T05:30:34.283Z,1528867834.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:30:34.283Z,1528867834.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:30:34.284Z,1528867834.284 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:30:34.284Z,1528867834.284 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:30:34.289Z,1528867834.289 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:30:34.289Z,1528867834.289 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:30:34.289Z,1528867834.289 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:30:34.290Z,1528867834.290 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:30:34.290Z,1528867834.290 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:30:34.677Z,1528867834.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:30:34.678Z,1528867834.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:35.072Z,1528867835.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:30:35.072Z,1528867835.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:35.476Z,1528867835.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:30:35.476Z,1528867835.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:35.867Z,1528867835.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:30:35.868Z,1528867835.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:36.269Z,1528867836.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:30:36.270Z,1528867836.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:36.674Z,1528867836.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:30:36.675Z,1528867836.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:37.080Z,1528867837.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:30:37.081Z,1528867837.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:37.478Z,1528867837.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:30:37.478Z,1528867837.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:37.876Z,1528867837.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:30:37.876Z,1528867837.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:38.271Z,1528867838.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:30:38.272Z,1528867838.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:38.665Z,1528867838.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:30:38.666Z,1528867838.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:39.065Z,1528867839.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:30:39.066Z,1528867839.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:39.483Z,1528867839.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:30:39.483Z,1528867839.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:39.873Z,1528867839.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:30:39.874Z,1528867839.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:40.278Z,1528867840.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:30:40.279Z,1528867840.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:40.668Z,1528867840.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:30:40.669Z,1528867840.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:41.072Z,1528867841.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:30:41.073Z,1528867841.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:41.467Z,1528867841.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:30:41.468Z,1528867841.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:41.867Z,1528867841.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:30:41.868Z,1528867841.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:42.272Z,1528867842.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:30:42.273Z,1528867842.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:42.678Z,1528867842.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:30:42.679Z,1528867842.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:43.087Z,1528867843.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:30:43.088Z,1528867843.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:43.472Z,1528867843.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:30:43.473Z,1528867843.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:43.864Z,1528867843.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:30:43.865Z,1528867843.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:44.271Z,1528867844.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:30:44.272Z,1528867844.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:44.668Z,1528867844.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:30:44.670Z,1528867844.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:45.067Z,1528867845.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:30:45.068Z,1528867845.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:45.482Z,1528867845.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:30:45.482Z,1528867845.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:48.620Z,1528867848.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-06-13T05:30:48.621Z,1528867848.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:48.776Z,1528867848.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T05:30:48.777Z,1528867848.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:49.162Z,1528867849.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T05:30:49.163Z,1528867849.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:49.548Z,1528867849.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T05:30:49.566Z,1528867849.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:49.950Z,1528867849.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T05:30:49.950Z,1528867849.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:50.383Z,1528867850.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T05:30:50.384Z,1528867850.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:50.775Z,1528867850.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T05:30:50.776Z,1528867850.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:51.179Z,1528867851.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T05:30:51.180Z,1528867851.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:51.586Z,1528867851.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T05:30:51.587Z,1528867851.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:51.950Z,1528867851.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T05:30:51.951Z,1528867851.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:52.352Z,1528867852.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T05:30:52.353Z,1528867852.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:52.760Z,1528867852.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T05:30:52.761Z,1528867852.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:53.149Z,1528867853.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T05:30:53.150Z,1528867853.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:53.564Z,1528867853.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:53.990Z,1528867853.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:54.359Z,1528867854.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:54.760Z,1528867854.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:55.162Z,1528867855.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:55.552Z,1528867855.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:55.956Z,1528867855.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:56.356Z,1528867856.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:56.760Z,1528867856.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:57.163Z,1528867857.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:57.563Z,1528867857.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:57.951Z,1528867857.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:58.360Z,1528867858.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:58.766Z,1528867858.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:59.160Z,1528867859.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:59.564Z,1528867859.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:30:59.971Z,1528867859.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:00.365Z,1528867860.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:00.754Z,1528867860.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:01.162Z,1528867861.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:01.554Z,1528867861.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:01.965Z,1528867861.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:02.368Z,1528867862.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:02.768Z,1528867862.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:03.172Z,1528867863.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:03.569Z,1528867863.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:03.955Z,1528867863.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:04.364Z,1528867864.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:04.759Z,1528867864.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:05.153Z,1528867865.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:05.565Z,1528867865.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:05.974Z,1528867865.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:06.364Z,1528867866.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:06.756Z,1528867866.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:07.160Z,1528867867.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:07.560Z,1528867867.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:07.958Z,1528867867.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:08.368Z,1528867868.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:08.761Z,1528867868.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:09.168Z,1528867869.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:09.569Z,1528867869.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:09.964Z,1528867869.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:10.360Z,1528867870.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:10.764Z,1528867870.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:11.152Z,1528867871.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:11.565Z,1528867871.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:11.969Z,1528867871.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:12.365Z,1528867872.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:12.764Z,1528867872.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:13.160Z,1528867873.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:13.552Z,1528867873.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:13.957Z,1528867873.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:14.359Z,1528867874.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:14.768Z,1528867874.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:15.168Z,1528867875.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:15.576Z,1528867875.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:15.952Z,1528867875.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:16.362Z,1528867876.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:16.765Z,1528867876.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:17.160Z,1528867877.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:17.569Z,1528867877.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:17.970Z,1528867877.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:18.361Z,1528867878.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:18.760Z,1528867878.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:19.169Z,1528867879.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:19.564Z,1528867879.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:19.957Z,1528867879.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:20.359Z,1528867880.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:20.764Z,1528867880.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:21.169Z,1528867881.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:21.570Z,1528867881.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:21.956Z,1528867881.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:22.357Z,1528867882.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:22.760Z,1528867882.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:23.158Z,1528867883.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:23.569Z,1528867883.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:23.970Z,1528867883.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:24.367Z,1528867884.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:24.757Z,1528867884.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:25.160Z,1528867885.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:25.558Z,1528867885.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:25.958Z,1528867885.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:26.366Z,1528867886.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:26.768Z,1528867886.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:27.174Z,1528867887.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:27.571Z,1528867887.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:27.960Z,1528867887.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:28.358Z,1528867888.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:28.768Z,1528867888.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:29.162Z,1528867889.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:29.566Z,1528867889.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:29.971Z,1528867889.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:30.363Z,1528867890.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:30.757Z,1528867890.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:31.161Z,1528867891.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:31.557Z,1528867891.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:31.958Z,1528867891.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:32.359Z,1528867892.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:32.766Z,1528867892.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:33.171Z,1528867893.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:33.570Z,1528867893.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:33.957Z,1528867893.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:34.356Z,1528867894.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:34.764Z,1528867894.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:35.158Z,1528867895.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:35.569Z,1528867895.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:35.976Z,1528867895.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:36.365Z,1528867896.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:36.760Z,1528867896.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:37.163Z,1528867897.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:37.562Z,1528867897.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:37.967Z,1528867897.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:38.368Z,1528867898.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:38.780Z,1528867898.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:39.168Z,1528867899.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:39.570Z,1528867899.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:39.960Z,1528867899.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:40.366Z,1528867900.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:40.770Z,1528867900.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:41.172Z,1528867901.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:41.567Z,1528867901.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:41.975Z,1528867901.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:42.367Z,1528867902.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:42.772Z,1528867902.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:43.149Z,1528867903.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:43.554Z,1528867903.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:43.956Z,1528867903.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:44.352Z,1528867904.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:44.759Z,1528867904.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:45.176Z,1528867905.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:45.588Z,1528867905.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:48.660Z,1528867908.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:48.836Z,1528867908.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:49.238Z,1528867909.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:49.637Z,1528867909.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:50.034Z,1528867910.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:50.425Z,1528867910.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:50.813Z,1528867910.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:51.236Z,1528867911.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:51.642Z,1528867911.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:52.038Z,1528867912.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:52.441Z,1528867912.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:52.817Z,1528867912.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:53.216Z,1528867913.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:53.621Z,1528867913.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:54.024Z,1528867914.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:54.416Z,1528867914.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:54.847Z,1528867914.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:55.231Z,1528867915.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:55.628Z,1528867915.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:56.021Z,1528867916.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:56.428Z,1528867916.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:56.822Z,1528867916.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:57.222Z,1528867917.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:57.631Z,1528867917.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:58.031Z,1528867918.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:58.428Z,1528867918.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:58.828Z,1528867918.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:59.220Z,1528867919.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:31:59.621Z,1528867919.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:00.031Z,1528867920.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:00.420Z,1528867920.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:00.827Z,1528867920.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:01.231Z,1528867921.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:01.628Z,1528867921.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:02.028Z,1528867922.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:02.422Z,1528867922.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:02.822Z,1528867922.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:03.224Z,1528867923.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:03.631Z,1528867923.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:04.027Z,1528867924.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:04.427Z,1528867924.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:04.823Z,1528867924.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:05.222Z,1528867925.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:05.621Z,1528867925.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:06.034Z,1528867926.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:06.422Z,1528867926.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:06.827Z,1528867926.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:07.232Z,1528867927.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:07.632Z,1528867927.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:08.024Z,1528867928.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:08.423Z,1528867928.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:08.821Z,1528867928.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:09.224Z,1528867929.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:09.635Z,1528867929.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:10.032Z,1528867930.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:10.429Z,1528867930.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:10.828Z,1528867930.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:11.228Z,1528867931.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:11.628Z,1528867931.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:12.034Z,1528867932.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:12.436Z,1528867932.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:12.839Z,1528867932.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:13.239Z,1528867933.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:13.632Z,1528867933.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:14.026Z,1528867934.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:14.428Z,1528867934.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:14.836Z,1528867934.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:15.232Z,1528867935.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:15.639Z,1528867935.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:16.036Z,1528867936.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:16.434Z,1528867936.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:16.827Z,1528867936.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:17.224Z,1528867937.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:17.637Z,1528867937.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:18.027Z,1528867938.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:18.424Z,1528867938.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:18.835Z,1528867938.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:19.237Z,1528867939.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:19.632Z,1528867939.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:20.029Z,1528867940.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:20.430Z,1528867940.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:20.829Z,1528867940.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:21.229Z,1528867941.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:21.635Z,1528867941.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:22.035Z,1528867942.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:22.441Z,1528867942.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:22.832Z,1528867942.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:23.228Z,1528867943.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:23.634Z,1528867943.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:24.036Z,1528867944.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:24.429Z,1528867944.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:24.835Z,1528867944.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:25.242Z,1528867945.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:25.634Z,1528867945.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:26.036Z,1528867946.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:26.417Z,1528867946.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:26.842Z,1528867946.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:27.243Z,1528867947.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:27.644Z,1528867947.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:28.038Z,1528867948.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:28.442Z,1528867948.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:28.844Z,1528867948.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:29.219Z,1528867949.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:29.631Z,1528867949.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:30.039Z,1528867950.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:30.422Z,1528867950.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:30.848Z,1528867950.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:31.253Z,1528867951.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:31.648Z,1528867951.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:32.022Z,1528867952.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:32.420Z,1528867952.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:32.824Z,1528867952.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:33.222Z,1528867953.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:33.650Z,1528867953.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:34.045Z,1528867954.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:34.447Z,1528867954.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:34.822Z,1528867954.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:35.223Z,1528867955.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:35.623Z,1528867955.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:36.020Z,1528867956.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:36.428Z,1528867956.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:36.843Z,1528867956.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:37.262Z,1528867957.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:37.635Z,1528867957.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:38.024Z,1528867958.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:38.427Z,1528867958.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:38.828Z,1528867958.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:39.223Z,1528867959.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:39.657Z,1528867959.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:40.031Z,1528867960.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:40.435Z,1528867960.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:40.828Z,1528867960.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:41.224Z,1528867961.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:41.637Z,1528867961.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:42.026Z,1528867962.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:42.428Z,1528867962.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:42.836Z,1528867962.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:43.236Z,1528867963.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:43.631Z,1528867963.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:44.025Z,1528867964.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:44.427Z,1528867964.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:44.826Z,1528867964.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:45.230Z,1528867965.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:45.232Z,1528867965.232 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T05:32:45.233Z,1528867965.233 [Default:CheckIn:C.Wait] Stopped
2018-06-13T05:32:45.233Z,1528867965.233 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T05:32:45.233Z,1528867965.233 [Default:CheckIn:D] Running Loop=1
2018-06-13T05:32:45.635Z,1528867965.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:45.638Z,1528867965.638 [Default:CheckIn:D] Stopped
2018-06-13T05:32:45.638Z,1528867965.638 [Default:CheckIn:E] Running Loop=1
2018-06-13T05:32:48.761Z,1528867968.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:48.764Z,1528867968.764 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 125.536548 min 
2018-06-13T05:32:48.764Z,1528867968.764 [Default:CheckIn:E] Stopped
2018-06-13T05:32:48.764Z,1528867968.764 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T05:32:48.765Z,1528867968.765 [Default:CheckIn] Stopped
2018-06-13T05:32:48.765Z,1528867968.765 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T05:32:48.766Z,1528867968.766 [Default:CheckIn](INFO): Running loop #13
2018-06-13T05:32:48.766Z,1528867968.766 [Default:CheckIn] Running Loop=13
2018-06-13T05:32:48.766Z,1528867968.766 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T05:32:48.766Z,1528867968.766 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T05:32:48.918Z,1528867968.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:49.295Z,1528867969.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:49.696Z,1528867969.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:50.093Z,1528867970.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:50.494Z,1528867970.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:50.900Z,1528867970.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:51.302Z,1528867971.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:51.703Z,1528867971.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:52.093Z,1528867972.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:52.500Z,1528867972.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:52.896Z,1528867972.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:53.294Z,1528867973.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:53.727Z,1528867973.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:54.103Z,1528867974.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:54.507Z,1528867974.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:54.896Z,1528867974.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:55.299Z,1528867975.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:55.694Z,1528867975.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:56.099Z,1528867976.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:56.500Z,1528867976.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:56.904Z,1528867976.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:57.303Z,1528867977.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:57.704Z,1528867977.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:58.094Z,1528867978.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:58.506Z,1528867978.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:58.901Z,1528867978.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:59.303Z,1528867979.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:32:59.705Z,1528867979.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:00.105Z,1528867980.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:00.502Z,1528867980.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:00.896Z,1528867980.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:01.300Z,1528867981.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:01.690Z,1528867981.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:02.094Z,1528867982.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:02.496Z,1528867982.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:02.901Z,1528867982.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:03.308Z,1528867983.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:03.704Z,1528867983.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:04.092Z,1528867984.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:04.496Z,1528867984.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:04.902Z,1528867984.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:05.304Z,1528867985.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:05.703Z,1528867985.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:06.104Z,1528867986.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:06.504Z,1528867986.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:06.898Z,1528867986.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:07.309Z,1528867987.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:07.694Z,1528867987.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:08.095Z,1528867988.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:08.500Z,1528867988.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:08.908Z,1528867988.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:09.308Z,1528867989.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:09.704Z,1528867989.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:10.095Z,1528867990.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:10.496Z,1528867990.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:10.902Z,1528867990.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:11.294Z,1528867991.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:11.707Z,1528867991.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:12.112Z,1528867992.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:12.504Z,1528867992.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:12.894Z,1528867992.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:13.299Z,1528867993.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:13.694Z,1528867993.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:14.096Z,1528867994.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:14.499Z,1528867994.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:14.904Z,1528867994.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:15.307Z,1528867995.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:15.704Z,1528867995.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:16.092Z,1528867996.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:16.504Z,1528867996.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:16.901Z,1528867996.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:17.294Z,1528867997.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:17.703Z,1528867997.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:18.104Z,1528867998.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:18.503Z,1528867998.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:18.904Z,1528867998.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:19.296Z,1528867999.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:19.700Z,1528867999.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:20.099Z,1528868000.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:20.500Z,1528868000.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:20.901Z,1528868000.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:21.305Z,1528868001.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:21.707Z,1528868001.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:22.095Z,1528868002.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:22.496Z,1528868002.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:22.903Z,1528868002.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:23.295Z,1528868003.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:23.705Z,1528868003.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:24.104Z,1528868004.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:24.507Z,1528868004.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:24.898Z,1528868004.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:25.300Z,1528868005.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:25.695Z,1528868005.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:26.105Z,1528868006.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:26.508Z,1528868006.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:26.912Z,1528868006.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:27.308Z,1528868007.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:27.722Z,1528868007.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:28.096Z,1528868008.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:28.506Z,1528868008.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:28.907Z,1528868008.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:29.306Z,1528868009.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:29.708Z,1528868009.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:30.111Z,1528868010.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:30.512Z,1528868010.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:30.908Z,1528868010.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:31.308Z,1528868011.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:31.707Z,1528868011.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:32.112Z,1528868012.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:32.514Z,1528868012.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:32.910Z,1528868012.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:33.310Z,1528868013.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:33.715Z,1528868013.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:34.112Z,1528868014.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:34.524Z,1528868014.524 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:34.524Z,1528868014.524 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2018-06-13T05:33:34.524Z,1528868014.524 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:33:34.526Z,1528868014.526 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:34.526Z,1528868014.526 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43
2018-06-13T05:33:34.526Z,1528868014.526 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:33:34.528Z,1528868014.528 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:34.528Z,1528868014.528 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2018-06-13T05:33:34.528Z,1528868014.528 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:33:34.609Z,1528868014.609 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:33:34.609Z,1528868014.609 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:33:34.609Z,1528868014.609 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:33:34.993Z,1528868014.993 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:33:34.993Z,1528868014.993 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2018-06-13T05:33:34.994Z,1528868014.994 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:33:34.994Z,1528868014.994 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43
2018-06-13T05:33:34.994Z,1528868014.994 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:33:34.994Z,1528868014.994 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2018-06-13T05:33:35.297Z,1528868015.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:33:35.298Z,1528868015.298 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:33:35.298Z,1528868015.298 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:33:35.298Z,1528868015.298 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:33:35.299Z,1528868015.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:33:35.299Z,1528868015.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:33:35.299Z,1528868015.299 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:33:35.300Z,1528868015.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:33:35.300Z,1528868015.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:33:35.710Z,1528868015.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:33:35.711Z,1528868015.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:36.128Z,1528868016.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:33:36.128Z,1528868016.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:36.510Z,1528868016.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:33:36.511Z,1528868016.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:36.900Z,1528868016.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:33:36.901Z,1528868016.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:37.306Z,1528868017.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:33:37.307Z,1528868017.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:37.710Z,1528868017.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:33:37.711Z,1528868017.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:38.115Z,1528868018.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:33:38.116Z,1528868018.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:38.511Z,1528868018.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:33:38.512Z,1528868018.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:38.916Z,1528868018.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:33:38.916Z,1528868018.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:39.316Z,1528868019.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:33:39.316Z,1528868019.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:39.725Z,1528868019.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:33:39.726Z,1528868019.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:40.108Z,1528868020.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:33:40.110Z,1528868020.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:40.523Z,1528868020.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:33:40.524Z,1528868020.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:40.908Z,1528868020.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:33:40.909Z,1528868020.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:41.297Z,1528868021.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:33:41.298Z,1528868021.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:41.724Z,1528868021.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:33:41.726Z,1528868021.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:42.115Z,1528868022.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:33:42.116Z,1528868022.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:42.519Z,1528868022.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:33:42.520Z,1528868022.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:42.901Z,1528868022.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:33:42.902Z,1528868022.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:43.301Z,1528868023.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:33:43.302Z,1528868023.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:43.724Z,1528868023.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:33:43.724Z,1528868023.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:44.132Z,1528868024.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:33:44.132Z,1528868024.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:44.513Z,1528868024.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:33:44.514Z,1528868024.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:44.900Z,1528868024.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:33:44.901Z,1528868024.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:45.316Z,1528868025.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:33:45.316Z,1528868025.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:45.716Z,1528868025.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:33:45.718Z,1528868025.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:48.818Z,1528868028.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-06-13T05:33:48.819Z,1528868028.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:48.965Z,1528868028.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:33:48.966Z,1528868028.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:49.354Z,1528868029.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:33:49.355Z,1528868029.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:49.753Z,1528868029.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:33:49.754Z,1528868029.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:50.152Z,1528868030.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:33:50.153Z,1528868030.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:50.559Z,1528868030.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:33:50.560Z,1528868030.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:50.964Z,1528868030.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:33:50.965Z,1528868030.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:51.367Z,1528868031.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:33:51.368Z,1528868031.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:51.762Z,1528868031.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:33:51.763Z,1528868031.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:52.157Z,1528868032.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:33:52.158Z,1528868032.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:52.557Z,1528868032.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:33:52.558Z,1528868032.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:52.954Z,1528868032.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:33:52.955Z,1528868032.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:53.359Z,1528868033.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:33:53.360Z,1528868033.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:53.766Z,1528868033.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:33:53.767Z,1528868033.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:54.165Z,1528868034.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:33:54.166Z,1528868034.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:54.566Z,1528868034.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:54.943Z,1528868034.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:55.344Z,1528868035.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:55.744Z,1528868035.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:56.144Z,1528868036.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:56.572Z,1528868036.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:56.973Z,1528868036.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:57.370Z,1528868037.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:57.780Z,1528868037.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:58.150Z,1528868038.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:58.554Z,1528868038.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:58.952Z,1528868038.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:59.347Z,1528868039.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:33:59.755Z,1528868039.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:00.155Z,1528868040.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:00.555Z,1528868040.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:00.947Z,1528868040.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:01.371Z,1528868041.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:01.747Z,1528868041.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:02.149Z,1528868042.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:02.547Z,1528868042.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:02.950Z,1528868042.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:03.360Z,1528868043.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:03.755Z,1528868043.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:04.146Z,1528868044.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:04.549Z,1528868044.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:04.971Z,1528868044.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:05.351Z,1528868045.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:05.759Z,1528868045.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:06.158Z,1528868046.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:06.555Z,1528868046.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:06.957Z,1528868046.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:07.360Z,1528868047.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:07.759Z,1528868047.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:08.168Z,1528868048.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:08.571Z,1528868048.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:08.953Z,1528868048.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:09.360Z,1528868049.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:09.768Z,1528868049.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:10.160Z,1528868050.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:10.561Z,1528868050.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:10.956Z,1528868050.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:11.353Z,1528868051.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:11.762Z,1528868051.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:12.162Z,1528868052.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:12.576Z,1528868052.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:12.954Z,1528868052.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:13.372Z,1528868053.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:13.764Z,1528868053.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:14.168Z,1528868054.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:14.566Z,1528868054.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:14.950Z,1528868054.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:15.360Z,1528868055.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:15.767Z,1528868055.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:16.165Z,1528868056.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:16.560Z,1528868056.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:16.960Z,1528868056.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:17.360Z,1528868057.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:17.765Z,1528868057.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:18.170Z,1528868058.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:18.562Z,1528868058.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:18.975Z,1528868058.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:19.352Z,1528868059.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:19.764Z,1528868059.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:20.176Z,1528868060.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:20.587Z,1528868060.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:20.968Z,1528868060.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:21.364Z,1528868061.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:21.767Z,1528868061.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:22.180Z,1528868062.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:22.586Z,1528868062.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.406183 seconds old.
2018-06-13T05:34:22.587Z,1528868062.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:22.587Z,1528868062.587 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.406641 seconds old.
2018-06-13T05:34:22.588Z,1528868062.588 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.406765 seconds old.
2018-06-13T05:34:22.970Z,1528868062.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.790348 seconds old.
2018-06-13T05:34:22.971Z,1528868062.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:22.971Z,1528868062.971 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.790701 seconds old.
2018-06-13T05:34:22.977Z,1528868062.977 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.790837 seconds old.
2018-06-13T05:34:23.344Z,1528868063.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:23.767Z,1528868063.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:24.170Z,1528868064.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:24.579Z,1528868064.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:24.950Z,1528868064.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:25.381Z,1528868065.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:25.756Z,1528868065.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:26.159Z,1528868066.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:26.558Z,1528868066.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:26.960Z,1528868066.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:27.346Z,1528868067.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:27.760Z,1528868067.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:28.163Z,1528868068.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:28.585Z,1528868068.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:28.947Z,1528868068.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:29.344Z,1528868069.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:29.759Z,1528868069.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:30.166Z,1528868070.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:30.564Z,1528868070.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:30.947Z,1528868070.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:31.326Z,1528868071.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:31.349Z,1528868071.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:31.735Z,1528868071.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:31.753Z,1528868071.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:32.141Z,1528868072.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:32.160Z,1528868072.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:32.543Z,1528868072.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:32.566Z,1528868072.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:32.930Z,1528868072.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:32.952Z,1528868072.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:33.332Z,1528868073.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:33.356Z,1528868073.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:33.742Z,1528868073.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:33.792Z,1528868073.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:34.139Z,1528868074.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:34.162Z,1528868074.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:34.538Z,1528868074.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:34.562Z,1528868074.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:34.930Z,1528868074.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:34.947Z,1528868074.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:35.320Z,1528868075.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:35.355Z,1528868075.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:35.742Z,1528868075.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:35.765Z,1528868075.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:36.143Z,1528868076.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:36.165Z,1528868076.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:36.539Z,1528868076.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:36.556Z,1528868076.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:36.927Z,1528868076.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:36.952Z,1528868076.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:37.319Z,1528868077.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:37.348Z,1528868077.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:37.739Z,1528868077.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:37.763Z,1528868077.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:38.143Z,1528868078.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:38.161Z,1528868078.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:38.544Z,1528868078.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:38.561Z,1528868078.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:38.923Z,1528868078.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:38.966Z,1528868078.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:39.324Z,1528868079.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:39.368Z,1528868079.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:39.719Z,1528868079.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:39.759Z,1528868079.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:40.140Z,1528868080.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:40.158Z,1528868080.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:40.543Z,1528868080.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:40.561Z,1528868080.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:40.940Z,1528868080.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:40.963Z,1528868080.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:41.323Z,1528868081.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:41.350Z,1528868081.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:41.719Z,1528868081.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:41.755Z,1528868081.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:42.124Z,1528868082.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:42.153Z,1528868082.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:42.523Z,1528868082.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:42.550Z,1528868082.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:42.939Z,1528868082.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:42.957Z,1528868082.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:43.333Z,1528868083.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:43.364Z,1528868083.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:43.739Z,1528868083.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:43.757Z,1528868083.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:44.123Z,1528868084.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:44.163Z,1528868084.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:44.523Z,1528868084.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:44.556Z,1528868084.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:44.924Z,1528868084.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:44.959Z,1528868084.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:45.327Z,1528868085.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:45.354Z,1528868085.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:45.727Z,1528868085.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:45.756Z,1528868085.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:48.854Z,1528868088.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:48.872Z,1528868088.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:49.008Z,1528868089.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:49.026Z,1528868089.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:49.410Z,1528868089.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:49.432Z,1528868089.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:49.798Z,1528868089.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:49.816Z,1528868089.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:50.192Z,1528868090.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:50.216Z,1528868090.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:50.593Z,1528868090.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:50.611Z,1528868090.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:51.008Z,1528868091.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:51.032Z,1528868091.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:51.407Z,1528868091.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:51.425Z,1528868091.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:51.803Z,1528868091.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:51.842Z,1528868091.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:52.193Z,1528868092.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:52.216Z,1528868092.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:52.583Z,1528868092.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:52.628Z,1528868092.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:52.995Z,1528868092.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:53.016Z,1528868093.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:53.384Z,1528868093.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:53.417Z,1528868093.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:53.799Z,1528868093.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:53.830Z,1528868093.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:54.205Z,1528868094.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:54.226Z,1528868094.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:54.604Z,1528868094.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:54.622Z,1528868094.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:54.982Z,1528868094.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:55.025Z,1528868095.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:55.386Z,1528868095.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:55.415Z,1528868095.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:55.810Z,1528868095.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:55.830Z,1528868095.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:56.208Z,1528868096.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:56.226Z,1528868096.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:56.605Z,1528868096.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:56.648Z,1528868096.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:56.986Z,1528868096.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:57.015Z,1528868097.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:57.383Z,1528868097.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:57.428Z,1528868097.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:57.808Z,1528868097.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:57.826Z,1528868097.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:58.207Z,1528868098.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:58.246Z,1528868098.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:58.602Z,1528868098.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:58.619Z,1528868098.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:58.984Z,1528868098.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:59.027Z,1528868099.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:59.383Z,1528868099.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:59.423Z,1528868099.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:34:59.807Z,1528868099.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:34:59.824Z,1528868099.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:00.204Z,1528868100.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:00.246Z,1528868100.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:00.600Z,1528868100.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:00.636Z,1528868100.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:00.982Z,1528868100.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:01.016Z,1528868101.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:01.387Z,1528868101.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:01.428Z,1528868101.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:01.803Z,1528868101.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:01.822Z,1528868101.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:02.205Z,1528868102.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:02.254Z,1528868102.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:02.608Z,1528868102.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:02.629Z,1528868102.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:02.984Z,1528868102.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:03.028Z,1528868103.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:03.383Z,1528868103.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:03.428Z,1528868103.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:03.805Z,1528868103.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:03.848Z,1528868103.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:04.209Z,1528868104.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:04.231Z,1528868104.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:04.606Z,1528868104.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:04.634Z,1528868104.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:04.986Z,1528868104.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:05.024Z,1528868105.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:05.380Z,1528868105.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:05.416Z,1528868105.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:05.798Z,1528868105.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:05.828Z,1528868105.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:06.210Z,1528868106.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:06.229Z,1528868106.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:06.590Z,1528868106.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:06.634Z,1528868106.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:06.984Z,1528868106.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:07.014Z,1528868107.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:07.384Z,1528868107.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:07.423Z,1528868107.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:07.789Z,1528868107.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:07.832Z,1528868107.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:08.208Z,1528868108.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:08.227Z,1528868108.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:08.606Z,1528868108.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:08.639Z,1528868108.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:08.984Z,1528868108.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:09.032Z,1528868109.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:09.383Z,1528868109.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:09.422Z,1528868109.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:09.799Z,1528868109.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:09.834Z,1528868109.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:10.198Z,1528868110.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:10.251Z,1528868110.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:10.593Z,1528868110.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:10.636Z,1528868110.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:10.984Z,1528868110.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:11.017Z,1528868111.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:11.383Z,1528868111.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:11.421Z,1528868111.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:11.802Z,1528868111.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:11.829Z,1528868111.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:12.200Z,1528868112.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:12.235Z,1528868112.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:12.593Z,1528868112.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:12.641Z,1528868112.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:12.986Z,1528868112.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:13.008Z,1528868113.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:13.386Z,1528868113.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:13.405Z,1528868113.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:13.790Z,1528868113.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:13.808Z,1528868113.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:14.198Z,1528868114.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:14.236Z,1528868114.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:14.598Z,1528868114.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:14.637Z,1528868114.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:14.986Z,1528868114.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:15.004Z,1528868115.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:15.387Z,1528868115.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:15.410Z,1528868115.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:15.787Z,1528868115.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:15.820Z,1528868115.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:16.195Z,1528868116.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:16.231Z,1528868116.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:16.602Z,1528868116.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:16.620Z,1528868116.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:17.002Z,1528868117.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:17.036Z,1528868117.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:17.383Z,1528868117.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:17.411Z,1528868117.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:17.783Z,1528868117.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:17.825Z,1528868117.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:18.184Z,1528868118.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:18.224Z,1528868118.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:18.583Z,1528868118.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:18.616Z,1528868118.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:19.005Z,1528868119.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:19.025Z,1528868119.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:19.405Z,1528868119.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:19.428Z,1528868119.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:19.800Z,1528868119.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:19.824Z,1528868119.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:20.183Z,1528868120.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:20.266Z,1528868120.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:20.583Z,1528868120.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:20.618Z,1528868120.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:20.979Z,1528868120.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:21.021Z,1528868121.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:21.388Z,1528868121.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:21.415Z,1528868121.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:21.783Z,1528868121.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:21.817Z,1528868121.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:22.189Z,1528868122.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:22.218Z,1528868122.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:22.604Z,1528868122.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:22.631Z,1528868122.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:23.005Z,1528868123.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:23.028Z,1528868123.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:23.379Z,1528868123.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:23.412Z,1528868123.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:23.784Z,1528868123.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:23.820Z,1528868123.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:24.184Z,1528868124.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:24.215Z,1528868124.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:24.583Z,1528868124.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:24.617Z,1528868124.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:24.966Z,1528868124.966 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T05:35:24.967Z,1528868124.967 [NAL9602] Data Fault, FailCount= 2
2018-06-13T05:35:24.967Z,1528868124.967 [NAL9602](ERROR): Data Fault
2018-06-13T05:35:24.983Z,1528868124.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:25.002Z,1528868125.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:25.101Z,1528868125.101 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T05:35:25.366Z,1528868125.366 [NAL9602](INFO): Powering down
2018-06-13T05:35:25.384Z,1528868125.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:25.402Z,1528868125.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:25.782Z,1528868125.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:25.801Z,1528868125.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:26.186Z,1528868126.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:26.204Z,1528868126.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:26.281Z,1528868126.281 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T05:35:26.281Z,1528868126.281 [NAL9602] No Fault, FailCount= 2
2018-06-13T05:35:26.584Z,1528868126.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:26.604Z,1528868126.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:26.983Z,1528868126.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:27.002Z,1528868127.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:27.387Z,1528868127.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:27.409Z,1528868127.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:27.784Z,1528868127.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:27.805Z,1528868127.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:28.188Z,1528868128.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:28.207Z,1528868128.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:28.587Z,1528868128.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:28.610Z,1528868128.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:28.987Z,1528868128.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:29.005Z,1528868129.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:29.388Z,1528868129.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:29.407Z,1528868129.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:29.787Z,1528868129.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:29.806Z,1528868129.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:30.188Z,1528868130.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:30.206Z,1528868130.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:30.585Z,1528868130.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:30.603Z,1528868130.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:30.987Z,1528868130.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:31.006Z,1528868131.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:31.389Z,1528868131.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:31.407Z,1528868131.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:31.784Z,1528868131.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:31.802Z,1528868131.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:32.187Z,1528868132.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:32.209Z,1528868132.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:32.584Z,1528868132.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:32.604Z,1528868132.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:32.984Z,1528868132.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:33.003Z,1528868133.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:33.387Z,1528868133.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:33.423Z,1528868133.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:33.788Z,1528868133.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:33.806Z,1528868133.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:34.188Z,1528868134.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:34.207Z,1528868134.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:34.587Z,1528868134.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:34.621Z,1528868134.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:34.982Z,1528868134.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:35.010Z,1528868135.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:35.379Z,1528868135.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:35.412Z,1528868135.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:35.783Z,1528868135.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:35.819Z,1528868135.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:36.178Z,1528868136.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:36.219Z,1528868136.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:36.578Z,1528868136.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:36.613Z,1528868136.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:36.983Z,1528868136.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:37.020Z,1528868137.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:37.379Z,1528868137.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:37.405Z,1528868137.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:37.778Z,1528868137.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:37.796Z,1528868137.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:38.183Z,1528868138.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:38.213Z,1528868138.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:38.586Z,1528868138.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:38.604Z,1528868138.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:38.986Z,1528868138.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:39.005Z,1528868139.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:39.386Z,1528868139.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:39.404Z,1528868139.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:39.786Z,1528868139.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:39.804Z,1528868139.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:40.188Z,1528868140.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:40.207Z,1528868140.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:40.585Z,1528868140.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:40.603Z,1528868140.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:40.986Z,1528868140.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:41.004Z,1528868141.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:41.386Z,1528868141.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:41.404Z,1528868141.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:41.787Z,1528868141.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:41.822Z,1528868141.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:42.186Z,1528868142.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:42.205Z,1528868142.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:42.586Z,1528868142.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:42.604Z,1528868142.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:42.990Z,1528868142.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:43.009Z,1528868143.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:43.389Z,1528868143.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:43.407Z,1528868143.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:43.778Z,1528868143.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:43.808Z,1528868143.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:44.194Z,1528868144.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:44.220Z,1528868144.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:44.589Z,1528868144.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:44.607Z,1528868144.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:44.980Z,1528868144.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:45.011Z,1528868145.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:45.390Z,1528868145.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:45.408Z,1528868145.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:45.793Z,1528868145.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:45.812Z,1528868145.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:48.903Z,1528868148.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:48.921Z,1528868148.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:49.056Z,1528868149.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:49.103Z,1528868149.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:49.455Z,1528868149.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:49.476Z,1528868149.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:49.853Z,1528868149.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:49.876Z,1528868149.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:50.255Z,1528868150.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:50.273Z,1528868150.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:50.653Z,1528868150.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:50.670Z,1528868150.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:51.050Z,1528868151.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:51.068Z,1528868151.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:51.453Z,1528868151.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:51.476Z,1528868151.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:51.853Z,1528868151.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:51.871Z,1528868151.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:52.252Z,1528868152.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:52.272Z,1528868152.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:52.652Z,1528868152.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:52.671Z,1528868152.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:53.053Z,1528868153.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:53.077Z,1528868153.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:53.448Z,1528868153.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:53.467Z,1528868153.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:53.852Z,1528868153.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:53.871Z,1528868153.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:54.251Z,1528868154.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:54.269Z,1528868154.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:54.648Z,1528868154.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:54.667Z,1528868154.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:55.053Z,1528868155.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:55.071Z,1528868155.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:55.426Z,1528868155.426 [NAL9602](INFO): Powering up NAL9602
2018-06-13T05:35:55.453Z,1528868155.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:55.471Z,1528868155.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:55.849Z,1528868155.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:55.867Z,1528868155.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:56.254Z,1528868156.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:56.275Z,1528868156.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:56.652Z,1528868156.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:56.669Z,1528868156.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:57.052Z,1528868157.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:57.071Z,1528868157.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:57.451Z,1528868157.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:57.473Z,1528868157.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:57.857Z,1528868157.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:57.878Z,1528868157.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:58.252Z,1528868158.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:58.270Z,1528868158.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:58.645Z,1528868158.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:58.679Z,1528868158.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:59.053Z,1528868159.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:59.070Z,1528868159.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:59.448Z,1528868159.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:59.466Z,1528868159.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:35:59.854Z,1528868159.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:35:59.872Z,1528868159.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:00.253Z,1528868160.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:00.270Z,1528868160.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:00.649Z,1528868160.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:00.670Z,1528868160.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:01.050Z,1528868161.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:01.073Z,1528868161.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:01.448Z,1528868161.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:01.466Z,1528868161.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:01.849Z,1528868161.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:01.868Z,1528868161.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:02.250Z,1528868162.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:02.273Z,1528868162.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:02.657Z,1528868162.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:02.674Z,1528868162.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:03.049Z,1528868163.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:03.067Z,1528868163.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:03.450Z,1528868163.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:03.473Z,1528868163.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:03.852Z,1528868163.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:03.870Z,1528868163.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:04.253Z,1528868164.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:04.270Z,1528868164.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:04.650Z,1528868164.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:04.683Z,1528868164.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:05.048Z,1528868165.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:05.072Z,1528868165.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:05.450Z,1528868165.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:05.468Z,1528868165.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:05.843Z,1528868165.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:05.878Z,1528868165.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:06.263Z,1528868166.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:06.281Z,1528868166.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:06.630Z,1528868166.630 [NAL9602](INFO): NAL9602 initialized
2018-06-13T05:36:06.647Z,1528868166.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:06.688Z,1528868166.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:07.047Z,1528868167.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:07.083Z,1528868167.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:07.467Z,1528868167.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:07.485Z,1528868167.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:07.867Z,1528868167.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:07.885Z,1528868167.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:08.263Z,1528868168.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:08.281Z,1528868168.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:08.647Z,1528868168.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:08.683Z,1528868168.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:09.047Z,1528868169.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:09.083Z,1528868169.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:09.448Z,1528868169.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:09.482Z,1528868169.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:09.847Z,1528868169.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:09.881Z,1528868169.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:10.254Z,1528868170.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:10.287Z,1528868170.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:10.665Z,1528868170.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:10.694Z,1528868170.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:11.066Z,1528868171.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:11.094Z,1528868171.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:11.451Z,1528868171.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:11.470Z,1528868171.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:11.850Z,1528868171.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:11.868Z,1528868171.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:12.251Z,1528868172.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:12.268Z,1528868172.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:12.649Z,1528868172.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:12.667Z,1528868172.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:13.050Z,1528868173.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:13.068Z,1528868173.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:13.461Z,1528868173.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:13.496Z,1528868173.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:13.861Z,1528868173.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:13.879Z,1528868173.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:14.261Z,1528868174.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:14.279Z,1528868174.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:14.654Z,1528868174.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:14.672Z,1528868174.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:15.052Z,1528868175.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:15.076Z,1528868175.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:15.451Z,1528868175.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:15.483Z,1528868175.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:15.851Z,1528868175.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:15.885Z,1528868175.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:16.264Z,1528868176.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:16.282Z,1528868176.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:16.665Z,1528868176.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:16.684Z,1528868176.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:17.068Z,1528868177.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:17.092Z,1528868177.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:17.453Z,1528868177.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:17.470Z,1528868177.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:17.850Z,1528868177.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:17.882Z,1528868177.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:18.254Z,1528868178.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:18.273Z,1528868178.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:18.644Z,1528868178.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:18.679Z,1528868178.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:19.048Z,1528868179.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:19.083Z,1528868179.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:19.467Z,1528868179.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:19.486Z,1528868179.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:19.867Z,1528868179.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:19.885Z,1528868179.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:20.264Z,1528868180.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:20.282Z,1528868180.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:20.647Z,1528868180.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:20.692Z,1528868180.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:21.043Z,1528868181.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:21.085Z,1528868181.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:21.448Z,1528868181.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:21.488Z,1528868181.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:21.847Z,1528868181.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:21.876Z,1528868181.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:22.263Z,1528868182.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:22.282Z,1528868182.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:22.667Z,1528868182.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:22.685Z,1528868182.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:23.068Z,1528868183.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:23.087Z,1528868183.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:23.443Z,1528868183.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:23.476Z,1528868183.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:23.848Z,1528868183.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:23.886Z,1528868183.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:24.247Z,1528868184.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:24.278Z,1528868184.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:24.648Z,1528868184.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:24.665Z,1528868184.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:25.047Z,1528868185.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:25.083Z,1528868185.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:25.465Z,1528868185.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:25.499Z,1528868185.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:25.865Z,1528868185.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:25.899Z,1528868185.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:26.265Z,1528868186.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:26.298Z,1528868186.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:26.651Z,1528868186.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:26.670Z,1528868186.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:27.049Z,1528868187.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:27.067Z,1528868187.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:27.456Z,1528868187.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:27.474Z,1528868187.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:27.851Z,1528868187.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:27.870Z,1528868187.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:28.257Z,1528868188.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:28.275Z,1528868188.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:28.669Z,1528868188.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:28.703Z,1528868188.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:29.060Z,1528868189.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:29.078Z,1528868189.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:29.447Z,1528868189.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:29.480Z,1528868189.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:29.851Z,1528868189.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:29.880Z,1528868189.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:30.254Z,1528868190.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:30.279Z,1528868190.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:30.644Z,1528868190.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:30.676Z,1528868190.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:31.050Z,1528868191.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:31.076Z,1528868191.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:31.466Z,1528868191.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:31.484Z,1528868191.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:31.864Z,1528868191.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:31.882Z,1528868191.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:32.264Z,1528868192.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:32.283Z,1528868192.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:32.654Z,1528868192.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:32.673Z,1528868192.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:33.043Z,1528868193.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:33.076Z,1528868193.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:33.458Z,1528868193.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:33.476Z,1528868193.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:33.843Z,1528868193.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:33.871Z,1528868193.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:34.263Z,1528868194.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:34.282Z,1528868194.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:34.667Z,1528868194.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:34.684Z,1528868194.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:35.067Z,1528868195.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:35.084Z,1528868195.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:35.443Z,1528868195.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:35.471Z,1528868195.471 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:35.471Z,1528868195.471 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2018-06-13T05:36:35.471Z,1528868195.471 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:36:35.473Z,1528868195.473 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:35.473Z,1528868195.473 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44
2018-06-13T05:36:35.474Z,1528868195.474 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:36:35.475Z,1528868195.475 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:35.475Z,1528868195.475 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2018-06-13T05:36:35.475Z,1528868195.475 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:36:35.556Z,1528868195.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:36:35.556Z,1528868195.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:36:35.557Z,1528868195.557 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:36:35.843Z,1528868195.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:35.956Z,1528868195.956 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:36:35.956Z,1528868195.956 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2018-06-13T05:36:35.956Z,1528868195.956 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:36:35.956Z,1528868195.956 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44
2018-06-13T05:36:35.957Z,1528868195.957 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:36:35.957Z,1528868195.957 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2018-06-13T05:36:36.243Z,1528868196.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:36.278Z,1528868196.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:36:36.279Z,1528868196.279 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:36:36.279Z,1528868196.279 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:36:36.280Z,1528868196.280 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:36:36.280Z,1528868196.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:36:36.280Z,1528868196.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:36:36.281Z,1528868196.281 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:36:36.281Z,1528868196.281 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:36:36.282Z,1528868196.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:36:36.643Z,1528868196.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:36.677Z,1528868196.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:36:36.678Z,1528868196.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:37.047Z,1528868197.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:37.082Z,1528868197.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:36:37.083Z,1528868197.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:37.469Z,1528868197.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:37.486Z,1528868197.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:36:37.487Z,1528868197.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:37.857Z,1528868197.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:37.892Z,1528868197.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:36:37.893Z,1528868197.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:38.270Z,1528868198.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:38.300Z,1528868198.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:36:38.301Z,1528868198.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:38.643Z,1528868198.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:38.660Z,1528868198.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:36:38.677Z,1528868198.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:39.043Z,1528868199.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:39.088Z,1528868199.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:36:39.089Z,1528868199.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:39.448Z,1528868199.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:39.465Z,1528868199.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:36:39.466Z,1528868199.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:39.847Z,1528868199.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:39.864Z,1528868199.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:36:39.865Z,1528868199.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:40.258Z,1528868200.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:40.295Z,1528868200.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:36:40.296Z,1528868200.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:40.665Z,1528868200.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:40.699Z,1528868200.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:36:40.700Z,1528868200.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:41.061Z,1528868201.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:41.096Z,1528868201.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:36:41.097Z,1528868201.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:41.447Z,1528868201.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:41.464Z,1528868201.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:36:41.465Z,1528868201.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:41.850Z,1528868201.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:41.868Z,1528868201.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:36:41.869Z,1528868201.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:42.250Z,1528868202.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:42.268Z,1528868202.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:36:42.268Z,1528868202.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:42.651Z,1528868202.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:42.668Z,1528868202.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:36:42.669Z,1528868202.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:43.050Z,1528868203.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:43.072Z,1528868203.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:36:43.093Z,1528868203.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:43.457Z,1528868203.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:43.474Z,1528868203.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:36:43.475Z,1528868203.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:43.861Z,1528868203.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:43.903Z,1528868203.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:36:43.903Z,1528868203.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:44.261Z,1528868204.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:44.279Z,1528868204.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:36:44.280Z,1528868204.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:44.653Z,1528868204.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:44.670Z,1528868204.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:36:44.670Z,1528868204.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:45.054Z,1528868205.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:45.071Z,1528868205.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:36:45.072Z,1528868205.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:45.454Z,1528868205.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:45.476Z,1528868205.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:36:45.477Z,1528868205.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:45.854Z,1528868205.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:45.871Z,1528868205.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:36:45.872Z,1528868205.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:46.262Z,1528868206.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:46.279Z,1528868206.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:36:46.280Z,1528868206.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:46.661Z,1528868206.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:46.679Z,1528868206.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:36:46.679Z,1528868206.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:47.062Z,1528868207.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:47.079Z,1528868207.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:36:47.080Z,1528868207.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:50.165Z,1528868210.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:50.183Z,1528868210.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T05:36:50.184Z,1528868210.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:50.318Z,1528868210.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:50.364Z,1528868210.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T05:36:50.366Z,1528868210.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:50.729Z,1528868210.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:50.768Z,1528868210.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T05:36:50.769Z,1528868210.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:51.133Z,1528868211.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:51.158Z,1528868211.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T05:36:51.159Z,1528868211.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:51.529Z,1528868211.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:51.561Z,1528868211.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T05:36:51.562Z,1528868211.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:51.914Z,1528868211.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:51.931Z,1528868211.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T05:36:51.931Z,1528868211.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:52.314Z,1528868212.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:52.331Z,1528868212.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T05:36:52.332Z,1528868212.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:52.717Z,1528868212.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:52.735Z,1528868212.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T05:36:52.736Z,1528868212.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:53.119Z,1528868213.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:53.136Z,1528868213.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T05:36:53.137Z,1528868213.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:53.525Z,1528868213.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:53.543Z,1528868213.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T05:36:53.544Z,1528868213.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:53.929Z,1528868213.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:53.946Z,1528868213.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T05:36:53.947Z,1528868213.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:54.325Z,1528868214.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:54.347Z,1528868214.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T05:36:54.348Z,1528868214.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:54.716Z,1528868214.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:54.734Z,1528868214.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T05:36:54.735Z,1528868214.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:55.121Z,1528868215.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:55.138Z,1528868215.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T05:36:55.139Z,1528868215.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:55.512Z,1528868215.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:55.547Z,1528868215.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:55.917Z,1528868215.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:55.935Z,1528868215.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:56.326Z,1528868216.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:56.343Z,1528868216.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:56.729Z,1528868216.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:56.746Z,1528868216.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:57.126Z,1528868217.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:57.144Z,1528868217.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:57.521Z,1528868217.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:57.538Z,1528868217.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:57.919Z,1528868217.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:57.936Z,1528868217.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:58.321Z,1528868218.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:58.339Z,1528868218.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:58.720Z,1528868218.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:58.744Z,1528868218.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:59.121Z,1528868219.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:59.144Z,1528868219.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:59.526Z,1528868219.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:59.548Z,1528868219.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:36:59.930Z,1528868219.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:36:59.948Z,1528868219.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:00.329Z,1528868220.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:00.352Z,1528868220.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:00.721Z,1528868220.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:00.744Z,1528868220.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:01.121Z,1528868221.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:01.139Z,1528868221.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:01.522Z,1528868221.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:01.539Z,1528868221.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:01.921Z,1528868221.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:01.939Z,1528868221.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:02.326Z,1528868222.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:02.348Z,1528868222.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:02.729Z,1528868222.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:02.747Z,1528868222.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:03.126Z,1528868223.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:03.144Z,1528868223.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:03.520Z,1528868223.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:03.538Z,1528868223.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:03.917Z,1528868223.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:03.935Z,1528868223.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:04.321Z,1528868224.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:04.339Z,1528868224.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:04.716Z,1528868224.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:04.746Z,1528868224.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:05.115Z,1528868225.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:05.148Z,1528868225.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:05.527Z,1528868225.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:05.545Z,1528868225.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:05.932Z,1528868225.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:05.949Z,1528868225.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:06.332Z,1528868226.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:06.356Z,1528868226.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:06.715Z,1528868226.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:06.743Z,1528868226.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:07.111Z,1528868227.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:07.141Z,1528868227.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:07.515Z,1528868227.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:07.543Z,1528868227.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:07.915Z,1528868227.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:07.942Z,1528868227.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:08.331Z,1528868228.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:08.348Z,1528868228.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:08.732Z,1528868228.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:08.756Z,1528868228.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:09.131Z,1528868229.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:09.149Z,1528868229.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:09.512Z,1528868229.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:09.547Z,1528868229.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:09.915Z,1528868229.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:09.944Z,1528868229.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:10.315Z,1528868230.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:10.342Z,1528868230.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:10.712Z,1528868230.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:10.743Z,1528868230.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:11.115Z,1528868231.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:11.143Z,1528868231.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:11.532Z,1528868231.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:11.550Z,1528868231.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:11.931Z,1528868231.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:11.949Z,1528868231.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:12.337Z,1528868232.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:12.360Z,1528868232.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:12.715Z,1528868232.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:12.743Z,1528868232.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:13.112Z,1528868233.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:13.148Z,1528868233.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:13.516Z,1528868233.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:13.547Z,1528868233.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:13.909Z,1528868233.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:13.939Z,1528868233.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:14.337Z,1528868234.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:14.354Z,1528868234.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:14.736Z,1528868234.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:14.760Z,1528868234.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:15.122Z,1528868235.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:15.158Z,1528868235.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:15.515Z,1528868235.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:15.548Z,1528868235.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:15.911Z,1528868235.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:15.949Z,1528868235.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:16.312Z,1528868236.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:16.346Z,1528868236.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:16.715Z,1528868236.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:16.754Z,1528868236.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:17.111Z,1528868237.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:17.130Z,1528868237.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:17.521Z,1528868237.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:17.556Z,1528868237.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:17.925Z,1528868237.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:17.959Z,1528868237.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:18.330Z,1528868238.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:18.370Z,1528868238.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:18.713Z,1528868238.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:18.730Z,1528868238.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:19.118Z,1528868239.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:19.136Z,1528868239.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:19.518Z,1528868239.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:19.536Z,1528868239.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:19.912Z,1528868239.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:19.930Z,1528868239.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:20.329Z,1528868240.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:20.368Z,1528868240.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:20.729Z,1528868240.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:20.747Z,1528868240.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:21.122Z,1528868241.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:21.140Z,1528868241.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:21.520Z,1528868241.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:21.537Z,1528868241.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:21.921Z,1528868241.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:21.944Z,1528868241.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:22.312Z,1528868242.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:22.334Z,1528868242.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:22.721Z,1528868242.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:22.739Z,1528868242.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:23.122Z,1528868243.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:23.140Z,1528868243.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:23.522Z,1528868243.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:23.544Z,1528868243.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:23.929Z,1528868243.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:23.947Z,1528868243.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:24.329Z,1528868244.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:24.347Z,1528868244.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:24.713Z,1528868244.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:24.731Z,1528868244.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:25.120Z,1528868245.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:25.138Z,1528868245.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:25.521Z,1528868245.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:25.544Z,1528868245.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:25.920Z,1528868245.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:25.938Z,1528868245.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:26.325Z,1528868246.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:26.343Z,1528868246.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:26.729Z,1528868246.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:26.747Z,1528868246.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:27.122Z,1528868247.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:27.144Z,1528868247.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:27.520Z,1528868247.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:27.537Z,1528868247.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:27.916Z,1528868247.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:27.948Z,1528868247.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:28.317Z,1528868248.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:28.334Z,1528868248.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:28.715Z,1528868248.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:28.745Z,1528868248.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:29.122Z,1528868249.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:29.144Z,1528868249.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:29.526Z,1528868249.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:29.548Z,1528868249.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:29.930Z,1528868249.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:29.948Z,1528868249.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:30.327Z,1528868250.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:30.344Z,1528868250.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:30.717Z,1528868250.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:30.735Z,1528868250.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:31.115Z,1528868251.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:31.141Z,1528868251.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:31.522Z,1528868251.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:31.540Z,1528868251.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:31.917Z,1528868251.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:31.935Z,1528868251.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:32.328Z,1528868252.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:32.346Z,1528868252.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:32.731Z,1528868252.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:32.749Z,1528868252.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:33.128Z,1528868253.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:33.152Z,1528868253.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:33.521Z,1528868253.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:33.538Z,1528868253.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:33.922Z,1528868253.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:33.939Z,1528868253.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:34.317Z,1528868254.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:34.335Z,1528868254.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:34.715Z,1528868254.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:34.742Z,1528868254.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:35.122Z,1528868255.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:35.144Z,1528868255.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:35.528Z,1528868255.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:35.546Z,1528868255.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:35.934Z,1528868255.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:35.956Z,1528868255.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:36.335Z,1528868256.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:36.352Z,1528868256.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:36.711Z,1528868256.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:36.748Z,1528868256.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:37.121Z,1528868257.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:37.138Z,1528868257.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:37.512Z,1528868257.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:37.540Z,1528868257.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:37.911Z,1528868257.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:37.949Z,1528868257.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:38.331Z,1528868258.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:38.349Z,1528868258.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:38.736Z,1528868258.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:38.755Z,1528868258.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:39.127Z,1528868259.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:39.145Z,1528868259.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:39.516Z,1528868259.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:39.543Z,1528868259.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:39.915Z,1528868259.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:39.944Z,1528868259.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:40.311Z,1528868260.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:40.348Z,1528868260.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:40.716Z,1528868260.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:40.743Z,1528868260.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:41.115Z,1528868261.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:41.144Z,1528868261.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:41.528Z,1528868261.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:41.546Z,1528868261.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:41.935Z,1528868261.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:41.960Z,1528868261.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:42.336Z,1528868262.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:42.355Z,1528868262.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:42.711Z,1528868262.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:42.749Z,1528868262.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:43.115Z,1528868263.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:43.153Z,1528868263.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:43.512Z,1528868263.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:43.556Z,1528868263.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:43.915Z,1528868263.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:43.956Z,1528868263.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:44.325Z,1528868264.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:44.359Z,1528868264.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:44.729Z,1528868264.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:44.763Z,1528868264.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:45.122Z,1528868265.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:45.139Z,1528868265.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:45.518Z,1528868265.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:45.535Z,1528868265.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:45.918Z,1528868265.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:45.936Z,1528868265.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:49.031Z,1528868269.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:49.065Z,1528868269.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:49.073Z,1528868269.073 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T05:32:48.8Z
2018-06-13T05:37:49.073Z,1528868269.073 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T05:37:49.073Z,1528868269.073 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T05:37:49.191Z,1528868269.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:49.221Z,1528868269.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:50.345Z,1528868270.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:50.375Z,1528868270.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:50.513Z,1528868270.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:50.531Z,1528868270.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:50.912Z,1528868270.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:50.930Z,1528868270.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:51.295Z,1528868271.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:51.323Z,1528868271.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:51.692Z,1528868271.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:51.723Z,1528868271.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:52.093Z,1528868272.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:52.120Z,1528868272.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:52.511Z,1528868272.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:52.528Z,1528868272.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:55.614Z,1528868275.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:55.632Z,1528868275.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:55.816Z,1528868275.816 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0052.lzma
2018-06-13T05:37:55.853Z,1528868275.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:55.891Z,1528868275.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:56.196Z,1528868276.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:56.230Z,1528868276.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:56.575Z,1528868276.575 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0052.lzma.bak
2018-06-13T05:37:56.575Z,1528868276.575 [DataOverHttps](INFO): SBD MOMSN=8328665
2018-06-13T05:37:56.605Z,1528868276.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:56.639Z,1528868276.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:58.490Z,1528868278.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:58.511Z,1528868278.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:58.621Z,1528868278.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:58.664Z,1528868278.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:59.034Z,1528868279.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:59.052Z,1528868279.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:59.438Z,1528868279.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:59.455Z,1528868279.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:37:59.815Z,1528868279.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:37:59.854Z,1528868279.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:03.013Z,1528868283.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:03.055Z,1528868283.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:03.167Z,1528868283.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:03.211Z,1528868283.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:03.592Z,1528868283.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:03.610Z,1528868283.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:03.997Z,1528868283.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:04.015Z,1528868284.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:04.392Z,1528868284.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:04.410Z,1528868284.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:04.775Z,1528868284.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:04.812Z,1528868284.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:05.175Z,1528868285.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:05.209Z,1528868285.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:05.576Z,1528868285.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:05.607Z,1528868285.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:05.975Z,1528868285.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:06.012Z,1528868286.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:10.534Z,1528868290.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:10.562Z,1528868290.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:10.657Z,1528868290.657 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0053.lzma
2018-06-13T05:38:10.694Z,1528868290.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:10.725Z,1528868290.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:11.100Z,1528868291.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:11.117Z,1528868291.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:11.458Z,1528868291.458 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0053.lzma.bak
2018-06-13T05:38:11.458Z,1528868291.458 [DataOverHttps](INFO): SBD MOMSN=8328667
2018-06-13T05:38:11.504Z,1528868291.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:11.522Z,1528868291.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:13.359Z,1528868293.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:13.384Z,1528868293.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:13.407Z,1528868293.407 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T05:38:13.407Z,1528868293.407 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T05:38:13.407Z,1528868293.407 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T05:38:13.549Z,1528868293.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:13.584Z,1528868293.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:16.725Z,1528868296.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:16.759Z,1528868296.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:16.894Z,1528868296.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:16.931Z,1528868296.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:17.283Z,1528868297.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:17.320Z,1528868297.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:17.680Z,1528868297.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:17.716Z,1528868297.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:18.075Z,1528868298.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:18.111Z,1528868298.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:18.489Z,1528868298.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:18.522Z,1528868298.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:18.901Z,1528868298.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:18.926Z,1528868298.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:19.290Z,1528868299.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:19.336Z,1528868299.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:19.679Z,1528868299.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:19.715Z,1528868299.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:20.079Z,1528868300.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:20.113Z,1528868300.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:20.480Z,1528868300.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:20.518Z,1528868300.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:20.879Z,1528868300.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:20.897Z,1528868300.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:21.294Z,1528868301.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:21.335Z,1528868301.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:21.690Z,1528868301.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:21.712Z,1528868301.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:22.090Z,1528868302.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:22.112Z,1528868302.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:22.485Z,1528868302.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:22.508Z,1528868302.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:22.883Z,1528868302.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:22.939Z,1528868302.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:23.289Z,1528868303.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:23.310Z,1528868303.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:23.693Z,1528868303.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:23.716Z,1528868303.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:24.090Z,1528868304.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:24.108Z,1528868304.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:24.483Z,1528868304.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:24.514Z,1528868304.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:24.886Z,1528868304.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:24.905Z,1528868304.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:25.288Z,1528868305.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:25.320Z,1528868305.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:25.694Z,1528868305.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:25.716Z,1528868305.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:26.094Z,1528868306.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:26.112Z,1528868306.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:26.484Z,1528868306.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:26.538Z,1528868306.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:26.883Z,1528868306.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:26.924Z,1528868306.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:27.294Z,1528868307.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:27.313Z,1528868307.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:27.695Z,1528868307.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:27.713Z,1528868307.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:28.094Z,1528868308.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:28.113Z,1528868308.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:28.486Z,1528868308.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:28.526Z,1528868308.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:28.879Z,1528868308.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:28.906Z,1528868308.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:29.295Z,1528868309.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:29.313Z,1528868309.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:29.702Z,1528868309.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:29.724Z,1528868309.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:30.091Z,1528868310.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:30.120Z,1528868310.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:30.483Z,1528868310.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:30.511Z,1528868310.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:30.879Z,1528868310.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:30.908Z,1528868310.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:31.295Z,1528868311.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:31.314Z,1528868311.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:31.699Z,1528868311.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:31.723Z,1528868311.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:32.100Z,1528868312.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:32.118Z,1528868312.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:32.480Z,1528868312.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:32.515Z,1528868312.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:32.879Z,1528868312.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:32.906Z,1528868312.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:33.300Z,1528868313.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:33.323Z,1528868313.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:33.699Z,1528868313.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:33.725Z,1528868313.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:34.095Z,1528868314.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:34.113Z,1528868314.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:34.480Z,1528868314.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:34.510Z,1528868314.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:34.875Z,1528868314.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:34.911Z,1528868314.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:35.295Z,1528868315.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:35.313Z,1528868315.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:35.697Z,1528868315.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:35.720Z,1528868315.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:36.095Z,1528868316.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:36.113Z,1528868316.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:36.479Z,1528868316.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:36.515Z,1528868316.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:36.880Z,1528868316.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:36.916Z,1528868316.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:37.276Z,1528868317.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:37.313Z,1528868317.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:37.689Z,1528868317.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:37.724Z,1528868317.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:38.101Z,1528868318.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:38.120Z,1528868318.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:38.486Z,1528868318.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:38.512Z,1528868318.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:38.879Z,1528868318.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:38.912Z,1528868318.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:39.280Z,1528868319.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:39.310Z,1528868319.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:39.680Z,1528868319.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:39.698Z,1528868319.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:40.083Z,1528868320.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:40.104Z,1528868320.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:40.493Z,1528868320.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:40.524Z,1528868320.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:40.893Z,1528868320.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:40.911Z,1528868320.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:41.290Z,1528868321.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:41.308Z,1528868321.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:41.690Z,1528868321.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:41.742Z,1528868321.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:42.082Z,1528868322.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:42.210Z,1528868322.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:42.509Z,1528868322.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:42.541Z,1528868322.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:42.907Z,1528868322.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:43.048Z,1528868323.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:43.276Z,1528868323.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:43.392Z,1528868323.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:43.689Z,1528868323.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:43.732Z,1528868323.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:44.097Z,1528868324.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:44.123Z,1528868324.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:44.486Z,1528868324.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:44.519Z,1528868324.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:44.879Z,1528868324.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:44.896Z,1528868324.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:45.279Z,1528868325.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:45.297Z,1528868325.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:45.680Z,1528868325.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:45.697Z,1528868325.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:46.082Z,1528868326.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:46.124Z,1528868326.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:46.493Z,1528868326.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:46.528Z,1528868326.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:46.889Z,1528868326.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:46.907Z,1528868326.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:47.297Z,1528868327.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:47.333Z,1528868327.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:47.683Z,1528868327.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:47.702Z,1528868327.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:48.079Z,1528868328.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:48.113Z,1528868328.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:48.486Z,1528868328.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:48.504Z,1528868328.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:48.888Z,1528868328.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:48.907Z,1528868328.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:49.280Z,1528868329.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:49.325Z,1528868329.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:49.690Z,1528868329.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:49.708Z,1528868329.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:50.094Z,1528868330.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:50.112Z,1528868330.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:50.489Z,1528868330.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:50.514Z,1528868330.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:50.884Z,1528868330.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:50.912Z,1528868330.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:51.286Z,1528868331.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:51.305Z,1528868331.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:51.679Z,1528868331.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:51.706Z,1528868331.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:52.083Z,1528868332.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:52.106Z,1528868332.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:52.493Z,1528868332.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:52.516Z,1528868332.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:52.894Z,1528868332.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:52.914Z,1528868332.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:53.294Z,1528868333.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:53.312Z,1528868333.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:53.687Z,1528868333.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:53.705Z,1528868333.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:54.078Z,1528868334.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:54.110Z,1528868334.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:54.483Z,1528868334.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:54.525Z,1528868334.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:54.886Z,1528868334.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:54.905Z,1528868334.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:55.275Z,1528868335.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:55.311Z,1528868335.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:55.697Z,1528868335.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:55.715Z,1528868335.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:56.099Z,1528868336.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:56.124Z,1528868336.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:56.495Z,1528868336.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:56.513Z,1528868336.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:56.875Z,1528868336.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:56.892Z,1528868336.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:57.275Z,1528868337.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:57.293Z,1528868337.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:57.676Z,1528868337.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:57.717Z,1528868337.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:58.079Z,1528868338.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:58.104Z,1528868338.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:58.494Z,1528868338.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:58.528Z,1528868338.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:58.892Z,1528868338.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:58.910Z,1528868338.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:59.290Z,1528868339.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:59.307Z,1528868339.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:38:59.685Z,1528868339.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:38:59.703Z,1528868339.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:00.084Z,1528868340.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:00.101Z,1528868340.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:00.482Z,1528868340.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:00.516Z,1528868340.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:00.885Z,1528868340.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:00.908Z,1528868340.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:01.284Z,1528868341.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:01.302Z,1528868341.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:01.689Z,1528868341.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:01.707Z,1528868341.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:02.093Z,1528868342.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:02.111Z,1528868342.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:02.490Z,1528868342.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:02.516Z,1528868342.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:02.884Z,1528868342.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:02.902Z,1528868342.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:03.286Z,1528868343.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:03.304Z,1528868343.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:03.679Z,1528868343.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:03.702Z,1528868343.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:04.083Z,1528868344.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:04.105Z,1528868344.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:04.493Z,1528868344.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:04.512Z,1528868344.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:04.890Z,1528868344.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:04.912Z,1528868344.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:05.291Z,1528868345.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:05.316Z,1528868345.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:05.686Z,1528868345.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:05.704Z,1528868345.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:06.079Z,1528868346.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:06.102Z,1528868346.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:06.483Z,1528868346.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:06.505Z,1528868346.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:06.886Z,1528868346.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:06.904Z,1528868346.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:07.286Z,1528868347.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:07.303Z,1528868347.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:07.690Z,1528868347.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:07.707Z,1528868347.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:08.094Z,1528868348.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:08.112Z,1528868348.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:08.490Z,1528868348.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:08.508Z,1528868348.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:08.883Z,1528868348.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:08.905Z,1528868348.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:09.283Z,1528868349.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:09.314Z,1528868349.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:09.686Z,1528868349.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:09.704Z,1528868349.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:10.089Z,1528868350.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:10.107Z,1528868350.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:10.494Z,1528868350.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:10.513Z,1528868350.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:10.894Z,1528868350.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:10.911Z,1528868350.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:11.294Z,1528868351.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:11.312Z,1528868351.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:11.686Z,1528868351.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:11.703Z,1528868351.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:12.086Z,1528868352.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:12.108Z,1528868352.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:12.483Z,1528868352.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:12.505Z,1528868352.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:12.886Z,1528868352.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:12.915Z,1528868352.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:13.279Z,1528868353.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:13.302Z,1528868353.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:13.698Z,1528868353.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:13.716Z,1528868353.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:14.099Z,1528868354.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:14.117Z,1528868354.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:17.202Z,1528868357.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:17.220Z,1528868357.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:17.354Z,1528868357.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:17.400Z,1528868357.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:17.750Z,1528868357.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:17.768Z,1528868357.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:18.149Z,1528868358.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:18.167Z,1528868358.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:18.553Z,1528868358.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:18.571Z,1528868358.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:18.957Z,1528868358.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:18.975Z,1528868358.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:19.354Z,1528868359.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:19.371Z,1528868359.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:19.747Z,1528868359.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:19.780Z,1528868359.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:20.150Z,1528868360.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:20.168Z,1528868360.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:20.545Z,1528868360.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:20.563Z,1528868360.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:20.948Z,1528868360.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:20.980Z,1528868360.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:21.347Z,1528868361.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:21.372Z,1528868361.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:21.759Z,1528868361.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:21.776Z,1528868361.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:22.162Z,1528868362.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:22.180Z,1528868362.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:22.564Z,1528868362.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:22.582Z,1528868362.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:22.944Z,1528868362.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:22.976Z,1528868362.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:23.343Z,1528868363.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:23.379Z,1528868363.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:23.743Z,1528868363.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:23.780Z,1528868363.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:24.139Z,1528868364.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:24.166Z,1528868364.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:24.556Z,1528868364.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:24.574Z,1528868364.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:24.962Z,1528868364.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:24.995Z,1528868364.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:25.359Z,1528868365.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:25.377Z,1528868365.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:25.743Z,1528868365.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:25.779Z,1528868365.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:26.143Z,1528868366.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:26.181Z,1528868366.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:26.543Z,1528868366.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:26.580Z,1528868366.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:26.944Z,1528868366.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:26.977Z,1528868366.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:27.343Z,1528868367.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:27.381Z,1528868367.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:27.760Z,1528868367.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:27.778Z,1528868367.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:28.163Z,1528868368.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:28.180Z,1528868368.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:28.564Z,1528868368.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:28.582Z,1528868368.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:28.943Z,1528868368.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:28.975Z,1528868368.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:29.343Z,1528868369.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:29.376Z,1528868369.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:29.749Z,1528868369.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:29.778Z,1528868369.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:30.139Z,1528868370.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:30.168Z,1528868370.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:30.553Z,1528868370.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:30.580Z,1528868370.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:30.964Z,1528868370.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:30.982Z,1528868370.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:31.354Z,1528868371.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:31.388Z,1528868371.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:31.743Z,1528868371.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:31.780Z,1528868371.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:32.143Z,1528868372.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:32.174Z,1528868372.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:32.544Z,1528868372.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:32.578Z,1528868372.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:32.944Z,1528868372.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:32.962Z,1528868372.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:33.347Z,1528868373.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:33.365Z,1528868373.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:33.754Z,1528868373.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:33.792Z,1528868373.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:34.165Z,1528868374.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:34.198Z,1528868374.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:34.558Z,1528868374.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:34.576Z,1528868374.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:34.948Z,1528868374.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:34.967Z,1528868374.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:35.349Z,1528868375.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:35.367Z,1528868375.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:35.747Z,1528868375.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:35.766Z,1528868375.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:36.142Z,1528868376.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:36.180Z,1528868376.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:36.559Z,1528868376.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:36.578Z,1528868376.578 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:36.578Z,1528868376.578 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2018-06-13T05:39:36.578Z,1528868376.578 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:39:36.580Z,1528868376.580 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:36.580Z,1528868376.580 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45
2018-06-13T05:39:36.580Z,1528868376.580 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:39:36.582Z,1528868376.582 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:36.582Z,1528868376.582 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2018-06-13T05:39:36.582Z,1528868376.582 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:39:36.665Z,1528868376.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:39:36.665Z,1528868376.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:39:36.666Z,1528868376.666 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:39:36.963Z,1528868376.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:37.077Z,1528868377.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:39:37.077Z,1528868377.077 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2018-06-13T05:39:37.078Z,1528868377.078 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:39:37.078Z,1528868377.078 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45
2018-06-13T05:39:37.078Z,1528868377.078 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:39:37.078Z,1528868377.078 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2018-06-13T05:39:37.349Z,1528868377.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:37.377Z,1528868377.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:39:37.378Z,1528868377.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:39:37.378Z,1528868377.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:39:37.379Z,1528868377.379 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:39:37.379Z,1528868377.379 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:39:37.379Z,1528868377.379 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:39:37.380Z,1528868377.380 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:39:37.380Z,1528868377.380 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:39:37.380Z,1528868377.380 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:39:37.751Z,1528868377.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:37.780Z,1528868377.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:39:37.781Z,1528868377.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:38.139Z,1528868378.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:38.156Z,1528868378.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:39:38.165Z,1528868378.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:38.543Z,1528868378.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:38.560Z,1528868378.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:39:38.581Z,1528868378.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:38.944Z,1528868378.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:38.961Z,1528868378.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:39:38.962Z,1528868378.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:39.347Z,1528868379.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:39.364Z,1528868379.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:39:39.365Z,1528868379.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:39.753Z,1528868379.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:39.771Z,1528868379.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:39:39.772Z,1528868379.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:40.157Z,1528868380.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:40.174Z,1528868380.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:39:40.175Z,1528868380.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:40.553Z,1528868380.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:40.575Z,1528868380.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:39:40.576Z,1528868380.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:40.943Z,1528868380.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:40.976Z,1528868380.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:39:40.981Z,1528868380.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:41.349Z,1528868381.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:41.372Z,1528868381.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:39:41.373Z,1528868381.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:41.750Z,1528868381.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:41.767Z,1528868381.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:39:41.768Z,1528868381.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:42.139Z,1528868382.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:42.175Z,1528868382.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:39:42.176Z,1528868382.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:42.559Z,1528868382.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:42.576Z,1528868382.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:39:42.578Z,1528868382.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:42.953Z,1528868382.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:42.981Z,1528868382.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:39:42.982Z,1528868382.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:43.349Z,1528868383.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:43.380Z,1528868383.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:39:43.385Z,1528868383.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:43.743Z,1528868383.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:43.760Z,1528868383.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:39:43.761Z,1528868383.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:44.144Z,1528868384.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:44.161Z,1528868384.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:39:44.162Z,1528868384.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:44.542Z,1528868384.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:44.559Z,1528868384.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:39:44.560Z,1528868384.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:44.947Z,1528868384.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:44.968Z,1528868384.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:39:44.969Z,1528868384.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:45.346Z,1528868385.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:45.363Z,1528868385.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:39:45.363Z,1528868385.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:45.753Z,1528868385.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:45.771Z,1528868385.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:39:45.772Z,1528868385.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:46.158Z,1528868386.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:46.196Z,1528868386.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:39:46.201Z,1528868386.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:46.557Z,1528868386.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:46.579Z,1528868386.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:39:46.580Z,1528868386.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:46.948Z,1528868386.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:46.966Z,1528868386.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:39:46.967Z,1528868386.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:47.346Z,1528868387.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:47.364Z,1528868387.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:39:47.365Z,1528868387.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:47.749Z,1528868387.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:47.766Z,1528868387.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:39:47.767Z,1528868387.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:48.148Z,1528868388.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:48.166Z,1528868388.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:39:48.167Z,1528868388.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:48.554Z,1528868388.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:48.576Z,1528868388.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:39:48.577Z,1528868388.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:48.957Z,1528868388.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:48.974Z,1528868388.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:39:48.975Z,1528868388.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:49.358Z,1528868389.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:49.376Z,1528868389.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T05:39:49.377Z,1528868389.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:49.749Z,1528868389.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:49.766Z,1528868389.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T05:39:49.767Z,1528868389.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:50.149Z,1528868390.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:50.166Z,1528868390.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T05:39:50.167Z,1528868390.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:50.549Z,1528868390.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:50.566Z,1528868390.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:39:50.567Z,1528868390.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:50.948Z,1528868390.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:50.970Z,1528868390.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:39:50.971Z,1528868390.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:51.339Z,1528868391.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:51.413Z,1528868391.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:39:51.414Z,1528868391.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:51.759Z,1528868391.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:51.777Z,1528868391.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:39:51.778Z,1528868391.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:52.161Z,1528868392.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:52.179Z,1528868392.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:39:52.180Z,1528868392.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:52.560Z,1528868392.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:52.577Z,1528868392.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:39:52.578Z,1528868392.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:52.950Z,1528868392.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:52.974Z,1528868392.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:39:52.975Z,1528868392.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:53.347Z,1528868393.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:53.369Z,1528868393.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:39:53.370Z,1528868393.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:53.750Z,1528868393.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:53.767Z,1528868393.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:39:53.768Z,1528868393.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:54.149Z,1528868394.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:54.166Z,1528868394.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:39:54.167Z,1528868394.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:54.555Z,1528868394.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:54.573Z,1528868394.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:39:54.574Z,1528868394.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:54.963Z,1528868394.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:54.981Z,1528868394.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:39:54.982Z,1528868394.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:55.349Z,1528868395.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:55.384Z,1528868395.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:39:55.385Z,1528868395.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:55.744Z,1528868395.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:55.777Z,1528868395.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:39:55.778Z,1528868395.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:56.143Z,1528868396.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:56.160Z,1528868396.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:39:56.181Z,1528868396.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:56.543Z,1528868396.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:56.560Z,1528868396.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T05:39:56.561Z,1528868396.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:56.948Z,1528868396.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:56.965Z,1528868396.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:57.345Z,1528868397.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:57.370Z,1528868397.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:57.758Z,1528868397.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:57.794Z,1528868397.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:58.157Z,1528868398.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:58.191Z,1528868398.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:58.557Z,1528868398.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:58.574Z,1528868398.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:58.946Z,1528868398.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:58.964Z,1528868398.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:59.350Z,1528868399.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:59.368Z,1528868399.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:39:59.746Z,1528868399.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:39:59.764Z,1528868399.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:00.148Z,1528868400.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:00.172Z,1528868400.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:00.554Z,1528868400.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:00.572Z,1528868400.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:00.957Z,1528868400.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:00.974Z,1528868400.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:01.354Z,1528868401.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:01.373Z,1528868401.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:01.748Z,1528868401.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:01.765Z,1528868401.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:02.142Z,1528868402.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:02.167Z,1528868402.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:02.548Z,1528868402.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:02.566Z,1528868402.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:02.948Z,1528868402.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:02.966Z,1528868402.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:03.349Z,1528868403.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:03.367Z,1528868403.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:03.757Z,1528868403.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:03.775Z,1528868403.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:04.157Z,1528868404.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:04.175Z,1528868404.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:04.558Z,1528868404.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:04.576Z,1528868404.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:04.948Z,1528868404.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:04.972Z,1528868404.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:05.348Z,1528868405.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:05.366Z,1528868405.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:05.748Z,1528868405.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:05.777Z,1528868405.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:06.149Z,1528868406.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:06.166Z,1528868406.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:06.558Z,1528868406.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:06.577Z,1528868406.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:06.960Z,1528868406.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:06.984Z,1528868406.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:07.361Z,1528868407.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:07.379Z,1528868407.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:07.748Z,1528868407.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:07.766Z,1528868407.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:08.147Z,1528868408.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:08.171Z,1528868408.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:08.549Z,1528868408.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:08.566Z,1528868408.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:08.947Z,1528868408.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:08.977Z,1528868408.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:09.344Z,1528868409.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:09.371Z,1528868409.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:09.758Z,1528868409.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:09.780Z,1528868409.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:10.160Z,1528868410.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:10.184Z,1528868410.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:10.564Z,1528868410.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:10.588Z,1528868410.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:10.943Z,1528868410.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:10.976Z,1528868410.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:11.343Z,1528868411.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:11.380Z,1528868411.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:11.744Z,1528868411.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:11.772Z,1528868411.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:12.144Z,1528868412.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:12.180Z,1528868412.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:12.560Z,1528868412.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:12.578Z,1528868412.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:12.966Z,1528868412.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:12.983Z,1528868412.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:13.364Z,1528868413.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:13.382Z,1528868413.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:13.743Z,1528868413.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:13.778Z,1528868413.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:14.149Z,1528868414.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:14.180Z,1528868414.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:17.270Z,1528868417.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:17.288Z,1528868417.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:17.400Z,1528868417.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:17.452Z,1528868417.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:17.825Z,1528868417.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:17.843Z,1528868417.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:18.218Z,1528868418.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:18.262Z,1528868418.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:18.620Z,1528868418.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:18.638Z,1528868418.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:19.009Z,1528868419.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:19.039Z,1528868419.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:19.400Z,1528868419.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:19.429Z,1528868419.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:19.801Z,1528868419.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:19.835Z,1528868419.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:20.201Z,1528868420.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:20.243Z,1528868420.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:20.607Z,1528868420.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:20.635Z,1528868420.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:21.023Z,1528868421.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:21.041Z,1528868421.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:21.422Z,1528868421.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:21.452Z,1528868421.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:21.795Z,1528868421.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:21.833Z,1528868421.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:22.199Z,1528868422.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:22.239Z,1528868422.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:22.600Z,1528868422.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:22.619Z,1528868422.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:22.998Z,1528868422.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:23.020Z,1528868423.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:23.402Z,1528868423.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:23.420Z,1528868423.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:23.814Z,1528868423.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:23.852Z,1528868423.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:24.210Z,1528868424.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:24.245Z,1528868424.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:24.614Z,1528868424.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:24.659Z,1528868424.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:25.004Z,1528868425.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:25.022Z,1528868425.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:25.402Z,1528868425.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:25.420Z,1528868425.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:25.803Z,1528868425.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:25.821Z,1528868425.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:26.205Z,1528868426.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:26.223Z,1528868426.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:26.606Z,1528868426.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:26.624Z,1528868426.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:27.014Z,1528868427.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:27.052Z,1528868427.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:27.414Z,1528868427.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:27.452Z,1528868427.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:27.798Z,1528868427.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:27.832Z,1528868427.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:28.206Z,1528868428.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:28.229Z,1528868428.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:28.606Z,1528868428.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:28.624Z,1528868428.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:29.005Z,1528868429.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:29.024Z,1528868429.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:29.404Z,1528868429.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:29.422Z,1528868429.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:29.814Z,1528868429.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:29.836Z,1528868429.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:30.210Z,1528868430.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:30.232Z,1528868430.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:30.610Z,1528868430.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:30.628Z,1528868430.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:31.004Z,1528868431.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:31.034Z,1528868431.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:31.406Z,1528868431.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:31.424Z,1528868431.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:31.807Z,1528868431.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:31.825Z,1528868431.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:32.206Z,1528868432.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:32.224Z,1528868432.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:32.611Z,1528868432.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:32.629Z,1528868432.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:33.014Z,1528868433.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:33.036Z,1528868433.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:33.414Z,1528868433.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:33.436Z,1528868433.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:33.802Z,1528868433.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:33.820Z,1528868433.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:34.205Z,1528868434.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:34.271Z,1528868434.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:34.607Z,1528868434.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:34.626Z,1528868434.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:35.006Z,1528868435.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:35.024Z,1528868435.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:35.405Z,1528868435.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:35.423Z,1528868435.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:35.814Z,1528868435.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:35.832Z,1528868435.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:36.211Z,1528868436.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:36.228Z,1528868436.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:36.614Z,1528868436.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:36.632Z,1528868436.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:37.002Z,1528868437.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:37.020Z,1528868437.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:37.399Z,1528868437.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:37.423Z,1528868437.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:37.803Z,1528868437.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:37.835Z,1528868437.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:38.206Z,1528868438.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:38.224Z,1528868438.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:38.611Z,1528868438.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:38.629Z,1528868438.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:39.014Z,1528868439.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:39.036Z,1528868439.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:39.411Z,1528868439.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:39.428Z,1528868439.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:39.799Z,1528868439.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:39.823Z,1528868439.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:40.204Z,1528868440.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:40.231Z,1528868440.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:40.601Z,1528868440.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:40.625Z,1528868440.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:40.999Z,1528868440.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:41.023Z,1528868441.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:41.409Z,1528868441.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:41.427Z,1528868441.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:41.816Z,1528868441.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:41.834Z,1528868441.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:42.215Z,1528868442.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:42.234Z,1528868442.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:42.614Z,1528868442.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:42.632Z,1528868442.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:43.006Z,1528868443.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:43.024Z,1528868443.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:43.399Z,1528868443.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:43.425Z,1528868443.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:43.798Z,1528868443.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:43.832Z,1528868443.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:44.202Z,1528868444.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:44.233Z,1528868444.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:44.614Z,1528868444.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:44.633Z,1528868444.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:45.015Z,1528868445.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:45.040Z,1528868445.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:45.416Z,1528868445.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:45.434Z,1528868445.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:45.799Z,1528868445.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:45.823Z,1528868445.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:46.204Z,1528868446.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:46.227Z,1528868446.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:46.602Z,1528868446.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:46.620Z,1528868446.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:46.999Z,1528868446.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:47.024Z,1528868447.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:47.405Z,1528868447.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:47.423Z,1528868447.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:47.815Z,1528868447.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:47.833Z,1528868447.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:48.216Z,1528868448.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:48.234Z,1528868448.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:48.614Z,1528868448.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:48.632Z,1528868448.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:49.003Z,1528868449.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:49.020Z,1528868449.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:49.406Z,1528868449.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:49.424Z,1528868449.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:49.806Z,1528868449.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:49.824Z,1528868449.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:50.207Z,1528868450.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:50.225Z,1528868450.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:50.612Z,1528868450.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:50.636Z,1528868450.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:51.018Z,1528868451.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:51.035Z,1528868451.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:51.416Z,1528868451.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:51.433Z,1528868451.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:51.799Z,1528868451.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:51.823Z,1528868451.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:52.198Z,1528868452.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:52.223Z,1528868452.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:52.603Z,1528868452.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:52.633Z,1528868452.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:52.996Z,1528868452.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:53.026Z,1528868453.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:53.406Z,1528868453.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:53.423Z,1528868453.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:53.817Z,1528868453.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:53.834Z,1528868453.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:54.217Z,1528868454.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:54.235Z,1528868454.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:54.616Z,1528868454.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:54.640Z,1528868454.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:55.007Z,1528868455.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:55.025Z,1528868455.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:55.395Z,1528868455.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:55.436Z,1528868455.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:55.800Z,1528868455.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:55.834Z,1528868455.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:56.199Z,1528868456.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:56.229Z,1528868456.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:56.622Z,1528868456.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:56.640Z,1528868456.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:57.014Z,1528868457.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:57.039Z,1528868457.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:57.422Z,1528868457.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:57.439Z,1528868457.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:57.796Z,1528868457.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:57.832Z,1528868457.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:58.204Z,1528868458.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:58.240Z,1528868458.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:58.595Z,1528868458.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:58.633Z,1528868458.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:58.996Z,1528868458.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:59.035Z,1528868459.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:59.400Z,1528868459.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:59.436Z,1528868459.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:40:59.812Z,1528868459.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:40:59.848Z,1528868459.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:00.211Z,1528868460.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:00.254Z,1528868460.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:00.611Z,1528868460.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:00.640Z,1528868460.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:00.995Z,1528868460.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:01.034Z,1528868461.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:01.395Z,1528868461.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:01.441Z,1528868461.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:01.800Z,1528868461.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:01.820Z,1528868461.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:02.204Z,1528868462.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:02.222Z,1528868462.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:02.614Z,1528868462.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:02.652Z,1528868462.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:03.014Z,1528868463.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:03.052Z,1528868463.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:03.414Z,1528868463.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:03.431Z,1528868463.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:03.804Z,1528868463.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:03.822Z,1528868463.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:04.205Z,1528868464.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:04.222Z,1528868464.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:04.603Z,1528868464.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:04.628Z,1528868464.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:05.005Z,1528868465.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:05.023Z,1528868465.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:05.405Z,1528868465.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:05.423Z,1528868465.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:05.810Z,1528868465.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:05.827Z,1528868465.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:06.211Z,1528868466.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:06.228Z,1528868466.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:06.610Z,1528868466.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:06.628Z,1528868466.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:07.006Z,1528868467.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:07.023Z,1528868467.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:07.399Z,1528868467.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:07.423Z,1528868467.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:07.804Z,1528868467.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:07.835Z,1528868467.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:08.202Z,1528868468.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:08.220Z,1528868468.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:08.610Z,1528868468.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:08.629Z,1528868468.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:09.014Z,1528868469.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:09.032Z,1528868469.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:09.414Z,1528868469.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:09.431Z,1528868469.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:09.799Z,1528868469.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:09.832Z,1528868469.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:10.206Z,1528868470.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:10.223Z,1528868470.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:10.602Z,1528868470.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:10.620Z,1528868470.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:10.999Z,1528868470.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:11.023Z,1528868471.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:11.404Z,1528868471.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:11.430Z,1528868471.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:11.814Z,1528868471.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:11.832Z,1528868471.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:12.214Z,1528868472.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:12.232Z,1528868472.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:12.610Z,1528868472.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:12.632Z,1528868472.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:13.002Z,1528868473.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:13.024Z,1528868473.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:13.399Z,1528868473.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:13.432Z,1528868473.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:13.809Z,1528868473.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:13.827Z,1528868473.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:14.207Z,1528868474.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:14.232Z,1528868474.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:14.610Z,1528868474.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:14.628Z,1528868474.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:15.014Z,1528868475.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:15.032Z,1528868475.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:15.414Z,1528868475.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:15.432Z,1528868475.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:15.805Z,1528868475.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:15.823Z,1528868475.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:16.203Z,1528868476.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:16.236Z,1528868476.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:16.606Z,1528868476.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:16.624Z,1528868476.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:17.007Z,1528868477.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:17.025Z,1528868477.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:20.140Z,1528868480.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:20.320Z,1528868480.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:20.710Z,1528868480.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:21.085Z,1528868481.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:21.112Z,1528868481.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:21.470Z,1528868481.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:21.489Z,1528868481.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:21.871Z,1528868481.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:21.888Z,1528868481.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:22.288Z,1528868482.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:22.713Z,1528868482.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:23.118Z,1528868483.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:23.481Z,1528868483.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:23.499Z,1528868483.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:23.870Z,1528868483.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:23.888Z,1528868483.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:24.271Z,1528868484.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:24.289Z,1528868484.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:24.669Z,1528868484.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:24.687Z,1528868484.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:25.071Z,1528868485.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:25.088Z,1528868485.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:25.470Z,1528868485.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:25.487Z,1528868485.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:25.881Z,1528868485.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:25.899Z,1528868485.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:26.282Z,1528868486.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:26.300Z,1528868486.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:26.677Z,1528868486.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:26.695Z,1528868486.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:27.072Z,1528868487.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:27.090Z,1528868487.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:27.472Z,1528868487.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:27.489Z,1528868487.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:27.872Z,1528868487.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:27.892Z,1528868487.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:28.272Z,1528868488.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:28.289Z,1528868488.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:28.678Z,1528868488.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:28.695Z,1528868488.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:29.077Z,1528868489.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:29.095Z,1528868489.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:29.477Z,1528868489.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:29.495Z,1528868489.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:29.872Z,1528868489.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:29.890Z,1528868489.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:30.270Z,1528868490.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:41:30.292Z,1528868490.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:30.689Z,1528868490.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:31.090Z,1528868491.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:31.489Z,1528868491.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:31.899Z,1528868491.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:32.299Z,1528868492.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:32.695Z,1528868492.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:33.092Z,1528868493.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:33.496Z,1528868493.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:33.897Z,1528868493.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:34.298Z,1528868494.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:34.696Z,1528868494.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:35.099Z,1528868495.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:35.499Z,1528868495.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:35.891Z,1528868495.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:36.289Z,1528868496.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:36.691Z,1528868496.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:37.091Z,1528868497.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:37.487Z,1528868497.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:37.900Z,1528868497.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:38.299Z,1528868498.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:38.694Z,1528868498.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:39.091Z,1528868499.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:39.490Z,1528868499.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:39.893Z,1528868499.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:40.292Z,1528868500.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:40.699Z,1528868500.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:41.098Z,1528868501.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:41.499Z,1528868501.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:41.891Z,1528868501.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:42.291Z,1528868502.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:42.692Z,1528868502.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:43.095Z,1528868503.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:43.491Z,1528868503.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:43.899Z,1528868503.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:44.297Z,1528868504.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:44.698Z,1528868504.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:45.092Z,1528868505.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:45.492Z,1528868505.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:45.902Z,1528868505.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:46.299Z,1528868506.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:46.701Z,1528868506.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:47.108Z,1528868507.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:47.508Z,1528868507.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:47.888Z,1528868507.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:48.296Z,1528868508.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:48.691Z,1528868508.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:49.091Z,1528868509.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:49.492Z,1528868509.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:49.904Z,1528868509.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:50.304Z,1528868510.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:50.699Z,1528868510.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:51.091Z,1528868511.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:51.490Z,1528868511.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:51.891Z,1528868511.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:52.304Z,1528868512.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:52.701Z,1528868512.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:53.108Z,1528868513.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:53.505Z,1528868513.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:53.888Z,1528868513.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:54.291Z,1528868514.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:54.696Z,1528868514.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:55.091Z,1528868515.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:55.491Z,1528868515.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:55.905Z,1528868515.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:56.305Z,1528868516.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:56.704Z,1528868516.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:57.093Z,1528868517.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:57.490Z,1528868517.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:57.893Z,1528868517.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:58.294Z,1528868518.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:58.701Z,1528868518.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:59.104Z,1528868519.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:59.508Z,1528868519.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:41:59.888Z,1528868519.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:00.292Z,1528868520.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:00.691Z,1528868520.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:01.088Z,1528868521.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:01.492Z,1528868521.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:01.904Z,1528868521.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:02.308Z,1528868522.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:02.704Z,1528868522.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:03.091Z,1528868523.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:03.490Z,1528868523.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:03.894Z,1528868523.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:04.294Z,1528868524.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:04.697Z,1528868524.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:05.103Z,1528868525.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:05.505Z,1528868525.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:05.889Z,1528868525.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:06.292Z,1528868526.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:06.695Z,1528868526.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:07.091Z,1528868527.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:07.490Z,1528868527.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:07.904Z,1528868527.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:08.360Z,1528868528.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:08.702Z,1528868528.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:09.105Z,1528868529.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:09.488Z,1528868529.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:09.893Z,1528868529.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:10.294Z,1528868530.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:10.712Z,1528868530.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:11.111Z,1528868531.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:11.506Z,1528868531.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:11.893Z,1528868531.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:12.292Z,1528868532.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:12.712Z,1528868532.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:13.101Z,1528868533.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:13.501Z,1528868533.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:13.898Z,1528868533.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:14.292Z,1528868534.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:17.448Z,1528868537.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:17.631Z,1528868537.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:18.002Z,1528868538.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:18.395Z,1528868538.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:18.793Z,1528868538.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:19.193Z,1528868539.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:19.595Z,1528868539.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:19.997Z,1528868539.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:20.399Z,1528868540.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:20.803Z,1528868540.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:21.192Z,1528868541.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:21.597Z,1528868541.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:22.001Z,1528868542.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:22.400Z,1528868542.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:22.807Z,1528868542.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:23.204Z,1528868543.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:23.603Z,1528868543.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:23.988Z,1528868543.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:24.388Z,1528868544.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:24.781Z,1528868544.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:25.188Z,1528868545.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:25.585Z,1528868545.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:25.987Z,1528868545.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:26.412Z,1528868546.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:26.811Z,1528868546.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:27.184Z,1528868547.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:27.586Z,1528868547.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:27.985Z,1528868547.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:28.382Z,1528868548.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:28.815Z,1528868548.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:29.215Z,1528868549.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:29.592Z,1528868549.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:29.987Z,1528868549.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:30.396Z,1528868550.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:30.787Z,1528868550.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:31.190Z,1528868551.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:31.596Z,1528868551.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:31.993Z,1528868551.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:32.400Z,1528868552.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:32.793Z,1528868552.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:33.188Z,1528868553.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:33.599Z,1528868553.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:33.985Z,1528868553.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:34.388Z,1528868554.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:34.804Z,1528868554.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:35.200Z,1528868555.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:35.596Z,1528868555.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:35.988Z,1528868555.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:36.388Z,1528868556.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:36.792Z,1528868556.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:37.190Z,1528868557.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:37.585Z,1528868557.585 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:37.585Z,1528868557.585 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2018-06-13T05:42:37.585Z,1528868557.585 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:42:37.587Z,1528868557.587 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:37.587Z,1528868557.587 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46
2018-06-13T05:42:37.587Z,1528868557.587 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:42:37.589Z,1528868557.589 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:37.589Z,1528868557.589 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2018-06-13T05:42:37.589Z,1528868557.589 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:42:37.669Z,1528868557.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:42:37.669Z,1528868557.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:42:37.670Z,1528868557.670 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:42:38.074Z,1528868558.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:42:38.074Z,1528868558.074 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2018-06-13T05:42:38.075Z,1528868558.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:42:38.075Z,1528868558.075 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46
2018-06-13T05:42:38.075Z,1528868558.075 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:42:38.075Z,1528868558.075 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2018-06-13T05:42:38.399Z,1528868558.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:42:38.400Z,1528868558.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:42:38.400Z,1528868558.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:42:38.401Z,1528868558.401 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:42:38.401Z,1528868558.401 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:42:38.401Z,1528868558.401 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:42:38.402Z,1528868558.402 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:42:38.402Z,1528868558.402 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:42:38.403Z,1528868558.403 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:42:38.807Z,1528868558.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:42:38.808Z,1528868558.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:39.201Z,1528868559.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:42:39.202Z,1528868559.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:39.579Z,1528868559.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:42:39.580Z,1528868559.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:39.980Z,1528868559.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:42:39.981Z,1528868559.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:40.376Z,1528868560.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:42:40.377Z,1528868560.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:40.802Z,1528868560.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:42:40.803Z,1528868560.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:41.208Z,1528868561.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:42:41.209Z,1528868561.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:41.606Z,1528868561.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:42:41.607Z,1528868561.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:41.988Z,1528868561.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:42:41.989Z,1528868561.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:42.382Z,1528868562.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:42:42.383Z,1528868562.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:42.779Z,1528868562.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:42:42.780Z,1528868562.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:43.182Z,1528868563.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:42:43.183Z,1528868563.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:43.582Z,1528868563.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:42:43.583Z,1528868563.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:43.991Z,1528868563.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:42:43.992Z,1528868563.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:44.410Z,1528868564.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:42:44.411Z,1528868564.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:44.790Z,1528868564.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:42:44.791Z,1528868564.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:45.180Z,1528868565.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:42:45.182Z,1528868565.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:45.583Z,1528868565.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:42:45.584Z,1528868565.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:45.983Z,1528868565.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:42:45.984Z,1528868565.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:46.381Z,1528868566.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:42:46.382Z,1528868566.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:46.794Z,1528868566.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:42:46.795Z,1528868566.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:47.194Z,1528868567.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:42:47.195Z,1528868567.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:47.591Z,1528868567.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:42:47.592Z,1528868567.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:47.984Z,1528868567.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:42:47.986Z,1528868567.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:48.385Z,1528868568.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:42:48.386Z,1528868568.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:48.786Z,1528868568.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:42:48.787Z,1528868568.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:49.185Z,1528868569.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:42:49.186Z,1528868569.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:49.585Z,1528868569.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:42:49.586Z,1528868569.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:49.991Z,1528868569.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:42:49.992Z,1528868569.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:50.394Z,1528868570.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T05:42:50.395Z,1528868570.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:50.799Z,1528868570.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T05:42:50.800Z,1528868570.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:51.185Z,1528868571.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T05:42:51.186Z,1528868571.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:51.587Z,1528868571.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:42:51.588Z,1528868571.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:51.986Z,1528868571.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:42:51.987Z,1528868571.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:52.384Z,1528868572.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:42:52.386Z,1528868572.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:52.791Z,1528868572.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:42:52.791Z,1528868572.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:53.194Z,1528868573.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:42:53.194Z,1528868573.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:53.591Z,1528868573.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:42:53.592Z,1528868573.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:53.984Z,1528868573.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:42:53.986Z,1528868573.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:54.385Z,1528868574.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:42:54.386Z,1528868574.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:54.786Z,1528868574.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:42:54.786Z,1528868574.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:55.185Z,1528868575.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:42:55.186Z,1528868575.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:55.586Z,1528868575.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:42:55.587Z,1528868575.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:55.991Z,1528868575.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:42:55.992Z,1528868575.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:56.395Z,1528868576.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:42:56.396Z,1528868576.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:56.794Z,1528868576.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:42:56.795Z,1528868576.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:57.185Z,1528868577.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:42:57.186Z,1528868577.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:57.593Z,1528868577.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:57.989Z,1528868577.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:58.386Z,1528868578.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:58.791Z,1528868578.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:59.200Z,1528868579.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:59.595Z,1528868579.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:42:59.988Z,1528868579.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:00.392Z,1528868580.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:00.788Z,1528868580.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:01.186Z,1528868581.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:01.582Z,1528868581.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:01.991Z,1528868581.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:02.400Z,1528868582.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:02.795Z,1528868582.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:03.188Z,1528868583.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:03.585Z,1528868583.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:03.989Z,1528868583.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:04.385Z,1528868584.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:04.791Z,1528868584.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:05.194Z,1528868585.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:05.591Z,1528868585.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:05.986Z,1528868585.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:06.387Z,1528868586.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:06.786Z,1528868586.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:07.189Z,1528868587.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:07.587Z,1528868587.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:07.991Z,1528868587.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:08.394Z,1528868588.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:08.795Z,1528868588.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:09.183Z,1528868589.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:09.592Z,1528868589.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:09.996Z,1528868589.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:10.387Z,1528868590.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:10.791Z,1528868590.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:11.195Z,1528868591.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:11.596Z,1528868591.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:11.990Z,1528868591.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:12.387Z,1528868592.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:12.796Z,1528868592.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:13.195Z,1528868593.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:13.600Z,1528868593.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:13.626Z,1528868593.626 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T05:43:13.626Z,1528868593.626 [Default:CheckIn:C.Wait] Stopped
2018-06-13T05:43:13.626Z,1528868593.626 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T05:43:13.627Z,1528868593.627 [Default:CheckIn:D] Running Loop=1
2018-06-13T05:43:13.989Z,1528868593.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:13.992Z,1528868593.992 [Default:CheckIn:D] Stopped
2018-06-13T05:43:13.992Z,1528868593.992 [Default:CheckIn:E] Running Loop=1
2018-06-13T05:43:14.391Z,1528868594.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:14.394Z,1528868594.394 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 136.009115 min 
2018-06-13T05:43:14.394Z,1528868594.394 [Default:CheckIn:E] Stopped
2018-06-13T05:43:14.394Z,1528868594.394 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T05:43:14.395Z,1528868594.395 [Default:CheckIn] Stopped
2018-06-13T05:43:14.395Z,1528868594.395 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T05:43:14.395Z,1528868594.395 [Default:CheckIn](INFO): Running loop #14
2018-06-13T05:43:14.395Z,1528868594.395 [Default:CheckIn] Running Loop=14
2018-06-13T05:43:14.395Z,1528868594.395 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T05:43:14.395Z,1528868594.395 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T05:43:17.503Z,1528868597.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:17.682Z,1528868597.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:18.088Z,1528868598.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:18.484Z,1528868598.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:18.858Z,1528868598.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:19.271Z,1528868599.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:19.690Z,1528868599.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:20.087Z,1528868600.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:20.488Z,1528868600.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:20.892Z,1528868600.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:21.256Z,1528868601.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:21.660Z,1528868601.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:22.080Z,1528868602.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:22.463Z,1528868602.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:22.877Z,1528868602.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:23.275Z,1528868603.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:23.671Z,1528868603.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:24.068Z,1528868604.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:24.467Z,1528868604.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:24.864Z,1528868604.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:25.267Z,1528868605.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:25.678Z,1528868605.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:26.083Z,1528868606.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:26.475Z,1528868606.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:26.875Z,1528868606.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:27.271Z,1528868607.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:27.669Z,1528868607.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:28.068Z,1528868608.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:28.466Z,1528868608.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:28.880Z,1528868608.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:29.276Z,1528868609.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:29.674Z,1528868609.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:30.068Z,1528868610.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:30.467Z,1528868610.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:30.871Z,1528868610.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:31.267Z,1528868611.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:31.669Z,1528868611.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:32.076Z,1528868612.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:32.479Z,1528868612.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:32.880Z,1528868612.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:33.266Z,1528868613.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:33.672Z,1528868613.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:34.068Z,1528868614.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:34.472Z,1528868614.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:34.880Z,1528868614.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:35.284Z,1528868615.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:35.686Z,1528868615.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:36.066Z,1528868616.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:36.471Z,1528868616.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:36.864Z,1528868616.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:37.272Z,1528868617.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:37.674Z,1528868617.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:38.075Z,1528868618.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:38.481Z,1528868618.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:38.882Z,1528868618.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:39.274Z,1528868619.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:39.668Z,1528868619.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:40.070Z,1528868620.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:40.470Z,1528868620.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:40.877Z,1528868620.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:41.282Z,1528868621.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:41.673Z,1528868621.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:42.068Z,1528868622.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:42.471Z,1528868622.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:42.868Z,1528868622.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:43.280Z,1528868623.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:43.676Z,1528868623.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:44.075Z,1528868624.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:44.480Z,1528868624.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:44.895Z,1528868624.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:45.280Z,1528868625.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:45.676Z,1528868625.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:46.081Z,1528868626.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:46.460Z,1528868626.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:46.886Z,1528868626.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:47.285Z,1528868627.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:47.686Z,1528868627.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:48.060Z,1528868628.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:48.461Z,1528868628.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:48.860Z,1528868628.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:49.292Z,1528868629.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:49.664Z,1528868629.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:50.071Z,1528868630.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:50.490Z,1528868630.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:50.875Z,1528868630.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:51.265Z,1528868631.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:51.666Z,1528868631.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:52.072Z,1528868632.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:52.463Z,1528868632.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:52.871Z,1528868632.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:53.275Z,1528868633.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:53.669Z,1528868633.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:54.067Z,1528868634.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:54.468Z,1528868634.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:54.868Z,1528868634.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:55.268Z,1528868635.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:55.667Z,1528868635.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:56.071Z,1528868636.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:56.475Z,1528868636.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:56.871Z,1528868636.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:57.307Z,1528868637.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:57.669Z,1528868637.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:58.070Z,1528868638.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:58.472Z,1528868638.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:58.880Z,1528868638.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:59.263Z,1528868639.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:43:59.297Z,1528868639.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:43:59.654Z,1528868639.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:43:59.684Z,1528868639.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:00.044Z,1528868640.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:00.077Z,1528868640.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:00.443Z,1528868640.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:00.480Z,1528868640.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:00.860Z,1528868640.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:00.879Z,1528868640.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:01.264Z,1528868641.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:01.282Z,1528868641.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:01.663Z,1528868641.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:01.688Z,1528868641.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:02.039Z,1528868642.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:02.067Z,1528868642.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:02.443Z,1528868642.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:02.470Z,1528868642.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:02.843Z,1528868642.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:02.878Z,1528868642.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:03.244Z,1528868643.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:03.276Z,1528868643.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:03.644Z,1528868643.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:03.671Z,1528868643.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:04.064Z,1528868644.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:04.082Z,1528868644.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:04.459Z,1528868644.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:04.477Z,1528868644.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:04.858Z,1528868644.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:04.880Z,1528868644.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:05.243Z,1528868645.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:05.272Z,1528868645.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:05.643Z,1528868645.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:05.671Z,1528868645.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:06.044Z,1528868646.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:06.076Z,1528868646.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:06.447Z,1528868646.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:06.477Z,1528868646.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:06.859Z,1528868646.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:06.877Z,1528868646.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:07.263Z,1528868647.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:07.281Z,1528868647.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:07.664Z,1528868647.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:07.683Z,1528868647.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:08.044Z,1528868648.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:08.071Z,1528868648.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:08.444Z,1528868648.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:08.471Z,1528868648.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:08.864Z,1528868648.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:08.882Z,1528868648.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:09.259Z,1528868649.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:09.277Z,1528868649.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:09.658Z,1528868649.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:09.688Z,1528868649.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:10.044Z,1528868650.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:10.084Z,1528868650.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:10.439Z,1528868650.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:10.476Z,1528868650.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:10.857Z,1528868650.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:10.889Z,1528868650.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:11.264Z,1528868651.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:11.282Z,1528868651.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:11.659Z,1528868651.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:11.677Z,1528868651.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:12.044Z,1528868652.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:12.074Z,1528868652.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:12.443Z,1528868652.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:12.477Z,1528868652.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:12.859Z,1528868652.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:12.877Z,1528868652.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:13.263Z,1528868653.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:13.281Z,1528868653.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:13.664Z,1528868653.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:13.682Z,1528868653.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:14.044Z,1528868654.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:14.079Z,1528868654.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:14.447Z,1528868654.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:14.474Z,1528868654.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:14.868Z,1528868654.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:14.886Z,1528868654.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:15.268Z,1528868655.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:15.286Z,1528868655.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:15.659Z,1528868655.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:15.677Z,1528868655.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:18.775Z,1528868658.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:18.793Z,1528868658.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:18.891Z,1528868658.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:18.935Z,1528868658.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:19.316Z,1528868659.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:19.340Z,1528868659.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:19.720Z,1528868659.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:19.738Z,1528868659.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:20.111Z,1528868660.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:20.129Z,1528868660.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:20.495Z,1528868660.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:20.531Z,1528868660.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:20.895Z,1528868660.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:20.929Z,1528868660.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:21.292Z,1528868661.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:21.326Z,1528868661.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:21.695Z,1528868661.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:21.728Z,1528868661.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:22.109Z,1528868662.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:22.148Z,1528868662.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:22.505Z,1528868662.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:22.533Z,1528868662.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:22.905Z,1528868662.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:22.932Z,1528868662.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:23.295Z,1528868663.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:23.330Z,1528868663.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:23.691Z,1528868663.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:23.708Z,1528868663.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:24.095Z,1528868664.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:24.113Z,1528868664.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:24.497Z,1528868664.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:24.515Z,1528868664.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:24.909Z,1528868664.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:24.943Z,1528868664.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:25.313Z,1528868665.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:25.342Z,1528868665.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:25.713Z,1528868665.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:25.742Z,1528868665.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:26.099Z,1528868666.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:26.117Z,1528868666.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:26.498Z,1528868666.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:26.515Z,1528868666.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:26.897Z,1528868666.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:26.915Z,1528868666.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:27.294Z,1528868667.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:27.316Z,1528868667.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:27.698Z,1528868667.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:27.715Z,1528868667.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:28.110Z,1528868668.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:28.144Z,1528868668.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:28.509Z,1528868668.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:28.542Z,1528868668.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:28.909Z,1528868668.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:28.942Z,1528868668.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:29.298Z,1528868669.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:29.316Z,1528868669.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:29.694Z,1528868669.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:29.712Z,1528868669.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:30.097Z,1528868670.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:30.115Z,1528868670.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:30.498Z,1528868670.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:30.516Z,1528868670.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:30.905Z,1528868670.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:30.923Z,1528868670.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:31.309Z,1528868671.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:31.341Z,1528868671.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:31.709Z,1528868671.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:31.727Z,1528868671.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:32.099Z,1528868672.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:32.116Z,1528868672.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:32.499Z,1528868672.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:32.516Z,1528868672.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:32.902Z,1528868672.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:32.919Z,1528868672.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:33.297Z,1528868673.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:33.315Z,1528868673.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:33.700Z,1528868673.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:33.718Z,1528868673.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:34.109Z,1528868674.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:34.127Z,1528868674.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:34.505Z,1528868674.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:34.523Z,1528868674.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:34.905Z,1528868674.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:34.924Z,1528868674.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:35.301Z,1528868675.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:35.319Z,1528868675.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:35.697Z,1528868675.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:35.715Z,1528868675.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:36.100Z,1528868676.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:36.120Z,1528868676.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:36.502Z,1528868676.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:36.519Z,1528868676.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:36.906Z,1528868676.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:36.923Z,1528868676.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:37.309Z,1528868677.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:37.327Z,1528868677.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:37.710Z,1528868677.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:37.732Z,1528868677.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:38.101Z,1528868678.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:38.124Z,1528868678.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:38.502Z,1528868678.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:38.519Z,1528868678.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:38.902Z,1528868678.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:38.920Z,1528868678.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:39.295Z,1528868679.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:39.319Z,1528868679.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:39.702Z,1528868679.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:39.721Z,1528868679.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:40.107Z,1528868680.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:40.132Z,1528868680.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:40.509Z,1528868680.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:40.527Z,1528868680.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:40.908Z,1528868680.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:40.925Z,1528868680.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:41.302Z,1528868681.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:41.332Z,1528868681.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:41.699Z,1528868681.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:41.717Z,1528868681.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:42.101Z,1528868682.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:42.126Z,1528868682.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:42.496Z,1528868682.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:42.524Z,1528868682.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:42.907Z,1528868682.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:42.941Z,1528868682.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:43.316Z,1528868683.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:43.333Z,1528868683.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:43.717Z,1528868683.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:43.735Z,1528868683.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:44.092Z,1528868684.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:44.120Z,1528868684.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:44.503Z,1528868684.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:44.521Z,1528868684.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:44.915Z,1528868684.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:44.934Z,1528868684.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:45.312Z,1528868685.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:45.330Z,1528868685.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:45.711Z,1528868685.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:45.730Z,1528868685.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:46.091Z,1528868686.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:46.119Z,1528868686.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:46.500Z,1528868686.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:46.519Z,1528868686.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:46.911Z,1528868686.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:46.930Z,1528868686.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:47.315Z,1528868687.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:47.333Z,1528868687.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:47.708Z,1528868687.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:47.726Z,1528868687.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:48.101Z,1528868688.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:48.120Z,1528868688.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:48.501Z,1528868688.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:48.519Z,1528868688.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:48.906Z,1528868688.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:48.928Z,1528868688.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:49.314Z,1528868689.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:49.332Z,1528868689.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:49.715Z,1528868689.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:49.732Z,1528868689.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:50.092Z,1528868690.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:50.127Z,1528868690.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:50.498Z,1528868690.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:50.522Z,1528868690.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:50.914Z,1528868690.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:50.932Z,1528868690.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:51.311Z,1528868691.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:51.329Z,1528868691.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:51.711Z,1528868691.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:51.728Z,1528868691.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:52.103Z,1528868692.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:52.120Z,1528868692.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:52.491Z,1528868692.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:52.527Z,1528868692.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:52.911Z,1528868692.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:52.929Z,1528868692.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:53.312Z,1528868693.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:53.329Z,1528868693.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:53.711Z,1528868693.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:53.729Z,1528868693.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:54.102Z,1528868694.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:54.124Z,1528868694.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:54.491Z,1528868694.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:54.519Z,1528868694.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:54.908Z,1528868694.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:54.925Z,1528868694.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:55.314Z,1528868695.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:44:55.332Z,1528868695.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:55.731Z,1528868695.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:56.117Z,1528868696.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:56.518Z,1528868696.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:56.932Z,1528868696.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:57.336Z,1528868697.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:57.728Z,1528868697.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:58.124Z,1528868698.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:58.516Z,1528868698.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:58.930Z,1528868698.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:59.328Z,1528868699.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:44:59.729Z,1528868699.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:00.120Z,1528868700.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:00.522Z,1528868700.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:00.930Z,1528868700.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:01.332Z,1528868701.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:01.733Z,1528868701.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:02.120Z,1528868702.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:02.516Z,1528868702.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:02.934Z,1528868702.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:03.332Z,1528868703.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:03.729Z,1528868703.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:04.122Z,1528868704.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:04.520Z,1528868704.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:04.928Z,1528868704.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:05.340Z,1528868705.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:05.730Z,1528868705.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:06.121Z,1528868706.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:06.522Z,1528868706.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:06.929Z,1528868706.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:07.332Z,1528868707.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:07.740Z,1528868707.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:08.121Z,1528868708.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:08.531Z,1528868708.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:08.928Z,1528868708.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:09.332Z,1528868709.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:09.740Z,1528868709.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:10.133Z,1528868710.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:10.528Z,1528868710.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:10.920Z,1528868710.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:11.318Z,1528868711.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:11.720Z,1528868711.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:12.129Z,1528868712.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:12.540Z,1528868712.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:12.929Z,1528868712.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:13.324Z,1528868713.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:13.722Z,1528868713.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:14.123Z,1528868714.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:14.529Z,1528868714.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:17.667Z,1528868717.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:17.864Z,1528868717.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:18.221Z,1528868718.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:18.619Z,1528868718.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:19.012Z,1528868719.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:19.418Z,1528868719.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:19.804Z,1528868719.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:20.226Z,1528868720.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:20.628Z,1528868720.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:21.025Z,1528868721.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:21.404Z,1528868721.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:21.808Z,1528868721.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:22.211Z,1528868722.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:22.612Z,1528868722.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:23.011Z,1528868723.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:23.415Z,1528868723.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:23.812Z,1528868723.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:24.212Z,1528868724.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:24.607Z,1528868724.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:25.006Z,1528868725.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:25.418Z,1528868725.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:25.808Z,1528868725.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:26.212Z,1528868726.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:26.615Z,1528868726.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:27.015Z,1528868727.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:27.409Z,1528868727.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:27.809Z,1528868727.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:28.216Z,1528868728.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:28.606Z,1528868728.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:29.015Z,1528868729.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:29.416Z,1528868729.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:29.809Z,1528868729.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:30.208Z,1528868730.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:30.608Z,1528868730.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:31.006Z,1528868731.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:31.416Z,1528868731.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:31.808Z,1528868731.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:32.216Z,1528868732.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:32.616Z,1528868732.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:33.016Z,1528868733.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:33.402Z,1528868733.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:33.808Z,1528868733.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:34.219Z,1528868734.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:34.604Z,1528868734.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:35.016Z,1528868735.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:35.424Z,1528868735.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:35.820Z,1528868735.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:36.209Z,1528868736.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:36.608Z,1528868736.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:37.014Z,1528868737.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:37.420Z,1528868737.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:37.817Z,1528868737.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:38.208Z,1528868738.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:38.608Z,1528868738.608 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:38.608Z,1528868738.608 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2018-06-13T05:45:38.608Z,1528868738.608 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:45:38.610Z,1528868738.610 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:38.610Z,1528868738.610 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47
2018-06-13T05:45:38.610Z,1528868738.610 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:45:38.612Z,1528868738.612 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:38.612Z,1528868738.612 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2018-06-13T05:45:38.612Z,1528868738.612 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:45:38.685Z,1528868738.685 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:45:38.685Z,1528868738.685 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:45:38.686Z,1528868738.686 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:45:39.117Z,1528868739.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:45:39.117Z,1528868739.117 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2018-06-13T05:45:39.117Z,1528868739.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:45:39.117Z,1528868739.117 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47
2018-06-13T05:45:39.118Z,1528868739.118 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:45:39.118Z,1528868739.118 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2018-06-13T05:45:39.417Z,1528868739.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:45:39.418Z,1528868739.418 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:45:39.418Z,1528868739.418 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:45:39.418Z,1528868739.418 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:45:39.419Z,1528868739.419 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:45:39.419Z,1528868739.419 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:45:39.419Z,1528868739.419 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:45:39.420Z,1528868739.420 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:45:39.420Z,1528868739.420 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:45:39.825Z,1528868739.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:45:39.826Z,1528868739.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:40.220Z,1528868740.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:45:40.225Z,1528868740.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:40.604Z,1528868740.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:45:40.605Z,1528868740.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:41.015Z,1528868741.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:45:41.016Z,1528868741.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:41.418Z,1528868741.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:45:41.419Z,1528868741.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:41.820Z,1528868741.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:45:41.821Z,1528868741.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:42.208Z,1528868742.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:45:42.209Z,1528868742.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:42.608Z,1528868742.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:45:42.609Z,1528868742.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:43.016Z,1528868743.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:45:43.017Z,1528868743.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:43.415Z,1528868743.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:45:43.416Z,1528868743.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:43.816Z,1528868743.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:45:43.817Z,1528868743.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:44.207Z,1528868744.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:45:44.208Z,1528868744.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:44.607Z,1528868744.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:45:44.607Z,1528868744.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:45.016Z,1528868745.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:45:45.018Z,1528868745.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:45.420Z,1528868745.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:45:45.421Z,1528868745.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:45.817Z,1528868745.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:45:45.818Z,1528868745.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:46.208Z,1528868746.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:45:46.210Z,1528868746.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:46.607Z,1528868746.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:45:46.608Z,1528868746.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:47.017Z,1528868747.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:45:47.018Z,1528868747.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:47.421Z,1528868747.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:45:47.422Z,1528868747.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:47.824Z,1528868747.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:45:47.825Z,1528868747.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:48.209Z,1528868748.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:45:48.210Z,1528868748.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:48.626Z,1528868748.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:45:48.627Z,1528868748.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:49.017Z,1528868749.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:45:49.018Z,1528868749.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:49.428Z,1528868749.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:45:49.445Z,1528868749.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:49.828Z,1528868749.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:45:49.845Z,1528868749.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:50.208Z,1528868750.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:45:50.208Z,1528868750.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:50.607Z,1528868750.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:45:50.608Z,1528868750.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:51.021Z,1528868751.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:45:51.022Z,1528868751.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:51.420Z,1528868751.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T05:45:51.421Z,1528868751.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:51.816Z,1528868751.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T05:45:51.818Z,1528868751.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:52.213Z,1528868752.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T05:45:52.214Z,1528868752.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:52.606Z,1528868752.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:45:52.607Z,1528868752.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:53.017Z,1528868753.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:45:53.018Z,1528868753.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:53.429Z,1528868753.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:45:53.430Z,1528868753.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:53.820Z,1528868753.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:45:53.821Z,1528868753.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:54.209Z,1528868754.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:45:54.210Z,1528868754.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:54.625Z,1528868754.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:45:54.626Z,1528868754.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:55.017Z,1528868755.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:45:55.018Z,1528868755.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:55.421Z,1528868755.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:45:55.422Z,1528868755.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:55.828Z,1528868755.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:45:55.829Z,1528868755.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:56.212Z,1528868756.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:45:56.213Z,1528868756.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:56.608Z,1528868756.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:45:56.609Z,1528868756.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:57.020Z,1528868757.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:45:57.022Z,1528868757.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:57.420Z,1528868757.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:45:57.422Z,1528868757.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:57.817Z,1528868757.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:45:57.818Z,1528868757.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:58.224Z,1528868758.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:45:58.229Z,1528868758.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:58.609Z,1528868758.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:59.017Z,1528868759.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:59.422Z,1528868759.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:45:59.817Z,1528868759.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:00.218Z,1528868760.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:00.621Z,1528868760.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:01.018Z,1528868761.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:01.421Z,1528868761.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:01.823Z,1528868761.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:02.219Z,1528868762.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:02.616Z,1528868762.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:03.023Z,1528868763.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:03.424Z,1528868763.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:03.828Z,1528868763.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:04.221Z,1528868764.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:04.625Z,1528868764.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:05.032Z,1528868765.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:05.426Z,1528868765.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:05.824Z,1528868765.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:06.202Z,1528868766.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:06.616Z,1528868766.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:07.032Z,1528868767.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:07.434Z,1528868767.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:07.816Z,1528868767.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:08.209Z,1528868768.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:08.607Z,1528868768.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:08.967Z,1528868768.967 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T05:46:08.967Z,1528868768.967 [NAL9602] Data Fault, FailCount= 3
2018-06-13T05:46:08.967Z,1528868768.967 [NAL9602](ERROR): Data Fault
2018-06-13T05:46:09.020Z,1528868769.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:09.105Z,1528868769.105 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T05:46:09.366Z,1528868769.366 [NAL9602](INFO): Powering down
2018-06-13T05:46:09.414Z,1528868769.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:09.818Z,1528868769.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:10.222Z,1528868770.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:10.321Z,1528868770.321 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T05:46:10.321Z,1528868770.321 [NAL9602] No Fault, FailCount= 3
2018-06-13T05:46:10.607Z,1528868770.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:11.008Z,1528868771.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:11.405Z,1528868771.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:11.803Z,1528868771.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:12.208Z,1528868772.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:12.620Z,1528868772.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:13.002Z,1528868773.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:13.413Z,1528868773.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:13.806Z,1528868773.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:14.203Z,1528868774.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:14.616Z,1528868774.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:15.016Z,1528868775.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:15.410Z,1528868775.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:15.816Z,1528868775.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:18.914Z,1528868778.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:19.055Z,1528868779.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:19.450Z,1528868779.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:19.847Z,1528868779.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:20.239Z,1528868780.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:20.640Z,1528868780.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:21.032Z,1528868781.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:21.429Z,1528868781.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:21.832Z,1528868781.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:22.236Z,1528868782.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:22.628Z,1528868782.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:23.032Z,1528868783.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:23.433Z,1528868783.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:23.828Z,1528868783.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:24.256Z,1528868784.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:24.632Z,1528868784.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:25.029Z,1528868785.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:25.432Z,1528868785.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:25.832Z,1528868785.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:26.233Z,1528868786.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:26.632Z,1528868786.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:27.032Z,1528868787.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:27.432Z,1528868787.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:27.832Z,1528868787.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:28.234Z,1528868788.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:28.630Z,1528868788.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:29.033Z,1528868789.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:29.432Z,1528868789.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:29.830Z,1528868789.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:30.234Z,1528868790.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:30.632Z,1528868790.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:31.030Z,1528868791.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:31.432Z,1528868791.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:31.832Z,1528868791.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:32.230Z,1528868792.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:32.636Z,1528868792.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:33.036Z,1528868793.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:33.431Z,1528868793.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:33.840Z,1528868793.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:34.240Z,1528868794.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:34.631Z,1528868794.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:35.044Z,1528868795.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:35.436Z,1528868795.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:35.835Z,1528868795.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:36.240Z,1528868796.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:36.640Z,1528868796.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:37.034Z,1528868797.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:37.440Z,1528868797.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:37.837Z,1528868797.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:38.235Z,1528868798.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:38.640Z,1528868798.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:39.040Z,1528868799.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:39.402Z,1528868799.402 [NAL9602](INFO): Powering up NAL9602
2018-06-13T05:46:39.437Z,1528868799.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:39.836Z,1528868799.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:40.236Z,1528868800.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:40.636Z,1528868800.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:41.040Z,1528868801.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:41.440Z,1528868801.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:41.836Z,1528868801.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:42.240Z,1528868802.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:42.636Z,1528868802.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:43.035Z,1528868803.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:43.440Z,1528868803.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:43.840Z,1528868803.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:44.236Z,1528868804.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:44.644Z,1528868804.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:45.036Z,1528868805.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:45.437Z,1528868805.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:45.837Z,1528868805.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:46.237Z,1528868806.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:46.635Z,1528868806.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:47.037Z,1528868807.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:47.448Z,1528868807.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:47.835Z,1528868807.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:48.240Z,1528868808.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:48.642Z,1528868808.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:49.037Z,1528868809.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:49.465Z,1528868809.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:49.837Z,1528868809.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:50.259Z,1528868810.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:50.599Z,1528868810.599 [NAL9602](INFO): NAL9602 initialized
2018-06-13T05:46:50.648Z,1528868810.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:51.042Z,1528868811.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:51.447Z,1528868811.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:51.849Z,1528868811.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:52.250Z,1528868812.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:52.636Z,1528868812.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:53.042Z,1528868813.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:53.442Z,1528868813.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:53.835Z,1528868813.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:54.254Z,1528868814.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:54.648Z,1528868814.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:55.044Z,1528868815.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:55.440Z,1528868815.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:55.839Z,1528868815.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:56.238Z,1528868816.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:56.641Z,1528868816.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:57.036Z,1528868817.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:57.445Z,1528868817.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:57.847Z,1528868817.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:58.255Z,1528868818.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:58.639Z,1528868818.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:59.052Z,1528868819.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:59.444Z,1528868819.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:46:59.836Z,1528868819.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:00.252Z,1528868820.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:00.652Z,1528868820.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:01.048Z,1528868821.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:01.448Z,1528868821.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:01.839Z,1528868821.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:02.237Z,1528868822.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:02.642Z,1528868822.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:03.041Z,1528868823.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:03.445Z,1528868823.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:03.853Z,1528868823.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:04.263Z,1528868824.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:04.641Z,1528868824.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:05.041Z,1528868825.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:05.443Z,1528868825.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:05.838Z,1528868825.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:06.252Z,1528868826.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:06.656Z,1528868826.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:07.052Z,1528868827.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:07.441Z,1528868827.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:07.844Z,1528868827.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:08.241Z,1528868828.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:08.642Z,1528868828.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:09.043Z,1528868829.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:09.453Z,1528868829.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:09.853Z,1528868829.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:10.260Z,1528868830.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:10.642Z,1528868830.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:11.041Z,1528868831.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:11.442Z,1528868831.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:11.841Z,1528868831.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:12.252Z,1528868832.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:12.660Z,1528868832.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:13.053Z,1528868833.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:13.441Z,1528868833.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:13.843Z,1528868833.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:14.244Z,1528868834.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:14.642Z,1528868834.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:15.043Z,1528868835.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:15.456Z,1528868835.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:15.852Z,1528868835.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:18.964Z,1528868838.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:19.140Z,1528868839.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:19.516Z,1528868839.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:19.912Z,1528868839.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:20.336Z,1528868840.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:20.736Z,1528868840.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:21.137Z,1528868841.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:21.511Z,1528868841.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:21.911Z,1528868841.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:22.316Z,1528868842.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:22.712Z,1528868842.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:23.136Z,1528868843.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:23.540Z,1528868843.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:23.936Z,1528868843.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:24.316Z,1528868844.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:24.711Z,1528868844.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:25.136Z,1528868845.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:25.537Z,1528868845.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:25.937Z,1528868845.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:26.313Z,1528868846.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:26.711Z,1528868846.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:27.137Z,1528868847.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:27.536Z,1528868847.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:27.936Z,1528868847.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:28.313Z,1528868848.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:28.707Z,1528868848.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:29.136Z,1528868849.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:29.538Z,1528868849.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:29.936Z,1528868849.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:30.313Z,1528868850.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:30.716Z,1528868850.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:31.136Z,1528868851.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:31.534Z,1528868851.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:31.934Z,1528868851.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:32.314Z,1528868852.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:32.716Z,1528868852.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:33.140Z,1528868853.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:33.528Z,1528868853.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:33.923Z,1528868853.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:34.320Z,1528868854.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:34.714Z,1528868854.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:35.124Z,1528868855.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:35.532Z,1528868855.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:35.929Z,1528868855.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:36.328Z,1528868856.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:36.721Z,1528868856.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:37.119Z,1528868857.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:37.516Z,1528868857.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:37.928Z,1528868857.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:38.326Z,1528868858.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:38.728Z,1528868858.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:39.130Z,1528868859.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:39.515Z,1528868859.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:39.924Z,1528868859.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:40.333Z,1528868860.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:40.722Z,1528868860.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:41.123Z,1528868861.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:41.530Z,1528868861.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:41.926Z,1528868861.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:42.324Z,1528868862.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:42.724Z,1528868862.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:43.122Z,1528868863.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:43.522Z,1528868863.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:43.928Z,1528868863.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:44.323Z,1528868864.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:44.728Z,1528868864.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:45.130Z,1528868865.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:45.521Z,1528868865.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:45.923Z,1528868865.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:46.325Z,1528868866.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:46.726Z,1528868866.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:47.125Z,1528868867.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:47.530Z,1528868867.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:47.926Z,1528868867.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:48.326Z,1528868868.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:48.726Z,1528868868.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:49.108Z,1528868869.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:49.509Z,1528868869.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:49.932Z,1528868869.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:50.338Z,1528868870.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:50.736Z,1528868870.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:51.136Z,1528868871.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:51.516Z,1528868871.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:51.911Z,1528868871.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:52.312Z,1528868872.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:52.712Z,1528868872.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:53.111Z,1528868873.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:53.538Z,1528868873.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:53.936Z,1528868873.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:54.336Z,1528868874.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:54.712Z,1528868874.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:55.111Z,1528868875.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:55.536Z,1528868875.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:55.912Z,1528868875.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:56.339Z,1528868876.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:56.722Z,1528868876.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:57.123Z,1528868877.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:57.521Z,1528868877.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:57.920Z,1528868877.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:58.320Z,1528868878.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:58.711Z,1528868878.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:59.114Z,1528868879.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:59.523Z,1528868879.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:47:59.923Z,1528868879.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:00.320Z,1528868880.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:00.720Z,1528868880.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:01.112Z,1528868881.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:01.513Z,1528868881.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:01.914Z,1528868881.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:02.317Z,1528868882.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:02.722Z,1528868882.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:03.145Z,1528868883.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:03.513Z,1528868883.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:03.913Z,1528868883.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:04.320Z,1528868884.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:04.711Z,1528868884.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:05.113Z,1528868885.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:05.523Z,1528868885.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:05.919Z,1528868885.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:06.315Z,1528868886.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:06.715Z,1528868886.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:07.112Z,1528868887.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:07.513Z,1528868887.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:07.920Z,1528868887.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:08.320Z,1528868888.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:08.722Z,1528868888.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:09.123Z,1528868889.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:09.520Z,1528868889.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:09.920Z,1528868889.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:10.316Z,1528868890.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:10.712Z,1528868890.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:11.114Z,1528868891.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:11.506Z,1528868891.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:11.524Z,1528868891.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:11.906Z,1528868891.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:11.924Z,1528868891.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:12.302Z,1528868892.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:12.319Z,1528868892.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:12.698Z,1528868892.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:12.716Z,1528868892.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:13.090Z,1528868893.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:13.124Z,1528868893.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:13.495Z,1528868893.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:13.527Z,1528868893.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:13.902Z,1528868893.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:13.920Z,1528868893.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:14.306Z,1528868894.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:14.323Z,1528868894.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:14.717Z,1528868894.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:14.748Z,1528868894.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:14.751Z,1528868894.751 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T05:43:14.4Z
2018-06-13T05:48:14.752Z,1528868894.752 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T05:48:14.752Z,1528868894.752 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T05:48:17.813Z,1528868897.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:17.855Z,1528868897.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:18.902Z,1528868898.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:18.920Z,1528868898.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:19.055Z,1528868899.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:19.082Z,1528868899.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:19.462Z,1528868899.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:19.480Z,1528868899.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:19.858Z,1528868899.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:19.876Z,1528868899.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:20.263Z,1528868900.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:20.280Z,1528868900.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:23.397Z,1528868903.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:23.415Z,1528868903.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:23.505Z,1528868903.505 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0056.lzma
2018-06-13T05:48:23.526Z,1528868903.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:23.560Z,1528868903.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:23.948Z,1528868903.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:23.966Z,1528868903.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:24.305Z,1528868904.305 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0056.lzma.bak
2018-06-13T05:48:24.306Z,1528868904.306 [DataOverHttps](INFO): SBD MOMSN=8328681
2018-06-13T05:48:24.350Z,1528868904.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:24.385Z,1528868904.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:26.249Z,1528868906.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:26.267Z,1528868906.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:26.378Z,1528868906.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:26.416Z,1528868906.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:26.779Z,1528868906.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:26.814Z,1528868906.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:29.912Z,1528868909.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:29.930Z,1528868909.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:30.055Z,1528868910.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:30.105Z,1528868910.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:30.464Z,1528868910.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:30.488Z,1528868910.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:30.864Z,1528868910.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:30.882Z,1528868910.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:31.260Z,1528868911.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:48:31.278Z,1528868911.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:31.677Z,1528868911.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:34.774Z,1528868914.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:34.858Z,1528868914.858 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0057.lzma
2018-06-13T05:48:34.920Z,1528868914.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:35.326Z,1528868915.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:35.658Z,1528868915.658 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0057.lzma.bak
2018-06-13T05:48:35.658Z,1528868915.658 [DataOverHttps](INFO): SBD MOMSN=8328683
2018-06-13T05:48:35.737Z,1528868915.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:38.270Z,1528868918.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:38.276Z,1528868918.276 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T05:48:38.277Z,1528868918.277 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T05:48:38.277Z,1528868918.277 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T05:48:38.394Z,1528868918.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:38.800Z,1528868918.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:41.942Z,1528868921.942 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:41.942Z,1528868921.942 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2018-06-13T05:48:41.943Z,1528868921.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:48:41.944Z,1528868921.944 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:41.944Z,1528868921.944 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48
2018-06-13T05:48:41.944Z,1528868921.944 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:48:41.946Z,1528868921.946 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:41.946Z,1528868921.946 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2018-06-13T05:48:41.946Z,1528868921.946 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:48:42.037Z,1528868922.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:48:42.037Z,1528868922.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:48:42.037Z,1528868922.037 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:48:42.189Z,1528868922.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:48:42.189Z,1528868922.189 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2018-06-13T05:48:42.190Z,1528868922.190 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:48:42.190Z,1528868922.190 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48
2018-06-13T05:48:42.190Z,1528868922.190 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:48:42.190Z,1528868922.190 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2018-06-13T05:48:42.499Z,1528868922.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:48:42.499Z,1528868922.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:48:42.500Z,1528868922.500 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:48:42.500Z,1528868922.500 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:48:42.500Z,1528868922.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:48:42.501Z,1528868922.501 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:48:42.501Z,1528868922.501 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:48:42.502Z,1528868922.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:48:42.502Z,1528868922.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:48:42.904Z,1528868922.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T05:48:42.905Z,1528868922.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:43.296Z,1528868923.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T05:48:43.297Z,1528868923.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:43.700Z,1528868923.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T05:48:43.701Z,1528868923.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:44.101Z,1528868924.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T05:48:44.102Z,1528868924.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:44.497Z,1528868924.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T05:48:44.498Z,1528868924.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:44.904Z,1528868924.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T05:48:44.905Z,1528868924.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:45.306Z,1528868925.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T05:48:45.307Z,1528868925.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:45.702Z,1528868925.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T05:48:45.703Z,1528868925.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:46.098Z,1528868926.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T05:48:46.099Z,1528868926.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:46.498Z,1528868926.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T05:48:46.499Z,1528868926.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:46.904Z,1528868926.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T05:48:46.905Z,1528868926.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:47.304Z,1528868927.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T05:48:47.306Z,1528868927.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:47.715Z,1528868927.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T05:48:47.716Z,1528868927.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:48.098Z,1528868928.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T05:48:48.099Z,1528868928.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:48.501Z,1528868928.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T05:48:48.502Z,1528868928.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:48.909Z,1528868928.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T05:48:48.910Z,1528868928.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:49.308Z,1528868929.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T05:48:49.309Z,1528868929.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:49.706Z,1528868929.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T05:48:49.707Z,1528868929.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:50.108Z,1528868930.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T05:48:50.109Z,1528868930.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:50.502Z,1528868930.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T05:48:50.503Z,1528868930.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:50.901Z,1528868930.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T05:48:50.902Z,1528868930.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:51.306Z,1528868931.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T05:48:51.307Z,1528868931.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:51.704Z,1528868931.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T05:48:51.705Z,1528868931.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:52.102Z,1528868932.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T05:48:52.103Z,1528868932.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:52.503Z,1528868932.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T05:48:52.504Z,1528868932.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:52.880Z,1528868932.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T05:48:52.897Z,1528868932.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:53.310Z,1528868933.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T05:48:53.311Z,1528868933.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:53.715Z,1528868933.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-06-13T05:48:53.716Z,1528868933.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:54.102Z,1528868934.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T05:48:54.103Z,1528868934.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:54.493Z,1528868934.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T05:48:54.494Z,1528868934.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:54.884Z,1528868934.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T05:48:54.886Z,1528868934.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:55.312Z,1528868935.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T05:48:55.313Z,1528868935.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:55.714Z,1528868935.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T05:48:55.715Z,1528868935.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:56.099Z,1528868936.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T05:48:56.100Z,1528868936.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:56.490Z,1528868936.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T05:48:56.490Z,1528868936.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:56.889Z,1528868936.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T05:48:56.890Z,1528868936.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:57.323Z,1528868937.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T05:48:57.324Z,1528868937.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:57.699Z,1528868937.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T05:48:57.700Z,1528868937.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:58.099Z,1528868938.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T05:48:58.100Z,1528868938.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:58.491Z,1528868938.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T05:48:58.492Z,1528868938.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:58.890Z,1528868938.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T05:48:58.891Z,1528868938.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:59.300Z,1528868939.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T05:48:59.301Z,1528868939.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:48:59.699Z,1528868939.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T05:48:59.700Z,1528868939.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:00.095Z,1528868940.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T05:49:00.096Z,1528868940.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:00.491Z,1528868940.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T05:49:00.492Z,1528868940.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:00.896Z,1528868940.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T05:49:00.902Z,1528868940.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:01.304Z,1528868941.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T05:49:01.305Z,1528868941.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:01.704Z,1528868941.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T05:49:01.705Z,1528868941.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:02.101Z,1528868942.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:02.496Z,1528868942.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:02.894Z,1528868942.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:03.304Z,1528868943.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:03.708Z,1528868943.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:04.100Z,1528868944.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:04.495Z,1528868944.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:04.896Z,1528868944.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:05.301Z,1528868945.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:05.704Z,1528868945.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:06.101Z,1528868946.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:06.489Z,1528868946.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:06.901Z,1528868946.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:07.297Z,1528868947.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:07.712Z,1528868947.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:08.106Z,1528868948.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:08.493Z,1528868948.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:08.901Z,1528868948.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:09.307Z,1528868949.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:09.702Z,1528868949.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:10.106Z,1528868950.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:10.465Z,1528868950.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:49:10.507Z,1528868950.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:10.863Z,1528868950.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:49:10.891Z,1528868950.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:11.284Z,1528868951.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T05:49:11.302Z,1528868951.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:11.710Z,1528868951.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:12.099Z,1528868952.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:12.504Z,1528868952.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:12.904Z,1528868952.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:13.299Z,1528868953.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:13.718Z,1528868953.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:14.107Z,1528868954.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:14.500Z,1528868954.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:14.898Z,1528868954.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:15.303Z,1528868955.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:15.702Z,1528868955.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:16.100Z,1528868956.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:16.496Z,1528868956.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:16.924Z,1528868956.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:17.415Z,1528868957.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:17.786Z,1528868957.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:18.100Z,1528868958.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:18.503Z,1528868958.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:18.891Z,1528868958.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:19.330Z,1528868959.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:19.712Z,1528868959.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:20.114Z,1528868960.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:20.492Z,1528868960.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:20.887Z,1528868960.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:21.316Z,1528868961.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:21.712Z,1528868961.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:22.117Z,1528868962.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:22.486Z,1528868962.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:22.887Z,1528868962.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:23.312Z,1528868963.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:23.717Z,1528868963.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:24.112Z,1528868964.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:24.492Z,1528868964.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:24.883Z,1528868964.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:25.315Z,1528868965.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:25.712Z,1528868965.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:26.114Z,1528868966.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:26.492Z,1528868966.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:26.888Z,1528868966.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:27.316Z,1528868967.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:27.712Z,1528868967.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:28.112Z,1528868968.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:28.483Z,1528868968.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:28.892Z,1528868968.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:29.287Z,1528868969.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:29.716Z,1528868969.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:30.112Z,1528868970.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:30.512Z,1528868970.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:30.888Z,1528868970.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:31.288Z,1528868971.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:31.688Z,1528868971.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:32.088Z,1528868972.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:32.512Z,1528868972.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:32.912Z,1528868972.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:33.313Z,1528868973.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:33.688Z,1528868973.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:34.087Z,1528868974.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:34.483Z,1528868974.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:34.909Z,1528868974.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:35.287Z,1528868975.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:35.711Z,1528868975.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:36.112Z,1528868976.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:36.516Z,1528868976.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:36.883Z,1528868976.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:37.288Z,1528868977.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:37.689Z,1528868977.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:38.088Z,1528868978.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:38.512Z,1528868978.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:38.909Z,1528868978.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:42.018Z,1528868982.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:42.172Z,1528868982.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:42.569Z,1528868982.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:42.944Z,1528868982.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:43.370Z,1528868983.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:43.767Z,1528868983.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:44.172Z,1528868984.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:44.545Z,1528868984.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:44.948Z,1528868984.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:45.375Z,1528868985.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:45.772Z,1528868985.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:46.174Z,1528868986.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:46.548Z,1528868986.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:46.944Z,1528868986.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:47.374Z,1528868987.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:47.773Z,1528868987.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:48.170Z,1528868988.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:48.552Z,1528868988.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:48.943Z,1528868988.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:49.379Z,1528868989.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:49.779Z,1528868989.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:50.158Z,1528868990.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:50.548Z,1528868990.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:50.947Z,1528868990.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:51.385Z,1528868991.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:51.759Z,1528868991.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:52.158Z,1528868992.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:52.553Z,1528868992.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:52.950Z,1528868992.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:53.379Z,1528868993.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:53.758Z,1528868993.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:54.155Z,1528868994.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:54.552Z,1528868994.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:54.948Z,1528868994.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:55.356Z,1528868995.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:55.758Z,1528868995.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:56.186Z,1528868996.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:56.551Z,1528868996.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:56.961Z,1528868996.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:57.360Z,1528868997.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:57.756Z,1528868997.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:58.156Z,1528868998.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:58.552Z,1528868998.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:58.949Z,1528868998.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:59.356Z,1528868999.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:49:59.760Z,1528868999.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:00.154Z,1528869000.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:00.549Z,1528869000.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:00.950Z,1528869000.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:01.356Z,1528869001.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:01.758Z,1528869001.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:02.159Z,1528869002.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:02.550Z,1528869002.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:02.949Z,1528869002.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:03.359Z,1528869003.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:03.755Z,1528869003.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:04.156Z,1528869004.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:04.550Z,1528869004.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:04.948Z,1528869004.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:05.360Z,1528869005.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:05.760Z,1528869005.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:06.155Z,1528869006.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:06.550Z,1528869006.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:06.956Z,1528869006.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:07.348Z,1528869007.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:07.760Z,1528869007.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:08.160Z,1528869008.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:08.555Z,1528869008.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:08.952Z,1528869008.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:09.351Z,1528869009.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:09.753Z,1528869009.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:10.149Z,1528869010.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:10.557Z,1528869010.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:10.960Z,1528869010.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:11.364Z,1528869011.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:11.752Z,1528869011.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:12.148Z,1528869012.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:12.552Z,1528869012.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:12.951Z,1528869012.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:13.356Z,1528869013.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:13.761Z,1528869013.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:14.164Z,1528869014.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:14.557Z,1528869014.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:14.952Z,1528869014.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:15.350Z,1528869015.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:15.748Z,1528869015.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:16.151Z,1528869016.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:16.564Z,1528869016.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:16.960Z,1528869016.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:17.364Z,1528869017.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:17.751Z,1528869017.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:18.156Z,1528869018.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:18.553Z,1528869018.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:18.951Z,1528869018.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:19.352Z,1528869019.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:19.764Z,1528869019.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:20.163Z,1528869020.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:20.557Z,1528869020.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:20.952Z,1528869020.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:21.355Z,1528869021.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:21.749Z,1528869021.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:22.148Z,1528869022.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:22.561Z,1528869022.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:22.961Z,1528869022.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:23.363Z,1528869023.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:23.754Z,1528869023.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:24.152Z,1528869024.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:24.552Z,1528869024.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:24.955Z,1528869024.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:25.349Z,1528869025.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:25.761Z,1528869025.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:26.168Z,1528869026.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:26.557Z,1528869026.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:26.952Z,1528869026.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:27.354Z,1528869027.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:27.756Z,1528869027.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:28.153Z,1528869028.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:28.565Z,1528869028.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:28.961Z,1528869028.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:29.360Z,1528869029.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:29.754Z,1528869029.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:30.149Z,1528869030.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:30.552Z,1528869030.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:30.954Z,1528869030.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:31.348Z,1528869031.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:31.760Z,1528869031.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:32.166Z,1528869032.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:32.558Z,1528869032.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:32.953Z,1528869032.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:33.353Z,1528869033.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:33.750Z,1528869033.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:34.160Z,1528869034.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:34.569Z,1528869034.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:34.963Z,1528869034.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:35.368Z,1528869035.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:35.755Z,1528869035.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:36.159Z,1528869036.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:36.554Z,1528869036.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:36.956Z,1528869036.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:37.360Z,1528869037.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:37.765Z,1528869037.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:38.165Z,1528869038.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:38.562Z,1528869038.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:38.954Z,1528869038.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:42.066Z,1528869042.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:42.212Z,1528869042.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:42.616Z,1528869042.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:43.017Z,1528869043.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:43.404Z,1528869043.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:43.803Z,1528869043.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:44.205Z,1528869044.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:44.602Z,1528869044.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:45.006Z,1528869045.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:45.408Z,1528869045.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:45.805Z,1528869045.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:46.209Z,1528869046.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:46.606Z,1528869046.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:46.996Z,1528869046.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:47.407Z,1528869047.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:47.810Z,1528869047.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:48.219Z,1528869048.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:48.612Z,1528869048.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:49.010Z,1528869049.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:49.407Z,1528869049.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:49.808Z,1528869049.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:50.184Z,1528869050.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:50.618Z,1528869050.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:50.989Z,1528869050.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:51.392Z,1528869051.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:51.815Z,1528869051.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:52.220Z,1528869052.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:52.624Z,1528869052.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:52.988Z,1528869052.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:53.389Z,1528869053.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:53.817Z,1528869053.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:54.188Z,1528869054.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:54.611Z,1528869054.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:55.016Z,1528869055.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:55.420Z,1528869055.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:55.816Z,1528869055.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:56.192Z,1528869056.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:56.616Z,1528869056.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:56.992Z,1528869056.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:57.392Z,1528869057.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:57.800Z,1528869057.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:58.219Z,1528869058.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:58.604Z,1528869058.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:58.989Z,1528869058.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:59.391Z,1528869059.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:50:59.792Z,1528869059.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:00.193Z,1528869060.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:00.604Z,1528869060.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:01.004Z,1528869061.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:01.404Z,1528869061.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:01.808Z,1528869061.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:02.206Z,1528869062.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:02.596Z,1528869062.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:03.009Z,1528869063.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:03.401Z,1528869063.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:03.803Z,1528869063.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:04.211Z,1528869064.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:04.606Z,1528869064.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:05.002Z,1528869065.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:05.402Z,1528869065.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:05.811Z,1528869065.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:06.196Z,1528869066.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:06.607Z,1528869066.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:07.016Z,1528869067.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:07.405Z,1528869067.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:07.808Z,1528869067.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:08.206Z,1528869068.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:08.588Z,1528869068.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:08.990Z,1528869068.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:09.389Z,1528869069.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:09.815Z,1528869069.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:10.219Z,1528869070.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:10.604Z,1528869070.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:10.993Z,1528869070.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:11.394Z,1528869071.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:11.798Z,1528869071.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:12.192Z,1528869072.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:12.605Z,1528869072.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:13.004Z,1528869073.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:13.400Z,1528869073.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:13.796Z,1528869073.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:14.196Z,1528869074.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:14.593Z,1528869074.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:15.013Z,1528869075.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:15.400Z,1528869075.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:15.806Z,1528869075.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:16.216Z,1528869076.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:16.616Z,1528869076.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:17.014Z,1528869077.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:17.399Z,1528869077.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:17.804Z,1528869077.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:18.199Z,1528869078.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:18.616Z,1528869078.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:19.008Z,1528869079.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:19.407Z,1528869079.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:19.808Z,1528869079.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:20.206Z,1528869080.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:20.605Z,1528869080.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:21.010Z,1528869081.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:21.414Z,1528869081.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:21.816Z,1528869081.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:22.216Z,1528869082.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:22.611Z,1528869082.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:23.007Z,1528869083.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:23.409Z,1528869083.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:23.809Z,1528869083.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:24.208Z,1528869084.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:24.611Z,1528869084.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:25.013Z,1528869085.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:25.415Z,1528869085.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:25.792Z,1528869085.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:26.188Z,1528869086.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:26.592Z,1528869086.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:26.992Z,1528869086.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:27.392Z,1528869087.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:27.820Z,1528869087.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:28.224Z,1528869088.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:28.604Z,1528869088.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:28.993Z,1528869088.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:29.395Z,1528869089.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:29.792Z,1528869089.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:30.195Z,1528869090.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:30.605Z,1528869090.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:31.003Z,1528869091.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:31.400Z,1528869091.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:31.795Z,1528869091.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:32.192Z,1528869092.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:32.598Z,1528869092.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:33.004Z,1528869093.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:33.395Z,1528869093.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:33.804Z,1528869093.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:34.203Z,1528869094.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:34.604Z,1528869094.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:35.001Z,1528869095.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:35.394Z,1528869095.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:35.795Z,1528869095.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:36.199Z,1528869096.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:36.604Z,1528869096.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:37.004Z,1528869097.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:37.403Z,1528869097.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:37.798Z,1528869097.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:38.195Z,1528869098.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:38.596Z,1528869098.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:39.011Z,1528869099.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:42.104Z,1528869102.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:42.288Z,1528869102.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:42.676Z,1528869102.676 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:42.676Z,1528869102.676 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2018-06-13T05:51:42.676Z,1528869102.676 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:51:42.678Z,1528869102.678 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:42.678Z,1528869102.678 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49
2018-06-13T05:51:42.678Z,1528869102.678 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:51:42.680Z,1528869102.680 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:42.680Z,1528869102.680 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2018-06-13T05:51:42.680Z,1528869102.680 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:51:42.761Z,1528869102.761 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:51:42.762Z,1528869102.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:51:42.762Z,1528869102.762 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:51:43.165Z,1528869103.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:51:43.165Z,1528869103.165 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2018-06-13T05:51:43.166Z,1528869103.166 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:51:43.166Z,1528869103.166 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49
2018-06-13T05:51:43.166Z,1528869103.166 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:51:43.166Z,1528869103.166 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2018-06-13T05:51:43.463Z,1528869103.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:51:43.463Z,1528869103.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:51:43.464Z,1528869103.464 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:51:43.464Z,1528869103.464 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:51:43.464Z,1528869103.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:51:43.465Z,1528869103.465 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:51:43.465Z,1528869103.465 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:51:43.466Z,1528869103.466 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:51:43.466Z,1528869103.466 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:51:43.867Z,1528869103.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:51:43.868Z,1528869103.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:44.263Z,1528869104.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:51:44.264Z,1528869104.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:44.667Z,1528869104.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:51:44.668Z,1528869104.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:45.071Z,1528869105.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:51:45.072Z,1528869105.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:45.471Z,1528869105.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:51:45.472Z,1528869105.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:45.862Z,1528869105.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:51:45.863Z,1528869105.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:46.261Z,1528869106.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:51:46.262Z,1528869106.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:46.659Z,1528869106.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:51:46.660Z,1528869106.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:47.063Z,1528869107.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:51:47.064Z,1528869107.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:47.461Z,1528869107.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:51:47.462Z,1528869107.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:47.866Z,1528869107.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:51:47.867Z,1528869107.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:48.270Z,1528869108.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:51:48.271Z,1528869108.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:48.666Z,1528869108.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:51:48.667Z,1528869108.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:49.059Z,1528869109.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:51:49.060Z,1528869109.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:49.461Z,1528869109.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:51:49.462Z,1528869109.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:49.867Z,1528869109.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:51:49.868Z,1528869109.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:50.263Z,1528869110.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:51:50.264Z,1528869110.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:50.671Z,1528869110.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:51:50.671Z,1528869110.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:51.070Z,1528869111.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:51:51.071Z,1528869111.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:51.471Z,1528869111.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:51:51.472Z,1528869111.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:51.862Z,1528869111.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:51:51.863Z,1528869111.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:52.261Z,1528869112.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:51:52.262Z,1528869112.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:52.660Z,1528869112.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:51:52.661Z,1528869112.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:53.062Z,1528869113.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:51:53.063Z,1528869113.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:53.461Z,1528869113.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:51:53.462Z,1528869113.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:53.866Z,1528869113.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:51:53.867Z,1528869113.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:54.270Z,1528869114.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:51:54.271Z,1528869114.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:54.667Z,1528869114.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:51:54.668Z,1528869114.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:55.059Z,1528869115.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:51:55.060Z,1528869115.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:55.462Z,1528869115.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T05:51:55.463Z,1528869115.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:55.863Z,1528869115.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T05:51:55.864Z,1528869115.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:56.263Z,1528869116.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T05:51:56.264Z,1528869116.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:56.668Z,1528869116.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:51:56.669Z,1528869116.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:57.070Z,1528869117.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:51:57.071Z,1528869117.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:57.471Z,1528869117.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:51:57.472Z,1528869117.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:57.861Z,1528869117.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:51:57.862Z,1528869117.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:58.268Z,1528869118.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:51:58.269Z,1528869118.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:58.659Z,1528869118.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:51:58.660Z,1528869118.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:59.062Z,1528869119.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:51:59.063Z,1528869119.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:59.462Z,1528869119.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:51:59.463Z,1528869119.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:51:59.870Z,1528869119.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:51:59.871Z,1528869119.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:00.270Z,1528869120.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:52:00.271Z,1528869120.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:00.667Z,1528869120.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:52:00.667Z,1528869120.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:01.060Z,1528869121.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:52:01.061Z,1528869121.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:01.463Z,1528869121.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:52:01.464Z,1528869121.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:01.864Z,1528869121.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:52:01.865Z,1528869121.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:02.263Z,1528869122.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:52:02.264Z,1528869122.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:02.671Z,1528869122.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T05:52:02.672Z,1528869122.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:03.070Z,1528869123.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:03.494Z,1528869123.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:03.864Z,1528869123.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:04.267Z,1528869124.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:04.666Z,1528869124.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:05.061Z,1528869125.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:05.474Z,1528869125.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:05.871Z,1528869125.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:06.273Z,1528869126.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:06.676Z,1528869126.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:07.065Z,1528869127.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:07.461Z,1528869127.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:07.866Z,1528869127.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:08.263Z,1528869128.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:08.668Z,1528869128.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:09.071Z,1528869129.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:09.476Z,1528869129.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:09.861Z,1528869129.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:10.263Z,1528869130.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:10.663Z,1528869130.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:11.064Z,1528869131.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:11.464Z,1528869131.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:11.871Z,1528869131.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:12.272Z,1528869132.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:12.676Z,1528869132.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:13.064Z,1528869133.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:13.460Z,1528869133.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:13.865Z,1528869133.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:14.272Z,1528869134.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:14.676Z,1528869134.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:15.076Z,1528869135.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:15.472Z,1528869135.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:15.865Z,1528869135.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:16.265Z,1528869136.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:16.663Z,1528869136.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:17.061Z,1528869137.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:17.466Z,1528869137.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:17.873Z,1528869137.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:18.276Z,1528869138.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:18.672Z,1528869138.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:19.066Z,1528869139.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:19.462Z,1528869139.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:19.865Z,1528869139.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:20.263Z,1528869140.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:20.672Z,1528869140.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:21.075Z,1528869141.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:21.480Z,1528869141.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:21.859Z,1528869141.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:22.266Z,1528869142.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:22.665Z,1528869142.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:23.071Z,1528869143.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:23.464Z,1528869143.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:23.880Z,1528869143.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:24.271Z,1528869144.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:24.673Z,1528869144.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:25.063Z,1528869145.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:25.465Z,1528869145.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:25.866Z,1528869145.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:26.267Z,1528869146.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:26.676Z,1528869146.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:27.075Z,1528869147.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:27.480Z,1528869147.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:27.872Z,1528869147.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:28.264Z,1528869148.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:28.667Z,1528869148.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:29.061Z,1528869149.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:29.467Z,1528869149.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:29.872Z,1528869149.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:30.276Z,1528869150.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:30.674Z,1528869150.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:31.067Z,1528869151.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:31.462Z,1528869151.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:31.871Z,1528869151.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:32.264Z,1528869152.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:32.673Z,1528869152.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:33.080Z,1528869153.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:33.480Z,1528869153.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:33.866Z,1528869153.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:34.267Z,1528869154.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:34.663Z,1528869154.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:35.070Z,1528869155.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:35.472Z,1528869155.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:35.884Z,1528869155.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:36.281Z,1528869156.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:36.675Z,1528869156.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:37.067Z,1528869157.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:37.462Z,1528869157.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:37.866Z,1528869157.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:38.268Z,1528869158.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:38.681Z,1528869158.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:39.084Z,1528869159.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:39.477Z,1528869159.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:39.888Z,1528869159.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:40.288Z,1528869160.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:43.375Z,1528869163.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:43.524Z,1528869163.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:43.928Z,1528869163.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:44.328Z,1528869164.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:44.722Z,1528869164.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:45.120Z,1528869165.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:45.520Z,1528869165.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:45.919Z,1528869165.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:46.316Z,1528869166.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:46.726Z,1528869166.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:47.123Z,1528869167.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:47.523Z,1528869167.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:47.917Z,1528869167.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:48.319Z,1528869168.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:48.714Z,1528869168.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:49.116Z,1528869169.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:49.518Z,1528869169.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:49.926Z,1528869169.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:50.326Z,1528869170.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:50.723Z,1528869170.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:51.130Z,1528869171.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:51.511Z,1528869171.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:51.912Z,1528869171.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:52.316Z,1528869172.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:52.726Z,1528869172.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:53.124Z,1528869173.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:53.520Z,1528869173.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:53.910Z,1528869173.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:54.309Z,1528869174.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:54.720Z,1528869174.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:55.116Z,1528869175.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:55.511Z,1528869175.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:55.922Z,1528869175.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:56.324Z,1528869176.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:56.721Z,1528869176.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:57.112Z,1528869177.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:57.515Z,1528869177.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:57.911Z,1528869177.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:58.320Z,1528869178.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:58.728Z,1528869178.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:59.123Z,1528869179.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:59.525Z,1528869179.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:52:59.915Z,1528869179.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:00.313Z,1528869180.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:00.714Z,1528869180.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:01.114Z,1528869181.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:01.514Z,1528869181.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:01.928Z,1528869181.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:02.336Z,1528869182.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:02.728Z,1528869182.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:03.113Z,1528869183.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:03.515Z,1528869183.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:03.914Z,1528869183.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:04.320Z,1528869184.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:04.732Z,1528869184.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:05.132Z,1528869185.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:05.525Z,1528869185.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:05.914Z,1528869185.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:06.312Z,1528869186.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:06.720Z,1528869186.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:07.125Z,1528869187.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:07.519Z,1528869187.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:07.934Z,1528869187.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:08.326Z,1528869188.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:08.728Z,1528869188.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:09.127Z,1528869189.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:09.515Z,1528869189.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:09.914Z,1528869189.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:10.333Z,1528869190.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:10.754Z,1528869190.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:11.126Z,1528869191.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:11.528Z,1528869191.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:11.920Z,1528869191.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:12.320Z,1528869192.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:12.714Z,1528869192.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:13.116Z,1528869193.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:13.528Z,1528869193.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:13.955Z,1528869193.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:14.327Z,1528869194.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:14.720Z,1528869194.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:15.131Z,1528869195.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:15.520Z,1528869195.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:15.920Z,1528869195.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:16.314Z,1528869196.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:16.731Z,1528869196.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:17.126Z,1528869197.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:17.524Z,1528869197.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:17.928Z,1528869197.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:18.316Z,1528869198.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:18.717Z,1528869198.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:19.128Z,1528869199.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:19.512Z,1528869199.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:19.940Z,1528869199.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:20.329Z,1528869200.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.389461 seconds old.
2018-06-13T05:53:20.330Z,1528869200.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:20.331Z,1528869200.331 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.373933 seconds old.
2018-06-13T05:53:20.332Z,1528869200.332 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.374153 seconds old.
2018-06-13T05:53:20.723Z,1528869200.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.783724 seconds old.
2018-06-13T05:53:20.724Z,1528869200.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:20.725Z,1528869200.725 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.768107 seconds old.
2018-06-13T05:53:20.726Z,1528869200.726 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.768368 seconds old.
2018-06-13T05:53:21.115Z,1528869201.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.175609 seconds old.
2018-06-13T05:53:21.116Z,1528869201.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:21.117Z,1528869201.117 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.159788 seconds old.
2018-06-13T05:53:21.118Z,1528869201.118 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.160222 seconds old.
2018-06-13T05:53:21.531Z,1528869201.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.591409 seconds old.
2018-06-13T05:53:21.532Z,1528869201.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:21.533Z,1528869201.533 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.575578 seconds old.
2018-06-13T05:53:21.534Z,1528869201.534 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.576026 seconds old.
2018-06-13T05:53:21.930Z,1528869201.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:22.316Z,1528869202.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:22.731Z,1528869202.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:23.140Z,1528869203.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:23.527Z,1528869203.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:23.934Z,1528869203.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:24.317Z,1528869204.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:24.744Z,1528869204.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:25.128Z,1528869205.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:25.532Z,1528869205.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:25.932Z,1528869205.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:26.334Z,1528869206.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:26.739Z,1528869206.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:27.134Z,1528869207.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:27.532Z,1528869207.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:27.936Z,1528869207.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:28.304Z,1528869208.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:28.736Z,1528869208.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:29.133Z,1528869209.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:29.540Z,1528869209.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:29.905Z,1528869209.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:30.336Z,1528869210.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:30.739Z,1528869210.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:31.146Z,1528869211.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:31.516Z,1528869211.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:31.915Z,1528869211.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:32.313Z,1528869212.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:32.716Z,1528869212.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:33.128Z,1528869213.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:33.525Z,1528869213.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:33.918Z,1528869213.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:34.313Z,1528869214.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:34.720Z,1528869214.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:35.128Z,1528869215.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:35.524Z,1528869215.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:35.917Z,1528869215.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:36.312Z,1528869216.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:36.722Z,1528869216.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:37.125Z,1528869217.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:37.524Z,1528869217.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:37.911Z,1528869217.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:38.312Z,1528869218.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:38.728Z,1528869218.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:38.731Z,1528869218.731 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T05:53:38.731Z,1528869218.731 [Default:CheckIn:C.Wait] Stopped
2018-06-13T05:53:38.731Z,1528869218.731 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T05:53:38.731Z,1528869218.731 [Default:CheckIn:D] Running Loop=1
2018-06-13T05:53:39.128Z,1528869219.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:39.131Z,1528869219.131 [Default:CheckIn:D] Stopped
2018-06-13T05:53:39.131Z,1528869219.131 [Default:CheckIn:E] Running Loop=1
2018-06-13T05:53:42.232Z,1528869222.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:42.235Z,1528869222.235 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 146.428109 min 
2018-06-13T05:53:42.235Z,1528869222.235 [Default:CheckIn:E] Stopped
2018-06-13T05:53:42.235Z,1528869222.235 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T05:53:42.235Z,1528869222.235 [Default:CheckIn] Stopped
2018-06-13T05:53:42.236Z,1528869222.236 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T05:53:42.236Z,1528869222.236 [Default:CheckIn](INFO): Running loop #15
2018-06-13T05:53:42.236Z,1528869222.236 [Default:CheckIn] Running Loop=15
2018-06-13T05:53:42.236Z,1528869222.236 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T05:53:42.236Z,1528869222.236 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T05:53:42.419Z,1528869222.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:42.816Z,1528869222.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:43.221Z,1528869223.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:43.612Z,1528869223.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:44.032Z,1528869224.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:44.422Z,1528869224.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:44.822Z,1528869224.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:45.212Z,1528869225.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:45.618Z,1528869225.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:46.013Z,1528869226.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:46.413Z,1528869226.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:46.821Z,1528869226.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:47.229Z,1528869227.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:47.621Z,1528869227.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:48.016Z,1528869228.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:48.412Z,1528869228.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:48.816Z,1528869228.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:49.222Z,1528869229.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:49.612Z,1528869229.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:50.021Z,1528869230.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:50.425Z,1528869230.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:50.821Z,1528869230.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:51.216Z,1528869231.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:51.612Z,1528869231.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:52.016Z,1528869232.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:52.416Z,1528869232.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:52.826Z,1528869232.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:53.232Z,1528869233.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:53.629Z,1528869233.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:54.020Z,1528869234.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:54.425Z,1528869234.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:54.822Z,1528869234.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:55.225Z,1528869235.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:55.622Z,1528869235.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:56.026Z,1528869236.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:56.426Z,1528869236.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:56.828Z,1528869236.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:57.222Z,1528869237.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:57.626Z,1528869237.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:58.022Z,1528869238.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:58.423Z,1528869238.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:58.839Z,1528869238.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:59.236Z,1528869239.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:53:59.630Z,1528869239.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:00.007Z,1528869240.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:00.425Z,1528869240.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:00.809Z,1528869240.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:01.206Z,1528869241.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:01.610Z,1528869241.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:02.029Z,1528869242.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:02.435Z,1528869242.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:02.833Z,1528869242.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:03.210Z,1528869243.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:03.612Z,1528869243.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:04.007Z,1528869244.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:04.407Z,1528869244.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:04.836Z,1528869244.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:05.229Z,1528869245.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:05.629Z,1528869245.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:06.008Z,1528869246.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:06.410Z,1528869246.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:06.810Z,1528869246.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:07.210Z,1528869247.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:07.633Z,1528869247.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:08.032Z,1528869248.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:08.436Z,1528869248.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:08.829Z,1528869248.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:09.210Z,1528869249.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:09.610Z,1528869249.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:10.012Z,1528869250.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:10.414Z,1528869250.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:10.839Z,1528869250.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:11.241Z,1528869251.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:11.620Z,1528869251.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:12.016Z,1528869252.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:12.414Z,1528869252.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:12.818Z,1528869252.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:13.216Z,1528869253.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:13.616Z,1528869253.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:14.019Z,1528869254.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:14.423Z,1528869254.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:14.815Z,1528869254.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:15.231Z,1528869255.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:15.615Z,1528869255.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:16.043Z,1528869256.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:16.444Z,1528869256.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:16.821Z,1528869256.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:17.225Z,1528869257.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:17.643Z,1528869257.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:18.025Z,1528869258.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:18.413Z,1528869258.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:18.818Z,1528869258.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:19.222Z,1528869259.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:19.613Z,1528869259.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:20.028Z,1528869260.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:20.422Z,1528869260.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:20.847Z,1528869260.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:21.226Z,1528869261.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:21.615Z,1528869261.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:22.013Z,1528869262.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:22.428Z,1528869262.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:22.827Z,1528869262.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:23.249Z,1528869263.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:23.623Z,1528869263.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:24.025Z,1528869264.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:24.415Z,1528869264.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:24.817Z,1528869264.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:25.216Z,1528869265.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:25.627Z,1528869265.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:26.026Z,1528869266.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:26.427Z,1528869266.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:26.852Z,1528869266.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:27.230Z,1528869267.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:27.620Z,1528869267.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:28.014Z,1528869268.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:28.416Z,1528869268.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:28.848Z,1528869268.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:29.228Z,1528869269.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:29.628Z,1528869269.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:30.016Z,1528869270.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:30.428Z,1528869270.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:30.828Z,1528869270.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:31.227Z,1528869271.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:31.628Z,1528869271.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:32.048Z,1528869272.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:32.411Z,1528869272.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:32.822Z,1528869272.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:33.225Z,1528869273.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:33.649Z,1528869273.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:34.017Z,1528869274.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:34.417Z,1528869274.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:34.827Z,1528869274.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:35.248Z,1528869275.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:35.623Z,1528869275.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:36.014Z,1528869276.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:36.417Z,1528869276.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:36.824Z,1528869276.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:37.227Z,1528869277.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:37.630Z,1528869277.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:38.016Z,1528869278.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:38.412Z,1528869278.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:38.820Z,1528869278.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:39.228Z,1528869279.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:42.412Z,1528869282.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:42.564Z,1528869282.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:42.960Z,1528869282.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:43.355Z,1528869283.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:43.752Z,1528869283.752 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:43.752Z,1528869283.752 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2018-06-13T05:54:43.752Z,1528869283.752 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:54:43.754Z,1528869283.754 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:43.754Z,1528869283.754 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50
2018-06-13T05:54:43.755Z,1528869283.755 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:54:43.756Z,1528869283.756 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:43.756Z,1528869283.756 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2018-06-13T05:54:43.756Z,1528869283.756 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:54:43.842Z,1528869283.842 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:54:43.842Z,1528869283.842 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:54:43.843Z,1528869283.843 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:54:44.229Z,1528869284.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:54:44.229Z,1528869284.229 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2018-06-13T05:54:44.230Z,1528869284.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:54:44.230Z,1528869284.230 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50
2018-06-13T05:54:44.230Z,1528869284.230 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:54:44.231Z,1528869284.231 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2018-06-13T05:54:44.567Z,1528869284.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:54:44.567Z,1528869284.567 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:54:44.567Z,1528869284.567 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:54:44.568Z,1528869284.568 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:54:44.568Z,1528869284.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:54:44.568Z,1528869284.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:54:44.569Z,1528869284.569 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:54:44.569Z,1528869284.569 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:54:44.570Z,1528869284.570 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:54:44.975Z,1528869284.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:54:44.976Z,1528869284.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:45.343Z,1528869285.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:54:45.344Z,1528869285.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:45.743Z,1528869285.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:54:45.744Z,1528869285.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:46.143Z,1528869286.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:54:46.144Z,1528869286.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:46.552Z,1528869286.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:54:46.553Z,1528869286.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:46.955Z,1528869286.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:54:46.956Z,1528869286.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:47.354Z,1528869287.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:54:47.355Z,1528869287.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:47.751Z,1528869287.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:54:47.752Z,1528869287.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:48.147Z,1528869288.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:54:48.148Z,1528869288.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:48.544Z,1528869288.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:54:48.544Z,1528869288.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:48.945Z,1528869288.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:54:48.946Z,1528869288.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:49.346Z,1528869289.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:54:49.347Z,1528869289.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:49.765Z,1528869289.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:54:49.766Z,1528869289.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:50.151Z,1528869290.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:54:50.152Z,1528869290.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:50.555Z,1528869290.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:54:50.556Z,1528869290.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:50.951Z,1528869290.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:54:50.952Z,1528869290.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:51.352Z,1528869291.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:54:51.353Z,1528869291.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:51.746Z,1528869291.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:54:51.747Z,1528869291.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:52.143Z,1528869292.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:54:52.144Z,1528869292.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:52.547Z,1528869292.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:54:52.548Z,1528869292.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:52.954Z,1528869292.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:54:52.955Z,1528869292.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:53.354Z,1528869293.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:54:53.355Z,1528869293.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:53.751Z,1528869293.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:54:53.752Z,1528869293.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:54.145Z,1528869294.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:54:54.146Z,1528869294.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:54.544Z,1528869294.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:54:54.546Z,1528869294.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:54.945Z,1528869294.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:54:54.946Z,1528869294.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:55.347Z,1528869295.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:54:55.348Z,1528869295.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:55.743Z,1528869295.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:54:55.744Z,1528869295.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:56.151Z,1528869296.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:54:56.152Z,1528869296.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:56.555Z,1528869296.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T05:54:56.556Z,1528869296.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:56.951Z,1528869296.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T05:54:56.952Z,1528869296.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:57.345Z,1528869297.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T05:54:57.346Z,1528869297.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:57.745Z,1528869297.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:54:57.746Z,1528869297.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:58.143Z,1528869298.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:54:58.144Z,1528869298.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:58.545Z,1528869298.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:54:58.546Z,1528869298.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:58.950Z,1528869298.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:54:58.951Z,1528869298.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:59.351Z,1528869299.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:54:59.352Z,1528869299.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:54:59.751Z,1528869299.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:54:59.752Z,1528869299.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:00.146Z,1528869300.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:55:00.147Z,1528869300.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:00.544Z,1528869300.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:55:00.545Z,1528869300.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:00.945Z,1528869300.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:55:00.946Z,1528869300.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:01.348Z,1528869301.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:55:01.349Z,1528869301.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:01.745Z,1528869301.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:55:01.746Z,1528869301.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:02.151Z,1528869302.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:55:02.152Z,1528869302.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:02.554Z,1528869302.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:55:02.555Z,1528869302.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:02.951Z,1528869302.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:55:02.952Z,1528869302.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:03.352Z,1528869303.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:55:03.354Z,1528869303.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:03.747Z,1528869303.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T05:55:03.748Z,1528869303.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:04.156Z,1528869304.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:04.547Z,1528869304.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:04.955Z,1528869304.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:05.352Z,1528869305.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:05.780Z,1528869305.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:06.149Z,1528869306.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:06.546Z,1528869306.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:06.949Z,1528869306.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:07.349Z,1528869307.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:07.753Z,1528869307.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:08.153Z,1528869308.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:08.555Z,1528869308.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:08.952Z,1528869308.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:09.348Z,1528869309.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:09.747Z,1528869309.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:10.161Z,1528869310.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:10.556Z,1528869310.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:10.967Z,1528869310.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:11.356Z,1528869311.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:11.756Z,1528869311.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:12.150Z,1528869312.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:12.548Z,1528869312.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:12.949Z,1528869312.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:13.350Z,1528869313.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:13.756Z,1528869313.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:14.156Z,1528869314.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:14.561Z,1528869314.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:14.954Z,1528869314.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:15.356Z,1528869315.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:15.756Z,1528869315.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:16.152Z,1528869316.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:16.548Z,1528869316.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:16.967Z,1528869316.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:17.355Z,1528869317.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:17.763Z,1528869317.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:18.152Z,1528869318.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:18.556Z,1528869318.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:18.948Z,1528869318.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:19.351Z,1528869319.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:19.756Z,1528869319.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:20.161Z,1528869320.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:20.565Z,1528869320.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:20.960Z,1528869320.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:21.348Z,1528869321.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:21.755Z,1528869321.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:22.149Z,1528869322.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:22.556Z,1528869322.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:22.961Z,1528869322.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:23.356Z,1528869323.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:23.762Z,1528869323.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:24.156Z,1528869324.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:24.554Z,1528869324.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:24.952Z,1528869324.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:25.360Z,1528869325.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:25.750Z,1528869325.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:26.156Z,1528869326.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:26.564Z,1528869326.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:26.961Z,1528869326.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:27.348Z,1528869327.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:27.751Z,1528869327.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:28.152Z,1528869328.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:28.561Z,1528869328.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:28.961Z,1528869328.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:29.361Z,1528869329.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:29.759Z,1528869329.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:30.155Z,1528869330.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:30.555Z,1528869330.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:30.948Z,1528869330.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:31.366Z,1528869331.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:31.758Z,1528869331.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:32.162Z,1528869332.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:32.563Z,1528869332.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:32.957Z,1528869332.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:33.359Z,1528869333.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:33.760Z,1528869333.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:34.150Z,1528869334.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:34.560Z,1528869334.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:34.966Z,1528869334.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:35.366Z,1528869335.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:35.762Z,1528869335.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:36.163Z,1528869336.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:36.548Z,1528869336.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:36.947Z,1528869336.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:37.344Z,1528869337.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:37.748Z,1528869337.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:38.155Z,1528869338.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:38.580Z,1528869338.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:38.976Z,1528869338.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:39.351Z,1528869339.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:39.750Z,1528869339.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:40.153Z,1528869340.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:40.552Z,1528869340.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:43.680Z,1528869343.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:43.838Z,1528869343.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:44.243Z,1528869344.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:44.633Z,1528869344.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:45.030Z,1528869345.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:45.426Z,1528869345.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:45.810Z,1528869345.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:46.235Z,1528869346.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:46.641Z,1528869346.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:47.043Z,1528869347.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:47.412Z,1528869347.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:47.820Z,1528869347.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:48.218Z,1528869348.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:48.623Z,1528869348.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:49.024Z,1528869349.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:49.420Z,1528869349.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:49.820Z,1528869349.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:50.222Z,1528869350.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:50.616Z,1528869350.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:51.016Z,1528869351.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:51.417Z,1528869351.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:51.814Z,1528869351.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:52.224Z,1528869352.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:52.624Z,1528869352.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:53.028Z,1528869353.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:53.415Z,1528869353.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:53.816Z,1528869353.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:54.216Z,1528869354.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:54.626Z,1528869354.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:55.024Z,1528869355.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:55.424Z,1528869355.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:55.825Z,1528869355.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:56.225Z,1528869356.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:56.615Z,1528869356.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:57.019Z,1528869357.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:57.430Z,1528869357.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:57.815Z,1528869357.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:58.232Z,1528869358.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:58.632Z,1528869358.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:59.025Z,1528869359.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:59.415Z,1528869359.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:55:59.820Z,1528869359.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:00.220Z,1528869360.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:00.618Z,1528869360.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:01.025Z,1528869361.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:01.426Z,1528869361.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:01.830Z,1528869361.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:02.228Z,1528869362.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:02.620Z,1528869362.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:03.017Z,1528869363.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:03.422Z,1528869363.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:03.819Z,1528869363.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:04.230Z,1528869364.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:04.629Z,1528869364.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:05.040Z,1528869365.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:05.426Z,1528869365.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:05.808Z,1528869365.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:06.212Z,1528869366.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:06.630Z,1528869366.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:07.038Z,1528869367.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:07.438Z,1528869367.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:07.839Z,1528869367.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:08.226Z,1528869368.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:08.611Z,1528869368.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:09.012Z,1528869369.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:09.416Z,1528869369.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:09.816Z,1528869369.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:10.240Z,1528869370.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:10.643Z,1528869370.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:11.022Z,1528869371.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:11.419Z,1528869371.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:11.816Z,1528869371.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:12.216Z,1528869372.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:12.620Z,1528869372.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:13.020Z,1528869373.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:13.446Z,1528869373.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:13.828Z,1528869373.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:14.233Z,1528869374.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:14.617Z,1528869374.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:15.020Z,1528869375.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:15.420Z,1528869375.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:15.815Z,1528869375.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:16.231Z,1528869376.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:16.627Z,1528869376.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:17.029Z,1528869377.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:17.415Z,1528869377.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:17.830Z,1528869377.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:18.342Z,1528869378.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:18.620Z,1528869378.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:19.030Z,1528869379.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:19.434Z,1528869379.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:19.830Z,1528869379.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:20.220Z,1528869380.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:20.619Z,1528869380.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:21.036Z,1528869381.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:21.428Z,1528869381.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:21.819Z,1528869381.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:22.230Z,1528869382.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:22.633Z,1528869382.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:23.042Z,1528869383.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:23.420Z,1528869383.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:23.828Z,1528869383.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:24.225Z,1528869384.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:24.628Z,1528869384.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:25.026Z,1528869385.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:25.440Z,1528869385.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:25.835Z,1528869385.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:26.222Z,1528869386.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:26.624Z,1528869386.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:27.024Z,1528869387.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:27.423Z,1528869387.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:27.826Z,1528869387.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:28.236Z,1528869388.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:28.632Z,1528869388.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:29.048Z,1528869389.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:29.421Z,1528869389.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:29.840Z,1528869389.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:30.232Z,1528869390.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:30.626Z,1528869390.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:31.038Z,1528869391.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:31.448Z,1528869391.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:31.835Z,1528869391.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:32.243Z,1528869392.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:32.611Z,1528869392.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:33.040Z,1528869393.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:33.416Z,1528869393.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:33.841Z,1528869393.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:34.242Z,1528869394.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:34.642Z,1528869394.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:35.043Z,1528869395.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:35.439Z,1528869395.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:35.817Z,1528869395.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:36.218Z,1528869396.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:36.614Z,1528869396.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:37.048Z,1528869397.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:37.449Z,1528869397.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:37.820Z,1528869397.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:38.229Z,1528869398.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:38.639Z,1528869398.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:39.028Z,1528869399.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:39.450Z,1528869399.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:42.558Z,1528869402.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:42.700Z,1528869402.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:43.092Z,1528869403.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:43.509Z,1528869403.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:43.876Z,1528869403.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:44.304Z,1528869404.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:44.703Z,1528869404.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:45.102Z,1528869405.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:45.480Z,1528869405.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:45.879Z,1528869405.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:46.277Z,1528869406.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:46.685Z,1528869406.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:47.113Z,1528869407.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:47.487Z,1528869407.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:47.907Z,1528869407.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:48.284Z,1528869408.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:48.680Z,1528869408.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:49.084Z,1528869409.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:49.480Z,1528869409.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:49.888Z,1528869409.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:50.292Z,1528869410.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:50.690Z,1528869410.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:51.087Z,1528869411.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:51.491Z,1528869411.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:51.883Z,1528869411.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:52.287Z,1528869412.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:52.682Z,1528869412.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:53.055Z,1528869413.055 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T05:56:53.055Z,1528869413.055 [NAL9602] Data Fault, FailCount= 4
2018-06-13T05:56:53.055Z,1528869413.055 [NAL9602](ERROR): Data Fault
2018-06-13T05:56:53.089Z,1528869413.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:53.189Z,1528869413.189 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T05:56:53.443Z,1528869413.443 [NAL9602](INFO): Powering down
2018-06-13T05:56:53.488Z,1528869413.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:53.884Z,1528869413.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:54.281Z,1528869414.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:54.361Z,1528869414.361 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T05:56:54.361Z,1528869414.361 [NAL9602] No Fault, FailCount= 4
2018-06-13T05:56:54.681Z,1528869414.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:55.087Z,1528869415.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:55.481Z,1528869415.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:55.878Z,1528869415.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:56.295Z,1528869416.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:56.684Z,1528869416.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:57.082Z,1528869417.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:57.483Z,1528869417.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:57.883Z,1528869417.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:58.281Z,1528869418.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:58.686Z,1528869418.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:59.077Z,1528869419.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:59.482Z,1528869419.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:56:59.887Z,1528869419.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:00.281Z,1528869420.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:00.682Z,1528869420.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:01.086Z,1528869421.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:01.485Z,1528869421.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:01.884Z,1528869421.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:02.286Z,1528869422.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:02.683Z,1528869422.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:03.082Z,1528869423.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:03.486Z,1528869423.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:03.881Z,1528869423.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:04.282Z,1528869424.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:04.695Z,1528869424.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:05.080Z,1528869425.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:05.482Z,1528869425.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:05.887Z,1528869425.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:06.282Z,1528869426.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:06.682Z,1528869426.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:07.086Z,1528869427.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:07.500Z,1528869427.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:07.915Z,1528869427.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:08.286Z,1528869428.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:08.683Z,1528869428.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:09.100Z,1528869429.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:09.515Z,1528869429.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:09.886Z,1528869429.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:10.282Z,1528869430.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:10.715Z,1528869430.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:11.097Z,1528869431.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:11.487Z,1528869431.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:11.892Z,1528869431.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:12.289Z,1528869432.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:12.685Z,1528869432.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:13.100Z,1528869433.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:13.493Z,1528869433.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:13.896Z,1528869433.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:14.291Z,1528869434.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:14.682Z,1528869434.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:15.083Z,1528869435.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:15.496Z,1528869435.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:15.884Z,1528869435.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:16.284Z,1528869436.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:16.700Z,1528869436.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:17.094Z,1528869437.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:17.488Z,1528869437.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:17.896Z,1528869437.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:18.292Z,1528869438.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:18.697Z,1528869438.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:19.088Z,1528869439.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:19.488Z,1528869439.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:19.883Z,1528869439.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:20.300Z,1528869440.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:20.687Z,1528869440.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:21.083Z,1528869441.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:21.486Z,1528869441.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:21.894Z,1528869441.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:22.280Z,1528869442.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:22.686Z,1528869442.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:23.087Z,1528869443.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:23.500Z,1528869443.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:23.842Z,1528869443.842 [NAL9602](INFO): Powering up NAL9602
2018-06-13T05:57:23.902Z,1528869443.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:24.283Z,1528869444.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:24.683Z,1528869444.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:25.104Z,1528869445.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:25.484Z,1528869445.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:25.884Z,1528869445.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:26.292Z,1528869446.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:26.689Z,1528869446.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:27.078Z,1528869447.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:27.489Z,1528869447.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:27.887Z,1528869447.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:28.298Z,1528869448.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:28.691Z,1528869448.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:29.087Z,1528869449.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:29.483Z,1528869449.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:29.888Z,1528869449.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:30.282Z,1528869450.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:30.680Z,1528869450.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:31.092Z,1528869451.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:31.481Z,1528869451.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:31.878Z,1528869451.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:32.293Z,1528869452.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:32.688Z,1528869452.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:33.079Z,1528869453.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:33.488Z,1528869453.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:33.893Z,1528869453.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:34.284Z,1528869454.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:34.692Z,1528869454.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:35.042Z,1528869455.042 [NAL9602](INFO): NAL9602 initialized
2018-06-13T05:57:35.086Z,1528869455.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:35.479Z,1528869455.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:35.896Z,1528869455.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:36.296Z,1528869456.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:36.697Z,1528869456.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:37.084Z,1528869457.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:37.492Z,1528869457.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:37.880Z,1528869457.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:38.288Z,1528869458.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:38.695Z,1528869458.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:39.100Z,1528869459.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:39.500Z,1528869459.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:42.595Z,1528869462.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:42.753Z,1528869462.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:43.156Z,1528869463.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:43.545Z,1528869463.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:43.937Z,1528869463.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:44.335Z,1528869464.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:44.738Z,1528869464.738 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:44.738Z,1528869464.738 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2018-06-13T05:57:44.738Z,1528869464.738 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T05:57:44.740Z,1528869464.740 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:44.740Z,1528869464.740 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51
2018-06-13T05:57:44.740Z,1528869464.740 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T05:57:44.742Z,1528869464.742 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:44.742Z,1528869464.742 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2018-06-13T05:57:44.742Z,1528869464.742 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T05:57:44.821Z,1528869464.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T05:57:44.821Z,1528869464.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T05:57:44.822Z,1528869464.822 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T05:57:45.221Z,1528869465.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T05:57:45.221Z,1528869465.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2018-06-13T05:57:45.221Z,1528869465.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T05:57:45.221Z,1528869465.221 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51
2018-06-13T05:57:45.222Z,1528869465.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T05:57:45.222Z,1528869465.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2018-06-13T05:57:45.543Z,1528869465.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T05:57:45.543Z,1528869465.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:57:45.544Z,1528869465.544 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:57:45.544Z,1528869465.544 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T05:57:45.544Z,1528869465.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:57:45.545Z,1528869465.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:57:45.545Z,1528869465.545 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T05:57:45.546Z,1528869465.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T05:57:45.546Z,1528869465.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T05:57:45.943Z,1528869465.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T05:57:45.944Z,1528869465.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:46.344Z,1528869466.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T05:57:46.344Z,1528869466.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:46.740Z,1528869466.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T05:57:46.740Z,1528869466.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:47.140Z,1528869467.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T05:57:47.140Z,1528869467.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:47.544Z,1528869467.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T05:57:47.545Z,1528869467.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:47.952Z,1528869467.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T05:57:47.957Z,1528869467.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:48.341Z,1528869468.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T05:57:48.342Z,1528869468.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:48.731Z,1528869468.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T05:57:48.731Z,1528869468.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:49.151Z,1528869469.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T05:57:49.152Z,1528869469.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:49.550Z,1528869469.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T05:57:49.550Z,1528869469.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:49.944Z,1528869469.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T05:57:49.945Z,1528869469.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:50.343Z,1528869470.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T05:57:50.344Z,1528869470.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:50.751Z,1528869470.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T05:57:50.752Z,1528869470.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:51.142Z,1528869471.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T05:57:51.143Z,1528869471.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:51.548Z,1528869471.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T05:57:51.549Z,1528869471.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:51.950Z,1528869471.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T05:57:51.951Z,1528869471.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:52.356Z,1528869472.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T05:57:52.356Z,1528869472.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:52.721Z,1528869472.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T05:57:52.722Z,1528869472.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:53.127Z,1528869473.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T05:57:53.128Z,1528869473.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:53.530Z,1528869473.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T05:57:53.531Z,1528869473.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:53.956Z,1528869473.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T05:57:53.956Z,1528869473.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:54.351Z,1528869474.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T05:57:54.351Z,1528869474.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:54.732Z,1528869474.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T05:57:54.733Z,1528869474.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:55.131Z,1528869475.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T05:57:55.131Z,1528869475.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:55.556Z,1528869475.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T05:57:55.557Z,1528869475.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:55.934Z,1528869475.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T05:57:55.936Z,1528869475.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:56.333Z,1528869476.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T05:57:56.334Z,1528869476.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:56.725Z,1528869476.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T05:57:56.726Z,1528869476.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:57.127Z,1528869477.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T05:57:57.128Z,1528869477.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:57.538Z,1528869477.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T05:57:57.540Z,1528869477.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:57.936Z,1528869477.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T05:57:57.937Z,1528869477.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:58.336Z,1528869478.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T05:57:58.336Z,1528869478.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:58.760Z,1528869478.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T05:57:58.765Z,1528869478.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:59.123Z,1528869479.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T05:57:59.124Z,1528869479.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:59.542Z,1528869479.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T05:57:59.543Z,1528869479.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:57:59.931Z,1528869479.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T05:57:59.932Z,1528869479.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:00.320Z,1528869480.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T05:58:00.321Z,1528869480.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:00.733Z,1528869480.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T05:58:00.734Z,1528869480.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:01.144Z,1528869481.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T05:58:01.146Z,1528869481.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:01.537Z,1528869481.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T05:58:01.538Z,1528869481.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:01.943Z,1528869481.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T05:58:01.944Z,1528869481.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:02.323Z,1528869482.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T05:58:02.324Z,1528869482.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:02.726Z,1528869482.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T05:58:02.727Z,1528869482.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:03.130Z,1528869483.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T05:58:03.131Z,1528869483.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:03.523Z,1528869483.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T05:58:03.524Z,1528869483.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:03.933Z,1528869483.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T05:58:03.934Z,1528869483.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:04.342Z,1528869484.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T05:58:04.343Z,1528869484.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:04.737Z,1528869484.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T05:58:04.738Z,1528869484.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:05.122Z,1528869485.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:05.530Z,1528869485.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:05.924Z,1528869485.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:06.336Z,1528869486.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:06.734Z,1528869486.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:07.133Z,1528869487.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:07.539Z,1528869487.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:07.935Z,1528869487.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:08.316Z,1528869488.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:08.716Z,1528869488.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:09.117Z,1528869489.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:09.520Z,1528869489.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:09.926Z,1528869489.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:10.330Z,1528869490.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:10.727Z,1528869490.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:11.124Z,1528869491.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:11.522Z,1528869491.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:11.921Z,1528869491.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:12.324Z,1528869492.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:12.731Z,1528869492.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:13.131Z,1528869493.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:13.527Z,1528869493.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:13.928Z,1528869493.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:14.322Z,1528869494.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:14.719Z,1528869494.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:15.121Z,1528869495.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:15.522Z,1528869495.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:15.927Z,1528869495.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:16.331Z,1528869496.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:16.732Z,1528869496.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:17.119Z,1528869497.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:17.523Z,1528869497.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:17.924Z,1528869497.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:18.324Z,1528869498.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:18.732Z,1528869498.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:19.130Z,1528869499.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:19.532Z,1528869499.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:19.922Z,1528869499.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:20.323Z,1528869500.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:20.719Z,1528869500.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:21.128Z,1528869501.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:21.521Z,1528869501.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:21.928Z,1528869501.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:22.332Z,1528869502.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:22.727Z,1528869502.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:23.120Z,1528869503.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:23.522Z,1528869503.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:23.924Z,1528869503.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:24.323Z,1528869504.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:24.731Z,1528869504.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:25.136Z,1528869505.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:25.536Z,1528869505.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:25.923Z,1528869505.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:26.323Z,1528869506.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:26.723Z,1528869506.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:27.123Z,1528869507.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:27.523Z,1528869507.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:27.931Z,1528869507.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:28.331Z,1528869508.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:28.731Z,1528869508.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:29.119Z,1528869509.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:29.522Z,1528869509.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:29.935Z,1528869509.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:30.324Z,1528869510.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:30.736Z,1528869510.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:31.130Z,1528869511.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:31.533Z,1528869511.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:31.923Z,1528869511.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:32.324Z,1528869512.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:32.725Z,1528869512.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:33.128Z,1528869513.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:33.527Z,1528869513.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:33.933Z,1528869513.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:34.336Z,1528869514.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:34.734Z,1528869514.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:35.125Z,1528869515.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:35.522Z,1528869515.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:35.926Z,1528869515.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:36.320Z,1528869516.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:36.730Z,1528869516.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:37.136Z,1528869517.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:37.533Z,1528869517.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:37.922Z,1528869517.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:38.324Z,1528869518.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:38.723Z,1528869518.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:39.123Z,1528869519.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:39.528Z,1528869519.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:39.932Z,1528869519.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:40.336Z,1528869520.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:40.736Z,1528869520.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:43.831Z,1528869523.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:43.834Z,1528869523.834 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T05:53:42.2Z
2018-06-13T05:58:43.834Z,1528869523.834 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T05:58:43.834Z,1528869523.834 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T05:58:44.015Z,1528869524.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:45.135Z,1528869525.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:45.292Z,1528869525.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:45.688Z,1528869525.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:46.080Z,1528869526.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:46.484Z,1528869526.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:46.876Z,1528869526.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:47.279Z,1528869527.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:50.476Z,1528869530.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:50.565Z,1528869530.565 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0060.lzma
2018-06-13T05:58:50.659Z,1528869530.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:51.030Z,1528869531.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:51.428Z,1528869531.428 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0060.lzma.bak
2018-06-13T05:58:51.429Z,1528869531.429 [DataOverHttps](INFO): SBD MOMSN=8328694
2018-06-13T05:58:51.619Z,1528869531.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:53.317Z,1528869533.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:53.471Z,1528869533.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:57.113Z,1528869537.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:57.366Z,1528869537.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:57.680Z,1528869537.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:58.197Z,1528869538.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:58.467Z,1528869538.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:58.861Z,1528869538.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:59.262Z,1528869539.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:58:59.670Z,1528869539.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:00.069Z,1528869540.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:03.363Z,1528869543.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:03.456Z,1528869543.456 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0061.lzma
2018-06-13T05:59:03.523Z,1528869543.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:03.908Z,1528869543.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:04.258Z,1528869544.258 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0061.lzma.bak
2018-06-13T05:59:04.258Z,1528869544.258 [DataOverHttps](INFO): SBD MOMSN=8328696
2018-06-13T05:59:04.318Z,1528869544.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:06.208Z,1528869546.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:06.211Z,1528869546.211 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T05:59:06.211Z,1528869546.211 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T05:59:06.211Z,1528869546.211 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T05:59:06.388Z,1528869546.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:06.772Z,1528869546.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:09.929Z,1528869549.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:10.073Z,1528869550.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:10.488Z,1528869550.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:10.882Z,1528869550.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:11.278Z,1528869551.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:11.668Z,1528869551.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:12.071Z,1528869552.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:12.484Z,1528869552.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:12.902Z,1528869552.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:13.285Z,1528869553.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:13.676Z,1528869553.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:14.077Z,1528869554.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:14.471Z,1528869554.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:14.870Z,1528869554.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:15.268Z,1528869555.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:15.692Z,1528869555.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:16.105Z,1528869556.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:16.488Z,1528869556.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:16.879Z,1528869556.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:17.280Z,1528869557.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:17.688Z,1528869557.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:18.085Z,1528869558.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:18.475Z,1528869558.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:18.881Z,1528869558.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:19.270Z,1528869559.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:19.677Z,1528869559.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:20.088Z,1528869560.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:20.488Z,1528869560.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:20.871Z,1528869560.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:21.270Z,1528869561.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:21.684Z,1528869561.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:22.092Z,1528869562.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:22.492Z,1528869562.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:22.885Z,1528869562.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:23.284Z,1528869563.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:23.708Z,1528869563.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:24.082Z,1528869564.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:24.478Z,1528869564.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:24.872Z,1528869564.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:25.265Z,1528869565.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:25.665Z,1528869565.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:26.088Z,1528869566.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:26.482Z,1528869566.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:26.902Z,1528869566.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:27.269Z,1528869567.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:27.670Z,1528869567.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:28.070Z,1528869568.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:28.476Z,1528869568.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:28.874Z,1528869568.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:29.283Z,1528869569.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:29.681Z,1528869569.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:30.068Z,1528869570.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:30.469Z,1528869570.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:30.876Z,1528869570.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:31.270Z,1528869571.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:31.664Z,1528869571.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:32.090Z,1528869572.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:32.483Z,1528869572.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:32.878Z,1528869572.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:33.275Z,1528869573.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:33.668Z,1528869573.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:34.070Z,1528869574.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:34.456Z,1528869574.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:34.879Z,1528869574.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:35.287Z,1528869575.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:35.691Z,1528869575.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:36.055Z,1528869576.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:36.507Z,1528869576.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:36.964Z,1528869576.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:37.316Z,1528869577.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:37.687Z,1528869577.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:38.113Z,1528869578.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:38.471Z,1528869578.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:38.862Z,1528869578.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:39.280Z,1528869579.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:39.662Z,1528869579.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:40.072Z,1528869580.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:40.471Z,1528869580.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:40.875Z,1528869580.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:41.268Z,1528869581.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:41.677Z,1528869581.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:42.060Z,1528869582.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:42.468Z,1528869582.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:42.873Z,1528869582.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:43.280Z,1528869583.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:43.672Z,1528869583.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:44.064Z,1528869584.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:44.460Z,1528869584.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:44.863Z,1528869584.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:45.277Z,1528869585.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:45.668Z,1528869585.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:46.072Z,1528869586.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:46.478Z,1528869586.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:46.874Z,1528869586.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:47.264Z,1528869587.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:47.669Z,1528869587.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:48.065Z,1528869588.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:48.468Z,1528869588.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:48.877Z,1528869588.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:49.276Z,1528869589.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:49.674Z,1528869589.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:50.077Z,1528869590.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:50.468Z,1528869590.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:50.872Z,1528869590.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:51.280Z,1528869591.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:51.680Z,1528869591.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:52.082Z,1528869592.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:52.492Z,1528869592.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:52.883Z,1528869592.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:53.260Z,1528869593.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:53.661Z,1528869593.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:54.060Z,1528869594.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:54.460Z,1528869594.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:54.887Z,1528869594.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:55.271Z,1528869595.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:55.667Z,1528869595.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:56.063Z,1528869596.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:56.460Z,1528869596.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:56.863Z,1528869596.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:57.264Z,1528869597.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:57.662Z,1528869597.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:58.072Z,1528869598.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:58.477Z,1528869598.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:58.872Z,1528869598.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:59.264Z,1528869599.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T05:59:59.667Z,1528869599.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:00.061Z,1528869600.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:00.463Z,1528869600.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:00.872Z,1528869600.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:01.276Z,1528869601.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:01.671Z,1528869601.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:02.068Z,1528869602.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:02.461Z,1528869602.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:02.864Z,1528869602.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:03.266Z,1528869603.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:03.671Z,1528869603.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:04.076Z,1528869604.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:04.477Z,1528869604.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:04.870Z,1528869604.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:05.263Z,1528869605.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:05.668Z,1528869605.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:06.064Z,1528869606.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:06.472Z,1528869606.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:06.878Z,1528869606.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:09.983Z,1528869609.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:10.164Z,1528869610.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:10.533Z,1528869610.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:10.939Z,1528869610.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:11.337Z,1528869611.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:11.743Z,1528869611.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:12.140Z,1528869612.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:12.545Z,1528869612.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:12.942Z,1528869612.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:13.348Z,1528869613.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:13.740Z,1528869613.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:14.165Z,1528869614.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:14.544Z,1528869614.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:14.952Z,1528869614.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:15.338Z,1528869615.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:15.732Z,1528869615.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:16.149Z,1528869616.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:16.573Z,1528869616.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:16.948Z,1528869616.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:17.344Z,1528869617.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:17.751Z,1528869617.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:18.134Z,1528869618.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:18.536Z,1528869618.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:18.952Z,1528869618.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:19.348Z,1528869619.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:19.745Z,1528869619.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:20.136Z,1528869620.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:20.535Z,1528869620.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:20.948Z,1528869620.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:21.343Z,1528869621.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:21.744Z,1528869621.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:22.157Z,1528869622.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:22.555Z,1528869622.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:22.941Z,1528869622.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:23.337Z,1528869623.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:23.741Z,1528869623.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:24.138Z,1528869624.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:24.536Z,1528869624.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:24.950Z,1528869624.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:25.343Z,1528869625.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:25.753Z,1528869625.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:26.145Z,1528869626.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:26.542Z,1528869626.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:26.941Z,1528869626.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:27.346Z,1528869627.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:27.745Z,1528869627.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:28.152Z,1528869628.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:28.564Z,1528869628.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:28.943Z,1528869628.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:29.346Z,1528869629.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:29.745Z,1528869629.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:30.148Z,1528869630.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:30.529Z,1528869630.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:30.958Z,1528869630.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:31.357Z,1528869631.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:31.757Z,1528869631.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:32.133Z,1528869632.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:32.531Z,1528869632.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:32.931Z,1528869632.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:33.332Z,1528869633.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:33.729Z,1528869633.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:34.159Z,1528869634.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:34.543Z,1528869634.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:34.939Z,1528869634.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:35.334Z,1528869635.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:35.748Z,1528869635.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:36.133Z,1528869636.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:36.533Z,1528869636.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:36.943Z,1528869636.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:37.344Z,1528869637.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:37.744Z,1528869637.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:38.136Z,1528869638.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:38.532Z,1528869638.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:38.935Z,1528869638.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:39.337Z,1528869639.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:39.730Z,1528869639.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:40.143Z,1528869640.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:40.544Z,1528869640.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:40.941Z,1528869640.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:41.335Z,1528869641.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:41.735Z,1528869641.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:42.134Z,1528869642.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:42.535Z,1528869642.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:42.945Z,1528869642.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:43.343Z,1528869643.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:43.743Z,1528869643.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:44.136Z,1528869644.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:44.532Z,1528869644.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:44.934Z,1528869644.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:45.336Z,1528869645.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:45.732Z,1528869645.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:45.732Z,1528869645.732 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2018-06-13T06:00:45.732Z,1528869645.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:00:45.734Z,1528869645.734 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:45.734Z,1528869645.734 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52
2018-06-13T06:00:45.734Z,1528869645.734 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:00:45.736Z,1528869645.736 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:45.736Z,1528869645.736 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2018-06-13T06:00:45.736Z,1528869645.736 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:00:45.809Z,1528869645.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:00:45.809Z,1528869645.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:00:45.810Z,1528869645.810 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:00:46.245Z,1528869646.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:00:46.245Z,1528869646.245 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2018-06-13T06:00:46.246Z,1528869646.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:00:46.246Z,1528869646.246 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52
2018-06-13T06:00:46.246Z,1528869646.246 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:00:46.246Z,1528869646.246 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2018-06-13T06:00:46.548Z,1528869646.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:00:46.548Z,1528869646.548 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:00:46.549Z,1528869646.549 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:00:46.549Z,1528869646.549 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:00:46.550Z,1528869646.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:00:46.550Z,1528869646.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:00:46.550Z,1528869646.550 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:00:46.551Z,1528869646.551 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:00:46.551Z,1528869646.551 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:00:46.944Z,1528869646.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:00:46.945Z,1528869646.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:47.335Z,1528869647.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:00:47.336Z,1528869647.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:47.747Z,1528869647.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:00:47.748Z,1528869647.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:48.142Z,1528869648.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:00:48.142Z,1528869648.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:48.536Z,1528869648.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:00:48.537Z,1528869648.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:48.951Z,1528869648.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:00:48.952Z,1528869648.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:49.348Z,1528869649.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:00:49.349Z,1528869649.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:49.761Z,1528869649.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:00:49.762Z,1528869649.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:50.141Z,1528869650.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:00:50.142Z,1528869650.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:50.552Z,1528869650.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:00:50.557Z,1528869650.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:50.933Z,1528869650.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:00:50.934Z,1528869650.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:51.332Z,1528869651.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:00:51.334Z,1528869651.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:51.731Z,1528869651.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:00:51.732Z,1528869651.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:52.143Z,1528869652.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:00:52.144Z,1528869652.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:52.543Z,1528869652.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:00:52.544Z,1528869652.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:52.948Z,1528869652.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:00:52.949Z,1528869652.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:53.336Z,1528869653.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:00:53.337Z,1528869653.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:53.736Z,1528869653.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:00:53.737Z,1528869653.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:54.133Z,1528869654.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:00:54.134Z,1528869654.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:54.536Z,1528869654.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:00:54.536Z,1528869654.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:54.947Z,1528869654.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:00:54.948Z,1528869654.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:55.348Z,1528869655.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:00:55.349Z,1528869655.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:55.744Z,1528869655.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:00:55.746Z,1528869655.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:56.135Z,1528869656.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:00:56.136Z,1528869656.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:56.533Z,1528869656.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:00:56.534Z,1528869656.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:56.944Z,1528869656.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:00:56.945Z,1528869656.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:57.335Z,1528869657.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:00:57.336Z,1528869657.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:57.733Z,1528869657.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:00:57.734Z,1528869657.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:58.152Z,1528869658.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:00:58.157Z,1528869658.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:58.550Z,1528869658.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:00:58.551Z,1528869658.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:58.952Z,1528869658.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:00:58.953Z,1528869658.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:59.344Z,1528869659.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:00:59.345Z,1528869659.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:00:59.728Z,1528869659.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:00:59.749Z,1528869659.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:00.132Z,1528869660.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:01:00.149Z,1528869660.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:00.536Z,1528869660.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:01:00.557Z,1528869660.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:00.966Z,1528869660.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:01:00.967Z,1528869660.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:01.361Z,1528869661.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:01:01.362Z,1528869661.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:01.762Z,1528869661.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:01:01.763Z,1528869661.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:02.131Z,1528869662.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:01:02.131Z,1528869662.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:02.529Z,1528869662.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:01:02.530Z,1528869662.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:02.931Z,1528869662.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:01:02.932Z,1528869662.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:03.331Z,1528869663.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:01:03.332Z,1528869663.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:03.740Z,1528869663.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:01:03.741Z,1528869663.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:04.139Z,1528869664.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:01:04.139Z,1528869664.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:04.542Z,1528869664.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:01:04.543Z,1528869664.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:04.939Z,1528869664.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:01:04.940Z,1528869664.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:05.336Z,1528869665.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:01:05.338Z,1528869665.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:05.733Z,1528869665.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:06.140Z,1528869666.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:06.535Z,1528869666.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:06.969Z,1528869666.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:10.061Z,1528869670.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:10.230Z,1528869670.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:10.600Z,1528869670.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:11.000Z,1528869671.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:11.404Z,1528869671.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:11.795Z,1528869671.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:12.205Z,1528869672.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:12.607Z,1528869672.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:13.012Z,1528869673.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:13.399Z,1528869673.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:13.798Z,1528869673.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:14.202Z,1528869674.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:14.599Z,1528869674.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:15.005Z,1528869675.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:15.412Z,1528869675.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:15.808Z,1528869675.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:16.209Z,1528869676.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:16.599Z,1528869676.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:17.006Z,1528869677.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:17.409Z,1528869677.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:17.799Z,1528869677.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:18.220Z,1528869678.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:18.616Z,1528869678.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:19.013Z,1528869679.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:19.399Z,1528869679.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:19.813Z,1528869679.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:20.205Z,1528869680.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:20.601Z,1528869680.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:21.016Z,1528869681.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:21.420Z,1528869681.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:21.820Z,1528869681.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:22.204Z,1528869682.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:22.598Z,1528869682.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:23.005Z,1528869683.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:23.402Z,1528869683.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:23.804Z,1528869683.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:24.210Z,1528869684.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:24.620Z,1528869684.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:25.010Z,1528869685.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:25.404Z,1528869685.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:25.802Z,1528869685.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:26.205Z,1528869686.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:26.605Z,1528869686.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:27.010Z,1528869687.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:27.420Z,1528869687.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:27.816Z,1528869687.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:28.205Z,1528869688.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:28.611Z,1528869688.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:29.005Z,1528869689.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:29.401Z,1528869689.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:29.803Z,1528869689.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:30.210Z,1528869690.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:30.614Z,1528869690.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:31.020Z,1528869691.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:31.401Z,1528869691.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:31.800Z,1528869691.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:32.204Z,1528869692.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:32.602Z,1528869692.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:33.010Z,1528869693.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:33.416Z,1528869693.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:33.810Z,1528869693.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:34.212Z,1528869694.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:34.605Z,1528869694.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:35.007Z,1528869695.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:35.407Z,1528869695.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:35.811Z,1528869695.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:36.216Z,1528869696.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:36.615Z,1528869696.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:37.015Z,1528869697.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:37.408Z,1528869697.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:37.801Z,1528869697.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:38.205Z,1528869698.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:38.601Z,1528869698.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:39.016Z,1528869699.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:39.416Z,1528869699.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:39.810Z,1528869699.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:40.201Z,1528869700.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:40.609Z,1528869700.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:41.005Z,1528869701.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:41.412Z,1528869701.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:41.813Z,1528869701.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:42.216Z,1528869702.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:42.627Z,1528869702.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:43.019Z,1528869703.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:43.413Z,1528869703.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:43.817Z,1528869703.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:44.211Z,1528869704.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:44.613Z,1528869704.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:45.022Z,1528869705.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:45.428Z,1528869705.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:45.823Z,1528869705.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:46.202Z,1528869706.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:46.596Z,1528869706.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:47.001Z,1528869707.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:47.401Z,1528869707.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:47.801Z,1528869707.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:48.232Z,1528869708.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:48.628Z,1528869708.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:49.032Z,1528869709.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:49.394Z,1528869709.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:49.799Z,1528869709.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:50.200Z,1528869710.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:50.596Z,1528869710.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:51.005Z,1528869711.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:51.408Z,1528869711.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:51.805Z,1528869711.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:52.198Z,1528869712.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:52.600Z,1528869712.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:52.996Z,1528869712.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:53.400Z,1528869713.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:53.801Z,1528869713.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:54.204Z,1528869714.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:54.612Z,1528869714.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:55.012Z,1528869715.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:55.399Z,1528869715.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:55.801Z,1528869715.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:56.202Z,1528869716.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:56.599Z,1528869716.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:57.005Z,1528869717.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:57.412Z,1528869717.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:57.804Z,1528869717.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:58.202Z,1528869718.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:58.601Z,1528869718.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:58.996Z,1528869718.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:59.400Z,1528869719.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:01:59.804Z,1528869719.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:00.216Z,1528869720.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:00.620Z,1528869720.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:01.014Z,1528869721.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:01.397Z,1528869721.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:01.799Z,1528869721.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:02.209Z,1528869722.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:02.601Z,1528869722.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:03.010Z,1528869723.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:03.415Z,1528869723.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:03.806Z,1528869723.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:04.200Z,1528869724.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:04.604Z,1528869724.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:05.000Z,1528869725.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:05.405Z,1528869725.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:05.817Z,1528869725.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:06.226Z,1528869726.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:06.620Z,1528869726.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:07.024Z,1528869727.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:07.403Z,1528869727.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:07.803Z,1528869727.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:08.206Z,1528869728.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:11.306Z,1528869731.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:11.473Z,1528869731.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:11.855Z,1528869731.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:12.258Z,1528869732.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:12.652Z,1528869732.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:13.057Z,1528869733.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:13.430Z,1528869733.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:13.831Z,1528869733.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:14.256Z,1528869734.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:14.654Z,1528869734.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:15.047Z,1528869735.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:15.433Z,1528869735.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:15.829Z,1528869735.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:16.235Z,1528869736.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:16.633Z,1528869736.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:17.039Z,1528869737.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:17.458Z,1528869737.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:17.843Z,1528869737.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:18.244Z,1528869738.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:18.640Z,1528869738.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:19.044Z,1528869739.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:19.432Z,1528869739.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:19.845Z,1528869739.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:20.244Z,1528869740.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:20.641Z,1528869740.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:21.042Z,1528869741.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:21.437Z,1528869741.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:21.832Z,1528869741.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:22.246Z,1528869742.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:22.645Z,1528869742.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:23.046Z,1528869743.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:23.446Z,1528869743.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:23.846Z,1528869743.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:24.236Z,1528869744.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:24.638Z,1528869744.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:25.048Z,1528869745.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:25.435Z,1528869745.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:25.839Z,1528869745.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:26.256Z,1528869746.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:26.656Z,1528869746.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:27.058Z,1528869747.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:27.454Z,1528869747.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:27.838Z,1528869747.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:28.237Z,1528869748.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:28.641Z,1528869748.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:29.048Z,1528869749.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:29.448Z,1528869749.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:29.851Z,1528869749.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:30.242Z,1528869750.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:30.641Z,1528869750.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:31.047Z,1528869751.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:31.438Z,1528869751.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:31.837Z,1528869751.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:32.250Z,1528869752.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:32.646Z,1528869752.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:33.043Z,1528869753.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:33.444Z,1528869753.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:33.837Z,1528869753.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:34.240Z,1528869754.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:34.640Z,1528869754.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:35.043Z,1528869755.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:35.451Z,1528869755.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:35.850Z,1528869755.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:36.237Z,1528869756.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:36.637Z,1528869756.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:37.040Z,1528869757.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:37.439Z,1528869757.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:37.836Z,1528869757.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:38.254Z,1528869758.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:38.649Z,1528869758.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:39.047Z,1528869759.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:39.454Z,1528869759.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:39.838Z,1528869759.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:40.242Z,1528869760.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:40.647Z,1528869760.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:41.045Z,1528869761.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:41.449Z,1528869761.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:41.850Z,1528869761.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:42.243Z,1528869762.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:42.637Z,1528869762.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:43.043Z,1528869763.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:43.438Z,1528869763.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:43.836Z,1528869763.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:44.251Z,1528869764.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:44.645Z,1528869764.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:45.044Z,1528869765.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:45.440Z,1528869765.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:45.837Z,1528869765.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:46.238Z,1528869766.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:46.640Z,1528869766.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:47.046Z,1528869767.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:47.447Z,1528869767.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:47.851Z,1528869767.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:48.245Z,1528869768.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:48.641Z,1528869768.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:49.052Z,1528869769.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:49.446Z,1528869769.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:49.829Z,1528869769.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:50.250Z,1528869770.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:50.660Z,1528869770.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:51.060Z,1528869771.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:51.447Z,1528869771.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:51.833Z,1528869771.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:52.234Z,1528869772.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:52.634Z,1528869772.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:53.063Z,1528869773.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:53.463Z,1528869773.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:53.844Z,1528869773.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:54.239Z,1528869774.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:54.645Z,1528869774.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:55.045Z,1528869775.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:55.445Z,1528869775.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:55.868Z,1528869775.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:56.242Z,1528869776.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:56.635Z,1528869776.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:57.051Z,1528869777.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:57.447Z,1528869777.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:57.843Z,1528869777.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:58.246Z,1528869778.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:58.650Z,1528869778.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:59.045Z,1528869779.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:59.451Z,1528869779.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:02:59.846Z,1528869779.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:00.241Z,1528869780.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:00.644Z,1528869780.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:01.050Z,1528869781.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:01.449Z,1528869781.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:01.848Z,1528869781.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:02.251Z,1528869782.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:02.641Z,1528869782.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:03.047Z,1528869783.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:03.454Z,1528869783.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:03.852Z,1528869783.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:04.251Z,1528869784.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:04.653Z,1528869784.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:05.055Z,1528869785.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:05.452Z,1528869785.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:05.860Z,1528869785.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:06.247Z,1528869786.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:06.634Z,1528869786.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:07.056Z,1528869787.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:10.160Z,1528869790.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:10.328Z,1528869790.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:10.708Z,1528869790.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:11.106Z,1528869791.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:11.498Z,1528869791.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:11.888Z,1528869791.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:12.315Z,1528869792.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:12.712Z,1528869792.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:13.113Z,1528869793.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:13.484Z,1528869793.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:13.892Z,1528869793.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:14.288Z,1528869794.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:14.696Z,1528869794.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:15.116Z,1528869795.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:15.522Z,1528869795.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:15.916Z,1528869795.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:16.291Z,1528869796.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:16.691Z,1528869796.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:17.093Z,1528869797.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:17.496Z,1528869797.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:17.887Z,1528869797.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:18.317Z,1528869798.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:18.716Z,1528869798.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:19.119Z,1528869799.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:19.491Z,1528869799.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:19.896Z,1528869799.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:20.291Z,1528869800.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:20.692Z,1528869800.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:21.119Z,1528869801.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:21.518Z,1528869801.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:21.916Z,1528869801.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:22.292Z,1528869802.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:22.691Z,1528869802.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:23.096Z,1528869803.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:23.492Z,1528869803.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:23.892Z,1528869803.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:24.316Z,1528869804.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:24.713Z,1528869804.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:25.119Z,1528869805.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:25.491Z,1528869805.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:25.892Z,1528869805.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:26.292Z,1528869806.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:26.696Z,1528869806.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:27.116Z,1528869807.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:27.517Z,1528869807.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:27.916Z,1528869807.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:28.292Z,1528869808.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:28.688Z,1528869808.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:29.092Z,1528869809.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:29.493Z,1528869809.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:29.891Z,1528869809.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:30.316Z,1528869810.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:30.713Z,1528869810.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:31.117Z,1528869811.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:31.496Z,1528869811.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:31.892Z,1528869811.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:32.320Z,1528869812.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:32.693Z,1528869812.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:33.116Z,1528869813.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:33.514Z,1528869813.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:33.916Z,1528869813.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:34.296Z,1528869814.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:34.691Z,1528869814.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:35.116Z,1528869815.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:35.517Z,1528869815.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:35.918Z,1528869815.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:36.316Z,1528869816.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:36.692Z,1528869816.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:37.116Z,1528869817.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:37.520Z,1528869817.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:37.903Z,1528869817.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:38.293Z,1528869818.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:38.692Z,1528869818.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:39.103Z,1528869819.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:39.525Z,1528869819.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:39.903Z,1528869819.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:40.297Z,1528869820.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:40.694Z,1528869820.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:41.095Z,1528869821.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:41.503Z,1528869821.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:41.926Z,1528869821.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:42.295Z,1528869822.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:42.700Z,1528869822.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:43.127Z,1528869823.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:43.499Z,1528869823.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:43.900Z,1528869823.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:44.297Z,1528869824.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:44.694Z,1528869824.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:45.124Z,1528869825.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:45.504Z,1528869825.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:45.893Z,1528869825.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:46.294Z,1528869826.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:46.695Z,1528869826.695 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:46.695Z,1528869826.695 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2018-06-13T06:03:46.695Z,1528869826.695 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:03:46.697Z,1528869826.697 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:46.697Z,1528869826.697 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53
2018-06-13T06:03:46.697Z,1528869826.697 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:03:46.699Z,1528869826.699 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:46.699Z,1528869826.699 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2018-06-13T06:03:46.699Z,1528869826.699 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:03:46.781Z,1528869826.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:03:46.781Z,1528869826.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:03:46.781Z,1528869826.781 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:03:47.173Z,1528869827.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:03:47.173Z,1528869827.173 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2018-06-13T06:03:47.174Z,1528869827.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:03:47.174Z,1528869827.174 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53
2018-06-13T06:03:47.174Z,1528869827.174 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:03:47.174Z,1528869827.174 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2018-06-13T06:03:47.501Z,1528869827.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:03:47.502Z,1528869827.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:03:47.502Z,1528869827.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:03:47.503Z,1528869827.503 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:03:47.503Z,1528869827.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:03:47.503Z,1528869827.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:03:47.504Z,1528869827.504 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:03:47.504Z,1528869827.504 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:03:47.504Z,1528869827.504 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:03:47.915Z,1528869827.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:03:47.916Z,1528869827.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:48.297Z,1528869828.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:03:48.298Z,1528869828.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:48.696Z,1528869828.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:03:48.697Z,1528869828.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:49.116Z,1528869829.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:03:49.117Z,1528869829.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:49.507Z,1528869829.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:03:49.508Z,1528869829.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:49.906Z,1528869829.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:03:49.907Z,1528869829.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:50.302Z,1528869830.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:03:50.303Z,1528869830.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:50.702Z,1528869830.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:03:50.703Z,1528869830.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:51.106Z,1528869831.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:03:51.107Z,1528869831.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:51.519Z,1528869831.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:03:51.520Z,1528869831.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:51.903Z,1528869831.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:03:51.904Z,1528869831.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:52.304Z,1528869832.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:03:52.309Z,1528869832.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:52.712Z,1528869832.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:03:52.713Z,1528869832.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:53.106Z,1528869833.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:03:53.107Z,1528869833.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:53.510Z,1528869833.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:03:53.511Z,1528869833.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:53.915Z,1528869833.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:03:53.915Z,1528869833.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:54.284Z,1528869834.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:03:54.286Z,1528869834.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:54.692Z,1528869834.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:03:54.713Z,1528869834.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:55.117Z,1528869835.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:03:55.118Z,1528869835.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:55.514Z,1528869835.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:03:55.515Z,1528869835.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:55.917Z,1528869835.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:03:55.918Z,1528869835.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:56.293Z,1528869836.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:03:56.294Z,1528869836.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:56.688Z,1528869836.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:03:56.689Z,1528869836.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:57.115Z,1528869837.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:03:57.116Z,1528869837.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:57.503Z,1528869837.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:03:57.503Z,1528869837.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:57.899Z,1528869837.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:03:57.900Z,1528869837.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:58.293Z,1528869838.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:03:58.294Z,1528869838.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:58.696Z,1528869838.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:03:58.697Z,1528869838.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:59.100Z,1528869839.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:03:59.101Z,1528869839.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:59.502Z,1528869839.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:03:59.503Z,1528869839.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:03:59.903Z,1528869839.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:03:59.904Z,1528869839.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:00.295Z,1528869840.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:04:00.296Z,1528869840.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:00.695Z,1528869840.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:04:00.696Z,1528869840.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:01.103Z,1528869841.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:04:01.104Z,1528869841.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:01.502Z,1528869841.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:04:01.503Z,1528869841.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:01.904Z,1528869841.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:04:01.905Z,1528869841.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:02.296Z,1528869842.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:04:02.297Z,1528869842.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:02.692Z,1528869842.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:04:02.693Z,1528869842.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:03.104Z,1528869843.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:04:03.105Z,1528869843.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:03.503Z,1528869843.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:04:03.504Z,1528869843.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:03.899Z,1528869843.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:04:03.900Z,1528869843.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:04.296Z,1528869844.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:04:04.297Z,1528869844.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:04.704Z,1528869844.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:04:04.710Z,1528869844.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:05.108Z,1528869845.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:04:05.109Z,1528869845.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:05.508Z,1528869845.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:04:05.509Z,1528869845.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:05.904Z,1528869845.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:04:05.905Z,1528869845.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:06.295Z,1528869846.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:04:06.296Z,1528869846.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:06.698Z,1528869846.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:06.701Z,1528869846.701 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T06:04:06.701Z,1528869846.701 [Default:CheckIn:C.Wait] Stopped
2018-06-13T06:04:06.702Z,1528869846.702 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T06:04:06.702Z,1528869846.702 [Default:CheckIn:D] Running Loop=1
2018-06-13T06:04:07.116Z,1528869847.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:07.119Z,1528869847.119 [Default:CheckIn:D] Stopped
2018-06-13T06:04:07.119Z,1528869847.119 [Default:CheckIn:E] Running Loop=1
2018-06-13T06:04:10.224Z,1528869850.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:10.250Z,1528869850.250 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 156.894564 min 
2018-06-13T06:04:10.251Z,1528869850.251 [Default:CheckIn:E] Stopped
2018-06-13T06:04:10.251Z,1528869850.251 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T06:04:10.251Z,1528869850.251 [Default:CheckIn] Stopped
2018-06-13T06:04:10.251Z,1528869850.251 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T06:04:10.251Z,1528869850.251 [Default:CheckIn](INFO): Running loop #16
2018-06-13T06:04:10.251Z,1528869850.251 [Default:CheckIn] Running Loop=16
2018-06-13T06:04:10.251Z,1528869850.251 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T06:04:10.251Z,1528869850.251 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T06:04:10.440Z,1528869850.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:10.796Z,1528869850.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:11.197Z,1528869851.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:11.594Z,1528869851.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:11.996Z,1528869851.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:12.397Z,1528869852.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:12.801Z,1528869852.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:13.202Z,1528869853.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:13.593Z,1528869853.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:13.996Z,1528869853.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:14.398Z,1528869854.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:14.776Z,1528869854.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:15.202Z,1528869855.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:15.605Z,1528869855.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:16.006Z,1528869856.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:16.380Z,1528869856.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:16.781Z,1528869856.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:17.180Z,1528869857.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:17.586Z,1528869857.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:17.984Z,1528869857.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:18.391Z,1528869858.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:18.811Z,1528869858.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:19.195Z,1528869859.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:19.585Z,1528869859.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:19.983Z,1528869859.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:20.388Z,1528869860.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:20.783Z,1528869860.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:21.191Z,1528869861.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:21.595Z,1528869861.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:21.992Z,1528869861.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:22.385Z,1528869862.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:22.787Z,1528869862.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:23.184Z,1528869863.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:23.586Z,1528869863.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:23.987Z,1528869863.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:24.393Z,1528869864.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:24.795Z,1528869864.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:25.195Z,1528869865.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:25.592Z,1528869865.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:25.985Z,1528869865.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:26.400Z,1528869866.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:26.783Z,1528869866.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:27.192Z,1528869867.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:27.595Z,1528869867.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:27.989Z,1528869867.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:28.386Z,1528869868.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:28.787Z,1528869868.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:29.190Z,1528869869.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:29.620Z,1528869869.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:29.995Z,1528869869.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:30.386Z,1528869870.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:30.788Z,1528869870.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:31.200Z,1528869871.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:31.587Z,1528869871.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:31.988Z,1528869871.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:32.396Z,1528869872.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:32.796Z,1528869872.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:33.196Z,1528869873.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:33.588Z,1528869873.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:33.986Z,1528869873.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:34.387Z,1528869874.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:34.809Z,1528869874.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:35.193Z,1528869875.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:35.599Z,1528869875.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:35.996Z,1528869875.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:36.384Z,1528869876.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:36.788Z,1528869876.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:37.195Z,1528869877.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:37.596Z,1528869877.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:37.996Z,1528869877.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:38.388Z,1528869878.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:38.796Z,1528869878.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:39.196Z,1528869879.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:39.604Z,1528869879.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:39.993Z,1528869879.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:40.388Z,1528869880.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:40.791Z,1528869880.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:41.193Z,1528869881.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:41.598Z,1528869881.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:41.996Z,1528869881.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:42.385Z,1528869882.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:42.786Z,1528869882.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:43.196Z,1528869883.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:43.597Z,1528869883.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:43.995Z,1528869883.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:44.389Z,1528869884.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:44.784Z,1528869884.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:45.200Z,1528869885.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:45.604Z,1528869885.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:45.992Z,1528869885.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:46.390Z,1528869886.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:46.791Z,1528869886.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:47.193Z,1528869887.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:47.601Z,1528869887.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:47.996Z,1528869887.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:48.389Z,1528869888.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:48.787Z,1528869888.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:49.204Z,1528869889.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:49.595Z,1528869889.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:49.994Z,1528869889.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:50.393Z,1528869890.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:50.784Z,1528869890.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:51.197Z,1528869891.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:51.601Z,1528869891.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:51.994Z,1528869891.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:52.390Z,1528869892.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:52.792Z,1528869892.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:53.199Z,1528869893.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:53.599Z,1528869893.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:54.001Z,1528869894.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:54.392Z,1528869894.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:54.788Z,1528869894.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:55.202Z,1528869895.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:55.596Z,1528869895.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:55.997Z,1528869895.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:56.403Z,1528869896.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:56.784Z,1528869896.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:57.204Z,1528869897.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:57.601Z,1528869897.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:57.996Z,1528869897.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:58.389Z,1528869898.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:58.795Z,1528869898.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:59.193Z,1528869899.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:04:59.599Z,1528869899.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:00.004Z,1528869900.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:00.389Z,1528869900.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:00.788Z,1528869900.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:01.208Z,1528869901.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:01.597Z,1528869901.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:01.998Z,1528869901.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:02.396Z,1528869902.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:02.788Z,1528869902.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:03.197Z,1528869903.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:03.601Z,1528869903.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:03.994Z,1528869903.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:04.389Z,1528869904.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:04.797Z,1528869904.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:05.197Z,1528869905.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:05.600Z,1528869905.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:06.009Z,1528869906.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:06.389Z,1528869906.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:06.796Z,1528869906.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:07.212Z,1528869907.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:10.312Z,1528869910.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:10.488Z,1528869910.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:10.864Z,1528869910.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:11.259Z,1528869911.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:11.660Z,1528869911.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:12.057Z,1528869912.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:12.464Z,1528869912.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:12.888Z,1528869912.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:13.267Z,1528869913.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:13.656Z,1528869913.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:14.059Z,1528869914.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:14.459Z,1528869914.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:14.857Z,1528869914.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:15.263Z,1528869915.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:15.667Z,1528869915.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:16.063Z,1528869916.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:16.459Z,1528869916.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:16.868Z,1528869916.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:17.291Z,1528869917.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:17.667Z,1528869917.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:18.067Z,1528869918.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:18.456Z,1528869918.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:18.859Z,1528869918.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:19.264Z,1528869919.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:19.663Z,1528869919.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:20.064Z,1528869920.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:20.460Z,1528869920.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:20.856Z,1528869920.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:21.264Z,1528869921.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:21.663Z,1528869921.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:22.064Z,1528869922.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:22.461Z,1528869922.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:22.859Z,1528869922.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:23.260Z,1528869923.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:23.668Z,1528869923.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:24.064Z,1528869924.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:24.460Z,1528869924.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:24.859Z,1528869924.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:25.272Z,1528869925.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:25.667Z,1528869925.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:26.068Z,1528869926.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:26.461Z,1528869926.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:26.856Z,1528869926.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:27.268Z,1528869927.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:27.672Z,1528869927.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:28.070Z,1528869928.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:28.460Z,1528869928.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:28.855Z,1528869928.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:29.267Z,1528869929.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:29.672Z,1528869929.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:30.072Z,1528869930.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:30.466Z,1528869930.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:30.860Z,1528869930.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:31.269Z,1528869931.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:31.672Z,1528869931.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:32.067Z,1528869932.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:32.458Z,1528869932.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:32.864Z,1528869932.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:33.268Z,1528869933.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:33.667Z,1528869933.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:34.068Z,1528869934.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:34.458Z,1528869934.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:34.859Z,1528869934.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:35.276Z,1528869935.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:35.672Z,1528869935.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:36.072Z,1528869936.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:36.466Z,1528869936.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:36.860Z,1528869936.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:37.272Z,1528869937.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:37.672Z,1528869937.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:38.069Z,1528869938.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:38.460Z,1528869938.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:38.865Z,1528869938.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:39.267Z,1528869939.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:39.672Z,1528869939.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:40.068Z,1528869940.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:40.459Z,1528869940.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:40.859Z,1528869940.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:41.267Z,1528869941.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:41.672Z,1528869941.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:42.069Z,1528869942.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:42.459Z,1528869942.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:42.865Z,1528869942.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:43.272Z,1528869943.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:43.672Z,1528869943.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:44.067Z,1528869944.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:44.464Z,1528869944.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:44.859Z,1528869944.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:45.267Z,1528869945.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:45.668Z,1528869945.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:46.072Z,1528869946.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:46.459Z,1528869946.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:46.862Z,1528869946.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:47.268Z,1528869947.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:47.671Z,1528869947.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:48.068Z,1528869948.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:48.459Z,1528869948.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:48.860Z,1528869948.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:49.268Z,1528869949.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:49.672Z,1528869949.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:50.067Z,1528869950.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:50.460Z,1528869950.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:50.858Z,1528869950.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:51.267Z,1528869951.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:51.676Z,1528869951.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:52.067Z,1528869952.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:52.463Z,1528869952.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:52.862Z,1528869952.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:53.268Z,1528869953.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:53.672Z,1528869953.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:54.071Z,1528869954.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:54.459Z,1528869954.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:54.864Z,1528869954.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:55.268Z,1528869955.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:55.670Z,1528869955.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:56.074Z,1528869956.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:56.480Z,1528869956.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:56.857Z,1528869956.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:57.268Z,1528869957.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:57.668Z,1528869957.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:58.057Z,1528869958.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:58.470Z,1528869958.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:58.880Z,1528869958.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:59.275Z,1528869959.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:05:59.668Z,1528869959.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:00.074Z,1528869960.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:00.448Z,1528869960.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:00.876Z,1528869960.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:01.273Z,1528869961.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:01.684Z,1528869961.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:02.079Z,1528869962.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:02.482Z,1528869962.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:02.856Z,1528869962.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:03.256Z,1528869963.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:03.657Z,1528869963.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:04.053Z,1528869964.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:04.483Z,1528869964.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:04.888Z,1528869964.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:05.263Z,1528869965.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:05.658Z,1528869965.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:06.059Z,1528869966.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:06.458Z,1528869966.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:06.861Z,1528869966.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:07.260Z,1528869967.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:10.393Z,1528869970.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:10.569Z,1528869970.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:10.951Z,1528869970.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:11.341Z,1528869971.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:11.726Z,1528869971.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:12.137Z,1528869972.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:12.554Z,1528869972.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:12.951Z,1528869972.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:13.354Z,1528869973.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:13.728Z,1528869973.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:14.127Z,1528869974.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:14.528Z,1528869974.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:14.929Z,1528869974.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:15.352Z,1528869975.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:15.756Z,1528869975.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:16.156Z,1528869976.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:16.532Z,1528869976.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:16.929Z,1528869976.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:17.335Z,1528869977.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:17.755Z,1528869977.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:18.158Z,1528869978.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:18.527Z,1528869978.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:18.928Z,1528869978.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:19.358Z,1528869979.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:19.755Z,1528869979.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:20.156Z,1528869980.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:20.528Z,1528869980.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:20.926Z,1528869980.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:21.356Z,1528869981.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:21.736Z,1528869981.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:22.131Z,1528869982.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:22.532Z,1528869982.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:22.928Z,1528869982.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:23.332Z,1528869983.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:23.760Z,1528869983.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:24.144Z,1528869984.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:24.532Z,1528869984.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:24.931Z,1528869984.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:25.344Z,1528869985.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:25.761Z,1528869985.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:26.140Z,1528869986.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:26.533Z,1528869986.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:26.930Z,1528869986.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:27.335Z,1528869987.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:27.744Z,1528869987.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:28.136Z,1528869988.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:28.542Z,1528869988.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:28.941Z,1528869988.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:29.348Z,1528869989.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:29.744Z,1528869989.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:30.148Z,1528869990.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:30.529Z,1528869990.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:30.932Z,1528869990.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:31.348Z,1528869991.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:31.744Z,1528869991.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:32.144Z,1528869992.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:32.532Z,1528869992.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:32.928Z,1528869992.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:33.348Z,1528869993.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:33.748Z,1528869993.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:34.148Z,1528869994.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:34.532Z,1528869994.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:34.935Z,1528869994.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:35.348Z,1528869995.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:35.744Z,1528869995.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:36.148Z,1528869996.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:36.531Z,1528869996.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:36.930Z,1528869996.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:37.345Z,1528869997.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:37.748Z,1528869997.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:38.148Z,1528869998.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:38.533Z,1528869998.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:38.931Z,1528869998.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:39.341Z,1528869999.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:39.746Z,1528869999.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:40.139Z,1528870000.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:40.533Z,1528870000.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:40.936Z,1528870000.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:41.343Z,1528870001.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:41.745Z,1528870001.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:42.147Z,1528870002.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:42.531Z,1528870002.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:42.937Z,1528870002.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:43.347Z,1528870003.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:43.743Z,1528870003.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:44.146Z,1528870004.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:44.546Z,1528870004.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:44.930Z,1528870004.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:45.333Z,1528870005.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:45.750Z,1528870005.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:46.141Z,1528870006.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:46.542Z,1528870006.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:46.948Z,1528870006.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:47.342Z,1528870007.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:47.734Z,1528870007.734 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:47.734Z,1528870007.734 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2018-06-13T06:06:47.734Z,1528870007.734 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:06:47.736Z,1528870007.736 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:47.736Z,1528870007.736 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54
2018-06-13T06:06:47.736Z,1528870007.736 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:06:47.738Z,1528870007.738 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:47.738Z,1528870007.738 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2018-06-13T06:06:47.738Z,1528870007.738 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:06:47.817Z,1528870007.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:06:47.817Z,1528870007.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:06:47.818Z,1528870007.818 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:06:48.221Z,1528870008.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:06:48.221Z,1528870008.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2018-06-13T06:06:48.222Z,1528870008.222 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:06:48.222Z,1528870008.222 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54
2018-06-13T06:06:48.222Z,1528870008.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:06:48.222Z,1528870008.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2018-06-13T06:06:48.547Z,1528870008.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:06:48.548Z,1528870008.548 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:06:48.548Z,1528870008.548 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:06:48.548Z,1528870008.548 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:06:48.553Z,1528870008.553 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:06:48.553Z,1528870008.553 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:06:48.553Z,1528870008.553 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:06:48.554Z,1528870008.554 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:06:48.554Z,1528870008.554 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:06:48.937Z,1528870008.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:06:48.938Z,1528870008.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:49.359Z,1528870009.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:06:49.360Z,1528870009.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:49.754Z,1528870009.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:06:49.755Z,1528870009.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:50.156Z,1528870010.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:06:50.157Z,1528870010.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:50.560Z,1528870010.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:06:50.565Z,1528870010.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:50.927Z,1528870010.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:06:50.928Z,1528870010.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:51.327Z,1528870011.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:06:51.328Z,1528870011.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:51.737Z,1528870011.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:06:51.738Z,1528870011.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:52.127Z,1528870012.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:06:52.128Z,1528870012.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:52.536Z,1528870012.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:06:52.538Z,1528870012.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:52.939Z,1528870012.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:06:52.940Z,1528870012.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:53.336Z,1528870013.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:06:53.337Z,1528870013.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:53.732Z,1528870013.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:06:53.733Z,1528870013.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:54.131Z,1528870014.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:06:54.132Z,1528870014.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:54.535Z,1528870014.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:06:54.536Z,1528870014.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:54.933Z,1528870014.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:06:54.934Z,1528870014.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:55.335Z,1528870015.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:06:55.336Z,1528870015.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:55.740Z,1528870015.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:06:55.741Z,1528870015.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:56.148Z,1528870016.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:06:56.149Z,1528870016.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:56.545Z,1528870016.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:06:56.546Z,1528870016.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:56.928Z,1528870016.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:06:56.929Z,1528870016.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:57.330Z,1528870017.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:06:57.331Z,1528870017.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:57.732Z,1528870017.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:06:57.733Z,1528870017.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:58.130Z,1528870018.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:06:58.131Z,1528870018.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:58.548Z,1528870018.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:06:58.550Z,1528870018.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:58.952Z,1528870018.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:06:58.969Z,1528870018.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:59.339Z,1528870019.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:06:59.340Z,1528870019.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:06:59.740Z,1528870019.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:06:59.745Z,1528870019.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:00.135Z,1528870020.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:07:00.136Z,1528870020.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:00.532Z,1528870020.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:07:00.533Z,1528870020.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:00.932Z,1528870020.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:07:00.934Z,1528870020.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:01.343Z,1528870021.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:07:01.344Z,1528870021.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:01.737Z,1528870021.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:07:01.738Z,1528870021.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:02.152Z,1528870022.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:07:02.153Z,1528870022.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:02.552Z,1528870022.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:07:02.553Z,1528870022.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:02.932Z,1528870022.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:07:02.932Z,1528870022.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:03.331Z,1528870023.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:07:03.332Z,1528870023.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:03.735Z,1528870023.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:07:03.736Z,1528870023.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:04.138Z,1528870024.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:07:04.139Z,1528870024.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:04.541Z,1528870024.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:07:04.542Z,1528870024.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:04.946Z,1528870024.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:07:04.947Z,1528870024.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:05.336Z,1528870025.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:07:05.338Z,1528870025.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:05.732Z,1528870025.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:07:05.732Z,1528870025.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:06.148Z,1528870026.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:07:06.153Z,1528870026.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:06.536Z,1528870026.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:07:06.541Z,1528870026.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:06.942Z,1528870026.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:07:06.943Z,1528870026.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:07.344Z,1528870027.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:07:07.345Z,1528870027.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:07.752Z,1528870027.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:08.150Z,1528870028.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:08.550Z,1528870028.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:11.648Z,1528870031.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:11.792Z,1528870031.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:12.205Z,1528870032.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:12.594Z,1528870032.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:13.004Z,1528870033.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:13.393Z,1528870033.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:13.789Z,1528870033.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:14.196Z,1528870034.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:14.602Z,1528870034.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:14.000Z,1528870035.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:15.402Z,1528870035.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:15.777Z,1528870035.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:16.175Z,1528870036.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:16.580Z,1528870036.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:16.981Z,1528870036.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:17.379Z,1528870037.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:17.807Z,1528870037.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:18.211Z,1528870038.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:18.583Z,1528870038.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:18.979Z,1528870038.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:19.380Z,1528870039.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:19.784Z,1528870039.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:20.182Z,1528870040.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:20.591Z,1528870040.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:20.987Z,1528870040.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:21.387Z,1528870041.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:21.788Z,1528870041.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:22.178Z,1528870042.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:22.582Z,1528870042.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:22.984Z,1528870042.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:23.379Z,1528870043.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:23.788Z,1528870043.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:24.187Z,1528870044.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:24.587Z,1528870044.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:24.982Z,1528870044.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:25.383Z,1528870045.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:25.779Z,1528870045.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:26.182Z,1528870046.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:26.588Z,1528870046.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:26.987Z,1528870046.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:27.387Z,1528870047.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:27.783Z,1528870047.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:28.187Z,1528870048.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:28.580Z,1528870048.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:28.981Z,1528870048.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:29.379Z,1528870049.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:29.788Z,1528870049.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:30.192Z,1528870050.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:30.588Z,1528870050.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:30.982Z,1528870050.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:31.381Z,1528870051.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:31.784Z,1528870051.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:32.203Z,1528870052.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:32.591Z,1528870052.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:32.987Z,1528870052.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:33.388Z,1528870053.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:33.783Z,1528870053.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:34.179Z,1528870054.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:34.582Z,1528870054.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:34.983Z,1528870054.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:35.378Z,1528870055.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:35.788Z,1528870055.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:36.139Z,1528870056.139 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T06:07:36.139Z,1528870056.139 [NAL9602] Data Fault, FailCount= 5
2018-06-13T06:07:36.139Z,1528870056.139 [NAL9602](ERROR): Data Fault
2018-06-13T06:07:36.206Z,1528870056.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:36.281Z,1528870056.281 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T06:07:36.281Z,1528870056.281 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T06:07:36.538Z,1528870056.538 [NAL9602](INFO): Powering down
2018-06-13T06:07:36.586Z,1528870056.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:36.659Z,1528870056.659 [CBIT](INFO): Critical error at 20180613T060736
2018-06-13T06:07:36.980Z,1528870056.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:37.377Z,1528870057.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:37.777Z,1528870057.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:38.183Z,1528870058.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:38.577Z,1528870058.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:38.977Z,1528870058.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:39.381Z,1528870059.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:39.778Z,1528870059.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:40.178Z,1528870060.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:40.588Z,1528870060.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:40.977Z,1528870060.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:41.378Z,1528870061.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:41.788Z,1528870061.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:42.177Z,1528870062.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:42.577Z,1528870062.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:42.983Z,1528870062.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:43.377Z,1528870063.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:43.777Z,1528870063.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:44.181Z,1528870064.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:44.577Z,1528870064.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:44.982Z,1528870064.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:45.384Z,1528870065.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:45.777Z,1528870065.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:46.177Z,1528870066.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:46.581Z,1528870066.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:46.977Z,1528870066.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:47.381Z,1528870067.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:47.780Z,1528870067.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:48.177Z,1528870068.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:48.582Z,1528870068.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:48.975Z,1528870068.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:49.380Z,1528870069.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:49.784Z,1528870069.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:50.182Z,1528870070.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:50.581Z,1528870070.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:50.988Z,1528870070.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:51.382Z,1528870071.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:51.780Z,1528870071.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:52.181Z,1528870072.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:52.582Z,1528870072.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:52.984Z,1528870072.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:53.381Z,1528870073.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:53.780Z,1528870073.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:54.177Z,1528870074.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:54.582Z,1528870074.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:54.981Z,1528870074.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:55.377Z,1528870075.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:55.781Z,1528870075.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:56.181Z,1528870076.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:56.578Z,1528870076.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:56.981Z,1528870076.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:57.381Z,1528870077.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:57.776Z,1528870077.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:58.181Z,1528870078.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:58.581Z,1528870078.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:58.977Z,1528870078.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:59.378Z,1528870079.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:07:59.779Z,1528870079.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:00.174Z,1528870080.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:00.578Z,1528870080.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:00.978Z,1528870080.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:01.378Z,1528870081.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:01.784Z,1528870081.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:02.178Z,1528870082.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:02.574Z,1528870082.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:02.983Z,1528870082.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:03.378Z,1528870083.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:03.774Z,1528870083.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:04.176Z,1528870084.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:04.582Z,1528870084.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:04.975Z,1528870084.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:05.376Z,1528870085.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:05.785Z,1528870085.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:06.179Z,1528870086.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:06.577Z,1528870086.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:06.982Z,1528870086.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:07.382Z,1528870087.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:10.488Z,1528870090.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:10.659Z,1528870090.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:11.044Z,1528870091.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:11.436Z,1528870091.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:11.836Z,1528870091.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:12.236Z,1528870092.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:12.630Z,1528870092.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:13.048Z,1528870093.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:13.435Z,1528870093.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:13.835Z,1528870093.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:14.248Z,1528870094.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:14.635Z,1528870094.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:15.031Z,1528870095.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:15.436Z,1528870095.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:15.834Z,1528870095.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:16.231Z,1528870096.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:16.635Z,1528870096.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:17.035Z,1528870097.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:17.431Z,1528870097.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:17.836Z,1528870097.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:18.245Z,1528870098.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:18.630Z,1528870098.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:19.046Z,1528870099.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:19.434Z,1528870099.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:19.835Z,1528870099.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:20.236Z,1528870100.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:20.634Z,1528870100.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:21.032Z,1528870101.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:21.434Z,1528870101.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:21.834Z,1528870101.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:22.232Z,1528870102.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:22.635Z,1528870102.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:23.034Z,1528870103.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:23.432Z,1528870103.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:23.838Z,1528870103.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:24.234Z,1528870104.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:24.632Z,1528870104.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:25.032Z,1528870105.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:25.437Z,1528870105.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:25.836Z,1528870105.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:26.236Z,1528870106.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:26.639Z,1528870106.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:27.044Z,1528870107.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:27.436Z,1528870107.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:27.837Z,1528870107.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:28.241Z,1528870108.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:28.642Z,1528870108.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:29.043Z,1528870109.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:29.436Z,1528870109.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:29.849Z,1528870109.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:30.254Z,1528870110.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:30.625Z,1528870110.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:31.028Z,1528870111.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:31.428Z,1528870111.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:31.828Z,1528870111.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:32.229Z,1528870112.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:32.628Z,1528870112.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:33.024Z,1528870113.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:33.432Z,1528870113.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:33.828Z,1528870113.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:34.232Z,1528870114.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:34.636Z,1528870114.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:35.030Z,1528870115.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:35.427Z,1528870115.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:35.831Z,1528870115.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:36.231Z,1528870116.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:36.627Z,1528870116.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:37.031Z,1528870117.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:37.430Z,1528870117.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:37.831Z,1528870117.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:38.236Z,1528870118.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:38.631Z,1528870118.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:39.027Z,1528870119.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:39.431Z,1528870119.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:39.831Z,1528870119.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:40.228Z,1528870120.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:40.631Z,1528870120.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:41.031Z,1528870121.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:41.427Z,1528870121.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:41.831Z,1528870121.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:42.232Z,1528870122.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:42.627Z,1528870122.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:43.036Z,1528870123.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:43.431Z,1528870123.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:43.831Z,1528870123.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:44.232Z,1528870124.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:44.636Z,1528870124.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:45.029Z,1528870125.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:45.431Z,1528870125.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:45.831Z,1528870125.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:46.228Z,1528870126.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:46.632Z,1528870126.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:47.032Z,1528870127.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:47.428Z,1528870127.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:47.836Z,1528870127.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:48.231Z,1528870128.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:48.628Z,1528870128.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:49.036Z,1528870129.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:49.431Z,1528870129.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:49.833Z,1528870129.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:50.232Z,1528870130.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:50.632Z,1528870130.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:51.028Z,1528870131.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:51.432Z,1528870131.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:51.832Z,1528870131.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:52.229Z,1528870132.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:52.640Z,1528870132.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:53.032Z,1528870133.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:53.430Z,1528870133.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:53.832Z,1528870133.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:54.231Z,1528870134.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:54.631Z,1528870134.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:55.032Z,1528870135.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:55.431Z,1528870135.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:55.831Z,1528870135.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:56.232Z,1528870136.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:56.632Z,1528870136.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:57.030Z,1528870137.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:57.432Z,1528870137.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:57.831Z,1528870137.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:58.230Z,1528870138.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:58.648Z,1528870138.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:59.034Z,1528870139.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:59.430Z,1528870139.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:08:59.834Z,1528870139.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:00.234Z,1528870140.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:00.630Z,1528870140.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:01.035Z,1528870141.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:01.435Z,1528870141.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:01.834Z,1528870141.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:02.245Z,1528870142.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:02.634Z,1528870142.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:03.032Z,1528870143.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:03.445Z,1528870143.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:03.837Z,1528870143.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:04.237Z,1528870144.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:04.636Z,1528870144.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:05.033Z,1528870145.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:05.432Z,1528870145.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:05.836Z,1528870145.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:06.238Z,1528870146.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:06.644Z,1528870146.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:07.040Z,1528870147.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:07.441Z,1528870147.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:10.542Z,1528870150.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:10.545Z,1528870150.545 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T06:04:10.3Z
2018-06-13T06:09:10.545Z,1528870150.545 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T06:09:10.545Z,1528870150.545 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T06:09:10.682Z,1528870150.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:11.820Z,1528870151.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:12.003Z,1528870152.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:12.394Z,1528870152.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:12.796Z,1528870152.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:15.894Z,1528870155.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:15.987Z,1528870155.987 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0064.lzma
2018-06-13T06:09:16.088Z,1528870156.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:16.447Z,1528870156.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:16.786Z,1528870156.786 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0064.lzma.bak
2018-06-13T06:09:16.786Z,1528870156.786 [DataOverHttps](INFO): SBD MOMSN=8328707
2018-06-13T06:09:16.859Z,1528870156.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:18.744Z,1528870158.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:18.908Z,1528870158.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:22.008Z,1528870162.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:22.152Z,1528870162.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:22.551Z,1528870162.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:22.952Z,1528870162.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:23.328Z,1528870163.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:23.756Z,1528870163.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:26.856Z,1528870166.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:26.953Z,1528870166.953 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0065.lzma
2018-06-13T06:09:27.018Z,1528870167.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:27.415Z,1528870167.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:27.754Z,1528870167.754 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0065.lzma.bak
2018-06-13T06:09:27.757Z,1528870167.757 [DataOverHttps](INFO): SBD MOMSN=8328710
2018-06-13T06:09:27.840Z,1528870167.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:29.715Z,1528870169.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:29.718Z,1528870169.718 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T06:09:29.718Z,1528870169.718 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T06:09:29.718Z,1528870169.718 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T06:09:29.992Z,1528870169.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:30.392Z,1528870170.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:30.790Z,1528870170.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:34.002Z,1528870174.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:34.147Z,1528870174.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:34.535Z,1528870174.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:34.938Z,1528870174.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:35.338Z,1528870175.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:35.740Z,1528870175.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:36.138Z,1528870176.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:36.225Z,1528870176.225 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T06:09:36.225Z,1528870176.225 [NAL9602] No Fault, FailCount= 5
2018-06-13T06:09:36.486Z,1528870176.486 [NAL9602](INFO): Powering up NAL9602
2018-06-13T06:09:36.536Z,1528870176.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:36.941Z,1528870176.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:37.345Z,1528870177.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:37.745Z,1528870177.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:38.148Z,1528870178.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:38.520Z,1528870178.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:38.924Z,1528870178.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:39.324Z,1528870179.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:39.724Z,1528870179.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:40.124Z,1528870180.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:40.525Z,1528870180.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:40.924Z,1528870180.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:41.328Z,1528870181.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:41.732Z,1528870181.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:42.126Z,1528870182.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:42.527Z,1528870182.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:42.927Z,1528870182.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:43.323Z,1528870183.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:43.727Z,1528870183.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:44.127Z,1528870184.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:44.522Z,1528870184.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:44.927Z,1528870184.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:45.328Z,1528870185.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:45.726Z,1528870185.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:46.128Z,1528870186.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:46.556Z,1528870186.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:46.932Z,1528870186.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:47.286Z,1528870187.286 [NAL9602](INFO): NAL9602 initialized
2018-06-13T06:09:47.333Z,1528870187.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:47.730Z,1528870187.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:48.160Z,1528870188.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:48.535Z,1528870188.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:48.936Z,1528870188.936 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:48.936Z,1528870188.936 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2018-06-13T06:09:48.936Z,1528870188.936 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:09:48.938Z,1528870188.938 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:48.938Z,1528870188.938 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55
2018-06-13T06:09:48.938Z,1528870188.938 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:09:48.940Z,1528870188.940 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:48.940Z,1528870188.940 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2018-06-13T06:09:48.940Z,1528870188.940 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:09:49.053Z,1528870189.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:09:49.053Z,1528870189.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:09:49.053Z,1528870189.053 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:09:49.409Z,1528870189.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:09:49.409Z,1528870189.409 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2018-06-13T06:09:49.410Z,1528870189.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:09:49.410Z,1528870189.410 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55
2018-06-13T06:09:49.410Z,1528870189.410 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:09:49.410Z,1528870189.410 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2018-06-13T06:09:49.731Z,1528870189.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:09:49.732Z,1528870189.732 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:09:49.732Z,1528870189.732 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:09:49.732Z,1528870189.732 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:09:49.733Z,1528870189.733 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:09:49.733Z,1528870189.733 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:09:49.734Z,1528870189.734 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:09:49.734Z,1528870189.734 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:09:49.734Z,1528870189.734 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:09:50.138Z,1528870190.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:09:50.139Z,1528870190.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:50.540Z,1528870190.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:09:50.542Z,1528870190.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:50.948Z,1528870190.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:09:50.949Z,1528870190.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:51.344Z,1528870191.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:09:51.345Z,1528870191.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:51.825Z,1528870191.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T06:09:51.826Z,1528870191.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:52.155Z,1528870192.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:09:52.155Z,1528870192.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:52.586Z,1528870192.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:09:52.586Z,1528870192.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:52.926Z,1528870192.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:09:52.927Z,1528870192.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:53.443Z,1528870193.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T06:09:53.443Z,1528870193.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:53.748Z,1528870193.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:09:53.748Z,1528870193.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:54.150Z,1528870194.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:09:54.151Z,1528870194.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:54.537Z,1528870194.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:09:54.538Z,1528870194.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:54.938Z,1528870194.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:09:54.939Z,1528870194.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:55.339Z,1528870195.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:09:55.340Z,1528870195.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:55.744Z,1528870195.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:09:55.745Z,1528870195.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:56.142Z,1528870196.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:09:56.143Z,1528870196.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:56.551Z,1528870196.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:09:56.552Z,1528870196.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:56.946Z,1528870196.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:09:56.947Z,1528870196.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:57.347Z,1528870197.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:09:57.348Z,1528870197.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:57.739Z,1528870197.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:09:57.740Z,1528870197.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:58.138Z,1528870198.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:09:58.139Z,1528870198.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:58.538Z,1528870198.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:09:58.538Z,1528870198.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:58.948Z,1528870198.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:09:58.949Z,1528870198.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:59.346Z,1528870199.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:09:59.347Z,1528870199.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:09:59.756Z,1528870199.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:09:59.757Z,1528870199.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:00.147Z,1528870200.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:10:00.148Z,1528870200.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:00.533Z,1528870200.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:10:00.534Z,1528870200.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:00.940Z,1528870200.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:10:00.945Z,1528870200.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:01.322Z,1528870201.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:10:01.323Z,1528870201.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:01.722Z,1528870201.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:10:01.723Z,1528870201.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:02.133Z,1528870202.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:10:02.134Z,1528870202.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:02.532Z,1528870202.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:10:02.534Z,1528870202.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:02.935Z,1528870202.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:10:02.936Z,1528870202.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:03.339Z,1528870203.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:10:03.340Z,1528870203.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:03.733Z,1528870203.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:10:03.734Z,1528870203.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:04.126Z,1528870204.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:10:04.127Z,1528870204.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:04.535Z,1528870204.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:10:04.536Z,1528870204.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:04.927Z,1528870204.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:10:04.928Z,1528870204.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:05.336Z,1528870205.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:10:05.337Z,1528870205.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:05.744Z,1528870205.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:10:05.746Z,1528870205.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:06.140Z,1528870206.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:10:06.140Z,1528870206.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:06.529Z,1528870206.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:10:06.530Z,1528870206.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:06.931Z,1528870206.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:10:06.932Z,1528870206.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:07.339Z,1528870207.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:10:07.340Z,1528870207.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:07.726Z,1528870207.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:10:07.727Z,1528870207.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:08.132Z,1528870208.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:10:08.133Z,1528870208.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:08.540Z,1528870208.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:10:08.541Z,1528870208.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:08.944Z,1528870208.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:09.340Z,1528870209.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:09.741Z,1528870209.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:10.128Z,1528870210.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:10.533Z,1528870210.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:10.934Z,1528870210.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:11.337Z,1528870211.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:11.743Z,1528870211.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:12.140Z,1528870212.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:12.528Z,1528870212.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:12.931Z,1528870212.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:13.336Z,1528870213.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:13.728Z,1528870213.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:14.133Z,1528870214.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:14.544Z,1528870214.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:14.940Z,1528870214.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:15.342Z,1528870215.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:15.734Z,1528870215.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:16.131Z,1528870216.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:16.536Z,1528870216.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:16.934Z,1528870216.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:17.336Z,1528870217.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:17.745Z,1528870217.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:18.148Z,1528870218.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:18.528Z,1528870218.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:18.934Z,1528870218.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:19.334Z,1528870219.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:19.728Z,1528870219.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:20.132Z,1528870220.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:20.540Z,1528870220.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:20.941Z,1528870220.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:21.344Z,1528870221.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:21.734Z,1528870221.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:22.128Z,1528870222.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:22.534Z,1528870222.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:22.935Z,1528870222.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:23.337Z,1528870223.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:23.744Z,1528870223.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:24.144Z,1528870224.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:24.528Z,1528870224.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:24.931Z,1528870224.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:25.331Z,1528870225.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:25.729Z,1528870225.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:26.132Z,1528870226.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:26.548Z,1528870226.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:26.941Z,1528870226.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:27.345Z,1528870227.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:27.735Z,1528870227.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:28.128Z,1528870228.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:28.536Z,1528870228.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:28.934Z,1528870228.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:29.336Z,1528870229.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:29.744Z,1528870229.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:30.144Z,1528870230.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:33.239Z,1528870233.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:33.400Z,1528870233.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:33.789Z,1528870233.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:34.189Z,1528870234.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:34.585Z,1528870234.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:34.985Z,1528870234.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:35.377Z,1528870235.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:35.790Z,1528870235.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:36.185Z,1528870236.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:36.591Z,1528870236.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:36.990Z,1528870236.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:37.389Z,1528870237.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:37.786Z,1528870237.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:38.193Z,1528870238.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:38.570Z,1528870238.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:38.968Z,1528870238.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:39.398Z,1528870239.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:39.798Z,1528870239.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:40.199Z,1528870240.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:40.596Z,1528870240.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:40.980Z,1528870240.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:41.373Z,1528870241.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:41.780Z,1528870241.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:42.184Z,1528870242.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:42.584Z,1528870242.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:42.983Z,1528870242.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:43.380Z,1528870243.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:43.780Z,1528870243.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:44.175Z,1528870244.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:44.576Z,1528870244.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:44.973Z,1528870244.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:45.388Z,1528870245.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:45.808Z,1528870245.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:46.185Z,1528870246.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:46.591Z,1528870246.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:46.986Z,1528870246.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:47.376Z,1528870247.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:47.788Z,1528870247.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:48.179Z,1528870248.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:48.586Z,1528870248.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:48.987Z,1528870248.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:49.386Z,1528870249.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:49.776Z,1528870249.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:50.178Z,1528870250.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:50.581Z,1528870250.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:50.976Z,1528870250.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:51.385Z,1528870251.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:51.785Z,1528870251.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:52.186Z,1528870252.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:52.580Z,1528870252.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:52.987Z,1528870252.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:53.373Z,1528870253.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:53.776Z,1528870253.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:54.184Z,1528870254.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:54.585Z,1528870254.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:54.989Z,1528870254.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:55.385Z,1528870255.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:55.773Z,1528870255.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:56.176Z,1528870256.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:56.579Z,1528870256.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:56.978Z,1528870256.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:57.385Z,1528870257.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:57.789Z,1528870257.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:58.190Z,1528870258.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:58.580Z,1528870258.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:58.988Z,1528870258.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:59.373Z,1528870259.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:10:59.784Z,1528870259.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:00.198Z,1528870260.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:00.585Z,1528870260.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:00.992Z,1528870260.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:01.416Z,1528870261.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:01.789Z,1528870261.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:02.176Z,1528870262.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:02.582Z,1528870262.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:02.983Z,1528870262.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:03.392Z,1528870263.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:03.790Z,1528870263.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:04.186Z,1528870264.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:04.582Z,1528870264.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:04.983Z,1528870264.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:05.382Z,1528870265.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:05.783Z,1528870265.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:06.188Z,1528870266.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:06.592Z,1528870266.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:06.989Z,1528870266.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:07.396Z,1528870267.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:07.781Z,1528870267.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:08.186Z,1528870268.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:08.602Z,1528870268.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:08.964Z,1528870268.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:09.387Z,1528870269.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:09.801Z,1528870269.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:10.188Z,1528870270.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:10.590Z,1528870270.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:10.991Z,1528870270.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:11.364Z,1528870271.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:11.772Z,1528870271.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:12.172Z,1528870272.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:12.591Z,1528870272.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:12.999Z,1528870272.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:13.383Z,1528870273.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:13.774Z,1528870273.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:14.174Z,1528870274.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:14.574Z,1528870274.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:14.971Z,1528870274.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:15.384Z,1528870275.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:15.783Z,1528870275.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:16.179Z,1528870276.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:16.575Z,1528870276.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:16.974Z,1528870276.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:17.372Z,1528870277.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:17.777Z,1528870277.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:18.176Z,1528870278.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:18.579Z,1528870278.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:18.983Z,1528870278.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:19.380Z,1528870279.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:19.772Z,1528870279.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:20.178Z,1528870280.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:20.586Z,1528870280.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:20.973Z,1528870280.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:21.383Z,1528870281.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:21.784Z,1528870281.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:22.182Z,1528870282.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:22.576Z,1528870282.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:22.976Z,1528870282.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:23.373Z,1528870283.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:23.776Z,1528870283.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:24.175Z,1528870284.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:24.582Z,1528870284.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:24.984Z,1528870284.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:25.380Z,1528870285.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:25.771Z,1528870285.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:26.175Z,1528870286.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:26.578Z,1528870286.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:26.972Z,1528870286.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:27.384Z,1528870287.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:27.782Z,1528870287.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:28.184Z,1528870288.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:28.576Z,1528870288.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:28.981Z,1528870288.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:29.371Z,1528870289.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:29.784Z,1528870289.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:30.184Z,1528870290.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:33.388Z,1528870293.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:33.565Z,1528870293.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:33.937Z,1528870293.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:34.334Z,1528870294.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:34.732Z,1528870294.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:35.131Z,1528870295.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:35.535Z,1528870295.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:35.947Z,1528870295.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:36.352Z,1528870296.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:36.729Z,1528870296.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:37.127Z,1528870297.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:37.530Z,1528870297.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:37.934Z,1528870297.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:38.338Z,1528870298.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:38.738Z,1528870298.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:39.139Z,1528870299.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:39.535Z,1528870299.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:39.934Z,1528870299.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:40.339Z,1528870300.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:40.737Z,1528870300.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:41.143Z,1528870301.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:41.533Z,1528870301.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:41.937Z,1528870301.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:42.340Z,1528870302.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:42.739Z,1528870302.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:43.136Z,1528870303.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:43.521Z,1528870303.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:43.916Z,1528870303.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:44.342Z,1528870304.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:44.743Z,1528870304.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:45.144Z,1528870305.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:45.524Z,1528870305.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:45.919Z,1528870305.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:46.327Z,1528870306.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:46.746Z,1528870306.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:47.154Z,1528870307.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:47.520Z,1528870307.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:47.920Z,1528870307.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:48.352Z,1528870308.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:48.726Z,1528870308.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:49.147Z,1528870309.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:49.524Z,1528870309.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:49.920Z,1528870309.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:50.331Z,1528870310.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:50.754Z,1528870310.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:51.127Z,1528870311.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:51.519Z,1528870311.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:51.919Z,1528870311.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:52.319Z,1528870312.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:52.731Z,1528870312.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:53.131Z,1528870313.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:53.531Z,1528870313.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:53.921Z,1528870313.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:54.321Z,1528870314.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:54.724Z,1528870314.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:55.121Z,1528870315.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:55.528Z,1528870315.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:55.931Z,1528870315.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:56.327Z,1528870316.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:56.721Z,1528870316.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:57.123Z,1528870317.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:57.524Z,1528870317.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:57.924Z,1528870317.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:58.328Z,1528870318.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:58.731Z,1528870318.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:59.132Z,1528870319.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:59.552Z,1528870319.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:11:59.921Z,1528870319.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:00.322Z,1528870320.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:00.723Z,1528870320.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:01.122Z,1528870321.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:01.528Z,1528870321.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:01.931Z,1528870321.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:02.328Z,1528870322.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:02.728Z,1528870322.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:03.123Z,1528870323.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:03.524Z,1528870323.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:03.929Z,1528870323.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:04.325Z,1528870324.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:04.727Z,1528870324.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:05.131Z,1528870325.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:05.531Z,1528870325.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:05.921Z,1528870325.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:06.322Z,1528870326.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:06.728Z,1528870326.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:07.128Z,1528870327.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:07.528Z,1528870327.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:07.931Z,1528870327.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:08.328Z,1528870328.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:08.728Z,1528870328.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:09.125Z,1528870329.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:09.523Z,1528870329.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:09.923Z,1528870329.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:10.324Z,1528870330.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:10.727Z,1528870330.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:11.132Z,1528870331.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:11.531Z,1528870331.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:11.924Z,1528870331.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:12.331Z,1528870332.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:12.724Z,1528870332.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:13.133Z,1528870333.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:13.531Z,1528870333.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:13.930Z,1528870333.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:14.328Z,1528870334.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:14.724Z,1528870334.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:15.120Z,1528870335.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:15.526Z,1528870335.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:15.926Z,1528870335.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:16.320Z,1528870336.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:16.733Z,1528870336.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:17.133Z,1528870337.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:17.540Z,1528870337.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:17.923Z,1528870337.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:18.326Z,1528870338.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:18.720Z,1528870338.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:19.132Z,1528870339.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:19.531Z,1528870339.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:19.934Z,1528870339.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:20.336Z,1528870340.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:20.723Z,1528870340.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:21.122Z,1528870341.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:21.523Z,1528870341.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:21.926Z,1528870341.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:22.321Z,1528870342.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:22.737Z,1528870342.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:23.136Z,1528870343.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:23.534Z,1528870343.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:23.924Z,1528870343.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:24.337Z,1528870344.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:24.725Z,1528870344.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:25.124Z,1528870345.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:25.544Z,1528870345.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:25.933Z,1528870345.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:26.332Z,1528870346.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:26.734Z,1528870346.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:27.121Z,1528870347.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:27.533Z,1528870347.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:27.940Z,1528870347.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:28.320Z,1528870348.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:28.744Z,1528870348.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:29.146Z,1528870349.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:29.539Z,1528870349.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:29.921Z,1528870349.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:30.335Z,1528870350.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:33.454Z,1528870353.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:33.604Z,1528870353.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:34.006Z,1528870354.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:34.406Z,1528870354.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:34.804Z,1528870354.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:35.196Z,1528870355.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:35.582Z,1528870355.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:35.981Z,1528870355.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:36.386Z,1528870356.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:36.810Z,1528870356.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:37.208Z,1528870357.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:37.610Z,1528870357.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:37.988Z,1528870357.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:38.392Z,1528870358.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:38.785Z,1528870358.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:39.184Z,1528870359.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:39.612Z,1528870359.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:40.013Z,1528870360.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:40.414Z,1528870360.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:40.787Z,1528870360.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:41.188Z,1528870361.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:41.587Z,1528870361.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:41.992Z,1528870361.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:42.392Z,1528870362.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:42.795Z,1528870362.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:43.216Z,1528870363.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:43.617Z,1528870363.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:43.987Z,1528870363.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:44.388Z,1528870364.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:44.792Z,1528870364.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:45.186Z,1528870365.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:45.616Z,1528870365.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:46.017Z,1528870366.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:46.396Z,1528870366.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:46.788Z,1528870366.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:47.188Z,1528870367.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:47.586Z,1528870367.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:47.992Z,1528870367.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:48.388Z,1528870368.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:48.795Z,1528870368.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:49.196Z,1528870369.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:49.617Z,1528870369.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:49.988Z,1528870369.988 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:49.988Z,1528870369.988 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2018-06-13T06:12:49.988Z,1528870369.988 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:12:49.990Z,1528870369.990 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:49.990Z,1528870369.990 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56
2018-06-13T06:12:49.990Z,1528870369.990 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:12:49.992Z,1528870369.992 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:49.992Z,1528870369.992 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56
2018-06-13T06:12:49.992Z,1528870369.992 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:12:50.081Z,1528870370.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:12:50.081Z,1528870370.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:12:50.082Z,1528870370.082 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:12:50.465Z,1528870370.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:12:50.465Z,1528870370.465 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2018-06-13T06:12:50.466Z,1528870370.466 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:12:50.466Z,1528870370.466 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56
2018-06-13T06:12:50.466Z,1528870370.466 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:12:50.466Z,1528870370.466 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56
2018-06-13T06:12:50.794Z,1528870370.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:12:50.795Z,1528870370.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:12:50.795Z,1528870370.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:12:50.796Z,1528870370.796 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:12:50.796Z,1528870370.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:12:50.796Z,1528870370.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:12:50.797Z,1528870370.797 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:12:50.797Z,1528870370.797 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:12:50.797Z,1528870370.797 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:12:51.187Z,1528870371.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:12:51.188Z,1528870371.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:51.604Z,1528870371.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:12:51.605Z,1528870371.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:51.000Z,1528870372.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:12:52.001Z,1528870372.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:52.412Z,1528870372.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:12:52.417Z,1528870372.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:52.792Z,1528870372.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:12:52.793Z,1528870372.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:53.194Z,1528870373.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:12:53.195Z,1528870373.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:53.588Z,1528870373.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:12:53.590Z,1528870373.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:53.996Z,1528870373.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:12:53.997Z,1528870373.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:54.394Z,1528870374.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:12:54.395Z,1528870374.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:54.808Z,1528870374.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:12:54.809Z,1528870374.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:55.201Z,1528870375.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:12:55.202Z,1528870375.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:55.601Z,1528870375.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:12:55.602Z,1528870375.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:55.996Z,1528870375.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:12:56.006Z,1528870376.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:56.396Z,1528870376.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:12:56.397Z,1528870376.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:56.801Z,1528870376.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:12:56.802Z,1528870376.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:57.198Z,1528870377.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:12:57.199Z,1528870377.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:57.605Z,1528870377.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:12:57.606Z,1528870377.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:58.007Z,1528870378.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:12:58.007Z,1528870378.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:58.412Z,1528870378.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:12:58.418Z,1528870378.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:58.798Z,1528870378.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:12:58.798Z,1528870378.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:59.201Z,1528870379.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:12:59.202Z,1528870379.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:12:59.604Z,1528870379.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:12:59.605Z,1528870379.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:00.012Z,1528870380.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:13:00.017Z,1528870380.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:00.412Z,1528870380.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:13:00.417Z,1528870380.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:00.821Z,1528870380.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:13:00.822Z,1528870380.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:01.200Z,1528870381.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:13:01.217Z,1528870381.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:01.596Z,1528870381.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:13:01.597Z,1528870381.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:01.987Z,1528870381.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:13:01.988Z,1528870381.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:02.389Z,1528870382.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:13:02.390Z,1528870382.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:02.789Z,1528870382.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:13:02.790Z,1528870382.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:03.190Z,1528870383.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:13:03.191Z,1528870383.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:03.599Z,1528870383.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:13:03.600Z,1528870383.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:03.999Z,1528870383.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:13:03.000Z,1528870384.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:04.394Z,1528870384.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:13:04.395Z,1528870384.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:04.789Z,1528870384.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:13:04.790Z,1528870384.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:05.196Z,1528870385.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:13:05.197Z,1528870385.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:05.587Z,1528870385.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:13:05.588Z,1528870385.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:05.990Z,1528870385.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:13:05.991Z,1528870385.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:06.403Z,1528870386.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:13:06.404Z,1528870386.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:06.796Z,1528870386.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:13:06.797Z,1528870386.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:07.198Z,1528870387.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:13:07.199Z,1528870387.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:07.600Z,1528870387.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:13:07.601Z,1528870387.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:07.987Z,1528870387.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:13:07.988Z,1528870387.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:08.391Z,1528870388.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:13:08.392Z,1528870388.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:08.802Z,1528870388.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:13:08.803Z,1528870388.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:09.187Z,1528870389.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:13:09.188Z,1528870389.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:09.601Z,1528870389.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:13:09.602Z,1528870389.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:09.999Z,1528870389.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:10.397Z,1528870390.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:10.791Z,1528870390.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:11.190Z,1528870391.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:11.587Z,1528870391.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:11.991Z,1528870391.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:12.391Z,1528870392.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:12.796Z,1528870392.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:13.199Z,1528870393.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:13.596Z,1528870393.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:13.987Z,1528870393.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:14.391Z,1528870394.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:14.803Z,1528870394.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:15.187Z,1528870395.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:15.600Z,1528870395.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:15.999Z,1528870395.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:16.396Z,1528870396.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:16.790Z,1528870396.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:17.191Z,1528870397.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:17.587Z,1528870397.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:17.991Z,1528870397.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:18.390Z,1528870398.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:18.796Z,1528870398.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:19.200Z,1528870399.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:19.600Z,1528870399.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:19.988Z,1528870399.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:20.391Z,1528870400.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:20.803Z,1528870400.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:21.187Z,1528870401.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:21.600Z,1528870401.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:21.999Z,1528870401.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:22.396Z,1528870402.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:22.792Z,1528870402.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:23.195Z,1528870403.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:23.587Z,1528870403.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:23.992Z,1528870403.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:24.394Z,1528870404.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:24.797Z,1528870404.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:25.199Z,1528870405.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:25.600Z,1528870405.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:25.987Z,1528870405.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:26.393Z,1528870406.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:26.797Z,1528870406.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:27.188Z,1528870407.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:27.600Z,1528870407.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:27.999Z,1528870407.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:28.396Z,1528870408.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:28.793Z,1528870408.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:29.201Z,1528870409.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:29.587Z,1528870409.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:29.996Z,1528870409.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:30.395Z,1528870410.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:30.805Z,1528870410.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:31.203Z,1528870411.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:31.604Z,1528870411.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:34.703Z,1528870414.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:34.860Z,1528870414.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:35.253Z,1528870415.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:35.654Z,1528870415.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:36.045Z,1528870416.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:36.437Z,1528870416.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:36.838Z,1528870416.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:37.236Z,1528870417.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:37.649Z,1528870417.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:38.045Z,1528870418.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:38.446Z,1528870418.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:38.845Z,1528870418.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:39.236Z,1528870419.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:39.648Z,1528870419.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:40.038Z,1528870420.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:40.425Z,1528870420.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:40.855Z,1528870420.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:41.260Z,1528870421.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:41.662Z,1528870421.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:42.036Z,1528870422.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:42.433Z,1528870422.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:42.829Z,1528870422.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:43.233Z,1528870423.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:43.660Z,1528870423.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:44.040Z,1528870424.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:44.444Z,1528870424.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:44.834Z,1528870424.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:45.232Z,1528870425.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:45.634Z,1528870425.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:46.034Z,1528870426.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:46.432Z,1528870426.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:46.839Z,1528870426.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:47.243Z,1528870427.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:47.639Z,1528870427.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:48.033Z,1528870428.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:48.434Z,1528870428.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:48.832Z,1528870428.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:49.234Z,1528870429.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:49.639Z,1528870429.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:50.039Z,1528870430.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:50.439Z,1528870430.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:50.833Z,1528870430.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:51.232Z,1528870431.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:51.633Z,1528870431.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:52.034Z,1528870432.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:52.431Z,1528870432.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:52.843Z,1528870432.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:53.244Z,1528870433.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:53.639Z,1528870433.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:54.040Z,1528870434.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:54.434Z,1528870434.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:54.832Z,1528870434.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:55.233Z,1528870435.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:55.639Z,1528870435.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:56.043Z,1528870436.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:56.439Z,1528870436.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:56.836Z,1528870436.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:57.234Z,1528870437.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:57.640Z,1528870437.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:58.034Z,1528870438.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:58.431Z,1528870438.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:58.839Z,1528870438.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:59.242Z,1528870439.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:13:59.643Z,1528870439.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:00.032Z,1528870440.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:00.440Z,1528870440.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:00.836Z,1528870440.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:01.233Z,1528870441.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:01.639Z,1528870441.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:02.042Z,1528870442.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:02.443Z,1528870442.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:02.835Z,1528870442.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:03.235Z,1528870443.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:03.634Z,1528870443.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:04.036Z,1528870444.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:04.435Z,1528870444.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:04.840Z,1528870444.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:05.242Z,1528870445.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:05.647Z,1528870445.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:06.040Z,1528870446.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:06.440Z,1528870446.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:06.835Z,1528870446.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:07.233Z,1528870447.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:07.640Z,1528870447.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:08.043Z,1528870448.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:08.439Z,1528870448.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:08.834Z,1528870448.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:09.235Z,1528870449.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:09.634Z,1528870449.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:10.034Z,1528870450.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:10.446Z,1528870450.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:10.840Z,1528870450.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:11.243Z,1528870451.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:11.644Z,1528870451.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:12.034Z,1528870452.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:12.447Z,1528870452.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:12.840Z,1528870452.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:13.248Z,1528870453.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:13.644Z,1528870453.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:14.048Z,1528870454.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:14.448Z,1528870454.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:14.838Z,1528870454.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:15.235Z,1528870455.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:15.636Z,1528870455.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:16.039Z,1528870456.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:16.436Z,1528870456.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:16.844Z,1528870456.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:17.245Z,1528870457.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:17.645Z,1528870457.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:18.036Z,1528870458.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:18.440Z,1528870458.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:18.846Z,1528870458.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:19.247Z,1528870459.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:19.646Z,1528870459.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:20.051Z,1528870460.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:20.446Z,1528870460.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:20.837Z,1528870460.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:21.240Z,1528870461.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:21.638Z,1528870461.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:22.042Z,1528870462.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:22.439Z,1528870462.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:22.847Z,1528870462.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:23.250Z,1528870463.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:23.647Z,1528870463.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:24.038Z,1528870464.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:24.446Z,1528870464.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:24.836Z,1528870464.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:25.246Z,1528870465.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:25.656Z,1528870465.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:26.056Z,1528870466.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:26.447Z,1528870466.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:26.848Z,1528870466.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:27.244Z,1528870467.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:27.628Z,1528870467.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:28.028Z,1528870468.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:28.428Z,1528870468.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:28.859Z,1528870468.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:29.256Z,1528870469.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:29.655Z,1528870469.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:30.033Z,1528870470.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:30.036Z,1528870470.036 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T06:14:30.036Z,1528870470.036 [Default:CheckIn:C.Wait] Stopped
2018-06-13T06:14:30.036Z,1528870470.036 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T06:14:30.036Z,1528870470.036 [Default:CheckIn:D] Running Loop=1
2018-06-13T06:14:30.448Z,1528870470.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:30.451Z,1528870470.451 [Default:CheckIn:D] Stopped
2018-06-13T06:14:30.451Z,1528870470.451 [Default:CheckIn:E] Running Loop=1
2018-06-13T06:14:33.565Z,1528870473.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:33.568Z,1528870473.568 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 167.283431 min 
2018-06-13T06:14:33.568Z,1528870473.568 [Default:CheckIn:E] Stopped
2018-06-13T06:14:33.569Z,1528870473.569 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T06:14:33.569Z,1528870473.569 [Default:CheckIn] Stopped
2018-06-13T06:14:33.569Z,1528870473.569 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T06:14:33.569Z,1528870473.569 [Default:CheckIn](INFO): Running loop #17
2018-06-13T06:14:33.569Z,1528870473.569 [Default:CheckIn] Running Loop=17
2018-06-13T06:14:33.569Z,1528870473.569 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T06:14:33.569Z,1528870473.569 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T06:14:33.725Z,1528870473.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:34.136Z,1528870474.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:34.511Z,1528870474.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:34.911Z,1528870474.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:35.302Z,1528870475.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:35.699Z,1528870475.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:36.103Z,1528870476.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:36.502Z,1528870476.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:36.911Z,1528870476.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:37.311Z,1528870477.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:37.712Z,1528870477.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:38.099Z,1528870478.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:38.503Z,1528870478.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:38.912Z,1528870478.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:39.303Z,1528870479.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:39.711Z,1528870479.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:40.111Z,1528870480.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:40.508Z,1528870480.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:40.903Z,1528870480.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:41.302Z,1528870481.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:41.700Z,1528870481.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:42.103Z,1528870482.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:42.506Z,1528870482.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:42.912Z,1528870482.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:43.312Z,1528870483.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:43.712Z,1528870483.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:44.099Z,1528870484.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:44.504Z,1528870484.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:44.909Z,1528870484.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:45.301Z,1528870485.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:45.714Z,1528870485.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:46.115Z,1528870486.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:46.517Z,1528870486.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:46.904Z,1528870486.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:47.305Z,1528870487.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:47.701Z,1528870487.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:48.105Z,1528870488.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:48.503Z,1528870488.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:48.913Z,1528870488.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:49.320Z,1528870489.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:49.712Z,1528870489.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:50.101Z,1528870490.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:50.505Z,1528870490.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:50.917Z,1528870490.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:51.320Z,1528870491.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:51.713Z,1528870491.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:52.117Z,1528870492.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:52.519Z,1528870492.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:52.904Z,1528870492.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:53.307Z,1528870493.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:53.705Z,1528870493.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:54.104Z,1528870494.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:54.506Z,1528870494.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:54.918Z,1528870494.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:55.318Z,1528870495.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:55.713Z,1528870495.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:56.106Z,1528870496.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:56.504Z,1528870496.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:56.920Z,1528870496.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:57.312Z,1528870497.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:57.713Z,1528870497.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:58.118Z,1528870498.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:58.514Z,1528870498.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:58.912Z,1528870498.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:59.316Z,1528870499.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:14:59.692Z,1528870499.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:00.114Z,1528870500.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:00.520Z,1528870500.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:00.924Z,1528870500.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:01.323Z,1528870501.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:01.728Z,1528870501.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:02.100Z,1528870502.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:02.504Z,1528870502.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:02.921Z,1528870502.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:03.300Z,1528870503.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:03.727Z,1528870503.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:04.132Z,1528870504.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:04.507Z,1528870504.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:04.901Z,1528870504.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:05.301Z,1528870505.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:05.699Z,1528870505.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:06.101Z,1528870506.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:06.501Z,1528870506.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:06.925Z,1528870506.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:07.330Z,1528870507.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:07.708Z,1528870507.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:08.099Z,1528870508.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:08.509Z,1528870508.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:08.902Z,1528870508.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:09.300Z,1528870509.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:09.712Z,1528870509.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:10.112Z,1528870510.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:10.512Z,1528870510.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:10.902Z,1528870510.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:11.302Z,1528870511.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:11.700Z,1528870511.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:12.101Z,1528870512.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:12.502Z,1528870512.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:12.907Z,1528870512.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:13.311Z,1528870513.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:13.709Z,1528870513.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:14.099Z,1528870514.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:14.502Z,1528870514.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:14.902Z,1528870514.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:15.299Z,1528870515.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:15.707Z,1528870515.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:16.111Z,1528870516.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:16.507Z,1528870516.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:16.902Z,1528870516.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:17.302Z,1528870517.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:17.707Z,1528870517.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:18.111Z,1528870518.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:18.508Z,1528870518.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:18.899Z,1528870518.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:19.302Z,1528870519.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:19.708Z,1528870519.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:20.107Z,1528870520.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:20.507Z,1528870520.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:20.902Z,1528870520.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:21.299Z,1528870521.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:21.707Z,1528870521.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:22.111Z,1528870522.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:22.507Z,1528870522.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:22.902Z,1528870522.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:23.303Z,1528870523.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:23.707Z,1528870523.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:24.115Z,1528870524.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:24.508Z,1528870524.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:24.899Z,1528870524.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:25.301Z,1528870525.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:25.708Z,1528870525.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:26.108Z,1528870526.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:26.507Z,1528870526.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:26.902Z,1528870526.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:27.299Z,1528870527.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:27.712Z,1528870527.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:28.112Z,1528870528.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:28.508Z,1528870528.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:28.903Z,1528870528.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:29.302Z,1528870529.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:29.708Z,1528870529.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:30.111Z,1528870530.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:30.512Z,1528870530.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:33.637Z,1528870533.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:33.796Z,1528870533.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:34.196Z,1528870534.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:34.594Z,1528870534.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:34.992Z,1528870534.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:35.368Z,1528870535.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:35.768Z,1528870535.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:36.185Z,1528870536.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:36.572Z,1528870536.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:36.987Z,1528870536.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:37.399Z,1528870537.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:37.783Z,1528870537.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:38.175Z,1528870538.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:38.573Z,1528870538.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:38.987Z,1528870538.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:39.371Z,1528870539.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:39.779Z,1528870539.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:40.183Z,1528870540.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:40.580Z,1528870540.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:40.990Z,1528870540.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:41.388Z,1528870541.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:41.771Z,1528870541.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:42.176Z,1528870542.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:42.583Z,1528870542.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:42.985Z,1528870542.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:43.388Z,1528870543.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:43.783Z,1528870543.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:44.171Z,1528870544.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:44.584Z,1528870544.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:44.978Z,1528870544.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:45.376Z,1528870545.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:45.789Z,1528870545.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:46.188Z,1528870546.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:46.586Z,1528870546.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:46.977Z,1528870546.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:47.384Z,1528870547.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:47.775Z,1528870547.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:48.180Z,1528870548.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:48.583Z,1528870548.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:48.987Z,1528870548.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:49.396Z,1528870549.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:49.790Z,1528870549.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:50.181Z,1528870550.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:50.586Z,1528870550.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:50.982Z,1528870550.982 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:50.982Z,1528870550.982 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2018-06-13T06:15:50.982Z,1528870550.982 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:15:50.984Z,1528870550.984 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:50.984Z,1528870550.984 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57
2018-06-13T06:15:50.984Z,1528870550.984 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:15:50.986Z,1528870550.986 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:50.986Z,1528870550.986 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57
2018-06-13T06:15:50.986Z,1528870550.986 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:15:51.057Z,1528870551.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:15:51.057Z,1528870551.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:15:51.058Z,1528870551.058 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:15:51.461Z,1528870551.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:15:51.461Z,1528870551.461 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2018-06-13T06:15:51.462Z,1528870551.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:15:51.462Z,1528870551.462 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57
2018-06-13T06:15:51.462Z,1528870551.462 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:15:51.462Z,1528870551.462 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57
2018-06-13T06:15:51.796Z,1528870551.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:15:51.796Z,1528870551.796 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:15:51.797Z,1528870551.797 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:15:51.798Z,1528870551.798 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:15:51.798Z,1528870551.798 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:15:51.799Z,1528870551.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:15:51.799Z,1528870551.799 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:15:51.799Z,1528870551.799 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:15:51.800Z,1528870551.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:15:52.195Z,1528870552.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:15:52.196Z,1528870552.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:52.592Z,1528870552.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:15:52.597Z,1528870552.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:52.968Z,1528870552.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:15:52.970Z,1528870552.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:53.384Z,1528870553.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:15:53.389Z,1528870553.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:53.772Z,1528870553.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:15:53.773Z,1528870553.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:54.176Z,1528870554.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:15:54.178Z,1528870554.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:54.571Z,1528870554.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:15:54.572Z,1528870554.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:54.979Z,1528870554.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:15:54.980Z,1528870554.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:55.408Z,1528870555.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:15:55.409Z,1528870555.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:55.778Z,1528870555.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:15:55.779Z,1528870555.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:56.172Z,1528870556.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:15:56.173Z,1528870556.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:56.574Z,1528870556.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:15:56.575Z,1528870556.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:56.974Z,1528870556.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:15:56.974Z,1528870556.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:57.372Z,1528870557.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:15:57.373Z,1528870557.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:57.783Z,1528870557.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:15:57.784Z,1528870557.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:58.186Z,1528870558.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:15:58.187Z,1528870558.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:58.578Z,1528870558.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:15:58.579Z,1528870558.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:58.973Z,1528870558.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:15:58.974Z,1528870558.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:59.373Z,1528870559.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:15:59.374Z,1528870559.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:15:59.771Z,1528870559.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:15:59.772Z,1528870559.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:00.175Z,1528870560.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:16:00.176Z,1528870560.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:00.573Z,1528870560.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:16:00.574Z,1528870560.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:00.981Z,1528870560.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:16:00.982Z,1528870560.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:01.383Z,1528870561.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:16:01.384Z,1528870561.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:01.778Z,1528870561.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:16:01.779Z,1528870561.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:02.176Z,1528870562.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:16:02.177Z,1528870562.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:02.575Z,1528870562.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:16:02.576Z,1528870562.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:02.979Z,1528870562.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:16:02.980Z,1528870562.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:03.375Z,1528870563.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:16:03.376Z,1528870563.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:03.782Z,1528870563.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:16:03.783Z,1528870563.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:04.183Z,1528870564.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:16:04.184Z,1528870564.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:04.580Z,1528870564.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:16:04.580Z,1528870564.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:04.975Z,1528870564.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:16:04.976Z,1528870564.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:05.374Z,1528870565.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:16:05.375Z,1528870565.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:05.783Z,1528870565.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:16:05.784Z,1528870565.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:06.183Z,1528870566.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:16:06.184Z,1528870566.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:06.579Z,1528870566.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:16:06.580Z,1528870566.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:06.976Z,1528870566.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:16:06.978Z,1528870566.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:07.375Z,1528870567.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:16:07.376Z,1528870567.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:07.783Z,1528870567.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:16:07.784Z,1528870567.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:08.186Z,1528870568.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:16:08.187Z,1528870568.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:08.584Z,1528870568.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:16:08.585Z,1528870568.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:08.985Z,1528870568.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:16:08.986Z,1528870568.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:09.375Z,1528870569.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:16:09.376Z,1528870569.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:09.784Z,1528870569.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:16:09.785Z,1528870569.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:10.182Z,1528870570.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:16:10.183Z,1528870570.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:10.588Z,1528870570.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:16:10.589Z,1528870570.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:10.975Z,1528870570.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T06:16:10.976Z,1528870570.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:11.376Z,1528870571.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:11.789Z,1528870571.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:12.187Z,1528870572.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:12.588Z,1528870572.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:12.980Z,1528870572.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:13.374Z,1528870573.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:13.792Z,1528870573.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:14.188Z,1528870574.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:14.587Z,1528870574.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:14.979Z,1528870574.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:15.375Z,1528870575.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:15.786Z,1528870575.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:16.192Z,1528870576.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:16.596Z,1528870576.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:16.977Z,1528870576.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:17.375Z,1528870577.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:17.790Z,1528870577.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:18.192Z,1528870578.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:18.585Z,1528870578.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:18.980Z,1528870578.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:19.376Z,1528870579.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:19.783Z,1528870579.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:20.196Z,1528870580.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:20.592Z,1528870580.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:20.989Z,1528870580.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:21.423Z,1528870581.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:21.784Z,1528870581.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:22.188Z,1528870582.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:22.590Z,1528870582.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:22.976Z,1528870582.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:23.388Z,1528870583.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:23.789Z,1528870583.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:24.188Z,1528870584.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:24.588Z,1528870584.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:24.978Z,1528870584.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:25.384Z,1528870585.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:25.785Z,1528870585.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:26.190Z,1528870586.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:26.596Z,1528870586.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:26.988Z,1528870586.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:27.384Z,1528870587.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:27.789Z,1528870587.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:28.190Z,1528870588.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:28.589Z,1528870588.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:28.978Z,1528870588.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:29.384Z,1528870589.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:29.786Z,1528870589.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:30.189Z,1528870590.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:30.587Z,1528870590.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:33.690Z,1528870593.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:33.848Z,1528870593.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:34.239Z,1528870594.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:34.635Z,1528870594.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:35.031Z,1528870595.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:35.436Z,1528870595.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:35.829Z,1528870595.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:36.231Z,1528870596.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:36.639Z,1528870596.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:37.036Z,1528870597.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:37.444Z,1528870597.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:37.839Z,1528870597.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:38.226Z,1528870598.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:38.636Z,1528870598.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:39.015Z,1528870599.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:39.412Z,1528870599.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:39.844Z,1528870599.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:40.248Z,1528870600.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:40.648Z,1528870600.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:41.024Z,1528870601.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:41.419Z,1528870601.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:41.824Z,1528870601.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:42.228Z,1528870602.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:42.624Z,1528870602.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:43.017Z,1528870603.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:43.418Z,1528870603.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:43.850Z,1528870603.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:44.228Z,1528870604.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:44.628Z,1528870604.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:45.018Z,1528870605.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:45.416Z,1528870605.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:45.828Z,1528870605.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:46.255Z,1528870606.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:46.623Z,1528870606.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:47.018Z,1528870607.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:47.418Z,1528870607.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:47.824Z,1528870607.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:48.228Z,1528870608.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:48.624Z,1528870608.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:49.016Z,1528870609.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:49.418Z,1528870609.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:49.825Z,1528870609.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:50.224Z,1528870610.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:50.628Z,1528870610.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:51.018Z,1528870611.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:51.419Z,1528870611.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:51.824Z,1528870611.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:52.228Z,1528870612.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:52.624Z,1528870612.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:53.019Z,1528870613.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:53.419Z,1528870613.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:53.823Z,1528870613.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:54.228Z,1528870614.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:54.625Z,1528870614.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:55.016Z,1528870615.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:55.418Z,1528870615.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:55.824Z,1528870615.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:56.223Z,1528870616.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:56.649Z,1528870616.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:57.020Z,1528870617.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:57.417Z,1528870617.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:57.824Z,1528870617.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:58.244Z,1528870618.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:58.628Z,1528870618.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:59.022Z,1528870619.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:59.424Z,1528870619.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:16:59.828Z,1528870619.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:00.228Z,1528870620.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:00.628Z,1528870620.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:01.016Z,1528870621.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:01.419Z,1528870621.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:01.828Z,1528870621.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:02.229Z,1528870622.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:02.628Z,1528870622.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:03.024Z,1528870623.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:03.415Z,1528870623.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:03.832Z,1528870623.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:04.229Z,1528870624.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:04.628Z,1528870624.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:05.022Z,1528870625.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:05.419Z,1528870625.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:05.836Z,1528870625.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:06.236Z,1528870626.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:06.628Z,1528870626.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:07.020Z,1528870627.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:07.421Z,1528870627.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:07.828Z,1528870627.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:08.230Z,1528870628.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:08.632Z,1528870628.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:09.031Z,1528870629.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:09.418Z,1528870629.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:09.836Z,1528870629.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:10.234Z,1528870630.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:10.632Z,1528870630.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:11.023Z,1528870631.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:11.423Z,1528870631.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:11.831Z,1528870631.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:12.240Z,1528870632.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:12.636Z,1528870632.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:13.022Z,1528870633.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:13.421Z,1528870633.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:13.822Z,1528870633.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:14.235Z,1528870634.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:14.650Z,1528870634.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:15.040Z,1528870635.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:15.432Z,1528870635.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:15.831Z,1528870635.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:16.230Z,1528870636.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:16.632Z,1528870636.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:17.043Z,1528870637.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:17.447Z,1528870637.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:17.844Z,1528870637.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:18.228Z,1528870638.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:18.614Z,1528870638.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:19.014Z,1528870639.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:19.417Z,1528870639.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:19.817Z,1528870639.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:20.249Z,1528870640.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:20.628Z,1528870640.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:21.025Z,1528870641.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:21.416Z,1528870641.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:21.824Z,1528870641.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:22.219Z,1528870642.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:22.616Z,1528870642.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:23.028Z,1528870643.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:23.428Z,1528870643.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:23.823Z,1528870643.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:24.224Z,1528870644.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:24.618Z,1528870644.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:25.016Z,1528870645.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:25.424Z,1528870645.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:25.818Z,1528870645.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:26.224Z,1528870646.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:26.652Z,1528870646.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:27.024Z,1528870647.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:27.416Z,1528870647.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:27.820Z,1528870647.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:28.232Z,1528870648.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:28.615Z,1528870648.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:29.028Z,1528870649.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:29.429Z,1528870649.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:29.824Z,1528870649.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:30.223Z,1528870650.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:30.621Z,1528870650.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:33.728Z,1528870653.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:33.884Z,1528870653.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:34.305Z,1528870654.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:34.702Z,1528870654.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:35.083Z,1528870655.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:35.488Z,1528870655.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:35.875Z,1528870655.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:36.280Z,1528870656.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:36.678Z,1528870656.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:37.083Z,1528870657.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:37.492Z,1528870657.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:37.883Z,1528870657.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:38.279Z,1528870658.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:38.678Z,1528870658.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:39.078Z,1528870659.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:39.475Z,1528870659.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:39.887Z,1528870659.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:40.287Z,1528870660.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:40.683Z,1528870660.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:41.079Z,1528870661.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:41.478Z,1528870661.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:41.884Z,1528870661.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:42.288Z,1528870662.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:42.688Z,1528870662.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:43.080Z,1528870663.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:43.479Z,1528870663.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:43.888Z,1528870663.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:44.284Z,1528870664.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:44.688Z,1528870664.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:45.086Z,1528870665.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:45.475Z,1528870665.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:45.887Z,1528870665.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:46.287Z,1528870666.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:46.684Z,1528870666.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:47.083Z,1528870667.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:47.481Z,1528870667.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:47.885Z,1528870667.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:48.287Z,1528870668.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:48.688Z,1528870668.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:49.080Z,1528870669.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:49.479Z,1528870669.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:49.887Z,1528870669.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:50.284Z,1528870670.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:50.688Z,1528870670.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:51.081Z,1528870671.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:51.476Z,1528870671.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:51.880Z,1528870671.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:52.288Z,1528870672.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:52.684Z,1528870672.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:53.088Z,1528870673.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:53.488Z,1528870673.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:53.876Z,1528870673.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:54.276Z,1528870674.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:54.682Z,1528870674.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:55.084Z,1528870675.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:55.487Z,1528870675.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:55.888Z,1528870675.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:56.275Z,1528870676.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:56.690Z,1528870676.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:57.090Z,1528870677.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:57.476Z,1528870677.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:57.883Z,1528870677.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:58.292Z,1528870678.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:58.688Z,1528870678.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:59.086Z,1528870679.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:59.480Z,1528870679.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:17:59.876Z,1528870679.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:00.280Z,1528870680.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:00.679Z,1528870680.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:01.085Z,1528870681.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:01.488Z,1528870681.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:01.892Z,1528870681.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:02.276Z,1528870682.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:02.680Z,1528870682.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:03.079Z,1528870683.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:03.477Z,1528870683.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:03.880Z,1528870683.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:04.288Z,1528870684.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:04.684Z,1528870684.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:05.088Z,1528870685.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:05.488Z,1528870685.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:05.880Z,1528870685.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:06.286Z,1528870686.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:06.678Z,1528870686.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:07.087Z,1528870687.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:07.492Z,1528870687.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:07.888Z,1528870687.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:08.280Z,1528870688.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:08.679Z,1528870688.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:09.081Z,1528870689.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:09.480Z,1528870689.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:09.879Z,1528870689.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:10.284Z,1528870690.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:10.687Z,1528870690.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:11.087Z,1528870691.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:11.478Z,1528870691.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:11.879Z,1528870691.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:12.279Z,1528870692.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:12.678Z,1528870692.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:13.085Z,1528870693.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:13.487Z,1528870693.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:13.888Z,1528870693.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:14.279Z,1528870694.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:14.678Z,1528870694.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:15.082Z,1528870695.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:15.479Z,1528870695.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:15.882Z,1528870695.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:16.283Z,1528870696.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:16.687Z,1528870696.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:17.088Z,1528870697.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:17.478Z,1528870697.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:17.880Z,1528870697.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:18.282Z,1528870698.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:18.678Z,1528870698.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:19.087Z,1528870699.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:19.487Z,1528870699.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:19.892Z,1528870699.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:20.288Z,1528870700.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:20.682Z,1528870700.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:21.097Z,1528870701.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:21.485Z,1528870701.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:21.882Z,1528870701.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:22.288Z,1528870702.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:22.694Z,1528870702.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:23.091Z,1528870703.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:23.483Z,1528870703.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:23.884Z,1528870703.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:24.279Z,1528870704.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:24.683Z,1528870704.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:25.092Z,1528870705.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:25.492Z,1528870705.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:25.896Z,1528870705.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:26.282Z,1528870706.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:26.682Z,1528870706.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:27.082Z,1528870707.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:27.482Z,1528870707.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:27.881Z,1528870707.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:28.296Z,1528870708.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:28.696Z,1528870708.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:29.088Z,1528870709.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:29.486Z,1528870709.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:29.882Z,1528870709.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:30.288Z,1528870710.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:30.683Z,1528870710.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:33.804Z,1528870713.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:33.988Z,1528870713.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:34.384Z,1528870714.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:34.778Z,1528870714.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:35.177Z,1528870715.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:35.559Z,1528870715.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:35.992Z,1528870715.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:36.385Z,1528870716.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:36.786Z,1528870716.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:37.184Z,1528870717.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:37.568Z,1528870717.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:37.991Z,1528870717.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:38.395Z,1528870718.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:38.779Z,1528870718.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:39.168Z,1528870719.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:39.571Z,1528870719.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:39.975Z,1528870719.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:40.379Z,1528870720.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:40.779Z,1528870720.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:41.170Z,1528870721.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:41.571Z,1528870721.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:41.979Z,1528870721.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:42.379Z,1528870722.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:42.775Z,1528870722.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:43.168Z,1528870723.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:43.570Z,1528870723.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:43.976Z,1528870723.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:44.379Z,1528870724.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:44.779Z,1528870724.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:45.176Z,1528870725.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:45.568Z,1528870725.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:45.979Z,1528870725.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:46.376Z,1528870726.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:46.780Z,1528870726.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:47.171Z,1528870727.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:47.571Z,1528870727.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:47.976Z,1528870727.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:48.384Z,1528870728.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:48.776Z,1528870728.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:49.166Z,1528870729.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:49.568Z,1528870729.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:49.969Z,1528870729.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:50.372Z,1528870730.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:50.780Z,1528870730.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:51.177Z,1528870731.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:51.564Z,1528870731.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:51.969Z,1528870731.969 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:51.969Z,1528870731.969 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2018-06-13T06:18:51.969Z,1528870731.969 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:18:51.971Z,1528870731.971 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:51.971Z,1528870731.971 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58
2018-06-13T06:18:51.971Z,1528870731.971 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:18:51.973Z,1528870731.973 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:51.973Z,1528870731.973 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58
2018-06-13T06:18:51.973Z,1528870731.973 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:18:52.045Z,1528870732.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:18:52.045Z,1528870732.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:18:52.046Z,1528870732.046 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:18:52.453Z,1528870732.453 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:18:52.453Z,1528870732.453 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2018-06-13T06:18:52.453Z,1528870732.453 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:18:52.454Z,1528870732.454 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58
2018-06-13T06:18:52.454Z,1528870732.454 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:18:52.454Z,1528870732.454 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58
2018-06-13T06:18:52.775Z,1528870732.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:18:52.775Z,1528870732.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:18:52.775Z,1528870732.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:18:52.776Z,1528870732.776 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:18:52.776Z,1528870732.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:18:52.776Z,1528870732.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:18:52.777Z,1528870732.777 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:18:52.777Z,1528870732.777 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:18:52.778Z,1528870732.778 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:18:53.176Z,1528870733.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:18:53.178Z,1528870733.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:53.588Z,1528870733.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:18:53.589Z,1528870733.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:53.982Z,1528870733.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:18:53.982Z,1528870733.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:54.360Z,1528870734.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:18:54.369Z,1528870734.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:54.760Z,1528870734.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:18:54.761Z,1528870734.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:55.160Z,1528870735.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:18:55.161Z,1528870735.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:55.568Z,1528870735.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:18:55.569Z,1528870735.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:55.964Z,1528870735.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:18:55.965Z,1528870735.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:56.371Z,1528870736.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:18:56.371Z,1528870736.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:56.794Z,1528870736.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:18:56.795Z,1528870736.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:57.171Z,1528870737.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:18:57.172Z,1528870737.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:57.563Z,1528870737.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:18:57.564Z,1528870737.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:57.968Z,1528870737.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:18:57.969Z,1528870737.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:58.367Z,1528870738.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:18:58.368Z,1528870738.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:58.764Z,1528870738.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:18:58.765Z,1528870738.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:59.171Z,1528870739.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:18:59.172Z,1528870739.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:59.575Z,1528870739.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:18:59.576Z,1528870739.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:18:59.972Z,1528870739.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:18:59.973Z,1528870739.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:00.366Z,1528870740.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:19:00.367Z,1528870740.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:00.767Z,1528870740.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:19:00.768Z,1528870740.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:01.163Z,1528870741.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:19:01.164Z,1528870741.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:01.567Z,1528870741.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:19:01.568Z,1528870741.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:01.969Z,1528870741.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:19:01.970Z,1528870741.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:02.372Z,1528870742.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:19:02.373Z,1528870742.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:02.775Z,1528870742.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:19:02.776Z,1528870742.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:03.175Z,1528870743.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:19:03.176Z,1528870743.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:03.563Z,1528870743.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:19:03.564Z,1528870743.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:03.967Z,1528870743.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:19:03.968Z,1528870743.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:04.367Z,1528870744.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:19:04.368Z,1528870744.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:04.772Z,1528870744.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:19:04.773Z,1528870744.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:05.180Z,1528870745.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:19:05.181Z,1528870745.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:05.580Z,1528870745.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:19:05.581Z,1528870745.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:05.976Z,1528870745.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:19:05.976Z,1528870745.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:06.371Z,1528870746.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:19:06.372Z,1528870746.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:06.768Z,1528870746.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:19:06.769Z,1528870746.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:07.167Z,1528870747.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:19:07.168Z,1528870747.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:07.568Z,1528870747.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:19:07.569Z,1528870747.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:07.970Z,1528870747.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:19:07.970Z,1528870747.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:08.376Z,1528870748.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:19:08.377Z,1528870748.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:08.780Z,1528870748.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:19:08.781Z,1528870748.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:09.175Z,1528870749.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:19:09.176Z,1528870749.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:09.567Z,1528870749.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:19:09.568Z,1528870749.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:09.967Z,1528870749.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:19:09.968Z,1528870749.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:10.368Z,1528870750.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:19:10.369Z,1528870750.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:10.763Z,1528870750.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:19:10.764Z,1528870750.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:11.178Z,1528870751.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:19:11.179Z,1528870751.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:11.580Z,1528870751.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:19:11.581Z,1528870751.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:11.976Z,1528870751.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:12.378Z,1528870752.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:12.771Z,1528870752.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:13.169Z,1528870753.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:13.569Z,1528870753.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:13.970Z,1528870753.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:14.384Z,1528870754.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:14.780Z,1528870754.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:15.181Z,1528870755.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:15.568Z,1528870755.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:15.971Z,1528870755.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:16.376Z,1528870756.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:16.765Z,1528870756.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:17.181Z,1528870757.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:17.588Z,1528870757.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:17.982Z,1528870757.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:18.368Z,1528870758.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:18.776Z,1528870758.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:19.171Z,1528870759.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:19.576Z,1528870759.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:19.971Z,1528870759.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:20.382Z,1528870760.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:20.784Z,1528870760.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:21.185Z,1528870761.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:21.581Z,1528870761.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:21.970Z,1528870761.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:22.384Z,1528870762.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:22.782Z,1528870762.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:23.181Z,1528870763.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:23.582Z,1528870763.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:23.984Z,1528870763.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:24.381Z,1528870764.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:24.761Z,1528870764.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:25.161Z,1528870765.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:25.588Z,1528870765.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:25.967Z,1528870765.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:26.401Z,1528870766.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:26.793Z,1528870766.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:27.194Z,1528870767.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:27.569Z,1528870767.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:27.968Z,1528870767.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:28.366Z,1528870768.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:28.767Z,1528870768.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:29.193Z,1528870769.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:29.595Z,1528870769.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:29.993Z,1528870769.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:30.367Z,1528870770.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:30.789Z,1528870770.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:33.875Z,1528870773.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:33.903Z,1528870773.903 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T06:14:33.6Z
2018-06-13T06:19:33.903Z,1528870773.903 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T06:19:33.903Z,1528870773.903 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T06:19:34.053Z,1528870774.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:35.204Z,1528870775.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:35.395Z,1528870775.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:35.757Z,1528870775.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:36.150Z,1528870776.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:39.255Z,1528870779.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:39.345Z,1528870779.345 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0068.lzma
2018-06-13T06:19:39.423Z,1528870779.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:39.807Z,1528870779.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:40.142Z,1528870780.142 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0068.lzma.bak
2018-06-13T06:19:40.142Z,1528870780.142 [DataOverHttps](INFO): SBD MOMSN=8328723
2018-06-13T06:19:40.218Z,1528870780.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:42.075Z,1528870782.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:42.252Z,1528870782.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:42.646Z,1528870782.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:43.054Z,1528870783.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:43.434Z,1528870783.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:43.833Z,1528870783.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:44.262Z,1528870784.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:44.662Z,1528870784.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:45.062Z,1528870785.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:45.457Z,1528870785.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:48.569Z,1528870788.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:48.716Z,1528870788.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:49.055Z,1528870789.055 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T06:19:49.055Z,1528870789.055 [NAL9602] Data Fault, FailCount= 1
2018-06-13T06:19:49.055Z,1528870789.055 [NAL9602](ERROR): Data Fault
2018-06-13T06:19:49.109Z,1528870789.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:49.193Z,1528870789.193 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T06:19:49.458Z,1528870789.458 [NAL9602](INFO): Powering down
2018-06-13T06:19:49.493Z,1528870789.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:49.895Z,1528870789.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:50.295Z,1528870790.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:50.397Z,1528870790.397 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T06:19:50.397Z,1528870790.397 [NAL9602] No Fault, FailCount= 1
2018-06-13T06:19:50.692Z,1528870790.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:51.095Z,1528870791.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:51.491Z,1528870791.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:54.620Z,1528870794.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:54.715Z,1528870794.715 [DataOverHttps](INFO): Sending 97 bytes from file Logs/20180613T032335/Express0069.lzma
2018-06-13T06:19:54.781Z,1528870794.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:55.179Z,1528870795.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:55.510Z,1528870795.510 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0069.lzma.bak
2018-06-13T06:19:55.510Z,1528870795.510 [DataOverHttps](INFO): SBD MOMSN=8328725
2018-06-13T06:19:55.571Z,1528870795.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:57.434Z,1528870797.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:57.436Z,1528870797.436 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T06:19:57.437Z,1528870797.437 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T06:19:57.437Z,1528870797.437 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T06:19:57.584Z,1528870797.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:19:57.985Z,1528870797.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:01.101Z,1528870801.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:01.270Z,1528870801.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:01.680Z,1528870801.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:02.082Z,1528870802.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:02.464Z,1528870802.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:02.864Z,1528870802.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:03.268Z,1528870803.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:03.659Z,1528870803.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:04.064Z,1528870804.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:04.464Z,1528870804.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:04.863Z,1528870804.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:05.263Z,1528870805.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:05.664Z,1528870805.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:06.063Z,1528870806.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:06.463Z,1528870806.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:06.865Z,1528870806.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:07.263Z,1528870807.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:07.664Z,1528870807.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:08.064Z,1528870808.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:08.463Z,1528870808.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:08.865Z,1528870808.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:09.264Z,1528870809.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:09.660Z,1528870809.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:10.064Z,1528870810.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:10.464Z,1528870810.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:10.860Z,1528870810.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:11.264Z,1528870811.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:11.670Z,1528870811.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:12.063Z,1528870812.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:12.468Z,1528870812.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:12.865Z,1528870812.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:13.263Z,1528870813.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:13.665Z,1528870813.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:14.062Z,1528870814.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:14.463Z,1528870814.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:14.864Z,1528870814.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:15.264Z,1528870815.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:15.663Z,1528870815.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:16.064Z,1528870816.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:16.544Z,1528870816.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:16.938Z,1528870816.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:17.311Z,1528870817.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:17.766Z,1528870817.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:18.165Z,1528870818.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:18.468Z,1528870818.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:18.863Z,1528870818.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:19.263Z,1528870819.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:19.629Z,1528870819.629 [NAL9602](INFO): Powering up NAL9602
2018-06-13T06:20:19.665Z,1528870819.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:20.066Z,1528870820.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:20.467Z,1528870820.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:20.867Z,1528870820.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:21.267Z,1528870821.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:21.666Z,1528870821.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:22.068Z,1528870822.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:22.462Z,1528870822.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:22.866Z,1528870822.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:23.272Z,1528870823.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:23.666Z,1528870823.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:24.062Z,1528870824.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:24.466Z,1528870824.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:24.872Z,1528870824.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:25.266Z,1528870825.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:25.666Z,1528870825.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:26.062Z,1528870826.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:26.466Z,1528870826.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:26.867Z,1528870826.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:27.266Z,1528870827.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:27.662Z,1528870827.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:28.068Z,1528870828.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:28.465Z,1528870828.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:28.867Z,1528870828.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:29.266Z,1528870829.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:29.672Z,1528870829.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:30.068Z,1528870830.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:30.479Z,1528870830.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:30.826Z,1528870830.826 [NAL9602](INFO): NAL9602 initialized
2018-06-13T06:20:30.869Z,1528870830.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:31.271Z,1528870831.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:31.675Z,1528870831.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:32.075Z,1528870832.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:32.471Z,1528870832.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:32.869Z,1528870832.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:33.270Z,1528870833.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:33.668Z,1528870833.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:34.066Z,1528870834.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:34.474Z,1528870834.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:34.875Z,1528870834.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:35.275Z,1528870835.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:35.669Z,1528870835.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:36.072Z,1528870836.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:36.468Z,1528870836.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:36.875Z,1528870836.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:37.270Z,1528870837.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:37.680Z,1528870837.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:38.080Z,1528870838.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:38.480Z,1528870838.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:38.869Z,1528870838.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:39.274Z,1528870839.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:39.689Z,1528870839.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:40.070Z,1528870840.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:40.480Z,1528870840.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:40.897Z,1528870840.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:41.279Z,1528870841.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:41.674Z,1528870841.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:42.076Z,1528870842.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:42.473Z,1528870842.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:42.876Z,1528870842.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:43.270Z,1528870843.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:43.680Z,1528870843.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:44.088Z,1528870844.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:44.488Z,1528870844.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:44.869Z,1528870844.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:45.270Z,1528870845.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:45.684Z,1528870845.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:46.088Z,1528870846.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:46.481Z,1528870846.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:46.880Z,1528870846.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:47.281Z,1528870847.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:47.676Z,1528870847.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:48.075Z,1528870848.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:48.473Z,1528870848.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:48.888Z,1528870848.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:49.292Z,1528870849.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:49.688Z,1528870849.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:50.083Z,1528870850.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:50.487Z,1528870850.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:50.871Z,1528870850.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:51.284Z,1528870851.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:51.679Z,1528870851.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:52.081Z,1528870852.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:52.495Z,1528870852.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:52.886Z,1528870852.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:53.283Z,1528870853.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:53.684Z,1528870853.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:54.066Z,1528870854.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:54.482Z,1528870854.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:54.883Z,1528870854.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:55.296Z,1528870855.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:55.688Z,1528870855.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:56.085Z,1528870856.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:56.490Z,1528870856.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:56.896Z,1528870856.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:57.285Z,1528870857.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:57.671Z,1528870857.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:20:58.071Z,1528870858.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:01.200Z,1528870861.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:01.360Z,1528870861.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:01.752Z,1528870861.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:02.128Z,1528870862.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:02.554Z,1528870862.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:02.929Z,1528870862.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:03.359Z,1528870863.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:03.755Z,1528870863.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:04.159Z,1528870864.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:04.533Z,1528870864.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:04.936Z,1528870864.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:05.348Z,1528870865.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:05.744Z,1528870865.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:06.148Z,1528870866.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:06.539Z,1528870866.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:06.939Z,1528870866.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:07.340Z,1528870867.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:07.743Z,1528870867.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:08.144Z,1528870868.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:08.533Z,1528870868.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:08.936Z,1528870868.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:09.345Z,1528870869.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:09.742Z,1528870869.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:10.147Z,1528870870.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:10.544Z,1528870870.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:10.940Z,1528870870.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:11.337Z,1528870871.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:11.739Z,1528870871.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:12.131Z,1528870872.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:12.548Z,1528870872.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:12.952Z,1528870872.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:13.347Z,1528870873.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:13.734Z,1528870873.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:14.136Z,1528870874.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:14.535Z,1528870874.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:14.939Z,1528870874.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:15.344Z,1528870875.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:15.748Z,1528870875.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:16.146Z,1528870876.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:16.544Z,1528870876.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:16.935Z,1528870876.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:17.335Z,1528870877.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:17.741Z,1528870877.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:18.138Z,1528870878.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:18.552Z,1528870878.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:18.950Z,1528870878.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:19.340Z,1528870879.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:19.744Z,1528870879.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:20.143Z,1528870880.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:20.541Z,1528870880.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:20.950Z,1528870880.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:21.352Z,1528870881.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:21.756Z,1528870881.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:22.153Z,1528870882.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:22.564Z,1528870882.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:22.928Z,1528870882.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:23.332Z,1528870883.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:23.762Z,1528870883.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:24.157Z,1528870884.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:24.560Z,1528870884.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:24.967Z,1528870884.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:25.361Z,1528870885.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:25.764Z,1528870885.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:26.163Z,1528870886.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:26.531Z,1528870886.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:26.940Z,1528870886.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:27.363Z,1528870887.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:27.764Z,1528870887.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:28.160Z,1528870888.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:28.563Z,1528870888.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:28.956Z,1528870888.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:29.363Z,1528870889.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:29.734Z,1528870889.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:30.130Z,1528870890.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:30.562Z,1528870890.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:30.963Z,1528870890.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:31.360Z,1528870891.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:31.735Z,1528870891.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:32.165Z,1528870892.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:32.537Z,1528870892.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:32.940Z,1528870892.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:33.336Z,1528870893.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:33.767Z,1528870893.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:34.168Z,1528870894.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:34.568Z,1528870894.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:34.944Z,1528870894.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:35.362Z,1528870895.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:35.740Z,1528870895.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:36.140Z,1528870896.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:36.548Z,1528870896.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:36.971Z,1528870896.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:37.344Z,1528870897.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:37.744Z,1528870897.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:38.144Z,1528870898.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:38.565Z,1528870898.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:38.944Z,1528870898.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:39.341Z,1528870899.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:39.747Z,1528870899.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:40.163Z,1528870900.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:40.548Z,1528870900.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:40.940Z,1528870900.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:41.344Z,1528870901.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:41.766Z,1528870901.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:42.134Z,1528870902.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:42.545Z,1528870902.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:42.947Z,1528870902.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:43.368Z,1528870903.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:43.746Z,1528870903.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:44.141Z,1528870904.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:44.538Z,1528870904.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:44.970Z,1528870904.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:45.337Z,1528870905.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:45.750Z,1528870905.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:46.145Z,1528870906.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:46.571Z,1528870906.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:46.932Z,1528870906.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:47.339Z,1528870907.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:47.742Z,1528870907.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:48.173Z,1528870908.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:48.573Z,1528870908.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:48.952Z,1528870908.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:49.345Z,1528870909.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:49.752Z,1528870909.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:50.140Z,1528870910.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:50.535Z,1528870910.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:50.941Z,1528870910.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:51.335Z,1528870911.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:51.746Z,1528870911.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:52.153Z,1528870912.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:52.554Z,1528870912.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:52.952Z,1528870912.952 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:52.952Z,1528870912.952 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2018-06-13T06:21:52.952Z,1528870912.952 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:21:52.954Z,1528870912.954 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:52.954Z,1528870912.954 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59
2018-06-13T06:21:52.954Z,1528870912.954 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:21:52.956Z,1528870912.956 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:52.956Z,1528870912.956 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59
2018-06-13T06:21:52.956Z,1528870912.956 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:21:53.057Z,1528870913.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:21:53.058Z,1528870913.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:21:53.058Z,1528870913.058 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:21:53.414Z,1528870913.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:21:53.414Z,1528870913.414 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2018-06-13T06:21:53.414Z,1528870913.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:21:53.414Z,1528870913.414 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59
2018-06-13T06:21:53.415Z,1528870913.415 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:21:53.415Z,1528870913.415 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59
2018-06-13T06:21:53.738Z,1528870913.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:21:53.739Z,1528870913.739 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:21:53.740Z,1528870913.740 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:21:53.740Z,1528870913.740 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:21:53.741Z,1528870913.741 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:21:53.742Z,1528870913.742 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:21:53.743Z,1528870913.743 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:21:53.743Z,1528870913.743 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:21:53.744Z,1528870913.744 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:21:54.128Z,1528870914.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:21:54.141Z,1528870914.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:54.554Z,1528870914.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:21:54.555Z,1528870914.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:54.955Z,1528870914.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:21:54.956Z,1528870914.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:55.351Z,1528870915.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:21:55.357Z,1528870915.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:55.758Z,1528870915.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:21:55.759Z,1528870915.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:56.132Z,1528870916.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:21:56.132Z,1528870916.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:56.532Z,1528870916.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:21:56.533Z,1528870916.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:56.933Z,1528870916.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:21:56.934Z,1528870916.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:57.336Z,1528870917.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:21:57.338Z,1528870917.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:57.743Z,1528870917.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:21:57.743Z,1528870917.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:21:58.143Z,1528870918.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:21:58.144Z,1528870918.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:01.275Z,1528870921.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T06:22:01.275Z,1528870921.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:01.434Z,1528870921.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T06:22:01.435Z,1528870921.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:01.830Z,1528870921.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T06:22:01.831Z,1528870921.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:02.223Z,1528870922.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T06:22:02.224Z,1528870922.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:02.630Z,1528870922.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T06:22:02.631Z,1528870922.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:03.029Z,1528870923.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T06:22:03.030Z,1528870923.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:03.431Z,1528870923.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T06:22:03.432Z,1528870923.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:03.825Z,1528870923.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T06:22:03.826Z,1528870923.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:04.220Z,1528870924.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T06:22:04.221Z,1528870924.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:04.636Z,1528870924.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T06:22:04.641Z,1528870924.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:05.025Z,1528870925.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T06:22:05.026Z,1528870925.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:05.408Z,1528870925.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T06:22:05.417Z,1528870925.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:05.834Z,1528870925.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T06:22:05.835Z,1528870925.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:06.240Z,1528870926.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T06:22:06.241Z,1528870926.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:06.632Z,1528870926.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T06:22:06.633Z,1528870926.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:07.009Z,1528870927.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T06:22:07.010Z,1528870927.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:07.410Z,1528870927.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T06:22:07.411Z,1528870927.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:07.828Z,1528870927.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T06:22:07.833Z,1528870927.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:08.216Z,1528870928.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T06:22:08.217Z,1528870928.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:08.624Z,1528870928.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T06:22:08.641Z,1528870928.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:09.048Z,1528870929.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T06:22:09.053Z,1528870929.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:09.424Z,1528870929.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T06:22:09.425Z,1528870929.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:09.817Z,1528870929.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T06:22:09.818Z,1528870929.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:10.219Z,1528870930.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T06:22:10.220Z,1528870930.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:10.630Z,1528870930.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T06:22:10.631Z,1528870930.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:11.024Z,1528870931.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T06:22:11.029Z,1528870931.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:11.420Z,1528870931.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T06:22:11.421Z,1528870931.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:11.840Z,1528870931.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T06:22:11.841Z,1528870931.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:12.238Z,1528870932.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T06:22:12.239Z,1528870932.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:12.636Z,1528870932.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T06:22:12.637Z,1528870932.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:13.028Z,1528870933.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:13.418Z,1528870933.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:13.822Z,1528870933.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:14.238Z,1528870934.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:14.630Z,1528870934.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:15.033Z,1528870935.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:15.434Z,1528870935.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:15.817Z,1528870935.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:16.222Z,1528870936.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:16.631Z,1528870936.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:17.031Z,1528870937.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:17.419Z,1528870937.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:17.832Z,1528870937.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:18.231Z,1528870938.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:18.630Z,1528870938.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:19.025Z,1528870939.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:19.424Z,1528870939.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:19.824Z,1528870939.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:20.225Z,1528870940.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:20.626Z,1528870940.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:21.040Z,1528870941.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:21.431Z,1528870941.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:21.822Z,1528870941.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:22.230Z,1528870942.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:22.638Z,1528870942.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:23.024Z,1528870943.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:23.440Z,1528870943.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:23.858Z,1528870943.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:24.234Z,1528870944.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:24.628Z,1528870944.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:25.026Z,1528870945.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:25.429Z,1528870945.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:25.826Z,1528870945.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:26.224Z,1528870946.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:26.632Z,1528870946.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:27.036Z,1528870947.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:27.435Z,1528870947.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:27.828Z,1528870947.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:28.243Z,1528870948.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:28.632Z,1528870948.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:29.028Z,1528870949.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:29.424Z,1528870949.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:29.836Z,1528870949.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:30.234Z,1528870950.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:30.637Z,1528870950.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:31.021Z,1528870951.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:31.428Z,1528870951.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:31.831Z,1528870951.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:32.228Z,1528870952.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:32.629Z,1528870952.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:33.043Z,1528870953.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:33.431Z,1528870953.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:33.826Z,1528870953.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:34.229Z,1528870954.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:34.627Z,1528870954.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:35.015Z,1528870955.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:35.432Z,1528870955.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:35.834Z,1528870955.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:36.239Z,1528870956.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:36.632Z,1528870956.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:37.034Z,1528870957.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:37.429Z,1528870957.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:37.812Z,1528870957.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:38.220Z,1528870958.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:38.640Z,1528870958.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:39.040Z,1528870959.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:39.448Z,1528870959.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:39.812Z,1528870959.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:40.214Z,1528870960.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:40.613Z,1528870960.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:41.012Z,1528870961.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:41.412Z,1528870961.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:41.844Z,1528870961.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:42.241Z,1528870962.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:42.649Z,1528870962.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:43.012Z,1528870963.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:43.412Z,1528870963.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:43.820Z,1528870963.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:44.213Z,1528870964.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:44.645Z,1528870964.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:45.043Z,1528870965.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:45.450Z,1528870965.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:45.814Z,1528870965.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:46.220Z,1528870966.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:46.615Z,1528870966.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:47.021Z,1528870967.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:47.420Z,1528870967.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:47.823Z,1528870967.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:48.224Z,1528870968.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:48.628Z,1528870968.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:49.017Z,1528870969.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:49.415Z,1528870969.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:49.817Z,1528870969.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:50.250Z,1528870970.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:50.629Z,1528870970.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:51.028Z,1528870971.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:51.425Z,1528870971.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:51.818Z,1528870971.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:52.215Z,1528870972.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:52.623Z,1528870972.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:53.018Z,1528870973.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:53.427Z,1528870973.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:53.840Z,1528870973.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:54.230Z,1528870974.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:54.632Z,1528870974.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:55.019Z,1528870975.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:55.424Z,1528870975.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:55.818Z,1528870975.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:56.219Z,1528870976.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:56.636Z,1528870976.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:57.027Z,1528870977.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:57.430Z,1528870977.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:57.828Z,1528870977.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:58.235Z,1528870978.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:58.623Z,1528870978.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:59.028Z,1528870979.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:22:59.425Z,1528870979.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:02.540Z,1528870982.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:02.700Z,1528870982.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:03.092Z,1528870983.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:03.489Z,1528870983.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:03.885Z,1528870983.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:04.276Z,1528870984.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:04.687Z,1528870984.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:05.091Z,1528870985.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:05.486Z,1528870985.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:05.880Z,1528870985.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:06.280Z,1528870986.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:06.696Z,1528870986.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:07.087Z,1528870987.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:07.479Z,1528870987.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:07.892Z,1528870987.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:08.297Z,1528870988.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:08.700Z,1528870988.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:09.084Z,1528870989.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:09.482Z,1528870989.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:09.879Z,1528870989.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:10.284Z,1528870990.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:10.703Z,1528870990.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:11.092Z,1528870991.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:11.496Z,1528870991.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:11.879Z,1528870991.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:12.268Z,1528870992.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:12.693Z,1528870992.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:13.107Z,1528870993.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:13.464Z,1528870993.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:13.899Z,1528870993.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:14.299Z,1528870994.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:14.701Z,1528870994.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:15.068Z,1528870995.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:15.473Z,1528870995.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:15.880Z,1528870995.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:16.272Z,1528870996.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:16.698Z,1528870996.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:17.104Z,1528870997.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:17.481Z,1528870997.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:17.906Z,1528870997.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:18.276Z,1528870998.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:18.674Z,1528870998.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:19.098Z,1528870999.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:19.476Z,1528870999.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:19.881Z,1528870999.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:20.287Z,1528871000.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:20.685Z,1528871000.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:21.092Z,1528871001.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:21.480Z,1528871001.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:21.872Z,1528871001.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:22.278Z,1528871002.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:22.681Z,1528871002.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:23.082Z,1528871003.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:23.484Z,1528871003.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:23.883Z,1528871003.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:24.272Z,1528871004.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:24.672Z,1528871004.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:25.077Z,1528871005.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:25.483Z,1528871005.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:25.886Z,1528871005.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:26.286Z,1528871006.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:26.681Z,1528871006.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:27.072Z,1528871007.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:27.484Z,1528871007.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:27.878Z,1528871007.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:28.272Z,1528871008.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:28.691Z,1528871008.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:29.085Z,1528871009.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:29.481Z,1528871009.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:29.877Z,1528871009.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:30.272Z,1528871010.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:30.672Z,1528871010.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:31.076Z,1528871011.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:31.477Z,1528871011.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:31.883Z,1528871011.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:32.286Z,1528871012.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:32.684Z,1528871012.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:33.072Z,1528871013.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:33.476Z,1528871013.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:33.873Z,1528871013.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:34.272Z,1528871014.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:34.687Z,1528871014.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:35.081Z,1528871015.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:35.481Z,1528871015.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:35.878Z,1528871015.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:36.278Z,1528871016.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:36.679Z,1528871016.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:37.080Z,1528871017.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:37.484Z,1528871017.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:37.888Z,1528871017.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:38.284Z,1528871018.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:38.679Z,1528871018.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:39.078Z,1528871019.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:39.479Z,1528871019.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:39.878Z,1528871019.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:40.278Z,1528871020.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:40.689Z,1528871020.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:41.088Z,1528871021.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:41.482Z,1528871021.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:41.880Z,1528871021.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:42.277Z,1528871022.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:42.681Z,1528871022.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:43.084Z,1528871023.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:43.480Z,1528871023.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:43.886Z,1528871023.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:44.290Z,1528871024.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:44.683Z,1528871024.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:45.084Z,1528871025.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:45.465Z,1528871025.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:45.872Z,1528871025.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:46.299Z,1528871026.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:46.699Z,1528871026.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:47.099Z,1528871027.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:47.475Z,1528871027.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:47.872Z,1528871027.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:48.276Z,1528871028.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:48.772Z,1528871028.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:49.094Z,1528871029.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:49.476Z,1528871029.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:49.880Z,1528871029.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:50.280Z,1528871030.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:50.677Z,1528871030.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:51.074Z,1528871031.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:51.472Z,1528871031.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:51.872Z,1528871031.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:52.272Z,1528871032.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:52.678Z,1528871032.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:53.088Z,1528871033.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:53.481Z,1528871033.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:53.876Z,1528871033.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:54.276Z,1528871034.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:54.674Z,1528871034.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:55.074Z,1528871035.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:55.476Z,1528871035.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:55.883Z,1528871035.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:56.286Z,1528871036.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:56.686Z,1528871036.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:57.073Z,1528871037.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:57.481Z,1528871037.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:57.881Z,1528871037.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:23:58.274Z,1528871038.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:01.391Z,1528871041.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:01.580Z,1528871041.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:01.980Z,1528871041.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:02.371Z,1528871042.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:02.774Z,1528871042.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:03.164Z,1528871043.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:03.578Z,1528871043.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:03.976Z,1528871043.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:04.396Z,1528871044.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:04.800Z,1528871044.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:05.179Z,1528871045.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:05.573Z,1528871045.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:05.992Z,1528871045.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:06.352Z,1528871046.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:06.779Z,1528871046.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:07.183Z,1528871047.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:07.582Z,1528871047.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:07.956Z,1528871047.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:08.361Z,1528871048.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:08.760Z,1528871048.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:09.191Z,1528871049.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:09.556Z,1528871049.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:09.992Z,1528871049.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:10.369Z,1528871050.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:10.795Z,1528871050.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:11.157Z,1528871051.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:11.563Z,1528871051.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:11.967Z,1528871051.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:12.372Z,1528871052.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:12.764Z,1528871052.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:13.172Z,1528871053.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:13.568Z,1528871053.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:13.976Z,1528871053.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:14.364Z,1528871054.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:14.759Z,1528871054.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:15.165Z,1528871055.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:15.566Z,1528871055.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:15.967Z,1528871055.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:16.375Z,1528871056.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:16.773Z,1528871056.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:17.172Z,1528871057.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:17.559Z,1528871057.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:17.960Z,1528871057.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:18.360Z,1528871058.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:18.767Z,1528871058.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:19.168Z,1528871059.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:19.567Z,1528871059.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:19.975Z,1528871059.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:20.374Z,1528871060.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:20.760Z,1528871060.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:21.161Z,1528871061.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:21.569Z,1528871061.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:21.965Z,1528871061.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:22.373Z,1528871062.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:22.778Z,1528871062.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:23.171Z,1528871063.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:23.560Z,1528871063.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:23.964Z,1528871063.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:24.368Z,1528871064.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:24.774Z,1528871064.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:25.174Z,1528871065.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:25.565Z,1528871065.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:25.960Z,1528871065.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:26.384Z,1528871066.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:26.766Z,1528871066.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:27.170Z,1528871067.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:27.561Z,1528871067.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:27.979Z,1528871067.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:28.387Z,1528871068.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:28.767Z,1528871068.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:29.164Z,1528871069.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:29.560Z,1528871069.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:29.970Z,1528871069.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:30.356Z,1528871070.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:30.767Z,1528871070.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:31.172Z,1528871071.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:31.572Z,1528871071.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:31.962Z,1528871071.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:32.360Z,1528871072.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:32.756Z,1528871072.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:33.161Z,1528871073.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:33.564Z,1528871073.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:33.972Z,1528871073.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:34.372Z,1528871074.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:34.774Z,1528871074.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:35.164Z,1528871075.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:35.564Z,1528871075.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:35.972Z,1528871075.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:36.372Z,1528871076.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:36.771Z,1528871076.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:37.174Z,1528871077.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:37.570Z,1528871077.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:37.968Z,1528871077.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:38.348Z,1528871078.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:38.775Z,1528871078.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:39.169Z,1528871079.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:39.548Z,1528871079.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:39.984Z,1528871079.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:40.379Z,1528871080.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:40.783Z,1528871080.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:41.149Z,1528871081.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:41.552Z,1528871081.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:41.983Z,1528871081.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:42.353Z,1528871082.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:42.782Z,1528871082.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:43.181Z,1528871083.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:43.578Z,1528871083.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:43.956Z,1528871083.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:44.355Z,1528871084.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:44.751Z,1528871084.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:45.161Z,1528871085.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:45.556Z,1528871085.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:45.987Z,1528871085.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:46.385Z,1528871086.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:46.792Z,1528871086.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:47.155Z,1528871087.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:47.556Z,1528871087.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:47.955Z,1528871087.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:48.354Z,1528871088.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:48.783Z,1528871088.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:49.166Z,1528871089.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:49.564Z,1528871089.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:49.960Z,1528871089.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:50.360Z,1528871090.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:50.757Z,1528871090.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:51.160Z,1528871091.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:51.557Z,1528871091.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:51.963Z,1528871091.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:52.366Z,1528871092.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:52.768Z,1528871092.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:53.159Z,1528871093.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:53.557Z,1528871093.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:53.958Z,1528871093.958 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:53.958Z,1528871093.958 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2018-06-13T06:24:53.959Z,1528871093.959 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:24:53.960Z,1528871093.960 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:53.960Z,1528871093.960 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60
2018-06-13T06:24:53.960Z,1528871093.960 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:24:53.962Z,1528871093.962 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:53.962Z,1528871093.962 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60
2018-06-13T06:24:53.962Z,1528871093.962 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:24:54.061Z,1528871094.061 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:24:54.061Z,1528871094.061 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:24:54.061Z,1528871094.061 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:24:54.430Z,1528871094.430 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:24:54.430Z,1528871094.430 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2018-06-13T06:24:54.431Z,1528871094.431 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:24:54.431Z,1528871094.431 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60
2018-06-13T06:24:54.432Z,1528871094.432 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:24:54.432Z,1528871094.432 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60
2018-06-13T06:24:54.767Z,1528871094.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:24:54.767Z,1528871094.767 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:24:54.768Z,1528871094.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:24:54.768Z,1528871094.768 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:24:54.768Z,1528871094.768 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:24:54.769Z,1528871094.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:24:54.769Z,1528871094.769 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:24:54.770Z,1528871094.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:24:54.770Z,1528871094.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:24:55.175Z,1528871095.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:24:55.176Z,1528871095.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:55.568Z,1528871095.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:24:55.569Z,1528871095.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:55.959Z,1528871095.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:24:55.960Z,1528871095.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:56.364Z,1528871096.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:24:56.365Z,1528871096.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:56.758Z,1528871096.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:24:56.759Z,1528871096.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:57.168Z,1528871097.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:24:57.173Z,1528871097.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:57.558Z,1528871097.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:24:57.559Z,1528871097.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:57.972Z,1528871097.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:24:57.973Z,1528871097.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:57.976Z,1528871097.976 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T06:24:57.976Z,1528871097.976 [Default:CheckIn:C.Wait] Stopped
2018-06-13T06:24:57.976Z,1528871097.976 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T06:24:57.977Z,1528871097.977 [Default:CheckIn:D] Running Loop=1
2018-06-13T06:24:58.376Z,1528871098.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:24:58.378Z,1528871098.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:24:58.381Z,1528871098.381 [Default:CheckIn:D] Stopped
2018-06-13T06:24:58.381Z,1528871098.381 [Default:CheckIn:E] Running Loop=1
2018-06-13T06:25:01.488Z,1528871101.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T06:25:01.489Z,1528871101.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:01.492Z,1528871101.492 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 177.748942 min 
2018-06-13T06:25:01.492Z,1528871101.492 [Default:CheckIn:E] Stopped
2018-06-13T06:25:01.492Z,1528871101.492 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T06:25:01.493Z,1528871101.493 [Default:CheckIn] Stopped
2018-06-13T06:25:01.493Z,1528871101.493 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T06:25:01.493Z,1528871101.493 [Default:CheckIn](INFO): Running loop #18
2018-06-13T06:25:01.493Z,1528871101.493 [Default:CheckIn] Running Loop=18
2018-06-13T06:25:01.493Z,1528871101.493 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T06:25:01.493Z,1528871101.493 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T06:25:01.672Z,1528871101.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T06:25:01.677Z,1528871101.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:02.073Z,1528871102.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T06:25:02.074Z,1528871102.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:02.453Z,1528871102.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T06:25:02.454Z,1528871102.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:02.874Z,1528871102.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T06:25:02.875Z,1528871102.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:03.256Z,1528871103.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T06:25:03.257Z,1528871103.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:03.677Z,1528871103.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T06:25:03.678Z,1528871103.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:04.041Z,1528871104.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T06:25:04.042Z,1528871104.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:04.450Z,1528871104.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T06:25:04.451Z,1528871104.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:04.847Z,1528871104.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T06:25:04.848Z,1528871104.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:05.279Z,1528871105.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T06:25:05.280Z,1528871105.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:05.646Z,1528871105.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T06:25:05.647Z,1528871105.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:06.059Z,1528871106.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T06:25:06.060Z,1528871106.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:06.458Z,1528871106.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T06:25:06.459Z,1528871106.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:06.880Z,1528871106.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T06:25:06.881Z,1528871106.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:07.247Z,1528871107.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T06:25:07.248Z,1528871107.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:07.651Z,1528871107.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T06:25:07.652Z,1528871107.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:08.052Z,1528871108.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T06:25:08.053Z,1528871108.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:08.462Z,1528871108.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T06:25:08.464Z,1528871108.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:08.861Z,1528871108.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T06:25:08.862Z,1528871108.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:09.260Z,1528871109.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T06:25:09.261Z,1528871109.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:09.658Z,1528871109.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T06:25:09.659Z,1528871109.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:10.081Z,1528871110.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T06:25:10.082Z,1528871110.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:10.442Z,1528871110.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T06:25:10.443Z,1528871110.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:10.850Z,1528871110.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T06:25:10.852Z,1528871110.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:11.252Z,1528871111.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T06:25:11.253Z,1528871111.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:11.656Z,1528871111.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T06:25:11.657Z,1528871111.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:12.064Z,1528871112.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T06:25:12.088Z,1528871112.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:12.460Z,1528871112.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T06:25:12.461Z,1528871112.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:12.856Z,1528871112.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T06:25:12.856Z,1528871112.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:13.249Z,1528871113.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T06:25:13.250Z,1528871113.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:13.646Z,1528871113.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T06:25:13.647Z,1528871113.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:14.050Z,1528871114.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:14.452Z,1528871114.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:14.856Z,1528871114.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:15.255Z,1528871115.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:15.659Z,1528871115.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:16.052Z,1528871116.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:16.446Z,1528871116.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:16.851Z,1528871116.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:17.247Z,1528871117.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:17.650Z,1528871117.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:18.055Z,1528871118.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:18.455Z,1528871118.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:18.856Z,1528871118.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:19.247Z,1528871119.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:19.647Z,1528871119.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:20.048Z,1528871120.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:20.450Z,1528871120.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:20.858Z,1528871120.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:21.255Z,1528871121.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:21.659Z,1528871121.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:22.047Z,1528871122.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:22.447Z,1528871122.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:22.851Z,1528871122.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:23.248Z,1528871123.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:23.647Z,1528871123.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:24.068Z,1528871124.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:24.456Z,1528871124.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:24.856Z,1528871124.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:25.248Z,1528871125.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:25.655Z,1528871125.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:26.049Z,1528871126.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:26.452Z,1528871126.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:26.857Z,1528871126.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:27.257Z,1528871127.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:27.660Z,1528871127.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:28.043Z,1528871128.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:28.458Z,1528871128.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:28.848Z,1528871128.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:29.249Z,1528871129.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:29.648Z,1528871129.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:30.061Z,1528871130.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:30.464Z,1528871130.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:30.857Z,1528871130.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:31.252Z,1528871131.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:31.644Z,1528871131.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:32.054Z,1528871132.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:32.462Z,1528871132.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:32.859Z,1528871132.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:33.262Z,1528871133.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:33.663Z,1528871133.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:34.036Z,1528871134.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:34.460Z,1528871134.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:34.841Z,1528871134.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:35.268Z,1528871135.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:35.643Z,1528871135.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:36.075Z,1528871136.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:36.455Z,1528871136.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:36.851Z,1528871136.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:37.248Z,1528871137.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:37.645Z,1528871137.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:38.052Z,1528871138.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:38.447Z,1528871138.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:38.851Z,1528871138.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:39.255Z,1528871139.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:39.655Z,1528871139.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:40.045Z,1528871140.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:40.447Z,1528871140.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:40.847Z,1528871140.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:41.248Z,1528871141.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:41.647Z,1528871141.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:42.056Z,1528871142.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:42.456Z,1528871142.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:42.856Z,1528871142.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:43.247Z,1528871143.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:43.655Z,1528871143.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:44.047Z,1528871144.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:44.447Z,1528871144.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:44.853Z,1528871144.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:45.255Z,1528871145.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:45.655Z,1528871145.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:46.044Z,1528871146.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:46.446Z,1528871146.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:46.848Z,1528871146.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:47.243Z,1528871147.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:47.642Z,1528871147.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:48.055Z,1528871148.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:48.456Z,1528871148.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:48.857Z,1528871148.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:49.248Z,1528871149.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:49.647Z,1528871149.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:50.047Z,1528871150.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:50.447Z,1528871150.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:50.856Z,1528871150.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:51.255Z,1528871151.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:51.663Z,1528871151.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:52.046Z,1528871152.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:52.446Z,1528871152.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:52.847Z,1528871152.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:53.251Z,1528871153.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:53.646Z,1528871153.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:54.060Z,1528871154.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:54.455Z,1528871154.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:54.855Z,1528871154.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:55.247Z,1528871155.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:55.646Z,1528871155.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:56.048Z,1528871156.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:56.452Z,1528871156.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:56.855Z,1528871156.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:57.260Z,1528871157.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:57.656Z,1528871157.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:58.046Z,1528871158.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:25:58.451Z,1528871158.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:01.563Z,1528871161.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:01.755Z,1528871161.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:02.146Z,1528871162.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:02.552Z,1528871162.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:02.944Z,1528871162.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:03.316Z,1528871163.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:03.721Z,1528871163.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:04.124Z,1528871164.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:04.520Z,1528871164.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:04.953Z,1528871164.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:05.327Z,1528871165.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:05.752Z,1528871165.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:06.123Z,1528871166.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:06.522Z,1528871166.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:06.922Z,1528871166.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:07.342Z,1528871167.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:07.724Z,1528871167.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:08.132Z,1528871168.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:08.531Z,1528871168.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:08.938Z,1528871168.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:09.332Z,1528871169.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:09.724Z,1528871169.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:10.125Z,1528871170.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:10.525Z,1528871170.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:10.938Z,1528871170.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:11.346Z,1528871171.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:11.734Z,1528871171.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:12.131Z,1528871172.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:12.526Z,1528871172.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:12.931Z,1528871172.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:13.332Z,1528871173.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:13.712Z,1528871173.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:14.144Z,1528871174.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:14.548Z,1528871174.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:14.953Z,1528871174.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:15.317Z,1528871175.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:15.722Z,1528871175.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:16.118Z,1528871176.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:16.524Z,1528871176.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:16.957Z,1528871176.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:17.331Z,1528871177.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:17.728Z,1528871177.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:18.125Z,1528871178.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:18.520Z,1528871178.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:18.926Z,1528871178.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:19.331Z,1528871179.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:19.722Z,1528871179.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:20.132Z,1528871180.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:20.537Z,1528871180.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:20.930Z,1528871180.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:21.324Z,1528871181.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:21.724Z,1528871181.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:22.129Z,1528871182.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:22.516Z,1528871182.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:22.942Z,1528871182.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:23.338Z,1528871183.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:23.742Z,1528871183.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:24.117Z,1528871184.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:24.516Z,1528871184.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:24.920Z,1528871184.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:25.320Z,1528871185.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:25.716Z,1528871185.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:26.147Z,1528871186.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:26.551Z,1528871186.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:26.927Z,1528871186.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:27.321Z,1528871187.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:27.724Z,1528871187.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:28.119Z,1528871188.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:28.522Z,1528871188.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:28.931Z,1528871188.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:29.331Z,1528871189.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:29.728Z,1528871189.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:30.124Z,1528871190.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:30.524Z,1528871190.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:30.923Z,1528871190.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:31.324Z,1528871191.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:31.720Z,1528871191.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:32.128Z,1528871192.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:32.532Z,1528871192.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:32.932Z,1528871192.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:33.323Z,1528871193.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:33.723Z,1528871193.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:34.127Z,1528871194.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:34.524Z,1528871194.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:34.932Z,1528871194.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:35.336Z,1528871195.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:35.731Z,1528871195.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:36.124Z,1528871196.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:36.520Z,1528871196.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:36.923Z,1528871196.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:37.329Z,1528871197.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:37.720Z,1528871197.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:38.133Z,1528871198.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:38.536Z,1528871198.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:38.932Z,1528871198.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:39.326Z,1528871199.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:39.728Z,1528871199.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:40.121Z,1528871200.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:40.522Z,1528871200.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:40.937Z,1528871200.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:41.340Z,1528871201.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:41.736Z,1528871201.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:42.125Z,1528871202.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:42.520Z,1528871202.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:42.920Z,1528871202.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:43.325Z,1528871203.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:43.727Z,1528871203.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:44.133Z,1528871204.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:44.537Z,1528871204.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:44.929Z,1528871204.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:45.324Z,1528871205.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:45.728Z,1528871205.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:46.125Z,1528871206.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:46.525Z,1528871206.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:46.938Z,1528871206.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:47.333Z,1528871207.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:47.736Z,1528871207.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:48.125Z,1528871208.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:48.528Z,1528871208.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:48.928Z,1528871208.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:49.331Z,1528871209.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:49.720Z,1528871209.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:50.135Z,1528871210.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:50.546Z,1528871210.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:50.931Z,1528871210.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:51.336Z,1528871211.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:51.732Z,1528871211.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:52.126Z,1528871212.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:52.526Z,1528871212.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:52.939Z,1528871212.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:53.332Z,1528871213.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:53.736Z,1528871213.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:54.132Z,1528871214.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:54.524Z,1528871214.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:54.938Z,1528871214.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:55.337Z,1528871215.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:55.733Z,1528871215.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:56.134Z,1528871216.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:56.537Z,1528871216.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:56.938Z,1528871216.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:57.339Z,1528871217.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:57.741Z,1528871217.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:58.130Z,1528871218.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:26:58.538Z,1528871218.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:01.652Z,1528871221.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:01.823Z,1528871221.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:02.205Z,1528871222.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:02.600Z,1528871222.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:02.999Z,1528871222.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:03.398Z,1528871223.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:03.798Z,1528871223.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:04.203Z,1528871224.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:04.607Z,1528871224.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:04.999Z,1528871224.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:05.392Z,1528871225.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:05.800Z,1528871225.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:06.177Z,1528871226.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:06.577Z,1528871226.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:07.012Z,1528871227.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:07.410Z,1528871227.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:07.807Z,1528871227.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:08.188Z,1528871228.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:08.582Z,1528871228.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:08.983Z,1528871228.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:09.388Z,1528871229.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:09.786Z,1528871229.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:10.191Z,1528871230.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:10.595Z,1528871230.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:10.995Z,1528871230.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:11.386Z,1528871231.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:11.785Z,1528871231.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:12.187Z,1528871232.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:12.586Z,1528871232.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:12.991Z,1528871232.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:13.395Z,1528871233.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:13.791Z,1528871233.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:14.186Z,1528871234.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:14.583Z,1528871234.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:14.995Z,1528871234.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:15.389Z,1528871235.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:15.787Z,1528871235.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:16.195Z,1528871236.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:16.595Z,1528871236.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:17.000Z,1528871237.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:17.386Z,1528871237.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:17.787Z,1528871237.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:18.192Z,1528871238.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:18.586Z,1528871238.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:18.992Z,1528871238.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:19.400Z,1528871239.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:19.792Z,1528871239.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:20.188Z,1528871240.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:20.589Z,1528871240.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:20.987Z,1528871240.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:21.388Z,1528871241.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:21.787Z,1528871241.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:22.192Z,1528871242.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:22.595Z,1528871242.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:22.995Z,1528871242.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:23.386Z,1528871243.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:23.786Z,1528871243.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:24.187Z,1528871244.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:24.586Z,1528871244.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:24.992Z,1528871244.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:25.395Z,1528871245.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:25.792Z,1528871245.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:26.187Z,1528871246.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:26.587Z,1528871246.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:26.992Z,1528871246.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:27.387Z,1528871247.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:27.799Z,1528871247.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:28.201Z,1528871248.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:28.601Z,1528871248.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:28.996Z,1528871248.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:29.386Z,1528871249.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:29.805Z,1528871249.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:30.189Z,1528871250.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:30.587Z,1528871250.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:31.005Z,1528871251.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:31.402Z,1528871251.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:31.799Z,1528871251.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:32.196Z,1528871252.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:32.600Z,1528871252.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:33.005Z,1528871253.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:33.405Z,1528871253.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:33.805Z,1528871253.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:34.194Z,1528871254.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:34.592Z,1528871254.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:34.991Z,1528871254.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:35.395Z,1528871255.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:35.789Z,1528871255.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:36.203Z,1528871256.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:36.605Z,1528871256.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:36.998Z,1528871256.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:37.393Z,1528871257.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:37.794Z,1528871257.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:38.193Z,1528871258.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:38.591Z,1528871258.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:38.997Z,1528871258.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:39.404Z,1528871259.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:39.803Z,1528871259.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:40.189Z,1528871260.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:40.588Z,1528871260.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:41.007Z,1528871261.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:41.403Z,1528871261.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:41.805Z,1528871261.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:42.195Z,1528871262.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:42.604Z,1528871262.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:43.012Z,1528871263.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:43.422Z,1528871263.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:43.803Z,1528871263.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:44.188Z,1528871264.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:44.584Z,1528871264.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:45.013Z,1528871265.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:45.415Z,1528871265.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:45.816Z,1528871265.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:46.183Z,1528871266.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:46.583Z,1528871266.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:46.995Z,1528871266.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:47.395Z,1528871267.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:47.791Z,1528871267.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:48.198Z,1528871268.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:48.586Z,1528871268.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:48.995Z,1528871268.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:49.395Z,1528871269.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:49.792Z,1528871269.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:50.187Z,1528871270.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:50.600Z,1528871270.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:50.994Z,1528871270.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:51.401Z,1528871271.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:51.821Z,1528871271.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:52.185Z,1528871272.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:52.586Z,1528871272.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:52.998Z,1528871272.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:53.397Z,1528871273.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:53.794Z,1528871273.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:54.188Z,1528871274.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:54.584Z,1528871274.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:54.998Z,1528871274.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:54.998Z,1528871274.998 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2018-06-13T06:27:54.998Z,1528871274.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:27:55.000Z,1528871275.000 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:55.000Z,1528871275.000 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61
2018-06-13T06:27:55.000Z,1528871275.000 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:27:55.002Z,1528871275.002 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:55.002Z,1528871275.002 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61
2018-06-13T06:27:55.002Z,1528871275.002 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:27:55.081Z,1528871275.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:27:55.081Z,1528871275.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:27:55.082Z,1528871275.082 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:27:55.481Z,1528871275.481 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:27:55.481Z,1528871275.481 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2018-06-13T06:27:55.482Z,1528871275.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:27:55.482Z,1528871275.482 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61
2018-06-13T06:27:55.482Z,1528871275.482 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:27:55.482Z,1528871275.482 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61
2018-06-13T06:27:55.794Z,1528871275.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:27:55.794Z,1528871275.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:27:55.795Z,1528871275.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:27:55.795Z,1528871275.795 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:27:55.796Z,1528871275.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:27:55.796Z,1528871275.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:27:55.796Z,1528871275.796 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:27:55.797Z,1528871275.797 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:27:55.798Z,1528871275.798 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:27:56.206Z,1528871276.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:27:56.207Z,1528871276.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:56.580Z,1528871276.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:27:56.598Z,1528871276.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:57.007Z,1528871277.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:27:57.008Z,1528871277.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:57.403Z,1528871277.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:27:57.404Z,1528871277.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:57.807Z,1528871277.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:27:57.808Z,1528871277.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:58.209Z,1528871278.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:27:58.210Z,1528871278.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:27:58.583Z,1528871278.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:27:58.584Z,1528871278.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:01.717Z,1528871281.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T06:28:01.718Z,1528871281.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:01.892Z,1528871281.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T06:28:01.908Z,1528871281.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:02.268Z,1528871282.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T06:28:02.270Z,1528871282.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:02.668Z,1528871282.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T06:28:02.669Z,1528871282.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:03.066Z,1528871283.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T06:28:03.067Z,1528871283.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:03.472Z,1528871283.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T06:28:03.473Z,1528871283.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:03.877Z,1528871283.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T06:28:03.878Z,1528871283.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:04.323Z,1528871284.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T06:28:04.324Z,1528871284.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:04.688Z,1528871284.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T06:28:04.689Z,1528871284.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:05.074Z,1528871285.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T06:28:05.075Z,1528871285.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:05.464Z,1528871285.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T06:28:05.465Z,1528871285.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:05.872Z,1528871285.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T06:28:05.877Z,1528871285.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:06.275Z,1528871286.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T06:28:06.276Z,1528871286.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:06.652Z,1528871286.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T06:28:06.669Z,1528871286.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:07.074Z,1528871287.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T06:28:07.075Z,1528871287.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:07.481Z,1528871287.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T06:28:07.482Z,1528871287.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:07.882Z,1528871287.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T06:28:07.883Z,1528871287.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:08.260Z,1528871288.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T06:28:08.277Z,1528871288.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:08.657Z,1528871288.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T06:28:08.658Z,1528871288.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:09.051Z,1528871289.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T06:28:09.052Z,1528871289.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:09.456Z,1528871289.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T06:28:09.457Z,1528871289.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:09.860Z,1528871289.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T06:28:09.861Z,1528871289.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:10.267Z,1528871290.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T06:28:10.267Z,1528871290.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:10.667Z,1528871290.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T06:28:10.668Z,1528871290.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:11.068Z,1528871291.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T06:28:11.070Z,1528871291.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:11.456Z,1528871291.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T06:28:11.458Z,1528871291.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:11.858Z,1528871291.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T06:28:11.859Z,1528871291.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:12.268Z,1528871292.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T06:28:12.269Z,1528871292.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:12.657Z,1528871292.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T06:28:12.658Z,1528871292.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:13.068Z,1528871293.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T06:28:13.069Z,1528871293.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:13.471Z,1528871293.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T06:28:13.472Z,1528871293.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:13.865Z,1528871293.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T06:28:13.866Z,1528871293.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:14.260Z,1528871294.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T06:28:14.261Z,1528871294.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:14.660Z,1528871294.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T06:28:14.660Z,1528871294.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:15.056Z,1528871295.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:15.470Z,1528871295.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:15.863Z,1528871295.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:16.270Z,1528871296.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:16.672Z,1528871296.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:17.072Z,1528871297.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:17.468Z,1528871297.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:17.860Z,1528871297.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:18.262Z,1528871298.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:18.667Z,1528871298.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:19.073Z,1528871299.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:19.474Z,1528871299.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:19.870Z,1528871299.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:20.276Z,1528871300.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:20.661Z,1528871300.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:21.067Z,1528871301.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:21.474Z,1528871301.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:21.875Z,1528871301.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:22.263Z,1528871302.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:22.668Z,1528871302.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:23.075Z,1528871303.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:23.470Z,1528871303.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:23.871Z,1528871303.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:24.266Z,1528871304.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:24.664Z,1528871304.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:25.070Z,1528871305.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:25.474Z,1528871305.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:25.866Z,1528871305.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:26.267Z,1528871306.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:26.677Z,1528871306.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:27.070Z,1528871307.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:27.473Z,1528871307.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:27.874Z,1528871307.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:28.260Z,1528871308.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:28.657Z,1528871308.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:29.076Z,1528871309.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:29.470Z,1528871309.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:29.869Z,1528871309.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:30.269Z,1528871310.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:30.656Z,1528871310.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:31.071Z,1528871311.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:31.475Z,1528871311.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:31.871Z,1528871311.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:32.268Z,1528871312.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:32.675Z,1528871312.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:33.065Z,1528871313.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:33.477Z,1528871313.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:33.874Z,1528871313.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:34.264Z,1528871314.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:34.660Z,1528871314.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:35.074Z,1528871315.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:35.469Z,1528871315.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:35.875Z,1528871315.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:36.264Z,1528871316.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:36.661Z,1528871316.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:37.069Z,1528871317.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:37.474Z,1528871317.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:37.865Z,1528871317.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:38.261Z,1528871318.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:38.665Z,1528871318.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:39.070Z,1528871319.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:39.473Z,1528871319.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:39.874Z,1528871319.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:40.267Z,1528871320.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:40.661Z,1528871320.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:41.075Z,1528871321.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:41.474Z,1528871321.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:41.873Z,1528871321.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:42.274Z,1528871322.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:42.671Z,1528871322.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:43.070Z,1528871323.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:43.478Z,1528871323.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:43.868Z,1528871323.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:44.266Z,1528871324.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:44.668Z,1528871324.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:45.070Z,1528871325.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:45.474Z,1528871325.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:45.874Z,1528871325.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:46.268Z,1528871326.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:46.675Z,1528871326.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:47.084Z,1528871327.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:47.471Z,1528871327.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:47.888Z,1528871327.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:48.258Z,1528871328.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:48.654Z,1528871328.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:49.067Z,1528871329.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:49.487Z,1528871329.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:49.863Z,1528871329.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:50.263Z,1528871330.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:50.659Z,1528871330.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:51.063Z,1528871331.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:51.467Z,1528871331.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:51.867Z,1528871331.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:52.257Z,1528871332.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:52.658Z,1528871332.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:53.067Z,1528871333.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:53.463Z,1528871333.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:53.863Z,1528871333.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:54.268Z,1528871334.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:54.655Z,1528871334.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:55.063Z,1528871335.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:55.467Z,1528871335.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:55.861Z,1528871335.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:56.261Z,1528871336.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:56.660Z,1528871336.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:57.060Z,1528871337.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:57.466Z,1528871337.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:57.895Z,1528871337.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:58.259Z,1528871338.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:28:58.664Z,1528871338.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:01.769Z,1528871341.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:01.972Z,1528871341.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:02.364Z,1528871342.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:02.758Z,1528871342.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:03.150Z,1528871343.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:03.545Z,1528871343.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:03.948Z,1528871343.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:04.350Z,1528871344.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:04.755Z,1528871344.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:05.155Z,1528871345.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:05.549Z,1528871345.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:05.946Z,1528871345.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:06.351Z,1528871346.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:06.729Z,1528871346.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:07.164Z,1528871347.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:07.572Z,1528871347.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:07.959Z,1528871347.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:08.333Z,1528871348.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:08.737Z,1528871348.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:09.132Z,1528871349.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:09.541Z,1528871349.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:09.936Z,1528871349.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:10.343Z,1528871350.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:10.766Z,1528871350.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:11.172Z,1528871351.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:11.536Z,1528871351.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:11.936Z,1528871351.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:12.336Z,1528871352.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:12.740Z,1528871352.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:13.163Z,1528871353.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:13.573Z,1528871353.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:13.940Z,1528871353.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:14.344Z,1528871354.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:14.736Z,1528871354.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:15.143Z,1528871355.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:15.568Z,1528871355.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:15.974Z,1528871355.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:16.336Z,1528871356.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:16.739Z,1528871356.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:17.143Z,1528871357.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:17.543Z,1528871357.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:17.943Z,1528871357.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:18.339Z,1528871358.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:18.736Z,1528871358.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:19.143Z,1528871359.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:19.547Z,1528871359.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:19.944Z,1528871359.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:20.343Z,1528871360.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:20.737Z,1528871360.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:21.143Z,1528871361.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:21.547Z,1528871361.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:21.948Z,1528871361.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:22.338Z,1528871362.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:22.737Z,1528871362.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:23.147Z,1528871363.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:23.544Z,1528871363.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:23.943Z,1528871363.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:24.339Z,1528871364.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:24.738Z,1528871364.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:25.143Z,1528871365.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:25.547Z,1528871365.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:25.943Z,1528871365.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:26.339Z,1528871366.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:26.738Z,1528871366.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:27.147Z,1528871367.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:27.547Z,1528871367.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:27.946Z,1528871367.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:28.339Z,1528871368.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:28.736Z,1528871368.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:29.143Z,1528871369.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:29.547Z,1528871369.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:29.943Z,1528871369.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:30.342Z,1528871370.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:30.738Z,1528871370.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:31.143Z,1528871371.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:31.546Z,1528871371.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:31.944Z,1528871371.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:32.339Z,1528871372.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:32.741Z,1528871372.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:33.144Z,1528871373.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:33.547Z,1528871373.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:33.963Z,1528871373.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:34.340Z,1528871374.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:34.738Z,1528871374.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:35.148Z,1528871375.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:35.547Z,1528871375.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:35.948Z,1528871375.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:36.352Z,1528871376.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:36.738Z,1528871376.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:37.150Z,1528871377.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:37.552Z,1528871377.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:37.952Z,1528871377.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:38.339Z,1528871378.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:38.739Z,1528871378.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:39.152Z,1528871379.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:39.552Z,1528871379.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:39.956Z,1528871379.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:40.339Z,1528871380.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:40.740Z,1528871380.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:41.148Z,1528871381.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:41.552Z,1528871381.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:41.949Z,1528871381.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:42.348Z,1528871382.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:42.740Z,1528871382.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:43.148Z,1528871383.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:43.549Z,1528871383.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:43.948Z,1528871383.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:44.350Z,1528871384.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:44.752Z,1528871384.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:45.149Z,1528871385.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:45.552Z,1528871385.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:45.963Z,1528871385.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:46.340Z,1528871386.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:46.742Z,1528871386.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:47.156Z,1528871387.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:47.550Z,1528871387.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:47.948Z,1528871387.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:48.358Z,1528871388.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:48.745Z,1528871388.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:49.151Z,1528871389.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:49.555Z,1528871389.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:49.947Z,1528871389.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:50.340Z,1528871390.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:50.750Z,1528871390.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:51.131Z,1528871391.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:51.556Z,1528871391.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:51.956Z,1528871391.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:52.357Z,1528871392.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:52.756Z,1528871392.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:53.138Z,1528871393.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:53.537Z,1528871393.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:53.940Z,1528871393.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:54.367Z,1528871394.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:54.743Z,1528871394.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:55.163Z,1528871395.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:55.536Z,1528871395.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:55.936Z,1528871395.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:56.337Z,1528871396.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:56.764Z,1528871396.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:57.136Z,1528871397.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:57.568Z,1528871397.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:57.948Z,1528871397.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:58.352Z,1528871398.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:58.742Z,1528871398.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:59.143Z,1528871399.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:59.542Z,1528871399.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:29:59.938Z,1528871399.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:03.077Z,1528871403.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:03.080Z,1528871403.080 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T06:25:01.5Z
2018-06-13T06:30:03.080Z,1528871403.080 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T06:30:03.081Z,1528871403.081 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T06:30:03.252Z,1528871403.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:04.381Z,1528871404.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:04.540Z,1528871404.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:04.948Z,1528871404.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:05.345Z,1528871405.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:05.736Z,1528871405.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:06.148Z,1528871406.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:06.543Z,1528871406.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:09.652Z,1528871409.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:09.746Z,1528871409.746 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0072.lzma
2018-06-13T06:30:09.820Z,1528871409.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:10.206Z,1528871410.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:10.546Z,1528871410.546 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0072.lzma.bak
2018-06-13T06:30:10.546Z,1528871410.546 [DataOverHttps](INFO): SBD MOMSN=8328737
2018-06-13T06:30:10.611Z,1528871410.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:12.606Z,1528871412.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:12.796Z,1528871412.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:13.172Z,1528871413.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:16.306Z,1528871416.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:16.458Z,1528871416.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:16.849Z,1528871416.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:17.261Z,1528871417.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:17.649Z,1528871417.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:18.057Z,1528871418.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:18.468Z,1528871418.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:18.858Z,1528871418.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:19.258Z,1528871419.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:22.361Z,1528871422.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:22.461Z,1528871422.461 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0073.lzma
2018-06-13T06:30:22.518Z,1528871422.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:22.924Z,1528871422.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:23.262Z,1528871423.262 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0073.lzma.bak
2018-06-13T06:30:23.262Z,1528871423.262 [DataOverHttps](INFO): SBD MOMSN=8328739
2018-06-13T06:30:23.351Z,1528871423.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:25.209Z,1528871425.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:25.212Z,1528871425.212 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T06:30:25.212Z,1528871425.212 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T06:30:25.212Z,1528871425.212 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T06:30:25.358Z,1528871425.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:25.776Z,1528871425.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:28.864Z,1528871428.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:29.024Z,1528871429.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:29.427Z,1528871429.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:29.819Z,1528871429.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:30.216Z,1528871430.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:30.616Z,1528871430.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:30.996Z,1528871430.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:31.419Z,1528871431.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:31.804Z,1528871431.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:32.170Z,1528871432.170 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T06:30:32.170Z,1528871432.170 [NAL9602] Data Fault, FailCount= 2
2018-06-13T06:30:32.170Z,1528871432.170 [NAL9602](ERROR): Data Fault
2018-06-13T06:30:32.206Z,1528871432.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:32.309Z,1528871432.309 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T06:30:32.569Z,1528871432.569 [NAL9602](INFO): Powering down
2018-06-13T06:30:32.605Z,1528871432.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:33.004Z,1528871433.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:33.403Z,1528871433.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:33.489Z,1528871433.489 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T06:30:33.489Z,1528871433.489 [NAL9602] No Fault, FailCount= 2
2018-06-13T06:30:33.807Z,1528871433.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:34.203Z,1528871434.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:34.599Z,1528871434.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:35.002Z,1528871435.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:35.406Z,1528871435.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:35.802Z,1528871435.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:36.209Z,1528871436.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:36.602Z,1528871436.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:37.003Z,1528871437.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:37.405Z,1528871437.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:37.803Z,1528871437.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:38.200Z,1528871438.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:38.608Z,1528871438.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:39.006Z,1528871439.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:39.403Z,1528871439.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:39.803Z,1528871439.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:40.205Z,1528871440.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:40.602Z,1528871440.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:41.007Z,1528871441.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:41.444Z,1528871441.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:41.802Z,1528871441.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:42.216Z,1528871442.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:42.607Z,1528871442.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:43.007Z,1528871443.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:43.405Z,1528871443.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:43.807Z,1528871443.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:44.200Z,1528871444.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:44.606Z,1528871444.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:45.016Z,1528871445.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:45.408Z,1528871445.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:45.804Z,1528871445.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:46.206Z,1528871446.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:46.699Z,1528871446.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:47.010Z,1528871447.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:47.446Z,1528871447.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:47.874Z,1528871447.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:48.272Z,1528871448.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:48.607Z,1528871448.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:49.006Z,1528871449.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:49.418Z,1528871449.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:49.814Z,1528871449.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:50.223Z,1528871450.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:50.606Z,1528871450.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:51.006Z,1528871451.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:51.410Z,1528871451.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:51.820Z,1528871451.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:52.207Z,1528871452.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:52.606Z,1528871452.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:53.023Z,1528871453.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:53.411Z,1528871453.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:53.816Z,1528871453.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:54.207Z,1528871454.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:54.623Z,1528871454.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:55.027Z,1528871455.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:55.414Z,1528871455.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:55.805Z,1528871455.805 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:55.806Z,1528871455.806 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2018-06-13T06:30:55.806Z,1528871455.806 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:30:55.807Z,1528871455.807 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:55.807Z,1528871455.807 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62
2018-06-13T06:30:55.808Z,1528871455.808 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:30:55.809Z,1528871455.809 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:55.810Z,1528871455.810 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62
2018-06-13T06:30:55.810Z,1528871455.810 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:30:55.897Z,1528871455.897 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:30:55.897Z,1528871455.897 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:30:55.898Z,1528871455.898 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:30:56.293Z,1528871456.293 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:30:56.293Z,1528871456.293 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2018-06-13T06:30:56.294Z,1528871456.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:30:56.294Z,1528871456.294 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62
2018-06-13T06:30:56.294Z,1528871456.294 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:30:56.294Z,1528871456.294 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62
2018-06-13T06:30:56.610Z,1528871456.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:30:56.610Z,1528871456.610 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:30:56.611Z,1528871456.611 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:30:56.611Z,1528871456.611 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:30:56.612Z,1528871456.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:30:56.612Z,1528871456.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:30:56.612Z,1528871456.612 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:30:56.613Z,1528871456.613 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:30:56.613Z,1528871456.613 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:30:57.006Z,1528871457.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:30:57.007Z,1528871457.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:57.404Z,1528871457.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:30:57.405Z,1528871457.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:57.820Z,1528871457.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:30:57.820Z,1528871457.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:58.210Z,1528871458.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:30:58.211Z,1528871458.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:58.614Z,1528871458.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:30:58.615Z,1528871458.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:59.012Z,1528871459.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:30:59.012Z,1528871459.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:59.421Z,1528871459.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:30:59.422Z,1528871459.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:30:59.818Z,1528871459.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:30:59.819Z,1528871459.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:00.216Z,1528871460.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:31:00.217Z,1528871460.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:00.610Z,1528871460.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:31:00.611Z,1528871460.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:01.021Z,1528871461.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:31:01.022Z,1528871461.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:01.420Z,1528871461.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:31:01.421Z,1528871461.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:01.820Z,1528871461.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:31:01.821Z,1528871461.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:02.218Z,1528871462.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:31:02.219Z,1528871462.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:02.622Z,1528871462.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:31:02.623Z,1528871462.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:02.962Z,1528871462.962 [NAL9602](INFO): Powering up NAL9602
2018-06-13T06:31:03.025Z,1528871463.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:31:03.025Z,1528871463.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:03.418Z,1528871463.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:31:03.419Z,1528871463.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:03.809Z,1528871463.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:31:03.810Z,1528871463.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:04.225Z,1528871464.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:31:04.226Z,1528871464.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:04.608Z,1528871464.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:31:04.611Z,1528871464.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:05.020Z,1528871465.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:31:05.021Z,1528871465.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:05.415Z,1528871465.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:31:05.416Z,1528871465.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:05.802Z,1528871465.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:31:05.803Z,1528871465.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:06.205Z,1528871466.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:31:06.207Z,1528871466.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:06.618Z,1528871466.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:31:06.619Z,1528871466.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:07.019Z,1528871467.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:31:07.020Z,1528871467.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:07.425Z,1528871467.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:31:07.426Z,1528871467.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:07.819Z,1528871467.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:31:07.819Z,1528871467.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:08.219Z,1528871468.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:31:08.220Z,1528871468.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:08.608Z,1528871468.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:31:08.610Z,1528871468.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:09.029Z,1528871469.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:31:09.030Z,1528871469.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:09.413Z,1528871469.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:31:09.415Z,1528871469.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:09.818Z,1528871469.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:31:09.819Z,1528871469.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:10.219Z,1528871470.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:31:10.220Z,1528871470.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:10.591Z,1528871470.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:31:10.592Z,1528871470.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:11.022Z,1528871471.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:31:11.023Z,1528871471.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:11.398Z,1528871471.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:31:11.398Z,1528871471.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:11.796Z,1528871471.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:31:11.799Z,1528871471.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:12.199Z,1528871472.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:31:12.200Z,1528871472.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:12.599Z,1528871472.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:31:12.600Z,1528871472.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:12.999Z,1528871472.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:31:12.000Z,1528871473.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:13.427Z,1528871473.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:31:13.428Z,1528871473.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:13.765Z,1528871473.765 [NAL9602](INFO): NAL9602 initialized
2018-06-13T06:31:13.835Z,1528871473.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:31:13.836Z,1528871473.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:14.196Z,1528871474.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:31:14.198Z,1528871474.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:14.632Z,1528871474.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:31:14.633Z,1528871474.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:15.030Z,1528871475.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:31:15.030Z,1528871475.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:15.403Z,1528871475.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:31:15.404Z,1528871475.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:15.800Z,1528871475.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T06:31:15.802Z,1528871475.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:16.201Z,1528871476.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:16.600Z,1528871476.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:17.035Z,1528871477.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:17.416Z,1528871477.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:17.808Z,1528871477.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:18.210Z,1528871478.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:18.604Z,1528871478.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:18.999Z,1528871478.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:19.426Z,1528871479.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:19.821Z,1528871479.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:20.214Z,1528871480.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:20.622Z,1528871480.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:21.016Z,1528871481.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:21.401Z,1528871481.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:21.817Z,1528871481.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:22.208Z,1528871482.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:22.612Z,1528871482.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:23.024Z,1528871483.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:23.418Z,1528871483.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:23.810Z,1528871483.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:24.212Z,1528871484.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:24.606Z,1528871484.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:25.005Z,1528871485.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:25.416Z,1528871485.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:25.818Z,1528871485.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:28.924Z,1528871488.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:29.081Z,1528871489.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:29.467Z,1528871489.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:29.884Z,1528871489.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:30.284Z,1528871490.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:30.674Z,1528871490.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:31.071Z,1528871491.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:31.474Z,1528871491.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:31.868Z,1528871491.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:32.271Z,1528871492.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:32.673Z,1528871492.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:33.077Z,1528871493.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:33.477Z,1528871493.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:33.869Z,1528871493.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:34.263Z,1528871494.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:34.695Z,1528871494.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:35.097Z,1528871495.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:35.478Z,1528871495.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:35.869Z,1528871495.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:36.271Z,1528871496.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:36.680Z,1528871496.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:37.074Z,1528871497.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:37.477Z,1528871497.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:37.870Z,1528871497.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:38.270Z,1528871498.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:38.678Z,1528871498.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:39.075Z,1528871499.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:39.492Z,1528871499.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:39.873Z,1528871499.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:40.281Z,1528871500.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:40.682Z,1528871500.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:41.085Z,1528871501.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:41.489Z,1528871501.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:41.870Z,1528871501.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:42.278Z,1528871502.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:42.692Z,1528871502.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:43.082Z,1528871503.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:43.487Z,1528871503.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:43.865Z,1528871503.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:44.292Z,1528871504.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:44.665Z,1528871504.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:45.072Z,1528871505.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:45.468Z,1528871505.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:45.892Z,1528871505.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:46.260Z,1528871506.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:46.657Z,1528871506.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:47.085Z,1528871507.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:47.491Z,1528871507.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:47.866Z,1528871507.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:48.267Z,1528871508.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:48.664Z,1528871508.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:49.056Z,1528871509.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:49.460Z,1528871509.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:49.875Z,1528871509.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:50.271Z,1528871510.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:50.668Z,1528871510.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:51.058Z,1528871511.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:51.455Z,1528871511.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:51.866Z,1528871511.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:52.259Z,1528871512.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:52.662Z,1528871512.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:53.071Z,1528871513.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:53.476Z,1528871513.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:53.867Z,1528871513.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:54.260Z,1528871514.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:54.664Z,1528871514.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:55.062Z,1528871515.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:55.460Z,1528871515.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:55.868Z,1528871515.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:56.267Z,1528871516.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:56.673Z,1528871516.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:57.058Z,1528871517.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:57.461Z,1528871517.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:57.870Z,1528871517.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:58.259Z,1528871518.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:58.664Z,1528871518.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:59.068Z,1528871519.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:59.466Z,1528871519.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:31:59.869Z,1528871519.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:00.264Z,1528871520.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:00.661Z,1528871520.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:01.061Z,1528871521.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:01.464Z,1528871521.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:01.868Z,1528871521.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:02.267Z,1528871522.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:02.668Z,1528871522.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:03.059Z,1528871523.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:03.465Z,1528871523.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:03.860Z,1528871523.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:04.264Z,1528871524.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:04.664Z,1528871524.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:05.067Z,1528871525.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:05.467Z,1528871525.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:05.867Z,1528871525.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:06.258Z,1528871526.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:06.670Z,1528871526.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:07.068Z,1528871527.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:07.464Z,1528871527.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:07.872Z,1528871527.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:08.269Z,1528871528.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:08.669Z,1528871528.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:09.063Z,1528871529.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:09.468Z,1528871529.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:09.860Z,1528871529.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:10.263Z,1528871530.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:10.664Z,1528871530.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:11.068Z,1528871531.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:11.469Z,1528871531.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:11.876Z,1528871531.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:12.264Z,1528871532.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:12.663Z,1528871532.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:13.068Z,1528871533.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:13.464Z,1528871533.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:13.871Z,1528871533.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:14.274Z,1528871534.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:14.669Z,1528871534.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:15.065Z,1528871535.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:15.467Z,1528871535.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:15.873Z,1528871535.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:16.265Z,1528871536.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:16.663Z,1528871536.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:17.075Z,1528871537.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:17.476Z,1528871537.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:17.882Z,1528871537.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:18.261Z,1528871538.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:18.664Z,1528871538.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:19.063Z,1528871539.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:19.469Z,1528871539.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:19.872Z,1528871539.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:20.270Z,1528871540.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:20.673Z,1528871540.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:21.071Z,1528871541.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:21.465Z,1528871541.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:21.866Z,1528871541.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:22.262Z,1528871542.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:22.657Z,1528871542.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:23.071Z,1528871543.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:23.484Z,1528871543.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:23.878Z,1528871543.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:24.253Z,1528871544.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:24.654Z,1528871544.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:25.074Z,1528871545.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:25.456Z,1528871545.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:25.880Z,1528871545.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:28.993Z,1528871548.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:29.175Z,1528871549.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:29.534Z,1528871549.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:29.931Z,1528871549.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:30.330Z,1528871550.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:30.722Z,1528871550.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:31.127Z,1528871551.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:31.554Z,1528871551.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:31.952Z,1528871551.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:32.357Z,1528871552.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:32.729Z,1528871552.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:33.122Z,1528871553.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:33.523Z,1528871553.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:33.928Z,1528871553.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:34.332Z,1528871554.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:34.728Z,1528871554.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:35.127Z,1528871555.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:35.523Z,1528871555.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:35.919Z,1528871555.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:36.323Z,1528871556.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:36.723Z,1528871556.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:37.128Z,1528871557.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:37.531Z,1528871557.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:37.932Z,1528871557.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:38.324Z,1528871558.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:38.723Z,1528871558.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:39.135Z,1528871559.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:39.519Z,1528871559.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:39.937Z,1528871559.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:40.331Z,1528871560.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:40.728Z,1528871560.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:41.123Z,1528871561.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:41.525Z,1528871561.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:41.923Z,1528871561.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:42.324Z,1528871562.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:42.725Z,1528871562.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:43.134Z,1528871563.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:43.529Z,1528871563.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:43.931Z,1528871563.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:44.324Z,1528871564.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:44.728Z,1528871564.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:45.124Z,1528871565.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:45.519Z,1528871565.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:45.936Z,1528871565.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:46.337Z,1528871566.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:46.732Z,1528871566.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:47.123Z,1528871567.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:47.526Z,1528871567.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:47.919Z,1528871567.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:48.323Z,1528871568.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:48.726Z,1528871568.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:49.134Z,1528871569.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:49.536Z,1528871569.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:49.933Z,1528871569.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:50.319Z,1528871570.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:50.724Z,1528871570.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:51.127Z,1528871571.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:51.519Z,1528871571.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:51.933Z,1528871571.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:52.335Z,1528871572.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:52.733Z,1528871572.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:53.124Z,1528871573.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:53.531Z,1528871573.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:53.926Z,1528871573.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:54.324Z,1528871574.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:54.726Z,1528871574.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:55.133Z,1528871575.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:55.536Z,1528871575.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:55.934Z,1528871575.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:56.321Z,1528871576.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:56.726Z,1528871576.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:57.128Z,1528871577.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:57.529Z,1528871577.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:57.937Z,1528871577.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:58.337Z,1528871578.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:58.736Z,1528871578.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:59.136Z,1528871579.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:59.534Z,1528871579.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:32:59.935Z,1528871579.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:00.334Z,1528871580.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:00.733Z,1528871580.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:01.142Z,1528871581.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:01.544Z,1528871581.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:01.940Z,1528871581.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:02.313Z,1528871582.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:02.733Z,1528871582.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:03.120Z,1528871583.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:03.519Z,1528871583.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:03.931Z,1528871583.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:04.332Z,1528871584.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:04.731Z,1528871584.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:05.122Z,1528871585.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:05.523Z,1528871585.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:05.923Z,1528871585.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:06.324Z,1528871586.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:06.722Z,1528871586.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:07.128Z,1528871587.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:07.531Z,1528871587.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:07.931Z,1528871587.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:08.322Z,1528871588.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:08.724Z,1528871588.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:09.136Z,1528871589.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:09.520Z,1528871589.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:09.932Z,1528871589.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:10.333Z,1528871590.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:10.728Z,1528871590.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:11.125Z,1528871591.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:11.523Z,1528871591.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:11.920Z,1528871591.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:12.324Z,1528871592.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:12.722Z,1528871592.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:13.130Z,1528871593.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:13.531Z,1528871593.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:13.932Z,1528871593.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:14.319Z,1528871594.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:14.723Z,1528871594.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:15.124Z,1528871595.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:15.519Z,1528871595.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:15.931Z,1528871595.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:16.331Z,1528871596.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:16.728Z,1528871596.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:17.124Z,1528871597.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:17.533Z,1528871597.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:17.923Z,1528871597.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:18.323Z,1528871598.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:18.736Z,1528871598.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:19.133Z,1528871599.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:19.544Z,1528871599.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:19.946Z,1528871599.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:20.321Z,1528871600.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:20.724Z,1528871600.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:21.135Z,1528871601.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:21.521Z,1528871601.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:21.937Z,1528871601.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:22.337Z,1528871602.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:22.738Z,1528871602.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:23.124Z,1528871603.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:23.532Z,1528871603.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:23.929Z,1528871603.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:24.332Z,1528871604.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:24.732Z,1528871604.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:25.134Z,1528871605.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:25.541Z,1528871605.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:25.933Z,1528871605.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:26.322Z,1528871606.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:26.738Z,1528871606.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:27.138Z,1528871607.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:30.238Z,1528871610.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:30.408Z,1528871610.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:30.793Z,1528871610.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:31.191Z,1528871611.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:31.580Z,1528871611.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:31.968Z,1528871611.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:32.369Z,1528871612.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:32.784Z,1528871612.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:33.198Z,1528871613.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:33.597Z,1528871613.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:33.996Z,1528871613.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:34.372Z,1528871614.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:34.767Z,1528871614.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:35.172Z,1528871615.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:35.580Z,1528871615.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:35.983Z,1528871615.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:36.383Z,1528871616.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:36.779Z,1528871616.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:37.171Z,1528871617.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:37.574Z,1528871617.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:37.980Z,1528871617.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:38.372Z,1528871618.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:38.775Z,1528871618.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:39.180Z,1528871619.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:39.585Z,1528871619.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:39.985Z,1528871619.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:40.384Z,1528871620.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:40.772Z,1528871620.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:41.180Z,1528871621.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:41.579Z,1528871621.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:41.986Z,1528871621.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:42.388Z,1528871622.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:42.785Z,1528871622.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:43.183Z,1528871623.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:43.577Z,1528871623.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:43.984Z,1528871623.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:44.375Z,1528871624.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:44.786Z,1528871624.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:45.187Z,1528871625.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:45.586Z,1528871625.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:45.987Z,1528871625.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:46.385Z,1528871626.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:46.785Z,1528871626.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:47.195Z,1528871627.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:47.584Z,1528871627.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:47.997Z,1528871627.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:48.391Z,1528871628.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:48.793Z,1528871628.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:49.166Z,1528871629.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:49.568Z,1528871629.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:49.968Z,1528871629.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:50.368Z,1528871630.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:50.784Z,1528871630.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:51.180Z,1528871631.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:51.599Z,1528871631.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:52.003Z,1528871632.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:52.376Z,1528871632.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:52.772Z,1528871632.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:53.177Z,1528871633.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:53.573Z,1528871633.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:53.980Z,1528871633.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:54.383Z,1528871634.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:54.779Z,1528871634.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:55.172Z,1528871635.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:55.574Z,1528871635.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:55.974Z,1528871635.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:56.372Z,1528871636.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:56.774Z,1528871636.774 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:56.774Z,1528871636.774 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2018-06-13T06:33:56.774Z,1528871636.774 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:33:56.776Z,1528871636.776 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:56.776Z,1528871636.776 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63
2018-06-13T06:33:56.776Z,1528871636.776 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:33:56.778Z,1528871636.778 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:56.778Z,1528871636.778 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63
2018-06-13T06:33:56.778Z,1528871636.778 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:33:56.856Z,1528871636.856 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:33:56.857Z,1528871636.857 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:33:56.857Z,1528871636.857 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:33:57.257Z,1528871637.257 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:33:57.257Z,1528871637.257 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2018-06-13T06:33:57.257Z,1528871637.257 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:33:57.258Z,1528871637.258 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63
2018-06-13T06:33:57.258Z,1528871637.258 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:33:57.258Z,1528871637.258 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63
2018-06-13T06:33:57.583Z,1528871637.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:33:57.584Z,1528871637.584 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:33:57.584Z,1528871637.584 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:33:57.584Z,1528871637.584 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:33:57.585Z,1528871637.585 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:33:57.586Z,1528871637.586 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:33:57.586Z,1528871637.586 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:33:57.587Z,1528871637.587 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:33:57.587Z,1528871637.587 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:33:57.992Z,1528871637.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:33:57.994Z,1528871637.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:58.380Z,1528871638.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:33:58.381Z,1528871638.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:58.788Z,1528871638.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:33:58.789Z,1528871638.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:59.176Z,1528871639.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:33:59.178Z,1528871639.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:59.577Z,1528871639.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:33:59.577Z,1528871639.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:33:59.985Z,1528871639.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:33:59.986Z,1528871639.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:00.392Z,1528871640.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:34:00.393Z,1528871640.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:00.795Z,1528871640.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:34:00.796Z,1528871640.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:01.184Z,1528871641.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:34:01.185Z,1528871641.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:01.592Z,1528871641.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:34:01.593Z,1528871641.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:01.993Z,1528871641.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:34:01.994Z,1528871641.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:02.385Z,1528871642.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:34:02.386Z,1528871642.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:02.768Z,1528871642.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:34:02.769Z,1528871642.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:03.198Z,1528871643.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:34:03.199Z,1528871643.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:03.601Z,1528871643.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:34:03.602Z,1528871643.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:03.998Z,1528871643.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:34:03.999Z,1528871643.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:04.371Z,1528871644.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:34:04.372Z,1528871644.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:04.771Z,1528871644.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:34:04.772Z,1528871644.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:05.176Z,1528871645.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:34:05.177Z,1528871645.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:05.571Z,1528871645.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:34:05.572Z,1528871645.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:05.983Z,1528871645.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:34:05.983Z,1528871645.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:06.382Z,1528871646.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:34:06.383Z,1528871646.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:06.783Z,1528871646.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:34:06.784Z,1528871646.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:07.174Z,1528871647.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:34:07.175Z,1528871647.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:07.573Z,1528871647.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:34:07.574Z,1528871647.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:07.973Z,1528871647.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:34:07.974Z,1528871647.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:08.376Z,1528871648.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:34:08.377Z,1528871648.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:08.776Z,1528871648.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:34:08.777Z,1528871648.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:09.175Z,1528871649.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:34:09.176Z,1528871649.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:09.582Z,1528871649.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:34:09.583Z,1528871649.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:09.983Z,1528871649.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:34:09.983Z,1528871649.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:10.379Z,1528871650.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:34:10.380Z,1528871650.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:10.774Z,1528871650.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:34:10.775Z,1528871650.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:11.174Z,1528871651.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:34:11.175Z,1528871651.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:11.572Z,1528871651.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:34:11.573Z,1528871651.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:11.983Z,1528871651.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:34:11.983Z,1528871651.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:12.383Z,1528871652.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:34:12.384Z,1528871652.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:12.779Z,1528871652.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:34:12.780Z,1528871652.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:13.180Z,1528871653.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:34:13.181Z,1528871653.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:13.572Z,1528871653.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:34:13.574Z,1528871653.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:13.980Z,1528871653.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:34:13.981Z,1528871653.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:14.380Z,1528871654.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:34:14.382Z,1528871654.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:14.773Z,1528871654.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:34:14.774Z,1528871654.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:15.179Z,1528871655.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:34:15.180Z,1528871655.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:15.582Z,1528871655.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:34:15.583Z,1528871655.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:15.982Z,1528871655.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:34:15.983Z,1528871655.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:16.380Z,1528871656.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:34:16.381Z,1528871656.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:16.776Z,1528871656.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:17.188Z,1528871657.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:17.578Z,1528871657.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:17.985Z,1528871657.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:18.388Z,1528871658.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:18.784Z,1528871658.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:19.176Z,1528871659.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:19.576Z,1528871659.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:19.976Z,1528871659.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:20.383Z,1528871660.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:20.774Z,1528871660.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:21.192Z,1528871661.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:21.588Z,1528871661.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:21.989Z,1528871661.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:22.377Z,1528871662.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:22.780Z,1528871662.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:23.176Z,1528871663.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:23.584Z,1528871663.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:23.985Z,1528871663.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:24.383Z,1528871664.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:24.784Z,1528871664.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:25.176Z,1528871665.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:25.575Z,1528871665.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:25.975Z,1528871665.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:29.112Z,1528871669.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:29.281Z,1528871669.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:29.670Z,1528871669.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:30.071Z,1528871670.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:30.469Z,1528871670.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:30.867Z,1528871670.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:31.266Z,1528871671.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:31.669Z,1528871671.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:32.072Z,1528871672.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:32.472Z,1528871672.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:32.872Z,1528871672.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:33.265Z,1528871673.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:33.648Z,1528871673.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:34.064Z,1528871674.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:34.452Z,1528871674.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:34.848Z,1528871674.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:35.277Z,1528871675.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:35.675Z,1528871675.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:36.071Z,1528871676.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:36.452Z,1528871676.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:36.853Z,1528871676.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:37.252Z,1528871677.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:37.656Z,1528871677.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:38.079Z,1528871678.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:38.462Z,1528871678.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:38.859Z,1528871678.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:39.256Z,1528871679.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:39.653Z,1528871679.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:40.055Z,1528871680.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:40.463Z,1528871680.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:40.854Z,1528871680.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:41.293Z,1528871681.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:41.665Z,1528871681.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:42.060Z,1528871682.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:42.457Z,1528871682.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:42.855Z,1528871682.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:43.256Z,1528871683.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:43.656Z,1528871683.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:44.064Z,1528871684.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:44.463Z,1528871684.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:44.864Z,1528871684.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:45.257Z,1528871685.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:45.651Z,1528871685.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:46.060Z,1528871686.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:46.455Z,1528871686.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:46.864Z,1528871686.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:47.269Z,1528871687.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:47.669Z,1528871687.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:48.066Z,1528871688.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:48.467Z,1528871688.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:48.863Z,1528871688.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:49.262Z,1528871689.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:49.661Z,1528871689.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:50.066Z,1528871690.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:50.469Z,1528871690.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:50.865Z,1528871690.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:51.268Z,1528871691.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:51.660Z,1528871691.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:52.065Z,1528871692.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:52.470Z,1528871692.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:52.844Z,1528871692.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:53.276Z,1528871693.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:53.672Z,1528871693.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:54.075Z,1528871694.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:54.448Z,1528871694.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:54.848Z,1528871694.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:55.248Z,1528871695.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:55.651Z,1528871695.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:56.072Z,1528871696.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:56.458Z,1528871696.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:56.879Z,1528871696.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:57.252Z,1528871697.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:57.650Z,1528871697.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:58.052Z,1528871698.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:58.456Z,1528871698.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:58.854Z,1528871698.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:59.259Z,1528871699.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:34:59.663Z,1528871699.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:00.059Z,1528871700.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:00.455Z,1528871700.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:00.856Z,1528871700.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:01.255Z,1528871701.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:01.654Z,1528871701.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:02.060Z,1528871702.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:02.459Z,1528871702.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:02.860Z,1528871702.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:03.260Z,1528871703.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:03.651Z,1528871703.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:04.053Z,1528871704.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:04.454Z,1528871704.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:04.855Z,1528871704.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:05.263Z,1528871705.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:05.694Z,1528871705.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:06.063Z,1528871706.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:06.454Z,1528871706.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:06.854Z,1528871706.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:07.253Z,1528871707.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:07.655Z,1528871707.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:08.064Z,1528871708.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:08.461Z,1528871708.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:08.863Z,1528871708.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:09.267Z,1528871709.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:09.655Z,1528871709.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:10.056Z,1528871710.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:10.469Z,1528871710.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:10.852Z,1528871710.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:11.264Z,1528871711.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:11.669Z,1528871711.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:12.062Z,1528871712.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:12.457Z,1528871712.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:12.864Z,1528871712.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:13.252Z,1528871713.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:13.655Z,1528871713.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:14.065Z,1528871714.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:14.461Z,1528871714.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:14.864Z,1528871714.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:15.265Z,1528871715.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:15.652Z,1528871715.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:16.054Z,1528871716.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:16.459Z,1528871716.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:16.851Z,1528871716.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:17.268Z,1528871717.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:17.668Z,1528871717.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:18.064Z,1528871718.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:18.455Z,1528871718.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:18.854Z,1528871718.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:19.260Z,1528871719.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:19.655Z,1528871719.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:20.065Z,1528871720.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:20.472Z,1528871720.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:20.872Z,1528871720.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:21.259Z,1528871721.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:21.652Z,1528871721.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:22.055Z,1528871722.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:22.459Z,1528871722.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:22.851Z,1528871722.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:23.268Z,1528871723.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:23.669Z,1528871723.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:24.065Z,1528871724.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:24.455Z,1528871724.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:24.855Z,1528871724.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:25.256Z,1528871725.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:25.654Z,1528871725.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:25.657Z,1528871725.657 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T06:35:25.657Z,1528871725.657 [Default:CheckIn:C.Wait] Stopped
2018-06-13T06:35:25.657Z,1528871725.657 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T06:35:25.657Z,1528871725.657 [Default:CheckIn:D] Running Loop=1
2018-06-13T06:35:26.069Z,1528871726.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:26.072Z,1528871726.072 [Default:CheckIn:D] Stopped
2018-06-13T06:35:26.072Z,1528871726.072 [Default:CheckIn:E] Running Loop=1
2018-06-13T06:35:29.183Z,1528871729.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:29.202Z,1528871729.202 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 188.210449 min 
2018-06-13T06:35:29.203Z,1528871729.203 [Default:CheckIn:E] Stopped
2018-06-13T06:35:29.203Z,1528871729.203 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T06:35:29.203Z,1528871729.203 [Default:CheckIn] Stopped
2018-06-13T06:35:29.203Z,1528871729.203 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T06:35:29.203Z,1528871729.203 [Default:CheckIn](INFO): Running loop #19
2018-06-13T06:35:29.203Z,1528871729.203 [Default:CheckIn] Running Loop=19
2018-06-13T06:35:29.203Z,1528871729.203 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T06:35:29.203Z,1528871729.203 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T06:35:29.376Z,1528871729.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:29.734Z,1528871729.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:30.157Z,1528871730.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:30.540Z,1528871730.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:30.936Z,1528871730.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:31.343Z,1528871731.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:31.747Z,1528871731.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:32.147Z,1528871732.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:32.538Z,1528871732.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:32.938Z,1528871732.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:33.339Z,1528871733.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:33.735Z,1528871733.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:34.148Z,1528871734.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:34.547Z,1528871734.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:34.945Z,1528871734.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:35.340Z,1528871735.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:35.749Z,1528871735.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:36.141Z,1528871736.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:36.539Z,1528871736.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:36.940Z,1528871736.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:37.348Z,1528871737.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:37.752Z,1528871737.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:38.148Z,1528871738.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:38.535Z,1528871738.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:38.949Z,1528871738.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:39.342Z,1528871739.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:39.739Z,1528871739.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:40.151Z,1528871740.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:40.552Z,1528871740.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:40.956Z,1528871740.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:41.340Z,1528871741.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:41.739Z,1528871741.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:42.137Z,1528871742.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:42.544Z,1528871742.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:42.946Z,1528871742.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:43.348Z,1528871743.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:43.752Z,1528871743.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:44.152Z,1528871744.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:44.541Z,1528871744.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:44.940Z,1528871744.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:45.348Z,1528871745.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:45.753Z,1528871745.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:46.152Z,1528871746.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:46.557Z,1528871746.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:46.948Z,1528871746.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:47.340Z,1528871747.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:47.742Z,1528871747.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:48.141Z,1528871748.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:48.548Z,1528871748.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:48.949Z,1528871748.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:49.350Z,1528871749.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:49.751Z,1528871749.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:50.149Z,1528871750.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:50.536Z,1528871750.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:50.940Z,1528871750.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:51.351Z,1528871751.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:51.728Z,1528871751.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:52.155Z,1528871752.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:52.561Z,1528871752.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:52.958Z,1528871752.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:53.338Z,1528871753.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:53.760Z,1528871753.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:54.132Z,1528871754.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:54.540Z,1528871754.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:54.936Z,1528871754.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:55.344Z,1528871755.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:55.764Z,1528871755.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:56.143Z,1528871756.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:56.536Z,1528871756.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:56.940Z,1528871756.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:57.340Z,1528871757.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:57.736Z,1528871757.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:58.145Z,1528871758.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:58.544Z,1528871758.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:58.945Z,1528871758.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:59.350Z,1528871759.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:35:59.739Z,1528871759.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:00.137Z,1528871760.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:00.540Z,1528871760.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:00.939Z,1528871760.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:01.344Z,1528871761.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:01.747Z,1528871761.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:02.144Z,1528871762.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:02.536Z,1528871762.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:02.940Z,1528871762.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:03.340Z,1528871763.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:03.736Z,1528871763.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:04.148Z,1528871764.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:04.546Z,1528871764.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:04.948Z,1528871764.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:05.340Z,1528871765.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:05.748Z,1528871765.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:06.136Z,1528871766.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:06.544Z,1528871766.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:06.939Z,1528871766.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:07.344Z,1528871767.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:07.770Z,1528871767.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:08.144Z,1528871768.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:08.539Z,1528871768.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:08.940Z,1528871768.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:09.338Z,1528871769.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:09.736Z,1528871769.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:10.148Z,1528871770.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:10.546Z,1528871770.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:10.944Z,1528871770.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:11.339Z,1528871771.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:11.741Z,1528871771.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:12.139Z,1528871772.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:12.544Z,1528871772.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:12.938Z,1528871772.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:13.347Z,1528871773.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:13.747Z,1528871773.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:14.143Z,1528871774.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:14.540Z,1528871774.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:14.939Z,1528871774.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:15.339Z,1528871775.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:15.739Z,1528871775.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:16.144Z,1528871776.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:16.547Z,1528871776.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:16.952Z,1528871776.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:17.342Z,1528871777.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:17.748Z,1528871777.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:18.140Z,1528871778.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:18.539Z,1528871778.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:18.938Z,1528871778.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:19.347Z,1528871779.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:19.747Z,1528871779.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:20.143Z,1528871780.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:20.540Z,1528871780.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:20.938Z,1528871780.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:21.338Z,1528871781.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:21.739Z,1528871781.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:22.147Z,1528871782.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:22.547Z,1528871782.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:22.947Z,1528871782.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:23.340Z,1528871783.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:23.752Z,1528871783.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:24.153Z,1528871784.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:24.552Z,1528871784.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:24.949Z,1528871784.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:25.342Z,1528871785.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:25.743Z,1528871785.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:26.156Z,1528871786.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:29.267Z,1528871789.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:29.452Z,1528871789.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:29.836Z,1528871789.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:30.244Z,1528871790.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:30.620Z,1528871790.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:31.012Z,1528871791.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:31.441Z,1528871791.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:31.823Z,1528871791.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:32.220Z,1528871792.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:32.616Z,1528871792.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:33.020Z,1528871793.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:33.415Z,1528871793.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:33.815Z,1528871793.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:34.224Z,1528871794.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:34.624Z,1528871794.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:35.024Z,1528871795.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:35.420Z,1528871795.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:35.820Z,1528871795.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:36.304Z,1528871796.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:36.624Z,1528871796.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:37.035Z,1528871797.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:37.424Z,1528871797.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:37.824Z,1528871797.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:38.221Z,1528871798.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:38.616Z,1528871798.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:39.016Z,1528871799.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:39.420Z,1528871799.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:39.816Z,1528871799.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:40.232Z,1528871800.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:40.632Z,1528871800.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:41.026Z,1528871801.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:41.426Z,1528871801.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:41.817Z,1528871801.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:42.230Z,1528871802.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:42.622Z,1528871802.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:43.028Z,1528871803.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:43.426Z,1528871803.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:43.825Z,1528871803.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:44.237Z,1528871804.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:44.616Z,1528871804.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:45.018Z,1528871805.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:45.422Z,1528871805.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:45.830Z,1528871805.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:46.232Z,1528871806.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:46.630Z,1528871806.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:47.027Z,1528871807.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:47.429Z,1528871807.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:47.825Z,1528871807.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:48.215Z,1528871808.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:48.618Z,1528871808.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:49.015Z,1528871809.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:49.428Z,1528871809.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:49.831Z,1528871809.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:50.227Z,1528871810.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:50.624Z,1528871810.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:51.024Z,1528871811.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:51.421Z,1528871811.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:51.815Z,1528871811.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:52.227Z,1528871812.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:52.632Z,1528871812.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:53.027Z,1528871813.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:53.418Z,1528871813.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:53.819Z,1528871813.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:54.224Z,1528871814.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:54.621Z,1528871814.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:55.028Z,1528871815.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:55.434Z,1528871815.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:55.830Z,1528871815.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:56.227Z,1528871816.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:56.630Z,1528871816.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:57.017Z,1528871817.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:57.427Z,1528871817.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:57.813Z,1528871817.813 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:57.813Z,1528871817.813 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2018-06-13T06:36:57.813Z,1528871817.813 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:36:57.815Z,1528871817.815 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:57.815Z,1528871817.815 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64
2018-06-13T06:36:57.815Z,1528871817.815 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:36:57.821Z,1528871817.821 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:57.821Z,1528871817.821 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64
2018-06-13T06:36:57.821Z,1528871817.821 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:36:57.905Z,1528871817.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:36:57.905Z,1528871817.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:36:57.905Z,1528871817.905 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:36:58.305Z,1528871818.305 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:36:58.305Z,1528871818.305 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2018-06-13T06:36:58.306Z,1528871818.306 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:36:58.306Z,1528871818.306 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64
2018-06-13T06:36:58.306Z,1528871818.306 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:36:58.306Z,1528871818.306 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64
2018-06-13T06:36:58.642Z,1528871818.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:36:58.642Z,1528871818.642 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:36:58.642Z,1528871818.642 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:36:58.643Z,1528871818.643 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:36:58.643Z,1528871818.643 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:36:58.643Z,1528871818.643 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:36:58.644Z,1528871818.644 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:36:58.644Z,1528871818.644 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:36:58.644Z,1528871818.644 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:36:59.034Z,1528871819.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:36:59.035Z,1528871819.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:59.432Z,1528871819.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:36:59.437Z,1528871819.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:36:59.816Z,1528871819.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:36:59.833Z,1528871819.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:00.212Z,1528871820.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:37:00.213Z,1528871820.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:00.616Z,1528871820.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:37:00.617Z,1528871820.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:01.012Z,1528871821.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:37:01.013Z,1528871821.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:01.420Z,1528871821.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:37:01.421Z,1528871821.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:01.844Z,1528871821.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:37:01.849Z,1528871821.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:02.248Z,1528871822.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:37:02.253Z,1528871822.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:02.615Z,1528871822.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:37:02.616Z,1528871822.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:03.014Z,1528871823.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:37:03.015Z,1528871823.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:03.425Z,1528871823.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:37:03.426Z,1528871823.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:03.811Z,1528871823.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:37:03.812Z,1528871823.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:04.225Z,1528871824.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:37:04.226Z,1528871824.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:04.632Z,1528871824.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:37:04.649Z,1528871824.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:05.025Z,1528871825.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:37:05.026Z,1528871825.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:05.430Z,1528871825.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:37:05.431Z,1528871825.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:05.826Z,1528871825.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:37:05.827Z,1528871825.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:06.212Z,1528871826.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:37:06.213Z,1528871826.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:06.626Z,1528871826.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:37:06.627Z,1528871826.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:07.018Z,1528871827.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:37:07.019Z,1528871827.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:07.425Z,1528871827.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:37:07.426Z,1528871827.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:07.828Z,1528871827.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:37:07.829Z,1528871827.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:08.227Z,1528871828.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:37:08.227Z,1528871828.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:08.616Z,1528871828.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:37:08.617Z,1528871828.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:09.024Z,1528871829.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:37:09.029Z,1528871829.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:09.428Z,1528871829.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:37:09.429Z,1528871829.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:09.828Z,1528871829.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:37:09.829Z,1528871829.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:10.227Z,1528871830.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:37:10.228Z,1528871830.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:10.630Z,1528871830.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:37:10.631Z,1528871830.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:11.025Z,1528871831.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:37:11.026Z,1528871831.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:11.417Z,1528871831.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:37:11.418Z,1528871831.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:11.819Z,1528871831.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:37:11.820Z,1528871831.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:12.226Z,1528871832.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:37:12.227Z,1528871832.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:12.631Z,1528871832.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:37:12.632Z,1528871832.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:13.027Z,1528871833.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:37:13.028Z,1528871833.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:13.421Z,1528871833.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:37:13.422Z,1528871833.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:13.826Z,1528871833.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:37:13.827Z,1528871833.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:14.230Z,1528871834.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:37:14.231Z,1528871834.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:14.636Z,1528871834.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:37:14.637Z,1528871834.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:15.032Z,1528871835.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:37:15.033Z,1528871835.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:15.422Z,1528871835.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:37:15.423Z,1528871835.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:15.828Z,1528871835.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:37:15.833Z,1528871835.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:16.235Z,1528871836.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:37:16.236Z,1528871836.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:16.637Z,1528871836.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:37:16.638Z,1528871836.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:17.036Z,1528871837.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:37:17.037Z,1528871837.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:17.416Z,1528871837.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:37:17.433Z,1528871837.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:17.813Z,1528871837.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T06:37:17.814Z,1528871837.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:18.241Z,1528871838.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:18.641Z,1528871838.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:19.042Z,1528871839.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:19.416Z,1528871839.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:19.812Z,1528871839.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:20.244Z,1528871840.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:20.647Z,1528871840.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:21.020Z,1528871841.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:21.421Z,1528871841.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:21.813Z,1528871841.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:22.228Z,1528871842.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:22.645Z,1528871842.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:23.022Z,1528871843.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:23.427Z,1528871843.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:23.816Z,1528871843.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:24.227Z,1528871844.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:24.632Z,1528871844.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:25.025Z,1528871845.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:25.415Z,1528871845.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:25.820Z,1528871845.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:26.228Z,1528871846.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:29.335Z,1528871849.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:29.528Z,1528871849.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:29.908Z,1528871849.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:30.290Z,1528871850.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:30.699Z,1528871850.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:31.095Z,1528871851.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:31.500Z,1528871851.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:31.908Z,1528871851.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:32.300Z,1528871852.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:32.693Z,1528871852.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:33.094Z,1528871853.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:33.495Z,1528871853.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:33.892Z,1528871853.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:34.300Z,1528871854.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:34.704Z,1528871854.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:35.105Z,1528871855.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:35.496Z,1528871855.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:35.894Z,1528871855.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:36.291Z,1528871856.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:36.696Z,1528871856.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:37.094Z,1528871857.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:37.499Z,1528871857.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:37.909Z,1528871857.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:38.306Z,1528871858.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:38.708Z,1528871858.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:39.097Z,1528871859.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:39.500Z,1528871859.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:39.908Z,1528871859.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:40.309Z,1528871860.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:40.716Z,1528871860.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:41.106Z,1528871861.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:41.498Z,1528871861.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:41.899Z,1528871861.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:42.299Z,1528871862.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:42.697Z,1528871862.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:43.101Z,1528871863.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:43.506Z,1528871863.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:43.909Z,1528871863.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:44.306Z,1528871864.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:44.704Z,1528871864.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:45.098Z,1528871865.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:45.499Z,1528871865.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:45.897Z,1528871865.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:46.306Z,1528871866.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:46.704Z,1528871866.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:47.106Z,1528871867.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:47.496Z,1528871867.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:47.898Z,1528871867.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:48.297Z,1528871868.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:48.697Z,1528871868.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:49.108Z,1528871869.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:49.506Z,1528871869.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:49.916Z,1528871869.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:50.301Z,1528871870.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:50.703Z,1528871870.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:51.096Z,1528871871.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:51.499Z,1528871871.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:51.901Z,1528871871.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:52.305Z,1528871872.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:52.708Z,1528871872.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:53.106Z,1528871873.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:53.504Z,1528871873.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:53.909Z,1528871873.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:54.284Z,1528871874.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:54.708Z,1528871874.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:55.088Z,1528871875.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:55.519Z,1528871875.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:55.919Z,1528871875.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:56.303Z,1528871876.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:56.691Z,1528871876.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:57.093Z,1528871877.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:57.494Z,1528871877.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:57.891Z,1528871877.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:58.299Z,1528871878.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:58.703Z,1528871878.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:59.104Z,1528871879.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:59.496Z,1528871879.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:37:59.892Z,1528871879.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:00.302Z,1528871880.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:00.700Z,1528871880.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:01.099Z,1528871881.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:01.492Z,1528871881.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:01.900Z,1528871881.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:02.300Z,1528871882.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:02.699Z,1528871882.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:03.099Z,1528871883.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:03.496Z,1528871883.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:03.891Z,1528871883.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:04.299Z,1528871884.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:04.699Z,1528871884.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:05.104Z,1528871885.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:05.496Z,1528871885.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:05.895Z,1528871885.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:06.305Z,1528871886.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:06.704Z,1528871886.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:07.104Z,1528871887.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:07.492Z,1528871887.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:07.900Z,1528871887.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:08.304Z,1528871888.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:08.704Z,1528871888.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:09.102Z,1528871889.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:09.502Z,1528871889.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:09.892Z,1528871889.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:10.307Z,1528871890.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:10.704Z,1528871890.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:11.104Z,1528871891.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:11.498Z,1528871891.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:11.900Z,1528871891.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:12.306Z,1528871892.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:12.708Z,1528871892.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:13.112Z,1528871893.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:13.496Z,1528871893.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:13.896Z,1528871893.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:14.308Z,1528871894.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:14.704Z,1528871894.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:15.108Z,1528871895.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:15.502Z,1528871895.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:15.891Z,1528871895.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:16.304Z,1528871896.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:16.703Z,1528871896.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:17.106Z,1528871897.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:17.497Z,1528871897.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:17.907Z,1528871897.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:18.304Z,1528871898.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:18.708Z,1528871898.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:19.104Z,1528871899.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:19.496Z,1528871899.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:19.897Z,1528871899.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:20.308Z,1528871900.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:20.704Z,1528871900.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:21.104Z,1528871901.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:21.495Z,1528871901.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:21.895Z,1528871901.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:22.304Z,1528871902.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:22.704Z,1528871902.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:23.105Z,1528871903.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:23.495Z,1528871903.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:23.895Z,1528871903.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:24.304Z,1528871904.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:24.708Z,1528871904.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:25.108Z,1528871905.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:25.496Z,1528871905.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:25.899Z,1528871905.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:26.303Z,1528871906.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:29.435Z,1528871909.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:29.628Z,1528871909.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:29.988Z,1528871909.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:30.385Z,1528871910.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:30.785Z,1528871910.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:31.168Z,1528871911.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:31.591Z,1528871911.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:32.000Z,1528871912.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:32.398Z,1528871912.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:32.772Z,1528871912.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:33.176Z,1528871913.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:33.571Z,1528871913.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:33.971Z,1528871913.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:34.399Z,1528871914.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:34.804Z,1528871914.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:35.183Z,1528871915.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:35.571Z,1528871915.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:35.973Z,1528871915.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:36.374Z,1528871916.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:36.786Z,1528871916.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:37.176Z,1528871917.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:37.583Z,1528871917.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:37.983Z,1528871917.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:38.384Z,1528871918.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:38.776Z,1528871918.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:39.175Z,1528871919.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:39.580Z,1528871919.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:39.980Z,1528871919.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:40.384Z,1528871920.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:40.789Z,1528871920.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:41.183Z,1528871921.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:41.576Z,1528871921.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:41.977Z,1528871921.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:42.376Z,1528871922.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:42.775Z,1528871922.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:43.180Z,1528871923.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:43.584Z,1528871923.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:43.984Z,1528871923.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:44.384Z,1528871924.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:44.776Z,1528871924.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:45.174Z,1528871925.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:45.579Z,1528871925.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:45.975Z,1528871925.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:46.388Z,1528871926.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:46.788Z,1528871926.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:47.188Z,1528871927.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:47.576Z,1528871927.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:47.978Z,1528871927.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:48.376Z,1528871928.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:48.776Z,1528871928.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:49.178Z,1528871929.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:49.588Z,1528871929.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:49.988Z,1528871929.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:50.384Z,1528871930.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:50.780Z,1528871930.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:51.176Z,1528871931.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:51.575Z,1528871931.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:51.980Z,1528871931.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:52.384Z,1528871932.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:52.785Z,1528871932.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:53.192Z,1528871933.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:53.575Z,1528871933.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:53.984Z,1528871933.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:54.380Z,1528871934.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:54.777Z,1528871934.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:55.188Z,1528871935.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:55.585Z,1528871935.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:55.984Z,1528871935.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:56.386Z,1528871936.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:56.777Z,1528871936.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:57.177Z,1528871937.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:57.581Z,1528871937.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:57.976Z,1528871937.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:58.388Z,1528871938.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:58.792Z,1528871938.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:59.185Z,1528871939.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:59.577Z,1528871939.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:38:59.975Z,1528871939.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:00.389Z,1528871940.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:00.789Z,1528871940.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:01.185Z,1528871941.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:01.576Z,1528871941.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:01.977Z,1528871941.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:02.385Z,1528871942.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:02.786Z,1528871942.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:03.192Z,1528871943.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:03.589Z,1528871943.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:03.977Z,1528871943.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:04.385Z,1528871944.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:04.792Z,1528871944.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:05.186Z,1528871945.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:05.578Z,1528871945.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:05.979Z,1528871945.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:06.391Z,1528871946.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:06.792Z,1528871946.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:07.192Z,1528871947.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:07.581Z,1528871947.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:07.984Z,1528871947.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:08.386Z,1528871948.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:08.786Z,1528871948.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:09.185Z,1528871949.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:09.579Z,1528871949.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:09.977Z,1528871949.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:10.389Z,1528871950.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:10.789Z,1528871950.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:11.189Z,1528871951.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:11.578Z,1528871951.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:11.987Z,1528871951.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:12.390Z,1528871952.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:12.788Z,1528871952.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:13.188Z,1528871953.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:13.578Z,1528871953.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:13.976Z,1528871953.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:14.386Z,1528871954.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:14.785Z,1528871954.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:15.184Z,1528871955.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:15.590Z,1528871955.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:15.987Z,1528871955.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:16.386Z,1528871956.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:16.789Z,1528871956.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:17.194Z,1528871957.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:17.584Z,1528871957.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:17.988Z,1528871957.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:18.390Z,1528871958.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:18.787Z,1528871958.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:19.190Z,1528871959.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:19.582Z,1528871959.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:19.982Z,1528871959.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:20.385Z,1528871960.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:20.786Z,1528871960.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:21.190Z,1528871961.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:21.583Z,1528871961.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:21.984Z,1528871961.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:22.389Z,1528871962.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:22.790Z,1528871962.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:23.197Z,1528871963.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:23.584Z,1528871963.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:23.968Z,1528871963.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:24.395Z,1528871964.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:24.795Z,1528871964.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:25.200Z,1528871965.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:25.573Z,1528871965.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:25.973Z,1528871965.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:26.396Z,1528871966.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:29.505Z,1528871969.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:29.676Z,1528871969.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:30.055Z,1528871970.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:30.454Z,1528871970.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:30.853Z,1528871970.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:31.259Z,1528871971.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:31.659Z,1528871971.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:32.059Z,1528871972.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:32.463Z,1528871972.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:32.832Z,1528871972.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:33.256Z,1528871973.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:33.638Z,1528871973.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:34.038Z,1528871974.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:34.466Z,1528871974.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:34.865Z,1528871974.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:35.263Z,1528871975.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:35.637Z,1528871975.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:36.042Z,1528871976.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:36.437Z,1528871976.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:36.848Z,1528871976.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:37.244Z,1528871977.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:37.647Z,1528871977.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:38.067Z,1528871978.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:38.464Z,1528871978.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:38.841Z,1528871978.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:39.240Z,1528871979.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:39.642Z,1528871979.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:40.039Z,1528871980.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:40.451Z,1528871980.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:40.872Z,1528871980.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:41.251Z,1528871981.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:41.645Z,1528871981.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:42.043Z,1528871982.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:42.448Z,1528871982.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:42.873Z,1528871982.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:43.248Z,1528871983.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:43.648Z,1528871983.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:44.045Z,1528871984.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:44.448Z,1528871984.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:44.848Z,1528871984.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:45.248Z,1528871985.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:45.643Z,1528871985.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:46.039Z,1528871986.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:46.447Z,1528871986.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:46.851Z,1528871986.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:47.252Z,1528871987.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:47.644Z,1528871987.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:48.042Z,1528871988.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:48.447Z,1528871988.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:48.851Z,1528871988.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:49.278Z,1528871989.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:49.644Z,1528871989.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:50.044Z,1528871990.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:50.449Z,1528871990.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:50.847Z,1528871990.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:51.248Z,1528871991.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:51.643Z,1528871991.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:52.040Z,1528871992.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:52.476Z,1528871992.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:52.856Z,1528871992.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:53.252Z,1528871993.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:53.643Z,1528871993.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:54.046Z,1528871994.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:54.448Z,1528871994.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:54.851Z,1528871994.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:55.256Z,1528871995.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:55.640Z,1528871995.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:56.044Z,1528871996.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:56.452Z,1528871996.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:56.848Z,1528871996.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:57.248Z,1528871997.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:57.651Z,1528871997.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:58.044Z,1528871998.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:58.452Z,1528871998.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:58.851Z,1528871998.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:58.851Z,1528871998.851 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65
2018-06-13T06:39:58.851Z,1528871998.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:39:58.853Z,1528871998.853 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:58.853Z,1528871998.853 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65
2018-06-13T06:39:58.854Z,1528871998.854 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:39:58.855Z,1528871998.855 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:39:58.855Z,1528871998.855 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 65
2018-06-13T06:39:58.855Z,1528871998.855 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:39:58.949Z,1528871998.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:39:58.949Z,1528871998.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:39:58.950Z,1528871998.950 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:39:59.329Z,1528871999.329 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:39:59.329Z,1528871999.329 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65
2018-06-13T06:39:59.330Z,1528871999.330 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:39:59.330Z,1528871999.330 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65
2018-06-13T06:39:59.330Z,1528871999.330 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:39:59.330Z,1528871999.330 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 65
2018-06-13T06:39:59.643Z,1528871999.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:39:59.644Z,1528871999.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:39:59.644Z,1528871999.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:39:59.645Z,1528871999.645 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:39:59.645Z,1528871999.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:39:59.645Z,1528871999.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:39:59.646Z,1528871999.646 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:39:59.646Z,1528871999.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:39:59.646Z,1528871999.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:40:00.051Z,1528872000.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:40:00.052Z,1528872000.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:00.453Z,1528872000.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:40:00.454Z,1528872000.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:00.855Z,1528872000.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:40:00.855Z,1528872000.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:01.253Z,1528872001.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:40:01.254Z,1528872001.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:01.649Z,1528872001.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:40:01.650Z,1528872001.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:02.058Z,1528872002.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:40:02.059Z,1528872002.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:02.453Z,1528872002.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:40:02.454Z,1528872002.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:02.860Z,1528872002.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:40:02.861Z,1528872002.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:03.272Z,1528872003.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:40:03.272Z,1528872003.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:03.646Z,1528872003.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:40:03.647Z,1528872003.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:04.046Z,1528872004.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:40:04.047Z,1528872004.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:04.457Z,1528872004.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:40:04.458Z,1528872004.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:04.857Z,1528872004.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:40:04.858Z,1528872004.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:05.254Z,1528872005.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:40:05.255Z,1528872005.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:05.644Z,1528872005.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:40:05.645Z,1528872005.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:06.046Z,1528872006.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:40:06.046Z,1528872006.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:06.457Z,1528872006.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:40:06.458Z,1528872006.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:06.859Z,1528872006.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:40:06.860Z,1528872006.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:07.254Z,1528872007.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:40:07.254Z,1528872007.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:07.645Z,1528872007.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:40:07.646Z,1528872007.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:08.043Z,1528872008.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:40:08.044Z,1528872008.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:08.453Z,1528872008.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:40:08.454Z,1528872008.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:08.854Z,1528872008.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:40:08.855Z,1528872008.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:09.253Z,1528872009.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:40:09.254Z,1528872009.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:09.651Z,1528872009.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:40:09.652Z,1528872009.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:10.050Z,1528872010.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:40:10.051Z,1528872010.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:10.453Z,1528872010.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:40:10.454Z,1528872010.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:10.856Z,1528872010.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:40:10.858Z,1528872010.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:11.254Z,1528872011.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:40:11.255Z,1528872011.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:11.650Z,1528872011.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:40:11.651Z,1528872011.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:12.056Z,1528872012.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:40:12.057Z,1528872012.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:12.454Z,1528872012.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:40:12.455Z,1528872012.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:12.856Z,1528872012.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:40:12.857Z,1528872012.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:13.259Z,1528872013.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:40:13.260Z,1528872013.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:13.652Z,1528872013.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:40:13.653Z,1528872013.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:14.053Z,1528872014.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:40:14.054Z,1528872014.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:14.460Z,1528872014.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:40:14.461Z,1528872014.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:14.854Z,1528872014.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:40:14.855Z,1528872014.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:15.252Z,1528872015.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:40:15.254Z,1528872015.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:15.652Z,1528872015.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:40:15.653Z,1528872015.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:16.050Z,1528872016.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:40:16.051Z,1528872016.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:16.454Z,1528872016.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:40:16.455Z,1528872016.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:16.853Z,1528872016.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:40:16.854Z,1528872016.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:17.257Z,1528872017.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:40:17.258Z,1528872017.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:17.652Z,1528872017.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:40:17.654Z,1528872017.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:18.060Z,1528872018.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:40:18.061Z,1528872018.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:18.441Z,1528872018.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:40:18.442Z,1528872018.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:18.857Z,1528872018.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:19.236Z,1528872019.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:19.659Z,1528872019.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:20.068Z,1528872020.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:20.470Z,1528872020.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:20.833Z,1528872020.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:21.238Z,1528872021.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:21.641Z,1528872021.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:22.037Z,1528872022.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:22.440Z,1528872022.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:22.868Z,1528872022.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:23.252Z,1528872023.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:23.648Z,1528872023.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:24.042Z,1528872024.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:24.440Z,1528872024.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:24.842Z,1528872024.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:25.241Z,1528872025.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:25.647Z,1528872025.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:26.079Z,1528872026.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:26.456Z,1528872026.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:29.551Z,1528872029.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:29.555Z,1528872029.555 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T06:35:29.2Z
2018-06-13T06:40:29.555Z,1528872029.555 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T06:40:29.555Z,1528872029.555 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T06:40:29.712Z,1528872029.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:30.849Z,1528872030.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:31.011Z,1528872031.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:31.396Z,1528872031.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:31.786Z,1528872031.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:34.939Z,1528872034.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:35.038Z,1528872035.038 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0076.lzma
2018-06-13T06:40:35.111Z,1528872035.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:35.508Z,1528872035.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:35.838Z,1528872035.838 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0076.lzma.bak
2018-06-13T06:40:35.838Z,1528872035.838 [DataOverHttps](INFO): SBD MOMSN=8328750
2018-06-13T06:40:35.915Z,1528872035.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:37.800Z,1528872037.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:37.946Z,1528872037.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:38.349Z,1528872038.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:41.467Z,1528872041.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:41.624Z,1528872041.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:42.047Z,1528872042.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:42.452Z,1528872042.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:42.851Z,1528872042.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:43.227Z,1528872043.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:43.628Z,1528872043.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:44.028Z,1528872044.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:44.424Z,1528872044.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:47.561Z,1528872047.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:47.657Z,1528872047.657 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0077.lzma
2018-06-13T06:40:47.750Z,1528872047.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:48.117Z,1528872048.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:48.458Z,1528872048.458 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0077.lzma.bak
2018-06-13T06:40:48.458Z,1528872048.458 [DataOverHttps](INFO): SBD MOMSN=8328752
2018-06-13T06:40:48.521Z,1528872048.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:50.409Z,1528872050.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:50.412Z,1528872050.412 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T06:40:50.412Z,1528872050.412 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T06:40:50.412Z,1528872050.412 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T06:40:50.567Z,1528872050.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:50.968Z,1528872050.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:54.102Z,1528872054.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:54.281Z,1528872054.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:54.662Z,1528872054.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:55.058Z,1528872055.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:55.444Z,1528872055.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:55.871Z,1528872055.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:56.271Z,1528872056.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:56.671Z,1528872056.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:57.044Z,1528872057.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:57.441Z,1528872057.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:57.846Z,1528872057.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:58.248Z,1528872058.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:58.652Z,1528872058.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:59.051Z,1528872059.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:59.455Z,1528872059.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:40:59.839Z,1528872059.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:00.246Z,1528872060.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:00.644Z,1528872060.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:01.046Z,1528872061.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:01.453Z,1528872061.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:01.855Z,1528872061.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:02.252Z,1528872062.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:02.651Z,1528872062.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:03.049Z,1528872063.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:03.440Z,1528872063.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:03.854Z,1528872063.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:04.248Z,1528872064.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:04.652Z,1528872064.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:05.055Z,1528872065.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:05.451Z,1528872065.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:05.840Z,1528872065.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:06.258Z,1528872066.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:06.702Z,1528872066.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:07.041Z,1528872067.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:07.478Z,1528872067.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:07.888Z,1528872067.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:08.263Z,1528872068.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:08.648Z,1528872068.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:09.047Z,1528872069.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:09.439Z,1528872069.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:09.846Z,1528872069.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:10.248Z,1528872070.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:10.649Z,1528872070.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:11.055Z,1528872071.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:11.455Z,1528872071.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:11.841Z,1528872071.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:12.246Z,1528872072.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:12.649Z,1528872072.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:13.044Z,1528872073.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:13.448Z,1528872073.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:13.856Z,1528872073.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:14.247Z,1528872074.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:14.652Z,1528872074.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:15.047Z,1528872075.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:15.441Z,1528872075.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:15.846Z,1528872075.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:16.248Z,1528872076.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:16.599Z,1528872076.599 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T06:41:16.599Z,1528872076.599 [NAL9602] Data Fault, FailCount= 3
2018-06-13T06:41:16.599Z,1528872076.599 [NAL9602](ERROR): Data Fault
2018-06-13T06:41:16.652Z,1528872076.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:16.745Z,1528872076.745 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T06:41:17.002Z,1528872077.002 [NAL9602](INFO): Powering down
2018-06-13T06:41:17.050Z,1528872077.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:17.448Z,1528872077.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:17.839Z,1528872077.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:17.917Z,1528872077.917 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T06:41:17.917Z,1528872077.917 [NAL9602] No Fault, FailCount= 3
2018-06-13T06:41:18.247Z,1528872078.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:18.643Z,1528872078.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:19.039Z,1528872079.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:19.456Z,1528872079.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:19.843Z,1528872079.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:20.244Z,1528872080.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:20.643Z,1528872080.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:21.043Z,1528872081.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:21.443Z,1528872081.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:21.848Z,1528872081.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:22.245Z,1528872082.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:22.640Z,1528872082.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:23.043Z,1528872083.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:23.440Z,1528872083.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:23.848Z,1528872083.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:24.244Z,1528872084.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:24.643Z,1528872084.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:25.043Z,1528872085.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:25.443Z,1528872085.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:25.842Z,1528872085.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:26.245Z,1528872086.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:26.646Z,1528872086.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:27.043Z,1528872087.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:27.441Z,1528872087.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:27.844Z,1528872087.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:28.242Z,1528872088.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:28.641Z,1528872088.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:29.052Z,1528872089.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:29.443Z,1528872089.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:29.849Z,1528872089.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:30.256Z,1528872090.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:30.651Z,1528872090.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:31.052Z,1528872091.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:31.445Z,1528872091.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:31.856Z,1528872091.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:32.251Z,1528872092.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:32.657Z,1528872092.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:33.053Z,1528872093.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:33.449Z,1528872093.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:33.857Z,1528872093.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:34.251Z,1528872094.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:34.640Z,1528872094.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:35.054Z,1528872095.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:35.432Z,1528872095.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:35.841Z,1528872095.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:36.258Z,1528872096.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:36.632Z,1528872096.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:37.032Z,1528872097.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:37.458Z,1528872097.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:37.832Z,1528872097.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:38.260Z,1528872098.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:38.660Z,1528872098.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:39.032Z,1528872099.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:39.460Z,1528872099.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:39.860Z,1528872099.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:40.240Z,1528872100.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:40.636Z,1528872100.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:41.044Z,1528872101.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:41.436Z,1528872101.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:41.844Z,1528872101.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:42.244Z,1528872102.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:42.635Z,1528872102.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:43.040Z,1528872103.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:43.440Z,1528872103.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:43.840Z,1528872103.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:44.242Z,1528872104.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:44.644Z,1528872104.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:45.035Z,1528872105.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:45.448Z,1528872105.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:45.843Z,1528872105.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:46.238Z,1528872106.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:46.643Z,1528872106.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:47.010Z,1528872107.010 [NAL9602](INFO): Powering up NAL9602
2018-06-13T06:41:47.048Z,1528872107.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:47.438Z,1528872107.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:47.843Z,1528872107.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:48.248Z,1528872108.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:48.643Z,1528872108.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:49.043Z,1528872109.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:49.443Z,1528872109.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:49.837Z,1528872109.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:50.245Z,1528872110.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:50.643Z,1528872110.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:51.039Z,1528872111.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:54.170Z,1528872114.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:54.331Z,1528872114.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:54.700Z,1528872114.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:55.103Z,1528872115.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:55.499Z,1528872115.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:55.895Z,1528872115.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:56.304Z,1528872116.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:56.699Z,1528872116.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:57.095Z,1528872117.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:57.524Z,1528872117.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:57.865Z,1528872117.865 [NAL9602](INFO): NAL9602 initialized
2018-06-13T06:41:57.900Z,1528872117.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:58.301Z,1528872118.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:58.727Z,1528872118.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:59.130Z,1528872119.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:59.511Z,1528872119.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:41:59.904Z,1528872119.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:00.299Z,1528872120.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:00.711Z,1528872120.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:01.133Z,1528872121.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:01.507Z,1528872121.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:01.902Z,1528872121.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:02.302Z,1528872122.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:02.711Z,1528872122.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:03.132Z,1528872123.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:03.511Z,1528872123.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:03.903Z,1528872123.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:04.303Z,1528872124.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:04.711Z,1528872124.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:05.108Z,1528872125.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:05.510Z,1528872125.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:05.912Z,1528872125.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:06.306Z,1528872126.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:06.711Z,1528872126.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:07.109Z,1528872127.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:07.508Z,1528872127.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:07.906Z,1528872127.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:08.300Z,1528872128.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:08.712Z,1528872128.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:09.112Z,1528872129.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:09.509Z,1528872129.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:09.905Z,1528872129.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:10.314Z,1528872130.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:10.709Z,1528872130.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:11.111Z,1528872131.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:11.508Z,1528872131.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:11.900Z,1528872131.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:12.304Z,1528872132.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:12.711Z,1528872132.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:13.108Z,1528872133.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:13.508Z,1528872133.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:13.907Z,1528872133.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:14.304Z,1528872134.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:14.709Z,1528872134.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:15.111Z,1528872135.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:15.510Z,1528872135.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:15.908Z,1528872135.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:16.310Z,1528872136.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:16.714Z,1528872136.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:17.116Z,1528872137.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:17.516Z,1528872137.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:17.902Z,1528872137.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:18.304Z,1528872138.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:18.713Z,1528872138.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:19.116Z,1528872139.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:19.515Z,1528872139.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:19.907Z,1528872139.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:20.302Z,1528872140.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:20.716Z,1528872140.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:21.115Z,1528872141.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:21.514Z,1528872141.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:21.903Z,1528872141.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:22.317Z,1528872142.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:22.713Z,1528872142.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:23.117Z,1528872143.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:23.513Z,1528872143.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:23.909Z,1528872143.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:24.306Z,1528872144.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:24.706Z,1528872144.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:25.113Z,1528872145.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:25.517Z,1528872145.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:25.913Z,1528872145.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:26.306Z,1528872146.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:26.706Z,1528872146.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:27.107Z,1528872147.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:27.505Z,1528872147.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:27.927Z,1528872147.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:28.324Z,1528872148.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:28.715Z,1528872148.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:29.114Z,1528872149.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:29.513Z,1528872149.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:29.893Z,1528872149.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:30.318Z,1528872150.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:30.713Z,1528872150.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:31.115Z,1528872151.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:31.523Z,1528872151.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:31.926Z,1528872151.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:32.299Z,1528872152.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:32.700Z,1528872152.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:33.124Z,1528872153.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:33.495Z,1528872153.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:33.927Z,1528872153.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:34.323Z,1528872154.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:34.711Z,1528872154.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:35.099Z,1528872155.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:35.500Z,1528872155.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:35.900Z,1528872155.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:36.304Z,1528872156.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:36.700Z,1528872156.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:37.106Z,1528872157.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:37.511Z,1528872157.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:37.908Z,1528872157.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:38.299Z,1528872158.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:38.702Z,1528872158.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:39.102Z,1528872159.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:39.499Z,1528872159.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:39.912Z,1528872159.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:40.311Z,1528872160.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:40.712Z,1528872160.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:41.101Z,1528872161.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:41.508Z,1528872161.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:41.899Z,1528872161.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:42.302Z,1528872162.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:42.703Z,1528872162.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:43.112Z,1528872163.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:43.511Z,1528872163.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:43.907Z,1528872163.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:44.300Z,1528872164.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:44.703Z,1528872164.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:45.106Z,1528872165.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:45.501Z,1528872165.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:45.915Z,1528872165.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:46.311Z,1528872166.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:46.713Z,1528872166.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:47.102Z,1528872167.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:47.516Z,1528872167.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:47.900Z,1528872167.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:48.303Z,1528872168.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:48.703Z,1528872168.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:49.112Z,1528872169.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:49.516Z,1528872169.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:49.908Z,1528872169.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:50.300Z,1528872170.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:50.703Z,1528872170.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:51.105Z,1528872171.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:54.233Z,1528872174.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:54.408Z,1528872174.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:54.793Z,1528872174.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:55.196Z,1528872175.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:55.570Z,1528872175.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:55.970Z,1528872175.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:56.372Z,1528872176.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:56.796Z,1528872176.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:57.196Z,1528872177.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:57.580Z,1528872177.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:57.972Z,1528872177.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:58.371Z,1528872178.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:58.775Z,1528872178.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:59.200Z,1528872179.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:59.600Z,1528872179.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:59.972Z,1528872179.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:59.972Z,1528872179.972 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66
2018-06-13T06:42:59.972Z,1528872179.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:42:59.974Z,1528872179.974 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:59.974Z,1528872179.974 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66
2018-06-13T06:42:59.974Z,1528872179.974 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:42:59.976Z,1528872179.976 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:42:59.976Z,1528872179.976 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 66
2018-06-13T06:42:59.976Z,1528872179.976 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:43:00.065Z,1528872180.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:43:00.066Z,1528872180.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:43:00.066Z,1528872180.066 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:43:00.449Z,1528872180.449 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:43:00.449Z,1528872180.449 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66
2018-06-13T06:43:00.450Z,1528872180.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:43:00.450Z,1528872180.450 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66
2018-06-13T06:43:00.450Z,1528872180.450 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:43:00.450Z,1528872180.450 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 66
2018-06-13T06:43:00.785Z,1528872180.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:43:00.785Z,1528872180.785 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:43:00.786Z,1528872180.786 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:43:00.786Z,1528872180.786 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:43:00.787Z,1528872180.787 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:43:00.787Z,1528872180.787 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:43:00.787Z,1528872180.787 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:43:00.788Z,1528872180.788 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:43:00.788Z,1528872180.788 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:43:01.182Z,1528872181.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:43:01.183Z,1528872181.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:01.581Z,1528872181.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:43:01.582Z,1528872181.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:01.982Z,1528872181.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:43:01.983Z,1528872181.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:02.372Z,1528872182.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:43:02.381Z,1528872182.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:02.786Z,1528872182.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:43:02.787Z,1528872182.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:03.186Z,1528872183.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:43:03.187Z,1528872183.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:03.584Z,1528872183.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:43:03.585Z,1528872183.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:03.960Z,1528872183.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:43:03.974Z,1528872183.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:04.364Z,1528872184.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:43:04.385Z,1528872184.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:04.787Z,1528872184.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:43:04.788Z,1528872184.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:05.195Z,1528872185.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:43:05.196Z,1528872185.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:05.596Z,1528872185.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:43:05.597Z,1528872185.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:05.965Z,1528872185.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:43:05.966Z,1528872185.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:06.367Z,1528872186.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:43:06.368Z,1528872186.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:06.794Z,1528872186.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:43:06.795Z,1528872186.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:07.183Z,1528872187.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:43:07.184Z,1528872187.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:07.603Z,1528872187.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:43:07.605Z,1528872187.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:07.976Z,1528872187.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:43:07.997Z,1528872187.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:08.366Z,1528872188.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:43:08.367Z,1528872188.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:08.778Z,1528872188.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:43:08.779Z,1528872188.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:09.179Z,1528872189.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:43:09.180Z,1528872189.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:09.574Z,1528872189.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:43:09.575Z,1528872189.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:09.976Z,1528872189.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:43:09.977Z,1528872189.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:10.369Z,1528872190.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:43:10.370Z,1528872190.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:10.775Z,1528872190.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:43:10.775Z,1528872190.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:11.178Z,1528872191.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:43:11.179Z,1528872191.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:11.575Z,1528872191.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:43:11.576Z,1528872191.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:11.968Z,1528872191.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:43:11.969Z,1528872191.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:12.369Z,1528872192.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:43:12.370Z,1528872192.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:12.770Z,1528872192.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:43:12.771Z,1528872192.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:13.175Z,1528872193.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:43:13.175Z,1528872193.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:13.578Z,1528872193.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:43:13.579Z,1528872193.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:13.976Z,1528872193.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:43:13.977Z,1528872193.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:14.367Z,1528872194.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:43:14.368Z,1528872194.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:14.771Z,1528872194.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:43:14.772Z,1528872194.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:15.169Z,1528872195.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:43:15.170Z,1528872195.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:15.567Z,1528872195.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:43:15.568Z,1528872195.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:15.976Z,1528872195.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:43:15.976Z,1528872195.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:16.379Z,1528872196.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:43:16.380Z,1528872196.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:16.774Z,1528872196.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:43:16.775Z,1528872196.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:17.169Z,1528872197.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:43:17.170Z,1528872197.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:17.576Z,1528872197.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:43:17.577Z,1528872197.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:17.967Z,1528872197.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:43:17.968Z,1528872197.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:18.369Z,1528872198.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:43:18.370Z,1528872198.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:18.770Z,1528872198.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:43:18.771Z,1528872198.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:19.174Z,1528872199.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:43:19.175Z,1528872199.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:19.578Z,1528872199.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:43:19.579Z,1528872199.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:19.979Z,1528872199.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:20.367Z,1528872200.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:20.772Z,1528872200.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:21.174Z,1528872201.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:21.567Z,1528872201.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:21.984Z,1528872201.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:22.384Z,1528872202.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:22.781Z,1528872202.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:23.172Z,1528872203.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:23.575Z,1528872203.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:23.967Z,1528872203.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:24.373Z,1528872204.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:24.774Z,1528872204.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:25.180Z,1528872205.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:25.584Z,1528872205.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:25.984Z,1528872205.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:26.369Z,1528872206.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:26.772Z,1528872206.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:27.175Z,1528872207.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:27.567Z,1528872207.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:27.981Z,1528872207.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:28.380Z,1528872208.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:28.780Z,1528872208.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:29.182Z,1528872209.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:29.574Z,1528872209.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:29.967Z,1528872209.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:30.372Z,1528872210.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:30.780Z,1528872210.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:31.181Z,1528872211.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:31.584Z,1528872211.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:31.981Z,1528872211.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:32.382Z,1528872212.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:32.783Z,1528872212.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:33.182Z,1528872213.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:33.570Z,1528872213.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:33.986Z,1528872213.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:34.388Z,1528872214.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:34.782Z,1528872214.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:35.181Z,1528872215.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:35.573Z,1528872215.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:35.977Z,1528872215.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:36.383Z,1528872216.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:36.783Z,1528872216.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:37.184Z,1528872217.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:37.586Z,1528872217.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:37.988Z,1528872217.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:38.376Z,1528872218.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:38.786Z,1528872218.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:39.191Z,1528872219.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:39.564Z,1528872219.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:39.991Z,1528872219.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:40.388Z,1528872220.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:40.795Z,1528872220.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:41.169Z,1528872221.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:41.568Z,1528872221.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:41.968Z,1528872221.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:42.369Z,1528872222.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:42.767Z,1528872222.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:43.191Z,1528872223.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:43.600Z,1528872223.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:43.998Z,1528872223.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:44.363Z,1528872224.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:44.772Z,1528872224.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:45.167Z,1528872225.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:45.567Z,1528872225.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:45.979Z,1528872225.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:46.379Z,1528872226.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:46.779Z,1528872226.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:47.170Z,1528872227.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:47.569Z,1528872227.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:47.970Z,1528872227.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:48.369Z,1528872228.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:48.770Z,1528872228.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:49.179Z,1528872229.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:49.579Z,1528872229.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:49.980Z,1528872229.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:50.371Z,1528872230.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:50.771Z,1528872230.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:51.169Z,1528872231.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:54.278Z,1528872234.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:54.460Z,1528872234.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:54.853Z,1528872234.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:55.256Z,1528872235.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:55.632Z,1528872235.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:56.028Z,1528872236.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:56.428Z,1528872236.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:56.830Z,1528872236.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:57.253Z,1528872237.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:57.650Z,1528872237.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:58.056Z,1528872238.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:58.428Z,1528872238.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:58.828Z,1528872238.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:59.232Z,1528872239.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:43:59.627Z,1528872239.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:00.054Z,1528872240.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:00.452Z,1528872240.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:00.853Z,1528872240.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:01.228Z,1528872241.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:01.628Z,1528872241.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:02.027Z,1528872242.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:02.429Z,1528872242.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:02.827Z,1528872242.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:03.253Z,1528872243.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:03.654Z,1528872243.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:04.052Z,1528872244.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:04.429Z,1528872244.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:04.828Z,1528872244.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:05.228Z,1528872245.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:05.628Z,1528872245.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:06.053Z,1528872246.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:06.453Z,1528872246.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:06.854Z,1528872246.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:07.228Z,1528872247.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:07.628Z,1528872247.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:08.028Z,1528872248.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:08.428Z,1528872248.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:08.827Z,1528872248.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:09.262Z,1528872249.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:09.650Z,1528872249.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:10.055Z,1528872250.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:10.429Z,1528872250.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:10.836Z,1528872250.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:11.233Z,1528872251.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:11.631Z,1528872251.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:12.039Z,1528872252.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:12.439Z,1528872252.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:12.835Z,1528872252.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:13.236Z,1528872253.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:13.630Z,1528872253.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:14.034Z,1528872254.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:14.432Z,1528872254.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:14.831Z,1528872254.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:15.235Z,1528872255.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:15.636Z,1528872255.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:16.036Z,1528872256.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:16.433Z,1528872256.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:16.832Z,1528872256.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:17.230Z,1528872257.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:17.631Z,1528872257.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:18.035Z,1528872258.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:18.439Z,1528872258.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:18.861Z,1528872258.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:19.228Z,1528872259.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:19.630Z,1528872259.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:20.030Z,1528872260.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:20.431Z,1528872260.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:20.830Z,1528872260.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:21.236Z,1528872261.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:21.635Z,1528872261.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:22.035Z,1528872262.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:22.431Z,1528872262.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:22.829Z,1528872262.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:23.232Z,1528872263.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:23.636Z,1528872263.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:24.035Z,1528872264.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:24.439Z,1528872264.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:24.836Z,1528872264.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:25.227Z,1528872265.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:25.631Z,1528872265.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:26.030Z,1528872266.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:26.428Z,1528872266.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:26.832Z,1528872266.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:27.236Z,1528872267.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:27.636Z,1528872267.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:28.035Z,1528872268.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:28.430Z,1528872268.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:28.827Z,1528872268.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:29.230Z,1528872269.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:29.631Z,1528872269.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:30.035Z,1528872270.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:30.439Z,1528872270.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:30.835Z,1528872270.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:31.228Z,1528872271.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:31.629Z,1528872271.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:32.030Z,1528872272.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:32.428Z,1528872272.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:32.829Z,1528872272.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:33.235Z,1528872273.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:33.635Z,1528872273.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:34.035Z,1528872274.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:34.431Z,1528872274.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:34.827Z,1528872274.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:35.232Z,1528872275.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:35.630Z,1528872275.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:36.035Z,1528872276.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:36.439Z,1528872276.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:36.835Z,1528872276.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:37.228Z,1528872277.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:37.629Z,1528872277.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:38.030Z,1528872278.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:38.427Z,1528872278.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:38.829Z,1528872278.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:39.238Z,1528872279.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:39.635Z,1528872279.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:40.035Z,1528872280.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:40.430Z,1528872280.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:40.827Z,1528872280.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:41.230Z,1528872281.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:41.630Z,1528872281.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:42.035Z,1528872282.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:42.439Z,1528872282.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:42.835Z,1528872282.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:43.227Z,1528872283.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:43.636Z,1528872283.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:44.030Z,1528872284.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:44.428Z,1528872284.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:44.830Z,1528872284.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:45.235Z,1528872285.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:45.639Z,1528872285.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:46.036Z,1528872286.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:46.430Z,1528872286.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:46.831Z,1528872286.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:47.230Z,1528872287.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:47.630Z,1528872287.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:48.035Z,1528872288.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:48.438Z,1528872288.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:48.835Z,1528872288.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:49.229Z,1528872289.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:49.630Z,1528872289.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:50.030Z,1528872290.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:50.432Z,1528872290.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:50.832Z,1528872290.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:51.262Z,1528872291.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:54.491Z,1528872294.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:54.672Z,1528872294.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:55.033Z,1528872295.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:55.437Z,1528872295.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:55.840Z,1528872295.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:56.247Z,1528872296.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:56.642Z,1528872296.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:57.047Z,1528872297.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:57.446Z,1528872297.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:57.836Z,1528872297.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:58.239Z,1528872298.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:58.644Z,1528872298.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:59.043Z,1528872299.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:59.447Z,1528872299.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:44:59.847Z,1528872299.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:00.244Z,1528872300.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:00.640Z,1528872300.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:01.039Z,1528872301.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:01.437Z,1528872301.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:01.839Z,1528872301.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:02.247Z,1528872302.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:02.644Z,1528872302.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:03.047Z,1528872303.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:03.441Z,1528872303.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:03.836Z,1528872303.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:04.240Z,1528872304.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:04.639Z,1528872304.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:05.044Z,1528872305.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:05.448Z,1528872305.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:05.847Z,1528872305.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:06.237Z,1528872306.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:06.639Z,1528872306.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:07.040Z,1528872307.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:07.437Z,1528872307.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:07.839Z,1528872307.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:08.247Z,1528872308.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:08.644Z,1528872308.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:09.047Z,1528872309.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:09.440Z,1528872309.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:09.836Z,1528872309.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:10.251Z,1528872310.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:10.651Z,1528872310.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:11.046Z,1528872311.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:11.447Z,1528872311.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:11.848Z,1528872311.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:12.238Z,1528872312.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:12.644Z,1528872312.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:13.049Z,1528872313.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:13.445Z,1528872313.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:13.855Z,1528872313.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:14.252Z,1528872314.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:14.651Z,1528872314.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:15.060Z,1528872315.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:15.443Z,1528872315.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:15.852Z,1528872315.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:16.250Z,1528872316.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:16.656Z,1528872316.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:17.057Z,1528872317.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:17.452Z,1528872317.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:17.872Z,1528872317.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:18.251Z,1528872318.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:18.651Z,1528872318.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:19.054Z,1528872319.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:19.450Z,1528872319.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:19.856Z,1528872319.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:20.269Z,1528872320.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:20.663Z,1528872320.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:21.064Z,1528872321.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:21.437Z,1528872321.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:21.833Z,1528872321.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:22.238Z,1528872322.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:22.640Z,1528872322.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:23.042Z,1528872323.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:23.465Z,1528872323.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:23.864Z,1528872323.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:24.237Z,1528872324.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:24.640Z,1528872324.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:25.044Z,1528872325.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:25.437Z,1528872325.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:25.836Z,1528872325.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:26.270Z,1528872326.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:26.668Z,1528872326.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:27.047Z,1528872327.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:27.454Z,1528872327.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:27.836Z,1528872327.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:28.250Z,1528872328.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:28.644Z,1528872328.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:29.049Z,1528872329.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:29.452Z,1528872329.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:29.848Z,1528872329.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:30.237Z,1528872330.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:30.644Z,1528872330.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:31.047Z,1528872331.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:31.450Z,1528872331.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:31.852Z,1528872331.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:32.246Z,1528872332.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:32.636Z,1528872332.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:33.052Z,1528872333.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:33.449Z,1528872333.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:33.848Z,1528872333.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:34.250Z,1528872334.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:34.640Z,1528872334.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:35.050Z,1528872335.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:35.453Z,1528872335.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:35.853Z,1528872335.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:36.247Z,1528872336.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:36.644Z,1528872336.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:37.053Z,1528872337.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:37.449Z,1528872337.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:37.852Z,1528872337.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:38.242Z,1528872338.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:38.645Z,1528872338.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:39.053Z,1528872339.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:39.453Z,1528872339.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:39.862Z,1528872339.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:40.245Z,1528872340.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:40.648Z,1528872340.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:41.054Z,1528872341.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:41.453Z,1528872341.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:41.854Z,1528872341.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:42.250Z,1528872342.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:42.652Z,1528872342.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:43.068Z,1528872343.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:43.452Z,1528872343.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:43.860Z,1528872343.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:44.231Z,1528872344.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:44.629Z,1528872344.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:45.057Z,1528872345.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:45.457Z,1528872345.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:45.862Z,1528872345.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:46.234Z,1528872346.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:46.634Z,1528872346.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:47.055Z,1528872347.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:47.464Z,1528872347.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:47.866Z,1528872347.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:48.237Z,1528872348.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:48.636Z,1528872348.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:49.063Z,1528872349.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:49.467Z,1528872349.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:49.848Z,1528872349.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:50.242Z,1528872350.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:50.636Z,1528872350.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:50.639Z,1528872350.639 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T06:45:50.640Z,1528872350.640 [Default:CheckIn:C.Wait] Stopped
2018-06-13T06:45:50.640Z,1528872350.640 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T06:45:50.640Z,1528872350.640 [Default:CheckIn:D] Running Loop=1
2018-06-13T06:45:51.051Z,1528872351.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:51.054Z,1528872351.054 [Default:CheckIn:D] Stopped
2018-06-13T06:45:51.054Z,1528872351.054 [Default:CheckIn:E] Running Loop=1
2018-06-13T06:45:51.451Z,1528872351.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:51.455Z,1528872351.455 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 198.626823 min 
2018-06-13T06:45:51.455Z,1528872351.455 [Default:CheckIn:E] Stopped
2018-06-13T06:45:51.455Z,1528872351.455 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T06:45:51.455Z,1528872351.455 [Default:CheckIn] Stopped
2018-06-13T06:45:51.455Z,1528872351.455 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T06:45:51.455Z,1528872351.455 [Default:CheckIn](INFO): Running loop #20
2018-06-13T06:45:51.455Z,1528872351.455 [Default:CheckIn] Running Loop=20
2018-06-13T06:45:51.455Z,1528872351.455 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T06:45:51.456Z,1528872351.456 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T06:45:54.559Z,1528872354.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:54.735Z,1528872354.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:55.104Z,1528872355.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:55.504Z,1528872355.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:55.922Z,1528872355.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:56.331Z,1528872356.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:56.711Z,1528872356.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:57.115Z,1528872357.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:57.506Z,1528872357.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:57.904Z,1528872357.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:58.309Z,1528872358.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:58.707Z,1528872358.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:59.111Z,1528872359.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:59.515Z,1528872359.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:45:59.912Z,1528872359.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:00.304Z,1528872360.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:00.712Z,1528872360.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:01.106Z,1528872361.106 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:01.106Z,1528872361.106 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67
2018-06-13T06:46:01.107Z,1528872361.107 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:46:01.108Z,1528872361.108 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:01.108Z,1528872361.108 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67
2018-06-13T06:46:01.108Z,1528872361.108 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:46:01.111Z,1528872361.111 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:01.111Z,1528872361.111 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 67
2018-06-13T06:46:01.111Z,1528872361.111 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:46:01.193Z,1528872361.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:46:01.193Z,1528872361.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:46:01.194Z,1528872361.194 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:46:01.577Z,1528872361.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:46:01.577Z,1528872361.577 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67
2018-06-13T06:46:01.578Z,1528872361.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:46:01.578Z,1528872361.578 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67
2018-06-13T06:46:01.578Z,1528872361.578 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:46:01.578Z,1528872361.578 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 67
2018-06-13T06:46:01.907Z,1528872361.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:46:01.907Z,1528872361.907 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:46:01.908Z,1528872361.908 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:46:01.908Z,1528872361.908 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:46:01.909Z,1528872361.909 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:46:01.909Z,1528872361.909 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:46:01.910Z,1528872361.910 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:46:01.910Z,1528872361.910 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:46:01.910Z,1528872361.910 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:46:02.327Z,1528872362.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:46:02.328Z,1528872362.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:02.718Z,1528872362.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:46:02.719Z,1528872362.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:03.117Z,1528872363.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:46:03.118Z,1528872363.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:03.520Z,1528872363.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:46:03.521Z,1528872363.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:03.905Z,1528872363.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:46:03.906Z,1528872363.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:04.308Z,1528872364.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:46:04.310Z,1528872364.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:04.708Z,1528872364.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:46:04.710Z,1528872364.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:05.116Z,1528872365.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:46:05.118Z,1528872365.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:05.520Z,1528872365.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:46:05.522Z,1528872365.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:05.916Z,1528872365.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:46:05.917Z,1528872365.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:06.311Z,1528872366.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:46:06.312Z,1528872366.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:06.708Z,1528872366.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:46:06.709Z,1528872366.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:07.109Z,1528872367.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:46:07.110Z,1528872367.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:07.515Z,1528872367.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:46:07.516Z,1528872367.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:07.916Z,1528872367.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:46:07.917Z,1528872367.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:08.321Z,1528872368.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:46:08.322Z,1528872368.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:08.718Z,1528872368.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:46:08.718Z,1528872368.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:09.117Z,1528872369.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:46:09.118Z,1528872369.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:09.515Z,1528872369.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:46:09.516Z,1528872369.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:09.915Z,1528872369.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:46:09.915Z,1528872369.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:10.312Z,1528872370.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:46:10.313Z,1528872370.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:10.710Z,1528872370.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:46:10.711Z,1528872370.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:11.118Z,1528872371.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:46:11.119Z,1528872371.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:11.528Z,1528872371.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:46:11.529Z,1528872371.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:11.917Z,1528872371.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:46:11.918Z,1528872371.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:12.311Z,1528872372.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:46:12.312Z,1528872372.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:12.707Z,1528872372.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:46:12.708Z,1528872372.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:13.116Z,1528872373.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:46:13.117Z,1528872373.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:13.518Z,1528872373.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:46:13.519Z,1528872373.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:13.916Z,1528872373.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:46:13.918Z,1528872373.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:14.311Z,1528872374.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:46:14.312Z,1528872374.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:14.708Z,1528872374.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:46:14.710Z,1528872374.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:15.121Z,1528872375.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:46:15.122Z,1528872375.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:15.527Z,1528872375.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:46:15.528Z,1528872375.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:15.921Z,1528872375.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:46:15.922Z,1528872375.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:16.309Z,1528872376.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:46:16.310Z,1528872376.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:16.707Z,1528872376.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:46:16.708Z,1528872376.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:17.121Z,1528872377.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:46:17.122Z,1528872377.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:17.520Z,1528872377.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:46:17.521Z,1528872377.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:17.916Z,1528872377.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:46:17.917Z,1528872377.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:18.315Z,1528872378.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:46:18.315Z,1528872378.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:18.707Z,1528872378.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:46:18.708Z,1528872378.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:19.118Z,1528872379.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:46:19.119Z,1528872379.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:19.520Z,1528872379.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:46:19.522Z,1528872379.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:19.916Z,1528872379.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:46:19.918Z,1528872379.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:20.313Z,1528872380.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:46:20.314Z,1528872380.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:20.714Z,1528872380.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:46:20.715Z,1528872380.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:21.118Z,1528872381.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:21.520Z,1528872381.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:21.921Z,1528872381.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:22.317Z,1528872382.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:22.715Z,1528872382.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:23.124Z,1528872383.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:23.520Z,1528872383.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:23.924Z,1528872383.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:24.318Z,1528872384.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:24.716Z,1528872384.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:25.121Z,1528872385.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:25.528Z,1528872385.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:25.928Z,1528872385.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:26.321Z,1528872386.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:26.720Z,1528872386.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:27.119Z,1528872387.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:27.532Z,1528872387.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:27.932Z,1528872387.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:28.324Z,1528872388.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:28.717Z,1528872388.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:29.124Z,1528872389.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:29.523Z,1528872389.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:29.928Z,1528872389.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:30.301Z,1528872390.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:30.716Z,1528872390.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:31.130Z,1528872391.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:31.530Z,1528872391.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:31.928Z,1528872391.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:32.306Z,1528872392.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:32.705Z,1528872392.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:33.128Z,1528872393.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:33.527Z,1528872393.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:33.929Z,1528872393.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:34.308Z,1528872394.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:34.704Z,1528872394.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:35.129Z,1528872395.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:35.529Z,1528872395.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:35.930Z,1528872395.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:36.305Z,1528872396.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:36.704Z,1528872396.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:37.131Z,1528872397.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:37.534Z,1528872397.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:37.931Z,1528872397.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:38.305Z,1528872398.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:38.704Z,1528872398.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:39.116Z,1528872399.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:39.533Z,1528872399.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:39.915Z,1528872399.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:40.308Z,1528872400.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:40.709Z,1528872400.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:41.112Z,1528872401.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:41.515Z,1528872401.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:41.911Z,1528872401.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:42.308Z,1528872402.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:42.705Z,1528872402.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:43.112Z,1528872403.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:43.511Z,1528872403.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:43.911Z,1528872403.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:44.311Z,1528872404.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:44.703Z,1528872404.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:45.111Z,1528872405.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:45.515Z,1528872405.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:45.916Z,1528872405.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:46.306Z,1528872406.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:46.708Z,1528872406.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:47.111Z,1528872407.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:47.515Z,1528872407.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:47.912Z,1528872407.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:48.307Z,1528872408.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:48.706Z,1528872408.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:49.107Z,1528872409.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:49.511Z,1528872409.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:49.915Z,1528872409.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:50.312Z,1528872410.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:50.703Z,1528872410.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:51.107Z,1528872411.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:51.507Z,1528872411.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:54.614Z,1528872414.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:54.786Z,1528872414.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:55.188Z,1528872415.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:55.571Z,1528872415.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:55.964Z,1528872415.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:56.367Z,1528872416.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:56.758Z,1528872416.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:57.172Z,1528872417.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:57.571Z,1528872417.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:57.967Z,1528872417.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:58.362Z,1528872418.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:58.763Z,1528872418.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:59.171Z,1528872419.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:59.571Z,1528872419.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:46:59.972Z,1528872419.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:00.360Z,1528872420.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:00.761Z,1528872420.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:01.171Z,1528872421.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:01.571Z,1528872421.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:01.993Z,1528872421.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:02.362Z,1528872422.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:02.760Z,1528872422.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:03.171Z,1528872423.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:03.571Z,1528872423.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:03.967Z,1528872423.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:04.362Z,1528872424.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:04.762Z,1528872424.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:05.167Z,1528872425.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:05.571Z,1528872425.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:05.971Z,1528872425.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:06.360Z,1528872426.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:06.761Z,1528872426.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:07.171Z,1528872427.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:07.566Z,1528872427.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:07.991Z,1528872427.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:08.369Z,1528872428.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:08.777Z,1528872428.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:09.178Z,1528872429.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:09.584Z,1528872429.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:09.980Z,1528872429.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:10.373Z,1528872430.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:10.756Z,1528872430.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:11.183Z,1528872431.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:11.587Z,1528872431.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:11.971Z,1528872431.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:12.363Z,1528872432.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:12.761Z,1528872432.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:13.171Z,1528872433.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:13.568Z,1528872433.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:13.971Z,1528872433.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:14.367Z,1528872434.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:14.759Z,1528872434.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:15.171Z,1528872435.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:15.571Z,1528872435.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:15.968Z,1528872435.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:16.362Z,1528872436.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:16.763Z,1528872436.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:17.169Z,1528872437.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:17.571Z,1528872437.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:17.968Z,1528872437.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:18.366Z,1528872438.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:18.764Z,1528872438.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:19.168Z,1528872439.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:19.573Z,1528872439.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:19.971Z,1528872439.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:20.366Z,1528872440.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:20.760Z,1528872440.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:21.175Z,1528872441.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:21.576Z,1528872441.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:21.973Z,1528872441.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:22.374Z,1528872442.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:22.777Z,1528872442.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:23.177Z,1528872443.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:23.577Z,1528872443.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:23.975Z,1528872443.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:24.367Z,1528872444.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:24.765Z,1528872444.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:25.175Z,1528872445.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:25.574Z,1528872445.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:25.977Z,1528872445.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:26.373Z,1528872446.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:26.770Z,1528872446.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:27.164Z,1528872447.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:27.574Z,1528872447.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:27.975Z,1528872447.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:28.372Z,1528872448.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:28.773Z,1528872448.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:29.168Z,1528872449.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:29.573Z,1528872449.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:29.970Z,1528872449.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:30.379Z,1528872450.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:30.786Z,1528872450.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:31.185Z,1528872451.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:31.561Z,1528872451.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:31.964Z,1528872451.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:32.361Z,1528872452.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:32.757Z,1528872452.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:33.184Z,1528872453.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:33.586Z,1528872453.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:33.985Z,1528872453.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:34.384Z,1528872454.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:34.761Z,1528872454.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:35.155Z,1528872455.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:35.561Z,1528872455.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:35.960Z,1528872455.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:36.367Z,1528872456.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:36.796Z,1528872456.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:37.171Z,1528872457.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:37.563Z,1528872457.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:37.961Z,1528872457.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:38.363Z,1528872458.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:38.760Z,1528872458.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:39.168Z,1528872459.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:39.568Z,1528872459.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:39.967Z,1528872459.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:40.367Z,1528872460.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:40.768Z,1528872460.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:41.159Z,1528872461.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:41.562Z,1528872461.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:41.962Z,1528872461.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:42.367Z,1528872462.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:42.771Z,1528872462.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:43.167Z,1528872463.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:43.559Z,1528872463.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:43.962Z,1528872463.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:44.363Z,1528872464.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:44.760Z,1528872464.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:45.162Z,1528872465.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:45.567Z,1528872465.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:45.971Z,1528872465.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:46.368Z,1528872466.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:46.762Z,1528872466.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:47.164Z,1528872467.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:47.562Z,1528872467.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:47.962Z,1528872467.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:48.367Z,1528872468.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:48.770Z,1528872468.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:49.167Z,1528872469.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:49.559Z,1528872469.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:49.962Z,1528872469.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:50.362Z,1528872470.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:50.760Z,1528872470.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:51.164Z,1528872471.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:51.575Z,1528872471.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:54.705Z,1528872474.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:54.877Z,1528872474.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:55.256Z,1528872475.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:55.642Z,1528872475.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:56.032Z,1528872476.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:56.452Z,1528872476.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:56.852Z,1528872476.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:57.253Z,1528872477.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:57.635Z,1528872477.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:58.032Z,1528872478.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:58.446Z,1528872478.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:58.836Z,1528872478.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:59.243Z,1528872479.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:47:59.662Z,1528872479.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:00.067Z,1528872480.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:00.435Z,1528872480.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:00.836Z,1528872480.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:01.248Z,1528872481.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:01.648Z,1528872481.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:02.072Z,1528872482.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:02.440Z,1528872482.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:02.835Z,1528872482.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:03.252Z,1528872483.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:03.652Z,1528872483.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:04.049Z,1528872484.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:04.444Z,1528872484.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:04.847Z,1528872484.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:05.247Z,1528872485.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:05.648Z,1528872485.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:06.050Z,1528872486.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:06.436Z,1528872486.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:06.848Z,1528872486.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:07.249Z,1528872487.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:07.648Z,1528872487.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:08.049Z,1528872488.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:08.447Z,1528872488.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:08.838Z,1528872488.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:09.253Z,1528872489.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:09.654Z,1528872489.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:10.050Z,1528872490.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:10.451Z,1528872490.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:10.853Z,1528872490.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:11.253Z,1528872491.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:11.655Z,1528872491.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:12.050Z,1528872492.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:12.437Z,1528872492.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:12.857Z,1528872492.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:13.232Z,1528872493.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:13.655Z,1528872493.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:14.059Z,1528872494.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:14.464Z,1528872494.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:14.837Z,1528872494.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:15.236Z,1528872495.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:15.637Z,1528872495.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:16.032Z,1528872496.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:16.460Z,1528872496.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:16.861Z,1528872496.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:17.255Z,1528872497.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:17.637Z,1528872497.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:18.044Z,1528872498.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:18.433Z,1528872498.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:18.836Z,1528872498.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:19.236Z,1528872499.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:19.643Z,1528872499.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:20.064Z,1528872500.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:20.466Z,1528872500.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:20.835Z,1528872500.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:21.235Z,1528872501.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:21.636Z,1528872501.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:22.034Z,1528872502.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:22.460Z,1528872502.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:22.847Z,1528872502.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:23.294Z,1528872503.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:23.635Z,1528872503.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:24.035Z,1528872504.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:24.435Z,1528872504.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:24.840Z,1528872504.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:25.236Z,1528872505.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:25.647Z,1528872505.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:26.046Z,1528872506.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:26.446Z,1528872506.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:26.836Z,1528872506.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:27.236Z,1528872507.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:27.636Z,1528872507.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:28.036Z,1528872508.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:28.447Z,1528872508.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:28.848Z,1528872508.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:29.247Z,1528872509.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:29.637Z,1528872509.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:30.039Z,1528872510.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:30.439Z,1528872510.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:30.844Z,1528872510.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:31.237Z,1528872511.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:31.647Z,1528872511.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:32.044Z,1528872512.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:32.443Z,1528872512.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:32.839Z,1528872512.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:33.244Z,1528872513.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:33.638Z,1528872513.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:34.039Z,1528872514.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:34.443Z,1528872514.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:34.872Z,1528872514.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:35.247Z,1528872515.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:35.637Z,1528872515.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:36.037Z,1528872516.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:36.444Z,1528872516.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:36.839Z,1528872516.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:37.239Z,1528872517.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:37.647Z,1528872517.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:38.047Z,1528872518.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:38.443Z,1528872518.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:38.844Z,1528872518.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:39.238Z,1528872519.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:39.652Z,1528872519.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:40.044Z,1528872520.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:40.448Z,1528872520.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:40.856Z,1528872520.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:41.249Z,1528872521.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:41.640Z,1528872521.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:42.042Z,1528872522.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:42.440Z,1528872522.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:42.840Z,1528872522.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:43.242Z,1528872523.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:43.649Z,1528872523.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:44.052Z,1528872524.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:44.450Z,1528872524.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:44.840Z,1528872524.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:45.240Z,1528872525.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:45.645Z,1528872525.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:46.044Z,1528872526.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:46.448Z,1528872526.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:46.851Z,1528872526.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:47.249Z,1528872527.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:47.639Z,1528872527.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:48.044Z,1528872528.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:48.442Z,1528872528.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:48.844Z,1528872528.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:49.244Z,1528872529.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:49.650Z,1528872529.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:50.052Z,1528872530.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:50.456Z,1528872530.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:50.836Z,1528872530.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:51.243Z,1528872531.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:51.645Z,1528872531.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:54.756Z,1528872534.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:54.948Z,1528872534.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:55.327Z,1528872535.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:55.735Z,1528872535.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:56.104Z,1528872536.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:56.505Z,1528872536.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:56.900Z,1528872536.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:57.329Z,1528872537.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:57.731Z,1528872537.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:58.127Z,1528872538.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:58.510Z,1528872538.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:58.904Z,1528872538.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:59.335Z,1528872539.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:48:59.714Z,1528872539.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:00.115Z,1528872540.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:00.504Z,1528872540.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:00.908Z,1528872540.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:01.307Z,1528872541.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:01.710Z,1528872541.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:02.115Z,1528872542.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:02.115Z,1528872542.115 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68
2018-06-13T06:49:02.115Z,1528872542.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:49:02.116Z,1528872542.116 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:02.117Z,1528872542.117 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68
2018-06-13T06:49:02.117Z,1528872542.117 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:49:02.119Z,1528872542.119 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:02.119Z,1528872542.119 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 68
2018-06-13T06:49:02.119Z,1528872542.119 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:49:02.209Z,1528872542.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:49:02.209Z,1528872542.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:49:02.210Z,1528872542.210 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:49:02.593Z,1528872542.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:49:02.593Z,1528872542.593 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68
2018-06-13T06:49:02.593Z,1528872542.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:49:02.594Z,1528872542.594 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68
2018-06-13T06:49:02.594Z,1528872542.594 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:49:02.594Z,1528872542.594 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 68
2018-06-13T06:49:02.905Z,1528872542.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:49:02.906Z,1528872542.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:49:02.906Z,1528872542.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:49:02.906Z,1528872542.906 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:49:02.907Z,1528872542.907 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:49:02.907Z,1528872542.907 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:49:02.907Z,1528872542.907 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:49:02.908Z,1528872542.908 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:49:02.908Z,1528872542.908 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:49:03.313Z,1528872543.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:49:03.314Z,1528872543.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:03.712Z,1528872543.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:49:03.712Z,1528872543.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:04.114Z,1528872544.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:49:04.115Z,1528872544.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:04.521Z,1528872544.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:49:04.522Z,1528872544.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:04.933Z,1528872544.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:49:04.934Z,1528872544.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:05.323Z,1528872545.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:49:05.324Z,1528872545.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:05.716Z,1528872545.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:49:05.717Z,1528872545.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:06.111Z,1528872546.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:49:06.111Z,1528872546.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:06.508Z,1528872546.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:49:06.510Z,1528872546.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:06.909Z,1528872546.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:49:06.910Z,1528872546.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:07.309Z,1528872547.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:49:07.310Z,1528872547.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:07.718Z,1528872547.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:49:07.719Z,1528872547.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:08.121Z,1528872548.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:49:08.122Z,1528872548.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:08.517Z,1528872548.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:49:08.518Z,1528872548.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:08.913Z,1528872548.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:49:08.914Z,1528872548.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:09.316Z,1528872549.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:49:09.321Z,1528872549.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:09.717Z,1528872549.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T06:49:09.718Z,1528872549.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:10.100Z,1528872550.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T06:49:10.117Z,1528872550.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:10.525Z,1528872550.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T06:49:10.526Z,1528872550.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:10.925Z,1528872550.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T06:49:10.926Z,1528872550.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:11.326Z,1528872551.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T06:49:11.327Z,1528872551.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:11.724Z,1528872551.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T06:49:11.729Z,1528872551.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:12.100Z,1528872552.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T06:49:12.101Z,1528872552.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:12.503Z,1528872552.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T06:49:12.504Z,1528872552.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:12.908Z,1528872552.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:49:12.925Z,1528872552.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:13.303Z,1528872553.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T06:49:13.304Z,1528872553.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:13.731Z,1528872553.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T06:49:13.731Z,1528872553.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:14.114Z,1528872554.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T06:49:14.115Z,1528872554.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:14.511Z,1528872554.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T06:49:14.512Z,1528872554.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:14.903Z,1528872554.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:49:14.904Z,1528872554.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:15.305Z,1528872555.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:49:15.306Z,1528872555.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:15.711Z,1528872555.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T06:49:15.712Z,1528872555.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:16.103Z,1528872556.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T06:49:16.103Z,1528872556.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:16.511Z,1528872556.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T06:49:16.512Z,1528872556.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:16.915Z,1528872556.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T06:49:16.916Z,1528872556.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:17.316Z,1528872557.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:49:17.317Z,1528872557.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:17.704Z,1528872557.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:49:17.706Z,1528872557.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:18.112Z,1528872558.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:49:18.113Z,1528872558.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:18.503Z,1528872558.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:49:18.504Z,1528872558.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:18.905Z,1528872558.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T06:49:18.906Z,1528872558.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:19.312Z,1528872559.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T06:49:19.313Z,1528872559.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:19.710Z,1528872559.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T06:49:19.710Z,1528872559.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:20.114Z,1528872560.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T06:49:20.115Z,1528872560.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:20.511Z,1528872560.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:49:20.512Z,1528872560.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:20.903Z,1528872560.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:49:20.904Z,1528872560.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:21.305Z,1528872561.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:49:21.306Z,1528872561.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:21.705Z,1528872561.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:49:21.706Z,1528872561.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:22.103Z,1528872562.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T06:49:22.104Z,1528872562.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:22.512Z,1528872562.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:22.915Z,1528872562.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:23.311Z,1528872563.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:23.705Z,1528872563.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:24.106Z,1528872564.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:24.503Z,1528872564.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:24.904Z,1528872564.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:25.307Z,1528872565.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:25.711Z,1528872565.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:26.115Z,1528872566.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:26.511Z,1528872566.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:26.906Z,1528872566.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:27.306Z,1528872567.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:27.706Z,1528872567.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:28.103Z,1528872568.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:28.511Z,1528872568.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:28.915Z,1528872568.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:29.316Z,1528872569.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:29.706Z,1528872569.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:30.106Z,1528872570.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:30.504Z,1528872570.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:30.908Z,1528872570.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:31.306Z,1528872571.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:31.711Z,1528872571.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:32.120Z,1528872572.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:32.519Z,1528872572.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:32.906Z,1528872572.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:33.308Z,1528872573.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:33.720Z,1528872573.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:34.106Z,1528872574.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:34.516Z,1528872574.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:34.916Z,1528872574.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:35.313Z,1528872575.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:35.708Z,1528872575.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:36.110Z,1528872576.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:36.504Z,1528872576.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:36.918Z,1528872576.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:37.306Z,1528872577.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:37.717Z,1528872577.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:38.121Z,1528872578.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:38.516Z,1528872578.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:38.904Z,1528872578.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:39.306Z,1528872579.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:39.707Z,1528872579.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:40.103Z,1528872580.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:40.520Z,1528872580.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:40.924Z,1528872580.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:41.316Z,1528872581.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:41.708Z,1528872581.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:42.107Z,1528872582.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:42.504Z,1528872582.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:42.906Z,1528872582.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:43.321Z,1528872583.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:43.721Z,1528872583.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:44.121Z,1528872584.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:44.518Z,1528872584.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:44.913Z,1528872584.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:45.309Z,1528872585.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:45.713Z,1528872585.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:46.109Z,1528872586.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:46.518Z,1528872586.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:46.922Z,1528872586.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:47.318Z,1528872587.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:47.708Z,1528872587.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:48.108Z,1528872588.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:48.509Z,1528872588.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:48.917Z,1528872588.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:49.300Z,1528872589.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:49.727Z,1528872589.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:50.130Z,1528872590.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:50.516Z,1528872590.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:50.903Z,1528872590.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:51.312Z,1528872591.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:51.708Z,1528872591.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:52.107Z,1528872592.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:52.516Z,1528872592.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:52.919Z,1528872592.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:56.039Z,1528872596.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:56.195Z,1528872596.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:56.569Z,1528872596.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:56.968Z,1528872596.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:57.372Z,1528872597.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:57.795Z,1528872597.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:58.178Z,1528872598.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:58.576Z,1528872598.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:58.970Z,1528872598.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:59.368Z,1528872599.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:49:59.770Z,1528872599.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:00.170Z,1528872600.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:00.576Z,1528872600.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:00.979Z,1528872600.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:01.379Z,1528872601.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:01.767Z,1528872601.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:02.170Z,1528872602.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:02.570Z,1528872602.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:02.968Z,1528872602.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:03.370Z,1528872603.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:03.776Z,1528872603.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:04.175Z,1528872604.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:04.575Z,1528872604.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:04.976Z,1528872604.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:05.367Z,1528872605.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:05.770Z,1528872605.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:06.174Z,1528872606.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:06.575Z,1528872606.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:06.979Z,1528872606.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:07.375Z,1528872607.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:07.770Z,1528872607.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:08.170Z,1528872608.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:08.576Z,1528872608.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:08.968Z,1528872608.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:09.369Z,1528872609.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:09.776Z,1528872609.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:10.175Z,1528872610.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:10.575Z,1528872610.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:10.971Z,1528872610.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:11.368Z,1528872611.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:11.772Z,1528872611.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:12.170Z,1528872612.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:12.576Z,1528872612.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:12.980Z,1528872612.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:13.376Z,1528872613.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:13.768Z,1528872613.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:14.171Z,1528872614.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:14.574Z,1528872614.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:14.969Z,1528872614.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:15.372Z,1528872615.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:15.783Z,1528872615.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:16.176Z,1528872616.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:16.577Z,1528872616.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:16.982Z,1528872616.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:17.368Z,1528872617.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:17.780Z,1528872617.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:18.183Z,1528872618.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:18.577Z,1528872618.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:18.979Z,1528872618.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:19.376Z,1528872619.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:19.768Z,1528872619.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:20.174Z,1528872620.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:20.576Z,1528872620.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:20.968Z,1528872620.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:21.378Z,1528872621.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:21.782Z,1528872621.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:22.182Z,1528872622.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:22.585Z,1528872622.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:22.986Z,1528872622.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:23.377Z,1528872623.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:23.773Z,1528872623.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:24.174Z,1528872624.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:24.582Z,1528872624.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:24.985Z,1528872624.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:25.388Z,1528872625.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:25.769Z,1528872625.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:26.172Z,1528872626.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:26.573Z,1528872626.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:26.978Z,1528872626.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:27.374Z,1528872627.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:27.781Z,1528872627.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:28.182Z,1528872628.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:28.589Z,1528872628.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:28.974Z,1528872628.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:29.375Z,1528872629.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:29.774Z,1528872629.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:30.175Z,1528872630.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:30.582Z,1528872630.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:30.992Z,1528872630.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:31.382Z,1528872631.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:31.779Z,1528872631.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:32.173Z,1528872632.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:32.574Z,1528872632.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:32.974Z,1528872632.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:33.372Z,1528872633.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:33.781Z,1528872633.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:34.183Z,1528872634.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:34.580Z,1528872634.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:34.981Z,1528872634.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:35.373Z,1528872635.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:35.784Z,1528872635.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:36.160Z,1528872636.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:36.587Z,1528872636.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:36.999Z,1528872636.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:37.396Z,1528872637.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:37.768Z,1528872637.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:38.172Z,1528872638.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:38.567Z,1528872638.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:38.969Z,1528872638.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:39.367Z,1528872639.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:39.799Z,1528872639.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:40.195Z,1528872640.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:40.579Z,1528872640.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:40.972Z,1528872640.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:41.368Z,1528872641.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:41.773Z,1528872641.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:42.167Z,1528872642.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:42.579Z,1528872642.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:42.979Z,1528872642.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:43.380Z,1528872643.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:43.772Z,1528872643.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:44.176Z,1528872644.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:44.570Z,1528872644.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:44.971Z,1528872644.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:45.376Z,1528872645.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:45.776Z,1528872645.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:46.179Z,1528872646.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:46.583Z,1528872646.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:46.970Z,1528872646.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:47.371Z,1528872647.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:47.770Z,1528872647.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:48.170Z,1528872648.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:48.584Z,1528872648.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:48.978Z,1528872648.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:49.375Z,1528872649.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:49.771Z,1528872649.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:50.169Z,1528872650.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:50.570Z,1528872650.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:50.971Z,1528872650.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:51.373Z,1528872651.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:51.783Z,1528872651.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:51.807Z,1528872651.807 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T06:45:51.5Z
2018-06-13T06:50:51.807Z,1528872651.807 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T06:50:51.807Z,1528872651.807 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T06:50:54.913Z,1528872654.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:55.936Z,1528872655.936 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0080.lzma
2018-06-13T06:50:55.988Z,1528872655.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:56.140Z,1528872656.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:56.490Z,1528872656.490 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0080.lzma.bak
2018-06-13T06:50:56.490Z,1528872656.490 [DataOverHttps](INFO): SBD MOMSN=8328764
2018-06-13T06:50:56.570Z,1528872656.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:58.416Z,1528872658.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:50:58.567Z,1528872658.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:01.722Z,1528872661.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:01.912Z,1528872661.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:02.269Z,1528872662.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:02.674Z,1528872662.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:03.065Z,1528872663.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:03.472Z,1528872663.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:06.580Z,1528872666.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:06.669Z,1528872666.669 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0081.lzma
2018-06-13T06:51:06.767Z,1528872666.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:07.125Z,1528872667.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:07.470Z,1528872667.470 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0081.lzma.bak
2018-06-13T06:51:07.470Z,1528872667.470 [DataOverHttps](INFO): SBD MOMSN=8328766
2018-06-13T06:51:07.535Z,1528872667.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:09.400Z,1528872669.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:09.419Z,1528872669.419 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T06:51:09.419Z,1528872669.419 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T06:51:09.419Z,1528872669.419 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T06:51:09.576Z,1528872669.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:12.727Z,1528872672.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:12.919Z,1528872672.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:13.300Z,1528872673.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:13.675Z,1528872673.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:14.076Z,1528872674.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:14.478Z,1528872674.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:14.888Z,1528872674.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:15.297Z,1528872675.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:15.687Z,1528872675.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:16.083Z,1528872676.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:16.456Z,1528872676.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:16.890Z,1528872676.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:17.260Z,1528872677.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:17.687Z,1528872677.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:18.091Z,1528872678.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:18.476Z,1528872678.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:18.862Z,1528872678.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:19.261Z,1528872679.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:19.663Z,1528872679.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:20.066Z,1528872680.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:20.468Z,1528872680.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:20.871Z,1528872680.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:21.272Z,1528872681.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:21.672Z,1528872681.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:22.063Z,1528872682.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:22.461Z,1528872682.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:22.862Z,1528872682.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:23.262Z,1528872683.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:23.667Z,1528872683.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:24.110Z,1528872684.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:24.479Z,1528872684.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:24.864Z,1528872684.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:25.264Z,1528872685.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:25.668Z,1528872685.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:26.065Z,1528872686.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:26.505Z,1528872686.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:26.879Z,1528872686.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:27.276Z,1528872687.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:27.678Z,1528872687.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:28.066Z,1528872688.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:28.465Z,1528872688.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:28.866Z,1528872688.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:29.268Z,1528872689.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:29.674Z,1528872689.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:30.077Z,1528872690.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:30.479Z,1528872690.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:30.866Z,1528872690.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:31.265Z,1528872691.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:31.723Z,1528872691.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:32.109Z,1528872692.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:32.527Z,1528872692.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:32.880Z,1528872692.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:33.447Z,1528872693.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:33.692Z,1528872693.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:34.072Z,1528872694.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:34.471Z,1528872694.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:34.869Z,1528872694.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:35.273Z,1528872695.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:35.676Z,1528872695.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:36.077Z,1528872696.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:36.481Z,1528872696.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:36.861Z,1528872696.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:37.274Z,1528872697.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:37.680Z,1528872697.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:38.074Z,1528872698.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:38.457Z,1528872698.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:38.886Z,1528872698.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:39.296Z,1528872699.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:39.679Z,1528872699.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:40.064Z,1528872700.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:40.460Z,1528872700.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:40.864Z,1528872700.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:41.262Z,1528872701.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:41.688Z,1528872701.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:42.091Z,1528872702.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:42.471Z,1528872702.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:42.862Z,1528872702.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:43.262Z,1528872703.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:43.664Z,1528872703.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:44.070Z,1528872704.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:44.462Z,1528872704.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:44.871Z,1528872704.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:45.272Z,1528872705.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:45.672Z,1528872705.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:46.064Z,1528872706.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:46.460Z,1528872706.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:46.864Z,1528872706.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:47.264Z,1528872707.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:47.672Z,1528872707.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:48.077Z,1528872708.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:48.480Z,1528872708.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:48.864Z,1528872708.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:49.264Z,1528872709.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:49.664Z,1528872709.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:50.061Z,1528872710.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:50.462Z,1528872710.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:50.880Z,1528872710.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:51.271Z,1528872711.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:51.671Z,1528872711.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:52.063Z,1528872712.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:52.460Z,1528872712.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:52.864Z,1528872712.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:53.267Z,1528872713.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:53.676Z,1528872713.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:54.076Z,1528872714.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:54.472Z,1528872714.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:54.860Z,1528872714.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:55.262Z,1528872715.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:55.668Z,1528872715.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:56.059Z,1528872716.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:56.462Z,1528872716.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:56.880Z,1528872716.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:57.272Z,1528872717.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:57.680Z,1528872717.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:58.068Z,1528872718.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:58.465Z,1528872718.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:58.873Z,1528872718.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:59.268Z,1528872719.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:59.622Z,1528872719.622 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T06:51:59.623Z,1528872719.623 [NAL9602] Data Fault, FailCount= 4
2018-06-13T06:51:59.623Z,1528872719.623 [NAL9602](ERROR): Data Fault
2018-06-13T06:51:59.676Z,1528872719.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:51:59.753Z,1528872719.753 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T06:52:00.022Z,1528872720.022 [NAL9602](INFO): Powering down
2018-06-13T06:52:00.079Z,1528872720.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:00.472Z,1528872720.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:00.864Z,1528872720.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:00.950Z,1528872720.950 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T06:52:00.950Z,1528872720.950 [NAL9602] No Fault, FailCount= 4
2018-06-13T06:52:01.264Z,1528872721.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:01.665Z,1528872721.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:02.064Z,1528872722.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:02.472Z,1528872722.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:02.868Z,1528872722.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:03.264Z,1528872723.264 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:03.264Z,1528872723.264 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69
2018-06-13T06:52:03.264Z,1528872723.264 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:52:03.266Z,1528872723.266 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:03.266Z,1528872723.266 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69
2018-06-13T06:52:03.266Z,1528872723.266 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:52:03.268Z,1528872723.268 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:03.268Z,1528872723.268 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 69
2018-06-13T06:52:03.268Z,1528872723.268 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:52:03.345Z,1528872723.345 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:52:03.345Z,1528872723.345 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:52:03.346Z,1528872723.346 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:52:03.745Z,1528872723.745 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:52:03.745Z,1528872723.745 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69
2018-06-13T06:52:03.746Z,1528872723.746 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:52:03.746Z,1528872723.746 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69
2018-06-13T06:52:03.746Z,1528872723.746 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:52:03.746Z,1528872723.746 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 69
2018-06-13T06:52:04.076Z,1528872724.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:52:04.076Z,1528872724.076 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:52:04.077Z,1528872724.077 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:52:04.077Z,1528872724.077 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:52:04.078Z,1528872724.078 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:52:04.078Z,1528872724.078 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:52:04.078Z,1528872724.078 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:52:04.079Z,1528872724.079 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:52:04.079Z,1528872724.079 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:52:04.455Z,1528872724.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:52:04.456Z,1528872724.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:04.864Z,1528872724.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:52:04.864Z,1528872724.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:05.260Z,1528872725.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:52:05.261Z,1528872725.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:05.656Z,1528872725.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:52:05.656Z,1528872725.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:06.059Z,1528872726.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:52:06.060Z,1528872726.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:06.459Z,1528872726.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:52:06.459Z,1528872726.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:06.856Z,1528872726.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:52:06.858Z,1528872726.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:07.268Z,1528872727.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:52:07.268Z,1528872727.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:07.659Z,1528872727.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:52:07.660Z,1528872727.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:08.060Z,1528872728.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:52:08.061Z,1528872728.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:08.459Z,1528872728.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:52:08.460Z,1528872728.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:08.863Z,1528872728.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:52:08.864Z,1528872728.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:09.258Z,1528872729.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:52:09.259Z,1528872729.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:09.663Z,1528872729.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:52:09.664Z,1528872729.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:10.063Z,1528872730.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:52:10.064Z,1528872730.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:13.185Z,1528872733.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T06:52:13.186Z,1528872733.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:13.344Z,1528872733.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T06:52:13.344Z,1528872733.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:13.732Z,1528872733.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T06:52:13.734Z,1528872733.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:14.141Z,1528872734.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T06:52:14.142Z,1528872734.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:14.519Z,1528872734.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T06:52:14.520Z,1528872734.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:14.918Z,1528872734.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T06:52:14.919Z,1528872734.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:15.316Z,1528872735.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T06:52:15.317Z,1528872735.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:15.719Z,1528872735.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T06:52:15.720Z,1528872735.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:16.122Z,1528872736.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T06:52:16.123Z,1528872736.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:16.518Z,1528872736.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T06:52:16.519Z,1528872736.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:16.922Z,1528872736.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T06:52:16.923Z,1528872736.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:17.329Z,1528872737.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T06:52:17.330Z,1528872737.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:17.717Z,1528872737.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T06:52:17.718Z,1528872737.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:18.123Z,1528872738.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T06:52:18.124Z,1528872738.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:18.519Z,1528872738.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T06:52:18.520Z,1528872738.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:18.918Z,1528872738.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T06:52:18.919Z,1528872738.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:19.323Z,1528872739.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T06:52:19.324Z,1528872739.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:19.721Z,1528872739.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T06:52:19.722Z,1528872739.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:20.123Z,1528872740.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T06:52:20.123Z,1528872740.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:20.521Z,1528872740.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T06:52:20.522Z,1528872740.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:20.922Z,1528872740.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T06:52:20.923Z,1528872740.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:21.326Z,1528872741.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T06:52:21.327Z,1528872741.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:21.723Z,1528872741.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T06:52:21.724Z,1528872741.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:22.123Z,1528872742.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T06:52:22.123Z,1528872742.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:22.522Z,1528872742.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T06:52:22.523Z,1528872742.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:22.927Z,1528872742.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T06:52:22.928Z,1528872742.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:23.321Z,1528872743.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:23.718Z,1528872743.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:24.136Z,1528872744.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:24.522Z,1528872744.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:24.920Z,1528872744.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:25.324Z,1528872745.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:25.722Z,1528872745.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:26.118Z,1528872746.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:26.522Z,1528872746.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:26.922Z,1528872746.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:27.318Z,1528872747.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:27.723Z,1528872747.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:28.128Z,1528872748.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:28.518Z,1528872748.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:28.918Z,1528872748.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:29.321Z,1528872749.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:29.719Z,1528872749.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:30.082Z,1528872750.082 [NAL9602](INFO): Powering up NAL9602
2018-06-13T06:52:30.128Z,1528872750.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:30.528Z,1528872750.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:30.918Z,1528872750.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:31.328Z,1528872751.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:31.723Z,1528872751.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:32.127Z,1528872752.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:32.524Z,1528872752.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:32.925Z,1528872752.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:33.323Z,1528872753.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:33.724Z,1528872753.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:34.132Z,1528872754.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:34.521Z,1528872754.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:34.923Z,1528872754.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:35.328Z,1528872755.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:35.728Z,1528872755.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:36.124Z,1528872756.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:36.535Z,1528872756.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:36.928Z,1528872756.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:37.323Z,1528872757.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:37.731Z,1528872757.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:38.123Z,1528872758.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:38.524Z,1528872758.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:38.932Z,1528872758.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:39.324Z,1528872759.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:39.724Z,1528872759.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:40.132Z,1528872760.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:40.528Z,1528872760.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:40.933Z,1528872760.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:41.283Z,1528872761.283 [NAL9602](INFO): NAL9602 initialized
2018-06-13T06:52:41.331Z,1528872761.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:41.720Z,1528872761.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:42.144Z,1528872762.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:42.537Z,1528872762.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:42.928Z,1528872762.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:43.326Z,1528872763.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:43.734Z,1528872763.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:44.121Z,1528872764.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:44.535Z,1528872764.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:44.944Z,1528872764.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:45.333Z,1528872765.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:45.740Z,1528872765.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:46.132Z,1528872766.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:46.520Z,1528872766.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:46.925Z,1528872766.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:47.335Z,1528872767.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:47.720Z,1528872767.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:48.138Z,1528872768.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:48.537Z,1528872768.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:48.927Z,1528872768.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:49.325Z,1528872769.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:49.734Z,1528872769.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:50.121Z,1528872770.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:50.526Z,1528872770.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:50.933Z,1528872770.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:51.337Z,1528872771.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:51.738Z,1528872771.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:52.132Z,1528872772.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:52.525Z,1528872772.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:52.935Z,1528872772.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:53.330Z,1528872773.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:53.729Z,1528872773.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:54.148Z,1528872774.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:54.537Z,1528872774.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:54.939Z,1528872774.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:55.334Z,1528872775.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:55.713Z,1528872775.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:56.137Z,1528872776.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:56.520Z,1528872776.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:56.947Z,1528872776.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:57.345Z,1528872777.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:57.742Z,1528872777.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:58.120Z,1528872778.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:58.520Z,1528872778.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:58.919Z,1528872778.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:59.320Z,1528872779.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:52:59.720Z,1528872779.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:00.145Z,1528872780.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:00.546Z,1528872780.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:00.944Z,1528872780.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:01.324Z,1528872781.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:01.716Z,1528872781.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:02.120Z,1528872782.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:02.521Z,1528872782.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:02.944Z,1528872782.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:03.327Z,1528872783.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:03.747Z,1528872783.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:04.120Z,1528872784.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:04.520Z,1528872784.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:04.920Z,1528872784.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:05.322Z,1528872785.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:05.717Z,1528872785.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:06.131Z,1528872786.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:06.531Z,1528872786.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:06.927Z,1528872786.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:07.327Z,1528872787.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:07.729Z,1528872787.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:08.118Z,1528872788.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:08.522Z,1528872788.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:08.928Z,1528872788.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:09.331Z,1528872789.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:09.735Z,1528872789.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:10.123Z,1528872790.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:10.522Z,1528872790.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:10.923Z,1528872790.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:11.324Z,1528872791.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:11.722Z,1528872791.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:12.131Z,1528872792.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:12.531Z,1528872792.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:12.936Z,1528872792.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:16.066Z,1528872796.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:16.219Z,1528872796.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:16.618Z,1528872796.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:17.023Z,1528872797.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:17.418Z,1528872797.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:17.814Z,1528872797.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:18.215Z,1528872798.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:18.604Z,1528872798.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:19.020Z,1528872799.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:19.420Z,1528872799.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:19.820Z,1528872799.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:20.215Z,1528872800.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:20.617Z,1528872800.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:21.013Z,1528872801.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:21.399Z,1528872801.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:21.826Z,1528872801.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:22.228Z,1528872802.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:22.626Z,1528872802.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:23.001Z,1528872803.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:23.400Z,1528872803.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:23.824Z,1528872803.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:24.227Z,1528872804.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:24.624Z,1528872804.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:25.004Z,1528872805.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:25.400Z,1528872805.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:25.808Z,1528872805.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:26.228Z,1528872806.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:26.630Z,1528872806.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:27.001Z,1528872807.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:27.400Z,1528872807.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:27.808Z,1528872807.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:28.234Z,1528872808.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:28.632Z,1528872808.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:29.004Z,1528872809.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:29.403Z,1528872809.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:29.802Z,1528872809.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:30.240Z,1528872810.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:30.616Z,1528872810.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:31.008Z,1528872811.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:31.405Z,1528872811.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:31.801Z,1528872811.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:32.205Z,1528872812.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:32.613Z,1528872812.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:33.013Z,1528872813.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:33.416Z,1528872813.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:33.816Z,1528872813.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:34.202Z,1528872814.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:34.603Z,1528872814.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:35.004Z,1528872815.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:35.403Z,1528872815.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:35.813Z,1528872815.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:36.218Z,1528872816.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:36.617Z,1528872816.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:37.020Z,1528872817.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:37.408Z,1528872817.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:37.812Z,1528872817.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:38.217Z,1528872818.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:38.608Z,1528872818.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:39.019Z,1528872819.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:39.424Z,1528872819.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:39.820Z,1528872819.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:40.211Z,1528872820.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:40.607Z,1528872820.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:41.016Z,1528872821.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:41.416Z,1528872821.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:41.812Z,1528872821.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:42.219Z,1528872822.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:42.628Z,1528872822.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:43.014Z,1528872823.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:43.418Z,1528872823.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:43.811Z,1528872823.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:44.218Z,1528872824.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:44.617Z,1528872824.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:45.015Z,1528872825.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:45.425Z,1528872825.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:45.822Z,1528872825.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:46.196Z,1528872826.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:46.617Z,1528872826.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:47.002Z,1528872827.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:47.404Z,1528872827.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:47.804Z,1528872827.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:48.231Z,1528872828.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:48.607Z,1528872828.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:49.029Z,1528872829.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:49.402Z,1528872829.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:49.800Z,1528872829.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:50.228Z,1528872830.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:50.601Z,1528872830.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:51.008Z,1528872831.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:51.416Z,1528872831.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:51.836Z,1528872831.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:52.206Z,1528872832.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:52.604Z,1528872832.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:53.004Z,1528872833.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:53.401Z,1528872833.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:53.804Z,1528872833.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:54.220Z,1528872834.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:54.612Z,1528872834.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:55.011Z,1528872835.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:55.408Z,1528872835.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:55.800Z,1528872835.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:56.204Z,1528872836.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:56.604Z,1528872836.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:57.011Z,1528872837.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:57.415Z,1528872837.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:57.814Z,1528872837.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:58.201Z,1528872838.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:58.605Z,1528872838.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:59.017Z,1528872839.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:59.401Z,1528872839.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:53:59.805Z,1528872839.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:00.221Z,1528872840.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:00.620Z,1528872840.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:01.020Z,1528872841.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:01.409Z,1528872841.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:01.803Z,1528872841.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:02.206Z,1528872842.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:02.607Z,1528872842.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:03.021Z,1528872843.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:03.415Z,1528872843.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:03.824Z,1528872843.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:04.200Z,1528872844.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:04.604Z,1528872844.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:05.018Z,1528872845.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:05.405Z,1528872845.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:05.806Z,1528872845.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:06.226Z,1528872846.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:06.617Z,1528872846.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:07.013Z,1528872847.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:07.418Z,1528872847.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:07.809Z,1528872847.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:08.216Z,1528872848.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:08.616Z,1528872848.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:09.015Z,1528872849.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:09.416Z,1528872849.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:09.824Z,1528872849.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:10.218Z,1528872850.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:13.327Z,1528872853.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:13.462Z,1528872853.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:13.876Z,1528872853.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:14.275Z,1528872854.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:14.676Z,1528872854.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:15.068Z,1528872855.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:15.449Z,1528872855.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:15.848Z,1528872855.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:16.274Z,1528872856.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:16.680Z,1528872856.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:17.074Z,1528872857.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:17.452Z,1528872857.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:17.851Z,1528872857.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:18.252Z,1528872858.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:18.652Z,1528872858.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:19.070Z,1528872859.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:19.476Z,1528872859.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:19.870Z,1528872859.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:20.276Z,1528872860.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:20.652Z,1528872860.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:21.052Z,1528872861.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:21.454Z,1528872861.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:21.856Z,1528872861.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:22.275Z,1528872862.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:22.674Z,1528872862.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:23.075Z,1528872863.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:23.456Z,1528872863.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:23.856Z,1528872863.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:24.249Z,1528872864.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:24.656Z,1528872864.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:25.078Z,1528872865.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:25.478Z,1528872865.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:25.876Z,1528872865.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:26.276Z,1528872866.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:26.664Z,1528872866.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:27.056Z,1528872867.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:27.467Z,1528872867.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:27.857Z,1528872867.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:28.272Z,1528872868.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:28.672Z,1528872868.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:29.063Z,1528872869.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:29.455Z,1528872869.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:29.860Z,1528872869.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:30.256Z,1528872870.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:30.659Z,1528872870.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:31.066Z,1528872871.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:31.472Z,1528872871.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:31.862Z,1528872871.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:32.269Z,1528872872.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:32.662Z,1528872872.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:33.056Z,1528872873.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:33.457Z,1528872873.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:33.860Z,1528872873.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:34.265Z,1528872874.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:34.670Z,1528872874.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:35.063Z,1528872875.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:35.456Z,1528872875.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:35.862Z,1528872875.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:36.256Z,1528872876.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:36.655Z,1528872876.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:37.093Z,1528872877.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:37.472Z,1528872877.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:37.868Z,1528872877.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:38.260Z,1528872878.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:38.653Z,1528872878.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:39.060Z,1528872879.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:39.468Z,1528872879.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:39.852Z,1528872879.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:40.272Z,1528872880.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:40.670Z,1528872880.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:41.063Z,1528872881.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:41.460Z,1528872881.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:41.870Z,1528872881.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:42.262Z,1528872882.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:42.666Z,1528872882.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:43.071Z,1528872883.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:43.472Z,1528872883.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:43.865Z,1528872883.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:44.265Z,1528872884.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:44.663Z,1528872884.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:45.067Z,1528872885.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:45.464Z,1528872885.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:45.862Z,1528872885.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:46.272Z,1528872886.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:46.673Z,1528872886.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:47.068Z,1528872887.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:47.462Z,1528872887.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:47.868Z,1528872887.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:48.266Z,1528872888.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:48.662Z,1528872888.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:49.071Z,1528872889.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:49.472Z,1528872889.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:49.867Z,1528872889.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:50.266Z,1528872890.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:50.644Z,1528872890.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:51.072Z,1528872891.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:51.449Z,1528872891.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:51.848Z,1528872891.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:52.280Z,1528872892.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:52.684Z,1528872892.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:53.075Z,1528872893.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:53.452Z,1528872893.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:53.851Z,1528872893.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:54.256Z,1528872894.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:54.652Z,1528872894.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:55.079Z,1528872895.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:55.459Z,1528872895.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:55.863Z,1528872895.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:56.257Z,1528872896.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:56.652Z,1528872896.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:57.056Z,1528872897.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:57.452Z,1528872897.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:57.850Z,1528872897.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:58.263Z,1528872898.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:58.686Z,1528872898.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:59.084Z,1528872899.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:59.456Z,1528872899.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:54:59.853Z,1528872899.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:00.253Z,1528872900.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:00.656Z,1528872900.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:01.064Z,1528872901.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:01.459Z,1528872901.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:01.859Z,1528872901.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:02.256Z,1528872902.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:02.653Z,1528872902.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:03.056Z,1528872903.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:03.473Z,1528872903.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:03.864Z,1528872903.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:04.260Z,1528872904.260 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:04.260Z,1528872904.260 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70
2018-06-13T06:55:04.260Z,1528872904.260 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:55:04.262Z,1528872904.262 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:04.262Z,1528872904.262 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70
2018-06-13T06:55:04.262Z,1528872904.262 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:55:04.264Z,1528872904.264 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:04.264Z,1528872904.264 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 70
2018-06-13T06:55:04.264Z,1528872904.264 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:55:04.353Z,1528872904.353 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:55:04.354Z,1528872904.354 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:55:04.354Z,1528872904.354 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:55:04.761Z,1528872904.761 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:55:04.761Z,1528872904.761 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70
2018-06-13T06:55:04.762Z,1528872904.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:55:04.762Z,1528872904.762 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70
2018-06-13T06:55:04.762Z,1528872904.762 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:55:04.762Z,1528872904.762 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 70
2018-06-13T06:55:05.064Z,1528872905.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:55:05.064Z,1528872905.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:55:05.064Z,1528872905.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:55:05.065Z,1528872905.065 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:55:05.065Z,1528872905.065 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:55:05.066Z,1528872905.066 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:55:05.066Z,1528872905.066 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:55:05.066Z,1528872905.066 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:55:05.067Z,1528872905.067 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:55:05.464Z,1528872905.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:55:05.469Z,1528872905.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:05.866Z,1528872905.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:55:05.867Z,1528872905.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:06.269Z,1528872906.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:55:06.270Z,1528872906.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:06.648Z,1528872906.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:55:06.648Z,1528872906.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:07.074Z,1528872907.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:55:07.075Z,1528872907.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:07.471Z,1528872907.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:55:07.472Z,1528872907.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:07.876Z,1528872907.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:55:07.877Z,1528872907.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:08.269Z,1528872908.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:55:08.270Z,1528872908.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:08.652Z,1528872908.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:55:08.653Z,1528872908.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:09.056Z,1528872909.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:55:09.057Z,1528872909.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:09.454Z,1528872909.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:55:09.455Z,1528872909.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:09.852Z,1528872909.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T06:55:09.853Z,1528872909.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:10.280Z,1528872910.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T06:55:10.281Z,1528872910.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:10.682Z,1528872910.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T06:55:10.683Z,1528872910.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:11.079Z,1528872911.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T06:55:11.080Z,1528872911.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:11.460Z,1528872911.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T06:55:11.481Z,1528872911.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:14.589Z,1528872914.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T06:55:14.590Z,1528872914.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:14.740Z,1528872914.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T06:55:14.740Z,1528872914.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:15.142Z,1528872915.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T06:55:15.143Z,1528872915.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:15.550Z,1528872915.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T06:55:15.551Z,1528872915.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:15.942Z,1528872915.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T06:55:15.943Z,1528872915.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:16.337Z,1528872916.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T06:55:16.338Z,1528872916.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:16.745Z,1528872916.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T06:55:16.746Z,1528872916.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:17.136Z,1528872917.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T06:55:17.142Z,1528872917.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:17.529Z,1528872917.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T06:55:17.530Z,1528872917.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:17.948Z,1528872917.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T06:55:17.954Z,1528872917.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:18.350Z,1528872918.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T06:55:18.351Z,1528872918.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:18.755Z,1528872918.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T06:55:18.756Z,1528872918.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:19.156Z,1528872919.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T06:55:19.157Z,1528872919.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:19.520Z,1528872919.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T06:55:19.522Z,1528872919.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:19.928Z,1528872919.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T06:55:19.945Z,1528872919.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:20.324Z,1528872920.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T06:55:20.325Z,1528872920.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:20.724Z,1528872920.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T06:55:20.725Z,1528872920.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:21.155Z,1528872921.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T06:55:21.156Z,1528872921.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:21.563Z,1528872921.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T06:55:21.564Z,1528872921.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:21.934Z,1528872921.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T06:55:21.935Z,1528872921.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:22.327Z,1528872922.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T06:55:22.328Z,1528872922.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:22.729Z,1528872922.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T06:55:22.730Z,1528872922.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:23.123Z,1528872923.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T06:55:23.124Z,1528872923.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:23.531Z,1528872923.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T06:55:23.532Z,1528872923.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:23.926Z,1528872923.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T06:55:23.927Z,1528872923.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:24.332Z,1528872924.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:24.735Z,1528872924.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:25.135Z,1528872925.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:25.525Z,1528872925.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:25.925Z,1528872925.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:26.335Z,1528872926.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:26.720Z,1528872926.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:27.139Z,1528872927.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:27.556Z,1528872927.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:27.950Z,1528872927.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:28.324Z,1528872928.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:28.724Z,1528872928.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:29.120Z,1528872929.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:29.528Z,1528872929.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:29.924Z,1528872929.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:30.332Z,1528872930.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:30.750Z,1528872930.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:31.151Z,1528872931.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:31.523Z,1528872931.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:31.923Z,1528872931.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:32.325Z,1528872932.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:32.724Z,1528872932.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:33.131Z,1528872933.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:33.535Z,1528872933.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:33.931Z,1528872933.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:34.325Z,1528872934.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:34.727Z,1528872934.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:35.124Z,1528872935.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:35.525Z,1528872935.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:35.927Z,1528872935.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:36.332Z,1528872936.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:36.734Z,1528872936.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:37.136Z,1528872937.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:37.525Z,1528872937.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:37.926Z,1528872937.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:38.338Z,1528872938.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:38.724Z,1528872938.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:39.136Z,1528872939.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:39.535Z,1528872939.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:39.936Z,1528872939.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:40.326Z,1528872940.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:40.727Z,1528872940.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:41.124Z,1528872941.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:41.528Z,1528872941.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:41.942Z,1528872941.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:42.332Z,1528872942.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:42.740Z,1528872942.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:43.137Z,1528872943.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:43.524Z,1528872943.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:43.932Z,1528872943.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:44.329Z,1528872944.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:44.724Z,1528872944.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:45.140Z,1528872945.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:45.536Z,1528872945.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:45.934Z,1528872945.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:46.329Z,1528872946.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:46.738Z,1528872946.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:47.128Z,1528872947.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:47.539Z,1528872947.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:47.931Z,1528872947.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:48.341Z,1528872948.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:48.751Z,1528872948.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:49.138Z,1528872949.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:49.536Z,1528872949.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:49.936Z,1528872949.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:50.338Z,1528872950.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:50.741Z,1528872950.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:51.151Z,1528872951.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:51.550Z,1528872951.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:51.950Z,1528872951.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:52.325Z,1528872952.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:52.723Z,1528872952.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:53.124Z,1528872953.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:53.532Z,1528872953.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:53.923Z,1528872953.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:54.331Z,1528872954.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:54.754Z,1528872954.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:55.134Z,1528872955.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:55.526Z,1528872955.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:55.932Z,1528872955.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:56.328Z,1528872956.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:56.724Z,1528872956.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:57.132Z,1528872957.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:57.535Z,1528872957.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:57.932Z,1528872957.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:58.325Z,1528872958.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:58.725Z,1528872958.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:59.124Z,1528872959.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:59.525Z,1528872959.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:55:59.925Z,1528872959.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:00.333Z,1528872960.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:00.735Z,1528872960.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:01.134Z,1528872961.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:01.528Z,1528872961.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:01.926Z,1528872961.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:02.327Z,1528872962.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:02.732Z,1528872962.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:03.132Z,1528872963.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:03.534Z,1528872963.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:03.931Z,1528872963.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:04.325Z,1528872964.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:04.725Z,1528872964.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:05.126Z,1528872965.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:05.525Z,1528872965.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:05.927Z,1528872965.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:06.331Z,1528872966.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:06.734Z,1528872966.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:07.140Z,1528872967.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:07.528Z,1528872967.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:07.926Z,1528872967.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:08.326Z,1528872968.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:08.726Z,1528872968.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:09.131Z,1528872969.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:09.534Z,1528872969.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:09.940Z,1528872969.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:09.959Z,1528872969.959 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T06:56:09.959Z,1528872969.959 [Default:CheckIn:C.Wait] Stopped
2018-06-13T06:56:09.959Z,1528872969.959 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T06:56:09.960Z,1528872969.960 [Default:CheckIn:D] Running Loop=1
2018-06-13T06:56:10.329Z,1528872970.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:10.332Z,1528872970.332 [Default:CheckIn:D] Stopped
2018-06-13T06:56:10.332Z,1528872970.332 [Default:CheckIn:E] Running Loop=1
2018-06-13T06:56:13.468Z,1528872973.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:13.471Z,1528872973.471 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 208.948112 min 
2018-06-13T06:56:13.472Z,1528872973.472 [Default:CheckIn:E] Stopped
2018-06-13T06:56:13.472Z,1528872973.472 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T06:56:13.472Z,1528872973.472 [Default:CheckIn] Stopped
2018-06-13T06:56:13.472Z,1528872973.472 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T06:56:13.472Z,1528872973.472 [Default:CheckIn](INFO): Running loop #21
2018-06-13T06:56:13.472Z,1528872973.472 [Default:CheckIn] Running Loop=21
2018-06-13T06:56:13.472Z,1528872973.472 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T06:56:13.472Z,1528872973.472 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T06:56:13.618Z,1528872973.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:14.027Z,1528872974.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:14.433Z,1528872974.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:14.803Z,1528872974.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:15.195Z,1528872975.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:15.599Z,1528872975.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:15.999Z,1528872975.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:16.403Z,1528872976.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:16.806Z,1528872976.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:17.207Z,1528872977.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:17.598Z,1528872977.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:17.999Z,1528872977.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:18.398Z,1528872978.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:18.798Z,1528872978.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:19.221Z,1528872979.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:19.607Z,1528872979.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:20.003Z,1528872980.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:20.399Z,1528872980.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:20.810Z,1528872980.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:21.200Z,1528872981.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:21.596Z,1528872981.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:21.999Z,1528872981.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:22.407Z,1528872982.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:22.809Z,1528872982.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:23.212Z,1528872983.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:23.600Z,1528872983.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:23.999Z,1528872983.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:24.398Z,1528872984.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:24.800Z,1528872984.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:25.213Z,1528872985.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:25.612Z,1528872985.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:26.007Z,1528872986.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:26.408Z,1528872986.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:26.798Z,1528872986.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:27.200Z,1528872987.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:27.603Z,1528872987.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:27.998Z,1528872987.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:28.407Z,1528872988.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:28.812Z,1528872988.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:29.212Z,1528872989.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:29.600Z,1528872989.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:30.003Z,1528872990.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:30.402Z,1528872990.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:30.800Z,1528872990.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:31.215Z,1528872991.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:31.613Z,1528872991.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:32.008Z,1528872992.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:32.408Z,1528872992.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:32.797Z,1528872992.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:33.203Z,1528872993.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:33.601Z,1528872993.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:33.000Z,1528872994.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:34.409Z,1528872994.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:34.816Z,1528872994.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:35.216Z,1528872995.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:35.601Z,1528872995.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:35.000Z,1528872996.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:36.401Z,1528872996.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:36.800Z,1528872996.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:37.210Z,1528872997.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:37.613Z,1528872997.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:38.007Z,1528872998.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:38.403Z,1528872998.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:38.805Z,1528872998.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:39.201Z,1528872999.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:39.606Z,1528872999.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:40.005Z,1528873000.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:40.408Z,1528873000.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:40.811Z,1528873000.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:41.209Z,1528873001.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:41.600Z,1528873001.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:42.001Z,1528873002.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:42.399Z,1528873002.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:42.800Z,1528873002.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:43.213Z,1528873003.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:43.609Z,1528873003.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:44.007Z,1528873004.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:44.400Z,1528873004.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:44.805Z,1528873004.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:45.200Z,1528873005.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:45.606Z,1528873005.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:45.999Z,1528873005.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:46.407Z,1528873006.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:46.809Z,1528873006.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:47.212Z,1528873007.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:47.600Z,1528873007.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:48.000Z,1528873008.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:48.398Z,1528873008.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:48.800Z,1528873008.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:49.216Z,1528873009.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:49.607Z,1528873009.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:50.007Z,1528873010.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:50.399Z,1528873010.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:50.804Z,1528873010.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:51.200Z,1528873011.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:51.614Z,1528873011.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:52.000Z,1528873012.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:52.409Z,1528873012.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:52.815Z,1528873012.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:53.209Z,1528873013.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:53.612Z,1528873013.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:54.005Z,1528873014.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:54.404Z,1528873014.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:54.808Z,1528873014.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:55.218Z,1528873015.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:55.620Z,1528873015.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:56.010Z,1528873016.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:56.411Z,1528873016.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:56.796Z,1528873016.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:57.196Z,1528873017.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:57.620Z,1528873017.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:57.995Z,1528873017.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:58.423Z,1528873018.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:58.807Z,1528873018.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:59.204Z,1528873019.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:59.604Z,1528873019.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:56:59.999Z,1528873019.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:00.398Z,1528873020.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:00.798Z,1528873020.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:01.207Z,1528873021.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:01.603Z,1528873021.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:02.003Z,1528873022.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:02.400Z,1528873022.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:02.797Z,1528873022.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:03.256Z,1528873023.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:03.600Z,1528873023.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:03.996Z,1528873023.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:04.404Z,1528873024.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:04.807Z,1528873024.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:05.204Z,1528873025.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:05.598Z,1528873025.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:05.000Z,1528873026.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:06.395Z,1528873026.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:06.798Z,1528873026.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:07.208Z,1528873027.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:07.603Z,1528873027.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:08.003Z,1528873028.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:08.410Z,1528873028.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:08.796Z,1528873028.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:09.205Z,1528873029.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:09.607Z,1528873029.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:10.012Z,1528873030.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:10.403Z,1528873030.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:13.542Z,1528873033.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:13.700Z,1528873033.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:14.092Z,1528873034.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:14.493Z,1528873034.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:14.864Z,1528873034.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:15.264Z,1528873035.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:15.664Z,1528873035.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:16.061Z,1528873036.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:16.488Z,1528873036.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:16.890Z,1528873036.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:17.296Z,1528873037.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:17.664Z,1528873037.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:18.085Z,1528873038.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:18.460Z,1528873038.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:18.868Z,1528873038.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:19.296Z,1528873039.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:19.692Z,1528873039.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:20.092Z,1528873040.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:20.465Z,1528873040.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:20.860Z,1528873040.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:21.264Z,1528873041.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:21.665Z,1528873041.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:22.065Z,1528873042.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:22.496Z,1528873042.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:22.880Z,1528873042.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:23.277Z,1528873043.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:23.666Z,1528873043.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:24.068Z,1528873044.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:24.465Z,1528873044.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:24.869Z,1528873044.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:25.280Z,1528873045.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:25.676Z,1528873045.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:26.072Z,1528873046.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:26.468Z,1528873046.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:26.865Z,1528873046.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:27.269Z,1528873047.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:27.678Z,1528873047.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:28.065Z,1528873048.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:28.480Z,1528873048.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:28.881Z,1528873048.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:29.273Z,1528873049.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:29.669Z,1528873049.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:30.072Z,1528873050.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:30.466Z,1528873050.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:30.868Z,1528873050.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:31.284Z,1528873051.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:31.677Z,1528873051.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:32.081Z,1528873052.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:32.468Z,1528873052.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:32.864Z,1528873052.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:33.266Z,1528873053.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:33.668Z,1528873053.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:34.064Z,1528873054.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:34.480Z,1528873054.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:34.880Z,1528873054.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:35.275Z,1528873055.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:35.668Z,1528873055.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:36.068Z,1528873056.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:36.468Z,1528873056.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:36.868Z,1528873056.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:37.284Z,1528873057.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:37.676Z,1528873057.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:38.075Z,1528873058.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:38.468Z,1528873058.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:38.864Z,1528873058.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:39.268Z,1528873059.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:39.668Z,1528873059.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:40.064Z,1528873060.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:40.480Z,1528873060.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:40.884Z,1528873060.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:41.280Z,1528873061.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:41.668Z,1528873061.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:42.071Z,1528873062.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:42.465Z,1528873062.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:42.868Z,1528873062.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:43.284Z,1528873063.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:43.680Z,1528873063.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:44.080Z,1528873064.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:44.468Z,1528873064.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:44.864Z,1528873064.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:45.266Z,1528873065.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:45.668Z,1528873065.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:46.066Z,1528873066.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:46.480Z,1528873066.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:46.884Z,1528873066.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:47.273Z,1528873067.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:47.668Z,1528873067.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:48.068Z,1528873068.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:48.465Z,1528873068.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:48.868Z,1528873068.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:49.284Z,1528873069.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:49.680Z,1528873069.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:50.077Z,1528873070.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:50.468Z,1528873070.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:50.863Z,1528873070.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:51.268Z,1528873071.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:51.680Z,1528873071.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:52.064Z,1528873072.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:52.480Z,1528873072.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:52.884Z,1528873072.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:53.273Z,1528873073.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:53.667Z,1528873073.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:54.068Z,1528873074.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:54.465Z,1528873074.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:54.868Z,1528873074.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:55.281Z,1528873075.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:55.681Z,1528873075.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:56.078Z,1528873076.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:56.476Z,1528873076.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:56.865Z,1528873076.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:57.278Z,1528873077.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:57.684Z,1528873077.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:58.073Z,1528873078.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:58.474Z,1528873078.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:58.876Z,1528873078.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:59.274Z,1528873079.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:57:59.683Z,1528873079.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:00.079Z,1528873080.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:00.468Z,1528873080.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:00.868Z,1528873080.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:01.281Z,1528873081.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:01.685Z,1528873081.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:02.084Z,1528873082.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:02.468Z,1528873082.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:02.868Z,1528873082.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:03.285Z,1528873083.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:03.689Z,1528873083.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:04.074Z,1528873084.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:04.472Z,1528873084.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:04.867Z,1528873084.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:05.281Z,1528873085.281 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:05.281Z,1528873085.281 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71
2018-06-13T06:58:05.281Z,1528873085.281 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T06:58:05.283Z,1528873085.283 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:05.283Z,1528873085.283 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71
2018-06-13T06:58:05.283Z,1528873085.283 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T06:58:05.285Z,1528873085.285 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:05.285Z,1528873085.285 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 71
2018-06-13T06:58:05.285Z,1528873085.285 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T06:58:05.377Z,1528873085.377 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T06:58:05.377Z,1528873085.377 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T06:58:05.378Z,1528873085.378 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T06:58:05.757Z,1528873085.757 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T06:58:05.757Z,1528873085.757 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71
2018-06-13T06:58:05.758Z,1528873085.758 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T06:58:05.758Z,1528873085.758 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71
2018-06-13T06:58:05.758Z,1528873085.758 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T06:58:05.758Z,1528873085.758 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 71
2018-06-13T06:58:06.095Z,1528873086.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T06:58:06.095Z,1528873086.095 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:58:06.096Z,1528873086.096 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:58:06.096Z,1528873086.096 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T06:58:06.096Z,1528873086.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:58:06.097Z,1528873086.097 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:58:06.097Z,1528873086.097 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T06:58:06.098Z,1528873086.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T06:58:06.098Z,1528873086.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T06:58:06.473Z,1528873086.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T06:58:06.474Z,1528873086.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:06.860Z,1528873086.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T06:58:06.877Z,1528873086.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:07.294Z,1528873087.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T06:58:07.295Z,1528873087.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:07.683Z,1528873087.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T06:58:07.684Z,1528873087.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:08.086Z,1528873088.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T06:58:08.087Z,1528873088.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:08.461Z,1528873088.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T06:58:08.462Z,1528873088.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:08.860Z,1528873088.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T06:58:08.861Z,1528873088.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:09.284Z,1528873089.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T06:58:09.285Z,1528873089.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:09.689Z,1528873089.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T06:58:09.690Z,1528873089.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:10.086Z,1528873090.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T06:58:10.087Z,1528873090.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:10.481Z,1528873090.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T06:58:10.482Z,1528873090.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:13.599Z,1528873093.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T06:58:13.600Z,1528873093.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:13.764Z,1528873093.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T06:58:13.764Z,1528873093.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:14.149Z,1528873094.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T06:58:14.150Z,1528873094.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:14.563Z,1528873094.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T06:58:14.564Z,1528873094.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:14.936Z,1528873094.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T06:58:14.941Z,1528873094.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:15.342Z,1528873095.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T06:58:15.343Z,1528873095.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:15.745Z,1528873095.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T06:58:15.746Z,1528873095.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:16.120Z,1528873096.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T06:58:16.137Z,1528873096.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:16.542Z,1528873096.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T06:58:16.543Z,1528873096.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:16.944Z,1528873096.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T06:58:16.945Z,1528873096.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:17.343Z,1528873097.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T06:58:17.344Z,1528873097.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:17.744Z,1528873097.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T06:58:17.749Z,1528873097.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:18.120Z,1528873098.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T06:58:18.121Z,1528873098.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:18.525Z,1528873098.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T06:58:18.526Z,1528873098.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:18.932Z,1528873098.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T06:58:18.949Z,1528873098.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:19.360Z,1528873099.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T06:58:19.361Z,1528873099.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:19.754Z,1528873099.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T06:58:19.755Z,1528873099.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:20.138Z,1528873100.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T06:58:20.139Z,1528873100.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:20.529Z,1528873100.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T06:58:20.530Z,1528873100.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:20.929Z,1528873100.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T06:58:20.930Z,1528873100.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:21.328Z,1528873101.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T06:58:21.330Z,1528873101.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:21.730Z,1528873101.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T06:58:21.731Z,1528873101.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:22.131Z,1528873102.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T06:58:22.132Z,1528873102.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:22.535Z,1528873102.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T06:58:22.536Z,1528873102.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:22.938Z,1528873102.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T06:58:22.939Z,1528873102.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:23.335Z,1528873103.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T06:58:23.336Z,1528873103.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:23.728Z,1528873103.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T06:58:23.730Z,1528873103.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:24.130Z,1528873104.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T06:58:24.131Z,1528873104.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:24.530Z,1528873104.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T06:58:24.530Z,1528873104.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:24.929Z,1528873104.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T06:58:24.930Z,1528873104.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:25.340Z,1528873105.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:25.739Z,1528873105.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:26.136Z,1528873106.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:26.529Z,1528873106.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:26.932Z,1528873106.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:27.330Z,1528873107.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:27.731Z,1528873107.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:28.132Z,1528873108.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:28.535Z,1528873108.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:28.944Z,1528873108.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:29.339Z,1528873109.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:29.730Z,1528873109.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:30.136Z,1528873110.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:30.530Z,1528873110.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:30.930Z,1528873110.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:31.339Z,1528873111.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:31.743Z,1528873111.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:32.135Z,1528873112.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:32.532Z,1528873112.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:32.929Z,1528873112.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:33.335Z,1528873113.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:33.739Z,1528873113.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:34.135Z,1528873114.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:34.531Z,1528873114.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:34.936Z,1528873114.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:35.335Z,1528873115.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:35.739Z,1528873115.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:36.139Z,1528873116.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:36.531Z,1528873116.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:36.930Z,1528873116.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:37.339Z,1528873117.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:37.739Z,1528873117.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:38.135Z,1528873118.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:38.532Z,1528873118.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:38.930Z,1528873118.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:39.335Z,1528873119.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:39.739Z,1528873119.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:40.135Z,1528873120.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:40.530Z,1528873120.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:40.931Z,1528873120.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:41.335Z,1528873121.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:41.739Z,1528873121.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:42.168Z,1528873122.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:42.532Z,1528873122.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:42.932Z,1528873122.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:43.339Z,1528873123.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:43.736Z,1528873123.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:44.136Z,1528873124.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:44.536Z,1528873124.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:44.928Z,1528873124.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:45.337Z,1528873125.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:45.744Z,1528873125.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:46.136Z,1528873126.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:46.530Z,1528873126.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:46.932Z,1528873126.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:47.336Z,1528873127.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:47.739Z,1528873127.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:48.140Z,1528873128.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:48.536Z,1528873128.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:48.930Z,1528873128.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:49.340Z,1528873129.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:49.735Z,1528873129.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:50.163Z,1528873130.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:50.534Z,1528873130.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:50.927Z,1528873130.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:51.336Z,1528873131.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:51.741Z,1528873131.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:52.139Z,1528873132.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:52.537Z,1528873132.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:52.949Z,1528873132.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:53.344Z,1528873133.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:53.745Z,1528873133.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:54.152Z,1528873134.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:54.533Z,1528873134.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:54.936Z,1528873134.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:55.352Z,1528873135.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:55.744Z,1528873135.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:56.140Z,1528873136.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:56.532Z,1528873136.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:56.934Z,1528873136.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:57.341Z,1528873137.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:57.746Z,1528873137.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:58.142Z,1528873138.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:58.533Z,1528873138.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:58.944Z,1528873138.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:59.337Z,1528873139.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:58:59.744Z,1528873139.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:00.144Z,1528873140.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:00.529Z,1528873140.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:00.932Z,1528873140.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:01.352Z,1528873141.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:01.746Z,1528873141.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:02.140Z,1528873142.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:02.544Z,1528873142.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:02.932Z,1528873142.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:03.341Z,1528873143.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:03.746Z,1528873143.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:04.141Z,1528873144.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:04.535Z,1528873144.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:04.943Z,1528873144.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:05.336Z,1528873145.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:05.748Z,1528873145.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:06.152Z,1528873146.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:06.534Z,1528873146.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:06.932Z,1528873146.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:07.345Z,1528873147.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:07.748Z,1528873147.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:08.141Z,1528873148.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:08.542Z,1528873148.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:08.928Z,1528873148.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:09.341Z,1528873149.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:09.746Z,1528873149.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:10.140Z,1528873150.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:10.535Z,1528873150.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:13.648Z,1528873153.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:13.823Z,1528873153.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:14.193Z,1528873154.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:14.595Z,1528873154.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:14.980Z,1528873154.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:15.386Z,1528873155.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:15.789Z,1528873155.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:16.168Z,1528873156.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:16.595Z,1528873156.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:16.993Z,1528873156.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:17.394Z,1528873157.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:17.768Z,1528873157.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:18.192Z,1528873158.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:18.573Z,1528873158.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:18.971Z,1528873158.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:19.400Z,1528873159.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:19.783Z,1528873159.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:20.183Z,1528873160.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:20.574Z,1528873160.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:20.971Z,1528873160.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:21.379Z,1528873161.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:21.783Z,1528873161.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:22.179Z,1528873162.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:22.574Z,1528873162.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:22.984Z,1528873162.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:23.381Z,1528873163.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:23.783Z,1528873163.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:24.184Z,1528873164.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:24.574Z,1528873164.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:24.974Z,1528873164.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:25.383Z,1528873165.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:25.780Z,1528873165.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:26.192Z,1528873166.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:26.581Z,1528873166.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:26.976Z,1528873166.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:27.388Z,1528873167.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:27.785Z,1528873167.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:28.184Z,1528873168.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:28.578Z,1528873168.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:28.981Z,1528873168.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:29.382Z,1528873169.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:29.784Z,1528873169.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:30.185Z,1528873170.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:30.580Z,1528873170.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:30.977Z,1528873170.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:31.390Z,1528873171.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:31.785Z,1528873171.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:32.184Z,1528873172.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:32.584Z,1528873172.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:32.972Z,1528873172.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:33.384Z,1528873173.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:33.790Z,1528873173.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:34.182Z,1528873174.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:34.589Z,1528873174.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:34.988Z,1528873174.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:35.382Z,1528873175.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:35.796Z,1528873175.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:36.190Z,1528873176.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:36.576Z,1528873176.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:36.985Z,1528873176.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:37.393Z,1528873177.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:37.788Z,1528873177.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:38.191Z,1528873178.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:38.595Z,1528873178.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:38.964Z,1528873178.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:39.388Z,1528873179.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:39.792Z,1528873179.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:40.172Z,1528873180.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:40.596Z,1528873180.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:40.999Z,1528873180.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:41.396Z,1528873181.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:41.771Z,1528873181.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:42.172Z,1528873182.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:42.567Z,1528873182.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:42.976Z,1528873182.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:43.373Z,1528873183.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:43.779Z,1528873183.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:44.203Z,1528873184.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:44.583Z,1528873184.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:44.974Z,1528873184.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:45.374Z,1528873185.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:45.776Z,1528873185.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:46.172Z,1528873186.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:46.579Z,1528873186.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:46.983Z,1528873186.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:47.380Z,1528873187.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:47.776Z,1528873187.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:48.175Z,1528873188.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:48.572Z,1528873188.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:48.976Z,1528873188.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:49.375Z,1528873189.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:49.779Z,1528873189.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:50.183Z,1528873190.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:50.583Z,1528873190.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:50.971Z,1528873190.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:51.384Z,1528873191.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:51.777Z,1528873191.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:52.175Z,1528873192.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:52.584Z,1528873192.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:52.983Z,1528873192.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:53.432Z,1528873193.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:53.774Z,1528873193.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:54.176Z,1528873194.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:54.572Z,1528873194.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:54.980Z,1528873194.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:55.378Z,1528873195.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:55.784Z,1528873195.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:56.188Z,1528873196.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:56.592Z,1528873196.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:56.975Z,1528873196.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:57.376Z,1528873197.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:57.780Z,1528873197.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:58.172Z,1528873198.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:58.588Z,1528873198.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:58.992Z,1528873198.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:59.380Z,1528873199.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T06:59:59.776Z,1528873199.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:00.175Z,1528873200.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:00.572Z,1528873200.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:00.976Z,1528873200.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:01.388Z,1528873201.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:01.785Z,1528873201.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:02.189Z,1528873202.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:02.590Z,1528873202.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:02.972Z,1528873202.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:03.384Z,1528873203.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:03.778Z,1528873203.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:04.180Z,1528873204.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:04.586Z,1528873204.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:04.989Z,1528873204.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:05.382Z,1528873205.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:05.779Z,1528873205.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:06.176Z,1528873206.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:06.590Z,1528873206.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:06.981Z,1528873206.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:07.364Z,1528873207.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:07.795Z,1528873207.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:08.192Z,1528873208.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:08.598Z,1528873208.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:08.968Z,1528873208.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:09.384Z,1528873209.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:09.776Z,1528873209.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:10.172Z,1528873210.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:10.600Z,1528873210.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:13.708Z,1528873213.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:13.880Z,1528873213.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:14.264Z,1528873214.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:14.660Z,1528873214.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:15.052Z,1528873215.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:15.465Z,1528873215.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:15.867Z,1528873215.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:16.269Z,1528873216.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:16.662Z,1528873216.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:17.040Z,1528873217.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:17.467Z,1528873217.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:17.871Z,1528873217.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:18.275Z,1528873218.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:18.650Z,1528873218.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:19.052Z,1528873219.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:19.475Z,1528873219.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:19.855Z,1528873219.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:20.285Z,1528873220.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:20.648Z,1528873220.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:21.046Z,1528873221.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:21.459Z,1528873221.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:21.859Z,1528873221.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:22.256Z,1528873222.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:22.650Z,1528873222.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:23.050Z,1528873223.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:23.453Z,1528873223.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:23.855Z,1528873223.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:24.285Z,1528873224.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:24.650Z,1528873224.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:25.050Z,1528873225.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:25.455Z,1528873225.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:25.855Z,1528873225.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:26.280Z,1528873226.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:26.651Z,1528873226.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:27.050Z,1528873227.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:27.455Z,1528873227.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:27.858Z,1528873227.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:28.280Z,1528873228.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:28.656Z,1528873228.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:29.051Z,1528873229.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:29.455Z,1528873229.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:29.859Z,1528873229.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:30.282Z,1528873230.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:30.650Z,1528873230.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:31.053Z,1528873231.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:31.447Z,1528873231.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:31.855Z,1528873231.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:32.282Z,1528873232.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:32.658Z,1528873232.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:33.051Z,1528873233.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:33.450Z,1528873233.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:33.851Z,1528873233.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:34.252Z,1528873234.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:34.655Z,1528873234.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:35.059Z,1528873235.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:35.455Z,1528873235.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:35.850Z,1528873235.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:36.251Z,1528873236.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:36.650Z,1528873236.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:37.052Z,1528873237.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:37.451Z,1528873237.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:37.856Z,1528873237.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:38.262Z,1528873238.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:38.664Z,1528873238.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:39.050Z,1528873239.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:39.450Z,1528873239.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:39.855Z,1528873239.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:40.252Z,1528873240.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:40.655Z,1528873240.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:41.059Z,1528873241.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:41.455Z,1528873241.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:41.850Z,1528873241.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:42.256Z,1528873242.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:42.651Z,1528873242.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:43.051Z,1528873243.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:43.451Z,1528873243.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:43.855Z,1528873243.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:44.262Z,1528873244.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:44.660Z,1528873244.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:45.050Z,1528873245.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:45.450Z,1528873245.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:45.853Z,1528873245.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:46.252Z,1528873246.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:46.656Z,1528873246.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:47.059Z,1528873247.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:47.463Z,1528873247.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:47.850Z,1528873247.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:48.253Z,1528873248.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:48.647Z,1528873248.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:49.052Z,1528873249.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:49.460Z,1528873249.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:49.853Z,1528873249.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:50.283Z,1528873250.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:50.664Z,1528873250.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:51.049Z,1528873251.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:51.458Z,1528873251.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:51.853Z,1528873251.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:52.255Z,1528873252.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:52.656Z,1528873252.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:53.059Z,1528873253.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:53.459Z,1528873253.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:53.884Z,1528873253.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:54.257Z,1528873254.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:54.649Z,1528873254.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:55.053Z,1528873255.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:55.467Z,1528873255.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:55.861Z,1528873255.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:56.263Z,1528873256.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:56.661Z,1528873256.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:57.052Z,1528873257.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:57.451Z,1528873257.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:57.857Z,1528873257.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:58.252Z,1528873258.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:58.660Z,1528873258.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:59.068Z,1528873259.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:59.458Z,1528873259.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:00:59.866Z,1528873259.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:00.258Z,1528873260.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:00.656Z,1528873260.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:01.063Z,1528873261.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:01.457Z,1528873261.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:01.862Z,1528873261.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:02.267Z,1528873262.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:02.672Z,1528873262.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:03.056Z,1528873263.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:03.453Z,1528873263.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:03.857Z,1528873263.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:04.260Z,1528873264.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:04.661Z,1528873264.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:05.067Z,1528873265.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:05.464Z,1528873265.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:05.854Z,1528873265.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:06.269Z,1528873266.269 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:06.270Z,1528873266.270 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72
2018-06-13T07:01:06.270Z,1528873266.270 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:01:06.271Z,1528873266.271 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:06.271Z,1528873266.271 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72
2018-06-13T07:01:06.272Z,1528873266.272 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:01:06.273Z,1528873266.273 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:06.274Z,1528873266.274 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 72
2018-06-13T07:01:06.274Z,1528873266.274 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:01:06.377Z,1528873266.377 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:01:06.377Z,1528873266.377 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:01:06.378Z,1528873266.378 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:01:06.777Z,1528873266.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:01:06.777Z,1528873266.777 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72
2018-06-13T07:01:06.778Z,1528873266.778 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:01:06.778Z,1528873266.778 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72
2018-06-13T07:01:06.778Z,1528873266.778 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:01:06.778Z,1528873266.778 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 72
2018-06-13T07:01:07.063Z,1528873267.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:01:07.063Z,1528873267.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:01:07.064Z,1528873267.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:01:07.064Z,1528873267.064 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:01:07.065Z,1528873267.065 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:01:07.065Z,1528873267.065 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:01:07.065Z,1528873267.065 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:01:07.066Z,1528873267.066 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:01:07.066Z,1528873267.066 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:01:07.456Z,1528873267.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:01:07.461Z,1528873267.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:07.864Z,1528873267.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:01:07.865Z,1528873267.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:08.272Z,1528873268.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:01:08.272Z,1528873268.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:08.676Z,1528873268.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:01:08.681Z,1528873268.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:09.048Z,1528873269.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:01:09.069Z,1528873269.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:09.472Z,1528873269.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:01:09.477Z,1528873269.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:09.856Z,1528873269.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:01:09.873Z,1528873269.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:10.256Z,1528873270.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:01:10.257Z,1528873270.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:10.679Z,1528873270.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:01:10.679Z,1528873270.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:13.783Z,1528873273.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T07:01:13.784Z,1528873273.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:13.787Z,1528873273.787 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T06:56:13.5Z
2018-06-13T07:01:13.787Z,1528873273.787 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T07:01:13.787Z,1528873273.787 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T07:01:13.923Z,1528873273.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T07:01:13.924Z,1528873273.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:15.100Z,1528873275.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:01:15.101Z,1528873275.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:15.256Z,1528873275.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T07:01:15.257Z,1528873275.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:15.660Z,1528873275.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T07:01:15.661Z,1528873275.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:16.060Z,1528873276.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T07:01:16.061Z,1528873276.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:16.454Z,1528873276.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T07:01:16.454Z,1528873276.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:16.837Z,1528873276.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T07:01:16.838Z,1528873276.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:17.246Z,1528873277.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T07:01:17.247Z,1528873277.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:20.427Z,1528873280.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T07:01:20.428Z,1528873280.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:20.525Z,1528873280.525 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0084.lzma
2018-06-13T07:01:20.624Z,1528873280.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:01:20.625Z,1528873280.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:20.983Z,1528873280.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T07:01:20.984Z,1528873280.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:21.326Z,1528873281.326 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0084.lzma.bak
2018-06-13T07:01:21.326Z,1528873281.326 [DataOverHttps](INFO): SBD MOMSN=8328779
2018-06-13T07:01:21.387Z,1528873281.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-06-13T07:01:21.388Z,1528873281.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:23.317Z,1528873283.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T07:01:23.318Z,1528873283.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:23.461Z,1528873283.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:01:23.462Z,1528873283.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:23.870Z,1528873283.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:01:23.870Z,1528873283.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:24.280Z,1528873284.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:01:24.281Z,1528873284.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:24.676Z,1528873284.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:01:24.677Z,1528873284.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:25.074Z,1528873285.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:01:25.075Z,1528873285.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:25.479Z,1528873285.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:01:25.480Z,1528873285.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:25.864Z,1528873285.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:01:25.869Z,1528873285.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:26.274Z,1528873286.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:26.680Z,1528873286.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:29.806Z,1528873289.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:29.980Z,1528873289.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:30.376Z,1528873290.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:30.785Z,1528873290.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:31.179Z,1528873291.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:31.573Z,1528873291.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:34.701Z,1528873294.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:34.789Z,1528873294.789 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0085.lzma
2018-06-13T07:01:34.876Z,1528873294.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:35.250Z,1528873295.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:35.590Z,1528873295.590 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0085.lzma.bak
2018-06-13T07:01:35.590Z,1528873295.590 [DataOverHttps](INFO): SBD MOMSN=8328781
2018-06-13T07:01:35.665Z,1528873295.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:37.600Z,1528873297.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:37.603Z,1528873297.603 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T07:01:37.603Z,1528873297.603 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T07:01:37.603Z,1528873297.603 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T07:01:37.764Z,1528873297.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:40.875Z,1528873300.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:41.052Z,1528873301.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:41.458Z,1528873301.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:41.857Z,1528873301.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:42.267Z,1528873302.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:42.649Z,1528873302.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:43.054Z,1528873303.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:43.455Z,1528873303.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:43.856Z,1528873303.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:44.259Z,1528873304.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:44.663Z,1528873304.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:45.041Z,1528873305.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:45.434Z,1528873305.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:45.833Z,1528873305.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:46.232Z,1528873306.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:46.662Z,1528873306.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:47.069Z,1528873307.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:47.475Z,1528873307.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:47.871Z,1528873307.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:48.243Z,1528873308.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:48.632Z,1528873308.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:49.036Z,1528873309.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:49.436Z,1528873309.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:49.844Z,1528873309.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:50.242Z,1528873310.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:50.639Z,1528873310.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:51.037Z,1528873311.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:51.474Z,1528873311.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:51.838Z,1528873311.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:52.249Z,1528873312.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:52.660Z,1528873312.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:53.054Z,1528873313.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:53.441Z,1528873313.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:53.843Z,1528873313.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:54.239Z,1528873314.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:54.651Z,1528873314.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:55.056Z,1528873315.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:55.446Z,1528873315.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:55.838Z,1528873315.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:56.239Z,1528873316.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:56.751Z,1528873316.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:57.066Z,1528873317.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:57.506Z,1528873317.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:57.856Z,1528873317.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:58.245Z,1528873318.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:58.660Z,1528873318.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:59.064Z,1528873319.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:59.463Z,1528873319.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:01:59.830Z,1528873319.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:00.255Z,1528873320.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:00.676Z,1528873320.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:01.049Z,1528873321.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:01.444Z,1528873321.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:01.847Z,1528873321.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:02.240Z,1528873322.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:02.647Z,1528873322.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:03.049Z,1528873323.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:03.451Z,1528873323.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:03.841Z,1528873323.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:04.238Z,1528873324.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:04.651Z,1528873324.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:05.047Z,1528873325.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:05.446Z,1528873325.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:05.838Z,1528873325.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:06.238Z,1528873326.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:06.656Z,1528873326.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:07.056Z,1528873327.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:07.448Z,1528873327.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:07.839Z,1528873327.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:08.250Z,1528873328.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:08.652Z,1528873328.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:09.050Z,1528873329.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:09.455Z,1528873329.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:09.838Z,1528873329.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:10.237Z,1528873330.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:10.651Z,1528873330.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:11.050Z,1528873331.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:11.447Z,1528873331.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:11.847Z,1528873331.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:12.242Z,1528873332.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:12.652Z,1528873332.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:13.064Z,1528873333.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:13.452Z,1528873333.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:13.838Z,1528873333.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:14.239Z,1528873334.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:14.654Z,1528873334.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:15.051Z,1528873335.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:15.459Z,1528873335.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:15.854Z,1528873335.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:16.230Z,1528873336.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:16.650Z,1528873336.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:17.052Z,1528873337.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:17.461Z,1528873337.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:17.834Z,1528873337.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:18.228Z,1528873338.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:18.663Z,1528873338.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:19.068Z,1528873339.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:19.459Z,1528873339.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:19.832Z,1528873339.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:20.236Z,1528873340.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:20.640Z,1528873340.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:21.043Z,1528873341.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:21.443Z,1528873341.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:21.837Z,1528873341.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:22.236Z,1528873342.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:22.644Z,1528873342.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:23.048Z,1528873343.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:23.444Z,1528873343.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:23.848Z,1528873343.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:24.235Z,1528873344.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:24.644Z,1528873344.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:25.044Z,1528873345.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:25.447Z,1528873345.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:25.875Z,1528873345.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:26.240Z,1528873346.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:26.641Z,1528873346.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:27.043Z,1528873347.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:27.452Z,1528873347.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:27.838Z,1528873347.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:28.237Z,1528873348.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:28.646Z,1528873348.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:29.044Z,1528873349.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:29.443Z,1528873349.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:29.843Z,1528873349.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:30.237Z,1528873350.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:30.636Z,1528873350.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:31.045Z,1528873351.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:31.444Z,1528873351.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:31.844Z,1528873351.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:32.237Z,1528873352.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:32.640Z,1528873352.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:33.046Z,1528873353.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:33.445Z,1528873353.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:33.849Z,1528873353.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:34.248Z,1528873354.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:34.650Z,1528873354.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:35.037Z,1528873355.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:35.444Z,1528873355.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:35.843Z,1528873355.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:36.234Z,1528873356.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:36.637Z,1528873356.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:37.050Z,1528873357.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:37.447Z,1528873357.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:37.856Z,1528873357.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:38.248Z,1528873358.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:38.656Z,1528873358.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:39.040Z,1528873359.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:39.442Z,1528873359.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:42.512Z,1528873362.512 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T07:02:42.512Z,1528873362.512 [NAL9602] Data Fault, FailCount= 5
2018-06-13T07:02:42.512Z,1528873362.512 [NAL9602](ERROR): Data Fault
2018-06-13T07:02:42.562Z,1528873362.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:42.657Z,1528873362.657 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T07:02:42.657Z,1528873362.657 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T07:02:42.690Z,1528873362.690 [NAL9602](INFO): Powering down
2018-06-13T07:02:42.747Z,1528873362.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:42.831Z,1528873362.831 [CBIT](INFO): Critical error at 20180613T070242
2018-06-13T07:02:43.140Z,1528873363.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:43.513Z,1528873363.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:43.907Z,1528873363.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:44.308Z,1528873364.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:44.705Z,1528873364.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:45.110Z,1528873365.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:45.509Z,1528873365.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:45.906Z,1528873365.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:46.311Z,1528873366.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:46.709Z,1528873366.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:47.106Z,1528873367.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:47.511Z,1528873367.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:47.909Z,1528873367.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:48.307Z,1528873368.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:48.711Z,1528873368.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:49.110Z,1528873369.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:49.510Z,1528873369.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:49.911Z,1528873369.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:50.311Z,1528873370.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:50.712Z,1528873370.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:51.119Z,1528873371.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:51.521Z,1528873371.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:51.907Z,1528873371.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:52.324Z,1528873372.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:52.719Z,1528873372.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:53.113Z,1528873373.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:53.513Z,1528873373.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:53.917Z,1528873373.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:54.312Z,1528873374.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:54.716Z,1528873374.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:55.120Z,1528873375.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:55.507Z,1528873375.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:55.911Z,1528873375.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:56.319Z,1528873376.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:56.708Z,1528873376.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:57.121Z,1528873377.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:57.524Z,1528873377.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:57.900Z,1528873377.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:58.303Z,1528873378.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:58.704Z,1528873378.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:59.125Z,1528873379.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:59.503Z,1528873379.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:02:59.908Z,1528873379.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:00.308Z,1528873380.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:00.708Z,1528873380.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:01.108Z,1528873381.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:01.508Z,1528873381.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:01.908Z,1528873381.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:02.307Z,1528873382.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:02.708Z,1528873382.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:03.108Z,1528873383.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:03.513Z,1528873383.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:03.940Z,1528873383.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:04.310Z,1528873384.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:04.709Z,1528873384.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:05.108Z,1528873385.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:05.509Z,1528873385.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:05.908Z,1528873385.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:06.308Z,1528873386.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:06.710Z,1528873386.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:07.108Z,1528873387.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:07.505Z,1528873387.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:07.910Z,1528873387.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:08.308Z,1528873388.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:08.706Z,1528873388.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:09.110Z,1528873389.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:09.505Z,1528873389.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:09.905Z,1528873389.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:10.310Z,1528873390.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:10.709Z,1528873390.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:11.108Z,1528873391.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:11.511Z,1528873391.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:11.910Z,1528873391.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:12.308Z,1528873392.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:12.710Z,1528873392.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:13.120Z,1528873393.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:13.510Z,1528873393.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:13.914Z,1528873393.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:14.310Z,1528873394.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:14.709Z,1528873394.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:15.109Z,1528873395.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:15.510Z,1528873395.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:15.905Z,1528873395.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:16.316Z,1528873396.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:16.728Z,1528873396.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:17.109Z,1528873397.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:17.509Z,1528873397.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:17.910Z,1528873397.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:18.311Z,1528873398.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:18.709Z,1528873398.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:19.111Z,1528873399.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:19.506Z,1528873399.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:19.909Z,1528873399.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:20.310Z,1528873400.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:20.705Z,1528873400.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:21.110Z,1528873401.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:21.510Z,1528873401.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:21.909Z,1528873401.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:22.309Z,1528873402.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:22.710Z,1528873402.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:23.111Z,1528873403.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:23.509Z,1528873403.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:23.910Z,1528873403.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:24.310Z,1528873404.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:24.710Z,1528873404.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:25.110Z,1528873405.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:25.508Z,1528873405.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:25.910Z,1528873405.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:26.310Z,1528873406.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:26.706Z,1528873406.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:27.111Z,1528873407.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:27.507Z,1528873407.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:27.907Z,1528873407.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:28.310Z,1528873408.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:28.710Z,1528873408.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:29.113Z,1528873409.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:29.528Z,1528873409.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:29.912Z,1528873409.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:30.306Z,1528873410.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:30.712Z,1528873410.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:31.108Z,1528873411.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:31.511Z,1528873411.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:31.916Z,1528873411.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:32.312Z,1528873412.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:32.706Z,1528873412.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:33.110Z,1528873413.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:33.513Z,1528873413.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:33.905Z,1528873413.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:34.309Z,1528873414.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:34.712Z,1528873414.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:35.105Z,1528873415.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:35.512Z,1528873415.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:35.912Z,1528873415.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:36.306Z,1528873416.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:36.711Z,1528873416.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:37.112Z,1528873417.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:37.506Z,1528873417.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:37.910Z,1528873417.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:38.309Z,1528873418.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:41.456Z,1528873421.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:41.604Z,1528873421.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:42.018Z,1528873422.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:42.412Z,1528873422.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:42.804Z,1528873422.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:43.184Z,1528873423.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:43.588Z,1528873423.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:43.992Z,1528873423.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:44.387Z,1528873424.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:44.790Z,1528873424.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:45.191Z,1528873425.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:45.590Z,1528873425.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:45.990Z,1528873425.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:46.394Z,1528873426.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:46.791Z,1528873426.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:47.186Z,1528873427.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:47.594Z,1528873427.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:47.989Z,1528873427.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:48.390Z,1528873428.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:48.795Z,1528873428.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:49.189Z,1528873429.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:49.591Z,1528873429.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:49.994Z,1528873429.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:50.396Z,1528873430.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:50.788Z,1528873430.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:51.191Z,1528873431.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:51.592Z,1528873431.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:51.990Z,1528873431.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:52.389Z,1528873432.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:52.789Z,1528873432.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:53.208Z,1528873433.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:53.609Z,1528873433.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:53.988Z,1528873433.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:54.384Z,1528873434.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:54.813Z,1528873434.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:55.214Z,1528873435.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:55.588Z,1528873435.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:55.992Z,1528873435.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:56.387Z,1528873436.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:56.788Z,1528873436.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:57.188Z,1528873437.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:57.586Z,1528873437.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:57.987Z,1528873437.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:58.387Z,1528873438.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:58.786Z,1528873438.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:59.191Z,1528873439.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:59.590Z,1528873439.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:03:59.986Z,1528873439.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:00.390Z,1528873440.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:00.791Z,1528873440.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:01.187Z,1528873441.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:01.591Z,1528873441.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:01.991Z,1528873441.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:02.386Z,1528873442.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:02.791Z,1528873442.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:03.196Z,1528873443.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:03.586Z,1528873443.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:03.991Z,1528873443.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:04.390Z,1528873444.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:04.786Z,1528873444.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:05.196Z,1528873445.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:05.590Z,1528873445.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:05.991Z,1528873445.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:06.391Z,1528873446.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:06.790Z,1528873446.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:07.186Z,1528873447.186 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:07.186Z,1528873447.186 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73
2018-06-13T07:04:07.186Z,1528873447.186 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:04:07.188Z,1528873447.188 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:07.188Z,1528873447.188 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73
2018-06-13T07:04:07.188Z,1528873447.188 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:04:07.190Z,1528873447.190 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:07.190Z,1528873447.190 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 73
2018-06-13T07:04:07.190Z,1528873447.190 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:04:07.293Z,1528873447.293 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:04:07.293Z,1528873447.293 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:04:07.293Z,1528873447.293 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:04:07.669Z,1528873447.669 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:04:07.669Z,1528873447.669 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73
2018-06-13T07:04:07.670Z,1528873447.670 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:04:07.670Z,1528873447.670 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73
2018-06-13T07:04:07.670Z,1528873447.670 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:04:07.670Z,1528873447.670 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 73
2018-06-13T07:04:08.019Z,1528873448.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:04:08.019Z,1528873448.019 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:04:08.020Z,1528873448.020 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:04:08.020Z,1528873448.020 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:04:08.021Z,1528873448.021 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:04:08.021Z,1528873448.021 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:04:08.021Z,1528873448.021 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:04:08.022Z,1528873448.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:04:08.022Z,1528873448.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:04:08.396Z,1528873448.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:04:08.397Z,1528873448.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:08.789Z,1528873448.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:04:08.790Z,1528873448.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:09.190Z,1528873449.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:04:09.191Z,1528873449.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:09.588Z,1528873449.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:04:09.589Z,1528873449.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:09.996Z,1528873449.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:04:09.997Z,1528873449.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:10.390Z,1528873450.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:04:10.391Z,1528873450.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:10.789Z,1528873450.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:04:10.790Z,1528873450.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:11.190Z,1528873451.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:04:11.191Z,1528873451.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:11.592Z,1528873451.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:04:11.592Z,1528873451.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:11.996Z,1528873451.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:04:11.997Z,1528873451.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:12.389Z,1528873452.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:04:12.390Z,1528873452.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:12.791Z,1528873452.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:04:12.792Z,1528873452.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:13.200Z,1528873453.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:04:13.201Z,1528873453.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:13.588Z,1528873453.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:04:13.593Z,1528873453.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:14.001Z,1528873454.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:04:14.002Z,1528873454.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:14.405Z,1528873454.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:04:14.406Z,1528873454.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:14.789Z,1528873454.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:04:14.794Z,1528873454.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:15.184Z,1528873455.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:04:15.198Z,1528873455.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:15.584Z,1528873455.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:04:15.585Z,1528873455.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:15.987Z,1528873455.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:04:15.988Z,1528873455.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:16.387Z,1528873456.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:04:16.388Z,1528873456.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:16.787Z,1528873456.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:04:16.788Z,1528873456.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:17.213Z,1528873457.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:04:17.214Z,1528873457.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:17.588Z,1528873457.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:04:17.589Z,1528873457.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:17.987Z,1528873457.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:04:17.988Z,1528873457.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:18.387Z,1528873458.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:04:18.388Z,1528873458.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:18.787Z,1528873458.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:04:18.788Z,1528873458.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:19.186Z,1528873459.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:04:19.187Z,1528873459.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:19.588Z,1528873459.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:04:19.588Z,1528873459.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:19.987Z,1528873459.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:04:19.988Z,1528873459.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:20.393Z,1528873460.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:04:20.394Z,1528873460.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:20.820Z,1528873460.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:04:20.820Z,1528873460.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:21.187Z,1528873461.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:04:21.188Z,1528873461.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:21.587Z,1528873461.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:04:21.588Z,1528873461.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:21.988Z,1528873461.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:04:21.990Z,1528873461.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:22.391Z,1528873462.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:04:22.392Z,1528873462.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:22.795Z,1528873462.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:04:22.796Z,1528873462.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:23.191Z,1528873463.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:04:23.191Z,1528873463.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:23.587Z,1528873463.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:04:23.588Z,1528873463.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:23.989Z,1528873463.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:04:23.990Z,1528873463.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:24.387Z,1528873464.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:04:24.388Z,1528873464.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:24.791Z,1528873464.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:04:24.792Z,1528873464.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:25.198Z,1528873465.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:04:25.199Z,1528873465.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:25.586Z,1528873465.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:04:25.587Z,1528873465.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:25.990Z,1528873465.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:04:25.991Z,1528873465.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:26.389Z,1528873466.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:04:26.390Z,1528873466.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:26.785Z,1528873466.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:04:26.786Z,1528873466.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:27.191Z,1528873467.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:27.605Z,1528873467.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:27.987Z,1528873467.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:28.391Z,1528873468.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:28.796Z,1528873468.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:29.191Z,1528873469.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:29.591Z,1528873469.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:29.993Z,1528873469.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:30.390Z,1528873470.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:30.790Z,1528873470.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:31.190Z,1528873471.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:31.590Z,1528873471.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:31.991Z,1528873471.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:32.402Z,1528873472.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:32.789Z,1528873472.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:33.200Z,1528873473.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:33.595Z,1528873473.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:34.004Z,1528873474.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:34.391Z,1528873474.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:34.800Z,1528873474.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:35.187Z,1528873475.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:35.591Z,1528873475.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:35.996Z,1528873475.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:36.390Z,1528873476.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:36.799Z,1528873476.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:37.197Z,1528873477.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:37.596Z,1528873477.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:37.995Z,1528873477.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:38.392Z,1528873478.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:41.506Z,1528873481.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:41.660Z,1528873481.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:42.043Z,1528873482.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:42.439Z,1528873482.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:42.526Z,1528873482.526 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T07:04:42.526Z,1528873482.526 [NAL9602] No Fault, FailCount= 5
2018-06-13T07:04:42.790Z,1528873482.790 [NAL9602](INFO): Powering up NAL9602
2018-06-13T07:04:42.837Z,1528873482.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:43.240Z,1528873483.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:43.628Z,1528873483.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:44.029Z,1528873484.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:44.432Z,1528873484.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:44.832Z,1528873484.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:45.251Z,1528873485.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:45.632Z,1528873485.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:46.053Z,1528873486.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:46.438Z,1528873486.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:46.868Z,1528873486.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:47.233Z,1528873487.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:47.631Z,1528873487.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:48.036Z,1528873488.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:48.431Z,1528873488.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:48.831Z,1528873488.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:49.231Z,1528873489.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:49.630Z,1528873489.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:50.031Z,1528873490.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:50.430Z,1528873490.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:50.830Z,1528873490.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:51.231Z,1528873491.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:51.635Z,1528873491.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:52.029Z,1528873492.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:52.431Z,1528873492.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:52.831Z,1528873492.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:53.238Z,1528873493.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:53.598Z,1528873493.598 [NAL9602](INFO): NAL9602 initialized
2018-06-13T07:04:53.633Z,1528873493.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:54.034Z,1528873494.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:54.439Z,1528873494.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:54.843Z,1528873494.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:55.240Z,1528873495.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:55.633Z,1528873495.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:56.036Z,1528873496.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:56.435Z,1528873496.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:56.839Z,1528873496.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:57.243Z,1528873497.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:57.640Z,1528873497.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:58.032Z,1528873498.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:58.435Z,1528873498.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:58.835Z,1528873498.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:59.233Z,1528873499.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:04:59.656Z,1528873499.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:00.072Z,1528873500.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:00.440Z,1528873500.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:00.834Z,1528873500.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:01.234Z,1528873501.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:01.635Z,1528873501.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:02.034Z,1528873502.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:02.434Z,1528873502.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:02.838Z,1528873502.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:03.244Z,1528873503.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:03.640Z,1528873503.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:04.034Z,1528873504.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:04.434Z,1528873504.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:04.838Z,1528873504.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:05.233Z,1528873505.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:05.639Z,1528873505.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:06.043Z,1528873506.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:06.439Z,1528873506.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:06.839Z,1528873506.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:07.244Z,1528873507.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:07.632Z,1528873507.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:08.046Z,1528873508.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:08.435Z,1528873508.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:08.845Z,1528873508.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:09.245Z,1528873509.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:09.644Z,1528873509.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:10.040Z,1528873510.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:10.437Z,1528873510.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:10.840Z,1528873510.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:11.236Z,1528873511.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:11.638Z,1528873511.638 [BPC1](ERROR): Failed to parse Bank A battery data
2018-06-13T07:05:11.647Z,1528873511.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:12.079Z,1528873512.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:12.449Z,1528873512.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:12.837Z,1528873512.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:13.238Z,1528873513.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:13.647Z,1528873513.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:14.038Z,1528873514.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:14.438Z,1528873514.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:14.846Z,1528873514.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:15.247Z,1528873515.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:15.645Z,1528873515.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:16.033Z,1528873516.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:16.436Z,1528873516.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:16.842Z,1528873516.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:17.233Z,1528873517.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:17.645Z,1528873517.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:18.047Z,1528873518.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:18.445Z,1528873518.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:18.837Z,1528873518.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:19.243Z,1528873519.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:19.636Z,1528873519.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:20.033Z,1528873520.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:20.435Z,1528873520.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:20.849Z,1528873520.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:21.247Z,1528873521.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:21.652Z,1528873521.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:22.033Z,1528873522.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:22.444Z,1528873522.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:22.850Z,1528873522.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:23.242Z,1528873523.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:23.646Z,1528873523.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:24.049Z,1528873524.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:24.483Z,1528873524.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:24.848Z,1528873524.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:25.241Z,1528873525.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:25.641Z,1528873525.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:26.045Z,1528873526.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:26.447Z,1528873526.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:26.851Z,1528873526.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:27.249Z,1528873527.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:27.656Z,1528873527.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:28.037Z,1528873528.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:28.445Z,1528873528.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:28.830Z,1528873528.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:29.228Z,1528873529.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:29.658Z,1528873529.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:30.056Z,1528873530.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:30.457Z,1528873530.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:30.844Z,1528873530.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:31.257Z,1528873531.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:31.632Z,1528873531.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:32.034Z,1528873532.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:32.432Z,1528873532.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:32.860Z,1528873532.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:33.264Z,1528873533.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:33.643Z,1528873533.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:34.032Z,1528873534.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:34.435Z,1528873534.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:34.842Z,1528873534.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:35.235Z,1528873535.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:35.667Z,1528873535.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:36.041Z,1528873536.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:36.441Z,1528873536.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:36.846Z,1528873536.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:37.243Z,1528873537.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:37.648Z,1528873537.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:38.037Z,1528873538.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:38.435Z,1528873538.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:41.577Z,1528873541.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:41.752Z,1528873541.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:42.127Z,1528873542.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:42.530Z,1528873542.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:42.905Z,1528873542.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:43.309Z,1528873543.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:43.732Z,1528873543.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:44.132Z,1528873544.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:44.535Z,1528873544.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:44.909Z,1528873544.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:45.307Z,1528873545.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:45.709Z,1528873545.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:46.109Z,1528873546.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:46.509Z,1528873546.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:46.932Z,1528873546.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:47.336Z,1528873547.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:47.740Z,1528873547.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:48.112Z,1528873548.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:48.511Z,1528873548.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:48.914Z,1528873548.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:49.313Z,1528873549.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:49.719Z,1528873549.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:50.124Z,1528873550.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:50.560Z,1528873550.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:50.941Z,1528873550.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:51.311Z,1528873551.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:51.730Z,1528873551.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:52.119Z,1528873552.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:52.518Z,1528873552.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:52.925Z,1528873552.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:53.368Z,1528873553.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:53.725Z,1528873553.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:54.124Z,1528873554.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:54.522Z,1528873554.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:54.920Z,1528873554.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:55.324Z,1528873555.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:55.729Z,1528873555.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:56.129Z,1528873556.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:56.528Z,1528873556.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:56.920Z,1528873556.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:57.329Z,1528873557.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:57.734Z,1528873557.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:58.105Z,1528873558.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:58.532Z,1528873558.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:58.915Z,1528873558.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:59.338Z,1528873559.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:05:59.719Z,1528873559.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:00.111Z,1528873560.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:00.510Z,1528873560.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:00.911Z,1528873560.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:01.311Z,1528873561.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:01.720Z,1528873561.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:02.123Z,1528873562.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:02.524Z,1528873562.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:02.914Z,1528873562.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:03.319Z,1528873563.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:03.732Z,1528873563.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:04.116Z,1528873564.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:04.515Z,1528873564.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:04.924Z,1528873564.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:05.323Z,1528873565.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:05.724Z,1528873565.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:06.116Z,1528873566.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:06.514Z,1528873566.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:06.915Z,1528873566.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:07.320Z,1528873567.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:07.723Z,1528873567.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:08.124Z,1528873568.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:08.528Z,1528873568.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:08.916Z,1528873568.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:09.315Z,1528873569.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:09.720Z,1528873569.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:10.116Z,1528873570.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:10.514Z,1528873570.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:10.928Z,1528873570.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:11.328Z,1528873571.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:11.725Z,1528873571.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:12.115Z,1528873572.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:12.516Z,1528873572.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:12.913Z,1528873572.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:13.324Z,1528873573.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:13.726Z,1528873573.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:14.128Z,1528873574.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:14.524Z,1528873574.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:14.916Z,1528873574.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:15.314Z,1528873575.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:15.715Z,1528873575.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:16.115Z,1528873576.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:16.520Z,1528873576.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:16.926Z,1528873576.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:17.332Z,1528873577.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:17.724Z,1528873577.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:18.115Z,1528873578.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:18.521Z,1528873578.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:18.926Z,1528873578.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:19.328Z,1528873579.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:19.729Z,1528873579.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:20.129Z,1528873580.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:20.532Z,1528873580.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:20.918Z,1528873580.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:21.324Z,1528873581.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:21.702Z,1528873581.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:22.105Z,1528873582.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:22.521Z,1528873582.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:22.937Z,1528873582.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:23.319Z,1528873583.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:23.724Z,1528873583.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:24.109Z,1528873584.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:24.508Z,1528873584.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:24.911Z,1528873584.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:25.316Z,1528873585.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:25.716Z,1528873585.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:26.119Z,1528873586.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:26.520Z,1528873586.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:26.907Z,1528873586.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:27.309Z,1528873587.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:27.710Z,1528873587.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:28.108Z,1528873588.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:28.509Z,1528873588.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:28.919Z,1528873588.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:29.319Z,1528873589.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:29.720Z,1528873589.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:30.111Z,1528873590.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:30.508Z,1528873590.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:30.912Z,1528873590.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:31.310Z,1528873591.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:31.715Z,1528873591.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:32.119Z,1528873592.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:32.515Z,1528873592.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:32.908Z,1528873592.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:33.312Z,1528873593.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:33.711Z,1528873593.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:34.108Z,1528873594.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:34.513Z,1528873594.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:34.947Z,1528873594.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:35.319Z,1528873595.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:35.719Z,1528873595.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:36.111Z,1528873596.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:36.511Z,1528873596.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:36.910Z,1528873596.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:37.311Z,1528873597.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:37.715Z,1528873597.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:38.123Z,1528873598.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:38.143Z,1528873598.143 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T07:06:38.143Z,1528873598.143 [Default:CheckIn:C.Wait] Stopped
2018-06-13T07:06:38.143Z,1528873598.143 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T07:06:38.143Z,1528873598.143 [Default:CheckIn:D] Running Loop=1
2018-06-13T07:06:38.523Z,1528873598.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:38.527Z,1528873598.527 [Default:CheckIn:D] Stopped
2018-06-13T07:06:38.527Z,1528873598.527 [Default:CheckIn:E] Running Loop=1
2018-06-13T07:06:41.624Z,1528873601.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:41.627Z,1528873601.627 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 219.418034 min 
2018-06-13T07:06:41.627Z,1528873601.627 [Default:CheckIn:E] Stopped
2018-06-13T07:06:41.628Z,1528873601.628 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T07:06:41.628Z,1528873601.628 [Default:CheckIn] Stopped
2018-06-13T07:06:41.628Z,1528873601.628 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T07:06:41.628Z,1528873601.628 [Default:CheckIn](INFO): Running loop #22
2018-06-13T07:06:41.628Z,1528873601.628 [Default:CheckIn] Running Loop=22
2018-06-13T07:06:41.628Z,1528873601.628 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T07:06:41.628Z,1528873601.628 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T07:06:41.802Z,1528873601.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:42.180Z,1528873602.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:42.580Z,1528873602.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:42.980Z,1528873602.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:43.372Z,1528873603.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:43.767Z,1528873603.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:44.172Z,1528873604.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:44.572Z,1528873604.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:44.981Z,1528873604.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:45.380Z,1528873605.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:45.780Z,1528873605.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:46.171Z,1528873606.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:46.577Z,1528873606.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:46.975Z,1528873606.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:47.368Z,1528873607.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:47.780Z,1528873607.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:48.184Z,1528873608.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:48.581Z,1528873608.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:48.972Z,1528873608.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:49.375Z,1528873609.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:49.772Z,1528873609.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:50.172Z,1528873610.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:50.572Z,1528873610.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:50.981Z,1528873610.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:51.380Z,1528873611.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:51.780Z,1528873611.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:52.168Z,1528873612.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:52.570Z,1528873612.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:52.975Z,1528873612.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:53.367Z,1528873613.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:53.784Z,1528873613.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:54.184Z,1528873614.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:54.581Z,1528873614.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:54.972Z,1528873614.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:55.381Z,1528873615.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:55.777Z,1528873615.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:56.178Z,1528873616.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:56.580Z,1528873616.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:56.987Z,1528873616.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:57.384Z,1528873617.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:57.782Z,1528873617.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:58.173Z,1528873618.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:58.584Z,1528873618.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:58.979Z,1528873618.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:59.364Z,1528873619.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:06:59.787Z,1528873619.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:00.189Z,1528873620.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:00.587Z,1528873620.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:00.964Z,1528873620.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:01.381Z,1528873621.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:01.768Z,1528873621.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:02.172Z,1528873622.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:02.568Z,1528873622.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:02.975Z,1528873622.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:03.379Z,1528873623.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:03.805Z,1528873623.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:04.171Z,1528873624.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:04.570Z,1528873624.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:04.974Z,1528873624.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:05.368Z,1528873625.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:05.776Z,1528873625.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:06.179Z,1528873626.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:06.579Z,1528873626.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:06.974Z,1528873626.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:07.383Z,1528873627.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:07.769Z,1528873627.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:08.178Z,1528873628.178 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:08.178Z,1528873628.178 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74
2018-06-13T07:07:08.178Z,1528873628.178 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:07:08.180Z,1528873628.180 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:08.180Z,1528873628.180 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74
2018-06-13T07:07:08.180Z,1528873628.180 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:07:08.186Z,1528873628.186 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:08.186Z,1528873628.186 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 74
2018-06-13T07:07:08.186Z,1528873628.186 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:07:08.269Z,1528873628.269 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:07:08.269Z,1528873628.269 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:07:08.270Z,1528873628.270 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:07:08.661Z,1528873628.661 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:07:08.661Z,1528873628.661 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74
2018-06-13T07:07:08.662Z,1528873628.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:07:08.662Z,1528873628.662 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74
2018-06-13T07:07:08.662Z,1528873628.662 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:07:08.662Z,1528873628.662 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 74
2018-06-13T07:07:08.982Z,1528873628.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:07:08.983Z,1528873628.983 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:07:08.983Z,1528873628.983 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:07:08.983Z,1528873628.983 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:07:08.984Z,1528873628.984 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:07:08.984Z,1528873628.984 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:07:08.985Z,1528873628.985 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:07:08.985Z,1528873628.985 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:07:08.985Z,1528873628.985 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:07:09.383Z,1528873629.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:07:09.384Z,1528873629.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:09.782Z,1528873629.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:07:09.783Z,1528873629.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:10.180Z,1528873630.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:07:10.182Z,1528873630.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:10.573Z,1528873630.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:07:10.574Z,1528873630.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:10.988Z,1528873630.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:07:10.989Z,1528873630.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:11.375Z,1528873631.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:07:11.376Z,1528873631.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:11.781Z,1528873631.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:07:11.782Z,1528873631.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:12.186Z,1528873632.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:07:12.186Z,1528873632.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:12.584Z,1528873632.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:07:12.585Z,1528873632.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:12.984Z,1528873632.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:07:12.989Z,1528873632.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:13.383Z,1528873633.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:07:13.384Z,1528873633.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:13.760Z,1528873633.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:07:13.769Z,1528873633.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:14.164Z,1528873634.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:07:14.182Z,1528873634.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:14.564Z,1528873634.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:07:14.565Z,1528873634.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:14.994Z,1528873634.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:07:14.995Z,1528873634.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:15.401Z,1528873635.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:07:15.402Z,1528873635.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:15.795Z,1528873635.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:07:15.796Z,1528873635.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:16.168Z,1528873636.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:07:16.168Z,1528873636.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:16.576Z,1528873636.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:07:16.577Z,1528873636.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:16.981Z,1528873636.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:07:16.982Z,1528873636.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:17.368Z,1528873637.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:07:17.368Z,1528873637.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:17.776Z,1528873637.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:07:17.777Z,1528873637.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:18.180Z,1528873638.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:07:18.180Z,1528873638.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:18.576Z,1528873638.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:07:18.577Z,1528873638.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:18.984Z,1528873638.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:07:18.989Z,1528873638.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:19.374Z,1528873639.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:07:19.375Z,1528873639.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:19.767Z,1528873639.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:07:19.768Z,1528873639.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:20.183Z,1528873640.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:07:20.184Z,1528873640.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:20.571Z,1528873640.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:07:20.572Z,1528873640.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:20.981Z,1528873640.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:07:20.982Z,1528873640.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:21.384Z,1528873641.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:07:21.385Z,1528873641.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:21.780Z,1528873641.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:07:21.782Z,1528873641.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:22.167Z,1528873642.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:07:22.168Z,1528873642.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:22.570Z,1528873642.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:07:22.571Z,1528873642.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:22.978Z,1528873642.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:07:22.979Z,1528873642.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:23.369Z,1528873643.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:07:23.370Z,1528873643.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:23.783Z,1528873643.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:07:23.784Z,1528873643.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:24.188Z,1528873644.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:07:24.190Z,1528873644.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:24.581Z,1528873644.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:07:24.582Z,1528873644.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:24.973Z,1528873644.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:07:24.974Z,1528873644.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:25.370Z,1528873645.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:07:25.371Z,1528873645.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:25.778Z,1528873645.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:07:25.779Z,1528873645.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:26.172Z,1528873646.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:07:26.174Z,1528873646.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:26.570Z,1528873646.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:07:26.571Z,1528873646.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:26.982Z,1528873646.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:07:26.983Z,1528873646.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:27.383Z,1528873647.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:07:27.383Z,1528873647.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:27.784Z,1528873647.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:07:27.785Z,1528873647.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:28.169Z,1528873648.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T07:07:28.170Z,1528873648.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:28.570Z,1528873648.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:28.981Z,1528873648.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:29.369Z,1528873649.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:29.785Z,1528873649.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:30.185Z,1528873650.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:30.581Z,1528873650.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:30.972Z,1528873650.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:31.374Z,1528873651.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:31.770Z,1528873651.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:32.173Z,1528873652.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:32.583Z,1528873652.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:32.981Z,1528873652.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:33.384Z,1528873653.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:33.782Z,1528873653.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:34.169Z,1528873654.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:34.573Z,1528873654.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:34.977Z,1528873654.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:35.369Z,1528873655.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:35.785Z,1528873655.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:36.185Z,1528873656.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:36.582Z,1528873656.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:36.972Z,1528873656.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:37.384Z,1528873657.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:37.769Z,1528873657.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:38.176Z,1528873658.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:38.575Z,1528873658.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:38.986Z,1528873658.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:39.392Z,1528873659.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:39.784Z,1528873659.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:42.889Z,1528873662.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:43.048Z,1528873663.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:43.435Z,1528873663.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:43.837Z,1528873663.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:44.238Z,1528873664.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:44.634Z,1528873664.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:45.031Z,1528873665.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:45.438Z,1528873665.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:45.834Z,1528873665.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:46.235Z,1528873666.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:46.645Z,1528873666.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:47.041Z,1528873667.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:47.431Z,1528873667.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:47.825Z,1528873667.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:48.227Z,1528873668.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:48.626Z,1528873668.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:49.044Z,1528873669.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:49.439Z,1528873669.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:49.834Z,1528873669.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:50.234Z,1528873670.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:50.637Z,1528873670.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:51.033Z,1528873671.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:51.432Z,1528873671.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:51.842Z,1528873671.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:52.243Z,1528873672.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:52.637Z,1528873672.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:53.034Z,1528873673.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:53.418Z,1528873673.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:53.822Z,1528873673.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:54.223Z,1528873674.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:54.617Z,1528873674.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:55.050Z,1528873675.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:55.448Z,1528873675.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:55.832Z,1528873675.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:56.228Z,1528873676.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:56.622Z,1528873676.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:57.025Z,1528873677.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:57.422Z,1528873677.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:57.827Z,1528873677.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:58.228Z,1528873678.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:58.628Z,1528873678.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:59.023Z,1528873679.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:59.420Z,1528873679.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:07:59.824Z,1528873679.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:00.228Z,1528873680.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:00.620Z,1528873680.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:01.029Z,1528873681.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:01.432Z,1528873681.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:01.828Z,1528873681.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:02.223Z,1528873682.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:02.622Z,1528873682.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:03.020Z,1528873683.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:03.420Z,1528873683.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:03.832Z,1528873683.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:04.227Z,1528873684.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:04.628Z,1528873684.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:05.021Z,1528873685.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:05.420Z,1528873685.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:05.821Z,1528873685.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:06.222Z,1528873686.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:06.620Z,1528873686.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:07.028Z,1528873687.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:07.431Z,1528873687.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:07.828Z,1528873687.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:08.222Z,1528873688.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:08.622Z,1528873688.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:09.024Z,1528873689.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:09.419Z,1528873689.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:09.827Z,1528873689.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:10.231Z,1528873690.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:10.631Z,1528873690.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:11.021Z,1528873691.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:11.423Z,1528873691.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:11.822Z,1528873691.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:12.223Z,1528873692.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:12.623Z,1528873692.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:13.028Z,1528873693.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:13.431Z,1528873693.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:13.827Z,1528873693.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:14.228Z,1528873694.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:14.622Z,1528873694.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:15.024Z,1528873695.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:15.423Z,1528873695.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:15.827Z,1528873695.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:16.236Z,1528873696.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:16.628Z,1528873696.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:17.021Z,1528873697.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:17.425Z,1528873697.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:17.822Z,1528873697.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:18.222Z,1528873698.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:18.624Z,1528873698.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:19.032Z,1528873699.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:19.440Z,1528873699.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:19.833Z,1528873699.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:20.232Z,1528873700.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:20.627Z,1528873700.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:21.025Z,1528873701.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:21.425Z,1528873701.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:21.840Z,1528873701.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:22.234Z,1528873702.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:22.632Z,1528873702.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:23.024Z,1528873703.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:23.425Z,1528873703.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:23.825Z,1528873703.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:24.240Z,1528873704.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:24.624Z,1528873704.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:25.035Z,1528873705.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:25.432Z,1528873705.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:25.840Z,1528873705.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:26.225Z,1528873706.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:26.627Z,1528873706.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:27.031Z,1528873707.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:27.425Z,1528873707.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:27.832Z,1528873707.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:28.233Z,1528873708.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:28.632Z,1528873708.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:29.037Z,1528873709.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:29.424Z,1528873709.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:29.833Z,1528873709.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:30.234Z,1528873710.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:30.634Z,1528873710.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:31.035Z,1528873711.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:31.439Z,1528873711.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:31.838Z,1528873711.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:32.243Z,1528873712.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:32.640Z,1528873712.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:33.031Z,1528873713.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:33.428Z,1528873713.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:33.838Z,1528873713.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:34.244Z,1528873714.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:34.641Z,1528873714.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:35.041Z,1528873715.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:35.430Z,1528873715.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:35.835Z,1528873715.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:36.252Z,1528873716.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:36.640Z,1528873716.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:37.028Z,1528873717.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:37.436Z,1528873717.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:37.835Z,1528873717.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:38.243Z,1528873718.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:38.640Z,1528873718.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:39.031Z,1528873719.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:39.430Z,1528873719.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:39.842Z,1528873719.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:42.947Z,1528873722.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:43.124Z,1528873723.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:43.496Z,1528873723.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:43.894Z,1528873723.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:44.294Z,1528873724.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:44.695Z,1528873724.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:45.099Z,1528873725.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:45.503Z,1528873725.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:45.900Z,1528873725.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:46.292Z,1528873726.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:46.694Z,1528873726.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:47.095Z,1528873727.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:47.492Z,1528873727.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:47.900Z,1528873727.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:48.304Z,1528873728.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:48.704Z,1528873728.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:49.094Z,1528873729.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:49.496Z,1528873729.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:49.891Z,1528873729.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:50.294Z,1528873730.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:50.694Z,1528873730.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:51.099Z,1528873731.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:51.508Z,1528873731.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:51.900Z,1528873731.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:52.294Z,1528873732.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:52.693Z,1528873732.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:53.094Z,1528873733.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:53.491Z,1528873733.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:53.903Z,1528873733.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:54.303Z,1528873734.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:54.704Z,1528873734.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:55.092Z,1528873735.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:55.500Z,1528873735.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:55.891Z,1528873735.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:56.296Z,1528873736.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:56.694Z,1528873736.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:57.099Z,1528873737.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:57.503Z,1528873737.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:57.900Z,1528873737.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:58.295Z,1528873738.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:58.693Z,1528873738.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:59.110Z,1528873739.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:59.491Z,1528873739.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:08:59.903Z,1528873739.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:00.304Z,1528873740.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:00.700Z,1528873740.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:01.095Z,1528873741.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:01.494Z,1528873741.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:01.891Z,1528873741.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:02.295Z,1528873742.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:02.698Z,1528873742.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:03.101Z,1528873743.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:03.499Z,1528873743.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:03.900Z,1528873743.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:04.291Z,1528873744.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:04.696Z,1528873744.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:05.096Z,1528873745.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:05.492Z,1528873745.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:05.908Z,1528873745.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:06.308Z,1528873746.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:06.704Z,1528873746.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:07.096Z,1528873747.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:07.498Z,1528873747.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:07.892Z,1528873747.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:08.296Z,1528873748.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:08.698Z,1528873748.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:09.104Z,1528873749.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:09.508Z,1528873749.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:09.908Z,1528873749.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:10.291Z,1528873750.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:10.696Z,1528873750.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:11.099Z,1528873751.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:11.491Z,1528873751.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:11.905Z,1528873751.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:12.308Z,1528873752.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:12.705Z,1528873752.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:13.095Z,1528873753.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:13.498Z,1528873753.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:13.892Z,1528873753.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:14.294Z,1528873754.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:14.699Z,1528873754.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:15.106Z,1528873755.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:15.507Z,1528873755.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:15.912Z,1528873755.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:16.297Z,1528873756.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:16.698Z,1528873756.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:17.100Z,1528873757.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:17.494Z,1528873757.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:17.904Z,1528873757.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:18.312Z,1528873758.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:18.706Z,1528873758.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:19.097Z,1528873759.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:19.496Z,1528873759.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:19.905Z,1528873759.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:20.305Z,1528873760.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:20.704Z,1528873760.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:21.092Z,1528873761.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:21.495Z,1528873761.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:21.912Z,1528873761.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:22.312Z,1528873762.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:22.708Z,1528873762.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:23.099Z,1528873763.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:23.492Z,1528873763.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:23.908Z,1528873763.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:24.312Z,1528873764.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:24.705Z,1528873764.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:25.102Z,1528873765.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:25.499Z,1528873765.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:25.906Z,1528873765.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:26.308Z,1528873766.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:26.712Z,1528873766.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:27.106Z,1528873767.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:27.497Z,1528873767.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:27.912Z,1528873767.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:28.306Z,1528873768.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:28.706Z,1528873768.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:29.102Z,1528873769.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:29.502Z,1528873769.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:29.909Z,1528873769.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:30.310Z,1528873770.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:30.706Z,1528873770.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:31.098Z,1528873771.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:31.498Z,1528873771.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:31.909Z,1528873771.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:32.309Z,1528873772.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:32.712Z,1528873772.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:33.113Z,1528873773.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:33.502Z,1528873773.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:33.910Z,1528873773.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:34.309Z,1528873774.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:34.716Z,1528873774.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:35.106Z,1528873775.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:35.484Z,1528873775.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:35.916Z,1528873775.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:36.320Z,1528873776.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:36.711Z,1528873776.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:37.105Z,1528873777.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:37.488Z,1528873777.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:37.916Z,1528873777.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:38.320Z,1528873778.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:38.726Z,1528873778.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:41.823Z,1528873781.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:41.976Z,1528873781.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:42.377Z,1528873782.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:42.778Z,1528873782.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:43.187Z,1528873783.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:43.579Z,1528873783.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:43.953Z,1528873783.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:44.373Z,1528873784.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:44.756Z,1528873784.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:45.184Z,1528873785.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:45.583Z,1528873785.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:45.988Z,1528873785.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:46.360Z,1528873786.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:46.772Z,1528873786.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:47.161Z,1528873787.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:47.555Z,1528873787.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:47.984Z,1528873787.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:48.386Z,1528873788.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:48.785Z,1528873788.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:49.159Z,1528873789.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:49.560Z,1528873789.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:49.955Z,1528873789.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:50.364Z,1528873790.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:50.760Z,1528873790.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:51.179Z,1528873791.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:51.587Z,1528873791.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:51.971Z,1528873791.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:52.359Z,1528873792.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:52.762Z,1528873792.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:53.162Z,1528873793.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:53.559Z,1528873793.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:53.971Z,1528873793.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:54.371Z,1528873794.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:54.767Z,1528873794.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:55.162Z,1528873795.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:55.563Z,1528873795.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:55.971Z,1528873795.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:56.376Z,1528873796.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:56.767Z,1528873796.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:57.160Z,1528873797.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:57.575Z,1528873797.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:57.968Z,1528873797.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:58.367Z,1528873798.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:58.767Z,1528873798.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:59.162Z,1528873799.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:59.560Z,1528873799.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:09:59.967Z,1528873799.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:00.395Z,1528873800.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:00.768Z,1528873800.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:01.168Z,1528873801.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:01.567Z,1528873801.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:01.973Z,1528873801.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:02.374Z,1528873802.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:02.771Z,1528873802.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:03.161Z,1528873803.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:03.563Z,1528873803.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:03.973Z,1528873803.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:04.380Z,1528873804.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:04.776Z,1528873804.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:05.168Z,1528873805.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:05.559Z,1528873805.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:05.977Z,1528873805.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:06.376Z,1528873806.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:06.772Z,1528873806.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:07.164Z,1528873807.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:07.568Z,1528873807.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:07.980Z,1528873807.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:08.372Z,1528873808.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:08.776Z,1528873808.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:09.166Z,1528873809.166 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:09.166Z,1528873809.166 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75
2018-06-13T07:10:09.166Z,1528873809.166 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:10:09.168Z,1528873809.168 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:09.168Z,1528873809.168 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75
2018-06-13T07:10:09.168Z,1528873809.168 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:10:09.170Z,1528873809.170 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:09.170Z,1528873809.170 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 75
2018-06-13T07:10:09.170Z,1528873809.170 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:10:09.249Z,1528873809.249 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:10:09.249Z,1528873809.249 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:10:09.250Z,1528873809.250 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:10:09.646Z,1528873809.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:10:09.646Z,1528873809.646 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75
2018-06-13T07:10:09.646Z,1528873809.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:10:09.647Z,1528873809.647 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75
2018-06-13T07:10:09.647Z,1528873809.647 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:10:09.647Z,1528873809.647 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 75
2018-06-13T07:10:09.973Z,1528873809.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:10:09.973Z,1528873809.973 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:10:09.973Z,1528873809.973 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:10:09.974Z,1528873809.974 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:10:09.974Z,1528873809.974 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:10:09.975Z,1528873809.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:10:09.975Z,1528873809.975 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:10:09.975Z,1528873809.975 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:10:09.976Z,1528873809.976 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:10:10.374Z,1528873810.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:10:10.375Z,1528873810.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:10.778Z,1528873810.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:10:10.779Z,1528873810.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:11.172Z,1528873811.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:10:11.173Z,1528873811.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:11.565Z,1528873811.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:10:11.566Z,1528873811.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:11.977Z,1528873811.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:10:11.978Z,1528873811.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:12.376Z,1528873812.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:10:12.377Z,1528873812.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:12.774Z,1528873812.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:10:12.774Z,1528873812.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:13.165Z,1528873813.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:10:13.166Z,1528873813.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:13.571Z,1528873813.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:10:13.572Z,1528873813.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:13.974Z,1528873813.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:10:13.975Z,1528873813.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:14.376Z,1528873814.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:10:14.377Z,1528873814.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:14.775Z,1528873814.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:10:14.776Z,1528873814.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:15.166Z,1528873815.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:10:15.166Z,1528873815.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:15.563Z,1528873815.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:10:15.564Z,1528873815.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:15.973Z,1528873815.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:10:15.974Z,1528873815.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:16.377Z,1528873816.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:10:16.378Z,1528873816.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:16.780Z,1528873816.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:10:16.782Z,1528873816.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:17.166Z,1528873817.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:10:17.167Z,1528873817.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:17.565Z,1528873817.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:10:17.566Z,1528873817.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:17.973Z,1528873817.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:10:17.974Z,1528873817.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:18.375Z,1528873818.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:10:18.376Z,1528873818.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:18.780Z,1528873818.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:10:18.781Z,1528873818.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:19.164Z,1528873819.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:10:19.166Z,1528873819.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:19.571Z,1528873819.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:10:19.572Z,1528873819.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:19.977Z,1528873819.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:10:19.978Z,1528873819.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:20.376Z,1528873820.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:10:20.377Z,1528873820.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:20.776Z,1528873820.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:10:20.777Z,1528873820.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:21.166Z,1528873821.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:10:21.167Z,1528873821.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:21.565Z,1528873821.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:10:21.566Z,1528873821.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:21.972Z,1528873821.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:10:21.973Z,1528873821.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:22.377Z,1528873822.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:10:22.378Z,1528873822.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:22.776Z,1528873822.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:10:22.777Z,1528873822.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:23.171Z,1528873823.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:10:23.172Z,1528873823.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:23.571Z,1528873823.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:10:23.572Z,1528873823.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:23.976Z,1528873823.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:10:23.977Z,1528873823.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:24.376Z,1528873824.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:10:24.377Z,1528873824.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:24.777Z,1528873824.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:10:24.778Z,1528873824.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:25.165Z,1528873825.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:10:25.166Z,1528873825.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:25.566Z,1528873825.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:10:25.567Z,1528873825.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:25.978Z,1528873825.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:10:25.978Z,1528873825.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:26.380Z,1528873826.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:10:26.382Z,1528873826.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:26.772Z,1528873826.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:10:26.773Z,1528873826.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:27.166Z,1528873827.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:10:27.167Z,1528873827.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:27.564Z,1528873827.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:10:27.565Z,1528873827.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:27.972Z,1528873827.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:10:27.974Z,1528873827.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:28.378Z,1528873828.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:10:28.379Z,1528873828.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:28.772Z,1528873828.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:10:28.773Z,1528873828.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:29.168Z,1528873829.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:29.565Z,1528873829.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:29.973Z,1528873829.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:30.378Z,1528873830.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:30.778Z,1528873830.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:31.165Z,1528873831.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:31.566Z,1528873831.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:31.978Z,1528873831.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:32.377Z,1528873832.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:32.773Z,1528873832.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:33.172Z,1528873833.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:33.572Z,1528873833.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:33.977Z,1528873833.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:34.384Z,1528873834.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:34.774Z,1528873834.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:35.166Z,1528873835.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:35.558Z,1528873835.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:35.978Z,1528873835.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:36.394Z,1528873836.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:36.789Z,1528873836.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:37.188Z,1528873837.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:37.561Z,1528873837.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:37.964Z,1528873837.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:38.364Z,1528873838.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:38.764Z,1528873838.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:41.902Z,1528873841.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:42.089Z,1528873842.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:42.453Z,1528873842.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:42.846Z,1528873842.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:43.248Z,1528873843.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:43.650Z,1528873843.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:44.054Z,1528873844.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:44.453Z,1528873844.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:44.851Z,1528873844.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:45.243Z,1528873845.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:45.652Z,1528873845.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:46.066Z,1528873846.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:46.452Z,1528873846.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:46.853Z,1528873846.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:47.251Z,1528873847.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:47.647Z,1528873847.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:48.051Z,1528873848.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:48.455Z,1528873848.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:48.851Z,1528873848.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:49.247Z,1528873849.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:49.656Z,1528873849.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:50.056Z,1528873850.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:50.452Z,1528873850.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:50.862Z,1528873850.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:51.247Z,1528873851.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:51.645Z,1528873851.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:52.051Z,1528873852.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:52.454Z,1528873852.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:52.860Z,1528873852.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:53.247Z,1528873853.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:53.644Z,1528873853.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:54.054Z,1528873854.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:54.457Z,1528873854.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:54.861Z,1528873854.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:55.250Z,1528873855.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:55.649Z,1528873855.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:56.060Z,1528873856.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:56.452Z,1528873856.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:56.859Z,1528873856.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:57.232Z,1528873857.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:57.633Z,1528873857.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:58.056Z,1528873858.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:58.459Z,1528873858.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:58.852Z,1528873858.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:59.255Z,1528873859.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:10:59.631Z,1528873859.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:00.054Z,1528873860.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:00.455Z,1528873860.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:00.862Z,1528873860.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:01.235Z,1528873861.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:01.651Z,1528873861.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:02.043Z,1528873862.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:02.464Z,1528873862.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:02.863Z,1528873862.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:03.235Z,1528873863.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:03.627Z,1528873863.627 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T07:11:03.627Z,1528873863.627 [BPC1] Communications Fault, FailCount= 1
2018-06-13T07:11:03.627Z,1528873863.627 [BPC1](ERROR): Communications Fault
2018-06-13T07:11:03.637Z,1528873863.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:03.709Z,1528873863.709 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T07:11:04.040Z,1528873864.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:04.443Z,1528873864.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:04.843Z,1528873864.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:04.933Z,1528873864.933 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T07:11:04.933Z,1528873864.933 [BPC1] No Fault, FailCount= 1
2018-06-13T07:11:05.292Z,1528873865.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:05.638Z,1528873865.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:06.046Z,1528873866.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:06.448Z,1528873866.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:06.842Z,1528873866.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:07.239Z,1528873867.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:07.637Z,1528873867.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:08.042Z,1528873868.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:08.447Z,1528873868.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:08.843Z,1528873868.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:09.236Z,1528873869.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:09.640Z,1528873869.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:10.043Z,1528873870.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:10.442Z,1528873870.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:10.843Z,1528873870.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:11.241Z,1528873871.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:11.635Z,1528873871.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:12.051Z,1528873872.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:12.447Z,1528873872.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:12.842Z,1528873872.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:13.237Z,1528873873.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:13.637Z,1528873873.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:14.044Z,1528873874.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:14.446Z,1528873874.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:14.843Z,1528873874.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:15.235Z,1528873875.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:15.644Z,1528873875.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:16.044Z,1528873876.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:16.442Z,1528873876.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:16.843Z,1528873876.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:17.238Z,1528873877.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:17.635Z,1528873877.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:18.043Z,1528873878.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:18.447Z,1528873878.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:18.843Z,1528873878.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:19.240Z,1528873879.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:19.639Z,1528873879.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:20.043Z,1528873880.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:20.446Z,1528873880.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:20.844Z,1528873880.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:21.240Z,1528873881.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:21.638Z,1528873881.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:22.051Z,1528873882.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:22.446Z,1528873882.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:22.849Z,1528873882.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:23.252Z,1528873883.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:23.638Z,1528873883.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:24.048Z,1528873884.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:24.448Z,1528873884.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:24.845Z,1528873884.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:25.247Z,1528873885.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:25.640Z,1528873885.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:26.036Z,1528873886.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:26.448Z,1528873886.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:26.849Z,1528873886.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:27.249Z,1528873887.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:27.639Z,1528873887.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:28.042Z,1528873888.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:28.440Z,1528873888.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:28.854Z,1528873888.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:29.248Z,1528873889.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:29.648Z,1528873889.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:30.047Z,1528873890.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:30.443Z,1528873890.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:30.835Z,1528873890.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:31.247Z,1528873891.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:31.649Z,1528873891.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:32.052Z,1528873892.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:32.451Z,1528873892.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:32.856Z,1528873892.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:33.254Z,1528873893.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:33.640Z,1528873893.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:34.052Z,1528873894.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:34.438Z,1528873894.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:34.852Z,1528873894.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:35.254Z,1528873895.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:35.656Z,1528873895.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:36.051Z,1528873896.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:36.457Z,1528873896.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:36.832Z,1528873896.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:37.249Z,1528873897.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:37.636Z,1528873897.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:38.034Z,1528873898.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:38.467Z,1528873898.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:38.851Z,1528873898.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:39.252Z,1528873899.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:39.648Z,1528873899.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:40.043Z,1528873900.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:43.143Z,1528873903.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:43.147Z,1528873903.147 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T07:06:41.6Z
2018-06-13T07:11:43.147Z,1528873903.147 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T07:11:43.147Z,1528873903.147 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T07:11:43.296Z,1528873903.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:44.452Z,1528873904.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:44.610Z,1528873904.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:45.006Z,1528873905.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:45.396Z,1528873905.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:45.791Z,1528873905.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:46.201Z,1528873906.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:46.603Z,1528873906.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:49.728Z,1528873909.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:49.845Z,1528873909.845 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0088.lzma
2018-06-13T07:11:49.928Z,1528873909.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:50.312Z,1528873910.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:50.640Z,1528873910.640 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0088.lzma.bak
2018-06-13T07:11:50.640Z,1528873910.640 [DataOverHttps](INFO): SBD MOMSN=8328792
2018-06-13T07:11:50.711Z,1528873910.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:52.613Z,1528873912.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:52.762Z,1528873912.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:55.918Z,1528873915.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:56.073Z,1528873916.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:56.472Z,1528873916.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:56.864Z,1528873916.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:57.260Z,1528873917.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:57.660Z,1528873917.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:58.070Z,1528873918.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:58.470Z,1528873918.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:11:58.877Z,1528873918.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:02.039Z,1528873922.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:02.158Z,1528873922.158 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0089.lzma
2018-06-13T07:12:02.228Z,1528873922.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:02.614Z,1528873922.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:02.958Z,1528873922.958 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0089.lzma.bak
2018-06-13T07:12:02.958Z,1528873922.958 [DataOverHttps](INFO): SBD MOMSN=8328795
2018-06-13T07:12:03.034Z,1528873923.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:04.918Z,1528873924.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:04.920Z,1528873924.920 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T07:12:04.921Z,1528873924.921 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T07:12:04.921Z,1528873924.921 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T07:12:05.076Z,1528873925.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:08.274Z,1528873928.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:08.475Z,1528873928.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:08.843Z,1528873928.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:09.230Z,1528873929.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:09.632Z,1528873929.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:10.026Z,1528873930.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:10.448Z,1528873930.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:10.835Z,1528873930.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:11.241Z,1528873931.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:11.627Z,1528873931.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:12.023Z,1528873932.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:12.429Z,1528873932.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:12.836Z,1528873932.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:13.230Z,1528873933.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:13.648Z,1528873933.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:14.047Z,1528873934.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:14.439Z,1528873934.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:14.822Z,1528873934.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:15.243Z,1528873935.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:15.616Z,1528873935.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:16.015Z,1528873936.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:16.443Z,1528873936.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:16.847Z,1528873936.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:17.219Z,1528873937.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:17.620Z,1528873937.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:18.019Z,1528873938.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:18.414Z,1528873938.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:18.815Z,1528873938.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:19.225Z,1528873939.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:19.628Z,1528873939.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:20.052Z,1528873940.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:20.415Z,1528873940.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:20.815Z,1528873940.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:21.224Z,1528873941.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:21.614Z,1528873941.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:22.020Z,1528873942.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:22.435Z,1528873942.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:22.829Z,1528873942.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:23.225Z,1528873943.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:23.626Z,1528873943.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:24.022Z,1528873944.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:24.427Z,1528873944.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:24.830Z,1528873944.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:25.226Z,1528873945.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:25.635Z,1528873945.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:26.034Z,1528873946.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:26.426Z,1528873946.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:26.828Z,1528873946.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:27.221Z,1528873947.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:27.605Z,1528873947.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:28.012Z,1528873948.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:28.439Z,1528873948.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:28.840Z,1528873948.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:29.239Z,1528873949.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:29.612Z,1528873949.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:30.007Z,1528873950.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:30.411Z,1528873950.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:30.812Z,1528873950.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:31.216Z,1528873951.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:31.638Z,1528873951.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:32.042Z,1528873952.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:32.411Z,1528873952.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:32.813Z,1528873952.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:33.216Z,1528873953.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:33.622Z,1528873953.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:34.015Z,1528873954.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:34.423Z,1528873954.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:34.824Z,1528873954.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:35.221Z,1528873955.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:35.616Z,1528873955.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:36.012Z,1528873956.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:36.425Z,1528873956.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:36.824Z,1528873956.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:37.222Z,1528873957.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:37.624Z,1528873957.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:38.026Z,1528873958.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:38.413Z,1528873958.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:38.816Z,1528873958.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:39.216Z,1528873959.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:39.614Z,1528873959.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:40.018Z,1528873960.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:40.424Z,1528873960.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:40.832Z,1528873960.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:41.224Z,1528873961.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:41.614Z,1528873961.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:42.012Z,1528873962.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:42.412Z,1528873962.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:42.816Z,1528873962.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:43.228Z,1528873963.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:43.628Z,1528873963.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:44.028Z,1528873964.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:44.413Z,1528873964.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:44.821Z,1528873964.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:45.230Z,1528873965.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:45.624Z,1528873965.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:46.025Z,1528873966.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:46.514Z,1528873966.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:46.910Z,1528873966.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:47.261Z,1528873967.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:47.669Z,1528873967.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:48.109Z,1528873968.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:48.541Z,1528873968.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:48.811Z,1528873968.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:49.312Z,1528873969.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:49.624Z,1528873969.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:50.018Z,1528873970.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:50.415Z,1528873970.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:50.814Z,1528873970.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:51.223Z,1528873971.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:51.620Z,1528873971.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:52.019Z,1528873972.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:52.415Z,1528873972.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:52.813Z,1528873972.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:53.219Z,1528873973.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:53.624Z,1528873973.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:54.028Z,1528873974.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:54.415Z,1528873974.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:54.815Z,1528873974.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:55.231Z,1528873975.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:55.632Z,1528873975.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:56.025Z,1528873976.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:56.417Z,1528873976.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:56.816Z,1528873976.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:57.232Z,1528873977.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:57.628Z,1528873977.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:58.024Z,1528873978.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:58.419Z,1528873978.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:58.816Z,1528873978.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:59.226Z,1528873979.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:12:59.629Z,1528873979.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:00.025Z,1528873980.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:00.412Z,1528873980.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:00.818Z,1528873980.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:01.226Z,1528873981.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:01.628Z,1528873981.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:02.036Z,1528873982.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:02.417Z,1528873982.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:02.816Z,1528873982.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:03.229Z,1528873983.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:03.628Z,1528873983.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:04.026Z,1528873984.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:04.424Z,1528873984.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:04.816Z,1528873984.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:05.232Z,1528873985.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:05.632Z,1528873985.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:08.735Z,1528873988.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:08.911Z,1528873988.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:09.314Z,1528873989.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:09.683Z,1528873989.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:10.079Z,1528873990.079 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:10.079Z,1528873990.079 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76
2018-06-13T07:13:10.079Z,1528873990.079 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:13:10.081Z,1528873990.081 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:10.081Z,1528873990.081 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76
2018-06-13T07:13:10.081Z,1528873990.081 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:13:10.083Z,1528873990.083 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:10.083Z,1528873990.083 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 76
2018-06-13T07:13:10.083Z,1528873990.083 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:13:10.157Z,1528873990.157 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:13:10.157Z,1528873990.157 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:13:10.158Z,1528873990.158 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:13:10.581Z,1528873990.581 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:13:10.581Z,1528873990.581 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76
2018-06-13T07:13:10.581Z,1528873990.581 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:13:10.581Z,1528873990.581 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76
2018-06-13T07:13:10.582Z,1528873990.582 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:13:10.582Z,1528873990.582 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 76
2018-06-13T07:13:10.896Z,1528873990.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:13:10.896Z,1528873990.896 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:13:10.896Z,1528873990.896 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:13:10.897Z,1528873990.897 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:13:10.897Z,1528873990.897 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:13:10.898Z,1528873990.898 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:13:10.898Z,1528873990.898 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:13:10.898Z,1528873990.898 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:13:10.899Z,1528873990.899 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:13:11.288Z,1528873991.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:13:11.289Z,1528873991.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:11.682Z,1528873991.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:13:11.683Z,1528873991.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:12.079Z,1528873992.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:13:12.080Z,1528873992.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:12.479Z,1528873992.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:13:12.480Z,1528873992.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:12.882Z,1528873992.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:13:12.883Z,1528873992.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:13.288Z,1528873993.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:13:13.290Z,1528873993.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:13.691Z,1528873993.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:13:13.692Z,1528873993.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:14.096Z,1528873994.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:13:14.098Z,1528873994.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:14.478Z,1528873994.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:13:14.479Z,1528873994.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:14.878Z,1528873994.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:13:14.879Z,1528873994.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:15.282Z,1528873995.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:13:15.283Z,1528873995.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:15.679Z,1528873995.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:13:15.680Z,1528873995.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:16.080Z,1528873996.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:13:16.081Z,1528873996.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:16.491Z,1528873996.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:13:16.492Z,1528873996.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:16.896Z,1528873996.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:13:16.897Z,1528873996.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:17.288Z,1528873997.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:13:17.289Z,1528873997.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:17.682Z,1528873997.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:13:17.683Z,1528873997.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:18.078Z,1528873998.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:13:18.079Z,1528873998.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:18.485Z,1528873998.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:13:18.486Z,1528873998.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:18.883Z,1528873998.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:13:18.883Z,1528873998.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:19.289Z,1528873999.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:13:19.290Z,1528873999.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:19.693Z,1528873999.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:13:19.694Z,1528873999.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:20.093Z,1528874000.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:13:20.094Z,1528874000.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:20.484Z,1528874000.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:13:20.485Z,1528874000.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:20.884Z,1528874000.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:13:20.886Z,1528874000.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:21.287Z,1528874001.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:13:21.288Z,1528874001.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:21.684Z,1528874001.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:13:21.685Z,1528874001.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:22.088Z,1528874002.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:13:22.089Z,1528874002.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:22.495Z,1528874002.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:13:22.496Z,1528874002.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:22.893Z,1528874002.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:13:22.894Z,1528874002.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:23.291Z,1528874003.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:13:23.292Z,1528874003.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:23.685Z,1528874003.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:13:23.686Z,1528874003.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:24.085Z,1528874004.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:13:24.086Z,1528874004.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:24.485Z,1528874004.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:13:24.486Z,1528874004.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:24.891Z,1528874004.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:13:24.892Z,1528874004.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:25.290Z,1528874005.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:13:25.291Z,1528874005.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:25.694Z,1528874005.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:13:25.695Z,1528874005.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:26.103Z,1528874006.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:13:26.104Z,1528874006.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:26.486Z,1528874006.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:13:26.487Z,1528874006.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:26.892Z,1528874006.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:13:26.893Z,1528874006.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:27.295Z,1528874007.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:13:27.296Z,1528874007.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:27.690Z,1528874007.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:13:27.691Z,1528874007.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:28.091Z,1528874008.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:13:28.092Z,1528874008.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:28.492Z,1528874008.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:13:28.494Z,1528874008.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:28.885Z,1528874008.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:13:28.886Z,1528874008.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:29.288Z,1528874009.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:13:29.290Z,1528874009.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:29.693Z,1528874009.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:13:29.694Z,1528874009.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:30.087Z,1528874010.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:30.488Z,1528874010.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:30.892Z,1528874010.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:31.294Z,1528874011.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:31.697Z,1528874011.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:32.095Z,1528874012.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:32.485Z,1528874012.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:32.890Z,1528874012.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:33.295Z,1528874013.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:33.692Z,1528874013.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:34.096Z,1528874014.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:34.488Z,1528874014.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:34.894Z,1528874014.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:35.300Z,1528874015.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:35.700Z,1528874015.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:36.094Z,1528874016.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:36.480Z,1528874016.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:36.876Z,1528874016.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:37.304Z,1528874017.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:37.687Z,1528874017.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:38.088Z,1528874018.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:38.475Z,1528874018.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:38.878Z,1528874018.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:39.283Z,1528874019.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:39.705Z,1528874019.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:40.088Z,1528874020.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:40.480Z,1528874020.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:40.877Z,1528874020.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:41.288Z,1528874021.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:41.700Z,1528874021.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:42.086Z,1528874022.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:42.479Z,1528874022.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:42.892Z,1528874022.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:43.289Z,1528874023.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:43.693Z,1528874023.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:44.094Z,1528874024.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:44.481Z,1528874024.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:44.888Z,1528874024.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:45.294Z,1528874025.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:45.689Z,1528874025.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:46.089Z,1528874026.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:46.483Z,1528874026.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:46.877Z,1528874026.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:47.289Z,1528874027.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:47.698Z,1528874027.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:48.085Z,1528874028.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:48.481Z,1528874028.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:48.883Z,1528874028.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:49.289Z,1528874029.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:49.692Z,1528874029.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:50.094Z,1528874030.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:50.482Z,1528874030.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:50.880Z,1528874030.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:51.296Z,1528874031.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:51.694Z,1528874031.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:52.091Z,1528874032.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:52.493Z,1528874032.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:52.884Z,1528874032.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:53.291Z,1528874033.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:53.695Z,1528874033.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:54.091Z,1528874034.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:54.488Z,1528874034.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:54.893Z,1528874034.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:55.291Z,1528874035.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:55.695Z,1528874035.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:56.098Z,1528874036.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:56.490Z,1528874036.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:56.876Z,1528874036.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:57.298Z,1528874037.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:57.695Z,1528874037.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:58.098Z,1528874038.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:58.474Z,1528874038.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:58.873Z,1528874038.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:59.299Z,1528874039.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:13:59.702Z,1528874039.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:00.102Z,1528874040.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:00.477Z,1528874040.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:00.880Z,1528874040.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:01.304Z,1528874041.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:01.704Z,1528874041.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:02.103Z,1528874042.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:02.476Z,1528874042.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:02.876Z,1528874042.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:03.278Z,1528874043.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:03.681Z,1528874043.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:04.088Z,1528874044.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:04.511Z,1528874044.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:04.877Z,1528874044.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:05.282Z,1528874045.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:05.685Z,1528874045.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:08.787Z,1528874048.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:08.984Z,1528874048.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:09.368Z,1528874049.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:09.775Z,1528874049.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:10.140Z,1528874050.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:10.548Z,1528874050.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:10.940Z,1528874050.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:11.352Z,1528874051.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:11.756Z,1528874051.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:12.148Z,1528874052.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:12.542Z,1528874052.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:12.944Z,1528874052.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:13.347Z,1528874053.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:13.751Z,1528874053.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:14.152Z,1528874054.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:14.541Z,1528874054.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:14.944Z,1528874054.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:15.351Z,1528874055.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:15.752Z,1528874055.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:16.152Z,1528874056.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:16.556Z,1528874056.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:16.943Z,1528874056.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:17.348Z,1528874057.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:17.751Z,1528874057.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:18.148Z,1528874058.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:18.546Z,1528874058.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:18.949Z,1528874058.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:19.354Z,1528874059.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:19.755Z,1528874059.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:20.156Z,1528874060.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:20.541Z,1528874060.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:20.943Z,1528874060.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:21.357Z,1528874061.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:21.753Z,1528874061.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:22.156Z,1528874062.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:22.545Z,1528874062.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:22.948Z,1528874062.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:23.356Z,1528874063.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:23.757Z,1528874063.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:24.149Z,1528874064.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:24.543Z,1528874064.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:24.952Z,1528874064.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:25.350Z,1528874065.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:25.757Z,1528874065.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:26.164Z,1528874066.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:26.548Z,1528874066.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:26.944Z,1528874066.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:27.357Z,1528874067.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:27.754Z,1528874067.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:28.160Z,1528874068.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:28.548Z,1528874068.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:28.940Z,1528874068.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:29.352Z,1528874069.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:29.758Z,1528874069.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:30.149Z,1528874070.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:30.546Z,1528874070.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:30.948Z,1528874070.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:31.353Z,1528874071.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:31.755Z,1528874071.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:32.157Z,1528874072.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:32.544Z,1528874072.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:32.942Z,1528874072.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:33.358Z,1528874073.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:33.752Z,1528874073.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:34.152Z,1528874074.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:34.556Z,1528874074.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:34.947Z,1528874074.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:35.357Z,1528874075.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:35.757Z,1528874075.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:36.153Z,1528874076.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:36.545Z,1528874076.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:36.956Z,1528874076.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:37.355Z,1528874077.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:37.764Z,1528874077.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:38.158Z,1528874078.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:38.545Z,1528874078.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:38.944Z,1528874078.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:39.359Z,1528874079.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:39.757Z,1528874079.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:40.164Z,1528874080.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:40.550Z,1528874080.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:40.949Z,1528874080.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:41.352Z,1528874081.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:41.768Z,1528874081.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:42.159Z,1528874082.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:42.555Z,1528874082.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:42.953Z,1528874082.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:43.332Z,1528874083.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:43.733Z,1528874083.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:44.138Z,1528874084.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:44.563Z,1528874084.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:44.968Z,1528874084.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:45.371Z,1528874085.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:45.740Z,1528874085.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:46.140Z,1528874086.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:46.557Z,1528874086.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:46.948Z,1528874086.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:47.340Z,1528874087.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:47.751Z,1528874087.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:48.147Z,1528874088.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:48.548Z,1528874088.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:48.944Z,1528874088.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:49.354Z,1528874089.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:49.743Z,1528874089.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:50.144Z,1528874090.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:50.552Z,1528874090.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:50.979Z,1528874090.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:51.349Z,1528874091.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:51.742Z,1528874091.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:52.142Z,1528874092.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:52.542Z,1528874092.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:52.939Z,1528874092.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:53.344Z,1528874093.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:53.751Z,1528874093.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:54.147Z,1528874094.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:54.547Z,1528874094.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:54.944Z,1528874094.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:55.344Z,1528874095.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:55.744Z,1528874095.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:56.142Z,1528874096.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:56.499Z,1528874096.499 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T07:14:56.499Z,1528874096.499 [NAL9602] Data Fault, FailCount= 1
2018-06-13T07:14:56.499Z,1528874096.499 [NAL9602](ERROR): Data Fault
2018-06-13T07:14:56.544Z,1528874096.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:56.633Z,1528874096.633 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T07:14:56.902Z,1528874096.902 [NAL9602](INFO): Powering down
2018-06-13T07:14:56.950Z,1528874096.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:57.344Z,1528874097.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:57.744Z,1528874097.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:57.825Z,1528874097.825 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T07:14:57.825Z,1528874097.825 [NAL9602] No Fault, FailCount= 1
2018-06-13T07:14:58.142Z,1528874098.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:58.538Z,1528874098.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:58.938Z,1528874098.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:59.342Z,1528874099.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:14:59.744Z,1528874099.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:00.138Z,1528874100.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:00.548Z,1528874100.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:00.944Z,1528874100.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:01.338Z,1528874101.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:01.742Z,1528874101.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:02.144Z,1528874102.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:02.544Z,1528874102.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:02.942Z,1528874102.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:03.344Z,1528874103.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:03.744Z,1528874103.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:04.142Z,1528874104.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:04.544Z,1528874104.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:04.942Z,1528874104.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:05.348Z,1528874105.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:05.742Z,1528874105.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:06.146Z,1528874106.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:06.543Z,1528874106.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:06.941Z,1528874106.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:10.056Z,1528874110.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:10.225Z,1528874110.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:10.608Z,1528874110.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:11.009Z,1528874111.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:11.406Z,1528874111.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:11.799Z,1528874111.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:12.204Z,1528874112.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:12.604Z,1528874112.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:12.999Z,1528874112.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:13.404Z,1528874113.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:13.804Z,1528874113.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:14.199Z,1528874114.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:14.603Z,1528874114.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:15.004Z,1528874115.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:15.399Z,1528874115.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:15.803Z,1528874115.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:16.205Z,1528874116.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:16.599Z,1528874116.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:17.004Z,1528874117.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:17.404Z,1528874117.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:17.803Z,1528874117.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:18.205Z,1528874118.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:18.604Z,1528874118.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:18.000Z,1528874119.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:19.404Z,1528874119.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:19.804Z,1528874119.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:20.199Z,1528874120.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:20.604Z,1528874120.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:21.005Z,1528874121.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:21.403Z,1528874121.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:21.804Z,1528874121.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:22.204Z,1528874122.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:22.599Z,1528874122.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:23.005Z,1528874123.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:23.404Z,1528874123.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:23.799Z,1528874123.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:24.204Z,1528874124.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:24.604Z,1528874124.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:25.004Z,1528874125.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:25.404Z,1528874125.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:25.804Z,1528874125.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:26.199Z,1528874126.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:26.604Z,1528874126.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:26.969Z,1528874126.969 [NAL9602](INFO): Powering up NAL9602
2018-06-13T07:15:27.005Z,1528874127.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:27.399Z,1528874127.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:27.805Z,1528874127.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:28.201Z,1528874128.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:28.604Z,1528874128.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:29.004Z,1528874129.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:29.404Z,1528874129.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:29.801Z,1528874129.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:30.205Z,1528874130.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:30.605Z,1528874130.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:31.003Z,1528874131.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:31.404Z,1528874131.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:31.800Z,1528874131.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:32.203Z,1528874132.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:32.609Z,1528874132.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:33.007Z,1528874133.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:33.409Z,1528874133.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:33.804Z,1528874133.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:34.212Z,1528874134.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:34.609Z,1528874134.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:35.003Z,1528874135.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:35.407Z,1528874135.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:35.804Z,1528874135.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:36.207Z,1528874136.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:36.605Z,1528874136.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:37.008Z,1528874137.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:37.420Z,1528874137.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:37.766Z,1528874137.766 [NAL9602](INFO): NAL9602 initialized
2018-06-13T07:15:37.812Z,1528874137.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:38.210Z,1528874138.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:38.619Z,1528874138.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:39.021Z,1528874139.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:39.425Z,1528874139.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:39.807Z,1528874139.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:40.212Z,1528874140.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:40.611Z,1528874140.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:41.018Z,1528874141.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:41.428Z,1528874141.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:41.818Z,1528874141.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:42.215Z,1528874142.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:42.609Z,1528874142.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:43.007Z,1528874143.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:43.406Z,1528874143.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:43.820Z,1528874143.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:44.222Z,1528874144.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:44.618Z,1528874144.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:45.009Z,1528874145.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:45.411Z,1528874145.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:45.817Z,1528874145.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:46.205Z,1528874146.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:46.616Z,1528874146.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:47.019Z,1528874147.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:47.421Z,1528874147.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:47.829Z,1528874147.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:48.222Z,1528874148.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:48.609Z,1528874148.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:49.011Z,1528874149.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:49.410Z,1528874149.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:49.817Z,1528874149.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:50.220Z,1528874150.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:50.618Z,1528874150.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:51.010Z,1528874151.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:51.416Z,1528874151.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:51.814Z,1528874151.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:52.210Z,1528874152.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:52.611Z,1528874152.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:53.021Z,1528874153.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:53.421Z,1528874153.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:53.822Z,1528874153.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:54.220Z,1528874154.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:54.614Z,1528874154.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:55.015Z,1528874155.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:55.412Z,1528874155.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:55.826Z,1528874155.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:56.223Z,1528874156.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:56.628Z,1528874156.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:57.017Z,1528874157.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:57.417Z,1528874157.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:57.801Z,1528874157.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:58.228Z,1528874158.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:58.605Z,1528874158.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:59.012Z,1528874159.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:59.435Z,1528874159.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:15:59.836Z,1528874159.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:00.204Z,1528874160.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:00.605Z,1528874160.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:01.005Z,1528874161.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:01.404Z,1528874161.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:01.815Z,1528874161.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:02.216Z,1528874162.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:02.612Z,1528874162.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:03.005Z,1528874163.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:03.407Z,1528874163.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:03.804Z,1528874163.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:04.207Z,1528874164.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:04.606Z,1528874164.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:05.012Z,1528874165.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:05.419Z,1528874165.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:05.816Z,1528874165.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:06.208Z,1528874166.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:06.610Z,1528874166.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:07.016Z,1528874167.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:10.113Z,1528874170.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:10.293Z,1528874170.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:10.695Z,1528874170.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:11.072Z,1528874171.072 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:11.072Z,1528874171.072 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77
2018-06-13T07:16:11.072Z,1528874171.072 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:16:11.074Z,1528874171.074 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:11.074Z,1528874171.074 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77
2018-06-13T07:16:11.074Z,1528874171.074 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:16:11.075Z,1528874171.075 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:11.076Z,1528874171.076 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 77
2018-06-13T07:16:11.076Z,1528874171.076 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:16:11.165Z,1528874171.165 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:16:11.165Z,1528874171.165 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:16:11.166Z,1528874171.166 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:16:11.545Z,1528874171.545 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:16:11.545Z,1528874171.545 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77
2018-06-13T07:16:11.546Z,1528874171.546 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:16:11.546Z,1528874171.546 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77
2018-06-13T07:16:11.546Z,1528874171.546 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:16:11.546Z,1528874171.546 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 77
2018-06-13T07:16:11.870Z,1528874171.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:16:11.870Z,1528874171.870 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:16:11.870Z,1528874171.870 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:16:11.871Z,1528874171.871 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:16:11.871Z,1528874171.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:16:11.871Z,1528874171.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:16:11.872Z,1528874171.872 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:16:11.872Z,1528874171.872 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:16:11.873Z,1528874171.873 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:16:12.269Z,1528874172.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:16:12.270Z,1528874172.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:12.669Z,1528874172.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:16:12.670Z,1528874172.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:13.073Z,1528874173.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:16:13.074Z,1528874173.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:13.474Z,1528874173.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:16:13.475Z,1528874173.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:13.872Z,1528874173.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:16:13.873Z,1528874173.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:14.271Z,1528874174.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:16:14.272Z,1528874174.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:14.670Z,1528874174.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:16:14.671Z,1528874174.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:15.064Z,1528874175.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:16:15.065Z,1528874175.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:15.472Z,1528874175.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:16:15.474Z,1528874175.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:15.873Z,1528874175.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:16:15.874Z,1528874175.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:16.277Z,1528874176.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:16:16.278Z,1528874176.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:16.673Z,1528874176.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:16:16.674Z,1528874176.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:17.064Z,1528874177.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:16:17.069Z,1528874177.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:17.472Z,1528874177.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:16:17.477Z,1528874177.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:17.875Z,1528874177.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:16:17.876Z,1528874177.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:18.278Z,1528874178.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:16:18.279Z,1528874178.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:18.656Z,1528874178.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:16:18.665Z,1528874178.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:19.087Z,1528874179.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:16:19.088Z,1528874179.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:19.484Z,1528874179.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:16:19.485Z,1528874179.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:19.884Z,1528874179.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:16:19.885Z,1528874179.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:20.261Z,1528874180.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:16:20.262Z,1528874180.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:20.656Z,1528874180.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:16:20.658Z,1528874180.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:21.068Z,1528874181.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:16:21.089Z,1528874181.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:21.468Z,1528874181.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:16:21.469Z,1528874181.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:21.867Z,1528874181.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:16:21.868Z,1528874181.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:22.272Z,1528874182.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:16:22.273Z,1528874182.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:22.670Z,1528874182.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:16:22.670Z,1528874182.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:23.061Z,1528874183.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:16:23.062Z,1528874183.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:23.463Z,1528874183.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:16:23.464Z,1528874183.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:23.863Z,1528874183.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:16:23.864Z,1528874183.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:24.260Z,1528874184.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:16:24.261Z,1528874184.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:24.663Z,1528874184.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:16:24.663Z,1528874184.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:25.069Z,1528874185.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:16:25.070Z,1528874185.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:25.468Z,1528874185.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:16:25.469Z,1528874185.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:25.871Z,1528874185.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:16:25.872Z,1528874185.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:26.263Z,1528874186.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:16:26.263Z,1528874186.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:26.659Z,1528874186.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:16:26.660Z,1528874186.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:27.064Z,1528874187.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:16:27.065Z,1528874187.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:27.463Z,1528874187.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:16:27.463Z,1528874187.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:27.870Z,1528874187.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:16:27.871Z,1528874187.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:28.270Z,1528874188.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:16:28.271Z,1528874188.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:28.672Z,1528874188.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:16:28.673Z,1528874188.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:29.059Z,1528874189.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:16:29.060Z,1528874189.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:29.463Z,1528874189.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:16:29.464Z,1528874189.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:29.865Z,1528874189.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:16:29.866Z,1528874189.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:30.269Z,1528874190.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:16:30.270Z,1528874190.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:30.664Z,1528874190.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:16:30.665Z,1528874190.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:31.073Z,1528874191.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:31.474Z,1528874191.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:31.874Z,1528874191.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:32.266Z,1528874192.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:32.675Z,1528874192.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:33.070Z,1528874193.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:33.466Z,1528874193.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:33.878Z,1528874193.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:34.277Z,1528874194.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:34.674Z,1528874194.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:35.072Z,1528874195.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:35.464Z,1528874195.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:35.866Z,1528874195.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:36.271Z,1528874196.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:36.668Z,1528874196.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:37.073Z,1528874197.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:37.474Z,1528874197.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:37.873Z,1528874197.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:38.266Z,1528874198.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:38.666Z,1528874198.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:39.065Z,1528874199.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:39.467Z,1528874199.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:39.878Z,1528874199.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:40.284Z,1528874200.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:40.673Z,1528874200.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:41.069Z,1528874201.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:41.470Z,1528874201.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:41.872Z,1528874201.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:42.277Z,1528874202.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:42.672Z,1528874202.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:43.076Z,1528874203.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:43.480Z,1528874203.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:43.874Z,1528874203.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:44.276Z,1528874204.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:44.656Z,1528874204.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:45.057Z,1528874205.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:45.456Z,1528874205.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:45.886Z,1528874205.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:46.283Z,1528874206.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:46.691Z,1528874206.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:47.056Z,1528874207.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:47.464Z,1528874207.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:47.860Z,1528874207.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:48.261Z,1528874208.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:48.664Z,1528874208.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:49.087Z,1528874209.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:49.471Z,1528874209.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:49.871Z,1528874209.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:50.260Z,1528874210.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:50.658Z,1528874210.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:51.062Z,1528874211.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:51.460Z,1528874211.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:51.867Z,1528874211.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:52.270Z,1528874212.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:52.671Z,1528874212.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:53.063Z,1528874213.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:53.463Z,1528874213.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:53.864Z,1528874213.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:54.261Z,1528874214.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:54.663Z,1528874214.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:55.092Z,1528874215.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:55.471Z,1528874215.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:55.899Z,1528874215.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:56.263Z,1528874216.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:56.660Z,1528874216.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:57.097Z,1528874217.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:57.465Z,1528874217.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:57.871Z,1528874217.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:58.271Z,1528874218.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:58.670Z,1528874218.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:59.060Z,1528874219.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:59.487Z,1528874219.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:16:59.868Z,1528874219.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:00.262Z,1528874220.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:00.666Z,1528874220.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:01.070Z,1528874221.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:01.470Z,1528874221.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:01.874Z,1528874221.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:02.268Z,1528874222.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:02.661Z,1528874222.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:03.064Z,1528874223.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:03.463Z,1528874223.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:03.869Z,1528874223.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:04.268Z,1528874224.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:04.672Z,1528874224.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:05.060Z,1528874225.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:05.466Z,1528874225.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:05.469Z,1528874225.469 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T07:17:05.469Z,1528874225.469 [Default:CheckIn:C.Wait] Stopped
2018-06-13T07:17:05.469Z,1528874225.469 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T07:17:05.469Z,1528874225.469 [Default:CheckIn:D] Running Loop=1
2018-06-13T07:17:05.865Z,1528874225.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:05.868Z,1528874225.868 [Default:CheckIn:D] Stopped
2018-06-13T07:17:05.868Z,1528874225.868 [Default:CheckIn:E] Running Loop=1
2018-06-13T07:17:08.961Z,1528874228.961 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T07:17:08.961Z,1528874228.961 [BPC1] Communications Fault, FailCount= 2
2018-06-13T07:17:08.961Z,1528874228.961 [BPC1](ERROR): Communications Fault
2018-06-13T07:17:08.971Z,1528874228.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:08.974Z,1528874228.974 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 229.873714 min 
2018-06-13T07:17:08.975Z,1528874228.975 [Default:CheckIn:E] Stopped
2018-06-13T07:17:08.975Z,1528874228.975 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T07:17:08.975Z,1528874228.975 [Default:CheckIn] Stopped
2018-06-13T07:17:08.975Z,1528874228.975 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T07:17:08.975Z,1528874228.975 [Default:CheckIn](INFO): Running loop #23
2018-06-13T07:17:08.975Z,1528874228.975 [Default:CheckIn] Running Loop=23
2018-06-13T07:17:08.975Z,1528874228.975 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T07:17:08.975Z,1528874228.975 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T07:17:09.073Z,1528874229.073 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T07:17:09.153Z,1528874229.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:09.551Z,1528874229.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:09.955Z,1528874229.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:10.045Z,1528874230.045 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T07:17:10.045Z,1528874230.045 [BPC1] No Fault, FailCount= 2
2018-06-13T07:17:10.400Z,1528874230.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:10.736Z,1528874230.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:11.123Z,1528874231.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:11.527Z,1528874231.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:11.931Z,1528874231.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:12.332Z,1528874232.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:12.742Z,1528874232.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:13.126Z,1528874233.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:13.527Z,1528874233.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:13.928Z,1528874233.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:14.332Z,1528874234.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:14.723Z,1528874234.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:15.140Z,1528874235.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:15.535Z,1528874235.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:15.936Z,1528874235.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:16.328Z,1528874236.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:16.729Z,1528874236.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:17.124Z,1528874237.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:17.527Z,1528874237.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:17.935Z,1528874237.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:18.336Z,1528874238.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:18.735Z,1528874238.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:19.129Z,1528874239.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:19.523Z,1528874239.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:19.926Z,1528874239.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:20.324Z,1528874240.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:20.723Z,1528874240.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:21.140Z,1528874241.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:21.540Z,1528874241.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:21.936Z,1528874241.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:22.329Z,1528874242.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:22.726Z,1528874242.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:23.128Z,1528874243.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:23.528Z,1528874243.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:23.935Z,1528874243.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:24.336Z,1528874244.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:24.735Z,1528874244.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:25.126Z,1528874245.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:25.527Z,1528874245.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:25.928Z,1528874245.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:26.330Z,1528874246.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:26.727Z,1528874246.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:27.139Z,1528874247.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:27.535Z,1528874247.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:27.940Z,1528874247.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:28.326Z,1528874248.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:28.730Z,1528874248.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:29.129Z,1528874249.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:29.526Z,1528874249.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:29.935Z,1528874249.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:30.340Z,1528874250.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:30.735Z,1528874250.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:31.131Z,1528874251.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:31.528Z,1528874251.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:31.937Z,1528874251.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:32.329Z,1528874252.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:32.727Z,1528874252.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:33.135Z,1528874253.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:33.540Z,1528874253.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:33.938Z,1528874253.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:34.328Z,1528874254.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:34.730Z,1528874254.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:35.132Z,1528874255.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:35.527Z,1528874255.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:35.936Z,1528874255.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:36.340Z,1528874256.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:36.739Z,1528874256.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:37.130Z,1528874257.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:37.527Z,1528874257.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:37.926Z,1528874257.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:38.329Z,1528874258.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:38.730Z,1528874258.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:39.140Z,1528874259.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:39.538Z,1528874259.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:39.944Z,1528874259.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:40.328Z,1528874260.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:40.734Z,1528874260.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:41.135Z,1528874261.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:41.532Z,1528874261.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:41.947Z,1528874261.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:42.342Z,1528874262.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:42.744Z,1528874262.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:43.136Z,1528874263.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:43.535Z,1528874263.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:43.934Z,1528874263.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:44.334Z,1528874264.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:44.735Z,1528874264.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:45.139Z,1528874265.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:45.545Z,1528874265.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:45.939Z,1528874265.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:46.339Z,1528874266.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:46.737Z,1528874266.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:47.136Z,1528874267.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:47.541Z,1528874267.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:47.942Z,1528874267.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:48.347Z,1528874268.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:48.741Z,1528874268.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:49.136Z,1528874269.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:49.520Z,1528874269.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:49.920Z,1528874269.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:50.342Z,1528874270.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:50.723Z,1528874270.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:51.151Z,1528874271.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:51.535Z,1528874271.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:51.930Z,1528874271.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:52.326Z,1528874272.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:52.725Z,1528874272.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:53.127Z,1528874273.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:53.525Z,1528874273.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:53.931Z,1528874273.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:54.331Z,1528874274.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:54.731Z,1528874274.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:55.127Z,1528874275.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:55.523Z,1528874275.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:55.926Z,1528874275.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:56.326Z,1528874276.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:56.723Z,1528874276.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:57.160Z,1528874277.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:57.535Z,1528874277.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:57.932Z,1528874277.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:58.326Z,1528874278.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:58.729Z,1528874278.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:59.124Z,1528874279.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:59.526Z,1528874279.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:17:59.939Z,1528874279.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:00.335Z,1528874280.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:00.732Z,1528874280.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:01.129Z,1528874281.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:01.522Z,1528874281.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:01.929Z,1528874281.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:02.327Z,1528874282.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:02.723Z,1528874282.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:03.132Z,1528874283.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:03.535Z,1528874283.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:03.933Z,1528874283.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:04.327Z,1528874284.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:04.738Z,1528874284.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:05.124Z,1528874285.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:05.536Z,1528874285.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:05.940Z,1528874285.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:09.062Z,1528874289.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:09.236Z,1528874289.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:09.612Z,1528874289.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:10.013Z,1528874290.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:10.398Z,1528874290.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:10.833Z,1528874290.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:11.222Z,1528874291.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:11.619Z,1528874291.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:12.032Z,1528874292.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:12.397Z,1528874292.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:12.824Z,1528874292.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:13.202Z,1528874293.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:13.595Z,1528874293.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:14.028Z,1528874294.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:14.428Z,1528874294.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:14.811Z,1528874294.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:15.200Z,1528874295.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:15.600Z,1528874295.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:15.998Z,1528874295.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:16.410Z,1528874296.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:16.855Z,1528874296.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:17.238Z,1528874297.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:17.611Z,1528874297.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:18.012Z,1528874298.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:18.399Z,1528874298.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:18.808Z,1528874298.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:19.215Z,1528874299.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:19.600Z,1528874299.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:20.011Z,1528874300.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:20.411Z,1528874300.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:20.809Z,1528874300.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:21.203Z,1528874301.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:21.615Z,1528874301.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:21.999Z,1528874301.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:22.405Z,1528874302.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:22.819Z,1528874302.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:23.212Z,1528874303.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:23.612Z,1528874303.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:24.012Z,1528874304.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:24.404Z,1528874304.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:24.804Z,1528874304.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:25.207Z,1528874305.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:25.605Z,1528874305.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:26.011Z,1528874306.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:26.413Z,1528874306.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:26.814Z,1528874306.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:27.205Z,1528874307.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:27.613Z,1528874307.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:28.020Z,1528874308.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:28.407Z,1528874308.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:28.812Z,1528874308.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:29.223Z,1528874309.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:29.652Z,1528874309.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:30.014Z,1528874310.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:30.411Z,1528874310.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:30.818Z,1528874310.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:31.214Z,1528874311.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:31.618Z,1528874311.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:32.032Z,1528874312.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:32.433Z,1528874312.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:32.818Z,1528874312.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:33.222Z,1528874313.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:33.621Z,1528874313.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:34.001Z,1528874314.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:34.400Z,1528874314.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:34.800Z,1528874314.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:35.232Z,1528874315.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:35.611Z,1528874315.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:36.011Z,1528874316.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:36.404Z,1528874316.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:36.804Z,1528874316.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:37.216Z,1528874317.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:37.604Z,1528874317.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:38.019Z,1528874318.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:38.411Z,1528874318.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:38.817Z,1528874318.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:39.241Z,1528874319.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:39.603Z,1528874319.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:40.020Z,1528874320.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:40.413Z,1528874320.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:40.813Z,1528874320.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:41.227Z,1528874321.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:41.619Z,1528874321.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:42.027Z,1528874322.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:42.400Z,1528874322.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:42.831Z,1528874322.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:43.202Z,1528874323.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:43.596Z,1528874323.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:44.027Z,1528874324.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:44.434Z,1528874324.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:44.808Z,1528874324.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:45.200Z,1528874325.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:45.600Z,1528874325.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:45.998Z,1528874325.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:46.408Z,1528874326.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:46.801Z,1528874326.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:47.212Z,1528874327.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:47.631Z,1528874327.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:48.008Z,1528874328.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:48.399Z,1528874328.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:48.804Z,1528874328.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:49.215Z,1528874329.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:49.600Z,1528874329.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:50.011Z,1528874330.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:50.412Z,1528874330.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:50.815Z,1528874330.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:51.224Z,1528874331.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:51.604Z,1528874331.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:51.999Z,1528874331.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:52.405Z,1528874332.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:52.819Z,1528874332.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:53.212Z,1528874333.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:53.613Z,1528874333.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:54.012Z,1528874334.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:54.401Z,1528874334.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:54.802Z,1528874334.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:55.214Z,1528874335.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:55.599Z,1528874335.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:56.016Z,1528874336.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:56.415Z,1528874336.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:56.812Z,1528874336.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:57.204Z,1528874337.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:57.606Z,1528874337.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:57.999Z,1528874337.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:58.406Z,1528874338.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:58.806Z,1528874338.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:59.213Z,1528874339.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:18:59.616Z,1528874339.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:00.012Z,1528874340.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:00.399Z,1528874340.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:00.804Z,1528874340.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:01.207Z,1528874341.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:01.601Z,1528874341.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:02.013Z,1528874342.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:02.417Z,1528874342.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:02.813Z,1528874342.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:03.214Z,1528874343.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:03.615Z,1528874343.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:04.009Z,1528874344.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:04.405Z,1528874344.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:04.806Z,1528874344.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:05.215Z,1528874345.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:05.620Z,1528874345.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:06.024Z,1528874346.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:09.119Z,1528874349.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:09.277Z,1528874349.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:09.661Z,1528874349.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:10.062Z,1528874350.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:10.457Z,1528874350.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:10.858Z,1528874350.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:11.255Z,1528874351.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:11.653Z,1528874351.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:12.058Z,1528874352.058 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:12.058Z,1528874352.058 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78
2018-06-13T07:19:12.058Z,1528874352.058 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:19:12.060Z,1528874352.060 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:12.060Z,1528874352.060 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78
2018-06-13T07:19:12.060Z,1528874352.060 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:19:12.062Z,1528874352.062 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:12.062Z,1528874352.062 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 78
2018-06-13T07:19:12.062Z,1528874352.062 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:19:12.141Z,1528874352.141 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:19:12.141Z,1528874352.141 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:19:12.142Z,1528874352.142 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:19:12.533Z,1528874352.533 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:19:12.533Z,1528874352.533 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78
2018-06-13T07:19:12.534Z,1528874352.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:19:12.534Z,1528874352.534 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78
2018-06-13T07:19:12.534Z,1528874352.534 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:19:12.534Z,1528874352.534 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 78
2018-06-13T07:19:12.863Z,1528874352.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:19:12.863Z,1528874352.863 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:19:12.864Z,1528874352.864 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:19:12.864Z,1528874352.864 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:19:12.865Z,1528874352.865 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:19:12.865Z,1528874352.865 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:19:12.865Z,1528874352.865 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:19:12.866Z,1528874352.866 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:19:12.866Z,1528874352.866 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:19:13.261Z,1528874353.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:19:13.262Z,1528874353.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:13.644Z,1528874353.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:19:13.645Z,1528874353.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:14.043Z,1528874354.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:19:14.043Z,1528874354.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:14.446Z,1528874354.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:19:14.447Z,1528874354.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:14.840Z,1528874354.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:19:14.842Z,1528874354.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:15.256Z,1528874355.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:19:15.273Z,1528874355.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:15.656Z,1528874355.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:19:15.657Z,1528874355.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:16.060Z,1528874356.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:19:16.081Z,1528874356.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:16.447Z,1528874356.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:19:16.448Z,1528874356.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:16.850Z,1528874356.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:19:16.851Z,1528874356.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:17.244Z,1528874357.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:19:17.245Z,1528874357.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:17.647Z,1528874357.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:19:17.648Z,1528874357.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:18.051Z,1528874358.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:19:18.052Z,1528874358.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:18.452Z,1528874358.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:19:18.453Z,1528874358.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:18.855Z,1528874358.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:19:18.856Z,1528874358.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:19.252Z,1528874359.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:19:19.253Z,1528874359.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:19.643Z,1528874359.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:19:19.644Z,1528874359.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:20.047Z,1528874360.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:19:20.048Z,1528874360.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:20.447Z,1528874360.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:19:20.448Z,1528874360.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:20.844Z,1528874360.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:19:20.845Z,1528874360.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:21.254Z,1528874361.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:19:21.255Z,1528874361.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:21.654Z,1528874361.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:19:21.655Z,1528874361.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:22.051Z,1528874362.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:19:22.052Z,1528874362.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:22.447Z,1528874362.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:19:22.448Z,1528874362.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:22.846Z,1528874362.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:19:22.846Z,1528874362.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:23.243Z,1528874363.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:19:23.244Z,1528874363.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:23.658Z,1528874363.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:19:23.659Z,1528874363.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:24.059Z,1528874364.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:19:24.060Z,1528874364.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:24.455Z,1528874364.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:19:24.456Z,1528874364.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:24.855Z,1528874364.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:19:24.856Z,1528874364.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:25.251Z,1528874365.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:19:25.252Z,1528874365.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:25.644Z,1528874365.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:19:25.645Z,1528874365.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:26.046Z,1528874366.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:19:26.047Z,1528874366.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:26.447Z,1528874366.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:19:26.448Z,1528874366.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:26.843Z,1528874366.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:19:26.844Z,1528874366.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:27.260Z,1528874367.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:19:27.261Z,1528874367.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:27.655Z,1528874367.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:19:27.656Z,1528874367.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:28.056Z,1528874368.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:19:28.056Z,1528874368.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:28.446Z,1528874368.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:19:28.447Z,1528874368.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:28.861Z,1528874368.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:19:28.862Z,1528874368.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:29.248Z,1528874369.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:19:29.249Z,1528874369.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:29.647Z,1528874369.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:19:29.648Z,1528874369.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:30.055Z,1528874370.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:19:30.056Z,1528874370.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:30.456Z,1528874370.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:19:30.457Z,1528874370.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:30.860Z,1528874370.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:19:30.861Z,1528874370.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:31.251Z,1528874371.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:19:31.251Z,1528874371.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:31.647Z,1528874371.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:19:31.648Z,1528874371.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:32.046Z,1528874372.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T07:19:32.047Z,1528874372.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:32.448Z,1528874372.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:32.847Z,1528874372.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:33.256Z,1528874373.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:33.660Z,1528874373.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:34.060Z,1528874374.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:34.449Z,1528874374.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:34.846Z,1528874374.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:35.253Z,1528874375.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:35.648Z,1528874375.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:36.060Z,1528874376.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:36.460Z,1528874376.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:36.855Z,1528874376.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:37.252Z,1528874377.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:37.649Z,1528874377.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:38.048Z,1528874378.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:38.447Z,1528874378.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:38.847Z,1528874378.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:39.256Z,1528874379.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:39.660Z,1528874379.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:40.059Z,1528874380.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:40.448Z,1528874380.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:40.855Z,1528874380.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:41.249Z,1528874381.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:41.648Z,1528874381.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:42.057Z,1528874382.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:42.460Z,1528874382.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:42.856Z,1528874382.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:43.248Z,1528874383.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:43.647Z,1528874383.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:44.056Z,1528874384.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:44.460Z,1528874384.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:44.856Z,1528874384.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:45.258Z,1528874385.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:45.661Z,1528874385.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:46.063Z,1528874386.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:46.460Z,1528874386.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:46.858Z,1528874386.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:47.258Z,1528874387.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:47.659Z,1528874387.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:48.057Z,1528874388.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:48.463Z,1528874388.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:48.860Z,1528874388.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:49.259Z,1528874389.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:49.655Z,1528874389.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:50.057Z,1528874390.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:50.466Z,1528874390.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:50.868Z,1528874390.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:51.251Z,1528874391.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:51.654Z,1528874391.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:52.063Z,1528874392.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:52.461Z,1528874392.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:52.868Z,1528874392.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:53.255Z,1528874393.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:53.662Z,1528874393.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:54.063Z,1528874394.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:54.465Z,1528874394.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:54.868Z,1528874394.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:55.265Z,1528874395.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:55.658Z,1528874395.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:56.067Z,1528874396.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:56.466Z,1528874396.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:56.863Z,1528874396.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:57.273Z,1528874397.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:57.644Z,1528874397.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:58.051Z,1528874398.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:58.455Z,1528874398.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:58.851Z,1528874398.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:59.248Z,1528874399.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:19:59.645Z,1528874399.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:00.051Z,1528874400.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:00.451Z,1528874400.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:00.855Z,1528874400.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:01.254Z,1528874401.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:01.643Z,1528874401.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:02.052Z,1528874402.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:02.456Z,1528874402.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:02.852Z,1528874402.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:03.254Z,1528874403.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:03.650Z,1528874403.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:04.056Z,1528874404.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:04.460Z,1528874404.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:04.855Z,1528874404.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:05.247Z,1528874405.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:05.651Z,1528874405.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:06.059Z,1528874406.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:09.185Z,1528874409.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:09.348Z,1528874409.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:09.740Z,1528874409.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:10.116Z,1528874410.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:10.517Z,1528874410.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:10.916Z,1528874410.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:11.343Z,1528874411.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:11.727Z,1528874411.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:12.127Z,1528874412.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:12.515Z,1528874412.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:12.917Z,1528874412.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:13.324Z,1528874413.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:13.715Z,1528874413.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:14.127Z,1528874414.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:14.527Z,1528874414.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:14.928Z,1528874414.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:15.324Z,1528874415.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:15.722Z,1528874415.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:16.116Z,1528874416.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:16.518Z,1528874416.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:16.924Z,1528874416.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:17.328Z,1528874417.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:17.727Z,1528874417.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:18.124Z,1528874418.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:18.515Z,1528874418.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:18.918Z,1528874418.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:19.318Z,1528874419.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:19.715Z,1528874419.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:20.124Z,1528874420.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:20.527Z,1528874420.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:20.928Z,1528874420.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:21.317Z,1528874421.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:21.718Z,1528874421.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:22.115Z,1528874422.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:22.518Z,1528874422.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:22.920Z,1528874422.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:23.328Z,1528874423.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:23.728Z,1528874423.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:24.124Z,1528874424.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:24.516Z,1528874424.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:24.918Z,1528874424.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:25.318Z,1528874425.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:25.716Z,1528874425.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:26.123Z,1528874426.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:26.548Z,1528874426.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:26.925Z,1528874426.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:27.318Z,1528874427.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:27.719Z,1528874427.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:28.123Z,1528874428.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:28.527Z,1528874428.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:28.924Z,1528874428.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:29.316Z,1528874429.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:29.718Z,1528874429.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:30.124Z,1528874430.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:30.523Z,1528874430.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:30.923Z,1528874430.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:31.324Z,1528874431.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:31.716Z,1528874431.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:32.123Z,1528874432.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:32.548Z,1528874432.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:32.928Z,1528874432.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:33.315Z,1528874433.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:33.728Z,1528874433.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:34.123Z,1528874434.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:34.527Z,1528874434.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:34.924Z,1528874434.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:35.318Z,1528874435.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:35.718Z,1528874435.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:36.124Z,1528874436.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:36.524Z,1528874436.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:36.923Z,1528874436.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:37.338Z,1528874437.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:37.718Z,1528874437.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:38.127Z,1528874438.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:38.528Z,1528874438.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:38.925Z,1528874438.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:39.322Z,1528874439.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:39.731Z,1528874439.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:40.126Z,1528874440.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:40.528Z,1528874440.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:40.932Z,1528874440.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:41.318Z,1528874441.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:41.719Z,1528874441.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:42.129Z,1528874442.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:42.526Z,1528874442.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:42.928Z,1528874442.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:43.320Z,1528874443.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:43.715Z,1528874443.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:44.127Z,1528874444.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:44.527Z,1528874444.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:44.924Z,1528874444.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:45.319Z,1528874445.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:45.718Z,1528874445.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:46.126Z,1528874446.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:46.527Z,1528874446.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:46.928Z,1528874446.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:47.316Z,1528874447.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:47.719Z,1528874447.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:48.132Z,1528874448.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:48.528Z,1528874448.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:48.928Z,1528874448.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:49.329Z,1528874449.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:49.721Z,1528874449.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:50.132Z,1528874450.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:50.531Z,1528874450.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:50.930Z,1528874450.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:51.321Z,1528874451.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:51.736Z,1528874451.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:52.129Z,1528874452.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:52.532Z,1528874452.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:52.931Z,1528874452.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:53.317Z,1528874453.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:53.720Z,1528874453.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:54.130Z,1528874454.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:54.529Z,1528874454.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:54.930Z,1528874454.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:55.330Z,1528874455.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:55.724Z,1528874455.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:56.133Z,1528874456.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:56.532Z,1528874456.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:56.931Z,1528874456.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:57.333Z,1528874457.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:57.727Z,1528874457.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:58.112Z,1528874458.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:58.538Z,1528874458.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:58.945Z,1528874458.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:59.342Z,1528874459.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:20:59.717Z,1528874459.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:00.116Z,1528874460.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:00.512Z,1528874460.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:00.915Z,1528874460.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:01.345Z,1528874461.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:01.748Z,1528874461.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:02.143Z,1528874462.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:02.520Z,1528874462.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:02.911Z,1528874462.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:03.316Z,1528874463.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:03.716Z,1528874463.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:04.123Z,1528874464.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:04.544Z,1528874464.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:04.945Z,1528874464.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:05.316Z,1528874465.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:05.719Z,1528874465.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:06.146Z,1528874466.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:09.251Z,1528874469.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:09.405Z,1528874469.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:09.805Z,1528874469.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:10.193Z,1528874470.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:10.605Z,1528874470.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:10.989Z,1528874470.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:11.399Z,1528874471.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:11.802Z,1528874471.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:12.198Z,1528874472.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:12.594Z,1528874472.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:12.988Z,1528874472.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:13.391Z,1528874473.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:13.789Z,1528874473.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:14.198Z,1528874474.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:14.603Z,1528874474.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:14.998Z,1528874474.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:15.393Z,1528874475.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:15.800Z,1528874475.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:16.199Z,1528874476.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:16.600Z,1528874476.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:17.007Z,1528874477.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:17.399Z,1528874477.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:17.801Z,1528874477.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:18.203Z,1528874478.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:18.599Z,1528874478.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:18.999Z,1528874478.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:19.395Z,1528874479.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:19.780Z,1528874479.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:20.207Z,1528874480.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:20.605Z,1528874480.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:21.004Z,1528874481.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:21.405Z,1528874481.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:21.808Z,1528874481.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:22.211Z,1528874482.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:22.615Z,1528874482.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:22.991Z,1528874482.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:23.384Z,1528874483.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:23.787Z,1528874483.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:24.224Z,1528874484.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:24.595Z,1528874484.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:24.995Z,1528874484.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:25.389Z,1528874485.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:25.789Z,1528874485.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:26.194Z,1528874486.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:26.596Z,1528874486.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:26.994Z,1528874486.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:27.389Z,1528874487.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:27.787Z,1528874487.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:28.198Z,1528874488.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:28.596Z,1528874488.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:28.997Z,1528874488.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:29.383Z,1528874489.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:29.792Z,1528874489.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:30.195Z,1528874490.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:30.596Z,1528874490.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:31.001Z,1528874491.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:31.387Z,1528874491.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:31.783Z,1528874491.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:32.201Z,1528874492.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:32.595Z,1528874492.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:33.004Z,1528874493.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:33.388Z,1528874493.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:33.791Z,1528874493.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:34.196Z,1528874494.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:34.601Z,1528874494.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:34.995Z,1528874494.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:35.383Z,1528874495.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:35.789Z,1528874495.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:36.200Z,1528874496.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:36.596Z,1528874496.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:36.995Z,1528874496.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:37.386Z,1528874497.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:37.784Z,1528874497.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:38.201Z,1528874498.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:38.600Z,1528874498.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:38.996Z,1528874498.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:39.388Z,1528874499.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:39.785Z,1528874499.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:40.196Z,1528874500.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:40.601Z,1528874500.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:41.004Z,1528874501.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:41.395Z,1528874501.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:41.788Z,1528874501.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:42.195Z,1528874502.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:42.598Z,1528874502.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:42.995Z,1528874502.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:43.390Z,1528874503.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:43.787Z,1528874503.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:44.195Z,1528874504.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:44.596Z,1528874504.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:45.001Z,1528874505.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:45.391Z,1528874505.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:45.790Z,1528874505.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:46.201Z,1528874506.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:46.602Z,1528874506.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:47.000Z,1528874507.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:47.392Z,1528874507.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:47.788Z,1528874507.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:48.202Z,1528874508.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:48.601Z,1528874508.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:48.995Z,1528874508.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:49.392Z,1528874509.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:49.788Z,1528874509.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:50.188Z,1528874510.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:50.596Z,1528874510.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:51.001Z,1528874511.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:51.395Z,1528874511.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:51.789Z,1528874511.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:52.188Z,1528874512.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:52.588Z,1528874512.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:52.990Z,1528874512.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:53.401Z,1528874513.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:53.800Z,1528874513.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:54.197Z,1528874514.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:54.588Z,1528874514.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:54.990Z,1528874514.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:55.390Z,1528874515.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:55.788Z,1528874515.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:56.196Z,1528874516.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:56.598Z,1528874516.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:57.005Z,1528874517.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:57.396Z,1528874517.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:57.800Z,1528874517.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:58.192Z,1528874518.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:58.596Z,1528874518.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:59.000Z,1528874519.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:59.402Z,1528874519.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:21:59.805Z,1528874519.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:00.202Z,1528874520.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:00.589Z,1528874520.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:00.992Z,1528874520.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:01.406Z,1528874521.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:01.794Z,1528874521.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:02.192Z,1528874522.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:02.605Z,1528874522.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:02.999Z,1528874522.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:03.401Z,1528874523.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:03.795Z,1528874523.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:04.191Z,1528874524.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:04.594Z,1528874524.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:04.995Z,1528874524.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:05.404Z,1528874525.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:05.809Z,1528874525.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:06.203Z,1528874526.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:06.596Z,1528874526.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:06.991Z,1528874526.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:07.398Z,1528874527.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:10.495Z,1528874530.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:10.498Z,1528874530.498 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T07:17:08.0Z
2018-06-13T07:22:10.498Z,1528874530.498 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T07:22:10.498Z,1528874530.498 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T07:22:10.640Z,1528874530.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:11.804Z,1528874531.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:11.964Z,1528874531.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:12.349Z,1528874532.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:12.744Z,1528874532.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:13.144Z,1528874533.144 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:13.145Z,1528874533.145 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79
2018-06-13T07:22:13.145Z,1528874533.145 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:22:13.147Z,1528874533.147 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:13.147Z,1528874533.147 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79
2018-06-13T07:22:13.147Z,1528874533.147 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:22:13.148Z,1528874533.148 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:13.149Z,1528874533.149 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 79
2018-06-13T07:22:13.149Z,1528874533.149 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:22:13.225Z,1528874533.225 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:22:13.225Z,1528874533.225 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:22:13.226Z,1528874533.226 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:22:13.629Z,1528874533.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:22:13.629Z,1528874533.629 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79
2018-06-13T07:22:13.630Z,1528874533.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:22:13.630Z,1528874533.630 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79
2018-06-13T07:22:13.630Z,1528874533.630 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:22:13.630Z,1528874533.630 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 79
2018-06-13T07:22:13.955Z,1528874533.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:22:13.955Z,1528874533.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:22:13.955Z,1528874533.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:22:13.956Z,1528874533.956 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:22:13.956Z,1528874533.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:22:13.956Z,1528874533.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:22:13.957Z,1528874533.957 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:22:13.957Z,1528874533.957 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:22:13.958Z,1528874533.958 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:22:17.075Z,1528874537.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2018-06-13T07:22:17.076Z,1528874537.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:17.165Z,1528874537.165 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0092.lzma
2018-06-13T07:22:17.255Z,1528874537.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T07:22:17.256Z,1528874537.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:17.628Z,1528874537.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T07:22:17.629Z,1528874537.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:17.966Z,1528874537.966 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0092.lzma.bak
2018-06-13T07:22:17.966Z,1528874537.966 [DataOverHttps](INFO): SBD MOMSN=8328806
2018-06-13T07:22:18.027Z,1528874538.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T07:22:18.028Z,1528874538.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:19.929Z,1528874539.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:22:19.930Z,1528874539.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:20.084Z,1528874540.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T07:22:20.085Z,1528874540.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:23.223Z,1528874543.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T07:22:23.223Z,1528874543.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:23.380Z,1528874543.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T07:22:23.381Z,1528874543.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:23.784Z,1528874543.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T07:22:23.785Z,1528874543.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:24.185Z,1528874544.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T07:22:24.186Z,1528874544.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:24.572Z,1528874544.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T07:22:24.574Z,1528874544.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:24.969Z,1528874544.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-06-13T07:22:24.970Z,1528874544.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:25.382Z,1528874545.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T07:22:25.382Z,1528874545.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:25.791Z,1528874545.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T07:22:25.792Z,1528874545.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:26.181Z,1528874546.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T07:22:26.182Z,1528874546.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:30.468Z,1528874550.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T07:22:30.469Z,1528874550.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:30.565Z,1528874550.565 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0093.lzma
2018-06-13T07:22:30.623Z,1528874550.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T07:22:30.624Z,1528874550.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:31.031Z,1528874551.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T07:22:31.031Z,1528874551.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:31.370Z,1528874551.370 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0093.lzma.bak
2018-06-13T07:22:31.370Z,1528874551.370 [DataOverHttps](INFO): SBD MOMSN=8328808
2018-06-13T07:22:31.439Z,1528874551.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T07:22:31.440Z,1528874551.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:33.325Z,1528874553.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:33.328Z,1528874553.328 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T07:22:33.328Z,1528874553.328 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T07:22:33.329Z,1528874553.329 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T07:22:33.453Z,1528874553.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:36.590Z,1528874556.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:36.779Z,1528874556.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:37.181Z,1528874557.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:37.588Z,1528874557.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:37.973Z,1528874557.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:38.374Z,1528874558.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:38.772Z,1528874558.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:39.172Z,1528874559.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:39.574Z,1528874559.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:39.978Z,1528874559.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:40.372Z,1528874560.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:40.764Z,1528874560.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:41.169Z,1528874561.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:41.553Z,1528874561.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:41.956Z,1528874561.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:42.386Z,1528874562.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:42.779Z,1528874562.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:43.184Z,1528874563.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:43.558Z,1528874563.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:43.957Z,1528874563.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:44.360Z,1528874564.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:44.762Z,1528874564.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:45.156Z,1528874565.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:45.587Z,1528874565.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:45.990Z,1528874565.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:46.387Z,1528874566.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:46.760Z,1528874566.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:47.161Z,1528874567.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:47.558Z,1528874567.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:47.960Z,1528874567.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:48.387Z,1528874568.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:48.767Z,1528874568.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:49.171Z,1528874569.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:49.560Z,1528874569.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:49.965Z,1528874569.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:50.364Z,1528874570.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:50.774Z,1528874570.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:51.170Z,1528874571.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:51.573Z,1528874571.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:51.975Z,1528874571.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:52.371Z,1528874572.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:52.770Z,1528874572.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:53.171Z,1528874573.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:53.570Z,1528874573.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:53.971Z,1528874573.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:54.384Z,1528874574.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:54.774Z,1528874574.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:55.170Z,1528874575.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:55.578Z,1528874575.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:55.956Z,1528874575.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:56.356Z,1528874576.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:56.780Z,1528874576.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:57.161Z,1528874577.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:57.588Z,1528874577.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:57.990Z,1528874577.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:58.388Z,1528874578.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:58.765Z,1528874578.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:59.160Z,1528874579.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:59.559Z,1528874579.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:22:59.956Z,1528874579.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:00.387Z,1528874580.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:00.795Z,1528874580.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:01.167Z,1528874581.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:01.571Z,1528874581.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:01.991Z,1528874581.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:02.509Z,1528874582.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:02.888Z,1528874582.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:03.160Z,1528874583.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:03.575Z,1528874583.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:03.978Z,1528874583.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:04.371Z,1528874584.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:04.764Z,1528874584.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:05.166Z,1528874585.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:05.564Z,1528874585.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:05.964Z,1528874585.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:06.377Z,1528874586.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:06.807Z,1528874586.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:07.174Z,1528874587.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:07.571Z,1528874587.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:07.970Z,1528874587.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:08.374Z,1528874588.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:08.773Z,1528874588.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:09.169Z,1528874589.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:09.563Z,1528874589.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:09.966Z,1528874589.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:10.374Z,1528874590.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:10.772Z,1528874590.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:11.183Z,1528874591.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:11.565Z,1528874591.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:11.964Z,1528874591.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:12.378Z,1528874592.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:12.778Z,1528874592.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:13.174Z,1528874593.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:13.567Z,1528874593.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:13.964Z,1528874593.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:14.373Z,1528874594.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:14.773Z,1528874594.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:15.170Z,1528874595.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:15.565Z,1528874595.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:15.966Z,1528874595.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:16.380Z,1528874596.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:16.776Z,1528874596.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:17.177Z,1528874597.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:17.567Z,1528874597.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:17.965Z,1528874597.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:18.377Z,1528874598.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:18.772Z,1528874598.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:19.172Z,1528874599.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:19.568Z,1528874599.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:19.966Z,1528874599.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:20.373Z,1528874600.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:20.777Z,1528874600.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:21.173Z,1528874601.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:21.565Z,1528874601.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:21.967Z,1528874601.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:22.373Z,1528874602.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:22.778Z,1528874602.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:23.184Z,1528874603.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:23.565Z,1528874603.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:23.964Z,1528874603.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:24.378Z,1528874604.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:24.774Z,1528874604.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:25.173Z,1528874605.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:25.568Z,1528874605.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:25.964Z,1528874605.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:26.380Z,1528874606.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:26.779Z,1528874606.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:27.173Z,1528874607.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:27.565Z,1528874607.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:27.967Z,1528874607.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:28.373Z,1528874608.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:28.777Z,1528874608.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:29.178Z,1528874609.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:29.572Z,1528874609.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:29.964Z,1528874609.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:30.378Z,1528874610.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:30.772Z,1528874610.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:31.172Z,1528874611.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:31.574Z,1528874611.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:31.968Z,1528874611.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:32.377Z,1528874612.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:32.778Z,1528874612.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:33.171Z,1528874613.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:33.577Z,1528874613.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:33.981Z,1528874613.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:37.086Z,1528874617.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:37.240Z,1528874617.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:37.630Z,1528874617.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:38.037Z,1528874618.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:38.409Z,1528874618.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:38.813Z,1528874618.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:39.216Z,1528874619.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:39.642Z,1528874619.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:40.043Z,1528874620.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:40.440Z,1528874620.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:40.813Z,1528874620.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:41.220Z,1528874621.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:41.612Z,1528874621.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:42.016Z,1528874622.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:42.424Z,1528874622.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:42.819Z,1528874622.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:43.219Z,1528874623.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:43.616Z,1528874623.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:44.022Z,1528874624.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:44.424Z,1528874624.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:44.823Z,1528874624.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:45.219Z,1528874625.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:45.614Z,1528874625.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:46.020Z,1528874626.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:46.420Z,1528874626.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:46.824Z,1528874626.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:47.221Z,1528874627.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:47.612Z,1528874627.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:48.014Z,1528874628.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:48.419Z,1528874628.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:48.819Z,1528874628.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:49.220Z,1528874629.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:49.614Z,1528874629.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:50.015Z,1528874630.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:50.419Z,1528874630.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:50.814Z,1528874630.814 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T07:23:50.814Z,1528874630.814 [BPC1] Communications Fault, FailCount= 3
2018-06-13T07:23:50.814Z,1528874630.814 [BPC1](ERROR): Communications Fault
2018-06-13T07:23:50.824Z,1528874630.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:50.925Z,1528874630.925 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T07:23:51.219Z,1528874631.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:51.615Z,1528874631.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:52.016Z,1528874632.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:52.093Z,1528874632.093 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T07:23:52.093Z,1528874632.093 [BPC1] No Fault, FailCount= 3
2018-06-13T07:23:52.468Z,1528874632.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:52.822Z,1528874632.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:53.224Z,1528874633.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:53.614Z,1528874633.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:54.016Z,1528874634.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:54.423Z,1528874634.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:54.823Z,1528874634.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:55.224Z,1528874635.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:55.615Z,1528874635.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:56.012Z,1528874636.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:56.423Z,1528874636.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:56.821Z,1528874636.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:57.219Z,1528874637.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:57.617Z,1528874637.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:58.014Z,1528874638.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:58.424Z,1528874638.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:58.823Z,1528874638.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:59.228Z,1528874639.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:23:59.619Z,1528874639.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:00.015Z,1528874640.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:00.424Z,1528874640.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:00.828Z,1528874640.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:01.223Z,1528874641.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:01.617Z,1528874641.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:02.020Z,1528874642.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:02.423Z,1528874642.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:02.823Z,1528874642.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:03.228Z,1528874643.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:03.617Z,1528874643.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:04.015Z,1528874644.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:04.423Z,1528874644.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:04.828Z,1528874644.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:05.224Z,1528874645.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:05.615Z,1528874645.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:06.030Z,1528874646.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:06.432Z,1528874646.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:06.828Z,1528874646.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:07.226Z,1528874647.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:07.615Z,1528874647.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:08.014Z,1528874648.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:08.424Z,1528874648.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:08.828Z,1528874648.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:09.228Z,1528874649.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:09.616Z,1528874649.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:10.014Z,1528874650.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:10.432Z,1528874650.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:10.828Z,1528874650.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:11.224Z,1528874651.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:11.615Z,1528874651.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:12.015Z,1528874652.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:12.429Z,1528874652.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:12.828Z,1528874652.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:13.249Z,1528874653.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:13.616Z,1528874653.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:14.020Z,1528874654.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:14.423Z,1528874654.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:14.828Z,1528874654.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:15.228Z,1528874655.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:15.615Z,1528874655.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:16.018Z,1528874656.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:16.418Z,1528874656.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:16.823Z,1528874656.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:17.224Z,1528874657.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:17.628Z,1528874657.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:18.015Z,1528874658.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:18.419Z,1528874658.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:18.820Z,1528874658.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:19.216Z,1528874659.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:19.632Z,1528874659.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:20.032Z,1528874660.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:20.424Z,1528874660.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:20.819Z,1528874660.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:21.214Z,1528874661.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:21.617Z,1528874661.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:22.029Z,1528874662.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:22.419Z,1528874662.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:22.825Z,1528874662.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:23.227Z,1528874663.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:23.621Z,1528874663.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:24.028Z,1528874664.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:24.421Z,1528874664.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:24.818Z,1528874664.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:25.231Z,1528874665.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:25.631Z,1528874665.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:26.036Z,1528874666.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:26.425Z,1528874666.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:26.817Z,1528874666.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:27.212Z,1528874667.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:27.619Z,1528874667.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:28.028Z,1528874668.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:28.416Z,1528874668.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:28.826Z,1528874668.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:29.234Z,1528874669.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:29.625Z,1528874669.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:30.015Z,1528874670.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:30.421Z,1528874670.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:30.825Z,1528874670.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:31.225Z,1528874671.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:31.631Z,1528874671.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:32.026Z,1528874672.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:32.428Z,1528874672.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:32.828Z,1528874672.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:33.225Z,1528874673.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:33.632Z,1528874673.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:34.026Z,1528874674.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:37.136Z,1528874677.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:37.297Z,1528874677.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:37.690Z,1528874677.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:38.088Z,1528874678.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:38.472Z,1528874678.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:38.876Z,1528874678.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:39.276Z,1528874679.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:39.694Z,1528874679.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:40.086Z,1528874680.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:40.483Z,1528874680.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:40.872Z,1528874680.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:41.275Z,1528874681.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:41.676Z,1528874681.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:42.072Z,1528874682.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:42.486Z,1528874682.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:42.881Z,1528874682.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:43.280Z,1528874683.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:43.676Z,1528874683.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:44.072Z,1528874684.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:44.484Z,1528874684.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:44.884Z,1528874684.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:45.279Z,1528874685.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:45.673Z,1528874685.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:46.075Z,1528874686.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:46.488Z,1528874686.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:46.884Z,1528874686.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:47.286Z,1528874687.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:47.673Z,1528874687.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:48.072Z,1528874688.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:48.486Z,1528874688.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:48.884Z,1528874688.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:49.292Z,1528874689.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:49.679Z,1528874689.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:50.072Z,1528874690.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:50.482Z,1528874690.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:50.884Z,1528874690.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:51.288Z,1528874691.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:51.683Z,1528874691.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:52.085Z,1528874692.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:52.480Z,1528874692.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:52.927Z,1528874692.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:53.287Z,1528874693.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:53.672Z,1528874693.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:54.078Z,1528874694.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:54.481Z,1528874694.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:54.887Z,1528874694.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:55.287Z,1528874695.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:55.690Z,1528874695.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:56.088Z,1528874696.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:56.468Z,1528874696.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:56.868Z,1528874696.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:57.264Z,1528874697.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:57.692Z,1528874697.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:58.095Z,1528874698.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:58.492Z,1528874698.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:58.868Z,1528874698.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:59.268Z,1528874699.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:24:59.668Z,1528874699.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:00.068Z,1528874700.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:00.468Z,1528874700.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:00.893Z,1528874700.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:01.290Z,1528874701.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:01.697Z,1528874701.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:02.068Z,1528874702.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:02.468Z,1528874702.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:02.891Z,1528874702.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:03.269Z,1528874703.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:03.695Z,1528874703.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:04.099Z,1528874704.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:04.503Z,1528874704.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:04.879Z,1528874704.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:05.288Z,1528874705.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:05.682Z,1528874705.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:06.096Z,1528874706.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:06.474Z,1528874706.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:06.889Z,1528874706.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:07.285Z,1528874707.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:07.692Z,1528874707.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:08.075Z,1528874708.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:08.486Z,1528874708.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:08.876Z,1528874708.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:09.279Z,1528874709.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:09.687Z,1528874709.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:10.091Z,1528874710.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:10.485Z,1528874710.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:10.884Z,1528874710.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:11.289Z,1528874711.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:11.693Z,1528874711.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:12.092Z,1528874712.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:12.474Z,1528874712.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:12.879Z,1528874712.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:13.279Z,1528874713.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:13.680Z,1528874713.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:14.071Z,1528874714.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:14.071Z,1528874714.071 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80
2018-06-13T07:25:14.071Z,1528874714.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:25:14.073Z,1528874714.073 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:14.074Z,1528874714.074 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80
2018-06-13T07:25:14.074Z,1528874714.074 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:25:14.075Z,1528874714.075 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:14.075Z,1528874714.075 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 80
2018-06-13T07:25:14.075Z,1528874714.075 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:25:14.149Z,1528874714.149 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:25:14.149Z,1528874714.149 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:25:14.150Z,1528874714.150 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:25:14.557Z,1528874714.557 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:25:14.557Z,1528874714.557 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80
2018-06-13T07:25:14.558Z,1528874714.558 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:25:14.558Z,1528874714.558 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80
2018-06-13T07:25:14.558Z,1528874714.558 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:25:14.558Z,1528874714.558 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 80
2018-06-13T07:25:14.877Z,1528874714.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:25:14.878Z,1528874714.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:25:14.878Z,1528874714.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:25:14.878Z,1528874714.878 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:25:14.879Z,1528874714.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:25:14.879Z,1528874714.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:25:14.879Z,1528874714.879 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:25:14.880Z,1528874714.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:25:14.880Z,1528874714.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:25:15.273Z,1528874715.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:25:15.274Z,1528874715.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:15.681Z,1528874715.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:25:15.682Z,1528874715.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:16.096Z,1528874716.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:25:16.097Z,1528874716.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:16.486Z,1528874716.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:25:16.487Z,1528874716.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:16.879Z,1528874716.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:25:16.880Z,1528874716.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:17.288Z,1528874717.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:25:17.293Z,1528874717.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:17.704Z,1528874717.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:25:17.709Z,1528874717.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:18.088Z,1528874718.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:25:18.089Z,1528874718.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:18.496Z,1528874718.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:25:18.501Z,1528874718.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:18.904Z,1528874718.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:25:18.904Z,1528874718.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:19.292Z,1528874719.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:25:19.293Z,1528874719.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:19.690Z,1528874719.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:25:19.691Z,1528874719.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:20.064Z,1528874720.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:25:20.081Z,1528874720.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:20.467Z,1528874720.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:25:20.468Z,1528874720.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:20.889Z,1528874720.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:25:20.890Z,1528874720.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:21.273Z,1528874721.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:25:21.274Z,1528874721.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:21.702Z,1528874721.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:25:21.703Z,1528874721.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:22.097Z,1528874722.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:25:22.098Z,1528874722.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:22.480Z,1528874722.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:25:22.481Z,1528874722.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:22.872Z,1528874722.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:25:22.874Z,1528874722.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:23.271Z,1528874723.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:25:23.271Z,1528874723.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:23.672Z,1528874723.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:25:23.673Z,1528874723.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:24.074Z,1528874724.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:25:24.075Z,1528874724.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:24.475Z,1528874724.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:25:24.476Z,1528874724.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:24.875Z,1528874724.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:25:24.876Z,1528874724.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:25.281Z,1528874725.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:25:25.282Z,1528874725.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:25.704Z,1528874725.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:25:25.709Z,1528874725.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:26.075Z,1528874726.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:25:26.076Z,1528874726.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:26.473Z,1528874726.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:25:26.474Z,1528874726.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:26.881Z,1528874726.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:25:26.882Z,1528874726.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:27.273Z,1528874727.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:25:27.274Z,1528874727.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:27.678Z,1528874727.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:25:27.679Z,1528874727.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:28.084Z,1528874728.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:25:28.085Z,1528874728.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:28.479Z,1528874728.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:25:28.480Z,1528874728.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:28.874Z,1528874728.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:25:28.875Z,1528874728.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:29.284Z,1528874729.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:25:29.289Z,1528874729.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:29.671Z,1528874729.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:25:29.672Z,1528874729.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:30.092Z,1528874730.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:25:30.093Z,1528874730.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:30.508Z,1528874730.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:25:30.513Z,1528874730.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:30.923Z,1528874730.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T07:25:30.924Z,1528874730.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:31.305Z,1528874731.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:25:31.306Z,1528874731.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:31.683Z,1528874731.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:25:31.684Z,1528874731.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:32.072Z,1528874732.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:25:32.073Z,1528874732.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:32.475Z,1528874732.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:25:32.475Z,1528874732.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:32.884Z,1528874732.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:25:32.889Z,1528874732.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:33.284Z,1528874733.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:25:33.285Z,1528874733.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:33.682Z,1528874733.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:25:33.683Z,1528874733.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:34.085Z,1528874734.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:37.210Z,1528874737.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:37.364Z,1528874737.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:37.744Z,1528874737.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:38.166Z,1528874738.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:38.571Z,1528874738.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:38.910Z,1528874738.910 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T07:25:38.910Z,1528874738.910 [NAL9602] Data Fault, FailCount= 2
2018-06-13T07:25:38.910Z,1528874738.910 [NAL9602](ERROR): Data Fault
2018-06-13T07:25:38.946Z,1528874738.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:39.025Z,1528874739.025 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T07:25:39.306Z,1528874739.306 [NAL9602](INFO): Powering down
2018-06-13T07:25:39.352Z,1528874739.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:39.746Z,1528874739.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:40.146Z,1528874740.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:40.221Z,1528874740.221 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T07:25:40.221Z,1528874740.221 [NAL9602] No Fault, FailCount= 2
2018-06-13T07:25:40.546Z,1528874740.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:40.946Z,1528874740.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:41.348Z,1528874741.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:41.747Z,1528874741.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:42.145Z,1528874742.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:42.547Z,1528874742.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:42.947Z,1528874742.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:43.359Z,1528874743.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:43.779Z,1528874743.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:44.146Z,1528874744.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:44.552Z,1528874744.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:44.947Z,1528874744.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:45.346Z,1528874745.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:45.753Z,1528874745.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:46.143Z,1528874746.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:46.546Z,1528874746.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:46.950Z,1528874746.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:47.350Z,1528874747.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:47.747Z,1528874747.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:48.154Z,1528874748.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:48.552Z,1528874748.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:48.942Z,1528874748.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:49.349Z,1528874749.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:49.746Z,1528874749.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:50.142Z,1528874750.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:50.547Z,1528874750.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:50.947Z,1528874750.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:51.348Z,1528874751.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:51.752Z,1528874751.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:52.147Z,1528874752.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:52.560Z,1528874752.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:52.952Z,1528874752.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:53.352Z,1528874753.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:53.743Z,1528874753.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:54.151Z,1528874754.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:54.549Z,1528874754.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:54.948Z,1528874754.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:55.349Z,1528874755.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:55.749Z,1528874755.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:56.154Z,1528874756.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:56.564Z,1528874756.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:56.946Z,1528874756.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:57.350Z,1528874757.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:57.752Z,1528874757.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:58.151Z,1528874758.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:58.544Z,1528874758.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:58.948Z,1528874758.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:59.350Z,1528874759.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:25:59.746Z,1528874759.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:00.152Z,1528874760.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:00.545Z,1528874760.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:00.946Z,1528874760.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:01.352Z,1528874761.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:01.745Z,1528874761.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:02.146Z,1528874762.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:02.552Z,1528874762.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:02.949Z,1528874762.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:03.348Z,1528874763.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:03.752Z,1528874763.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:04.150Z,1528874764.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:04.548Z,1528874764.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:04.952Z,1528874764.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:05.349Z,1528874765.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:05.747Z,1528874765.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:06.150Z,1528874766.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:06.552Z,1528874766.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:06.951Z,1528874766.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:07.352Z,1528874767.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:07.749Z,1528874767.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:08.148Z,1528874768.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:08.560Z,1528874768.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:08.968Z,1528874768.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:09.310Z,1528874769.310 [NAL9602](INFO): Powering up NAL9602
2018-06-13T07:26:09.357Z,1528874769.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:09.752Z,1528874769.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:10.153Z,1528874770.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:10.551Z,1528874770.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:10.953Z,1528874770.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:11.352Z,1528874771.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:11.755Z,1528874771.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:12.152Z,1528874772.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:12.552Z,1528874772.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:12.952Z,1528874772.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:13.360Z,1528874773.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:13.750Z,1528874773.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:14.151Z,1528874774.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:14.552Z,1528874774.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:14.950Z,1528874774.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:15.353Z,1528874775.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.402808 seconds old.
2018-06-13T07:26:15.354Z,1528874775.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:15.355Z,1528874775.355 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.403478 seconds old.
2018-06-13T07:26:15.356Z,1528874775.356 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.403840 seconds old.
2018-06-13T07:26:15.757Z,1528874775.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.807044 seconds old.
2018-06-13T07:26:15.758Z,1528874775.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:15.759Z,1528874775.759 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.807374 seconds old.
2018-06-13T07:26:15.760Z,1528874775.760 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.807750 seconds old.
2018-06-13T07:26:16.157Z,1528874776.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.207512 seconds old.
2018-06-13T07:26:16.158Z,1528874776.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:16.159Z,1528874776.159 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.207825 seconds old.
2018-06-13T07:26:16.160Z,1528874776.160 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.208188 seconds old.
2018-06-13T07:26:16.558Z,1528874776.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.608105 seconds old.
2018-06-13T07:26:16.559Z,1528874776.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:16.560Z,1528874776.560 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.608427 seconds old.
2018-06-13T07:26:16.561Z,1528874776.561 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.608991 seconds old.
2018-06-13T07:26:16.956Z,1528874776.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.006546 seconds old.
2018-06-13T07:26:16.958Z,1528874776.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:16.958Z,1528874776.958 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.007057 seconds old.
2018-06-13T07:26:16.959Z,1528874776.959 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.007430 seconds old.
2018-06-13T07:26:17.358Z,1528874777.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.408341 seconds old.
2018-06-13T07:26:17.359Z,1528874777.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:17.360Z,1528874777.360 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.408660 seconds old.
2018-06-13T07:26:17.361Z,1528874777.361 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.409107 seconds old.
2018-06-13T07:26:17.756Z,1528874777.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.806403 seconds old.
2018-06-13T07:26:17.757Z,1528874777.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:17.758Z,1528874777.758 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.806959 seconds old.
2018-06-13T07:26:17.759Z,1528874777.759 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.807333 seconds old.
2018-06-13T07:26:18.162Z,1528874778.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.212612 seconds old.
2018-06-13T07:26:18.163Z,1528874778.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:18.164Z,1528874778.164 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.212919 seconds old.
2018-06-13T07:26:18.165Z,1528874778.165 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.213398 seconds old.
2018-06-13T07:26:18.564Z,1528874778.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:18.958Z,1528874778.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:19.358Z,1528874779.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:19.772Z,1528874779.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:20.106Z,1528874780.106 [NAL9602](INFO): NAL9602 initialized
2018-06-13T07:26:20.180Z,1528874780.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:20.567Z,1528874780.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:20.961Z,1528874780.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:21.368Z,1528874781.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:21.764Z,1528874781.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:22.164Z,1528874782.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:22.562Z,1528874782.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:22.971Z,1528874782.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:23.370Z,1528874783.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:23.772Z,1528874783.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:24.171Z,1528874784.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:24.571Z,1528874784.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:24.962Z,1528874784.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:25.363Z,1528874785.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:25.758Z,1528874785.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:26.167Z,1528874786.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:26.567Z,1528874786.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:26.966Z,1528874786.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:27.367Z,1528874787.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:27.771Z,1528874787.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:28.139Z,1528874788.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:28.546Z,1528874788.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:28.968Z,1528874788.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:29.373Z,1528874789.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:29.780Z,1528874789.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:30.174Z,1528874790.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:30.580Z,1528874790.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:30.976Z,1528874790.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:31.354Z,1528874791.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:31.758Z,1528874791.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:32.186Z,1528874792.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:32.583Z,1528874792.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:32.961Z,1528874792.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:33.352Z,1528874793.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:33.755Z,1528874793.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:34.182Z,1528874794.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:34.558Z,1528874794.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:34.957Z,1528874794.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:35.363Z,1528874795.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:38.487Z,1528874798.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:38.644Z,1528874798.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:39.040Z,1528874799.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:39.437Z,1528874799.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:39.840Z,1528874799.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:40.248Z,1528874800.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:40.645Z,1528874800.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:41.040Z,1528874801.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:41.448Z,1528874801.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:41.818Z,1528874801.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:42.240Z,1528874802.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:42.625Z,1528874802.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:43.072Z,1528874803.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:43.464Z,1528874803.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:43.860Z,1528874803.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:44.232Z,1528874804.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:44.626Z,1528874804.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:45.034Z,1528874805.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:45.435Z,1528874805.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:45.831Z,1528874805.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:46.232Z,1528874806.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:46.626Z,1528874806.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:47.065Z,1528874807.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:47.439Z,1528874807.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:47.835Z,1528874807.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:48.232Z,1528874808.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:48.631Z,1528874808.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:49.035Z,1528874809.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:49.435Z,1528874809.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:49.834Z,1528874809.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:50.238Z,1528874810.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:50.631Z,1528874810.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:51.036Z,1528874811.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:51.435Z,1528874811.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:51.836Z,1528874811.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:52.232Z,1528874812.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:52.630Z,1528874812.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:53.035Z,1528874813.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:53.435Z,1528874813.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:53.835Z,1528874813.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:54.231Z,1528874814.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:54.628Z,1528874814.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:55.042Z,1528874815.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:55.466Z,1528874815.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:55.840Z,1528874815.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:56.233Z,1528874816.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:56.631Z,1528874816.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:57.036Z,1528874817.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:57.437Z,1528874817.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:57.836Z,1528874817.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:58.244Z,1528874818.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:58.626Z,1528874818.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:59.044Z,1528874819.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:59.439Z,1528874819.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:26:59.841Z,1528874819.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:00.235Z,1528874820.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:00.636Z,1528874820.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:01.037Z,1528874821.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:01.447Z,1528874821.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:01.839Z,1528874821.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:02.232Z,1528874822.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:02.632Z,1528874822.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:03.048Z,1528874823.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:03.448Z,1528874823.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:03.840Z,1528874823.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:04.240Z,1528874824.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:04.637Z,1528874824.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:05.040Z,1528874825.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:05.440Z,1528874825.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:05.840Z,1528874825.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:06.238Z,1528874826.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:06.638Z,1528874826.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:07.044Z,1528874827.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:07.441Z,1528874827.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:07.844Z,1528874827.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:08.242Z,1528874828.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:08.631Z,1528874828.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:09.032Z,1528874829.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:09.444Z,1528874829.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:09.848Z,1528874829.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:10.240Z,1528874830.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:10.638Z,1528874830.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:11.052Z,1528874831.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:11.435Z,1528874831.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:11.830Z,1528874831.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:12.232Z,1528874832.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:12.652Z,1528874832.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:13.044Z,1528874833.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:13.441Z,1528874833.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:13.841Z,1528874833.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:14.252Z,1528874834.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:14.634Z,1528874834.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:15.035Z,1528874835.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:15.441Z,1528874835.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:15.840Z,1528874835.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:16.255Z,1528874836.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:16.650Z,1528874836.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:17.052Z,1528874837.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:17.438Z,1528874837.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:17.846Z,1528874837.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:18.241Z,1528874838.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:18.648Z,1528874838.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:19.043Z,1528874839.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:19.456Z,1528874839.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:19.847Z,1528874839.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:20.244Z,1528874840.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:20.639Z,1528874840.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:21.048Z,1528874841.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:21.444Z,1528874841.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:21.843Z,1528874841.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:22.250Z,1528874842.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:22.660Z,1528874842.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:23.044Z,1528874843.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:23.440Z,1528874843.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:23.848Z,1528874843.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:24.246Z,1528874844.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:24.651Z,1528874844.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:25.024Z,1528874845.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:25.453Z,1528874845.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:25.860Z,1528874845.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:26.254Z,1528874846.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:26.628Z,1528874846.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:27.054Z,1528874847.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:27.425Z,1528874847.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:27.832Z,1528874847.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:28.254Z,1528874848.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:28.658Z,1528874848.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:29.034Z,1528874849.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:29.432Z,1528874849.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:29.838Z,1528874849.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:30.263Z,1528874850.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:30.628Z,1528874850.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:31.025Z,1528874851.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:31.438Z,1528874851.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:31.877Z,1528874851.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:32.247Z,1528874852.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:32.630Z,1528874852.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:33.036Z,1528874853.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:33.435Z,1528874853.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:33.832Z,1528874853.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:33.835Z,1528874853.835 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T07:27:33.835Z,1528874853.835 [Default:CheckIn:C.Wait] Stopped
2018-06-13T07:27:33.835Z,1528874853.835 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T07:27:33.835Z,1528874853.835 [Default:CheckIn:D] Running Loop=1
2018-06-13T07:27:34.244Z,1528874854.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:34.247Z,1528874854.247 [Default:CheckIn:D] Stopped
2018-06-13T07:27:34.247Z,1528874854.247 [Default:CheckIn:E] Running Loop=1
2018-06-13T07:27:34.645Z,1528874854.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:34.648Z,1528874854.648 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 240.346696 min 
2018-06-13T07:27:34.648Z,1528874854.648 [Default:CheckIn:E] Stopped
2018-06-13T07:27:34.648Z,1528874854.648 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T07:27:34.649Z,1528874854.649 [Default:CheckIn] Stopped
2018-06-13T07:27:34.649Z,1528874854.649 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T07:27:34.649Z,1528874854.649 [Default:CheckIn](INFO): Running loop #24
2018-06-13T07:27:34.649Z,1528874854.649 [Default:CheckIn] Running Loop=24
2018-06-13T07:27:34.649Z,1528874854.649 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T07:27:34.649Z,1528874854.649 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T07:27:35.074Z,1528874855.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:35.445Z,1528874855.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:35.844Z,1528874855.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:36.236Z,1528874856.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:36.642Z,1528874856.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:37.042Z,1528874857.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:40.199Z,1528874860.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:40.365Z,1528874860.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:40.762Z,1528874860.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:41.152Z,1528874861.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:41.560Z,1528874861.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:41.958Z,1528874861.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:42.357Z,1528874862.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:42.757Z,1528874862.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:43.158Z,1528874863.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:43.549Z,1528874863.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:43.936Z,1528874863.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:44.359Z,1528874864.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:44.753Z,1528874864.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:45.162Z,1528874865.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:45.560Z,1528874865.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:45.963Z,1528874865.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:46.338Z,1528874866.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:46.753Z,1528874866.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:47.143Z,1528874867.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:47.551Z,1528874867.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:47.951Z,1528874867.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:48.341Z,1528874868.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:48.739Z,1528874868.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:49.151Z,1528874869.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:49.551Z,1528874869.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:49.947Z,1528874869.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:50.344Z,1528874870.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:50.742Z,1528874870.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:51.147Z,1528874871.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:51.547Z,1528874871.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:51.947Z,1528874871.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:52.342Z,1528874872.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:52.742Z,1528874872.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:53.171Z,1528874873.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:53.579Z,1528874873.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:53.951Z,1528874873.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:54.342Z,1528874874.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:54.748Z,1528874874.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:55.152Z,1528874875.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:55.575Z,1528874875.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:55.951Z,1528874875.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:56.344Z,1528874876.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:56.743Z,1528874876.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:57.149Z,1528874877.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:57.551Z,1528874877.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:57.948Z,1528874877.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:58.343Z,1528874878.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:58.744Z,1528874878.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:59.152Z,1528874879.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:59.551Z,1528874879.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:27:59.952Z,1528874879.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:00.344Z,1528874880.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:00.786Z,1528874880.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:01.155Z,1528874881.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:01.551Z,1528874881.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:01.953Z,1528874881.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:02.347Z,1528874882.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:02.743Z,1528874882.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:03.152Z,1528874883.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:03.551Z,1528874883.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:03.951Z,1528874883.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:04.347Z,1528874884.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:04.768Z,1528874884.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:05.183Z,1528874885.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:05.555Z,1528874885.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:05.952Z,1528874885.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:06.344Z,1528874886.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:06.744Z,1528874886.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:07.160Z,1528874887.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:07.560Z,1528874887.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:07.952Z,1528874887.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:08.352Z,1528874888.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:08.747Z,1528874888.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:09.160Z,1528874889.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:09.560Z,1528874889.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:09.953Z,1528874889.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:10.348Z,1528874890.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:10.752Z,1528874890.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:11.160Z,1528874891.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:11.557Z,1528874891.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:11.958Z,1528874891.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:12.347Z,1528874892.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:12.743Z,1528874892.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:13.161Z,1528874893.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:13.574Z,1528874893.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:13.951Z,1528874893.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:14.349Z,1528874894.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:14.755Z,1528874894.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:15.160Z,1528874895.160 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:15.160Z,1528874895.160 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81
2018-06-13T07:28:15.160Z,1528874895.160 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:28:15.163Z,1528874895.163 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:15.163Z,1528874895.163 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81
2018-06-13T07:28:15.163Z,1528874895.163 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:28:15.165Z,1528874895.165 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:15.165Z,1528874895.165 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 81
2018-06-13T07:28:15.165Z,1528874895.165 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:28:15.253Z,1528874895.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:28:15.253Z,1528874895.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:28:15.253Z,1528874895.253 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:28:15.665Z,1528874895.665 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:28:15.665Z,1528874895.665 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81
2018-06-13T07:28:15.666Z,1528874895.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:28:15.666Z,1528874895.666 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81
2018-06-13T07:28:15.666Z,1528874895.666 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:28:15.666Z,1528874895.666 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 81
2018-06-13T07:28:15.968Z,1528874895.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:28:15.968Z,1528874895.968 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:28:15.969Z,1528874895.969 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:28:15.970Z,1528874895.970 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:28:15.970Z,1528874895.970 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:28:15.970Z,1528874895.970 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:28:15.971Z,1528874895.971 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:28:15.971Z,1528874895.971 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:28:15.971Z,1528874895.971 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:28:16.370Z,1528874896.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:28:16.371Z,1528874896.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:16.753Z,1528874896.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:28:16.754Z,1528874896.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:17.167Z,1528874897.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:28:17.168Z,1528874897.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:17.563Z,1528874897.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:28:17.564Z,1528874897.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:17.963Z,1528874897.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:28:17.964Z,1528874897.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:18.344Z,1528874898.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:28:18.365Z,1528874898.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:18.742Z,1528874898.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:28:18.742Z,1528874898.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:19.173Z,1528874899.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:28:19.174Z,1528874899.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:19.567Z,1528874899.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:28:19.568Z,1528874899.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:19.952Z,1528874899.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:28:19.970Z,1528874899.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:20.345Z,1528874900.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:28:20.346Z,1528874900.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:20.742Z,1528874900.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:28:20.743Z,1528874900.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:21.143Z,1528874901.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:28:21.144Z,1528874901.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:21.553Z,1528874901.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:28:21.554Z,1528874901.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:21.949Z,1528874901.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:28:21.950Z,1528874901.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:22.350Z,1528874902.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:28:22.351Z,1528874902.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:22.743Z,1528874902.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:28:22.744Z,1528874902.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:23.167Z,1528874903.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:28:23.168Z,1528874903.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:23.572Z,1528874903.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:28:23.573Z,1528874903.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:23.953Z,1528874903.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:28:23.954Z,1528874903.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:24.351Z,1528874904.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:28:24.352Z,1528874904.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:24.754Z,1528874904.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:28:24.755Z,1528874904.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:25.176Z,1528874905.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:28:25.181Z,1528874905.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:25.546Z,1528874905.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:28:25.547Z,1528874905.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:25.946Z,1528874905.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:28:25.947Z,1528874905.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:26.364Z,1528874906.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:28:26.382Z,1528874906.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:26.764Z,1528874906.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:28:26.764Z,1528874906.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:27.146Z,1528874907.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:28:27.146Z,1528874907.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:27.556Z,1528874907.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:28:27.557Z,1528874907.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:27.962Z,1528874907.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:28:27.962Z,1528874907.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:28.368Z,1528874908.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:28:28.368Z,1528874908.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:28.748Z,1528874908.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:28:28.749Z,1528874908.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:29.142Z,1528874909.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:28:29.143Z,1528874909.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:29.560Z,1528874909.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:28:29.561Z,1528874909.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:29.950Z,1528874909.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:28:29.951Z,1528874909.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:30.355Z,1528874910.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:28:30.356Z,1528874910.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:30.756Z,1528874910.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:28:30.757Z,1528874910.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:31.160Z,1528874911.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:28:31.161Z,1528874911.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:31.564Z,1528874911.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:28:31.564Z,1528874911.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:31.964Z,1528874911.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:28:31.965Z,1528874911.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:32.346Z,1528874912.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:28:32.347Z,1528874912.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:32.760Z,1528874912.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:28:32.761Z,1528874912.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:33.148Z,1528874913.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:28:33.149Z,1528874913.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:33.560Z,1528874913.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:28:33.561Z,1528874913.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:33.957Z,1528874913.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:28:33.958Z,1528874913.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:34.382Z,1528874914.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:28:34.383Z,1528874914.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:37.486Z,1528874917.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:37.639Z,1528874917.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:38.042Z,1528874918.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:38.446Z,1528874918.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:38.841Z,1528874918.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:39.237Z,1528874919.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:39.640Z,1528874919.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:40.036Z,1528874920.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:40.450Z,1528874920.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:40.871Z,1528874920.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:41.241Z,1528874921.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:41.623Z,1528874921.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:42.040Z,1528874922.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:42.428Z,1528874922.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:42.823Z,1528874922.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:43.250Z,1528874923.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:43.635Z,1528874923.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:44.035Z,1528874924.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:44.434Z,1528874924.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:44.823Z,1528874924.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:45.235Z,1528874925.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:45.659Z,1528874925.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:46.035Z,1528874926.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:46.427Z,1528874926.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:46.839Z,1528874926.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:47.235Z,1528874927.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:47.636Z,1528874927.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:48.036Z,1528874928.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:48.431Z,1528874928.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:48.828Z,1528874928.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:49.239Z,1528874929.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:49.635Z,1528874929.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:50.032Z,1528874930.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:50.429Z,1528874930.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:50.826Z,1528874930.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:51.236Z,1528874931.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:51.635Z,1528874931.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:52.036Z,1528874932.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:52.429Z,1528874932.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:52.860Z,1528874932.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:53.267Z,1528874933.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:53.639Z,1528874933.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:54.037Z,1528874934.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:54.441Z,1528874934.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:54.841Z,1528874934.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:55.246Z,1528874935.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:55.639Z,1528874935.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:56.039Z,1528874936.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:56.432Z,1528874936.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:56.831Z,1528874936.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:57.242Z,1528874937.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:57.643Z,1528874937.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:58.039Z,1528874938.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:58.432Z,1528874938.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:58.832Z,1528874938.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:59.234Z,1528874939.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:28:59.642Z,1528874939.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:00.042Z,1528874940.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:00.429Z,1528874940.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:00.829Z,1528874940.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:01.242Z,1528874941.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:01.641Z,1528874941.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:02.042Z,1528874942.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:02.430Z,1528874942.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:02.829Z,1528874942.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:03.240Z,1528874943.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:03.645Z,1528874943.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:04.038Z,1528874944.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:04.427Z,1528874944.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:04.830Z,1528874944.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:05.241Z,1528874945.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:05.648Z,1528874945.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:06.048Z,1528874946.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:06.438Z,1528874946.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:06.833Z,1528874946.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:07.240Z,1528874947.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:07.644Z,1528874947.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:08.040Z,1528874948.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:08.436Z,1528874948.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:08.837Z,1528874948.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:09.239Z,1528874949.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:09.643Z,1528874949.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:10.035Z,1528874950.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:10.437Z,1528874950.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:10.840Z,1528874950.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:11.240Z,1528874951.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:11.641Z,1528874951.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:12.045Z,1528874952.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:12.441Z,1528874952.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:12.837Z,1528874952.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:13.252Z,1528874953.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:13.643Z,1528874953.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:14.046Z,1528874954.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:14.450Z,1528874954.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:14.844Z,1528874954.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:15.227Z,1528874955.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:15.656Z,1528874955.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:16.056Z,1528874956.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:16.447Z,1528874956.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:16.828Z,1528874956.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:17.227Z,1528874957.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:17.656Z,1528874957.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:18.055Z,1528874958.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:18.472Z,1528874958.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:18.856Z,1528874958.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:19.258Z,1528874959.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:19.636Z,1528874959.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:20.029Z,1528874960.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:20.436Z,1528874960.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:20.849Z,1528874960.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:21.252Z,1528874961.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:21.636Z,1528874961.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:22.054Z,1528874962.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:22.457Z,1528874962.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:22.851Z,1528874962.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:23.229Z,1528874963.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:23.639Z,1528874963.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:24.041Z,1528874964.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:24.458Z,1528874964.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:24.844Z,1528874964.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:25.237Z,1528874965.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:25.644Z,1528874965.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:26.032Z,1528874966.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:26.433Z,1528874966.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:26.832Z,1528874966.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:27.261Z,1528874967.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:27.639Z,1528874967.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:28.039Z,1528874968.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:28.436Z,1528874968.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:28.858Z,1528874968.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:29.232Z,1528874969.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:29.631Z,1528874969.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:30.042Z,1528874970.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:30.461Z,1528874970.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:30.843Z,1528874970.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:31.244Z,1528874971.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:31.666Z,1528874971.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:32.047Z,1528874972.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:32.438Z,1528874972.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:32.835Z,1528874972.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:33.233Z,1528874973.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:33.661Z,1528874973.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:34.044Z,1528874974.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:34.439Z,1528874974.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:37.535Z,1528874977.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:37.683Z,1528874977.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:38.078Z,1528874978.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:38.481Z,1528874978.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:38.879Z,1528874978.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:39.269Z,1528874979.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:39.676Z,1528874979.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:40.070Z,1528874980.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:40.477Z,1528874980.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:40.892Z,1528874980.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:41.278Z,1528874981.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:41.676Z,1528874981.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:42.077Z,1528874982.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:42.475Z,1528874982.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:42.875Z,1528874982.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:43.284Z,1528874983.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:43.685Z,1528874983.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:44.086Z,1528874984.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:44.497Z,1528874984.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:44.880Z,1528874984.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:45.274Z,1528874985.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:45.680Z,1528874985.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:46.060Z,1528874986.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:46.483Z,1528874986.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:46.888Z,1528874986.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:47.285Z,1528874987.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:47.663Z,1528874987.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:48.086Z,1528874988.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:48.465Z,1528874988.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:48.863Z,1528874988.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:49.263Z,1528874989.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:49.688Z,1528874989.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:50.088Z,1528874990.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:50.494Z,1528874990.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:50.862Z,1528874990.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:51.288Z,1528874991.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:51.666Z,1528874991.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:52.064Z,1528874992.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:52.472Z,1528874992.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:52.892Z,1528874992.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:53.272Z,1528874993.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:53.666Z,1528874993.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:54.067Z,1528874994.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:54.490Z,1528874994.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:54.867Z,1528874994.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:55.268Z,1528874995.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:55.696Z,1528874995.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:56.095Z,1528874996.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:56.476Z,1528874996.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:56.886Z,1528874996.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:57.284Z,1528874997.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:57.684Z,1528874997.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:58.062Z,1528874998.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:58.476Z,1528874998.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:58.874Z,1528874998.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:59.302Z,1528874999.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:29:59.662Z,1528874999.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:00.069Z,1528875000.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:00.465Z,1528875000.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:00.900Z,1528875000.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:01.264Z,1528875001.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:01.673Z,1528875001.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:02.078Z,1528875002.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:02.500Z,1528875002.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:02.877Z,1528875002.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:03.266Z,1528875003.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:03.669Z,1528875003.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:04.060Z,1528875004.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:04.475Z,1528875004.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:04.882Z,1528875004.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:05.276Z,1528875005.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:05.676Z,1528875005.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:06.068Z,1528875006.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:06.463Z,1528875006.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:06.869Z,1528875006.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:07.313Z,1528875007.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:07.705Z,1528875007.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:08.084Z,1528875008.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:08.481Z,1528875008.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:08.883Z,1528875008.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:09.269Z,1528875009.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:09.685Z,1528875009.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:10.061Z,1528875010.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:10.476Z,1528875010.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:10.877Z,1528875010.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:11.270Z,1528875011.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:11.670Z,1528875011.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:12.068Z,1528875012.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:12.471Z,1528875012.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:12.873Z,1528875012.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:13.277Z,1528875013.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:13.675Z,1528875013.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:14.076Z,1528875014.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:14.481Z,1528875014.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:14.867Z,1528875014.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:15.269Z,1528875015.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:15.680Z,1528875015.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:16.072Z,1528875016.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:16.481Z,1528875016.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:16.883Z,1528875016.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:17.272Z,1528875017.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:17.678Z,1528875017.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:18.084Z,1528875018.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:18.482Z,1528875018.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:18.874Z,1528875018.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:19.261Z,1528875019.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:19.692Z,1528875019.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:20.071Z,1528875020.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:20.472Z,1528875020.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:20.863Z,1528875020.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:21.265Z,1528875021.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:21.676Z,1528875021.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:22.067Z,1528875022.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:22.502Z,1528875022.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:22.883Z,1528875022.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:23.273Z,1528875023.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:23.664Z,1528875023.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:24.072Z,1528875024.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:24.464Z,1528875024.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:24.864Z,1528875024.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:25.268Z,1528875025.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:25.684Z,1528875025.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:26.081Z,1528875026.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:26.478Z,1528875026.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:26.873Z,1528875026.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:27.270Z,1528875027.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:27.672Z,1528875027.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:28.072Z,1528875028.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:28.474Z,1528875028.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:28.879Z,1528875028.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:29.271Z,1528875029.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:29.674Z,1528875029.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:30.070Z,1528875030.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:30.456Z,1528875030.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:30.880Z,1528875030.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:31.261Z,1528875031.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:31.667Z,1528875031.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:32.071Z,1528875032.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:32.471Z,1528875032.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:32.863Z,1528875032.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:33.263Z,1528875033.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:33.664Z,1528875033.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:34.062Z,1528875034.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:34.476Z,1528875034.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:37.612Z,1528875037.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:37.784Z,1528875037.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:38.159Z,1528875038.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:38.564Z,1528875038.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:38.964Z,1528875038.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:39.359Z,1528875039.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:39.763Z,1528875039.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:40.170Z,1528875040.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:40.559Z,1528875040.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:40.968Z,1528875040.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:41.358Z,1528875041.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:41.740Z,1528875041.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:42.137Z,1528875042.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:42.564Z,1528875042.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:42.984Z,1528875042.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:43.368Z,1528875043.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:43.743Z,1528875043.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:44.168Z,1528875044.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:44.558Z,1528875044.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:44.942Z,1528875044.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:45.342Z,1528875045.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:45.776Z,1528875045.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:46.168Z,1528875046.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:46.569Z,1528875046.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:46.944Z,1528875046.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:47.371Z,1528875047.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:47.749Z,1528875047.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:48.145Z,1528875048.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:48.552Z,1528875048.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:48.972Z,1528875048.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:49.372Z,1528875049.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:49.745Z,1528875049.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:50.152Z,1528875050.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:50.579Z,1528875050.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:50.946Z,1528875050.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:51.348Z,1528875051.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:51.755Z,1528875051.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:52.176Z,1528875052.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:52.557Z,1528875052.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:52.949Z,1528875052.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:53.345Z,1528875053.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:53.743Z,1528875053.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:54.160Z,1528875054.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:54.553Z,1528875054.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:54.955Z,1528875054.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:55.379Z,1528875055.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:55.738Z,1528875055.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:56.147Z,1528875056.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:56.549Z,1528875056.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:56.939Z,1528875056.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:57.342Z,1528875057.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:57.757Z,1528875057.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:58.157Z,1528875058.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:58.582Z,1528875058.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:58.944Z,1528875058.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:59.345Z,1528875059.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:30:59.750Z,1528875059.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:00.156Z,1528875060.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:00.552Z,1528875060.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:00.963Z,1528875060.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:01.359Z,1528875061.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:01.742Z,1528875061.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:02.147Z,1528875062.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:02.554Z,1528875062.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:02.955Z,1528875062.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:03.364Z,1528875063.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:03.759Z,1528875063.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:04.156Z,1528875064.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:04.568Z,1528875064.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:04.948Z,1528875064.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:05.347Z,1528875065.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:05.744Z,1528875065.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:06.151Z,1528875066.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:06.550Z,1528875066.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:06.955Z,1528875066.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:07.352Z,1528875067.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:07.752Z,1528875067.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:08.146Z,1528875068.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:08.550Z,1528875068.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:08.946Z,1528875068.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:09.359Z,1528875069.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:09.767Z,1528875069.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:10.156Z,1528875070.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:10.554Z,1528875070.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:10.950Z,1528875070.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:11.337Z,1528875071.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:11.741Z,1528875071.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:12.139Z,1528875072.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:12.568Z,1528875072.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:12.952Z,1528875072.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:13.356Z,1528875073.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:13.740Z,1528875073.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:14.141Z,1528875074.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:14.542Z,1528875074.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:14.943Z,1528875074.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:15.342Z,1528875075.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:15.798Z,1528875075.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:16.184Z,1528875076.184 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:16.184Z,1528875076.184 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82
2018-06-13T07:31:16.184Z,1528875076.184 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:31:16.186Z,1528875076.186 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:16.186Z,1528875076.186 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82
2018-06-13T07:31:16.186Z,1528875076.186 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:31:16.188Z,1528875076.188 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:16.188Z,1528875076.188 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 82
2018-06-13T07:31:16.188Z,1528875076.188 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:31:16.277Z,1528875076.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:31:16.277Z,1528875076.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:31:16.277Z,1528875076.277 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:31:16.629Z,1528875076.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:31:16.629Z,1528875076.629 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82
2018-06-13T07:31:16.630Z,1528875076.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:31:16.630Z,1528875076.630 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82
2018-06-13T07:31:16.630Z,1528875076.630 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:31:16.630Z,1528875076.630 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 82
2018-06-13T07:31:16.949Z,1528875076.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:31:16.950Z,1528875076.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:31:16.950Z,1528875076.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:31:16.950Z,1528875076.950 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:31:16.951Z,1528875076.951 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:31:16.951Z,1528875076.951 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:31:16.951Z,1528875076.951 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:31:16.952Z,1528875076.952 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:31:16.952Z,1528875076.952 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:31:17.350Z,1528875077.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:31:17.351Z,1528875077.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:17.752Z,1528875077.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:31:17.753Z,1528875077.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:18.147Z,1528875078.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:31:18.148Z,1528875078.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:18.554Z,1528875078.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:31:18.554Z,1528875078.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:18.956Z,1528875078.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:31:18.957Z,1528875078.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:19.352Z,1528875079.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:31:19.353Z,1528875079.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:19.754Z,1528875079.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:31:19.755Z,1528875079.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:20.153Z,1528875080.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:31:20.154Z,1528875080.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:20.551Z,1528875080.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:31:20.552Z,1528875080.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:20.956Z,1528875080.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:31:20.957Z,1528875080.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:21.349Z,1528875081.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:31:21.350Z,1528875081.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:21.757Z,1528875081.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:31:21.758Z,1528875081.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:22.156Z,1528875082.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:31:22.157Z,1528875082.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:22.555Z,1528875082.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:31:22.556Z,1528875082.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:22.949Z,1528875082.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:31:22.950Z,1528875082.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:23.352Z,1528875083.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:31:23.357Z,1528875083.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:23.753Z,1528875083.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:31:23.754Z,1528875083.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:24.136Z,1528875084.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:31:24.136Z,1528875084.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:24.564Z,1528875084.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:31:24.565Z,1528875084.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:24.966Z,1528875084.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:31:24.966Z,1528875084.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:25.371Z,1528875085.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:31:25.372Z,1528875085.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:25.736Z,1528875085.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:31:25.737Z,1528875085.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:26.152Z,1528875086.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:31:26.153Z,1528875086.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:26.543Z,1528875086.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:31:26.544Z,1528875086.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:26.944Z,1528875086.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:31:26.945Z,1528875086.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:27.343Z,1528875087.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:31:27.344Z,1528875087.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:27.751Z,1528875087.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:31:27.752Z,1528875087.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:28.151Z,1528875088.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:31:28.152Z,1528875088.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:28.553Z,1528875088.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:31:28.554Z,1528875088.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:28.953Z,1528875088.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:31:28.954Z,1528875088.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:29.343Z,1528875089.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:31:29.344Z,1528875089.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:29.743Z,1528875089.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:31:29.744Z,1528875089.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:30.145Z,1528875090.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:31:30.146Z,1528875090.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:30.548Z,1528875090.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:31:30.549Z,1528875090.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:30.951Z,1528875090.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:31:30.951Z,1528875090.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:31.351Z,1528875091.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:31:31.352Z,1528875091.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:31.742Z,1528875091.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:31:31.743Z,1528875091.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:32.144Z,1528875092.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:31:32.145Z,1528875092.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:32.538Z,1528875092.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:31:32.539Z,1528875092.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:32.943Z,1528875092.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:31:32.944Z,1528875092.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:33.342Z,1528875093.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:31:33.343Z,1528875093.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:33.751Z,1528875093.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:31:33.752Z,1528875093.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:34.155Z,1528875094.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:31:34.156Z,1528875094.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:34.554Z,1528875094.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:31:34.555Z,1528875094.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:34.948Z,1528875094.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:31:34.949Z,1528875094.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:35.346Z,1528875095.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:31:35.347Z,1528875095.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:35.752Z,1528875095.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:31:35.754Z,1528875095.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:38.883Z,1528875098.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:39.050Z,1528875099.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:39.452Z,1528875099.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:39.847Z,1528875099.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:40.243Z,1528875100.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:40.633Z,1528875100.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:41.051Z,1528875101.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:41.452Z,1528875101.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:41.856Z,1528875101.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:42.260Z,1528875102.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:42.651Z,1528875102.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:43.044Z,1528875103.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:43.452Z,1528875103.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:43.822Z,1528875103.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:44.247Z,1528875104.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:44.654Z,1528875104.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:45.060Z,1528875105.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:45.454Z,1528875105.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:45.831Z,1528875105.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:46.230Z,1528875106.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:46.653Z,1528875106.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:47.056Z,1528875107.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:47.434Z,1528875107.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:47.846Z,1528875107.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:48.256Z,1528875108.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:48.629Z,1528875108.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:49.033Z,1528875109.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:49.433Z,1528875109.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:49.855Z,1528875109.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:50.229Z,1528875110.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:50.661Z,1528875110.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:51.061Z,1528875111.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:51.463Z,1528875111.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:51.830Z,1528875111.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:52.229Z,1528875112.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:52.634Z,1528875112.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:53.060Z,1528875113.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:53.427Z,1528875113.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:53.862Z,1528875113.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:54.271Z,1528875114.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:54.664Z,1528875114.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:55.029Z,1528875115.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:55.428Z,1528875115.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:55.836Z,1528875115.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:56.229Z,1528875116.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:56.640Z,1528875116.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:57.043Z,1528875117.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:57.444Z,1528875117.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:57.832Z,1528875117.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:58.232Z,1528875118.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:58.630Z,1528875118.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:59.038Z,1528875119.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:59.427Z,1528875119.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:31:59.840Z,1528875119.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:00.238Z,1528875120.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:00.642Z,1528875120.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:01.040Z,1528875121.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:01.430Z,1528875121.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:01.829Z,1528875121.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:02.240Z,1528875122.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:02.644Z,1528875122.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:03.041Z,1528875123.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:03.452Z,1528875123.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:03.832Z,1528875123.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:04.235Z,1528875124.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:04.636Z,1528875124.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:05.040Z,1528875125.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:05.441Z,1528875125.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:05.840Z,1528875125.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:06.252Z,1528875126.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:06.662Z,1528875126.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:07.036Z,1528875127.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:07.439Z,1528875127.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:07.822Z,1528875127.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:08.248Z,1528875128.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:08.658Z,1528875128.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:09.035Z,1528875129.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:09.431Z,1528875129.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:09.828Z,1528875129.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:10.225Z,1528875130.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:10.626Z,1528875130.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:11.039Z,1528875131.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:11.427Z,1528875131.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:11.840Z,1528875131.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:12.236Z,1528875132.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:12.636Z,1528875132.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:13.042Z,1528875133.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:13.428Z,1528875133.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:13.826Z,1528875133.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:14.240Z,1528875134.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:14.636Z,1528875134.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:15.035Z,1528875135.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:15.432Z,1528875135.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:15.842Z,1528875135.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:16.225Z,1528875136.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:16.627Z,1528875136.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:17.030Z,1528875137.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:17.427Z,1528875137.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:17.839Z,1528875137.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:18.242Z,1528875138.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:18.638Z,1528875138.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:19.033Z,1528875139.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:19.444Z,1528875139.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:19.848Z,1528875139.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:20.236Z,1528875140.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:20.643Z,1528875140.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:21.048Z,1528875141.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:21.439Z,1528875141.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:21.846Z,1528875141.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:22.235Z,1528875142.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:22.630Z,1528875142.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:23.033Z,1528875143.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:23.434Z,1528875143.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:23.849Z,1528875143.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:24.254Z,1528875144.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:24.643Z,1528875144.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:25.032Z,1528875145.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:25.440Z,1528875145.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:25.843Z,1528875145.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:26.240Z,1528875146.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:26.656Z,1528875146.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:27.042Z,1528875147.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:27.440Z,1528875147.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:27.834Z,1528875147.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:28.233Z,1528875148.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:28.640Z,1528875148.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:29.034Z,1528875149.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:29.437Z,1528875149.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:29.841Z,1528875149.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:30.248Z,1528875150.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:30.643Z,1528875150.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:31.035Z,1528875151.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:31.441Z,1528875151.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:31.831Z,1528875151.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:32.238Z,1528875152.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:32.681Z,1528875152.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:33.063Z,1528875153.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:33.451Z,1528875153.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:33.834Z,1528875153.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:34.243Z,1528875154.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:34.643Z,1528875154.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:35.042Z,1528875155.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:35.046Z,1528875155.046 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T07:27:34.6Z
2018-06-13T07:32:35.046Z,1528875155.046 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T07:32:35.046Z,1528875155.046 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T07:32:35.449Z,1528875155.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:39.318Z,1528875159.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:39.417Z,1528875159.417 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0096.lzma
2018-06-13T07:32:39.495Z,1528875159.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:39.871Z,1528875159.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:40.218Z,1528875160.218 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0096.lzma.bak
2018-06-13T07:32:40.218Z,1528875160.218 [DataOverHttps](INFO): SBD MOMSN=8328820
2018-06-13T07:32:40.298Z,1528875160.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:42.173Z,1528875162.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:42.332Z,1528875162.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:42.728Z,1528875162.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:45.866Z,1528875165.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:46.040Z,1528875166.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:46.422Z,1528875166.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:46.799Z,1528875166.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:47.197Z,1528875167.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:47.627Z,1528875167.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:48.023Z,1528875168.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:48.431Z,1528875168.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:48.802Z,1528875168.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:51.910Z,1528875171.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:52.025Z,1528875172.025 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20180613T032335/Express0097.lzma
2018-06-13T07:32:52.094Z,1528875172.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:52.492Z,1528875172.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:52.822Z,1528875172.822 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0097.lzma.bak
2018-06-13T07:32:52.822Z,1528875172.822 [DataOverHttps](INFO): SBD MOMSN=8328822
2018-06-13T07:32:52.896Z,1528875172.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:54.802Z,1528875174.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:54.805Z,1528875174.805 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T07:32:54.805Z,1528875174.805 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T07:32:54.805Z,1528875174.805 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T07:32:54.944Z,1528875174.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:55.354Z,1528875175.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:58.508Z,1528875178.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:58.684Z,1528875178.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:59.052Z,1528875179.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:59.453Z,1528875179.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:32:59.846Z,1528875179.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:00.245Z,1528875180.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:00.669Z,1528875180.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:01.051Z,1528875181.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:01.460Z,1528875181.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:01.830Z,1528875181.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:02.229Z,1528875182.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:02.633Z,1528875182.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:03.034Z,1528875183.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:03.434Z,1528875183.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:03.859Z,1528875183.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:04.263Z,1528875184.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:04.640Z,1528875184.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:05.047Z,1528875185.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:05.437Z,1528875185.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:05.837Z,1528875185.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:06.253Z,1528875186.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:06.644Z,1528875186.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:07.039Z,1528875187.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:07.444Z,1528875187.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:07.842Z,1528875187.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:08.246Z,1528875188.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:08.648Z,1528875188.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:09.050Z,1528875189.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:09.446Z,1528875189.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:09.846Z,1528875189.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:10.257Z,1528875190.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:10.692Z,1528875190.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:11.068Z,1528875191.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:11.497Z,1528875191.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:11.932Z,1528875191.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:12.311Z,1528875192.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:12.702Z,1528875192.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:13.073Z,1528875193.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:13.452Z,1528875193.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:13.837Z,1528875193.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:14.238Z,1528875194.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:14.646Z,1528875194.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:15.051Z,1528875195.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:15.441Z,1528875195.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:15.842Z,1528875195.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:16.240Z,1528875196.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:16.646Z,1528875196.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:17.050Z,1528875197.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:17.443Z,1528875197.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:17.840Z,1528875197.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:18.239Z,1528875198.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:18.644Z,1528875198.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:19.040Z,1528875199.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:19.436Z,1528875199.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:19.838Z,1528875199.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:20.236Z,1528875200.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:20.644Z,1528875200.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:21.044Z,1528875201.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:21.444Z,1528875201.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:21.846Z,1528875201.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:22.241Z,1528875202.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:22.642Z,1528875202.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:23.043Z,1528875203.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:23.452Z,1528875203.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:23.852Z,1528875203.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:24.241Z,1528875204.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:24.646Z,1528875204.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:25.043Z,1528875205.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:25.444Z,1528875205.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:25.851Z,1528875205.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:26.240Z,1528875206.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:26.649Z,1528875206.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:27.049Z,1528875207.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:27.445Z,1528875207.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:27.842Z,1528875207.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:28.241Z,1528875208.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:28.647Z,1528875208.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:29.049Z,1528875209.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:29.451Z,1528875209.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:29.838Z,1528875209.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:30.237Z,1528875210.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:30.652Z,1528875210.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:31.045Z,1528875211.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:31.453Z,1528875211.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:31.843Z,1528875211.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:32.246Z,1528875212.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:32.647Z,1528875212.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:33.049Z,1528875213.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:33.446Z,1528875213.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:33.846Z,1528875213.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:34.245Z,1528875214.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:34.646Z,1528875214.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:35.057Z,1528875215.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:35.452Z,1528875215.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:35.830Z,1528875215.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:36.260Z,1528875216.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:36.672Z,1528875216.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:37.043Z,1528875217.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:37.444Z,1528875217.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:37.833Z,1528875217.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:38.234Z,1528875218.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:38.639Z,1528875218.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:39.043Z,1528875219.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:39.439Z,1528875219.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:39.836Z,1528875219.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:40.241Z,1528875220.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:40.632Z,1528875220.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:41.039Z,1528875221.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:41.443Z,1528875221.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:41.839Z,1528875221.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:42.243Z,1528875222.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:42.648Z,1528875222.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:43.034Z,1528875223.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:43.437Z,1528875223.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:43.846Z,1528875223.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:44.246Z,1528875224.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:44.647Z,1528875224.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:45.050Z,1528875225.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:45.444Z,1528875225.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:45.838Z,1528875225.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:46.248Z,1528875226.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:46.685Z,1528875226.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:47.049Z,1528875227.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:47.456Z,1528875227.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:47.847Z,1528875227.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:48.246Z,1528875228.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:48.656Z,1528875228.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:49.056Z,1528875229.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:49.438Z,1528875229.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:49.857Z,1528875229.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:50.250Z,1528875230.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:50.648Z,1528875230.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:51.057Z,1528875231.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:51.429Z,1528875231.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:51.851Z,1528875231.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:52.232Z,1528875232.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:52.636Z,1528875232.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:53.063Z,1528875233.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:53.442Z,1528875233.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:53.836Z,1528875233.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:54.236Z,1528875234.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:54.632Z,1528875234.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:55.032Z,1528875235.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:55.440Z,1528875235.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:58.581Z,1528875238.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:58.758Z,1528875238.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:59.130Z,1528875239.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:59.520Z,1528875239.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:33:59.926Z,1528875239.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:00.324Z,1528875240.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:00.733Z,1528875240.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:01.127Z,1528875241.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:01.530Z,1528875241.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:01.934Z,1528875241.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:02.304Z,1528875242.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:02.727Z,1528875242.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:03.132Z,1528875243.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:03.527Z,1528875243.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:03.910Z,1528875243.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:04.316Z,1528875244.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:04.738Z,1528875244.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:05.135Z,1528875245.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:05.539Z,1528875245.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:05.913Z,1528875245.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:06.311Z,1528875246.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:06.745Z,1528875246.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:07.119Z,1528875247.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:07.539Z,1528875247.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:07.911Z,1528875247.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:08.311Z,1528875248.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:08.740Z,1528875248.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:09.122Z,1528875249.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:09.523Z,1528875249.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:09.916Z,1528875249.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:10.316Z,1528875250.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:10.724Z,1528875250.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:11.122Z,1528875251.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:11.549Z,1528875251.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:11.911Z,1528875251.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:12.312Z,1528875252.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:12.723Z,1528875252.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:13.123Z,1528875253.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:13.544Z,1528875253.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:13.915Z,1528875253.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:14.314Z,1528875254.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:14.719Z,1528875254.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:15.122Z,1528875255.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:15.520Z,1528875255.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:15.913Z,1528875255.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:16.314Z,1528875256.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:16.719Z,1528875256.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:17.129Z,1528875257.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:17.129Z,1528875257.129 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83
2018-06-13T07:34:17.130Z,1528875257.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:34:17.131Z,1528875257.131 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:17.131Z,1528875257.131 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83
2018-06-13T07:34:17.131Z,1528875257.131 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:34:17.133Z,1528875257.133 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:17.133Z,1528875257.133 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 83
2018-06-13T07:34:17.133Z,1528875257.133 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:34:17.209Z,1528875257.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:34:17.209Z,1528875257.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:34:17.210Z,1528875257.210 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:34:17.621Z,1528875257.621 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:34:17.621Z,1528875257.621 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83
2018-06-13T07:34:17.621Z,1528875257.621 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:34:17.622Z,1528875257.622 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83
2018-06-13T07:34:17.622Z,1528875257.622 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:34:17.622Z,1528875257.622 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 83
2018-06-13T07:34:17.931Z,1528875257.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:34:17.931Z,1528875257.931 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:34:17.932Z,1528875257.932 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:34:17.932Z,1528875257.932 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:34:17.937Z,1528875257.937 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:34:17.937Z,1528875257.937 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:34:17.937Z,1528875257.937 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:34:17.938Z,1528875257.938 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:34:17.938Z,1528875257.938 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:34:18.316Z,1528875258.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:34:18.316Z,1528875258.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:18.744Z,1528875258.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:34:18.745Z,1528875258.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:19.138Z,1528875259.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:34:19.139Z,1528875259.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:19.522Z,1528875259.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:34:19.523Z,1528875259.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:19.915Z,1528875259.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:34:19.916Z,1528875259.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:20.312Z,1528875260.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:34:20.314Z,1528875260.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:20.719Z,1528875260.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:34:20.720Z,1528875260.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:21.122Z,1528875261.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:34:21.123Z,1528875261.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:21.519Z,1528875261.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:34:21.520Z,1528875261.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:21.913Z,1528875261.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:34:21.914Z,1528875261.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:22.314Z,1528875262.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:34:22.315Z,1528875262.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:22.719Z,1528875262.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:34:22.720Z,1528875262.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:23.122Z,1528875263.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:34:23.123Z,1528875263.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:23.523Z,1528875263.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:34:23.523Z,1528875263.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:23.914Z,1528875263.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:34:23.915Z,1528875263.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:24.312Z,1528875264.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:34:24.314Z,1528875264.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:24.722Z,1528875264.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:34:24.723Z,1528875264.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:25.123Z,1528875265.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:34:25.124Z,1528875265.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:25.519Z,1528875265.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:34:25.520Z,1528875265.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:25.917Z,1528875265.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:34:25.918Z,1528875265.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:26.313Z,1528875266.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:34:26.314Z,1528875266.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:26.719Z,1528875266.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:34:26.720Z,1528875266.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:27.145Z,1528875267.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:34:27.146Z,1528875267.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:27.523Z,1528875267.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:34:27.523Z,1528875267.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:27.920Z,1528875267.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:34:27.921Z,1528875267.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:28.315Z,1528875268.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:34:28.315Z,1528875268.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:28.719Z,1528875268.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:34:28.720Z,1528875268.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:29.122Z,1528875269.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:34:29.123Z,1528875269.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:29.522Z,1528875269.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:34:29.523Z,1528875269.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:29.915Z,1528875269.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:34:29.916Z,1528875269.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:30.314Z,1528875270.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:34:30.315Z,1528875270.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:30.722Z,1528875270.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:34:30.723Z,1528875270.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:31.122Z,1528875271.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:34:31.123Z,1528875271.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:31.518Z,1528875271.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:34:31.519Z,1528875271.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:31.918Z,1528875271.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:34:31.919Z,1528875271.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:32.315Z,1528875272.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:34:32.316Z,1528875272.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:32.719Z,1528875272.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:34:32.720Z,1528875272.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:33.122Z,1528875273.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:34:33.123Z,1528875273.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:33.519Z,1528875273.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:34:33.520Z,1528875273.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:33.916Z,1528875273.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:34:33.917Z,1528875273.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:34.321Z,1528875274.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:34:34.322Z,1528875274.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:34.718Z,1528875274.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:34:34.719Z,1528875274.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:35.124Z,1528875275.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:34:35.137Z,1528875275.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:35.550Z,1528875275.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:34:35.551Z,1528875275.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:35.911Z,1528875275.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:34:35.911Z,1528875275.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:36.313Z,1528875276.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:34:36.314Z,1528875276.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:36.716Z,1528875276.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:34:36.717Z,1528875276.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:37.120Z,1528875277.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T07:34:37.121Z,1528875277.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:37.528Z,1528875277.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:37.924Z,1528875277.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:38.313Z,1528875278.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:38.713Z,1528875278.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:39.126Z,1528875279.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:39.524Z,1528875279.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:39.925Z,1528875279.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:40.336Z,1528875280.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:40.721Z,1528875280.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:41.116Z,1528875281.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:41.524Z,1528875281.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:41.916Z,1528875281.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:42.317Z,1528875282.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:42.728Z,1528875282.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:43.125Z,1528875283.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:43.529Z,1528875283.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:43.936Z,1528875283.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:44.320Z,1528875284.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:44.716Z,1528875284.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:45.119Z,1528875285.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:45.512Z,1528875285.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:45.925Z,1528875285.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:46.330Z,1528875286.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:46.725Z,1528875286.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:47.116Z,1528875287.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:47.518Z,1528875287.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:47.912Z,1528875287.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:48.318Z,1528875288.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:48.719Z,1528875288.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:49.121Z,1528875289.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:49.528Z,1528875289.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:49.930Z,1528875289.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:50.312Z,1528875290.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:50.718Z,1528875290.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:51.122Z,1528875291.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:51.512Z,1528875291.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:51.925Z,1528875291.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:52.330Z,1528875292.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:52.728Z,1528875292.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:53.117Z,1528875293.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:53.519Z,1528875293.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:53.924Z,1528875293.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:54.317Z,1528875294.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:54.728Z,1528875294.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:55.126Z,1528875295.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:55.532Z,1528875295.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:58.666Z,1528875298.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:58.826Z,1528875298.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:59.217Z,1528875299.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:34:59.620Z,1528875299.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:00.017Z,1528875300.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:00.419Z,1528875300.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:00.826Z,1528875300.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:01.222Z,1528875301.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:01.621Z,1528875301.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:02.010Z,1528875302.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:02.400Z,1528875302.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:02.823Z,1528875302.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:03.230Z,1528875303.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:03.623Z,1528875303.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:04.021Z,1528875304.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:04.414Z,1528875304.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:04.811Z,1528875304.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:05.219Z,1528875305.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:05.619Z,1528875305.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:06.012Z,1528875306.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:06.410Z,1528875306.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:06.819Z,1528875306.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:07.215Z,1528875307.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:07.615Z,1528875307.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:08.012Z,1528875308.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:08.406Z,1528875308.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:08.815Z,1528875308.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:09.219Z,1528875309.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:09.616Z,1528875309.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:10.015Z,1528875310.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:10.411Z,1528875310.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:10.815Z,1528875310.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:11.241Z,1528875311.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:11.616Z,1528875311.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:12.007Z,1528875312.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:12.410Z,1528875312.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:12.820Z,1528875312.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:13.220Z,1528875313.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:13.620Z,1528875313.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:14.013Z,1528875314.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:14.406Z,1528875314.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:14.816Z,1528875314.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:15.219Z,1528875315.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:15.620Z,1528875315.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:16.007Z,1528875316.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:16.413Z,1528875316.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:16.814Z,1528875316.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:17.221Z,1528875317.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:17.622Z,1528875317.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:18.006Z,1528875318.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:18.420Z,1528875318.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:18.823Z,1528875318.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:19.218Z,1528875319.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:19.622Z,1528875319.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:20.015Z,1528875320.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:20.407Z,1528875320.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:20.828Z,1528875320.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:21.228Z,1528875321.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:21.618Z,1528875321.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:22.019Z,1528875322.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:22.422Z,1528875322.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:22.818Z,1528875322.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:23.229Z,1528875323.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:23.632Z,1528875323.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:24.024Z,1528875324.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:24.421Z,1528875324.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:24.827Z,1528875324.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:25.232Z,1528875325.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:25.631Z,1528875325.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:26.002Z,1528875326.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:26.400Z,1528875326.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:26.827Z,1528875326.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:27.232Z,1528875327.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:27.626Z,1528875327.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:28.008Z,1528875328.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:28.404Z,1528875328.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:28.811Z,1528875328.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:29.236Z,1528875329.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:29.615Z,1528875329.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:30.007Z,1528875330.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:30.405Z,1528875330.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:30.815Z,1528875330.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:31.212Z,1528875331.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:31.611Z,1528875331.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:32.009Z,1528875332.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:32.404Z,1528875332.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:32.811Z,1528875332.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:33.219Z,1528875333.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:33.611Z,1528875333.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:34.007Z,1528875334.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:34.419Z,1528875334.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:34.804Z,1528875334.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:35.212Z,1528875335.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:35.615Z,1528875335.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:36.012Z,1528875336.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:36.407Z,1528875336.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:36.816Z,1528875336.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:37.203Z,1528875337.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:37.606Z,1528875337.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:38.015Z,1528875338.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:38.416Z,1528875338.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:38.812Z,1528875338.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:39.207Z,1528875339.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:39.605Z,1528875339.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:40.007Z,1528875340.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:40.419Z,1528875340.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:40.805Z,1528875340.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:41.215Z,1528875341.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:41.617Z,1528875341.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:42.013Z,1528875342.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:42.408Z,1528875342.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:42.808Z,1528875342.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:43.207Z,1528875343.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:43.607Z,1528875343.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:44.024Z,1528875344.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:44.415Z,1528875344.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:44.815Z,1528875344.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:45.208Z,1528875345.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:45.606Z,1528875345.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:46.007Z,1528875346.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:46.413Z,1528875346.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:46.804Z,1528875346.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:47.215Z,1528875347.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:47.617Z,1528875347.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:48.016Z,1528875348.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:48.407Z,1528875348.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:48.821Z,1528875348.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:49.208Z,1528875349.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:49.608Z,1528875349.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:50.021Z,1528875350.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:50.418Z,1528875350.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:50.816Z,1528875350.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:51.222Z,1528875351.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:51.612Z,1528875351.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:52.016Z,1528875352.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:52.422Z,1528875352.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:52.800Z,1528875352.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:53.226Z,1528875353.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:53.625Z,1528875353.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:54.022Z,1528875354.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:54.400Z,1528875354.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:54.819Z,1528875354.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:55.228Z,1528875355.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:55.616Z,1528875355.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:56.015Z,1528875356.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:56.415Z,1528875356.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:56.836Z,1528875356.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:35:59.941Z,1528875359.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:00.098Z,1528875360.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:00.489Z,1528875360.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:00.894Z,1528875360.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:01.287Z,1528875361.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:01.688Z,1528875361.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:02.064Z,1528875362.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:02.464Z,1528875362.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:02.894Z,1528875362.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:03.294Z,1528875363.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:03.694Z,1528875363.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:04.069Z,1528875364.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:04.469Z,1528875364.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:04.897Z,1528875364.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:05.294Z,1528875365.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:05.700Z,1528875365.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:06.074Z,1528875366.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:06.472Z,1528875366.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:06.899Z,1528875366.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:07.298Z,1528875367.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:07.697Z,1528875367.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:08.074Z,1528875368.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:08.473Z,1528875368.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:08.902Z,1528875368.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:09.300Z,1528875369.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:09.704Z,1528875369.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:10.075Z,1528875370.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:10.471Z,1528875370.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:10.876Z,1528875370.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:11.288Z,1528875371.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:11.688Z,1528875371.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:12.076Z,1528875372.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:12.475Z,1528875372.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:12.883Z,1528875372.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:13.284Z,1528875373.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:13.684Z,1528875373.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:14.076Z,1528875374.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:14.472Z,1528875374.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:14.880Z,1528875374.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:15.284Z,1528875375.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:15.680Z,1528875375.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:16.074Z,1528875376.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:16.476Z,1528875376.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:16.872Z,1528875376.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:17.284Z,1528875377.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:17.688Z,1528875377.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:18.084Z,1528875378.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:18.475Z,1528875378.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:18.875Z,1528875378.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:19.273Z,1528875379.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:19.674Z,1528875379.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:20.084Z,1528875380.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:20.488Z,1528875380.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:20.884Z,1528875380.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:21.275Z,1528875381.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:21.674Z,1528875381.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:22.074Z,1528875382.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:22.472Z,1528875382.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:22.874Z,1528875382.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:23.234Z,1528875383.234 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T07:36:23.235Z,1528875383.235 [NAL9602] Data Fault, FailCount= 3
2018-06-13T07:36:23.235Z,1528875383.235 [NAL9602](ERROR): Data Fault
2018-06-13T07:36:23.300Z,1528875383.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:23.385Z,1528875383.385 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T07:36:23.634Z,1528875383.634 [NAL9602](INFO): Powering down
2018-06-13T07:36:23.688Z,1528875383.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:24.074Z,1528875384.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:24.476Z,1528875384.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:24.557Z,1528875384.557 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T07:36:24.557Z,1528875384.557 [NAL9602] No Fault, FailCount= 3
2018-06-13T07:36:24.876Z,1528875384.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:25.278Z,1528875385.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:25.675Z,1528875385.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:26.070Z,1528875386.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:26.474Z,1528875386.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:26.876Z,1528875386.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:27.275Z,1528875387.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:27.676Z,1528875387.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:28.076Z,1528875388.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:28.470Z,1528875388.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:28.876Z,1528875388.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:29.276Z,1528875389.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:29.670Z,1528875389.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:30.076Z,1528875390.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:30.475Z,1528875390.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:30.870Z,1528875390.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:31.274Z,1528875391.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:31.675Z,1528875391.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:32.071Z,1528875392.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:32.474Z,1528875392.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:32.875Z,1528875392.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:33.269Z,1528875393.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:33.676Z,1528875393.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:34.074Z,1528875394.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:34.476Z,1528875394.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:34.874Z,1528875394.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:35.275Z,1528875395.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:35.670Z,1528875395.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:36.075Z,1528875396.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:36.474Z,1528875396.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:36.874Z,1528875396.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:37.274Z,1528875397.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:37.675Z,1528875397.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:38.070Z,1528875398.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:38.476Z,1528875398.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:38.876Z,1528875398.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:39.276Z,1528875399.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:39.674Z,1528875399.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:40.075Z,1528875400.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:40.470Z,1528875400.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:40.876Z,1528875400.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:41.276Z,1528875401.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:41.676Z,1528875401.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:42.076Z,1528875402.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:42.474Z,1528875402.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:42.875Z,1528875402.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:43.276Z,1528875403.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:43.680Z,1528875403.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:44.076Z,1528875404.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:44.476Z,1528875404.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:44.877Z,1528875404.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:45.284Z,1528875405.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:45.676Z,1528875405.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:46.083Z,1528875406.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:46.475Z,1528875406.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:46.887Z,1528875406.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:47.278Z,1528875407.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:47.678Z,1528875407.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:48.072Z,1528875408.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:48.476Z,1528875408.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:48.874Z,1528875408.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:49.272Z,1528875409.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:49.673Z,1528875409.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:50.076Z,1528875410.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:50.475Z,1528875410.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:50.875Z,1528875410.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:51.274Z,1528875411.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:51.674Z,1528875411.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:52.075Z,1528875412.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:52.479Z,1528875412.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:52.874Z,1528875412.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:53.275Z,1528875413.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:53.674Z,1528875413.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:54.030Z,1528875414.030 [NAL9602](INFO): Powering up NAL9602
2018-06-13T07:36:54.078Z,1528875414.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:54.473Z,1528875414.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:54.876Z,1528875414.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:55.276Z,1528875415.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:55.688Z,1528875415.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:56.067Z,1528875416.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:56.472Z,1528875416.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:56.870Z,1528875416.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:36:59.998Z,1528875419.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:00.151Z,1528875420.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:00.547Z,1528875420.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:00.946Z,1528875420.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:01.333Z,1528875421.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:01.748Z,1528875421.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:02.132Z,1528875422.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:02.524Z,1528875422.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:02.932Z,1528875422.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:03.327Z,1528875423.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:03.726Z,1528875423.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:04.127Z,1528875424.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:04.553Z,1528875424.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:04.898Z,1528875424.898 [NAL9602](INFO): NAL9602 initialized
2018-06-13T07:37:04.932Z,1528875424.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:05.333Z,1528875425.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:05.757Z,1528875425.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:06.155Z,1528875426.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:06.558Z,1528875426.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:06.963Z,1528875426.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:07.331Z,1528875427.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:07.759Z,1528875427.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:08.143Z,1528875428.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:08.539Z,1528875428.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:08.936Z,1528875428.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:09.335Z,1528875429.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:09.740Z,1528875429.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:10.143Z,1528875430.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:10.543Z,1528875430.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:10.934Z,1528875430.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:11.336Z,1528875431.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:11.743Z,1528875431.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:12.139Z,1528875432.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:12.539Z,1528875432.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:12.936Z,1528875432.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:13.337Z,1528875433.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:13.744Z,1528875433.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:14.143Z,1528875434.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:14.539Z,1528875434.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:14.946Z,1528875434.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:15.343Z,1528875435.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:15.744Z,1528875435.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:16.148Z,1528875436.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:16.544Z,1528875436.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:16.942Z,1528875436.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:17.336Z,1528875437.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:17.745Z,1528875437.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:18.143Z,1528875438.143 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:18.143Z,1528875438.143 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84
2018-06-13T07:37:18.143Z,1528875438.143 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:37:18.146Z,1528875438.146 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:18.146Z,1528875438.146 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84
2018-06-13T07:37:18.146Z,1528875438.146 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:37:18.148Z,1528875438.148 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:18.148Z,1528875438.148 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 84
2018-06-13T07:37:18.148Z,1528875438.148 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:37:18.225Z,1528875438.225 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:37:18.225Z,1528875438.225 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:37:18.226Z,1528875438.226 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:37:18.621Z,1528875438.621 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:37:18.621Z,1528875438.621 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84
2018-06-13T07:37:18.622Z,1528875438.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:37:18.622Z,1528875438.622 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84
2018-06-13T07:37:18.622Z,1528875438.622 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:37:18.622Z,1528875438.622 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 84
2018-06-13T07:37:18.943Z,1528875438.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:37:18.944Z,1528875438.944 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:37:18.944Z,1528875438.944 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:37:18.944Z,1528875438.944 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:37:18.945Z,1528875438.945 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:37:18.945Z,1528875438.945 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:37:18.946Z,1528875438.946 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:37:18.946Z,1528875438.946 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:37:18.946Z,1528875438.946 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:37:19.345Z,1528875439.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:37:19.346Z,1528875439.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:19.746Z,1528875439.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:37:19.747Z,1528875439.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:20.156Z,1528875440.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:37:20.156Z,1528875440.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:20.544Z,1528875440.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:37:20.545Z,1528875440.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:20.947Z,1528875440.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:37:20.948Z,1528875440.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:21.348Z,1528875441.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:37:21.349Z,1528875441.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:21.746Z,1528875441.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:37:21.747Z,1528875441.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:22.147Z,1528875442.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:37:22.148Z,1528875442.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:22.550Z,1528875442.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:37:22.551Z,1528875442.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:22.941Z,1528875442.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:37:22.942Z,1528875442.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:23.342Z,1528875443.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:37:23.343Z,1528875443.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:23.750Z,1528875443.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:37:23.751Z,1528875443.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:24.146Z,1528875444.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:37:24.147Z,1528875444.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:24.543Z,1528875444.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:37:24.544Z,1528875444.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:24.944Z,1528875444.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:37:24.945Z,1528875444.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:25.340Z,1528875445.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:37:25.341Z,1528875445.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:25.746Z,1528875445.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:37:25.747Z,1528875445.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:26.150Z,1528875446.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:37:26.151Z,1528875446.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:26.552Z,1528875446.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:37:26.553Z,1528875446.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:26.945Z,1528875446.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:37:26.946Z,1528875446.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:27.348Z,1528875447.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:37:27.349Z,1528875447.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:27.752Z,1528875447.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:37:27.753Z,1528875447.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:28.150Z,1528875448.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:37:28.151Z,1528875448.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:28.551Z,1528875448.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:37:28.552Z,1528875448.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:28.951Z,1528875448.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:37:28.952Z,1528875448.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:29.350Z,1528875449.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:37:29.351Z,1528875449.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:29.751Z,1528875449.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:37:29.751Z,1528875449.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:30.157Z,1528875450.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:37:30.158Z,1528875450.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:30.550Z,1528875450.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:37:30.551Z,1528875450.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:30.951Z,1528875450.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:37:30.952Z,1528875450.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:31.326Z,1528875451.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:37:31.327Z,1528875451.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:31.758Z,1528875451.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:37:31.759Z,1528875451.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:32.163Z,1528875452.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:37:32.164Z,1528875452.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:32.560Z,1528875452.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:37:32.561Z,1528875452.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:32.929Z,1528875452.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:37:32.930Z,1528875452.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:33.360Z,1528875453.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:37:33.365Z,1528875453.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:33.739Z,1528875453.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:37:33.740Z,1528875453.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:34.165Z,1528875454.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:37:34.166Z,1528875454.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:34.548Z,1528875454.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:37:34.569Z,1528875454.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:34.935Z,1528875454.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:37:34.936Z,1528875454.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:35.333Z,1528875455.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:37:35.334Z,1528875455.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:35.743Z,1528875455.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:37:35.744Z,1528875455.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:36.144Z,1528875456.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:37:36.145Z,1528875456.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:36.544Z,1528875456.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:37:36.545Z,1528875456.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:36.940Z,1528875456.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:37:36.941Z,1528875456.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:37.340Z,1528875457.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:37:37.341Z,1528875457.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:37.748Z,1528875457.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:37:37.749Z,1528875457.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:38.152Z,1528875458.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:38.541Z,1528875458.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:38.936Z,1528875458.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:39.345Z,1528875459.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:39.745Z,1528875459.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:40.148Z,1528875460.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:40.556Z,1528875460.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:40.937Z,1528875460.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:41.337Z,1528875461.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:41.748Z,1528875461.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:42.145Z,1528875462.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:42.549Z,1528875462.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:42.950Z,1528875462.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:43.342Z,1528875463.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:43.737Z,1528875463.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:44.140Z,1528875464.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:44.536Z,1528875464.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:44.945Z,1528875464.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:45.350Z,1528875465.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:45.746Z,1528875465.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:46.136Z,1528875466.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:46.540Z,1528875466.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:46.940Z,1528875466.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:47.337Z,1528875467.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:47.740Z,1528875467.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:48.141Z,1528875468.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:48.549Z,1528875468.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:48.956Z,1528875468.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:49.336Z,1528875469.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:49.742Z,1528875469.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:50.148Z,1528875470.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:50.548Z,1528875470.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:50.945Z,1528875470.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:51.356Z,1528875471.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:51.745Z,1528875471.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:52.144Z,1528875472.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:52.542Z,1528875472.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:52.928Z,1528875472.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:53.350Z,1528875473.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:53.745Z,1528875473.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:54.154Z,1528875474.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:54.551Z,1528875474.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:54.953Z,1528875474.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:54.956Z,1528875474.956 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T07:37:54.956Z,1528875474.956 [Default:CheckIn:C.Wait] Stopped
2018-06-13T07:37:54.956Z,1528875474.956 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T07:37:54.956Z,1528875474.956 [Default:CheckIn:D] Running Loop=1
2018-06-13T07:37:55.340Z,1528875475.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:55.343Z,1528875475.343 [Default:CheckIn:D] Stopped
2018-06-13T07:37:55.343Z,1528875475.343 [Default:CheckIn:E] Running Loop=1
2018-06-13T07:37:55.736Z,1528875475.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:55.739Z,1528875475.739 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 250.698307 min 
2018-06-13T07:37:55.740Z,1528875475.740 [Default:CheckIn:E] Stopped
2018-06-13T07:37:55.740Z,1528875475.740 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T07:37:55.740Z,1528875475.740 [Default:CheckIn] Stopped
2018-06-13T07:37:55.740Z,1528875475.740 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T07:37:55.740Z,1528875475.740 [Default:CheckIn](INFO): Running loop #25
2018-06-13T07:37:55.740Z,1528875475.740 [Default:CheckIn] Running Loop=25
2018-06-13T07:37:55.740Z,1528875475.740 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T07:37:55.740Z,1528875475.740 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T07:37:56.140Z,1528875476.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:56.536Z,1528875476.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:56.945Z,1528875476.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:57.354Z,1528875477.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:57.745Z,1528875477.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:58.138Z,1528875478.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:37:58.540Z,1528875478.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:01.656Z,1528875481.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:01.812Z,1528875481.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:02.207Z,1528875482.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:02.601Z,1528875482.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:02.998Z,1528875482.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:03.402Z,1528875483.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:03.796Z,1528875483.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:04.190Z,1528875484.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:04.608Z,1528875484.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:05.011Z,1528875485.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:05.407Z,1528875485.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:05.810Z,1528875485.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:06.185Z,1528875486.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:06.583Z,1528875486.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:06.985Z,1528875486.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:07.379Z,1528875487.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:07.809Z,1528875487.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:08.210Z,1528875488.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:08.609Z,1528875488.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:09.009Z,1528875489.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:09.385Z,1528875489.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:09.807Z,1528875489.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:10.215Z,1528875490.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:10.619Z,1528875490.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:10.986Z,1528875490.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:11.386Z,1528875491.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:11.816Z,1528875491.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:12.215Z,1528875492.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:12.607Z,1528875492.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:12.990Z,1528875492.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:13.385Z,1528875493.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:13.799Z,1528875493.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:14.200Z,1528875494.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:14.596Z,1528875494.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:15.000Z,1528875495.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:15.385Z,1528875495.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:15.795Z,1528875495.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:16.191Z,1528875496.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:16.588Z,1528875496.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:16.994Z,1528875496.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:17.405Z,1528875497.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:17.799Z,1528875497.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:18.184Z,1528875498.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:18.592Z,1528875498.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:18.987Z,1528875498.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:19.385Z,1528875499.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:19.800Z,1528875499.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:20.192Z,1528875500.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:20.592Z,1528875500.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:20.996Z,1528875500.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:21.387Z,1528875501.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:21.784Z,1528875501.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:22.188Z,1528875502.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:22.588Z,1528875502.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:22.991Z,1528875502.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:23.395Z,1528875503.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:23.795Z,1528875503.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:24.184Z,1528875504.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:24.593Z,1528875504.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:24.987Z,1528875504.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:25.390Z,1528875505.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:25.792Z,1528875505.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:26.195Z,1528875506.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:26.596Z,1528875506.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:26.996Z,1528875506.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:27.388Z,1528875507.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:27.784Z,1528875507.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:28.198Z,1528875508.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:28.590Z,1528875508.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:29.001Z,1528875509.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:29.403Z,1528875509.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:29.798Z,1528875509.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:30.205Z,1528875510.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:30.595Z,1528875510.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:30.996Z,1528875510.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:31.393Z,1528875511.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:31.793Z,1528875511.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:32.200Z,1528875512.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:32.601Z,1528875512.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:32.998Z,1528875512.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:33.396Z,1528875513.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:33.794Z,1528875513.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:34.194Z,1528875514.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:34.584Z,1528875514.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:34.999Z,1528875514.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:35.402Z,1528875515.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:35.805Z,1528875515.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:36.176Z,1528875516.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:36.580Z,1528875516.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:36.981Z,1528875516.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:37.384Z,1528875517.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:37.784Z,1528875517.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:38.218Z,1528875518.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:38.608Z,1528875518.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:39.011Z,1528875519.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:39.385Z,1528875519.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:39.783Z,1528875519.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:40.188Z,1528875520.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:40.583Z,1528875520.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:41.013Z,1528875521.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:41.413Z,1528875521.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:41.814Z,1528875521.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:42.184Z,1528875522.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:42.583Z,1528875522.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:42.979Z,1528875522.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:43.388Z,1528875523.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:43.788Z,1528875523.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:44.218Z,1528875524.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:44.615Z,1528875524.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:44.995Z,1528875524.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:45.392Z,1528875525.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:45.786Z,1528875525.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:46.186Z,1528875526.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:46.586Z,1528875526.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:46.995Z,1528875526.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:47.417Z,1528875527.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:47.822Z,1528875527.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:48.187Z,1528875528.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:48.587Z,1528875528.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:48.978Z,1528875528.978 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T07:38:48.978Z,1528875528.978 [BPC1] Communications Fault, FailCount= 4
2018-06-13T07:38:48.979Z,1528875528.979 [BPC1](ERROR): Communications Fault
2018-06-13T07:38:48.992Z,1528875528.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:49.097Z,1528875529.097 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T07:38:49.388Z,1528875529.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:49.787Z,1528875529.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:50.195Z,1528875530.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:50.297Z,1528875530.297 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T07:38:50.297Z,1528875530.297 [BPC1] No Fault, FailCount= 4
2018-06-13T07:38:50.666Z,1528875530.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:50.996Z,1528875530.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:51.398Z,1528875531.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:51.792Z,1528875531.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:52.189Z,1528875532.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:52.591Z,1528875532.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:52.992Z,1528875532.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:53.395Z,1528875533.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:53.799Z,1528875533.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:54.186Z,1528875534.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:54.589Z,1528875534.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:54.997Z,1528875534.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:55.386Z,1528875535.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:55.791Z,1528875535.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:58.924Z,1528875538.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:59.089Z,1528875539.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:59.477Z,1528875539.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:38:59.876Z,1528875539.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:00.274Z,1528875540.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:00.673Z,1528875540.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:01.086Z,1528875541.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:01.487Z,1528875541.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:01.887Z,1528875541.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:02.260Z,1528875542.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:02.687Z,1528875542.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:03.078Z,1528875543.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:03.463Z,1528875543.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:03.884Z,1528875543.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:04.289Z,1528875544.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:04.695Z,1528875544.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:05.056Z,1528875545.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:05.468Z,1528875545.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:05.864Z,1528875545.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:06.263Z,1528875546.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:06.670Z,1528875546.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:07.071Z,1528875547.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:07.465Z,1528875547.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:07.868Z,1528875547.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:08.264Z,1528875548.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:08.662Z,1528875548.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:09.067Z,1528875549.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:09.471Z,1528875549.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:09.871Z,1528875549.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:10.268Z,1528875550.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:10.664Z,1528875550.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:11.067Z,1528875551.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:11.462Z,1528875551.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:11.863Z,1528875551.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:12.268Z,1528875552.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:12.670Z,1528875552.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:13.071Z,1528875553.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:13.462Z,1528875553.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:13.861Z,1528875553.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:14.263Z,1528875554.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:14.660Z,1528875554.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:15.071Z,1528875555.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:15.471Z,1528875555.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:15.868Z,1528875555.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:16.263Z,1528875556.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:16.663Z,1528875556.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:17.062Z,1528875557.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:17.464Z,1528875557.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:17.864Z,1528875557.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:18.272Z,1528875558.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:18.670Z,1528875558.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:19.072Z,1528875559.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:19.460Z,1528875559.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:19.864Z,1528875559.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:20.264Z,1528875560.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:20.670Z,1528875560.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:21.073Z,1528875561.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:21.476Z,1528875561.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:21.868Z,1528875561.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:22.263Z,1528875562.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:22.664Z,1528875562.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:23.060Z,1528875563.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:23.465Z,1528875563.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:23.876Z,1528875563.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:24.269Z,1528875564.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:24.676Z,1528875564.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:25.073Z,1528875565.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:25.460Z,1528875565.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:25.865Z,1528875565.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:26.268Z,1528875566.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:26.661Z,1528875566.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:27.071Z,1528875567.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:27.472Z,1528875567.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:27.869Z,1528875567.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:28.264Z,1528875568.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:28.677Z,1528875568.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:29.063Z,1528875569.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:29.463Z,1528875569.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:29.868Z,1528875569.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:30.269Z,1528875570.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:30.677Z,1528875570.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:31.077Z,1528875571.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:31.471Z,1528875571.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:31.864Z,1528875571.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:32.272Z,1528875572.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:32.668Z,1528875572.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:33.073Z,1528875573.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:33.478Z,1528875573.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:33.869Z,1528875573.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:34.268Z,1528875574.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:34.673Z,1528875574.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:35.070Z,1528875575.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:35.470Z,1528875575.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:35.872Z,1528875575.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:36.275Z,1528875576.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:36.680Z,1528875576.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:37.079Z,1528875577.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:37.474Z,1528875577.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:37.873Z,1528875577.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:38.274Z,1528875578.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:38.657Z,1528875578.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:39.079Z,1528875579.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:39.488Z,1528875579.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:39.879Z,1528875579.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:40.269Z,1528875580.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:40.666Z,1528875580.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:41.058Z,1528875581.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:41.469Z,1528875581.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:41.864Z,1528875581.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:42.264Z,1528875582.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:42.671Z,1528875582.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:43.096Z,1528875583.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:43.463Z,1528875583.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:43.863Z,1528875583.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:44.265Z,1528875584.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:44.660Z,1528875584.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:45.069Z,1528875585.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:45.468Z,1528875585.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:45.869Z,1528875585.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:46.263Z,1528875586.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:46.667Z,1528875586.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:47.061Z,1528875587.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:47.463Z,1528875587.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:47.877Z,1528875587.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:48.269Z,1528875588.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:48.672Z,1528875588.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:49.084Z,1528875589.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:49.464Z,1528875589.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:49.865Z,1528875589.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:50.268Z,1528875590.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:50.664Z,1528875590.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:51.113Z,1528875591.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:51.478Z,1528875591.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:51.872Z,1528875591.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:52.264Z,1528875592.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:52.674Z,1528875592.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:53.073Z,1528875593.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:53.473Z,1528875593.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:53.873Z,1528875593.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:54.279Z,1528875594.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:54.684Z,1528875594.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:55.085Z,1528875595.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:55.456Z,1528875595.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:55.864Z,1528875595.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:59.016Z,1528875599.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:59.195Z,1528875599.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:59.593Z,1528875599.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:39:59.995Z,1528875599.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:00.393Z,1528875600.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:00.788Z,1528875600.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:01.191Z,1528875601.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:01.600Z,1528875601.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:01.998Z,1528875601.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:02.397Z,1528875602.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:02.799Z,1528875602.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:03.200Z,1528875603.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:03.643Z,1528875603.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:04.016Z,1528875604.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:04.387Z,1528875604.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:04.787Z,1528875604.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:05.178Z,1528875605.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:05.578Z,1528875605.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:05.988Z,1528875605.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:06.387Z,1528875606.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:06.783Z,1528875606.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:07.184Z,1528875607.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:07.575Z,1528875607.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:07.984Z,1528875607.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:08.387Z,1528875608.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:08.783Z,1528875608.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:09.178Z,1528875609.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:09.584Z,1528875609.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:09.983Z,1528875609.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:10.387Z,1528875610.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:10.792Z,1528875610.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:11.179Z,1528875611.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:11.579Z,1528875611.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:11.988Z,1528875611.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:12.387Z,1528875612.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:12.790Z,1528875612.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:13.186Z,1528875613.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:13.577Z,1528875613.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:13.988Z,1528875613.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:14.388Z,1528875614.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:14.789Z,1528875614.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:15.181Z,1528875615.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:15.584Z,1528875615.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:15.988Z,1528875615.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:16.395Z,1528875616.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:16.824Z,1528875616.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:17.179Z,1528875617.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:17.581Z,1528875617.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:18.000Z,1528875618.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:18.396Z,1528875618.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:18.792Z,1528875618.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:19.180Z,1528875619.180 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:19.180Z,1528875619.180 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85
2018-06-13T07:40:19.181Z,1528875619.181 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:40:19.182Z,1528875619.182 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:19.183Z,1528875619.183 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85
2018-06-13T07:40:19.183Z,1528875619.183 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:40:19.184Z,1528875619.184 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:19.184Z,1528875619.184 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 85
2018-06-13T07:40:19.185Z,1528875619.185 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:40:19.261Z,1528875619.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:40:19.261Z,1528875619.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:40:19.262Z,1528875619.262 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:40:19.665Z,1528875619.665 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:40:19.665Z,1528875619.665 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85
2018-06-13T07:40:19.666Z,1528875619.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:40:19.666Z,1528875619.666 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85
2018-06-13T07:40:19.666Z,1528875619.666 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:40:19.666Z,1528875619.666 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 85
2018-06-13T07:40:19.983Z,1528875619.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:40:19.984Z,1528875619.984 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:40:19.984Z,1528875619.984 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:40:19.984Z,1528875619.984 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:40:19.985Z,1528875619.985 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:40:19.985Z,1528875619.985 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:40:19.986Z,1528875619.986 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:40:19.986Z,1528875619.986 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:40:19.986Z,1528875619.986 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:40:20.402Z,1528875620.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:40:20.403Z,1528875620.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:20.788Z,1528875620.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:40:20.790Z,1528875620.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:21.189Z,1528875621.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:40:21.190Z,1528875621.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:21.591Z,1528875621.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:40:21.592Z,1528875621.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:21.980Z,1528875621.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:40:21.985Z,1528875621.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:22.396Z,1528875622.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:40:22.396Z,1528875622.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:22.797Z,1528875622.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:40:22.798Z,1528875622.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:23.190Z,1528875623.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:40:23.191Z,1528875623.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:23.588Z,1528875623.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:40:23.588Z,1528875623.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:23.981Z,1528875623.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:40:23.982Z,1528875623.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:24.376Z,1528875624.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:40:24.393Z,1528875624.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:24.780Z,1528875624.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:40:24.797Z,1528875624.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:25.203Z,1528875625.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:40:25.204Z,1528875625.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:25.587Z,1528875625.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:40:25.588Z,1528875625.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:25.983Z,1528875625.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:40:25.984Z,1528875625.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:26.382Z,1528875626.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:40:26.383Z,1528875626.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:26.778Z,1528875626.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:40:26.779Z,1528875626.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:27.181Z,1528875627.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:40:27.182Z,1528875627.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:27.592Z,1528875627.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:40:27.593Z,1528875627.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:27.988Z,1528875627.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:40:27.989Z,1528875627.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:28.400Z,1528875628.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:40:28.402Z,1528875628.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:28.817Z,1528875628.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:40:28.818Z,1528875628.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:29.208Z,1528875629.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:40:29.209Z,1528875629.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:29.582Z,1528875629.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:40:29.583Z,1528875629.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:29.985Z,1528875629.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:40:29.986Z,1528875629.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:30.382Z,1528875630.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:40:30.383Z,1528875630.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:30.792Z,1528875630.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:40:30.797Z,1528875630.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:31.200Z,1528875631.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:40:31.201Z,1528875631.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:31.592Z,1528875631.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:40:31.593Z,1528875631.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:31.995Z,1528875631.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:40:31.996Z,1528875631.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:32.389Z,1528875632.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:40:32.390Z,1528875632.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:32.786Z,1528875632.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:40:32.787Z,1528875632.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:33.189Z,1528875633.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:40:33.190Z,1528875633.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:33.588Z,1528875633.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:40:33.589Z,1528875633.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:33.992Z,1528875633.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:40:33.993Z,1528875633.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:34.391Z,1528875634.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:40:34.392Z,1528875634.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:34.792Z,1528875634.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:40:34.794Z,1528875634.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:35.186Z,1528875635.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:40:35.187Z,1528875635.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:35.588Z,1528875635.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:40:35.593Z,1528875635.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:35.992Z,1528875635.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:40:35.993Z,1528875635.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:36.389Z,1528875636.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:40:36.390Z,1528875636.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:36.796Z,1528875636.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:40:36.801Z,1528875636.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:37.208Z,1528875637.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:40:37.209Z,1528875637.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:37.598Z,1528875637.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:40:37.599Z,1528875637.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:38.003Z,1528875638.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:40:38.004Z,1528875638.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:38.375Z,1528875638.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:40:38.376Z,1528875638.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:38.776Z,1528875638.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:40:38.777Z,1528875638.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:39.184Z,1528875639.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:39.579Z,1528875639.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:39.980Z,1528875639.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:40.383Z,1528875640.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:40.787Z,1528875640.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:41.183Z,1528875641.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:41.584Z,1528875641.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:41.992Z,1528875641.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:42.379Z,1528875642.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:42.778Z,1528875642.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:43.187Z,1528875643.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:43.587Z,1528875643.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:43.988Z,1528875643.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:44.380Z,1528875644.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:44.778Z,1528875644.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:45.178Z,1528875645.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:45.579Z,1528875645.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:45.978Z,1528875645.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:46.388Z,1528875646.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:46.786Z,1528875646.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:47.188Z,1528875647.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:47.579Z,1528875647.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:47.979Z,1528875647.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:48.384Z,1528875648.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:48.778Z,1528875648.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:49.188Z,1528875649.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:49.587Z,1528875649.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:49.988Z,1528875649.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:50.380Z,1528875650.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:50.778Z,1528875650.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:51.184Z,1528875651.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:51.579Z,1528875651.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:51.978Z,1528875651.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:52.388Z,1528875652.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:52.787Z,1528875652.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:53.187Z,1528875653.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:53.580Z,1528875653.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:53.980Z,1528875653.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:54.386Z,1528875654.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:54.796Z,1528875654.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:55.190Z,1528875655.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:55.591Z,1528875655.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:55.992Z,1528875655.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:59.095Z,1528875659.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:59.276Z,1528875659.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:40:59.671Z,1528875659.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:00.080Z,1528875660.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:00.455Z,1528875660.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:00.843Z,1528875660.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:01.245Z,1528875661.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:01.644Z,1528875661.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:02.055Z,1528875662.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:02.455Z,1528875662.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:02.855Z,1528875662.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:03.252Z,1528875663.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:03.644Z,1528875663.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:04.055Z,1528875664.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:04.455Z,1528875664.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:04.855Z,1528875664.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:05.247Z,1528875665.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:05.652Z,1528875665.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:06.047Z,1528875666.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:06.451Z,1528875666.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:06.855Z,1528875666.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:07.281Z,1528875667.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:07.680Z,1528875667.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:08.047Z,1528875668.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:08.449Z,1528875668.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:08.846Z,1528875668.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:09.251Z,1528875669.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:09.655Z,1528875669.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:10.052Z,1528875670.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:10.446Z,1528875670.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:10.848Z,1528875670.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:11.246Z,1528875671.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:11.646Z,1528875671.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:12.047Z,1528875672.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:12.459Z,1528875672.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:12.855Z,1528875672.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:13.255Z,1528875673.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:13.648Z,1528875673.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:14.046Z,1528875674.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:14.454Z,1528875674.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:14.845Z,1528875674.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:15.260Z,1528875675.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:15.656Z,1528875675.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:16.054Z,1528875676.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:16.449Z,1528875676.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:16.865Z,1528875676.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:17.248Z,1528875677.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:17.649Z,1528875677.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:18.066Z,1528875678.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:18.454Z,1528875678.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:18.861Z,1528875678.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:19.263Z,1528875679.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:19.650Z,1528875679.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:20.048Z,1528875680.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:20.458Z,1528875680.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:20.856Z,1528875680.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:21.256Z,1528875681.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:21.663Z,1528875681.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:22.055Z,1528875682.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:22.456Z,1528875682.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:22.858Z,1528875682.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:23.261Z,1528875683.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:23.657Z,1528875683.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:24.056Z,1528875684.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:24.464Z,1528875684.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:24.862Z,1528875684.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:25.272Z,1528875685.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:25.640Z,1528875685.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:26.040Z,1528875686.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:26.443Z,1528875686.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:26.840Z,1528875686.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:27.266Z,1528875687.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:27.675Z,1528875687.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:28.055Z,1528875688.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:28.443Z,1528875688.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:28.848Z,1528875688.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:29.248Z,1528875689.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:29.648Z,1528875689.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:30.048Z,1528875690.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:30.447Z,1528875690.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:30.854Z,1528875690.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:31.279Z,1528875691.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:31.643Z,1528875691.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:32.048Z,1528875692.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:32.443Z,1528875692.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:32.841Z,1528875692.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:33.276Z,1528875693.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:33.655Z,1528875693.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:34.051Z,1528875694.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:34.452Z,1528875694.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:34.852Z,1528875694.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:35.252Z,1528875695.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:35.646Z,1528875695.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:36.047Z,1528875696.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:36.448Z,1528875696.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:36.855Z,1528875696.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:37.255Z,1528875697.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:37.646Z,1528875697.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:38.046Z,1528875698.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:38.455Z,1528875698.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:38.844Z,1528875698.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:39.251Z,1528875699.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:39.655Z,1528875699.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:40.052Z,1528875700.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:40.452Z,1528875700.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:40.858Z,1528875700.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:41.244Z,1528875701.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:41.648Z,1528875701.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:42.059Z,1528875702.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:42.452Z,1528875702.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:42.855Z,1528875702.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:43.255Z,1528875703.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:43.644Z,1528875703.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:44.047Z,1528875704.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:44.458Z,1528875704.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:44.848Z,1528875704.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:45.255Z,1528875705.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:45.657Z,1528875705.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:46.053Z,1528875706.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:46.448Z,1528875706.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:46.848Z,1528875706.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:47.247Z,1528875707.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:47.658Z,1528875707.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:48.061Z,1528875708.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:48.455Z,1528875708.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:48.859Z,1528875708.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:49.262Z,1528875709.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:49.654Z,1528875709.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:50.054Z,1528875710.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:50.458Z,1528875710.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:50.836Z,1528875710.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:51.268Z,1528875711.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:51.663Z,1528875711.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:52.068Z,1528875712.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:52.462Z,1528875712.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:52.858Z,1528875712.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:53.241Z,1528875713.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:53.656Z,1528875713.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:54.064Z,1528875714.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:54.476Z,1528875714.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:54.873Z,1528875714.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:55.276Z,1528875715.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:55.645Z,1528875715.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:56.052Z,1528875716.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:56.473Z,1528875716.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:56.847Z,1528875716.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:57.292Z,1528875717.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:57.655Z,1528875717.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:58.052Z,1528875718.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:58.446Z,1528875718.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:41:58.848Z,1528875718.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:01.952Z,1528875721.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:02.104Z,1528875722.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:02.513Z,1528875722.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:02.901Z,1528875722.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:03.301Z,1528875723.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:03.699Z,1528875723.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:04.093Z,1528875724.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:04.489Z,1528875724.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:04.891Z,1528875724.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:05.298Z,1528875725.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:05.700Z,1528875725.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:06.102Z,1528875726.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:06.488Z,1528875726.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:06.888Z,1528875726.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:07.290Z,1528875727.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:07.693Z,1528875727.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:08.094Z,1528875728.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:08.502Z,1528875728.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:08.898Z,1528875728.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:09.297Z,1528875729.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:09.696Z,1528875729.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:10.097Z,1528875730.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:10.497Z,1528875730.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:10.897Z,1528875730.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:11.306Z,1528875731.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:11.703Z,1528875731.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:12.107Z,1528875732.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:12.480Z,1528875732.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:12.884Z,1528875732.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:13.283Z,1528875733.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:13.688Z,1528875733.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:14.084Z,1528875734.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:14.511Z,1528875734.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:14.908Z,1528875734.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:15.308Z,1528875735.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:15.683Z,1528875735.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:16.079Z,1528875736.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:16.488Z,1528875736.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:16.885Z,1528875736.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:17.311Z,1528875737.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:17.695Z,1528875737.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:18.095Z,1528875738.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:18.488Z,1528875738.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:18.892Z,1528875738.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:19.292Z,1528875739.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:19.683Z,1528875739.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:20.085Z,1528875740.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:20.495Z,1528875740.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:20.896Z,1528875740.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:21.291Z,1528875741.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:21.698Z,1528875741.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:22.084Z,1528875742.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:22.487Z,1528875742.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:22.887Z,1528875742.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:23.303Z,1528875743.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:23.696Z,1528875743.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:24.100Z,1528875744.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:24.484Z,1528875744.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:24.886Z,1528875744.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:25.287Z,1528875745.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:25.688Z,1528875745.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:26.086Z,1528875746.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:26.497Z,1528875746.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:26.896Z,1528875746.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:27.296Z,1528875747.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:27.692Z,1528875747.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:28.086Z,1528875748.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:28.494Z,1528875748.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:28.891Z,1528875748.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:29.296Z,1528875749.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:29.700Z,1528875749.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:30.096Z,1528875750.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:30.485Z,1528875750.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:30.890Z,1528875750.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:31.288Z,1528875751.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:31.686Z,1528875751.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:32.089Z,1528875752.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:32.500Z,1528875752.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:32.900Z,1528875752.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:33.304Z,1528875753.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:33.688Z,1528875753.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:34.089Z,1528875754.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:34.493Z,1528875754.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:34.897Z,1528875754.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:35.298Z,1528875755.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:35.701Z,1528875755.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:36.102Z,1528875756.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:36.486Z,1528875756.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:36.890Z,1528875756.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:37.289Z,1528875757.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:37.689Z,1528875757.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:38.096Z,1528875758.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:38.503Z,1528875758.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:38.898Z,1528875758.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:39.301Z,1528875759.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:39.687Z,1528875759.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:40.092Z,1528875760.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:40.500Z,1528875760.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:40.895Z,1528875760.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:41.297Z,1528875761.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:41.701Z,1528875761.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:42.112Z,1528875762.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:42.488Z,1528875762.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:42.896Z,1528875762.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:43.291Z,1528875763.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:43.688Z,1528875763.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:44.092Z,1528875764.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:44.501Z,1528875764.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:44.896Z,1528875764.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:45.299Z,1528875765.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:45.698Z,1528875765.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:46.092Z,1528875766.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:46.493Z,1528875766.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:46.892Z,1528875766.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:47.296Z,1528875767.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:47.704Z,1528875767.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:48.112Z,1528875768.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:48.488Z,1528875768.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:48.896Z,1528875768.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:49.289Z,1528875769.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:49.690Z,1528875769.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:50.092Z,1528875770.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:50.502Z,1528875770.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:50.898Z,1528875770.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:51.301Z,1528875771.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:51.691Z,1528875771.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:52.108Z,1528875772.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:52.491Z,1528875772.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:52.892Z,1528875772.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:53.301Z,1528875773.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:53.718Z,1528875773.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:54.112Z,1528875774.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:54.493Z,1528875774.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:54.893Z,1528875774.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:55.295Z,1528875775.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:55.695Z,1528875775.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:56.093Z,1528875776.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:42:56.097Z,1528875776.097 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T07:37:55.7Z
2018-06-13T07:42:56.097Z,1528875776.097 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T07:42:56.097Z,1528875776.097 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T07:42:59.216Z,1528875779.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:00.251Z,1528875780.251 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0100.lzma
2018-06-13T07:43:00.313Z,1528875780.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:00.491Z,1528875780.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:00.814Z,1528875780.814 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0100.lzma.bak
2018-06-13T07:43:00.814Z,1528875780.814 [DataOverHttps](INFO): SBD MOMSN=8328835
2018-06-13T07:43:00.894Z,1528875780.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:02.769Z,1528875782.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:02.939Z,1528875782.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:03.339Z,1528875783.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:03.748Z,1528875783.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:04.140Z,1528875784.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:04.517Z,1528875784.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:04.920Z,1528875784.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:05.319Z,1528875785.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:05.740Z,1528875785.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:06.123Z,1528875786.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:06.543Z,1528875786.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:06.947Z,1528875786.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:10.045Z,1528875790.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:10.207Z,1528875790.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:10.600Z,1528875790.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:10.998Z,1528875790.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:11.404Z,1528875791.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:11.807Z,1528875791.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:14.916Z,1528875794.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:15.006Z,1528875795.006 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0101.lzma
2018-06-13T07:43:15.076Z,1528875795.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:15.459Z,1528875795.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:15.806Z,1528875795.806 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0101.lzma.bak
2018-06-13T07:43:15.806Z,1528875795.806 [DataOverHttps](INFO): SBD MOMSN=8328837
2018-06-13T07:43:15.864Z,1528875795.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:17.808Z,1528875797.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:17.811Z,1528875797.811 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T07:43:17.811Z,1528875797.811 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T07:43:17.811Z,1528875797.811 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T07:43:17.980Z,1528875797.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:18.368Z,1528875798.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:21.480Z,1528875801.480 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:21.480Z,1528875801.480 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86
2018-06-13T07:43:21.480Z,1528875801.480 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:43:21.482Z,1528875801.482 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:21.482Z,1528875801.482 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86
2018-06-13T07:43:21.482Z,1528875801.482 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:43:21.484Z,1528875801.484 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:21.484Z,1528875801.484 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 86
2018-06-13T07:43:21.484Z,1528875801.484 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:43:21.592Z,1528875801.592 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:43:21.593Z,1528875801.593 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:43:21.593Z,1528875801.593 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:43:21.761Z,1528875801.761 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:43:21.761Z,1528875801.761 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86
2018-06-13T07:43:21.762Z,1528875801.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:43:21.762Z,1528875801.762 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86
2018-06-13T07:43:21.762Z,1528875801.762 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:43:21.762Z,1528875801.762 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 86
2018-06-13T07:43:22.070Z,1528875802.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:43:22.070Z,1528875802.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:43:22.071Z,1528875802.071 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:43:22.071Z,1528875802.071 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:43:22.072Z,1528875802.072 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:43:22.072Z,1528875802.072 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:43:22.072Z,1528875802.072 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:43:22.077Z,1528875802.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:43:22.077Z,1528875802.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:43:22.472Z,1528875802.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T07:43:22.473Z,1528875802.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:22.871Z,1528875802.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T07:43:22.872Z,1528875802.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:23.248Z,1528875803.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T07:43:23.249Z,1528875803.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:23.644Z,1528875803.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T07:43:23.645Z,1528875803.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:24.052Z,1528875804.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T07:43:24.053Z,1528875804.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:24.451Z,1528875804.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T07:43:24.452Z,1528875804.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:24.855Z,1528875804.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T07:43:24.856Z,1528875804.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:25.256Z,1528875805.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T07:43:25.257Z,1528875805.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:25.647Z,1528875805.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T07:43:25.648Z,1528875805.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:26.061Z,1528875806.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T07:43:26.062Z,1528875806.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:26.442Z,1528875806.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T07:43:26.443Z,1528875806.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:26.847Z,1528875806.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T07:43:26.847Z,1528875806.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:27.255Z,1528875807.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T07:43:27.256Z,1528875807.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:27.660Z,1528875807.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T07:43:27.661Z,1528875807.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:28.058Z,1528875808.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T07:43:28.059Z,1528875808.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:28.461Z,1528875808.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T07:43:28.462Z,1528875808.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:28.846Z,1528875808.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T07:43:28.847Z,1528875808.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:29.252Z,1528875809.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T07:43:29.253Z,1528875809.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:29.648Z,1528875809.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T07:43:29.649Z,1528875809.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:30.044Z,1528875810.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T07:43:30.045Z,1528875810.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:30.456Z,1528875810.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T07:43:30.457Z,1528875810.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:30.861Z,1528875810.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T07:43:30.862Z,1528875810.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:31.268Z,1528875811.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T07:43:31.268Z,1528875811.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:31.648Z,1528875811.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T07:43:31.649Z,1528875811.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:32.054Z,1528875812.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T07:43:32.055Z,1528875812.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:32.444Z,1528875812.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T07:43:32.445Z,1528875812.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:32.848Z,1528875812.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T07:43:32.850Z,1528875812.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:33.250Z,1528875813.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-06-13T07:43:33.251Z,1528875813.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:33.655Z,1528875813.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T07:43:33.656Z,1528875813.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:34.062Z,1528875814.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T07:43:34.063Z,1528875814.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:34.468Z,1528875814.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T07:43:34.469Z,1528875814.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:34.854Z,1528875814.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T07:43:34.854Z,1528875814.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:35.248Z,1528875815.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T07:43:35.248Z,1528875815.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:35.652Z,1528875815.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T07:43:35.653Z,1528875815.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:36.048Z,1528875816.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T07:43:36.048Z,1528875816.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:36.456Z,1528875816.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T07:43:36.457Z,1528875816.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:36.858Z,1528875816.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T07:43:36.859Z,1528875816.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:37.258Z,1528875817.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T07:43:37.259Z,1528875817.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:37.660Z,1528875817.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T07:43:37.665Z,1528875817.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:38.053Z,1528875818.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T07:43:38.054Z,1528875818.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:38.436Z,1528875818.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T07:43:38.437Z,1528875818.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:38.862Z,1528875818.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T07:43:38.862Z,1528875818.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:39.267Z,1528875819.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T07:43:39.268Z,1528875819.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:39.666Z,1528875819.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T07:43:39.667Z,1528875819.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:40.063Z,1528875820.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T07:43:40.063Z,1528875820.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:40.465Z,1528875820.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T07:43:40.466Z,1528875820.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:40.840Z,1528875820.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T07:43:40.842Z,1528875820.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:41.244Z,1528875821.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T07:43:41.261Z,1528875821.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:41.642Z,1528875821.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:42.041Z,1528875822.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:42.470Z,1528875822.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:42.876Z,1528875822.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:43.270Z,1528875823.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:43.645Z,1528875823.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:44.045Z,1528875824.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:44.440Z,1528875824.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:44.848Z,1528875824.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:45.248Z,1528875825.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:45.652Z,1528875825.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:46.075Z,1528875826.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:46.558Z,1528875826.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:46.947Z,1528875826.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:47.241Z,1528875827.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:47.777Z,1528875827.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:48.084Z,1528875828.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:48.468Z,1528875828.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:48.870Z,1528875828.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:49.260Z,1528875829.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:49.659Z,1528875829.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:50.058Z,1528875830.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:50.453Z,1528875830.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:50.853Z,1528875830.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:51.257Z,1528875831.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:51.659Z,1528875831.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:52.063Z,1528875832.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:52.462Z,1528875832.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:52.863Z,1528875832.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:53.261Z,1528875833.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:53.661Z,1528875833.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:54.064Z,1528875834.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:54.470Z,1528875834.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:54.866Z,1528875834.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:55.267Z,1528875835.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:55.640Z,1528875835.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:56.053Z,1528875836.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:56.451Z,1528875836.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:56.847Z,1528875836.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:57.248Z,1528875837.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:57.653Z,1528875837.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:58.060Z,1528875838.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:58.464Z,1528875838.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:58.846Z,1528875838.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:59.248Z,1528875839.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:43:59.647Z,1528875839.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:00.052Z,1528875840.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:00.456Z,1528875840.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:00.864Z,1528875840.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:01.254Z,1528875841.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:01.648Z,1528875841.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:02.047Z,1528875842.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:02.446Z,1528875842.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:02.852Z,1528875842.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:03.247Z,1528875843.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:03.653Z,1528875843.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:04.060Z,1528875844.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:04.464Z,1528875844.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:04.845Z,1528875844.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:05.246Z,1528875845.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:05.647Z,1528875845.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:06.044Z,1528875846.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:06.457Z,1528875846.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:06.864Z,1528875846.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:07.257Z,1528875847.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:07.648Z,1528875847.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:08.051Z,1528875848.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:08.448Z,1528875848.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:08.850Z,1528875848.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:09.252Z,1528875849.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:09.661Z,1528875849.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:10.060Z,1528875850.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:10.468Z,1528875850.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:10.848Z,1528875850.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:11.252Z,1528875851.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:11.651Z,1528875851.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:12.056Z,1528875852.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:12.457Z,1528875852.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:12.868Z,1528875852.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:13.261Z,1528875853.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:13.656Z,1528875853.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:14.050Z,1528875854.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:14.456Z,1528875854.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:14.849Z,1528875854.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:15.256Z,1528875855.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:15.662Z,1528875855.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:16.057Z,1528875856.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:16.468Z,1528875856.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:16.855Z,1528875856.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:17.248Z,1528875857.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:17.646Z,1528875857.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:18.050Z,1528875858.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:18.462Z,1528875858.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:21.600Z,1528875861.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:21.780Z,1528875861.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:22.150Z,1528875862.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:22.550Z,1528875862.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:22.949Z,1528875862.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:23.352Z,1528875863.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:23.767Z,1528875863.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:24.159Z,1528875864.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:24.554Z,1528875864.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:24.962Z,1528875864.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:25.353Z,1528875865.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:25.737Z,1528875865.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:26.141Z,1528875866.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:26.568Z,1528875866.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:26.963Z,1528875866.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:27.369Z,1528875867.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:27.740Z,1528875867.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:28.139Z,1528875868.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:28.540Z,1528875868.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:28.944Z,1528875868.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:29.340Z,1528875869.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:29.747Z,1528875869.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:30.171Z,1528875870.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:30.568Z,1528875870.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:30.940Z,1528875870.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:31.348Z,1528875871.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:31.744Z,1528875871.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:32.144Z,1528875872.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:32.573Z,1528875872.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:32.951Z,1528875872.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:33.373Z,1528875873.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:33.739Z,1528875873.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:34.144Z,1528875874.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:34.541Z,1528875874.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:34.941Z,1528875874.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:35.345Z,1528875875.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:35.775Z,1528875875.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:36.172Z,1528875876.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:36.551Z,1528875876.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:36.945Z,1528875876.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:37.346Z,1528875877.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:37.750Z,1528875877.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:38.149Z,1528875878.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:38.560Z,1528875878.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:38.958Z,1528875878.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:39.364Z,1528875879.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:39.752Z,1528875879.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:40.152Z,1528875880.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:40.549Z,1528875880.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:40.949Z,1528875880.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:41.353Z,1528875881.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:41.759Z,1528875881.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:42.158Z,1528875882.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:42.553Z,1528875882.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:42.948Z,1528875882.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:43.340Z,1528875883.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:43.745Z,1528875883.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:44.159Z,1528875884.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:44.554Z,1528875884.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:44.958Z,1528875884.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:45.358Z,1528875885.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:45.752Z,1528875885.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:46.148Z,1528875886.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:46.548Z,1528875886.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:46.946Z,1528875886.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:47.348Z,1528875887.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:47.762Z,1528875887.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:48.157Z,1528875888.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:48.553Z,1528875888.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:48.958Z,1528875888.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:49.346Z,1528875889.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:49.752Z,1528875889.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:50.147Z,1528875890.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:50.553Z,1528875890.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:50.951Z,1528875890.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:51.364Z,1528875891.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:51.751Z,1528875891.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:52.144Z,1528875892.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:52.552Z,1528875892.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:52.950Z,1528875892.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:53.344Z,1528875893.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:53.759Z,1528875893.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:54.151Z,1528875894.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:54.552Z,1528875894.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:54.958Z,1528875894.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:55.332Z,1528875895.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:55.753Z,1528875895.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:56.137Z,1528875896.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:56.564Z,1528875896.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:56.971Z,1528875896.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:57.351Z,1528875897.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:57.741Z,1528875897.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:58.141Z,1528875898.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:58.548Z,1528875898.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:58.939Z,1528875898.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:59.342Z,1528875899.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:44:59.751Z,1528875899.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:00.151Z,1528875900.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:00.548Z,1528875900.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:00.943Z,1528875900.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:01.340Z,1528875901.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:01.741Z,1528875901.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:02.143Z,1528875902.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:02.548Z,1528875902.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:02.951Z,1528875902.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:03.352Z,1528875903.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:03.743Z,1528875903.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:04.144Z,1528875904.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:04.543Z,1528875904.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:04.941Z,1528875904.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:05.340Z,1528875905.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:05.751Z,1528875905.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:06.152Z,1528875906.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:06.552Z,1528875906.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:06.944Z,1528875906.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:07.340Z,1528875907.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:07.744Z,1528875907.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:08.150Z,1528875908.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:08.549Z,1528875908.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:08.957Z,1528875908.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:09.358Z,1528875909.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:09.752Z,1528875909.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:10.140Z,1528875910.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:10.558Z,1528875910.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:10.946Z,1528875910.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:11.344Z,1528875911.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:11.758Z,1528875911.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:12.157Z,1528875912.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:12.553Z,1528875912.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:12.949Z,1528875912.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:13.351Z,1528875913.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:13.750Z,1528875913.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:14.161Z,1528875914.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:14.552Z,1528875914.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:14.958Z,1528875914.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:15.359Z,1528875915.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:15.748Z,1528875915.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:16.150Z,1528875916.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:16.556Z,1528875916.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:16.942Z,1528875916.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:17.348Z,1528875917.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:17.769Z,1528875917.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:18.168Z,1528875918.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:18.567Z,1528875918.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:21.665Z,1528875921.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:21.825Z,1528875921.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:22.215Z,1528875922.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:22.615Z,1528875922.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:23.008Z,1528875923.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:23.402Z,1528875923.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:23.808Z,1528875923.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:24.189Z,1528875924.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:24.617Z,1528875924.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:25.019Z,1528875925.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:25.416Z,1528875925.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:25.794Z,1528875925.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:26.192Z,1528875926.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:26.588Z,1528875926.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:26.996Z,1528875926.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:27.392Z,1528875927.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:27.795Z,1528875927.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:28.230Z,1528875928.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:28.625Z,1528875928.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:28.994Z,1528875928.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:29.394Z,1528875929.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:29.806Z,1528875929.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:30.192Z,1528875930.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:30.607Z,1528875930.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:31.008Z,1528875931.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:31.405Z,1528875931.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:31.796Z,1528875931.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:32.205Z,1528875932.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:32.591Z,1528875932.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:32.994Z,1528875932.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:33.402Z,1528875933.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:33.803Z,1528875933.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:34.216Z,1528875934.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:34.610Z,1528875934.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:34.992Z,1528875934.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:35.395Z,1528875935.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:35.803Z,1528875935.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:36.201Z,1528875936.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:36.605Z,1528875936.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:37.010Z,1528875937.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:37.403Z,1528875937.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:37.796Z,1528875937.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:38.202Z,1528875938.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:38.595Z,1528875938.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:38.992Z,1528875938.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:39.396Z,1528875939.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:39.802Z,1528875939.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:40.216Z,1528875940.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:40.606Z,1528875940.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:40.992Z,1528875940.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:41.395Z,1528875941.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:41.798Z,1528875941.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:42.192Z,1528875942.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:42.605Z,1528875942.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:43.010Z,1528875943.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:43.401Z,1528875943.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:43.794Z,1528875943.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:44.200Z,1528875944.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:44.600Z,1528875944.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:44.996Z,1528875944.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:45.405Z,1528875945.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:45.802Z,1528875945.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:46.208Z,1528875946.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:46.610Z,1528875946.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:46.992Z,1528875946.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:47.396Z,1528875947.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:47.800Z,1528875947.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:48.196Z,1528875948.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:48.605Z,1528875948.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:49.031Z,1528875949.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:49.401Z,1528875949.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:49.798Z,1528875949.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:50.201Z,1528875950.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:50.592Z,1528875950.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:50.996Z,1528875950.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:51.400Z,1528875951.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:51.802Z,1528875951.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:52.209Z,1528875952.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:52.614Z,1528875952.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:52.996Z,1528875952.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:53.396Z,1528875953.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:53.801Z,1528875953.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:54.192Z,1528875954.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:54.607Z,1528875954.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:55.010Z,1528875955.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:55.402Z,1528875955.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:55.813Z,1528875955.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:56.206Z,1528875956.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:56.603Z,1528875956.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:57.003Z,1528875957.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:57.405Z,1528875957.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:57.814Z,1528875957.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:58.209Z,1528875958.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:58.612Z,1528875958.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:59.006Z,1528875959.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:59.410Z,1528875959.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:45:59.795Z,1528875959.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:00.206Z,1528875960.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:00.616Z,1528875960.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:01.023Z,1528875961.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:01.420Z,1528875961.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:01.813Z,1528875961.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:02.194Z,1528875962.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:02.588Z,1528875962.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:02.992Z,1528875962.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:03.391Z,1528875963.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:03.800Z,1528875963.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:04.220Z,1528875964.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:04.599Z,1528875964.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:04.990Z,1528875964.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:05.391Z,1528875965.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:05.795Z,1528875965.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:06.192Z,1528875966.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:06.600Z,1528875966.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:06.999Z,1528875966.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:07.390Z,1528875967.390 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T07:46:07.391Z,1528875967.391 [BPC1] Communications Fault, FailCount= 5
2018-06-13T07:46:07.391Z,1528875967.391 [BPC1](ERROR): Communications Fault
2018-06-13T07:46:07.401Z,1528875967.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:07.497Z,1528875967.497 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T07:46:07.794Z,1528875967.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:08.195Z,1528875968.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:08.592Z,1528875968.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:08.670Z,1528875968.670 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T07:46:08.670Z,1528875968.670 [BPC1] No Fault, FailCount= 5
2018-06-13T07:46:09.048Z,1528875969.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:09.393Z,1528875969.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:09.801Z,1528875969.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:10.203Z,1528875970.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:10.603Z,1528875970.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:11.002Z,1528875971.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:11.400Z,1528875971.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:11.792Z,1528875971.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:12.192Z,1528875972.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:12.600Z,1528875972.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:13.003Z,1528875973.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:13.399Z,1528875973.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:13.796Z,1528875973.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:14.195Z,1528875974.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:14.594Z,1528875974.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:14.995Z,1528875974.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:15.395Z,1528875975.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:15.801Z,1528875975.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:16.204Z,1528875976.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:16.604Z,1528875976.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:16.995Z,1528875976.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:17.395Z,1528875977.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:17.796Z,1528875977.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:18.198Z,1528875978.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:18.607Z,1528875978.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:21.735Z,1528875981.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:21.901Z,1528875981.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:22.272Z,1528875982.272 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:22.272Z,1528875982.272 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87
2018-06-13T07:46:22.272Z,1528875982.272 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:46:22.274Z,1528875982.274 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:22.274Z,1528875982.274 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87
2018-06-13T07:46:22.274Z,1528875982.274 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:46:22.276Z,1528875982.276 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:22.276Z,1528875982.276 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 87
2018-06-13T07:46:22.276Z,1528875982.276 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:46:22.357Z,1528875982.357 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:46:22.357Z,1528875982.357 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:46:22.358Z,1528875982.358 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:46:22.775Z,1528875982.775 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:46:22.775Z,1528875982.775 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87
2018-06-13T07:46:22.775Z,1528875982.775 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:46:22.775Z,1528875982.775 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87
2018-06-13T07:46:22.776Z,1528875982.776 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:46:22.776Z,1528875982.776 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 87
2018-06-13T07:46:23.068Z,1528875983.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:46:23.068Z,1528875983.068 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:46:23.073Z,1528875983.073 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:46:23.073Z,1528875983.073 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:46:23.074Z,1528875983.074 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:46:23.074Z,1528875983.074 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:46:23.074Z,1528875983.074 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:46:23.075Z,1528875983.075 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:46:23.075Z,1528875983.075 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:46:23.461Z,1528875983.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:46:23.462Z,1528875983.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:23.871Z,1528875983.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:46:23.872Z,1528875983.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:24.276Z,1528875984.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:46:24.293Z,1528875984.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:24.667Z,1528875984.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:46:24.667Z,1528875984.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:25.062Z,1528875985.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:46:25.062Z,1528875985.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:25.461Z,1528875985.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:46:25.462Z,1528875985.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:25.863Z,1528875985.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:46:25.864Z,1528875985.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:26.262Z,1528875986.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:46:26.263Z,1528875986.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:26.667Z,1528875986.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:46:26.668Z,1528875986.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:27.076Z,1528875987.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:46:27.093Z,1528875987.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:27.475Z,1528875987.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:46:27.476Z,1528875987.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:27.862Z,1528875987.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:46:27.863Z,1528875987.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:28.263Z,1528875988.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:46:28.264Z,1528875988.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:28.664Z,1528875988.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:46:28.664Z,1528875988.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:29.063Z,1528875989.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:46:29.064Z,1528875989.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:29.463Z,1528875989.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:46:29.464Z,1528875989.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:29.875Z,1528875989.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:46:29.876Z,1528875989.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:30.276Z,1528875990.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:46:30.293Z,1528875990.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:30.668Z,1528875990.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:46:30.669Z,1528875990.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:31.063Z,1528875991.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:46:31.064Z,1528875991.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:31.464Z,1528875991.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:46:31.465Z,1528875991.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:31.864Z,1528875991.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:46:31.865Z,1528875991.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:32.265Z,1528875992.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:46:32.266Z,1528875992.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:32.676Z,1528875992.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:46:32.697Z,1528875992.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:33.076Z,1528875993.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:46:33.093Z,1528875993.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:33.475Z,1528875993.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:46:33.476Z,1528875993.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:33.862Z,1528875993.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:46:33.863Z,1528875993.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:34.263Z,1528875994.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:46:34.264Z,1528875994.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:34.659Z,1528875994.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:46:34.660Z,1528875994.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:35.063Z,1528875995.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:46:35.064Z,1528875995.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:35.463Z,1528875995.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:46:35.464Z,1528875995.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:35.875Z,1528875995.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:46:35.876Z,1528875995.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:36.276Z,1528875996.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:46:36.293Z,1528875996.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:36.672Z,1528875996.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:46:36.673Z,1528875996.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:37.065Z,1528875997.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:46:37.066Z,1528875997.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:37.464Z,1528875997.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:46:37.465Z,1528875997.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:37.864Z,1528875997.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:46:37.865Z,1528875997.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:38.265Z,1528875998.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:46:38.266Z,1528875998.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:38.672Z,1528875998.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:46:38.673Z,1528875998.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:39.076Z,1528875999.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:46:39.093Z,1528875999.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:39.472Z,1528875999.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:46:39.473Z,1528875999.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:39.864Z,1528875999.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:46:39.865Z,1528875999.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:40.264Z,1528876000.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:46:40.265Z,1528876000.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:40.664Z,1528876000.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:46:40.665Z,1528876000.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:41.063Z,1528876001.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:46:41.064Z,1528876001.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:41.462Z,1528876001.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:46:41.463Z,1528876001.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:41.875Z,1528876001.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:46:41.876Z,1528876001.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:42.276Z,1528876002.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:42.672Z,1528876002.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:43.072Z,1528876003.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:43.462Z,1528876003.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:43.874Z,1528876003.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:44.269Z,1528876004.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:44.674Z,1528876004.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:45.075Z,1528876005.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:45.480Z,1528876005.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:45.863Z,1528876005.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:46.266Z,1528876006.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:46.665Z,1528876006.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:47.067Z,1528876007.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:47.466Z,1528876007.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:47.875Z,1528876007.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:48.276Z,1528876008.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:48.697Z,1528876008.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:49.066Z,1528876009.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:49.469Z,1528876009.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:49.866Z,1528876009.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:50.268Z,1528876010.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:50.680Z,1528876010.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:51.073Z,1528876011.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:51.480Z,1528876011.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:51.862Z,1528876011.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:52.264Z,1528876012.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:52.664Z,1528876012.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:53.064Z,1528876013.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:53.464Z,1528876013.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:53.874Z,1528876013.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:54.276Z,1528876014.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:54.673Z,1528876014.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:55.064Z,1528876015.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:55.461Z,1528876015.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:55.866Z,1528876015.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:56.267Z,1528876016.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:56.676Z,1528876016.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:57.076Z,1528876017.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:57.480Z,1528876017.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:57.864Z,1528876017.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:58.272Z,1528876018.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:58.669Z,1528876018.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:59.061Z,1528876019.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:59.462Z,1528876019.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:46:59.884Z,1528876019.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:00.277Z,1528876020.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:00.674Z,1528876020.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:01.073Z,1528876021.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:01.468Z,1528876021.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:01.873Z,1528876021.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:02.280Z,1528876022.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:02.675Z,1528876022.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:03.075Z,1528876023.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:03.482Z,1528876023.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:03.856Z,1528876023.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:04.276Z,1528876024.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:04.652Z,1528876024.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:05.053Z,1528876025.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:05.456Z,1528876025.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:05.823Z,1528876025.823 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T07:47:05.823Z,1528876025.823 [NAL9602] Data Fault, FailCount= 4
2018-06-13T07:47:05.823Z,1528876025.823 [NAL9602](ERROR): Data Fault
2018-06-13T07:47:05.857Z,1528876025.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:05.957Z,1528876025.957 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T07:47:06.222Z,1528876026.222 [NAL9602](INFO): Powering down
2018-06-13T07:47:06.257Z,1528876026.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:06.659Z,1528876026.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:07.058Z,1528876027.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:07.165Z,1528876027.165 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T07:47:07.165Z,1528876027.165 [NAL9602] No Fault, FailCount= 4
2018-06-13T07:47:07.455Z,1528876027.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:07.859Z,1528876027.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:08.259Z,1528876028.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:08.655Z,1528876028.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:09.060Z,1528876029.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:09.486Z,1528876029.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:09.859Z,1528876029.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:10.260Z,1528876030.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:10.659Z,1528876030.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:11.056Z,1528876031.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:11.459Z,1528876031.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:11.859Z,1528876031.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:12.260Z,1528876032.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:12.659Z,1528876032.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:13.059Z,1528876033.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:13.459Z,1528876033.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:13.860Z,1528876033.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:14.259Z,1528876034.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:14.660Z,1528876034.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:15.074Z,1528876035.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:15.489Z,1528876035.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:15.855Z,1528876035.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:16.263Z,1528876036.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:16.659Z,1528876036.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:17.060Z,1528876037.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:17.459Z,1528876037.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:17.859Z,1528876037.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:18.264Z,1528876038.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:18.665Z,1528876038.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:21.792Z,1528876041.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:21.944Z,1528876041.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:22.347Z,1528876042.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:22.755Z,1528876042.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:23.124Z,1528876043.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:23.523Z,1528876043.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:23.924Z,1528876043.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:24.324Z,1528876044.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:24.724Z,1528876044.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:25.154Z,1528876045.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:25.524Z,1528876045.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:25.928Z,1528876045.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:26.323Z,1528876046.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:26.730Z,1528876046.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:27.156Z,1528876047.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:27.523Z,1528876047.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:27.923Z,1528876047.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:28.328Z,1528876048.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:28.732Z,1528876048.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:29.125Z,1528876049.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:29.528Z,1528876049.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:29.925Z,1528876049.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:30.324Z,1528876050.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:30.724Z,1528876050.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:31.124Z,1528876051.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:31.525Z,1528876051.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:31.929Z,1528876051.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:32.324Z,1528876052.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:32.725Z,1528876052.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:33.124Z,1528876053.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:33.524Z,1528876053.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:33.924Z,1528876053.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:34.324Z,1528876054.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:34.724Z,1528876054.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:35.133Z,1528876055.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:35.555Z,1528876055.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:35.926Z,1528876055.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:36.286Z,1528876056.286 [NAL9602](INFO): Powering up NAL9602
2018-06-13T07:47:36.331Z,1528876056.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:36.727Z,1528876056.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:37.146Z,1528876057.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:37.533Z,1528876057.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:37.936Z,1528876057.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:38.359Z,1528876058.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:38.755Z,1528876058.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:39.120Z,1528876059.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:39.550Z,1528876059.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:39.920Z,1528876059.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:40.324Z,1528876060.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:40.724Z,1528876060.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:41.119Z,1528876061.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:41.524Z,1528876061.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:41.923Z,1528876061.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:42.319Z,1528876062.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:42.723Z,1528876062.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:43.123Z,1528876063.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:43.523Z,1528876063.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:43.923Z,1528876063.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:44.324Z,1528876064.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:44.723Z,1528876064.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:45.123Z,1528876065.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:45.523Z,1528876065.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:45.923Z,1528876065.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:46.324Z,1528876066.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:46.750Z,1528876066.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:47.090Z,1528876067.090 [NAL9602](INFO): NAL9602 initialized
2018-06-13T07:47:47.124Z,1528876067.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:47.524Z,1528876067.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:47.958Z,1528876067.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:48.356Z,1528876068.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:48.753Z,1528876068.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:49.125Z,1528876069.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:49.520Z,1528876069.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:49.930Z,1528876069.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:50.367Z,1528876070.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:50.731Z,1528876070.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:51.135Z,1528876071.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:51.527Z,1528876071.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:51.922Z,1528876071.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:52.328Z,1528876072.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:52.732Z,1528876072.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:53.128Z,1528876073.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:53.535Z,1528876073.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:53.935Z,1528876073.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:54.322Z,1528876074.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:54.727Z,1528876074.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:55.132Z,1528876075.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:55.523Z,1528876075.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:55.934Z,1528876075.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:56.340Z,1528876076.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:56.736Z,1528876076.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:57.144Z,1528876077.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:57.527Z,1528876077.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:57.928Z,1528876077.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:58.328Z,1528876078.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:58.727Z,1528876078.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:59.135Z,1528876079.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:59.540Z,1528876079.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:47:59.937Z,1528876079.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:00.326Z,1528876080.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:00.729Z,1528876080.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:01.137Z,1528876081.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:01.548Z,1528876081.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:01.948Z,1528876081.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:02.348Z,1528876082.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:02.737Z,1528876082.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:03.141Z,1528876083.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:03.532Z,1528876083.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:03.928Z,1528876083.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:04.330Z,1528876084.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:04.731Z,1528876084.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:05.137Z,1528876085.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:05.543Z,1528876085.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:05.942Z,1528876085.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:06.329Z,1528876086.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:06.733Z,1528876086.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:07.136Z,1528876087.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:07.531Z,1528876087.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:07.956Z,1528876087.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:08.356Z,1528876088.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:08.745Z,1528876088.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:09.144Z,1528876089.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:09.532Z,1528876089.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:09.938Z,1528876089.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:10.340Z,1528876090.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:10.736Z,1528876090.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:11.138Z,1528876091.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:11.549Z,1528876091.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:11.938Z,1528876091.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:12.332Z,1528876092.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:12.731Z,1528876092.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:13.136Z,1528876093.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:13.530Z,1528876093.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:13.937Z,1528876093.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:14.356Z,1528876094.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:14.741Z,1528876094.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:15.143Z,1528876095.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:15.532Z,1528876095.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:15.937Z,1528876095.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:16.338Z,1528876096.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:16.721Z,1528876096.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:17.151Z,1528876097.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:17.548Z,1528876097.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:17.953Z,1528876097.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:18.324Z,1528876098.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:18.327Z,1528876098.327 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T07:48:18.327Z,1528876098.327 [Default:CheckIn:C.Wait] Stopped
2018-06-13T07:48:18.327Z,1528876098.327 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T07:48:18.327Z,1528876098.327 [Default:CheckIn:D] Running Loop=1
2018-06-13T07:48:18.730Z,1528876098.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:18.741Z,1528876098.741 [Default:CheckIn:D] Stopped
2018-06-13T07:48:18.741Z,1528876098.741 [Default:CheckIn:E] Running Loop=1
2018-06-13T07:48:19.125Z,1528876099.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:19.128Z,1528876099.128 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 261.088118 min 
2018-06-13T07:48:19.128Z,1528876099.128 [Default:CheckIn:E] Stopped
2018-06-13T07:48:19.129Z,1528876099.129 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T07:48:19.129Z,1528876099.129 [Default:CheckIn] Stopped
2018-06-13T07:48:19.129Z,1528876099.129 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T07:48:19.129Z,1528876099.129 [Default:CheckIn](INFO): Running loop #26
2018-06-13T07:48:19.129Z,1528876099.129 [Default:CheckIn] Running Loop=26
2018-06-13T07:48:19.129Z,1528876099.129 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T07:48:19.129Z,1528876099.129 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T07:48:19.528Z,1528876099.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:19.932Z,1528876099.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:23.076Z,1528876103.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:23.276Z,1528876103.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:23.658Z,1528876103.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:24.029Z,1528876104.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:24.430Z,1528876104.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:24.828Z,1528876104.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:25.236Z,1528876105.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:25.639Z,1528876105.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:26.039Z,1528876106.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:26.438Z,1528876106.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:26.848Z,1528876106.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:27.240Z,1528876107.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:27.630Z,1528876107.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:28.036Z,1528876108.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:28.439Z,1528876108.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:28.840Z,1528876108.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:29.232Z,1528876109.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:29.632Z,1528876109.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:30.044Z,1528876110.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:30.439Z,1528876110.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:30.839Z,1528876110.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:31.245Z,1528876111.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:31.627Z,1528876111.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:32.044Z,1528876112.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:32.439Z,1528876112.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:32.835Z,1528876112.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:33.236Z,1528876113.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:33.630Z,1528876113.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:34.036Z,1528876114.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:34.439Z,1528876114.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:34.836Z,1528876114.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:35.231Z,1528876115.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:35.639Z,1528876115.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:36.071Z,1528876116.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:36.448Z,1528876116.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:36.852Z,1528876116.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:37.232Z,1528876117.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:37.636Z,1528876117.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:38.045Z,1528876118.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:38.444Z,1528876118.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:38.841Z,1528876118.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:39.239Z,1528876119.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:39.648Z,1528876119.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:40.040Z,1528876120.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:40.445Z,1528876120.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:40.851Z,1528876120.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:41.231Z,1528876121.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:41.634Z,1528876121.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:42.048Z,1528876122.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:42.443Z,1528876122.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:42.844Z,1528876122.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:43.232Z,1528876123.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:43.633Z,1528876123.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:44.048Z,1528876124.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:44.441Z,1528876124.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:44.840Z,1528876124.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:45.240Z,1528876125.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:45.636Z,1528876125.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:46.040Z,1528876126.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:46.445Z,1528876126.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:46.841Z,1528876126.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:47.231Z,1528876127.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:47.634Z,1528876127.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:48.042Z,1528876128.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:48.449Z,1528876128.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:48.880Z,1528876128.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:49.235Z,1528876129.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:49.633Z,1528876129.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:50.037Z,1528876130.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:50.442Z,1528876130.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:50.844Z,1528876130.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:51.252Z,1528876131.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:51.637Z,1528876131.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:52.038Z,1528876132.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:52.440Z,1528876132.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:52.839Z,1528876132.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:53.241Z,1528876133.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:53.652Z,1528876133.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:54.037Z,1528876134.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:54.433Z,1528876134.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:54.841Z,1528876134.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:55.240Z,1528876135.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:55.637Z,1528876135.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:56.037Z,1528876136.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:56.448Z,1528876136.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:56.845Z,1528876136.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:57.247Z,1528876137.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:57.644Z,1528876137.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:58.038Z,1528876138.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:58.437Z,1528876138.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:58.848Z,1528876138.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:59.242Z,1528876139.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:48:59.655Z,1528876139.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:00.043Z,1528876140.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:00.440Z,1528876140.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:00.840Z,1528876140.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:01.243Z,1528876141.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:01.645Z,1528876141.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:02.043Z,1528876142.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:02.442Z,1528876142.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:02.841Z,1528876142.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:03.256Z,1528876143.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:03.643Z,1528876143.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:04.038Z,1528876144.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:04.447Z,1528876144.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:04.852Z,1528876144.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:05.239Z,1528876145.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:05.644Z,1528876145.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:06.047Z,1528876146.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:06.424Z,1528876146.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:06.852Z,1528876146.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:07.229Z,1528876147.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:07.624Z,1528876147.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:08.028Z,1528876148.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:08.455Z,1528876148.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:08.835Z,1528876148.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:09.239Z,1528876149.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:09.628Z,1528876149.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:10.028Z,1528876150.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:10.432Z,1528876150.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:10.829Z,1528876150.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:11.231Z,1528876151.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:11.639Z,1528876151.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:12.039Z,1528876152.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:12.436Z,1528876152.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:12.831Z,1528876152.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:13.231Z,1528876153.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:13.631Z,1528876153.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:14.031Z,1528876154.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:14.442Z,1528876154.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:14.867Z,1528876154.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:15.244Z,1528876155.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:15.636Z,1528876155.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:16.026Z,1528876156.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:16.433Z,1528876156.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:16.834Z,1528876156.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:17.246Z,1528876157.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:17.670Z,1528876157.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:18.040Z,1528876158.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:18.431Z,1528876158.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:18.836Z,1528876158.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:21.946Z,1528876161.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:22.120Z,1528876162.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:22.519Z,1528876162.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:22.903Z,1528876162.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:23.292Z,1528876163.292 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:23.292Z,1528876163.292 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88
2018-06-13T07:49:23.292Z,1528876163.292 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:49:23.294Z,1528876163.294 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:23.294Z,1528876163.294 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88
2018-06-13T07:49:23.294Z,1528876163.294 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:49:23.295Z,1528876163.295 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:23.296Z,1528876163.296 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 88
2018-06-13T07:49:23.296Z,1528876163.296 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:49:23.369Z,1528876163.369 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:49:23.369Z,1528876163.369 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:49:23.370Z,1528876163.370 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:49:23.777Z,1528876163.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:49:23.777Z,1528876163.777 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88
2018-06-13T07:49:23.778Z,1528876163.778 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:49:23.778Z,1528876163.778 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88
2018-06-13T07:49:23.778Z,1528876163.778 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:49:23.778Z,1528876163.778 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 88
2018-06-13T07:49:24.098Z,1528876164.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:49:24.099Z,1528876164.099 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:49:24.099Z,1528876164.099 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:49:24.099Z,1528876164.099 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:49:24.100Z,1528876164.100 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:49:24.100Z,1528876164.100 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:49:24.100Z,1528876164.100 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:49:24.101Z,1528876164.101 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:49:24.101Z,1528876164.101 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:49:24.496Z,1528876164.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:49:24.497Z,1528876164.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:24.896Z,1528876164.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:49:24.897Z,1528876164.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:25.304Z,1528876165.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:49:25.306Z,1528876165.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:25.701Z,1528876165.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:49:25.702Z,1528876165.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:26.108Z,1528876166.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:49:26.109Z,1528876166.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:26.501Z,1528876166.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:49:26.502Z,1528876166.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:26.892Z,1528876166.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:49:26.893Z,1528876166.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:27.304Z,1528876167.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:49:27.304Z,1528876167.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:27.700Z,1528876167.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:49:27.702Z,1528876167.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:28.119Z,1528876168.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:49:28.120Z,1528876168.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:28.506Z,1528876168.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:49:28.507Z,1528876168.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:28.901Z,1528876168.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:49:28.902Z,1528876168.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:29.291Z,1528876169.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:49:29.292Z,1528876169.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:29.712Z,1528876169.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:49:29.717Z,1528876169.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:30.108Z,1528876170.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:49:30.125Z,1528876170.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:30.496Z,1528876170.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:49:30.498Z,1528876170.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:30.903Z,1528876170.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:49:30.904Z,1528876170.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:31.299Z,1528876171.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:49:31.300Z,1528876171.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:31.685Z,1528876171.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:49:31.686Z,1528876171.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:32.091Z,1528876172.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:49:32.092Z,1528876172.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:32.494Z,1528876172.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:49:32.495Z,1528876172.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:32.886Z,1528876172.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:49:32.887Z,1528876172.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:33.301Z,1528876173.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:49:33.302Z,1528876173.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:33.704Z,1528876173.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:49:33.705Z,1528876173.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:34.096Z,1528876174.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:49:34.098Z,1528876174.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:34.491Z,1528876174.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:49:34.492Z,1528876174.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:34.893Z,1528876174.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:49:34.894Z,1528876174.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:35.286Z,1528876175.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:49:35.287Z,1528876175.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:35.696Z,1528876175.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:49:35.697Z,1528876175.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:36.091Z,1528876176.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:49:36.092Z,1528876176.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:36.496Z,1528876176.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:49:36.497Z,1528876176.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:36.904Z,1528876176.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:49:36.905Z,1528876176.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:37.300Z,1528876177.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:49:37.301Z,1528876177.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:37.687Z,1528876177.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:49:37.688Z,1528876177.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:38.099Z,1528876178.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:49:38.100Z,1528876178.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:38.495Z,1528876178.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:49:38.496Z,1528876178.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:38.896Z,1528876178.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:49:38.897Z,1528876178.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:39.300Z,1528876179.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:49:39.301Z,1528876179.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:39.699Z,1528876179.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:49:39.700Z,1528876179.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:40.102Z,1528876180.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:49:40.103Z,1528876180.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:40.500Z,1528876180.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:49:40.501Z,1528876180.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:40.896Z,1528876180.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:49:40.897Z,1528876180.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:41.291Z,1528876181.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:49:41.292Z,1528876181.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:41.692Z,1528876181.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:49:41.693Z,1528876181.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:42.095Z,1528876182.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:49:42.096Z,1528876182.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:42.505Z,1528876182.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:49:42.506Z,1528876182.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:42.929Z,1528876182.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:49:42.930Z,1528876182.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:43.308Z,1528876183.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:43.687Z,1528876183.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:44.092Z,1528876184.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:44.495Z,1528876184.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:44.888Z,1528876184.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:45.301Z,1528876185.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:45.704Z,1528876185.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:46.100Z,1528876186.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:46.496Z,1528876186.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:46.894Z,1528876186.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:47.287Z,1528876187.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:47.696Z,1528876187.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:48.104Z,1528876188.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:48.497Z,1528876188.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:48.905Z,1528876188.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:49.308Z,1528876189.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:49.692Z,1528876189.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:50.100Z,1528876190.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:50.499Z,1528876190.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:50.888Z,1528876190.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:51.307Z,1528876191.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:51.705Z,1528876191.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:52.097Z,1528876192.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:52.502Z,1528876192.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:52.903Z,1528876192.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:53.303Z,1528876193.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:53.698Z,1528876193.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:54.099Z,1528876194.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:54.502Z,1528876194.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:54.907Z,1528876194.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:55.313Z,1528876195.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:55.707Z,1528876195.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:56.102Z,1528876196.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:56.508Z,1528876196.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:56.896Z,1528876196.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:57.306Z,1528876197.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:57.706Z,1528876197.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:58.106Z,1528876198.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:58.500Z,1528876198.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:58.901Z,1528876198.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:59.285Z,1528876199.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:49:59.685Z,1528876199.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:00.102Z,1528876200.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:00.507Z,1528876200.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:00.898Z,1528876200.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:01.300Z,1528876201.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:01.689Z,1528876201.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:02.091Z,1528876202.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:02.490Z,1528876202.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:02.886Z,1528876202.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:03.299Z,1528876203.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:03.699Z,1528876203.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:04.096Z,1528876204.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:04.491Z,1528876204.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:04.896Z,1528876204.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:05.288Z,1528876205.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:05.695Z,1528876205.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:06.092Z,1528876206.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:06.500Z,1528876206.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:06.900Z,1528876206.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:07.304Z,1528876207.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:07.690Z,1528876207.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:08.091Z,1528876208.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:08.498Z,1528876208.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:08.904Z,1528876208.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:09.304Z,1528876209.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:09.704Z,1528876209.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:10.097Z,1528876210.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:10.491Z,1528876210.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:10.892Z,1528876210.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:11.286Z,1528876211.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:11.693Z,1528876211.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:12.091Z,1528876212.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:12.497Z,1528876212.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:12.901Z,1528876212.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:13.304Z,1528876213.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:13.687Z,1528876213.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:14.091Z,1528876214.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:14.491Z,1528876214.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:14.887Z,1528876214.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:15.304Z,1528876215.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:15.700Z,1528876215.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:16.097Z,1528876216.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:16.495Z,1528876216.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:16.891Z,1528876216.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:17.291Z,1528876217.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:17.696Z,1528876217.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:18.091Z,1528876218.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:18.500Z,1528876218.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:18.903Z,1528876218.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:22.039Z,1528876222.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:22.197Z,1528876222.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:22.586Z,1528876222.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:22.996Z,1528876222.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:23.383Z,1528876223.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:23.792Z,1528876223.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:24.195Z,1528876224.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:24.568Z,1528876224.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:24.969Z,1528876224.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:25.368Z,1528876225.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:25.769Z,1528876225.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:26.173Z,1528876226.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:26.575Z,1528876226.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:26.979Z,1528876226.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:27.379Z,1528876227.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:27.767Z,1528876227.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:28.170Z,1528876228.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:28.580Z,1528876228.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:28.971Z,1528876228.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:29.376Z,1528876229.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:29.780Z,1528876229.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:30.173Z,1528876230.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:30.577Z,1528876230.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:30.971Z,1528876230.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:31.371Z,1528876231.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:31.780Z,1528876231.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:32.182Z,1528876232.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:32.577Z,1528876232.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:32.979Z,1528876232.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:33.384Z,1528876233.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:33.794Z,1528876233.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:34.171Z,1528876234.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:34.574Z,1528876234.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:34.967Z,1528876234.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:35.380Z,1528876235.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:35.788Z,1528876235.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:36.181Z,1528876236.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:36.570Z,1528876236.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:36.976Z,1528876236.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:37.380Z,1528876237.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:37.770Z,1528876237.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:38.179Z,1528876238.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:38.581Z,1528876238.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:38.984Z,1528876238.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:39.386Z,1528876239.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:39.770Z,1528876239.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:40.173Z,1528876240.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:40.574Z,1528876240.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:40.974Z,1528876240.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:41.382Z,1528876241.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:41.788Z,1528876241.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:42.178Z,1528876242.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:42.568Z,1528876242.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:42.973Z,1528876242.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:43.384Z,1528876243.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:43.772Z,1528876243.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:44.175Z,1528876244.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:44.585Z,1528876244.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:44.984Z,1528876244.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:45.385Z,1528876245.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:45.779Z,1528876245.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:46.172Z,1528876246.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:46.574Z,1528876246.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:46.975Z,1528876246.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:47.380Z,1528876247.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:47.785Z,1528876247.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:48.181Z,1528876248.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:48.572Z,1528876248.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:48.974Z,1528876248.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:49.380Z,1528876249.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:49.773Z,1528876249.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:50.180Z,1528876250.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:50.581Z,1528876250.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:50.985Z,1528876250.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:51.385Z,1528876251.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:51.780Z,1528876251.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:52.172Z,1528876252.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:52.574Z,1528876252.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:52.974Z,1528876252.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:53.380Z,1528876253.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:53.786Z,1528876253.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:54.181Z,1528876254.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:54.580Z,1528876254.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:54.973Z,1528876254.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:55.374Z,1528876255.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:55.774Z,1528876255.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:56.172Z,1528876256.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:56.586Z,1528876256.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:56.985Z,1528876256.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:57.387Z,1528876257.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:57.779Z,1528876257.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:58.172Z,1528876258.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:58.580Z,1528876258.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:58.974Z,1528876258.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:59.381Z,1528876259.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:50:59.785Z,1528876259.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:00.181Z,1528876260.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:00.572Z,1528876260.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:00.973Z,1528876260.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:01.378Z,1528876261.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:01.772Z,1528876261.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:02.172Z,1528876262.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:02.582Z,1528876262.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:02.985Z,1528876262.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:03.396Z,1528876263.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:03.775Z,1528876263.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:04.180Z,1528876264.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:04.580Z,1528876264.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:04.976Z,1528876264.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:05.383Z,1528876265.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:05.786Z,1528876265.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:06.187Z,1528876266.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:06.578Z,1528876266.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:06.983Z,1528876266.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:07.381Z,1528876267.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:07.775Z,1528876267.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:08.180Z,1528876268.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:08.582Z,1528876268.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:08.981Z,1528876268.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:09.386Z,1528876269.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:09.774Z,1528876269.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:10.177Z,1528876270.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:10.578Z,1528876270.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:10.984Z,1528876270.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:11.382Z,1528876271.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:11.786Z,1528876271.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:12.191Z,1528876272.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:12.560Z,1528876272.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:12.982Z,1528876272.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:13.365Z,1528876273.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:13.765Z,1528876273.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:14.169Z,1528876274.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:14.598Z,1528876274.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:14.996Z,1528876274.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:15.379Z,1528876275.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:15.770Z,1528876275.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:16.166Z,1528876276.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:16.576Z,1528876276.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:16.970Z,1528876276.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:17.375Z,1528876277.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:17.778Z,1528876277.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:18.176Z,1528876278.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:18.570Z,1528876278.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:18.975Z,1528876278.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:22.107Z,1528876282.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:22.259Z,1528876282.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:22.666Z,1528876282.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:23.068Z,1528876283.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:23.459Z,1528876283.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:23.865Z,1528876283.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:24.264Z,1528876284.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:24.641Z,1528876284.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:25.045Z,1528876285.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:25.470Z,1528876285.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:25.869Z,1528876285.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:26.276Z,1528876286.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:26.645Z,1528876286.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:27.043Z,1528876287.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:27.445Z,1528876287.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:27.846Z,1528876287.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:28.243Z,1528876288.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:28.676Z,1528876288.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:29.067Z,1528876289.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:29.475Z,1528876289.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:29.848Z,1528876289.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:30.252Z,1528876290.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:30.646Z,1528876290.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:31.052Z,1528876291.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:31.451Z,1528876291.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:31.855Z,1528876291.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:32.259Z,1528876292.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:32.649Z,1528876292.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:33.088Z,1528876293.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:33.447Z,1528876293.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:33.847Z,1528876293.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:34.248Z,1528876294.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:34.656Z,1528876294.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:35.059Z,1528876295.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:35.454Z,1528876295.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:35.851Z,1528876295.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:36.250Z,1528876296.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:36.648Z,1528876296.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:37.051Z,1528876297.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:37.456Z,1528876297.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:37.855Z,1528876297.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:38.260Z,1528876298.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:38.650Z,1528876298.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:39.056Z,1528876299.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:39.450Z,1528876299.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:39.856Z,1528876299.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:40.249Z,1528876300.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:40.664Z,1528876300.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:41.061Z,1528876301.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:41.457Z,1528876301.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:41.856Z,1528876301.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:42.252Z,1528876302.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:42.651Z,1528876302.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:43.060Z,1528876303.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:43.462Z,1528876303.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:43.860Z,1528876303.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:44.272Z,1528876304.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:44.655Z,1528876304.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:45.048Z,1528876305.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:45.454Z,1528876305.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:45.854Z,1528876305.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:46.253Z,1528876306.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:46.665Z,1528876306.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:47.065Z,1528876307.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:47.457Z,1528876307.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:47.854Z,1528876307.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:48.255Z,1528876308.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:48.649Z,1528876308.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:49.055Z,1528876309.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:49.462Z,1528876309.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:49.862Z,1528876309.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:50.272Z,1528876310.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:50.655Z,1528876310.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:51.051Z,1528876311.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:51.450Z,1528876311.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:51.855Z,1528876311.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:52.260Z,1528876312.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:52.672Z,1528876312.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:53.067Z,1528876313.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:53.458Z,1528876313.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:53.855Z,1528876313.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:54.266Z,1528876314.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:54.658Z,1528876314.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:55.061Z,1528876315.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:55.471Z,1528876315.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:55.867Z,1528876315.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:56.272Z,1528876316.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:56.645Z,1528876316.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:57.044Z,1528876317.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:57.446Z,1528876317.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:57.850Z,1528876317.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:58.244Z,1528876318.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:58.676Z,1528876318.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:59.056Z,1528876319.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:59.452Z,1528876319.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:51:59.851Z,1528876319.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:00.251Z,1528876320.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:00.649Z,1528876320.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:01.051Z,1528876321.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:01.456Z,1528876321.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:01.854Z,1528876321.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:02.259Z,1528876322.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:02.651Z,1528876322.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:03.050Z,1528876323.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:03.451Z,1528876323.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:03.851Z,1528876323.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:04.247Z,1528876324.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:04.659Z,1528876324.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:05.059Z,1528876325.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:05.456Z,1528876325.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:05.851Z,1528876325.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:06.251Z,1528876326.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:06.647Z,1528876326.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:07.056Z,1528876327.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:07.453Z,1528876327.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:07.854Z,1528876327.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:08.259Z,1528876328.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:08.650Z,1528876328.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:09.046Z,1528876329.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:09.452Z,1528876329.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:09.851Z,1528876329.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:10.251Z,1528876330.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:10.659Z,1528876330.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:11.059Z,1528876331.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:11.453Z,1528876331.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:11.851Z,1528876331.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:12.249Z,1528876332.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:12.647Z,1528876332.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:13.050Z,1528876333.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:13.455Z,1528876333.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:13.854Z,1528876333.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:14.259Z,1528876334.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:14.647Z,1528876334.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:15.047Z,1528876335.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:15.451Z,1528876335.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:15.851Z,1528876335.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:16.251Z,1528876336.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:16.655Z,1528876336.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:17.055Z,1528876337.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:17.452Z,1528876337.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:17.851Z,1528876337.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:18.247Z,1528876338.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:18.647Z,1528876338.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:19.052Z,1528876339.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:22.185Z,1528876342.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:22.345Z,1528876342.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:22.742Z,1528876342.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:23.135Z,1528876343.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:23.532Z,1528876343.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:23.933Z,1528876343.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:24.320Z,1528876344.320 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:24.320Z,1528876344.320 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89
2018-06-13T07:52:24.320Z,1528876344.320 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:52:24.338Z,1528876344.338 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:24.338Z,1528876344.338 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89
2018-06-13T07:52:24.338Z,1528876344.338 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:52:24.340Z,1528876344.340 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:24.340Z,1528876344.340 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 89
2018-06-13T07:52:24.340Z,1528876344.340 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:52:24.429Z,1528876344.429 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:52:24.429Z,1528876344.429 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:52:24.429Z,1528876344.429 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:52:24.817Z,1528876344.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:52:24.817Z,1528876344.817 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89
2018-06-13T07:52:24.818Z,1528876344.818 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:52:24.818Z,1528876344.818 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89
2018-06-13T07:52:24.818Z,1528876344.818 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:52:24.818Z,1528876344.818 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 89
2018-06-13T07:52:25.142Z,1528876345.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:52:25.143Z,1528876345.143 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:52:25.143Z,1528876345.143 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:52:25.143Z,1528876345.143 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:52:25.144Z,1528876345.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:52:25.144Z,1528876345.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:52:25.144Z,1528876345.144 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:52:25.145Z,1528876345.145 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:52:25.145Z,1528876345.145 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:52:25.523Z,1528876345.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:52:25.524Z,1528876345.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:25.916Z,1528876345.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:52:25.917Z,1528876345.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:26.320Z,1528876346.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:52:26.321Z,1528876346.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:26.721Z,1528876346.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:52:26.722Z,1528876346.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:27.118Z,1528876347.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:52:27.119Z,1528876347.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:27.548Z,1528876347.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:52:27.549Z,1528876347.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:27.949Z,1528876347.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:52:27.950Z,1528876347.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:28.322Z,1528876348.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:52:28.323Z,1528876348.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:28.719Z,1528876348.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:52:28.720Z,1528876348.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:29.128Z,1528876349.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:52:29.131Z,1528876349.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:29.518Z,1528876349.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:52:29.519Z,1528876349.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:29.924Z,1528876349.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:52:29.926Z,1528876349.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:30.321Z,1528876350.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:52:30.322Z,1528876350.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:30.723Z,1528876350.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:52:30.724Z,1528876350.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:31.152Z,1528876351.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:52:31.157Z,1528876351.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:31.527Z,1528876351.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:52:31.528Z,1528876351.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:31.918Z,1528876351.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:52:31.919Z,1528876351.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:32.322Z,1528876352.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:52:32.323Z,1528876352.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:32.722Z,1528876352.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:52:32.723Z,1528876352.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:33.118Z,1528876353.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:52:33.119Z,1528876353.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:33.536Z,1528876353.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:52:33.553Z,1528876353.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:33.936Z,1528876353.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:52:33.953Z,1528876353.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:34.327Z,1528876354.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:52:34.328Z,1528876354.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:34.723Z,1528876354.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:52:34.724Z,1528876354.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:35.123Z,1528876355.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:52:35.124Z,1528876355.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:35.518Z,1528876355.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:52:35.519Z,1528876355.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:35.925Z,1528876355.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:52:35.926Z,1528876355.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:36.323Z,1528876356.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:52:36.324Z,1528876356.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:36.729Z,1528876356.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:52:36.730Z,1528876356.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:37.140Z,1528876357.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:52:37.141Z,1528876357.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:37.540Z,1528876357.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:52:37.541Z,1528876357.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:37.924Z,1528876357.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T07:52:37.925Z,1528876357.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:38.327Z,1528876358.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T07:52:38.328Z,1528876358.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:38.734Z,1528876358.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T07:52:38.735Z,1528876358.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:39.122Z,1528876359.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T07:52:39.123Z,1528876359.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:39.540Z,1528876359.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T07:52:39.541Z,1528876359.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:39.932Z,1528876359.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T07:52:39.933Z,1528876359.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:40.332Z,1528876360.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:52:40.333Z,1528876360.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:40.737Z,1528876360.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:52:40.738Z,1528876360.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:41.128Z,1528876361.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T07:52:41.129Z,1528876361.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:41.524Z,1528876361.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:52:41.524Z,1528876361.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:41.926Z,1528876361.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:52:41.927Z,1528876361.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:42.326Z,1528876362.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:52:42.327Z,1528876362.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:42.734Z,1528876362.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:52:42.735Z,1528876362.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:43.137Z,1528876363.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:52:43.138Z,1528876363.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:43.534Z,1528876363.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T07:52:43.535Z,1528876363.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:43.930Z,1528876363.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:52:43.931Z,1528876363.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:44.326Z,1528876364.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:44.728Z,1528876364.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:45.124Z,1528876365.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:45.544Z,1528876365.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:45.934Z,1528876365.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:46.334Z,1528876366.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:46.727Z,1528876366.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:47.127Z,1528876367.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:47.526Z,1528876367.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:47.925Z,1528876367.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:48.332Z,1528876368.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:48.734Z,1528876368.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:49.138Z,1528876369.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:49.530Z,1528876369.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:49.927Z,1528876369.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:50.334Z,1528876370.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:50.734Z,1528876370.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:51.112Z,1528876371.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:51.545Z,1528876371.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:51.948Z,1528876371.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:52.336Z,1528876372.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:52.712Z,1528876372.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:53.112Z,1528876373.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:53.512Z,1528876373.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:53.917Z,1528876373.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:54.337Z,1528876374.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:54.746Z,1528876374.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:55.144Z,1528876375.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:55.551Z,1528876375.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:55.919Z,1528876375.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:56.319Z,1528876376.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:56.718Z,1528876376.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:57.118Z,1528876377.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:57.547Z,1528876377.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:57.931Z,1528876377.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:58.332Z,1528876378.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:58.723Z,1528876378.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:59.133Z,1528876379.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:59.523Z,1528876379.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:52:59.924Z,1528876379.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:00.330Z,1528876380.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:00.732Z,1528876380.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:01.131Z,1528876381.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:01.527Z,1528876381.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:01.923Z,1528876381.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:02.324Z,1528876382.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:02.723Z,1528876382.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:03.122Z,1528876383.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:03.531Z,1528876383.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:03.928Z,1528876383.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:04.332Z,1528876384.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:04.723Z,1528876384.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:05.122Z,1528876385.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:05.522Z,1528876385.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:05.924Z,1528876385.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:06.322Z,1528876386.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:06.727Z,1528876386.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:07.131Z,1528876387.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:07.527Z,1528876387.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:07.922Z,1528876387.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:08.323Z,1528876388.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:08.726Z,1528876388.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:09.122Z,1528876389.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:09.544Z,1528876389.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:09.933Z,1528876389.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:10.333Z,1528876390.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:10.726Z,1528876390.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:11.122Z,1528876391.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:11.520Z,1528876391.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:11.932Z,1528876391.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:12.322Z,1528876392.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:12.734Z,1528876392.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:13.136Z,1528876393.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:13.531Z,1528876393.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:13.928Z,1528876393.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:14.337Z,1528876394.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:14.732Z,1528876394.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:15.124Z,1528876395.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:15.548Z,1528876395.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:15.932Z,1528876395.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:16.333Z,1528876396.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:16.735Z,1528876396.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:17.128Z,1528876397.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:17.531Z,1528876397.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:17.932Z,1528876397.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:18.340Z,1528876398.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:18.734Z,1528876398.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:19.144Z,1528876399.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:19.148Z,1528876399.148 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T07:48:19.1Z
2018-06-13T07:53:19.148Z,1528876399.148 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T07:53:19.148Z,1528876399.148 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T07:53:22.250Z,1528876402.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:23.276Z,1528876403.276 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180613T032335/Courier0104.lzma
2018-06-13T07:53:23.335Z,1528876403.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:23.460Z,1528876403.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:23.823Z,1528876403.823 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0104.lzma.bak
2018-06-13T07:53:23.824Z,1528876403.824 [DataOverHttps](INFO): SBD MOMSN=8328848
2018-06-13T07:53:23.904Z,1528876403.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:25.790Z,1528876405.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:25.947Z,1528876405.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:29.050Z,1528876409.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:29.194Z,1528876409.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:29.604Z,1528876409.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:30.002Z,1528876410.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:30.399Z,1528876410.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:30.794Z,1528876410.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:31.197Z,1528876411.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:31.594Z,1528876411.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:31.994Z,1528876411.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:35.105Z,1528876415.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:35.185Z,1528876415.185 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0105.lzma
2018-06-13T07:53:35.264Z,1528876415.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:35.648Z,1528876415.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:35.986Z,1528876415.986 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0105.lzma.bak
2018-06-13T07:53:35.986Z,1528876415.986 [DataOverHttps](INFO): SBD MOMSN=8328850
2018-06-13T07:53:36.073Z,1528876416.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:37.924Z,1528876417.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:37.947Z,1528876417.947 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T07:53:37.947Z,1528876417.947 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T07:53:37.947Z,1528876417.947 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T07:53:38.100Z,1528876418.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:41.254Z,1528876421.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:41.424Z,1528876421.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:41.810Z,1528876421.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:42.202Z,1528876422.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:42.604Z,1528876422.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:43.003Z,1528876423.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:43.410Z,1528876423.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:43.812Z,1528876423.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:44.208Z,1528876424.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:44.607Z,1528876424.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:44.980Z,1528876424.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:45.384Z,1528876425.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:45.787Z,1528876425.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:46.184Z,1528876426.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:46.615Z,1528876426.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:47.015Z,1528876427.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:47.399Z,1528876427.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:47.790Z,1528876427.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:48.196Z,1528876428.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:48.588Z,1528876428.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:48.991Z,1528876428.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:49.391Z,1528876429.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:49.796Z,1528876429.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:50.199Z,1528876430.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:50.600Z,1528876430.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:50.988Z,1528876430.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:51.391Z,1528876431.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:51.799Z,1528876431.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:52.188Z,1528876432.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:52.597Z,1528876432.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:52.000Z,1528876433.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:53.396Z,1528876433.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:53.791Z,1528876433.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:54.189Z,1528876434.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:54.586Z,1528876434.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:54.992Z,1528876434.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:55.387Z,1528876435.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:55.791Z,1528876435.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:56.214Z,1528876436.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:56.600Z,1528876436.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:56.992Z,1528876436.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:57.390Z,1528876437.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:57.791Z,1528876437.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:58.187Z,1528876438.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:58.595Z,1528876438.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:58.999Z,1528876438.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:59.401Z,1528876439.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:53:59.796Z,1528876439.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:00.192Z,1528876440.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:00.587Z,1528876440.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:00.992Z,1528876440.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:01.469Z,1528876441.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:01.837Z,1528876441.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:02.311Z,1528876442.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:02.635Z,1528876442.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:02.991Z,1528876442.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:03.390Z,1528876443.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:03.791Z,1528876443.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:04.189Z,1528876444.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:04.595Z,1528876444.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:05.000Z,1528876445.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:05.395Z,1528876445.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:05.792Z,1528876445.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:06.191Z,1528876446.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:06.586Z,1528876446.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:06.991Z,1528876446.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:07.391Z,1528876447.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:07.795Z,1528876447.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:08.203Z,1528876448.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:08.600Z,1528876448.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:08.996Z,1528876448.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:09.391Z,1528876449.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:09.793Z,1528876449.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:10.188Z,1528876450.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:10.601Z,1528876450.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:11.001Z,1528876451.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:11.395Z,1528876451.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:11.796Z,1528876451.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:12.191Z,1528876452.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:12.588Z,1528876452.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:12.991Z,1528876452.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:13.391Z,1528876453.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:13.799Z,1528876453.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:14.205Z,1528876454.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:14.601Z,1528876454.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:14.995Z,1528876454.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:15.391Z,1528876455.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:15.794Z,1528876455.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:16.188Z,1528876456.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:16.601Z,1528876456.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:17.001Z,1528876457.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:17.397Z,1528876457.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:17.794Z,1528876457.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:18.195Z,1528876458.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:18.605Z,1528876458.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:19.005Z,1528876459.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:19.402Z,1528876459.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:19.791Z,1528876459.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:20.198Z,1528876460.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:20.603Z,1528876460.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:21.005Z,1528876461.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:21.405Z,1528876461.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:21.802Z,1528876461.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:22.193Z,1528876462.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:22.605Z,1528876462.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:23.003Z,1528876463.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:23.405Z,1528876463.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:23.789Z,1528876463.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:24.192Z,1528876464.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:24.604Z,1528876464.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:25.012Z,1528876465.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:25.405Z,1528876465.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:25.793Z,1528876465.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:26.192Z,1528876466.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:26.602Z,1528876466.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:27.002Z,1528876467.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:27.402Z,1528876467.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:27.791Z,1528876467.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:28.205Z,1528876468.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:28.601Z,1528876468.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:29.013Z,1528876469.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:29.404Z,1528876469.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:29.795Z,1528876469.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:30.192Z,1528876470.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:30.605Z,1528876470.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:31.005Z,1528876471.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:31.402Z,1528876471.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:31.792Z,1528876471.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:32.196Z,1528876472.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:32.602Z,1528876472.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:33.006Z,1528876473.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:33.399Z,1528876473.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:33.795Z,1528876473.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:34.192Z,1528876474.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:34.601Z,1528876474.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:35.004Z,1528876475.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:35.401Z,1528876475.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:35.793Z,1528876475.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:36.194Z,1528876476.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:36.605Z,1528876476.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:37.012Z,1528876477.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:37.401Z,1528876477.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:37.801Z,1528876477.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:38.194Z,1528876478.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:38.612Z,1528876478.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:41.711Z,1528876481.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:41.887Z,1528876481.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:42.260Z,1528876482.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:42.659Z,1528876482.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:43.066Z,1528876483.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:43.451Z,1528876483.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:43.864Z,1528876483.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:44.268Z,1528876484.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:44.664Z,1528876484.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:45.055Z,1528876485.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:45.456Z,1528876485.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:45.856Z,1528876485.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:46.255Z,1528876486.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:46.668Z,1528876486.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:47.072Z,1528876487.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:47.468Z,1528876487.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:47.864Z,1528876487.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:48.256Z,1528876488.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:48.656Z,1528876488.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:49.061Z,1528876489.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:49.455Z,1528876489.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:49.876Z,1528876489.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:50.269Z,1528876490.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:50.670Z,1528876490.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:51.064Z,1528876491.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:51.464Z,1528876491.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:51.866Z,1528876491.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:52.260Z,1528876492.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:52.676Z,1528876492.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:53.076Z,1528876493.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:53.472Z,1528876493.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:53.860Z,1528876493.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:54.258Z,1528876494.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:54.666Z,1528876494.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:55.057Z,1528876495.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:55.458Z,1528876495.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:55.866Z,1528876495.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:56.269Z,1528876496.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:56.671Z,1528876496.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:57.064Z,1528876497.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:57.467Z,1528876497.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:57.864Z,1528876497.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:58.264Z,1528876498.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:58.666Z,1528876498.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:59.076Z,1528876499.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:59.469Z,1528876499.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:54:59.864Z,1528876499.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:00.258Z,1528876500.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:00.666Z,1528876500.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:01.069Z,1528876501.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:01.476Z,1528876501.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:01.864Z,1528876501.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:02.262Z,1528876502.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:02.669Z,1528876502.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:03.069Z,1528876503.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:03.466Z,1528876503.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:03.864Z,1528876503.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:04.272Z,1528876504.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:04.668Z,1528876504.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:05.080Z,1528876505.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:05.462Z,1528876505.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:05.858Z,1528876505.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:06.269Z,1528876506.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:06.666Z,1528876506.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:07.080Z,1528876507.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:07.483Z,1528876507.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:07.859Z,1528876507.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:08.258Z,1528876508.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:08.671Z,1528876508.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:09.080Z,1528876509.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:09.463Z,1528876509.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:09.870Z,1528876509.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:10.272Z,1528876510.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:10.673Z,1528876510.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:11.085Z,1528876511.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:11.472Z,1528876511.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:11.872Z,1528876511.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:12.266Z,1528876512.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:12.663Z,1528876512.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:13.063Z,1528876513.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:13.463Z,1528876513.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:13.855Z,1528876513.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:14.254Z,1528876514.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:14.664Z,1528876514.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:15.064Z,1528876515.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:15.460Z,1528876515.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:15.868Z,1528876515.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:16.252Z,1528876516.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:16.668Z,1528876516.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:17.064Z,1528876517.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:17.460Z,1528876517.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:17.854Z,1528876517.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:18.255Z,1528876518.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:18.659Z,1528876518.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:19.063Z,1528876519.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:19.463Z,1528876519.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:19.856Z,1528876519.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:20.254Z,1528876520.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:20.664Z,1528876520.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:21.059Z,1528876521.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:21.459Z,1528876521.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:21.870Z,1528876521.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:22.253Z,1528876522.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:22.661Z,1528876522.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:23.087Z,1528876523.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:23.460Z,1528876523.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:23.865Z,1528876523.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:24.256Z,1528876524.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:24.666Z,1528876524.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:25.068Z,1528876525.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:25.465Z,1528876525.465 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:25.465Z,1528876525.465 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90
2018-06-13T07:55:25.465Z,1528876525.465 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:55:25.467Z,1528876525.467 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:25.467Z,1528876525.467 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90
2018-06-13T07:55:25.467Z,1528876525.467 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:55:25.469Z,1528876525.469 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:25.469Z,1528876525.469 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 90
2018-06-13T07:55:25.469Z,1528876525.469 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:55:25.561Z,1528876525.561 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:55:25.561Z,1528876525.561 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:55:25.562Z,1528876525.562 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:55:25.950Z,1528876525.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:55:25.950Z,1528876525.950 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90
2018-06-13T07:55:25.950Z,1528876525.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:55:25.950Z,1528876525.950 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90
2018-06-13T07:55:25.951Z,1528876525.951 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:55:25.951Z,1528876525.951 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 90
2018-06-13T07:55:26.261Z,1528876526.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:55:26.261Z,1528876526.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:55:26.261Z,1528876526.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:55:26.262Z,1528876526.262 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:55:26.262Z,1528876526.262 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:55:26.263Z,1528876526.263 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:55:26.263Z,1528876526.263 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:55:26.263Z,1528876526.263 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:55:26.264Z,1528876526.264 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:55:26.670Z,1528876526.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:55:26.671Z,1528876526.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:27.069Z,1528876527.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:55:27.070Z,1528876527.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:27.466Z,1528876527.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:55:27.467Z,1528876527.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:27.846Z,1528876527.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:55:27.847Z,1528876527.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:28.252Z,1528876528.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:55:28.262Z,1528876528.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:28.678Z,1528876528.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:55:28.679Z,1528876528.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:29.077Z,1528876529.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:55:29.078Z,1528876529.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:29.477Z,1528876529.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:55:29.478Z,1528876529.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:29.853Z,1528876529.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:55:29.854Z,1528876529.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:30.252Z,1528876530.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:55:30.253Z,1528876530.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:30.676Z,1528876530.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:55:30.677Z,1528876530.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:31.075Z,1528876531.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:55:31.076Z,1528876531.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:31.478Z,1528876531.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:55:31.479Z,1528876531.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:31.856Z,1528876531.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:55:31.873Z,1528876531.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:32.252Z,1528876532.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:55:32.254Z,1528876532.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:32.679Z,1528876532.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:55:32.680Z,1528876532.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:33.082Z,1528876533.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:55:33.083Z,1528876533.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:33.459Z,1528876533.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:55:33.460Z,1528876533.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:33.863Z,1528876533.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:55:33.864Z,1528876533.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:34.253Z,1528876534.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:55:34.254Z,1528876534.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:34.659Z,1528876534.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:55:34.660Z,1528876534.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:35.063Z,1528876535.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:55:35.064Z,1528876535.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:35.460Z,1528876535.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:55:35.461Z,1528876535.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:35.853Z,1528876535.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:55:35.854Z,1528876535.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:36.264Z,1528876536.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:55:36.265Z,1528876536.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:36.653Z,1528876536.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:55:36.654Z,1528876536.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:37.067Z,1528876537.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:55:37.067Z,1528876537.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:37.463Z,1528876537.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:55:37.464Z,1528876537.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:37.859Z,1528876537.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:55:37.860Z,1528876537.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:38.257Z,1528876538.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T07:55:38.258Z,1528876538.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:38.659Z,1528876538.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T07:55:38.660Z,1528876538.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:41.789Z,1528876541.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-06-13T07:55:41.790Z,1528876541.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:41.944Z,1528876541.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T07:55:41.945Z,1528876541.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:42.350Z,1528876542.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T07:55:42.351Z,1528876542.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:42.748Z,1528876542.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T07:55:42.749Z,1528876542.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:43.142Z,1528876543.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T07:55:43.143Z,1528876543.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:43.537Z,1528876543.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T07:55:43.538Z,1528876543.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:43.941Z,1528876543.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T07:55:43.942Z,1528876543.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:44.328Z,1528876544.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T07:55:44.350Z,1528876544.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:44.753Z,1528876544.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T07:55:44.754Z,1528876544.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:45.150Z,1528876545.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T07:55:45.151Z,1528876545.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:45.554Z,1528876545.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:45.929Z,1528876545.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:46.323Z,1528876546.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:46.727Z,1528876546.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:47.152Z,1528876547.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:47.523Z,1528876547.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:47.955Z,1528876547.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:48.355Z,1528876548.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:48.739Z,1528876548.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:49.128Z,1528876549.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:49.532Z,1528876549.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:49.929Z,1528876549.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:50.331Z,1528876550.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:50.739Z,1528876550.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:51.136Z,1528876551.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:51.535Z,1528876551.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:51.934Z,1528876551.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:52.338Z,1528876552.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:52.735Z,1528876552.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:53.139Z,1528876553.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:53.539Z,1528876553.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:53.930Z,1528876553.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:54.331Z,1528876554.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:54.736Z,1528876554.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:55.139Z,1528876555.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:55.544Z,1528876555.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:55.932Z,1528876555.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:56.329Z,1528876556.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:56.740Z,1528876556.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:57.135Z,1528876557.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:57.535Z,1528876557.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:57.931Z,1528876557.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:58.330Z,1528876558.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:58.735Z,1528876558.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:59.139Z,1528876559.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:59.535Z,1528876559.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:55:59.936Z,1528876559.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:00.332Z,1528876560.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:00.736Z,1528876560.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:01.138Z,1528876561.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:01.544Z,1528876561.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:01.932Z,1528876561.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:02.330Z,1528876562.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:02.741Z,1528876562.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:03.139Z,1528876563.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:03.540Z,1528876563.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:03.933Z,1528876563.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:04.328Z,1528876564.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:04.741Z,1528876564.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:05.139Z,1528876565.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:05.536Z,1528876565.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:05.930Z,1528876565.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:06.331Z,1528876566.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:06.736Z,1528876566.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:07.144Z,1528876567.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:07.548Z,1528876567.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:07.931Z,1528876567.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:08.331Z,1528876568.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:08.740Z,1528876568.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:09.139Z,1528876569.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:09.539Z,1528876569.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:09.931Z,1528876569.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:10.336Z,1528876570.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:10.739Z,1528876570.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:11.140Z,1528876571.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:11.544Z,1528876571.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:11.932Z,1528876571.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:12.336Z,1528876572.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:12.744Z,1528876572.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:13.138Z,1528876573.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:13.540Z,1528876573.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:13.928Z,1528876573.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:14.336Z,1528876574.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:14.740Z,1528876574.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:15.140Z,1528876575.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:15.539Z,1528876575.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:15.932Z,1528876575.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:16.328Z,1528876576.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:16.744Z,1528876576.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:17.141Z,1528876577.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:17.536Z,1528876577.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:17.931Z,1528876577.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:18.334Z,1528876578.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:18.736Z,1528876578.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:19.144Z,1528876579.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:19.540Z,1528876579.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:19.939Z,1528876579.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:20.346Z,1528876580.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:20.740Z,1528876580.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:21.153Z,1528876581.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:21.542Z,1528876581.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:21.942Z,1528876581.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:22.344Z,1528876582.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:22.750Z,1528876582.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:23.150Z,1528876583.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:23.550Z,1528876583.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:23.946Z,1528876583.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:24.328Z,1528876584.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:24.752Z,1528876584.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:25.153Z,1528876585.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:25.555Z,1528876585.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:25.924Z,1528876585.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:26.337Z,1528876586.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:26.735Z,1528876586.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:27.136Z,1528876587.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:27.544Z,1528876587.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:27.940Z,1528876587.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:28.328Z,1528876588.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:28.742Z,1528876588.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:29.136Z,1528876589.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:29.536Z,1528876589.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:29.942Z,1528876589.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:30.346Z,1528876590.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:30.740Z,1528876590.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:31.140Z,1528876591.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:31.540Z,1528876591.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:31.929Z,1528876591.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:32.338Z,1528876592.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:32.726Z,1528876592.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:33.154Z,1528876593.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:33.552Z,1528876593.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:33.955Z,1528876593.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:34.352Z,1528876594.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:34.728Z,1528876594.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:35.128Z,1528876595.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:35.524Z,1528876595.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:35.959Z,1528876595.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:36.359Z,1528876596.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:36.760Z,1528876596.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:37.132Z,1528876597.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:37.527Z,1528876597.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:37.924Z,1528876597.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:38.330Z,1528876598.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:38.728Z,1528876598.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:39.159Z,1528876599.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:39.556Z,1528876599.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:39.962Z,1528876599.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:43.036Z,1528876603.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:43.272Z,1528876603.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:43.607Z,1528876603.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:44.011Z,1528876604.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:44.411Z,1528876604.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:44.787Z,1528876604.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:45.188Z,1528876605.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:45.588Z,1528876605.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:45.995Z,1528876605.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:46.396Z,1528876606.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:46.791Z,1528876606.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:47.186Z,1528876607.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:47.588Z,1528876607.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:47.986Z,1528876607.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:48.387Z,1528876608.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:48.789Z,1528876608.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:49.195Z,1528876609.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:49.596Z,1528876609.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:49.983Z,1528876609.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:50.386Z,1528876610.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:50.790Z,1528876610.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:51.192Z,1528876611.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:51.591Z,1528876611.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:51.988Z,1528876611.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:52.386Z,1528876612.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:52.791Z,1528876612.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:53.190Z,1528876613.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:53.591Z,1528876613.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:53.987Z,1528876613.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:54.383Z,1528876614.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:54.791Z,1528876614.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:55.195Z,1528876615.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:55.596Z,1528876615.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:55.998Z,1528876615.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:56.387Z,1528876616.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:56.795Z,1528876616.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:57.195Z,1528876617.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:57.591Z,1528876617.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:57.988Z,1528876617.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:58.386Z,1528876618.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:58.796Z,1528876618.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:59.194Z,1528876619.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:59.592Z,1528876619.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:56:59.991Z,1528876619.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:00.387Z,1528876620.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:00.795Z,1528876620.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:01.195Z,1528876621.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:01.594Z,1528876621.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:01.987Z,1528876621.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:02.387Z,1528876622.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:02.796Z,1528876622.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:03.195Z,1528876623.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:03.595Z,1528876623.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:03.995Z,1528876623.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:04.386Z,1528876624.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:04.788Z,1528876624.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:05.196Z,1528876625.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:05.590Z,1528876625.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:05.992Z,1528876625.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:06.395Z,1528876626.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:06.792Z,1528876626.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:07.187Z,1528876627.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:07.590Z,1528876627.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:07.992Z,1528876627.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:08.387Z,1528876628.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:08.787Z,1528876628.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:09.192Z,1528876629.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:09.596Z,1528876629.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:09.995Z,1528876629.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:10.387Z,1528876630.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:10.787Z,1528876630.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:11.196Z,1528876631.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:11.586Z,1528876631.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:11.992Z,1528876631.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:12.395Z,1528876632.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:12.796Z,1528876632.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:13.188Z,1528876633.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:13.590Z,1528876633.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:13.987Z,1528876633.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:14.388Z,1528876634.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:14.790Z,1528876634.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:15.196Z,1528876635.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:15.598Z,1528876635.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:15.995Z,1528876635.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:16.388Z,1528876636.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:16.788Z,1528876636.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:17.201Z,1528876637.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:17.585Z,1528876637.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:18.000Z,1528876638.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:18.398Z,1528876638.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:18.793Z,1528876638.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:19.190Z,1528876639.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:19.588Z,1528876639.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:19.984Z,1528876639.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:20.387Z,1528876640.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:20.791Z,1528876640.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:21.201Z,1528876641.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:21.594Z,1528876641.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:22.004Z,1528876642.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:22.384Z,1528876642.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:22.786Z,1528876642.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:23.195Z,1528876643.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:23.584Z,1528876643.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:24.000Z,1528876644.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:24.396Z,1528876644.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:24.794Z,1528876644.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:25.188Z,1528876645.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:25.600Z,1528876645.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:25.996Z,1528876645.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:26.406Z,1528876646.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:26.792Z,1528876646.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:27.200Z,1528876647.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:27.600Z,1528876647.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:28.004Z,1528876648.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:28.384Z,1528876648.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:28.787Z,1528876648.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:29.194Z,1528876649.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:29.584Z,1528876649.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:30.000Z,1528876650.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:30.396Z,1528876650.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:30.793Z,1528876650.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:31.188Z,1528876651.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:31.592Z,1528876651.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:31.987Z,1528876651.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:32.387Z,1528876652.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:32.788Z,1528876652.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:33.204Z,1528876653.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:33.600Z,1528876653.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:34.001Z,1528876654.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:34.391Z,1528876654.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:34.788Z,1528876654.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:35.189Z,1528876655.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:35.585Z,1528876655.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:35.996Z,1528876655.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:36.401Z,1528876656.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:36.793Z,1528876656.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:37.188Z,1528876657.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:37.596Z,1528876657.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:37.984Z,1528876657.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:38.396Z,1528876658.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:38.802Z,1528876658.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:41.907Z,1528876661.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:42.089Z,1528876662.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:42.487Z,1528876662.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:42.860Z,1528876662.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:43.257Z,1528876663.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:43.665Z,1528876663.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:44.060Z,1528876664.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:44.467Z,1528876664.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:44.867Z,1528876664.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:45.256Z,1528876665.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:45.658Z,1528876665.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:46.066Z,1528876666.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:46.456Z,1528876666.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:46.868Z,1528876666.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:47.267Z,1528876667.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:47.665Z,1528876667.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:48.059Z,1528876668.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:48.461Z,1528876668.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:48.856Z,1528876668.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:49.218Z,1528876669.218 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T07:57:49.219Z,1528876669.219 [NAL9602] Data Fault, FailCount= 5
2018-06-13T07:57:49.219Z,1528876669.219 [NAL9602](ERROR): Data Fault
2018-06-13T07:57:49.280Z,1528876669.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:49.365Z,1528876669.365 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T07:57:49.365Z,1528876669.365 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T07:57:49.618Z,1528876669.618 [NAL9602](INFO): Powering down
2018-06-13T07:57:49.673Z,1528876669.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:49.759Z,1528876669.759 [CBIT](INFO): Critical error at 20180613T075749
2018-06-13T07:57:50.054Z,1528876670.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:50.458Z,1528876670.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:50.857Z,1528876670.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:51.254Z,1528876671.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:51.659Z,1528876671.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:52.056Z,1528876672.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:52.455Z,1528876672.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:52.858Z,1528876672.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:53.262Z,1528876673.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:53.656Z,1528876673.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:54.059Z,1528876674.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:54.457Z,1528876674.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:54.854Z,1528876674.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:55.259Z,1528876675.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:55.657Z,1528876675.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:56.054Z,1528876676.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:56.459Z,1528876676.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:56.857Z,1528876676.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:57.255Z,1528876677.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:57.659Z,1528876677.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:58.057Z,1528876678.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:58.455Z,1528876678.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:58.859Z,1528876678.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:59.257Z,1528876679.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:57:59.655Z,1528876679.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:00.058Z,1528876680.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:00.457Z,1528876680.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:00.864Z,1528876680.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:01.259Z,1528876681.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:01.661Z,1528876681.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:02.068Z,1528876682.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:02.466Z,1528876682.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:02.865Z,1528876682.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:03.265Z,1528876683.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:03.669Z,1528876683.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:04.052Z,1528876684.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:04.448Z,1528876684.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:04.861Z,1528876684.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:05.252Z,1528876685.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:05.648Z,1528876685.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:06.051Z,1528876686.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:06.456Z,1528876686.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:06.852Z,1528876686.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:07.250Z,1528876687.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:07.660Z,1528876687.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:08.049Z,1528876688.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:08.454Z,1528876688.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:08.856Z,1528876688.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:09.251Z,1528876689.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:09.655Z,1528876689.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:10.055Z,1528876690.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:10.451Z,1528876690.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:10.854Z,1528876690.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:11.255Z,1528876691.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:11.652Z,1528876691.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:12.054Z,1528876692.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:12.456Z,1528876692.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:12.855Z,1528876692.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:13.254Z,1528876693.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:13.656Z,1528876693.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:14.052Z,1528876694.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:14.454Z,1528876694.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:14.855Z,1528876694.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:15.252Z,1528876695.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:15.654Z,1528876695.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:16.055Z,1528876696.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:16.455Z,1528876696.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:16.854Z,1528876696.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:17.259Z,1528876697.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:17.656Z,1528876697.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:18.060Z,1528876698.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:18.455Z,1528876698.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:18.854Z,1528876698.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:19.254Z,1528876699.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:19.655Z,1528876699.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:20.052Z,1528876700.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:20.454Z,1528876700.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:20.855Z,1528876700.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:21.253Z,1528876701.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:21.660Z,1528876701.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:22.055Z,1528876702.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:22.452Z,1528876702.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:22.854Z,1528876702.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:23.255Z,1528876703.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:23.652Z,1528876703.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:24.054Z,1528876704.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:24.456Z,1528876704.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:24.854Z,1528876704.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:25.254Z,1528876705.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:25.655Z,1528876705.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:26.053Z,1528876706.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:26.454Z,1528876706.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:26.454Z,1528876706.454 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91
2018-06-13T07:58:26.454Z,1528876706.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T07:58:26.456Z,1528876706.456 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:26.456Z,1528876706.456 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91
2018-06-13T07:58:26.456Z,1528876706.456 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T07:58:26.458Z,1528876706.458 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:26.458Z,1528876706.458 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 91
2018-06-13T07:58:26.458Z,1528876706.458 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T07:58:26.537Z,1528876706.537 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T07:58:26.537Z,1528876706.537 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T07:58:26.538Z,1528876706.538 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T07:58:26.945Z,1528876706.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T07:58:26.945Z,1528876706.945 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91
2018-06-13T07:58:26.946Z,1528876706.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T07:58:26.946Z,1528876706.946 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91
2018-06-13T07:58:26.946Z,1528876706.946 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T07:58:26.946Z,1528876706.946 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 91
2018-06-13T07:58:27.252Z,1528876707.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T07:58:27.252Z,1528876707.252 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:58:27.253Z,1528876707.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:58:27.253Z,1528876707.253 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T07:58:27.253Z,1528876707.253 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:58:27.254Z,1528876707.254 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:58:27.254Z,1528876707.254 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T07:58:27.255Z,1528876707.255 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T07:58:27.255Z,1528876707.255 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T07:58:27.663Z,1528876707.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T07:58:27.664Z,1528876707.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:28.058Z,1528876708.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T07:58:28.059Z,1528876708.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:28.457Z,1528876708.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T07:58:28.458Z,1528876708.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:28.854Z,1528876708.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T07:58:28.855Z,1528876708.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:29.257Z,1528876709.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T07:58:29.258Z,1528876709.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:29.655Z,1528876709.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T07:58:29.655Z,1528876709.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:30.057Z,1528876710.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T07:58:30.057Z,1528876710.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:30.462Z,1528876710.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T07:58:30.463Z,1528876710.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:30.857Z,1528876710.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T07:58:30.858Z,1528876710.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:31.263Z,1528876711.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T07:58:31.264Z,1528876711.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:31.661Z,1528876711.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T07:58:31.662Z,1528876711.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:32.056Z,1528876712.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T07:58:32.057Z,1528876712.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:32.463Z,1528876712.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T07:58:32.464Z,1528876712.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:32.859Z,1528876712.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T07:58:32.860Z,1528876712.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:33.257Z,1528876713.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T07:58:33.258Z,1528876713.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:33.663Z,1528876713.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T07:58:33.664Z,1528876713.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:34.061Z,1528876714.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T07:58:34.062Z,1528876714.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:34.456Z,1528876714.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T07:58:34.458Z,1528876714.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:34.863Z,1528876714.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T07:58:34.864Z,1528876714.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:35.269Z,1528876715.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T07:58:35.270Z,1528876715.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:35.659Z,1528876715.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T07:58:35.660Z,1528876715.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:36.057Z,1528876716.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T07:58:36.058Z,1528876716.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:36.468Z,1528876716.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T07:58:36.469Z,1528876716.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:36.862Z,1528876716.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T07:58:36.863Z,1528876716.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:37.257Z,1528876717.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T07:58:37.258Z,1528876717.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:37.661Z,1528876717.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T07:58:37.662Z,1528876717.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:38.059Z,1528876718.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T07:58:38.060Z,1528876718.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:38.464Z,1528876718.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T07:58:38.465Z,1528876718.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:38.468Z,1528876718.468 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T07:58:38.468Z,1528876718.468 [Default:CheckIn:C.Wait] Stopped
2018-06-13T07:58:38.468Z,1528876718.468 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T07:58:38.468Z,1528876718.468 [Default:CheckIn:D] Running Loop=1
2018-06-13T07:58:38.864Z,1528876718.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T07:58:38.866Z,1528876718.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:38.869Z,1528876718.869 [Default:CheckIn:D] Stopped
2018-06-13T07:58:38.869Z,1528876718.869 [Default:CheckIn:E] Running Loop=1
2018-06-13T07:58:41.970Z,1528876721.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T07:58:41.971Z,1528876721.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:41.975Z,1528876721.975 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 271.423730 min 
2018-06-13T07:58:41.975Z,1528876721.975 [Default:CheckIn:E] Stopped
2018-06-13T07:58:41.975Z,1528876721.975 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T07:58:41.975Z,1528876721.975 [Default:CheckIn] Stopped
2018-06-13T07:58:41.975Z,1528876721.975 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T07:58:41.975Z,1528876721.975 [Default:CheckIn](INFO): Running loop #27
2018-06-13T07:58:41.975Z,1528876721.975 [Default:CheckIn] Running Loop=27
2018-06-13T07:58:41.976Z,1528876721.976 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T07:58:41.976Z,1528876721.976 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T07:58:42.128Z,1528876722.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T07:58:42.133Z,1528876722.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:42.503Z,1528876722.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T07:58:42.504Z,1528876722.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:42.901Z,1528876722.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T07:58:42.902Z,1528876722.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:43.309Z,1528876723.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T07:58:43.310Z,1528876723.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:43.699Z,1528876723.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T07:58:43.700Z,1528876723.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:44.097Z,1528876724.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T07:58:44.098Z,1528876724.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:44.503Z,1528876724.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T07:58:44.504Z,1528876724.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:44.899Z,1528876724.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T07:58:44.900Z,1528876724.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:45.298Z,1528876725.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T07:58:45.299Z,1528876725.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:45.712Z,1528876725.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T07:58:45.713Z,1528876725.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:46.098Z,1528876726.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T07:58:46.099Z,1528876726.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:46.508Z,1528876726.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:46.908Z,1528876726.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:47.307Z,1528876727.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:47.703Z,1528876727.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:48.103Z,1528876728.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:48.509Z,1528876728.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:48.899Z,1528876728.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:49.302Z,1528876729.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:49.705Z,1528876729.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:50.103Z,1528876730.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:50.503Z,1528876730.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:50.904Z,1528876730.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:51.299Z,1528876731.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:51.708Z,1528876731.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:52.111Z,1528876732.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:52.500Z,1528876732.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:52.916Z,1528876732.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:53.315Z,1528876733.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:53.692Z,1528876733.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:54.095Z,1528876734.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:54.492Z,1528876734.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:54.896Z,1528876734.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:55.296Z,1528876735.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:55.696Z,1528876735.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:56.096Z,1528876736.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:56.495Z,1528876736.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:56.896Z,1528876736.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:57.296Z,1528876737.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:57.711Z,1528876737.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:58.100Z,1528876738.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:58.494Z,1528876738.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:58.898Z,1528876738.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:59.300Z,1528876739.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:58:59.694Z,1528876739.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:00.098Z,1528876740.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:00.498Z,1528876740.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:00.899Z,1528876740.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:01.298Z,1528876741.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:01.698Z,1528876741.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:02.098Z,1528876742.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:02.502Z,1528876742.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:02.898Z,1528876742.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:03.298Z,1528876743.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:03.698Z,1528876743.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:04.094Z,1528876744.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:04.498Z,1528876744.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:04.898Z,1528876744.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:05.294Z,1528876745.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:05.699Z,1528876745.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:06.098Z,1528876746.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:06.494Z,1528876746.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:06.899Z,1528876746.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:07.297Z,1528876747.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:07.698Z,1528876747.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:08.099Z,1528876748.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:08.504Z,1528876748.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:08.894Z,1528876748.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:09.298Z,1528876749.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:09.698Z,1528876749.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:10.094Z,1528876750.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:10.499Z,1528876750.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:10.898Z,1528876750.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:11.298Z,1528876751.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:11.699Z,1528876751.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:12.098Z,1528876752.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:12.504Z,1528876752.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:12.899Z,1528876752.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:13.298Z,1528876753.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:13.694Z,1528876753.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:14.098Z,1528876754.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:14.499Z,1528876754.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:14.894Z,1528876754.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:15.299Z,1528876755.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:15.698Z,1528876755.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:16.094Z,1528876756.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:16.498Z,1528876756.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:16.898Z,1528876756.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:17.295Z,1528876757.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:17.698Z,1528876757.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:18.099Z,1528876758.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:18.494Z,1528876758.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:18.898Z,1528876758.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:19.300Z,1528876759.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:19.700Z,1528876759.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:20.099Z,1528876760.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:20.499Z,1528876760.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:20.895Z,1528876760.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:21.299Z,1528876761.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:21.699Z,1528876761.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:22.102Z,1528876762.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:22.499Z,1528876762.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:22.899Z,1528876762.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:23.299Z,1528876763.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:23.696Z,1528876763.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:24.100Z,1528876764.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:24.499Z,1528876764.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:24.900Z,1528876764.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:25.299Z,1528876765.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:25.699Z,1528876765.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:26.095Z,1528876766.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:26.504Z,1528876766.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:26.896Z,1528876766.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:27.295Z,1528876767.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:27.700Z,1528876767.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:28.097Z,1528876768.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:28.499Z,1528876768.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:28.900Z,1528876768.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:29.298Z,1528876769.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:29.699Z,1528876769.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:30.099Z,1528876770.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:30.498Z,1528876770.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:30.895Z,1528876770.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:31.299Z,1528876771.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:31.699Z,1528876771.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:32.095Z,1528876772.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:32.500Z,1528876772.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:32.898Z,1528876772.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:33.295Z,1528876773.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:33.700Z,1528876773.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:34.099Z,1528876774.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:34.495Z,1528876774.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:34.904Z,1528876774.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:35.298Z,1528876775.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:35.700Z,1528876775.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:36.099Z,1528876776.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:36.498Z,1528876776.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:36.898Z,1528876776.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:37.304Z,1528876777.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:37.704Z,1528876777.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:38.094Z,1528876778.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:38.500Z,1528876778.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:38.898Z,1528876778.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:42.033Z,1528876782.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:42.183Z,1528876782.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:42.579Z,1528876782.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:42.967Z,1528876782.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:43.380Z,1528876783.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:43.755Z,1528876783.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:44.158Z,1528876784.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:44.564Z,1528876784.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:44.963Z,1528876784.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:45.358Z,1528876785.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:45.764Z,1528876785.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:46.159Z,1528876786.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:46.558Z,1528876786.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:46.964Z,1528876786.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:47.363Z,1528876787.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:47.763Z,1528876787.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:48.163Z,1528876788.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:48.559Z,1528876788.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:48.963Z,1528876788.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:49.364Z,1528876789.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:49.457Z,1528876789.457 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T07:59:49.457Z,1528876789.457 [NAL9602] No Fault, FailCount= 5
2018-06-13T07:59:49.726Z,1528876789.726 [NAL9602](INFO): Powering up NAL9602
2018-06-13T07:59:49.768Z,1528876789.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:50.157Z,1528876790.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:50.563Z,1528876790.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:50.962Z,1528876790.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:51.364Z,1528876791.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:51.763Z,1528876791.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:52.163Z,1528876792.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:52.559Z,1528876792.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:52.963Z,1528876792.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:53.362Z,1528876793.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:53.762Z,1528876793.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:54.168Z,1528876794.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:54.563Z,1528876794.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:54.963Z,1528876794.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:55.363Z,1528876795.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:55.762Z,1528876795.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:56.159Z,1528876796.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:56.563Z,1528876796.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:56.963Z,1528876796.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:57.358Z,1528876797.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:57.763Z,1528876797.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:58.163Z,1528876798.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:58.559Z,1528876798.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:58.968Z,1528876798.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:59.363Z,1528876799.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T07:59:59.763Z,1528876799.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:00.191Z,1528876800.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:00.529Z,1528876800.529 [NAL9602](INFO): NAL9602 initialized
2018-06-13T08:00:00.564Z,1528876800.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:00.972Z,1528876800.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:01.375Z,1528876801.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:01.775Z,1528876801.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:02.176Z,1528876802.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:02.568Z,1528876802.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:02.966Z,1528876802.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:03.362Z,1528876803.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:03.775Z,1528876803.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:04.175Z,1528876804.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:04.567Z,1528876804.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:04.967Z,1528876804.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:05.365Z,1528876805.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:05.768Z,1528876805.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:06.166Z,1528876806.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:06.572Z,1528876806.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:06.971Z,1528876806.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:07.375Z,1528876807.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:07.767Z,1528876807.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:08.164Z,1528876808.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:08.568Z,1528876808.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:08.970Z,1528876808.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:09.364Z,1528876809.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:09.780Z,1528876809.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:10.175Z,1528876810.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:10.571Z,1528876810.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:10.967Z,1528876810.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:11.366Z,1528876811.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:11.767Z,1528876811.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:12.166Z,1528876812.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:12.573Z,1528876812.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:12.975Z,1528876812.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:13.380Z,1528876813.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:13.765Z,1528876813.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:14.165Z,1528876814.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:14.567Z,1528876814.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:14.967Z,1528876814.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:15.366Z,1528876815.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:15.774Z,1528876815.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:16.175Z,1528876816.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:16.568Z,1528876816.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:16.976Z,1528876816.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:17.380Z,1528876817.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:17.763Z,1528876817.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:18.177Z,1528876818.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:18.577Z,1528876818.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:18.979Z,1528876818.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:19.391Z,1528876819.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:19.771Z,1528876819.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:20.168Z,1528876820.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:20.567Z,1528876820.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:20.972Z,1528876820.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:21.370Z,1528876821.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:21.780Z,1528876821.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:22.181Z,1528876822.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:22.577Z,1528876822.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:22.967Z,1528876822.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:23.367Z,1528876823.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:23.766Z,1528876823.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:24.176Z,1528876824.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:24.580Z,1528876824.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:24.976Z,1528876824.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:25.380Z,1528876825.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:25.767Z,1528876825.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:26.168Z,1528876826.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:26.567Z,1528876826.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:26.968Z,1528876826.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:27.364Z,1528876827.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:27.784Z,1528876827.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:28.180Z,1528876828.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:28.576Z,1528876828.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:28.979Z,1528876828.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:29.370Z,1528876829.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:29.767Z,1528876829.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:30.172Z,1528876830.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:30.576Z,1528876830.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:30.980Z,1528876830.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:31.384Z,1528876831.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:31.771Z,1528876831.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:32.167Z,1528876832.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:32.568Z,1528876832.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:32.971Z,1528876832.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:33.367Z,1528876833.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:33.788Z,1528876833.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:34.184Z,1528876834.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:34.577Z,1528876834.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:34.978Z,1528876834.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:35.379Z,1528876835.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:35.770Z,1528876835.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:36.176Z,1528876836.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:36.588Z,1528876836.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:36.980Z,1528876836.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:37.388Z,1528876837.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:37.771Z,1528876837.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:38.169Z,1528876838.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:38.581Z,1528876838.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:38.975Z,1528876838.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:42.075Z,1528876842.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:42.236Z,1528876842.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:42.635Z,1528876842.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:43.032Z,1528876843.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:43.424Z,1528876843.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:43.810Z,1528876843.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:44.201Z,1528876844.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:44.636Z,1528876844.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:45.032Z,1528876845.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:45.427Z,1528876845.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:45.816Z,1528876845.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:46.225Z,1528876846.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:46.600Z,1528876846.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:47.003Z,1528876847.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:47.412Z,1528876847.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:47.832Z,1528876847.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:48.219Z,1528876848.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:48.612Z,1528876848.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:49.004Z,1528876849.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:49.408Z,1528876849.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:49.810Z,1528876849.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:50.205Z,1528876850.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:50.612Z,1528876850.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:51.015Z,1528876851.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:51.416Z,1528876851.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:51.808Z,1528876851.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:52.211Z,1528876852.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:52.604Z,1528876852.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:53.018Z,1528876853.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:53.405Z,1528876853.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:53.816Z,1528876853.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:54.216Z,1528876854.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:54.620Z,1528876854.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:55.009Z,1528876855.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:55.409Z,1528876855.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:55.807Z,1528876855.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:56.204Z,1528876856.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:56.613Z,1528876856.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:57.021Z,1528876857.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:57.413Z,1528876857.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:57.809Z,1528876857.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:58.207Z,1528876858.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:58.608Z,1528876858.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:59.019Z,1528876859.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:59.406Z,1528876859.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:00:59.815Z,1528876859.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:00.219Z,1528876860.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:00.616Z,1528876860.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:01.004Z,1528876861.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:01.416Z,1528876861.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:01.812Z,1528876861.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:02.205Z,1528876862.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:02.616Z,1528876862.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:03.020Z,1528876863.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:03.417Z,1528876863.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:03.804Z,1528876863.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:04.207Z,1528876864.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:04.608Z,1528876864.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:05.007Z,1528876865.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:05.406Z,1528876865.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:05.818Z,1528876865.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:06.220Z,1528876866.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:06.620Z,1528876866.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:07.008Z,1528876867.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:07.408Z,1528876867.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:07.810Z,1528876867.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:08.208Z,1528876868.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:08.624Z,1528876868.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:09.024Z,1528876869.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:09.421Z,1528876869.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:09.807Z,1528876869.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:10.206Z,1528876870.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:10.615Z,1528876870.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:11.011Z,1528876871.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:11.416Z,1528876871.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:11.824Z,1528876871.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:12.227Z,1528876872.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:12.617Z,1528876872.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:13.012Z,1528876873.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:13.410Z,1528876873.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:13.812Z,1528876873.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:14.210Z,1528876874.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:14.624Z,1528876874.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:15.020Z,1528876875.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:15.422Z,1528876875.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:15.808Z,1528876875.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:16.211Z,1528876876.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:16.612Z,1528876876.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:17.017Z,1528876877.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:17.410Z,1528876877.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:17.824Z,1528876877.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:18.224Z,1528876878.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:18.617Z,1528876878.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:19.012Z,1528876879.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:19.411Z,1528876879.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:19.816Z,1528876879.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:20.220Z,1528876880.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:20.632Z,1528876880.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:21.022Z,1528876881.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:21.427Z,1528876881.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:21.813Z,1528876881.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:22.217Z,1528876882.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:22.612Z,1528876882.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:23.016Z,1528876883.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:23.416Z,1528876883.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:23.825Z,1528876883.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:24.223Z,1528876884.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:24.622Z,1528876884.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:25.016Z,1528876885.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:25.420Z,1528876885.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:25.832Z,1528876885.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:26.213Z,1528876886.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:26.632Z,1528876886.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:27.040Z,1528876887.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:27.424Z,1528876887.424 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:27.425Z,1528876887.425 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92
2018-06-13T08:01:27.425Z,1528876887.425 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:01:27.427Z,1528876887.427 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:27.427Z,1528876887.427 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92
2018-06-13T08:01:27.427Z,1528876887.427 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:01:27.428Z,1528876887.428 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:27.429Z,1528876887.429 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 92
2018-06-13T08:01:27.429Z,1528876887.429 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:01:27.506Z,1528876887.506 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:01:27.506Z,1528876887.506 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:01:27.506Z,1528876887.506 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:01:27.907Z,1528876887.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:01:27.907Z,1528876887.907 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92
2018-06-13T08:01:27.908Z,1528876887.908 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:01:27.908Z,1528876887.908 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92
2018-06-13T08:01:27.908Z,1528876887.908 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:01:27.908Z,1528876887.908 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 92
2018-06-13T08:01:28.220Z,1528876888.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:01:28.220Z,1528876888.220 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:01:28.220Z,1528876888.220 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:01:28.225Z,1528876888.225 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:01:28.225Z,1528876888.225 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:01:28.226Z,1528876888.226 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:01:28.226Z,1528876888.226 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:01:28.226Z,1528876888.226 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:01:28.227Z,1528876888.227 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:01:28.635Z,1528876888.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:01:28.636Z,1528876888.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:29.031Z,1528876889.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:01:29.032Z,1528876889.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:29.407Z,1528876889.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:01:29.408Z,1528876889.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:29.831Z,1528876889.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:01:29.832Z,1528876889.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:30.232Z,1528876890.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:01:30.233Z,1528876890.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:30.634Z,1528876890.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:01:30.635Z,1528876890.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:31.006Z,1528876891.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:01:31.007Z,1528876891.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:31.411Z,1528876891.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:01:31.412Z,1528876891.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:31.834Z,1528876891.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:01:31.835Z,1528876891.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:32.207Z,1528876892.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:01:32.208Z,1528876892.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:32.633Z,1528876892.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:01:32.634Z,1528876892.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:33.016Z,1528876893.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:01:33.017Z,1528876893.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:33.438Z,1528876893.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:01:33.439Z,1528876893.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:33.840Z,1528876893.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:01:33.841Z,1528876893.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:34.210Z,1528876894.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:01:34.211Z,1528876894.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:34.610Z,1528876894.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:01:34.611Z,1528876894.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:35.024Z,1528876895.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:01:35.024Z,1528876895.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:35.412Z,1528876895.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:01:35.413Z,1528876895.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:35.815Z,1528876895.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:01:35.816Z,1528876895.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:36.217Z,1528876896.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:01:36.218Z,1528876896.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:36.641Z,1528876896.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:01:36.642Z,1528876896.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:37.012Z,1528876897.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:01:37.013Z,1528876897.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:37.420Z,1528876897.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:01:37.426Z,1528876897.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:37.811Z,1528876897.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:01:37.812Z,1528876897.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:38.223Z,1528876898.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:01:38.224Z,1528876898.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:38.621Z,1528876898.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:01:38.622Z,1528876898.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:39.022Z,1528876899.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:01:39.023Z,1528876899.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:39.422Z,1528876899.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:01:39.423Z,1528876899.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:39.825Z,1528876899.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:01:39.826Z,1528876899.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:40.213Z,1528876900.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:01:40.214Z,1528876900.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:40.609Z,1528876900.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:01:40.610Z,1528876900.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:41.011Z,1528876901.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:01:41.012Z,1528876901.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:41.426Z,1528876901.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:01:41.427Z,1528876901.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:41.824Z,1528876901.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:01:41.825Z,1528876901.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:44.952Z,1528876904.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T08:01:44.953Z,1528876904.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:45.102Z,1528876905.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T08:01:45.103Z,1528876905.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:45.500Z,1528876905.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T08:01:45.506Z,1528876905.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:45.902Z,1528876905.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T08:01:45.902Z,1528876905.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:46.283Z,1528876906.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T08:01:46.284Z,1528876906.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:46.709Z,1528876906.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T08:01:46.710Z,1528876906.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:47.110Z,1528876907.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T08:01:47.111Z,1528876907.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:47.508Z,1528876907.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:47.884Z,1528876907.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:48.281Z,1528876908.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:48.680Z,1528876908.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:49.088Z,1528876909.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:49.486Z,1528876909.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:49.907Z,1528876909.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:50.313Z,1528876910.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:50.692Z,1528876910.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:51.083Z,1528876911.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:51.483Z,1528876911.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:51.879Z,1528876911.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:52.281Z,1528876912.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:52.720Z,1528876912.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:53.091Z,1528876913.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:53.486Z,1528876913.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:53.882Z,1528876913.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:54.288Z,1528876914.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:54.683Z,1528876914.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:55.082Z,1528876915.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:55.481Z,1528876915.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:55.891Z,1528876915.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:56.319Z,1528876916.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:56.687Z,1528876916.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:57.081Z,1528876917.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:57.483Z,1528876917.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:57.888Z,1528876917.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:58.282Z,1528876918.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:58.696Z,1528876918.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:59.087Z,1528876919.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:59.495Z,1528876919.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:01:59.886Z,1528876919.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:00.282Z,1528876920.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:00.686Z,1528876920.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:01.092Z,1528876921.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:01.486Z,1528876921.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:01.892Z,1528876921.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:02.372Z,1528876922.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:02.691Z,1528876922.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:03.086Z,1528876923.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:03.482Z,1528876923.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:03.887Z,1528876923.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:04.287Z,1528876924.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:04.694Z,1528876924.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:05.092Z,1528876925.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:05.496Z,1528876925.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:05.888Z,1528876925.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:06.286Z,1528876926.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:06.686Z,1528876926.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:07.094Z,1528876927.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:07.486Z,1528876927.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:07.892Z,1528876927.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:08.316Z,1528876928.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:08.696Z,1528876928.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:09.097Z,1528876929.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:09.488Z,1528876929.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:09.889Z,1528876929.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:10.287Z,1528876930.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:10.700Z,1528876930.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:11.096Z,1528876931.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:11.496Z,1528876931.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:11.896Z,1528876931.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:12.292Z,1528876932.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:12.687Z,1528876932.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:13.092Z,1528876933.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:13.487Z,1528876933.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:13.904Z,1528876933.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:14.300Z,1528876934.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:14.696Z,1528876934.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:15.090Z,1528876935.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:15.499Z,1528876935.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:15.892Z,1528876935.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:16.285Z,1528876936.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:16.702Z,1528876936.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:17.100Z,1528876937.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:17.499Z,1528876937.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:17.895Z,1528876937.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:18.295Z,1528876938.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:18.692Z,1528876938.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:19.091Z,1528876939.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:19.493Z,1528876939.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:19.901Z,1528876939.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:20.302Z,1528876940.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:20.698Z,1528876940.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:21.088Z,1528876941.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:21.496Z,1528876941.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:21.897Z,1528876941.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:22.294Z,1528876942.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:22.699Z,1528876942.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:23.111Z,1528876943.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:23.509Z,1528876943.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:23.895Z,1528876943.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:24.296Z,1528876944.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:24.700Z,1528876944.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:25.103Z,1528876945.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:25.502Z,1528876945.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:25.906Z,1528876945.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:26.317Z,1528876946.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:26.702Z,1528876946.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:27.104Z,1528876947.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:27.504Z,1528876947.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:27.911Z,1528876947.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:28.279Z,1528876948.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:28.705Z,1528876948.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:29.106Z,1528876949.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:29.511Z,1528876949.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:29.901Z,1528876949.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:30.281Z,1528876950.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:30.684Z,1528876950.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:31.115Z,1528876951.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:31.481Z,1528876951.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:31.908Z,1528876951.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:32.313Z,1528876952.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:32.720Z,1528876952.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:33.080Z,1528876953.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:33.487Z,1528876953.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:33.886Z,1528876953.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:34.312Z,1528876954.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:34.696Z,1528876954.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:35.096Z,1528876955.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:35.496Z,1528876955.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:35.916Z,1528876955.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:36.281Z,1528876956.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:36.687Z,1528876956.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:37.089Z,1528876957.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:37.496Z,1528876957.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:37.888Z,1528876957.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:38.296Z,1528876958.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:38.714Z,1528876958.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:39.120Z,1528876959.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:42.201Z,1528876962.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:42.370Z,1528876962.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:42.792Z,1528876962.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:43.187Z,1528876963.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:43.578Z,1528876963.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:43.978Z,1528876963.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:44.377Z,1528876964.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:44.780Z,1528876964.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:45.164Z,1528876965.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:45.565Z,1528876965.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:45.991Z,1528876965.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:46.396Z,1528876966.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:46.775Z,1528876966.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:47.165Z,1528876967.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:47.572Z,1528876967.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:47.978Z,1528876967.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:48.364Z,1528876968.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:48.775Z,1528876968.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:49.175Z,1528876969.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:49.571Z,1528876969.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:49.967Z,1528876969.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:50.371Z,1528876970.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:50.768Z,1528876970.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:51.167Z,1528876971.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:51.579Z,1528876971.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:51.975Z,1528876971.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:52.378Z,1528876972.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:52.776Z,1528876972.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:53.172Z,1528876973.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:53.570Z,1528876973.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:53.972Z,1528876973.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:54.366Z,1528876974.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:54.772Z,1528876974.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:55.175Z,1528876975.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:55.579Z,1528876975.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:55.972Z,1528876975.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:56.367Z,1528876976.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:56.769Z,1528876976.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:57.170Z,1528876977.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:57.572Z,1528876977.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:57.972Z,1528876977.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:58.375Z,1528876978.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:58.775Z,1528876978.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:59.170Z,1528876979.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:59.568Z,1528876979.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:02:59.984Z,1528876979.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:00.367Z,1528876980.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:00.776Z,1528876980.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:01.176Z,1528876981.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:01.584Z,1528876981.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:01.970Z,1528876981.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:02.373Z,1528876982.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:02.770Z,1528876982.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:03.173Z,1528876983.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:03.574Z,1528876983.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:03.992Z,1528876983.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:04.385Z,1528876984.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:04.788Z,1528876984.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:05.169Z,1528876985.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:05.576Z,1528876985.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:05.976Z,1528876985.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:06.376Z,1528876986.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:06.781Z,1528876986.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:07.192Z,1528876987.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:07.582Z,1528876987.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:07.978Z,1528876987.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:08.378Z,1528876988.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:08.772Z,1528876988.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:09.181Z,1528876989.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:09.589Z,1528876989.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:09.989Z,1528876989.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:10.383Z,1528876990.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:10.792Z,1528876990.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:11.187Z,1528876991.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:11.581Z,1528876991.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:11.985Z,1528876991.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:12.375Z,1528876992.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:12.783Z,1528876992.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:13.196Z,1528876993.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:13.589Z,1528876993.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:13.981Z,1528876993.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:14.396Z,1528876994.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:14.785Z,1528876994.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:15.165Z,1528876995.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:15.568Z,1528876995.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:15.991Z,1528876995.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:16.390Z,1528876996.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:16.789Z,1528876996.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:17.166Z,1528876997.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:17.595Z,1528876997.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:17.974Z,1528876997.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:18.368Z,1528876998.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:18.780Z,1528876998.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:19.200Z,1528876999.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:19.599Z,1528876999.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:19.972Z,1528876999.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:20.381Z,1528877000.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:20.784Z,1528877000.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:21.172Z,1528877001.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:21.577Z,1528877001.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:21.993Z,1528877001.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:22.400Z,1528877002.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:22.818Z,1528877002.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:23.174Z,1528877003.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:23.573Z,1528877003.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:23.988Z,1528877003.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:24.376Z,1528877004.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:24.782Z,1528877004.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:25.197Z,1528877005.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:25.596Z,1528877005.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:25.973Z,1528877005.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:26.381Z,1528877006.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:26.775Z,1528877006.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:27.173Z,1528877007.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:27.590Z,1528877007.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:27.983Z,1528877007.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:28.384Z,1528877008.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:28.804Z,1528877008.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:29.156Z,1528877009.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:29.563Z,1528877009.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:29.986Z,1528877009.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:30.393Z,1528877010.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:30.792Z,1528877010.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:31.199Z,1528877011.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:31.598Z,1528877011.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:31.000Z,1528877012.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:32.368Z,1528877012.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:32.764Z,1528877012.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:33.173Z,1528877013.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:33.567Z,1528877013.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:33.971Z,1528877013.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:34.393Z,1528877014.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:34.780Z,1528877014.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:35.200Z,1528877015.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:35.566Z,1528877015.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:35.992Z,1528877015.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:36.370Z,1528877016.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:36.772Z,1528877016.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:37.175Z,1528877017.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:37.573Z,1528877017.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:37.973Z,1528877017.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:38.379Z,1528877018.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:38.782Z,1528877018.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:39.185Z,1528877019.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:42.313Z,1528877022.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:42.317Z,1528877022.317 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T07:58:41.0Z
2018-06-13T08:03:42.317Z,1528877022.317 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T08:03:42.317Z,1528877022.317 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T08:03:42.450Z,1528877022.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:43.612Z,1528877023.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:43.762Z,1528877023.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:44.169Z,1528877024.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:44.570Z,1528877024.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:44.972Z,1528877024.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:45.364Z,1528877025.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:45.774Z,1528877025.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:48.887Z,1528877028.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:48.985Z,1528877028.985 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180613T032335/Courier0108.lzma
2018-06-13T08:03:49.067Z,1528877029.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:49.439Z,1528877029.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:49.786Z,1528877029.786 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0108.lzma.bak
2018-06-13T08:03:49.786Z,1528877029.786 [DataOverHttps](INFO): SBD MOMSN=8328862
2018-06-13T08:03:49.865Z,1528877029.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:51.747Z,1528877031.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:51.924Z,1528877031.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:52.317Z,1528877032.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:55.441Z,1528877035.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:55.579Z,1528877035.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:55.988Z,1528877035.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:56.389Z,1528877036.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:56.780Z,1528877036.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:03:57.176Z,1528877037.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:00.288Z,1528877040.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:00.369Z,1528877040.369 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0109.lzma
2018-06-13T08:04:00.430Z,1528877040.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:00.849Z,1528877040.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:01.170Z,1528877041.170 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0109.lzma.bak
2018-06-13T08:04:01.171Z,1528877041.171 [DataOverHttps](INFO): SBD MOMSN=8328865
2018-06-13T08:04:01.249Z,1528877041.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:03.126Z,1528877043.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:03.130Z,1528877043.130 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T08:04:03.130Z,1528877043.130 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T08:04:03.130Z,1528877043.130 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T08:04:03.274Z,1528877043.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:06.383Z,1528877046.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:06.535Z,1528877046.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:06.940Z,1528877046.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:07.340Z,1528877047.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:07.733Z,1528877047.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:08.128Z,1528877048.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:08.508Z,1528877048.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:08.932Z,1528877048.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:09.336Z,1528877049.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:09.713Z,1528877049.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:10.143Z,1528877050.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:10.542Z,1528877050.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:10.926Z,1528877050.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:11.315Z,1528877051.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:11.720Z,1528877051.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:12.123Z,1528877052.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:12.525Z,1528877052.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:12.929Z,1528877052.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:13.340Z,1528877053.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:13.732Z,1528877053.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:14.132Z,1528877054.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:14.516Z,1528877054.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:14.912Z,1528877054.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:15.313Z,1528877055.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:15.712Z,1528877055.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:16.133Z,1528877056.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:16.634Z,1528877056.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:16.969Z,1528877056.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:17.390Z,1528877057.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:17.750Z,1528877057.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:18.247Z,1528877058.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:18.579Z,1528877058.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:18.935Z,1528877058.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:19.341Z,1528877059.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:19.742Z,1528877059.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:20.120Z,1528877060.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:20.515Z,1528877060.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:20.915Z,1528877060.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:21.316Z,1528877061.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:21.715Z,1528877061.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:22.147Z,1528877062.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:22.526Z,1528877062.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:22.926Z,1528877062.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:23.320Z,1528877063.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:23.720Z,1528877063.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:24.119Z,1528877064.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:24.518Z,1528877064.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:24.947Z,1528877064.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:25.322Z,1528877065.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:25.723Z,1528877065.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:26.124Z,1528877066.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:26.518Z,1528877066.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:26.918Z,1528877066.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:27.318Z,1528877067.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:27.717Z,1528877067.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:28.128Z,1528877068.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:28.530Z,1528877068.530 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:28.530Z,1528877068.530 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93
2018-06-13T08:04:28.531Z,1528877068.531 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:04:28.532Z,1528877068.532 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:28.532Z,1528877068.532 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93
2018-06-13T08:04:28.532Z,1528877068.532 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:04:28.554Z,1528877068.554 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:28.554Z,1528877068.554 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 93
2018-06-13T08:04:28.555Z,1528877068.555 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:04:28.629Z,1528877068.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:04:28.629Z,1528877068.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:04:28.630Z,1528877068.630 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:04:29.041Z,1528877069.041 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:04:29.041Z,1528877069.041 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93
2018-06-13T08:04:29.042Z,1528877069.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:04:29.042Z,1528877069.042 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93
2018-06-13T08:04:29.042Z,1528877069.042 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:04:29.042Z,1528877069.042 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 93
2018-06-13T08:04:29.319Z,1528877069.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:04:29.319Z,1528877069.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:04:29.320Z,1528877069.320 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:04:29.320Z,1528877069.320 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:04:29.321Z,1528877069.321 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:04:29.321Z,1528877069.321 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:04:29.321Z,1528877069.321 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:04:29.322Z,1528877069.322 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:04:29.322Z,1528877069.322 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:04:29.725Z,1528877069.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:04:29.726Z,1528877069.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:30.123Z,1528877070.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:04:30.124Z,1528877070.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:30.519Z,1528877070.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:04:30.520Z,1528877070.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:30.928Z,1528877070.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:04:30.930Z,1528877070.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:31.328Z,1528877071.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:04:31.329Z,1528877071.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:31.732Z,1528877071.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:04:31.733Z,1528877071.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:32.119Z,1528877072.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:04:32.120Z,1528877072.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:32.522Z,1528877072.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:04:32.522Z,1528877072.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:32.924Z,1528877072.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:04:32.926Z,1528877072.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:33.323Z,1528877073.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:04:33.324Z,1528877073.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:33.722Z,1528877073.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:04:33.723Z,1528877073.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:34.132Z,1528877074.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:04:34.133Z,1528877074.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:34.532Z,1528877074.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:04:34.532Z,1528877074.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:34.935Z,1528877074.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:04:34.936Z,1528877074.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:35.320Z,1528877075.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:04:35.322Z,1528877075.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:35.728Z,1528877075.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:04:35.729Z,1528877075.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:36.123Z,1528877076.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:04:36.124Z,1528877076.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:36.521Z,1528877076.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:04:36.522Z,1528877076.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:36.932Z,1528877076.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:04:36.933Z,1528877076.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:37.334Z,1528877077.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:04:37.335Z,1528877077.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:37.732Z,1528877077.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:04:37.733Z,1528877077.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:38.123Z,1528877078.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:04:38.124Z,1528877078.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:38.528Z,1528877078.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:04:38.529Z,1528877078.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:38.920Z,1528877078.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:04:38.921Z,1528877078.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:39.323Z,1528877079.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:04:39.324Z,1528877079.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:39.727Z,1528877079.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:04:39.728Z,1528877079.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:40.135Z,1528877080.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:04:40.136Z,1528877080.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:40.537Z,1528877080.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:04:40.538Z,1528877080.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:40.935Z,1528877080.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:04:40.936Z,1528877080.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:41.319Z,1528877081.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:04:41.320Z,1528877081.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:41.728Z,1528877081.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:04:41.729Z,1528877081.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:42.124Z,1528877082.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:04:42.125Z,1528877082.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:42.526Z,1528877082.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:04:42.527Z,1528877082.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:42.936Z,1528877082.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:04:42.937Z,1528877082.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:43.334Z,1528877083.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:04:43.335Z,1528877083.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:43.729Z,1528877083.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:04:43.730Z,1528877083.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:44.136Z,1528877084.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:04:44.137Z,1528877084.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:44.523Z,1528877084.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:04:44.524Z,1528877084.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:44.924Z,1528877084.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T08:04:44.925Z,1528877084.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:45.325Z,1528877085.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T08:04:45.326Z,1528877085.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:45.728Z,1528877085.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T08:04:45.729Z,1528877085.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:46.138Z,1528877086.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T08:04:46.138Z,1528877086.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:46.534Z,1528877086.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T08:04:46.535Z,1528877086.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:46.933Z,1528877086.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T08:04:46.934Z,1528877086.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:47.328Z,1528877087.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T08:04:47.329Z,1528877087.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:47.744Z,1528877087.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T08:04:47.745Z,1528877087.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:48.125Z,1528877088.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T08:04:48.126Z,1528877088.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:48.523Z,1528877088.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T08:04:48.524Z,1528877088.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:48.934Z,1528877088.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:49.337Z,1528877089.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:49.730Z,1528877089.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:50.119Z,1528877090.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:50.532Z,1528877090.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:50.936Z,1528877090.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:51.340Z,1528877091.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:51.725Z,1528877091.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:52.136Z,1528877092.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:52.542Z,1528877092.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:52.945Z,1528877092.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:53.319Z,1528877093.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:53.744Z,1528877093.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:54.128Z,1528877094.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:54.536Z,1528877094.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:54.929Z,1528877094.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:55.343Z,1528877095.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:55.733Z,1528877095.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:56.135Z,1528877096.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:56.521Z,1528877096.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:56.940Z,1528877096.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:57.343Z,1528877097.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:57.744Z,1528877097.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:58.127Z,1528877098.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:58.537Z,1528877098.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:58.946Z,1528877098.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:59.328Z,1528877099.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:04:59.740Z,1528877099.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:00.135Z,1528877100.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:00.528Z,1528877100.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:00.934Z,1528877100.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:01.331Z,1528877101.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:01.763Z,1528877101.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:02.136Z,1528877102.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:02.536Z,1528877102.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:02.922Z,1528877102.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:03.341Z,1528877103.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:03.732Z,1528877103.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:04.138Z,1528877104.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:04.544Z,1528877104.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:04.970Z,1528877104.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:08.051Z,1528877108.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:08.221Z,1528877108.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:08.630Z,1528877108.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:09.028Z,1528877109.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:09.428Z,1528877109.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:09.802Z,1528877109.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:10.195Z,1528877110.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:10.600Z,1528877110.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:11.032Z,1528877111.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:11.428Z,1528877111.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:11.828Z,1528877111.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:12.200Z,1528877112.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:12.596Z,1528877112.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:12.000Z,1528877113.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:13.401Z,1528877113.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:13.796Z,1528877113.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:14.228Z,1528877114.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:14.630Z,1528877114.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:15.028Z,1528877115.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:15.400Z,1528877115.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:15.800Z,1528877115.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:16.200Z,1528877116.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:16.605Z,1528877116.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:17.031Z,1528877117.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:17.428Z,1528877117.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:17.829Z,1528877117.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:18.205Z,1528877118.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:18.602Z,1528877118.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:19.000Z,1528877119.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:19.406Z,1528877119.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:19.801Z,1528877119.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:20.228Z,1528877120.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:20.631Z,1528877120.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:21.029Z,1528877121.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:21.405Z,1528877121.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:21.805Z,1528877121.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:22.203Z,1528877122.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:22.605Z,1528877122.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:23.031Z,1528877123.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:23.430Z,1528877123.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:23.828Z,1528877123.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:24.206Z,1528877124.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:24.601Z,1528877124.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:25.003Z,1528877125.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:25.418Z,1528877125.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:25.806Z,1528877125.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:26.210Z,1528877126.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:26.613Z,1528877126.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:27.010Z,1528877127.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:27.407Z,1528877127.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:27.808Z,1528877127.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:28.205Z,1528877128.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:28.612Z,1528877128.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:29.016Z,1528877129.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:29.415Z,1528877129.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:29.820Z,1528877129.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:30.219Z,1528877130.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:30.607Z,1528877130.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:31.008Z,1528877131.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:31.409Z,1528877131.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:31.805Z,1528877131.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:32.232Z,1528877132.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:32.617Z,1528877132.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:33.020Z,1528877133.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:33.404Z,1528877133.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:33.818Z,1528877133.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:34.208Z,1528877134.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:34.614Z,1528877134.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:35.019Z,1528877135.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:35.423Z,1528877135.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:35.820Z,1528877135.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:36.217Z,1528877136.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:36.614Z,1528877136.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:37.019Z,1528877137.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:37.417Z,1528877137.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:37.815Z,1528877137.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:38.224Z,1528877138.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:38.624Z,1528877138.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:39.021Z,1528877139.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:39.415Z,1528877139.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:39.818Z,1528877139.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:40.226Z,1528877140.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:40.602Z,1528877140.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:41.031Z,1528877141.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:41.428Z,1528877141.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:41.829Z,1528877141.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:42.203Z,1528877142.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:42.599Z,1528877142.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:43.001Z,1528877143.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:43.431Z,1528877143.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:43.825Z,1528877143.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:44.228Z,1528877144.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:44.632Z,1528877144.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:45.028Z,1528877145.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:45.404Z,1528877145.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:45.803Z,1528877145.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:46.204Z,1528877146.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:46.624Z,1528877146.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:47.030Z,1528877147.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:47.428Z,1528877147.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:47.829Z,1528877147.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:48.232Z,1528877148.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:48.622Z,1528877148.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:49.031Z,1528877149.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:49.406Z,1528877149.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:49.824Z,1528877149.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:50.229Z,1528877150.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:50.635Z,1528877150.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:51.028Z,1528877151.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:51.431Z,1528877151.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:51.805Z,1528877151.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:52.206Z,1528877152.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:52.603Z,1528877152.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:53.032Z,1528877153.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:53.432Z,1528877153.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:53.829Z,1528877153.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:54.208Z,1528877154.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:54.627Z,1528877154.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:55.005Z,1528877155.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:55.405Z,1528877155.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:55.801Z,1528877155.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:56.236Z,1528877156.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:56.632Z,1528877156.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:57.012Z,1528877157.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:57.405Z,1528877157.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:57.833Z,1528877157.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:58.211Z,1528877158.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:58.608Z,1528877158.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:59.014Z,1528877159.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:59.432Z,1528877159.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:05:59.813Z,1528877159.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:00.210Z,1528877160.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:00.605Z,1528877160.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:01.036Z,1528877161.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:01.414Z,1528877161.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:01.807Z,1528877161.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:02.218Z,1528877162.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:02.640Z,1528877162.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:03.019Z,1528877163.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:03.413Z,1528877163.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:03.813Z,1528877163.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:06.911Z,1528877166.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:07.052Z,1528877167.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:07.459Z,1528877167.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:07.871Z,1528877167.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:08.260Z,1528877168.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:08.652Z,1528877168.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:09.067Z,1528877169.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:09.454Z,1528877169.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:09.835Z,1528877169.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:10.261Z,1528877170.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:10.661Z,1528877170.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:11.064Z,1528877171.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:11.436Z,1528877171.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:11.855Z,1528877171.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:12.247Z,1528877172.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:12.640Z,1528877172.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:13.057Z,1528877173.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:13.447Z,1528877173.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:13.867Z,1528877173.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:14.244Z,1528877174.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:14.643Z,1528877174.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:15.038Z,1528877175.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:15.466Z,1528877175.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:15.845Z,1528877175.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:16.247Z,1528877176.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:16.649Z,1528877176.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:17.067Z,1528877177.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:17.442Z,1528877177.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:17.842Z,1528877177.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:18.245Z,1528877178.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:18.670Z,1528877178.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:19.051Z,1528877179.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:19.449Z,1528877179.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:19.852Z,1528877179.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:20.272Z,1528877180.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:20.646Z,1528877180.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:21.040Z,1528877181.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:21.443Z,1528877181.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:21.855Z,1528877181.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:22.252Z,1528877182.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:22.651Z,1528877182.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:23.050Z,1528877183.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:23.472Z,1528877183.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:23.840Z,1528877183.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:24.246Z,1528877184.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:24.644Z,1528877184.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:25.071Z,1528877185.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:25.453Z,1528877185.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:25.851Z,1528877185.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:26.244Z,1528877186.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:26.648Z,1528877186.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:27.040Z,1528877187.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:27.454Z,1528877187.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:27.844Z,1528877187.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:28.248Z,1528877188.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:28.652Z,1528877188.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:29.060Z,1528877189.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:29.445Z,1528877189.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:29.841Z,1528877189.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:30.257Z,1528877190.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:30.644Z,1528877190.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:31.060Z,1528877191.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:31.490Z,1528877191.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:31.857Z,1528877191.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:32.249Z,1528877192.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:32.649Z,1528877192.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:33.045Z,1528877193.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:33.442Z,1528877193.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:33.843Z,1528877193.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:34.264Z,1528877194.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:34.688Z,1528877194.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:35.065Z,1528877195.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:35.441Z,1528877195.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:35.853Z,1528877195.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:36.245Z,1528877196.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:36.646Z,1528877196.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:37.059Z,1528877197.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:37.462Z,1528877197.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:37.890Z,1528877197.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:38.246Z,1528877198.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:38.647Z,1528877198.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:39.059Z,1528877199.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:39.453Z,1528877199.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:39.857Z,1528877199.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:40.245Z,1528877200.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:40.656Z,1528877200.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:41.057Z,1528877201.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:41.453Z,1528877201.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:41.854Z,1528877201.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:42.246Z,1528877202.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:42.651Z,1528877202.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:43.060Z,1528877203.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:43.458Z,1528877203.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:43.863Z,1528877203.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:44.249Z,1528877204.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:44.646Z,1528877204.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:45.048Z,1528877205.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:45.459Z,1528877205.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:45.858Z,1528877205.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:46.243Z,1528877206.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:46.645Z,1528877206.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:47.065Z,1528877207.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:47.451Z,1528877207.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:47.855Z,1528877207.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:48.253Z,1528877208.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:48.648Z,1528877208.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:49.054Z,1528877209.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:49.455Z,1528877209.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:49.856Z,1528877209.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:50.249Z,1528877210.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:50.659Z,1528877210.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:51.055Z,1528877211.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:51.460Z,1528877211.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:51.872Z,1528877211.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:52.252Z,1528877212.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:52.652Z,1528877212.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:53.067Z,1528877213.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:53.460Z,1528877213.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:53.860Z,1528877213.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:54.256Z,1528877214.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:54.653Z,1528877214.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:55.056Z,1528877215.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:55.459Z,1528877215.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:55.863Z,1528877215.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:56.234Z,1528877216.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:56.636Z,1528877216.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:57.039Z,1528877217.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:57.464Z,1528877217.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:57.863Z,1528877217.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:58.244Z,1528877218.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:58.638Z,1528877218.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:59.047Z,1528877219.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:59.448Z,1528877219.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:06:59.847Z,1528877219.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:00.247Z,1528877220.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:00.635Z,1528877220.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:01.052Z,1528877221.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:01.448Z,1528877221.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:01.845Z,1528877221.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:02.247Z,1528877222.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:02.652Z,1528877222.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:03.046Z,1528877223.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:03.452Z,1528877223.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:03.855Z,1528877223.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:06.956Z,1528877226.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:07.130Z,1528877227.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:07.513Z,1528877227.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:07.909Z,1528877227.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:08.333Z,1528877228.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:08.706Z,1528877228.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:09.098Z,1528877229.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:09.495Z,1528877229.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:09.905Z,1528877229.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:10.303Z,1528877230.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:10.709Z,1528877230.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:11.121Z,1528877231.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:11.508Z,1528877231.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:11.906Z,1528877231.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:12.294Z,1528877232.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:12.684Z,1528877232.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:13.111Z,1528877233.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:13.513Z,1528877233.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:13.917Z,1528877233.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:14.292Z,1528877234.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:14.696Z,1528877234.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:15.099Z,1528877235.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:15.498Z,1528877235.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:15.902Z,1528877235.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:16.286Z,1528877236.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:16.691Z,1528877236.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:17.099Z,1528877237.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:17.500Z,1528877237.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:17.896Z,1528877237.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:18.292Z,1528877238.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:18.687Z,1528877238.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:19.096Z,1528877239.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:19.499Z,1528877239.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:19.899Z,1528877239.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:20.291Z,1528877240.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:20.698Z,1528877240.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:21.099Z,1528877241.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:21.504Z,1528877241.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:21.900Z,1528877241.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:22.296Z,1528877242.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:22.693Z,1528877242.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:23.105Z,1528877243.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:23.502Z,1528877243.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:23.900Z,1528877243.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:24.293Z,1528877244.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:24.692Z,1528877244.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:25.101Z,1528877245.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:25.504Z,1528877245.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:25.901Z,1528877245.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:26.294Z,1528877246.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:26.700Z,1528877246.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:27.102Z,1528877247.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:27.506Z,1528877247.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:27.916Z,1528877247.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:28.294Z,1528877248.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:28.701Z,1528877248.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:29.107Z,1528877249.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:29.512Z,1528877249.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:29.512Z,1528877249.512 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94
2018-06-13T08:07:29.512Z,1528877249.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:07:29.514Z,1528877249.514 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:29.514Z,1528877249.514 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94
2018-06-13T08:07:29.514Z,1528877249.514 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:07:29.516Z,1528877249.516 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:29.516Z,1528877249.516 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 94
2018-06-13T08:07:29.516Z,1528877249.516 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:07:29.613Z,1528877249.613 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:07:29.613Z,1528877249.613 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:07:29.614Z,1528877249.614 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:07:29.985Z,1528877249.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:07:29.985Z,1528877249.985 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94
2018-06-13T08:07:29.986Z,1528877249.986 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:07:29.986Z,1528877249.986 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94
2018-06-13T08:07:29.986Z,1528877249.986 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:07:29.986Z,1528877249.986 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 94
2018-06-13T08:07:30.307Z,1528877250.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:07:30.307Z,1528877250.307 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:07:30.308Z,1528877250.308 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:07:30.308Z,1528877250.308 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:07:30.309Z,1528877250.309 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:07:30.309Z,1528877250.309 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:07:30.309Z,1528877250.309 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:07:30.310Z,1528877250.310 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:07:30.310Z,1528877250.310 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:07:30.687Z,1528877250.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:07:30.688Z,1528877250.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:31.114Z,1528877251.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:07:31.115Z,1528877251.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:31.519Z,1528877251.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:07:31.520Z,1528877251.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:31.895Z,1528877251.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:07:31.896Z,1528877251.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:32.295Z,1528877252.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:07:32.296Z,1528877252.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:32.696Z,1528877252.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:07:32.697Z,1528877252.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:33.095Z,1528877253.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:07:33.095Z,1528877253.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:33.502Z,1528877253.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:07:33.503Z,1528877253.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:33.900Z,1528877253.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:07:33.902Z,1528877253.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:34.295Z,1528877254.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:07:34.296Z,1528877254.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:34.692Z,1528877254.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:07:34.693Z,1528877254.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:35.102Z,1528877255.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:07:35.103Z,1528877255.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:35.501Z,1528877255.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:07:35.502Z,1528877255.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:35.900Z,1528877255.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:07:35.901Z,1528877255.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:36.294Z,1528877256.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:07:36.295Z,1528877256.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:36.692Z,1528877256.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:07:36.693Z,1528877256.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:37.107Z,1528877257.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:07:37.108Z,1528877257.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:37.505Z,1528877257.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:07:37.506Z,1528877257.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:37.898Z,1528877257.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:07:37.899Z,1528877257.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:38.292Z,1528877258.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:07:38.293Z,1528877258.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:38.705Z,1528877258.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:07:38.706Z,1528877258.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:39.102Z,1528877259.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:07:39.103Z,1528877259.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:39.515Z,1528877259.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:07:39.515Z,1528877259.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:39.906Z,1528877259.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:07:39.907Z,1528877259.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:40.304Z,1528877260.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:07:40.305Z,1528877260.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:40.701Z,1528877260.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:07:40.702Z,1528877260.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:41.112Z,1528877261.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:07:41.113Z,1528877261.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:41.502Z,1528877261.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:07:41.503Z,1528877261.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:41.905Z,1528877261.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:07:41.906Z,1528877261.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:42.302Z,1528877262.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:07:42.303Z,1528877262.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:42.680Z,1528877262.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:07:42.681Z,1528877262.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:43.110Z,1528877263.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:07:43.111Z,1528877263.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:43.508Z,1528877263.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:07:43.510Z,1528877263.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:43.903Z,1528877263.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:07:43.904Z,1528877263.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:44.288Z,1528877264.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:07:44.289Z,1528877264.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:44.688Z,1528877264.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:07:44.689Z,1528877264.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:45.110Z,1528877265.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:07:45.111Z,1528877265.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:45.514Z,1528877265.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:07:45.515Z,1528877265.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:45.920Z,1528877265.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T08:07:45.925Z,1528877265.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:46.289Z,1528877266.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T08:07:46.290Z,1528877266.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:46.691Z,1528877266.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T08:07:46.692Z,1528877266.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:47.090Z,1528877267.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T08:07:47.091Z,1528877267.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:47.496Z,1528877267.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T08:07:47.497Z,1528877267.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:47.898Z,1528877267.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T08:07:47.899Z,1528877267.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:48.299Z,1528877268.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T08:07:48.300Z,1528877268.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:48.688Z,1528877268.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T08:07:48.690Z,1528877268.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:49.089Z,1528877269.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T08:07:49.090Z,1528877269.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:49.491Z,1528877269.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T08:07:49.492Z,1528877269.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:49.888Z,1528877269.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:50.295Z,1528877270.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:50.700Z,1528877270.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:51.095Z,1528877271.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:51.490Z,1528877271.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:51.891Z,1528877271.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:52.288Z,1528877272.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:52.690Z,1528877272.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:53.091Z,1528877273.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:53.499Z,1528877273.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:53.898Z,1528877273.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:54.299Z,1528877274.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:54.687Z,1528877274.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:55.089Z,1528877275.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:55.496Z,1528877275.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:55.887Z,1528877275.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:56.295Z,1528877276.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:56.699Z,1528877276.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:57.096Z,1528877277.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:57.490Z,1528877277.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:57.891Z,1528877277.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:58.287Z,1528877278.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:58.689Z,1528877278.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:59.091Z,1528877279.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:59.496Z,1528877279.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:07:59.899Z,1528877279.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:00.304Z,1528877280.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:00.725Z,1528877280.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:01.091Z,1528877281.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:01.498Z,1528877281.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:01.888Z,1528877281.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:02.317Z,1528877282.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:02.700Z,1528877282.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:03.104Z,1528877283.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:03.500Z,1528877283.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:03.896Z,1528877283.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:06.999Z,1528877286.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:07.188Z,1528877287.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:07.559Z,1528877287.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:07.984Z,1528877287.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:08.356Z,1528877288.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:08.751Z,1528877288.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:09.148Z,1528877289.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:09.552Z,1528877289.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:09.951Z,1528877289.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:10.356Z,1528877290.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:10.784Z,1528877290.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:11.159Z,1528877291.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:11.548Z,1528877291.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:11.953Z,1528877291.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:12.352Z,1528877292.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:12.750Z,1528877292.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:13.160Z,1528877293.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:13.559Z,1528877293.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:13.960Z,1528877293.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:14.352Z,1528877294.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:14.751Z,1528877294.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:15.154Z,1528877295.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:15.559Z,1528877295.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:15.958Z,1528877295.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:16.351Z,1528877296.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:16.751Z,1528877296.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:17.160Z,1528877297.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:17.560Z,1528877297.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:17.959Z,1528877297.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:18.352Z,1528877298.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:18.751Z,1528877298.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:19.156Z,1528877299.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:19.559Z,1528877299.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:19.957Z,1528877299.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:20.354Z,1528877300.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:20.752Z,1528877300.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:21.160Z,1528877301.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:21.560Z,1528877301.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:21.957Z,1528877301.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:22.351Z,1528877302.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:22.751Z,1528877302.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:23.156Z,1528877303.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:23.560Z,1528877303.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:23.961Z,1528877303.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:24.351Z,1528877304.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:24.751Z,1528877304.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:25.160Z,1528877305.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:25.558Z,1528877305.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:25.955Z,1528877305.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:26.352Z,1528877306.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:26.752Z,1528877306.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:27.150Z,1528877307.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:27.561Z,1528877307.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:27.968Z,1528877307.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:28.361Z,1528877308.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:28.759Z,1528877308.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:29.159Z,1528877309.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:29.557Z,1528877309.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:29.959Z,1528877309.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:30.362Z,1528877310.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:30.766Z,1528877310.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:31.163Z,1528877311.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:31.560Z,1528877311.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:31.958Z,1528877311.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:32.358Z,1528877312.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:32.759Z,1528877312.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:33.158Z,1528877313.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:33.562Z,1528877313.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:33.972Z,1528877313.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:34.361Z,1528877314.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:34.764Z,1528877314.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:35.144Z,1528877315.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:35.545Z,1528877315.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:35.948Z,1528877315.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:36.373Z,1528877316.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:36.771Z,1528877316.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:37.174Z,1528877317.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:37.548Z,1528877317.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:37.952Z,1528877317.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:38.348Z,1528877318.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:38.752Z,1528877318.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:39.148Z,1528877319.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:39.575Z,1528877319.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:39.958Z,1528877319.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:40.360Z,1528877320.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:40.752Z,1528877320.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:41.151Z,1528877321.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:41.551Z,1528877321.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:41.950Z,1528877321.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:42.359Z,1528877322.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:42.759Z,1528877322.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:43.156Z,1528877323.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:43.556Z,1528877323.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:43.950Z,1528877323.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:44.349Z,1528877324.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:44.753Z,1528877324.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:45.150Z,1528877325.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:45.555Z,1528877325.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:45.981Z,1528877325.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:46.359Z,1528877326.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:46.749Z,1528877326.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:47.150Z,1528877327.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:47.550Z,1528877327.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:47.956Z,1528877327.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:48.355Z,1528877328.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:48.759Z,1528877328.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:49.155Z,1528877329.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:49.552Z,1528877329.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:49.953Z,1528877329.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:50.352Z,1528877330.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:50.755Z,1528877330.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:51.147Z,1528877331.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:51.556Z,1528877331.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:51.960Z,1528877331.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:52.356Z,1528877332.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:52.751Z,1528877332.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:53.152Z,1528877333.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:53.556Z,1528877333.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:53.950Z,1528877333.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:54.360Z,1528877334.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:54.760Z,1528877334.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:55.155Z,1528877335.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:55.552Z,1528877335.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:55.948Z,1528877335.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:56.352Z,1528877336.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:56.758Z,1528877336.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:57.151Z,1528877337.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:57.559Z,1528877337.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:57.959Z,1528877337.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:58.360Z,1528877338.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:58.750Z,1528877338.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:59.152Z,1528877339.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:59.551Z,1528877339.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:08:59.951Z,1528877339.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:00.364Z,1528877340.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:00.759Z,1528877340.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:01.157Z,1528877341.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:01.552Z,1528877341.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:01.948Z,1528877341.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:02.351Z,1528877342.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:02.752Z,1528877342.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:03.148Z,1528877343.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:03.560Z,1528877343.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:03.563Z,1528877343.563 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T08:09:03.563Z,1528877343.563 [Default:CheckIn:C.Wait] Stopped
2018-06-13T08:09:03.563Z,1528877343.563 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T08:09:03.563Z,1528877343.563 [Default:CheckIn:D] Running Loop=1
2018-06-13T08:09:03.963Z,1528877343.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:03.966Z,1528877343.966 [Default:CheckIn:D] Stopped
2018-06-13T08:09:03.966Z,1528877343.966 [Default:CheckIn:E] Running Loop=1
2018-06-13T08:09:07.143Z,1528877347.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:07.147Z,1528877347.147 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 281.842025 min 
2018-06-13T08:09:07.147Z,1528877347.147 [Default:CheckIn:E] Stopped
2018-06-13T08:09:07.147Z,1528877347.147 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T08:09:07.147Z,1528877347.147 [Default:CheckIn] Stopped
2018-06-13T08:09:07.147Z,1528877347.147 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T08:09:07.148Z,1528877347.148 [Default:CheckIn](INFO): Running loop #28
2018-06-13T08:09:07.148Z,1528877347.148 [Default:CheckIn] Running Loop=28
2018-06-13T08:09:07.148Z,1528877347.148 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T08:09:07.148Z,1528877347.148 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T08:09:07.286Z,1528877347.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:07.676Z,1528877347.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:08.070Z,1528877348.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:08.472Z,1528877348.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:08.873Z,1528877348.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:09.276Z,1528877349.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:09.705Z,1528877349.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:10.080Z,1528877350.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:10.470Z,1528877350.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:10.870Z,1528877350.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:11.283Z,1528877351.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:11.677Z,1528877351.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:12.080Z,1528877352.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:12.474Z,1528877352.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:12.868Z,1528877352.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:13.279Z,1528877353.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:13.688Z,1528877353.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:14.084Z,1528877354.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:14.472Z,1528877354.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:14.872Z,1528877354.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:15.281Z,1528877355.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:15.689Z,1528877355.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:16.112Z,1528877356.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:16.473Z,1528877356.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:16.872Z,1528877356.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:17.292Z,1528877357.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:17.679Z,1528877357.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:18.080Z,1528877358.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:18.474Z,1528877358.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:18.888Z,1528877358.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:19.283Z,1528877359.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:19.696Z,1528877359.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:20.086Z,1528877360.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:20.486Z,1528877360.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:20.881Z,1528877360.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:21.290Z,1528877361.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:21.688Z,1528877361.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:22.089Z,1528877362.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:22.465Z,1528877362.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:22.868Z,1528877362.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:23.301Z,1528877363.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:23.691Z,1528877363.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:24.094Z,1528877364.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:24.466Z,1528877364.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:24.864Z,1528877364.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:25.295Z,1528877365.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:25.693Z,1528877365.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:26.091Z,1528877366.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:26.469Z,1528877366.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:26.868Z,1528877366.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:27.275Z,1528877367.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:27.678Z,1528877367.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:28.080Z,1528877368.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:28.470Z,1528877368.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:28.870Z,1528877368.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:29.279Z,1528877369.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:29.675Z,1528877369.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:30.076Z,1528877370.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:30.471Z,1528877370.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:30.871Z,1528877370.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:31.275Z,1528877371.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:31.679Z,1528877371.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:32.076Z,1528877372.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:32.470Z,1528877372.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:32.876Z,1528877372.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:33.275Z,1528877373.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:33.678Z,1528877373.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:34.079Z,1528877374.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:34.470Z,1528877374.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:34.870Z,1528877374.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:35.279Z,1528877375.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:35.679Z,1528877375.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:36.075Z,1528877376.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:36.476Z,1528877376.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:36.868Z,1528877376.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:37.275Z,1528877377.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:37.679Z,1528877377.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:38.075Z,1528877378.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:38.476Z,1528877378.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:38.876Z,1528877378.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:39.273Z,1528877379.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:39.679Z,1528877379.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:40.079Z,1528877380.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:40.473Z,1528877380.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:40.871Z,1528877380.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:41.272Z,1528877381.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:41.674Z,1528877381.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:42.078Z,1528877382.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:42.476Z,1528877382.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:42.883Z,1528877382.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:43.271Z,1528877383.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:43.686Z,1528877383.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:44.069Z,1528877384.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:44.477Z,1528877384.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:44.884Z,1528877384.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:45.280Z,1528877385.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:45.670Z,1528877385.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:46.072Z,1528877386.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:46.469Z,1528877386.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:46.871Z,1528877386.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:47.275Z,1528877387.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:47.676Z,1528877387.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:48.084Z,1528877388.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:48.480Z,1528877388.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:48.867Z,1528877388.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:49.273Z,1528877389.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:49.673Z,1528877389.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:50.072Z,1528877390.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:50.477Z,1528877390.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:50.879Z,1528877390.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:51.275Z,1528877391.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:51.670Z,1528877391.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:52.073Z,1528877392.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:52.468Z,1528877392.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:52.871Z,1528877392.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:53.271Z,1528877393.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:53.680Z,1528877393.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:54.080Z,1528877394.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:54.479Z,1528877394.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:54.868Z,1528877394.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:55.270Z,1528877395.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:55.680Z,1528877395.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:56.068Z,1528877396.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:56.480Z,1528877396.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:56.883Z,1528877396.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:57.275Z,1528877397.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:57.672Z,1528877397.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:58.071Z,1528877398.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:58.468Z,1528877398.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:58.873Z,1528877398.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:59.271Z,1528877399.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:09:59.680Z,1528877399.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:00.079Z,1528877400.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:00.479Z,1528877400.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:00.867Z,1528877400.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:01.271Z,1528877401.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:01.672Z,1528877401.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:02.068Z,1528877402.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:02.430Z,1528877402.430 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T08:10:02.431Z,1528877402.431 [NAL9602] Data Fault, FailCount= 1
2018-06-13T08:10:02.431Z,1528877402.431 [NAL9602](ERROR): Data Fault
2018-06-13T08:10:02.483Z,1528877402.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:02.573Z,1528877402.573 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T08:10:02.830Z,1528877402.830 [NAL9602](INFO): Powering down
2018-06-13T08:10:02.900Z,1528877402.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:03.276Z,1528877403.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:03.675Z,1528877403.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:03.749Z,1528877403.749 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T08:10:03.749Z,1528877403.749 [NAL9602] No Fault, FailCount= 1
2018-06-13T08:10:04.071Z,1528877404.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:07.179Z,1528877407.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:07.356Z,1528877407.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:07.728Z,1528877407.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:08.125Z,1528877408.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:08.525Z,1528877408.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:08.926Z,1528877408.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:09.322Z,1528877409.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:09.733Z,1528877409.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:10.126Z,1528877410.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:10.522Z,1528877410.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:10.925Z,1528877410.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:11.326Z,1528877411.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:11.722Z,1528877411.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:12.125Z,1528877412.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:12.526Z,1528877412.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:12.925Z,1528877412.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:13.325Z,1528877413.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:13.726Z,1528877413.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:14.122Z,1528877414.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:14.525Z,1528877414.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:14.926Z,1528877414.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:15.322Z,1528877415.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:15.725Z,1528877415.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:16.126Z,1528877416.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:16.522Z,1528877416.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:16.925Z,1528877416.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:17.326Z,1528877417.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:17.726Z,1528877417.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:18.125Z,1528877418.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:18.527Z,1528877418.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:18.928Z,1528877418.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:19.327Z,1528877419.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:19.726Z,1528877419.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:20.126Z,1528877420.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:20.525Z,1528877420.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:20.926Z,1528877420.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:21.326Z,1528877421.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:21.725Z,1528877421.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:22.126Z,1528877422.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:22.522Z,1528877422.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:22.928Z,1528877422.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:23.327Z,1528877423.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:23.722Z,1528877423.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:24.126Z,1528877424.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:24.526Z,1528877424.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:24.923Z,1528877424.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:25.326Z,1528877425.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:25.723Z,1528877425.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:26.123Z,1528877426.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:26.526Z,1528877426.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:26.923Z,1528877426.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:27.322Z,1528877427.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:27.726Z,1528877427.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:28.123Z,1528877428.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:28.522Z,1528877428.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:28.925Z,1528877428.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:29.322Z,1528877429.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:29.722Z,1528877429.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:30.124Z,1528877430.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:30.522Z,1528877430.522 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:30.522Z,1528877430.522 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95
2018-06-13T08:10:30.522Z,1528877430.522 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:10:30.523Z,1528877430.523 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:30.524Z,1528877430.524 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95
2018-06-13T08:10:30.524Z,1528877430.524 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:10:30.525Z,1528877430.525 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:30.526Z,1528877430.526 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 95
2018-06-13T08:10:30.526Z,1528877430.526 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:10:30.598Z,1528877430.598 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:10:30.598Z,1528877430.598 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:10:30.598Z,1528877430.598 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:10:31.007Z,1528877431.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:10:31.007Z,1528877431.007 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95
2018-06-13T08:10:31.007Z,1528877431.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:10:31.007Z,1528877431.007 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95
2018-06-13T08:10:31.008Z,1528877431.008 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:10:31.008Z,1528877431.008 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 95
2018-06-13T08:10:31.325Z,1528877431.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:10:31.326Z,1528877431.326 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:10:31.326Z,1528877431.326 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:10:31.327Z,1528877431.327 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:10:31.327Z,1528877431.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:10:31.327Z,1528877431.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:10:31.328Z,1528877431.328 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:10:31.328Z,1528877431.328 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:10:31.328Z,1528877431.328 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:10:31.735Z,1528877431.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:10:31.736Z,1528877431.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:32.133Z,1528877432.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:10:32.134Z,1528877432.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:32.531Z,1528877432.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:10:32.532Z,1528877432.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:32.882Z,1528877432.882 [NAL9602](INFO): Powering up NAL9602
2018-06-13T08:10:32.939Z,1528877432.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:10:32.940Z,1528877432.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:33.334Z,1528877433.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:10:33.335Z,1528877433.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:33.727Z,1528877433.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:10:33.728Z,1528877433.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:34.137Z,1528877434.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:10:34.138Z,1528877434.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:34.532Z,1528877434.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:10:34.533Z,1528877434.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:34.933Z,1528877434.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:10:34.934Z,1528877434.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:35.336Z,1528877435.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:10:35.337Z,1528877435.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:35.724Z,1528877435.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:10:35.730Z,1528877435.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:36.139Z,1528877436.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:10:36.140Z,1528877436.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:36.540Z,1528877436.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:10:36.541Z,1528877436.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:36.915Z,1528877436.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:10:36.916Z,1528877436.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:37.319Z,1528877437.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:10:37.320Z,1528877437.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:37.716Z,1528877437.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:10:37.717Z,1528877437.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:38.122Z,1528877438.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:10:38.123Z,1528877438.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:38.522Z,1528877438.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:10:38.523Z,1528877438.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:38.921Z,1528877438.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:10:38.922Z,1528877438.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:39.322Z,1528877439.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:10:39.323Z,1528877439.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:39.723Z,1528877439.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:10:39.724Z,1528877439.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:40.118Z,1528877440.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:10:40.119Z,1528877440.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:40.523Z,1528877440.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:10:40.524Z,1528877440.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:40.922Z,1528877440.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:10:40.923Z,1528877440.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:41.321Z,1528877441.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:10:41.322Z,1528877441.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:41.722Z,1528877441.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:10:41.723Z,1528877441.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:42.122Z,1528877442.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:10:42.123Z,1528877442.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:42.527Z,1528877442.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:10:42.528Z,1528877442.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:42.922Z,1528877442.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:10:42.923Z,1528877442.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:43.354Z,1528877443.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:10:43.355Z,1528877443.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:43.685Z,1528877443.685 [NAL9602](INFO): NAL9602 initialized
2018-06-13T08:10:43.724Z,1528877443.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:10:43.724Z,1528877443.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:44.123Z,1528877444.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:10:44.124Z,1528877444.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:44.555Z,1528877444.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:10:44.556Z,1528877444.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:44.951Z,1528877444.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:10:44.952Z,1528877444.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:45.334Z,1528877445.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:10:45.335Z,1528877445.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:45.726Z,1528877445.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:10:45.727Z,1528877445.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:46.123Z,1528877446.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:10:46.124Z,1528877446.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:46.526Z,1528877446.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:10:46.526Z,1528877446.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:46.939Z,1528877446.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T08:10:46.940Z,1528877446.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:47.338Z,1528877447.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T08:10:47.339Z,1528877447.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:47.736Z,1528877447.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T08:10:47.737Z,1528877447.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:48.126Z,1528877448.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T08:10:48.127Z,1528877448.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:48.541Z,1528877448.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T08:10:48.542Z,1528877448.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:48.928Z,1528877448.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T08:10:48.929Z,1528877448.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:49.329Z,1528877449.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T08:10:49.330Z,1528877449.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:49.736Z,1528877449.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T08:10:49.737Z,1528877449.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:50.137Z,1528877450.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T08:10:50.138Z,1528877450.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:50.540Z,1528877450.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:50.927Z,1528877450.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:51.332Z,1528877451.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:51.729Z,1528877451.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:52.132Z,1528877452.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:52.528Z,1528877452.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:52.940Z,1528877452.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:53.338Z,1528877453.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:53.736Z,1528877453.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:54.129Z,1528877454.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:54.535Z,1528877454.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:54.927Z,1528877454.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:55.336Z,1528877455.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:55.737Z,1528877455.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:56.142Z,1528877456.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:56.548Z,1528877456.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:56.926Z,1528877456.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:57.336Z,1528877457.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:57.732Z,1528877457.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:58.124Z,1528877458.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:58.526Z,1528877458.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:58.935Z,1528877458.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:59.335Z,1528877459.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:10:59.731Z,1528877459.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:00.127Z,1528877460.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:00.523Z,1528877460.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:00.927Z,1528877460.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:01.326Z,1528877461.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:01.736Z,1528877461.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:02.135Z,1528877462.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:02.535Z,1528877462.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:02.926Z,1528877462.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:03.323Z,1528877463.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:03.729Z,1528877463.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:04.129Z,1528877464.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:07.238Z,1528877467.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:07.421Z,1528877467.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:07.816Z,1528877467.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:08.215Z,1528877468.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:08.592Z,1528877468.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:09.012Z,1528877469.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:09.388Z,1528877469.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:09.815Z,1528877469.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:10.199Z,1528877470.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:10.600Z,1528877470.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:10.991Z,1528877470.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:11.391Z,1528877471.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:11.792Z,1528877471.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:12.190Z,1528877472.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:12.596Z,1528877472.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:13.000Z,1528877473.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:13.395Z,1528877473.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:13.791Z,1528877473.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:14.187Z,1528877474.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:14.595Z,1528877474.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:14.999Z,1528877474.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:15.394Z,1528877475.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:15.791Z,1528877475.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:16.190Z,1528877476.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:16.598Z,1528877476.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:16.999Z,1528877476.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:17.400Z,1528877477.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:17.792Z,1528877477.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:18.192Z,1528877478.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:18.597Z,1528877478.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:18.996Z,1528877478.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:19.401Z,1528877479.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:19.804Z,1528877479.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:20.187Z,1528877480.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:20.600Z,1528877480.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:20.000Z,1528877481.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:21.397Z,1528877481.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:21.790Z,1528877481.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:22.196Z,1528877482.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:22.588Z,1528877482.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:23.004Z,1528877483.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:23.399Z,1528877483.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:23.800Z,1528877483.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:24.191Z,1528877484.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:24.590Z,1528877484.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:24.987Z,1528877484.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:25.391Z,1528877485.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:25.800Z,1528877485.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:26.200Z,1528877486.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:26.599Z,1528877486.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:27.004Z,1528877487.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:27.391Z,1528877487.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:27.792Z,1528877487.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:28.199Z,1528877488.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:28.589Z,1528877488.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:29.005Z,1528877489.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:29.406Z,1528877489.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:29.804Z,1528877489.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:30.194Z,1528877490.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:30.593Z,1528877490.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:30.994Z,1528877490.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:31.391Z,1528877491.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:31.801Z,1528877491.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:32.203Z,1528877492.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:32.605Z,1528877492.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:32.999Z,1528877492.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:33.393Z,1528877493.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:33.792Z,1528877493.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:34.195Z,1528877494.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:34.593Z,1528877494.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:35.012Z,1528877495.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:35.406Z,1528877495.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:35.802Z,1528877495.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:36.192Z,1528877496.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:36.594Z,1528877496.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:36.995Z,1528877496.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:37.392Z,1528877497.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:37.802Z,1528877497.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:38.202Z,1528877498.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:38.601Z,1528877498.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:38.995Z,1528877498.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:39.393Z,1528877499.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:39.794Z,1528877499.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:40.195Z,1528877500.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:40.593Z,1528877500.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:41.006Z,1528877501.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:41.412Z,1528877501.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:41.801Z,1528877501.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:42.196Z,1528877502.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:42.604Z,1528877502.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:42.989Z,1528877502.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:43.402Z,1528877503.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:43.812Z,1528877503.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:44.207Z,1528877504.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:44.605Z,1528877504.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:45.001Z,1528877505.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:45.384Z,1528877505.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:45.784Z,1528877505.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:46.208Z,1528877506.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:46.592Z,1528877506.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:47.015Z,1528877507.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:47.400Z,1528877507.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:47.799Z,1528877507.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:48.190Z,1528877508.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:48.600Z,1528877508.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:48.990Z,1528877508.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:49.392Z,1528877509.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:49.795Z,1528877509.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:50.195Z,1528877510.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:50.596Z,1528877510.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:50.991Z,1528877510.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:51.389Z,1528877511.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:51.790Z,1528877511.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:52.191Z,1528877512.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:52.588Z,1528877512.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:52.000Z,1528877513.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:53.400Z,1528877513.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:53.800Z,1528877513.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:54.190Z,1528877514.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:54.590Z,1528877514.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:54.988Z,1528877514.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:55.391Z,1528877515.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:55.796Z,1528877515.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:56.200Z,1528877516.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:56.595Z,1528877516.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:56.996Z,1528877516.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:57.387Z,1528877517.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:57.791Z,1528877517.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:58.195Z,1528877518.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:58.587Z,1528877518.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:58.999Z,1528877518.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:59.400Z,1528877519.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:11:59.804Z,1528877519.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:00.196Z,1528877520.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:00.590Z,1528877520.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:00.988Z,1528877520.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:01.393Z,1528877521.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:01.801Z,1528877521.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:02.197Z,1528877522.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:02.595Z,1528877522.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:03.001Z,1528877523.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:03.392Z,1528877523.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:03.790Z,1528877523.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:04.196Z,1528877524.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:04.591Z,1528877524.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:05.004Z,1528877525.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:05.404Z,1528877525.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:08.703Z,1528877528.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:08.880Z,1528877528.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:09.253Z,1528877529.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:09.652Z,1528877529.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:10.053Z,1528877530.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:10.452Z,1528877530.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:10.858Z,1528877530.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:11.284Z,1528877531.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:11.663Z,1528877531.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:12.053Z,1528877532.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:12.456Z,1528877532.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:12.852Z,1528877532.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:13.252Z,1528877533.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:13.656Z,1528877533.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:14.079Z,1528877534.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:14.462Z,1528877534.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:14.863Z,1528877534.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:15.255Z,1528877535.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:15.652Z,1528877535.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:16.062Z,1528877536.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:16.455Z,1528877536.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:16.862Z,1528877536.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:17.268Z,1528877537.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:17.688Z,1528877537.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:18.056Z,1528877538.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:18.456Z,1528877538.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:18.860Z,1528877538.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:19.257Z,1528877539.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:19.657Z,1528877539.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:20.064Z,1528877540.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:20.464Z,1528877540.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:20.868Z,1528877540.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:21.259Z,1528877541.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:21.652Z,1528877541.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:22.056Z,1528877542.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:22.459Z,1528877542.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:22.865Z,1528877542.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:23.269Z,1528877543.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:23.668Z,1528877543.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:24.056Z,1528877544.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:24.459Z,1528877544.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:24.855Z,1528877544.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:25.252Z,1528877545.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:25.660Z,1528877545.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:26.067Z,1528877546.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:26.464Z,1528877546.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:26.863Z,1528877546.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:27.257Z,1528877547.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:27.656Z,1528877547.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:28.055Z,1528877548.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:28.464Z,1528877548.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:28.864Z,1528877548.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:29.267Z,1528877549.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:29.667Z,1528877549.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:30.051Z,1528877550.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:30.465Z,1528877550.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:30.859Z,1528877550.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:31.269Z,1528877551.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:31.656Z,1528877551.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:32.069Z,1528877552.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:32.474Z,1528877552.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:32.872Z,1528877552.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:33.267Z,1528877553.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:33.655Z,1528877553.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:34.056Z,1528877554.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:34.462Z,1528877554.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:34.869Z,1528877554.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:35.270Z,1528877555.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:35.669Z,1528877555.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:36.058Z,1528877556.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:36.456Z,1528877556.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:36.869Z,1528877556.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:37.262Z,1528877557.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:37.660Z,1528877557.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:38.074Z,1528877558.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:38.468Z,1528877558.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:38.870Z,1528877558.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:39.273Z,1528877559.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:39.660Z,1528877559.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:40.064Z,1528877560.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:40.472Z,1528877560.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:40.870Z,1528877560.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:41.270Z,1528877561.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:41.676Z,1528877561.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:42.065Z,1528877562.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:42.452Z,1528877562.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:42.853Z,1528877562.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:43.256Z,1528877563.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:43.654Z,1528877563.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:44.081Z,1528877564.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:44.479Z,1528877564.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:44.882Z,1528877564.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:45.259Z,1528877565.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:45.651Z,1528877565.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:46.057Z,1528877566.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:46.527Z,1528877566.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:46.885Z,1528877566.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:47.284Z,1528877567.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:47.663Z,1528877567.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:48.068Z,1528877568.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:48.458Z,1528877568.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:48.865Z,1528877568.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:49.266Z,1528877569.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:49.688Z,1528877569.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:50.087Z,1528877570.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:50.464Z,1528877570.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:50.863Z,1528877570.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:51.286Z,1528877571.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:51.672Z,1528877571.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:52.087Z,1528877572.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:52.471Z,1528877572.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:52.886Z,1528877572.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:53.291Z,1528877573.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:53.664Z,1528877573.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:54.056Z,1528877574.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:54.484Z,1528877574.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:54.859Z,1528877574.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:55.258Z,1528877575.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:55.683Z,1528877575.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:56.091Z,1528877576.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:56.468Z,1528877576.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:56.863Z,1528877576.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:57.262Z,1528877577.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:57.672Z,1528877577.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:58.062Z,1528877578.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:58.460Z,1528877578.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:58.863Z,1528877578.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:59.294Z,1528877579.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:12:59.669Z,1528877579.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:00.057Z,1528877580.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:00.473Z,1528877580.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:00.870Z,1528877580.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:01.266Z,1528877581.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:01.661Z,1528877581.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:02.075Z,1528877582.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:02.496Z,1528877582.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:02.870Z,1528877582.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:03.264Z,1528877583.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:03.658Z,1528877583.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:04.096Z,1528877584.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:04.469Z,1528877584.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:07.571Z,1528877587.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:07.749Z,1528877587.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:08.123Z,1528877588.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:08.519Z,1528877588.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:08.927Z,1528877588.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:09.319Z,1528877589.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:09.715Z,1528877589.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:10.124Z,1528877590.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:10.522Z,1528877590.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:10.922Z,1528877590.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:11.317Z,1528877591.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:11.717Z,1528877591.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:12.117Z,1528877592.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:12.516Z,1528877592.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:12.921Z,1528877592.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:13.322Z,1528877593.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:13.723Z,1528877593.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:14.118Z,1528877594.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:14.518Z,1528877594.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:14.916Z,1528877594.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:15.319Z,1528877595.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:15.718Z,1528877595.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:16.124Z,1528877596.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:16.526Z,1528877596.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:16.925Z,1528877596.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:17.319Z,1528877597.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:17.717Z,1528877597.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:18.120Z,1528877598.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:18.517Z,1528877598.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:18.924Z,1528877598.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:19.323Z,1528877599.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:19.723Z,1528877599.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:20.117Z,1528877600.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:20.520Z,1528877600.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:20.920Z,1528877600.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:21.318Z,1528877601.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:21.720Z,1528877601.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:22.123Z,1528877602.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:22.522Z,1528877602.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:22.928Z,1528877602.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:23.319Z,1528877603.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:23.721Z,1528877603.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:24.119Z,1528877604.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:24.518Z,1528877604.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:24.923Z,1528877604.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:25.324Z,1528877605.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:25.725Z,1528877605.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:26.116Z,1528877606.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:26.541Z,1528877606.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:26.939Z,1528877606.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:27.323Z,1528877607.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:27.720Z,1528877607.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:28.127Z,1528877608.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:28.527Z,1528877608.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:28.928Z,1528877608.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:29.318Z,1528877609.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:29.736Z,1528877609.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:30.136Z,1528877610.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:30.519Z,1528877610.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:30.929Z,1528877610.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:31.350Z,1528877611.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:31.350Z,1528877611.350 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96
2018-06-13T08:13:31.350Z,1528877611.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:13:31.352Z,1528877611.352 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:31.352Z,1528877611.352 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96
2018-06-13T08:13:31.352Z,1528877611.352 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:13:31.354Z,1528877611.354 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:31.354Z,1528877611.354 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 96
2018-06-13T08:13:31.354Z,1528877611.354 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:13:31.433Z,1528877611.433 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:13:31.433Z,1528877611.433 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:13:31.434Z,1528877611.434 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:13:31.841Z,1528877611.841 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:13:31.841Z,1528877611.841 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96
2018-06-13T08:13:31.842Z,1528877611.842 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:13:31.842Z,1528877611.842 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96
2018-06-13T08:13:31.842Z,1528877611.842 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:13:31.842Z,1528877611.842 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 96
2018-06-13T08:13:32.130Z,1528877612.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:13:32.131Z,1528877612.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:13:32.131Z,1528877612.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:13:32.131Z,1528877612.131 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:13:32.132Z,1528877612.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:13:32.132Z,1528877612.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:13:32.132Z,1528877612.132 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:13:32.133Z,1528877612.133 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:13:32.133Z,1528877612.133 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:13:32.535Z,1528877612.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:13:32.536Z,1528877612.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:32.935Z,1528877612.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:13:32.936Z,1528877612.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:33.324Z,1528877613.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:13:33.326Z,1528877613.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:33.712Z,1528877613.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:13:33.729Z,1528877613.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:34.137Z,1528877614.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:13:34.138Z,1528877614.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:34.542Z,1528877614.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:13:34.543Z,1528877614.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:34.940Z,1528877614.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:13:34.941Z,1528877614.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:35.316Z,1528877615.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:13:35.333Z,1528877615.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:35.714Z,1528877615.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:13:35.715Z,1528877615.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:36.139Z,1528877616.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:13:36.140Z,1528877616.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:36.510Z,1528877616.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:13:36.512Z,1528877616.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:36.945Z,1528877616.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:13:36.946Z,1528877616.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:37.322Z,1528877617.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:13:37.323Z,1528877617.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:37.743Z,1528877617.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:13:37.744Z,1528877617.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:38.120Z,1528877618.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:13:38.121Z,1528877618.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:38.517Z,1528877618.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:13:38.518Z,1528877618.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:38.933Z,1528877618.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:13:38.934Z,1528877618.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:39.339Z,1528877619.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:13:39.340Z,1528877619.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:39.718Z,1528877619.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:13:39.720Z,1528877619.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:40.124Z,1528877620.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:13:40.141Z,1528877620.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:40.522Z,1528877620.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:13:40.523Z,1528877620.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:40.944Z,1528877620.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:13:40.945Z,1528877620.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:41.315Z,1528877621.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:13:41.316Z,1528877621.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:41.720Z,1528877621.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:13:41.721Z,1528877621.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:42.118Z,1528877622.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:13:42.119Z,1528877622.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:42.545Z,1528877622.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:13:42.546Z,1528877622.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:42.924Z,1528877622.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:13:42.926Z,1528877622.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:43.325Z,1528877623.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:13:43.326Z,1528877623.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:43.723Z,1528877623.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:13:43.724Z,1528877623.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:44.150Z,1528877624.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:13:44.151Z,1528877624.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:44.511Z,1528877624.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:13:44.512Z,1528877624.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:44.915Z,1528877624.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:13:44.918Z,1528877624.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:45.327Z,1528877625.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:13:45.328Z,1528877625.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:45.712Z,1528877625.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:13:45.713Z,1528877625.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:46.131Z,1528877626.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:13:46.132Z,1528877626.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:46.533Z,1528877626.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:13:46.534Z,1528877626.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:46.931Z,1528877626.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:13:46.932Z,1528877626.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:47.332Z,1528877627.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:13:47.333Z,1528877627.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:47.720Z,1528877627.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T08:13:47.721Z,1528877627.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:48.118Z,1528877628.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T08:13:48.120Z,1528877628.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:48.517Z,1528877628.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T08:13:48.518Z,1528877628.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:48.932Z,1528877628.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T08:13:48.933Z,1528877628.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:49.325Z,1528877629.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T08:13:49.326Z,1528877629.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:49.729Z,1528877629.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T08:13:49.730Z,1528877629.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:50.134Z,1528877630.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T08:13:50.135Z,1528877630.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:50.513Z,1528877630.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T08:13:50.514Z,1528877630.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:50.924Z,1528877630.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T08:13:50.925Z,1528877630.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:51.327Z,1528877631.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T08:13:51.333Z,1528877631.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:51.726Z,1528877631.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:52.128Z,1528877632.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:52.528Z,1528877632.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:52.936Z,1528877632.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:53.330Z,1528877633.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:53.724Z,1528877633.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:54.122Z,1528877634.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:54.521Z,1528877634.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:54.930Z,1528877634.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:55.326Z,1528877635.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:55.726Z,1528877635.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:56.130Z,1528877636.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:56.516Z,1528877636.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:56.924Z,1528877636.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:57.326Z,1528877637.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:57.708Z,1528877637.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:58.139Z,1528877638.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:58.541Z,1528877638.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:58.949Z,1528877638.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:59.312Z,1528877639.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:13:59.712Z,1528877639.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:00.111Z,1528877640.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:00.512Z,1528877640.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:00.915Z,1528877640.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:01.318Z,1528877641.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:01.723Z,1528877641.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:02.113Z,1528877642.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:02.512Z,1528877642.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:02.913Z,1528877642.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:03.314Z,1528877643.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:03.711Z,1528877643.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:04.127Z,1528877644.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:04.524Z,1528877644.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:04.922Z,1528877644.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:05.315Z,1528877645.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:05.718Z,1528877645.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:06.115Z,1528877646.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:06.518Z,1528877646.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:06.924Z,1528877646.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:07.325Z,1528877647.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:07.328Z,1528877647.328 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T08:09:07.1Z
2018-06-13T08:14:07.328Z,1528877647.328 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T08:14:07.328Z,1528877647.328 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T08:14:10.459Z,1528877650.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:11.482Z,1528877651.482 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0112.lzma
2018-06-13T08:14:11.526Z,1528877651.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:11.699Z,1528877651.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:12.022Z,1528877652.022 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0112.lzma.bak
2018-06-13T08:14:12.022Z,1528877652.022 [DataOverHttps](INFO): SBD MOMSN=8328878
2018-06-13T08:14:12.099Z,1528877652.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:13.964Z,1528877653.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:14.133Z,1528877654.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:17.261Z,1528877657.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:17.414Z,1528877657.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:17.818Z,1528877657.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:18.219Z,1528877658.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:18.617Z,1528877658.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:19.008Z,1528877659.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:22.113Z,1528877662.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:22.206Z,1528877662.206 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0113.lzma
2018-06-13T08:14:22.271Z,1528877662.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:22.666Z,1528877662.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:23.007Z,1528877663.007 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0113.lzma.bak
2018-06-13T08:14:23.008Z,1528877663.008 [DataOverHttps](INFO): SBD MOMSN=8328880
2018-06-13T08:14:23.082Z,1528877663.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:24.962Z,1528877664.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:24.964Z,1528877664.964 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T08:14:24.964Z,1528877664.964 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T08:14:24.965Z,1528877664.965 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T08:14:25.113Z,1528877665.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:25.511Z,1528877665.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:25.908Z,1528877665.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:26.308Z,1528877666.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:29.420Z,1528877669.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:29.601Z,1528877669.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:30.008Z,1528877670.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:30.380Z,1528877670.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:30.763Z,1528877670.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:31.162Z,1528877671.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:31.562Z,1528877671.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:31.969Z,1528877671.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:32.369Z,1528877672.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:32.777Z,1528877672.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:33.162Z,1528877673.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:33.566Z,1528877673.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:33.968Z,1528877673.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:34.365Z,1528877674.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:34.748Z,1528877674.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:35.172Z,1528877675.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:35.571Z,1528877675.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:35.971Z,1528877675.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:36.353Z,1528877676.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:36.753Z,1528877676.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:37.154Z,1528877677.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:37.555Z,1528877677.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:37.964Z,1528877677.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:38.386Z,1528877678.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:38.763Z,1528877678.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:39.152Z,1528877679.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:39.555Z,1528877679.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:39.955Z,1528877679.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:40.357Z,1528877680.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:40.764Z,1528877680.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:41.186Z,1528877681.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:41.564Z,1528877681.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:41.992Z,1528877681.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:42.458Z,1528877682.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:42.827Z,1528877682.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:43.249Z,1528877683.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:43.555Z,1528877683.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:43.957Z,1528877683.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:44.363Z,1528877684.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:44.763Z,1528877684.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:45.157Z,1528877685.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:45.556Z,1528877685.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:45.972Z,1528877685.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:46.365Z,1528877686.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:46.764Z,1528877686.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:47.156Z,1528877687.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:47.560Z,1528877687.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:47.965Z,1528877687.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:48.372Z,1528877688.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:48.768Z,1528877688.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:49.156Z,1528877689.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:49.559Z,1528877689.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:49.965Z,1528877689.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:50.368Z,1528877690.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:50.765Z,1528877690.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:51.155Z,1528877691.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:51.556Z,1528877691.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:51.969Z,1528877691.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:52.372Z,1528877692.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:52.764Z,1528877692.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:53.156Z,1528877693.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:53.552Z,1528877693.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:53.965Z,1528877693.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:54.369Z,1528877694.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:54.772Z,1528877694.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:55.157Z,1528877695.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:55.560Z,1528877695.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:55.972Z,1528877695.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:56.368Z,1528877696.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:56.770Z,1528877696.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:57.153Z,1528877697.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:57.558Z,1528877697.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:57.976Z,1528877697.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:58.364Z,1528877698.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:58.764Z,1528877698.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:59.159Z,1528877699.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:59.564Z,1528877699.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:14:59.965Z,1528877699.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:00.370Z,1528877700.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:00.761Z,1528877700.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:01.157Z,1528877701.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:01.570Z,1528877701.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:01.961Z,1528877701.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:02.373Z,1528877702.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:02.770Z,1528877702.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:03.162Z,1528877703.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:03.556Z,1528877703.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:03.970Z,1528877703.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:04.367Z,1528877704.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:04.764Z,1528877704.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:05.160Z,1528877705.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:05.556Z,1528877705.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:05.964Z,1528877705.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:06.372Z,1528877706.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:06.768Z,1528877706.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:07.158Z,1528877707.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:07.564Z,1528877707.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:07.964Z,1528877707.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:08.363Z,1528877708.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:08.770Z,1528877708.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:09.157Z,1528877709.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:09.556Z,1528877709.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:09.970Z,1528877709.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:10.364Z,1528877710.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:10.765Z,1528877710.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:11.161Z,1528877711.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:11.556Z,1528877711.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:11.969Z,1528877711.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:12.370Z,1528877712.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:12.768Z,1528877712.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:13.157Z,1528877713.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:13.566Z,1528877713.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:13.972Z,1528877713.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:14.367Z,1528877714.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:14.770Z,1528877714.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:15.157Z,1528877715.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:15.564Z,1528877715.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:15.975Z,1528877715.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:16.371Z,1528877716.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:16.776Z,1528877716.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:17.145Z,1528877717.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:17.572Z,1528877717.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:17.956Z,1528877717.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:18.384Z,1528877718.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:18.781Z,1528877718.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:19.183Z,1528877719.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:19.553Z,1528877719.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:19.949Z,1528877719.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:20.354Z,1528877720.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:20.760Z,1528877720.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:21.156Z,1528877721.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:21.563Z,1528877721.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:21.964Z,1528877721.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:22.358Z,1528877722.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:22.768Z,1528877722.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:23.169Z,1528877723.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:23.565Z,1528877723.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:23.956Z,1528877723.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:24.377Z,1528877724.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:24.765Z,1528877724.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:25.169Z,1528877725.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:25.562Z,1528877725.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:28.669Z,1528877728.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:28.821Z,1528877728.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:29.221Z,1528877729.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:29.625Z,1528877729.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:30.017Z,1528877730.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:30.406Z,1528877730.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:30.806Z,1528877730.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:31.204Z,1528877731.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:31.609Z,1528877731.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:32.017Z,1528877732.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:32.416Z,1528877732.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:32.818Z,1528877732.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:33.208Z,1528877733.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:33.605Z,1528877733.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:34.018Z,1528877734.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:34.417Z,1528877734.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:34.816Z,1528877734.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:35.219Z,1528877735.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:35.610Z,1528877735.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:36.016Z,1528877736.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:36.417Z,1528877736.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:36.810Z,1528877736.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:37.213Z,1528877737.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:37.616Z,1528877737.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:38.016Z,1528877738.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:38.418Z,1528877738.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:38.818Z,1528877738.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:39.209Z,1528877739.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:39.608Z,1528877739.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:40.021Z,1528877740.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:40.424Z,1528877740.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:40.818Z,1528877740.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:41.217Z,1528877741.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:41.596Z,1528877741.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:42.018Z,1528877742.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:42.424Z,1528877742.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:42.818Z,1528877742.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:43.222Z,1528877743.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:43.597Z,1528877743.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:44.023Z,1528877744.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:44.426Z,1528877744.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:44.811Z,1528877744.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:45.203Z,1528877745.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:45.601Z,1528877745.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:46.015Z,1528877746.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:46.412Z,1528877746.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:46.808Z,1528877746.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:47.228Z,1528877747.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:47.603Z,1528877747.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:48.003Z,1528877748.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:48.412Z,1528877748.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:48.812Z,1528877748.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:49.211Z,1528877749.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:49.604Z,1528877749.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:50.001Z,1528877750.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:50.403Z,1528877750.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:50.808Z,1528877750.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:51.208Z,1528877751.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:51.616Z,1528877751.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:52.013Z,1528877752.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:52.402Z,1528877752.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:52.810Z,1528877752.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:53.208Z,1528877753.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:53.601Z,1528877753.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:54.002Z,1528877754.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:54.416Z,1528877754.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:54.814Z,1528877754.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:55.212Z,1528877755.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:55.608Z,1528877755.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:55.000Z,1528877756.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:56.408Z,1528877756.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:56.814Z,1528877756.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:57.213Z,1528877757.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:57.616Z,1528877757.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:58.017Z,1528877758.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:58.400Z,1528877758.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:58.806Z,1528877758.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:59.212Z,1528877759.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:15:59.610Z,1528877759.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:00.004Z,1528877760.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:00.418Z,1528877760.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:00.812Z,1528877760.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:01.214Z,1528877761.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:01.610Z,1528877761.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:02.005Z,1528877762.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:02.411Z,1528877762.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:02.821Z,1528877762.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:03.214Z,1528877763.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:03.628Z,1528877763.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:04.015Z,1528877764.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:04.404Z,1528877764.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:04.807Z,1528877764.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:05.213Z,1528877765.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:05.611Z,1528877765.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:06.016Z,1528877766.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:06.416Z,1528877766.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:06.818Z,1528877766.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:07.214Z,1528877767.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:07.607Z,1528877767.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:08.010Z,1528877768.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:08.406Z,1528877768.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:08.808Z,1528877768.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:09.217Z,1528877769.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:09.616Z,1528877769.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:10.028Z,1528877770.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:10.404Z,1528877770.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:10.804Z,1528877770.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:11.208Z,1528877771.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:11.608Z,1528877771.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:12.012Z,1528877772.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:12.417Z,1528877772.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:12.812Z,1528877772.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:13.221Z,1528877773.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:13.606Z,1528877773.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:14.004Z,1528877774.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:14.409Z,1528877774.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:14.810Z,1528877774.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:15.217Z,1528877775.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:15.615Z,1528877775.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:16.020Z,1528877776.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:16.414Z,1528877776.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:16.808Z,1528877776.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:17.210Z,1528877777.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:17.609Z,1528877777.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:18.012Z,1528877778.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:18.418Z,1528877778.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:18.817Z,1528877778.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:19.215Z,1528877779.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:19.609Z,1528877779.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:20.008Z,1528877780.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:20.409Z,1528877780.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:20.812Z,1528877780.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:21.224Z,1528877781.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:21.616Z,1528877781.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:22.028Z,1528877782.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:22.408Z,1528877782.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:22.808Z,1528877782.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:23.211Z,1528877783.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:23.609Z,1528877783.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:24.008Z,1528877784.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:24.424Z,1528877784.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:24.819Z,1528877784.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:25.221Z,1528877785.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:25.611Z,1528877785.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:26.012Z,1528877786.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:26.411Z,1528877786.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:26.812Z,1528877786.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:29.932Z,1528877789.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:30.116Z,1528877790.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:30.509Z,1528877790.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:30.888Z,1528877790.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:31.288Z,1528877791.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:31.683Z,1528877791.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:32.108Z,1528877792.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:32.507Z,1528877792.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:32.507Z,1528877792.507 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97
2018-06-13T08:16:32.507Z,1528877792.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:16:32.513Z,1528877792.513 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:32.513Z,1528877792.513 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97
2018-06-13T08:16:32.513Z,1528877792.513 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:16:32.515Z,1528877792.515 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:32.515Z,1528877792.515 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 97
2018-06-13T08:16:32.515Z,1528877792.515 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:16:32.605Z,1528877792.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:16:32.605Z,1528877792.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:16:32.605Z,1528877792.605 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:16:33.001Z,1528877793.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:16:33.001Z,1528877793.001 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97
2018-06-13T08:16:33.002Z,1528877793.002 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:16:33.002Z,1528877793.002 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97
2018-06-13T08:16:33.002Z,1528877793.002 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:16:33.002Z,1528877793.002 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 97
2018-06-13T08:16:33.287Z,1528877793.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:16:33.287Z,1528877793.287 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:16:33.288Z,1528877793.288 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:16:33.288Z,1528877793.288 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:16:33.288Z,1528877793.288 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:16:33.289Z,1528877793.289 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:16:33.289Z,1528877793.289 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:16:33.290Z,1528877793.290 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:16:33.290Z,1528877793.290 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:16:33.686Z,1528877793.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:16:33.687Z,1528877793.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:34.099Z,1528877794.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:16:34.100Z,1528877794.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:34.495Z,1528877794.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:16:34.496Z,1528877794.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:34.896Z,1528877794.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:16:34.898Z,1528877794.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:35.287Z,1528877795.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:16:35.288Z,1528877795.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:35.687Z,1528877795.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:16:35.688Z,1528877795.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:36.096Z,1528877796.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:16:36.097Z,1528877796.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:36.495Z,1528877796.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:16:36.496Z,1528877796.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:36.895Z,1528877796.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:16:36.896Z,1528877796.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:37.288Z,1528877797.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:16:37.289Z,1528877797.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:37.687Z,1528877797.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:16:37.688Z,1528877797.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:38.096Z,1528877798.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:16:38.097Z,1528877798.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:38.494Z,1528877798.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:16:38.495Z,1528877798.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:38.921Z,1528877798.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:16:38.922Z,1528877798.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:39.286Z,1528877799.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:16:39.287Z,1528877799.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:39.686Z,1528877799.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:16:39.687Z,1528877799.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:40.095Z,1528877800.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:16:40.096Z,1528877800.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:40.495Z,1528877800.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:16:40.495Z,1528877800.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:40.896Z,1528877800.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:16:40.897Z,1528877800.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:41.287Z,1528877801.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:16:41.288Z,1528877801.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:41.686Z,1528877801.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:16:41.687Z,1528877801.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:42.091Z,1528877802.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:16:42.092Z,1528877802.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:42.499Z,1528877802.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:16:42.500Z,1528877802.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:42.896Z,1528877802.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:16:42.897Z,1528877802.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:43.287Z,1528877803.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:16:43.288Z,1528877803.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:43.686Z,1528877803.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:16:43.687Z,1528877803.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:44.096Z,1528877804.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:16:44.097Z,1528877804.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:44.500Z,1528877804.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:16:44.521Z,1528877804.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:44.894Z,1528877804.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:16:44.895Z,1528877804.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:45.290Z,1528877805.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:16:45.291Z,1528877805.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:45.686Z,1528877805.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:16:45.687Z,1528877805.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:46.095Z,1528877806.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:16:46.096Z,1528877806.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:46.495Z,1528877806.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:16:46.496Z,1528877806.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:46.896Z,1528877806.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:16:46.897Z,1528877806.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:47.292Z,1528877807.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:16:47.293Z,1528877807.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:47.687Z,1528877807.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:16:47.688Z,1528877807.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:48.088Z,1528877808.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:16:48.089Z,1528877808.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:48.494Z,1528877808.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:16:48.495Z,1528877808.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:48.896Z,1528877808.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T08:16:48.897Z,1528877808.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:49.300Z,1528877809.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T08:16:49.317Z,1528877809.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:49.696Z,1528877809.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T08:16:49.697Z,1528877809.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:50.089Z,1528877810.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T08:16:50.090Z,1528877810.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:50.492Z,1528877810.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T08:16:50.493Z,1528877810.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:50.896Z,1528877810.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T08:16:50.897Z,1528877810.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:51.294Z,1528877811.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T08:16:51.295Z,1528877811.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:51.696Z,1528877811.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T08:16:51.697Z,1528877811.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:52.122Z,1528877812.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T08:16:52.123Z,1528877812.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:52.484Z,1528877812.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T08:16:52.485Z,1528877812.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:52.889Z,1528877812.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:53.289Z,1528877813.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:53.684Z,1528877813.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:54.087Z,1528877814.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:54.496Z,1528877814.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:54.895Z,1528877814.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:55.296Z,1528877815.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:55.688Z,1528877815.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:56.087Z,1528877816.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:56.488Z,1528877816.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:56.890Z,1528877816.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:57.291Z,1528877817.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:57.695Z,1528877817.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:58.123Z,1528877818.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:58.484Z,1528877818.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:58.886Z,1528877818.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:59.288Z,1528877819.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:16:59.692Z,1528877819.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:00.086Z,1528877820.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:00.495Z,1528877820.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:00.900Z,1528877820.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:01.295Z,1528877821.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:01.692Z,1528877821.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:02.086Z,1528877822.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:02.497Z,1528877822.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:02.896Z,1528877822.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:03.296Z,1528877823.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:03.697Z,1528877823.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:04.096Z,1528877824.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:04.489Z,1528877824.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:04.886Z,1528877824.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:05.288Z,1528877825.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:05.688Z,1528877825.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:06.094Z,1528877826.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:06.500Z,1528877826.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:06.900Z,1528877826.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:07.295Z,1528877827.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:07.690Z,1528877827.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:08.086Z,1528877828.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:08.496Z,1528877828.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:08.900Z,1528877828.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:09.302Z,1528877829.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:09.705Z,1528877829.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:10.106Z,1528877830.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:10.494Z,1528877830.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:10.891Z,1528877830.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:11.296Z,1528877831.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:11.693Z,1528877831.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:12.092Z,1528877832.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:12.503Z,1528877832.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:12.901Z,1528877832.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:13.301Z,1528877833.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:13.700Z,1528877833.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:14.090Z,1528877834.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:14.492Z,1528877834.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:14.895Z,1528877834.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:15.299Z,1528877835.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:15.703Z,1528877835.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:16.102Z,1528877836.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:16.492Z,1528877836.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:16.892Z,1528877836.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:17.296Z,1528877837.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:17.691Z,1528877837.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:18.096Z,1528877838.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:18.506Z,1528877838.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:18.908Z,1528877838.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:19.308Z,1528877839.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:19.700Z,1528877839.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:20.100Z,1528877840.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:20.496Z,1528877840.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:20.896Z,1528877840.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:21.301Z,1528877841.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:21.705Z,1528877841.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:22.106Z,1528877842.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:22.500Z,1528877842.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:22.899Z,1528877842.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:23.304Z,1528877843.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:23.694Z,1528877843.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:24.097Z,1528877844.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:24.506Z,1528877844.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:24.905Z,1528877844.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:25.303Z,1528877845.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:25.699Z,1528877845.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:26.095Z,1528877846.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:26.494Z,1528877846.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:26.901Z,1528877846.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:30.012Z,1528877850.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:30.169Z,1528877850.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:30.565Z,1528877850.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:30.953Z,1528877850.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:31.348Z,1528877851.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:31.751Z,1528877851.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:32.149Z,1528877852.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:32.556Z,1528877852.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:32.962Z,1528877852.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:33.362Z,1528877853.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:33.753Z,1528877853.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:34.152Z,1528877854.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:34.560Z,1528877854.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:34.956Z,1528877854.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:35.363Z,1528877855.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:35.763Z,1528877855.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:36.168Z,1528877856.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:36.567Z,1528877856.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:36.965Z,1528877856.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:37.365Z,1528877857.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:37.769Z,1528877857.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:38.146Z,1528877858.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:38.575Z,1528877858.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:38.979Z,1528877858.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:39.355Z,1528877859.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:39.752Z,1528877859.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:40.148Z,1528877860.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:40.547Z,1528877860.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:40.946Z,1528877860.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:41.355Z,1528877861.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:41.756Z,1528877861.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:42.156Z,1528877862.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:42.559Z,1528877862.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:42.947Z,1528877862.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:43.350Z,1528877863.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:43.749Z,1528877863.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:44.152Z,1528877864.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:44.559Z,1528877864.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:44.959Z,1528877864.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:45.356Z,1528877865.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:45.746Z,1528877865.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:46.150Z,1528877866.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:46.547Z,1528877866.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:46.946Z,1528877866.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:47.357Z,1528877867.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:47.760Z,1528877867.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:48.160Z,1528877868.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:48.552Z,1528877868.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:48.946Z,1528877868.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:49.356Z,1528877869.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:49.752Z,1528877869.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:50.146Z,1528877870.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:50.555Z,1528877870.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:50.958Z,1528877870.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:51.357Z,1528877871.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:51.746Z,1528877871.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:52.148Z,1528877872.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:52.558Z,1528877872.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:52.947Z,1528877872.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:53.362Z,1528877873.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:53.760Z,1528877873.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:54.164Z,1528877874.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:54.551Z,1528877874.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:54.950Z,1528877874.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:55.346Z,1528877875.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:55.755Z,1528877875.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:56.148Z,1528877876.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:56.564Z,1528877876.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:56.961Z,1528877876.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:57.361Z,1528877877.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:57.750Z,1528877877.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:58.155Z,1528877878.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:58.547Z,1528877878.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:58.953Z,1528877878.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:59.371Z,1528877879.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:17:59.764Z,1528877879.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:00.161Z,1528877880.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:00.556Z,1528877880.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:00.949Z,1528877880.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:01.353Z,1528877881.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:01.752Z,1528877881.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:02.150Z,1528877882.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:02.561Z,1528877882.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:02.963Z,1528877882.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:03.361Z,1528877883.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:03.756Z,1528877883.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:04.155Z,1528877884.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:04.547Z,1528877884.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:04.951Z,1528877884.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:05.372Z,1528877885.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:05.764Z,1528877885.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:06.159Z,1528877886.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:06.564Z,1528877886.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:06.971Z,1528877886.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:07.368Z,1528877887.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:07.764Z,1528877887.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:08.147Z,1528877888.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:08.560Z,1528877888.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:08.965Z,1528877888.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:09.359Z,1528877889.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:09.756Z,1528877889.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:10.168Z,1528877890.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:10.559Z,1528877890.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:10.952Z,1528877890.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:11.369Z,1528877891.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:11.776Z,1528877891.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:12.180Z,1528877892.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:12.569Z,1528877892.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:12.954Z,1528877892.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:13.357Z,1528877893.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:13.748Z,1528877893.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:14.158Z,1528877894.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:14.567Z,1528877894.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:14.984Z,1528877894.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:15.384Z,1528877895.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:15.756Z,1528877895.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:16.158Z,1528877896.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:16.564Z,1528877896.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:16.960Z,1528877896.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:17.368Z,1528877897.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:17.769Z,1528877897.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:18.168Z,1528877898.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:18.536Z,1528877898.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:18.940Z,1528877898.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:19.371Z,1528877899.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:19.773Z,1528877899.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:20.140Z,1528877900.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:20.573Z,1528877900.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:20.976Z,1528877900.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:21.380Z,1528877901.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:21.743Z,1528877901.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:22.149Z,1528877902.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:22.548Z,1528877902.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:22.943Z,1528877902.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:23.376Z,1528877903.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:23.756Z,1528877903.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:24.156Z,1528877904.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:24.578Z,1528877904.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:24.946Z,1528877904.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:25.356Z,1528877905.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:25.752Z,1528877905.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:26.146Z,1528877906.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:26.576Z,1528877906.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:26.984Z,1528877906.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:30.080Z,1528877910.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:30.239Z,1528877910.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:30.631Z,1528877910.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:31.030Z,1528877911.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:31.434Z,1528877911.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:31.840Z,1528877911.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:32.229Z,1528877912.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:32.630Z,1528877912.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:33.032Z,1528877913.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:33.434Z,1528877913.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:33.832Z,1528877913.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:34.232Z,1528877914.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:34.636Z,1528877914.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:35.044Z,1528877915.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:35.434Z,1528877915.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:35.831Z,1528877915.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:36.231Z,1528877916.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:36.633Z,1528877916.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:37.030Z,1528877917.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:37.439Z,1528877917.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:37.837Z,1528877917.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:38.240Z,1528877918.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:38.634Z,1528877918.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:39.037Z,1528877919.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:39.432Z,1528877919.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:39.838Z,1528877919.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:40.213Z,1528877920.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:40.642Z,1528877920.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:41.048Z,1528877921.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:41.445Z,1528877921.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:41.817Z,1528877921.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:42.219Z,1528877922.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:42.645Z,1528877922.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:43.044Z,1528877923.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:43.447Z,1528877923.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:43.853Z,1528877923.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:44.248Z,1528877924.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:44.621Z,1528877924.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:45.020Z,1528877925.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:45.421Z,1528877925.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:45.823Z,1528877925.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:46.228Z,1528877926.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:46.655Z,1528877926.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:47.030Z,1528877927.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:47.428Z,1528877927.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:47.823Z,1528877927.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:48.224Z,1528877928.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:48.628Z,1528877928.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:49.020Z,1528877929.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:49.424Z,1528877929.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:49.857Z,1528877929.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:50.228Z,1528877930.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:50.621Z,1528877930.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:51.026Z,1528877931.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:51.422Z,1528877931.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:51.826Z,1528877931.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:52.227Z,1528877932.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:52.630Z,1528877932.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:53.027Z,1528877933.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:53.453Z,1528877933.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:53.823Z,1528877933.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:54.223Z,1528877934.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:54.634Z,1528877934.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:55.036Z,1528877935.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:55.454Z,1528877935.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:55.840Z,1528877935.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:56.232Z,1528877936.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:56.640Z,1528877936.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:57.029Z,1528877937.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:57.425Z,1528877937.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:57.830Z,1528877937.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:58.262Z,1528877938.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:58.662Z,1528877938.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:59.047Z,1528877939.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:59.441Z,1528877939.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:18:59.827Z,1528877939.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:00.237Z,1528877940.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:00.631Z,1528877940.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:01.032Z,1528877941.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:01.439Z,1528877941.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:01.851Z,1528877941.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:02.246Z,1528877942.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:02.639Z,1528877942.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:03.046Z,1528877943.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:03.410Z,1528877943.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:03.843Z,1528877943.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:04.221Z,1528877944.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:04.646Z,1528877944.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:05.050Z,1528877945.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:05.432Z,1528877945.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:05.820Z,1528877945.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:06.244Z,1528877946.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:06.625Z,1528877946.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:07.024Z,1528877947.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:07.432Z,1528877947.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:07.855Z,1528877947.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:08.230Z,1528877948.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:08.625Z,1528877948.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:09.035Z,1528877949.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:09.428Z,1528877949.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:09.827Z,1528877949.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:10.229Z,1528877950.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:10.631Z,1528877950.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:11.056Z,1528877951.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:11.439Z,1528877951.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:11.823Z,1528877951.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:12.226Z,1528877952.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:12.622Z,1528877952.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:13.019Z,1528877953.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:13.433Z,1528877953.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:13.834Z,1528877953.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:14.259Z,1528877954.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:14.624Z,1528877954.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:15.030Z,1528877955.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:15.430Z,1528877955.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:15.826Z,1528877955.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:16.235Z,1528877956.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:16.648Z,1528877956.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:17.040Z,1528877957.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:17.459Z,1528877957.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:17.821Z,1528877957.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:18.239Z,1528877958.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:18.631Z,1528877958.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:19.036Z,1528877959.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:19.448Z,1528877959.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:19.847Z,1528877959.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:20.245Z,1528877960.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:20.637Z,1528877960.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:21.016Z,1528877961.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:21.420Z,1528877961.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:21.816Z,1528877961.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:22.217Z,1528877962.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:22.624Z,1528877962.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:23.027Z,1528877963.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:23.452Z,1528877963.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:23.819Z,1528877963.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:24.221Z,1528877964.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:24.621Z,1528877964.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:25.021Z,1528877965.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:25.429Z,1528877965.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:25.432Z,1528877965.432 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T08:19:25.432Z,1528877965.432 [Default:CheckIn:C.Wait] Stopped
2018-06-13T08:19:25.432Z,1528877965.432 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T08:19:25.432Z,1528877965.432 [Default:CheckIn:D] Running Loop=1
2018-06-13T08:19:25.836Z,1528877965.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:25.839Z,1528877965.839 [Default:CheckIn:D] Stopped
2018-06-13T08:19:25.839Z,1528877965.839 [Default:CheckIn:E] Running Loop=1
2018-06-13T08:19:28.940Z,1528877968.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:28.943Z,1528877968.943 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 292.206576 min 
2018-06-13T08:19:28.943Z,1528877968.943 [Default:CheckIn:E] Stopped
2018-06-13T08:19:28.944Z,1528877968.944 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T08:19:28.944Z,1528877968.944 [Default:CheckIn] Stopped
2018-06-13T08:19:28.944Z,1528877968.944 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T08:19:28.944Z,1528877968.944 [Default:CheckIn](INFO): Running loop #29
2018-06-13T08:19:28.944Z,1528877968.944 [Default:CheckIn] Running Loop=29
2018-06-13T08:19:28.944Z,1528877968.944 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T08:19:28.944Z,1528877968.944 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T08:19:29.099Z,1528877969.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:29.491Z,1528877969.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:29.898Z,1528877969.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:30.293Z,1528877970.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:30.700Z,1528877970.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:31.118Z,1528877971.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:31.520Z,1528877971.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:31.894Z,1528877971.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:32.292Z,1528877972.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:32.694Z,1528877972.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:33.092Z,1528877973.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:33.499Z,1528877973.499 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:33.499Z,1528877973.499 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98
2018-06-13T08:19:33.499Z,1528877973.499 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:19:33.513Z,1528877973.513 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:33.513Z,1528877973.513 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98
2018-06-13T08:19:33.513Z,1528877973.513 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:19:33.515Z,1528877973.515 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:33.515Z,1528877973.515 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 98
2018-06-13T08:19:33.515Z,1528877973.515 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:19:33.601Z,1528877973.601 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:19:33.601Z,1528877973.601 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:19:33.601Z,1528877973.601 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:19:33.997Z,1528877973.997 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:19:33.997Z,1528877973.997 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98
2018-06-13T08:19:33.998Z,1528877973.998 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:19:33.998Z,1528877973.998 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98
2018-06-13T08:19:33.998Z,1528877973.998 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:19:33.998Z,1528877973.998 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 98
2018-06-13T08:19:34.298Z,1528877974.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:19:34.299Z,1528877974.299 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:19:34.299Z,1528877974.299 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:19:34.299Z,1528877974.299 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:19:34.300Z,1528877974.300 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:19:34.300Z,1528877974.300 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:19:34.301Z,1528877974.301 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:19:34.301Z,1528877974.301 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:19:34.301Z,1528877974.301 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:19:34.692Z,1528877974.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:19:34.693Z,1528877974.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:35.096Z,1528877975.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:19:35.097Z,1528877975.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:35.506Z,1528877975.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:19:35.507Z,1528877975.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:35.888Z,1528877975.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:19:35.890Z,1528877975.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:36.294Z,1528877976.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:19:36.295Z,1528877976.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:36.708Z,1528877976.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:19:36.725Z,1528877976.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:37.108Z,1528877977.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:19:37.109Z,1528877977.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:37.501Z,1528877977.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:19:37.502Z,1528877977.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:37.905Z,1528877977.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:19:37.906Z,1528877977.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:38.308Z,1528877978.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:19:38.308Z,1528877978.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:38.712Z,1528877978.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:19:38.712Z,1528877978.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:39.096Z,1528877979.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:19:39.097Z,1528877979.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:39.499Z,1528877979.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:19:39.500Z,1528877979.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:39.903Z,1528877979.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:19:39.904Z,1528877979.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:40.308Z,1528877980.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:19:40.309Z,1528877980.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:40.694Z,1528877980.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:19:40.695Z,1528877980.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:41.096Z,1528877981.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:19:41.097Z,1528877981.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:41.508Z,1528877981.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:19:41.508Z,1528877981.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:41.912Z,1528877981.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:19:41.912Z,1528877981.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:42.296Z,1528877982.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:19:42.297Z,1528877982.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:42.708Z,1528877982.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:19:42.709Z,1528877982.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:43.131Z,1528877983.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:19:43.132Z,1528877983.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:43.508Z,1528877983.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:19:43.509Z,1528877983.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:43.908Z,1528877983.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:19:43.909Z,1528877983.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:44.292Z,1528877984.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:19:44.293Z,1528877984.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:44.708Z,1528877984.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:19:44.709Z,1528877984.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:45.110Z,1528877985.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:19:45.111Z,1528877985.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:45.509Z,1528877985.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:19:45.510Z,1528877985.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:45.906Z,1528877985.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:19:45.907Z,1528877985.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:46.311Z,1528877986.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:19:46.312Z,1528877986.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:46.712Z,1528877986.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:19:46.713Z,1528877986.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:47.116Z,1528877987.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:19:47.116Z,1528877987.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:47.496Z,1528877987.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:19:47.497Z,1528877987.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:47.908Z,1528877987.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:19:47.909Z,1528877987.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:48.298Z,1528877988.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:19:48.299Z,1528877988.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:48.716Z,1528877988.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:19:48.716Z,1528877988.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:49.125Z,1528877989.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:19:49.127Z,1528877989.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:49.520Z,1528877989.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:19:49.537Z,1528877989.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:49.902Z,1528877989.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T08:19:49.903Z,1528877989.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:50.296Z,1528877990.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T08:19:50.298Z,1528877990.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:50.699Z,1528877990.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T08:19:50.700Z,1528877990.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:51.110Z,1528877991.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T08:19:51.111Z,1528877991.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:51.502Z,1528877991.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T08:19:51.503Z,1528877991.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:51.908Z,1528877991.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T08:19:51.908Z,1528877991.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:52.308Z,1528877992.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T08:19:52.309Z,1528877992.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:52.711Z,1528877992.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T08:19:52.712Z,1528877992.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:53.095Z,1528877993.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T08:19:53.097Z,1528877993.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:53.500Z,1528877993.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:53.897Z,1528877993.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:54.313Z,1528877994.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:54.711Z,1528877994.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:55.108Z,1528877995.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:55.518Z,1528877995.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:55.898Z,1528877995.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:56.310Z,1528877996.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:56.698Z,1528877996.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:57.106Z,1528877997.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:57.519Z,1528877997.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:57.920Z,1528877997.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:58.324Z,1528877998.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:58.711Z,1528877998.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:59.088Z,1528877999.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:59.489Z,1528877999.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:19:59.885Z,1528877999.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:00.293Z,1528878000.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:00.699Z,1528878000.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:01.099Z,1528878001.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:01.501Z,1528878001.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:01.896Z,1528878001.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:02.288Z,1528878002.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:02.689Z,1528878002.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:03.091Z,1528878003.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:03.499Z,1528878003.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:03.899Z,1528878003.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:04.299Z,1528878004.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:04.688Z,1528878004.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:05.097Z,1528878005.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:05.492Z,1528878005.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:05.888Z,1528878005.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:06.296Z,1528878006.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:06.705Z,1528878006.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:07.096Z,1528878007.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:07.496Z,1528878007.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:07.906Z,1528878007.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:08.288Z,1528878008.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:08.692Z,1528878008.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:09.102Z,1528878009.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:09.499Z,1528878009.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:09.908Z,1528878009.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:10.300Z,1528878010.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:10.688Z,1528878010.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:11.097Z,1528878011.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:11.492Z,1528878011.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:11.892Z,1528878011.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:12.302Z,1528878012.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:12.716Z,1528878012.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:13.114Z,1528878013.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:13.501Z,1528878013.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:13.905Z,1528878013.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:14.298Z,1528878014.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:14.693Z,1528878014.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:15.095Z,1528878015.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:15.501Z,1528878015.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:15.912Z,1528878015.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:16.308Z,1528878016.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:16.698Z,1528878016.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:17.098Z,1528878017.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:17.500Z,1528878017.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:17.897Z,1528878017.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:18.296Z,1528878018.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:18.707Z,1528878018.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:19.108Z,1528878019.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:19.508Z,1528878019.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:19.905Z,1528878019.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:20.308Z,1528878020.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:20.704Z,1528878020.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:21.094Z,1528878021.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:21.491Z,1528878021.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:21.921Z,1528878021.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:22.299Z,1528878022.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:22.691Z,1528878022.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:23.088Z,1528878023.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:23.493Z,1528878023.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:23.897Z,1528878023.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:24.293Z,1528878024.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:24.717Z,1528878024.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:25.096Z,1528878025.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:25.508Z,1528878025.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:25.893Z,1528878025.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:29.003Z,1528878029.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:29.155Z,1528878029.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:29.551Z,1528878029.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:29.958Z,1528878029.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:30.361Z,1528878030.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:30.745Z,1528878030.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:31.125Z,1528878031.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:31.526Z,1528878031.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:31.928Z,1528878031.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:32.327Z,1528878032.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:32.773Z,1528878032.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:33.135Z,1528878033.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:33.538Z,1528878033.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:33.932Z,1528878033.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:34.331Z,1528878034.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:34.729Z,1528878034.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:35.131Z,1528878035.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:35.546Z,1528878035.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:35.939Z,1528878035.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:36.344Z,1528878036.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:36.731Z,1528878036.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:37.127Z,1528878037.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:37.530Z,1528878037.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:37.941Z,1528878037.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:38.332Z,1528878038.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:38.749Z,1528878038.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:39.144Z,1528878039.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:39.536Z,1528878039.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:39.932Z,1528878039.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:40.335Z,1528878040.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:40.729Z,1528878040.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:41.134Z,1528878041.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:41.545Z,1528878041.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:41.945Z,1528878041.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:42.340Z,1528878042.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:42.730Z,1528878042.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:43.133Z,1528878043.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:43.533Z,1528878043.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:43.935Z,1528878043.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:44.332Z,1528878044.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:44.690Z,1528878044.690 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T08:20:44.691Z,1528878044.691 [NAL9602] Data Fault, FailCount= 2
2018-06-13T08:20:44.691Z,1528878044.691 [NAL9602](ERROR): Data Fault
2018-06-13T08:20:44.752Z,1528878044.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:44.841Z,1528878044.841 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T08:20:45.086Z,1528878045.086 [NAL9602](INFO): Powering down
2018-06-13T08:20:45.151Z,1528878045.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:45.539Z,1528878045.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:45.932Z,1528878045.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:46.013Z,1528878046.013 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T08:20:46.013Z,1528878046.013 [NAL9602] No Fault, FailCount= 2
2018-06-13T08:20:46.324Z,1528878046.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:46.724Z,1528878046.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:47.124Z,1528878047.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:47.523Z,1528878047.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:47.927Z,1528878047.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:48.328Z,1528878048.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:48.727Z,1528878048.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:49.127Z,1528878049.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:49.527Z,1528878049.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:49.923Z,1528878049.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:50.327Z,1528878050.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:50.727Z,1528878050.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:51.123Z,1528878051.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:51.527Z,1528878051.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:51.928Z,1528878051.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:52.322Z,1528878052.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:52.732Z,1528878052.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:53.127Z,1528878053.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:53.523Z,1528878053.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:53.927Z,1528878053.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:54.327Z,1528878054.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:54.723Z,1528878054.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:55.127Z,1528878055.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:55.527Z,1528878055.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:55.925Z,1528878055.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:56.327Z,1528878056.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:56.728Z,1528878056.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:57.125Z,1528878057.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:57.528Z,1528878057.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:57.927Z,1528878057.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:58.325Z,1528878058.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:58.727Z,1528878058.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:59.127Z,1528878059.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:59.526Z,1528878059.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:20:59.927Z,1528878059.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:00.327Z,1528878060.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:00.726Z,1528878060.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:01.127Z,1528878061.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:01.528Z,1528878061.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:01.926Z,1528878061.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:02.332Z,1528878062.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:02.727Z,1528878062.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:03.128Z,1528878063.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:03.528Z,1528878063.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:03.927Z,1528878063.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:04.329Z,1528878064.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:04.738Z,1528878064.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:05.132Z,1528878065.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:05.532Z,1528878065.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:05.931Z,1528878065.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:06.338Z,1528878066.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:06.731Z,1528878066.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:07.131Z,1528878067.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:07.532Z,1528878067.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:07.935Z,1528878067.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:08.331Z,1528878068.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:08.732Z,1528878068.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:09.135Z,1528878069.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:09.530Z,1528878069.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:09.932Z,1528878069.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:10.340Z,1528878070.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:10.726Z,1528878070.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:11.133Z,1528878071.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:11.530Z,1528878071.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:11.931Z,1528878071.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:12.330Z,1528878072.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:12.737Z,1528878072.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:13.126Z,1528878073.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:13.530Z,1528878073.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:13.934Z,1528878073.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:14.329Z,1528878074.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:14.731Z,1528878074.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:15.090Z,1528878075.090 [NAL9602](INFO): Powering up NAL9602
2018-06-13T08:21:15.140Z,1528878075.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:15.526Z,1528878075.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:15.932Z,1528878075.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:16.329Z,1528878076.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:16.730Z,1528878076.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:17.131Z,1528878077.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:17.536Z,1528878077.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:17.968Z,1528878077.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:18.336Z,1528878078.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:18.734Z,1528878078.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:19.129Z,1528878079.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:19.532Z,1528878079.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:19.936Z,1528878079.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:20.330Z,1528878080.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:20.736Z,1528878080.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:21.129Z,1528878081.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:21.528Z,1528878081.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:21.930Z,1528878081.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:22.336Z,1528878082.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:22.728Z,1528878082.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:23.130Z,1528878083.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:23.530Z,1528878083.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:23.928Z,1528878083.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:24.330Z,1528878084.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:24.736Z,1528878084.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:25.130Z,1528878085.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:25.535Z,1528878085.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:25.939Z,1528878085.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:29.003Z,1528878089.003 [NAL9602](INFO): NAL9602 initialized
2018-06-13T08:21:29.047Z,1528878089.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:29.220Z,1528878089.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:29.623Z,1528878089.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:30.007Z,1528878090.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:30.404Z,1528878090.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:30.795Z,1528878090.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:31.192Z,1528878091.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:31.596Z,1528878091.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:32.003Z,1528878092.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:32.404Z,1528878092.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:32.804Z,1528878092.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:33.195Z,1528878093.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:33.592Z,1528878093.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:33.996Z,1528878093.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:34.405Z,1528878094.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:34.804Z,1528878094.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:35.204Z,1528878095.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:35.605Z,1528878095.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:35.995Z,1528878095.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:36.404Z,1528878096.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:36.809Z,1528878096.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:37.204Z,1528878097.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:37.604Z,1528878097.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:37.996Z,1528878097.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:38.400Z,1528878098.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:38.805Z,1528878098.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:39.216Z,1528878099.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:39.601Z,1528878099.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:39.997Z,1528878099.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:40.412Z,1528878100.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:40.805Z,1528878100.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:41.208Z,1528878101.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:41.620Z,1528878101.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:42.001Z,1528878102.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:42.408Z,1528878102.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:42.813Z,1528878102.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:43.216Z,1528878103.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:43.614Z,1528878103.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:44.016Z,1528878104.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:44.392Z,1528878104.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:44.819Z,1528878104.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:45.204Z,1528878105.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:45.599Z,1528878105.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:45.996Z,1528878105.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:46.397Z,1528878106.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:46.804Z,1528878106.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:47.203Z,1528878107.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:47.607Z,1528878107.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:47.998Z,1528878107.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:48.396Z,1528878108.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:48.803Z,1528878108.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:49.202Z,1528878109.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:49.604Z,1528878109.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:49.999Z,1528878109.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:50.403Z,1528878110.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:50.801Z,1528878110.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:51.204Z,1528878111.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:51.604Z,1528878111.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:51.997Z,1528878111.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:52.400Z,1528878112.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:52.804Z,1528878112.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:53.203Z,1528878113.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:53.603Z,1528878113.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:53.995Z,1528878113.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:54.396Z,1528878114.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:54.805Z,1528878114.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:55.204Z,1528878115.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:55.604Z,1528878115.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:55.997Z,1528878115.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:56.397Z,1528878116.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:56.802Z,1528878116.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:57.204Z,1528878117.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:57.603Z,1528878117.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:57.998Z,1528878117.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:58.407Z,1528878118.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:58.800Z,1528878118.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:59.203Z,1528878119.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:59.612Z,1528878119.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:21:59.995Z,1528878119.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:00.396Z,1528878120.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:00.805Z,1528878120.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:01.203Z,1528878121.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:01.604Z,1528878121.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:01.000Z,1528878122.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:02.400Z,1528878122.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:02.795Z,1528878122.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:03.214Z,1528878123.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:03.604Z,1528878123.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:04.004Z,1528878124.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:04.397Z,1528878124.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:04.794Z,1528878124.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:05.197Z,1528878125.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:05.599Z,1528878125.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:06.003Z,1528878126.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:06.404Z,1528878126.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:06.804Z,1528878126.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:07.204Z,1528878127.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:07.594Z,1528878127.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:07.996Z,1528878127.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:08.393Z,1528878128.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:08.800Z,1528878128.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:09.213Z,1528878129.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:09.604Z,1528878129.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:10.004Z,1528878130.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:10.395Z,1528878130.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:10.792Z,1528878130.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:11.196Z,1528878131.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:11.599Z,1528878131.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:12.004Z,1528878132.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:12.404Z,1528878132.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:12.804Z,1528878132.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:13.193Z,1528878133.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:13.595Z,1528878133.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:14.008Z,1528878134.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:14.395Z,1528878134.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:14.796Z,1528878134.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:15.209Z,1528878135.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:15.604Z,1528878135.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:16.004Z,1528878136.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:16.399Z,1528878136.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:16.802Z,1528878136.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:17.195Z,1528878137.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:17.599Z,1528878137.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:18.006Z,1528878138.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:18.407Z,1528878138.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:18.810Z,1528878138.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:19.192Z,1528878139.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:19.594Z,1528878139.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:19.996Z,1528878139.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:20.393Z,1528878140.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:20.800Z,1528878140.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:21.209Z,1528878141.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:21.612Z,1528878141.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:22.004Z,1528878142.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:22.399Z,1528878142.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:22.792Z,1528878142.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:23.195Z,1528878143.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:23.608Z,1528878143.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:24.005Z,1528878144.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:24.408Z,1528878144.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:24.810Z,1528878144.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:25.192Z,1528878145.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:25.600Z,1528878145.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:26.000Z,1528878146.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:29.105Z,1528878149.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:29.265Z,1528878149.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:29.654Z,1528878149.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:30.049Z,1528878150.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:30.446Z,1528878150.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:30.839Z,1528878150.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:31.247Z,1528878151.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:31.639Z,1528878151.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:32.050Z,1528878152.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:32.458Z,1528878152.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:32.847Z,1528878152.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:33.241Z,1528878153.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:33.649Z,1528878153.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:34.028Z,1528878154.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:34.430Z,1528878154.430 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:34.430Z,1528878154.430 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99
2018-06-13T08:22:34.430Z,1528878154.430 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:22:34.431Z,1528878154.431 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:34.432Z,1528878154.432 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99
2018-06-13T08:22:34.432Z,1528878154.432 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:22:34.454Z,1528878154.454 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:34.454Z,1528878154.454 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 99
2018-06-13T08:22:34.454Z,1528878154.454 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:22:34.541Z,1528878154.541 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:22:34.541Z,1528878154.541 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:22:34.541Z,1528878154.541 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:22:34.906Z,1528878154.906 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:22:34.906Z,1528878154.906 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99
2018-06-13T08:22:34.906Z,1528878154.906 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:22:34.906Z,1528878154.906 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99
2018-06-13T08:22:34.907Z,1528878154.907 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:22:34.907Z,1528878154.907 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 99
2018-06-13T08:22:35.255Z,1528878155.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:22:35.255Z,1528878155.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:22:35.255Z,1528878155.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:22:35.256Z,1528878155.256 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:22:35.256Z,1528878155.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:22:35.257Z,1528878155.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:22:35.257Z,1528878155.257 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:22:35.258Z,1528878155.258 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:22:35.258Z,1528878155.258 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:22:35.669Z,1528878155.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:22:35.670Z,1528878155.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:36.042Z,1528878156.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:22:36.043Z,1528878156.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:36.435Z,1528878156.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:22:36.435Z,1528878156.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:36.834Z,1528878156.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:22:36.835Z,1528878156.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:37.231Z,1528878157.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:22:37.232Z,1528878157.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:37.633Z,1528878157.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:22:37.634Z,1528878157.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:38.042Z,1528878158.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:22:38.043Z,1528878158.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:38.440Z,1528878158.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:22:38.441Z,1528878158.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:38.839Z,1528878158.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:22:38.840Z,1528878158.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:39.235Z,1528878159.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:22:39.236Z,1528878159.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:39.632Z,1528878159.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:22:39.633Z,1528878159.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:40.040Z,1528878160.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:22:40.045Z,1528878160.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:40.431Z,1528878160.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:22:40.432Z,1528878160.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:40.840Z,1528878160.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:22:40.841Z,1528878160.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:41.244Z,1528878161.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:22:41.245Z,1528878161.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:41.647Z,1528878161.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:22:41.648Z,1528878161.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:42.040Z,1528878162.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:22:42.041Z,1528878162.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:42.435Z,1528878162.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:22:42.436Z,1528878162.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:42.830Z,1528878162.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:22:42.831Z,1528878162.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:43.240Z,1528878163.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:22:43.240Z,1528878163.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:43.636Z,1528878163.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:22:43.637Z,1528878163.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:44.048Z,1528878164.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:22:44.049Z,1528878164.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:44.444Z,1528878164.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:22:44.445Z,1528878164.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:44.848Z,1528878164.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:22:44.849Z,1528878164.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:45.234Z,1528878165.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:22:45.235Z,1528878165.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:45.632Z,1528878165.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:22:45.633Z,1528878165.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:46.044Z,1528878166.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:22:46.049Z,1528878166.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:46.438Z,1528878166.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:22:46.439Z,1528878166.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:46.836Z,1528878166.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:22:46.836Z,1528878166.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:47.244Z,1528878167.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:22:47.245Z,1528878167.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:47.644Z,1528878167.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:22:47.644Z,1528878167.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:48.041Z,1528878168.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:22:48.042Z,1528878168.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:48.436Z,1528878168.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:22:48.437Z,1528878168.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:48.838Z,1528878168.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:22:48.839Z,1528878168.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:49.236Z,1528878169.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:22:49.238Z,1528878169.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:49.636Z,1528878169.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:22:49.641Z,1528878169.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:50.050Z,1528878170.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:22:50.051Z,1528878170.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:50.449Z,1528878170.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:22:50.450Z,1528878170.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:50.849Z,1528878170.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T08:22:50.850Z,1528878170.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:51.249Z,1528878171.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T08:22:51.250Z,1528878171.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:51.644Z,1528878171.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T08:22:51.649Z,1528878171.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:52.028Z,1528878172.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T08:22:52.045Z,1528878172.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:52.424Z,1528878172.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T08:22:52.425Z,1528878172.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:52.829Z,1528878172.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T08:22:52.830Z,1528878172.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:53.254Z,1528878173.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T08:22:53.255Z,1528878173.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:53.663Z,1528878173.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T08:22:53.664Z,1528878173.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:54.054Z,1528878174.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T08:22:54.055Z,1528878174.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:54.436Z,1528878174.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:54.832Z,1528878174.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:55.236Z,1528878175.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:55.636Z,1528878175.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:56.062Z,1528878176.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:56.458Z,1528878176.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:56.843Z,1528878176.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:57.234Z,1528878177.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:57.635Z,1528878177.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:58.033Z,1528878178.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:58.436Z,1528878178.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:58.833Z,1528878178.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:59.239Z,1528878179.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:22:59.643Z,1528878179.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:00.039Z,1528878180.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:00.434Z,1528878180.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:00.831Z,1528878180.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:01.234Z,1528878181.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:01.634Z,1528878181.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:02.043Z,1528878182.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:02.443Z,1528878182.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:02.839Z,1528878182.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:03.235Z,1528878183.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:03.640Z,1528878183.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:04.034Z,1528878184.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:04.437Z,1528878184.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:04.834Z,1528878184.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:05.239Z,1528878185.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:05.642Z,1528878185.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:06.039Z,1528878186.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:06.434Z,1528878186.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:06.835Z,1528878186.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:07.239Z,1528878187.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:07.634Z,1528878187.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:08.043Z,1528878188.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:08.439Z,1528878188.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:08.863Z,1528878188.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:09.253Z,1528878189.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:09.635Z,1528878189.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:10.035Z,1528878190.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:10.446Z,1528878190.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:10.833Z,1528878190.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:11.246Z,1528878191.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:11.656Z,1528878191.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:12.045Z,1528878192.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:12.440Z,1528878192.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:12.854Z,1528878192.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:13.240Z,1528878193.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:13.640Z,1528878193.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:14.056Z,1528878194.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:14.448Z,1528878194.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:14.844Z,1528878194.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:15.245Z,1528878195.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:15.642Z,1528878195.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:16.049Z,1528878196.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:16.443Z,1528878196.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:16.828Z,1528878196.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:17.254Z,1528878197.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:17.660Z,1528878197.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:18.055Z,1528878198.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:18.428Z,1528878198.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:18.830Z,1528878198.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:19.232Z,1528878199.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:19.636Z,1528878199.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:20.058Z,1528878200.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:20.459Z,1528878200.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:20.859Z,1528878200.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:21.232Z,1528878201.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:21.632Z,1528878201.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:22.031Z,1528878202.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:22.433Z,1528878202.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:22.834Z,1528878202.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:23.263Z,1528878203.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:23.643Z,1528878203.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:24.040Z,1528878204.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:24.434Z,1528878204.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:24.834Z,1528878204.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:25.235Z,1528878205.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:25.634Z,1528878205.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:26.043Z,1528878206.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:26.447Z,1528878206.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:26.847Z,1528878206.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:27.236Z,1528878207.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:30.342Z,1528878210.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:30.520Z,1528878210.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:30.915Z,1528878210.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:31.318Z,1528878211.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:31.695Z,1528878211.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:32.096Z,1528878212.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:32.488Z,1528878212.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:32.889Z,1528878212.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:33.299Z,1528878213.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:33.695Z,1528878213.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:34.095Z,1528878214.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:34.492Z,1528878214.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:34.887Z,1528878214.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:35.291Z,1528878215.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:35.696Z,1528878215.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:36.096Z,1528878216.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:36.503Z,1528878216.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:36.899Z,1528878216.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:37.287Z,1528878217.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:37.696Z,1528878217.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:38.091Z,1528878218.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:38.487Z,1528878218.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:38.889Z,1528878218.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:39.304Z,1528878219.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:39.699Z,1528878219.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:40.094Z,1528878220.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:40.491Z,1528878220.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:40.888Z,1528878220.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:41.292Z,1528878221.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:41.691Z,1528878221.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:42.097Z,1528878222.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:42.499Z,1528878222.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:42.899Z,1528878222.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:43.288Z,1528878223.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:43.690Z,1528878223.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:44.093Z,1528878224.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:44.488Z,1528878224.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:44.890Z,1528878224.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:45.299Z,1528878225.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:45.700Z,1528878225.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:46.096Z,1528878226.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:46.491Z,1528878226.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:46.888Z,1528878226.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:47.292Z,1528878227.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:47.691Z,1528878227.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:48.096Z,1528878228.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:48.499Z,1528878228.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:48.903Z,1528878228.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:49.290Z,1528878229.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:49.696Z,1528878229.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:50.091Z,1528878230.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:50.490Z,1528878230.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:50.893Z,1528878230.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:51.299Z,1528878231.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:51.704Z,1528878231.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:52.096Z,1528878232.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:52.491Z,1528878232.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:52.890Z,1528878232.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:53.294Z,1528878233.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:53.695Z,1528878233.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:54.097Z,1528878234.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:54.499Z,1528878234.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:54.900Z,1528878234.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:55.290Z,1528878235.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:55.691Z,1528878235.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:56.092Z,1528878236.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:56.490Z,1528878236.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:56.890Z,1528878236.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:57.304Z,1528878237.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:57.697Z,1528878237.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:58.101Z,1528878238.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:58.492Z,1528878238.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:58.887Z,1528878238.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:59.294Z,1528878239.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:23:59.696Z,1528878239.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:00.104Z,1528878240.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:00.503Z,1528878240.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:00.901Z,1528878240.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:01.289Z,1528878241.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:01.692Z,1528878241.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:02.092Z,1528878242.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:02.495Z,1528878242.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:02.892Z,1528878242.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:03.302Z,1528878243.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:03.702Z,1528878243.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:04.100Z,1528878244.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:04.498Z,1528878244.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:04.892Z,1528878244.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:05.293Z,1528878245.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:05.704Z,1528878245.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:06.099Z,1528878246.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:06.504Z,1528878246.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:06.906Z,1528878246.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:07.298Z,1528878247.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:07.699Z,1528878247.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:08.100Z,1528878248.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:08.500Z,1528878248.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:08.902Z,1528878248.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:09.307Z,1528878249.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:09.702Z,1528878249.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:10.105Z,1528878250.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:10.505Z,1528878250.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:10.908Z,1528878250.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:11.301Z,1528878251.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:11.685Z,1528878251.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:12.111Z,1528878252.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:12.514Z,1528878252.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:12.899Z,1528878252.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:13.289Z,1528878253.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:13.692Z,1528878253.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:14.091Z,1528878254.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:14.487Z,1528878254.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:14.890Z,1528878254.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:15.299Z,1528878255.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:15.695Z,1528878255.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:16.096Z,1528878256.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:16.491Z,1528878256.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:16.890Z,1528878256.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:17.289Z,1528878257.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:17.690Z,1528878257.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:18.096Z,1528878258.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:18.498Z,1528878258.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:18.899Z,1528878258.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:19.287Z,1528878259.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:19.696Z,1528878259.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:20.091Z,1528878260.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:20.487Z,1528878260.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:20.896Z,1528878260.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:21.299Z,1528878261.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:21.695Z,1528878261.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:22.095Z,1528878262.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:22.496Z,1528878262.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:22.888Z,1528878262.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:23.289Z,1528878263.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:23.696Z,1528878263.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:24.096Z,1528878264.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:24.498Z,1528878264.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:24.899Z,1528878264.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:25.287Z,1528878265.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:25.690Z,1528878265.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:26.092Z,1528878266.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:29.202Z,1528878269.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:29.229Z,1528878269.229 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T08:19:28.9Z
2018-06-13T08:24:29.229Z,1528878269.229 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T08:24:29.230Z,1528878269.230 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T08:24:29.380Z,1528878269.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:30.532Z,1528878270.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:30.700Z,1528878270.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:31.080Z,1528878271.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:31.486Z,1528878271.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:31.876Z,1528878271.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:32.284Z,1528878272.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:32.680Z,1528878272.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:35.801Z,1528878275.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:35.914Z,1528878275.914 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0116.lzma
2018-06-13T08:24:36.004Z,1528878276.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:36.385Z,1528878276.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:36.706Z,1528878276.706 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0116.lzma.bak
2018-06-13T08:24:36.706Z,1528878276.706 [DataOverHttps](INFO): SBD MOMSN=8328891
2018-06-13T08:24:36.773Z,1528878276.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:38.642Z,1528878278.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:38.796Z,1528878278.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:39.193Z,1528878279.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:42.389Z,1528878282.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:42.577Z,1528878282.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:42.941Z,1528878282.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:43.347Z,1528878283.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:43.744Z,1528878283.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:44.156Z,1528878284.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:44.553Z,1528878284.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:44.950Z,1528878284.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:45.343Z,1528878285.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:48.455Z,1528878288.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:48.576Z,1528878288.576 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0117.lzma
2018-06-13T08:24:48.647Z,1528878288.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:49.040Z,1528878289.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:49.374Z,1528878289.374 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0117.lzma.bak
2018-06-13T08:24:49.374Z,1528878289.374 [DataOverHttps](INFO): SBD MOMSN=8328893
2018-06-13T08:24:49.448Z,1528878289.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:51.303Z,1528878291.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:51.306Z,1528878291.306 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T08:24:51.306Z,1528878291.306 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T08:24:51.306Z,1528878291.306 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T08:24:51.444Z,1528878291.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:51.840Z,1528878291.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:54.942Z,1528878294.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:55.096Z,1528878295.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:55.499Z,1528878295.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:55.893Z,1528878295.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:56.305Z,1528878296.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:56.704Z,1528878296.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:57.182Z,1528878297.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:57.548Z,1528878297.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:57.904Z,1528878297.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:58.283Z,1528878298.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:58.687Z,1528878298.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:59.088Z,1528878299.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:59.492Z,1528878299.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:24:59.878Z,1528878299.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:00.294Z,1528878300.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:00.678Z,1528878300.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:01.084Z,1528878301.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:01.492Z,1528878301.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:01.883Z,1528878301.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:02.282Z,1528878302.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:02.693Z,1528878302.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:03.087Z,1528878303.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:03.492Z,1528878303.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:03.888Z,1528878303.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:04.284Z,1528878304.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:04.678Z,1528878304.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:05.089Z,1528878305.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:05.492Z,1528878305.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:05.887Z,1528878305.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:06.284Z,1528878306.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:06.677Z,1528878306.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:07.080Z,1528878307.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:07.488Z,1528878307.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:07.887Z,1528878307.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:08.288Z,1528878308.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:08.680Z,1528878308.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:09.077Z,1528878309.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:09.479Z,1528878309.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:09.892Z,1528878309.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:10.289Z,1528878310.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:10.696Z,1528878310.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:11.094Z,1528878311.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:11.476Z,1528878311.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:11.878Z,1528878311.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:12.283Z,1528878312.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:12.676Z,1528878312.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:13.079Z,1528878313.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:13.493Z,1528878313.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:13.892Z,1528878313.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:14.296Z,1528878314.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:14.680Z,1528878314.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:15.078Z,1528878315.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:15.481Z,1528878315.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:15.880Z,1528878315.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:16.285Z,1528878316.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:16.692Z,1528878316.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:17.092Z,1528878317.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:17.476Z,1528878317.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:17.881Z,1528878317.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:18.284Z,1528878318.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:18.684Z,1528878318.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:19.080Z,1528878319.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:19.492Z,1528878319.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:19.889Z,1528878319.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:20.292Z,1528878320.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:20.681Z,1528878320.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:21.078Z,1528878321.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:21.484Z,1528878321.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:21.883Z,1528878321.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:22.285Z,1528878322.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:22.694Z,1528878322.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:23.100Z,1528878323.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:23.484Z,1528878323.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:23.886Z,1528878323.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:24.288Z,1528878324.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:24.687Z,1528878324.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:25.080Z,1528878325.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:25.498Z,1528878325.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:25.893Z,1528878325.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:26.290Z,1528878326.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:26.689Z,1528878326.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:27.092Z,1528878327.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:27.474Z,1528878327.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:27.888Z,1528878327.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:28.288Z,1528878328.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:28.688Z,1528878328.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:29.091Z,1528878329.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:29.476Z,1528878329.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:29.890Z,1528878329.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:30.277Z,1528878330.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:30.678Z,1528878330.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:31.082Z,1528878331.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:31.486Z,1528878331.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:31.888Z,1528878331.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:32.287Z,1528878332.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:32.680Z,1528878332.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:33.077Z,1528878333.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:33.480Z,1528878333.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:33.879Z,1528878333.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:34.286Z,1528878334.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:34.687Z,1528878334.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:35.084Z,1528878335.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:35.483Z,1528878335.483 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:35.483Z,1528878335.483 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100
2018-06-13T08:25:35.483Z,1528878335.483 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:25:35.485Z,1528878335.485 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:35.486Z,1528878335.486 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100
2018-06-13T08:25:35.486Z,1528878335.486 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:25:35.487Z,1528878335.487 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:35.487Z,1528878335.487 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 100
2018-06-13T08:25:35.487Z,1528878335.487 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:25:35.557Z,1528878335.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:25:35.557Z,1528878335.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:25:35.558Z,1528878335.558 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:25:35.965Z,1528878335.965 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:25:35.965Z,1528878335.965 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100
2018-06-13T08:25:35.966Z,1528878335.966 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:25:35.966Z,1528878335.966 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100
2018-06-13T08:25:35.966Z,1528878335.966 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:25:35.966Z,1528878335.966 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 100
2018-06-13T08:25:36.287Z,1528878336.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:25:36.287Z,1528878336.287 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:25:36.287Z,1528878336.287 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:25:36.288Z,1528878336.288 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:25:36.288Z,1528878336.288 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:25:36.289Z,1528878336.289 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:25:36.289Z,1528878336.289 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:25:36.289Z,1528878336.289 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:25:36.290Z,1528878336.290 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:25:36.676Z,1528878336.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:25:36.677Z,1528878336.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:37.079Z,1528878337.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:25:37.079Z,1528878337.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:37.489Z,1528878337.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:25:37.490Z,1528878337.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:37.889Z,1528878337.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:25:37.890Z,1528878337.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:38.293Z,1528878338.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:25:38.294Z,1528878338.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:38.686Z,1528878338.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:25:38.687Z,1528878338.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:39.084Z,1528878339.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:25:39.085Z,1528878339.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:39.484Z,1528878339.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:25:39.489Z,1528878339.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:39.882Z,1528878339.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:25:39.883Z,1528878339.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:40.296Z,1528878340.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:25:40.297Z,1528878340.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:40.692Z,1528878340.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:25:40.693Z,1528878340.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:41.089Z,1528878341.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:25:41.090Z,1528878341.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:41.485Z,1528878341.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:25:41.486Z,1528878341.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:41.884Z,1528878341.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:25:41.885Z,1528878341.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:42.282Z,1528878342.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:25:42.283Z,1528878342.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:42.684Z,1528878342.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:25:42.685Z,1528878342.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:43.080Z,1528878343.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:25:43.081Z,1528878343.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:43.489Z,1528878343.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:25:43.490Z,1528878343.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:43.888Z,1528878343.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:25:43.890Z,1528878343.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:44.288Z,1528878344.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:25:44.289Z,1528878344.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:44.682Z,1528878344.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:25:44.683Z,1528878344.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:45.085Z,1528878345.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:25:45.086Z,1528878345.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:45.480Z,1528878345.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:25:45.481Z,1528878345.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:45.887Z,1528878345.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:25:45.888Z,1528878345.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:46.285Z,1528878346.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:25:46.286Z,1528878346.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:46.692Z,1528878346.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:25:46.694Z,1528878346.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:47.092Z,1528878347.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:25:47.093Z,1528878347.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:47.479Z,1528878347.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:25:47.480Z,1528878347.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:47.880Z,1528878347.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:25:47.881Z,1528878347.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:48.282Z,1528878348.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:25:48.282Z,1528878348.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:48.685Z,1528878348.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:25:48.686Z,1528878348.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:49.079Z,1528878349.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:25:49.080Z,1528878349.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:49.493Z,1528878349.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:25:49.494Z,1528878349.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:49.900Z,1528878349.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:25:49.902Z,1528878349.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:50.288Z,1528878350.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:25:50.289Z,1528878350.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:50.683Z,1528878350.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:25:50.684Z,1528878350.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:51.080Z,1528878351.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:25:51.081Z,1528878351.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:51.484Z,1528878351.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:25:51.485Z,1528878351.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:51.886Z,1528878351.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T08:25:51.887Z,1528878351.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:55.004Z,1528878355.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T08:25:55.005Z,1528878355.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:55.188Z,1528878355.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T08:25:55.190Z,1528878355.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:55.584Z,1528878355.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:55.958Z,1528878355.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:56.356Z,1528878356.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:56.756Z,1528878356.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:57.179Z,1528878357.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:57.578Z,1528878357.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:57.963Z,1528878357.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:58.353Z,1528878358.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:58.764Z,1528878358.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:59.154Z,1528878359.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:59.563Z,1528878359.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:25:59.962Z,1528878359.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:00.362Z,1528878360.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:00.754Z,1528878360.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:01.154Z,1528878361.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:01.552Z,1528878361.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:01.953Z,1528878361.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:02.363Z,1528878362.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:02.768Z,1528878362.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:03.163Z,1528878363.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:03.560Z,1528878363.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:03.955Z,1528878363.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:04.354Z,1528878364.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:04.753Z,1528878364.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:05.154Z,1528878365.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:05.560Z,1528878365.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:05.963Z,1528878365.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:06.359Z,1528878366.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:06.756Z,1528878366.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:07.156Z,1528878367.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:07.564Z,1528878367.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:07.956Z,1528878367.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:08.365Z,1528878368.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:08.776Z,1528878368.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:09.165Z,1528878369.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:09.556Z,1528878369.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:09.958Z,1528878369.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:10.357Z,1528878370.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:10.757Z,1528878370.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:11.158Z,1528878371.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:11.565Z,1528878371.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:11.968Z,1528878371.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:12.376Z,1528878372.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:12.756Z,1528878372.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:13.165Z,1528878373.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:13.559Z,1528878373.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:13.956Z,1528878373.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:14.365Z,1528878374.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:14.766Z,1528878374.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:15.174Z,1528878375.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:15.557Z,1528878375.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:15.964Z,1528878375.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:16.357Z,1528878376.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:16.757Z,1528878376.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:17.160Z,1528878377.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:17.564Z,1528878377.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:17.970Z,1528878377.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:18.370Z,1528878378.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:18.758Z,1528878378.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:19.168Z,1528878379.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:19.563Z,1528878379.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:19.962Z,1528878379.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:20.369Z,1528878380.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:20.774Z,1528878380.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:21.168Z,1528878381.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:21.566Z,1528878381.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:21.970Z,1528878381.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:22.364Z,1528878382.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:22.772Z,1528878382.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:23.149Z,1528878383.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:23.575Z,1528878383.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:23.981Z,1528878383.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:24.383Z,1528878384.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:24.750Z,1528878384.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:25.151Z,1528878385.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:25.552Z,1528878385.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:25.954Z,1528878385.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:26.359Z,1528878386.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:26.763Z,1528878386.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:27.159Z,1528878387.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:27.554Z,1528878387.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:27.955Z,1528878387.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:28.350Z,1528878388.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:28.754Z,1528878388.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:29.155Z,1528878389.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:29.559Z,1528878389.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:29.962Z,1528878389.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:30.362Z,1528878390.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:30.752Z,1528878390.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:31.160Z,1528878391.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:31.557Z,1528878391.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:31.952Z,1528878391.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:32.359Z,1528878392.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:32.763Z,1528878392.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:33.160Z,1528878393.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:33.554Z,1528878393.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:33.955Z,1528878393.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:34.352Z,1528878394.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:34.753Z,1528878394.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:35.155Z,1528878395.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:35.564Z,1528878395.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:35.962Z,1528878395.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:36.363Z,1528878396.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:36.754Z,1528878396.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:37.160Z,1528878397.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:37.570Z,1528878397.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:37.952Z,1528878397.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:38.361Z,1528878398.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:38.763Z,1528878398.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:39.164Z,1528878399.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:39.555Z,1528878399.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:39.955Z,1528878399.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:40.353Z,1528878400.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:40.755Z,1528878400.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:41.165Z,1528878401.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:41.568Z,1528878401.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:41.968Z,1528878401.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:42.368Z,1528878402.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:42.766Z,1528878402.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:43.158Z,1528878403.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:43.562Z,1528878403.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:43.956Z,1528878403.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:44.365Z,1528878404.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:44.769Z,1528878404.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:45.162Z,1528878405.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:45.556Z,1528878405.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:45.968Z,1528878405.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:46.356Z,1528878406.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:46.755Z,1528878406.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:47.162Z,1528878407.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:47.562Z,1528878407.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:47.967Z,1528878407.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:48.375Z,1528878408.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:48.764Z,1528878408.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:49.148Z,1528878409.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:49.550Z,1528878409.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:49.950Z,1528878409.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:50.375Z,1528878410.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:50.777Z,1528878410.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:51.174Z,1528878411.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:51.552Z,1528878411.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:51.954Z,1528878411.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:52.352Z,1528878412.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:52.753Z,1528878412.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:53.153Z,1528878413.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:56.284Z,1528878416.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:56.463Z,1528878416.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:56.842Z,1528878416.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:57.229Z,1528878417.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:57.633Z,1528878417.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:58.018Z,1528878418.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:58.445Z,1528878418.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:58.846Z,1528878418.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:59.247Z,1528878419.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:26:59.624Z,1528878419.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:00.020Z,1528878420.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:00.420Z,1528878420.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:00.821Z,1528878420.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:01.224Z,1528878421.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:01.655Z,1528878421.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:02.051Z,1528878422.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:02.427Z,1528878422.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:02.823Z,1528878422.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:03.222Z,1528878423.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:03.633Z,1528878423.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:04.023Z,1528878424.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:04.436Z,1528878424.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:04.835Z,1528878424.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:05.232Z,1528878425.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:05.629Z,1528878425.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:06.024Z,1528878426.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:06.428Z,1528878426.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:06.828Z,1528878426.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:07.236Z,1528878427.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:07.652Z,1528878427.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:08.033Z,1528878428.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:08.436Z,1528878428.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:08.824Z,1528878428.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:09.228Z,1528878429.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:09.628Z,1528878429.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:10.037Z,1528878430.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:10.433Z,1528878430.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:10.844Z,1528878430.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:11.237Z,1528878431.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:11.620Z,1528878431.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:12.024Z,1528878432.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:12.427Z,1528878432.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:12.821Z,1528878432.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:13.227Z,1528878433.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:13.638Z,1528878433.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:14.033Z,1528878434.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:14.434Z,1528878434.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:14.832Z,1528878434.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:15.232Z,1528878435.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:15.625Z,1528878435.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:16.032Z,1528878436.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:16.441Z,1528878436.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:16.836Z,1528878436.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:17.246Z,1528878437.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:17.624Z,1528878437.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:18.024Z,1528878438.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:18.429Z,1528878438.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:18.830Z,1528878438.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:19.225Z,1528878439.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:19.638Z,1528878439.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:20.037Z,1528878440.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:20.433Z,1528878440.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:20.827Z,1528878440.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:21.225Z,1528878441.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:21.624Z,1528878441.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:22.025Z,1528878442.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:22.436Z,1528878442.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:22.836Z,1528878442.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:23.235Z,1528878443.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:23.620Z,1528878443.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:24.028Z,1528878444.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:24.427Z,1528878444.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:24.821Z,1528878444.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:25.223Z,1528878445.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:25.633Z,1528878445.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:26.032Z,1528878446.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:26.431Z,1528878446.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:26.823Z,1528878446.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:27.222Z,1528878447.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:27.624Z,1528878447.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:28.027Z,1528878448.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:28.428Z,1528878448.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:28.836Z,1528878448.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:29.232Z,1528878449.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:29.622Z,1528878449.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:30.023Z,1528878450.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:30.423Z,1528878450.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:30.822Z,1528878450.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:31.223Z,1528878451.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:31.633Z,1528878451.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:32.031Z,1528878452.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:32.431Z,1528878452.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:32.836Z,1528878452.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:33.225Z,1528878453.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:33.626Z,1528878453.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:34.040Z,1528878454.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:34.445Z,1528878454.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:34.845Z,1528878454.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:35.248Z,1528878455.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:35.616Z,1528878455.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:36.020Z,1528878456.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:36.420Z,1528878456.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:36.820Z,1528878456.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:37.224Z,1528878457.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:37.648Z,1528878457.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:38.026Z,1528878458.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:38.451Z,1528878458.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:38.828Z,1528878458.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:39.228Z,1528878459.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:39.625Z,1528878459.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:40.025Z,1528878460.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:40.428Z,1528878460.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:40.852Z,1528878460.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:41.228Z,1528878461.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:41.624Z,1528878461.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:42.022Z,1528878462.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:42.423Z,1528878462.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:42.820Z,1528878462.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:43.228Z,1528878463.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:43.631Z,1528878463.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:44.027Z,1528878464.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:44.428Z,1528878464.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:44.822Z,1528878464.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:45.220Z,1528878465.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:45.622Z,1528878465.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:46.019Z,1528878466.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:46.428Z,1528878466.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:46.836Z,1528878466.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:47.229Z,1528878467.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:47.620Z,1528878467.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:48.023Z,1528878468.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:48.423Z,1528878468.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:48.819Z,1528878468.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:49.222Z,1528878469.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:49.631Z,1528878469.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:50.035Z,1528878470.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:50.432Z,1528878470.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:50.824Z,1528878470.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:51.220Z,1528878471.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:51.626Z,1528878471.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:52.024Z,1528878472.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:55.156Z,1528878475.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:55.327Z,1528878475.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:55.729Z,1528878475.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:56.094Z,1528878476.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:56.493Z,1528878476.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:56.894Z,1528878476.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:57.291Z,1528878477.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:57.699Z,1528878477.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:58.102Z,1528878478.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:58.500Z,1528878478.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:58.896Z,1528878478.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:59.294Z,1528878479.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:27:59.694Z,1528878479.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:00.095Z,1528878480.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:00.499Z,1528878480.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:00.903Z,1528878480.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:01.299Z,1528878481.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:01.696Z,1528878481.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:02.100Z,1528878482.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:02.493Z,1528878482.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:02.895Z,1528878482.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:03.293Z,1528878483.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:03.699Z,1528878483.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:04.103Z,1528878484.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:04.503Z,1528878484.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:04.900Z,1528878484.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:05.293Z,1528878485.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:05.694Z,1528878485.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:06.094Z,1528878486.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:06.503Z,1528878486.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:06.924Z,1528878486.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:07.299Z,1528878487.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:07.694Z,1528878487.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:08.096Z,1528878488.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:08.496Z,1528878488.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:08.898Z,1528878488.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:09.296Z,1528878489.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:09.699Z,1528878489.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:10.098Z,1528878490.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:10.499Z,1528878490.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:10.896Z,1528878490.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:11.300Z,1528878491.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:11.695Z,1528878491.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:12.093Z,1528878492.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:12.503Z,1528878492.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:12.903Z,1528878492.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:13.299Z,1528878493.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:13.695Z,1528878493.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:14.093Z,1528878494.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:14.494Z,1528878494.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:14.895Z,1528878494.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:15.300Z,1528878495.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:15.700Z,1528878495.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:16.103Z,1528878496.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:16.507Z,1528878496.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:16.895Z,1528878496.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:17.295Z,1528878497.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:17.695Z,1528878497.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:18.095Z,1528878498.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:18.503Z,1528878498.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:18.903Z,1528878498.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:19.298Z,1528878499.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:19.698Z,1528878499.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:20.100Z,1528878500.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:20.495Z,1528878500.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:20.897Z,1528878500.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:21.300Z,1528878501.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:21.704Z,1528878501.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:22.102Z,1528878502.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:22.504Z,1528878502.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:22.898Z,1528878502.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:23.304Z,1528878503.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:23.700Z,1528878503.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:24.095Z,1528878504.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:24.502Z,1528878504.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:24.904Z,1528878504.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:25.300Z,1528878505.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:25.696Z,1528878505.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:26.100Z,1528878506.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:26.496Z,1528878506.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:26.900Z,1528878506.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:27.303Z,1528878507.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:27.704Z,1528878507.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:28.108Z,1528878508.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:28.509Z,1528878508.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:28.896Z,1528878508.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:29.296Z,1528878509.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:29.696Z,1528878509.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:30.096Z,1528878510.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:30.506Z,1528878510.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:30.912Z,1528878510.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:31.304Z,1528878511.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:31.696Z,1528878511.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:32.095Z,1528878512.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:32.504Z,1528878512.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:32.901Z,1528878512.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:33.292Z,1528878513.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:33.708Z,1528878513.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:34.109Z,1528878514.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:34.504Z,1528878514.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:34.897Z,1528878514.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:35.296Z,1528878515.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:35.695Z,1528878515.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:36.096Z,1528878516.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:36.508Z,1528878516.508 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:36.508Z,1528878516.508 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 101
2018-06-13T08:28:36.508Z,1528878516.508 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:28:36.510Z,1528878516.510 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:36.510Z,1528878516.510 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 101
2018-06-13T08:28:36.511Z,1528878516.511 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:28:36.512Z,1528878516.512 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:36.512Z,1528878516.512 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 101
2018-06-13T08:28:36.512Z,1528878516.512 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:28:36.602Z,1528878516.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:28:36.602Z,1528878516.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:28:36.603Z,1528878516.603 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:28:36.989Z,1528878516.989 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:28:36.989Z,1528878516.989 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 101
2018-06-13T08:28:36.989Z,1528878516.989 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:28:36.989Z,1528878516.990 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 101
2018-06-13T08:28:36.990Z,1528878516.990 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:28:36.990Z,1528878516.990 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 101
2018-06-13T08:28:37.301Z,1528878517.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:28:37.302Z,1528878517.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:28:37.302Z,1528878517.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:28:37.303Z,1528878517.303 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:28:37.303Z,1528878517.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:28:37.303Z,1528878517.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:28:37.304Z,1528878517.304 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:28:37.304Z,1528878517.304 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:28:37.304Z,1528878517.304 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:28:37.688Z,1528878517.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:28:37.689Z,1528878517.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:38.088Z,1528878518.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:28:38.089Z,1528878518.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:38.492Z,1528878518.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:28:38.492Z,1528878518.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:38.892Z,1528878518.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:28:38.894Z,1528878518.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:39.291Z,1528878519.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:28:39.292Z,1528878519.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:39.718Z,1528878519.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:28:39.719Z,1528878519.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:40.102Z,1528878520.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:28:40.103Z,1528878520.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:40.495Z,1528878520.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:28:40.496Z,1528878520.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:40.891Z,1528878520.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:28:40.892Z,1528878520.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:41.296Z,1528878521.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:28:41.297Z,1528878521.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:41.690Z,1528878521.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:28:41.691Z,1528878521.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:42.091Z,1528878522.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:28:42.092Z,1528878522.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:42.503Z,1528878522.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:28:42.504Z,1528878522.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:42.902Z,1528878522.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:28:42.903Z,1528878522.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:43.299Z,1528878523.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:28:43.299Z,1528878523.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:43.695Z,1528878523.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:28:43.696Z,1528878523.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:44.091Z,1528878524.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:28:44.092Z,1528878524.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:44.495Z,1528878524.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:28:44.496Z,1528878524.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:44.909Z,1528878524.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:28:44.910Z,1528878524.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:45.291Z,1528878525.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:28:45.292Z,1528878525.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:45.704Z,1528878525.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:28:45.705Z,1528878525.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:46.103Z,1528878526.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:28:46.104Z,1528878526.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:46.504Z,1528878526.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:28:46.505Z,1528878526.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:46.893Z,1528878526.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:28:46.894Z,1528878526.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:47.295Z,1528878527.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:28:47.296Z,1528878527.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:47.692Z,1528878527.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:28:47.693Z,1528878527.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:48.100Z,1528878528.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:28:48.101Z,1528878528.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:48.508Z,1528878528.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:28:48.508Z,1528878528.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:48.904Z,1528878528.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:28:48.905Z,1528878528.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:49.302Z,1528878529.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:28:49.303Z,1528878529.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:49.706Z,1528878529.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:28:49.707Z,1528878529.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:50.091Z,1528878530.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:28:50.092Z,1528878530.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:50.493Z,1528878530.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:28:50.494Z,1528878530.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:50.900Z,1528878530.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:28:50.901Z,1528878530.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:51.293Z,1528878531.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:28:51.294Z,1528878531.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:51.703Z,1528878531.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:28:51.704Z,1528878531.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:52.107Z,1528878532.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:28:52.107Z,1528878532.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:55.232Z,1528878535.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T08:28:55.233Z,1528878535.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:55.384Z,1528878535.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T08:28:55.385Z,1528878535.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:55.783Z,1528878535.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T08:28:55.784Z,1528878535.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:56.181Z,1528878536.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T08:28:56.182Z,1528878536.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:56.588Z,1528878536.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:56.990Z,1528878536.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:57.387Z,1528878537.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:57.776Z,1528878537.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:58.181Z,1528878538.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:58.560Z,1528878538.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:58.968Z,1528878538.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:59.370Z,1528878539.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:28:59.775Z,1528878539.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:00.190Z,1528878540.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:00.579Z,1528878540.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:00.970Z,1528878540.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:01.370Z,1528878541.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:01.779Z,1528878541.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:02.170Z,1528878542.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:02.575Z,1528878542.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:02.979Z,1528878542.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:03.376Z,1528878543.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:03.770Z,1528878543.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:04.173Z,1528878544.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:04.568Z,1528878544.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:04.978Z,1528878544.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:05.375Z,1528878545.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:05.779Z,1528878545.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:06.184Z,1528878546.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:06.580Z,1528878546.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:06.970Z,1528878546.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:07.371Z,1528878547.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:07.778Z,1528878547.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:08.180Z,1528878548.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:08.580Z,1528878548.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:08.985Z,1528878548.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:09.385Z,1528878549.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:09.780Z,1528878549.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:10.178Z,1528878550.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:10.578Z,1528878550.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:10.978Z,1528878550.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:11.390Z,1528878551.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:11.787Z,1528878551.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:12.186Z,1528878552.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:12.586Z,1528878552.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:12.976Z,1528878552.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:13.380Z,1528878553.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:13.786Z,1528878553.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:14.164Z,1528878554.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:14.594Z,1528878554.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:15.003Z,1528878555.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:15.391Z,1528878555.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:15.770Z,1528878555.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:16.168Z,1528878556.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:16.564Z,1528878556.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:16.968Z,1528878556.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:17.369Z,1528878557.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:17.773Z,1528878557.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:18.195Z,1528878558.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:18.605Z,1528878558.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:18.970Z,1528878558.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:19.369Z,1528878559.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:19.780Z,1528878559.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:20.167Z,1528878560.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:20.575Z,1528878560.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:20.979Z,1528878560.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:21.376Z,1528878561.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:21.776Z,1528878561.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:22.171Z,1528878562.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:22.569Z,1528878562.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:22.971Z,1528878562.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:23.383Z,1528878563.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:23.775Z,1528878563.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:24.179Z,1528878564.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:24.580Z,1528878564.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:24.966Z,1528878564.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:25.371Z,1528878565.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:25.774Z,1528878565.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:26.176Z,1528878566.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:26.580Z,1528878566.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:26.980Z,1528878566.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:27.378Z,1528878567.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:27.771Z,1528878567.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:28.176Z,1528878568.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:28.568Z,1528878568.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:28.971Z,1528878568.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:29.376Z,1528878569.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:29.780Z,1528878569.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:30.184Z,1528878570.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:30.580Z,1528878570.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:30.976Z,1528878570.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:31.370Z,1528878571.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:31.778Z,1528878571.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:32.168Z,1528878572.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:32.579Z,1528878572.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:32.980Z,1528878572.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:33.377Z,1528878573.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:33.771Z,1528878573.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:34.172Z,1528878574.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:34.568Z,1528878574.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:34.970Z,1528878574.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:35.375Z,1528878575.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:35.776Z,1528878575.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:36.184Z,1528878576.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:36.580Z,1528878576.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:36.968Z,1528878576.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:37.377Z,1528878577.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:37.773Z,1528878577.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:38.171Z,1528878578.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:38.584Z,1528878578.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:38.985Z,1528878578.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:39.376Z,1528878579.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:39.772Z,1528878579.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:40.176Z,1528878580.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:40.568Z,1528878580.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:40.972Z,1528878580.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:41.385Z,1528878581.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:41.781Z,1528878581.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:42.184Z,1528878582.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:42.585Z,1528878582.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:42.968Z,1528878582.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:43.372Z,1528878583.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:43.775Z,1528878583.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:44.172Z,1528878584.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:44.580Z,1528878584.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:44.984Z,1528878584.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:45.377Z,1528878585.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:45.783Z,1528878585.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:46.176Z,1528878586.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:46.578Z,1528878586.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:46.986Z,1528878586.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:47.396Z,1528878587.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:47.769Z,1528878587.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:48.174Z,1528878588.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:48.585Z,1528878588.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:48.979Z,1528878588.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:49.374Z,1528878589.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:49.786Z,1528878589.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:50.183Z,1528878590.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:50.587Z,1528878590.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:50.981Z,1528878590.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:51.374Z,1528878591.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:51.777Z,1528878591.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:51.780Z,1528878591.780 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T08:29:51.780Z,1528878591.780 [Default:CheckIn:C.Wait] Stopped
2018-06-13T08:29:51.780Z,1528878591.780 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T08:29:51.781Z,1528878591.781 [Default:CheckIn:D] Running Loop=1
2018-06-13T08:29:52.184Z,1528878592.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:52.187Z,1528878592.187 [Default:CheckIn:D] Stopped
2018-06-13T08:29:52.187Z,1528878592.187 [Default:CheckIn:E] Running Loop=1
2018-06-13T08:29:55.299Z,1528878595.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:55.303Z,1528878595.303 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 302.645703 min 
2018-06-13T08:29:55.303Z,1528878595.303 [Default:CheckIn:E] Stopped
2018-06-13T08:29:55.303Z,1528878595.303 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T08:29:55.303Z,1528878595.303 [Default:CheckIn] Stopped
2018-06-13T08:29:55.303Z,1528878595.303 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T08:29:55.303Z,1528878595.303 [Default:CheckIn](INFO): Running loop #30
2018-06-13T08:29:55.303Z,1528878595.303 [Default:CheckIn] Running Loop=30
2018-06-13T08:29:55.304Z,1528878595.304 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T08:29:55.304Z,1528878595.304 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T08:29:55.461Z,1528878595.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:55.852Z,1528878595.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:56.238Z,1528878596.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:56.626Z,1528878596.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:57.026Z,1528878597.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:57.424Z,1528878597.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:57.855Z,1528878597.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:58.256Z,1528878598.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:58.652Z,1528878598.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:59.028Z,1528878599.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:59.428Z,1528878599.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:29:59.832Z,1528878599.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:00.229Z,1528878600.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:00.662Z,1528878600.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:01.035Z,1528878601.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:01.454Z,1528878601.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:01.828Z,1528878601.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:02.230Z,1528878602.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:02.627Z,1528878602.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:03.028Z,1528878603.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:03.429Z,1528878603.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:03.855Z,1528878603.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:04.235Z,1528878604.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:04.639Z,1528878604.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:05.031Z,1528878605.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:05.431Z,1528878605.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:05.828Z,1528878605.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:06.231Z,1528878606.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:06.638Z,1528878606.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:07.035Z,1528878607.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:07.435Z,1528878607.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:07.828Z,1528878607.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:08.236Z,1528878608.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:08.631Z,1528878608.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:09.036Z,1528878609.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:09.427Z,1528878609.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:09.835Z,1528878609.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:10.262Z,1528878610.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:10.635Z,1528878610.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:11.031Z,1528878611.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:11.431Z,1528878611.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:11.836Z,1528878611.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:12.232Z,1528878612.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:12.638Z,1528878612.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:13.061Z,1528878613.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:13.435Z,1528878613.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:13.831Z,1528878613.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:14.230Z,1528878614.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:14.631Z,1528878614.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:15.029Z,1528878615.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:15.430Z,1528878615.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:15.835Z,1528878615.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:16.262Z,1528878616.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:16.635Z,1528878616.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:17.032Z,1528878617.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:17.430Z,1528878617.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:17.831Z,1528878617.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:18.236Z,1528878618.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:18.662Z,1528878618.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:19.040Z,1528878619.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:19.435Z,1528878619.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:19.833Z,1528878619.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:20.233Z,1528878620.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:20.631Z,1528878620.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:21.032Z,1528878621.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:21.430Z,1528878621.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:21.836Z,1528878621.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:22.261Z,1528878622.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:22.635Z,1528878622.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:23.031Z,1528878623.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:23.431Z,1528878623.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:23.837Z,1528878623.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:24.231Z,1528878624.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:24.639Z,1528878624.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:25.039Z,1528878625.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:25.435Z,1528878625.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:25.836Z,1528878625.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:26.230Z,1528878626.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:26.632Z,1528878626.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:27.034Z,1528878627.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:27.436Z,1528878627.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:27.840Z,1528878627.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:28.244Z,1528878628.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:28.652Z,1528878628.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:29.036Z,1528878629.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:29.436Z,1528878629.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:29.831Z,1528878629.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:30.233Z,1528878630.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:30.647Z,1528878630.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:31.052Z,1528878631.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:31.444Z,1528878631.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:31.833Z,1528878631.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:32.245Z,1528878632.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:32.652Z,1528878632.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:33.050Z,1528878633.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:33.441Z,1528878633.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:33.842Z,1528878633.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:34.247Z,1528878634.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:34.646Z,1528878634.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:35.052Z,1528878635.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:35.456Z,1528878635.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:35.843Z,1528878635.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:36.226Z,1528878636.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:36.646Z,1528878636.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:37.050Z,1528878637.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:37.451Z,1528878637.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:37.845Z,1528878637.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:38.226Z,1528878638.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:38.659Z,1528878638.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:39.063Z,1528878639.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:39.435Z,1528878639.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:39.831Z,1528878639.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:40.234Z,1528878640.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:40.633Z,1528878640.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:41.039Z,1528878641.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:41.440Z,1528878641.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:41.832Z,1528878641.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:42.232Z,1528878642.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:42.640Z,1528878642.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:43.039Z,1528878643.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:43.440Z,1528878643.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:43.833Z,1528878643.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:44.238Z,1528878644.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:44.641Z,1528878644.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:45.047Z,1528878645.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:45.441Z,1528878645.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:45.837Z,1528878645.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:46.236Z,1528878646.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:46.641Z,1528878646.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:47.046Z,1528878647.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:47.446Z,1528878647.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:47.840Z,1528878647.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:48.233Z,1528878648.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:48.647Z,1528878648.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:49.045Z,1528878649.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:49.441Z,1528878649.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:49.847Z,1528878649.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:50.241Z,1528878650.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:50.648Z,1528878650.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:51.047Z,1528878651.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:51.439Z,1528878651.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:51.847Z,1528878651.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:52.244Z,1528878652.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:52.646Z,1528878652.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:53.048Z,1528878653.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:53.447Z,1528878653.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:56.545Z,1528878656.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:56.704Z,1528878656.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:57.098Z,1528878657.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:57.493Z,1528878657.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:57.892Z,1528878657.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:58.293Z,1528878658.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:58.689Z,1528878658.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:59.073Z,1528878659.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:59.491Z,1528878659.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:30:59.907Z,1528878659.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:00.287Z,1528878660.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:00.708Z,1528878660.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:01.080Z,1528878661.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:01.478Z,1528878661.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:01.890Z,1528878661.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:02.276Z,1528878662.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:02.692Z,1528878662.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:03.087Z,1528878663.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:03.488Z,1528878663.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:03.880Z,1528878663.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:04.291Z,1528878664.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:04.683Z,1528878664.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:05.087Z,1528878665.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:05.487Z,1528878665.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:05.879Z,1528878665.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:06.280Z,1528878666.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:06.687Z,1528878666.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:07.088Z,1528878667.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:07.488Z,1528878667.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:07.880Z,1528878667.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:08.276Z,1528878668.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:08.688Z,1528878668.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:09.087Z,1528878669.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:09.485Z,1528878669.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:09.879Z,1528878669.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:10.281Z,1528878670.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:10.688Z,1528878670.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:11.087Z,1528878671.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:11.487Z,1528878671.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:11.876Z,1528878671.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:12.280Z,1528878672.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:12.687Z,1528878672.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:13.087Z,1528878673.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:13.488Z,1528878673.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:13.881Z,1528878673.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:14.278Z,1528878674.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:14.688Z,1528878674.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:15.091Z,1528878675.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:15.486Z,1528878675.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:15.881Z,1528878675.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:16.291Z,1528878676.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:16.685Z,1528878676.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:17.092Z,1528878677.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:17.487Z,1528878677.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:17.882Z,1528878677.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:18.280Z,1528878678.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:18.688Z,1528878678.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:19.092Z,1528878679.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:19.484Z,1528878679.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:19.891Z,1528878679.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:20.284Z,1528878680.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:20.690Z,1528878680.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:21.093Z,1528878681.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:21.490Z,1528878681.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:21.882Z,1528878681.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:22.290Z,1528878682.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:22.689Z,1528878682.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:23.093Z,1528878683.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:23.507Z,1528878683.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:23.887Z,1528878683.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:24.286Z,1528878684.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:24.695Z,1528878684.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:25.093Z,1528878685.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:25.496Z,1528878685.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:25.894Z,1528878685.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:26.280Z,1528878686.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:26.694Z,1528878686.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:27.095Z,1528878687.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:27.487Z,1528878687.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:27.890Z,1528878687.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:28.285Z,1528878688.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:28.692Z,1528878688.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:29.094Z,1528878689.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:29.504Z,1528878689.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:29.889Z,1528878689.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:30.276Z,1528878690.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:30.643Z,1528878690.643 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T08:31:30.643Z,1528878690.643 [NAL9602] Data Fault, FailCount= 3
2018-06-13T08:31:30.643Z,1528878690.643 [NAL9602](ERROR): Data Fault
2018-06-13T08:31:30.678Z,1528878690.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:30.789Z,1528878690.789 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T08:31:31.041Z,1528878691.041 [NAL9602](INFO): Powering down
2018-06-13T08:31:31.083Z,1528878691.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:31.480Z,1528878691.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:31.875Z,1528878691.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:31.949Z,1528878691.949 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T08:31:31.949Z,1528878691.949 [NAL9602] No Fault, FailCount= 3
2018-06-13T08:31:32.274Z,1528878692.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:32.675Z,1528878692.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:33.075Z,1528878693.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:33.475Z,1528878693.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:33.875Z,1528878693.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:34.275Z,1528878694.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:34.673Z,1528878694.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:35.075Z,1528878695.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:35.476Z,1528878695.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:35.873Z,1528878695.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:36.280Z,1528878696.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:36.675Z,1528878696.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:37.075Z,1528878697.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:37.474Z,1528878697.474 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:37.475Z,1528878697.475 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 102
2018-06-13T08:31:37.475Z,1528878697.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:31:37.476Z,1528878697.476 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:37.476Z,1528878697.476 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 102
2018-06-13T08:31:37.477Z,1528878697.477 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:31:37.478Z,1528878697.478 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:37.479Z,1528878697.479 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 102
2018-06-13T08:31:37.479Z,1528878697.479 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:31:37.557Z,1528878697.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:31:37.557Z,1528878697.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:31:37.558Z,1528878697.558 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:31:37.985Z,1528878697.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:31:37.985Z,1528878697.985 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 102
2018-06-13T08:31:37.985Z,1528878697.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:31:37.986Z,1528878697.986 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 102
2018-06-13T08:31:37.986Z,1528878697.986 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:31:37.986Z,1528878697.986 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 102
2018-06-13T08:31:38.277Z,1528878698.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:31:38.277Z,1528878698.277 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:31:38.277Z,1528878698.277 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:31:38.278Z,1528878698.278 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:31:38.278Z,1528878698.278 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:31:38.279Z,1528878698.279 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:31:38.279Z,1528878698.279 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:31:38.279Z,1528878698.279 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:31:38.280Z,1528878698.280 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:31:38.676Z,1528878698.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:31:38.677Z,1528878698.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:39.083Z,1528878699.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:31:39.084Z,1528878699.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:39.478Z,1528878699.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:31:39.479Z,1528878699.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:39.879Z,1528878699.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:31:39.880Z,1528878699.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:40.284Z,1528878700.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:31:40.285Z,1528878700.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:40.674Z,1528878700.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:31:40.675Z,1528878700.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:41.088Z,1528878701.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:31:41.093Z,1528878701.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:41.482Z,1528878701.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:31:41.482Z,1528878701.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:41.875Z,1528878701.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:31:41.876Z,1528878701.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:42.303Z,1528878702.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:31:42.304Z,1528878702.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:42.691Z,1528878702.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:31:42.692Z,1528878702.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:43.080Z,1528878703.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:31:43.080Z,1528878703.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:43.475Z,1528878703.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:31:43.476Z,1528878703.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:43.888Z,1528878703.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:31:43.889Z,1528878703.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:44.279Z,1528878704.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:31:44.280Z,1528878704.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:44.684Z,1528878704.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:31:44.685Z,1528878704.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:45.091Z,1528878705.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:31:45.092Z,1528878705.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:45.484Z,1528878705.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:31:45.485Z,1528878705.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:45.879Z,1528878705.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:31:45.880Z,1528878705.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:46.288Z,1528878706.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:31:46.289Z,1528878706.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:46.679Z,1528878706.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:31:46.680Z,1528878706.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:47.080Z,1528878707.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:31:47.081Z,1528878707.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:47.482Z,1528878707.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:31:47.482Z,1528878707.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:47.883Z,1528878707.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:31:47.884Z,1528878707.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:48.279Z,1528878708.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:31:48.280Z,1528878708.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:48.681Z,1528878708.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:31:48.682Z,1528878708.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:49.079Z,1528878709.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:31:49.080Z,1528878709.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:49.479Z,1528878709.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:31:49.480Z,1528878709.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:49.888Z,1528878709.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:31:49.889Z,1528878709.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:50.279Z,1528878710.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:31:50.280Z,1528878710.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:50.684Z,1528878710.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:31:50.685Z,1528878710.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:51.087Z,1528878711.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:31:51.088Z,1528878711.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:51.479Z,1528878711.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:31:51.480Z,1528878711.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:51.888Z,1528878711.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:31:51.889Z,1528878711.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:52.292Z,1528878712.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:31:52.297Z,1528878712.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:52.689Z,1528878712.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:31:52.690Z,1528878712.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:53.089Z,1528878713.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:31:53.090Z,1528878713.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:53.491Z,1528878713.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:31:53.492Z,1528878713.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:56.589Z,1528878716.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T08:31:56.591Z,1528878716.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:56.733Z,1528878716.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T08:31:56.734Z,1528878716.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:57.143Z,1528878717.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T08:31:57.144Z,1528878717.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:57.528Z,1528878717.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:57.940Z,1528878717.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:58.319Z,1528878718.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:58.723Z,1528878718.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:59.132Z,1528878719.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:59.527Z,1528878719.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:31:59.922Z,1528878719.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:00.327Z,1528878720.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:00.727Z,1528878720.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:01.082Z,1528878721.082 [NAL9602](INFO): Powering up NAL9602
2018-06-13T08:32:01.130Z,1528878721.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:01.527Z,1528878721.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:01.922Z,1528878721.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:02.328Z,1528878722.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:02.732Z,1528878722.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:03.125Z,1528878723.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:03.523Z,1528878723.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:03.928Z,1528878723.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:04.328Z,1528878724.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:04.722Z,1528878724.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:05.127Z,1528878725.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:05.523Z,1528878725.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:05.923Z,1528878725.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:06.328Z,1528878726.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:06.726Z,1528878726.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:07.122Z,1528878727.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:07.542Z,1528878727.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:07.922Z,1528878727.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:08.328Z,1528878728.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:08.726Z,1528878728.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:09.122Z,1528878729.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:09.522Z,1528878729.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:09.936Z,1528878729.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:10.324Z,1528878730.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:10.722Z,1528878730.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:11.127Z,1528878731.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:11.536Z,1528878731.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:11.886Z,1528878731.886 [NAL9602](INFO): NAL9602 initialized
2018-06-13T08:32:11.930Z,1528878731.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:12.330Z,1528878732.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:12.735Z,1528878732.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:13.135Z,1528878733.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:13.540Z,1528878733.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:13.927Z,1528878733.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:14.327Z,1528878734.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:14.728Z,1528878734.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:15.133Z,1528878735.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:15.535Z,1528878735.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:15.940Z,1528878735.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:16.326Z,1528878736.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:16.726Z,1528878736.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:17.129Z,1528878737.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:17.526Z,1528878737.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:17.935Z,1528878737.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:18.340Z,1528878738.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:18.735Z,1528878738.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:19.127Z,1528878739.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:19.527Z,1528878739.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:19.932Z,1528878739.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:20.324Z,1528878740.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:20.729Z,1528878740.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:21.134Z,1528878741.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:21.539Z,1528878741.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:21.940Z,1528878741.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:22.336Z,1528878742.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:22.726Z,1528878742.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:23.128Z,1528878743.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:23.526Z,1528878743.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:23.944Z,1528878743.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:24.340Z,1528878744.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:24.733Z,1528878744.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:25.126Z,1528878745.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:25.536Z,1528878745.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:25.937Z,1528878745.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:26.328Z,1528878746.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:26.731Z,1528878746.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:27.133Z,1528878747.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:27.540Z,1528878747.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:27.942Z,1528878747.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:28.326Z,1528878748.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:28.729Z,1528878748.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:29.132Z,1528878749.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:29.526Z,1528878749.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:29.937Z,1528878749.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:30.341Z,1528878750.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:30.738Z,1528878750.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:31.128Z,1528878751.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:31.541Z,1528878751.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:31.932Z,1528878751.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:32.333Z,1528878752.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:32.737Z,1528878752.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:33.133Z,1528878753.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:33.535Z,1528878753.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:33.945Z,1528878753.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:34.330Z,1528878754.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:34.729Z,1528878754.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:35.129Z,1528878755.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:35.535Z,1528878755.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:35.941Z,1528878755.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:36.342Z,1528878756.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:36.734Z,1528878756.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:37.136Z,1528878757.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:37.537Z,1528878757.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:37.937Z,1528878757.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:38.334Z,1528878758.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:38.733Z,1528878758.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:39.146Z,1528878759.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:39.541Z,1528878759.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:39.942Z,1528878759.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:40.349Z,1528878760.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:40.737Z,1528878760.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:41.140Z,1528878761.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:41.544Z,1528878761.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:41.944Z,1528878761.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:42.355Z,1528878762.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:42.747Z,1528878762.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:43.120Z,1528878763.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:43.523Z,1528878763.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:43.954Z,1528878763.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:44.325Z,1528878764.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:44.728Z,1528878764.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:45.150Z,1528878765.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:45.546Z,1528878765.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:45.946Z,1528878765.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:46.324Z,1528878766.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:46.726Z,1528878766.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:47.130Z,1528878767.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:47.528Z,1528878767.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:47.927Z,1528878767.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:48.352Z,1528878768.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:48.732Z,1528878768.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:49.127Z,1528878769.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:49.528Z,1528878769.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:49.952Z,1528878769.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:50.327Z,1528878770.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:50.732Z,1528878770.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:51.139Z,1528878771.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:51.534Z,1528878771.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:51.939Z,1528878771.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:52.332Z,1528878772.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:55.466Z,1528878775.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:55.616Z,1528878775.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:56.018Z,1528878776.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:56.419Z,1528878776.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:56.817Z,1528878776.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:57.212Z,1528878777.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:57.592Z,1528878777.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:58.021Z,1528878778.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:58.420Z,1528878778.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:58.823Z,1528878778.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:59.215Z,1528878779.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:32:59.616Z,1528878779.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:00.004Z,1528878780.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:00.404Z,1528878780.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:00.805Z,1528878780.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:01.212Z,1528878781.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:01.615Z,1528878781.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:02.016Z,1528878782.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:02.403Z,1528878782.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:02.805Z,1528878782.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:03.204Z,1528878783.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:03.599Z,1528878783.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:04.012Z,1528878784.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:04.415Z,1528878784.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:04.812Z,1528878784.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:05.206Z,1528878785.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:05.606Z,1528878785.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:06.003Z,1528878786.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:06.403Z,1528878786.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:06.807Z,1528878786.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:07.212Z,1528878787.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:07.615Z,1528878787.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:08.016Z,1528878788.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:08.403Z,1528878788.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:08.806Z,1528878788.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:09.206Z,1528878789.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:09.604Z,1528878789.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:10.016Z,1528878790.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:10.416Z,1528878790.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:10.812Z,1528878790.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:11.206Z,1528878791.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:11.607Z,1528878791.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:12.003Z,1528878792.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:12.408Z,1528878792.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:12.807Z,1528878792.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:13.216Z,1528878793.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:13.615Z,1528878793.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:14.016Z,1528878794.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:14.404Z,1528878794.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:14.806Z,1528878794.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:15.208Z,1528878795.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:15.604Z,1528878795.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:16.016Z,1528878796.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:16.416Z,1528878796.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:16.812Z,1528878796.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:17.207Z,1528878797.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:17.607Z,1528878797.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:18.003Z,1528878798.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:18.407Z,1528878798.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:18.806Z,1528878798.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:19.213Z,1528878799.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:19.615Z,1528878799.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:20.011Z,1528878800.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:20.403Z,1528878800.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:20.804Z,1528878800.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:21.208Z,1528878801.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:21.604Z,1528878801.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:22.016Z,1528878802.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:22.415Z,1528878802.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:22.813Z,1528878802.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:23.213Z,1528878803.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:23.604Z,1528878803.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:24.007Z,1528878804.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:24.412Z,1528878804.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:24.816Z,1528878804.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:25.225Z,1528878805.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:25.624Z,1528878805.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:26.015Z,1528878806.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:26.414Z,1528878806.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:26.810Z,1528878806.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:27.212Z,1528878807.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:27.612Z,1528878807.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:28.014Z,1528878808.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:28.417Z,1528878808.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:28.822Z,1528878808.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:29.214Z,1528878809.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:29.615Z,1528878809.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:30.011Z,1528878810.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:30.414Z,1528878810.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:30.820Z,1528878810.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:31.258Z,1528878811.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:31.617Z,1528878811.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:32.022Z,1528878812.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:32.415Z,1528878812.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:32.817Z,1528878812.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:33.214Z,1528878813.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:33.619Z,1528878813.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:34.028Z,1528878814.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:34.428Z,1528878814.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:34.826Z,1528878814.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:35.199Z,1528878815.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:35.601Z,1528878815.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:35.999Z,1528878815.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:36.402Z,1528878816.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:36.804Z,1528878816.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:37.211Z,1528878817.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:37.632Z,1528878817.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:38.010Z,1528878818.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:38.407Z,1528878818.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:38.803Z,1528878818.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:39.202Z,1528878819.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:39.602Z,1528878819.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:40.011Z,1528878820.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:40.435Z,1528878820.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:40.815Z,1528878820.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:41.208Z,1528878821.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:41.616Z,1528878821.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:42.002Z,1528878822.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:42.408Z,1528878822.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:42.822Z,1528878822.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:43.220Z,1528878823.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:43.615Z,1528878823.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:44.020Z,1528878824.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:44.407Z,1528878824.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:44.816Z,1528878824.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:45.207Z,1528878825.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:45.605Z,1528878825.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:46.014Z,1528878826.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:46.440Z,1528878826.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:46.816Z,1528878826.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:47.208Z,1528878827.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:47.624Z,1528878827.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:48.020Z,1528878828.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:48.406Z,1528878828.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:48.806Z,1528878828.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:49.218Z,1528878829.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:49.624Z,1528878829.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:50.018Z,1528878830.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:50.402Z,1528878830.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:50.824Z,1528878830.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:51.242Z,1528878831.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:51.607Z,1528878831.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:52.021Z,1528878832.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:52.424Z,1528878832.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:55.526Z,1528878835.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:55.670Z,1528878835.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:56.072Z,1528878836.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:56.474Z,1528878836.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:56.863Z,1528878836.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:57.278Z,1528878837.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:57.677Z,1528878837.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:58.076Z,1528878838.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:58.475Z,1528878838.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:58.865Z,1528878838.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:59.264Z,1528878839.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:33:59.676Z,1528878839.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:00.075Z,1528878840.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:00.488Z,1528878840.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:00.873Z,1528878840.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:01.265Z,1528878841.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:01.664Z,1528878841.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:02.071Z,1528878842.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:02.466Z,1528878842.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:02.872Z,1528878842.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:03.273Z,1528878843.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:03.677Z,1528878843.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:04.077Z,1528878844.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:04.475Z,1528878844.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:04.871Z,1528878844.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:05.269Z,1528878845.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:05.670Z,1528878845.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:06.074Z,1528878846.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:06.477Z,1528878846.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:06.878Z,1528878846.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:07.276Z,1528878847.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:07.669Z,1528878847.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:08.072Z,1528878848.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:08.478Z,1528878848.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:08.881Z,1528878848.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:09.278Z,1528878849.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:09.683Z,1528878849.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:10.081Z,1528878850.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:10.476Z,1528878850.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:10.873Z,1528878850.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:11.279Z,1528878851.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:11.676Z,1528878851.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:12.085Z,1528878852.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:12.488Z,1528878852.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:12.884Z,1528878852.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:13.259Z,1528878853.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:13.659Z,1528878853.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:14.060Z,1528878854.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:14.460Z,1528878854.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:14.862Z,1528878854.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:15.282Z,1528878855.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:15.686Z,1528878855.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:16.085Z,1528878856.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:16.463Z,1528878856.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:16.864Z,1528878856.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:17.263Z,1528878857.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:17.659Z,1528878857.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:18.086Z,1528878858.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:18.492Z,1528878858.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:18.875Z,1528878858.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:19.264Z,1528878859.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:19.668Z,1528878859.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:20.065Z,1528878860.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:20.463Z,1528878860.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:20.863Z,1528878860.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:21.270Z,1528878861.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:21.669Z,1528878861.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:22.071Z,1528878862.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:22.462Z,1528878862.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:22.866Z,1528878862.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:23.265Z,1528878863.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:23.666Z,1528878863.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:24.075Z,1528878864.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:24.473Z,1528878864.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:24.876Z,1528878864.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:25.263Z,1528878865.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:25.666Z,1528878865.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:26.093Z,1528878866.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:26.489Z,1528878866.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:26.865Z,1528878866.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:27.276Z,1528878867.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:27.675Z,1528878867.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:28.070Z,1528878868.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:28.472Z,1528878868.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:28.867Z,1528878868.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:29.292Z,1528878869.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:29.685Z,1528878869.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:30.093Z,1528878870.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:30.470Z,1528878870.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:30.892Z,1528878870.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:31.289Z,1528878871.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:31.665Z,1528878871.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:32.088Z,1528878872.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:32.492Z,1528878872.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:32.867Z,1528878872.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:33.276Z,1528878873.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:33.671Z,1528878873.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:34.090Z,1528878874.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:34.486Z,1528878874.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:34.868Z,1528878874.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:35.268Z,1528878875.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:35.693Z,1528878875.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:36.076Z,1528878876.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:36.473Z,1528878876.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:36.870Z,1528878876.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:37.291Z,1528878877.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:37.670Z,1528878877.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:38.066Z,1528878878.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:38.474Z,1528878878.474 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:38.474Z,1528878878.474 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 103
2018-06-13T08:34:38.474Z,1528878878.474 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:34:38.476Z,1528878878.476 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:38.476Z,1528878878.476 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 103
2018-06-13T08:34:38.476Z,1528878878.476 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:34:38.478Z,1528878878.478 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:38.478Z,1528878878.478 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 103
2018-06-13T08:34:38.478Z,1528878878.478 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:34:38.557Z,1528878878.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:34:38.557Z,1528878878.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:34:38.558Z,1528878878.558 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:34:38.977Z,1528878878.977 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:34:38.977Z,1528878878.977 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 103
2018-06-13T08:34:38.978Z,1528878878.978 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:34:38.978Z,1528878878.978 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 103
2018-06-13T08:34:38.978Z,1528878878.978 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:34:38.978Z,1528878878.978 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 103
2018-06-13T08:34:39.273Z,1528878879.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:34:39.273Z,1528878879.273 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:34:39.274Z,1528878879.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:34:39.274Z,1528878879.274 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:34:39.274Z,1528878879.274 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:34:39.275Z,1528878879.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:34:39.275Z,1528878879.275 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:34:39.275Z,1528878879.275 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:34:39.276Z,1528878879.276 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:34:39.680Z,1528878879.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:34:39.681Z,1528878879.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:40.078Z,1528878880.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:34:40.079Z,1528878880.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:40.485Z,1528878880.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:34:40.486Z,1528878880.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:40.868Z,1528878880.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:34:40.870Z,1528878880.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:41.269Z,1528878881.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:34:41.270Z,1528878881.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:41.671Z,1528878881.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:34:41.672Z,1528878881.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:42.104Z,1528878882.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:34:42.106Z,1528878882.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:42.481Z,1528878882.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:34:42.482Z,1528878882.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:42.877Z,1528878882.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:34:42.878Z,1528878882.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:43.281Z,1528878883.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:34:43.282Z,1528878883.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:43.678Z,1528878883.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:34:43.679Z,1528878883.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:44.071Z,1528878884.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:34:44.077Z,1528878884.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:44.475Z,1528878884.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:34:44.475Z,1528878884.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:44.880Z,1528878884.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:34:44.885Z,1528878884.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:45.294Z,1528878885.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:34:45.295Z,1528878885.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:45.688Z,1528878885.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:34:45.689Z,1528878885.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:46.087Z,1528878886.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:34:46.088Z,1528878886.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:46.481Z,1528878886.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:34:46.482Z,1528878886.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:46.864Z,1528878886.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:34:46.865Z,1528878886.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:47.260Z,1528878887.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:34:47.262Z,1528878887.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:47.660Z,1528878887.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:34:47.662Z,1528878887.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:48.072Z,1528878888.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:34:48.072Z,1528878888.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:48.496Z,1528878888.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:34:48.497Z,1528878888.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:48.868Z,1528878888.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:34:48.869Z,1528878888.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:49.260Z,1528878889.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:34:49.261Z,1528878889.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:49.665Z,1528878889.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:34:49.666Z,1528878889.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:50.063Z,1528878890.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:34:50.063Z,1528878890.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:50.460Z,1528878890.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:34:50.461Z,1528878890.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:50.864Z,1528878890.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:34:50.865Z,1528878890.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:51.274Z,1528878891.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:34:51.275Z,1528878891.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:51.668Z,1528878891.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:34:51.670Z,1528878891.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:52.076Z,1528878892.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:34:52.078Z,1528878892.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:52.468Z,1528878892.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:34:52.470Z,1528878892.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:55.575Z,1528878895.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T08:34:55.576Z,1528878895.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:55.580Z,1528878895.580 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T08:29:55.3Z
2018-06-13T08:34:55.580Z,1528878895.580 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T08:34:55.580Z,1528878895.580 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T08:34:55.734Z,1528878895.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T08:34:55.735Z,1528878895.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:56.914Z,1528878896.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T08:34:56.915Z,1528878896.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:57.072Z,1528878897.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T08:34:57.077Z,1528878897.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:57.462Z,1528878897.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T08:34:57.463Z,1528878897.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:57.853Z,1528878897.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T08:34:57.854Z,1528878897.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:58.244Z,1528878898.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T08:34:58.245Z,1528878898.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:58.653Z,1528878898.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:34:59.071Z,1528878899.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:02.192Z,1528878902.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:02.293Z,1528878902.293 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0120.lzma
2018-06-13T08:35:02.376Z,1528878902.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:02.740Z,1528878902.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:03.094Z,1528878903.094 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0120.lzma.bak
2018-06-13T08:35:03.094Z,1528878903.094 [DataOverHttps](INFO): SBD MOMSN=8328904
2018-06-13T08:35:03.169Z,1528878903.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:05.044Z,1528878905.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:05.228Z,1528878905.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:05.626Z,1528878905.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:08.836Z,1528878908.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:08.984Z,1528878908.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:09.376Z,1528878909.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:09.775Z,1528878909.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:10.175Z,1528878910.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:10.572Z,1528878910.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:10.978Z,1528878910.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:11.377Z,1528878911.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:11.784Z,1528878911.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:14.888Z,1528878914.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:14.976Z,1528878914.976 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0121.lzma
2018-06-13T08:35:15.049Z,1528878915.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:15.424Z,1528878915.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:15.774Z,1528878915.774 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0121.lzma.bak
2018-06-13T08:35:15.774Z,1528878915.774 [DataOverHttps](INFO): SBD MOMSN=8328906
2018-06-13T08:35:15.837Z,1528878915.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:17.792Z,1528878917.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:17.795Z,1528878917.795 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T08:35:17.795Z,1528878917.795 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T08:35:17.795Z,1528878917.795 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T08:35:17.951Z,1528878917.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:18.349Z,1528878918.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:21.675Z,1528878921.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:21.828Z,1528878921.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:22.210Z,1528878922.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:22.667Z,1528878922.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:23.095Z,1528878923.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:23.476Z,1528878923.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:23.836Z,1528878923.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:24.226Z,1528878924.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:24.621Z,1528878924.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:25.024Z,1528878925.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:25.418Z,1528878925.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:25.821Z,1528878925.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:26.223Z,1528878926.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:26.633Z,1528878926.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:27.026Z,1528878927.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:27.426Z,1528878927.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:27.824Z,1528878927.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:28.221Z,1528878928.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:28.618Z,1528878928.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:29.024Z,1528878929.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:29.440Z,1528878929.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:29.830Z,1528878929.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:30.226Z,1528878930.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:30.626Z,1528878930.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:31.026Z,1528878931.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:31.422Z,1528878931.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:31.824Z,1528878931.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:32.226Z,1528878932.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:32.630Z,1528878932.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:33.039Z,1528878933.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:33.419Z,1528878933.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:33.830Z,1528878933.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:34.226Z,1528878934.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:34.610Z,1528878934.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:35.036Z,1528878935.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:35.441Z,1528878935.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:35.823Z,1528878935.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:36.244Z,1528878936.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:36.617Z,1528878936.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:37.013Z,1528878937.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:37.425Z,1528878937.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:37.816Z,1528878937.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:38.226Z,1528878938.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:38.632Z,1528878938.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:39.032Z,1528878939.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:39.414Z,1528878939.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:39.820Z,1528878939.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:40.228Z,1528878940.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:40.614Z,1528878940.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:41.021Z,1528878941.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:41.426Z,1528878941.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:41.828Z,1528878941.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:42.229Z,1528878942.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:42.617Z,1528878942.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:43.020Z,1528878943.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:43.421Z,1528878943.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:43.816Z,1528878943.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:44.225Z,1528878944.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:44.628Z,1528878944.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:45.027Z,1528878945.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:45.415Z,1528878945.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:45.820Z,1528878945.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:46.229Z,1528878946.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:46.618Z,1528878946.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:47.024Z,1528878947.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:47.430Z,1528878947.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:47.832Z,1528878947.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:48.236Z,1528878948.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:48.620Z,1528878948.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:49.020Z,1528878949.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:49.424Z,1528878949.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:49.820Z,1528878949.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:50.227Z,1528878950.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:50.632Z,1528878950.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:51.028Z,1528878951.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:51.419Z,1528878951.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:51.821Z,1528878951.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:52.225Z,1528878952.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:52.624Z,1528878952.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:53.021Z,1528878953.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:53.431Z,1528878953.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:53.836Z,1528878953.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:54.239Z,1528878954.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:54.619Z,1528878954.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:55.028Z,1528878955.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:55.422Z,1528878955.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:55.823Z,1528878955.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:56.226Z,1528878956.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:56.633Z,1528878956.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:57.030Z,1528878957.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:57.418Z,1528878957.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:57.824Z,1528878957.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:58.236Z,1528878958.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:58.628Z,1528878958.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:59.032Z,1528878959.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:59.440Z,1528878959.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:35:59.830Z,1528878959.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:00.235Z,1528878960.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:00.624Z,1528878960.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:01.024Z,1528878961.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:01.466Z,1528878961.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:01.823Z,1528878961.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:02.232Z,1528878962.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:02.631Z,1528878962.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:03.027Z,1528878963.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:03.428Z,1528878963.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:03.828Z,1528878963.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:04.237Z,1528878964.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:04.628Z,1528878964.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:05.024Z,1528878965.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:05.436Z,1528878965.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:05.836Z,1528878965.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:06.239Z,1528878966.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:06.623Z,1528878966.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:07.028Z,1528878967.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:07.431Z,1528878967.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:07.828Z,1528878967.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:08.235Z,1528878968.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:08.634Z,1528878968.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:09.034Z,1528878969.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:09.428Z,1528878969.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:09.824Z,1528878969.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:10.224Z,1528878970.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:10.623Z,1528878970.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:11.028Z,1528878971.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:11.435Z,1528878971.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:11.834Z,1528878971.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:12.233Z,1528878972.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:12.623Z,1528878972.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:13.036Z,1528878973.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:13.427Z,1528878973.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:13.829Z,1528878973.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:14.230Z,1528878974.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:14.633Z,1528878974.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:15.038Z,1528878975.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:15.428Z,1528878975.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:15.823Z,1528878975.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:16.223Z,1528878976.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:16.626Z,1528878976.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:17.029Z,1528878977.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:17.443Z,1528878977.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:17.840Z,1528878977.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:18.264Z,1528878978.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:21.336Z,1528878981.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:21.479Z,1528878981.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:21.883Z,1528878981.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:22.292Z,1528878982.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:22.673Z,1528878982.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:23.069Z,1528878983.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:23.469Z,1528878983.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:23.868Z,1528878983.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:24.277Z,1528878984.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:24.682Z,1528878984.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:25.081Z,1528878985.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:25.474Z,1528878985.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:25.872Z,1528878985.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:26.268Z,1528878986.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:26.672Z,1528878986.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:27.076Z,1528878987.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:27.476Z,1528878987.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:27.884Z,1528878987.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:28.286Z,1528878988.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:28.676Z,1528878988.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:29.068Z,1528878989.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:29.480Z,1528878989.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:29.875Z,1528878989.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:30.278Z,1528878990.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:30.683Z,1528878990.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:31.081Z,1528878991.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:31.469Z,1528878991.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:31.872Z,1528878991.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:32.270Z,1528878992.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:32.674Z,1528878992.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:33.072Z,1528878993.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:33.474Z,1528878993.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:33.882Z,1528878993.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:34.287Z,1528878994.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:34.679Z,1528878994.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:35.078Z,1528878995.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:35.472Z,1528878995.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:35.883Z,1528878995.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:36.280Z,1528878996.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:36.682Z,1528878996.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:37.078Z,1528878997.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:37.483Z,1528878997.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:37.878Z,1528878997.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:38.264Z,1528878998.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:38.665Z,1528878998.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:39.086Z,1528878999.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:39.490Z,1528878999.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:39.888Z,1528878999.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:40.292Z,1528879000.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:40.692Z,1528879000.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:41.069Z,1528879001.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:41.488Z,1528879001.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:41.865Z,1528879001.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:42.290Z,1528879002.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:42.698Z,1528879002.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:43.070Z,1528879003.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:43.468Z,1528879003.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:43.894Z,1528879003.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:44.267Z,1528879004.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:44.668Z,1528879004.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:45.073Z,1528879005.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:45.493Z,1528879005.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:45.875Z,1528879005.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:46.298Z,1528879006.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:46.665Z,1528879006.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:47.091Z,1528879007.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:47.469Z,1528879007.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:47.866Z,1528879007.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:48.270Z,1528879008.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:48.695Z,1528879008.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:49.072Z,1528879009.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:49.466Z,1528879009.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:49.868Z,1528879009.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:50.293Z,1528879010.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:50.666Z,1528879010.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:51.068Z,1528879011.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:51.467Z,1528879011.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:51.895Z,1528879011.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:52.276Z,1528879012.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:52.668Z,1528879012.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:53.068Z,1528879013.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:53.491Z,1528879013.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:53.873Z,1528879013.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:54.277Z,1528879014.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:54.676Z,1528879014.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:55.096Z,1528879015.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:55.467Z,1528879015.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:55.869Z,1528879015.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:56.265Z,1528879016.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:56.663Z,1528879016.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:57.064Z,1528879017.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:57.477Z,1528879017.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:57.875Z,1528879017.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:58.303Z,1528879018.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:58.668Z,1528879018.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:59.064Z,1528879019.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:59.482Z,1528879019.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:36:59.860Z,1528879019.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:00.277Z,1528879020.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:00.678Z,1528879020.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:01.074Z,1528879021.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:01.465Z,1528879021.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:01.868Z,1528879021.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:02.265Z,1528879022.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:02.670Z,1528879022.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:03.067Z,1528879023.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:03.473Z,1528879023.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:03.878Z,1528879023.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:04.279Z,1528879024.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:04.662Z,1528879024.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:05.068Z,1528879025.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:05.486Z,1528879025.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:05.877Z,1528879025.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:06.275Z,1528879026.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:06.679Z,1528879026.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:07.075Z,1528879027.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:07.477Z,1528879027.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:07.873Z,1528879027.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:08.264Z,1528879028.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:08.677Z,1528879028.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:09.065Z,1528879029.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:09.483Z,1528879029.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:09.879Z,1528879029.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:10.292Z,1528879030.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:10.656Z,1528879030.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:11.058Z,1528879031.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:11.461Z,1528879031.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:11.860Z,1528879031.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:12.267Z,1528879032.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:12.676Z,1528879032.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:13.070Z,1528879033.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:13.463Z,1528879033.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:13.866Z,1528879033.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:14.261Z,1528879034.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:14.664Z,1528879034.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:15.067Z,1528879035.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:15.469Z,1528879035.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:15.873Z,1528879035.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:16.274Z,1528879036.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:16.661Z,1528879036.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:17.064Z,1528879037.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:17.476Z,1528879037.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:17.863Z,1528879037.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:18.280Z,1528879038.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:21.409Z,1528879041.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:21.570Z,1528879041.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:21.964Z,1528879041.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:22.368Z,1528879042.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:22.752Z,1528879042.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:23.163Z,1528879043.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:23.570Z,1528879043.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:23.968Z,1528879043.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:24.363Z,1528879044.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:24.764Z,1528879044.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:25.161Z,1528879045.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:25.561Z,1528879045.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:25.964Z,1528879045.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:26.362Z,1528879046.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:26.768Z,1528879046.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:27.178Z,1528879047.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:27.546Z,1528879047.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:27.946Z,1528879047.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:28.346Z,1528879048.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:28.776Z,1528879048.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:29.176Z,1528879049.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:29.573Z,1528879049.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:29.975Z,1528879049.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:30.373Z,1528879050.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:30.769Z,1528879050.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:31.145Z,1528879051.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:31.556Z,1528879051.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:31.979Z,1528879051.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:32.376Z,1528879052.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:32.776Z,1528879052.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:33.179Z,1528879053.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:33.571Z,1528879053.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:33.979Z,1528879053.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:34.351Z,1528879054.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:34.747Z,1528879054.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:35.172Z,1528879055.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:35.579Z,1528879055.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:35.976Z,1528879055.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:36.376Z,1528879056.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:36.774Z,1528879056.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:37.148Z,1528879057.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:37.551Z,1528879057.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:37.950Z,1528879057.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:38.383Z,1528879058.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:38.780Z,1528879058.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:39.178Z,1528879059.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:39.551Z,1528879059.551 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:39.551Z,1528879059.551 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 104
2018-06-13T08:37:39.551Z,1528879059.551 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:37:39.553Z,1528879059.553 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:39.553Z,1528879059.553 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 104
2018-06-13T08:37:39.553Z,1528879059.553 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:37:39.555Z,1528879059.555 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:39.555Z,1528879059.555 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 104
2018-06-13T08:37:39.555Z,1528879059.555 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:37:39.653Z,1528879059.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:37:39.653Z,1528879059.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:37:39.653Z,1528879059.653 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:37:40.058Z,1528879060.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:37:40.058Z,1528879060.058 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 104
2018-06-13T08:37:40.058Z,1528879060.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:37:40.058Z,1528879060.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 104
2018-06-13T08:37:40.059Z,1528879060.059 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:37:40.059Z,1528879060.059 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 104
2018-06-13T08:37:40.355Z,1528879060.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:37:40.355Z,1528879060.355 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:37:40.356Z,1528879060.356 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:37:40.356Z,1528879060.356 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:37:40.356Z,1528879060.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:37:40.357Z,1528879060.357 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:37:40.357Z,1528879060.357 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:37:40.358Z,1528879060.358 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:37:40.358Z,1528879060.358 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:37:40.753Z,1528879060.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:37:40.754Z,1528879060.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:41.155Z,1528879061.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:37:41.156Z,1528879061.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:41.591Z,1528879061.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:37:41.592Z,1528879061.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:41.987Z,1528879061.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:37:41.988Z,1528879061.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:42.363Z,1528879062.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:37:42.364Z,1528879062.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:42.767Z,1528879062.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:37:42.768Z,1528879062.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:43.183Z,1528879063.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:37:43.184Z,1528879063.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:43.555Z,1528879063.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:37:43.556Z,1528879063.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:43.959Z,1528879063.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:37:43.960Z,1528879063.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:44.364Z,1528879064.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:37:44.365Z,1528879064.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:44.782Z,1528879064.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:37:44.782Z,1528879064.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:45.165Z,1528879065.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:37:45.166Z,1528879065.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:45.552Z,1528879065.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:37:45.553Z,1528879065.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:45.955Z,1528879065.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:37:45.956Z,1528879065.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:46.385Z,1528879066.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:37:46.386Z,1528879066.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:46.754Z,1528879066.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:37:46.756Z,1528879066.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:47.157Z,1528879067.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:37:47.158Z,1528879067.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:47.562Z,1528879067.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:37:47.563Z,1528879067.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:47.981Z,1528879067.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:37:47.982Z,1528879067.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:48.361Z,1528879068.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:37:48.362Z,1528879068.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:48.756Z,1528879068.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:37:48.757Z,1528879068.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:49.154Z,1528879069.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:37:49.155Z,1528879069.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:49.583Z,1528879069.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:37:49.584Z,1528879069.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:49.952Z,1528879069.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:37:49.954Z,1528879069.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:50.365Z,1528879070.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:37:50.366Z,1528879070.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:50.762Z,1528879070.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:37:50.763Z,1528879070.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:51.180Z,1528879071.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:37:51.185Z,1528879071.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:51.548Z,1528879071.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:37:51.549Z,1528879071.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:51.961Z,1528879071.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:37:51.962Z,1528879071.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:52.367Z,1528879072.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:37:52.368Z,1528879072.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:52.769Z,1528879072.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:37:52.771Z,1528879072.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:53.156Z,1528879073.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:37:53.157Z,1528879073.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:53.570Z,1528879073.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:37:53.571Z,1528879073.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:53.965Z,1528879073.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:37:53.966Z,1528879073.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:54.391Z,1528879074.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:37:54.392Z,1528879074.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:54.752Z,1528879074.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:37:54.754Z,1528879074.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:55.161Z,1528879075.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:37:55.162Z,1528879075.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:55.560Z,1528879075.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:37:55.561Z,1528879075.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:55.951Z,1528879075.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T08:37:55.952Z,1528879075.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:56.361Z,1528879076.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T08:37:56.363Z,1528879076.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:56.770Z,1528879076.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T08:37:56.771Z,1528879076.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:57.169Z,1528879077.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T08:37:57.170Z,1528879077.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:57.564Z,1528879077.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T08:37:57.565Z,1528879077.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:57.952Z,1528879077.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T08:37:57.954Z,1528879077.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:58.351Z,1528879078.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T08:37:58.352Z,1528879078.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:58.756Z,1528879078.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T08:37:58.757Z,1528879078.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:59.160Z,1528879079.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T08:37:59.165Z,1528879079.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:59.562Z,1528879079.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:37:59.962Z,1528879079.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:00.366Z,1528879080.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:00.755Z,1528879080.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:01.152Z,1528879081.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:01.558Z,1528879081.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:01.958Z,1528879081.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:02.357Z,1528879082.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:02.765Z,1528879082.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:03.168Z,1528879083.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:03.554Z,1528879083.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:03.951Z,1528879083.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:04.354Z,1528879084.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:04.756Z,1528879084.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:05.152Z,1528879085.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:05.566Z,1528879085.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:05.965Z,1528879085.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:06.377Z,1528879086.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:06.754Z,1528879086.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:07.152Z,1528879087.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:07.552Z,1528879087.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:07.954Z,1528879087.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:08.373Z,1528879088.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:08.764Z,1528879088.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:09.164Z,1528879089.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:09.552Z,1528879089.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:09.952Z,1528879089.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:10.355Z,1528879090.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:10.753Z,1528879090.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:11.153Z,1528879091.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:11.565Z,1528879091.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:11.965Z,1528879091.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:12.360Z,1528879092.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:12.754Z,1528879092.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:13.153Z,1528879093.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:13.553Z,1528879093.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:13.960Z,1528879093.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:14.361Z,1528879094.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:14.764Z,1528879094.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:15.165Z,1528879095.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:15.559Z,1528879095.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:15.960Z,1528879095.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:16.353Z,1528879096.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:16.753Z,1528879096.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:17.151Z,1528879097.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:17.565Z,1528879097.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:17.969Z,1528879097.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:18.364Z,1528879098.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:21.463Z,1528879101.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:21.626Z,1528879101.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:22.018Z,1528879102.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:22.420Z,1528879102.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:22.813Z,1528879102.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:23.220Z,1528879103.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:23.602Z,1528879103.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:24.007Z,1528879104.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:24.413Z,1528879104.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:24.848Z,1528879104.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:25.220Z,1528879105.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:25.603Z,1528879105.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:26.007Z,1528879106.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:26.402Z,1528879106.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:26.805Z,1528879106.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:27.210Z,1528879107.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:27.615Z,1528879107.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:28.033Z,1528879108.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:28.425Z,1528879108.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:28.811Z,1528879108.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:29.217Z,1528879109.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:29.612Z,1528879109.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:30.008Z,1528879110.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:30.417Z,1528879110.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:30.828Z,1528879110.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:31.220Z,1528879111.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:31.612Z,1528879111.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:31.993Z,1528879111.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:32.396Z,1528879112.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:32.800Z,1528879112.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:33.197Z,1528879113.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:33.603Z,1528879113.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:34.029Z,1528879114.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:34.436Z,1528879114.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:34.794Z,1528879114.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:35.200Z,1528879115.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:35.606Z,1528879115.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:35.994Z,1528879115.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:36.408Z,1528879116.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:36.808Z,1528879116.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:37.204Z,1528879117.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:37.599Z,1528879117.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:38.000Z,1528879118.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:38.399Z,1528879118.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:38.799Z,1528879118.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:39.199Z,1528879119.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:39.604Z,1528879119.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:40.007Z,1528879120.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:40.407Z,1528879120.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:40.795Z,1528879120.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:41.199Z,1528879121.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:41.613Z,1528879121.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:41.995Z,1528879121.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:42.409Z,1528879122.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:42.816Z,1528879122.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:43.213Z,1528879123.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:43.601Z,1528879123.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:44.000Z,1528879124.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:44.399Z,1528879124.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:44.802Z,1528879124.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:45.205Z,1528879125.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:45.607Z,1528879125.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:46.016Z,1528879126.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:46.420Z,1528879126.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:46.800Z,1528879126.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:47.200Z,1528879127.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:47.612Z,1528879127.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:48.004Z,1528879128.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:48.408Z,1528879128.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:48.812Z,1528879128.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:49.210Z,1528879129.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:49.601Z,1528879129.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:50.004Z,1528879130.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:50.413Z,1528879130.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:50.813Z,1528879130.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:51.213Z,1528879131.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:51.601Z,1528879131.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:52.008Z,1528879132.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:52.420Z,1528879132.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:52.810Z,1528879132.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:53.216Z,1528879133.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:53.609Z,1528879133.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:54.000Z,1528879134.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:54.411Z,1528879134.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:54.820Z,1528879134.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:55.207Z,1528879135.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:55.605Z,1528879135.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:55.992Z,1528879135.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:56.416Z,1528879136.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:56.820Z,1528879136.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:57.223Z,1528879137.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:57.596Z,1528879137.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:57.995Z,1528879137.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:58.423Z,1528879138.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:58.821Z,1528879138.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:59.220Z,1528879139.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:59.597Z,1528879139.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:38:59.991Z,1528879139.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:00.423Z,1528879140.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:00.808Z,1528879140.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:01.204Z,1528879141.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:01.605Z,1528879141.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:01.999Z,1528879141.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:02.404Z,1528879142.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:02.807Z,1528879142.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:03.231Z,1528879143.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:03.600Z,1528879143.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:03.999Z,1528879143.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:04.407Z,1528879144.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:04.808Z,1528879144.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:05.208Z,1528879145.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:05.599Z,1528879145.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:05.996Z,1528879145.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:06.407Z,1528879146.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:06.807Z,1528879146.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:07.208Z,1528879147.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:07.600Z,1528879147.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:07.999Z,1528879147.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:08.408Z,1528879148.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:08.807Z,1528879148.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:09.207Z,1528879149.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:09.602Z,1528879149.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:09.999Z,1528879149.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:10.416Z,1528879150.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:10.816Z,1528879150.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:11.208Z,1528879151.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:11.601Z,1528879151.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:11.997Z,1528879151.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:12.408Z,1528879152.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:12.809Z,1528879152.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:13.207Z,1528879153.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:13.611Z,1528879153.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:14.004Z,1528879154.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:14.407Z,1528879154.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:14.808Z,1528879154.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:15.216Z,1528879155.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:15.599Z,1528879155.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:16.000Z,1528879156.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:16.416Z,1528879156.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:16.808Z,1528879156.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:17.209Z,1528879157.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:17.601Z,1528879157.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:17.000Z,1528879158.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:18.407Z,1528879158.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:21.546Z,1528879161.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:21.708Z,1528879161.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:22.098Z,1528879162.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:22.490Z,1528879162.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:22.892Z,1528879162.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:23.286Z,1528879163.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:23.703Z,1528879163.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:24.109Z,1528879164.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:24.491Z,1528879164.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:24.890Z,1528879164.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:25.276Z,1528879165.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:25.677Z,1528879165.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:26.077Z,1528879166.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:26.479Z,1528879166.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:26.910Z,1528879166.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:27.287Z,1528879167.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:27.684Z,1528879167.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:28.078Z,1528879168.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:28.480Z,1528879168.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:28.876Z,1528879168.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:29.290Z,1528879169.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:29.690Z,1528879169.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:30.091Z,1528879170.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:30.488Z,1528879170.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:30.881Z,1528879170.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:31.276Z,1528879171.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:31.679Z,1528879171.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:32.093Z,1528879172.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:32.490Z,1528879172.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:32.896Z,1528879172.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:33.297Z,1528879173.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:33.690Z,1528879173.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:34.086Z,1528879174.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:34.493Z,1528879174.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:34.889Z,1528879174.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:35.292Z,1528879175.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:35.702Z,1528879175.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:36.094Z,1528879176.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:36.511Z,1528879176.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:36.876Z,1528879176.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:37.271Z,1528879177.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:37.676Z,1528879177.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:38.076Z,1528879178.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:38.483Z,1528879178.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:38.886Z,1528879178.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:39.287Z,1528879179.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:39.676Z,1528879179.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:40.080Z,1528879180.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:40.479Z,1528879180.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:40.875Z,1528879180.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:41.280Z,1528879181.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:41.688Z,1528879181.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:42.083Z,1528879182.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:42.483Z,1528879182.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:42.879Z,1528879182.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:43.276Z,1528879183.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:43.678Z,1528879183.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:44.084Z,1528879184.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:44.480Z,1528879184.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:44.887Z,1528879184.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:45.287Z,1528879185.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:45.676Z,1528879185.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:46.078Z,1528879186.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:46.488Z,1528879186.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:46.888Z,1528879186.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:47.288Z,1528879187.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:47.680Z,1528879187.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:48.076Z,1528879188.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:48.488Z,1528879188.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:48.887Z,1528879188.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:49.288Z,1528879189.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:49.679Z,1528879189.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:50.080Z,1528879190.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:50.488Z,1528879190.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:50.887Z,1528879190.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:51.292Z,1528879191.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:51.679Z,1528879191.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:52.084Z,1528879192.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:52.487Z,1528879192.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:52.888Z,1528879192.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:53.288Z,1528879193.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:53.679Z,1528879193.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:54.077Z,1528879194.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:54.488Z,1528879194.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:54.887Z,1528879194.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:55.283Z,1528879195.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:55.679Z,1528879195.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:56.080Z,1528879196.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:56.488Z,1528879196.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:56.887Z,1528879196.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:57.287Z,1528879197.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:57.677Z,1528879197.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:58.080Z,1528879198.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:58.487Z,1528879198.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:58.888Z,1528879198.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:59.288Z,1528879199.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:39:59.681Z,1528879199.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:00.085Z,1528879200.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:00.489Z,1528879200.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:00.890Z,1528879200.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:01.292Z,1528879201.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:01.683Z,1528879201.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:02.081Z,1528879202.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:02.492Z,1528879202.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:02.896Z,1528879202.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:03.289Z,1528879203.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:03.687Z,1528879203.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:04.079Z,1528879204.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:04.496Z,1528879204.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:04.890Z,1528879204.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:05.285Z,1528879205.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:05.684Z,1528879205.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:06.076Z,1528879206.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:06.492Z,1528879206.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:06.892Z,1528879206.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:07.292Z,1528879207.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:07.680Z,1528879207.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:08.084Z,1528879208.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:08.486Z,1528879208.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:08.892Z,1528879208.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:09.292Z,1528879209.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:09.680Z,1528879209.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:10.084Z,1528879210.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:10.489Z,1528879210.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:10.892Z,1528879210.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:11.292Z,1528879211.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:11.684Z,1528879211.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:12.076Z,1528879212.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:12.488Z,1528879212.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:12.892Z,1528879212.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:13.287Z,1528879213.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:13.679Z,1528879213.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:14.079Z,1528879214.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:14.485Z,1528879214.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:14.892Z,1528879214.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:15.296Z,1528879215.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:15.676Z,1528879215.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:16.079Z,1528879216.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:16.480Z,1528879216.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:16.888Z,1528879216.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:17.292Z,1528879217.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:17.688Z,1528879217.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:18.082Z,1528879218.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:18.085Z,1528879218.085 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T08:40:18.086Z,1528879218.086 [Default:CheckIn:C.Wait] Stopped
2018-06-13T08:40:18.086Z,1528879218.086 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T08:40:18.086Z,1528879218.086 [Default:CheckIn:D] Running Loop=1
2018-06-13T08:40:18.478Z,1528879218.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:18.481Z,1528879218.481 [Default:CheckIn:D] Stopped
2018-06-13T08:40:18.481Z,1528879218.481 [Default:CheckIn:E] Running Loop=1
2018-06-13T08:40:21.588Z,1528879221.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:21.592Z,1528879221.592 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 313.083919 min 
2018-06-13T08:40:21.592Z,1528879221.592 [Default:CheckIn:E] Stopped
2018-06-13T08:40:21.592Z,1528879221.592 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T08:40:21.592Z,1528879221.592 [Default:CheckIn] Stopped
2018-06-13T08:40:21.592Z,1528879221.592 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T08:40:21.593Z,1528879221.593 [Default:CheckIn](INFO): Running loop #31
2018-06-13T08:40:21.593Z,1528879221.593 [Default:CheckIn] Running Loop=31
2018-06-13T08:40:21.593Z,1528879221.593 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T08:40:21.593Z,1528879221.593 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T08:40:21.768Z,1528879221.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:22.167Z,1528879222.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:22.578Z,1528879222.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:22.943Z,1528879222.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:23.340Z,1528879223.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:23.739Z,1528879223.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:24.142Z,1528879224.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:24.547Z,1528879224.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:24.950Z,1528879224.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:25.356Z,1528879225.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:25.744Z,1528879225.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:26.143Z,1528879226.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:26.552Z,1528879226.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:26.951Z,1528879226.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:27.352Z,1528879227.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:27.743Z,1528879227.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:28.144Z,1528879228.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:28.551Z,1528879228.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:28.951Z,1528879228.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:29.351Z,1528879229.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:29.742Z,1528879229.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:30.148Z,1528879230.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:30.551Z,1528879230.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:30.956Z,1528879230.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:31.356Z,1528879231.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:31.743Z,1528879231.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:32.146Z,1528879232.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:32.556Z,1528879232.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:32.956Z,1528879232.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:33.351Z,1528879233.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:33.746Z,1528879233.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:34.142Z,1528879234.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:34.556Z,1528879234.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:34.956Z,1528879234.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:35.352Z,1528879235.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:35.744Z,1528879235.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:36.140Z,1528879236.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:36.553Z,1528879236.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:36.964Z,1528879236.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:37.353Z,1528879237.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:37.745Z,1528879237.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:38.152Z,1528879238.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:38.553Z,1528879238.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:38.957Z,1528879238.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:39.357Z,1528879239.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:39.745Z,1528879239.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:40.144Z,1528879240.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:40.557Z,1528879240.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:40.557Z,1528879240.557 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 105
2018-06-13T08:40:40.557Z,1528879240.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:40:40.559Z,1528879240.559 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:40.559Z,1528879240.559 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 105
2018-06-13T08:40:40.559Z,1528879240.559 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:40:40.560Z,1528879240.560 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:40.561Z,1528879240.561 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 105
2018-06-13T08:40:40.561Z,1528879240.561 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:40:40.633Z,1528879240.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:40:40.633Z,1528879240.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:40:40.633Z,1528879240.633 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:40:41.025Z,1528879241.025 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:40:41.025Z,1528879241.025 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 105
2018-06-13T08:40:41.026Z,1528879241.026 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:40:41.026Z,1528879241.026 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 105
2018-06-13T08:40:41.026Z,1528879241.026 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:40:41.026Z,1528879241.026 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 105
2018-06-13T08:40:41.349Z,1528879241.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:40:41.350Z,1528879241.350 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:40:41.350Z,1528879241.350 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:40:41.350Z,1528879241.350 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:40:41.351Z,1528879241.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:40:41.351Z,1528879241.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:40:41.351Z,1528879241.351 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:40:41.352Z,1528879241.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:40:41.352Z,1528879241.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:40:41.736Z,1528879241.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:40:41.761Z,1528879241.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:42.136Z,1528879242.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:40:42.137Z,1528879242.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:42.556Z,1528879242.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:40:42.557Z,1528879242.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:42.958Z,1528879242.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:40:42.959Z,1528879242.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:43.364Z,1528879243.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:40:43.365Z,1528879243.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:43.740Z,1528879243.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:40:43.742Z,1528879243.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:44.140Z,1528879244.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:40:44.141Z,1528879244.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:44.561Z,1528879244.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:40:44.562Z,1528879244.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:44.964Z,1528879244.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:40:44.964Z,1528879244.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:45.367Z,1528879245.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:40:45.368Z,1528879245.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:45.767Z,1528879245.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:40:45.768Z,1528879245.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:46.144Z,1528879246.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:40:46.144Z,1528879246.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:46.566Z,1528879246.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:40:46.567Z,1528879246.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:46.962Z,1528879246.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:40:46.963Z,1528879246.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:47.366Z,1528879247.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:40:47.367Z,1528879247.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:47.743Z,1528879247.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:40:47.744Z,1528879247.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:48.138Z,1528879248.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:40:48.139Z,1528879248.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:48.552Z,1528879248.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:40:48.569Z,1528879248.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:48.955Z,1528879248.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:40:48.956Z,1528879248.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:49.344Z,1528879249.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:40:49.345Z,1528879249.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:49.744Z,1528879249.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:40:49.745Z,1528879249.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:50.142Z,1528879250.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:40:50.143Z,1528879250.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:50.542Z,1528879250.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:40:50.543Z,1528879250.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:50.950Z,1528879250.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:40:50.951Z,1528879250.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:51.380Z,1528879251.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:40:51.381Z,1528879251.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:51.751Z,1528879251.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:40:51.752Z,1528879251.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:52.142Z,1528879252.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:40:52.143Z,1528879252.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:52.551Z,1528879252.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:40:52.552Z,1528879252.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:52.952Z,1528879252.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:40:52.953Z,1528879252.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:53.356Z,1528879253.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:40:53.373Z,1528879253.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:53.745Z,1528879253.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:40:53.746Z,1528879253.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:54.139Z,1528879254.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:40:54.140Z,1528879254.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:54.556Z,1528879254.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:40:54.557Z,1528879254.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:54.953Z,1528879254.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:40:54.954Z,1528879254.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:55.360Z,1528879255.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:40:55.377Z,1528879255.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:55.743Z,1528879255.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:40:55.744Z,1528879255.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:56.146Z,1528879256.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:40:56.147Z,1528879256.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:56.548Z,1528879256.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:40:56.550Z,1528879256.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:56.956Z,1528879256.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T08:40:56.957Z,1528879256.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:57.352Z,1528879257.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T08:40:57.353Z,1528879257.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:57.740Z,1528879257.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T08:40:57.741Z,1528879257.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:58.143Z,1528879258.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T08:40:58.144Z,1528879258.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:58.549Z,1528879258.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T08:40:58.550Z,1528879258.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:58.953Z,1528879258.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T08:40:58.954Z,1528879258.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:59.356Z,1528879259.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T08:40:59.357Z,1528879259.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:40:59.759Z,1528879259.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T08:40:59.760Z,1528879259.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:00.156Z,1528879260.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T08:41:00.157Z,1528879260.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:00.553Z,1528879260.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T08:41:00.554Z,1528879260.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:00.952Z,1528879260.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:01.356Z,1528879261.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:01.755Z,1528879261.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:02.158Z,1528879262.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:02.551Z,1528879262.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:02.956Z,1528879262.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:03.354Z,1528879263.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:03.749Z,1528879263.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:04.158Z,1528879264.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:04.561Z,1528879264.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:04.964Z,1528879264.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:05.359Z,1528879265.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:05.762Z,1528879265.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:06.132Z,1528879266.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:06.532Z,1528879266.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:06.966Z,1528879266.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:07.357Z,1528879267.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:07.756Z,1528879267.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:08.168Z,1528879268.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:08.558Z,1528879268.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:08.956Z,1528879268.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:09.337Z,1528879269.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:09.737Z,1528879269.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:10.137Z,1528879270.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:10.564Z,1528879270.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:10.967Z,1528879270.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:11.351Z,1528879271.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:11.752Z,1528879271.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:12.140Z,1528879272.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:12.547Z,1528879272.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:12.954Z,1528879272.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:13.340Z,1528879273.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:13.751Z,1528879273.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:14.152Z,1528879274.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:14.556Z,1528879274.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:14.958Z,1528879274.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:15.356Z,1528879275.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:15.748Z,1528879275.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:16.145Z,1528879276.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:16.557Z,1528879276.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:16.953Z,1528879276.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:17.357Z,1528879277.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:17.763Z,1528879277.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:18.154Z,1528879278.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:18.560Z,1528879278.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:21.757Z,1528879281.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:21.915Z,1528879281.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:22.328Z,1528879282.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:22.718Z,1528879282.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:23.108Z,1528879283.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:23.502Z,1528879283.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:23.912Z,1528879283.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:24.309Z,1528879284.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:24.720Z,1528879284.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:25.112Z,1528879285.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:25.512Z,1528879285.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:25.911Z,1528879285.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:26.303Z,1528879286.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:26.705Z,1528879286.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:27.092Z,1528879287.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:27.527Z,1528879287.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:27.916Z,1528879287.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:28.315Z,1528879288.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:28.719Z,1528879288.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:29.123Z,1528879289.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:29.493Z,1528879289.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:29.914Z,1528879289.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:30.296Z,1528879290.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:30.728Z,1528879290.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:31.122Z,1528879291.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:31.527Z,1528879291.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:31.920Z,1528879291.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:32.324Z,1528879292.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:32.694Z,1528879292.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:33.098Z,1528879293.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:33.500Z,1528879293.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:33.928Z,1528879293.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:34.306Z,1528879294.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:34.708Z,1528879294.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:35.096Z,1528879295.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:35.494Z,1528879295.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:35.897Z,1528879295.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:36.294Z,1528879296.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:36.704Z,1528879296.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:37.132Z,1528879297.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:37.501Z,1528879297.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:37.895Z,1528879297.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:38.304Z,1528879298.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:38.700Z,1528879298.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:39.098Z,1528879299.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:39.502Z,1528879299.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:39.906Z,1528879299.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:40.303Z,1528879300.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:40.703Z,1528879300.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:41.096Z,1528879301.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:41.502Z,1528879301.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:41.896Z,1528879301.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:42.294Z,1528879302.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:42.729Z,1528879302.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:43.110Z,1528879303.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:43.502Z,1528879303.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:43.896Z,1528879303.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:44.296Z,1528879304.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:44.691Z,1528879304.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:45.096Z,1528879305.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:45.499Z,1528879305.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:45.904Z,1528879305.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:46.309Z,1528879306.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:46.705Z,1528879306.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:47.104Z,1528879307.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:47.504Z,1528879307.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:47.911Z,1528879307.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:48.296Z,1528879308.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:48.716Z,1528879308.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:49.141Z,1528879309.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:49.509Z,1528879309.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:49.899Z,1528879309.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:50.308Z,1528879310.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:50.692Z,1528879310.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:51.096Z,1528879311.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:51.508Z,1528879311.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:51.906Z,1528879311.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:52.308Z,1528879312.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:52.713Z,1528879312.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:53.096Z,1528879313.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:53.495Z,1528879313.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:53.908Z,1528879313.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:54.292Z,1528879314.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:54.708Z,1528879314.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:55.108Z,1528879315.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:55.505Z,1528879315.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:55.898Z,1528879315.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:56.299Z,1528879316.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:56.702Z,1528879316.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:57.097Z,1528879317.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:57.507Z,1528879317.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:57.901Z,1528879317.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:58.308Z,1528879318.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:58.716Z,1528879318.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:59.101Z,1528879319.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:59.496Z,1528879319.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:41:59.902Z,1528879319.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:00.301Z,1528879320.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:00.705Z,1528879320.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:01.109Z,1528879321.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:01.504Z,1528879321.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:01.901Z,1528879321.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:02.304Z,1528879322.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:02.705Z,1528879322.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:03.108Z,1528879323.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:03.511Z,1528879323.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:03.900Z,1528879323.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:04.308Z,1528879324.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:04.720Z,1528879324.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:05.110Z,1528879325.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:05.506Z,1528879325.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:05.912Z,1528879325.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:06.305Z,1528879326.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:06.714Z,1528879326.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:07.113Z,1528879327.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:07.511Z,1528879327.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:07.893Z,1528879327.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:08.293Z,1528879328.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:08.699Z,1528879328.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:09.118Z,1528879329.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:09.519Z,1528879329.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:09.896Z,1528879329.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:10.291Z,1528879330.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:10.724Z,1528879330.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:11.103Z,1528879331.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:11.499Z,1528879331.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:11.906Z,1528879331.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:12.294Z,1528879332.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:12.704Z,1528879332.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:13.055Z,1528879333.055 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T08:42:13.055Z,1528879333.055 [NAL9602] Data Fault, FailCount= 4
2018-06-13T08:42:13.055Z,1528879333.055 [NAL9602](ERROR): Data Fault
2018-06-13T08:42:13.111Z,1528879333.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:13.217Z,1528879333.217 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T08:42:13.454Z,1528879333.454 [NAL9602](INFO): Powering down
2018-06-13T08:42:13.508Z,1528879333.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:13.894Z,1528879333.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:14.294Z,1528879334.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:14.371Z,1528879334.371 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T08:42:14.371Z,1528879334.371 [NAL9602] No Fault, FailCount= 4
2018-06-13T08:42:14.690Z,1528879334.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:15.096Z,1528879335.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:15.494Z,1528879335.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:15.891Z,1528879335.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:16.296Z,1528879336.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:16.694Z,1528879336.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:17.090Z,1528879337.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:17.495Z,1528879337.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:17.893Z,1528879337.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:18.294Z,1528879338.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:18.699Z,1528879338.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:19.095Z,1528879339.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:19.495Z,1528879339.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:19.900Z,1528879339.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:23.004Z,1528879343.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:23.187Z,1528879343.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:23.592Z,1528879343.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:23.993Z,1528879343.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:24.364Z,1528879344.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:24.787Z,1528879344.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:25.168Z,1528879345.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:25.564Z,1528879345.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:25.993Z,1528879345.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:26.372Z,1528879346.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:26.767Z,1528879346.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:27.173Z,1528879347.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:27.571Z,1528879347.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:27.973Z,1528879347.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:28.372Z,1528879348.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:28.767Z,1528879348.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:29.166Z,1528879349.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:29.577Z,1528879349.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:29.973Z,1528879349.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:30.366Z,1528879350.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:30.774Z,1528879350.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:31.165Z,1528879351.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:31.567Z,1528879351.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:31.972Z,1528879351.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:32.372Z,1528879352.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:32.768Z,1528879352.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:33.172Z,1528879353.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:33.566Z,1528879353.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:33.966Z,1528879353.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:34.371Z,1528879354.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:34.772Z,1528879354.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:35.166Z,1528879355.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:35.570Z,1528879355.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:35.965Z,1528879355.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:36.366Z,1528879356.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:36.771Z,1528879356.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:37.172Z,1528879357.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:37.567Z,1528879357.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:37.971Z,1528879357.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:38.372Z,1528879358.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:38.766Z,1528879358.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:39.171Z,1528879359.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:39.566Z,1528879359.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:39.966Z,1528879359.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:40.370Z,1528879360.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:40.766Z,1528879360.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:41.172Z,1528879361.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:41.572Z,1528879361.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:41.966Z,1528879361.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:42.371Z,1528879362.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:42.771Z,1528879362.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:43.168Z,1528879363.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:43.530Z,1528879363.530 [NAL9602](INFO): Powering up NAL9602
2018-06-13T08:42:43.575Z,1528879363.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:43.971Z,1528879363.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:44.366Z,1528879364.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:44.766Z,1528879364.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:45.172Z,1528879365.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:45.565Z,1528879365.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:45.972Z,1528879365.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:46.375Z,1528879366.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:46.772Z,1528879366.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:47.174Z,1528879367.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:47.571Z,1528879367.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:47.965Z,1528879367.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:48.366Z,1528879368.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:48.771Z,1528879368.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:49.166Z,1528879369.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:49.566Z,1528879369.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:49.970Z,1528879369.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:50.365Z,1528879370.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:50.775Z,1528879370.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:51.172Z,1528879371.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:51.566Z,1528879371.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:51.971Z,1528879371.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:52.370Z,1528879372.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:52.765Z,1528879372.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:53.166Z,1528879373.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:53.571Z,1528879373.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:53.967Z,1528879373.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:54.376Z,1528879374.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:54.730Z,1528879374.730 [NAL9602](INFO): NAL9602 initialized
2018-06-13T08:42:54.784Z,1528879374.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:55.173Z,1528879375.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:55.579Z,1528879375.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:55.976Z,1528879375.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:56.371Z,1528879376.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:56.772Z,1528879376.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:57.171Z,1528879377.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:57.579Z,1528879377.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:57.980Z,1528879377.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:58.375Z,1528879378.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:58.780Z,1528879378.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:59.170Z,1528879379.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:59.571Z,1528879379.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:42:59.974Z,1528879379.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:00.380Z,1528879380.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:00.779Z,1528879380.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:01.179Z,1528879381.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:01.572Z,1528879381.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:01.972Z,1528879381.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:02.375Z,1528879382.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:02.773Z,1528879382.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:03.172Z,1528879383.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:03.605Z,1528879383.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:03.993Z,1528879383.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:04.380Z,1528879384.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:04.772Z,1528879384.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:05.171Z,1528879385.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:05.582Z,1528879385.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:05.975Z,1528879385.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:06.377Z,1528879386.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:06.779Z,1528879386.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:07.179Z,1528879387.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:07.579Z,1528879387.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:07.972Z,1528879387.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:08.394Z,1528879388.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:08.772Z,1528879388.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:09.172Z,1528879389.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:09.592Z,1528879389.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:09.981Z,1528879389.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:10.397Z,1528879390.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:10.782Z,1528879390.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:11.178Z,1528879391.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:11.584Z,1528879391.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:11.977Z,1528879391.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:12.392Z,1528879392.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:12.786Z,1528879392.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:13.187Z,1528879393.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:13.560Z,1528879393.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:13.964Z,1528879393.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:14.366Z,1528879394.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:14.769Z,1528879394.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:15.172Z,1528879395.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:15.596Z,1528879395.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:15.979Z,1528879395.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:16.375Z,1528879396.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:16.771Z,1528879396.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:17.171Z,1528879397.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:17.570Z,1528879397.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:17.991Z,1528879397.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:18.400Z,1528879398.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:18.782Z,1528879398.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:19.183Z,1528879399.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:19.569Z,1528879399.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:19.974Z,1528879399.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:23.106Z,1528879403.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:23.267Z,1528879403.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:23.664Z,1528879403.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:24.071Z,1528879404.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:24.476Z,1528879404.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:24.856Z,1528879404.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:25.254Z,1528879405.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:25.641Z,1528879405.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:26.068Z,1528879406.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:26.472Z,1528879406.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:26.851Z,1528879406.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:27.274Z,1528879407.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:27.652Z,1528879407.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:28.044Z,1528879408.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:28.445Z,1528879408.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:28.847Z,1528879408.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:29.249Z,1528879409.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:29.655Z,1528879409.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:30.059Z,1528879410.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:30.447Z,1528879410.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:30.848Z,1528879410.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:31.256Z,1528879411.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:31.655Z,1528879411.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:32.057Z,1528879412.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:32.463Z,1528879412.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:32.852Z,1528879412.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:33.256Z,1528879413.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:33.667Z,1528879413.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:34.064Z,1528879414.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:34.452Z,1528879414.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:34.861Z,1528879414.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:35.264Z,1528879415.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:35.674Z,1528879415.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:36.071Z,1528879416.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:36.448Z,1528879416.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:36.848Z,1528879416.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:37.271Z,1528879417.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:37.655Z,1528879417.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:38.051Z,1528879418.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:38.450Z,1528879418.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:38.844Z,1528879418.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:39.252Z,1528879419.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:39.655Z,1528879419.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:40.056Z,1528879420.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:40.455Z,1528879420.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:40.848Z,1528879420.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:41.244Z,1528879421.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:41.647Z,1528879421.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:41.647Z,1528879421.647 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 106
2018-06-13T08:43:41.647Z,1528879421.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:43:41.649Z,1528879421.649 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:41.650Z,1528879421.650 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 106
2018-06-13T08:43:41.650Z,1528879421.650 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:43:41.651Z,1528879421.651 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:41.651Z,1528879421.651 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 106
2018-06-13T08:43:41.651Z,1528879421.651 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:43:41.725Z,1528879421.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:43:41.725Z,1528879421.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:43:41.726Z,1528879421.726 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:43:42.129Z,1528879422.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:43:42.129Z,1528879422.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 106
2018-06-13T08:43:42.130Z,1528879422.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:43:42.130Z,1528879422.130 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 106
2018-06-13T08:43:42.130Z,1528879422.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:43:42.130Z,1528879422.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 106
2018-06-13T08:43:42.453Z,1528879422.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:43:42.453Z,1528879422.453 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:43:42.454Z,1528879422.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:43:42.454Z,1528879422.454 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:43:42.455Z,1528879422.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:43:42.455Z,1528879422.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:43:42.455Z,1528879422.455 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:43:42.456Z,1528879422.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:43:42.456Z,1528879422.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:43:42.856Z,1528879422.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:43:42.858Z,1528879422.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:43.261Z,1528879423.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:43:43.262Z,1528879423.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:43.654Z,1528879423.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:43:43.654Z,1528879423.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:44.047Z,1528879424.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:43:44.048Z,1528879424.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:44.451Z,1528879424.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:43:44.452Z,1528879424.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:44.853Z,1528879424.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:43:44.854Z,1528879424.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:45.249Z,1528879425.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:43:45.250Z,1528879425.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:45.674Z,1528879425.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:43:45.675Z,1528879425.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:46.060Z,1528879426.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:43:46.062Z,1528879426.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:46.457Z,1528879426.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:43:46.458Z,1528879426.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:46.857Z,1528879426.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:43:46.858Z,1528879426.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:47.253Z,1528879427.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:43:47.254Z,1528879427.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:47.654Z,1528879427.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:43:47.655Z,1528879427.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:48.055Z,1528879428.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:43:48.056Z,1528879428.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:48.461Z,1528879428.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:43:48.462Z,1528879428.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:48.859Z,1528879428.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:43:48.860Z,1528879428.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:49.262Z,1528879429.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:43:49.263Z,1528879429.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:49.655Z,1528879429.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:43:49.655Z,1528879429.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:50.052Z,1528879430.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:43:50.053Z,1528879430.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:50.455Z,1528879430.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:43:50.456Z,1528879430.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:50.853Z,1528879430.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:43:50.854Z,1528879430.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:51.250Z,1528879431.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:43:51.251Z,1528879431.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:51.672Z,1528879431.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:43:51.677Z,1528879431.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:52.064Z,1528879432.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:43:52.065Z,1528879432.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:52.466Z,1528879432.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:43:52.467Z,1528879432.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:52.841Z,1528879432.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:43:52.842Z,1528879432.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:53.241Z,1528879433.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:43:53.242Z,1528879433.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:53.644Z,1528879433.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:43:53.645Z,1528879433.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:54.044Z,1528879434.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:43:54.046Z,1528879434.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:54.451Z,1528879434.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:43:54.452Z,1528879434.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:54.855Z,1528879434.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:43:54.856Z,1528879434.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:55.251Z,1528879435.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:43:55.252Z,1528879435.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:55.652Z,1528879435.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:43:55.653Z,1528879435.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:56.048Z,1528879436.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:43:56.049Z,1528879436.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:56.447Z,1528879436.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:43:56.448Z,1528879436.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:56.851Z,1528879436.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:43:56.852Z,1528879436.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:57.260Z,1528879437.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:43:57.265Z,1528879437.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:57.656Z,1528879437.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:43:57.657Z,1528879437.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:58.056Z,1528879438.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T08:43:58.057Z,1528879438.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:58.455Z,1528879438.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T08:43:58.456Z,1528879438.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:58.848Z,1528879438.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T08:43:58.849Z,1528879438.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:59.244Z,1528879439.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T08:43:59.246Z,1528879439.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:43:59.648Z,1528879439.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T08:43:59.650Z,1528879439.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:00.048Z,1528879440.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T08:44:00.049Z,1528879440.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:00.455Z,1528879440.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T08:44:00.456Z,1528879440.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:00.860Z,1528879440.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T08:44:00.861Z,1528879440.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:01.264Z,1528879441.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T08:44:01.266Z,1528879441.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:01.643Z,1528879441.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T08:44:01.644Z,1528879441.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:02.052Z,1528879442.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:02.452Z,1528879442.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:02.845Z,1528879442.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:03.248Z,1528879443.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:03.668Z,1528879443.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:04.064Z,1528879444.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:04.456Z,1528879444.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:04.852Z,1528879444.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:05.244Z,1528879445.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:05.647Z,1528879445.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:06.057Z,1528879446.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:06.458Z,1528879446.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:06.868Z,1528879446.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:07.262Z,1528879447.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:07.648Z,1528879447.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:08.057Z,1528879448.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:08.461Z,1528879448.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:08.861Z,1528879448.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:09.242Z,1528879449.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:09.661Z,1528879449.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:10.072Z,1528879450.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:10.462Z,1528879450.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:10.859Z,1528879450.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:11.243Z,1528879451.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:11.644Z,1528879451.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:12.044Z,1528879452.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:12.451Z,1528879452.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:12.871Z,1528879452.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:13.255Z,1528879453.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:13.658Z,1528879453.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:14.045Z,1528879454.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:14.452Z,1528879454.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:14.843Z,1528879454.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:15.247Z,1528879455.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:15.683Z,1528879455.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:16.052Z,1528879456.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:16.480Z,1528879456.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:16.848Z,1528879456.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:17.244Z,1528879457.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:17.647Z,1528879457.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:18.057Z,1528879458.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:18.456Z,1528879458.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:18.864Z,1528879458.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:21.987Z,1528879461.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:22.146Z,1528879462.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:22.537Z,1528879462.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:22.940Z,1528879462.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:23.334Z,1528879463.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:23.742Z,1528879463.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:24.142Z,1528879464.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:24.540Z,1528879464.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:24.940Z,1528879464.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:25.345Z,1528879465.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:25.743Z,1528879465.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:26.141Z,1528879466.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:26.533Z,1528879466.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:26.924Z,1528879466.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:27.350Z,1528879467.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:27.749Z,1528879467.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:28.150Z,1528879468.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:28.522Z,1528879468.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:28.925Z,1528879468.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:29.355Z,1528879469.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:29.735Z,1528879469.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:30.135Z,1528879470.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:30.525Z,1528879470.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:30.926Z,1528879470.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:31.332Z,1528879471.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:31.731Z,1528879471.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:32.134Z,1528879472.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:32.535Z,1528879472.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:32.924Z,1528879472.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:33.328Z,1528879473.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:33.729Z,1528879473.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:34.124Z,1528879474.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:34.532Z,1528879474.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:34.935Z,1528879474.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:35.333Z,1528879475.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:35.727Z,1528879475.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:36.127Z,1528879476.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:36.527Z,1528879476.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:36.928Z,1528879476.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:37.331Z,1528879477.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:37.736Z,1528879477.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:38.138Z,1528879478.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:38.537Z,1528879478.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:38.925Z,1528879478.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:39.332Z,1528879479.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:39.725Z,1528879479.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:40.124Z,1528879480.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:40.544Z,1528879480.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:40.937Z,1528879480.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:41.334Z,1528879481.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:41.726Z,1528879481.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:42.131Z,1528879482.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:42.523Z,1528879482.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:42.936Z,1528879482.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:43.327Z,1528879483.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:43.736Z,1528879483.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:44.148Z,1528879484.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:44.538Z,1528879484.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:44.934Z,1528879484.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:45.334Z,1528879485.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:45.736Z,1528879485.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:46.132Z,1528879486.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:46.539Z,1528879486.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:46.943Z,1528879486.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:47.335Z,1528879487.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:47.738Z,1528879487.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:48.142Z,1528879488.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:48.516Z,1528879488.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:48.933Z,1528879488.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:49.316Z,1528879489.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:49.746Z,1528879489.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:50.143Z,1528879490.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:50.547Z,1528879490.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:50.916Z,1528879490.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:51.324Z,1528879491.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:51.750Z,1528879491.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:52.144Z,1528879492.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:52.549Z,1528879492.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:52.949Z,1528879492.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:53.350Z,1528879493.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:53.728Z,1528879493.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:54.123Z,1528879494.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:54.524Z,1528879494.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:54.928Z,1528879494.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:55.323Z,1528879495.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:55.755Z,1528879495.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:56.134Z,1528879496.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:56.535Z,1528879496.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:56.923Z,1528879496.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:57.324Z,1528879497.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:57.723Z,1528879497.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:58.124Z,1528879498.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:58.531Z,1528879498.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:58.934Z,1528879498.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:59.336Z,1528879499.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:44:59.728Z,1528879499.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:00.126Z,1528879500.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:00.525Z,1528879500.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:00.925Z,1528879500.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:01.327Z,1528879501.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:01.731Z,1528879501.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:02.155Z,1528879502.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:02.558Z,1528879502.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:02.925Z,1528879502.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:03.332Z,1528879503.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:03.727Z,1528879503.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:04.132Z,1528879504.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:04.531Z,1528879504.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:04.934Z,1528879504.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:05.335Z,1528879505.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:05.723Z,1528879505.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:06.132Z,1528879506.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:06.522Z,1528879506.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:06.927Z,1528879506.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:07.325Z,1528879507.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:07.731Z,1528879507.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:08.134Z,1528879508.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:08.557Z,1528879508.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:08.926Z,1528879508.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:09.325Z,1528879509.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:09.729Z,1528879509.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:10.125Z,1528879510.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:10.531Z,1528879510.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:10.935Z,1528879510.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:11.331Z,1528879511.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:11.726Z,1528879511.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:12.132Z,1528879512.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:12.526Z,1528879512.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:12.926Z,1528879512.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:13.327Z,1528879513.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:13.735Z,1528879513.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:14.134Z,1528879514.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:14.535Z,1528879514.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:14.923Z,1528879514.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:15.328Z,1528879515.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:15.749Z,1528879515.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:16.127Z,1528879516.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:16.531Z,1528879516.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:16.957Z,1528879516.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:17.328Z,1528879517.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:17.736Z,1528879517.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:18.128Z,1528879518.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:18.529Z,1528879518.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:18.927Z,1528879518.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:22.039Z,1528879522.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:22.042Z,1528879522.042 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T08:40:21.6Z
2018-06-13T08:45:22.042Z,1528879522.042 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T08:45:22.042Z,1528879522.042 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T08:45:22.236Z,1528879522.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:23.377Z,1528879523.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:23.544Z,1528879523.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:23.920Z,1528879523.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:24.319Z,1528879524.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:24.723Z,1528879524.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:25.120Z,1528879525.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:25.536Z,1528879525.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:28.633Z,1528879528.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:28.723Z,1528879528.723 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0124.lzma
2018-06-13T08:45:28.826Z,1528879528.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:29.175Z,1528879529.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:29.522Z,1528879529.522 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0124.lzma.bak
2018-06-13T08:45:29.522Z,1528879529.522 [DataOverHttps](INFO): SBD MOMSN=8328918
2018-06-13T08:45:29.585Z,1528879529.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:31.478Z,1528879531.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:31.631Z,1528879531.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:32.029Z,1528879532.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:35.143Z,1528879535.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:35.424Z,1528879535.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:35.721Z,1528879535.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:36.123Z,1528879536.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:36.520Z,1528879536.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:36.924Z,1528879536.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:40.028Z,1528879540.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:40.122Z,1528879540.122 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0125.lzma
2018-06-13T08:45:40.190Z,1528879540.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:40.586Z,1528879540.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:40.923Z,1528879540.923 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0125.lzma.bak
2018-06-13T08:45:40.923Z,1528879540.923 [DataOverHttps](INFO): SBD MOMSN=8328920
2018-06-13T08:45:41.031Z,1528879541.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:42.855Z,1528879542.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:42.874Z,1528879542.874 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T08:45:42.874Z,1528879542.874 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T08:45:42.875Z,1528879542.875 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T08:45:43.035Z,1528879543.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:43.439Z,1528879543.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:46.579Z,1528879546.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:46.743Z,1528879546.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:47.135Z,1528879547.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:47.536Z,1528879547.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:47.938Z,1528879547.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:48.333Z,1528879548.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:48.742Z,1528879548.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:49.140Z,1528879549.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:49.542Z,1528879549.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:49.940Z,1528879549.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:50.348Z,1528879550.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:50.752Z,1528879550.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:51.144Z,1528879551.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:51.664Z,1528879551.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:51.954Z,1528879551.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:52.442Z,1528879552.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:52.850Z,1528879552.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:53.158Z,1528879553.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:53.538Z,1528879553.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:53.954Z,1528879553.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:54.328Z,1528879554.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:54.731Z,1528879554.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:55.138Z,1528879555.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:55.540Z,1528879555.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:55.928Z,1528879555.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:56.328Z,1528879556.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:56.733Z,1528879556.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:57.127Z,1528879557.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:57.550Z,1528879557.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:57.934Z,1528879557.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:58.339Z,1528879558.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:58.744Z,1528879558.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:59.141Z,1528879559.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:59.532Z,1528879559.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:45:59.963Z,1528879559.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:00.361Z,1528879560.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:00.726Z,1528879560.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:01.129Z,1528879561.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:01.537Z,1528879561.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:01.928Z,1528879561.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:02.327Z,1528879562.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:02.739Z,1528879562.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:03.158Z,1528879563.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:03.558Z,1528879563.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:03.932Z,1528879563.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:04.338Z,1528879564.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:04.742Z,1528879564.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:05.128Z,1528879565.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:05.535Z,1528879565.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:05.942Z,1528879565.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:06.345Z,1528879566.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:06.733Z,1528879566.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:07.128Z,1528879567.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:07.542Z,1528879567.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:07.952Z,1528879567.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:08.338Z,1528879568.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:08.729Z,1528879568.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:09.129Z,1528879569.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:09.550Z,1528879569.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:09.942Z,1528879569.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:10.339Z,1528879570.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:10.731Z,1528879570.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:11.138Z,1528879571.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:11.539Z,1528879571.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:11.941Z,1528879571.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:12.336Z,1528879572.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:12.741Z,1528879572.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:13.125Z,1528879573.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:13.543Z,1528879573.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:13.940Z,1528879573.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:14.368Z,1528879574.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:14.727Z,1528879574.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:15.127Z,1528879575.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:15.538Z,1528879575.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:15.967Z,1528879575.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:16.334Z,1528879576.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:16.738Z,1528879576.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:17.128Z,1528879577.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:17.531Z,1528879577.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:17.936Z,1528879577.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:18.360Z,1528879578.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:18.739Z,1528879578.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:19.130Z,1528879579.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:19.539Z,1528879579.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:19.937Z,1528879579.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:20.342Z,1528879580.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:20.729Z,1528879580.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:21.130Z,1528879581.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:21.535Z,1528879581.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:21.939Z,1528879581.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:22.336Z,1528879582.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:22.735Z,1528879582.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:23.131Z,1528879583.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:23.536Z,1528879583.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:23.933Z,1528879583.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:24.340Z,1528879584.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:24.732Z,1528879584.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:25.146Z,1528879585.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:25.543Z,1528879585.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:25.935Z,1528879585.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:26.335Z,1528879586.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:26.747Z,1528879586.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:27.121Z,1528879587.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:27.527Z,1528879587.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:27.930Z,1528879587.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:28.327Z,1528879588.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:28.721Z,1528879588.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:29.122Z,1528879589.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:29.527Z,1528879589.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:29.931Z,1528879589.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:30.332Z,1528879590.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:30.722Z,1528879590.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:31.121Z,1528879591.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:31.531Z,1528879591.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:31.927Z,1528879591.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:32.327Z,1528879592.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:32.724Z,1528879592.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:33.120Z,1528879593.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:33.532Z,1528879593.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:33.936Z,1528879593.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:34.327Z,1528879594.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:34.724Z,1528879594.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:35.123Z,1528879595.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:35.532Z,1528879595.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:35.932Z,1528879595.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:36.332Z,1528879596.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:36.723Z,1528879596.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:37.123Z,1528879597.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:37.531Z,1528879597.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:37.932Z,1528879597.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:38.332Z,1528879598.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:38.724Z,1528879598.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:39.120Z,1528879599.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:39.523Z,1528879599.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:39.931Z,1528879599.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:40.332Z,1528879600.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:40.732Z,1528879600.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:41.123Z,1528879601.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:41.521Z,1528879601.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:41.923Z,1528879601.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:42.323Z,1528879602.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:42.732Z,1528879602.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:42.732Z,1528879602.732 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 107
2018-06-13T08:46:42.732Z,1528879602.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:46:42.734Z,1528879602.734 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:42.734Z,1528879602.734 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 107
2018-06-13T08:46:42.734Z,1528879602.734 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:46:42.736Z,1528879602.736 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:42.736Z,1528879602.736 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 107
2018-06-13T08:46:42.736Z,1528879602.736 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:46:42.837Z,1528879602.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:46:42.837Z,1528879602.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:46:42.838Z,1528879602.838 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:46:43.205Z,1528879603.205 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:46:43.205Z,1528879603.205 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 107
2018-06-13T08:46:43.206Z,1528879603.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:46:43.206Z,1528879603.206 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 107
2018-06-13T08:46:43.206Z,1528879603.206 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:46:43.206Z,1528879603.206 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 107
2018-06-13T08:46:43.532Z,1528879603.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:46:43.532Z,1528879603.532 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:46:43.532Z,1528879603.532 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:46:43.533Z,1528879603.533 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:46:43.533Z,1528879603.533 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:46:43.534Z,1528879603.534 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:46:43.534Z,1528879603.534 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:46:43.534Z,1528879603.534 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:46:43.535Z,1528879603.535 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:46:46.635Z,1528879606.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2018-06-13T08:46:46.636Z,1528879606.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:46.797Z,1528879606.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T08:46:46.798Z,1528879606.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:47.192Z,1528879607.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T08:46:47.194Z,1528879607.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:47.589Z,1528879607.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T08:46:47.590Z,1528879607.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:47.998Z,1528879607.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T08:46:47.000Z,1528879608.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:48.374Z,1528879608.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:46:48.375Z,1528879608.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:48.768Z,1528879608.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:46:48.770Z,1528879608.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:49.176Z,1528879609.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:46:49.178Z,1528879609.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:49.586Z,1528879609.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T08:46:49.587Z,1528879609.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:49.980Z,1528879609.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:46:49.982Z,1528879609.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:50.384Z,1528879610.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T08:46:50.386Z,1528879610.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:50.793Z,1528879610.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T08:46:50.794Z,1528879610.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:51.173Z,1528879611.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:46:51.174Z,1528879611.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:51.581Z,1528879611.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:46:51.582Z,1528879611.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:51.991Z,1528879611.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T08:46:51.992Z,1528879611.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:52.386Z,1528879612.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T08:46:52.387Z,1528879612.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:52.773Z,1528879612.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:46:52.774Z,1528879612.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:53.180Z,1528879613.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:46:53.181Z,1528879613.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:53.577Z,1528879613.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:46:53.578Z,1528879613.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:53.990Z,1528879613.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T08:46:53.991Z,1528879613.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:54.392Z,1528879614.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T08:46:54.393Z,1528879614.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:54.773Z,1528879614.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:46:54.774Z,1528879614.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:55.177Z,1528879615.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:46:55.178Z,1528879615.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:55.591Z,1528879615.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T08:46:55.592Z,1528879615.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:55.982Z,1528879615.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T08:46:55.983Z,1528879615.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:56.382Z,1528879616.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T08:46:56.383Z,1528879616.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:56.781Z,1528879616.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:46:56.782Z,1528879616.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:57.182Z,1528879617.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T08:46:57.184Z,1528879617.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:57.589Z,1528879617.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T08:46:57.590Z,1528879617.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:57.989Z,1528879617.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T08:46:57.990Z,1528879617.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:58.377Z,1528879618.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:46:58.378Z,1528879618.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:58.773Z,1528879618.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:46:58.774Z,1528879618.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:59.180Z,1528879619.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T08:46:59.181Z,1528879619.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:59.581Z,1528879619.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T08:46:59.582Z,1528879619.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:46:59.985Z,1528879619.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T08:46:59.986Z,1528879619.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:00.397Z,1528879620.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T08:47:00.398Z,1528879620.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:00.777Z,1528879620.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T08:47:00.778Z,1528879620.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:01.182Z,1528879621.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T08:47:01.183Z,1528879621.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:01.582Z,1528879621.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T08:47:01.583Z,1528879621.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:01.982Z,1528879621.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T08:47:01.982Z,1528879621.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:02.392Z,1528879622.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T08:47:02.397Z,1528879622.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:02.781Z,1528879622.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:03.189Z,1528879623.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:03.595Z,1528879623.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:03.992Z,1528879623.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:04.390Z,1528879624.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:04.786Z,1528879624.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:05.168Z,1528879625.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:05.591Z,1528879625.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:05.997Z,1528879625.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:06.401Z,1528879626.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:06.772Z,1528879626.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:07.167Z,1528879627.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:07.600Z,1528879627.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:07.982Z,1528879627.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:08.381Z,1528879628.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:08.775Z,1528879628.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:09.169Z,1528879629.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:09.580Z,1528879629.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:09.992Z,1528879629.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:10.388Z,1528879630.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:10.794Z,1528879630.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:11.170Z,1528879631.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:11.572Z,1528879631.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:11.973Z,1528879631.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:12.374Z,1528879632.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:12.782Z,1528879632.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:13.185Z,1528879633.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:13.581Z,1528879633.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:13.972Z,1528879633.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:14.376Z,1528879634.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:14.781Z,1528879634.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:15.177Z,1528879635.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:15.578Z,1528879635.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:15.985Z,1528879635.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:16.388Z,1528879636.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:16.788Z,1528879636.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:17.179Z,1528879637.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:17.584Z,1528879637.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:17.978Z,1528879637.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:18.380Z,1528879638.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:18.788Z,1528879638.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:19.184Z,1528879639.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:19.587Z,1528879639.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:19.982Z,1528879639.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:20.382Z,1528879640.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:20.780Z,1528879640.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:21.178Z,1528879641.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:21.578Z,1528879641.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:21.986Z,1528879641.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:22.386Z,1528879642.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:22.788Z,1528879642.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:23.180Z,1528879643.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:23.578Z,1528879643.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:23.982Z,1528879643.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:24.380Z,1528879644.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:24.785Z,1528879644.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:25.182Z,1528879645.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:25.592Z,1528879645.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:25.978Z,1528879645.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:26.378Z,1528879646.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:26.779Z,1528879646.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:27.177Z,1528879647.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:27.577Z,1528879647.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:27.986Z,1528879647.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:28.384Z,1528879648.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:28.788Z,1528879648.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:29.184Z,1528879649.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:29.578Z,1528879649.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:29.984Z,1528879649.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:30.379Z,1528879650.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:30.781Z,1528879650.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:31.184Z,1528879651.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:31.592Z,1528879651.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:31.984Z,1528879651.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:32.379Z,1528879652.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:32.780Z,1528879652.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:33.179Z,1528879653.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:33.581Z,1528879653.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:33.988Z,1528879653.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:34.386Z,1528879654.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:34.792Z,1528879654.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:35.178Z,1528879655.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:35.584Z,1528879655.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:35.966Z,1528879655.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:36.392Z,1528879656.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:36.801Z,1528879656.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:37.179Z,1528879657.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:37.604Z,1528879657.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:37.972Z,1528879657.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:38.374Z,1528879658.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:38.773Z,1528879658.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:39.172Z,1528879659.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:39.576Z,1528879659.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:39.980Z,1528879659.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:40.379Z,1528879660.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:40.776Z,1528879660.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:41.176Z,1528879661.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:41.568Z,1528879661.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:41.970Z,1528879661.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:42.377Z,1528879662.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:42.776Z,1528879662.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:43.184Z,1528879663.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:43.609Z,1528879663.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:46.706Z,1528879666.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:46.867Z,1528879666.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:47.266Z,1528879667.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:47.666Z,1528879667.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:48.064Z,1528879668.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:48.458Z,1528879668.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:48.841Z,1528879668.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:49.244Z,1528879669.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:49.682Z,1528879669.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:50.076Z,1528879670.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:50.475Z,1528879670.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:50.849Z,1528879670.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:51.247Z,1528879671.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:51.682Z,1528879671.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:52.076Z,1528879672.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:52.482Z,1528879672.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:52.858Z,1528879672.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:53.248Z,1528879673.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:53.656Z,1528879673.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:54.058Z,1528879674.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:54.459Z,1528879674.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:54.851Z,1528879674.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:55.251Z,1528879675.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:55.659Z,1528879675.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:56.059Z,1528879676.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:56.460Z,1528879676.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:56.860Z,1528879676.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:57.248Z,1528879677.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:57.660Z,1528879677.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:58.059Z,1528879678.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:58.461Z,1528879678.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:58.852Z,1528879678.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:59.263Z,1528879679.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:47:59.660Z,1528879679.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:00.058Z,1528879680.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:00.459Z,1528879680.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:00.848Z,1528879680.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:01.262Z,1528879681.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:01.656Z,1528879681.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:02.064Z,1528879682.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:02.464Z,1528879682.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:02.860Z,1528879682.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:03.251Z,1528879683.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:03.650Z,1528879683.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:04.060Z,1528879684.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:04.448Z,1528879684.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:04.864Z,1528879684.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:05.260Z,1528879685.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:05.660Z,1528879685.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:06.051Z,1528879686.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:06.452Z,1528879686.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:06.851Z,1528879686.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:07.251Z,1528879687.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:07.652Z,1528879687.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:08.064Z,1528879688.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:08.464Z,1528879688.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:08.860Z,1528879688.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:09.250Z,1528879689.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:09.650Z,1528879689.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:10.053Z,1528879690.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:10.448Z,1528879690.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:10.859Z,1528879690.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:11.265Z,1528879691.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:11.660Z,1528879691.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:12.052Z,1528879692.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:12.465Z,1528879692.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:12.856Z,1528879692.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:13.252Z,1528879693.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:13.664Z,1528879693.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:14.061Z,1528879694.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:14.471Z,1528879694.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:14.866Z,1528879694.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:15.248Z,1528879695.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:15.654Z,1528879695.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:16.060Z,1528879696.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:16.448Z,1528879696.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:16.860Z,1528879696.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:17.272Z,1528879697.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:17.659Z,1528879697.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:18.056Z,1528879698.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:18.457Z,1528879698.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:18.860Z,1528879698.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:19.253Z,1528879699.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:19.664Z,1528879699.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:20.064Z,1528879700.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:20.465Z,1528879700.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:20.866Z,1528879700.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:21.254Z,1528879701.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:21.663Z,1528879701.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:22.064Z,1528879702.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:22.460Z,1528879702.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:22.862Z,1528879702.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:23.267Z,1528879703.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:23.662Z,1528879703.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:24.057Z,1528879704.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:24.468Z,1528879704.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:24.856Z,1528879704.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:25.258Z,1528879705.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:25.653Z,1528879705.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:26.070Z,1528879706.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:26.467Z,1528879706.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:26.870Z,1528879706.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:27.245Z,1528879707.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:27.676Z,1528879707.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:28.050Z,1528879708.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:28.444Z,1528879708.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:28.876Z,1528879708.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:29.276Z,1528879709.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:29.659Z,1528879709.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:30.049Z,1528879710.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:30.450Z,1528879710.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:30.850Z,1528879710.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:31.250Z,1528879711.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:31.651Z,1528879711.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:32.055Z,1528879712.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:32.458Z,1528879712.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:32.859Z,1528879712.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:33.249Z,1528879713.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:33.656Z,1528879713.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:34.057Z,1528879714.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:34.447Z,1528879714.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:34.855Z,1528879714.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:35.259Z,1528879715.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:35.655Z,1528879715.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:36.056Z,1528879716.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:36.451Z,1528879716.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:36.850Z,1528879716.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:37.255Z,1528879717.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:37.656Z,1528879717.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:38.055Z,1528879718.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:38.458Z,1528879718.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:38.855Z,1528879718.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:39.247Z,1528879719.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:39.650Z,1528879719.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:40.059Z,1528879720.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:40.446Z,1528879720.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:40.856Z,1528879720.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:41.259Z,1528879721.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:41.656Z,1528879721.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:42.049Z,1528879722.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:42.451Z,1528879722.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:42.847Z,1528879722.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:43.250Z,1528879723.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:43.652Z,1528879723.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:44.055Z,1528879724.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:44.462Z,1528879724.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:44.863Z,1528879724.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:47.956Z,1528879727.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:48.117Z,1528879728.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:48.499Z,1528879728.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:48.895Z,1528879728.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:49.296Z,1528879729.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:49.688Z,1528879729.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:50.088Z,1528879730.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:50.487Z,1528879730.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:50.895Z,1528879730.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:51.296Z,1528879731.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:51.692Z,1528879731.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:52.088Z,1528879732.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:52.490Z,1528879732.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:52.887Z,1528879732.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:53.289Z,1528879733.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:53.684Z,1528879733.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:54.096Z,1528879734.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:54.500Z,1528879734.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:54.896Z,1528879734.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:55.287Z,1528879735.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:55.688Z,1528879735.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:56.083Z,1528879736.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:56.489Z,1528879736.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:56.895Z,1528879736.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:57.295Z,1528879737.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:57.696Z,1528879737.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:58.099Z,1528879738.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:58.484Z,1528879738.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:58.887Z,1528879738.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:59.289Z,1528879739.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:48:59.684Z,1528879739.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:00.093Z,1528879740.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:00.495Z,1528879740.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:00.896Z,1528879740.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:01.288Z,1528879741.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:01.688Z,1528879741.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:02.085Z,1528879742.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:02.488Z,1528879742.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:02.895Z,1528879742.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:03.293Z,1528879743.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:03.694Z,1528879743.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:04.085Z,1528879744.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:04.492Z,1528879744.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:04.887Z,1528879744.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:05.289Z,1528879745.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:05.685Z,1528879745.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:06.098Z,1528879746.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:06.504Z,1528879746.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:06.897Z,1528879746.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:07.300Z,1528879747.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:07.695Z,1528879747.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:08.087Z,1528879748.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:08.492Z,1528879748.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:08.901Z,1528879748.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:09.298Z,1528879749.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:09.699Z,1528879749.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:10.097Z,1528879750.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:10.485Z,1528879750.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:10.890Z,1528879750.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:11.296Z,1528879751.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:11.685Z,1528879751.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:12.104Z,1528879752.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:12.502Z,1528879752.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:12.894Z,1528879752.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:13.292Z,1528879753.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:13.687Z,1528879753.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:14.085Z,1528879754.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:14.492Z,1528879754.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:14.898Z,1528879754.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:15.297Z,1528879755.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:15.701Z,1528879755.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:16.095Z,1528879756.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:16.484Z,1528879756.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:16.892Z,1528879756.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:17.296Z,1528879757.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:17.699Z,1528879757.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:18.097Z,1528879758.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:18.497Z,1528879758.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:18.893Z,1528879758.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:19.292Z,1528879759.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:19.698Z,1528879759.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:20.100Z,1528879760.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:20.492Z,1528879760.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:20.898Z,1528879760.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:21.300Z,1528879761.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:21.697Z,1528879761.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:22.100Z,1528879762.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:22.500Z,1528879762.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:22.896Z,1528879762.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:23.277Z,1528879763.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:23.680Z,1528879763.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:24.106Z,1528879764.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:24.505Z,1528879764.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:24.905Z,1528879764.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:25.280Z,1528879765.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:25.680Z,1528879765.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:26.081Z,1528879766.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:26.496Z,1528879766.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:26.909Z,1528879766.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:27.305Z,1528879767.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:27.708Z,1528879767.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:28.088Z,1528879768.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:28.484Z,1528879768.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:28.883Z,1528879768.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:29.285Z,1528879769.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:29.684Z,1528879769.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:30.108Z,1528879770.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:30.510Z,1528879770.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:30.908Z,1528879770.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:31.284Z,1528879771.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:31.683Z,1528879771.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:32.085Z,1528879772.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:32.483Z,1528879772.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:32.909Z,1528879772.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:33.309Z,1528879773.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:33.708Z,1528879773.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:34.084Z,1528879774.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:34.484Z,1528879774.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:34.883Z,1528879774.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:35.284Z,1528879775.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:35.684Z,1528879775.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:36.108Z,1528879776.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:36.506Z,1528879776.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:36.908Z,1528879776.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:37.284Z,1528879777.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:37.685Z,1528879777.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:38.109Z,1528879778.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:38.483Z,1528879778.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:38.905Z,1528879778.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:39.308Z,1528879779.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:39.708Z,1528879779.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:40.084Z,1528879780.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:40.483Z,1528879780.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:40.885Z,1528879780.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:41.308Z,1528879781.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:41.684Z,1528879781.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:42.091Z,1528879782.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:42.495Z,1528879782.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:42.896Z,1528879782.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:43.288Z,1528879783.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:43.695Z,1528879783.695 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:43.695Z,1528879783.695 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 108
2018-06-13T08:49:43.695Z,1528879783.695 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:49:43.697Z,1528879783.697 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:43.697Z,1528879783.697 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 108
2018-06-13T08:49:43.697Z,1528879783.697 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:49:43.702Z,1528879783.702 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:43.702Z,1528879783.702 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 108
2018-06-13T08:49:43.702Z,1528879783.702 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:49:43.781Z,1528879783.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:49:43.781Z,1528879783.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:49:43.782Z,1528879783.782 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:49:46.914Z,1528879786.914 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:49:46.914Z,1528879786.914 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 108
2018-06-13T08:49:46.914Z,1528879786.914 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:49:46.914Z,1528879786.914 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 108
2018-06-13T08:49:46.915Z,1528879786.915 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:49:46.915Z,1528879786.915 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 108
2018-06-13T08:49:47.013Z,1528879787.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:49:47.014Z,1528879787.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:49:47.014Z,1528879787.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:49:47.015Z,1528879787.015 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:49:47.015Z,1528879787.015 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:49:47.015Z,1528879787.015 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:49:47.016Z,1528879787.016 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:49:47.016Z,1528879787.016 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:49:47.016Z,1528879787.016 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:49:47.389Z,1528879787.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T08:49:47.390Z,1528879787.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:47.785Z,1528879787.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T08:49:47.786Z,1528879787.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:48.184Z,1528879788.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T08:49:48.185Z,1528879788.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:48.585Z,1528879788.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T08:49:48.586Z,1528879788.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:48.974Z,1528879788.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T08:49:48.975Z,1528879788.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:49.389Z,1528879789.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T08:49:49.390Z,1528879789.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:49.765Z,1528879789.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T08:49:49.766Z,1528879789.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:50.191Z,1528879790.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T08:49:50.192Z,1528879790.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:50.591Z,1528879790.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T08:49:50.592Z,1528879790.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:50.993Z,1528879790.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T08:49:50.994Z,1528879790.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:51.370Z,1528879791.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T08:49:51.370Z,1528879791.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:51.768Z,1528879791.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T08:49:51.769Z,1528879791.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:52.176Z,1528879792.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T08:49:52.197Z,1528879792.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:52.568Z,1528879792.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T08:49:52.569Z,1528879792.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:52.976Z,1528879792.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T08:49:52.977Z,1528879792.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:53.380Z,1528879793.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T08:49:53.397Z,1528879793.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:53.776Z,1528879793.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T08:49:53.778Z,1528879793.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:54.171Z,1528879794.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T08:49:54.172Z,1528879794.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:54.575Z,1528879794.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T08:49:54.576Z,1528879794.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:54.967Z,1528879794.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T08:49:54.968Z,1528879794.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:55.386Z,1528879795.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T08:49:55.387Z,1528879795.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:55.776Z,1528879795.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T08:49:55.778Z,1528879795.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:56.180Z,1528879796.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T08:49:56.181Z,1528879796.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:56.580Z,1528879796.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T08:49:56.581Z,1528879796.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:56.980Z,1528879796.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T08:49:56.981Z,1528879796.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:57.370Z,1528879797.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T08:49:57.371Z,1528879797.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:57.776Z,1528879797.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T08:49:57.777Z,1528879797.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:58.177Z,1528879798.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T08:49:58.178Z,1528879798.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:58.568Z,1528879798.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T08:49:58.570Z,1528879798.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:58.981Z,1528879798.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T08:49:58.982Z,1528879798.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:59.386Z,1528879799.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T08:49:59.387Z,1528879799.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:49:59.782Z,1528879799.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T08:49:59.783Z,1528879799.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:00.171Z,1528879800.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T08:50:00.172Z,1528879800.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:00.575Z,1528879800.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T08:50:00.576Z,1528879800.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:00.968Z,1528879800.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T08:50:00.969Z,1528879800.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:01.374Z,1528879801.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T08:50:01.375Z,1528879801.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:01.785Z,1528879801.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T08:50:01.786Z,1528879801.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:02.181Z,1528879802.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T08:50:02.182Z,1528879802.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:02.592Z,1528879802.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T08:50:02.593Z,1528879802.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:02.985Z,1528879802.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T08:50:02.986Z,1528879802.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:03.377Z,1528879803.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T08:50:03.378Z,1528879803.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:03.772Z,1528879803.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:04.176Z,1528879804.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:04.579Z,1528879804.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:04.982Z,1528879804.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:05.385Z,1528879805.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:05.779Z,1528879805.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:06.178Z,1528879806.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:06.580Z,1528879806.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:06.976Z,1528879806.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:07.383Z,1528879807.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:07.785Z,1528879807.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:08.183Z,1528879808.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:08.584Z,1528879808.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:08.996Z,1528879808.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:09.360Z,1528879809.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:09.768Z,1528879809.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:10.166Z,1528879810.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:10.563Z,1528879810.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:10.999Z,1528879810.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:11.403Z,1528879811.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:11.775Z,1528879811.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:12.170Z,1528879812.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:12.571Z,1528879812.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:12.968Z,1528879812.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:13.369Z,1528879813.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:13.770Z,1528879813.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:14.172Z,1528879814.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:14.574Z,1528879814.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:14.979Z,1528879814.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:15.369Z,1528879815.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:15.769Z,1528879815.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:16.180Z,1528879816.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:16.567Z,1528879816.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:16.975Z,1528879816.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:17.379Z,1528879817.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:17.776Z,1528879817.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:18.169Z,1528879818.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:18.571Z,1528879818.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:18.967Z,1528879818.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:19.370Z,1528879819.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:19.771Z,1528879819.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:20.176Z,1528879820.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:20.579Z,1528879820.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:20.980Z,1528879820.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:21.370Z,1528879821.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:21.770Z,1528879821.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:22.182Z,1528879822.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:22.568Z,1528879822.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:22.980Z,1528879822.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:23.379Z,1528879823.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:23.780Z,1528879823.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:24.176Z,1528879824.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:24.571Z,1528879824.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:24.968Z,1528879824.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:25.372Z,1528879825.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:25.772Z,1528879825.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:26.177Z,1528879826.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:26.583Z,1528879826.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:26.979Z,1528879826.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:27.369Z,1528879827.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:27.771Z,1528879827.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:28.180Z,1528879828.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:28.583Z,1528879828.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:28.979Z,1528879828.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:29.383Z,1528879829.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:29.778Z,1528879829.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:30.172Z,1528879830.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:30.576Z,1528879830.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:30.970Z,1528879830.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:31.374Z,1528879831.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:31.776Z,1528879831.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:32.181Z,1528879832.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:32.584Z,1528879832.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:32.982Z,1528879832.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:33.378Z,1528879833.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:33.773Z,1528879833.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:34.174Z,1528879834.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:34.579Z,1528879834.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:34.989Z,1528879834.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:35.389Z,1528879835.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:35.777Z,1528879835.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:36.171Z,1528879836.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:36.584Z,1528879836.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:36.979Z,1528879836.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:37.374Z,1528879837.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:37.775Z,1528879837.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:38.187Z,1528879838.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:38.585Z,1528879838.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:38.988Z,1528879838.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:39.378Z,1528879839.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:39.772Z,1528879839.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:40.184Z,1528879840.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:40.577Z,1528879840.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:40.981Z,1528879840.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:41.393Z,1528879841.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:41.786Z,1528879841.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:42.189Z,1528879842.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:42.565Z,1528879842.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:42.964Z,1528879842.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:43.369Z,1528879843.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:43.372Z,1528879843.372 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T08:50:43.372Z,1528879843.372 [Default:CheckIn:C.Wait] Stopped
2018-06-13T08:50:43.372Z,1528879843.372 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T08:50:43.372Z,1528879843.372 [Default:CheckIn:D] Running Loop=1
2018-06-13T08:50:43.768Z,1528879843.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:43.771Z,1528879843.771 [Default:CheckIn:D] Stopped
2018-06-13T08:50:43.771Z,1528879843.771 [Default:CheckIn:E] Running Loop=1
2018-06-13T08:50:44.191Z,1528879844.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:44.198Z,1528879844.198 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 323.505436 min 
2018-06-13T08:50:44.199Z,1528879844.199 [Default:CheckIn:E] Stopped
2018-06-13T08:50:44.199Z,1528879844.199 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T08:50:44.199Z,1528879844.199 [Default:CheckIn] Stopped
2018-06-13T08:50:44.199Z,1528879844.199 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T08:50:44.199Z,1528879844.199 [Default:CheckIn](INFO): Running loop #32
2018-06-13T08:50:44.199Z,1528879844.199 [Default:CheckIn] Running Loop=32
2018-06-13T08:50:44.199Z,1528879844.199 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T08:50:44.199Z,1528879844.199 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T08:50:44.604Z,1528879844.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:44.000Z,1528879845.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:48.084Z,1528879848.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:48.264Z,1528879848.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:48.666Z,1528879848.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:49.065Z,1528879849.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:49.464Z,1528879849.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:49.856Z,1528879849.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:50.266Z,1528879850.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:50.644Z,1528879850.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:51.076Z,1528879851.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:51.469Z,1528879851.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:51.870Z,1528879851.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:52.245Z,1528879852.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:52.644Z,1528879852.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:53.048Z,1528879853.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:53.444Z,1528879853.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:53.848Z,1528879853.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:54.271Z,1528879854.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:54.675Z,1528879854.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:55.060Z,1528879855.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:55.450Z,1528879855.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:55.859Z,1528879855.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:56.248Z,1528879856.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:56.650Z,1528879856.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:57.060Z,1528879857.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:57.455Z,1528879857.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:57.855Z,1528879857.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:58.248Z,1528879858.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:58.652Z,1528879858.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:59.050Z,1528879859.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:59.452Z,1528879859.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:50:59.846Z,1528879859.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:00.255Z,1528879860.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:00.659Z,1528879860.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:01.051Z,1528879861.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:01.450Z,1528879861.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:01.852Z,1528879861.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:02.251Z,1528879862.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:02.650Z,1528879862.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:03.059Z,1528879863.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:03.459Z,1528879863.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:03.855Z,1528879863.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:04.262Z,1528879864.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:04.648Z,1528879864.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:05.049Z,1528879865.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:05.453Z,1528879865.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:05.846Z,1528879865.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:06.260Z,1528879866.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:06.660Z,1528879866.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:07.055Z,1528879867.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:07.447Z,1528879867.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:07.856Z,1528879867.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:08.248Z,1528879868.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:08.646Z,1528879868.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:09.059Z,1528879869.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:09.460Z,1528879869.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:09.860Z,1528879869.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:10.256Z,1528879870.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:10.655Z,1528879870.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:11.051Z,1528879871.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:11.460Z,1528879871.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:11.852Z,1528879871.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:12.261Z,1528879872.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:12.668Z,1528879872.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:13.057Z,1528879873.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:13.460Z,1528879873.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:13.853Z,1528879873.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:14.253Z,1528879874.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:14.652Z,1528879874.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:15.063Z,1528879875.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:15.468Z,1528879875.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:15.868Z,1528879875.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:16.254Z,1528879876.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:16.653Z,1528879876.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:17.060Z,1528879877.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:17.457Z,1528879877.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:17.850Z,1528879877.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:18.263Z,1528879878.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:18.662Z,1528879878.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:19.062Z,1528879879.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:19.453Z,1528879879.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:19.855Z,1528879879.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:20.260Z,1528879880.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:20.653Z,1528879880.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:21.066Z,1528879881.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:21.462Z,1528879881.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:21.862Z,1528879881.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:22.255Z,1528879882.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:22.655Z,1528879882.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:23.054Z,1528879883.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:23.460Z,1528879883.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:23.852Z,1528879883.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:24.262Z,1528879884.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:24.665Z,1528879884.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:25.058Z,1528879885.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:25.452Z,1528879885.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:25.860Z,1528879885.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:26.254Z,1528879886.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:26.652Z,1528879886.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:27.066Z,1528879887.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:27.460Z,1528879887.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:27.872Z,1528879887.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:28.260Z,1528879888.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:28.654Z,1528879888.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:29.052Z,1528879889.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:29.455Z,1528879889.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:29.858Z,1528879889.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:30.261Z,1528879890.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:30.665Z,1528879890.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:31.057Z,1528879891.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:31.452Z,1528879891.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:31.855Z,1528879891.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:32.317Z,1528879892.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:32.652Z,1528879892.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:33.065Z,1528879893.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:33.461Z,1528879893.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:33.862Z,1528879893.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:34.255Z,1528879894.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:34.654Z,1528879894.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:35.052Z,1528879895.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:35.455Z,1528879895.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:35.852Z,1528879895.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:36.261Z,1528879896.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:36.672Z,1528879896.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:37.061Z,1528879897.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:37.452Z,1528879897.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:37.854Z,1528879897.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:38.253Z,1528879898.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:38.652Z,1528879898.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:39.066Z,1528879899.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:39.468Z,1528879899.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:39.861Z,1528879899.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:40.254Z,1528879900.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:40.659Z,1528879900.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:41.052Z,1528879901.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:41.455Z,1528879901.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:41.859Z,1528879901.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:42.261Z,1528879902.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:42.662Z,1528879902.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:43.061Z,1528879903.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:43.452Z,1528879903.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:43.854Z,1528879903.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:46.961Z,1528879906.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:47.120Z,1528879907.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:47.515Z,1528879907.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:47.913Z,1528879907.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:48.312Z,1528879908.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:48.703Z,1528879908.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:49.102Z,1528879909.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:49.502Z,1528879909.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:49.903Z,1528879909.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:50.312Z,1528879910.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:50.712Z,1528879910.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:51.110Z,1528879911.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:51.502Z,1528879911.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:51.902Z,1528879911.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:52.310Z,1528879912.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:52.702Z,1528879912.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:53.112Z,1528879913.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:53.520Z,1528879913.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:53.912Z,1528879913.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:54.300Z,1528879914.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:54.709Z,1528879914.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:55.106Z,1528879915.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:55.505Z,1528879915.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:55.888Z,1528879915.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:56.307Z,1528879916.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:56.708Z,1528879916.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:57.120Z,1528879917.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:57.485Z,1528879917.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:57.911Z,1528879917.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:58.306Z,1528879918.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:58.712Z,1528879918.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:59.120Z,1528879919.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:59.519Z,1528879919.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:51:59.919Z,1528879919.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:00.292Z,1528879920.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:00.689Z,1528879920.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:01.088Z,1528879921.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:01.493Z,1528879921.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:01.921Z,1528879921.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:02.323Z,1528879922.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:02.725Z,1528879922.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:03.103Z,1528879923.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:03.494Z,1528879923.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:03.901Z,1528879923.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:04.302Z,1528879924.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:04.696Z,1528879924.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:05.104Z,1528879925.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:05.503Z,1528879925.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:05.900Z,1528879925.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:06.291Z,1528879926.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:06.696Z,1528879926.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:07.094Z,1528879927.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:07.490Z,1528879927.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:07.895Z,1528879927.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:08.299Z,1528879928.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:08.708Z,1528879928.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:09.103Z,1528879929.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:09.498Z,1528879929.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:09.894Z,1528879929.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:10.305Z,1528879930.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:10.692Z,1528879930.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:11.103Z,1528879931.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:11.515Z,1528879931.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:11.904Z,1528879931.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:12.297Z,1528879932.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:12.699Z,1528879932.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:13.102Z,1528879933.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:13.508Z,1528879933.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:13.909Z,1528879933.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:14.300Z,1528879934.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:14.696Z,1528879934.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:15.104Z,1528879935.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:15.501Z,1528879935.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:15.896Z,1528879935.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:16.310Z,1528879936.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:16.709Z,1528879936.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:17.104Z,1528879937.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:17.506Z,1528879937.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:17.896Z,1528879937.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:18.310Z,1528879938.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:18.688Z,1528879938.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:19.115Z,1528879939.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:19.511Z,1528879939.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:19.913Z,1528879939.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:20.290Z,1528879940.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:20.691Z,1528879940.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:21.109Z,1528879941.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:21.515Z,1528879941.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:21.918Z,1528879941.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:22.293Z,1528879942.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:22.691Z,1528879942.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:23.119Z,1528879943.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:23.503Z,1528879943.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:23.899Z,1528879943.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:24.293Z,1528879944.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:24.694Z,1528879944.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:25.096Z,1528879945.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:25.502Z,1528879945.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:25.903Z,1528879945.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:26.294Z,1528879946.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:26.693Z,1528879946.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:27.104Z,1528879947.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:27.499Z,1528879947.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:27.903Z,1528879947.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:28.306Z,1528879948.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:28.694Z,1528879948.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:29.104Z,1528879949.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:29.503Z,1528879949.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:29.904Z,1528879949.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:30.296Z,1528879950.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:30.709Z,1528879950.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:31.108Z,1528879951.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:31.504Z,1528879951.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:31.905Z,1528879951.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:32.294Z,1528879952.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:32.700Z,1528879952.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:33.105Z,1528879953.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:33.512Z,1528879953.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:33.904Z,1528879953.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:34.300Z,1528879954.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:34.694Z,1528879954.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:35.108Z,1528879955.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:35.512Z,1528879955.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:35.904Z,1528879955.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:36.298Z,1528879956.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:36.708Z,1528879956.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:37.111Z,1528879957.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:37.510Z,1528879957.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:37.911Z,1528879957.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:38.304Z,1528879958.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:38.703Z,1528879958.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:39.125Z,1528879959.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:39.512Z,1528879959.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:39.915Z,1528879959.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:40.290Z,1528879960.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:40.688Z,1528879960.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:41.119Z,1528879961.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:41.520Z,1528879961.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:41.919Z,1528879961.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:42.294Z,1528879962.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:42.692Z,1528879962.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:43.120Z,1528879963.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:43.522Z,1528879963.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:43.923Z,1528879963.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:47.025Z,1528879967.025 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:47.025Z,1528879967.025 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 109
2018-06-13T08:52:47.025Z,1528879967.025 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:52:47.027Z,1528879967.027 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:47.027Z,1528879967.027 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 109
2018-06-13T08:52:47.027Z,1528879967.027 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:52:47.029Z,1528879967.029 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:47.029Z,1528879967.029 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 109
2018-06-13T08:52:47.029Z,1528879967.029 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:52:47.105Z,1528879967.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:52:47.105Z,1528879967.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:52:47.106Z,1528879967.106 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:52:47.261Z,1528879967.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:52:47.261Z,1528879967.261 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 109
2018-06-13T08:52:47.261Z,1528879967.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:52:47.261Z,1528879967.261 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 109
2018-06-13T08:52:47.262Z,1528879967.262 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:52:47.262Z,1528879967.262 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 109
2018-06-13T08:52:47.577Z,1528879967.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:52:47.578Z,1528879967.578 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:52:47.578Z,1528879967.578 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:52:47.578Z,1528879967.578 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:52:47.579Z,1528879967.579 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:52:47.579Z,1528879967.579 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:52:47.579Z,1528879967.579 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:52:47.580Z,1528879967.580 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:52:47.580Z,1528879967.580 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:52:47.981Z,1528879967.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T08:52:47.982Z,1528879967.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:48.382Z,1528879968.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T08:52:48.383Z,1528879968.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:48.756Z,1528879968.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T08:52:48.757Z,1528879968.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:49.156Z,1528879969.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T08:52:49.157Z,1528879969.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:49.565Z,1528879969.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T08:52:49.566Z,1528879969.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:49.959Z,1528879969.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T08:52:49.960Z,1528879969.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:50.371Z,1528879970.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T08:52:50.372Z,1528879970.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:50.767Z,1528879970.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T08:52:50.768Z,1528879970.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:51.167Z,1528879971.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T08:52:51.168Z,1528879971.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:51.555Z,1528879971.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T08:52:51.556Z,1528879971.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:51.959Z,1528879971.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T08:52:51.960Z,1528879971.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:52.362Z,1528879972.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T08:52:52.363Z,1528879972.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:52.758Z,1528879972.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T08:52:52.759Z,1528879972.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:53.168Z,1528879973.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T08:52:53.170Z,1528879973.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:53.567Z,1528879973.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T08:52:53.568Z,1528879973.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:53.963Z,1528879973.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T08:52:53.964Z,1528879973.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:54.359Z,1528879974.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T08:52:54.360Z,1528879974.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:54.770Z,1528879974.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T08:52:54.771Z,1528879974.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:55.168Z,1528879975.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T08:52:55.169Z,1528879975.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:55.566Z,1528879975.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T08:52:55.567Z,1528879975.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:55.967Z,1528879975.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T08:52:55.968Z,1528879975.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:56.356Z,1528879976.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T08:52:56.357Z,1528879976.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:56.759Z,1528879976.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T08:52:56.760Z,1528879976.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:57.119Z,1528879977.119 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T08:52:57.119Z,1528879977.119 [NAL9602] Data Fault, FailCount= 5
2018-06-13T08:52:57.119Z,1528879977.119 [NAL9602](ERROR): Data Fault
2018-06-13T08:52:57.180Z,1528879977.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T08:52:57.185Z,1528879977.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:57.265Z,1528879977.265 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T08:52:57.265Z,1528879977.265 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T08:52:57.514Z,1528879977.514 [NAL9602](INFO): Powering down
2018-06-13T08:52:57.560Z,1528879977.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T08:52:57.561Z,1528879977.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:57.639Z,1528879977.639 [CBIT](INFO): Critical error at 20180613T085257
2018-06-13T08:52:57.957Z,1528879977.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T08:52:57.958Z,1528879977.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:58.361Z,1528879978.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T08:52:58.362Z,1528879978.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:58.754Z,1528879978.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T08:52:58.754Z,1528879978.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:59.157Z,1528879979.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T08:52:59.158Z,1528879979.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:59.557Z,1528879979.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T08:52:59.558Z,1528879979.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:52:59.954Z,1528879979.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T08:52:59.955Z,1528879979.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:00.356Z,1528879980.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T08:53:00.357Z,1528879980.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:00.757Z,1528879980.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T08:53:00.758Z,1528879980.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:01.156Z,1528879981.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T08:53:01.158Z,1528879981.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:01.563Z,1528879981.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T08:53:01.564Z,1528879981.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:01.958Z,1528879981.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T08:53:01.959Z,1528879981.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:02.353Z,1528879982.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T08:53:02.354Z,1528879982.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:02.756Z,1528879982.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T08:53:02.757Z,1528879982.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:03.158Z,1528879983.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T08:53:03.159Z,1528879983.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:03.553Z,1528879983.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T08:53:03.554Z,1528879983.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:03.957Z,1528879983.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T08:53:03.958Z,1528879983.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:04.357Z,1528879984.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T08:53:04.358Z,1528879984.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:04.754Z,1528879984.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T08:53:04.755Z,1528879984.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:05.156Z,1528879985.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T08:53:05.157Z,1528879985.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:05.557Z,1528879985.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T08:53:05.558Z,1528879985.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:05.953Z,1528879985.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T08:53:05.954Z,1528879985.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:06.356Z,1528879986.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T08:53:06.357Z,1528879986.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:06.759Z,1528879986.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T08:53:06.760Z,1528879986.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:07.155Z,1528879987.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:07.556Z,1528879987.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:07.964Z,1528879987.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:08.357Z,1528879988.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:08.753Z,1528879988.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:09.155Z,1528879989.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:09.554Z,1528879989.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:09.956Z,1528879989.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:10.357Z,1528879990.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:10.758Z,1528879990.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:11.157Z,1528879991.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:11.559Z,1528879991.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:11.954Z,1528879991.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:12.356Z,1528879992.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:12.758Z,1528879992.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:13.156Z,1528879993.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:13.557Z,1528879993.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:13.958Z,1528879993.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:14.354Z,1528879994.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:14.756Z,1528879994.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:15.157Z,1528879995.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:15.554Z,1528879995.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:15.956Z,1528879995.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:16.359Z,1528879996.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:16.757Z,1528879996.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:17.160Z,1528879997.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:17.558Z,1528879997.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:17.954Z,1528879997.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:18.358Z,1528879998.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:18.766Z,1528879998.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:19.154Z,1528879999.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:19.557Z,1528879999.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:19.959Z,1528879999.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:20.358Z,1528880000.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:20.767Z,1528880000.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:21.156Z,1528880001.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:21.554Z,1528880001.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:21.958Z,1528880001.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:22.354Z,1528880002.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:22.758Z,1528880002.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:23.162Z,1528880003.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:23.554Z,1528880003.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:23.957Z,1528880003.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:24.358Z,1528880004.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:24.753Z,1528880004.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:25.155Z,1528880005.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:25.557Z,1528880005.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:25.954Z,1528880005.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:26.358Z,1528880006.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:26.758Z,1528880006.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:27.154Z,1528880007.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:27.558Z,1528880007.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:27.971Z,1528880007.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:28.360Z,1528880008.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:28.754Z,1528880008.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:29.157Z,1528880009.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:29.557Z,1528880009.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:29.954Z,1528880009.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:30.357Z,1528880010.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:30.754Z,1528880010.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:31.153Z,1528880011.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:31.556Z,1528880011.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:31.954Z,1528880011.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:32.357Z,1528880012.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:32.758Z,1528880012.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:33.153Z,1528880013.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:33.553Z,1528880013.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:33.956Z,1528880013.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:34.353Z,1528880014.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:34.756Z,1528880014.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:35.156Z,1528880015.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:35.560Z,1528880015.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:35.953Z,1528880015.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:36.356Z,1528880016.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:36.753Z,1528880016.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:37.156Z,1528880017.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:37.560Z,1528880017.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:37.953Z,1528880017.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:38.356Z,1528880018.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:38.756Z,1528880018.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:39.153Z,1528880019.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:39.558Z,1528880019.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:39.964Z,1528880019.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:40.360Z,1528880020.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:40.757Z,1528880020.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:41.156Z,1528880021.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:41.556Z,1528880021.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:41.964Z,1528880021.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:42.358Z,1528880022.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:42.753Z,1528880022.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:43.157Z,1528880023.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:43.560Z,1528880023.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:43.957Z,1528880023.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:47.073Z,1528880027.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:47.251Z,1528880027.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:47.625Z,1528880027.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:48.022Z,1528880028.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:48.419Z,1528880028.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:48.814Z,1528880028.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:49.219Z,1528880029.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:49.624Z,1528880029.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:50.014Z,1528880030.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:50.419Z,1528880030.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:50.824Z,1528880030.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:51.214Z,1528880031.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:51.618Z,1528880031.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:52.018Z,1528880032.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:52.414Z,1528880032.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:52.818Z,1528880032.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:53.224Z,1528880033.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:53.614Z,1528880033.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:54.019Z,1528880034.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:54.418Z,1528880034.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:54.814Z,1528880034.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:55.224Z,1528880035.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:55.618Z,1528880035.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:56.014Z,1528880036.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:56.418Z,1528880036.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:56.824Z,1528880036.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:57.219Z,1528880037.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:57.618Z,1528880037.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:58.019Z,1528880038.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:58.416Z,1528880038.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:58.818Z,1528880038.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:59.218Z,1528880039.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:53:59.616Z,1528880039.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:00.019Z,1528880040.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:00.418Z,1528880040.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:00.817Z,1528880040.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:01.219Z,1528880041.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:01.619Z,1528880041.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:02.018Z,1528880042.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:02.419Z,1528880042.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:02.819Z,1528880042.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:03.232Z,1528880043.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:03.619Z,1528880043.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:04.019Z,1528880044.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:04.423Z,1528880044.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:04.820Z,1528880044.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:05.219Z,1528880045.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:05.619Z,1528880045.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:06.017Z,1528880046.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:06.424Z,1528880046.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:06.819Z,1528880046.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:07.218Z,1528880047.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:07.620Z,1528880047.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:08.019Z,1528880048.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:08.419Z,1528880048.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:08.820Z,1528880048.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:09.224Z,1528880049.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:09.619Z,1528880049.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:10.019Z,1528880050.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:10.418Z,1528880050.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:10.817Z,1528880050.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:11.219Z,1528880051.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:11.619Z,1528880051.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:12.017Z,1528880052.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:12.419Z,1528880052.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:12.818Z,1528880052.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:13.219Z,1528880053.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:13.624Z,1528880053.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:14.019Z,1528880054.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:14.418Z,1528880054.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:14.819Z,1528880054.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:15.220Z,1528880055.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:15.617Z,1528880055.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:16.022Z,1528880056.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:16.420Z,1528880056.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:16.817Z,1528880056.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:17.222Z,1528880057.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:17.620Z,1528880057.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:18.017Z,1528880058.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:18.423Z,1528880058.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:18.820Z,1528880058.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:19.220Z,1528880059.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:19.621Z,1528880059.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:20.020Z,1528880060.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:20.421Z,1528880060.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:20.828Z,1528880060.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:21.223Z,1528880061.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:21.617Z,1528880061.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:22.022Z,1528880062.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:22.420Z,1528880062.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:22.817Z,1528880062.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:23.223Z,1528880063.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:23.620Z,1528880063.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:24.017Z,1528880064.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:24.422Z,1528880064.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:24.820Z,1528880064.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:25.221Z,1528880065.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:25.622Z,1528880065.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:26.030Z,1528880066.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:26.417Z,1528880066.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:26.822Z,1528880066.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:27.220Z,1528880067.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:27.617Z,1528880067.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:28.028Z,1528880068.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:28.421Z,1528880068.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:28.818Z,1528880068.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:29.224Z,1528880069.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:29.621Z,1528880069.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:30.019Z,1528880070.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:30.428Z,1528880070.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:30.821Z,1528880070.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:31.221Z,1528880071.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:31.623Z,1528880071.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:32.021Z,1528880072.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:32.421Z,1528880072.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:32.826Z,1528880072.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:33.225Z,1528880073.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:33.618Z,1528880073.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:34.028Z,1528880074.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:34.421Z,1528880074.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:34.818Z,1528880074.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:35.220Z,1528880075.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:35.621Z,1528880075.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:36.017Z,1528880076.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:36.423Z,1528880076.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:36.821Z,1528880076.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:37.221Z,1528880077.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:37.625Z,1528880077.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:38.021Z,1528880078.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:38.421Z,1528880078.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:38.823Z,1528880078.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:39.226Z,1528880079.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:39.622Z,1528880079.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:40.023Z,1528880080.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:40.422Z,1528880080.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:40.819Z,1528880080.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:41.228Z,1528880081.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:41.622Z,1528880081.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:42.018Z,1528880082.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:42.426Z,1528880082.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:42.825Z,1528880082.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:43.223Z,1528880083.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:43.626Z,1528880083.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:44.026Z,1528880084.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:47.131Z,1528880087.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:47.287Z,1528880087.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:47.684Z,1528880087.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:48.084Z,1528880088.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:48.483Z,1528880088.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:48.888Z,1528880088.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:49.282Z,1528880089.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:49.683Z,1528880089.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:50.088Z,1528880090.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:50.484Z,1528880090.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:50.883Z,1528880090.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:51.283Z,1528880091.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:51.681Z,1528880091.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:52.083Z,1528880092.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:52.491Z,1528880092.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:52.880Z,1528880092.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:53.282Z,1528880093.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:53.704Z,1528880093.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:54.081Z,1528880094.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:54.482Z,1528880094.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:54.883Z,1528880094.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:55.281Z,1528880095.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:55.682Z,1528880095.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:56.082Z,1528880096.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:56.483Z,1528880096.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:56.890Z,1528880096.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:57.304Z,1528880097.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:57.385Z,1528880097.385 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T08:54:57.385Z,1528880097.385 [NAL9602] No Fault, FailCount= 5
2018-06-13T08:54:57.642Z,1528880097.642 [NAL9602](INFO): Powering up NAL9602
2018-06-13T08:54:57.687Z,1528880097.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:58.082Z,1528880098.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:58.484Z,1528880098.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:58.882Z,1528880098.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:59.284Z,1528880099.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:54:59.684Z,1528880099.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:00.080Z,1528880100.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:00.482Z,1528880100.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:00.883Z,1528880100.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:01.282Z,1528880101.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:01.682Z,1528880101.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:02.084Z,1528880102.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:02.483Z,1528880102.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:02.882Z,1528880102.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:03.283Z,1528880103.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:03.681Z,1528880103.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:04.083Z,1528880104.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:04.483Z,1528880104.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:04.882Z,1528880104.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:05.282Z,1528880105.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:05.683Z,1528880105.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:06.081Z,1528880106.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:06.491Z,1528880106.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:06.884Z,1528880106.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:07.281Z,1528880107.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:07.682Z,1528880107.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:08.112Z,1528880108.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:08.450Z,1528880108.450 [NAL9602](INFO): NAL9602 initialized
2018-06-13T08:55:08.484Z,1528880108.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:08.886Z,1528880108.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:09.295Z,1528880109.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:09.690Z,1528880109.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:10.096Z,1528880110.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:10.485Z,1528880110.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:10.883Z,1528880110.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:11.286Z,1528880111.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:11.695Z,1528880111.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:12.090Z,1528880112.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:12.517Z,1528880112.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:12.886Z,1528880112.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:13.285Z,1528880113.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:13.687Z,1528880113.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:14.084Z,1528880114.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:14.488Z,1528880114.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:14.916Z,1528880114.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:15.295Z,1528880115.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:15.682Z,1528880115.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:16.085Z,1528880116.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:16.487Z,1528880116.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:16.886Z,1528880116.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:17.286Z,1528880117.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:17.695Z,1528880117.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:18.090Z,1528880118.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:18.495Z,1528880118.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:18.885Z,1528880118.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:19.282Z,1528880119.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:19.686Z,1528880119.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:20.085Z,1528880120.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:20.496Z,1528880120.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:20.916Z,1528880120.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:21.315Z,1528880121.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:21.682Z,1528880121.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:22.086Z,1528880122.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:22.486Z,1528880122.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:22.883Z,1528880122.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:23.286Z,1528880123.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:23.695Z,1528880123.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:24.091Z,1528880124.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:24.494Z,1528880124.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:24.886Z,1528880124.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:25.283Z,1528880125.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:25.697Z,1528880125.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:26.086Z,1528880126.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:26.492Z,1528880126.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:26.900Z,1528880126.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:27.295Z,1528880127.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:27.687Z,1528880127.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:28.090Z,1528880128.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:28.487Z,1528880128.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:28.888Z,1528880128.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:29.296Z,1528880129.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:29.692Z,1528880129.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:30.096Z,1528880130.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:30.500Z,1528880130.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:30.887Z,1528880130.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:31.287Z,1528880131.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:31.689Z,1528880131.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:32.086Z,1528880132.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:32.492Z,1528880132.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:32.921Z,1528880132.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:33.292Z,1528880133.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:33.687Z,1528880133.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:34.087Z,1528880134.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:34.484Z,1528880134.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:34.888Z,1528880134.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:35.287Z,1528880135.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:35.696Z,1528880135.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:36.095Z,1528880136.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:36.496Z,1528880136.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:36.896Z,1528880136.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:37.286Z,1528880137.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:37.689Z,1528880137.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:38.088Z,1528880138.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:38.496Z,1528880138.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:38.900Z,1528880138.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:39.293Z,1528880139.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:39.687Z,1528880139.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:40.087Z,1528880140.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:40.486Z,1528880140.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:40.886Z,1528880140.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:41.286Z,1528880141.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:41.697Z,1528880141.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:42.095Z,1528880142.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:42.500Z,1528880142.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:42.886Z,1528880142.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:43.286Z,1528880143.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:43.692Z,1528880143.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:44.087Z,1528880144.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:47.198Z,1528880147.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:47.201Z,1528880147.201 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T08:50:44.2Z
2018-06-13T08:55:47.202Z,1528880147.202 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T08:55:47.202Z,1528880147.202 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T08:55:47.359Z,1528880147.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:48.537Z,1528880148.537 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:48.537Z,1528880148.537 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 110
2018-06-13T08:55:48.537Z,1528880148.537 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:55:48.539Z,1528880148.539 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:48.539Z,1528880148.539 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 110
2018-06-13T08:55:48.539Z,1528880148.539 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:55:48.540Z,1528880148.540 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:48.541Z,1528880148.541 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 110
2018-06-13T08:55:48.541Z,1528880148.541 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:55:48.633Z,1528880148.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:55:48.633Z,1528880148.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:55:48.633Z,1528880148.633 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:55:48.781Z,1528880148.781 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:55:48.781Z,1528880148.781 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 110
2018-06-13T08:55:48.782Z,1528880148.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:55:48.782Z,1528880148.782 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 110
2018-06-13T08:55:48.782Z,1528880148.782 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:55:48.782Z,1528880148.782 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 110
2018-06-13T08:55:49.105Z,1528880149.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:55:49.105Z,1528880149.105 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:55:49.105Z,1528880149.105 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:55:49.106Z,1528880149.106 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:55:49.106Z,1528880149.106 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:55:49.106Z,1528880149.106 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:55:49.107Z,1528880149.107 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:55:49.108Z,1528880149.108 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:55:49.108Z,1528880149.108 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:55:49.512Z,1528880149.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T08:55:49.517Z,1528880149.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:49.888Z,1528880149.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T08:55:49.889Z,1528880149.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:50.288Z,1528880150.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T08:55:50.290Z,1528880150.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:50.695Z,1528880150.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T08:55:50.696Z,1528880150.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:53.827Z,1528880153.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T08:55:53.828Z,1528880153.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:53.918Z,1528880153.918 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0128.lzma
2018-06-13T08:55:53.996Z,1528880153.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T08:55:53.996Z,1528880153.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:54.371Z,1528880154.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T08:55:54.372Z,1528880154.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:54.714Z,1528880154.714 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0128.lzma.bak
2018-06-13T08:55:54.714Z,1528880154.714 [DataOverHttps](INFO): SBD MOMSN=8328933
2018-06-13T08:55:54.784Z,1528880154.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T08:55:54.785Z,1528880154.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:56.676Z,1528880156.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T08:55:56.677Z,1528880156.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:56.847Z,1528880156.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T08:55:56.848Z,1528880156.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:55:57.272Z,1528880157.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T08:55:57.273Z,1528880157.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:00.382Z,1528880160.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-06-13T08:56:00.383Z,1528880160.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:00.500Z,1528880160.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:56:00.501Z,1528880160.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:00.907Z,1528880160.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:56:00.908Z,1528880160.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:01.333Z,1528880161.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:56:01.334Z,1528880161.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:01.709Z,1528880161.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:56:01.710Z,1528880161.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:02.113Z,1528880162.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:56:02.114Z,1528880162.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:02.535Z,1528880162.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:56:02.536Z,1528880162.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:02.938Z,1528880162.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:56:02.939Z,1528880162.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:03.324Z,1528880163.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:56:03.325Z,1528880163.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:06.428Z,1528880166.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T08:56:06.429Z,1528880166.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:06.548Z,1528880166.548 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0129.lzma
2018-06-13T08:56:06.586Z,1528880166.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T08:56:06.587Z,1528880166.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:07.014Z,1528880167.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T08:56:07.015Z,1528880167.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:07.342Z,1528880167.342 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0129.lzma.bak
2018-06-13T08:56:07.342Z,1528880167.342 [DataOverHttps](INFO): SBD MOMSN=8328936
2018-06-13T08:56:07.428Z,1528880167.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T08:56:07.429Z,1528880167.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:09.291Z,1528880169.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:09.294Z,1528880169.294 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T08:56:09.294Z,1528880169.294 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T08:56:09.294Z,1528880169.294 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T08:56:09.461Z,1528880169.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:09.840Z,1528880169.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:12.976Z,1528880172.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:13.141Z,1528880173.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:13.532Z,1528880173.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:13.928Z,1528880173.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:14.324Z,1528880174.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:14.722Z,1528880174.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:15.128Z,1528880175.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:15.526Z,1528880175.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:15.929Z,1528880175.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:16.325Z,1528880176.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:16.719Z,1528880176.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:17.123Z,1528880177.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:17.524Z,1528880177.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:17.914Z,1528880177.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:18.315Z,1528880178.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:18.712Z,1528880178.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:19.113Z,1528880179.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:19.528Z,1528880179.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:19.923Z,1528880179.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:20.323Z,1528880180.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:20.715Z,1528880180.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:21.112Z,1528880181.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:21.555Z,1528880181.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:21.913Z,1528880181.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:22.325Z,1528880182.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:22.754Z,1528880182.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:23.191Z,1528880183.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:23.525Z,1528880183.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:23.926Z,1528880183.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:24.332Z,1528880184.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:24.724Z,1528880184.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:25.124Z,1528880185.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:25.540Z,1528880185.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:25.927Z,1528880185.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:26.331Z,1528880186.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:26.737Z,1528880186.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:27.109Z,1528880187.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:27.536Z,1528880187.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:27.910Z,1528880187.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:28.309Z,1528880188.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:28.736Z,1528880188.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:29.138Z,1528880189.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:29.539Z,1528880189.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:29.913Z,1528880189.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:30.312Z,1528880190.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:30.712Z,1528880190.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:31.113Z,1528880191.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:31.532Z,1528880191.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:31.941Z,1528880191.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:32.339Z,1528880192.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:32.710Z,1528880192.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:33.111Z,1528880193.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:33.516Z,1528880193.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:33.916Z,1528880193.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:34.312Z,1528880194.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:34.723Z,1528880194.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:35.124Z,1528880195.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:35.519Z,1528880195.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:35.920Z,1528880195.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:36.316Z,1528880196.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:36.717Z,1528880196.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:37.114Z,1528880197.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:37.519Z,1528880197.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:37.924Z,1528880197.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:38.319Z,1528880198.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:38.712Z,1528880198.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:39.120Z,1528880199.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:39.513Z,1528880199.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:39.912Z,1528880199.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:40.314Z,1528880200.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:40.720Z,1528880200.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:41.119Z,1528880201.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:41.519Z,1528880201.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:41.916Z,1528880201.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:42.316Z,1528880202.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:42.714Z,1528880202.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:43.116Z,1528880203.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:43.521Z,1528880203.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:43.923Z,1528880203.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:44.319Z,1528880204.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:44.711Z,1528880204.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:45.113Z,1528880205.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:45.514Z,1528880205.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:45.912Z,1528880205.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:46.314Z,1528880206.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:46.719Z,1528880206.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:47.118Z,1528880207.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:47.520Z,1528880207.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:47.913Z,1528880207.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:48.314Z,1528880208.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:48.713Z,1528880208.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:49.113Z,1528880209.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:49.518Z,1528880209.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:49.923Z,1528880209.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:50.319Z,1528880210.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:50.711Z,1528880210.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:51.120Z,1528880211.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:51.513Z,1528880211.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:51.911Z,1528880211.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:52.314Z,1528880212.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:52.719Z,1528880212.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:53.118Z,1528880213.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:53.519Z,1528880213.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:53.913Z,1528880213.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:54.316Z,1528880214.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:54.714Z,1528880214.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:55.116Z,1528880215.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:55.518Z,1528880215.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:55.923Z,1528880215.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:56.319Z,1528880216.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:56.716Z,1528880216.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:57.114Z,1528880217.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:57.519Z,1528880217.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:57.919Z,1528880217.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:58.323Z,1528880218.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:58.713Z,1528880218.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:59.112Z,1528880219.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:59.523Z,1528880219.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:56:59.926Z,1528880219.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:00.324Z,1528880220.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:00.714Z,1528880220.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:01.113Z,1528880221.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:01.517Z,1528880221.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:01.923Z,1528880221.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:02.319Z,1528880222.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:02.720Z,1528880222.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:03.114Z,1528880223.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:03.519Z,1528880223.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:03.919Z,1528880223.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:04.323Z,1528880224.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:04.716Z,1528880224.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:05.112Z,1528880225.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:05.523Z,1528880225.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:05.923Z,1528880225.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:06.326Z,1528880226.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:06.713Z,1528880226.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:07.122Z,1528880227.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:07.519Z,1528880227.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:07.919Z,1528880227.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:08.319Z,1528880228.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:08.716Z,1528880228.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:09.112Z,1528880229.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:09.527Z,1528880229.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:09.927Z,1528880229.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:13.049Z,1528880233.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:13.204Z,1528880233.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:13.597Z,1528880233.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:14.006Z,1528880234.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:14.384Z,1528880234.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:14.812Z,1528880234.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:15.207Z,1528880235.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:15.611Z,1528880235.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:15.988Z,1528880235.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:16.384Z,1528880236.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:16.789Z,1528880236.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:17.189Z,1528880237.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:17.596Z,1528880237.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:17.995Z,1528880237.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:18.421Z,1528880238.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:18.786Z,1528880238.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:19.187Z,1528880239.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:19.592Z,1528880239.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:19.987Z,1528880239.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:20.390Z,1528880240.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:20.799Z,1528880240.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:21.195Z,1528880241.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:21.596Z,1528880241.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:21.988Z,1528880241.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:22.387Z,1528880242.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:22.791Z,1528880242.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:23.191Z,1528880243.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:23.593Z,1528880243.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:23.999Z,1528880243.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:24.396Z,1528880244.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:24.787Z,1528880244.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:25.190Z,1528880245.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:25.591Z,1528880245.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:25.987Z,1528880245.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:26.396Z,1528880246.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:26.800Z,1528880246.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:27.195Z,1528880247.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:27.595Z,1528880247.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:27.991Z,1528880247.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:28.392Z,1528880248.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:28.790Z,1528880248.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:29.191Z,1528880249.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:29.596Z,1528880249.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:29.998Z,1528880249.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:30.400Z,1528880250.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:30.786Z,1528880250.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:31.191Z,1528880251.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:31.591Z,1528880251.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:31.987Z,1528880251.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:32.390Z,1528880252.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:32.799Z,1528880252.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:33.200Z,1528880253.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:33.595Z,1528880253.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:33.999Z,1528880253.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:34.386Z,1528880254.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:34.790Z,1528880254.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:35.191Z,1528880255.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:35.595Z,1528880255.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:35.995Z,1528880255.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:36.400Z,1528880256.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:36.792Z,1528880256.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:37.189Z,1528880257.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:37.590Z,1528880257.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:37.988Z,1528880257.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:38.387Z,1528880258.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:38.799Z,1528880258.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:39.195Z,1528880259.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:39.595Z,1528880259.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:39.991Z,1528880259.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:40.386Z,1528880260.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:40.790Z,1528880260.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:41.190Z,1528880261.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:41.596Z,1528880261.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:41.998Z,1528880261.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:42.399Z,1528880262.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:42.787Z,1528880262.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:43.190Z,1528880263.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:43.587Z,1528880263.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:43.987Z,1528880263.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:44.390Z,1528880264.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:44.800Z,1528880264.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:45.195Z,1528880265.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:45.595Z,1528880265.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:45.996Z,1528880265.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:46.392Z,1528880266.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:46.790Z,1528880266.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:47.191Z,1528880267.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:47.595Z,1528880267.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:47.998Z,1528880267.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:48.399Z,1528880268.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:48.787Z,1528880268.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:49.190Z,1528880269.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:49.604Z,1528880269.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:50.004Z,1528880270.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:50.400Z,1528880270.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:50.792Z,1528880270.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:51.195Z,1528880271.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:51.599Z,1528880271.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:52.001Z,1528880272.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:52.408Z,1528880272.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:52.788Z,1528880272.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:53.198Z,1528880273.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:53.597Z,1528880273.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:54.001Z,1528880274.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:54.403Z,1528880274.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:54.794Z,1528880274.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:55.198Z,1528880275.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:55.603Z,1528880275.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:56.002Z,1528880276.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:56.403Z,1528880276.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:56.804Z,1528880276.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:57.176Z,1528880277.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:57.603Z,1528880277.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:58.009Z,1528880278.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:58.403Z,1528880278.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:58.797Z,1528880278.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:59.182Z,1528880279.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:57:59.610Z,1528880279.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:00.015Z,1528880280.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:00.410Z,1528880280.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:00.785Z,1528880280.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:01.188Z,1528880281.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:01.611Z,1528880281.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:01.995Z,1528880281.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:02.391Z,1528880282.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:02.794Z,1528880282.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:03.196Z,1528880283.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:03.596Z,1528880283.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:03.999Z,1528880283.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:04.392Z,1528880284.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:04.788Z,1528880284.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:05.198Z,1528880285.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:05.593Z,1528880285.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:06.000Z,1528880286.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:06.396Z,1528880286.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:06.792Z,1528880286.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:07.188Z,1528880287.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:07.600Z,1528880287.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:07.997Z,1528880287.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:08.400Z,1528880288.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:08.790Z,1528880288.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:09.184Z,1528880289.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:09.604Z,1528880289.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:10.001Z,1528880290.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:13.103Z,1528880293.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:13.284Z,1528880293.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:13.652Z,1528880293.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:14.056Z,1528880294.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:14.450Z,1528880294.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:14.859Z,1528880294.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:15.256Z,1528880295.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:15.656Z,1528880295.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:16.052Z,1528880296.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:16.448Z,1528880296.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:16.854Z,1528880296.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:17.263Z,1528880297.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:17.655Z,1528880297.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:18.059Z,1528880298.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:18.459Z,1528880298.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:18.850Z,1528880298.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:19.251Z,1528880299.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:19.652Z,1528880299.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:20.048Z,1528880300.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:20.450Z,1528880300.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:20.860Z,1528880300.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:21.256Z,1528880301.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:21.655Z,1528880301.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:22.052Z,1528880302.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:22.448Z,1528880302.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:22.851Z,1528880302.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:23.261Z,1528880303.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:23.657Z,1528880303.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:24.064Z,1528880304.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:24.460Z,1528880304.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:24.849Z,1528880304.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:25.250Z,1528880305.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:25.668Z,1528880305.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:26.059Z,1528880306.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:26.464Z,1528880306.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:26.852Z,1528880306.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:27.256Z,1528880307.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:27.660Z,1528880307.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:28.060Z,1528880308.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:28.457Z,1528880308.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:28.852Z,1528880308.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:29.259Z,1528880309.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:29.658Z,1528880309.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:30.064Z,1528880310.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:30.461Z,1528880310.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:30.849Z,1528880310.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:31.256Z,1528880311.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:31.660Z,1528880311.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:32.059Z,1528880312.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:32.460Z,1528880312.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:32.853Z,1528880312.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:33.248Z,1528880313.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:33.664Z,1528880313.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:34.068Z,1528880314.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:34.458Z,1528880314.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:34.854Z,1528880314.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:35.254Z,1528880315.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:35.657Z,1528880315.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:36.060Z,1528880316.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:36.461Z,1528880316.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:36.849Z,1528880316.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:37.256Z,1528880317.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:37.661Z,1528880317.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:38.061Z,1528880318.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:38.461Z,1528880318.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:38.853Z,1528880318.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:39.250Z,1528880319.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:39.659Z,1528880319.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:40.062Z,1528880320.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:40.457Z,1528880320.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:40.852Z,1528880320.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:41.251Z,1528880321.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:41.657Z,1528880321.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:42.061Z,1528880322.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:42.461Z,1528880322.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:42.849Z,1528880322.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:43.250Z,1528880323.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:43.660Z,1528880323.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:44.062Z,1528880324.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:44.460Z,1528880324.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:44.852Z,1528880324.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:45.248Z,1528880325.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:45.664Z,1528880325.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:46.061Z,1528880326.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:46.460Z,1528880326.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:46.856Z,1528880326.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:47.252Z,1528880327.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:47.660Z,1528880327.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:48.064Z,1528880328.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:48.461Z,1528880328.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:48.851Z,1528880328.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:49.252Z,1528880329.252 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:49.252Z,1528880329.252 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 111
2018-06-13T08:58:49.252Z,1528880329.252 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T08:58:49.254Z,1528880329.254 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:49.254Z,1528880329.254 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 111
2018-06-13T08:58:49.254Z,1528880329.254 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T08:58:49.256Z,1528880329.256 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:49.256Z,1528880329.256 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 111
2018-06-13T08:58:49.256Z,1528880329.256 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T08:58:49.334Z,1528880329.334 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T08:58:49.334Z,1528880329.334 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T08:58:49.334Z,1528880329.334 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T08:58:49.746Z,1528880329.746 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T08:58:49.747Z,1528880329.747 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 111
2018-06-13T08:58:49.747Z,1528880329.747 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T08:58:49.747Z,1528880329.747 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 111
2018-06-13T08:58:49.748Z,1528880329.748 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T08:58:49.748Z,1528880329.748 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 111
2018-06-13T08:58:50.067Z,1528880330.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T08:58:50.067Z,1528880330.067 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:58:50.068Z,1528880330.068 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:58:50.068Z,1528880330.068 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T08:58:50.068Z,1528880330.068 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:58:50.069Z,1528880330.069 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:58:50.069Z,1528880330.069 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T08:58:50.070Z,1528880330.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T08:58:50.070Z,1528880330.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T08:58:50.469Z,1528880330.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T08:58:50.470Z,1528880330.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:50.845Z,1528880330.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T08:58:50.846Z,1528880330.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:51.244Z,1528880331.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T08:58:51.245Z,1528880331.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:51.674Z,1528880331.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T08:58:51.675Z,1528880331.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:52.073Z,1528880332.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T08:58:52.074Z,1528880332.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:52.474Z,1528880332.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T08:58:52.475Z,1528880332.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:52.848Z,1528880332.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T08:58:52.850Z,1528880332.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:53.246Z,1528880333.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T08:58:53.247Z,1528880333.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:53.675Z,1528880333.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T08:58:53.676Z,1528880333.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:54.058Z,1528880334.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T08:58:54.059Z,1528880334.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:54.459Z,1528880334.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T08:58:54.460Z,1528880334.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:54.849Z,1528880334.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T08:58:54.850Z,1528880334.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:55.249Z,1528880335.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T08:58:55.250Z,1528880335.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:55.659Z,1528880335.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T08:58:55.660Z,1528880335.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:56.058Z,1528880336.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T08:58:56.059Z,1528880336.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:56.478Z,1528880336.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T08:58:56.479Z,1528880336.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:56.850Z,1528880336.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T08:58:56.851Z,1528880336.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:57.249Z,1528880337.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T08:58:57.250Z,1528880337.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:57.655Z,1528880337.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T08:58:57.655Z,1528880337.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:58.059Z,1528880338.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T08:58:58.060Z,1528880338.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:58.456Z,1528880338.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T08:58:58.457Z,1528880338.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:58.849Z,1528880338.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T08:58:58.850Z,1528880338.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:59.251Z,1528880339.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T08:58:59.252Z,1528880339.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:58:59.655Z,1528880339.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T08:58:59.656Z,1528880339.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:00.058Z,1528880340.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T08:59:00.059Z,1528880340.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:00.459Z,1528880340.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T08:59:00.460Z,1528880340.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:00.852Z,1528880340.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T08:59:00.853Z,1528880340.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:01.256Z,1528880341.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T08:59:01.257Z,1528880341.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:01.649Z,1528880341.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T08:59:01.650Z,1528880341.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:02.059Z,1528880342.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T08:59:02.060Z,1528880342.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:02.459Z,1528880342.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T08:59:02.460Z,1528880342.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:02.863Z,1528880342.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T08:59:02.864Z,1528880342.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:03.250Z,1528880343.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T08:59:03.250Z,1528880343.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:03.652Z,1528880343.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T08:59:03.653Z,1528880343.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:04.060Z,1528880344.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T08:59:04.061Z,1528880344.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:04.448Z,1528880344.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T08:59:04.450Z,1528880344.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:04.855Z,1528880344.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T08:59:04.855Z,1528880344.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:05.263Z,1528880345.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T08:59:05.264Z,1528880345.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:05.655Z,1528880345.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T08:59:05.656Z,1528880345.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:06.049Z,1528880346.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T08:59:06.050Z,1528880346.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:06.450Z,1528880346.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T08:59:06.451Z,1528880346.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:06.856Z,1528880346.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T08:59:06.857Z,1528880346.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:07.249Z,1528880347.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T08:59:07.250Z,1528880347.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:07.649Z,1528880347.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T08:59:07.650Z,1528880347.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:08.058Z,1528880348.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T08:59:08.059Z,1528880348.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:08.458Z,1528880348.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T08:59:08.459Z,1528880348.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:08.858Z,1528880348.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T08:59:08.859Z,1528880348.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:09.256Z,1528880349.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:09.651Z,1528880349.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:10.052Z,1528880350.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:10.449Z,1528880350.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:10.863Z,1528880350.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:11.262Z,1528880351.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:14.386Z,1528880354.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:14.536Z,1528880354.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:14.928Z,1528880354.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:15.316Z,1528880355.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:15.723Z,1528880355.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:16.122Z,1528880356.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:16.523Z,1528880356.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:16.916Z,1528880356.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:17.311Z,1528880357.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:17.723Z,1528880357.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:18.124Z,1528880358.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:18.523Z,1528880358.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:18.914Z,1528880358.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:19.316Z,1528880359.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:19.723Z,1528880359.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:20.123Z,1528880360.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:20.523Z,1528880360.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:20.917Z,1528880360.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:21.314Z,1528880361.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:21.723Z,1528880361.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:22.122Z,1528880362.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:22.523Z,1528880362.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:22.920Z,1528880362.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:23.318Z,1528880363.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:23.719Z,1528880363.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:24.119Z,1528880364.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:24.523Z,1528880364.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:24.916Z,1528880364.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:25.314Z,1528880365.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:25.744Z,1528880365.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:26.123Z,1528880366.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:26.523Z,1528880366.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:26.937Z,1528880366.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:27.312Z,1528880367.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:27.728Z,1528880367.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:28.124Z,1528880368.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:28.516Z,1528880368.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:28.916Z,1528880368.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:29.327Z,1528880369.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:29.721Z,1528880369.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:30.125Z,1528880370.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:30.536Z,1528880370.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:30.920Z,1528880370.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:31.320Z,1528880371.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:31.734Z,1528880371.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:32.125Z,1528880372.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:32.529Z,1528880372.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:32.922Z,1528880372.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:33.320Z,1528880373.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:33.726Z,1528880373.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:34.130Z,1528880374.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:34.522Z,1528880374.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:34.913Z,1528880374.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:35.320Z,1528880375.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:35.723Z,1528880375.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:36.136Z,1528880376.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:36.531Z,1528880376.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:36.917Z,1528880376.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:37.317Z,1528880377.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:37.730Z,1528880377.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:38.124Z,1528880378.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:38.524Z,1528880378.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:38.924Z,1528880378.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:39.316Z,1528880379.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:39.725Z,1528880379.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:40.130Z,1528880380.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:40.521Z,1528880380.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:40.917Z,1528880380.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:41.321Z,1528880381.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:41.721Z,1528880381.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:42.129Z,1528880382.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:42.529Z,1528880382.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:42.916Z,1528880382.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:43.315Z,1528880383.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:43.730Z,1528880383.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:44.121Z,1528880384.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:44.528Z,1528880384.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:44.930Z,1528880384.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:45.321Z,1528880385.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:45.716Z,1528880385.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:46.121Z,1528880386.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:46.516Z,1528880386.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:46.929Z,1528880386.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:47.336Z,1528880387.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:47.723Z,1528880387.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:48.117Z,1528880388.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:48.520Z,1528880388.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:48.918Z,1528880388.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:49.315Z,1528880389.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:49.727Z,1528880389.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:50.121Z,1528880390.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:50.528Z,1528880390.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:50.942Z,1528880390.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:51.322Z,1528880391.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:51.716Z,1528880391.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:52.120Z,1528880392.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:52.522Z,1528880392.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:52.932Z,1528880392.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:53.331Z,1528880393.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:53.725Z,1528880393.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:54.122Z,1528880394.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:54.524Z,1528880394.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:54.921Z,1528880394.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:55.322Z,1528880395.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:55.724Z,1528880395.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:56.129Z,1528880396.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:56.535Z,1528880396.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:56.930Z,1528880396.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:57.316Z,1528880397.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:57.724Z,1528880397.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:58.122Z,1528880398.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:58.508Z,1528880398.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:58.934Z,1528880398.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:59.333Z,1528880399.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T08:59:59.735Z,1528880399.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:00.108Z,1528880400.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:00.510Z,1528880400.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:00.909Z,1528880400.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:01.318Z,1528880401.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:01.712Z,1528880401.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:02.123Z,1528880402.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:02.523Z,1528880402.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:02.923Z,1528880402.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:03.322Z,1528880403.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:03.714Z,1528880403.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:04.116Z,1528880404.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:04.516Z,1528880404.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:04.920Z,1528880404.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:05.350Z,1528880405.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:05.720Z,1528880405.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:06.113Z,1528880406.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:06.515Z,1528880406.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:06.914Z,1528880406.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:07.315Z,1528880407.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:07.720Z,1528880407.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:08.120Z,1528880408.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:08.523Z,1528880408.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:08.923Z,1528880408.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:09.313Z,1528880409.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:09.716Z,1528880409.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:10.117Z,1528880410.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:13.232Z,1528880413.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:13.407Z,1528880413.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:13.804Z,1528880413.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:14.212Z,1528880414.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:14.580Z,1528880414.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:14.981Z,1528880414.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:15.376Z,1528880415.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:15.804Z,1528880415.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:16.204Z,1528880416.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:16.605Z,1528880416.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:16.984Z,1528880416.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:17.381Z,1528880417.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:17.808Z,1528880417.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:18.216Z,1528880418.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:18.616Z,1528880418.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:18.983Z,1528880418.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:19.382Z,1528880419.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:19.796Z,1528880419.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:20.196Z,1528880420.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:20.588Z,1528880420.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:20.984Z,1528880420.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:21.382Z,1528880421.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:21.792Z,1528880421.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:22.212Z,1528880422.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:22.592Z,1528880422.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:22.984Z,1528880422.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:23.395Z,1528880423.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:23.780Z,1528880423.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:24.192Z,1528880424.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:24.600Z,1528880424.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:24.992Z,1528880424.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:25.384Z,1528880425.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:25.784Z,1528880425.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:26.181Z,1528880426.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:26.583Z,1528880426.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:26.994Z,1528880426.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:27.391Z,1528880427.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:27.800Z,1528880427.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:28.185Z,1528880428.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:28.582Z,1528880428.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:28.984Z,1528880428.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:29.384Z,1528880429.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:29.783Z,1528880429.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:30.196Z,1528880430.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:30.596Z,1528880430.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:30.988Z,1528880430.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:31.384Z,1528880431.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:31.785Z,1528880431.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:32.181Z,1528880432.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:32.582Z,1528880432.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:33.017Z,1528880433.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:33.396Z,1528880433.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:33.796Z,1528880433.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:34.184Z,1528880434.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:34.581Z,1528880434.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:34.984Z,1528880434.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:35.388Z,1528880435.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:35.780Z,1528880435.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:36.196Z,1528880436.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:36.595Z,1528880436.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:36.989Z,1528880436.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:37.384Z,1528880437.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:37.784Z,1528880437.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:38.188Z,1528880438.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:38.585Z,1528880438.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:39.001Z,1528880439.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:39.400Z,1528880439.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:39.796Z,1528880439.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:40.188Z,1528880440.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:40.585Z,1528880440.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:40.984Z,1528880440.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:41.396Z,1528880441.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:41.780Z,1528880441.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:42.200Z,1528880442.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:42.605Z,1528880442.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:42.989Z,1528880442.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:43.385Z,1528880443.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:43.787Z,1528880443.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:44.184Z,1528880444.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:44.584Z,1528880444.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:44.998Z,1528880444.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:45.394Z,1528880445.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:45.801Z,1528880445.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:46.198Z,1528880446.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:46.590Z,1528880446.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:46.985Z,1528880446.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:47.399Z,1528880447.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:47.793Z,1528880447.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:48.205Z,1528880448.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:48.595Z,1528880448.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:48.996Z,1528880448.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:49.395Z,1528880449.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:49.802Z,1528880449.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:50.195Z,1528880450.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:50.595Z,1528880450.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:51.003Z,1528880451.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:51.396Z,1528880451.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:51.801Z,1528880451.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:52.194Z,1528880452.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:52.572Z,1528880452.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:52.998Z,1528880452.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:53.377Z,1528880453.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:53.776Z,1528880453.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:54.209Z,1528880454.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:54.604Z,1528880454.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:55.007Z,1528880455.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:55.381Z,1528880455.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:55.780Z,1528880455.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:56.180Z,1528880456.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:56.580Z,1528880456.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:57.012Z,1528880457.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:57.407Z,1528880457.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:57.791Z,1528880457.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:58.182Z,1528880458.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:58.579Z,1528880458.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:58.983Z,1528880458.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:59.382Z,1528880459.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:00:59.781Z,1528880459.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:00.187Z,1528880460.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:00.588Z,1528880460.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:00.988Z,1528880460.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:01.381Z,1528880461.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:01.782Z,1528880461.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:02.182Z,1528880462.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:02.582Z,1528880462.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:02.986Z,1528880462.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:03.387Z,1528880463.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:03.788Z,1528880463.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:04.181Z,1528880464.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:04.583Z,1528880464.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:04.988Z,1528880464.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:05.382Z,1528880465.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:05.781Z,1528880465.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:06.187Z,1528880466.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:06.591Z,1528880466.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:06.987Z,1528880466.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:07.382Z,1528880467.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:07.782Z,1528880467.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:08.183Z,1528880468.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:08.586Z,1528880468.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:08.991Z,1528880468.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:09.391Z,1528880469.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:09.791Z,1528880469.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:09.794Z,1528880469.794 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T09:01:09.794Z,1528880469.794 [Default:CheckIn:C.Wait] Stopped
2018-06-13T09:01:09.794Z,1528880469.794 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T09:01:09.794Z,1528880469.794 [Default:CheckIn:D] Running Loop=1
2018-06-13T09:01:10.187Z,1528880470.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:10.190Z,1528880470.190 [Default:CheckIn:D] Stopped
2018-06-13T09:01:10.190Z,1528880470.190 [Default:CheckIn:E] Running Loop=1
2018-06-13T09:01:13.291Z,1528880473.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:13.294Z,1528880473.294 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 333.945736 min 
2018-06-13T09:01:13.294Z,1528880473.294 [Default:CheckIn:E] Stopped
2018-06-13T09:01:13.295Z,1528880473.295 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T09:01:13.295Z,1528880473.295 [Default:CheckIn] Stopped
2018-06-13T09:01:13.295Z,1528880473.295 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T09:01:13.295Z,1528880473.295 [Default:CheckIn](INFO): Running loop #33
2018-06-13T09:01:13.295Z,1528880473.295 [Default:CheckIn] Running Loop=33
2018-06-13T09:01:13.295Z,1528880473.295 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T09:01:13.295Z,1528880473.295 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T09:01:13.430Z,1528880473.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:13.842Z,1528880473.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:14.245Z,1528880474.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:14.644Z,1528880474.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:15.041Z,1528880475.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:15.437Z,1528880475.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:15.841Z,1528880475.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:16.248Z,1528880476.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:16.649Z,1528880476.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:17.044Z,1528880477.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:17.447Z,1528880477.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:17.842Z,1528880477.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:18.238Z,1528880478.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:18.621Z,1528880478.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:19.046Z,1528880479.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:19.448Z,1528880479.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:19.847Z,1528880479.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:20.222Z,1528880480.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:20.652Z,1528880480.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:21.054Z,1528880481.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:21.450Z,1528880481.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:21.825Z,1528880481.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:22.252Z,1528880482.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:22.646Z,1528880482.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:23.050Z,1528880483.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:23.455Z,1528880483.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:23.848Z,1528880483.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:24.226Z,1528880484.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:24.628Z,1528880484.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:25.055Z,1528880485.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:25.451Z,1528880485.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:25.835Z,1528880485.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:26.226Z,1528880486.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:26.624Z,1528880486.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:27.025Z,1528880487.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:27.424Z,1528880487.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:27.824Z,1528880487.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:28.262Z,1528880488.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:28.635Z,1528880488.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:29.032Z,1528880489.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:29.428Z,1528880489.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:29.827Z,1528880489.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:30.238Z,1528880490.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:30.632Z,1528880490.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:31.038Z,1528880491.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:31.439Z,1528880491.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:31.841Z,1528880491.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:32.235Z,1528880492.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:32.630Z,1528880492.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:33.032Z,1528880493.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:33.429Z,1528880493.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:33.831Z,1528880493.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:34.259Z,1528880494.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:34.644Z,1528880494.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:35.037Z,1528880495.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:35.436Z,1528880495.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:35.836Z,1528880495.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:36.230Z,1528880496.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:36.644Z,1528880496.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:37.038Z,1528880497.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:37.443Z,1528880497.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:37.860Z,1528880497.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:38.240Z,1528880498.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:38.630Z,1528880498.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:39.041Z,1528880499.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:39.438Z,1528880499.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:39.841Z,1528880499.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:40.247Z,1528880500.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:40.646Z,1528880500.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:41.047Z,1528880501.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:41.434Z,1528880501.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:41.822Z,1528880501.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:42.247Z,1528880502.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:42.626Z,1528880502.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:43.052Z,1528880503.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:43.453Z,1528880503.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:43.856Z,1528880503.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:44.228Z,1528880504.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:44.628Z,1528880504.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:45.025Z,1528880505.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:45.428Z,1528880505.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:45.828Z,1528880505.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:46.254Z,1528880506.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:46.651Z,1528880506.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:47.051Z,1528880507.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:47.430Z,1528880507.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:47.824Z,1528880507.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:48.228Z,1528880508.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:48.640Z,1528880508.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:49.037Z,1528880509.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:49.439Z,1528880509.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:49.844Z,1528880509.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:50.236Z,1528880510.236 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:50.236Z,1528880510.236 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 112
2018-06-13T09:01:50.236Z,1528880510.236 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:01:50.238Z,1528880510.238 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:50.238Z,1528880510.238 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 112
2018-06-13T09:01:50.238Z,1528880510.238 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:01:50.240Z,1528880510.240 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:50.240Z,1528880510.240 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 112
2018-06-13T09:01:50.240Z,1528880510.240 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:01:50.333Z,1528880510.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:01:50.333Z,1528880510.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:01:50.334Z,1528880510.334 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:01:50.709Z,1528880510.709 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:01:50.709Z,1528880510.709 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 112
2018-06-13T09:01:50.710Z,1528880510.710 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:01:50.710Z,1528880510.710 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 112
2018-06-13T09:01:50.710Z,1528880510.710 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:01:50.710Z,1528880510.710 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 112
2018-06-13T09:01:51.038Z,1528880511.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:01:51.039Z,1528880511.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:01:51.039Z,1528880511.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:01:51.039Z,1528880511.039 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:01:51.040Z,1528880511.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:01:51.040Z,1528880511.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:01:51.040Z,1528880511.040 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:01:51.045Z,1528880511.045 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:01:51.046Z,1528880511.046 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:01:51.437Z,1528880511.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:01:51.438Z,1528880511.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:51.837Z,1528880511.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:01:51.838Z,1528880511.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:52.243Z,1528880512.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:01:52.244Z,1528880512.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:52.644Z,1528880512.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:01:52.645Z,1528880512.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:53.044Z,1528880513.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:01:53.045Z,1528880513.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:53.439Z,1528880513.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:01:53.440Z,1528880513.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:53.839Z,1528880513.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:01:53.840Z,1528880513.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:54.242Z,1528880514.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:01:54.243Z,1528880514.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:54.625Z,1528880514.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:01:54.626Z,1528880514.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:55.050Z,1528880515.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:01:55.051Z,1528880515.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:55.446Z,1528880515.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:01:55.447Z,1528880515.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:55.839Z,1528880515.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:01:55.840Z,1528880515.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:56.231Z,1528880516.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:01:56.232Z,1528880516.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:56.631Z,1528880516.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:01:56.632Z,1528880516.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:57.033Z,1528880517.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:01:57.034Z,1528880517.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:57.431Z,1528880517.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:01:57.432Z,1528880517.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:57.836Z,1528880517.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:01:57.837Z,1528880517.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:58.241Z,1528880518.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:01:58.242Z,1528880518.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:58.640Z,1528880518.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:01:58.641Z,1528880518.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:59.036Z,1528880519.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:01:59.038Z,1528880519.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:59.432Z,1528880519.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:01:59.434Z,1528880519.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:01:59.830Z,1528880519.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:01:59.831Z,1528880519.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:00.231Z,1528880520.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:02:00.232Z,1528880520.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:00.634Z,1528880520.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:02:00.635Z,1528880520.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:01.048Z,1528880521.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:02:01.049Z,1528880521.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:01.443Z,1528880521.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:02:01.443Z,1528880521.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:01.843Z,1528880521.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:02:01.844Z,1528880521.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:02.234Z,1528880522.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:02:02.235Z,1528880522.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:02.636Z,1528880522.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:02:02.637Z,1528880522.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:03.037Z,1528880523.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:02:03.038Z,1528880523.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:03.430Z,1528880523.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:02:03.431Z,1528880523.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:03.833Z,1528880523.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:02:03.834Z,1528880523.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:04.248Z,1528880524.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:02:04.249Z,1528880524.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:04.642Z,1528880524.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:02:04.643Z,1528880524.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:05.053Z,1528880525.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:02:05.054Z,1528880525.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:05.435Z,1528880525.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:02:05.435Z,1528880525.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:05.831Z,1528880525.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:02:05.832Z,1528880525.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:06.234Z,1528880526.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:02:06.235Z,1528880526.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:06.637Z,1528880526.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:02:06.638Z,1528880526.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:07.040Z,1528880527.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:02:07.041Z,1528880527.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:07.440Z,1528880527.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:02:07.441Z,1528880527.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:07.845Z,1528880527.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:02:07.846Z,1528880527.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:08.238Z,1528880528.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:02:08.239Z,1528880528.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:08.640Z,1528880528.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:02:08.645Z,1528880528.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:09.035Z,1528880529.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:02:09.036Z,1528880529.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:09.436Z,1528880529.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:02:09.437Z,1528880529.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:09.844Z,1528880529.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:02:09.845Z,1528880529.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:10.248Z,1528880530.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:13.348Z,1528880533.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:13.491Z,1528880533.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:13.882Z,1528880533.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:14.287Z,1528880534.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:14.681Z,1528880534.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:15.090Z,1528880535.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:15.495Z,1528880535.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:15.889Z,1528880535.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:16.288Z,1528880536.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:16.689Z,1528880536.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:17.090Z,1528880537.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:17.492Z,1528880537.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:17.893Z,1528880537.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:18.298Z,1528880538.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:18.695Z,1528880538.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:19.092Z,1528880539.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:19.490Z,1528880539.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:19.910Z,1528880539.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:20.275Z,1528880540.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:20.689Z,1528880540.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:21.093Z,1528880541.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:21.484Z,1528880541.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:21.888Z,1528880541.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:22.291Z,1528880542.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:22.678Z,1528880542.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:23.079Z,1528880543.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:23.481Z,1528880543.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:23.879Z,1528880543.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:24.288Z,1528880544.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:24.688Z,1528880544.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:25.084Z,1528880545.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:25.478Z,1528880545.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:25.884Z,1528880545.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:26.277Z,1528880546.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:26.678Z,1528880546.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:27.096Z,1528880547.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:27.486Z,1528880547.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:27.892Z,1528880547.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:28.281Z,1528880548.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:28.692Z,1528880548.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:29.077Z,1528880549.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:29.481Z,1528880549.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:29.880Z,1528880549.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:30.289Z,1528880550.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:30.699Z,1528880550.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:31.092Z,1528880551.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:31.478Z,1528880551.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:31.887Z,1528880551.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:32.279Z,1528880552.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:32.684Z,1528880552.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:33.091Z,1528880553.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:33.488Z,1528880553.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:33.887Z,1528880553.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:34.281Z,1528880554.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:34.680Z,1528880554.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:35.082Z,1528880555.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:35.500Z,1528880555.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:35.882Z,1528880555.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:36.288Z,1528880556.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:36.694Z,1528880556.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:37.093Z,1528880557.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:37.482Z,1528880557.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:37.883Z,1528880557.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:38.282Z,1528880558.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:38.680Z,1528880558.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:39.090Z,1528880559.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:39.492Z,1528880559.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:39.891Z,1528880559.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:40.284Z,1528880560.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:40.680Z,1528880560.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:41.079Z,1528880561.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:41.492Z,1528880561.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:41.886Z,1528880561.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:42.289Z,1528880562.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:42.696Z,1528880562.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:43.092Z,1528880563.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:43.488Z,1528880563.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:43.886Z,1528880563.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:44.272Z,1528880564.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:44.696Z,1528880564.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:45.100Z,1528880565.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:45.503Z,1528880565.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:45.897Z,1528880565.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:46.303Z,1528880566.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:46.671Z,1528880566.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:47.076Z,1528880567.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:47.475Z,1528880567.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:47.899Z,1528880567.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:48.300Z,1528880568.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:48.702Z,1528880568.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:49.100Z,1528880569.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:49.503Z,1528880569.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:49.881Z,1528880569.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:50.276Z,1528880570.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:50.678Z,1528880570.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:51.111Z,1528880571.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:51.505Z,1528880571.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:51.883Z,1528880571.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:52.280Z,1528880572.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:52.702Z,1528880572.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:53.076Z,1528880573.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:53.484Z,1528880573.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:53.878Z,1528880573.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:54.280Z,1528880574.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:54.681Z,1528880574.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:55.082Z,1528880575.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:55.480Z,1528880575.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:55.903Z,1528880575.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:56.281Z,1528880576.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:56.677Z,1528880576.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:57.087Z,1528880577.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:57.511Z,1528880577.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:57.880Z,1528880577.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:58.280Z,1528880578.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:58.678Z,1528880578.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:59.080Z,1528880579.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:59.483Z,1528880579.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:02:59.886Z,1528880579.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:00.282Z,1528880580.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:00.678Z,1528880580.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:01.082Z,1528880581.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:01.488Z,1528880581.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:01.910Z,1528880581.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:02.282Z,1528880582.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:02.674Z,1528880582.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:03.087Z,1528880583.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:03.488Z,1528880583.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:03.883Z,1528880583.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:04.286Z,1528880584.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:04.672Z,1528880584.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:05.088Z,1528880585.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:05.483Z,1528880585.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:05.882Z,1528880585.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:06.276Z,1528880586.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:06.676Z,1528880586.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:07.080Z,1528880587.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:07.483Z,1528880587.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:07.881Z,1528880587.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:08.277Z,1528880588.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:08.674Z,1528880588.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:09.088Z,1528880589.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:09.483Z,1528880589.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:09.887Z,1528880589.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:10.282Z,1528880590.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:10.679Z,1528880590.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:11.088Z,1528880591.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:11.490Z,1528880591.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:14.595Z,1528880594.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:14.764Z,1528880594.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:15.170Z,1528880595.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:15.569Z,1528880595.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:15.973Z,1528880595.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:16.375Z,1528880596.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:16.771Z,1528880596.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:17.170Z,1528880597.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:17.548Z,1528880597.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:17.948Z,1528880597.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:18.376Z,1528880598.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:18.755Z,1528880598.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:19.183Z,1528880599.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:19.582Z,1528880599.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:19.965Z,1528880599.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:20.359Z,1528880600.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:20.757Z,1528880600.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:21.155Z,1528880601.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:21.557Z,1528880601.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:21.957Z,1528880601.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:22.360Z,1528880602.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:22.768Z,1528880602.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:23.162Z,1528880603.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:23.560Z,1528880603.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:23.958Z,1528880603.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:24.358Z,1528880604.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:24.760Z,1528880604.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:25.168Z,1528880605.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:25.563Z,1528880605.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:25.968Z,1528880605.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:26.359Z,1528880606.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:26.759Z,1528880606.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:27.168Z,1528880607.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:27.561Z,1528880607.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:27.961Z,1528880607.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:28.376Z,1528880608.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:28.772Z,1528880608.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:29.172Z,1528880609.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:29.565Z,1528880609.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:29.965Z,1528880609.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:30.360Z,1528880610.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:30.759Z,1528880610.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:31.169Z,1528880611.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:31.574Z,1528880611.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:31.973Z,1528880611.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:32.359Z,1528880612.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:32.775Z,1528880612.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:33.168Z,1528880613.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:33.561Z,1528880613.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:33.956Z,1528880613.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:34.373Z,1528880614.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:34.779Z,1528880614.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:35.174Z,1528880615.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:35.560Z,1528880615.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:35.972Z,1528880615.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:36.361Z,1528880616.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:36.768Z,1528880616.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:37.170Z,1528880617.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:37.600Z,1528880617.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:37.981Z,1528880617.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:38.368Z,1528880618.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:38.767Z,1528880618.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:39.172Z,1528880619.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:39.564Z,1528880619.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:39.961Z,1528880619.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:40.380Z,1528880620.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:40.784Z,1528880620.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:41.172Z,1528880621.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:41.566Z,1528880621.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:41.963Z,1528880621.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:42.377Z,1528880622.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:42.778Z,1528880622.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:43.170Z,1528880623.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:43.573Z,1528880623.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:43.988Z,1528880623.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:44.368Z,1528880624.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:44.762Z,1528880624.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:45.166Z,1528880625.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:45.582Z,1528880625.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:45.959Z,1528880625.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:46.375Z,1528880626.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:46.774Z,1528880626.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:47.183Z,1528880627.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:47.572Z,1528880627.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:47.973Z,1528880627.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:48.372Z,1528880628.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:48.766Z,1528880628.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:49.181Z,1528880629.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:49.576Z,1528880629.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:49.978Z,1528880629.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:50.377Z,1528880630.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:50.778Z,1528880630.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:51.153Z,1528880631.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:51.552Z,1528880631.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:51.951Z,1528880631.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:52.387Z,1528880632.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:52.784Z,1528880632.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:53.164Z,1528880633.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:53.556Z,1528880633.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:53.951Z,1528880633.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:54.356Z,1528880634.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:54.759Z,1528880634.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:55.164Z,1528880635.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:55.563Z,1528880635.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:55.965Z,1528880635.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:56.354Z,1528880636.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:56.755Z,1528880636.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:57.163Z,1528880637.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:57.561Z,1528880637.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:57.966Z,1528880637.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:58.357Z,1528880638.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:58.752Z,1528880638.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:59.164Z,1528880639.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:59.568Z,1528880639.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:03:59.959Z,1528880639.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:00.357Z,1528880640.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:00.767Z,1528880640.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:01.160Z,1528880641.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:01.563Z,1528880641.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:01.963Z,1528880641.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:02.353Z,1528880642.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:02.754Z,1528880642.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:03.164Z,1528880643.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:03.564Z,1528880643.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:03.964Z,1528880643.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:04.356Z,1528880644.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:04.752Z,1528880644.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:05.163Z,1528880645.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:05.563Z,1528880645.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:05.959Z,1528880645.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:06.351Z,1528880646.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:06.768Z,1528880646.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:07.172Z,1528880647.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:07.568Z,1528880647.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:07.969Z,1528880647.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:08.352Z,1528880648.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:08.756Z,1528880648.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:09.170Z,1528880649.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:09.568Z,1528880649.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:09.968Z,1528880649.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:10.364Z,1528880650.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:13.470Z,1528880653.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:13.622Z,1528880653.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:14.021Z,1528880654.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:14.428Z,1528880654.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:14.814Z,1528880654.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:15.209Z,1528880655.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:15.614Z,1528880655.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:16.015Z,1528880656.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:16.422Z,1528880656.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:16.824Z,1528880656.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:17.215Z,1528880657.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:17.628Z,1528880657.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:18.022Z,1528880658.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:18.393Z,1528880658.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:18.798Z,1528880658.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:19.229Z,1528880659.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:19.606Z,1528880659.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:20.035Z,1528880660.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:20.406Z,1528880660.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:20.800Z,1528880660.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:21.210Z,1528880661.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:21.600Z,1528880661.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:22.006Z,1528880662.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:22.407Z,1528880662.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:22.812Z,1528880662.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:23.211Z,1528880663.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:23.618Z,1528880663.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:24.004Z,1528880664.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:24.403Z,1528880664.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:24.815Z,1528880664.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:25.211Z,1528880665.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:25.613Z,1528880665.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:26.022Z,1528880666.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:26.402Z,1528880666.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:26.813Z,1528880666.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:27.220Z,1528880667.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:27.610Z,1528880667.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:28.015Z,1528880668.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:28.422Z,1528880668.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:28.804Z,1528880668.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:29.210Z,1528880669.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:29.642Z,1528880669.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:30.015Z,1528880670.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:30.411Z,1528880670.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:30.808Z,1528880670.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:31.214Z,1528880671.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:31.619Z,1528880671.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:32.026Z,1528880672.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:32.410Z,1528880672.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:32.804Z,1528880672.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:33.224Z,1528880673.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:33.620Z,1528880673.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:34.011Z,1528880674.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:34.407Z,1528880674.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:34.788Z,1528880674.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:35.219Z,1528880675.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:35.617Z,1528880675.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:36.018Z,1528880676.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:36.394Z,1528880676.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:36.796Z,1528880676.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:37.203Z,1528880677.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:37.606Z,1528880677.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:38.007Z,1528880678.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:38.397Z,1528880678.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:38.798Z,1528880678.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:39.211Z,1528880679.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:39.607Z,1528880679.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:40.008Z,1528880680.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:40.404Z,1528880680.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:40.796Z,1528880680.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:41.207Z,1528880681.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:41.612Z,1528880681.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:42.006Z,1528880682.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:42.401Z,1528880682.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:42.809Z,1528880682.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:43.216Z,1528880683.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:43.612Z,1528880683.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:44.014Z,1528880684.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:44.401Z,1528880684.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:44.799Z,1528880684.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:45.220Z,1528880685.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:45.611Z,1528880685.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:46.012Z,1528880686.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:46.412Z,1528880686.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:46.805Z,1528880686.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:47.208Z,1528880687.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:47.612Z,1528880687.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:48.007Z,1528880688.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:48.405Z,1528880688.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:48.810Z,1528880688.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:49.218Z,1528880689.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:49.615Z,1528880689.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:50.018Z,1528880690.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:50.393Z,1528880690.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:50.813Z,1528880690.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:51.225Z,1528880691.225 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:51.225Z,1528880691.225 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 113
2018-06-13T09:04:51.225Z,1528880691.225 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:04:51.227Z,1528880691.227 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:51.227Z,1528880691.227 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 113
2018-06-13T09:04:51.227Z,1528880691.227 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:04:51.233Z,1528880691.233 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:51.233Z,1528880691.233 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 113
2018-06-13T09:04:51.233Z,1528880691.233 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:04:51.317Z,1528880691.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:04:51.317Z,1528880691.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:04:51.318Z,1528880691.318 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:04:51.697Z,1528880691.697 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:04:51.697Z,1528880691.697 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 113
2018-06-13T09:04:51.698Z,1528880691.698 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:04:51.698Z,1528880691.698 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 113
2018-06-13T09:04:51.698Z,1528880691.698 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:04:51.698Z,1528880691.698 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 113
2018-06-13T09:04:52.002Z,1528880692.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:04:52.002Z,1528880692.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:04:52.002Z,1528880692.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:04:52.003Z,1528880692.003 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:04:52.003Z,1528880692.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:04:52.003Z,1528880692.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:04:52.004Z,1528880692.004 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:04:52.004Z,1528880692.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:04:52.004Z,1528880692.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:04:52.400Z,1528880692.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:04:52.401Z,1528880692.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:52.798Z,1528880692.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:04:52.799Z,1528880692.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:53.207Z,1528880693.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:04:53.208Z,1528880693.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:53.608Z,1528880693.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:04:53.609Z,1528880693.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:54.004Z,1528880694.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:04:54.005Z,1528880694.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:54.398Z,1528880694.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:04:54.399Z,1528880694.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:54.804Z,1528880694.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:04:54.810Z,1528880694.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:55.208Z,1528880695.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:04:55.209Z,1528880695.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:55.612Z,1528880695.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:04:55.613Z,1528880695.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:56.013Z,1528880696.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:04:56.014Z,1528880696.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:56.400Z,1528880696.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:04:56.401Z,1528880696.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:56.799Z,1528880696.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:04:56.800Z,1528880696.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:57.219Z,1528880697.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:04:57.220Z,1528880697.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:57.609Z,1528880697.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:04:57.610Z,1528880697.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:58.008Z,1528880698.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:04:58.009Z,1528880698.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:58.413Z,1528880698.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:04:58.414Z,1528880698.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:58.804Z,1528880698.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:04:58.809Z,1528880698.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:59.209Z,1528880699.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:04:59.210Z,1528880699.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:04:59.615Z,1528880699.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:04:59.616Z,1528880699.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:00.016Z,1528880700.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:05:00.016Z,1528880700.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:00.415Z,1528880700.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:05:00.415Z,1528880700.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:00.805Z,1528880700.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:05:00.806Z,1528880700.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:01.216Z,1528880701.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:05:01.216Z,1528880701.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:01.605Z,1528880701.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:05:01.606Z,1528880701.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:01.992Z,1528880701.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:05:01.993Z,1528880701.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:02.419Z,1528880702.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:05:02.420Z,1528880702.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:02.824Z,1528880702.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:05:02.825Z,1528880702.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:03.226Z,1528880703.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:05:03.227Z,1528880703.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:03.600Z,1528880703.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:05:03.601Z,1528880703.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:03.000Z,1528880704.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:05:04.001Z,1528880704.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:04.396Z,1528880704.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:05:04.397Z,1528880704.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:04.795Z,1528880704.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:05:04.796Z,1528880704.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:05.199Z,1528880705.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:05:05.200Z,1528880705.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:05.608Z,1528880705.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:05:05.617Z,1528880705.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:06.003Z,1528880706.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:05:06.004Z,1528880706.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:06.404Z,1528880706.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:05:06.405Z,1528880706.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:06.798Z,1528880706.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:05:06.799Z,1528880706.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:07.197Z,1528880707.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:05:07.198Z,1528880707.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:07.598Z,1528880707.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:05:07.599Z,1528880707.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:07.998Z,1528880707.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:05:07.999Z,1528880707.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:08.404Z,1528880708.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:05:08.405Z,1528880708.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:08.806Z,1528880708.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:05:08.807Z,1528880708.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:09.207Z,1528880709.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:05:09.208Z,1528880709.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:09.596Z,1528880709.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:05:09.597Z,1528880709.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:10.004Z,1528880710.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:05:10.005Z,1528880710.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:10.399Z,1528880710.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:05:10.399Z,1528880710.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:13.532Z,1528880713.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:13.688Z,1528880713.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:14.035Z,1528880714.035 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T09:05:14.035Z,1528880714.035 [NAL9602] Data Fault, FailCount= 1
2018-06-13T09:05:14.035Z,1528880714.035 [NAL9602](ERROR): Data Fault
2018-06-13T09:05:14.108Z,1528880714.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:14.193Z,1528880714.193 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T09:05:14.431Z,1528880714.431 [NAL9602](INFO): Powering down
2018-06-13T09:05:14.478Z,1528880714.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:14.862Z,1528880714.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:15.265Z,1528880715.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:15.361Z,1528880715.361 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T09:05:15.361Z,1528880715.361 [NAL9602] No Fault, FailCount= 1
2018-06-13T09:05:15.663Z,1528880715.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:16.067Z,1528880716.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:16.463Z,1528880716.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:16.863Z,1528880716.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:17.267Z,1528880717.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:17.663Z,1528880717.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:18.066Z,1528880718.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:18.479Z,1528880718.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:18.866Z,1528880718.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:19.270Z,1528880719.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:19.669Z,1528880719.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:20.067Z,1528880720.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:20.466Z,1528880720.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:20.869Z,1528880720.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:21.270Z,1528880721.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:21.672Z,1528880721.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:22.069Z,1528880722.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:22.466Z,1528880722.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:22.866Z,1528880722.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:23.269Z,1528880723.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:23.665Z,1528880723.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:24.066Z,1528880724.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:24.469Z,1528880724.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:24.872Z,1528880724.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:25.270Z,1528880725.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:25.679Z,1528880725.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:26.072Z,1528880726.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:26.470Z,1528880726.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:26.869Z,1528880726.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:27.269Z,1528880727.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:27.670Z,1528880727.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:28.069Z,1528880728.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:28.465Z,1528880728.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:28.870Z,1528880728.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:29.276Z,1528880729.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:29.666Z,1528880729.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:30.070Z,1528880730.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:30.479Z,1528880730.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:30.865Z,1528880730.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:31.266Z,1528880731.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:31.670Z,1528880731.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:32.072Z,1528880732.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:32.470Z,1528880732.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:32.869Z,1528880732.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:33.269Z,1528880733.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:33.671Z,1528880733.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:34.069Z,1528880734.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:34.472Z,1528880734.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:34.870Z,1528880734.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:35.270Z,1528880735.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:35.669Z,1528880735.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:36.070Z,1528880736.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:36.471Z,1528880736.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:36.865Z,1528880736.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:37.271Z,1528880737.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:37.670Z,1528880737.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:38.065Z,1528880738.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:38.471Z,1528880738.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:38.870Z,1528880738.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:39.269Z,1528880739.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:39.671Z,1528880739.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:40.070Z,1528880740.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:40.478Z,1528880740.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:40.870Z,1528880740.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:41.276Z,1528880741.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:41.669Z,1528880741.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:42.072Z,1528880742.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:42.470Z,1528880742.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:42.870Z,1528880742.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:43.274Z,1528880743.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:43.668Z,1528880743.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:44.084Z,1528880744.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:44.472Z,1528880744.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:44.830Z,1528880744.830 [NAL9602](INFO): Powering up NAL9602
2018-06-13T09:05:44.888Z,1528880744.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:45.280Z,1528880745.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:45.677Z,1528880745.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:46.078Z,1528880746.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:46.484Z,1528880746.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:46.877Z,1528880746.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:47.277Z,1528880747.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:47.679Z,1528880747.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:48.084Z,1528880748.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:48.479Z,1528880748.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:48.880Z,1528880748.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:49.269Z,1528880749.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:49.685Z,1528880749.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:50.092Z,1528880750.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:50.481Z,1528880750.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:50.865Z,1528880750.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:51.264Z,1528880751.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:51.661Z,1528880751.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:52.065Z,1528880752.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:52.464Z,1528880752.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:52.885Z,1528880752.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:53.272Z,1528880753.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:53.667Z,1528880753.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:54.063Z,1528880754.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:54.467Z,1528880754.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:54.868Z,1528880754.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:55.275Z,1528880755.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:55.634Z,1528880755.634 [NAL9602](INFO): NAL9602 initialized
2018-06-13T09:05:55.672Z,1528880755.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:56.072Z,1528880756.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:56.479Z,1528880756.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:56.879Z,1528880756.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:57.279Z,1528880757.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:57.672Z,1528880757.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:58.076Z,1528880758.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:58.476Z,1528880758.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:58.876Z,1528880758.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:59.279Z,1528880759.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:05:59.680Z,1528880759.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:00.068Z,1528880760.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:00.470Z,1528880760.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:00.891Z,1528880760.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:01.270Z,1528880761.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:01.676Z,1528880761.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:02.079Z,1528880762.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:02.475Z,1528880762.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:02.870Z,1528880762.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:03.271Z,1528880763.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:03.667Z,1528880763.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:04.069Z,1528880764.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:04.472Z,1528880764.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:04.876Z,1528880764.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:05.275Z,1528880765.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:05.679Z,1528880765.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:06.067Z,1528880766.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:06.470Z,1528880766.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:06.880Z,1528880766.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:07.271Z,1528880767.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:07.676Z,1528880767.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:08.079Z,1528880768.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:08.475Z,1528880768.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:08.871Z,1528880768.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:09.273Z,1528880769.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:09.668Z,1528880769.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:10.074Z,1528880770.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:10.475Z,1528880770.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:13.608Z,1528880773.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:13.612Z,1528880773.612 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T09:01:13.3Z
2018-06-13T09:06:13.612Z,1528880773.612 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T09:06:13.612Z,1528880773.612 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T09:06:13.803Z,1528880773.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:14.932Z,1528880774.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:15.098Z,1528880775.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:15.492Z,1528880775.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:15.893Z,1528880775.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:16.317Z,1528880776.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:16.719Z,1528880776.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:17.126Z,1528880777.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:20.275Z,1528880780.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:20.374Z,1528880780.374 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0132.lzma
2018-06-13T09:06:20.440Z,1528880780.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:20.832Z,1528880780.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:21.174Z,1528880781.174 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0132.lzma.bak
2018-06-13T09:06:21.174Z,1528880781.174 [DataOverHttps](INFO): SBD MOMSN=8328947
2018-06-13T09:06:21.237Z,1528880781.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:23.179Z,1528880783.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:23.349Z,1528880783.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:23.730Z,1528880783.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:26.834Z,1528880786.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:26.998Z,1528880786.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:27.381Z,1528880787.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:27.792Z,1528880787.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:28.183Z,1528880788.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:28.585Z,1528880788.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:28.981Z,1528880788.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:29.364Z,1528880789.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:29.790Z,1528880789.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:30.189Z,1528880790.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:30.590Z,1528880790.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:30.965Z,1528880790.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:31.371Z,1528880791.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:34.492Z,1528880794.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:34.587Z,1528880794.587 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0133.lzma
2018-06-13T09:06:34.652Z,1528880794.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:35.051Z,1528880795.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:35.386Z,1528880795.386 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0133.lzma.bak
2018-06-13T09:06:35.386Z,1528880795.386 [DataOverHttps](INFO): SBD MOMSN=8328949
2018-06-13T09:06:35.467Z,1528880795.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:37.498Z,1528880797.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:37.501Z,1528880797.501 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T09:06:37.501Z,1528880797.501 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T09:06:37.501Z,1528880797.501 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T09:06:37.651Z,1528880797.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:40.796Z,1528880800.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:40.955Z,1528880800.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:41.349Z,1528880801.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:41.838Z,1528880801.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:42.158Z,1528880802.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:42.611Z,1528880802.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:42.968Z,1528880802.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:43.396Z,1528880803.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:43.765Z,1528880803.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:44.150Z,1528880804.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:44.553Z,1528880804.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:44.940Z,1528880804.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:45.343Z,1528880805.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:45.742Z,1528880805.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:46.137Z,1528880806.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:46.533Z,1528880806.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:46.964Z,1528880806.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:47.363Z,1528880807.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:47.743Z,1528880807.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:48.132Z,1528880808.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:48.531Z,1528880808.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:48.946Z,1528880808.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:49.330Z,1528880809.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:49.740Z,1528880809.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:50.141Z,1528880810.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:50.539Z,1528880810.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:50.936Z,1528880810.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:51.336Z,1528880811.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:51.739Z,1528880811.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:52.136Z,1528880812.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:52.539Z,1528880812.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:52.945Z,1528880812.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:53.348Z,1528880813.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:53.752Z,1528880813.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:54.132Z,1528880814.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:54.536Z,1528880814.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:54.937Z,1528880814.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:55.332Z,1528880815.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:55.748Z,1528880815.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:56.148Z,1528880816.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:56.543Z,1528880816.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:56.942Z,1528880816.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:57.335Z,1528880817.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:57.732Z,1528880817.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:58.135Z,1528880818.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:58.535Z,1528880818.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:58.944Z,1528880818.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:59.352Z,1528880819.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:06:59.756Z,1528880819.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:00.132Z,1528880820.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:00.540Z,1528880820.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:00.940Z,1528880820.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:01.332Z,1528880821.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:01.745Z,1528880821.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:02.156Z,1528880822.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:02.548Z,1528880822.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:02.936Z,1528880822.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:03.336Z,1528880823.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:03.740Z,1528880823.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:04.137Z,1528880824.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:04.540Z,1528880824.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:04.948Z,1528880824.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:05.356Z,1528880825.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:05.750Z,1528880825.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:06.136Z,1528880826.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:06.536Z,1528880826.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:06.944Z,1528880826.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:07.332Z,1528880827.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:07.746Z,1528880827.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:08.156Z,1528880828.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:08.544Z,1528880828.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:08.936Z,1528880828.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:09.349Z,1528880829.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:09.742Z,1528880829.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:10.149Z,1528880830.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:10.546Z,1528880830.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:10.951Z,1528880830.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:11.349Z,1528880831.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:11.754Z,1528880831.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:12.145Z,1528880832.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:12.529Z,1528880832.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:12.929Z,1528880832.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:13.330Z,1528880833.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:13.759Z,1528880833.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:14.158Z,1528880834.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:14.558Z,1528880834.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:14.933Z,1528880834.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:15.332Z,1528880835.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:15.727Z,1528880835.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:16.136Z,1528880836.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:16.531Z,1528880836.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:16.939Z,1528880836.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:17.359Z,1528880837.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:17.741Z,1528880837.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:18.136Z,1528880838.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:18.533Z,1528880838.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:18.935Z,1528880838.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:19.332Z,1528880839.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:19.739Z,1528880839.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:20.144Z,1528880840.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:20.540Z,1528880840.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:20.933Z,1528880840.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:21.336Z,1528880841.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:21.740Z,1528880841.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:22.140Z,1528880842.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:22.534Z,1528880842.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:22.964Z,1528880842.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:23.343Z,1528880843.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:23.739Z,1528880843.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:24.132Z,1528880844.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:24.533Z,1528880844.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:24.936Z,1528880844.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:25.332Z,1528880845.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:25.739Z,1528880845.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:26.143Z,1528880846.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:26.540Z,1528880846.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:26.933Z,1528880846.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:27.336Z,1528880847.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:27.734Z,1528880847.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:28.134Z,1528880848.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:28.536Z,1528880848.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:28.940Z,1528880848.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:29.342Z,1528880849.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:29.748Z,1528880849.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:30.133Z,1528880850.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:30.533Z,1528880850.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:30.934Z,1528880850.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:31.336Z,1528880851.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:31.740Z,1528880851.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:32.144Z,1528880852.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:32.539Z,1528880852.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:32.936Z,1528880852.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:33.334Z,1528880853.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:33.734Z,1528880853.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:34.133Z,1528880854.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:34.534Z,1528880854.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:34.939Z,1528880854.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:35.343Z,1528880855.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:35.743Z,1528880855.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:36.134Z,1528880856.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:36.535Z,1528880856.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:36.935Z,1528880856.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:37.340Z,1528880857.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:37.744Z,1528880857.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:38.141Z,1528880858.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:41.270Z,1528880861.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:41.422Z,1528880861.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:41.824Z,1528880861.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:42.220Z,1528880862.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:42.625Z,1528880862.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:43.029Z,1528880863.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:43.432Z,1528880863.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:43.824Z,1528880863.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:44.230Z,1528880864.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:44.627Z,1528880864.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:45.021Z,1528880865.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:45.404Z,1528880865.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:45.828Z,1528880865.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:46.236Z,1528880866.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:46.630Z,1528880866.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:47.005Z,1528880867.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:47.401Z,1528880867.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:47.805Z,1528880867.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:48.209Z,1528880868.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:48.621Z,1528880868.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:49.040Z,1528880869.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:49.435Z,1528880869.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:49.835Z,1528880869.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:50.208Z,1528880870.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:50.608Z,1528880870.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:51.012Z,1528880871.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:51.409Z,1528880871.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:51.820Z,1528880871.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:52.219Z,1528880872.219 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:52.219Z,1528880872.219 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 114
2018-06-13T09:07:52.219Z,1528880872.219 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:07:52.221Z,1528880872.221 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:52.221Z,1528880872.221 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 114
2018-06-13T09:07:52.221Z,1528880872.221 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:07:52.223Z,1528880872.223 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:52.223Z,1528880872.223 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 114
2018-06-13T09:07:52.223Z,1528880872.223 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:07:52.317Z,1528880872.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:07:52.317Z,1528880872.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:07:52.317Z,1528880872.317 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:07:52.693Z,1528880872.693 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:07:52.693Z,1528880872.693 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 114
2018-06-13T09:07:52.693Z,1528880872.693 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:07:52.694Z,1528880872.694 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 114
2018-06-13T09:07:52.694Z,1528880872.694 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:07:52.694Z,1528880872.694 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 114
2018-06-13T09:07:53.012Z,1528880873.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:07:53.012Z,1528880873.012 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:07:53.012Z,1528880873.012 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:07:53.013Z,1528880873.013 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:07:53.013Z,1528880873.013 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:07:53.014Z,1528880873.014 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:07:53.014Z,1528880873.014 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:07:53.014Z,1528880873.014 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:07:53.015Z,1528880873.015 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:07:53.421Z,1528880873.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:07:53.422Z,1528880873.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:53.811Z,1528880873.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:07:53.812Z,1528880873.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:54.220Z,1528880874.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:07:54.221Z,1528880874.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:54.612Z,1528880874.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:07:54.613Z,1528880874.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:55.021Z,1528880875.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:07:55.022Z,1528880875.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:55.427Z,1528880875.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:07:55.428Z,1528880875.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:55.820Z,1528880875.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:07:55.821Z,1528880875.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:56.224Z,1528880876.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:07:56.225Z,1528880876.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:56.616Z,1528880876.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:07:56.617Z,1528880876.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:57.013Z,1528880877.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:07:57.014Z,1528880877.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:57.420Z,1528880877.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:07:57.421Z,1528880877.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:57.830Z,1528880877.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:07:57.831Z,1528880877.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:58.230Z,1528880878.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:07:58.231Z,1528880878.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:58.631Z,1528880878.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:07:58.632Z,1528880878.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:59.012Z,1528880879.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:07:59.013Z,1528880879.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:59.420Z,1528880879.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:07:59.420Z,1528880879.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:07:59.824Z,1528880879.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:07:59.825Z,1528880879.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:00.220Z,1528880880.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:08:00.221Z,1528880880.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:00.620Z,1528880880.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:08:00.625Z,1528880880.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:01.027Z,1528880881.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:08:01.028Z,1528880881.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:01.426Z,1528880881.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:08:01.427Z,1528880881.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:01.822Z,1528880881.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:08:01.823Z,1528880881.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:02.221Z,1528880882.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:08:02.222Z,1528880882.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:02.619Z,1528880882.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:08:02.620Z,1528880882.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:03.020Z,1528880883.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:08:03.021Z,1528880883.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:03.416Z,1528880883.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:08:03.416Z,1528880883.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:03.818Z,1528880883.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:08:03.819Z,1528880883.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:04.231Z,1528880884.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:08:04.232Z,1528880884.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:04.635Z,1528880884.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:08:04.636Z,1528880884.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:05.019Z,1528880885.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:08:05.020Z,1528880885.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:05.413Z,1528880885.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:08:05.414Z,1528880885.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:05.821Z,1528880885.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:08:05.822Z,1528880885.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:06.215Z,1528880886.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:08:06.216Z,1528880886.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:06.613Z,1528880886.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:08:06.614Z,1528880886.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:07.028Z,1528880887.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:08:07.029Z,1528880887.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:07.432Z,1528880887.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:08:07.433Z,1528880887.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:07.823Z,1528880887.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:08:07.824Z,1528880887.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:08.220Z,1528880888.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:08:08.221Z,1528880888.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:08.619Z,1528880888.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:08:08.620Z,1528880888.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:09.023Z,1528880889.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:08:09.024Z,1528880889.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:09.417Z,1528880889.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:08:09.418Z,1528880889.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:09.822Z,1528880889.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:08:09.823Z,1528880889.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:10.229Z,1528880890.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:08:10.230Z,1528880890.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:10.627Z,1528880890.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:08:10.628Z,1528880890.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:11.018Z,1528880891.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:08:11.019Z,1528880891.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:11.412Z,1528880891.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:08:11.414Z,1528880891.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:11.817Z,1528880891.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:08:11.818Z,1528880891.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:12.214Z,1528880892.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T09:08:12.215Z,1528880892.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:12.614Z,1528880892.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:13.027Z,1528880893.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:13.426Z,1528880893.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:13.821Z,1528880893.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:14.216Z,1528880894.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:14.614Z,1528880894.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:15.013Z,1528880895.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:15.415Z,1528880895.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:15.820Z,1528880895.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:16.231Z,1528880896.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:16.627Z,1528880896.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:17.016Z,1528880897.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:17.424Z,1528880897.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:17.816Z,1528880897.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:18.218Z,1528880898.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:18.612Z,1528880898.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:19.027Z,1528880899.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:19.424Z,1528880899.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:19.822Z,1528880899.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:20.221Z,1528880900.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:20.618Z,1528880900.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:21.022Z,1528880901.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:21.424Z,1528880901.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:21.822Z,1528880901.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:22.226Z,1528880902.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:22.627Z,1528880902.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:23.013Z,1528880903.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:23.412Z,1528880903.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:23.816Z,1528880903.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:24.216Z,1528880904.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:24.612Z,1528880904.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:25.027Z,1528880905.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:25.422Z,1528880905.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:25.822Z,1528880905.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:26.226Z,1528880906.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:26.616Z,1528880906.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:27.014Z,1528880907.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:27.416Z,1528880907.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:27.819Z,1528880907.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:28.230Z,1528880908.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:28.627Z,1528880908.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:29.020Z,1528880909.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:29.413Z,1528880909.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:29.816Z,1528880909.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:30.214Z,1528880910.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:30.612Z,1528880910.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:31.027Z,1528880911.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:31.426Z,1528880911.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:31.822Z,1528880911.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:32.217Z,1528880912.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:32.620Z,1528880912.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:33.023Z,1528880913.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:33.416Z,1528880913.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:33.826Z,1528880913.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:34.226Z,1528880914.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:34.627Z,1528880914.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:35.013Z,1528880915.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:35.412Z,1528880915.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:35.818Z,1528880915.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:36.215Z,1528880916.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:36.613Z,1528880916.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:37.027Z,1528880917.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:37.428Z,1528880917.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:37.827Z,1528880917.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:38.221Z,1528880918.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:38.619Z,1528880918.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:39.018Z,1528880919.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:39.421Z,1528880919.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:42.531Z,1528880922.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:42.692Z,1528880922.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:43.079Z,1528880923.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:43.470Z,1528880923.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:43.871Z,1528880923.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:44.273Z,1528880924.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:44.674Z,1528880924.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:45.075Z,1528880925.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:45.478Z,1528880925.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:45.879Z,1528880925.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:46.273Z,1528880926.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:46.654Z,1528880926.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:47.052Z,1528880927.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:47.460Z,1528880927.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:47.891Z,1528880927.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:48.283Z,1528880928.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:48.668Z,1528880928.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:49.060Z,1528880929.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:49.455Z,1528880929.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:49.858Z,1528880929.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:50.268Z,1528880930.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:50.656Z,1528880930.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:51.063Z,1528880931.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:51.467Z,1528880931.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:51.864Z,1528880931.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:52.259Z,1528880932.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:52.659Z,1528880932.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:53.056Z,1528880933.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:53.459Z,1528880933.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:53.872Z,1528880933.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:54.267Z,1528880934.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:54.668Z,1528880934.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:55.059Z,1528880935.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:55.456Z,1528880935.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:55.864Z,1528880935.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:56.266Z,1528880936.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:56.656Z,1528880936.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:57.072Z,1528880937.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:57.469Z,1528880937.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:57.872Z,1528880937.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:58.270Z,1528880938.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:58.660Z,1528880938.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:59.058Z,1528880939.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:59.460Z,1528880939.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:08:59.876Z,1528880939.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:00.269Z,1528880940.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:00.668Z,1528880940.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:01.065Z,1528880941.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:01.456Z,1528880941.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:01.860Z,1528880941.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:02.264Z,1528880942.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:02.656Z,1528880942.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:03.069Z,1528880943.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:03.468Z,1528880943.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:03.865Z,1528880943.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:04.260Z,1528880944.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:04.660Z,1528880944.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:05.058Z,1528880945.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:05.458Z,1528880945.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:05.871Z,1528880945.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:06.272Z,1528880946.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:06.668Z,1528880946.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:07.063Z,1528880947.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:07.456Z,1528880947.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:07.861Z,1528880947.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:08.262Z,1528880948.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:08.657Z,1528880948.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:09.068Z,1528880949.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:09.468Z,1528880949.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:09.866Z,1528880949.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:10.260Z,1528880950.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:10.663Z,1528880950.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:11.057Z,1528880951.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:11.460Z,1528880951.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:11.870Z,1528880951.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:12.272Z,1528880952.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:12.672Z,1528880952.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:13.060Z,1528880953.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:13.456Z,1528880953.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:13.860Z,1528880953.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:14.261Z,1528880954.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:14.658Z,1528880954.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:15.068Z,1528880955.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:15.469Z,1528880955.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:15.868Z,1528880955.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:16.260Z,1528880956.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:16.661Z,1528880956.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:17.060Z,1528880957.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:17.460Z,1528880957.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:17.873Z,1528880957.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:18.269Z,1528880958.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:18.676Z,1528880958.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:19.064Z,1528880959.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:19.464Z,1528880959.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:19.862Z,1528880959.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:20.265Z,1528880960.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:20.660Z,1528880960.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:21.070Z,1528880961.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:21.474Z,1528880961.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:21.865Z,1528880961.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:22.265Z,1528880962.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:22.665Z,1528880962.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:23.058Z,1528880963.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:23.462Z,1528880963.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:23.873Z,1528880963.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:24.271Z,1528880964.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:24.670Z,1528880964.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:25.062Z,1528880965.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:25.465Z,1528880965.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:25.869Z,1528880965.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:26.274Z,1528880966.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:26.665Z,1528880966.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:27.064Z,1528880967.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:27.463Z,1528880967.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:27.872Z,1528880967.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:28.284Z,1528880968.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:28.674Z,1528880968.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:29.067Z,1528880969.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:29.464Z,1528880969.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:29.870Z,1528880969.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:30.274Z,1528880970.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:30.670Z,1528880970.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:31.064Z,1528880971.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:31.457Z,1528880971.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:31.870Z,1528880971.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:32.274Z,1528880972.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:32.666Z,1528880972.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:33.065Z,1528880973.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:33.462Z,1528880973.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:33.870Z,1528880973.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:34.273Z,1528880974.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:34.681Z,1528880974.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:35.061Z,1528880975.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:35.464Z,1528880975.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:35.874Z,1528880975.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:36.268Z,1528880976.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:36.669Z,1528880976.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:37.064Z,1528880977.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:37.467Z,1528880977.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:37.873Z,1528880977.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:38.276Z,1528880978.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:41.380Z,1528880981.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:41.560Z,1528880981.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:41.932Z,1528880981.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:42.354Z,1528880982.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:42.732Z,1528880982.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:43.167Z,1528880983.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:43.559Z,1528880983.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:43.963Z,1528880983.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:44.335Z,1528880984.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:44.734Z,1528880984.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:45.140Z,1528880985.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:45.535Z,1528880985.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:45.948Z,1528880985.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:46.342Z,1528880986.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:46.742Z,1528880986.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:47.135Z,1528880987.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:47.540Z,1528880987.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:47.938Z,1528880987.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:48.338Z,1528880988.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:48.738Z,1528880988.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:49.143Z,1528880989.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:49.547Z,1528880989.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:49.943Z,1528880989.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:50.337Z,1528880990.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:50.737Z,1528880990.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:51.138Z,1528880991.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:51.540Z,1528880991.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:51.943Z,1528880991.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:52.346Z,1528880992.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:52.752Z,1528880992.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:53.137Z,1528880993.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:53.538Z,1528880993.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:53.938Z,1528880993.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:54.338Z,1528880994.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:54.737Z,1528880994.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:55.152Z,1528880995.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:55.544Z,1528880995.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:55.948Z,1528880995.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:56.335Z,1528880996.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:56.738Z,1528880996.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:57.139Z,1528880997.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:57.539Z,1528880997.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:57.947Z,1528880997.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:58.346Z,1528880998.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:58.747Z,1528880998.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:59.144Z,1528880999.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:59.539Z,1528880999.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:09:59.939Z,1528880999.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:00.340Z,1528881000.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:00.744Z,1528881000.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:01.147Z,1528881001.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:01.547Z,1528881001.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:01.948Z,1528881001.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:02.340Z,1528881002.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:02.738Z,1528881002.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:03.139Z,1528881003.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:03.544Z,1528881003.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:03.948Z,1528881003.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:04.347Z,1528881004.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:04.747Z,1528881004.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:05.144Z,1528881005.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:05.534Z,1528881005.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:05.944Z,1528881005.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:06.340Z,1528881006.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:06.738Z,1528881006.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:07.152Z,1528881007.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:07.548Z,1528881007.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:07.944Z,1528881007.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:08.340Z,1528881008.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:08.731Z,1528881008.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:09.140Z,1528881009.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:09.544Z,1528881009.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:09.945Z,1528881009.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:10.347Z,1528881010.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:10.752Z,1528881010.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:11.131Z,1528881011.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:11.535Z,1528881011.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:11.941Z,1528881011.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:12.340Z,1528881012.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:12.738Z,1528881012.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:13.147Z,1528881013.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:13.548Z,1528881013.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:13.945Z,1528881013.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:14.344Z,1528881014.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:14.733Z,1528881014.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:15.140Z,1528881015.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:15.540Z,1528881015.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:15.947Z,1528881015.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:16.346Z,1528881016.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:16.752Z,1528881016.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:17.131Z,1528881017.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:17.535Z,1528881017.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:17.941Z,1528881017.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:18.340Z,1528881018.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:18.740Z,1528881018.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:19.148Z,1528881019.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:19.548Z,1528881019.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:19.948Z,1528881019.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:20.340Z,1528881020.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:20.735Z,1528881020.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:21.139Z,1528881021.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:21.544Z,1528881021.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:21.948Z,1528881021.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:22.347Z,1528881022.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:22.752Z,1528881022.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:23.135Z,1528881023.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:23.536Z,1528881023.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:23.947Z,1528881023.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:24.348Z,1528881024.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:24.748Z,1528881024.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:25.135Z,1528881025.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:25.535Z,1528881025.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:25.943Z,1528881025.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:26.347Z,1528881026.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:26.743Z,1528881026.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:27.139Z,1528881027.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:27.540Z,1528881027.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:27.944Z,1528881027.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:28.352Z,1528881028.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:28.747Z,1528881028.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:29.135Z,1528881029.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:29.538Z,1528881029.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:29.947Z,1528881029.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:30.348Z,1528881030.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:30.748Z,1528881030.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:31.145Z,1528881031.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:31.534Z,1528881031.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:31.948Z,1528881031.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:32.352Z,1528881032.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:32.743Z,1528881032.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:33.138Z,1528881033.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:33.539Z,1528881033.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:33.946Z,1528881033.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:34.357Z,1528881034.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:34.750Z,1528881034.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:35.137Z,1528881035.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:35.544Z,1528881035.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:35.953Z,1528881035.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:36.348Z,1528881036.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:36.748Z,1528881036.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:37.148Z,1528881037.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:37.536Z,1528881037.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:37.948Z,1528881037.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:38.352Z,1528881038.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:41.456Z,1528881041.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:41.628Z,1528881041.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:42.004Z,1528881042.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:42.404Z,1528881042.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:42.799Z,1528881042.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:43.211Z,1528881043.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:43.607Z,1528881043.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:44.007Z,1528881044.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:44.408Z,1528881044.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:44.799Z,1528881044.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:45.202Z,1528881045.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:45.603Z,1528881045.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:46.008Z,1528881046.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:46.483Z,1528881046.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:46.811Z,1528881046.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:47.199Z,1528881047.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:47.608Z,1528881047.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:48.018Z,1528881048.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:48.400Z,1528881048.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:48.802Z,1528881048.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:49.218Z,1528881049.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:49.620Z,1528881049.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:50.013Z,1528881050.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:50.417Z,1528881050.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:50.802Z,1528881050.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:51.213Z,1528881051.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:51.607Z,1528881051.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:52.015Z,1528881052.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:52.424Z,1528881052.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:52.819Z,1528881052.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:53.210Z,1528881053.210 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:53.210Z,1528881053.210 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 115
2018-06-13T09:10:53.210Z,1528881053.210 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:10:53.212Z,1528881053.212 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:53.212Z,1528881053.212 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 115
2018-06-13T09:10:53.212Z,1528881053.212 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:10:53.218Z,1528881053.218 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:53.218Z,1528881053.218 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 115
2018-06-13T09:10:53.218Z,1528881053.218 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:10:53.297Z,1528881053.297 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:10:53.297Z,1528881053.297 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:10:53.298Z,1528881053.298 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:10:53.685Z,1528881053.685 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:10:53.685Z,1528881053.685 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 115
2018-06-13T09:10:53.686Z,1528881053.686 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:10:53.686Z,1528881053.686 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 115
2018-06-13T09:10:53.686Z,1528881053.686 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:10:53.686Z,1528881053.686 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 115
2018-06-13T09:10:54.012Z,1528881054.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:10:54.012Z,1528881054.012 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:10:54.012Z,1528881054.012 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:10:54.013Z,1528881054.013 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:10:54.013Z,1528881054.013 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:10:54.014Z,1528881054.014 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:10:54.014Z,1528881054.014 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:10:54.014Z,1528881054.014 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:10:54.015Z,1528881054.015 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:10:54.405Z,1528881054.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:10:54.406Z,1528881054.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:54.818Z,1528881054.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:10:54.819Z,1528881054.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:55.235Z,1528881055.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:10:55.236Z,1528881055.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:55.624Z,1528881055.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:10:55.625Z,1528881055.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:56.020Z,1528881056.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:10:56.021Z,1528881056.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:56.459Z,1528881056.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:10:56.460Z,1528881056.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:56.792Z,1528881056.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:10:56.793Z,1528881056.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:57.196Z,1528881057.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:10:57.198Z,1528881057.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:57.600Z,1528881057.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:10:57.601Z,1528881057.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:58.006Z,1528881058.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:10:58.007Z,1528881058.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:58.410Z,1528881058.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:10:58.411Z,1528881058.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:58.811Z,1528881058.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:10:58.812Z,1528881058.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:59.202Z,1528881059.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:10:59.203Z,1528881059.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:10:59.601Z,1528881059.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:10:59.602Z,1528881059.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:00.011Z,1528881060.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:11:00.012Z,1528881060.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:00.412Z,1528881060.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:11:00.413Z,1528881060.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:00.808Z,1528881060.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:11:00.809Z,1528881060.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:01.205Z,1528881061.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:11:01.206Z,1528881061.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:01.608Z,1528881061.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:11:01.609Z,1528881061.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:02.012Z,1528881062.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:11:02.013Z,1528881062.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:02.411Z,1528881062.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:11:02.412Z,1528881062.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:02.807Z,1528881062.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:11:02.808Z,1528881062.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:03.212Z,1528881063.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:11:03.221Z,1528881063.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:03.608Z,1528881063.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:11:03.609Z,1528881063.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:04.013Z,1528881064.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:11:04.014Z,1528881064.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:04.417Z,1528881064.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:11:04.418Z,1528881064.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:04.818Z,1528881064.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:11:04.819Z,1528881064.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:05.209Z,1528881065.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:11:05.210Z,1528881065.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:05.603Z,1528881065.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:11:05.604Z,1528881065.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:06.024Z,1528881066.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:11:06.025Z,1528881066.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:06.414Z,1528881066.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:11:06.415Z,1528881066.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:06.812Z,1528881066.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:11:06.813Z,1528881066.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:07.207Z,1528881067.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:11:07.208Z,1528881067.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:07.603Z,1528881067.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:11:07.604Z,1528881067.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:08.013Z,1528881068.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:11:08.014Z,1528881068.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:08.419Z,1528881068.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:11:08.420Z,1528881068.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:08.810Z,1528881068.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:11:08.811Z,1528881068.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:09.216Z,1528881069.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:11:09.217Z,1528881069.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:09.616Z,1528881069.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:11:09.617Z,1528881069.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:10.009Z,1528881070.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:11:10.010Z,1528881070.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:10.424Z,1528881070.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:11:10.426Z,1528881070.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:10.824Z,1528881070.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:11:10.825Z,1528881070.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:11.206Z,1528881071.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:11:11.207Z,1528881071.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:11.603Z,1528881071.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:11:11.604Z,1528881071.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:12.024Z,1528881072.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:11:12.025Z,1528881072.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:12.411Z,1528881072.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:11:12.412Z,1528881072.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:12.812Z,1528881072.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:11:12.814Z,1528881072.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:13.215Z,1528881073.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:13.609Z,1528881073.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:14.014Z,1528881074.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:14.416Z,1528881074.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:14.811Z,1528881074.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:15.216Z,1528881075.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:15.619Z,1528881075.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:16.014Z,1528881076.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:16.416Z,1528881076.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:16.824Z,1528881076.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:17.208Z,1528881077.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:17.614Z,1528881077.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:18.024Z,1528881078.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:18.418Z,1528881078.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:18.811Z,1528881078.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:19.216Z,1528881079.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:19.616Z,1528881079.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:20.020Z,1528881080.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:20.424Z,1528881080.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:20.816Z,1528881080.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:21.217Z,1528881081.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:21.596Z,1528881081.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:22.023Z,1528881082.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:22.419Z,1528881082.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:22.822Z,1528881082.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:23.198Z,1528881083.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:23.600Z,1528881083.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:24.020Z,1528881084.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:24.428Z,1528881084.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:24.819Z,1528881084.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:25.200Z,1528881085.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:25.596Z,1528881085.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:26.026Z,1528881086.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:26.426Z,1528881086.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:26.827Z,1528881086.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:27.201Z,1528881087.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:27.616Z,1528881087.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:28.029Z,1528881088.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:28.428Z,1528881088.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:28.828Z,1528881088.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:29.204Z,1528881089.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:29.604Z,1528881089.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:30.011Z,1528881090.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:30.407Z,1528881090.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:30.807Z,1528881090.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:31.212Z,1528881091.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:31.600Z,1528881091.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:32.007Z,1528881092.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:32.411Z,1528881092.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:32.808Z,1528881092.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:33.208Z,1528881093.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:33.603Z,1528881093.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:34.008Z,1528881094.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:34.416Z,1528881094.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:34.811Z,1528881094.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:35.204Z,1528881095.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:35.602Z,1528881095.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:36.013Z,1528881096.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:36.433Z,1528881096.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:36.807Z,1528881096.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:37.204Z,1528881097.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:37.599Z,1528881097.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:38.015Z,1528881098.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:38.038Z,1528881098.038 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T09:11:38.038Z,1528881098.038 [Default:CheckIn:C.Wait] Stopped
2018-06-13T09:11:38.038Z,1528881098.038 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T09:11:38.038Z,1528881098.038 [Default:CheckIn:D] Running Loop=1
2018-06-13T09:11:38.416Z,1528881098.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:38.419Z,1528881098.419 [Default:CheckIn:D] Stopped
2018-06-13T09:11:38.420Z,1528881098.420 [Default:CheckIn:E] Running Loop=1
2018-06-13T09:11:41.520Z,1528881101.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:41.523Z,1528881101.523 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 344.416243 min 
2018-06-13T09:11:41.523Z,1528881101.523 [Default:CheckIn:E] Stopped
2018-06-13T09:11:41.523Z,1528881101.523 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T09:11:41.524Z,1528881101.524 [Default:CheckIn] Stopped
2018-06-13T09:11:41.524Z,1528881101.524 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T09:11:41.524Z,1528881101.524 [Default:CheckIn](INFO): Running loop #34
2018-06-13T09:11:41.524Z,1528881101.524 [Default:CheckIn] Running Loop=34
2018-06-13T09:11:41.524Z,1528881101.524 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T09:11:41.524Z,1528881101.524 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T09:11:41.676Z,1528881101.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:42.080Z,1528881102.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:42.477Z,1528881102.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:42.872Z,1528881102.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:43.282Z,1528881103.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:43.679Z,1528881103.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:44.083Z,1528881104.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:44.475Z,1528881104.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:44.871Z,1528881104.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:45.277Z,1528881105.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:45.671Z,1528881105.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:46.080Z,1528881106.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:46.489Z,1528881106.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:46.888Z,1528881106.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:47.276Z,1528881107.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:47.680Z,1528881107.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:48.081Z,1528881108.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:48.484Z,1528881108.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:48.883Z,1528881108.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:49.272Z,1528881109.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:49.672Z,1528881109.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:50.083Z,1528881110.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:50.484Z,1528881110.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:50.883Z,1528881110.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:51.275Z,1528881111.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:51.676Z,1528881111.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:52.083Z,1528881112.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:52.483Z,1528881112.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:52.888Z,1528881112.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:53.275Z,1528881113.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:53.674Z,1528881113.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:54.081Z,1528881114.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:54.483Z,1528881114.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:54.883Z,1528881114.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:55.271Z,1528881115.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:55.674Z,1528881115.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:56.084Z,1528881116.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:56.484Z,1528881116.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:56.883Z,1528881116.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:57.275Z,1528881117.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:57.676Z,1528881117.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:58.087Z,1528881118.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:58.483Z,1528881118.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:58.888Z,1528881118.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:59.275Z,1528881119.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:11:59.672Z,1528881119.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:00.084Z,1528881120.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:00.483Z,1528881120.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:00.880Z,1528881120.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:01.276Z,1528881121.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:01.680Z,1528881121.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:02.080Z,1528881122.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:02.482Z,1528881122.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:02.880Z,1528881122.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:03.275Z,1528881123.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:03.676Z,1528881123.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:04.080Z,1528881124.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:04.483Z,1528881124.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:04.884Z,1528881124.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:05.275Z,1528881125.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:05.675Z,1528881125.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:06.088Z,1528881126.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:06.487Z,1528881126.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:06.883Z,1528881126.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:07.281Z,1528881127.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:07.674Z,1528881127.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:08.083Z,1528881128.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:08.486Z,1528881128.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:08.888Z,1528881128.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:09.276Z,1528881129.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:09.677Z,1528881129.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:10.088Z,1528881130.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:10.488Z,1528881130.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:10.884Z,1528881130.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:11.276Z,1528881131.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:11.675Z,1528881131.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:12.084Z,1528881132.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:12.489Z,1528881132.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:12.883Z,1528881132.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:13.284Z,1528881133.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:13.675Z,1528881133.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:14.084Z,1528881134.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:14.489Z,1528881134.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:14.884Z,1528881134.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:15.278Z,1528881135.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:15.680Z,1528881135.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:16.082Z,1528881136.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:16.492Z,1528881136.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:16.892Z,1528881136.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:17.276Z,1528881137.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:17.675Z,1528881137.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:18.096Z,1528881138.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:18.485Z,1528881138.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:18.885Z,1528881138.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:19.280Z,1528881139.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:19.674Z,1528881139.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:20.092Z,1528881140.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:20.489Z,1528881140.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:20.883Z,1528881140.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:21.276Z,1528881141.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:21.690Z,1528881141.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:22.082Z,1528881142.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:22.489Z,1528881142.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:22.890Z,1528881142.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:23.272Z,1528881143.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:23.684Z,1528881143.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:24.091Z,1528881144.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:24.485Z,1528881144.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:24.889Z,1528881144.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:25.289Z,1528881145.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:25.686Z,1528881145.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:26.076Z,1528881146.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:26.486Z,1528881146.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:26.883Z,1528881146.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:27.286Z,1528881147.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:27.689Z,1528881147.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:28.083Z,1528881148.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:28.482Z,1528881148.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:28.891Z,1528881148.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:29.289Z,1528881149.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:29.686Z,1528881149.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:30.069Z,1528881150.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:30.495Z,1528881150.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:30.899Z,1528881150.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:31.311Z,1528881151.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:31.670Z,1528881151.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:32.071Z,1528881152.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:32.480Z,1528881152.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:32.871Z,1528881152.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:33.279Z,1528881153.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:33.707Z,1528881153.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:34.079Z,1528881154.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:34.475Z,1528881154.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:34.875Z,1528881154.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:35.272Z,1528881155.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:35.673Z,1528881155.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:36.075Z,1528881156.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:36.484Z,1528881156.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:36.882Z,1528881156.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:37.283Z,1528881157.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:37.672Z,1528881157.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:38.075Z,1528881158.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:38.476Z,1528881158.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:41.581Z,1528881161.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:41.764Z,1528881161.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:42.162Z,1528881162.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:42.568Z,1528881162.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:42.956Z,1528881162.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:43.338Z,1528881163.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:43.744Z,1528881163.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:44.168Z,1528881164.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:44.570Z,1528881164.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:44.967Z,1528881164.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:45.344Z,1528881165.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:45.740Z,1528881165.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:46.147Z,1528881166.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:46.568Z,1528881166.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:46.970Z,1528881166.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:47.337Z,1528881167.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:47.739Z,1528881167.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:48.170Z,1528881168.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:48.547Z,1528881168.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:48.947Z,1528881168.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:49.349Z,1528881169.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:49.739Z,1528881169.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:50.147Z,1528881170.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:50.575Z,1528881170.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:50.944Z,1528881170.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:51.342Z,1528881171.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:51.743Z,1528881171.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:52.144Z,1528881172.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:52.572Z,1528881172.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:52.956Z,1528881172.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:53.343Z,1528881173.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:53.743Z,1528881173.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:54.156Z,1528881174.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:54.556Z,1528881174.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:54.952Z,1528881174.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:55.344Z,1528881175.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:55.740Z,1528881175.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:56.152Z,1528881176.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:56.556Z,1528881176.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:56.948Z,1528881176.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:57.344Z,1528881177.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:57.753Z,1528881177.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:58.160Z,1528881178.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:58.556Z,1528881178.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:58.955Z,1528881178.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:59.344Z,1528881179.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:12:59.744Z,1528881179.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:00.177Z,1528881180.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:00.560Z,1528881180.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:00.957Z,1528881180.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:01.348Z,1528881181.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:01.742Z,1528881181.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:02.156Z,1528881182.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:02.555Z,1528881182.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:02.956Z,1528881182.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:03.348Z,1528881183.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:03.748Z,1528881183.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:04.156Z,1528881184.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:04.556Z,1528881184.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:04.957Z,1528881184.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:05.344Z,1528881185.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:05.746Z,1528881185.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:06.160Z,1528881186.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:06.554Z,1528881186.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:06.953Z,1528881186.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:07.348Z,1528881187.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:07.743Z,1528881187.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:08.144Z,1528881188.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:08.561Z,1528881188.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:08.960Z,1528881188.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:09.360Z,1528881189.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:09.745Z,1528881189.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:10.144Z,1528881190.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:10.560Z,1528881190.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:10.948Z,1528881190.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:11.356Z,1528881191.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:11.756Z,1528881191.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:12.160Z,1528881192.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:12.548Z,1528881192.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:12.944Z,1528881192.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:13.360Z,1528881193.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:13.750Z,1528881193.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:14.150Z,1528881194.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:14.559Z,1528881194.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:14.956Z,1528881194.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:15.357Z,1528881195.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:15.752Z,1528881195.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:16.132Z,1528881196.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:16.558Z,1528881196.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:16.936Z,1528881196.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:17.360Z,1528881197.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:17.764Z,1528881197.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:18.166Z,1528881198.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:18.544Z,1528881198.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:18.939Z,1528881198.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:19.341Z,1528881199.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:19.740Z,1528881199.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:20.144Z,1528881200.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:20.567Z,1528881200.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:20.951Z,1528881200.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:21.351Z,1528881201.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:21.743Z,1528881201.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:22.141Z,1528881202.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:22.541Z,1528881202.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:22.943Z,1528881202.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:23.348Z,1528881203.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:23.751Z,1528881203.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:24.152Z,1528881204.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:24.539Z,1528881204.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:24.941Z,1528881204.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:25.342Z,1528881205.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:25.739Z,1528881205.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:26.142Z,1528881206.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:26.551Z,1528881206.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:26.952Z,1528881206.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:27.347Z,1528881207.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:27.744Z,1528881207.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:28.139Z,1528881208.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:28.542Z,1528881208.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:28.943Z,1528881208.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:29.348Z,1528881209.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:29.751Z,1528881209.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:30.151Z,1528881210.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:30.539Z,1528881210.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:30.941Z,1528881210.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:31.343Z,1528881211.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:31.741Z,1528881211.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:32.141Z,1528881212.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:32.551Z,1528881212.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:32.947Z,1528881212.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:33.347Z,1528881213.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:33.744Z,1528881213.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:34.141Z,1528881214.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:34.542Z,1528881214.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:34.942Z,1528881214.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:35.348Z,1528881215.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:35.751Z,1528881215.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:36.151Z,1528881216.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:36.539Z,1528881216.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:36.941Z,1528881216.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:37.343Z,1528881217.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:37.739Z,1528881217.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:38.148Z,1528881218.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:38.556Z,1528881218.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:41.680Z,1528881221.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:41.838Z,1528881221.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:42.231Z,1528881222.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:42.628Z,1528881222.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:43.034Z,1528881223.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:43.435Z,1528881223.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:43.836Z,1528881223.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:44.236Z,1528881224.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:44.633Z,1528881224.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:45.030Z,1528881225.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:45.430Z,1528881225.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:45.828Z,1528881225.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:46.238Z,1528881226.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:46.636Z,1528881226.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:47.039Z,1528881227.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:47.414Z,1528881227.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:47.821Z,1528881227.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:48.228Z,1528881228.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:48.624Z,1528881228.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:49.052Z,1528881229.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:49.434Z,1528881229.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:49.831Z,1528881229.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:50.228Z,1528881230.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:50.636Z,1528881230.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:51.029Z,1528881231.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:51.425Z,1528881231.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:51.820Z,1528881231.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:52.232Z,1528881232.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:52.636Z,1528881232.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:53.036Z,1528881233.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:53.426Z,1528881233.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:53.821Z,1528881233.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:54.230Z,1528881234.230 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:54.231Z,1528881234.231 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 116
2018-06-13T09:13:54.231Z,1528881234.231 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:13:54.232Z,1528881234.232 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:54.232Z,1528881234.232 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 116
2018-06-13T09:13:54.233Z,1528881234.233 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:13:54.234Z,1528881234.234 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:54.235Z,1528881234.235 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 116
2018-06-13T09:13:54.235Z,1528881234.235 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:13:54.329Z,1528881234.329 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:13:54.329Z,1528881234.329 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:13:54.330Z,1528881234.330 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:13:54.721Z,1528881234.721 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:13:54.721Z,1528881234.721 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 116
2018-06-13T09:13:54.722Z,1528881234.722 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:13:54.722Z,1528881234.722 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 116
2018-06-13T09:13:54.722Z,1528881234.722 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:13:54.722Z,1528881234.722 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 116
2018-06-13T09:13:55.028Z,1528881235.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:13:55.028Z,1528881235.028 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:13:55.029Z,1528881235.029 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:13:55.029Z,1528881235.029 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:13:55.030Z,1528881235.030 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:13:55.030Z,1528881235.030 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:13:55.030Z,1528881235.030 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:13:55.031Z,1528881235.031 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:13:55.031Z,1528881235.031 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:13:55.424Z,1528881235.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:13:55.425Z,1528881235.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:55.822Z,1528881235.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:13:55.823Z,1528881235.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:56.227Z,1528881236.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:13:56.228Z,1528881236.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:56.634Z,1528881236.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:13:56.635Z,1528881236.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:57.033Z,1528881237.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:13:57.034Z,1528881237.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:57.430Z,1528881237.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:13:57.431Z,1528881237.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:57.823Z,1528881237.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:13:57.824Z,1528881237.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:58.231Z,1528881238.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:13:58.232Z,1528881238.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:58.631Z,1528881238.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:13:58.632Z,1528881238.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:59.020Z,1528881239.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:13:59.021Z,1528881239.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:59.427Z,1528881239.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:13:59.428Z,1528881239.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:13:59.840Z,1528881239.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:13:59.841Z,1528881239.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:00.239Z,1528881240.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:14:00.240Z,1528881240.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:00.624Z,1528881240.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:14:00.625Z,1528881240.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:01.028Z,1528881241.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:14:01.029Z,1528881241.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:01.428Z,1528881241.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:14:01.429Z,1528881241.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:01.826Z,1528881241.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:14:01.827Z,1528881241.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:02.229Z,1528881242.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:14:02.230Z,1528881242.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:02.634Z,1528881242.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:14:02.635Z,1528881242.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:03.033Z,1528881243.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:14:03.034Z,1528881243.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:03.436Z,1528881243.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:14:03.437Z,1528881243.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:03.823Z,1528881243.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:14:03.824Z,1528881243.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:04.233Z,1528881244.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:14:04.234Z,1528881244.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:04.622Z,1528881244.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:14:04.623Z,1528881244.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:05.024Z,1528881245.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:14:05.025Z,1528881245.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:05.425Z,1528881245.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:14:05.426Z,1528881245.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:05.840Z,1528881245.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:14:05.841Z,1528881245.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:06.234Z,1528881246.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:14:06.235Z,1528881246.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:06.632Z,1528881246.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:14:06.633Z,1528881246.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:07.031Z,1528881247.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:14:07.032Z,1528881247.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:07.423Z,1528881247.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:14:07.424Z,1528881247.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:07.827Z,1528881247.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:14:07.828Z,1528881247.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:08.224Z,1528881248.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:14:08.226Z,1528881248.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:08.634Z,1528881248.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:14:08.635Z,1528881248.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:09.036Z,1528881249.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:14:09.037Z,1528881249.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:09.436Z,1528881249.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:14:09.437Z,1528881249.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:09.824Z,1528881249.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:14:09.825Z,1528881249.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:10.226Z,1528881250.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:14:10.227Z,1528881250.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:10.630Z,1528881250.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:14:10.631Z,1528881250.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:11.022Z,1528881251.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:14:11.023Z,1528881251.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:11.522Z,1528881251.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T09:14:11.523Z,1528881251.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:11.833Z,1528881251.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:14:11.834Z,1528881251.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:12.234Z,1528881252.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:14:12.235Z,1528881252.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:12.622Z,1528881252.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:14:12.623Z,1528881252.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:13.026Z,1528881253.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:14:13.027Z,1528881253.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:13.431Z,1528881253.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:14:13.432Z,1528881253.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:13.821Z,1528881253.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:14:13.822Z,1528881253.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:14.230Z,1528881254.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T09:14:14.231Z,1528881254.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:14.635Z,1528881254.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:15.032Z,1528881255.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:15.430Z,1528881255.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:15.822Z,1528881255.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:16.227Z,1528881256.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:16.622Z,1528881256.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:17.022Z,1528881257.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:17.434Z,1528881257.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:17.840Z,1528881257.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:18.237Z,1528881258.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:18.632Z,1528881258.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:19.031Z,1528881259.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:19.419Z,1528881259.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:19.828Z,1528881259.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:20.231Z,1528881260.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:20.634Z,1528881260.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:21.036Z,1528881261.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:21.434Z,1528881261.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:21.822Z,1528881261.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:22.218Z,1528881262.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:22.622Z,1528881262.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:23.028Z,1528881263.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:23.441Z,1528881263.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:23.836Z,1528881263.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:24.237Z,1528881264.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:24.628Z,1528881264.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:25.026Z,1528881265.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:25.424Z,1528881265.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:25.828Z,1528881265.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:26.228Z,1528881266.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:26.636Z,1528881266.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:27.030Z,1528881267.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:27.434Z,1528881267.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:27.824Z,1528881267.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:28.231Z,1528881268.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:28.630Z,1528881268.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:29.024Z,1528881269.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:29.431Z,1528881269.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:29.835Z,1528881269.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:30.236Z,1528881270.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:30.631Z,1528881270.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:31.032Z,1528881271.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:31.429Z,1528881271.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:31.818Z,1528881271.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:32.236Z,1528881272.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:32.639Z,1528881272.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:33.037Z,1528881273.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:33.437Z,1528881273.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:33.833Z,1528881273.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:34.230Z,1528881274.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:34.630Z,1528881274.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:35.035Z,1528881275.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:35.432Z,1528881275.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:35.840Z,1528881275.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:36.239Z,1528881276.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:36.632Z,1528881276.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:37.036Z,1528881277.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:37.417Z,1528881277.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:37.844Z,1528881277.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:38.221Z,1528881278.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:38.651Z,1528881278.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:41.753Z,1528881281.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:41.907Z,1528881281.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:42.299Z,1528881282.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:42.696Z,1528881282.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:43.096Z,1528881283.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:43.516Z,1528881283.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:43.907Z,1528881283.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:44.310Z,1528881284.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:44.686Z,1528881284.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:45.083Z,1528881285.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:45.488Z,1528881285.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:45.886Z,1528881285.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:46.284Z,1528881286.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:46.716Z,1528881286.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:47.111Z,1528881287.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:47.495Z,1528881287.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:47.884Z,1528881287.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:48.284Z,1528881288.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:48.683Z,1528881288.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:49.083Z,1528881289.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:49.495Z,1528881289.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:49.891Z,1528881289.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:50.291Z,1528881290.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:50.688Z,1528881290.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:51.083Z,1528881291.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:51.486Z,1528881291.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:51.900Z,1528881291.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:52.284Z,1528881292.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:52.700Z,1528881292.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:53.100Z,1528881293.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:53.494Z,1528881293.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:53.888Z,1528881293.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:54.291Z,1528881294.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:54.685Z,1528881294.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:55.086Z,1528881295.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:55.502Z,1528881295.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:55.896Z,1528881295.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:56.300Z,1528881296.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:56.691Z,1528881296.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:57.084Z,1528881297.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:57.492Z,1528881297.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:57.889Z,1528881297.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:58.292Z,1528881298.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:58.700Z,1528881298.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:59.101Z,1528881299.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:59.495Z,1528881299.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:14:59.888Z,1528881299.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:00.294Z,1528881300.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:00.685Z,1528881300.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:01.086Z,1528881301.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:01.500Z,1528881301.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:01.896Z,1528881301.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:02.297Z,1528881302.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:02.701Z,1528881302.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:03.088Z,1528881303.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:03.488Z,1528881303.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:03.892Z,1528881303.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:04.295Z,1528881304.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:04.697Z,1528881304.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:05.102Z,1528881305.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:05.500Z,1528881305.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:05.888Z,1528881305.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:06.292Z,1528881306.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:06.689Z,1528881306.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:07.089Z,1528881307.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:07.502Z,1528881307.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:07.896Z,1528881307.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:08.296Z,1528881308.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:08.698Z,1528881308.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:09.095Z,1528881309.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:09.494Z,1528881309.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:09.900Z,1528881309.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:10.288Z,1528881310.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:10.698Z,1528881310.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:11.103Z,1528881311.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:11.503Z,1528881311.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:11.896Z,1528881311.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:12.305Z,1528881312.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:12.682Z,1528881312.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:13.084Z,1528881313.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:13.510Z,1528881313.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:13.909Z,1528881313.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:14.310Z,1528881314.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:14.706Z,1528881314.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:15.092Z,1528881315.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:15.484Z,1528881315.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:15.885Z,1528881315.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:16.287Z,1528881316.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:16.695Z,1528881316.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:17.096Z,1528881317.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:17.491Z,1528881317.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:17.892Z,1528881317.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:18.288Z,1528881318.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:18.683Z,1528881318.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:19.092Z,1528881319.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:19.517Z,1528881319.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:19.916Z,1528881319.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:20.291Z,1528881320.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:20.689Z,1528881320.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:21.090Z,1528881321.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:21.492Z,1528881321.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:21.894Z,1528881321.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:22.292Z,1528881322.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:22.700Z,1528881322.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:23.101Z,1528881323.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:23.498Z,1528881323.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:23.888Z,1528881323.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:24.291Z,1528881324.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:24.688Z,1528881324.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:25.088Z,1528881325.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:25.502Z,1528881325.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:25.898Z,1528881325.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:26.304Z,1528881326.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:26.692Z,1528881326.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:27.086Z,1528881327.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:27.489Z,1528881327.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:27.891Z,1528881327.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:28.288Z,1528881328.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:28.696Z,1528881328.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:29.103Z,1528881329.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:29.495Z,1528881329.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:29.890Z,1528881329.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:30.292Z,1528881330.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:30.690Z,1528881330.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:31.091Z,1528881331.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:31.508Z,1528881331.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:31.904Z,1528881331.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:32.304Z,1528881332.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:32.694Z,1528881332.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:33.090Z,1528881333.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:33.490Z,1528881333.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:33.897Z,1528881333.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:34.286Z,1528881334.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:34.699Z,1528881334.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:35.101Z,1528881335.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:35.504Z,1528881335.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:35.889Z,1528881335.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:36.291Z,1528881336.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:36.687Z,1528881336.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:37.091Z,1528881337.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:37.512Z,1528881337.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:37.898Z,1528881337.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:38.304Z,1528881338.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:38.696Z,1528881338.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:41.809Z,1528881341.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:41.989Z,1528881341.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:42.391Z,1528881342.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:42.787Z,1528881342.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:43.184Z,1528881343.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:43.582Z,1528881343.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:43.961Z,1528881343.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:44.384Z,1528881344.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:44.789Z,1528881344.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:45.188Z,1528881345.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:45.594Z,1528881345.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:45.965Z,1528881345.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:46.363Z,1528881346.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:46.772Z,1528881346.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:47.168Z,1528881347.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:47.575Z,1528881347.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:47.995Z,1528881347.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:48.402Z,1528881348.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:48.768Z,1528881348.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:49.167Z,1528881349.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:49.568Z,1528881349.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:50.001Z,1528881350.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:50.367Z,1528881350.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:50.779Z,1528881350.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:51.175Z,1528881351.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:51.575Z,1528881351.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:51.971Z,1528881351.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:52.376Z,1528881352.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:52.772Z,1528881352.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:53.171Z,1528881353.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:53.576Z,1528881353.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:53.979Z,1528881353.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:54.379Z,1528881354.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:54.769Z,1528881354.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:55.170Z,1528881355.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:55.572Z,1528881355.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:55.967Z,1528881355.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:56.370Z,1528881356.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:56.731Z,1528881356.731 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T09:15:56.731Z,1528881356.731 [NAL9602] Data Fault, FailCount= 2
2018-06-13T09:15:56.731Z,1528881356.731 [NAL9602](ERROR): Data Fault
2018-06-13T09:15:56.787Z,1528881356.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:56.881Z,1528881356.881 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T09:15:57.126Z,1528881357.126 [NAL9602](INFO): Powering down
2018-06-13T09:15:57.173Z,1528881357.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:57.572Z,1528881357.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:57.971Z,1528881357.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:58.045Z,1528881358.045 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T09:15:58.045Z,1528881358.045 [NAL9602] No Fault, FailCount= 2
2018-06-13T09:15:58.371Z,1528881358.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:58.771Z,1528881358.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:59.198Z,1528881359.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:59.571Z,1528881359.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:15:59.976Z,1528881359.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:00.370Z,1528881360.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:00.768Z,1528881360.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:01.171Z,1528881361.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:01.571Z,1528881361.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:01.968Z,1528881361.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:02.376Z,1528881362.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:02.769Z,1528881362.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:03.168Z,1528881363.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:03.571Z,1528881363.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:03.969Z,1528881363.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:04.371Z,1528881364.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:04.772Z,1528881364.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:05.169Z,1528881365.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:05.570Z,1528881365.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:05.974Z,1528881365.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:06.376Z,1528881366.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:06.771Z,1528881366.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:07.173Z,1528881367.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:07.570Z,1528881367.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:07.970Z,1528881367.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:08.372Z,1528881368.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:08.776Z,1528881368.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:09.171Z,1528881369.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:09.573Z,1528881369.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:09.970Z,1528881369.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:10.366Z,1528881370.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:10.775Z,1528881370.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:11.170Z,1528881371.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:11.570Z,1528881371.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:11.975Z,1528881371.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:12.370Z,1528881372.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:12.770Z,1528881372.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:13.171Z,1528881373.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:13.569Z,1528881373.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:13.974Z,1528881373.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:14.380Z,1528881374.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:14.769Z,1528881374.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:15.170Z,1528881375.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:15.572Z,1528881375.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:15.970Z,1528881375.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:16.370Z,1528881376.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:16.768Z,1528881376.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:17.172Z,1528881377.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:17.574Z,1528881377.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:17.973Z,1528881377.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:18.370Z,1528881378.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:18.773Z,1528881378.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:19.171Z,1528881379.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:19.574Z,1528881379.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:19.972Z,1528881379.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:20.372Z,1528881380.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:20.772Z,1528881380.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:21.176Z,1528881381.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:21.571Z,1528881381.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:21.972Z,1528881381.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:22.371Z,1528881382.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:22.774Z,1528881382.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:23.177Z,1528881383.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:23.580Z,1528881383.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:23.972Z,1528881383.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:24.373Z,1528881384.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:24.771Z,1528881384.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:25.173Z,1528881385.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:25.569Z,1528881385.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:25.974Z,1528881385.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:26.387Z,1528881386.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:26.773Z,1528881386.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:27.182Z,1528881387.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:27.535Z,1528881387.535 [NAL9602](INFO): Powering up NAL9602
2018-06-13T09:16:27.581Z,1528881387.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:27.969Z,1528881387.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:28.375Z,1528881388.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:28.772Z,1528881388.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:29.180Z,1528881389.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:29.575Z,1528881389.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:29.978Z,1528881389.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:30.371Z,1528881390.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:30.773Z,1528881390.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:31.174Z,1528881391.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:31.572Z,1528881391.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:31.992Z,1528881391.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:32.373Z,1528881392.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:32.771Z,1528881392.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:33.179Z,1528881393.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:33.575Z,1528881393.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:33.970Z,1528881393.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:34.376Z,1528881394.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:34.776Z,1528881394.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:35.184Z,1528881395.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:35.573Z,1528881395.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:35.988Z,1528881395.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:36.385Z,1528881396.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:36.792Z,1528881396.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:37.182Z,1528881397.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:37.579Z,1528881397.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:37.976Z,1528881397.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:38.390Z,1528881398.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:38.734Z,1528881398.734 [NAL9602](INFO): NAL9602 initialized
2018-06-13T09:16:38.785Z,1528881398.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:41.891Z,1528881401.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:41.894Z,1528881401.894 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T09:11:41.5Z
2018-06-13T09:16:41.894Z,1528881401.894 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T09:16:41.894Z,1528881401.894 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T09:16:42.052Z,1528881402.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:43.195Z,1528881403.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:43.376Z,1528881403.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:43.749Z,1528881403.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:44.162Z,1528881404.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:47.301Z,1528881407.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:47.402Z,1528881407.402 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0136.lzma
2018-06-13T09:16:47.479Z,1528881407.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:47.859Z,1528881407.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:48.202Z,1528881408.202 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0136.lzma.bak
2018-06-13T09:16:48.203Z,1528881408.203 [DataOverHttps](INFO): SBD MOMSN=8328961
2018-06-13T09:16:48.279Z,1528881408.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:50.159Z,1528881410.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:50.343Z,1528881410.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:50.733Z,1528881410.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:51.137Z,1528881411.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:51.537Z,1528881411.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:51.936Z,1528881411.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:52.344Z,1528881412.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:52.727Z,1528881412.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:53.150Z,1528881413.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:53.519Z,1528881413.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:53.922Z,1528881413.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:54.319Z,1528881414.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:54.723Z,1528881414.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:57.832Z,1528881417.832 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:57.832Z,1528881417.832 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 117
2018-06-13T09:16:57.832Z,1528881417.832 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:16:57.834Z,1528881417.834 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:57.834Z,1528881417.834 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 117
2018-06-13T09:16:57.834Z,1528881417.834 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:16:57.836Z,1528881417.836 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:57.836Z,1528881417.836 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 117
2018-06-13T09:16:57.836Z,1528881417.836 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:16:57.929Z,1528881417.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:16:57.929Z,1528881417.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:16:57.930Z,1528881417.930 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:16:58.081Z,1528881418.081 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:16:58.081Z,1528881418.081 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 117
2018-06-13T09:16:58.082Z,1528881418.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:16:58.082Z,1528881418.082 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 117
2018-06-13T09:16:58.082Z,1528881418.082 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:16:58.082Z,1528881418.082 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 117
2018-06-13T09:16:58.416Z,1528881418.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:16:58.417Z,1528881418.417 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:16:58.417Z,1528881418.417 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:16:58.417Z,1528881418.417 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:16:58.418Z,1528881418.418 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:16:58.418Z,1528881418.418 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:16:58.418Z,1528881418.418 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:16:58.419Z,1528881418.419 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:16:58.419Z,1528881418.419 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:16:58.819Z,1528881418.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T09:16:58.820Z,1528881418.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:59.188Z,1528881419.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T09:16:59.190Z,1528881419.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:59.592Z,1528881419.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T09:16:59.593Z,1528881419.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:16:59.989Z,1528881419.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T09:16:59.990Z,1528881419.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:00.415Z,1528881420.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T09:17:00.416Z,1528881420.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:00.799Z,1528881420.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T09:17:00.800Z,1528881420.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:03.923Z,1528881423.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T09:17:03.923Z,1528881423.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:04.020Z,1528881424.020 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0137.lzma
2018-06-13T09:17:04.080Z,1528881424.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T09:17:04.085Z,1528881424.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:04.469Z,1528881424.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T09:17:04.470Z,1528881424.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:04.818Z,1528881424.818 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0137.lzma.bak
2018-06-13T09:17:04.818Z,1528881424.818 [DataOverHttps](INFO): SBD MOMSN=8328963
2018-06-13T09:17:04.889Z,1528881424.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T09:17:04.890Z,1528881424.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:06.788Z,1528881426.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T09:17:06.789Z,1528881426.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:06.792Z,1528881426.792 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T09:17:06.792Z,1528881426.792 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T09:17:06.792Z,1528881426.792 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T09:17:06.951Z,1528881426.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T09:17:06.952Z,1528881426.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:07.344Z,1528881427.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T09:17:07.345Z,1528881427.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:10.464Z,1528881430.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T09:17:10.465Z,1528881430.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:10.651Z,1528881430.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:17:10.652Z,1528881430.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:11.046Z,1528881431.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:17:11.047Z,1528881431.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:11.454Z,1528881431.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:17:11.455Z,1528881431.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:11.844Z,1528881431.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:17:11.845Z,1528881431.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:12.242Z,1528881432.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:17:12.243Z,1528881432.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:12.642Z,1528881432.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:17:12.642Z,1528881432.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:13.033Z,1528881433.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:17:13.034Z,1528881433.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:13.452Z,1528881433.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:17:13.453Z,1528881433.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:13.851Z,1528881433.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:17:13.852Z,1528881433.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:14.244Z,1528881434.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:17:14.246Z,1528881434.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:14.644Z,1528881434.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:17:14.650Z,1528881434.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:15.027Z,1528881435.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:17:15.028Z,1528881435.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:15.428Z,1528881435.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:17:15.430Z,1528881435.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:15.829Z,1528881435.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:17:15.830Z,1528881435.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:16.227Z,1528881436.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:17:16.228Z,1528881436.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:16.635Z,1528881436.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:17:16.636Z,1528881436.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:17.057Z,1528881437.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:17:17.058Z,1528881437.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:17.460Z,1528881437.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:17:17.461Z,1528881437.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:17.828Z,1528881437.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T09:17:17.829Z,1528881437.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:18.232Z,1528881438.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:18.628Z,1528881438.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:19.026Z,1528881439.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:19.456Z,1528881439.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:19.856Z,1528881439.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:20.255Z,1528881440.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:20.632Z,1528881440.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:21.032Z,1528881441.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:21.432Z,1528881441.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:21.833Z,1528881441.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:22.233Z,1528881442.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:22.635Z,1528881442.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:23.042Z,1528881443.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:23.443Z,1528881443.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:23.836Z,1528881443.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:24.236Z,1528881444.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:24.637Z,1528881444.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:25.031Z,1528881445.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:25.439Z,1528881445.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:25.839Z,1528881445.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:26.236Z,1528881446.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:26.642Z,1528881446.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:27.040Z,1528881447.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:27.436Z,1528881447.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:27.836Z,1528881447.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:28.236Z,1528881448.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:28.641Z,1528881448.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:29.052Z,1528881449.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:29.450Z,1528881449.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:29.840Z,1528881449.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:30.235Z,1528881450.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:30.638Z,1528881450.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:31.040Z,1528881451.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:31.456Z,1528881451.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:31.845Z,1528881451.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:32.241Z,1528881452.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:32.635Z,1528881452.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:33.044Z,1528881453.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:33.443Z,1528881453.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:33.840Z,1528881453.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:34.237Z,1528881454.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:34.641Z,1528881454.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:35.052Z,1528881455.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:35.446Z,1528881455.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:35.840Z,1528881455.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:36.255Z,1528881456.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:36.638Z,1528881456.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:37.033Z,1528881457.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:37.444Z,1528881457.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:37.856Z,1528881457.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:38.246Z,1528881458.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:38.635Z,1528881458.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:39.044Z,1528881459.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:39.444Z,1528881459.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:39.838Z,1528881459.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:40.241Z,1528881460.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:40.646Z,1528881460.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:41.044Z,1528881461.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:41.447Z,1528881461.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:41.843Z,1528881461.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:42.250Z,1528881462.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:42.642Z,1528881462.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:43.043Z,1528881463.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:43.446Z,1528881463.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:43.851Z,1528881463.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:44.253Z,1528881464.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:44.643Z,1528881464.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:45.045Z,1528881465.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:45.444Z,1528881465.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:45.843Z,1528881465.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:46.245Z,1528881466.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:46.638Z,1528881466.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:47.173Z,1528881467.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:47.544Z,1528881467.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:47.846Z,1528881467.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:48.268Z,1528881468.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:48.644Z,1528881468.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:49.036Z,1528881469.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:49.444Z,1528881469.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:49.845Z,1528881469.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:50.251Z,1528881470.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:50.630Z,1528881470.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:51.032Z,1528881471.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:51.430Z,1528881471.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:51.839Z,1528881471.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:52.235Z,1528881472.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:52.649Z,1528881472.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:53.052Z,1528881473.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:53.448Z,1528881473.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:53.831Z,1528881473.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:54.240Z,1528881474.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:54.637Z,1528881474.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:55.030Z,1528881475.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:55.442Z,1528881475.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:55.847Z,1528881475.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:56.242Z,1528881476.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:56.634Z,1528881476.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:57.035Z,1528881477.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:57.433Z,1528881477.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:57.833Z,1528881477.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:58.234Z,1528881478.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:58.655Z,1528881478.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:59.045Z,1528881479.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:59.446Z,1528881479.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:17:59.829Z,1528881479.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:00.233Z,1528881480.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:00.635Z,1528881480.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:01.032Z,1528881481.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:01.447Z,1528881481.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:01.856Z,1528881481.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:02.240Z,1528881482.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:02.637Z,1528881482.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:03.035Z,1528881483.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:03.434Z,1528881483.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:03.833Z,1528881483.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:04.244Z,1528881484.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:04.639Z,1528881484.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:05.045Z,1528881485.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:05.452Z,1528881485.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:05.833Z,1528881485.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:06.234Z,1528881486.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:06.637Z,1528881486.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:07.041Z,1528881487.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:07.449Z,1528881487.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:10.556Z,1528881490.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:10.740Z,1528881490.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:11.096Z,1528881491.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:11.496Z,1528881491.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:11.893Z,1528881491.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:12.296Z,1528881492.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:12.706Z,1528881492.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:13.101Z,1528881493.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:13.501Z,1528881493.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:13.895Z,1528881493.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:14.293Z,1528881494.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:14.693Z,1528881494.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:15.095Z,1528881495.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:15.501Z,1528881495.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:15.905Z,1528881495.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:16.306Z,1528881496.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:16.698Z,1528881496.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:17.096Z,1528881497.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:17.495Z,1528881497.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:17.893Z,1528881497.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:18.292Z,1528881498.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:18.706Z,1528881498.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:19.104Z,1528881499.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:19.501Z,1528881499.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:19.895Z,1528881499.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:20.292Z,1528881500.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:20.693Z,1528881500.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:21.095Z,1528881501.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:21.500Z,1528881501.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:21.916Z,1528881501.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:22.312Z,1528881502.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:22.698Z,1528881502.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:23.092Z,1528881503.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:23.495Z,1528881503.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:23.894Z,1528881503.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:24.292Z,1528881504.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:24.707Z,1528881504.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:25.100Z,1528881505.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:25.502Z,1528881505.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:25.902Z,1528881505.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:26.293Z,1528881506.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:26.702Z,1528881506.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:27.090Z,1528881507.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:27.511Z,1528881507.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:27.910Z,1528881507.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:28.318Z,1528881508.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:28.694Z,1528881508.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:29.105Z,1528881509.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:29.485Z,1528881509.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:29.905Z,1528881509.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:30.288Z,1528881510.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:30.696Z,1528881510.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:31.099Z,1528881511.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:31.491Z,1528881511.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:31.886Z,1528881511.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:32.292Z,1528881512.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:32.688Z,1528881512.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:33.087Z,1528881513.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:33.495Z,1528881513.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:33.899Z,1528881513.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:34.296Z,1528881514.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:34.690Z,1528881514.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:35.091Z,1528881515.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:35.488Z,1528881515.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:35.892Z,1528881515.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:36.295Z,1528881516.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:36.695Z,1528881516.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:37.120Z,1528881517.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:37.496Z,1528881517.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:37.887Z,1528881517.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:38.292Z,1528881518.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:38.690Z,1528881518.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:39.087Z,1528881519.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:39.500Z,1528881519.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:39.899Z,1528881519.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:40.298Z,1528881520.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:40.690Z,1528881520.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:41.095Z,1528881521.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:41.492Z,1528881521.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:41.891Z,1528881521.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:42.293Z,1528881522.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:42.700Z,1528881522.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:43.104Z,1528881523.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:43.499Z,1528881523.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:43.892Z,1528881523.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:44.292Z,1528881524.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:44.693Z,1528881524.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:45.091Z,1528881525.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:45.501Z,1528881525.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:45.903Z,1528881525.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:46.304Z,1528881526.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:46.690Z,1528881526.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:47.096Z,1528881527.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:47.490Z,1528881527.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:47.905Z,1528881527.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:48.292Z,1528881528.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:48.705Z,1528881528.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:49.105Z,1528881529.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:49.500Z,1528881529.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:49.891Z,1528881529.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:50.292Z,1528881530.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:50.692Z,1528881530.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:51.094Z,1528881531.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:51.501Z,1528881531.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:51.906Z,1528881531.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:52.301Z,1528881532.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:52.693Z,1528881532.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:53.092Z,1528881533.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:53.494Z,1528881533.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:53.893Z,1528881533.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:54.291Z,1528881534.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:54.706Z,1528881534.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:55.104Z,1528881535.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:55.501Z,1528881535.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:55.890Z,1528881535.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:56.292Z,1528881536.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:56.693Z,1528881536.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:57.094Z,1528881537.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:57.505Z,1528881537.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:57.904Z,1528881537.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:58.304Z,1528881538.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:58.703Z,1528881538.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:59.091Z,1528881539.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:59.494Z,1528881539.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:18:59.892Z,1528881539.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:00.292Z,1528881540.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:00.702Z,1528881540.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:01.104Z,1528881541.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:01.505Z,1528881541.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:01.890Z,1528881541.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:02.300Z,1528881542.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:02.693Z,1528881542.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:03.095Z,1528881543.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:03.506Z,1528881543.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:03.912Z,1528881543.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:04.312Z,1528881544.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:04.698Z,1528881544.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:05.093Z,1528881545.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:05.496Z,1528881545.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:05.893Z,1528881545.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:06.304Z,1528881546.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:06.703Z,1528881546.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:07.106Z,1528881547.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:07.507Z,1528881547.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:07.900Z,1528881547.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:08.298Z,1528881548.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:08.698Z,1528881548.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:11.806Z,1528881551.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:11.962Z,1528881551.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:12.362Z,1528881552.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:12.763Z,1528881552.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:13.151Z,1528881553.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:13.544Z,1528881553.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:13.947Z,1528881553.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:14.346Z,1528881554.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:14.757Z,1528881554.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:15.161Z,1528881555.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:15.549Z,1528881555.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:15.944Z,1528881555.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:16.347Z,1528881556.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:16.743Z,1528881556.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:17.144Z,1528881557.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:17.557Z,1528881557.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:17.953Z,1528881557.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:18.358Z,1528881558.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:18.748Z,1528881558.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:19.150Z,1528881559.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:19.545Z,1528881559.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:19.948Z,1528881559.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:20.345Z,1528881560.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:20.760Z,1528881560.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:21.155Z,1528881561.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:21.552Z,1528881561.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:21.960Z,1528881561.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:22.347Z,1528881562.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:22.745Z,1528881562.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:23.145Z,1528881563.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:23.557Z,1528881563.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:23.957Z,1528881563.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:24.353Z,1528881564.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:24.756Z,1528881564.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:25.150Z,1528881565.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:25.544Z,1528881565.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:25.948Z,1528881565.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:26.344Z,1528881566.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:26.753Z,1528881566.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:27.156Z,1528881567.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:27.549Z,1528881567.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:27.945Z,1528881567.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:28.346Z,1528881568.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:28.744Z,1528881568.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:29.144Z,1528881569.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:29.557Z,1528881569.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:29.953Z,1528881569.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:30.354Z,1528881570.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:30.752Z,1528881570.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:31.149Z,1528881571.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:31.544Z,1528881571.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:31.951Z,1528881571.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:32.346Z,1528881572.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:32.754Z,1528881572.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:33.153Z,1528881573.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:33.551Z,1528881573.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:33.944Z,1528881573.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:34.346Z,1528881574.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:34.744Z,1528881574.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:35.144Z,1528881575.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:35.558Z,1528881575.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:35.952Z,1528881575.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:36.354Z,1528881576.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:36.746Z,1528881576.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:37.144Z,1528881577.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:37.545Z,1528881577.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:37.946Z,1528881577.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:38.344Z,1528881578.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:38.753Z,1528881578.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:39.157Z,1528881579.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:39.550Z,1528881579.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:39.944Z,1528881579.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:40.346Z,1528881580.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:40.748Z,1528881580.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:41.144Z,1528881581.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:41.558Z,1528881581.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:41.952Z,1528881581.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:42.358Z,1528881582.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:42.747Z,1528881582.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:43.144Z,1528881583.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:43.544Z,1528881583.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:43.947Z,1528881583.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:44.355Z,1528881584.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:44.753Z,1528881584.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:45.154Z,1528881585.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:45.551Z,1528881585.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:45.953Z,1528881585.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:46.353Z,1528881586.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:46.749Z,1528881586.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:47.157Z,1528881587.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:47.556Z,1528881587.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:47.964Z,1528881587.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:48.355Z,1528881588.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:48.762Z,1528881588.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:49.134Z,1528881589.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:49.537Z,1528881589.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:49.936Z,1528881589.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:50.336Z,1528881590.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:50.756Z,1528881590.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:51.166Z,1528881591.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:51.564Z,1528881591.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:51.940Z,1528881591.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:52.341Z,1528881592.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:52.745Z,1528881592.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:53.139Z,1528881593.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:53.573Z,1528881593.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:53.970Z,1528881593.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:54.371Z,1528881594.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:54.740Z,1528881594.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:55.138Z,1528881595.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:55.551Z,1528881595.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:55.951Z,1528881595.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:56.343Z,1528881596.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:56.741Z,1528881596.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:57.139Z,1528881597.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:57.548Z,1528881597.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:57.973Z,1528881597.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:58.377Z,1528881598.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:58.743Z,1528881598.743 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:58.743Z,1528881598.743 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 118
2018-06-13T09:19:58.743Z,1528881598.743 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:19:58.745Z,1528881598.745 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:58.745Z,1528881598.745 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 118
2018-06-13T09:19:58.745Z,1528881598.745 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:19:58.747Z,1528881598.747 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:19:58.747Z,1528881598.747 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 118
2018-06-13T09:19:58.747Z,1528881598.747 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:19:58.833Z,1528881598.833 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:19:58.833Z,1528881598.833 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:19:58.834Z,1528881598.834 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:19:59.229Z,1528881599.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:19:59.229Z,1528881599.229 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 118
2018-06-13T09:19:59.230Z,1528881599.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:19:59.230Z,1528881599.230 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 118
2018-06-13T09:19:59.230Z,1528881599.230 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:19:59.230Z,1528881599.230 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 118
2018-06-13T09:19:59.552Z,1528881599.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:19:59.553Z,1528881599.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:19:59.553Z,1528881599.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:19:59.553Z,1528881599.553 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:19:59.554Z,1528881599.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:19:59.554Z,1528881599.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:19:59.555Z,1528881599.555 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:19:59.555Z,1528881599.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:19:59.555Z,1528881599.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:19:59.959Z,1528881599.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:19:59.960Z,1528881599.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:00.360Z,1528881600.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:20:00.361Z,1528881600.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:00.749Z,1528881600.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:20:00.750Z,1528881600.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:01.144Z,1528881601.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:20:01.146Z,1528881601.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:01.551Z,1528881601.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:20:01.552Z,1528881601.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:01.953Z,1528881601.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:20:01.954Z,1528881601.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:02.351Z,1528881602.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:20:02.352Z,1528881602.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:02.746Z,1528881602.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:20:02.747Z,1528881602.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:03.146Z,1528881603.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:20:03.147Z,1528881603.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:03.552Z,1528881603.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:20:03.552Z,1528881603.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:03.957Z,1528881603.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:20:03.958Z,1528881603.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:04.361Z,1528881604.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:20:04.362Z,1528881604.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:04.745Z,1528881604.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:20:04.746Z,1528881604.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:05.143Z,1528881605.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:20:05.144Z,1528881605.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:05.560Z,1528881605.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:20:05.561Z,1528881605.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:05.952Z,1528881605.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:20:05.953Z,1528881605.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:06.352Z,1528881606.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:20:06.353Z,1528881606.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:06.746Z,1528881606.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:20:06.747Z,1528881606.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:07.144Z,1528881607.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:20:07.149Z,1528881607.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:07.564Z,1528881607.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:20:07.565Z,1528881607.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:10.670Z,1528881610.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T09:20:10.670Z,1528881610.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:10.822Z,1528881610.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T09:20:10.823Z,1528881610.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:11.207Z,1528881611.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T09:20:11.208Z,1528881611.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:11.612Z,1528881611.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T09:20:11.614Z,1528881611.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:12.004Z,1528881612.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T09:20:12.009Z,1528881612.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:12.413Z,1528881612.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T09:20:12.414Z,1528881612.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:12.818Z,1528881612.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T09:20:12.819Z,1528881612.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:13.214Z,1528881613.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T09:20:13.215Z,1528881613.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:13.620Z,1528881613.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T09:20:13.621Z,1528881613.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:14.008Z,1528881614.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T09:20:14.009Z,1528881614.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:14.396Z,1528881614.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T09:20:14.413Z,1528881614.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:14.797Z,1528881614.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T09:20:14.798Z,1528881614.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:15.200Z,1528881615.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T09:20:15.200Z,1528881615.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:15.626Z,1528881615.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T09:20:15.626Z,1528881615.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:16.028Z,1528881616.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T09:20:16.029Z,1528881616.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:16.427Z,1528881616.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T09:20:16.428Z,1528881616.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:16.804Z,1528881616.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T09:20:16.825Z,1528881616.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:17.199Z,1528881617.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T09:20:17.200Z,1528881617.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:17.599Z,1528881617.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T09:20:17.600Z,1528881617.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:17.000Z,1528881618.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T09:20:18.001Z,1528881618.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:18.404Z,1528881618.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T09:20:18.405Z,1528881618.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:18.830Z,1528881618.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:19.227Z,1528881619.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:19.611Z,1528881619.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:19.000Z,1528881620.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:20.400Z,1528881620.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:20.799Z,1528881620.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:21.204Z,1528881621.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:21.611Z,1528881621.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:22.010Z,1528881622.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:22.432Z,1528881622.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:22.799Z,1528881622.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:23.202Z,1528881623.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:23.603Z,1528881623.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:23.999Z,1528881623.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:24.403Z,1528881624.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:24.811Z,1528881624.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:25.212Z,1528881625.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:25.607Z,1528881625.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:26.003Z,1528881626.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:26.408Z,1528881626.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:26.801Z,1528881626.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:27.204Z,1528881627.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:27.607Z,1528881627.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:28.010Z,1528881628.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:28.411Z,1528881628.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:28.804Z,1528881628.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:29.201Z,1528881629.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:29.603Z,1528881629.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:30.010Z,1528881630.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:30.403Z,1528881630.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:30.811Z,1528881630.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:31.215Z,1528881631.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:31.608Z,1528881631.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:32.005Z,1528881632.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:32.404Z,1528881632.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:32.814Z,1528881632.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:33.204Z,1528881633.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:33.608Z,1528881633.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:34.012Z,1528881634.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:34.409Z,1528881634.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:34.809Z,1528881634.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:35.205Z,1528881635.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:35.616Z,1528881635.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:36.012Z,1528881636.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:36.412Z,1528881636.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:36.806Z,1528881636.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:37.223Z,1528881637.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:37.611Z,1528881637.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:38.013Z,1528881638.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:38.416Z,1528881638.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:38.814Z,1528881638.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:39.204Z,1528881639.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:39.617Z,1528881639.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:40.016Z,1528881640.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:40.418Z,1528881640.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:40.815Z,1528881640.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:41.212Z,1528881641.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:41.619Z,1528881641.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:42.017Z,1528881642.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:42.417Z,1528881642.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:42.816Z,1528881642.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:43.218Z,1528881643.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:43.616Z,1528881643.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:44.021Z,1528881644.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:44.422Z,1528881644.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:44.817Z,1528881644.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:45.196Z,1528881645.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:45.626Z,1528881645.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:46.019Z,1528881646.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:46.428Z,1528881646.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:46.797Z,1528881646.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:47.199Z,1528881647.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:47.623Z,1528881647.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:48.028Z,1528881648.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:48.426Z,1528881648.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:48.800Z,1528881648.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:49.219Z,1528881649.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:49.627Z,1528881649.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:50.010Z,1528881650.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:50.412Z,1528881650.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:50.802Z,1528881650.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:51.202Z,1528881651.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:51.607Z,1528881651.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:52.006Z,1528881652.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:52.433Z,1528881652.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:52.808Z,1528881652.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:53.204Z,1528881653.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:53.610Z,1528881653.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:54.011Z,1528881654.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:54.411Z,1528881654.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:54.802Z,1528881654.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:55.208Z,1528881655.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:55.607Z,1528881655.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:56.006Z,1528881656.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:56.431Z,1528881656.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:56.808Z,1528881656.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:57.202Z,1528881657.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:57.611Z,1528881657.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:58.014Z,1528881658.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:58.412Z,1528881658.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:58.802Z,1528881658.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:59.207Z,1528881659.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:20:59.611Z,1528881659.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:00.011Z,1528881660.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:00.407Z,1528881660.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:00.804Z,1528881660.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:01.204Z,1528881661.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:01.615Z,1528881661.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:02.011Z,1528881662.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:02.416Z,1528881662.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:02.806Z,1528881662.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:03.207Z,1528881663.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:03.601Z,1528881663.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:04.010Z,1528881664.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:04.407Z,1528881664.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:04.811Z,1528881664.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:05.203Z,1528881665.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:05.601Z,1528881665.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:06.007Z,1528881666.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:06.403Z,1528881666.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:06.811Z,1528881666.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:07.237Z,1528881667.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:07.639Z,1528881667.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:08.005Z,1528881668.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:08.403Z,1528881668.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:08.810Z,1528881668.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:11.913Z,1528881671.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:12.090Z,1528881672.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:12.483Z,1528881672.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:12.893Z,1528881672.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:13.263Z,1528881673.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:13.680Z,1528881673.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:14.072Z,1528881674.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:14.467Z,1528881674.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:14.893Z,1528881674.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:15.294Z,1528881675.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:15.692Z,1528881675.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:16.072Z,1528881676.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:16.468Z,1528881676.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:16.893Z,1528881676.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:17.268Z,1528881677.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:17.674Z,1528881677.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:18.095Z,1528881678.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:18.479Z,1528881678.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:18.872Z,1528881678.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:19.272Z,1528881679.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:19.700Z,1528881679.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:20.078Z,1528881680.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:20.479Z,1528881680.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:20.872Z,1528881680.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:21.272Z,1528881681.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:21.677Z,1528881681.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:22.084Z,1528881682.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:22.475Z,1528881682.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:22.868Z,1528881682.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:23.270Z,1528881683.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:23.679Z,1528881683.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:24.075Z,1528881684.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:24.476Z,1528881684.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:24.871Z,1528881684.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:25.268Z,1528881685.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:25.675Z,1528881685.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:26.078Z,1528881686.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:26.480Z,1528881686.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:26.870Z,1528881686.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:27.270Z,1528881687.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:27.676Z,1528881687.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:28.082Z,1528881688.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:28.481Z,1528881688.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:28.876Z,1528881688.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:29.278Z,1528881689.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:29.682Z,1528881689.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:30.080Z,1528881690.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:30.484Z,1528881690.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:30.872Z,1528881690.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:31.272Z,1528881691.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:31.687Z,1528881691.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:32.080Z,1528881692.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:32.476Z,1528881692.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:32.871Z,1528881692.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:33.272Z,1528881693.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:33.680Z,1528881693.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:34.084Z,1528881694.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:34.480Z,1528881694.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:34.871Z,1528881694.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:35.270Z,1528881695.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:35.684Z,1528881695.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:36.088Z,1528881696.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:36.479Z,1528881696.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:36.872Z,1528881696.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:37.268Z,1528881697.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:37.683Z,1528881697.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:38.080Z,1528881698.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:38.480Z,1528881698.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:38.871Z,1528881698.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:39.276Z,1528881699.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:39.680Z,1528881699.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:40.084Z,1528881700.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:40.484Z,1528881700.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:40.871Z,1528881700.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:41.270Z,1528881701.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:41.680Z,1528881701.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:42.079Z,1528881702.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:42.484Z,1528881702.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:42.873Z,1528881702.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:43.270Z,1528881703.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:43.684Z,1528881703.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:44.088Z,1528881704.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:44.483Z,1528881704.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:44.871Z,1528881704.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:45.272Z,1528881705.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:45.698Z,1528881705.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:46.083Z,1528881706.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:46.488Z,1528881706.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:46.871Z,1528881706.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:47.275Z,1528881707.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:47.682Z,1528881707.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:48.083Z,1528881708.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:48.480Z,1528881708.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:48.875Z,1528881708.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:49.269Z,1528881709.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:49.684Z,1528881709.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:50.088Z,1528881710.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:50.484Z,1528881710.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:50.875Z,1528881710.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:51.273Z,1528881711.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:51.684Z,1528881711.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:52.088Z,1528881712.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:52.483Z,1528881712.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:52.874Z,1528881712.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:53.272Z,1528881713.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:53.692Z,1528881713.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:54.085Z,1528881714.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:54.484Z,1528881714.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:54.871Z,1528881714.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:55.274Z,1528881715.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:55.674Z,1528881715.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:56.081Z,1528881716.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:56.485Z,1528881716.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:56.888Z,1528881716.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:57.277Z,1528881717.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:57.672Z,1528881717.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:58.074Z,1528881718.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:58.485Z,1528881718.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:58.886Z,1528881718.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:59.291Z,1528881719.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:21:59.681Z,1528881719.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:00.080Z,1528881720.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:00.484Z,1528881720.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:00.878Z,1528881720.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:01.284Z,1528881721.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:01.692Z,1528881721.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:02.119Z,1528881722.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:02.492Z,1528881722.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:02.882Z,1528881722.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:03.286Z,1528881723.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:03.679Z,1528881723.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:04.086Z,1528881724.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:04.483Z,1528881724.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:04.888Z,1528881724.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:05.297Z,1528881725.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:05.690Z,1528881725.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:06.064Z,1528881726.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:06.491Z,1528881726.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:06.894Z,1528881726.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:07.270Z,1528881727.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:07.289Z,1528881727.289 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T09:22:07.289Z,1528881727.289 [Default:CheckIn:C.Wait] Stopped
2018-06-13T09:22:07.289Z,1528881727.289 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T09:22:07.289Z,1528881727.289 [Default:CheckIn:D] Running Loop=1
2018-06-13T09:22:07.675Z,1528881727.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:07.695Z,1528881727.695 [Default:CheckIn:D] Stopped
2018-06-13T09:22:07.695Z,1528881727.695 [Default:CheckIn:E] Running Loop=1
2018-06-13T09:22:10.800Z,1528881730.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:10.803Z,1528881730.803 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 354.904167 min 
2018-06-13T09:22:10.803Z,1528881730.803 [Default:CheckIn:E] Stopped
2018-06-13T09:22:10.803Z,1528881730.803 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T09:22:10.803Z,1528881730.803 [Default:CheckIn] Stopped
2018-06-13T09:22:10.803Z,1528881730.803 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T09:22:10.804Z,1528881730.804 [Default:CheckIn](INFO): Running loop #35
2018-06-13T09:22:10.804Z,1528881730.804 [Default:CheckIn] Running Loop=35
2018-06-13T09:22:10.804Z,1528881730.804 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T09:22:10.804Z,1528881730.804 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T09:22:10.951Z,1528881730.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:11.343Z,1528881731.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:11.740Z,1528881731.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:12.140Z,1528881732.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:12.536Z,1528881732.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:12.945Z,1528881732.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:13.344Z,1528881733.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:13.744Z,1528881733.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:14.136Z,1528881734.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:14.534Z,1528881734.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:14.941Z,1528881734.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:15.336Z,1528881735.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:15.743Z,1528881735.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:16.148Z,1528881736.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:16.546Z,1528881736.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:16.940Z,1528881736.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:17.336Z,1528881737.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:17.749Z,1528881737.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:18.156Z,1528881738.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:18.545Z,1528881738.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:18.940Z,1528881738.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:19.339Z,1528881739.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:19.749Z,1528881739.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:20.149Z,1528881740.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:20.543Z,1528881740.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:20.940Z,1528881740.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:21.342Z,1528881741.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:21.746Z,1528881741.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:22.147Z,1528881742.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:22.546Z,1528881742.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:22.943Z,1528881742.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:23.339Z,1528881743.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:23.750Z,1528881743.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:24.147Z,1528881744.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:24.549Z,1528881744.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:24.947Z,1528881744.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:25.341Z,1528881745.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:25.747Z,1528881745.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:26.149Z,1528881746.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:26.556Z,1528881746.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:26.947Z,1528881746.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:27.341Z,1528881747.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:27.749Z,1528881747.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:28.152Z,1528881748.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:28.568Z,1528881748.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:28.936Z,1528881748.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:29.340Z,1528881749.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:29.787Z,1528881749.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:30.157Z,1528881750.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:30.547Z,1528881750.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:30.952Z,1528881750.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:31.344Z,1528881751.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:31.749Z,1528881751.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:32.156Z,1528881752.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:32.545Z,1528881752.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:32.939Z,1528881752.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:33.344Z,1528881753.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:33.745Z,1528881753.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:34.151Z,1528881754.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:34.556Z,1528881754.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:34.942Z,1528881754.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:35.362Z,1528881755.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:35.756Z,1528881755.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:36.152Z,1528881756.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:36.549Z,1528881756.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:36.944Z,1528881756.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:37.341Z,1528881757.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:37.739Z,1528881757.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:38.155Z,1528881758.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:38.550Z,1528881758.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:38.947Z,1528881758.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:39.342Z,1528881759.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:39.739Z,1528881759.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:40.144Z,1528881760.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:40.560Z,1528881760.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:40.948Z,1528881760.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:41.348Z,1528881761.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:41.754Z,1528881761.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:42.143Z,1528881762.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:42.551Z,1528881762.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:42.944Z,1528881762.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:43.343Z,1528881763.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:43.742Z,1528881763.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:44.161Z,1528881764.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:44.548Z,1528881764.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:44.955Z,1528881764.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:45.347Z,1528881765.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:45.741Z,1528881765.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:46.142Z,1528881766.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:46.550Z,1528881766.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:46.961Z,1528881766.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:47.355Z,1528881767.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:47.753Z,1528881767.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:48.149Z,1528881768.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:48.551Z,1528881768.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:48.946Z,1528881768.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:49.348Z,1528881769.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:49.763Z,1528881769.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:50.169Z,1528881770.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:50.557Z,1528881770.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:50.960Z,1528881770.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:51.362Z,1528881771.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:51.759Z,1528881771.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:52.138Z,1528881772.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:52.534Z,1528881772.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:52.968Z,1528881772.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:53.364Z,1528881773.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:53.744Z,1528881773.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:54.138Z,1528881774.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:54.561Z,1528881774.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:54.936Z,1528881774.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:55.340Z,1528881775.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:55.738Z,1528881775.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:56.166Z,1528881776.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:56.566Z,1528881776.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:56.944Z,1528881776.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:57.336Z,1528881777.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:57.733Z,1528881777.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:58.134Z,1528881778.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:58.536Z,1528881778.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:58.944Z,1528881778.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:59.371Z,1528881779.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:59.771Z,1528881779.771 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:59.771Z,1528881779.771 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 119
2018-06-13T09:22:59.771Z,1528881779.771 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:22:59.773Z,1528881779.773 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:59.773Z,1528881779.773 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 119
2018-06-13T09:22:59.773Z,1528881779.773 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:22:59.775Z,1528881779.775 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:22:59.775Z,1528881779.775 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 119
2018-06-13T09:22:59.775Z,1528881779.775 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:22:59.845Z,1528881779.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:22:59.845Z,1528881779.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:22:59.846Z,1528881779.846 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:23:00.221Z,1528881780.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:23:00.221Z,1528881780.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 119
2018-06-13T09:23:00.222Z,1528881780.222 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:23:00.222Z,1528881780.222 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 119
2018-06-13T09:23:00.222Z,1528881780.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:23:00.222Z,1528881780.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 119
2018-06-13T09:23:00.545Z,1528881780.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:23:00.546Z,1528881780.546 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:23:00.546Z,1528881780.546 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:23:00.547Z,1528881780.547 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:23:00.547Z,1528881780.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:23:00.547Z,1528881780.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:23:00.548Z,1528881780.548 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:23:00.548Z,1528881780.548 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:23:00.548Z,1528881780.548 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:23:00.935Z,1528881780.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:23:00.936Z,1528881780.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:01.347Z,1528881781.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:23:01.348Z,1528881781.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:01.735Z,1528881781.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:23:01.737Z,1528881781.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:02.149Z,1528881782.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:23:02.150Z,1528881782.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:02.577Z,1528881782.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:23:02.578Z,1528881782.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:02.944Z,1528881782.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:23:02.946Z,1528881782.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:03.334Z,1528881783.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:23:03.336Z,1528881783.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:03.741Z,1528881783.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:23:03.742Z,1528881783.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:04.135Z,1528881784.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:23:04.136Z,1528881784.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:04.544Z,1528881784.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:23:04.545Z,1528881784.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:04.950Z,1528881784.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:23:04.951Z,1528881784.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:05.354Z,1528881785.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:23:05.355Z,1528881785.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:05.757Z,1528881785.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:23:05.758Z,1528881785.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:06.142Z,1528881786.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:23:06.143Z,1528881786.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:06.535Z,1528881786.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:23:06.536Z,1528881786.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:06.943Z,1528881786.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:23:06.944Z,1528881786.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:07.341Z,1528881787.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:23:07.342Z,1528881787.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:07.739Z,1528881787.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:23:07.740Z,1528881787.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:10.863Z,1528881790.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T09:23:10.864Z,1528881790.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:11.042Z,1528881791.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T09:23:11.043Z,1528881791.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:11.434Z,1528881791.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T09:23:11.435Z,1528881791.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:11.837Z,1528881791.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T09:23:11.838Z,1528881791.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:12.220Z,1528881792.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T09:23:12.221Z,1528881792.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:12.619Z,1528881792.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T09:23:12.620Z,1528881792.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:13.027Z,1528881793.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T09:23:13.028Z,1528881793.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:13.428Z,1528881793.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T09:23:13.445Z,1528881793.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:13.827Z,1528881793.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T09:23:13.828Z,1528881793.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:14.218Z,1528881794.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T09:23:14.219Z,1528881794.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:14.624Z,1528881794.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T09:23:14.625Z,1528881794.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:15.018Z,1528881795.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T09:23:15.019Z,1528881795.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:15.418Z,1528881795.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T09:23:15.419Z,1528881795.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:15.852Z,1528881795.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T09:23:15.857Z,1528881795.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:16.283Z,1528881796.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T09:23:16.284Z,1528881796.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:16.626Z,1528881796.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T09:23:16.627Z,1528881796.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:17.022Z,1528881797.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T09:23:17.023Z,1528881797.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:17.418Z,1528881797.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T09:23:17.419Z,1528881797.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:17.827Z,1528881797.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T09:23:17.828Z,1528881797.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:18.228Z,1528881798.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T09:23:18.229Z,1528881798.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:18.627Z,1528881798.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T09:23:18.628Z,1528881798.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:19.020Z,1528881799.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T09:23:19.021Z,1528881799.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:19.419Z,1528881799.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T09:23:19.419Z,1528881799.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:19.828Z,1528881799.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:20.236Z,1528881800.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:20.636Z,1528881800.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:21.024Z,1528881801.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:21.419Z,1528881801.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:21.832Z,1528881801.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:22.228Z,1528881802.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:22.627Z,1528881802.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:23.055Z,1528881803.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:23.428Z,1528881803.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:23.826Z,1528881803.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:24.228Z,1528881804.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:24.627Z,1528881804.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:25.035Z,1528881805.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:25.424Z,1528881805.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:25.828Z,1528881805.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:26.227Z,1528881806.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:26.636Z,1528881806.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:27.023Z,1528881807.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:27.421Z,1528881807.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:27.828Z,1528881807.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:28.256Z,1528881808.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:28.636Z,1528881808.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:29.023Z,1528881809.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:29.422Z,1528881809.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:29.830Z,1528881809.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:30.228Z,1528881810.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:30.636Z,1528881810.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:31.023Z,1528881811.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:31.423Z,1528881811.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:31.833Z,1528881811.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:32.256Z,1528881812.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:32.628Z,1528881812.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:33.026Z,1528881813.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:33.433Z,1528881813.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:33.820Z,1528881813.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:34.235Z,1528881814.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:34.638Z,1528881814.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:35.032Z,1528881815.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:35.434Z,1528881815.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:35.831Z,1528881815.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:36.236Z,1528881816.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:36.640Z,1528881816.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:37.036Z,1528881817.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:37.432Z,1528881817.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:37.835Z,1528881817.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:38.239Z,1528881818.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:38.628Z,1528881818.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:39.032Z,1528881819.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:39.441Z,1528881819.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:39.827Z,1528881819.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:40.246Z,1528881820.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:40.631Z,1528881820.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:41.048Z,1528881821.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:41.432Z,1528881821.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:41.830Z,1528881821.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:42.235Z,1528881822.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:42.640Z,1528881822.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:43.041Z,1528881823.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:43.437Z,1528881823.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:43.834Z,1528881823.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:44.238Z,1528881824.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:44.637Z,1528881824.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:45.034Z,1528881825.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:45.414Z,1528881825.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:45.847Z,1528881825.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:46.242Z,1528881826.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:46.648Z,1528881826.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:47.042Z,1528881827.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:47.447Z,1528881827.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:47.820Z,1528881827.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:48.219Z,1528881828.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:48.620Z,1528881828.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:49.052Z,1528881829.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:49.432Z,1528881829.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:49.833Z,1528881829.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:50.220Z,1528881830.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:50.628Z,1528881830.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:51.025Z,1528881831.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:51.425Z,1528881831.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:51.822Z,1528881831.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:52.234Z,1528881832.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:52.636Z,1528881832.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:53.031Z,1528881833.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:53.423Z,1528881833.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:53.820Z,1528881833.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:54.226Z,1528881834.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:54.623Z,1528881834.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:55.032Z,1528881835.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:55.454Z,1528881835.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:55.832Z,1528881835.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:56.223Z,1528881836.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:56.630Z,1528881836.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:57.019Z,1528881837.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:57.420Z,1528881837.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:57.822Z,1528881837.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:58.236Z,1528881838.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:58.665Z,1528881838.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:59.029Z,1528881839.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:59.421Z,1528881839.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:23:59.825Z,1528881839.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:00.218Z,1528881840.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:00.624Z,1528881840.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:01.039Z,1528881841.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:01.438Z,1528881841.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:01.864Z,1528881841.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:02.224Z,1528881842.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:02.630Z,1528881842.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:03.032Z,1528881843.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:03.428Z,1528881843.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:03.824Z,1528881843.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:04.231Z,1528881844.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:04.637Z,1528881844.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:05.032Z,1528881845.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:05.431Z,1528881845.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:05.828Z,1528881845.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:06.228Z,1528881846.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:06.630Z,1528881846.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:07.031Z,1528881847.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:07.444Z,1528881847.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:07.839Z,1528881847.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:10.930Z,1528881850.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:11.070Z,1528881851.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:11.492Z,1528881851.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:11.887Z,1528881851.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:12.283Z,1528881852.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:12.668Z,1528881852.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:13.093Z,1528881853.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:13.486Z,1528881853.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:13.867Z,1528881853.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:14.270Z,1528881854.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:14.690Z,1528881854.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:15.095Z,1528881855.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:15.469Z,1528881855.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:15.869Z,1528881855.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:16.294Z,1528881856.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:16.670Z,1528881856.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:17.076Z,1528881857.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:17.474Z,1528881857.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:17.896Z,1528881857.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:18.269Z,1528881858.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:18.668Z,1528881858.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:19.071Z,1528881859.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:19.496Z,1528881859.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:19.874Z,1528881859.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:20.276Z,1528881860.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:20.678Z,1528881860.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:21.097Z,1528881861.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:21.464Z,1528881861.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:21.867Z,1528881861.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:22.276Z,1528881862.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:22.673Z,1528881862.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:23.072Z,1528881863.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:23.477Z,1528881863.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:23.877Z,1528881863.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:24.276Z,1528881864.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:24.678Z,1528881864.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:25.067Z,1528881865.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:25.467Z,1528881865.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:25.873Z,1528881865.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:26.276Z,1528881866.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:26.681Z,1528881866.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:27.077Z,1528881867.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:27.473Z,1528881867.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:27.868Z,1528881867.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:28.279Z,1528881868.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:28.668Z,1528881868.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:29.073Z,1528881869.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:29.477Z,1528881869.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:29.884Z,1528881869.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:30.270Z,1528881870.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:30.668Z,1528881870.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:31.066Z,1528881871.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:31.461Z,1528881871.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:31.873Z,1528881871.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:32.278Z,1528881872.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:32.674Z,1528881872.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:33.073Z,1528881873.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:33.463Z,1528881873.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:33.868Z,1528881873.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:34.265Z,1528881874.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:34.676Z,1528881874.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:35.072Z,1528881875.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:35.484Z,1528881875.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:35.877Z,1528881875.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:36.268Z,1528881876.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:36.675Z,1528881876.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:37.072Z,1528881877.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:37.153Z,1528881877.153 [CBIT](IMPORTANT): Beginning ground fault scan
2018-06-13T09:24:37.470Z,1528881877.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:37.868Z,1528881877.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:38.283Z,1528881878.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:38.673Z,1528881878.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:39.074Z,1528881879.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:39.474Z,1528881879.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:39.852Z,1528881879.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:40.257Z,1528881880.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:40.655Z,1528881880.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:41.104Z,1528881881.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:41.476Z,1528881881.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:41.877Z,1528881881.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:42.261Z,1528881882.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:42.663Z,1528881882.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:43.069Z,1528881883.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:43.468Z,1528881883.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:43.864Z,1528881883.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:44.278Z,1528881884.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:44.673Z,1528881884.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:45.073Z,1528881885.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:45.464Z,1528881885.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:45.860Z,1528881885.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:46.268Z,1528881886.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:46.668Z,1528881886.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:47.076Z,1528881887.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:47.476Z,1528881887.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:47.877Z,1528881887.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:47.972Z,1528881887.972 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.128586
CHAN A1 (24V): -0.062460
CHAN A2 (12V): -0.000888
CHAN A3 (5V): -0.021421
CHAN B0 (3.3V): -0.000196
CHAN B1 (3.15aV): -0.000400
CHAN B2 (3.15bV): -0.000776
CHAN B3 (GND): -0.000236
OPEN: 0.003020
Full Scale Calc: 4.765 mA, -1.589 mA
2018-06-13T09:24:48.268Z,1528881888.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:48.676Z,1528881888.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:49.069Z,1528881889.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:49.464Z,1528881889.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:49.865Z,1528881889.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:50.278Z,1528881890.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:50.680Z,1528881890.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:51.074Z,1528881891.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:51.468Z,1528881891.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:51.866Z,1528881891.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:52.277Z,1528881892.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:52.668Z,1528881892.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:53.080Z,1528881893.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:53.478Z,1528881893.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:53.880Z,1528881893.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:54.274Z,1528881894.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:54.675Z,1528881894.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:55.076Z,1528881895.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:55.470Z,1528881895.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:55.877Z,1528881895.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:56.283Z,1528881896.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:56.677Z,1528881896.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:57.084Z,1528881897.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:57.480Z,1528881897.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:57.860Z,1528881897.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:58.261Z,1528881898.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:58.656Z,1528881898.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:59.071Z,1528881899.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:59.471Z,1528881899.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:24:59.872Z,1528881899.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:00.262Z,1528881900.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:00.668Z,1528881900.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:01.059Z,1528881901.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:01.465Z,1528881901.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:01.863Z,1528881901.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:02.269Z,1528881902.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:02.673Z,1528881902.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:03.072Z,1528881903.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:03.473Z,1528881903.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:03.865Z,1528881903.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:04.274Z,1528881904.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:04.660Z,1528881904.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:05.072Z,1528881905.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:05.472Z,1528881905.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:05.868Z,1528881905.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:06.264Z,1528881906.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:06.663Z,1528881906.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:07.059Z,1528881907.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:07.468Z,1528881907.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:07.866Z,1528881907.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:11.005Z,1528881911.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:11.167Z,1528881911.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:11.568Z,1528881911.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:11.956Z,1528881911.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:12.353Z,1528881912.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:12.759Z,1528881912.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:13.164Z,1528881913.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:13.559Z,1528881913.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:13.965Z,1528881913.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:14.336Z,1528881914.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:14.762Z,1528881914.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:15.140Z,1528881915.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:15.535Z,1528881915.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:15.935Z,1528881915.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:16.369Z,1528881916.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:16.773Z,1528881916.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:17.147Z,1528881917.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:17.540Z,1528881917.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:17.940Z,1528881917.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:18.345Z,1528881918.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:18.738Z,1528881918.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:19.144Z,1528881919.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:19.548Z,1528881919.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:19.951Z,1528881919.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:20.340Z,1528881920.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:20.739Z,1528881920.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:21.142Z,1528881921.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:21.540Z,1528881921.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:21.940Z,1528881921.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:22.344Z,1528881922.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:22.743Z,1528881922.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:23.169Z,1528881923.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:23.538Z,1528881923.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:23.940Z,1528881923.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:24.339Z,1528881924.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:24.737Z,1528881924.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:25.145Z,1528881925.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:25.547Z,1528881925.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:25.947Z,1528881925.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:26.335Z,1528881926.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:26.738Z,1528881926.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:27.136Z,1528881927.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:27.540Z,1528881927.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:27.938Z,1528881927.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:28.347Z,1528881928.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:28.752Z,1528881928.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:29.152Z,1528881929.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:29.539Z,1528881929.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:29.936Z,1528881929.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:30.339Z,1528881930.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:30.740Z,1528881930.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:31.148Z,1528881931.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:31.552Z,1528881931.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:31.948Z,1528881931.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:32.335Z,1528881932.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:32.737Z,1528881932.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:33.138Z,1528881933.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:33.539Z,1528881933.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:33.938Z,1528881933.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:34.352Z,1528881934.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:34.749Z,1528881934.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:35.152Z,1528881935.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:35.560Z,1528881935.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:35.932Z,1528881935.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:36.343Z,1528881936.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:36.736Z,1528881936.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:37.143Z,1528881937.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:37.572Z,1528881937.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:37.943Z,1528881937.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:38.336Z,1528881938.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:38.738Z,1528881938.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:39.138Z,1528881939.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:39.537Z,1528881939.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:39.935Z,1528881939.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:40.347Z,1528881940.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:40.746Z,1528881940.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:41.144Z,1528881941.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:41.541Z,1528881941.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:41.940Z,1528881941.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:42.340Z,1528881942.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:42.738Z,1528881942.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:43.147Z,1528881943.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:43.544Z,1528881943.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:43.945Z,1528881943.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:44.336Z,1528881944.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:44.736Z,1528881944.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:45.138Z,1528881945.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:45.540Z,1528881945.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:45.936Z,1528881945.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:46.355Z,1528881946.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:46.748Z,1528881946.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:47.148Z,1528881947.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:47.540Z,1528881947.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:47.939Z,1528881947.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:48.337Z,1528881948.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:48.740Z,1528881948.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:49.150Z,1528881949.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:49.547Z,1528881949.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:49.948Z,1528881949.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:50.339Z,1528881950.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:50.737Z,1528881950.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:51.141Z,1528881951.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:51.540Z,1528881951.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:51.936Z,1528881951.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:52.352Z,1528881952.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:52.747Z,1528881952.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:53.152Z,1528881953.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:53.539Z,1528881953.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:53.943Z,1528881953.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:54.337Z,1528881954.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:54.738Z,1528881954.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:55.149Z,1528881955.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:55.549Z,1528881955.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:55.950Z,1528881955.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:56.338Z,1528881956.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:56.740Z,1528881956.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:57.140Z,1528881957.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:57.542Z,1528881957.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:57.937Z,1528881957.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:58.349Z,1528881958.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:58.760Z,1528881958.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:59.144Z,1528881959.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:59.548Z,1528881959.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:25:59.949Z,1528881959.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:00.336Z,1528881960.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:00.741Z,1528881960.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:00.741Z,1528881960.741 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 120
2018-06-13T09:26:00.741Z,1528881960.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:26:00.743Z,1528881960.743 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:00.743Z,1528881960.743 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 120
2018-06-13T09:26:00.743Z,1528881960.743 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:26:00.745Z,1528881960.745 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:00.745Z,1528881960.745 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 120
2018-06-13T09:26:00.745Z,1528881960.745 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:26:00.817Z,1528881960.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:26:00.817Z,1528881960.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:26:00.818Z,1528881960.818 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:26:01.229Z,1528881961.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:26:01.229Z,1528881961.229 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 120
2018-06-13T09:26:01.230Z,1528881961.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:26:01.230Z,1528881961.230 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 120
2018-06-13T09:26:01.230Z,1528881961.230 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:26:01.230Z,1528881961.230 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 120
2018-06-13T09:26:01.550Z,1528881961.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:26:01.551Z,1528881961.551 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:26:01.551Z,1528881961.551 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:26:01.551Z,1528881961.551 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:26:01.552Z,1528881961.552 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:26:01.552Z,1528881961.552 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:26:01.552Z,1528881961.552 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:26:01.553Z,1528881961.553 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:26:01.553Z,1528881961.553 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:26:01.946Z,1528881961.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:26:01.947Z,1528881961.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:02.340Z,1528881962.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:26:02.341Z,1528881962.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:02.749Z,1528881962.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:26:02.750Z,1528881962.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:03.148Z,1528881963.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:26:03.148Z,1528881963.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:03.528Z,1528881963.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:26:03.529Z,1528881963.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:03.928Z,1528881963.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:26:03.929Z,1528881963.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:04.357Z,1528881964.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:26:04.358Z,1528881964.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:04.757Z,1528881964.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:26:04.758Z,1528881964.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:05.158Z,1528881965.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:26:05.159Z,1528881965.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:05.536Z,1528881965.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:26:05.553Z,1528881965.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:05.935Z,1528881965.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:26:05.936Z,1528881965.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:06.332Z,1528881966.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:26:06.334Z,1528881966.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:06.735Z,1528881966.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:26:06.736Z,1528881966.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:07.169Z,1528881967.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:26:07.170Z,1528881967.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:07.562Z,1528881967.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:26:07.563Z,1528881967.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:07.966Z,1528881967.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:26:07.967Z,1528881967.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:11.046Z,1528881971.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T09:26:11.047Z,1528881971.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:11.248Z,1528881971.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T09:26:11.249Z,1528881971.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:11.650Z,1528881971.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T09:26:11.651Z,1528881971.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:12.035Z,1528881972.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T09:26:12.036Z,1528881972.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:12.438Z,1528881972.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T09:26:12.439Z,1528881972.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:12.838Z,1528881972.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T09:26:12.839Z,1528881972.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:13.232Z,1528881973.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T09:26:13.233Z,1528881973.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:13.629Z,1528881973.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T09:26:13.630Z,1528881973.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:14.029Z,1528881974.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T09:26:14.031Z,1528881974.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:14.439Z,1528881974.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T09:26:14.440Z,1528881974.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:14.834Z,1528881974.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T09:26:14.835Z,1528881974.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:15.232Z,1528881975.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T09:26:15.233Z,1528881975.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:15.628Z,1528881975.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T09:26:15.629Z,1528881975.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:16.034Z,1528881976.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T09:26:16.035Z,1528881976.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:16.433Z,1528881976.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T09:26:16.434Z,1528881976.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:16.838Z,1528881976.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T09:26:16.839Z,1528881976.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:17.230Z,1528881977.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T09:26:17.231Z,1528881977.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:17.644Z,1528881977.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T09:26:17.645Z,1528881977.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:18.036Z,1528881978.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T09:26:18.037Z,1528881978.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:18.412Z,1528881978.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T09:26:18.429Z,1528881978.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:18.836Z,1528881978.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T09:26:18.841Z,1528881978.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:19.215Z,1528881979.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T09:26:19.216Z,1528881979.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:19.616Z,1528881979.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T09:26:19.618Z,1528881979.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:20.015Z,1528881980.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T09:26:20.015Z,1528881980.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:20.427Z,1528881980.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T09:26:20.428Z,1528881980.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:20.827Z,1528881980.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:21.227Z,1528881981.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:21.624Z,1528881981.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:22.022Z,1528881982.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:22.423Z,1528881982.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:22.819Z,1528881982.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:23.225Z,1528881983.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:23.631Z,1528881983.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:24.032Z,1528881984.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:24.420Z,1528881984.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:24.821Z,1528881984.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:25.219Z,1528881985.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:25.621Z,1528881985.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:26.023Z,1528881986.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:26.431Z,1528881986.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:26.830Z,1528881986.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:27.228Z,1528881987.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:27.623Z,1528881987.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:28.024Z,1528881988.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:28.428Z,1528881988.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:28.823Z,1528881988.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:29.229Z,1528881989.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:29.631Z,1528881989.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:30.029Z,1528881990.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:30.418Z,1528881990.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:30.831Z,1528881990.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:31.228Z,1528881991.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:31.624Z,1528881991.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:32.024Z,1528881992.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:32.433Z,1528881992.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:32.833Z,1528881992.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:33.233Z,1528881993.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:33.622Z,1528881993.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:34.024Z,1528881994.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:34.428Z,1528881994.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:34.824Z,1528881994.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:35.230Z,1528881995.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:35.644Z,1528881995.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:36.034Z,1528881996.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:36.423Z,1528881996.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:36.825Z,1528881996.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:37.222Z,1528881997.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:37.621Z,1528881997.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:38.023Z,1528881998.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:38.434Z,1528881998.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:38.833Z,1528881998.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:39.233Z,1528881999.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:39.625Z,1528881999.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:40.020Z,1528882000.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:40.420Z,1528882000.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:40.822Z,1528882000.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:41.233Z,1528882001.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:41.637Z,1528882001.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:42.037Z,1528882002.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:42.420Z,1528882002.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:42.839Z,1528882002.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:43.230Z,1528882003.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:43.626Z,1528882003.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:44.032Z,1528882004.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:44.383Z,1528882004.383 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T09:26:44.383Z,1528882004.383 [NAL9602] Data Fault, FailCount= 3
2018-06-13T09:26:44.383Z,1528882004.383 [NAL9602](ERROR): Data Fault
2018-06-13T09:26:44.416Z,1528882004.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:44.526Z,1528882004.526 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T09:26:44.778Z,1528882004.778 [NAL9602](INFO): Powering down
2018-06-13T09:26:44.813Z,1528882004.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:45.211Z,1528882005.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:45.624Z,1528882005.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:45.730Z,1528882005.730 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T09:26:45.730Z,1528882005.730 [NAL9602] No Fault, FailCount= 3
2018-06-13T09:26:46.015Z,1528882006.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:46.411Z,1528882006.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:46.816Z,1528882006.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:47.214Z,1528882007.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:47.611Z,1528882007.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:48.016Z,1528882008.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:48.416Z,1528882008.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:48.816Z,1528882008.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:49.216Z,1528882009.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:49.614Z,1528882009.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:50.011Z,1528882010.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:50.420Z,1528882010.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:50.814Z,1528882010.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:51.216Z,1528882011.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:51.612Z,1528882011.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:52.015Z,1528882012.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:52.415Z,1528882012.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:52.812Z,1528882012.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:53.215Z,1528882013.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:53.616Z,1528882013.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:54.020Z,1528882014.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:54.414Z,1528882014.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:54.811Z,1528882014.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:55.217Z,1528882015.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:55.615Z,1528882015.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:56.020Z,1528882016.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:56.420Z,1528882016.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:56.814Z,1528882016.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:57.212Z,1528882017.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:57.620Z,1528882017.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:58.015Z,1528882018.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:58.418Z,1528882018.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:58.819Z,1528882018.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:59.215Z,1528882019.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:26:59.614Z,1528882019.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:00.019Z,1528882020.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:00.415Z,1528882020.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:00.819Z,1528882020.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:01.214Z,1528882021.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:01.615Z,1528882021.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:02.017Z,1528882022.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:02.416Z,1528882022.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:02.816Z,1528882022.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:03.220Z,1528882023.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:03.614Z,1528882023.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:04.016Z,1528882024.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:04.415Z,1528882024.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:04.815Z,1528882024.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:05.228Z,1528882025.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:05.617Z,1528882025.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:06.015Z,1528882026.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:06.424Z,1528882026.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:06.818Z,1528882026.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:07.214Z,1528882027.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:07.620Z,1528882027.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:08.020Z,1528882028.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:11.127Z,1528882031.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:11.130Z,1528882031.130 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T09:22:10.8Z
2018-06-13T09:27:11.130Z,1528882031.130 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T09:27:11.130Z,1528882031.130 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T09:27:11.308Z,1528882031.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:12.457Z,1528882032.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:12.607Z,1528882032.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:13.011Z,1528882033.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:13.416Z,1528882033.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:13.802Z,1528882033.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:14.214Z,1528882034.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:14.616Z,1528882034.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:17.783Z,1528882037.783 [NAL9602](INFO): Powering up NAL9602
2018-06-13T09:27:17.828Z,1528882037.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:17.909Z,1528882037.909 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0140.lzma
2018-06-13T09:27:17.984Z,1528882037.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:18.360Z,1528882038.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:18.710Z,1528882038.710 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0140.lzma.bak
2018-06-13T09:27:18.710Z,1528882038.710 [DataOverHttps](INFO): SBD MOMSN=8328977
2018-06-13T09:27:18.768Z,1528882038.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:20.664Z,1528882040.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:20.820Z,1528882040.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:21.212Z,1528882041.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:24.336Z,1528882044.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:24.520Z,1528882044.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:24.888Z,1528882044.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:25.287Z,1528882045.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:25.684Z,1528882045.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:26.092Z,1528882046.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:30.617Z,1528882050.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:30.710Z,1528882050.710 [DataOverHttps](INFO): Sending 328 bytes from file Logs/20180613T032335/Express0141.lzma
2018-06-13T09:27:30.795Z,1528882050.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:31.118Z,1528882051.118 [NAL9602](INFO): NAL9602 initialized
2018-06-13T09:27:31.170Z,1528882051.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:31.510Z,1528882051.510 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0141.lzma.bak
2018-06-13T09:27:31.510Z,1528882051.510 [DataOverHttps](INFO): SBD MOMSN=8328979
2018-06-13T09:27:31.573Z,1528882051.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:33.466Z,1528882053.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:33.469Z,1528882053.469 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T09:27:33.469Z,1528882053.469 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T09:27:33.469Z,1528882053.469 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T09:27:33.636Z,1528882053.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:34.027Z,1528882054.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:37.139Z,1528882057.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:37.320Z,1528882057.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:37.717Z,1528882057.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:38.113Z,1528882058.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:38.515Z,1528882058.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:38.870Z,1528882058.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:38.888Z,1528882058.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:39.267Z,1528882059.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:39.289Z,1528882059.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:39.672Z,1528882059.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:39.692Z,1528882059.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:40.073Z,1528882060.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:40.091Z,1528882060.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:40.474Z,1528882060.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:40.496Z,1528882060.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:40.881Z,1528882060.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:40.899Z,1528882060.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:41.282Z,1528882061.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:41.299Z,1528882061.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:41.670Z,1528882061.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:41.687Z,1528882061.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:42.072Z,1528882062.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:42.090Z,1528882062.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:42.482Z,1528882062.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:42.500Z,1528882062.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:42.881Z,1528882062.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:42.899Z,1528882062.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:43.278Z,1528882063.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:43.295Z,1528882063.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:43.673Z,1528882063.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:43.691Z,1528882063.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:44.067Z,1528882064.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:44.095Z,1528882064.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:44.477Z,1528882064.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:44.495Z,1528882064.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:44.882Z,1528882064.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:44.899Z,1528882064.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:45.278Z,1528882065.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:45.296Z,1528882065.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:45.672Z,1528882065.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:45.704Z,1528882065.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:46.074Z,1528882066.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:46.092Z,1528882066.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:46.479Z,1528882066.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:46.504Z,1528882066.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:46.884Z,1528882066.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:46.908Z,1528882066.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:47.283Z,1528882067.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:47.301Z,1528882067.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:47.668Z,1528882067.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:47.694Z,1528882067.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:48.071Z,1528882068.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:48.104Z,1528882068.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:48.484Z,1528882068.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:48.508Z,1528882068.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:48.882Z,1528882068.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:48.901Z,1528882068.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:49.283Z,1528882069.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:49.304Z,1528882069.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:49.664Z,1528882069.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:49.693Z,1528882069.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:50.073Z,1528882070.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:50.091Z,1528882070.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:50.479Z,1528882070.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:50.509Z,1528882070.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:50.888Z,1528882070.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:50.907Z,1528882070.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:51.279Z,1528882071.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:51.298Z,1528882071.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:51.663Z,1528882071.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:51.702Z,1528882071.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:52.063Z,1528882072.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:52.097Z,1528882072.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:52.477Z,1528882072.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:52.512Z,1528882072.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:52.888Z,1528882072.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:52.907Z,1528882072.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:53.288Z,1528882073.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:53.307Z,1528882073.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:53.663Z,1528882073.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:53.680Z,1528882073.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:54.067Z,1528882074.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:54.084Z,1528882074.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:54.476Z,1528882074.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:54.520Z,1528882074.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:54.881Z,1528882074.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:54.908Z,1528882074.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:55.277Z,1528882075.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:55.311Z,1528882075.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:55.667Z,1528882075.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:55.685Z,1528882075.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:56.071Z,1528882076.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:56.088Z,1528882076.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:56.482Z,1528882076.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:56.514Z,1528882076.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:56.881Z,1528882076.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:56.915Z,1528882076.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:57.277Z,1528882077.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:57.311Z,1528882077.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:57.671Z,1528882077.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:57.688Z,1528882077.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:58.066Z,1528882078.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:58.088Z,1528882078.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:58.477Z,1528882078.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:58.496Z,1528882078.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:58.885Z,1528882078.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:58.923Z,1528882078.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:59.281Z,1528882079.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:59.304Z,1528882079.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:27:59.673Z,1528882079.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:27:59.696Z,1528882079.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:00.073Z,1528882080.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:00.096Z,1528882080.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:00.481Z,1528882080.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:00.499Z,1528882080.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:00.878Z,1528882080.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:00.896Z,1528882080.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:01.274Z,1528882081.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:01.308Z,1528882081.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:01.675Z,1528882081.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:01.745Z,1528882081.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:02.069Z,1528882082.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:02.087Z,1528882082.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:02.498Z,1528882082.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:02.553Z,1528882082.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:02.901Z,1528882082.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:02.920Z,1528882082.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:03.279Z,1528882083.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:03.406Z,1528882083.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:03.663Z,1528882083.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:03.783Z,1528882083.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:04.063Z,1528882084.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:04.081Z,1528882084.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:04.463Z,1528882084.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:04.509Z,1528882084.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:04.877Z,1528882084.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:04.912Z,1528882084.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:05.277Z,1528882085.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:05.321Z,1528882085.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:05.673Z,1528882085.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:05.711Z,1528882085.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:06.067Z,1528882086.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:06.085Z,1528882086.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:06.467Z,1528882086.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:06.484Z,1528882086.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:06.872Z,1528882086.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:06.890Z,1528882086.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:07.270Z,1528882087.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:07.287Z,1528882087.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:07.681Z,1528882087.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:07.719Z,1528882087.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:08.081Z,1528882088.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:08.099Z,1528882088.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:08.478Z,1528882088.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:08.495Z,1528882088.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:08.870Z,1528882088.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:08.887Z,1528882088.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:09.272Z,1528882089.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:09.290Z,1528882089.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:09.672Z,1528882089.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:09.696Z,1528882089.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:10.070Z,1528882090.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:10.092Z,1528882090.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:10.472Z,1528882090.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:10.496Z,1528882090.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:10.877Z,1528882090.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:10.895Z,1528882090.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:11.281Z,1528882091.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:11.298Z,1528882091.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:11.682Z,1528882091.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:11.699Z,1528882091.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:12.072Z,1528882092.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:12.089Z,1528882092.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:12.472Z,1528882092.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:12.490Z,1528882092.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:12.872Z,1528882092.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:12.891Z,1528882092.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:13.269Z,1528882093.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:13.325Z,1528882093.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:13.681Z,1528882093.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:13.699Z,1528882093.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:14.081Z,1528882094.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:14.099Z,1528882094.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:14.478Z,1528882094.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:14.500Z,1528882094.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:14.874Z,1528882094.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:14.891Z,1528882094.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:15.273Z,1528882095.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:15.291Z,1528882095.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:15.674Z,1528882095.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:15.692Z,1528882095.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:16.070Z,1528882096.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:16.092Z,1528882096.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:16.473Z,1528882096.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:16.491Z,1528882096.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:16.878Z,1528882096.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:16.900Z,1528882096.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:17.281Z,1528882097.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:17.299Z,1528882097.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:17.679Z,1528882097.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:17.696Z,1528882097.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:18.073Z,1528882098.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:18.090Z,1528882098.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:18.474Z,1528882098.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:18.491Z,1528882098.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:18.866Z,1528882098.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:18.892Z,1528882098.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:19.271Z,1528882099.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:19.293Z,1528882099.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:19.682Z,1528882099.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:19.705Z,1528882099.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:20.082Z,1528882100.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:20.104Z,1528882100.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:20.483Z,1528882100.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:20.500Z,1528882100.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:20.874Z,1528882100.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:20.891Z,1528882100.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:21.273Z,1528882101.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:21.291Z,1528882101.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:21.671Z,1528882101.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:21.693Z,1528882101.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:22.074Z,1528882102.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:22.092Z,1528882102.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:22.474Z,1528882102.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:22.492Z,1528882102.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:22.882Z,1528882102.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:22.899Z,1528882102.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:23.283Z,1528882103.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:23.308Z,1528882103.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:23.682Z,1528882103.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:23.700Z,1528882103.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:24.071Z,1528882104.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:24.093Z,1528882104.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:24.471Z,1528882104.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:24.506Z,1528882104.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:24.874Z,1528882104.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:24.896Z,1528882104.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:25.273Z,1528882105.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:25.291Z,1528882105.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:25.684Z,1528882105.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:25.708Z,1528882105.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:26.082Z,1528882106.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:26.104Z,1528882106.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:26.483Z,1528882106.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:26.501Z,1528882106.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:26.871Z,1528882106.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:26.896Z,1528882106.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:27.267Z,1528882107.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:27.300Z,1528882107.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:27.671Z,1528882107.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:27.695Z,1528882107.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:28.072Z,1528882108.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:28.106Z,1528882108.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:28.474Z,1528882108.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:28.496Z,1528882108.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:28.883Z,1528882108.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:28.900Z,1528882108.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:29.284Z,1528882109.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:29.302Z,1528882109.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:29.683Z,1528882109.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:29.701Z,1528882109.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:30.071Z,1528882110.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:30.095Z,1528882110.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:30.474Z,1528882110.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:30.492Z,1528882110.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:30.874Z,1528882110.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:30.892Z,1528882110.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:31.271Z,1528882111.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:31.295Z,1528882111.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:31.682Z,1528882111.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:31.701Z,1528882111.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:32.083Z,1528882112.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:32.101Z,1528882112.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:32.482Z,1528882112.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:32.499Z,1528882112.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:32.874Z,1528882112.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:32.892Z,1528882112.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:33.266Z,1528882113.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:33.290Z,1528882113.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:33.677Z,1528882113.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:33.700Z,1528882113.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:34.079Z,1528882114.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:34.104Z,1528882114.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:37.184Z,1528882117.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:37.202Z,1528882117.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:37.339Z,1528882117.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:37.383Z,1528882117.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:37.733Z,1528882117.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:37.756Z,1528882117.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:38.132Z,1528882118.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:38.158Z,1528882118.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:38.515Z,1528882118.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:38.551Z,1528882118.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:38.915Z,1528882118.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:38.958Z,1528882118.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:39.311Z,1528882119.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:39.347Z,1528882119.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:39.724Z,1528882119.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:39.750Z,1528882119.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:40.136Z,1528882120.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:40.154Z,1528882120.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:40.531Z,1528882120.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:40.549Z,1528882120.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:40.915Z,1528882120.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:40.951Z,1528882120.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:41.315Z,1528882121.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:41.350Z,1528882121.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:41.715Z,1528882121.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:41.742Z,1528882121.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:42.116Z,1528882122.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:42.144Z,1528882122.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:42.515Z,1528882122.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:42.550Z,1528882122.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:42.921Z,1528882122.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:42.956Z,1528882122.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:43.335Z,1528882123.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:43.353Z,1528882123.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:43.741Z,1528882123.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:43.759Z,1528882123.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:44.112Z,1528882124.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:44.146Z,1528882124.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:44.516Z,1528882124.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:44.556Z,1528882124.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:44.916Z,1528882124.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:44.952Z,1528882124.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:45.315Z,1528882125.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:45.355Z,1528882125.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:45.726Z,1528882125.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:45.760Z,1528882125.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:46.129Z,1528882126.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:46.158Z,1528882126.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:46.522Z,1528882126.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:46.555Z,1528882126.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:46.915Z,1528882126.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:46.956Z,1528882126.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:47.315Z,1528882127.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:47.350Z,1528882127.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:47.711Z,1528882127.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:47.730Z,1528882127.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:48.115Z,1528882128.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:48.132Z,1528882128.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:48.519Z,1528882128.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:48.538Z,1528882128.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:48.925Z,1528882128.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:48.944Z,1528882128.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:49.329Z,1528882129.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:49.347Z,1528882129.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:49.733Z,1528882129.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:49.775Z,1528882129.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:50.120Z,1528882130.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:50.138Z,1528882130.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:50.521Z,1528882130.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:50.538Z,1528882130.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:50.920Z,1528882130.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:50.954Z,1528882130.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:51.315Z,1528882131.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:51.338Z,1528882131.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:51.727Z,1528882131.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:51.744Z,1528882131.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:52.126Z,1528882132.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:52.144Z,1528882132.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:52.526Z,1528882132.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:52.544Z,1528882132.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:52.919Z,1528882132.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:52.941Z,1528882132.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:53.322Z,1528882133.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:53.339Z,1528882133.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:53.715Z,1528882133.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:53.739Z,1528882133.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:54.120Z,1528882134.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:54.151Z,1528882134.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:54.519Z,1528882134.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:54.552Z,1528882134.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:54.925Z,1528882134.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:54.943Z,1528882134.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:55.329Z,1528882135.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:55.347Z,1528882135.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:55.730Z,1528882135.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:55.748Z,1528882135.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:56.115Z,1528882136.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:56.138Z,1528882136.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:56.519Z,1528882136.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:56.550Z,1528882136.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:56.922Z,1528882136.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:56.940Z,1528882136.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:57.321Z,1528882137.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:57.344Z,1528882137.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:57.726Z,1528882137.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:57.748Z,1528882137.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:58.129Z,1528882138.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:58.147Z,1528882138.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:58.527Z,1528882138.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:58.544Z,1528882138.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:58.914Z,1528882138.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:58.943Z,1528882138.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:59.322Z,1528882139.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:59.340Z,1528882139.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:28:59.721Z,1528882139.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:28:59.739Z,1528882139.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:00.122Z,1528882140.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:00.139Z,1528882140.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:00.519Z,1528882140.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:00.544Z,1528882140.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:00.926Z,1528882140.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:00.944Z,1528882140.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:01.330Z,1528882141.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:01.352Z,1528882141.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:01.731Z,1528882141.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:01.748Z,1528882141.748 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:01.748Z,1528882141.748 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 121
2018-06-13T09:29:01.748Z,1528882141.748 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:29:01.750Z,1528882141.750 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:01.751Z,1528882141.751 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 121
2018-06-13T09:29:01.751Z,1528882141.751 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:29:01.752Z,1528882141.752 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:01.752Z,1528882141.752 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 121
2018-06-13T09:29:01.752Z,1528882141.752 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:29:01.841Z,1528882141.841 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:29:01.841Z,1528882141.841 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:29:01.842Z,1528882141.842 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:29:02.115Z,1528882142.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:02.230Z,1528882142.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:29:02.231Z,1528882142.231 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 121
2018-06-13T09:29:02.231Z,1528882142.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:29:02.231Z,1528882142.231 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 121
2018-06-13T09:29:02.232Z,1528882142.232 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:29:02.232Z,1528882142.232 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 121
2018-06-13T09:29:02.511Z,1528882142.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:02.539Z,1528882142.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:29:02.540Z,1528882142.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:29:02.540Z,1528882142.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:29:02.540Z,1528882142.540 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:29:02.545Z,1528882142.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:29:02.545Z,1528882142.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:29:02.546Z,1528882142.546 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:29:02.546Z,1528882142.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:29:02.546Z,1528882142.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:29:02.916Z,1528882142.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:02.949Z,1528882142.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:29:02.950Z,1528882142.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:03.316Z,1528882143.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:03.349Z,1528882143.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:29:03.350Z,1528882143.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:03.729Z,1528882143.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:03.756Z,1528882143.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:29:03.757Z,1528882143.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:04.129Z,1528882144.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:04.158Z,1528882144.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:29:04.159Z,1528882144.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:04.526Z,1528882144.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:04.559Z,1528882144.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:29:04.560Z,1528882144.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:04.915Z,1528882144.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:04.956Z,1528882144.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:29:04.961Z,1528882144.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:05.319Z,1528882145.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:05.338Z,1528882145.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:29:05.339Z,1528882145.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:05.715Z,1528882145.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:05.732Z,1528882145.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:29:05.733Z,1528882145.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:06.119Z,1528882146.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:06.137Z,1528882146.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:29:06.138Z,1528882146.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:06.514Z,1528882146.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:06.540Z,1528882146.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:29:06.545Z,1528882146.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:06.926Z,1528882146.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:06.943Z,1528882146.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:29:06.944Z,1528882146.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:07.329Z,1528882147.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:07.347Z,1528882147.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:29:07.348Z,1528882147.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:07.729Z,1528882147.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:07.747Z,1528882147.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:29:07.748Z,1528882147.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:08.115Z,1528882148.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:08.140Z,1528882148.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:29:08.141Z,1528882148.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:08.519Z,1528882148.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:08.544Z,1528882148.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:29:08.549Z,1528882148.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:08.914Z,1528882148.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:08.952Z,1528882148.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:29:08.957Z,1528882148.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:09.315Z,1528882149.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:09.343Z,1528882149.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:29:09.344Z,1528882149.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:09.735Z,1528882149.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:09.752Z,1528882149.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:29:09.753Z,1528882149.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:10.134Z,1528882150.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:10.167Z,1528882150.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:29:10.168Z,1528882150.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:10.529Z,1528882150.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:10.546Z,1528882150.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:29:10.547Z,1528882150.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:10.916Z,1528882150.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:10.943Z,1528882150.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:29:10.944Z,1528882150.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:11.316Z,1528882151.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:11.345Z,1528882151.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:29:11.346Z,1528882151.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:11.716Z,1528882151.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:11.748Z,1528882151.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:29:11.749Z,1528882151.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:12.116Z,1528882152.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:12.156Z,1528882152.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:29:12.161Z,1528882152.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:12.515Z,1528882152.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:12.552Z,1528882152.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:29:12.554Z,1528882152.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:12.938Z,1528882152.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:12.955Z,1528882152.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:29:12.956Z,1528882152.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:13.335Z,1528882153.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:13.352Z,1528882153.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:29:13.353Z,1528882153.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:13.737Z,1528882153.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:13.755Z,1528882153.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:29:13.756Z,1528882153.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:14.115Z,1528882154.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:14.148Z,1528882154.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:29:14.154Z,1528882154.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:14.515Z,1528882154.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:14.532Z,1528882154.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:29:14.549Z,1528882154.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:14.917Z,1528882154.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:14.935Z,1528882154.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:29:14.936Z,1528882154.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:15.315Z,1528882155.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:15.336Z,1528882155.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:29:15.337Z,1528882155.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:15.729Z,1528882155.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:15.763Z,1528882155.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:29:15.764Z,1528882155.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:16.129Z,1528882156.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:16.147Z,1528882156.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:29:16.148Z,1528882156.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:16.526Z,1528882156.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:16.543Z,1528882156.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:29:16.544Z,1528882156.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:16.920Z,1528882156.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:16.939Z,1528882156.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:29:16.940Z,1528882156.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:17.321Z,1528882157.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:17.339Z,1528882157.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:29:17.340Z,1528882157.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:17.720Z,1528882157.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:17.738Z,1528882157.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:29:17.739Z,1528882157.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:18.120Z,1528882158.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:18.137Z,1528882158.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:29:18.138Z,1528882158.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:18.522Z,1528882158.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:18.539Z,1528882158.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:29:18.540Z,1528882158.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:18.926Z,1528882158.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:18.943Z,1528882158.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:29:18.944Z,1528882158.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:19.329Z,1528882159.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:19.346Z,1528882159.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:29:19.347Z,1528882159.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:19.729Z,1528882159.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:19.747Z,1528882159.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:29:19.748Z,1528882159.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:20.115Z,1528882160.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:20.138Z,1528882160.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:29:20.139Z,1528882160.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:20.521Z,1528882160.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:20.539Z,1528882160.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:29:20.540Z,1528882160.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:20.923Z,1528882160.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:20.941Z,1528882160.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:29:20.942Z,1528882160.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:21.315Z,1528882161.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:21.338Z,1528882161.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:29:21.339Z,1528882161.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:21.730Z,1528882161.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:21.748Z,1528882161.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T09:29:21.749Z,1528882161.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:22.129Z,1528882162.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:22.147Z,1528882162.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:22.526Z,1528882162.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:22.544Z,1528882162.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:22.919Z,1528882162.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:22.944Z,1528882162.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:23.322Z,1528882163.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:23.353Z,1528882163.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:23.722Z,1528882163.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:23.745Z,1528882163.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:24.122Z,1528882164.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:24.144Z,1528882164.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:24.523Z,1528882164.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:24.542Z,1528882164.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:24.927Z,1528882164.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:24.945Z,1528882164.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:25.330Z,1528882165.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:25.352Z,1528882165.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:25.731Z,1528882165.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:25.756Z,1528882165.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:26.121Z,1528882166.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:26.139Z,1528882166.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:26.519Z,1528882166.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:26.556Z,1528882166.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:26.923Z,1528882166.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:26.949Z,1528882166.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:27.315Z,1528882167.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:27.338Z,1528882167.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:27.730Z,1528882167.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:27.748Z,1528882167.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:28.131Z,1528882168.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:28.148Z,1528882168.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:28.530Z,1528882168.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:28.556Z,1528882168.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:28.921Z,1528882168.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:28.939Z,1528882168.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:29.323Z,1528882169.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:29.341Z,1528882169.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:29.711Z,1528882169.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:29.749Z,1528882169.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:30.116Z,1528882170.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:30.155Z,1528882170.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:30.515Z,1528882170.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:30.544Z,1528882170.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:30.931Z,1528882170.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:30.949Z,1528882170.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:31.334Z,1528882171.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:31.365Z,1528882171.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:31.736Z,1528882171.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:31.754Z,1528882171.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:32.111Z,1528882172.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:32.147Z,1528882172.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:32.515Z,1528882172.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:32.544Z,1528882172.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:32.916Z,1528882172.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:32.947Z,1528882172.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:33.311Z,1528882173.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:33.345Z,1528882173.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:33.735Z,1528882173.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:33.753Z,1528882173.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:34.141Z,1528882174.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:34.159Z,1528882174.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:37.246Z,1528882177.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:37.264Z,1528882177.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:37.372Z,1528882177.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:37.421Z,1528882177.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:37.771Z,1528882177.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:37.801Z,1528882177.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:38.169Z,1528882178.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:38.214Z,1528882178.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:38.567Z,1528882178.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:38.603Z,1528882178.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:38.988Z,1528882178.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:39.007Z,1528882179.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:39.387Z,1528882179.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:39.406Z,1528882179.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:39.784Z,1528882179.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:39.802Z,1528882179.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:40.171Z,1528882180.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:40.201Z,1528882180.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:40.567Z,1528882180.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:40.600Z,1528882180.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:40.968Z,1528882180.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:41.003Z,1528882181.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:41.367Z,1528882181.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:41.402Z,1528882181.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:41.784Z,1528882181.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:41.802Z,1528882181.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:42.188Z,1528882182.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:42.207Z,1528882182.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:42.584Z,1528882182.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:42.603Z,1528882182.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:42.967Z,1528882182.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:42.000Z,1528882183.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:43.367Z,1528882183.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:43.401Z,1528882183.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:43.767Z,1528882183.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:43.802Z,1528882183.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:44.168Z,1528882184.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:44.203Z,1528882184.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:44.567Z,1528882184.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:44.584Z,1528882184.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:44.981Z,1528882184.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:45.011Z,1528882185.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:45.381Z,1528882185.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:45.409Z,1528882185.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:45.777Z,1528882185.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:45.815Z,1528882185.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:46.171Z,1528882186.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:46.189Z,1528882186.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:46.566Z,1528882186.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:46.584Z,1528882186.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:46.971Z,1528882186.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:46.989Z,1528882186.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:47.370Z,1528882187.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:47.388Z,1528882187.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:47.781Z,1528882187.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:47.819Z,1528882187.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:48.181Z,1528882188.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:48.200Z,1528882188.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:48.581Z,1528882188.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:48.600Z,1528882188.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:48.967Z,1528882188.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:49.001Z,1528882189.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:49.371Z,1528882189.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:49.393Z,1528882189.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:49.774Z,1528882189.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:49.792Z,1528882189.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:50.174Z,1528882190.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:50.191Z,1528882190.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:50.572Z,1528882190.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:50.590Z,1528882190.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:50.981Z,1528882190.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:51.001Z,1528882191.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:51.378Z,1528882191.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:51.401Z,1528882191.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:51.781Z,1528882191.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:51.800Z,1528882191.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:52.174Z,1528882192.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:52.192Z,1528882192.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:52.567Z,1528882192.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:52.590Z,1528882192.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:52.971Z,1528882192.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:53.004Z,1528882193.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:53.374Z,1528882193.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:53.392Z,1528882193.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:53.780Z,1528882193.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:53.798Z,1528882193.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:54.181Z,1528882194.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:54.199Z,1528882194.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:54.581Z,1528882194.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:54.600Z,1528882194.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:54.970Z,1528882194.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:54.988Z,1528882194.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:55.375Z,1528882195.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:55.392Z,1528882195.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:55.771Z,1528882195.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:55.798Z,1528882195.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:56.164Z,1528882196.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:56.194Z,1528882196.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:56.579Z,1528882196.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:56.597Z,1528882196.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:56.985Z,1528882196.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:57.003Z,1528882197.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:57.384Z,1528882197.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:57.404Z,1528882197.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:57.784Z,1528882197.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:57.803Z,1528882197.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:58.174Z,1528882198.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:58.193Z,1528882198.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:58.564Z,1528882198.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:58.608Z,1528882198.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:58.968Z,1528882198.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:58.994Z,1528882198.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:59.367Z,1528882199.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:59.384Z,1528882199.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:29:59.777Z,1528882199.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:29:59.814Z,1528882199.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:00.181Z,1528882200.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:00.206Z,1528882200.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:00.582Z,1528882200.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:00.612Z,1528882200.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:00.971Z,1528882200.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:01.005Z,1528882201.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:01.371Z,1528882201.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:01.416Z,1528882201.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:01.770Z,1528882201.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:01.787Z,1528882201.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:02.167Z,1528882202.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:02.184Z,1528882202.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:02.570Z,1528882202.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:02.588Z,1528882202.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:02.981Z,1528882202.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:03.023Z,1528882203.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:03.377Z,1528882203.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:03.395Z,1528882203.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:03.781Z,1528882203.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:03.799Z,1528882203.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:04.171Z,1528882204.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:04.188Z,1528882204.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:04.567Z,1528882204.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:04.599Z,1528882204.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:04.973Z,1528882204.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:04.991Z,1528882204.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:05.374Z,1528882205.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:05.399Z,1528882205.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:05.778Z,1528882205.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:05.796Z,1528882205.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:06.182Z,1528882206.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:06.221Z,1528882206.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:06.579Z,1528882206.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:06.596Z,1528882206.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:06.967Z,1528882206.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:06.990Z,1528882206.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:07.371Z,1528882207.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:07.394Z,1528882207.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:07.773Z,1528882207.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:07.791Z,1528882207.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:08.174Z,1528882208.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:08.192Z,1528882208.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:08.571Z,1528882208.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:08.593Z,1528882208.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:08.978Z,1528882208.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:08.996Z,1528882208.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:09.378Z,1528882209.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:09.401Z,1528882209.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:09.778Z,1528882209.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:09.801Z,1528882209.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:10.175Z,1528882210.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:10.192Z,1528882210.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:10.573Z,1528882210.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:10.590Z,1528882210.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:10.974Z,1528882210.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:10.992Z,1528882210.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:11.369Z,1528882211.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:11.387Z,1528882211.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:11.776Z,1528882211.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:11.813Z,1528882211.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:12.182Z,1528882212.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:12.212Z,1528882212.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:12.583Z,1528882212.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:12.604Z,1528882212.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:12.973Z,1528882212.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:12.991Z,1528882212.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:13.371Z,1528882213.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:13.405Z,1528882213.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:13.763Z,1528882213.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:13.791Z,1528882213.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:14.168Z,1528882214.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:14.195Z,1528882214.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:14.567Z,1528882214.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:14.603Z,1528882214.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:14.988Z,1528882214.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:15.006Z,1528882215.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:15.387Z,1528882215.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:15.405Z,1528882215.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:15.783Z,1528882215.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:15.802Z,1528882215.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:16.163Z,1528882216.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:16.191Z,1528882216.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:16.567Z,1528882216.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:16.604Z,1528882216.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:16.968Z,1528882216.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:17.004Z,1528882217.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:17.367Z,1528882217.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:17.404Z,1528882217.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:17.784Z,1528882217.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:17.805Z,1528882217.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:18.181Z,1528882218.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:18.214Z,1528882218.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:18.584Z,1528882218.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:18.602Z,1528882218.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:18.967Z,1528882218.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:19.001Z,1528882219.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:19.367Z,1528882219.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:19.405Z,1528882219.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:19.771Z,1528882219.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:19.800Z,1528882219.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:20.168Z,1528882220.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:20.199Z,1528882220.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:20.567Z,1528882220.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:20.599Z,1528882220.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:20.988Z,1528882220.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:21.007Z,1528882221.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:21.389Z,1528882221.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:21.407Z,1528882221.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:21.782Z,1528882221.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:21.806Z,1528882221.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:22.167Z,1528882222.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:22.201Z,1528882222.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:22.567Z,1528882222.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:22.599Z,1528882222.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:22.968Z,1528882222.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:22.999Z,1528882222.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:23.367Z,1528882223.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:23.400Z,1528882223.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:23.788Z,1528882223.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:23.807Z,1528882223.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:24.186Z,1528882224.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:24.204Z,1528882224.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:24.593Z,1528882224.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:24.616Z,1528882224.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:24.967Z,1528882224.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:24.000Z,1528882225.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:25.367Z,1528882225.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:25.399Z,1528882225.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:25.767Z,1528882225.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:25.800Z,1528882225.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:26.168Z,1528882226.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:26.200Z,1528882226.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:26.567Z,1528882226.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:26.604Z,1528882226.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:26.987Z,1528882226.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:27.017Z,1528882227.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:27.381Z,1528882227.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:27.409Z,1528882227.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:27.777Z,1528882227.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:27.815Z,1528882227.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:28.171Z,1528882228.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:28.216Z,1528882228.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:28.570Z,1528882228.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:28.589Z,1528882228.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:28.971Z,1528882228.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:28.988Z,1528882228.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:29.372Z,1528882229.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:29.389Z,1528882229.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:29.781Z,1528882229.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:29.815Z,1528882229.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:30.181Z,1528882230.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:30.199Z,1528882230.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:30.581Z,1528882230.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:30.600Z,1528882230.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:30.972Z,1528882230.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:30.990Z,1528882230.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:31.372Z,1528882231.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:31.405Z,1528882231.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:31.774Z,1528882231.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:31.796Z,1528882231.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:32.174Z,1528882232.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:32.191Z,1528882232.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:32.572Z,1528882232.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:32.590Z,1528882232.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:32.985Z,1528882232.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:33.004Z,1528882233.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:33.379Z,1528882233.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:33.398Z,1528882233.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:33.785Z,1528882233.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:33.804Z,1528882233.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:34.175Z,1528882234.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:34.193Z,1528882234.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:37.296Z,1528882237.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:37.324Z,1528882237.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:37.440Z,1528882237.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:37.488Z,1528882237.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:37.868Z,1528882237.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:37.886Z,1528882237.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:38.267Z,1528882238.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:38.284Z,1528882238.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:38.654Z,1528882238.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:38.689Z,1528882238.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:39.043Z,1528882239.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:39.081Z,1528882239.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:39.439Z,1528882239.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:39.458Z,1528882239.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:39.843Z,1528882239.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:39.860Z,1528882239.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:40.247Z,1528882240.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:40.289Z,1528882240.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:40.647Z,1528882240.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:40.687Z,1528882240.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:41.057Z,1528882241.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:41.085Z,1528882241.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:41.458Z,1528882241.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:41.495Z,1528882241.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:41.850Z,1528882241.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:41.887Z,1528882241.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:42.243Z,1528882242.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:42.261Z,1528882242.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:42.644Z,1528882242.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:42.674Z,1528882242.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:43.051Z,1528882243.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:43.068Z,1528882243.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:43.448Z,1528882243.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:43.467Z,1528882243.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:43.858Z,1528882243.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:43.880Z,1528882243.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:44.259Z,1528882244.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:44.284Z,1528882244.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:44.659Z,1528882244.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:44.684Z,1528882244.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:45.050Z,1528882245.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:45.081Z,1528882245.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:45.443Z,1528882245.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:45.466Z,1528882245.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:45.847Z,1528882245.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:45.870Z,1528882245.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:46.251Z,1528882246.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:46.270Z,1528882246.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:46.649Z,1528882246.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:46.667Z,1528882246.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:47.059Z,1528882247.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:47.077Z,1528882247.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:47.459Z,1528882247.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:47.477Z,1528882247.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:47.854Z,1528882247.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:47.885Z,1528882247.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:48.249Z,1528882248.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:48.267Z,1528882248.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:48.647Z,1528882248.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:48.681Z,1528882248.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:49.052Z,1528882249.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:49.070Z,1528882249.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:49.443Z,1528882249.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:49.476Z,1528882249.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:49.867Z,1528882249.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:49.885Z,1528882249.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:50.259Z,1528882250.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:50.277Z,1528882250.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:50.660Z,1528882250.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:50.684Z,1528882250.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:51.044Z,1528882251.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:51.087Z,1528882251.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:51.443Z,1528882251.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:51.471Z,1528882251.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:51.843Z,1528882251.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:51.871Z,1528882251.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:52.244Z,1528882252.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:52.286Z,1528882252.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:52.643Z,1528882252.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:52.671Z,1528882252.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:53.061Z,1528882253.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:53.080Z,1528882253.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:53.465Z,1528882253.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:53.483Z,1528882253.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:53.860Z,1528882253.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:53.878Z,1528882253.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:54.243Z,1528882254.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:54.270Z,1528882254.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:54.647Z,1528882254.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:54.676Z,1528882254.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:55.044Z,1528882255.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:55.078Z,1528882255.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:55.443Z,1528882255.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:55.470Z,1528882255.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:55.865Z,1528882255.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:55.883Z,1528882255.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:56.255Z,1528882256.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:56.280Z,1528882256.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:56.660Z,1528882256.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:56.678Z,1528882256.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:57.043Z,1528882257.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:57.072Z,1528882257.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:57.443Z,1528882257.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:57.470Z,1528882257.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:57.843Z,1528882257.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:57.877Z,1528882257.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:58.244Z,1528882258.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:58.284Z,1528882258.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:58.640Z,1528882258.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:58.680Z,1528882258.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:59.060Z,1528882259.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:59.078Z,1528882259.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:59.463Z,1528882259.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:59.480Z,1528882259.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:30:59.859Z,1528882259.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:30:59.877Z,1528882259.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:00.243Z,1528882260.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:00.279Z,1528882260.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:00.643Z,1528882260.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:00.678Z,1528882260.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:01.040Z,1528882261.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:01.075Z,1528882261.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:01.443Z,1528882261.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:01.460Z,1528882261.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:01.857Z,1528882261.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:01.886Z,1528882261.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:02.253Z,1528882262.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:02.287Z,1528882262.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:02.653Z,1528882262.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:02.687Z,1528882262.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:03.043Z,1528882263.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:03.060Z,1528882263.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:03.444Z,1528882263.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:03.468Z,1528882263.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:03.846Z,1528882263.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:03.864Z,1528882263.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:04.247Z,1528882264.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:04.266Z,1528882264.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:04.646Z,1528882264.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:04.664Z,1528882264.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:05.057Z,1528882265.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:05.091Z,1528882265.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:05.458Z,1528882265.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:05.496Z,1528882265.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:05.854Z,1528882265.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:05.871Z,1528882265.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:06.248Z,1528882266.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:06.266Z,1528882266.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:06.649Z,1528882266.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:06.667Z,1528882266.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:07.049Z,1528882267.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:07.066Z,1528882267.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:07.448Z,1528882267.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:07.467Z,1528882267.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:07.857Z,1528882267.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:07.875Z,1528882267.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:08.257Z,1528882268.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:08.275Z,1528882268.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:08.653Z,1528882268.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:08.671Z,1528882268.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:09.050Z,1528882269.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:09.068Z,1528882269.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:09.448Z,1528882269.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:09.466Z,1528882269.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:09.848Z,1528882269.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:09.866Z,1528882269.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:10.248Z,1528882270.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:10.289Z,1528882270.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:10.648Z,1528882270.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:10.666Z,1528882270.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:11.053Z,1528882271.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:11.071Z,1528882271.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:11.453Z,1528882271.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:11.471Z,1528882271.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:11.854Z,1528882271.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:11.871Z,1528882271.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:12.248Z,1528882272.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:12.267Z,1528882272.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:12.649Z,1528882272.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:12.667Z,1528882272.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:13.046Z,1528882273.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:13.064Z,1528882273.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:13.448Z,1528882273.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:13.466Z,1528882273.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:13.857Z,1528882273.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:13.875Z,1528882273.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:14.257Z,1528882274.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:14.276Z,1528882274.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:14.654Z,1528882274.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:14.671Z,1528882274.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:15.050Z,1528882275.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:15.069Z,1528882275.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:15.443Z,1528882275.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:15.476Z,1528882275.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:15.849Z,1528882275.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:15.867Z,1528882275.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:16.248Z,1528882276.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:16.274Z,1528882276.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:16.650Z,1528882276.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:16.672Z,1528882276.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:17.055Z,1528882277.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:17.073Z,1528882277.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:17.455Z,1528882277.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:17.480Z,1528882277.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:17.856Z,1528882277.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:17.874Z,1528882277.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:18.250Z,1528882278.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:18.267Z,1528882278.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:18.651Z,1528882278.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:18.669Z,1528882278.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:19.052Z,1528882279.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:19.070Z,1528882279.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:19.448Z,1528882279.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:19.479Z,1528882279.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:19.861Z,1528882279.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:19.880Z,1528882279.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:20.255Z,1528882280.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:20.273Z,1528882280.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:20.654Z,1528882280.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:20.676Z,1528882280.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:21.050Z,1528882281.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:21.068Z,1528882281.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:21.449Z,1528882281.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:21.472Z,1528882281.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:21.848Z,1528882281.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:21.876Z,1528882281.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:22.251Z,1528882282.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:22.269Z,1528882282.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:22.643Z,1528882282.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:22.666Z,1528882282.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:23.059Z,1528882283.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:23.077Z,1528882283.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:23.459Z,1528882283.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:23.505Z,1528882283.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:23.859Z,1528882283.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:23.877Z,1528882283.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:24.249Z,1528882284.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:24.267Z,1528882284.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:24.650Z,1528882284.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:24.681Z,1528882284.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:25.043Z,1528882285.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:25.067Z,1528882285.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:25.447Z,1528882285.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:25.483Z,1528882285.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:25.860Z,1528882285.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:25.878Z,1528882285.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:26.259Z,1528882286.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:26.276Z,1528882286.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:26.659Z,1528882286.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:26.680Z,1528882286.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:27.050Z,1528882287.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:27.081Z,1528882287.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:27.443Z,1528882287.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:27.467Z,1528882287.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:27.847Z,1528882287.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:27.870Z,1528882287.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:28.255Z,1528882288.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:28.273Z,1528882288.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:28.651Z,1528882288.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:28.669Z,1528882288.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:29.058Z,1528882289.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:29.076Z,1528882289.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:29.460Z,1528882289.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:29.478Z,1528882289.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:29.859Z,1528882289.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:29.877Z,1528882289.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:30.251Z,1528882290.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:30.308Z,1528882290.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:30.651Z,1528882290.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:30.670Z,1528882290.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:31.050Z,1528882291.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:31.068Z,1528882291.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:31.446Z,1528882291.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:31.471Z,1528882291.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:31.864Z,1528882291.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:31.882Z,1528882291.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:32.262Z,1528882292.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:32.288Z,1528882292.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:32.659Z,1528882292.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:32.678Z,1528882292.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:33.051Z,1528882293.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:33.068Z,1528882293.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:33.450Z,1528882293.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:33.471Z,1528882293.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:33.862Z,1528882293.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:33.885Z,1528882293.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:34.263Z,1528882294.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:34.281Z,1528882294.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:37.370Z,1528882297.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:37.387Z,1528882297.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:37.527Z,1528882297.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:37.564Z,1528882297.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:37.920Z,1528882297.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:37.938Z,1528882297.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:38.329Z,1528882298.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:38.363Z,1528882298.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:38.722Z,1528882298.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:38.741Z,1528882298.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:39.134Z,1528882299.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:39.168Z,1528882299.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:39.529Z,1528882299.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:39.552Z,1528882299.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:39.933Z,1528882299.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:39.952Z,1528882299.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:40.325Z,1528882300.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:40.343Z,1528882300.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:40.724Z,1528882300.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:40.749Z,1528882300.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:41.124Z,1528882301.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:41.142Z,1528882301.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:41.524Z,1528882301.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:41.559Z,1528882301.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:41.930Z,1528882301.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:41.948Z,1528882301.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:42.333Z,1528882302.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:42.351Z,1528882302.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:42.733Z,1528882302.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:42.751Z,1528882302.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:43.125Z,1528882303.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:43.143Z,1528882303.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:43.524Z,1528882303.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:43.554Z,1528882303.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:43.926Z,1528882303.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:43.944Z,1528882303.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:44.319Z,1528882304.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:44.343Z,1528882304.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:44.723Z,1528882304.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:44.754Z,1528882304.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:45.133Z,1528882305.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:45.151Z,1528882305.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:45.533Z,1528882305.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:45.556Z,1528882305.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:45.930Z,1528882305.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:45.952Z,1528882305.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:46.330Z,1528882306.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:46.348Z,1528882306.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:46.719Z,1528882306.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:46.742Z,1528882306.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:47.126Z,1528882307.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:47.143Z,1528882307.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:47.526Z,1528882307.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:47.544Z,1528882307.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:47.930Z,1528882307.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:47.952Z,1528882307.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:48.334Z,1528882308.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:48.351Z,1528882308.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:48.734Z,1528882308.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:48.751Z,1528882308.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:49.119Z,1528882309.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:49.142Z,1528882309.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:49.523Z,1528882309.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:49.545Z,1528882309.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:49.926Z,1528882309.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:49.944Z,1528882309.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:50.326Z,1528882310.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:50.344Z,1528882310.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:50.723Z,1528882310.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:50.745Z,1528882310.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:51.133Z,1528882311.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:51.151Z,1528882311.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:51.530Z,1528882311.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:51.552Z,1528882311.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:51.930Z,1528882311.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:51.952Z,1528882311.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:52.326Z,1528882312.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:52.344Z,1528882312.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:52.719Z,1528882312.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:52.742Z,1528882312.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:53.124Z,1528882313.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:53.155Z,1528882313.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:53.523Z,1528882313.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:53.548Z,1528882313.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:53.931Z,1528882313.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:53.949Z,1528882313.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:54.334Z,1528882314.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:54.356Z,1528882314.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:54.735Z,1528882314.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:54.753Z,1528882314.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:55.119Z,1528882315.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:55.143Z,1528882315.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:55.523Z,1528882315.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:55.546Z,1528882315.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:55.926Z,1528882315.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:55.948Z,1528882315.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:56.319Z,1528882316.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:56.343Z,1528882316.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:56.723Z,1528882316.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:56.745Z,1528882316.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:57.135Z,1528882317.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:57.160Z,1528882317.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:57.534Z,1528882317.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:57.556Z,1528882317.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:57.934Z,1528882317.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:57.952Z,1528882317.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:58.326Z,1528882318.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:58.344Z,1528882318.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:58.719Z,1528882318.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:58.742Z,1528882318.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:59.123Z,1528882319.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:59.146Z,1528882319.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:59.523Z,1528882319.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:59.548Z,1528882319.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:31:59.935Z,1528882319.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:31:59.953Z,1528882319.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:00.334Z,1528882320.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:00.356Z,1528882320.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:00.735Z,1528882320.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:00.760Z,1528882320.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:01.119Z,1528882321.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:01.142Z,1528882321.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:01.523Z,1528882321.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:01.546Z,1528882321.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:01.926Z,1528882321.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:01.944Z,1528882321.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:02.319Z,1528882322.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:02.343Z,1528882322.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:02.727Z,1528882322.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:02.745Z,1528882322.745 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:02.745Z,1528882322.745 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 122
2018-06-13T09:32:02.745Z,1528882322.745 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:32:02.747Z,1528882322.747 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:02.747Z,1528882322.747 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 122
2018-06-13T09:32:02.747Z,1528882322.747 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:32:02.749Z,1528882322.749 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:02.749Z,1528882322.749 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 122
2018-06-13T09:32:02.749Z,1528882322.749 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:32:02.821Z,1528882322.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:32:02.821Z,1528882322.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:32:02.822Z,1528882322.822 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:32:03.134Z,1528882323.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:03.237Z,1528882323.237 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:32:03.237Z,1528882323.237 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 122
2018-06-13T09:32:03.238Z,1528882323.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:32:03.238Z,1528882323.238 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 122
2018-06-13T09:32:03.238Z,1528882323.238 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:32:03.238Z,1528882323.238 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 122
2018-06-13T09:32:03.536Z,1528882323.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:03.552Z,1528882323.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:32:03.553Z,1528882323.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:32:03.553Z,1528882323.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:32:03.554Z,1528882323.554 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:32:03.554Z,1528882323.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:32:03.554Z,1528882323.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:32:03.555Z,1528882323.555 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:32:03.555Z,1528882323.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:32:03.555Z,1528882323.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:32:03.934Z,1528882323.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:03.977Z,1528882323.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:32:03.978Z,1528882323.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:04.319Z,1528882324.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:04.357Z,1528882324.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:32:04.358Z,1528882324.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:04.720Z,1528882324.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:04.752Z,1528882324.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:32:04.753Z,1528882324.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:05.124Z,1528882325.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:05.152Z,1528882325.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:32:05.153Z,1528882325.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:05.519Z,1528882325.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:05.561Z,1528882325.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:32:05.562Z,1528882325.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:05.930Z,1528882325.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:05.953Z,1528882325.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:32:05.954Z,1528882325.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:06.340Z,1528882326.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:06.358Z,1528882326.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:32:06.359Z,1528882326.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:06.734Z,1528882326.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:06.760Z,1528882326.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:32:06.765Z,1528882326.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:07.115Z,1528882327.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:07.155Z,1528882327.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:32:07.156Z,1528882327.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:07.524Z,1528882327.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:07.560Z,1528882327.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:32:07.561Z,1528882327.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:07.919Z,1528882327.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:07.957Z,1528882327.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:32:07.958Z,1528882327.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:08.320Z,1528882328.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:08.351Z,1528882328.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:32:08.352Z,1528882328.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:08.719Z,1528882328.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:08.756Z,1528882328.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:32:08.758Z,1528882328.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:09.140Z,1528882329.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:09.158Z,1528882329.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:32:09.159Z,1528882329.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:09.534Z,1528882329.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:09.558Z,1528882329.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:32:09.559Z,1528882329.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:09.934Z,1528882329.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:09.957Z,1528882329.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:32:09.958Z,1528882329.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:10.319Z,1528882330.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:10.359Z,1528882330.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:32:10.360Z,1528882330.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:10.715Z,1528882330.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:10.752Z,1528882330.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:32:10.757Z,1528882330.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:11.120Z,1528882331.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:11.149Z,1528882331.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:32:11.150Z,1528882331.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:11.519Z,1528882331.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:11.563Z,1528882331.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:32:11.564Z,1528882331.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:11.926Z,1528882331.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:11.959Z,1528882331.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:32:11.960Z,1528882331.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:12.334Z,1528882332.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:12.365Z,1528882332.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:32:12.366Z,1528882332.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:12.729Z,1528882332.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:12.763Z,1528882332.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:32:12.764Z,1528882332.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:13.119Z,1528882333.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:13.158Z,1528882333.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:32:13.159Z,1528882333.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:13.519Z,1528882333.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:13.560Z,1528882333.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:32:13.561Z,1528882333.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:13.919Z,1528882333.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:13.936Z,1528882333.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:32:13.964Z,1528882333.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:14.320Z,1528882334.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:14.354Z,1528882334.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:32:14.355Z,1528882334.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:14.719Z,1528882334.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:14.760Z,1528882334.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:32:14.765Z,1528882334.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:15.133Z,1528882335.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:15.168Z,1528882335.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:32:15.169Z,1528882335.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:15.537Z,1528882335.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:15.564Z,1528882335.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:32:15.566Z,1528882335.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:15.934Z,1528882335.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:15.967Z,1528882335.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:32:15.968Z,1528882335.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:16.324Z,1528882336.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:16.341Z,1528882336.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:32:16.342Z,1528882336.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:16.723Z,1528882336.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:16.741Z,1528882336.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:32:16.742Z,1528882336.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:17.123Z,1528882337.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:17.140Z,1528882337.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:32:17.141Z,1528882337.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:17.522Z,1528882337.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:17.539Z,1528882337.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:32:17.540Z,1528882337.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:17.934Z,1528882337.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:17.968Z,1528882337.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:32:17.973Z,1528882337.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:18.334Z,1528882338.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:18.374Z,1528882338.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:32:18.374Z,1528882338.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:18.730Z,1528882338.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:18.747Z,1528882338.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:32:18.748Z,1528882338.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:19.122Z,1528882339.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:19.140Z,1528882339.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:32:19.141Z,1528882339.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:19.524Z,1528882339.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:19.544Z,1528882339.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:32:19.545Z,1528882339.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:19.924Z,1528882339.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:19.942Z,1528882339.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:32:19.943Z,1528882339.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:20.325Z,1528882340.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:20.343Z,1528882340.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:32:20.344Z,1528882340.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:20.724Z,1528882340.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:20.748Z,1528882340.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:32:20.749Z,1528882340.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:21.130Z,1528882341.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:21.151Z,1528882341.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:32:21.152Z,1528882341.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:21.534Z,1528882341.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:21.551Z,1528882341.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:32:21.552Z,1528882341.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:21.930Z,1528882341.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:21.947Z,1528882341.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:32:21.948Z,1528882341.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:22.324Z,1528882342.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:22.341Z,1528882342.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:32:22.342Z,1528882342.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:22.718Z,1528882342.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:22.748Z,1528882342.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:23.124Z,1528882343.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:23.144Z,1528882343.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:23.521Z,1528882343.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:23.539Z,1528882343.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:23.930Z,1528882343.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:23.948Z,1528882343.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:24.333Z,1528882344.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:24.351Z,1528882344.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:24.729Z,1528882344.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:24.746Z,1528882344.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:25.125Z,1528882345.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:25.143Z,1528882345.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:25.524Z,1528882345.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:25.548Z,1528882345.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:25.929Z,1528882345.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:25.947Z,1528882345.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:26.334Z,1528882346.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:26.351Z,1528882346.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:26.730Z,1528882346.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:26.747Z,1528882346.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:27.126Z,1528882347.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:27.143Z,1528882347.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:27.518Z,1528882347.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:27.548Z,1528882347.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:27.931Z,1528882347.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:27.948Z,1528882347.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:28.333Z,1528882348.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:28.351Z,1528882348.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:28.730Z,1528882348.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:28.748Z,1528882348.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:29.124Z,1528882349.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:29.142Z,1528882349.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:29.524Z,1528882349.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:29.542Z,1528882349.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:29.934Z,1528882349.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:29.952Z,1528882349.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:30.333Z,1528882350.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:30.351Z,1528882350.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:30.733Z,1528882350.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:30.756Z,1528882350.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:31.125Z,1528882351.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:31.143Z,1528882351.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:31.524Z,1528882351.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:31.548Z,1528882351.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:31.934Z,1528882351.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:31.978Z,1528882351.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:32.334Z,1528882352.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:32.351Z,1528882352.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:32.730Z,1528882352.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:32.748Z,1528882352.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:33.124Z,1528882353.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:33.155Z,1528882353.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:33.524Z,1528882353.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:33.542Z,1528882353.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:33.938Z,1528882353.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:33.955Z,1528882353.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:33.975Z,1528882353.975 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T09:32:33.975Z,1528882353.975 [Default:CheckIn:C.Wait] Stopped
2018-06-13T09:32:33.975Z,1528882353.975 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T09:32:33.976Z,1528882353.976 [Default:CheckIn:D] Running Loop=1
2018-06-13T09:32:34.337Z,1528882354.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:34.354Z,1528882354.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:34.358Z,1528882354.358 [Default:CheckIn:D] Stopped
2018-06-13T09:32:34.358Z,1528882354.358 [Default:CheckIn:E] Running Loop=1
2018-06-13T09:32:34.735Z,1528882354.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:34.752Z,1528882354.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:34.756Z,1528882354.756 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 365.348535 min 
2018-06-13T09:32:34.756Z,1528882354.756 [Default:CheckIn:E] Stopped
2018-06-13T09:32:34.756Z,1528882354.756 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T09:32:34.756Z,1528882354.756 [Default:CheckIn] Stopped
2018-06-13T09:32:34.756Z,1528882354.756 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T09:32:34.756Z,1528882354.756 [Default:CheckIn](INFO): Running loop #36
2018-06-13T09:32:34.756Z,1528882354.756 [Default:CheckIn] Running Loop=36
2018-06-13T09:32:34.757Z,1528882354.757 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T09:32:34.757Z,1528882354.757 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T09:32:35.130Z,1528882355.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:35.148Z,1528882355.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:35.530Z,1528882355.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:35.548Z,1528882355.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:38.651Z,1528882358.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:38.686Z,1528882358.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:38.823Z,1528882358.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:38.860Z,1528882358.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:39.224Z,1528882359.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:39.242Z,1528882359.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:39.603Z,1528882359.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:39.635Z,1528882359.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:39.999Z,1528882359.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:40.036Z,1528882360.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:40.400Z,1528882360.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:40.440Z,1528882360.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:40.800Z,1528882360.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:40.839Z,1528882360.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:41.210Z,1528882361.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:41.236Z,1528882361.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:41.613Z,1528882361.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:41.642Z,1528882361.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:42.014Z,1528882362.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:42.042Z,1528882362.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:42.399Z,1528882362.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:42.416Z,1528882362.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:42.800Z,1528882362.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:42.818Z,1528882362.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:43.202Z,1528882363.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:43.220Z,1528882363.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:43.599Z,1528882363.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:43.616Z,1528882363.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:44.013Z,1528882364.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:44.048Z,1528882364.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:44.417Z,1528882364.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:44.444Z,1528882364.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:44.814Z,1528882364.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:44.848Z,1528882364.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:45.203Z,1528882365.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:45.221Z,1528882365.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:45.603Z,1528882365.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:45.621Z,1528882365.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:46.002Z,1528882366.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:46.020Z,1528882366.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:46.403Z,1528882366.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:46.420Z,1528882366.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:46.802Z,1528882366.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:46.820Z,1528882366.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:47.213Z,1528882367.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:47.246Z,1528882367.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:47.616Z,1528882367.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:47.652Z,1528882367.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:48.013Z,1528882368.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:48.046Z,1528882368.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:48.402Z,1528882368.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:48.424Z,1528882368.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:48.803Z,1528882368.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:48.821Z,1528882368.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:49.203Z,1528882369.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:49.244Z,1528882369.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:49.603Z,1528882369.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:49.621Z,1528882369.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:50.017Z,1528882370.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:50.051Z,1528882370.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:50.417Z,1528882370.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:50.450Z,1528882370.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:50.813Z,1528882370.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:50.847Z,1528882370.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:51.203Z,1528882371.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:51.221Z,1528882371.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:51.606Z,1528882371.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:51.625Z,1528882371.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:52.005Z,1528882372.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:52.023Z,1528882372.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:52.406Z,1528882372.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:52.429Z,1528882372.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:52.805Z,1528882372.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:52.823Z,1528882372.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:53.210Z,1528882373.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:53.228Z,1528882373.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:53.614Z,1528882373.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:53.657Z,1528882373.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:54.007Z,1528882374.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:54.024Z,1528882374.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:54.404Z,1528882374.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:54.423Z,1528882374.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:54.805Z,1528882374.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:54.828Z,1528882374.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:55.202Z,1528882375.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:55.220Z,1528882375.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:55.603Z,1528882375.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:55.622Z,1528882375.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:56.013Z,1528882376.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:56.032Z,1528882376.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:56.414Z,1528882376.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:56.449Z,1528882376.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:56.809Z,1528882376.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:56.827Z,1528882376.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:57.207Z,1528882377.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:57.227Z,1528882377.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:57.604Z,1528882377.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:57.628Z,1528882377.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:58.002Z,1528882378.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:58.020Z,1528882378.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:58.404Z,1528882378.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:58.444Z,1528882378.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:58.799Z,1528882378.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:58.833Z,1528882378.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:59.210Z,1528882379.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:59.232Z,1528882379.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:32:59.613Z,1528882379.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:32:59.631Z,1528882379.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:00.010Z,1528882380.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:00.028Z,1528882380.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:00.403Z,1528882380.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:00.434Z,1528882380.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:00.806Z,1528882380.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:00.824Z,1528882380.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:01.207Z,1528882381.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:01.225Z,1528882381.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:01.604Z,1528882381.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:01.622Z,1528882381.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:02.013Z,1528882382.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:02.032Z,1528882382.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:02.417Z,1528882382.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:02.435Z,1528882382.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:02.813Z,1528882382.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:02.831Z,1528882382.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:03.210Z,1528882383.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:03.230Z,1528882383.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:03.606Z,1528882383.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:03.628Z,1528882383.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:04.009Z,1528882384.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:04.027Z,1528882384.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:04.407Z,1528882384.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:04.425Z,1528882384.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:04.805Z,1528882384.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:04.823Z,1528882384.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:05.210Z,1528882385.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:05.228Z,1528882385.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:05.614Z,1528882385.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:05.632Z,1528882385.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:06.011Z,1528882386.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:06.036Z,1528882386.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:06.404Z,1528882386.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:06.423Z,1528882386.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:06.806Z,1528882386.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:06.824Z,1528882386.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:07.199Z,1528882387.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:07.231Z,1528882387.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:07.605Z,1528882387.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:07.622Z,1528882387.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:08.014Z,1528882388.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:08.032Z,1528882388.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:08.410Z,1528882388.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:08.432Z,1528882388.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:08.810Z,1528882388.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:08.832Z,1528882388.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:09.206Z,1528882389.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:09.227Z,1528882389.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:09.599Z,1528882389.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:09.622Z,1528882389.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:10.003Z,1528882390.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:10.035Z,1528882390.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:10.406Z,1528882390.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:10.424Z,1528882390.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:10.802Z,1528882390.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:10.820Z,1528882390.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:11.210Z,1528882391.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:11.232Z,1528882391.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:11.613Z,1528882391.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:11.636Z,1528882391.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:12.010Z,1528882392.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:12.027Z,1528882392.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:12.403Z,1528882392.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:12.425Z,1528882392.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:12.806Z,1528882392.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:12.824Z,1528882392.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:13.205Z,1528882393.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:13.223Z,1528882393.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:13.603Z,1528882393.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:13.625Z,1528882393.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:14.013Z,1528882394.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:14.031Z,1528882394.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:14.410Z,1528882394.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:14.432Z,1528882394.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:14.810Z,1528882394.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:14.828Z,1528882394.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:15.208Z,1528882395.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:15.228Z,1528882395.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:15.603Z,1528882395.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:15.637Z,1528882395.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:16.014Z,1528882396.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:16.031Z,1528882396.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:16.414Z,1528882396.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:16.432Z,1528882396.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:16.814Z,1528882396.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:16.837Z,1528882396.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:17.203Z,1528882397.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:17.226Z,1528882397.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:17.603Z,1528882397.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:17.628Z,1528882397.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:18.011Z,1528882398.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:18.029Z,1528882398.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:18.414Z,1528882398.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:18.436Z,1528882398.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:18.814Z,1528882398.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:18.832Z,1528882398.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:19.199Z,1528882399.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:19.223Z,1528882399.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:19.603Z,1528882399.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:19.627Z,1528882399.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:20.014Z,1528882400.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:20.032Z,1528882400.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:20.415Z,1528882400.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:20.433Z,1528882400.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:20.814Z,1528882400.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:20.832Z,1528882400.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:21.208Z,1528882401.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:21.239Z,1528882401.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:21.605Z,1528882401.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:21.623Z,1528882401.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:22.014Z,1528882402.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:22.031Z,1528882402.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:22.415Z,1528882402.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:22.433Z,1528882402.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:22.811Z,1528882402.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:22.829Z,1528882402.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:23.209Z,1528882403.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:23.227Z,1528882403.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:23.603Z,1528882403.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:23.627Z,1528882403.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:24.014Z,1528882404.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:24.032Z,1528882404.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:24.414Z,1528882404.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:24.436Z,1528882404.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:24.814Z,1528882404.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:24.840Z,1528882404.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:25.206Z,1528882405.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:25.224Z,1528882405.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:25.603Z,1528882405.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:25.625Z,1528882405.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:26.014Z,1528882406.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:26.032Z,1528882406.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:26.414Z,1528882406.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:26.432Z,1528882406.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:26.814Z,1528882406.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:26.831Z,1528882406.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:27.207Z,1528882407.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:27.225Z,1528882407.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:27.599Z,1528882407.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:27.623Z,1528882407.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:28.015Z,1528882408.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:28.032Z,1528882408.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:28.415Z,1528882408.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:28.433Z,1528882408.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:28.812Z,1528882408.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:28.830Z,1528882408.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:29.204Z,1528882409.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:29.236Z,1528882409.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:29.603Z,1528882409.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:29.636Z,1528882409.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:30.013Z,1528882410.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:30.031Z,1528882410.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:30.418Z,1528882410.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:30.440Z,1528882410.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:30.819Z,1528882410.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:30.844Z,1528882410.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:31.196Z,1528882411.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:31.226Z,1528882411.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:31.603Z,1528882411.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:31.627Z,1528882411.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:32.021Z,1528882412.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:32.039Z,1528882412.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:32.420Z,1528882412.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:32.438Z,1528882412.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:32.815Z,1528882412.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:32.833Z,1528882412.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:33.213Z,1528882413.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:33.232Z,1528882413.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:33.595Z,1528882413.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:33.634Z,1528882413.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:34.018Z,1528882414.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:34.037Z,1528882414.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:34.418Z,1528882414.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:34.437Z,1528882414.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:37.518Z,1528882417.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:37.542Z,1528882417.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:37.675Z,1528882417.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:37.693Z,1528882417.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:38.075Z,1528882418.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:38.093Z,1528882418.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:38.476Z,1528882418.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:38.493Z,1528882418.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:38.874Z,1528882418.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:38.892Z,1528882418.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:39.287Z,1528882419.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:39.325Z,1528882419.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:39.686Z,1528882419.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:39.704Z,1528882419.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:40.081Z,1528882420.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:40.100Z,1528882420.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:40.477Z,1528882420.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:40.495Z,1528882420.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:40.876Z,1528882420.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:40.901Z,1528882420.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:41.276Z,1528882421.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:41.296Z,1528882421.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:41.677Z,1528882421.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:41.695Z,1528882421.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:42.082Z,1528882422.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:42.099Z,1528882422.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:42.485Z,1528882422.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:42.503Z,1528882422.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:42.886Z,1528882422.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:42.903Z,1528882422.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:43.276Z,1528882423.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:43.294Z,1528882423.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:43.676Z,1528882423.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:43.694Z,1528882423.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:44.078Z,1528882424.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:44.096Z,1528882424.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:44.474Z,1528882424.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:44.491Z,1528882424.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:44.876Z,1528882424.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:44.894Z,1528882424.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:45.285Z,1528882425.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:45.303Z,1528882425.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:45.685Z,1528882425.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:45.703Z,1528882425.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:46.081Z,1528882426.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:46.100Z,1528882426.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:46.475Z,1528882426.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:46.505Z,1528882426.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:46.874Z,1528882426.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:46.896Z,1528882426.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:47.275Z,1528882427.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:47.299Z,1528882427.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:47.675Z,1528882427.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:47.700Z,1528882427.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:48.087Z,1528882428.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:48.105Z,1528882428.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:48.485Z,1528882428.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:48.503Z,1528882428.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:48.889Z,1528882428.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:48.907Z,1528882428.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:49.270Z,1528882429.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:49.303Z,1528882429.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:49.678Z,1528882429.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:49.696Z,1528882429.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:50.078Z,1528882430.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:50.109Z,1528882430.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:50.478Z,1528882430.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:50.496Z,1528882430.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:50.875Z,1528882430.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:50.904Z,1528882430.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:51.292Z,1528882431.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:51.316Z,1528882431.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:51.692Z,1528882431.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:51.710Z,1528882431.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:52.087Z,1528882432.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:52.106Z,1528882432.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:52.471Z,1528882432.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:52.501Z,1528882432.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:52.871Z,1528882432.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:52.905Z,1528882432.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:53.272Z,1528882433.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:53.308Z,1528882433.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:53.672Z,1528882433.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:53.703Z,1528882433.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:54.087Z,1528882434.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:54.105Z,1528882434.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:54.491Z,1528882434.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:54.508Z,1528882434.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:54.892Z,1528882434.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:54.916Z,1528882434.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:55.271Z,1528882435.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:55.298Z,1528882435.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:55.671Z,1528882435.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:55.708Z,1528882435.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:56.071Z,1528882436.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:56.106Z,1528882436.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:56.472Z,1528882436.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:56.510Z,1528882436.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:56.871Z,1528882436.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:56.888Z,1528882436.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:57.285Z,1528882437.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:57.314Z,1528882437.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:57.685Z,1528882437.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:57.713Z,1528882437.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:58.081Z,1528882438.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:58.115Z,1528882438.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:58.472Z,1528882438.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:58.490Z,1528882438.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:58.871Z,1528882438.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:58.889Z,1528882438.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:59.275Z,1528882439.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:59.293Z,1528882439.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:33:59.674Z,1528882439.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:33:59.692Z,1528882439.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:00.085Z,1528882440.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:00.119Z,1528882440.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:00.486Z,1528882440.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:00.504Z,1528882440.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:00.885Z,1528882440.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:00.903Z,1528882440.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:01.271Z,1528882441.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:01.297Z,1528882441.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:01.675Z,1528882441.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:01.711Z,1528882441.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:02.078Z,1528882442.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:02.096Z,1528882442.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:02.477Z,1528882442.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:02.496Z,1528882442.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:02.876Z,1528882442.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:02.894Z,1528882442.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:03.289Z,1528882443.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:03.307Z,1528882443.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:03.685Z,1528882443.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:03.703Z,1528882443.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:04.082Z,1528882444.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:04.104Z,1528882444.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:04.478Z,1528882444.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:04.496Z,1528882444.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:04.877Z,1528882444.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:04.894Z,1528882444.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:05.278Z,1528882445.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:05.296Z,1528882445.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:05.675Z,1528882445.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:05.705Z,1528882445.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:06.085Z,1528882446.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:06.103Z,1528882446.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:06.486Z,1528882446.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:06.508Z,1528882446.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:06.887Z,1528882446.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:06.912Z,1528882446.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:07.278Z,1528882447.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:07.296Z,1528882447.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:07.675Z,1528882447.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:07.697Z,1528882447.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:08.087Z,1528882448.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:08.105Z,1528882448.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:08.486Z,1528882448.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:08.508Z,1528882448.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:08.886Z,1528882448.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:08.904Z,1528882448.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:09.278Z,1528882449.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:09.308Z,1528882449.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:09.677Z,1528882449.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:09.694Z,1528882449.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:10.089Z,1528882450.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:10.107Z,1528882450.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:10.486Z,1528882450.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:10.512Z,1528882450.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:10.886Z,1528882450.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:10.904Z,1528882450.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:11.275Z,1528882451.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:11.309Z,1528882451.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:11.675Z,1528882451.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:11.700Z,1528882451.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:12.084Z,1528882452.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:12.102Z,1528882452.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:12.491Z,1528882452.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:12.509Z,1528882452.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:12.890Z,1528882452.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:12.916Z,1528882452.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:13.268Z,1528882453.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:13.294Z,1528882453.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:13.671Z,1528882453.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:13.699Z,1528882453.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:14.092Z,1528882454.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:14.111Z,1528882454.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:14.491Z,1528882454.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:14.509Z,1528882454.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:14.893Z,1528882454.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:14.910Z,1528882454.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:15.283Z,1528882455.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:15.301Z,1528882455.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:15.672Z,1528882455.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:15.710Z,1528882455.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:16.089Z,1528882456.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:16.106Z,1528882456.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:16.488Z,1528882456.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:16.506Z,1528882456.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:16.883Z,1528882456.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:16.907Z,1528882456.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:17.272Z,1528882457.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:17.307Z,1528882457.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:17.671Z,1528882457.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:17.706Z,1528882457.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:18.082Z,1528882458.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:18.110Z,1528882458.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:18.493Z,1528882458.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:18.511Z,1528882458.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:18.895Z,1528882458.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:18.913Z,1528882458.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:19.272Z,1528882459.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:19.313Z,1528882459.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:19.671Z,1528882459.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:19.713Z,1528882459.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:20.085Z,1528882460.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:20.115Z,1528882460.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:20.485Z,1528882460.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:20.520Z,1528882460.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:20.882Z,1528882460.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:20.910Z,1528882460.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:21.271Z,1528882461.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:21.313Z,1528882461.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:21.672Z,1528882461.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:21.689Z,1528882461.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:22.085Z,1528882462.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:22.120Z,1528882462.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:22.485Z,1528882462.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:22.520Z,1528882462.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:22.881Z,1528882462.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:22.915Z,1528882462.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:23.274Z,1528882463.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:23.292Z,1528882463.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:23.674Z,1528882463.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:23.692Z,1528882463.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:24.085Z,1528882464.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:24.123Z,1528882464.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:24.489Z,1528882464.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:24.523Z,1528882464.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:24.884Z,1528882464.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:24.901Z,1528882464.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:25.277Z,1528882465.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:25.295Z,1528882465.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:25.676Z,1528882465.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:25.694Z,1528882465.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:26.081Z,1528882466.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:26.099Z,1528882466.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:26.481Z,1528882466.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:26.499Z,1528882466.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:26.885Z,1528882466.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:26.903Z,1528882466.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:27.278Z,1528882467.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:27.300Z,1528882467.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:27.677Z,1528882467.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:27.695Z,1528882467.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:28.082Z,1528882468.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:28.100Z,1528882468.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:28.486Z,1528882468.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:28.508Z,1528882468.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:28.882Z,1528882468.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:28.900Z,1528882468.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:29.277Z,1528882469.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:29.295Z,1528882469.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:29.677Z,1528882469.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:29.695Z,1528882469.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:30.082Z,1528882470.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:30.100Z,1528882470.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:30.486Z,1528882470.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:30.528Z,1528882470.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:30.882Z,1528882470.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:30.900Z,1528882470.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:31.278Z,1528882471.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:31.296Z,1528882471.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:31.675Z,1528882471.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:31.697Z,1528882471.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:32.085Z,1528882472.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:32.103Z,1528882472.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:32.485Z,1528882472.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:32.504Z,1528882472.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:32.882Z,1528882472.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:32.904Z,1528882472.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:33.279Z,1528882473.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:33.297Z,1528882473.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:33.677Z,1528882473.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:33.694Z,1528882473.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:34.085Z,1528882474.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:34.103Z,1528882474.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:34.485Z,1528882474.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:34.502Z,1528882474.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:37.589Z,1528882477.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:37.629Z,1528882477.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:37.743Z,1528882477.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:37.760Z,1528882477.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:38.143Z,1528882478.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:38.161Z,1528882478.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:38.548Z,1528882478.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:38.567Z,1528882478.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:38.942Z,1528882478.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:38.960Z,1528882478.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:39.353Z,1528882479.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:39.371Z,1528882479.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:39.754Z,1528882479.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:39.771Z,1528882479.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:40.150Z,1528882480.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:40.172Z,1528882480.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:40.542Z,1528882480.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:40.559Z,1528882480.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:40.941Z,1528882480.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:40.959Z,1528882480.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:41.344Z,1528882481.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:41.375Z,1528882481.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:41.745Z,1528882481.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:41.763Z,1528882481.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:42.155Z,1528882482.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:42.172Z,1528882482.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:42.554Z,1528882482.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:42.576Z,1528882482.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:42.954Z,1528882482.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:42.976Z,1528882482.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:43.346Z,1528882483.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:43.364Z,1528882483.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:43.738Z,1528882483.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:43.762Z,1528882483.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:44.146Z,1528882484.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:44.163Z,1528882484.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:44.538Z,1528882484.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:44.571Z,1528882484.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:44.943Z,1528882484.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:44.972Z,1528882484.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:45.356Z,1528882485.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:45.374Z,1528882485.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:45.759Z,1528882485.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:45.776Z,1528882485.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:46.156Z,1528882486.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:46.173Z,1528882486.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:46.546Z,1528882486.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:46.564Z,1528882486.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:46.945Z,1528882486.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:46.963Z,1528882486.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:47.346Z,1528882487.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:47.363Z,1528882487.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:47.745Z,1528882487.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:47.763Z,1528882487.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:48.156Z,1528882488.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:48.174Z,1528882488.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:48.558Z,1528882488.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:48.576Z,1528882488.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:48.959Z,1528882488.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:48.977Z,1528882488.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:49.345Z,1528882489.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:49.363Z,1528882489.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:49.745Z,1528882489.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:49.762Z,1528882489.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:50.146Z,1528882490.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:50.165Z,1528882490.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:50.543Z,1528882490.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:50.567Z,1528882490.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:50.945Z,1528882490.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:50.968Z,1528882490.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:51.359Z,1528882491.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:51.377Z,1528882491.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:51.758Z,1528882491.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:51.776Z,1528882491.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:52.159Z,1528882492.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:52.177Z,1528882492.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:52.546Z,1528882492.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:52.575Z,1528882492.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:52.946Z,1528882492.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:52.968Z,1528882492.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:53.343Z,1528882493.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:53.373Z,1528882493.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:53.739Z,1528882493.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:53.772Z,1528882493.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:54.159Z,1528882494.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:54.185Z,1528882494.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:54.559Z,1528882494.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:54.577Z,1528882494.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:54.958Z,1528882494.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:54.982Z,1528882494.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:55.340Z,1528882495.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:55.370Z,1528882495.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:55.739Z,1528882495.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:55.775Z,1528882495.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:56.160Z,1528882496.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:56.184Z,1528882496.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:56.559Z,1528882496.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:56.577Z,1528882496.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:56.955Z,1528882496.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:56.974Z,1528882496.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:57.340Z,1528882497.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:57.372Z,1528882497.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:57.740Z,1528882497.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:57.771Z,1528882497.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:58.155Z,1528882498.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:58.174Z,1528882498.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:58.559Z,1528882498.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:58.576Z,1528882498.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:58.956Z,1528882498.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:58.980Z,1528882498.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:59.340Z,1528882499.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:59.375Z,1528882499.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:34:59.740Z,1528882499.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:34:59.776Z,1528882499.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:00.156Z,1528882500.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:00.180Z,1528882500.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:00.560Z,1528882500.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:00.584Z,1528882500.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:00.961Z,1528882500.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:00.984Z,1528882500.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:01.340Z,1528882501.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:01.372Z,1528882501.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:01.749Z,1528882501.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:01.771Z,1528882501.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:02.161Z,1528882502.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:02.184Z,1528882502.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:02.555Z,1528882502.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:02.573Z,1528882502.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:02.955Z,1528882502.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:02.972Z,1528882502.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:03.349Z,1528882503.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:03.366Z,1528882503.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:03.735Z,1528882503.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:03.771Z,1528882503.771 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:03.771Z,1528882503.771 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 123
2018-06-13T09:35:03.772Z,1528882503.772 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:35:03.773Z,1528882503.773 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:03.774Z,1528882503.774 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 123
2018-06-13T09:35:03.774Z,1528882503.774 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:35:03.775Z,1528882503.775 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:03.775Z,1528882503.775 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 123
2018-06-13T09:35:03.776Z,1528882503.776 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:35:03.849Z,1528882503.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:35:03.849Z,1528882503.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:35:03.850Z,1528882503.850 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:35:04.150Z,1528882504.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:04.265Z,1528882504.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:35:04.265Z,1528882504.265 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 123
2018-06-13T09:35:04.266Z,1528882504.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:35:04.266Z,1528882504.266 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 123
2018-06-13T09:35:04.266Z,1528882504.266 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:35:04.266Z,1528882504.266 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 123
2018-06-13T09:35:04.561Z,1528882504.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:04.583Z,1528882504.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:35:04.583Z,1528882504.583 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:35:04.583Z,1528882504.583 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:35:04.584Z,1528882504.584 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:35:04.584Z,1528882504.584 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:35:04.584Z,1528882504.584 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:35:04.585Z,1528882504.585 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:35:04.585Z,1528882504.585 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:35:04.586Z,1528882504.586 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:35:04.946Z,1528882504.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:04.979Z,1528882504.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:35:04.980Z,1528882504.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:05.342Z,1528882505.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:05.360Z,1528882505.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:35:05.373Z,1528882505.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:05.743Z,1528882505.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:05.761Z,1528882505.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:35:05.762Z,1528882505.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:06.149Z,1528882506.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:06.168Z,1528882506.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:35:06.185Z,1528882506.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:06.554Z,1528882506.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:06.572Z,1528882506.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:35:06.589Z,1528882506.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:06.954Z,1528882506.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:06.972Z,1528882506.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:35:06.973Z,1528882506.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:07.345Z,1528882507.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:07.362Z,1528882507.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:35:07.363Z,1528882507.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:07.743Z,1528882507.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:07.760Z,1528882507.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:35:07.761Z,1528882507.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:08.154Z,1528882508.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:08.172Z,1528882508.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:35:08.173Z,1528882508.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:08.550Z,1528882508.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:08.572Z,1528882508.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:35:08.573Z,1528882508.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:08.950Z,1528882508.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:08.972Z,1528882508.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:35:08.972Z,1528882508.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:09.347Z,1528882509.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:09.365Z,1528882509.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:35:09.366Z,1528882509.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:09.745Z,1528882509.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:09.763Z,1528882509.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:35:09.764Z,1528882509.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:10.150Z,1528882510.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:10.176Z,1528882510.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:35:10.189Z,1528882510.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:10.554Z,1528882510.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:10.571Z,1528882510.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:35:10.572Z,1528882510.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:10.949Z,1528882510.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:10.972Z,1528882510.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:35:10.973Z,1528882510.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:11.349Z,1528882511.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:11.372Z,1528882511.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:35:11.373Z,1528882511.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:11.743Z,1528882511.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:11.780Z,1528882511.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:35:11.780Z,1528882511.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:12.155Z,1528882512.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:12.172Z,1528882512.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:35:12.173Z,1528882512.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:12.554Z,1528882512.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:12.576Z,1528882512.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:35:12.577Z,1528882512.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:12.955Z,1528882512.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:12.994Z,1528882512.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:35:12.995Z,1528882512.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:13.346Z,1528882513.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:13.364Z,1528882513.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:35:13.365Z,1528882513.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:13.743Z,1528882513.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:13.772Z,1528882513.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:35:13.777Z,1528882513.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:14.160Z,1528882514.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:14.178Z,1528882514.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:35:14.179Z,1528882514.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:14.559Z,1528882514.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:14.584Z,1528882514.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:35:14.605Z,1528882514.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:14.955Z,1528882514.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:14.980Z,1528882514.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:35:14.981Z,1528882514.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:15.344Z,1528882515.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:15.384Z,1528882515.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:35:15.386Z,1528882515.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:15.739Z,1528882515.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:15.766Z,1528882515.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:35:15.767Z,1528882515.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:16.156Z,1528882516.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:16.174Z,1528882516.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:35:16.175Z,1528882516.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:16.560Z,1528882516.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:16.578Z,1528882516.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:35:16.579Z,1528882516.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:16.956Z,1528882516.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:16.973Z,1528882516.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:35:16.974Z,1528882516.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:17.340Z,1528882517.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:17.365Z,1528882517.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:35:17.366Z,1528882517.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:17.739Z,1528882517.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:17.780Z,1528882517.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:35:17.781Z,1528882517.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:18.156Z,1528882518.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:18.180Z,1528882518.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:35:18.181Z,1528882518.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:18.558Z,1528882518.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:18.575Z,1528882518.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:35:18.576Z,1528882518.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:18.960Z,1528882518.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:18.978Z,1528882518.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:35:18.979Z,1528882518.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:19.340Z,1528882519.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:19.371Z,1528882519.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:35:19.372Z,1528882519.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:19.739Z,1528882519.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:19.771Z,1528882519.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:35:19.771Z,1528882519.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:20.160Z,1528882520.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:20.178Z,1528882520.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:35:20.179Z,1528882520.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:20.556Z,1528882520.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:20.574Z,1528882520.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:35:20.575Z,1528882520.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:20.954Z,1528882520.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:20.980Z,1528882520.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:35:20.985Z,1528882520.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:21.340Z,1528882521.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:21.377Z,1528882521.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:35:21.378Z,1528882521.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:21.735Z,1528882521.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:21.752Z,1528882521.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:35:21.753Z,1528882521.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:22.154Z,1528882522.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:22.175Z,1528882522.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:35:22.176Z,1528882522.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:22.560Z,1528882522.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:22.584Z,1528882522.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:35:22.585Z,1528882522.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:22.956Z,1528882522.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:22.980Z,1528882522.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:35:22.981Z,1528882522.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:23.339Z,1528882523.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:23.366Z,1528882523.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:35:23.367Z,1528882523.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:23.751Z,1528882523.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:23.776Z,1528882523.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:24.139Z,1528882524.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:24.166Z,1528882524.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:24.555Z,1528882524.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:24.573Z,1528882524.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:24.960Z,1528882524.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:24.979Z,1528882524.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:25.351Z,1528882525.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:25.369Z,1528882525.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:25.739Z,1528882525.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:25.776Z,1528882525.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:26.150Z,1528882526.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:26.168Z,1528882526.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:26.535Z,1528882526.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:26.571Z,1528882526.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:26.939Z,1528882526.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:26.972Z,1528882526.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:27.360Z,1528882527.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:27.378Z,1528882527.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:27.760Z,1528882527.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:27.778Z,1528882527.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:28.155Z,1528882528.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:28.174Z,1528882528.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:28.539Z,1528882528.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:28.578Z,1528882528.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:28.939Z,1528882528.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:28.979Z,1528882528.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:29.343Z,1528882529.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:29.376Z,1528882529.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:29.740Z,1528882529.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:29.772Z,1528882529.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:30.135Z,1528882530.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:30.176Z,1528882530.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:30.550Z,1528882530.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:30.583Z,1528882530.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:30.961Z,1528882530.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:30.979Z,1528882530.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:31.359Z,1528882531.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:31.384Z,1528882531.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:31.739Z,1528882531.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:31.775Z,1528882531.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:32.139Z,1528882532.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:32.177Z,1528882532.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:32.544Z,1528882532.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:32.579Z,1528882532.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:32.943Z,1528882532.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:32.960Z,1528882532.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:33.357Z,1528882533.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:33.392Z,1528882533.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:33.757Z,1528882533.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:33.784Z,1528882533.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:34.157Z,1528882534.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:34.184Z,1528882534.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:34.547Z,1528882534.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:34.581Z,1528882534.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:37.647Z,1528882537.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:37.666Z,1528882537.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:37.807Z,1528882537.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:37.845Z,1528882537.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:38.221Z,1528882538.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:38.250Z,1528882538.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:38.622Z,1528882538.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:38.650Z,1528882538.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:39.014Z,1528882539.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:39.047Z,1528882539.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:39.405Z,1528882539.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:39.423Z,1528882539.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:39.802Z,1528882539.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:39.820Z,1528882539.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:40.214Z,1528882540.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:40.250Z,1528882540.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:40.617Z,1528882540.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:40.651Z,1528882540.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:41.014Z,1528882541.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:41.050Z,1528882541.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:41.406Z,1528882541.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:41.423Z,1528882541.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:41.803Z,1528882541.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:41.828Z,1528882541.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:42.214Z,1528882542.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:42.252Z,1528882542.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:42.617Z,1528882542.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:42.635Z,1528882542.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:43.018Z,1528882543.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:43.035Z,1528882543.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:43.411Z,1528882543.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:43.429Z,1528882543.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:43.809Z,1528882543.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:43.827Z,1528882543.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:44.220Z,1528882544.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:44.238Z,1528882544.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:44.616Z,1528882544.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:44.634Z,1528882544.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:45.015Z,1528882545.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:45.040Z,1528882545.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:45.407Z,1528882545.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:45.432Z,1528882545.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:45.811Z,1528882545.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:45.829Z,1528882545.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:46.216Z,1528882546.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:46.259Z,1528882546.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:46.614Z,1528882546.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:46.650Z,1528882546.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:47.018Z,1528882547.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:47.035Z,1528882547.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:47.412Z,1528882547.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:47.430Z,1528882547.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:47.811Z,1528882547.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:47.829Z,1528882547.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:48.218Z,1528882548.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:48.236Z,1528882548.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:48.618Z,1528882548.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:48.640Z,1528882548.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:49.015Z,1528882549.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:49.050Z,1528882549.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:49.406Z,1528882549.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:49.425Z,1528882549.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:49.809Z,1528882549.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:49.832Z,1528882549.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:50.219Z,1528882550.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:50.237Z,1528882550.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:50.615Z,1528882550.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:50.633Z,1528882550.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:51.015Z,1528882551.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:51.034Z,1528882551.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:51.412Z,1528882551.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:51.431Z,1528882551.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:51.806Z,1528882551.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:51.823Z,1528882551.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:52.215Z,1528882552.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:52.257Z,1528882552.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:52.617Z,1528882552.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:52.635Z,1528882552.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:53.016Z,1528882553.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:53.040Z,1528882553.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:53.411Z,1528882553.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:53.428Z,1528882553.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:53.811Z,1528882553.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:53.829Z,1528882553.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:54.216Z,1528882554.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:54.234Z,1528882554.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:54.618Z,1528882554.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:54.635Z,1528882554.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:55.019Z,1528882555.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:55.060Z,1528882555.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:55.411Z,1528882555.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:55.429Z,1528882555.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:55.810Z,1528882555.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:55.832Z,1528882555.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:56.215Z,1528882556.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:56.255Z,1528882556.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:56.615Z,1528882556.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:56.633Z,1528882556.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:57.016Z,1528882557.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:57.034Z,1528882557.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:57.412Z,1528882557.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:57.430Z,1528882557.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:57.807Z,1528882557.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:57.825Z,1528882557.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:58.215Z,1528882558.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:58.240Z,1528882558.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:58.618Z,1528882558.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:58.636Z,1528882558.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:59.015Z,1528882559.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:59.040Z,1528882559.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:59.410Z,1528882559.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:59.429Z,1528882559.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:35:59.806Z,1528882559.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:35:59.831Z,1528882559.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:00.215Z,1528882560.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:00.233Z,1528882560.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:00.617Z,1528882560.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:00.635Z,1528882560.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:01.017Z,1528882561.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:01.036Z,1528882561.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:01.406Z,1528882561.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:01.424Z,1528882561.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:01.806Z,1528882561.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:01.828Z,1528882561.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:02.211Z,1528882562.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:02.236Z,1528882562.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:02.615Z,1528882562.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:02.633Z,1528882562.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:03.017Z,1528882563.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:03.035Z,1528882563.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:03.415Z,1528882563.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:03.455Z,1528882563.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:03.810Z,1528882563.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:03.832Z,1528882563.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:04.210Z,1528882564.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:04.232Z,1528882564.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:04.613Z,1528882564.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:04.631Z,1528882564.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:05.010Z,1528882565.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:05.032Z,1528882565.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:05.415Z,1528882565.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:05.433Z,1528882565.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:05.817Z,1528882565.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:05.835Z,1528882565.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:06.215Z,1528882566.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:06.233Z,1528882566.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:06.611Z,1528882566.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:06.628Z,1528882566.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:07.010Z,1528882567.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:07.032Z,1528882567.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:07.406Z,1528882567.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:07.424Z,1528882567.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:07.810Z,1528882567.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:07.832Z,1528882567.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:08.211Z,1528882568.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:08.228Z,1528882568.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:08.615Z,1528882568.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:08.633Z,1528882568.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:09.017Z,1528882569.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:09.035Z,1528882569.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:09.417Z,1528882569.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:09.435Z,1528882569.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:09.803Z,1528882569.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:09.828Z,1528882569.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:10.210Z,1528882570.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:10.232Z,1528882570.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:10.611Z,1528882570.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:10.629Z,1528882570.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:11.006Z,1528882571.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:11.023Z,1528882571.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:11.415Z,1528882571.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:11.433Z,1528882571.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:11.814Z,1528882571.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:11.844Z,1528882571.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:12.219Z,1528882572.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:12.237Z,1528882572.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:12.610Z,1528882572.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:12.628Z,1528882572.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:13.011Z,1528882573.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:13.029Z,1528882573.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:13.406Z,1528882573.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:13.429Z,1528882573.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:13.810Z,1528882573.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:13.828Z,1528882573.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:14.212Z,1528882574.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:14.231Z,1528882574.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:14.618Z,1528882574.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:14.636Z,1528882574.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:15.018Z,1528882575.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:15.040Z,1528882575.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:15.419Z,1528882575.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:15.438Z,1528882575.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:15.809Z,1528882575.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:15.827Z,1528882575.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:16.211Z,1528882576.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:16.229Z,1528882576.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:16.610Z,1528882576.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:16.628Z,1528882576.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:17.010Z,1528882577.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:17.032Z,1528882577.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:17.419Z,1528882577.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:17.436Z,1528882577.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:17.819Z,1528882577.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:17.837Z,1528882577.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:18.217Z,1528882578.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:18.235Z,1528882578.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:18.610Z,1528882578.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:18.627Z,1528882578.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:19.014Z,1528882579.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:19.032Z,1528882579.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:19.410Z,1528882579.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:19.427Z,1528882579.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:19.811Z,1528882579.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:19.828Z,1528882579.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:20.211Z,1528882580.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:20.230Z,1528882580.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:20.618Z,1528882580.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:20.635Z,1528882580.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:21.019Z,1528882581.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:21.036Z,1528882581.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:21.419Z,1528882581.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:21.444Z,1528882581.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:21.806Z,1528882581.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:21.824Z,1528882581.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:22.208Z,1528882582.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:22.234Z,1528882582.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:22.610Z,1528882582.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:22.634Z,1528882582.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:23.006Z,1528882583.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:23.041Z,1528882583.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:23.418Z,1528882583.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:23.452Z,1528882583.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:23.823Z,1528882583.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:23.841Z,1528882583.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:24.214Z,1528882584.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:24.238Z,1528882584.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:24.602Z,1528882584.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:24.631Z,1528882584.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:25.013Z,1528882585.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:25.032Z,1528882585.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:25.398Z,1528882585.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:25.429Z,1528882585.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:25.814Z,1528882585.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:25.832Z,1528882585.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:26.203Z,1528882586.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:26.233Z,1528882586.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:26.624Z,1528882586.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:26.648Z,1528882586.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:27.020Z,1528882587.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:27.067Z,1528882587.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:27.422Z,1528882587.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:27.440Z,1528882587.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:27.799Z,1528882587.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:27.836Z,1528882587.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:28.203Z,1528882588.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:28.237Z,1528882588.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:28.596Z,1528882588.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:28.640Z,1528882588.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:28.999Z,1528882588.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:29.027Z,1528882589.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:29.418Z,1528882589.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:29.451Z,1528882589.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:29.825Z,1528882589.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:29.843Z,1528882589.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:30.217Z,1528882590.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:30.234Z,1528882590.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:30.603Z,1528882590.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:30.631Z,1528882590.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:31.002Z,1528882591.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:31.030Z,1528882591.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:31.402Z,1528882591.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:31.435Z,1528882591.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:31.800Z,1528882591.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:31.845Z,1528882591.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:32.195Z,1528882592.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:32.229Z,1528882592.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:32.612Z,1528882592.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:32.646Z,1528882592.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:33.024Z,1528882593.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:33.042Z,1528882593.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:33.421Z,1528882593.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:33.438Z,1528882593.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:33.795Z,1528882593.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:33.830Z,1528882593.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:34.207Z,1528882594.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:34.252Z,1528882594.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:34.605Z,1528882594.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:34.635Z,1528882594.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:37.724Z,1528882597.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:37.742Z,1528882597.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:37.872Z,1528882597.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:37.891Z,1528882597.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:38.272Z,1528882598.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:38.290Z,1528882598.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:38.669Z,1528882598.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:38.687Z,1528882598.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:39.047Z,1528882599.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:39.089Z,1528882599.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:39.444Z,1528882599.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:39.482Z,1528882599.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:39.848Z,1528882599.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:39.878Z,1528882599.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:40.247Z,1528882600.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:40.284Z,1528882600.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:40.670Z,1528882600.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:40.687Z,1528882600.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:41.056Z,1528882601.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:41.085Z,1528882601.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:41.473Z,1528882601.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:41.491Z,1528882601.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:41.847Z,1528882601.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:41.884Z,1528882601.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:42.243Z,1528882602.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:42.276Z,1528882602.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:42.648Z,1528882602.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:42.685Z,1528882602.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:43.048Z,1528882603.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:43.092Z,1528882603.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:43.462Z,1528882603.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:43.490Z,1528882603.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:43.861Z,1528882603.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:43.893Z,1528882603.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:44.261Z,1528882604.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:44.290Z,1528882604.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:44.650Z,1528882604.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:44.686Z,1528882604.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:45.051Z,1528882605.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:45.068Z,1528882605.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:45.447Z,1528882605.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:45.464Z,1528882605.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:45.852Z,1528882605.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:45.870Z,1528882605.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:46.255Z,1528882606.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:46.272Z,1528882606.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:46.661Z,1528882606.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:46.702Z,1528882606.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:47.061Z,1528882607.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:47.099Z,1528882607.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:47.461Z,1528882607.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:47.479Z,1528882607.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:47.858Z,1528882607.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:47.875Z,1528882607.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:48.255Z,1528882608.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:48.273Z,1528882608.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:48.653Z,1528882608.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:48.670Z,1528882608.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:49.049Z,1528882609.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:49.072Z,1528882609.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:49.459Z,1528882609.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:49.484Z,1528882609.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:49.865Z,1528882609.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:49.883Z,1528882609.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:50.306Z,1528882610.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:50.328Z,1528882610.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:50.652Z,1528882610.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:50.670Z,1528882610.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:51.055Z,1528882611.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:51.081Z,1528882611.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:51.456Z,1528882611.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:51.474Z,1528882611.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:51.858Z,1528882611.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:51.876Z,1528882611.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:52.250Z,1528882612.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:52.274Z,1528882612.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:52.667Z,1528882612.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:52.692Z,1528882612.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:53.066Z,1528882613.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:53.088Z,1528882613.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:53.466Z,1528882613.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:53.488Z,1528882613.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:53.851Z,1528882613.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:53.876Z,1528882613.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:54.256Z,1528882614.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:54.280Z,1528882614.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:54.657Z,1528882614.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:54.675Z,1528882614.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:55.059Z,1528882615.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:55.076Z,1528882615.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:55.466Z,1528882615.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:55.484Z,1528882615.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:55.869Z,1528882615.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:55.887Z,1528882615.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:56.266Z,1528882616.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:56.284Z,1528882616.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:56.657Z,1528882616.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:56.675Z,1528882616.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:57.057Z,1528882617.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:57.080Z,1528882617.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:57.443Z,1528882617.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:57.476Z,1528882617.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:57.857Z,1528882617.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:57.874Z,1528882617.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:58.254Z,1528882618.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:58.276Z,1528882618.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:58.667Z,1528882618.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:58.684Z,1528882618.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:59.070Z,1528882619.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:59.089Z,1528882619.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:59.462Z,1528882619.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:59.492Z,1528882619.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:36:59.852Z,1528882619.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:36:59.879Z,1528882619.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:00.251Z,1528882620.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:00.278Z,1528882620.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:00.648Z,1528882620.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:00.683Z,1528882620.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:01.049Z,1528882621.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:01.084Z,1528882621.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:01.467Z,1528882621.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:01.485Z,1528882621.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:01.872Z,1528882621.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:01.890Z,1528882621.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:02.271Z,1528882622.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:02.289Z,1528882622.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:02.649Z,1528882622.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:02.677Z,1528882622.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:03.049Z,1528882623.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:03.076Z,1528882623.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:03.451Z,1528882623.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:03.480Z,1528882623.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:03.848Z,1528882623.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:03.880Z,1528882623.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:04.248Z,1528882624.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:04.296Z,1528882624.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:04.670Z,1528882624.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:04.687Z,1528882624.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:05.067Z,1528882625.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:05.085Z,1528882625.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:05.462Z,1528882625.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:05.490Z,1528882625.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:05.848Z,1528882625.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:05.882Z,1528882625.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:06.252Z,1528882626.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:06.284Z,1528882626.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:06.652Z,1528882626.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:06.688Z,1528882626.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:07.047Z,1528882627.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:07.086Z,1528882627.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:07.456Z,1528882627.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:07.487Z,1528882627.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:07.867Z,1528882627.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:07.890Z,1528882627.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:08.269Z,1528882628.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:08.286Z,1528882628.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:08.643Z,1528882628.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:08.683Z,1528882628.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:09.047Z,1528882629.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:09.079Z,1528882629.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:09.450Z,1528882629.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:09.481Z,1528882629.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:09.850Z,1528882629.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:09.878Z,1528882629.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:10.247Z,1528882630.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:10.281Z,1528882630.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:10.673Z,1528882630.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:10.697Z,1528882630.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:11.066Z,1528882631.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:11.091Z,1528882631.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:11.463Z,1528882631.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:11.487Z,1528882631.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:11.847Z,1528882631.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:11.882Z,1528882631.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:12.247Z,1528882632.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:12.289Z,1528882632.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:12.648Z,1528882632.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:12.686Z,1528882632.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:13.049Z,1528882633.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:13.084Z,1528882633.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:13.453Z,1528882633.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:13.493Z,1528882633.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:13.863Z,1528882633.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:13.902Z,1528882633.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:14.264Z,1528882634.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:14.296Z,1528882634.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:14.649Z,1528882634.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:14.684Z,1528882634.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:15.047Z,1528882635.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:15.096Z,1528882635.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:15.447Z,1528882635.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:15.481Z,1528882635.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:15.846Z,1528882635.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:15.868Z,1528882635.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:16.254Z,1528882636.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:16.276Z,1528882636.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:16.661Z,1528882636.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:16.708Z,1528882636.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:17.057Z,1528882637.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:17.080Z,1528882637.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:17.464Z,1528882637.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:17.502Z,1528882637.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:17.857Z,1528882637.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:17.875Z,1528882637.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:18.251Z,1528882638.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:18.301Z,1528882638.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:18.651Z,1528882638.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:18.672Z,1528882638.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:19.051Z,1528882639.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:19.074Z,1528882639.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:19.464Z,1528882639.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:19.502Z,1528882639.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:19.862Z,1528882639.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:19.907Z,1528882639.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:20.262Z,1528882640.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:20.306Z,1528882640.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:20.654Z,1528882640.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:20.676Z,1528882640.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:21.053Z,1528882641.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:21.081Z,1528882641.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:21.454Z,1528882641.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:21.508Z,1528882641.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:21.847Z,1528882641.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:21.888Z,1528882641.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:22.253Z,1528882642.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:22.276Z,1528882642.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:22.664Z,1528882642.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:22.683Z,1528882642.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:23.059Z,1528882643.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:23.107Z,1528882643.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:23.457Z,1528882643.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:23.476Z,1528882643.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:23.854Z,1528882643.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:23.877Z,1528882643.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:24.247Z,1528882644.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:24.283Z,1528882644.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:24.651Z,1528882644.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:24.682Z,1528882644.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:25.051Z,1528882645.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:25.088Z,1528882645.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:25.463Z,1528882645.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:25.485Z,1528882645.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:25.864Z,1528882645.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:25.884Z,1528882645.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:26.263Z,1528882646.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:26.311Z,1528882646.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:26.652Z,1528882646.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:26.670Z,1528882646.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:27.051Z,1528882647.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:27.078Z,1528882647.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:27.454Z,1528882647.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:27.477Z,1528882647.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:27.846Z,1528882647.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:27.886Z,1528882647.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:28.251Z,1528882648.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:28.275Z,1528882648.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:28.663Z,1528882648.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:28.687Z,1528882648.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:29.061Z,1528882649.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:29.083Z,1528882649.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:29.463Z,1528882649.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:29.512Z,1528882649.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:29.851Z,1528882649.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:29.877Z,1528882649.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:30.247Z,1528882650.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:30.270Z,1528882650.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:30.658Z,1528882650.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:30.681Z,1528882650.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:31.051Z,1528882651.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:31.076Z,1528882651.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:31.462Z,1528882651.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:31.480Z,1528882651.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:31.862Z,1528882651.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:31.890Z,1528882651.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:32.263Z,1528882652.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:32.286Z,1528882652.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:32.647Z,1528882652.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:32.676Z,1528882652.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:33.051Z,1528882653.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:33.082Z,1528882653.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:33.454Z,1528882653.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:33.491Z,1528882653.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:33.854Z,1528882653.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:33.875Z,1528882653.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:34.253Z,1528882654.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:34.271Z,1528882654.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:34.635Z,1528882654.635 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T09:37:34.635Z,1528882654.635 [NAL9602] Data Fault, FailCount= 4
2018-06-13T09:37:34.635Z,1528882654.635 [NAL9602](ERROR): Data Fault
2018-06-13T09:37:34.662Z,1528882654.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:34.713Z,1528882654.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:34.793Z,1528882654.793 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T09:37:37.740Z,1528882657.740 [NAL9602](INFO): Powering down
2018-06-13T09:37:37.768Z,1528882657.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:37.786Z,1528882657.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:37.790Z,1528882657.790 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T09:32:34.8Z
2018-06-13T09:37:37.790Z,1528882657.790 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T09:37:37.790Z,1528882657.790 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T09:37:37.896Z,1528882657.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:37.926Z,1528882657.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:39.026Z,1528882659.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:39.048Z,1528882659.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:39.129Z,1528882659.129 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T09:37:39.129Z,1528882659.129 [NAL9602] No Fault, FailCount= 4
2018-06-13T09:37:39.175Z,1528882659.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:39.200Z,1528882659.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:39.568Z,1528882659.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:39.586Z,1528882659.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:39.959Z,1528882659.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:39.987Z,1528882659.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:40.359Z,1528882660.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:40.396Z,1528882660.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:40.768Z,1528882660.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:40.786Z,1528882660.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:41.168Z,1528882661.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:41.185Z,1528882661.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:44.296Z,1528882664.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:44.337Z,1528882664.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:44.429Z,1528882664.429 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0144.lzma
2018-06-13T09:37:44.453Z,1528882664.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:44.494Z,1528882664.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:44.850Z,1528882664.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:44.884Z,1528882664.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:45.230Z,1528882665.230 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0144.lzma.bak
2018-06-13T09:37:45.230Z,1528882665.230 [DataOverHttps](INFO): SBD MOMSN=8328992
2018-06-13T09:37:45.260Z,1528882665.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:45.303Z,1528882665.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:47.112Z,1528882667.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:47.143Z,1528882667.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:47.254Z,1528882667.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:47.301Z,1528882667.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:50.385Z,1528882670.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:50.403Z,1528882670.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:50.503Z,1528882670.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:50.548Z,1528882670.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:50.907Z,1528882670.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:50.940Z,1528882670.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:51.312Z,1528882671.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:51.349Z,1528882671.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:51.703Z,1528882671.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:51.721Z,1528882671.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:52.111Z,1528882672.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:52.144Z,1528882672.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:52.510Z,1528882672.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:52.554Z,1528882672.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:52.910Z,1528882672.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:52.928Z,1528882672.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:53.310Z,1528882673.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:53.329Z,1528882673.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:56.423Z,1528882676.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:56.454Z,1528882676.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:56.549Z,1528882676.549 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0145.lzma
2018-06-13T09:37:56.569Z,1528882676.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:56.622Z,1528882676.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:56.970Z,1528882676.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:57.009Z,1528882677.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:57.350Z,1528882677.350 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0145.lzma.bak
2018-06-13T09:37:57.350Z,1528882677.350 [DataOverHttps](INFO): SBD MOMSN=8328994
2018-06-13T09:37:57.374Z,1528882677.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:57.417Z,1528882677.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:59.228Z,1528882679.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:59.255Z,1528882679.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:59.258Z,1528882679.258 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T09:37:59.258Z,1528882679.258 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T09:37:59.258Z,1528882679.258 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T09:37:59.370Z,1528882679.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:59.419Z,1528882679.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:37:59.770Z,1528882679.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:37:59.804Z,1528882679.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:00.166Z,1528882680.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:00.184Z,1528882680.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:00.567Z,1528882680.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:00.602Z,1528882680.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:03.678Z,1528882683.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:03.717Z,1528882683.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:03.824Z,1528882683.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:03.877Z,1528882683.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:04.226Z,1528882684.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:04.264Z,1528882684.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:04.631Z,1528882684.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:04.673Z,1528882684.673 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:04.673Z,1528882684.673 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 124
2018-06-13T09:38:04.673Z,1528882684.673 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:38:04.675Z,1528882684.675 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:04.675Z,1528882684.675 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 124
2018-06-13T09:38:04.675Z,1528882684.675 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:38:04.676Z,1528882684.676 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:04.676Z,1528882684.676 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 124
2018-06-13T09:38:04.677Z,1528882684.677 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:38:04.756Z,1528882684.756 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:38:04.757Z,1528882684.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:38:04.757Z,1528882684.757 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:38:05.028Z,1528882685.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:05.121Z,1528882685.121 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:38:05.121Z,1528882685.121 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 124
2018-06-13T09:38:05.122Z,1528882685.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:38:05.122Z,1528882685.122 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 124
2018-06-13T09:38:05.122Z,1528882685.122 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:38:05.122Z,1528882685.122 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 124
2018-06-13T09:38:05.426Z,1528882685.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:05.459Z,1528882685.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:38:05.459Z,1528882685.459 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:38:05.459Z,1528882685.459 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:38:05.460Z,1528882685.460 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:38:05.460Z,1528882685.460 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:38:05.469Z,1528882685.469 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:38:05.469Z,1528882685.469 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:38:05.469Z,1528882685.469 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:38:05.470Z,1528882685.470 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:38:05.832Z,1528882685.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:05.849Z,1528882685.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:38:05.850Z,1528882685.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:06.229Z,1528882686.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:06.247Z,1528882686.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:38:06.248Z,1528882686.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:06.628Z,1528882686.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:06.737Z,1528882686.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T09:38:06.738Z,1528882686.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:07.034Z,1528882687.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:07.088Z,1528882687.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:38:07.089Z,1528882687.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:07.429Z,1528882687.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:07.603Z,1528882687.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T09:38:07.604Z,1528882687.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:07.810Z,1528882687.810 [NAL9602](INFO): Powering up NAL9602
2018-06-13T09:38:07.838Z,1528882687.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:07.982Z,1528882687.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T09:38:07.983Z,1528882687.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:08.234Z,1528882688.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:08.334Z,1528882688.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T09:38:08.335Z,1528882688.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:08.628Z,1528882688.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:08.646Z,1528882688.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:38:08.647Z,1528882688.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:09.032Z,1528882689.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:09.049Z,1528882689.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:38:09.050Z,1528882689.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:09.432Z,1528882689.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:09.451Z,1528882689.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:38:09.452Z,1528882689.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:09.833Z,1528882689.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:09.850Z,1528882689.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:38:09.851Z,1528882689.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:10.230Z,1528882690.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:10.254Z,1528882690.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:38:10.255Z,1528882690.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:10.630Z,1528882690.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:10.655Z,1528882690.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:38:10.656Z,1528882690.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:11.032Z,1528882691.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:11.050Z,1528882691.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:38:11.051Z,1528882691.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:11.430Z,1528882691.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:11.454Z,1528882691.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:38:11.455Z,1528882691.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:11.830Z,1528882691.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:11.854Z,1528882691.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:38:11.854Z,1528882691.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:12.223Z,1528882692.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:12.260Z,1528882692.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:38:12.261Z,1528882692.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:12.630Z,1528882692.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:12.652Z,1528882692.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:38:12.653Z,1528882692.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:13.033Z,1528882693.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:13.056Z,1528882693.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:38:13.057Z,1528882693.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:13.422Z,1528882693.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:13.449Z,1528882693.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:38:13.450Z,1528882693.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:13.833Z,1528882693.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:13.850Z,1528882693.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:38:13.851Z,1528882693.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:14.230Z,1528882694.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:14.255Z,1528882694.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:38:14.256Z,1528882694.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:14.632Z,1528882694.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:14.650Z,1528882694.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:38:14.651Z,1528882694.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:15.037Z,1528882695.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:15.054Z,1528882695.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:38:15.055Z,1528882695.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:15.430Z,1528882695.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:15.454Z,1528882695.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:38:15.455Z,1528882695.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:15.832Z,1528882695.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:15.850Z,1528882695.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:38:15.851Z,1528882695.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:16.236Z,1528882696.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:16.254Z,1528882696.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:38:16.255Z,1528882696.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:16.630Z,1528882696.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:16.654Z,1528882696.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:38:16.655Z,1528882696.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:17.034Z,1528882697.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:17.051Z,1528882697.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:38:17.052Z,1528882697.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:17.430Z,1528882697.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:17.453Z,1528882697.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:38:17.454Z,1528882697.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:17.830Z,1528882697.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:17.855Z,1528882697.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:38:17.856Z,1528882697.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:18.236Z,1528882698.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:18.254Z,1528882698.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:38:18.255Z,1528882698.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:18.646Z,1528882698.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:18.663Z,1528882698.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:38:18.664Z,1528882698.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:19.010Z,1528882699.010 [NAL9602](INFO): NAL9602 initialized
2018-06-13T09:38:19.031Z,1528882699.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:19.060Z,1528882699.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:38:19.061Z,1528882699.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:19.423Z,1528882699.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:19.461Z,1528882699.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:38:19.462Z,1528882699.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:19.848Z,1528882699.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:19.865Z,1528882699.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:38:19.866Z,1528882699.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:20.251Z,1528882700.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:20.269Z,1528882700.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:38:20.270Z,1528882700.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:20.644Z,1528882700.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:20.662Z,1528882700.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:38:20.663Z,1528882700.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:21.027Z,1528882701.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:21.055Z,1528882701.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:38:21.056Z,1528882701.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:21.427Z,1528882701.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:21.455Z,1528882701.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:38:21.456Z,1528882701.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:21.828Z,1528882701.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:21.857Z,1528882701.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:38:21.858Z,1528882701.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:22.232Z,1528882702.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:22.260Z,1528882702.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:38:22.261Z,1528882702.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:22.644Z,1528882702.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:22.662Z,1528882702.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:38:22.663Z,1528882702.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:23.044Z,1528882703.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:23.062Z,1528882703.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:38:23.063Z,1528882703.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:23.449Z,1528882703.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:23.466Z,1528882703.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:38:23.467Z,1528882703.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:23.827Z,1528882703.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:23.858Z,1528882703.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:38:23.859Z,1528882703.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:24.227Z,1528882704.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:24.261Z,1528882704.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:38:24.262Z,1528882704.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:24.628Z,1528882704.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:24.669Z,1528882704.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T09:38:24.670Z,1528882704.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:25.028Z,1528882705.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:25.058Z,1528882705.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:25.427Z,1528882705.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:25.457Z,1528882705.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:25.842Z,1528882705.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:25.872Z,1528882705.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:26.246Z,1528882706.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:26.275Z,1528882706.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:26.642Z,1528882706.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:26.671Z,1528882706.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:27.027Z,1528882707.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:27.044Z,1528882707.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:27.431Z,1528882707.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:27.477Z,1528882707.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:27.831Z,1528882707.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:27.848Z,1528882707.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:28.234Z,1528882708.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:28.264Z,1528882708.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:28.634Z,1528882708.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:28.656Z,1528882708.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:29.037Z,1528882709.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:29.055Z,1528882709.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:29.442Z,1528882709.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:29.479Z,1528882709.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:29.830Z,1528882709.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:29.848Z,1528882709.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:30.234Z,1528882710.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:30.252Z,1528882710.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:30.630Z,1528882710.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:30.648Z,1528882710.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:31.031Z,1528882711.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:31.048Z,1528882711.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:31.431Z,1528882711.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:31.482Z,1528882711.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:31.841Z,1528882711.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:31.879Z,1528882711.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:32.249Z,1528882712.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:32.282Z,1528882712.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:32.645Z,1528882712.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:32.683Z,1528882712.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:33.032Z,1528882713.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:33.054Z,1528882713.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:33.430Z,1528882713.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:33.447Z,1528882713.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:33.831Z,1528882713.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:33.849Z,1528882713.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:34.239Z,1528882714.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:34.257Z,1528882714.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:34.638Z,1528882714.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:34.655Z,1528882714.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:35.037Z,1528882715.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:35.055Z,1528882715.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:35.438Z,1528882715.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:35.457Z,1528882715.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:35.832Z,1528882715.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:35.850Z,1528882715.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:36.234Z,1528882716.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:36.253Z,1528882716.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:36.632Z,1528882716.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:36.650Z,1528882716.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:37.033Z,1528882717.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:37.051Z,1528882717.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:37.433Z,1528882717.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:37.451Z,1528882717.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:37.837Z,1528882717.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:37.855Z,1528882717.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:38.242Z,1528882718.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:38.259Z,1528882718.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:38.641Z,1528882718.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:38.659Z,1528882718.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:39.033Z,1528882719.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:39.050Z,1528882719.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:39.432Z,1528882719.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:39.449Z,1528882719.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:39.834Z,1528882719.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:39.852Z,1528882719.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:40.234Z,1528882720.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:40.253Z,1528882720.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:40.636Z,1528882720.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:40.654Z,1528882720.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:41.049Z,1528882721.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:41.083Z,1528882721.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:41.474Z,1528882721.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:41.492Z,1528882721.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:41.831Z,1528882721.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:41.853Z,1528882721.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:42.238Z,1528882722.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:42.256Z,1528882722.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:42.631Z,1528882722.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:42.654Z,1528882722.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:43.024Z,1528882723.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:43.056Z,1528882723.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:43.434Z,1528882723.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:43.456Z,1528882723.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:43.847Z,1528882723.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:43.865Z,1528882723.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:44.246Z,1528882724.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:44.268Z,1528882724.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:44.647Z,1528882724.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:44.665Z,1528882724.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:45.031Z,1528882725.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:45.056Z,1528882725.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:45.432Z,1528882725.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:45.450Z,1528882725.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:45.835Z,1528882725.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:45.853Z,1528882725.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:46.237Z,1528882726.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:46.254Z,1528882726.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:46.643Z,1528882726.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:46.660Z,1528882726.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:47.047Z,1528882727.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:47.066Z,1528882727.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:47.444Z,1528882727.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:47.462Z,1528882727.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:47.833Z,1528882727.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:47.851Z,1528882727.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:48.238Z,1528882728.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:48.256Z,1528882728.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:48.631Z,1528882728.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:48.654Z,1528882728.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:49.031Z,1528882729.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:49.066Z,1528882729.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:49.435Z,1528882729.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:49.460Z,1528882729.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:49.847Z,1528882729.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:49.872Z,1528882729.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:50.250Z,1528882730.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:50.272Z,1528882730.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:50.649Z,1528882730.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:50.667Z,1528882730.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:51.027Z,1528882731.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:51.063Z,1528882731.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:51.427Z,1528882731.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:51.468Z,1528882731.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:51.828Z,1528882731.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:51.857Z,1528882731.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:52.237Z,1528882732.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:52.255Z,1528882732.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:52.648Z,1528882732.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:52.665Z,1528882732.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:53.048Z,1528882733.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:53.066Z,1528882733.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:53.447Z,1528882733.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:53.465Z,1528882733.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:53.827Z,1528882733.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:53.864Z,1528882733.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:54.231Z,1528882734.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:54.260Z,1528882734.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:54.628Z,1528882734.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:54.655Z,1528882734.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:55.028Z,1528882735.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:55.056Z,1528882735.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:55.427Z,1528882735.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:55.455Z,1528882735.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:55.843Z,1528882735.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:55.861Z,1528882735.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:56.251Z,1528882736.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:56.269Z,1528882736.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:56.650Z,1528882736.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:56.667Z,1528882736.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:57.027Z,1528882737.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:57.054Z,1528882737.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:57.431Z,1528882737.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:57.459Z,1528882737.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:57.828Z,1528882737.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:57.868Z,1528882737.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:58.231Z,1528882738.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:58.270Z,1528882738.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:58.638Z,1528882738.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:58.678Z,1528882738.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:59.049Z,1528882739.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:59.066Z,1528882739.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:59.452Z,1528882739.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:59.470Z,1528882739.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:38:59.831Z,1528882739.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:38:59.864Z,1528882739.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:00.231Z,1528882740.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:00.264Z,1528882740.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:00.631Z,1528882740.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:00.668Z,1528882740.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:01.031Z,1528882741.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:01.065Z,1528882741.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:04.148Z,1528882744.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:04.166Z,1528882744.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:04.285Z,1528882744.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:04.329Z,1528882744.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:04.700Z,1528882744.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:04.724Z,1528882744.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:05.100Z,1528882745.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:05.118Z,1528882745.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:05.475Z,1528882745.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:05.505Z,1528882745.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:05.871Z,1528882745.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:05.888Z,1528882745.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:06.275Z,1528882746.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:06.292Z,1528882746.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:06.689Z,1528882746.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:06.717Z,1528882746.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:07.093Z,1528882747.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:07.123Z,1528882747.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:07.486Z,1528882747.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:07.524Z,1528882747.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:07.875Z,1528882747.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:07.893Z,1528882747.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:08.279Z,1528882748.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:08.298Z,1528882748.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:08.675Z,1528882748.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:08.692Z,1528882748.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:09.079Z,1528882749.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:09.097Z,1528882749.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:09.479Z,1528882749.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:09.498Z,1528882749.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:09.890Z,1528882749.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:09.924Z,1528882749.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:10.294Z,1528882750.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:10.329Z,1528882750.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:10.690Z,1528882750.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:10.708Z,1528882750.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:11.080Z,1528882751.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:11.099Z,1528882751.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:11.480Z,1528882751.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:11.498Z,1528882751.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:11.880Z,1528882751.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:11.898Z,1528882751.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:12.281Z,1528882752.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:12.299Z,1528882752.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:12.685Z,1528882752.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:12.703Z,1528882752.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:13.089Z,1528882753.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:13.107Z,1528882753.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:13.485Z,1528882753.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:13.503Z,1528882753.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:13.880Z,1528882753.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:13.898Z,1528882753.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:14.280Z,1528882754.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:14.299Z,1528882754.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:14.680Z,1528882754.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:14.699Z,1528882754.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:15.080Z,1528882755.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:15.102Z,1528882755.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:15.480Z,1528882755.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:15.498Z,1528882755.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:15.885Z,1528882755.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:15.903Z,1528882755.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:16.293Z,1528882756.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:16.329Z,1528882756.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:16.689Z,1528882756.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:16.707Z,1528882756.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:17.083Z,1528882757.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:17.101Z,1528882757.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:17.481Z,1528882757.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:17.499Z,1528882757.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:17.882Z,1528882757.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:17.901Z,1528882757.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:18.281Z,1528882758.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:18.300Z,1528882758.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:18.686Z,1528882758.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:18.712Z,1528882758.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:19.090Z,1528882759.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:19.116Z,1528882759.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:19.491Z,1528882759.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:19.510Z,1528882759.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:19.879Z,1528882759.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:19.903Z,1528882759.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:20.279Z,1528882760.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:20.311Z,1528882760.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:20.681Z,1528882760.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:20.700Z,1528882760.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:21.079Z,1528882761.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:21.103Z,1528882761.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:21.479Z,1528882761.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:21.503Z,1528882761.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:21.891Z,1528882761.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:21.909Z,1528882761.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:22.290Z,1528882762.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:22.312Z,1528882762.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:22.690Z,1528882762.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:22.708Z,1528882762.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:23.077Z,1528882763.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:23.095Z,1528882763.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:23.481Z,1528882763.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:23.499Z,1528882763.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:23.880Z,1528882763.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:23.902Z,1528882763.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:24.271Z,1528882764.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:24.308Z,1528882764.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:24.692Z,1528882764.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:24.710Z,1528882764.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:25.095Z,1528882765.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:25.120Z,1528882765.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:25.492Z,1528882765.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:25.510Z,1528882765.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:25.875Z,1528882765.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:25.912Z,1528882765.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:26.275Z,1528882766.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:26.312Z,1528882766.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:26.675Z,1528882766.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:26.703Z,1528882766.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:27.075Z,1528882767.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:27.111Z,1528882767.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:27.475Z,1528882767.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:27.512Z,1528882767.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:27.892Z,1528882767.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:27.911Z,1528882767.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:28.298Z,1528882768.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:28.320Z,1528882768.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:28.692Z,1528882768.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:28.710Z,1528882768.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:29.071Z,1528882769.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:29.105Z,1528882769.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:29.475Z,1528882769.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:29.504Z,1528882769.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:29.876Z,1528882769.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:29.914Z,1528882769.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:30.271Z,1528882770.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:30.304Z,1528882770.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:30.686Z,1528882770.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:30.723Z,1528882770.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:31.093Z,1528882771.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:31.120Z,1528882771.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:31.497Z,1528882771.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:31.515Z,1528882771.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:31.875Z,1528882771.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:31.911Z,1528882771.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:32.275Z,1528882772.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:32.313Z,1528882772.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:32.675Z,1528882772.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:32.709Z,1528882772.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:33.076Z,1528882773.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:33.093Z,1528882773.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:33.479Z,1528882773.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:33.509Z,1528882773.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:33.889Z,1528882773.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:33.907Z,1528882773.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:34.289Z,1528882774.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:34.307Z,1528882774.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:34.686Z,1528882774.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:34.703Z,1528882774.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:35.077Z,1528882775.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:35.095Z,1528882775.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:35.480Z,1528882775.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:35.498Z,1528882775.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:35.880Z,1528882775.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:35.898Z,1528882775.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:36.278Z,1528882776.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:36.296Z,1528882776.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:36.685Z,1528882776.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:36.703Z,1528882776.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:37.089Z,1528882777.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:37.107Z,1528882777.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:37.485Z,1528882777.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:37.508Z,1528882777.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:37.879Z,1528882777.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:37.896Z,1528882777.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:38.280Z,1528882778.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:38.298Z,1528882778.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:38.678Z,1528882778.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:38.695Z,1528882778.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:39.080Z,1528882779.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:39.098Z,1528882779.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:39.480Z,1528882779.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:39.498Z,1528882779.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:39.885Z,1528882779.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:39.903Z,1528882779.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:40.289Z,1528882780.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:40.307Z,1528882780.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:40.686Z,1528882780.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:40.704Z,1528882780.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:41.080Z,1528882781.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:41.098Z,1528882781.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:41.480Z,1528882781.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:41.497Z,1528882781.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:41.880Z,1528882781.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:41.898Z,1528882781.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:42.278Z,1528882782.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:42.300Z,1528882782.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:42.685Z,1528882782.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:42.703Z,1528882782.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:43.089Z,1528882783.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:43.107Z,1528882783.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:43.485Z,1528882783.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:43.503Z,1528882783.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:43.880Z,1528882783.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:43.898Z,1528882783.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:44.280Z,1528882784.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:44.299Z,1528882784.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:44.679Z,1528882784.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:44.696Z,1528882784.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:45.082Z,1528882785.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:45.100Z,1528882785.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:45.480Z,1528882785.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:45.498Z,1528882785.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:45.893Z,1528882785.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:45.911Z,1528882785.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:46.289Z,1528882786.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:46.307Z,1528882786.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:46.687Z,1528882786.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:46.712Z,1528882786.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:47.081Z,1528882787.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:47.098Z,1528882787.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:47.482Z,1528882787.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:47.504Z,1528882787.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:47.880Z,1528882787.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:47.909Z,1528882787.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:48.278Z,1528882788.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:48.296Z,1528882788.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:48.687Z,1528882788.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:48.705Z,1528882788.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:49.086Z,1528882789.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:49.105Z,1528882789.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:49.486Z,1528882789.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:49.505Z,1528882789.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:49.884Z,1528882789.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:49.903Z,1528882789.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:50.279Z,1528882790.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:50.310Z,1528882790.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:50.681Z,1528882790.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:50.699Z,1528882790.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:51.079Z,1528882791.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:51.102Z,1528882791.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:51.479Z,1528882791.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:51.503Z,1528882791.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:51.892Z,1528882791.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:51.910Z,1528882791.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:52.290Z,1528882792.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:52.308Z,1528882792.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:52.691Z,1528882792.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:52.709Z,1528882792.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:53.078Z,1528882793.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:53.096Z,1528882793.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:53.479Z,1528882793.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:53.502Z,1528882793.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:53.886Z,1528882793.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:53.905Z,1528882793.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:54.278Z,1528882794.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:54.296Z,1528882794.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:54.690Z,1528882794.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:54.708Z,1528882794.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:55.090Z,1528882795.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:55.112Z,1528882795.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:55.491Z,1528882795.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:55.510Z,1528882795.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:55.879Z,1528882795.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:55.902Z,1528882795.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:56.279Z,1528882796.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:56.303Z,1528882796.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:56.679Z,1528882796.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:56.697Z,1528882796.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:57.074Z,1528882797.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:57.108Z,1528882797.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:57.479Z,1528882797.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:57.503Z,1528882797.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:57.890Z,1528882797.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:57.909Z,1528882797.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:58.290Z,1528882798.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:58.312Z,1528882798.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:58.690Z,1528882798.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:58.712Z,1528882798.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:59.082Z,1528882799.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:59.099Z,1528882799.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:59.484Z,1528882799.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:59.508Z,1528882799.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:39:59.886Z,1528882799.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:39:59.904Z,1528882799.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:02.989Z,1528882802.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:03.008Z,1528882803.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:03.146Z,1528882803.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:03.191Z,1528882803.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:03.542Z,1528882803.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:03.564Z,1528882803.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:03.940Z,1528882803.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:03.958Z,1528882803.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:04.319Z,1528882804.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:04.358Z,1528882804.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:04.719Z,1528882804.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:04.747Z,1528882804.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:05.120Z,1528882805.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:05.147Z,1528882805.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:05.519Z,1528882805.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:05.557Z,1528882805.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:05.935Z,1528882805.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:05.953Z,1528882805.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:06.336Z,1528882806.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:06.354Z,1528882806.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:06.735Z,1528882806.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:06.754Z,1528882806.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:07.119Z,1528882807.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:07.152Z,1528882807.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:07.520Z,1528882807.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:07.552Z,1528882807.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:07.920Z,1528882807.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:07.955Z,1528882807.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:08.319Z,1528882808.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:08.352Z,1528882808.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:08.740Z,1528882808.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:08.758Z,1528882808.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:09.139Z,1528882809.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:09.156Z,1528882809.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:09.541Z,1528882809.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:09.559Z,1528882809.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:09.915Z,1528882809.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:09.945Z,1528882809.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:10.319Z,1528882810.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:10.357Z,1528882810.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:10.719Z,1528882810.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:10.749Z,1528882810.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:11.116Z,1528882811.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:11.134Z,1528882811.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:11.519Z,1528882811.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:11.537Z,1528882811.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:11.937Z,1528882811.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:11.966Z,1528882811.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:12.337Z,1528882812.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:12.365Z,1528882812.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:12.737Z,1528882812.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:12.764Z,1528882812.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:13.123Z,1528882813.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:13.141Z,1528882813.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:13.518Z,1528882813.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:13.536Z,1528882813.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:13.922Z,1528882813.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:13.944Z,1528882813.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:14.323Z,1528882814.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:14.341Z,1528882814.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:14.733Z,1528882814.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:14.771Z,1528882814.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:15.133Z,1528882815.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:15.151Z,1528882815.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:15.530Z,1528882815.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:15.547Z,1528882815.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:15.922Z,1528882815.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:15.940Z,1528882815.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:16.324Z,1528882816.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:16.342Z,1528882816.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:16.723Z,1528882816.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:16.748Z,1528882816.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:17.123Z,1528882817.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:17.140Z,1528882817.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:17.524Z,1528882817.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:17.541Z,1528882817.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:17.929Z,1528882817.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:17.948Z,1528882817.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:18.329Z,1528882818.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:18.348Z,1528882818.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:18.730Z,1528882818.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:18.747Z,1528882818.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:19.124Z,1528882819.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:19.142Z,1528882819.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:19.522Z,1528882819.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:19.539Z,1528882819.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:19.924Z,1528882819.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:19.944Z,1528882819.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:20.324Z,1528882820.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:20.342Z,1528882820.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:20.729Z,1528882820.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:20.752Z,1528882820.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:21.134Z,1528882821.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:21.172Z,1528882821.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:21.530Z,1528882821.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:21.547Z,1528882821.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:21.922Z,1528882821.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:21.940Z,1528882821.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:22.324Z,1528882822.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:22.348Z,1528882822.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:22.724Z,1528882822.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:22.742Z,1528882822.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:23.122Z,1528882823.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:23.141Z,1528882823.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:23.524Z,1528882823.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:23.542Z,1528882823.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:23.930Z,1528882823.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:23.948Z,1528882823.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:24.333Z,1528882824.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:24.351Z,1528882824.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:24.730Z,1528882824.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:24.747Z,1528882824.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:25.124Z,1528882825.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:25.142Z,1528882825.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:25.522Z,1528882825.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:25.540Z,1528882825.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:25.924Z,1528882825.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:25.950Z,1528882825.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:26.325Z,1528882826.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:26.343Z,1528882826.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:26.731Z,1528882826.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:26.749Z,1528882826.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:27.133Z,1528882827.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:27.151Z,1528882827.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:27.530Z,1528882827.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:27.556Z,1528882827.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:27.927Z,1528882827.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:27.944Z,1528882827.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:28.323Z,1528882828.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:28.355Z,1528882828.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:28.726Z,1528882828.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:28.743Z,1528882828.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:29.122Z,1528882829.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:29.140Z,1528882829.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:29.523Z,1528882829.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:29.547Z,1528882829.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:29.938Z,1528882829.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:29.980Z,1528882829.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:30.335Z,1528882830.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:30.353Z,1528882830.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:30.735Z,1528882830.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:30.753Z,1528882830.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:31.123Z,1528882831.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:31.148Z,1528882831.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:31.523Z,1528882831.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:31.540Z,1528882831.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:31.928Z,1528882831.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:31.946Z,1528882831.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:32.325Z,1528882832.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:32.343Z,1528882832.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:32.736Z,1528882832.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:32.754Z,1528882832.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:33.135Z,1528882833.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:33.152Z,1528882833.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:33.535Z,1528882833.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:33.553Z,1528882833.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:33.922Z,1528882833.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:33.941Z,1528882833.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:34.325Z,1528882834.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:34.344Z,1528882834.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:34.725Z,1528882834.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:34.743Z,1528882834.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:35.123Z,1528882835.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:35.140Z,1528882835.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:35.519Z,1528882835.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:35.556Z,1528882835.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:35.930Z,1528882835.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:35.948Z,1528882835.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:36.335Z,1528882836.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:36.357Z,1528882836.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:36.742Z,1528882836.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:36.764Z,1528882836.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:37.120Z,1528882837.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:37.152Z,1528882837.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:37.516Z,1528882837.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:37.546Z,1528882837.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:37.920Z,1528882837.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:37.951Z,1528882837.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:38.315Z,1528882838.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:38.355Z,1528882838.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:38.741Z,1528882838.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:38.759Z,1528882838.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:39.140Z,1528882839.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:39.158Z,1528882839.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:39.536Z,1528882839.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:39.560Z,1528882839.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:39.915Z,1528882839.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:39.945Z,1528882839.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:40.320Z,1528882840.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:40.358Z,1528882840.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:40.715Z,1528882840.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:40.732Z,1528882840.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:41.120Z,1528882841.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:41.158Z,1528882841.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:41.519Z,1528882841.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:41.537Z,1528882841.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:41.933Z,1528882841.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:41.968Z,1528882841.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:42.338Z,1528882842.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:42.367Z,1528882842.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:42.737Z,1528882842.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:42.764Z,1528882842.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:43.123Z,1528882843.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:43.140Z,1528882843.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:43.519Z,1528882843.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:43.537Z,1528882843.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:43.924Z,1528882843.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:43.964Z,1528882843.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:44.321Z,1528882844.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:44.339Z,1528882844.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:44.733Z,1528882844.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:44.771Z,1528882844.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:45.133Z,1528882845.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:45.151Z,1528882845.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:45.529Z,1528882845.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:45.552Z,1528882845.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:45.926Z,1528882845.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:45.943Z,1528882845.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:46.318Z,1528882846.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:46.347Z,1528882846.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:46.729Z,1528882846.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:46.747Z,1528882846.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:47.133Z,1528882847.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:47.151Z,1528882847.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:47.530Z,1528882847.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:47.547Z,1528882847.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:47.925Z,1528882847.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:47.943Z,1528882847.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:48.325Z,1528882848.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:48.343Z,1528882848.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:48.729Z,1528882848.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:48.747Z,1528882848.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:49.134Z,1528882849.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:49.151Z,1528882849.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:49.533Z,1528882849.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:49.551Z,1528882849.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:49.925Z,1528882849.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:49.943Z,1528882849.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:50.324Z,1528882850.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:50.342Z,1528882850.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:50.732Z,1528882850.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:50.750Z,1528882850.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:51.133Z,1528882851.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:51.152Z,1528882851.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:51.529Z,1528882851.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:51.552Z,1528882851.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:51.926Z,1528882851.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:51.944Z,1528882851.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:52.324Z,1528882852.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:52.341Z,1528882852.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:52.729Z,1528882852.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:52.747Z,1528882852.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:53.133Z,1528882853.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:53.151Z,1528882853.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:53.530Z,1528882853.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:53.547Z,1528882853.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:53.925Z,1528882853.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:53.943Z,1528882853.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:54.325Z,1528882854.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:54.343Z,1528882854.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:54.729Z,1528882854.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:54.747Z,1528882854.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:55.129Z,1528882855.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:55.152Z,1528882855.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:55.534Z,1528882855.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:55.551Z,1528882855.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:55.924Z,1528882855.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:55.943Z,1528882855.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:56.324Z,1528882856.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:56.342Z,1528882856.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:56.737Z,1528882856.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:56.771Z,1528882856.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:57.133Z,1528882857.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:57.151Z,1528882857.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:57.530Z,1528882857.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:57.547Z,1528882857.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:57.927Z,1528882857.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:57.944Z,1528882857.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:58.328Z,1528882858.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:58.345Z,1528882858.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:58.730Z,1528882858.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:58.756Z,1528882858.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:59.134Z,1528882859.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:59.151Z,1528882859.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:59.534Z,1528882859.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:59.551Z,1528882859.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:40:59.929Z,1528882859.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:40:59.947Z,1528882859.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:03.042Z,1528882863.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:03.082Z,1528882863.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:03.206Z,1528882863.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:03.252Z,1528882863.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:03.616Z,1528882863.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:03.640Z,1528882863.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:04.018Z,1528882864.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:04.040Z,1528882864.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:04.391Z,1528882864.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:04.408Z,1528882864.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:04.795Z,1528882864.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:04.812Z,1528882864.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:05.195Z,1528882865.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:05.245Z,1528882865.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:05.594Z,1528882865.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:05.612Z,1528882865.612 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:05.612Z,1528882865.612 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 125
2018-06-13T09:41:05.612Z,1528882865.612 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:41:05.614Z,1528882865.614 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:05.614Z,1528882865.614 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 125
2018-06-13T09:41:05.614Z,1528882865.614 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:41:05.616Z,1528882865.616 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:05.616Z,1528882865.616 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 125
2018-06-13T09:41:05.616Z,1528882865.616 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:41:05.705Z,1528882865.705 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:41:05.705Z,1528882865.705 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:41:05.706Z,1528882865.706 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:41:06.002Z,1528882866.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:06.093Z,1528882866.093 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:41:06.093Z,1528882866.093 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 125
2018-06-13T09:41:06.093Z,1528882866.093 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:41:06.094Z,1528882866.094 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 125
2018-06-13T09:41:06.094Z,1528882866.094 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:41:06.094Z,1528882866.094 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 125
2018-06-13T09:41:06.406Z,1528882866.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:06.422Z,1528882866.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:41:06.423Z,1528882866.423 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:41:06.423Z,1528882866.423 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:41:06.423Z,1528882866.423 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:41:06.424Z,1528882866.424 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:41:06.424Z,1528882866.424 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:41:06.424Z,1528882866.424 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:41:06.425Z,1528882866.425 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:41:06.425Z,1528882866.425 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:41:06.807Z,1528882866.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:06.824Z,1528882866.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:41:06.826Z,1528882866.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:07.195Z,1528882867.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:07.218Z,1528882867.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:41:07.219Z,1528882867.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:07.598Z,1528882867.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:07.620Z,1528882867.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:41:07.621Z,1528882867.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:07.995Z,1528882867.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:08.018Z,1528882868.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:41:08.019Z,1528882868.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:08.395Z,1528882868.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:08.418Z,1528882868.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:41:08.419Z,1528882868.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:08.807Z,1528882868.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:08.825Z,1528882868.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:41:08.826Z,1528882868.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:09.206Z,1528882869.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:09.228Z,1528882869.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:41:09.229Z,1528882869.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:09.607Z,1528882869.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:09.625Z,1528882869.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:41:09.626Z,1528882869.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:09.999Z,1528882869.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:10.016Z,1528882870.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:41:10.017Z,1528882870.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:10.395Z,1528882870.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:10.418Z,1528882870.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:41:10.419Z,1528882870.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:10.795Z,1528882870.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:10.819Z,1528882870.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:41:10.820Z,1528882870.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:11.198Z,1528882871.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:11.226Z,1528882871.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:41:11.227Z,1528882871.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:11.590Z,1528882871.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:11.624Z,1528882871.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:41:11.624Z,1528882871.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:12.008Z,1528882872.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:12.032Z,1528882872.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:41:12.049Z,1528882872.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:12.409Z,1528882872.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:12.432Z,1528882872.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:41:12.433Z,1528882872.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:12.805Z,1528882872.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:12.830Z,1528882872.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:41:12.831Z,1528882872.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:13.202Z,1528882873.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:13.220Z,1528882873.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:41:13.221Z,1528882873.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:13.595Z,1528882873.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:13.614Z,1528882873.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:41:13.614Z,1528882873.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:13.995Z,1528882873.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:14.019Z,1528882874.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:41:14.020Z,1528882874.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:14.396Z,1528882874.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:14.432Z,1528882874.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:41:14.437Z,1528882874.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:14.809Z,1528882874.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:14.827Z,1528882874.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:41:14.828Z,1528882874.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:15.210Z,1528882875.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:15.228Z,1528882875.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:41:15.229Z,1528882875.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:15.602Z,1528882875.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:15.630Z,1528882875.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:41:15.631Z,1528882875.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:15.987Z,1528882875.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:16.025Z,1528882876.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:41:16.026Z,1528882876.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:16.392Z,1528882876.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:16.419Z,1528882876.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:41:16.420Z,1528882876.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:16.791Z,1528882876.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:16.819Z,1528882876.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:41:16.820Z,1528882876.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:17.191Z,1528882877.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:17.228Z,1528882877.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:41:17.229Z,1528882877.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:17.591Z,1528882877.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:17.620Z,1528882877.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:41:17.622Z,1528882877.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:18.007Z,1528882878.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:18.026Z,1528882878.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:41:18.027Z,1528882878.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:18.409Z,1528882878.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:18.432Z,1528882878.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:41:18.433Z,1528882878.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:18.807Z,1528882878.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:18.825Z,1528882878.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:41:18.826Z,1528882878.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:19.187Z,1528882879.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:19.224Z,1528882879.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:41:19.225Z,1528882879.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:19.587Z,1528882879.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:19.624Z,1528882879.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:41:19.625Z,1528882879.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:19.991Z,1528882879.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:20.018Z,1528882880.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:41:20.019Z,1528882880.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:20.391Z,1528882880.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:20.419Z,1528882880.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:41:20.420Z,1528882880.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:20.812Z,1528882880.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:20.829Z,1528882880.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:41:20.830Z,1528882880.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:21.212Z,1528882881.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:21.230Z,1528882881.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:41:21.231Z,1528882881.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:21.608Z,1528882881.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:21.625Z,1528882881.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:41:21.626Z,1528882881.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:21.987Z,1528882881.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:22.017Z,1528882882.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:41:22.018Z,1528882882.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:22.391Z,1528882882.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:22.427Z,1528882882.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:41:22.428Z,1528882882.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:22.795Z,1528882882.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:22.828Z,1528882882.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:41:22.829Z,1528882882.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:23.192Z,1528882883.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:23.227Z,1528882883.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:41:23.228Z,1528882883.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:23.591Z,1528882883.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:23.617Z,1528882883.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:41:23.618Z,1528882883.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:24.001Z,1528882884.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:24.030Z,1528882884.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:41:24.031Z,1528882884.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:24.405Z,1528882884.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:24.433Z,1528882884.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:41:24.434Z,1528882884.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:24.806Z,1528882884.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:24.840Z,1528882884.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:41:24.841Z,1528882884.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:25.191Z,1528882885.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:25.232Z,1528882885.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:41:25.233Z,1528882885.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:25.587Z,1528882885.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:25.605Z,1528882885.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T09:41:25.606Z,1528882885.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:25.992Z,1528882885.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:26.010Z,1528882886.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:26.391Z,1528882886.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:26.412Z,1528882886.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:26.801Z,1528882886.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:26.832Z,1528882886.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:27.205Z,1528882887.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:27.239Z,1528882887.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:27.605Z,1528882887.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:27.624Z,1528882887.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:27.994Z,1528882887.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:28.012Z,1528882888.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:28.396Z,1528882888.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:28.413Z,1528882888.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:28.796Z,1528882888.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:28.814Z,1528882888.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:29.194Z,1528882889.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:29.212Z,1528882889.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:29.595Z,1528882889.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:29.612Z,1528882889.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:30.002Z,1528882890.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:30.020Z,1528882890.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:30.401Z,1528882890.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:30.419Z,1528882890.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:30.802Z,1528882890.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:30.819Z,1528882890.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:31.196Z,1528882891.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:31.214Z,1528882891.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:31.594Z,1528882891.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:31.612Z,1528882891.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:31.996Z,1528882891.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:32.014Z,1528882892.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:32.396Z,1528882892.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:32.414Z,1528882892.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:32.801Z,1528882892.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:32.819Z,1528882892.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:33.209Z,1528882893.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:33.227Z,1528882893.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:33.602Z,1528882893.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:33.624Z,1528882893.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:33.994Z,1528882893.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:34.012Z,1528882894.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:34.392Z,1528882894.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:34.410Z,1528882894.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:34.803Z,1528882894.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:34.821Z,1528882894.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:35.202Z,1528882895.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:35.220Z,1528882895.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:35.602Z,1528882895.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:35.624Z,1528882895.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:35.995Z,1528882895.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:36.027Z,1528882896.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:36.394Z,1528882896.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:36.412Z,1528882896.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:36.802Z,1528882896.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:36.828Z,1528882896.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:37.205Z,1528882897.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:37.223Z,1528882897.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:37.605Z,1528882897.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:37.628Z,1528882897.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:37.997Z,1528882897.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:38.015Z,1528882898.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:38.395Z,1528882898.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:38.425Z,1528882898.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:38.806Z,1528882898.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:38.824Z,1528882898.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:39.206Z,1528882899.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:39.228Z,1528882899.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:39.606Z,1528882899.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:39.624Z,1528882899.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:39.994Z,1528882899.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:40.012Z,1528882900.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:40.397Z,1528882900.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:40.415Z,1528882900.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:40.806Z,1528882900.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:40.828Z,1528882900.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:41.207Z,1528882901.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:41.225Z,1528882901.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:41.607Z,1528882901.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:41.624Z,1528882901.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:41.995Z,1528882901.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:42.026Z,1528882902.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:42.387Z,1528882902.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:42.424Z,1528882902.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:42.807Z,1528882902.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:42.825Z,1528882902.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:43.210Z,1528882903.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:43.228Z,1528882903.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:43.608Z,1528882903.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:43.632Z,1528882903.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:43.995Z,1528882903.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:44.018Z,1528882904.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:44.395Z,1528882904.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:44.420Z,1528882904.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:44.807Z,1528882904.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:44.825Z,1528882904.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:45.210Z,1528882905.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:45.227Z,1528882905.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:45.606Z,1528882905.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:45.632Z,1528882905.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:45.987Z,1528882905.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:46.022Z,1528882906.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:46.392Z,1528882906.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:46.424Z,1528882906.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:46.807Z,1528882906.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:46.826Z,1528882906.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:47.208Z,1528882907.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:47.226Z,1528882907.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:47.610Z,1528882907.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:47.640Z,1528882907.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:47.991Z,1528882907.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:48.028Z,1528882908.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:48.391Z,1528882908.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:48.425Z,1528882908.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:48.811Z,1528882908.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:48.829Z,1528882908.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:49.216Z,1528882909.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:49.234Z,1528882909.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:49.608Z,1528882909.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:49.627Z,1528882909.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:49.991Z,1528882909.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:50.027Z,1528882910.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:50.391Z,1528882910.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:50.424Z,1528882910.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:50.813Z,1528882910.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:50.831Z,1528882910.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:51.216Z,1528882911.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:51.234Z,1528882911.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:51.612Z,1528882911.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:51.630Z,1528882911.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:51.988Z,1528882911.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:52.018Z,1528882912.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:52.392Z,1528882912.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:52.426Z,1528882912.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:52.802Z,1528882912.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:52.832Z,1528882912.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:53.210Z,1528882913.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:53.240Z,1528882913.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:53.606Z,1528882913.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:53.639Z,1528882913.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:53.995Z,1528882913.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:54.014Z,1528882914.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:54.390Z,1528882914.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:54.408Z,1528882914.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:54.806Z,1528882914.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:54.840Z,1528882914.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:55.205Z,1528882915.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:55.249Z,1528882915.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:55.605Z,1528882915.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:55.624Z,1528882915.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:55.996Z,1528882915.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:56.021Z,1528882916.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:56.396Z,1528882916.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:56.420Z,1528882916.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:56.801Z,1528882916.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:56.819Z,1528882916.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:57.205Z,1528882917.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:57.223Z,1528882917.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:57.602Z,1528882917.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:57.619Z,1528882917.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:57.994Z,1528882917.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:58.012Z,1528882918.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:58.390Z,1528882918.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:58.412Z,1528882918.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:58.807Z,1528882918.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:58.825Z,1528882918.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:59.207Z,1528882919.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:59.224Z,1528882919.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:59.605Z,1528882919.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:41:59.623Z,1528882919.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:41:59.997Z,1528882919.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:00.015Z,1528882920.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:03.109Z,1528882923.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:03.127Z,1528882923.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:03.269Z,1528882923.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:03.311Z,1528882923.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:03.665Z,1528882923.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:03.683Z,1528882923.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:04.066Z,1528882924.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:04.084Z,1528882924.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:04.456Z,1528882924.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:04.474Z,1528882924.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:04.857Z,1528882924.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:04.875Z,1528882924.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:05.255Z,1528882925.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:05.272Z,1528882925.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:05.656Z,1528882925.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:05.674Z,1528882925.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:06.061Z,1528882926.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:06.080Z,1528882926.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:06.461Z,1528882926.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:06.479Z,1528882926.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:06.862Z,1528882926.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:06.879Z,1528882926.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:07.256Z,1528882927.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:07.274Z,1528882927.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:07.655Z,1528882927.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:07.672Z,1528882927.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:08.056Z,1528882928.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:08.090Z,1528882928.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:08.455Z,1528882928.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:08.487Z,1528882928.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:08.865Z,1528882928.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:08.883Z,1528882928.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:09.265Z,1528882929.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:09.283Z,1528882929.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:09.663Z,1528882929.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:09.681Z,1528882929.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:10.054Z,1528882930.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:10.071Z,1528882930.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:10.455Z,1528882930.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:10.488Z,1528882930.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:10.867Z,1528882930.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:10.886Z,1528882930.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:11.267Z,1528882931.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:11.284Z,1528882931.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:11.665Z,1528882931.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:11.696Z,1528882931.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:12.052Z,1528882932.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:12.085Z,1528882932.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:12.447Z,1528882932.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:12.484Z,1528882932.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:12.867Z,1528882932.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:12.886Z,1528882932.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:13.271Z,1528882933.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:13.289Z,1528882933.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:13.667Z,1528882933.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:13.690Z,1528882933.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:14.052Z,1528882934.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:14.083Z,1528882934.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:14.451Z,1528882934.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:14.485Z,1528882934.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:14.869Z,1528882934.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:14.887Z,1528882934.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:15.266Z,1528882935.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:15.291Z,1528882935.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:15.666Z,1528882935.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:15.691Z,1528882935.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:16.048Z,1528882936.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:16.088Z,1528882936.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:16.451Z,1528882936.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:16.492Z,1528882936.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:16.867Z,1528882936.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:16.885Z,1528882936.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:17.268Z,1528882937.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:17.286Z,1528882937.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:17.667Z,1528882937.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:17.686Z,1528882937.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:18.051Z,1528882938.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:18.088Z,1528882938.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:18.452Z,1528882938.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:18.484Z,1528882938.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:18.868Z,1528882938.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:18.885Z,1528882938.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:19.270Z,1528882939.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:19.288Z,1528882939.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:19.660Z,1528882939.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:19.690Z,1528882939.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:20.052Z,1528882940.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:20.088Z,1528882940.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:20.452Z,1528882940.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:20.490Z,1528882940.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:20.861Z,1528882940.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:20.889Z,1528882940.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:21.262Z,1528882941.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:21.289Z,1528882941.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:21.661Z,1528882941.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:21.696Z,1528882941.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:22.048Z,1528882942.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:22.088Z,1528882942.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:22.451Z,1528882942.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:22.489Z,1528882942.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:22.861Z,1528882942.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:22.896Z,1528882942.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:23.269Z,1528882943.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:23.296Z,1528882943.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:23.666Z,1528882943.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:23.689Z,1528882943.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:24.054Z,1528882944.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:24.072Z,1528882944.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:24.451Z,1528882944.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:24.469Z,1528882944.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:24.869Z,1528882944.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:24.896Z,1528882944.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:25.269Z,1528882945.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:25.298Z,1528882945.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:25.669Z,1528882945.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:25.697Z,1528882945.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:26.056Z,1528882946.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:26.073Z,1528882946.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:26.454Z,1528882946.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:26.472Z,1528882946.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:26.861Z,1528882946.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:26.895Z,1528882946.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:27.265Z,1528882947.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:27.302Z,1528882947.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:27.665Z,1528882947.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:27.699Z,1528882947.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:28.055Z,1528882948.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:28.073Z,1528882948.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:28.454Z,1528882948.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:28.472Z,1528882948.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:28.865Z,1528882948.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:28.883Z,1528882948.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:29.261Z,1528882949.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:29.279Z,1528882949.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:29.662Z,1528882949.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:29.679Z,1528882949.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:30.058Z,1528882950.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:30.076Z,1528882950.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:30.454Z,1528882950.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:30.471Z,1528882950.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:30.861Z,1528882950.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:30.879Z,1528882950.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:31.265Z,1528882951.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:31.283Z,1528882951.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:31.661Z,1528882951.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:31.679Z,1528882951.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:32.056Z,1528882952.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:32.075Z,1528882952.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:32.456Z,1528882952.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:32.480Z,1528882952.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:32.861Z,1528882952.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:32.879Z,1528882952.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:33.297Z,1528882953.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:33.315Z,1528882953.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:33.658Z,1528882953.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:33.676Z,1528882953.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:34.054Z,1528882954.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:34.072Z,1528882954.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:34.457Z,1528882954.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:34.475Z,1528882954.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:34.865Z,1528882954.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:34.883Z,1528882954.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:35.261Z,1528882955.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:35.279Z,1528882955.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:35.662Z,1528882955.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:35.679Z,1528882955.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:36.059Z,1528882956.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:36.076Z,1528882956.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:36.454Z,1528882956.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:36.472Z,1528882956.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:36.864Z,1528882956.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:36.882Z,1528882956.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:37.265Z,1528882957.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:37.283Z,1528882957.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:37.663Z,1528882957.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:37.681Z,1528882957.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:38.059Z,1528882958.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:38.076Z,1528882958.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:38.456Z,1528882958.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:38.475Z,1528882958.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:38.863Z,1528882958.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:38.882Z,1528882958.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:39.266Z,1528882959.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:39.284Z,1528882959.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:39.670Z,1528882959.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:39.688Z,1528882959.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:40.058Z,1528882960.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:40.076Z,1528882960.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:40.455Z,1528882960.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:40.478Z,1528882960.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:40.862Z,1528882960.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:40.879Z,1528882960.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:41.262Z,1528882961.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:41.280Z,1528882961.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:41.665Z,1528882961.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:41.683Z,1528882961.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:42.057Z,1528882962.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:42.075Z,1528882962.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:42.454Z,1528882962.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:42.472Z,1528882962.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:42.862Z,1528882962.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:42.880Z,1528882962.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:43.265Z,1528882963.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:43.282Z,1528882963.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:43.664Z,1528882963.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:43.684Z,1528882963.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:44.058Z,1528882964.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:44.076Z,1528882964.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:44.458Z,1528882964.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:44.475Z,1528882964.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:44.863Z,1528882964.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:44.881Z,1528882964.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:45.265Z,1528882965.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:45.283Z,1528882965.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:45.662Z,1528882965.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:45.680Z,1528882965.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:46.058Z,1528882966.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:46.076Z,1528882966.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:46.458Z,1528882966.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:46.480Z,1528882966.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:46.869Z,1528882966.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:46.887Z,1528882966.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:47.263Z,1528882967.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:47.281Z,1528882967.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:47.662Z,1528882967.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:47.684Z,1528882967.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:48.057Z,1528882968.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:48.075Z,1528882968.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:48.460Z,1528882968.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:48.478Z,1528882968.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:48.855Z,1528882968.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:48.886Z,1528882968.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:49.263Z,1528882969.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:49.288Z,1528882969.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:49.663Z,1528882969.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:49.681Z,1528882969.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:50.063Z,1528882970.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:50.080Z,1528882970.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:50.452Z,1528882970.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:50.473Z,1528882970.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:50.854Z,1528882970.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:50.872Z,1528882970.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:51.254Z,1528882971.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:51.272Z,1528882971.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:51.656Z,1528882971.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:51.674Z,1528882971.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:52.065Z,1528882972.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:52.084Z,1528882972.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:52.465Z,1528882972.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:52.484Z,1528882972.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:52.863Z,1528882972.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:52.888Z,1528882972.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:53.258Z,1528882973.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:53.276Z,1528882973.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:53.657Z,1528882973.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:53.675Z,1528882973.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:54.056Z,1528882974.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:54.074Z,1528882974.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:54.458Z,1528882974.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:54.476Z,1528882974.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:54.855Z,1528882974.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:54.889Z,1528882974.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:55.264Z,1528882975.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:55.281Z,1528882975.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:55.671Z,1528882975.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:55.688Z,1528882975.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:56.067Z,1528882976.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:56.085Z,1528882976.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:56.451Z,1528882976.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:56.478Z,1528882976.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:56.851Z,1528882976.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:56.879Z,1528882976.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:57.252Z,1528882977.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:57.285Z,1528882977.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:57.650Z,1528882977.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:57.678Z,1528882977.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:58.072Z,1528882978.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:58.096Z,1528882978.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:58.471Z,1528882978.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:58.489Z,1528882978.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:58.867Z,1528882978.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:58.885Z,1528882978.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:59.251Z,1528882979.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:59.279Z,1528882979.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:59.661Z,1528882979.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:42:59.679Z,1528882979.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:42:59.682Z,1528882979.682 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T09:42:59.682Z,1528882979.682 [Default:CheckIn:C.Wait] Stopped
2018-06-13T09:42:59.682Z,1528882979.682 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T09:42:59.682Z,1528882979.682 [Default:CheckIn:D] Running Loop=1
2018-06-13T09:43:00.051Z,1528882980.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:00.083Z,1528882980.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:00.086Z,1528882980.086 [Default:CheckIn:D] Stopped
2018-06-13T09:43:00.086Z,1528882980.086 [Default:CheckIn:E] Running Loop=1
2018-06-13T09:43:00.456Z,1528882980.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:00.484Z,1528882980.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:00.487Z,1528882980.487 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 375.777344 min 
2018-06-13T09:43:00.488Z,1528882980.488 [Default:CheckIn:E] Stopped
2018-06-13T09:43:00.488Z,1528882980.488 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T09:43:00.488Z,1528882980.488 [Default:CheckIn] Stopped
2018-06-13T09:43:00.488Z,1528882980.488 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T09:43:00.488Z,1528882980.488 [Default:CheckIn](INFO): Running loop #37
2018-06-13T09:43:00.488Z,1528882980.488 [Default:CheckIn] Running Loop=37
2018-06-13T09:43:00.488Z,1528882980.488 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T09:43:00.488Z,1528882980.488 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T09:43:00.851Z,1528882980.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:00.868Z,1528882980.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:01.269Z,1528882981.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:01.304Z,1528882981.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:04.383Z,1528882984.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:04.402Z,1528882984.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:04.530Z,1528882984.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:04.547Z,1528882984.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:04.911Z,1528882984.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:04.945Z,1528882984.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:05.312Z,1528882985.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:05.350Z,1528882985.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:05.711Z,1528882985.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:05.728Z,1528882985.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:06.121Z,1528882986.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:06.153Z,1528882986.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:06.521Z,1528882986.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:06.555Z,1528882986.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:06.921Z,1528882986.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:06.954Z,1528882986.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:07.309Z,1528882987.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:07.327Z,1528882987.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:07.710Z,1528882987.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:07.728Z,1528882987.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:08.109Z,1528882988.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:08.128Z,1528882988.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:08.510Z,1528882988.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:08.528Z,1528882988.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:08.921Z,1528882988.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:08.955Z,1528882988.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:09.321Z,1528882989.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:09.354Z,1528882989.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:09.721Z,1528882989.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:09.754Z,1528882989.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:10.110Z,1528882990.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:10.128Z,1528882990.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:10.510Z,1528882990.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:10.527Z,1528882990.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:10.921Z,1528882990.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:10.955Z,1528882990.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:11.321Z,1528882991.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:11.355Z,1528882991.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:11.721Z,1528882991.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:11.754Z,1528882991.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:12.110Z,1528882992.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:12.128Z,1528882992.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:12.510Z,1528882992.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:12.528Z,1528882992.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:12.922Z,1528882992.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:12.955Z,1528882992.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:13.321Z,1528882993.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:13.355Z,1528882993.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:13.721Z,1528882993.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:13.755Z,1528882993.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:14.110Z,1528882994.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:14.132Z,1528882994.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:14.510Z,1528882994.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:14.528Z,1528882994.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:14.922Z,1528882994.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:14.959Z,1528882994.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:15.321Z,1528882995.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:15.355Z,1528882995.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:15.726Z,1528882995.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:15.759Z,1528882995.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:16.113Z,1528882996.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:16.131Z,1528882996.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:16.511Z,1528882996.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:16.529Z,1528882996.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:16.918Z,1528882996.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:16.935Z,1528882996.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:17.321Z,1528882997.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:17.339Z,1528882997.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:17.721Z,1528882997.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:17.739Z,1528882997.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:18.112Z,1528882998.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:18.142Z,1528882998.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:18.514Z,1528882998.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:18.532Z,1528882998.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:18.918Z,1528882998.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:18.940Z,1528882998.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:19.321Z,1528882999.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:19.339Z,1528882999.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:19.722Z,1528882999.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:19.740Z,1528882999.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:20.117Z,1528883000.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:20.135Z,1528883000.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:20.515Z,1528883000.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:20.533Z,1528883000.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:20.919Z,1528883000.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:20.938Z,1528883000.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:21.321Z,1528883001.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:21.339Z,1528883001.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:21.719Z,1528883001.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:21.745Z,1528883001.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:22.115Z,1528883002.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:22.140Z,1528883002.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:22.515Z,1528883002.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:22.533Z,1528883002.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:22.911Z,1528883002.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:22.936Z,1528883002.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:23.323Z,1528883003.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:23.341Z,1528883003.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:23.722Z,1528883003.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:23.744Z,1528883003.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:24.122Z,1528883004.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:24.140Z,1528883004.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:24.509Z,1528883004.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:24.528Z,1528883004.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:24.911Z,1528883004.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:24.934Z,1528883004.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:25.311Z,1528883005.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:25.336Z,1528883005.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:25.713Z,1528883005.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:25.731Z,1528883005.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:26.122Z,1528883006.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:26.139Z,1528883006.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:26.522Z,1528883006.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:26.548Z,1528883006.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:26.923Z,1528883006.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:26.941Z,1528883006.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:27.314Z,1528883007.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:27.332Z,1528883007.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:27.711Z,1528883007.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:27.735Z,1528883007.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:28.110Z,1528883008.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:28.127Z,1528883008.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:28.503Z,1528883008.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:28.542Z,1528883008.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:28.907Z,1528883008.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:28.944Z,1528883008.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:29.329Z,1528883009.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:29.347Z,1528883009.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:29.727Z,1528883009.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:29.745Z,1528883009.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:30.124Z,1528883010.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:30.142Z,1528883010.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:30.503Z,1528883010.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:30.529Z,1528883010.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:30.908Z,1528883010.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:30.938Z,1528883010.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:31.308Z,1528883011.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:31.335Z,1528883011.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:31.707Z,1528883011.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:31.725Z,1528883011.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:32.121Z,1528883012.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:32.156Z,1528883012.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:32.525Z,1528883012.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:32.554Z,1528883012.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:32.926Z,1528883012.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:32.954Z,1528883012.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:33.311Z,1528883013.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:33.356Z,1528883013.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:33.710Z,1528883013.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:33.728Z,1528883013.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:34.110Z,1528883014.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:34.128Z,1528883014.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:34.510Z,1528883014.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:34.532Z,1528883014.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:34.910Z,1528883014.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:34.928Z,1528883014.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:35.317Z,1528883015.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:35.336Z,1528883015.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:35.721Z,1528883015.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:35.739Z,1528883015.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:36.118Z,1528883016.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:36.136Z,1528883016.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:36.512Z,1528883016.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:36.530Z,1528883016.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:36.912Z,1528883016.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:36.930Z,1528883016.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:37.312Z,1528883017.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:37.330Z,1528883017.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:37.712Z,1528883017.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:37.730Z,1528883017.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:38.117Z,1528883018.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:38.136Z,1528883018.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:38.521Z,1528883018.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:38.539Z,1528883018.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:38.921Z,1528883018.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:38.939Z,1528883018.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:39.312Z,1528883019.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:39.329Z,1528883019.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:39.712Z,1528883019.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:39.730Z,1528883019.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:40.110Z,1528883020.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:40.128Z,1528883020.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:40.512Z,1528883020.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:40.530Z,1528883020.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:40.913Z,1528883020.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:40.931Z,1528883020.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:41.321Z,1528883021.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:41.339Z,1528883021.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:41.721Z,1528883021.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:41.739Z,1528883021.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:42.118Z,1528883022.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:42.135Z,1528883022.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:42.510Z,1528883022.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:42.527Z,1528883022.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:42.912Z,1528883022.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:42.930Z,1528883022.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:43.312Z,1528883023.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:43.330Z,1528883023.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:43.714Z,1528883023.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:43.732Z,1528883023.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:44.118Z,1528883024.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:44.135Z,1528883024.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:44.525Z,1528883024.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:44.559Z,1528883024.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:44.921Z,1528883024.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:44.939Z,1528883024.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:45.312Z,1528883025.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:45.329Z,1528883025.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:45.713Z,1528883025.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:45.731Z,1528883025.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:46.113Z,1528883026.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:46.131Z,1528883026.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:46.514Z,1528883026.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:46.532Z,1528883026.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:46.911Z,1528883026.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:46.945Z,1528883026.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:47.322Z,1528883027.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:47.340Z,1528883027.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:47.723Z,1528883027.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:47.740Z,1528883027.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:48.122Z,1528883028.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:48.140Z,1528883028.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:48.510Z,1528883028.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:48.528Z,1528883028.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:48.913Z,1528883028.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:48.930Z,1528883028.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:49.318Z,1528883029.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:49.336Z,1528883029.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:49.713Z,1528883029.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:49.731Z,1528883029.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:50.122Z,1528883030.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:50.144Z,1528883030.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:50.522Z,1528883030.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:50.544Z,1528883030.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:50.923Z,1528883030.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:50.940Z,1528883030.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:51.317Z,1528883031.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:51.334Z,1528883031.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:51.712Z,1528883031.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:51.730Z,1528883031.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:52.103Z,1528883032.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:52.137Z,1528883032.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:52.507Z,1528883032.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:52.539Z,1528883032.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:52.917Z,1528883032.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:52.935Z,1528883032.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:53.328Z,1528883033.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:53.346Z,1528883033.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:53.727Z,1528883033.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:53.745Z,1528883033.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:54.127Z,1528883034.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:54.145Z,1528883034.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:54.507Z,1528883034.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:54.536Z,1528883034.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:54.907Z,1528883034.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:54.943Z,1528883034.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:55.308Z,1528883035.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:55.338Z,1528883035.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:55.717Z,1528883035.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:55.734Z,1528883035.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:56.127Z,1528883036.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:56.144Z,1528883036.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:56.530Z,1528883036.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:56.553Z,1528883036.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:56.923Z,1528883036.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:56.941Z,1528883036.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:57.317Z,1528883037.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:57.335Z,1528883037.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:57.718Z,1528883037.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:57.736Z,1528883037.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:58.107Z,1528883038.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:58.145Z,1528883038.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:58.507Z,1528883038.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:58.535Z,1528883038.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:58.909Z,1528883038.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:58.944Z,1528883038.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:59.324Z,1528883039.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:59.344Z,1528883039.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:43:59.728Z,1528883039.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:43:59.752Z,1528883039.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:00.131Z,1528883040.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:00.148Z,1528883040.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:03.233Z,1528883043.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:03.251Z,1528883043.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:03.360Z,1528883043.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:03.396Z,1528883043.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:03.776Z,1528883043.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:03.794Z,1528883043.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:04.177Z,1528883044.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:04.195Z,1528883044.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:04.575Z,1528883044.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:04.593Z,1528883044.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:04.956Z,1528883044.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:04.988Z,1528883044.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:05.357Z,1528883045.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:05.391Z,1528883045.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:05.756Z,1528883045.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:05.796Z,1528883045.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:06.178Z,1528883046.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:06.196Z,1528883046.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:06.566Z,1528883046.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:06.596Z,1528883046.596 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:06.596Z,1528883046.596 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 126
2018-06-13T09:44:06.596Z,1528883046.596 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:44:06.602Z,1528883046.602 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:06.602Z,1528883046.602 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 126
2018-06-13T09:44:06.603Z,1528883046.603 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:44:06.604Z,1528883046.604 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:06.604Z,1528883046.604 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 126
2018-06-13T09:44:06.604Z,1528883046.604 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:44:06.689Z,1528883046.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:44:06.689Z,1528883046.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:44:06.690Z,1528883046.690 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:44:06.966Z,1528883046.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:07.077Z,1528883047.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:44:07.077Z,1528883047.077 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 126
2018-06-13T09:44:07.077Z,1528883047.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:44:07.077Z,1528883047.077 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 126
2018-06-13T09:44:07.078Z,1528883047.078 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:44:07.078Z,1528883047.078 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 126
2018-06-13T09:44:07.355Z,1528883047.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:07.372Z,1528883047.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:44:07.390Z,1528883047.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:44:07.390Z,1528883047.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:44:07.390Z,1528883047.390 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:44:07.391Z,1528883047.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:44:07.391Z,1528883047.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:44:07.391Z,1528883047.391 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:44:07.392Z,1528883047.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:44:07.392Z,1528883047.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:44:07.759Z,1528883047.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:07.798Z,1528883047.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:44:07.799Z,1528883047.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:08.160Z,1528883048.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:08.178Z,1528883048.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:44:08.179Z,1528883048.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:08.558Z,1528883048.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:08.576Z,1528883048.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:44:08.577Z,1528883048.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:08.957Z,1528883048.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:08.974Z,1528883048.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:44:08.975Z,1528883048.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:09.365Z,1528883049.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:09.383Z,1528883049.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:44:09.384Z,1528883049.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:09.769Z,1528883049.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:09.787Z,1528883049.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:44:09.788Z,1528883049.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:10.166Z,1528883050.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:10.184Z,1528883050.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:44:10.185Z,1528883050.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:10.560Z,1528883050.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:10.584Z,1528883050.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:44:10.585Z,1528883050.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:10.960Z,1528883050.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:10.978Z,1528883050.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:44:10.979Z,1528883050.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:11.358Z,1528883051.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:11.379Z,1528883051.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:44:11.380Z,1528883051.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:11.759Z,1528883051.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:11.788Z,1528883051.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:44:11.794Z,1528883051.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:12.170Z,1528883052.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:12.189Z,1528883052.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:44:12.190Z,1528883052.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:12.571Z,1528883052.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:12.588Z,1528883052.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:44:12.590Z,1528883052.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:12.974Z,1528883052.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:12.992Z,1528883052.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:44:12.993Z,1528883052.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:13.361Z,1528883053.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:13.379Z,1528883053.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:44:13.380Z,1528883053.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:13.751Z,1528883053.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:13.785Z,1528883053.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:44:13.786Z,1528883053.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:14.155Z,1528883054.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:14.191Z,1528883054.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:44:14.192Z,1528883054.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:14.566Z,1528883054.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:14.584Z,1528883054.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:44:14.585Z,1528883054.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:14.956Z,1528883054.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:14.987Z,1528883054.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:44:14.987Z,1528883054.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:15.371Z,1528883055.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:15.388Z,1528883055.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:44:15.389Z,1528883055.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:15.774Z,1528883055.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:15.803Z,1528883055.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:44:15.804Z,1528883055.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:16.173Z,1528883056.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:16.190Z,1528883056.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:44:16.191Z,1528883056.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:16.559Z,1528883056.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:16.586Z,1528883056.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:44:16.587Z,1528883056.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:16.955Z,1528883056.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:16.998Z,1528883056.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:44:16.999Z,1528883056.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:17.356Z,1528883057.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:17.386Z,1528883057.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:44:17.386Z,1528883057.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:17.755Z,1528883057.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:17.791Z,1528883057.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:44:17.792Z,1528883057.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:18.176Z,1528883058.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:18.194Z,1528883058.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:44:18.195Z,1528883058.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:18.575Z,1528883058.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:18.594Z,1528883058.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:44:18.595Z,1528883058.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:18.970Z,1528883058.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:18.994Z,1528883058.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:44:18.994Z,1528883058.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:19.355Z,1528883059.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:19.392Z,1528883059.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:44:19.393Z,1528883059.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:19.756Z,1528883059.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:19.790Z,1528883059.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:44:19.791Z,1528883059.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:20.155Z,1528883060.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:20.188Z,1528883060.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:44:20.193Z,1528883060.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:20.556Z,1528883060.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:20.581Z,1528883060.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:44:20.582Z,1528883060.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:20.955Z,1528883060.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:20.972Z,1528883060.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:44:20.974Z,1528883060.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:21.373Z,1528883061.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:21.400Z,1528883061.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:44:21.401Z,1528883061.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:21.774Z,1528883061.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:21.802Z,1528883061.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:44:21.803Z,1528883061.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:22.169Z,1528883062.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:22.205Z,1528883062.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:44:22.206Z,1528883062.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:22.559Z,1528883062.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:22.576Z,1528883062.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:44:22.577Z,1528883062.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:22.960Z,1528883062.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:22.978Z,1528883062.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:44:22.979Z,1528883062.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:23.358Z,1528883063.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:23.376Z,1528883063.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:44:23.377Z,1528883063.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:23.760Z,1528883063.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:23.784Z,1528883063.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:44:23.786Z,1528883063.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:24.166Z,1528883064.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:24.183Z,1528883064.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:44:24.184Z,1528883064.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:24.565Z,1528883064.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:24.583Z,1528883064.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:44:24.584Z,1528883064.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:24.973Z,1528883064.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:24.991Z,1528883064.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:44:24.992Z,1528883064.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:25.361Z,1528883065.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:25.379Z,1528883065.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:44:25.379Z,1528883065.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:25.756Z,1528883065.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:25.778Z,1528883065.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:44:25.779Z,1528883065.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:26.164Z,1528883066.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:26.182Z,1528883066.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:44:26.183Z,1528883066.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:26.563Z,1528883066.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:26.581Z,1528883066.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T09:44:26.582Z,1528883066.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:26.962Z,1528883066.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:26.980Z,1528883066.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:27.370Z,1528883067.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:27.388Z,1528883067.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:27.771Z,1528883067.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:27.788Z,1528883067.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:28.171Z,1528883068.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:28.189Z,1528883068.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:28.565Z,1528883068.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:28.588Z,1528883068.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:28.959Z,1528883068.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:28.983Z,1528883068.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:29.364Z,1528883069.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:29.388Z,1528883069.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:29.766Z,1528883069.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:29.784Z,1528883069.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:30.170Z,1528883070.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:30.188Z,1528883070.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:30.571Z,1528883070.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:30.588Z,1528883070.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:30.973Z,1528883070.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:30.991Z,1528883070.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:31.365Z,1528883071.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:31.388Z,1528883071.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:31.762Z,1528883071.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:31.780Z,1528883071.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:32.159Z,1528883072.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:32.182Z,1528883072.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:32.560Z,1528883072.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:32.582Z,1528883072.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:32.961Z,1528883072.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:32.978Z,1528883072.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:33.375Z,1528883073.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:33.393Z,1528883073.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:33.774Z,1528883073.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:33.796Z,1528883073.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:34.174Z,1528883074.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:34.204Z,1528883074.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:34.564Z,1528883074.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:34.582Z,1528883074.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:34.965Z,1528883074.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:34.988Z,1528883074.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:35.356Z,1528883075.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:35.388Z,1528883075.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:35.756Z,1528883075.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:35.788Z,1528883075.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:36.174Z,1528883076.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:36.209Z,1528883076.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:36.576Z,1528883076.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:36.594Z,1528883076.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:36.975Z,1528883076.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:37.001Z,1528883077.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:37.355Z,1528883077.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:37.399Z,1528883077.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:37.752Z,1528883077.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:37.782Z,1528883077.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:38.160Z,1528883078.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:38.199Z,1528883078.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:38.566Z,1528883078.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:38.584Z,1528883078.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:38.966Z,1528883078.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:38.984Z,1528883078.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:39.371Z,1528883079.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:39.396Z,1528883079.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:39.775Z,1528883079.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:39.793Z,1528883079.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:40.177Z,1528883080.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:40.194Z,1528883080.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:40.555Z,1528883080.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:40.599Z,1528883080.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:40.968Z,1528883080.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:40.986Z,1528883080.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:41.354Z,1528883081.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:41.389Z,1528883081.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:41.759Z,1528883081.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:41.787Z,1528883081.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:42.171Z,1528883082.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:42.208Z,1528883082.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:42.575Z,1528883082.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:42.593Z,1528883082.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:42.970Z,1528883082.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:42.995Z,1528883082.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:43.358Z,1528883083.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:43.401Z,1528883083.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:43.755Z,1528883083.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:43.800Z,1528883083.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:44.156Z,1528883084.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:44.200Z,1528883084.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:44.559Z,1528883084.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:44.596Z,1528883084.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:44.954Z,1528883084.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:44.984Z,1528883084.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:45.380Z,1528883085.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:45.399Z,1528883085.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:45.774Z,1528883085.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:45.808Z,1528883085.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:46.176Z,1528883086.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:46.194Z,1528883086.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:46.558Z,1528883086.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:46.587Z,1528883086.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:46.955Z,1528883086.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:47.004Z,1528883087.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:47.351Z,1528883087.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:47.390Z,1528883087.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:47.758Z,1528883087.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:47.788Z,1528883087.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:48.173Z,1528883088.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:48.191Z,1528883088.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:48.565Z,1528883088.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:48.599Z,1528883088.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:48.970Z,1528883088.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:48.999Z,1528883088.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:49.355Z,1528883089.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:49.392Z,1528883089.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:49.755Z,1528883089.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:49.789Z,1528883089.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:50.155Z,1528883090.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:50.196Z,1528883090.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:50.551Z,1528883090.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:50.587Z,1528883090.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:50.955Z,1528883090.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:50.998Z,1528883090.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:51.370Z,1528883091.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:51.408Z,1528883091.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:51.770Z,1528883091.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:51.808Z,1528883091.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:52.165Z,1528883092.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:52.200Z,1528883092.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:52.560Z,1528883092.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:52.598Z,1528883092.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:52.960Z,1528883092.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:52.978Z,1528883092.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:53.355Z,1528883093.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:53.407Z,1528883093.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:53.758Z,1528883093.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:53.784Z,1528883093.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:54.172Z,1528883094.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:54.206Z,1528883094.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:54.568Z,1528883094.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:54.586Z,1528883094.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:54.966Z,1528883094.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:55.009Z,1528883095.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:55.365Z,1528883095.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:55.388Z,1528883095.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:55.760Z,1528883095.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:55.783Z,1528883095.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:56.162Z,1528883096.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:56.188Z,1528883096.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:56.560Z,1528883096.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:56.613Z,1528883096.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:56.958Z,1528883096.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:56.978Z,1528883096.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:57.366Z,1528883097.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:57.389Z,1528883097.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:57.767Z,1528883097.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:57.785Z,1528883097.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:58.166Z,1528883098.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:58.211Z,1528883098.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:58.560Z,1528883098.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:58.580Z,1528883098.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:58.959Z,1528883098.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:58.983Z,1528883098.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:59.362Z,1528883099.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:59.383Z,1528883099.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:44:59.762Z,1528883099.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:44:59.816Z,1528883099.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:00.173Z,1528883100.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:00.208Z,1528883100.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:03.289Z,1528883103.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:03.316Z,1528883103.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:03.454Z,1528883103.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:03.472Z,1528883103.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:03.835Z,1528883103.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:03.872Z,1528883103.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:04.231Z,1528883104.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:04.273Z,1528883104.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:04.636Z,1528883104.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:04.674Z,1528883104.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:05.030Z,1528883105.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:05.047Z,1528883105.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:05.441Z,1528883105.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:05.480Z,1528883105.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:05.845Z,1528883105.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:05.869Z,1528883105.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:06.244Z,1528883106.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:06.276Z,1528883106.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:06.631Z,1528883106.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:06.649Z,1528883106.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:07.031Z,1528883107.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:07.066Z,1528883107.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:07.439Z,1528883107.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:07.457Z,1528883107.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:07.835Z,1528883107.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:07.853Z,1528883107.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:08.245Z,1528883108.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:08.283Z,1528883108.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:08.645Z,1528883108.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:08.662Z,1528883108.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:09.045Z,1528883109.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:09.063Z,1528883109.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:09.438Z,1528883109.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:09.455Z,1528883109.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:09.836Z,1528883109.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:09.860Z,1528883109.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:10.237Z,1528883110.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:10.255Z,1528883110.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:10.637Z,1528883110.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:10.655Z,1528883110.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:11.038Z,1528883111.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:11.055Z,1528883111.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:11.450Z,1528883111.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:11.468Z,1528883111.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:11.845Z,1528883111.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:11.863Z,1528883111.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:12.245Z,1528883112.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:12.268Z,1528883112.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:12.640Z,1528883112.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:12.658Z,1528883112.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:13.035Z,1528883113.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:13.067Z,1528883113.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:13.435Z,1528883113.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:13.464Z,1528883113.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:13.838Z,1528883113.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:13.860Z,1528883113.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:14.246Z,1528883114.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:14.268Z,1528883114.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:14.649Z,1528883114.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:14.666Z,1528883114.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:15.045Z,1528883115.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:15.063Z,1528883115.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:15.435Z,1528883115.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:15.465Z,1528883115.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:15.840Z,1528883115.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:15.857Z,1528883115.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:16.242Z,1528883116.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:16.268Z,1528883116.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:16.638Z,1528883116.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:16.655Z,1528883116.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:17.041Z,1528883117.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:17.064Z,1528883117.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:17.448Z,1528883117.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:17.466Z,1528883117.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:17.849Z,1528883117.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:17.867Z,1528883117.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:18.246Z,1528883118.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:18.268Z,1528883118.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:18.639Z,1528883118.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:18.656Z,1528883118.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:19.038Z,1528883119.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:19.070Z,1528883119.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:19.441Z,1528883119.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:19.459Z,1528883119.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:19.842Z,1528883119.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:19.864Z,1528883119.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:20.245Z,1528883120.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:20.263Z,1528883120.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:20.649Z,1528883120.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:20.667Z,1528883120.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:21.048Z,1528883121.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:21.072Z,1528883121.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:21.438Z,1528883121.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:21.455Z,1528883121.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:21.835Z,1528883121.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:21.859Z,1528883121.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:22.238Z,1528883122.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:22.261Z,1528883122.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:22.641Z,1528883122.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:22.659Z,1528883122.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:23.040Z,1528883123.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:23.065Z,1528883123.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:23.449Z,1528883123.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:23.467Z,1528883123.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:23.850Z,1528883123.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:23.868Z,1528883123.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:24.246Z,1528883124.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:24.283Z,1528883124.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:24.643Z,1528883124.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:24.660Z,1528883124.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:25.041Z,1528883125.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:25.064Z,1528883125.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:25.437Z,1528883125.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:25.472Z,1528883125.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:25.841Z,1528883125.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:25.859Z,1528883125.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:26.249Z,1528883126.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:26.267Z,1528883126.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:26.650Z,1528883126.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:26.676Z,1528883126.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:27.056Z,1528883127.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:27.074Z,1528883127.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:27.440Z,1528883127.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:27.464Z,1528883127.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:27.840Z,1528883127.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:27.859Z,1528883127.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:28.243Z,1528883128.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:28.260Z,1528883128.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:28.637Z,1528883128.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:28.665Z,1528883128.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:29.035Z,1528883129.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:29.069Z,1528883129.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:29.452Z,1528883129.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:29.476Z,1528883129.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:29.855Z,1528883129.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:29.872Z,1528883129.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:30.258Z,1528883130.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:30.276Z,1528883130.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:30.644Z,1528883130.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:30.662Z,1528883130.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:31.038Z,1528883131.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:31.064Z,1528883131.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:31.435Z,1528883131.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:31.466Z,1528883131.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:31.831Z,1528883131.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:31.865Z,1528883131.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:32.256Z,1528883132.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:32.274Z,1528883132.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:32.650Z,1528883132.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:32.694Z,1528883132.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:33.049Z,1528883133.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:33.067Z,1528883133.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:33.432Z,1528883133.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:33.476Z,1528883133.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:33.831Z,1528883133.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:33.880Z,1528883133.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:34.229Z,1528883134.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:34.260Z,1528883134.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:34.635Z,1528883134.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:34.663Z,1528883134.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:35.031Z,1528883135.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:35.080Z,1528883135.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:35.451Z,1528883135.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:35.502Z,1528883135.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:35.851Z,1528883135.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:35.886Z,1528883135.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:36.246Z,1528883136.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:36.270Z,1528883136.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:36.627Z,1528883136.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:36.670Z,1528883136.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:37.031Z,1528883137.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:37.059Z,1528883137.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:37.433Z,1528883137.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:37.469Z,1528883137.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:37.834Z,1528883137.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:37.868Z,1528883137.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:38.254Z,1528883138.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:38.279Z,1528883138.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:38.655Z,1528883138.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:38.674Z,1528883138.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:39.044Z,1528883139.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:39.086Z,1528883139.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:39.434Z,1528883139.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:39.472Z,1528883139.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:39.831Z,1528883139.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:39.876Z,1528883139.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:40.228Z,1528883140.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:40.266Z,1528883140.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:40.632Z,1528883140.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:40.671Z,1528883140.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:41.034Z,1528883141.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:41.060Z,1528883141.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:41.441Z,1528883141.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:41.488Z,1528883141.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:41.847Z,1528883141.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:41.884Z,1528883141.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:42.246Z,1528883142.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:42.264Z,1528883142.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:42.639Z,1528883142.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:42.658Z,1528883142.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:43.036Z,1528883143.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:43.085Z,1528883143.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:43.437Z,1528883143.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:43.460Z,1528883143.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:43.837Z,1528883143.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:43.860Z,1528883143.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:44.244Z,1528883144.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:44.263Z,1528883144.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:44.645Z,1528883144.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:44.689Z,1528883144.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:45.045Z,1528883145.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:45.068Z,1528883145.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:45.437Z,1528883145.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:45.459Z,1528883145.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:45.840Z,1528883145.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:45.858Z,1528883145.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:46.238Z,1528883146.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:46.286Z,1528883146.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:46.638Z,1528883146.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:46.659Z,1528883146.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:47.035Z,1528883147.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:47.080Z,1528883147.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:47.446Z,1528883147.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:47.463Z,1528883147.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:47.842Z,1528883147.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:47.886Z,1528883147.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:48.243Z,1528883148.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:48.290Z,1528883148.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:48.638Z,1528883148.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:48.661Z,1528883148.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:49.038Z,1528883149.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:49.060Z,1528883149.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:49.435Z,1528883149.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:49.485Z,1528883149.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:49.839Z,1528883149.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:49.857Z,1528883149.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:50.245Z,1528883150.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:50.267Z,1528883150.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:50.648Z,1528883150.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:50.666Z,1528883150.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:51.047Z,1528883151.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:51.093Z,1528883151.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:51.437Z,1528883151.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:51.462Z,1528883151.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:51.838Z,1528883151.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:51.861Z,1528883151.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:52.238Z,1528883152.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:52.260Z,1528883152.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:52.638Z,1528883152.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:52.656Z,1528883152.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:53.037Z,1528883153.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:53.055Z,1528883153.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:53.447Z,1528883153.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:53.470Z,1528883153.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:53.848Z,1528883153.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:53.876Z,1528883153.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:54.246Z,1528883154.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:54.297Z,1528883154.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:54.635Z,1528883154.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:54.653Z,1528883154.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:55.036Z,1528883155.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:55.065Z,1528883155.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:55.438Z,1528883155.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:55.461Z,1528883155.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:55.834Z,1528883155.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:55.851Z,1528883155.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:56.246Z,1528883156.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:56.270Z,1528883156.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:56.648Z,1528883156.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:56.673Z,1528883156.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:57.047Z,1528883157.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:57.070Z,1528883157.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:57.438Z,1528883157.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:57.472Z,1528883157.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:57.837Z,1528883157.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:57.860Z,1528883157.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:58.238Z,1528883158.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:58.256Z,1528883158.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:58.638Z,1528883158.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:58.666Z,1528883158.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:59.037Z,1528883159.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:59.055Z,1528883159.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:59.447Z,1528883159.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:59.465Z,1528883159.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:45:59.846Z,1528883159.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:45:59.873Z,1528883159.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:00.246Z,1528883160.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:00.269Z,1528883160.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:03.350Z,1528883163.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:03.369Z,1528883163.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:03.502Z,1528883163.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:03.520Z,1528883163.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:03.917Z,1528883163.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:03.944Z,1528883163.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:04.331Z,1528883164.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:04.349Z,1528883164.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:04.713Z,1528883164.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:04.746Z,1528883164.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:05.102Z,1528883165.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:05.120Z,1528883165.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:05.502Z,1528883165.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:05.519Z,1528883165.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:05.906Z,1528883165.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:05.944Z,1528883165.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:06.317Z,1528883166.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:06.350Z,1528883166.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:06.714Z,1528883166.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:06.747Z,1528883166.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:07.115Z,1528883167.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:07.132Z,1528883167.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:07.509Z,1528883167.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:07.527Z,1528883167.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:07.906Z,1528883167.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:07.924Z,1528883167.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:08.306Z,1528883168.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:08.324Z,1528883168.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:08.707Z,1528883168.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:08.726Z,1528883168.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:09.102Z,1528883169.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:09.128Z,1528883169.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:09.514Z,1528883169.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:09.531Z,1528883169.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:09.917Z,1528883169.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:09.935Z,1528883169.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:10.313Z,1528883170.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:10.336Z,1528883170.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:10.704Z,1528883170.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:10.731Z,1528883170.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:11.108Z,1528883171.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:11.126Z,1528883171.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:11.507Z,1528883171.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:11.525Z,1528883171.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:11.903Z,1528883171.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:11.929Z,1528883171.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:12.315Z,1528883172.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:12.350Z,1528883172.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:12.716Z,1528883172.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:12.733Z,1528883172.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:13.118Z,1528883173.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:13.140Z,1528883173.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:13.494Z,1528883173.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:13.527Z,1528883173.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:13.896Z,1528883173.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:13.931Z,1528883173.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:14.313Z,1528883174.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:14.331Z,1528883174.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:14.710Z,1528883174.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:14.728Z,1528883174.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:15.099Z,1528883175.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:15.133Z,1528883175.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:15.515Z,1528883175.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:15.549Z,1528883175.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:15.922Z,1528883175.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:15.940Z,1528883175.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:16.318Z,1528883176.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:16.335Z,1528883176.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:16.700Z,1528883176.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:16.732Z,1528883176.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:17.100Z,1528883177.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:17.133Z,1528883177.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:17.500Z,1528883177.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:17.537Z,1528883177.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:17.909Z,1528883177.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:17.927Z,1528883177.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:18.321Z,1528883178.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:18.339Z,1528883178.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:18.718Z,1528883178.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:18.744Z,1528883178.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:19.125Z,1528883179.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:19.143Z,1528883179.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:19.502Z,1528883179.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:19.536Z,1528883179.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:19.895Z,1528883179.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:19.943Z,1528883179.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:20.299Z,1528883180.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:20.340Z,1528883180.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:20.702Z,1528883180.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:20.740Z,1528883180.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:21.101Z,1528883181.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:21.139Z,1528883181.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:21.509Z,1528883181.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:21.542Z,1528883181.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:21.922Z,1528883181.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:21.941Z,1528883181.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:22.323Z,1528883182.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:22.340Z,1528883182.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:22.702Z,1528883182.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:22.743Z,1528883182.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:23.099Z,1528883183.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:23.140Z,1528883183.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:23.496Z,1528883183.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:23.542Z,1528883183.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:23.900Z,1528883183.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:23.934Z,1528883183.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:24.317Z,1528883184.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:24.346Z,1528883184.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:24.717Z,1528883184.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:24.750Z,1528883184.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:25.120Z,1528883185.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:25.149Z,1528883185.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:25.505Z,1528883185.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:25.542Z,1528883185.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:25.906Z,1528883185.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:25.924Z,1528883185.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:26.302Z,1528883186.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:26.348Z,1528883186.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:26.735Z,1528883186.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:26.753Z,1528883186.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:27.098Z,1528883187.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:27.143Z,1528883187.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:27.515Z,1528883187.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:27.560Z,1528883187.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:27.914Z,1528883187.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:27.960Z,1528883187.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:28.310Z,1528883188.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:28.342Z,1528883188.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:28.700Z,1528883188.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:28.747Z,1528883188.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:29.101Z,1528883189.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:29.144Z,1528883189.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:29.498Z,1528883189.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:29.548Z,1528883189.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:29.899Z,1528883189.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:29.940Z,1528883189.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:30.315Z,1528883190.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:30.357Z,1528883190.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:30.720Z,1528883190.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:30.754Z,1528883190.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:31.109Z,1528883191.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:31.153Z,1528883191.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:31.498Z,1528883191.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:31.539Z,1528883191.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:31.902Z,1528883191.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:31.924Z,1528883191.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:32.306Z,1528883192.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:32.327Z,1528883192.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:32.706Z,1528883192.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:32.755Z,1528883192.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:33.106Z,1528883193.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:33.124Z,1528883193.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:33.510Z,1528883193.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:33.533Z,1528883193.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:33.916Z,1528883193.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:33.934Z,1528883193.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:34.310Z,1528883194.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:34.358Z,1528883194.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:34.705Z,1528883194.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:34.723Z,1528883194.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:35.103Z,1528883195.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:35.140Z,1528883195.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:35.504Z,1528883195.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:35.526Z,1528883195.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:35.903Z,1528883195.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:35.925Z,1528883195.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:36.314Z,1528883196.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:36.335Z,1528883196.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:36.714Z,1528883196.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:36.737Z,1528883196.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:37.116Z,1528883197.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:37.140Z,1528883197.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:37.505Z,1528883197.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:37.540Z,1528883197.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:37.905Z,1528883197.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:37.923Z,1528883197.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:38.306Z,1528883198.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:38.326Z,1528883198.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:38.706Z,1528883198.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:38.728Z,1528883198.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:39.102Z,1528883199.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:39.119Z,1528883199.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:39.510Z,1528883199.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:39.543Z,1528883199.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:39.919Z,1528883199.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:39.942Z,1528883199.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:40.323Z,1528883200.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:40.342Z,1528883200.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:40.699Z,1528883200.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:40.743Z,1528883200.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:41.099Z,1528883201.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:41.129Z,1528883201.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:41.496Z,1528883201.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:41.538Z,1528883201.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:41.899Z,1528883201.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:41.928Z,1528883201.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:42.309Z,1528883202.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:42.344Z,1528883202.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:42.713Z,1528883202.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:42.744Z,1528883202.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:43.109Z,1528883203.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:43.142Z,1528883203.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:43.499Z,1528883203.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:43.533Z,1528883203.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:43.895Z,1528883203.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:43.913Z,1528883203.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:44.300Z,1528883204.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:44.343Z,1528883204.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:44.706Z,1528883204.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:44.724Z,1528883204.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:45.106Z,1528883205.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:45.126Z,1528883205.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:45.510Z,1528883205.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:45.528Z,1528883205.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:45.914Z,1528883205.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:45.936Z,1528883205.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:46.315Z,1528883206.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:46.333Z,1528883206.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:46.703Z,1528883206.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:46.727Z,1528883206.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:47.106Z,1528883207.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:47.124Z,1528883207.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:47.502Z,1528883207.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:47.520Z,1528883207.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:47.903Z,1528883207.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:47.925Z,1528883207.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:48.314Z,1528883208.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:48.338Z,1528883208.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:48.714Z,1528883208.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:48.732Z,1528883208.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:49.115Z,1528883209.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:49.132Z,1528883209.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:49.503Z,1528883209.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:49.542Z,1528883209.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:49.895Z,1528883209.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:49.921Z,1528883209.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:50.299Z,1528883210.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:50.333Z,1528883210.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:50.699Z,1528883210.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:50.744Z,1528883210.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:51.103Z,1528883211.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:51.122Z,1528883211.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:51.517Z,1528883211.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:51.558Z,1528883211.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:51.917Z,1528883211.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:51.951Z,1528883211.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:52.313Z,1528883212.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:52.351Z,1528883212.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:52.703Z,1528883212.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:52.721Z,1528883212.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:53.104Z,1528883213.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:53.122Z,1528883213.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:53.502Z,1528883213.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:53.520Z,1528883213.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:53.906Z,1528883213.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:53.924Z,1528883213.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:54.309Z,1528883214.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:54.328Z,1528883214.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:54.709Z,1528883214.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:54.727Z,1528883214.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:55.121Z,1528883215.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:55.159Z,1528883215.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:55.506Z,1528883215.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:55.523Z,1528883215.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:55.901Z,1528883215.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:55.920Z,1528883215.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:56.306Z,1528883216.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:56.336Z,1528883216.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:56.700Z,1528883216.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:56.730Z,1528883216.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:57.095Z,1528883217.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:57.132Z,1528883217.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:57.521Z,1528883217.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:57.539Z,1528883217.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:57.916Z,1528883217.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:57.935Z,1528883217.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:58.317Z,1528883218.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:58.335Z,1528883218.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:58.700Z,1528883218.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:58.731Z,1528883218.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:59.099Z,1528883219.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:59.127Z,1528883219.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:59.496Z,1528883219.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:59.539Z,1528883219.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:46:59.903Z,1528883219.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:46:59.931Z,1528883219.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:00.319Z,1528883220.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:00.338Z,1528883220.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:00.721Z,1528883220.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:00.739Z,1528883220.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:01.120Z,1528883221.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:01.145Z,1528883221.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:01.503Z,1528883221.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:01.544Z,1528883221.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:04.611Z,1528883224.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:04.639Z,1528883224.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:04.755Z,1528883224.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:04.801Z,1528883224.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:05.168Z,1528883225.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:05.191Z,1528883225.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:05.573Z,1528883225.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:05.592Z,1528883225.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:05.959Z,1528883225.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:06.003Z,1528883226.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:06.347Z,1528883226.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:06.384Z,1528883226.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:06.744Z,1528883226.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:06.774Z,1528883226.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:07.147Z,1528883227.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:07.181Z,1528883227.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:07.558Z,1528883227.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:07.590Z,1528883227.590 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:07.590Z,1528883227.590 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 127
2018-06-13T09:47:07.590Z,1528883227.590 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:47:07.592Z,1528883227.592 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:07.592Z,1528883227.592 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 127
2018-06-13T09:47:07.592Z,1528883227.592 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:47:07.594Z,1528883227.594 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:07.594Z,1528883227.594 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 127
2018-06-13T09:47:07.594Z,1528883227.594 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:47:07.669Z,1528883227.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:47:07.669Z,1528883227.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:47:07.670Z,1528883227.670 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:47:07.965Z,1528883227.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:08.081Z,1528883228.081 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:47:08.081Z,1528883228.081 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 127
2018-06-13T09:47:08.081Z,1528883228.081 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:47:08.081Z,1528883228.081 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 127
2018-06-13T09:47:08.082Z,1528883228.082 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:47:08.082Z,1528883228.082 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 127
2018-06-13T09:47:08.361Z,1528883228.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:08.394Z,1528883228.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:47:08.395Z,1528883228.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:47:08.395Z,1528883228.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:47:08.395Z,1528883228.395 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:47:08.396Z,1528883228.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:47:08.396Z,1528883228.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:47:08.396Z,1528883228.396 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:47:08.397Z,1528883228.397 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:47:08.397Z,1528883228.397 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:47:08.746Z,1528883228.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:08.783Z,1528883228.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:47:08.784Z,1528883228.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:09.153Z,1528883229.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:09.175Z,1528883229.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:47:09.176Z,1528883229.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:09.554Z,1528883229.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:09.571Z,1528883229.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:47:09.572Z,1528883229.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:09.952Z,1528883229.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:09.970Z,1528883229.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:47:09.971Z,1528883229.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:10.359Z,1528883230.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:10.382Z,1528883230.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:47:10.383Z,1528883230.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:10.762Z,1528883230.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:10.784Z,1528883230.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:47:10.785Z,1528883230.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:11.162Z,1528883231.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:11.189Z,1528883231.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:47:11.190Z,1528883231.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:11.543Z,1528883231.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:11.582Z,1528883231.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:47:11.584Z,1528883231.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:11.943Z,1528883231.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:11.984Z,1528883231.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:47:11.986Z,1528883231.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:12.343Z,1528883232.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:12.375Z,1528883232.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:47:12.376Z,1528883232.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:12.743Z,1528883232.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:12.784Z,1528883232.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:47:12.786Z,1528883232.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:13.147Z,1528883233.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:13.183Z,1528883233.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:47:13.183Z,1528883233.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:13.561Z,1528883233.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:13.584Z,1528883233.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:47:13.586Z,1528883233.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:13.963Z,1528883233.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:13.985Z,1528883233.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:47:13.986Z,1528883233.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:14.367Z,1528883234.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:14.385Z,1528883234.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:47:14.386Z,1528883234.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:14.746Z,1528883234.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:14.774Z,1528883234.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:47:14.775Z,1528883234.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:15.143Z,1528883235.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:15.173Z,1528883235.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:47:15.174Z,1528883235.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:15.547Z,1528883235.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:15.580Z,1528883235.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:47:15.581Z,1528883235.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:15.946Z,1528883235.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:15.973Z,1528883235.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:47:15.974Z,1528883235.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:16.365Z,1528883236.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:16.383Z,1528883236.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:47:16.384Z,1528883236.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:16.767Z,1528883236.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:16.789Z,1528883236.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:47:16.791Z,1528883236.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:17.160Z,1528883237.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:17.186Z,1528883237.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:47:17.187Z,1528883237.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:17.547Z,1528883237.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:17.574Z,1528883237.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:47:17.575Z,1528883237.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:17.947Z,1528883237.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:17.980Z,1528883237.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:47:17.981Z,1528883237.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:18.347Z,1528883238.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:18.376Z,1528883238.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:47:18.377Z,1528883238.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:18.743Z,1528883238.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:18.785Z,1528883238.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:47:18.786Z,1528883238.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:19.151Z,1528883239.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:19.188Z,1528883239.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:47:19.193Z,1528883239.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:19.561Z,1528883239.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:19.600Z,1528883239.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:47:19.602Z,1528883239.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:19.957Z,1528883239.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:19.975Z,1528883239.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:47:19.975Z,1528883239.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:20.362Z,1528883240.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:20.382Z,1528883240.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:47:20.383Z,1528883240.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:20.752Z,1528883240.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:20.775Z,1528883240.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:47:20.776Z,1528883240.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:21.154Z,1528883241.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:21.172Z,1528883241.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:47:21.173Z,1528883241.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:21.553Z,1528883241.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:21.571Z,1528883241.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:47:21.572Z,1528883241.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:21.950Z,1528883241.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:21.971Z,1528883241.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:47:21.972Z,1528883241.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:22.363Z,1528883242.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:22.380Z,1528883242.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:47:22.381Z,1528883242.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:22.762Z,1528883242.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:22.784Z,1528883242.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:47:22.785Z,1528883242.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:23.162Z,1528883243.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:23.187Z,1528883243.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:47:23.188Z,1528883243.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:23.554Z,1528883243.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:23.571Z,1528883243.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:47:23.572Z,1528883243.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:23.957Z,1528883243.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:23.974Z,1528883243.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:47:23.975Z,1528883243.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:24.353Z,1528883244.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:24.370Z,1528883244.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:47:24.371Z,1528883244.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:24.754Z,1528883244.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:24.776Z,1528883244.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:47:24.777Z,1528883244.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:25.151Z,1528883245.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:25.173Z,1528883245.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:47:25.174Z,1528883245.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:25.563Z,1528883245.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:25.587Z,1528883245.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:47:25.588Z,1528883245.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:25.968Z,1528883245.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:25.985Z,1528883245.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:47:25.986Z,1528883245.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:26.363Z,1528883246.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:26.380Z,1528883246.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:47:26.382Z,1528883246.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:26.746Z,1528883246.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:26.774Z,1528883246.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:47:26.775Z,1528883246.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:27.147Z,1528883247.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:27.184Z,1528883247.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:47:27.189Z,1528883247.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:27.547Z,1528883247.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:27.583Z,1528883247.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T09:47:27.584Z,1528883247.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:27.947Z,1528883247.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:27.985Z,1528883247.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:28.372Z,1528883248.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:28.392Z,1528883248.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:28.767Z,1528883248.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:28.785Z,1528883248.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:29.164Z,1528883249.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:29.188Z,1528883249.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:29.547Z,1528883249.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:29.580Z,1528883249.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:29.947Z,1528883249.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:29.987Z,1528883249.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:30.347Z,1528883250.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:30.380Z,1528883250.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:30.749Z,1528883250.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:30.778Z,1528883250.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:31.147Z,1528883251.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:31.179Z,1528883251.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:31.564Z,1528883251.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:31.582Z,1528883251.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:31.967Z,1528883251.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:31.984Z,1528883251.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:32.363Z,1528883252.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:32.381Z,1528883252.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:32.747Z,1528883252.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:32.784Z,1528883252.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:33.147Z,1528883253.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:33.185Z,1528883253.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:33.551Z,1528883253.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:33.584Z,1528883253.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:33.947Z,1528883253.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:33.984Z,1528883253.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:34.369Z,1528883254.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:34.386Z,1528883254.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:34.768Z,1528883254.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:34.786Z,1528883254.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:35.157Z,1528883255.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:35.192Z,1528883255.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:35.549Z,1528883255.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:35.583Z,1528883255.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:35.947Z,1528883255.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:35.987Z,1528883255.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:36.357Z,1528883256.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:36.385Z,1528883256.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:36.761Z,1528883256.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:36.796Z,1528883256.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:37.157Z,1528883257.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:37.185Z,1528883257.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:37.548Z,1528883257.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:37.583Z,1528883257.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:37.947Z,1528883257.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:37.965Z,1528883257.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:38.361Z,1528883258.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:38.395Z,1528883258.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:38.761Z,1528883258.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:38.794Z,1528883258.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:39.165Z,1528883259.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:39.193Z,1528883259.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:39.552Z,1528883259.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:39.570Z,1528883259.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:39.952Z,1528883259.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:39.982Z,1528883259.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:40.358Z,1528883260.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:40.375Z,1528883260.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:40.761Z,1528883260.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:40.804Z,1528883260.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:41.161Z,1528883261.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:41.179Z,1528883261.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:41.551Z,1528883261.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:41.569Z,1528883261.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:41.952Z,1528883261.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:41.970Z,1528883261.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:42.359Z,1528883262.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:42.377Z,1528883262.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:42.759Z,1528883262.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:42.777Z,1528883262.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:43.159Z,1528883263.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:43.184Z,1528883263.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:43.554Z,1528883263.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:43.572Z,1528883263.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:43.950Z,1528883263.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:43.968Z,1528883263.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:44.358Z,1528883264.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:44.381Z,1528883264.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:44.761Z,1528883264.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:44.780Z,1528883264.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:45.159Z,1528883265.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:45.177Z,1528883265.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:45.548Z,1528883265.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:45.574Z,1528883265.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:45.954Z,1528883265.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:45.971Z,1528883265.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:46.363Z,1528883266.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:46.382Z,1528883266.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:46.762Z,1528883266.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:46.784Z,1528883266.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:47.164Z,1528883267.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:47.182Z,1528883267.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:47.551Z,1528883267.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:47.568Z,1528883267.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:47.951Z,1528883267.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:47.984Z,1528883267.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:48.363Z,1528883268.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:48.381Z,1528883268.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:48.767Z,1528883268.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:48.785Z,1528883268.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:49.167Z,1528883269.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:49.185Z,1528883269.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:49.554Z,1528883269.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:49.572Z,1528883269.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:49.943Z,1528883269.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:49.980Z,1528883269.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:50.366Z,1528883270.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:50.384Z,1528883270.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:50.766Z,1528883270.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:50.784Z,1528883270.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:51.166Z,1528883271.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:51.186Z,1528883271.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:51.554Z,1528883271.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:51.571Z,1528883271.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:51.954Z,1528883271.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:51.976Z,1528883271.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:52.366Z,1528883272.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:52.384Z,1528883272.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:52.766Z,1528883272.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:52.784Z,1528883272.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:53.163Z,1528883273.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:53.181Z,1528883273.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:53.554Z,1528883273.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:53.572Z,1528883273.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:53.943Z,1528883273.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:53.979Z,1528883273.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:54.363Z,1528883274.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:54.381Z,1528883274.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:54.767Z,1528883274.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:54.784Z,1528883274.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:55.163Z,1528883275.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:55.180Z,1528883275.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:55.551Z,1528883275.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:55.585Z,1528883275.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:55.947Z,1528883275.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:55.975Z,1528883275.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:56.363Z,1528883276.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:56.381Z,1528883276.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:56.767Z,1528883276.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:56.785Z,1528883276.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:57.164Z,1528883277.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:57.182Z,1528883277.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:57.547Z,1528883277.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:57.583Z,1528883277.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:57.947Z,1528883277.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:57.980Z,1528883277.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:58.364Z,1528883278.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:58.382Z,1528883278.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:58.768Z,1528883278.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:58.786Z,1528883278.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:59.163Z,1528883279.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:59.181Z,1528883279.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:59.548Z,1528883279.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:59.576Z,1528883279.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:47:59.957Z,1528883279.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:47:59.974Z,1528883279.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:00.367Z,1528883280.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:00.385Z,1528883280.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:03.477Z,1528883283.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:03.495Z,1528883283.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:03.499Z,1528883283.499 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T09:43:00.5Z
2018-06-13T09:48:03.499Z,1528883283.499 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T09:48:03.499Z,1528883283.499 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T09:48:03.647Z,1528883283.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:03.676Z,1528883283.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:04.776Z,1528883284.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:04.794Z,1528883284.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:04.897Z,1528883284.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:04.931Z,1528883284.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:05.321Z,1528883285.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:05.338Z,1528883285.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:05.723Z,1528883285.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:05.741Z,1528883285.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:06.118Z,1528883286.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:06.141Z,1528883286.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:06.535Z,1528883286.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:06.601Z,1528883286.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:06.899Z,1528883286.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:06.937Z,1528883286.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:10.011Z,1528883290.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:10.037Z,1528883290.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:10.126Z,1528883290.126 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0148.lzma
2018-06-13T09:48:10.177Z,1528883290.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:10.194Z,1528883290.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:10.572Z,1528883290.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:10.590Z,1528883290.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:10.926Z,1528883290.926 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0148.lzma.bak
2018-06-13T09:48:10.926Z,1528883290.926 [DataOverHttps](INFO): SBD MOMSN=8329005
2018-06-13T09:48:10.983Z,1528883290.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:11.002Z,1528883291.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:12.834Z,1528883292.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:12.851Z,1528883292.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:12.989Z,1528883292.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:13.008Z,1528883293.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:13.402Z,1528883293.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:13.436Z,1528883293.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:16.517Z,1528883296.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:16.544Z,1528883296.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:16.693Z,1528883296.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:16.735Z,1528883296.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:17.077Z,1528883297.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:17.095Z,1528883297.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:17.479Z,1528883297.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:17.497Z,1528883297.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:17.867Z,1528883297.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:17.886Z,1528883297.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:18.272Z,1528883298.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:18.308Z,1528883298.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:18.682Z,1528883298.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:18.717Z,1528883298.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:19.077Z,1528883299.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:19.095Z,1528883299.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:19.485Z,1528883299.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:19.523Z,1528883299.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:24.269Z,1528883304.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:24.287Z,1528883304.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:24.373Z,1528883304.373 [DataOverHttps](INFO): Sending 97 bytes from file Logs/20180613T032335/Express0149.lzma
2018-06-13T09:48:24.394Z,1528883304.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:24.436Z,1528883304.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:24.782Z,1528883304.782 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T09:48:24.782Z,1528883304.782 [NAL9602] Data Fault, FailCount= 5
2018-06-13T09:48:24.782Z,1528883304.782 [NAL9602](ERROR): Data Fault
2018-06-13T09:48:24.800Z,1528883304.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:24.846Z,1528883304.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:24.929Z,1528883304.929 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T09:48:24.929Z,1528883304.929 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T09:48:25.174Z,1528883305.174 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0149.lzma.bak
2018-06-13T09:48:25.174Z,1528883305.174 [DataOverHttps](INFO): SBD MOMSN=8329007
2018-06-13T09:48:25.183Z,1528883305.183 [NAL9602](INFO): Powering down
2018-06-13T09:48:25.201Z,1528883305.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:25.243Z,1528883305.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:25.319Z,1528883305.319 [CBIT](INFO): Critical error at 20180613T094824
2018-06-13T09:48:27.062Z,1528883307.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:27.089Z,1528883307.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:27.092Z,1528883307.092 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T09:48:27.092Z,1528883307.092 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T09:48:27.092Z,1528883307.092 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T09:48:27.203Z,1528883307.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:27.252Z,1528883307.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:30.331Z,1528883310.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:30.349Z,1528883310.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:30.463Z,1528883310.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:30.508Z,1528883310.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:30.862Z,1528883310.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:30.910Z,1528883310.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:31.255Z,1528883311.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:31.285Z,1528883311.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:31.659Z,1528883311.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:31.692Z,1528883311.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:32.055Z,1528883312.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:32.091Z,1528883312.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:32.456Z,1528883312.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:32.475Z,1528883312.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:32.855Z,1528883312.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:32.874Z,1528883312.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:33.257Z,1528883313.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:33.276Z,1528883313.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:33.655Z,1528883313.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:33.681Z,1528883313.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:34.056Z,1528883314.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:34.075Z,1528883314.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:34.457Z,1528883314.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:34.476Z,1528883314.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:34.856Z,1528883314.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:34.874Z,1528883314.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:35.255Z,1528883315.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:35.274Z,1528883315.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:35.660Z,1528883315.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:35.681Z,1528883315.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:36.055Z,1528883316.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:36.080Z,1528883316.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:36.456Z,1528883316.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:36.473Z,1528883316.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:36.860Z,1528883316.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:36.878Z,1528883316.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:37.255Z,1528883317.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:37.280Z,1528883317.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:37.656Z,1528883317.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:37.673Z,1528883317.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:38.059Z,1528883318.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:38.077Z,1528883318.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:38.455Z,1528883318.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:38.473Z,1528883318.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:38.851Z,1528883318.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:38.885Z,1528883318.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:39.254Z,1528883319.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:39.291Z,1528883319.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:39.650Z,1528883319.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:39.677Z,1528883319.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:40.050Z,1528883320.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:40.083Z,1528883320.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:40.453Z,1528883320.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:40.488Z,1528883320.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:40.850Z,1528883320.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:40.878Z,1528883320.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:41.254Z,1528883321.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:41.281Z,1528883321.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:41.653Z,1528883321.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:41.688Z,1528883321.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:42.050Z,1528883322.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:42.084Z,1528883322.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:42.454Z,1528883322.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:42.491Z,1528883322.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:42.853Z,1528883322.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:42.889Z,1528883322.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:43.254Z,1528883323.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:43.281Z,1528883323.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:43.655Z,1528883323.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:43.691Z,1528883323.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:44.054Z,1528883324.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:44.090Z,1528883324.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:44.450Z,1528883324.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:44.484Z,1528883324.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:44.854Z,1528883324.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:44.881Z,1528883324.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:45.250Z,1528883325.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:45.283Z,1528883325.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:45.650Z,1528883325.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:45.684Z,1528883325.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:46.054Z,1528883326.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:46.081Z,1528883326.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:46.454Z,1528883326.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:46.488Z,1528883326.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:46.850Z,1528883326.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:46.884Z,1528883326.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:47.254Z,1528883327.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:47.287Z,1528883327.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:47.654Z,1528883327.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:47.688Z,1528883327.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:48.050Z,1528883328.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:48.084Z,1528883328.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:48.464Z,1528883328.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:48.482Z,1528883328.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:48.854Z,1528883328.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:48.888Z,1528883328.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:49.250Z,1528883329.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:49.280Z,1528883329.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:49.654Z,1528883329.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:49.692Z,1528883329.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:50.054Z,1528883330.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:50.090Z,1528883330.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:50.451Z,1528883330.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:50.478Z,1528883330.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:50.854Z,1528883330.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:50.881Z,1528883330.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:51.254Z,1528883331.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:51.288Z,1528883331.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:51.650Z,1528883331.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:51.684Z,1528883331.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:52.054Z,1528883332.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:52.092Z,1528883332.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:52.454Z,1528883332.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:52.488Z,1528883332.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:52.850Z,1528883332.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:52.884Z,1528883332.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:53.254Z,1528883333.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:53.288Z,1528883333.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:53.653Z,1528883333.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:53.686Z,1528883333.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:54.054Z,1528883334.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:54.081Z,1528883334.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:54.454Z,1528883334.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:54.489Z,1528883334.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:54.854Z,1528883334.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:54.891Z,1528883334.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:55.251Z,1528883335.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:55.279Z,1528883335.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:55.654Z,1528883335.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:55.692Z,1528883335.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:56.054Z,1528883336.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:56.090Z,1528883336.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:56.449Z,1528883336.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:56.488Z,1528883336.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:56.862Z,1528883336.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:56.903Z,1528883336.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:57.259Z,1528883337.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:57.373Z,1528883337.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:57.656Z,1528883337.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:57.681Z,1528883337.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:58.059Z,1528883338.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:58.149Z,1528883338.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:58.457Z,1528883338.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:58.475Z,1528883338.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:58.854Z,1528883338.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:58.872Z,1528883338.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:59.257Z,1528883339.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:59.275Z,1528883339.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:48:59.657Z,1528883339.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:48:59.675Z,1528883339.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:00.057Z,1528883340.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:00.074Z,1528883340.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:00.457Z,1528883340.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:00.475Z,1528883340.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:00.858Z,1528883340.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:00.875Z,1528883340.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:01.254Z,1528883341.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:01.289Z,1528883341.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:01.654Z,1528883341.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:01.681Z,1528883341.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:02.053Z,1528883342.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:02.088Z,1528883342.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:02.450Z,1528883342.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:02.483Z,1528883342.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:02.854Z,1528883342.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:02.890Z,1528883342.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:03.254Z,1528883343.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:03.291Z,1528883343.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:03.654Z,1528883343.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:03.681Z,1528883343.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:04.054Z,1528883344.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:04.092Z,1528883344.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:04.453Z,1528883344.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:04.488Z,1528883344.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:04.851Z,1528883344.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:04.879Z,1528883344.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:05.254Z,1528883345.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:05.288Z,1528883345.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:05.654Z,1528883345.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:05.691Z,1528883345.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:06.050Z,1528883346.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:06.078Z,1528883346.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:06.453Z,1528883346.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:06.488Z,1528883346.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:06.855Z,1528883346.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:06.892Z,1528883346.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:07.251Z,1528883347.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:07.279Z,1528883347.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:07.655Z,1528883347.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:07.688Z,1528883347.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:08.055Z,1528883348.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:08.089Z,1528883348.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:08.451Z,1528883348.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:08.491Z,1528883348.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:08.855Z,1528883348.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:08.888Z,1528883348.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:09.255Z,1528883349.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:09.287Z,1528883349.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:09.659Z,1528883349.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:09.687Z,1528883349.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:10.050Z,1528883350.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:10.077Z,1528883350.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:10.454Z,1528883350.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:10.493Z,1528883350.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:10.854Z,1528883350.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:10.872Z,1528883350.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:11.250Z,1528883351.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:11.268Z,1528883351.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:11.655Z,1528883351.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:11.700Z,1528883351.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:12.058Z,1528883352.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:12.076Z,1528883352.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:12.459Z,1528883352.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:12.476Z,1528883352.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:12.857Z,1528883352.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:12.875Z,1528883352.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:13.257Z,1528883353.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:13.275Z,1528883353.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:13.657Z,1528883353.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:13.676Z,1528883353.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:14.057Z,1528883354.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:14.080Z,1528883354.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:14.458Z,1528883354.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:14.476Z,1528883354.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:14.853Z,1528883354.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:14.871Z,1528883354.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:15.257Z,1528883355.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:15.275Z,1528883355.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:15.657Z,1528883355.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:15.674Z,1528883355.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:16.053Z,1528883356.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:16.071Z,1528883356.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:16.458Z,1528883356.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:16.475Z,1528883356.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:16.857Z,1528883356.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:16.874Z,1528883356.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:17.253Z,1528883357.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:17.271Z,1528883357.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:17.657Z,1528883357.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:17.680Z,1528883357.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:18.057Z,1528883358.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:18.074Z,1528883358.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:18.453Z,1528883358.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:18.472Z,1528883358.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:18.857Z,1528883358.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:18.875Z,1528883358.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:19.257Z,1528883359.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:19.274Z,1528883359.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:19.653Z,1528883359.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:19.671Z,1528883359.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:20.057Z,1528883360.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:20.075Z,1528883360.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:20.457Z,1528883360.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:20.474Z,1528883360.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:20.857Z,1528883360.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:20.875Z,1528883360.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:21.258Z,1528883361.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:21.276Z,1528883361.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:21.653Z,1528883361.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:21.676Z,1528883361.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:22.053Z,1528883362.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:22.071Z,1528883362.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:22.457Z,1528883362.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:22.475Z,1528883362.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:22.857Z,1528883362.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:22.874Z,1528883362.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:23.255Z,1528883363.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:23.274Z,1528883363.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:23.657Z,1528883363.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:23.675Z,1528883363.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:24.057Z,1528883364.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:24.074Z,1528883364.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:24.457Z,1528883364.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:24.475Z,1528883364.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:24.857Z,1528883364.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:24.875Z,1528883364.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:25.257Z,1528883365.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:25.275Z,1528883365.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:25.657Z,1528883365.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:25.675Z,1528883365.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:26.062Z,1528883366.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:26.079Z,1528883366.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:26.455Z,1528883366.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:26.480Z,1528883366.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:26.857Z,1528883366.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:26.875Z,1528883366.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:27.261Z,1528883367.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:27.278Z,1528883367.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:27.661Z,1528883367.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:27.678Z,1528883367.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:30.779Z,1528883370.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:30.804Z,1528883370.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:30.926Z,1528883370.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:30.964Z,1528883370.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:31.326Z,1528883371.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:31.364Z,1528883371.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:31.727Z,1528883371.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:31.759Z,1528883371.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:32.121Z,1528883372.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:32.158Z,1528883372.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:32.522Z,1528883372.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:32.559Z,1528883372.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:32.921Z,1528883372.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:32.958Z,1528883372.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:33.323Z,1528883373.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:33.340Z,1528883373.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:33.718Z,1528883373.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:33.736Z,1528883373.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:34.119Z,1528883374.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:34.137Z,1528883374.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:34.522Z,1528883374.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:34.540Z,1528883374.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:34.922Z,1528883374.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:34.940Z,1528883374.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:35.320Z,1528883375.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:35.338Z,1528883375.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:35.724Z,1528883375.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:35.756Z,1528883375.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:36.126Z,1528883376.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:36.143Z,1528883376.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:36.521Z,1528883376.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:36.539Z,1528883376.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:36.926Z,1528883376.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:36.943Z,1528883376.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:37.325Z,1528883377.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:37.342Z,1528883377.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:37.725Z,1528883377.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:37.743Z,1528883377.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:38.125Z,1528883378.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:38.144Z,1528883378.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:38.525Z,1528883378.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:38.542Z,1528883378.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:38.925Z,1528883378.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:38.943Z,1528883378.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:39.325Z,1528883379.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:39.343Z,1528883379.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:39.725Z,1528883379.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:39.742Z,1528883379.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:40.123Z,1528883380.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:40.141Z,1528883380.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:40.525Z,1528883380.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:40.543Z,1528883380.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:40.926Z,1528883380.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:40.943Z,1528883380.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:41.323Z,1528883381.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:41.341Z,1528883381.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:41.726Z,1528883381.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:41.756Z,1528883381.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:42.127Z,1528883382.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:42.144Z,1528883382.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:42.523Z,1528883382.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:42.541Z,1528883382.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:42.928Z,1528883382.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:42.947Z,1528883382.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:43.327Z,1528883383.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:43.345Z,1528883383.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:43.727Z,1528883383.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:43.745Z,1528883383.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:44.128Z,1528883384.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:44.146Z,1528883384.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:44.527Z,1528883384.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:44.544Z,1528883384.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:44.924Z,1528883384.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:44.942Z,1528883384.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:45.328Z,1528883385.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:45.346Z,1528883385.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:45.725Z,1528883385.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:45.742Z,1528883385.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:46.123Z,1528883386.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:46.141Z,1528883386.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:46.520Z,1528883386.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:46.554Z,1528883386.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:46.926Z,1528883386.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:46.944Z,1528883386.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:47.323Z,1528883387.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:47.341Z,1528883387.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:47.728Z,1528883387.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:47.752Z,1528883387.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:48.126Z,1528883388.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:48.144Z,1528883388.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:48.525Z,1528883388.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:48.543Z,1528883388.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:48.929Z,1528883388.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:48.946Z,1528883388.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:49.327Z,1528883389.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:49.344Z,1528883389.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:49.724Z,1528883389.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:49.742Z,1528883389.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:50.128Z,1528883390.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:50.146Z,1528883390.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:50.529Z,1528883390.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:50.546Z,1528883390.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:50.924Z,1528883390.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:50.942Z,1528883390.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:51.327Z,1528883391.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:51.349Z,1528883391.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:51.727Z,1528883391.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:51.744Z,1528883391.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:52.129Z,1528883392.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:52.147Z,1528883392.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:52.530Z,1528883392.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:52.548Z,1528883392.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:52.928Z,1528883392.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:52.945Z,1528883392.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:53.327Z,1528883393.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:53.344Z,1528883393.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:53.728Z,1528883393.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:53.758Z,1528883393.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:54.129Z,1528883394.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:54.146Z,1528883394.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:54.525Z,1528883394.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:54.544Z,1528883394.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:54.926Z,1528883394.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:54.945Z,1528883394.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:55.332Z,1528883395.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:55.350Z,1528883395.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:55.727Z,1528883395.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:55.745Z,1528883395.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:56.118Z,1528883396.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:56.161Z,1528883396.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:56.523Z,1528883396.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:56.560Z,1528883396.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:56.925Z,1528883396.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:56.952Z,1528883396.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:57.320Z,1528883397.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:57.356Z,1528883397.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:57.723Z,1528883397.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:57.756Z,1528883397.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:58.119Z,1528883398.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:58.144Z,1528883398.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:58.523Z,1528883398.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:58.561Z,1528883398.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:58.923Z,1528883398.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:58.957Z,1528883398.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:59.318Z,1528883399.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:59.337Z,1528883399.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:49:59.722Z,1528883399.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:49:59.740Z,1528883399.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:00.118Z,1528883400.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:00.137Z,1528883400.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:00.518Z,1528883400.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:00.536Z,1528883400.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:00.922Z,1528883400.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:00.939Z,1528883400.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:01.322Z,1528883401.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:01.340Z,1528883401.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:01.721Z,1528883401.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:01.739Z,1528883401.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:02.123Z,1528883402.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:02.140Z,1528883402.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:02.526Z,1528883402.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:02.544Z,1528883402.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:02.925Z,1528883402.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:02.943Z,1528883402.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:03.326Z,1528883403.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:03.348Z,1528883403.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:03.726Z,1528883403.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:03.744Z,1528883403.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:04.122Z,1528883404.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:04.139Z,1528883404.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:04.525Z,1528883404.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:04.542Z,1528883404.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:04.926Z,1528883404.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:04.944Z,1528883404.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:05.321Z,1528883405.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:05.339Z,1528883405.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:05.725Z,1528883405.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:05.742Z,1528883405.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:06.125Z,1528883406.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:06.144Z,1528883406.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:06.523Z,1528883406.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:06.541Z,1528883406.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:06.925Z,1528883406.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:06.942Z,1528883406.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:07.325Z,1528883407.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:07.343Z,1528883407.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:07.723Z,1528883407.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:07.741Z,1528883407.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:08.120Z,1528883408.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:08.151Z,1528883408.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:08.525Z,1528883408.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:08.543Z,1528883408.543 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:08.543Z,1528883408.543 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 128
2018-06-13T09:50:08.543Z,1528883408.543 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:50:08.545Z,1528883408.545 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:08.546Z,1528883408.546 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 128
2018-06-13T09:50:08.546Z,1528883408.546 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:50:08.547Z,1528883408.547 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:08.547Z,1528883408.547 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 128
2018-06-13T09:50:08.547Z,1528883408.547 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:50:08.644Z,1528883408.644 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:50:08.645Z,1528883408.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:50:08.646Z,1528883408.646 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:50:08.924Z,1528883408.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:09.017Z,1528883409.017 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:50:09.017Z,1528883409.017 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 128
2018-06-13T09:50:09.018Z,1528883409.018 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:50:09.018Z,1528883409.018 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 128
2018-06-13T09:50:09.018Z,1528883409.018 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:50:09.018Z,1528883409.018 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 128
2018-06-13T09:50:09.323Z,1528883409.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:09.347Z,1528883409.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:50:09.347Z,1528883409.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:50:09.347Z,1528883409.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:50:09.348Z,1528883409.348 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:50:09.348Z,1528883409.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:50:09.348Z,1528883409.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:50:09.349Z,1528883409.349 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:50:09.349Z,1528883409.349 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:50:09.350Z,1528883409.350 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:50:09.727Z,1528883409.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:09.758Z,1528883409.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:50:09.759Z,1528883409.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:10.123Z,1528883410.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:10.141Z,1528883410.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:50:10.142Z,1528883410.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:10.528Z,1528883410.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:10.545Z,1528883410.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:50:10.546Z,1528883410.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:10.928Z,1528883410.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:10.947Z,1528883410.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:50:10.948Z,1528883410.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:11.323Z,1528883411.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:11.341Z,1528883411.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:50:11.342Z,1528883411.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:11.728Z,1528883411.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:11.744Z,1528883411.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:50:11.745Z,1528883411.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:12.128Z,1528883412.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:12.146Z,1528883412.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:50:12.147Z,1528883412.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:12.523Z,1528883412.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:12.541Z,1528883412.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:50:12.542Z,1528883412.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:12.925Z,1528883412.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:12.947Z,1528883412.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:50:12.948Z,1528883412.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:13.328Z,1528883413.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:13.346Z,1528883413.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:50:13.346Z,1528883413.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:13.725Z,1528883413.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:13.742Z,1528883413.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:50:13.743Z,1528883413.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:14.126Z,1528883414.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:14.143Z,1528883414.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:50:14.144Z,1528883414.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:14.521Z,1528883414.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:14.554Z,1528883414.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:50:14.555Z,1528883414.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:14.928Z,1528883414.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:14.945Z,1528883414.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:50:14.946Z,1528883414.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:15.328Z,1528883415.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:15.345Z,1528883415.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:50:15.346Z,1528883415.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:15.729Z,1528883415.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:15.746Z,1528883415.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:50:15.747Z,1528883415.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:16.124Z,1528883416.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:16.142Z,1528883416.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:50:16.143Z,1528883416.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:16.518Z,1528883416.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:16.552Z,1528883416.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:50:16.553Z,1528883416.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:16.926Z,1528883416.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:16.950Z,1528883416.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:50:16.951Z,1528883416.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:17.318Z,1528883417.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:17.348Z,1528883417.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:50:17.353Z,1528883417.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:17.721Z,1528883417.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:17.747Z,1528883417.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:50:17.748Z,1528883417.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:18.122Z,1528883418.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:18.166Z,1528883418.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:50:18.167Z,1528883418.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:18.519Z,1528883418.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:18.553Z,1528883418.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:50:18.554Z,1528883418.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:18.918Z,1528883418.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:18.956Z,1528883418.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:50:18.957Z,1528883418.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:19.323Z,1528883419.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:19.350Z,1528883419.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:50:19.350Z,1528883419.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:19.721Z,1528883419.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:19.747Z,1528883419.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:50:19.748Z,1528883419.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:20.121Z,1528883420.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:20.147Z,1528883420.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:50:20.148Z,1528883420.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:20.523Z,1528883420.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:20.551Z,1528883420.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:50:20.552Z,1528883420.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:20.918Z,1528883420.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:20.948Z,1528883420.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:50:20.953Z,1528883420.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:21.318Z,1528883421.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:21.356Z,1528883421.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:50:21.357Z,1528883421.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:21.723Z,1528883421.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:21.755Z,1528883421.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:50:21.756Z,1528883421.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:22.121Z,1528883422.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:22.154Z,1528883422.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:50:22.155Z,1528883422.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:22.522Z,1528883422.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:22.555Z,1528883422.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:50:22.556Z,1528883422.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:22.922Z,1528883422.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:22.960Z,1528883422.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:50:22.961Z,1528883422.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:23.321Z,1528883423.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:23.355Z,1528883423.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:50:23.356Z,1528883423.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:23.721Z,1528883423.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:23.754Z,1528883423.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:50:23.754Z,1528883423.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:24.123Z,1528883424.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:24.160Z,1528883424.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:50:24.161Z,1528883424.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:24.518Z,1528883424.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:24.544Z,1528883424.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:50:24.549Z,1528883424.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:24.921Z,1528883424.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:24.961Z,1528883424.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:50:24.962Z,1528883424.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:25.042Z,1528883425.042 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T09:50:25.042Z,1528883425.042 [NAL9602] No Fault, FailCount= 5
2018-06-13T09:50:25.302Z,1528883425.302 [NAL9602](INFO): Powering up NAL9602
2018-06-13T09:50:25.320Z,1528883425.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:25.350Z,1528883425.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:50:25.351Z,1528883425.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:25.722Z,1528883425.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:25.740Z,1528883425.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:50:25.757Z,1528883425.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:26.122Z,1528883426.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:26.139Z,1528883426.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:50:26.140Z,1528883426.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:26.523Z,1528883426.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:26.540Z,1528883426.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:50:26.541Z,1528883426.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:26.923Z,1528883426.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:26.940Z,1528883426.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:50:26.941Z,1528883426.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:27.327Z,1528883427.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:27.373Z,1528883427.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:50:27.374Z,1528883427.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:27.723Z,1528883427.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:27.740Z,1528883427.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:50:27.741Z,1528883427.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:30.843Z,1528883430.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:30.872Z,1528883430.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:30.990Z,1528883430.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:31.021Z,1528883431.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:31.391Z,1528883431.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:31.424Z,1528883431.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:31.791Z,1528883431.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:31.823Z,1528883431.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:32.186Z,1528883432.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:32.224Z,1528883432.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:32.586Z,1528883432.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:32.629Z,1528883432.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:32.986Z,1528883432.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:33.021Z,1528883433.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:33.383Z,1528883433.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:33.404Z,1528883433.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:33.786Z,1528883433.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:33.805Z,1528883433.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:34.186Z,1528883434.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:34.205Z,1528883434.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:34.586Z,1528883434.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:34.604Z,1528883434.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:34.987Z,1528883434.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:35.005Z,1528883435.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:35.387Z,1528883435.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:35.406Z,1528883435.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:35.801Z,1528883435.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:35.835Z,1528883435.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:36.174Z,1528883436.174 [NAL9602](INFO): NAL9602 initialized
2018-06-13T09:50:36.191Z,1528883436.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:36.238Z,1528883436.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:36.590Z,1528883436.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:36.608Z,1528883436.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:37.005Z,1528883437.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:37.039Z,1528883437.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:37.401Z,1528883437.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:37.440Z,1528883437.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:37.802Z,1528883437.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:37.828Z,1528883437.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:38.193Z,1528883438.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:38.211Z,1528883438.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:38.587Z,1528883438.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:38.622Z,1528883438.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:38.999Z,1528883438.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:39.017Z,1528883439.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:39.402Z,1528883439.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:39.424Z,1528883439.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:39.799Z,1528883439.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:39.817Z,1528883439.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:40.190Z,1528883440.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:40.210Z,1528883440.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:40.594Z,1528883440.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:40.612Z,1528883440.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:40.999Z,1528883440.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:41.018Z,1528883441.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:41.403Z,1528883441.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:41.428Z,1528883441.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:41.803Z,1528883441.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:41.828Z,1528883441.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:42.187Z,1528883442.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:42.215Z,1528883442.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:42.598Z,1528883442.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:42.615Z,1528883442.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:43.004Z,1528883443.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:43.029Z,1528883443.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:43.403Z,1528883443.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:43.429Z,1528883443.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:43.803Z,1528883443.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:43.821Z,1528883443.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:44.191Z,1528883444.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:44.218Z,1528883444.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:44.587Z,1528883444.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:44.626Z,1528883444.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:45.003Z,1528883445.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:45.021Z,1528883445.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:45.403Z,1528883445.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:45.420Z,1528883445.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:45.800Z,1528883445.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:45.818Z,1528883445.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:46.193Z,1528883446.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:46.212Z,1528883446.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:46.591Z,1528883446.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:46.624Z,1528883446.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:47.004Z,1528883447.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:47.022Z,1528883447.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:47.402Z,1528883447.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:47.421Z,1528883447.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:47.803Z,1528883447.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:47.821Z,1528883447.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:48.188Z,1528883448.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:48.249Z,1528883448.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:48.587Z,1528883448.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:48.615Z,1528883448.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:49.009Z,1528883449.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:49.027Z,1528883449.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:49.403Z,1528883449.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:49.420Z,1528883449.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:49.801Z,1528883449.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:49.826Z,1528883449.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:50.187Z,1528883450.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:50.224Z,1528883450.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:50.583Z,1528883450.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:50.621Z,1528883450.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:51.004Z,1528883451.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:51.022Z,1528883451.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:51.409Z,1528883451.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:51.426Z,1528883451.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:51.798Z,1528883451.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:51.824Z,1528883451.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:52.187Z,1528883452.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:52.216Z,1528883452.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:52.587Z,1528883452.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:52.615Z,1528883452.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:53.005Z,1528883453.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:53.023Z,1528883453.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:53.408Z,1528883453.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:53.426Z,1528883453.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:53.810Z,1528883453.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:53.827Z,1528883453.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:54.183Z,1528883454.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:54.224Z,1528883454.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:54.584Z,1528883454.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:54.621Z,1528883454.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:55.008Z,1528883455.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:55.026Z,1528883455.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:55.408Z,1528883455.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:55.426Z,1528883455.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:55.798Z,1528883455.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:55.832Z,1528883455.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:56.188Z,1528883456.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:56.224Z,1528883456.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:56.588Z,1528883456.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:56.622Z,1528883456.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:56.998Z,1528883456.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:57.025Z,1528883457.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:57.401Z,1528883457.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:57.429Z,1528883457.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:57.798Z,1528883457.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:57.826Z,1528883457.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:58.192Z,1528883458.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:58.227Z,1528883458.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:58.587Z,1528883458.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:58.635Z,1528883458.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:58.998Z,1528883458.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:59.041Z,1528883459.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:59.402Z,1528883459.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:59.429Z,1528883459.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:50:59.802Z,1528883459.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:50:59.829Z,1528883459.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:00.188Z,1528883460.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:00.206Z,1528883460.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:00.591Z,1528883460.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:00.609Z,1528883460.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:01.002Z,1528883461.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:01.038Z,1528883461.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:01.402Z,1528883461.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:01.436Z,1528883461.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:01.802Z,1528883461.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:01.820Z,1528883461.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:02.194Z,1528883462.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:02.212Z,1528883462.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:02.587Z,1528883462.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:02.616Z,1528883462.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:02.998Z,1528883462.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:03.016Z,1528883463.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:03.403Z,1528883463.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:03.420Z,1528883463.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:03.798Z,1528883463.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:03.816Z,1528883463.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:04.193Z,1528883464.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:04.218Z,1528883464.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:04.593Z,1528883464.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:04.616Z,1528883464.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:04.994Z,1528883464.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:05.020Z,1528883465.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:05.402Z,1528883465.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:05.420Z,1528883465.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:05.802Z,1528883465.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:05.824Z,1528883465.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:06.193Z,1528883466.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:06.212Z,1528883466.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:06.586Z,1528883466.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:06.620Z,1528883466.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:07.002Z,1528883467.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:07.020Z,1528883467.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:07.398Z,1528883467.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:07.416Z,1528883467.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:07.798Z,1528883467.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:07.816Z,1528883467.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:08.195Z,1528883468.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:08.214Z,1528883468.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:08.587Z,1528883468.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:08.612Z,1528883468.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:08.998Z,1528883468.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:09.016Z,1528883469.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:09.402Z,1528883469.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:09.420Z,1528883469.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:09.798Z,1528883469.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:09.816Z,1528883469.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:10.186Z,1528883470.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:10.227Z,1528883470.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:10.594Z,1528883470.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:10.616Z,1528883470.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:10.991Z,1528883470.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:11.016Z,1528883471.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:11.403Z,1528883471.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:11.437Z,1528883471.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:11.808Z,1528883471.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:11.826Z,1528883471.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:12.200Z,1528883472.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:12.218Z,1528883472.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:12.587Z,1528883472.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:12.620Z,1528883472.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:12.988Z,1528883472.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:13.018Z,1528883473.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:13.388Z,1528883473.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:13.419Z,1528883473.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:13.783Z,1528883473.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:13.819Z,1528883473.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:14.208Z,1528883474.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:14.232Z,1528883474.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:14.602Z,1528883474.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:14.635Z,1528883474.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:15.005Z,1528883475.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:15.023Z,1528883475.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:15.387Z,1528883475.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:15.426Z,1528883475.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:15.784Z,1528883475.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:15.818Z,1528883475.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:16.183Z,1528883476.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:16.210Z,1528883476.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:16.588Z,1528883476.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:16.615Z,1528883476.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:16.984Z,1528883476.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:17.005Z,1528883477.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:17.399Z,1528883477.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:17.429Z,1528883477.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:17.806Z,1528883477.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:17.840Z,1528883477.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:18.207Z,1528883478.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:18.240Z,1528883478.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:18.590Z,1528883478.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:18.609Z,1528883478.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:18.990Z,1528883478.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:19.016Z,1528883479.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:19.390Z,1528883479.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:19.410Z,1528883479.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:19.790Z,1528883479.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:19.809Z,1528883479.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:20.202Z,1528883480.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:20.237Z,1528883480.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:20.610Z,1528883480.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:20.648Z,1528883480.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:20.994Z,1528883480.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:21.013Z,1528883481.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:21.394Z,1528883481.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:21.412Z,1528883481.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:21.793Z,1528883481.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:21.813Z,1528883481.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:22.189Z,1528883482.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:22.234Z,1528883482.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:22.588Z,1528883482.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:22.626Z,1528883482.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:22.987Z,1528883482.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:23.024Z,1528883483.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:23.401Z,1528883483.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:23.422Z,1528883483.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:23.810Z,1528883483.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:23.828Z,1528883483.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:24.198Z,1528883484.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:24.228Z,1528883484.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:24.584Z,1528883484.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:24.610Z,1528883484.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:24.987Z,1528883484.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:25.014Z,1528883485.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:25.388Z,1528883485.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:25.418Z,1528883485.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:25.783Z,1528883485.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:25.801Z,1528883485.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:26.202Z,1528883486.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:26.227Z,1528883486.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:26.607Z,1528883486.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:26.635Z,1528883486.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:26.998Z,1528883486.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:27.024Z,1528883487.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:27.391Z,1528883487.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:27.410Z,1528883487.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:27.792Z,1528883487.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:27.830Z,1528883487.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:28.190Z,1528883488.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:28.215Z,1528883488.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:28.593Z,1528883488.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:28.617Z,1528883488.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:28.992Z,1528883488.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:29.010Z,1528883489.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:32.113Z,1528883492.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:32.149Z,1528883492.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:32.279Z,1528883492.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:32.316Z,1528883492.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:32.665Z,1528883492.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:32.691Z,1528883492.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:33.059Z,1528883493.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:33.076Z,1528883493.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:33.455Z,1528883493.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:33.473Z,1528883493.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:33.854Z,1528883493.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:33.872Z,1528883493.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:34.261Z,1528883494.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:34.279Z,1528883494.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:34.670Z,1528883494.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:34.704Z,1528883494.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:35.062Z,1528883495.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:35.079Z,1528883495.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:35.455Z,1528883495.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:35.472Z,1528883495.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:35.856Z,1528883495.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:35.874Z,1528883495.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:36.256Z,1528883496.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:36.278Z,1528883496.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:36.658Z,1528883496.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:36.676Z,1528883496.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:37.065Z,1528883497.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:37.083Z,1528883497.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:37.465Z,1528883497.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:37.483Z,1528883497.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:37.863Z,1528883497.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:37.881Z,1528883497.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:38.258Z,1528883498.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:38.276Z,1528883498.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:38.655Z,1528883498.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:38.687Z,1528883498.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:39.063Z,1528883499.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:39.081Z,1528883499.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:39.466Z,1528883499.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:39.484Z,1528883499.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:39.862Z,1528883499.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:39.880Z,1528883499.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:40.255Z,1528883500.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:40.273Z,1528883500.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:40.657Z,1528883500.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:40.675Z,1528883500.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:41.062Z,1528883501.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:41.088Z,1528883501.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:41.463Z,1528883501.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:41.482Z,1528883501.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:41.862Z,1528883501.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:41.884Z,1528883501.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:42.256Z,1528883502.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:42.287Z,1528883502.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:42.654Z,1528883502.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:42.672Z,1528883502.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:43.066Z,1528883503.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:43.088Z,1528883503.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:43.466Z,1528883503.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:43.488Z,1528883503.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:43.867Z,1528883503.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:43.885Z,1528883503.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:44.258Z,1528883504.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:44.276Z,1528883504.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:44.655Z,1528883504.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:44.688Z,1528883504.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:45.067Z,1528883505.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:45.085Z,1528883505.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:45.466Z,1528883505.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:45.488Z,1528883505.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:45.867Z,1528883505.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:45.885Z,1528883505.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:46.259Z,1528883506.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:46.277Z,1528883506.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:46.655Z,1528883506.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:46.678Z,1528883506.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:47.067Z,1528883507.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:47.085Z,1528883507.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:47.467Z,1528883507.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:47.485Z,1528883507.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:47.867Z,1528883507.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:47.885Z,1528883507.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:48.250Z,1528883508.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:48.284Z,1528883508.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:48.654Z,1528883508.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:48.676Z,1528883508.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:49.068Z,1528883509.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:49.085Z,1528883509.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:49.465Z,1528883509.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:49.484Z,1528883509.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:49.868Z,1528883509.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:49.892Z,1528883509.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:50.259Z,1528883510.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:50.277Z,1528883510.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:50.655Z,1528883510.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:50.679Z,1528883510.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:51.068Z,1528883511.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:51.086Z,1528883511.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:51.466Z,1528883511.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:51.488Z,1528883511.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:51.866Z,1528883511.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:51.884Z,1528883511.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:52.258Z,1528883512.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:52.275Z,1528883512.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:52.655Z,1528883512.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:52.678Z,1528883512.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:53.066Z,1528883513.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:53.085Z,1528883513.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:53.467Z,1528883513.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:53.485Z,1528883513.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:53.866Z,1528883513.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:53.884Z,1528883513.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:54.255Z,1528883514.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:54.279Z,1528883514.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:54.654Z,1528883514.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:54.676Z,1528883514.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:55.067Z,1528883515.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:55.084Z,1528883515.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:55.466Z,1528883515.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:55.488Z,1528883515.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:55.867Z,1528883515.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:55.884Z,1528883515.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:56.255Z,1528883516.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:56.278Z,1528883516.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:56.655Z,1528883516.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:56.680Z,1528883516.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:57.055Z,1528883517.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:57.073Z,1528883517.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:57.466Z,1528883517.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:57.484Z,1528883517.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:57.865Z,1528883517.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:57.884Z,1528883517.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:58.268Z,1528883518.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:58.286Z,1528883518.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:58.659Z,1528883518.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:58.676Z,1528883518.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:59.055Z,1528883519.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:59.079Z,1528883519.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:59.455Z,1528883519.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:59.473Z,1528883519.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:51:59.855Z,1528883519.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:51:59.878Z,1528883519.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:00.269Z,1528883520.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:00.287Z,1528883520.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:00.668Z,1528883520.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:00.686Z,1528883520.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:01.066Z,1528883521.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:01.084Z,1528883521.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:01.455Z,1528883521.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:01.480Z,1528883521.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:01.856Z,1528883521.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:01.874Z,1528883521.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:02.256Z,1528883522.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:02.279Z,1528883522.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:02.659Z,1528883522.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:02.684Z,1528883522.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:03.054Z,1528883523.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:03.072Z,1528883523.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:03.470Z,1528883523.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:03.488Z,1528883523.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:03.867Z,1528883523.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:03.885Z,1528883523.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:04.267Z,1528883524.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:04.292Z,1528883524.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:04.658Z,1528883524.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:04.676Z,1528883524.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:05.055Z,1528883525.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:05.081Z,1528883525.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:05.448Z,1528883525.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:05.488Z,1528883525.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:05.851Z,1528883525.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:05.888Z,1528883525.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:06.268Z,1528883526.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:06.286Z,1528883526.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:06.669Z,1528883526.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:06.687Z,1528883526.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:07.068Z,1528883527.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:07.092Z,1528883527.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:07.451Z,1528883527.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:07.494Z,1528883527.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:07.848Z,1528883527.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:07.874Z,1528883527.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:08.256Z,1528883528.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:08.288Z,1528883528.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:08.652Z,1528883528.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:08.686Z,1528883528.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:09.051Z,1528883529.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:09.085Z,1528883529.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:09.462Z,1528883529.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:09.497Z,1528883529.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:09.866Z,1528883529.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:09.894Z,1528883529.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:10.265Z,1528883530.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:10.300Z,1528883530.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:10.672Z,1528883530.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:10.740Z,1528883530.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:11.051Z,1528883531.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:11.069Z,1528883531.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:11.452Z,1528883531.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:11.470Z,1528883531.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:11.854Z,1528883531.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:11.872Z,1528883531.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:12.266Z,1528883532.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:12.304Z,1528883532.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:12.665Z,1528883532.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:12.683Z,1528883532.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:13.065Z,1528883533.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:13.083Z,1528883533.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:13.456Z,1528883533.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:13.474Z,1528883533.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:13.854Z,1528883533.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:13.872Z,1528883533.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:14.256Z,1528883534.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:14.274Z,1528883534.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:14.656Z,1528883534.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:14.694Z,1528883534.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:15.055Z,1528883535.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:15.073Z,1528883535.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:15.465Z,1528883535.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:15.483Z,1528883535.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:15.865Z,1528883535.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:15.883Z,1528883535.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:16.265Z,1528883536.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:16.283Z,1528883536.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:16.655Z,1528883536.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:16.687Z,1528883536.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:17.056Z,1528883537.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:17.088Z,1528883537.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:17.455Z,1528883537.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:17.472Z,1528883537.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:17.855Z,1528883537.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:17.887Z,1528883537.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:18.262Z,1528883538.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:18.284Z,1528883538.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:18.665Z,1528883538.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:18.683Z,1528883538.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:19.062Z,1528883539.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:19.081Z,1528883539.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:19.455Z,1528883539.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:19.486Z,1528883539.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:19.858Z,1528883539.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:19.876Z,1528883539.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:20.257Z,1528883540.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:20.275Z,1528883540.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:20.658Z,1528883540.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:20.676Z,1528883540.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:21.054Z,1528883541.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:21.072Z,1528883541.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:21.462Z,1528883541.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:21.480Z,1528883541.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:21.865Z,1528883541.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:21.883Z,1528883541.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:22.265Z,1528883542.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:22.288Z,1528883542.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:22.658Z,1528883542.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:22.675Z,1528883542.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:23.055Z,1528883543.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:23.087Z,1528883543.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:23.455Z,1528883543.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:23.472Z,1528883543.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:23.855Z,1528883543.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:23.887Z,1528883543.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:24.262Z,1528883544.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:24.288Z,1528883544.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:24.663Z,1528883544.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:24.681Z,1528883544.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:25.065Z,1528883545.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:25.083Z,1528883545.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:25.455Z,1528883545.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:25.487Z,1528883545.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:25.854Z,1528883545.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:25.872Z,1528883545.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:26.257Z,1528883546.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:26.275Z,1528883546.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:26.656Z,1528883546.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:26.683Z,1528883546.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:27.054Z,1528883547.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:27.072Z,1528883547.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:27.469Z,1528883547.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:27.487Z,1528883547.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:27.869Z,1528883547.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:27.887Z,1528883547.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:30.977Z,1528883550.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:31.015Z,1528883551.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:31.135Z,1528883551.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:31.172Z,1528883551.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:31.535Z,1528883551.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:31.574Z,1528883551.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:31.936Z,1528883551.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:31.970Z,1528883551.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:32.341Z,1528883552.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:32.375Z,1528883552.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:32.745Z,1528883552.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:32.772Z,1528883552.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:33.145Z,1528883553.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:33.173Z,1528883553.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:33.531Z,1528883553.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:33.548Z,1528883553.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:33.931Z,1528883553.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:33.962Z,1528883553.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:34.334Z,1528883554.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:34.352Z,1528883554.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:34.740Z,1528883554.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:34.758Z,1528883554.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:35.142Z,1528883555.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:35.164Z,1528883555.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:35.542Z,1528883555.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:35.559Z,1528883555.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:35.940Z,1528883555.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:35.966Z,1528883555.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:36.337Z,1528883556.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:36.355Z,1528883556.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:36.734Z,1528883556.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:36.753Z,1528883556.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:37.146Z,1528883557.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:37.168Z,1528883557.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:37.546Z,1528883557.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:37.564Z,1528883557.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:37.947Z,1528883557.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:37.964Z,1528883557.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:38.335Z,1528883558.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:38.358Z,1528883558.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:38.735Z,1528883558.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:38.760Z,1528883558.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:39.146Z,1528883559.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:39.164Z,1528883559.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:39.545Z,1528883559.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:39.564Z,1528883559.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:39.946Z,1528883559.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:39.964Z,1528883559.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:40.334Z,1528883560.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:40.352Z,1528883560.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:40.731Z,1528883560.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:40.757Z,1528883560.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:41.147Z,1528883561.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:41.165Z,1528883561.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:41.548Z,1528883561.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:41.566Z,1528883561.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:41.947Z,1528883561.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:41.965Z,1528883561.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:42.335Z,1528883562.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:42.359Z,1528883562.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:42.728Z,1528883562.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:42.760Z,1528883562.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:43.136Z,1528883563.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:43.160Z,1528883563.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:43.548Z,1528883563.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:43.566Z,1528883563.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:43.948Z,1528883563.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:43.966Z,1528883563.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:44.342Z,1528883564.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:44.364Z,1528883564.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:44.735Z,1528883564.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:44.759Z,1528883564.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:45.127Z,1528883565.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:45.157Z,1528883565.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:45.532Z,1528883565.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:45.561Z,1528883565.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:45.927Z,1528883565.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:45.964Z,1528883565.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:46.349Z,1528883566.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:46.367Z,1528883566.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:46.752Z,1528883566.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:46.770Z,1528883566.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:47.148Z,1528883567.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:47.166Z,1528883567.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:47.531Z,1528883567.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:47.567Z,1528883567.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:47.928Z,1528883567.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:47.964Z,1528883567.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:48.332Z,1528883568.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:48.361Z,1528883568.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:48.728Z,1528883568.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:48.764Z,1528883568.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:49.131Z,1528883569.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:49.165Z,1528883569.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:49.548Z,1528883569.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:49.566Z,1528883569.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:49.948Z,1528883569.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:49.966Z,1528883569.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:50.349Z,1528883570.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:50.372Z,1528883570.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:50.730Z,1528883570.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:50.759Z,1528883570.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:51.131Z,1528883571.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:51.165Z,1528883571.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:51.531Z,1528883571.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:51.569Z,1528883571.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:51.930Z,1528883571.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:51.963Z,1528883571.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:52.352Z,1528883572.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:52.371Z,1528883572.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:52.750Z,1528883572.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:52.768Z,1528883572.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:53.149Z,1528883573.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:53.167Z,1528883573.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:53.527Z,1528883573.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:53.554Z,1528883573.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:53.931Z,1528883573.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:53.961Z,1528883573.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:54.331Z,1528883574.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:54.348Z,1528883574.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:54.728Z,1528883574.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:54.746Z,1528883574.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:55.127Z,1528883575.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:55.146Z,1528883575.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:55.537Z,1528883575.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:55.579Z,1528883575.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:55.941Z,1528883575.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:55.971Z,1528883575.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:56.346Z,1528883576.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:56.379Z,1528883576.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:56.735Z,1528883576.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:56.756Z,1528883576.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:57.135Z,1528883577.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:57.154Z,1528883577.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:57.533Z,1528883577.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:57.552Z,1528883577.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:57.934Z,1528883577.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:57.952Z,1528883577.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:58.341Z,1528883578.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:58.360Z,1528883578.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:58.745Z,1528883578.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:58.789Z,1528883578.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:59.141Z,1528883579.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:59.164Z,1528883579.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:59.534Z,1528883579.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:59.552Z,1528883579.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:52:59.936Z,1528883579.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:52:59.956Z,1528883579.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:00.335Z,1528883580.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:00.353Z,1528883580.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:00.734Z,1528883580.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:00.752Z,1528883580.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:01.136Z,1528883581.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:01.153Z,1528883581.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:01.541Z,1528883581.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:01.559Z,1528883581.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:01.941Z,1528883581.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:01.960Z,1528883581.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:02.338Z,1528883582.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:02.356Z,1528883582.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:02.738Z,1528883582.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:02.755Z,1528883582.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:03.136Z,1528883583.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:03.154Z,1528883583.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:03.536Z,1528883583.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:03.556Z,1528883583.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:03.935Z,1528883583.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:03.953Z,1528883583.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:04.340Z,1528883584.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:04.358Z,1528883584.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:04.746Z,1528883584.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:04.768Z,1528883584.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:05.141Z,1528883585.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:05.164Z,1528883585.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:05.534Z,1528883585.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:05.552Z,1528883585.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:05.936Z,1528883585.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:05.953Z,1528883585.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:06.335Z,1528883586.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:06.353Z,1528883586.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:06.737Z,1528883586.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:06.756Z,1528883586.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:07.136Z,1528883587.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:07.153Z,1528883587.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:07.549Z,1528883587.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:07.567Z,1528883587.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:07.945Z,1528883587.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:07.963Z,1528883587.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:08.345Z,1528883588.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:08.368Z,1528883588.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:08.735Z,1528883588.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:08.753Z,1528883588.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:09.137Z,1528883589.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:09.155Z,1528883589.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:09.536Z,1528883589.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:09.560Z,1528883589.560 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:09.560Z,1528883589.560 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 129
2018-06-13T09:53:09.560Z,1528883589.560 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:53:09.562Z,1528883589.562 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:09.562Z,1528883589.562 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 129
2018-06-13T09:53:09.562Z,1528883589.562 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:53:09.564Z,1528883589.564 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:09.564Z,1528883589.564 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 129
2018-06-13T09:53:09.564Z,1528883589.564 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:53:09.645Z,1528883589.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:53:09.645Z,1528883589.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:53:09.646Z,1528883589.646 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:53:09.926Z,1528883589.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:10.034Z,1528883590.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:53:10.034Z,1528883590.034 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 129
2018-06-13T09:53:10.035Z,1528883590.035 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:53:10.035Z,1528883590.035 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 129
2018-06-13T09:53:10.036Z,1528883590.036 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:53:10.036Z,1528883590.036 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 129
2018-06-13T09:53:10.351Z,1528883590.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:10.375Z,1528883590.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:53:10.375Z,1528883590.375 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:53:10.376Z,1528883590.376 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:53:10.376Z,1528883590.376 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:53:10.376Z,1528883590.376 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:53:10.377Z,1528883590.377 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:53:10.377Z,1528883590.377 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:53:10.378Z,1528883590.378 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:53:10.378Z,1528883590.378 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:53:10.751Z,1528883590.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:10.776Z,1528883590.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:53:10.777Z,1528883590.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:11.147Z,1528883591.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:11.164Z,1528883591.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:53:11.165Z,1528883591.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:11.531Z,1528883591.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:11.560Z,1528883591.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:53:11.561Z,1528883591.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:11.931Z,1528883591.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:11.957Z,1528883591.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:53:11.958Z,1528883591.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:12.331Z,1528883592.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:12.360Z,1528883592.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:53:12.360Z,1528883592.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:12.732Z,1528883592.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:12.772Z,1528883592.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:53:12.773Z,1528883592.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:13.131Z,1528883593.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:13.160Z,1528883593.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:53:13.161Z,1528883593.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:13.547Z,1528883593.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:13.565Z,1528883593.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:53:13.566Z,1528883593.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:13.952Z,1528883593.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:13.970Z,1528883593.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:53:13.971Z,1528883593.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:14.347Z,1528883594.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:14.365Z,1528883594.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:53:14.366Z,1528883594.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:14.731Z,1528883594.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:14.758Z,1528883594.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:53:14.759Z,1528883594.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:15.131Z,1528883595.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:15.159Z,1528883595.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:53:15.160Z,1528883595.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:15.531Z,1528883595.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:15.558Z,1528883595.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:53:15.559Z,1528883595.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:15.931Z,1528883595.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:15.958Z,1528883595.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:53:15.959Z,1528883595.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:16.352Z,1528883596.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:16.370Z,1528883596.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:53:16.371Z,1528883596.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:16.750Z,1528883596.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:16.772Z,1528883596.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:53:16.773Z,1528883596.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:17.148Z,1528883597.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:17.172Z,1528883597.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:53:17.173Z,1528883597.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:17.531Z,1528883597.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:17.564Z,1528883597.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:53:17.565Z,1528883597.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:17.931Z,1528883597.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:17.963Z,1528883597.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:53:17.964Z,1528883597.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:18.331Z,1528883598.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:18.365Z,1528883598.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:53:18.366Z,1528883598.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:18.731Z,1528883598.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:18.764Z,1528883598.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:53:18.765Z,1528883598.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:19.132Z,1528883599.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:19.167Z,1528883599.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:53:19.168Z,1528883599.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:19.546Z,1528883599.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:19.570Z,1528883599.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:53:19.571Z,1528883599.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:19.951Z,1528883599.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:19.986Z,1528883599.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:53:19.987Z,1528883599.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:20.347Z,1528883600.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:20.365Z,1528883600.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:53:20.366Z,1528883600.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:20.731Z,1528883600.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:20.768Z,1528883600.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:53:20.768Z,1528883600.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:21.132Z,1528883601.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:21.168Z,1528883601.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:53:21.169Z,1528883601.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:21.531Z,1528883601.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:21.567Z,1528883601.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:53:21.568Z,1528883601.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:21.931Z,1528883601.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:21.964Z,1528883601.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:53:21.964Z,1528883601.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:22.352Z,1528883602.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:22.376Z,1528883602.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:53:22.377Z,1528883602.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:22.751Z,1528883602.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:22.776Z,1528883602.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:53:22.777Z,1528883602.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:23.141Z,1528883603.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:23.172Z,1528883603.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:53:23.177Z,1528883603.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:23.531Z,1528883603.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:23.549Z,1528883603.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:53:23.550Z,1528883603.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:23.935Z,1528883603.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:23.980Z,1528883603.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:53:23.985Z,1528883603.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:24.335Z,1528883604.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:24.352Z,1528883604.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:53:24.353Z,1528883604.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:24.735Z,1528883604.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:24.753Z,1528883604.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:53:24.754Z,1528883604.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:25.135Z,1528883605.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:25.152Z,1528883605.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:53:25.153Z,1528883605.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:25.545Z,1528883605.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:25.579Z,1528883605.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:53:25.580Z,1528883605.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:25.945Z,1528883605.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:25.963Z,1528883605.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:53:25.964Z,1528883605.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:26.345Z,1528883606.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:26.363Z,1528883606.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:53:26.364Z,1528883606.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:26.737Z,1528883606.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:26.755Z,1528883606.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:53:26.756Z,1528883606.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:27.137Z,1528883607.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:27.155Z,1528883607.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:53:27.156Z,1528883607.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:27.539Z,1528883607.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:27.556Z,1528883607.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:53:27.557Z,1528883607.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:27.560Z,1528883607.560 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T09:53:27.560Z,1528883607.560 [Default:CheckIn:C.Wait] Stopped
2018-06-13T09:53:27.560Z,1528883607.560 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T09:53:27.561Z,1528883607.561 [Default:CheckIn:D] Running Loop=1
2018-06-13T09:53:27.938Z,1528883607.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:27.956Z,1528883607.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:53:27.957Z,1528883607.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:27.960Z,1528883607.960 [Default:CheckIn:D] Stopped
2018-06-13T09:53:27.960Z,1528883607.960 [Default:CheckIn:E] Running Loop=1
2018-06-13T09:53:28.347Z,1528883608.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:28.365Z,1528883608.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:53:28.366Z,1528883608.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:28.370Z,1528883608.370 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 386.241927 min 
2018-06-13T09:53:28.370Z,1528883608.370 [Default:CheckIn:E] Stopped
2018-06-13T09:53:28.370Z,1528883608.370 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T09:53:28.370Z,1528883608.370 [Default:CheckIn] Stopped
2018-06-13T09:53:28.370Z,1528883608.370 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T09:53:28.370Z,1528883608.370 [Default:CheckIn](INFO): Running loop #38
2018-06-13T09:53:28.370Z,1528883608.370 [Default:CheckIn] Running Loop=38
2018-06-13T09:53:28.371Z,1528883608.371 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T09:53:28.371Z,1528883608.371 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T09:53:28.751Z,1528883608.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:28.776Z,1528883608.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:53:28.776Z,1528883608.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:29.147Z,1528883609.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:29.172Z,1528883609.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:53:29.173Z,1528883609.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:29.538Z,1528883609.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:29.556Z,1528883609.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T09:53:29.557Z,1528883609.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:29.931Z,1528883609.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:29.969Z,1528883609.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:30.331Z,1528883610.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:30.372Z,1528883610.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:30.732Z,1528883610.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:30.767Z,1528883610.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:33.846Z,1528883613.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:33.874Z,1528883613.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:34.008Z,1528883614.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:34.044Z,1528883614.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:34.407Z,1528883614.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:34.425Z,1528883614.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:34.807Z,1528883614.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:34.826Z,1528883614.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:35.183Z,1528883615.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:35.217Z,1528883615.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:35.583Z,1528883615.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:35.621Z,1528883615.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:35.987Z,1528883615.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:36.004Z,1528883616.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:36.398Z,1528883616.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:36.438Z,1528883616.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:36.797Z,1528883616.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:36.831Z,1528883616.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:37.197Z,1528883617.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:37.236Z,1528883617.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:37.586Z,1528883617.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:37.604Z,1528883617.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:37.985Z,1528883617.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:38.008Z,1528883618.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:38.386Z,1528883618.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:38.404Z,1528883618.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:38.788Z,1528883618.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:38.806Z,1528883618.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:39.186Z,1528883619.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:39.207Z,1528883619.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:39.598Z,1528883619.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:39.632Z,1528883619.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:39.998Z,1528883619.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:40.015Z,1528883620.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:40.397Z,1528883620.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:40.415Z,1528883620.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:40.785Z,1528883620.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:40.804Z,1528883620.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:41.187Z,1528883621.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:41.206Z,1528883621.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:41.591Z,1528883621.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:41.608Z,1528883621.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:41.982Z,1528883621.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:42.012Z,1528883622.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:42.393Z,1528883622.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:42.411Z,1528883622.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:42.797Z,1528883622.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:42.814Z,1528883622.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:43.189Z,1528883623.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:43.207Z,1528883623.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:43.589Z,1528883623.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:43.607Z,1528883623.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:43.989Z,1528883623.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:44.006Z,1528883624.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:44.383Z,1528883624.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:44.417Z,1528883624.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:44.788Z,1528883624.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:44.806Z,1528883624.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:45.182Z,1528883625.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:45.204Z,1528883625.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:45.593Z,1528883625.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:45.632Z,1528883625.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:46.001Z,1528883626.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:46.028Z,1528883626.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:46.401Z,1528883626.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:46.436Z,1528883626.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:46.787Z,1528883626.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:46.805Z,1528883626.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:47.185Z,1528883627.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:47.203Z,1528883627.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:47.582Z,1528883627.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:47.604Z,1528883627.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:47.986Z,1528883627.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:48.004Z,1528883628.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:48.396Z,1528883628.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:48.430Z,1528883628.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:48.797Z,1528883628.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:48.841Z,1528883628.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:49.189Z,1528883629.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:49.207Z,1528883629.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:49.586Z,1528883629.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:49.603Z,1528883629.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:49.986Z,1528883629.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:50.003Z,1528883630.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:50.386Z,1528883630.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:50.405Z,1528883630.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:50.786Z,1528883630.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:50.804Z,1528883630.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:51.186Z,1528883631.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:51.204Z,1528883631.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:51.597Z,1528883631.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:51.616Z,1528883631.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:51.997Z,1528883631.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:52.015Z,1528883632.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:52.393Z,1528883632.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:52.416Z,1528883632.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:52.788Z,1528883632.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:52.806Z,1528883632.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:53.188Z,1528883633.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:53.212Z,1528883633.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:53.590Z,1528883633.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:53.607Z,1528883633.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:53.989Z,1528883633.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:54.007Z,1528883634.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:54.394Z,1528883634.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:54.412Z,1528883634.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:54.797Z,1528883634.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:54.814Z,1528883634.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:55.195Z,1528883635.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:55.213Z,1528883635.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:55.587Z,1528883635.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:55.609Z,1528883635.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:55.987Z,1528883635.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:56.010Z,1528883636.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:56.389Z,1528883636.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:56.407Z,1528883636.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:56.790Z,1528883636.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:56.807Z,1528883636.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:57.190Z,1528883637.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:57.207Z,1528883637.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:57.594Z,1528883637.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:57.612Z,1528883637.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:58.001Z,1528883638.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:58.019Z,1528883638.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:58.394Z,1528883638.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:58.412Z,1528883638.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:58.789Z,1528883638.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:58.807Z,1528883638.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:59.187Z,1528883639.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:59.209Z,1528883639.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:59.588Z,1528883639.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:53:59.616Z,1528883639.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:53:59.990Z,1528883639.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:00.008Z,1528883640.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:00.394Z,1528883640.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:00.412Z,1528883640.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:00.797Z,1528883640.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:00.815Z,1528883640.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:01.194Z,1528883641.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:01.212Z,1528883641.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:01.587Z,1528883641.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:01.609Z,1528883641.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:01.987Z,1528883641.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:02.019Z,1528883642.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:02.389Z,1528883642.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:02.407Z,1528883642.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:02.790Z,1528883642.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:02.808Z,1528883642.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:03.190Z,1528883643.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:03.208Z,1528883643.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:03.594Z,1528883643.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:03.612Z,1528883643.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:03.997Z,1528883643.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:04.016Z,1528883644.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:04.397Z,1528883644.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:04.415Z,1528883644.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:04.790Z,1528883644.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:04.807Z,1528883644.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:05.180Z,1528883645.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:05.214Z,1528883645.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:05.588Z,1528883645.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:05.618Z,1528883645.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:05.983Z,1528883645.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:06.011Z,1528883646.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:06.402Z,1528883646.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:06.419Z,1528883646.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:06.805Z,1528883646.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:06.823Z,1528883646.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:07.199Z,1528883647.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:07.217Z,1528883647.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:07.583Z,1528883647.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:07.617Z,1528883647.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:07.983Z,1528883647.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:08.018Z,1528883648.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:08.383Z,1528883648.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:08.416Z,1528883648.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:08.784Z,1528883648.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:08.827Z,1528883648.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:09.183Z,1528883649.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:09.209Z,1528883649.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:09.602Z,1528883649.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:09.630Z,1528883649.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:09.997Z,1528883649.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:10.025Z,1528883650.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:10.397Z,1528883650.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:10.426Z,1528883650.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:10.784Z,1528883650.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:10.802Z,1528883650.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:11.188Z,1528883651.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:11.205Z,1528883651.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:11.589Z,1528883651.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:11.607Z,1528883651.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:11.987Z,1528883651.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:12.005Z,1528883652.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:12.398Z,1528883652.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:12.432Z,1528883652.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:12.802Z,1528883652.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:12.836Z,1528883652.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:13.198Z,1528883653.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:13.216Z,1528883653.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:13.588Z,1528883653.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:13.608Z,1528883653.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:13.990Z,1528883653.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:14.008Z,1528883654.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:14.389Z,1528883654.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:14.407Z,1528883654.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:14.791Z,1528883654.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:14.817Z,1528883654.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:15.191Z,1528883655.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:15.208Z,1528883655.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:15.595Z,1528883655.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:15.613Z,1528883655.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:15.994Z,1528883655.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:16.012Z,1528883656.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:16.398Z,1528883656.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:16.416Z,1528883656.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:16.790Z,1528883656.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:16.807Z,1528883656.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:17.187Z,1528883657.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:17.219Z,1528883657.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:17.588Z,1528883657.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:17.615Z,1528883657.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:17.983Z,1528883657.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:18.008Z,1528883658.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:18.400Z,1528883658.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:18.418Z,1528883658.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:18.798Z,1528883658.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:18.824Z,1528883658.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:19.199Z,1528883659.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:19.224Z,1528883659.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:19.587Z,1528883659.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:19.614Z,1528883659.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:19.990Z,1528883659.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:20.011Z,1528883660.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:20.379Z,1528883660.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:20.425Z,1528883660.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:20.784Z,1528883660.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:20.819Z,1528883660.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:21.184Z,1528883661.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:21.222Z,1528883661.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:21.600Z,1528883661.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:21.618Z,1528883661.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:22.003Z,1528883662.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:22.020Z,1528883662.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:22.404Z,1528883662.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:22.422Z,1528883662.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:22.779Z,1528883662.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:22.812Z,1528883662.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:23.184Z,1528883663.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:23.218Z,1528883663.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:23.584Z,1528883663.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:23.610Z,1528883663.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:23.983Z,1528883663.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:24.001Z,1528883664.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:24.393Z,1528883664.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:24.424Z,1528883664.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:24.797Z,1528883664.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:24.823Z,1528883664.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:25.204Z,1528883665.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:25.233Z,1528883665.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:25.583Z,1528883665.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:25.617Z,1528883665.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:25.986Z,1528883665.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:26.008Z,1528883666.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:26.386Z,1528883666.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:26.404Z,1528883666.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:26.786Z,1528883666.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:26.804Z,1528883666.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:27.186Z,1528883667.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:27.204Z,1528883667.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:27.597Z,1528883667.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:27.631Z,1528883667.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:28.001Z,1528883668.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:28.035Z,1528883668.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:31.112Z,1528883671.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:31.141Z,1528883671.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:31.252Z,1528883671.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:31.305Z,1528883671.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:31.659Z,1528883671.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:31.691Z,1528883671.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:32.060Z,1528883672.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:32.093Z,1528883672.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:32.466Z,1528883672.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:32.500Z,1528883672.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:32.868Z,1528883672.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:32.898Z,1528883672.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:33.278Z,1528883673.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:33.296Z,1528883673.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:33.651Z,1528883673.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:33.668Z,1528883673.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:34.055Z,1528883674.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:34.072Z,1528883674.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:34.455Z,1528883674.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:34.474Z,1528883674.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:34.856Z,1528883674.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:34.874Z,1528883674.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:35.259Z,1528883675.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:35.276Z,1528883675.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:35.670Z,1528883675.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:35.703Z,1528883675.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:36.065Z,1528883676.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:36.102Z,1528883676.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:36.469Z,1528883676.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:36.501Z,1528883676.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:36.858Z,1528883676.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:36.876Z,1528883676.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:37.258Z,1528883677.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:37.276Z,1528883677.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:37.657Z,1528883677.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:37.675Z,1528883677.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:38.058Z,1528883678.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:38.100Z,1528883678.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:38.465Z,1528883678.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:38.504Z,1528883678.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:38.869Z,1528883678.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:38.887Z,1528883678.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:39.270Z,1528883679.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:39.287Z,1528883679.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:39.655Z,1528883679.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:39.678Z,1528883679.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:40.060Z,1528883680.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:40.078Z,1528883680.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:40.461Z,1528883680.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:40.479Z,1528883680.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:40.861Z,1528883680.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:40.879Z,1528883680.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:41.260Z,1528883681.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:41.277Z,1528883681.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:41.670Z,1528883681.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:41.688Z,1528883681.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:42.066Z,1528883682.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:42.088Z,1528883682.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:42.466Z,1528883682.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:42.484Z,1528883682.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:42.862Z,1528883682.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:42.880Z,1528883682.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:43.260Z,1528883683.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:43.278Z,1528883683.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:43.661Z,1528883683.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:43.679Z,1528883683.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:44.061Z,1528883684.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:44.079Z,1528883684.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:44.462Z,1528883684.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:44.484Z,1528883684.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:44.870Z,1528883684.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:44.888Z,1528883684.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:45.270Z,1528883685.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:45.287Z,1528883685.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:45.660Z,1528883685.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:45.678Z,1528883685.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:46.060Z,1528883686.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:46.077Z,1528883686.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:46.461Z,1528883686.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:46.479Z,1528883686.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:46.858Z,1528883686.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:46.875Z,1528883686.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:47.260Z,1528883687.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:47.278Z,1528883687.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:47.670Z,1528883687.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:47.688Z,1528883687.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:48.069Z,1528883688.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:48.111Z,1528883688.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:48.466Z,1528883688.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:48.488Z,1528883688.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:48.862Z,1528883688.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:48.880Z,1528883688.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:49.261Z,1528883689.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:49.279Z,1528883689.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:49.659Z,1528883689.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:49.686Z,1528883689.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:50.059Z,1528883690.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:50.084Z,1528883690.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:50.467Z,1528883690.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:50.492Z,1528883690.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:50.870Z,1528883690.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:50.892Z,1528883690.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:51.271Z,1528883691.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:51.289Z,1528883691.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:51.655Z,1528883691.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:51.679Z,1528883691.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:52.059Z,1528883692.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:52.082Z,1528883692.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:52.463Z,1528883692.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:52.481Z,1528883692.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:52.863Z,1528883692.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:52.880Z,1528883692.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:53.259Z,1528883693.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:53.282Z,1528883693.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:53.671Z,1528883693.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:53.689Z,1528883693.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:54.072Z,1528883694.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:54.096Z,1528883694.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:54.471Z,1528883694.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:54.489Z,1528883694.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:54.862Z,1528883694.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:54.880Z,1528883694.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:55.262Z,1528883695.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:55.284Z,1528883695.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:55.666Z,1528883695.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:55.684Z,1528883695.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:56.059Z,1528883696.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:56.085Z,1528883696.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:56.468Z,1528883696.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:56.492Z,1528883696.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:56.870Z,1528883696.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:56.892Z,1528883696.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:57.270Z,1528883697.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:57.299Z,1528883697.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:57.662Z,1528883697.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:57.679Z,1528883697.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:58.059Z,1528883698.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:58.088Z,1528883698.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:58.462Z,1528883698.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:58.481Z,1528883698.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:58.852Z,1528883698.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:58.888Z,1528883698.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:59.261Z,1528883699.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:59.280Z,1528883699.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:54:59.675Z,1528883699.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:54:59.694Z,1528883699.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:00.074Z,1528883700.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:00.093Z,1528883700.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:00.472Z,1528883700.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:00.493Z,1528883700.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:00.862Z,1528883700.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:00.885Z,1528883700.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:01.261Z,1528883701.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:01.284Z,1528883701.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:01.666Z,1528883701.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:01.684Z,1528883701.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:02.059Z,1528883702.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:02.094Z,1528883702.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:02.472Z,1528883702.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:02.496Z,1528883702.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:02.875Z,1528883702.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:02.893Z,1528883702.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:03.276Z,1528883703.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:03.300Z,1528883703.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:03.651Z,1528883703.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:03.687Z,1528883703.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:04.054Z,1528883704.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:04.092Z,1528883704.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:04.455Z,1528883704.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:04.485Z,1528883704.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:04.856Z,1528883704.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:04.884Z,1528883704.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:05.254Z,1528883705.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:05.288Z,1528883705.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:05.676Z,1528883705.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:05.694Z,1528883705.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:06.073Z,1528883706.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:06.096Z,1528883706.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:06.471Z,1528883706.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:06.490Z,1528883706.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:06.855Z,1528883706.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:06.890Z,1528883706.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:07.255Z,1528883707.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:07.293Z,1528883707.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:07.655Z,1528883707.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:07.687Z,1528883707.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:08.055Z,1528883708.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:08.096Z,1528883708.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:08.461Z,1528883708.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:08.488Z,1528883708.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:08.879Z,1528883708.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:08.897Z,1528883708.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:09.276Z,1528883709.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:09.294Z,1528883709.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:09.651Z,1528883709.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:09.693Z,1528883709.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:10.055Z,1528883710.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:10.085Z,1528883710.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:10.455Z,1528883710.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:10.474Z,1528883710.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:10.856Z,1528883710.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:10.875Z,1528883710.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:11.259Z,1528883711.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:11.277Z,1528883711.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:11.669Z,1528883711.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:11.704Z,1528883711.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:12.069Z,1528883712.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:12.108Z,1528883712.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:12.469Z,1528883712.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:12.505Z,1528883712.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:12.858Z,1528883712.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:12.877Z,1528883712.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:13.254Z,1528883713.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:13.272Z,1528883713.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:13.658Z,1528883713.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:13.680Z,1528883713.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:14.058Z,1528883714.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:14.076Z,1528883714.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:14.469Z,1528883714.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:14.505Z,1528883714.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:14.869Z,1528883714.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:14.909Z,1528883714.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:15.269Z,1528883715.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:15.308Z,1528883715.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:15.657Z,1528883715.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:15.675Z,1528883715.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:16.058Z,1528883716.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:16.076Z,1528883716.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:16.461Z,1528883716.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:16.479Z,1528883716.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:16.861Z,1528883716.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:16.879Z,1528883716.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:17.260Z,1528883717.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:17.278Z,1528883717.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:17.670Z,1528883717.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:17.716Z,1528883717.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:18.065Z,1528883718.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:18.083Z,1528883718.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:18.465Z,1528883718.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:18.483Z,1528883718.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:18.861Z,1528883718.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:18.879Z,1528883718.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:19.260Z,1528883719.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:19.278Z,1528883719.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:19.660Z,1528883719.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:19.679Z,1528883719.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:20.061Z,1528883720.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:20.080Z,1528883720.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:20.466Z,1528883720.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:20.484Z,1528883720.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:20.869Z,1528883720.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:20.892Z,1528883720.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:21.270Z,1528883721.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:21.292Z,1528883721.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:21.657Z,1528883721.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:21.675Z,1528883721.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:22.059Z,1528883722.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:22.089Z,1528883722.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:22.463Z,1528883722.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:22.481Z,1528883722.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:22.855Z,1528883722.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:22.879Z,1528883722.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:23.261Z,1528883723.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:23.279Z,1528883723.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:23.670Z,1528883723.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:23.692Z,1528883723.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:24.070Z,1528883724.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:24.092Z,1528883724.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:24.471Z,1528883724.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:24.488Z,1528883724.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:24.862Z,1528883724.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:24.880Z,1528883724.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:25.255Z,1528883725.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:25.278Z,1528883725.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:25.661Z,1528883725.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:25.679Z,1528883725.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:26.055Z,1528883726.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:26.080Z,1528883726.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:26.467Z,1528883726.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:26.492Z,1528883726.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:26.870Z,1528883726.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:26.892Z,1528883726.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:27.271Z,1528883727.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:27.289Z,1528883727.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:27.661Z,1528883727.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:27.679Z,1528883727.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:28.059Z,1528883728.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:28.089Z,1528883728.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:28.462Z,1528883728.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:28.480Z,1528883728.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:28.866Z,1528883728.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:28.884Z,1528883728.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:29.266Z,1528883729.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:29.284Z,1528883729.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:32.389Z,1528883732.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:32.430Z,1528883732.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:32.549Z,1528883732.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:32.596Z,1528883732.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:32.959Z,1528883732.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:32.977Z,1528883732.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:33.344Z,1528883733.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:33.377Z,1528883733.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:33.740Z,1528883733.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:33.778Z,1528883733.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:34.139Z,1528883734.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:34.156Z,1528883734.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:34.553Z,1528883734.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:34.583Z,1528883734.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:34.952Z,1528883734.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:34.982Z,1528883734.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:35.349Z,1528883735.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:35.384Z,1528883735.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:35.739Z,1528883735.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:35.757Z,1528883735.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:36.139Z,1528883736.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:36.156Z,1528883736.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:36.543Z,1528883736.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:36.561Z,1528883736.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:36.942Z,1528883736.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:36.960Z,1528883736.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:37.339Z,1528883737.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:37.357Z,1528883737.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:37.753Z,1528883737.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:37.787Z,1528883737.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:38.153Z,1528883738.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:38.172Z,1528883738.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:38.550Z,1528883738.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:38.567Z,1528883738.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:38.944Z,1528883738.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:38.962Z,1528883738.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:39.346Z,1528883739.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:39.364Z,1528883739.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:39.739Z,1528883739.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:39.763Z,1528883739.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:40.143Z,1528883740.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:40.177Z,1528883740.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:40.555Z,1528883740.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:40.580Z,1528883740.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:40.959Z,1528883740.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:40.976Z,1528883740.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:41.355Z,1528883741.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:41.373Z,1528883741.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:41.746Z,1528883741.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:41.768Z,1528883741.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:42.135Z,1528883742.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:42.172Z,1528883742.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:42.550Z,1528883742.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:42.572Z,1528883742.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:42.936Z,1528883742.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:42.966Z,1528883742.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:43.336Z,1528883743.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:43.372Z,1528883743.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:43.756Z,1528883743.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:43.780Z,1528883743.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:44.160Z,1528883744.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:44.178Z,1528883744.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:44.552Z,1528883744.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:44.570Z,1528883744.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:44.944Z,1528883744.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:44.968Z,1528883744.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:45.335Z,1528883745.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:45.365Z,1528883745.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:45.736Z,1528883745.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:45.771Z,1528883745.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:46.142Z,1528883746.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:46.178Z,1528883746.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:46.559Z,1528883746.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:46.578Z,1528883746.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:46.955Z,1528883746.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:46.974Z,1528883746.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:47.355Z,1528883747.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:47.373Z,1528883747.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:47.735Z,1528883747.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:47.763Z,1528883747.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:48.145Z,1528883748.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:48.165Z,1528883748.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:48.545Z,1528883748.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:48.563Z,1528883748.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:48.951Z,1528883748.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:48.968Z,1528883748.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:49.335Z,1528883749.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:49.371Z,1528883749.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:49.755Z,1528883749.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:49.773Z,1528883749.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:50.156Z,1528883750.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:50.174Z,1528883750.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:50.552Z,1528883750.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:50.569Z,1528883750.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:50.946Z,1528883750.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:50.964Z,1528883750.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:51.346Z,1528883751.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:51.363Z,1528883751.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:51.736Z,1528883751.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:51.770Z,1528883751.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:52.146Z,1528883752.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:52.163Z,1528883752.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:52.559Z,1528883752.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:52.577Z,1528883752.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:52.957Z,1528883752.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:52.974Z,1528883752.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:53.356Z,1528883753.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:53.380Z,1528883753.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:53.746Z,1528883753.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:53.764Z,1528883753.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:54.145Z,1528883754.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:54.163Z,1528883754.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:54.543Z,1528883754.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:54.577Z,1528883754.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:54.935Z,1528883754.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:54.964Z,1528883754.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:55.335Z,1528883755.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:55.362Z,1528883755.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:55.756Z,1528883755.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:55.780Z,1528883755.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:56.160Z,1528883756.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:56.178Z,1528883756.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:56.551Z,1528883756.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:56.569Z,1528883756.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:56.939Z,1528883756.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:56.975Z,1528883756.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:57.335Z,1528883757.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:57.363Z,1528883757.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:57.736Z,1528883757.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:57.765Z,1528883757.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:58.139Z,1528883758.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:58.176Z,1528883758.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:58.560Z,1528883758.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:58.578Z,1528883758.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:58.955Z,1528883758.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:58.973Z,1528883758.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:59.351Z,1528883759.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:59.369Z,1528883759.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:55:59.735Z,1528883759.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:55:59.764Z,1528883759.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:00.139Z,1528883760.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:00.166Z,1528883760.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:00.540Z,1528883760.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:00.575Z,1528883760.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:00.939Z,1528883760.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:00.967Z,1528883760.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:01.339Z,1528883761.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:01.372Z,1528883761.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:01.755Z,1528883761.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:01.773Z,1528883761.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:02.155Z,1528883762.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:02.173Z,1528883762.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:02.558Z,1528883762.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:02.580Z,1528883762.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:02.939Z,1528883762.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:02.975Z,1528883762.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:03.335Z,1528883763.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:03.372Z,1528883763.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:03.740Z,1528883763.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:03.771Z,1528883763.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:04.139Z,1528883764.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:04.171Z,1528883764.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:04.557Z,1528883764.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:04.579Z,1528883764.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:04.958Z,1528883764.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:04.976Z,1528883764.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:05.356Z,1528883765.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:05.380Z,1528883765.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:05.735Z,1528883765.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:05.776Z,1528883765.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:06.139Z,1528883766.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:06.171Z,1528883766.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:06.539Z,1528883766.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:06.572Z,1528883766.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:06.939Z,1528883766.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:06.972Z,1528883766.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:07.339Z,1528883767.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:07.378Z,1528883767.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:07.749Z,1528883767.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:07.785Z,1528883767.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:08.160Z,1528883768.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:08.184Z,1528883768.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:08.559Z,1528883768.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:08.577Z,1528883768.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:08.939Z,1528883768.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:08.972Z,1528883768.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:09.339Z,1528883769.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:09.381Z,1528883769.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:09.740Z,1528883769.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:09.757Z,1528883769.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:10.143Z,1528883770.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:10.164Z,1528883770.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:10.553Z,1528883770.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:10.594Z,1528883770.594 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:10.594Z,1528883770.594 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 130
2018-06-13T09:56:10.594Z,1528883770.594 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:56:10.596Z,1528883770.596 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:10.596Z,1528883770.596 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 130
2018-06-13T09:56:10.596Z,1528883770.596 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:56:10.598Z,1528883770.598 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:10.598Z,1528883770.598 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 130
2018-06-13T09:56:10.598Z,1528883770.598 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:56:10.673Z,1528883770.673 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:56:10.673Z,1528883770.673 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:56:10.673Z,1528883770.673 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:56:10.949Z,1528883770.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:11.053Z,1528883771.053 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:56:11.053Z,1528883771.053 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 130
2018-06-13T09:56:11.054Z,1528883771.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:56:11.054Z,1528883771.054 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 130
2018-06-13T09:56:11.054Z,1528883771.054 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:56:11.054Z,1528883771.054 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 130
2018-06-13T09:56:11.353Z,1528883771.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:11.391Z,1528883771.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:56:11.391Z,1528883771.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:56:11.391Z,1528883771.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:56:11.392Z,1528883771.392 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:56:11.392Z,1528883771.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:56:11.397Z,1528883771.397 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:56:11.398Z,1528883771.398 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:56:11.398Z,1528883771.398 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:56:11.398Z,1528883771.398 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:56:11.746Z,1528883771.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:11.763Z,1528883771.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:56:11.764Z,1528883771.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:12.146Z,1528883772.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:12.164Z,1528883772.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:56:12.165Z,1528883772.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:12.543Z,1528883772.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:12.565Z,1528883772.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:56:12.566Z,1528883772.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:12.942Z,1528883772.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:12.959Z,1528883772.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:56:12.960Z,1528883772.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:13.345Z,1528883773.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:13.362Z,1528883773.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:56:13.363Z,1528883773.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:13.750Z,1528883773.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:13.771Z,1528883773.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:56:13.772Z,1528883773.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:14.154Z,1528883774.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:14.172Z,1528883774.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:56:14.172Z,1528883774.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:14.550Z,1528883774.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:14.572Z,1528883774.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:56:14.573Z,1528883774.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:14.945Z,1528883774.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:14.962Z,1528883774.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:56:14.963Z,1528883774.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:15.346Z,1528883775.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:15.363Z,1528883775.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T09:56:15.364Z,1528883775.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:15.745Z,1528883775.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:15.763Z,1528883775.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T09:56:15.764Z,1528883775.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:16.143Z,1528883776.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:16.165Z,1528883776.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:56:16.166Z,1528883776.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:16.553Z,1528883776.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:16.571Z,1528883776.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T09:56:16.572Z,1528883776.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:16.957Z,1528883776.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:16.975Z,1528883776.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:56:16.975Z,1528883776.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:17.350Z,1528883777.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:17.372Z,1528883777.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:56:17.373Z,1528883777.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:17.746Z,1528883777.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:17.763Z,1528883777.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:56:17.764Z,1528883777.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:18.145Z,1528883778.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:18.163Z,1528883778.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:56:18.163Z,1528883778.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:18.543Z,1528883778.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:18.572Z,1528883778.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:56:18.578Z,1528883778.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:18.944Z,1528883778.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:18.978Z,1528883778.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:56:18.979Z,1528883778.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:19.345Z,1528883779.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:19.363Z,1528883779.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:56:19.363Z,1528883779.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:19.755Z,1528883779.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:19.773Z,1528883779.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:56:19.774Z,1528883779.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:20.155Z,1528883780.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:20.180Z,1528883780.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:56:20.180Z,1528883780.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:20.556Z,1528883780.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:20.573Z,1528883780.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:56:20.574Z,1528883780.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:20.949Z,1528883780.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:20.972Z,1528883780.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:56:20.973Z,1528883780.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:21.348Z,1528883781.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:21.365Z,1528883781.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:56:21.366Z,1528883781.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:21.747Z,1528883781.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:21.765Z,1528883781.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:56:21.766Z,1528883781.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:22.143Z,1528883782.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:22.166Z,1528883782.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:56:22.167Z,1528883782.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:22.558Z,1528883782.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:22.599Z,1528883782.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:56:22.600Z,1528883782.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:22.956Z,1528883782.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:22.974Z,1528883782.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:56:22.975Z,1528883782.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:23.356Z,1528883783.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:23.380Z,1528883783.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:56:23.381Z,1528883783.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:23.747Z,1528883783.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:23.765Z,1528883783.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:56:23.766Z,1528883783.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:24.135Z,1528883784.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:24.173Z,1528883784.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:56:24.174Z,1528883784.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:24.539Z,1528883784.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:24.575Z,1528883784.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:56:24.576Z,1528883784.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:24.940Z,1528883784.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:24.976Z,1528883784.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:56:24.977Z,1528883784.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:25.335Z,1528883785.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:25.372Z,1528883785.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:56:25.373Z,1528883785.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:25.754Z,1528883785.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:25.779Z,1528883785.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:56:25.780Z,1528883785.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:26.159Z,1528883786.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:26.184Z,1528883786.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:56:26.185Z,1528883786.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:26.545Z,1528883786.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:26.580Z,1528883786.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:56:26.582Z,1528883786.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:26.939Z,1528883786.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:26.974Z,1528883786.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:56:26.975Z,1528883786.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:27.339Z,1528883787.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:27.372Z,1528883787.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:56:27.373Z,1528883787.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:27.744Z,1528883787.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:27.771Z,1528883787.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:56:27.772Z,1528883787.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:28.139Z,1528883788.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:28.175Z,1528883788.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:56:28.176Z,1528883788.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:28.565Z,1528883788.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:28.583Z,1528883788.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:56:28.584Z,1528883788.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:28.959Z,1528883788.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:28.976Z,1528883788.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:56:28.978Z,1528883788.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:29.364Z,1528883789.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:29.384Z,1528883789.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:56:29.385Z,1528883789.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:32.466Z,1528883792.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:32.483Z,1528883792.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:32.584Z,1528883792.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:32.633Z,1528883792.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:33.009Z,1528883793.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:33.026Z,1528883793.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:33.417Z,1528883793.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:33.435Z,1528883793.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:33.798Z,1528883793.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:33.827Z,1528883793.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:34.188Z,1528883794.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:34.226Z,1528883794.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:34.589Z,1528883794.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:34.624Z,1528883794.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:34.987Z,1528883794.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:35.028Z,1528883795.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:35.391Z,1528883795.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:35.410Z,1528883795.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:35.803Z,1528883795.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:35.837Z,1528883795.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:36.198Z,1528883796.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:36.232Z,1528883796.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:36.603Z,1528883796.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:36.640Z,1528883796.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:36.990Z,1528883796.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:37.009Z,1528883797.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:37.392Z,1528883797.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:37.411Z,1528883797.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:37.792Z,1528883797.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:37.811Z,1528883797.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:38.194Z,1528883798.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:38.220Z,1528883798.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:38.599Z,1528883798.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:38.624Z,1528883798.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:39.002Z,1528883799.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:39.020Z,1528883799.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:39.401Z,1528883799.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:39.419Z,1528883799.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:39.789Z,1528883799.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:39.807Z,1528883799.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:40.191Z,1528883800.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:40.223Z,1528883800.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:40.591Z,1528883800.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:40.633Z,1528883800.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:40.994Z,1528883800.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:41.012Z,1528883801.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:41.394Z,1528883801.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:41.412Z,1528883801.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:41.802Z,1528883801.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:41.843Z,1528883801.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:42.202Z,1528883802.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:42.220Z,1528883802.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:42.599Z,1528883802.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:42.616Z,1528883802.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:42.994Z,1528883802.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:43.012Z,1528883803.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:43.387Z,1528883803.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:43.412Z,1528883803.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:43.791Z,1528883803.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:43.823Z,1528883803.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:44.194Z,1528883804.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:44.219Z,1528883804.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:44.598Z,1528883804.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:44.616Z,1528883804.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:45.002Z,1528883805.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:45.020Z,1528883805.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:45.402Z,1528883805.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:45.421Z,1528883805.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:45.793Z,1528883805.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:45.816Z,1528883805.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:46.192Z,1528883806.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:46.223Z,1528883806.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:46.594Z,1528883806.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:46.612Z,1528883806.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:46.987Z,1528883806.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:47.012Z,1528883807.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:47.391Z,1528883807.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:47.414Z,1528883807.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:47.803Z,1528883807.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:47.821Z,1528883807.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:48.204Z,1528883808.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:48.228Z,1528883808.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:48.602Z,1528883808.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:48.620Z,1528883808.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:48.994Z,1528883808.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:49.020Z,1528883809.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:49.383Z,1528883809.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:49.416Z,1528883809.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:49.791Z,1528883809.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:49.816Z,1528883809.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:50.194Z,1528883810.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:50.229Z,1528883810.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:50.604Z,1528883810.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:50.622Z,1528883810.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:51.011Z,1528883811.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:51.028Z,1528883811.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:51.408Z,1528883811.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:51.426Z,1528883811.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:51.783Z,1528883811.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:51.819Z,1528883811.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:52.187Z,1528883812.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:52.223Z,1528883812.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:52.587Z,1528883812.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:52.621Z,1528883812.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:52.996Z,1528883812.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:53.015Z,1528883813.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:53.387Z,1528883813.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:53.415Z,1528883813.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:53.808Z,1528883813.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:53.826Z,1528883813.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:54.204Z,1528883814.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:54.222Z,1528883814.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:54.604Z,1528883814.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:54.622Z,1528883814.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:54.987Z,1528883814.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:55.019Z,1528883815.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:55.387Z,1528883815.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:55.415Z,1528883815.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:55.788Z,1528883815.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:55.823Z,1528883815.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:56.187Z,1528883816.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:56.228Z,1528883816.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:56.594Z,1528883816.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:56.612Z,1528883816.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:57.001Z,1528883817.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:57.035Z,1528883817.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:57.402Z,1528883817.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:57.420Z,1528883817.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:57.792Z,1528883817.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:57.811Z,1528883817.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:58.194Z,1528883818.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:58.213Z,1528883818.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:58.594Z,1528883818.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:58.612Z,1528883818.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:58.990Z,1528883818.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:59.008Z,1528883819.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:59.392Z,1528883819.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:59.411Z,1528883819.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:56:59.803Z,1528883819.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:56:59.821Z,1528883819.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:00.202Z,1528883820.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:00.220Z,1528883820.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:00.598Z,1528883820.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:00.616Z,1528883820.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:00.994Z,1528883820.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:01.013Z,1528883821.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:01.387Z,1528883821.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:01.417Z,1528883821.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:01.792Z,1528883821.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:01.814Z,1528883821.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:02.191Z,1528883822.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:02.230Z,1528883822.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:02.605Z,1528883822.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:02.623Z,1528883822.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:03.006Z,1528883823.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:03.024Z,1528883823.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:03.404Z,1528883823.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:03.422Z,1528883823.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:03.795Z,1528883823.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:03.813Z,1528883823.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:04.191Z,1528883824.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:04.216Z,1528883824.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:04.591Z,1528883824.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:04.620Z,1528883824.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:04.995Z,1528883824.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:05.014Z,1528883825.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:05.391Z,1528883825.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:05.416Z,1528883825.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:05.809Z,1528883825.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:05.827Z,1528883825.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:06.205Z,1528883826.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:06.223Z,1528883826.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:06.604Z,1528883826.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:06.628Z,1528883826.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:06.994Z,1528883826.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:07.020Z,1528883827.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:07.388Z,1528883827.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:07.417Z,1528883827.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:07.788Z,1528883827.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:07.819Z,1528883827.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:08.199Z,1528883828.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:08.225Z,1528883828.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:08.598Z,1528883828.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:08.632Z,1528883828.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:09.007Z,1528883829.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:09.026Z,1528883829.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:09.409Z,1528883829.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:09.427Z,1528883829.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:09.788Z,1528883829.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:09.815Z,1528883829.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:10.187Z,1528883830.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:10.224Z,1528883830.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:10.608Z,1528883830.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:10.626Z,1528883830.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:11.008Z,1528883831.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:11.026Z,1528883831.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:11.402Z,1528883831.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:11.435Z,1528883831.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:11.788Z,1528883831.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:11.818Z,1528883831.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:12.188Z,1528883832.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:12.217Z,1528883832.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:12.608Z,1528883832.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:12.632Z,1528883832.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:13.009Z,1528883833.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:13.027Z,1528883833.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:13.398Z,1528883833.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:13.422Z,1528883833.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:13.788Z,1528883833.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:13.817Z,1528883833.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:14.188Z,1528883834.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:14.218Z,1528883834.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:14.605Z,1528883834.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:14.623Z,1528883834.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:15.009Z,1528883835.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:15.032Z,1528883835.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:15.409Z,1528883835.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:15.428Z,1528883835.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:15.784Z,1528883835.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:15.820Z,1528883835.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:16.187Z,1528883836.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:16.224Z,1528883836.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:16.608Z,1528883836.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:16.626Z,1528883836.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:17.011Z,1528883837.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:17.036Z,1528883837.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:17.404Z,1528883837.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:17.422Z,1528883837.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:17.788Z,1528883837.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:17.819Z,1528883837.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:18.184Z,1528883838.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:18.219Z,1528883838.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:18.604Z,1528883838.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:18.629Z,1528883838.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:19.008Z,1528883839.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:19.026Z,1528883839.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:19.400Z,1528883839.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:19.418Z,1528883839.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:19.788Z,1528883839.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:19.816Z,1528883839.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:20.187Z,1528883840.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:20.222Z,1528883840.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:20.598Z,1528883840.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:20.627Z,1528883840.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:21.008Z,1528883841.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:21.026Z,1528883841.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:21.408Z,1528883841.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:21.426Z,1528883841.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:21.784Z,1528883841.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:21.817Z,1528883841.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:22.187Z,1528883842.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:22.223Z,1528883842.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:22.608Z,1528883842.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:22.626Z,1528883842.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:23.004Z,1528883843.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:23.025Z,1528883843.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:23.404Z,1528883843.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:23.428Z,1528883843.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:23.798Z,1528883843.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:23.816Z,1528883843.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:24.187Z,1528883844.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:24.220Z,1528883844.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:24.604Z,1528883844.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:24.622Z,1528883844.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:25.008Z,1528883845.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:25.026Z,1528883845.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:25.396Z,1528883845.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:25.421Z,1528883845.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:25.788Z,1528883845.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:25.818Z,1528883845.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:26.187Z,1528883846.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:26.228Z,1528883846.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:26.605Z,1528883846.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:26.623Z,1528883846.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:27.008Z,1528883847.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:27.032Z,1528883847.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:27.409Z,1528883847.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:27.427Z,1528883847.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:27.788Z,1528883847.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:27.821Z,1528883847.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:28.191Z,1528883848.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:28.219Z,1528883848.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:28.613Z,1528883848.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:28.631Z,1528883848.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:29.012Z,1528883849.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:29.030Z,1528883849.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:29.408Z,1528883849.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:29.426Z,1528883849.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:32.511Z,1528883852.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:32.534Z,1528883852.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:32.643Z,1528883852.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:32.684Z,1528883852.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:33.068Z,1528883853.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:33.085Z,1528883853.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:33.471Z,1528883853.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:33.489Z,1528883853.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:33.864Z,1528883853.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:33.884Z,1528883853.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:34.247Z,1528883854.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:34.283Z,1528883854.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:34.647Z,1528883854.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:34.684Z,1528883854.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:35.044Z,1528883855.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:35.078Z,1528883855.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:35.447Z,1528883855.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:35.480Z,1528883855.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:35.861Z,1528883855.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:35.891Z,1528883855.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:36.261Z,1528883856.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:36.296Z,1528883856.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:36.658Z,1528883856.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:36.685Z,1528883856.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:37.047Z,1528883857.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:37.081Z,1528883857.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:37.447Z,1528883857.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:37.492Z,1528883857.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:37.852Z,1528883857.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:37.869Z,1528883857.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:38.256Z,1528883858.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:38.274Z,1528883858.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:38.654Z,1528883858.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:38.672Z,1528883858.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:39.061Z,1528883859.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:39.079Z,1528883859.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:39.461Z,1528883859.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:39.479Z,1528883859.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:39.852Z,1528883859.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:39.870Z,1528883859.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:40.253Z,1528883860.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:40.270Z,1528883860.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:40.654Z,1528883860.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:40.672Z,1528883860.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:41.053Z,1528883861.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:41.071Z,1528883861.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:41.452Z,1528883861.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:41.480Z,1528883861.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:41.861Z,1528883861.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:41.880Z,1528883861.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:42.258Z,1528883862.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:42.280Z,1528883862.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:42.658Z,1528883862.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:42.680Z,1528883862.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:43.054Z,1528883863.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:43.072Z,1528883863.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:43.447Z,1528883863.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:43.484Z,1528883863.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:43.851Z,1528883863.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:43.883Z,1528883863.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:44.251Z,1528883864.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:44.288Z,1528883864.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:44.663Z,1528883864.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:44.681Z,1528883864.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:45.062Z,1528883865.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:45.084Z,1528883865.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:45.463Z,1528883865.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:45.482Z,1528883865.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:45.847Z,1528883865.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:45.871Z,1528883865.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:46.258Z,1528883866.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:46.276Z,1528883866.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:46.654Z,1528883866.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:46.685Z,1528883866.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:47.047Z,1528883867.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:47.071Z,1528883867.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:47.451Z,1528883867.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:47.475Z,1528883867.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:47.863Z,1528883867.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:47.882Z,1528883867.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:48.264Z,1528883868.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:48.282Z,1528883868.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:48.663Z,1528883868.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:48.681Z,1528883868.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:49.055Z,1528883869.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:49.073Z,1528883869.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:49.447Z,1528883869.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:49.471Z,1528883869.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:49.851Z,1528883869.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:49.877Z,1528883869.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:50.251Z,1528883870.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:50.270Z,1528883870.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:50.658Z,1528883870.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:50.689Z,1528883870.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:51.070Z,1528883871.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:51.088Z,1528883871.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:51.463Z,1528883871.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:51.487Z,1528883871.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:51.844Z,1528883871.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:51.880Z,1528883871.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:52.247Z,1528883872.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:52.275Z,1528883872.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:52.664Z,1528883872.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:52.683Z,1528883872.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:53.062Z,1528883873.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:53.081Z,1528883873.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:53.462Z,1528883873.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:53.491Z,1528883873.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:53.843Z,1528883873.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:53.882Z,1528883873.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:54.243Z,1528883874.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:54.260Z,1528883874.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:54.657Z,1528883874.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:54.684Z,1528883874.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:55.062Z,1528883875.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:55.090Z,1528883875.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:55.454Z,1528883875.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:55.491Z,1528883875.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:55.848Z,1528883875.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:55.878Z,1528883875.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:56.247Z,1528883876.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:56.264Z,1528883876.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:56.657Z,1528883876.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:56.691Z,1528883876.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:57.066Z,1528883877.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:57.099Z,1528883877.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:57.461Z,1528883877.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:57.502Z,1528883877.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:57.852Z,1528883877.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:57.870Z,1528883877.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:58.251Z,1528883878.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:58.268Z,1528883878.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:58.660Z,1528883878.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:58.698Z,1528883878.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:59.058Z,1528883879.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:59.076Z,1528883879.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:59.462Z,1528883879.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:59.480Z,1528883879.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:57:59.851Z,1528883879.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:57:59.869Z,1528883879.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:00.252Z,1528883880.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:00.271Z,1528883880.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:00.657Z,1528883880.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:00.676Z,1528883880.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:01.057Z,1528883881.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:01.080Z,1528883881.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:01.454Z,1528883881.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:01.476Z,1528883881.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:01.852Z,1528883881.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:01.889Z,1528883881.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:02.250Z,1528883882.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:02.272Z,1528883882.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:02.661Z,1528883882.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:02.687Z,1528883882.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:03.062Z,1528883883.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:03.084Z,1528883883.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:03.463Z,1528883883.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:03.480Z,1528883883.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:03.847Z,1528883883.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:03.871Z,1528883883.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:04.251Z,1528883884.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:04.274Z,1528883884.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:04.663Z,1528883884.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:04.681Z,1528883884.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:05.062Z,1528883885.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:05.084Z,1528883885.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:05.461Z,1528883885.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:05.484Z,1528883885.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:05.854Z,1528883885.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:05.872Z,1528883885.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:06.253Z,1528883886.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:06.276Z,1528883886.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:06.663Z,1528883886.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:06.681Z,1528883886.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:07.063Z,1528883887.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:07.080Z,1528883887.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:07.463Z,1528883887.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:07.481Z,1528883887.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:07.851Z,1528883887.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:07.875Z,1528883887.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:08.254Z,1528883888.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:08.271Z,1528883888.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:08.663Z,1528883888.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:08.688Z,1528883888.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:09.062Z,1528883889.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:09.084Z,1528883889.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:09.463Z,1528883889.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:09.481Z,1528883889.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:09.854Z,1528883889.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:09.876Z,1528883889.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:10.251Z,1528883890.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:10.274Z,1528883890.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:10.663Z,1528883890.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:10.689Z,1528883890.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:11.062Z,1528883891.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:11.084Z,1528883891.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:11.463Z,1528883891.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:11.480Z,1528883891.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:11.850Z,1528883891.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:11.872Z,1528883891.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:12.253Z,1528883892.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:12.271Z,1528883892.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:12.662Z,1528883892.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:12.680Z,1528883892.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:13.065Z,1528883893.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:13.088Z,1528883893.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:13.463Z,1528883893.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:13.481Z,1528883893.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:13.854Z,1528883893.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:13.872Z,1528883893.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:14.254Z,1528883894.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:14.271Z,1528883894.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:14.662Z,1528883894.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:14.684Z,1528883894.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:15.062Z,1528883895.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:15.084Z,1528883895.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:15.463Z,1528883895.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:15.482Z,1528883895.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:15.854Z,1528883895.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:15.876Z,1528883895.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:16.258Z,1528883896.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:16.276Z,1528883896.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:16.665Z,1528883896.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:16.688Z,1528883896.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:17.062Z,1528883897.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:17.084Z,1528883897.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:17.463Z,1528883897.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:17.480Z,1528883897.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:17.859Z,1528883897.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:17.877Z,1528883897.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:18.258Z,1528883898.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:18.280Z,1528883898.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:18.663Z,1528883898.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:18.681Z,1528883898.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:19.063Z,1528883899.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:19.081Z,1528883899.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:19.466Z,1528883899.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:19.491Z,1528883899.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:19.858Z,1528883899.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:19.876Z,1528883899.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:20.251Z,1528883900.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:20.291Z,1528883900.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:20.666Z,1528883900.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:20.688Z,1528883900.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:21.071Z,1528883901.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:21.089Z,1528883901.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:21.471Z,1528883901.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:21.496Z,1528883901.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:21.852Z,1528883901.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:21.879Z,1528883901.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:22.247Z,1528883902.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:22.276Z,1528883902.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:22.668Z,1528883902.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:22.686Z,1528883902.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:23.071Z,1528883903.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:23.089Z,1528883903.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:23.467Z,1528883903.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:23.485Z,1528883903.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:23.847Z,1528883903.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:23.890Z,1528883903.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:24.250Z,1528883904.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:24.278Z,1528883904.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:24.651Z,1528883904.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:24.678Z,1528883904.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:25.069Z,1528883905.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:25.087Z,1528883905.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:25.467Z,1528883905.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:25.485Z,1528883905.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:25.862Z,1528883905.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:25.894Z,1528883905.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:26.250Z,1528883906.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:26.279Z,1528883906.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:26.651Z,1528883906.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:26.678Z,1528883906.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:27.048Z,1528883907.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:27.085Z,1528883907.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:27.448Z,1528883907.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:27.485Z,1528883907.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:27.872Z,1528883907.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:27.890Z,1528883907.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:28.275Z,1528883908.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:28.293Z,1528883908.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:31.379Z,1528883911.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:31.398Z,1528883911.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:31.401Z,1528883911.401 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T09:53:28.4Z
2018-06-13T09:58:31.401Z,1528883911.401 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T09:58:31.401Z,1528883911.401 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T09:58:31.539Z,1528883911.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:31.556Z,1528883911.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:32.682Z,1528883912.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:32.700Z,1528883912.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:32.835Z,1528883912.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:32.878Z,1528883912.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:33.241Z,1528883913.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:33.259Z,1528883913.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:33.642Z,1528883913.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:33.685Z,1528883913.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:34.038Z,1528883914.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:34.056Z,1528883914.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:34.432Z,1528883914.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:34.450Z,1528883914.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:34.833Z,1528883914.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:34.856Z,1528883914.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:37.939Z,1528883917.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:37.957Z,1528883917.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:38.066Z,1528883918.066 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0152.lzma
2018-06-13T09:58:38.109Z,1528883918.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:38.156Z,1528883918.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:38.503Z,1528883918.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:38.521Z,1528883918.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:38.862Z,1528883918.862 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0152.lzma.bak
2018-06-13T09:58:38.862Z,1528883918.862 [DataOverHttps](INFO): SBD MOMSN=8329016
2018-06-13T09:58:38.910Z,1528883918.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:38.948Z,1528883918.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:40.770Z,1528883920.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:40.805Z,1528883920.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:40.918Z,1528883920.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:40.961Z,1528883920.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:41.327Z,1528883921.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:41.353Z,1528883921.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:44.526Z,1528883924.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:44.553Z,1528883924.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:44.689Z,1528883924.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:44.716Z,1528883924.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:45.093Z,1528883925.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:45.116Z,1528883925.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:45.492Z,1528883925.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:45.516Z,1528883925.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:45.891Z,1528883925.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:45.912Z,1528883925.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:46.275Z,1528883926.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:46.302Z,1528883926.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:46.678Z,1528883926.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:46.707Z,1528883926.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:47.079Z,1528883927.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:47.132Z,1528883927.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:47.475Z,1528883927.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:47.502Z,1528883927.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:50.594Z,1528883930.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:50.612Z,1528883930.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:50.701Z,1528883930.701 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0153.lzma
2018-06-13T09:58:50.743Z,1528883930.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:50.778Z,1528883930.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:51.133Z,1528883931.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:51.168Z,1528883931.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:51.498Z,1528883931.498 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0153.lzma.bak
2018-06-13T09:58:51.498Z,1528883931.498 [DataOverHttps](INFO): SBD MOMSN=8329019
2018-06-13T09:58:51.528Z,1528883931.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:51.566Z,1528883931.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:53.378Z,1528883933.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:53.411Z,1528883933.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:53.415Z,1528883933.415 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T09:58:53.415Z,1528883933.415 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T09:58:53.415Z,1528883933.415 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T09:58:53.527Z,1528883933.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:53.565Z,1528883933.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:56.659Z,1528883936.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:56.681Z,1528883936.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:56.801Z,1528883936.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:56.825Z,1528883936.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:57.202Z,1528883937.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:57.234Z,1528883937.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:57.591Z,1528883937.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:57.632Z,1528883937.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:57.986Z,1528883937.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:58.004Z,1528883938.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:58.386Z,1528883938.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:58.404Z,1528883938.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:58.797Z,1528883938.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:58.815Z,1528883938.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:59.196Z,1528883939.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:59.214Z,1528883939.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:59.594Z,1528883939.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:58:59.612Z,1528883939.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:58:59.989Z,1528883939.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:00.012Z,1528883940.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:00.390Z,1528883940.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:00.408Z,1528883940.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:00.788Z,1528883940.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:00.812Z,1528883940.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:01.188Z,1528883941.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:01.214Z,1528883941.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:01.583Z,1528883941.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:01.606Z,1528883941.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:01.994Z,1528883941.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:02.016Z,1528883942.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:02.398Z,1528883942.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:02.416Z,1528883942.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:02.794Z,1528883942.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:02.816Z,1528883942.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:03.187Z,1528883943.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:03.219Z,1528883943.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:03.590Z,1528883943.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:03.608Z,1528883943.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:03.983Z,1528883943.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:04.015Z,1528883944.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:04.387Z,1528883944.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:04.413Z,1528883944.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:04.798Z,1528883944.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:04.816Z,1528883944.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:05.194Z,1528883945.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:05.216Z,1528883945.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:05.594Z,1528883945.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:05.616Z,1528883945.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:05.987Z,1528883945.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:06.020Z,1528883946.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:06.384Z,1528883946.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:06.415Z,1528883946.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:06.787Z,1528883946.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:06.809Z,1528883946.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:07.187Z,1528883947.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:07.214Z,1528883947.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:07.589Z,1528883947.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:07.612Z,1528883947.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:07.999Z,1528883947.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:08.017Z,1528883948.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:08.398Z,1528883948.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:08.416Z,1528883948.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:08.798Z,1528883948.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:08.816Z,1528883948.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:09.187Z,1528883949.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:09.210Z,1528883949.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:09.590Z,1528883949.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:09.608Z,1528883949.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:09.994Z,1528883949.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:10.012Z,1528883950.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:10.387Z,1528883950.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:10.410Z,1528883950.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:10.799Z,1528883950.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:10.824Z,1528883950.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:11.198Z,1528883951.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:11.216Z,1528883951.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:11.598Z,1528883951.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:11.616Z,1528883951.616 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:11.616Z,1528883951.616 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 131
2018-06-13T09:59:11.616Z,1528883951.616 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T09:59:11.618Z,1528883951.618 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:11.618Z,1528883951.618 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 131
2018-06-13T09:59:11.618Z,1528883951.618 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T09:59:11.620Z,1528883951.620 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:11.620Z,1528883951.620 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 131
2018-06-13T09:59:11.620Z,1528883951.620 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T09:59:11.709Z,1528883951.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T09:59:11.709Z,1528883951.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T09:59:11.709Z,1528883951.709 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T09:59:11.979Z,1528883951.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:12.093Z,1528883952.093 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T09:59:12.093Z,1528883952.093 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 131
2018-06-13T09:59:12.094Z,1528883952.094 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T09:59:12.094Z,1528883952.094 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 131
2018-06-13T09:59:12.094Z,1528883952.094 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T09:59:12.095Z,1528883952.095 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 131
2018-06-13T09:59:12.379Z,1528883952.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:12.405Z,1528883952.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T09:59:12.405Z,1528883952.405 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:59:12.406Z,1528883952.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:59:12.406Z,1528883952.406 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T09:59:12.407Z,1528883952.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:59:12.407Z,1528883952.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:59:12.407Z,1528883952.407 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T09:59:12.408Z,1528883952.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T09:59:12.408Z,1528883952.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T09:59:12.783Z,1528883952.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:12.812Z,1528883952.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T09:59:12.818Z,1528883952.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:13.184Z,1528883953.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:13.218Z,1528883953.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T09:59:13.219Z,1528883953.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:13.583Z,1528883953.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:13.619Z,1528883953.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T09:59:13.620Z,1528883953.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:13.993Z,1528883953.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:14.021Z,1528883954.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T09:59:14.022Z,1528883954.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:14.393Z,1528883954.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:14.422Z,1528883954.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T09:59:14.423Z,1528883954.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:14.793Z,1528883954.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:14.828Z,1528883954.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T09:59:14.829Z,1528883954.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:15.183Z,1528883955.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:15.208Z,1528883955.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T09:59:15.213Z,1528883955.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:15.583Z,1528883955.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:15.617Z,1528883955.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T09:59:15.618Z,1528883955.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:15.980Z,1528883955.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:15.997Z,1528883955.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T09:59:15.998Z,1528883955.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:16.391Z,1528883956.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:16.473Z,1528883956.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T09:59:16.474Z,1528883956.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:16.794Z,1528883956.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:16.868Z,1528883956.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T09:59:16.869Z,1528883956.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:17.194Z,1528883957.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:17.262Z,1528883957.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T09:59:17.263Z,1528883957.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:17.594Z,1528883957.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:17.747Z,1528883957.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T09:59:17.750Z,1528883957.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:17.987Z,1528883957.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:18.004Z,1528883958.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T09:59:18.005Z,1528883958.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:18.386Z,1528883958.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:18.424Z,1528883958.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T09:59:18.429Z,1528883958.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:18.799Z,1528883958.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:18.816Z,1528883958.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T09:59:18.817Z,1528883958.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:19.199Z,1528883959.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:19.216Z,1528883959.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T09:59:19.217Z,1528883959.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:19.597Z,1528883959.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:19.614Z,1528883959.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T09:59:19.615Z,1528883959.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:19.987Z,1528883959.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:20.011Z,1528883960.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T09:59:20.011Z,1528883960.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:20.390Z,1528883960.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:20.411Z,1528883960.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T09:59:20.412Z,1528883960.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:20.795Z,1528883960.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:20.817Z,1528883960.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T09:59:20.818Z,1528883960.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:21.198Z,1528883961.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:21.220Z,1528883961.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T09:59:21.221Z,1528883961.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:21.600Z,1528883961.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:21.617Z,1528883961.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T09:59:21.618Z,1528883961.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:21.991Z,1528883961.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:22.009Z,1528883962.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T09:59:22.010Z,1528883962.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:22.387Z,1528883962.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:22.410Z,1528883962.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T09:59:22.411Z,1528883962.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:22.799Z,1528883962.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:22.816Z,1528883962.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T09:59:22.817Z,1528883962.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:23.201Z,1528883963.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:23.218Z,1528883963.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T09:59:23.219Z,1528883963.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:23.600Z,1528883963.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:23.617Z,1528883963.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T09:59:23.618Z,1528883963.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:23.986Z,1528883963.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:24.004Z,1528883964.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T09:59:24.004Z,1528883964.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:24.379Z,1528883964.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:24.408Z,1528883964.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T09:59:24.409Z,1528883964.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:24.800Z,1528883964.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:24.824Z,1528883964.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T09:59:24.824Z,1528883964.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:25.203Z,1528883965.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:25.220Z,1528883965.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T09:59:25.221Z,1528883965.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:25.595Z,1528883965.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:25.615Z,1528883965.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T09:59:25.616Z,1528883965.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:25.987Z,1528883965.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:26.021Z,1528883966.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T09:59:26.022Z,1528883966.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:26.383Z,1528883966.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:26.412Z,1528883966.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T09:59:26.412Z,1528883966.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:26.796Z,1528883966.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:26.814Z,1528883966.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T09:59:26.815Z,1528883966.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:27.203Z,1528883967.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:27.222Z,1528883967.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T09:59:27.222Z,1528883967.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:27.604Z,1528883967.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:27.622Z,1528883967.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T09:59:27.623Z,1528883967.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:27.979Z,1528883967.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:28.005Z,1528883968.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T09:59:28.006Z,1528883968.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:28.384Z,1528883968.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:28.411Z,1528883968.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T09:59:28.412Z,1528883968.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:28.804Z,1528883968.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:28.821Z,1528883968.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T09:59:28.822Z,1528883968.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:29.201Z,1528883969.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:29.218Z,1528883969.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T09:59:29.219Z,1528883969.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:29.600Z,1528883969.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:29.617Z,1528883969.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T09:59:29.618Z,1528883969.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:29.984Z,1528883969.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:30.011Z,1528883970.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T09:59:30.012Z,1528883970.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:30.379Z,1528883970.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:30.419Z,1528883970.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T09:59:30.420Z,1528883970.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:30.800Z,1528883970.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:30.818Z,1528883970.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T09:59:30.819Z,1528883970.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:31.206Z,1528883971.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:31.227Z,1528883971.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T09:59:31.228Z,1528883971.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:31.600Z,1528883971.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:31.618Z,1528883971.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:31.984Z,1528883971.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:32.018Z,1528883972.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:32.383Z,1528883972.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:32.420Z,1528883972.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:32.796Z,1528883972.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:32.814Z,1528883972.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:33.204Z,1528883973.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:33.228Z,1528883973.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:33.599Z,1528883973.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:33.632Z,1528883973.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:33.980Z,1528883973.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:34.015Z,1528883974.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:34.383Z,1528883974.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:34.418Z,1528883974.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:34.803Z,1528883974.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:34.821Z,1528883974.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:35.200Z,1528883975.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:35.217Z,1528883975.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:35.593Z,1528883975.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:35.629Z,1528883975.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:35.983Z,1528883975.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:36.020Z,1528883976.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:36.379Z,1528883976.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:36.415Z,1528883976.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:36.800Z,1528883976.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:36.817Z,1528883976.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:37.200Z,1528883977.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:37.228Z,1528883977.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:37.600Z,1528883977.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:37.617Z,1528883977.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:37.988Z,1528883977.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:38.018Z,1528883978.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:38.383Z,1528883978.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:38.411Z,1528883978.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:38.800Z,1528883978.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:38.818Z,1528883978.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:39.199Z,1528883979.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:39.217Z,1528883979.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:39.608Z,1528883979.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:39.626Z,1528883979.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:39.984Z,1528883979.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:40.022Z,1528883980.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:40.383Z,1528883980.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:40.416Z,1528883980.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:40.793Z,1528883980.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:40.828Z,1528883980.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:41.197Z,1528883981.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:41.232Z,1528883981.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:41.593Z,1528883981.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:41.627Z,1528883981.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:41.984Z,1528883981.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:42.028Z,1528883982.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:42.379Z,1528883982.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:42.396Z,1528883982.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:42.797Z,1528883982.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:42.832Z,1528883982.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:43.197Z,1528883983.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:43.232Z,1528883983.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:43.589Z,1528883983.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:43.623Z,1528883983.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:43.984Z,1528883983.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:44.018Z,1528883984.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:44.387Z,1528883984.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:44.428Z,1528883984.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:44.798Z,1528883984.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:44.825Z,1528883984.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:45.197Z,1528883985.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:45.224Z,1528883985.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:45.598Z,1528883985.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:45.626Z,1528883985.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:45.988Z,1528883985.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:46.022Z,1528883986.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:46.387Z,1528883986.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:46.404Z,1528883986.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:46.797Z,1528883986.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:46.836Z,1528883986.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:47.197Z,1528883987.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:47.230Z,1528883987.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:47.602Z,1528883987.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:47.627Z,1528883987.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:47.988Z,1528883987.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:48.006Z,1528883988.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:48.382Z,1528883988.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:48.400Z,1528883988.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:48.798Z,1528883988.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:48.831Z,1528883988.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:49.203Z,1528883989.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:49.237Z,1528883989.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:49.602Z,1528883989.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:49.639Z,1528883989.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:49.990Z,1528883989.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:50.008Z,1528883990.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:50.390Z,1528883990.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:50.408Z,1528883990.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:50.793Z,1528883990.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:50.812Z,1528883990.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:51.201Z,1528883991.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:51.219Z,1528883991.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:51.602Z,1528883991.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:51.620Z,1528883991.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:51.989Z,1528883991.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:52.007Z,1528883992.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:52.389Z,1528883992.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:52.419Z,1528883992.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:52.794Z,1528883992.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:52.813Z,1528883992.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:53.202Z,1528883993.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:53.220Z,1528883993.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:53.602Z,1528883993.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:53.620Z,1528883993.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:54.003Z,1528883994.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:54.021Z,1528883994.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:57.103Z,1528883997.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:57.120Z,1528883997.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:57.222Z,1528883997.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:57.263Z,1528883997.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:57.654Z,1528883997.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:57.671Z,1528883997.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:58.046Z,1528883998.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:58.064Z,1528883998.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:58.444Z,1528883998.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:58.462Z,1528883998.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:58.827Z,1528883998.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:58.862Z,1528883998.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:59.228Z,1528883999.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:59.262Z,1528883999.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T09:59:59.627Z,1528883999.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T09:59:59.644Z,1528883999.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:00.041Z,1528884000.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:00.070Z,1528884000.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:00.441Z,1528884000.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:00.468Z,1528884000.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:00.838Z,1528884000.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:00.871Z,1528884000.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:01.227Z,1528884001.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:01.245Z,1528884001.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:01.627Z,1528884001.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:01.645Z,1528884001.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:02.031Z,1528884002.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:02.049Z,1528884002.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:02.431Z,1528884002.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:02.449Z,1528884002.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:02.841Z,1528884002.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:02.874Z,1528884002.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:03.245Z,1528884003.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:03.270Z,1528884003.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:03.645Z,1528884003.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:03.672Z,1528884003.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:04.031Z,1528884004.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:04.049Z,1528884004.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:04.430Z,1528884004.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:04.473Z,1528884004.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:04.841Z,1528884004.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:04.875Z,1528884004.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:05.245Z,1528884005.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:05.283Z,1528884005.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:05.638Z,1528884005.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:05.656Z,1528884005.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:06.034Z,1528884006.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:06.052Z,1528884006.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:06.431Z,1528884006.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:06.456Z,1528884006.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:06.846Z,1528884006.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:06.864Z,1528884006.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:07.242Z,1528884007.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:07.260Z,1528884007.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:07.638Z,1528884007.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:07.656Z,1528884007.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:08.031Z,1528884008.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:08.064Z,1528884008.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:08.434Z,1528884008.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:08.457Z,1528884008.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:08.838Z,1528884008.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:08.861Z,1528884008.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:09.242Z,1528884009.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:09.260Z,1528884009.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:09.639Z,1528884009.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:09.656Z,1528884009.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:10.034Z,1528884010.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:10.052Z,1528884010.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:10.431Z,1528884010.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:10.462Z,1528884010.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:10.841Z,1528884010.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:10.859Z,1528884010.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:11.242Z,1528884011.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:11.260Z,1528884011.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:11.641Z,1528884011.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:11.659Z,1528884011.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:12.032Z,1528884012.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:12.049Z,1528884012.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:12.434Z,1528884012.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:12.452Z,1528884012.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:12.839Z,1528884012.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:12.857Z,1528884012.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:13.245Z,1528884013.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:13.262Z,1528884013.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:13.642Z,1528884013.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:13.660Z,1528884013.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:14.031Z,1528884014.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:14.058Z,1528884014.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:14.434Z,1528884014.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:14.451Z,1528884014.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:14.843Z,1528884014.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:14.868Z,1528884014.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:15.246Z,1528884015.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:15.263Z,1528884015.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:15.642Z,1528884015.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:15.668Z,1528884015.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:16.034Z,1528884016.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:16.053Z,1528884016.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:16.435Z,1528884016.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:16.454Z,1528884016.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:16.843Z,1528884016.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:16.861Z,1528884016.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:17.242Z,1528884017.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:17.264Z,1528884017.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:17.642Z,1528884017.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:17.659Z,1528884017.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:18.038Z,1528884018.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:18.060Z,1528884018.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:18.437Z,1528884018.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:18.454Z,1528884018.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:18.842Z,1528884018.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:18.863Z,1528884018.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:19.242Z,1528884019.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:19.260Z,1528884019.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:19.643Z,1528884019.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:19.660Z,1528884019.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:20.038Z,1528884020.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:20.055Z,1528884020.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:20.438Z,1528884020.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:20.460Z,1528884020.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:20.843Z,1528884020.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:20.868Z,1528884020.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:21.243Z,1528884021.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:21.261Z,1528884021.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:21.643Z,1528884021.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:21.660Z,1528884021.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:22.038Z,1528884022.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:22.056Z,1528884022.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:22.432Z,1528884022.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:22.450Z,1528884022.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:22.845Z,1528884022.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:22.868Z,1528884022.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:23.242Z,1528884023.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:23.264Z,1528884023.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:23.642Z,1528884023.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:23.660Z,1528884023.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:24.034Z,1528884024.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:24.051Z,1528884024.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:24.437Z,1528884024.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:24.463Z,1528884024.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:24.836Z,1528884024.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:24.854Z,1528884024.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:25.245Z,1528884025.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:25.268Z,1528884025.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:25.646Z,1528884025.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:25.664Z,1528884025.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:26.044Z,1528884026.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:26.083Z,1528884026.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:26.437Z,1528884026.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:26.454Z,1528884026.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:26.837Z,1528884026.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:26.854Z,1528884026.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:27.238Z,1528884027.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:27.255Z,1528884027.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:27.635Z,1528884027.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:27.660Z,1528884027.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:28.043Z,1528884028.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:28.061Z,1528884028.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:28.446Z,1528884028.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:28.463Z,1528884028.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:28.842Z,1528884028.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:28.860Z,1528884028.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:29.236Z,1528884029.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:29.254Z,1528884029.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:29.631Z,1528884029.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:29.656Z,1528884029.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:30.036Z,1528884030.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:30.054Z,1528884030.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:30.439Z,1528884030.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:30.456Z,1528884030.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:30.832Z,1528884030.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:30.858Z,1528884030.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:31.246Z,1528884031.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:31.264Z,1528884031.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:31.642Z,1528884031.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:31.664Z,1528884031.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:32.042Z,1528884032.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:32.064Z,1528884032.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:32.436Z,1528884032.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:32.456Z,1528884032.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:32.837Z,1528884032.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:32.855Z,1528884032.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:33.237Z,1528884033.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:33.255Z,1528884033.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:33.638Z,1528884033.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:33.660Z,1528884033.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:34.044Z,1528884034.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:34.062Z,1528884034.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:34.445Z,1528884034.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:34.468Z,1528884034.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:34.844Z,1528884034.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:34.868Z,1528884034.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:35.239Z,1528884035.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:35.257Z,1528884035.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:35.631Z,1528884035.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:35.658Z,1528884035.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:36.036Z,1528884036.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:36.066Z,1528884036.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:36.436Z,1528884036.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:36.454Z,1528884036.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:36.835Z,1528884036.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:36.853Z,1528884036.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:37.211Z,1528884037.211 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T10:00:37.211Z,1528884037.211 [NAL9602] Data Fault, FailCount= 1
2018-06-13T10:00:37.211Z,1528884037.211 [NAL9602](ERROR): Data Fault
2018-06-13T10:00:37.235Z,1528884037.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:37.273Z,1528884037.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:37.365Z,1528884037.365 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T10:00:37.610Z,1528884037.610 [NAL9602](INFO): Powering down
2018-06-13T10:00:37.634Z,1528884037.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:37.672Z,1528884037.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:38.036Z,1528884038.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:38.060Z,1528884038.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:38.436Z,1528884038.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:38.453Z,1528884038.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:38.537Z,1528884038.537 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T10:00:38.537Z,1528884038.537 [NAL9602] No Fault, FailCount= 1
2018-06-13T10:00:38.823Z,1528884038.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:38.864Z,1528884038.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:39.234Z,1528884039.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:39.259Z,1528884039.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:39.624Z,1528884039.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:39.660Z,1528884039.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:40.037Z,1528884040.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:40.055Z,1528884040.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:40.430Z,1528884040.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:40.472Z,1528884040.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:40.834Z,1528884040.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:40.865Z,1528884040.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:41.223Z,1528884041.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:41.256Z,1528884041.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:41.636Z,1528884041.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:41.654Z,1528884041.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:42.034Z,1528884042.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:42.063Z,1528884042.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:42.433Z,1528884042.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:42.455Z,1528884042.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:42.832Z,1528884042.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:42.859Z,1528884042.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:43.236Z,1528884043.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:43.253Z,1528884043.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:43.622Z,1528884043.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:43.668Z,1528884043.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:44.030Z,1528884044.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:44.065Z,1528884044.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:44.426Z,1528884044.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:44.465Z,1528884044.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:44.836Z,1528884044.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:44.855Z,1528884044.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:45.226Z,1528884045.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:45.268Z,1528884045.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:45.626Z,1528884045.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:45.660Z,1528884045.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:46.022Z,1528884046.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:46.059Z,1528884046.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:46.428Z,1528884046.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:46.464Z,1528884046.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:46.826Z,1528884046.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:46.867Z,1528884046.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:47.222Z,1528884047.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:47.268Z,1528884047.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:47.626Z,1528884047.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:47.669Z,1528884047.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:48.028Z,1528884048.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:48.058Z,1528884048.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:48.422Z,1528884048.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:48.456Z,1528884048.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:48.827Z,1528884048.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:48.860Z,1528884048.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:49.226Z,1528884049.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:49.267Z,1528884049.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:49.623Z,1528884049.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:49.667Z,1528884049.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:50.030Z,1528884050.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:50.076Z,1528884050.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:50.427Z,1528884050.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:50.460Z,1528884050.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:50.827Z,1528884050.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:50.867Z,1528884050.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:51.227Z,1528884051.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:51.260Z,1528884051.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:51.627Z,1528884051.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:51.671Z,1528884051.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:52.022Z,1528884052.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:52.126Z,1528884052.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:52.425Z,1528884052.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:52.464Z,1528884052.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:52.826Z,1528884052.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:52.864Z,1528884052.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:53.222Z,1528884053.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:53.258Z,1528884053.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:53.630Z,1528884053.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:53.664Z,1528884053.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:54.030Z,1528884054.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:54.063Z,1528884054.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:57.148Z,1528884057.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:57.166Z,1528884057.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:57.302Z,1528884057.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:57.319Z,1528884057.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:57.695Z,1528884057.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:57.720Z,1528884057.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:58.097Z,1528884058.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:58.115Z,1528884058.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:58.495Z,1528884058.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:58.520Z,1528884058.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:58.896Z,1528884058.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:58.920Z,1528884058.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:59.282Z,1528884059.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:59.320Z,1528884059.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:00:59.688Z,1528884059.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:00:59.723Z,1528884059.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:00.088Z,1528884060.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:00.116Z,1528884060.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:00.484Z,1528884060.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:00.515Z,1528884060.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:00.886Z,1528884060.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:00.920Z,1528884060.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:01.289Z,1528884061.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:01.316Z,1528884061.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:01.686Z,1528884061.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:01.728Z,1528884061.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:02.090Z,1528884062.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:02.124Z,1528884062.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:02.486Z,1528884062.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:02.527Z,1528884062.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:02.889Z,1528884062.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:02.916Z,1528884062.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:03.291Z,1528884063.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:03.318Z,1528884063.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:03.690Z,1528884063.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:03.718Z,1528884063.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:04.082Z,1528884064.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:04.108Z,1528884064.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:04.489Z,1528884064.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:04.528Z,1528884064.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:04.885Z,1528884064.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:04.918Z,1528884064.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:05.288Z,1528884065.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:05.314Z,1528884065.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:05.686Z,1528884065.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:05.728Z,1528884065.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:06.088Z,1528884066.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:06.108Z,1528884066.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:06.494Z,1528884066.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:06.528Z,1528884066.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:06.891Z,1528884066.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:06.909Z,1528884066.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:07.290Z,1528884067.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:07.308Z,1528884067.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:07.669Z,1528884067.669 [NAL9602](INFO): Powering up NAL9602
2018-06-13T10:01:07.688Z,1528884067.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:07.709Z,1528884067.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:08.093Z,1528884068.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:08.111Z,1528884068.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:08.493Z,1528884068.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:08.510Z,1528884068.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:08.894Z,1528884068.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:08.912Z,1528884068.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:09.291Z,1528884069.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:09.312Z,1528884069.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:09.691Z,1528884069.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:09.709Z,1528884069.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:10.089Z,1528884070.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:10.107Z,1528884070.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:10.492Z,1528884070.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:10.518Z,1528884070.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:10.892Z,1528884070.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:10.913Z,1528884070.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:11.291Z,1528884071.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:11.309Z,1528884071.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:11.691Z,1528884071.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:11.724Z,1528884071.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:12.093Z,1528884072.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:12.111Z,1528884072.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:12.492Z,1528884072.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:12.515Z,1528884072.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:12.895Z,1528884072.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:12.913Z,1528884072.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:13.296Z,1528884073.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:13.314Z,1528884073.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:13.692Z,1528884073.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:13.710Z,1528884073.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:14.092Z,1528884074.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:14.139Z,1528884074.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:14.494Z,1528884074.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:14.521Z,1528884074.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:14.897Z,1528884074.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:14.915Z,1528884074.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:15.292Z,1528884075.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:15.324Z,1528884075.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:15.692Z,1528884075.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:15.728Z,1528884075.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:16.090Z,1528884076.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:16.128Z,1528884076.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:16.495Z,1528884076.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:16.517Z,1528884076.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:16.897Z,1528884076.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:16.915Z,1528884076.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:17.289Z,1528884077.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:17.324Z,1528884077.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:17.692Z,1528884077.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:17.719Z,1528884077.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:18.106Z,1528884078.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:18.132Z,1528884078.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:18.470Z,1528884078.470 [NAL9602](INFO): NAL9602 initialized
2018-06-13T10:01:18.499Z,1528884078.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:18.517Z,1528884078.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:18.891Z,1528884078.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:18.936Z,1528884078.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:19.305Z,1528884079.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:19.354Z,1528884079.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:19.707Z,1528884079.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:19.725Z,1528884079.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:20.107Z,1528884080.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:20.124Z,1528884080.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:20.491Z,1528884080.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:20.532Z,1528884080.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:20.883Z,1528884080.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:20.933Z,1528884080.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:21.292Z,1528884081.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:21.326Z,1528884081.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:21.704Z,1528884081.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:21.734Z,1528884081.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:22.103Z,1528884082.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:22.153Z,1528884082.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:22.509Z,1528884082.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:22.550Z,1528884082.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:22.887Z,1528884082.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:22.922Z,1528884082.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:23.285Z,1528884083.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:23.321Z,1528884083.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:23.688Z,1528884083.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:23.732Z,1528884083.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:24.083Z,1528884084.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:24.123Z,1528884084.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:24.502Z,1528884084.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:24.526Z,1528884084.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:24.907Z,1528884084.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:24.937Z,1528884084.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:25.304Z,1528884085.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:25.340Z,1528884085.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:25.687Z,1528884085.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:25.727Z,1528884085.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:26.084Z,1528884086.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:26.131Z,1528884086.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:26.490Z,1528884086.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:26.526Z,1528884086.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:26.884Z,1528884086.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:26.936Z,1528884086.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:27.288Z,1528884087.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:27.321Z,1528884087.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:27.698Z,1528884087.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:27.730Z,1528884087.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:28.104Z,1528884088.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:28.133Z,1528884088.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:28.503Z,1528884088.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:28.552Z,1528884088.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:28.887Z,1528884088.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:28.936Z,1528884088.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:29.283Z,1528884089.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:29.305Z,1528884089.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:29.687Z,1528884089.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:29.710Z,1528884089.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:30.090Z,1528884090.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:30.139Z,1528884090.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:30.501Z,1528884090.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:30.541Z,1528884090.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:30.902Z,1528884090.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:30.939Z,1528884090.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:31.308Z,1528884091.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:31.343Z,1528884091.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:31.686Z,1528884091.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:31.736Z,1528884091.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:32.090Z,1528884092.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:32.107Z,1528884092.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:32.490Z,1528884092.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:32.514Z,1528884092.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:32.889Z,1528884092.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:32.911Z,1528884092.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:33.295Z,1528884093.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:33.312Z,1528884093.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:33.701Z,1528884093.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:33.742Z,1528884093.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:34.101Z,1528884094.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:34.124Z,1528884094.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:34.504Z,1528884094.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:34.528Z,1528884094.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:34.891Z,1528884094.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:34.944Z,1528884094.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:35.293Z,1528884095.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:35.312Z,1528884095.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:35.694Z,1528884095.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:35.716Z,1528884095.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:36.093Z,1528884096.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:36.116Z,1528884096.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:36.498Z,1528884096.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:36.516Z,1528884096.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:36.902Z,1528884096.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:36.954Z,1528884096.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:37.302Z,1528884097.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:37.326Z,1528884097.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:37.688Z,1528884097.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:37.711Z,1528884097.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:38.095Z,1528884098.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:38.112Z,1528884098.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:38.491Z,1528884098.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:38.515Z,1528884098.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:38.889Z,1528884098.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:38.907Z,1528884098.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:39.293Z,1528884099.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:39.318Z,1528884099.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:39.702Z,1528884099.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:39.720Z,1528884099.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:40.104Z,1528884100.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:40.122Z,1528884100.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:40.506Z,1528884100.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:40.529Z,1528884100.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:40.891Z,1528884100.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:40.921Z,1528884100.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:41.283Z,1528884101.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:41.311Z,1528884101.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:41.694Z,1528884101.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:41.711Z,1528884101.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:42.093Z,1528884102.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:42.111Z,1528884102.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:42.499Z,1528884102.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:42.522Z,1528884102.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:42.907Z,1528884102.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:42.928Z,1528884102.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:43.303Z,1528884103.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:43.320Z,1528884103.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:43.683Z,1528884103.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:43.721Z,1528884103.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:44.087Z,1528884104.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:44.117Z,1528884104.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:44.487Z,1528884104.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:44.524Z,1528884104.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:44.884Z,1528884104.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:44.910Z,1528884104.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:45.287Z,1528884105.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:45.314Z,1528884105.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:45.703Z,1528884105.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:45.727Z,1528884105.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:46.103Z,1528884106.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:46.120Z,1528884106.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:46.508Z,1528884106.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:46.532Z,1528884106.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:46.887Z,1528884106.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:46.916Z,1528884106.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:47.287Z,1528884107.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:47.314Z,1528884107.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:47.687Z,1528884107.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:47.715Z,1528884107.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:48.087Z,1528884108.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:48.115Z,1528884108.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:48.503Z,1528884108.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:48.521Z,1528884108.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:48.908Z,1528884108.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:48.932Z,1528884108.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:49.307Z,1528884109.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:49.325Z,1528884109.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:49.683Z,1528884109.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:49.719Z,1528884109.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:50.083Z,1528884110.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:50.119Z,1528884110.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:50.487Z,1528884110.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:50.522Z,1528884110.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:50.883Z,1528884110.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:50.913Z,1528884110.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:51.283Z,1528884111.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:51.300Z,1528884111.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:51.698Z,1528884111.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:51.727Z,1528884111.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:52.097Z,1528884112.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:52.136Z,1528884112.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:52.500Z,1528884112.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:52.532Z,1528884112.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:52.887Z,1528884112.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:52.928Z,1528884112.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:53.283Z,1528884113.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:53.300Z,1528884113.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:53.688Z,1528884113.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:53.714Z,1528884113.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:54.091Z,1528884114.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:54.108Z,1528884114.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:57.209Z,1528884117.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:57.248Z,1528884117.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:57.396Z,1528884117.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:57.415Z,1528884117.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:57.792Z,1528884117.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:57.816Z,1528884117.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:58.186Z,1528884118.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:58.211Z,1528884118.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:58.566Z,1528884118.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:58.601Z,1528884118.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:58.968Z,1528884118.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:58.999Z,1528884118.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:59.388Z,1528884119.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:59.406Z,1528884119.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:01:59.788Z,1528884119.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:01:59.812Z,1528884119.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:00.187Z,1528884120.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:00.206Z,1528884120.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:00.569Z,1528884120.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:00.603Z,1528884120.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:00.968Z,1528884120.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:01.004Z,1528884121.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:01.388Z,1528884121.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:01.406Z,1528884121.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:01.789Z,1528884121.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:01.807Z,1528884121.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:02.189Z,1528884122.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:02.208Z,1528884122.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:02.571Z,1528884122.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:02.614Z,1528884122.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:02.965Z,1528884122.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:02.995Z,1528884122.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:03.388Z,1528884123.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:03.412Z,1528884123.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:03.789Z,1528884123.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:03.809Z,1528884123.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:04.179Z,1528884124.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:04.223Z,1528884124.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:04.570Z,1528884124.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:04.604Z,1528884124.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:04.971Z,1528884124.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:05.010Z,1528884125.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:05.384Z,1528884125.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:05.414Z,1528884125.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:05.784Z,1528884125.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:05.824Z,1528884125.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:06.177Z,1528884126.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:06.218Z,1528884126.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:06.567Z,1528884126.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:06.585Z,1528884126.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:06.972Z,1528884126.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:07.020Z,1528884127.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:07.372Z,1528884127.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:07.420Z,1528884127.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:07.782Z,1528884127.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:07.816Z,1528884127.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:08.186Z,1528884128.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:08.223Z,1528884128.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:08.583Z,1528884128.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:08.620Z,1528884128.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:08.971Z,1528884128.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:08.992Z,1528884128.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:09.374Z,1528884129.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:09.392Z,1528884129.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:09.775Z,1528884129.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:09.793Z,1528884129.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:10.169Z,1528884130.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:10.223Z,1528884130.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:10.580Z,1528884130.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:10.604Z,1528884130.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:10.984Z,1528884130.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:11.017Z,1528884131.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:11.385Z,1528884131.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:11.423Z,1528884131.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:11.774Z,1528884131.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:11.819Z,1528884131.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:12.171Z,1528884132.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:12.200Z,1528884132.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:12.571Z,1528884132.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:12.591Z,1528884132.591 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:12.591Z,1528884132.591 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 132
2018-06-13T10:02:12.591Z,1528884132.591 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:02:12.593Z,1528884132.593 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:12.593Z,1528884132.593 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 132
2018-06-13T10:02:12.593Z,1528884132.593 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:02:12.595Z,1528884132.595 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:12.595Z,1528884132.595 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 132
2018-06-13T10:02:12.595Z,1528884132.595 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:02:12.669Z,1528884132.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:02:12.669Z,1528884132.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:02:12.670Z,1528884132.670 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:02:12.978Z,1528884132.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:13.089Z,1528884133.089 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:02:13.089Z,1528884133.089 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 132
2018-06-13T10:02:13.090Z,1528884133.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:02:13.090Z,1528884133.090 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 132
2018-06-13T10:02:13.090Z,1528884133.090 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:02:13.090Z,1528884133.090 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 132
2018-06-13T10:02:13.371Z,1528884133.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:13.411Z,1528884133.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:02:13.411Z,1528884133.411 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:02:13.412Z,1528884133.412 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:02:13.412Z,1528884133.412 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:02:13.430Z,1528884133.430 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:02:13.430Z,1528884133.430 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:02:13.430Z,1528884133.430 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:02:13.431Z,1528884133.431 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:02:13.431Z,1528884133.431 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:02:13.790Z,1528884133.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:13.809Z,1528884133.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:02:13.810Z,1528884133.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:14.192Z,1528884134.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:14.211Z,1528884134.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:02:14.212Z,1528884134.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:14.586Z,1528884134.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:14.604Z,1528884134.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:02:14.605Z,1528884134.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:14.963Z,1528884134.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:15.011Z,1528884135.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:02:15.012Z,1528884135.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:15.367Z,1528884135.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:15.401Z,1528884135.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:02:15.402Z,1528884135.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:15.767Z,1528884135.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:15.806Z,1528884135.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:02:15.807Z,1528884135.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:16.171Z,1528884136.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:16.206Z,1528884136.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:02:16.206Z,1528884136.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:16.577Z,1528884136.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:16.627Z,1528884136.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:02:16.628Z,1528884136.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:16.993Z,1528884136.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:17.028Z,1528884137.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:02:17.122Z,1528884137.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:17.390Z,1528884137.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:17.408Z,1528884137.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:02:17.409Z,1528884137.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:17.768Z,1528884137.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:17.804Z,1528884137.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:02:17.805Z,1528884137.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:18.167Z,1528884138.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:18.209Z,1528884138.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:02:18.210Z,1528884138.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:18.567Z,1528884138.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:18.601Z,1528884138.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:02:18.602Z,1528884138.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:18.968Z,1528884138.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:19.010Z,1528884139.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:02:19.011Z,1528884139.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:19.363Z,1528884139.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:19.409Z,1528884139.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:02:19.410Z,1528884139.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:19.781Z,1528884139.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:19.823Z,1528884139.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:02:19.824Z,1528884139.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:20.181Z,1528884140.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:20.215Z,1528884140.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:02:20.216Z,1528884140.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:20.577Z,1528884140.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:20.615Z,1528884140.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:02:20.616Z,1528884140.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:20.963Z,1528884140.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:21.018Z,1528884141.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:02:21.019Z,1528884141.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:21.367Z,1528884141.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:21.419Z,1528884141.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:02:21.420Z,1528884141.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:21.767Z,1528884141.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:21.785Z,1528884141.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:02:21.786Z,1528884141.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:22.171Z,1528884142.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:22.219Z,1528884142.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:02:22.220Z,1528884142.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:22.584Z,1528884142.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:22.621Z,1528884142.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:02:22.622Z,1528884142.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:22.982Z,1528884142.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:23.024Z,1528884143.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:02:23.025Z,1528884143.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:23.377Z,1528884143.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:23.400Z,1528884143.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:02:23.417Z,1528884143.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:23.772Z,1528884143.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:23.795Z,1528884143.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:02:23.796Z,1528884143.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:24.171Z,1528884144.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:24.194Z,1528884144.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:02:24.194Z,1528884144.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:24.572Z,1528884144.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:24.624Z,1528884144.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:02:24.625Z,1528884144.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:24.972Z,1528884144.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:24.990Z,1528884144.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:02:24.991Z,1528884144.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:25.371Z,1528884145.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:25.392Z,1528884145.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:02:25.394Z,1528884145.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:25.778Z,1528884145.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:25.800Z,1528884145.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T10:02:25.801Z,1528884145.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:26.181Z,1528884146.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:26.228Z,1528884146.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:02:26.229Z,1528884146.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:26.578Z,1528884146.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:26.595Z,1528884146.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:02:26.596Z,1528884146.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:26.974Z,1528884146.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:26.995Z,1528884146.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:02:26.998Z,1528884146.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:27.371Z,1528884147.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:27.398Z,1528884147.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:02:27.399Z,1528884147.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:27.773Z,1528884147.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:27.795Z,1528884147.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T10:02:27.796Z,1528884147.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:28.174Z,1528884148.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:28.191Z,1528884148.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:02:28.192Z,1528884148.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:28.589Z,1528884148.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:28.620Z,1528884148.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:02:28.621Z,1528884148.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:28.982Z,1528884148.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:29.022Z,1528884149.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T10:02:29.023Z,1528884149.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:29.377Z,1528884149.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:29.424Z,1528884149.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:02:29.425Z,1528884149.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:29.772Z,1528884149.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:29.789Z,1528884149.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:02:29.790Z,1528884149.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:30.172Z,1528884150.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:30.200Z,1528884150.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:02:30.225Z,1528884150.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:30.574Z,1528884150.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:30.596Z,1528884150.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:02:30.598Z,1528884150.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:30.972Z,1528884150.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:30.990Z,1528884150.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T10:02:30.991Z,1528884150.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:31.372Z,1528884151.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:31.389Z,1528884151.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:02:31.390Z,1528884151.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:31.781Z,1528884151.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:31.804Z,1528884151.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T10:02:31.817Z,1528884151.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:32.181Z,1528884152.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:32.204Z,1528884152.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:02:32.205Z,1528884152.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:32.578Z,1528884152.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:32.600Z,1528884152.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:32.974Z,1528884152.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:32.991Z,1528884152.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:33.371Z,1528884153.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:33.413Z,1528884153.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:33.773Z,1528884153.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:33.794Z,1528884153.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:34.174Z,1528884154.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:34.196Z,1528884154.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:34.583Z,1528884154.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:34.602Z,1528884154.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:34.987Z,1528884154.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:35.010Z,1528884155.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:35.388Z,1528884155.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:35.411Z,1528884155.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:35.767Z,1528884155.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:35.812Z,1528884155.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:36.166Z,1528884156.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:36.194Z,1528884156.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:36.567Z,1528884156.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:36.595Z,1528884156.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:36.968Z,1528884156.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:36.998Z,1528884156.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:37.367Z,1528884157.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:37.396Z,1528884157.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:37.788Z,1528884157.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:37.807Z,1528884157.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:38.188Z,1528884158.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:38.217Z,1528884158.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:38.583Z,1528884158.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:38.606Z,1528884158.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:38.963Z,1528884158.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:39.000Z,1528884159.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:39.367Z,1528884159.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:39.394Z,1528884159.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:39.768Z,1528884159.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:39.796Z,1528884159.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:40.167Z,1528884160.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:40.210Z,1528884160.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:40.583Z,1528884160.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:40.602Z,1528884160.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:40.987Z,1528884160.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:41.005Z,1528884161.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:41.389Z,1528884161.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:41.409Z,1528884161.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:41.767Z,1528884161.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:41.802Z,1528884161.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:42.168Z,1528884162.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:42.196Z,1528884162.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:42.571Z,1528884162.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:42.600Z,1528884162.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:42.968Z,1528884162.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:42.995Z,1528884162.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:43.367Z,1528884163.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:43.401Z,1528884163.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:43.789Z,1528884163.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:43.807Z,1528884163.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:44.188Z,1528884164.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:44.207Z,1528884164.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:44.583Z,1528884164.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:44.602Z,1528884164.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:44.963Z,1528884164.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:45.016Z,1528884165.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:45.367Z,1528884165.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:45.396Z,1528884165.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:45.767Z,1528884165.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:45.804Z,1528884165.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:46.167Z,1528884166.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:46.201Z,1528884166.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:46.584Z,1528884166.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:46.602Z,1528884166.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:46.986Z,1528884166.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:47.005Z,1528884167.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:47.377Z,1528884167.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:47.414Z,1528884167.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:47.767Z,1528884167.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:47.808Z,1528884167.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:48.167Z,1528884168.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:48.205Z,1528884168.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:48.567Z,1528884168.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:48.585Z,1528884168.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:48.972Z,1528884168.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:48.990Z,1528884168.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:49.371Z,1528884169.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:49.388Z,1528884169.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:49.781Z,1528884169.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:49.830Z,1528884169.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:50.181Z,1528884170.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:50.199Z,1528884170.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:50.577Z,1528884170.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:50.595Z,1528884170.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:50.974Z,1528884170.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:50.993Z,1528884170.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:51.371Z,1528884171.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:51.403Z,1528884171.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:51.779Z,1528884171.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:51.798Z,1528884171.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:52.170Z,1528884172.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:52.192Z,1528884172.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:52.582Z,1528884172.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:52.601Z,1528884172.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:52.983Z,1528884172.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:53.005Z,1528884173.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:53.384Z,1528884173.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:53.402Z,1528884173.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:53.778Z,1528884173.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:53.804Z,1528884173.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:54.177Z,1528884174.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:54.196Z,1528884174.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:57.286Z,1528884177.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:57.304Z,1528884177.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:57.445Z,1528884177.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:57.464Z,1528884177.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:57.841Z,1528884177.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:57.859Z,1528884177.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:58.237Z,1528884178.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:58.279Z,1528884178.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:58.636Z,1528884178.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:58.659Z,1528884178.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:59.015Z,1528884179.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:59.062Z,1528884179.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:59.411Z,1528884179.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:59.448Z,1528884179.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:02:59.816Z,1528884179.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:02:59.847Z,1528884179.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:00.216Z,1528884180.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:00.261Z,1528884180.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:00.629Z,1528884180.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:00.664Z,1528884180.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:01.029Z,1528884181.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:01.062Z,1528884181.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:01.429Z,1528884181.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:01.475Z,1528884181.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:01.811Z,1528884181.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:01.829Z,1528884181.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:02.216Z,1528884182.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:02.234Z,1528884182.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:02.616Z,1528884182.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:02.637Z,1528884182.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:03.019Z,1528884183.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:03.037Z,1528884183.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:03.419Z,1528884183.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:03.437Z,1528884183.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:03.825Z,1528884183.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:03.843Z,1528884183.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:04.225Z,1528884184.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:04.248Z,1528884184.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:04.630Z,1528884184.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:04.652Z,1528884184.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:05.023Z,1528884185.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:05.041Z,1528884185.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:05.420Z,1528884185.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:05.438Z,1528884185.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:05.821Z,1528884185.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:05.858Z,1528884185.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:06.211Z,1528884186.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:06.241Z,1528884186.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:06.634Z,1528884186.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:06.652Z,1528884186.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:07.036Z,1528884187.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:07.064Z,1528884187.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:07.435Z,1528884187.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:07.458Z,1528884187.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:07.812Z,1528884187.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:07.852Z,1528884187.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:08.215Z,1528884188.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:08.248Z,1528884188.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:08.615Z,1528884188.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:08.642Z,1528884188.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:09.016Z,1528884189.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:09.034Z,1528884189.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:09.416Z,1528884189.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:09.434Z,1528884189.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:09.829Z,1528884189.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:09.870Z,1528884189.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:10.233Z,1528884190.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:10.271Z,1528884190.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:10.629Z,1528884190.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:10.650Z,1528884190.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:11.022Z,1528884191.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:11.040Z,1528884191.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:11.419Z,1528884191.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:11.437Z,1528884191.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:11.820Z,1528884191.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:11.845Z,1528884191.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:12.219Z,1528884192.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:12.263Z,1528884192.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:12.629Z,1528884192.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:12.647Z,1528884192.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:13.029Z,1528884193.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:13.047Z,1528884193.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:13.429Z,1528884193.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:13.448Z,1528884193.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:13.822Z,1528884193.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:13.840Z,1528884193.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:14.223Z,1528884194.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:14.241Z,1528884194.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:14.622Z,1528884194.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:14.640Z,1528884194.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:15.019Z,1528884195.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:15.037Z,1528884195.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:15.419Z,1528884195.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:15.443Z,1528884195.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:15.829Z,1528884195.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:15.847Z,1528884195.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:16.232Z,1528884196.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:16.250Z,1528884196.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:16.630Z,1528884196.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:16.652Z,1528884196.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:17.019Z,1528884197.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:17.044Z,1528884197.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:17.419Z,1528884197.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:17.436Z,1528884197.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:17.820Z,1528884197.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:17.850Z,1528884197.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:18.216Z,1528884198.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:18.253Z,1528884198.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:18.631Z,1528884198.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:18.653Z,1528884198.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:19.036Z,1528884199.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:19.053Z,1528884199.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:19.435Z,1528884199.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:19.453Z,1528884199.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:19.815Z,1528884199.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:19.844Z,1528884199.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:20.215Z,1528884200.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:20.252Z,1528884200.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:20.615Z,1528884200.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:20.655Z,1528884200.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:21.013Z,1528884201.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:21.053Z,1528884201.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:21.416Z,1528884201.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:21.447Z,1528884201.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:21.836Z,1528884201.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:21.854Z,1528884201.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:22.236Z,1528884202.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:22.254Z,1528884202.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:22.635Z,1528884202.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:22.653Z,1528884202.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:23.015Z,1528884203.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:23.054Z,1528884203.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:23.411Z,1528884203.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:23.449Z,1528884203.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:23.816Z,1528884203.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:23.847Z,1528884203.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:24.216Z,1528884204.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:24.256Z,1528884204.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:24.636Z,1528884204.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:24.654Z,1528884204.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:25.034Z,1528884205.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:25.053Z,1528884205.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:25.434Z,1528884205.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:25.464Z,1528884205.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:25.812Z,1528884205.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:25.847Z,1528884205.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:26.216Z,1528884206.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:26.252Z,1528884206.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:26.615Z,1528884206.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:26.634Z,1528884206.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:27.016Z,1528884207.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:27.034Z,1528884207.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:27.417Z,1528884207.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:27.440Z,1528884207.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:27.830Z,1528884207.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:27.862Z,1528884207.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:28.233Z,1528884208.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:28.259Z,1528884208.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:28.633Z,1528884208.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:28.659Z,1528884208.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:29.012Z,1528884209.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:29.055Z,1528884209.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:29.418Z,1528884209.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:29.436Z,1528884209.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:29.819Z,1528884209.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:29.838Z,1528884209.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:30.219Z,1528884210.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:30.237Z,1528884210.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:30.633Z,1528884210.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:30.663Z,1528884210.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:31.033Z,1528884211.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:31.067Z,1528884211.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:31.429Z,1528884211.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:31.447Z,1528884211.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:31.820Z,1528884211.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:31.838Z,1528884211.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:32.222Z,1528884212.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:32.239Z,1528884212.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:32.623Z,1528884212.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:32.641Z,1528884212.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:33.020Z,1528884213.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:33.038Z,1528884213.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:33.419Z,1528884213.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:33.451Z,1528884213.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:33.829Z,1528884213.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:33.847Z,1528884213.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:34.229Z,1528884214.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:34.247Z,1528884214.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:34.630Z,1528884214.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:34.648Z,1528884214.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:35.020Z,1528884215.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:35.051Z,1528884215.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:35.421Z,1528884215.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:35.439Z,1528884215.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:35.820Z,1528884215.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:35.847Z,1528884215.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:36.223Z,1528884216.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:36.242Z,1528884216.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:36.638Z,1528884216.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:36.656Z,1528884216.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:37.034Z,1528884217.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:37.052Z,1528884217.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:37.436Z,1528884217.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:37.454Z,1528884217.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:37.822Z,1528884217.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:37.841Z,1528884217.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:38.222Z,1528884218.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:38.253Z,1528884218.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:38.619Z,1528884218.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:38.653Z,1528884218.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:39.016Z,1528884219.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:39.046Z,1528884219.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:39.411Z,1528884219.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:39.445Z,1528884219.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:39.836Z,1528884219.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:39.854Z,1528884219.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:40.232Z,1528884220.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:40.251Z,1528884220.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:40.636Z,1528884220.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:40.654Z,1528884220.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:41.015Z,1528884221.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:41.048Z,1528884221.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:41.415Z,1528884221.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:41.453Z,1528884221.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:41.816Z,1528884221.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:41.846Z,1528884221.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:42.216Z,1528884222.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:42.257Z,1528884222.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:42.629Z,1528884222.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:42.658Z,1528884222.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:43.029Z,1528884223.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:43.061Z,1528884223.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:43.429Z,1528884223.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:43.470Z,1528884223.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:43.816Z,1528884223.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:43.850Z,1528884223.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:44.217Z,1528884224.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:44.235Z,1528884224.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:44.616Z,1528884224.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:44.634Z,1528884224.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:45.016Z,1528884225.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:45.035Z,1528884225.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:45.418Z,1528884225.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:45.460Z,1528884225.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:45.830Z,1528884225.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:45.868Z,1528884225.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:46.234Z,1528884226.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:46.268Z,1528884226.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:46.629Z,1528884226.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:46.652Z,1528884226.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:47.020Z,1528884227.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:47.050Z,1528884227.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:47.418Z,1528884227.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:47.436Z,1528884227.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:47.822Z,1528884227.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:47.840Z,1528884227.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:48.222Z,1528884228.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:48.241Z,1528884228.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:48.629Z,1528884228.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:48.647Z,1528884228.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:49.029Z,1528884229.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:49.047Z,1528884229.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:49.429Z,1528884229.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:49.447Z,1528884229.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:49.818Z,1528884229.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:49.835Z,1528884229.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:50.220Z,1528884230.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:50.246Z,1528884230.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:50.615Z,1528884230.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:50.650Z,1528884230.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:51.017Z,1528884231.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:51.046Z,1528884231.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:51.416Z,1528884231.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:51.447Z,1528884231.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:51.836Z,1528884231.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:51.854Z,1528884231.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:52.233Z,1528884232.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:52.251Z,1528884232.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:52.636Z,1528884232.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:52.660Z,1528884232.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:53.016Z,1528884233.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:53.050Z,1528884233.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:53.415Z,1528884233.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:53.448Z,1528884233.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:53.816Z,1528884233.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:53.847Z,1528884233.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:53.850Z,1528884233.850 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T10:03:53.850Z,1528884233.850 [Default:CheckIn:C.Wait] Stopped
2018-06-13T10:03:53.850Z,1528884233.850 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T10:03:53.850Z,1528884233.850 [Default:CheckIn:D] Running Loop=1
2018-06-13T10:03:54.219Z,1528884234.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:54.258Z,1528884234.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:54.265Z,1528884234.265 [Default:CheckIn:D] Stopped
2018-06-13T10:03:54.265Z,1528884234.265 [Default:CheckIn:E] Running Loop=1
2018-06-13T10:03:57.354Z,1528884237.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:57.372Z,1528884237.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:57.376Z,1528884237.376 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 396.680273 min 
2018-06-13T10:03:57.376Z,1528884237.376 [Default:CheckIn:E] Stopped
2018-06-13T10:03:57.376Z,1528884237.376 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T10:03:57.376Z,1528884237.376 [Default:CheckIn] Stopped
2018-06-13T10:03:57.376Z,1528884237.376 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T10:03:57.376Z,1528884237.376 [Default:CheckIn](INFO): Running loop #39
2018-06-13T10:03:57.376Z,1528884237.376 [Default:CheckIn] Running Loop=39
2018-06-13T10:03:57.377Z,1528884237.377 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T10:03:57.377Z,1528884237.377 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T10:03:57.521Z,1528884237.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:57.561Z,1528884237.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:57.917Z,1528884237.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:57.935Z,1528884237.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:58.306Z,1528884238.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:58.325Z,1528884238.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:58.703Z,1528884238.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:58.731Z,1528884238.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:59.106Z,1528884239.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:59.128Z,1528884239.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:59.501Z,1528884239.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:59.519Z,1528884239.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:03:59.910Z,1528884239.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:03:59.934Z,1528884239.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:00.313Z,1528884240.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:00.336Z,1528884240.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:00.715Z,1528884240.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:00.733Z,1528884240.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:01.103Z,1528884241.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:01.136Z,1528884241.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:01.495Z,1528884241.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:01.532Z,1528884241.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:01.906Z,1528884241.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:01.925Z,1528884241.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:02.303Z,1528884242.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:02.326Z,1528884242.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:02.715Z,1528884242.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:02.733Z,1528884242.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:03.115Z,1528884243.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:03.163Z,1528884243.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:03.515Z,1528884243.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:03.561Z,1528884243.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:03.906Z,1528884243.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:03.928Z,1528884243.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:04.295Z,1528884244.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:04.329Z,1528884244.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:04.699Z,1528884244.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:04.726Z,1528884244.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:05.100Z,1528884245.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:05.136Z,1528884245.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:05.499Z,1528884245.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:05.535Z,1528884245.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:05.916Z,1528884245.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:05.933Z,1528884245.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:06.318Z,1528884246.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:06.347Z,1528884246.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:06.720Z,1528884246.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:06.743Z,1528884246.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:07.099Z,1528884247.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:07.129Z,1528884247.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:07.499Z,1528884247.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:07.535Z,1528884247.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:07.900Z,1528884247.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:07.934Z,1528884247.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:08.299Z,1528884248.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:08.316Z,1528884248.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:08.709Z,1528884248.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:08.749Z,1528884248.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:09.113Z,1528884249.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:09.151Z,1528884249.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:09.513Z,1528884249.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:09.556Z,1528884249.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:09.903Z,1528884249.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:09.920Z,1528884249.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:10.298Z,1528884250.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:10.315Z,1528884250.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:10.703Z,1528884250.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:10.720Z,1528884250.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:11.104Z,1528884251.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:11.122Z,1528884251.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:11.502Z,1528884251.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:11.520Z,1528884251.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:11.909Z,1528884251.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:11.927Z,1528884251.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:12.313Z,1528884252.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:12.331Z,1528884252.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:12.713Z,1528884252.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:12.736Z,1528884252.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:13.105Z,1528884253.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:13.122Z,1528884253.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:13.508Z,1528884253.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:13.526Z,1528884253.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:13.906Z,1528884253.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:13.924Z,1528884253.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:14.303Z,1528884254.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:14.325Z,1528884254.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:14.710Z,1528884254.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:14.732Z,1528884254.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:15.114Z,1528884255.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:15.132Z,1528884255.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:15.515Z,1528884255.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:15.533Z,1528884255.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:15.903Z,1528884255.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:15.926Z,1528884255.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:16.302Z,1528884256.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:16.320Z,1528884256.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:16.709Z,1528884256.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:16.726Z,1528884256.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:17.103Z,1528884257.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:17.127Z,1528884257.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:17.506Z,1528884257.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:17.524Z,1528884257.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:17.914Z,1528884257.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:17.932Z,1528884257.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:18.314Z,1528884258.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:18.332Z,1528884258.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:18.714Z,1528884258.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:18.732Z,1528884258.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:19.103Z,1528884259.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:19.127Z,1528884259.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:19.503Z,1528884259.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:19.527Z,1528884259.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:19.902Z,1528884259.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:19.920Z,1528884259.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:20.307Z,1528884260.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:20.324Z,1528884260.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:20.715Z,1528884260.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:20.733Z,1528884260.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:21.115Z,1528884261.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:21.133Z,1528884261.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:21.516Z,1528884261.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:21.533Z,1528884261.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:21.908Z,1528884261.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:21.932Z,1528884261.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:22.306Z,1528884262.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:22.325Z,1528884262.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:22.703Z,1528884262.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:22.737Z,1528884262.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:23.100Z,1528884263.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:23.134Z,1528884263.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:23.495Z,1528884263.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:23.521Z,1528884263.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:23.910Z,1528884263.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:23.939Z,1528884263.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:24.314Z,1528884264.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:24.344Z,1528884264.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:24.714Z,1528884264.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:24.742Z,1528884264.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:25.100Z,1528884265.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:25.144Z,1528884265.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:25.499Z,1528884265.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:25.517Z,1528884265.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:25.899Z,1528884265.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:25.918Z,1528884265.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:26.302Z,1528884266.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:26.325Z,1528884266.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:26.713Z,1528884266.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:26.748Z,1528884266.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:27.114Z,1528884267.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:27.132Z,1528884267.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:27.510Z,1528884267.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:27.527Z,1528884267.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:27.904Z,1528884267.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:27.922Z,1528884267.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:28.302Z,1528884268.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:28.320Z,1528884268.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:28.704Z,1528884268.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:28.722Z,1528884268.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:29.109Z,1528884269.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:29.127Z,1528884269.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:29.506Z,1528884269.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:29.524Z,1528884269.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:29.917Z,1528884269.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:29.935Z,1528884269.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:30.314Z,1528884270.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:30.331Z,1528884270.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:30.715Z,1528884270.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:30.733Z,1528884270.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:31.103Z,1528884271.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:31.126Z,1528884271.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:31.504Z,1528884271.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:31.522Z,1528884271.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:31.908Z,1528884271.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:31.926Z,1528884271.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:32.305Z,1528884272.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:32.323Z,1528884272.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:32.714Z,1528884272.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:32.740Z,1528884272.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:33.114Z,1528884273.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:33.133Z,1528884273.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:33.514Z,1528884273.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:33.532Z,1528884273.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:33.900Z,1528884273.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:33.924Z,1528884273.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:34.305Z,1528884274.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:34.323Z,1528884274.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:34.703Z,1528884274.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:34.733Z,1528884274.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:35.109Z,1528884275.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:35.126Z,1528884275.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:35.499Z,1528884275.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:35.529Z,1528884275.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:35.915Z,1528884275.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:35.933Z,1528884275.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:36.318Z,1528884276.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:36.336Z,1528884276.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:36.721Z,1528884276.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:36.739Z,1528884276.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:37.099Z,1528884277.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:37.134Z,1528884277.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:37.499Z,1528884277.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:37.526Z,1528884277.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:37.899Z,1528884277.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:37.966Z,1528884277.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:38.299Z,1528884278.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:38.332Z,1528884278.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:38.716Z,1528884278.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:38.733Z,1528884278.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:39.116Z,1528884279.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:39.133Z,1528884279.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:39.516Z,1528884279.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:39.540Z,1528884279.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:39.899Z,1528884279.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:39.926Z,1528884279.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:40.299Z,1528884280.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:40.327Z,1528884280.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:40.699Z,1528884280.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:40.733Z,1528884280.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:41.095Z,1528884281.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:41.131Z,1528884281.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:41.499Z,1528884281.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:41.528Z,1528884281.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:41.915Z,1528884281.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:41.932Z,1528884281.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:42.319Z,1528884282.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:42.336Z,1528884282.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:42.712Z,1528884282.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:42.738Z,1528884282.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:43.099Z,1528884283.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:43.126Z,1528884283.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:43.498Z,1528884283.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:43.527Z,1528884283.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:43.900Z,1528884283.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:43.928Z,1528884283.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:44.299Z,1528884284.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:44.326Z,1528884284.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:44.715Z,1528884284.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:44.733Z,1528884284.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:45.120Z,1528884285.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:45.138Z,1528884285.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:45.515Z,1528884285.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:45.534Z,1528884285.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:45.899Z,1528884285.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:45.928Z,1528884285.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:46.303Z,1528884286.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:46.332Z,1528884286.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:46.699Z,1528884286.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:46.728Z,1528884286.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:47.100Z,1528884287.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:47.127Z,1528884287.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:47.499Z,1528884287.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:47.527Z,1528884287.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:47.915Z,1528884287.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:47.933Z,1528884287.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:48.317Z,1528884288.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:48.348Z,1528884288.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:48.720Z,1528884288.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:48.738Z,1528884288.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:49.099Z,1528884289.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:49.132Z,1528884289.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:49.499Z,1528884289.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:49.527Z,1528884289.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:49.900Z,1528884289.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:49.927Z,1528884289.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:50.299Z,1528884290.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:50.332Z,1528884290.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:50.715Z,1528884290.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:50.733Z,1528884290.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:51.120Z,1528884291.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:51.138Z,1528884291.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:51.516Z,1528884291.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:51.540Z,1528884291.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:51.899Z,1528884291.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:51.927Z,1528884291.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:52.299Z,1528884292.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:52.326Z,1528884292.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:52.699Z,1528884292.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:52.726Z,1528884292.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:53.100Z,1528884293.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:53.129Z,1528884293.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:53.499Z,1528884293.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:53.527Z,1528884293.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:53.919Z,1528884293.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:53.937Z,1528884293.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:54.323Z,1528884294.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:54.341Z,1528884294.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:57.427Z,1528884297.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:57.446Z,1528884297.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:57.578Z,1528884297.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:57.623Z,1528884297.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:57.978Z,1528884297.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:57.996Z,1528884297.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:58.379Z,1528884298.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:58.404Z,1528884298.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:58.782Z,1528884298.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:58.800Z,1528884298.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:59.185Z,1528884299.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:59.208Z,1528884299.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:59.586Z,1528884299.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:59.608Z,1528884299.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:04:59.975Z,1528884299.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:04:59.998Z,1528884299.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:00.375Z,1528884300.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:00.399Z,1528884300.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:00.778Z,1528884300.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:00.796Z,1528884300.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:01.176Z,1528884301.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:01.202Z,1528884301.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:01.575Z,1528884301.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:01.599Z,1528884301.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:01.987Z,1528884301.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:02.004Z,1528884302.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:02.390Z,1528884302.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:02.407Z,1528884302.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:02.787Z,1528884302.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:02.805Z,1528884302.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:03.179Z,1528884303.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:03.198Z,1528884303.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:03.598Z,1528884303.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:03.620Z,1528884303.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:03.972Z,1528884303.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:04.012Z,1528884304.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:04.375Z,1528884304.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:04.392Z,1528884304.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:04.786Z,1528884304.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:04.819Z,1528884304.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:05.190Z,1528884305.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:05.224Z,1528884305.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:05.586Z,1528884305.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:05.604Z,1528884305.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:05.979Z,1528884305.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:05.996Z,1528884305.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:06.378Z,1528884306.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:06.404Z,1528884306.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:06.779Z,1528884306.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:06.796Z,1528884306.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:07.178Z,1528884307.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:07.196Z,1528884307.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:07.582Z,1528884307.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:07.600Z,1528884307.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:07.984Z,1528884307.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:08.002Z,1528884308.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:08.386Z,1528884308.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:08.403Z,1528884308.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:08.783Z,1528884308.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:08.816Z,1528884308.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:09.174Z,1528884309.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:09.192Z,1528884309.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:09.576Z,1528884309.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:09.606Z,1528884309.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:09.979Z,1528884309.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:09.998Z,1528884309.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:10.374Z,1528884310.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:10.392Z,1528884310.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:10.786Z,1528884310.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:10.816Z,1528884310.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:11.192Z,1528884311.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:11.210Z,1528884311.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:11.588Z,1528884311.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:11.606Z,1528884311.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:11.971Z,1528884311.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:12.009Z,1528884312.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:12.371Z,1528884312.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:12.409Z,1528884312.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:12.771Z,1528884312.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:12.800Z,1528884312.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:13.171Z,1528884313.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:13.204Z,1528884313.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:13.575Z,1528884313.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:13.603Z,1528884313.603 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:13.603Z,1528884313.603 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 133
2018-06-13T10:05:13.603Z,1528884313.603 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:05:13.605Z,1528884313.605 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:13.605Z,1528884313.605 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 133
2018-06-13T10:05:13.605Z,1528884313.605 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:05:13.607Z,1528884313.607 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:13.607Z,1528884313.607 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 133
2018-06-13T10:05:13.607Z,1528884313.607 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:05:13.685Z,1528884313.685 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:05:13.685Z,1528884313.685 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:05:13.686Z,1528884313.686 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:05:14.001Z,1528884314.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:14.089Z,1528884314.089 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:05:14.089Z,1528884314.089 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 133
2018-06-13T10:05:14.090Z,1528884314.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:05:14.090Z,1528884314.090 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 133
2018-06-13T10:05:14.090Z,1528884314.090 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:05:14.090Z,1528884314.090 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 133
2018-06-13T10:05:14.386Z,1528884314.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:14.412Z,1528884314.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:05:14.412Z,1528884314.412 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:05:14.412Z,1528884314.412 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:05:14.413Z,1528884314.413 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:05:14.413Z,1528884314.413 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:05:14.414Z,1528884314.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:05:14.414Z,1528884314.414 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:05:14.414Z,1528884314.414 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:05:14.415Z,1528884314.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:05:14.783Z,1528884314.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:14.812Z,1528884314.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:05:14.817Z,1528884314.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:15.170Z,1528884315.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:15.188Z,1528884315.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:05:15.189Z,1528884315.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:15.570Z,1528884315.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:15.600Z,1528884315.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:05:15.605Z,1528884315.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:15.975Z,1528884315.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:16.006Z,1528884316.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:05:16.007Z,1528884316.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:16.378Z,1528884316.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:16.396Z,1528884316.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:05:16.396Z,1528884316.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:16.792Z,1528884316.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:16.810Z,1528884316.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:05:16.811Z,1528884316.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:17.192Z,1528884317.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:17.209Z,1528884317.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:05:17.210Z,1528884317.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:17.588Z,1528884317.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:17.606Z,1528884317.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:05:17.607Z,1528884317.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:17.971Z,1528884317.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:18.000Z,1528884318.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:05:18.002Z,1528884318.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:18.367Z,1528884318.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:18.396Z,1528884318.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:05:18.401Z,1528884318.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:18.767Z,1528884318.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:18.797Z,1528884318.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:05:18.798Z,1528884318.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:19.172Z,1528884319.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:19.206Z,1528884319.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:05:19.207Z,1528884319.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:19.571Z,1528884319.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:19.589Z,1528884319.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:05:19.590Z,1528884319.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:19.985Z,1528884319.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:20.019Z,1528884320.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:05:20.020Z,1528884320.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:20.385Z,1528884320.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:20.421Z,1528884320.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:05:20.422Z,1528884320.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:20.786Z,1528884320.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:20.819Z,1528884320.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:05:20.820Z,1528884320.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:21.173Z,1528884321.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:21.190Z,1528884321.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:05:21.191Z,1528884321.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:21.573Z,1528884321.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:21.596Z,1528884321.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:05:21.597Z,1528884321.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:21.976Z,1528884321.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:21.994Z,1528884321.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:05:21.995Z,1528884321.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:22.374Z,1528884322.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:22.396Z,1528884322.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:05:22.397Z,1528884322.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:22.782Z,1528884322.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:22.804Z,1528884322.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:05:22.805Z,1528884322.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:23.186Z,1528884323.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:23.204Z,1528884323.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:05:23.204Z,1528884323.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:23.583Z,1528884323.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:23.601Z,1528884323.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:05:23.602Z,1528884323.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:23.977Z,1528884323.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:23.994Z,1528884323.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:05:23.995Z,1528884323.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:24.370Z,1528884324.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:24.404Z,1528884324.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:05:24.405Z,1528884324.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:24.778Z,1528884324.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:24.795Z,1528884324.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:05:24.796Z,1528884324.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:25.175Z,1528884325.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:25.208Z,1528884325.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:05:25.213Z,1528884325.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:25.574Z,1528884325.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:25.604Z,1528884325.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:05:25.609Z,1528884325.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:25.989Z,1528884325.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:26.006Z,1528884326.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:05:26.007Z,1528884326.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:26.380Z,1528884326.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:26.410Z,1528884326.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:05:26.411Z,1528884326.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:26.786Z,1528884326.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:26.809Z,1528884326.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T10:05:26.810Z,1528884326.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:27.167Z,1528884327.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:27.184Z,1528884327.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:05:27.185Z,1528884327.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:27.571Z,1528884327.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:27.588Z,1528884327.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:05:27.589Z,1528884327.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:27.976Z,1528884327.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:27.993Z,1528884327.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:05:27.994Z,1528884327.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:28.370Z,1528884328.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:28.387Z,1528884328.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:05:28.388Z,1528884328.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:28.786Z,1528884328.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:28.819Z,1528884328.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T10:05:28.820Z,1528884328.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:29.190Z,1528884329.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:29.223Z,1528884329.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:05:29.224Z,1528884329.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:29.585Z,1528884329.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:29.603Z,1528884329.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:05:29.604Z,1528884329.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:29.976Z,1528884329.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:29.994Z,1528884329.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T10:05:29.995Z,1528884329.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:30.376Z,1528884330.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:30.393Z,1528884330.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:05:30.394Z,1528884330.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:30.773Z,1528884330.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:30.796Z,1528884330.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:05:30.797Z,1528884330.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:31.177Z,1528884331.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:31.194Z,1528884331.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:05:31.195Z,1528884331.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:31.576Z,1528884331.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:31.593Z,1528884331.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:05:31.594Z,1528884331.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:31.981Z,1528884331.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:31.999Z,1528884331.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T10:05:31.000Z,1528884332.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:32.385Z,1528884332.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:32.403Z,1528884332.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:05:32.404Z,1528884332.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:32.783Z,1528884332.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:32.800Z,1528884332.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T10:05:32.801Z,1528884332.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:33.174Z,1528884333.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:33.192Z,1528884333.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:05:33.193Z,1528884333.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:33.575Z,1528884333.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:33.606Z,1528884333.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:33.981Z,1528884333.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:34.004Z,1528884334.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:34.373Z,1528884334.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:34.396Z,1528884334.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:34.782Z,1528884334.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:34.804Z,1528884334.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:35.186Z,1528884335.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:35.203Z,1528884335.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:35.583Z,1528884335.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:35.600Z,1528884335.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:35.975Z,1528884335.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:36.008Z,1528884336.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:36.375Z,1528884336.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:36.408Z,1528884336.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:36.767Z,1528884336.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:36.805Z,1528884336.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:37.175Z,1528884337.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:37.199Z,1528884337.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:37.574Z,1528884337.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:37.599Z,1528884337.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:37.988Z,1528884337.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:38.006Z,1528884338.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:38.390Z,1528884338.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:38.407Z,1528884338.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:38.787Z,1528884338.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:38.805Z,1528884338.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:39.167Z,1528884339.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:39.195Z,1528884339.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:39.575Z,1528884339.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:39.598Z,1528884339.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:39.975Z,1528884339.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:40.006Z,1528884340.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:40.367Z,1528884340.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:40.403Z,1528884340.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:40.791Z,1528884340.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:40.809Z,1528884340.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:41.191Z,1528884341.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:41.209Z,1528884341.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:41.587Z,1528884341.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:41.605Z,1528884341.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:41.971Z,1528884341.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:42.007Z,1528884342.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:42.371Z,1528884342.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:42.408Z,1528884342.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:42.767Z,1528884342.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:42.796Z,1528884342.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:43.167Z,1528884343.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:43.206Z,1528884343.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:43.571Z,1528884343.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:43.608Z,1528884343.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:43.992Z,1528884343.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:44.010Z,1528884344.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:44.392Z,1528884344.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:44.416Z,1528884344.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:44.787Z,1528884344.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:44.806Z,1528884344.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:45.167Z,1528884345.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:45.196Z,1528884345.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:45.575Z,1528884345.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:45.607Z,1528884345.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:45.972Z,1528884345.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:46.010Z,1528884346.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:46.371Z,1528884346.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:46.405Z,1528884346.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:46.785Z,1528884346.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:46.813Z,1528884346.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:47.185Z,1528884347.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:47.214Z,1528884347.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:47.585Z,1528884347.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:47.615Z,1528884347.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:47.973Z,1528884347.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:47.991Z,1528884347.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:48.375Z,1528884348.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:48.394Z,1528884348.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:48.782Z,1528884348.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:48.800Z,1528884348.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:49.186Z,1528884349.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:49.204Z,1528884349.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:49.583Z,1528884349.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:49.601Z,1528884349.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:49.974Z,1528884349.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:49.993Z,1528884349.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:50.377Z,1528884350.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:50.395Z,1528884350.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:50.778Z,1528884350.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:50.797Z,1528884350.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:51.181Z,1528884351.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:51.200Z,1528884351.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:51.582Z,1528884351.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:51.601Z,1528884351.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:51.976Z,1528884351.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:52.006Z,1528884352.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:52.375Z,1528884352.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:52.392Z,1528884352.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:52.782Z,1528884352.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:52.804Z,1528884352.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:53.190Z,1528884353.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:53.208Z,1528884353.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:53.583Z,1528884353.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:53.601Z,1528884353.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:53.982Z,1528884353.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:53.000Z,1528884354.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:54.380Z,1528884354.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:54.410Z,1528884354.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:54.787Z,1528884354.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:54.805Z,1528884354.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:55.186Z,1528884355.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:55.204Z,1528884355.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:55.586Z,1528884355.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:55.604Z,1528884355.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:58.690Z,1528884358.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:58.708Z,1528884358.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:58.847Z,1528884358.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:58.891Z,1528884358.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:59.257Z,1528884359.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:59.291Z,1528884359.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:05:59.657Z,1528884359.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:05:59.693Z,1528884359.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:00.053Z,1528884360.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:00.071Z,1528884360.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:00.446Z,1528884360.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:00.464Z,1528884360.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:00.842Z,1528884360.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:00.860Z,1528884360.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:01.244Z,1528884361.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:01.269Z,1528884361.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:01.643Z,1528884361.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:01.661Z,1528884361.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:02.051Z,1528884362.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:02.069Z,1528884362.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:02.455Z,1528884362.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:02.480Z,1528884362.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:02.854Z,1528884362.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:02.872Z,1528884362.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:03.242Z,1528884363.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:03.260Z,1528884363.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:03.635Z,1528884363.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:03.672Z,1528884363.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:04.040Z,1528884364.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:04.073Z,1528884364.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:04.435Z,1528884364.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:04.473Z,1528884364.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:04.859Z,1528884364.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:04.877Z,1528884364.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:05.259Z,1528884365.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:05.278Z,1528884365.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:05.659Z,1528884365.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:05.721Z,1528884365.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:06.039Z,1528884366.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:06.066Z,1528884366.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:06.440Z,1528884366.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:06.470Z,1528884366.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:06.835Z,1528884366.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:06.868Z,1528884366.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:07.240Z,1528884367.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:07.270Z,1528884367.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:07.639Z,1528884367.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:07.676Z,1528884367.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:08.060Z,1528884368.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:08.078Z,1528884368.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:08.459Z,1528884368.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:08.476Z,1528884368.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:08.855Z,1528884368.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:08.873Z,1528884368.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:09.235Z,1528884369.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:09.268Z,1528884369.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:09.639Z,1528884369.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:09.672Z,1528884369.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:10.043Z,1528884370.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:10.078Z,1528884370.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:10.439Z,1528884370.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:10.457Z,1528884370.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:10.853Z,1528884370.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:10.877Z,1528884370.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:11.253Z,1528884371.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:11.280Z,1528884371.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:11.649Z,1528884371.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:11.683Z,1528884371.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:12.041Z,1528884372.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:12.074Z,1528884372.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:12.442Z,1528884372.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:12.460Z,1528884372.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:12.838Z,1528884372.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:12.856Z,1528884372.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:13.241Z,1528884373.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:13.264Z,1528884373.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:13.642Z,1528884373.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:13.660Z,1528884373.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:14.050Z,1528884374.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:14.068Z,1528884374.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:14.453Z,1528884374.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:14.471Z,1528884374.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:14.849Z,1528884374.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:14.867Z,1528884374.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:15.242Z,1528884375.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:15.259Z,1528884375.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:15.644Z,1528884375.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:15.662Z,1528884375.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:16.044Z,1528884376.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:16.062Z,1528884376.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:16.442Z,1528884376.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:16.459Z,1528884376.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:16.853Z,1528884376.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:16.871Z,1528884376.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:17.253Z,1528884377.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:17.271Z,1528884377.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:17.649Z,1528884377.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:17.667Z,1528884377.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:18.044Z,1528884378.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:18.061Z,1528884378.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:18.444Z,1528884378.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:18.468Z,1528884378.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:18.842Z,1528884378.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:18.860Z,1528884378.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:19.244Z,1528884379.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:19.262Z,1528884379.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:19.644Z,1528884379.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:19.662Z,1528884379.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:20.049Z,1528884380.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:20.067Z,1528884380.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:20.453Z,1528884380.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:20.471Z,1528884380.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:20.850Z,1528884380.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:20.868Z,1528884380.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:21.242Z,1528884381.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:21.259Z,1528884381.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:21.645Z,1528884381.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:21.663Z,1528884381.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:22.038Z,1528884382.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:22.072Z,1528884382.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:22.441Z,1528884382.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:22.459Z,1528884382.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:22.850Z,1528884382.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:22.873Z,1528884382.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:23.253Z,1528884383.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:23.271Z,1528884383.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:23.651Z,1528884383.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:23.669Z,1528884383.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:24.043Z,1528884384.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:24.065Z,1528884384.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:24.445Z,1528884384.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:24.462Z,1528884384.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:24.842Z,1528884384.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:24.859Z,1528884384.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:25.240Z,1528884385.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:25.267Z,1528884385.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:25.639Z,1528884385.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:25.668Z,1528884385.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:26.060Z,1528884386.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:26.078Z,1528884386.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:26.460Z,1528884386.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:26.477Z,1528884386.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:26.855Z,1528884386.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:26.873Z,1528884386.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:27.235Z,1528884387.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:27.272Z,1528884387.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:27.639Z,1528884387.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:27.673Z,1528884387.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:28.040Z,1528884388.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:28.070Z,1528884388.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:28.435Z,1528884388.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:28.461Z,1528884388.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:28.853Z,1528884388.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:28.887Z,1528884388.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:29.253Z,1528884389.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:29.288Z,1528884389.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:29.653Z,1528884389.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:29.682Z,1528884389.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:30.039Z,1528884390.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:30.079Z,1528884390.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:30.440Z,1528884390.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:30.474Z,1528884390.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:30.839Z,1528884390.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:30.857Z,1528884390.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:31.244Z,1528884391.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:31.270Z,1528884391.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:31.643Z,1528884391.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:31.661Z,1528884391.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:32.049Z,1528884392.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:32.067Z,1528884392.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:32.458Z,1528884392.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:32.492Z,1528884392.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:32.850Z,1528884392.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:32.868Z,1528884392.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:33.243Z,1528884393.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:33.261Z,1528884393.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:33.638Z,1528884393.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:33.672Z,1528884393.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:34.044Z,1528884394.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:34.075Z,1528884394.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:34.443Z,1528884394.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:34.460Z,1528884394.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:34.854Z,1528884394.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:34.872Z,1528884394.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:35.255Z,1528884395.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:35.273Z,1528884395.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:35.656Z,1528884395.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:35.673Z,1528884395.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:36.043Z,1528884396.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:36.069Z,1528884396.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:36.445Z,1528884396.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:36.463Z,1528884396.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:36.855Z,1528884396.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:36.874Z,1528884396.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:37.255Z,1528884397.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:37.280Z,1528884397.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:37.654Z,1528884397.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:37.672Z,1528884397.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:38.043Z,1528884398.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:38.061Z,1528884398.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:38.438Z,1528884398.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:38.470Z,1528884398.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:38.854Z,1528884398.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:38.872Z,1528884398.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:39.255Z,1528884399.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:39.273Z,1528884399.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:39.655Z,1528884399.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:39.672Z,1528884399.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:40.048Z,1528884400.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:40.065Z,1528884400.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:40.441Z,1528884400.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:40.460Z,1528884400.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:40.854Z,1528884400.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:40.872Z,1528884400.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:41.254Z,1528884401.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:41.271Z,1528884401.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:41.655Z,1528884401.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:41.674Z,1528884401.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:42.047Z,1528884402.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:42.069Z,1528884402.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:42.444Z,1528884402.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:42.468Z,1528884402.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:42.855Z,1528884402.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:42.874Z,1528884402.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:43.257Z,1528884403.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:43.276Z,1528884403.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:43.651Z,1528884403.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:43.672Z,1528884403.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:44.042Z,1528884404.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:44.061Z,1528884404.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:44.443Z,1528884404.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:44.465Z,1528884404.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:44.854Z,1528884404.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:44.872Z,1528884404.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:45.255Z,1528884405.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:45.280Z,1528884405.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:45.654Z,1528884405.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:45.671Z,1528884405.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:46.045Z,1528884406.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:46.062Z,1528884406.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:46.441Z,1528884406.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:46.459Z,1528884406.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:46.854Z,1528884406.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:46.872Z,1528884406.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:47.254Z,1528884407.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:47.276Z,1528884407.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:47.655Z,1528884407.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:47.673Z,1528884407.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:48.043Z,1528884408.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:48.066Z,1528884408.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:48.440Z,1528884408.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:48.464Z,1528884408.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:48.854Z,1528884408.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:48.872Z,1528884408.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:49.254Z,1528884409.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:49.276Z,1528884409.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:49.655Z,1528884409.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:49.672Z,1528884409.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:50.046Z,1528884410.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:50.064Z,1528884410.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:50.445Z,1528884410.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:50.462Z,1528884410.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:50.854Z,1528884410.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:50.871Z,1528884410.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:51.255Z,1528884411.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:51.272Z,1528884411.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:51.654Z,1528884411.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:51.672Z,1528884411.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:52.041Z,1528884412.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:52.064Z,1528884412.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:52.445Z,1528884412.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:52.463Z,1528884412.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:52.854Z,1528884412.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:52.871Z,1528884412.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:53.253Z,1528884413.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:53.271Z,1528884413.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:53.655Z,1528884413.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:53.673Z,1528884413.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:54.045Z,1528884414.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:54.063Z,1528884414.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:54.448Z,1528884414.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:54.472Z,1528884414.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:54.857Z,1528884414.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:54.875Z,1528884414.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:55.259Z,1528884415.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:55.276Z,1528884415.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:55.648Z,1528884415.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:55.676Z,1528884415.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:58.759Z,1528884418.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:58.777Z,1528884418.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:58.887Z,1528884418.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:58.917Z,1528884418.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:59.301Z,1528884419.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:59.324Z,1528884419.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:06:59.709Z,1528884419.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:06:59.726Z,1528884419.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:00.093Z,1528884420.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:00.128Z,1528884420.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:00.483Z,1528884420.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:00.519Z,1528884420.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:00.883Z,1528884420.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:00.921Z,1528884420.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:01.283Z,1528884421.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:01.323Z,1528884421.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:01.683Z,1528884421.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:01.727Z,1528884421.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:02.098Z,1528884422.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:02.132Z,1528884422.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:02.498Z,1528884422.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:02.531Z,1528884422.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:02.893Z,1528884422.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:02.928Z,1528884422.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:03.283Z,1528884423.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:03.317Z,1528884423.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:03.683Z,1528884423.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:03.704Z,1528884423.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:04.088Z,1528884424.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:04.106Z,1528884424.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:04.487Z,1528884424.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:04.506Z,1528884424.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:04.897Z,1528884424.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:04.931Z,1528884424.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:05.297Z,1528884425.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:05.340Z,1528884425.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:05.698Z,1528884425.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:05.715Z,1528884425.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:06.082Z,1528884426.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:06.112Z,1528884426.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:06.488Z,1528884426.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:06.506Z,1528884426.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:06.898Z,1528884426.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:06.916Z,1528884426.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:07.297Z,1528884427.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:07.315Z,1528884427.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:07.690Z,1528884427.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:07.708Z,1528884427.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:08.088Z,1528884428.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:08.112Z,1528884428.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:08.488Z,1528884428.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:08.506Z,1528884428.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:08.893Z,1528884428.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:08.912Z,1528884428.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:09.298Z,1528884429.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:09.320Z,1528884429.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:09.694Z,1528884429.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:09.711Z,1528884429.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:10.088Z,1528884430.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:10.118Z,1528884430.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:10.490Z,1528884430.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:10.508Z,1528884430.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:10.894Z,1528884430.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:10.912Z,1528884430.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:11.298Z,1528884431.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:11.316Z,1528884431.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:11.697Z,1528884431.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:11.720Z,1528884431.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:12.090Z,1528884432.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:12.108Z,1528884432.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:12.489Z,1528884432.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:12.508Z,1528884432.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:12.897Z,1528884432.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:12.920Z,1528884432.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:13.297Z,1528884433.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:13.321Z,1528884433.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:13.695Z,1528884433.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:13.720Z,1528884433.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:14.092Z,1528884434.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:14.110Z,1528884434.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:14.482Z,1528884434.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:14.508Z,1528884434.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:14.900Z,1528884434.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:14.918Z,1528884434.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:15.302Z,1528884435.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:15.319Z,1528884435.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:15.698Z,1528884435.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:15.720Z,1528884435.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:16.088Z,1528884436.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:16.124Z,1528884436.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:16.480Z,1528884436.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:16.514Z,1528884436.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:16.896Z,1528884436.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:16.935Z,1528884436.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:17.298Z,1528884437.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:17.323Z,1528884437.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:17.701Z,1528884437.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:17.719Z,1528884437.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:18.079Z,1528884438.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:18.117Z,1528884438.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:18.483Z,1528884438.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:18.513Z,1528884438.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:18.906Z,1528884438.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:18.924Z,1528884438.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:19.303Z,1528884439.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:19.321Z,1528884439.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:19.699Z,1528884439.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:19.718Z,1528884439.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:20.079Z,1528884440.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:20.114Z,1528884440.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:20.479Z,1528884440.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:20.516Z,1528884440.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:20.898Z,1528884440.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:20.938Z,1528884440.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:21.301Z,1528884441.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:21.319Z,1528884441.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:21.700Z,1528884441.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:21.724Z,1528884441.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:22.080Z,1528884442.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:22.114Z,1528884442.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:22.483Z,1528884442.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:22.521Z,1528884442.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:22.899Z,1528884442.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:22.927Z,1528884442.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:23.298Z,1528884443.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:23.327Z,1528884443.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:23.694Z,1528884443.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:23.728Z,1528884443.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:24.088Z,1528884444.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:24.126Z,1528884444.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:24.487Z,1528884444.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:24.532Z,1528884444.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:24.893Z,1528884444.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:24.912Z,1528884444.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:25.297Z,1528884445.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:25.315Z,1528884445.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:25.694Z,1528884445.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:25.712Z,1528884445.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:26.089Z,1528884446.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:26.107Z,1528884446.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:26.488Z,1528884446.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:26.506Z,1528884446.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:26.893Z,1528884446.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:26.912Z,1528884446.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:27.297Z,1528884447.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:27.315Z,1528884447.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:27.694Z,1528884447.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:27.712Z,1528884447.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:28.088Z,1528884448.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:28.106Z,1528884448.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:28.486Z,1528884448.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:28.504Z,1528884448.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:28.893Z,1528884448.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:28.911Z,1528884448.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:29.297Z,1528884449.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:29.315Z,1528884449.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:29.693Z,1528884449.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:29.713Z,1528884449.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:30.088Z,1528884450.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:30.106Z,1528884450.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:30.490Z,1528884450.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:30.508Z,1528884450.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:30.893Z,1528884450.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:30.911Z,1528884450.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:31.297Z,1528884451.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:31.315Z,1528884451.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:31.693Z,1528884451.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:31.712Z,1528884451.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:32.086Z,1528884452.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:32.104Z,1528884452.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:32.488Z,1528884452.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:32.506Z,1528884452.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:32.893Z,1528884452.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:32.912Z,1528884452.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:33.293Z,1528884453.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:33.311Z,1528884453.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:33.693Z,1528884453.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:33.711Z,1528884453.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:34.088Z,1528884454.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:34.106Z,1528884454.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:34.485Z,1528884454.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:34.504Z,1528884454.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:34.893Z,1528884454.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:34.911Z,1528884454.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:35.297Z,1528884455.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:35.315Z,1528884455.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:35.693Z,1528884455.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:35.711Z,1528884455.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:36.088Z,1528884456.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:36.106Z,1528884456.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:36.487Z,1528884456.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:36.512Z,1528884456.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:36.893Z,1528884456.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:36.911Z,1528884456.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:37.297Z,1528884457.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:37.315Z,1528884457.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:37.694Z,1528884457.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:37.712Z,1528884457.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:38.086Z,1528884458.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:38.104Z,1528884458.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:38.488Z,1528884458.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:38.506Z,1528884458.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:38.888Z,1528884458.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:38.906Z,1528884458.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:39.294Z,1528884459.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:39.312Z,1528884459.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:39.697Z,1528884459.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:39.715Z,1528884459.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:40.094Z,1528884460.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:40.112Z,1528884460.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:40.486Z,1528884460.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:40.503Z,1528884460.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:40.888Z,1528884460.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:40.906Z,1528884460.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:41.288Z,1528884461.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:41.307Z,1528884461.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:41.688Z,1528884461.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:41.706Z,1528884461.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:42.098Z,1528884462.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:42.115Z,1528884462.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:42.497Z,1528884462.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:42.515Z,1528884462.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:42.893Z,1528884462.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:42.911Z,1528884462.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:43.288Z,1528884463.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:43.306Z,1528884463.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:43.688Z,1528884463.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:43.706Z,1528884463.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:44.087Z,1528884464.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:44.104Z,1528884464.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:44.488Z,1528884464.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:44.506Z,1528884464.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:44.888Z,1528884464.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:44.906Z,1528884464.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:45.293Z,1528884465.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:45.311Z,1528884465.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:45.697Z,1528884465.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:45.715Z,1528884465.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:46.094Z,1528884466.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:46.112Z,1528884466.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:46.488Z,1528884466.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:46.506Z,1528884466.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:46.888Z,1528884466.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:46.906Z,1528884466.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:47.288Z,1528884467.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:47.306Z,1528884467.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:47.688Z,1528884467.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:47.706Z,1528884467.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:48.093Z,1528884468.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:48.112Z,1528884468.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:48.497Z,1528884468.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:48.515Z,1528884468.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:48.893Z,1528884468.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:48.911Z,1528884468.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:49.288Z,1528884469.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:49.306Z,1528884469.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:49.688Z,1528884469.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:49.706Z,1528884469.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:50.086Z,1528884470.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:50.103Z,1528884470.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:50.488Z,1528884470.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:50.506Z,1528884470.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:50.888Z,1528884470.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:50.908Z,1528884470.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:51.297Z,1528884471.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:51.315Z,1528884471.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:51.697Z,1528884471.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:51.715Z,1528884471.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:52.094Z,1528884472.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:52.112Z,1528884472.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:52.487Z,1528884472.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:52.504Z,1528884472.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:52.888Z,1528884472.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:52.907Z,1528884472.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:53.288Z,1528884473.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:53.314Z,1528884473.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:53.692Z,1528884473.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:53.710Z,1528884473.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:54.097Z,1528884474.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:54.115Z,1528884474.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:54.501Z,1528884474.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:54.524Z,1528884474.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:54.900Z,1528884474.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:54.918Z,1528884474.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:55.294Z,1528884475.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:55.311Z,1528884475.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:55.695Z,1528884475.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:55.713Z,1528884475.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:58.800Z,1528884478.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:58.819Z,1528884478.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:58.941Z,1528884478.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:58.976Z,1528884478.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:59.347Z,1528884479.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:59.365Z,1528884479.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:07:59.749Z,1528884479.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:07:59.767Z,1528884479.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:00.148Z,1528884480.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:00.165Z,1528884480.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:00.527Z,1528884480.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:00.556Z,1528884480.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:00.928Z,1528884480.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:00.957Z,1528884480.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:01.328Z,1528884481.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:01.360Z,1528884481.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:01.727Z,1528884481.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:01.764Z,1528884481.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:02.146Z,1528884482.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:02.164Z,1528884482.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:02.548Z,1528884482.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:02.566Z,1528884482.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:02.948Z,1528884482.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:02.966Z,1528884482.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:03.327Z,1528884483.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:03.356Z,1528884483.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:03.727Z,1528884483.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:03.757Z,1528884483.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:04.127Z,1528884484.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:04.155Z,1528884484.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:04.527Z,1528884484.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:04.556Z,1528884484.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:04.948Z,1528884484.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:04.973Z,1528884484.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:05.348Z,1528884485.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:05.366Z,1528884485.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:05.748Z,1528884485.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:05.766Z,1528884485.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:06.132Z,1528884486.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:06.159Z,1528884486.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:06.528Z,1528884486.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:06.566Z,1528884486.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:06.945Z,1528884486.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:06.963Z,1528884486.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:07.348Z,1528884487.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:07.366Z,1528884487.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:07.744Z,1528884487.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:07.762Z,1528884487.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:08.123Z,1528884488.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:08.157Z,1528884488.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:08.528Z,1528884488.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:08.571Z,1528884488.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:08.927Z,1528884488.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:08.957Z,1528884488.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:09.341Z,1528884489.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:09.371Z,1528884489.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:09.741Z,1528884489.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:09.769Z,1528884489.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:10.137Z,1528884490.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:10.173Z,1528884490.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:10.527Z,1528884490.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:10.545Z,1528884490.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:10.931Z,1528884490.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:10.949Z,1528884490.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:11.330Z,1528884491.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:11.380Z,1528884491.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:11.726Z,1528884491.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:11.744Z,1528884491.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:12.141Z,1528884492.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:12.175Z,1528884492.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:12.541Z,1528884492.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:12.559Z,1528884492.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:12.937Z,1528884492.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:12.955Z,1528884492.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:13.332Z,1528884493.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:13.356Z,1528884493.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:13.732Z,1528884493.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:13.750Z,1528884493.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:14.130Z,1528884494.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:14.148Z,1528884494.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:14.532Z,1528884494.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:14.550Z,1528884494.550 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:14.550Z,1528884494.550 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 134
2018-06-13T10:08:14.550Z,1528884494.550 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:08:14.552Z,1528884494.552 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:14.552Z,1528884494.552 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 134
2018-06-13T10:08:14.552Z,1528884494.552 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:08:14.554Z,1528884494.554 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:14.554Z,1528884494.554 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 134
2018-06-13T10:08:14.554Z,1528884494.554 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:08:14.629Z,1528884494.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:08:14.629Z,1528884494.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:08:14.630Z,1528884494.630 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:08:14.930Z,1528884494.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:15.041Z,1528884495.041 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:08:15.041Z,1528884495.041 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 134
2018-06-13T10:08:15.042Z,1528884495.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:08:15.042Z,1528884495.042 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 134
2018-06-13T10:08:15.042Z,1528884495.042 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:08:15.042Z,1528884495.042 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 134
2018-06-13T10:08:15.344Z,1528884495.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:15.361Z,1528884495.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:08:15.362Z,1528884495.362 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:08:15.362Z,1528884495.362 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:08:15.362Z,1528884495.362 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:08:15.363Z,1528884495.363 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:08:15.363Z,1528884495.363 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:08:15.363Z,1528884495.363 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:08:15.364Z,1528884495.364 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:08:15.364Z,1528884495.364 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:08:15.742Z,1528884495.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:15.763Z,1528884495.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:08:15.764Z,1528884495.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:16.147Z,1528884496.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:16.164Z,1528884496.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:08:16.165Z,1528884496.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:16.523Z,1528884496.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:16.553Z,1528884496.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:08:16.557Z,1528884496.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:16.927Z,1528884496.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:16.944Z,1528884496.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:08:16.945Z,1528884496.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:17.332Z,1528884497.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:17.372Z,1528884497.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:08:17.377Z,1528884497.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:17.730Z,1528884497.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:17.747Z,1528884497.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:08:17.748Z,1528884497.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:18.142Z,1528884498.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:18.178Z,1528884498.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:08:18.178Z,1528884498.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:18.541Z,1528884498.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:18.575Z,1528884498.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:08:18.576Z,1528884498.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:18.937Z,1528884498.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:18.954Z,1528884498.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:08:18.955Z,1528884498.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:19.330Z,1528884499.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:19.347Z,1528884499.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:08:19.348Z,1528884499.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:19.732Z,1528884499.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:19.750Z,1528884499.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:08:19.751Z,1528884499.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:20.130Z,1528884500.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:20.148Z,1528884500.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:08:20.149Z,1528884500.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:20.532Z,1528884500.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:20.550Z,1528884500.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:08:20.551Z,1528884500.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:20.934Z,1528884500.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:20.952Z,1528884500.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:08:20.953Z,1528884500.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:21.337Z,1528884501.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:21.355Z,1528884501.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:08:21.356Z,1528884501.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:21.741Z,1528884501.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:21.758Z,1528884501.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:08:21.759Z,1528884501.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:22.138Z,1528884502.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:22.155Z,1528884502.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:08:22.156Z,1528884502.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:22.534Z,1528884502.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:22.551Z,1528884502.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:08:22.552Z,1528884502.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:22.934Z,1528884502.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:22.951Z,1528884502.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:08:22.952Z,1528884502.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:23.334Z,1528884503.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:23.351Z,1528884503.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:08:23.352Z,1528884503.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:23.730Z,1528884503.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:23.748Z,1528884503.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:08:23.748Z,1528884503.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:24.138Z,1528884504.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:24.156Z,1528884504.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:08:24.157Z,1528884504.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:24.542Z,1528884504.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:24.564Z,1528884504.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:08:24.565Z,1528884504.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:24.943Z,1528884504.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:24.961Z,1528884504.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:08:24.962Z,1528884504.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:25.331Z,1528884505.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:25.353Z,1528884505.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:08:25.354Z,1528884505.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:25.731Z,1528884505.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:25.755Z,1528884505.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:08:25.756Z,1528884505.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:26.130Z,1528884506.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:26.147Z,1528884506.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:08:26.148Z,1528884506.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:26.534Z,1528884506.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:26.551Z,1528884506.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:08:26.552Z,1528884506.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:26.931Z,1528884506.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:26.954Z,1528884506.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:08:26.955Z,1528884506.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:27.342Z,1528884507.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:27.360Z,1528884507.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:08:27.361Z,1528884507.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:27.742Z,1528884507.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:27.764Z,1528884507.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T10:08:27.765Z,1528884507.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:28.142Z,1528884508.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:28.159Z,1528884508.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:08:28.160Z,1528884508.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:28.534Z,1528884508.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:28.552Z,1528884508.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:08:28.552Z,1528884508.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:28.930Z,1528884508.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:28.947Z,1528884508.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:08:28.948Z,1528884508.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:29.329Z,1528884509.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:29.352Z,1528884509.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:08:29.353Z,1528884509.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:29.728Z,1528884509.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:29.747Z,1528884509.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T10:08:29.748Z,1528884509.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:30.141Z,1528884510.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:30.159Z,1528884510.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:08:30.160Z,1528884510.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:30.541Z,1528884510.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:30.559Z,1528884510.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:08:30.560Z,1528884510.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:30.938Z,1528884510.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:30.956Z,1528884510.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T10:08:30.957Z,1528884510.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:31.331Z,1528884511.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:31.353Z,1528884511.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:08:31.354Z,1528884511.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:31.731Z,1528884511.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:31.763Z,1528884511.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:08:31.764Z,1528884511.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:32.130Z,1528884512.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:32.147Z,1528884512.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:08:32.148Z,1528884512.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:32.537Z,1528884512.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:32.554Z,1528884512.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:08:32.555Z,1528884512.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:32.931Z,1528884512.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:32.962Z,1528884512.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T10:08:32.963Z,1528884512.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:33.339Z,1528884513.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:33.356Z,1528884513.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:08:33.357Z,1528884513.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:33.741Z,1528884513.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:33.759Z,1528884513.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T10:08:33.760Z,1528884513.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:34.138Z,1528884514.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:34.156Z,1528884514.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:08:34.157Z,1528884514.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:34.535Z,1528884514.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:34.553Z,1528884514.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:34.931Z,1528884514.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:34.962Z,1528884514.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:35.334Z,1528884515.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:35.352Z,1528884515.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:35.730Z,1528884515.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:35.748Z,1528884515.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:36.139Z,1528884516.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:36.157Z,1528884516.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:36.542Z,1528884516.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:36.560Z,1528884516.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:36.939Z,1528884516.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:36.957Z,1528884516.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:37.331Z,1528884517.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:37.363Z,1528884517.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:37.736Z,1528884517.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:37.754Z,1528884517.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:38.130Z,1528884518.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:38.148Z,1528884518.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:38.532Z,1528884518.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:38.562Z,1528884518.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:38.934Z,1528884518.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:38.951Z,1528884518.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:39.344Z,1528884519.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:39.362Z,1528884519.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:39.744Z,1528884519.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:39.761Z,1528884519.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:40.142Z,1528884520.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:40.160Z,1528884520.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:40.523Z,1528884520.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:40.560Z,1528884520.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:40.933Z,1528884520.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:40.952Z,1528884520.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:41.324Z,1528884521.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:41.355Z,1528884521.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:41.723Z,1528884521.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:41.757Z,1528884521.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:42.144Z,1528884522.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:42.162Z,1528884522.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:42.547Z,1528884522.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:42.566Z,1528884522.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:42.943Z,1528884522.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:42.962Z,1528884522.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:43.327Z,1528884523.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:43.362Z,1528884523.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:43.723Z,1528884523.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:43.748Z,1528884523.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:44.124Z,1528884524.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:44.150Z,1528884524.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:44.528Z,1528884524.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:44.554Z,1528884524.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:44.923Z,1528884524.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:44.941Z,1528884524.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:45.337Z,1528884525.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:45.368Z,1528884525.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:45.745Z,1528884525.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:45.772Z,1528884525.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:46.142Z,1528884526.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:46.176Z,1528884526.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:46.527Z,1528884526.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:46.546Z,1528884526.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:46.929Z,1528884526.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:46.952Z,1528884526.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:47.330Z,1528884527.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:47.348Z,1528884527.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:47.730Z,1528884527.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:47.748Z,1528884527.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:48.142Z,1528884528.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:48.176Z,1528884528.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:48.537Z,1528884528.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:48.555Z,1528884528.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:48.937Z,1528884528.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:48.955Z,1528884528.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:49.330Z,1528884529.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:49.348Z,1528884529.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:49.729Z,1528884529.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:49.747Z,1528884529.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:50.129Z,1528884530.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:50.147Z,1528884530.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:50.530Z,1528884530.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:50.552Z,1528884530.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:50.928Z,1528884530.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:50.952Z,1528884530.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:51.341Z,1528884531.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:51.359Z,1528884531.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:51.742Z,1528884531.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:51.759Z,1528884531.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:52.137Z,1528884532.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:52.160Z,1528884532.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:52.533Z,1528884532.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:52.551Z,1528884532.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:52.931Z,1528884532.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:52.964Z,1528884532.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:53.333Z,1528884533.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:53.351Z,1528884533.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:53.730Z,1528884533.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:53.748Z,1528884533.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:54.141Z,1528884534.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:54.159Z,1528884534.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:54.541Z,1528884534.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:54.558Z,1528884534.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:57.653Z,1528884537.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:57.687Z,1528884537.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:57.695Z,1528884537.695 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T10:03:57.4Z
2018-06-13T10:08:57.695Z,1528884537.695 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T10:08:57.695Z,1528884537.695 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T10:08:57.811Z,1528884537.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:57.851Z,1528884537.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:58.951Z,1528884538.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:58.969Z,1528884538.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:59.107Z,1528884539.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:59.152Z,1528884539.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:59.533Z,1528884539.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:59.551Z,1528884539.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:08:59.921Z,1528884539.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:08:59.956Z,1528884539.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:00.322Z,1528884540.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:00.351Z,1528884540.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:00.711Z,1528884540.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:00.745Z,1528884540.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:01.110Z,1528884541.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:01.128Z,1528884541.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:04.251Z,1528884544.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:04.270Z,1528884544.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:04.353Z,1528884544.353 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0156.lzma
2018-06-13T10:09:04.374Z,1528884544.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:04.422Z,1528884544.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:04.796Z,1528884544.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:04.835Z,1528884544.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:05.154Z,1528884545.154 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0156.lzma.bak
2018-06-13T10:09:05.154Z,1528884545.154 [DataOverHttps](INFO): SBD MOMSN=8329030
2018-06-13T10:09:05.214Z,1528884545.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:05.254Z,1528884545.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:07.070Z,1528884547.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:07.087Z,1528884547.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:07.226Z,1528884547.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:07.256Z,1528884547.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:10.358Z,1528884550.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:10.375Z,1528884550.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:10.495Z,1528884550.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:10.532Z,1528884550.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:10.912Z,1528884550.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:10.930Z,1528884550.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:11.316Z,1528884551.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:11.340Z,1528884551.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:11.710Z,1528884551.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:11.740Z,1528884551.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:12.095Z,1528884552.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:12.123Z,1528884552.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:15.209Z,1528884555.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:15.226Z,1528884555.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:15.317Z,1528884555.317 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180613T032335/Express0157.lzma
2018-06-13T10:09:15.346Z,1528884555.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:15.372Z,1528884555.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:15.756Z,1528884555.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:15.773Z,1528884555.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:16.114Z,1528884556.114 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0157.lzma.bak
2018-06-13T10:09:16.114Z,1528884556.114 [DataOverHttps](INFO): SBD MOMSN=8329032
2018-06-13T10:09:16.154Z,1528884556.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:16.188Z,1528884556.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:18.037Z,1528884558.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:18.070Z,1528884558.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:18.074Z,1528884558.074 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T10:09:18.074Z,1528884558.074 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T10:09:18.074Z,1528884558.074 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T10:09:18.187Z,1528884558.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:18.222Z,1528884558.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:18.586Z,1528884558.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:18.629Z,1528884558.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:21.698Z,1528884561.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:21.732Z,1528884561.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:21.847Z,1528884561.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:21.884Z,1528884561.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:22.269Z,1528884562.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:22.292Z,1528884562.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:22.667Z,1528884562.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:22.684Z,1528884562.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:23.053Z,1528884563.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:23.087Z,1528884563.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:23.447Z,1528884563.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:23.480Z,1528884563.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:23.847Z,1528884563.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:23.879Z,1528884563.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:24.247Z,1528884564.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:24.279Z,1528884564.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:24.643Z,1528884564.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:24.681Z,1528884564.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:25.064Z,1528884565.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:25.082Z,1528884565.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:25.464Z,1528884565.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:25.482Z,1528884565.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:25.868Z,1528884565.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:25.892Z,1528884565.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:26.248Z,1528884566.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:26.284Z,1528884566.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:26.647Z,1528884566.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:26.684Z,1528884566.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:27.068Z,1528884567.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:27.086Z,1528884567.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:27.467Z,1528884567.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:27.486Z,1528884567.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:27.863Z,1528884567.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:27.881Z,1528884567.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:28.244Z,1528884568.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:28.274Z,1528884568.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:28.640Z,1528884568.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:28.658Z,1528884568.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:29.047Z,1528884569.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:29.064Z,1528884569.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:29.457Z,1528884569.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:29.494Z,1528884569.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:29.853Z,1528884569.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:29.887Z,1528884569.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:30.266Z,1528884570.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:30.292Z,1528884570.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:30.643Z,1528884570.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:30.668Z,1528884570.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:31.044Z,1528884571.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:31.062Z,1528884571.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:31.449Z,1528884571.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:31.467Z,1528884571.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:31.848Z,1528884571.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:31.872Z,1528884571.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:32.258Z,1528884572.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:32.295Z,1528884572.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:32.662Z,1528884572.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:32.700Z,1528884572.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:33.063Z,1528884573.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:33.080Z,1528884573.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:33.446Z,1528884573.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:33.464Z,1528884573.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:33.852Z,1528884573.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:33.871Z,1528884573.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:34.247Z,1528884574.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:34.281Z,1528884574.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:34.643Z,1528884574.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:34.676Z,1528884574.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:35.052Z,1528884575.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:35.072Z,1528884575.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:35.461Z,1528884575.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:35.480Z,1528884575.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:35.861Z,1528884575.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:35.879Z,1528884575.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:36.258Z,1528884576.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:36.275Z,1528884576.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:36.654Z,1528884576.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:36.672Z,1528884576.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:37.049Z,1528884577.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:37.067Z,1528884577.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:37.454Z,1528884577.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:37.471Z,1528884577.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:37.856Z,1528884577.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:37.874Z,1528884577.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:38.258Z,1528884578.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:38.276Z,1528884578.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:38.661Z,1528884578.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:38.679Z,1528884578.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:39.061Z,1528884579.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:39.079Z,1528884579.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:39.446Z,1528884579.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:39.463Z,1528884579.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:39.853Z,1528884579.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:39.871Z,1528884579.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:40.254Z,1528884580.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:40.272Z,1528884580.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:40.643Z,1528884580.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:40.667Z,1528884580.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:41.053Z,1528884581.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:41.076Z,1528884581.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:41.462Z,1528884581.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:41.547Z,1528884581.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:41.856Z,1528884581.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:41.903Z,1528884581.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:42.258Z,1528884582.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:42.411Z,1528884582.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:42.644Z,1528884582.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:42.714Z,1528884582.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:43.043Z,1528884583.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:43.141Z,1528884583.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:43.444Z,1528884583.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:43.472Z,1528884583.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:43.842Z,1528884583.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:43.879Z,1528884583.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:44.259Z,1528884584.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:44.277Z,1528884584.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:44.667Z,1528884584.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:44.685Z,1528884584.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:45.063Z,1528884585.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:45.080Z,1528884585.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:45.443Z,1528884585.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:45.470Z,1528884585.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:45.839Z,1528884585.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:45.875Z,1528884585.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:46.243Z,1528884586.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:46.271Z,1528884586.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:46.639Z,1528884586.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:46.676Z,1528884586.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:47.043Z,1528884587.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:47.084Z,1528884587.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:47.460Z,1528884587.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:47.478Z,1528884587.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:47.861Z,1528884587.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:48.083Z,1528884588.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:48.263Z,1528884588.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:48.281Z,1528884588.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:48.643Z,1528884588.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:48.687Z,1528884588.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:49.043Z,1528884589.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:49.070Z,1528884589.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:49.444Z,1528884589.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:49.479Z,1528884589.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:49.843Z,1528884589.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:49.878Z,1528884589.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:50.263Z,1528884590.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:50.281Z,1528884590.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:50.662Z,1528884590.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:50.679Z,1528884590.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:51.062Z,1528884591.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:51.091Z,1528884591.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:51.439Z,1528884591.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:51.466Z,1528884591.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:51.843Z,1528884591.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:51.876Z,1528884591.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:52.243Z,1528884592.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:52.269Z,1528884592.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:52.644Z,1528884592.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:52.661Z,1528884592.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:53.047Z,1528884593.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:53.064Z,1528884593.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:53.458Z,1528884593.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:53.491Z,1528884593.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:53.861Z,1528884593.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:53.895Z,1528884593.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:54.253Z,1528884594.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:54.279Z,1528884594.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:54.646Z,1528884594.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:54.672Z,1528884594.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:55.046Z,1528884595.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:55.064Z,1528884595.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:55.447Z,1528884595.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:55.472Z,1528884595.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:55.845Z,1528884595.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:55.868Z,1528884595.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:56.250Z,1528884596.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:56.268Z,1528884596.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:56.657Z,1528884596.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:56.675Z,1528884596.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:57.058Z,1528884597.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:57.075Z,1528884597.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:57.449Z,1528884597.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:57.467Z,1528884597.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:57.848Z,1528884597.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:57.866Z,1528884597.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:58.250Z,1528884598.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:58.269Z,1528884598.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:58.646Z,1528884598.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:58.663Z,1528884598.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:59.048Z,1528884599.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:59.066Z,1528884599.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:59.457Z,1528884599.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:59.475Z,1528884599.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:09:59.857Z,1528884599.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:09:59.875Z,1528884599.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:00.253Z,1528884600.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:00.272Z,1528884600.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:00.650Z,1528884600.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:00.668Z,1528884600.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:01.046Z,1528884601.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:01.064Z,1528884601.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:01.448Z,1528884601.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:01.476Z,1528884601.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:01.847Z,1528884601.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:01.880Z,1528884601.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:02.254Z,1528884602.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:02.276Z,1528884602.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:02.657Z,1528884602.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:02.675Z,1528884602.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:03.058Z,1528884603.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:03.076Z,1528884603.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:03.443Z,1528884603.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:03.466Z,1528884603.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:03.847Z,1528884603.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:03.878Z,1528884603.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:04.250Z,1528884604.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:04.267Z,1528884604.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:04.650Z,1528884604.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:04.668Z,1528884604.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:05.047Z,1528884605.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:05.079Z,1528884605.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:05.458Z,1528884605.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:05.476Z,1528884605.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:05.854Z,1528884605.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:05.883Z,1528884605.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:06.255Z,1528884606.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:06.273Z,1528884606.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:06.650Z,1528884606.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:06.680Z,1528884606.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:07.051Z,1528884607.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:07.069Z,1528884607.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:07.455Z,1528884607.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:07.473Z,1528884607.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:07.850Z,1528884607.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:07.883Z,1528884607.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:08.260Z,1528884608.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:08.278Z,1528884608.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:08.661Z,1528884608.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:08.679Z,1528884608.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:09.058Z,1528884609.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:09.100Z,1528884609.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:09.452Z,1528884609.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:09.470Z,1528884609.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:09.847Z,1528884609.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:09.878Z,1528884609.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:10.244Z,1528884610.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:10.275Z,1528884610.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:10.644Z,1528884610.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:10.675Z,1528884610.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:11.043Z,1528884611.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:11.077Z,1528884611.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:11.466Z,1528884611.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:11.484Z,1528884611.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:11.866Z,1528884611.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:11.892Z,1528884611.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:12.260Z,1528884612.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:12.278Z,1528884612.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:12.644Z,1528884612.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:12.685Z,1528884612.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:13.043Z,1528884613.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:13.085Z,1528884613.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:13.444Z,1528884613.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:13.481Z,1528884613.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:13.843Z,1528884613.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:13.869Z,1528884613.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:14.253Z,1528884614.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:14.294Z,1528884614.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:14.658Z,1528884614.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:14.686Z,1528884614.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:15.057Z,1528884615.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:15.087Z,1528884615.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:15.443Z,1528884615.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:15.461Z,1528884615.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:15.847Z,1528884615.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:15.865Z,1528884615.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:16.246Z,1528884616.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:16.268Z,1528884616.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:16.647Z,1528884616.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:16.673Z,1528884616.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:17.048Z,1528884617.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:17.066Z,1528884617.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:17.457Z,1528884617.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:17.475Z,1528884617.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:17.853Z,1528884617.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:17.871Z,1528884617.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:18.261Z,1528884618.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:18.279Z,1528884618.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:18.654Z,1528884618.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:18.672Z,1528884618.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:19.053Z,1528884619.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:19.071Z,1528884619.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:19.451Z,1528884619.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:19.469Z,1528884619.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:19.854Z,1528884619.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:19.872Z,1528884619.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:22.974Z,1528884622.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:23.008Z,1528884623.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:23.139Z,1528884623.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:23.173Z,1528884623.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:23.525Z,1528884623.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:23.556Z,1528884623.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:23.914Z,1528884623.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:23.932Z,1528884623.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:24.315Z,1528884624.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:24.336Z,1528884624.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:24.714Z,1528884624.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:24.732Z,1528884624.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:25.110Z,1528884625.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:25.128Z,1528884625.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:25.525Z,1528884625.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:25.562Z,1528884625.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:25.925Z,1528884625.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:25.963Z,1528884625.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:26.325Z,1528884626.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:26.361Z,1528884626.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:26.714Z,1528884626.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:26.732Z,1528884626.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:27.114Z,1528884627.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:27.132Z,1528884627.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:27.510Z,1528884627.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:27.536Z,1528884627.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:27.914Z,1528884627.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:27.932Z,1528884627.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:28.325Z,1528884628.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:28.363Z,1528884628.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:28.726Z,1528884628.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:28.762Z,1528884628.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:29.126Z,1528884629.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:29.161Z,1528884629.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:29.514Z,1528884629.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:29.532Z,1528884629.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:29.910Z,1528884629.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:29.927Z,1528884629.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:30.315Z,1528884630.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:30.336Z,1528884630.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:30.714Z,1528884630.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:30.732Z,1528884630.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:31.110Z,1528884631.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:31.128Z,1528884631.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:31.525Z,1528884631.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:31.562Z,1528884631.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:31.925Z,1528884631.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:31.963Z,1528884631.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:32.326Z,1528884632.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:32.361Z,1528884632.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:32.714Z,1528884632.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:32.732Z,1528884632.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:33.113Z,1528884633.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:33.135Z,1528884633.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:33.510Z,1528884633.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:33.532Z,1528884633.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:33.914Z,1528884633.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:33.932Z,1528884633.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:34.326Z,1528884634.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:34.364Z,1528884634.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:34.725Z,1528884634.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:34.764Z,1528884634.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:35.122Z,1528884635.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:35.139Z,1528884635.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:35.517Z,1528884635.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:35.535Z,1528884635.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:35.913Z,1528884635.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:35.931Z,1528884635.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:36.316Z,1528884636.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:36.334Z,1528884636.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:36.716Z,1528884636.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:36.746Z,1528884636.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:37.112Z,1528884637.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:37.144Z,1528884637.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:37.526Z,1528884637.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:37.548Z,1528884637.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:37.927Z,1528884637.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:37.952Z,1528884637.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:38.327Z,1528884638.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:38.352Z,1528884638.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:38.715Z,1528884638.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:38.749Z,1528884638.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:39.118Z,1528884639.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:39.137Z,1528884639.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:39.508Z,1528884639.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:39.543Z,1528884639.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:39.914Z,1528884639.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:39.938Z,1528884639.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:40.331Z,1528884640.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:40.350Z,1528884640.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:40.727Z,1528884640.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:40.745Z,1528884640.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:41.126Z,1528884641.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:41.145Z,1528884641.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:41.518Z,1528884641.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:41.536Z,1528884641.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:41.907Z,1528884641.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:41.942Z,1528884641.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:42.311Z,1528884642.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:42.347Z,1528884642.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:42.712Z,1528884642.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:42.744Z,1528884642.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:43.111Z,1528884643.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:43.138Z,1528884643.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:43.527Z,1528884643.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:43.545Z,1528884643.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:43.933Z,1528884643.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:43.951Z,1528884643.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:44.323Z,1528884644.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:44.341Z,1528884644.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:44.707Z,1528884644.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:44.744Z,1528884644.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:45.111Z,1528884645.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:45.150Z,1528884645.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:45.512Z,1528884645.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:45.543Z,1528884645.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:45.911Z,1528884645.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:45.944Z,1528884645.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:46.331Z,1528884646.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:46.366Z,1528884646.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:46.732Z,1528884646.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:46.750Z,1528884646.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:47.121Z,1528884647.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:47.157Z,1528884647.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:47.511Z,1528884647.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:47.542Z,1528884647.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:47.911Z,1528884647.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:47.945Z,1528884647.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:48.311Z,1528884648.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:48.356Z,1528884648.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:48.716Z,1528884648.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:48.735Z,1528884648.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:49.114Z,1528884649.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:49.132Z,1528884649.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:49.525Z,1528884649.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:49.559Z,1528884649.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:49.925Z,1528884649.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:49.943Z,1528884649.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:50.322Z,1528884650.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:50.340Z,1528884650.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:50.716Z,1528884650.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:50.735Z,1528884650.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:51.118Z,1528884651.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:51.135Z,1528884651.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:51.514Z,1528884651.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:51.532Z,1528884651.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:51.919Z,1528884651.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:51.937Z,1528884651.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:52.325Z,1528884652.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:52.344Z,1528884652.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:52.721Z,1528884652.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:52.739Z,1528884652.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:53.122Z,1528884653.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:53.140Z,1528884653.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:53.518Z,1528884653.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:53.559Z,1528884653.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:53.911Z,1528884653.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:53.944Z,1528884653.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:54.318Z,1528884654.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:54.336Z,1528884654.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:54.719Z,1528884654.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:54.738Z,1528884654.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:55.118Z,1528884655.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:55.136Z,1528884655.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:55.529Z,1528884655.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:55.547Z,1528884655.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:55.927Z,1528884655.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:55.946Z,1528884655.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:56.328Z,1528884656.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:56.352Z,1528884656.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:56.718Z,1528884656.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:56.744Z,1528884656.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:57.118Z,1528884657.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:57.136Z,1528884657.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:57.511Z,1528884657.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:57.541Z,1528884657.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:57.915Z,1528884657.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:57.940Z,1528884657.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:58.328Z,1528884658.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:58.346Z,1528884658.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:58.726Z,1528884658.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:58.744Z,1528884658.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:59.126Z,1528884659.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:59.144Z,1528884659.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:59.514Z,1528884659.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:59.531Z,1528884659.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:10:59.911Z,1528884659.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:10:59.934Z,1528884659.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:00.318Z,1528884660.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:00.335Z,1528884660.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:00.718Z,1528884660.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:00.735Z,1528884660.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:01.111Z,1528884661.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:01.134Z,1528884661.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:01.526Z,1528884661.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:01.544Z,1528884661.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:01.926Z,1528884661.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:01.944Z,1528884661.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:02.326Z,1528884662.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:02.344Z,1528884662.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:02.715Z,1528884662.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:02.737Z,1528884662.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:03.119Z,1528884663.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:03.136Z,1528884663.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:03.511Z,1528884663.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:03.535Z,1528884663.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:03.915Z,1528884663.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:03.945Z,1528884663.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:04.327Z,1528884664.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:04.345Z,1528884664.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:04.727Z,1528884664.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:04.745Z,1528884664.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:05.128Z,1528884665.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:05.146Z,1528884665.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:05.507Z,1528884665.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:05.535Z,1528884665.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:05.907Z,1528884665.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:05.944Z,1528884665.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:06.307Z,1528884666.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:06.343Z,1528884666.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:06.707Z,1528884666.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:06.735Z,1528884666.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:07.107Z,1528884667.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:07.143Z,1528884667.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:07.527Z,1528884667.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:07.545Z,1528884667.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:07.931Z,1528884667.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:07.949Z,1528884667.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:08.327Z,1528884668.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:08.352Z,1528884668.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:08.716Z,1528884668.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:08.734Z,1528884668.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:09.117Z,1528884669.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:09.135Z,1528884669.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:09.508Z,1528884669.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:09.543Z,1528884669.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:09.915Z,1528884669.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:09.940Z,1528884669.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:10.327Z,1528884670.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:10.345Z,1528884670.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:10.731Z,1528884670.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:10.749Z,1528884670.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:11.127Z,1528884671.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:11.145Z,1528884671.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:11.507Z,1528884671.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:11.535Z,1528884671.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:11.911Z,1528884671.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:11.944Z,1528884671.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:12.311Z,1528884672.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:12.347Z,1528884672.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:12.711Z,1528884672.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:12.740Z,1528884672.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:13.111Z,1528884673.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:13.148Z,1528884673.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:13.521Z,1528884673.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:13.548Z,1528884673.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:13.932Z,1528884673.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:13.951Z,1528884673.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:14.321Z,1528884674.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:14.356Z,1528884674.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:14.711Z,1528884674.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:14.741Z,1528884674.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:15.111Z,1528884675.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:15.128Z,1528884675.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:15.512Z,1528884675.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:15.545Z,1528884675.545 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:15.545Z,1528884675.545 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 135
2018-06-13T10:11:15.545Z,1528884675.546 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:11:15.547Z,1528884675.547 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:15.547Z,1528884675.547 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 135
2018-06-13T10:11:15.547Z,1528884675.547 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:11:15.553Z,1528884675.553 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:15.553Z,1528884675.553 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 135
2018-06-13T10:11:15.554Z,1528884675.554 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:11:15.641Z,1528884675.641 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:11:15.641Z,1528884675.641 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:11:15.641Z,1528884675.641 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:11:15.915Z,1528884675.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:16.021Z,1528884676.021 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:11:16.021Z,1528884676.021 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 135
2018-06-13T10:11:16.022Z,1528884676.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:11:16.022Z,1528884676.022 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 135
2018-06-13T10:11:16.022Z,1528884676.022 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:11:16.022Z,1528884676.022 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 135
2018-06-13T10:11:16.325Z,1528884676.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:16.358Z,1528884676.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:11:16.358Z,1528884676.358 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:11:16.359Z,1528884676.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:11:16.359Z,1528884676.359 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:11:16.359Z,1528884676.359 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:11:16.360Z,1528884676.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:11:16.360Z,1528884676.360 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:11:16.360Z,1528884676.360 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:11:16.361Z,1528884676.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:11:16.722Z,1528884676.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:16.739Z,1528884676.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:11:16.740Z,1528884676.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:17.122Z,1528884677.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:17.139Z,1528884677.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:11:17.140Z,1528884677.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:17.516Z,1528884677.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:17.534Z,1528884677.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:11:17.534Z,1528884677.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:17.915Z,1528884677.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:17.932Z,1528884677.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:11:17.933Z,1528884677.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:18.318Z,1528884678.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:18.335Z,1528884678.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:11:18.336Z,1528884678.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:18.717Z,1528884678.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:18.740Z,1528884678.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:11:18.741Z,1528884678.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:21.818Z,1528884681.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:21.841Z,1528884681.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T10:11:21.842Z,1528884681.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:21.970Z,1528884681.970 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T10:11:21.970Z,1528884681.970 [NAL9602] Data Fault, FailCount= 2
2018-06-13T10:11:21.970Z,1528884681.970 [NAL9602](ERROR): Data Fault
2018-06-13T10:11:21.987Z,1528884681.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:22.039Z,1528884682.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T10:11:22.040Z,1528884682.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:22.129Z,1528884682.129 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T10:11:22.366Z,1528884682.366 [NAL9602](INFO): Powering down
2018-06-13T10:11:22.384Z,1528884682.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:22.430Z,1528884682.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T10:11:22.431Z,1528884682.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:22.788Z,1528884682.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:22.818Z,1528884682.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T10:11:22.819Z,1528884682.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:23.183Z,1528884683.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:23.218Z,1528884683.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T10:11:23.219Z,1528884683.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:23.293Z,1528884683.293 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T10:11:23.293Z,1528884683.293 [NAL9602] No Fault, FailCount= 2
2018-06-13T10:11:23.578Z,1528884683.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:23.595Z,1528884683.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T10:11:23.596Z,1528884683.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:23.981Z,1528884683.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:24.020Z,1528884684.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T10:11:24.025Z,1528884684.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:24.378Z,1528884684.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:24.395Z,1528884684.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T10:11:24.396Z,1528884684.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:24.782Z,1528884684.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:24.800Z,1528884684.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T10:11:24.801Z,1528884684.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:25.186Z,1528884685.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:25.204Z,1528884685.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T10:11:25.205Z,1528884685.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:25.586Z,1528884685.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:25.603Z,1528884685.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T10:11:25.604Z,1528884685.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:25.985Z,1528884685.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:26.002Z,1528884686.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T10:11:26.003Z,1528884686.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:26.386Z,1528884686.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:26.403Z,1528884686.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T10:11:26.404Z,1528884686.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:26.784Z,1528884686.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:26.808Z,1528884686.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T10:11:26.809Z,1528884686.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:27.181Z,1528884687.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:27.198Z,1528884687.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T10:11:27.199Z,1528884687.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:27.587Z,1528884687.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:27.604Z,1528884687.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T10:11:27.605Z,1528884687.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:27.986Z,1528884687.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:28.003Z,1528884688.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T10:11:28.004Z,1528884688.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:28.383Z,1528884688.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:28.400Z,1528884688.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T10:11:28.401Z,1528884688.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:28.786Z,1528884688.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:28.803Z,1528884688.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T10:11:28.804Z,1528884688.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:29.188Z,1528884689.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:29.205Z,1528884689.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T10:11:29.206Z,1528884689.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:29.585Z,1528884689.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:29.602Z,1528884689.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T10:11:29.603Z,1528884689.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:29.988Z,1528884689.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:30.006Z,1528884690.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T10:11:30.007Z,1528884690.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:30.389Z,1528884690.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:30.406Z,1528884690.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T10:11:30.407Z,1528884690.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:30.784Z,1528884690.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:30.801Z,1528884690.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T10:11:30.802Z,1528884690.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:31.188Z,1528884691.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:31.206Z,1528884691.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T10:11:31.207Z,1528884691.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:31.588Z,1528884691.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:31.607Z,1528884691.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T10:11:31.607Z,1528884691.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:31.984Z,1528884691.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:32.001Z,1528884692.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T10:11:32.002Z,1528884692.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:32.388Z,1528884692.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:32.406Z,1528884692.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T10:11:32.407Z,1528884692.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:32.788Z,1528884692.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:32.806Z,1528884692.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T10:11:32.807Z,1528884692.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:33.188Z,1528884693.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:33.213Z,1528884693.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T10:11:33.214Z,1528884693.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:33.588Z,1528884693.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:33.606Z,1528884693.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T10:11:33.607Z,1528884693.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:33.988Z,1528884693.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:34.006Z,1528884694.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T10:11:34.007Z,1528884694.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:34.385Z,1528884694.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:34.402Z,1528884694.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T10:11:34.403Z,1528884694.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:34.788Z,1528884694.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:34.806Z,1528884694.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T10:11:34.807Z,1528884694.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:35.188Z,1528884695.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:35.206Z,1528884695.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T10:11:35.207Z,1528884695.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:35.584Z,1528884695.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:35.602Z,1528884695.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:35.988Z,1528884695.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:36.006Z,1528884696.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:36.390Z,1528884696.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:36.408Z,1528884696.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:36.785Z,1528884696.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:36.803Z,1528884696.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:37.188Z,1528884697.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:37.206Z,1528884697.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:37.588Z,1528884697.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:37.606Z,1528884697.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:37.989Z,1528884697.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:38.006Z,1528884698.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:38.387Z,1528884698.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:38.411Z,1528884698.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:38.789Z,1528884698.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:38.807Z,1528884698.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:39.186Z,1528884699.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:39.203Z,1528884699.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:39.584Z,1528884699.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:39.603Z,1528884699.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:39.991Z,1528884699.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:40.008Z,1528884700.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:40.389Z,1528884700.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:40.407Z,1528884700.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:40.785Z,1528884700.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:40.803Z,1528884700.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:41.190Z,1528884701.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:41.208Z,1528884701.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:41.584Z,1528884701.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:41.602Z,1528884701.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:41.988Z,1528884701.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:42.007Z,1528884702.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:42.388Z,1528884702.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:42.407Z,1528884702.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:42.787Z,1528884702.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:42.806Z,1528884702.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:43.184Z,1528884703.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:43.204Z,1528884703.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:43.588Z,1528884703.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:43.606Z,1528884703.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:43.989Z,1528884703.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:44.007Z,1528884704.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:44.388Z,1528884704.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:44.406Z,1528884704.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:44.788Z,1528884704.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:44.805Z,1528884704.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:45.187Z,1528884705.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:45.205Z,1528884705.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:45.584Z,1528884705.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:45.602Z,1528884705.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:45.989Z,1528884705.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:46.007Z,1528884706.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:46.387Z,1528884706.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:46.405Z,1528884706.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:46.784Z,1528884706.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:46.802Z,1528884706.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:47.188Z,1528884707.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:47.206Z,1528884707.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:47.587Z,1528884707.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:47.604Z,1528884707.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:47.984Z,1528884707.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:48.003Z,1528884708.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:48.388Z,1528884708.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:48.406Z,1528884708.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:48.788Z,1528884708.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:48.805Z,1528884708.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:49.184Z,1528884709.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:49.202Z,1528884709.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:49.590Z,1528884709.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:49.607Z,1528884709.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:49.987Z,1528884709.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:50.005Z,1528884710.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:50.388Z,1528884710.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:50.406Z,1528884710.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:50.790Z,1528884710.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:50.808Z,1528884710.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:51.187Z,1528884711.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:51.205Z,1528884711.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:51.584Z,1528884711.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:51.602Z,1528884711.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:51.988Z,1528884711.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:52.006Z,1528884712.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:52.387Z,1528884712.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:52.404Z,1528884712.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:52.766Z,1528884712.766 [NAL9602](INFO): Powering up NAL9602
2018-06-13T10:11:52.794Z,1528884712.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:52.811Z,1528884712.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:53.182Z,1528884713.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:53.212Z,1528884713.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:53.588Z,1528884713.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:53.605Z,1528884713.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:53.988Z,1528884713.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:54.006Z,1528884714.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:54.388Z,1528884714.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:54.406Z,1528884714.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:54.787Z,1528884714.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:54.805Z,1528884714.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:55.184Z,1528884715.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:55.202Z,1528884715.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:55.590Z,1528884715.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:55.608Z,1528884715.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:55.987Z,1528884715.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:56.005Z,1528884716.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:56.388Z,1528884716.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:56.406Z,1528884716.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:56.788Z,1528884716.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:56.806Z,1528884716.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:57.188Z,1528884717.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:57.205Z,1528884717.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:57.585Z,1528884717.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:57.603Z,1528884717.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:57.988Z,1528884717.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:58.005Z,1528884718.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:58.384Z,1528884718.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:58.402Z,1528884718.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:58.785Z,1528884718.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:58.802Z,1528884718.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:59.186Z,1528884719.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:59.215Z,1528884719.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:59.587Z,1528884719.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:11:59.606Z,1528884719.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:11:59.988Z,1528884719.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:00.006Z,1528884720.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:00.388Z,1528884720.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:00.406Z,1528884720.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:00.787Z,1528884720.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:00.805Z,1528884720.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:01.184Z,1528884721.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:01.202Z,1528884721.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:01.588Z,1528884721.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:01.605Z,1528884721.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:01.987Z,1528884721.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:02.005Z,1528884722.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:02.388Z,1528884722.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:02.406Z,1528884722.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:02.788Z,1528884722.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:02.806Z,1528884722.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:03.188Z,1528884723.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:03.205Z,1528884723.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:03.590Z,1528884723.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:03.608Z,1528884723.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:03.966Z,1528884723.966 [NAL9602](INFO): NAL9602 initialized
2018-06-13T10:12:03.988Z,1528884723.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:04.018Z,1528884724.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:04.389Z,1528884724.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:04.407Z,1528884724.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:04.795Z,1528884724.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:04.812Z,1528884724.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:05.197Z,1528884725.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:05.215Z,1528884725.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:05.594Z,1528884725.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:05.616Z,1528884725.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:05.986Z,1528884725.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:06.003Z,1528884726.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:06.388Z,1528884726.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:06.414Z,1528884726.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:06.790Z,1528884726.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:06.807Z,1528884726.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:07.186Z,1528884727.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:07.204Z,1528884727.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:07.594Z,1528884727.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:07.616Z,1528884727.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:08.001Z,1528884728.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:08.019Z,1528884728.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:08.397Z,1528884728.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:08.416Z,1528884728.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:08.787Z,1528884728.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:08.818Z,1528884728.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:09.187Z,1528884729.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:09.219Z,1528884729.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:09.590Z,1528884729.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:09.608Z,1528884729.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:09.990Z,1528884729.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:10.007Z,1528884730.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:10.388Z,1528884730.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:10.406Z,1528884730.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:10.799Z,1528884730.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:10.817Z,1528884730.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:11.203Z,1528884731.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:11.220Z,1528884731.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:11.598Z,1528884731.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:11.616Z,1528884731.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:11.979Z,1528884731.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:12.016Z,1528884732.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:12.388Z,1528884732.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:12.406Z,1528884732.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:12.789Z,1528884732.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:12.807Z,1528884732.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:13.179Z,1528884733.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:13.210Z,1528884733.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:13.603Z,1528884733.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:13.621Z,1528884733.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:14.004Z,1528884734.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:14.022Z,1528884734.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:14.404Z,1528884734.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:14.422Z,1528884734.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:14.783Z,1528884734.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:14.815Z,1528884734.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:15.179Z,1528884735.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:15.220Z,1528884735.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:15.583Z,1528884735.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:15.618Z,1528884735.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:15.985Z,1528884735.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:16.020Z,1528884736.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:16.383Z,1528884736.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:16.420Z,1528884736.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:16.802Z,1528884736.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:16.824Z,1528884736.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:17.202Z,1528884737.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:17.234Z,1528884737.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:17.598Z,1528884737.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:17.623Z,1528884737.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:17.980Z,1528884737.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:18.011Z,1528884738.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:18.387Z,1528884738.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:18.420Z,1528884738.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:18.789Z,1528884738.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:18.818Z,1528884738.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:21.914Z,1528884741.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:21.933Z,1528884741.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:22.068Z,1528884742.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:22.111Z,1528884742.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:22.467Z,1528884742.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:22.484Z,1528884742.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:22.866Z,1528884742.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:22.884Z,1528884742.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:23.254Z,1528884743.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:23.272Z,1528884743.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:23.644Z,1528884743.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:23.674Z,1528884743.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:24.040Z,1528884744.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:24.075Z,1528884744.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:24.458Z,1528884744.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:24.488Z,1528884744.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:24.863Z,1528884744.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:24.896Z,1528884744.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:25.254Z,1528884745.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:25.293Z,1528884745.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:25.644Z,1528884745.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:25.678Z,1528884745.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:26.043Z,1528884746.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:26.061Z,1528884746.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:26.457Z,1528884746.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:26.492Z,1528884746.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:26.858Z,1528884746.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:26.896Z,1528884746.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:27.257Z,1528884747.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:27.300Z,1528884747.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:27.650Z,1528884747.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:27.669Z,1528884747.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:28.048Z,1528884748.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:28.073Z,1528884748.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:28.454Z,1528884748.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:28.472Z,1528884748.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:28.854Z,1528884748.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:28.872Z,1528884748.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:29.254Z,1528884749.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:29.271Z,1528884749.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:29.649Z,1528884749.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:29.667Z,1528884749.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:30.046Z,1528884750.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:30.063Z,1528884750.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:30.454Z,1528884750.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:30.471Z,1528884750.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:30.857Z,1528884750.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:30.876Z,1528884750.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:31.255Z,1528884751.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:31.272Z,1528884751.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:31.653Z,1528884751.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:31.671Z,1528884751.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:32.047Z,1528884752.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:32.079Z,1528884752.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:32.455Z,1528884752.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:32.472Z,1528884752.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:32.858Z,1528884752.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:32.875Z,1528884752.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:33.254Z,1528884753.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:33.276Z,1528884753.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:33.650Z,1528884753.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:33.672Z,1528884753.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:34.042Z,1528884754.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:34.072Z,1528884754.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:34.458Z,1528884754.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:34.476Z,1528884754.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:34.858Z,1528884754.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:34.876Z,1528884754.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:35.258Z,1528884755.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:35.276Z,1528884755.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:35.647Z,1528884755.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:35.682Z,1528884755.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:36.039Z,1528884756.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:36.077Z,1528884756.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:36.458Z,1528884756.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:36.481Z,1528884756.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:36.863Z,1528884756.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:36.881Z,1528884756.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:37.263Z,1528884757.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:37.281Z,1528884757.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:37.639Z,1528884757.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:37.677Z,1528884757.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:38.044Z,1528884758.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:38.074Z,1528884758.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:38.440Z,1528884758.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:38.458Z,1528884758.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:38.854Z,1528884758.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:38.887Z,1528884758.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:39.258Z,1528884759.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:39.285Z,1528884759.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:39.653Z,1528884759.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:39.688Z,1528884759.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:40.043Z,1528884760.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:40.084Z,1528884760.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:40.448Z,1528884760.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:40.488Z,1528884760.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:40.846Z,1528884760.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:40.864Z,1528884760.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:41.246Z,1528884761.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:41.264Z,1528884761.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:41.658Z,1528884761.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:41.692Z,1528884761.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:42.057Z,1528884762.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:42.075Z,1528884762.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:42.455Z,1528884762.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:42.472Z,1528884762.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:42.848Z,1528884762.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:42.866Z,1528884762.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:43.246Z,1528884763.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:43.264Z,1528884763.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:43.648Z,1528884763.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:43.672Z,1528884763.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:44.048Z,1528884764.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:44.066Z,1528884764.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:44.446Z,1528884764.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:44.463Z,1528884764.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:44.858Z,1528884764.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:44.875Z,1528884764.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:45.258Z,1528884765.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:45.275Z,1528884765.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:45.653Z,1528884765.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:45.676Z,1528884765.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:46.048Z,1528884766.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:46.066Z,1528884766.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:46.447Z,1528884766.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:46.541Z,1528884766.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:46.850Z,1528884766.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:46.867Z,1528884766.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:47.249Z,1528884767.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:47.267Z,1528884767.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:47.654Z,1528884767.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:47.672Z,1528884767.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:48.053Z,1528884768.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:48.071Z,1528884768.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:48.454Z,1528884768.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:48.471Z,1528884768.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:48.842Z,1528884768.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:48.872Z,1528884768.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:49.246Z,1528884769.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:49.265Z,1528884769.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:49.647Z,1528884769.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:49.678Z,1528884769.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:50.047Z,1528884770.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:50.081Z,1528884770.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:50.439Z,1528884770.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:50.473Z,1528884770.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:50.859Z,1528884770.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:50.877Z,1528884770.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:51.263Z,1528884771.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:51.282Z,1528884771.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:51.659Z,1528884771.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:51.677Z,1528884771.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:52.043Z,1528884772.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:52.078Z,1528884772.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:52.443Z,1528884772.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:52.471Z,1528884772.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:52.839Z,1528884772.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:52.872Z,1528884772.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:53.240Z,1528884773.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:53.331Z,1528884773.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:53.659Z,1528884773.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:53.684Z,1528884773.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:54.061Z,1528884774.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:54.079Z,1528884774.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:54.463Z,1528884774.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:54.481Z,1528884774.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:54.843Z,1528884774.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:54.879Z,1528884774.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:55.239Z,1528884775.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:55.276Z,1528884775.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:55.639Z,1528884775.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:55.675Z,1528884775.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:56.043Z,1528884776.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:56.073Z,1528884776.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:56.439Z,1528884776.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:56.473Z,1528884776.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:56.863Z,1528884776.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:56.881Z,1528884776.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:57.262Z,1528884777.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:57.280Z,1528884777.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:57.660Z,1528884777.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:57.678Z,1528884777.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:58.043Z,1528884778.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:58.079Z,1528884778.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:58.443Z,1528884778.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:58.480Z,1528884778.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:58.840Z,1528884778.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:58.874Z,1528884778.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:59.243Z,1528884779.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:59.291Z,1528884779.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:12:59.653Z,1528884779.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:12:59.681Z,1528884779.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:00.069Z,1528884780.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:00.087Z,1528884780.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:00.457Z,1528884780.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:00.493Z,1528884780.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:00.843Z,1528884780.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:00.870Z,1528884780.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:01.243Z,1528884781.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:01.262Z,1528884781.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:01.647Z,1528884781.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:01.666Z,1528884781.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:02.047Z,1528884782.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:02.068Z,1528884782.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:02.442Z,1528884782.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:02.460Z,1528884782.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:02.858Z,1528884782.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:02.895Z,1528884782.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:03.262Z,1528884783.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:03.295Z,1528884783.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:03.658Z,1528884783.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:03.692Z,1528884783.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:04.046Z,1528884784.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:04.065Z,1528884784.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:04.447Z,1528884784.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:04.465Z,1528884784.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:04.846Z,1528884784.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:04.864Z,1528884784.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:05.247Z,1528884785.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:05.264Z,1528884785.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:05.659Z,1528884785.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:05.700Z,1528884785.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:06.057Z,1528884786.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:06.075Z,1528884786.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:06.454Z,1528884786.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:06.472Z,1528884786.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:06.847Z,1528884786.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:06.866Z,1528884786.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:07.248Z,1528884787.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:07.267Z,1528884787.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:07.648Z,1528884787.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:07.667Z,1528884787.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:08.048Z,1528884788.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:08.066Z,1528884788.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:08.446Z,1528884788.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:08.464Z,1528884788.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:08.857Z,1528884788.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:08.897Z,1528884788.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:09.257Z,1528884789.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:09.275Z,1528884789.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:09.654Z,1528884789.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:09.672Z,1528884789.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:10.049Z,1528884790.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:10.067Z,1528884790.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:10.450Z,1528884790.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:10.468Z,1528884790.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:10.846Z,1528884790.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:10.864Z,1528884790.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:11.247Z,1528884791.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:11.277Z,1528884791.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:11.655Z,1528884791.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:11.673Z,1528884791.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:12.058Z,1528884792.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:12.077Z,1528884792.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:12.458Z,1528884792.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:12.476Z,1528884792.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:12.848Z,1528884792.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:12.868Z,1528884792.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:13.246Z,1528884793.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:13.264Z,1528884793.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:13.647Z,1528884793.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:13.677Z,1528884793.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:14.043Z,1528884794.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:14.071Z,1528884794.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:14.439Z,1528884794.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:14.477Z,1528884794.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:14.859Z,1528884794.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:14.884Z,1528884794.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:15.263Z,1528884795.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:15.287Z,1528884795.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:15.660Z,1528884795.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:15.678Z,1528884795.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:16.043Z,1528884796.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:16.077Z,1528884796.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:16.438Z,1528884796.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:16.475Z,1528884796.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:16.843Z,1528884796.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:16.874Z,1528884796.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:17.239Z,1528884797.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:17.273Z,1528884797.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:17.653Z,1528884797.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:17.681Z,1528884797.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:18.053Z,1528884798.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:18.089Z,1528884798.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:18.457Z,1528884798.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:18.484Z,1528884798.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:18.846Z,1528884798.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:18.886Z,1528884798.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:19.247Z,1528884799.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:19.289Z,1528884799.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:19.643Z,1528884799.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:19.688Z,1528884799.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:20.048Z,1528884800.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:20.068Z,1528884800.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:23.157Z,1528884803.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:23.192Z,1528884803.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:23.314Z,1528884803.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:23.348Z,1528884803.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:23.709Z,1528884803.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:23.733Z,1528884803.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:24.113Z,1528884804.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:24.144Z,1528884804.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:24.495Z,1528884804.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:24.529Z,1528884804.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:24.898Z,1528884804.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:24.920Z,1528884804.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:25.298Z,1528884805.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:25.316Z,1528884805.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:25.709Z,1528884805.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:25.727Z,1528884805.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:26.113Z,1528884806.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:26.153Z,1528884806.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:26.509Z,1528884806.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:26.527Z,1528884806.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:26.900Z,1528884806.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:26.917Z,1528884806.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:27.299Z,1528884807.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:27.317Z,1528884807.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:27.700Z,1528884807.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:27.718Z,1528884807.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:28.100Z,1528884808.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:28.118Z,1528884808.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:28.499Z,1528884808.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:28.517Z,1528884808.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:28.909Z,1528884808.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:28.927Z,1528884808.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:29.309Z,1528884809.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:29.327Z,1528884809.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:29.705Z,1528884809.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:29.728Z,1528884809.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:30.100Z,1528884810.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:30.118Z,1528884810.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:30.500Z,1528884810.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:30.517Z,1528884810.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:30.901Z,1528884810.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:30.919Z,1528884810.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:31.301Z,1528884811.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:31.319Z,1528884811.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:31.706Z,1528884811.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:31.723Z,1528884811.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:32.109Z,1528884812.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:32.126Z,1528884812.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:32.509Z,1528884812.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:32.527Z,1528884812.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:32.900Z,1528884812.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:32.918Z,1528884812.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:33.299Z,1528884813.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:33.317Z,1528884813.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:33.702Z,1528884813.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:33.720Z,1528884813.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:34.094Z,1528884814.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:34.124Z,1528884814.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:34.500Z,1528884814.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:34.518Z,1528884814.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:34.909Z,1528884814.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:34.951Z,1528884814.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:35.309Z,1528884815.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:35.327Z,1528884815.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:35.712Z,1528884815.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:35.750Z,1528884815.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:36.101Z,1528884816.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:36.119Z,1528884816.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:36.500Z,1528884816.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:36.517Z,1528884816.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:36.900Z,1528884816.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:36.918Z,1528884816.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:37.301Z,1528884817.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:37.319Z,1528884817.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:37.706Z,1528884817.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:37.724Z,1528884817.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:38.109Z,1528884818.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:38.150Z,1528884818.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:38.509Z,1528884818.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:38.527Z,1528884818.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:38.900Z,1528884818.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:38.918Z,1528884818.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:39.300Z,1528884819.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:39.318Z,1528884819.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:39.701Z,1528884819.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:39.720Z,1528884819.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:40.100Z,1528884820.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:40.118Z,1528884820.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:40.502Z,1528884820.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:40.520Z,1528884820.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:40.909Z,1528884820.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:40.927Z,1528884820.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:41.309Z,1528884821.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:41.327Z,1528884821.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:41.713Z,1528884821.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:41.747Z,1528884821.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:42.102Z,1528884822.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:42.120Z,1528884822.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:42.502Z,1528884822.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:42.520Z,1528884822.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:42.900Z,1528884822.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:42.918Z,1528884822.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:43.302Z,1528884823.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:43.319Z,1528884823.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:43.705Z,1528884823.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:43.723Z,1528884823.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:44.109Z,1528884824.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:44.127Z,1528884824.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:44.510Z,1528884824.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:44.528Z,1528884824.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:44.902Z,1528884824.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:44.924Z,1528884824.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:45.303Z,1528884825.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:45.321Z,1528884825.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:45.703Z,1528884825.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:45.721Z,1528884825.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:46.099Z,1528884826.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:46.129Z,1528884826.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:46.499Z,1528884826.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:46.524Z,1528884826.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:46.914Z,1528884826.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:46.936Z,1528884826.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:47.311Z,1528884827.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:47.336Z,1528884827.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:47.712Z,1528884827.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:47.736Z,1528884827.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:48.103Z,1528884828.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:48.121Z,1528884828.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:48.499Z,1528884828.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:48.523Z,1528884828.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:48.907Z,1528884828.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:48.926Z,1528884828.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:49.303Z,1528884829.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:49.322Z,1528884829.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:49.710Z,1528884829.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:49.729Z,1528884829.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:50.111Z,1528884830.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:50.130Z,1528884830.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:50.511Z,1528884830.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:50.529Z,1528884830.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:50.899Z,1528884830.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:50.922Z,1528884830.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:51.299Z,1528884831.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:51.324Z,1528884831.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:51.702Z,1528884831.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:51.720Z,1528884831.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:52.106Z,1528884832.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:52.124Z,1528884832.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:52.505Z,1528884832.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:52.523Z,1528884832.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:52.911Z,1528884832.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:52.937Z,1528884832.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:53.310Z,1528884833.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:53.332Z,1528884833.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:53.710Z,1528884833.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:53.732Z,1528884833.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:54.102Z,1528884834.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:54.120Z,1528884834.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:54.499Z,1528884834.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:54.522Z,1528884834.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:54.899Z,1528884834.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:54.924Z,1528884834.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:55.303Z,1528884835.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:55.321Z,1528884835.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:55.710Z,1528884835.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:55.732Z,1528884835.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:56.110Z,1528884836.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:56.136Z,1528884836.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:56.511Z,1528884836.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:56.528Z,1528884836.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:56.906Z,1528884836.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:56.928Z,1528884836.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:57.305Z,1528884837.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:57.323Z,1528884837.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:57.701Z,1528884837.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:57.719Z,1528884837.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:58.099Z,1528884838.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:58.122Z,1528884838.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:58.504Z,1528884838.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:58.522Z,1528884838.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:58.911Z,1528884838.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:58.929Z,1528884838.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:59.310Z,1528884839.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:59.332Z,1528884839.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:13:59.711Z,1528884839.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:13:59.729Z,1528884839.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:00.100Z,1528884840.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:00.118Z,1528884840.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:00.505Z,1528884840.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:00.522Z,1528884840.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:00.899Z,1528884840.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:00.926Z,1528884840.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:01.295Z,1528884841.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:01.323Z,1528884841.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:01.716Z,1528884841.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:01.740Z,1528884841.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:02.115Z,1528884842.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:02.133Z,1528884842.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:02.516Z,1528884842.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:02.534Z,1528884842.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:02.895Z,1528884842.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:02.922Z,1528884842.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:03.297Z,1528884843.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:03.332Z,1528884843.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:03.695Z,1528884843.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:03.729Z,1528884843.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:04.100Z,1528884844.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:04.127Z,1528884844.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:04.495Z,1528884844.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:04.528Z,1528884844.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:04.914Z,1528884844.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:04.935Z,1528884844.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:05.315Z,1528884845.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:05.332Z,1528884845.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:05.715Z,1528884845.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:05.734Z,1528884845.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:06.095Z,1528884846.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:06.133Z,1528884846.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:06.499Z,1528884846.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:06.536Z,1528884846.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:06.898Z,1528884846.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:06.932Z,1528884846.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:07.299Z,1528884847.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:07.332Z,1528884847.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:07.716Z,1528884847.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:07.733Z,1528884847.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:08.115Z,1528884848.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:08.149Z,1528884848.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:08.507Z,1528884848.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:08.541Z,1528884848.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:08.899Z,1528884848.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:08.939Z,1528884848.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:09.299Z,1528884849.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:09.316Z,1528884849.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:09.702Z,1528884849.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:09.720Z,1528884849.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:10.101Z,1528884850.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:10.118Z,1528884850.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:10.501Z,1528884850.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:10.520Z,1528884850.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:10.909Z,1528884850.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:10.943Z,1528884850.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:11.311Z,1528884851.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:11.345Z,1528884851.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:11.708Z,1528884851.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:11.726Z,1528884851.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:12.102Z,1528884852.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:12.119Z,1528884852.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:12.502Z,1528884852.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:12.520Z,1528884852.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:12.901Z,1528884852.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:12.922Z,1528884852.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:13.302Z,1528884853.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:13.320Z,1528884853.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:13.706Z,1528884853.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:13.724Z,1528884853.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:14.113Z,1528884854.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:14.151Z,1528884854.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:14.508Z,1528884854.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:14.527Z,1528884854.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:14.902Z,1528884854.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:14.924Z,1528884854.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:15.302Z,1528884855.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:15.332Z,1528884855.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:15.704Z,1528884855.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:15.722Z,1528884855.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:16.099Z,1528884856.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:16.140Z,1528884856.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:16.498Z,1528884856.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:16.554Z,1528884856.554 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:16.554Z,1528884856.554 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 136
2018-06-13T10:14:16.554Z,1528884856.554 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:14:16.555Z,1528884856.555 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:16.556Z,1528884856.556 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 136
2018-06-13T10:14:16.556Z,1528884856.556 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:14:16.557Z,1528884856.557 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:16.558Z,1528884856.558 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 136
2018-06-13T10:14:16.558Z,1528884856.558 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:14:16.645Z,1528884856.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:14:16.645Z,1528884856.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:14:16.646Z,1528884856.646 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:14:16.907Z,1528884856.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:17.013Z,1528884857.013 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:14:17.013Z,1528884857.013 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 136
2018-06-13T10:14:17.014Z,1528884857.014 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:14:17.014Z,1528884857.014 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 136
2018-06-13T10:14:17.014Z,1528884857.014 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:14:17.014Z,1528884857.014 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 136
2018-06-13T10:14:17.310Z,1528884857.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:17.340Z,1528884857.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:14:17.341Z,1528884857.341 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:14:17.341Z,1528884857.341 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:14:17.342Z,1528884857.342 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:14:17.342Z,1528884857.342 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:14:17.342Z,1528884857.342 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:14:17.343Z,1528884857.343 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:14:17.343Z,1528884857.343 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:14:17.343Z,1528884857.343 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:14:17.719Z,1528884857.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:17.737Z,1528884857.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:14:17.738Z,1528884857.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:18.095Z,1528884858.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:18.132Z,1528884858.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:14:18.133Z,1528884858.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:18.501Z,1528884858.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:18.532Z,1528884858.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:14:18.533Z,1528884858.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:18.536Z,1528884858.536 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T10:14:18.536Z,1528884858.536 [Default:CheckIn:C.Wait] Stopped
2018-06-13T10:14:18.536Z,1528884858.536 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T10:14:18.536Z,1528884858.536 [Default:CheckIn:D] Running Loop=1
2018-06-13T10:14:18.903Z,1528884858.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:18.929Z,1528884858.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:14:18.930Z,1528884858.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:18.937Z,1528884858.937 [Default:CheckIn:D] Stopped
2018-06-13T10:14:18.937Z,1528884858.937 [Default:CheckIn:E] Running Loop=1
2018-06-13T10:14:22.010Z,1528884862.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:22.028Z,1528884862.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T10:14:22.050Z,1528884862.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:22.057Z,1528884862.057 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 407.091536 min 
2018-06-13T10:14:22.057Z,1528884862.057 [Default:CheckIn:E] Stopped
2018-06-13T10:14:22.057Z,1528884862.057 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T10:14:22.058Z,1528884862.058 [Default:CheckIn] Stopped
2018-06-13T10:14:22.058Z,1528884862.058 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T10:14:22.058Z,1528884862.058 [Default:CheckIn](INFO): Running loop #40
2018-06-13T10:14:22.058Z,1528884862.058 [Default:CheckIn] Running Loop=40
2018-06-13T10:14:22.058Z,1528884862.058 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T10:14:22.058Z,1528884862.058 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T10:14:22.190Z,1528884862.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:22.216Z,1528884862.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T10:14:22.217Z,1528884862.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:22.591Z,1528884862.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:22.609Z,1528884862.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T10:14:22.610Z,1528884862.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:22.988Z,1528884862.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:23.006Z,1528884863.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T10:14:23.007Z,1528884863.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:23.367Z,1528884863.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:23.411Z,1528884863.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T10:14:23.412Z,1528884863.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:23.767Z,1528884863.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:23.784Z,1528884863.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:14:23.802Z,1528884863.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:24.168Z,1528884864.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:24.185Z,1528884864.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:14:24.186Z,1528884864.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:24.571Z,1528884864.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:24.588Z,1528884864.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:14:24.589Z,1528884864.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:24.981Z,1528884864.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:25.015Z,1528884865.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T10:14:25.016Z,1528884865.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:25.381Z,1528884865.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:25.400Z,1528884865.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:14:25.421Z,1528884865.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:25.778Z,1528884865.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:25.795Z,1528884865.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:14:25.796Z,1528884865.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:26.174Z,1528884866.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:26.192Z,1528884866.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:14:26.193Z,1528884866.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:26.570Z,1528884866.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:26.587Z,1528884866.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:14:26.588Z,1528884866.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:26.973Z,1528884866.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:26.991Z,1528884866.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:14:26.992Z,1528884866.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:27.371Z,1528884867.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:27.406Z,1528884867.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T10:14:27.407Z,1528884867.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:27.783Z,1528884867.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:27.801Z,1528884867.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:14:27.802Z,1528884867.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:28.183Z,1528884868.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:28.202Z,1528884868.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:14:28.202Z,1528884868.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:28.582Z,1528884868.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:28.600Z,1528884868.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:14:28.601Z,1528884868.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:28.970Z,1528884868.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:28.988Z,1528884868.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:14:28.989Z,1528884868.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:29.363Z,1528884869.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:29.396Z,1528884869.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:14:29.402Z,1528884869.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:29.767Z,1528884869.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:29.804Z,1528884869.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T10:14:29.806Z,1528884869.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:30.164Z,1528884870.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:30.201Z,1528884870.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:14:30.202Z,1528884870.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:30.567Z,1528884870.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:30.605Z,1528884870.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:14:30.606Z,1528884870.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:30.978Z,1528884870.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:31.007Z,1528884871.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T10:14:31.008Z,1528884871.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:31.381Z,1528884871.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:31.410Z,1528884871.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T10:14:31.411Z,1528884871.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:31.778Z,1528884871.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:31.805Z,1528884871.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T10:14:31.806Z,1528884871.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:32.167Z,1528884872.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:32.205Z,1528884872.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:14:32.206Z,1528884872.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:32.567Z,1528884872.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:32.585Z,1528884872.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:14:32.586Z,1528884872.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:32.973Z,1528884872.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:33.016Z,1528884873.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T10:14:33.021Z,1528884873.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:33.371Z,1528884873.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:33.388Z,1528884873.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:14:33.390Z,1528884873.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:33.786Z,1528884873.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:33.816Z,1528884873.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T10:14:33.821Z,1528884873.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:34.186Z,1528884874.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:34.224Z,1528884874.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T10:14:34.229Z,1528884874.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:34.582Z,1528884874.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:34.600Z,1528884874.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:14:34.601Z,1528884874.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:34.972Z,1528884874.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:34.991Z,1528884874.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T10:14:34.992Z,1528884874.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:35.377Z,1528884875.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:35.395Z,1528884875.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:14:35.396Z,1528884875.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:35.771Z,1528884875.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:35.811Z,1528884875.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T10:14:35.812Z,1528884875.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:36.171Z,1528884876.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:36.189Z,1528884876.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:14:36.190Z,1528884876.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:36.567Z,1528884876.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:36.604Z,1528884876.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:36.982Z,1528884876.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:37.002Z,1528884877.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:37.382Z,1528884877.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:37.400Z,1528884877.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:37.782Z,1528884877.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:37.801Z,1528884877.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:38.172Z,1528884878.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:38.192Z,1528884878.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:38.574Z,1528884878.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:38.592Z,1528884878.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:38.971Z,1528884878.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:39.004Z,1528884879.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:39.372Z,1528884879.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:39.396Z,1528884879.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:39.779Z,1528884879.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:39.798Z,1528884879.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:40.185Z,1528884880.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:40.204Z,1528884880.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:40.582Z,1528884880.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:40.600Z,1528884880.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:40.970Z,1528884880.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:40.988Z,1528884880.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:41.363Z,1528884881.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:41.430Z,1528884881.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:41.777Z,1528884881.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:41.796Z,1528884881.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:42.174Z,1528884882.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:42.192Z,1528884882.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:42.574Z,1528884882.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:42.592Z,1528884882.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:42.983Z,1528884882.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:43.002Z,1528884883.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:43.384Z,1528884883.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:43.402Z,1528884883.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:43.786Z,1528884883.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:43.805Z,1528884883.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:44.171Z,1528884884.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:44.195Z,1528884884.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:44.563Z,1528884884.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:44.602Z,1528884884.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:44.977Z,1528884884.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:44.995Z,1528884884.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:45.377Z,1528884885.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:45.401Z,1528884885.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:45.784Z,1528884885.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:45.802Z,1528884885.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:46.187Z,1528884886.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:46.206Z,1528884886.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:46.588Z,1528884886.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:46.606Z,1528884886.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:46.968Z,1528884886.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:46.999Z,1528884886.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:47.377Z,1528884887.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:47.401Z,1528884887.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:47.767Z,1528884887.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:47.804Z,1528884887.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:48.166Z,1528884888.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:48.203Z,1528884888.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:48.569Z,1528884888.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:48.602Z,1528884888.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:48.988Z,1528884888.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:49.006Z,1528884889.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:49.388Z,1528884889.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:49.406Z,1528884889.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:49.782Z,1528884889.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:49.814Z,1528884889.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:50.170Z,1528884890.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:50.204Z,1528884890.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:50.567Z,1528884890.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:50.596Z,1528884890.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:50.968Z,1528884890.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:51.002Z,1528884891.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:51.369Z,1528884891.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:51.404Z,1528884891.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:51.781Z,1528884891.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:51.811Z,1528884891.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:52.185Z,1528884892.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:52.220Z,1528884892.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:52.577Z,1528884892.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:52.615Z,1528884892.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:52.969Z,1528884892.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:52.988Z,1528884892.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:53.374Z,1528884893.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:53.391Z,1528884893.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:53.772Z,1528884893.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:53.802Z,1528884893.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:54.171Z,1528884894.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:54.189Z,1528884894.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:54.575Z,1528884894.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:54.593Z,1528884894.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:54.981Z,1528884894.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:54.000Z,1528884895.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:55.381Z,1528884895.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:55.400Z,1528884895.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:55.782Z,1528884895.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:55.800Z,1528884895.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:56.173Z,1528884896.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:56.210Z,1528884896.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:56.572Z,1528884896.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:56.590Z,1528884896.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:56.975Z,1528884896.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:57.006Z,1528884897.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:57.377Z,1528884897.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:57.395Z,1528884897.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:57.788Z,1528884897.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:57.806Z,1528884897.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:58.188Z,1528884898.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:58.212Z,1528884898.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:58.587Z,1528884898.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:58.605Z,1528884898.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:58.975Z,1528884898.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:58.993Z,1528884898.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:59.372Z,1528884899.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:59.410Z,1528884899.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:14:59.764Z,1528884899.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:14:59.804Z,1528884899.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:00.166Z,1528884900.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:00.210Z,1528884900.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:00.568Z,1528884900.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:00.601Z,1528884900.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:00.988Z,1528884900.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:01.007Z,1528884901.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:01.386Z,1528884901.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:01.405Z,1528884901.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:01.782Z,1528884901.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:01.814Z,1528884901.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:02.172Z,1528884902.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:02.205Z,1528884902.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:02.563Z,1528884902.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:02.600Z,1528884902.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:02.969Z,1528884902.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:03.001Z,1528884903.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:03.369Z,1528884903.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:03.405Z,1528884903.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:03.787Z,1528884903.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:03.810Z,1528884903.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:04.191Z,1528884904.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:04.209Z,1528884904.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:04.587Z,1528884904.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:04.606Z,1528884904.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:04.965Z,1528884904.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:04.995Z,1528884904.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:05.370Z,1528884905.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:05.398Z,1528884905.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:05.768Z,1528884905.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:05.816Z,1528884905.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:06.163Z,1528884906.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:06.200Z,1528884906.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:06.569Z,1528884906.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:06.615Z,1528884906.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:06.982Z,1528884906.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:07.015Z,1528884907.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:07.390Z,1528884907.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:07.410Z,1528884907.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:07.784Z,1528884907.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:07.820Z,1528884907.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:08.168Z,1528884908.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:08.209Z,1528884908.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:08.565Z,1528884908.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:08.595Z,1528884908.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:08.968Z,1528884908.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:09.007Z,1528884909.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:09.367Z,1528884909.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:09.411Z,1528884909.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:09.782Z,1528884909.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:09.812Z,1528884909.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:10.182Z,1528884910.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:10.220Z,1528884910.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:10.598Z,1528884910.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:10.616Z,1528884910.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:10.963Z,1528884910.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:11.011Z,1528884911.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:11.367Z,1528884911.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:11.412Z,1528884911.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:11.771Z,1528884911.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:11.798Z,1528884911.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:12.170Z,1528884912.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:12.214Z,1528884912.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:12.572Z,1528884912.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:12.594Z,1528884912.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:12.985Z,1528884912.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:13.020Z,1528884913.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:13.387Z,1528884913.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:13.420Z,1528884913.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:13.782Z,1528884913.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:13.824Z,1528884913.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:14.174Z,1528884914.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:14.214Z,1528884914.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:14.571Z,1528884914.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:14.594Z,1528884914.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:14.976Z,1528884914.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:14.000Z,1528884915.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:15.375Z,1528884915.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:15.427Z,1528884915.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:15.780Z,1528884915.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:15.803Z,1528884915.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:16.184Z,1528884916.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:16.204Z,1528884916.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:16.582Z,1528884916.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:16.600Z,1528884916.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:16.970Z,1528884916.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:17.026Z,1528884917.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:17.370Z,1528884917.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:17.389Z,1528884917.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:17.772Z,1528884917.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:17.801Z,1528884917.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:18.171Z,1528884918.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:18.194Z,1528884918.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:18.576Z,1528884918.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:18.626Z,1528884918.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:18.981Z,1528884918.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:19.006Z,1528884919.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:22.093Z,1528884922.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:22.127Z,1528884922.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:22.268Z,1528884922.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:22.286Z,1528884922.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:22.643Z,1528884922.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:22.681Z,1528884922.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:23.049Z,1528884923.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:23.087Z,1528884923.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:23.443Z,1528884923.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:23.468Z,1528884923.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:23.854Z,1528884923.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:23.872Z,1528884923.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:24.253Z,1528884924.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:24.271Z,1528884924.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:24.650Z,1528884924.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:24.668Z,1528884924.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:25.046Z,1528884925.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:25.064Z,1528884925.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:25.445Z,1528884925.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:25.464Z,1528884925.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:25.844Z,1528884925.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:25.862Z,1528884925.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:26.245Z,1528884926.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:26.262Z,1528884926.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:26.646Z,1528884926.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:26.664Z,1528884926.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:27.057Z,1528884927.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:27.076Z,1528884927.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:27.453Z,1528884927.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:27.476Z,1528884927.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:27.851Z,1528884927.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:27.869Z,1528884927.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:28.250Z,1528884928.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:28.267Z,1528884928.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:28.648Z,1528884928.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:28.665Z,1528884928.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:29.042Z,1528884929.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:29.060Z,1528884929.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:29.443Z,1528884929.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:29.473Z,1528884929.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:29.854Z,1528884929.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:29.876Z,1528884929.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:30.255Z,1528884930.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:30.273Z,1528884930.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:30.653Z,1528884930.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:30.675Z,1528884930.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:31.045Z,1528884931.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:31.062Z,1528884931.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:31.444Z,1528884931.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:31.462Z,1528884931.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:31.845Z,1528884931.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:31.863Z,1528884931.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:32.243Z,1528884932.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:32.276Z,1528884932.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:32.642Z,1528884932.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:32.660Z,1528884932.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:33.057Z,1528884933.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:33.075Z,1528884933.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:33.454Z,1528884933.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:33.476Z,1528884933.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:33.855Z,1528884933.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:33.873Z,1528884933.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:34.243Z,1528884934.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:34.266Z,1528884934.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:34.648Z,1528884934.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:34.665Z,1528884934.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:35.050Z,1528884935.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:35.067Z,1528884935.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:35.448Z,1528884935.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:35.472Z,1528884935.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:35.854Z,1528884935.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:35.872Z,1528884935.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:36.257Z,1528884936.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:36.275Z,1528884936.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:36.655Z,1528884936.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:36.672Z,1528884936.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:37.049Z,1528884937.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:37.069Z,1528884937.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:37.446Z,1528884937.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:37.464Z,1528884937.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:37.847Z,1528884937.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:37.871Z,1528884937.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:38.249Z,1528884938.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:38.267Z,1528884938.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:38.650Z,1528884938.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:38.668Z,1528884938.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:39.054Z,1528884939.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:39.072Z,1528884939.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:39.458Z,1528884939.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:39.480Z,1528884939.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:39.856Z,1528884939.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:39.874Z,1528884939.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:40.249Z,1528884940.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:40.268Z,1528884940.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:40.649Z,1528884940.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:40.667Z,1528884940.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:41.051Z,1528884941.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:41.069Z,1528884941.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:41.444Z,1528884941.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:41.476Z,1528884941.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:41.857Z,1528884941.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:41.880Z,1528884941.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:42.257Z,1528884942.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:42.275Z,1528884942.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:42.658Z,1528884942.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:42.676Z,1528884942.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:43.048Z,1528884943.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:43.072Z,1528884943.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:43.449Z,1528884943.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:43.467Z,1528884943.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:43.849Z,1528884943.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:43.872Z,1528884943.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:44.245Z,1528884944.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:44.279Z,1528884944.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:44.647Z,1528884944.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:44.672Z,1528884944.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:45.054Z,1528884945.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:45.076Z,1528884945.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:45.457Z,1528884945.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:45.480Z,1528884945.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:45.858Z,1528884945.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:45.880Z,1528884945.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:46.243Z,1528884946.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:46.278Z,1528884946.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:46.647Z,1528884946.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:46.666Z,1528884946.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:47.051Z,1528884947.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:47.069Z,1528884947.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:47.440Z,1528884947.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:47.472Z,1528884947.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:47.859Z,1528884947.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:47.877Z,1528884947.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:48.260Z,1528884948.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:48.284Z,1528884948.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:48.659Z,1528884948.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:48.677Z,1528884948.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:49.039Z,1528884949.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:49.072Z,1528884949.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:49.450Z,1528884949.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:49.474Z,1528884949.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:49.848Z,1528884949.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:49.872Z,1528884949.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:50.245Z,1528884950.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:50.271Z,1528884950.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:50.639Z,1528884950.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:50.672Z,1528884950.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:51.063Z,1528884951.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:51.084Z,1528884951.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:51.461Z,1528884951.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:51.479Z,1528884951.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:51.860Z,1528884951.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:51.878Z,1528884951.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:52.243Z,1528884952.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:52.285Z,1528884952.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:52.643Z,1528884952.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:52.665Z,1528884952.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:53.046Z,1528884953.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:53.064Z,1528884953.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:53.446Z,1528884953.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:53.468Z,1528884953.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:53.853Z,1528884953.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:53.896Z,1528884953.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:54.256Z,1528884954.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:54.274Z,1528884954.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:54.651Z,1528884954.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:54.669Z,1528884954.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:55.047Z,1528884955.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:55.087Z,1528884955.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:55.446Z,1528884955.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:55.494Z,1528884955.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:55.845Z,1528884955.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:55.867Z,1528884955.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:56.250Z,1528884956.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:56.268Z,1528884956.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:56.649Z,1528884956.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:56.671Z,1528884956.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:57.050Z,1528884957.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:57.087Z,1528884957.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:57.455Z,1528884957.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:57.496Z,1528884957.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:57.856Z,1528884957.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:57.898Z,1528884957.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:58.249Z,1528884958.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:58.273Z,1528884958.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:58.643Z,1528884958.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:58.690Z,1528884958.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:59.040Z,1528884959.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:59.084Z,1528884959.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:59.447Z,1528884959.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:59.472Z,1528884959.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:15:59.855Z,1528884959.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:15:59.874Z,1528884959.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:00.252Z,1528884960.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:00.297Z,1528884960.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:00.651Z,1528884960.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:00.674Z,1528884960.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:01.044Z,1528884961.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:01.082Z,1528884961.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:01.446Z,1528884961.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:01.477Z,1528884961.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:01.843Z,1528884961.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:01.882Z,1528884961.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:02.242Z,1528884962.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:02.279Z,1528884962.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:02.635Z,1528884962.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:02.677Z,1528884962.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:03.064Z,1528884963.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:03.082Z,1528884963.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:03.459Z,1528884963.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:03.508Z,1528884963.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:03.861Z,1528884963.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:03.883Z,1528884963.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:04.239Z,1528884964.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:04.288Z,1528884964.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:04.639Z,1528884964.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:04.695Z,1528884964.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:05.039Z,1528884965.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:05.088Z,1528884965.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:05.439Z,1528884965.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:05.476Z,1528884965.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:05.858Z,1528884965.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:05.879Z,1528884965.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:06.260Z,1528884966.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:06.278Z,1528884966.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:06.660Z,1528884966.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:06.696Z,1528884966.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:07.039Z,1528884967.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:07.077Z,1528884967.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:07.435Z,1528884967.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:07.480Z,1528884967.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:07.839Z,1528884967.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:07.885Z,1528884967.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:08.240Z,1528884968.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:08.279Z,1528884968.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:08.635Z,1528884968.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:08.679Z,1528884968.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:09.056Z,1528884969.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:09.079Z,1528884969.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:09.459Z,1528884969.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:09.496Z,1528884969.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:09.861Z,1528884969.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:09.896Z,1528884969.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:10.239Z,1528884970.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:10.280Z,1528884970.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:10.640Z,1528884970.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:10.688Z,1528884970.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:11.038Z,1528884971.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:11.077Z,1528884971.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:11.443Z,1528884971.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:11.460Z,1528884971.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:11.853Z,1528884971.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:11.887Z,1528884971.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:12.249Z,1528884972.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:12.272Z,1528884972.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:12.650Z,1528884972.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:12.689Z,1528884972.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:13.044Z,1528884973.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:13.062Z,1528884973.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:13.442Z,1528884973.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:13.460Z,1528884973.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:13.844Z,1528884973.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:13.862Z,1528884973.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:14.244Z,1528884974.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:14.267Z,1528884974.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:14.642Z,1528884974.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:14.660Z,1528884974.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:15.049Z,1528884975.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:15.067Z,1528884975.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:15.453Z,1528884975.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:15.475Z,1528884975.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:15.853Z,1528884975.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:15.876Z,1528884975.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:16.244Z,1528884976.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:16.262Z,1528884976.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:16.645Z,1528884976.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:16.663Z,1528884976.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:17.043Z,1528884977.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:17.060Z,1528884977.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:17.444Z,1528884977.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:17.476Z,1528884977.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:17.854Z,1528884977.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:17.872Z,1528884977.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:18.255Z,1528884978.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:18.273Z,1528884978.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:18.658Z,1528884978.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:18.705Z,1528884978.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:19.049Z,1528884979.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:19.074Z,1528884979.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:22.164Z,1528884982.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:22.182Z,1528884982.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:22.323Z,1528884982.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:22.358Z,1528884982.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:22.729Z,1528884982.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:22.760Z,1528884982.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:23.147Z,1528884983.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:23.164Z,1528884983.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:23.525Z,1528884983.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:23.556Z,1528884983.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:23.917Z,1528884983.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:23.935Z,1528884983.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:24.317Z,1528884984.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:24.335Z,1528884984.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:24.720Z,1528884984.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:24.737Z,1528884984.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:25.133Z,1528884985.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:25.166Z,1528884985.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:25.529Z,1528884985.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:25.563Z,1528884985.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:25.930Z,1528884985.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:25.968Z,1528884985.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:26.324Z,1528884986.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:26.342Z,1528884986.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:26.720Z,1528884986.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:26.738Z,1528884986.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:27.120Z,1528884987.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:27.138Z,1528884987.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:27.523Z,1528884987.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:27.542Z,1528884987.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:27.926Z,1528884987.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:27.943Z,1528884987.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:28.333Z,1528884988.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:28.351Z,1528884988.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:28.726Z,1528884988.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:28.744Z,1528884988.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:29.121Z,1528884989.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:29.139Z,1528884989.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:29.523Z,1528884989.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:29.546Z,1528884989.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:29.924Z,1528884989.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:29.942Z,1528884989.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:30.323Z,1528884990.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:30.341Z,1528884990.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:30.722Z,1528884990.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:30.752Z,1528884990.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:31.127Z,1528884991.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:31.157Z,1528884991.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:31.536Z,1528884991.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:31.554Z,1528884991.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:31.938Z,1528884991.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:31.960Z,1528884991.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:32.322Z,1528884992.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:32.351Z,1528884992.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:32.714Z,1528884992.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:32.749Z,1528884992.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:33.119Z,1528884993.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:33.152Z,1528884993.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:33.519Z,1528884993.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:33.547Z,1528884993.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:33.934Z,1528884993.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:33.965Z,1528884993.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:34.334Z,1528884994.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:34.366Z,1528884994.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:34.735Z,1528884994.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:34.753Z,1528884994.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:35.119Z,1528884995.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:35.157Z,1528884995.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:35.515Z,1528884995.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:35.556Z,1528884995.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:35.916Z,1528884995.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:35.956Z,1528884995.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:36.314Z,1528884996.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:36.348Z,1528884996.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:36.719Z,1528884996.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:36.752Z,1528884996.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:37.126Z,1528884997.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:37.155Z,1528884997.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:37.535Z,1528884997.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:37.563Z,1528884997.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:37.933Z,1528884997.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:37.960Z,1528884997.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:38.320Z,1528884998.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:38.338Z,1528884998.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:38.714Z,1528884998.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:38.765Z,1528884998.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:39.122Z,1528884999.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:39.141Z,1528884999.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:39.521Z,1528884999.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:39.539Z,1528884999.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:39.929Z,1528884999.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:39.955Z,1528884999.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:40.331Z,1528885000.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:40.369Z,1528885000.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:40.732Z,1528885000.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:40.777Z,1528885000.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:41.120Z,1528885001.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:41.139Z,1528885001.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:41.524Z,1528885001.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:41.552Z,1528885001.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:41.922Z,1528885001.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:41.971Z,1528885001.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:42.325Z,1528885002.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:42.368Z,1528885002.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:42.726Z,1528885002.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:42.743Z,1528885002.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:43.130Z,1528885003.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:43.148Z,1528885003.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:43.525Z,1528885003.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:43.568Z,1528885003.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:43.929Z,1528885003.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:43.975Z,1528885003.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:44.324Z,1528885004.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:44.342Z,1528885004.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:44.723Z,1528885004.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:44.758Z,1528885004.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:45.120Z,1528885005.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:45.156Z,1528885005.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:45.519Z,1528885005.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:45.565Z,1528885005.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:45.932Z,1528885005.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:45.950Z,1528885005.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:46.332Z,1528885006.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:46.350Z,1528885006.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:46.734Z,1528885006.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:46.773Z,1528885006.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:47.122Z,1528885007.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:47.160Z,1528885007.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:47.524Z,1528885007.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:47.560Z,1528885007.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:47.924Z,1528885007.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:47.943Z,1528885007.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:48.318Z,1528885008.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:48.354Z,1528885008.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:48.722Z,1528885008.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:48.746Z,1528885008.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:49.132Z,1528885009.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:49.156Z,1528885009.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:49.535Z,1528885009.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:49.554Z,1528885009.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:49.930Z,1528885009.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:49.980Z,1528885009.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:50.319Z,1528885010.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:50.357Z,1528885010.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:50.711Z,1528885010.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:50.755Z,1528885010.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:51.112Z,1528885011.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:51.146Z,1528885011.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:51.515Z,1528885011.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:51.549Z,1528885011.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:51.933Z,1528885011.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:51.955Z,1528885011.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:52.340Z,1528885012.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:52.364Z,1528885012.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:52.734Z,1528885012.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:52.753Z,1528885012.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:53.111Z,1528885013.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:53.159Z,1528885013.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:53.516Z,1528885013.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:53.559Z,1528885013.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:53.915Z,1528885013.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:53.956Z,1528885013.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:54.312Z,1528885014.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:54.346Z,1528885014.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:54.715Z,1528885014.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:54.749Z,1528885014.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:55.125Z,1528885015.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:55.160Z,1528885015.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:55.526Z,1528885015.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:55.563Z,1528885015.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:55.932Z,1528885015.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:55.961Z,1528885015.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:56.318Z,1528885016.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:56.365Z,1528885016.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:56.714Z,1528885016.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:56.732Z,1528885016.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:57.118Z,1528885017.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:57.165Z,1528885017.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:57.518Z,1528885017.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:57.558Z,1528885017.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:57.925Z,1528885017.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:57.943Z,1528885017.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:58.329Z,1528885018.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:58.365Z,1528885018.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:58.725Z,1528885018.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:58.749Z,1528885018.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:59.118Z,1528885019.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:59.140Z,1528885019.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:59.520Z,1528885019.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:59.544Z,1528885019.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:16:59.920Z,1528885019.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:16:59.938Z,1528885019.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:00.318Z,1528885020.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:00.337Z,1528885020.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:00.720Z,1528885020.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:00.743Z,1528885020.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:01.125Z,1528885021.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:01.144Z,1528885021.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:01.525Z,1528885021.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:01.543Z,1528885021.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:01.926Z,1528885021.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:01.948Z,1528885021.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:02.320Z,1528885022.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:02.346Z,1528885022.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:02.718Z,1528885022.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:02.736Z,1528885022.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:03.120Z,1528885023.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:03.148Z,1528885023.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:03.520Z,1528885023.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:03.539Z,1528885023.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:03.931Z,1528885023.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:03.954Z,1528885023.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:04.330Z,1528885024.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:04.380Z,1528885024.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:04.731Z,1528885024.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:04.759Z,1528885024.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:05.124Z,1528885025.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:05.142Z,1528885025.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:05.521Z,1528885025.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:05.543Z,1528885025.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:05.931Z,1528885025.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:05.948Z,1528885025.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:06.332Z,1528885026.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:06.349Z,1528885026.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:06.730Z,1528885026.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:06.757Z,1528885026.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:07.120Z,1528885027.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:07.150Z,1528885027.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:07.511Z,1528885027.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:07.549Z,1528885027.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:07.932Z,1528885027.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:07.956Z,1528885027.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:08.335Z,1528885028.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:08.357Z,1528885028.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:08.731Z,1528885028.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:08.754Z,1528885028.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:09.116Z,1528885029.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:09.151Z,1528885029.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:09.515Z,1528885029.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:09.553Z,1528885029.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:09.936Z,1528885029.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:09.957Z,1528885029.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:10.335Z,1528885030.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:10.358Z,1528885030.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:10.731Z,1528885030.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:10.749Z,1528885030.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:11.112Z,1528885031.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:11.148Z,1528885031.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:11.515Z,1528885031.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:11.545Z,1528885031.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:11.925Z,1528885031.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:11.963Z,1528885031.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:12.329Z,1528885032.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:12.357Z,1528885032.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:12.725Z,1528885032.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:12.759Z,1528885032.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:13.115Z,1528885033.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:13.156Z,1528885033.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:13.519Z,1528885033.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:13.537Z,1528885033.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:13.930Z,1528885033.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:13.964Z,1528885033.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:14.329Z,1528885034.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:14.347Z,1528885034.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:14.729Z,1528885034.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:14.747Z,1528885034.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:15.122Z,1528885035.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:15.139Z,1528885035.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:15.519Z,1528885035.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:15.550Z,1528885035.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:15.926Z,1528885035.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:15.945Z,1528885035.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:16.329Z,1528885036.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:16.347Z,1528885036.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:16.730Z,1528885036.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:16.747Z,1528885036.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:17.118Z,1528885037.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:17.136Z,1528885037.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:17.521Z,1528885037.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:17.538Z,1528885037.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:17.539Z,1528885037.539 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 137
2018-06-13T10:17:17.539Z,1528885037.539 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:17:17.540Z,1528885037.540 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:17.541Z,1528885037.541 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 137
2018-06-13T10:17:17.541Z,1528885037.541 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:17:17.542Z,1528885037.542 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:17.543Z,1528885037.543 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 137
2018-06-13T10:17:17.543Z,1528885037.543 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:17:17.617Z,1528885037.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:17:17.617Z,1528885037.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:17:17.618Z,1528885037.618 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:17:17.928Z,1528885037.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:18.045Z,1528885038.045 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:17:18.045Z,1528885038.045 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 137
2018-06-13T10:17:18.046Z,1528885038.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:17:18.046Z,1528885038.046 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 137
2018-06-13T10:17:18.046Z,1528885038.046 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:17:18.046Z,1528885038.046 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 137
2018-06-13T10:17:18.331Z,1528885038.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:18.348Z,1528885038.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:17:18.348Z,1528885038.348 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:17:18.349Z,1528885038.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:17:18.349Z,1528885038.349 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:17:18.350Z,1528885038.350 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:17:18.350Z,1528885038.350 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:17:18.350Z,1528885038.350 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:17:18.351Z,1528885038.351 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:17:18.351Z,1528885038.351 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:17:18.738Z,1528885038.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:18.760Z,1528885038.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:17:18.761Z,1528885038.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:19.125Z,1528885039.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:19.148Z,1528885039.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:17:19.149Z,1528885039.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:22.237Z,1528885042.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:22.256Z,1528885042.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2018-06-13T10:17:22.257Z,1528885042.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:22.394Z,1528885042.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:22.411Z,1528885042.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T10:17:22.412Z,1528885042.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:22.794Z,1528885042.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:22.812Z,1528885042.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T10:17:22.813Z,1528885042.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:23.193Z,1528885043.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:23.210Z,1528885043.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T10:17:23.211Z,1528885043.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:23.567Z,1528885043.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:23.609Z,1528885043.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T10:17:23.610Z,1528885043.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:23.967Z,1528885043.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:24.009Z,1528885044.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T10:17:24.010Z,1528885044.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:24.363Z,1528885044.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:24.409Z,1528885044.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T10:17:24.410Z,1528885044.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:24.767Z,1528885044.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:24.801Z,1528885044.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T10:17:24.802Z,1528885044.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:25.183Z,1528885045.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:25.220Z,1528885045.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T10:17:25.220Z,1528885045.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:25.590Z,1528885045.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:25.611Z,1528885045.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T10:17:25.612Z,1528885045.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:25.985Z,1528885045.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:26.003Z,1528885046.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T10:17:26.004Z,1528885046.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:26.367Z,1528885046.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:26.412Z,1528885046.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T10:17:26.413Z,1528885046.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:26.763Z,1528885046.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:26.811Z,1528885046.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T10:17:26.812Z,1528885046.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:27.179Z,1528885047.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:27.202Z,1528885047.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T10:17:27.203Z,1528885047.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:27.568Z,1528885047.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:27.602Z,1528885047.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T10:17:27.603Z,1528885047.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:27.988Z,1528885047.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:28.018Z,1528885048.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T10:17:28.019Z,1528885048.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:28.388Z,1528885048.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:28.437Z,1528885048.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T10:17:28.438Z,1528885048.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:28.787Z,1528885048.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:28.810Z,1528885048.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T10:17:28.811Z,1528885048.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:29.163Z,1528885049.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:29.213Z,1528885049.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T10:17:29.214Z,1528885049.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:29.564Z,1528885049.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:29.614Z,1528885049.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T10:17:29.615Z,1528885049.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:29.967Z,1528885049.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:29.996Z,1528885049.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T10:17:29.998Z,1528885049.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:30.364Z,1528885050.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:30.406Z,1528885050.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T10:17:30.406Z,1528885050.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:30.768Z,1528885050.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:30.809Z,1528885050.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T10:17:30.810Z,1528885050.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:31.178Z,1528885051.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:31.216Z,1528885051.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T10:17:31.216Z,1528885051.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:31.586Z,1528885051.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:31.624Z,1528885051.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T10:17:31.625Z,1528885051.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:31.989Z,1528885051.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:32.012Z,1528885052.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T10:17:32.013Z,1528885052.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:32.367Z,1528885052.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:32.414Z,1528885052.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T10:17:32.415Z,1528885052.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:32.763Z,1528885052.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:32.791Z,1528885052.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T10:17:32.792Z,1528885052.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:33.168Z,1528885053.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:33.214Z,1528885053.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T10:17:33.215Z,1528885053.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:33.562Z,1528885053.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:33.580Z,1528885053.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:17:33.597Z,1528885053.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:33.977Z,1528885053.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:34.020Z,1528885054.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T10:17:34.025Z,1528885054.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:34.382Z,1528885054.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:34.412Z,1528885054.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T10:17:34.413Z,1528885054.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:34.780Z,1528885054.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:34.816Z,1528885054.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T10:17:34.818Z,1528885054.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:35.166Z,1528885055.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:35.184Z,1528885055.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:17:35.184Z,1528885055.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:35.570Z,1528885055.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:35.587Z,1528885055.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:17:35.588Z,1528885055.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:35.967Z,1528885055.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:35.995Z,1528885055.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T10:17:35.996Z,1528885055.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:36.371Z,1528885056.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:36.391Z,1528885056.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T10:17:36.392Z,1528885056.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:36.767Z,1528885056.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:36.789Z,1528885056.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T10:17:36.790Z,1528885056.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:37.177Z,1528885057.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:37.196Z,1528885057.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T10:17:37.198Z,1528885057.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:37.581Z,1528885057.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:37.603Z,1528885057.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:37.978Z,1528885057.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:37.000Z,1528885058.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:38.373Z,1528885058.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:38.391Z,1528885058.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:38.769Z,1528885058.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:38.787Z,1528885058.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:39.172Z,1528885059.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:39.210Z,1528885059.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:39.573Z,1528885059.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:39.591Z,1528885059.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:39.984Z,1528885059.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:40.002Z,1528885060.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:40.386Z,1528885060.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:40.408Z,1528885060.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:40.783Z,1528885060.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:40.805Z,1528885060.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:41.163Z,1528885061.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:41.193Z,1528885061.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:41.563Z,1528885061.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:41.601Z,1528885061.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:41.983Z,1528885061.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:42.001Z,1528885062.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:42.384Z,1528885062.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:42.407Z,1528885062.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:42.783Z,1528885062.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:42.801Z,1528885062.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:43.167Z,1528885063.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:43.207Z,1528885063.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:43.563Z,1528885063.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:43.600Z,1528885063.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:43.988Z,1528885063.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:44.011Z,1528885064.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:44.386Z,1528885064.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:44.408Z,1528885064.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:44.782Z,1528885064.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:44.800Z,1528885064.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:45.167Z,1528885065.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:45.195Z,1528885065.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:45.566Z,1528885065.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:45.594Z,1528885065.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:45.989Z,1528885065.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:46.007Z,1528885066.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:46.387Z,1528885066.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:46.405Z,1528885066.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:46.783Z,1528885066.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:46.808Z,1528885066.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:47.167Z,1528885067.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:47.195Z,1528885067.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:47.567Z,1528885067.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:47.600Z,1528885067.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:47.979Z,1528885067.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:47.998Z,1528885067.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:48.387Z,1528885068.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:48.405Z,1528885068.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:48.788Z,1528885068.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:48.816Z,1528885068.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:49.168Z,1528885069.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:49.195Z,1528885069.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:49.567Z,1528885069.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:49.595Z,1528885069.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:49.983Z,1528885069.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:50.001Z,1528885070.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:50.383Z,1528885070.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:50.400Z,1528885070.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:50.789Z,1528885070.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:50.807Z,1528885070.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:51.168Z,1528885071.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:51.195Z,1528885071.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:51.567Z,1528885071.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:51.605Z,1528885071.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:51.988Z,1528885071.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:52.005Z,1528885072.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:52.387Z,1528885072.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:52.405Z,1528885072.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:52.783Z,1528885072.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:52.801Z,1528885072.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:53.168Z,1528885073.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:53.203Z,1528885073.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:53.568Z,1528885073.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:53.604Z,1528885073.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:53.977Z,1528885073.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:54.011Z,1528885074.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:54.381Z,1528885074.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:54.412Z,1528885074.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:54.781Z,1528885074.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:54.816Z,1528885074.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:55.167Z,1528885075.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:55.209Z,1528885075.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:55.568Z,1528885075.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:55.608Z,1528885075.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:55.981Z,1528885075.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:56.015Z,1528885076.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:56.384Z,1528885076.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:56.416Z,1528885076.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:56.785Z,1528885076.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:56.813Z,1528885076.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:57.171Z,1528885077.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:57.215Z,1528885077.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:57.570Z,1528885077.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:57.587Z,1528885077.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:57.981Z,1528885077.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:58.018Z,1528885078.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:58.385Z,1528885078.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:58.420Z,1528885078.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:58.781Z,1528885078.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:58.819Z,1528885078.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:59.170Z,1528885079.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:59.188Z,1528885079.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:59.572Z,1528885079.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:59.590Z,1528885079.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:17:59.977Z,1528885079.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:17:59.995Z,1528885079.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:00.381Z,1528885080.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:00.399Z,1528885080.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:00.781Z,1528885080.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:00.799Z,1528885080.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:01.170Z,1528885081.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:01.188Z,1528885081.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:01.572Z,1528885081.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:01.590Z,1528885081.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:01.978Z,1528885081.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:02.000Z,1528885082.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:02.382Z,1528885082.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:02.400Z,1528885082.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:02.782Z,1528885082.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:02.799Z,1528885082.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:03.174Z,1528885083.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:03.192Z,1528885083.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:03.573Z,1528885083.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:03.591Z,1528885083.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:03.983Z,1528885083.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:04.001Z,1528885084.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:04.381Z,1528885084.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:04.400Z,1528885084.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:04.783Z,1528885084.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:04.801Z,1528885084.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:05.176Z,1528885085.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:05.200Z,1528885085.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:05.571Z,1528885085.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:05.603Z,1528885085.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:05.983Z,1528885085.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:06.001Z,1528885086.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:06.380Z,1528885086.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:06.417Z,1528885086.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:06.783Z,1528885086.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:06.801Z,1528885086.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:07.173Z,1528885087.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:07.203Z,1528885087.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:07.567Z,1528885087.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:07.600Z,1528885087.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:07.989Z,1528885087.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:08.012Z,1528885088.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:08.389Z,1528885088.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:08.407Z,1528885088.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:08.789Z,1528885088.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:08.807Z,1528885088.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:09.168Z,1528885089.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:09.219Z,1528885089.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:09.567Z,1528885089.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:09.606Z,1528885089.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:09.990Z,1528885089.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:10.008Z,1528885090.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:10.388Z,1528885090.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:10.407Z,1528885090.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:10.790Z,1528885090.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:10.808Z,1528885090.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:11.168Z,1528885091.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:11.206Z,1528885091.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:11.567Z,1528885091.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:11.600Z,1528885091.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:11.978Z,1528885091.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:12.019Z,1528885092.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:12.388Z,1528885092.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:12.407Z,1528885092.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:12.777Z,1528885092.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:12.812Z,1528885092.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:13.172Z,1528885093.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:13.211Z,1528885093.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:13.563Z,1528885093.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:13.589Z,1528885093.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:13.982Z,1528885093.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:14.019Z,1528885094.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:14.381Z,1528885094.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:14.414Z,1528885094.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:14.793Z,1528885094.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:14.811Z,1528885094.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:15.167Z,1528885095.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:15.202Z,1528885095.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:15.567Z,1528885095.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:15.584Z,1528885095.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:15.981Z,1528885095.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:16.022Z,1528885096.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:16.385Z,1528885096.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:16.412Z,1528885096.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:16.781Z,1528885096.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:16.820Z,1528885096.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:17.170Z,1528885097.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:17.188Z,1528885097.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:17.566Z,1528885097.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:17.588Z,1528885097.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:17.966Z,1528885097.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:17.996Z,1528885097.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:18.377Z,1528885098.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:18.395Z,1528885098.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:18.786Z,1528885098.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:18.820Z,1528885098.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:19.185Z,1528885099.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:19.203Z,1528885099.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:22.286Z,1528885102.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:22.305Z,1528885102.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:22.438Z,1528885102.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:22.483Z,1528885102.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:22.845Z,1528885102.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:22.879Z,1528885102.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:23.249Z,1528885103.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:23.285Z,1528885103.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:23.642Z,1528885103.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:23.659Z,1528885103.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:24.036Z,1528885104.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:24.054Z,1528885104.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:24.434Z,1528885104.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:24.456Z,1528885104.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:24.835Z,1528885104.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:24.867Z,1528885104.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:25.242Z,1528885105.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:25.260Z,1528885105.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:25.643Z,1528885105.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:25.663Z,1528885105.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:26.042Z,1528885106.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:26.060Z,1528885106.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:26.435Z,1528885106.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:26.467Z,1528885106.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:26.834Z,1528885106.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:26.852Z,1528885106.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:27.238Z,1528885107.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:27.256Z,1528885107.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:27.637Z,1528885107.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:27.655Z,1528885107.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:28.042Z,1528885108.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:28.060Z,1528885108.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:28.445Z,1528885108.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:28.463Z,1528885108.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:28.842Z,1528885108.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:28.861Z,1528885108.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:29.237Z,1528885109.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:29.255Z,1528885109.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:29.638Z,1528885109.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:29.656Z,1528885109.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:30.042Z,1528885110.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:30.060Z,1528885110.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:30.442Z,1528885110.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:30.460Z,1528885110.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:30.842Z,1528885110.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:30.860Z,1528885110.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:31.238Z,1528885111.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:31.255Z,1528885111.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:31.635Z,1528885111.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:31.652Z,1528885111.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:32.042Z,1528885112.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:32.060Z,1528885112.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:32.445Z,1528885112.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:32.463Z,1528885112.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:32.843Z,1528885112.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:32.860Z,1528885112.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:33.238Z,1528885113.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:33.256Z,1528885113.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:33.635Z,1528885113.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:33.664Z,1528885113.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:34.042Z,1528885114.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:34.060Z,1528885114.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:34.445Z,1528885114.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:34.463Z,1528885114.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:34.842Z,1528885114.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:34.860Z,1528885114.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:35.234Z,1528885115.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:35.252Z,1528885115.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:35.635Z,1528885115.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:35.657Z,1528885115.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:36.042Z,1528885116.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:36.060Z,1528885116.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:36.447Z,1528885116.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:36.465Z,1528885116.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:36.846Z,1528885116.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:36.863Z,1528885116.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:37.235Z,1528885117.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:37.268Z,1528885117.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:37.634Z,1528885117.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:37.652Z,1528885117.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:38.046Z,1528885118.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:38.063Z,1528885118.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:38.447Z,1528885118.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:38.465Z,1528885118.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:38.847Z,1528885118.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:38.865Z,1528885118.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:39.238Z,1528885119.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:39.255Z,1528885119.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:39.635Z,1528885119.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:39.659Z,1528885119.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:40.047Z,1528885120.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:40.065Z,1528885120.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:40.446Z,1528885120.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:40.465Z,1528885120.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:40.846Z,1528885120.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:40.864Z,1528885120.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:41.236Z,1528885121.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:41.253Z,1528885121.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:41.627Z,1528885121.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:41.665Z,1528885121.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:42.047Z,1528885122.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:42.065Z,1528885122.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:42.452Z,1528885122.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:42.470Z,1528885122.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:42.851Z,1528885122.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:42.869Z,1528885122.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:43.236Z,1528885123.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:43.270Z,1528885123.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:43.627Z,1528885123.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:43.653Z,1528885123.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:44.041Z,1528885124.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:44.075Z,1528885124.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:44.450Z,1528885124.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:44.474Z,1528885124.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:44.841Z,1528885124.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:44.876Z,1528885124.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:45.232Z,1528885125.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:45.273Z,1528885125.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:45.631Z,1528885125.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:45.669Z,1528885125.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:46.045Z,1528885126.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:46.080Z,1528885126.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:46.445Z,1528885126.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:46.480Z,1528885126.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:46.841Z,1528885126.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:46.870Z,1528885126.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:47.232Z,1528885127.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:47.266Z,1528885127.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:47.631Z,1528885127.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:47.649Z,1528885127.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:48.041Z,1528885128.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:48.079Z,1528885128.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:48.449Z,1528885128.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:48.477Z,1528885128.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:48.849Z,1528885128.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:48.876Z,1528885128.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:49.235Z,1528885129.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:49.276Z,1528885129.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:49.631Z,1528885129.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:49.649Z,1528885129.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:50.046Z,1528885130.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:50.080Z,1528885130.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:50.449Z,1528885130.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:50.483Z,1528885130.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:50.853Z,1528885130.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:50.887Z,1528885130.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:51.239Z,1528885131.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:51.256Z,1528885131.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:51.638Z,1528885131.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:51.656Z,1528885131.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:52.044Z,1528885132.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:52.063Z,1528885132.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:52.446Z,1528885132.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:52.463Z,1528885132.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:52.846Z,1528885132.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:52.864Z,1528885132.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:53.240Z,1528885133.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:53.258Z,1528885133.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:53.638Z,1528885133.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:53.656Z,1528885133.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:54.043Z,1528885134.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:54.068Z,1528885134.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:54.448Z,1528885134.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:54.466Z,1528885134.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:54.849Z,1528885134.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:54.872Z,1528885134.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:55.242Z,1528885135.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:55.259Z,1528885135.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:55.627Z,1528885135.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:55.669Z,1528885135.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:56.044Z,1528885136.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:56.062Z,1528885136.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:56.452Z,1528885136.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:56.470Z,1528885136.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:56.848Z,1528885136.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:56.867Z,1528885136.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:57.232Z,1528885137.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:57.264Z,1528885137.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:57.641Z,1528885137.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:57.661Z,1528885137.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:58.048Z,1528885138.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:58.066Z,1528885138.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:58.451Z,1528885138.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:58.470Z,1528885138.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:58.847Z,1528885138.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:58.866Z,1528885138.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:59.227Z,1528885139.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:59.270Z,1528885139.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:18:59.633Z,1528885139.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:18:59.663Z,1528885139.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:00.031Z,1528885140.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:00.073Z,1528885140.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:00.452Z,1528885140.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:00.470Z,1528885140.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:00.841Z,1528885140.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:00.875Z,1528885140.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:01.241Z,1528885141.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:01.276Z,1528885141.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:01.627Z,1528885141.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:01.658Z,1528885141.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:02.027Z,1528885142.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:02.045Z,1528885142.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:02.432Z,1528885142.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:02.466Z,1528885142.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:02.831Z,1528885142.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:02.849Z,1528885142.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:03.249Z,1528885143.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:03.276Z,1528885143.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:03.649Z,1528885143.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:03.678Z,1528885143.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:04.049Z,1528885144.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:04.077Z,1528885144.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:04.438Z,1528885144.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:04.460Z,1528885144.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:04.837Z,1528885144.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:04.855Z,1528885144.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:05.234Z,1528885145.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:05.252Z,1528885145.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:05.637Z,1528885145.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:05.655Z,1528885145.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:06.035Z,1528885146.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:06.066Z,1528885146.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:06.446Z,1528885146.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:06.464Z,1528885146.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:06.845Z,1528885146.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:06.863Z,1528885146.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:07.242Z,1528885147.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:07.260Z,1528885147.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:07.633Z,1528885147.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:07.651Z,1528885147.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:08.035Z,1528885148.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:08.057Z,1528885148.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:08.438Z,1528885148.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:08.456Z,1528885148.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:08.834Z,1528885148.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:08.852Z,1528885148.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:09.242Z,1528885149.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:09.264Z,1528885149.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:09.645Z,1528885149.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:09.663Z,1528885149.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:10.043Z,1528885150.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:10.060Z,1528885150.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:10.431Z,1528885150.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:10.454Z,1528885150.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:10.835Z,1528885150.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:10.867Z,1528885150.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:11.239Z,1528885151.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:11.257Z,1528885151.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:11.638Z,1528885151.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:11.656Z,1528885151.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:12.037Z,1528885152.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:12.055Z,1528885152.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:12.443Z,1528885152.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:12.460Z,1528885152.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:12.846Z,1528885152.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:12.863Z,1528885152.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:13.250Z,1528885153.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:13.268Z,1528885153.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:13.634Z,1528885153.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:13.652Z,1528885153.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:14.035Z,1528885154.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:14.066Z,1528885154.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:14.438Z,1528885154.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:14.455Z,1528885154.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:14.834Z,1528885154.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:14.852Z,1528885154.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:15.270Z,1528885155.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:15.304Z,1528885155.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:15.645Z,1528885155.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:15.663Z,1528885155.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:16.043Z,1528885156.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:16.061Z,1528885156.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:16.435Z,1528885156.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:16.457Z,1528885156.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:16.835Z,1528885156.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:16.867Z,1528885156.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:17.234Z,1528885157.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:17.252Z,1528885157.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:17.638Z,1528885157.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:17.655Z,1528885157.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:18.038Z,1528885158.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:18.055Z,1528885158.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:18.442Z,1528885158.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:18.460Z,1528885158.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:18.849Z,1528885158.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:18.867Z,1528885158.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:19.249Z,1528885159.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:19.267Z,1528885159.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:22.357Z,1528885162.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:22.398Z,1528885162.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:22.401Z,1528885162.401 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T10:14:22.1Z
2018-06-13T10:19:22.401Z,1528885162.401 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T10:19:22.401Z,1528885162.401 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T10:19:22.511Z,1528885162.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:22.548Z,1528885162.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:23.742Z,1528885163.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:23.760Z,1528885163.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:23.882Z,1528885163.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:23.906Z,1528885163.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:24.284Z,1528885164.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:24.301Z,1528885164.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:24.667Z,1528885164.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:24.704Z,1528885164.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:25.067Z,1528885165.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:25.095Z,1528885165.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:25.468Z,1528885165.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:25.495Z,1528885165.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:25.867Z,1528885165.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:25.896Z,1528885165.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:29.035Z,1528885169.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:29.053Z,1528885169.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:29.141Z,1528885169.141 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0160.lzma
2018-06-13T10:19:29.190Z,1528885169.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:29.241Z,1528885169.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:29.586Z,1528885169.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:29.604Z,1528885169.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:29.938Z,1528885169.938 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0160.lzma.bak
2018-06-13T10:19:29.938Z,1528885169.938 [DataOverHttps](INFO): SBD MOMSN=8329045
2018-06-13T10:19:29.967Z,1528885169.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:30.004Z,1528885170.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:31.858Z,1528885171.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:31.899Z,1528885171.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:32.004Z,1528885172.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:32.056Z,1528885172.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:35.170Z,1528885175.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:35.203Z,1528885175.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:35.334Z,1528885175.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:35.376Z,1528885175.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:35.740Z,1528885175.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:35.764Z,1528885175.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:36.128Z,1528885176.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:36.160Z,1528885176.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:36.520Z,1528885176.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:36.555Z,1528885176.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:36.919Z,1528885176.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:36.956Z,1528885176.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:37.345Z,1528885177.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:37.363Z,1528885177.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:37.744Z,1528885177.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:37.768Z,1528885177.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:38.134Z,1528885178.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:38.172Z,1528885178.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:41.254Z,1528885181.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:41.272Z,1528885181.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:41.358Z,1528885181.358 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0161.lzma
2018-06-13T10:19:41.378Z,1528885181.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:41.422Z,1528885181.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:41.802Z,1528885181.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:41.822Z,1528885181.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:42.158Z,1528885182.158 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0161.lzma.bak
2018-06-13T10:19:42.158Z,1528885182.158 [DataOverHttps](INFO): SBD MOMSN=8329047
2018-06-13T10:19:42.222Z,1528885182.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:42.249Z,1528885182.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:44.066Z,1528885184.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:44.084Z,1528885184.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:44.087Z,1528885184.087 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T10:19:44.087Z,1528885184.087 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T10:19:44.087Z,1528885184.087 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T10:19:44.220Z,1528885184.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:44.260Z,1528885184.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:44.616Z,1528885184.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:44.636Z,1528885184.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:47.740Z,1528885187.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:47.767Z,1528885187.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:47.886Z,1528885187.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:47.911Z,1528885187.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:48.305Z,1528885188.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:48.324Z,1528885188.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:48.700Z,1528885188.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:48.718Z,1528885188.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:49.089Z,1528885189.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:49.121Z,1528885189.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:49.479Z,1528885189.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:49.513Z,1528885189.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:49.879Z,1528885189.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:49.919Z,1528885189.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:50.279Z,1528885190.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:50.296Z,1528885190.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:50.680Z,1528885190.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:50.720Z,1528885190.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:51.080Z,1528885191.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:51.097Z,1528885191.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:51.489Z,1528885191.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:51.523Z,1528885191.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:51.897Z,1528885191.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:51.924Z,1528885191.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:52.293Z,1528885192.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:52.327Z,1528885192.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:52.683Z,1528885192.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:52.700Z,1528885192.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:53.084Z,1528885193.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:53.102Z,1528885193.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:53.483Z,1528885193.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:53.501Z,1528885193.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:53.883Z,1528885193.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:53.902Z,1528885193.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:54.294Z,1528885194.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:54.328Z,1528885194.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:54.694Z,1528885194.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:54.711Z,1528885194.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:55.089Z,1528885195.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:55.109Z,1528885195.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:55.486Z,1528885195.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:55.505Z,1528885195.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:55.879Z,1528885195.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:55.914Z,1528885195.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:56.283Z,1528885196.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:56.313Z,1528885196.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:56.678Z,1528885196.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:56.721Z,1528885196.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:57.075Z,1528885197.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:57.112Z,1528885197.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:57.499Z,1528885197.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:57.517Z,1528885197.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:57.897Z,1528885197.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:57.915Z,1528885197.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:58.292Z,1528885198.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:58.316Z,1528885198.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:58.683Z,1528885198.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:58.708Z,1528885198.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:59.083Z,1528885199.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:59.117Z,1528885199.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:59.476Z,1528885199.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:59.512Z,1528885199.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:19:59.879Z,1528885199.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:19:59.916Z,1528885199.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:00.296Z,1528885200.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:00.315Z,1528885200.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:00.695Z,1528885200.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:00.713Z,1528885200.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:01.096Z,1528885201.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:01.114Z,1528885201.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:01.474Z,1528885201.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:01.510Z,1528885201.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:01.879Z,1528885201.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:01.907Z,1528885201.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:02.279Z,1528885202.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:02.313Z,1528885202.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:02.680Z,1528885202.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:02.709Z,1528885202.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:03.079Z,1528885203.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:03.106Z,1528885203.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:03.495Z,1528885203.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:03.513Z,1528885203.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:03.899Z,1528885203.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:03.916Z,1528885203.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:04.291Z,1528885204.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:04.309Z,1528885204.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:04.679Z,1528885204.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:04.715Z,1528885204.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:05.075Z,1528885205.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:05.114Z,1528885205.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:05.480Z,1528885205.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:05.506Z,1528885205.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:05.879Z,1528885205.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:05.905Z,1528885205.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:06.299Z,1528885206.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:06.317Z,1528885206.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:06.699Z,1528885206.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:06.719Z,1528885206.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:07.102Z,1528885207.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:07.183Z,1528885207.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:07.485Z,1528885207.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:07.563Z,1528885207.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:07.882Z,1528885207.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:07.952Z,1528885207.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:08.280Z,1528885208.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:08.342Z,1528885208.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:08.685Z,1528885208.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:08.703Z,1528885208.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:09.084Z,1528885209.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:09.108Z,1528885209.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:09.490Z,1528885209.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:09.508Z,1528885209.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:09.893Z,1528885209.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:09.910Z,1528885209.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:10.297Z,1528885210.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:10.331Z,1528885210.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:10.684Z,1528885210.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:10.701Z,1528885210.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:11.084Z,1528885211.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:11.102Z,1528885211.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:11.484Z,1528885211.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:11.503Z,1528885211.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:11.885Z,1528885211.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:11.903Z,1528885211.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:12.293Z,1528885212.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:12.311Z,1528885212.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:12.693Z,1528885212.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:12.711Z,1528885212.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:13.090Z,1528885213.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:13.107Z,1528885213.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:13.487Z,1528885213.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:13.508Z,1528885213.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:13.886Z,1528885213.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:13.904Z,1528885213.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:14.284Z,1528885214.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:14.302Z,1528885214.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:14.685Z,1528885214.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:14.702Z,1528885214.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:15.088Z,1528885215.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:15.112Z,1528885215.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:15.497Z,1528885215.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:15.515Z,1528885215.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:15.893Z,1528885215.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:15.910Z,1528885215.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:16.290Z,1528885216.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:16.316Z,1528885216.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:16.688Z,1528885216.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:16.706Z,1528885216.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:17.088Z,1528885217.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:17.106Z,1528885217.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:17.486Z,1528885217.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:17.504Z,1528885217.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:17.884Z,1528885217.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:17.902Z,1528885217.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:18.293Z,1528885218.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:18.312Z,1528885218.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:18.697Z,1528885218.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:18.715Z,1528885218.715 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:18.715Z,1528885218.715 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 138
2018-06-13T10:20:18.715Z,1528885218.715 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:20:18.717Z,1528885218.717 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:18.717Z,1528885218.717 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 138
2018-06-13T10:20:18.717Z,1528885218.717 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:20:18.719Z,1528885218.719 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:18.719Z,1528885218.719 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 138
2018-06-13T10:20:18.719Z,1528885218.719 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:20:18.818Z,1528885218.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:20:18.818Z,1528885218.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:20:18.818Z,1528885218.818 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:20:19.095Z,1528885219.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:19.189Z,1528885219.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:20:19.189Z,1528885219.189 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 138
2018-06-13T10:20:19.190Z,1528885219.190 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:20:19.190Z,1528885219.190 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 138
2018-06-13T10:20:19.190Z,1528885219.190 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:20:19.190Z,1528885219.190 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 138
2018-06-13T10:20:19.479Z,1528885219.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:19.515Z,1528885219.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:20:19.516Z,1528885219.516 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:20:19.516Z,1528885219.516 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:20:19.516Z,1528885219.516 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:20:19.517Z,1528885219.517 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:20:19.517Z,1528885219.517 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:20:19.518Z,1528885219.518 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:20:19.518Z,1528885219.518 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:20:19.518Z,1528885219.518 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:20:19.877Z,1528885219.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:19.915Z,1528885219.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:20:19.916Z,1528885219.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:20.284Z,1528885220.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:20.310Z,1528885220.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:20:20.311Z,1528885220.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:20.679Z,1528885220.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:20.711Z,1528885220.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:20:20.712Z,1528885220.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:21.079Z,1528885221.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:21.115Z,1528885221.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:20:21.116Z,1528885221.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:21.494Z,1528885221.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:21.517Z,1528885221.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:20:21.518Z,1528885221.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:21.899Z,1528885221.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:21.923Z,1528885221.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:20:21.924Z,1528885221.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:22.299Z,1528885222.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:22.317Z,1528885222.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:20:22.318Z,1528885222.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:22.679Z,1528885222.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:22.715Z,1528885222.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:20:22.715Z,1528885222.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:23.082Z,1528885223.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:23.110Z,1528885223.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:20:23.111Z,1528885223.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:23.483Z,1528885223.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:23.510Z,1528885223.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:20:23.511Z,1528885223.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:23.887Z,1528885223.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:23.914Z,1528885223.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:20:23.915Z,1528885223.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:24.304Z,1528885224.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:24.322Z,1528885224.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:20:24.323Z,1528885224.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:24.701Z,1528885224.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:24.718Z,1528885224.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:20:24.719Z,1528885224.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:25.094Z,1528885225.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:25.116Z,1528885225.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:20:25.117Z,1528885225.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:25.483Z,1528885225.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:25.511Z,1528885225.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:20:25.512Z,1528885225.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:25.884Z,1528885225.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:25.916Z,1528885225.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:20:25.917Z,1528885225.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:26.280Z,1528885226.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:26.309Z,1528885226.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:20:26.310Z,1528885226.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:26.682Z,1528885226.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:26.710Z,1528885226.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:20:26.711Z,1528885226.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:27.084Z,1528885227.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:27.116Z,1528885227.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:20:27.117Z,1528885227.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:27.499Z,1528885227.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:27.517Z,1528885227.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:20:27.518Z,1528885227.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:27.902Z,1528885227.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:27.925Z,1528885227.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:20:27.926Z,1528885227.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:28.297Z,1528885228.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:28.320Z,1528885228.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:20:28.321Z,1528885228.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:28.684Z,1528885228.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:28.716Z,1528885228.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:20:28.717Z,1528885228.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:29.079Z,1528885229.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:29.119Z,1528885229.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:20:29.120Z,1528885229.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:29.481Z,1528885229.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:29.512Z,1528885229.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:20:29.514Z,1528885229.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:29.882Z,1528885229.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:29.909Z,1528885229.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:20:29.910Z,1528885229.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:30.310Z,1528885230.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:30.333Z,1528885230.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:20:30.334Z,1528885230.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:30.704Z,1528885230.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:30.722Z,1528885230.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:20:30.723Z,1528885230.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:31.093Z,1528885231.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:31.127Z,1528885231.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:20:31.128Z,1528885231.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:31.482Z,1528885231.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:31.521Z,1528885231.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:20:31.522Z,1528885231.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:31.881Z,1528885231.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:31.915Z,1528885231.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T10:20:31.916Z,1528885231.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:32.283Z,1528885232.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:32.300Z,1528885232.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:20:32.321Z,1528885232.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:32.684Z,1528885232.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:32.732Z,1528885232.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:20:32.733Z,1528885232.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:33.086Z,1528885233.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:33.104Z,1528885233.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:20:33.121Z,1528885233.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:33.493Z,1528885233.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:33.527Z,1528885233.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:20:33.528Z,1528885233.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:33.901Z,1528885233.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:33.935Z,1528885233.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T10:20:33.936Z,1528885233.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:34.296Z,1528885234.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:34.334Z,1528885234.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:20:34.335Z,1528885234.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:34.687Z,1528885234.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:34.706Z,1528885234.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:20:34.707Z,1528885234.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:35.088Z,1528885235.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:35.106Z,1528885235.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T10:20:35.107Z,1528885235.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:35.490Z,1528885235.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:35.507Z,1528885235.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:20:35.508Z,1528885235.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:35.886Z,1528885235.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:35.933Z,1528885235.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:20:35.934Z,1528885235.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:36.296Z,1528885236.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:36.336Z,1528885236.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:20:36.337Z,1528885236.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:36.692Z,1528885236.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:36.709Z,1528885236.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:20:36.710Z,1528885236.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:37.093Z,1528885237.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:37.111Z,1528885237.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T10:20:37.112Z,1528885237.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:37.487Z,1528885237.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:37.529Z,1528885237.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:20:37.530Z,1528885237.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:37.882Z,1528885237.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:37.933Z,1528885237.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T10:20:37.934Z,1528885237.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:38.287Z,1528885238.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:38.305Z,1528885238.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:20:38.306Z,1528885238.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:38.685Z,1528885238.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:38.723Z,1528885238.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:39.085Z,1528885239.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:39.133Z,1528885239.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:39.492Z,1528885239.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:39.539Z,1528885239.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:39.895Z,1528885239.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:39.914Z,1528885239.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:40.294Z,1528885240.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:40.313Z,1528885240.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:40.685Z,1528885240.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:40.732Z,1528885240.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:41.086Z,1528885241.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:41.108Z,1528885241.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:41.489Z,1528885241.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:41.507Z,1528885241.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:41.887Z,1528885241.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:41.905Z,1528885241.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:42.294Z,1528885242.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:42.343Z,1528885242.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:42.690Z,1528885242.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:42.732Z,1528885242.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:43.094Z,1528885243.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:43.119Z,1528885243.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:43.486Z,1528885243.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:43.520Z,1528885243.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:43.879Z,1528885243.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:43.920Z,1528885243.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:44.289Z,1528885244.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:44.312Z,1528885244.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:44.694Z,1528885244.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:44.712Z,1528885244.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:47.795Z,1528885247.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:47.820Z,1528885247.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:47.984Z,1528885247.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:48.002Z,1528885248.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:48.383Z,1528885248.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:48.401Z,1528885248.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:48.779Z,1528885248.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:48.798Z,1528885248.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:49.159Z,1528885249.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:49.195Z,1528885249.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:49.560Z,1528885249.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:49.598Z,1528885249.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:49.959Z,1528885249.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:49.976Z,1528885249.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:50.373Z,1528885250.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:50.400Z,1528885250.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:50.773Z,1528885250.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:50.802Z,1528885250.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:51.165Z,1528885251.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:51.199Z,1528885251.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:51.563Z,1528885251.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:51.609Z,1528885251.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:51.962Z,1528885251.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:51.980Z,1528885251.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:52.363Z,1528885252.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:52.380Z,1528885252.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:52.762Z,1528885252.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:52.780Z,1528885252.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:53.162Z,1528885253.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:53.180Z,1528885253.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:53.573Z,1528885253.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:53.611Z,1528885253.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:53.973Z,1528885253.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:53.991Z,1528885253.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:54.374Z,1528885254.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:54.392Z,1528885254.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:54.764Z,1528885254.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:54.782Z,1528885254.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:55.166Z,1528885255.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:55.184Z,1528885255.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:55.559Z,1528885255.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:55.592Z,1528885255.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:55.964Z,1528885255.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:55.982Z,1528885255.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:56.369Z,1528885256.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:56.387Z,1528885256.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:56.773Z,1528885256.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:56.815Z,1528885256.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:57.170Z,1528885257.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:57.192Z,1528885257.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:57.563Z,1528885257.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:57.594Z,1528885257.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:57.966Z,1528885257.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:57.984Z,1528885257.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:58.368Z,1528885258.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:58.392Z,1528885258.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:58.763Z,1528885258.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:58.794Z,1528885258.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:59.163Z,1528885259.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:59.198Z,1528885259.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:59.570Z,1528885259.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:59.592Z,1528885259.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:20:59.973Z,1528885259.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:20:59.991Z,1528885259.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:00.373Z,1528885260.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:00.391Z,1528885260.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:00.765Z,1528885260.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:00.783Z,1528885260.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:01.165Z,1528885261.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:01.183Z,1528885261.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:01.569Z,1528885261.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:01.587Z,1528885261.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:01.966Z,1528885261.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:01.988Z,1528885261.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:02.374Z,1528885262.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:02.396Z,1528885262.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:02.773Z,1528885262.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:02.796Z,1528885262.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:03.174Z,1528885263.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:03.192Z,1528885263.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:03.569Z,1528885263.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:03.592Z,1528885263.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:03.966Z,1528885263.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:03.989Z,1528885263.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:04.365Z,1528885264.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:04.383Z,1528885264.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:04.770Z,1528885264.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:04.788Z,1528885264.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:05.170Z,1528885265.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:05.192Z,1528885265.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:05.574Z,1528885265.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:05.592Z,1528885265.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:05.975Z,1528885265.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:05.992Z,1528885265.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:06.374Z,1528885266.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:06.396Z,1528885266.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:06.765Z,1528885266.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:06.783Z,1528885266.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:07.163Z,1528885267.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:07.193Z,1528885267.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:07.563Z,1528885267.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:07.589Z,1528885267.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:07.962Z,1528885267.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:07.985Z,1528885267.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:08.378Z,1528885268.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:08.396Z,1528885268.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:08.779Z,1528885268.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:08.797Z,1528885268.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:09.175Z,1528885269.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:09.193Z,1528885269.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:09.566Z,1528885269.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:09.597Z,1528885269.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:09.970Z,1528885269.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:09.988Z,1528885269.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:10.364Z,1528885270.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:10.383Z,1528885270.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:10.766Z,1528885270.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:10.784Z,1528885270.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:11.169Z,1528885271.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:11.187Z,1528885271.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:11.578Z,1528885271.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:11.604Z,1528885271.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:11.978Z,1528885271.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:11.000Z,1528885272.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:12.378Z,1528885272.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:12.404Z,1528885272.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:12.767Z,1528885272.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:12.786Z,1528885272.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:13.167Z,1528885273.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:13.186Z,1528885273.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:13.570Z,1528885273.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:13.592Z,1528885273.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:13.964Z,1528885273.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:13.988Z,1528885273.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:14.377Z,1528885274.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:14.395Z,1528885274.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:14.779Z,1528885274.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:14.798Z,1528885274.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:15.178Z,1528885275.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:15.196Z,1528885275.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:15.570Z,1528885275.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:15.588Z,1528885275.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:15.964Z,1528885275.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:15.995Z,1528885275.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:16.369Z,1528885276.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:16.387Z,1528885276.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:16.763Z,1528885276.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:16.791Z,1528885276.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:17.160Z,1528885277.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:17.190Z,1528885277.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:17.570Z,1528885277.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:17.599Z,1528885277.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:17.980Z,1528885277.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:18.004Z,1528885278.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:18.385Z,1528885278.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:18.403Z,1528885278.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:18.763Z,1528885278.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:18.795Z,1528885278.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:19.160Z,1528885279.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:19.195Z,1528885279.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:19.563Z,1528885279.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:19.601Z,1528885279.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:19.964Z,1528885279.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:19.000Z,1528885280.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:20.380Z,1528885280.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:20.398Z,1528885280.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:20.775Z,1528885280.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:20.813Z,1528885280.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:21.173Z,1528885281.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:21.208Z,1528885281.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:21.565Z,1528885281.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:21.583Z,1528885281.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:21.966Z,1528885281.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:21.998Z,1528885281.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:22.361Z,1528885282.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:22.385Z,1528885282.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:22.769Z,1528885282.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:22.787Z,1528885282.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:23.168Z,1528885283.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:23.187Z,1528885283.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:23.581Z,1528885283.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:23.614Z,1528885283.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:23.976Z,1528885283.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:24.010Z,1528885284.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:24.375Z,1528885284.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:24.394Z,1528885284.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:24.768Z,1528885284.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:24.799Z,1528885284.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:25.170Z,1528885285.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:25.188Z,1528885285.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:25.568Z,1528885285.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:25.590Z,1528885285.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:25.968Z,1528885285.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:25.987Z,1528885285.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:26.375Z,1528885286.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:26.415Z,1528885286.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:26.774Z,1528885286.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:26.800Z,1528885286.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:27.173Z,1528885287.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:27.195Z,1528885287.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:27.564Z,1528885287.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:27.591Z,1528885287.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:27.967Z,1528885287.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:28.004Z,1528885288.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:28.369Z,1528885288.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:28.387Z,1528885288.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:28.760Z,1528885288.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:28.811Z,1528885288.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:29.159Z,1528885289.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:29.205Z,1528885289.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:29.574Z,1528885289.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:29.592Z,1528885289.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:29.982Z,1528885289.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:30.004Z,1528885290.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:30.380Z,1528885290.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:30.400Z,1528885290.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:30.759Z,1528885290.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:30.790Z,1528885290.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:31.160Z,1528885291.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:31.191Z,1528885291.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:31.566Z,1528885291.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:31.591Z,1528885291.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:31.960Z,1528885291.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:32.004Z,1528885292.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:32.378Z,1528885292.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:32.396Z,1528885292.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:32.782Z,1528885292.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:32.800Z,1528885292.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:33.170Z,1528885293.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:33.203Z,1528885293.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:33.559Z,1528885293.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:33.604Z,1528885293.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:33.959Z,1528885293.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:34.006Z,1528885294.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:34.359Z,1528885294.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:34.391Z,1528885294.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:34.762Z,1528885294.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:34.800Z,1528885294.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:35.159Z,1528885295.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:35.204Z,1528885295.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:35.576Z,1528885295.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:35.601Z,1528885295.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:35.983Z,1528885295.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:36.008Z,1528885296.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:36.379Z,1528885296.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:36.409Z,1528885296.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:36.759Z,1528885296.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:36.797Z,1528885296.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:37.159Z,1528885297.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:37.196Z,1528885297.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:37.560Z,1528885297.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:37.600Z,1528885297.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:37.960Z,1528885297.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:37.990Z,1528885297.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:38.376Z,1528885298.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:38.412Z,1528885298.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:38.784Z,1528885298.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:38.803Z,1528885298.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:39.165Z,1528885299.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:39.210Z,1528885299.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:39.559Z,1528885299.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:39.590Z,1528885299.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:39.959Z,1528885299.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:39.991Z,1528885299.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:40.359Z,1528885300.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:40.398Z,1528885300.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:40.760Z,1528885300.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:40.805Z,1528885300.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:41.159Z,1528885301.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:41.192Z,1528885301.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:41.579Z,1528885301.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:41.616Z,1528885301.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:41.979Z,1528885301.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:42.001Z,1528885302.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:42.383Z,1528885302.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:42.402Z,1528885302.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:42.759Z,1528885302.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:42.791Z,1528885302.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:43.155Z,1528885303.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:43.191Z,1528885303.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:43.560Z,1528885303.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:43.596Z,1528885303.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:43.959Z,1528885303.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:43.996Z,1528885303.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:44.383Z,1528885304.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:44.401Z,1528885304.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:44.784Z,1528885304.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:44.840Z,1528885304.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:45.179Z,1528885305.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:45.202Z,1528885305.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:45.563Z,1528885305.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:45.595Z,1528885305.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:45.963Z,1528885305.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:45.996Z,1528885305.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:49.083Z,1528885309.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:49.102Z,1528885309.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:49.211Z,1528885309.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:49.255Z,1528885309.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:49.630Z,1528885309.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:49.654Z,1528885309.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:50.027Z,1528885310.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:50.045Z,1528885310.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:50.432Z,1528885310.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:50.450Z,1528885310.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:50.811Z,1528885310.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:50.845Z,1528885310.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:51.208Z,1528885311.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:51.243Z,1528885311.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:51.610Z,1528885311.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:51.643Z,1528885311.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:52.010Z,1528885312.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:52.054Z,1528885312.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:52.428Z,1528885312.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:52.446Z,1528885312.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:52.820Z,1528885312.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:52.858Z,1528885312.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:53.233Z,1528885313.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:53.251Z,1528885313.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:53.610Z,1528885313.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:53.644Z,1528885313.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:54.008Z,1528885314.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:54.026Z,1528885314.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:54.412Z,1528885314.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:54.455Z,1528885314.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:54.814Z,1528885314.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:54.831Z,1528885314.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:55.214Z,1528885315.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:55.231Z,1528885315.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:55.626Z,1528885315.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:55.660Z,1528885315.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:56.024Z,1528885316.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:56.064Z,1528885316.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:56.424Z,1528885316.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:56.467Z,1528885316.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:56.817Z,1528885316.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:56.835Z,1528885316.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:57.214Z,1528885317.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:57.232Z,1528885317.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:57.611Z,1528885317.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:57.647Z,1528885317.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:58.013Z,1528885318.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:58.040Z,1528885318.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:58.422Z,1528885318.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:58.440Z,1528885318.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:58.821Z,1528885318.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:58.839Z,1528885318.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:59.224Z,1528885319.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:59.244Z,1528885319.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:21:59.619Z,1528885319.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:21:59.644Z,1528885319.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:00.015Z,1528885320.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:00.046Z,1528885320.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:00.415Z,1528885320.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:00.449Z,1528885320.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:00.808Z,1528885320.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:00.859Z,1528885320.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:01.207Z,1528885321.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:01.259Z,1528885321.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:01.628Z,1528885321.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:01.663Z,1528885321.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:02.029Z,1528885322.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:02.047Z,1528885322.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:02.422Z,1528885322.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:02.450Z,1528885322.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:02.807Z,1528885322.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:02.845Z,1528885322.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:03.208Z,1528885323.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:03.256Z,1528885323.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:03.610Z,1528885323.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:03.641Z,1528885323.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:04.008Z,1528885324.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:04.052Z,1528885324.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:04.419Z,1528885324.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:04.450Z,1528885324.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:04.790Z,1528885324.790 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T10:22:04.790Z,1528885324.790 [NAL9602] Data Fault, FailCount= 3
2018-06-13T10:22:04.791Z,1528885324.791 [NAL9602](ERROR): Data Fault
2018-06-13T10:22:04.808Z,1528885324.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:04.859Z,1528885324.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:04.941Z,1528885324.941 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T10:22:05.190Z,1528885325.190 [NAL9602](INFO): Powering down
2018-06-13T10:22:05.210Z,1528885325.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:05.259Z,1528885325.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:05.602Z,1528885325.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:05.652Z,1528885325.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:06.005Z,1528885326.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:06.050Z,1528885326.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:06.133Z,1528885326.133 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T10:22:06.133Z,1528885326.133 [NAL9602] No Fault, FailCount= 3
2018-06-13T10:22:06.406Z,1528885326.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:06.445Z,1528885326.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:06.809Z,1528885326.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:06.828Z,1528885326.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:07.210Z,1528885327.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:07.259Z,1528885327.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:07.606Z,1528885327.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:07.656Z,1528885327.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:08.006Z,1528885328.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:08.029Z,1528885328.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:08.412Z,1528885328.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:08.431Z,1528885328.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:08.811Z,1528885328.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:08.863Z,1528885328.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:09.209Z,1528885329.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:09.231Z,1528885329.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:09.611Z,1528885329.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:09.633Z,1528885329.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:10.010Z,1528885330.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:10.031Z,1528885330.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:10.407Z,1528885330.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:10.459Z,1528885330.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:10.810Z,1528885330.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:10.832Z,1528885330.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:11.207Z,1528885331.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:11.231Z,1528885331.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:11.611Z,1528885331.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:11.633Z,1528885331.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:12.010Z,1528885332.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:12.064Z,1528885332.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:12.408Z,1528885332.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:12.425Z,1528885332.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:12.808Z,1528885332.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:12.831Z,1528885332.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:13.215Z,1528885333.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:13.236Z,1528885333.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:13.608Z,1528885333.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:13.637Z,1528885333.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:14.008Z,1528885334.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:14.026Z,1528885334.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:14.412Z,1528885334.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:14.435Z,1528885334.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:14.808Z,1528885334.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:14.835Z,1528885334.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:15.208Z,1528885335.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:15.226Z,1528885335.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:15.612Z,1528885335.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:15.631Z,1528885335.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:16.008Z,1528885336.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:16.037Z,1528885336.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:16.412Z,1528885336.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:16.435Z,1528885336.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:16.811Z,1528885336.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:16.829Z,1528885336.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:17.209Z,1528885337.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:17.227Z,1528885337.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:17.608Z,1528885337.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:17.626Z,1528885337.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:18.012Z,1528885338.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:18.035Z,1528885338.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:18.409Z,1528885338.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:18.427Z,1528885338.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:18.808Z,1528885338.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:18.826Z,1528885338.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:19.212Z,1528885339.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:19.231Z,1528885339.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:19.608Z,1528885339.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:19.631Z,1528885339.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:20.008Z,1528885340.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:20.026Z,1528885340.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:20.413Z,1528885340.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:20.431Z,1528885340.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:20.808Z,1528885340.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:20.825Z,1528885340.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:21.208Z,1528885341.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:21.230Z,1528885341.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:21.612Z,1528885341.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:21.630Z,1528885341.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:22.008Z,1528885342.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:22.025Z,1528885342.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:22.408Z,1528885342.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:22.427Z,1528885342.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:22.812Z,1528885342.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:22.835Z,1528885342.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:23.212Z,1528885343.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:23.229Z,1528885343.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:23.612Z,1528885343.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:23.630Z,1528885343.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:24.011Z,1528885344.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:24.054Z,1528885344.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:24.408Z,1528885344.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:24.426Z,1528885344.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:24.812Z,1528885344.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:24.830Z,1528885344.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:25.214Z,1528885345.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:25.231Z,1528885345.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:25.608Z,1528885345.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:25.626Z,1528885345.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:26.008Z,1528885346.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:26.026Z,1528885346.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:26.416Z,1528885346.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:26.434Z,1528885346.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:26.808Z,1528885346.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:26.826Z,1528885346.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:27.212Z,1528885347.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:27.231Z,1528885347.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:27.611Z,1528885347.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:27.634Z,1528885347.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:28.009Z,1528885348.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:28.032Z,1528885348.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:28.412Z,1528885348.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:28.430Z,1528885348.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:28.811Z,1528885348.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:28.833Z,1528885348.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:29.208Z,1528885349.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:29.226Z,1528885349.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:29.606Z,1528885349.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:29.636Z,1528885349.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:30.011Z,1528885350.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:30.035Z,1528885350.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:30.409Z,1528885350.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:30.432Z,1528885350.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:30.812Z,1528885350.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:30.830Z,1528885350.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:31.210Z,1528885351.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:31.233Z,1528885351.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:31.607Z,1528885351.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:31.625Z,1528885351.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:32.006Z,1528885352.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:32.040Z,1528885352.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:32.410Z,1528885352.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:32.444Z,1528885352.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:32.808Z,1528885352.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:32.826Z,1528885352.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:33.217Z,1528885353.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:33.240Z,1528885353.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:33.610Z,1528885353.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:33.633Z,1528885353.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:34.008Z,1528885354.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:34.032Z,1528885354.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:34.412Z,1528885354.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:34.430Z,1528885354.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:34.818Z,1528885354.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:34.835Z,1528885354.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:35.208Z,1528885355.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:35.225Z,1528885355.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:35.586Z,1528885355.586 [NAL9602](INFO): Powering up NAL9602
2018-06-13T10:22:35.604Z,1528885355.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:35.644Z,1528885355.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:36.006Z,1528885356.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:36.040Z,1528885356.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:36.402Z,1528885356.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:36.439Z,1528885356.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:36.807Z,1528885356.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:36.835Z,1528885356.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:37.206Z,1528885357.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:37.240Z,1528885357.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:37.602Z,1528885357.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:37.642Z,1528885357.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:38.007Z,1528885358.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:38.034Z,1528885358.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:38.406Z,1528885358.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:38.434Z,1528885358.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:38.806Z,1528885358.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:38.835Z,1528885358.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:39.210Z,1528885359.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:39.238Z,1528885359.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:39.607Z,1528885359.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:39.634Z,1528885359.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:40.007Z,1528885360.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:40.034Z,1528885360.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:40.407Z,1528885360.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:40.434Z,1528885360.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:40.807Z,1528885360.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:40.834Z,1528885360.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:41.207Z,1528885361.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:41.235Z,1528885361.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:41.607Z,1528885361.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:41.636Z,1528885361.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:42.007Z,1528885362.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:42.034Z,1528885362.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:42.406Z,1528885362.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:42.435Z,1528885362.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:42.807Z,1528885362.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:42.835Z,1528885362.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:43.209Z,1528885363.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:43.244Z,1528885363.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:43.602Z,1528885363.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:43.640Z,1528885363.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:44.006Z,1528885364.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:44.032Z,1528885364.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:44.410Z,1528885364.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:44.438Z,1528885364.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:44.810Z,1528885364.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:44.838Z,1528885364.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:45.211Z,1528885365.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:45.238Z,1528885365.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:45.610Z,1528885365.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:45.639Z,1528885365.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:46.020Z,1528885366.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:46.049Z,1528885366.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:49.116Z,1528885369.116 [NAL9602](INFO): NAL9602 initialized
2018-06-13T10:22:49.133Z,1528885369.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:49.151Z,1528885369.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:49.287Z,1528885369.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:49.309Z,1528885369.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:49.692Z,1528885369.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:49.710Z,1528885369.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:50.094Z,1528885370.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:50.112Z,1528885370.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:50.481Z,1528885370.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:50.529Z,1528885370.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:50.883Z,1528885370.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:50.906Z,1528885370.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:51.283Z,1528885371.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:51.304Z,1528885371.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:51.684Z,1528885371.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:51.703Z,1528885371.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:52.079Z,1528885372.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:52.125Z,1528885372.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:52.487Z,1528885372.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:52.509Z,1528885372.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:52.892Z,1528885372.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:52.910Z,1528885372.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:53.294Z,1528885373.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:53.312Z,1528885373.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:53.676Z,1528885373.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:53.725Z,1528885373.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:54.079Z,1528885374.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:54.116Z,1528885374.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:54.485Z,1528885374.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:54.507Z,1528885374.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:54.872Z,1528885374.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:54.912Z,1528885374.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:55.292Z,1528885375.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:55.328Z,1528885375.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:55.697Z,1528885375.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:55.741Z,1528885375.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:56.094Z,1528885376.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:56.119Z,1528885376.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:56.475Z,1528885376.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:56.522Z,1528885376.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:56.875Z,1528885376.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:56.906Z,1528885376.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:57.281Z,1528885377.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:57.323Z,1528885377.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:57.685Z,1528885377.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:57.720Z,1528885377.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:58.092Z,1528885378.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:58.123Z,1528885378.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:58.472Z,1528885378.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:58.521Z,1528885378.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:58.875Z,1528885378.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:58.892Z,1528885378.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:59.289Z,1528885379.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:59.338Z,1528885379.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:22:59.687Z,1528885379.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:22:59.715Z,1528885379.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:00.085Z,1528885380.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:00.115Z,1528885380.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:00.476Z,1528885380.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:00.518Z,1528885380.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:00.874Z,1528885380.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:00.892Z,1528885380.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:01.292Z,1528885381.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:01.326Z,1528885381.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:01.693Z,1528885381.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:01.728Z,1528885381.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:02.089Z,1528885382.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:02.123Z,1528885382.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:02.478Z,1528885382.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:02.496Z,1528885382.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:02.878Z,1528885382.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:02.901Z,1528885382.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:03.285Z,1528885383.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:03.304Z,1528885383.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:03.689Z,1528885383.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:03.707Z,1528885383.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:04.090Z,1528885384.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:04.112Z,1528885384.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:04.481Z,1528885384.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:04.504Z,1528885384.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:04.879Z,1528885384.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:04.901Z,1528885384.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:05.289Z,1528885385.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:05.309Z,1528885385.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:05.690Z,1528885385.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:05.716Z,1528885385.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:06.090Z,1528885386.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:06.112Z,1528885386.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:06.480Z,1528885386.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:06.511Z,1528885386.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:06.881Z,1528885386.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:06.899Z,1528885386.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:07.307Z,1528885387.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:07.343Z,1528885387.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:07.695Z,1528885387.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:07.717Z,1528885387.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:08.093Z,1528885388.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:08.140Z,1528885388.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:08.479Z,1528885388.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:08.509Z,1528885388.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:08.875Z,1528885388.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:08.910Z,1528885388.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:09.291Z,1528885389.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:09.314Z,1528885389.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:09.695Z,1528885389.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:09.713Z,1528885389.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:10.096Z,1528885390.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:10.115Z,1528885390.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:10.472Z,1528885390.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:10.507Z,1528885390.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:10.879Z,1528885390.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:10.922Z,1528885390.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:11.296Z,1528885391.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:11.314Z,1528885391.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:11.690Z,1528885391.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:11.708Z,1528885391.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:12.090Z,1528885392.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:12.123Z,1528885392.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:12.476Z,1528885392.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:12.522Z,1528885392.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:12.876Z,1528885392.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:12.910Z,1528885392.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:13.285Z,1528885393.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:13.319Z,1528885393.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:13.689Z,1528885393.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:13.723Z,1528885393.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:14.086Z,1528885394.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:14.127Z,1528885394.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:14.475Z,1528885394.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:14.492Z,1528885394.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:14.879Z,1528885394.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:14.898Z,1528885394.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:15.285Z,1528885395.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:15.303Z,1528885395.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:15.689Z,1528885395.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:15.708Z,1528885395.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:16.089Z,1528885396.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:16.107Z,1528885396.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:16.475Z,1528885396.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:16.498Z,1528885396.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:16.879Z,1528885396.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:16.902Z,1528885396.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:17.290Z,1528885397.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:17.308Z,1528885397.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:17.689Z,1528885397.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:17.707Z,1528885397.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:18.086Z,1528885398.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:18.104Z,1528885398.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:18.480Z,1528885398.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:18.511Z,1528885398.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:18.881Z,1528885398.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:18.899Z,1528885398.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:19.291Z,1528885399.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:19.308Z,1528885399.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:19.696Z,1528885399.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:19.714Z,1528885399.714 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:19.714Z,1528885399.714 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 139
2018-06-13T10:23:19.714Z,1528885399.714 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:23:19.716Z,1528885399.716 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:19.716Z,1528885399.716 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 139
2018-06-13T10:23:19.716Z,1528885399.716 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:23:19.718Z,1528885399.718 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:19.718Z,1528885399.718 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 139
2018-06-13T10:23:19.718Z,1528885399.718 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:23:19.813Z,1528885399.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:23:19.813Z,1528885399.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:23:19.814Z,1528885399.814 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:23:20.090Z,1528885400.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:20.202Z,1528885400.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:23:20.202Z,1528885400.202 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 139
2018-06-13T10:23:20.202Z,1528885400.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:23:20.202Z,1528885400.202 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 139
2018-06-13T10:23:20.203Z,1528885400.203 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:23:20.203Z,1528885400.203 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 139
2018-06-13T10:23:20.471Z,1528885400.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:20.506Z,1528885400.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:23:20.507Z,1528885400.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:23:20.507Z,1528885400.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:23:20.507Z,1528885400.507 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:23:20.508Z,1528885400.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:23:20.508Z,1528885400.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:23:20.508Z,1528885400.508 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:23:20.509Z,1528885400.509 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:23:20.509Z,1528885400.509 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:23:20.871Z,1528885400.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:20.908Z,1528885400.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:23:20.909Z,1528885400.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:21.291Z,1528885401.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:21.309Z,1528885401.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:23:21.310Z,1528885401.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:21.695Z,1528885401.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:21.713Z,1528885401.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:23:21.714Z,1528885401.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:22.096Z,1528885402.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:22.113Z,1528885402.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:23:22.114Z,1528885402.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:22.476Z,1528885402.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:22.508Z,1528885402.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:23:22.508Z,1528885402.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:22.875Z,1528885402.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:22.901Z,1528885402.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:23:22.902Z,1528885402.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:23.293Z,1528885403.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:23.310Z,1528885403.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:23:23.311Z,1528885403.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:23.692Z,1528885403.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:23.709Z,1528885403.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:23:23.710Z,1528885403.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:24.090Z,1528885404.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:24.113Z,1528885404.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:23:24.114Z,1528885404.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:24.477Z,1528885404.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:24.512Z,1528885404.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:23:24.513Z,1528885404.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:24.879Z,1528885404.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:24.906Z,1528885404.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:23:24.907Z,1528885404.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:25.296Z,1528885405.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:25.320Z,1528885405.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:23:25.321Z,1528885405.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:25.695Z,1528885405.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:25.725Z,1528885405.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:23:25.726Z,1528885405.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:26.086Z,1528885406.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:26.120Z,1528885406.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:23:26.121Z,1528885406.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:26.476Z,1528885406.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:26.513Z,1528885406.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:23:26.514Z,1528885406.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:26.876Z,1528885406.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:26.910Z,1528885406.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:23:26.911Z,1528885406.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:27.275Z,1528885407.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:27.316Z,1528885407.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:23:27.321Z,1528885407.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:27.690Z,1528885407.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:27.723Z,1528885407.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:23:27.724Z,1528885407.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:28.094Z,1528885408.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:28.123Z,1528885408.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:23:28.124Z,1528885408.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:28.490Z,1528885408.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:28.524Z,1528885408.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:23:28.524Z,1528885408.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:28.878Z,1528885408.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:28.900Z,1528885408.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:23:28.901Z,1528885408.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:29.279Z,1528885409.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:29.298Z,1528885409.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:23:29.299Z,1528885409.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:29.678Z,1528885409.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:29.696Z,1528885409.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:23:29.697Z,1528885409.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:30.081Z,1528885410.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:30.099Z,1528885410.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:23:30.100Z,1528885410.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:30.489Z,1528885410.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:30.507Z,1528885410.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:23:30.508Z,1528885410.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:30.887Z,1528885410.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:30.912Z,1528885410.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:23:30.929Z,1528885410.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:31.287Z,1528885411.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:31.305Z,1528885411.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:23:31.306Z,1528885411.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:31.683Z,1528885411.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:31.700Z,1528885411.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:23:31.701Z,1528885411.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:32.072Z,1528885412.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:32.108Z,1528885412.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:23:32.110Z,1528885412.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:32.476Z,1528885412.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:32.507Z,1528885412.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:23:32.508Z,1528885412.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:32.876Z,1528885412.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:32.907Z,1528885412.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T10:23:32.908Z,1528885412.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:33.271Z,1528885413.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:33.311Z,1528885413.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:23:33.312Z,1528885413.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:33.693Z,1528885413.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:33.710Z,1528885413.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:23:33.711Z,1528885413.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:34.098Z,1528885414.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:34.115Z,1528885414.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:23:34.116Z,1528885414.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:34.493Z,1528885414.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:34.516Z,1528885414.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:23:34.517Z,1528885414.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:34.875Z,1528885414.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:34.912Z,1528885414.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T10:23:34.913Z,1528885414.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:35.275Z,1528885415.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:35.316Z,1528885415.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:23:35.321Z,1528885415.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:35.672Z,1528885415.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:35.713Z,1528885415.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:23:35.714Z,1528885415.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:36.076Z,1528885416.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:36.113Z,1528885416.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T10:23:36.114Z,1528885416.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:36.489Z,1528885416.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:36.519Z,1528885416.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:23:36.520Z,1528885416.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:36.885Z,1528885416.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:36.916Z,1528885416.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:23:36.917Z,1528885416.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:37.281Z,1528885417.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:37.319Z,1528885417.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:23:37.320Z,1528885417.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:37.675Z,1528885417.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:37.705Z,1528885417.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:23:37.706Z,1528885417.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:38.075Z,1528885418.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:38.093Z,1528885418.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T10:23:38.094Z,1528885418.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:38.479Z,1528885418.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:38.496Z,1528885418.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:23:38.497Z,1528885418.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:38.879Z,1528885418.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:38.897Z,1528885418.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T10:23:38.898Z,1528885418.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:39.280Z,1528885419.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:39.297Z,1528885419.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:23:39.298Z,1528885419.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:39.685Z,1528885419.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:39.703Z,1528885419.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T10:23:39.704Z,1528885419.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:40.089Z,1528885420.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:40.108Z,1528885420.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:40.482Z,1528885420.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:40.504Z,1528885420.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:40.879Z,1528885420.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:40.913Z,1528885420.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:41.282Z,1528885421.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:41.300Z,1528885421.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:41.675Z,1528885421.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:41.699Z,1528885421.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:42.079Z,1528885422.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:42.101Z,1528885422.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:42.489Z,1528885422.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:42.508Z,1528885422.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:42.887Z,1528885422.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:42.904Z,1528885422.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:43.286Z,1528885423.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:43.308Z,1528885423.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:43.682Z,1528885423.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:43.700Z,1528885423.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:44.077Z,1528885424.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:44.095Z,1528885424.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:44.479Z,1528885424.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:44.509Z,1528885424.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:44.883Z,1528885424.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:44.901Z,1528885424.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:45.281Z,1528885425.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:45.299Z,1528885425.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:45.690Z,1528885425.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:45.708Z,1528885425.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:46.090Z,1528885426.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:46.108Z,1528885426.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:46.490Z,1528885426.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:46.515Z,1528885426.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:46.879Z,1528885426.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:46.902Z,1528885426.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:47.300Z,1528885427.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:47.700Z,1528885427.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:50.812Z,1528885430.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:50.848Z,1528885430.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:50.983Z,1528885430.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:51.009Z,1528885431.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:51.384Z,1528885431.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:51.420Z,1528885431.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:51.773Z,1528885431.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:51.815Z,1528885431.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:52.155Z,1528885432.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:52.200Z,1528885432.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:52.560Z,1528885432.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:52.602Z,1528885432.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:52.955Z,1528885432.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:52.972Z,1528885432.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:53.369Z,1528885433.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:53.407Z,1528885433.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:53.773Z,1528885433.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:53.811Z,1528885433.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:54.207Z,1528885434.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:54.609Z,1528885434.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:54.979Z,1528885434.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:55.412Z,1528885435.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:55.792Z,1528885435.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:56.222Z,1528885436.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:56.584Z,1528885436.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:56.980Z,1528885436.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:57.408Z,1528885437.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:57.770Z,1528885437.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:57.821Z,1528885437.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:58.170Z,1528885438.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:58.189Z,1528885438.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:58.563Z,1528885438.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:58.596Z,1528885438.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:58.966Z,1528885438.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:58.988Z,1528885438.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:59.375Z,1528885439.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:59.392Z,1528885439.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:23:59.774Z,1528885439.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:23:59.793Z,1528885439.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:00.175Z,1528885440.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:00.198Z,1528885440.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:00.567Z,1528885440.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:00.590Z,1528885440.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:00.963Z,1528885440.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:00.992Z,1528885440.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:01.376Z,1528885441.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:01.403Z,1528885441.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:01.778Z,1528885441.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:01.803Z,1528885441.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:02.175Z,1528885442.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:02.198Z,1528885442.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:02.567Z,1528885442.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:02.585Z,1528885442.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:02.965Z,1528885442.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:02.983Z,1528885442.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:03.375Z,1528885443.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:03.396Z,1528885443.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:03.778Z,1528885443.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:03.801Z,1528885443.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:04.175Z,1528885444.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:04.193Z,1528885444.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:04.563Z,1528885444.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:04.590Z,1528885444.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:04.959Z,1528885444.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:04.992Z,1528885444.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:05.380Z,1528885445.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:05.403Z,1528885445.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:05.779Z,1528885445.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:05.798Z,1528885445.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:06.179Z,1528885446.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:06.201Z,1528885446.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:06.560Z,1528885446.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:06.591Z,1528885446.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:06.959Z,1528885446.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:06.987Z,1528885446.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:07.378Z,1528885447.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:07.411Z,1528885447.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:07.780Z,1528885447.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:07.798Z,1528885447.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:08.176Z,1528885448.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:08.204Z,1528885448.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:08.560Z,1528885448.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:08.602Z,1528885448.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:08.959Z,1528885448.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:08.986Z,1528885448.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:09.376Z,1528885449.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:09.394Z,1528885449.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:09.775Z,1528885449.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:09.793Z,1528885449.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:10.176Z,1528885450.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:10.199Z,1528885450.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:10.559Z,1528885450.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:10.601Z,1528885450.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:10.959Z,1528885450.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:10.988Z,1528885450.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:11.376Z,1528885451.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:11.398Z,1528885451.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:11.783Z,1528885451.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:11.807Z,1528885451.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:12.181Z,1528885452.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:12.199Z,1528885452.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:12.560Z,1528885452.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:12.593Z,1528885452.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:12.959Z,1528885452.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:12.987Z,1528885452.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:13.381Z,1528885453.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:13.403Z,1528885453.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:13.780Z,1528885453.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:13.798Z,1528885453.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:14.178Z,1528885454.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:14.195Z,1528885454.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:14.560Z,1528885454.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:14.596Z,1528885454.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:14.959Z,1528885454.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:14.987Z,1528885454.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:15.380Z,1528885455.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:15.398Z,1528885455.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:15.781Z,1528885455.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:15.804Z,1528885455.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:16.176Z,1528885456.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:16.201Z,1528885456.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:16.560Z,1528885456.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:16.594Z,1528885456.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:16.960Z,1528885456.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:16.993Z,1528885456.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:17.375Z,1528885457.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:17.394Z,1528885457.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:17.773Z,1528885457.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:17.796Z,1528885457.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:18.182Z,1528885458.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:18.200Z,1528885458.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:18.560Z,1528885458.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:18.596Z,1528885458.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:18.959Z,1528885458.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:18.996Z,1528885458.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:19.386Z,1528885459.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:19.404Z,1528885459.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:19.768Z,1528885459.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:19.799Z,1528885459.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:20.174Z,1528885460.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:20.198Z,1528885460.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:20.560Z,1528885460.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:20.590Z,1528885460.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:20.955Z,1528885460.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:20.990Z,1528885460.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:21.370Z,1528885461.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:21.399Z,1528885461.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:21.785Z,1528885461.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:21.804Z,1528885461.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:22.170Z,1528885462.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:22.198Z,1528885462.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:22.559Z,1528885462.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:22.598Z,1528885462.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:22.960Z,1528885462.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:22.000Z,1528885463.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:23.355Z,1528885463.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:23.392Z,1528885463.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:23.770Z,1528885463.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:23.805Z,1528885463.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:24.174Z,1528885464.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:24.204Z,1528885464.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:24.566Z,1528885464.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:24.605Z,1528885464.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:24.963Z,1528885464.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:25.008Z,1528885465.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:25.362Z,1528885465.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:25.380Z,1528885465.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:25.762Z,1528885465.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:25.781Z,1528885465.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:26.164Z,1528885466.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:26.188Z,1528885466.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:26.574Z,1528885466.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:26.592Z,1528885466.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:26.969Z,1528885466.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:26.987Z,1528885466.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:27.370Z,1528885467.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:27.387Z,1528885467.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:27.765Z,1528885467.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:27.783Z,1528885467.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:28.158Z,1528885468.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:28.188Z,1528885468.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:28.563Z,1528885468.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:28.596Z,1528885468.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:28.966Z,1528885468.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:28.989Z,1528885468.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:29.355Z,1528885469.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:29.389Z,1528885469.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:29.775Z,1528885469.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:29.793Z,1528885469.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:30.180Z,1528885470.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:30.198Z,1528885470.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:30.574Z,1528885470.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:30.591Z,1528885470.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:30.959Z,1528885470.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:30.988Z,1528885470.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:31.359Z,1528885471.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:31.389Z,1528885471.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:31.760Z,1528885471.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:31.787Z,1528885471.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:32.159Z,1528885472.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:32.192Z,1528885472.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:32.576Z,1528885472.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:32.601Z,1528885472.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:32.979Z,1528885472.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:32.998Z,1528885472.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:33.380Z,1528885473.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:33.404Z,1528885473.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:33.759Z,1528885473.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:33.790Z,1528885473.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:34.159Z,1528885474.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:34.196Z,1528885474.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:34.559Z,1528885474.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:34.595Z,1528885474.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:34.960Z,1528885474.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:34.992Z,1528885474.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:35.360Z,1528885475.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:35.392Z,1528885475.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:35.776Z,1528885475.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:35.794Z,1528885475.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:36.177Z,1528885476.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:36.195Z,1528885476.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:36.565Z,1528885476.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:36.600Z,1528885476.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:36.959Z,1528885476.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:36.992Z,1528885476.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:37.359Z,1528885477.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:37.398Z,1528885477.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:37.760Z,1528885477.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:37.798Z,1528885477.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:38.163Z,1528885478.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:38.205Z,1528885478.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:38.573Z,1528885478.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:38.603Z,1528885478.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:38.969Z,1528885478.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:39.004Z,1528885479.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:39.369Z,1528885479.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:39.406Z,1528885479.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:39.759Z,1528885479.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:39.777Z,1528885479.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:40.160Z,1528885480.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:40.184Z,1528885480.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:40.563Z,1528885480.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:40.581Z,1528885480.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:40.963Z,1528885480.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:40.988Z,1528885480.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:41.362Z,1528885481.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:41.380Z,1528885481.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:41.773Z,1528885481.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:41.791Z,1528885481.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:42.174Z,1528885482.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:42.192Z,1528885482.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:42.570Z,1528885482.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:42.588Z,1528885482.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:42.964Z,1528885482.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:42.982Z,1528885482.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:43.365Z,1528885483.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:43.383Z,1528885483.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:43.762Z,1528885483.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:43.779Z,1528885483.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:44.163Z,1528885484.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:44.189Z,1528885484.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:44.578Z,1528885484.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:44.616Z,1528885484.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:44.623Z,1528885484.623 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T10:24:44.623Z,1528885484.623 [Default:CheckIn:C.Wait] Stopped
2018-06-13T10:24:44.623Z,1528885484.623 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T10:24:44.623Z,1528885484.623 [Default:CheckIn:D] Running Loop=1
2018-06-13T10:24:44.978Z,1528885484.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:45.017Z,1528885485.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:45.025Z,1528885485.025 [Default:CheckIn:D] Stopped
2018-06-13T10:24:45.025Z,1528885485.025 [Default:CheckIn:E] Running Loop=1
2018-06-13T10:24:48.097Z,1528885488.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:48.132Z,1528885488.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:48.135Z,1528885488.135 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 417.526270 min 
2018-06-13T10:24:48.135Z,1528885488.135 [Default:CheckIn:E] Stopped
2018-06-13T10:24:48.135Z,1528885488.135 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T10:24:48.135Z,1528885488.135 [Default:CheckIn] Stopped
2018-06-13T10:24:48.135Z,1528885488.135 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T10:24:48.136Z,1528885488.136 [Default:CheckIn](INFO): Running loop #41
2018-06-13T10:24:48.136Z,1528885488.136 [Default:CheckIn] Running Loop=41
2018-06-13T10:24:48.136Z,1528885488.136 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T10:24:48.136Z,1528885488.136 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T10:24:48.251Z,1528885488.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:48.284Z,1528885488.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:48.643Z,1528885488.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:48.683Z,1528885488.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:49.047Z,1528885489.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:49.094Z,1528885489.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:49.453Z,1528885489.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:49.472Z,1528885489.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:49.853Z,1528885489.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:49.876Z,1528885489.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:50.255Z,1528885490.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:50.289Z,1528885490.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:50.639Z,1528885490.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:50.680Z,1528885490.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:51.045Z,1528885491.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:51.063Z,1528885491.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:51.453Z,1528885491.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:51.477Z,1528885491.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:51.853Z,1528885491.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:51.875Z,1528885491.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:52.250Z,1528885492.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:52.276Z,1528885492.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:52.647Z,1528885492.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:52.665Z,1528885492.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:53.039Z,1528885493.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:53.063Z,1528885493.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:53.454Z,1528885493.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:53.477Z,1528885493.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:53.855Z,1528885493.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:53.873Z,1528885493.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:54.254Z,1528885494.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:54.273Z,1528885494.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:54.646Z,1528885494.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:54.664Z,1528885494.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:55.047Z,1528885495.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:55.071Z,1528885495.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:55.455Z,1528885495.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:55.473Z,1528885495.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:55.854Z,1528885495.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:55.872Z,1528885495.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:56.253Z,1528885496.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:56.279Z,1528885496.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:56.647Z,1528885496.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:56.667Z,1528885496.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:57.042Z,1528885497.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:57.072Z,1528885497.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:57.461Z,1528885497.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:57.479Z,1528885497.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:57.856Z,1528885497.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:57.875Z,1528885497.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:58.260Z,1528885498.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:58.282Z,1528885498.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:58.640Z,1528885498.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:58.671Z,1528885498.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:59.039Z,1528885499.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:59.067Z,1528885499.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:59.454Z,1528885499.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:59.490Z,1528885499.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:24:59.861Z,1528885499.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:24:59.884Z,1528885499.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:00.256Z,1528885500.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:00.274Z,1528885500.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:00.640Z,1528885500.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:00.670Z,1528885500.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:01.039Z,1528885501.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:01.073Z,1528885501.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:01.457Z,1528885501.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:01.480Z,1528885501.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:01.860Z,1528885501.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:01.878Z,1528885501.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:02.261Z,1528885502.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:02.279Z,1528885502.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:02.635Z,1528885502.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:02.670Z,1528885502.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:03.039Z,1528885503.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:03.083Z,1528885503.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:03.453Z,1528885503.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:03.483Z,1528885503.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:03.853Z,1528885503.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:03.888Z,1528885503.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:04.249Z,1528885504.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:04.276Z,1528885504.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:04.641Z,1528885504.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:04.675Z,1528885504.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:05.039Z,1528885505.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:05.056Z,1528885505.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:05.453Z,1528885505.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:05.487Z,1528885505.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:05.857Z,1528885505.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:05.886Z,1528885505.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:06.253Z,1528885506.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:06.292Z,1528885506.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:06.644Z,1528885506.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:06.663Z,1528885506.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:07.043Z,1528885507.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:07.061Z,1528885507.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:07.446Z,1528885507.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:07.464Z,1528885507.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:07.854Z,1528885507.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:07.872Z,1528885507.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:08.254Z,1528885508.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:08.272Z,1528885508.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:08.646Z,1528885508.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:08.665Z,1528885508.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:09.045Z,1528885509.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:09.064Z,1528885509.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:09.455Z,1528885509.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:09.474Z,1528885509.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:09.855Z,1528885509.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:09.873Z,1528885509.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:10.256Z,1528885510.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:10.274Z,1528885510.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:10.664Z,1528885510.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:11.060Z,1528885511.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:11.475Z,1528885511.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:11.873Z,1528885511.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:12.273Z,1528885512.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:12.665Z,1528885512.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:13.066Z,1528885513.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:13.474Z,1528885513.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:13.877Z,1528885513.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:14.284Z,1528885514.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:14.672Z,1528885514.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:15.065Z,1528885515.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:15.452Z,1528885515.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:15.883Z,1528885515.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:16.279Z,1528885516.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:16.678Z,1528885516.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:17.057Z,1528885517.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:17.460Z,1528885517.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:17.860Z,1528885517.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:18.261Z,1528885518.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:18.687Z,1528885518.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:19.049Z,1528885519.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:19.067Z,1528885519.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:19.453Z,1528885519.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:19.471Z,1528885519.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:19.844Z,1528885519.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:19.862Z,1528885519.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:20.244Z,1528885520.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:20.263Z,1528885520.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:20.639Z,1528885520.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:20.670Z,1528885520.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:21.047Z,1528885521.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:21.065Z,1528885521.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:21.442Z,1528885521.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:21.464Z,1528885521.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:21.850Z,1528885521.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:21.868Z,1528885521.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:22.253Z,1528885522.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:22.271Z,1528885522.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:22.653Z,1528885522.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:22.671Z,1528885522.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:23.045Z,1528885523.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:23.063Z,1528885523.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:23.444Z,1528885523.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:23.462Z,1528885523.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:23.845Z,1528885523.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:23.863Z,1528885523.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:24.245Z,1528885524.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:24.268Z,1528885524.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:24.649Z,1528885524.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:24.667Z,1528885524.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:25.051Z,1528885525.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:25.069Z,1528885525.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:25.451Z,1528885525.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:25.468Z,1528885525.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:25.845Z,1528885525.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:25.863Z,1528885525.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:26.246Z,1528885526.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:26.263Z,1528885526.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:26.646Z,1528885526.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:26.664Z,1528885526.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:27.043Z,1528885527.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:27.075Z,1528885527.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:27.446Z,1528885527.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:27.463Z,1528885527.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:27.851Z,1528885527.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:27.869Z,1528885527.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:28.253Z,1528885528.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:28.271Z,1528885528.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:28.652Z,1528885528.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:28.669Z,1528885528.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:29.045Z,1528885529.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:29.063Z,1528885529.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:29.444Z,1528885529.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:29.462Z,1528885529.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:29.848Z,1528885529.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:29.865Z,1528885529.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:30.245Z,1528885530.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:30.263Z,1528885530.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:30.650Z,1528885530.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:30.668Z,1528885530.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:31.053Z,1528885531.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:31.070Z,1528885531.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:31.454Z,1528885531.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:31.471Z,1528885531.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:31.843Z,1528885531.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:31.872Z,1528885531.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:32.246Z,1528885532.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:32.263Z,1528885532.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:32.646Z,1528885532.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:32.664Z,1528885532.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:33.043Z,1528885533.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:33.066Z,1528885533.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:33.446Z,1528885533.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:33.464Z,1528885533.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:33.851Z,1528885533.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:33.869Z,1528885533.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:34.253Z,1528885534.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:34.271Z,1528885534.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:34.654Z,1528885534.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:34.672Z,1528885534.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:35.046Z,1528885535.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:35.063Z,1528885535.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:35.443Z,1528885535.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:35.473Z,1528885535.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:35.848Z,1528885535.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:35.866Z,1528885535.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:36.246Z,1528885536.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:36.268Z,1528885536.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:36.655Z,1528885536.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:36.680Z,1528885536.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:37.055Z,1528885537.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:37.080Z,1528885537.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:37.455Z,1528885537.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:37.473Z,1528885537.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:37.850Z,1528885537.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:37.868Z,1528885537.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:38.243Z,1528885538.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:38.272Z,1528885538.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:38.646Z,1528885538.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:38.664Z,1528885538.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:39.044Z,1528885539.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:39.074Z,1528885539.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:39.446Z,1528885539.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:39.479Z,1528885539.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:39.855Z,1528885539.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:39.872Z,1528885539.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:40.260Z,1528885540.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:40.277Z,1528885540.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:40.660Z,1528885540.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:40.684Z,1528885540.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:41.045Z,1528885541.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:41.068Z,1528885541.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:41.445Z,1528885541.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:41.464Z,1528885541.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:41.835Z,1528885541.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:41.865Z,1528885541.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:42.245Z,1528885542.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:42.267Z,1528885542.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:42.656Z,1528885542.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:42.680Z,1528885542.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:43.061Z,1528885543.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:43.079Z,1528885543.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:43.459Z,1528885543.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:43.477Z,1528885543.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:43.843Z,1528885543.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:43.866Z,1528885543.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:44.246Z,1528885544.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:44.271Z,1528885544.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:44.636Z,1528885544.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:44.666Z,1528885544.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:45.047Z,1528885545.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:45.065Z,1528885545.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:48.157Z,1528885548.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:48.175Z,1528885548.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:48.330Z,1528885548.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:48.372Z,1528885548.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:48.729Z,1528885548.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:48.760Z,1528885548.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:49.129Z,1528885549.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:49.161Z,1528885549.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:49.510Z,1528885549.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:49.528Z,1528885549.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:49.911Z,1528885549.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:49.929Z,1528885549.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:50.312Z,1528885550.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:50.330Z,1528885550.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:50.718Z,1528885550.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:50.736Z,1528885550.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:51.129Z,1528885551.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:51.173Z,1528885551.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:51.521Z,1528885551.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:51.539Z,1528885551.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:51.910Z,1528885551.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:51.928Z,1528885551.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:52.312Z,1528885552.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:52.352Z,1528885552.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:52.715Z,1528885552.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:52.733Z,1528885552.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:53.114Z,1528885553.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:53.136Z,1528885553.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:53.519Z,1528885553.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:25:53.536Z,1528885553.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:53.944Z,1528885553.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:54.337Z,1528885554.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:54.731Z,1528885554.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:55.136Z,1528885555.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:55.546Z,1528885555.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:55.941Z,1528885555.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:56.344Z,1528885556.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:56.720Z,1528885556.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:57.133Z,1528885557.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:57.525Z,1528885557.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:57.947Z,1528885557.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:58.355Z,1528885558.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:58.759Z,1528885558.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:59.136Z,1528885559.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:59.530Z,1528885559.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:25:59.942Z,1528885559.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:00.330Z,1528885560.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:00.740Z,1528885560.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:01.140Z,1528885561.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:01.535Z,1528885561.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:01.932Z,1528885561.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:02.331Z,1528885562.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:02.739Z,1528885562.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:03.141Z,1528885563.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:03.540Z,1528885563.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:03.942Z,1528885563.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:04.344Z,1528885564.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:04.746Z,1528885564.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:05.138Z,1528885565.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:05.542Z,1528885565.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:05.939Z,1528885565.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:06.344Z,1528885566.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:06.745Z,1528885566.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:07.149Z,1528885567.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:07.541Z,1528885567.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:07.940Z,1528885567.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:08.339Z,1528885568.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:08.741Z,1528885568.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:09.141Z,1528885569.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:09.542Z,1528885569.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:09.950Z,1528885569.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:10.352Z,1528885570.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:10.755Z,1528885570.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:11.124Z,1528885571.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:11.529Z,1528885571.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:11.930Z,1528885571.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:12.324Z,1528885572.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:12.755Z,1528885572.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:13.139Z,1528885573.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:13.536Z,1528885573.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:13.930Z,1528885573.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:14.332Z,1528885574.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:14.729Z,1528885574.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:15.129Z,1528885575.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:15.531Z,1528885575.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:15.936Z,1528885575.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:16.339Z,1528885576.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:16.739Z,1528885576.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:17.128Z,1528885577.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:17.530Z,1528885577.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:17.944Z,1528885577.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:18.329Z,1528885578.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:18.736Z,1528885578.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:19.139Z,1528885579.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:19.535Z,1528885579.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:19.936Z,1528885579.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:20.332Z,1528885580.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:20.728Z,1528885580.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:20.728Z,1528885580.728 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 140
2018-06-13T10:26:20.728Z,1528885580.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:26:20.730Z,1528885580.730 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:20.731Z,1528885580.731 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 140
2018-06-13T10:26:20.731Z,1528885580.731 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:26:20.732Z,1528885580.732 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:20.732Z,1528885580.732 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 140
2018-06-13T10:26:20.732Z,1528885580.732 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:26:20.805Z,1528885580.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:26:20.805Z,1528885580.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:26:20.806Z,1528885580.806 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:26:21.221Z,1528885581.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:26:21.221Z,1528885581.221 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 140
2018-06-13T10:26:21.222Z,1528885581.222 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:26:21.222Z,1528885581.222 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 140
2018-06-13T10:26:21.222Z,1528885581.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:26:21.222Z,1528885581.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 140
2018-06-13T10:26:21.543Z,1528885581.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:26:21.543Z,1528885581.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:26:21.544Z,1528885581.544 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:26:21.544Z,1528885581.544 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:26:21.544Z,1528885581.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:26:21.545Z,1528885581.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:26:21.545Z,1528885581.545 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:26:21.546Z,1528885581.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:26:21.546Z,1528885581.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:26:21.938Z,1528885581.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:26:21.939Z,1528885581.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:22.345Z,1528885582.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:26:22.346Z,1528885582.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:22.746Z,1528885582.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:26:22.747Z,1528885582.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:23.142Z,1528885583.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:26:23.143Z,1528885583.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:23.536Z,1528885583.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:26:23.537Z,1528885583.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:23.937Z,1528885583.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:26:23.938Z,1528885583.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:24.342Z,1528885584.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:26:24.343Z,1528885584.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:24.743Z,1528885584.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:26:24.744Z,1528885584.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:25.160Z,1528885585.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:26:25.165Z,1528885585.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:25.539Z,1528885585.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:26:25.540Z,1528885585.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:25.948Z,1528885585.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:26:25.949Z,1528885585.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:26.341Z,1528885586.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:26:26.342Z,1528885586.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:26.745Z,1528885586.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:26:26.746Z,1528885586.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:27.141Z,1528885587.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:26:27.142Z,1528885587.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:27.524Z,1528885587.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:26:27.526Z,1528885587.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:27.954Z,1528885587.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:26:27.955Z,1528885587.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:28.351Z,1528885588.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:26:28.352Z,1528885588.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:28.754Z,1528885588.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:26:28.755Z,1528885588.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:29.152Z,1528885589.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:26:29.157Z,1528885589.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:29.528Z,1528885589.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:26:29.528Z,1528885589.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:29.936Z,1528885589.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:26:29.957Z,1528885589.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:30.329Z,1528885590.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:26:30.330Z,1528885590.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:30.755Z,1528885590.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:26:30.756Z,1528885590.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:31.163Z,1528885591.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:26:31.164Z,1528885591.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:31.537Z,1528885591.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:26:31.538Z,1528885591.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:31.946Z,1528885591.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:26:31.946Z,1528885591.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:32.332Z,1528885592.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:26:32.333Z,1528885592.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:32.728Z,1528885592.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:26:32.729Z,1528885592.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:33.132Z,1528885593.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:26:33.132Z,1528885593.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:33.537Z,1528885593.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:26:33.538Z,1528885593.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:33.948Z,1528885593.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T10:26:33.949Z,1528885593.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:34.344Z,1528885594.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:26:34.345Z,1528885594.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:34.741Z,1528885594.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:26:34.742Z,1528885594.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:35.132Z,1528885595.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:26:35.133Z,1528885595.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:35.532Z,1528885595.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:26:35.533Z,1528885595.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:35.935Z,1528885595.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T10:26:35.935Z,1528885595.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:36.328Z,1528885596.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:26:36.329Z,1528885596.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:36.741Z,1528885596.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:26:36.742Z,1528885596.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:37.144Z,1528885597.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T10:26:37.146Z,1528885597.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:37.541Z,1528885597.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:26:37.542Z,1528885597.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:37.932Z,1528885597.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:26:37.933Z,1528885597.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:38.341Z,1528885598.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:26:38.342Z,1528885598.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:38.740Z,1528885598.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:26:38.741Z,1528885598.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:39.142Z,1528885599.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T10:26:39.143Z,1528885599.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:39.540Z,1528885599.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:26:39.541Z,1528885599.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:39.938Z,1528885599.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T10:26:39.939Z,1528885599.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:40.346Z,1528885600.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:26:40.347Z,1528885600.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:40.755Z,1528885600.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:41.140Z,1528885601.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:41.541Z,1528885601.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:41.925Z,1528885601.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:42.324Z,1528885602.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:42.754Z,1528885602.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:43.152Z,1528885603.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:43.559Z,1528885603.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:43.924Z,1528885603.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:44.330Z,1528885604.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:44.727Z,1528885604.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:45.128Z,1528885605.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:48.259Z,1528885608.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:48.425Z,1528885608.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:48.812Z,1528885608.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:49.210Z,1528885609.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:49.584Z,1528885609.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:49.997Z,1528885609.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:50.390Z,1528885610.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:50.818Z,1528885610.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:51.215Z,1528885611.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:51.616Z,1528885611.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:51.991Z,1528885611.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:52.392Z,1528885612.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:52.792Z,1528885612.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:53.200Z,1528885613.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:53.591Z,1528885613.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:54.023Z,1528885614.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:54.403Z,1528885614.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:54.799Z,1528885614.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:55.195Z,1528885615.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:55.593Z,1528885615.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:55.993Z,1528885615.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:56.395Z,1528885616.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:56.800Z,1528885616.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:57.203Z,1528885617.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:57.603Z,1528885617.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:57.992Z,1528885617.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:58.393Z,1528885618.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:58.796Z,1528885618.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:59.196Z,1528885619.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:26:59.594Z,1528885619.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:00.003Z,1528885620.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:00.399Z,1528885620.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:00.799Z,1528885620.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:01.196Z,1528885621.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:01.590Z,1528885621.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:01.995Z,1528885621.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:02.394Z,1528885622.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:02.799Z,1528885622.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:03.203Z,1528885623.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:03.603Z,1528885623.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:03.993Z,1528885623.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:04.393Z,1528885624.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:04.795Z,1528885624.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:05.195Z,1528885625.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:05.593Z,1528885625.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:06.004Z,1528885626.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:06.399Z,1528885626.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:06.799Z,1528885626.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:07.195Z,1528885627.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:07.594Z,1528885627.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:07.995Z,1528885627.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:08.396Z,1528885628.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:08.800Z,1528885628.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:09.203Z,1528885629.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:09.608Z,1528885629.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:09.990Z,1528885629.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:10.396Z,1528885630.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:10.797Z,1528885630.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:11.202Z,1528885631.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:11.607Z,1528885631.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:12.008Z,1528885632.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:12.400Z,1528885632.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:12.802Z,1528885632.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:13.196Z,1528885633.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:13.592Z,1528885633.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:14.006Z,1528885634.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:14.395Z,1528885634.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:14.805Z,1528885634.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:15.203Z,1528885635.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:15.604Z,1528885635.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:15.993Z,1528885635.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:16.398Z,1528885636.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:16.796Z,1528885636.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:17.204Z,1528885637.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:17.595Z,1528885637.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:18.005Z,1528885638.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:18.403Z,1528885638.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:18.812Z,1528885638.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:19.195Z,1528885639.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:19.591Z,1528885639.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:19.995Z,1528885639.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:20.395Z,1528885640.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:20.804Z,1528885640.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:21.208Z,1528885641.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:21.608Z,1528885641.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:21.992Z,1528885641.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:22.395Z,1528885642.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:22.794Z,1528885642.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:23.196Z,1528885643.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:23.596Z,1528885643.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:24.004Z,1528885644.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:24.404Z,1528885644.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:24.803Z,1528885644.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:25.195Z,1528885645.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:25.592Z,1528885645.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:25.995Z,1528885645.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:26.400Z,1528885646.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:26.801Z,1528885646.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:27.204Z,1528885647.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:27.603Z,1528885647.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:27.995Z,1528885647.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:28.400Z,1528885648.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:28.794Z,1528885648.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:29.194Z,1528885649.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:29.595Z,1528885649.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:30.005Z,1528885650.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:30.403Z,1528885650.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:30.803Z,1528885650.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:31.195Z,1528885651.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:31.594Z,1528885651.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:31.995Z,1528885651.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:32.394Z,1528885652.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:32.808Z,1528885652.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:33.208Z,1528885653.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:33.608Z,1528885653.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:33.000Z,1528885654.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:34.395Z,1528885654.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:34.795Z,1528885654.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:35.195Z,1528885655.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:35.595Z,1528885655.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:36.004Z,1528885656.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:36.405Z,1528885656.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:36.804Z,1528885656.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:37.196Z,1528885657.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:37.594Z,1528885657.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:37.994Z,1528885657.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:38.395Z,1528885658.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:38.808Z,1528885658.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:39.208Z,1528885659.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:39.603Z,1528885659.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:39.994Z,1528885659.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:40.400Z,1528885660.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:40.799Z,1528885660.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:41.195Z,1528885661.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:41.596Z,1528885661.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:42.008Z,1528885662.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:42.408Z,1528885662.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:42.808Z,1528885662.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:43.195Z,1528885663.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:43.604Z,1528885663.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:43.996Z,1528885663.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:44.397Z,1528885664.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:44.808Z,1528885664.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:45.207Z,1528885665.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:45.607Z,1528885665.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:45.998Z,1528885665.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:46.402Z,1528885666.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:49.503Z,1528885669.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:49.664Z,1528885669.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:50.049Z,1528885670.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:50.456Z,1528885670.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:50.853Z,1528885670.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:51.244Z,1528885671.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:51.648Z,1528885671.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:52.048Z,1528885672.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:52.444Z,1528885672.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:52.854Z,1528885672.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:53.260Z,1528885673.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:53.647Z,1528885673.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:54.048Z,1528885674.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:54.442Z,1528885674.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:54.848Z,1528885674.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:55.247Z,1528885675.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:55.648Z,1528885675.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:56.050Z,1528885676.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:56.455Z,1528885676.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:56.850Z,1528885676.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:57.244Z,1528885677.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:57.644Z,1528885677.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:58.042Z,1528885678.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:58.446Z,1528885678.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:58.864Z,1528885678.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:59.250Z,1528885679.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:27:59.649Z,1528885679.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:00.042Z,1528885680.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:00.437Z,1528885680.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:00.848Z,1528885680.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:01.252Z,1528885681.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:01.644Z,1528885681.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:02.046Z,1528885682.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:02.460Z,1528885682.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:02.852Z,1528885682.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:03.246Z,1528885683.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:03.649Z,1528885683.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:04.046Z,1528885684.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:04.448Z,1528885684.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:04.862Z,1528885684.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:05.262Z,1528885685.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:05.651Z,1528885685.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:06.050Z,1528885686.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:06.432Z,1528885686.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:06.836Z,1528885686.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:07.237Z,1528885687.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:07.631Z,1528885687.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:08.048Z,1528885688.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:08.447Z,1528885688.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:08.843Z,1528885688.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:09.240Z,1528885689.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:09.639Z,1528885689.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:10.039Z,1528885690.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:10.439Z,1528885690.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:10.847Z,1528885690.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:11.247Z,1528885691.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:11.648Z,1528885691.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:12.039Z,1528885692.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:12.436Z,1528885692.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:12.862Z,1528885692.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:13.243Z,1528885693.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:13.636Z,1528885693.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:14.048Z,1528885694.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:14.447Z,1528885694.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:14.844Z,1528885694.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:15.238Z,1528885695.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:15.640Z,1528885695.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:16.036Z,1528885696.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:16.444Z,1528885696.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:16.847Z,1528885696.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:17.248Z,1528885697.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:17.648Z,1528885697.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:18.039Z,1528885698.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:18.436Z,1528885698.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:18.839Z,1528885698.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:19.240Z,1528885699.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:19.635Z,1528885699.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:20.043Z,1528885700.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:20.447Z,1528885700.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:20.848Z,1528885700.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:21.242Z,1528885701.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:21.640Z,1528885701.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:22.040Z,1528885702.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:22.444Z,1528885702.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:22.860Z,1528885702.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:23.252Z,1528885703.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:23.649Z,1528885703.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:24.049Z,1528885704.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:24.446Z,1528885704.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:24.845Z,1528885704.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:25.252Z,1528885705.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:25.646Z,1528885705.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:26.050Z,1528885706.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:26.460Z,1528885706.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:26.847Z,1528885706.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:27.289Z,1528885707.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:27.648Z,1528885707.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:28.046Z,1528885708.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:28.446Z,1528885708.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:28.856Z,1528885708.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:29.252Z,1528885709.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:29.649Z,1528885709.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:30.054Z,1528885710.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:30.450Z,1528885710.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:30.852Z,1528885710.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:31.230Z,1528885711.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:31.629Z,1528885711.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:32.059Z,1528885712.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:32.457Z,1528885712.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:32.858Z,1528885712.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:33.233Z,1528885713.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:33.651Z,1528885713.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:34.040Z,1528885714.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:34.436Z,1528885714.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:34.864Z,1528885714.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:35.248Z,1528885715.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:35.668Z,1528885715.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:36.041Z,1528885716.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:36.449Z,1528885716.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:36.841Z,1528885716.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:37.241Z,1528885717.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:37.639Z,1528885717.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:38.049Z,1528885718.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:38.449Z,1528885718.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:38.844Z,1528885718.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:39.240Z,1528885719.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:39.639Z,1528885719.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:40.037Z,1528885720.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:40.438Z,1528885720.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:40.849Z,1528885720.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:41.249Z,1528885721.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:41.652Z,1528885721.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:42.040Z,1528885722.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:42.436Z,1528885722.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:42.852Z,1528885722.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:43.251Z,1528885723.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:43.648Z,1528885723.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:44.040Z,1528885724.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:44.439Z,1528885724.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:44.852Z,1528885724.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:45.251Z,1528885725.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:45.649Z,1528885725.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:46.040Z,1528885726.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:46.442Z,1528885726.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:49.585Z,1528885729.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:49.749Z,1528885729.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:50.132Z,1528885730.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:50.531Z,1528885730.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:50.908Z,1528885730.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:51.325Z,1528885731.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:51.739Z,1528885731.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:52.138Z,1528885732.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:52.535Z,1528885732.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:52.937Z,1528885732.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:53.312Z,1528885733.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:53.736Z,1528885733.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:54.117Z,1528885734.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:54.512Z,1528885734.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:54.943Z,1528885734.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:55.327Z,1528885735.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:55.720Z,1528885735.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:56.117Z,1528885736.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:56.519Z,1528885736.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:56.917Z,1528885736.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:57.317Z,1528885737.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:57.718Z,1528885737.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:58.124Z,1528885738.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:58.527Z,1528885738.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:58.927Z,1528885738.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:59.316Z,1528885739.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:28:59.717Z,1528885739.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:00.121Z,1528885740.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:00.516Z,1528885740.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:00.923Z,1528885740.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:01.323Z,1528885741.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:01.724Z,1528885741.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:02.117Z,1528885742.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:02.519Z,1528885742.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:02.915Z,1528885742.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:03.316Z,1528885743.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:03.727Z,1528885743.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:04.124Z,1528885744.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:04.527Z,1528885744.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:04.927Z,1528885744.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:05.316Z,1528885745.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:05.717Z,1528885745.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:06.122Z,1528885746.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:06.515Z,1528885746.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:06.923Z,1528885746.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:07.328Z,1528885747.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:07.724Z,1528885747.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:08.119Z,1528885748.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:08.524Z,1528885748.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:08.916Z,1528885748.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:09.317Z,1528885749.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:09.718Z,1528885749.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:10.120Z,1528885750.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:10.526Z,1528885750.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:10.927Z,1528885750.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:11.314Z,1528885751.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:11.720Z,1528885751.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:12.122Z,1528885752.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:12.515Z,1528885752.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:12.927Z,1528885752.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:13.327Z,1528885753.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:13.723Z,1528885753.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:14.117Z,1528885754.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:14.521Z,1528885754.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:14.926Z,1528885754.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:15.320Z,1528885755.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:15.719Z,1528885755.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:16.123Z,1528885756.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:16.527Z,1528885756.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:16.950Z,1528885756.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:17.318Z,1528885757.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:17.721Z,1528885757.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:18.121Z,1528885758.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:18.515Z,1528885758.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:18.923Z,1528885758.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:19.323Z,1528885759.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:19.728Z,1528885759.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:20.128Z,1528885760.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:20.522Z,1528885760.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:20.918Z,1528885760.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:21.320Z,1528885761.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:21.721Z,1528885761.721 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:21.721Z,1528885761.721 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 141
2018-06-13T10:29:21.721Z,1528885761.721 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:29:21.723Z,1528885761.723 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:21.723Z,1528885761.723 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 141
2018-06-13T10:29:21.723Z,1528885761.723 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:29:21.725Z,1528885761.725 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:21.725Z,1528885761.725 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 141
2018-06-13T10:29:21.725Z,1528885761.725 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:29:21.817Z,1528885761.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:29:21.817Z,1528885761.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:29:21.818Z,1528885761.818 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:29:22.205Z,1528885762.205 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:29:22.205Z,1528885762.205 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 141
2018-06-13T10:29:22.206Z,1528885762.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:29:22.206Z,1528885762.206 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 141
2018-06-13T10:29:22.206Z,1528885762.206 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:29:22.207Z,1528885762.207 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 141
2018-06-13T10:29:22.527Z,1528885762.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:29:22.528Z,1528885762.528 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:29:22.528Z,1528885762.528 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:29:22.528Z,1528885762.528 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:29:22.529Z,1528885762.529 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:29:22.529Z,1528885762.529 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:29:22.530Z,1528885762.530 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:29:22.530Z,1528885762.530 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:29:22.530Z,1528885762.530 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:29:22.937Z,1528885762.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:29:22.938Z,1528885762.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:23.316Z,1528885763.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:29:23.317Z,1528885763.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:23.719Z,1528885763.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:29:23.720Z,1528885763.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:24.118Z,1528885764.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:29:24.118Z,1528885764.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:24.521Z,1528885764.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:29:24.522Z,1528885764.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:24.928Z,1528885764.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:29:24.930Z,1528885764.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:25.333Z,1528885765.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:29:25.333Z,1528885765.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:25.724Z,1528885765.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:29:25.725Z,1528885765.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:26.119Z,1528885766.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:29:26.120Z,1528885766.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:26.517Z,1528885766.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:29:26.518Z,1528885766.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:26.916Z,1528885766.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:29:26.917Z,1528885766.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:27.320Z,1528885767.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:29:27.322Z,1528885767.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:27.717Z,1528885767.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:29:27.717Z,1528885767.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:28.124Z,1528885768.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:29:28.125Z,1528885768.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:28.532Z,1528885768.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:29:28.534Z,1528885768.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:28.932Z,1528885768.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:29:28.933Z,1528885768.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:29.317Z,1528885769.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:29:29.318Z,1528885769.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:29.719Z,1528885769.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:29:29.720Z,1528885769.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:30.117Z,1528885770.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:29:30.118Z,1528885770.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:30.516Z,1528885770.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:29:30.516Z,1528885770.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:30.929Z,1528885770.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:29:30.930Z,1528885770.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:31.335Z,1528885771.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:29:31.336Z,1528885771.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:31.728Z,1528885771.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:29:31.729Z,1528885771.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:32.128Z,1528885772.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:29:32.129Z,1528885772.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:32.521Z,1528885772.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:29:32.522Z,1528885772.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:32.929Z,1528885772.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:29:32.930Z,1528885772.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:33.340Z,1528885773.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:29:33.341Z,1528885773.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:33.732Z,1528885773.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:29:33.733Z,1528885773.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:34.124Z,1528885774.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:29:34.125Z,1528885774.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:34.519Z,1528885774.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:29:34.520Z,1528885774.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:34.928Z,1528885774.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T10:29:34.929Z,1528885774.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:35.330Z,1528885775.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:29:35.330Z,1528885775.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:35.728Z,1528885775.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:29:35.729Z,1528885775.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:36.134Z,1528885776.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:29:36.134Z,1528885776.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:36.520Z,1528885776.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:29:36.521Z,1528885776.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:36.928Z,1528885776.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T10:29:36.929Z,1528885776.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:37.329Z,1528885777.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:29:37.330Z,1528885777.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:37.726Z,1528885777.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:29:37.727Z,1528885777.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:38.121Z,1528885778.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T10:29:38.122Z,1528885778.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:38.523Z,1528885778.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:29:38.524Z,1528885778.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:38.929Z,1528885778.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:29:38.930Z,1528885778.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:39.332Z,1528885779.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:29:39.333Z,1528885779.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:39.733Z,1528885779.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:29:39.734Z,1528885779.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:40.120Z,1528885780.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T10:29:40.122Z,1528885780.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:40.519Z,1528885780.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:29:40.520Z,1528885780.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:40.929Z,1528885780.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T10:29:40.930Z,1528885780.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:41.328Z,1528885781.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:29:41.329Z,1528885781.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:41.736Z,1528885781.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:42.122Z,1528885782.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:42.520Z,1528885782.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:42.930Z,1528885782.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:43.333Z,1528885783.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:43.729Z,1528885783.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:44.121Z,1528885784.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:44.521Z,1528885784.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:44.934Z,1528885784.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:45.340Z,1528885785.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:45.740Z,1528885785.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:46.121Z,1528885786.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:46.528Z,1528885786.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:49.640Z,1528885789.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:49.643Z,1528885789.643 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T10:24:48.1Z
2018-06-13T10:29:49.643Z,1528885789.643 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T10:29:49.643Z,1528885789.643 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T10:29:49.825Z,1528885789.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:50.968Z,1528885790.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:51.127Z,1528885791.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:51.517Z,1528885791.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:51.919Z,1528885791.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:52.317Z,1528885792.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:52.721Z,1528885792.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:53.130Z,1528885793.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:56.232Z,1528885796.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:56.363Z,1528885796.363 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0164.lzma
2018-06-13T10:29:56.424Z,1528885796.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:56.788Z,1528885796.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:57.123Z,1528885797.123 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0164.lzma.bak
2018-06-13T10:29:57.123Z,1528885797.123 [DataOverHttps](INFO): SBD MOMSN=8329059
2018-06-13T10:29:57.198Z,1528885797.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:59.041Z,1528885799.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:29:59.060Z,1528885799.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:29:59.182Z,1528885799.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:29:59.205Z,1528885799.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:02.331Z,1528885802.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:02.353Z,1528885802.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:02.470Z,1528885802.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:02.513Z,1528885802.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:02.863Z,1528885802.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:02.895Z,1528885802.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:03.264Z,1528885803.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:03.294Z,1528885803.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:03.663Z,1528885803.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:03.695Z,1528885803.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:04.079Z,1528885804.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:04.098Z,1528885804.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:07.193Z,1528885807.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:07.211Z,1528885807.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:07.331Z,1528885807.331 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0165.lzma
2018-06-13T10:30:07.366Z,1528885807.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:07.416Z,1528885807.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:07.751Z,1528885807.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:07.768Z,1528885807.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:08.137Z,1528885808.137 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0165.lzma.bak
2018-06-13T10:30:08.137Z,1528885808.137 [DataOverHttps](INFO): SBD MOMSN=8329061
2018-06-13T10:30:08.219Z,1528885808.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:08.259Z,1528885808.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:10.023Z,1528885810.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:10.060Z,1528885810.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:10.063Z,1528885810.063 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T10:30:10.063Z,1528885810.063 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T10:30:10.063Z,1528885810.063 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T10:30:10.182Z,1528885810.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:10.246Z,1528885810.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:10.596Z,1528885810.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:10.616Z,1528885810.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:13.698Z,1528885813.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:13.720Z,1528885813.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:13.847Z,1528885813.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:13.901Z,1528885813.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:14.244Z,1528885814.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:14.264Z,1528885814.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:14.631Z,1528885814.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:14.666Z,1528885814.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:15.048Z,1528885815.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:15.067Z,1528885815.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:15.451Z,1528885815.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:15.471Z,1528885815.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:15.837Z,1528885815.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:15.875Z,1528885815.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:16.228Z,1528885816.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:16.262Z,1528885816.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:16.631Z,1528885816.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:16.669Z,1528885816.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:17.027Z,1528885817.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:17.068Z,1528885817.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:17.432Z,1528885817.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:17.449Z,1528885817.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:17.831Z,1528885817.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:17.849Z,1528885817.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:18.246Z,1528885818.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:18.280Z,1528885818.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:18.645Z,1528885818.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:18.663Z,1528885818.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:19.046Z,1528885819.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:19.063Z,1528885819.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:19.436Z,1528885819.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:19.454Z,1528885819.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:19.836Z,1528885819.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:19.854Z,1528885819.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:20.238Z,1528885820.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:20.280Z,1528885820.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:20.637Z,1528885820.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:20.655Z,1528885820.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:21.043Z,1528885821.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:21.061Z,1528885821.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:21.480Z,1528885821.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:21.498Z,1528885821.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:21.840Z,1528885821.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:21.876Z,1528885821.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:22.235Z,1528885822.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:22.259Z,1528885822.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:22.638Z,1528885822.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:22.660Z,1528885822.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:23.027Z,1528885823.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:23.064Z,1528885823.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:23.438Z,1528885823.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:23.456Z,1528885823.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:23.839Z,1528885823.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:23.857Z,1528885823.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:24.248Z,1528885824.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:24.266Z,1528885824.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:24.651Z,1528885824.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:24.668Z,1528885824.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:25.048Z,1528885825.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:25.067Z,1528885825.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:25.427Z,1528885825.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:25.463Z,1528885825.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:25.842Z,1528885825.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:25.864Z,1528885825.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:26.231Z,1528885826.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:26.269Z,1528885826.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:26.627Z,1528885826.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:26.757Z,1528885826.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:27.038Z,1528885827.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:27.175Z,1528885827.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:27.465Z,1528885827.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:27.667Z,1528885827.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:27.842Z,1528885827.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:27.910Z,1528885827.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:28.235Z,1528885828.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:28.309Z,1528885828.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:28.635Z,1528885828.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:28.674Z,1528885828.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:29.035Z,1528885829.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:29.071Z,1528885829.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:29.435Z,1528885829.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:29.475Z,1528885829.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:29.835Z,1528885829.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:29.870Z,1528885829.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:30.241Z,1528885830.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:30.280Z,1528885830.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:30.649Z,1528885830.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:30.681Z,1528885830.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:31.045Z,1528885831.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:31.074Z,1528885831.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:31.431Z,1528885831.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:31.472Z,1528885831.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:31.835Z,1528885831.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:31.852Z,1528885831.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:32.240Z,1528885832.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:32.258Z,1528885832.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:32.635Z,1528885832.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:32.653Z,1528885832.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:33.049Z,1528885833.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:33.083Z,1528885833.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:33.453Z,1528885833.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:33.491Z,1528885833.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:33.849Z,1528885833.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:33.867Z,1528885833.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:34.240Z,1528885834.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:34.258Z,1528885834.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:34.642Z,1528885834.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:34.660Z,1528885834.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:35.035Z,1528885835.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:35.068Z,1528885835.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:35.439Z,1528885835.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:35.471Z,1528885835.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:35.839Z,1528885835.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:35.869Z,1528885835.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:36.251Z,1528885836.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:36.269Z,1528885836.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:36.650Z,1528885836.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:36.676Z,1528885836.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:37.051Z,1528885837.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:37.069Z,1528885837.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:37.439Z,1528885837.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:37.462Z,1528885837.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:37.839Z,1528885837.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:37.862Z,1528885837.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:38.240Z,1528885838.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:38.271Z,1528885838.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:38.641Z,1528885838.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:38.664Z,1528885838.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:39.051Z,1528885839.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:39.069Z,1528885839.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:39.456Z,1528885839.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:39.474Z,1528885839.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:39.848Z,1528885839.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:39.866Z,1528885839.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:40.239Z,1528885840.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:40.263Z,1528885840.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:40.639Z,1528885840.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:40.664Z,1528885840.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:41.041Z,1528885841.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:41.059Z,1528885841.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:41.439Z,1528885841.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:41.470Z,1528885841.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:41.835Z,1528885841.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:41.876Z,1528885841.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:42.252Z,1528885842.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:42.270Z,1528885842.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:42.656Z,1528885842.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:42.674Z,1528885842.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:43.056Z,1528885843.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:43.075Z,1528885843.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:43.435Z,1528885843.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:43.463Z,1528885843.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:43.835Z,1528885843.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:43.862Z,1528885843.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:44.237Z,1528885844.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:44.267Z,1528885844.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:44.631Z,1528885844.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:44.667Z,1528885844.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:45.052Z,1528885845.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:45.070Z,1528885845.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:45.456Z,1528885845.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:45.475Z,1528885845.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:45.852Z,1528885845.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:45.870Z,1528885845.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:46.235Z,1528885846.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:46.272Z,1528885846.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:46.635Z,1528885846.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:46.670Z,1528885846.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:47.035Z,1528885847.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:47.073Z,1528885847.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:47.436Z,1528885847.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:47.461Z,1528885847.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:47.835Z,1528885847.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:47.853Z,1528885847.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:48.245Z,1528885848.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:48.284Z,1528885848.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:48.653Z,1528885848.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:48.697Z,1528885848.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:49.057Z,1528885849.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:49.085Z,1528885849.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:49.439Z,1528885849.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:49.456Z,1528885849.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:49.840Z,1528885849.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:49.858Z,1528885849.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:50.244Z,1528885850.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:50.262Z,1528885850.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:50.634Z,1528885850.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:50.668Z,1528885850.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:51.050Z,1528885851.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:51.068Z,1528885851.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:51.448Z,1528885851.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:51.466Z,1528885851.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:51.847Z,1528885851.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:51.873Z,1528885851.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:52.239Z,1528885852.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:52.265Z,1528885852.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:52.639Z,1528885852.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:52.657Z,1528885852.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:53.035Z,1528885853.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:53.061Z,1528885853.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:53.442Z,1528885853.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:53.461Z,1528885853.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:53.843Z,1528885853.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:53.862Z,1528885853.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:54.250Z,1528885854.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:54.272Z,1528885854.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:54.651Z,1528885854.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:54.670Z,1528885854.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:55.051Z,1528885855.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:55.071Z,1528885855.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:55.435Z,1528885855.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:55.459Z,1528885855.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:55.839Z,1528885855.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:55.864Z,1528885855.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:56.243Z,1528885856.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:56.260Z,1528885856.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:56.635Z,1528885856.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:56.658Z,1528885856.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:57.050Z,1528885857.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:57.072Z,1528885857.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:57.451Z,1528885857.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:57.468Z,1528885857.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:57.848Z,1528885857.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:57.866Z,1528885857.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:58.244Z,1528885858.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:58.268Z,1528885858.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:58.642Z,1528885858.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:58.660Z,1528885858.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:59.035Z,1528885859.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:59.058Z,1528885859.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:59.439Z,1528885859.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:59.463Z,1528885859.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:30:59.842Z,1528885859.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:30:59.860Z,1528885859.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:00.251Z,1528885860.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:00.269Z,1528885860.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:00.653Z,1528885860.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:00.676Z,1528885860.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:01.051Z,1528885861.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:01.072Z,1528885861.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:01.435Z,1528885861.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:01.458Z,1528885861.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:01.839Z,1528885861.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:01.862Z,1528885861.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:02.242Z,1528885862.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:02.260Z,1528885862.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:02.635Z,1528885862.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:02.664Z,1528885862.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:03.052Z,1528885863.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:03.069Z,1528885863.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:03.451Z,1528885863.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:03.480Z,1528885863.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:03.847Z,1528885863.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:03.865Z,1528885863.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:04.236Z,1528885864.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:04.271Z,1528885864.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:04.635Z,1528885864.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:04.664Z,1528885864.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:05.048Z,1528885865.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:05.066Z,1528885865.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:05.459Z,1528885865.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:05.480Z,1528885865.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:05.851Z,1528885865.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:05.876Z,1528885865.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:06.237Z,1528885866.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:06.264Z,1528885866.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:06.635Z,1528885866.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:06.671Z,1528885866.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:07.052Z,1528885867.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:07.070Z,1528885867.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:07.450Z,1528885867.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:07.474Z,1528885867.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:07.851Z,1528885867.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:07.869Z,1528885867.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:08.231Z,1528885868.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:08.268Z,1528885868.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:08.635Z,1528885868.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:08.667Z,1528885868.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:09.051Z,1528885869.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:09.069Z,1528885869.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:09.453Z,1528885869.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:09.471Z,1528885869.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:09.852Z,1528885869.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:09.870Z,1528885869.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:10.239Z,1528885870.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:10.272Z,1528885870.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:10.635Z,1528885870.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:10.668Z,1528885870.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:11.059Z,1528885871.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:11.078Z,1528885871.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:11.455Z,1528885871.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:11.472Z,1528885871.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:11.855Z,1528885871.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:11.873Z,1528885871.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:12.240Z,1528885872.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:12.268Z,1528885872.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:12.635Z,1528885872.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:12.671Z,1528885872.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:13.056Z,1528885873.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:13.074Z,1528885873.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:13.459Z,1528885873.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:13.477Z,1528885873.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:16.569Z,1528885876.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:16.592Z,1528885876.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:16.725Z,1528885876.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:16.768Z,1528885876.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:17.127Z,1528885877.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:17.166Z,1528885877.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:17.531Z,1528885877.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:17.566Z,1528885877.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:17.924Z,1528885877.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:17.948Z,1528885877.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:18.337Z,1528885878.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:18.355Z,1528885878.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:18.737Z,1528885878.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:18.754Z,1528885878.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:19.134Z,1528885879.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:19.151Z,1528885879.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:19.527Z,1528885879.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:19.546Z,1528885879.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:19.922Z,1528885879.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:19.956Z,1528885879.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:20.330Z,1528885880.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:20.348Z,1528885880.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:20.728Z,1528885880.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:20.746Z,1528885880.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:21.137Z,1528885881.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:21.155Z,1528885881.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:21.534Z,1528885881.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:21.551Z,1528885881.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:21.934Z,1528885881.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:21.956Z,1528885881.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:22.331Z,1528885882.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:22.348Z,1528885882.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:22.725Z,1528885882.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:22.743Z,1528885882.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:23.122Z,1528885883.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:23.157Z,1528885883.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:23.531Z,1528885883.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:23.549Z,1528885883.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:23.923Z,1528885883.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:23.959Z,1528885883.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:24.334Z,1528885884.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:24.353Z,1528885884.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:24.737Z,1528885884.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:24.760Z,1528885884.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:25.138Z,1528885885.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:25.156Z,1528885885.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:25.528Z,1528885885.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:25.546Z,1528885885.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:25.929Z,1528885885.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:25.947Z,1528885885.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:26.323Z,1528885886.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:26.346Z,1528885886.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:26.728Z,1528885886.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:26.746Z,1528885886.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:27.138Z,1528885887.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:27.160Z,1528885887.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:27.537Z,1528885887.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:27.555Z,1528885887.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:27.933Z,1528885887.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:27.951Z,1528885887.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:28.330Z,1528885888.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:28.348Z,1528885888.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:28.727Z,1528885888.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:28.749Z,1528885888.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:29.127Z,1528885889.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:29.150Z,1528885889.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:29.535Z,1528885889.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:29.553Z,1528885889.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:29.929Z,1528885889.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:29.952Z,1528885889.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:30.334Z,1528885890.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:30.356Z,1528885890.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:30.737Z,1528885890.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:30.755Z,1528885890.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:31.134Z,1528885891.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:31.151Z,1528885891.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:31.527Z,1528885891.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:31.552Z,1528885891.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:31.931Z,1528885891.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:31.949Z,1528885891.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:32.328Z,1528885892.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:32.346Z,1528885892.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:32.729Z,1528885892.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:32.746Z,1528885892.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:33.138Z,1528885893.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:33.157Z,1528885893.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:33.538Z,1528885893.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:33.556Z,1528885893.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:33.939Z,1528885893.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:33.956Z,1528885893.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:34.330Z,1528885894.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:34.348Z,1528885894.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:34.729Z,1528885894.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:34.751Z,1528885894.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:35.127Z,1528885895.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:35.150Z,1528885895.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:35.527Z,1528885895.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:35.553Z,1528885895.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:35.923Z,1528885895.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:35.948Z,1528885895.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:36.339Z,1528885896.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:36.357Z,1528885896.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:36.741Z,1528885896.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:36.759Z,1528885896.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:37.144Z,1528885897.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:37.162Z,1528885897.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:37.530Z,1528885897.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:37.548Z,1528885897.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:37.931Z,1528885897.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:37.956Z,1528885897.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:38.329Z,1528885898.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:38.347Z,1528885898.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:38.731Z,1528885898.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:38.753Z,1528885898.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:39.144Z,1528885899.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:39.162Z,1528885899.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:39.541Z,1528885899.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:39.564Z,1528885899.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:39.941Z,1528885899.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:39.959Z,1528885899.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:40.330Z,1528885900.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:40.354Z,1528885900.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:40.719Z,1528885900.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:40.749Z,1528885900.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:41.129Z,1528885901.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:41.148Z,1528885901.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:41.528Z,1528885901.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:41.566Z,1528885901.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:41.919Z,1528885901.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:41.956Z,1528885901.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:42.338Z,1528885902.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:42.364Z,1528885902.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:42.741Z,1528885902.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:42.765Z,1528885902.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:43.139Z,1528885903.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:43.157Z,1528885903.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:43.528Z,1528885903.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:43.547Z,1528885903.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:43.930Z,1528885903.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:43.952Z,1528885903.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:44.320Z,1528885904.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:44.355Z,1528885904.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:44.728Z,1528885904.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:44.747Z,1528885904.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:45.143Z,1528885905.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:45.161Z,1528885905.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:45.539Z,1528885905.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:45.558Z,1528885905.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:45.939Z,1528885905.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:45.957Z,1528885905.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:46.331Z,1528885906.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:46.349Z,1528885906.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:46.729Z,1528885906.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:46.746Z,1528885906.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:47.127Z,1528885907.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:47.161Z,1528885907.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:47.524Z,1528885907.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:47.557Z,1528885907.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:47.919Z,1528885907.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:47.946Z,1528885907.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:48.341Z,1528885908.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:48.359Z,1528885908.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:48.743Z,1528885908.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:48.768Z,1528885908.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:49.139Z,1528885909.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:49.157Z,1528885909.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:49.523Z,1528885909.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:49.559Z,1528885909.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:49.923Z,1528885909.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:49.962Z,1528885909.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:50.324Z,1528885910.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:50.356Z,1528885910.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:50.723Z,1528885910.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:50.755Z,1528885910.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:51.143Z,1528885911.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:51.167Z,1528885911.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:51.543Z,1528885911.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:51.561Z,1528885911.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:51.939Z,1528885911.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:51.957Z,1528885911.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:52.323Z,1528885912.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:52.362Z,1528885912.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:52.719Z,1528885912.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:52.759Z,1528885912.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:53.123Z,1528885913.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:53.159Z,1528885913.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:53.524Z,1528885913.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:53.556Z,1528885913.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:53.923Z,1528885913.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:53.955Z,1528885913.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:54.340Z,1528885914.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:54.358Z,1528885914.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:54.743Z,1528885914.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:54.761Z,1528885914.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:55.130Z,1528885915.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:55.166Z,1528885915.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:55.523Z,1528885915.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:55.556Z,1528885915.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:55.923Z,1528885915.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:55.962Z,1528885915.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:56.324Z,1528885916.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:56.355Z,1528885916.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:56.723Z,1528885916.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:56.755Z,1528885916.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:57.143Z,1528885917.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:57.170Z,1528885917.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:57.543Z,1528885917.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:57.561Z,1528885917.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:57.942Z,1528885917.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:57.964Z,1528885917.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:58.323Z,1528885918.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:58.354Z,1528885918.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:58.727Z,1528885918.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:58.765Z,1528885918.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:59.123Z,1528885919.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:59.140Z,1528885919.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:59.522Z,1528885919.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:59.540Z,1528885919.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:31:59.922Z,1528885919.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:31:59.940Z,1528885919.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:00.333Z,1528885920.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:00.364Z,1528885920.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:00.737Z,1528885920.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:00.765Z,1528885920.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:01.137Z,1528885921.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:01.163Z,1528885921.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:01.525Z,1528885921.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:01.543Z,1528885921.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:01.924Z,1528885921.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:01.958Z,1528885921.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:02.324Z,1528885922.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:02.342Z,1528885922.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:02.726Z,1528885922.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:02.744Z,1528885922.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:03.138Z,1528885923.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:03.156Z,1528885923.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:03.537Z,1528885923.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:03.555Z,1528885923.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:03.934Z,1528885923.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:03.951Z,1528885923.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:04.328Z,1528885924.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:04.358Z,1528885924.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:04.730Z,1528885924.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:04.748Z,1528885924.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:05.134Z,1528885925.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:05.156Z,1528885925.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:05.537Z,1528885925.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:05.555Z,1528885925.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:05.934Z,1528885925.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:05.951Z,1528885925.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:06.327Z,1528885926.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:06.358Z,1528885926.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:06.730Z,1528885926.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:06.748Z,1528885926.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:07.134Z,1528885927.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:07.152Z,1528885927.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:07.537Z,1528885927.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:07.555Z,1528885927.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:07.937Z,1528885927.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:07.955Z,1528885927.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:08.329Z,1528885928.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:08.347Z,1528885928.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:08.727Z,1528885928.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:08.750Z,1528885928.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:09.137Z,1528885929.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:09.155Z,1528885929.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:09.537Z,1528885929.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:09.555Z,1528885929.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:09.934Z,1528885929.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:09.956Z,1528885929.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:10.330Z,1528885930.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:10.356Z,1528885930.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:10.729Z,1528885930.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:10.747Z,1528885930.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:13.884Z,1528885933.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:13.903Z,1528885933.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:14.041Z,1528885934.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:14.083Z,1528885934.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:14.437Z,1528885934.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:14.455Z,1528885934.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:14.835Z,1528885934.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:14.852Z,1528885934.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:15.229Z,1528885935.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:15.247Z,1528885935.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:15.627Z,1528885935.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:15.658Z,1528885935.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:16.025Z,1528885936.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:16.043Z,1528885936.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:16.454Z,1528885936.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:16.484Z,1528885936.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:16.838Z,1528885936.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:16.856Z,1528885936.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:17.237Z,1528885937.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:17.255Z,1528885937.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:17.629Z,1528885937.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:17.647Z,1528885937.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:18.027Z,1528885938.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:18.049Z,1528885938.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:18.422Z,1528885938.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:18.448Z,1528885938.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:18.829Z,1528885938.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:18.847Z,1528885938.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:19.234Z,1528885939.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:19.256Z,1528885939.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:19.641Z,1528885939.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:19.687Z,1528885939.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:20.034Z,1528885940.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:20.056Z,1528885940.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:20.427Z,1528885940.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:20.449Z,1528885940.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:20.830Z,1528885940.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:20.847Z,1528885940.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:21.229Z,1528885941.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:21.247Z,1528885941.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:21.628Z,1528885941.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:21.658Z,1528885941.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:22.030Z,1528885942.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:22.047Z,1528885942.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:22.439Z,1528885942.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:22.456Z,1528885942.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:22.838Z,1528885942.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:22.860Z,1528885942.860 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:22.860Z,1528885942.860 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 142
2018-06-13T10:32:22.860Z,1528885942.860 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:32:22.862Z,1528885942.862 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:22.862Z,1528885942.862 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 142
2018-06-13T10:32:22.862Z,1528885942.862 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:32:22.864Z,1528885942.864 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:22.864Z,1528885942.864 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 142
2018-06-13T10:32:22.864Z,1528885942.864 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:32:22.961Z,1528885942.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:32:22.961Z,1528885942.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:32:22.962Z,1528885942.962 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:32:23.244Z,1528885943.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:23.337Z,1528885943.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:32:23.337Z,1528885943.337 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 142
2018-06-13T10:32:23.337Z,1528885943.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:32:23.338Z,1528885943.338 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 142
2018-06-13T10:32:23.338Z,1528885943.338 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:32:23.338Z,1528885943.338 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 142
2018-06-13T10:32:23.623Z,1528885943.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:23.655Z,1528885943.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:32:23.655Z,1528885943.655 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:32:23.655Z,1528885943.655 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:32:23.656Z,1528885943.656 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:32:23.656Z,1528885943.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:32:23.657Z,1528885943.657 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:32:23.657Z,1528885943.657 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:32:23.658Z,1528885943.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:32:23.658Z,1528885943.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:32:24.019Z,1528885944.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:24.055Z,1528885944.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:32:24.056Z,1528885944.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:24.424Z,1528885944.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:24.455Z,1528885944.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:32:24.456Z,1528885944.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:24.820Z,1528885944.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:24.847Z,1528885944.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:32:24.848Z,1528885944.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:25.243Z,1528885945.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:25.261Z,1528885945.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:32:25.262Z,1528885945.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:25.645Z,1528885945.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:25.667Z,1528885945.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:32:25.668Z,1528885945.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:26.040Z,1528885946.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:26.058Z,1528885946.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:32:26.059Z,1528885946.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:26.420Z,1528885946.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:26.456Z,1528885946.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:32:26.457Z,1528885946.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:26.836Z,1528885946.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:26.854Z,1528885946.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:32:26.854Z,1528885946.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:27.219Z,1528885947.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:27.256Z,1528885947.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:32:27.261Z,1528885947.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:27.624Z,1528885947.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:27.654Z,1528885947.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:32:27.655Z,1528885947.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:28.024Z,1528885948.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:28.057Z,1528885948.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:32:28.058Z,1528885948.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:28.441Z,1528885948.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:28.459Z,1528885948.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:32:28.460Z,1528885948.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:28.842Z,1528885948.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:28.874Z,1528885948.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:32:28.875Z,1528885948.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:29.245Z,1528885949.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:29.263Z,1528885949.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:32:29.263Z,1528885949.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:29.619Z,1528885949.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:29.655Z,1528885949.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:32:29.656Z,1528885949.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:30.023Z,1528885950.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:30.056Z,1528885950.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:32:30.057Z,1528885950.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:30.424Z,1528885950.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:30.463Z,1528885950.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:32:30.464Z,1528885950.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:30.819Z,1528885950.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:30.848Z,1528885950.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:32:30.853Z,1528885950.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:31.244Z,1528885951.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:31.262Z,1528885951.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:32:31.263Z,1528885951.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:31.641Z,1528885951.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:31.666Z,1528885951.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:32:31.667Z,1528885951.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:32.029Z,1528885952.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:32.065Z,1528885952.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:32:32.066Z,1528885952.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:32.423Z,1528885952.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:32.460Z,1528885952.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:32:32.466Z,1528885952.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:32.819Z,1528885952.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:32.837Z,1528885952.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:32:32.838Z,1528885952.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:33.229Z,1528885953.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:33.262Z,1528885953.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:32:33.263Z,1528885953.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:33.623Z,1528885953.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:33.641Z,1528885953.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:32:33.642Z,1528885953.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:34.026Z,1528885954.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:34.044Z,1528885954.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:32:34.045Z,1528885954.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:34.437Z,1528885954.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:34.471Z,1528885954.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:32:34.472Z,1528885954.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:34.837Z,1528885954.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:34.855Z,1528885954.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:32:34.855Z,1528885954.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:35.238Z,1528885955.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:35.256Z,1528885955.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:32:35.257Z,1528885955.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:35.625Z,1528885955.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:35.643Z,1528885955.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:32:35.643Z,1528885955.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:36.027Z,1528885956.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:36.061Z,1528885956.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T10:32:36.062Z,1528885956.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:36.422Z,1528885956.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:36.460Z,1528885956.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:32:36.465Z,1528885956.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:36.819Z,1528885956.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:36.858Z,1528885956.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:32:36.859Z,1528885956.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:37.239Z,1528885957.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:37.257Z,1528885957.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:32:37.258Z,1528885957.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:37.642Z,1528885957.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:37.668Z,1528885957.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:32:37.669Z,1528885957.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:38.034Z,1528885958.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:38.056Z,1528885958.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T10:32:38.058Z,1528885958.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:38.423Z,1528885958.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:38.456Z,1528885958.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:32:38.457Z,1528885958.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:38.823Z,1528885958.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:38.861Z,1528885958.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:32:38.862Z,1528885958.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:39.224Z,1528885959.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:39.254Z,1528885959.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T10:32:39.255Z,1528885959.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:39.623Z,1528885959.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:39.655Z,1528885959.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:32:39.655Z,1528885959.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:40.023Z,1528885960.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:40.056Z,1528885960.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:32:40.057Z,1528885960.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:40.440Z,1528885960.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:40.457Z,1528885960.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:32:40.458Z,1528885960.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:40.840Z,1528885960.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:40.858Z,1528885960.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:32:40.859Z,1528885960.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:41.244Z,1528885961.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:41.262Z,1528885961.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T10:32:41.263Z,1528885961.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:41.623Z,1528885961.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:41.655Z,1528885961.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:32:41.656Z,1528885961.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:42.023Z,1528885962.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:42.056Z,1528885962.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T10:32:42.058Z,1528885962.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:42.424Z,1528885962.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:42.456Z,1528885962.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:32:42.457Z,1528885962.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:42.824Z,1528885962.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:42.855Z,1528885962.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T10:32:42.856Z,1528885962.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:43.243Z,1528885963.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:43.261Z,1528885963.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:43.643Z,1528885963.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:43.661Z,1528885963.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:44.029Z,1528885964.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:44.066Z,1528885964.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:44.423Z,1528885964.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:44.456Z,1528885964.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:44.824Z,1528885964.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:44.862Z,1528885964.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:45.223Z,1528885965.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:45.264Z,1528885965.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:45.624Z,1528885965.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:45.659Z,1528885965.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:46.023Z,1528885966.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:46.061Z,1528885966.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:46.430Z,1528885966.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:46.463Z,1528885966.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:46.843Z,1528885966.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:46.862Z,1528885966.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:47.244Z,1528885967.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:47.263Z,1528885967.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:47.624Z,1528885967.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:47.660Z,1528885967.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:48.023Z,1528885968.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:48.059Z,1528885968.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:48.424Z,1528885968.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:48.462Z,1528885968.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:48.819Z,1528885968.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:48.849Z,1528885968.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:49.233Z,1528885969.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:49.260Z,1528885969.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:49.638Z,1528885969.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:49.676Z,1528885969.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:50.033Z,1528885970.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:50.067Z,1528885970.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:50.423Z,1528885970.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:50.464Z,1528885970.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:50.827Z,1528885970.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:50.845Z,1528885970.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:51.222Z,1528885971.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:51.240Z,1528885971.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:51.626Z,1528885971.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:51.645Z,1528885971.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:52.026Z,1528885972.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:52.044Z,1528885972.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:52.410Z,1528885972.410 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T10:32:52.410Z,1528885972.410 [NAL9602] Data Fault, FailCount= 4
2018-06-13T10:32:52.410Z,1528885972.410 [NAL9602](ERROR): Data Fault
2018-06-13T10:32:52.426Z,1528885972.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:52.444Z,1528885972.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:52.537Z,1528885972.537 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T10:32:52.809Z,1528885972.809 [NAL9602](INFO): Powering down
2018-06-13T10:32:52.826Z,1528885972.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:52.844Z,1528885972.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:53.230Z,1528885973.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:53.248Z,1528885973.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:53.624Z,1528885973.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:53.642Z,1528885973.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:53.725Z,1528885973.725 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T10:32:53.725Z,1528885973.725 [NAL9602] No Fault, FailCount= 4
2018-06-13T10:32:54.028Z,1528885974.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:54.045Z,1528885974.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:54.425Z,1528885974.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:54.442Z,1528885974.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:54.824Z,1528885974.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:54.842Z,1528885974.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:55.228Z,1528885975.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:55.246Z,1528885975.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:55.628Z,1528885975.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:55.646Z,1528885975.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:56.024Z,1528885976.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:56.042Z,1528885976.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:56.428Z,1528885976.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:56.447Z,1528885976.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:56.827Z,1528885976.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:56.845Z,1528885976.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:57.224Z,1528885977.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:57.243Z,1528885977.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:57.628Z,1528885977.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:57.646Z,1528885977.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:58.027Z,1528885978.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:58.045Z,1528885978.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:58.424Z,1528885978.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:58.442Z,1528885978.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:58.828Z,1528885978.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:58.846Z,1528885978.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:59.229Z,1528885979.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:59.247Z,1528885979.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:32:59.624Z,1528885979.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:32:59.642Z,1528885979.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:00.027Z,1528885980.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:00.049Z,1528885980.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:00.428Z,1528885980.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:00.445Z,1528885980.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:00.824Z,1528885980.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:00.842Z,1528885980.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:01.228Z,1528885981.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:01.246Z,1528885981.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:01.628Z,1528885981.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:01.646Z,1528885981.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:02.025Z,1528885982.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:02.043Z,1528885982.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:02.427Z,1528885982.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:02.450Z,1528885982.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:02.825Z,1528885982.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:02.848Z,1528885982.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:03.230Z,1528885983.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:03.248Z,1528885983.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:03.627Z,1528885983.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:03.657Z,1528885983.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:04.030Z,1528885984.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:04.047Z,1528885984.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:04.426Z,1528885984.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:04.444Z,1528885984.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:04.833Z,1528885984.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:04.851Z,1528885984.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:05.229Z,1528885985.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:05.247Z,1528885985.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:05.626Z,1528885985.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:05.648Z,1528885985.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:06.028Z,1528885986.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:06.059Z,1528885986.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:06.430Z,1528885986.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:06.447Z,1528885986.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:06.819Z,1528885986.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:06.849Z,1528885986.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:07.227Z,1528885987.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:07.251Z,1528885987.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:07.630Z,1528885987.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:07.647Z,1528885987.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:08.018Z,1528885988.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:08.058Z,1528885988.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:08.422Z,1528885988.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:08.456Z,1528885988.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:08.819Z,1528885988.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:08.856Z,1528885988.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:09.222Z,1528885989.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:09.252Z,1528885989.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:09.622Z,1528885989.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:09.672Z,1528885989.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:10.018Z,1528885990.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:10.036Z,1528885990.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:10.426Z,1528885990.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:10.465Z,1528885990.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:10.823Z,1528885990.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:10.841Z,1528885990.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:13.936Z,1528885993.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:13.970Z,1528885993.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:14.087Z,1528885994.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:14.121Z,1528885994.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:14.491Z,1528885994.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:14.528Z,1528885994.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:14.891Z,1528885994.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:14.920Z,1528885994.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:15.282Z,1528885995.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:15.311Z,1528885995.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:15.687Z,1528885995.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:15.720Z,1528885995.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:16.082Z,1528885996.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:16.100Z,1528885996.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:16.483Z,1528885996.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:16.500Z,1528885996.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:16.887Z,1528885996.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:16.904Z,1528885996.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:17.287Z,1528885997.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:17.304Z,1528885997.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:17.684Z,1528885997.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:17.702Z,1528885997.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:18.090Z,1528885998.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:18.108Z,1528885998.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:18.489Z,1528885998.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:18.507Z,1528885998.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:18.885Z,1528885998.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:18.903Z,1528885998.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:19.290Z,1528885999.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:19.308Z,1528885999.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:19.690Z,1528885999.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:19.707Z,1528885999.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:20.089Z,1528886000.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:20.107Z,1528886000.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:20.490Z,1528886000.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:20.508Z,1528886000.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:20.889Z,1528886000.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:20.907Z,1528886000.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:21.288Z,1528886001.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:21.306Z,1528886001.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:21.690Z,1528886001.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:21.708Z,1528886001.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:22.089Z,1528886002.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:22.107Z,1528886002.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:22.489Z,1528886002.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:22.507Z,1528886002.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:22.873Z,1528886002.873 [NAL9602](INFO): Powering up NAL9602
2018-06-13T10:33:22.891Z,1528886002.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:22.909Z,1528886002.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:23.289Z,1528886003.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:23.307Z,1528886003.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:23.688Z,1528886003.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:23.706Z,1528886003.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:24.090Z,1528886004.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:24.108Z,1528886004.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:24.490Z,1528886004.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:24.508Z,1528886004.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:24.887Z,1528886004.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:24.905Z,1528886004.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:25.290Z,1528886005.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:25.308Z,1528886005.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:25.690Z,1528886005.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:25.707Z,1528886005.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:26.088Z,1528886006.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:26.106Z,1528886006.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:26.490Z,1528886006.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:26.508Z,1528886006.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:26.888Z,1528886006.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:26.905Z,1528886006.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:27.289Z,1528886007.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:27.307Z,1528886007.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:27.686Z,1528886007.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:27.712Z,1528886007.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:28.088Z,1528886008.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:28.112Z,1528886008.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:28.497Z,1528886008.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:28.515Z,1528886008.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:28.884Z,1528886008.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:28.918Z,1528886008.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:29.292Z,1528886009.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:29.309Z,1528886009.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:29.688Z,1528886009.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:29.706Z,1528886009.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:30.091Z,1528886010.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:30.117Z,1528886010.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:30.493Z,1528886010.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:30.511Z,1528886010.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:30.889Z,1528886010.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:30.907Z,1528886010.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:31.293Z,1528886011.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:31.311Z,1528886011.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:31.692Z,1528886011.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:31.709Z,1528886011.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:32.092Z,1528886012.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:32.110Z,1528886012.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:32.491Z,1528886012.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:32.515Z,1528886012.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:32.892Z,1528886012.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:32.909Z,1528886012.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:33.293Z,1528886013.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:33.311Z,1528886013.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:33.702Z,1528886013.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:33.720Z,1528886013.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:34.071Z,1528886014.071 [NAL9602](INFO): NAL9602 initialized
2018-06-13T10:33:34.094Z,1528886014.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:34.119Z,1528886014.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:34.489Z,1528886014.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:34.507Z,1528886014.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:34.903Z,1528886014.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:34.921Z,1528886014.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:35.302Z,1528886015.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:35.320Z,1528886015.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:35.698Z,1528886015.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:35.716Z,1528886015.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:36.094Z,1528886016.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:36.115Z,1528886016.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:36.493Z,1528886016.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:36.511Z,1528886016.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:36.889Z,1528886016.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:36.907Z,1528886016.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:37.294Z,1528886017.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:37.313Z,1528886017.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:37.702Z,1528886017.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:37.720Z,1528886017.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:38.102Z,1528886018.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:38.120Z,1528886018.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:38.503Z,1528886018.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:38.520Z,1528886018.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:38.893Z,1528886018.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:38.911Z,1528886018.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:39.289Z,1528886019.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:39.307Z,1528886019.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:39.694Z,1528886019.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:39.712Z,1528886019.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:40.095Z,1528886020.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:40.113Z,1528886020.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:40.489Z,1528886020.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:40.507Z,1528886020.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:40.904Z,1528886020.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:40.922Z,1528886020.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:41.306Z,1528886021.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:41.324Z,1528886021.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:41.699Z,1528886021.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:41.717Z,1528886021.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:42.092Z,1528886022.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:42.122Z,1528886022.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:42.487Z,1528886022.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:42.520Z,1528886022.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:42.883Z,1528886022.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:42.914Z,1528886022.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:43.287Z,1528886023.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:43.315Z,1528886023.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:43.703Z,1528886023.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:43.722Z,1528886023.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:44.103Z,1528886024.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:44.128Z,1528886024.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:44.508Z,1528886024.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:44.526Z,1528886024.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:44.887Z,1528886024.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:44.915Z,1528886024.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:45.287Z,1528886025.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:45.314Z,1528886025.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:45.687Z,1528886025.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:45.715Z,1528886025.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:46.088Z,1528886026.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:46.116Z,1528886026.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:46.487Z,1528886026.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:46.514Z,1528886026.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:46.909Z,1528886026.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:46.926Z,1528886026.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:47.307Z,1528886027.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:47.325Z,1528886027.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:47.700Z,1528886027.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:47.724Z,1528886027.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:48.087Z,1528886028.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:48.124Z,1528886028.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:48.487Z,1528886028.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:48.515Z,1528886028.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:48.887Z,1528886028.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:48.916Z,1528886028.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:49.287Z,1528886029.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:49.316Z,1528886029.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:49.705Z,1528886029.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:49.723Z,1528886029.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:50.104Z,1528886030.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:50.122Z,1528886030.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:50.510Z,1528886030.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:50.527Z,1528886030.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:50.888Z,1528886030.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:50.928Z,1528886030.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:51.291Z,1528886031.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:51.319Z,1528886031.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:51.690Z,1528886031.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:51.728Z,1528886031.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:52.085Z,1528886032.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:52.115Z,1528886032.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:52.488Z,1528886032.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:52.522Z,1528886032.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:52.902Z,1528886032.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:52.932Z,1528886032.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:53.299Z,1528886033.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:53.327Z,1528886033.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:53.699Z,1528886033.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:53.727Z,1528886033.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:54.087Z,1528886034.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:54.123Z,1528886034.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:54.487Z,1528886034.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:54.506Z,1528886034.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:54.891Z,1528886034.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:54.910Z,1528886034.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:55.290Z,1528886035.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:55.309Z,1528886035.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:55.697Z,1528886035.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:55.733Z,1528886035.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:56.101Z,1528886036.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:56.119Z,1528886036.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:56.501Z,1528886036.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:56.520Z,1528886036.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:56.887Z,1528886036.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:56.919Z,1528886036.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:57.292Z,1528886037.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:57.310Z,1528886037.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:57.694Z,1528886037.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:57.712Z,1528886037.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:58.090Z,1528886038.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:58.108Z,1528886038.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:58.489Z,1528886038.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:58.507Z,1528886038.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:58.901Z,1528886038.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:58.920Z,1528886038.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:59.297Z,1528886039.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:59.315Z,1528886039.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:33:59.698Z,1528886039.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:33:59.716Z,1528886039.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:00.094Z,1528886040.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:00.111Z,1528886040.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:00.487Z,1528886040.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:00.512Z,1528886040.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:00.892Z,1528886040.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:00.910Z,1528886040.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:01.291Z,1528886041.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:01.323Z,1528886041.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:01.698Z,1528886041.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:01.716Z,1528886041.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:02.101Z,1528886042.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:02.119Z,1528886042.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:02.501Z,1528886042.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:02.520Z,1528886042.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:02.887Z,1528886042.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:02.911Z,1528886042.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:03.294Z,1528886043.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:03.312Z,1528886043.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:03.694Z,1528886043.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:03.711Z,1528886043.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:04.087Z,1528886044.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:04.112Z,1528886044.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:04.489Z,1528886044.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:04.507Z,1528886044.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:04.901Z,1528886044.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:04.919Z,1528886044.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:05.299Z,1528886045.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:05.317Z,1528886045.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:05.698Z,1528886045.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:05.716Z,1528886045.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:06.094Z,1528886046.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:06.112Z,1528886046.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:06.487Z,1528886046.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:06.511Z,1528886046.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:06.889Z,1528886046.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:06.907Z,1528886046.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:07.291Z,1528886047.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:07.318Z,1528886047.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:07.699Z,1528886047.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:07.724Z,1528886047.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:08.102Z,1528886048.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:08.120Z,1528886048.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:08.503Z,1528886048.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:08.524Z,1528886048.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:08.887Z,1528886048.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:08.911Z,1528886048.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:09.293Z,1528886049.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:09.311Z,1528886049.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:09.694Z,1528886049.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:09.711Z,1528886049.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:10.088Z,1528886050.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:10.114Z,1528886050.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:10.493Z,1528886050.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:10.511Z,1528886050.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:10.905Z,1528886050.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:10.923Z,1528886050.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:14.013Z,1528886054.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:14.048Z,1528886054.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:14.196Z,1528886054.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:14.249Z,1528886054.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:14.575Z,1528886054.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:14.604Z,1528886054.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:14.972Z,1528886054.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:15.003Z,1528886055.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:15.371Z,1528886055.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:15.409Z,1528886055.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:15.781Z,1528886055.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:15.810Z,1528886055.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:16.185Z,1528886056.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:16.221Z,1528886056.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:16.581Z,1528886056.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:16.620Z,1528886056.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:16.971Z,1528886056.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:16.989Z,1528886056.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:17.371Z,1528886057.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:17.390Z,1528886057.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:17.774Z,1528886057.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:17.792Z,1528886057.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:18.174Z,1528886058.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:18.193Z,1528886058.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:18.581Z,1528886058.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:18.600Z,1528886058.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:18.985Z,1528886058.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:19.004Z,1528886059.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:19.386Z,1528886059.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:19.405Z,1528886059.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:19.777Z,1528886059.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:19.795Z,1528886059.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:20.173Z,1528886060.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:20.191Z,1528886060.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:20.586Z,1528886060.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:20.604Z,1528886060.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:20.982Z,1528886060.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:21.000Z,1528886061.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:21.382Z,1528886061.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:21.402Z,1528886061.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:21.776Z,1528886061.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:21.802Z,1528886061.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:22.167Z,1528886062.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:22.201Z,1528886062.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:22.576Z,1528886062.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:22.601Z,1528886062.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:22.992Z,1528886062.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:23.011Z,1528886063.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:23.387Z,1528886063.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:23.406Z,1528886063.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:23.787Z,1528886063.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:23.806Z,1528886063.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:24.178Z,1528886064.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:24.198Z,1528886064.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:24.577Z,1528886064.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:24.601Z,1528886064.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:24.975Z,1528886064.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:24.000Z,1528886065.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:25.375Z,1528886065.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:25.399Z,1528886065.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:25.783Z,1528886065.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:25.802Z,1528886065.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:26.190Z,1528886066.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:26.210Z,1528886066.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:26.591Z,1528886066.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:26.610Z,1528886066.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:26.968Z,1528886066.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:27.004Z,1528886067.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:27.376Z,1528886067.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:27.401Z,1528886067.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:27.775Z,1528886067.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:27.799Z,1528886067.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:28.168Z,1528886068.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:28.205Z,1528886068.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:28.576Z,1528886068.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:28.600Z,1528886068.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:28.992Z,1528886068.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:29.011Z,1528886069.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:29.387Z,1528886069.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:29.406Z,1528886069.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:29.791Z,1528886069.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:29.816Z,1528886069.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:30.178Z,1528886070.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:30.204Z,1528886070.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:30.567Z,1528886070.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:30.604Z,1528886070.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:30.972Z,1528886070.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:31.003Z,1528886071.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:31.371Z,1528886071.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:31.412Z,1528886071.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:31.788Z,1528886071.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:31.807Z,1528886071.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:32.188Z,1528886072.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:32.207Z,1528886072.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:32.592Z,1528886072.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:32.616Z,1528886072.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:32.967Z,1528886072.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:33.005Z,1528886073.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:33.371Z,1528886073.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:33.408Z,1528886073.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:33.772Z,1528886073.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:33.799Z,1528886073.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:34.167Z,1528886074.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:34.188Z,1528886074.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:34.571Z,1528886074.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:34.589Z,1528886074.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:34.990Z,1528886074.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:35.018Z,1528886075.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:35.389Z,1528886075.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:35.418Z,1528886075.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:35.786Z,1528886075.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:35.830Z,1528886075.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:36.175Z,1528886076.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:36.193Z,1528886076.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:36.575Z,1528886076.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:36.594Z,1528886076.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:36.975Z,1528886076.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:36.993Z,1528886076.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:37.375Z,1528886077.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:37.393Z,1528886077.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:37.790Z,1528886077.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:37.828Z,1528886077.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:38.190Z,1528886078.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:38.222Z,1528886078.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:38.590Z,1528886078.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:38.623Z,1528886078.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:38.976Z,1528886078.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:38.995Z,1528886078.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:39.371Z,1528886079.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:39.390Z,1528886079.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:39.775Z,1528886079.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:39.794Z,1528886079.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:40.176Z,1528886080.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:40.194Z,1528886080.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:40.572Z,1528886080.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:40.592Z,1528886080.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:40.987Z,1528886080.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:41.022Z,1528886081.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:41.383Z,1528886081.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:41.424Z,1528886081.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:41.782Z,1528886081.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:41.801Z,1528886081.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:42.177Z,1528886082.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:42.201Z,1528886082.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:42.576Z,1528886082.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:42.595Z,1528886082.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:42.973Z,1528886082.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:42.991Z,1528886082.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:43.376Z,1528886083.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:43.416Z,1528886083.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:43.782Z,1528886083.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:43.806Z,1528886083.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:44.182Z,1528886084.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:44.200Z,1528886084.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:44.586Z,1528886084.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:44.604Z,1528886084.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:44.975Z,1528886084.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:45.009Z,1528886085.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:45.372Z,1528886085.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:45.391Z,1528886085.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:45.767Z,1528886085.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:45.804Z,1528886085.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:46.178Z,1528886086.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:46.196Z,1528886086.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:46.567Z,1528886086.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:46.600Z,1528886086.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:46.992Z,1528886086.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:47.010Z,1528886087.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:47.392Z,1528886087.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:47.416Z,1528886087.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:47.783Z,1528886087.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:47.802Z,1528886087.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:48.171Z,1528886088.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:48.207Z,1528886088.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:48.567Z,1528886088.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:48.604Z,1528886088.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:48.967Z,1528886088.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:49.005Z,1528886089.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:49.367Z,1528886089.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:49.385Z,1528886089.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:49.777Z,1528886089.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:49.808Z,1528886089.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:50.186Z,1528886090.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:50.216Z,1528886090.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:50.586Z,1528886090.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:50.620Z,1528886090.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:50.974Z,1528886090.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:50.992Z,1528886090.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:51.373Z,1528886091.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:51.469Z,1528886091.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:51.777Z,1528886091.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:51.795Z,1528886091.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:52.176Z,1528886092.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:52.194Z,1528886092.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:52.573Z,1528886092.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:52.591Z,1528886092.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:52.986Z,1528886092.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:53.004Z,1528886093.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:53.381Z,1528886093.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:53.404Z,1528886093.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:53.778Z,1528886093.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:53.796Z,1528886093.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:54.177Z,1528886094.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:54.195Z,1528886094.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:54.576Z,1528886094.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:54.594Z,1528886094.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:54.974Z,1528886094.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:54.992Z,1528886094.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:55.377Z,1528886095.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:55.395Z,1528886095.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:55.781Z,1528886095.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:55.800Z,1528886095.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:56.180Z,1528886096.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:56.205Z,1528886096.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:56.586Z,1528886096.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:56.604Z,1528886096.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:56.976Z,1528886096.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:56.995Z,1528886096.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:57.372Z,1528886097.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:57.391Z,1528886097.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:57.778Z,1528886097.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:57.796Z,1528886097.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:58.176Z,1528886098.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:58.195Z,1528886098.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:58.572Z,1528886098.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:58.591Z,1528886098.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:58.986Z,1528886098.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:59.004Z,1528886099.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:59.386Z,1528886099.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:59.404Z,1528886099.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:34:59.782Z,1528886099.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:34:59.801Z,1528886099.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:00.178Z,1528886100.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:00.196Z,1528886100.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:00.577Z,1528886100.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:00.596Z,1528886100.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:00.973Z,1528886100.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:00.991Z,1528886100.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:01.375Z,1528886101.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:01.406Z,1528886101.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:01.787Z,1528886101.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:01.805Z,1528886101.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:02.186Z,1528886102.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:02.204Z,1528886102.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:02.587Z,1528886102.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:02.606Z,1528886102.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:02.977Z,1528886102.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:02.995Z,1528886102.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:03.373Z,1528886103.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:03.391Z,1528886103.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:03.775Z,1528886103.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:03.801Z,1528886103.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:04.175Z,1528886104.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:04.214Z,1528886104.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:04.567Z,1528886104.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:04.604Z,1528886104.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:04.992Z,1528886104.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:05.016Z,1528886105.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:05.391Z,1528886105.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:05.410Z,1528886105.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:05.783Z,1528886105.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:05.802Z,1528886105.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:06.171Z,1528886106.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:06.210Z,1528886106.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:06.571Z,1528886106.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:06.611Z,1528886106.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:06.967Z,1528886106.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:07.002Z,1528886107.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:07.371Z,1528886107.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:07.408Z,1528886107.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:07.777Z,1528886107.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:07.806Z,1528886107.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:08.191Z,1528886108.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:08.210Z,1528886108.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:08.586Z,1528886108.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:08.612Z,1528886108.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:08.971Z,1528886108.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:09.013Z,1528886109.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:09.367Z,1528886109.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:09.385Z,1528886109.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:09.771Z,1528886109.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:09.789Z,1528886109.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:10.176Z,1528886110.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:10.194Z,1528886110.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:10.573Z,1528886110.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:10.592Z,1528886110.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:10.595Z,1528886110.595 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T10:35:10.595Z,1528886110.595 [Default:CheckIn:C.Wait] Stopped
2018-06-13T10:35:10.595Z,1528886110.595 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T10:35:10.595Z,1528886110.595 [Default:CheckIn:D] Running Loop=1
2018-06-13T10:35:10.989Z,1528886110.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:11.024Z,1528886111.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:11.031Z,1528886111.031 [Default:CheckIn:D] Stopped
2018-06-13T10:35:11.031Z,1528886111.031 [Default:CheckIn:E] Running Loop=1
2018-06-13T10:35:14.098Z,1528886114.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:14.132Z,1528886114.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:14.135Z,1528886114.135 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 427.959766 min 
2018-06-13T10:35:14.135Z,1528886114.135 [Default:CheckIn:E] Stopped
2018-06-13T10:35:14.135Z,1528886114.135 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T10:35:14.135Z,1528886114.135 [Default:CheckIn] Stopped
2018-06-13T10:35:14.136Z,1528886114.136 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T10:35:14.136Z,1528886114.136 [Default:CheckIn](INFO): Running loop #42
2018-06-13T10:35:14.136Z,1528886114.136 [Default:CheckIn] Running Loop=42
2018-06-13T10:35:14.136Z,1528886114.136 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T10:35:14.136Z,1528886114.136 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T10:35:14.270Z,1528886114.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:14.322Z,1528886114.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:14.656Z,1528886114.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:14.685Z,1528886114.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:15.056Z,1528886115.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:15.085Z,1528886115.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:15.450Z,1528886115.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:15.483Z,1528886115.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:15.871Z,1528886115.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:15.893Z,1528886115.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:16.270Z,1528886116.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:16.288Z,1528886116.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:16.657Z,1528886116.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:16.692Z,1528886116.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:17.051Z,1528886117.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:17.086Z,1528886117.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:17.455Z,1528886117.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:17.488Z,1528886117.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:17.851Z,1528886117.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:17.887Z,1528886117.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:18.252Z,1528886118.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:18.290Z,1528886118.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:18.651Z,1528886118.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:18.693Z,1528886118.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:19.060Z,1528886119.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:19.090Z,1528886119.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:19.465Z,1528886119.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:19.500Z,1528886119.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:19.865Z,1528886119.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:19.902Z,1528886119.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:20.247Z,1528886120.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:20.265Z,1528886120.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:20.651Z,1528886120.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:20.681Z,1528886120.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:21.051Z,1528886121.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:21.070Z,1528886121.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:21.451Z,1528886121.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:21.469Z,1528886121.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:21.869Z,1528886121.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:21.897Z,1528886121.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:22.269Z,1528886122.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:22.296Z,1528886122.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:22.665Z,1528886122.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:22.699Z,1528886122.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:23.055Z,1528886123.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:23.073Z,1528886123.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:23.455Z,1528886123.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:23.473Z,1528886123.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:23.851Z,1528886123.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:23.870Z,1528886123.870 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:23.870Z,1528886123.870 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 143
2018-06-13T10:35:23.870Z,1528886123.870 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:35:23.872Z,1528886123.872 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:23.872Z,1528886123.872 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 143
2018-06-13T10:35:23.872Z,1528886123.872 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:35:23.874Z,1528886123.874 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:23.874Z,1528886123.874 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 143
2018-06-13T10:35:23.874Z,1528886123.874 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:35:23.961Z,1528886123.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:35:23.961Z,1528886123.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:35:23.962Z,1528886123.962 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:35:24.261Z,1528886124.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:24.353Z,1528886124.353 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:35:24.353Z,1528886124.353 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 143
2018-06-13T10:35:24.354Z,1528886124.354 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:35:24.354Z,1528886124.354 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 143
2018-06-13T10:35:24.354Z,1528886124.354 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:35:24.354Z,1528886124.354 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 143
2018-06-13T10:35:24.656Z,1528886124.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:24.687Z,1528886124.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:35:24.688Z,1528886124.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:35:24.688Z,1528886124.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:35:24.688Z,1528886124.688 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:35:24.697Z,1528886124.697 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:35:24.697Z,1528886124.697 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:35:24.698Z,1528886124.698 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:35:24.698Z,1528886124.698 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:35:24.698Z,1528886124.698 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:35:25.069Z,1528886125.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:25.087Z,1528886125.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:35:25.088Z,1528886125.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:25.468Z,1528886125.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:25.492Z,1528886125.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:35:25.505Z,1528886125.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:25.872Z,1528886125.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:25.896Z,1528886125.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:35:25.917Z,1528886125.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:26.247Z,1528886126.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:26.287Z,1528886126.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:35:26.288Z,1528886126.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:26.658Z,1528886126.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:26.681Z,1528886126.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:35:26.682Z,1528886126.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:27.058Z,1528886127.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:27.082Z,1528886127.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:35:27.083Z,1528886127.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:27.447Z,1528886127.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:27.482Z,1528886127.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:35:27.483Z,1528886127.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:27.871Z,1528886127.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:27.889Z,1528886127.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:35:27.890Z,1528886127.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:28.272Z,1528886128.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:28.291Z,1528886128.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:35:28.292Z,1528886128.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:28.663Z,1528886128.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:28.682Z,1528886128.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:35:28.682Z,1528886128.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:29.052Z,1528886129.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:29.088Z,1528886129.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:35:29.094Z,1528886129.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:29.451Z,1528886129.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:29.478Z,1528886129.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:35:29.479Z,1528886129.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:29.847Z,1528886129.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:29.882Z,1528886129.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:35:29.883Z,1528886129.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:30.252Z,1528886130.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:30.287Z,1528886130.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:35:30.288Z,1528886130.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:30.651Z,1528886130.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:30.678Z,1528886130.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:35:30.679Z,1528886130.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:31.068Z,1528886131.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:31.086Z,1528886131.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:35:31.087Z,1528886131.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:31.472Z,1528886131.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:31.490Z,1528886131.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:35:31.491Z,1528886131.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:31.868Z,1528886131.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:31.885Z,1528886131.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:35:31.886Z,1528886131.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:32.247Z,1528886132.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:32.280Z,1528886132.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:35:32.282Z,1528886132.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:32.651Z,1528886132.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:32.685Z,1528886132.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:35:32.686Z,1528886132.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:33.047Z,1528886133.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:33.081Z,1528886133.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:35:33.082Z,1528886133.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:33.447Z,1528886133.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:33.464Z,1528886133.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:35:33.465Z,1528886133.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:33.865Z,1528886133.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:33.894Z,1528886133.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:35:33.895Z,1528886133.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:34.265Z,1528886134.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:34.293Z,1528886134.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:35:34.294Z,1528886134.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:34.661Z,1528886134.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:34.695Z,1528886134.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:35:34.696Z,1528886134.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:35.051Z,1528886135.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:35.069Z,1528886135.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:35:35.070Z,1528886135.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:35.455Z,1528886135.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:35.472Z,1528886135.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:35:35.473Z,1528886135.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:35.851Z,1528886135.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:35.868Z,1528886135.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:35:35.869Z,1528886135.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:36.255Z,1528886136.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:36.280Z,1528886136.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:35:36.297Z,1528886136.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:36.654Z,1528886136.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:36.672Z,1528886136.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:35:36.673Z,1528886136.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:37.058Z,1528886137.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:37.076Z,1528886137.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T10:35:37.077Z,1528886137.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:37.465Z,1528886137.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:37.483Z,1528886137.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:35:37.483Z,1528886137.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:37.865Z,1528886137.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:37.904Z,1528886137.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:35:37.906Z,1528886137.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:38.256Z,1528886138.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:38.273Z,1528886138.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:35:38.274Z,1528886138.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:38.658Z,1528886138.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:38.676Z,1528886138.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:35:38.677Z,1528886138.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:39.057Z,1528886139.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:39.074Z,1528886139.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T10:35:39.075Z,1528886139.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:39.453Z,1528886139.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:39.470Z,1528886139.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:35:39.471Z,1528886139.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:39.865Z,1528886139.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:39.883Z,1528886139.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:35:39.884Z,1528886139.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:40.265Z,1528886140.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:40.283Z,1528886140.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T10:35:40.284Z,1528886140.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:40.659Z,1528886140.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:40.676Z,1528886140.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:35:40.678Z,1528886140.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:41.058Z,1528886141.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:41.075Z,1528886141.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:35:41.076Z,1528886141.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:41.456Z,1528886141.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:41.474Z,1528886141.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:35:41.475Z,1528886141.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:41.853Z,1528886141.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:41.871Z,1528886141.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:35:41.871Z,1528886141.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:42.258Z,1528886142.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:42.275Z,1528886142.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T10:35:42.276Z,1528886142.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:42.657Z,1528886142.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:42.675Z,1528886142.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:35:42.676Z,1528886142.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:43.058Z,1528886143.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:43.076Z,1528886143.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T10:35:43.077Z,1528886143.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:43.465Z,1528886143.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:43.483Z,1528886143.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:35:43.484Z,1528886143.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:43.862Z,1528886143.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:43.880Z,1528886143.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:44.253Z,1528886144.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:44.271Z,1528886144.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:44.658Z,1528886144.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:44.675Z,1528886144.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:45.056Z,1528886145.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:45.082Z,1528886145.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:45.455Z,1528886145.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:45.473Z,1528886145.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:45.865Z,1528886145.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:45.883Z,1528886145.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:46.265Z,1528886146.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:46.283Z,1528886146.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:46.662Z,1528886146.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:46.680Z,1528886146.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:47.058Z,1528886147.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:47.075Z,1528886147.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:47.457Z,1528886147.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:47.480Z,1528886147.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:47.853Z,1528886147.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:47.871Z,1528886147.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:48.259Z,1528886148.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:48.277Z,1528886148.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:48.657Z,1528886148.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:48.675Z,1528886148.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:49.062Z,1528886149.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:49.080Z,1528886149.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:49.465Z,1528886149.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:49.484Z,1528886149.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:49.865Z,1528886149.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:49.883Z,1528886149.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:50.258Z,1528886150.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:50.276Z,1528886150.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:50.658Z,1528886150.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:50.675Z,1528886150.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:51.058Z,1528886151.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:51.076Z,1528886151.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:51.453Z,1528886151.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:51.471Z,1528886151.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:51.865Z,1528886151.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:51.883Z,1528886151.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:52.266Z,1528886152.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:52.284Z,1528886152.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:52.662Z,1528886152.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:52.680Z,1528886152.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:53.058Z,1528886153.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:53.076Z,1528886153.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:53.457Z,1528886153.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:53.480Z,1528886153.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:53.853Z,1528886153.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:53.871Z,1528886153.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:54.258Z,1528886154.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:54.276Z,1528886154.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:54.656Z,1528886154.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:54.674Z,1528886154.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:55.062Z,1528886155.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:55.081Z,1528886155.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:55.465Z,1528886155.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:55.483Z,1528886155.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:55.865Z,1528886155.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:55.883Z,1528886155.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:56.253Z,1528886156.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:56.271Z,1528886156.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:56.658Z,1528886156.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:56.675Z,1528886156.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:57.059Z,1528886157.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:57.077Z,1528886157.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:57.453Z,1528886157.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:57.471Z,1528886157.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:57.865Z,1528886157.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:57.883Z,1528886157.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:58.265Z,1528886158.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:58.283Z,1528886158.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:58.663Z,1528886158.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:58.680Z,1528886158.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:59.058Z,1528886159.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:59.077Z,1528886159.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:59.458Z,1528886159.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:59.476Z,1528886159.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:35:59.854Z,1528886159.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:35:59.871Z,1528886159.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:00.259Z,1528886160.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:00.277Z,1528886160.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:00.658Z,1528886160.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:00.676Z,1528886160.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:01.063Z,1528886161.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:01.082Z,1528886161.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:01.469Z,1528886161.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:01.487Z,1528886161.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:01.865Z,1528886161.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:01.883Z,1528886161.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:02.258Z,1528886162.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:02.276Z,1528886162.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:02.658Z,1528886162.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:02.688Z,1528886162.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:03.059Z,1528886163.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:03.077Z,1528886163.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:03.447Z,1528886163.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:03.484Z,1528886163.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:03.878Z,1528886163.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:03.904Z,1528886163.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:04.272Z,1528886164.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:04.290Z,1528886164.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:04.668Z,1528886164.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:04.686Z,1528886164.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:05.052Z,1528886165.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:05.091Z,1528886165.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:05.447Z,1528886165.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:05.485Z,1528886165.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:05.851Z,1528886165.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:05.886Z,1528886165.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:06.252Z,1528886166.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:06.297Z,1528886166.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:06.648Z,1528886166.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:06.682Z,1528886166.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:07.062Z,1528886167.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:07.096Z,1528886167.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:07.466Z,1528886167.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:07.509Z,1528886167.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:07.861Z,1528886167.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:07.895Z,1528886167.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:08.255Z,1528886168.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:08.272Z,1528886168.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:08.656Z,1528886168.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:08.674Z,1528886168.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:09.054Z,1528886169.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:09.080Z,1528886169.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:09.454Z,1528886169.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:09.472Z,1528886169.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:09.865Z,1528886169.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:09.883Z,1528886169.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:10.261Z,1528886170.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:10.279Z,1528886170.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:10.670Z,1528886170.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:10.688Z,1528886170.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:11.051Z,1528886171.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:11.075Z,1528886171.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:11.457Z,1528886171.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:11.476Z,1528886171.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:11.857Z,1528886171.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:11.875Z,1528886171.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:12.259Z,1528886172.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:12.277Z,1528886172.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:12.657Z,1528886172.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:12.680Z,1528886172.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:13.062Z,1528886173.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:13.080Z,1528886173.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:13.465Z,1528886173.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:13.483Z,1528886173.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:13.865Z,1528886173.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:13.883Z,1528886173.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:16.970Z,1528886176.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:16.988Z,1528886176.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:17.127Z,1528886177.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:17.168Z,1528886177.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:17.529Z,1528886177.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:17.567Z,1528886177.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:17.941Z,1528886177.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:17.968Z,1528886177.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:18.333Z,1528886178.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:18.367Z,1528886178.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:18.722Z,1528886178.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:18.741Z,1528886178.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:19.121Z,1528886179.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:19.139Z,1528886179.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:19.522Z,1528886179.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:19.544Z,1528886179.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:19.933Z,1528886179.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:19.951Z,1528886179.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:20.329Z,1528886180.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:20.347Z,1528886180.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:20.733Z,1528886180.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:20.752Z,1528886180.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:21.123Z,1528886181.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:21.141Z,1528886181.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:21.523Z,1528886181.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:21.541Z,1528886181.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:21.924Z,1528886181.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:21.942Z,1528886181.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:22.325Z,1528886182.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:22.342Z,1528886182.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:22.722Z,1528886182.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:22.739Z,1528886182.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:23.133Z,1528886183.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:23.151Z,1528886183.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:23.533Z,1528886183.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:23.551Z,1528886183.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:23.929Z,1528886183.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:23.947Z,1528886183.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:24.324Z,1528886184.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:24.342Z,1528886184.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:24.723Z,1528886184.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:24.741Z,1528886184.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:25.123Z,1528886185.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:25.140Z,1528886185.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:25.525Z,1528886185.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:25.543Z,1528886185.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:25.929Z,1528886185.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:25.947Z,1528886185.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:26.333Z,1528886186.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:26.351Z,1528886186.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:26.733Z,1528886186.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:26.751Z,1528886186.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:27.124Z,1528886187.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:27.141Z,1528886187.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:27.525Z,1528886187.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:27.543Z,1528886187.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:27.923Z,1528886187.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:27.954Z,1528886187.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:28.325Z,1528886188.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:28.343Z,1528886188.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:28.726Z,1528886188.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:28.744Z,1528886188.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:29.133Z,1528886189.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:29.151Z,1528886189.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:29.533Z,1528886189.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:29.550Z,1528886189.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:29.933Z,1528886189.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:29.951Z,1528886189.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:30.323Z,1528886190.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:30.355Z,1528886190.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:30.723Z,1528886190.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:30.755Z,1528886190.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:31.127Z,1528886191.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:31.145Z,1528886191.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:31.525Z,1528886191.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:31.543Z,1528886191.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:31.930Z,1528886191.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:31.947Z,1528886191.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:32.332Z,1528886192.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:32.350Z,1528886192.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:32.733Z,1528886192.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:32.751Z,1528886192.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:33.126Z,1528886193.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:33.143Z,1528886193.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:33.526Z,1528886193.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:33.544Z,1528886193.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:33.923Z,1528886193.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:33.954Z,1528886193.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:34.325Z,1528886194.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:34.343Z,1528886194.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:34.723Z,1528886194.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:34.749Z,1528886194.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:35.138Z,1528886195.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:35.155Z,1528886195.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:35.537Z,1528886195.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:35.555Z,1528886195.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:35.940Z,1528886195.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:35.964Z,1528886195.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:36.323Z,1528886196.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:36.357Z,1528886196.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:36.719Z,1528886196.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:36.752Z,1528886196.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:37.120Z,1528886197.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:37.148Z,1528886197.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:37.519Z,1528886197.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:37.546Z,1528886197.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:37.940Z,1528886197.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:37.957Z,1528886197.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:38.340Z,1528886198.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:38.358Z,1528886198.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:38.739Z,1528886198.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:38.757Z,1528886198.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:39.119Z,1528886199.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:39.147Z,1528886199.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:39.519Z,1528886199.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:39.547Z,1528886199.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:39.919Z,1528886199.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:39.947Z,1528886199.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:40.318Z,1528886200.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:40.346Z,1528886200.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:40.719Z,1528886200.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:40.748Z,1528886200.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:41.139Z,1528886201.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:41.157Z,1528886201.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:41.539Z,1528886201.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:41.557Z,1528886201.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:41.940Z,1528886201.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:41.959Z,1528886201.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:42.319Z,1528886202.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:42.353Z,1528886202.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:42.720Z,1528886202.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:42.752Z,1528886202.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:43.120Z,1528886203.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:43.150Z,1528886203.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:43.519Z,1528886203.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:43.551Z,1528886203.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:43.939Z,1528886203.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:43.958Z,1528886203.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:44.340Z,1528886204.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:44.358Z,1528886204.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:44.741Z,1528886204.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:44.759Z,1528886204.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:45.119Z,1528886205.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:45.156Z,1528886205.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:45.519Z,1528886205.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:45.554Z,1528886205.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:45.919Z,1528886205.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:45.945Z,1528886205.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:46.323Z,1528886206.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:46.362Z,1528886206.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:46.720Z,1528886206.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:46.738Z,1528886206.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:47.137Z,1528886207.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:47.165Z,1528886207.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:47.537Z,1528886207.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:47.566Z,1528886207.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:47.937Z,1528886207.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:47.966Z,1528886207.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:48.324Z,1528886208.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:48.342Z,1528886208.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:48.723Z,1528886208.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:48.764Z,1528886208.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:49.123Z,1528886209.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:49.142Z,1528886209.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:49.523Z,1528886209.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:49.542Z,1528886209.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:49.938Z,1528886209.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:49.968Z,1528886209.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:50.338Z,1528886210.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:50.372Z,1528886210.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:50.733Z,1528886210.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:36:50.768Z,1528886210.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:51.141Z,1528886211.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:51.541Z,1528886211.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:51.942Z,1528886211.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:52.349Z,1528886212.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:52.739Z,1528886212.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:53.148Z,1528886213.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:53.576Z,1528886213.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:53.947Z,1528886213.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:54.344Z,1528886214.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:54.742Z,1528886214.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:55.143Z,1528886215.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:55.548Z,1528886215.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:55.947Z,1528886215.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:56.347Z,1528886216.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:56.747Z,1528886216.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:57.142Z,1528886217.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:57.539Z,1528886217.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:57.941Z,1528886217.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:58.343Z,1528886218.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:58.740Z,1528886218.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:59.151Z,1528886219.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:59.551Z,1528886219.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:36:59.947Z,1528886219.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:00.341Z,1528886220.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:00.748Z,1528886220.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:01.141Z,1528886221.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:01.541Z,1528886221.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:01.947Z,1528886221.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:02.346Z,1528886222.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:02.747Z,1528886222.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:03.148Z,1528886223.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:03.539Z,1528886223.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:03.942Z,1528886223.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:04.342Z,1528886224.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:04.739Z,1528886224.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:05.152Z,1528886225.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:05.551Z,1528886225.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:05.947Z,1528886225.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:06.348Z,1528886226.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:06.742Z,1528886226.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:07.143Z,1528886227.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:07.541Z,1528886227.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:07.948Z,1528886227.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:08.347Z,1528886228.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:08.747Z,1528886228.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:09.141Z,1528886229.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:09.539Z,1528886229.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:09.944Z,1528886229.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:10.341Z,1528886230.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:10.742Z,1528886230.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:11.151Z,1528886231.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:14.276Z,1528886234.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:14.444Z,1528886234.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:14.826Z,1528886234.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:15.226Z,1528886235.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:15.604Z,1528886235.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:16.032Z,1528886236.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:16.440Z,1528886236.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:16.831Z,1528886236.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:17.232Z,1528886237.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:17.628Z,1528886237.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:18.008Z,1528886238.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:18.409Z,1528886238.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:18.823Z,1528886238.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:19.224Z,1528886239.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:19.623Z,1528886239.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:20.023Z,1528886240.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:20.414Z,1528886240.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:20.815Z,1528886240.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:21.216Z,1528886241.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:21.613Z,1528886241.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:22.023Z,1528886242.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:22.424Z,1528886242.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:22.828Z,1528886242.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:23.216Z,1528886243.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:23.617Z,1528886243.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:24.012Z,1528886244.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:24.416Z,1528886244.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:24.815Z,1528886244.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:25.228Z,1528886245.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:25.624Z,1528886245.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:26.024Z,1528886246.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:26.415Z,1528886246.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:26.816Z,1528886246.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:27.219Z,1528886247.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:27.613Z,1528886247.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:28.023Z,1528886248.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:28.425Z,1528886248.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:28.824Z,1528886248.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:29.216Z,1528886249.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:29.618Z,1528886249.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:30.013Z,1528886250.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:30.418Z,1528886250.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:30.827Z,1528886250.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:31.226Z,1528886251.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:31.629Z,1528886251.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:32.033Z,1528886252.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:32.419Z,1528886252.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:32.817Z,1528886252.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:33.220Z,1528886253.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:33.624Z,1528886253.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:34.026Z,1528886254.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:34.432Z,1528886254.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:34.827Z,1528886254.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:35.224Z,1528886255.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:35.625Z,1528886255.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:36.015Z,1528886256.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:36.418Z,1528886256.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:36.828Z,1528886256.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:37.228Z,1528886257.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:37.631Z,1528886257.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:38.031Z,1528886258.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:38.414Z,1528886258.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:38.817Z,1528886258.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:39.224Z,1528886259.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:39.620Z,1528886259.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:40.026Z,1528886260.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:40.430Z,1528886260.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:40.829Z,1528886260.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:41.216Z,1528886261.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:41.618Z,1528886261.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:42.016Z,1528886262.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:42.417Z,1528886262.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:42.818Z,1528886262.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:43.226Z,1528886263.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:43.629Z,1528886263.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:44.042Z,1528886264.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:44.416Z,1528886264.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:44.816Z,1528886264.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:45.227Z,1528886265.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:45.622Z,1528886265.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:46.026Z,1528886266.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:46.438Z,1528886266.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:46.832Z,1528886266.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:47.224Z,1528886267.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:47.621Z,1528886267.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:48.008Z,1528886268.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:48.409Z,1528886268.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:48.814Z,1528886268.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:49.239Z,1528886269.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:49.623Z,1528886269.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:50.023Z,1528886270.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:50.414Z,1528886270.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:50.814Z,1528886270.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:51.217Z,1528886271.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:51.610Z,1528886271.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:52.019Z,1528886272.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:52.423Z,1528886272.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:52.817Z,1528886272.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:53.220Z,1528886273.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:53.620Z,1528886273.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:54.012Z,1528886274.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:54.413Z,1528886274.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:54.814Z,1528886274.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:55.220Z,1528886275.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:55.628Z,1528886275.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:56.023Z,1528886276.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:56.415Z,1528886276.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:56.815Z,1528886276.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:57.217Z,1528886277.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:57.613Z,1528886277.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:58.024Z,1528886278.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:58.423Z,1528886278.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:58.824Z,1528886278.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:59.215Z,1528886279.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:37:59.615Z,1528886279.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:00.012Z,1528886280.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:00.420Z,1528886280.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:00.823Z,1528886280.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:01.224Z,1528886281.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:01.623Z,1528886281.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:02.023Z,1528886282.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:02.413Z,1528886282.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:02.815Z,1528886282.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:03.216Z,1528886283.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:03.612Z,1528886283.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:04.024Z,1528886284.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:04.424Z,1528886284.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:04.824Z,1528886284.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:05.216Z,1528886285.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:05.626Z,1528886285.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:06.014Z,1528886286.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:06.517Z,1528886286.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:06.805Z,1528886286.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:07.231Z,1528886287.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:07.630Z,1528886287.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:08.032Z,1528886288.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:08.408Z,1528886288.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:08.828Z,1528886288.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:09.210Z,1528886289.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:09.608Z,1528886289.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:10.035Z,1528886290.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:10.436Z,1528886290.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:10.834Z,1528886290.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:11.213Z,1528886291.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:14.342Z,1528886294.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:14.488Z,1528886294.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:14.896Z,1528886294.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:15.294Z,1528886295.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:15.692Z,1528886295.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:16.085Z,1528886296.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:16.466Z,1528886296.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:16.869Z,1528886296.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:17.294Z,1528886297.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:17.692Z,1528886297.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:18.091Z,1528886298.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:18.466Z,1528886298.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:18.866Z,1528886298.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:19.271Z,1528886299.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:19.669Z,1528886299.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:20.089Z,1528886300.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:20.480Z,1528886300.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:20.876Z,1528886300.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:21.268Z,1528886301.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:21.676Z,1528886301.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:22.070Z,1528886302.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:22.467Z,1528886302.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:22.870Z,1528886302.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:23.275Z,1528886303.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:23.674Z,1528886303.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:24.075Z,1528886304.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:24.469Z,1528886304.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:24.867Z,1528886304.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:24.867Z,1528886304.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 144
2018-06-13T10:38:24.867Z,1528886304.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:38:24.869Z,1528886304.869 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:24.869Z,1528886304.869 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 144
2018-06-13T10:38:24.869Z,1528886304.869 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:38:24.871Z,1528886304.871 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:24.871Z,1528886304.871 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 144
2018-06-13T10:38:24.871Z,1528886304.871 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:38:24.945Z,1528886304.945 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:38:24.945Z,1528886304.945 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:38:24.946Z,1528886304.946 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:38:25.349Z,1528886305.349 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:38:25.349Z,1528886305.349 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 144
2018-06-13T10:38:25.350Z,1528886305.350 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:38:25.350Z,1528886305.350 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 144
2018-06-13T10:38:25.350Z,1528886305.350 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:38:25.350Z,1528886305.350 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 144
2018-06-13T10:38:25.674Z,1528886305.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:38:25.675Z,1528886305.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:38:25.675Z,1528886305.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:38:25.675Z,1528886305.675 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:38:25.676Z,1528886305.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:38:25.676Z,1528886305.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:38:25.676Z,1528886305.676 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:38:25.681Z,1528886305.681 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:38:25.681Z,1528886305.681 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:38:26.080Z,1528886306.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:38:26.081Z,1528886306.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:26.480Z,1528886306.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:38:26.481Z,1528886306.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:26.884Z,1528886306.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:38:26.886Z,1528886306.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:27.270Z,1528886307.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:38:27.271Z,1528886307.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:27.671Z,1528886307.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:38:27.672Z,1528886307.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:28.070Z,1528886308.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:38:28.071Z,1528886308.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:28.476Z,1528886308.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:38:28.477Z,1528886308.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:28.870Z,1528886308.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:38:28.871Z,1528886308.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:29.284Z,1528886309.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:38:29.285Z,1528886309.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:29.681Z,1528886309.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:38:29.682Z,1528886309.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:30.083Z,1528886310.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:38:30.084Z,1528886310.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:30.470Z,1528886310.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:38:30.471Z,1528886310.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:30.869Z,1528886310.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:38:30.870Z,1528886310.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:31.271Z,1528886311.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:38:31.272Z,1528886311.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:31.670Z,1528886311.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:38:31.671Z,1528886311.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:32.087Z,1528886312.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:38:32.088Z,1528886312.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:32.488Z,1528886312.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:38:32.489Z,1528886312.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:32.880Z,1528886312.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:38:32.881Z,1528886312.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:33.270Z,1528886313.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:38:33.271Z,1528886313.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:33.670Z,1528886313.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:38:33.671Z,1528886313.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:34.070Z,1528886314.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:38:34.071Z,1528886314.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:34.470Z,1528886314.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:38:34.471Z,1528886314.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:34.872Z,1528886314.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:38:34.873Z,1528886314.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:35.280Z,1528886315.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:38:35.281Z,1528886315.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:35.683Z,1528886315.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:38:35.684Z,1528886315.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:36.083Z,1528886316.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:38:36.084Z,1528886316.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:36.469Z,1528886316.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:38:36.470Z,1528886316.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:36.875Z,1528886316.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:38:36.876Z,1528886316.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:37.276Z,1528886317.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:38:37.277Z,1528886317.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:37.670Z,1528886317.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:38:37.671Z,1528886317.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:38.080Z,1528886318.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T10:38:38.081Z,1528886318.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:38.483Z,1528886318.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:38:38.484Z,1528886318.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:38.880Z,1528886318.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:38:38.881Z,1528886318.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:39.270Z,1528886319.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:38:39.271Z,1528886319.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:39.672Z,1528886319.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:38:39.673Z,1528886319.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:40.071Z,1528886320.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T10:38:40.072Z,1528886320.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:40.471Z,1528886320.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:38:40.472Z,1528886320.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:40.872Z,1528886320.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:38:40.873Z,1528886320.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:41.280Z,1528886321.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T10:38:41.281Z,1528886321.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:41.680Z,1528886321.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:38:41.681Z,1528886321.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:42.080Z,1528886322.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:38:42.082Z,1528886322.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:42.472Z,1528886322.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:38:42.472Z,1528886322.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:42.869Z,1528886322.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:38:42.870Z,1528886322.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:43.330Z,1528886323.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T10:38:43.331Z,1528886323.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:43.670Z,1528886323.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:38:43.671Z,1528886323.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:44.084Z,1528886324.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T10:38:44.085Z,1528886324.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:44.483Z,1528886324.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:38:44.484Z,1528886324.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:44.884Z,1528886324.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:45.269Z,1528886325.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:45.670Z,1528886325.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:46.073Z,1528886326.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:46.471Z,1528886326.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:46.870Z,1528886326.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:47.281Z,1528886327.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:47.681Z,1528886327.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:48.084Z,1528886328.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:48.472Z,1528886328.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:48.870Z,1528886328.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:49.271Z,1528886329.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:49.671Z,1528886329.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:50.097Z,1528886330.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:50.495Z,1528886330.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:50.897Z,1528886330.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:51.267Z,1528886331.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:51.672Z,1528886331.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:52.068Z,1528886332.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:52.468Z,1528886332.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:52.869Z,1528886332.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:53.295Z,1528886333.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:53.674Z,1528886333.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:54.079Z,1528886334.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:54.468Z,1528886334.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:54.870Z,1528886334.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:55.272Z,1528886335.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:55.675Z,1528886335.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:56.078Z,1528886336.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:56.480Z,1528886336.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:56.879Z,1528886336.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:57.273Z,1528886337.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:57.671Z,1528886337.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:58.084Z,1528886338.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:58.480Z,1528886338.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:58.876Z,1528886338.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:59.282Z,1528886339.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:38:59.672Z,1528886339.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:00.080Z,1528886340.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:00.488Z,1528886340.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:00.881Z,1528886340.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:01.271Z,1528886341.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:01.671Z,1528886341.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:02.085Z,1528886342.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:02.484Z,1528886342.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:02.884Z,1528886342.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:03.271Z,1528886343.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:03.670Z,1528886343.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:04.084Z,1528886344.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:04.484Z,1528886344.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:04.884Z,1528886344.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:05.273Z,1528886345.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:05.671Z,1528886345.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:06.086Z,1528886346.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:06.484Z,1528886346.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:06.883Z,1528886346.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:07.274Z,1528886347.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:07.670Z,1528886347.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:08.084Z,1528886348.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:08.488Z,1528886348.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:08.880Z,1528886348.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:09.272Z,1528886349.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:09.670Z,1528886349.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:10.080Z,1528886350.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:10.488Z,1528886350.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:10.884Z,1528886350.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:11.272Z,1528886351.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:14.382Z,1528886354.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:14.533Z,1528886354.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:14.936Z,1528886354.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:15.330Z,1528886355.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:15.719Z,1528886355.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:16.116Z,1528886356.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:16.524Z,1528886356.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:16.912Z,1528886356.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:17.326Z,1528886357.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:17.724Z,1528886357.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:18.121Z,1528886358.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:18.516Z,1528886358.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:18.923Z,1528886358.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:19.313Z,1528886359.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:19.716Z,1528886359.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:20.128Z,1528886360.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:20.525Z,1528886360.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:20.925Z,1528886360.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:21.318Z,1528886361.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:21.712Z,1528886361.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:22.126Z,1528886362.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:22.525Z,1528886362.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:22.922Z,1528886362.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:23.317Z,1528886363.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:23.717Z,1528886363.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:24.125Z,1528886364.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:24.528Z,1528886364.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:24.939Z,1528886364.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:25.313Z,1528886365.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:25.720Z,1528886365.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:26.129Z,1528886366.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:26.525Z,1528886366.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:26.926Z,1528886366.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:27.313Z,1528886367.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:27.724Z,1528886367.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:28.125Z,1528886368.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:28.536Z,1528886368.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:28.925Z,1528886368.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:29.317Z,1528886369.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:29.720Z,1528886369.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:30.125Z,1528886370.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:30.529Z,1528886370.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:30.936Z,1528886370.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:31.313Z,1528886371.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:31.716Z,1528886371.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:32.125Z,1528886372.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:32.525Z,1528886372.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:32.925Z,1528886372.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:33.318Z,1528886373.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:33.716Z,1528886373.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:34.125Z,1528886374.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:34.526Z,1528886374.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:34.921Z,1528886374.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:35.318Z,1528886375.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:35.718Z,1528886375.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:36.121Z,1528886376.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:36.530Z,1528886376.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:36.936Z,1528886376.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:37.322Z,1528886377.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:37.722Z,1528886377.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:38.132Z,1528886378.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:38.535Z,1528886378.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:38.932Z,1528886378.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:39.335Z,1528886379.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:39.706Z,1528886379.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:40.132Z,1528886380.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:40.533Z,1528886380.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:40.935Z,1528886380.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:41.311Z,1528886381.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:41.708Z,1528886381.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:42.140Z,1528886382.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:42.536Z,1528886382.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:42.944Z,1528886382.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:43.344Z,1528886383.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:43.716Z,1528886383.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:44.143Z,1528886384.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:44.539Z,1528886384.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:44.947Z,1528886384.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:45.314Z,1528886385.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:45.713Z,1528886385.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:46.120Z,1528886386.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:46.549Z,1528886386.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:46.927Z,1528886386.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:47.315Z,1528886387.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:47.713Z,1528886387.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:48.120Z,1528886388.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:48.527Z,1528886388.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:48.926Z,1528886388.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:49.311Z,1528886389.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:49.718Z,1528886389.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:50.127Z,1528886390.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:50.523Z,1528886390.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:50.920Z,1528886390.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:51.319Z,1528886391.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:51.715Z,1528886391.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:52.127Z,1528886392.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:52.522Z,1528886392.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:52.938Z,1528886392.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:53.318Z,1528886393.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:53.718Z,1528886393.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:54.124Z,1528886394.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:54.528Z,1528886394.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:54.925Z,1528886394.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:55.318Z,1528886395.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:55.716Z,1528886395.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:56.124Z,1528886396.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:56.520Z,1528886396.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:56.923Z,1528886396.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:57.319Z,1528886397.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:57.717Z,1528886397.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:58.122Z,1528886398.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:58.526Z,1528886398.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:58.923Z,1528886398.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:59.317Z,1528886399.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:39:59.699Z,1528886399.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:39:59.741Z,1528886399.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:00.099Z,1528886400.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:00.117Z,1528886400.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:00.505Z,1528886400.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:00.523Z,1528886400.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:00.908Z,1528886400.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:00.951Z,1528886400.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:01.304Z,1528886401.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:01.336Z,1528886401.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:01.692Z,1528886401.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:01.718Z,1528886401.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:02.098Z,1528886402.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:02.116Z,1528886402.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:02.494Z,1528886402.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:02.520Z,1528886402.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:02.896Z,1528886402.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:02.927Z,1528886402.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:03.305Z,1528886403.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:03.324Z,1528886403.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:03.705Z,1528886403.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:03.723Z,1528886403.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:04.104Z,1528886404.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:04.128Z,1528886404.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:04.499Z,1528886404.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:04.530Z,1528886404.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:04.896Z,1528886404.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:04.914Z,1528886404.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:05.302Z,1528886405.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:05.320Z,1528886405.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:05.699Z,1528886405.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:05.721Z,1528886405.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:06.092Z,1528886406.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:06.119Z,1528886406.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:06.506Z,1528886406.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:06.530Z,1528886406.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:06.905Z,1528886406.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:06.928Z,1528886406.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:07.305Z,1528886407.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:07.326Z,1528886407.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:07.696Z,1528886407.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:07.721Z,1528886407.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:08.102Z,1528886408.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:08.120Z,1528886408.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:08.496Z,1528886408.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:08.514Z,1528886408.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:08.895Z,1528886408.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:08.947Z,1528886408.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:09.310Z,1528886409.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:09.352Z,1528886409.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:09.710Z,1528886409.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:09.732Z,1528886409.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:10.106Z,1528886410.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:10.128Z,1528886410.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:10.498Z,1528886410.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:10.532Z,1528886410.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:10.898Z,1528886410.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:10.953Z,1528886410.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:11.305Z,1528886411.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:11.324Z,1528886411.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:11.701Z,1528886411.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:11.719Z,1528886411.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:12.095Z,1528886412.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:12.136Z,1528886412.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:12.508Z,1528886412.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:12.551Z,1528886412.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:15.622Z,1528886415.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:15.663Z,1528886415.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:15.667Z,1528886415.667 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T10:35:14.1Z
2018-06-13T10:40:15.667Z,1528886415.667 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T10:40:15.667Z,1528886415.667 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T10:40:15.795Z,1528886415.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:15.814Z,1528886415.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:16.931Z,1528886416.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:16.958Z,1528886416.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:17.072Z,1528886417.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:17.111Z,1528886417.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:17.495Z,1528886417.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:17.513Z,1528886417.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:17.902Z,1528886417.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:17.919Z,1528886417.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:18.295Z,1528886418.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:18.313Z,1528886418.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:18.679Z,1528886418.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:18.706Z,1528886418.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:19.079Z,1528886419.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:19.108Z,1528886419.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:22.211Z,1528886422.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:22.230Z,1528886422.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:22.329Z,1528886422.329 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0168.lzma
2018-06-13T10:40:22.366Z,1528886422.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:22.408Z,1528886422.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:22.769Z,1528886422.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:22.803Z,1528886422.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:23.130Z,1528886423.130 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0168.lzma.bak
2018-06-13T10:40:23.130Z,1528886423.130 [DataOverHttps](INFO): SBD MOMSN=8329072
2018-06-13T10:40:23.177Z,1528886423.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:23.210Z,1528886423.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:25.082Z,1528886425.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:25.110Z,1528886425.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:25.219Z,1528886425.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:25.264Z,1528886425.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:25.627Z,1528886425.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:25.659Z,1528886425.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:28.745Z,1528886428.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:28.764Z,1528886428.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:28.887Z,1528886428.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:28.932Z,1528886428.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:29.312Z,1528886429.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:29.331Z,1528886429.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:29.710Z,1528886429.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:29.756Z,1528886429.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:30.110Z,1528886430.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:30.132Z,1528886430.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:30.502Z,1528886430.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:30.529Z,1528886430.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:30.891Z,1528886430.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:30.924Z,1528886430.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:31.291Z,1528886431.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:31.324Z,1528886431.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:31.702Z,1528886431.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:31.719Z,1528886431.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:34.812Z,1528886434.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:34.830Z,1528886434.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:34.921Z,1528886434.921 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0169.lzma
2018-06-13T10:40:34.965Z,1528886434.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:35.005Z,1528886435.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:35.366Z,1528886435.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:35.388Z,1528886435.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:35.725Z,1528886435.725 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0169.lzma.bak
2018-06-13T10:40:35.725Z,1528886435.725 [DataOverHttps](INFO): SBD MOMSN=8329074
2018-06-13T10:40:35.774Z,1528886435.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:35.792Z,1528886435.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:37.629Z,1528886437.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:37.663Z,1528886437.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:37.666Z,1528886437.666 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T10:40:37.667Z,1528886437.667 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T10:40:37.667Z,1528886437.667 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T10:40:37.787Z,1528886437.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:37.823Z,1528886437.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:38.214Z,1528886438.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:38.231Z,1528886438.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:41.325Z,1528886441.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:41.374Z,1528886441.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:41.511Z,1528886441.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:41.531Z,1528886441.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:41.887Z,1528886441.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:41.917Z,1528886441.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:42.291Z,1528886442.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:42.330Z,1528886442.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:42.688Z,1528886442.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:42.713Z,1528886442.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:43.083Z,1528886443.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:43.101Z,1528886443.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:43.497Z,1528886443.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:43.530Z,1528886443.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:43.901Z,1528886443.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:43.926Z,1528886443.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:44.305Z,1528886444.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:44.332Z,1528886444.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:44.691Z,1528886444.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:44.730Z,1528886444.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:45.087Z,1528886445.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:45.124Z,1528886445.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:45.489Z,1528886445.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:45.507Z,1528886445.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:45.894Z,1528886445.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:45.912Z,1528886445.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:46.294Z,1528886446.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:46.312Z,1528886446.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:46.701Z,1528886446.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:46.719Z,1528886446.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:47.098Z,1528886447.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:47.115Z,1528886447.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:47.490Z,1528886447.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:47.520Z,1528886447.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:47.894Z,1528886447.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:47.912Z,1528886447.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:48.287Z,1528886448.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:48.310Z,1528886448.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:48.691Z,1528886448.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:48.723Z,1528886448.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:49.089Z,1528886449.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:49.107Z,1528886449.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:49.496Z,1528886449.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:49.528Z,1528886449.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:49.906Z,1528886449.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:49.924Z,1528886449.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:50.307Z,1528886450.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:50.328Z,1528886450.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:50.683Z,1528886450.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:50.719Z,1528886450.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:51.093Z,1528886451.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:51.110Z,1528886451.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:51.484Z,1528886451.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:51.531Z,1528886451.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:51.884Z,1528886451.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:51.933Z,1528886451.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:52.306Z,1528886452.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:52.399Z,1528886452.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:52.705Z,1528886452.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:52.741Z,1528886452.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:53.093Z,1528886453.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:53.205Z,1528886453.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:53.489Z,1528886453.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:53.616Z,1528886453.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:53.891Z,1528886453.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:53.930Z,1528886453.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:54.283Z,1528886454.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:54.301Z,1528886454.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:54.688Z,1528886454.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:54.722Z,1528886454.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:55.087Z,1528886455.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:55.104Z,1528886455.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:55.498Z,1528886455.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:55.532Z,1528886455.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:55.900Z,1528886455.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:55.930Z,1528886455.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:56.301Z,1528886456.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:56.329Z,1528886456.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:56.683Z,1528886456.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:56.708Z,1528886456.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:57.091Z,1528886457.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:57.132Z,1528886457.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:57.491Z,1528886457.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:57.509Z,1528886457.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:57.890Z,1528886457.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:57.908Z,1528886457.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:58.301Z,1528886458.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:58.335Z,1528886458.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:58.701Z,1528886458.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:58.718Z,1528886458.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:59.101Z,1528886459.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:59.119Z,1528886459.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:59.491Z,1528886459.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:59.509Z,1528886459.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:40:59.892Z,1528886459.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:40:59.910Z,1528886459.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:00.286Z,1528886460.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:00.316Z,1528886460.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:00.692Z,1528886460.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:00.710Z,1528886460.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:01.092Z,1528886461.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:01.109Z,1528886461.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:01.498Z,1528886461.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:01.516Z,1528886461.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:01.901Z,1528886461.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:01.919Z,1528886461.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:02.301Z,1528886462.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:02.319Z,1528886462.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:02.691Z,1528886462.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:02.716Z,1528886462.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:03.091Z,1528886463.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:03.109Z,1528886463.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:03.492Z,1528886463.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:03.521Z,1528886463.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:03.892Z,1528886463.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:03.910Z,1528886463.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:04.301Z,1528886464.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:04.319Z,1528886464.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:04.701Z,1528886464.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:04.719Z,1528886464.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:05.098Z,1528886465.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:05.116Z,1528886465.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:05.491Z,1528886465.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:05.516Z,1528886465.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:05.892Z,1528886465.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:05.910Z,1528886465.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:06.292Z,1528886466.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:06.310Z,1528886466.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:06.692Z,1528886466.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:06.710Z,1528886466.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:07.093Z,1528886467.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:07.116Z,1528886467.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:07.501Z,1528886467.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:07.519Z,1528886467.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:07.901Z,1528886467.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:07.919Z,1528886467.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:08.301Z,1528886468.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:08.320Z,1528886468.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:08.693Z,1528886468.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:08.711Z,1528886468.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:09.094Z,1528886469.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:09.111Z,1528886469.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:09.494Z,1528886469.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:09.520Z,1528886469.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:09.893Z,1528886469.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:09.911Z,1528886469.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:10.298Z,1528886470.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:10.320Z,1528886470.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:10.701Z,1528886470.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:10.719Z,1528886470.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:11.099Z,1528886471.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:11.116Z,1528886471.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:11.493Z,1528886471.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:11.511Z,1528886471.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:11.894Z,1528886471.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:11.911Z,1528886471.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:12.293Z,1528886472.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:12.316Z,1528886472.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:12.694Z,1528886472.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:12.711Z,1528886472.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:13.095Z,1528886473.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:13.114Z,1528886473.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:13.499Z,1528886473.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:13.516Z,1528886473.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:13.901Z,1528886473.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:13.919Z,1528886473.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:14.301Z,1528886474.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:14.319Z,1528886474.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:14.690Z,1528886474.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:14.708Z,1528886474.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:15.087Z,1528886475.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:15.111Z,1528886475.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:15.488Z,1528886475.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:15.520Z,1528886475.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:15.892Z,1528886475.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:15.910Z,1528886475.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:16.298Z,1528886476.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:16.317Z,1528886476.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:16.702Z,1528886476.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:16.744Z,1528886476.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:17.101Z,1528886477.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:17.119Z,1528886477.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:17.494Z,1528886477.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:17.512Z,1528886477.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:17.895Z,1528886477.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:17.914Z,1528886477.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:18.294Z,1528886478.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:18.312Z,1528886478.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:18.694Z,1528886478.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:18.713Z,1528886478.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:19.094Z,1528886479.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:19.113Z,1528886479.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:19.499Z,1528886479.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:19.518Z,1528886479.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:19.902Z,1528886479.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:19.922Z,1528886479.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:20.303Z,1528886480.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:20.322Z,1528886480.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:20.690Z,1528886480.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:20.712Z,1528886480.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:21.093Z,1528886481.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:21.110Z,1528886481.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:21.495Z,1528886481.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:21.513Z,1528886481.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:21.887Z,1528886481.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:21.910Z,1528886481.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:22.302Z,1528886482.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:22.324Z,1528886482.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:22.707Z,1528886482.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:22.725Z,1528886482.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:23.098Z,1528886483.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:23.120Z,1528886483.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:23.483Z,1528886483.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:23.519Z,1528886483.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:23.894Z,1528886483.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:23.916Z,1528886483.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:24.283Z,1528886484.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:24.319Z,1528886484.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:24.694Z,1528886484.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:24.720Z,1528886484.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:25.094Z,1528886485.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:25.112Z,1528886485.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:25.500Z,1528886485.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:25.524Z,1528886485.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:25.907Z,1528886485.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:25.925Z,1528886485.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:25.925Z,1528886485.925 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 145
2018-06-13T10:41:25.925Z,1528886485.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:41:25.927Z,1528886485.927 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:25.927Z,1528886485.927 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 145
2018-06-13T10:41:25.927Z,1528886485.927 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:41:25.929Z,1528886485.929 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:25.929Z,1528886485.929 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 145
2018-06-13T10:41:25.929Z,1528886485.929 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:41:26.001Z,1528886486.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:41:26.001Z,1528886486.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:41:26.002Z,1528886486.002 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:41:26.301Z,1528886486.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:26.401Z,1528886486.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:41:26.401Z,1528886486.401 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 145
2018-06-13T10:41:26.402Z,1528886486.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:41:26.402Z,1528886486.402 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 145
2018-06-13T10:41:26.403Z,1528886486.403 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:41:26.403Z,1528886486.403 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 145
2018-06-13T10:41:26.683Z,1528886486.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:26.712Z,1528886486.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:41:26.712Z,1528886486.712 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:41:26.712Z,1528886486.712 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:41:26.717Z,1528886486.717 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:41:26.717Z,1528886486.717 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:41:26.718Z,1528886486.718 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:41:26.718Z,1528886486.718 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:41:26.718Z,1528886486.718 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:41:26.719Z,1528886486.719 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:41:27.087Z,1528886487.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:27.120Z,1528886487.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:41:27.125Z,1528886487.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:27.488Z,1528886487.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:27.522Z,1528886487.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:41:27.523Z,1528886487.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:27.887Z,1528886487.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:27.904Z,1528886487.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:41:27.905Z,1528886487.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:28.297Z,1528886488.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:28.331Z,1528886488.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:41:28.332Z,1528886488.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:28.701Z,1528886488.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:28.739Z,1528886488.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:41:28.740Z,1528886488.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:29.101Z,1528886489.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:29.135Z,1528886489.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:41:29.136Z,1528886489.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:29.491Z,1528886489.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:29.508Z,1528886489.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:41:29.510Z,1528886489.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:29.893Z,1528886489.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:29.910Z,1528886489.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:41:29.911Z,1528886489.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:30.294Z,1528886490.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:30.312Z,1528886490.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:41:30.313Z,1528886490.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:30.701Z,1528886490.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:30.718Z,1528886490.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:41:30.719Z,1528886490.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:31.101Z,1528886491.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:31.142Z,1528886491.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:41:31.143Z,1528886491.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:31.492Z,1528886491.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:31.511Z,1528886491.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:41:31.512Z,1528886491.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:31.892Z,1528886491.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:31.909Z,1528886491.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:41:31.910Z,1528886491.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:32.305Z,1528886492.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:32.339Z,1528886492.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:41:32.340Z,1528886492.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:32.701Z,1528886492.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:32.719Z,1528886492.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:41:32.720Z,1528886492.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:33.097Z,1528886493.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:33.115Z,1528886493.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:41:33.116Z,1528886493.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:33.492Z,1528886493.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:33.523Z,1528886493.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:41:33.524Z,1528886493.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:33.892Z,1528886493.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:33.916Z,1528886493.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:41:33.917Z,1528886493.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:34.298Z,1528886494.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:34.316Z,1528886494.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:41:34.317Z,1528886494.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:34.701Z,1528886494.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:34.719Z,1528886494.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:41:34.720Z,1528886494.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:35.093Z,1528886495.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:35.111Z,1528886495.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:41:35.112Z,1528886495.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:35.492Z,1528886495.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:35.509Z,1528886495.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:41:35.510Z,1528886495.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:35.892Z,1528886495.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:35.911Z,1528886495.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:41:35.912Z,1528886495.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:36.298Z,1528886496.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:36.316Z,1528886496.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:41:36.317Z,1528886496.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:36.701Z,1528886496.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:36.719Z,1528886496.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:41:36.719Z,1528886496.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:37.101Z,1528886497.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:37.119Z,1528886497.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:41:37.120Z,1528886497.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:37.492Z,1528886497.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:37.510Z,1528886497.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:41:37.511Z,1528886497.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:37.894Z,1528886497.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:37.911Z,1528886497.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:41:37.912Z,1528886497.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:38.305Z,1528886498.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:38.324Z,1528886498.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:41:38.341Z,1528886498.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:41.419Z,1528886501.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:41.448Z,1528886501.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T10:41:41.449Z,1528886501.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:41.585Z,1528886501.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:41.620Z,1528886501.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T10:41:41.621Z,1528886501.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:41.967Z,1528886501.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:41.000Z,1528886502.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T10:41:42.001Z,1528886502.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:42.368Z,1528886502.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:42.397Z,1528886502.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T10:41:42.398Z,1528886502.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:42.764Z,1528886502.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:42.797Z,1528886502.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T10:41:42.798Z,1528886502.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:43.164Z,1528886503.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:43.193Z,1528886503.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T10:41:43.194Z,1528886503.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:43.569Z,1528886503.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:43.603Z,1528886503.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T10:41:43.604Z,1528886503.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:43.981Z,1528886503.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:44.007Z,1528886504.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T10:41:44.008Z,1528886504.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:44.382Z,1528886504.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:44.411Z,1528886504.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T10:41:44.412Z,1528886504.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:44.767Z,1528886504.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:44.785Z,1528886504.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T10:41:44.786Z,1528886504.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:45.166Z,1528886505.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:45.188Z,1528886505.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T10:41:45.189Z,1528886505.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:45.567Z,1528886505.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:45.584Z,1528886505.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T10:41:45.585Z,1528886505.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:45.964Z,1528886505.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:45.982Z,1528886505.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:46.377Z,1528886506.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:46.408Z,1528886506.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:46.777Z,1528886506.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:46.795Z,1528886506.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:47.173Z,1528886507.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:47.191Z,1528886507.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:47.566Z,1528886507.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:47.596Z,1528886507.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:47.970Z,1528886507.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:47.988Z,1528886507.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:48.363Z,1528886508.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:48.396Z,1528886508.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:48.770Z,1528886508.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:48.787Z,1528886508.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:49.168Z,1528886509.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:49.194Z,1528886509.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:49.578Z,1528886509.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:49.596Z,1528886509.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:49.978Z,1528886509.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:50.000Z,1528886510.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:50.379Z,1528886510.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:50.404Z,1528886510.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:50.763Z,1528886510.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:50.786Z,1528886510.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:51.167Z,1528886511.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:51.191Z,1528886511.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:51.568Z,1528886511.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:51.599Z,1528886511.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:51.969Z,1528886511.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:51.987Z,1528886511.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:52.379Z,1528886512.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:52.396Z,1528886512.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:52.783Z,1528886512.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:52.801Z,1528886512.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:53.175Z,1528886513.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:53.194Z,1528886513.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:53.567Z,1528886513.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:53.597Z,1528886513.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:53.963Z,1528886513.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:53.990Z,1528886513.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:54.363Z,1528886514.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:54.390Z,1528886514.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:54.762Z,1528886514.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:54.799Z,1528886514.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:55.163Z,1528886515.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:55.198Z,1528886515.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:55.579Z,1528886515.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:55.597Z,1528886515.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:55.984Z,1528886515.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:56.002Z,1528886516.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:56.384Z,1528886516.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:56.402Z,1528886516.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:56.759Z,1528886516.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:56.795Z,1528886516.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:57.163Z,1528886517.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:57.204Z,1528886517.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:57.564Z,1528886517.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:57.594Z,1528886517.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:57.963Z,1528886517.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:57.991Z,1528886517.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:58.380Z,1528886518.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:58.397Z,1528886518.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:58.784Z,1528886518.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:58.803Z,1528886518.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:59.180Z,1528886519.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:59.198Z,1528886519.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:59.563Z,1528886519.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:41:59.604Z,1528886519.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:41:59.963Z,1528886519.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:00.004Z,1528886520.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:00.367Z,1528886520.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:00.400Z,1528886520.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:00.765Z,1528886520.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:00.805Z,1528886520.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:01.163Z,1528886521.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:01.190Z,1528886521.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:01.589Z,1528886521.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:01.607Z,1528886521.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:01.977Z,1528886521.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:02.012Z,1528886522.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:02.378Z,1528886522.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:02.416Z,1528886522.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:02.763Z,1528886522.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:02.801Z,1528886522.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:03.168Z,1528886523.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:03.186Z,1528886523.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:03.568Z,1528886523.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:03.592Z,1528886523.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:03.967Z,1528886523.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:03.985Z,1528886523.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:04.378Z,1528886524.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:04.418Z,1528886524.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:04.778Z,1528886524.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:04.813Z,1528886524.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:05.174Z,1528886525.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:05.193Z,1528886525.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:05.566Z,1528886525.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:05.610Z,1528886525.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:05.970Z,1528886525.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:05.988Z,1528886525.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:06.368Z,1528886526.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:06.390Z,1528886526.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:06.768Z,1528886526.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:06.786Z,1528886526.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:07.170Z,1528886527.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:07.188Z,1528886527.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:07.570Z,1528886527.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:07.596Z,1528886527.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:07.978Z,1528886527.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:07.995Z,1528886527.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:08.378Z,1528886528.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:08.396Z,1528886528.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:08.769Z,1528886528.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:08.787Z,1528886528.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:09.167Z,1528886529.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:09.189Z,1528886529.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:09.568Z,1528886529.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:09.595Z,1528886529.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:09.969Z,1528886529.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:09.987Z,1528886529.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:10.378Z,1528886530.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:10.400Z,1528886530.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:10.779Z,1528886530.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:10.796Z,1528886530.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:11.175Z,1528886531.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:11.193Z,1528886531.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:11.567Z,1528886531.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:11.590Z,1528886531.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:11.970Z,1528886531.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:12.001Z,1528886532.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:12.364Z,1528886532.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:12.401Z,1528886532.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:12.767Z,1528886532.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:12.789Z,1528886532.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:13.167Z,1528886533.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:13.193Z,1528886533.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:13.575Z,1528886533.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:13.592Z,1528886533.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:13.978Z,1528886533.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:14.000Z,1528886534.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:14.379Z,1528886534.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:14.397Z,1528886534.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:14.763Z,1528886534.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:14.786Z,1528886534.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:15.173Z,1528886535.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:15.191Z,1528886535.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:15.568Z,1528886535.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:15.599Z,1528886535.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:15.959Z,1528886535.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:15.993Z,1528886535.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:16.378Z,1528886536.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:16.405Z,1528886536.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:16.783Z,1528886536.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:16.801Z,1528886536.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:17.179Z,1528886537.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:17.197Z,1528886537.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:17.565Z,1528886537.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:17.590Z,1528886537.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:17.967Z,1528886537.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:18.001Z,1528886538.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:18.380Z,1528886538.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:18.398Z,1528886538.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:18.783Z,1528886538.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:18.801Z,1528886538.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:19.184Z,1528886539.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:19.202Z,1528886539.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:19.560Z,1528886539.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:19.595Z,1528886539.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:19.963Z,1528886539.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:19.992Z,1528886539.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:20.384Z,1528886540.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:20.402Z,1528886540.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:20.783Z,1528886540.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:20.801Z,1528886540.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:21.179Z,1528886541.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:21.198Z,1528886541.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:21.564Z,1528886541.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:21.594Z,1528886541.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:21.960Z,1528886541.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:21.986Z,1528886541.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:22.373Z,1528886542.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:22.408Z,1528886542.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:22.784Z,1528886542.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:22.802Z,1528886542.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:23.174Z,1528886543.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:23.208Z,1528886543.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:23.562Z,1528886543.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:23.596Z,1528886543.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:23.963Z,1528886543.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:23.998Z,1528886543.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:24.373Z,1528886544.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:24.407Z,1528886544.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:24.777Z,1528886544.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:24.804Z,1528886544.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:25.177Z,1528886545.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:25.206Z,1528886545.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:25.563Z,1528886545.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:25.604Z,1528886545.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:25.963Z,1528886545.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:25.998Z,1528886545.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:26.377Z,1528886546.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:26.413Z,1528886546.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:26.777Z,1528886546.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:26.795Z,1528886546.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:27.174Z,1528886547.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:27.191Z,1528886547.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:27.568Z,1528886547.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:27.602Z,1528886547.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:27.969Z,1528886547.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:27.987Z,1528886547.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:28.374Z,1528886548.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:28.392Z,1528886548.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:28.774Z,1528886548.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:28.801Z,1528886548.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:29.178Z,1528886549.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:29.196Z,1528886549.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:29.567Z,1528886549.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:29.591Z,1528886549.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:29.967Z,1528886549.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:29.992Z,1528886549.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:30.375Z,1528886550.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:30.393Z,1528886550.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:30.779Z,1528886550.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:30.796Z,1528886550.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:31.179Z,1528886551.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:31.204Z,1528886551.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:31.563Z,1528886551.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:31.587Z,1528886551.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:31.967Z,1528886551.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:31.989Z,1528886551.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:32.379Z,1528886552.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:32.397Z,1528886552.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:32.778Z,1528886552.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:32.796Z,1528886552.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:33.178Z,1528886553.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:33.196Z,1528886553.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:33.568Z,1528886553.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:33.599Z,1528886553.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:33.969Z,1528886553.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:33.987Z,1528886553.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:34.375Z,1528886554.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:34.393Z,1528886554.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:34.787Z,1528886554.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:34.804Z,1528886554.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:35.179Z,1528886555.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:35.197Z,1528886555.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:35.563Z,1528886555.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:35.599Z,1528886555.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:35.963Z,1528886555.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:35.998Z,1528886555.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:36.388Z,1528886556.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:36.406Z,1528886556.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:36.778Z,1528886556.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:36.800Z,1528886556.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:37.185Z,1528886557.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:37.203Z,1528886557.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:37.560Z,1528886557.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:37.594Z,1528886557.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:37.967Z,1528886557.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:37.000Z,1528886558.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:38.386Z,1528886558.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:38.409Z,1528886558.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:38.784Z,1528886558.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:38.802Z,1528886558.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:39.173Z,1528886559.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:39.217Z,1528886559.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:39.565Z,1528886559.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:39.591Z,1528886559.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:39.964Z,1528886559.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:40.004Z,1528886560.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:40.382Z,1528886560.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:40.411Z,1528886560.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:40.782Z,1528886560.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:40.811Z,1528886560.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:41.196Z,1528886561.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:41.214Z,1528886561.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:44.287Z,1528886564.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:44.314Z,1528886564.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:44.458Z,1528886564.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:44.480Z,1528886564.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:44.859Z,1528886564.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:44.877Z,1528886564.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:45.262Z,1528886565.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:45.279Z,1528886565.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:45.660Z,1528886565.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:45.684Z,1528886565.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:46.047Z,1528886566.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:46.077Z,1528886566.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:46.449Z,1528886566.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:46.475Z,1528886566.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:46.851Z,1528886566.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:46.869Z,1528886566.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:47.250Z,1528886567.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:47.272Z,1528886567.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:47.664Z,1528886567.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:47.704Z,1528886567.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:48.057Z,1528886568.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:48.090Z,1528886568.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:48.464Z,1528886568.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:48.482Z,1528886568.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:48.850Z,1528886568.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:48.879Z,1528886568.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:49.250Z,1528886569.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:49.268Z,1528886569.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:49.640Z,1528886569.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:49.676Z,1528886569.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:50.050Z,1528886570.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:50.080Z,1528886570.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:50.460Z,1528886570.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:50.479Z,1528886570.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:50.862Z,1528886570.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:50.888Z,1528886570.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:51.264Z,1528886571.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:51.284Z,1528886571.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:51.639Z,1528886571.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:51.676Z,1528886571.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:52.048Z,1528886572.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:52.072Z,1528886572.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:52.450Z,1528886572.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:52.468Z,1528886572.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:52.850Z,1528886572.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:52.868Z,1528886572.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:53.250Z,1528886573.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:53.272Z,1528886573.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:53.663Z,1528886573.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:53.681Z,1528886573.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:54.059Z,1528886574.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:54.077Z,1528886574.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:54.459Z,1528886574.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:54.477Z,1528886574.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:54.843Z,1528886574.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:54.874Z,1528886574.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:55.239Z,1528886575.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:55.280Z,1528886575.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:55.644Z,1528886575.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:55.679Z,1528886575.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:56.043Z,1528886576.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:56.072Z,1528886576.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:56.459Z,1528886576.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:56.477Z,1528886576.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:56.863Z,1528886576.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:56.881Z,1528886576.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:57.265Z,1528886577.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:57.283Z,1528886577.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:57.639Z,1528886577.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:57.675Z,1528886577.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:58.043Z,1528886578.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:58.076Z,1528886578.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:58.443Z,1528886578.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:58.480Z,1528886578.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:58.840Z,1528886578.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:58.876Z,1528886578.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:59.243Z,1528886579.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:59.270Z,1528886579.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:42:59.664Z,1528886579.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:42:59.683Z,1528886579.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:00.060Z,1528886580.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:00.078Z,1528886580.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:00.460Z,1528886580.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:00.477Z,1528886580.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:00.839Z,1528886580.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:00.876Z,1528886580.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:01.239Z,1528886581.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:01.271Z,1528886581.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:01.642Z,1528886581.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:01.670Z,1528886581.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:02.043Z,1528886582.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:02.073Z,1528886582.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:02.460Z,1528886582.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:02.478Z,1528886582.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:02.858Z,1528886582.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:02.876Z,1528886582.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:03.264Z,1528886583.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:03.282Z,1528886583.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:03.639Z,1528886583.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:03.676Z,1528886583.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:04.043Z,1528886584.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:04.071Z,1528886584.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:04.443Z,1528886584.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:04.472Z,1528886584.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:04.844Z,1528886584.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:04.876Z,1528886584.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:05.243Z,1528886585.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:05.270Z,1528886585.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:05.664Z,1528886585.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:05.681Z,1528886585.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:06.059Z,1528886586.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:06.077Z,1528886586.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:06.455Z,1528886586.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:06.473Z,1528886586.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:06.844Z,1528886586.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:06.875Z,1528886586.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:07.239Z,1528886587.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:07.275Z,1528886587.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:07.643Z,1528886587.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:07.671Z,1528886587.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:08.043Z,1528886588.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:08.072Z,1528886588.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:08.460Z,1528886588.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:08.484Z,1528886588.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:08.864Z,1528886588.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:08.882Z,1528886588.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:09.264Z,1528886589.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:09.282Z,1528886589.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:09.639Z,1528886589.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:09.675Z,1528886589.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:10.043Z,1528886590.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:10.070Z,1528886590.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:10.443Z,1528886590.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:10.473Z,1528886590.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:10.844Z,1528886590.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:10.871Z,1528886590.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:11.243Z,1528886591.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:11.270Z,1528886591.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:11.665Z,1528886591.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:11.683Z,1528886591.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:12.058Z,1528886592.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:12.076Z,1528886592.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:12.453Z,1528886592.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:12.490Z,1528886592.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:12.843Z,1528886592.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:12.872Z,1528886592.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:13.243Z,1528886593.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:13.271Z,1528886593.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:13.644Z,1528886593.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:13.672Z,1528886593.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:14.043Z,1528886594.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:14.072Z,1528886594.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:14.460Z,1528886594.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:14.478Z,1528886594.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:14.858Z,1528886594.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:14.876Z,1528886594.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:15.264Z,1528886595.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:15.282Z,1528886595.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:15.640Z,1528886595.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:15.673Z,1528886595.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:16.043Z,1528886596.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:16.070Z,1528886596.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:16.465Z,1528886596.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:16.483Z,1528886596.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:16.858Z,1528886596.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:16.876Z,1528886596.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:17.253Z,1528886597.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:17.290Z,1528886597.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:17.644Z,1528886597.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:17.684Z,1528886597.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:18.043Z,1528886598.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:18.070Z,1528886598.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:18.461Z,1528886598.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:18.479Z,1528886598.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:18.860Z,1528886598.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:18.878Z,1528886598.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:19.254Z,1528886599.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:19.277Z,1528886599.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:19.643Z,1528886599.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:19.671Z,1528886599.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:20.043Z,1528886600.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:20.072Z,1528886600.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:20.459Z,1528886600.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:20.484Z,1528886600.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:20.863Z,1528886600.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:20.881Z,1528886600.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:21.265Z,1528886601.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:21.283Z,1528886601.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:21.640Z,1528886601.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:21.679Z,1528886601.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:22.043Z,1528886602.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:22.079Z,1528886602.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:22.464Z,1528886602.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:22.482Z,1528886602.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:22.862Z,1528886602.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:22.880Z,1528886602.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:23.258Z,1528886603.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:23.288Z,1528886603.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:23.644Z,1528886603.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:23.686Z,1528886603.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:24.043Z,1528886604.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:24.077Z,1528886604.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:24.457Z,1528886604.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:24.492Z,1528886604.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:24.857Z,1528886604.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:24.892Z,1528886604.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:25.258Z,1528886605.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:25.286Z,1528886605.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:25.647Z,1528886605.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:25.677Z,1528886605.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:26.048Z,1528886606.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:26.066Z,1528886606.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:26.458Z,1528886606.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:26.492Z,1528886606.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:26.858Z,1528886606.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:26.876Z,1528886606.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:27.259Z,1528886607.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:27.278Z,1528886607.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:27.654Z,1528886607.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:27.672Z,1528886607.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:28.050Z,1528886608.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:28.069Z,1528886608.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:28.458Z,1528886608.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:28.477Z,1528886608.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:28.858Z,1528886608.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:28.900Z,1528886608.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:29.258Z,1528886609.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:29.277Z,1528886609.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:29.650Z,1528886609.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:29.668Z,1528886609.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:30.050Z,1528886610.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:30.067Z,1528886610.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:30.454Z,1528886610.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:30.476Z,1528886610.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:30.861Z,1528886610.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:30.879Z,1528886610.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:31.254Z,1528886611.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:31.276Z,1528886611.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:31.649Z,1528886611.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:31.667Z,1528886611.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:32.047Z,1528886612.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:32.081Z,1528886612.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:32.458Z,1528886612.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:32.476Z,1528886612.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:32.857Z,1528886612.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:32.875Z,1528886612.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:33.259Z,1528886613.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:33.277Z,1528886613.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:33.640Z,1528886613.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:33.675Z,1528886613.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:34.053Z,1528886614.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:34.071Z,1528886614.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:34.463Z,1528886614.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:34.481Z,1528886614.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:34.863Z,1528886614.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:34.888Z,1528886614.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:35.259Z,1528886615.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:35.277Z,1528886615.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:35.654Z,1528886615.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:35.672Z,1528886615.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:36.048Z,1528886616.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:36.067Z,1528886616.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:36.426Z,1528886616.426 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T10:43:36.427Z,1528886616.427 [NAL9602] Data Fault, FailCount= 5
2018-06-13T10:43:36.427Z,1528886616.427 [NAL9602](ERROR): Data Fault
2018-06-13T10:43:36.450Z,1528886616.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:36.484Z,1528886616.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:36.577Z,1528886616.577 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T10:43:36.577Z,1528886616.577 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T10:43:36.826Z,1528886616.826 [NAL9602](INFO): Powering down
2018-06-13T10:43:36.843Z,1528886616.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:36.892Z,1528886616.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:36.975Z,1528886616.975 [CBIT](INFO): Critical error at 20180613T104336
2018-06-13T10:43:37.241Z,1528886617.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:37.268Z,1528886617.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:37.654Z,1528886617.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:37.676Z,1528886617.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:38.052Z,1528886618.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:38.069Z,1528886618.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:38.452Z,1528886618.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:38.470Z,1528886618.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:41.579Z,1528886621.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:41.596Z,1528886621.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:41.730Z,1528886621.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:41.756Z,1528886621.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:42.138Z,1528886622.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:42.171Z,1528886622.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:42.538Z,1528886622.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:42.571Z,1528886622.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:42.931Z,1528886622.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:42.957Z,1528886622.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:43.334Z,1528886623.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:43.352Z,1528886623.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:43.730Z,1528886623.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:43.747Z,1528886623.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:44.130Z,1528886624.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:44.148Z,1528886624.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:44.534Z,1528886624.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:44.556Z,1528886624.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:44.938Z,1528886624.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:44.956Z,1528886624.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:45.333Z,1528886625.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:45.351Z,1528886625.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:45.738Z,1528886625.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:45.755Z,1528886625.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:46.133Z,1528886626.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:46.150Z,1528886626.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:46.533Z,1528886626.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:46.551Z,1528886626.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:46.937Z,1528886626.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:46.955Z,1528886626.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:47.337Z,1528886627.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:47.354Z,1528886627.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:47.738Z,1528886627.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:47.756Z,1528886627.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:48.137Z,1528886628.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:48.155Z,1528886628.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:48.533Z,1528886628.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:48.551Z,1528886628.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:48.937Z,1528886628.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:48.955Z,1528886628.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:49.337Z,1528886629.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:49.355Z,1528886629.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:49.733Z,1528886629.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:49.751Z,1528886629.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:50.137Z,1528886630.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:50.155Z,1528886630.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:50.538Z,1528886630.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:50.555Z,1528886630.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:50.937Z,1528886630.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:50.954Z,1528886630.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:51.337Z,1528886631.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:51.355Z,1528886631.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:51.737Z,1528886631.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:51.755Z,1528886631.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:52.133Z,1528886632.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:52.150Z,1528886632.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:52.537Z,1528886632.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:52.555Z,1528886632.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:52.937Z,1528886632.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:52.960Z,1528886632.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:53.337Z,1528886633.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:53.354Z,1528886633.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:53.737Z,1528886633.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:53.755Z,1528886633.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:54.137Z,1528886634.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:54.155Z,1528886634.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:54.535Z,1528886634.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:54.560Z,1528886634.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:54.937Z,1528886634.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:54.960Z,1528886634.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:55.338Z,1528886635.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:55.355Z,1528886635.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:55.735Z,1528886635.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:55.752Z,1528886635.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:56.137Z,1528886636.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:56.160Z,1528886636.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:56.537Z,1528886636.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:56.555Z,1528886636.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:56.935Z,1528886636.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:56.952Z,1528886636.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:57.338Z,1528886637.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:57.356Z,1528886637.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:57.737Z,1528886637.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:57.755Z,1528886637.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:58.135Z,1528886638.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:58.152Z,1528886638.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:58.537Z,1528886638.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:58.555Z,1528886638.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:58.937Z,1528886638.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:58.955Z,1528886638.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:59.337Z,1528886639.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:59.360Z,1528886639.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:43:59.740Z,1528886639.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:43:59.758Z,1528886639.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:00.140Z,1528886640.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:00.157Z,1528886640.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:00.535Z,1528886640.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:00.560Z,1528886640.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:00.939Z,1528886640.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:00.964Z,1528886640.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:01.341Z,1528886641.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:01.359Z,1528886641.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:01.735Z,1528886641.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:01.760Z,1528886641.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:02.140Z,1528886642.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:02.158Z,1528886642.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:02.540Z,1528886642.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:02.564Z,1528886642.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:02.939Z,1528886642.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:02.956Z,1528886642.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:03.340Z,1528886643.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:03.359Z,1528886643.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:03.738Z,1528886643.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:03.760Z,1528886643.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:04.136Z,1528886644.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:04.153Z,1528886644.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:04.540Z,1528886644.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:04.558Z,1528886644.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:04.940Z,1528886644.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:04.957Z,1528886644.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:05.335Z,1528886645.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:05.360Z,1528886645.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:05.740Z,1528886645.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:05.758Z,1528886645.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:06.141Z,1528886646.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:06.159Z,1528886646.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:06.535Z,1528886646.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:06.560Z,1528886646.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:06.940Z,1528886646.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:06.958Z,1528886646.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:07.332Z,1528886647.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:07.364Z,1528886647.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:07.735Z,1528886647.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:07.760Z,1528886647.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:08.141Z,1528886648.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:08.159Z,1528886648.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:08.540Z,1528886648.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:08.558Z,1528886648.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:08.936Z,1528886648.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:08.960Z,1528886648.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:09.340Z,1528886649.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:09.358Z,1528886649.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:09.741Z,1528886649.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:09.758Z,1528886649.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:10.137Z,1528886650.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:10.160Z,1528886650.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:10.540Z,1528886650.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:10.558Z,1528886650.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:10.942Z,1528886650.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:10.959Z,1528886650.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:11.337Z,1528886651.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:11.355Z,1528886651.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:11.734Z,1528886651.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:11.767Z,1528886651.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:12.139Z,1528886652.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:12.168Z,1528886652.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:12.531Z,1528886652.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:12.560Z,1528886652.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:12.931Z,1528886652.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:12.963Z,1528886652.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:13.339Z,1528886653.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:13.373Z,1528886653.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:13.731Z,1528886653.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:13.760Z,1528886653.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:14.131Z,1528886654.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:14.165Z,1528886654.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:14.535Z,1528886654.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:14.563Z,1528886654.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:14.934Z,1528886654.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:14.965Z,1528886654.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:15.330Z,1528886655.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:15.369Z,1528886655.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:15.735Z,1528886655.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:15.763Z,1528886655.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:16.134Z,1528886656.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:16.163Z,1528886656.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:16.530Z,1528886656.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:16.560Z,1528886656.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:16.934Z,1528886656.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:16.968Z,1528886656.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:17.334Z,1528886657.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:17.367Z,1528886657.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:17.730Z,1528886657.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:17.766Z,1528886657.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:18.134Z,1528886658.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:18.171Z,1528886658.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:18.534Z,1528886658.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:18.574Z,1528886658.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:18.930Z,1528886658.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:18.948Z,1528886658.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:19.334Z,1528886659.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:19.372Z,1528886659.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:19.734Z,1528886659.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:19.751Z,1528886659.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:20.131Z,1528886660.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:20.149Z,1528886660.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:20.541Z,1528886660.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:20.559Z,1528886660.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:20.937Z,1528886660.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:20.954Z,1528886660.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:21.337Z,1528886661.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:21.355Z,1528886661.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:21.738Z,1528886661.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:21.760Z,1528886661.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:22.135Z,1528886662.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:22.160Z,1528886662.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:22.536Z,1528886662.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:22.554Z,1528886662.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:22.938Z,1528886662.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:22.960Z,1528886662.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:23.339Z,1528886663.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:23.356Z,1528886663.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:23.735Z,1528886663.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:23.754Z,1528886663.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:24.138Z,1528886664.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:24.168Z,1528886664.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:24.535Z,1528886664.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:24.556Z,1528886664.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:24.936Z,1528886664.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:24.954Z,1528886664.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:25.340Z,1528886665.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:25.358Z,1528886665.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:25.739Z,1528886665.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:25.757Z,1528886665.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:26.136Z,1528886666.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:26.154Z,1528886666.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:26.540Z,1528886666.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:26.557Z,1528886666.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:26.943Z,1528886666.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:26.960Z,1528886666.960 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:26.960Z,1528886666.960 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 146
2018-06-13T10:44:26.960Z,1528886666.960 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:44:26.962Z,1528886666.962 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:26.962Z,1528886666.962 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 146
2018-06-13T10:44:26.962Z,1528886666.962 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:44:26.964Z,1528886666.964 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:26.964Z,1528886666.964 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 146
2018-06-13T10:44:26.964Z,1528886666.964 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:44:27.045Z,1528886667.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:44:27.045Z,1528886667.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:44:27.046Z,1528886667.046 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:44:27.341Z,1528886667.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:27.429Z,1528886667.429 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:44:27.429Z,1528886667.429 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 146
2018-06-13T10:44:27.430Z,1528886667.430 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:44:27.430Z,1528886667.430 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 146
2018-06-13T10:44:27.430Z,1528886667.430 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:44:27.430Z,1528886667.430 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 146
2018-06-13T10:44:27.738Z,1528886667.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:27.760Z,1528886667.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:44:27.760Z,1528886667.760 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:44:27.761Z,1528886667.761 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:44:27.761Z,1528886667.761 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:44:27.762Z,1528886667.762 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:44:27.762Z,1528886667.762 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:44:27.762Z,1528886667.762 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:44:27.763Z,1528886667.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:44:27.763Z,1528886667.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:44:28.134Z,1528886668.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:28.169Z,1528886668.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:44:28.170Z,1528886668.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:28.532Z,1528886668.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:28.566Z,1528886668.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:44:28.567Z,1528886668.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:28.934Z,1528886668.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:28.960Z,1528886668.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:44:28.962Z,1528886668.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:29.334Z,1528886669.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:29.361Z,1528886669.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:44:29.362Z,1528886669.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:29.730Z,1528886669.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:29.760Z,1528886669.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:44:29.765Z,1528886669.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:30.134Z,1528886670.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:30.166Z,1528886670.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:44:30.167Z,1528886670.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:30.534Z,1528886670.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:30.567Z,1528886670.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:44:30.568Z,1528886670.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:30.929Z,1528886670.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:30.959Z,1528886670.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:44:30.960Z,1528886670.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:31.334Z,1528886671.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:31.373Z,1528886671.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:44:31.374Z,1528886671.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:31.735Z,1528886671.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:31.752Z,1528886671.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:44:31.777Z,1528886671.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:32.131Z,1528886672.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:32.149Z,1528886672.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:44:32.150Z,1528886672.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:32.538Z,1528886672.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:32.556Z,1528886672.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:44:32.573Z,1528886672.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:32.938Z,1528886672.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:32.955Z,1528886672.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:44:32.956Z,1528886672.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:33.338Z,1528886673.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:33.356Z,1528886673.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:44:33.357Z,1528886673.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:33.738Z,1528886673.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:33.755Z,1528886673.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:44:33.756Z,1528886673.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:34.137Z,1528886674.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:34.154Z,1528886674.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:44:34.155Z,1528886674.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:34.535Z,1528886674.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:34.552Z,1528886674.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:44:34.553Z,1528886674.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:34.940Z,1528886674.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:34.958Z,1528886674.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:44:34.959Z,1528886674.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:35.341Z,1528886675.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:35.358Z,1528886675.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:44:35.359Z,1528886675.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:35.736Z,1528886675.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:35.753Z,1528886675.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:44:35.754Z,1528886675.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:36.138Z,1528886676.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:36.161Z,1528886676.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:44:36.162Z,1528886676.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:36.542Z,1528886676.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:36.559Z,1528886676.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:44:36.560Z,1528886676.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:36.939Z,1528886676.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:36.957Z,1528886676.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:44:36.958Z,1528886676.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:37.338Z,1528886677.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:37.359Z,1528886677.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:44:37.360Z,1528886677.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:37.739Z,1528886677.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:37.756Z,1528886677.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:44:37.757Z,1528886677.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:38.140Z,1528886678.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:38.157Z,1528886678.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:44:38.158Z,1528886678.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:38.541Z,1528886678.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:38.558Z,1528886678.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:44:38.559Z,1528886678.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:41.650Z,1528886681.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:41.667Z,1528886681.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T10:44:41.668Z,1528886681.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:41.804Z,1528886681.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:41.821Z,1528886681.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T10:44:41.822Z,1528886681.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:42.211Z,1528886682.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:42.241Z,1528886682.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T10:44:42.242Z,1528886682.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:42.615Z,1528886682.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:42.632Z,1528886682.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T10:44:42.659Z,1528886682.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:43.004Z,1528886683.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:43.022Z,1528886683.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T10:44:43.023Z,1528886683.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:43.411Z,1528886683.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:43.428Z,1528886683.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T10:44:43.429Z,1528886683.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:43.810Z,1528886683.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:43.828Z,1528886683.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T10:44:43.829Z,1528886683.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:44.208Z,1528886684.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:44.225Z,1528886684.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T10:44:44.226Z,1528886684.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:44.611Z,1528886684.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:44.628Z,1528886684.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T10:44:44.630Z,1528886684.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:45.006Z,1528886685.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:45.027Z,1528886685.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T10:44:45.028Z,1528886685.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:45.406Z,1528886685.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:45.423Z,1528886685.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T10:44:45.424Z,1528886685.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:45.811Z,1528886685.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:45.828Z,1528886685.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T10:44:45.830Z,1528886685.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:46.211Z,1528886686.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:46.228Z,1528886686.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T10:44:46.229Z,1528886686.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:46.606Z,1528886686.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:46.623Z,1528886686.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T10:44:46.624Z,1528886686.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:47.012Z,1528886687.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:47.030Z,1528886687.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:47.410Z,1528886687.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:47.428Z,1528886687.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:47.807Z,1528886687.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:47.826Z,1528886687.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:48.211Z,1528886688.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:48.228Z,1528886688.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:48.609Z,1528886688.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:48.626Z,1528886688.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:49.007Z,1528886689.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:49.026Z,1528886689.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:49.410Z,1528886689.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:49.428Z,1528886689.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:49.810Z,1528886689.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:49.827Z,1528886689.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:50.208Z,1528886690.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:50.226Z,1528886690.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:50.610Z,1528886690.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:50.628Z,1528886690.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:51.008Z,1528886691.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:51.025Z,1528886691.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:51.408Z,1528886691.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:51.426Z,1528886691.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:51.811Z,1528886691.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:51.829Z,1528886691.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:52.208Z,1528886692.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:52.232Z,1528886692.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:52.608Z,1528886692.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:52.626Z,1528886692.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:53.010Z,1528886693.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:53.028Z,1528886693.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:53.412Z,1528886693.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:53.429Z,1528886693.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:53.808Z,1528886693.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:53.827Z,1528886693.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:54.213Z,1528886694.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:54.231Z,1528886694.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:54.612Z,1528886694.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:54.630Z,1528886694.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:55.009Z,1528886695.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:55.027Z,1528886695.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:55.410Z,1528886695.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:55.437Z,1528886695.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:55.813Z,1528886695.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:55.831Z,1528886695.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:56.207Z,1528886696.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:56.232Z,1528886696.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:56.614Z,1528886696.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:56.635Z,1528886696.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:57.012Z,1528886697.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:57.030Z,1528886697.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:57.414Z,1528886697.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:57.432Z,1528886697.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:57.814Z,1528886697.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:57.832Z,1528886697.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:58.217Z,1528886698.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:58.235Z,1528886698.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:58.611Z,1528886698.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:58.629Z,1528886698.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:59.014Z,1528886699.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:59.031Z,1528886699.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:59.417Z,1528886699.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:59.435Z,1528886699.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:44:59.812Z,1528886699.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:44:59.830Z,1528886699.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:00.212Z,1528886700.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:00.238Z,1528886700.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:00.613Z,1528886700.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:00.632Z,1528886700.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:01.010Z,1528886701.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:01.028Z,1528886701.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:01.419Z,1528886701.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:01.437Z,1528886701.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:01.809Z,1528886701.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:01.832Z,1528886701.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:02.209Z,1528886702.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:02.228Z,1528886702.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:02.603Z,1528886702.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:02.640Z,1528886702.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:03.011Z,1528886703.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:03.030Z,1528886703.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:03.403Z,1528886703.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:03.432Z,1528886703.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:03.813Z,1528886703.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:03.832Z,1528886703.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:04.213Z,1528886704.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:04.231Z,1528886704.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:04.603Z,1528886704.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:04.633Z,1528886704.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:05.007Z,1528886705.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:05.046Z,1528886705.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:05.403Z,1528886705.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:05.440Z,1528886705.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:05.803Z,1528886705.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:05.836Z,1528886705.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:06.208Z,1528886706.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:06.248Z,1528886706.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:06.603Z,1528886706.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:06.620Z,1528886706.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:07.003Z,1528886707.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:07.021Z,1528886707.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:07.407Z,1528886707.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:07.425Z,1528886707.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:07.811Z,1528886707.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:07.828Z,1528886707.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:08.207Z,1528886708.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:08.225Z,1528886708.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:08.610Z,1528886708.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:08.628Z,1528886708.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:09.010Z,1528886709.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:09.027Z,1528886709.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:09.408Z,1528886709.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:09.426Z,1528886709.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:09.810Z,1528886709.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:09.828Z,1528886709.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:10.209Z,1528886710.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:10.229Z,1528886710.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:10.606Z,1528886710.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:10.623Z,1528886710.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:11.010Z,1528886711.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:11.032Z,1528886711.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:11.409Z,1528886711.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:11.426Z,1528886711.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:11.808Z,1528886711.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:11.826Z,1528886711.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:12.210Z,1528886712.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:12.228Z,1528886712.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:12.608Z,1528886712.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:12.626Z,1528886712.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:13.009Z,1528886713.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:13.027Z,1528886713.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:13.414Z,1528886713.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:13.432Z,1528886713.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:13.810Z,1528886713.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:13.827Z,1528886713.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:14.208Z,1528886714.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:14.226Z,1528886714.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:14.610Z,1528886714.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:14.628Z,1528886714.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:15.010Z,1528886715.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:15.028Z,1528886715.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:15.409Z,1528886715.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:15.427Z,1528886715.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:15.809Z,1528886715.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:15.827Z,1528886715.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:16.209Z,1528886716.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:16.232Z,1528886716.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:16.609Z,1528886716.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:16.627Z,1528886716.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:17.010Z,1528886717.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:17.029Z,1528886717.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:17.408Z,1528886717.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:17.425Z,1528886717.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:17.808Z,1528886717.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:17.826Z,1528886717.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:18.211Z,1528886718.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:18.229Z,1528886718.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:18.613Z,1528886718.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:18.631Z,1528886718.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:19.007Z,1528886719.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:19.025Z,1528886719.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:19.410Z,1528886719.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:19.428Z,1528886719.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:19.815Z,1528886719.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:19.832Z,1528886719.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:20.209Z,1528886720.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:20.227Z,1528886720.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:20.610Z,1528886720.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:20.632Z,1528886720.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:21.010Z,1528886721.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:21.027Z,1528886721.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:21.412Z,1528886721.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:21.430Z,1528886721.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:21.814Z,1528886721.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:21.832Z,1528886721.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:22.213Z,1528886722.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:22.230Z,1528886722.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:22.609Z,1528886722.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:22.627Z,1528886722.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:23.013Z,1528886723.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:23.043Z,1528886723.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:23.413Z,1528886723.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:23.431Z,1528886723.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:23.809Z,1528886723.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:23.827Z,1528886723.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:24.214Z,1528886724.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:24.231Z,1528886724.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:24.617Z,1528886724.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:24.635Z,1528886724.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:25.013Z,1528886725.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:25.031Z,1528886725.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:25.417Z,1528886725.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:25.435Z,1528886725.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:25.813Z,1528886725.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:25.831Z,1528886725.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:26.211Z,1528886726.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:26.229Z,1528886726.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:26.616Z,1528886726.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:26.634Z,1528886726.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:27.013Z,1528886727.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:27.031Z,1528886727.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:27.413Z,1528886727.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:27.431Z,1528886727.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:27.812Z,1528886727.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:27.843Z,1528886727.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:28.216Z,1528886728.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:28.235Z,1528886728.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:28.612Z,1528886728.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:28.630Z,1528886728.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:29.011Z,1528886729.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:29.041Z,1528886729.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:29.418Z,1528886729.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:29.436Z,1528886729.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:29.806Z,1528886729.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:29.840Z,1528886729.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:30.211Z,1528886730.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:30.238Z,1528886730.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:30.607Z,1528886730.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:30.640Z,1528886730.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:31.004Z,1528886731.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:31.042Z,1528886731.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:31.415Z,1528886731.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:31.442Z,1528886731.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:31.811Z,1528886731.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:31.844Z,1528886731.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:32.213Z,1528886732.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:32.242Z,1528886732.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:32.610Z,1528886732.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:32.643Z,1528886732.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:33.010Z,1528886733.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:33.044Z,1528886733.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:33.411Z,1528886733.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:33.444Z,1528886733.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:33.811Z,1528886733.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:33.843Z,1528886733.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:34.210Z,1528886734.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:34.242Z,1528886734.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:34.610Z,1528886734.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:34.643Z,1528886734.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:35.010Z,1528886735.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:35.043Z,1528886735.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:35.407Z,1528886735.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:35.445Z,1528886735.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:35.806Z,1528886735.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:35.852Z,1528886735.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:36.212Z,1528886736.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:36.246Z,1528886736.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:36.610Z,1528886736.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:36.628Z,1528886736.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:36.721Z,1528886736.721 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T10:45:36.721Z,1528886736.721 [NAL9602] No Fault, FailCount= 5
2018-06-13T10:45:36.995Z,1528886736.995 [NAL9602](INFO): Powering up NAL9602
2018-06-13T10:45:37.013Z,1528886737.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:37.031Z,1528886737.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:37.414Z,1528886737.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:37.435Z,1528886737.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:37.814Z,1528886737.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:37.832Z,1528886737.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:37.835Z,1528886737.835 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T10:45:37.835Z,1528886737.835 [Default:CheckIn:C.Wait] Stopped
2018-06-13T10:45:37.835Z,1528886737.835 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T10:45:37.835Z,1528886737.835 [Default:CheckIn:D] Running Loop=1
2018-06-13T10:45:38.219Z,1528886738.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:38.238Z,1528886738.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:38.253Z,1528886738.253 [Default:CheckIn:D] Stopped
2018-06-13T10:45:38.253Z,1528886738.253 [Default:CheckIn:E] Running Loop=1
2018-06-13T10:45:38.616Z,1528886738.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:38.634Z,1528886738.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:38.637Z,1528886738.637 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 438.413249 min 
2018-06-13T10:45:38.637Z,1528886738.637 [Default:CheckIn:E] Stopped
2018-06-13T10:45:38.638Z,1528886738.638 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T10:45:38.638Z,1528886738.638 [Default:CheckIn] Stopped
2018-06-13T10:45:38.638Z,1528886738.638 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T10:45:38.638Z,1528886738.638 [Default:CheckIn](INFO): Running loop #43
2018-06-13T10:45:38.638Z,1528886738.638 [Default:CheckIn] Running Loop=43
2018-06-13T10:45:38.638Z,1528886738.638 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T10:45:38.638Z,1528886738.638 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T10:45:41.728Z,1528886741.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:41.746Z,1528886741.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:41.848Z,1528886741.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:41.878Z,1528886741.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:42.251Z,1528886742.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:42.286Z,1528886742.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:42.652Z,1528886742.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:42.686Z,1528886742.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:43.051Z,1528886743.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:43.069Z,1528886743.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:43.456Z,1528886743.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:43.514Z,1528886743.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:43.859Z,1528886743.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:43.877Z,1528886743.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:44.258Z,1528886744.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:44.276Z,1528886744.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:44.658Z,1528886744.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:44.675Z,1528886744.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:45.057Z,1528886745.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:45.076Z,1528886745.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:45.456Z,1528886745.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:45.475Z,1528886745.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:45.856Z,1528886745.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:45.876Z,1528886745.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:46.256Z,1528886746.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:46.275Z,1528886746.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:46.652Z,1528886746.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:46.671Z,1528886746.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:47.059Z,1528886747.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:47.078Z,1528886747.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:47.461Z,1528886747.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:47.484Z,1528886747.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:47.834Z,1528886747.834 [NAL9602](INFO): NAL9602 initialized
2018-06-13T10:45:47.859Z,1528886747.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:47.882Z,1528886747.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:48.256Z,1528886748.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:48.274Z,1528886748.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:48.669Z,1528886748.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:48.711Z,1528886748.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:49.066Z,1528886749.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:49.084Z,1528886749.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:49.461Z,1528886749.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:49.479Z,1528886749.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:49.858Z,1528886749.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:49.875Z,1528886749.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:50.252Z,1528886750.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:50.278Z,1528886750.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:50.669Z,1528886750.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:50.707Z,1528886750.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:51.065Z,1528886751.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:51.083Z,1528886751.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:51.462Z,1528886751.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:51.479Z,1528886751.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:51.862Z,1528886751.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:51.880Z,1528886751.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:52.258Z,1528886752.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:52.275Z,1528886752.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:52.662Z,1528886752.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:52.679Z,1528886752.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:53.065Z,1528886753.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:53.083Z,1528886753.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:53.463Z,1528886753.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:53.488Z,1528886753.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:53.859Z,1528886753.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:53.884Z,1528886753.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:54.258Z,1528886754.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:54.276Z,1528886754.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:54.661Z,1528886754.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:54.679Z,1528886754.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:55.063Z,1528886755.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:55.088Z,1528886755.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:55.469Z,1528886755.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:55.487Z,1528886755.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:55.862Z,1528886755.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:55.880Z,1528886755.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:56.251Z,1528886756.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:56.287Z,1528886756.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:56.667Z,1528886756.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:56.684Z,1528886756.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:57.063Z,1528886757.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:57.088Z,1528886757.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:57.461Z,1528886757.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:57.479Z,1528886757.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:57.855Z,1528886757.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:57.887Z,1528886757.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:58.263Z,1528886758.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:58.280Z,1528886758.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:58.666Z,1528886758.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:58.688Z,1528886758.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:59.069Z,1528886759.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:59.087Z,1528886759.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:59.465Z,1528886759.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:59.488Z,1528886759.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:45:59.858Z,1528886759.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:45:59.888Z,1528886759.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:00.259Z,1528886760.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:00.277Z,1528886760.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:00.668Z,1528886760.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:00.686Z,1528886760.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:01.069Z,1528886761.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:01.087Z,1528886761.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:01.471Z,1528886761.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:01.488Z,1528886761.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:01.862Z,1528886761.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:01.879Z,1528886761.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:02.262Z,1528886762.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:02.280Z,1528886762.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:02.666Z,1528886762.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:02.685Z,1528886762.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:03.070Z,1528886763.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:03.092Z,1528886763.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:03.470Z,1528886763.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:03.487Z,1528886763.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:03.861Z,1528886763.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:03.879Z,1528886763.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:04.262Z,1528886764.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:04.279Z,1528886764.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:04.670Z,1528886764.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:04.687Z,1528886764.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:05.070Z,1528886765.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:05.088Z,1528886765.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:05.467Z,1528886765.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:05.492Z,1528886765.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:05.862Z,1528886765.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:05.880Z,1528886765.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:06.256Z,1528886766.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:06.283Z,1528886766.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:06.672Z,1528886766.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:06.715Z,1528886766.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:07.067Z,1528886767.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:07.085Z,1528886767.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:07.466Z,1528886767.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:07.485Z,1528886767.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:07.855Z,1528886767.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:07.894Z,1528886767.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:08.260Z,1528886768.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:08.285Z,1528886768.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:08.659Z,1528886768.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:08.684Z,1528886768.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:09.071Z,1528886769.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:09.089Z,1528886769.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:09.473Z,1528886769.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:09.517Z,1528886769.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:09.870Z,1528886769.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:09.888Z,1528886769.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:10.260Z,1528886770.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:10.292Z,1528886770.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:10.661Z,1528886770.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:10.679Z,1528886770.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:11.058Z,1528886771.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:11.096Z,1528886771.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:11.460Z,1528886771.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:11.489Z,1528886771.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:11.870Z,1528886771.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:11.888Z,1528886771.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:12.271Z,1528886772.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:12.289Z,1528886772.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:12.674Z,1528886772.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:12.692Z,1528886772.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:13.060Z,1528886773.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:13.080Z,1528886773.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:13.461Z,1528886773.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:13.478Z,1528886773.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:13.861Z,1528886773.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:13.879Z,1528886773.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:14.258Z,1528886774.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:14.292Z,1528886774.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:14.657Z,1528886774.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:14.680Z,1528886774.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:15.073Z,1528886775.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:15.106Z,1528886775.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:15.471Z,1528886775.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:15.496Z,1528886775.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:15.868Z,1528886775.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:15.911Z,1528886775.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:16.258Z,1528886776.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:16.305Z,1528886776.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:16.662Z,1528886776.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:16.680Z,1528886776.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:17.060Z,1528886777.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:17.079Z,1528886777.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:17.455Z,1528886777.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:17.490Z,1528886777.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:17.873Z,1528886777.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:17.891Z,1528886777.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:18.275Z,1528886778.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:18.293Z,1528886778.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:18.665Z,1528886778.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:18.706Z,1528886778.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:19.057Z,1528886779.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:19.093Z,1528886779.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:19.447Z,1528886779.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:19.479Z,1528886779.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:19.859Z,1528886779.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:19.895Z,1528886779.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:20.254Z,1528886780.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:20.281Z,1528886780.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:20.658Z,1528886780.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:20.696Z,1528886780.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:21.075Z,1528886781.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:21.094Z,1528886781.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:21.474Z,1528886781.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:21.492Z,1528886781.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:21.868Z,1528886781.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:21.899Z,1528886781.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:22.252Z,1528886782.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:22.296Z,1528886782.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:22.647Z,1528886782.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:22.682Z,1528886782.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:23.052Z,1528886783.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:23.086Z,1528886783.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:23.462Z,1528886783.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:23.495Z,1528886783.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:23.864Z,1528886783.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:23.900Z,1528886783.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:24.271Z,1528886784.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:24.293Z,1528886784.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:24.676Z,1528886784.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:24.700Z,1528886784.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:25.047Z,1528886785.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:25.088Z,1528886785.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:25.451Z,1528886785.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:25.499Z,1528886785.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:25.851Z,1528886785.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:25.905Z,1528886785.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:26.252Z,1528886786.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:26.290Z,1528886786.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:26.651Z,1528886786.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:26.685Z,1528886786.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:27.071Z,1528886787.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:27.111Z,1528886787.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:27.468Z,1528886787.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:27.492Z,1528886787.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:27.867Z,1528886787.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:27.890Z,1528886787.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:28.251Z,1528886788.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:28.288Z,1528886788.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:28.647Z,1528886788.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:28.694Z,1528886788.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:29.052Z,1528886789.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:29.084Z,1528886789.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:29.455Z,1528886789.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:29.500Z,1528886789.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:29.857Z,1528886789.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:29.890Z,1528886789.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:30.265Z,1528886790.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:30.305Z,1528886790.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:30.665Z,1528886790.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:30.708Z,1528886790.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:31.047Z,1528886791.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:31.065Z,1528886791.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:31.452Z,1528886791.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:31.490Z,1528886791.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:31.855Z,1528886791.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:31.874Z,1528886791.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:32.255Z,1528886792.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:32.280Z,1528886792.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:32.654Z,1528886792.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:32.672Z,1528886792.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:33.065Z,1528886793.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:33.104Z,1528886793.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:33.462Z,1528886793.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:33.509Z,1528886793.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:33.865Z,1528886793.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:33.883Z,1528886793.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:34.258Z,1528886794.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:34.295Z,1528886794.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:34.657Z,1528886794.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:34.680Z,1528886794.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:35.055Z,1528886795.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:35.089Z,1528886795.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:35.455Z,1528886795.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:35.481Z,1528886795.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:35.868Z,1528886795.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:35.891Z,1528886795.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:36.270Z,1528886796.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:36.293Z,1528886796.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:36.671Z,1528886796.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:36.719Z,1528886796.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:37.057Z,1528886797.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:37.080Z,1528886797.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:37.455Z,1528886797.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:37.485Z,1528886797.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:37.851Z,1528886797.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:37.887Z,1528886797.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:38.252Z,1528886798.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:38.288Z,1528886798.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:38.655Z,1528886798.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:38.690Z,1528886798.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:41.781Z,1528886801.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:41.800Z,1528886801.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:41.937Z,1528886801.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:41.955Z,1528886801.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:42.341Z,1528886802.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:42.359Z,1528886802.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:42.730Z,1528886802.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:42.748Z,1528886802.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:43.125Z,1528886803.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:43.150Z,1528886803.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:43.531Z,1528886803.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:43.550Z,1528886803.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:43.941Z,1528886803.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:43.959Z,1528886803.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:44.337Z,1528886804.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:44.355Z,1528886804.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:44.738Z,1528886804.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:44.756Z,1528886804.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:45.133Z,1528886805.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:45.151Z,1528886805.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:45.530Z,1528886805.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:45.548Z,1528886805.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:45.932Z,1528886805.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:45.950Z,1528886805.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:46.331Z,1528886806.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:46.368Z,1528886806.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:46.739Z,1528886806.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:46.756Z,1528886806.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:47.141Z,1528886807.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:47.159Z,1528886807.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:47.541Z,1528886807.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:47.559Z,1528886807.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:47.931Z,1528886807.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:47.963Z,1528886807.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:48.331Z,1528886808.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:48.350Z,1528886808.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:48.741Z,1528886808.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:48.764Z,1528886808.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:49.141Z,1528886809.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:49.159Z,1528886809.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:49.541Z,1528886809.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:49.559Z,1528886809.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:49.930Z,1528886809.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:49.964Z,1528886809.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:50.332Z,1528886810.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:50.351Z,1528886810.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:50.741Z,1528886810.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:50.759Z,1528886810.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:51.141Z,1528886811.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:51.159Z,1528886811.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:51.542Z,1528886811.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:51.560Z,1528886811.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:51.932Z,1528886811.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:51.950Z,1528886811.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:52.334Z,1528886812.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:52.352Z,1528886812.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:52.741Z,1528886812.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:52.759Z,1528886812.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:53.143Z,1528886813.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:53.161Z,1528886813.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:53.539Z,1528886813.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:53.557Z,1528886813.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:53.934Z,1528886813.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:53.952Z,1528886813.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:54.327Z,1528886814.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:54.354Z,1528886814.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:54.742Z,1528886814.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:54.760Z,1528886814.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:55.140Z,1528886815.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:55.159Z,1528886815.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:55.538Z,1528886815.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:55.560Z,1528886815.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:55.928Z,1528886815.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:55.966Z,1528886815.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:56.330Z,1528886816.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:56.355Z,1528886816.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:56.731Z,1528886816.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:56.749Z,1528886816.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:57.143Z,1528886817.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:57.161Z,1528886817.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:57.541Z,1528886817.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:57.561Z,1528886817.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:57.943Z,1528886817.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:57.961Z,1528886817.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:58.331Z,1528886818.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:58.356Z,1528886818.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:58.728Z,1528886818.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:58.752Z,1528886818.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:59.127Z,1528886819.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:59.171Z,1528886819.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:59.531Z,1528886819.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:59.568Z,1528886819.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:46:59.940Z,1528886819.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:46:59.958Z,1528886819.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:00.342Z,1528886820.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:00.359Z,1528886820.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:00.746Z,1528886820.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:00.765Z,1528886820.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:01.129Z,1528886821.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:01.151Z,1528886821.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:01.528Z,1528886821.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:01.555Z,1528886821.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:01.932Z,1528886821.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:01.963Z,1528886821.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:02.323Z,1528886822.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:02.368Z,1528886822.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:02.724Z,1528886822.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:02.756Z,1528886822.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:03.143Z,1528886823.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:03.178Z,1528886823.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:03.544Z,1528886823.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:03.562Z,1528886823.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:03.939Z,1528886823.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:03.976Z,1528886823.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:04.323Z,1528886824.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:04.376Z,1528886824.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:04.723Z,1528886824.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:04.757Z,1528886824.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:05.126Z,1528886825.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:05.161Z,1528886825.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:05.527Z,1528886825.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:05.576Z,1528886825.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:05.947Z,1528886825.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:05.990Z,1528886825.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:06.352Z,1528886826.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:06.376Z,1528886826.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:06.743Z,1528886826.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:06.780Z,1528886826.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:07.120Z,1528886827.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:07.167Z,1528886827.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:07.525Z,1528886827.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:07.561Z,1528886827.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:07.924Z,1528886827.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:07.970Z,1528886827.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:08.325Z,1528886828.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:08.366Z,1528886828.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:08.727Z,1528886828.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:08.772Z,1528886828.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:09.138Z,1528886829.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:09.180Z,1528886829.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:09.543Z,1528886829.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:09.570Z,1528886829.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:09.940Z,1528886829.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:09.974Z,1528886829.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:10.327Z,1528886830.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:10.379Z,1528886830.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:10.726Z,1528886830.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:10.743Z,1528886830.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:11.127Z,1528886831.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:11.150Z,1528886831.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:11.527Z,1528886831.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:11.550Z,1528886831.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:11.938Z,1528886831.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:11.991Z,1528886831.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:12.341Z,1528886832.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:12.379Z,1528886832.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:12.738Z,1528886832.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:12.782Z,1528886832.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:13.128Z,1528886833.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:13.151Z,1528886833.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:13.528Z,1528886833.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:13.582Z,1528886833.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:13.929Z,1528886833.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:13.947Z,1528886833.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:14.327Z,1528886834.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:14.350Z,1528886834.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:14.728Z,1528886834.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:14.751Z,1528886834.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:15.137Z,1528886835.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:15.155Z,1528886835.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:15.537Z,1528886835.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:15.559Z,1528886835.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:15.938Z,1528886835.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:15.961Z,1528886835.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:16.330Z,1528886836.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:16.354Z,1528886836.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:16.722Z,1528886836.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:16.755Z,1528886836.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:17.134Z,1528886837.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:17.152Z,1528886837.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:17.527Z,1528886837.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:17.557Z,1528886837.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:17.940Z,1528886837.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:17.960Z,1528886837.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:18.338Z,1528886838.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:18.387Z,1528886838.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:18.739Z,1528886838.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:18.757Z,1528886838.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:19.123Z,1528886839.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:19.148Z,1528886839.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:19.527Z,1528886839.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:19.554Z,1528886839.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:19.930Z,1528886839.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:19.961Z,1528886839.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:20.330Z,1528886840.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:20.352Z,1528886840.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:20.727Z,1528886840.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:20.750Z,1528886840.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:21.139Z,1528886841.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:21.162Z,1528886841.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:21.538Z,1528886841.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:21.590Z,1528886841.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:21.941Z,1528886841.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:21.959Z,1528886841.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:22.330Z,1528886842.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:22.348Z,1528886842.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:22.723Z,1528886842.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:22.750Z,1528886842.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:23.127Z,1528886843.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:23.149Z,1528886843.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:23.527Z,1528886843.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:23.552Z,1528886843.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:23.936Z,1528886843.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:23.954Z,1528886843.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:24.338Z,1528886844.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:24.367Z,1528886844.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:24.739Z,1528886844.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:24.764Z,1528886844.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:25.119Z,1528886845.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:25.155Z,1528886845.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:25.529Z,1528886845.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:25.547Z,1528886845.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:25.930Z,1528886845.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:25.950Z,1528886845.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:26.329Z,1528886846.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:26.347Z,1528886846.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:26.733Z,1528886846.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:26.756Z,1528886846.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:27.143Z,1528886847.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:27.172Z,1528886847.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:27.539Z,1528886847.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:27.563Z,1528886847.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:27.939Z,1528886847.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:27.957Z,1528886847.957 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:27.957Z,1528886847.957 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 147
2018-06-13T10:47:27.957Z,1528886847.957 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:47:27.959Z,1528886847.959 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:27.959Z,1528886847.959 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 147
2018-06-13T10:47:27.959Z,1528886847.959 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:47:27.962Z,1528886847.962 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:27.962Z,1528886847.962 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 147
2018-06-13T10:47:27.962Z,1528886847.962 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:47:28.041Z,1528886848.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:47:28.041Z,1528886848.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:47:28.042Z,1528886848.042 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:47:28.323Z,1528886848.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:28.437Z,1528886848.437 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:47:28.437Z,1528886848.437 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 147
2018-06-13T10:47:28.438Z,1528886848.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:47:28.438Z,1528886848.438 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 147
2018-06-13T10:47:28.438Z,1528886848.438 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:47:28.438Z,1528886848.438 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 147
2018-06-13T10:47:28.720Z,1528886848.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:28.755Z,1528886848.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:47:28.755Z,1528886848.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:47:28.756Z,1528886848.756 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:47:28.756Z,1528886848.756 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:47:28.756Z,1528886848.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:47:28.757Z,1528886848.757 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:47:28.757Z,1528886848.757 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:47:28.758Z,1528886848.758 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:47:28.758Z,1528886848.758 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:47:29.119Z,1528886849.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:29.164Z,1528886849.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:47:29.165Z,1528886849.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:29.523Z,1528886849.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:29.553Z,1528886849.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:47:29.554Z,1528886849.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:29.933Z,1528886849.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:29.960Z,1528886849.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:47:29.961Z,1528886849.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:30.337Z,1528886850.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:30.371Z,1528886850.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:47:30.373Z,1528886850.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:30.738Z,1528886850.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:30.779Z,1528886850.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:47:30.780Z,1528886850.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:31.123Z,1528886851.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:31.140Z,1528886851.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:47:31.142Z,1528886851.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:31.527Z,1528886851.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:31.544Z,1528886851.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:47:31.545Z,1528886851.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:31.926Z,1528886851.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:31.944Z,1528886851.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:47:31.945Z,1528886851.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:32.327Z,1528886852.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:32.344Z,1528886852.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:47:32.345Z,1528886852.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:32.728Z,1528886852.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:32.746Z,1528886852.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:47:32.747Z,1528886852.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:33.137Z,1528886853.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:33.155Z,1528886853.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:47:33.156Z,1528886853.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:33.534Z,1528886853.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:33.556Z,1528886853.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:47:33.557Z,1528886853.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:33.934Z,1528886853.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:33.951Z,1528886853.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:47:33.952Z,1528886853.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:34.330Z,1528886854.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:34.347Z,1528886854.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:47:34.348Z,1528886854.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:34.726Z,1528886854.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:34.743Z,1528886854.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:47:34.744Z,1528886854.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:35.130Z,1528886855.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:35.147Z,1528886855.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:47:35.148Z,1528886855.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:35.527Z,1528886855.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:35.554Z,1528886855.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:47:35.555Z,1528886855.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:35.940Z,1528886855.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:35.957Z,1528886855.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:47:35.958Z,1528886855.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:36.344Z,1528886856.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:36.361Z,1528886856.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:47:36.362Z,1528886856.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:36.744Z,1528886856.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:36.762Z,1528886856.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:47:36.763Z,1528886856.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:37.123Z,1528886857.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:37.150Z,1528886857.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:47:37.151Z,1528886857.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:37.523Z,1528886857.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:37.557Z,1528886857.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:47:37.558Z,1528886857.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:37.923Z,1528886857.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:37.953Z,1528886857.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:47:37.954Z,1528886857.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:38.327Z,1528886858.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:38.359Z,1528886858.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:47:38.360Z,1528886858.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:38.727Z,1528886858.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:38.759Z,1528886858.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:47:38.760Z,1528886858.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:39.148Z,1528886859.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:39.166Z,1528886859.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:47:39.166Z,1528886859.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:39.546Z,1528886859.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:39.564Z,1528886859.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:47:39.565Z,1528886859.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:39.947Z,1528886859.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:39.964Z,1528886859.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:47:39.966Z,1528886859.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:43.039Z,1528886863.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:43.067Z,1528886863.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-06-13T10:47:43.068Z,1528886863.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:43.179Z,1528886863.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:43.220Z,1528886863.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T10:47:43.221Z,1528886863.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:43.602Z,1528886863.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:43.636Z,1528886863.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T10:47:43.637Z,1528886863.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:44.010Z,1528886864.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:44.030Z,1528886864.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T10:47:44.031Z,1528886864.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:44.389Z,1528886864.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:44.425Z,1528886864.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T10:47:44.426Z,1528886864.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:44.783Z,1528886864.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:44.820Z,1528886864.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T10:47:44.821Z,1528886864.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:45.187Z,1528886865.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:45.225Z,1528886865.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T10:47:45.226Z,1528886865.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:45.579Z,1528886865.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:45.621Z,1528886865.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T10:47:45.622Z,1528886865.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:46.001Z,1528886866.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:46.022Z,1528886866.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T10:47:46.023Z,1528886866.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:46.403Z,1528886866.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:46.433Z,1528886866.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T10:47:46.434Z,1528886866.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:46.796Z,1528886866.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:46.822Z,1528886866.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T10:47:46.823Z,1528886866.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:47.183Z,1528886867.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:47.224Z,1528886867.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T10:47:47.225Z,1528886867.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:47.583Z,1528886867.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:47.617Z,1528886867.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T10:47:47.618Z,1528886867.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:47.983Z,1528886867.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:48.023Z,1528886868.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:48.387Z,1528886868.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:48.424Z,1528886868.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:48.783Z,1528886868.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:48.829Z,1528886868.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:49.189Z,1528886869.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:49.224Z,1528886869.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:49.599Z,1528886869.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:49.629Z,1528886869.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:49.000Z,1528886870.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:50.029Z,1528886870.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:50.383Z,1528886870.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:50.432Z,1528886870.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:50.787Z,1528886870.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:50.804Z,1528886870.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:51.184Z,1528886871.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:51.208Z,1528886871.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:51.582Z,1528886871.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:51.604Z,1528886871.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:52.001Z,1528886872.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:52.043Z,1528886872.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:52.397Z,1528886872.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:52.439Z,1528886872.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:52.795Z,1528886872.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:52.818Z,1528886872.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:53.192Z,1528886873.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:53.219Z,1528886873.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:53.593Z,1528886873.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:53.641Z,1528886873.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:53.990Z,1528886873.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:54.008Z,1528886874.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:54.388Z,1528886874.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:54.419Z,1528886874.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:54.786Z,1528886874.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:54.810Z,1528886874.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:55.195Z,1528886875.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:55.214Z,1528886875.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:55.598Z,1528886875.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:55.620Z,1528886875.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:56.002Z,1528886876.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:56.037Z,1528886876.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:56.391Z,1528886876.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:56.428Z,1528886876.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:56.789Z,1528886876.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:56.825Z,1528886876.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:57.190Z,1528886877.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:57.208Z,1528886877.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:57.583Z,1528886877.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:57.607Z,1528886877.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:57.998Z,1528886877.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:58.021Z,1528886878.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:58.398Z,1528886878.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:58.428Z,1528886878.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:58.795Z,1528886878.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:58.814Z,1528886878.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:59.187Z,1528886879.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:59.220Z,1528886879.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:59.579Z,1528886879.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:47:59.613Z,1528886879.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:47:59.983Z,1528886879.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:00.011Z,1528886880.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:00.383Z,1528886880.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:00.416Z,1528886880.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:00.779Z,1528886880.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:00.823Z,1528886880.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:01.189Z,1528886881.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:01.224Z,1528886881.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:01.602Z,1528886881.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:01.619Z,1528886881.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:02.000Z,1528886882.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:02.019Z,1528886882.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:02.379Z,1528886882.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:02.423Z,1528886882.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:02.784Z,1528886882.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:02.823Z,1528886882.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:03.179Z,1528886883.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:03.197Z,1528886883.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:03.579Z,1528886883.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:03.597Z,1528886883.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:03.993Z,1528886883.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:04.030Z,1528886884.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:04.393Z,1528886884.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:04.429Z,1528886884.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:04.794Z,1528886884.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:04.826Z,1528886884.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:05.185Z,1528886885.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:05.203Z,1528886885.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:05.587Z,1528886885.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:05.604Z,1528886885.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:05.982Z,1528886885.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:05.000Z,1528886886.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:06.386Z,1528886886.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:06.404Z,1528886886.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:06.786Z,1528886886.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:06.804Z,1528886886.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:07.197Z,1528886887.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:07.237Z,1528886887.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:07.601Z,1528886887.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:07.642Z,1528886887.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:07.997Z,1528886887.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:08.015Z,1528886888.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:08.384Z,1528886888.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:08.402Z,1528886888.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:08.786Z,1528886888.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:08.804Z,1528886888.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:09.186Z,1528886889.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:09.203Z,1528886889.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:09.588Z,1528886889.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:09.606Z,1528886889.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:09.993Z,1528886889.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:10.011Z,1528886890.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:10.393Z,1528886890.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:10.416Z,1528886890.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:10.794Z,1528886890.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:10.811Z,1528886890.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:11.188Z,1528886891.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:11.205Z,1528886891.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:11.588Z,1528886891.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:11.606Z,1528886891.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:11.989Z,1528886891.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:12.007Z,1528886892.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:12.387Z,1528886892.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:12.419Z,1528886892.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:12.789Z,1528886892.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:12.807Z,1528886892.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:13.194Z,1528886893.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:13.220Z,1528886893.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:13.597Z,1528886893.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:13.616Z,1528886893.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:13.997Z,1528886893.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:14.020Z,1528886894.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:14.390Z,1528886894.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:14.408Z,1528886894.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:14.789Z,1528886894.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:14.806Z,1528886894.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:15.189Z,1528886895.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:15.212Z,1528886895.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:15.589Z,1528886895.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:15.606Z,1528886895.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:15.998Z,1528886895.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:16.020Z,1528886896.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:16.399Z,1528886896.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:16.424Z,1528886896.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:16.798Z,1528886896.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:16.816Z,1528886896.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:17.187Z,1528886897.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:17.210Z,1528886897.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:17.590Z,1528886897.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:17.607Z,1528886897.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:17.982Z,1528886897.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:18.014Z,1528886898.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:18.387Z,1528886898.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:18.410Z,1528886898.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:18.789Z,1528886898.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:18.812Z,1528886898.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:19.199Z,1528886899.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:19.217Z,1528886899.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:19.598Z,1528886899.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:19.620Z,1528886899.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:19.999Z,1528886899.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:20.024Z,1528886900.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:20.389Z,1528886900.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:20.407Z,1528886900.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:20.787Z,1528886900.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:20.809Z,1528886900.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:21.191Z,1528886901.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:21.209Z,1528886901.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:21.587Z,1528886901.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:21.610Z,1528886901.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:21.999Z,1528886901.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:22.017Z,1528886902.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:22.398Z,1528886902.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:22.420Z,1528886902.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:22.798Z,1528886902.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:22.820Z,1528886902.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:23.187Z,1528886903.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:23.216Z,1528886903.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:23.587Z,1528886903.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:23.611Z,1528886903.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:23.990Z,1528886903.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:24.012Z,1528886904.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:24.387Z,1528886904.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:24.421Z,1528886904.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:24.783Z,1528886904.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:24.811Z,1528886904.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:25.199Z,1528886905.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:25.217Z,1528886905.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:25.603Z,1528886905.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:25.621Z,1528886905.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:26.002Z,1528886906.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:26.026Z,1528886906.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:26.384Z,1528886906.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:26.418Z,1528886906.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:26.783Z,1528886906.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:26.819Z,1528886906.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:27.184Z,1528886907.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:27.221Z,1528886907.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:27.583Z,1528886907.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:27.615Z,1528886907.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:27.000Z,1528886908.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:28.018Z,1528886908.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:28.404Z,1528886908.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:28.428Z,1528886908.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:28.804Z,1528886908.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:28.822Z,1528886908.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:29.183Z,1528886909.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:29.220Z,1528886909.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:29.583Z,1528886909.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:29.620Z,1528886909.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:29.983Z,1528886909.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:30.020Z,1528886910.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:30.384Z,1528886910.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:30.415Z,1528886910.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:30.788Z,1528886910.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:30.824Z,1528886910.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:31.189Z,1528886911.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:31.223Z,1528886911.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:31.602Z,1528886911.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:31.620Z,1528886911.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:32.000Z,1528886912.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:32.034Z,1528886912.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:32.383Z,1528886912.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:32.420Z,1528886912.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:32.783Z,1528886912.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:32.820Z,1528886912.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:33.188Z,1528886913.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:33.224Z,1528886913.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:33.580Z,1528886913.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:33.614Z,1528886913.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:33.994Z,1528886913.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:34.022Z,1528886914.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:34.393Z,1528886914.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:34.430Z,1528886914.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:34.790Z,1528886914.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:34.819Z,1528886914.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:35.183Z,1528886915.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:35.221Z,1528886915.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:35.583Z,1528886915.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:35.611Z,1528886915.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:35.979Z,1528886915.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:36.004Z,1528886916.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:36.388Z,1528886916.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:36.406Z,1528886916.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:36.786Z,1528886916.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:36.805Z,1528886916.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:37.194Z,1528886917.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:37.212Z,1528886917.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:37.597Z,1528886917.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:37.616Z,1528886917.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:37.998Z,1528886917.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:38.016Z,1528886918.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:38.392Z,1528886918.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:38.410Z,1528886918.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:38.791Z,1528886918.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:38.816Z,1528886918.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:41.904Z,1528886921.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:41.922Z,1528886921.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:42.055Z,1528886922.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:42.110Z,1528886922.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:42.484Z,1528886922.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:42.503Z,1528886922.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:42.879Z,1528886922.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:42.908Z,1528886922.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:43.270Z,1528886923.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:43.313Z,1528886923.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:43.664Z,1528886923.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:43.701Z,1528886923.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:44.063Z,1528886924.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:44.103Z,1528886924.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:44.464Z,1528886924.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:44.508Z,1528886924.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:44.859Z,1528886924.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:44.876Z,1528886924.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:45.277Z,1528886925.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:45.316Z,1528886925.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:45.670Z,1528886925.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:45.716Z,1528886925.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:46.074Z,1528886926.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:46.105Z,1528886926.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:46.463Z,1528886926.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:46.517Z,1528886926.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:46.856Z,1528886926.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:46.874Z,1528886926.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:47.264Z,1528886927.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:47.282Z,1528886927.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:47.662Z,1528886927.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:47.685Z,1528886927.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:48.069Z,1528886928.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:48.087Z,1528886928.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:48.481Z,1528886928.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:48.516Z,1528886928.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:48.877Z,1528886928.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:48.900Z,1528886928.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:49.258Z,1528886929.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:49.288Z,1528886929.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:49.669Z,1528886929.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:49.686Z,1528886929.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:50.059Z,1528886930.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:50.096Z,1528886930.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:50.469Z,1528886930.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:50.487Z,1528886930.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:50.869Z,1528886930.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:50.892Z,1528886930.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:51.284Z,1528886931.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:51.302Z,1528886931.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:51.679Z,1528886931.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:51.697Z,1528886931.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:52.079Z,1528886932.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:52.102Z,1528886932.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:52.470Z,1528886932.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:52.494Z,1528886932.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:52.859Z,1528886932.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:52.896Z,1528886932.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:53.260Z,1528886933.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:53.295Z,1528886933.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:53.659Z,1528886933.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:53.687Z,1528886933.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:54.075Z,1528886934.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:54.098Z,1528886934.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:54.483Z,1528886934.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:54.501Z,1528886934.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:54.884Z,1528886934.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:54.902Z,1528886934.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:55.260Z,1528886935.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:55.292Z,1528886935.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:55.659Z,1528886935.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:55.686Z,1528886935.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:56.063Z,1528886936.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:56.092Z,1528886936.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:56.459Z,1528886936.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:56.495Z,1528886936.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:56.863Z,1528886936.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:56.896Z,1528886936.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:57.281Z,1528886937.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:57.304Z,1528886937.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:57.674Z,1528886937.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:57.692Z,1528886937.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:58.078Z,1528886938.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:58.107Z,1528886938.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:58.459Z,1528886938.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:58.498Z,1528886938.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:58.859Z,1528886938.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:58.891Z,1528886938.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:59.260Z,1528886939.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:59.300Z,1528886939.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:48:59.663Z,1528886939.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:48:59.700Z,1528886939.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:00.077Z,1528886940.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:00.095Z,1528886940.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:00.483Z,1528886940.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:00.507Z,1528886940.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:00.884Z,1528886940.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:00.902Z,1528886940.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:01.259Z,1528886941.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:01.295Z,1528886941.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:01.663Z,1528886941.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:01.690Z,1528886941.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:02.063Z,1528886942.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:02.093Z,1528886942.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:02.460Z,1528886942.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:02.496Z,1528886942.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:02.863Z,1528886942.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:02.890Z,1528886942.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:03.283Z,1528886943.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:03.301Z,1528886943.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:03.678Z,1528886943.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:03.696Z,1528886943.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:04.079Z,1528886944.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:04.098Z,1528886944.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:04.463Z,1528886944.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:04.492Z,1528886944.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:04.859Z,1528886944.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:04.898Z,1528886944.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:05.264Z,1528886945.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:05.298Z,1528886945.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:05.659Z,1528886945.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:05.677Z,1528886945.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:06.069Z,1528886946.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:06.103Z,1528886946.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:06.473Z,1528886946.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:06.507Z,1528886946.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:06.878Z,1528886946.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:06.915Z,1528886946.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:07.264Z,1528886947.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:07.282Z,1528886947.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:07.666Z,1528886947.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:07.684Z,1528886947.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:08.069Z,1528886948.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:08.087Z,1528886948.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:08.464Z,1528886948.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:08.482Z,1528886948.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:08.868Z,1528886948.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:08.887Z,1528886948.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:09.277Z,1528886949.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:09.296Z,1528886949.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:09.674Z,1528886949.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:09.692Z,1528886949.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:10.074Z,1528886950.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:10.096Z,1528886950.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:10.470Z,1528886950.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:10.488Z,1528886950.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:10.865Z,1528886950.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:10.883Z,1528886950.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:11.270Z,1528886951.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:11.287Z,1528886951.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:11.664Z,1528886951.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:11.698Z,1528886951.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:12.075Z,1528886952.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:12.100Z,1528886952.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:12.478Z,1528886952.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:12.500Z,1528886952.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:12.879Z,1528886952.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:12.896Z,1528886952.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:13.259Z,1528886953.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:13.295Z,1528886953.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:13.669Z,1528886953.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:13.692Z,1528886953.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:14.070Z,1528886954.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:14.088Z,1528886954.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:14.470Z,1528886954.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:14.488Z,1528886954.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:14.859Z,1528886954.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:14.897Z,1528886954.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:15.284Z,1528886955.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:15.303Z,1528886955.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:15.678Z,1528886955.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:15.697Z,1528886955.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:16.069Z,1528886956.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:16.103Z,1528886956.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:16.464Z,1528886956.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:16.496Z,1528886956.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:16.863Z,1528886956.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:16.896Z,1528886956.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:17.264Z,1528886957.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:17.299Z,1528886957.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:17.660Z,1528886957.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:17.696Z,1528886957.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:18.073Z,1528886958.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:18.102Z,1528886958.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:18.484Z,1528886958.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:18.502Z,1528886958.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:18.873Z,1528886958.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:18.908Z,1528886958.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:19.264Z,1528886959.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:19.282Z,1528886959.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:19.663Z,1528886959.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:19.681Z,1528886959.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:20.063Z,1528886960.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:20.088Z,1528886960.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:20.463Z,1528886960.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:20.482Z,1528886960.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:20.865Z,1528886960.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:20.884Z,1528886960.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:21.273Z,1528886961.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:21.292Z,1528886961.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:21.674Z,1528886961.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:21.716Z,1528886961.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:22.074Z,1528886962.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:22.093Z,1528886962.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:22.462Z,1528886962.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:22.484Z,1528886962.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:22.864Z,1528886962.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:22.883Z,1528886962.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:23.271Z,1528886963.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:23.289Z,1528886963.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:23.670Z,1528886963.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:23.692Z,1528886963.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:24.073Z,1528886964.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:24.092Z,1528886964.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:24.477Z,1528886964.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:24.496Z,1528886964.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:24.877Z,1528886964.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:24.896Z,1528886964.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:25.265Z,1528886965.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:25.288Z,1528886965.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:25.668Z,1528886965.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:25.686Z,1528886965.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:26.070Z,1528886966.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:26.088Z,1528886966.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:26.466Z,1528886966.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:26.483Z,1528886966.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:26.863Z,1528886966.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:26.886Z,1528886966.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:27.277Z,1528886967.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:27.296Z,1528886967.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:27.678Z,1528886967.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:27.696Z,1528886967.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:28.078Z,1528886968.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:28.096Z,1528886968.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:28.466Z,1528886968.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:28.488Z,1528886968.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:28.865Z,1528886968.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:28.888Z,1528886968.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:29.270Z,1528886969.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:29.288Z,1528886969.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:29.670Z,1528886969.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:29.692Z,1528886969.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:30.076Z,1528886970.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:30.094Z,1528886970.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:30.478Z,1528886970.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:30.500Z,1528886970.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:30.879Z,1528886970.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:30.897Z,1528886970.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:31.265Z,1528886971.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:31.283Z,1528886971.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:31.669Z,1528886971.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:31.686Z,1528886971.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:32.070Z,1528886972.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:32.088Z,1528886972.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:32.466Z,1528886972.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:32.483Z,1528886972.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:32.863Z,1528886972.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:32.889Z,1528886972.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:33.283Z,1528886973.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:33.301Z,1528886973.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:33.679Z,1528886973.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:33.697Z,1528886973.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:34.079Z,1528886974.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:34.097Z,1528886974.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:34.459Z,1528886974.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:34.493Z,1528886974.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:34.859Z,1528886974.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:34.895Z,1528886974.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:35.270Z,1528886975.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:35.287Z,1528886975.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:35.670Z,1528886975.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:35.688Z,1528886975.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:36.071Z,1528886976.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:36.089Z,1528886976.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:36.479Z,1528886976.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:36.497Z,1528886976.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:36.878Z,1528886976.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:36.900Z,1528886976.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:37.255Z,1528886977.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:37.296Z,1528886977.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:37.670Z,1528886977.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:37.688Z,1528886977.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:38.070Z,1528886978.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:38.088Z,1528886978.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:38.470Z,1528886978.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:38.487Z,1528886978.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:38.869Z,1528886978.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:38.887Z,1528886978.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:42.001Z,1528886982.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:42.028Z,1528886982.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:42.157Z,1528886982.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:42.198Z,1528886982.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:42.561Z,1528886982.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:42.606Z,1528886982.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:42.952Z,1528886982.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:42.988Z,1528886982.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:43.351Z,1528886983.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:43.368Z,1528886983.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:43.750Z,1528886983.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:43.773Z,1528886983.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:44.161Z,1528886984.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:44.202Z,1528886984.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:44.561Z,1528886984.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:44.607Z,1528886984.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:44.961Z,1528886984.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:45.005Z,1528886985.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:45.353Z,1528886985.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:45.377Z,1528886985.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:45.750Z,1528886985.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:45.768Z,1528886985.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:46.152Z,1528886986.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:46.176Z,1528886986.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:46.553Z,1528886986.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:46.571Z,1528886986.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:46.947Z,1528886986.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:46.974Z,1528886986.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:47.357Z,1528886987.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:47.375Z,1528886987.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:47.762Z,1528886987.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:47.784Z,1528886987.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:48.158Z,1528886988.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:48.176Z,1528886988.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:48.551Z,1528886988.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:48.593Z,1528886988.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:48.954Z,1528886988.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:48.972Z,1528886988.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:49.344Z,1528886989.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:49.375Z,1528886989.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:49.751Z,1528886989.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:49.787Z,1528886989.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:50.167Z,1528886990.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:50.190Z,1528886990.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:50.570Z,1528886990.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:50.592Z,1528886990.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:50.963Z,1528886990.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:50.981Z,1528886990.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:51.347Z,1528886991.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:51.382Z,1528886991.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:51.743Z,1528886991.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:51.777Z,1528886991.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:52.147Z,1528886992.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:52.181Z,1528886992.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:52.549Z,1528886992.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:52.567Z,1528886992.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:52.951Z,1528886992.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:52.969Z,1528886992.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:53.361Z,1528886993.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:53.396Z,1528886993.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:53.761Z,1528886993.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:53.779Z,1528886993.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:54.158Z,1528886994.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:54.176Z,1528886994.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:54.551Z,1528886994.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:54.578Z,1528886994.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:54.954Z,1528886994.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:54.976Z,1528886994.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:55.353Z,1528886995.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:55.374Z,1528886995.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:55.753Z,1528886995.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:55.771Z,1528886995.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:56.167Z,1528886996.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:56.185Z,1528886996.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:56.563Z,1528886996.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:56.583Z,1528886996.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:56.963Z,1528886996.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:56.980Z,1528886996.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:57.355Z,1528886997.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:57.373Z,1528886997.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:57.743Z,1528886997.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:57.779Z,1528886997.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:58.147Z,1528886998.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:58.181Z,1528886998.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:58.548Z,1528886998.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:58.579Z,1528886998.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:58.947Z,1528886998.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:58.985Z,1528886998.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:59.358Z,1528886999.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:59.386Z,1528886999.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:49:59.788Z,1528886999.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:49:59.834Z,1528886999.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:00.157Z,1528887000.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:00.200Z,1528887000.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:00.547Z,1528887000.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:00.580Z,1528887000.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:00.947Z,1528887000.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:00.980Z,1528887000.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:01.348Z,1528887001.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:01.371Z,1528887001.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:01.747Z,1528887001.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:01.780Z,1528887001.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:02.158Z,1528887002.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:02.176Z,1528887002.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:02.558Z,1528887002.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:02.584Z,1528887002.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:02.958Z,1528887002.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:02.976Z,1528887002.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:03.347Z,1528887003.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:03.391Z,1528887003.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:03.743Z,1528887003.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:03.776Z,1528887003.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:04.148Z,1528887004.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:04.194Z,1528887004.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:04.544Z,1528887004.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:04.578Z,1528887004.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:04.948Z,1528887004.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:04.987Z,1528887004.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:05.362Z,1528887005.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:05.391Z,1528887005.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:05.761Z,1528887005.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:05.790Z,1528887005.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:06.155Z,1528887006.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:06.188Z,1528887006.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:06.548Z,1528887006.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:06.574Z,1528887006.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:06.947Z,1528887006.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:06.966Z,1528887006.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:07.348Z,1528887007.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:07.372Z,1528887007.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:07.751Z,1528887007.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:07.769Z,1528887007.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:08.162Z,1528887008.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:08.198Z,1528887008.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:08.557Z,1528887008.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:08.576Z,1528887008.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:08.970Z,1528887008.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:09.003Z,1528887009.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:09.353Z,1528887009.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:09.370Z,1528887009.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:09.747Z,1528887009.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:09.779Z,1528887009.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:10.152Z,1528887010.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:10.170Z,1528887010.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:10.554Z,1528887010.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:10.572Z,1528887010.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:10.948Z,1528887010.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:10.980Z,1528887010.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:11.358Z,1528887011.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:11.377Z,1528887011.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:11.759Z,1528887011.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:11.777Z,1528887011.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:12.159Z,1528887012.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:12.177Z,1528887012.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:12.550Z,1528887012.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:12.581Z,1528887012.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:12.950Z,1528887012.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:12.968Z,1528887012.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:13.347Z,1528887013.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:13.371Z,1528887013.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:13.751Z,1528887013.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:13.781Z,1528887013.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:14.162Z,1528887014.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:14.180Z,1528887014.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:14.562Z,1528887014.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:14.579Z,1528887014.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:14.962Z,1528887014.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:14.980Z,1528887014.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:15.354Z,1528887015.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:15.371Z,1528887015.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:15.747Z,1528887015.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:15.780Z,1528887015.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:16.151Z,1528887016.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:16.174Z,1528887016.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:16.554Z,1528887016.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:16.572Z,1528887016.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:16.947Z,1528887016.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:16.978Z,1528887016.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:17.362Z,1528887017.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:17.380Z,1528887017.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:17.763Z,1528887017.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:17.781Z,1528887017.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:18.162Z,1528887018.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:18.180Z,1528887018.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:18.551Z,1528887018.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:18.574Z,1528887018.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:18.954Z,1528887018.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:18.971Z,1528887018.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:19.347Z,1528887019.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:19.379Z,1528887019.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:19.753Z,1528887019.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:19.771Z,1528887019.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:20.162Z,1528887020.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:20.180Z,1528887020.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:20.562Z,1528887020.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:20.580Z,1528887020.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:20.962Z,1528887020.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:20.979Z,1528887020.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:21.350Z,1528887021.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:21.367Z,1528887021.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:21.746Z,1528887021.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:21.778Z,1528887021.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:22.151Z,1528887022.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:22.180Z,1528887022.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:22.544Z,1528887022.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:22.571Z,1528887022.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:22.943Z,1528887022.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:22.981Z,1528887022.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:23.363Z,1528887023.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:23.381Z,1528887023.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:23.763Z,1528887023.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:23.781Z,1528887023.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:24.163Z,1528887024.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:24.181Z,1528887024.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:24.547Z,1528887024.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:24.574Z,1528887024.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:24.947Z,1528887024.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:24.975Z,1528887024.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:25.349Z,1528887025.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:25.383Z,1528887025.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:25.747Z,1528887025.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:25.776Z,1528887025.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:26.164Z,1528887026.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:26.181Z,1528887026.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:26.563Z,1528887026.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:26.581Z,1528887026.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:26.963Z,1528887026.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:26.981Z,1528887026.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:27.343Z,1528887027.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:27.387Z,1528887027.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:27.747Z,1528887027.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:27.774Z,1528887027.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:28.147Z,1528887028.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:28.174Z,1528887028.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:28.548Z,1528887028.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:28.576Z,1528887028.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:28.947Z,1528887028.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:28.974Z,1528887028.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:28.974Z,1528887028.974 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 148
2018-06-13T10:50:28.974Z,1528887028.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:50:28.976Z,1528887028.976 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:28.976Z,1528887028.976 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 148
2018-06-13T10:50:28.976Z,1528887028.976 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:50:28.978Z,1528887028.978 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:28.978Z,1528887028.978 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 148
2018-06-13T10:50:28.978Z,1528887028.978 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:50:29.049Z,1528887029.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:50:29.049Z,1528887029.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:50:29.050Z,1528887029.050 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:50:29.361Z,1528887029.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:29.464Z,1528887029.464 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:50:29.465Z,1528887029.465 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 148
2018-06-13T10:50:29.465Z,1528887029.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:50:29.465Z,1528887029.465 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 148
2018-06-13T10:50:29.466Z,1528887029.466 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:50:29.466Z,1528887029.466 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 148
2018-06-13T10:50:29.767Z,1528887029.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:29.791Z,1528887029.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:50:29.791Z,1528887029.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:50:29.791Z,1528887029.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:50:29.792Z,1528887029.792 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:50:29.792Z,1528887029.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:50:29.792Z,1528887029.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:50:29.793Z,1528887029.793 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:50:29.793Z,1528887029.793 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:50:29.794Z,1528887029.794 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:50:30.172Z,1528887030.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:30.189Z,1528887030.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:50:30.190Z,1528887030.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:30.547Z,1528887030.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:30.588Z,1528887030.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:50:30.589Z,1528887030.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:30.947Z,1528887030.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:30.985Z,1528887030.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:50:30.986Z,1528887030.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:31.348Z,1528887031.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:31.365Z,1528887031.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:50:31.366Z,1528887031.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:31.751Z,1528887031.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:31.768Z,1528887031.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:50:31.769Z,1528887031.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:32.158Z,1528887032.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:32.175Z,1528887032.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:50:32.176Z,1528887032.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:32.561Z,1528887032.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:32.579Z,1528887032.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:50:32.580Z,1528887032.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:32.958Z,1528887032.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:32.975Z,1528887032.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:50:32.976Z,1528887032.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:33.354Z,1528887033.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:33.371Z,1528887033.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:50:33.372Z,1528887033.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:33.751Z,1528887033.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:33.768Z,1528887033.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:50:33.769Z,1528887033.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:34.152Z,1528887034.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:34.170Z,1528887034.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:50:34.171Z,1528887034.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:34.550Z,1528887034.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:34.613Z,1528887034.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:50:34.614Z,1528887034.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:34.952Z,1528887034.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:34.970Z,1528887034.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:50:34.971Z,1528887034.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:35.358Z,1528887035.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:35.375Z,1528887035.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:50:35.376Z,1528887035.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:35.761Z,1528887035.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:35.779Z,1528887035.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:50:35.780Z,1528887035.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:36.158Z,1528887036.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:36.176Z,1528887036.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:50:36.177Z,1528887036.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:36.551Z,1528887036.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:36.582Z,1528887036.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:50:36.583Z,1528887036.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:36.952Z,1528887036.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:36.980Z,1528887036.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:50:36.981Z,1528887036.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:37.354Z,1528887037.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:37.371Z,1528887037.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:50:37.372Z,1528887037.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:37.753Z,1528887037.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:37.770Z,1528887037.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:50:37.771Z,1528887037.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:38.161Z,1528887038.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:38.179Z,1528887038.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:50:38.180Z,1528887038.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:38.565Z,1528887038.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:38.583Z,1528887038.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:50:38.584Z,1528887038.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:38.962Z,1528887038.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:38.980Z,1528887038.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:50:38.981Z,1528887038.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:38.984Z,1528887038.984 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T10:45:38.6Z
2018-06-13T10:50:38.984Z,1528887038.984 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T10:50:38.984Z,1528887038.984 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T10:50:42.061Z,1528887042.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:42.079Z,1528887042.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-06-13T10:50:42.080Z,1528887042.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:43.101Z,1528887043.101 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0172.lzma
2018-06-13T10:50:43.121Z,1528887043.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:43.166Z,1528887043.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T10:50:43.167Z,1528887043.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:43.309Z,1528887043.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:43.344Z,1528887043.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:50:43.345Z,1528887043.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:43.666Z,1528887043.666 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0172.lzma.bak
2018-06-13T10:50:43.666Z,1528887043.666 [DataOverHttps](INFO): SBD MOMSN=8329086
2018-06-13T10:50:43.725Z,1528887043.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:43.744Z,1528887043.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:50:43.745Z,1528887043.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:45.581Z,1528887045.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:45.615Z,1528887045.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T10:50:45.616Z,1528887045.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:45.735Z,1528887045.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:45.776Z,1528887045.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:50:45.777Z,1528887045.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:46.139Z,1528887046.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:46.177Z,1528887046.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:50:46.178Z,1528887046.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:49.273Z,1528887049.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:49.292Z,1528887049.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:49.424Z,1528887049.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:49.473Z,1528887049.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:49.829Z,1528887049.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:49.848Z,1528887049.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:50.229Z,1528887050.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:50.247Z,1528887050.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:50.629Z,1528887050.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:50.647Z,1528887050.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:51.024Z,1528887051.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:51.042Z,1528887051.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:54.130Z,1528887054.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:54.148Z,1528887054.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:54.264Z,1528887054.264 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0173.lzma
2018-06-13T10:50:54.294Z,1528887054.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:54.335Z,1528887054.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:54.697Z,1528887054.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:54.731Z,1528887054.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:55.058Z,1528887055.058 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0173.lzma.bak
2018-06-13T10:50:55.058Z,1528887055.058 [DataOverHttps](INFO): SBD MOMSN=8329089
2018-06-13T10:50:55.108Z,1528887055.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:55.152Z,1528887055.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:57.005Z,1528887057.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:57.040Z,1528887057.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:57.043Z,1528887057.043 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T10:50:57.043Z,1528887057.043 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T10:50:57.043Z,1528887057.043 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T10:50:57.147Z,1528887057.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:57.176Z,1528887057.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:50:57.555Z,1528887057.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:50:57.587Z,1528887057.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:00.663Z,1528887060.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:00.696Z,1528887060.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:00.799Z,1528887060.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:00.829Z,1528887060.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:01.231Z,1528887061.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:01.258Z,1528887061.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:01.624Z,1528887061.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:01.643Z,1528887061.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:02.013Z,1528887062.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:02.047Z,1528887062.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:02.404Z,1528887062.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:02.430Z,1528887062.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:02.803Z,1528887062.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:02.834Z,1528887062.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:03.203Z,1528887063.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:03.221Z,1528887063.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:03.604Z,1528887063.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:03.634Z,1528887063.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:04.006Z,1528887064.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:04.024Z,1528887064.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:04.413Z,1528887064.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:04.432Z,1528887064.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:04.821Z,1528887064.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:04.855Z,1528887064.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:05.213Z,1528887065.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:05.231Z,1528887065.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:05.608Z,1528887065.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:05.626Z,1528887065.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:06.009Z,1528887066.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:06.027Z,1528887066.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:06.412Z,1528887066.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:06.430Z,1528887066.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:06.803Z,1528887066.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:06.837Z,1528887066.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:07.219Z,1528887067.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:07.237Z,1528887067.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:07.617Z,1528887067.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:07.635Z,1528887067.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:08.015Z,1528887068.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:08.033Z,1528887068.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:08.413Z,1528887068.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:08.431Z,1528887068.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:08.806Z,1528887068.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:08.832Z,1528887068.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:09.199Z,1528887069.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:09.228Z,1528887069.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:09.604Z,1528887069.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:09.633Z,1528887069.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:10.004Z,1528887070.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:10.042Z,1528887070.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:10.414Z,1528887070.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:10.438Z,1528887070.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:10.825Z,1528887070.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:10.843Z,1528887070.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:11.223Z,1528887071.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:11.248Z,1528887071.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:11.599Z,1528887071.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:11.634Z,1528887071.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:12.003Z,1528887072.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:12.044Z,1528887072.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:12.399Z,1528887072.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:12.433Z,1528887072.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:12.799Z,1528887072.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:12.818Z,1528887072.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:13.218Z,1528887073.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:13.246Z,1528887073.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:13.617Z,1528887073.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:13.647Z,1528887073.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:14.014Z,1528887074.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:14.049Z,1528887074.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:14.403Z,1528887074.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:14.444Z,1528887074.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:14.807Z,1528887074.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:14.825Z,1528887074.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:15.206Z,1528887075.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:15.224Z,1528887075.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:15.606Z,1528887075.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:15.632Z,1528887075.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:16.005Z,1528887076.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:16.023Z,1528887076.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:16.414Z,1528887076.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:16.432Z,1528887076.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:16.817Z,1528887076.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:16.859Z,1528887076.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:17.213Z,1528887077.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:17.232Z,1528887077.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:17.608Z,1528887077.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:17.626Z,1528887077.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:18.008Z,1528887078.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:18.025Z,1528887078.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:18.409Z,1528887078.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:18.427Z,1528887078.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:18.809Z,1528887078.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:18.827Z,1528887078.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:19.213Z,1528887079.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:19.231Z,1528887079.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:19.613Z,1528887079.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:19.636Z,1528887079.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:20.010Z,1528887080.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:20.032Z,1528887080.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:20.408Z,1528887080.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:20.425Z,1528887080.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:20.805Z,1528887080.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:20.828Z,1528887080.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:21.203Z,1528887081.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:21.225Z,1528887081.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:21.609Z,1528887081.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:21.626Z,1528887081.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:22.008Z,1528887082.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:22.026Z,1528887082.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:22.414Z,1528887082.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:22.432Z,1528887082.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:22.817Z,1528887082.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:22.835Z,1528887082.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:23.213Z,1528887083.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:23.236Z,1528887083.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:23.609Z,1528887083.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:23.627Z,1528887083.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:24.008Z,1528887084.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:24.025Z,1528887084.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:24.406Z,1528887084.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:24.428Z,1528887084.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:24.807Z,1528887084.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:24.824Z,1528887084.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:25.216Z,1528887085.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:25.306Z,1528887085.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:25.618Z,1528887085.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:25.635Z,1528887085.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:26.014Z,1528887086.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:26.031Z,1528887086.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:26.528Z,1528887086.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:26.610Z,1528887086.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:26.803Z,1528887086.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:26.895Z,1528887086.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:27.218Z,1528887087.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:27.266Z,1528887087.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:27.622Z,1528887087.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:27.781Z,1528887087.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:28.009Z,1528887088.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:28.027Z,1528887088.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:28.409Z,1528887088.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:28.487Z,1528887088.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:28.803Z,1528887088.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:28.833Z,1528887088.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:29.213Z,1528887089.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:29.247Z,1528887089.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:29.617Z,1528887089.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:29.644Z,1528887089.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:30.017Z,1528887090.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:30.046Z,1528887090.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:30.404Z,1528887090.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:30.422Z,1528887090.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:30.807Z,1528887090.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:30.824Z,1528887090.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:31.291Z,1528887091.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:31.365Z,1528887091.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:31.613Z,1528887091.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:31.647Z,1528887091.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:32.017Z,1528887092.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:32.055Z,1528887092.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:32.406Z,1528887092.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:32.433Z,1528887092.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:32.803Z,1528887092.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:32.825Z,1528887092.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:33.218Z,1528887093.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:33.235Z,1528887093.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:33.617Z,1528887093.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:33.635Z,1528887093.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:34.014Z,1528887094.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:34.031Z,1528887094.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:34.408Z,1528887094.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:34.426Z,1528887094.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:34.808Z,1528887094.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:34.827Z,1528887094.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:35.214Z,1528887095.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:35.263Z,1528887095.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:35.617Z,1528887095.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:35.635Z,1528887095.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:36.017Z,1528887096.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:36.036Z,1528887096.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:36.408Z,1528887096.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:36.427Z,1528887096.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:36.808Z,1528887096.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:36.832Z,1528887096.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:37.217Z,1528887097.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:37.260Z,1528887097.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:37.617Z,1528887097.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:37.635Z,1528887097.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:38.014Z,1528887098.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:38.032Z,1528887098.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:38.411Z,1528887098.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:38.429Z,1528887098.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:38.809Z,1528887098.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:38.827Z,1528887098.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:39.214Z,1528887099.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:39.236Z,1528887099.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:39.617Z,1528887099.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:39.636Z,1528887099.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:40.015Z,1528887100.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:40.033Z,1528887100.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:40.409Z,1528887100.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:40.427Z,1528887100.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:40.803Z,1528887100.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:40.835Z,1528887100.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:41.219Z,1528887101.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:41.291Z,1528887101.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:41.623Z,1528887101.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:41.671Z,1528887101.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:42.025Z,1528887102.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:42.043Z,1528887102.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:42.399Z,1528887102.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:42.435Z,1528887102.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:42.813Z,1528887102.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:42.834Z,1528887102.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:43.227Z,1528887103.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:43.252Z,1528887103.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:43.618Z,1528887103.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:43.640Z,1528887103.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:44.019Z,1528887104.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:44.038Z,1528887104.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:44.413Z,1528887104.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:44.436Z,1528887104.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:44.815Z,1528887104.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:44.833Z,1528887104.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:45.220Z,1528887105.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:45.238Z,1528887105.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:45.624Z,1528887105.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:45.642Z,1528887105.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:46.024Z,1528887106.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:46.042Z,1528887106.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:46.412Z,1528887106.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:46.430Z,1528887106.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:46.815Z,1528887106.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:46.834Z,1528887106.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:47.224Z,1528887107.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:47.248Z,1528887107.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:47.624Z,1528887107.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:47.642Z,1528887107.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:48.027Z,1528887108.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:48.045Z,1528887108.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:48.404Z,1528887108.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:48.431Z,1528887108.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:48.803Z,1528887108.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:48.844Z,1528887108.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:49.225Z,1528887109.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:49.243Z,1528887109.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:49.632Z,1528887109.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:49.651Z,1528887109.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:50.020Z,1528887110.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:50.038Z,1528887110.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:50.404Z,1528887110.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:50.440Z,1528887110.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:50.801Z,1528887110.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:50.829Z,1528887110.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:51.224Z,1528887111.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:51.248Z,1528887111.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:51.622Z,1528887111.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:51.656Z,1528887111.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:52.020Z,1528887112.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:52.039Z,1528887112.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:52.407Z,1528887112.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:52.442Z,1528887112.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:52.809Z,1528887112.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:52.855Z,1528887112.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:53.228Z,1528887113.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:53.246Z,1528887113.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:53.625Z,1528887113.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:53.643Z,1528887113.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:54.022Z,1528887114.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:54.080Z,1528887114.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:54.410Z,1528887114.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:54.456Z,1528887114.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:54.807Z,1528887114.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:54.844Z,1528887114.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:55.224Z,1528887115.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:55.248Z,1528887115.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:55.615Z,1528887115.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:55.652Z,1528887115.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:56.023Z,1528887116.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:56.042Z,1528887116.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:56.409Z,1528887116.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:56.438Z,1528887116.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:56.803Z,1528887116.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:56.841Z,1528887116.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:57.219Z,1528887117.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:57.255Z,1528887117.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:51:57.628Z,1528887117.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:51:57.647Z,1528887117.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:00.750Z,1528887120.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:00.768Z,1528887120.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:00.911Z,1528887120.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:00.954Z,1528887120.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:01.308Z,1528887121.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:01.347Z,1528887121.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:01.712Z,1528887121.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:01.747Z,1528887121.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:02.107Z,1528887122.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:02.125Z,1528887122.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:02.522Z,1528887122.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:02.563Z,1528887122.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:02.918Z,1528887122.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:02.956Z,1528887122.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:03.322Z,1528887123.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:03.360Z,1528887123.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:03.709Z,1528887123.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:03.742Z,1528887123.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:04.113Z,1528887124.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:04.169Z,1528887124.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:04.514Z,1528887124.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:04.532Z,1528887124.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:04.914Z,1528887124.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:04.932Z,1528887124.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:05.322Z,1528887125.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:05.340Z,1528887125.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:05.723Z,1528887125.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:05.748Z,1528887125.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:06.122Z,1528887126.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:06.141Z,1528887126.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:06.512Z,1528887126.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:06.537Z,1528887126.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:06.903Z,1528887126.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:06.948Z,1528887126.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:07.311Z,1528887127.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:07.346Z,1528887127.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:07.708Z,1528887127.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:07.740Z,1528887127.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:08.107Z,1528887128.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:08.143Z,1528887128.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:08.529Z,1528887128.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:08.547Z,1528887128.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:08.927Z,1528887128.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:08.945Z,1528887128.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:09.323Z,1528887129.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:09.341Z,1528887129.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:09.707Z,1528887129.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:09.741Z,1528887129.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:10.107Z,1528887130.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:10.139Z,1528887130.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:10.508Z,1528887130.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:10.538Z,1528887130.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:10.907Z,1528887130.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:10.941Z,1528887130.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:11.313Z,1528887131.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:11.349Z,1528887131.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:11.726Z,1528887131.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:11.744Z,1528887131.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:12.128Z,1528887132.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:12.146Z,1528887132.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:12.503Z,1528887132.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:12.540Z,1528887132.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:12.907Z,1528887132.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:12.943Z,1528887132.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:13.311Z,1528887133.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:13.341Z,1528887133.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:13.704Z,1528887133.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:13.743Z,1528887133.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:14.107Z,1528887134.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:14.139Z,1528887134.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:14.528Z,1528887134.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:14.547Z,1528887134.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:14.924Z,1528887134.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:14.948Z,1528887134.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:15.332Z,1528887135.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:15.368Z,1528887135.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:15.707Z,1528887135.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:15.734Z,1528887135.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:16.107Z,1528887136.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:16.147Z,1528887136.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:16.508Z,1528887136.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:16.538Z,1528887136.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:16.907Z,1528887136.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:16.925Z,1528887136.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:17.322Z,1528887137.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:17.356Z,1528887137.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:17.725Z,1528887137.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:17.752Z,1528887137.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:18.125Z,1528887138.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:18.155Z,1528887138.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:18.511Z,1528887138.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:18.552Z,1528887138.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:18.910Z,1528887138.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:18.928Z,1528887138.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:19.310Z,1528887139.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:19.336Z,1528887139.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:19.709Z,1528887139.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:19.761Z,1528887139.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:20.111Z,1528887140.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:20.128Z,1528887140.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:20.521Z,1528887140.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:20.540Z,1528887140.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:20.921Z,1528887140.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:20.939Z,1528887140.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:21.318Z,1528887141.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:21.336Z,1528887141.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:21.713Z,1528887141.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:21.732Z,1528887141.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:22.108Z,1528887142.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:22.142Z,1528887142.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:22.513Z,1528887142.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:22.531Z,1528887142.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:22.914Z,1528887142.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:22.932Z,1528887142.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:23.318Z,1528887143.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:23.340Z,1528887143.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:23.721Z,1528887143.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:23.739Z,1528887143.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:24.118Z,1528887144.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:24.144Z,1528887144.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:24.513Z,1528887144.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:24.531Z,1528887144.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:24.916Z,1528887144.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:24.935Z,1528887144.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:25.314Z,1528887145.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:25.332Z,1528887145.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:25.713Z,1528887145.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:25.736Z,1528887145.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:26.111Z,1528887146.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:26.133Z,1528887146.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:26.521Z,1528887146.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:26.540Z,1528887146.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:26.918Z,1528887146.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:26.936Z,1528887146.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:27.318Z,1528887147.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:27.340Z,1528887147.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:27.711Z,1528887147.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:27.744Z,1528887147.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:28.113Z,1528887148.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:28.131Z,1528887148.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:28.513Z,1528887148.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:28.531Z,1528887148.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:28.918Z,1528887148.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:28.937Z,1528887148.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:29.318Z,1528887149.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:29.340Z,1528887149.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:29.721Z,1528887149.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:29.739Z,1528887149.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:30.121Z,1528887150.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:30.140Z,1528887150.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:30.509Z,1528887150.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:30.527Z,1528887150.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:30.907Z,1528887150.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:30.938Z,1528887150.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:31.314Z,1528887151.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:31.332Z,1528887151.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:31.708Z,1528887151.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:31.740Z,1528887151.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:32.110Z,1528887152.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:32.152Z,1528887152.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:32.527Z,1528887152.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:32.546Z,1528887152.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:32.926Z,1528887152.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:32.949Z,1528887152.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:33.324Z,1528887153.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:33.348Z,1528887153.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:33.715Z,1528887153.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:33.738Z,1528887153.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:34.103Z,1528887154.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:34.138Z,1528887154.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:34.508Z,1528887154.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:34.536Z,1528887154.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:34.907Z,1528887154.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:34.936Z,1528887154.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:35.325Z,1528887155.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:35.343Z,1528887155.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:35.726Z,1528887155.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:35.744Z,1528887155.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:36.124Z,1528887156.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:36.143Z,1528887156.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:36.504Z,1528887156.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:36.540Z,1528887156.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:36.907Z,1528887156.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:36.936Z,1528887156.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:37.329Z,1528887157.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:37.347Z,1528887157.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:37.725Z,1528887157.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:37.744Z,1528887157.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:38.126Z,1528887158.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:38.144Z,1528887158.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:38.504Z,1528887158.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:38.544Z,1528887158.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:38.903Z,1528887158.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:38.930Z,1528887158.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:39.329Z,1528887159.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:39.351Z,1528887159.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:39.717Z,1528887159.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:39.748Z,1528887159.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:40.114Z,1528887160.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:40.151Z,1528887160.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:40.509Z,1528887160.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:40.547Z,1528887160.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:40.907Z,1528887160.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:40.941Z,1528887160.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:41.318Z,1528887161.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:41.353Z,1528887161.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:41.722Z,1528887161.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:41.750Z,1528887161.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:42.122Z,1528887162.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:42.151Z,1528887162.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:42.508Z,1528887162.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:42.527Z,1528887162.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:42.911Z,1528887162.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:42.929Z,1528887162.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:43.317Z,1528887163.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:43.336Z,1528887163.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:43.721Z,1528887163.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:43.740Z,1528887163.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:44.118Z,1528887164.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:44.136Z,1528887164.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:44.513Z,1528887164.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:44.531Z,1528887164.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:44.911Z,1528887164.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:44.935Z,1528887164.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:45.326Z,1528887165.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:45.376Z,1528887165.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:45.721Z,1528887165.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:45.739Z,1528887165.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:46.118Z,1528887166.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:46.136Z,1528887166.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:46.511Z,1528887166.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:46.542Z,1528887166.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:46.916Z,1528887166.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:46.934Z,1528887166.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:47.319Z,1528887167.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:47.337Z,1528887167.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:47.721Z,1528887167.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:47.739Z,1528887167.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:48.119Z,1528887168.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:48.136Z,1528887168.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:48.514Z,1528887168.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:48.531Z,1528887168.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:48.912Z,1528887168.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:48.930Z,1528887168.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:49.321Z,1528887169.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:49.344Z,1528887169.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:49.722Z,1528887169.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:49.744Z,1528887169.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:50.126Z,1528887170.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:50.143Z,1528887170.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:50.514Z,1528887170.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:50.532Z,1528887170.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:50.913Z,1528887170.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:50.931Z,1528887170.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:51.322Z,1528887171.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:51.340Z,1528887171.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:51.726Z,1528887171.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:51.744Z,1528887171.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:52.127Z,1528887172.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:52.145Z,1528887172.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:52.514Z,1528887172.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:52.531Z,1528887172.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:52.914Z,1528887172.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:52.932Z,1528887172.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:53.326Z,1528887173.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:53.344Z,1528887173.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:53.726Z,1528887173.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:53.748Z,1528887173.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:54.127Z,1528887174.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:54.152Z,1528887174.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:54.511Z,1528887174.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:54.535Z,1528887174.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:54.919Z,1528887174.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:54.937Z,1528887174.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:55.327Z,1528887175.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:55.352Z,1528887175.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:55.726Z,1528887175.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:55.748Z,1528887175.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:56.123Z,1528887176.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:56.141Z,1528887176.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:56.518Z,1528887176.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:56.536Z,1528887176.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:56.912Z,1528887176.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:56.938Z,1528887176.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:57.326Z,1528887177.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:57.348Z,1528887177.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:52:57.727Z,1528887177.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:52:57.751Z,1528887177.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:00.834Z,1528887180.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:00.884Z,1528887180.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:00.999Z,1528887180.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:01.031Z,1528887181.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:01.395Z,1528887181.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:01.430Z,1528887181.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:01.796Z,1528887181.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:01.827Z,1528887181.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:02.195Z,1528887182.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:02.214Z,1528887182.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:02.614Z,1528887182.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:02.643Z,1528887182.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:03.014Z,1528887183.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:03.048Z,1528887183.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:03.410Z,1528887183.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:03.443Z,1528887183.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:03.799Z,1528887183.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:03.817Z,1528887183.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:04.199Z,1528887184.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:04.237Z,1528887184.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:04.599Z,1528887184.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:04.624Z,1528887184.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:05.001Z,1528887185.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:05.019Z,1528887185.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:05.410Z,1528887185.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:05.428Z,1528887185.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:05.810Z,1528887185.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:05.828Z,1528887185.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:06.210Z,1528887186.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:06.227Z,1528887186.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:06.600Z,1528887186.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:06.618Z,1528887186.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:07.002Z,1528887187.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:07.020Z,1528887187.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:07.401Z,1528887187.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:07.418Z,1528887187.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:07.803Z,1528887187.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:07.821Z,1528887187.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:08.202Z,1528887188.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:08.220Z,1528887188.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:08.610Z,1528887188.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:08.628Z,1528887188.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:09.011Z,1528887189.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:09.029Z,1528887189.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:09.406Z,1528887189.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:09.424Z,1528887189.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:09.801Z,1528887189.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:09.819Z,1528887189.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:10.200Z,1528887190.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:10.218Z,1528887190.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:10.600Z,1528887190.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:10.618Z,1528887190.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:11.001Z,1528887191.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:11.020Z,1528887191.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:11.406Z,1528887191.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:11.424Z,1528887191.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:11.810Z,1528887191.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:11.828Z,1528887191.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:12.210Z,1528887192.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:12.228Z,1528887192.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:12.600Z,1528887192.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:12.618Z,1528887192.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:13.000Z,1528887193.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:13.018Z,1528887193.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:13.401Z,1528887193.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:13.419Z,1528887193.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:13.802Z,1528887193.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:13.820Z,1528887193.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:14.200Z,1528887194.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:14.224Z,1528887194.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:14.610Z,1528887194.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:14.628Z,1528887194.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:15.010Z,1528887195.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:15.028Z,1528887195.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:15.406Z,1528887195.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:15.424Z,1528887195.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:15.801Z,1528887195.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:15.820Z,1528887195.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:16.200Z,1528887196.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:16.219Z,1528887196.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:16.603Z,1528887196.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:16.621Z,1528887196.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:17.001Z,1528887197.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:17.019Z,1528887197.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:17.410Z,1528887197.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:17.428Z,1528887197.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:17.810Z,1528887197.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:17.828Z,1528887197.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:18.211Z,1528887198.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:18.228Z,1528887198.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:18.601Z,1528887198.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:18.619Z,1528887198.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:19.000Z,1528887199.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:19.024Z,1528887199.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:19.402Z,1528887199.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:19.420Z,1528887199.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:19.801Z,1528887199.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:19.819Z,1528887199.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:20.200Z,1528887200.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:20.219Z,1528887200.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:20.610Z,1528887200.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:20.655Z,1528887200.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:21.010Z,1528887201.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:21.028Z,1528887201.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:21.414Z,1528887201.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:21.452Z,1528887201.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:21.804Z,1528887201.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:21.821Z,1528887201.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:22.202Z,1528887202.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:22.224Z,1528887202.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:22.599Z,1528887202.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:22.632Z,1528887202.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:23.002Z,1528887203.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:23.025Z,1528887203.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:23.409Z,1528887203.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:23.427Z,1528887203.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:23.814Z,1528887203.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:23.836Z,1528887203.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:24.210Z,1528887204.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:24.228Z,1528887204.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:24.603Z,1528887204.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:24.620Z,1528887204.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:24.999Z,1528887204.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:25.032Z,1528887205.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:25.404Z,1528887205.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:25.422Z,1528887205.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:25.803Z,1528887205.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:25.825Z,1528887205.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:26.200Z,1528887206.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:26.226Z,1528887206.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:26.612Z,1528887206.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:26.630Z,1528887206.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:27.013Z,1528887207.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:27.031Z,1528887207.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:27.412Z,1528887207.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:27.431Z,1528887207.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:27.800Z,1528887207.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:27.826Z,1528887207.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:28.196Z,1528887208.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:28.233Z,1528887208.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:28.601Z,1528887208.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:28.626Z,1528887208.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:28.999Z,1528887208.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:29.026Z,1528887209.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:29.406Z,1528887209.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:29.439Z,1528887209.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:29.816Z,1528887209.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:29.834Z,1528887209.834 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:29.835Z,1528887209.835 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 149
2018-06-13T10:53:29.835Z,1528887209.835 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:53:29.836Z,1528887209.836 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:29.836Z,1528887209.836 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 149
2018-06-13T10:53:29.837Z,1528887209.837 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:53:29.838Z,1528887209.838 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:29.839Z,1528887209.839 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 149
2018-06-13T10:53:29.839Z,1528887209.839 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:53:29.925Z,1528887209.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:53:29.925Z,1528887209.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:53:29.926Z,1528887209.926 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:53:30.215Z,1528887210.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:30.325Z,1528887210.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:53:30.325Z,1528887210.325 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 149
2018-06-13T10:53:30.325Z,1528887210.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:53:30.326Z,1528887210.326 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 149
2018-06-13T10:53:30.326Z,1528887210.326 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:53:30.326Z,1528887210.326 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 149
2018-06-13T10:53:30.591Z,1528887210.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:30.621Z,1528887210.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:53:30.621Z,1528887210.621 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:53:30.622Z,1528887210.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:53:30.622Z,1528887210.622 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:53:30.622Z,1528887210.622 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:53:30.623Z,1528887210.623 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:53:30.623Z,1528887210.623 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:53:30.623Z,1528887210.623 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:53:30.624Z,1528887210.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:53:30.995Z,1528887210.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:31.032Z,1528887211.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:53:31.037Z,1528887211.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:31.396Z,1528887211.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:31.415Z,1528887211.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:53:31.415Z,1528887211.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:31.793Z,1528887211.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:31.811Z,1528887211.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:53:31.812Z,1528887211.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:32.199Z,1528887212.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:32.217Z,1528887212.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:53:32.218Z,1528887212.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:32.610Z,1528887212.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:32.648Z,1528887212.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:53:32.653Z,1528887212.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:33.006Z,1528887213.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:33.024Z,1528887213.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:53:33.025Z,1528887213.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:33.406Z,1528887213.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:33.424Z,1528887213.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:53:33.425Z,1528887213.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:33.802Z,1528887213.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:33.820Z,1528887213.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:53:33.821Z,1528887213.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:34.195Z,1528887214.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:34.231Z,1528887214.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:53:34.232Z,1528887214.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:34.602Z,1528887214.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:34.620Z,1528887214.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:53:34.621Z,1528887214.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:34.999Z,1528887214.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:35.033Z,1528887215.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:53:35.034Z,1528887215.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:35.409Z,1528887215.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:35.427Z,1528887215.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:53:35.428Z,1528887215.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:35.811Z,1528887215.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:35.836Z,1528887215.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:53:35.837Z,1528887215.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:36.211Z,1528887216.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:36.236Z,1528887216.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:53:36.237Z,1528887216.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:36.602Z,1528887216.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:36.624Z,1528887216.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:53:36.625Z,1528887216.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:37.001Z,1528887217.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:37.019Z,1528887217.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:53:37.020Z,1528887217.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:37.410Z,1528887217.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:37.448Z,1528887217.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:53:37.457Z,1528887217.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:37.816Z,1528887217.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:37.834Z,1528887217.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:53:37.834Z,1528887217.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:38.210Z,1528887218.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:38.242Z,1528887218.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:53:38.243Z,1528887218.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:38.596Z,1528887218.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:38.632Z,1528887218.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:53:38.637Z,1528887218.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:38.995Z,1528887218.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:39.031Z,1528887219.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:53:39.032Z,1528887219.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:39.410Z,1528887219.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:39.433Z,1528887219.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:53:39.434Z,1528887219.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:39.818Z,1528887219.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:39.835Z,1528887219.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:53:39.836Z,1528887219.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:40.202Z,1528887220.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:40.238Z,1528887220.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:53:40.239Z,1528887220.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:40.595Z,1528887220.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:40.631Z,1528887220.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:53:40.632Z,1528887220.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:40.995Z,1528887220.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:41.034Z,1528887221.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:53:41.035Z,1528887221.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:41.406Z,1528887221.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:41.442Z,1528887221.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:53:41.443Z,1528887221.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:41.814Z,1528887221.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:41.838Z,1528887221.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:53:41.839Z,1528887221.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:42.221Z,1528887222.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:42.239Z,1528887222.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:53:42.240Z,1528887222.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:42.600Z,1528887222.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:42.630Z,1528887222.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:53:42.631Z,1528887222.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:42.999Z,1528887222.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:43.032Z,1528887223.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T10:53:43.032Z,1528887223.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:43.418Z,1528887223.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:43.435Z,1528887223.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:53:43.436Z,1528887223.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:43.816Z,1528887223.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:43.835Z,1528887223.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:53:43.836Z,1528887223.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:44.206Z,1528887224.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:44.243Z,1528887224.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:53:44.244Z,1528887224.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:44.597Z,1528887224.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:44.631Z,1528887224.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:53:44.632Z,1528887224.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:44.995Z,1528887224.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:45.035Z,1528887225.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T10:53:45.036Z,1528887225.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:45.406Z,1528887225.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:45.433Z,1528887225.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:53:45.434Z,1528887225.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:45.810Z,1528887225.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:45.847Z,1528887225.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:53:45.848Z,1528887225.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:46.211Z,1528887226.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:46.238Z,1528887226.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T10:53:46.239Z,1528887226.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:46.596Z,1528887226.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:46.634Z,1528887226.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:53:46.635Z,1528887226.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:46.995Z,1528887226.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:47.013Z,1528887227.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:53:47.014Z,1528887227.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:47.406Z,1528887227.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:47.440Z,1528887227.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:53:47.441Z,1528887227.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:47.814Z,1528887227.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:47.845Z,1528887227.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:53:47.846Z,1528887227.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:48.212Z,1528887228.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:48.247Z,1528887228.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T10:53:48.248Z,1528887228.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:48.599Z,1528887228.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:48.617Z,1528887228.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:53:48.618Z,1528887228.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:48.998Z,1528887228.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:49.016Z,1528887229.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T10:53:49.017Z,1528887229.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:49.417Z,1528887229.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:49.445Z,1528887229.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:53:49.446Z,1528887229.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:49.814Z,1528887229.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:49.846Z,1528887229.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:50.210Z,1528887230.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:50.244Z,1528887230.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:50.598Z,1528887230.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:50.620Z,1528887230.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:51.001Z,1528887231.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:51.024Z,1528887231.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:51.413Z,1528887231.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:51.450Z,1528887231.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:51.810Z,1528887231.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:51.828Z,1528887231.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:52.206Z,1528887232.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:52.225Z,1528887232.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:52.605Z,1528887232.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:52.623Z,1528887232.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:53.003Z,1528887233.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:53.021Z,1528887233.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:53.407Z,1528887233.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:53.426Z,1528887233.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:53.810Z,1528887233.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:53.828Z,1528887233.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:54.210Z,1528887234.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:54.229Z,1528887234.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:54.603Z,1528887234.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:54.621Z,1528887234.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:55.004Z,1528887235.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:55.022Z,1528887235.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:55.414Z,1528887235.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:55.457Z,1528887235.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:55.811Z,1528887235.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:55.829Z,1528887235.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:56.214Z,1528887236.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:56.232Z,1528887236.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:56.607Z,1528887236.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:56.626Z,1528887236.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:57.001Z,1528887237.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:57.019Z,1528887237.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:57.414Z,1528887237.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:57.436Z,1528887237.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:57.818Z,1528887237.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:57.836Z,1528887237.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:58.212Z,1528887238.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:58.230Z,1528887238.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:58.606Z,1528887238.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:58.624Z,1528887238.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:53:59.009Z,1528887239.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:53:59.032Z,1528887239.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:02.118Z,1528887242.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:02.136Z,1528887242.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:02.294Z,1528887242.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:02.312Z,1528887242.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:02.681Z,1528887242.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:02.709Z,1528887242.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:03.072Z,1528887243.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:03.106Z,1528887243.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:03.466Z,1528887243.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:03.484Z,1528887243.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:03.867Z,1528887243.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:03.885Z,1528887243.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:04.263Z,1528887244.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:04.281Z,1528887244.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:04.677Z,1528887244.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:04.711Z,1528887244.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:05.077Z,1528887245.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:05.095Z,1528887245.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:05.474Z,1528887245.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:05.492Z,1528887245.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:05.867Z,1528887245.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:05.885Z,1528887245.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:06.270Z,1528887246.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:06.289Z,1528887246.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:06.666Z,1528887246.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:06.684Z,1528887246.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:07.069Z,1528887247.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:07.087Z,1528887247.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:07.477Z,1528887247.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:07.496Z,1528887247.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:07.877Z,1528887247.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:07.895Z,1528887247.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:08.274Z,1528887248.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:08.292Z,1528887248.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:08.668Z,1528887248.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:08.692Z,1528887248.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:09.067Z,1528887249.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:09.086Z,1528887249.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:09.468Z,1528887249.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:09.486Z,1528887249.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:09.868Z,1528887249.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:09.894Z,1528887249.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:10.274Z,1528887250.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:10.292Z,1528887250.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:10.677Z,1528887250.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:10.700Z,1528887250.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:11.078Z,1528887251.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:11.097Z,1528887251.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:11.475Z,1528887251.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:11.506Z,1528887251.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:11.868Z,1528887251.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:11.904Z,1528887251.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:12.275Z,1528887252.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:12.294Z,1528887252.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:12.672Z,1528887252.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:12.690Z,1528887252.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:13.067Z,1528887253.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:13.092Z,1528887253.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:13.480Z,1528887253.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:13.498Z,1528887253.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:13.878Z,1528887253.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:13.900Z,1528887253.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:14.278Z,1528887254.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:14.297Z,1528887254.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:14.670Z,1528887254.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:14.688Z,1528887254.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:15.063Z,1528887255.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:15.087Z,1528887255.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:15.467Z,1528887255.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:15.491Z,1528887255.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:15.871Z,1528887255.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:15.899Z,1528887255.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:16.263Z,1528887256.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:16.287Z,1528887256.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:16.678Z,1528887256.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:16.697Z,1528887256.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:17.079Z,1528887257.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:17.097Z,1528887257.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:17.479Z,1528887257.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:17.498Z,1528887257.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:17.867Z,1528887257.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:17.891Z,1528887257.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:18.270Z,1528887258.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:18.300Z,1528887258.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:18.660Z,1528887258.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:18.696Z,1528887258.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:19.063Z,1528887259.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:19.099Z,1528887259.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:19.482Z,1528887259.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:19.506Z,1528887259.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:19.883Z,1528887259.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:19.901Z,1528887259.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:20.279Z,1528887260.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:20.297Z,1528887260.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:20.664Z,1528887260.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:20.694Z,1528887260.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:21.059Z,1528887261.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:21.100Z,1528887261.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:21.479Z,1528887261.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:21.497Z,1528887261.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:21.883Z,1528887261.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:21.902Z,1528887261.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:22.280Z,1528887262.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:22.298Z,1528887262.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:22.672Z,1528887262.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:22.690Z,1528887262.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:23.063Z,1528887263.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:23.096Z,1528887263.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:23.480Z,1528887263.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:23.498Z,1528887263.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:23.883Z,1528887263.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:23.901Z,1528887263.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:24.282Z,1528887264.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:24.314Z,1528887264.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:24.664Z,1528887264.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:24.692Z,1528887264.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:25.063Z,1528887265.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:25.090Z,1528887265.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:25.484Z,1528887265.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:25.503Z,1528887265.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:25.879Z,1528887265.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:25.897Z,1528887265.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:26.283Z,1528887266.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:26.301Z,1528887266.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:26.664Z,1528887266.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:26.704Z,1528887266.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:27.063Z,1528887267.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:27.090Z,1528887267.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:27.480Z,1528887267.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:27.498Z,1528887267.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:27.887Z,1528887267.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:27.905Z,1528887267.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:28.279Z,1528887268.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:28.297Z,1528887268.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:28.664Z,1528887268.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:28.698Z,1528887268.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:29.063Z,1528887269.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:29.104Z,1528887269.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:29.485Z,1528887269.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:29.503Z,1528887269.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:29.882Z,1528887269.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:29.912Z,1528887269.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:30.284Z,1528887270.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:30.302Z,1528887270.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:30.660Z,1528887270.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:30.694Z,1528887270.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:31.067Z,1528887271.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:31.101Z,1528887271.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:31.477Z,1528887271.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:31.516Z,1528887271.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:31.877Z,1528887271.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:31.904Z,1528887271.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:32.277Z,1528887272.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:32.305Z,1528887272.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:32.667Z,1528887272.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:32.701Z,1528887272.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:33.067Z,1528887273.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:33.085Z,1528887273.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:33.477Z,1528887273.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:33.512Z,1528887273.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:33.877Z,1528887273.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:33.912Z,1528887273.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:34.282Z,1528887274.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:34.308Z,1528887274.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:34.667Z,1528887274.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:34.685Z,1528887274.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:35.067Z,1528887275.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:35.085Z,1528887275.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:35.474Z,1528887275.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:35.508Z,1528887275.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:35.881Z,1528887275.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:35.914Z,1528887275.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:36.282Z,1528887276.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:36.316Z,1528887276.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:36.667Z,1528887276.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:36.692Z,1528887276.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:37.067Z,1528887277.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:37.092Z,1528887277.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:37.481Z,1528887277.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:37.516Z,1528887277.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:37.881Z,1528887277.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:37.899Z,1528887277.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:38.274Z,1528887278.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:38.297Z,1528887278.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:38.671Z,1528887278.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:38.689Z,1528887278.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:39.073Z,1528887279.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:39.092Z,1528887279.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:39.478Z,1528887279.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:39.496Z,1528887279.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:39.881Z,1528887279.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:39.900Z,1528887279.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:40.274Z,1528887280.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:40.296Z,1528887280.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:40.672Z,1528887280.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:40.690Z,1528887280.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:41.075Z,1528887281.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:41.093Z,1528887281.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:41.478Z,1528887281.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:41.496Z,1528887281.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:41.877Z,1528887281.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:41.919Z,1528887281.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:42.279Z,1528887282.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:42.320Z,1528887282.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:42.673Z,1528887282.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:42.691Z,1528887282.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:43.072Z,1528887283.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:43.096Z,1528887283.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:43.477Z,1528887283.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:43.500Z,1528887283.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:43.878Z,1528887283.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:43.904Z,1528887283.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:44.277Z,1528887284.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:44.300Z,1528887284.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:44.674Z,1528887284.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:44.692Z,1528887284.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:45.069Z,1528887285.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:45.087Z,1528887285.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:45.477Z,1528887285.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:45.495Z,1528887285.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:45.878Z,1528887285.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:45.896Z,1528887285.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:46.278Z,1528887286.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:46.296Z,1528887286.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:46.674Z,1528887286.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:46.692Z,1528887286.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:47.070Z,1528887287.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:47.096Z,1528887287.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:47.478Z,1528887287.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:47.519Z,1528887287.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:47.882Z,1528887287.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:47.904Z,1528887287.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:48.280Z,1528887288.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:48.298Z,1528887288.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:48.675Z,1528887288.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:48.693Z,1528887288.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:49.078Z,1528887289.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:49.096Z,1528887289.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:49.480Z,1528887289.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:49.498Z,1528887289.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:49.879Z,1528887289.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:49.904Z,1528887289.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:50.282Z,1528887290.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:50.300Z,1528887290.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:50.671Z,1528887290.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:50.704Z,1528887290.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:51.069Z,1528887291.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:51.087Z,1528887291.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:51.479Z,1528887291.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:51.498Z,1528887291.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:51.884Z,1528887291.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:51.903Z,1528887291.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:52.284Z,1528887292.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:52.302Z,1528887292.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:52.671Z,1528887292.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:52.701Z,1528887292.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:53.072Z,1528887293.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:53.091Z,1528887293.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:53.483Z,1528887293.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:53.502Z,1528887293.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:53.884Z,1528887293.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:53.923Z,1528887293.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:54.283Z,1528887294.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:54.302Z,1528887294.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:54.670Z,1528887294.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:54.696Z,1528887294.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:55.063Z,1528887295.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:55.095Z,1528887295.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:55.485Z,1528887295.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:55.503Z,1528887295.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:55.879Z,1528887295.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:55.905Z,1528887295.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:56.283Z,1528887296.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:56.301Z,1528887296.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:56.659Z,1528887296.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:56.696Z,1528887296.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:57.063Z,1528887297.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:57.094Z,1528887297.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:57.477Z,1528887297.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:57.495Z,1528887297.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:57.884Z,1528887297.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:57.902Z,1528887297.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:58.286Z,1528887298.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:58.305Z,1528887298.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:58.686Z,1528887298.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:58.711Z,1528887298.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:54:59.076Z,1528887299.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:54:59.094Z,1528887299.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:02.178Z,1528887302.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:02.197Z,1528887302.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:02.303Z,1528887302.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:02.337Z,1528887302.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:02.732Z,1528887302.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:02.751Z,1528887302.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:03.135Z,1528887303.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:03.153Z,1528887303.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:03.518Z,1528887303.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:03.552Z,1528887303.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:03.903Z,1528887303.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:03.920Z,1528887303.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:04.303Z,1528887304.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:04.328Z,1528887304.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:04.714Z,1528887304.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:04.732Z,1528887304.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:05.115Z,1528887305.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:05.132Z,1528887305.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:05.522Z,1528887305.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:05.556Z,1528887305.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:05.921Z,1528887305.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:05.939Z,1528887305.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:06.321Z,1528887306.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:06.363Z,1528887306.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:06.713Z,1528887306.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:06.731Z,1528887306.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:07.112Z,1528887307.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:07.130Z,1528887307.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:07.517Z,1528887307.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:07.536Z,1528887307.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:07.921Z,1528887307.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:07.939Z,1528887307.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:08.332Z,1528887308.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:08.356Z,1528887308.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:08.706Z,1528887308.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:08.724Z,1528887308.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:09.107Z,1528887309.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:09.125Z,1528887309.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:09.518Z,1528887309.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:09.552Z,1528887309.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:09.925Z,1528887309.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:09.952Z,1528887309.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:10.326Z,1528887310.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:10.356Z,1528887310.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:10.708Z,1528887310.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:10.741Z,1528887310.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:11.112Z,1528887311.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:11.130Z,1528887311.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:11.525Z,1528887311.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:11.558Z,1528887311.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:11.925Z,1528887311.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:11.958Z,1528887311.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:12.320Z,1528887312.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:12.359Z,1528887312.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:12.712Z,1528887312.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:12.730Z,1528887312.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:13.114Z,1528887313.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:13.156Z,1528887313.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:13.525Z,1528887313.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:13.566Z,1528887313.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:13.925Z,1528887313.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:13.959Z,1528887313.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:14.320Z,1528887314.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:14.361Z,1528887314.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:14.718Z,1528887314.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:14.735Z,1528887314.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:15.118Z,1528887315.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:15.136Z,1528887315.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:15.521Z,1528887315.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:15.540Z,1528887315.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:15.923Z,1528887315.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:15.941Z,1528887315.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:16.322Z,1528887316.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:16.344Z,1528887316.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:16.716Z,1528887316.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:16.734Z,1528887316.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:17.114Z,1528887317.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:17.132Z,1528887317.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:17.520Z,1528887317.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:17.544Z,1528887317.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:17.922Z,1528887317.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:17.940Z,1528887317.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:18.321Z,1528887318.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:18.344Z,1528887318.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:18.717Z,1528887318.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:18.735Z,1528887318.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:19.112Z,1528887319.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:19.139Z,1528887319.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:19.523Z,1528887319.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:19.548Z,1528887319.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:19.922Z,1528887319.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:19.940Z,1528887319.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:20.322Z,1528887320.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:20.340Z,1528887320.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:20.720Z,1528887320.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:20.739Z,1528887320.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:21.116Z,1528887321.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:21.134Z,1528887321.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:21.521Z,1528887321.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:21.539Z,1528887321.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:21.922Z,1528887321.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:21.940Z,1528887321.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:22.320Z,1528887322.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:22.344Z,1528887322.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:22.716Z,1528887322.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:22.734Z,1528887322.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:23.114Z,1528887323.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:23.131Z,1528887323.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:23.521Z,1528887323.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:23.540Z,1528887323.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:23.924Z,1528887323.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:23.944Z,1528887323.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:24.324Z,1528887324.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:24.341Z,1528887324.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:24.722Z,1528887324.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:24.740Z,1528887324.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:25.116Z,1528887325.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:25.134Z,1528887325.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:25.523Z,1528887325.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:25.544Z,1528887325.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:25.924Z,1528887325.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:25.942Z,1528887325.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:26.321Z,1528887326.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:26.344Z,1528887326.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:26.719Z,1528887326.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:26.737Z,1528887326.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:27.114Z,1528887327.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:27.148Z,1528887327.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:27.514Z,1528887327.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:27.565Z,1528887327.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:27.923Z,1528887327.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:27.941Z,1528887327.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:28.321Z,1528887328.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:28.339Z,1528887328.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:28.719Z,1528887328.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:28.764Z,1528887328.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:29.114Z,1528887329.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:29.145Z,1528887329.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:29.516Z,1528887329.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:29.534Z,1528887329.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:29.917Z,1528887329.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:29.940Z,1528887329.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:30.311Z,1528887330.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:30.346Z,1528887330.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:30.720Z,1528887330.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:30.741Z,1528887330.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.396397 seconds old.
2018-06-13T10:55:30.742Z,1528887330.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:30.743Z,1528887330.743 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.396841 seconds old.
2018-06-13T10:55:30.744Z,1528887330.744 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.397206 seconds old.
2018-06-13T10:55:31.124Z,1528887331.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:31.141Z,1528887331.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.795629 seconds old.
2018-06-13T10:55:31.142Z,1528887331.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:31.143Z,1528887331.143 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.796193 seconds old.
2018-06-13T10:55:31.144Z,1528887331.144 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.796548 seconds old.
2018-06-13T10:55:31.526Z,1528887331.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:31.562Z,1528887331.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.217205 seconds old.
2018-06-13T10:55:31.563Z,1528887331.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:31.564Z,1528887331.564 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.217514 seconds old.
2018-06-13T10:55:31.565Z,1528887331.565 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.217952 seconds old.
2018-06-13T10:55:31.906Z,1528887331.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:31.947Z,1528887331.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.601779 seconds old.
2018-06-13T10:55:31.948Z,1528887331.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:31.949Z,1528887331.949 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.602092 seconds old.
2018-06-13T10:55:31.950Z,1528887331.950 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.602673 seconds old.
2018-06-13T10:55:32.311Z,1528887332.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:32.351Z,1528887332.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:32.704Z,1528887332.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:32.736Z,1528887332.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:33.111Z,1528887333.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:33.137Z,1528887333.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:33.514Z,1528887333.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:33.552Z,1528887333.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:33.931Z,1528887333.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:33.949Z,1528887333.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:34.330Z,1528887334.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:34.348Z,1528887334.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:34.728Z,1528887334.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:34.746Z,1528887334.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:35.114Z,1528887335.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:35.151Z,1528887335.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:35.513Z,1528887335.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:35.538Z,1528887335.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:35.914Z,1528887335.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:35.937Z,1528887335.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:36.318Z,1528887336.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:36.352Z,1528887336.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:36.718Z,1528887336.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:36.756Z,1528887336.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:37.126Z,1528887337.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:37.150Z,1528887337.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:37.529Z,1528887337.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:37.556Z,1528887337.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:37.903Z,1528887337.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:37.935Z,1528887337.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:38.311Z,1528887338.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:38.353Z,1528887338.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:38.714Z,1528887338.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:38.742Z,1528887338.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:39.104Z,1528887339.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:39.143Z,1528887339.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:39.510Z,1528887339.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:39.538Z,1528887339.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:39.927Z,1528887339.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:39.973Z,1528887339.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:40.327Z,1528887340.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:40.350Z,1528887340.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:40.724Z,1528887340.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:40.746Z,1528887340.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:41.115Z,1528887341.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:41.142Z,1528887341.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:41.513Z,1528887341.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:41.553Z,1528887341.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:41.914Z,1528887341.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:41.931Z,1528887341.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:42.311Z,1528887342.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:42.342Z,1528887342.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:42.721Z,1528887342.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:42.742Z,1528887342.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:43.127Z,1528887343.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:43.171Z,1528887343.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:43.527Z,1528887343.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:43.551Z,1528887343.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:43.903Z,1528887343.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:43.933Z,1528887343.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:44.307Z,1528887344.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:44.338Z,1528887344.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:44.707Z,1528887344.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:44.737Z,1528887344.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:45.108Z,1528887345.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:45.136Z,1528887345.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:45.507Z,1528887345.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:45.551Z,1528887345.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:45.931Z,1528887345.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:45.949Z,1528887345.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:46.323Z,1528887346.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:46.374Z,1528887346.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:46.723Z,1528887346.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:46.741Z,1528887346.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:47.107Z,1528887347.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:47.149Z,1528887347.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:47.507Z,1528887347.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:47.539Z,1528887347.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:47.908Z,1528887347.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:47.943Z,1528887347.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:48.305Z,1528887348.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:48.334Z,1528887348.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:48.690Z,1528887348.690 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T10:55:48.691Z,1528887348.691 [NAL9602] Data Fault, FailCount= 1
2018-06-13T10:55:48.691Z,1528887348.691 [NAL9602](ERROR): Data Fault
2018-06-13T10:55:48.708Z,1528887348.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:48.751Z,1528887348.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:48.825Z,1528887348.825 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T10:55:49.090Z,1528887349.090 [NAL9602](INFO): Powering down
2018-06-13T10:55:49.106Z,1528887349.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:49.157Z,1528887349.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:49.502Z,1528887349.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:49.539Z,1528887349.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:49.902Z,1528887349.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:49.929Z,1528887349.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:50.017Z,1528887350.017 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T10:55:50.017Z,1528887350.017 [NAL9602] No Fault, FailCount= 1
2018-06-13T10:55:50.305Z,1528887350.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:50.348Z,1528887350.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:50.706Z,1528887350.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:50.748Z,1528887350.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:51.102Z,1528887351.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:51.120Z,1528887351.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:51.506Z,1528887351.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:51.524Z,1528887351.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:51.910Z,1528887351.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:51.928Z,1528887351.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:52.309Z,1528887352.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:52.327Z,1528887352.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:52.710Z,1528887352.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:52.728Z,1528887352.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:53.109Z,1528887353.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:53.127Z,1528887353.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:53.507Z,1528887353.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:53.525Z,1528887353.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:53.910Z,1528887353.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:53.927Z,1528887353.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:54.309Z,1528887354.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:54.327Z,1528887354.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:54.709Z,1528887354.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:54.727Z,1528887354.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:55.112Z,1528887355.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:55.130Z,1528887355.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:55.511Z,1528887355.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:55.529Z,1528887355.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:55.908Z,1528887355.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:55.926Z,1528887355.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:56.311Z,1528887356.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:56.333Z,1528887356.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:56.712Z,1528887356.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:56.730Z,1528887356.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:57.108Z,1528887357.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:57.126Z,1528887357.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:57.511Z,1528887357.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:57.537Z,1528887357.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:57.540Z,1528887357.540 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T10:55:57.540Z,1528887357.540 [Default:CheckIn:C.Wait] Stopped
2018-06-13T10:55:57.540Z,1528887357.540 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T10:55:57.540Z,1528887357.540 [Default:CheckIn:D] Running Loop=1
2018-06-13T10:55:57.916Z,1528887357.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:55:57.934Z,1528887357.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:55:57.937Z,1528887357.937 [Default:CheckIn:D] Stopped
2018-06-13T10:55:57.937Z,1528887357.937 [Default:CheckIn:E] Running Loop=1
2018-06-13T10:56:01.026Z,1528887361.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:01.044Z,1528887361.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:01.048Z,1528887361.048 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 448.741536 min 
2018-06-13T10:56:01.048Z,1528887361.048 [Default:CheckIn:E] Stopped
2018-06-13T10:56:01.048Z,1528887361.048 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T10:56:01.048Z,1528887361.048 [Default:CheckIn] Stopped
2018-06-13T10:56:01.048Z,1528887361.048 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T10:56:01.048Z,1528887361.048 [Default:CheckIn](INFO): Running loop #44
2018-06-13T10:56:01.049Z,1528887361.049 [Default:CheckIn] Running Loop=44
2018-06-13T10:56:01.049Z,1528887361.049 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T10:56:01.049Z,1528887361.049 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T10:56:01.152Z,1528887361.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:01.192Z,1528887361.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:01.560Z,1528887361.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:01.595Z,1528887361.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:01.957Z,1528887361.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:01.996Z,1528887361.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:02.354Z,1528887362.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:02.389Z,1528887362.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:02.754Z,1528887362.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:02.796Z,1528887362.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:03.150Z,1528887363.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:03.191Z,1528887363.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:03.558Z,1528887363.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:03.591Z,1528887363.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:03.954Z,1528887363.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:03.993Z,1528887363.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:04.354Z,1528887364.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:04.389Z,1528887364.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:04.754Z,1528887364.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:04.794Z,1528887364.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:05.151Z,1528887365.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:05.173Z,1528887365.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:05.550Z,1528887365.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:05.609Z,1528887365.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:05.954Z,1528887365.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:05.974Z,1528887365.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:06.358Z,1528887366.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:06.406Z,1528887366.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:06.751Z,1528887366.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:06.774Z,1528887366.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:07.154Z,1528887367.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:07.208Z,1528887367.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:07.558Z,1528887367.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:07.580Z,1528887367.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:07.951Z,1528887367.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:07.975Z,1528887367.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:08.360Z,1528887368.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:08.402Z,1528887368.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:08.758Z,1528887368.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:08.805Z,1528887368.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:09.153Z,1528887369.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:09.171Z,1528887369.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:09.558Z,1528887369.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:09.607Z,1528887369.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:09.960Z,1528887369.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:10.006Z,1528887370.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:10.359Z,1528887370.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:10.408Z,1528887370.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:10.758Z,1528887370.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:10.777Z,1528887370.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:11.157Z,1528887371.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:11.181Z,1528887371.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:11.558Z,1528887371.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:11.581Z,1528887371.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:11.958Z,1528887371.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:12.006Z,1528887372.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:12.357Z,1528887372.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:12.376Z,1528887372.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:12.756Z,1528887372.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:12.778Z,1528887372.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:13.158Z,1528887373.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:13.181Z,1528887373.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:13.558Z,1528887373.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:13.575Z,1528887373.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:13.957Z,1528887373.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:13.976Z,1528887373.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:14.360Z,1528887374.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:14.384Z,1528887374.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:14.761Z,1528887374.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:14.783Z,1528887374.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:15.158Z,1528887375.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:15.176Z,1528887375.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:15.562Z,1528887375.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:15.580Z,1528887375.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:15.960Z,1528887375.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:15.980Z,1528887375.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:16.360Z,1528887376.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:16.384Z,1528887376.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:16.761Z,1528887376.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:16.779Z,1528887376.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:17.162Z,1528887377.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:17.181Z,1528887377.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:17.560Z,1528887377.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:17.579Z,1528887377.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:17.958Z,1528887377.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:18.003Z,1528887378.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:18.360Z,1528887378.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:18.378Z,1528887378.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:18.757Z,1528887378.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:18.776Z,1528887378.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:19.138Z,1528887379.138 [NAL9602](INFO): Powering up NAL9602
2018-06-13T10:56:19.166Z,1528887379.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:19.190Z,1528887379.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:19.560Z,1528887379.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:19.585Z,1528887379.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:19.957Z,1528887379.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:19.976Z,1528887379.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:20.359Z,1528887380.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:20.382Z,1528887380.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:20.759Z,1528887380.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:20.778Z,1528887380.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:21.156Z,1528887381.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:21.174Z,1528887381.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:21.559Z,1528887381.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:21.582Z,1528887381.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:21.960Z,1528887381.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:21.978Z,1528887381.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:22.360Z,1528887382.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:22.378Z,1528887382.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:22.758Z,1528887382.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:22.787Z,1528887382.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:23.160Z,1528887383.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:23.178Z,1528887383.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:23.560Z,1528887383.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:23.578Z,1528887383.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:23.958Z,1528887383.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:23.982Z,1528887383.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:24.360Z,1528887384.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:24.378Z,1528887384.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:24.757Z,1528887384.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:24.775Z,1528887384.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:25.150Z,1528887385.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:25.189Z,1528887385.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:25.550Z,1528887385.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:25.590Z,1528887385.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:25.950Z,1528887385.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:25.976Z,1528887385.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:26.353Z,1528887386.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:26.394Z,1528887386.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:26.751Z,1528887386.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:26.772Z,1528887386.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:27.150Z,1528887387.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:27.169Z,1528887387.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:27.555Z,1528887387.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:27.594Z,1528887387.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:27.956Z,1528887387.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:27.974Z,1528887387.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:28.357Z,1528887388.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:28.375Z,1528887388.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:28.760Z,1528887388.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:28.779Z,1528887388.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:29.159Z,1528887389.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:29.177Z,1528887389.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:29.559Z,1528887389.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:29.577Z,1528887389.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:29.966Z,1528887389.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:29.984Z,1528887389.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:30.338Z,1528887390.338 [NAL9602](INFO): NAL9602 initialized
2018-06-13T10:56:30.364Z,1528887390.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:30.383Z,1528887390.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:30.756Z,1528887390.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:30.780Z,1528887390.780 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:30.780Z,1528887390.780 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 150
2018-06-13T10:56:30.780Z,1528887390.780 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:56:30.783Z,1528887390.783 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:30.783Z,1528887390.783 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 150
2018-06-13T10:56:30.783Z,1528887390.783 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:56:30.785Z,1528887390.785 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:30.785Z,1528887390.785 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 150
2018-06-13T10:56:30.785Z,1528887390.785 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:56:30.877Z,1528887390.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:56:30.877Z,1528887390.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:56:30.878Z,1528887390.878 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:56:31.170Z,1528887391.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:31.269Z,1528887391.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:56:31.269Z,1528887391.269 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 150
2018-06-13T10:56:31.270Z,1528887391.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:56:31.270Z,1528887391.270 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 150
2018-06-13T10:56:31.270Z,1528887391.270 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:56:31.270Z,1528887391.270 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 150
2018-06-13T10:56:31.566Z,1528887391.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:31.583Z,1528887391.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:56:31.583Z,1528887391.583 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:56:31.584Z,1528887391.584 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:56:31.584Z,1528887391.584 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:56:31.585Z,1528887391.585 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:56:31.585Z,1528887391.585 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:56:31.585Z,1528887391.585 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:56:31.586Z,1528887391.586 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:56:31.586Z,1528887391.586 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:56:31.967Z,1528887391.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:31.984Z,1528887391.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:56:31.986Z,1528887391.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:32.351Z,1528887392.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:32.387Z,1528887392.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:56:32.388Z,1528887392.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:32.751Z,1528887392.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:32.789Z,1528887392.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:56:32.790Z,1528887392.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:33.151Z,1528887393.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:33.187Z,1528887393.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:56:33.188Z,1528887393.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:33.556Z,1528887393.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:33.584Z,1528887393.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:56:33.585Z,1528887393.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:33.976Z,1528887393.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:33.994Z,1528887393.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:56:33.995Z,1528887393.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:34.371Z,1528887394.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:34.388Z,1528887394.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:56:34.389Z,1528887394.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:34.772Z,1528887394.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:34.790Z,1528887394.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:56:34.791Z,1528887394.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:35.151Z,1528887395.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:35.181Z,1528887395.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:56:35.182Z,1528887395.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:35.555Z,1528887395.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:35.588Z,1528887395.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:56:35.589Z,1528887395.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:35.955Z,1528887395.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:35.972Z,1528887395.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:56:35.990Z,1528887395.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:36.359Z,1528887396.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:36.397Z,1528887396.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:56:36.398Z,1528887396.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:36.753Z,1528887396.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:36.771Z,1528887396.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:56:36.772Z,1528887396.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:37.169Z,1528887397.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:37.212Z,1528887397.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:56:37.214Z,1528887397.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:37.569Z,1528887397.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:37.603Z,1528887397.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:56:37.604Z,1528887397.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:37.965Z,1528887397.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:37.991Z,1528887397.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:56:37.992Z,1528887397.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:38.359Z,1528887398.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:38.376Z,1528887398.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:56:38.378Z,1528887398.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:38.758Z,1528887398.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:38.776Z,1528887398.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:56:38.777Z,1528887398.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:39.158Z,1528887399.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:39.175Z,1528887399.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:56:39.176Z,1528887399.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:39.558Z,1528887399.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:39.587Z,1528887399.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:56:39.588Z,1528887399.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:39.969Z,1528887399.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:39.987Z,1528887399.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:56:39.988Z,1528887399.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:40.366Z,1528887400.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:40.392Z,1528887400.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:56:40.393Z,1528887400.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:40.771Z,1528887400.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:40.788Z,1528887400.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:56:40.789Z,1528887400.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:41.159Z,1528887401.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:41.183Z,1528887401.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:56:41.184Z,1528887401.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:41.556Z,1528887401.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:41.574Z,1528887401.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:56:41.575Z,1528887401.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:41.951Z,1528887401.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:41.979Z,1528887401.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:56:41.980Z,1528887401.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:42.361Z,1528887402.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:42.379Z,1528887402.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:56:42.380Z,1528887402.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:42.751Z,1528887402.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:42.785Z,1528887402.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:56:42.786Z,1528887402.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:43.176Z,1528887403.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:43.195Z,1528887403.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:56:43.196Z,1528887403.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:43.575Z,1528887403.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:43.600Z,1528887403.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:56:43.601Z,1528887403.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:43.968Z,1528887403.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:43.986Z,1528887403.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T10:56:43.986Z,1528887403.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:44.355Z,1528887404.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:44.389Z,1528887404.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:56:44.390Z,1528887404.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:44.755Z,1528887404.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:44.788Z,1528887404.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:56:44.788Z,1528887404.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:45.151Z,1528887405.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:45.186Z,1528887405.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:56:45.187Z,1528887405.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:45.555Z,1528887405.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:45.592Z,1528887405.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:56:45.597Z,1528887405.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:45.969Z,1528887405.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:46.008Z,1528887406.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T10:56:46.013Z,1528887406.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:46.365Z,1528887406.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:46.398Z,1528887406.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:56:46.399Z,1528887406.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:46.769Z,1528887406.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:46.795Z,1528887406.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:56:46.796Z,1528887406.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:47.157Z,1528887407.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:47.175Z,1528887407.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T10:56:47.176Z,1528887407.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:47.559Z,1528887407.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:47.576Z,1528887407.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:56:47.577Z,1528887407.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:47.959Z,1528887407.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:47.977Z,1528887407.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:56:47.978Z,1528887407.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:48.358Z,1528887408.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:48.384Z,1528887408.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:56:48.385Z,1528887408.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:48.756Z,1528887408.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:48.774Z,1528887408.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:56:48.775Z,1528887408.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:49.169Z,1528887409.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:49.187Z,1528887409.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T10:56:49.188Z,1528887409.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:49.569Z,1528887409.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:49.587Z,1528887409.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:56:49.588Z,1528887409.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:49.966Z,1528887409.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:49.984Z,1528887409.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T10:56:49.985Z,1528887409.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:50.362Z,1528887410.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:50.379Z,1528887410.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:56:50.380Z,1528887410.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:50.761Z,1528887410.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:50.779Z,1528887410.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T10:56:50.780Z,1528887410.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:51.161Z,1528887411.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:51.179Z,1528887411.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:51.559Z,1528887411.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:51.584Z,1528887411.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:51.972Z,1528887411.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:51.990Z,1528887411.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:52.370Z,1528887412.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:52.388Z,1528887412.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:52.773Z,1528887412.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:52.791Z,1528887412.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:53.162Z,1528887413.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:53.179Z,1528887413.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:53.562Z,1528887413.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:53.580Z,1528887413.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:53.968Z,1528887413.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:53.987Z,1528887413.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:54.360Z,1528887414.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:54.378Z,1528887414.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:54.763Z,1528887414.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:54.824Z,1528887414.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:55.177Z,1528887415.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:55.195Z,1528887415.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:55.570Z,1528887415.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:55.600Z,1528887415.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:55.973Z,1528887415.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:55.991Z,1528887415.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:56.356Z,1528887416.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:56.396Z,1528887416.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:56.751Z,1528887416.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:56.785Z,1528887416.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:57.151Z,1528887417.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:57.180Z,1528887417.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:57.555Z,1528887417.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:57.590Z,1528887417.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:57.976Z,1528887417.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:57.000Z,1528887418.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:58.379Z,1528887418.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:58.397Z,1528887418.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:58.780Z,1528887418.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:58.799Z,1528887418.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:56:59.155Z,1528887419.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:56:59.184Z,1528887419.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:02.273Z,1528887422.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:02.291Z,1528887422.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:02.399Z,1528887422.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:02.436Z,1528887422.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:02.825Z,1528887422.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:02.848Z,1528887422.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:03.220Z,1528887423.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:03.239Z,1528887423.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:03.616Z,1528887423.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:03.635Z,1528887423.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:03.999Z,1528887423.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:04.037Z,1528887424.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:04.396Z,1528887424.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:04.429Z,1528887424.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:04.799Z,1528887424.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:04.833Z,1528887424.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:05.205Z,1528887425.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:05.244Z,1528887425.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:05.613Z,1528887425.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:05.648Z,1528887425.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:06.013Z,1528887426.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:06.055Z,1528887426.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:06.400Z,1528887426.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:06.424Z,1528887426.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:06.802Z,1528887426.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:06.820Z,1528887426.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:07.204Z,1528887427.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:07.225Z,1528887427.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:07.605Z,1528887427.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:07.623Z,1528887427.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:08.015Z,1528887428.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:08.033Z,1528887428.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:08.414Z,1528887428.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:08.436Z,1528887428.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:08.811Z,1528887428.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:08.828Z,1528887428.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:09.195Z,1528887429.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:09.236Z,1528887429.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:09.603Z,1528887429.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:09.638Z,1528887429.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:09.999Z,1528887429.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:10.032Z,1528887430.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:10.396Z,1528887430.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:10.432Z,1528887430.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:10.799Z,1528887430.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:10.835Z,1528887430.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:11.210Z,1528887431.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:11.228Z,1528887431.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:11.616Z,1528887431.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:11.635Z,1528887431.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:12.018Z,1528887432.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:12.044Z,1528887432.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:12.399Z,1528887432.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:12.427Z,1528887432.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:12.795Z,1528887432.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:12.830Z,1528887432.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:13.200Z,1528887433.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:13.228Z,1528887433.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:13.598Z,1528887433.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:13.626Z,1528887433.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:14.016Z,1528887434.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:14.034Z,1528887434.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:14.420Z,1528887434.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:14.438Z,1528887434.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:14.815Z,1528887434.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:14.840Z,1528887434.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:15.195Z,1528887435.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:15.236Z,1528887435.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:15.599Z,1528887435.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:15.635Z,1528887435.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:15.995Z,1528887435.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:16.024Z,1528887436.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:16.401Z,1528887436.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:16.438Z,1528887436.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:16.799Z,1528887436.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:16.832Z,1528887436.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:17.213Z,1528887437.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:17.246Z,1528887437.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:17.609Z,1528887437.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:17.637Z,1528887437.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:18.009Z,1528887438.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:18.036Z,1528887438.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:18.399Z,1528887438.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:18.416Z,1528887438.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:18.799Z,1528887438.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:18.833Z,1528887438.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:19.201Z,1528887439.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:19.219Z,1528887439.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:19.603Z,1528887439.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:19.620Z,1528887439.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:20.017Z,1528887440.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:20.046Z,1528887440.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:20.416Z,1528887440.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:20.446Z,1528887440.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:20.817Z,1528887440.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:20.845Z,1528887440.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:21.204Z,1528887441.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:21.261Z,1528887441.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:21.602Z,1528887441.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:21.620Z,1528887441.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:22.006Z,1528887442.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:22.023Z,1528887442.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:22.403Z,1528887442.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:22.420Z,1528887442.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:22.802Z,1528887442.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:22.820Z,1528887442.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:23.213Z,1528887443.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:23.253Z,1528887443.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:23.613Z,1528887443.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:23.647Z,1528887443.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:24.014Z,1528887444.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:24.032Z,1528887444.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:24.397Z,1528887444.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:24.428Z,1528887444.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:24.806Z,1528887444.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:24.824Z,1528887444.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:25.204Z,1528887445.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:25.222Z,1528887445.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:25.604Z,1528887445.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:25.628Z,1528887445.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:26.013Z,1528887446.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:26.056Z,1528887446.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:26.413Z,1528887446.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:26.431Z,1528887446.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:26.817Z,1528887446.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:26.840Z,1528887446.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:27.208Z,1528887447.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:27.228Z,1528887447.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:27.603Z,1528887447.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:27.625Z,1528887447.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:28.005Z,1528887448.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:28.023Z,1528887448.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:28.407Z,1528887448.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:28.432Z,1528887448.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:28.806Z,1528887448.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:28.824Z,1528887448.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:29.210Z,1528887449.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:29.228Z,1528887449.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:29.614Z,1528887449.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:29.632Z,1528887449.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:30.010Z,1528887450.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:30.028Z,1528887450.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:30.403Z,1528887450.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:30.435Z,1528887450.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:30.806Z,1528887450.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:30.825Z,1528887450.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:31.206Z,1528887451.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:31.224Z,1528887451.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:31.608Z,1528887451.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:31.626Z,1528887451.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:32.014Z,1528887452.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:32.032Z,1528887452.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:32.413Z,1528887452.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:32.431Z,1528887452.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:32.810Z,1528887452.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:32.828Z,1528887452.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:33.209Z,1528887453.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:33.228Z,1528887453.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:33.606Z,1528887453.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:33.624Z,1528887453.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:34.003Z,1528887454.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:34.034Z,1528887454.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:34.407Z,1528887454.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:34.425Z,1528887454.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:34.803Z,1528887454.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:34.825Z,1528887454.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:35.212Z,1528887455.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:35.230Z,1528887455.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:35.614Z,1528887455.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:35.632Z,1528887455.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:36.011Z,1528887456.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:36.028Z,1528887456.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:36.406Z,1528887456.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:36.432Z,1528887456.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:36.807Z,1528887456.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:36.825Z,1528887456.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:37.206Z,1528887457.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:37.224Z,1528887457.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:37.610Z,1528887457.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:37.628Z,1528887457.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:38.017Z,1528887458.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:38.035Z,1528887458.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:38.414Z,1528887458.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:38.436Z,1528887458.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:38.816Z,1528887458.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:38.840Z,1528887458.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:39.205Z,1528887459.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:39.227Z,1528887459.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:39.603Z,1528887459.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:39.628Z,1528887459.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:40.003Z,1528887460.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:40.030Z,1528887460.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:40.410Z,1528887460.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:40.428Z,1528887460.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:40.804Z,1528887460.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:40.834Z,1528887460.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:41.216Z,1528887461.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:41.234Z,1528887461.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:41.616Z,1528887461.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:41.634Z,1528887461.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:42.015Z,1528887462.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:42.040Z,1528887462.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:42.403Z,1528887462.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:42.439Z,1528887462.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:42.795Z,1528887462.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:42.826Z,1528887462.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:43.201Z,1528887463.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:43.230Z,1528887463.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:43.599Z,1528887463.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:43.634Z,1528887463.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:44.020Z,1528887464.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:44.039Z,1528887464.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:44.413Z,1528887464.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:44.436Z,1528887464.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:44.815Z,1528887464.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:44.834Z,1528887464.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:45.195Z,1528887465.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:45.234Z,1528887465.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:45.599Z,1528887465.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:45.629Z,1528887465.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:45.995Z,1528887465.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:46.013Z,1528887466.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:46.396Z,1528887466.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:46.420Z,1528887466.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:46.803Z,1528887466.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:46.821Z,1528887466.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:47.214Z,1528887467.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:47.248Z,1528887467.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:47.613Z,1528887467.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:47.631Z,1528887467.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:48.010Z,1528887468.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:48.028Z,1528887468.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:48.404Z,1528887468.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:48.428Z,1528887468.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:48.801Z,1528887468.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:48.820Z,1528887468.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:49.204Z,1528887469.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:49.225Z,1528887469.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:49.604Z,1528887469.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:49.622Z,1528887469.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:50.009Z,1528887470.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:50.027Z,1528887470.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:50.409Z,1528887470.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:50.427Z,1528887470.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:50.810Z,1528887470.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:50.828Z,1528887470.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:51.201Z,1528887471.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:51.219Z,1528887471.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:51.604Z,1528887471.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:51.622Z,1528887471.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:51.998Z,1528887471.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:52.033Z,1528887472.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:52.402Z,1528887472.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:52.420Z,1528887472.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:52.803Z,1528887472.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:52.829Z,1528887472.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:53.210Z,1528887473.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:53.248Z,1528887473.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:53.616Z,1528887473.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:53.634Z,1528887473.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:54.014Z,1528887474.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:54.033Z,1528887474.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:54.403Z,1528887474.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:54.438Z,1528887474.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:54.795Z,1528887474.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:54.828Z,1528887474.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:55.200Z,1528887475.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:55.230Z,1528887475.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:55.599Z,1528887475.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:55.637Z,1528887475.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:56.009Z,1528887476.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:56.037Z,1528887476.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:56.420Z,1528887476.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:56.438Z,1528887476.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:56.810Z,1528887476.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:56.848Z,1528887476.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:57.195Z,1528887477.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:57.221Z,1528887477.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:57.603Z,1528887477.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:57.642Z,1528887477.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:57.999Z,1528887477.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:57:58.008Z,1528887478.008 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T10:57:58.008Z,1528887478.008 [BPC1] Communications Fault, FailCount= 1
2018-06-13T10:57:58.009Z,1528887478.009 [BPC1](ERROR): Communications Fault
2018-06-13T10:57:58.019Z,1528887478.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:57:58.130Z,1528887478.130 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T10:58:01.115Z,1528887481.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:01.147Z,1528887481.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:01.263Z,1528887481.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:01.293Z,1528887481.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:01.680Z,1528887481.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:01.704Z,1528887481.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:01.781Z,1528887481.781 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T10:58:01.781Z,1528887481.781 [BPC1] No Fault, FailCount= 1
2018-06-13T10:58:02.073Z,1528887482.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:02.160Z,1528887482.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:02.469Z,1528887482.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:02.497Z,1528887482.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:02.860Z,1528887482.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:02.893Z,1528887482.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:03.259Z,1528887483.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:03.277Z,1528887483.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:03.659Z,1528887483.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:03.676Z,1528887483.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:04.073Z,1528887484.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:04.112Z,1528887484.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:04.469Z,1528887484.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:04.487Z,1528887484.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:04.874Z,1528887484.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:04.892Z,1528887484.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:05.264Z,1528887485.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:05.282Z,1528887485.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:05.662Z,1528887485.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:05.680Z,1528887485.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:06.064Z,1528887486.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:06.081Z,1528887486.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:06.464Z,1528887486.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:06.482Z,1528887486.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:06.862Z,1528887486.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:06.879Z,1528887486.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:07.269Z,1528887487.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:07.287Z,1528887487.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:07.673Z,1528887487.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:07.715Z,1528887487.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:08.070Z,1528887488.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:08.088Z,1528887488.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:08.465Z,1528887488.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:08.483Z,1528887488.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:08.865Z,1528887488.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:08.883Z,1528887488.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:09.261Z,1528887489.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:09.279Z,1528887489.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:09.666Z,1528887489.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:09.683Z,1528887489.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:10.070Z,1528887490.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:10.092Z,1528887490.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:10.473Z,1528887490.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:10.491Z,1528887490.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:10.874Z,1528887490.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:10.891Z,1528887490.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:11.265Z,1528887491.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:11.283Z,1528887491.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:11.662Z,1528887491.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:11.680Z,1528887491.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:12.065Z,1528887492.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:12.082Z,1528887492.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:12.466Z,1528887492.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:12.484Z,1528887492.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:12.861Z,1528887492.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:12.879Z,1528887492.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:13.273Z,1528887493.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:13.291Z,1528887493.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:13.673Z,1528887493.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:13.691Z,1528887493.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:14.070Z,1528887494.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:14.088Z,1528887494.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:14.463Z,1528887494.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:14.495Z,1528887494.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:14.863Z,1528887494.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:14.893Z,1528887494.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:15.262Z,1528887495.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:15.280Z,1528887495.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:15.665Z,1528887495.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:15.682Z,1528887495.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:16.074Z,1528887496.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:16.092Z,1528887496.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:16.475Z,1528887496.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:16.493Z,1528887496.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:16.873Z,1528887496.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:16.891Z,1528887496.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:17.263Z,1528887497.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:17.287Z,1528887497.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:17.661Z,1528887497.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:17.679Z,1528887497.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:18.065Z,1528887498.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:18.082Z,1528887498.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:18.463Z,1528887498.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:18.487Z,1528887498.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:18.862Z,1528887498.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:18.879Z,1528887498.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:19.274Z,1528887499.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:19.292Z,1528887499.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:19.674Z,1528887499.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:19.692Z,1528887499.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:20.074Z,1528887500.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:20.092Z,1528887500.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:20.463Z,1528887500.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:20.486Z,1528887500.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:20.863Z,1528887500.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:20.887Z,1528887500.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:21.265Z,1528887501.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:21.283Z,1528887501.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:21.665Z,1528887501.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:21.683Z,1528887501.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:22.076Z,1528887502.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:22.094Z,1528887502.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:22.476Z,1528887502.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:22.494Z,1528887502.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:22.875Z,1528887502.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:22.892Z,1528887502.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:23.263Z,1528887503.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:23.289Z,1528887503.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:23.663Z,1528887503.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:23.681Z,1528887503.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:24.070Z,1528887504.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:24.088Z,1528887504.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:24.464Z,1528887504.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:24.495Z,1528887504.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:24.856Z,1528887504.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:24.892Z,1528887504.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:25.280Z,1528887505.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:25.298Z,1528887505.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:25.679Z,1528887505.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:25.697Z,1528887505.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:26.079Z,1528887506.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:26.096Z,1528887506.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:26.466Z,1528887506.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:26.484Z,1528887506.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:26.866Z,1528887506.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:26.884Z,1528887506.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:27.266Z,1528887507.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:27.286Z,1528887507.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:27.664Z,1528887507.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:27.683Z,1528887507.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:28.076Z,1528887508.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:28.095Z,1528887508.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:28.475Z,1528887508.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:28.495Z,1528887508.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:28.878Z,1528887508.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:28.898Z,1528887508.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:29.264Z,1528887509.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:29.283Z,1528887509.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:29.666Z,1528887509.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:29.683Z,1528887509.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:30.064Z,1528887510.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:30.083Z,1528887510.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:30.466Z,1528887510.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:30.484Z,1528887510.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:30.867Z,1528887510.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:30.884Z,1528887510.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:31.274Z,1528887511.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:31.292Z,1528887511.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:31.675Z,1528887511.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:31.694Z,1528887511.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:32.076Z,1528887512.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:32.100Z,1528887512.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:32.465Z,1528887512.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:32.482Z,1528887512.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:32.863Z,1528887512.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:32.888Z,1528887512.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:33.255Z,1528887513.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:33.294Z,1528887513.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:33.655Z,1528887513.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:33.691Z,1528887513.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:34.075Z,1528887514.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:34.093Z,1528887514.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:34.475Z,1528887514.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:34.493Z,1528887514.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:34.871Z,1528887514.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:34.890Z,1528887514.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:35.259Z,1528887515.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:35.296Z,1528887515.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:35.656Z,1528887515.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:35.692Z,1528887515.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:36.059Z,1528887516.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:36.095Z,1528887516.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:36.455Z,1528887516.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:36.492Z,1528887516.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:36.855Z,1528887516.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:36.889Z,1528887516.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:37.275Z,1528887517.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:37.293Z,1528887517.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:37.680Z,1528887517.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:37.698Z,1528887517.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:38.076Z,1528887518.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:38.094Z,1528887518.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:38.459Z,1528887518.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:38.497Z,1528887518.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:38.859Z,1528887518.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:38.896Z,1528887518.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:39.260Z,1528887519.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:39.292Z,1528887519.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:39.659Z,1528887519.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:39.696Z,1528887519.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:40.076Z,1528887520.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:40.094Z,1528887520.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:40.477Z,1528887520.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:40.495Z,1528887520.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:40.879Z,1528887520.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:40.897Z,1528887520.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:41.259Z,1528887521.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:41.296Z,1528887521.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:41.659Z,1528887521.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:41.701Z,1528887521.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:42.059Z,1528887522.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:42.093Z,1528887522.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:42.460Z,1528887522.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:42.495Z,1528887522.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:42.855Z,1528887522.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:42.873Z,1528887522.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:43.269Z,1528887523.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:43.303Z,1528887523.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:43.673Z,1528887523.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:43.701Z,1528887523.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:44.073Z,1528887524.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:44.101Z,1528887524.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:44.459Z,1528887524.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:44.477Z,1528887524.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:44.863Z,1528887524.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:44.880Z,1528887524.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:45.263Z,1528887525.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:45.281Z,1528887525.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:45.662Z,1528887525.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:45.680Z,1528887525.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:46.073Z,1528887526.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:46.107Z,1528887526.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:46.473Z,1528887526.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:46.492Z,1528887526.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:46.869Z,1528887526.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:46.887Z,1528887526.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:47.258Z,1528887527.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:47.292Z,1528887527.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:47.662Z,1528887527.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:47.680Z,1528887527.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:48.063Z,1528887528.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:48.085Z,1528887528.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:48.466Z,1528887528.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:48.484Z,1528887528.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:48.861Z,1528887528.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:48.879Z,1528887528.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:49.271Z,1528887529.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:49.289Z,1528887529.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:49.673Z,1528887529.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:49.691Z,1528887529.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:50.071Z,1528887530.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:50.089Z,1528887530.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:50.463Z,1528887530.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:50.485Z,1528887530.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:50.863Z,1528887530.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:50.893Z,1528887530.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:51.262Z,1528887531.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:51.281Z,1528887531.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:51.665Z,1528887531.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:51.682Z,1528887531.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:52.074Z,1528887532.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:52.092Z,1528887532.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:52.474Z,1528887532.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:52.492Z,1528887532.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:52.871Z,1528887532.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:52.889Z,1528887532.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:53.265Z,1528887533.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:53.283Z,1528887533.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:53.662Z,1528887533.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:53.679Z,1528887533.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:54.066Z,1528887534.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:54.084Z,1528887534.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:54.463Z,1528887534.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:54.487Z,1528887534.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:54.862Z,1528887534.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:54.880Z,1528887534.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:55.274Z,1528887535.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:55.291Z,1528887535.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:55.674Z,1528887535.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:55.696Z,1528887535.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:56.075Z,1528887536.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:56.093Z,1528887536.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:56.463Z,1528887536.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:56.494Z,1528887536.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:56.865Z,1528887536.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:56.883Z,1528887536.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:57.262Z,1528887537.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:57.280Z,1528887537.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:57.669Z,1528887537.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:57.686Z,1528887537.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:58.074Z,1528887538.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:58.093Z,1528887538.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:58.475Z,1528887538.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:58.493Z,1528887538.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:58.878Z,1528887538.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:58.895Z,1528887538.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:58:59.269Z,1528887539.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:58:59.287Z,1528887539.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:02.375Z,1528887542.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:02.395Z,1528887542.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:02.531Z,1528887542.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:02.600Z,1528887542.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:02.945Z,1528887542.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:02.971Z,1528887542.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:03.345Z,1528887543.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:03.371Z,1528887543.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:03.737Z,1528887543.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:03.771Z,1528887543.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:04.126Z,1528887544.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:04.145Z,1528887544.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:04.527Z,1528887544.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:04.545Z,1528887544.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:04.932Z,1528887544.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:04.950Z,1528887544.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:05.334Z,1528887545.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:05.352Z,1528887545.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:05.733Z,1528887545.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:05.751Z,1528887545.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:06.134Z,1528887546.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:06.152Z,1528887546.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:06.529Z,1528887546.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:06.547Z,1528887546.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:06.927Z,1528887546.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:06.945Z,1528887546.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:07.332Z,1528887547.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:07.350Z,1528887547.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:07.727Z,1528887547.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:07.761Z,1528887547.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:08.135Z,1528887548.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:08.154Z,1528887548.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:08.541Z,1528887548.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:08.559Z,1528887548.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:08.934Z,1528887548.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:08.956Z,1528887548.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:09.327Z,1528887549.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:09.346Z,1528887549.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:09.727Z,1528887549.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:09.767Z,1528887549.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:10.124Z,1528887550.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:10.150Z,1528887550.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:10.524Z,1528887550.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:10.558Z,1528887550.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:10.928Z,1528887550.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:10.958Z,1528887550.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:11.339Z,1528887551.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:11.358Z,1528887551.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:11.740Z,1528887551.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:11.758Z,1528887551.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:12.139Z,1528887552.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:12.157Z,1528887552.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:12.529Z,1528887552.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:12.548Z,1528887552.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:12.930Z,1528887552.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:12.948Z,1528887552.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:13.327Z,1528887553.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:13.361Z,1528887553.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:13.730Z,1528887553.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:13.748Z,1528887553.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:14.143Z,1528887554.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:14.161Z,1528887554.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:14.543Z,1528887554.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:14.562Z,1528887554.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:14.935Z,1528887554.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:14.960Z,1528887554.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:15.319Z,1528887555.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:15.357Z,1528887555.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:15.723Z,1528887555.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:15.759Z,1528887555.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:16.118Z,1528887556.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:16.158Z,1528887556.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:16.520Z,1528887556.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:16.551Z,1528887556.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:16.923Z,1528887556.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:16.959Z,1528887556.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:17.329Z,1528887557.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:17.357Z,1528887557.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:17.744Z,1528887557.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:17.763Z,1528887557.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:18.143Z,1528887558.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:18.161Z,1528887558.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:18.519Z,1528887558.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:18.559Z,1528887558.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:18.919Z,1528887558.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:18.945Z,1528887558.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:19.323Z,1528887559.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:19.368Z,1528887559.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:19.722Z,1528887559.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:19.740Z,1528887559.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:20.133Z,1528887560.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:20.159Z,1528887560.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:20.542Z,1528887560.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:20.570Z,1528887560.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:20.937Z,1528887560.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:20.970Z,1528887560.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:21.327Z,1528887561.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:21.345Z,1528887561.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:21.726Z,1528887561.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:21.744Z,1528887561.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:22.126Z,1528887562.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:22.143Z,1528887562.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:22.526Z,1528887562.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:22.544Z,1528887562.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:22.926Z,1528887562.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:22.944Z,1528887562.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:23.334Z,1528887563.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:23.376Z,1528887563.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:23.737Z,1528887563.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:23.771Z,1528887563.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:24.138Z,1528887564.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:24.155Z,1528887564.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:24.527Z,1528887564.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:24.556Z,1528887564.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:24.928Z,1528887564.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:24.947Z,1528887564.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:25.328Z,1528887565.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:25.348Z,1528887565.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:25.724Z,1528887565.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:25.748Z,1528887565.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:26.133Z,1528887566.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:26.151Z,1528887566.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:26.538Z,1528887566.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:26.555Z,1528887566.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:26.933Z,1528887566.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:26.956Z,1528887566.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:27.328Z,1528887567.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:27.346Z,1528887567.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:27.722Z,1528887567.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:27.752Z,1528887567.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:28.130Z,1528887568.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:28.147Z,1528887568.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:28.530Z,1528887568.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:28.548Z,1528887568.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:28.922Z,1528887568.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:28.957Z,1528887568.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:29.334Z,1528887569.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:29.352Z,1528887569.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:29.737Z,1528887569.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:29.755Z,1528887569.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:30.135Z,1528887570.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:30.153Z,1528887570.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:30.528Z,1528887570.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:30.546Z,1528887570.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:30.931Z,1528887570.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:30.949Z,1528887570.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:31.330Z,1528887571.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:31.348Z,1528887571.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:31.727Z,1528887571.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:31.759Z,1528887571.759 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:31.759Z,1528887571.759 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 151
2018-06-13T10:59:31.759Z,1528887571.759 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T10:59:31.760Z,1528887571.760 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:31.761Z,1528887571.761 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 151
2018-06-13T10:59:31.761Z,1528887571.761 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T10:59:31.762Z,1528887571.762 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:31.763Z,1528887571.763 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 151
2018-06-13T10:59:31.763Z,1528887571.763 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T10:59:31.861Z,1528887571.861 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T10:59:31.861Z,1528887571.861 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T10:59:31.861Z,1528887571.861 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T10:59:32.139Z,1528887572.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:32.229Z,1528887572.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T10:59:32.229Z,1528887572.229 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 151
2018-06-13T10:59:32.230Z,1528887572.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T10:59:32.230Z,1528887572.230 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 151
2018-06-13T10:59:32.230Z,1528887572.230 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T10:59:32.231Z,1528887572.231 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 151
2018-06-13T10:59:32.538Z,1528887572.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:32.559Z,1528887572.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T10:59:32.559Z,1528887572.559 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:59:32.560Z,1528887572.560 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:59:32.560Z,1528887572.560 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T10:59:32.560Z,1528887572.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:59:32.561Z,1528887572.561 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:59:32.561Z,1528887572.561 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T10:59:32.562Z,1528887572.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T10:59:32.562Z,1528887572.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T10:59:32.939Z,1528887572.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:32.963Z,1528887572.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T10:59:32.964Z,1528887572.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:33.323Z,1528887573.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:33.351Z,1528887573.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T10:59:33.352Z,1528887573.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:33.723Z,1528887573.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:33.759Z,1528887573.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T10:59:33.760Z,1528887573.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:34.123Z,1528887574.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:34.160Z,1528887574.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T10:59:34.160Z,1528887574.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:34.524Z,1528887574.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:34.559Z,1528887574.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T10:59:34.560Z,1528887574.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:34.924Z,1528887574.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:34.955Z,1528887574.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T10:59:34.956Z,1528887574.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:35.335Z,1528887575.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:35.353Z,1528887575.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T10:59:35.354Z,1528887575.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:35.744Z,1528887575.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:35.768Z,1528887575.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T10:59:35.769Z,1528887575.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:36.140Z,1528887576.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:36.164Z,1528887576.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T10:59:36.165Z,1528887576.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:36.523Z,1528887576.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:36.551Z,1528887576.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T10:59:36.552Z,1528887576.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:36.923Z,1528887576.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:36.957Z,1528887576.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T10:59:36.958Z,1528887576.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:37.323Z,1528887577.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:37.359Z,1528887577.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T10:59:37.360Z,1528887577.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:37.723Z,1528887577.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:37.755Z,1528887577.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T10:59:37.756Z,1528887577.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:38.144Z,1528887578.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:38.162Z,1528887578.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T10:59:38.163Z,1528887578.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:38.540Z,1528887578.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:38.558Z,1528887578.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T10:59:38.559Z,1528887578.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:38.939Z,1528887578.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:38.958Z,1528887578.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T10:59:38.959Z,1528887578.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:39.319Z,1528887579.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:39.356Z,1528887579.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T10:59:39.361Z,1528887579.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:39.723Z,1528887579.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:39.761Z,1528887579.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T10:59:39.762Z,1528887579.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:40.123Z,1528887580.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:40.140Z,1528887580.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T10:59:40.168Z,1528887580.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:40.524Z,1528887580.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:40.564Z,1528887580.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T10:59:40.565Z,1528887580.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:40.923Z,1528887580.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:40.940Z,1528887580.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T10:59:40.957Z,1528887580.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:41.329Z,1528887581.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:41.363Z,1528887581.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T10:59:41.364Z,1528887581.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:41.742Z,1528887581.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:41.776Z,1528887581.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T10:59:41.777Z,1528887581.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:42.137Z,1528887582.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:42.171Z,1528887582.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T10:59:42.172Z,1528887582.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:42.527Z,1528887582.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:42.572Z,1528887582.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T10:59:42.573Z,1528887582.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:42.926Z,1528887582.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:42.944Z,1528887582.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T10:59:42.945Z,1528887582.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:43.327Z,1528887583.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:43.345Z,1528887583.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T10:59:43.346Z,1528887583.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:43.727Z,1528887583.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:43.746Z,1528887583.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T10:59:43.747Z,1528887583.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:44.137Z,1528887584.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:44.155Z,1528887584.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T10:59:44.156Z,1528887584.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:44.545Z,1528887584.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:44.581Z,1528887584.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T10:59:44.582Z,1528887584.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:44.934Z,1528887584.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:44.952Z,1528887584.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T10:59:44.952Z,1528887584.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:45.331Z,1528887585.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:45.349Z,1528887585.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T10:59:45.350Z,1528887585.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:45.727Z,1528887585.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:45.759Z,1528887585.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T10:59:45.760Z,1528887585.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:46.136Z,1528887586.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:46.154Z,1528887586.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T10:59:46.155Z,1528887586.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:46.541Z,1528887586.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:46.564Z,1528887586.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T10:59:46.581Z,1528887586.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:46.939Z,1528887586.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:46.956Z,1528887586.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T10:59:46.957Z,1528887586.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:47.324Z,1528887587.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:47.351Z,1528887587.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T10:59:47.352Z,1528887587.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:47.731Z,1528887587.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:47.749Z,1528887587.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T10:59:47.750Z,1528887587.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:48.139Z,1528887588.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:48.157Z,1528887588.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T10:59:48.158Z,1528887588.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:48.540Z,1528887588.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:48.564Z,1528887588.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T10:59:48.581Z,1528887588.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:48.940Z,1528887588.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:48.964Z,1528887588.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T10:59:48.965Z,1528887588.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:49.335Z,1528887589.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:49.354Z,1528887589.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T10:59:49.355Z,1528887589.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:49.728Z,1528887589.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:49.764Z,1528887589.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T10:59:49.769Z,1528887589.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:50.143Z,1528887590.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:50.162Z,1528887590.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T10:59:50.163Z,1528887590.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:50.542Z,1528887590.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:50.565Z,1528887590.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T10:59:50.566Z,1528887590.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:50.940Z,1528887590.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:50.964Z,1528887590.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T10:59:50.965Z,1528887590.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:51.320Z,1528887591.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:51.350Z,1528887591.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T10:59:51.351Z,1528887591.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:51.727Z,1528887591.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:51.750Z,1528887591.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T10:59:51.751Z,1528887591.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:52.139Z,1528887592.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:52.158Z,1528887592.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:52.539Z,1528887592.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:52.559Z,1528887592.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:52.939Z,1528887592.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:52.958Z,1528887592.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:53.323Z,1528887593.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:53.352Z,1528887593.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:53.719Z,1528887593.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:53.760Z,1528887593.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:54.139Z,1528887594.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:54.158Z,1528887594.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:54.537Z,1528887594.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:54.560Z,1528887594.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:54.940Z,1528887594.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:54.959Z,1528887594.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:55.323Z,1528887595.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:55.359Z,1528887595.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:55.723Z,1528887595.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:55.756Z,1528887595.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:56.141Z,1528887596.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:56.159Z,1528887596.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:56.543Z,1528887596.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:56.561Z,1528887596.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:56.937Z,1528887596.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:56.961Z,1528887596.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:57.323Z,1528887597.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:57.357Z,1528887597.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:57.727Z,1528887597.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:57.760Z,1528887597.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:58.144Z,1528887598.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:58.162Z,1528887598.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:58.543Z,1528887598.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:58.562Z,1528887598.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:58.948Z,1528887598.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:58.966Z,1528887598.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T10:59:59.327Z,1528887599.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T10:59:59.361Z,1528887599.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:02.444Z,1528887602.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:02.462Z,1528887602.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:02.585Z,1528887602.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:02.636Z,1528887602.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:02.995Z,1528887602.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:03.014Z,1528887603.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:03.384Z,1528887603.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:03.419Z,1528887603.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:03.771Z,1528887603.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:03.789Z,1528887603.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:04.175Z,1528887604.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:04.202Z,1528887604.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:04.572Z,1528887604.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:04.590Z,1528887604.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:04.975Z,1528887604.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:05.016Z,1528887605.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:05.385Z,1528887605.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:05.420Z,1528887605.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:05.781Z,1528887605.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:05.800Z,1528887605.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:06.186Z,1528887606.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:06.221Z,1528887606.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:06.576Z,1528887606.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:06.594Z,1528887606.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:06.977Z,1528887606.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:06.995Z,1528887606.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:07.376Z,1528887607.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:07.398Z,1528887607.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:07.776Z,1528887607.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:07.794Z,1528887607.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:08.181Z,1528887608.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:08.200Z,1528887608.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:08.585Z,1528887608.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:08.604Z,1528887608.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:08.982Z,1528887608.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:09.001Z,1528887609.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:09.374Z,1528887609.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:09.396Z,1528887609.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:09.776Z,1528887609.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:09.794Z,1528887609.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:10.176Z,1528887610.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:10.195Z,1528887610.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:10.577Z,1528887610.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:10.595Z,1528887610.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:10.976Z,1528887610.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:10.994Z,1528887610.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:11.386Z,1528887611.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:11.429Z,1528887611.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:11.785Z,1528887611.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:11.804Z,1528887611.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:12.182Z,1528887612.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:12.200Z,1528887612.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:12.576Z,1528887612.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:12.595Z,1528887612.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:12.974Z,1528887612.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:12.992Z,1528887612.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:13.376Z,1528887613.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:13.394Z,1528887613.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:13.776Z,1528887613.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:13.804Z,1528887613.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:14.181Z,1528887614.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:14.200Z,1528887614.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:14.585Z,1528887614.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:14.604Z,1528887614.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:14.982Z,1528887614.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:15.000Z,1528887615.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:15.374Z,1528887615.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:15.392Z,1528887615.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:15.776Z,1528887615.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:15.794Z,1528887615.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:16.181Z,1528887616.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:16.200Z,1528887616.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:16.581Z,1528887616.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:16.600Z,1528887616.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:16.982Z,1528887616.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:16.000Z,1528887617.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:17.372Z,1528887617.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:17.409Z,1528887617.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:17.767Z,1528887617.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:17.813Z,1528887617.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:18.181Z,1528887618.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:18.210Z,1528887618.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:18.594Z,1528887618.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:18.613Z,1528887618.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:18.980Z,1528887618.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:19.009Z,1528887619.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:19.372Z,1528887619.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:19.406Z,1528887619.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:19.771Z,1528887619.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:19.801Z,1528887619.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:20.181Z,1528887620.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:20.222Z,1528887620.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:20.585Z,1528887620.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:20.614Z,1528887620.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:20.981Z,1528887620.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:21.018Z,1528887621.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:21.376Z,1528887621.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:21.410Z,1528887621.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:21.773Z,1528887621.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:21.791Z,1528887621.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:22.185Z,1528887622.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:22.220Z,1528887622.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:22.586Z,1528887622.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:22.604Z,1528887622.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:22.982Z,1528887622.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:23.000Z,1528887623.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:23.376Z,1528887623.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:23.403Z,1528887623.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:23.774Z,1528887623.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:23.792Z,1528887623.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:24.181Z,1528887624.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:24.200Z,1528887624.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:24.585Z,1528887624.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:24.605Z,1528887624.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:24.981Z,1528887624.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:24.000Z,1528887625.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:25.376Z,1528887625.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:25.408Z,1528887625.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:25.776Z,1528887625.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:25.795Z,1528887625.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:26.181Z,1528887626.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:26.200Z,1528887626.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:26.585Z,1528887626.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:26.604Z,1528887626.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:26.982Z,1528887626.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:27.000Z,1528887627.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:27.375Z,1528887627.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:27.394Z,1528887627.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:27.776Z,1528887627.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:27.813Z,1528887627.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:28.183Z,1528887628.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:28.205Z,1528887628.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:28.584Z,1528887628.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:28.603Z,1528887628.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:28.990Z,1528887628.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:29.008Z,1528887629.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:29.378Z,1528887629.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:29.398Z,1528887629.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:29.775Z,1528887629.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:29.794Z,1528887629.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:30.187Z,1528887630.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:30.206Z,1528887630.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:30.587Z,1528887630.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:30.612Z,1528887630.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:30.989Z,1528887630.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:31.008Z,1528887631.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:31.382Z,1528887631.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:31.402Z,1528887631.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:31.773Z,1528887631.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:31.800Z,1528887631.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:32.189Z,1528887632.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:32.209Z,1528887632.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:32.590Z,1528887632.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:32.609Z,1528887632.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:32.986Z,1528887632.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:33.018Z,1528887633.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:33.371Z,1528887633.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:33.410Z,1528887633.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:33.771Z,1528887633.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:33.812Z,1528887633.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:34.188Z,1528887634.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:34.209Z,1528887634.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:34.590Z,1528887634.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:34.608Z,1528887634.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:34.992Z,1528887634.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:35.011Z,1528887635.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:35.372Z,1528887635.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:35.401Z,1528887635.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:35.771Z,1528887635.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:35.800Z,1528887635.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:36.188Z,1528887636.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:36.207Z,1528887636.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:36.591Z,1528887636.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:36.611Z,1528887636.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:36.989Z,1528887636.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:37.009Z,1528887637.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:37.372Z,1528887637.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:37.408Z,1528887637.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:37.771Z,1528887637.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:37.814Z,1528887637.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:38.192Z,1528887638.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:38.211Z,1528887638.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:38.591Z,1528887638.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:38.610Z,1528887638.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:38.987Z,1528887638.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:39.007Z,1528887639.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:39.368Z,1528887639.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:39.406Z,1528887639.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:39.775Z,1528887639.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:39.803Z,1528887639.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:40.187Z,1528887640.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:40.211Z,1528887640.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:40.581Z,1528887640.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:40.618Z,1528887640.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:40.991Z,1528887640.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:41.010Z,1528887641.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:41.376Z,1528887641.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:41.404Z,1528887641.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:41.772Z,1528887641.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:41.804Z,1528887641.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:42.187Z,1528887642.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:42.206Z,1528887642.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:42.590Z,1528887642.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:42.620Z,1528887642.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:42.992Z,1528887642.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:43.011Z,1528887643.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:43.372Z,1528887643.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:43.402Z,1528887643.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:43.771Z,1528887643.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:43.806Z,1528887643.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:44.185Z,1528887644.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:44.215Z,1528887644.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:44.585Z,1528887644.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:44.613Z,1528887644.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:44.981Z,1528887644.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:45.020Z,1528887645.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:45.374Z,1528887645.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:45.392Z,1528887645.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:45.774Z,1528887645.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:45.792Z,1528887645.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:46.185Z,1528887646.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:46.216Z,1528887646.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:46.585Z,1528887646.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:46.620Z,1528887646.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:46.985Z,1528887646.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:47.004Z,1528887647.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:47.378Z,1528887647.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:47.396Z,1528887647.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:47.774Z,1528887647.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:47.792Z,1528887647.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:48.181Z,1528887648.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:48.201Z,1528887648.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:48.586Z,1528887648.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:48.621Z,1528887648.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:48.981Z,1528887648.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:48.000Z,1528887649.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:49.376Z,1528887649.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:49.407Z,1528887649.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:49.776Z,1528887649.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:49.794Z,1528887649.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:50.181Z,1528887650.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:50.200Z,1528887650.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:50.585Z,1528887650.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:50.604Z,1528887650.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:50.982Z,1528887650.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:51.000Z,1528887651.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:51.378Z,1528887651.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:51.422Z,1528887651.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:51.770Z,1528887651.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:51.800Z,1528887651.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:52.187Z,1528887652.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:52.206Z,1528887652.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:52.591Z,1528887652.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:52.610Z,1528887652.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:52.982Z,1528887652.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:53.012Z,1528887653.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:53.371Z,1528887653.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:53.412Z,1528887653.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:53.767Z,1528887653.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:53.810Z,1528887653.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:54.187Z,1528887654.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:54.206Z,1528887654.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:54.591Z,1528887654.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:54.610Z,1528887654.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:54.987Z,1528887654.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:55.006Z,1528887655.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:55.371Z,1528887655.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:55.408Z,1528887655.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:55.772Z,1528887655.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:55.800Z,1528887655.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:56.175Z,1528887656.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:56.204Z,1528887656.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:56.587Z,1528887656.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:56.606Z,1528887656.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:56.991Z,1528887656.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:57.010Z,1528887657.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:57.387Z,1528887657.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:57.410Z,1528887657.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:57.775Z,1528887657.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:57.803Z,1528887657.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:58.176Z,1528887658.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:58.205Z,1528887658.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:58.572Z,1528887658.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:58.610Z,1528887658.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:58.971Z,1528887658.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:59.009Z,1528887659.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:00:59.396Z,1528887659.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:00:59.414Z,1528887659.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:02.500Z,1528887662.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:02.519Z,1528887662.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:02.523Z,1528887662.523 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T10:56:01.0Z
2018-06-13T11:01:02.523Z,1528887662.523 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T11:01:02.523Z,1528887662.523 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T11:01:02.634Z,1528887662.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:02.679Z,1528887662.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:03.805Z,1528887663.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:03.823Z,1528887663.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:03.924Z,1528887663.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:03.973Z,1528887663.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:04.337Z,1528887664.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:04.369Z,1528887664.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:04.752Z,1528887664.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:04.771Z,1528887664.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:05.137Z,1528887665.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:05.171Z,1528887665.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:05.531Z,1528887665.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:05.563Z,1528887665.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:05.931Z,1528887665.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:05.964Z,1528887665.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:09.047Z,1528887669.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:09.066Z,1528887669.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:09.157Z,1528887669.157 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0176.lzma
2018-06-13T11:01:09.178Z,1528887669.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:09.227Z,1528887669.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:09.601Z,1528887669.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:09.619Z,1528887669.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:09.958Z,1528887669.958 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0176.lzma.bak
2018-06-13T11:01:09.958Z,1528887669.958 [DataOverHttps](INFO): SBD MOMSN=8329102
2018-06-13T11:01:10.012Z,1528887670.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:10.031Z,1528887670.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:11.911Z,1528887671.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:11.928Z,1528887671.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:12.026Z,1528887672.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:12.077Z,1528887672.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:12.432Z,1528887672.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:12.463Z,1528887672.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:15.566Z,1528887675.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:15.585Z,1528887675.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:15.737Z,1528887675.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:15.772Z,1528887675.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:16.152Z,1528887676.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:16.170Z,1528887676.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:16.552Z,1528887676.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:16.570Z,1528887676.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:16.931Z,1528887676.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:16.967Z,1528887676.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:17.331Z,1528887677.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:17.367Z,1528887677.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:17.732Z,1528887677.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:17.766Z,1528887677.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:18.131Z,1528887678.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:18.165Z,1528887678.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:18.541Z,1528887678.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:18.575Z,1528887678.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:21.660Z,1528887681.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:21.683Z,1528887681.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:21.765Z,1528887681.765 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0177.lzma
2018-06-13T11:01:21.809Z,1528887681.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:21.844Z,1528887681.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:22.191Z,1528887682.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:22.232Z,1528887682.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:22.566Z,1528887682.566 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0177.lzma.bak
2018-06-13T11:01:22.566Z,1528887682.566 [DataOverHttps](INFO): SBD MOMSN=8329104
2018-06-13T11:01:22.592Z,1528887682.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:22.643Z,1528887682.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:24.474Z,1528887684.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:24.497Z,1528887684.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:24.500Z,1528887684.500 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T11:01:24.500Z,1528887684.500 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T11:01:24.500Z,1528887684.500 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T11:01:24.631Z,1528887684.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:24.671Z,1528887684.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:25.037Z,1528887685.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:25.072Z,1528887685.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:28.145Z,1528887688.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:28.180Z,1528887688.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:28.286Z,1528887688.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:28.331Z,1528887688.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:28.692Z,1528887688.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:28.727Z,1528887688.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:29.092Z,1528887689.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:29.126Z,1528887689.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:29.490Z,1528887689.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:29.508Z,1528887689.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:29.892Z,1528887689.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:29.928Z,1528887689.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:30.297Z,1528887690.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:30.315Z,1528887690.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:30.706Z,1528887690.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:30.744Z,1528887690.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:31.105Z,1528887691.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:31.123Z,1528887691.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:31.495Z,1528887691.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:31.524Z,1528887691.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:31.892Z,1528887691.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:31.947Z,1528887691.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:32.295Z,1528887692.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:32.412Z,1528887692.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:32.694Z,1528887692.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:32.791Z,1528887692.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:33.094Z,1528887693.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:33.214Z,1528887693.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:33.502Z,1528887693.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:33.622Z,1528887693.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:33.901Z,1528887693.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:33.919Z,1528887693.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:34.299Z,1528887694.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:34.404Z,1528887694.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:34.698Z,1528887694.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:34.716Z,1528887694.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:35.093Z,1528887695.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:35.111Z,1528887695.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:35.498Z,1528887695.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:35.515Z,1528887695.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:35.896Z,1528887695.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:35.927Z,1528887695.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:36.305Z,1528887696.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:36.323Z,1528887696.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:36.705Z,1528887696.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:36.723Z,1528887696.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:37.105Z,1528887697.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:37.123Z,1528887697.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:37.494Z,1528887697.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:37.512Z,1528887697.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:37.896Z,1528887697.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:37.920Z,1528887697.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:38.306Z,1528887698.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:38.324Z,1528887698.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:38.705Z,1528887698.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:38.723Z,1528887698.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:39.105Z,1528887699.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:39.124Z,1528887699.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:39.496Z,1528887699.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:39.530Z,1528887699.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:39.891Z,1528887699.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:39.914Z,1528887699.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:40.305Z,1528887700.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:40.323Z,1528887700.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:40.705Z,1528887700.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:40.723Z,1528887700.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:41.106Z,1528887701.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:41.123Z,1528887701.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:41.490Z,1528887701.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:41.520Z,1528887701.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:41.895Z,1528887701.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:41.920Z,1528887701.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:42.302Z,1528887702.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:42.328Z,1528887702.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:42.709Z,1528887702.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:42.727Z,1528887702.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:43.111Z,1528887703.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:43.129Z,1528887703.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:43.498Z,1528887703.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:43.515Z,1528887703.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:43.895Z,1528887703.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:43.918Z,1528887703.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:44.312Z,1528887704.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:44.330Z,1528887704.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:44.707Z,1528887704.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:44.725Z,1528887704.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:45.111Z,1528887705.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:45.129Z,1528887705.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:45.498Z,1528887705.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:45.516Z,1528887705.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:45.897Z,1528887705.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:45.915Z,1528887705.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:46.303Z,1528887706.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:46.322Z,1528887706.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:46.711Z,1528887706.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:46.729Z,1528887706.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:47.103Z,1528887707.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:47.121Z,1528887707.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:47.495Z,1528887707.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:47.519Z,1528887707.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:47.895Z,1528887707.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:47.930Z,1528887707.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:48.311Z,1528887708.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:48.329Z,1528887708.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:48.711Z,1528887708.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:48.729Z,1528887708.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:49.110Z,1528887709.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:49.144Z,1528887709.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:49.488Z,1528887709.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:49.522Z,1528887709.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:49.891Z,1528887709.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:49.925Z,1528887709.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:50.305Z,1528887710.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:50.334Z,1528887710.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:50.705Z,1528887710.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:50.732Z,1528887710.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:51.106Z,1528887711.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:51.134Z,1528887711.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:51.492Z,1528887711.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:51.510Z,1528887711.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:51.891Z,1528887711.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:51.909Z,1528887711.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:52.309Z,1528887712.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:52.336Z,1528887712.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:52.709Z,1528887712.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:52.738Z,1528887712.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:53.109Z,1528887713.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:53.138Z,1528887713.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:53.495Z,1528887713.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:53.513Z,1528887713.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:53.895Z,1528887713.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:53.914Z,1528887713.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:54.301Z,1528887714.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:54.319Z,1528887714.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:54.709Z,1528887714.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:54.743Z,1528887714.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:55.105Z,1528887715.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:55.123Z,1528887715.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:55.497Z,1528887715.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:55.516Z,1528887715.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:55.897Z,1528887715.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:55.915Z,1528887715.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:56.305Z,1528887716.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:56.324Z,1528887716.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:56.701Z,1528887716.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:56.719Z,1528887716.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:57.102Z,1528887717.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:57.120Z,1528887717.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:57.492Z,1528887717.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:57.538Z,1528887717.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:57.898Z,1528887717.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:57.917Z,1528887717.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:58.304Z,1528887718.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:58.322Z,1528887718.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:58.709Z,1528887718.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:58.727Z,1528887718.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:59.104Z,1528887719.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:59.122Z,1528887719.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:59.499Z,1528887719.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:59.517Z,1528887719.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:01:59.899Z,1528887719.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:01:59.917Z,1528887719.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:00.303Z,1528887720.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:00.321Z,1528887720.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:00.709Z,1528887720.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:00.727Z,1528887720.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:01.106Z,1528887721.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:01.124Z,1528887721.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:01.492Z,1528887721.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:01.518Z,1528887721.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:01.895Z,1528887721.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:01.929Z,1528887721.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:02.304Z,1528887722.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:02.323Z,1528887722.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:02.701Z,1528887722.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:02.724Z,1528887722.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:03.103Z,1528887723.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:03.121Z,1528887723.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:03.500Z,1528887723.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:03.518Z,1528887723.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:03.891Z,1528887723.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:03.915Z,1528887723.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:04.302Z,1528887724.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:04.321Z,1528887724.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:04.702Z,1528887724.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:04.729Z,1528887724.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:05.103Z,1528887725.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:05.121Z,1528887725.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:05.496Z,1528887725.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:05.527Z,1528887725.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:05.897Z,1528887725.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:05.915Z,1528887725.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:06.303Z,1528887726.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:06.321Z,1528887726.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:06.710Z,1528887726.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:06.727Z,1528887726.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:07.108Z,1528887727.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:07.125Z,1528887727.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:07.499Z,1528887727.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:07.524Z,1528887727.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:07.895Z,1528887727.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:07.929Z,1528887727.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:08.309Z,1528887728.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:08.327Z,1528887728.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:08.705Z,1528887728.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:08.728Z,1528887728.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:09.107Z,1528887729.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:09.125Z,1528887729.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:09.491Z,1528887729.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:09.532Z,1528887729.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:09.887Z,1528887729.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:09.920Z,1528887729.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:10.312Z,1528887730.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:10.330Z,1528887730.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:10.701Z,1528887730.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:10.729Z,1528887730.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:11.097Z,1528887731.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:11.133Z,1528887731.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:11.492Z,1528887731.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:11.529Z,1528887731.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:11.887Z,1528887731.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:11.905Z,1528887731.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:12.302Z,1528887732.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:12.330Z,1528887732.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:12.705Z,1528887732.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:12.740Z,1528887732.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:13.101Z,1528887733.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:13.129Z,1528887733.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:13.487Z,1528887733.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:13.528Z,1528887733.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:13.892Z,1528887733.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:13.910Z,1528887733.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:14.294Z,1528887734.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:14.312Z,1528887734.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:14.701Z,1528887734.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:14.734Z,1528887734.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:15.108Z,1528887735.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:15.134Z,1528887735.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:15.504Z,1528887735.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:15.534Z,1528887735.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:15.892Z,1528887735.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:15.910Z,1528887735.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:16.294Z,1528887736.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:16.312Z,1528887736.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:16.690Z,1528887736.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:16.708Z,1528887736.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:17.095Z,1528887737.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:17.160Z,1528887737.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:17.506Z,1528887737.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:17.531Z,1528887737.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:17.905Z,1528887737.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:17.936Z,1528887737.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:18.305Z,1528887738.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:18.331Z,1528887738.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:18.693Z,1528887738.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:18.711Z,1528887738.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:19.095Z,1528887739.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:19.113Z,1528887739.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:19.495Z,1528887739.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:19.513Z,1528887739.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:19.895Z,1528887739.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:19.912Z,1528887739.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:20.294Z,1528887740.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:20.311Z,1528887740.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:20.705Z,1528887740.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:20.738Z,1528887740.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:21.105Z,1528887741.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:21.139Z,1528887741.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:21.505Z,1528887741.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:21.539Z,1528887741.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:21.895Z,1528887741.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:21.913Z,1528887741.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:22.294Z,1528887742.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:22.312Z,1528887742.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:22.695Z,1528887742.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:22.712Z,1528887742.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:23.094Z,1528887743.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:23.112Z,1528887743.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:23.505Z,1528887743.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:23.538Z,1528887743.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:23.905Z,1528887743.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:23.939Z,1528887743.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:24.305Z,1528887744.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:24.338Z,1528887744.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:24.695Z,1528887744.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:24.713Z,1528887744.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:25.095Z,1528887745.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:25.131Z,1528887745.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:25.498Z,1528887745.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:25.516Z,1528887745.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:25.898Z,1528887745.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:25.916Z,1528887745.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:26.298Z,1528887746.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:26.315Z,1528887746.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:29.417Z,1528887749.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:29.453Z,1528887749.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:29.584Z,1528887749.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:29.620Z,1528887749.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:29.970Z,1528887749.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:30.013Z,1528887750.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:30.359Z,1528887750.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:30.398Z,1528887750.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:30.756Z,1528887750.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:30.774Z,1528887750.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:31.153Z,1528887751.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:31.176Z,1528887751.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:31.569Z,1528887751.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:31.606Z,1528887751.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:31.970Z,1528887751.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:32.000Z,1528887752.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:32.369Z,1528887752.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:32.403Z,1528887752.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:32.758Z,1528887752.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:32.776Z,1528887752.776 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:32.776Z,1528887752.776 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 152
2018-06-13T11:02:32.776Z,1528887752.776 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:02:32.778Z,1528887752.778 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:32.778Z,1528887752.778 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 152
2018-06-13T11:02:32.778Z,1528887752.778 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:02:32.780Z,1528887752.780 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:32.780Z,1528887752.780 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 152
2018-06-13T11:02:32.780Z,1528887752.780 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:02:32.869Z,1528887752.869 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:02:32.869Z,1528887752.869 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:02:32.870Z,1528887752.870 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:02:33.158Z,1528887753.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:33.265Z,1528887753.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:02:33.265Z,1528887753.265 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 152
2018-06-13T11:02:33.266Z,1528887753.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:02:33.266Z,1528887753.266 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 152
2018-06-13T11:02:33.266Z,1528887753.266 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:02:33.266Z,1528887753.266 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 152
2018-06-13T11:02:33.557Z,1528887753.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:33.579Z,1528887753.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:02:33.579Z,1528887753.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:02:33.579Z,1528887753.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:02:33.580Z,1528887753.580 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:02:33.580Z,1528887753.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:02:33.580Z,1528887753.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:02:33.581Z,1528887753.581 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:02:33.581Z,1528887753.581 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:02:33.582Z,1528887753.582 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:02:33.954Z,1528887753.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:33.987Z,1528887753.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:02:33.988Z,1528887753.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:34.370Z,1528887754.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:34.387Z,1528887754.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:02:34.388Z,1528887754.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:34.771Z,1528887754.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:34.788Z,1528887754.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:02:34.789Z,1528887754.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:35.170Z,1528887755.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:35.188Z,1528887755.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:02:35.189Z,1528887755.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:35.559Z,1528887755.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:35.582Z,1528887755.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:02:35.583Z,1528887755.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:35.957Z,1528887755.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:35.975Z,1528887755.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:02:35.976Z,1528887755.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:36.370Z,1528887756.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:36.388Z,1528887756.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:02:36.389Z,1528887756.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:36.771Z,1528887756.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:36.796Z,1528887756.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:02:36.796Z,1528887756.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:37.170Z,1528887757.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:37.188Z,1528887757.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:02:37.189Z,1528887757.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:37.562Z,1528887757.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:37.584Z,1528887757.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:02:37.585Z,1528887757.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:37.958Z,1528887757.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:37.981Z,1528887757.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:02:37.982Z,1528887757.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:38.375Z,1528887758.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:38.393Z,1528887758.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:02:38.394Z,1528887758.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:38.774Z,1528887758.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:38.793Z,1528887758.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:02:38.794Z,1528887758.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:39.171Z,1528887759.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:39.188Z,1528887759.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:02:39.190Z,1528887759.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:39.560Z,1528887759.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:39.592Z,1528887759.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:02:39.593Z,1528887759.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:39.961Z,1528887759.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:39.978Z,1528887759.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:02:39.979Z,1528887759.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:40.371Z,1528887760.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:40.389Z,1528887760.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:02:40.390Z,1528887760.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:40.775Z,1528887760.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:40.793Z,1528887760.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:02:40.794Z,1528887760.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:41.171Z,1528887761.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:41.189Z,1528887761.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:02:41.190Z,1528887761.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:41.559Z,1528887761.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:41.584Z,1528887761.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:02:41.585Z,1528887761.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:41.959Z,1528887761.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:41.983Z,1528887761.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:02:41.984Z,1528887761.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:42.372Z,1528887762.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:42.389Z,1528887762.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:02:42.390Z,1528887762.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:42.775Z,1528887762.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:42.792Z,1528887762.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:02:42.793Z,1528887762.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:43.176Z,1528887763.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:43.200Z,1528887763.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:02:43.201Z,1528887763.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:43.556Z,1528887763.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:43.584Z,1528887763.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:02:43.586Z,1528887763.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:43.955Z,1528887763.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:43.983Z,1528887763.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:02:43.984Z,1528887763.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:44.381Z,1528887764.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:44.399Z,1528887764.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:02:44.400Z,1528887764.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:44.775Z,1528887764.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:44.792Z,1528887764.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:02:44.793Z,1528887764.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:45.172Z,1528887765.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:45.190Z,1528887765.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:02:45.191Z,1528887765.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:45.566Z,1528887765.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:45.589Z,1528887765.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:02:45.590Z,1528887765.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:45.951Z,1528887765.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:45.989Z,1528887765.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:02:45.990Z,1528887765.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:46.370Z,1528887766.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:46.400Z,1528887766.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:02:46.405Z,1528887766.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:46.777Z,1528887766.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:46.800Z,1528887766.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:02:46.801Z,1528887766.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:47.162Z,1528887767.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:47.190Z,1528887767.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:02:47.191Z,1528887767.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:47.556Z,1528887767.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:47.590Z,1528887767.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:02:47.591Z,1528887767.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:47.955Z,1528887767.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:47.996Z,1528887767.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:02:47.997Z,1528887767.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:48.366Z,1528887768.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:48.405Z,1528887768.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:02:48.406Z,1528887768.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:48.770Z,1528887768.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:48.813Z,1528887768.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:02:48.814Z,1528887768.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:49.170Z,1528887769.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:49.199Z,1528887769.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:02:49.200Z,1528887769.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:49.551Z,1528887769.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:49.588Z,1528887769.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:02:49.593Z,1528887769.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:49.955Z,1528887769.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:49.996Z,1528887769.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:02:50.001Z,1528887770.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:50.373Z,1528887770.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:50.403Z,1528887770.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:02:50.404Z,1528887770.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:50.765Z,1528887770.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:50.799Z,1528887770.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:02:50.800Z,1528887770.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:51.170Z,1528887771.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:51.207Z,1528887771.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:02:51.208Z,1528887771.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:51.557Z,1528887771.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:51.580Z,1528887771.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:02:51.581Z,1528887771.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:51.956Z,1528887771.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:51.974Z,1528887771.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:02:51.975Z,1528887771.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:52.369Z,1528887772.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:52.387Z,1528887772.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:02:52.388Z,1528887772.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:52.769Z,1528887772.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:52.787Z,1528887772.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:53.162Z,1528887773.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:53.188Z,1528887773.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:53.560Z,1528887773.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:53.578Z,1528887773.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:53.960Z,1528887773.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:53.990Z,1528887773.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:54.357Z,1528887774.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:54.375Z,1528887774.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:54.766Z,1528887774.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:54.788Z,1528887774.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:55.169Z,1528887775.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:55.187Z,1528887775.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:55.566Z,1528887775.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:55.588Z,1528887775.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:55.962Z,1528887775.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:55.980Z,1528887775.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:56.362Z,1528887776.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:56.380Z,1528887776.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:56.763Z,1528887776.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:56.781Z,1528887776.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:57.161Z,1528887777.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:57.179Z,1528887777.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:57.569Z,1528887777.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:57.588Z,1528887777.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:57.970Z,1528887777.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:57.988Z,1528887777.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:58.369Z,1528887778.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:58.387Z,1528887778.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:58.762Z,1528887778.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:58.780Z,1528887778.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:59.157Z,1528887779.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:59.175Z,1528887779.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:59.561Z,1528887779.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:59.579Z,1528887779.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:02:59.962Z,1528887779.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:02:59.985Z,1528887779.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:00.357Z,1528887780.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:00.375Z,1528887780.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:00.769Z,1528887780.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:00.787Z,1528887780.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:01.169Z,1528887781.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:01.187Z,1528887781.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:01.566Z,1528887781.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:01.584Z,1528887781.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:01.961Z,1528887781.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:01.979Z,1528887781.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:02.357Z,1528887782.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:02.380Z,1528887782.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:02.763Z,1528887782.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:02.781Z,1528887782.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:03.161Z,1528887783.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:03.179Z,1528887783.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:03.567Z,1528887783.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:03.585Z,1528887783.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:03.966Z,1528887783.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:03.988Z,1528887783.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:04.366Z,1528887784.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:04.388Z,1528887784.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:04.762Z,1528887784.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:04.781Z,1528887784.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:05.155Z,1528887785.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:05.178Z,1528887785.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:05.564Z,1528887785.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:05.582Z,1528887785.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:05.963Z,1528887785.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:05.981Z,1528887785.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:06.361Z,1528887786.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:06.379Z,1528887786.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:06.766Z,1528887786.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:06.788Z,1528887786.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:07.169Z,1528887787.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:07.187Z,1528887787.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:07.566Z,1528887787.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:07.584Z,1528887787.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:07.959Z,1528887787.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:07.981Z,1528887787.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:08.359Z,1528887788.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:08.396Z,1528887788.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:08.755Z,1528887788.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:08.779Z,1528887788.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:09.161Z,1528887789.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:09.179Z,1528887789.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:09.571Z,1528887789.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:09.590Z,1528887789.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:09.970Z,1528887789.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:09.992Z,1528887789.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:10.370Z,1528887790.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:10.388Z,1528887790.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:10.762Z,1528887790.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:10.780Z,1528887790.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:11.155Z,1528887791.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:11.178Z,1528887791.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:11.561Z,1528887791.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:11.579Z,1528887791.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:11.962Z,1528887791.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:11.980Z,1528887791.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:12.362Z,1528887792.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:12.380Z,1528887792.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:12.770Z,1528887792.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:12.795Z,1528887792.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:13.171Z,1528887793.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:13.189Z,1528887793.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:13.567Z,1528887793.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:13.585Z,1528887793.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:13.961Z,1528887793.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:13.979Z,1528887793.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:14.362Z,1528887794.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:14.381Z,1528887794.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:14.762Z,1528887794.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:14.779Z,1528887794.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:15.161Z,1528887795.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:15.179Z,1528887795.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:15.570Z,1528887795.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:15.589Z,1528887795.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:15.970Z,1528887795.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:15.987Z,1528887795.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:16.370Z,1528887796.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:16.389Z,1528887796.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:16.762Z,1528887796.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:16.780Z,1528887796.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:17.158Z,1528887797.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:17.176Z,1528887797.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:17.561Z,1528887797.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:17.579Z,1528887797.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:17.963Z,1528887797.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:17.981Z,1528887797.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:18.355Z,1528887798.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:18.378Z,1528887798.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:18.770Z,1528887798.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:18.788Z,1528887798.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:19.171Z,1528887799.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:19.189Z,1528887799.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:19.571Z,1528887799.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:19.588Z,1528887799.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:19.961Z,1528887799.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:19.979Z,1528887799.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:20.362Z,1528887800.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:20.380Z,1528887800.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:20.755Z,1528887800.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:20.779Z,1528887800.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:21.162Z,1528887801.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:21.180Z,1528887801.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:21.571Z,1528887801.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:21.590Z,1528887801.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:21.972Z,1528887801.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:21.990Z,1528887801.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:22.370Z,1528887802.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:22.388Z,1528887802.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:22.763Z,1528887802.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:22.781Z,1528887802.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:23.155Z,1528887803.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:23.181Z,1528887803.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:23.554Z,1528887803.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:23.588Z,1528887803.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:23.957Z,1528887803.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:23.995Z,1528887803.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:24.363Z,1528887804.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:24.382Z,1528887804.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:24.775Z,1528887804.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:24.793Z,1528887804.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:25.176Z,1528887805.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:25.194Z,1528887805.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:28.277Z,1528887808.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:28.323Z,1528887808.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:28.443Z,1528887808.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:28.480Z,1528887808.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:28.844Z,1528887808.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:28.877Z,1528887808.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:29.243Z,1528887809.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:29.274Z,1528887809.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:29.649Z,1528887809.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:29.684Z,1528887809.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:30.049Z,1528887810.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:30.088Z,1528887810.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:30.453Z,1528887810.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:30.481Z,1528887810.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:30.839Z,1528887810.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:30.865Z,1528887810.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:31.240Z,1528887811.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:31.258Z,1528887811.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:31.640Z,1528887811.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:31.658Z,1528887811.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:32.040Z,1528887812.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:32.075Z,1528887812.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:32.450Z,1528887812.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:32.468Z,1528887812.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:32.858Z,1528887812.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:32.895Z,1528887812.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:33.254Z,1528887813.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:33.272Z,1528887813.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:33.646Z,1528887813.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:33.665Z,1528887813.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:34.040Z,1528887814.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:34.075Z,1528887814.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:34.450Z,1528887814.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:34.469Z,1528887814.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:34.854Z,1528887814.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:34.873Z,1528887814.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:35.246Z,1528887815.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:35.273Z,1528887815.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:35.644Z,1528887815.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:35.675Z,1528887815.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:36.045Z,1528887816.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:36.064Z,1528887816.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:36.450Z,1528887816.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:36.468Z,1528887816.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:36.853Z,1528887816.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:36.872Z,1528887816.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:37.253Z,1528887817.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:37.272Z,1528887817.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:37.642Z,1528887817.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:37.660Z,1528887817.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:38.043Z,1528887818.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:38.076Z,1528887818.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:38.455Z,1528887818.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:38.480Z,1528887818.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:38.855Z,1528887818.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:38.872Z,1528887818.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:39.254Z,1528887819.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:39.271Z,1528887819.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:39.643Z,1528887819.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:39.669Z,1528887819.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:40.039Z,1528887820.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:40.062Z,1528887820.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:40.454Z,1528887820.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:40.472Z,1528887820.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:40.854Z,1528887820.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:40.880Z,1528887820.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:41.254Z,1528887821.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:41.276Z,1528887821.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:41.650Z,1528887821.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:41.668Z,1528887821.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:42.043Z,1528887822.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:42.068Z,1528887822.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:42.454Z,1528887822.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:42.472Z,1528887822.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:42.854Z,1528887822.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:42.877Z,1528887822.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:43.255Z,1528887823.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:43.273Z,1528887823.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:43.646Z,1528887823.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:43.668Z,1528887823.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:44.043Z,1528887824.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:44.066Z,1528887824.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:44.455Z,1528887824.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:44.480Z,1528887824.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:44.854Z,1528887824.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:44.871Z,1528887824.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:45.254Z,1528887825.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:45.271Z,1528887825.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:45.646Z,1528887825.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:45.665Z,1528887825.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:46.045Z,1528887826.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:46.063Z,1528887826.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:46.454Z,1528887826.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:46.472Z,1528887826.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:46.854Z,1528887826.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:46.873Z,1528887826.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:47.254Z,1528887827.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:47.272Z,1528887827.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:47.649Z,1528887827.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:47.667Z,1528887827.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:48.046Z,1528887828.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:48.064Z,1528887828.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:48.455Z,1528887828.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:48.473Z,1528887828.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:48.854Z,1528887828.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:48.876Z,1528887828.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:49.255Z,1528887829.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:49.273Z,1528887829.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:49.645Z,1528887829.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:49.663Z,1528887829.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:50.043Z,1528887830.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:50.066Z,1528887830.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:50.443Z,1528887830.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:50.477Z,1528887830.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:50.854Z,1528887830.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:50.876Z,1528887830.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:51.254Z,1528887831.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:51.276Z,1528887831.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:51.660Z,1528887831.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:51.678Z,1528887831.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:52.035Z,1528887832.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:52.062Z,1528887832.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:52.439Z,1528887832.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:52.473Z,1528887832.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:52.840Z,1528887832.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:52.873Z,1528887832.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:53.239Z,1528887833.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:53.272Z,1528887833.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:53.655Z,1528887833.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:53.673Z,1528887833.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:54.060Z,1528887834.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:54.078Z,1528887834.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:54.451Z,1528887834.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:54.469Z,1528887834.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:54.839Z,1528887834.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:54.866Z,1528887834.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:55.239Z,1528887835.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:55.270Z,1528887835.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:55.639Z,1528887835.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:55.676Z,1528887835.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:56.040Z,1528887836.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:56.068Z,1528887836.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:56.439Z,1528887836.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:56.478Z,1528887836.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:56.845Z,1528887836.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:56.877Z,1528887836.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:57.259Z,1528887837.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:57.276Z,1528887837.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:57.660Z,1528887837.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:57.678Z,1528887837.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:58.043Z,1528887838.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:58.070Z,1528887838.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:58.439Z,1528887838.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:58.471Z,1528887838.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:58.840Z,1528887838.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:58.880Z,1528887838.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:59.235Z,1528887839.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:59.268Z,1528887839.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:03:59.649Z,1528887839.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:03:59.681Z,1528887839.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:00.061Z,1528887840.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:00.079Z,1528887840.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:00.445Z,1528887840.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:00.472Z,1528887840.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:00.839Z,1528887840.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:00.877Z,1528887840.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:01.239Z,1528887841.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:01.274Z,1528887841.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:01.639Z,1528887841.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:01.657Z,1528887841.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:02.040Z,1528887842.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:02.075Z,1528887842.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:02.442Z,1528887842.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:02.451Z,1528887842.451 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T11:04:02.452Z,1528887842.452 [BPC1] Communications Fault, FailCount= 2
2018-06-13T11:04:02.452Z,1528887842.452 [BPC1](ERROR): Communications Fault
2018-06-13T11:04:02.462Z,1528887842.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:02.541Z,1528887842.541 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T11:04:02.846Z,1528887842.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:02.868Z,1528887842.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:03.253Z,1528887843.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:03.271Z,1528887843.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:03.653Z,1528887843.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:03.671Z,1528887843.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:03.765Z,1528887843.765 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T11:04:03.765Z,1528887843.765 [BPC1] No Fault, FailCount= 2
2018-06-13T11:04:04.039Z,1528887844.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:04.112Z,1528887844.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:04.444Z,1528887844.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:04.461Z,1528887844.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:04.846Z,1528887844.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:04.864Z,1528887844.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:05.239Z,1528887845.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:05.261Z,1528887845.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:05.649Z,1528887845.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:05.667Z,1528887845.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:06.053Z,1528887846.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:06.071Z,1528887846.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:06.450Z,1528887846.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:06.467Z,1528887846.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:06.846Z,1528887846.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:06.864Z,1528887846.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:07.245Z,1528887847.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:07.263Z,1528887847.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:07.639Z,1528887847.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:07.669Z,1528887847.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:08.043Z,1528887848.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:08.080Z,1528887848.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:08.443Z,1528887848.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:08.468Z,1528887848.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:08.856Z,1528887848.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:08.874Z,1528887848.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:09.255Z,1528887849.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:09.273Z,1528887849.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:09.656Z,1528887849.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:09.674Z,1528887849.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:10.039Z,1528887850.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:10.063Z,1528887850.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:10.451Z,1528887850.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:10.468Z,1528887850.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:10.847Z,1528887850.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:10.866Z,1528887850.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:11.239Z,1528887851.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:11.264Z,1528887851.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:11.657Z,1528887851.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:11.675Z,1528887851.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:12.057Z,1528887852.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:12.075Z,1528887852.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:12.452Z,1528887852.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:12.476Z,1528887852.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:12.844Z,1528887852.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:12.880Z,1528887852.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:13.246Z,1528887853.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:13.264Z,1528887853.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:13.635Z,1528887853.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:13.664Z,1528887853.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:14.040Z,1528887854.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:14.067Z,1528887854.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:14.435Z,1528887854.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:14.472Z,1528887854.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:14.845Z,1528887854.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:14.874Z,1528887854.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:15.258Z,1528887855.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:15.276Z,1528887855.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:15.660Z,1528887855.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:15.679Z,1528887855.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:16.035Z,1528887856.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:16.071Z,1528887856.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:16.440Z,1528887856.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:16.479Z,1528887856.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:16.835Z,1528887856.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:16.873Z,1528887856.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:17.235Z,1528887857.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:17.271Z,1528887857.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:17.656Z,1528887857.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:17.673Z,1528887857.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:18.049Z,1528887858.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:18.076Z,1528887858.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:18.446Z,1528887858.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:18.481Z,1528887858.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:18.839Z,1528887858.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:18.875Z,1528887858.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:19.239Z,1528887859.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:19.272Z,1528887859.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:19.639Z,1528887859.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:19.672Z,1528887859.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:20.040Z,1528887860.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:20.078Z,1528887860.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:20.435Z,1528887860.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:20.477Z,1528887860.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:20.849Z,1528887860.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:20.883Z,1528887860.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:21.252Z,1528887861.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:21.282Z,1528887861.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:21.660Z,1528887861.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:21.678Z,1528887861.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:22.039Z,1528887862.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:22.076Z,1528887862.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:22.439Z,1528887862.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:22.456Z,1528887862.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:22.835Z,1528887862.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:22.853Z,1528887862.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:23.240Z,1528887863.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:23.284Z,1528887863.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:23.653Z,1528887863.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:23.687Z,1528887863.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:24.057Z,1528887864.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:24.085Z,1528887864.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:24.449Z,1528887864.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:24.483Z,1528887864.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:24.843Z,1528887864.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:24.868Z,1528887864.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:25.246Z,1528887865.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:25.264Z,1528887865.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:28.353Z,1528887868.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:28.371Z,1528887868.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:28.503Z,1528887868.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:28.548Z,1528887868.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:28.913Z,1528887868.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:28.947Z,1528887868.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:29.318Z,1528887869.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:29.343Z,1528887869.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:29.710Z,1528887869.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:29.743Z,1528887869.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:30.097Z,1528887870.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:30.115Z,1528887870.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:30.496Z,1528887870.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:30.514Z,1528887870.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:30.900Z,1528887870.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:30.920Z,1528887870.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:31.297Z,1528887871.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:31.316Z,1528887871.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:31.702Z,1528887871.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:31.720Z,1528887871.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:32.109Z,1528887872.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:32.127Z,1528887872.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:32.505Z,1528887872.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:32.528Z,1528887872.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:32.900Z,1528887872.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:32.924Z,1528887872.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:33.300Z,1528887873.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:33.319Z,1528887873.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:33.698Z,1528887873.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:33.715Z,1528887873.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:34.102Z,1528887874.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:34.120Z,1528887874.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:34.500Z,1528887874.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:34.518Z,1528887874.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:34.909Z,1528887874.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:34.927Z,1528887874.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:35.310Z,1528887875.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:35.327Z,1528887875.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:35.705Z,1528887875.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:35.724Z,1528887875.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:36.098Z,1528887876.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:36.116Z,1528887876.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:36.500Z,1528887876.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:36.518Z,1528887876.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:36.900Z,1528887876.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:36.921Z,1528887876.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:37.300Z,1528887877.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:37.318Z,1528887877.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:37.706Z,1528887877.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:37.724Z,1528887877.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:38.110Z,1528887878.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:38.128Z,1528887878.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:38.505Z,1528887878.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:38.528Z,1528887878.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:38.900Z,1528887878.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:38.918Z,1528887878.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:39.300Z,1528887879.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:39.318Z,1528887879.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:39.701Z,1528887879.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:39.719Z,1528887879.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:40.100Z,1528887880.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:40.118Z,1528887880.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:40.500Z,1528887880.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:40.518Z,1528887880.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:40.909Z,1528887880.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:40.927Z,1528887880.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:41.309Z,1528887881.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:41.327Z,1528887881.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:41.706Z,1528887881.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:41.723Z,1528887881.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:42.101Z,1528887882.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:42.119Z,1528887882.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:42.500Z,1528887882.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:42.518Z,1528887882.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:42.902Z,1528887882.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:42.920Z,1528887882.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:43.297Z,1528887883.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:43.315Z,1528887883.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:43.706Z,1528887883.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:43.724Z,1528887883.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:44.110Z,1528887884.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:44.127Z,1528887884.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:44.510Z,1528887884.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:44.527Z,1528887884.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:44.900Z,1528887884.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:44.919Z,1528887884.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:45.300Z,1528887885.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:45.318Z,1528887885.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:45.700Z,1528887885.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:45.718Z,1528887885.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:46.100Z,1528887886.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:46.118Z,1528887886.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:46.499Z,1528887886.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:46.518Z,1528887886.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:46.910Z,1528887886.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:46.927Z,1528887886.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:47.309Z,1528887887.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:47.327Z,1528887887.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:47.706Z,1528887887.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:47.724Z,1528887887.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:48.101Z,1528887888.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:48.124Z,1528887888.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:48.500Z,1528887888.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:48.518Z,1528887888.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:48.900Z,1528887888.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:48.920Z,1528887888.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:49.300Z,1528887889.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:49.318Z,1528887889.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:49.706Z,1528887889.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:49.725Z,1528887889.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:50.109Z,1528887890.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:50.127Z,1528887890.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:50.510Z,1528887890.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:50.527Z,1528887890.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:50.900Z,1528887890.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:50.918Z,1528887890.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:51.300Z,1528887891.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:51.318Z,1528887891.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:51.702Z,1528887891.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:51.721Z,1528887891.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:52.101Z,1528887892.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:52.124Z,1528887892.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:52.503Z,1528887892.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:52.521Z,1528887892.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:52.918Z,1528887892.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:52.957Z,1528887892.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:53.310Z,1528887893.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:53.327Z,1528887893.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:53.706Z,1528887893.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:53.724Z,1528887893.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:54.100Z,1528887894.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:54.130Z,1528887894.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:54.502Z,1528887894.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:54.524Z,1528887894.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:54.899Z,1528887894.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:54.931Z,1528887894.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:55.308Z,1528887895.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:55.325Z,1528887895.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:55.710Z,1528887895.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:55.728Z,1528887895.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:56.110Z,1528887896.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:56.128Z,1528887896.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:56.510Z,1528887896.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:56.529Z,1528887896.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:56.894Z,1528887896.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:56.924Z,1528887896.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:57.299Z,1528887897.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:57.324Z,1528887897.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:57.699Z,1528887897.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:57.729Z,1528887897.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:58.094Z,1528887898.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:58.121Z,1528887898.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:58.499Z,1528887898.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:58.523Z,1528887898.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:58.911Z,1528887898.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:58.936Z,1528887898.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:59.309Z,1528887899.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:59.328Z,1528887899.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:04:59.710Z,1528887899.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:04:59.728Z,1528887899.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:00.094Z,1528887900.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:00.129Z,1528887900.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:00.501Z,1528887900.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:00.519Z,1528887900.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:00.899Z,1528887900.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:00.922Z,1528887900.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:01.299Z,1528887901.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:01.325Z,1528887901.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:01.710Z,1528887901.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:01.732Z,1528887901.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:02.110Z,1528887902.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:02.132Z,1528887902.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:02.511Z,1528887902.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:02.529Z,1528887902.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:02.894Z,1528887902.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:02.926Z,1528887902.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:03.299Z,1528887903.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:03.322Z,1528887903.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:03.702Z,1528887903.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:03.720Z,1528887903.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:04.098Z,1528887904.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:04.121Z,1528887904.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:04.499Z,1528887904.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:04.559Z,1528887904.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:04.911Z,1528887904.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:04.930Z,1528887904.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:05.310Z,1528887905.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:05.328Z,1528887905.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:05.710Z,1528887905.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:05.728Z,1528887905.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:06.099Z,1528887906.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:06.126Z,1528887906.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:06.501Z,1528887906.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:06.519Z,1528887906.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:06.894Z,1528887906.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:06.928Z,1528887906.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:07.299Z,1528887907.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:07.324Z,1528887907.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:07.707Z,1528887907.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:07.732Z,1528887907.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:08.110Z,1528887908.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:08.129Z,1528887908.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:08.510Z,1528887908.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:08.528Z,1528887908.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:08.901Z,1528887908.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:08.927Z,1528887908.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:09.299Z,1528887909.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:09.322Z,1528887909.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:09.702Z,1528887909.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:09.720Z,1528887909.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:10.095Z,1528887910.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:10.125Z,1528887910.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:10.501Z,1528887910.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:10.536Z,1528887910.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:10.912Z,1528887910.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:10.930Z,1528887910.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:11.310Z,1528887911.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:11.328Z,1528887911.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:11.711Z,1528887911.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:11.728Z,1528887911.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:12.099Z,1528887912.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:12.125Z,1528887912.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:12.501Z,1528887912.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:12.527Z,1528887912.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:12.899Z,1528887912.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:12.930Z,1528887912.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:13.291Z,1528887913.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:13.320Z,1528887913.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:13.708Z,1528887913.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:13.726Z,1528887913.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:14.114Z,1528887914.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:14.132Z,1528887914.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:14.514Z,1528887914.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:14.533Z,1528887914.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:14.901Z,1528887914.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:14.919Z,1528887914.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:15.299Z,1528887915.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:15.322Z,1528887915.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:15.699Z,1528887915.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:15.730Z,1528887915.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:16.092Z,1528887916.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:16.127Z,1528887916.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:16.501Z,1528887916.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:16.519Z,1528887916.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:16.915Z,1528887916.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:16.940Z,1528887916.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:17.315Z,1528887917.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:17.368Z,1528887917.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:17.712Z,1528887917.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:17.730Z,1528887917.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:18.095Z,1528887918.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:18.130Z,1528887918.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:18.499Z,1528887918.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:18.527Z,1528887918.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:18.896Z,1528887918.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:18.932Z,1528887918.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:19.295Z,1528887919.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:19.329Z,1528887919.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:19.711Z,1528887919.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:19.737Z,1528887919.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:20.115Z,1528887920.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:20.133Z,1528887920.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:20.510Z,1528887920.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:20.535Z,1528887920.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:20.895Z,1528887920.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:20.928Z,1528887920.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:21.295Z,1528887921.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:21.327Z,1528887921.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:21.695Z,1528887921.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:21.752Z,1528887921.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:22.096Z,1528887922.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:22.136Z,1528887922.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:22.495Z,1528887922.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:22.533Z,1528887922.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:22.910Z,1528887922.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:22.939Z,1528887922.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:23.309Z,1528887923.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:23.344Z,1528887923.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:23.705Z,1528887923.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:23.733Z,1528887923.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:24.095Z,1528887924.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:24.130Z,1528887924.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:24.495Z,1528887924.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:24.540Z,1528887924.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:24.899Z,1528887924.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:24.918Z,1528887924.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:25.299Z,1528887925.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:25.317Z,1528887925.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:28.435Z,1528887928.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:28.459Z,1528887928.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:28.578Z,1528887928.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:28.616Z,1528887928.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:28.988Z,1528887928.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:29.007Z,1528887929.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:29.364Z,1528887929.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:29.399Z,1528887929.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:29.763Z,1528887929.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:29.808Z,1528887929.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:30.164Z,1528887930.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:30.223Z,1528887930.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:30.563Z,1528887930.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:30.582Z,1528887930.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:30.977Z,1528887930.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:31.015Z,1528887931.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:31.377Z,1528887931.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:31.417Z,1528887931.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:31.778Z,1528887931.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:31.816Z,1528887931.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:32.166Z,1528887932.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:32.184Z,1528887932.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:32.566Z,1528887932.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:32.584Z,1528887932.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:32.966Z,1528887932.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:32.984Z,1528887932.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:33.369Z,1528887933.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:33.387Z,1528887933.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:33.777Z,1528887933.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:33.818Z,1528887933.818 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:33.818Z,1528887933.818 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 153
2018-06-13T11:05:33.818Z,1528887933.818 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:05:33.820Z,1528887933.820 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:33.820Z,1528887933.820 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 153
2018-06-13T11:05:33.820Z,1528887933.820 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:05:33.826Z,1528887933.826 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:33.826Z,1528887933.826 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 153
2018-06-13T11:05:33.826Z,1528887933.826 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:05:33.905Z,1528887933.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:05:33.905Z,1528887933.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:05:33.905Z,1528887933.905 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:05:34.179Z,1528887934.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:34.301Z,1528887934.301 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:05:34.301Z,1528887934.301 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 153
2018-06-13T11:05:34.302Z,1528887934.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:05:34.302Z,1528887934.302 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 153
2018-06-13T11:05:34.302Z,1528887934.302 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:05:34.302Z,1528887934.302 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 153
2018-06-13T11:05:34.579Z,1528887934.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:34.596Z,1528887934.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:05:34.596Z,1528887934.596 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:05:34.597Z,1528887934.597 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:05:34.598Z,1528887934.598 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:05:34.598Z,1528887934.598 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:05:34.598Z,1528887934.598 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:05:34.599Z,1528887934.599 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:05:34.599Z,1528887934.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:05:34.599Z,1528887934.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:05:34.966Z,1528887934.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:35.001Z,1528887935.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:05:35.002Z,1528887935.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:35.369Z,1528887935.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:35.387Z,1528887935.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:05:35.388Z,1528887935.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:35.769Z,1528887935.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:35.787Z,1528887935.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:05:35.788Z,1528887935.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:36.170Z,1528887936.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:36.193Z,1528887936.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:05:36.194Z,1528887936.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:36.559Z,1528887936.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:36.595Z,1528887936.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:05:36.596Z,1528887936.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:36.979Z,1528887936.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:36.998Z,1528887936.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:05:36.999Z,1528887936.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:37.383Z,1528887937.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:37.404Z,1528887937.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:05:37.405Z,1528887937.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:37.780Z,1528887937.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:37.799Z,1528887937.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:05:37.800Z,1528887937.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:38.168Z,1528887938.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:38.194Z,1528887938.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:05:38.195Z,1528887938.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:38.571Z,1528887938.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:38.589Z,1528887938.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:05:38.590Z,1528887938.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:38.971Z,1528887938.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:39.030Z,1528887939.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:05:39.031Z,1528887939.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:39.374Z,1528887939.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:39.396Z,1528887939.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:05:39.397Z,1528887939.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:39.786Z,1528887939.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:39.804Z,1528887939.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:05:39.805Z,1528887939.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:40.182Z,1528887940.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:40.200Z,1528887940.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:05:40.202Z,1528887940.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:40.581Z,1528887940.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:40.599Z,1528887940.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:05:40.600Z,1528887940.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:40.964Z,1528887940.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:40.995Z,1528887940.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:05:40.995Z,1528887940.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:41.359Z,1528887941.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:41.403Z,1528887941.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:05:41.403Z,1528887941.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:41.763Z,1528887941.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:41.801Z,1528887941.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:05:41.802Z,1528887941.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:42.164Z,1528887942.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:42.194Z,1528887942.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:05:42.195Z,1528887942.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:42.559Z,1528887942.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:42.600Z,1528887942.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:05:42.601Z,1528887942.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:42.984Z,1528887942.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:43.020Z,1528887943.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:05:43.037Z,1528887943.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:43.383Z,1528887943.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:43.408Z,1528887943.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:05:43.409Z,1528887943.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:43.779Z,1528887943.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:43.798Z,1528887943.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:05:43.799Z,1528887943.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:44.163Z,1528887944.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:44.203Z,1528887944.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:05:44.204Z,1528887944.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:44.563Z,1528887944.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:44.598Z,1528887944.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:05:44.599Z,1528887944.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:44.960Z,1528887944.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:44.994Z,1528887944.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:05:44.995Z,1528887944.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:45.363Z,1528887945.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:45.403Z,1528887945.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:05:45.404Z,1528887945.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:45.778Z,1528887945.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:45.820Z,1528887945.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:05:45.821Z,1528887945.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:46.180Z,1528887946.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:46.207Z,1528887946.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:05:46.207Z,1528887946.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:46.573Z,1528887946.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:46.607Z,1528887946.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:05:46.608Z,1528887946.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:46.967Z,1528887946.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:46.986Z,1528887946.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:05:46.987Z,1528887946.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:47.366Z,1528887947.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:47.383Z,1528887947.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:05:47.384Z,1528887947.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:47.766Z,1528887947.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:47.784Z,1528887947.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:05:47.785Z,1528887947.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:48.168Z,1528887948.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:48.202Z,1528887948.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:05:48.203Z,1528887948.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:48.569Z,1528887948.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:48.586Z,1528887948.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:05:48.587Z,1528887948.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:48.974Z,1528887948.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:48.996Z,1528887948.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:05:48.998Z,1528887948.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:49.377Z,1528887949.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:49.395Z,1528887949.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:05:49.396Z,1528887949.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:49.774Z,1528887949.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:49.792Z,1528887949.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:05:49.793Z,1528887949.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:50.167Z,1528887950.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:50.189Z,1528887950.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:05:50.190Z,1528887950.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:50.570Z,1528887950.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:50.588Z,1528887950.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:05:50.588Z,1528887950.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:50.970Z,1528887950.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:50.988Z,1528887950.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:05:50.988Z,1528887950.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:51.367Z,1528887951.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:51.389Z,1528887951.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:05:51.390Z,1528887951.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:51.778Z,1528887951.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:51.796Z,1528887951.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:05:51.798Z,1528887951.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:52.177Z,1528887952.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:52.195Z,1528887952.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:05:52.196Z,1528887952.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:52.574Z,1528887952.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:52.596Z,1528887952.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:05:52.597Z,1528887952.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:52.967Z,1528887952.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:53.000Z,1528887953.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:05:53.002Z,1528887953.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:53.369Z,1528887953.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:53.387Z,1528887953.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:05:53.387Z,1528887953.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:53.772Z,1528887953.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:53.791Z,1528887953.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T11:05:53.792Z,1528887953.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:54.168Z,1528887954.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:54.200Z,1528887954.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:54.569Z,1528887954.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:54.587Z,1528887954.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:54.978Z,1528887954.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:54.996Z,1528887954.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:55.377Z,1528887955.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:55.424Z,1528887955.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:55.779Z,1528887955.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:55.828Z,1528887955.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:56.169Z,1528887956.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:56.187Z,1528887956.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:56.571Z,1528887956.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:56.590Z,1528887956.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:56.970Z,1528887956.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:56.988Z,1528887956.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:57.369Z,1528887957.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:57.396Z,1528887957.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:57.782Z,1528887957.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:57.836Z,1528887957.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:58.183Z,1528887958.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:58.202Z,1528887958.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:58.580Z,1528887958.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:58.598Z,1528887958.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:58.963Z,1528887958.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:58.996Z,1528887958.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:59.359Z,1528887959.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:59.386Z,1528887959.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:05:59.763Z,1528887959.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:05:59.795Z,1528887959.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:00.164Z,1528887960.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:00.197Z,1528887960.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:00.563Z,1528887960.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:00.605Z,1528887960.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:00.979Z,1528887960.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:00.998Z,1528887960.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:01.385Z,1528887961.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:01.405Z,1528887961.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:01.775Z,1528887961.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:01.793Z,1528887961.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:02.163Z,1528887962.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:02.196Z,1528887962.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:02.563Z,1528887962.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:02.601Z,1528887962.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:02.964Z,1528887962.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:02.991Z,1528887962.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:03.367Z,1528887963.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:03.395Z,1528887963.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:03.784Z,1528887963.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:03.803Z,1528887963.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:04.178Z,1528887964.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:04.196Z,1528887964.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:04.579Z,1528887964.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:04.598Z,1528887964.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:04.963Z,1528887964.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:04.998Z,1528887964.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:05.363Z,1528887965.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:05.396Z,1528887965.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:05.763Z,1528887965.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:05.800Z,1528887965.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:06.164Z,1528887966.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:06.203Z,1528887966.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:06.563Z,1528887966.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:06.595Z,1528887966.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:06.980Z,1528887966.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:06.998Z,1528887966.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:07.384Z,1528887967.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:07.403Z,1528887967.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:07.780Z,1528887967.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:07.799Z,1528887967.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:08.164Z,1528887968.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:08.209Z,1528887968.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:08.563Z,1528887968.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:08.594Z,1528887968.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:08.960Z,1528887968.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:08.000Z,1528887969.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:09.363Z,1528887969.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:09.412Z,1528887969.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:09.777Z,1528887969.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:09.807Z,1528887969.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:10.178Z,1528887970.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:10.207Z,1528887970.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:10.573Z,1528887970.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:10.608Z,1528887970.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:10.963Z,1528887970.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:10.982Z,1528887970.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:11.363Z,1528887971.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:11.381Z,1528887971.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:11.767Z,1528887971.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:11.785Z,1528887971.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:12.166Z,1528887972.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:12.184Z,1528887972.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:12.566Z,1528887972.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:12.584Z,1528887972.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:12.978Z,1528887972.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:13.015Z,1528887973.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:13.377Z,1528887973.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:13.415Z,1528887973.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:13.770Z,1528887973.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:13.788Z,1528887973.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:14.166Z,1528887974.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:14.184Z,1528887974.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:14.565Z,1528887974.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:14.583Z,1528887974.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:14.967Z,1528887974.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:14.985Z,1528887974.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:15.367Z,1528887975.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:15.385Z,1528887975.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:15.781Z,1528887975.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:15.808Z,1528887975.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:16.178Z,1528887976.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:16.196Z,1528887976.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:16.574Z,1528887976.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:16.592Z,1528887976.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:16.970Z,1528887976.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:16.989Z,1528887976.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:17.370Z,1528887977.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:17.388Z,1528887977.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:17.775Z,1528887977.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:17.794Z,1528887977.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:18.171Z,1528887978.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:18.203Z,1528887978.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:18.570Z,1528887978.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:18.588Z,1528887978.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:18.978Z,1528887978.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:19.002Z,1528887979.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:19.382Z,1528887979.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:19.421Z,1528887979.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:19.780Z,1528887979.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:19.805Z,1528887979.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:20.170Z,1528887980.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:20.189Z,1528887980.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:20.567Z,1528887980.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:20.620Z,1528887980.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:20.970Z,1528887980.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:21.036Z,1528887981.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:21.364Z,1528887981.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:21.412Z,1528887981.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:21.786Z,1528887981.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:21.806Z,1528887981.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:22.180Z,1528887982.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:22.199Z,1528887982.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:22.584Z,1528887982.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:22.603Z,1528887982.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:22.963Z,1528887982.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:22.992Z,1528887982.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:23.363Z,1528887983.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:23.391Z,1528887983.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:23.763Z,1528887983.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:23.801Z,1528887983.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:24.172Z,1528887984.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:24.190Z,1528887984.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:24.564Z,1528887984.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:24.596Z,1528887984.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:24.979Z,1528887984.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:25.005Z,1528887985.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:25.009Z,1528887985.009 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T11:06:25.009Z,1528887985.009 [Default:CheckIn:C.Wait] Stopped
2018-06-13T11:06:25.009Z,1528887985.009 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T11:06:25.009Z,1528887985.009 [Default:CheckIn:D] Running Loop=1
2018-06-13T11:06:25.387Z,1528887985.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:25.407Z,1528887985.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:25.410Z,1528887985.410 [Default:CheckIn:D] Stopped
2018-06-13T11:06:25.410Z,1528887985.410 [Default:CheckIn:E] Running Loop=1
2018-06-13T11:06:28.494Z,1528887988.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:28.512Z,1528887988.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:28.518Z,1528887988.518 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 459.199414 min 
2018-06-13T11:06:28.518Z,1528887988.518 [Default:CheckIn:E] Stopped
2018-06-13T11:06:28.519Z,1528887988.519 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T11:06:28.519Z,1528887988.519 [Default:CheckIn] Stopped
2018-06-13T11:06:28.519Z,1528887988.519 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T11:06:28.519Z,1528887988.519 [Default:CheckIn](INFO): Running loop #45
2018-06-13T11:06:28.520Z,1528887988.520 [Default:CheckIn] Running Loop=45
2018-06-13T11:06:28.520Z,1528887988.520 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T11:06:28.520Z,1528887988.520 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T11:06:28.656Z,1528887988.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:28.675Z,1528887988.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:29.051Z,1528887989.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:29.070Z,1528887989.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:29.450Z,1528887989.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:29.469Z,1528887989.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:29.857Z,1528887989.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:29.901Z,1528887989.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:30.260Z,1528887990.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:30.278Z,1528887990.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:30.659Z,1528887990.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:30.678Z,1528887990.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:31.047Z,1528887991.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:31.072Z,1528887991.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:31.447Z,1528887991.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:31.478Z,1528887991.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:31.839Z,1528887991.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:31.876Z,1528887991.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:32.244Z,1528887992.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:32.282Z,1528887992.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:32.640Z,1528887992.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:32.669Z,1528887992.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:33.027Z,1528887993.027 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T11:06:33.027Z,1528887993.027 [NAL9602] Data Fault, FailCount= 2
2018-06-13T11:06:33.027Z,1528887993.027 [NAL9602](ERROR): Data Fault
2018-06-13T11:06:33.044Z,1528887993.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:33.090Z,1528887993.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:33.181Z,1528887993.181 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T11:06:33.426Z,1528887993.426 [NAL9602](INFO): Powering down
2018-06-13T11:06:33.444Z,1528887993.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:33.496Z,1528887993.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:33.841Z,1528887993.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:33.876Z,1528887993.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:34.238Z,1528887994.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:34.275Z,1528887994.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:34.353Z,1528887994.353 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T11:06:34.353Z,1528887994.353 [NAL9602] No Fault, FailCount= 2
2018-06-13T11:06:34.642Z,1528887994.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:34.671Z,1528887994.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:35.042Z,1528887995.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:35.070Z,1528887995.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:35.439Z,1528887995.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:35.475Z,1528887995.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:35.843Z,1528887995.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:35.870Z,1528887995.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:36.242Z,1528887996.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:36.270Z,1528887996.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:36.638Z,1528887996.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:36.676Z,1528887996.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:37.043Z,1528887997.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:37.070Z,1528887997.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:37.443Z,1528887997.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:37.471Z,1528887997.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:37.838Z,1528887997.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:37.880Z,1528887997.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:38.243Z,1528887998.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:38.276Z,1528887998.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:38.642Z,1528887998.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:38.670Z,1528887998.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:39.043Z,1528887999.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:39.070Z,1528887999.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:39.444Z,1528887999.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:39.471Z,1528887999.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:39.837Z,1528887999.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:39.871Z,1528887999.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:40.243Z,1528888000.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:40.272Z,1528888000.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:40.643Z,1528888000.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:40.676Z,1528888000.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:41.037Z,1528888001.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:41.071Z,1528888001.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:41.437Z,1528888001.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:41.468Z,1528888001.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:41.843Z,1528888001.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:41.880Z,1528888001.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:42.242Z,1528888002.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:42.276Z,1528888002.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:42.643Z,1528888002.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:42.680Z,1528888002.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:43.043Z,1528888003.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:43.079Z,1528888003.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:43.438Z,1528888003.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:43.493Z,1528888003.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:43.843Z,1528888003.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:43.880Z,1528888003.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:44.243Z,1528888004.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:44.275Z,1528888004.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:44.642Z,1528888004.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:44.680Z,1528888004.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:45.043Z,1528888005.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:45.075Z,1528888005.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:45.443Z,1528888005.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:45.480Z,1528888005.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:45.843Z,1528888005.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:45.876Z,1528888005.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:46.242Z,1528888006.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:46.275Z,1528888006.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:46.643Z,1528888006.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:46.675Z,1528888006.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:47.042Z,1528888007.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:47.083Z,1528888007.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:47.443Z,1528888007.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:47.480Z,1528888007.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:47.843Z,1528888007.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:47.876Z,1528888007.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:48.242Z,1528888008.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:48.276Z,1528888008.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:48.643Z,1528888008.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:48.680Z,1528888008.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:49.044Z,1528888009.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:49.079Z,1528888009.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:49.437Z,1528888009.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:49.475Z,1528888009.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:49.843Z,1528888009.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:49.876Z,1528888009.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:50.243Z,1528888010.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:50.280Z,1528888010.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:50.643Z,1528888010.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:50.679Z,1528888010.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:51.043Z,1528888011.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:51.075Z,1528888011.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:51.443Z,1528888011.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:51.475Z,1528888011.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:51.838Z,1528888011.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:51.876Z,1528888011.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:52.243Z,1528888012.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:52.275Z,1528888012.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:52.643Z,1528888012.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:52.675Z,1528888012.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:53.042Z,1528888013.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:53.084Z,1528888013.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:53.443Z,1528888013.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:53.475Z,1528888013.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:53.842Z,1528888013.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:53.879Z,1528888013.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:54.243Z,1528888014.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:54.279Z,1528888014.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:54.643Z,1528888014.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:54.675Z,1528888014.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:55.043Z,1528888015.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:55.082Z,1528888015.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:55.438Z,1528888015.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:55.479Z,1528888015.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:55.843Z,1528888015.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:55.875Z,1528888015.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:56.243Z,1528888016.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:56.275Z,1528888016.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:56.642Z,1528888016.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:56.680Z,1528888016.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:57.047Z,1528888017.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:57.074Z,1528888017.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:57.443Z,1528888017.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:57.475Z,1528888017.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:57.842Z,1528888017.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:57.880Z,1528888017.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:58.243Z,1528888018.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:58.275Z,1528888018.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:58.644Z,1528888018.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:58.676Z,1528888018.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:59.043Z,1528888019.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:59.080Z,1528888019.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:59.443Z,1528888019.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:59.475Z,1528888019.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:06:59.843Z,1528888019.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:06:59.883Z,1528888019.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:00.238Z,1528888020.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:00.279Z,1528888020.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:00.643Z,1528888020.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:00.676Z,1528888020.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:01.043Z,1528888021.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:01.080Z,1528888021.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:01.442Z,1528888021.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:01.475Z,1528888021.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:01.843Z,1528888021.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:01.875Z,1528888021.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:02.243Z,1528888022.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:02.275Z,1528888022.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:02.642Z,1528888022.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:02.677Z,1528888022.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:03.043Z,1528888023.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:03.075Z,1528888023.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:03.431Z,1528888023.431 [NAL9602](INFO): Powering up NAL9602
2018-06-13T11:07:03.448Z,1528888023.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:03.484Z,1528888023.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:03.843Z,1528888023.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:03.877Z,1528888023.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:04.243Z,1528888024.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:04.276Z,1528888024.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:04.643Z,1528888024.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:04.683Z,1528888024.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:05.043Z,1528888025.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:05.069Z,1528888025.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:05.448Z,1528888025.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:05.484Z,1528888025.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:05.843Z,1528888025.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:05.878Z,1528888025.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:06.243Z,1528888026.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:06.261Z,1528888026.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:06.647Z,1528888026.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:06.666Z,1528888026.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:07.047Z,1528888027.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:07.065Z,1528888027.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:07.447Z,1528888027.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:07.466Z,1528888027.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:07.846Z,1528888027.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:07.865Z,1528888027.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:08.246Z,1528888028.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:08.272Z,1528888028.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:08.646Z,1528888028.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:08.664Z,1528888028.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:09.049Z,1528888029.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:09.067Z,1528888029.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:09.447Z,1528888029.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:09.470Z,1528888029.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:09.844Z,1528888029.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:09.869Z,1528888029.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:10.249Z,1528888030.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:10.267Z,1528888030.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:10.650Z,1528888030.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:10.668Z,1528888030.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:11.049Z,1528888031.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:11.067Z,1528888031.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:11.449Z,1528888031.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:11.467Z,1528888031.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:11.847Z,1528888031.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:11.872Z,1528888031.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:12.250Z,1528888032.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:12.268Z,1528888032.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:12.648Z,1528888032.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:12.666Z,1528888032.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:13.047Z,1528888033.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:13.070Z,1528888033.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:13.448Z,1528888033.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:13.466Z,1528888033.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:13.847Z,1528888033.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:13.865Z,1528888033.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:14.253Z,1528888034.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:14.272Z,1528888034.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:14.622Z,1528888034.622 [NAL9602](INFO): NAL9602 initialized
2018-06-13T11:07:14.643Z,1528888034.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:14.680Z,1528888034.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:15.050Z,1528888035.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:15.068Z,1528888035.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:15.461Z,1528888035.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:15.479Z,1528888035.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:15.858Z,1528888035.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:15.876Z,1528888035.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:16.259Z,1528888036.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:16.278Z,1528888036.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:16.650Z,1528888036.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:16.672Z,1528888036.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:17.055Z,1528888037.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:17.073Z,1528888037.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:17.450Z,1528888037.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:17.468Z,1528888037.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:17.839Z,1528888037.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:17.876Z,1528888037.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:18.259Z,1528888038.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:18.277Z,1528888038.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:18.662Z,1528888038.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:18.681Z,1528888038.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:19.064Z,1528888039.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:19.082Z,1528888039.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:19.447Z,1528888039.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:19.482Z,1528888039.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:19.843Z,1528888039.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:19.881Z,1528888039.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:20.246Z,1528888040.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:20.274Z,1528888040.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:20.648Z,1528888040.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:20.676Z,1528888040.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:21.041Z,1528888041.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:21.076Z,1528888041.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:21.461Z,1528888041.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:21.479Z,1528888041.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:21.857Z,1528888041.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:21.884Z,1528888041.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:22.264Z,1528888042.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:22.282Z,1528888042.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:22.643Z,1528888042.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:22.681Z,1528888042.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:23.043Z,1528888043.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:23.073Z,1528888043.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:23.442Z,1528888043.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:23.460Z,1528888043.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:23.848Z,1528888043.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:23.878Z,1528888043.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:24.261Z,1528888044.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:24.290Z,1528888044.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:24.661Z,1528888044.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:24.688Z,1528888044.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:25.061Z,1528888045.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:25.090Z,1528888045.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:25.448Z,1528888045.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:25.466Z,1528888045.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:25.851Z,1528888045.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:25.870Z,1528888045.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:26.250Z,1528888046.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:26.268Z,1528888046.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:26.655Z,1528888046.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:26.690Z,1528888046.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:29.766Z,1528888049.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:29.799Z,1528888049.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:29.937Z,1528888049.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:29.955Z,1528888049.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:30.335Z,1528888050.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:30.353Z,1528888050.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:30.733Z,1528888050.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:30.751Z,1528888050.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:31.111Z,1528888051.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:31.140Z,1528888051.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:31.512Z,1528888051.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:31.546Z,1528888051.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:31.907Z,1528888051.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:31.926Z,1528888051.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:32.325Z,1528888052.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:32.353Z,1528888052.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:32.725Z,1528888052.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:32.754Z,1528888052.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:33.121Z,1528888053.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:33.160Z,1528888053.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:33.511Z,1528888053.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:33.529Z,1528888053.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:33.911Z,1528888053.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:33.957Z,1528888053.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:34.315Z,1528888054.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:34.334Z,1528888054.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:34.714Z,1528888054.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:34.732Z,1528888054.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:35.125Z,1528888055.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:35.160Z,1528888055.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:35.525Z,1528888055.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:35.543Z,1528888055.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:35.922Z,1528888055.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:35.939Z,1528888055.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:36.316Z,1528888056.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:36.334Z,1528888056.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:36.715Z,1528888056.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:36.732Z,1528888056.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:37.125Z,1528888057.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:37.143Z,1528888057.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:37.525Z,1528888057.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:37.543Z,1528888057.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:37.921Z,1528888057.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:37.939Z,1528888057.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:38.316Z,1528888058.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:38.334Z,1528888058.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:38.715Z,1528888058.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:38.740Z,1528888058.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:39.121Z,1528888059.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:39.139Z,1528888059.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:39.525Z,1528888059.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:39.543Z,1528888059.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:39.922Z,1528888059.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:39.940Z,1528888059.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:40.317Z,1528888060.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:40.335Z,1528888060.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:40.716Z,1528888060.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:40.734Z,1528888060.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:41.121Z,1528888061.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:41.140Z,1528888061.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:41.521Z,1528888061.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:41.539Z,1528888061.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:41.925Z,1528888061.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:41.943Z,1528888061.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:42.316Z,1528888062.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:42.335Z,1528888062.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:42.716Z,1528888062.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:42.734Z,1528888062.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:43.125Z,1528888063.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:43.143Z,1528888063.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:43.525Z,1528888063.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:43.543Z,1528888063.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:43.921Z,1528888063.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:43.939Z,1528888063.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:44.316Z,1528888064.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:44.338Z,1528888064.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:44.716Z,1528888064.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:44.734Z,1528888064.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:45.121Z,1528888065.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:45.139Z,1528888065.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:45.526Z,1528888065.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:45.544Z,1528888065.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:45.922Z,1528888065.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:45.940Z,1528888065.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:46.317Z,1528888066.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:46.335Z,1528888066.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:46.716Z,1528888066.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:46.734Z,1528888066.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:47.121Z,1528888067.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:47.140Z,1528888067.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:47.525Z,1528888067.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:47.544Z,1528888067.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:47.921Z,1528888067.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:47.939Z,1528888067.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:48.320Z,1528888068.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:48.338Z,1528888068.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:48.716Z,1528888068.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:48.734Z,1528888068.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:49.123Z,1528888069.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:49.141Z,1528888069.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:49.522Z,1528888069.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:49.548Z,1528888069.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:49.929Z,1528888069.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:49.947Z,1528888069.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:50.319Z,1528888070.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:50.337Z,1528888070.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:50.718Z,1528888070.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:50.737Z,1528888070.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:51.116Z,1528888071.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:51.140Z,1528888071.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:51.527Z,1528888071.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:51.545Z,1528888071.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:51.926Z,1528888071.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:51.952Z,1528888071.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:52.328Z,1528888072.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:52.347Z,1528888072.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:52.715Z,1528888072.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:52.739Z,1528888072.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:53.119Z,1528888073.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:53.138Z,1528888073.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:53.515Z,1528888073.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:53.533Z,1528888073.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:53.922Z,1528888073.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:53.944Z,1528888073.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:54.326Z,1528888074.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:54.344Z,1528888074.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:54.727Z,1528888074.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:54.745Z,1528888074.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:55.127Z,1528888075.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:55.152Z,1528888075.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:55.517Z,1528888075.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:55.535Z,1528888075.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:55.918Z,1528888075.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:55.936Z,1528888075.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:56.317Z,1528888076.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:56.335Z,1528888076.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:56.717Z,1528888076.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:56.736Z,1528888076.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:57.118Z,1528888077.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:57.136Z,1528888077.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:57.526Z,1528888077.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:57.548Z,1528888077.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:57.926Z,1528888077.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:57.944Z,1528888077.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:58.326Z,1528888078.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:58.344Z,1528888078.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:58.717Z,1528888078.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:58.735Z,1528888078.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:59.117Z,1528888079.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:59.135Z,1528888079.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:59.518Z,1528888079.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:59.536Z,1528888079.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:07:59.910Z,1528888079.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:07:59.943Z,1528888079.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:00.326Z,1528888080.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:00.344Z,1528888080.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:00.727Z,1528888080.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:00.745Z,1528888080.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:01.126Z,1528888081.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:01.148Z,1528888081.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:01.517Z,1528888081.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:01.535Z,1528888081.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:01.920Z,1528888081.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:01.939Z,1528888081.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:02.317Z,1528888082.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:02.335Z,1528888082.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:02.718Z,1528888082.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:02.736Z,1528888082.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:03.117Z,1528888083.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:03.135Z,1528888083.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:03.526Z,1528888083.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:03.548Z,1528888083.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:03.926Z,1528888083.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:03.945Z,1528888083.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:04.326Z,1528888084.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:04.344Z,1528888084.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:04.718Z,1528888084.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:04.736Z,1528888084.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:05.120Z,1528888085.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:05.138Z,1528888085.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:05.518Z,1528888085.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:05.537Z,1528888085.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:05.921Z,1528888085.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:05.939Z,1528888085.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:06.326Z,1528888086.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:06.344Z,1528888086.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:06.728Z,1528888086.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:06.746Z,1528888086.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:07.130Z,1528888087.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:07.148Z,1528888087.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:07.517Z,1528888087.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:07.535Z,1528888087.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:07.907Z,1528888087.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:07.941Z,1528888087.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:08.314Z,1528888088.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:08.347Z,1528888088.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:08.716Z,1528888088.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:08.743Z,1528888088.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:09.111Z,1528888089.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:09.148Z,1528888089.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:09.532Z,1528888089.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:09.556Z,1528888089.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:09.930Z,1528888089.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:09.962Z,1528888089.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:10.328Z,1528888090.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:10.346Z,1528888090.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:10.715Z,1528888090.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:10.742Z,1528888090.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:11.111Z,1528888091.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:11.139Z,1528888091.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:11.515Z,1528888091.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:11.544Z,1528888091.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:11.914Z,1528888091.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:11.948Z,1528888091.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:12.332Z,1528888092.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:12.350Z,1528888092.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:12.731Z,1528888092.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:12.750Z,1528888092.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:13.128Z,1528888093.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:13.153Z,1528888093.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:13.514Z,1528888093.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:13.545Z,1528888093.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:13.913Z,1528888093.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:13.941Z,1528888093.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:14.315Z,1528888094.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:14.342Z,1528888094.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:14.714Z,1528888094.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:14.744Z,1528888094.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:15.113Z,1528888095.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:15.141Z,1528888095.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:15.535Z,1528888095.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:15.554Z,1528888095.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:15.935Z,1528888095.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:15.953Z,1528888095.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:16.332Z,1528888096.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:16.350Z,1528888096.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:16.713Z,1528888096.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:16.740Z,1528888096.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:17.114Z,1528888097.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:17.142Z,1528888097.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:17.516Z,1528888097.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:17.544Z,1528888097.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:17.911Z,1528888097.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:17.943Z,1528888097.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:18.329Z,1528888098.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:18.348Z,1528888098.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:18.725Z,1528888098.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:18.750Z,1528888098.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:19.136Z,1528888099.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:19.154Z,1528888099.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:19.511Z,1528888099.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:19.543Z,1528888099.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:19.913Z,1528888099.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:19.943Z,1528888099.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:20.314Z,1528888100.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:20.341Z,1528888100.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:20.715Z,1528888100.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:20.744Z,1528888100.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:21.111Z,1528888101.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:21.164Z,1528888101.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:21.530Z,1528888101.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:21.552Z,1528888101.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:21.931Z,1528888101.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:21.949Z,1528888101.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:22.320Z,1528888102.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:22.350Z,1528888102.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:22.711Z,1528888102.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:22.747Z,1528888102.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:23.111Z,1528888103.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:23.144Z,1528888103.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:23.511Z,1528888103.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:23.548Z,1528888103.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:23.915Z,1528888103.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:23.943Z,1528888103.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:24.333Z,1528888104.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:24.351Z,1528888104.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:24.730Z,1528888104.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:24.748Z,1528888104.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:25.133Z,1528888105.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:25.150Z,1528888105.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:25.518Z,1528888105.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:25.546Z,1528888105.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:25.912Z,1528888105.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:25.949Z,1528888105.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:26.311Z,1528888106.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:26.343Z,1528888106.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:26.717Z,1528888106.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:26.746Z,1528888106.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:29.833Z,1528888109.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:29.851Z,1528888109.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:29.988Z,1528888109.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:30.006Z,1528888110.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:30.387Z,1528888110.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:30.405Z,1528888110.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:30.791Z,1528888110.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:30.809Z,1528888110.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:31.163Z,1528888111.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:31.205Z,1528888111.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:31.564Z,1528888111.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:31.598Z,1528888111.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:31.960Z,1528888111.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:31.991Z,1528888111.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:32.384Z,1528888112.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:32.402Z,1528888112.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:32.784Z,1528888112.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:32.802Z,1528888112.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:33.173Z,1528888113.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:33.211Z,1528888113.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:33.568Z,1528888113.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:33.601Z,1528888113.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:33.966Z,1528888113.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:34.005Z,1528888114.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:34.363Z,1528888114.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:34.398Z,1528888114.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:34.764Z,1528888114.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:34.803Z,1528888114.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:34.803Z,1528888114.803 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 154
2018-06-13T11:08:34.803Z,1528888114.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:08:34.809Z,1528888114.809 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:34.809Z,1528888114.809 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 154
2018-06-13T11:08:34.809Z,1528888114.809 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:08:34.811Z,1528888114.811 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:34.811Z,1528888114.811 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 154
2018-06-13T11:08:34.811Z,1528888114.811 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:08:34.893Z,1528888114.893 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:08:34.893Z,1528888114.893 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:08:34.894Z,1528888114.894 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:08:35.159Z,1528888115.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:35.269Z,1528888115.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:08:35.269Z,1528888115.269 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 154
2018-06-13T11:08:35.270Z,1528888115.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:08:35.270Z,1528888115.270 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 154
2018-06-13T11:08:35.270Z,1528888115.270 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:08:35.270Z,1528888115.270 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 154
2018-06-13T11:08:35.585Z,1528888115.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:35.602Z,1528888115.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:08:35.602Z,1528888115.602 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:08:35.603Z,1528888115.603 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:08:35.603Z,1528888115.603 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:08:35.603Z,1528888115.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:08:35.604Z,1528888115.604 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:08:35.604Z,1528888115.604 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:08:35.604Z,1528888115.604 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:08:35.605Z,1528888115.605 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:08:35.989Z,1528888115.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:36.012Z,1528888116.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:08:36.013Z,1528888116.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:36.377Z,1528888116.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:36.413Z,1528888116.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:08:36.414Z,1528888116.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:36.760Z,1528888116.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:36.790Z,1528888116.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:08:36.791Z,1528888116.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:37.166Z,1528888117.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:37.200Z,1528888117.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:08:37.205Z,1528888117.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:37.563Z,1528888117.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:37.593Z,1528888117.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:08:37.594Z,1528888117.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:37.963Z,1528888117.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:37.981Z,1528888117.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:08:37.982Z,1528888117.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:38.378Z,1528888118.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:38.414Z,1528888118.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:08:38.415Z,1528888118.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:38.782Z,1528888118.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:38.812Z,1528888118.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:08:38.812Z,1528888118.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:39.185Z,1528888119.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:39.212Z,1528888119.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:08:39.214Z,1528888119.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:39.567Z,1528888119.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:39.585Z,1528888119.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:08:39.586Z,1528888119.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:39.966Z,1528888119.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:39.983Z,1528888119.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:08:39.984Z,1528888119.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:40.364Z,1528888120.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:40.382Z,1528888120.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:08:40.383Z,1528888120.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:40.770Z,1528888120.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:40.788Z,1528888120.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:08:40.790Z,1528888120.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:41.165Z,1528888121.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:41.183Z,1528888121.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:08:41.184Z,1528888121.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:41.577Z,1528888121.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:41.595Z,1528888121.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:08:41.596Z,1528888121.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:41.978Z,1528888121.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:41.995Z,1528888121.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:08:41.996Z,1528888121.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:42.381Z,1528888122.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:42.403Z,1528888122.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:08:42.404Z,1528888122.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:42.770Z,1528888122.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:42.787Z,1528888122.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:08:42.788Z,1528888122.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:43.167Z,1528888123.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:43.189Z,1528888123.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:08:43.190Z,1528888123.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:43.574Z,1528888123.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:43.591Z,1528888123.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:08:43.592Z,1528888123.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:43.969Z,1528888123.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:43.986Z,1528888123.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:08:43.987Z,1528888123.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:44.378Z,1528888124.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:44.395Z,1528888124.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:08:44.396Z,1528888124.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:44.777Z,1528888124.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:44.794Z,1528888124.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:08:44.795Z,1528888124.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:45.179Z,1528888125.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:45.197Z,1528888125.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:08:45.198Z,1528888125.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:45.570Z,1528888125.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:45.604Z,1528888125.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:08:45.609Z,1528888125.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:45.973Z,1528888125.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:45.990Z,1528888125.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:08:45.991Z,1528888125.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:46.370Z,1528888126.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:46.388Z,1528888126.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:08:46.389Z,1528888126.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:46.768Z,1528888126.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:46.800Z,1528888126.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:08:46.805Z,1528888126.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:47.171Z,1528888127.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:47.189Z,1528888127.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:08:47.190Z,1528888127.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:47.583Z,1528888127.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:47.608Z,1528888127.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:08:47.609Z,1528888127.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:47.982Z,1528888127.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:48.004Z,1528888128.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:08:48.005Z,1528888128.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:48.387Z,1528888128.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:48.404Z,1528888128.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:08:48.405Z,1528888128.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:48.769Z,1528888128.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:48.787Z,1528888128.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:08:48.787Z,1528888128.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:49.174Z,1528888129.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:49.192Z,1528888129.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:08:49.193Z,1528888129.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:49.569Z,1528888129.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:49.594Z,1528888129.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:08:49.595Z,1528888129.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:49.959Z,1528888129.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:49.992Z,1528888129.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:08:49.993Z,1528888129.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:50.384Z,1528888130.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:50.401Z,1528888130.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:08:50.402Z,1528888130.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:50.779Z,1528888130.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:50.796Z,1528888130.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:08:50.797Z,1528888130.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:51.184Z,1528888131.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:51.201Z,1528888131.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:08:51.202Z,1528888131.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:51.568Z,1528888131.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:51.594Z,1528888131.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:08:51.595Z,1528888131.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:51.972Z,1528888131.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:51.989Z,1528888131.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:08:51.990Z,1528888131.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:52.368Z,1528888132.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:52.386Z,1528888132.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:08:52.387Z,1528888132.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:52.769Z,1528888132.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:52.794Z,1528888132.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:08:52.795Z,1528888132.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:53.163Z,1528888133.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:53.207Z,1528888133.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:08:53.208Z,1528888133.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:53.586Z,1528888133.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:53.603Z,1528888133.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:08:53.604Z,1528888133.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:53.983Z,1528888133.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:54.000Z,1528888134.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:08:54.001Z,1528888134.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:54.383Z,1528888134.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:54.408Z,1528888134.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:08:54.409Z,1528888134.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:54.763Z,1528888134.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:54.796Z,1528888134.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T11:08:54.797Z,1528888134.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:55.173Z,1528888135.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:55.195Z,1528888135.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:55.572Z,1528888135.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:55.590Z,1528888135.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:55.963Z,1528888135.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:56.005Z,1528888136.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:56.381Z,1528888136.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:56.400Z,1528888136.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:56.786Z,1528888136.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:56.804Z,1528888136.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:57.185Z,1528888137.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:57.203Z,1528888137.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:57.570Z,1528888137.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:57.594Z,1528888137.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:57.963Z,1528888137.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:57.995Z,1528888137.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:58.363Z,1528888138.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:58.397Z,1528888138.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:58.770Z,1528888138.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:58.794Z,1528888138.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:59.172Z,1528888139.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:59.189Z,1528888139.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:59.579Z,1528888139.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:08:59.606Z,1528888139.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:08:59.988Z,1528888139.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:00.012Z,1528888140.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:00.380Z,1528888140.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:00.400Z,1528888140.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:00.773Z,1528888140.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:00.795Z,1528888140.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:01.163Z,1528888141.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:01.207Z,1528888141.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:01.563Z,1528888141.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:01.597Z,1528888141.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:01.964Z,1528888141.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:01.998Z,1528888141.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:02.382Z,1528888142.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:02.404Z,1528888142.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:02.785Z,1528888142.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:02.812Z,1528888142.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:03.187Z,1528888143.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:03.205Z,1528888143.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:03.563Z,1528888143.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:03.603Z,1528888143.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:03.972Z,1528888143.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:03.991Z,1528888143.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:04.363Z,1528888144.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:04.408Z,1528888144.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:04.764Z,1528888144.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:04.796Z,1528888144.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:05.163Z,1528888145.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:05.203Z,1528888145.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:05.586Z,1528888145.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:05.608Z,1528888145.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:05.983Z,1528888145.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:06.034Z,1528888146.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:06.381Z,1528888146.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:06.434Z,1528888146.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:06.764Z,1528888146.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:06.798Z,1528888146.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:07.164Z,1528888147.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:07.195Z,1528888147.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:07.564Z,1528888147.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:07.608Z,1528888147.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:07.963Z,1528888147.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:08.005Z,1528888148.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:08.386Z,1528888148.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:08.404Z,1528888148.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:08.787Z,1528888148.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:08.806Z,1528888148.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:09.185Z,1528888149.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:09.220Z,1528888149.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:09.563Z,1528888149.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:09.605Z,1528888149.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:09.963Z,1528888149.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:10.011Z,1528888150.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:10.363Z,1528888150.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:10.398Z,1528888150.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:10.763Z,1528888150.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:10.806Z,1528888150.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:11.163Z,1528888151.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:11.212Z,1528888151.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:11.593Z,1528888151.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:11.611Z,1528888151.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:11.986Z,1528888151.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:12.003Z,1528888152.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:12.374Z,1528888152.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:12.416Z,1528888152.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:12.761Z,1528888152.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:12.801Z,1528888152.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:13.164Z,1528888153.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:13.192Z,1528888153.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:13.566Z,1528888153.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:13.609Z,1528888153.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:13.968Z,1528888153.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:13.986Z,1528888153.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:14.378Z,1528888154.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:14.418Z,1528888154.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:14.779Z,1528888154.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:14.817Z,1528888154.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:15.182Z,1528888155.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:15.200Z,1528888155.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:15.567Z,1528888155.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:15.598Z,1528888155.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:15.967Z,1528888155.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:16.009Z,1528888156.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:16.367Z,1528888156.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:16.396Z,1528888156.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:16.767Z,1528888156.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:16.804Z,1528888156.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:17.167Z,1528888157.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:17.225Z,1528888157.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:17.579Z,1528888157.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:17.603Z,1528888157.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:17.978Z,1528888157.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:18.002Z,1528888158.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:18.378Z,1528888158.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:18.419Z,1528888158.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:18.759Z,1528888158.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:18.805Z,1528888158.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:19.167Z,1528888159.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:19.198Z,1528888159.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:19.564Z,1528888159.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:19.598Z,1528888159.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:19.963Z,1528888159.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:19.996Z,1528888159.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:20.380Z,1528888160.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:20.398Z,1528888160.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:20.783Z,1528888160.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:20.803Z,1528888160.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:21.180Z,1528888161.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:21.204Z,1528888161.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:21.563Z,1528888161.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:21.604Z,1528888161.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:21.963Z,1528888161.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:21.991Z,1528888161.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:22.363Z,1528888162.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:22.391Z,1528888162.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:22.763Z,1528888162.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:22.804Z,1528888162.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:23.163Z,1528888163.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:23.204Z,1528888163.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:23.584Z,1528888163.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:23.602Z,1528888163.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:23.983Z,1528888163.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:24.001Z,1528888164.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:24.380Z,1528888164.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:24.402Z,1528888164.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:24.759Z,1528888164.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:24.787Z,1528888164.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:25.167Z,1528888165.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:25.204Z,1528888165.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:25.568Z,1528888165.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:25.600Z,1528888165.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:25.967Z,1528888165.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:26.003Z,1528888166.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:26.384Z,1528888166.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:26.407Z,1528888166.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:26.787Z,1528888166.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:26.805Z,1528888166.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:29.945Z,1528888169.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:29.965Z,1528888169.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:30.089Z,1528888170.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:30.107Z,1528888170.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:30.487Z,1528888170.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:30.505Z,1528888170.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:30.875Z,1528888170.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:30.903Z,1528888170.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:31.291Z,1528888171.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:31.309Z,1528888171.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:31.695Z,1528888171.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:31.713Z,1528888171.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:32.091Z,1528888172.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:32.109Z,1528888172.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:32.486Z,1528888172.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:32.504Z,1528888172.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:32.871Z,1528888172.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:32.907Z,1528888172.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:33.292Z,1528888173.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:33.311Z,1528888173.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:33.695Z,1528888173.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:33.713Z,1528888173.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:34.091Z,1528888174.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:34.110Z,1528888174.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:34.475Z,1528888174.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:34.510Z,1528888174.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:34.875Z,1528888174.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:34.902Z,1528888174.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:35.292Z,1528888175.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:35.310Z,1528888175.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:35.691Z,1528888175.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:35.713Z,1528888175.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:36.092Z,1528888176.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:36.110Z,1528888176.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:36.471Z,1528888176.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:36.508Z,1528888176.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:36.872Z,1528888176.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:36.906Z,1528888176.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:37.275Z,1528888177.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:37.312Z,1528888177.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:37.692Z,1528888177.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:37.710Z,1528888177.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:38.085Z,1528888178.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:38.121Z,1528888178.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:38.491Z,1528888178.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:38.510Z,1528888178.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:38.875Z,1528888178.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:38.908Z,1528888178.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:39.271Z,1528888179.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:39.302Z,1528888179.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:39.680Z,1528888179.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:39.711Z,1528888179.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:40.075Z,1528888180.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:40.112Z,1528888180.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:40.497Z,1528888180.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:40.515Z,1528888180.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:40.885Z,1528888180.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:40.919Z,1528888180.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:41.295Z,1528888181.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:41.321Z,1528888181.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:41.675Z,1528888181.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:41.708Z,1528888181.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:42.076Z,1528888182.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:42.110Z,1528888182.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:42.475Z,1528888182.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:42.493Z,1528888182.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:42.879Z,1528888182.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:42.913Z,1528888182.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:43.279Z,1528888183.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:43.296Z,1528888183.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:43.689Z,1528888183.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:43.723Z,1528888183.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:44.090Z,1528888184.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:44.123Z,1528888184.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:44.489Z,1528888184.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:44.520Z,1528888184.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:44.878Z,1528888184.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:44.896Z,1528888184.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:45.274Z,1528888185.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:45.292Z,1528888185.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:45.678Z,1528888185.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:45.696Z,1528888185.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:46.080Z,1528888186.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:46.117Z,1528888186.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:46.489Z,1528888186.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:46.507Z,1528888186.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:46.889Z,1528888186.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:46.907Z,1528888186.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:47.286Z,1528888187.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:47.304Z,1528888187.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:47.683Z,1528888187.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:47.701Z,1528888187.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:48.082Z,1528888188.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:48.100Z,1528888188.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:48.479Z,1528888188.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:48.504Z,1528888188.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:48.882Z,1528888188.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:48.900Z,1528888188.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:49.283Z,1528888189.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:49.302Z,1528888189.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:49.693Z,1528888189.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:49.712Z,1528888189.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:50.089Z,1528888190.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:50.107Z,1528888190.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:50.486Z,1528888190.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:50.508Z,1528888190.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:50.884Z,1528888190.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:50.903Z,1528888190.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:51.282Z,1528888191.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:51.300Z,1528888191.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:51.682Z,1528888191.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:51.700Z,1528888191.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:52.079Z,1528888192.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:52.107Z,1528888192.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:52.489Z,1528888192.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:52.507Z,1528888192.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:52.893Z,1528888192.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:52.911Z,1528888192.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:53.286Z,1528888193.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:53.308Z,1528888193.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:53.682Z,1528888193.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:53.700Z,1528888193.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:54.084Z,1528888194.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:54.102Z,1528888194.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:54.483Z,1528888194.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:54.502Z,1528888194.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:54.882Z,1528888194.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:54.900Z,1528888194.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:55.279Z,1528888195.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:55.302Z,1528888195.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:55.690Z,1528888195.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:55.716Z,1528888195.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:56.090Z,1528888196.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:56.108Z,1528888196.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:56.490Z,1528888196.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:56.508Z,1528888196.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:56.879Z,1528888196.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:56.903Z,1528888196.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:57.282Z,1528888197.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:57.300Z,1528888197.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:57.684Z,1528888197.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:57.702Z,1528888197.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:58.085Z,1528888198.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:58.103Z,1528888198.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:58.491Z,1528888198.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:58.509Z,1528888198.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:58.894Z,1528888198.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:58.912Z,1528888198.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:59.292Z,1528888199.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:59.310Z,1528888199.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:09:59.685Z,1528888199.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:09:59.703Z,1528888199.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:00.085Z,1528888200.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:00.111Z,1528888200.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:00.487Z,1528888200.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:00.505Z,1528888200.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:00.883Z,1528888200.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:00.901Z,1528888200.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:01.286Z,1528888201.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:01.304Z,1528888201.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:01.691Z,1528888201.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:01.716Z,1528888201.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:02.096Z,1528888202.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:02.114Z,1528888202.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:02.493Z,1528888202.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:02.512Z,1528888202.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:02.885Z,1528888202.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:02.903Z,1528888202.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:03.285Z,1528888203.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:03.303Z,1528888203.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:03.683Z,1528888203.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:03.711Z,1528888203.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:04.083Z,1528888204.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:04.108Z,1528888204.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:04.492Z,1528888204.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:04.510Z,1528888204.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:04.895Z,1528888204.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:04.916Z,1528888204.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:05.295Z,1528888205.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:05.313Z,1528888205.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:05.682Z,1528888205.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:05.702Z,1528888205.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:06.084Z,1528888206.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:06.104Z,1528888206.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:06.482Z,1528888206.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:06.500Z,1528888206.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:06.878Z,1528888206.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:06.916Z,1528888206.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:07.281Z,1528888207.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:07.332Z,1528888207.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:07.691Z,1528888207.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:07.710Z,1528888207.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:08.091Z,1528888208.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:08.109Z,1528888208.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:08.492Z,1528888208.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:08.511Z,1528888208.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:08.882Z,1528888208.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:08.907Z,1528888208.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:09.282Z,1528888209.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:09.300Z,1528888209.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:09.685Z,1528888209.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:09.703Z,1528888209.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:10.082Z,1528888210.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:10.139Z,1528888210.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:10.493Z,1528888210.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:10.535Z,1528888210.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:10.894Z,1528888210.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:10.912Z,1528888210.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:11.290Z,1528888211.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:11.312Z,1528888211.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:11.678Z,1528888211.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:11.712Z,1528888211.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:12.079Z,1528888212.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:12.108Z,1528888212.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:12.485Z,1528888212.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:12.503Z,1528888212.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:12.885Z,1528888212.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:12.903Z,1528888212.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:13.279Z,1528888213.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:13.334Z,1528888213.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:13.692Z,1528888213.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:13.736Z,1528888213.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:14.094Z,1528888214.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:14.113Z,1528888214.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:14.490Z,1528888214.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:14.513Z,1528888214.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:14.879Z,1528888214.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:14.916Z,1528888214.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:15.277Z,1528888215.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:15.300Z,1528888215.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:15.680Z,1528888215.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:15.706Z,1528888215.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:16.083Z,1528888216.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:16.101Z,1528888216.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:16.490Z,1528888216.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:16.535Z,1528888216.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:16.891Z,1528888216.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:16.936Z,1528888216.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:17.293Z,1528888217.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:17.311Z,1528888217.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:17.682Z,1528888217.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:17.700Z,1528888217.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:18.081Z,1528888218.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:18.116Z,1528888218.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:18.481Z,1528888218.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:18.504Z,1528888218.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:18.878Z,1528888218.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:18.902Z,1528888218.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:19.280Z,1528888219.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:19.306Z,1528888219.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:19.690Z,1528888219.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:19.739Z,1528888219.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:20.090Z,1528888220.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:20.113Z,1528888220.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:20.492Z,1528888220.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:20.510Z,1528888220.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:20.881Z,1528888220.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:20.907Z,1528888220.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:21.278Z,1528888221.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:21.316Z,1528888221.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:21.682Z,1528888221.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:21.705Z,1528888221.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:22.079Z,1528888222.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:22.115Z,1528888222.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:22.494Z,1528888222.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:22.512Z,1528888222.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:22.890Z,1528888222.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:22.939Z,1528888222.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:23.290Z,1528888223.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:23.314Z,1528888223.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:23.678Z,1528888223.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:23.702Z,1528888223.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:24.080Z,1528888224.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:24.106Z,1528888224.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:24.485Z,1528888224.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:24.538Z,1528888224.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:24.882Z,1528888224.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:24.902Z,1528888224.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:25.285Z,1528888225.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:25.307Z,1528888225.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:25.692Z,1528888225.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:25.717Z,1528888225.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:28.809Z,1528888228.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:28.840Z,1528888228.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:28.970Z,1528888228.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:29.005Z,1528888229.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:29.359Z,1528888229.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:29.397Z,1528888229.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:29.756Z,1528888229.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:29.775Z,1528888229.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:30.159Z,1528888230.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:30.176Z,1528888230.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:30.569Z,1528888230.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:30.607Z,1528888230.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:30.969Z,1528888230.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:30.987Z,1528888230.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:31.369Z,1528888231.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:31.387Z,1528888231.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:31.760Z,1528888231.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:31.779Z,1528888231.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:32.160Z,1528888232.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:32.178Z,1528888232.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:32.563Z,1528888232.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:32.581Z,1528888232.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:32.960Z,1528888232.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:32.978Z,1528888232.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:33.368Z,1528888233.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:33.386Z,1528888233.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:33.769Z,1528888233.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:33.792Z,1528888233.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:34.173Z,1528888234.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:34.191Z,1528888234.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:34.565Z,1528888234.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:34.583Z,1528888234.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:34.961Z,1528888234.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:34.979Z,1528888234.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:35.359Z,1528888235.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:35.390Z,1528888235.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:35.769Z,1528888235.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:35.787Z,1528888235.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:36.169Z,1528888236.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:36.187Z,1528888236.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:36.567Z,1528888236.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:36.592Z,1528888236.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:36.958Z,1528888236.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:36.976Z,1528888236.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:37.364Z,1528888237.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:37.382Z,1528888237.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:37.762Z,1528888237.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:37.780Z,1528888237.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:38.162Z,1528888238.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:38.180Z,1528888238.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:38.571Z,1528888238.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:38.589Z,1528888238.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:38.973Z,1528888238.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:38.992Z,1528888238.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:39.371Z,1528888239.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:39.389Z,1528888239.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:39.759Z,1528888239.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:39.782Z,1528888239.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:40.159Z,1528888240.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:40.191Z,1528888240.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:40.565Z,1528888240.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:40.583Z,1528888240.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:40.965Z,1528888240.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:40.983Z,1528888240.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:41.359Z,1528888241.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:41.384Z,1528888241.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:41.770Z,1528888241.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:41.789Z,1528888241.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:42.169Z,1528888242.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:42.191Z,1528888242.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:42.570Z,1528888242.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:42.592Z,1528888242.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:42.962Z,1528888242.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:42.980Z,1528888242.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:43.359Z,1528888243.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:43.388Z,1528888243.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:43.765Z,1528888243.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:43.783Z,1528888243.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:44.163Z,1528888244.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:44.181Z,1528888244.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:44.574Z,1528888244.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:44.600Z,1528888244.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:44.975Z,1528888244.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:44.993Z,1528888244.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:45.372Z,1528888245.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:45.391Z,1528888245.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:45.765Z,1528888245.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:45.783Z,1528888245.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:46.155Z,1528888246.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:46.188Z,1528888246.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:46.551Z,1528888246.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:46.580Z,1528888246.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:46.966Z,1528888246.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:46.984Z,1528888246.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:47.364Z,1528888247.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:47.382Z,1528888247.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:47.776Z,1528888247.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:47.795Z,1528888247.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:48.180Z,1528888248.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:48.198Z,1528888248.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:48.577Z,1528888248.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:48.595Z,1528888248.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:48.955Z,1528888248.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:48.984Z,1528888248.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:49.368Z,1528888249.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:49.386Z,1528888249.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:49.756Z,1528888249.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:49.786Z,1528888249.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:50.154Z,1528888250.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:50.186Z,1528888250.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:50.574Z,1528888250.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:50.612Z,1528888250.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:50.977Z,1528888250.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:50.995Z,1528888250.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:51.378Z,1528888251.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:51.396Z,1528888251.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:51.757Z,1528888251.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:51.789Z,1528888251.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:52.156Z,1528888252.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:52.190Z,1528888252.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:52.557Z,1528888252.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:52.587Z,1528888252.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:52.960Z,1528888252.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:52.993Z,1528888252.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:53.356Z,1528888253.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:53.387Z,1528888253.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:53.772Z,1528888253.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:53.791Z,1528888253.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:54.174Z,1528888254.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:54.192Z,1528888254.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:54.575Z,1528888254.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:54.593Z,1528888254.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:54.951Z,1528888254.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:54.988Z,1528888254.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:55.356Z,1528888255.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:55.392Z,1528888255.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:55.762Z,1528888255.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:55.790Z,1528888255.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:56.159Z,1528888256.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:56.187Z,1528888256.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:56.574Z,1528888256.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:56.592Z,1528888256.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:56.968Z,1528888256.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:57.001Z,1528888257.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:57.366Z,1528888257.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:57.394Z,1528888257.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:57.760Z,1528888257.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:57.792Z,1528888257.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:58.154Z,1528888258.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:58.188Z,1528888258.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:58.552Z,1528888258.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:58.600Z,1528888258.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:58.958Z,1528888258.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:58.995Z,1528888258.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:59.359Z,1528888259.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:59.391Z,1528888259.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:10:59.767Z,1528888259.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:10:59.807Z,1528888259.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:00.174Z,1528888260.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:00.203Z,1528888260.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:00.570Z,1528888260.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:00.604Z,1528888260.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:00.958Z,1528888260.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:00.976Z,1528888260.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:01.358Z,1528888261.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:01.403Z,1528888261.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:01.759Z,1528888261.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:01.805Z,1528888261.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:02.156Z,1528888262.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:02.174Z,1528888262.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:02.573Z,1528888262.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:02.607Z,1528888262.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:02.970Z,1528888262.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:03.007Z,1528888263.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:03.368Z,1528888263.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:03.394Z,1528888263.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:03.760Z,1528888263.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:03.778Z,1528888263.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:04.164Z,1528888264.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:04.182Z,1528888264.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:04.560Z,1528888264.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:04.604Z,1528888264.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:04.960Z,1528888264.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:04.983Z,1528888264.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:05.363Z,1528888265.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:05.380Z,1528888265.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:05.769Z,1528888265.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:05.787Z,1528888265.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:06.169Z,1528888266.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:06.216Z,1528888266.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:06.566Z,1528888266.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:06.610Z,1528888266.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:06.963Z,1528888266.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:06.982Z,1528888266.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:07.362Z,1528888267.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:07.391Z,1528888267.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:07.760Z,1528888267.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:07.792Z,1528888267.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:08.160Z,1528888268.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:08.183Z,1528888268.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:08.568Z,1528888268.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:08.586Z,1528888268.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:08.970Z,1528888268.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:08.988Z,1528888268.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:09.370Z,1528888269.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:09.413Z,1528888269.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:09.758Z,1528888269.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:09.792Z,1528888269.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:10.161Z,1528888270.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:10.182Z,1528888270.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:10.563Z,1528888270.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:10.580Z,1528888270.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:10.960Z,1528888270.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:11.009Z,1528888271.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:11.359Z,1528888271.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:11.383Z,1528888271.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:11.772Z,1528888271.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:11.790Z,1528888271.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:12.171Z,1528888272.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:12.189Z,1528888272.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:12.565Z,1528888272.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:12.609Z,1528888272.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:12.961Z,1528888272.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:12.987Z,1528888272.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:13.360Z,1528888273.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:13.382Z,1528888273.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:13.763Z,1528888273.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:13.788Z,1528888273.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:14.160Z,1528888274.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:14.206Z,1528888274.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:14.569Z,1528888274.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:14.592Z,1528888274.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:14.971Z,1528888274.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:15.016Z,1528888275.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:15.372Z,1528888275.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:15.390Z,1528888275.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:15.761Z,1528888275.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:15.811Z,1528888275.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:16.161Z,1528888276.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:16.189Z,1528888276.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:16.562Z,1528888276.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:16.586Z,1528888276.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:16.954Z,1528888276.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:16.982Z,1528888276.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:17.359Z,1528888277.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:17.383Z,1528888277.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:17.771Z,1528888277.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:17.794Z,1528888277.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:18.170Z,1528888278.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:18.193Z,1528888278.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:18.572Z,1528888278.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:18.596Z,1528888278.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:18.963Z,1528888278.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:19.015Z,1528888279.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:19.361Z,1528888279.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:19.379Z,1528888279.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:19.759Z,1528888279.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:19.788Z,1528888279.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:20.162Z,1528888280.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:20.184Z,1528888280.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:20.570Z,1528888280.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:20.588Z,1528888280.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:20.971Z,1528888280.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:20.992Z,1528888280.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:21.371Z,1528888281.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:21.394Z,1528888281.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:21.761Z,1528888281.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:21.784Z,1528888281.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:22.159Z,1528888282.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:22.183Z,1528888282.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:22.562Z,1528888282.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:22.580Z,1528888282.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:22.959Z,1528888282.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:22.988Z,1528888282.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:23.359Z,1528888283.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:23.387Z,1528888283.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:23.771Z,1528888283.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:23.789Z,1528888283.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:24.170Z,1528888284.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:24.194Z,1528888284.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:24.571Z,1528888284.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:24.594Z,1528888284.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:24.963Z,1528888284.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:24.986Z,1528888284.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:25.359Z,1528888285.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:25.389Z,1528888285.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:25.756Z,1528888285.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:25.786Z,1528888285.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:26.167Z,1528888286.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:26.196Z,1528888286.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:26.578Z,1528888286.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:26.599Z,1528888286.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:26.980Z,1528888286.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:27.029Z,1528888287.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:30.078Z,1528888290.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:30.096Z,1528888290.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:30.100Z,1528888290.100 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T11:06:28.5Z
2018-06-13T11:11:30.100Z,1528888290.100 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T11:11:30.100Z,1528888290.100 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T11:11:30.228Z,1528888290.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:30.246Z,1528888290.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:31.496Z,1528888291.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:31.538Z,1528888291.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:31.648Z,1528888291.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:31.692Z,1528888291.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:32.073Z,1528888292.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:32.091Z,1528888292.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:32.475Z,1528888292.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:32.506Z,1528888292.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:32.865Z,1528888292.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:32.901Z,1528888292.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:33.255Z,1528888293.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:33.291Z,1528888293.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:33.655Z,1528888293.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:33.690Z,1528888293.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:36.779Z,1528888296.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:36.797Z,1528888296.797 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:36.797Z,1528888296.797 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 155
2018-06-13T11:11:36.797Z,1528888296.797 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:11:36.799Z,1528888296.799 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:36.799Z,1528888296.799 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 155
2018-06-13T11:11:36.799Z,1528888296.799 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:11:36.801Z,1528888296.801 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:36.801Z,1528888296.801 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 155
2018-06-13T11:11:36.801Z,1528888296.801 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:11:36.877Z,1528888296.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:11:36.877Z,1528888296.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:11:36.878Z,1528888296.878 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:11:36.886Z,1528888296.886 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0180.lzma
2018-06-13T11:11:36.911Z,1528888296.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:37.029Z,1528888297.029 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:11:37.029Z,1528888297.029 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 155
2018-06-13T11:11:37.030Z,1528888297.030 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:11:37.030Z,1528888297.030 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 155
2018-06-13T11:11:37.030Z,1528888297.030 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:11:37.030Z,1528888297.030 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 155
2018-06-13T11:11:37.321Z,1528888297.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:37.351Z,1528888297.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:11:37.351Z,1528888297.351 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:11:37.351Z,1528888297.351 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:11:37.352Z,1528888297.352 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:11:37.352Z,1528888297.352 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:11:37.357Z,1528888297.357 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:11:37.357Z,1528888297.357 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:11:37.358Z,1528888297.358 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:11:37.358Z,1528888297.358 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:11:37.686Z,1528888297.686 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0180.lzma.bak
2018-06-13T11:11:37.686Z,1528888297.686 [DataOverHttps](INFO): SBD MOMSN=8329115
2018-06-13T11:11:37.726Z,1528888297.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:37.764Z,1528888297.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T11:11:37.765Z,1528888297.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:39.630Z,1528888299.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:39.671Z,1528888299.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T11:11:39.672Z,1528888299.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:39.790Z,1528888299.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:39.840Z,1528888299.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T11:11:39.841Z,1528888299.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:42.940Z,1528888302.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:42.968Z,1528888302.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T11:11:42.969Z,1528888302.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:43.079Z,1528888303.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:43.109Z,1528888303.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T11:11:43.110Z,1528888303.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:43.498Z,1528888303.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:43.527Z,1528888303.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T11:11:43.527Z,1528888303.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:43.909Z,1528888303.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:43.932Z,1528888303.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T11:11:43.933Z,1528888303.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:44.293Z,1528888304.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:44.323Z,1528888304.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T11:11:44.324Z,1528888304.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:44.688Z,1528888304.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:44.725Z,1528888304.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T11:11:44.726Z,1528888304.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:45.087Z,1528888305.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:45.129Z,1528888305.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T11:11:45.130Z,1528888305.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:45.493Z,1528888305.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:45.531Z,1528888305.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T11:11:45.532Z,1528888305.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:45.901Z,1528888305.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:45.939Z,1528888305.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T11:11:45.940Z,1528888305.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:50.578Z,1528888310.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:50.600Z,1528888310.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T11:11:50.601Z,1528888310.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:50.689Z,1528888310.689 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0181.lzma
2018-06-13T11:11:50.727Z,1528888310.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:50.758Z,1528888310.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:11:50.759Z,1528888310.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:51.113Z,1528888311.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:51.136Z,1528888311.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-06-13T11:11:51.137Z,1528888311.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:51.482Z,1528888311.482 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0181.lzma.bak
2018-06-13T11:11:51.482Z,1528888311.482 [DataOverHttps](INFO): SBD MOMSN=8329117
2018-06-13T11:11:51.527Z,1528888311.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:51.544Z,1528888311.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T11:11:51.545Z,1528888311.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:53.387Z,1528888313.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:53.421Z,1528888313.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T11:11:53.422Z,1528888313.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:53.426Z,1528888313.426 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T11:11:53.426Z,1528888313.426 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T11:11:53.426Z,1528888313.426 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T11:11:53.547Z,1528888313.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:53.583Z,1528888313.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:11:53.584Z,1528888313.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:53.968Z,1528888313.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:53.986Z,1528888313.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:11:53.987Z,1528888313.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:57.089Z,1528888317.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:57.107Z,1528888317.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:57.273Z,1528888317.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:57.308Z,1528888317.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:57.648Z,1528888317.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:57.680Z,1528888317.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:58.046Z,1528888318.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:58.078Z,1528888318.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:58.443Z,1528888318.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:58.478Z,1528888318.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:58.858Z,1528888318.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:58.890Z,1528888318.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:59.253Z,1528888319.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:59.291Z,1528888319.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:11:59.654Z,1528888319.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:11:59.681Z,1528888319.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:00.046Z,1528888320.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:00.055Z,1528888320.055 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T11:12:00.055Z,1528888320.055 [BPC1] Communications Fault, FailCount= 3
2018-06-13T11:12:00.055Z,1528888320.055 [BPC1](ERROR): Communications Fault
2018-06-13T11:12:00.066Z,1528888320.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:00.157Z,1528888320.157 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T11:12:00.444Z,1528888320.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:00.463Z,1528888320.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:00.846Z,1528888320.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:00.864Z,1528888320.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:01.248Z,1528888321.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:01.266Z,1528888321.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:01.349Z,1528888321.349 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T11:12:01.349Z,1528888321.349 [BPC1] No Fault, FailCount= 3
2018-06-13T11:12:01.650Z,1528888321.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:01.728Z,1528888321.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:02.057Z,1528888322.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:02.076Z,1528888322.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:02.457Z,1528888322.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:02.480Z,1528888322.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:02.843Z,1528888322.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:02.875Z,1528888322.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:03.248Z,1528888323.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:03.265Z,1528888323.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:03.648Z,1528888323.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:03.666Z,1528888323.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:04.046Z,1528888324.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:04.063Z,1528888324.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:04.448Z,1528888324.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:04.465Z,1528888324.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:04.858Z,1528888324.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:04.876Z,1528888324.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:05.253Z,1528888325.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:05.271Z,1528888325.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:05.653Z,1528888325.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:05.671Z,1528888325.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:06.048Z,1528888326.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:06.066Z,1528888326.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:06.448Z,1528888326.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:06.472Z,1528888326.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:06.848Z,1528888326.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:06.869Z,1528888326.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:07.248Z,1528888327.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:07.266Z,1528888327.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:07.653Z,1528888327.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:07.671Z,1528888327.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:08.057Z,1528888328.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:08.075Z,1528888328.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:08.457Z,1528888328.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:08.475Z,1528888328.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:08.848Z,1528888328.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:08.866Z,1528888328.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:09.248Z,1528888329.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:09.266Z,1528888329.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:09.649Z,1528888329.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:09.666Z,1528888329.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:10.045Z,1528888330.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:10.068Z,1528888330.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:10.448Z,1528888330.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:10.466Z,1528888330.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:10.857Z,1528888330.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:10.875Z,1528888330.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:11.257Z,1528888331.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:11.275Z,1528888331.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:11.653Z,1528888331.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:11.672Z,1528888331.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:12.048Z,1528888332.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:12.065Z,1528888332.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:12.448Z,1528888332.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:12.466Z,1528888332.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:12.848Z,1528888332.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:12.868Z,1528888332.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:13.248Z,1528888333.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:13.265Z,1528888333.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:13.654Z,1528888333.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:13.672Z,1528888333.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:14.057Z,1528888334.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:14.075Z,1528888334.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:14.457Z,1528888334.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:14.480Z,1528888334.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:14.849Z,1528888334.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:14.866Z,1528888334.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:15.247Z,1528888335.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:15.277Z,1528888335.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:15.645Z,1528888335.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:15.668Z,1528888335.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:16.049Z,1528888336.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:16.067Z,1528888336.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:16.448Z,1528888336.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:16.471Z,1528888336.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:16.858Z,1528888336.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:16.876Z,1528888336.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:17.258Z,1528888337.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:17.280Z,1528888337.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:17.658Z,1528888337.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:17.675Z,1528888337.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:18.049Z,1528888338.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:18.067Z,1528888338.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:18.481Z,1528888338.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:18.506Z,1528888338.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:18.850Z,1528888338.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:18.867Z,1528888338.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:19.251Z,1528888339.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:19.268Z,1528888339.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:19.658Z,1528888339.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:19.676Z,1528888339.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:20.058Z,1528888340.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:20.080Z,1528888340.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:20.457Z,1528888340.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:20.480Z,1528888340.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:20.849Z,1528888340.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:20.867Z,1528888340.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:21.247Z,1528888341.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:21.272Z,1528888341.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:21.654Z,1528888341.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:21.672Z,1528888341.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:22.055Z,1528888342.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:22.200Z,1528888342.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:22.447Z,1528888342.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:22.583Z,1528888342.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:22.880Z,1528888342.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:22.898Z,1528888342.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:23.264Z,1528888343.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:23.282Z,1528888343.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:23.661Z,1528888343.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:23.695Z,1528888343.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:24.044Z,1528888344.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:24.091Z,1528888344.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:24.443Z,1528888344.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:24.461Z,1528888344.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:24.843Z,1528888344.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:24.860Z,1528888344.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:25.241Z,1528888345.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:25.259Z,1528888345.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:25.665Z,1528888345.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:25.698Z,1528888345.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:26.058Z,1528888346.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:26.076Z,1528888346.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:26.457Z,1528888346.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:26.475Z,1528888346.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:26.848Z,1528888346.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:26.866Z,1528888346.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:27.247Z,1528888347.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:27.265Z,1528888347.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:27.650Z,1528888347.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:27.667Z,1528888347.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:28.048Z,1528888348.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:28.067Z,1528888348.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:28.448Z,1528888348.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:28.472Z,1528888348.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:28.862Z,1528888348.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:28.901Z,1528888348.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:29.257Z,1528888349.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:29.275Z,1528888349.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:29.654Z,1528888349.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:29.671Z,1528888349.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:30.050Z,1528888350.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:30.067Z,1528888350.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:30.448Z,1528888350.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:30.466Z,1528888350.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:30.849Z,1528888350.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:30.872Z,1528888350.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:31.250Z,1528888351.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:31.268Z,1528888351.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:31.654Z,1528888351.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:31.672Z,1528888351.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:32.057Z,1528888352.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:32.075Z,1528888352.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:32.457Z,1528888352.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:32.475Z,1528888352.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:32.849Z,1528888352.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:32.867Z,1528888352.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:33.249Z,1528888353.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:33.272Z,1528888353.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:33.648Z,1528888353.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:33.665Z,1528888353.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:34.051Z,1528888354.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:34.069Z,1528888354.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:34.450Z,1528888354.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:34.472Z,1528888354.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:34.858Z,1528888354.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:34.884Z,1528888354.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:35.260Z,1528888355.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:35.278Z,1528888355.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:35.661Z,1528888355.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:35.679Z,1528888355.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:36.050Z,1528888356.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:36.080Z,1528888356.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:36.440Z,1528888356.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:36.470Z,1528888356.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:36.850Z,1528888356.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:36.869Z,1528888356.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:37.251Z,1528888357.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:37.269Z,1528888357.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:37.662Z,1528888357.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:37.684Z,1528888357.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:38.064Z,1528888358.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:38.082Z,1528888358.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:38.464Z,1528888358.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:38.488Z,1528888358.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:38.839Z,1528888358.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:38.867Z,1528888358.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:39.243Z,1528888359.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:39.277Z,1528888359.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:39.643Z,1528888359.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:39.674Z,1528888359.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:40.040Z,1528888360.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:40.077Z,1528888360.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:40.443Z,1528888360.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:40.471Z,1528888360.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:40.864Z,1528888360.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:40.883Z,1528888360.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:41.258Z,1528888361.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:41.276Z,1528888361.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:41.659Z,1528888361.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:41.677Z,1528888361.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:42.043Z,1528888362.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:42.072Z,1528888362.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:42.439Z,1528888362.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:42.475Z,1528888362.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:42.844Z,1528888362.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:42.870Z,1528888362.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:43.239Z,1528888363.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:43.282Z,1528888363.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:43.659Z,1528888363.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:43.677Z,1528888363.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:44.063Z,1528888364.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:44.081Z,1528888364.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:44.464Z,1528888364.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:44.483Z,1528888364.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:44.839Z,1528888364.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:44.871Z,1528888364.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:45.244Z,1528888365.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:45.271Z,1528888365.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:45.643Z,1528888365.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:45.672Z,1528888365.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:46.040Z,1528888366.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:46.075Z,1528888366.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:46.443Z,1528888366.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:46.470Z,1528888366.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:46.864Z,1528888366.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:46.882Z,1528888366.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:47.261Z,1528888367.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:47.278Z,1528888367.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:47.659Z,1528888367.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:47.677Z,1528888367.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:48.043Z,1528888368.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:48.072Z,1528888368.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:48.443Z,1528888368.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:48.470Z,1528888368.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:48.843Z,1528888368.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:48.871Z,1528888368.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:49.243Z,1528888369.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:49.272Z,1528888369.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:49.659Z,1528888369.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:49.677Z,1528888369.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:50.067Z,1528888370.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:50.085Z,1528888370.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:50.464Z,1528888370.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:50.488Z,1528888370.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:50.839Z,1528888370.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:50.875Z,1528888370.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:51.243Z,1528888371.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:51.276Z,1528888371.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:51.643Z,1528888371.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:51.671Z,1528888371.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:52.040Z,1528888372.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:52.070Z,1528888372.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:52.443Z,1528888372.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:52.469Z,1528888372.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:52.863Z,1528888372.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:52.881Z,1528888372.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:53.263Z,1528888373.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:53.281Z,1528888373.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:53.659Z,1528888373.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:53.677Z,1528888373.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:54.047Z,1528888374.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:54.077Z,1528888374.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:57.276Z,1528888377.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:57.295Z,1528888377.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:57.435Z,1528888377.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:57.472Z,1528888377.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:57.841Z,1528888377.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:57.867Z,1528888377.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:58.245Z,1528888378.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:58.271Z,1528888378.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:58.641Z,1528888378.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:58.667Z,1528888378.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:59.028Z,1528888379.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:59.068Z,1528888379.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:59.429Z,1528888379.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:59.447Z,1528888379.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:12:59.831Z,1528888379.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:12:59.856Z,1528888379.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:00.229Z,1528888380.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:00.252Z,1528888380.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:00.641Z,1528888380.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:00.659Z,1528888380.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:01.041Z,1528888381.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:01.059Z,1528888381.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:01.441Z,1528888381.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:01.459Z,1528888381.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:01.834Z,1528888381.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:01.852Z,1528888381.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:02.234Z,1528888382.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:02.292Z,1528888382.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:02.642Z,1528888382.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:02.660Z,1528888382.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:03.037Z,1528888383.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:03.055Z,1528888383.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:03.438Z,1528888383.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:03.455Z,1528888383.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:03.832Z,1528888383.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:03.866Z,1528888383.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:04.236Z,1528888384.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:04.255Z,1528888384.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:04.638Z,1528888384.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:04.657Z,1528888384.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:05.041Z,1528888385.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:05.060Z,1528888385.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:05.439Z,1528888385.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:05.457Z,1528888385.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:05.834Z,1528888385.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:05.852Z,1528888385.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:06.238Z,1528888386.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:06.256Z,1528888386.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:06.638Z,1528888386.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:06.657Z,1528888386.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:07.041Z,1528888387.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:07.060Z,1528888387.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:07.441Z,1528888387.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:07.460Z,1528888387.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:07.834Z,1528888387.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:07.852Z,1528888387.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:08.235Z,1528888388.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:08.260Z,1528888388.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:08.641Z,1528888388.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:08.695Z,1528888388.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:09.041Z,1528888389.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:09.059Z,1528888389.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:09.438Z,1528888389.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:09.456Z,1528888389.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:09.832Z,1528888389.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:09.863Z,1528888389.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:10.238Z,1528888390.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:10.260Z,1528888390.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:10.642Z,1528888390.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:10.660Z,1528888390.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:11.043Z,1528888391.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:11.061Z,1528888391.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:11.440Z,1528888391.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:11.459Z,1528888391.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:11.831Z,1528888391.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:11.855Z,1528888391.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:12.232Z,1528888392.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:12.254Z,1528888392.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:12.644Z,1528888392.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:12.662Z,1528888392.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:13.047Z,1528888393.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:13.065Z,1528888393.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:13.448Z,1528888393.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:13.466Z,1528888393.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:13.824Z,1528888393.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:13.859Z,1528888393.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:14.238Z,1528888394.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:14.264Z,1528888394.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:14.654Z,1528888394.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:14.672Z,1528888394.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:15.048Z,1528888395.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:15.072Z,1528888395.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:15.443Z,1528888395.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:15.461Z,1528888395.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:15.828Z,1528888395.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:15.858Z,1528888395.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:16.227Z,1528888396.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:16.269Z,1528888396.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:16.644Z,1528888396.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:16.662Z,1528888396.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:17.046Z,1528888397.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:17.089Z,1528888397.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:17.444Z,1528888397.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:17.462Z,1528888397.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:17.828Z,1528888397.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:17.864Z,1528888397.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:18.231Z,1528888398.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:18.261Z,1528888398.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:18.644Z,1528888398.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:18.662Z,1528888398.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:19.046Z,1528888399.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:19.076Z,1528888399.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:19.449Z,1528888399.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:19.467Z,1528888399.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:19.828Z,1528888399.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:19.863Z,1528888399.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:20.229Z,1528888400.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:20.263Z,1528888400.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:20.653Z,1528888400.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:20.671Z,1528888400.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:21.037Z,1528888401.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:21.076Z,1528888401.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:21.437Z,1528888401.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:21.482Z,1528888401.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:21.828Z,1528888401.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:21.882Z,1528888401.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:22.231Z,1528888402.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:22.271Z,1528888402.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:22.637Z,1528888402.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:22.675Z,1528888402.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:23.045Z,1528888403.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:23.075Z,1528888403.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:23.445Z,1528888403.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:23.473Z,1528888403.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:23.832Z,1528888403.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:23.850Z,1528888403.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:24.231Z,1528888404.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:24.250Z,1528888404.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:24.637Z,1528888404.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:24.656Z,1528888404.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:25.045Z,1528888405.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:25.079Z,1528888405.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:25.441Z,1528888405.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:25.460Z,1528888405.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:25.833Z,1528888405.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:25.852Z,1528888405.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:26.235Z,1528888406.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:26.254Z,1528888406.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:26.635Z,1528888406.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:26.654Z,1528888406.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:27.039Z,1528888407.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:27.057Z,1528888407.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:27.441Z,1528888407.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:27.459Z,1528888407.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:27.842Z,1528888407.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:27.860Z,1528888407.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:28.235Z,1528888408.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:28.253Z,1528888408.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:28.628Z,1528888408.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:28.671Z,1528888408.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:29.036Z,1528888409.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:29.055Z,1528888409.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:29.436Z,1528888409.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:29.454Z,1528888409.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:29.840Z,1528888409.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:29.858Z,1528888409.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:30.245Z,1528888410.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:30.263Z,1528888410.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:30.642Z,1528888410.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:30.660Z,1528888410.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:31.037Z,1528888411.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:31.055Z,1528888411.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:31.432Z,1528888411.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:31.460Z,1528888411.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:31.835Z,1528888411.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:31.854Z,1528888411.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:32.239Z,1528888412.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:32.258Z,1528888412.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:32.635Z,1528888412.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:32.660Z,1528888412.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:33.045Z,1528888413.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:33.068Z,1528888413.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:33.446Z,1528888413.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:33.472Z,1528888413.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:33.849Z,1528888413.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:33.872Z,1528888413.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:34.238Z,1528888414.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:34.264Z,1528888414.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:34.627Z,1528888414.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:34.673Z,1528888414.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:35.028Z,1528888415.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:35.067Z,1528888415.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:35.423Z,1528888415.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:35.464Z,1528888415.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:35.838Z,1528888415.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:35.876Z,1528888415.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:36.252Z,1528888416.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:36.271Z,1528888416.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:36.633Z,1528888416.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:36.662Z,1528888416.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:37.027Z,1528888417.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:37.061Z,1528888417.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:37.428Z,1528888417.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:37.462Z,1528888417.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:37.827Z,1528888417.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:37.845Z,1528888417.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:38.228Z,1528888418.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:38.246Z,1528888418.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:38.630Z,1528888418.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:38.649Z,1528888418.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:39.037Z,1528888419.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:39.055Z,1528888419.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:39.441Z,1528888419.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:39.459Z,1528888419.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:39.841Z,1528888419.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:39.859Z,1528888419.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:40.233Z,1528888420.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:40.251Z,1528888420.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:40.632Z,1528888420.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:40.650Z,1528888420.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:41.032Z,1528888421.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:41.066Z,1528888421.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:41.427Z,1528888421.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:41.451Z,1528888421.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:41.838Z,1528888421.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:41.860Z,1528888421.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:42.246Z,1528888422.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:42.281Z,1528888422.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:42.639Z,1528888422.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:42.657Z,1528888422.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:43.031Z,1528888423.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:43.062Z,1528888423.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:43.434Z,1528888423.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:43.452Z,1528888423.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:43.827Z,1528888423.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:43.852Z,1528888423.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:44.237Z,1528888424.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:44.255Z,1528888424.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:44.634Z,1528888424.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:44.652Z,1528888424.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:45.042Z,1528888425.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:45.060Z,1528888425.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:45.442Z,1528888425.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:45.459Z,1528888425.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:45.839Z,1528888425.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:45.864Z,1528888425.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:46.233Z,1528888426.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:46.251Z,1528888426.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:46.631Z,1528888426.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:46.662Z,1528888426.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:47.032Z,1528888427.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:47.064Z,1528888427.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:47.427Z,1528888427.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:47.451Z,1528888427.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:47.843Z,1528888427.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:47.861Z,1528888427.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:48.245Z,1528888428.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:48.263Z,1528888428.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:48.639Z,1528888428.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:48.657Z,1528888428.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:49.031Z,1528888429.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:49.055Z,1528888429.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:49.434Z,1528888429.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:49.465Z,1528888429.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:49.827Z,1528888429.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:49.851Z,1528888429.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:50.238Z,1528888430.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:50.256Z,1528888430.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:50.631Z,1528888430.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:50.656Z,1528888430.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:51.043Z,1528888431.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:51.061Z,1528888431.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:51.442Z,1528888431.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:51.460Z,1528888431.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:51.844Z,1528888431.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:51.863Z,1528888431.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:52.230Z,1528888432.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:52.264Z,1528888432.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:52.627Z,1528888432.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:52.661Z,1528888432.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:53.028Z,1528888433.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:53.056Z,1528888433.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:53.427Z,1528888433.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:53.459Z,1528888433.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:53.853Z,1528888433.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:53.871Z,1528888433.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:54.253Z,1528888434.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:54.271Z,1528888434.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:54.642Z,1528888434.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:54.666Z,1528888434.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:55.031Z,1528888435.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:55.066Z,1528888435.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:55.431Z,1528888435.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:55.468Z,1528888435.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:55.827Z,1528888435.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:55.866Z,1528888435.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:56.231Z,1528888436.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:56.264Z,1528888436.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:56.632Z,1528888436.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:56.664Z,1528888436.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:57.051Z,1528888437.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:57.070Z,1528888437.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:13:57.448Z,1528888437.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:13:57.466Z,1528888437.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:00.562Z,1528888440.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:00.580Z,1528888440.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:00.712Z,1528888440.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:00.755Z,1528888440.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:01.110Z,1528888441.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:01.132Z,1528888441.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:01.514Z,1528888441.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:01.532Z,1528888441.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:01.911Z,1528888441.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:01.936Z,1528888441.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:02.310Z,1528888442.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:02.328Z,1528888442.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:02.722Z,1528888442.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:02.740Z,1528888442.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:03.118Z,1528888443.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:03.135Z,1528888443.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:03.518Z,1528888443.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:03.536Z,1528888443.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:03.912Z,1528888443.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:03.942Z,1528888443.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:04.313Z,1528888444.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:04.331Z,1528888444.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:04.723Z,1528888444.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:04.741Z,1528888444.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:05.123Z,1528888445.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:05.141Z,1528888445.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:05.519Z,1528888445.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:05.537Z,1528888445.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:05.906Z,1528888445.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:05.940Z,1528888445.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:06.311Z,1528888446.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:06.344Z,1528888446.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:06.718Z,1528888446.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:06.749Z,1528888446.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:07.126Z,1528888447.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:07.144Z,1528888447.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:07.524Z,1528888447.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:07.542Z,1528888447.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:07.914Z,1528888447.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:07.936Z,1528888447.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:08.303Z,1528888448.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:08.339Z,1528888448.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:08.727Z,1528888448.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:08.767Z,1528888448.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:09.123Z,1528888449.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:09.141Z,1528888449.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:09.524Z,1528888449.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:09.548Z,1528888449.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:09.914Z,1528888449.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:09.936Z,1528888449.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:10.313Z,1528888450.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:10.336Z,1528888450.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:10.718Z,1528888450.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:10.748Z,1528888450.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:11.127Z,1528888451.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:11.145Z,1528888451.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:11.524Z,1528888451.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:11.542Z,1528888451.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:11.908Z,1528888451.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:11.939Z,1528888451.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:12.303Z,1528888452.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:12.340Z,1528888452.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:12.719Z,1528888452.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:12.737Z,1528888452.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:13.127Z,1528888453.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:13.145Z,1528888453.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:13.528Z,1528888453.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:13.546Z,1528888453.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:13.908Z,1528888453.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:13.939Z,1528888453.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:14.307Z,1528888454.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:14.343Z,1528888454.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:14.728Z,1528888454.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:14.746Z,1528888454.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:15.127Z,1528888455.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:15.146Z,1528888455.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:15.523Z,1528888455.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:15.554Z,1528888455.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:15.908Z,1528888455.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:15.938Z,1528888455.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:16.303Z,1528888456.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:16.340Z,1528888456.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:16.725Z,1528888456.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:16.743Z,1528888456.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:17.129Z,1528888457.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:17.147Z,1528888457.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:17.525Z,1528888457.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:17.543Z,1528888457.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:17.907Z,1528888457.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:17.948Z,1528888457.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:18.308Z,1528888458.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:18.351Z,1528888458.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:18.704Z,1528888458.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:18.734Z,1528888458.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:19.130Z,1528888459.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:19.148Z,1528888459.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:19.517Z,1528888459.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:19.552Z,1528888459.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:19.914Z,1528888459.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:19.957Z,1528888459.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:20.308Z,1528888460.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:20.347Z,1528888460.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:20.703Z,1528888460.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:20.722Z,1528888460.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:21.104Z,1528888461.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:21.122Z,1528888461.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:21.507Z,1528888461.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:21.525Z,1528888461.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:21.926Z,1528888461.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:21.956Z,1528888461.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:22.327Z,1528888462.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:22.355Z,1528888462.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:22.722Z,1528888462.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:22.756Z,1528888462.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:23.111Z,1528888463.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:23.128Z,1528888463.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:23.510Z,1528888463.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:23.528Z,1528888463.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:23.910Z,1528888463.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:23.928Z,1528888463.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:24.310Z,1528888464.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:24.328Z,1528888464.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:24.706Z,1528888464.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:24.724Z,1528888464.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:25.122Z,1528888465.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:25.156Z,1528888465.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:25.521Z,1528888465.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:25.539Z,1528888465.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:25.913Z,1528888465.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:25.936Z,1528888465.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:26.312Z,1528888466.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:26.330Z,1528888466.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:26.713Z,1528888466.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:26.731Z,1528888466.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:27.107Z,1528888467.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:27.132Z,1528888467.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:27.511Z,1528888467.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:27.533Z,1528888467.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:27.921Z,1528888467.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:27.939Z,1528888467.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:28.318Z,1528888468.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:28.340Z,1528888468.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:28.718Z,1528888468.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:28.740Z,1528888468.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:29.113Z,1528888469.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:29.132Z,1528888469.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:29.507Z,1528888469.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:29.530Z,1528888469.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:29.914Z,1528888469.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:29.932Z,1528888469.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:30.310Z,1528888470.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:30.328Z,1528888470.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:30.706Z,1528888470.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:30.736Z,1528888470.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:31.118Z,1528888471.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:31.140Z,1528888471.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:31.521Z,1528888471.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:31.539Z,1528888471.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:31.918Z,1528888471.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:31.940Z,1528888471.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:32.311Z,1528888472.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:32.333Z,1528888472.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:32.714Z,1528888472.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:32.732Z,1528888472.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:33.107Z,1528888473.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:33.139Z,1528888473.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:33.513Z,1528888473.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:33.536Z,1528888473.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:33.919Z,1528888473.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:33.944Z,1528888473.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:34.318Z,1528888474.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:34.340Z,1528888474.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:34.722Z,1528888474.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:34.740Z,1528888474.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:35.113Z,1528888475.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:35.131Z,1528888475.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:35.513Z,1528888475.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:35.536Z,1528888475.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:35.911Z,1528888475.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:35.934Z,1528888475.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:36.310Z,1528888476.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:36.328Z,1528888476.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:36.706Z,1528888476.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:36.733Z,1528888476.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:37.123Z,1528888477.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:37.140Z,1528888477.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:37.524Z,1528888477.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:37.542Z,1528888477.542 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:37.542Z,1528888477.542 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 156
2018-06-13T11:14:37.542Z,1528888477.542 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:14:37.544Z,1528888477.544 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:37.544Z,1528888477.544 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 156
2018-06-13T11:14:37.544Z,1528888477.544 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:14:37.546Z,1528888477.546 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:37.546Z,1528888477.546 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 156
2018-06-13T11:14:37.546Z,1528888477.546 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:14:37.617Z,1528888477.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:14:37.617Z,1528888477.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:14:37.617Z,1528888477.617 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:14:37.926Z,1528888477.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:38.021Z,1528888478.021 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:14:38.021Z,1528888478.021 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 156
2018-06-13T11:14:38.022Z,1528888478.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:14:38.022Z,1528888478.022 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 156
2018-06-13T11:14:38.022Z,1528888478.022 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:14:38.022Z,1528888478.022 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 156
2018-06-13T11:14:38.307Z,1528888478.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:38.333Z,1528888478.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:14:38.333Z,1528888478.333 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:14:38.334Z,1528888478.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:14:38.334Z,1528888478.334 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:14:38.334Z,1528888478.334 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:14:38.335Z,1528888478.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:14:38.335Z,1528888478.335 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:14:38.336Z,1528888478.336 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:14:38.336Z,1528888478.336 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:14:38.707Z,1528888478.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:38.744Z,1528888478.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:14:38.745Z,1528888478.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:39.108Z,1528888479.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:39.139Z,1528888479.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:14:39.140Z,1528888479.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:39.511Z,1528888479.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:39.538Z,1528888479.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:14:39.539Z,1528888479.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:39.928Z,1528888479.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:39.945Z,1528888479.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:14:39.946Z,1528888479.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:40.326Z,1528888480.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:40.344Z,1528888480.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:14:40.345Z,1528888480.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:40.713Z,1528888480.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:40.747Z,1528888480.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:14:40.748Z,1528888480.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:41.107Z,1528888481.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:41.140Z,1528888481.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:14:41.141Z,1528888481.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:41.508Z,1528888481.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:41.543Z,1528888481.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:14:41.544Z,1528888481.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:41.907Z,1528888481.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:41.943Z,1528888481.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:14:41.944Z,1528888481.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:42.307Z,1528888482.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:42.339Z,1528888482.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:14:42.340Z,1528888482.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:42.707Z,1528888482.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:42.744Z,1528888482.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:14:42.745Z,1528888482.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:43.124Z,1528888483.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:43.141Z,1528888483.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:14:43.142Z,1528888483.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:43.518Z,1528888483.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:43.552Z,1528888483.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:14:43.553Z,1528888483.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:43.917Z,1528888483.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:43.944Z,1528888483.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:14:43.946Z,1528888483.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:44.307Z,1528888484.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:44.340Z,1528888484.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:14:44.345Z,1528888484.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:44.707Z,1528888484.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:44.724Z,1528888484.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:14:44.752Z,1528888484.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:45.108Z,1528888485.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:45.147Z,1528888485.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:14:45.147Z,1528888485.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:45.507Z,1528888485.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:45.524Z,1528888485.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:14:45.541Z,1528888485.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:45.921Z,1528888485.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:45.950Z,1528888485.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:14:45.951Z,1528888485.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:46.325Z,1528888486.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:46.360Z,1528888486.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:14:46.361Z,1528888486.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:46.717Z,1528888486.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:46.751Z,1528888486.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:14:46.752Z,1528888486.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:47.107Z,1528888487.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:47.124Z,1528888487.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:14:47.125Z,1528888487.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:47.511Z,1528888487.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:47.528Z,1528888487.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:14:47.530Z,1528888487.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:47.910Z,1528888487.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:47.927Z,1528888487.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:14:47.928Z,1528888487.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:48.311Z,1528888488.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:48.329Z,1528888488.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:14:48.330Z,1528888488.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:48.710Z,1528888488.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:48.728Z,1528888488.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:14:48.728Z,1528888488.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:49.121Z,1528888489.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:49.155Z,1528888489.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:14:49.156Z,1528888489.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:49.521Z,1528888489.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:49.539Z,1528888489.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:14:49.540Z,1528888489.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:49.921Z,1528888489.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:49.939Z,1528888489.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:14:49.940Z,1528888489.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:50.312Z,1528888490.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:50.330Z,1528888490.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:14:50.331Z,1528888490.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:50.710Z,1528888490.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:50.727Z,1528888490.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:14:50.728Z,1528888490.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:51.115Z,1528888491.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:51.132Z,1528888491.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:14:51.133Z,1528888491.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:51.511Z,1528888491.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:51.533Z,1528888491.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:14:51.534Z,1528888491.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:51.921Z,1528888491.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:51.939Z,1528888491.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:14:51.940Z,1528888491.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:52.321Z,1528888492.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:52.339Z,1528888492.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:14:52.340Z,1528888492.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:52.718Z,1528888492.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:52.740Z,1528888492.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:14:52.741Z,1528888492.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:53.115Z,1528888493.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:53.133Z,1528888493.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:14:53.134Z,1528888493.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:53.513Z,1528888493.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:53.536Z,1528888493.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:14:53.537Z,1528888493.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:53.917Z,1528888493.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:53.935Z,1528888493.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:14:53.935Z,1528888493.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:54.319Z,1528888494.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:54.337Z,1528888494.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:14:54.338Z,1528888494.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:57.423Z,1528888497.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:57.441Z,1528888497.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T11:14:57.442Z,1528888497.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:57.585Z,1528888497.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:57.614Z,1528888497.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:57.984Z,1528888497.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:58.019Z,1528888498.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:58.385Z,1528888498.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:58.418Z,1528888498.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:58.770Z,1528888498.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:58.788Z,1528888498.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:59.166Z,1528888499.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:59.204Z,1528888499.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:59.570Z,1528888499.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:59.588Z,1528888499.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:14:59.981Z,1528888499.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:14:59.999Z,1528888499.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:00.381Z,1528888500.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:00.399Z,1528888500.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:00.778Z,1528888500.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:00.796Z,1528888500.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:01.175Z,1528888501.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:01.193Z,1528888501.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:01.572Z,1528888501.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:01.612Z,1528888501.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:01.972Z,1528888501.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:01.995Z,1528888501.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:02.375Z,1528888502.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:02.393Z,1528888502.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:02.775Z,1528888502.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:02.793Z,1528888502.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:03.176Z,1528888503.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:03.217Z,1528888503.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:03.582Z,1528888503.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:03.600Z,1528888503.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:03.981Z,1528888503.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:03.999Z,1528888503.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:04.367Z,1528888504.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:04.400Z,1528888504.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:04.766Z,1528888504.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:04.801Z,1528888504.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:05.175Z,1528888505.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:05.193Z,1528888505.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:05.573Z,1528888505.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:05.591Z,1528888505.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:05.983Z,1528888505.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:06.005Z,1528888506.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:06.383Z,1528888506.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:06.408Z,1528888506.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:06.780Z,1528888506.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:06.798Z,1528888506.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:07.171Z,1528888507.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:07.194Z,1528888507.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:07.574Z,1528888507.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:07.592Z,1528888507.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:07.969Z,1528888507.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:07.987Z,1528888507.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:08.371Z,1528888508.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:08.398Z,1528888508.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:08.767Z,1528888508.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:08.808Z,1528888508.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:09.173Z,1528888509.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:09.209Z,1528888509.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:09.586Z,1528888509.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:09.604Z,1528888509.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:09.988Z,1528888509.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:10.006Z,1528888510.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:10.367Z,1528888510.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:10.400Z,1528888510.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:10.767Z,1528888510.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:10.804Z,1528888510.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:11.168Z,1528888511.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:11.208Z,1528888511.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:11.563Z,1528888511.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:11.597Z,1528888511.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:11.977Z,1528888511.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:12.012Z,1528888512.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:12.389Z,1528888512.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:12.407Z,1528888512.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:12.773Z,1528888512.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:12.802Z,1528888512.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:13.167Z,1528888513.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:13.205Z,1528888513.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:13.568Z,1528888513.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:13.602Z,1528888513.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:13.963Z,1528888513.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:13.981Z,1528888513.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:14.368Z,1528888514.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:14.386Z,1528888514.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:14.766Z,1528888514.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:14.784Z,1528888514.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:15.181Z,1528888515.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:15.216Z,1528888515.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:15.585Z,1528888515.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:15.613Z,1528888515.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:15.985Z,1528888515.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:16.014Z,1528888516.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:16.367Z,1528888516.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:16.388Z,1528888516.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:16.771Z,1528888516.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:16.788Z,1528888516.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:17.170Z,1528888517.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:17.189Z,1528888517.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:17.570Z,1528888517.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:17.588Z,1528888517.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:17.981Z,1528888517.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:18.015Z,1528888518.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:18.385Z,1528888518.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:18.419Z,1528888518.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:18.778Z,1528888518.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:18.795Z,1528888518.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:19.172Z,1528888519.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:19.196Z,1528888519.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:19.572Z,1528888519.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:19.590Z,1528888519.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:19.968Z,1528888519.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:19.987Z,1528888519.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:20.373Z,1528888520.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:20.396Z,1528888520.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:20.773Z,1528888520.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:20.791Z,1528888520.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:21.178Z,1528888521.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:21.196Z,1528888521.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:21.581Z,1528888521.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:21.599Z,1528888521.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:21.981Z,1528888521.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:21.999Z,1528888521.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:22.367Z,1528888522.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:22.390Z,1528888522.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:22.772Z,1528888522.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:22.789Z,1528888522.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:23.172Z,1528888523.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:23.202Z,1528888523.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:23.573Z,1528888523.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:23.591Z,1528888523.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:23.982Z,1528888523.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:23.000Z,1528888524.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:24.381Z,1528888524.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:24.405Z,1528888524.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:24.782Z,1528888524.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:24.807Z,1528888524.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:25.171Z,1528888525.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:25.194Z,1528888525.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:25.574Z,1528888525.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:25.592Z,1528888525.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:25.973Z,1528888525.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:25.991Z,1528888525.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:26.371Z,1528888526.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:26.395Z,1528888526.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:26.771Z,1528888526.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:26.796Z,1528888526.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:27.183Z,1528888527.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:27.201Z,1528888527.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:27.582Z,1528888527.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:27.600Z,1528888527.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:27.983Z,1528888527.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:28.001Z,1528888528.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:28.373Z,1528888528.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:28.391Z,1528888528.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:28.771Z,1528888528.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:28.794Z,1528888528.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:29.175Z,1528888529.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:29.192Z,1528888529.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:29.573Z,1528888529.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:29.591Z,1528888529.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:29.982Z,1528888529.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:30.000Z,1528888530.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:30.383Z,1528888530.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:30.408Z,1528888530.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:30.782Z,1528888530.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:30.803Z,1528888530.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:31.171Z,1528888531.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:31.194Z,1528888531.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:31.571Z,1528888531.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:31.596Z,1528888531.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:31.974Z,1528888531.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:31.992Z,1528888531.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:32.371Z,1528888532.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:32.395Z,1528888532.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:32.771Z,1528888532.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:32.796Z,1528888532.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:33.182Z,1528888533.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:33.200Z,1528888533.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:33.582Z,1528888533.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:33.604Z,1528888533.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:33.983Z,1528888533.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:34.001Z,1528888534.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:34.373Z,1528888534.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:34.391Z,1528888534.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:34.777Z,1528888534.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:34.795Z,1528888534.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:35.171Z,1528888535.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:35.208Z,1528888535.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:35.572Z,1528888535.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:35.591Z,1528888535.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:35.983Z,1528888535.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:36.001Z,1528888536.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:36.388Z,1528888536.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:36.407Z,1528888536.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:36.784Z,1528888536.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:36.802Z,1528888536.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:37.172Z,1528888537.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:37.191Z,1528888537.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:37.574Z,1528888537.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:37.597Z,1528888537.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:37.963Z,1528888537.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:37.999Z,1528888537.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:38.371Z,1528888538.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:38.395Z,1528888538.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:38.771Z,1528888538.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:38.806Z,1528888538.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:39.180Z,1528888539.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:39.198Z,1528888539.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:39.587Z,1528888539.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:39.604Z,1528888539.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:39.988Z,1528888539.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:40.006Z,1528888540.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:40.374Z,1528888540.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:40.396Z,1528888540.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:40.771Z,1528888540.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:40.795Z,1528888540.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:41.176Z,1528888541.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:41.194Z,1528888541.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:41.563Z,1528888541.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:41.604Z,1528888541.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:41.984Z,1528888541.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:42.003Z,1528888542.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:42.389Z,1528888542.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:42.412Z,1528888542.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:42.789Z,1528888542.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:42.807Z,1528888542.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:43.168Z,1528888543.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:43.208Z,1528888543.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:43.568Z,1528888543.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:43.600Z,1528888543.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:43.964Z,1528888543.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:44.006Z,1528888544.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:44.368Z,1528888544.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:44.403Z,1528888544.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:44.767Z,1528888544.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:44.806Z,1528888544.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:45.186Z,1528888545.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:45.204Z,1528888545.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:45.586Z,1528888545.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:45.617Z,1528888545.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:45.986Z,1528888545.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:46.012Z,1528888546.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:46.367Z,1528888546.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:46.408Z,1528888546.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:46.767Z,1528888546.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:46.784Z,1528888546.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:47.168Z,1528888547.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:47.186Z,1528888547.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:47.567Z,1528888547.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:47.585Z,1528888547.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:47.981Z,1528888547.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:48.015Z,1528888548.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:48.381Z,1528888548.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:48.417Z,1528888548.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:48.781Z,1528888548.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:48.815Z,1528888548.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:49.170Z,1528888549.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:49.188Z,1528888549.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:49.570Z,1528888549.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:49.588Z,1528888549.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:49.970Z,1528888549.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:49.988Z,1528888549.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:50.370Z,1528888550.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:50.396Z,1528888550.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:50.770Z,1528888550.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:50.788Z,1528888550.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:51.173Z,1528888551.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:51.191Z,1528888551.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:51.581Z,1528888551.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:51.599Z,1528888551.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:51.981Z,1528888551.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:51.000Z,1528888552.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:52.372Z,1528888552.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:52.390Z,1528888552.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:52.772Z,1528888552.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:52.790Z,1528888552.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:53.174Z,1528888553.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:53.192Z,1528888553.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:53.572Z,1528888553.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:53.596Z,1528888553.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:53.985Z,1528888553.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:54.003Z,1528888554.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:54.385Z,1528888554.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:54.403Z,1528888554.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:57.505Z,1528888557.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:57.532Z,1528888557.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:57.647Z,1528888557.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:57.684Z,1528888557.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:58.047Z,1528888558.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:58.082Z,1528888558.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:58.449Z,1528888558.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:58.477Z,1528888558.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:58.843Z,1528888558.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:58.877Z,1528888558.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:59.257Z,1528888559.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:59.286Z,1528888559.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:15:59.657Z,1528888559.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:15:59.692Z,1528888559.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:00.053Z,1528888560.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:00.080Z,1528888560.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:00.443Z,1528888560.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:00.474Z,1528888560.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:00.843Z,1528888560.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:00.861Z,1528888560.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:01.244Z,1528888561.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:01.284Z,1528888561.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:01.647Z,1528888561.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:01.665Z,1528888561.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:02.053Z,1528888562.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:02.072Z,1528888562.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:02.457Z,1528888562.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:02.491Z,1528888562.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:02.857Z,1528888562.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:02.875Z,1528888562.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:03.249Z,1528888563.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:03.267Z,1528888563.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:03.647Z,1528888563.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:03.672Z,1528888563.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:04.049Z,1528888564.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:04.068Z,1528888564.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:04.450Z,1528888564.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:04.468Z,1528888564.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:04.848Z,1528888564.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:04.872Z,1528888564.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:05.258Z,1528888565.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:05.277Z,1528888565.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:05.653Z,1528888565.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:05.671Z,1528888565.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:06.054Z,1528888566.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:06.072Z,1528888566.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:06.449Z,1528888566.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:06.467Z,1528888566.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:06.847Z,1528888566.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:06.865Z,1528888566.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:07.248Z,1528888567.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:07.266Z,1528888567.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:07.649Z,1528888567.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:07.667Z,1528888567.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:08.051Z,1528888568.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:08.069Z,1528888568.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:08.457Z,1528888568.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:08.475Z,1528888568.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:08.858Z,1528888568.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:08.876Z,1528888568.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:09.268Z,1528888569.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:09.319Z,1528888569.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:09.647Z,1528888569.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:09.665Z,1528888569.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:10.049Z,1528888570.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:10.069Z,1528888570.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:10.446Z,1528888570.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:10.463Z,1528888570.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:10.848Z,1528888570.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:10.866Z,1528888570.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:11.258Z,1528888571.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:11.276Z,1528888571.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:11.657Z,1528888571.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:11.676Z,1528888571.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:12.054Z,1528888572.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:12.072Z,1528888572.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:12.450Z,1528888572.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:12.468Z,1528888572.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:12.843Z,1528888572.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:12.875Z,1528888572.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:13.251Z,1528888573.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:13.276Z,1528888573.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:13.649Z,1528888573.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:13.672Z,1528888573.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:14.050Z,1528888574.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:14.068Z,1528888574.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:14.457Z,1528888574.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:14.475Z,1528888574.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:14.858Z,1528888574.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:14.876Z,1528888574.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:15.247Z,1528888575.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:15.265Z,1528888575.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:15.648Z,1528888575.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:15.666Z,1528888575.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:16.049Z,1528888576.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:16.068Z,1528888576.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:16.449Z,1528888576.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:16.467Z,1528888576.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:16.848Z,1528888576.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:16.869Z,1528888576.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:17.257Z,1528888577.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:17.276Z,1528888577.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:17.657Z,1528888577.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:17.675Z,1528888577.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:18.054Z,1528888578.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:18.072Z,1528888578.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:18.449Z,1528888578.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:18.472Z,1528888578.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:18.848Z,1528888578.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:18.866Z,1528888578.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:19.248Z,1528888579.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:19.266Z,1528888579.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:19.650Z,1528888579.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:19.669Z,1528888579.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:20.050Z,1528888580.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:20.072Z,1528888580.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:20.457Z,1528888580.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:20.475Z,1528888580.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:20.857Z,1528888580.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:20.876Z,1528888580.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:21.243Z,1528888581.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:21.266Z,1528888581.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:21.647Z,1528888581.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:21.670Z,1528888581.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:22.050Z,1528888582.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:22.068Z,1528888582.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:22.450Z,1528888582.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:22.468Z,1528888582.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:22.847Z,1528888582.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:22.878Z,1528888582.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:23.262Z,1528888583.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:23.280Z,1528888583.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:23.658Z,1528888583.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:23.676Z,1528888583.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:24.054Z,1528888584.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:24.080Z,1528888584.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:24.451Z,1528888584.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:24.469Z,1528888584.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:24.843Z,1528888584.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:24.866Z,1528888584.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:25.247Z,1528888585.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:25.279Z,1528888585.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:25.653Z,1528888585.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:25.676Z,1528888585.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:26.057Z,1528888586.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:26.076Z,1528888586.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:26.458Z,1528888586.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:26.476Z,1528888586.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:26.857Z,1528888586.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:26.876Z,1528888586.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:27.244Z,1528888587.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:27.283Z,1528888587.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:27.647Z,1528888587.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:27.672Z,1528888587.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:28.050Z,1528888588.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:28.082Z,1528888588.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:28.443Z,1528888588.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:28.469Z,1528888588.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:28.847Z,1528888588.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:28.872Z,1528888588.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:29.262Z,1528888589.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:29.280Z,1528888589.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:29.659Z,1528888589.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:29.678Z,1528888589.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:30.059Z,1528888590.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:30.084Z,1528888590.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:30.450Z,1528888590.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:30.469Z,1528888590.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:30.843Z,1528888590.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:30.867Z,1528888590.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:31.248Z,1528888591.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:31.274Z,1528888591.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:31.639Z,1528888591.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:31.682Z,1528888591.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:32.058Z,1528888592.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:32.090Z,1528888592.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:32.465Z,1528888592.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:32.483Z,1528888592.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:32.861Z,1528888592.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:32.879Z,1528888592.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:33.243Z,1528888593.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:33.280Z,1528888593.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:33.643Z,1528888593.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:33.680Z,1528888593.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:34.039Z,1528888594.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:34.069Z,1528888594.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:34.444Z,1528888594.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:34.471Z,1528888594.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:34.843Z,1528888594.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:34.880Z,1528888594.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:35.260Z,1528888595.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:35.279Z,1528888595.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:35.658Z,1528888595.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:35.689Z,1528888595.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:36.054Z,1528888596.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:36.077Z,1528888596.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:36.443Z,1528888596.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:36.471Z,1528888596.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:36.839Z,1528888596.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:36.875Z,1528888596.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:37.244Z,1528888597.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:37.271Z,1528888597.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:37.643Z,1528888597.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:37.671Z,1528888597.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:38.054Z,1528888598.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:38.078Z,1528888598.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:38.463Z,1528888598.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:38.481Z,1528888598.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:38.860Z,1528888598.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:38.877Z,1528888598.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:39.239Z,1528888599.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:39.275Z,1528888599.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:39.643Z,1528888599.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:39.670Z,1528888599.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:40.043Z,1528888600.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:40.072Z,1528888600.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:40.444Z,1528888600.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:40.471Z,1528888600.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:40.844Z,1528888600.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:40.876Z,1528888600.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:41.260Z,1528888601.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:41.278Z,1528888601.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:41.658Z,1528888601.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:41.689Z,1528888601.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:42.063Z,1528888602.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:42.081Z,1528888602.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:42.439Z,1528888602.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:42.472Z,1528888602.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:42.839Z,1528888602.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:42.872Z,1528888602.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:43.248Z,1528888603.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:43.275Z,1528888603.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:43.639Z,1528888603.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:43.676Z,1528888603.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:44.058Z,1528888604.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:44.081Z,1528888604.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:44.463Z,1528888604.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:44.481Z,1528888604.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:44.860Z,1528888604.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:44.884Z,1528888604.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:45.239Z,1528888605.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:45.279Z,1528888605.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:45.644Z,1528888605.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:45.676Z,1528888605.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:46.039Z,1528888606.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:46.077Z,1528888606.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:46.444Z,1528888606.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:46.478Z,1528888606.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:46.843Z,1528888606.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:46.884Z,1528888606.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:47.261Z,1528888607.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:47.290Z,1528888607.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:47.661Z,1528888607.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:47.689Z,1528888607.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:48.057Z,1528888608.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:48.091Z,1528888608.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:48.447Z,1528888608.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:48.465Z,1528888608.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:48.847Z,1528888608.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:48.865Z,1528888608.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:49.247Z,1528888609.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:49.265Z,1528888609.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:49.646Z,1528888609.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:49.664Z,1528888609.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:50.053Z,1528888610.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:50.071Z,1528888610.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:50.457Z,1528888610.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:50.491Z,1528888610.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:50.857Z,1528888610.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:50.875Z,1528888610.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:51.246Z,1528888611.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:51.264Z,1528888611.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:51.646Z,1528888611.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:51.664Z,1528888611.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:52.046Z,1528888612.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:52.063Z,1528888612.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:52.448Z,1528888612.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:52.466Z,1528888612.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:52.846Z,1528888612.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:52.864Z,1528888612.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:53.256Z,1528888613.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:53.274Z,1528888613.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:53.658Z,1528888613.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:53.676Z,1528888613.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:53.695Z,1528888613.695 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T11:16:53.695Z,1528888613.695 [Default:CheckIn:C.Wait] Stopped
2018-06-13T11:16:53.695Z,1528888613.695 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T11:16:53.695Z,1528888613.695 [Default:CheckIn:D] Running Loop=1
2018-06-13T11:16:54.061Z,1528888614.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:54.100Z,1528888614.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:54.103Z,1528888614.103 [Default:CheckIn:D] Stopped
2018-06-13T11:16:54.103Z,1528888614.103 [Default:CheckIn:E] Running Loop=1
2018-06-13T11:16:54.452Z,1528888614.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:54.471Z,1528888614.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:54.474Z,1528888614.474 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 469.677637 min 
2018-06-13T11:16:54.474Z,1528888614.474 [Default:CheckIn:E] Stopped
2018-06-13T11:16:54.475Z,1528888614.475 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T11:16:54.475Z,1528888614.475 [Default:CheckIn] Stopped
2018-06-13T11:16:54.475Z,1528888614.475 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T11:16:54.475Z,1528888614.475 [Default:CheckIn](INFO): Running loop #46
2018-06-13T11:16:54.475Z,1528888614.475 [Default:CheckIn] Running Loop=46
2018-06-13T11:16:54.475Z,1528888614.475 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T11:16:54.475Z,1528888614.475 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T11:16:57.561Z,1528888617.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:57.579Z,1528888617.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:57.687Z,1528888617.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:57.737Z,1528888617.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:58.108Z,1528888618.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:58.126Z,1528888618.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:58.509Z,1528888618.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:58.527Z,1528888618.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:58.899Z,1528888618.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:58.917Z,1528888618.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:59.283Z,1528888619.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:59.317Z,1528888619.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:16:59.683Z,1528888619.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:16:59.720Z,1528888619.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:00.083Z,1528888620.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:00.115Z,1528888620.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:00.484Z,1528888620.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:00.515Z,1528888620.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:00.883Z,1528888620.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:00.915Z,1528888620.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:01.303Z,1528888621.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:01.325Z,1528888621.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:01.703Z,1528888621.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:01.720Z,1528888621.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:02.103Z,1528888622.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:02.121Z,1528888622.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:02.479Z,1528888622.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:02.508Z,1528888622.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:02.883Z,1528888622.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:02.922Z,1528888622.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:03.284Z,1528888623.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:03.323Z,1528888623.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:03.679Z,1528888623.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:03.696Z,1528888623.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:04.097Z,1528888624.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:04.126Z,1528888624.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:04.497Z,1528888624.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:04.532Z,1528888624.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:04.894Z,1528888624.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:04.921Z,1528888624.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:05.283Z,1528888625.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:05.327Z,1528888625.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:05.683Z,1528888625.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:05.717Z,1528888625.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:06.083Z,1528888626.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:06.100Z,1528888626.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:06.484Z,1528888626.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:06.501Z,1528888626.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:06.882Z,1528888626.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:06.900Z,1528888626.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:07.293Z,1528888627.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:07.324Z,1528888627.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:07.701Z,1528888627.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:07.736Z,1528888627.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:08.097Z,1528888628.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:08.133Z,1528888628.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:08.484Z,1528888628.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:08.518Z,1528888628.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:08.888Z,1528888628.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:08.912Z,1528888628.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:09.287Z,1528888629.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:09.305Z,1528888629.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:09.685Z,1528888629.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:09.708Z,1528888629.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:10.103Z,1528888630.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:10.135Z,1528888630.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:10.498Z,1528888630.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:10.532Z,1528888630.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:10.897Z,1528888630.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:10.936Z,1528888630.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:11.290Z,1528888631.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:11.312Z,1528888631.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:11.689Z,1528888631.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:11.707Z,1528888631.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:12.088Z,1528888632.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:12.107Z,1528888632.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:12.492Z,1528888632.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:12.516Z,1528888632.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:12.887Z,1528888632.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:12.905Z,1528888632.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:13.297Z,1528888633.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:13.315Z,1528888633.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:13.697Z,1528888633.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:13.715Z,1528888633.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:14.091Z,1528888634.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:14.108Z,1528888634.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:14.487Z,1528888634.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:14.512Z,1528888634.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:14.891Z,1528888634.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:14.909Z,1528888634.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:15.289Z,1528888635.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:15.308Z,1528888635.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:15.688Z,1528888635.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:15.707Z,1528888635.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:16.067Z,1528888636.067 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T11:17:16.067Z,1528888636.067 [NAL9602] Data Fault, FailCount= 3
2018-06-13T11:17:16.067Z,1528888636.067 [NAL9602](ERROR): Data Fault
2018-06-13T11:17:16.088Z,1528888636.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:16.131Z,1528888636.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:16.213Z,1528888636.213 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T11:17:16.462Z,1528888636.462 [NAL9602](INFO): Powering down
2018-06-13T11:17:16.490Z,1528888636.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:16.509Z,1528888636.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:16.887Z,1528888636.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:16.910Z,1528888636.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:17.288Z,1528888637.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:17.305Z,1528888637.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:17.379Z,1528888637.379 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T11:17:17.379Z,1528888637.379 [NAL9602] No Fault, FailCount= 3
2018-06-13T11:17:17.685Z,1528888637.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:17.703Z,1528888637.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:18.087Z,1528888638.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:18.109Z,1528888638.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:18.488Z,1528888638.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:18.505Z,1528888638.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:18.884Z,1528888638.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:18.902Z,1528888638.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:19.278Z,1528888639.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:19.315Z,1528888639.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:19.679Z,1528888639.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:19.707Z,1528888639.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:20.078Z,1528888640.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:20.106Z,1528888640.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:20.486Z,1528888640.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:20.510Z,1528888640.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:20.888Z,1528888640.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:20.906Z,1528888640.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:21.278Z,1528888641.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:21.306Z,1528888641.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:21.688Z,1528888641.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:21.707Z,1528888641.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:22.078Z,1528888642.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:22.114Z,1528888642.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:22.488Z,1528888642.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:22.507Z,1528888642.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:22.878Z,1528888642.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:22.915Z,1528888642.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:23.288Z,1528888643.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:23.306Z,1528888643.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:23.678Z,1528888643.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:23.715Z,1528888643.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:24.086Z,1528888644.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:24.110Z,1528888644.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:24.479Z,1528888644.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:24.514Z,1528888644.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:24.878Z,1528888644.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:24.914Z,1528888644.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:25.286Z,1528888645.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:25.308Z,1528888645.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:25.688Z,1528888645.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:25.706Z,1528888645.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:26.078Z,1528888646.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:26.114Z,1528888646.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:26.486Z,1528888646.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:26.511Z,1528888646.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:26.878Z,1528888646.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:26.906Z,1528888646.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:27.278Z,1528888647.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:27.317Z,1528888647.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:27.682Z,1528888647.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:27.716Z,1528888647.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:28.078Z,1528888648.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:28.106Z,1528888648.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:28.482Z,1528888648.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:28.510Z,1528888648.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:28.882Z,1528888648.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:28.916Z,1528888648.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:29.283Z,1528888649.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:29.311Z,1528888649.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:29.678Z,1528888649.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:29.717Z,1528888649.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:30.081Z,1528888650.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:30.116Z,1528888650.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:30.482Z,1528888650.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:30.510Z,1528888650.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:30.878Z,1528888650.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:30.908Z,1528888650.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:31.282Z,1528888651.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:31.315Z,1528888651.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:31.682Z,1528888651.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:31.722Z,1528888651.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:32.078Z,1528888652.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:32.104Z,1528888652.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:32.482Z,1528888652.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:32.512Z,1528888652.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:32.882Z,1528888652.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:32.900Z,1528888652.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:33.278Z,1528888653.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:33.296Z,1528888653.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:33.682Z,1528888653.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:33.720Z,1528888653.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:34.082Z,1528888654.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:34.100Z,1528888654.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:34.482Z,1528888654.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:34.500Z,1528888654.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:34.883Z,1528888654.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:34.920Z,1528888654.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:35.285Z,1528888655.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:35.303Z,1528888655.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:35.685Z,1528888655.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:35.703Z,1528888655.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:36.085Z,1528888656.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:36.103Z,1528888656.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:36.485Z,1528888656.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:36.502Z,1528888656.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:36.884Z,1528888656.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:36.902Z,1528888656.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:37.286Z,1528888657.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:37.303Z,1528888657.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:37.685Z,1528888657.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:37.702Z,1528888657.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:38.084Z,1528888658.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:38.103Z,1528888658.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:38.486Z,1528888658.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:38.503Z,1528888658.503 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:38.504Z,1528888658.504 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 157
2018-06-13T11:17:38.504Z,1528888658.504 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:17:38.506Z,1528888658.506 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:38.506Z,1528888658.506 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 157
2018-06-13T11:17:38.506Z,1528888658.506 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:17:38.507Z,1528888658.507 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:38.508Z,1528888658.508 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 157
2018-06-13T11:17:38.508Z,1528888658.508 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:17:38.585Z,1528888658.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:17:38.585Z,1528888658.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:17:38.586Z,1528888658.586 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:17:38.888Z,1528888658.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:38.985Z,1528888658.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:17:38.985Z,1528888658.985 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 157
2018-06-13T11:17:38.986Z,1528888658.986 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:17:38.986Z,1528888658.986 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 157
2018-06-13T11:17:38.986Z,1528888658.986 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:17:38.986Z,1528888658.986 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 157
2018-06-13T11:17:39.284Z,1528888659.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:39.301Z,1528888659.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:17:39.302Z,1528888659.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:17:39.302Z,1528888659.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:17:39.302Z,1528888659.302 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:17:39.303Z,1528888659.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:17:39.303Z,1528888659.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:17:39.304Z,1528888659.304 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:17:39.304Z,1528888659.304 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:17:39.304Z,1528888659.304 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:17:39.682Z,1528888659.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:39.718Z,1528888659.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:17:39.719Z,1528888659.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:40.088Z,1528888660.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:40.106Z,1528888660.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:17:40.107Z,1528888660.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:40.488Z,1528888660.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:40.506Z,1528888660.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:17:40.507Z,1528888660.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:40.890Z,1528888660.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:40.907Z,1528888660.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:17:40.908Z,1528888660.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:41.288Z,1528888661.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:41.305Z,1528888661.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:17:41.306Z,1528888661.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:41.688Z,1528888661.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:41.706Z,1528888661.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:17:41.707Z,1528888661.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:42.087Z,1528888662.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:42.105Z,1528888662.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:17:42.106Z,1528888662.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:42.488Z,1528888662.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:42.511Z,1528888662.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:17:42.512Z,1528888662.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:42.878Z,1528888662.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:42.912Z,1528888662.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:17:42.918Z,1528888662.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:43.283Z,1528888663.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:43.310Z,1528888663.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:17:43.311Z,1528888663.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:43.682Z,1528888663.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:43.710Z,1528888663.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:17:43.711Z,1528888663.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:44.078Z,1528888664.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:44.108Z,1528888664.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:17:44.113Z,1528888664.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:44.482Z,1528888664.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:44.519Z,1528888664.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:17:44.520Z,1528888664.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:44.886Z,1528888664.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:44.915Z,1528888664.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:17:44.916Z,1528888664.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:45.279Z,1528888665.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:45.308Z,1528888665.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:17:45.313Z,1528888665.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:45.687Z,1528888665.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:45.725Z,1528888665.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:17:45.726Z,1528888665.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:46.079Z,1528888666.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:46.096Z,1528888666.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:17:46.097Z,1528888666.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:46.466Z,1528888666.466 [NAL9602](INFO): Powering up NAL9602
2018-06-13T11:17:46.484Z,1528888666.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:46.524Z,1528888666.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:17:46.525Z,1528888666.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:46.887Z,1528888666.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:46.904Z,1528888666.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:17:46.905Z,1528888666.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:47.286Z,1528888667.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:47.303Z,1528888667.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:17:47.304Z,1528888667.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:47.683Z,1528888667.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:47.701Z,1528888667.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:17:47.702Z,1528888667.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:48.086Z,1528888668.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:48.104Z,1528888668.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:17:48.105Z,1528888668.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:48.486Z,1528888668.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:48.503Z,1528888668.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:17:48.504Z,1528888668.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:48.884Z,1528888668.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:48.903Z,1528888668.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:17:48.904Z,1528888668.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:49.286Z,1528888669.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:49.303Z,1528888669.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:17:49.304Z,1528888669.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:49.685Z,1528888669.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:49.703Z,1528888669.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:17:49.704Z,1528888669.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:50.085Z,1528888670.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:50.103Z,1528888670.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:17:50.104Z,1528888670.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:50.488Z,1528888670.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:50.506Z,1528888670.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:17:50.507Z,1528888670.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:50.885Z,1528888670.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:50.902Z,1528888670.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:17:50.903Z,1528888670.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:51.286Z,1528888671.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:51.304Z,1528888671.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:17:51.305Z,1528888671.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:51.689Z,1528888671.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:51.706Z,1528888671.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:17:51.707Z,1528888671.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:52.089Z,1528888672.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:52.106Z,1528888672.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:17:52.107Z,1528888672.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:52.491Z,1528888672.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:52.509Z,1528888672.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:17:52.510Z,1528888672.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:52.888Z,1528888672.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:52.906Z,1528888672.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:17:52.907Z,1528888672.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:53.289Z,1528888673.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:53.306Z,1528888673.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:17:53.307Z,1528888673.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:53.688Z,1528888673.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:53.707Z,1528888673.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:17:53.708Z,1528888673.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:54.090Z,1528888674.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:54.108Z,1528888674.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:17:54.109Z,1528888674.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:54.490Z,1528888674.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:54.507Z,1528888674.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:17:54.508Z,1528888674.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:57.606Z,1528888677.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:57.637Z,1528888677.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T11:17:57.638Z,1528888677.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:57.778Z,1528888677.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:57.830Z,1528888677.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T11:17:57.831Z,1528888677.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:58.143Z,1528888678.143 [NAL9602](INFO): NAL9602 initialized
2018-06-13T11:17:58.159Z,1528888678.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:58.202Z,1528888678.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T11:17:58.203Z,1528888678.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:58.556Z,1528888678.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:58.590Z,1528888678.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:58.965Z,1528888678.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:59.001Z,1528888679.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:59.369Z,1528888679.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:59.398Z,1528888679.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:17:59.769Z,1528888679.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:17:59.800Z,1528888679.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:00.156Z,1528888680.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:00.174Z,1528888680.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:00.561Z,1528888680.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:00.579Z,1528888680.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:00.954Z,1528888680.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:00.973Z,1528888680.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:01.370Z,1528888681.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:01.388Z,1528888681.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:01.770Z,1528888681.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:01.788Z,1528888681.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:02.166Z,1528888682.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:02.186Z,1528888682.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:02.562Z,1528888682.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:02.584Z,1528888682.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:02.959Z,1528888682.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:02.994Z,1528888682.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:03.352Z,1528888683.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:03.392Z,1528888683.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:03.755Z,1528888683.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:03.785Z,1528888683.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:04.171Z,1528888684.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:04.190Z,1528888684.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:04.565Z,1528888684.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:04.594Z,1528888684.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:04.971Z,1528888684.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:04.989Z,1528888684.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:05.359Z,1528888685.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:05.388Z,1528888685.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:05.755Z,1528888685.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:05.788Z,1528888685.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:06.172Z,1528888686.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:06.196Z,1528888686.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:06.575Z,1528888686.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:06.593Z,1528888686.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:06.972Z,1528888686.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:06.991Z,1528888686.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:07.357Z,1528888687.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:07.392Z,1528888687.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:07.755Z,1528888687.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:07.792Z,1528888687.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:08.173Z,1528888688.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:08.191Z,1528888688.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:08.575Z,1528888688.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:08.601Z,1528888688.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:08.971Z,1528888688.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:08.990Z,1528888688.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:09.351Z,1528888689.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:09.388Z,1528888689.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:09.755Z,1528888689.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:09.785Z,1528888689.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:10.169Z,1528888690.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:10.207Z,1528888690.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:10.565Z,1528888690.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:10.602Z,1528888690.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:10.965Z,1528888690.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:10.992Z,1528888690.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:11.355Z,1528888691.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:11.389Z,1528888691.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:11.751Z,1528888691.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:11.769Z,1528888691.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:12.166Z,1528888692.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:12.200Z,1528888692.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:12.569Z,1528888692.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:12.598Z,1528888692.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:12.964Z,1528888692.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:13.002Z,1528888693.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:13.356Z,1528888693.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:13.396Z,1528888693.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:13.759Z,1528888693.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:13.777Z,1528888693.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:14.165Z,1528888694.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:14.184Z,1528888694.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:14.569Z,1528888694.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:14.587Z,1528888694.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:14.966Z,1528888694.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:14.984Z,1528888694.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:15.358Z,1528888695.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:15.376Z,1528888695.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:15.760Z,1528888695.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:15.784Z,1528888695.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:16.165Z,1528888696.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:16.184Z,1528888696.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:16.565Z,1528888696.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:16.583Z,1528888696.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:16.966Z,1528888696.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:16.984Z,1528888696.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:17.354Z,1528888697.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:17.388Z,1528888697.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:17.758Z,1528888697.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:17.776Z,1528888697.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:18.166Z,1528888698.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:18.184Z,1528888698.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:18.569Z,1528888698.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:18.588Z,1528888698.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:18.967Z,1528888698.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:18.985Z,1528888698.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:19.355Z,1528888699.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:19.389Z,1528888699.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:19.759Z,1528888699.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:19.783Z,1528888699.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:20.170Z,1528888700.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:20.189Z,1528888700.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:20.570Z,1528888700.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:20.592Z,1528888700.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:20.970Z,1528888700.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:20.989Z,1528888700.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:21.358Z,1528888701.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:21.376Z,1528888701.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:21.762Z,1528888701.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:21.780Z,1528888701.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:22.170Z,1528888702.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:22.188Z,1528888702.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:22.570Z,1528888702.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:22.588Z,1528888702.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:22.970Z,1528888702.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:22.987Z,1528888702.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:23.359Z,1528888703.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:23.383Z,1528888703.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:23.758Z,1528888703.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:23.777Z,1528888703.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:24.170Z,1528888704.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:24.192Z,1528888704.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:24.570Z,1528888704.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:24.588Z,1528888704.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:24.971Z,1528888704.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:24.988Z,1528888704.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:25.362Z,1528888705.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:25.380Z,1528888705.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:25.759Z,1528888705.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:25.783Z,1528888705.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:26.170Z,1528888706.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:26.189Z,1528888706.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:26.570Z,1528888706.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:26.592Z,1528888706.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:26.970Z,1528888706.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:26.988Z,1528888706.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:27.358Z,1528888707.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:27.376Z,1528888707.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:27.759Z,1528888707.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:27.785Z,1528888707.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:28.171Z,1528888708.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:28.189Z,1528888708.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:28.573Z,1528888708.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:28.591Z,1528888708.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:28.974Z,1528888708.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:28.992Z,1528888708.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:29.351Z,1528888709.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:29.385Z,1528888709.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:29.751Z,1528888709.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:29.786Z,1528888709.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:30.172Z,1528888710.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:30.190Z,1528888710.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:30.576Z,1528888710.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:30.595Z,1528888710.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:30.972Z,1528888710.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:30.990Z,1528888710.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:31.357Z,1528888711.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:31.394Z,1528888711.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:31.755Z,1528888711.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:31.790Z,1528888711.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:32.173Z,1528888712.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:32.191Z,1528888712.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:32.574Z,1528888712.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:32.591Z,1528888712.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:32.966Z,1528888712.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:33.004Z,1528888713.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:33.357Z,1528888713.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:33.391Z,1528888713.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:33.755Z,1528888713.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:33.790Z,1528888713.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:34.165Z,1528888714.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:34.205Z,1528888714.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:34.569Z,1528888714.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:34.590Z,1528888714.590 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T11:18:34.590Z,1528888714.590 [BPC1] Communications Fault, FailCount= 4
2018-06-13T11:18:34.590Z,1528888714.590 [BPC1](ERROR): Communications Fault
2018-06-13T11:18:34.600Z,1528888714.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:34.673Z,1528888714.673 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T11:18:34.982Z,1528888714.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:35.001Z,1528888715.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:35.355Z,1528888715.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:35.393Z,1528888715.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:35.759Z,1528888715.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:35.777Z,1528888715.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:35.881Z,1528888715.881 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T11:18:35.881Z,1528888715.881 [BPC1] No Fault, FailCount= 4
2018-06-13T11:18:36.173Z,1528888716.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:36.259Z,1528888716.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:36.573Z,1528888716.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:36.611Z,1528888716.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:36.965Z,1528888716.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:36.983Z,1528888716.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:37.360Z,1528888717.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:37.377Z,1528888717.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:37.761Z,1528888717.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:37.780Z,1528888717.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:38.166Z,1528888718.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:38.184Z,1528888718.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:38.570Z,1528888718.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:38.588Z,1528888718.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:38.966Z,1528888718.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:38.984Z,1528888718.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:39.358Z,1528888719.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:39.376Z,1528888719.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:39.760Z,1528888719.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:39.779Z,1528888719.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:40.160Z,1528888720.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:40.179Z,1528888720.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:40.565Z,1528888720.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:40.584Z,1528888720.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:40.969Z,1528888720.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:40.988Z,1528888720.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:41.366Z,1528888721.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:41.383Z,1528888721.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:41.758Z,1528888721.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:41.776Z,1528888721.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:42.159Z,1528888722.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:42.182Z,1528888722.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:42.561Z,1528888722.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:42.579Z,1528888722.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:42.962Z,1528888722.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:42.980Z,1528888722.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:43.366Z,1528888723.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:43.388Z,1528888723.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:43.769Z,1528888723.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:43.786Z,1528888723.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:44.167Z,1528888724.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:44.184Z,1528888724.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:44.554Z,1528888724.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:44.588Z,1528888724.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:44.958Z,1528888724.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:44.975Z,1528888724.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:45.358Z,1528888725.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:45.375Z,1528888725.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:45.762Z,1528888725.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:45.779Z,1528888725.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:46.161Z,1528888726.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:46.178Z,1528888726.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:46.566Z,1528888726.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:46.585Z,1528888726.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:46.970Z,1528888726.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:46.988Z,1528888726.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:47.366Z,1528888727.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:47.383Z,1528888727.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:47.758Z,1528888727.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:47.776Z,1528888727.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:48.159Z,1528888728.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:48.184Z,1528888728.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:48.561Z,1528888728.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:48.579Z,1528888728.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:48.958Z,1528888728.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:48.976Z,1528888728.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:49.366Z,1528888729.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:49.388Z,1528888729.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:49.769Z,1528888729.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:49.786Z,1528888729.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:50.167Z,1528888730.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:50.184Z,1528888730.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:50.560Z,1528888730.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:50.578Z,1528888730.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:50.960Z,1528888730.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:50.978Z,1528888730.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:51.358Z,1528888731.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:51.376Z,1528888731.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:51.763Z,1528888731.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:51.781Z,1528888731.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:52.160Z,1528888732.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:52.178Z,1528888732.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:52.567Z,1528888732.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:52.585Z,1528888732.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:52.969Z,1528888732.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:52.987Z,1528888732.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:53.366Z,1528888733.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:53.383Z,1528888733.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:53.762Z,1528888733.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:53.780Z,1528888733.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:54.164Z,1528888734.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:54.188Z,1528888734.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:54.562Z,1528888734.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:54.584Z,1528888734.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:54.964Z,1528888734.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:54.982Z,1528888734.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:55.370Z,1528888735.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:55.387Z,1528888735.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:55.773Z,1528888735.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:55.791Z,1528888735.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:58.877Z,1528888738.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:58.895Z,1528888738.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:59.035Z,1528888739.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:59.073Z,1528888739.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:59.432Z,1528888739.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:59.450Z,1528888739.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:18:59.836Z,1528888739.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:18:59.870Z,1528888739.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:00.241Z,1528888740.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:00.277Z,1528888740.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:00.641Z,1528888740.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:00.680Z,1528888740.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:01.041Z,1528888741.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:01.067Z,1528888741.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:01.431Z,1528888741.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:01.448Z,1528888741.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:01.830Z,1528888741.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:01.848Z,1528888741.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:02.245Z,1528888742.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:02.279Z,1528888742.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:02.641Z,1528888742.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:02.664Z,1528888742.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:03.037Z,1528888743.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:03.060Z,1528888743.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:03.434Z,1528888743.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:03.452Z,1528888743.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:03.832Z,1528888743.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:03.851Z,1528888743.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:04.245Z,1528888744.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:04.263Z,1528888744.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:04.641Z,1528888744.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:04.664Z,1528888744.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:05.038Z,1528888745.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:05.055Z,1528888745.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:05.432Z,1528888745.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:05.450Z,1528888745.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:05.833Z,1528888745.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:05.851Z,1528888745.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:06.245Z,1528888746.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:06.285Z,1528888746.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:06.642Z,1528888746.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:06.659Z,1528888746.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:07.042Z,1528888747.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:07.064Z,1528888747.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:07.432Z,1528888747.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:07.454Z,1528888747.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:07.832Z,1528888747.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:07.849Z,1528888747.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:08.246Z,1528888748.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:08.263Z,1528888748.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:08.642Z,1528888748.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:08.664Z,1528888748.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:09.038Z,1528888749.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:09.056Z,1528888749.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:09.435Z,1528888749.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:09.454Z,1528888749.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:09.831Z,1528888749.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:09.862Z,1528888749.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:10.242Z,1528888750.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:10.259Z,1528888750.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:10.642Z,1528888750.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:10.681Z,1528888750.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:11.042Z,1528888751.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:11.064Z,1528888751.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:11.435Z,1528888751.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:11.453Z,1528888751.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:11.834Z,1528888751.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:11.852Z,1528888751.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:12.241Z,1528888752.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:12.260Z,1528888752.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:12.641Z,1528888752.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:12.664Z,1528888752.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:13.042Z,1528888753.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:13.064Z,1528888753.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:13.434Z,1528888753.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:13.452Z,1528888753.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:13.831Z,1528888753.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:13.861Z,1528888753.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:14.246Z,1528888754.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:14.264Z,1528888754.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:14.642Z,1528888754.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:14.668Z,1528888754.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:15.043Z,1528888755.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:15.068Z,1528888755.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:15.436Z,1528888755.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:15.455Z,1528888755.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:15.831Z,1528888755.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:15.854Z,1528888755.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:16.243Z,1528888756.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:16.268Z,1528888756.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:16.646Z,1528888756.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:16.663Z,1528888756.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:17.042Z,1528888757.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:17.068Z,1528888757.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:17.435Z,1528888757.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:17.460Z,1528888757.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:17.835Z,1528888757.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:17.860Z,1528888757.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:18.245Z,1528888758.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:18.263Z,1528888758.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:18.644Z,1528888758.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:18.668Z,1528888758.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:19.044Z,1528888759.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:19.062Z,1528888759.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:19.431Z,1528888759.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:19.456Z,1528888759.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:19.834Z,1528888759.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:19.864Z,1528888759.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:20.238Z,1528888760.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:20.264Z,1528888760.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:20.644Z,1528888760.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:20.668Z,1528888760.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:21.049Z,1528888761.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:21.067Z,1528888761.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:21.448Z,1528888761.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:21.472Z,1528888761.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:21.831Z,1528888761.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:21.865Z,1528888761.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:22.232Z,1528888762.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:22.262Z,1528888762.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:22.624Z,1528888762.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:22.658Z,1528888762.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:23.028Z,1528888763.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:23.062Z,1528888763.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:23.438Z,1528888763.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:23.468Z,1528888763.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:23.842Z,1528888763.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:23.871Z,1528888763.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:24.242Z,1528888764.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:24.270Z,1528888764.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:24.627Z,1528888764.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:24.662Z,1528888764.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:25.023Z,1528888765.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:25.042Z,1528888765.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:25.430Z,1528888765.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:25.465Z,1528888765.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:25.828Z,1528888765.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:25.868Z,1528888765.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:26.234Z,1528888766.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:26.252Z,1528888766.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:26.641Z,1528888766.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:26.660Z,1528888766.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:27.041Z,1528888767.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:27.060Z,1528888767.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:27.439Z,1528888767.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:27.457Z,1528888767.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:27.833Z,1528888767.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:27.851Z,1528888767.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:28.236Z,1528888768.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:28.254Z,1528888768.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:28.630Z,1528888768.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:28.648Z,1528888768.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:29.031Z,1528888769.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:29.060Z,1528888769.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:29.441Z,1528888769.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:29.460Z,1528888769.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:29.839Z,1528888769.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:29.857Z,1528888769.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:30.242Z,1528888770.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:30.260Z,1528888770.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:30.626Z,1528888770.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:30.656Z,1528888770.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:31.030Z,1528888771.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:31.048Z,1528888771.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:31.431Z,1528888771.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:31.454Z,1528888771.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:31.831Z,1528888771.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:31.857Z,1528888771.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:32.234Z,1528888772.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:32.252Z,1528888772.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:32.643Z,1528888772.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:32.660Z,1528888772.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:33.042Z,1528888773.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:33.060Z,1528888773.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:33.443Z,1528888773.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:33.461Z,1528888773.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:33.831Z,1528888773.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:33.854Z,1528888773.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:34.237Z,1528888774.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:34.260Z,1528888774.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:34.636Z,1528888774.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:34.654Z,1528888774.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:35.031Z,1528888775.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:35.062Z,1528888775.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:35.442Z,1528888775.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:35.460Z,1528888775.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:35.843Z,1528888775.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:35.861Z,1528888775.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:36.242Z,1528888776.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:36.261Z,1528888776.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:36.631Z,1528888776.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:36.688Z,1528888776.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:37.034Z,1528888777.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:37.052Z,1528888777.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:37.434Z,1528888777.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:37.451Z,1528888777.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:37.834Z,1528888777.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:37.852Z,1528888777.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:38.234Z,1528888778.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:38.252Z,1528888778.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:38.642Z,1528888778.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:38.664Z,1528888778.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:39.043Z,1528888779.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:39.061Z,1528888779.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:39.443Z,1528888779.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:39.462Z,1528888779.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:39.831Z,1528888779.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:39.854Z,1528888779.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:40.237Z,1528888780.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:40.255Z,1528888780.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:40.631Z,1528888780.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:40.648Z,1528888780.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:41.031Z,1528888781.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:41.061Z,1528888781.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:41.445Z,1528888781.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:41.506Z,1528888781.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:41.844Z,1528888781.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:41.862Z,1528888781.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:42.247Z,1528888782.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:42.266Z,1528888782.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:42.627Z,1528888782.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:42.664Z,1528888782.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:43.023Z,1528888783.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:43.066Z,1528888783.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:43.427Z,1528888783.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:43.464Z,1528888783.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:43.838Z,1528888783.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:43.861Z,1528888783.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:44.227Z,1528888784.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:44.268Z,1528888784.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:44.644Z,1528888784.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:44.662Z,1528888784.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:45.048Z,1528888785.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:45.066Z,1528888785.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:45.448Z,1528888785.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:45.467Z,1528888785.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:45.827Z,1528888785.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:45.861Z,1528888785.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:46.234Z,1528888786.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:46.263Z,1528888786.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:46.628Z,1528888786.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:46.662Z,1528888786.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:47.027Z,1528888787.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:47.068Z,1528888787.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:47.437Z,1528888787.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:47.467Z,1528888787.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:47.841Z,1528888787.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:47.876Z,1528888787.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:48.253Z,1528888788.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:48.276Z,1528888788.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:48.627Z,1528888788.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:48.664Z,1528888788.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:49.027Z,1528888789.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:49.087Z,1528888789.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:49.431Z,1528888789.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:49.480Z,1528888789.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:49.831Z,1528888789.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:49.850Z,1528888789.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:50.230Z,1528888790.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:50.249Z,1528888790.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:50.641Z,1528888790.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:50.676Z,1528888790.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:51.045Z,1528888791.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:51.083Z,1528888791.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:51.441Z,1528888791.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:51.464Z,1528888791.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:51.831Z,1528888791.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:51.861Z,1528888791.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:52.238Z,1528888792.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:52.256Z,1528888792.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:52.631Z,1528888792.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:52.649Z,1528888792.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:53.031Z,1528888793.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:53.057Z,1528888793.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:53.447Z,1528888793.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:53.465Z,1528888793.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:53.844Z,1528888793.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:53.862Z,1528888793.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:54.248Z,1528888794.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:54.273Z,1528888794.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:54.627Z,1528888794.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:54.664Z,1528888794.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:57.750Z,1528888797.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:57.774Z,1528888797.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:57.906Z,1528888797.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:57.924Z,1528888797.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:58.353Z,1528888798.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:58.372Z,1528888798.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:58.717Z,1528888798.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:58.751Z,1528888798.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:59.118Z,1528888799.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:59.149Z,1528888799.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:59.503Z,1528888799.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:59.520Z,1528888799.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:19:59.901Z,1528888799.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:19:59.919Z,1528888799.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:00.313Z,1528888800.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:00.347Z,1528888800.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:00.713Z,1528888800.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:00.731Z,1528888800.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:01.113Z,1528888801.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:01.131Z,1528888801.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:01.507Z,1528888801.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:01.531Z,1528888801.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:01.903Z,1528888801.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:01.960Z,1528888801.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:02.315Z,1528888802.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:02.364Z,1528888802.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:02.715Z,1528888802.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:02.733Z,1528888802.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:03.115Z,1528888803.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:03.134Z,1528888803.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:03.507Z,1528888803.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:03.525Z,1528888803.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:03.909Z,1528888803.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:03.928Z,1528888803.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:04.315Z,1528888804.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:04.333Z,1528888804.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:04.717Z,1528888804.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:04.735Z,1528888804.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:05.114Z,1528888805.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:05.144Z,1528888805.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:05.500Z,1528888805.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:05.529Z,1528888805.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:05.900Z,1528888805.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:05.930Z,1528888805.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:06.315Z,1528888806.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:06.338Z,1528888806.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:06.720Z,1528888806.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:06.738Z,1528888806.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:07.119Z,1528888807.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:07.152Z,1528888807.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:07.504Z,1528888807.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:07.532Z,1528888807.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:07.903Z,1528888807.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:07.932Z,1528888807.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:08.321Z,1528888808.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:08.340Z,1528888808.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:08.720Z,1528888808.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:08.738Z,1528888808.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:09.116Z,1528888809.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:09.134Z,1528888809.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:09.500Z,1528888809.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:09.536Z,1528888809.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:09.900Z,1528888809.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:09.933Z,1528888809.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:10.316Z,1528888810.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:10.335Z,1528888810.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:10.718Z,1528888810.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:10.744Z,1528888810.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:11.120Z,1528888811.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:11.138Z,1528888811.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:11.499Z,1528888811.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:11.540Z,1528888811.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:11.900Z,1528888811.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:11.930Z,1528888811.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:12.301Z,1528888812.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:12.320Z,1528888812.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:12.714Z,1528888812.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:12.752Z,1528888812.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:13.113Z,1528888813.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:13.147Z,1528888813.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:13.513Z,1528888813.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:13.558Z,1528888813.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:13.904Z,1528888813.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:13.956Z,1528888813.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:14.305Z,1528888814.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:14.330Z,1528888814.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:14.703Z,1528888814.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:14.744Z,1528888814.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:15.102Z,1528888815.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:15.127Z,1528888815.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:15.519Z,1528888815.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:15.537Z,1528888815.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:15.917Z,1528888815.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:15.935Z,1528888815.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:16.315Z,1528888816.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:16.333Z,1528888816.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:16.705Z,1528888816.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:16.724Z,1528888816.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:17.095Z,1528888817.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:17.133Z,1528888817.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:17.500Z,1528888817.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:17.528Z,1528888817.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:17.895Z,1528888817.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:17.937Z,1528888817.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:18.299Z,1528888818.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:18.328Z,1528888818.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:18.715Z,1528888818.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:18.733Z,1528888818.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:19.116Z,1528888819.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:19.134Z,1528888819.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:19.516Z,1528888819.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:19.534Z,1528888819.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:19.899Z,1528888819.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:19.927Z,1528888819.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:20.299Z,1528888820.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:20.335Z,1528888820.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:20.700Z,1528888820.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:20.727Z,1528888820.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:21.099Z,1528888821.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:21.127Z,1528888821.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:21.520Z,1528888821.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:21.539Z,1528888821.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:21.919Z,1528888821.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:21.937Z,1528888821.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:22.320Z,1528888822.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:22.338Z,1528888822.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:22.699Z,1528888822.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:22.738Z,1528888822.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:23.099Z,1528888823.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:23.135Z,1528888823.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:23.499Z,1528888823.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:23.536Z,1528888823.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:23.900Z,1528888823.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:23.932Z,1528888823.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:24.300Z,1528888824.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:24.339Z,1528888824.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:24.715Z,1528888824.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:24.734Z,1528888824.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:25.120Z,1528888825.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:25.144Z,1528888825.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:25.513Z,1528888825.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:25.556Z,1528888825.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:25.899Z,1528888825.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:25.932Z,1528888825.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:26.299Z,1528888826.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:26.340Z,1528888826.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:26.700Z,1528888826.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:26.735Z,1528888826.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:27.103Z,1528888827.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:27.128Z,1528888827.128 [BPC1](ERROR): Failed to parse message.
2018-06-13T11:20:27.128Z,1528888827.128 [BPC1](ERROR): Failed to parse Bank B battery data
2018-06-13T11:20:27.137Z,1528888827.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:27.513Z,1528888827.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:27.560Z,1528888827.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:27.913Z,1528888827.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:27.945Z,1528888827.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:28.309Z,1528888828.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:28.338Z,1528888828.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:28.699Z,1528888828.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:28.733Z,1528888828.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:29.100Z,1528888829.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:29.140Z,1528888829.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:29.503Z,1528888829.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:29.521Z,1528888829.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:29.903Z,1528888829.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:29.921Z,1528888829.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:30.302Z,1528888830.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:30.319Z,1528888830.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:30.713Z,1528888830.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:30.747Z,1528888830.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:31.114Z,1528888831.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:31.132Z,1528888831.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:31.513Z,1528888831.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:31.531Z,1528888831.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:31.904Z,1528888831.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:31.923Z,1528888831.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:32.304Z,1528888832.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:32.323Z,1528888832.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:32.704Z,1528888832.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:32.722Z,1528888832.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:33.103Z,1528888833.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:33.121Z,1528888833.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:33.513Z,1528888833.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:33.536Z,1528888833.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:33.913Z,1528888833.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:33.931Z,1528888833.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:34.310Z,1528888834.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:34.328Z,1528888834.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:34.705Z,1528888834.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:34.723Z,1528888834.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:35.106Z,1528888835.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:35.124Z,1528888835.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:35.504Z,1528888835.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:35.528Z,1528888835.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:35.906Z,1528888835.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:35.925Z,1528888835.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:36.304Z,1528888836.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:36.328Z,1528888836.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:36.710Z,1528888836.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:36.760Z,1528888836.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:37.113Z,1528888837.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:37.131Z,1528888837.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:37.510Z,1528888837.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:37.532Z,1528888837.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:37.903Z,1528888837.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:37.938Z,1528888837.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:38.306Z,1528888838.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:38.324Z,1528888838.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:38.710Z,1528888838.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:38.728Z,1528888838.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:39.105Z,1528888839.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:39.131Z,1528888839.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:39.515Z,1528888839.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:39.533Z,1528888839.533 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:39.533Z,1528888839.533 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 158
2018-06-13T11:20:39.533Z,1528888839.533 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:20:39.535Z,1528888839.535 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:39.535Z,1528888839.535 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 158
2018-06-13T11:20:39.535Z,1528888839.535 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:20:39.537Z,1528888839.537 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:39.537Z,1528888839.537 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 158
2018-06-13T11:20:39.537Z,1528888839.537 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:20:39.625Z,1528888839.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:20:39.625Z,1528888839.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:20:39.626Z,1528888839.626 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:20:39.918Z,1528888839.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:40.013Z,1528888840.013 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:20:40.013Z,1528888840.013 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 158
2018-06-13T11:20:40.014Z,1528888840.014 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:20:40.014Z,1528888840.014 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 158
2018-06-13T11:20:40.014Z,1528888840.014 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:20:40.014Z,1528888840.014 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 158
2018-06-13T11:20:40.317Z,1528888840.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:40.367Z,1528888840.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:20:40.367Z,1528888840.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:20:40.368Z,1528888840.368 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:20:40.368Z,1528888840.368 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:20:40.368Z,1528888840.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:20:40.393Z,1528888840.393 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:20:40.393Z,1528888840.393 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:20:40.394Z,1528888840.394 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:20:40.394Z,1528888840.394 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:20:40.703Z,1528888840.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:40.721Z,1528888840.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:20:40.722Z,1528888840.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:41.102Z,1528888841.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:41.120Z,1528888841.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:20:41.121Z,1528888841.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:41.507Z,1528888841.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:41.524Z,1528888841.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:20:41.526Z,1528888841.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:41.903Z,1528888841.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:41.921Z,1528888841.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:20:41.922Z,1528888841.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:42.302Z,1528888842.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:42.332Z,1528888842.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:20:42.332Z,1528888842.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:42.710Z,1528888842.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:42.728Z,1528888842.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:20:42.729Z,1528888842.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:43.113Z,1528888843.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:43.131Z,1528888843.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:20:43.132Z,1528888843.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:43.510Z,1528888843.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:43.528Z,1528888843.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:20:43.529Z,1528888843.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:43.904Z,1528888843.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:43.923Z,1528888843.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:20:43.924Z,1528888843.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:44.306Z,1528888844.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:44.324Z,1528888844.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:20:44.325Z,1528888844.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:44.708Z,1528888844.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:44.727Z,1528888844.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:20:44.727Z,1528888844.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:45.104Z,1528888845.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:45.123Z,1528888845.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:20:45.124Z,1528888845.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:45.513Z,1528888845.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:45.532Z,1528888845.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:20:45.532Z,1528888845.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:45.913Z,1528888845.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:45.931Z,1528888845.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:20:45.932Z,1528888845.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:46.314Z,1528888846.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:46.332Z,1528888846.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:20:46.333Z,1528888846.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:46.706Z,1528888846.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:46.724Z,1528888846.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:20:46.725Z,1528888846.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:47.103Z,1528888847.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:47.135Z,1528888847.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:20:47.136Z,1528888847.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:47.504Z,1528888847.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:47.566Z,1528888847.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:20:47.567Z,1528888847.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:47.911Z,1528888847.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:47.965Z,1528888847.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:20:47.966Z,1528888847.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:48.311Z,1528888848.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:48.328Z,1528888848.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:20:48.329Z,1528888848.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:48.716Z,1528888848.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:48.734Z,1528888848.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:20:48.735Z,1528888848.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:49.119Z,1528888849.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:49.136Z,1528888849.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:20:49.138Z,1528888849.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:49.520Z,1528888849.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:49.537Z,1528888849.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:20:49.538Z,1528888849.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:49.908Z,1528888849.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:49.932Z,1528888849.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:20:49.933Z,1528888849.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:50.307Z,1528888850.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:50.325Z,1528888850.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:20:50.326Z,1528888850.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:50.703Z,1528888850.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:50.737Z,1528888850.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:20:50.738Z,1528888850.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:51.104Z,1528888851.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:51.132Z,1528888851.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:20:51.133Z,1528888851.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:51.524Z,1528888851.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:51.543Z,1528888851.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:20:51.544Z,1528888851.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:51.918Z,1528888851.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:51.940Z,1528888851.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:20:51.942Z,1528888851.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:52.316Z,1528888852.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:52.336Z,1528888852.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:20:52.336Z,1528888852.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:52.702Z,1528888852.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:52.736Z,1528888852.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:20:52.738Z,1528888852.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:53.107Z,1528888853.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:53.153Z,1528888853.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:20:53.154Z,1528888853.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:53.499Z,1528888853.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:53.537Z,1528888853.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:20:53.538Z,1528888853.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:53.899Z,1528888853.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:53.937Z,1528888853.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:20:53.938Z,1528888853.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:54.302Z,1528888854.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:54.341Z,1528888854.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:20:54.342Z,1528888854.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:54.717Z,1528888854.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:54.752Z,1528888854.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:20:54.753Z,1528888854.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:57.834Z,1528888857.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:57.853Z,1528888857.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T11:20:57.854Z,1528888857.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:57.987Z,1528888857.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:58.005Z,1528888858.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T11:20:58.006Z,1528888858.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:58.363Z,1528888858.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:58.380Z,1528888858.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:20:58.381Z,1528888858.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:58.772Z,1528888858.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:58.807Z,1528888858.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T11:20:58.808Z,1528888858.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:59.167Z,1528888859.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:59.192Z,1528888859.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T11:20:59.210Z,1528888859.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:59.577Z,1528888859.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:20:59.629Z,1528888859.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:20:59.974Z,1528888859.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:00.024Z,1528888860.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:00.375Z,1528888860.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:00.393Z,1528888860.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:00.769Z,1528888860.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:00.792Z,1528888860.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:01.170Z,1528888861.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:01.188Z,1528888861.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:01.569Z,1528888861.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:01.587Z,1528888861.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:01.969Z,1528888861.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:01.987Z,1528888861.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:02.365Z,1528888862.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:02.389Z,1528888862.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:02.778Z,1528888862.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:02.796Z,1528888862.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:03.181Z,1528888863.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:03.199Z,1528888863.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:03.577Z,1528888863.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:03.600Z,1528888863.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:03.967Z,1528888863.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:03.998Z,1528888863.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:04.368Z,1528888864.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:04.386Z,1528888864.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:04.766Z,1528888864.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:04.785Z,1528888864.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:05.170Z,1528888865.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:05.188Z,1528888865.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:05.574Z,1528888865.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:05.598Z,1528888865.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:05.979Z,1528888865.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:06.028Z,1528888866.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:06.378Z,1528888866.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:06.404Z,1528888866.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:06.768Z,1528888866.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:06.786Z,1528888866.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:07.170Z,1528888867.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:07.189Z,1528888867.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:07.567Z,1528888867.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:07.596Z,1528888867.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:07.969Z,1528888867.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:07.987Z,1528888867.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:08.370Z,1528888868.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:08.388Z,1528888868.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:08.779Z,1528888868.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:08.797Z,1528888868.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:09.181Z,1528888869.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:09.201Z,1528888869.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:09.583Z,1528888869.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:09.601Z,1528888869.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:09.970Z,1528888869.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:09.988Z,1528888869.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:10.368Z,1528888870.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:10.392Z,1528888870.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:10.770Z,1528888870.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:10.796Z,1528888870.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:11.167Z,1528888871.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:11.204Z,1528888871.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:11.579Z,1528888871.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:11.609Z,1528888871.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:11.985Z,1528888871.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:12.003Z,1528888872.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:12.383Z,1528888872.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:12.401Z,1528888872.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:12.763Z,1528888872.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:12.796Z,1528888872.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:13.163Z,1528888873.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:13.191Z,1528888873.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:13.563Z,1528888873.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:13.591Z,1528888873.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:13.963Z,1528888873.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:13.996Z,1528888873.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:14.363Z,1528888874.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:14.391Z,1528888874.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:14.783Z,1528888874.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:14.801Z,1528888874.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:15.183Z,1528888875.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:15.284Z,1528888875.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:15.584Z,1528888875.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:15.602Z,1528888875.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:15.963Z,1528888875.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:15.999Z,1528888875.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:16.363Z,1528888876.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:16.404Z,1528888876.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:16.764Z,1528888876.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:16.794Z,1528888876.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:17.163Z,1528888877.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:17.190Z,1528888877.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:17.579Z,1528888877.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:17.597Z,1528888877.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:17.984Z,1528888877.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:18.002Z,1528888878.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:18.379Z,1528888878.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:18.404Z,1528888878.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:18.763Z,1528888878.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:18.812Z,1528888878.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:19.163Z,1528888879.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:19.192Z,1528888879.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:19.567Z,1528888879.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:19.595Z,1528888879.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:19.964Z,1528888879.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:19.992Z,1528888879.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:20.363Z,1528888880.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:20.391Z,1528888880.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:20.784Z,1528888880.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:20.802Z,1528888880.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:21.183Z,1528888881.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:21.203Z,1528888881.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:21.586Z,1528888881.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:21.604Z,1528888881.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:21.963Z,1528888881.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:21.999Z,1528888881.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:22.363Z,1528888882.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:22.400Z,1528888882.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:22.764Z,1528888882.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:22.796Z,1528888882.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:23.163Z,1528888883.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:23.201Z,1528888883.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:23.570Z,1528888883.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:23.616Z,1528888883.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:23.984Z,1528888883.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:24.002Z,1528888884.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:24.384Z,1528888884.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:24.402Z,1528888884.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:24.767Z,1528888884.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:24.800Z,1528888884.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:25.163Z,1528888885.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:25.202Z,1528888885.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:25.567Z,1528888885.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:25.606Z,1528888885.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:25.964Z,1528888885.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:25.982Z,1528888885.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:26.369Z,1528888886.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:26.406Z,1528888886.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:26.777Z,1528888886.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:26.812Z,1528888886.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:27.177Z,1528888887.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:27.196Z,1528888887.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:27.578Z,1528888887.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:27.596Z,1528888887.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:27.970Z,1528888887.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:27.988Z,1528888887.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:28.371Z,1528888888.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:28.390Z,1528888888.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:28.771Z,1528888888.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:28.790Z,1528888888.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:29.167Z,1528888889.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:29.202Z,1528888889.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:29.579Z,1528888889.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:29.598Z,1528888889.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:29.983Z,1528888889.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:30.006Z,1528888890.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:30.379Z,1528888890.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:30.399Z,1528888890.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:30.767Z,1528888890.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:30.793Z,1528888890.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:31.176Z,1528888891.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:31.202Z,1528888891.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:31.569Z,1528888891.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:31.609Z,1528888891.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:31.975Z,1528888891.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:31.993Z,1528888891.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:32.371Z,1528888892.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:32.389Z,1528888892.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:32.782Z,1528888892.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:32.800Z,1528888892.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:33.184Z,1528888893.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:33.207Z,1528888893.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:33.584Z,1528888893.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:33.608Z,1528888893.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:33.963Z,1528888893.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:33.000Z,1528888894.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:34.370Z,1528888894.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:34.396Z,1528888894.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:34.767Z,1528888894.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:34.803Z,1528888894.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:35.163Z,1528888895.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:35.204Z,1528888895.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:35.573Z,1528888895.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:35.604Z,1528888895.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:35.973Z,1528888895.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:36.003Z,1528888896.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:36.384Z,1528888896.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:36.408Z,1528888896.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:36.767Z,1528888896.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:36.802Z,1528888896.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:37.159Z,1528888897.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:37.194Z,1528888897.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:37.566Z,1528888897.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:37.592Z,1528888897.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:37.966Z,1528888897.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:38.008Z,1528888898.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:38.367Z,1528888898.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:38.385Z,1528888898.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:38.777Z,1528888898.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:38.812Z,1528888898.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:39.177Z,1528888899.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:39.196Z,1528888899.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:39.577Z,1528888899.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:39.596Z,1528888899.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:39.970Z,1528888899.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:39.989Z,1528888899.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:40.367Z,1528888900.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:40.385Z,1528888900.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:40.771Z,1528888900.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:40.790Z,1528888900.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:41.172Z,1528888901.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:41.191Z,1528888901.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:41.581Z,1528888901.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:41.600Z,1528888901.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:41.977Z,1528888901.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:41.996Z,1528888901.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:42.378Z,1528888902.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:42.397Z,1528888902.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:42.772Z,1528888902.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:42.797Z,1528888902.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:43.172Z,1528888903.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:43.191Z,1528888903.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:43.572Z,1528888903.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:43.597Z,1528888903.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:43.968Z,1528888903.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:44.002Z,1528888904.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:44.371Z,1528888904.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:44.394Z,1528888904.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:44.779Z,1528888904.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:44.797Z,1528888904.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:45.181Z,1528888905.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:45.200Z,1528888905.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:45.583Z,1528888905.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:45.601Z,1528888905.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:45.968Z,1528888905.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:45.995Z,1528888905.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:46.371Z,1528888906.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:46.396Z,1528888906.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:46.770Z,1528888906.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:46.808Z,1528888906.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:47.168Z,1528888907.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:47.195Z,1528888907.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:47.584Z,1528888907.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:47.608Z,1528888907.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:47.982Z,1528888907.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:48.000Z,1528888908.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:48.382Z,1528888908.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:48.400Z,1528888908.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:48.768Z,1528888908.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:48.796Z,1528888908.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:49.169Z,1528888909.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:49.192Z,1528888909.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:49.573Z,1528888909.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:49.591Z,1528888909.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:49.974Z,1528888909.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:49.996Z,1528888909.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:50.359Z,1528888910.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:50.392Z,1528888910.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:50.783Z,1528888910.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:50.824Z,1528888910.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:51.182Z,1528888911.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:51.200Z,1528888911.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:51.584Z,1528888911.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:51.602Z,1528888911.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:51.974Z,1528888911.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:51.995Z,1528888911.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:52.368Z,1528888912.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:52.396Z,1528888912.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:52.769Z,1528888912.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:52.787Z,1528888912.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:53.170Z,1528888913.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:53.193Z,1528888913.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:53.582Z,1528888913.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:53.602Z,1528888913.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:53.986Z,1528888913.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:54.005Z,1528888914.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:54.384Z,1528888914.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:54.402Z,1528888914.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:54.776Z,1528888914.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:54.795Z,1528888914.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:54.798Z,1528888914.798 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T11:16:54.5Z
2018-06-13T11:21:54.798Z,1528888914.798 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T11:21:54.798Z,1528888914.798 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T11:21:57.953Z,1528888917.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:57.998Z,1528888917.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:59.036Z,1528888919.036 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0184.lzma
2018-06-13T11:21:59.056Z,1528888919.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:59.125Z,1528888919.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:59.269Z,1528888919.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:59.295Z,1528888919.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:21:59.630Z,1528888919.630 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0184.lzma.bak
2018-06-13T11:21:59.630Z,1528888919.630 [DataOverHttps](INFO): SBD MOMSN=8329128
2018-06-13T11:21:59.683Z,1528888919.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:21:59.701Z,1528888919.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:01.539Z,1528888921.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:01.564Z,1528888921.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:01.675Z,1528888921.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:01.712Z,1528888921.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:04.823Z,1528888924.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:04.851Z,1528888924.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:04.961Z,1528888924.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:05.009Z,1528888925.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:05.384Z,1528888925.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:05.402Z,1528888925.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:05.785Z,1528888925.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:05.804Z,1528888925.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:06.183Z,1528888926.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:06.203Z,1528888926.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:06.567Z,1528888926.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:06.603Z,1528888926.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:06.968Z,1528888926.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:06.999Z,1528888926.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:07.367Z,1528888927.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:07.400Z,1528888927.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:07.784Z,1528888927.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:07.802Z,1528888927.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:10.913Z,1528888930.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:10.966Z,1528888930.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:11.053Z,1528888931.053 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0185.lzma
2018-06-13T11:22:11.096Z,1528888931.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:11.145Z,1528888931.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:11.485Z,1528888931.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:11.503Z,1528888931.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:11.854Z,1528888931.854 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0185.lzma.bak
2018-06-13T11:22:11.854Z,1528888931.854 [DataOverHttps](INFO): SBD MOMSN=8329130
2018-06-13T11:22:11.899Z,1528888931.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:11.918Z,1528888931.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:13.751Z,1528888933.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:13.770Z,1528888933.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:13.773Z,1528888933.773 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T11:22:13.773Z,1528888933.773 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T11:22:13.773Z,1528888933.773 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T11:22:13.917Z,1528888933.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:13.946Z,1528888933.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:14.313Z,1528888934.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:14.351Z,1528888934.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:14.713Z,1528888934.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:14.747Z,1528888934.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:15.102Z,1528888935.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:15.120Z,1528888935.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:15.502Z,1528888935.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:15.520Z,1528888935.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:15.904Z,1528888935.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:15.923Z,1528888935.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:16.304Z,1528888936.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:16.322Z,1528888936.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:16.713Z,1528888936.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:16.732Z,1528888936.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:17.117Z,1528888937.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:17.135Z,1528888937.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:17.514Z,1528888937.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:17.531Z,1528888937.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:17.910Z,1528888937.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:17.928Z,1528888937.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:21.028Z,1528888941.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:21.062Z,1528888941.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:21.179Z,1528888941.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:21.213Z,1528888941.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:21.603Z,1528888941.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:21.628Z,1528888941.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:22.004Z,1528888942.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:22.022Z,1528888942.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:22.385Z,1528888942.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:22.431Z,1528888942.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:22.771Z,1528888942.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:22.805Z,1528888942.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:23.175Z,1528888943.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:23.230Z,1528888943.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:23.575Z,1528888943.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:23.626Z,1528888943.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:23.976Z,1528888943.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:24.034Z,1528888944.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:24.375Z,1528888944.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:24.426Z,1528888944.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:24.789Z,1528888944.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:24.832Z,1528888944.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:25.189Z,1528888945.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:25.223Z,1528888945.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:25.589Z,1528888945.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:25.621Z,1528888945.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:25.979Z,1528888945.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:25.997Z,1528888945.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:26.379Z,1528888946.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:26.398Z,1528888946.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:26.778Z,1528888946.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:26.800Z,1528888946.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:27.178Z,1528888947.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:27.196Z,1528888947.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:27.589Z,1528888947.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:27.612Z,1528888947.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:27.989Z,1528888947.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:28.033Z,1528888948.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:28.386Z,1528888948.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:28.413Z,1528888948.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:28.782Z,1528888948.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:28.800Z,1528888948.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:29.181Z,1528888949.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:29.199Z,1528888949.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:29.579Z,1528888949.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:29.601Z,1528888949.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:29.983Z,1528888949.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:30.012Z,1528888950.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:30.381Z,1528888950.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:30.399Z,1528888950.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:30.790Z,1528888950.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:30.816Z,1528888950.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:31.196Z,1528888951.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:31.218Z,1528888951.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:31.594Z,1528888951.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:31.617Z,1528888951.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:31.980Z,1528888951.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:31.999Z,1528888951.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:32.371Z,1528888952.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:32.416Z,1528888952.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:32.782Z,1528888952.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:32.800Z,1528888952.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:33.180Z,1528888953.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:33.219Z,1528888953.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:33.596Z,1528888953.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:33.614Z,1528888953.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:33.992Z,1528888953.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:34.016Z,1528888954.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:34.391Z,1528888954.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:34.410Z,1528888954.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:34.776Z,1528888954.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:34.810Z,1528888954.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:35.171Z,1528888955.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:35.199Z,1528888955.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:35.591Z,1528888955.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:35.616Z,1528888955.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:35.999Z,1528888955.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:36.018Z,1528888956.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:36.470Z,1528888956.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:36.592Z,1528888956.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:36.787Z,1528888956.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:36.855Z,1528888956.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:37.175Z,1528888957.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:37.226Z,1528888957.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:37.581Z,1528888957.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:37.659Z,1528888957.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:37.985Z,1528888957.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:38.038Z,1528888958.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:38.386Z,1528888958.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:38.424Z,1528888958.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:38.781Z,1528888958.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:38.799Z,1528888958.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:39.178Z,1528888959.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:39.196Z,1528888959.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:39.589Z,1528888959.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:39.629Z,1528888959.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:39.990Z,1528888959.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:40.008Z,1528888960.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:40.385Z,1528888960.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:40.403Z,1528888960.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:40.782Z,1528888960.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:40.800Z,1528888960.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:41.175Z,1528888961.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:41.198Z,1528888961.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:41.586Z,1528888961.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:41.604Z,1528888961.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:41.989Z,1528888961.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:42.008Z,1528888962.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:42.387Z,1528888962.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:42.404Z,1528888962.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:42.783Z,1528888962.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:42.801Z,1528888962.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:43.179Z,1528888963.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:43.213Z,1528888963.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:43.586Z,1528888963.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:43.604Z,1528888963.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:43.989Z,1528888963.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:44.007Z,1528888964.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:44.389Z,1528888964.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:44.408Z,1528888964.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:44.776Z,1528888964.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:44.802Z,1528888964.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:45.179Z,1528888965.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:45.210Z,1528888965.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:45.589Z,1528888965.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:45.608Z,1528888965.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:45.990Z,1528888965.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:46.008Z,1528888966.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:46.386Z,1528888966.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:46.408Z,1528888966.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:46.784Z,1528888966.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:46.803Z,1528888966.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:47.181Z,1528888967.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:47.199Z,1528888967.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:47.590Z,1528888967.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:47.608Z,1528888967.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:47.990Z,1528888967.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:48.008Z,1528888968.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:48.386Z,1528888968.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:48.427Z,1528888968.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:48.779Z,1528888968.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:48.812Z,1528888968.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:49.179Z,1528888969.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:49.214Z,1528888969.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:49.589Z,1528888969.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:49.614Z,1528888969.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:49.995Z,1528888969.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:50.043Z,1528888970.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:50.395Z,1528888970.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:50.421Z,1528888970.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:50.776Z,1528888970.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:50.804Z,1528888970.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:51.175Z,1528888971.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:51.202Z,1528888971.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:51.597Z,1528888971.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:51.616Z,1528888971.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:51.997Z,1528888971.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:52.015Z,1528888972.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:52.396Z,1528888972.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:52.414Z,1528888972.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:52.776Z,1528888972.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:52.815Z,1528888972.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:53.171Z,1528888973.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:53.213Z,1528888973.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:53.586Z,1528888973.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:53.624Z,1528888973.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:53.994Z,1528888973.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:54.020Z,1528888974.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:54.387Z,1528888974.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:54.416Z,1528888974.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:54.775Z,1528888974.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:54.806Z,1528888974.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:55.175Z,1528888975.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:55.205Z,1528888975.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:55.585Z,1528888975.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:55.627Z,1528888975.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:55.993Z,1528888975.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:56.021Z,1528888976.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:56.395Z,1528888976.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:56.426Z,1528888976.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:56.780Z,1528888976.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:56.798Z,1528888976.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:57.178Z,1528888977.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:57.196Z,1528888977.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:57.589Z,1528888977.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:57.624Z,1528888977.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:57.989Z,1528888977.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:58.007Z,1528888978.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:58.386Z,1528888978.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:58.404Z,1528888978.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:58.780Z,1528888978.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:58.814Z,1528888978.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:59.182Z,1528888979.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:59.200Z,1528888979.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:59.586Z,1528888979.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:22:59.608Z,1528888979.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:22:59.990Z,1528888979.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:00.008Z,1528888980.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:00.386Z,1528888980.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:00.404Z,1528888980.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:00.779Z,1528888980.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:00.803Z,1528888980.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:01.183Z,1528888981.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:01.201Z,1528888981.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:01.587Z,1528888981.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:01.612Z,1528888981.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:01.990Z,1528888981.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:02.008Z,1528888982.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:02.394Z,1528888982.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:02.419Z,1528888982.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:02.776Z,1528888982.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:02.828Z,1528888982.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:03.175Z,1528888983.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:03.213Z,1528888983.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:03.595Z,1528888983.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:03.620Z,1528888983.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:03.995Z,1528888983.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:04.013Z,1528888984.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:04.391Z,1528888984.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:04.409Z,1528888984.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:04.776Z,1528888984.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:04.809Z,1528888984.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:05.171Z,1528888985.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:05.198Z,1528888985.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:05.591Z,1528888985.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:05.609Z,1528888985.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:05.994Z,1528888985.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:06.018Z,1528888986.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:06.388Z,1528888986.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:06.406Z,1528888986.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:06.786Z,1528888986.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:06.804Z,1528888986.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:07.175Z,1528888987.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:07.213Z,1528888987.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:07.591Z,1528888987.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:07.609Z,1528888987.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:07.996Z,1528888987.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:08.020Z,1528888988.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:08.396Z,1528888988.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:08.414Z,1528888988.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:08.786Z,1528888988.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:08.804Z,1528888988.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:09.175Z,1528888989.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:09.208Z,1528888989.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:09.595Z,1528888989.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:09.613Z,1528888989.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:09.991Z,1528888989.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:10.009Z,1528888990.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:10.391Z,1528888990.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:10.409Z,1528888990.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:10.776Z,1528888990.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:10.806Z,1528888990.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:11.176Z,1528888991.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:11.203Z,1528888991.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:11.575Z,1528888991.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:11.611Z,1528888991.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:11.996Z,1528888991.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:12.014Z,1528888992.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:12.391Z,1528888992.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:12.409Z,1528888992.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:12.792Z,1528888992.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:12.810Z,1528888992.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:13.175Z,1528888993.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:13.213Z,1528888993.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:13.575Z,1528888993.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:13.608Z,1528888993.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:13.980Z,1528888993.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:14.007Z,1528888994.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:14.379Z,1528888994.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:14.408Z,1528888994.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:14.795Z,1528888994.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:14.814Z,1528888994.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:15.199Z,1528888995.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:15.224Z,1528888995.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:15.600Z,1528888995.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:15.652Z,1528888995.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:18.701Z,1528888998.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:18.720Z,1528888998.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:18.835Z,1528888998.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:18.901Z,1528888998.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:19.256Z,1528888999.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:19.274Z,1528888999.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:19.652Z,1528888999.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:19.670Z,1528888999.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:20.047Z,1528889000.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:20.065Z,1528889000.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:20.431Z,1528889000.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:20.470Z,1528889000.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:20.832Z,1528889000.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:20.868Z,1528889000.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:21.231Z,1528889001.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:21.269Z,1528889001.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:21.645Z,1528889001.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:21.675Z,1528889001.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:22.041Z,1528889002.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:22.069Z,1528889002.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:22.441Z,1528889002.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:22.468Z,1528889002.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:22.832Z,1528889002.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:22.867Z,1528889002.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:23.235Z,1528889003.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:23.269Z,1528889003.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:23.650Z,1528889003.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:23.678Z,1528889003.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:24.049Z,1528889004.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:24.078Z,1528889004.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:24.446Z,1528889004.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:24.479Z,1528889004.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:24.834Z,1528889004.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:24.853Z,1528889004.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:25.234Z,1528889005.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:25.253Z,1528889005.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:25.645Z,1528889005.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:25.682Z,1528889005.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:26.045Z,1528889006.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:26.079Z,1528889006.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:26.445Z,1528889006.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:26.463Z,1528889006.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:26.838Z,1528889006.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:26.856Z,1528889006.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:27.237Z,1528889007.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:27.255Z,1528889007.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:27.645Z,1528889007.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:27.664Z,1528889007.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:28.045Z,1528889008.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:28.070Z,1528889008.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:28.446Z,1528889008.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:28.494Z,1528889008.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:28.838Z,1528889008.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:28.861Z,1528889008.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:29.231Z,1528889009.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:29.255Z,1528889009.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:29.646Z,1528889009.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:29.664Z,1528889009.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:30.047Z,1528889010.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:30.072Z,1528889010.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:30.448Z,1528889010.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:30.466Z,1528889010.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:30.836Z,1528889010.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:30.862Z,1528889010.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:31.235Z,1528889011.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:31.264Z,1528889011.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:31.642Z,1528889011.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:31.673Z,1528889011.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:32.050Z,1528889012.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:32.076Z,1528889012.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:32.452Z,1528889012.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:32.476Z,1528889012.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:32.832Z,1528889012.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:32.862Z,1528889012.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:33.242Z,1528889013.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:33.266Z,1528889013.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:33.652Z,1528889013.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:33.670Z,1528889013.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:34.048Z,1528889014.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:34.066Z,1528889014.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:34.448Z,1528889014.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:34.467Z,1528889014.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:34.832Z,1528889014.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:34.868Z,1528889014.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:35.228Z,1528889015.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:35.262Z,1528889015.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:35.653Z,1528889015.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:35.676Z,1528889015.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:36.053Z,1528889016.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:36.071Z,1528889016.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:36.446Z,1528889016.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:36.469Z,1528889016.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:36.831Z,1528889016.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:36.864Z,1528889016.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:37.227Z,1528889017.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:37.267Z,1528889017.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:37.642Z,1528889017.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:37.679Z,1528889017.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:38.050Z,1528889018.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:38.075Z,1528889018.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:38.453Z,1528889018.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:38.471Z,1528889018.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:38.828Z,1528889018.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:38.868Z,1528889018.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:39.231Z,1528889019.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:39.269Z,1528889019.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:39.641Z,1528889019.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:39.676Z,1528889019.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:40.042Z,1528889020.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:40.071Z,1528889020.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:40.441Z,1528889020.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:40.469Z,1528889020.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:40.469Z,1528889020.469 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 159
2018-06-13T11:23:40.469Z,1528889020.469 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:23:40.471Z,1528889020.471 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:40.471Z,1528889020.471 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 159
2018-06-13T11:23:40.471Z,1528889020.471 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:23:40.473Z,1528889020.473 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:40.473Z,1528889020.473 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 159
2018-06-13T11:23:40.473Z,1528889020.473 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:23:40.553Z,1528889020.553 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:23:40.554Z,1528889020.554 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:23:40.554Z,1528889020.554 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:23:40.832Z,1528889020.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:40.961Z,1528889020.961 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:23:40.961Z,1528889020.961 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 159
2018-06-13T11:23:40.962Z,1528889020.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:23:40.962Z,1528889020.962 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 159
2018-06-13T11:23:40.962Z,1528889020.962 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:23:40.962Z,1528889020.962 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 159
2018-06-13T11:23:41.230Z,1528889021.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:41.281Z,1528889021.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:23:41.282Z,1528889021.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:23:41.282Z,1528889021.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:23:41.282Z,1528889021.282 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:23:41.283Z,1528889021.283 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:23:41.283Z,1528889021.283 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:23:41.283Z,1528889021.283 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:23:41.284Z,1528889021.284 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:23:41.284Z,1528889021.284 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:23:41.644Z,1528889021.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:41.676Z,1528889021.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:23:41.682Z,1528889021.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:42.048Z,1528889022.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:42.066Z,1528889022.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:23:42.067Z,1528889022.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:42.442Z,1528889022.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:42.472Z,1528889022.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:23:42.473Z,1528889022.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:42.842Z,1528889022.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:42.859Z,1528889022.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:23:42.860Z,1528889022.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:43.227Z,1528889023.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:43.256Z,1528889023.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:23:43.257Z,1528889023.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:43.647Z,1528889023.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:43.665Z,1528889023.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:23:43.666Z,1528889023.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:44.051Z,1528889024.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:44.069Z,1528889024.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:23:44.070Z,1528889024.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:44.448Z,1528889024.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:44.465Z,1528889024.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:23:44.466Z,1528889024.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:44.828Z,1528889024.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:44.863Z,1528889024.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:23:44.864Z,1528889024.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:45.231Z,1528889025.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:45.267Z,1528889025.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:23:45.268Z,1528889025.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:45.631Z,1528889025.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:45.659Z,1528889025.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:23:45.660Z,1528889025.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:46.042Z,1528889026.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:46.064Z,1528889026.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:23:46.065Z,1528889026.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:46.451Z,1528889026.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:46.468Z,1528889026.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:23:46.469Z,1528889026.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:46.849Z,1528889026.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:46.866Z,1528889026.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:23:46.867Z,1528889026.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:47.227Z,1528889027.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:47.254Z,1528889027.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:23:47.255Z,1528889027.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:47.631Z,1528889027.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:47.658Z,1528889027.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:23:47.659Z,1528889027.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:48.030Z,1528889028.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:48.058Z,1528889028.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:23:48.059Z,1528889028.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:48.427Z,1528889028.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:48.454Z,1528889028.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:23:48.455Z,1528889028.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:48.847Z,1528889028.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:48.866Z,1528889028.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:23:48.867Z,1528889028.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:49.247Z,1528889029.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:49.264Z,1528889029.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:23:49.265Z,1528889029.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:49.646Z,1528889029.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:49.671Z,1528889029.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:23:49.672Z,1528889029.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:50.031Z,1528889030.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:50.058Z,1528889030.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:23:50.059Z,1528889030.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:50.427Z,1528889030.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:50.460Z,1528889030.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:23:50.461Z,1528889030.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:50.831Z,1528889030.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:50.858Z,1528889030.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:23:50.859Z,1528889030.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:51.232Z,1528889031.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:51.263Z,1528889031.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:23:51.264Z,1528889031.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:51.627Z,1528889031.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:51.664Z,1528889031.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:23:51.665Z,1528889031.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:52.048Z,1528889032.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:52.065Z,1528889032.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:23:52.066Z,1528889032.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:52.451Z,1528889032.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:52.469Z,1528889032.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:23:52.470Z,1528889032.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:52.851Z,1528889032.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:52.868Z,1528889032.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:23:52.869Z,1528889032.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:53.232Z,1528889033.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:53.259Z,1528889033.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:23:53.260Z,1528889033.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:53.631Z,1528889033.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:53.665Z,1528889033.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:23:53.666Z,1528889033.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:54.027Z,1528889034.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:54.068Z,1528889034.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:23:54.068Z,1528889034.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:54.435Z,1528889034.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:54.462Z,1528889034.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:23:54.463Z,1528889034.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:54.847Z,1528889034.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:54.865Z,1528889034.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:23:54.866Z,1528889034.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:55.241Z,1528889035.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:55.275Z,1528889035.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:23:55.276Z,1528889035.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:55.641Z,1528889035.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:55.668Z,1528889035.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:23:55.670Z,1528889035.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:56.031Z,1528889036.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:56.079Z,1528889036.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:23:56.080Z,1528889036.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:56.432Z,1528889036.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:56.449Z,1528889036.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:23:56.450Z,1528889036.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:56.835Z,1528889036.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:56.853Z,1528889036.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:23:56.854Z,1528889036.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:57.235Z,1528889037.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:57.252Z,1528889037.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:23:57.253Z,1528889037.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:57.634Z,1528889037.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:57.651Z,1528889037.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:23:57.652Z,1528889037.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:58.045Z,1528889038.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:58.063Z,1528889038.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:23:58.064Z,1528889038.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:58.442Z,1528889038.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:58.459Z,1528889038.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:23:58.460Z,1528889038.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:58.841Z,1528889038.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:58.863Z,1528889038.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:23:58.864Z,1528889038.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:59.234Z,1528889039.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:59.260Z,1528889039.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:23:59.261Z,1528889039.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:23:59.634Z,1528889039.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:23:59.651Z,1528889039.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:23:59.652Z,1528889039.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:00.034Z,1528889040.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:00.052Z,1528889040.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:24:00.052Z,1528889040.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:00.434Z,1528889040.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:00.452Z,1528889040.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T11:24:00.453Z,1528889040.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:00.842Z,1528889040.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:00.860Z,1528889040.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:01.241Z,1528889041.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:01.259Z,1528889041.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:01.642Z,1528889041.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:01.660Z,1528889041.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:02.037Z,1528889042.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:02.060Z,1528889042.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:02.437Z,1528889042.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:02.455Z,1528889042.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:02.836Z,1528889042.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:02.854Z,1528889042.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:03.239Z,1528889043.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:03.257Z,1528889043.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:03.638Z,1528889043.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:03.655Z,1528889043.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:04.046Z,1528889044.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:04.064Z,1528889044.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:04.445Z,1528889044.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:04.463Z,1528889044.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:04.845Z,1528889044.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:04.863Z,1528889044.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:05.236Z,1528889045.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:05.255Z,1528889045.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:05.637Z,1528889045.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:05.655Z,1528889045.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:06.036Z,1528889046.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:06.066Z,1528889046.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:06.437Z,1528889046.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:06.462Z,1528889046.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:06.840Z,1528889046.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:06.896Z,1528889046.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:07.251Z,1528889047.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:07.270Z,1528889047.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:07.647Z,1528889047.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:07.665Z,1528889047.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:08.043Z,1528889048.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:08.061Z,1528889048.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:08.428Z,1528889048.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:08.456Z,1528889048.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:08.838Z,1528889048.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:08.856Z,1528889048.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:09.236Z,1528889049.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:09.262Z,1528889049.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:09.635Z,1528889049.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:09.661Z,1528889049.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:10.048Z,1528889050.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:10.067Z,1528889050.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:10.450Z,1528889050.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:10.468Z,1528889050.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:10.853Z,1528889050.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:10.871Z,1528889050.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:11.237Z,1528889051.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:11.260Z,1528889051.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:11.635Z,1528889051.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:11.659Z,1528889051.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:12.036Z,1528889052.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:12.071Z,1528889052.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:12.437Z,1528889052.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:12.460Z,1528889052.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:12.850Z,1528889052.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:12.869Z,1528889052.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:13.249Z,1528889053.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:13.268Z,1528889053.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:13.651Z,1528889053.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:13.669Z,1528889053.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:14.041Z,1528889054.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:14.060Z,1528889054.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:14.436Z,1528889054.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:14.470Z,1528889054.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:14.843Z,1528889054.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:14.862Z,1528889054.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:15.236Z,1528889055.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:15.262Z,1528889055.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:15.644Z,1528889055.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:15.662Z,1528889055.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:18.770Z,1528889058.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:18.808Z,1528889058.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:18.925Z,1528889058.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:18.994Z,1528889058.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:19.341Z,1528889059.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:19.359Z,1528889059.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:19.720Z,1528889059.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:19.754Z,1528889059.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:20.116Z,1528889060.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:20.135Z,1528889060.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:20.519Z,1528889060.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:20.567Z,1528889060.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:20.930Z,1528889060.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:20.964Z,1528889060.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:21.334Z,1528889061.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:21.361Z,1528889061.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:21.730Z,1528889061.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:21.772Z,1528889061.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:22.113Z,1528889062.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:22.131Z,1528889062.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:22.518Z,1528889062.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:22.544Z,1528889062.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:22.920Z,1528889062.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:22.938Z,1528889062.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:23.317Z,1528889063.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:23.335Z,1528889063.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:23.730Z,1528889063.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:23.747Z,1528889063.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:24.130Z,1528889064.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:24.152Z,1528889064.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:24.523Z,1528889064.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:24.540Z,1528889064.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:24.920Z,1528889064.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:24.939Z,1528889064.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:25.321Z,1528889065.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:25.344Z,1528889065.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:25.730Z,1528889065.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:25.749Z,1528889065.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:26.129Z,1528889066.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:26.152Z,1528889066.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:26.530Z,1528889066.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:26.548Z,1528889066.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:26.922Z,1528889066.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:26.942Z,1528889066.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:27.319Z,1528889067.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:27.356Z,1528889067.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:27.731Z,1528889067.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:27.751Z,1528889067.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:28.130Z,1528889068.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:28.152Z,1528889068.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:28.530Z,1528889068.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:28.548Z,1528889068.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:28.922Z,1528889068.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:28.954Z,1528889068.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:29.321Z,1528889069.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:29.339Z,1528889069.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:29.732Z,1528889069.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:29.750Z,1528889069.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:30.135Z,1528889070.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:30.153Z,1528889070.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:30.526Z,1528889070.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:30.548Z,1528889070.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:30.919Z,1528889070.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:30.953Z,1528889070.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:31.315Z,1528889071.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:31.350Z,1528889071.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:31.732Z,1528889071.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:31.751Z,1528889071.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:32.134Z,1528889072.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:32.164Z,1528889072.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:32.537Z,1528889072.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:32.555Z,1528889072.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:32.916Z,1528889072.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:32.950Z,1528889072.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:33.315Z,1528889073.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:33.348Z,1528889073.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:33.730Z,1528889073.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:33.759Z,1528889073.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:34.125Z,1528889074.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:34.152Z,1528889074.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:34.522Z,1528889074.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:34.556Z,1528889074.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:34.916Z,1528889074.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:34.936Z,1528889074.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:35.319Z,1528889075.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:35.337Z,1528889075.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:35.730Z,1528889075.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:35.763Z,1528889075.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:36.133Z,1528889076.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:36.162Z,1528889076.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:36.526Z,1528889076.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:36.564Z,1528889076.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:36.918Z,1528889076.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:36.936Z,1528889076.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:37.317Z,1528889077.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:37.336Z,1528889077.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:37.725Z,1528889077.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:37.764Z,1528889077.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:38.129Z,1528889078.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:38.147Z,1528889078.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:38.530Z,1528889078.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:38.548Z,1528889078.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:38.920Z,1528889078.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:38.938Z,1528889078.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:39.318Z,1528889079.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:39.342Z,1528889079.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:39.730Z,1528889079.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:39.748Z,1528889079.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:40.129Z,1528889080.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:40.147Z,1528889080.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:40.526Z,1528889080.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:40.544Z,1528889080.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:40.920Z,1528889080.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:40.957Z,1528889080.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:41.315Z,1528889081.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:41.339Z,1528889081.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:41.726Z,1528889081.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:41.748Z,1528889081.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:42.129Z,1528889082.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:42.147Z,1528889082.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:42.526Z,1528889082.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:42.544Z,1528889082.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:42.921Z,1528889082.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:42.939Z,1528889082.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:43.323Z,1528889083.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:43.342Z,1528889083.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:43.715Z,1528889083.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:43.738Z,1528889083.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:44.130Z,1528889084.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:44.147Z,1528889084.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:44.530Z,1528889084.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:44.548Z,1528889084.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:44.926Z,1528889084.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:44.948Z,1528889084.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:45.319Z,1528889085.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:45.341Z,1528889085.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:45.722Z,1528889085.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:45.740Z,1528889085.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:46.116Z,1528889086.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:46.150Z,1528889086.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:46.519Z,1528889086.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:46.542Z,1528889086.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:46.931Z,1528889086.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:46.956Z,1528889086.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:47.330Z,1528889087.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:47.348Z,1528889087.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:47.730Z,1528889087.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:47.748Z,1528889087.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:48.122Z,1528889088.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:48.141Z,1528889088.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:48.515Z,1528889088.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:48.538Z,1528889088.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:48.911Z,1528889088.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:48.948Z,1528889088.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:49.316Z,1528889089.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:49.354Z,1528889089.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:49.715Z,1528889089.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:49.747Z,1528889089.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:50.132Z,1528889090.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:50.151Z,1528889090.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:50.535Z,1528889090.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:50.566Z,1528889090.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:50.922Z,1528889090.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:50.955Z,1528889090.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:51.315Z,1528889091.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:51.351Z,1528889091.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:51.715Z,1528889091.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:51.753Z,1528889091.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:52.116Z,1528889092.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:52.147Z,1528889092.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:52.515Z,1528889092.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:52.555Z,1528889092.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:52.936Z,1528889092.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:52.961Z,1528889092.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:53.332Z,1528889093.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:53.350Z,1528889093.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:53.732Z,1528889093.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:53.756Z,1528889093.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:54.115Z,1528889094.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:54.146Z,1528889094.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:54.515Z,1528889094.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:54.549Z,1528889094.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:54.919Z,1528889094.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:54.957Z,1528889094.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:55.316Z,1528889095.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:55.334Z,1528889095.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:55.715Z,1528889095.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:55.733Z,1528889095.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:56.130Z,1528889096.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:56.162Z,1528889096.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:56.533Z,1528889096.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:56.568Z,1528889096.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:56.930Z,1528889096.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:56.962Z,1528889096.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:57.319Z,1528889097.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:57.336Z,1528889097.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:57.719Z,1528889097.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:57.764Z,1528889097.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:58.119Z,1528889098.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:58.138Z,1528889098.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:58.518Z,1528889098.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:58.537Z,1528889098.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:58.929Z,1528889098.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:58.967Z,1528889098.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:59.333Z,1528889099.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:59.366Z,1528889099.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:24:59.730Z,1528889099.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:24:59.768Z,1528889099.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:00.118Z,1528889100.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:00.136Z,1528889100.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:00.519Z,1528889100.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:00.538Z,1528889100.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:00.919Z,1528889100.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:00.937Z,1528889100.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:01.320Z,1528889101.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:01.338Z,1528889101.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:01.719Z,1528889101.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:01.744Z,1528889101.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:02.129Z,1528889102.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:02.163Z,1528889102.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:02.533Z,1528889102.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:02.572Z,1528889102.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:02.930Z,1528889102.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:02.948Z,1528889102.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:03.321Z,1528889103.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:03.339Z,1528889103.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:03.722Z,1528889103.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:03.744Z,1528889103.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:04.117Z,1528889104.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:04.136Z,1528889104.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:04.520Z,1528889104.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:04.539Z,1528889104.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:04.929Z,1528889104.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:04.972Z,1528889104.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:05.327Z,1528889105.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:05.352Z,1528889105.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:05.726Z,1528889105.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:05.745Z,1528889105.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:06.122Z,1528889106.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:06.140Z,1528889106.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:06.514Z,1528889106.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:06.550Z,1528889106.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:06.914Z,1528889106.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:06.947Z,1528889106.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:07.326Z,1528889107.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:07.344Z,1528889107.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:07.715Z,1528889107.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:07.738Z,1528889107.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:08.130Z,1528889108.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:08.148Z,1528889108.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:08.529Z,1528889108.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:08.552Z,1528889108.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:08.931Z,1528889108.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:08.949Z,1528889108.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:09.319Z,1528889109.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:09.343Z,1528889109.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:09.711Z,1528889109.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:09.746Z,1528889109.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:10.112Z,1528889110.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:10.147Z,1528889110.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:10.515Z,1528889110.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:10.549Z,1528889110.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:10.935Z,1528889110.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:10.962Z,1528889110.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:11.336Z,1528889111.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:11.354Z,1528889111.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:11.721Z,1528889111.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:11.757Z,1528889111.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:12.115Z,1528889112.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:12.146Z,1528889112.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:12.515Z,1528889112.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:12.549Z,1528889112.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:12.915Z,1528889112.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:12.960Z,1528889112.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:13.316Z,1528889113.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:13.340Z,1528889113.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:13.718Z,1528889113.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:13.736Z,1528889113.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:14.129Z,1528889114.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:14.163Z,1528889114.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:14.533Z,1528889114.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:14.567Z,1528889114.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:14.933Z,1528889114.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:14.951Z,1528889114.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:15.324Z,1528889115.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:15.342Z,1528889115.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:15.725Z,1528889115.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:15.743Z,1528889115.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:18.837Z,1528889118.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:18.874Z,1528889118.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:18.995Z,1528889118.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:19.032Z,1528889119.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:19.418Z,1528889119.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:19.436Z,1528889119.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:19.810Z,1528889119.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:19.834Z,1528889119.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:20.202Z,1528889120.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:20.232Z,1528889120.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:20.591Z,1528889120.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:20.618Z,1528889120.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:20.992Z,1528889120.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:21.010Z,1528889121.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:21.396Z,1528889121.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:21.415Z,1528889121.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:21.806Z,1528889121.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:21.840Z,1528889121.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:22.206Z,1528889122.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:22.224Z,1528889122.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:22.602Z,1528889122.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:22.620Z,1528889122.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:22.996Z,1528889122.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:23.022Z,1528889123.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:23.393Z,1528889123.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:23.416Z,1528889123.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:23.802Z,1528889123.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:23.820Z,1528889123.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:24.207Z,1528889124.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:24.224Z,1528889124.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:24.602Z,1528889124.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:24.620Z,1528889124.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:24.996Z,1528889124.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:25.022Z,1528889125.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:25.398Z,1528889125.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:25.416Z,1528889125.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:25.802Z,1528889125.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:25.824Z,1528889125.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:26.207Z,1528889126.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:26.225Z,1528889126.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:26.606Z,1528889126.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:26.631Z,1528889126.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:26.998Z,1528889126.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:27.016Z,1528889127.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:27.395Z,1528889127.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:27.428Z,1528889127.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:27.811Z,1528889127.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:27.829Z,1528889127.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:28.208Z,1528889128.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:28.227Z,1528889128.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:28.607Z,1528889128.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:28.625Z,1528889128.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:29.001Z,1528889129.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:29.019Z,1528889129.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:29.397Z,1528889129.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:29.415Z,1528889129.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:29.807Z,1528889129.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:29.825Z,1528889129.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:30.211Z,1528889130.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:30.230Z,1528889130.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:30.604Z,1528889130.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:30.622Z,1528889130.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:30.996Z,1528889130.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:31.016Z,1528889131.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:31.398Z,1528889131.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:31.423Z,1528889131.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:31.787Z,1528889131.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:31.824Z,1528889131.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:32.207Z,1528889132.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:32.225Z,1528889132.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:32.611Z,1528889132.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:32.629Z,1528889132.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:33.007Z,1528889133.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:33.026Z,1528889133.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:33.396Z,1528889133.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:33.415Z,1528889133.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:33.798Z,1528889133.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:33.822Z,1528889133.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:34.188Z,1528889134.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:34.219Z,1528889134.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:34.597Z,1528889134.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:34.615Z,1528889134.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:35.009Z,1528889135.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:35.027Z,1528889135.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:35.408Z,1528889135.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:35.426Z,1528889135.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:35.809Z,1528889135.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:35.827Z,1528889135.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:36.198Z,1528889136.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:36.217Z,1528889136.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:36.598Z,1528889136.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:36.620Z,1528889136.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:36.996Z,1528889136.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:37.015Z,1528889137.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:37.388Z,1528889137.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:37.417Z,1528889137.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:37.797Z,1528889137.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:37.816Z,1528889137.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:38.208Z,1528889138.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:38.226Z,1528889138.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:38.612Z,1528889138.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:38.630Z,1528889138.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:39.004Z,1528889139.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:39.022Z,1528889139.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:39.398Z,1528889139.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:39.415Z,1528889139.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:39.795Z,1528889139.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:39.824Z,1528889139.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:40.192Z,1528889140.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:40.220Z,1528889140.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:40.591Z,1528889140.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:40.620Z,1528889140.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:41.013Z,1528889141.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:41.032Z,1528889141.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:41.404Z,1528889141.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:41.439Z,1528889141.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:41.813Z,1528889141.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:41.830Z,1528889141.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:42.191Z,1528889142.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:42.230Z,1528889142.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:42.587Z,1528889142.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:42.622Z,1528889142.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:42.991Z,1528889142.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:43.028Z,1528889143.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:43.396Z,1528889143.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:43.427Z,1528889143.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:43.791Z,1528889143.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:43.810Z,1528889143.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:44.207Z,1528889144.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:44.240Z,1528889144.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:44.610Z,1528889144.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:44.641Z,1528889144.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:45.007Z,1528889145.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:45.044Z,1528889145.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:45.392Z,1528889145.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:45.410Z,1528889145.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:45.791Z,1528889145.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:45.810Z,1528889145.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:46.191Z,1528889146.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:46.210Z,1528889146.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:46.595Z,1528889146.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:46.620Z,1528889146.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:47.002Z,1528889147.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:47.020Z,1528889147.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:47.402Z,1528889147.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:47.420Z,1528889147.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:47.810Z,1528889147.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:47.852Z,1528889147.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:48.195Z,1528889148.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:48.214Z,1528889148.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:48.592Z,1528889148.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:48.624Z,1528889148.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:48.996Z,1528889148.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:49.014Z,1528889149.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:49.394Z,1528889149.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:49.414Z,1528889149.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:49.790Z,1528889149.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:49.826Z,1528889149.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:50.207Z,1528889150.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:50.225Z,1528889150.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:50.605Z,1528889150.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:50.624Z,1528889150.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:51.002Z,1528889151.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:51.021Z,1528889151.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:51.390Z,1528889151.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:51.420Z,1528889151.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:51.793Z,1528889151.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:51.816Z,1528889151.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:52.191Z,1528889152.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:52.217Z,1528889152.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:52.595Z,1528889152.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:52.628Z,1528889152.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:53.009Z,1528889153.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:53.026Z,1528889153.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:53.408Z,1528889153.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:53.426Z,1528889153.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:53.808Z,1528889153.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:53.832Z,1528889153.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:54.198Z,1528889154.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:54.217Z,1528889154.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:54.587Z,1528889154.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:54.615Z,1528889154.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:54.998Z,1528889154.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:55.015Z,1528889155.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:55.398Z,1528889155.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:55.420Z,1528889155.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:55.787Z,1528889155.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:55.823Z,1528889155.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:56.207Z,1528889156.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:56.226Z,1528889156.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:56.608Z,1528889156.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:56.632Z,1528889156.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:57.005Z,1528889157.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:57.023Z,1528889157.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:57.396Z,1528889157.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:57.415Z,1528889157.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:57.798Z,1528889157.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:57.816Z,1528889157.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:58.188Z,1528889158.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:58.221Z,1528889158.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:58.596Z,1528889158.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:58.615Z,1528889158.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:59.009Z,1528889159.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:59.026Z,1528889159.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:59.408Z,1528889159.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:59.432Z,1528889159.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:25:59.802Z,1528889159.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:25:59.832Z,1528889159.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:00.191Z,1528889160.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:00.225Z,1528889160.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:00.591Z,1528889160.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:00.619Z,1528889160.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:00.987Z,1528889160.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:01.015Z,1528889161.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:01.388Z,1528889161.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:01.425Z,1528889161.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:01.788Z,1528889161.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:01.829Z,1528889161.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:02.208Z,1528889162.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:02.226Z,1528889162.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:02.612Z,1528889162.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:02.630Z,1528889162.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:03.005Z,1528889163.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:03.022Z,1528889163.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:03.391Z,1528889163.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:03.419Z,1528889163.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:03.791Z,1528889163.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:03.821Z,1528889163.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:04.192Z,1528889164.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:04.220Z,1528889164.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:04.587Z,1528889164.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:04.624Z,1528889164.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:05.012Z,1528889165.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:05.030Z,1528889165.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:05.406Z,1528889165.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:05.429Z,1528889165.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:05.808Z,1528889165.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:05.827Z,1528889165.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:06.187Z,1528889166.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:06.226Z,1528889166.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:06.595Z,1528889166.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:06.632Z,1528889166.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:06.991Z,1528889166.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:07.029Z,1528889167.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:07.391Z,1528889167.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:07.432Z,1528889167.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:07.791Z,1528889167.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:07.826Z,1528889167.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:08.202Z,1528889168.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:08.236Z,1528889168.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:08.605Z,1528889168.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:08.634Z,1528889168.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:09.006Z,1528889169.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:09.034Z,1528889169.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:09.391Z,1528889169.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:09.409Z,1528889169.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:09.792Z,1528889169.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:09.831Z,1528889169.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:10.194Z,1528889170.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:10.220Z,1528889170.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:10.594Z,1528889170.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:10.613Z,1528889170.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:11.005Z,1528889171.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:11.023Z,1528889171.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:11.406Z,1528889171.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:11.424Z,1528889171.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:11.802Z,1528889171.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:11.820Z,1528889171.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:12.198Z,1528889172.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:12.216Z,1528889172.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:12.597Z,1528889172.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:12.623Z,1528889172.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:12.995Z,1528889172.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:13.031Z,1528889173.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:13.399Z,1528889173.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:13.416Z,1528889173.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:13.797Z,1528889173.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:13.823Z,1528889173.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:14.206Z,1528889174.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:14.224Z,1528889174.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:14.610Z,1528889174.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:14.658Z,1528889174.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:17.718Z,1528889177.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:17.756Z,1528889177.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:17.879Z,1528889177.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:17.929Z,1528889177.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:18.280Z,1528889178.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:18.308Z,1528889178.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:18.680Z,1528889178.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:18.709Z,1528889178.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:19.092Z,1528889179.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:19.109Z,1528889179.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:19.495Z,1528889179.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:19.520Z,1528889179.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:19.891Z,1528889179.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:19.909Z,1528889179.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:20.275Z,1528889180.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:20.311Z,1528889180.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:20.675Z,1528889180.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:20.710Z,1528889180.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:21.080Z,1528889181.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:21.107Z,1528889181.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:21.479Z,1528889181.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:21.506Z,1528889181.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:21.896Z,1528889181.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:21.914Z,1528889181.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:22.296Z,1528889182.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:22.314Z,1528889182.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:22.691Z,1528889182.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:22.709Z,1528889182.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:23.076Z,1528889183.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:23.108Z,1528889183.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:23.476Z,1528889183.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:23.516Z,1528889183.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:23.891Z,1528889183.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:23.909Z,1528889183.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:24.295Z,1528889184.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:24.312Z,1528889184.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:24.691Z,1528889184.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:24.709Z,1528889184.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:25.079Z,1528889185.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:25.107Z,1528889185.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:25.475Z,1528889185.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:25.509Z,1528889185.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:25.892Z,1528889185.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:25.916Z,1528889185.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:26.300Z,1528889186.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:26.324Z,1528889186.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:26.696Z,1528889186.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:26.720Z,1528889186.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:27.075Z,1528889187.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:27.113Z,1528889187.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:27.475Z,1528889187.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:27.509Z,1528889187.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:27.875Z,1528889187.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:27.893Z,1528889187.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:28.286Z,1528889188.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:28.318Z,1528889188.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:28.689Z,1528889188.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:28.714Z,1528889188.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:29.093Z,1528889189.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:29.120Z,1528889189.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:29.479Z,1528889189.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:29.497Z,1528889189.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:29.879Z,1528889189.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:29.897Z,1528889189.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:30.280Z,1528889190.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:30.326Z,1528889190.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:30.679Z,1528889190.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:30.697Z,1528889190.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:31.090Z,1528889191.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:31.122Z,1528889191.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:31.494Z,1528889191.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:31.521Z,1528889191.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:31.890Z,1528889191.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:31.922Z,1528889191.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:32.278Z,1528889192.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:32.297Z,1528889192.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:32.679Z,1528889192.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:32.698Z,1528889192.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:33.074Z,1528889193.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:33.092Z,1528889193.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:33.479Z,1528889193.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:33.524Z,1528889193.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:33.879Z,1528889193.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:33.896Z,1528889193.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:34.289Z,1528889194.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:34.324Z,1528889194.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:34.690Z,1528889194.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:34.728Z,1528889194.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:35.091Z,1528889195.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:35.136Z,1528889195.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:35.477Z,1528889195.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:35.500Z,1528889195.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:35.874Z,1528889195.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:35.908Z,1528889195.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:36.280Z,1528889196.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:36.308Z,1528889196.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:36.680Z,1528889196.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:36.698Z,1528889196.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:37.085Z,1528889197.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:37.105Z,1528889197.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:37.485Z,1528889197.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:37.504Z,1528889197.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:37.883Z,1528889197.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:37.901Z,1528889197.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:38.280Z,1528889198.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:38.297Z,1528889198.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:38.682Z,1528889198.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:38.700Z,1528889198.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:39.075Z,1528889199.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:39.098Z,1528889199.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:39.480Z,1528889199.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:39.500Z,1528889199.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:39.882Z,1528889199.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:39.900Z,1528889199.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:40.285Z,1528889200.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:40.303Z,1528889200.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:40.689Z,1528889200.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:40.707Z,1528889200.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:41.089Z,1528889201.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:41.107Z,1528889201.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:41.475Z,1528889201.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:41.498Z,1528889201.498 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:41.498Z,1528889201.498 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 160
2018-06-13T11:26:41.498Z,1528889201.498 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:26:41.500Z,1528889201.500 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:41.500Z,1528889201.500 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 160
2018-06-13T11:26:41.500Z,1528889201.500 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:26:41.502Z,1528889201.502 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:41.502Z,1528889201.502 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 160
2018-06-13T11:26:41.502Z,1528889201.502 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:26:41.577Z,1528889201.577 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:26:41.577Z,1528889201.577 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:26:41.578Z,1528889201.578 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:26:41.878Z,1528889201.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:41.985Z,1528889201.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:26:41.985Z,1528889201.985 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 160
2018-06-13T11:26:41.986Z,1528889201.986 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:26:41.986Z,1528889201.986 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 160
2018-06-13T11:26:41.986Z,1528889201.986 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:26:41.986Z,1528889201.986 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 160
2018-06-13T11:26:42.278Z,1528889202.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:42.315Z,1528889202.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:26:42.315Z,1528889202.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:26:42.316Z,1528889202.316 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:26:42.316Z,1528889202.316 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:26:42.321Z,1528889202.321 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:26:42.321Z,1528889202.321 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:26:42.321Z,1528889202.321 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:26:42.322Z,1528889202.322 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:26:42.322Z,1528889202.322 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:26:42.676Z,1528889202.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:42.703Z,1528889202.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:26:42.704Z,1528889202.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:43.095Z,1528889203.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:43.112Z,1528889203.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:26:43.114Z,1528889203.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:43.496Z,1528889203.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:43.513Z,1528889203.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:26:43.514Z,1528889203.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:43.886Z,1528889203.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:43.912Z,1528889203.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:26:43.913Z,1528889203.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:44.275Z,1528889204.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:44.311Z,1528889204.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:26:44.311Z,1528889204.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:44.676Z,1528889204.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:44.707Z,1528889204.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:26:44.708Z,1528889204.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:45.075Z,1528889205.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:45.102Z,1528889205.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:26:45.103Z,1528889205.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:45.471Z,1528889205.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:45.508Z,1528889205.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:26:45.513Z,1528889205.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:45.875Z,1528889205.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:45.917Z,1528889205.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:26:45.918Z,1528889205.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:46.288Z,1528889206.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:46.305Z,1528889206.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:26:46.306Z,1528889206.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:46.696Z,1528889206.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:46.714Z,1528889206.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:26:46.714Z,1528889206.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:47.096Z,1528889207.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:47.120Z,1528889207.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:26:47.121Z,1528889207.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:47.479Z,1528889207.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:47.506Z,1528889207.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:26:47.507Z,1528889207.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:47.875Z,1528889207.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:47.909Z,1528889207.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:26:47.910Z,1528889207.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:48.276Z,1528889208.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:48.316Z,1528889208.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:26:48.321Z,1528889208.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:48.675Z,1528889208.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:48.708Z,1528889208.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:26:48.714Z,1528889208.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:49.085Z,1528889209.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:49.112Z,1528889209.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:26:49.113Z,1528889209.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:49.489Z,1528889209.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:49.518Z,1528889209.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:26:49.519Z,1528889209.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:49.882Z,1528889209.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:49.919Z,1528889209.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:26:49.920Z,1528889209.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:50.275Z,1528889210.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:50.292Z,1528889210.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:26:50.293Z,1528889210.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:50.679Z,1528889210.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:50.697Z,1528889210.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:26:50.698Z,1528889210.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:51.074Z,1528889211.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:51.092Z,1528889211.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:26:51.093Z,1528889211.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:51.478Z,1528889211.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:51.504Z,1528889211.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:26:51.521Z,1528889211.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:51.878Z,1528889211.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:51.896Z,1528889211.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:26:51.897Z,1528889211.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:52.286Z,1528889212.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:52.303Z,1528889212.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:26:52.304Z,1528889212.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:52.689Z,1528889212.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:52.707Z,1528889212.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:26:52.708Z,1528889212.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:53.089Z,1528889213.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:53.107Z,1528889213.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:26:53.108Z,1528889213.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:53.475Z,1528889213.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:53.497Z,1528889213.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:26:53.498Z,1528889213.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:53.880Z,1528889213.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:53.897Z,1528889213.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:26:53.898Z,1528889213.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:54.275Z,1528889214.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:54.301Z,1528889214.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:26:54.302Z,1528889214.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:54.681Z,1528889214.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:54.699Z,1528889214.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:26:54.700Z,1528889214.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:55.090Z,1528889215.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:55.107Z,1528889215.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:26:55.108Z,1528889215.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:55.489Z,1528889215.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:55.512Z,1528889215.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:26:55.513Z,1528889215.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:55.887Z,1528889215.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:55.905Z,1528889215.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:26:55.906Z,1528889215.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:56.279Z,1528889216.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:56.297Z,1528889216.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:26:56.298Z,1528889216.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:56.682Z,1528889216.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:56.704Z,1528889216.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:26:56.705Z,1528889216.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:57.081Z,1528889217.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:57.099Z,1528889217.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:26:57.100Z,1528889217.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:57.482Z,1528889217.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:57.499Z,1528889217.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:26:57.500Z,1528889217.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:57.879Z,1528889217.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:57.909Z,1528889217.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:26:57.910Z,1528889217.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:58.291Z,1528889218.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:58.310Z,1528889218.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:26:58.311Z,1528889218.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:58.695Z,1528889218.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:58.712Z,1528889218.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:26:58.713Z,1528889218.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:59.096Z,1528889219.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:59.114Z,1528889219.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:26:59.115Z,1528889219.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:59.471Z,1528889219.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:59.498Z,1528889219.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:26:59.499Z,1528889219.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:26:59.875Z,1528889219.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:26:59.902Z,1528889219.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:26:59.903Z,1528889219.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:00.276Z,1528889220.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:00.303Z,1528889220.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:27:00.304Z,1528889220.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:00.671Z,1528889220.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:00.707Z,1528889220.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:27:00.708Z,1528889220.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:01.089Z,1528889221.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:01.113Z,1528889221.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:27:01.114Z,1528889221.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:01.496Z,1528889221.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:01.514Z,1528889221.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:01.891Z,1528889221.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:01.909Z,1528889221.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:02.275Z,1528889222.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:02.313Z,1528889222.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:02.675Z,1528889222.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:02.706Z,1528889222.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:03.071Z,1528889223.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:03.104Z,1528889223.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:03.475Z,1528889223.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:03.508Z,1528889223.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:03.875Z,1528889223.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:03.909Z,1528889223.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:04.285Z,1528889224.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:04.319Z,1528889224.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:04.689Z,1528889224.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:04.723Z,1528889224.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:05.085Z,1528889225.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:05.126Z,1528889225.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:05.471Z,1528889225.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:05.489Z,1528889225.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:05.875Z,1528889225.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:05.893Z,1528889225.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:06.276Z,1528889226.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:06.312Z,1528889226.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:06.682Z,1528889226.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:06.724Z,1528889226.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:07.089Z,1528889227.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:07.107Z,1528889227.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:07.497Z,1528889227.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:07.531Z,1528889227.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:07.883Z,1528889227.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:07.913Z,1528889227.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:08.279Z,1528889228.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:08.310Z,1528889228.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:08.682Z,1528889228.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:08.708Z,1528889228.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:09.083Z,1528889229.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:09.101Z,1528889229.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:09.483Z,1528889229.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:09.500Z,1528889229.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:09.880Z,1528889229.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:09.906Z,1528889229.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:10.287Z,1528889230.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:10.305Z,1528889230.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:10.691Z,1528889230.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:10.709Z,1528889230.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:11.091Z,1528889231.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:11.110Z,1528889231.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:11.471Z,1528889231.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:11.513Z,1528889231.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:11.885Z,1528889231.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:11.904Z,1528889231.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:12.280Z,1528889232.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:12.315Z,1528889232.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:12.672Z,1528889232.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:12.715Z,1528889232.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:13.092Z,1528889233.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:13.110Z,1528889233.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:13.496Z,1528889233.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:13.515Z,1528889233.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:13.893Z,1528889233.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:13.911Z,1528889233.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:14.286Z,1528889234.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:14.308Z,1528889234.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:14.311Z,1528889234.311 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T11:27:14.311Z,1528889234.311 [Default:CheckIn:C.Wait] Stopped
2018-06-13T11:27:14.311Z,1528889234.311 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T11:27:14.311Z,1528889234.311 [Default:CheckIn:D] Running Loop=1
2018-06-13T11:27:14.679Z,1528889234.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:14.723Z,1528889234.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:14.726Z,1528889234.726 [Default:CheckIn:D] Stopped
2018-06-13T11:27:14.727Z,1528889234.727 [Default:CheckIn:E] Running Loop=1
2018-06-13T11:27:17.854Z,1528889237.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:17.872Z,1528889237.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:17.876Z,1528889237.876 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 480.021354 min 
2018-06-13T11:27:17.876Z,1528889237.876 [Default:CheckIn:E] Stopped
2018-06-13T11:27:17.876Z,1528889237.876 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T11:27:17.876Z,1528889237.876 [Default:CheckIn] Stopped
2018-06-13T11:27:17.876Z,1528889237.876 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T11:27:17.877Z,1528889237.877 [Default:CheckIn](INFO): Running loop #47
2018-06-13T11:27:17.877Z,1528889237.877 [Default:CheckIn] Running Loop=47
2018-06-13T11:27:17.877Z,1528889237.877 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T11:27:17.877Z,1528889237.877 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T11:27:18.010Z,1528889238.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:18.057Z,1528889238.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:18.417Z,1528889238.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:18.435Z,1528889238.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:18.817Z,1528889238.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:18.835Z,1528889238.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:19.210Z,1528889239.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:19.233Z,1528889239.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:19.610Z,1528889239.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:19.628Z,1528889239.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:20.007Z,1528889240.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:20.025Z,1528889240.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:20.404Z,1528889240.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:20.434Z,1528889240.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:20.803Z,1528889240.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:20.829Z,1528889240.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:21.215Z,1528889241.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:21.233Z,1528889241.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:21.619Z,1528889241.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:21.637Z,1528889241.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:22.021Z,1528889242.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:22.039Z,1528889242.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:22.395Z,1528889242.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:22.436Z,1528889242.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:22.803Z,1528889242.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:22.827Z,1528889242.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:23.204Z,1528889243.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:23.235Z,1528889243.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:23.595Z,1528889243.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:23.636Z,1528889243.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:24.018Z,1528889244.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:24.044Z,1528889244.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:24.420Z,1528889244.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:24.444Z,1528889244.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:24.821Z,1528889244.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:24.839Z,1528889244.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:25.200Z,1528889245.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:25.230Z,1528889245.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:25.600Z,1528889245.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:25.633Z,1528889245.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:26.018Z,1528889246.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:26.037Z,1528889246.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:26.420Z,1528889246.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:26.438Z,1528889246.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:26.821Z,1528889246.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:26.844Z,1528889246.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:27.200Z,1528889247.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:27.231Z,1528889247.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:27.599Z,1528889247.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:27.635Z,1528889247.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:28.019Z,1528889248.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:28.037Z,1528889248.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:28.419Z,1528889248.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:28.438Z,1528889248.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:28.805Z,1528889248.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:28.844Z,1528889248.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:29.200Z,1528889249.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:29.245Z,1528889249.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:29.600Z,1528889249.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:29.641Z,1528889249.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:30.009Z,1528889250.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:30.036Z,1528889250.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:30.413Z,1528889250.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:30.443Z,1528889250.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:30.809Z,1528889250.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:30.836Z,1528889250.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:31.200Z,1528889251.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:31.225Z,1528889251.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:31.600Z,1528889251.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:31.640Z,1528889251.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:32.013Z,1528889252.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:32.047Z,1528889252.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:32.417Z,1528889252.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:32.444Z,1528889252.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:32.817Z,1528889252.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:32.846Z,1528889252.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:33.204Z,1528889253.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:33.222Z,1528889253.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:33.602Z,1528889253.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:33.620Z,1528889253.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:34.013Z,1528889254.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:34.047Z,1528889254.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:34.417Z,1528889254.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:34.451Z,1528889254.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:34.810Z,1528889254.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:34.827Z,1528889254.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:35.206Z,1528889255.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:35.228Z,1528889255.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:35.604Z,1528889255.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:35.622Z,1528889255.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:36.009Z,1528889256.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:36.028Z,1528889256.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:36.413Z,1528889256.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:36.432Z,1528889256.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:36.806Z,1528889256.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:36.828Z,1528889256.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:37.204Z,1528889257.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:37.226Z,1528889257.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:37.603Z,1528889257.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:37.635Z,1528889257.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:38.010Z,1528889258.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:38.032Z,1528889258.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:38.414Z,1528889258.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:38.432Z,1528889258.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:38.813Z,1528889258.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:38.831Z,1528889258.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:39.206Z,1528889259.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:39.224Z,1528889259.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:39.603Z,1528889259.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:39.625Z,1528889259.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:40.013Z,1528889260.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:40.032Z,1528889260.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:40.413Z,1528889260.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:40.437Z,1528889260.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:40.810Z,1528889260.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:40.832Z,1528889260.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:41.204Z,1528889261.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:41.231Z,1528889261.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:41.600Z,1528889261.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:41.619Z,1528889261.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:42.014Z,1528889262.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:42.031Z,1528889262.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:42.414Z,1528889262.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:42.440Z,1528889262.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:42.815Z,1528889262.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:42.833Z,1528889262.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:43.205Z,1528889263.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:43.232Z,1528889263.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:43.605Z,1528889263.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:43.624Z,1528889263.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:44.016Z,1528889264.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:44.034Z,1528889264.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:44.418Z,1528889264.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:44.435Z,1528889264.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:44.819Z,1528889264.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:44.837Z,1528889264.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:45.206Z,1528889265.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:45.224Z,1528889265.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:45.605Z,1528889265.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:45.628Z,1528889265.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:46.020Z,1528889266.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:46.038Z,1528889266.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:46.415Z,1528889266.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:46.433Z,1528889266.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:46.815Z,1528889266.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:46.833Z,1528889266.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:47.199Z,1528889267.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:47.238Z,1528889267.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:47.600Z,1528889267.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:47.630Z,1528889267.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:47.999Z,1528889267.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:48.035Z,1528889268.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:48.419Z,1528889268.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:48.450Z,1528889268.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:48.816Z,1528889268.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:48.834Z,1528889268.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:49.215Z,1528889269.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:49.233Z,1528889269.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:49.599Z,1528889269.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:49.636Z,1528889269.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:49.999Z,1528889269.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:50.032Z,1528889270.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:50.400Z,1528889270.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:50.435Z,1528889270.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:50.803Z,1528889270.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:50.832Z,1528889270.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:51.216Z,1528889271.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:51.240Z,1528889271.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:51.618Z,1528889271.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:51.636Z,1528889271.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:52.020Z,1528889272.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:52.039Z,1528889272.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:52.399Z,1528889272.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:52.431Z,1528889272.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:52.800Z,1528889272.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:52.831Z,1528889272.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:53.199Z,1528889273.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:53.233Z,1528889273.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:53.600Z,1528889273.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:53.632Z,1528889273.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:53.999Z,1528889273.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:54.031Z,1528889274.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:54.420Z,1528889274.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:54.439Z,1528889274.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:54.808Z,1528889274.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:54.835Z,1528889274.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:55.216Z,1528889275.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:55.233Z,1528889275.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:55.603Z,1528889275.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:55.633Z,1528889275.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:55.999Z,1528889275.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:56.031Z,1528889276.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:56.400Z,1528889276.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:56.431Z,1528889276.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:56.799Z,1528889276.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:56.833Z,1528889276.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:57.216Z,1528889277.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:57.234Z,1528889277.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:57.618Z,1528889277.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:57.642Z,1528889277.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:58.020Z,1528889278.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:58.038Z,1528889278.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:58.396Z,1528889278.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:58.422Z,1528889278.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:58.799Z,1528889278.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:58.830Z,1528889278.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:59.204Z,1528889279.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:59.238Z,1528889279.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:27:59.600Z,1528889279.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:27:59.619Z,1528889279.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:00.003Z,1528889280.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:00.021Z,1528889280.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:00.386Z,1528889280.386 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T11:28:00.386Z,1528889280.386 [NAL9602] Data Fault, FailCount= 4
2018-06-13T11:28:00.386Z,1528889280.386 [NAL9602](ERROR): Data Fault
2018-06-13T11:28:00.404Z,1528889280.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:00.422Z,1528889280.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:00.521Z,1528889280.521 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T11:28:00.781Z,1528889280.781 [NAL9602](INFO): Powering down
2018-06-13T11:28:00.798Z,1528889280.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:00.824Z,1528889280.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:01.198Z,1528889281.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:01.224Z,1528889281.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:01.604Z,1528889281.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:01.623Z,1528889281.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:01.705Z,1528889281.705 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T11:28:01.705Z,1528889281.705 [NAL9602] No Fault, FailCount= 4
2018-06-13T11:28:02.000Z,1528889282.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:02.019Z,1528889282.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:02.403Z,1528889282.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:02.440Z,1528889282.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:02.805Z,1528889282.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:02.823Z,1528889282.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:03.202Z,1528889283.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:03.220Z,1528889283.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:03.606Z,1528889283.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:03.624Z,1528889283.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:04.002Z,1528889284.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:04.020Z,1528889284.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:04.400Z,1528889284.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:04.425Z,1528889284.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:04.804Z,1528889284.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:04.847Z,1528889284.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:05.201Z,1528889285.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:05.220Z,1528889285.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:05.600Z,1528889285.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:05.619Z,1528889285.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:06.003Z,1528889286.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:06.028Z,1528889286.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:06.400Z,1528889286.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:06.424Z,1528889286.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:06.800Z,1528889286.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:06.819Z,1528889286.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:07.206Z,1528889287.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:07.224Z,1528889287.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:07.600Z,1528889287.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:07.624Z,1528889287.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:08.001Z,1528889288.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:08.019Z,1528889288.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:08.404Z,1528889288.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:08.422Z,1528889288.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:08.801Z,1528889288.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:08.818Z,1528889288.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:09.201Z,1528889289.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:09.220Z,1528889289.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:09.604Z,1528889289.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:09.622Z,1528889289.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:10.000Z,1528889290.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:10.024Z,1528889290.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:10.400Z,1528889290.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:10.418Z,1528889290.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:10.797Z,1528889290.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:10.830Z,1528889290.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:11.200Z,1528889291.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:11.218Z,1528889291.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:11.600Z,1528889291.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:11.618Z,1528889291.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:12.006Z,1528889292.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:12.023Z,1528889292.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:12.400Z,1528889292.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:12.424Z,1528889292.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:12.800Z,1528889292.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:12.818Z,1528889292.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:13.205Z,1528889293.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:13.228Z,1528889293.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:13.600Z,1528889293.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:13.624Z,1528889293.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:13.998Z,1528889293.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:14.023Z,1528889294.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:14.409Z,1528889294.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:14.427Z,1528889294.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:14.804Z,1528889294.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:14.822Z,1528889294.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:17.917Z,1528889297.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:17.935Z,1528889297.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:18.069Z,1528889298.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:18.111Z,1528889298.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:18.460Z,1528889298.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:18.479Z,1528889298.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:18.861Z,1528889298.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:18.879Z,1528889298.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:19.260Z,1528889299.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:19.284Z,1528889299.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:19.656Z,1528889299.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:19.674Z,1528889299.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:20.057Z,1528889300.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:20.075Z,1528889300.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:20.460Z,1528889300.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:20.484Z,1528889300.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:20.856Z,1528889300.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:20.880Z,1528889300.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:21.256Z,1528889301.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:21.274Z,1528889301.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:21.654Z,1528889301.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:21.684Z,1528889301.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:22.056Z,1528889302.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:22.077Z,1528889302.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:22.456Z,1528889302.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:22.474Z,1528889302.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:22.860Z,1528889302.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:22.884Z,1528889302.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:23.260Z,1528889303.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:23.278Z,1528889303.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:23.656Z,1528889303.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:23.674Z,1528889303.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:24.060Z,1528889304.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:24.084Z,1528889304.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:24.456Z,1528889304.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:24.480Z,1528889304.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:24.857Z,1528889304.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:24.875Z,1528889304.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:25.254Z,1528889305.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:25.278Z,1528889305.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:25.657Z,1528889305.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:25.676Z,1528889305.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:26.056Z,1528889306.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:26.074Z,1528889306.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:26.460Z,1528889306.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:26.478Z,1528889306.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:26.857Z,1528889306.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:26.875Z,1528889306.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:27.260Z,1528889307.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:27.279Z,1528889307.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:27.658Z,1528889307.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:27.684Z,1528889307.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:28.050Z,1528889308.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:28.078Z,1528889308.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:28.460Z,1528889308.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:28.478Z,1528889308.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:28.858Z,1528889308.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:28.881Z,1528889308.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:29.250Z,1528889309.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:29.278Z,1528889309.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:29.660Z,1528889309.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:29.684Z,1528889309.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:30.058Z,1528889310.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:30.082Z,1528889310.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:30.460Z,1528889310.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:30.478Z,1528889310.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:30.838Z,1528889310.838 [NAL9602](INFO): Powering up NAL9602
2018-06-13T11:28:30.865Z,1528889310.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:30.888Z,1528889310.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:31.258Z,1528889311.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:31.282Z,1528889311.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:31.650Z,1528889311.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:31.687Z,1528889311.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:32.055Z,1528889312.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:32.088Z,1528889312.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:32.456Z,1528889312.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:32.494Z,1528889312.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:32.850Z,1528889312.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:32.888Z,1528889312.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:33.254Z,1528889313.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:33.291Z,1528889313.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:33.654Z,1528889313.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:33.688Z,1528889313.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:34.050Z,1528889314.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:34.072Z,1528889314.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:34.454Z,1528889314.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:34.472Z,1528889314.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:34.850Z,1528889314.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:34.868Z,1528889314.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:35.250Z,1528889315.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:35.272Z,1528889315.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:35.655Z,1528889315.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:35.696Z,1528889315.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:36.058Z,1528889316.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:36.080Z,1528889316.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:36.453Z,1528889316.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:36.471Z,1528889316.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:36.858Z,1528889316.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:36.876Z,1528889316.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:37.258Z,1528889317.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:37.276Z,1528889317.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:37.653Z,1528889317.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:37.676Z,1528889317.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:38.058Z,1528889318.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:38.076Z,1528889318.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:38.458Z,1528889318.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:38.476Z,1528889318.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:38.856Z,1528889318.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:38.873Z,1528889318.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:39.259Z,1528889319.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:39.284Z,1528889319.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:39.658Z,1528889319.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:39.676Z,1528889319.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:40.056Z,1528889320.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:40.074Z,1528889320.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:40.458Z,1528889320.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:40.476Z,1528889320.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:40.858Z,1528889320.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:40.876Z,1528889320.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:41.262Z,1528889321.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:41.280Z,1528889321.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:41.635Z,1528889321.635 [NAL9602](INFO): NAL9602 initialized
2018-06-13T11:28:41.656Z,1528889321.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:41.690Z,1528889321.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:42.061Z,1528889322.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:42.084Z,1528889322.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:42.465Z,1528889322.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:42.484Z,1528889322.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:42.869Z,1528889322.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:42.888Z,1528889322.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:43.270Z,1528889323.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:43.308Z,1528889323.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:43.659Z,1528889323.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:43.677Z,1528889323.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:44.060Z,1528889324.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:44.085Z,1528889324.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:44.461Z,1528889324.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:44.480Z,1528889324.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:44.870Z,1528889324.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:44.888Z,1528889324.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:45.269Z,1528889325.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:45.309Z,1528889325.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:45.669Z,1528889325.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:45.688Z,1528889325.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:46.056Z,1528889326.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:46.087Z,1528889326.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:46.461Z,1528889326.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:46.479Z,1528889326.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:46.859Z,1528889326.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:46.884Z,1528889326.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:47.255Z,1528889327.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:47.280Z,1528889327.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:47.668Z,1528889327.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:47.692Z,1528889327.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:48.074Z,1528889328.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:48.092Z,1528889328.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:48.468Z,1528889328.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:48.492Z,1528889328.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:48.859Z,1528889328.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:48.876Z,1528889328.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:49.263Z,1528889329.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:49.281Z,1528889329.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:49.655Z,1528889329.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:49.681Z,1528889329.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:50.058Z,1528889330.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:50.080Z,1528889330.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:50.459Z,1528889330.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:50.484Z,1528889330.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:50.871Z,1528889330.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:50.889Z,1528889330.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:51.271Z,1528889331.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:51.289Z,1528889331.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:51.671Z,1528889331.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:51.689Z,1528889331.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:52.059Z,1528889332.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:52.084Z,1528889332.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:52.456Z,1528889332.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:52.474Z,1528889332.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:52.854Z,1528889332.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:52.897Z,1528889332.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:53.259Z,1528889333.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:53.283Z,1528889333.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:53.667Z,1528889333.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:53.685Z,1528889333.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:54.075Z,1528889334.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:54.094Z,1528889334.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:54.474Z,1528889334.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:54.492Z,1528889334.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:54.851Z,1528889334.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:54.878Z,1528889334.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:55.255Z,1528889335.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:55.293Z,1528889335.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:55.655Z,1528889335.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:55.684Z,1528889335.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:56.051Z,1528889336.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:56.088Z,1528889336.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:56.455Z,1528889336.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:56.483Z,1528889336.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:56.871Z,1528889336.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:56.891Z,1528889336.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:57.271Z,1528889337.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:57.289Z,1528889337.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:57.670Z,1528889337.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:57.702Z,1528889337.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:58.055Z,1528889338.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:58.083Z,1528889338.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:58.455Z,1528889338.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:58.482Z,1528889338.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:58.856Z,1528889338.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:58.883Z,1528889338.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:59.255Z,1528889339.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:59.283Z,1528889339.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:28:59.668Z,1528889339.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:28:59.687Z,1528889339.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:00.076Z,1528889340.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:00.094Z,1528889340.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:00.472Z,1528889340.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:00.490Z,1528889340.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:00.851Z,1528889340.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:00.887Z,1528889340.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:01.255Z,1528889341.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:01.293Z,1528889341.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:01.651Z,1528889341.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:01.693Z,1528889341.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:02.051Z,1528889342.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:02.077Z,1528889342.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:02.455Z,1528889342.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:02.485Z,1528889342.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:02.865Z,1528889342.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:02.903Z,1528889342.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:03.269Z,1528889343.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:03.303Z,1528889343.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:03.669Z,1528889343.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:03.707Z,1528889343.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:04.058Z,1528889344.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:04.076Z,1528889344.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:04.456Z,1528889344.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:04.474Z,1528889344.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:04.858Z,1528889344.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:04.876Z,1528889344.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:05.258Z,1528889345.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:05.276Z,1528889345.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:05.661Z,1528889345.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:05.679Z,1528889345.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:06.069Z,1528889346.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:06.087Z,1528889346.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:06.466Z,1528889346.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:06.484Z,1528889346.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:06.857Z,1528889346.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:06.875Z,1528889346.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:07.262Z,1528889347.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:07.279Z,1528889347.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:07.660Z,1528889347.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:07.684Z,1528889347.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:08.057Z,1528889348.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:08.075Z,1528889348.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:08.461Z,1528889348.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:08.479Z,1528889348.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:08.865Z,1528889348.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:08.884Z,1528889348.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:09.265Z,1528889349.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:09.283Z,1528889349.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:09.669Z,1528889349.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:09.687Z,1528889349.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:10.060Z,1528889350.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:10.078Z,1528889350.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:10.456Z,1528889350.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:10.475Z,1528889350.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:10.860Z,1528889350.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:10.888Z,1528889350.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:11.256Z,1528889351.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:11.288Z,1528889351.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:11.666Z,1528889351.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:11.684Z,1528889351.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:12.069Z,1528889352.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:12.087Z,1528889352.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:12.466Z,1528889352.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:12.488Z,1528889352.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:12.860Z,1528889352.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:12.879Z,1528889352.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:13.259Z,1528889353.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:13.292Z,1528889353.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:13.655Z,1528889353.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:13.679Z,1528889353.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:14.058Z,1528889354.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:14.076Z,1528889354.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:14.462Z,1528889354.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:14.479Z,1528889354.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:14.870Z,1528889354.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:14.888Z,1528889354.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:15.269Z,1528889355.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:15.287Z,1528889355.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:15.669Z,1528889355.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:15.692Z,1528889355.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:16.062Z,1528889356.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:16.080Z,1528889356.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:19.168Z,1528889359.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:19.178Z,1528889359.178 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T11:29:19.178Z,1528889359.178 [BPC1] Communications Fault, FailCount= 5
2018-06-13T11:29:19.178Z,1528889359.178 [BPC1](ERROR): Communications Fault
2018-06-13T11:29:19.188Z,1528889359.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:19.289Z,1528889359.289 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T11:29:19.328Z,1528889359.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:19.371Z,1528889359.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:19.733Z,1528889359.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:19.767Z,1528889359.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:20.137Z,1528889360.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:20.164Z,1528889360.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:20.250Z,1528889360.250 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T11:29:20.250Z,1528889360.250 [BPC1] No Fault, FailCount= 5
2018-06-13T11:29:20.533Z,1528889360.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:20.616Z,1528889360.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:20.919Z,1528889360.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:20.944Z,1528889360.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:21.322Z,1528889361.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:21.340Z,1528889361.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:21.722Z,1528889361.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:21.740Z,1528889361.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:22.123Z,1528889362.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:22.142Z,1528889362.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:22.522Z,1528889362.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:22.539Z,1528889362.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:22.933Z,1528889362.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:22.967Z,1528889362.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:23.333Z,1528889363.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:23.351Z,1528889363.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:23.733Z,1528889363.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:23.751Z,1528889363.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:24.127Z,1528889364.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:24.145Z,1528889364.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:24.526Z,1528889364.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:24.544Z,1528889364.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:24.927Z,1528889364.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:24.944Z,1528889364.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:25.328Z,1528889365.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:25.346Z,1528889365.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:25.733Z,1528889365.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:25.751Z,1528889365.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:26.134Z,1528889366.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:26.152Z,1528889366.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:26.534Z,1528889366.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:26.551Z,1528889366.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:26.929Z,1528889366.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:26.947Z,1528889366.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:27.327Z,1528889367.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:27.344Z,1528889367.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:27.729Z,1528889367.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:27.746Z,1528889367.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:28.122Z,1528889368.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:28.156Z,1528889368.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:28.526Z,1528889368.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:28.544Z,1528889368.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:28.937Z,1528889368.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:28.955Z,1528889368.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:29.338Z,1528889369.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:29.360Z,1528889369.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:29.739Z,1528889369.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:29.764Z,1528889369.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:30.123Z,1528889370.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:30.147Z,1528889370.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:30.523Z,1528889370.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:30.550Z,1528889370.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:30.919Z,1528889370.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:30.949Z,1528889370.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:31.323Z,1528889371.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:31.356Z,1528889371.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:31.740Z,1528889371.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:31.764Z,1528889371.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:32.140Z,1528889372.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:32.159Z,1528889372.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:32.539Z,1528889372.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:32.558Z,1528889372.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:32.923Z,1528889372.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:32.965Z,1528889372.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:33.319Z,1528889373.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:33.353Z,1528889373.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:33.720Z,1528889373.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:33.759Z,1528889373.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:34.123Z,1528889374.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:34.160Z,1528889374.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:34.519Z,1528889374.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:34.554Z,1528889374.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:34.945Z,1528889374.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:34.963Z,1528889374.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:35.333Z,1528889375.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:35.368Z,1528889375.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:35.734Z,1528889375.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:35.763Z,1528889375.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:36.120Z,1528889376.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:36.145Z,1528889376.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:36.523Z,1528889376.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:36.557Z,1528889376.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:36.919Z,1528889376.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:36.937Z,1528889376.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:37.323Z,1528889377.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:37.341Z,1528889377.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:37.735Z,1528889377.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:37.767Z,1528889377.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:38.133Z,1528889378.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:38.167Z,1528889378.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:38.533Z,1528889378.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:38.566Z,1528889378.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:38.919Z,1528889378.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:38.944Z,1528889378.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:39.322Z,1528889379.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:39.339Z,1528889379.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:39.723Z,1528889379.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:39.748Z,1528889379.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:40.122Z,1528889380.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:40.140Z,1528889380.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:40.526Z,1528889380.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:40.543Z,1528889380.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:40.937Z,1528889380.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:40.955Z,1528889380.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:41.337Z,1528889381.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:41.355Z,1528889381.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:41.733Z,1528889381.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:41.751Z,1528889381.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:42.128Z,1528889382.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:42.145Z,1528889382.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:42.529Z,1528889382.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:42.547Z,1528889382.547 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:42.547Z,1528889382.547 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 161
2018-06-13T11:29:42.547Z,1528889382.547 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:29:42.549Z,1528889382.549 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:42.549Z,1528889382.549 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 161
2018-06-13T11:29:42.549Z,1528889382.549 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:29:42.551Z,1528889382.551 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:42.551Z,1528889382.551 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 161
2018-06-13T11:29:42.551Z,1528889382.551 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:29:42.633Z,1528889382.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:29:42.633Z,1528889382.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:29:42.634Z,1528889382.634 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:29:42.926Z,1528889382.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:43.021Z,1528889383.021 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:29:43.021Z,1528889383.021 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 161
2018-06-13T11:29:43.021Z,1528889383.021 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:29:43.022Z,1528889383.022 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 161
2018-06-13T11:29:43.022Z,1528889383.022 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:29:43.022Z,1528889383.022 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 161
2018-06-13T11:29:43.323Z,1528889383.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:43.346Z,1528889383.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:29:43.346Z,1528889383.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:29:43.346Z,1528889383.346 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:29:43.347Z,1528889383.347 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:29:43.347Z,1528889383.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:29:43.347Z,1528889383.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:29:43.348Z,1528889383.348 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:29:43.348Z,1528889383.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:29:43.348Z,1528889383.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:29:43.739Z,1528889383.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:43.757Z,1528889383.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:29:43.758Z,1528889383.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:44.129Z,1528889384.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:44.163Z,1528889384.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:29:44.164Z,1528889384.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:44.540Z,1528889384.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:44.558Z,1528889384.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:29:44.558Z,1528889384.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:44.919Z,1528889384.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:44.956Z,1528889384.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:29:44.961Z,1528889384.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:45.320Z,1528889385.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:45.353Z,1528889385.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:29:45.354Z,1528889385.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:45.719Z,1528889385.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:45.736Z,1528889385.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:29:45.738Z,1528889385.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:46.123Z,1528889386.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:46.164Z,1528889386.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:29:46.169Z,1528889386.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:46.522Z,1528889386.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:46.539Z,1528889386.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:29:46.540Z,1528889386.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:46.933Z,1528889386.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:46.967Z,1528889386.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:29:46.968Z,1528889386.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:47.334Z,1528889387.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:47.352Z,1528889387.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:29:47.369Z,1528889387.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:47.729Z,1528889387.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:47.747Z,1528889387.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:29:47.747Z,1528889387.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:48.124Z,1528889388.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:48.142Z,1528889388.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:29:48.143Z,1528889388.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:48.524Z,1528889388.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:48.542Z,1528889388.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:29:48.543Z,1528889388.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:48.922Z,1528889388.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:48.939Z,1528889388.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:29:48.940Z,1528889388.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:49.324Z,1528889389.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:49.351Z,1528889389.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:29:49.352Z,1528889389.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:49.729Z,1528889389.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:49.747Z,1528889389.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:29:49.748Z,1528889389.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:50.133Z,1528889390.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:50.150Z,1528889390.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:29:50.151Z,1528889390.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:50.539Z,1528889390.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:50.556Z,1528889390.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:29:50.558Z,1528889390.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:50.919Z,1528889390.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:50.953Z,1528889390.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:29:50.954Z,1528889390.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:51.319Z,1528889391.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:51.346Z,1528889391.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:29:51.347Z,1528889391.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:51.719Z,1528889391.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:51.755Z,1528889391.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:29:51.756Z,1528889391.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:52.120Z,1528889392.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:52.154Z,1528889392.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:29:52.155Z,1528889392.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:52.515Z,1528889392.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:52.545Z,1528889392.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:29:52.546Z,1528889392.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:52.929Z,1528889392.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:52.964Z,1528889392.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:29:52.965Z,1528889392.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:53.340Z,1528889393.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:53.357Z,1528889393.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:29:53.358Z,1528889393.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:53.740Z,1528889393.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:53.758Z,1528889393.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:29:53.759Z,1528889393.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:54.119Z,1528889394.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:54.145Z,1528889394.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:29:54.146Z,1528889394.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:54.519Z,1528889394.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:54.536Z,1528889394.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:29:54.554Z,1528889394.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:54.920Z,1528889394.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:54.937Z,1528889394.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:29:54.938Z,1528889394.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:55.323Z,1528889395.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:55.340Z,1528889395.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:29:55.341Z,1528889395.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:55.733Z,1528889395.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:55.767Z,1528889395.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:29:55.768Z,1528889395.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:56.133Z,1528889396.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:56.151Z,1528889396.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:29:56.152Z,1528889396.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:56.530Z,1528889396.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:56.547Z,1528889396.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:29:56.548Z,1528889396.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:56.924Z,1528889396.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:56.952Z,1528889396.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:29:56.953Z,1528889396.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:57.322Z,1528889397.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:57.339Z,1528889397.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:29:57.340Z,1528889397.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:57.724Z,1528889397.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:57.742Z,1528889397.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:29:57.743Z,1528889397.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:58.124Z,1528889398.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:58.142Z,1528889398.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:29:58.143Z,1528889398.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:58.522Z,1528889398.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:58.539Z,1528889398.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:29:58.540Z,1528889398.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:58.930Z,1528889398.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:58.948Z,1528889398.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:29:58.949Z,1528889398.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:59.333Z,1528889399.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:59.351Z,1528889399.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:29:59.352Z,1528889399.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:29:59.731Z,1528889399.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:29:59.748Z,1528889399.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:29:59.749Z,1528889399.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:00.123Z,1528889400.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:00.145Z,1528889400.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:30:00.146Z,1528889400.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:00.523Z,1528889400.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:00.554Z,1528889400.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:30:00.555Z,1528889400.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:00.921Z,1528889400.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:00.939Z,1528889400.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:30:00.940Z,1528889400.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:01.325Z,1528889401.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:01.342Z,1528889401.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:30:01.343Z,1528889401.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:01.737Z,1528889401.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:01.755Z,1528889401.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:30:01.756Z,1528889401.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:02.133Z,1528889402.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:02.150Z,1528889402.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:30:02.151Z,1528889402.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:02.530Z,1528889402.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:02.548Z,1528889402.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:02.923Z,1528889402.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:02.954Z,1528889402.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:03.322Z,1528889403.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:03.339Z,1528889403.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:03.726Z,1528889403.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:03.744Z,1528889403.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:04.126Z,1528889404.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:04.144Z,1528889404.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:04.522Z,1528889404.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:04.540Z,1528889404.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:04.930Z,1528889404.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:04.952Z,1528889404.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:05.333Z,1528889405.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:05.351Z,1528889405.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:05.731Z,1528889405.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:05.756Z,1528889405.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:06.123Z,1528889406.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:06.154Z,1528889406.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:06.529Z,1528889406.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:06.547Z,1528889406.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:06.923Z,1528889406.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:06.941Z,1528889406.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:07.323Z,1528889407.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:07.358Z,1528889407.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:07.731Z,1528889407.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:07.749Z,1528889407.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:08.132Z,1528889408.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:08.150Z,1528889408.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:08.532Z,1528889408.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:08.550Z,1528889408.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:08.923Z,1528889408.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:08.956Z,1528889408.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:09.322Z,1528889409.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:09.341Z,1528889409.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:09.723Z,1528889409.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:09.756Z,1528889409.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:10.126Z,1528889410.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:10.144Z,1528889410.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:10.522Z,1528889410.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:10.541Z,1528889410.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:10.931Z,1528889410.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:10.950Z,1528889410.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:11.333Z,1528889411.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:11.352Z,1528889411.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:11.731Z,1528889411.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:11.749Z,1528889411.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:12.123Z,1528889412.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:12.155Z,1528889412.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:12.528Z,1528889412.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:12.546Z,1528889412.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:12.923Z,1528889412.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:12.941Z,1528889412.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:13.327Z,1528889413.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:13.345Z,1528889413.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:13.735Z,1528889413.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:13.753Z,1528889413.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:14.136Z,1528889414.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:14.154Z,1528889414.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:14.539Z,1528889414.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:14.557Z,1528889414.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:14.929Z,1528889414.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:14.947Z,1528889414.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:18.038Z,1528889418.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:18.056Z,1528889418.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:18.172Z,1528889418.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:18.219Z,1528889418.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:18.588Z,1528889418.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:18.608Z,1528889418.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:18.988Z,1528889418.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:19.007Z,1528889419.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:19.386Z,1528889419.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:19.404Z,1528889419.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:19.767Z,1528889419.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:19.801Z,1528889419.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:20.163Z,1528889420.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:20.207Z,1528889420.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:20.567Z,1528889420.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:20.601Z,1528889420.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:20.983Z,1528889420.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:21.003Z,1528889421.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:21.385Z,1528889421.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:21.447Z,1528889421.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:21.783Z,1528889421.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:21.802Z,1528889421.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:22.163Z,1528889422.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:22.200Z,1528889422.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:22.563Z,1528889422.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:22.600Z,1528889422.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:22.967Z,1528889422.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:22.995Z,1528889422.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:23.363Z,1528889423.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:23.400Z,1528889423.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:23.784Z,1528889423.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:23.803Z,1528889423.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:24.187Z,1528889424.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:24.206Z,1528889424.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:24.583Z,1528889424.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:24.604Z,1528889424.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:24.963Z,1528889424.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:25.006Z,1528889425.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:25.367Z,1528889425.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:25.396Z,1528889425.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:25.766Z,1528889425.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:25.801Z,1528889425.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:26.163Z,1528889426.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:26.203Z,1528889426.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:26.567Z,1528889426.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:26.604Z,1528889426.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:26.976Z,1528889426.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:27.003Z,1528889427.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:27.384Z,1528889427.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:27.410Z,1528889427.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:27.774Z,1528889427.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:27.820Z,1528889427.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:28.167Z,1528889428.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:28.210Z,1528889428.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:28.563Z,1528889428.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:28.581Z,1528889428.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:28.968Z,1528889428.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:28.985Z,1528889428.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:29.370Z,1528889429.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:29.388Z,1528889429.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:29.781Z,1528889429.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:29.816Z,1528889429.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:30.181Z,1528889430.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:30.222Z,1528889430.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:30.581Z,1528889430.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:30.618Z,1528889430.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:30.970Z,1528889430.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:30.988Z,1528889430.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:31.370Z,1528889431.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:31.388Z,1528889431.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:31.770Z,1528889431.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:31.788Z,1528889431.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:32.166Z,1528889432.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:32.184Z,1528889432.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:32.570Z,1528889432.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:32.594Z,1528889432.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:32.978Z,1528889432.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:33.027Z,1528889433.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:33.381Z,1528889433.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:33.400Z,1528889433.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:33.778Z,1528889433.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:33.795Z,1528889433.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:34.169Z,1528889434.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:34.192Z,1528889434.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:34.572Z,1528889434.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:34.590Z,1528889434.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:34.972Z,1528889434.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:34.990Z,1528889434.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:35.368Z,1528889435.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:35.386Z,1528889435.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:35.781Z,1528889435.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:35.800Z,1528889435.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:36.181Z,1528889436.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:36.200Z,1528889436.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:36.577Z,1528889436.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:36.600Z,1528889436.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:36.972Z,1528889436.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:36.991Z,1528889436.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:37.372Z,1528889437.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:37.390Z,1528889437.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:37.772Z,1528889437.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:37.790Z,1528889437.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:38.173Z,1528889438.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:38.191Z,1528889438.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:38.572Z,1528889438.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:38.590Z,1528889438.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:38.977Z,1528889438.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:39.000Z,1528889439.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:39.381Z,1528889439.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:39.425Z,1528889439.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:39.778Z,1528889439.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:39.796Z,1528889439.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:40.171Z,1528889440.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:40.195Z,1528889440.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:40.574Z,1528889440.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:40.629Z,1528889440.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:40.973Z,1528889440.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:40.991Z,1528889440.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:41.373Z,1528889441.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:41.396Z,1528889441.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:41.782Z,1528889441.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:41.800Z,1528889441.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:42.181Z,1528889442.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:42.200Z,1528889442.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:42.578Z,1528889442.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:42.600Z,1528889442.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:42.974Z,1528889442.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:42.992Z,1528889442.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:43.373Z,1528889443.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:43.391Z,1528889443.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:43.773Z,1528889443.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:43.791Z,1528889443.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:44.174Z,1528889444.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:44.198Z,1528889444.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:44.566Z,1528889444.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:44.611Z,1528889444.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:44.982Z,1528889444.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:45.004Z,1528889445.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:45.383Z,1528889445.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:45.404Z,1528889445.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:45.782Z,1528889445.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:45.800Z,1528889445.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:46.173Z,1528889446.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:46.191Z,1528889446.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:46.574Z,1528889446.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:46.592Z,1528889446.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:46.971Z,1528889446.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:46.994Z,1528889446.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:47.371Z,1528889447.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:47.402Z,1528889447.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:47.788Z,1528889447.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:47.806Z,1528889447.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:48.187Z,1528889448.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:48.206Z,1528889448.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:48.580Z,1528889448.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:48.598Z,1528889448.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:48.967Z,1528889448.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:48.996Z,1528889448.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:49.367Z,1528889449.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:49.401Z,1528889449.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:49.777Z,1528889449.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:49.795Z,1528889449.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:50.168Z,1528889450.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:50.198Z,1528889450.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:50.567Z,1528889450.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:50.602Z,1528889450.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:50.984Z,1528889450.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:51.003Z,1528889451.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:51.383Z,1528889451.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:51.403Z,1528889451.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:51.786Z,1528889451.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:51.812Z,1528889451.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:52.167Z,1528889452.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:52.213Z,1528889452.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:52.567Z,1528889452.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:52.607Z,1528889452.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:52.968Z,1528889452.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:53.002Z,1528889453.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:53.367Z,1528889453.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:53.412Z,1528889453.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:53.786Z,1528889453.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:53.836Z,1528889453.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:54.186Z,1528889454.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:54.220Z,1528889454.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:54.582Z,1528889454.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:54.619Z,1528889454.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:54.971Z,1528889454.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:54.989Z,1528889454.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:55.371Z,1528889455.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:55.389Z,1528889455.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:55.772Z,1528889455.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:55.796Z,1528889455.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:56.172Z,1528889456.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:56.225Z,1528889456.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:56.570Z,1528889456.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:56.588Z,1528889456.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:56.982Z,1528889456.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:57.000Z,1528889457.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:57.381Z,1528889457.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:57.400Z,1528889457.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:57.778Z,1528889457.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:57.796Z,1528889457.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:58.172Z,1528889458.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:58.190Z,1528889458.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:58.569Z,1528889458.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:58.588Z,1528889458.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:58.974Z,1528889458.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:58.993Z,1528889458.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:59.371Z,1528889459.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:59.407Z,1528889459.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:30:59.783Z,1528889459.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:30:59.802Z,1528889459.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:00.182Z,1528889460.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:00.205Z,1528889460.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:00.582Z,1528889460.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:00.602Z,1528889460.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:00.963Z,1528889460.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:01.002Z,1528889461.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:01.367Z,1528889461.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:01.404Z,1528889461.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:01.777Z,1528889461.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:01.801Z,1528889461.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:02.168Z,1528889462.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:02.200Z,1528889462.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:02.567Z,1528889462.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:02.603Z,1528889462.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:02.983Z,1528889462.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:03.002Z,1528889463.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:03.388Z,1528889463.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:03.406Z,1528889463.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:03.782Z,1528889463.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:03.814Z,1528889463.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:04.167Z,1528889464.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:04.205Z,1528889464.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:04.563Z,1528889464.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:04.591Z,1528889464.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:04.967Z,1528889464.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:05.001Z,1528889465.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:05.367Z,1528889465.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:05.404Z,1528889465.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:05.788Z,1528889465.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:05.807Z,1528889465.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:06.187Z,1528889466.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:06.212Z,1528889466.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:06.588Z,1528889466.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:06.643Z,1528889466.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:06.963Z,1528889466.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:06.992Z,1528889466.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:07.367Z,1528889467.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:07.427Z,1528889467.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:07.767Z,1528889467.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:07.819Z,1528889467.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:08.167Z,1528889468.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:08.202Z,1528889468.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:08.568Z,1528889468.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:08.585Z,1528889468.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:08.977Z,1528889468.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:09.015Z,1528889469.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:09.381Z,1528889469.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:09.419Z,1528889469.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:09.781Z,1528889469.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:09.800Z,1528889469.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:10.172Z,1528889470.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:10.190Z,1528889470.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:10.570Z,1528889470.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:10.588Z,1528889470.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:10.972Z,1528889470.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:10.990Z,1528889470.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:11.372Z,1528889471.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:11.391Z,1528889471.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:11.777Z,1528889471.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:11.795Z,1528889471.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:12.181Z,1528889472.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:12.199Z,1528889472.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:12.578Z,1528889472.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:12.598Z,1528889472.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:12.970Z,1528889472.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:12.987Z,1528889472.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:13.374Z,1528889473.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:13.391Z,1528889473.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:13.773Z,1528889473.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:13.791Z,1528889473.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:14.174Z,1528889474.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:14.192Z,1528889474.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:14.575Z,1528889474.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:14.592Z,1528889474.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:14.982Z,1528889474.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:15.000Z,1528889475.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:15.382Z,1528889475.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:15.400Z,1528889475.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:15.782Z,1528889475.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:15.800Z,1528889475.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:16.176Z,1528889476.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:16.195Z,1528889476.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:19.304Z,1528889479.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:19.344Z,1528889479.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:19.454Z,1528889479.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:19.526Z,1528889479.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:19.872Z,1528889479.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:19.890Z,1528889479.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:20.276Z,1528889480.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:20.300Z,1528889480.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:20.677Z,1528889480.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:20.695Z,1528889480.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:21.055Z,1528889481.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:21.092Z,1528889481.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:21.455Z,1528889481.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:21.488Z,1528889481.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:21.855Z,1528889481.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:21.887Z,1528889481.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:22.256Z,1528889482.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:22.288Z,1528889482.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:22.655Z,1528889482.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:22.689Z,1528889482.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:23.072Z,1528889483.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:23.089Z,1528889483.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:23.474Z,1528889483.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:23.492Z,1528889483.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:23.876Z,1528889483.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:23.894Z,1528889483.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:24.255Z,1528889484.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:24.292Z,1528889484.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:24.655Z,1528889484.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:24.692Z,1528889484.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:25.055Z,1528889485.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:25.092Z,1528889485.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:25.455Z,1528889485.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:25.491Z,1528889485.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:25.872Z,1528889485.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:25.890Z,1528889485.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:26.276Z,1528889486.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:26.294Z,1528889486.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:26.675Z,1528889486.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:26.693Z,1528889486.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:27.055Z,1528889487.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:27.092Z,1528889487.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:27.455Z,1528889487.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:27.490Z,1528889487.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:27.855Z,1528889487.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:27.892Z,1528889487.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:28.256Z,1528889488.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:28.291Z,1528889488.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:28.655Z,1528889488.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:28.689Z,1528889488.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:29.069Z,1528889489.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:29.104Z,1528889489.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:29.469Z,1528889489.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:29.503Z,1528889489.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:29.869Z,1528889489.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:29.902Z,1528889489.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:30.256Z,1528889490.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:30.296Z,1528889490.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:30.655Z,1528889490.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:30.711Z,1528889490.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:31.055Z,1528889491.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:31.073Z,1528889491.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:31.459Z,1528889491.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:31.476Z,1528889491.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:31.869Z,1528889491.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:31.922Z,1528889491.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:32.274Z,1528889492.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:32.331Z,1528889492.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:32.669Z,1528889492.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:32.687Z,1528889492.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:33.061Z,1528889493.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:33.079Z,1528889493.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:33.461Z,1528889493.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:33.479Z,1528889493.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:33.860Z,1528889493.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:33.878Z,1528889493.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:34.260Z,1528889494.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:34.291Z,1528889494.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:34.657Z,1528889494.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:34.675Z,1528889494.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:35.066Z,1528889495.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:35.084Z,1528889495.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:35.469Z,1528889495.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:35.487Z,1528889495.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:35.867Z,1528889495.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:35.885Z,1528889495.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:36.259Z,1528889496.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:36.289Z,1528889496.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:36.659Z,1528889496.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:36.683Z,1528889496.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:37.060Z,1528889497.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:37.084Z,1528889497.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:37.459Z,1528889497.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:37.483Z,1528889497.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:37.870Z,1528889497.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:37.906Z,1528889497.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:38.271Z,1528889498.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:38.289Z,1528889498.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:38.673Z,1528889498.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:38.691Z,1528889498.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:39.059Z,1528889499.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:39.086Z,1528889499.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:39.463Z,1528889499.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:39.482Z,1528889499.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:39.863Z,1528889499.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:39.894Z,1528889499.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:40.260Z,1528889500.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:40.287Z,1528889500.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:40.663Z,1528889500.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:40.685Z,1528889500.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:41.072Z,1528889501.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:41.090Z,1528889501.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:41.476Z,1528889501.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:41.494Z,1528889501.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:41.878Z,1528889501.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:41.914Z,1528889501.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:42.259Z,1528889502.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:42.300Z,1528889502.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:42.659Z,1528889502.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:42.685Z,1528889502.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:43.064Z,1528889503.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:43.083Z,1528889503.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:43.462Z,1528889503.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:43.485Z,1528889503.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:43.872Z,1528889503.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:43.891Z,1528889503.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:44.275Z,1528889504.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:44.294Z,1528889504.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:44.675Z,1528889504.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:44.700Z,1528889504.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:45.055Z,1528889505.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:45.101Z,1528889505.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:45.451Z,1528889505.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:45.482Z,1528889505.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:45.855Z,1528889505.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:45.885Z,1528889505.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:46.256Z,1528889506.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:46.289Z,1528889506.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:46.656Z,1528889506.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:46.690Z,1528889506.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:47.075Z,1528889507.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:47.094Z,1528889507.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:47.474Z,1528889507.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:47.492Z,1528889507.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:47.872Z,1528889507.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:47.891Z,1528889507.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:48.259Z,1528889508.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:48.292Z,1528889508.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:48.655Z,1528889508.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:48.692Z,1528889508.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:49.056Z,1528889509.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:49.088Z,1528889509.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:49.455Z,1528889509.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:49.491Z,1528889509.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:49.872Z,1528889509.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:49.890Z,1528889509.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:50.276Z,1528889510.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:50.294Z,1528889510.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:50.675Z,1528889510.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:50.694Z,1528889510.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:51.055Z,1528889511.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:51.092Z,1528889511.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:51.456Z,1528889511.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:51.494Z,1528889511.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:51.855Z,1528889511.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:51.889Z,1528889511.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:52.256Z,1528889512.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:52.286Z,1528889512.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:52.655Z,1528889512.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:52.696Z,1528889512.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:53.069Z,1528889513.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:53.122Z,1528889513.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:53.470Z,1528889513.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:53.515Z,1528889513.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:53.865Z,1528889513.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:53.883Z,1528889513.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:54.259Z,1528889514.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:54.284Z,1528889514.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:54.658Z,1528889514.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:54.676Z,1528889514.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:55.054Z,1528889515.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:55.080Z,1528889515.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:55.460Z,1528889515.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:55.479Z,1528889515.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:55.866Z,1528889515.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:55.884Z,1528889515.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:56.269Z,1528889516.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:56.287Z,1528889516.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:56.669Z,1528889516.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:56.687Z,1528889516.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:57.060Z,1528889517.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:57.079Z,1528889517.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:57.458Z,1528889517.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:57.475Z,1528889517.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:57.861Z,1528889517.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:57.879Z,1528889517.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:58.261Z,1528889518.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:58.284Z,1528889518.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:58.661Z,1528889518.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:58.679Z,1528889518.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:59.066Z,1528889519.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:59.084Z,1528889519.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:59.469Z,1528889519.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:59.487Z,1528889519.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:31:59.865Z,1528889519.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:31:59.883Z,1528889519.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:00.260Z,1528889520.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:00.279Z,1528889520.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:00.660Z,1528889520.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:00.678Z,1528889520.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:01.059Z,1528889521.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:01.077Z,1528889521.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:01.460Z,1528889521.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:01.478Z,1528889521.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:01.866Z,1528889521.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:01.884Z,1528889521.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:02.264Z,1528889522.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:02.282Z,1528889522.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:02.666Z,1528889522.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:02.688Z,1528889522.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:03.059Z,1528889523.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:03.090Z,1528889523.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:03.462Z,1528889523.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:03.480Z,1528889523.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:03.859Z,1528889523.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:03.882Z,1528889523.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:04.259Z,1528889524.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:04.284Z,1528889524.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:04.662Z,1528889524.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:04.686Z,1528889524.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:05.068Z,1528889525.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:05.120Z,1528889525.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:05.474Z,1528889525.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:05.492Z,1528889525.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:05.872Z,1528889525.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:05.890Z,1528889525.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:06.260Z,1528889526.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:06.279Z,1528889526.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:06.661Z,1528889526.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:06.679Z,1528889526.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:07.062Z,1528889527.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:07.080Z,1528889527.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:07.459Z,1528889527.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:07.482Z,1528889527.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:07.875Z,1528889527.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:07.893Z,1528889527.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:08.274Z,1528889528.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:08.292Z,1528889528.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:08.671Z,1528889528.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:08.689Z,1528889528.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:09.059Z,1528889529.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:09.084Z,1528889529.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:09.461Z,1528889529.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:09.479Z,1528889529.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:09.862Z,1528889529.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:09.884Z,1528889529.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:10.259Z,1528889530.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:10.289Z,1528889530.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:10.651Z,1528889530.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:10.685Z,1528889530.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:11.071Z,1528889531.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:11.093Z,1528889531.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:11.475Z,1528889531.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:11.493Z,1528889531.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:11.872Z,1528889531.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:11.890Z,1528889531.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:12.255Z,1528889532.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:12.282Z,1528889532.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:12.659Z,1528889532.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:12.695Z,1528889532.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:13.051Z,1528889533.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:13.090Z,1528889533.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:13.455Z,1528889533.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:13.491Z,1528889533.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:13.871Z,1528889533.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:13.890Z,1528889533.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:14.265Z,1528889534.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:14.295Z,1528889534.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:14.676Z,1528889534.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:14.694Z,1528889534.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:15.059Z,1528889535.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:15.087Z,1528889535.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:18.171Z,1528889538.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:18.196Z,1528889538.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:18.200Z,1528889538.200 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T11:27:17.9Z
2018-06-13T11:32:18.200Z,1528889538.200 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T11:32:18.200Z,1528889538.200 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T11:32:18.298Z,1528889538.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:18.346Z,1528889538.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:19.461Z,1528889539.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:19.484Z,1528889539.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:19.634Z,1528889539.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:19.680Z,1528889539.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:20.037Z,1528889540.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:20.072Z,1528889540.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:20.422Z,1528889540.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:20.440Z,1528889540.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:20.827Z,1528889540.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:20.861Z,1528889540.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:21.228Z,1528889541.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:21.246Z,1528889541.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:21.628Z,1528889541.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:21.646Z,1528889541.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:24.767Z,1528889544.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:24.792Z,1528889544.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:24.873Z,1528889544.873 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0188.lzma
2018-06-13T11:32:24.910Z,1528889544.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:24.961Z,1528889544.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:25.313Z,1528889545.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:25.346Z,1528889545.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:25.675Z,1528889545.675 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0188.lzma.bak
2018-06-13T11:32:25.675Z,1528889545.675 [DataOverHttps](INFO): SBD MOMSN=8329144
2018-06-13T11:32:25.698Z,1528889545.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:25.716Z,1528889545.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:27.618Z,1528889547.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:27.645Z,1528889547.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:27.761Z,1528889547.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:27.807Z,1528889547.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:28.184Z,1528889548.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:28.203Z,1528889548.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:31.298Z,1528889551.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:31.316Z,1528889551.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:31.434Z,1528889551.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:31.468Z,1528889551.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:31.823Z,1528889551.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:31.860Z,1528889551.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:32.243Z,1528889552.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:32.262Z,1528889552.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:32.623Z,1528889552.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:32.660Z,1528889552.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:33.040Z,1528889553.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:33.059Z,1528889553.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:33.445Z,1528889553.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:33.463Z,1528889553.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:33.830Z,1528889553.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:33.866Z,1528889553.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:34.219Z,1528889554.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:34.254Z,1528889554.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:37.353Z,1528889557.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:37.377Z,1528889557.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:37.485Z,1528889557.485 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0189.lzma
2018-06-13T11:32:37.518Z,1528889557.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:37.568Z,1528889557.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:37.925Z,1528889557.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:37.958Z,1528889557.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:38.286Z,1528889558.286 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0189.lzma.bak
2018-06-13T11:32:38.286Z,1528889558.286 [DataOverHttps](INFO): SBD MOMSN=8329146
2018-06-13T11:32:38.342Z,1528889558.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:38.366Z,1528889558.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:40.210Z,1528889560.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:40.229Z,1528889560.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:40.232Z,1528889560.232 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T11:32:40.232Z,1528889560.232 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T11:32:40.232Z,1528889560.232 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T11:32:40.367Z,1528889560.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:40.411Z,1528889560.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:40.762Z,1528889560.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:40.780Z,1528889560.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:41.163Z,1528889561.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:41.188Z,1528889561.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:41.562Z,1528889561.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:41.580Z,1528889561.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:41.977Z,1528889561.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:42.016Z,1528889562.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:42.373Z,1528889562.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:42.410Z,1528889562.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:42.773Z,1528889562.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:42.807Z,1528889562.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:43.166Z,1528889563.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:43.192Z,1528889563.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:43.566Z,1528889563.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:43.584Z,1528889563.584 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:43.584Z,1528889563.584 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 162
2018-06-13T11:32:43.584Z,1528889563.584 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:32:43.586Z,1528889563.586 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:43.586Z,1528889563.586 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 162
2018-06-13T11:32:43.586Z,1528889563.586 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:32:43.588Z,1528889563.588 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:43.588Z,1528889563.588 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 162
2018-06-13T11:32:43.588Z,1528889563.588 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:32:43.677Z,1528889563.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:32:43.677Z,1528889563.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:32:43.678Z,1528889563.678 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:32:43.962Z,1528889563.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:44.073Z,1528889564.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:32:44.073Z,1528889564.073 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 162
2018-06-13T11:32:44.074Z,1528889564.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:32:44.074Z,1528889564.074 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 162
2018-06-13T11:32:44.074Z,1528889564.074 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:32:44.074Z,1528889564.074 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 162
2018-06-13T11:32:44.362Z,1528889564.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:44.395Z,1528889564.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:32:44.396Z,1528889564.396 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:32:44.396Z,1528889564.396 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:32:44.397Z,1528889564.397 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:32:44.397Z,1528889564.397 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:32:44.397Z,1528889564.397 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:32:44.398Z,1528889564.398 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:32:44.398Z,1528889564.398 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:32:44.399Z,1528889564.399 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:32:47.497Z,1528889567.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:47.535Z,1528889567.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:32:47.536Z,1528889567.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:47.677Z,1528889567.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:47.712Z,1528889567.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T11:32:47.713Z,1528889567.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:48.076Z,1528889568.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:48.094Z,1528889568.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T11:32:48.095Z,1528889568.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:48.470Z,1528889568.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:48.495Z,1528889568.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T11:32:48.496Z,1528889568.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:48.855Z,1528889568.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:48.872Z,1528889568.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T11:32:48.873Z,1528889568.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:49.252Z,1528889569.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:49.276Z,1528889569.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T11:32:49.297Z,1528889569.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:49.654Z,1528889569.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:49.671Z,1528889569.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T11:32:49.672Z,1528889569.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:50.065Z,1528889570.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:50.110Z,1528889570.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T11:32:50.111Z,1528889570.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:50.469Z,1528889570.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:50.518Z,1528889570.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T11:32:50.518Z,1528889570.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:50.865Z,1528889570.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:50.883Z,1528889570.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T11:32:50.884Z,1528889570.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:51.258Z,1528889571.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:51.276Z,1528889571.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T11:32:51.277Z,1528889571.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:51.651Z,1528889571.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:51.693Z,1528889571.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T11:32:51.694Z,1528889571.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:52.052Z,1528889572.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:52.070Z,1528889572.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T11:32:52.071Z,1528889572.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:52.464Z,1528889572.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:52.553Z,1528889572.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T11:32:52.554Z,1528889572.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:52.846Z,1528889572.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:52.863Z,1528889572.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T11:32:52.864Z,1528889572.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:53.258Z,1528889573.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:53.306Z,1528889573.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T11:32:53.307Z,1528889573.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:53.666Z,1528889573.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:53.692Z,1528889573.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T11:32:53.697Z,1528889573.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:54.061Z,1528889574.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:54.078Z,1528889574.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T11:32:54.079Z,1528889574.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:54.452Z,1528889574.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:54.469Z,1528889574.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T11:32:54.470Z,1528889574.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:54.854Z,1528889574.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:54.871Z,1528889574.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T11:32:54.872Z,1528889574.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:55.254Z,1528889575.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:55.275Z,1528889575.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T11:32:55.276Z,1528889575.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:55.652Z,1528889575.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:55.676Z,1528889575.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T11:32:55.677Z,1528889575.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:56.057Z,1528889576.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:56.080Z,1528889576.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T11:32:56.081Z,1528889576.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:56.465Z,1528889576.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:56.495Z,1528889576.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T11:32:56.496Z,1528889576.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:56.861Z,1528889576.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:56.894Z,1528889576.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T11:32:56.894Z,1528889576.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:57.250Z,1528889577.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:57.268Z,1528889577.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T11:32:57.269Z,1528889577.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:57.650Z,1528889577.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:57.671Z,1528889577.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T11:32:57.672Z,1528889577.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:58.051Z,1528889578.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:58.068Z,1528889578.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T11:32:58.069Z,1528889578.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:58.452Z,1528889578.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:58.486Z,1528889578.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T11:32:58.487Z,1528889578.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:58.854Z,1528889578.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:58.871Z,1528889578.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T11:32:58.872Z,1528889578.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:59.262Z,1528889579.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:59.280Z,1528889579.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T11:32:59.281Z,1528889579.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:32:59.661Z,1528889579.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:32:59.679Z,1528889579.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T11:32:59.680Z,1528889579.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:00.065Z,1528889580.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:00.082Z,1528889580.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T11:33:00.083Z,1528889580.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:00.451Z,1528889580.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:00.473Z,1528889580.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T11:33:00.474Z,1528889580.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:00.857Z,1528889580.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:00.875Z,1528889580.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T11:33:00.876Z,1528889580.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:01.256Z,1528889581.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:01.288Z,1528889581.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T11:33:01.289Z,1528889581.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:01.651Z,1528889581.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:01.674Z,1528889581.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T11:33:01.675Z,1528889581.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:02.063Z,1528889582.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:02.080Z,1528889582.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T11:33:02.081Z,1528889582.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:02.465Z,1528889582.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:02.487Z,1528889582.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T11:33:02.488Z,1528889582.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:02.862Z,1528889582.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:02.886Z,1528889582.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T11:33:02.887Z,1528889582.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:03.257Z,1528889583.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:03.292Z,1528889583.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T11:33:03.292Z,1528889583.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:03.658Z,1528889583.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:03.680Z,1528889583.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:04.047Z,1528889584.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:04.083Z,1528889584.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:04.457Z,1528889584.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:04.476Z,1528889584.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:04.847Z,1528889584.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:04.886Z,1528889584.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:05.261Z,1528889585.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:05.285Z,1528889585.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:05.671Z,1528889585.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:05.689Z,1528889585.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:06.068Z,1528889586.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:06.087Z,1528889586.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:06.447Z,1528889586.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:06.483Z,1528889586.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:06.852Z,1528889586.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:06.892Z,1528889586.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:07.252Z,1528889587.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:07.283Z,1528889587.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:07.651Z,1528889587.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:07.678Z,1528889587.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:08.067Z,1528889588.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:08.092Z,1528889588.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:08.472Z,1528889588.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:08.496Z,1528889588.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:08.864Z,1528889588.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:08.883Z,1528889588.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:09.251Z,1528889589.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:09.284Z,1528889589.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:09.651Z,1528889589.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:09.681Z,1528889589.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:10.047Z,1528889590.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:10.083Z,1528889590.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:10.452Z,1528889590.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:10.487Z,1528889590.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:10.851Z,1528889590.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:10.883Z,1528889590.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:11.266Z,1528889591.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:11.289Z,1528889591.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:11.671Z,1528889591.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:11.689Z,1528889591.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:12.065Z,1528889592.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:12.090Z,1528889592.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:12.447Z,1528889592.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:12.480Z,1528889592.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:12.851Z,1528889592.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:12.888Z,1528889592.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:13.252Z,1528889593.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:13.283Z,1528889593.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:13.652Z,1528889593.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:13.692Z,1528889593.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:14.065Z,1528889594.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:14.099Z,1528889594.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:14.469Z,1528889594.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:14.498Z,1528889594.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:14.865Z,1528889594.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:14.899Z,1528889594.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:15.255Z,1528889595.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:15.273Z,1528889595.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:15.651Z,1528889595.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:15.660Z,1528889595.660 [BPC1](ERROR): Failed to parse Bank A battery data
2018-06-13T11:33:15.670Z,1528889595.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:16.055Z,1528889596.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:16.107Z,1528889596.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:16.456Z,1528889596.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:16.486Z,1528889596.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:16.854Z,1528889596.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:16.880Z,1528889596.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:17.263Z,1528889597.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:17.281Z,1528889597.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:17.663Z,1528889597.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:17.681Z,1528889597.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:18.064Z,1528889598.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:18.082Z,1528889598.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:18.458Z,1528889598.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:18.480Z,1528889598.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:18.859Z,1528889598.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:18.876Z,1528889598.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:19.255Z,1528889599.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:19.280Z,1528889599.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:19.655Z,1528889599.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:19.680Z,1528889599.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:20.066Z,1528889600.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:20.107Z,1528889600.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:20.468Z,1528889600.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:20.487Z,1528889600.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:20.866Z,1528889600.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:20.885Z,1528889600.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:21.255Z,1528889601.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:21.280Z,1528889601.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:21.654Z,1528889601.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:21.676Z,1528889601.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:22.055Z,1528889602.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:22.079Z,1528889602.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:22.455Z,1528889602.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:22.480Z,1528889602.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:22.853Z,1528889602.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:22.871Z,1528889602.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:23.267Z,1528889603.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:23.284Z,1528889603.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:23.666Z,1528889603.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:23.688Z,1528889603.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:24.066Z,1528889604.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:24.084Z,1528889604.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:24.457Z,1528889604.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:24.475Z,1528889604.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:24.855Z,1528889604.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:24.878Z,1528889604.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:25.259Z,1528889605.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:25.277Z,1528889605.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:25.657Z,1528889605.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:25.675Z,1528889605.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:26.067Z,1528889606.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:26.085Z,1528889606.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:26.467Z,1528889606.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:26.492Z,1528889606.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:26.866Z,1528889606.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:26.888Z,1528889606.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:27.255Z,1528889607.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:27.279Z,1528889607.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:27.658Z,1528889607.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:27.676Z,1528889607.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:28.055Z,1528889608.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:28.078Z,1528889608.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:28.455Z,1528889608.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:28.478Z,1528889608.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:28.853Z,1528889608.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:28.871Z,1528889608.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:29.266Z,1528889609.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:29.285Z,1528889609.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:29.666Z,1528889609.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:29.688Z,1528889609.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:30.067Z,1528889610.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:30.092Z,1528889610.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:30.457Z,1528889610.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:30.475Z,1528889610.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:30.855Z,1528889610.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:30.878Z,1528889610.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:31.258Z,1528889611.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:31.276Z,1528889611.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:31.655Z,1528889611.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:31.678Z,1528889611.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:32.067Z,1528889612.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:32.085Z,1528889612.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:32.466Z,1528889612.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:32.484Z,1528889612.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:32.866Z,1528889612.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:32.884Z,1528889612.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:33.261Z,1528889613.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:33.278Z,1528889613.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:33.653Z,1528889613.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:33.676Z,1528889613.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:34.055Z,1528889614.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:34.079Z,1528889614.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:34.455Z,1528889614.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:34.478Z,1528889614.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:34.858Z,1528889614.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:34.875Z,1528889614.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:35.266Z,1528889615.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:35.288Z,1528889615.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:35.666Z,1528889615.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:35.688Z,1528889615.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:36.067Z,1528889616.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:36.085Z,1528889616.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:36.455Z,1528889616.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:36.491Z,1528889616.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:36.855Z,1528889616.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:36.879Z,1528889616.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:37.258Z,1528889617.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:37.276Z,1528889617.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:37.655Z,1528889617.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:37.678Z,1528889617.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:38.066Z,1528889618.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:38.084Z,1528889618.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:38.465Z,1528889618.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:38.483Z,1528889618.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:38.866Z,1528889618.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:38.888Z,1528889618.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:39.255Z,1528889619.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:39.278Z,1528889619.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:39.654Z,1528889619.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:39.676Z,1528889619.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:40.055Z,1528889620.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:40.078Z,1528889620.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:40.462Z,1528889620.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:40.480Z,1528889620.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:40.858Z,1528889620.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:40.876Z,1528889620.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:43.981Z,1528889623.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:44.016Z,1528889624.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:44.165Z,1528889624.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:44.217Z,1528889624.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:44.554Z,1528889624.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:44.579Z,1528889624.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:44.943Z,1528889624.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:44.971Z,1528889624.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:45.336Z,1528889625.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:45.366Z,1528889625.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:45.731Z,1528889625.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:45.748Z,1528889625.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:46.141Z,1528889626.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:46.180Z,1528889626.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:46.549Z,1528889626.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:46.585Z,1528889626.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:46.950Z,1528889626.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:46.979Z,1528889626.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:47.335Z,1528889627.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:47.369Z,1528889627.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:47.735Z,1528889627.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:47.752Z,1528889627.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:48.139Z,1528889628.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:48.181Z,1528889628.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:48.539Z,1528889628.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:48.580Z,1528889628.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:48.950Z,1528889628.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:48.984Z,1528889628.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:49.349Z,1528889629.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:49.366Z,1528889629.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:49.750Z,1528889629.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:49.767Z,1528889629.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:50.139Z,1528889630.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:50.157Z,1528889630.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:50.542Z,1528889630.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:50.560Z,1528889630.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:50.941Z,1528889630.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:50.964Z,1528889630.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:51.346Z,1528889631.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:51.364Z,1528889631.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:51.749Z,1528889631.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:51.767Z,1528889631.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:52.146Z,1528889632.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:52.168Z,1528889632.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:52.539Z,1528889632.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:52.573Z,1528889632.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:52.942Z,1528889632.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:52.959Z,1528889632.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:53.341Z,1528889633.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:53.364Z,1528889633.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:53.739Z,1528889633.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:53.763Z,1528889633.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:54.150Z,1528889634.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:54.172Z,1528889634.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:54.550Z,1528889634.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:54.568Z,1528889634.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:54.950Z,1528889634.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:54.968Z,1528889634.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:55.334Z,1528889635.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:55.364Z,1528889635.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:55.741Z,1528889635.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:55.765Z,1528889635.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:56.139Z,1528889636.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:56.162Z,1528889636.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:56.540Z,1528889636.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:56.572Z,1528889636.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:56.941Z,1528889636.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:56.964Z,1528889636.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:57.350Z,1528889637.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:57.368Z,1528889637.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:57.751Z,1528889637.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:57.768Z,1528889637.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:58.151Z,1528889638.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:58.168Z,1528889638.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:58.541Z,1528889638.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:58.559Z,1528889638.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:58.939Z,1528889638.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:58.964Z,1528889638.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:59.342Z,1528889639.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:59.364Z,1528889639.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:33:59.739Z,1528889639.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:33:59.770Z,1528889639.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:00.151Z,1528889640.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:00.169Z,1528889640.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:00.550Z,1528889640.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:00.576Z,1528889640.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:00.950Z,1528889640.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:00.968Z,1528889640.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:01.336Z,1528889641.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:01.363Z,1528889641.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:01.741Z,1528889641.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:01.764Z,1528889641.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:02.134Z,1528889642.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:02.167Z,1528889642.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:02.539Z,1528889642.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:02.566Z,1528889642.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:02.942Z,1528889642.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:02.964Z,1528889642.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:03.353Z,1528889643.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:03.371Z,1528889643.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:03.749Z,1528889643.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:03.773Z,1528889643.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:04.152Z,1528889644.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:04.170Z,1528889644.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:04.546Z,1528889644.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:04.568Z,1528889644.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:04.944Z,1528889644.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:04.968Z,1528889644.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:05.344Z,1528889645.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:05.368Z,1528889645.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:05.739Z,1528889645.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:05.763Z,1528889645.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:06.151Z,1528889646.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:06.191Z,1528889646.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:06.551Z,1528889646.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:06.569Z,1528889646.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:06.951Z,1528889646.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:06.969Z,1528889646.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:07.342Z,1528889647.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:07.369Z,1528889647.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:07.735Z,1528889647.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:07.772Z,1528889647.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:08.135Z,1528889648.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:08.168Z,1528889648.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:08.536Z,1528889648.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:08.579Z,1528889648.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:08.931Z,1528889648.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:08.966Z,1528889648.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:09.352Z,1528889649.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:09.372Z,1528889649.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:09.754Z,1528889649.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:09.785Z,1528889649.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:10.142Z,1528889650.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:10.171Z,1528889650.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:10.535Z,1528889650.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:10.568Z,1528889650.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:10.935Z,1528889650.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:10.969Z,1528889650.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:11.336Z,1528889651.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:11.374Z,1528889651.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:11.735Z,1528889651.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:11.752Z,1528889651.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:12.154Z,1528889652.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:12.184Z,1528889652.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:12.554Z,1528889652.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:12.580Z,1528889652.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:12.954Z,1528889652.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:12.981Z,1528889652.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:13.339Z,1528889653.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:13.358Z,1528889653.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:13.734Z,1528889653.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:13.752Z,1528889653.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:14.138Z,1528889654.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:14.156Z,1528889654.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:14.538Z,1528889654.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:14.557Z,1528889654.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:14.936Z,1528889654.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:14.954Z,1528889654.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:15.349Z,1528889655.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:15.383Z,1528889655.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:15.753Z,1528889655.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:15.787Z,1528889655.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:16.146Z,1528889656.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:16.164Z,1528889656.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:16.539Z,1528889656.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:16.558Z,1528889656.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:16.941Z,1528889656.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:16.965Z,1528889656.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:17.337Z,1528889657.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:17.355Z,1528889657.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:17.741Z,1528889657.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:17.759Z,1528889657.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:18.150Z,1528889658.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:18.168Z,1528889658.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:18.546Z,1528889658.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:18.568Z,1528889658.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:18.946Z,1528889658.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:18.968Z,1528889658.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:19.342Z,1528889659.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:19.360Z,1528889659.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:19.735Z,1528889659.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:19.767Z,1528889659.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:20.140Z,1528889660.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:20.164Z,1528889660.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:20.543Z,1528889660.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:20.561Z,1528889660.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:20.935Z,1528889660.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:20.958Z,1528889660.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:21.346Z,1528889661.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:21.368Z,1528889661.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:21.750Z,1528889661.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:21.776Z,1528889661.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:22.147Z,1528889662.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:22.164Z,1528889662.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:22.545Z,1528889662.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:22.568Z,1528889662.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:22.942Z,1528889662.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:22.960Z,1528889662.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:23.335Z,1528889663.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:23.360Z,1528889663.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:23.739Z,1528889663.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:23.762Z,1528889663.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:24.151Z,1528889664.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:24.169Z,1528889664.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:24.555Z,1528889664.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:24.573Z,1528889664.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:24.951Z,1528889664.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:24.969Z,1528889664.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:25.342Z,1528889665.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:25.368Z,1528889665.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:25.731Z,1528889665.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:25.766Z,1528889665.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:26.135Z,1528889666.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:26.171Z,1528889666.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:26.536Z,1528889666.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:26.569Z,1528889666.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:26.931Z,1528889666.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:26.958Z,1528889666.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:27.356Z,1528889667.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:27.373Z,1528889667.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:27.756Z,1528889667.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:27.780Z,1528889667.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:28.152Z,1528889668.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:28.170Z,1528889668.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:28.535Z,1528889668.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:28.571Z,1528889668.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:28.935Z,1528889668.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:28.976Z,1528889668.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:29.336Z,1528889669.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:29.364Z,1528889669.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:29.735Z,1528889669.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:29.770Z,1528889669.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:30.156Z,1528889670.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:30.174Z,1528889670.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:30.545Z,1528889670.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:30.579Z,1528889670.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:30.945Z,1528889670.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:30.981Z,1528889670.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:31.335Z,1528889671.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:31.362Z,1528889671.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:31.735Z,1528889671.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:31.777Z,1528889671.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:32.139Z,1528889672.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:32.179Z,1528889672.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:32.536Z,1528889672.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:32.554Z,1528889672.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:32.935Z,1528889672.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:32.953Z,1528889672.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:33.349Z,1528889673.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:33.385Z,1528889673.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:33.753Z,1528889673.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:33.782Z,1528889673.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:34.150Z,1528889674.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:34.184Z,1528889674.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:34.539Z,1528889674.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:34.580Z,1528889674.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:34.938Z,1528889674.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:34.956Z,1528889674.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:35.334Z,1528889675.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:35.352Z,1528889675.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:35.738Z,1528889675.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:35.756Z,1528889675.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:36.146Z,1528889676.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:36.185Z,1528889676.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:36.549Z,1528889676.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:36.583Z,1528889676.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:36.950Z,1528889676.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:36.967Z,1528889676.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:37.341Z,1528889677.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:37.359Z,1528889677.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:37.735Z,1528889677.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:37.758Z,1528889677.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:38.138Z,1528889678.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:38.156Z,1528889678.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:38.540Z,1528889678.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:38.570Z,1528889678.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:38.942Z,1528889678.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:38.964Z,1528889678.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:39.350Z,1528889679.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:39.368Z,1528889679.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:39.751Z,1528889679.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:39.769Z,1528889679.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:40.147Z,1528889680.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:40.172Z,1528889680.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:40.545Z,1528889680.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:40.568Z,1528889680.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:40.947Z,1528889680.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:40.972Z,1528889680.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:41.346Z,1528889681.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:41.364Z,1528889681.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:41.745Z,1528889681.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:41.768Z,1528889681.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:42.154Z,1528889682.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:42.172Z,1528889682.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:45.258Z,1528889685.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:45.276Z,1528889685.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:45.421Z,1528889685.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:45.451Z,1528889685.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:45.807Z,1528889685.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:45.825Z,1528889685.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:46.206Z,1528889686.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:46.228Z,1528889686.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:46.604Z,1528889686.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:46.629Z,1528889686.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:47.006Z,1528889687.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:47.024Z,1528889687.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:47.408Z,1528889687.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:47.426Z,1528889687.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:47.814Z,1528889687.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:47.861Z,1528889687.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:48.215Z,1528889688.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:48.232Z,1528889688.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:48.602Z,1528889688.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:48.621Z,1528889688.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:49.004Z,1528889689.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:49.023Z,1528889689.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:49.404Z,1528889689.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:49.431Z,1528889689.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:49.800Z,1528889689.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:49.836Z,1528889689.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:50.216Z,1528889690.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:50.240Z,1528889690.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:50.617Z,1528889690.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:50.635Z,1528889690.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:51.017Z,1528889691.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:51.036Z,1528889691.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:51.407Z,1528889691.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:51.430Z,1528889691.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:51.807Z,1528889691.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:51.832Z,1528889691.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:52.204Z,1528889692.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:52.238Z,1528889692.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:52.596Z,1528889692.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:52.634Z,1528889692.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:53.003Z,1528889693.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:53.033Z,1528889693.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:53.414Z,1528889693.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:53.437Z,1528889693.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:53.823Z,1528889693.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:53.841Z,1528889693.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:54.218Z,1528889694.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:54.245Z,1528889694.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:54.599Z,1528889694.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:54.636Z,1528889694.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:54.999Z,1528889694.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:55.038Z,1528889695.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:55.400Z,1528889695.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:55.438Z,1528889695.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:55.799Z,1528889695.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:55.838Z,1528889695.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:56.210Z,1528889696.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:56.245Z,1528889696.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:56.617Z,1528889696.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:56.648Z,1528889696.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:57.010Z,1528889697.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:57.044Z,1528889697.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:57.399Z,1528889697.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:57.440Z,1528889697.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:57.804Z,1528889697.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:57.822Z,1528889697.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:58.203Z,1528889698.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:58.222Z,1528889698.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:58.604Z,1528889698.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:58.622Z,1528889698.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:59.003Z,1528889699.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:59.020Z,1528889699.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:59.406Z,1528889699.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:59.424Z,1528889699.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:34:59.814Z,1528889699.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:34:59.850Z,1528889699.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:00.214Z,1528889700.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:00.252Z,1528889700.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:00.602Z,1528889700.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:00.621Z,1528889700.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:01.002Z,1528889701.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:01.020Z,1528889701.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:01.404Z,1528889701.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:01.422Z,1528889701.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:01.799Z,1528889701.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:01.829Z,1528889701.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:02.210Z,1528889702.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:02.236Z,1528889702.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:02.614Z,1528889702.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:02.637Z,1528889702.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:03.010Z,1528889703.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:03.028Z,1528889703.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:03.404Z,1528889703.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:03.440Z,1528889703.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:03.806Z,1528889703.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:03.824Z,1528889703.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:04.199Z,1528889704.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:04.224Z,1528889704.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:04.603Z,1528889704.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:04.627Z,1528889704.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:05.003Z,1528889705.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:05.037Z,1528889705.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:05.416Z,1528889705.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:05.434Z,1528889705.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:05.815Z,1528889705.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:05.832Z,1528889705.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:06.216Z,1528889706.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:06.234Z,1528889706.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:06.595Z,1528889706.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:06.632Z,1528889706.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:07.006Z,1528889707.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:07.023Z,1528889707.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:07.403Z,1528889707.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:07.430Z,1528889707.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:07.795Z,1528889707.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:07.832Z,1528889707.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:08.220Z,1528889708.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:08.238Z,1528889708.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:08.620Z,1528889708.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:08.638Z,1528889708.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:09.016Z,1528889709.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:09.040Z,1528889709.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:09.403Z,1528889709.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:09.427Z,1528889709.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:09.803Z,1528889709.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:09.829Z,1528889709.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:10.195Z,1528889710.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:10.238Z,1528889710.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:10.595Z,1528889710.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:10.632Z,1528889710.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:11.003Z,1528889711.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:11.029Z,1528889711.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:11.412Z,1528889711.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:11.430Z,1528889711.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:11.819Z,1528889711.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:11.837Z,1528889711.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:12.218Z,1528889712.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:12.240Z,1528889712.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:12.606Z,1528889712.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:12.624Z,1528889712.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:13.003Z,1528889713.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:13.027Z,1528889713.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:13.403Z,1528889713.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:13.440Z,1528889713.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:13.795Z,1528889713.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:13.832Z,1528889713.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:14.216Z,1528889714.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:14.237Z,1528889714.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:14.620Z,1528889714.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:14.638Z,1528889714.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:15.016Z,1528889715.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:15.040Z,1528889715.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:15.403Z,1528889715.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:15.427Z,1528889715.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:15.806Z,1528889715.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:15.829Z,1528889715.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:16.195Z,1528889716.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:16.232Z,1528889716.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:16.603Z,1528889716.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:16.637Z,1528889716.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:16.000Z,1528889717.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:17.030Z,1528889717.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:17.416Z,1528889717.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:17.434Z,1528889717.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:17.818Z,1528889717.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:17.844Z,1528889717.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:18.218Z,1528889718.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:18.252Z,1528889718.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:18.599Z,1528889718.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:18.627Z,1528889718.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:18.999Z,1528889718.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:19.027Z,1528889719.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:19.400Z,1528889719.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:19.436Z,1528889719.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:19.800Z,1528889719.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:19.832Z,1528889719.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:20.216Z,1528889720.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:20.235Z,1528889720.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:20.618Z,1528889720.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:20.651Z,1528889720.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:21.010Z,1528889721.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:21.034Z,1528889721.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:21.399Z,1528889721.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:21.427Z,1528889721.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:21.801Z,1528889721.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:21.830Z,1528889721.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:22.199Z,1528889722.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:22.235Z,1528889722.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:22.600Z,1528889722.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:22.636Z,1528889722.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:22.999Z,1528889722.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:23.029Z,1528889723.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:23.417Z,1528889723.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:23.435Z,1528889723.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:23.821Z,1528889723.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:23.839Z,1528889723.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:24.220Z,1528889724.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:24.251Z,1528889724.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:24.599Z,1528889724.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:24.632Z,1528889724.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:24.999Z,1528889724.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:25.036Z,1528889725.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:25.400Z,1528889725.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:25.440Z,1528889725.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:25.795Z,1528889725.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:25.836Z,1528889725.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:26.210Z,1528889726.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:26.247Z,1528889726.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:26.618Z,1528889726.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:26.644Z,1528889726.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:27.010Z,1528889727.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:27.044Z,1528889727.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:27.399Z,1528889727.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:27.436Z,1528889727.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:27.800Z,1528889727.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:27.830Z,1528889727.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:28.199Z,1528889728.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:28.218Z,1528889728.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:28.605Z,1528889728.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:28.623Z,1528889728.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:29.004Z,1528889729.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:29.022Z,1528889729.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:29.417Z,1528889729.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:29.448Z,1528889729.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:29.814Z,1528889729.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:29.851Z,1528889729.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:30.215Z,1528889730.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:30.254Z,1528889730.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:30.604Z,1528889730.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:30.622Z,1528889730.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:31.006Z,1528889731.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:31.024Z,1528889731.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:31.408Z,1528889731.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:31.426Z,1528889731.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:31.799Z,1528889731.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:31.827Z,1528889731.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:32.206Z,1528889732.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:32.232Z,1528889732.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:32.614Z,1528889732.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:32.634Z,1528889732.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:33.010Z,1528889733.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:33.030Z,1528889733.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:33.406Z,1528889733.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:33.426Z,1528889733.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:33.802Z,1528889733.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:33.820Z,1528889733.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:34.199Z,1528889734.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:34.223Z,1528889734.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:34.604Z,1528889734.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:34.636Z,1528889734.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:35.006Z,1528889735.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:35.023Z,1528889735.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:35.411Z,1528889735.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:35.429Z,1528889735.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:35.814Z,1528889735.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:35.836Z,1528889735.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:36.214Z,1528889736.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:36.232Z,1528889736.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:36.599Z,1528889736.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:36.623Z,1528889736.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:37.005Z,1528889737.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:37.023Z,1528889737.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:37.406Z,1528889737.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:37.424Z,1528889737.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:37.799Z,1528889737.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:37.823Z,1528889737.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:38.214Z,1528889738.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:38.232Z,1528889738.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:38.611Z,1528889738.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:38.628Z,1528889738.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:39.010Z,1528889739.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:39.028Z,1528889739.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:39.403Z,1528889739.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:39.438Z,1528889739.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:39.806Z,1528889739.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:39.831Z,1528889739.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:40.199Z,1528889740.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:40.226Z,1528889740.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:40.606Z,1528889740.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:40.624Z,1528889740.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:41.007Z,1528889741.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:41.024Z,1528889741.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:44.125Z,1528889744.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:44.144Z,1528889744.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:44.308Z,1528889744.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:44.363Z,1528889744.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:44.693Z,1528889744.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:44.722Z,1528889744.722 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:44.722Z,1528889744.722 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 163
2018-06-13T11:35:44.722Z,1528889744.722 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:35:44.724Z,1528889744.724 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:44.724Z,1528889744.724 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 163
2018-06-13T11:35:44.724Z,1528889744.724 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:35:44.725Z,1528889744.725 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:44.726Z,1528889744.726 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 163
2018-06-13T11:35:44.726Z,1528889744.726 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:35:44.797Z,1528889744.797 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:35:44.797Z,1528889744.797 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:35:44.798Z,1528889744.798 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:35:45.080Z,1528889745.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:45.193Z,1528889745.193 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:35:45.193Z,1528889745.193 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 163
2018-06-13T11:35:45.194Z,1528889745.194 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:35:45.194Z,1528889745.194 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 163
2018-06-13T11:35:45.194Z,1528889745.194 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:35:45.194Z,1528889745.194 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 163
2018-06-13T11:35:45.478Z,1528889745.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:45.511Z,1528889745.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:35:45.511Z,1528889745.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:35:45.512Z,1528889745.512 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:35:45.512Z,1528889745.512 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:35:45.517Z,1528889745.517 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:35:45.517Z,1528889745.517 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:35:45.517Z,1528889745.517 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:35:45.518Z,1528889745.518 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:35:45.518Z,1528889745.518 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:35:45.886Z,1528889745.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:45.903Z,1528889745.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:35:45.904Z,1528889745.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:46.288Z,1528889746.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:46.314Z,1528889746.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:35:46.315Z,1528889746.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:46.694Z,1528889746.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:46.716Z,1528889746.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:35:46.717Z,1528889746.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:47.094Z,1528889747.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:47.111Z,1528889747.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:35:47.112Z,1528889747.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:47.479Z,1528889747.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:47.502Z,1528889747.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:35:47.503Z,1528889747.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:47.883Z,1528889747.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:47.905Z,1528889747.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:35:47.906Z,1528889747.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:48.286Z,1528889748.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:48.303Z,1528889748.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:35:48.304Z,1528889748.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:48.686Z,1528889748.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:48.703Z,1528889748.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:35:48.704Z,1528889748.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:49.083Z,1528889749.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:49.105Z,1528889749.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:35:49.106Z,1528889749.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:49.494Z,1528889749.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:49.512Z,1528889749.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:35:49.513Z,1528889749.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:49.894Z,1528889749.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:49.911Z,1528889749.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:35:49.912Z,1528889749.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:50.295Z,1528889750.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:50.312Z,1528889750.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:35:50.313Z,1528889750.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:50.686Z,1528889750.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:50.703Z,1528889750.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:35:50.704Z,1528889750.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:51.085Z,1528889751.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:51.103Z,1528889751.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:35:51.103Z,1528889751.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:51.483Z,1528889751.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:51.506Z,1528889751.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:35:51.507Z,1528889751.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:51.885Z,1528889751.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:51.902Z,1528889751.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:35:51.903Z,1528889751.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:52.294Z,1528889752.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:52.312Z,1528889752.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:35:52.313Z,1528889752.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:52.694Z,1528889752.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:52.716Z,1528889752.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:35:52.717Z,1528889752.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:53.095Z,1528889753.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:53.112Z,1528889753.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:35:53.113Z,1528889753.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:53.485Z,1528889753.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:53.502Z,1528889753.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:35:53.503Z,1528889753.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:53.883Z,1528889753.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:53.905Z,1528889753.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:35:53.906Z,1528889753.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:54.286Z,1528889754.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:54.303Z,1528889754.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:35:54.304Z,1528889754.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:54.686Z,1528889754.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:54.703Z,1528889754.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:35:54.704Z,1528889754.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:55.083Z,1528889755.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:55.115Z,1528889755.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:35:55.116Z,1528889755.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:55.495Z,1528889755.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:55.519Z,1528889755.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:35:55.520Z,1528889755.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:55.894Z,1528889755.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:55.912Z,1528889755.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:35:55.913Z,1528889755.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:56.297Z,1528889756.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:56.320Z,1528889756.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:35:56.325Z,1528889756.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:56.685Z,1528889756.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:56.702Z,1528889756.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:35:56.703Z,1528889756.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:57.085Z,1528889757.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:57.103Z,1528889757.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:35:57.104Z,1528889757.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:57.483Z,1528889757.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:57.512Z,1528889757.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:35:57.518Z,1528889757.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:57.879Z,1528889757.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:57.916Z,1528889757.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:35:57.917Z,1528889757.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:58.296Z,1528889758.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:58.313Z,1528889758.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:35:58.314Z,1528889758.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:58.699Z,1528889758.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:58.716Z,1528889758.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:35:58.717Z,1528889758.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:59.100Z,1528889759.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:59.118Z,1528889759.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:35:59.118Z,1528889759.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:59.479Z,1528889759.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:59.516Z,1528889759.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:35:59.517Z,1528889759.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:35:59.879Z,1528889759.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:35:59.911Z,1528889759.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:35:59.912Z,1528889759.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:00.279Z,1528889760.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:00.312Z,1528889760.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:36:00.313Z,1528889760.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:00.680Z,1528889760.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:00.711Z,1528889760.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:36:00.711Z,1528889760.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:01.079Z,1528889761.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:01.111Z,1528889761.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:36:01.111Z,1528889761.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:01.499Z,1528889761.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:01.521Z,1528889761.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:36:01.522Z,1528889761.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:01.900Z,1528889761.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:01.924Z,1528889761.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:36:01.925Z,1528889761.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:02.295Z,1528889762.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:02.313Z,1528889762.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:36:02.314Z,1528889762.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:02.683Z,1528889762.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:02.711Z,1528889762.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:36:02.712Z,1528889762.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:03.079Z,1528889763.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:03.111Z,1528889763.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:36:03.112Z,1528889763.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:03.480Z,1528889763.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:03.517Z,1528889763.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:36:03.518Z,1528889763.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:03.879Z,1528889763.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:03.917Z,1528889763.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:36:03.918Z,1528889763.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:04.300Z,1528889764.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:04.317Z,1528889764.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:36:04.318Z,1528889764.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:04.698Z,1528889764.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:04.719Z,1528889764.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T11:36:04.720Z,1528889764.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:05.093Z,1528889765.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:05.128Z,1528889765.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:05.479Z,1528889765.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:05.513Z,1528889765.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:05.879Z,1528889765.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:05.896Z,1528889765.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:06.280Z,1528889766.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:06.308Z,1528889766.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:06.682Z,1528889766.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:06.701Z,1528889766.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:07.082Z,1528889767.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:07.100Z,1528889767.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:07.497Z,1528889767.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:07.534Z,1528889767.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:07.893Z,1528889767.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:07.911Z,1528889767.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:08.290Z,1528889768.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:08.307Z,1528889768.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:08.685Z,1528889768.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:08.703Z,1528889768.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:09.084Z,1528889769.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:09.102Z,1528889769.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:09.485Z,1528889769.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:09.502Z,1528889769.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:09.886Z,1528889769.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:09.903Z,1528889769.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:10.290Z,1528889770.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:10.308Z,1528889770.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:10.693Z,1528889770.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:10.711Z,1528889770.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:11.093Z,1528889771.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:11.111Z,1528889771.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:11.484Z,1528889771.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:11.503Z,1528889771.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:11.884Z,1528889771.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:11.902Z,1528889771.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:12.280Z,1528889772.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:12.310Z,1528889772.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:12.686Z,1528889772.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:12.704Z,1528889772.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:13.085Z,1528889773.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:13.103Z,1528889773.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:13.492Z,1528889773.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:13.516Z,1528889773.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:13.893Z,1528889773.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:13.911Z,1528889773.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:14.294Z,1528889774.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:14.312Z,1528889774.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:14.686Z,1528889774.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:14.709Z,1528889774.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:15.082Z,1528889775.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:15.104Z,1528889775.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:15.483Z,1528889775.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:15.506Z,1528889775.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:15.891Z,1528889775.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:15.922Z,1528889775.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:16.301Z,1528889776.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:16.319Z,1528889776.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:16.700Z,1528889776.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:16.724Z,1528889776.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:17.105Z,1528889777.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:17.124Z,1528889777.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:17.476Z,1528889777.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:17.503Z,1528889777.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:17.879Z,1528889777.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:17.907Z,1528889777.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:18.279Z,1528889778.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:18.321Z,1528889778.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:18.680Z,1528889778.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:18.718Z,1528889778.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:19.079Z,1528889779.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:19.108Z,1528889779.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:19.501Z,1528889779.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:19.520Z,1528889779.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:19.895Z,1528889779.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:19.913Z,1528889779.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:20.295Z,1528889780.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:20.314Z,1528889780.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:20.679Z,1528889780.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:20.715Z,1528889780.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:21.079Z,1528889781.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:21.113Z,1528889781.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:21.480Z,1528889781.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:21.515Z,1528889781.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:21.883Z,1528889781.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:21.912Z,1528889781.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:22.296Z,1528889782.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:22.314Z,1528889782.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:22.699Z,1528889782.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:22.716Z,1528889782.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:23.100Z,1528889783.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:23.119Z,1528889783.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:23.479Z,1528889783.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:23.511Z,1528889783.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:23.883Z,1528889783.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:23.911Z,1528889783.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:24.279Z,1528889784.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:24.318Z,1528889784.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:24.680Z,1528889784.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:24.715Z,1528889784.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:25.079Z,1528889785.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:25.114Z,1528889785.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:25.500Z,1528889785.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:25.518Z,1528889785.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:25.889Z,1528889785.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:25.927Z,1528889785.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:26.289Z,1528889786.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:26.321Z,1528889786.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:26.680Z,1528889786.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:26.714Z,1528889786.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:27.079Z,1528889787.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:27.096Z,1528889787.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:27.480Z,1528889787.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:27.498Z,1528889787.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:27.880Z,1528889787.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:27.902Z,1528889787.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:28.293Z,1528889788.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:28.327Z,1528889788.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:28.694Z,1528889788.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:28.712Z,1528889788.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:29.093Z,1528889789.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:29.111Z,1528889789.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:29.484Z,1528889789.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:29.502Z,1528889789.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:29.883Z,1528889789.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:29.901Z,1528889789.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:30.285Z,1528889790.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:30.303Z,1528889790.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:30.681Z,1528889790.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:30.700Z,1528889790.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:31.082Z,1528889791.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:31.100Z,1528889791.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:31.497Z,1528889791.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:31.515Z,1528889791.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:31.893Z,1528889791.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:31.911Z,1528889791.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:32.290Z,1528889792.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:32.312Z,1528889792.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:32.686Z,1528889792.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:32.704Z,1528889792.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:33.079Z,1528889793.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:33.102Z,1528889793.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:33.484Z,1528889793.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:33.510Z,1528889793.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:33.879Z,1528889793.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:33.904Z,1528889793.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:34.295Z,1528889794.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:34.313Z,1528889794.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:34.694Z,1528889794.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:34.711Z,1528889794.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:35.095Z,1528889795.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:35.113Z,1528889795.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:35.479Z,1528889795.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:35.503Z,1528889795.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:35.883Z,1528889795.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:35.906Z,1528889795.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:36.286Z,1528889796.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:36.304Z,1528889796.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:36.685Z,1528889796.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:36.703Z,1528889796.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:37.083Z,1528889797.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:37.105Z,1528889797.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:37.494Z,1528889797.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:37.513Z,1528889797.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:37.894Z,1528889797.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:37.911Z,1528889797.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:38.294Z,1528889798.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:38.316Z,1528889798.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:38.686Z,1528889798.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:38.704Z,1528889798.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:39.085Z,1528889799.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:39.103Z,1528889799.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:39.483Z,1528889799.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:39.506Z,1528889799.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:39.883Z,1528889799.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:39.908Z,1528889799.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:40.295Z,1528889800.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:40.313Z,1528889800.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:40.697Z,1528889800.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:40.715Z,1528889800.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:41.097Z,1528889801.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:41.115Z,1528889801.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:44.194Z,1528889804.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:44.213Z,1528889804.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:44.338Z,1528889804.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:44.389Z,1528889804.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:44.752Z,1528889804.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:44.792Z,1528889804.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:45.146Z,1528889805.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:45.168Z,1528889805.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:45.539Z,1528889805.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:45.557Z,1528889805.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:45.923Z,1528889805.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:45.964Z,1528889805.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:46.323Z,1528889806.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:46.351Z,1528889806.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:46.724Z,1528889806.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:46.760Z,1528889806.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:47.123Z,1528889807.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:47.152Z,1528889807.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:47.540Z,1528889807.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:47.558Z,1528889807.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:47.943Z,1528889807.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:47.968Z,1528889807.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:48.344Z,1528889808.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:48.368Z,1528889808.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:48.723Z,1528889808.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:48.750Z,1528889808.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:49.123Z,1528889809.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:49.158Z,1528889809.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:49.524Z,1528889809.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:49.561Z,1528889809.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:49.919Z,1528889809.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:49.956Z,1528889809.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:50.333Z,1528889810.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:50.361Z,1528889810.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:50.745Z,1528889810.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:50.768Z,1528889810.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:51.134Z,1528889811.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:51.162Z,1528889811.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:51.523Z,1528889811.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:51.559Z,1528889811.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:51.923Z,1528889811.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:51.965Z,1528889811.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:52.319Z,1528889812.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:52.360Z,1528889812.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:52.724Z,1528889812.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:52.741Z,1528889812.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:53.123Z,1528889813.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:53.141Z,1528889813.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:53.533Z,1528889813.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:53.567Z,1528889813.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:53.937Z,1528889813.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:53.971Z,1528889813.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:54.337Z,1528889814.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:54.355Z,1528889814.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:54.728Z,1528889814.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:54.746Z,1528889814.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:55.128Z,1528889815.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:55.146Z,1528889815.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:55.528Z,1528889815.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:55.558Z,1528889815.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:55.930Z,1528889815.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:55.952Z,1528889815.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:56.338Z,1528889816.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:56.356Z,1528889816.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:56.740Z,1528889816.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:56.758Z,1528889816.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:57.136Z,1528889817.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:57.154Z,1528889817.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:57.527Z,1528889817.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:57.559Z,1528889817.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:57.930Z,1528889817.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:57.962Z,1528889817.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:58.327Z,1528889818.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:58.344Z,1528889818.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:58.731Z,1528889818.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:58.749Z,1528889818.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:59.127Z,1528889819.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:59.160Z,1528889819.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:59.541Z,1528889819.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:59.559Z,1528889819.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:36:59.943Z,1528889819.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:36:59.961Z,1528889819.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:00.344Z,1528889820.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:00.362Z,1528889820.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:00.720Z,1528889820.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:00.751Z,1528889820.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:01.126Z,1528889821.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:01.151Z,1528889821.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:01.527Z,1528889821.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:01.556Z,1528889821.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:01.919Z,1528889821.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:01.956Z,1528889821.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:02.340Z,1528889822.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:02.358Z,1528889822.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:02.744Z,1528889822.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:02.763Z,1528889822.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:03.139Z,1528889823.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:03.158Z,1528889823.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:03.533Z,1528889823.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:03.557Z,1528889823.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:03.923Z,1528889823.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:03.962Z,1528889823.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:04.319Z,1528889824.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:04.355Z,1528889824.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:04.724Z,1528889824.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:04.766Z,1528889824.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:05.123Z,1528889825.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:05.162Z,1528889825.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:05.540Z,1528889825.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:05.558Z,1528889825.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:05.943Z,1528889825.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:05.960Z,1528889825.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:06.342Z,1528889826.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:06.372Z,1528889826.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:06.719Z,1528889826.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:06.759Z,1528889826.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:07.123Z,1528889827.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:07.160Z,1528889827.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:07.524Z,1528889827.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:07.559Z,1528889827.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:07.923Z,1528889827.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:07.941Z,1528889827.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:08.337Z,1528889828.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:08.372Z,1528889828.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:08.741Z,1528889828.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:08.770Z,1528889828.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:09.137Z,1528889829.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:09.172Z,1528889829.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:09.527Z,1528889829.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:09.544Z,1528889829.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:09.926Z,1528889829.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:09.944Z,1528889829.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:10.326Z,1528889830.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:10.344Z,1528889830.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:10.726Z,1528889830.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:10.748Z,1528889830.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:11.126Z,1528889831.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:11.144Z,1528889831.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:11.533Z,1528889831.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:11.572Z,1528889831.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:11.937Z,1528889831.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:11.971Z,1528889831.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:12.338Z,1528889832.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:12.356Z,1528889832.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:12.728Z,1528889832.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:12.746Z,1528889832.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:13.128Z,1528889833.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:13.146Z,1528889833.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:13.529Z,1528889833.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:13.552Z,1528889833.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:13.923Z,1528889833.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:13.946Z,1528889833.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:14.333Z,1528889834.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:14.352Z,1528889834.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:14.737Z,1528889834.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:14.783Z,1528889834.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:15.138Z,1528889835.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:15.155Z,1528889835.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:15.529Z,1528889835.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:15.546Z,1528889835.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:15.930Z,1528889835.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:15.948Z,1528889835.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:16.329Z,1528889836.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:16.347Z,1528889836.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:16.729Z,1528889836.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:16.747Z,1528889836.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:17.130Z,1528889837.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:17.148Z,1528889837.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:17.534Z,1528889837.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:17.556Z,1528889837.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:17.937Z,1528889837.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:17.955Z,1528889837.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:18.337Z,1528889838.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:18.356Z,1528889838.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:18.723Z,1528889838.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:18.746Z,1528889838.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:19.129Z,1528889839.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:19.147Z,1528889839.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:19.529Z,1528889839.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:19.547Z,1528889839.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:19.930Z,1528889839.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:19.948Z,1528889839.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:20.334Z,1528889840.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:20.356Z,1528889840.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:20.737Z,1528889840.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:20.755Z,1528889840.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:21.134Z,1528889841.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:21.156Z,1528889841.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:21.530Z,1528889841.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:21.547Z,1528889841.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:21.931Z,1528889841.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:21.949Z,1528889841.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:22.334Z,1528889842.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:22.356Z,1528889842.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:22.737Z,1528889842.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:22.755Z,1528889842.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:23.137Z,1528889843.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:23.155Z,1528889843.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:23.523Z,1528889843.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:23.555Z,1528889843.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:23.929Z,1528889843.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:23.947Z,1528889843.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:24.337Z,1528889844.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:24.355Z,1528889844.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:24.734Z,1528889844.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:24.756Z,1528889844.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:25.134Z,1528889845.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:25.156Z,1528889845.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:25.531Z,1528889845.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:25.549Z,1528889845.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:25.923Z,1528889845.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:25.946Z,1528889845.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:26.334Z,1528889846.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:26.356Z,1528889846.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:26.738Z,1528889846.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:26.756Z,1528889846.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:27.134Z,1528889847.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:27.156Z,1528889847.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:27.530Z,1528889847.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:27.548Z,1528889847.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:27.930Z,1528889847.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:27.948Z,1528889847.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:28.334Z,1528889848.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:28.352Z,1528889848.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:28.738Z,1528889848.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:28.756Z,1528889848.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:29.137Z,1528889849.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:29.155Z,1528889849.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:29.531Z,1528889849.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:29.549Z,1528889849.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:29.928Z,1528889849.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:29.946Z,1528889849.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:30.337Z,1528889850.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:30.355Z,1528889850.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:30.734Z,1528889850.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:30.752Z,1528889850.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:31.134Z,1528889851.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:31.156Z,1528889851.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:31.531Z,1528889851.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:31.549Z,1528889851.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:31.929Z,1528889851.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:31.946Z,1528889851.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:32.334Z,1528889852.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:32.356Z,1528889852.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:32.737Z,1528889852.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:32.755Z,1528889852.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:33.135Z,1528889853.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:33.153Z,1528889853.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:33.522Z,1528889853.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:33.552Z,1528889853.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:33.927Z,1528889853.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:33.952Z,1528889853.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:34.339Z,1528889854.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:34.357Z,1528889854.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:34.739Z,1528889854.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:34.756Z,1528889854.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:35.139Z,1528889855.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:35.158Z,1528889855.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:35.523Z,1528889855.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:35.548Z,1528889855.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:35.934Z,1528889855.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:35.952Z,1528889855.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:36.340Z,1528889856.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:36.358Z,1528889856.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:36.739Z,1528889856.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:36.757Z,1528889856.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:37.136Z,1528889857.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:37.154Z,1528889857.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:37.528Z,1528889857.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:37.560Z,1528889857.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:37.920Z,1528889857.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:37.956Z,1528889857.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:38.342Z,1528889858.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:38.384Z,1528889858.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:38.741Z,1528889858.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:38.759Z,1528889858.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:39.134Z,1528889859.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:39.166Z,1528889859.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:39.528Z,1528889859.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:39.554Z,1528889859.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:39.931Z,1528889859.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:39.949Z,1528889859.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:40.337Z,1528889860.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:40.355Z,1528889860.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:40.742Z,1528889860.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:40.761Z,1528889860.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:40.764Z,1528889860.764 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T11:37:40.764Z,1528889860.764 [Default:CheckIn:C.Wait] Stopped
2018-06-13T11:37:40.764Z,1528889860.764 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T11:37:40.764Z,1528889860.764 [Default:CheckIn:D] Running Loop=1
2018-06-13T11:37:41.144Z,1528889861.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:41.163Z,1528889861.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:41.166Z,1528889861.166 [Default:CheckIn:D] Stopped
2018-06-13T11:37:41.166Z,1528889861.166 [Default:CheckIn:E] Running Loop=1
2018-06-13T11:37:41.523Z,1528889861.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:41.561Z,1528889861.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:41.564Z,1528889861.564 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 490.462012 min 
2018-06-13T11:37:41.564Z,1528889861.564 [Default:CheckIn:E] Stopped
2018-06-13T11:37:41.564Z,1528889861.564 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T11:37:41.564Z,1528889861.564 [Default:CheckIn] Stopped
2018-06-13T11:37:41.565Z,1528889861.565 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T11:37:41.565Z,1528889861.565 [Default:CheckIn](INFO): Running loop #48
2018-06-13T11:37:41.565Z,1528889861.565 [Default:CheckIn] Running Loop=48
2018-06-13T11:37:41.565Z,1528889861.565 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T11:37:41.565Z,1528889861.565 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T11:37:41.923Z,1528889861.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:41.952Z,1528889861.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:42.337Z,1528889862.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:42.381Z,1528889862.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:45.441Z,1528889865.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:45.480Z,1528889865.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:45.621Z,1528889865.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:45.659Z,1528889865.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:45.996Z,1528889865.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:46.032Z,1528889866.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:46.394Z,1528889866.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:46.422Z,1528889866.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:46.796Z,1528889866.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:46.824Z,1528889866.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:47.195Z,1528889867.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:47.231Z,1528889867.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:47.602Z,1528889867.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:47.636Z,1528889867.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:48.009Z,1528889868.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:48.035Z,1528889868.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:48.414Z,1528889868.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:48.432Z,1528889868.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:48.791Z,1528889868.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:48.824Z,1528889868.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:49.195Z,1528889869.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:49.228Z,1528889869.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:49.595Z,1528889869.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:49.633Z,1528889869.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:49.991Z,1528889869.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:50.009Z,1528889870.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:50.405Z,1528889870.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:50.443Z,1528889870.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:50.809Z,1528889870.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:50.838Z,1528889870.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:51.206Z,1528889871.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:51.241Z,1528889871.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:51.595Z,1528889871.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:51.636Z,1528889871.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:51.994Z,1528889871.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:52.011Z,1528889872.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:52.394Z,1528889872.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:52.412Z,1528889872.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:52.795Z,1528889872.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:52.814Z,1528889872.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:53.193Z,1528889873.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:53.218Z,1528889873.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:53.605Z,1528889873.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:53.639Z,1528889873.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:54.013Z,1528889874.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:54.046Z,1528889874.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:54.405Z,1528889874.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:54.422Z,1528889874.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:54.794Z,1528889874.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:54.812Z,1528889874.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:55.198Z,1528889875.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:55.216Z,1528889875.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:55.594Z,1528889875.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:55.612Z,1528889875.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:55.995Z,1528889875.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:56.012Z,1528889876.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:56.405Z,1528889876.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:56.423Z,1528889876.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:56.805Z,1528889876.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:56.822Z,1528889876.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:57.205Z,1528889877.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:57.223Z,1528889877.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:57.598Z,1528889877.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:57.616Z,1528889877.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:57.998Z,1528889877.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:58.015Z,1528889878.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:58.396Z,1528889878.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:58.420Z,1528889878.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:58.799Z,1528889878.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:58.816Z,1528889878.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:59.198Z,1528889879.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:59.221Z,1528889879.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:37:59.609Z,1528889879.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:37:59.627Z,1528889879.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:00.010Z,1528889880.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:00.032Z,1528889880.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:00.405Z,1528889880.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:00.428Z,1528889880.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:00.797Z,1528889880.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:00.815Z,1528889880.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:01.195Z,1528889881.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:01.217Z,1528889881.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:01.598Z,1528889881.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:01.615Z,1528889881.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:01.997Z,1528889881.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:02.014Z,1528889882.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:02.405Z,1528889882.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:02.423Z,1528889882.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:02.805Z,1528889882.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:02.823Z,1528889882.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:03.206Z,1528889883.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:03.215Z,1528889883.215 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T11:38:03.215Z,1528889883.215 [BPC1] Communications Fault, FailCount= 6
2018-06-13T11:38:03.215Z,1528889883.215 [BPC1](ERROR): Communications Fault
2018-06-13T11:38:03.226Z,1528889883.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:03.325Z,1528889883.325 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T11:38:03.597Z,1528889883.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:03.615Z,1528889883.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:03.997Z,1528889883.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:04.015Z,1528889884.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:04.401Z,1528889884.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:04.418Z,1528889884.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:04.493Z,1528889884.493 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T11:38:04.493Z,1528889884.493 [BPC1] No Fault, FailCount= 6
2018-06-13T11:38:04.795Z,1528889884.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:04.879Z,1528889884.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:05.203Z,1528889885.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:05.226Z,1528889885.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:05.605Z,1528889885.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:05.623Z,1528889885.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:06.009Z,1528889886.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:06.027Z,1528889886.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:06.406Z,1528889886.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:06.424Z,1528889886.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:06.801Z,1528889886.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:06.819Z,1528889886.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:07.200Z,1528889887.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:07.218Z,1528889887.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:07.599Z,1528889887.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:07.616Z,1528889887.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:08.001Z,1528889888.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:08.018Z,1528889888.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:08.406Z,1528889888.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:08.428Z,1528889888.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:08.809Z,1528889888.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:08.832Z,1528889888.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:09.206Z,1528889889.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:09.228Z,1528889889.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:09.596Z,1528889889.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:09.626Z,1528889889.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:09.995Z,1528889889.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:10.023Z,1528889890.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:10.412Z,1528889890.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:10.430Z,1528889890.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:10.815Z,1528889890.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:10.833Z,1528889890.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:11.217Z,1528889891.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:11.240Z,1528889891.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:11.596Z,1528889891.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:11.623Z,1528889891.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:11.995Z,1528889891.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:12.032Z,1528889892.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:12.416Z,1528889892.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:12.434Z,1528889892.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:12.815Z,1528889892.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:12.833Z,1528889892.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:13.212Z,1528889893.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:13.230Z,1528889893.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:13.595Z,1528889893.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:13.623Z,1528889893.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:13.991Z,1528889893.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:14.027Z,1528889894.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:14.412Z,1528889894.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:14.436Z,1528889894.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:14.816Z,1528889894.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:14.840Z,1528889894.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:15.211Z,1528889895.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:15.229Z,1528889895.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:15.595Z,1528889895.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:15.622Z,1528889895.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:15.991Z,1528889895.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:16.034Z,1528889896.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:16.413Z,1528889896.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:16.430Z,1528889896.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:16.815Z,1528889896.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:16.833Z,1528889896.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:17.218Z,1528889897.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:17.236Z,1528889897.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:17.596Z,1528889897.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:17.623Z,1528889897.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:17.995Z,1528889897.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:18.022Z,1528889898.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:18.416Z,1528889898.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:18.434Z,1528889898.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:18.815Z,1528889898.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:18.833Z,1528889898.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:19.212Z,1528889899.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:19.236Z,1528889899.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:19.596Z,1528889899.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:19.624Z,1528889899.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:19.995Z,1528889899.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:20.022Z,1528889900.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:20.412Z,1528889900.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:20.437Z,1528889900.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:20.816Z,1528889900.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:20.840Z,1528889900.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:21.212Z,1528889901.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:21.230Z,1528889901.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:21.595Z,1528889901.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:21.623Z,1528889901.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:21.991Z,1528889901.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:22.021Z,1528889902.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:22.416Z,1528889902.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:22.440Z,1528889902.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:22.812Z,1528889902.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:22.830Z,1528889902.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:23.215Z,1528889903.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:23.240Z,1528889903.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:23.596Z,1528889903.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:23.623Z,1528889903.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:23.995Z,1528889903.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:24.023Z,1528889904.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:24.410Z,1528889904.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:24.436Z,1528889904.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:24.813Z,1528889904.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:24.831Z,1528889904.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:25.212Z,1528889905.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:25.236Z,1528889905.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:25.596Z,1528889905.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:25.628Z,1528889905.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:25.992Z,1528889905.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:26.029Z,1528889906.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:26.406Z,1528889906.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:26.431Z,1528889906.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:26.818Z,1528889906.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:26.844Z,1528889906.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:27.212Z,1528889907.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:27.231Z,1528889907.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:27.595Z,1528889907.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:27.627Z,1528889907.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:27.996Z,1528889907.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:28.032Z,1528889908.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:28.407Z,1528889908.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:28.425Z,1528889908.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:28.811Z,1528889908.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:28.829Z,1528889908.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:29.215Z,1528889909.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:29.240Z,1528889909.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:29.592Z,1528889909.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:29.628Z,1528889909.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:29.995Z,1528889909.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:30.037Z,1528889910.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:30.416Z,1528889910.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:30.435Z,1528889910.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:30.805Z,1528889910.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:30.840Z,1528889910.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:31.201Z,1528889911.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:31.228Z,1528889911.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:31.592Z,1528889911.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:31.626Z,1528889911.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:31.995Z,1528889911.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:32.036Z,1528889912.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:32.405Z,1528889912.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:32.432Z,1528889912.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:32.809Z,1528889912.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:32.839Z,1528889912.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:33.201Z,1528889913.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:33.232Z,1528889913.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:33.595Z,1528889913.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:33.613Z,1528889913.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:33.995Z,1528889913.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:34.020Z,1528889914.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:34.409Z,1528889914.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:34.443Z,1528889914.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:34.810Z,1528889914.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:34.848Z,1528889914.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:35.209Z,1528889915.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:35.227Z,1528889915.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:35.598Z,1528889915.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:35.615Z,1528889915.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:36.000Z,1528889916.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:36.018Z,1528889916.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:36.409Z,1528889916.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:36.427Z,1528889916.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:36.802Z,1528889916.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:36.820Z,1528889916.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:37.206Z,1528889917.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:37.223Z,1528889917.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:37.602Z,1528889917.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:37.620Z,1528889917.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:37.991Z,1528889917.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:38.020Z,1528889918.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:38.406Z,1528889918.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:38.424Z,1528889918.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:38.805Z,1528889918.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:38.828Z,1528889918.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:39.206Z,1528889919.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:39.224Z,1528889919.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:39.595Z,1528889919.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:39.627Z,1528889919.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:39.995Z,1528889919.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:40.020Z,1528889920.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:40.403Z,1528889920.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:40.421Z,1528889920.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:40.806Z,1528889920.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:40.828Z,1528889920.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:41.210Z,1528889921.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:41.227Z,1528889921.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:44.315Z,1528889924.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:44.356Z,1528889924.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:44.479Z,1528889924.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:44.516Z,1528889924.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:44.863Z,1528889924.863 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T11:38:44.863Z,1528889924.863 [NAL9602] Data Fault, FailCount= 5
2018-06-13T11:38:44.863Z,1528889924.863 [NAL9602](ERROR): Data Fault
2018-06-13T11:38:44.880Z,1528889924.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:44.920Z,1528889924.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:45.001Z,1528889925.001 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T11:38:45.002Z,1528889925.002 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T11:38:45.263Z,1528889925.263 [NAL9602](INFO): Powering down
2018-06-13T11:38:45.280Z,1528889925.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:45.314Z,1528889925.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:45.395Z,1528889925.395 [CBIT](INFO): Critical error at 20180613T113845
2018-06-13T11:38:45.674Z,1528889925.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:45.692Z,1528889925.692 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:45.693Z,1528889925.693 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 164
2018-06-13T11:38:45.693Z,1528889925.693 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:38:45.695Z,1528889925.695 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:45.695Z,1528889925.695 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 164
2018-06-13T11:38:45.695Z,1528889925.695 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:38:45.696Z,1528889925.696 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:45.696Z,1528889925.696 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 164
2018-06-13T11:38:45.717Z,1528889925.717 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:38:45.806Z,1528889925.806 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:38:45.806Z,1528889925.806 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:38:45.806Z,1528889925.806 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:38:46.073Z,1528889926.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:46.161Z,1528889926.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:38:46.161Z,1528889926.161 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 164
2018-06-13T11:38:46.162Z,1528889926.162 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:38:46.162Z,1528889926.162 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 164
2018-06-13T11:38:46.162Z,1528889926.162 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:38:46.162Z,1528889926.162 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 164
2018-06-13T11:38:46.473Z,1528889926.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:46.490Z,1528889926.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:38:46.490Z,1528889926.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:38:46.491Z,1528889926.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:38:46.491Z,1528889926.491 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:38:46.491Z,1528889926.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:38:46.492Z,1528889926.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:38:46.492Z,1528889926.492 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:38:46.492Z,1528889926.492 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:38:46.493Z,1528889926.493 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:38:46.872Z,1528889926.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:46.905Z,1528889926.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:38:46.906Z,1528889926.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:47.279Z,1528889927.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:47.296Z,1528889927.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:38:47.297Z,1528889927.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:47.677Z,1528889927.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:47.694Z,1528889927.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:38:47.695Z,1528889927.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:48.080Z,1528889928.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:48.104Z,1528889928.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:38:48.104Z,1528889928.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:48.479Z,1528889928.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:48.497Z,1528889928.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:38:48.498Z,1528889928.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:48.875Z,1528889928.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:48.893Z,1528889928.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:38:48.894Z,1528889928.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:49.280Z,1528889929.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:49.297Z,1528889929.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:38:49.298Z,1528889929.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:49.676Z,1528889929.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:49.699Z,1528889929.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:38:49.700Z,1528889929.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:50.075Z,1528889930.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:50.093Z,1528889930.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:38:50.094Z,1528889930.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:50.472Z,1528889930.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:50.502Z,1528889930.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:38:50.503Z,1528889930.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:50.875Z,1528889930.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:50.893Z,1528889930.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:38:50.893Z,1528889930.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:51.276Z,1528889931.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:51.294Z,1528889931.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:38:51.295Z,1528889931.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:51.680Z,1528889931.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:51.699Z,1528889931.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:38:51.699Z,1528889931.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:52.080Z,1528889932.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:52.097Z,1528889932.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:38:52.098Z,1528889932.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:52.484Z,1528889932.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:52.502Z,1528889932.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:38:52.502Z,1528889932.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:52.878Z,1528889932.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:52.909Z,1528889932.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:38:52.910Z,1528889932.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:53.279Z,1528889933.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:53.297Z,1528889933.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:38:53.298Z,1528889933.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:53.676Z,1528889933.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:53.694Z,1528889933.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:38:53.695Z,1528889933.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:54.080Z,1528889934.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:54.104Z,1528889934.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:38:54.105Z,1528889934.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:54.481Z,1528889934.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:54.498Z,1528889934.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:38:54.499Z,1528889934.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:54.880Z,1528889934.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:54.897Z,1528889934.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:38:54.898Z,1528889934.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:55.280Z,1528889935.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:55.297Z,1528889935.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:38:55.298Z,1528889935.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:55.680Z,1528889935.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:55.697Z,1528889935.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:38:55.698Z,1528889935.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:56.075Z,1528889936.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:56.093Z,1528889936.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:38:56.094Z,1528889936.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:56.478Z,1528889936.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:56.512Z,1528889936.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:38:56.513Z,1528889936.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:56.879Z,1528889936.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:56.897Z,1528889936.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:38:56.898Z,1528889936.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:57.276Z,1528889937.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:57.294Z,1528889937.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:38:57.295Z,1528889937.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:57.680Z,1528889937.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:57.704Z,1528889937.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:38:57.705Z,1528889937.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:58.076Z,1528889938.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:58.093Z,1528889938.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:38:58.094Z,1528889938.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:58.479Z,1528889938.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:58.497Z,1528889938.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:38:58.498Z,1528889938.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:58.878Z,1528889938.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:58.909Z,1528889938.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:38:58.910Z,1528889938.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:59.276Z,1528889939.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:59.294Z,1528889939.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:38:59.295Z,1528889939.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:38:59.676Z,1528889939.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:38:59.694Z,1528889939.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:38:59.695Z,1528889939.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:00.079Z,1528889940.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:00.096Z,1528889940.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:39:00.098Z,1528889940.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:00.479Z,1528889940.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:00.497Z,1528889940.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:39:00.498Z,1528889940.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:00.879Z,1528889940.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:00.897Z,1528889940.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:39:00.898Z,1528889940.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:01.280Z,1528889941.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:01.298Z,1528889941.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:39:01.299Z,1528889941.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:01.680Z,1528889941.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:01.697Z,1528889941.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:39:01.698Z,1528889941.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:02.076Z,1528889942.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:02.094Z,1528889942.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:39:02.095Z,1528889942.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:02.480Z,1528889942.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:02.504Z,1528889942.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:39:02.505Z,1528889942.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:02.879Z,1528889942.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:02.897Z,1528889942.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:39:02.898Z,1528889942.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:03.275Z,1528889943.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:03.293Z,1528889943.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:39:03.294Z,1528889943.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:03.678Z,1528889943.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:03.700Z,1528889943.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:39:03.701Z,1528889943.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:04.081Z,1528889944.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:04.098Z,1528889944.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:39:04.099Z,1528889944.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:04.480Z,1528889944.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:04.497Z,1528889944.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:39:04.498Z,1528889944.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:04.878Z,1528889944.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:04.908Z,1528889944.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:39:04.909Z,1528889944.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:05.280Z,1528889945.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:05.339Z,1528889945.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:39:05.340Z,1528889945.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:05.677Z,1528889945.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:05.695Z,1528889945.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:06.080Z,1528889946.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:06.101Z,1528889946.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:06.480Z,1528889946.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:06.497Z,1528889946.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:06.884Z,1528889946.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:06.903Z,1528889946.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:07.278Z,1528889947.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:07.309Z,1528889947.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:07.680Z,1528889947.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:07.698Z,1528889947.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:08.077Z,1528889948.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:08.095Z,1528889948.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:08.481Z,1528889948.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:08.504Z,1528889948.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:08.882Z,1528889948.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:08.900Z,1528889948.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:09.278Z,1528889949.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:09.296Z,1528889949.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:09.681Z,1528889949.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:09.700Z,1528889949.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:10.081Z,1528889950.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:10.099Z,1528889950.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:10.481Z,1528889950.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:10.499Z,1528889950.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:10.878Z,1528889950.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:10.909Z,1528889950.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:11.284Z,1528889951.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:11.302Z,1528889951.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:11.671Z,1528889951.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:11.702Z,1528889951.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:12.071Z,1528889952.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:12.113Z,1528889952.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:12.475Z,1528889952.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:12.511Z,1528889952.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:12.875Z,1528889952.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:12.904Z,1528889952.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:13.275Z,1528889953.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:13.309Z,1528889953.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:13.675Z,1528889953.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:13.708Z,1528889953.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:14.074Z,1528889954.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:14.104Z,1528889954.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:14.470Z,1528889954.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:14.498Z,1528889954.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:14.874Z,1528889954.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:14.908Z,1528889954.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:15.274Z,1528889955.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:15.302Z,1528889955.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:15.675Z,1528889955.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:15.712Z,1528889955.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:16.074Z,1528889956.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:16.109Z,1528889956.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:16.474Z,1528889956.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:16.502Z,1528889956.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:16.874Z,1528889956.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:16.900Z,1528889956.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:17.274Z,1528889957.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:17.308Z,1528889957.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:17.670Z,1528889957.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:17.696Z,1528889957.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:18.074Z,1528889958.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:18.103Z,1528889958.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:18.475Z,1528889958.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:18.513Z,1528889958.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:18.874Z,1528889958.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:18.892Z,1528889958.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:19.277Z,1528889959.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:19.294Z,1528889959.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:19.676Z,1528889959.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:19.694Z,1528889959.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:20.072Z,1528889960.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:20.090Z,1528889960.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:20.474Z,1528889960.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:20.506Z,1528889960.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:20.878Z,1528889960.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:20.896Z,1528889960.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:21.273Z,1528889961.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:21.291Z,1528889961.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:21.678Z,1528889961.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:21.696Z,1528889961.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:22.078Z,1528889962.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:22.100Z,1528889962.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:22.477Z,1528889962.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:22.495Z,1528889962.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:22.877Z,1528889962.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:22.894Z,1528889962.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:23.275Z,1528889963.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:23.293Z,1528889963.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:23.673Z,1528889963.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:23.691Z,1528889963.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:24.077Z,1528889964.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:24.094Z,1528889964.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:24.477Z,1528889964.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:24.495Z,1528889964.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:24.877Z,1528889964.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:24.895Z,1528889964.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:25.277Z,1528889965.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:25.295Z,1528889965.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:25.677Z,1528889965.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:25.695Z,1528889965.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:26.073Z,1528889966.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:26.091Z,1528889966.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:26.477Z,1528889966.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:26.494Z,1528889966.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:26.877Z,1528889966.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:26.895Z,1528889966.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:27.273Z,1528889967.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:27.292Z,1528889967.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:27.677Z,1528889967.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:27.694Z,1528889967.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:28.078Z,1528889968.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:28.096Z,1528889968.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:28.477Z,1528889968.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:28.495Z,1528889968.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:28.877Z,1528889968.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:28.894Z,1528889968.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:29.278Z,1528889969.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:29.296Z,1528889969.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:29.673Z,1528889969.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:29.691Z,1528889969.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:30.078Z,1528889970.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:30.095Z,1528889970.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:30.477Z,1528889970.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:30.495Z,1528889970.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:30.877Z,1528889970.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:30.895Z,1528889970.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:31.277Z,1528889971.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:31.294Z,1528889971.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:31.677Z,1528889971.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:31.696Z,1528889971.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:32.075Z,1528889972.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:32.094Z,1528889972.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:32.477Z,1528889972.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:32.494Z,1528889972.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:32.878Z,1528889972.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:32.896Z,1528889972.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:33.275Z,1528889973.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:33.293Z,1528889973.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:33.677Z,1528889973.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:33.694Z,1528889973.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:34.077Z,1528889974.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:34.101Z,1528889974.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:34.475Z,1528889974.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:34.494Z,1528889974.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:34.878Z,1528889974.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:34.896Z,1528889974.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:35.277Z,1528889975.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:35.295Z,1528889975.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:35.676Z,1528889975.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:35.694Z,1528889975.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:36.077Z,1528889976.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:36.094Z,1528889976.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:36.477Z,1528889976.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:36.500Z,1528889976.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:36.878Z,1528889976.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:36.896Z,1528889976.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:37.277Z,1528889977.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:37.294Z,1528889977.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:37.678Z,1528889977.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:37.696Z,1528889977.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:38.075Z,1528889978.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:38.093Z,1528889978.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:38.477Z,1528889978.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:38.494Z,1528889978.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:38.877Z,1528889978.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:38.896Z,1528889978.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:39.275Z,1528889979.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:39.293Z,1528889979.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:39.681Z,1528889979.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:39.699Z,1528889979.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:40.077Z,1528889980.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:40.096Z,1528889980.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:40.477Z,1528889980.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:40.495Z,1528889980.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:40.881Z,1528889980.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:40.898Z,1528889980.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:41.277Z,1528889981.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:41.296Z,1528889981.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:44.387Z,1528889984.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:44.406Z,1528889984.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:44.546Z,1528889984.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:44.580Z,1528889984.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:44.942Z,1528889984.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:44.984Z,1528889984.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:45.346Z,1528889985.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:45.364Z,1528889985.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:45.741Z,1528889985.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:45.758Z,1528889985.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:46.141Z,1528889986.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:46.159Z,1528889986.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:46.539Z,1528889986.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:46.557Z,1528889986.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:46.941Z,1528889986.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:46.959Z,1528889986.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:47.341Z,1528889987.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:47.364Z,1528889987.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:47.742Z,1528889987.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:47.760Z,1528889987.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:48.139Z,1528889988.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:48.160Z,1528889988.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:48.542Z,1528889988.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:48.560Z,1528889988.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:48.939Z,1528889988.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:48.957Z,1528889988.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:49.341Z,1528889989.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:49.358Z,1528889989.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:49.742Z,1528889989.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:49.761Z,1528889989.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:50.140Z,1528889990.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:50.158Z,1528889990.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:50.543Z,1528889990.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:50.561Z,1528889990.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:50.944Z,1528889990.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:50.962Z,1528889990.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:51.343Z,1528889991.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:51.361Z,1528889991.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:51.742Z,1528889991.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:51.777Z,1528889991.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:52.144Z,1528889992.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:52.162Z,1528889992.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:52.545Z,1528889992.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:52.563Z,1528889992.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:52.944Z,1528889992.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:52.961Z,1528889992.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:53.348Z,1528889993.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:53.367Z,1528889993.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:53.745Z,1528889993.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:53.763Z,1528889993.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:54.143Z,1528889994.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:54.173Z,1528889994.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:54.542Z,1528889994.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:54.568Z,1528889994.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:54.944Z,1528889994.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:54.962Z,1528889994.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:55.345Z,1528889995.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:55.362Z,1528889995.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:55.742Z,1528889995.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:55.767Z,1528889995.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:56.134Z,1528889996.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:56.169Z,1528889996.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:56.538Z,1528889996.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:56.566Z,1528889996.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:56.938Z,1528889996.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:56.968Z,1528889996.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:57.338Z,1528889997.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:57.364Z,1528889997.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:57.735Z,1528889997.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:57.764Z,1528889997.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:58.139Z,1528889998.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:58.172Z,1528889998.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:58.539Z,1528889998.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:58.577Z,1528889998.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:58.939Z,1528889998.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:58.977Z,1528889998.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:59.336Z,1528889999.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:59.362Z,1528889999.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:39:59.734Z,1528889999.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:39:59.753Z,1528889999.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:00.138Z,1528890000.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:00.156Z,1528890000.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:00.542Z,1528890000.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:00.577Z,1528890000.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:00.942Z,1528890000.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:00.961Z,1528890000.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:01.341Z,1528890001.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:01.361Z,1528890001.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:01.741Z,1528890001.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:01.759Z,1528890001.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:02.137Z,1528890002.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:02.155Z,1528890002.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:02.541Z,1528890002.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:02.558Z,1528890002.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:02.940Z,1528890002.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:02.957Z,1528890002.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:03.340Z,1528890003.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:03.358Z,1528890003.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:03.743Z,1528890003.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:03.760Z,1528890003.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:04.141Z,1528890004.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:04.158Z,1528890004.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:04.540Z,1528890004.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:04.558Z,1528890004.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:04.942Z,1528890004.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:04.960Z,1528890004.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:05.339Z,1528890005.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:05.357Z,1528890005.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:05.740Z,1528890005.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:05.758Z,1528890005.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:06.144Z,1528890006.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:06.162Z,1528890006.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:06.539Z,1528890006.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:06.557Z,1528890006.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:06.940Z,1528890006.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:06.958Z,1528890006.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:07.342Z,1528890007.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:07.360Z,1528890007.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:07.739Z,1528890007.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:07.764Z,1528890007.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:08.140Z,1528890008.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:08.158Z,1528890008.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:08.543Z,1528890008.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:08.560Z,1528890008.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:08.940Z,1528890008.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:08.964Z,1528890008.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:09.340Z,1528890009.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:09.358Z,1528890009.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:09.743Z,1528890009.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:09.761Z,1528890009.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:10.139Z,1528890010.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:10.164Z,1528890010.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:10.540Z,1528890010.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:10.558Z,1528890010.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:10.945Z,1528890010.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:10.962Z,1528890010.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:11.339Z,1528890011.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:11.357Z,1528890011.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:11.740Z,1528890011.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:11.758Z,1528890011.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:12.143Z,1528890012.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:12.161Z,1528890012.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:12.539Z,1528890012.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:12.557Z,1528890012.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:12.940Z,1528890012.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:12.959Z,1528890012.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:13.343Z,1528890013.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:13.361Z,1528890013.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:13.740Z,1528890013.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:13.764Z,1528890013.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:14.143Z,1528890014.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:14.161Z,1528890014.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:14.543Z,1528890014.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:14.568Z,1528890014.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:14.939Z,1528890014.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:14.964Z,1528890014.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:15.343Z,1528890015.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:15.362Z,1528890015.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:15.745Z,1528890015.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:15.762Z,1528890015.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:16.140Z,1528890016.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:16.157Z,1528890016.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:16.543Z,1528890016.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:16.562Z,1528890016.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:16.943Z,1528890016.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:16.961Z,1528890016.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:17.339Z,1528890017.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:17.357Z,1528890017.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:17.744Z,1528890017.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:17.762Z,1528890017.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:18.142Z,1528890018.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:18.160Z,1528890018.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:18.540Z,1528890018.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:18.557Z,1528890018.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:18.944Z,1528890018.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:18.962Z,1528890018.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:19.343Z,1528890019.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:19.361Z,1528890019.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:19.740Z,1528890019.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:19.774Z,1528890019.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:20.144Z,1528890020.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:20.162Z,1528890020.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:20.548Z,1528890020.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:20.565Z,1528890020.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:20.943Z,1528890020.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:20.960Z,1528890020.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:21.343Z,1528890021.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:21.361Z,1528890021.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:21.743Z,1528890021.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:21.761Z,1528890021.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:22.139Z,1528890022.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:22.157Z,1528890022.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:22.543Z,1528890022.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:22.566Z,1528890022.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:22.944Z,1528890022.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:22.961Z,1528890022.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:23.340Z,1528890023.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:23.357Z,1528890023.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:23.744Z,1528890023.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:23.762Z,1528890023.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:24.143Z,1528890024.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:24.161Z,1528890024.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:24.543Z,1528890024.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:24.562Z,1528890024.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:24.944Z,1528890024.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:24.962Z,1528890024.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:25.344Z,1528890025.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:25.362Z,1528890025.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:25.743Z,1528890025.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:25.761Z,1528890025.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:26.144Z,1528890026.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:26.162Z,1528890026.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:26.544Z,1528890026.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:26.561Z,1528890026.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:26.939Z,1528890026.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:26.957Z,1528890026.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:27.345Z,1528890027.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:27.363Z,1528890027.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:27.744Z,1528890027.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:27.762Z,1528890027.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:28.140Z,1528890028.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:28.157Z,1528890028.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:28.544Z,1528890028.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:28.562Z,1528890028.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:28.944Z,1528890028.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:28.968Z,1528890028.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:29.344Z,1528890029.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:29.362Z,1528890029.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:29.744Z,1528890029.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:29.762Z,1528890029.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:30.144Z,1528890030.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:30.162Z,1528890030.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:30.543Z,1528890030.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:30.560Z,1528890030.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:30.944Z,1528890030.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:30.962Z,1528890030.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:31.344Z,1528890031.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:31.362Z,1528890031.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:31.740Z,1528890031.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:31.757Z,1528890031.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:32.148Z,1528890032.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:32.167Z,1528890032.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:32.543Z,1528890032.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:32.565Z,1528890032.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:32.941Z,1528890032.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:32.958Z,1528890032.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:33.343Z,1528890033.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:33.366Z,1528890033.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:33.748Z,1528890033.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:33.766Z,1528890033.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:34.144Z,1528890034.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:34.162Z,1528890034.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:34.544Z,1528890034.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:34.562Z,1528890034.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:34.944Z,1528890034.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:34.963Z,1528890034.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:35.345Z,1528890035.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:35.363Z,1528890035.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:35.744Z,1528890035.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:35.763Z,1528890035.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:36.144Z,1528890036.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:36.168Z,1528890036.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:36.541Z,1528890036.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:36.558Z,1528890036.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:36.949Z,1528890036.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:36.967Z,1528890036.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:37.344Z,1528890037.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:37.362Z,1528890037.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:37.748Z,1528890037.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:37.766Z,1528890037.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:38.141Z,1528890038.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:38.159Z,1528890038.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:38.547Z,1528890038.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:38.570Z,1528890038.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:38.945Z,1528890038.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:38.964Z,1528890038.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:39.335Z,1528890039.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:39.370Z,1528890039.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:39.742Z,1528890039.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:39.766Z,1528890039.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:40.149Z,1528890040.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:40.172Z,1528890040.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:40.535Z,1528890040.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:40.572Z,1528890040.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:40.948Z,1528890040.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:40.967Z,1528890040.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:41.343Z,1528890041.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:41.362Z,1528890041.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:44.456Z,1528890044.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:44.474Z,1528890044.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:44.579Z,1528890044.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:44.626Z,1528890044.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:44.986Z,1528890044.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:45.019Z,1528890045.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:45.101Z,1528890045.101 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T11:40:45.101Z,1528890045.101 [NAL9602] No Fault, FailCount= 5
2018-06-13T11:40:45.366Z,1528890045.366 [NAL9602](INFO): Powering up NAL9602
2018-06-13T11:40:45.383Z,1528890045.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:45.428Z,1528890045.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:45.786Z,1528890045.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:45.825Z,1528890045.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:46.178Z,1528890046.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:46.196Z,1528890046.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:46.578Z,1528890046.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:46.596Z,1528890046.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:46.986Z,1528890046.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:47.030Z,1528890047.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:47.382Z,1528890047.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:47.404Z,1528890047.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:47.787Z,1528890047.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:47.806Z,1528890047.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:48.186Z,1528890048.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:48.205Z,1528890048.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:48.581Z,1528890048.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:48.600Z,1528890048.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:48.981Z,1528890048.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:48.000Z,1528890049.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:49.386Z,1528890049.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:49.404Z,1528890049.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:49.785Z,1528890049.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:49.804Z,1528890049.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:50.183Z,1528890050.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:50.206Z,1528890050.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:50.586Z,1528890050.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:50.605Z,1528890050.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:50.983Z,1528890050.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:51.002Z,1528890051.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:51.384Z,1528890051.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:51.404Z,1528890051.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:51.782Z,1528890051.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:51.813Z,1528890051.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:52.187Z,1528890052.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:52.206Z,1528890052.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:52.585Z,1528890052.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:52.604Z,1528890052.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:52.988Z,1528890052.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:53.007Z,1528890053.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:53.388Z,1528890053.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:53.407Z,1528890053.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:53.788Z,1528890053.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:53.807Z,1528890053.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:54.188Z,1528890054.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:54.207Z,1528890054.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:54.588Z,1528890054.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:54.606Z,1528890054.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:54.984Z,1528890054.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:55.003Z,1528890055.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:55.388Z,1528890055.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:55.407Z,1528890055.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:55.784Z,1528890055.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:55.803Z,1528890055.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:56.190Z,1528890056.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:56.215Z,1528890056.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:56.566Z,1528890056.566 [NAL9602](INFO): NAL9602 initialized
2018-06-13T11:40:56.592Z,1528890056.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:56.612Z,1528890056.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:56.989Z,1528890056.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:57.007Z,1528890057.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:57.394Z,1528890057.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:57.412Z,1528890057.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:57.798Z,1528890057.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:57.816Z,1528890057.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:58.198Z,1528890058.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:58.217Z,1528890058.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:58.588Z,1528890058.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:58.612Z,1528890058.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:58.988Z,1528890058.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:59.012Z,1528890059.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:59.389Z,1528890059.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:59.414Z,1528890059.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:40:59.783Z,1528890059.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:40:59.806Z,1528890059.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:00.194Z,1528890060.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:00.213Z,1528890060.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:00.598Z,1528890060.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:00.643Z,1528890060.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:00.994Z,1528890060.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:01.020Z,1528890061.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:01.387Z,1528890061.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:01.429Z,1528890061.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:01.790Z,1528890061.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:01.808Z,1528890061.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:02.183Z,1528890062.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:02.214Z,1528890062.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:02.594Z,1528890062.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:02.612Z,1528890062.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:02.987Z,1528890062.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:03.016Z,1528890063.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:03.400Z,1528890063.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:03.424Z,1528890063.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:03.801Z,1528890063.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:03.824Z,1528890063.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:04.204Z,1528890064.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:04.222Z,1528890064.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:04.588Z,1528890064.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:04.607Z,1528890064.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:04.987Z,1528890064.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:05.023Z,1528890065.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:05.390Z,1528890065.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:05.414Z,1528890065.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:05.793Z,1528890065.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:05.816Z,1528890065.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:06.199Z,1528890066.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:06.229Z,1528890066.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:06.605Z,1528890066.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:06.623Z,1528890066.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:06.995Z,1528890066.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:07.014Z,1528890067.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:07.393Z,1528890067.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:07.416Z,1528890067.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:07.783Z,1528890067.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:07.814Z,1528890067.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:08.183Z,1528890068.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:08.220Z,1528890068.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:08.584Z,1528890068.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:08.623Z,1528890068.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:08.987Z,1528890068.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:09.024Z,1528890069.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:09.400Z,1528890069.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:09.418Z,1528890069.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:09.800Z,1528890069.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:09.818Z,1528890069.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:10.205Z,1528890070.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:10.224Z,1528890070.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:10.588Z,1528890070.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:10.616Z,1528890070.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:10.984Z,1528890070.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:11.024Z,1528890071.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:11.384Z,1528890071.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:11.426Z,1528890071.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:11.779Z,1528890071.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:11.815Z,1528890071.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:12.204Z,1528890072.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:12.222Z,1528890072.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:12.608Z,1528890072.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:12.626Z,1528890072.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:13.001Z,1528890073.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:13.023Z,1528890073.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:13.383Z,1528890073.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:13.419Z,1528890073.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:13.787Z,1528890073.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:13.822Z,1528890073.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:14.184Z,1528890074.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:14.217Z,1528890074.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:14.587Z,1528890074.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:14.616Z,1528890074.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:14.983Z,1528890074.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:15.023Z,1528890075.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:15.409Z,1528890075.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:15.427Z,1528890075.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:15.805Z,1528890075.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:15.823Z,1528890075.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:16.210Z,1528890076.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:16.228Z,1528890076.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:16.583Z,1528890076.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:16.617Z,1528890076.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:16.985Z,1528890076.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:17.014Z,1528890077.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:17.387Z,1528890077.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:17.424Z,1528890077.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:17.788Z,1528890077.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:17.824Z,1528890077.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:18.198Z,1528890078.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:18.223Z,1528890078.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:18.602Z,1528890078.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:18.632Z,1528890078.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:18.990Z,1528890078.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:19.019Z,1528890079.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:19.387Z,1528890079.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:19.416Z,1528890079.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:19.783Z,1528890079.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:19.820Z,1528890079.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:20.186Z,1528890080.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:20.216Z,1528890080.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:20.588Z,1528890080.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:20.618Z,1528890080.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:20.987Z,1528890080.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:21.018Z,1528890081.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:21.406Z,1528890081.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:21.424Z,1528890081.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:21.804Z,1528890081.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:21.828Z,1528890081.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:22.206Z,1528890082.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:22.224Z,1528890082.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:22.589Z,1528890082.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:22.619Z,1528890082.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:22.988Z,1528890082.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:23.016Z,1528890083.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:23.387Z,1528890083.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:23.421Z,1528890083.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:23.786Z,1528890083.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:23.815Z,1528890083.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:24.206Z,1528890084.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:24.224Z,1528890084.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:24.602Z,1528890084.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:24.630Z,1528890084.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:25.004Z,1528890085.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:25.022Z,1528890085.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:25.389Z,1528890085.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:25.419Z,1528890085.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:25.786Z,1528890085.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:25.832Z,1528890085.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:26.183Z,1528890086.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:26.221Z,1528890086.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:26.584Z,1528890086.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:26.619Z,1528890086.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:26.985Z,1528890086.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:27.020Z,1528890087.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:27.405Z,1528890087.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:27.423Z,1528890087.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:27.807Z,1528890087.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:27.825Z,1528890087.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:28.203Z,1528890088.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:28.237Z,1528890088.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:28.580Z,1528890088.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:28.618Z,1528890088.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:28.985Z,1528890088.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:29.003Z,1528890089.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:29.385Z,1528890089.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:29.405Z,1528890089.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:29.786Z,1528890089.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:29.835Z,1528890089.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:30.200Z,1528890090.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:30.312Z,1528890090.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:30.598Z,1528890090.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:30.632Z,1528890090.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:30.994Z,1528890090.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:31.012Z,1528890091.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:31.388Z,1528890091.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:31.439Z,1528890091.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:31.792Z,1528890091.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:31.839Z,1528890091.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:32.194Z,1528890092.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:32.213Z,1528890092.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:32.593Z,1528890092.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:32.612Z,1528890092.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:32.989Z,1528890092.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:33.036Z,1528890093.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:33.396Z,1528890093.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:33.441Z,1528890093.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:33.799Z,1528890093.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:33.833Z,1528890093.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:34.199Z,1528890094.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:34.218Z,1528890094.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:34.588Z,1528890094.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:34.638Z,1528890094.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:34.988Z,1528890094.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:35.012Z,1528890095.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:35.390Z,1528890095.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:35.428Z,1528890095.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:35.788Z,1528890095.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:35.807Z,1528890095.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:36.194Z,1528890096.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:36.245Z,1528890096.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:36.602Z,1528890096.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:36.647Z,1528890096.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:36.997Z,1528890096.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:37.020Z,1528890097.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:37.388Z,1528890097.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:37.430Z,1528890097.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:37.790Z,1528890097.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:37.824Z,1528890097.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:38.189Z,1528890098.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:38.213Z,1528890098.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:38.588Z,1528890098.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:38.626Z,1528890098.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:38.992Z,1528890098.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:39.016Z,1528890099.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:39.400Z,1528890099.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:39.436Z,1528890099.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:39.807Z,1528890099.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:39.857Z,1528890099.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:40.209Z,1528890100.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:40.227Z,1528890100.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:40.580Z,1528890100.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:40.612Z,1528890100.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:40.987Z,1528890100.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:41.032Z,1528890101.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:41.384Z,1528890101.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:41.430Z,1528890101.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:44.506Z,1528890104.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:44.525Z,1528890104.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:44.657Z,1528890104.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:44.675Z,1528890104.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:45.054Z,1528890105.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:45.072Z,1528890105.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:45.456Z,1528890105.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:45.480Z,1528890105.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:45.834Z,1528890105.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:45.864Z,1528890105.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:46.235Z,1528890106.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:46.274Z,1528890106.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:46.636Z,1528890106.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:46.670Z,1528890106.670 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:46.670Z,1528890106.670 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 165
2018-06-13T11:41:46.670Z,1528890106.670 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:41:46.672Z,1528890106.672 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:46.672Z,1528890106.672 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 165
2018-06-13T11:41:46.672Z,1528890106.672 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:41:46.678Z,1528890106.678 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:46.678Z,1528890106.678 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 165
2018-06-13T11:41:46.678Z,1528890106.678 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:41:46.762Z,1528890106.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:41:46.762Z,1528890106.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:41:46.763Z,1528890106.763 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:41:47.034Z,1528890107.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:47.145Z,1528890107.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:41:47.145Z,1528890107.145 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 165
2018-06-13T11:41:47.146Z,1528890107.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:41:47.146Z,1528890107.146 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 165
2018-06-13T11:41:47.146Z,1528890107.146 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:41:47.146Z,1528890107.146 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 165
2018-06-13T11:41:47.449Z,1528890107.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:47.476Z,1528890107.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:41:47.476Z,1528890107.476 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:41:47.476Z,1528890107.476 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:41:47.477Z,1528890107.477 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:41:47.477Z,1528890107.477 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:41:47.478Z,1528890107.478 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:41:47.478Z,1528890107.478 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:41:47.478Z,1528890107.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:41:47.479Z,1528890107.479 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:41:47.853Z,1528890107.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:47.886Z,1528890107.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:41:47.887Z,1528890107.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:48.249Z,1528890108.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:48.283Z,1528890108.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:41:48.284Z,1528890108.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:48.638Z,1528890108.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:48.656Z,1528890108.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:41:48.657Z,1528890108.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:49.041Z,1528890109.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:49.059Z,1528890109.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:41:49.059Z,1528890109.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:49.442Z,1528890109.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:49.460Z,1528890109.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:41:49.461Z,1528890109.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:49.842Z,1528890109.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:49.860Z,1528890109.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:41:49.860Z,1528890109.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:50.241Z,1528890110.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:50.266Z,1528890110.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:41:50.267Z,1528890110.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:50.649Z,1528890110.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:50.667Z,1528890110.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:41:50.668Z,1528890110.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:51.049Z,1528890111.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:51.067Z,1528890111.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:41:51.068Z,1528890111.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:51.440Z,1528890111.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:51.458Z,1528890111.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:41:51.459Z,1528890111.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:51.840Z,1528890111.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:51.858Z,1528890111.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:41:51.859Z,1528890111.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:52.245Z,1528890112.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:52.263Z,1528890112.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:41:52.264Z,1528890112.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:52.643Z,1528890112.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:52.660Z,1528890112.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:41:52.661Z,1528890112.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:53.041Z,1528890113.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:53.058Z,1528890113.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:41:53.059Z,1528890113.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:53.449Z,1528890113.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:53.467Z,1528890113.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:41:53.468Z,1528890113.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:53.850Z,1528890113.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:53.868Z,1528890113.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:41:53.869Z,1528890113.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:54.249Z,1528890114.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:54.267Z,1528890114.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:41:54.268Z,1528890114.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:54.644Z,1528890114.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:54.662Z,1528890114.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:41:54.663Z,1528890114.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:55.037Z,1528890115.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:55.055Z,1528890115.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:41:55.056Z,1528890115.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:55.435Z,1528890115.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:55.473Z,1528890115.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:41:55.474Z,1528890115.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:55.846Z,1528890115.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:55.864Z,1528890115.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:41:55.865Z,1528890115.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:56.249Z,1528890116.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:56.267Z,1528890116.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:41:56.268Z,1528890116.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:56.646Z,1528890116.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:56.672Z,1528890116.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:41:56.673Z,1528890116.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:57.052Z,1528890117.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:57.070Z,1528890117.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:41:57.070Z,1528890117.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:57.442Z,1528890117.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:57.459Z,1528890117.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:41:57.460Z,1528890117.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:57.844Z,1528890117.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:57.861Z,1528890117.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:41:57.862Z,1528890117.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:58.240Z,1528890118.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:58.257Z,1528890118.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:41:58.258Z,1528890118.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:58.642Z,1528890118.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:58.661Z,1528890118.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:41:58.662Z,1528890118.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:59.037Z,1528890119.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:59.063Z,1528890119.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:41:59.063Z,1528890119.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:59.453Z,1528890119.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:59.471Z,1528890119.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:41:59.471Z,1528890119.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:41:59.852Z,1528890119.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:41:59.876Z,1528890119.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:41:59.877Z,1528890119.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:00.253Z,1528890120.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:00.270Z,1528890120.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:42:00.271Z,1528890120.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:00.641Z,1528890120.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:00.665Z,1528890120.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:42:00.666Z,1528890120.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:01.041Z,1528890121.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:01.059Z,1528890121.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:42:01.060Z,1528890121.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:01.431Z,1528890121.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:01.464Z,1528890121.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:42:01.465Z,1528890121.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:01.831Z,1528890121.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:01.876Z,1528890121.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:42:01.876Z,1528890121.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:02.252Z,1528890122.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:02.270Z,1528890122.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:42:02.271Z,1528890122.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:02.650Z,1528890122.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:02.684Z,1528890122.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:42:02.685Z,1528890122.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:03.052Z,1528890123.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:03.071Z,1528890123.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:42:03.072Z,1528890123.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:03.431Z,1528890123.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:03.464Z,1528890123.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:42:03.466Z,1528890123.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:03.831Z,1528890123.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:03.862Z,1528890123.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:42:03.863Z,1528890123.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:04.235Z,1528890124.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:04.266Z,1528890124.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:42:04.267Z,1528890124.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:04.631Z,1528890124.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:04.667Z,1528890124.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:42:04.668Z,1528890124.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:05.031Z,1528890125.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:05.068Z,1528890125.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:42:05.070Z,1528890125.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:05.457Z,1528890125.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:05.475Z,1528890125.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:42:05.476Z,1528890125.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:05.847Z,1528890125.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:05.871Z,1528890125.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:42:05.872Z,1528890125.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:06.250Z,1528890126.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:06.275Z,1528890126.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:42:06.276Z,1528890126.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:06.632Z,1528890126.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:06.672Z,1528890126.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:07.028Z,1528890127.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:07.066Z,1528890127.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:07.434Z,1528890127.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:07.470Z,1528890127.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:07.834Z,1528890127.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:07.873Z,1528890127.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:08.242Z,1528890128.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:08.284Z,1528890128.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:08.648Z,1528890128.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:08.679Z,1528890128.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:09.047Z,1528890129.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:09.086Z,1528890129.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:09.432Z,1528890129.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:09.451Z,1528890129.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:09.835Z,1528890129.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:09.883Z,1528890129.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:10.231Z,1528890130.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:10.255Z,1528890130.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:10.631Z,1528890130.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:10.653Z,1528890130.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:11.038Z,1528890131.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:11.056Z,1528890131.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:11.445Z,1528890131.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:11.488Z,1528890131.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:11.841Z,1528890131.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:11.872Z,1528890131.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:12.243Z,1528890132.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:12.262Z,1528890132.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:12.636Z,1528890132.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:12.654Z,1528890132.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:13.031Z,1528890133.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:13.082Z,1528890133.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:13.437Z,1528890133.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:13.460Z,1528890133.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:13.837Z,1528890133.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:13.860Z,1528890133.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:14.240Z,1528890134.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:14.258Z,1528890134.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:14.645Z,1528890134.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:14.691Z,1528890134.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:15.045Z,1528890135.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:15.088Z,1528890135.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:15.431Z,1528890135.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:15.460Z,1528890135.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:15.841Z,1528890135.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:15.859Z,1528890135.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:16.237Z,1528890136.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:16.288Z,1528890136.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:16.638Z,1528890136.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:16.659Z,1528890136.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:17.036Z,1528890137.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:17.059Z,1528890137.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:17.444Z,1528890137.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:17.462Z,1528890137.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:17.842Z,1528890137.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:17.886Z,1528890137.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:18.249Z,1528890138.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:18.288Z,1528890138.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:18.639Z,1528890138.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:18.661Z,1528890138.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:19.031Z,1528890139.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:19.067Z,1528890139.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:19.438Z,1528890139.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:19.491Z,1528890139.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:19.838Z,1528890139.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:19.856Z,1528890139.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:20.242Z,1528890140.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:20.265Z,1528890140.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:20.648Z,1528890140.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:20.667Z,1528890140.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:21.043Z,1528890141.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:21.070Z,1528890141.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:21.438Z,1528890141.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:21.455Z,1528890141.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:21.837Z,1528890141.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:21.860Z,1528890141.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:22.234Z,1528890142.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:22.260Z,1528890142.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:22.638Z,1528890142.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:22.656Z,1528890142.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:23.035Z,1528890143.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:23.070Z,1528890143.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:23.445Z,1528890143.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:23.468Z,1528890143.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:23.847Z,1528890143.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:23.868Z,1528890143.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:24.246Z,1528890144.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:24.295Z,1528890144.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:24.634Z,1528890144.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:24.653Z,1528890144.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:25.037Z,1528890145.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:25.055Z,1528890145.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:25.442Z,1528890145.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:25.464Z,1528890145.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:25.838Z,1528890145.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:25.855Z,1528890145.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:26.245Z,1528890146.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:26.270Z,1528890146.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:26.646Z,1528890146.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:26.673Z,1528890146.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:27.047Z,1528890147.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:27.069Z,1528890147.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:27.438Z,1528890147.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:27.460Z,1528890147.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:27.835Z,1528890147.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:27.858Z,1528890147.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:28.243Z,1528890148.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:28.261Z,1528890148.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:28.638Z,1528890148.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:28.662Z,1528890148.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:29.035Z,1528890149.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:29.058Z,1528890149.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:29.448Z,1528890149.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:29.472Z,1528890149.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:29.846Z,1528890149.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:29.866Z,1528890149.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:30.247Z,1528890150.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:30.270Z,1528890150.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:30.638Z,1528890150.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:30.664Z,1528890150.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:31.037Z,1528890151.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:31.055Z,1528890151.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:31.435Z,1528890151.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:31.458Z,1528890151.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:31.834Z,1528890151.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:31.856Z,1528890151.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:32.247Z,1528890152.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:32.265Z,1528890152.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:32.651Z,1528890152.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:32.668Z,1528890152.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:33.051Z,1528890153.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:33.071Z,1528890153.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:33.438Z,1528890153.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:33.456Z,1528890153.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:33.835Z,1528890153.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:33.869Z,1528890153.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:34.231Z,1528890154.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:34.266Z,1528890154.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:34.632Z,1528890154.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:34.660Z,1528890154.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:35.031Z,1528890155.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:35.066Z,1528890155.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:35.453Z,1528890155.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:35.471Z,1528890155.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:35.851Z,1528890155.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:35.873Z,1528890155.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:36.248Z,1528890156.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:36.267Z,1528890156.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:36.635Z,1528890156.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:36.666Z,1528890156.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:37.032Z,1528890157.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:37.062Z,1528890157.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:37.432Z,1528890157.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:37.462Z,1528890157.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:37.832Z,1528890157.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:37.865Z,1528890157.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:38.256Z,1528890158.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:38.280Z,1528890158.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:38.650Z,1528890158.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:38.673Z,1528890158.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:39.055Z,1528890159.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:39.072Z,1528890159.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:39.431Z,1528890159.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:39.468Z,1528890159.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:39.831Z,1528890159.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:39.868Z,1528890159.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:40.231Z,1528890160.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:40.268Z,1528890160.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:40.632Z,1528890160.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:40.675Z,1528890160.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:41.035Z,1528890161.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:41.063Z,1528890161.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:41.456Z,1528890161.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:41.480Z,1528890161.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:44.561Z,1528890164.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:44.580Z,1528890164.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:44.584Z,1528890164.584 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T11:37:41.6Z
2018-06-13T11:42:44.584Z,1528890164.584 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T11:42:44.584Z,1528890164.584 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T11:42:44.719Z,1528890164.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:44.737Z,1528890164.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:45.858Z,1528890165.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:45.875Z,1528890165.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:45.976Z,1528890165.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:46.010Z,1528890166.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:46.394Z,1528890166.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:46.425Z,1528890166.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:46.805Z,1528890166.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:46.823Z,1528890166.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:47.190Z,1528890167.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:47.218Z,1528890167.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:47.583Z,1528890167.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:47.621Z,1528890167.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:47.983Z,1528890167.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:48.017Z,1528890168.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:51.086Z,1528890171.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:51.128Z,1528890171.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:51.222Z,1528890171.222 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0192.lzma
2018-06-13T11:42:51.247Z,1528890171.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:51.288Z,1528890171.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:51.658Z,1528890171.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:51.691Z,1528890171.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:52.024Z,1528890172.024 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0192.lzma.bak
2018-06-13T11:42:52.024Z,1528890172.024 [DataOverHttps](INFO): SBD MOMSN=8329159
2018-06-13T11:42:52.079Z,1528890172.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:52.096Z,1528890172.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:53.953Z,1528890173.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:53.990Z,1528890173.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:54.103Z,1528890174.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:54.144Z,1528890174.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:54.503Z,1528890174.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:54.541Z,1528890174.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:57.611Z,1528890177.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:57.641Z,1528890177.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:57.778Z,1528890177.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:57.812Z,1528890177.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:58.178Z,1528890178.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:58.196Z,1528890178.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:58.580Z,1528890178.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:58.604Z,1528890178.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:58.960Z,1528890178.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:59.002Z,1528890179.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:59.359Z,1528890179.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:59.396Z,1528890179.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:42:59.755Z,1528890179.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:42:59.793Z,1528890179.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:00.159Z,1528890180.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:00.196Z,1528890180.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:00.576Z,1528890180.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:00.594Z,1528890180.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:05.205Z,1528890185.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:05.246Z,1528890185.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:05.333Z,1528890185.333 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0193.lzma
2018-06-13T11:43:05.365Z,1528890185.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:05.411Z,1528890185.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:05.759Z,1528890185.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:05.791Z,1528890185.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:06.134Z,1528890186.134 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0193.lzma.bak
2018-06-13T11:43:06.134Z,1528890186.134 [DataOverHttps](INFO): SBD MOMSN=8329162
2018-06-13T11:43:06.164Z,1528890186.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:06.201Z,1528890186.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:08.032Z,1528890188.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:08.051Z,1528890188.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:08.054Z,1528890188.054 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T11:43:08.054Z,1528890188.054 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T11:43:08.054Z,1528890188.054 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T11:43:08.155Z,1528890188.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:08.197Z,1528890188.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:08.585Z,1528890188.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:08.604Z,1528890188.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:11.687Z,1528890191.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:11.712Z,1528890191.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:11.850Z,1528890191.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:11.895Z,1528890191.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:12.243Z,1528890192.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:12.273Z,1528890192.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:12.639Z,1528890192.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:12.671Z,1528890192.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:13.039Z,1528890193.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:13.073Z,1528890193.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:13.456Z,1528890193.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:13.475Z,1528890193.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:13.853Z,1528890193.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:13.871Z,1528890193.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:14.251Z,1528890194.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:14.269Z,1528890194.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:14.635Z,1528890194.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:14.674Z,1528890194.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:15.035Z,1528890195.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:15.063Z,1528890195.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:15.435Z,1528890195.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:15.462Z,1528890195.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:15.839Z,1528890195.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:15.870Z,1528890195.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:16.256Z,1528890196.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:16.274Z,1528890196.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:16.656Z,1528890196.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:16.674Z,1528890196.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:17.057Z,1528890197.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:17.075Z,1528890197.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:17.435Z,1528890197.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:17.463Z,1528890197.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:17.835Z,1528890197.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:17.870Z,1528890197.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:18.261Z,1528890198.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:18.280Z,1528890198.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:18.650Z,1528890198.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:18.674Z,1528890198.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:19.053Z,1528890199.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:19.070Z,1528890199.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:19.436Z,1528890199.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:19.469Z,1528890199.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:19.835Z,1528890199.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:19.868Z,1528890199.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:20.252Z,1528890200.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:20.276Z,1528890200.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:20.658Z,1528890200.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:20.684Z,1528890200.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:21.052Z,1528890201.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:21.072Z,1528890201.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:21.436Z,1528890201.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:21.472Z,1528890201.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:21.835Z,1528890201.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:21.881Z,1528890201.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:22.246Z,1528890202.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:22.274Z,1528890202.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:22.657Z,1528890202.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:22.675Z,1528890202.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:23.045Z,1528890203.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:23.087Z,1528890203.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:23.436Z,1528890203.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:23.470Z,1528890203.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:23.835Z,1528890203.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:23.869Z,1528890203.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:24.245Z,1528890204.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:24.284Z,1528890204.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:24.653Z,1528890204.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:24.679Z,1528890204.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:25.057Z,1528890205.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:25.083Z,1528890205.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:25.441Z,1528890205.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:25.459Z,1528890205.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:25.837Z,1528890205.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:25.855Z,1528890205.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:26.250Z,1528890206.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:26.280Z,1528890206.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:26.650Z,1528890206.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:26.668Z,1528890206.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:27.042Z,1528890207.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:27.068Z,1528890207.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:27.440Z,1528890207.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:27.471Z,1528890207.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:27.842Z,1528890207.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:27.860Z,1528890207.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:28.247Z,1528890208.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:28.265Z,1528890208.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:28.646Z,1528890208.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:28.669Z,1528890208.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:29.047Z,1528890209.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:29.064Z,1528890209.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:29.442Z,1528890209.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:29.461Z,1528890209.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:29.839Z,1528890209.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:29.870Z,1528890209.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:30.249Z,1528890210.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:30.267Z,1528890210.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:30.651Z,1528890210.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:30.669Z,1528890210.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:31.051Z,1528890211.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:31.069Z,1528890211.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:31.443Z,1528890211.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:31.460Z,1528890211.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:31.831Z,1528890211.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:31.868Z,1528890211.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:32.250Z,1528890212.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:32.282Z,1528890212.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:32.656Z,1528890212.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:32.673Z,1528890212.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:33.048Z,1528890213.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:33.072Z,1528890213.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:33.435Z,1528890213.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:33.469Z,1528890213.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:33.832Z,1528890213.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:33.870Z,1528890213.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:34.235Z,1528890214.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:34.268Z,1528890214.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:34.652Z,1528890214.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:34.670Z,1528890214.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:35.056Z,1528890215.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:35.074Z,1528890215.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:35.441Z,1528890215.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:35.475Z,1528890215.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:35.835Z,1528890215.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:35.871Z,1528890215.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:36.231Z,1528890216.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:36.265Z,1528890216.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:36.632Z,1528890216.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:36.686Z,1528890216.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:37.047Z,1528890217.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:37.198Z,1528890217.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:37.446Z,1528890217.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:37.510Z,1528890217.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:37.854Z,1528890217.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:37.905Z,1528890217.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:38.246Z,1528890218.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:38.272Z,1528890218.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:38.639Z,1528890218.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:38.656Z,1528890218.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:39.035Z,1528890219.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:39.054Z,1528890219.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:39.439Z,1528890219.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:39.457Z,1528890219.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:39.839Z,1528890219.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:39.857Z,1528890219.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:40.238Z,1528890220.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:40.256Z,1528890220.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:40.649Z,1528890220.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:40.682Z,1528890220.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:41.045Z,1528890221.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:41.087Z,1528890221.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:41.450Z,1528890221.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:41.482Z,1528890221.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:41.839Z,1528890221.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:41.884Z,1528890221.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:42.238Z,1528890222.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:42.256Z,1528890222.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:42.644Z,1528890222.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:42.729Z,1528890222.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:43.038Z,1528890223.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:43.060Z,1528890223.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:43.449Z,1528890223.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:43.490Z,1528890223.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:43.849Z,1528890223.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:43.883Z,1528890223.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:44.249Z,1528890224.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:44.267Z,1528890224.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:44.638Z,1528890224.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:44.660Z,1528890224.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:45.038Z,1528890225.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:45.056Z,1528890225.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:45.438Z,1528890225.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:45.456Z,1528890225.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:45.838Z,1528890225.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:45.856Z,1528890225.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:46.237Z,1528890226.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:46.255Z,1528890226.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:46.649Z,1528890226.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:46.667Z,1528890226.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:47.049Z,1528890227.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:47.066Z,1528890227.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:47.446Z,1528890227.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:47.463Z,1528890227.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:47.840Z,1528890227.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:47.858Z,1528890227.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:48.242Z,1528890228.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:48.259Z,1528890228.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:48.642Z,1528890228.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:48.660Z,1528890228.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:49.034Z,1528890229.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:49.052Z,1528890229.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:49.453Z,1528890229.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:49.488Z,1528890229.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:49.849Z,1528890229.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:49.882Z,1528890229.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:50.253Z,1528890230.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:50.280Z,1528890230.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:50.640Z,1528890230.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:50.658Z,1528890230.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:51.035Z,1528890231.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:51.053Z,1528890231.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:51.439Z,1528890231.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:51.457Z,1528890231.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:51.840Z,1528890231.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:51.857Z,1528890231.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:52.239Z,1528890232.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:52.284Z,1528890232.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:52.650Z,1528890232.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:52.682Z,1528890232.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:53.053Z,1528890233.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:53.080Z,1528890233.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:53.453Z,1528890233.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:53.479Z,1528890233.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:53.838Z,1528890233.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:53.856Z,1528890233.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:54.253Z,1528890234.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:54.286Z,1528890234.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:54.640Z,1528890234.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:54.658Z,1528890234.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:55.038Z,1528890235.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:55.056Z,1528890235.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:55.449Z,1528890235.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:55.489Z,1528890235.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:55.853Z,1528890235.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:55.886Z,1528890235.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:56.249Z,1528890236.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:56.283Z,1528890236.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:56.639Z,1528890236.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:56.664Z,1528890236.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:57.039Z,1528890237.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:57.064Z,1528890237.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:57.440Z,1528890237.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:57.458Z,1528890237.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:57.839Z,1528890237.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:57.857Z,1528890237.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:58.243Z,1528890238.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:58.268Z,1528890238.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:58.645Z,1528890238.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:58.664Z,1528890238.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:59.049Z,1528890239.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:59.072Z,1528890239.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:59.450Z,1528890239.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:59.468Z,1528890239.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:43:59.842Z,1528890239.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:43:59.859Z,1528890239.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:00.245Z,1528890240.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:00.268Z,1528890240.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:00.642Z,1528890240.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:00.660Z,1528890240.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:01.041Z,1528890241.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:01.059Z,1528890241.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:01.449Z,1528890241.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:01.467Z,1528890241.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:01.849Z,1528890241.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:01.867Z,1528890241.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:02.254Z,1528890242.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:02.297Z,1528890242.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:02.640Z,1528890242.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:02.678Z,1528890242.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:03.034Z,1528890243.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:03.068Z,1528890243.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:03.439Z,1528890243.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:03.471Z,1528890243.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:03.841Z,1528890243.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:03.875Z,1528890243.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:04.236Z,1528890244.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:04.260Z,1528890244.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:04.647Z,1528890244.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:04.665Z,1528890244.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:05.050Z,1528890245.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:05.060Z,1528890245.060 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T11:44:05.060Z,1528890245.060 [BPC1] Communications Fault, FailCount= 7
2018-06-13T11:44:05.060Z,1528890245.060 [BPC1](ERROR): Communications Fault
2018-06-13T11:44:05.070Z,1528890245.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:05.161Z,1528890245.161 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T11:44:05.448Z,1528890245.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:05.472Z,1528890245.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:05.839Z,1528890245.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:05.879Z,1528890245.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:06.231Z,1528890246.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:06.272Z,1528890246.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:06.357Z,1528890246.357 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T11:44:06.357Z,1528890246.357 [BPC1] No Fault, FailCount= 7
2018-06-13T11:44:06.632Z,1528890246.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:06.716Z,1528890246.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:07.036Z,1528890247.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:07.070Z,1528890247.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:07.457Z,1528890247.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:07.475Z,1528890247.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:07.855Z,1528890247.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:07.874Z,1528890247.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:08.260Z,1528890248.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:08.281Z,1528890248.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:08.640Z,1528890248.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:08.669Z,1528890248.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:09.039Z,1528890249.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:09.068Z,1528890249.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:09.439Z,1528890249.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:09.466Z,1528890249.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:09.840Z,1528890249.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:09.870Z,1528890249.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:12.963Z,1528890252.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:12.981Z,1528890252.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:13.113Z,1528890253.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:13.162Z,1528890253.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:13.508Z,1528890253.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:13.527Z,1528890253.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:13.908Z,1528890253.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:13.926Z,1528890253.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:14.287Z,1528890254.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:14.314Z,1528890254.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:14.688Z,1528890254.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:14.724Z,1528890254.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:15.083Z,1528890255.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:15.116Z,1528890255.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:15.503Z,1528890255.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:15.520Z,1528890255.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:15.908Z,1528890255.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:15.927Z,1528890255.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:16.299Z,1528890256.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:16.317Z,1528890256.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:16.687Z,1528890256.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:16.720Z,1528890256.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:17.087Z,1528890257.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:17.116Z,1528890257.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:17.487Z,1528890257.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:17.514Z,1528890257.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:17.888Z,1528890257.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:17.923Z,1528890257.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:18.287Z,1528890258.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:18.322Z,1528890258.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:18.697Z,1528890258.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:18.733Z,1528890258.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:19.108Z,1528890259.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:19.128Z,1528890259.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:19.508Z,1528890259.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:19.526Z,1528890259.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:19.883Z,1528890259.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:19.900Z,1528890259.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:20.287Z,1528890260.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:20.304Z,1528890260.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:20.689Z,1528890260.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:20.707Z,1528890260.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:21.087Z,1528890261.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:21.105Z,1528890261.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:21.501Z,1528890261.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:21.535Z,1528890261.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:21.901Z,1528890261.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:21.947Z,1528890261.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:22.294Z,1528890262.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:22.316Z,1528890262.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:22.691Z,1528890262.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:22.709Z,1528890262.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:23.093Z,1528890263.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:23.116Z,1528890263.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:23.486Z,1528890263.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:23.516Z,1528890263.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:23.892Z,1528890263.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:23.912Z,1528890263.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:24.293Z,1528890264.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:24.311Z,1528890264.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:24.698Z,1528890264.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:24.716Z,1528890264.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:25.101Z,1528890265.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:25.119Z,1528890265.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:25.501Z,1528890265.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:25.519Z,1528890265.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:25.887Z,1528890265.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:25.909Z,1528890265.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:26.292Z,1528890266.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:26.310Z,1528890266.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:26.693Z,1528890266.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:26.716Z,1528890266.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:27.092Z,1528890267.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:27.110Z,1528890267.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:27.498Z,1528890267.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:27.516Z,1528890267.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:27.901Z,1528890267.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:27.919Z,1528890267.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:28.293Z,1528890268.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:28.311Z,1528890268.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:28.692Z,1528890268.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:28.709Z,1528890268.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:29.093Z,1528890269.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:29.111Z,1528890269.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:29.492Z,1528890269.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:29.513Z,1528890269.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:29.892Z,1528890269.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:29.910Z,1528890269.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:30.294Z,1528890270.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:30.312Z,1528890270.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:30.694Z,1528890270.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:30.712Z,1528890270.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:31.101Z,1528890271.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:31.119Z,1528890271.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:31.502Z,1528890271.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:31.519Z,1528890271.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:31.893Z,1528890271.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:31.911Z,1528890271.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:32.294Z,1528890272.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:32.312Z,1528890272.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:32.695Z,1528890272.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:32.713Z,1528890272.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:33.087Z,1528890273.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:33.110Z,1528890273.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:33.498Z,1528890273.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:33.520Z,1528890273.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:33.901Z,1528890273.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:33.919Z,1528890273.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:34.299Z,1528890274.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:34.316Z,1528890274.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:34.691Z,1528890274.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:34.713Z,1528890274.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:35.094Z,1528890275.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:35.112Z,1528890275.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:35.487Z,1528890275.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:35.510Z,1528890275.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:35.891Z,1528890275.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:35.923Z,1528890275.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:36.294Z,1528890276.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:36.312Z,1528890276.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:36.698Z,1528890276.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:36.716Z,1528890276.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:37.101Z,1528890277.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:37.119Z,1528890277.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:37.501Z,1528890277.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:37.519Z,1528890277.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:37.887Z,1528890277.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:37.910Z,1528890277.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:38.287Z,1528890278.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:38.310Z,1528890278.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:38.692Z,1528890278.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:38.723Z,1528890278.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:39.095Z,1528890279.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:39.112Z,1528890279.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:39.503Z,1528890279.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:39.521Z,1528890279.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:39.904Z,1528890279.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:39.922Z,1528890279.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:40.299Z,1528890280.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:40.317Z,1528890280.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:40.691Z,1528890280.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:40.720Z,1528890280.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:41.094Z,1528890281.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:41.113Z,1528890281.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:41.493Z,1528890281.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:41.511Z,1528890281.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:41.898Z,1528890281.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:41.916Z,1528890281.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:42.291Z,1528890282.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:42.316Z,1528890282.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:42.699Z,1528890282.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:42.718Z,1528890282.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:43.106Z,1528890283.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:43.124Z,1528890283.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:43.507Z,1528890283.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:43.526Z,1528890283.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:43.894Z,1528890283.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:43.916Z,1528890283.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:44.292Z,1528890284.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:44.310Z,1528890284.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:44.695Z,1528890284.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:44.713Z,1528890284.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:45.083Z,1528890285.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:45.120Z,1528890285.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:45.503Z,1528890285.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:45.521Z,1528890285.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:45.908Z,1528890285.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:45.927Z,1528890285.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:46.304Z,1528890286.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:46.328Z,1528890286.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:46.698Z,1528890286.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:46.720Z,1528890286.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:47.091Z,1528890287.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:47.117Z,1528890287.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:47.484Z,1528890287.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:47.516Z,1528890287.516 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:47.516Z,1528890287.516 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 166
2018-06-13T11:44:47.516Z,1528890287.516 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:44:47.518Z,1528890287.518 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:47.518Z,1528890287.518 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 166
2018-06-13T11:44:47.519Z,1528890287.519 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:44:47.520Z,1528890287.520 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:47.520Z,1528890287.520 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 166
2018-06-13T11:44:47.520Z,1528890287.520 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:44:47.597Z,1528890287.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:44:47.597Z,1528890287.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:44:47.598Z,1528890287.598 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:44:47.888Z,1528890287.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:48.001Z,1528890288.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:44:48.001Z,1528890288.001 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 166
2018-06-13T11:44:48.002Z,1528890288.002 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:44:48.002Z,1528890288.002 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 166
2018-06-13T11:44:48.002Z,1528890288.002 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:44:48.002Z,1528890288.002 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 166
2018-06-13T11:44:48.284Z,1528890288.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:48.321Z,1528890288.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:44:48.321Z,1528890288.321 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:44:48.322Z,1528890288.322 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:44:48.322Z,1528890288.322 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:44:48.322Z,1528890288.322 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:44:48.323Z,1528890288.323 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:44:48.323Z,1528890288.323 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:44:48.323Z,1528890288.323 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:44:48.324Z,1528890288.324 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:44:48.698Z,1528890288.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:48.723Z,1528890288.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:44:48.724Z,1528890288.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:49.108Z,1528890289.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:49.126Z,1528890289.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:44:49.127Z,1528890289.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:49.509Z,1528890289.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:49.527Z,1528890289.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:44:49.528Z,1528890289.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:49.883Z,1528890289.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:49.921Z,1528890289.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:44:49.922Z,1528890289.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:50.287Z,1528890290.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:50.323Z,1528890290.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:44:50.324Z,1528890290.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:50.689Z,1528890290.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:50.730Z,1528890290.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:44:50.731Z,1528890290.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:51.087Z,1528890291.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:51.114Z,1528890291.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:44:51.115Z,1528890291.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:51.504Z,1528890291.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:51.522Z,1528890291.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:44:51.523Z,1528890291.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:51.908Z,1528890291.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:51.927Z,1528890291.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:44:51.927Z,1528890291.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:52.300Z,1528890292.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:52.317Z,1528890292.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:44:52.318Z,1528890292.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:52.687Z,1528890292.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:52.715Z,1528890292.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:44:52.716Z,1528890292.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:53.087Z,1528890293.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:53.121Z,1528890293.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:44:53.122Z,1528890293.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:53.487Z,1528890293.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:53.524Z,1528890293.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:44:53.525Z,1528890293.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:53.888Z,1528890293.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:53.919Z,1528890293.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:44:53.919Z,1528890293.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:54.287Z,1528890294.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:54.320Z,1528890294.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:44:54.321Z,1528890294.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:54.704Z,1528890294.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:54.722Z,1528890294.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:44:54.723Z,1528890294.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:55.106Z,1528890295.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:55.123Z,1528890295.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:44:55.124Z,1528890295.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:55.506Z,1528890295.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:55.535Z,1528890295.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:44:55.536Z,1528890295.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:55.887Z,1528890295.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:55.923Z,1528890295.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:44:55.924Z,1528890295.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:56.287Z,1528890296.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:56.320Z,1528890296.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:44:56.321Z,1528890296.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:56.688Z,1528890296.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:56.728Z,1528890296.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:44:56.729Z,1528890296.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:57.083Z,1528890297.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:57.128Z,1528890297.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:44:57.129Z,1528890297.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:57.498Z,1528890297.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:57.531Z,1528890297.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:44:57.532Z,1528890297.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:57.901Z,1528890297.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:57.929Z,1528890297.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:44:57.930Z,1528890297.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:58.297Z,1528890298.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:58.331Z,1528890298.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:44:58.332Z,1528890298.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:58.687Z,1528890298.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:58.704Z,1528890298.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:44:58.705Z,1528890298.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:59.091Z,1528890299.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:59.109Z,1528890299.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:44:59.110Z,1528890299.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:59.486Z,1528890299.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:59.503Z,1528890299.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:44:59.504Z,1528890299.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:44:59.890Z,1528890299.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:44:59.912Z,1528890299.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:44:59.913Z,1528890299.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:00.294Z,1528890300.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:00.312Z,1528890300.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:45:00.313Z,1528890300.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:00.702Z,1528890300.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:00.739Z,1528890300.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:45:00.740Z,1528890300.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:01.100Z,1528890301.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:01.117Z,1528890301.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:45:01.118Z,1528890301.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:01.501Z,1528890301.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:01.524Z,1528890301.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:45:01.541Z,1528890301.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:01.893Z,1528890301.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:01.910Z,1528890301.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:45:01.911Z,1528890301.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:02.291Z,1528890302.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:02.325Z,1528890302.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:45:02.326Z,1528890302.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:02.694Z,1528890302.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:02.712Z,1528890302.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:45:02.713Z,1528890302.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:03.093Z,1528890303.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:03.116Z,1528890303.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:45:03.117Z,1528890303.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:03.502Z,1528890303.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:03.519Z,1528890303.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:45:03.520Z,1528890303.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:03.902Z,1528890303.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:03.920Z,1528890303.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:45:03.921Z,1528890303.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:04.300Z,1528890304.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:04.317Z,1528890304.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:45:04.318Z,1528890304.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:04.691Z,1528890304.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:04.713Z,1528890304.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:45:04.714Z,1528890304.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:05.094Z,1528890305.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:05.111Z,1528890305.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:45:05.112Z,1528890305.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:05.493Z,1528890305.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:05.510Z,1528890305.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:45:05.511Z,1528890305.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:05.891Z,1528890305.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:05.916Z,1528890305.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:45:05.921Z,1528890305.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:06.294Z,1528890306.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:06.311Z,1528890306.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:45:06.312Z,1528890306.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:06.699Z,1528890306.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:06.717Z,1528890306.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:45:06.718Z,1528890306.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:07.107Z,1528890307.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:07.163Z,1528890307.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:45:07.164Z,1528890307.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:07.507Z,1528890307.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:07.526Z,1528890307.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:07.893Z,1528890307.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:07.911Z,1528890307.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:08.292Z,1528890308.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:08.311Z,1528890308.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:08.698Z,1528890308.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:08.716Z,1528890308.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:11.814Z,1528890311.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:11.832Z,1528890311.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:11.977Z,1528890311.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:12.006Z,1528890312.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:12.378Z,1528890312.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:12.411Z,1528890312.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:12.773Z,1528890312.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:12.821Z,1528890312.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:13.161Z,1528890313.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:13.212Z,1528890313.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:13.565Z,1528890313.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:13.583Z,1528890313.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:13.962Z,1528890313.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:13.979Z,1528890313.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:14.363Z,1528890314.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:14.382Z,1528890314.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:14.773Z,1528890314.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:14.796Z,1528890314.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:15.173Z,1528890315.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:15.191Z,1528890315.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:15.570Z,1528890315.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:15.592Z,1528890315.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:15.966Z,1528890315.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:15.984Z,1528890315.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:16.365Z,1528890316.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:16.383Z,1528890316.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:16.763Z,1528890316.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:16.794Z,1528890316.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:17.164Z,1528890317.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:17.196Z,1528890317.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:17.570Z,1528890317.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:17.592Z,1528890317.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:17.973Z,1528890317.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:17.991Z,1528890317.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:18.374Z,1528890318.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:18.391Z,1528890318.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:18.766Z,1528890318.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:18.783Z,1528890318.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:19.163Z,1528890319.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:19.186Z,1528890319.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:19.563Z,1528890319.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:19.593Z,1528890319.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:19.966Z,1528890319.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:19.984Z,1528890319.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:20.363Z,1528890320.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:20.386Z,1528890320.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:20.774Z,1528890320.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:20.793Z,1528890320.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:21.173Z,1528890321.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:21.197Z,1528890321.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:21.574Z,1528890321.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:21.592Z,1528890321.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:21.967Z,1528890321.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:21.985Z,1528890321.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:22.365Z,1528890322.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:22.388Z,1528890322.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:22.770Z,1528890322.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:22.788Z,1528890322.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:23.163Z,1528890323.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:23.189Z,1528890323.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:23.571Z,1528890323.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:23.589Z,1528890323.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:23.975Z,1528890323.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:23.993Z,1528890323.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:24.375Z,1528890324.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:24.399Z,1528890324.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:24.769Z,1528890324.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:24.824Z,1528890324.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:25.166Z,1528890325.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:25.184Z,1528890325.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:25.567Z,1528890325.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:25.585Z,1528890325.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:25.967Z,1528890325.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:25.986Z,1528890325.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:26.363Z,1528890326.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:26.387Z,1528890326.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:26.778Z,1528890326.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:26.805Z,1528890326.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:27.180Z,1528890327.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:27.204Z,1528890327.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:27.576Z,1528890327.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:27.593Z,1528890327.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:27.959Z,1528890327.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:27.994Z,1528890327.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:28.355Z,1528890328.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:28.391Z,1528890328.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:28.760Z,1528890328.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:28.789Z,1528890328.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:29.159Z,1528890329.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:29.188Z,1528890329.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:29.575Z,1528890329.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:29.594Z,1528890329.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:29.980Z,1528890329.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:29.999Z,1528890329.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:30.380Z,1528890330.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:30.399Z,1528890330.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:30.755Z,1528890330.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:30.792Z,1528890330.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:31.163Z,1528890331.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:31.191Z,1528890331.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:31.560Z,1528890331.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:31.590Z,1528890331.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:31.960Z,1528890331.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:31.990Z,1528890331.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:32.360Z,1528890332.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:32.388Z,1528890332.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:32.781Z,1528890332.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:32.800Z,1528890332.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:33.176Z,1528890333.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:33.194Z,1528890333.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:33.578Z,1528890333.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:33.596Z,1528890333.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:33.959Z,1528890333.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:33.993Z,1528890333.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:34.359Z,1528890334.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:34.392Z,1528890334.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:34.760Z,1528890334.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:34.798Z,1528890334.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:35.159Z,1528890335.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:35.177Z,1528890335.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:35.570Z,1528890335.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:35.631Z,1528890335.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:35.977Z,1528890335.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:36.024Z,1528890336.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:36.373Z,1528890336.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:36.416Z,1528890336.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:36.759Z,1528890336.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:36.784Z,1528890336.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:37.162Z,1528890337.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:37.180Z,1528890337.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:37.561Z,1528890337.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:37.579Z,1528890337.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:37.958Z,1528890337.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:37.976Z,1528890337.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:38.362Z,1528890338.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:38.380Z,1528890338.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:38.773Z,1528890338.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:38.814Z,1528890338.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:39.169Z,1528890339.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:39.187Z,1528890339.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:39.573Z,1528890339.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:39.608Z,1528890339.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:39.961Z,1528890339.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:39.979Z,1528890339.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:40.363Z,1528890340.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:40.380Z,1528890340.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:40.762Z,1528890340.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:40.784Z,1528890340.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:41.162Z,1528890341.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:41.179Z,1528890341.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:41.566Z,1528890341.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:41.584Z,1528890341.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:41.973Z,1528890341.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:41.991Z,1528890341.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:42.373Z,1528890342.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:42.392Z,1528890342.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:42.765Z,1528890342.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:42.783Z,1528890342.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:43.166Z,1528890343.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:43.184Z,1528890343.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:43.561Z,1528890343.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:43.579Z,1528890343.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:43.962Z,1528890343.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:43.980Z,1528890343.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:44.364Z,1528890344.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:44.382Z,1528890344.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:44.773Z,1528890344.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:44.791Z,1528890344.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:45.170Z,1528890345.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:45.192Z,1528890345.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:45.570Z,1528890345.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:45.587Z,1528890345.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:45.962Z,1528890345.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:45.979Z,1528890345.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:46.359Z,1528890346.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:46.382Z,1528890346.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:46.764Z,1528890346.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:46.784Z,1528890346.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:47.164Z,1528890347.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:47.188Z,1528890347.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:47.570Z,1528890347.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:47.619Z,1528890347.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:47.973Z,1528890347.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:47.991Z,1528890347.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:48.373Z,1528890348.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:48.391Z,1528890348.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:48.764Z,1528890348.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:48.782Z,1528890348.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:49.164Z,1528890349.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:49.181Z,1528890349.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:49.565Z,1528890349.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:49.582Z,1528890349.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:49.965Z,1528890349.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:49.983Z,1528890349.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:50.364Z,1528890350.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:50.381Z,1528890350.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:50.769Z,1528890350.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:50.787Z,1528890350.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:51.173Z,1528890351.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:51.191Z,1528890351.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:51.569Z,1528890351.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:51.587Z,1528890351.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:51.965Z,1528890351.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:51.982Z,1528890351.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:52.363Z,1528890352.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:52.380Z,1528890352.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:52.765Z,1528890352.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:52.783Z,1528890352.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:53.166Z,1528890353.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:53.183Z,1528890353.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:53.570Z,1528890353.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:53.588Z,1528890353.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:53.974Z,1528890353.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:53.992Z,1528890353.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:54.373Z,1528890354.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:54.396Z,1528890354.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:54.764Z,1528890354.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:54.782Z,1528890354.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:55.163Z,1528890355.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:55.188Z,1528890355.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:55.564Z,1528890355.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:55.582Z,1528890355.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:55.964Z,1528890355.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:55.982Z,1528890355.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:56.364Z,1528890356.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:56.382Z,1528890356.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:56.773Z,1528890356.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:56.796Z,1528890356.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:57.173Z,1528890357.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:57.191Z,1528890357.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:57.570Z,1528890357.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:57.592Z,1528890357.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:57.965Z,1528890357.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:57.983Z,1528890357.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:58.365Z,1528890358.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:58.383Z,1528890358.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:58.763Z,1528890358.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:58.808Z,1528890358.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:59.163Z,1528890359.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:59.201Z,1528890359.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:59.576Z,1528890359.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:59.594Z,1528890359.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:45:59.978Z,1528890359.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:45:59.995Z,1528890359.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:00.379Z,1528890360.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:00.397Z,1528890360.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:00.765Z,1528890360.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:00.783Z,1528890360.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:01.163Z,1528890361.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:01.193Z,1528890361.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:01.560Z,1528890361.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:01.588Z,1528890361.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:01.959Z,1528890361.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:01.994Z,1528890361.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:02.359Z,1528890362.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:02.395Z,1528890362.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:02.780Z,1528890362.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:02.798Z,1528890362.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:03.179Z,1528890363.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:03.197Z,1528890363.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:03.575Z,1528890363.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:03.606Z,1528890363.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:03.959Z,1528890363.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:03.988Z,1528890363.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:04.359Z,1528890364.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:04.387Z,1528890364.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:04.760Z,1528890364.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:04.790Z,1528890364.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:05.159Z,1528890365.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:05.192Z,1528890365.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:05.577Z,1528890365.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:05.600Z,1528890365.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:05.979Z,1528890365.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:05.998Z,1528890365.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:06.381Z,1528890366.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:06.399Z,1528890366.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:06.759Z,1528890366.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:06.796Z,1528890366.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:07.155Z,1528890367.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:07.192Z,1528890367.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:07.559Z,1528890367.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:07.588Z,1528890367.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:07.959Z,1528890367.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:07.986Z,1528890367.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:08.359Z,1528890368.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:08.387Z,1528890368.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:08.784Z,1528890368.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:08.808Z,1528890368.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:11.905Z,1528890371.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:11.958Z,1528890371.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:12.094Z,1528890372.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:12.136Z,1528890372.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:12.486Z,1528890372.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:12.504Z,1528890372.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:12.886Z,1528890372.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:12.912Z,1528890372.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:13.281Z,1528890373.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:13.299Z,1528890373.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:13.691Z,1528890373.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:13.709Z,1528890373.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:14.090Z,1528890374.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:14.112Z,1528890374.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:14.490Z,1528890374.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:14.508Z,1528890374.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:14.883Z,1528890374.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:14.900Z,1528890374.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:15.281Z,1528890375.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:15.299Z,1528890375.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:15.683Z,1528890375.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:15.700Z,1528890375.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:16.083Z,1528890376.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:16.101Z,1528890376.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:16.482Z,1528890376.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:16.504Z,1528890376.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:16.890Z,1528890376.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:16.908Z,1528890376.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:17.291Z,1528890377.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:17.309Z,1528890377.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:17.691Z,1528890377.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:17.709Z,1528890377.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:18.081Z,1528890378.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:18.099Z,1528890378.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:18.482Z,1528890378.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:18.500Z,1528890378.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:18.882Z,1528890378.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:18.900Z,1528890378.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:19.280Z,1528890379.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:19.298Z,1528890379.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:19.692Z,1528890379.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:19.712Z,1528890379.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:20.090Z,1528890380.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:20.112Z,1528890380.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:20.490Z,1528890380.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:20.512Z,1528890380.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:20.882Z,1528890380.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:20.905Z,1528890380.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:21.281Z,1528890381.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:21.299Z,1528890381.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:21.681Z,1528890381.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:21.699Z,1528890381.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:22.082Z,1528890382.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:22.105Z,1528890382.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:22.478Z,1528890382.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:22.497Z,1528890382.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:22.888Z,1528890382.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:22.905Z,1528890382.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:23.292Z,1528890383.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:23.316Z,1528890383.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:23.686Z,1528890383.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:23.718Z,1528890383.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:24.075Z,1528890384.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:24.103Z,1528890384.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:24.476Z,1528890384.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:24.508Z,1528890384.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:24.876Z,1528890384.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:24.904Z,1528890384.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:25.275Z,1528890385.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:25.303Z,1528890385.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:25.698Z,1528890385.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:25.716Z,1528890385.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:26.091Z,1528890386.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:26.108Z,1528890386.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:26.491Z,1528890386.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:26.510Z,1528890386.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:26.875Z,1528890386.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:26.910Z,1528890386.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:27.276Z,1528890387.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:27.319Z,1528890387.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:27.675Z,1528890387.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:27.712Z,1528890387.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:28.076Z,1528890388.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:28.117Z,1528890388.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:28.475Z,1528890388.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:28.516Z,1528890388.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:28.885Z,1528890388.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:28.912Z,1528890388.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:29.290Z,1528890389.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:29.320Z,1528890389.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:29.681Z,1528890389.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:29.715Z,1528890389.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:30.071Z,1528890390.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:30.088Z,1528890390.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:30.475Z,1528890390.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:30.493Z,1528890390.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:30.876Z,1528890390.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:30.893Z,1528890390.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:31.279Z,1528890391.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:31.296Z,1528890391.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:31.689Z,1528890391.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:31.723Z,1528890391.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:32.093Z,1528890392.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:32.131Z,1528890392.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:32.486Z,1528890392.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:32.503Z,1528890392.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:32.881Z,1528890392.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:32.904Z,1528890392.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:33.280Z,1528890393.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:33.297Z,1528890393.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:33.680Z,1528890393.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:33.697Z,1528890393.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:34.080Z,1528890394.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:34.105Z,1528890394.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:34.475Z,1528890394.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:34.497Z,1528890394.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:34.885Z,1528890394.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:34.903Z,1528890394.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:35.289Z,1528890395.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:35.307Z,1528890395.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:35.686Z,1528890395.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:35.703Z,1528890395.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:36.078Z,1528890396.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:36.097Z,1528890396.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:36.481Z,1528890396.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:36.499Z,1528890396.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:36.883Z,1528890396.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:36.900Z,1528890396.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:37.279Z,1528890397.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:37.304Z,1528890397.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:37.690Z,1528890397.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:37.707Z,1528890397.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:38.085Z,1528890398.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:38.103Z,1528890398.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:38.486Z,1528890398.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:38.503Z,1528890398.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:38.882Z,1528890398.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:38.900Z,1528890398.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:39.279Z,1528890399.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:39.296Z,1528890399.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:39.680Z,1528890399.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:39.698Z,1528890399.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:40.080Z,1528890400.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:40.111Z,1528890400.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:40.475Z,1528890400.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:40.497Z,1528890400.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:40.886Z,1528890400.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:40.904Z,1528890400.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:41.289Z,1528890401.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:41.307Z,1528890401.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:41.686Z,1528890401.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:41.703Z,1528890401.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:42.080Z,1528890402.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:42.098Z,1528890402.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:42.481Z,1528890402.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:42.499Z,1528890402.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:42.880Z,1528890402.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:42.898Z,1528890402.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:43.280Z,1528890403.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:43.297Z,1528890403.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:43.689Z,1528890403.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:43.707Z,1528890403.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:44.089Z,1528890404.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:44.107Z,1528890404.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:44.486Z,1528890404.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:44.503Z,1528890404.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:44.880Z,1528890404.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:44.910Z,1528890404.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:45.281Z,1528890405.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:45.299Z,1528890405.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:45.682Z,1528890405.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:45.699Z,1528890405.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:46.083Z,1528890406.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:46.100Z,1528890406.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:46.475Z,1528890406.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:46.498Z,1528890406.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:46.886Z,1528890406.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:46.908Z,1528890406.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:47.289Z,1528890407.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:47.307Z,1528890407.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:47.686Z,1528890407.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:47.704Z,1528890407.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:48.079Z,1528890408.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:48.104Z,1528890408.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:48.486Z,1528890408.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:48.504Z,1528890408.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:48.882Z,1528890408.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:48.900Z,1528890408.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:49.280Z,1528890409.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:49.298Z,1528890409.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:49.689Z,1528890409.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:49.707Z,1528890409.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:50.086Z,1528890410.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:50.108Z,1528890410.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:50.487Z,1528890410.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:50.512Z,1528890410.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:50.882Z,1528890410.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:50.899Z,1528890410.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:51.275Z,1528890411.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:51.298Z,1528890411.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:51.681Z,1528890411.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:51.698Z,1528890411.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:52.082Z,1528890412.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:52.100Z,1528890412.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:52.475Z,1528890412.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:52.499Z,1528890412.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:52.889Z,1528890412.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:52.907Z,1528890412.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:53.289Z,1528890413.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:53.307Z,1528890413.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:53.686Z,1528890413.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:53.704Z,1528890413.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:54.082Z,1528890414.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:54.099Z,1528890414.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:54.482Z,1528890414.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:54.501Z,1528890414.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:54.875Z,1528890414.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:54.899Z,1528890414.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:55.282Z,1528890415.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:55.300Z,1528890415.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:55.690Z,1528890415.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:55.708Z,1528890415.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:56.086Z,1528890416.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:56.104Z,1528890416.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:56.486Z,1528890416.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:56.512Z,1528890416.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:56.882Z,1528890416.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:56.900Z,1528890416.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:57.275Z,1528890417.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:57.308Z,1528890417.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:57.679Z,1528890417.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:57.702Z,1528890417.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:58.082Z,1528890418.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:58.100Z,1528890418.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:58.475Z,1528890418.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:58.498Z,1528890418.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:58.886Z,1528890418.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:58.908Z,1528890418.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:59.290Z,1528890419.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:59.316Z,1528890419.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:46:59.690Z,1528890419.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:46:59.708Z,1528890419.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:00.081Z,1528890420.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:00.099Z,1528890420.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:00.482Z,1528890420.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:00.504Z,1528890420.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:00.875Z,1528890420.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:00.900Z,1528890420.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:01.274Z,1528890421.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:01.306Z,1528890421.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:01.691Z,1528890421.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:01.716Z,1528890421.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:02.091Z,1528890422.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:02.116Z,1528890422.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:02.490Z,1528890422.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:02.512Z,1528890422.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:02.879Z,1528890422.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:02.904Z,1528890422.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:03.275Z,1528890423.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:03.300Z,1528890423.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:03.682Z,1528890423.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:03.699Z,1528890423.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:04.079Z,1528890424.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:04.115Z,1528890424.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:04.482Z,1528890424.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:04.504Z,1528890424.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:04.891Z,1528890424.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:04.909Z,1528890424.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:05.291Z,1528890425.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:05.309Z,1528890425.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:05.687Z,1528890425.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:05.706Z,1528890425.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:06.079Z,1528890426.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:06.116Z,1528890426.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:06.482Z,1528890426.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:06.506Z,1528890426.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:06.872Z,1528890426.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:06.902Z,1528890426.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:07.278Z,1528890427.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:07.301Z,1528890427.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:07.695Z,1528890427.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:07.714Z,1528890427.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:08.091Z,1528890428.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:08.109Z,1528890428.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:08.494Z,1528890428.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:08.516Z,1528890428.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:08.882Z,1528890428.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:08.906Z,1528890428.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:12.018Z,1528890432.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:12.044Z,1528890432.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:12.155Z,1528890432.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:12.200Z,1528890432.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:12.581Z,1528890432.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:12.600Z,1528890432.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:12.969Z,1528890432.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:13.006Z,1528890433.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:13.378Z,1528890433.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:13.402Z,1528890433.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:13.760Z,1528890433.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:13.800Z,1528890433.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:14.156Z,1528890434.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:14.193Z,1528890434.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:14.559Z,1528890434.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:14.576Z,1528890434.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:14.969Z,1528890434.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:15.011Z,1528890435.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:15.373Z,1528890435.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:15.401Z,1528890435.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:15.769Z,1528890435.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:15.804Z,1528890435.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:16.155Z,1528890436.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:16.173Z,1528890436.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:16.558Z,1528890436.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:16.576Z,1528890436.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:16.960Z,1528890436.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:16.978Z,1528890436.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:17.355Z,1528890437.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:17.373Z,1528890437.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:17.770Z,1528890437.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:17.807Z,1528890437.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:18.173Z,1528890438.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:18.208Z,1528890438.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:18.573Z,1528890438.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:18.591Z,1528890438.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:18.962Z,1528890438.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:18.980Z,1528890438.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:19.364Z,1528890439.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:19.388Z,1528890439.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:19.766Z,1528890439.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:19.784Z,1528890439.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:20.161Z,1528890440.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:20.179Z,1528890440.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:20.564Z,1528890440.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:20.582Z,1528890440.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:20.973Z,1528890440.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:20.992Z,1528890440.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:21.369Z,1528890441.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:21.389Z,1528890441.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:21.770Z,1528890441.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:21.787Z,1528890441.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:22.165Z,1528890442.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:22.183Z,1528890442.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:22.561Z,1528890442.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:22.584Z,1528890442.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:22.964Z,1528890442.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:22.982Z,1528890442.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:23.365Z,1528890443.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:23.383Z,1528890443.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:23.767Z,1528890443.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:23.785Z,1528890443.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:24.173Z,1528890444.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:24.191Z,1528890444.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:24.573Z,1528890444.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:24.591Z,1528890444.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:24.961Z,1528890444.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:24.979Z,1528890444.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:25.364Z,1528890445.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:25.382Z,1528890445.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:25.759Z,1528890445.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:25.796Z,1528890445.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:26.162Z,1528890446.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:26.179Z,1528890446.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:26.555Z,1528890446.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:26.584Z,1528890446.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:26.980Z,1528890446.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:26.999Z,1528890446.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:27.374Z,1528890447.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:27.392Z,1528890447.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:27.771Z,1528890447.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:27.789Z,1528890447.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:28.155Z,1528890448.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:28.190Z,1528890448.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:28.556Z,1528890448.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:28.593Z,1528890448.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:28.960Z,1528890448.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:28.995Z,1528890448.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:29.359Z,1528890449.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:29.400Z,1528890449.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:29.765Z,1528890449.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:29.801Z,1528890449.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:30.173Z,1528890450.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:30.202Z,1528890450.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:30.581Z,1528890450.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:30.604Z,1528890450.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:30.955Z,1528890450.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:30.995Z,1528890450.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:31.359Z,1528890451.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:31.392Z,1528890451.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:31.755Z,1528890451.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:31.773Z,1528890451.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:32.156Z,1528890452.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:32.173Z,1528890452.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:32.559Z,1528890452.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:32.576Z,1528890452.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:32.973Z,1528890452.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:33.009Z,1528890453.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:33.369Z,1528890453.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:33.407Z,1528890453.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:33.773Z,1528890453.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:33.811Z,1528890453.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:34.162Z,1528890454.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:34.180Z,1528890454.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:34.561Z,1528890454.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:34.578Z,1528890454.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:34.964Z,1528890454.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:34.982Z,1528890454.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:35.364Z,1528890455.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:35.383Z,1528890455.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:35.766Z,1528890455.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:35.784Z,1528890455.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:36.169Z,1528890456.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:36.187Z,1528890456.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:36.573Z,1528890456.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:36.591Z,1528890456.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:36.961Z,1528890456.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:36.979Z,1528890456.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:37.364Z,1528890457.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:37.383Z,1528890457.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:37.766Z,1528890457.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:37.784Z,1528890457.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:38.163Z,1528890458.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:38.181Z,1528890458.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:38.565Z,1528890458.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:38.583Z,1528890458.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:38.973Z,1528890458.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:38.991Z,1528890458.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:39.369Z,1528890459.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:39.387Z,1528890459.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:39.774Z,1528890459.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:39.791Z,1528890459.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:40.167Z,1528890460.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:40.185Z,1528890460.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:40.562Z,1528890460.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:40.579Z,1528890460.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:40.965Z,1528890460.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:40.983Z,1528890460.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:41.364Z,1528890461.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:41.387Z,1528890461.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:41.767Z,1528890461.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:41.784Z,1528890461.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:42.174Z,1528890462.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:42.216Z,1528890462.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:42.571Z,1528890462.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:42.589Z,1528890462.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:42.961Z,1528890462.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:42.979Z,1528890462.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:43.365Z,1528890463.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:43.383Z,1528890463.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:43.766Z,1528890463.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:43.784Z,1528890463.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:44.161Z,1528890464.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:44.179Z,1528890464.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:44.564Z,1528890464.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:44.582Z,1528890464.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:44.974Z,1528890464.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:44.992Z,1528890464.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:45.370Z,1528890465.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:45.392Z,1528890465.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:45.770Z,1528890465.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:45.792Z,1528890465.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:46.162Z,1528890466.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:46.180Z,1528890466.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:46.561Z,1528890466.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:46.579Z,1528890466.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:46.966Z,1528890466.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:46.985Z,1528890466.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:47.362Z,1528890467.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:47.380Z,1528890467.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:47.771Z,1528890467.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:47.796Z,1528890467.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:48.173Z,1528890468.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:48.191Z,1528890468.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:48.574Z,1528890468.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:48.591Z,1528890468.591 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:48.592Z,1528890468.592 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 167
2018-06-13T11:47:48.592Z,1528890468.592 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:47:48.594Z,1528890468.594 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:48.594Z,1528890468.594 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 167
2018-06-13T11:47:48.594Z,1528890468.594 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:47:48.595Z,1528890468.595 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:48.596Z,1528890468.596 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 167
2018-06-13T11:47:48.596Z,1528890468.596 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:47:48.693Z,1528890468.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:47:48.693Z,1528890468.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:47:48.693Z,1528890468.693 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:47:48.956Z,1528890468.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:49.062Z,1528890469.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:47:49.062Z,1528890469.062 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 167
2018-06-13T11:47:49.063Z,1528890469.063 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:47:49.063Z,1528890469.063 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 167
2018-06-13T11:47:49.063Z,1528890469.063 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:47:49.063Z,1528890469.063 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 167
2018-06-13T11:47:49.356Z,1528890469.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:49.386Z,1528890469.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:47:49.387Z,1528890469.387 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:47:49.387Z,1528890469.387 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:47:49.387Z,1528890469.387 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:47:49.388Z,1528890469.388 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:47:49.388Z,1528890469.388 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:47:49.388Z,1528890469.388 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:47:49.389Z,1528890469.389 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:47:49.389Z,1528890469.389 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:47:49.751Z,1528890469.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:49.794Z,1528890469.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:47:49.795Z,1528890469.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:50.152Z,1528890470.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:50.181Z,1528890470.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:47:50.182Z,1528890470.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:50.556Z,1528890470.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:50.595Z,1528890470.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:47:50.596Z,1528890470.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:50.972Z,1528890470.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:50.990Z,1528890470.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:47:50.991Z,1528890470.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:51.380Z,1528890471.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:51.398Z,1528890471.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:47:51.399Z,1528890471.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:51.778Z,1528890471.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:51.795Z,1528890471.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:47:51.796Z,1528890471.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:52.155Z,1528890472.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:52.184Z,1528890472.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:47:52.185Z,1528890472.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:52.552Z,1528890472.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:52.588Z,1528890472.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:47:52.589Z,1528890472.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:52.951Z,1528890472.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:52.978Z,1528890472.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:47:52.979Z,1528890472.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:53.351Z,1528890473.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:53.368Z,1528890473.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:47:53.385Z,1528890473.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:53.769Z,1528890473.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:53.798Z,1528890473.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:47:53.799Z,1528890473.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:54.169Z,1528890474.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:54.208Z,1528890474.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:47:54.213Z,1528890474.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:54.569Z,1528890474.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:54.601Z,1528890474.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:47:54.602Z,1528890474.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:54.954Z,1528890474.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:54.971Z,1528890474.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:47:54.972Z,1528890474.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:55.359Z,1528890475.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:55.400Z,1528890475.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:47:55.406Z,1528890475.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:55.754Z,1528890475.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:55.771Z,1528890475.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:47:55.772Z,1528890475.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:56.157Z,1528890476.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:56.174Z,1528890476.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:47:56.175Z,1528890476.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:56.558Z,1528890476.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:56.576Z,1528890476.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:47:56.577Z,1528890476.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:56.969Z,1528890476.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:56.986Z,1528890476.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:47:56.987Z,1528890476.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:57.365Z,1528890477.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:57.383Z,1528890477.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:47:57.384Z,1528890477.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:57.766Z,1528890477.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:57.783Z,1528890477.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:47:57.784Z,1528890477.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:58.158Z,1528890478.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:58.175Z,1528890478.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:47:58.176Z,1528890478.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:58.554Z,1528890478.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:58.575Z,1528890478.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:47:58.576Z,1528890478.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:58.957Z,1528890478.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:58.981Z,1528890478.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:47:58.982Z,1528890478.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:59.366Z,1528890479.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:59.383Z,1528890479.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:47:59.384Z,1528890479.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:47:59.767Z,1528890479.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:47:59.785Z,1528890479.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:47:59.786Z,1528890479.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:00.174Z,1528890480.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:00.191Z,1528890480.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:48:00.192Z,1528890480.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:00.572Z,1528890480.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:00.589Z,1528890480.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:48:00.590Z,1528890480.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:00.951Z,1528890480.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:00.978Z,1528890480.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:48:00.979Z,1528890480.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:01.359Z,1528890481.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:01.388Z,1528890481.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:48:01.394Z,1528890481.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:01.755Z,1528890481.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:01.787Z,1528890481.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:48:01.788Z,1528890481.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:02.152Z,1528890482.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:02.181Z,1528890482.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:48:02.182Z,1528890482.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:02.555Z,1528890482.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:02.588Z,1528890482.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:48:02.593Z,1528890482.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:02.965Z,1528890482.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:03.003Z,1528890483.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:48:03.004Z,1528890483.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:03.365Z,1528890483.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:03.393Z,1528890483.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:48:03.394Z,1528890483.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:03.766Z,1528890483.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:03.792Z,1528890483.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:48:03.793Z,1528890483.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:04.156Z,1528890484.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:04.187Z,1528890484.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:48:04.189Z,1528890484.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:04.551Z,1528890484.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:04.568Z,1528890484.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:48:04.569Z,1528890484.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:04.956Z,1528890484.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:04.982Z,1528890484.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:48:04.983Z,1528890484.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:05.357Z,1528890485.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:05.374Z,1528890485.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:48:05.375Z,1528890485.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:05.769Z,1528890485.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:05.787Z,1528890485.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:48:05.788Z,1528890485.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:06.170Z,1528890486.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:06.192Z,1528890486.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:48:06.213Z,1528890486.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:06.566Z,1528890486.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:06.583Z,1528890486.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:48:06.584Z,1528890486.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:06.962Z,1528890486.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:06.979Z,1528890486.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:48:06.980Z,1528890486.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:07.359Z,1528890487.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:07.380Z,1528890487.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:48:07.382Z,1528890487.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:07.762Z,1528890487.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:07.778Z,1528890487.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:48:07.779Z,1528890487.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:08.162Z,1528890488.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:08.180Z,1528890488.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:48:08.181Z,1528890488.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:08.564Z,1528890488.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:08.581Z,1528890488.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T11:48:08.582Z,1528890488.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:08.585Z,1528890488.585 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T11:48:08.585Z,1528890488.585 [Default:CheckIn:C.Wait] Stopped
2018-06-13T11:48:08.585Z,1528890488.585 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T11:48:08.585Z,1528890488.585 [Default:CheckIn:D] Running Loop=1
2018-06-13T11:48:08.971Z,1528890488.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:08.996Z,1528890488.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:08.999Z,1528890488.999 [Default:CheckIn:D] Stopped
2018-06-13T11:48:08.999Z,1528890488.999 [Default:CheckIn:E] Running Loop=1
2018-06-13T11:48:12.086Z,1528890492.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:12.125Z,1528890492.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:12.129Z,1528890492.129 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 500.925911 min 
2018-06-13T11:48:12.129Z,1528890492.129 [Default:CheckIn:E] Stopped
2018-06-13T11:48:12.129Z,1528890492.129 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T11:48:12.129Z,1528890492.129 [Default:CheckIn] Stopped
2018-06-13T11:48:12.129Z,1528890492.129 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T11:48:12.130Z,1528890492.130 [Default:CheckIn](INFO): Running loop #49
2018-06-13T11:48:12.130Z,1528890492.130 [Default:CheckIn] Running Loop=49
2018-06-13T11:48:12.130Z,1528890492.130 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T11:48:12.130Z,1528890492.130 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T11:48:12.246Z,1528890492.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:12.295Z,1528890492.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:12.639Z,1528890492.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:12.670Z,1528890492.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:13.040Z,1528890493.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:13.078Z,1528890493.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:13.439Z,1528890493.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:13.484Z,1528890493.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:13.849Z,1528890493.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:13.890Z,1528890493.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:14.254Z,1528890494.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:14.286Z,1528890494.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:14.650Z,1528890494.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:14.685Z,1528890494.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:15.038Z,1528890495.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:15.056Z,1528890495.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:15.438Z,1528890495.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:15.456Z,1528890495.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:15.838Z,1528890495.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:15.856Z,1528890495.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:16.238Z,1528890496.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:16.256Z,1528890496.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:16.638Z,1528890496.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:16.656Z,1528890496.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:17.050Z,1528890497.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:17.083Z,1528890497.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:17.448Z,1528890497.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:17.465Z,1528890497.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:17.850Z,1528890497.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:17.867Z,1528890497.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:18.242Z,1528890498.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:18.261Z,1528890498.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:18.640Z,1528890498.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:18.658Z,1528890498.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:19.039Z,1528890499.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:19.064Z,1528890499.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:19.440Z,1528890499.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:19.458Z,1528890499.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:19.845Z,1528890499.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:19.863Z,1528890499.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:20.250Z,1528890500.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:20.289Z,1528890500.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:20.646Z,1528890500.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:20.663Z,1528890500.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:21.040Z,1528890501.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:21.070Z,1528890501.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:21.441Z,1528890501.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:21.467Z,1528890501.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:21.839Z,1528890501.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:21.868Z,1528890501.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:22.243Z,1528890502.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:22.261Z,1528890502.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:22.631Z,1528890502.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:22.667Z,1528890502.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:23.052Z,1528890503.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:23.076Z,1528890503.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:23.456Z,1528890503.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:23.480Z,1528890503.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:23.852Z,1528890503.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:23.870Z,1528890503.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:24.239Z,1528890504.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:24.263Z,1528890504.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:24.642Z,1528890504.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:24.660Z,1528890504.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:25.042Z,1528890505.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:25.069Z,1528890505.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:25.438Z,1528890505.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:25.462Z,1528890505.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:25.856Z,1528890505.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:25.880Z,1528890505.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:26.255Z,1528890506.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:26.272Z,1528890506.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:26.652Z,1528890506.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:26.669Z,1528890506.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:27.043Z,1528890507.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:27.061Z,1528890507.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:27.431Z,1528890507.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:27.468Z,1528890507.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:27.843Z,1528890507.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:27.868Z,1528890507.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:28.247Z,1528890508.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:28.265Z,1528890508.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:28.642Z,1528890508.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:28.664Z,1528890508.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:29.052Z,1528890509.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:29.070Z,1528890509.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:29.456Z,1528890509.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:29.480Z,1528890509.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:29.852Z,1528890509.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:29.870Z,1528890509.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:30.239Z,1528890510.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:30.263Z,1528890510.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:30.635Z,1528890510.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:30.674Z,1528890510.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:31.036Z,1528890511.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:31.072Z,1528890511.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:31.435Z,1528890511.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:31.468Z,1528890511.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:31.850Z,1528890511.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:31.886Z,1528890511.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:32.248Z,1528890512.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:32.281Z,1528890512.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:32.646Z,1528890512.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:32.673Z,1528890512.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:33.035Z,1528890513.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:33.077Z,1528890513.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:33.435Z,1528890513.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:33.453Z,1528890513.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:33.835Z,1528890513.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:33.870Z,1528890513.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:34.240Z,1528890514.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:34.264Z,1528890514.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:34.638Z,1528890514.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:34.664Z,1528890514.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:35.050Z,1528890515.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:35.067Z,1528890515.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:35.449Z,1528890515.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:35.467Z,1528890515.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:35.850Z,1528890515.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:35.867Z,1528890515.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:36.242Z,1528890516.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:36.268Z,1528890516.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:36.640Z,1528890516.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:36.683Z,1528890516.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:37.042Z,1528890517.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:37.060Z,1528890517.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:37.442Z,1528890517.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:37.460Z,1528890517.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:37.850Z,1528890517.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:37.868Z,1528890517.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:38.250Z,1528890518.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:38.272Z,1528890518.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:38.647Z,1528890518.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:38.664Z,1528890518.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:39.042Z,1528890519.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:39.061Z,1528890519.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:39.441Z,1528890519.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:39.464Z,1528890519.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:39.841Z,1528890519.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:39.867Z,1528890519.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:40.243Z,1528890520.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:40.262Z,1528890520.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:40.637Z,1528890520.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:40.655Z,1528890520.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:41.046Z,1528890521.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:41.065Z,1528890521.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:41.450Z,1528890521.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:41.473Z,1528890521.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:41.846Z,1528890521.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:41.863Z,1528890521.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:42.244Z,1528890522.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:42.263Z,1528890522.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:42.642Z,1528890522.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:42.660Z,1528890522.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:43.035Z,1528890523.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:43.059Z,1528890523.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:43.440Z,1528890523.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:43.458Z,1528890523.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:43.850Z,1528890523.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:43.868Z,1528890523.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:44.250Z,1528890524.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:44.272Z,1528890524.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:44.651Z,1528890524.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:44.669Z,1528890524.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:45.042Z,1528890525.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:45.064Z,1528890525.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:45.431Z,1528890525.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:45.467Z,1528890525.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:45.835Z,1528890525.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:45.871Z,1528890525.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:46.236Z,1528890526.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:46.278Z,1528890526.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:46.635Z,1528890526.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:46.662Z,1528890526.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:47.052Z,1528890527.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:47.070Z,1528890527.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:47.456Z,1528890527.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:47.474Z,1528890527.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:47.848Z,1528890527.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:47.866Z,1528890527.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:48.245Z,1528890528.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:48.269Z,1528890528.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:48.635Z,1528890528.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:48.674Z,1528890528.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:49.032Z,1528890529.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:49.062Z,1528890529.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:49.434Z,1528890529.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:49.471Z,1528890529.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:49.857Z,1528890529.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:49.875Z,1528890529.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:50.252Z,1528890530.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:50.270Z,1528890530.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:50.642Z,1528890530.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:50.676Z,1528890530.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:51.035Z,1528890531.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:51.070Z,1528890531.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:51.435Z,1528890531.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:51.469Z,1528890531.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:51.835Z,1528890531.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:51.852Z,1528890531.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:52.236Z,1528890532.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:52.256Z,1528890532.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:52.635Z,1528890532.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:52.653Z,1528890532.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:53.050Z,1528890533.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:53.083Z,1528890533.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:53.453Z,1528890533.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:53.482Z,1528890533.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:53.850Z,1528890533.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:53.884Z,1528890533.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:54.239Z,1528890534.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:54.256Z,1528890534.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:54.639Z,1528890534.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:54.657Z,1528890534.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:55.035Z,1528890535.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:55.052Z,1528890535.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:55.438Z,1528890535.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:55.456Z,1528890535.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:55.850Z,1528890535.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:55.880Z,1528890535.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:56.249Z,1528890536.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:56.267Z,1528890536.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:56.645Z,1528890536.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:56.663Z,1528890536.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:57.042Z,1528890537.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:57.060Z,1528890537.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:57.437Z,1528890537.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:57.455Z,1528890537.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:57.840Z,1528890537.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:57.859Z,1528890537.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:58.243Z,1528890538.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:58.261Z,1528890538.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:58.641Z,1528890538.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:58.659Z,1528890538.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:59.045Z,1528890539.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:59.063Z,1528890539.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:59.449Z,1528890539.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:59.467Z,1528890539.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:48:59.842Z,1528890539.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:48:59.869Z,1528890539.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:00.240Z,1528890540.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:00.258Z,1528890540.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:00.638Z,1528890540.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:00.665Z,1528890540.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:01.038Z,1528890541.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:01.056Z,1528890541.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:01.439Z,1528890541.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:01.469Z,1528890541.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:01.852Z,1528890541.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:01.872Z,1528890541.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:02.251Z,1528890542.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:02.269Z,1528890542.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:02.652Z,1528890542.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:02.670Z,1528890542.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:03.042Z,1528890543.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:03.073Z,1528890543.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:03.442Z,1528890543.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:03.464Z,1528890543.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:03.839Z,1528890543.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:03.862Z,1528890543.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:04.247Z,1528890544.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:04.265Z,1528890544.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:04.638Z,1528890544.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:04.656Z,1528890544.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:05.051Z,1528890545.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:05.068Z,1528890545.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:05.452Z,1528890545.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:05.470Z,1528890545.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:05.851Z,1528890545.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:05.868Z,1528890545.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:06.239Z,1528890546.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:06.263Z,1528890546.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:06.643Z,1528890546.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:06.661Z,1528890546.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:07.035Z,1528890547.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:07.060Z,1528890547.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:07.442Z,1528890547.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:07.460Z,1528890547.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:07.851Z,1528890547.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:07.870Z,1528890547.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:08.254Z,1528890548.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:08.276Z,1528890548.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:08.650Z,1528890548.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:08.669Z,1528890548.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:09.047Z,1528890549.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:09.072Z,1528890549.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:12.150Z,1528890552.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:12.168Z,1528890552.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:12.293Z,1528890552.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:12.340Z,1528890552.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:12.703Z,1528890552.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:12.721Z,1528890552.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:13.099Z,1528890553.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:13.124Z,1528890553.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:13.496Z,1528890553.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:13.514Z,1528890553.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:13.879Z,1528890553.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:13.918Z,1528890553.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:14.280Z,1528890554.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:14.307Z,1528890554.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:14.679Z,1528890554.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:14.705Z,1528890554.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:15.100Z,1528890555.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:15.118Z,1528890555.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:15.499Z,1528890555.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:15.518Z,1528890555.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:15.894Z,1528890555.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:15.919Z,1528890555.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:16.280Z,1528890556.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:16.320Z,1528890556.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:16.679Z,1528890556.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:16.712Z,1528890556.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:17.080Z,1528890557.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:17.113Z,1528890557.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:17.479Z,1528890557.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:17.497Z,1528890557.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:17.889Z,1528890557.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:17.923Z,1528890557.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:18.302Z,1528890558.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:18.328Z,1528890558.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:18.693Z,1528890558.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:18.727Z,1528890558.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:19.083Z,1528890559.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:19.101Z,1528890559.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:19.482Z,1528890559.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:19.500Z,1528890559.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:19.882Z,1528890559.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:19.900Z,1528890559.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:20.283Z,1528890560.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:20.302Z,1528890560.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:20.686Z,1528890560.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:20.704Z,1528890560.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:21.093Z,1528890561.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:21.111Z,1528890561.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:21.493Z,1528890561.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:21.511Z,1528890561.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:21.890Z,1528890561.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:21.908Z,1528890561.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:22.285Z,1528890562.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:22.303Z,1528890562.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:22.684Z,1528890562.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:22.702Z,1528890562.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:23.086Z,1528890563.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:23.104Z,1528890563.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:23.485Z,1528890563.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:23.508Z,1528890563.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:23.889Z,1528890563.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:23.908Z,1528890563.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:24.293Z,1528890564.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:24.316Z,1528890564.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:24.693Z,1528890564.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:24.712Z,1528890564.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:25.085Z,1528890565.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:25.103Z,1528890565.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:25.484Z,1528890565.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:25.502Z,1528890565.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:25.890Z,1528890565.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:25.908Z,1528890565.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:26.285Z,1528890566.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:26.303Z,1528890566.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:26.683Z,1528890566.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:26.705Z,1528890566.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:27.093Z,1528890567.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:27.111Z,1528890567.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:27.493Z,1528890567.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:27.511Z,1528890567.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:27.891Z,1528890567.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:27.908Z,1528890567.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:28.283Z,1528890568.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:28.316Z,1528890568.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:28.679Z,1528890568.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:28.702Z,1528890568.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:29.085Z,1528890569.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:29.103Z,1528890569.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:29.483Z,1528890569.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:29.513Z,1528890569.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:29.894Z,1528890569.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:29.920Z,1528890569.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:30.294Z,1528890570.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:30.316Z,1528890570.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:30.697Z,1528890570.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:30.715Z,1528890570.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:31.085Z,1528890571.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:31.103Z,1528890571.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:31.483Z,1528890571.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:31.513Z,1528890571.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:31.886Z,1528890571.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:31.904Z,1528890571.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:32.286Z,1528890572.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:32.303Z,1528890572.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:32.683Z,1528890572.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:32.707Z,1528890572.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:33.099Z,1528890573.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:33.118Z,1528890573.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:33.498Z,1528890573.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:33.516Z,1528890573.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:33.895Z,1528890573.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:33.913Z,1528890573.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:34.286Z,1528890574.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:34.304Z,1528890574.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:34.685Z,1528890574.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:34.708Z,1528890574.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:35.083Z,1528890575.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:35.113Z,1528890575.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:35.479Z,1528890575.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:35.522Z,1528890575.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:35.895Z,1528890575.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:35.913Z,1528890575.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:36.299Z,1528890576.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:36.316Z,1528890576.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:36.700Z,1528890576.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:36.724Z,1528890576.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:37.079Z,1528890577.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:37.113Z,1528890577.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:37.480Z,1528890577.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:37.515Z,1528890577.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:37.879Z,1528890577.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:37.916Z,1528890577.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:38.276Z,1528890578.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:38.303Z,1528890578.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:38.679Z,1528890578.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:38.712Z,1528890578.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:39.099Z,1528890579.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:39.118Z,1528890579.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:39.499Z,1528890579.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:39.517Z,1528890579.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:39.895Z,1528890579.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:39.913Z,1528890579.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:40.279Z,1528890580.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:40.314Z,1528890580.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:40.679Z,1528890580.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:40.711Z,1528890580.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:41.080Z,1528890581.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:41.115Z,1528890581.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:41.479Z,1528890581.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:41.518Z,1528890581.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:41.896Z,1528890581.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:41.914Z,1528890581.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:42.304Z,1528890582.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:42.328Z,1528890582.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:42.700Z,1528890582.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:42.718Z,1528890582.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:43.079Z,1528890583.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:43.111Z,1528890583.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:43.479Z,1528890583.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:43.511Z,1528890583.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:43.879Z,1528890583.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:43.913Z,1528890583.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:44.281Z,1528890584.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:44.309Z,1528890584.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:44.679Z,1528890584.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:44.711Z,1528890584.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:45.100Z,1528890585.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:45.118Z,1528890585.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:45.498Z,1528890585.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:45.516Z,1528890585.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:45.896Z,1528890585.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:45.920Z,1528890585.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:46.283Z,1528890586.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:46.314Z,1528890586.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:46.679Z,1528890586.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:46.718Z,1528890586.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:47.080Z,1528890587.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:47.110Z,1528890587.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:47.479Z,1528890587.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:47.497Z,1528890587.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:47.893Z,1528890587.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:47.932Z,1528890587.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:48.294Z,1528890588.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:48.334Z,1528890588.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:48.698Z,1528890588.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:48.727Z,1528890588.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:49.083Z,1528890589.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:49.124Z,1528890589.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:49.482Z,1528890589.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:49.500Z,1528890589.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:49.882Z,1528890589.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:49.901Z,1528890589.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:50.278Z,1528890590.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:50.296Z,1528890590.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:50.682Z,1528890590.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:50.700Z,1528890590.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:51.094Z,1528890591.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:51.129Z,1528890591.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:51.494Z,1528890591.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:51.512Z,1528890591.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:51.890Z,1528890591.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:51.907Z,1528890591.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:52.285Z,1528890592.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:52.303Z,1528890592.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:52.684Z,1528890592.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:52.702Z,1528890592.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:53.084Z,1528890593.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:53.102Z,1528890593.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:53.484Z,1528890593.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:53.502Z,1528890593.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:53.897Z,1528890593.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:53.915Z,1528890593.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:54.293Z,1528890594.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:54.311Z,1528890594.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:54.693Z,1528890594.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:54.711Z,1528890594.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:55.079Z,1528890595.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:55.102Z,1528890595.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:55.486Z,1528890595.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:55.503Z,1528890595.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:55.891Z,1528890595.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:55.924Z,1528890595.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:56.294Z,1528890596.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:56.316Z,1528890596.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:56.696Z,1528890596.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:56.720Z,1528890596.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:57.086Z,1528890597.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:57.109Z,1528890597.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:57.485Z,1528890597.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:57.503Z,1528890597.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:57.893Z,1528890597.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:57.911Z,1528890597.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:58.296Z,1528890598.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:58.313Z,1528890598.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:58.692Z,1528890598.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:58.709Z,1528890598.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:59.084Z,1528890599.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:59.110Z,1528890599.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:59.483Z,1528890599.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:59.513Z,1528890599.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:49:59.899Z,1528890599.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:49:59.918Z,1528890599.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:00.298Z,1528890600.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:00.328Z,1528890600.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:00.696Z,1528890600.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:00.727Z,1528890600.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:01.080Z,1528890601.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:01.110Z,1528890601.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:01.479Z,1528890601.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:01.520Z,1528890601.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:01.900Z,1528890601.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:01.919Z,1528890601.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:02.299Z,1528890602.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:02.317Z,1528890602.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:02.694Z,1528890602.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:02.718Z,1528890602.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:03.079Z,1528890603.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:03.112Z,1528890603.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:03.479Z,1528890603.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:03.511Z,1528890603.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:03.896Z,1528890603.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:03.913Z,1528890603.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:04.299Z,1528890604.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:04.317Z,1528890604.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:04.696Z,1528890604.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:04.715Z,1528890604.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:05.080Z,1528890605.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:05.115Z,1528890605.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:05.479Z,1528890605.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:05.512Z,1528890605.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:05.896Z,1528890605.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:05.914Z,1528890605.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:06.299Z,1528890606.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:06.316Z,1528890606.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:06.699Z,1528890606.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:06.717Z,1528890606.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:07.076Z,1528890607.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:07.113Z,1528890607.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:07.479Z,1528890607.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:07.512Z,1528890607.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:07.893Z,1528890607.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:07.928Z,1528890607.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:08.293Z,1528890608.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:08.328Z,1528890608.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:08.689Z,1528890608.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:08.716Z,1528890608.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:09.079Z,1528890609.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:09.121Z,1528890609.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:09.479Z,1528890609.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:09.496Z,1528890609.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:09.893Z,1528890609.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:09.927Z,1528890609.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:10.297Z,1528890610.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:10.325Z,1528890610.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:10.690Z,1528890610.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:10.723Z,1528890610.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:11.082Z,1528890611.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:11.100Z,1528890611.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:11.481Z,1528890611.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:11.499Z,1528890611.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:11.897Z,1528890611.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:11.930Z,1528890611.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:15.076Z,1528890615.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:15.093Z,1528890615.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:15.227Z,1528890615.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:15.277Z,1528890615.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:15.607Z,1528890615.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:15.634Z,1528890615.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:16.004Z,1528890616.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:16.036Z,1528890616.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:16.400Z,1528890616.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:16.435Z,1528890616.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:16.803Z,1528890616.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:16.831Z,1528890616.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:17.220Z,1528890617.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:17.237Z,1528890617.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:17.624Z,1528890617.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:17.648Z,1528890617.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:18.019Z,1528890618.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:18.037Z,1528890618.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:18.403Z,1528890618.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:18.431Z,1528890618.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:18.799Z,1528890618.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:18.836Z,1528890618.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:19.204Z,1528890619.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:19.231Z,1528890619.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:19.603Z,1528890619.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:19.631Z,1528890619.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:20.019Z,1528890620.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:20.037Z,1528890620.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:20.423Z,1528890620.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:20.441Z,1528890620.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:20.824Z,1528890620.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:20.841Z,1528890620.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:21.199Z,1528890621.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:21.240Z,1528890621.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:21.603Z,1528890621.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:21.631Z,1528890621.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:22.003Z,1528890622.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:22.031Z,1528890622.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:22.400Z,1528890622.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:22.435Z,1528890622.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:22.803Z,1528890622.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:22.830Z,1528890622.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:23.224Z,1528890623.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:23.242Z,1528890623.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:23.619Z,1528890623.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:23.637Z,1528890623.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:24.019Z,1528890624.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:24.037Z,1528890624.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:24.400Z,1528890624.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:24.438Z,1528890624.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:24.799Z,1528890624.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:24.835Z,1528890624.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:25.204Z,1528890625.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:25.230Z,1528890625.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:25.603Z,1528890625.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:25.630Z,1528890625.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:26.019Z,1528890626.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:26.037Z,1528890626.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:26.427Z,1528890626.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:26.452Z,1528890626.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:26.819Z,1528890626.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:26.848Z,1528890626.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:27.199Z,1528890627.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:27.236Z,1528890627.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:27.603Z,1528890627.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:27.638Z,1528890627.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:28.003Z,1528890628.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:28.031Z,1528890628.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:28.404Z,1528890628.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:28.432Z,1528890628.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:28.803Z,1528890628.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:28.830Z,1528890628.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:29.227Z,1528890629.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:29.245Z,1528890629.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:29.618Z,1528890629.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:29.636Z,1528890629.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:30.019Z,1528890630.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:30.037Z,1528890630.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:30.403Z,1528890630.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:30.431Z,1528890630.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:30.799Z,1528890630.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:30.835Z,1528890630.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:31.204Z,1528890631.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:31.232Z,1528890631.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:31.599Z,1528890631.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:31.639Z,1528890631.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:32.016Z,1528890632.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:32.033Z,1528890632.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:32.423Z,1528890632.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:32.441Z,1528890632.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:32.823Z,1528890632.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:32.841Z,1528890632.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:33.199Z,1528890633.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:33.258Z,1528890633.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:33.603Z,1528890633.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:33.629Z,1528890633.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:34.007Z,1528890634.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:34.035Z,1528890634.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:34.400Z,1528890634.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:34.435Z,1528890634.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:34.803Z,1528890634.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:34.830Z,1528890634.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:35.223Z,1528890635.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:35.242Z,1528890635.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:35.618Z,1528890635.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:35.636Z,1528890635.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:36.021Z,1528890636.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:36.039Z,1528890636.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:36.400Z,1528890636.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:36.433Z,1528890636.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:36.799Z,1528890636.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:36.832Z,1528890636.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:37.208Z,1528890637.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:37.235Z,1528890637.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:37.603Z,1528890637.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:37.632Z,1528890637.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:38.021Z,1528890638.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:38.039Z,1528890638.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:38.424Z,1528890638.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:38.448Z,1528890638.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:38.817Z,1528890638.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:38.852Z,1528890638.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:39.199Z,1528890639.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:39.240Z,1528890639.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:39.603Z,1528890639.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:39.640Z,1528890639.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:40.003Z,1528890640.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:40.037Z,1528890640.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:40.404Z,1528890640.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:40.436Z,1528890640.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:40.803Z,1528890640.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:40.840Z,1528890640.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:41.221Z,1528890641.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:41.239Z,1528890641.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:41.620Z,1528890641.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:41.644Z,1528890641.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:42.019Z,1528890642.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:42.038Z,1528890642.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:42.403Z,1528890642.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:42.437Z,1528890642.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:42.804Z,1528890642.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:42.835Z,1528890642.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:43.204Z,1528890643.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:43.235Z,1528890643.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:43.603Z,1528890643.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:43.636Z,1528890643.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:44.020Z,1528890644.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:44.038Z,1528890644.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:44.422Z,1528890644.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:44.439Z,1528890644.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:44.820Z,1528890644.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:44.855Z,1528890644.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:45.199Z,1528890645.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:45.225Z,1528890645.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:45.604Z,1528890645.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:45.639Z,1528890645.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:46.003Z,1528890646.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:46.042Z,1528890646.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:46.400Z,1528890646.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:46.426Z,1528890646.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:46.803Z,1528890646.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:46.820Z,1528890646.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:47.213Z,1528890647.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:47.251Z,1528890647.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:47.618Z,1528890647.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:47.652Z,1528890647.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:48.013Z,1528890648.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:48.047Z,1528890648.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:48.407Z,1528890648.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:48.424Z,1528890648.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:48.803Z,1528890648.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:48.820Z,1528890648.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:49.204Z,1528890649.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:49.222Z,1528890649.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:49.607Z,1528890649.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:49.625Z,1528890649.625 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:49.626Z,1528890649.626 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 168
2018-06-13T11:50:49.626Z,1528890649.626 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:50:49.627Z,1528890649.627 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:49.627Z,1528890649.627 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 168
2018-06-13T11:50:49.628Z,1528890649.628 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:50:49.658Z,1528890649.658 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:49.658Z,1528890649.658 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 168
2018-06-13T11:50:49.658Z,1528890649.658 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:50:49.753Z,1528890649.753 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:50:49.753Z,1528890649.753 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:50:49.754Z,1528890649.754 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:50:50.017Z,1528890650.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:50.126Z,1528890650.126 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:50:50.126Z,1528890650.126 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 168
2018-06-13T11:50:50.126Z,1528890650.126 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:50:50.126Z,1528890650.126 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 168
2018-06-13T11:50:50.127Z,1528890650.127 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:50:50.127Z,1528890650.127 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 168
2018-06-13T11:50:50.421Z,1528890650.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:50.453Z,1528890650.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:50:50.453Z,1528890650.453 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:50:50.454Z,1528890650.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:50:50.454Z,1528890650.454 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:50:50.454Z,1528890650.454 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:50:50.455Z,1528890650.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:50:50.455Z,1528890650.455 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:50:50.455Z,1528890650.455 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:50:50.456Z,1528890650.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:50:50.810Z,1528890650.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:50.850Z,1528890650.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:50:50.851Z,1528890650.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:51.203Z,1528890651.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:51.235Z,1528890651.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:50:51.236Z,1528890651.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:51.607Z,1528890651.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:51.625Z,1528890651.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:50:51.626Z,1528890651.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:52.008Z,1528890652.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:52.026Z,1528890652.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:50:52.027Z,1528890652.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:52.410Z,1528890652.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:52.428Z,1528890652.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:50:52.430Z,1528890652.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:52.807Z,1528890652.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:52.824Z,1528890652.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:50:52.825Z,1528890652.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:53.214Z,1528890653.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:53.232Z,1528890653.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:50:53.233Z,1528890653.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:53.613Z,1528890653.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:53.631Z,1528890653.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:50:53.632Z,1528890653.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:54.013Z,1528890654.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:54.031Z,1528890654.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:50:54.032Z,1528890654.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:54.409Z,1528890654.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:54.426Z,1528890654.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:50:54.427Z,1528890654.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:54.805Z,1528890654.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:54.822Z,1528890654.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:50:54.823Z,1528890654.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:55.208Z,1528890655.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:55.233Z,1528890655.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:50:55.234Z,1528890655.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:55.605Z,1528890655.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:55.622Z,1528890655.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:50:55.623Z,1528890655.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:56.014Z,1528890656.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:56.031Z,1528890656.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:50:56.032Z,1528890656.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:56.422Z,1528890656.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:56.439Z,1528890656.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:50:56.440Z,1528890656.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:56.818Z,1528890656.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:56.835Z,1528890656.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:50:56.836Z,1528890656.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:57.207Z,1528890657.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:57.230Z,1528890657.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:50:57.231Z,1528890657.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:57.607Z,1528890657.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:57.629Z,1528890657.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:50:57.630Z,1528890657.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:58.005Z,1528890658.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:58.022Z,1528890658.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:50:58.023Z,1528890658.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:58.403Z,1528890658.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:58.426Z,1528890658.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:50:58.427Z,1528890658.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:58.807Z,1528890658.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:58.829Z,1528890658.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:50:58.830Z,1528890658.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:59.186Z,1528890659.186 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T11:50:59.187Z,1528890659.187 [NAL9602] Data Fault, FailCount= 1
2018-06-13T11:50:59.187Z,1528890659.187 [NAL9602](ERROR): Data Fault
2018-06-13T11:50:59.221Z,1528890659.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:59.238Z,1528890659.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:50:59.239Z,1528890659.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:50:59.325Z,1528890659.325 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T11:50:59.582Z,1528890659.582 [NAL9602](INFO): Powering down
2018-06-13T11:50:59.611Z,1528890659.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:50:59.628Z,1528890659.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:50:59.629Z,1528890659.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:00.008Z,1528890660.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:00.025Z,1528890660.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:51:00.026Z,1528890660.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:00.404Z,1528890660.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:00.421Z,1528890660.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:51:00.422Z,1528890660.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:00.493Z,1528890660.493 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T11:51:00.493Z,1528890660.493 [NAL9602] No Fault, FailCount= 1
2018-06-13T11:51:00.805Z,1528890660.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:00.822Z,1528890660.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:51:00.823Z,1528890660.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:01.217Z,1528890661.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:01.244Z,1528890661.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:51:01.245Z,1528890661.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:01.608Z,1528890661.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:01.625Z,1528890661.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:51:01.626Z,1528890661.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:02.004Z,1528890662.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:02.022Z,1528890662.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:51:02.023Z,1528890662.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:02.404Z,1528890662.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:02.427Z,1528890662.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:51:02.428Z,1528890662.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:02.804Z,1528890662.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:02.827Z,1528890662.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:51:02.828Z,1528890662.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:03.204Z,1528890663.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:03.228Z,1528890663.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:51:03.230Z,1528890663.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:03.608Z,1528890663.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:03.631Z,1528890663.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:51:03.632Z,1528890663.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:04.009Z,1528890664.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:04.026Z,1528890664.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:51:04.027Z,1528890664.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:04.408Z,1528890664.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:04.425Z,1528890664.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:51:04.426Z,1528890664.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:04.808Z,1528890664.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:04.825Z,1528890664.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:51:04.826Z,1528890664.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:05.208Z,1528890665.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:05.225Z,1528890665.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:51:05.226Z,1528890665.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:05.604Z,1528890665.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:05.628Z,1528890665.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:51:05.629Z,1528890665.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:06.009Z,1528890666.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:06.031Z,1528890666.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:51:06.032Z,1528890666.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:06.404Z,1528890666.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:06.421Z,1528890666.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:51:06.422Z,1528890666.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:06.804Z,1528890666.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:06.822Z,1528890666.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:51:06.823Z,1528890666.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:07.209Z,1528890667.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:07.229Z,1528890667.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:51:07.230Z,1528890667.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:07.608Z,1528890667.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:07.625Z,1528890667.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:51:07.626Z,1528890667.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:07.998Z,1528890667.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:08.032Z,1528890668.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:51:08.033Z,1528890668.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:08.407Z,1528890668.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:08.431Z,1528890668.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:51:08.432Z,1528890668.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:08.812Z,1528890668.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:08.829Z,1528890668.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:51:08.830Z,1528890668.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:09.208Z,1528890669.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:09.226Z,1528890669.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:51:09.227Z,1528890669.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:09.612Z,1528890669.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:09.629Z,1528890669.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:10.012Z,1528890670.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:10.036Z,1528890670.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:10.408Z,1528890670.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:10.426Z,1528890670.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:13.519Z,1528890673.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:13.537Z,1528890673.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:13.650Z,1528890673.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:13.714Z,1528890673.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:14.050Z,1528890674.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:14.079Z,1528890674.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:14.451Z,1528890674.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:14.478Z,1528890674.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:14.847Z,1528890674.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:14.883Z,1528890674.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:15.246Z,1528890675.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:15.273Z,1528890675.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:15.646Z,1528890675.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:15.674Z,1528890675.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:16.046Z,1528890676.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:16.074Z,1528890676.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:16.447Z,1528890676.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:16.480Z,1528890676.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:16.842Z,1528890676.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:16.880Z,1528890676.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:17.246Z,1528890677.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:17.272Z,1528890677.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:17.646Z,1528890677.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:17.674Z,1528890677.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:18.042Z,1528890678.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:18.076Z,1528890678.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:18.447Z,1528890678.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:18.474Z,1528890678.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:18.845Z,1528890678.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:18.874Z,1528890678.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:19.250Z,1528890679.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:19.278Z,1528890679.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:19.647Z,1528890679.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:19.684Z,1528890679.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:20.047Z,1528890680.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:20.081Z,1528890680.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:20.443Z,1528890680.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:20.472Z,1528890680.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:20.846Z,1528890680.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:20.884Z,1528890680.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:21.246Z,1528890681.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:21.288Z,1528890681.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:21.643Z,1528890681.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:21.685Z,1528890681.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:22.047Z,1528890682.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:22.081Z,1528890682.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:22.445Z,1528890682.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:22.468Z,1528890682.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:22.850Z,1528890682.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:22.868Z,1528890682.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:23.250Z,1528890683.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:23.297Z,1528890683.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:23.650Z,1528890683.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:23.668Z,1528890683.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:24.045Z,1528890684.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:24.063Z,1528890684.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:24.450Z,1528890684.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:24.468Z,1528890684.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:24.850Z,1528890684.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:24.867Z,1528890684.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:25.248Z,1528890685.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:25.266Z,1528890685.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:25.650Z,1528890685.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:25.668Z,1528890685.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:26.050Z,1528890686.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:26.067Z,1528890686.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:26.450Z,1528890686.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:26.468Z,1528890686.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:26.850Z,1528890686.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:26.868Z,1528890686.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:27.250Z,1528890687.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:27.268Z,1528890687.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:27.645Z,1528890687.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:27.663Z,1528890687.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:28.050Z,1528890688.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:28.067Z,1528890688.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:28.450Z,1528890688.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:28.468Z,1528890688.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:28.846Z,1528890688.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:28.868Z,1528890688.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:29.250Z,1528890689.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:29.269Z,1528890689.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:29.634Z,1528890689.634 [NAL9602](INFO): Powering up NAL9602
2018-06-13T11:51:29.651Z,1528890689.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:29.676Z,1528890689.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:30.049Z,1528890690.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:30.067Z,1528890690.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:30.450Z,1528890690.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:30.473Z,1528890690.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:30.850Z,1528890690.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:30.868Z,1528890690.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:31.253Z,1528890691.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:31.276Z,1528890691.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:31.650Z,1528890691.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:31.668Z,1528890691.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:32.050Z,1528890692.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:32.068Z,1528890692.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:32.450Z,1528890692.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:32.468Z,1528890692.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:32.848Z,1528890692.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:32.866Z,1528890692.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:33.251Z,1528890693.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:33.276Z,1528890693.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:33.650Z,1528890693.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:33.668Z,1528890693.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:34.050Z,1528890694.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:34.068Z,1528890694.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:34.450Z,1528890694.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:34.468Z,1528890694.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:34.850Z,1528890694.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:34.867Z,1528890694.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:35.248Z,1528890695.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:35.268Z,1528890695.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:35.650Z,1528890695.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:35.668Z,1528890695.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:36.050Z,1528890696.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:36.068Z,1528890696.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:36.447Z,1528890696.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:36.466Z,1528890696.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:36.852Z,1528890696.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:36.871Z,1528890696.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:37.252Z,1528890697.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:37.270Z,1528890697.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:37.648Z,1528890697.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:37.666Z,1528890697.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:38.053Z,1528890698.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:38.071Z,1528890698.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:38.448Z,1528890698.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:38.465Z,1528890698.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:38.852Z,1528890698.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:38.870Z,1528890698.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:39.252Z,1528890699.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:39.270Z,1528890699.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:39.652Z,1528890699.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:39.670Z,1528890699.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:40.052Z,1528890700.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:40.071Z,1528890700.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:40.458Z,1528890700.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:40.475Z,1528890700.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:40.830Z,1528890700.830 [NAL9602](INFO): NAL9602 initialized
2018-06-13T11:51:40.857Z,1528890700.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:40.875Z,1528890700.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:41.252Z,1528890701.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:41.270Z,1528890701.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:41.658Z,1528890701.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:41.676Z,1528890701.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:42.057Z,1528890702.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:42.076Z,1528890702.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:42.457Z,1528890702.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:42.475Z,1528890702.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:42.853Z,1528890702.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:42.871Z,1528890702.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:43.254Z,1528890703.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:43.272Z,1528890703.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:43.654Z,1528890703.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:43.672Z,1528890703.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:44.052Z,1528890704.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:44.070Z,1528890704.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:44.458Z,1528890704.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:44.476Z,1528890704.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:44.862Z,1528890704.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:44.880Z,1528890704.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:45.258Z,1528890705.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:45.275Z,1528890705.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:45.652Z,1528890705.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:45.670Z,1528890705.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:46.052Z,1528890706.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:46.070Z,1528890706.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:46.452Z,1528890706.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:46.476Z,1528890706.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:46.852Z,1528890706.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:46.871Z,1528890706.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:47.249Z,1528890707.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:47.267Z,1528890707.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:47.662Z,1528890707.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:47.679Z,1528890707.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:48.062Z,1528890708.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:48.079Z,1528890708.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:48.457Z,1528890708.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:48.475Z,1528890708.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:48.852Z,1528890708.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:48.870Z,1528890708.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:49.252Z,1528890709.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:49.270Z,1528890709.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:49.654Z,1528890709.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:49.672Z,1528890709.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:50.052Z,1528890710.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:50.070Z,1528890710.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:50.458Z,1528890710.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:50.476Z,1528890710.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:50.861Z,1528890710.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:50.879Z,1528890710.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:51.258Z,1528890711.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:51.275Z,1528890711.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:51.651Z,1528890711.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:51.676Z,1528890711.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:52.049Z,1528890712.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:52.067Z,1528890712.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:52.452Z,1528890712.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:52.470Z,1528890712.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:52.852Z,1528890712.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:52.870Z,1528890712.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:53.253Z,1528890713.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:53.271Z,1528890713.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:53.658Z,1528890713.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:53.676Z,1528890713.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:54.062Z,1528890714.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:54.079Z,1528890714.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:54.457Z,1528890714.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:54.475Z,1528890714.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:54.852Z,1528890714.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:54.870Z,1528890714.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:55.252Z,1528890715.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:55.271Z,1528890715.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:55.654Z,1528890715.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:55.672Z,1528890715.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:56.052Z,1528890716.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:56.070Z,1528890716.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:56.466Z,1528890716.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:56.484Z,1528890716.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:56.861Z,1528890716.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:56.879Z,1528890716.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:57.259Z,1528890717.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:57.284Z,1528890717.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:57.651Z,1528890717.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:57.693Z,1528890717.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:58.055Z,1528890718.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:58.072Z,1528890718.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:58.451Z,1528890718.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:58.480Z,1528890718.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:58.851Z,1528890718.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:58.882Z,1528890718.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:59.255Z,1528890719.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:59.272Z,1528890719.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:51:59.664Z,1528890719.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:51:59.682Z,1528890719.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:00.066Z,1528890720.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:00.084Z,1528890720.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:00.463Z,1528890720.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:00.485Z,1528890720.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:00.847Z,1528890720.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:00.884Z,1528890720.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:01.247Z,1528890721.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:01.281Z,1528890721.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:01.643Z,1528890721.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:01.688Z,1528890721.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:02.047Z,1528890722.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:02.083Z,1528890722.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:02.463Z,1528890722.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:02.481Z,1528890722.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:02.868Z,1528890722.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:02.886Z,1528890722.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:03.268Z,1528890723.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:03.286Z,1528890723.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:03.647Z,1528890723.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:03.683Z,1528890723.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:04.043Z,1528890724.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:04.073Z,1528890724.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:04.447Z,1528890724.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:04.477Z,1528890724.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:04.848Z,1528890724.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:04.884Z,1528890724.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:05.247Z,1528890725.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:05.281Z,1528890725.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:05.664Z,1528890725.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:05.682Z,1528890725.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:06.066Z,1528890726.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:06.084Z,1528890726.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:06.464Z,1528890726.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:06.483Z,1528890726.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:06.847Z,1528890726.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:06.883Z,1528890726.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:07.247Z,1528890727.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:07.280Z,1528890727.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:07.647Z,1528890727.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:07.680Z,1528890727.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:08.047Z,1528890728.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:08.080Z,1528890728.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:08.464Z,1528890728.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:08.482Z,1528890728.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:08.868Z,1528890728.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:08.886Z,1528890728.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:09.268Z,1528890729.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:09.285Z,1528890729.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:09.651Z,1528890729.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:09.679Z,1528890729.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:10.051Z,1528890730.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:10.081Z,1528890730.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:10.451Z,1528890730.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:10.478Z,1528890730.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:13.578Z,1528890733.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:13.596Z,1528890733.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:13.699Z,1528890733.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:13.736Z,1528890733.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:14.125Z,1528890734.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:14.143Z,1528890734.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:14.528Z,1528890734.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:14.546Z,1528890734.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:14.921Z,1528890734.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:14.939Z,1528890734.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:15.303Z,1528890735.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:15.330Z,1528890735.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:15.708Z,1528890735.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:15.736Z,1528890735.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:16.099Z,1528890736.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:16.134Z,1528890736.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:16.520Z,1528890736.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:16.544Z,1528890736.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:16.925Z,1528890736.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:16.943Z,1528890736.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:17.321Z,1528890737.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:17.344Z,1528890737.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:17.703Z,1528890737.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:17.731Z,1528890737.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:18.103Z,1528890738.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:18.133Z,1528890738.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:18.499Z,1528890738.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:18.537Z,1528890738.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:18.904Z,1528890738.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:18.934Z,1528890738.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:19.303Z,1528890739.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:19.342Z,1528890739.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:19.716Z,1528890739.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:19.740Z,1528890739.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:20.123Z,1528890740.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:20.142Z,1528890740.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:20.522Z,1528890740.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:20.548Z,1528890740.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:20.899Z,1528890740.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:20.932Z,1528890740.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:21.303Z,1528890741.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:21.336Z,1528890741.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:21.704Z,1528890741.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:21.738Z,1528890741.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:22.103Z,1528890742.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:22.120Z,1528890742.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:22.517Z,1528890742.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:22.552Z,1528890742.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:22.921Z,1528890742.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:22.951Z,1528890742.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:23.317Z,1528890743.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:23.351Z,1528890743.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:23.706Z,1528890743.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:23.728Z,1528890743.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:24.106Z,1528890744.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:24.124Z,1528890744.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:24.506Z,1528890744.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:24.524Z,1528890744.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:24.906Z,1528890744.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:24.928Z,1528890744.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:25.306Z,1528890745.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:25.324Z,1528890745.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:25.710Z,1528890745.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:25.728Z,1528890745.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:26.117Z,1528890746.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:26.135Z,1528890746.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:26.517Z,1528890746.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:26.535Z,1528890746.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:26.908Z,1528890746.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:26.925Z,1528890746.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:27.308Z,1528890747.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:27.326Z,1528890747.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:27.708Z,1528890747.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:27.738Z,1528890747.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:28.103Z,1528890748.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:28.126Z,1528890748.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:28.518Z,1528890748.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:28.535Z,1528890748.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:28.917Z,1528890748.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:28.935Z,1528890748.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:29.314Z,1528890749.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:29.336Z,1528890749.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:29.708Z,1528890749.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:29.726Z,1528890749.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:30.110Z,1528890750.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:30.127Z,1528890750.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:30.503Z,1528890750.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:30.539Z,1528890750.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:30.907Z,1528890750.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:30.938Z,1528890750.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:31.310Z,1528890751.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:31.328Z,1528890751.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:31.718Z,1528890751.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:31.740Z,1528890751.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:32.118Z,1528890752.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:32.140Z,1528890752.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:32.519Z,1528890752.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:32.544Z,1528890752.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:32.903Z,1528890752.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:32.926Z,1528890752.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:33.313Z,1528890753.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:33.331Z,1528890753.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:33.708Z,1528890753.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:33.739Z,1528890753.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:34.109Z,1528890754.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:34.126Z,1528890754.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:34.519Z,1528890754.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:34.537Z,1528890754.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:34.923Z,1528890754.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:34.941Z,1528890754.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:35.314Z,1528890755.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:35.344Z,1528890755.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:35.703Z,1528890755.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:35.739Z,1528890755.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:36.103Z,1528890756.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:36.142Z,1528890756.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:36.503Z,1528890756.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:36.530Z,1528890756.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:36.904Z,1528890756.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:36.930Z,1528890756.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:37.303Z,1528890757.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:37.333Z,1528890757.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:37.720Z,1528890757.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:37.738Z,1528890757.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:38.127Z,1528890758.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:38.145Z,1528890758.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:38.524Z,1528890758.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:38.542Z,1528890758.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:38.903Z,1528890758.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:38.930Z,1528890758.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:39.303Z,1528890759.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:39.329Z,1528890759.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:39.704Z,1528890759.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:39.740Z,1528890759.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:40.099Z,1528890760.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:40.136Z,1528890760.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:40.519Z,1528890760.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:40.537Z,1528890760.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:40.925Z,1528890760.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:40.942Z,1528890760.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:41.324Z,1528890761.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:41.348Z,1528890761.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:41.703Z,1528890761.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:41.737Z,1528890761.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:42.103Z,1528890762.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:42.142Z,1528890762.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:42.503Z,1528890762.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:42.535Z,1528890762.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:42.908Z,1528890762.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:42.940Z,1528890762.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:43.304Z,1528890763.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:43.347Z,1528890763.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:43.720Z,1528890763.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:43.738Z,1528890763.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:44.124Z,1528890764.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:44.143Z,1528890764.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:44.525Z,1528890764.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:44.543Z,1528890764.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:44.900Z,1528890764.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:44.945Z,1528890764.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:45.303Z,1528890765.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:45.336Z,1528890765.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:45.704Z,1528890765.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:45.738Z,1528890765.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:46.103Z,1528890766.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:46.136Z,1528890766.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:46.523Z,1528890766.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:46.542Z,1528890766.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:46.925Z,1528890766.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:46.943Z,1528890766.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:47.310Z,1528890767.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:47.343Z,1528890767.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:47.703Z,1528890767.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:47.736Z,1528890767.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:48.103Z,1528890768.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:48.142Z,1528890768.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:48.503Z,1528890768.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:48.540Z,1528890768.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:48.904Z,1528890768.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:48.929Z,1528890768.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:49.303Z,1528890769.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:49.344Z,1528890769.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:49.717Z,1528890769.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:49.751Z,1528890769.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:50.121Z,1528890770.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:50.148Z,1528890770.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:50.517Z,1528890770.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:50.551Z,1528890770.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:50.906Z,1528890770.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:50.923Z,1528890770.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:51.306Z,1528890771.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:51.328Z,1528890771.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:51.707Z,1528890771.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:51.732Z,1528890771.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:52.106Z,1528890772.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:52.124Z,1528890772.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:52.521Z,1528890772.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:52.547Z,1528890772.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:52.917Z,1528890772.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:52.935Z,1528890772.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:53.309Z,1528890773.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:53.327Z,1528890773.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:53.709Z,1528890773.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:53.727Z,1528890773.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:54.110Z,1528890774.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:54.128Z,1528890774.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:54.503Z,1528890774.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:54.527Z,1528890774.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:54.910Z,1528890774.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:54.928Z,1528890774.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:55.303Z,1528890775.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:55.328Z,1528890775.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:55.717Z,1528890775.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:55.735Z,1528890775.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:56.117Z,1528890776.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:56.135Z,1528890776.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:56.518Z,1528890776.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:56.536Z,1528890776.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:56.904Z,1528890776.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:56.927Z,1528890776.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:57.308Z,1528890777.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:57.340Z,1528890777.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:57.706Z,1528890777.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:57.725Z,1528890777.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:58.099Z,1528890778.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:58.138Z,1528890778.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:58.523Z,1528890778.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:58.548Z,1528890778.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:58.924Z,1528890778.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:58.942Z,1528890778.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:59.309Z,1528890779.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:59.338Z,1528890779.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:52:59.703Z,1528890779.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:52:59.736Z,1528890779.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:00.103Z,1528890780.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:00.156Z,1528890780.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:00.499Z,1528890780.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:00.532Z,1528890780.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:00.904Z,1528890780.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:00.934Z,1528890780.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:01.303Z,1528890781.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:01.320Z,1528890781.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:01.713Z,1528890781.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:01.747Z,1528890781.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:02.117Z,1528890782.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:02.144Z,1528890782.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:02.513Z,1528890782.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:02.551Z,1528890782.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:02.903Z,1528890782.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:02.920Z,1528890782.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:03.307Z,1528890783.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:03.325Z,1528890783.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:03.706Z,1528890783.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:03.724Z,1528890783.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:04.102Z,1528890784.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:04.120Z,1528890784.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:04.517Z,1528890784.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:04.551Z,1528890784.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:04.913Z,1528890784.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:04.930Z,1528890784.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:05.317Z,1528890785.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:05.356Z,1528890785.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:05.708Z,1528890785.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:05.725Z,1528890785.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:06.110Z,1528890786.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:06.127Z,1528890786.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:06.507Z,1528890786.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:06.533Z,1528890786.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:06.913Z,1528890786.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:06.931Z,1528890786.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:07.305Z,1528890787.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:07.323Z,1528890787.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:07.718Z,1528890787.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:07.736Z,1528890787.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:08.118Z,1528890788.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:08.135Z,1528890788.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:08.518Z,1528890788.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:08.536Z,1528890788.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:08.909Z,1528890788.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:08.927Z,1528890788.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:09.313Z,1528890789.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:09.330Z,1528890789.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:12.430Z,1528890792.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:12.448Z,1528890792.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:12.479Z,1528890792.479 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T11:48:12.1Z
2018-06-13T11:53:12.479Z,1528890792.479 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T11:53:12.480Z,1528890792.480 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T11:53:12.599Z,1528890792.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:12.641Z,1528890792.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:13.773Z,1528890793.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:13.791Z,1528890793.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:13.917Z,1528890793.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:13.952Z,1528890793.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:14.317Z,1528890794.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:14.334Z,1528890794.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:14.696Z,1528890794.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:14.732Z,1528890794.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:15.095Z,1528890795.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:15.129Z,1528890795.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:15.499Z,1528890795.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:15.533Z,1528890795.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:15.900Z,1528890795.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:15.919Z,1528890795.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:19.007Z,1528890799.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:19.041Z,1528890799.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:19.147Z,1528890799.147 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180613T032335/Courier0196.lzma
2018-06-13T11:53:19.196Z,1528890799.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:19.244Z,1528890799.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:19.588Z,1528890799.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:19.606Z,1528890799.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:19.942Z,1528890799.942 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0196.lzma.bak
2018-06-13T11:53:19.942Z,1528890799.942 [DataOverHttps](INFO): SBD MOMSN=8329173
2018-06-13T11:53:19.998Z,1528890799.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:20.024Z,1528890800.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:21.864Z,1528890801.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:21.906Z,1528890801.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:22.015Z,1528890802.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:22.056Z,1528890802.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:25.157Z,1528890805.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:25.205Z,1528890805.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:25.334Z,1528890805.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:25.360Z,1528890805.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:25.740Z,1528890805.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:25.764Z,1528890805.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:26.128Z,1528890806.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:26.156Z,1528890806.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:26.520Z,1528890806.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:26.564Z,1528890806.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:26.924Z,1528890806.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:26.951Z,1528890806.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:30.036Z,1528890810.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:30.054Z,1528890810.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:30.149Z,1528890810.149 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0197.lzma
2018-06-13T11:53:30.186Z,1528890810.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:30.228Z,1528890810.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:30.597Z,1528890810.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:30.615Z,1528890810.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:30.950Z,1528890810.950 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0197.lzma.bak
2018-06-13T11:53:30.950Z,1528890810.950 [DataOverHttps](INFO): SBD MOMSN=8329175
2018-06-13T11:53:31.004Z,1528890811.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:31.034Z,1528890811.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:32.862Z,1528890812.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:32.888Z,1528890812.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:32.913Z,1528890812.913 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T11:53:32.913Z,1528890812.913 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T11:53:32.913Z,1528890812.913 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T11:53:33.023Z,1528890813.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:33.063Z,1528890813.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:33.434Z,1528890813.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:33.458Z,1528890813.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:36.550Z,1528890816.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:36.568Z,1528890816.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:36.706Z,1528890816.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:36.734Z,1528890816.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:37.086Z,1528890817.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:37.112Z,1528890817.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:37.485Z,1528890817.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:37.503Z,1528890817.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:37.884Z,1528890817.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:37.916Z,1528890817.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:38.283Z,1528890818.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:38.307Z,1528890818.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:38.695Z,1528890818.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:38.712Z,1528890818.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:39.094Z,1528890819.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:39.113Z,1528890819.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:39.495Z,1528890819.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:39.512Z,1528890819.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:39.882Z,1528890819.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:39.900Z,1528890819.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:40.283Z,1528890820.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:40.306Z,1528890820.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:40.684Z,1528890820.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:40.715Z,1528890820.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:41.085Z,1528890821.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:41.103Z,1528890821.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:41.495Z,1528890821.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:41.520Z,1528890821.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:41.900Z,1528890821.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:41.924Z,1528890821.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:42.295Z,1528890822.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:42.313Z,1528890822.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:42.683Z,1528890822.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:42.708Z,1528890822.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:43.083Z,1528890823.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:43.118Z,1528890823.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:43.495Z,1528890823.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:43.513Z,1528890823.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:43.899Z,1528890823.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:43.917Z,1528890823.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:44.299Z,1528890824.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:44.317Z,1528890824.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:44.677Z,1528890824.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:44.712Z,1528890824.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:45.079Z,1528890825.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:45.113Z,1528890825.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:45.500Z,1528890825.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:45.518Z,1528890825.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:45.899Z,1528890825.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:45.917Z,1528890825.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:46.295Z,1528890826.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:46.313Z,1528890826.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:46.681Z,1528890826.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:46.710Z,1528890826.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:47.079Z,1528890827.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:47.106Z,1528890827.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:47.495Z,1528890827.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:47.513Z,1528890827.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:47.900Z,1528890827.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:47.918Z,1528890827.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:48.295Z,1528890828.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:48.313Z,1528890828.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:48.678Z,1528890828.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:48.706Z,1528890828.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:49.079Z,1528890829.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:49.108Z,1528890829.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:49.496Z,1528890829.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:49.514Z,1528890829.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:49.899Z,1528890829.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:49.917Z,1528890829.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:50.300Z,1528890830.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:50.319Z,1528890830.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:50.679Z,1528890830.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:50.707Z,1528890830.707 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:50.707Z,1528890830.707 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 169
2018-06-13T11:53:50.707Z,1528890830.707 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:53:50.709Z,1528890830.709 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:50.709Z,1528890830.709 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 169
2018-06-13T11:53:50.709Z,1528890830.709 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:53:50.711Z,1528890830.711 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:50.711Z,1528890830.711 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 169
2018-06-13T11:53:50.711Z,1528890830.711 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:53:50.789Z,1528890830.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:53:50.789Z,1528890830.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:53:50.790Z,1528890830.790 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:53:51.087Z,1528890831.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:51.202Z,1528890831.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:53:51.202Z,1528890831.202 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 169
2018-06-13T11:53:51.202Z,1528890831.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:53:51.202Z,1528890831.202 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 169
2018-06-13T11:53:51.203Z,1528890831.203 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:53:51.203Z,1528890831.203 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 169
2018-06-13T11:53:51.493Z,1528890831.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:51.522Z,1528890831.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:53:51.523Z,1528890831.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:53:51.523Z,1528890831.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:53:51.523Z,1528890831.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:53:51.524Z,1528890831.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:53:51.524Z,1528890831.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:53:51.524Z,1528890831.524 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:53:51.525Z,1528890831.525 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:53:51.525Z,1528890831.525 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:53:51.901Z,1528890831.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:51.926Z,1528890831.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:53:51.927Z,1528890831.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:52.286Z,1528890832.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:52.303Z,1528890832.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:53:52.304Z,1528890832.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:52.683Z,1528890832.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:52.701Z,1528890832.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:53:52.702Z,1528890832.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:53.083Z,1528890833.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:53.100Z,1528890833.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:53:53.101Z,1528890833.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:53.495Z,1528890833.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:53.528Z,1528890833.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:53:53.529Z,1528890833.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:53.894Z,1528890833.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:53.912Z,1528890833.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:53:53.912Z,1528890833.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:54.287Z,1528890834.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:54.304Z,1528890834.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:53:54.305Z,1528890834.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:54.683Z,1528890834.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:54.701Z,1528890834.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:53:54.702Z,1528890834.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:55.085Z,1528890835.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:55.103Z,1528890835.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:53:55.104Z,1528890835.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:55.490Z,1528890835.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:55.509Z,1528890835.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:53:55.510Z,1528890835.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:55.893Z,1528890835.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:55.911Z,1528890835.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:53:55.912Z,1528890835.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:56.294Z,1528890836.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:56.312Z,1528890836.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:53:56.313Z,1528890836.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:56.682Z,1528890836.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:56.700Z,1528890836.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:53:56.701Z,1528890836.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:57.099Z,1528890837.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:57.171Z,1528890837.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T11:53:57.172Z,1528890837.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:57.502Z,1528890837.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:57.583Z,1528890837.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T11:53:57.584Z,1528890837.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:57.894Z,1528890837.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:58.183Z,1528890838.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T11:53:58.184Z,1528890838.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:58.320Z,1528890838.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:58.377Z,1528890838.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T11:53:58.378Z,1528890838.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:58.704Z,1528890838.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:58.732Z,1528890838.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:53:58.734Z,1528890838.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:59.103Z,1528890839.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:59.136Z,1528890839.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:53:59.138Z,1528890839.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:59.527Z,1528890839.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:59.546Z,1528890839.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:53:59.547Z,1528890839.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:53:59.925Z,1528890839.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:53:59.942Z,1528890839.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:53:59.943Z,1528890839.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:00.318Z,1528890840.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:00.350Z,1528890840.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:54:00.351Z,1528890840.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:00.704Z,1528890840.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:00.744Z,1528890840.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:54:00.745Z,1528890840.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:01.103Z,1528890841.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:01.131Z,1528890841.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:54:01.132Z,1528890841.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:01.513Z,1528890841.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:01.536Z,1528890841.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:54:01.537Z,1528890841.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:01.923Z,1528890841.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:01.940Z,1528890841.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:54:01.942Z,1528890841.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:02.324Z,1528890842.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:02.342Z,1528890842.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:54:02.343Z,1528890842.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:02.704Z,1528890842.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:02.738Z,1528890842.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:54:02.739Z,1528890842.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:03.103Z,1528890843.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:03.130Z,1528890843.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:54:03.131Z,1528890843.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:03.524Z,1528890843.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:03.542Z,1528890843.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:54:03.543Z,1528890843.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:03.923Z,1528890843.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:03.941Z,1528890843.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:54:03.942Z,1528890843.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:04.319Z,1528890844.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:04.337Z,1528890844.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:54:04.338Z,1528890844.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:04.704Z,1528890844.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:04.740Z,1528890844.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:54:04.745Z,1528890844.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:05.104Z,1528890845.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:05.141Z,1528890845.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:54:05.142Z,1528890845.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:05.517Z,1528890845.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:05.544Z,1528890845.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:54:05.545Z,1528890845.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:05.917Z,1528890845.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:05.946Z,1528890845.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:54:05.947Z,1528890845.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:06.314Z,1528890846.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:06.340Z,1528890846.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:54:06.341Z,1528890846.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:06.703Z,1528890846.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:06.737Z,1528890846.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:54:06.738Z,1528890846.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:07.103Z,1528890847.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:07.141Z,1528890847.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:54:07.142Z,1528890847.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:07.517Z,1528890847.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:07.555Z,1528890847.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:54:07.556Z,1528890847.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:07.917Z,1528890847.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:07.950Z,1528890847.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:54:07.951Z,1528890847.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:08.317Z,1528890848.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:08.335Z,1528890848.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:54:08.336Z,1528890848.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:08.708Z,1528890848.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:08.726Z,1528890848.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:54:08.727Z,1528890848.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:09.108Z,1528890849.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:09.125Z,1528890849.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:54:09.126Z,1528890849.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:09.517Z,1528890849.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:09.535Z,1528890849.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:54:09.536Z,1528890849.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:09.917Z,1528890849.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:09.935Z,1528890849.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:54:09.936Z,1528890849.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:10.313Z,1528890850.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:10.331Z,1528890850.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:54:10.332Z,1528890850.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:10.708Z,1528890850.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:10.745Z,1528890850.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:11.109Z,1528890851.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:11.126Z,1528890851.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:11.518Z,1528890851.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:11.536Z,1528890851.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:11.919Z,1528890851.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:11.937Z,1528890851.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:12.317Z,1528890852.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:12.335Z,1528890852.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:12.707Z,1528890852.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:12.731Z,1528890852.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:13.107Z,1528890853.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:13.131Z,1528890853.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:13.518Z,1528890853.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:13.536Z,1528890853.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:13.918Z,1528890853.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:13.936Z,1528890853.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:14.319Z,1528890854.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:14.336Z,1528890854.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:14.710Z,1528890854.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:14.732Z,1528890854.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:15.107Z,1528890855.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:15.129Z,1528890855.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:15.519Z,1528890855.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:15.537Z,1528890855.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:15.918Z,1528890855.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:15.940Z,1528890855.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:16.318Z,1528890856.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:16.335Z,1528890856.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:16.708Z,1528890856.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:16.744Z,1528890856.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:17.109Z,1528890857.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:17.127Z,1528890857.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:17.519Z,1528890857.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:17.537Z,1528890857.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:17.924Z,1528890857.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:17.942Z,1528890857.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:18.315Z,1528890858.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:18.333Z,1528890858.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:18.707Z,1528890858.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:18.731Z,1528890858.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:19.115Z,1528890859.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:19.132Z,1528890859.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:19.510Z,1528890859.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:19.528Z,1528890859.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:19.919Z,1528890859.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:19.937Z,1528890859.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:20.323Z,1528890860.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:20.341Z,1528890860.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:20.720Z,1528890860.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:20.738Z,1528890860.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:21.107Z,1528890861.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:21.131Z,1528890861.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:21.511Z,1528890861.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:21.535Z,1528890861.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:21.910Z,1528890861.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:21.928Z,1528890861.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:22.307Z,1528890862.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:22.341Z,1528890862.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:22.725Z,1528890862.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:22.743Z,1528890862.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:23.118Z,1528890863.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:23.144Z,1528890863.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:23.520Z,1528890863.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:23.544Z,1528890863.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:23.907Z,1528890863.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:23.937Z,1528890863.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:24.303Z,1528890864.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:24.330Z,1528890864.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:24.703Z,1528890864.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:24.732Z,1528890864.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:25.104Z,1528890865.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:25.140Z,1528890865.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:25.499Z,1528890865.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:25.537Z,1528890865.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:25.920Z,1528890865.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:25.937Z,1528890865.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:26.325Z,1528890866.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:26.343Z,1528890866.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:26.719Z,1528890866.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:26.737Z,1528890866.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:27.103Z,1528890867.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:27.136Z,1528890867.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:27.503Z,1528890867.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:27.532Z,1528890867.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:27.904Z,1528890867.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:27.931Z,1528890867.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:28.303Z,1528890868.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:28.331Z,1528890868.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:28.724Z,1528890868.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:28.742Z,1528890868.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:29.123Z,1528890869.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:29.141Z,1528890869.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:29.519Z,1528890869.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:29.537Z,1528890869.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:29.899Z,1528890869.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:29.928Z,1528890869.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:30.303Z,1528890870.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:30.340Z,1528890870.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:30.703Z,1528890870.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:30.740Z,1528890870.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:31.108Z,1528890871.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:31.141Z,1528890871.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:31.503Z,1528890871.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:31.536Z,1528890871.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:31.913Z,1528890871.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:31.941Z,1528890871.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:32.317Z,1528890872.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:32.347Z,1528890872.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:32.713Z,1528890872.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:32.741Z,1528890872.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:33.108Z,1528890873.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:33.142Z,1528890873.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:33.508Z,1528890873.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:33.542Z,1528890873.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:36.615Z,1528890876.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:36.651Z,1528890876.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:36.767Z,1528890876.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:36.800Z,1528890876.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:37.169Z,1528890877.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:37.194Z,1528890877.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:37.573Z,1528890877.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:37.599Z,1528890877.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:37.966Z,1528890877.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:38.001Z,1528890878.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:38.359Z,1528890878.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:38.394Z,1528890878.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:38.760Z,1528890878.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:38.779Z,1528890878.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:39.160Z,1528890879.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:39.178Z,1528890879.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:39.570Z,1528890879.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:39.608Z,1528890879.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:39.966Z,1528890879.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:39.983Z,1528890879.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:40.370Z,1528890880.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:40.408Z,1528890880.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:40.761Z,1528890880.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:40.780Z,1528890880.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:41.155Z,1528890881.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:41.179Z,1528890881.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:41.565Z,1528890881.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:41.584Z,1528890881.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:41.969Z,1528890881.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:41.987Z,1528890881.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:42.362Z,1528890882.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:42.380Z,1528890882.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:42.760Z,1528890882.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:42.780Z,1528890882.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:43.157Z,1528890883.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:43.175Z,1528890883.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:43.562Z,1528890883.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:43.580Z,1528890883.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:43.969Z,1528890883.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:43.992Z,1528890883.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:44.369Z,1528890884.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:44.392Z,1528890884.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:44.762Z,1528890884.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:44.780Z,1528890884.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:45.159Z,1528890885.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:45.181Z,1528890885.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:45.566Z,1528890885.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:45.584Z,1528890885.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:45.967Z,1528890885.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:45.984Z,1528890885.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:46.366Z,1528890886.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:46.390Z,1528890886.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:46.761Z,1528890886.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:46.779Z,1528890886.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:47.155Z,1528890887.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:47.187Z,1528890887.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:47.566Z,1528890887.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:47.588Z,1528890887.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:47.966Z,1528890887.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:47.985Z,1528890887.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:48.366Z,1528890888.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:48.384Z,1528890888.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:48.765Z,1528890888.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:48.783Z,1528890888.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:49.161Z,1528890889.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:49.179Z,1528890889.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:49.566Z,1528890889.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:49.584Z,1528890889.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:49.969Z,1528890889.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:50.013Z,1528890890.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:50.366Z,1528890890.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:50.384Z,1528890890.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:50.763Z,1528890890.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:50.781Z,1528890890.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:51.160Z,1528890891.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:51.178Z,1528890891.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:51.569Z,1528890891.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:51.587Z,1528890891.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:51.966Z,1528890891.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:51.988Z,1528890891.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:52.366Z,1528890892.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:52.388Z,1528890892.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:52.761Z,1528890892.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:52.780Z,1528890892.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:53.162Z,1528890893.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:53.180Z,1528890893.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:53.559Z,1528890893.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:53.593Z,1528890893.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:53.970Z,1528890893.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:53.988Z,1528890893.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:54.370Z,1528890894.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:54.392Z,1528890894.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:54.770Z,1528890894.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:54.789Z,1528890894.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:55.158Z,1528890895.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:55.175Z,1528890895.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:55.562Z,1528890895.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:55.580Z,1528890895.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:55.961Z,1528890895.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:55.979Z,1528890895.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:56.361Z,1528890896.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:56.379Z,1528890896.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:56.770Z,1528890896.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:56.792Z,1528890896.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:57.170Z,1528890897.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:57.192Z,1528890897.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:57.572Z,1528890897.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:57.590Z,1528890897.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:57.961Z,1528890897.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:57.979Z,1528890897.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:58.359Z,1528890898.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:58.382Z,1528890898.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:58.762Z,1528890898.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:58.779Z,1528890898.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:59.162Z,1528890899.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:59.179Z,1528890899.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:59.559Z,1528890899.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:59.582Z,1528890899.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:54:59.970Z,1528890899.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:54:59.988Z,1528890899.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:00.371Z,1528890900.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:00.396Z,1528890900.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:00.771Z,1528890900.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:00.796Z,1528890900.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:01.162Z,1528890901.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:01.180Z,1528890901.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:01.561Z,1528890901.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:01.580Z,1528890901.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:01.959Z,1528890901.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:01.983Z,1528890901.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:02.362Z,1528890902.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:02.380Z,1528890902.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:02.770Z,1528890902.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:02.796Z,1528890902.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:03.173Z,1528890903.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:03.191Z,1528890903.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:03.571Z,1528890903.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:03.596Z,1528890903.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:03.962Z,1528890903.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:03.980Z,1528890903.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:04.359Z,1528890904.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:04.395Z,1528890904.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:04.758Z,1528890904.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:04.776Z,1528890904.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:05.163Z,1528890905.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:05.180Z,1528890905.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:05.559Z,1528890905.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:05.583Z,1528890905.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:05.971Z,1528890905.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:05.996Z,1528890905.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:06.371Z,1528890906.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:06.396Z,1528890906.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:06.770Z,1528890906.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:06.788Z,1528890906.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:07.163Z,1528890907.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:07.181Z,1528890907.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:07.561Z,1528890907.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:07.579Z,1528890907.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:07.959Z,1528890907.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:07.983Z,1528890907.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:08.359Z,1528890908.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:08.383Z,1528890908.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:08.770Z,1528890908.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:08.796Z,1528890908.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:09.170Z,1528890909.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:09.197Z,1528890909.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:09.570Z,1528890909.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:09.592Z,1528890909.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:09.961Z,1528890909.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:09.980Z,1528890909.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:10.359Z,1528890910.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:10.382Z,1528890910.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:10.762Z,1528890910.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:10.785Z,1528890910.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:11.161Z,1528890911.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:11.180Z,1528890911.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:11.559Z,1528890911.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:11.593Z,1528890911.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:11.980Z,1528890911.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:11.998Z,1528890911.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:12.375Z,1528890912.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:12.393Z,1528890912.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:12.771Z,1528890912.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:12.796Z,1528890912.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:13.155Z,1528890913.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:13.184Z,1528890913.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:13.555Z,1528890913.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:13.582Z,1528890913.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:13.956Z,1528890913.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:13.985Z,1528890913.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:14.355Z,1528890914.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:14.384Z,1528890914.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:14.772Z,1528890914.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:14.790Z,1528890914.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:15.179Z,1528890915.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:15.197Z,1528890915.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:15.577Z,1528890915.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:15.595Z,1528890915.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:15.955Z,1528890915.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:15.984Z,1528890915.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:16.355Z,1528890916.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:16.383Z,1528890916.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:16.752Z,1528890916.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:16.792Z,1528890916.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:17.156Z,1528890917.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:17.192Z,1528890917.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:17.555Z,1528890917.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:17.597Z,1528890917.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:17.974Z,1528890917.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:18.000Z,1528890918.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:18.366Z,1528890918.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:18.393Z,1528890918.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:18.770Z,1528890918.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:18.798Z,1528890918.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:19.155Z,1528890919.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:19.189Z,1528890919.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:19.555Z,1528890919.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:19.572Z,1528890919.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:19.956Z,1528890919.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:19.995Z,1528890919.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:20.358Z,1528890920.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:20.376Z,1528890920.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:20.762Z,1528890920.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:20.780Z,1528890920.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:21.169Z,1528890921.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:21.203Z,1528890921.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:21.569Z,1528890921.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:21.587Z,1528890921.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:21.960Z,1528890921.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:21.977Z,1528890921.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:22.360Z,1528890922.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:22.377Z,1528890922.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:22.762Z,1528890922.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:22.780Z,1528890922.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:23.155Z,1528890923.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:23.187Z,1528890923.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:23.560Z,1528890923.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:23.578Z,1528890923.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:23.969Z,1528890923.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:23.988Z,1528890923.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:24.369Z,1528890924.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:24.387Z,1528890924.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:24.766Z,1528890924.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:24.789Z,1528890924.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:25.159Z,1528890925.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:25.192Z,1528890925.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:25.555Z,1528890925.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:25.579Z,1528890925.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:25.959Z,1528890925.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:25.984Z,1528890925.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:26.359Z,1528890926.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:26.384Z,1528890926.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:26.771Z,1528890926.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:26.789Z,1528890926.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:27.170Z,1528890927.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:27.192Z,1528890927.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:27.572Z,1528890927.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:27.590Z,1528890927.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:27.954Z,1528890927.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:27.986Z,1528890927.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:28.359Z,1528890928.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:28.390Z,1528890928.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:28.762Z,1528890928.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:28.779Z,1528890928.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:29.162Z,1528890929.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:29.180Z,1528890929.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:29.559Z,1528890929.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:29.582Z,1528890929.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:29.971Z,1528890929.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:29.989Z,1528890929.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:30.371Z,1528890930.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:30.389Z,1528890930.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:30.770Z,1528890930.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:30.787Z,1528890930.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:31.162Z,1528890931.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:31.179Z,1528890931.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:31.561Z,1528890931.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:31.578Z,1528890931.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:31.959Z,1528890931.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:31.982Z,1528890931.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:32.359Z,1528890932.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:32.385Z,1528890932.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:32.767Z,1528890932.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:32.785Z,1528890932.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:33.170Z,1528890933.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:33.192Z,1528890933.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:33.573Z,1528890933.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:33.592Z,1528890933.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:33.965Z,1528890933.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:33.982Z,1528890933.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:34.365Z,1528890934.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:34.383Z,1528890934.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:34.766Z,1528890934.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:34.784Z,1528890934.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:37.866Z,1528890937.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:37.884Z,1528890937.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:38.022Z,1528890938.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:38.040Z,1528890938.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:38.433Z,1528890938.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:38.471Z,1528890938.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:38.834Z,1528890938.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:38.851Z,1528890938.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:39.228Z,1528890939.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:39.250Z,1528890939.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:39.622Z,1528890939.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:39.640Z,1528890939.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:40.022Z,1528890940.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:40.039Z,1528890940.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:40.419Z,1528890940.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:40.449Z,1528890940.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:40.835Z,1528890940.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:40.853Z,1528890940.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:41.235Z,1528890941.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:41.252Z,1528890941.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:41.630Z,1528890941.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:41.652Z,1528890941.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:42.022Z,1528890942.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:42.040Z,1528890942.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:42.421Z,1528890942.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:42.438Z,1528890942.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:42.819Z,1528890942.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:42.842Z,1528890942.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:43.224Z,1528890943.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:43.242Z,1528890943.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:43.621Z,1528890943.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:43.639Z,1528890943.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:44.031Z,1528890944.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:44.049Z,1528890944.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:44.435Z,1528890944.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:44.453Z,1528890944.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:44.831Z,1528890944.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:44.856Z,1528890944.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:45.220Z,1528890945.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:45.239Z,1528890945.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:45.622Z,1528890945.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:45.640Z,1528890945.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:46.022Z,1528890946.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:46.044Z,1528890946.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:46.421Z,1528890946.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:46.439Z,1528890946.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:46.836Z,1528890946.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:46.854Z,1528890946.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:47.232Z,1528890947.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:47.256Z,1528890947.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:47.631Z,1528890947.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:47.648Z,1528890947.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:48.027Z,1528890948.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:48.045Z,1528890948.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:48.422Z,1528890948.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:48.440Z,1528890948.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:48.821Z,1528890948.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:48.839Z,1528890948.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:49.223Z,1528890949.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:49.246Z,1528890949.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:49.611Z,1528890949.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:49.647Z,1528890949.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:50.030Z,1528890950.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:50.060Z,1528890950.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:50.437Z,1528890950.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:50.455Z,1528890950.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:50.828Z,1528890950.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:50.846Z,1528890950.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:51.215Z,1528890951.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:51.252Z,1528890951.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:51.615Z,1528890951.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:51.654Z,1528890951.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:52.016Z,1528890952.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:52.044Z,1528890952.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:52.415Z,1528890952.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:52.442Z,1528890952.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:52.837Z,1528890952.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:52.860Z,1528890952.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:53.235Z,1528890953.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:53.254Z,1528890953.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:53.621Z,1528890953.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:53.655Z,1528890953.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:54.015Z,1528890954.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:54.050Z,1528890954.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:54.415Z,1528890954.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:54.448Z,1528890954.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:54.815Z,1528890954.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:54.849Z,1528890954.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:55.216Z,1528890955.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:55.256Z,1528890955.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:55.619Z,1528890955.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:55.636Z,1528890955.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:56.029Z,1528890956.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:56.063Z,1528890956.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:56.433Z,1528890956.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:56.467Z,1528890956.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:56.827Z,1528890956.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:56.844Z,1528890956.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:57.220Z,1528890957.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:57.238Z,1528890957.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:57.620Z,1528890957.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:57.646Z,1528890957.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:58.019Z,1528890958.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:58.052Z,1528890958.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:58.421Z,1528890958.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:58.438Z,1528890958.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:58.830Z,1528890958.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:58.848Z,1528890958.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:59.227Z,1528890959.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:59.253Z,1528890959.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:55:59.630Z,1528890959.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:55:59.648Z,1528890959.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:00.026Z,1528890960.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:00.044Z,1528890960.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:00.423Z,1528890960.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:00.448Z,1528890960.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:00.819Z,1528890960.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:00.842Z,1528890960.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:01.223Z,1528890961.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:01.241Z,1528890961.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:01.623Z,1528890961.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:01.645Z,1528890961.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:02.031Z,1528890962.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:02.048Z,1528890962.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:02.432Z,1528890962.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:02.450Z,1528890962.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:02.831Z,1528890962.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:02.849Z,1528890962.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:03.219Z,1528890963.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:03.243Z,1528890963.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:03.622Z,1528890963.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:03.641Z,1528890963.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:04.021Z,1528890964.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:04.040Z,1528890964.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:04.425Z,1528890964.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:04.443Z,1528890964.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:04.831Z,1528890964.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:04.856Z,1528890964.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:05.230Z,1528890965.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:05.253Z,1528890965.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:05.633Z,1528890965.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:05.672Z,1528890965.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:06.019Z,1528890966.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:06.037Z,1528890966.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:06.419Z,1528890966.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:06.436Z,1528890966.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:06.818Z,1528890966.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:06.835Z,1528890966.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:07.219Z,1528890967.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:07.236Z,1528890967.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:07.618Z,1528890967.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:07.636Z,1528890967.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:08.029Z,1528890968.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:08.063Z,1528890968.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:08.430Z,1528890968.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:08.471Z,1528890968.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:08.830Z,1528890968.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:08.847Z,1528890968.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:09.220Z,1528890969.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:09.238Z,1528890969.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:09.621Z,1528890969.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:09.639Z,1528890969.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:10.020Z,1528890970.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:10.038Z,1528890970.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:10.420Z,1528890970.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:10.437Z,1528890970.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:10.829Z,1528890970.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:10.847Z,1528890970.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:11.229Z,1528890971.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:11.247Z,1528890971.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:11.626Z,1528890971.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:11.648Z,1528890971.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:12.022Z,1528890972.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:12.039Z,1528890972.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:12.421Z,1528890972.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:12.438Z,1528890972.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:12.819Z,1528890972.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:12.841Z,1528890972.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:13.224Z,1528890973.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:13.243Z,1528890973.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:13.621Z,1528890973.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:13.638Z,1528890973.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:14.026Z,1528890974.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:14.048Z,1528890974.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:14.429Z,1528890974.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:14.447Z,1528890974.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:14.826Z,1528890974.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:14.848Z,1528890974.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:15.220Z,1528890975.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:15.239Z,1528890975.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:15.622Z,1528890975.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:15.640Z,1528890975.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:16.022Z,1528890976.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:16.040Z,1528890976.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:16.424Z,1528890976.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:16.442Z,1528890976.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:16.826Z,1528890976.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:16.844Z,1528890976.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:17.230Z,1528890977.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:17.252Z,1528890977.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:17.630Z,1528890977.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:17.648Z,1528890977.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:18.022Z,1528890978.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:18.054Z,1528890978.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:18.415Z,1528890978.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:18.438Z,1528890978.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:18.819Z,1528890978.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:18.842Z,1528890978.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:19.222Z,1528890979.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:19.240Z,1528890979.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:19.621Z,1528890979.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:19.639Z,1528890979.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:20.030Z,1528890980.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:20.048Z,1528890980.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:20.429Z,1528890980.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:20.459Z,1528890980.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:20.831Z,1528890980.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:20.849Z,1528890980.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:21.219Z,1528890981.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:21.242Z,1528890981.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:21.622Z,1528890981.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:21.640Z,1528890981.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:22.022Z,1528890982.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:22.039Z,1528890982.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:22.420Z,1528890982.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:22.438Z,1528890982.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:22.836Z,1528890982.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:22.854Z,1528890982.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:23.234Z,1528890983.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:23.259Z,1528890983.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:23.630Z,1528890983.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:23.652Z,1528890983.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:24.022Z,1528890984.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:24.040Z,1528890984.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:24.421Z,1528890984.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:24.438Z,1528890984.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:24.821Z,1528890984.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:24.844Z,1528890984.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:25.223Z,1528890985.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:25.241Z,1528890985.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:25.622Z,1528890985.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:25.647Z,1528890985.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:26.031Z,1528890986.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:26.049Z,1528890986.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:26.435Z,1528890986.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:26.453Z,1528890986.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:26.831Z,1528890986.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:26.850Z,1528890986.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:27.225Z,1528890987.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:27.243Z,1528890987.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:27.620Z,1528890987.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:27.655Z,1528890987.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:28.022Z,1528890988.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:28.040Z,1528890988.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:28.421Z,1528890988.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:28.447Z,1528890988.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:28.835Z,1528890988.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:28.861Z,1528890988.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:29.235Z,1528890989.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:29.260Z,1528890989.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:29.633Z,1528890989.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:29.650Z,1528890989.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:30.022Z,1528890990.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:30.040Z,1528890990.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:30.426Z,1528890990.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:30.448Z,1528890990.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:30.819Z,1528890990.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:30.843Z,1528890990.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:31.222Z,1528890991.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:31.254Z,1528890991.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:31.621Z,1528890991.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:31.640Z,1528890991.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:32.034Z,1528890992.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:32.056Z,1528890992.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:32.435Z,1528890992.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:32.454Z,1528890992.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:32.831Z,1528890992.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:32.850Z,1528890992.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:33.225Z,1528890993.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:33.243Z,1528890993.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:33.630Z,1528890993.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:33.648Z,1528890993.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:34.026Z,1528890994.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:34.044Z,1528890994.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:34.426Z,1528890994.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:34.443Z,1528890994.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:34.838Z,1528890994.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:34.856Z,1528890994.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:37.937Z,1528890997.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:37.956Z,1528890997.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:38.105Z,1528890998.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:38.157Z,1528890998.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:38.494Z,1528890998.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:38.512Z,1528890998.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:38.889Z,1528890998.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:38.907Z,1528890998.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:39.287Z,1528890999.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:39.318Z,1528890999.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:39.690Z,1528890999.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:39.708Z,1528890999.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:40.094Z,1528891000.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:40.116Z,1528891000.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:40.498Z,1528891000.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:40.515Z,1528891000.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:40.898Z,1528891000.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:40.916Z,1528891000.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:41.289Z,1528891001.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:41.307Z,1528891001.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:41.687Z,1528891001.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:41.709Z,1528891001.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:42.091Z,1528891002.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:42.109Z,1528891002.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:42.483Z,1528891002.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:42.512Z,1528891002.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:42.892Z,1528891002.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:42.922Z,1528891002.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:43.299Z,1528891003.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:43.317Z,1528891003.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:43.699Z,1528891003.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:43.716Z,1528891003.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:44.087Z,1528891004.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:44.111Z,1528891004.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:44.490Z,1528891004.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:44.509Z,1528891004.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:44.883Z,1528891004.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:44.912Z,1528891004.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:45.294Z,1528891005.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:45.316Z,1528891005.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:45.683Z,1528891005.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:45.724Z,1528891005.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:46.100Z,1528891006.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:46.118Z,1528891006.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:46.508Z,1528891006.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:46.526Z,1528891006.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:46.905Z,1528891006.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:46.923Z,1528891006.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:47.280Z,1528891007.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:47.316Z,1528891007.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:47.683Z,1528891007.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:47.716Z,1528891007.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:48.080Z,1528891008.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:48.115Z,1528891008.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:48.479Z,1528891008.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:48.520Z,1528891008.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:48.898Z,1528891008.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:48.923Z,1528891008.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:49.298Z,1528891009.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:49.324Z,1528891009.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:49.690Z,1528891009.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:49.724Z,1528891009.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:50.087Z,1528891010.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:50.116Z,1528891010.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:50.483Z,1528891010.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:50.518Z,1528891010.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:50.879Z,1528891010.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:50.912Z,1528891010.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:51.284Z,1528891011.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:51.323Z,1528891011.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:51.683Z,1528891011.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:51.723Z,1528891011.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:51.723Z,1528891011.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 170
2018-06-13T11:56:51.723Z,1528891011.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:56:51.725Z,1528891011.725 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:51.725Z,1528891011.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 170
2018-06-13T11:56:51.725Z,1528891011.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:56:51.727Z,1528891011.727 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:51.727Z,1528891011.727 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 170
2018-06-13T11:56:51.727Z,1528891011.727 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:56:51.805Z,1528891011.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:56:51.805Z,1528891011.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:56:51.806Z,1528891011.806 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:56:52.094Z,1528891012.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:52.202Z,1528891012.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:56:52.202Z,1528891012.202 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 170
2018-06-13T11:56:52.202Z,1528891012.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:56:52.202Z,1528891012.202 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 170
2018-06-13T11:56:52.203Z,1528891012.203 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:56:52.203Z,1528891012.203 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 170
2018-06-13T11:56:52.503Z,1528891012.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:52.520Z,1528891012.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:56:52.522Z,1528891012.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:56:52.522Z,1528891012.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:56:52.522Z,1528891012.522 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:56:52.523Z,1528891012.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:56:52.523Z,1528891012.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:56:52.523Z,1528891012.523 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:56:52.524Z,1528891012.524 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:56:52.524Z,1528891012.524 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:56:52.893Z,1528891012.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:52.933Z,1528891012.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:56:52.934Z,1528891012.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:53.283Z,1528891013.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:53.308Z,1528891013.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:56:53.308Z,1528891013.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:53.686Z,1528891013.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:53.703Z,1528891013.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:56:53.704Z,1528891013.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:54.086Z,1528891014.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:54.103Z,1528891014.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:56:54.104Z,1528891014.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:54.486Z,1528891014.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:54.503Z,1528891014.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:56:54.504Z,1528891014.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:54.898Z,1528891014.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:54.931Z,1528891014.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:56:54.932Z,1528891014.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:55.293Z,1528891015.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:55.310Z,1528891015.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:56:55.311Z,1528891015.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:55.690Z,1528891015.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:55.707Z,1528891015.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:56:55.708Z,1528891015.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:56.086Z,1528891016.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:56.104Z,1528891016.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:56:56.105Z,1528891016.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:56.488Z,1528891016.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:56.505Z,1528891016.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:56:56.506Z,1528891016.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:56.888Z,1528891016.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:56.906Z,1528891016.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:56:56.907Z,1528891016.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:57.290Z,1528891017.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:57.308Z,1528891017.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:56:57.309Z,1528891017.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:57.685Z,1528891017.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:57.702Z,1528891017.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:56:57.703Z,1528891017.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:58.090Z,1528891018.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:58.112Z,1528891018.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:56:58.113Z,1528891018.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:58.498Z,1528891018.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:58.535Z,1528891018.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:56:58.536Z,1528891018.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:58.898Z,1528891018.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:58.915Z,1528891018.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:56:58.916Z,1528891018.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:59.283Z,1528891019.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:59.314Z,1528891019.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T11:56:59.315Z,1528891019.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:56:59.688Z,1528891019.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:56:59.706Z,1528891019.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T11:56:59.707Z,1528891019.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:00.086Z,1528891020.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:00.103Z,1528891020.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T11:57:00.104Z,1528891020.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:00.483Z,1528891020.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:00.526Z,1528891020.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T11:57:00.527Z,1528891020.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:00.894Z,1528891020.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:00.912Z,1528891020.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T11:57:00.913Z,1528891020.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:01.297Z,1528891021.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:01.314Z,1528891021.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T11:57:01.315Z,1528891021.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:01.694Z,1528891021.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:01.711Z,1528891021.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T11:57:01.712Z,1528891021.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:02.088Z,1528891022.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:02.105Z,1528891022.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T11:57:02.106Z,1528891022.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:02.486Z,1528891022.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:02.507Z,1528891022.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T11:57:02.508Z,1528891022.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:02.888Z,1528891022.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:02.912Z,1528891022.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T11:57:02.913Z,1528891022.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:03.288Z,1528891023.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:03.305Z,1528891023.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T11:57:03.306Z,1528891023.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:03.687Z,1528891023.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:03.703Z,1528891023.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T11:57:03.704Z,1528891023.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:04.094Z,1528891024.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:04.111Z,1528891024.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T11:57:04.112Z,1528891024.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:04.498Z,1528891024.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:04.515Z,1528891024.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T11:57:04.516Z,1528891024.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:04.893Z,1528891024.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:04.915Z,1528891024.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T11:57:04.916Z,1528891024.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:05.287Z,1528891025.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:05.312Z,1528891025.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T11:57:05.312Z,1528891025.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:05.688Z,1528891025.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:05.706Z,1528891025.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T11:57:05.707Z,1528891025.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:06.089Z,1528891026.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:06.106Z,1528891026.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T11:57:06.107Z,1528891026.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:06.488Z,1528891026.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:06.506Z,1528891026.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T11:57:06.507Z,1528891026.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:06.894Z,1528891026.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:06.911Z,1528891026.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T11:57:06.912Z,1528891026.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:07.297Z,1528891027.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:07.314Z,1528891027.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T11:57:07.315Z,1528891027.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:07.694Z,1528891027.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:07.712Z,1528891027.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T11:57:07.713Z,1528891027.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:08.088Z,1528891028.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:08.112Z,1528891028.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T11:57:08.113Z,1528891028.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:08.490Z,1528891028.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:08.507Z,1528891028.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T11:57:08.508Z,1528891028.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:08.888Z,1528891028.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:08.906Z,1528891028.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T11:57:08.907Z,1528891028.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:09.282Z,1528891029.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:09.307Z,1528891029.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T11:57:09.308Z,1528891029.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:09.686Z,1528891029.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:09.703Z,1528891029.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T11:57:09.704Z,1528891029.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:10.094Z,1528891030.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:10.112Z,1528891030.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T11:57:10.113Z,1528891030.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:10.498Z,1528891030.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:10.520Z,1528891030.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T11:57:10.521Z,1528891030.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:10.897Z,1528891030.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:10.919Z,1528891030.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T11:57:10.920Z,1528891030.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:11.290Z,1528891031.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:11.312Z,1528891031.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T11:57:11.313Z,1528891031.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:11.687Z,1528891031.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:11.722Z,1528891031.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T11:57:11.723Z,1528891031.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:12.094Z,1528891032.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:12.111Z,1528891032.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:12.490Z,1528891032.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:12.509Z,1528891032.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:12.894Z,1528891032.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:12.916Z,1528891032.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:13.301Z,1528891033.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:13.324Z,1528891033.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:13.698Z,1528891033.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:13.716Z,1528891033.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:14.087Z,1528891034.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:14.123Z,1528891034.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:14.487Z,1528891034.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:14.520Z,1528891034.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:14.889Z,1528891034.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:14.912Z,1528891034.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:15.294Z,1528891035.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:15.313Z,1528891035.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:15.690Z,1528891035.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:15.708Z,1528891035.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:16.093Z,1528891036.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:16.112Z,1528891036.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:16.498Z,1528891036.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:16.515Z,1528891036.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:16.902Z,1528891036.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:16.920Z,1528891036.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:17.289Z,1528891037.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:17.312Z,1528891037.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:17.688Z,1528891037.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:17.706Z,1528891037.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:18.086Z,1528891038.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:18.112Z,1528891038.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:18.492Z,1528891038.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:18.510Z,1528891038.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:18.898Z,1528891038.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:18.916Z,1528891038.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:19.298Z,1528891039.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:19.316Z,1528891039.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:19.698Z,1528891039.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:19.715Z,1528891039.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:20.094Z,1528891040.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:20.112Z,1528891040.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:20.493Z,1528891040.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:20.511Z,1528891040.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:20.889Z,1528891040.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:20.912Z,1528891040.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:21.287Z,1528891041.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:21.317Z,1528891041.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:21.690Z,1528891041.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:21.716Z,1528891041.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:22.099Z,1528891042.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:22.117Z,1528891042.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:22.498Z,1528891042.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:22.520Z,1528891042.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:22.900Z,1528891042.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:22.924Z,1528891042.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:23.293Z,1528891043.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:23.311Z,1528891043.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:23.693Z,1528891043.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:23.711Z,1528891043.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:24.091Z,1528891044.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:24.110Z,1528891044.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:24.489Z,1528891044.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:24.507Z,1528891044.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:24.899Z,1528891044.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:24.917Z,1528891044.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:25.302Z,1528891045.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:25.319Z,1528891045.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:25.699Z,1528891045.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:25.717Z,1528891045.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:26.083Z,1528891046.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:26.107Z,1528891046.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:26.494Z,1528891046.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:26.511Z,1528891046.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:26.895Z,1528891046.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:26.913Z,1528891046.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:27.295Z,1528891047.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:27.316Z,1528891047.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:27.692Z,1528891047.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:27.710Z,1528891047.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:28.102Z,1528891048.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:28.124Z,1528891048.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:28.498Z,1528891048.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:28.520Z,1528891048.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:28.902Z,1528891048.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:28.944Z,1528891048.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:29.289Z,1528891049.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:29.308Z,1528891049.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:29.689Z,1528891049.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:29.715Z,1528891049.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:30.094Z,1528891050.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:30.112Z,1528891050.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:30.489Z,1528891050.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:30.513Z,1528891050.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:30.898Z,1528891050.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:30.917Z,1528891050.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:31.302Z,1528891051.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:31.328Z,1528891051.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:31.696Z,1528891051.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:31.721Z,1528891051.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:32.093Z,1528891052.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:32.116Z,1528891052.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:32.495Z,1528891052.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:32.520Z,1528891052.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:32.880Z,1528891052.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:32.913Z,1528891052.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:33.297Z,1528891053.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:33.315Z,1528891053.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:33.698Z,1528891053.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:33.724Z,1528891053.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:36.813Z,1528891056.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:36.848Z,1528891056.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:36.994Z,1528891056.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:37.017Z,1528891057.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:37.390Z,1528891057.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:37.413Z,1528891057.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:37.763Z,1528891057.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:37.793Z,1528891057.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:38.164Z,1528891058.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:38.181Z,1528891058.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:38.567Z,1528891058.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:38.612Z,1528891058.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:38.973Z,1528891058.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:38.991Z,1528891058.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:39.377Z,1528891059.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:39.395Z,1528891059.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:39.777Z,1528891059.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:39.795Z,1528891059.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:40.168Z,1528891060.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:40.185Z,1528891060.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:40.568Z,1528891060.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:40.586Z,1528891060.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:40.969Z,1528891060.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:40.992Z,1528891060.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:41.366Z,1528891061.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:41.384Z,1528891061.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:41.759Z,1528891061.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:41.789Z,1528891061.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:42.177Z,1528891062.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:42.207Z,1528891062.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:42.577Z,1528891062.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:42.612Z,1528891062.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:42.974Z,1528891062.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:43.001Z,1528891063.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:43.363Z,1528891063.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:43.398Z,1528891063.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:43.763Z,1528891063.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:43.781Z,1528891063.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:44.163Z,1528891064.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:44.181Z,1528891064.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:44.567Z,1528891064.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:44.592Z,1528891064.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:44.977Z,1528891064.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:45.015Z,1528891065.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:45.377Z,1528891065.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:45.395Z,1528891065.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:45.777Z,1528891065.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:45.795Z,1528891065.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:46.163Z,1528891066.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:46.185Z,1528891066.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:46.568Z,1528891066.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:46.586Z,1528891066.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:46.969Z,1528891066.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:46.987Z,1528891066.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:47.366Z,1528891067.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:47.384Z,1528891067.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:47.766Z,1528891067.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:47.784Z,1528891067.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:48.177Z,1528891068.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:48.195Z,1528891068.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:48.577Z,1528891068.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:48.617Z,1528891068.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:48.974Z,1528891068.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:48.996Z,1528891068.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:49.374Z,1528891069.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:49.391Z,1528891069.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:49.763Z,1528891069.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:49.794Z,1528891069.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:50.169Z,1528891070.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:50.187Z,1528891070.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:50.567Z,1528891070.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:50.602Z,1528891070.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:50.979Z,1528891070.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:51.005Z,1528891071.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:51.384Z,1528891071.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:51.407Z,1528891071.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:51.783Z,1528891071.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:51.802Z,1528891071.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:52.169Z,1528891072.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:52.187Z,1528891072.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:52.569Z,1528891072.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:52.587Z,1528891072.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:52.970Z,1528891072.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:52.988Z,1528891072.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:53.370Z,1528891073.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:53.388Z,1528891073.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:53.766Z,1528891073.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:53.790Z,1528891073.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:54.184Z,1528891074.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:54.203Z,1528891074.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:54.579Z,1528891074.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:54.598Z,1528891074.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:54.979Z,1528891074.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:54.997Z,1528891074.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:55.370Z,1528891075.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:55.392Z,1528891075.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:55.759Z,1528891075.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:55.795Z,1528891075.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:56.168Z,1528891076.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:56.194Z,1528891076.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:56.567Z,1528891076.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:56.592Z,1528891076.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:56.979Z,1528891076.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:56.998Z,1528891076.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:57.382Z,1528891077.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:57.405Z,1528891077.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:57.783Z,1528891077.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:57.805Z,1528891077.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:58.159Z,1528891078.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:58.195Z,1528891078.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:58.563Z,1528891078.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:58.600Z,1528891078.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:58.964Z,1528891078.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:58.998Z,1528891078.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:59.359Z,1528891079.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:59.387Z,1528891079.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:57:59.763Z,1528891079.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:57:59.790Z,1528891079.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:00.183Z,1528891080.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:00.205Z,1528891080.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:00.580Z,1528891080.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:00.598Z,1528891080.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:00.984Z,1528891080.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:01.005Z,1528891081.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:01.363Z,1528891081.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:01.402Z,1528891081.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:01.763Z,1528891081.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:01.790Z,1528891081.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:02.164Z,1528891082.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:02.191Z,1528891082.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:02.563Z,1528891082.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:02.592Z,1528891082.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:02.981Z,1528891082.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:02.999Z,1528891082.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:03.383Z,1528891083.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:03.402Z,1528891083.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:03.784Z,1528891083.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:03.803Z,1528891083.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:04.159Z,1528891084.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:04.196Z,1528891084.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:04.563Z,1528891084.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:04.589Z,1528891084.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:04.967Z,1528891084.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:04.998Z,1528891084.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:05.364Z,1528891085.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:05.391Z,1528891085.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:05.763Z,1528891085.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:05.790Z,1528891085.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:06.184Z,1528891086.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:06.203Z,1528891086.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:06.583Z,1528891086.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:06.602Z,1528891086.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:06.979Z,1528891086.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:06.998Z,1528891086.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:07.363Z,1528891087.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:07.398Z,1528891087.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:07.763Z,1528891087.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:07.802Z,1528891087.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:08.167Z,1528891088.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:08.200Z,1528891088.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:08.563Z,1528891088.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:08.601Z,1528891088.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:08.973Z,1528891088.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:09.001Z,1528891089.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:09.377Z,1528891089.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:09.412Z,1528891089.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:09.790Z,1528891089.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:09.814Z,1528891089.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:10.163Z,1528891090.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:10.180Z,1528891090.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:10.563Z,1528891090.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:10.580Z,1528891090.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:10.963Z,1528891090.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:10.981Z,1528891090.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:11.368Z,1528891091.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:11.388Z,1528891091.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:11.767Z,1528891091.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:11.813Z,1528891091.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:12.178Z,1528891092.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:12.196Z,1528891092.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:12.574Z,1528891092.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:12.591Z,1528891092.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:12.986Z,1528891092.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:13.020Z,1528891093.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:13.374Z,1528891093.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:13.392Z,1528891093.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:13.771Z,1528891093.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:13.788Z,1528891093.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:14.168Z,1528891094.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:14.200Z,1528891094.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:14.574Z,1528891094.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:14.592Z,1528891094.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:14.975Z,1528891094.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:14.993Z,1528891094.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:15.378Z,1528891095.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:15.396Z,1528891095.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:15.778Z,1528891095.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:15.796Z,1528891095.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:16.166Z,1528891096.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:16.184Z,1528891096.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:16.572Z,1528891096.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:16.591Z,1528891096.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:16.967Z,1528891096.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:17.002Z,1528891097.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:17.370Z,1528891097.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:17.387Z,1528891097.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:17.770Z,1528891097.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:17.792Z,1528891097.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:18.181Z,1528891098.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:18.201Z,1528891098.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:18.578Z,1528891098.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:18.602Z,1528891098.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:18.978Z,1528891098.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:18.995Z,1528891098.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:19.372Z,1528891099.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:19.403Z,1528891099.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:19.772Z,1528891099.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:19.790Z,1528891099.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:20.174Z,1528891100.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:20.191Z,1528891100.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:20.570Z,1528891100.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:20.588Z,1528891100.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:20.978Z,1528891100.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:21.013Z,1528891101.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:21.384Z,1528891101.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:21.402Z,1528891101.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:21.787Z,1528891101.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:21.806Z,1528891101.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:22.163Z,1528891102.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:22.196Z,1528891102.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:22.572Z,1528891102.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:22.590Z,1528891102.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:22.974Z,1528891102.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:22.992Z,1528891102.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:23.364Z,1528891103.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:23.395Z,1528891103.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:23.772Z,1528891103.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:23.790Z,1528891103.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:24.186Z,1528891104.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:24.205Z,1528891104.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:24.576Z,1528891104.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:24.603Z,1528891104.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:24.986Z,1528891104.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:25.005Z,1528891105.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:25.374Z,1528891105.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:25.392Z,1528891105.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:25.759Z,1528891105.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:25.791Z,1528891105.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:26.171Z,1528891106.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:26.194Z,1528891106.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:26.570Z,1528891106.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:26.600Z,1528891106.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:26.984Z,1528891106.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:27.002Z,1528891107.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:27.386Z,1528891107.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:27.405Z,1528891107.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:27.782Z,1528891107.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:27.816Z,1528891107.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:28.162Z,1528891108.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:28.196Z,1528891108.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:28.567Z,1528891108.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:28.600Z,1528891108.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:28.964Z,1528891108.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:29.000Z,1528891109.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:29.366Z,1528891109.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:29.400Z,1528891109.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:29.766Z,1528891109.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:29.800Z,1528891109.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:30.188Z,1528891110.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:30.207Z,1528891110.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:30.576Z,1528891110.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:30.606Z,1528891110.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:30.976Z,1528891110.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:31.006Z,1528891111.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:31.366Z,1528891111.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:31.407Z,1528891111.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:31.767Z,1528891111.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:31.800Z,1528891111.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:32.164Z,1528891112.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:32.204Z,1528891112.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:32.564Z,1528891112.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:32.598Z,1528891112.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:32.974Z,1528891112.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:33.005Z,1528891113.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:33.384Z,1528891113.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:33.405Z,1528891113.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:33.408Z,1528891113.408 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T11:58:33.408Z,1528891113.408 [Default:CheckIn:C.Wait] Stopped
2018-06-13T11:58:33.408Z,1528891113.408 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T11:58:33.409Z,1528891113.409 [Default:CheckIn:D] Running Loop=1
2018-06-13T11:58:33.792Z,1528891113.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:33.812Z,1528891113.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:33.815Z,1528891113.815 [Default:CheckIn:D] Stopped
2018-06-13T11:58:33.815Z,1528891113.815 [Default:CheckIn:E] Running Loop=1
2018-06-13T11:58:36.876Z,1528891116.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:36.902Z,1528891116.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:36.906Z,1528891116.906 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 511.339486 min 
2018-06-13T11:58:36.906Z,1528891116.906 [Default:CheckIn:E] Stopped
2018-06-13T11:58:36.906Z,1528891116.906 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T11:58:36.906Z,1528891116.906 [Default:CheckIn] Stopped
2018-06-13T11:58:36.906Z,1528891116.906 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T11:58:36.906Z,1528891116.906 [Default:CheckIn](INFO): Running loop #50
2018-06-13T11:58:36.906Z,1528891116.906 [Default:CheckIn] Running Loop=50
2018-06-13T11:58:36.906Z,1528891116.906 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T11:58:36.907Z,1528891116.907 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T11:58:37.020Z,1528891117.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:37.051Z,1528891117.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:37.429Z,1528891117.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:37.447Z,1528891117.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:37.829Z,1528891117.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:37.847Z,1528891117.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:38.230Z,1528891118.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:38.247Z,1528891118.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:38.620Z,1528891118.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:38.646Z,1528891118.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:39.022Z,1528891119.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:39.039Z,1528891119.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:39.420Z,1528891119.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:39.446Z,1528891119.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:39.820Z,1528891119.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:39.855Z,1528891119.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:40.231Z,1528891120.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:40.256Z,1528891120.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:40.630Z,1528891120.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:40.648Z,1528891120.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:41.031Z,1528891121.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:41.049Z,1528891121.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:41.423Z,1528891121.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:41.441Z,1528891121.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:41.824Z,1528891121.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:41.842Z,1528891121.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:42.222Z,1528891122.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:42.254Z,1528891122.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:42.619Z,1528891122.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:42.637Z,1528891122.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:43.031Z,1528891123.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:43.056Z,1528891123.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:43.432Z,1528891123.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:43.450Z,1528891123.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:43.831Z,1528891123.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:43.850Z,1528891123.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:44.220Z,1528891124.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:44.243Z,1528891124.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:44.623Z,1528891124.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:44.642Z,1528891124.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:45.024Z,1528891125.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:45.042Z,1528891125.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:45.422Z,1528891125.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:45.441Z,1528891125.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:45.823Z,1528891125.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:45.841Z,1528891125.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:46.235Z,1528891126.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:46.260Z,1528891126.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:46.635Z,1528891126.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:46.653Z,1528891126.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:47.035Z,1528891127.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:47.054Z,1528891127.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:47.417Z,1528891127.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:47.442Z,1528891127.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:47.819Z,1528891127.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:47.843Z,1528891127.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:48.227Z,1528891128.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:48.258Z,1528891128.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:48.622Z,1528891128.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:48.645Z,1528891128.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:49.034Z,1528891129.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:49.052Z,1528891129.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:49.436Z,1528891129.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:49.454Z,1528891129.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:49.831Z,1528891129.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:49.849Z,1528891129.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:50.223Z,1528891130.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:50.240Z,1528891130.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:50.623Z,1528891130.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:50.649Z,1528891130.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:51.011Z,1528891131.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:51.047Z,1528891131.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:51.424Z,1528891131.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:51.450Z,1528891131.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:51.822Z,1528891131.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:51.847Z,1528891131.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:52.236Z,1528891132.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:52.253Z,1528891132.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:52.635Z,1528891132.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:52.653Z,1528891132.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:53.036Z,1528891133.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:53.060Z,1528891133.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:53.422Z,1528891133.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:53.447Z,1528891133.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:53.816Z,1528891133.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:53.843Z,1528891133.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:54.225Z,1528891134.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:54.244Z,1528891134.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:54.624Z,1528891134.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:54.642Z,1528891134.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:55.035Z,1528891135.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:55.052Z,1528891135.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:55.436Z,1528891135.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:55.455Z,1528891135.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:55.828Z,1528891135.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:55.846Z,1528891135.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:56.223Z,1528891136.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:56.262Z,1528891136.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:56.627Z,1528891136.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:56.645Z,1528891136.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:57.025Z,1528891137.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:57.042Z,1528891137.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:57.425Z,1528891137.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:57.443Z,1528891137.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:57.827Z,1528891137.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:57.844Z,1528891137.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:58.236Z,1528891138.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:58.254Z,1528891138.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:58.638Z,1528891138.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:58.663Z,1528891138.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:59.038Z,1528891139.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:59.055Z,1528891139.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:59.411Z,1528891139.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:59.448Z,1528891139.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:58:59.817Z,1528891139.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:58:59.848Z,1528891139.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:00.217Z,1528891140.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:00.247Z,1528891140.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:00.616Z,1528891140.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:00.654Z,1528891140.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:01.034Z,1528891141.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:01.073Z,1528891141.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:01.427Z,1528891141.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:01.456Z,1528891141.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:01.822Z,1528891141.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:01.859Z,1528891141.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:02.216Z,1528891142.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:02.246Z,1528891142.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:02.615Z,1528891142.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:02.659Z,1528891142.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:03.014Z,1528891143.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:03.047Z,1528891143.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:03.420Z,1528891143.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:03.459Z,1528891143.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:03.817Z,1528891143.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:03.834Z,1528891143.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:04.232Z,1528891144.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:04.262Z,1528891144.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:04.631Z,1528891144.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:04.664Z,1528891144.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:05.029Z,1528891145.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:05.065Z,1528891145.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:05.418Z,1528891145.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:05.436Z,1528891145.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:05.820Z,1528891145.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:05.868Z,1528891145.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:06.223Z,1528891146.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:06.263Z,1528891146.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:06.618Z,1528891146.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:06.635Z,1528891146.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:07.033Z,1528891147.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:07.067Z,1528891147.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:07.426Z,1528891147.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:07.447Z,1528891147.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:07.826Z,1528891147.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:07.848Z,1528891147.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:08.223Z,1528891148.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:08.263Z,1528891148.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:08.626Z,1528891148.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:08.643Z,1528891148.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:09.015Z,1528891149.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:09.066Z,1528891149.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:09.421Z,1528891149.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:09.446Z,1528891149.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.380847 seconds old.
2018-06-13T11:59:09.447Z,1528891149.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:09.448Z,1528891149.448 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.381265 seconds old.
2018-06-13T11:59:09.449Z,1528891149.449 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.381810 seconds old.
2018-06-13T11:59:09.824Z,1528891149.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:09.841Z,1528891149.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.776216 seconds old.
2018-06-13T11:59:09.842Z,1528891149.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:09.843Z,1528891149.843 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.776519 seconds old.
2018-06-13T11:59:09.844Z,1528891149.844 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.776881 seconds old.
2018-06-13T11:59:10.226Z,1528891150.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:10.243Z,1528891150.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.178001 seconds old.
2018-06-13T11:59:10.244Z,1528891150.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:10.245Z,1528891150.245 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.178501 seconds old.
2018-06-13T11:59:10.246Z,1528891150.246 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.178898 seconds old.
2018-06-13T11:59:10.630Z,1528891150.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:10.650Z,1528891150.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.585144 seconds old.
2018-06-13T11:59:10.651Z,1528891150.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:10.652Z,1528891150.652 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.585451 seconds old.
2018-06-13T11:59:10.669Z,1528891150.669 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.601987 seconds old.
2018-06-13T11:59:11.030Z,1528891151.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:11.046Z,1528891151.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.980982 seconds old.
2018-06-13T11:59:11.047Z,1528891151.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:11.048Z,1528891151.048 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.981284 seconds old.
2018-06-13T11:59:11.049Z,1528891151.049 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.981717 seconds old.
2018-06-13T11:59:11.425Z,1528891151.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:11.442Z,1528891151.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.376624 seconds old.
2018-06-13T11:59:11.443Z,1528891151.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:11.444Z,1528891151.444 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.376937 seconds old.
2018-06-13T11:59:11.445Z,1528891151.445 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.377282 seconds old.
2018-06-13T11:59:11.823Z,1528891151.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:11.850Z,1528891151.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.784700 seconds old.
2018-06-13T11:59:11.851Z,1528891151.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:11.852Z,1528891151.852 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.785022 seconds old.
2018-06-13T11:59:11.853Z,1528891151.853 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.785379 seconds old.
2018-06-13T11:59:12.220Z,1528891152.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:12.272Z,1528891152.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.206825 seconds old.
2018-06-13T11:59:12.287Z,1528891152.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:12.290Z,1528891152.290 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.223021 seconds old.
2018-06-13T11:59:12.291Z,1528891152.291 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.223470 seconds old.
2018-06-13T11:59:12.616Z,1528891152.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:12.651Z,1528891152.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.585733 seconds old.
2018-06-13T11:59:12.652Z,1528891152.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:12.653Z,1528891152.653 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.586035 seconds old.
2018-06-13T11:59:12.654Z,1528891152.654 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.586635 seconds old.
2018-06-13T11:59:13.034Z,1528891153.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:13.062Z,1528891153.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.997414 seconds old.
2018-06-13T11:59:13.063Z,1528891153.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:13.064Z,1528891153.064 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.997724 seconds old.
2018-06-13T11:59:13.070Z,1528891153.070 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.002315 seconds old.
2018-06-13T11:59:13.436Z,1528891153.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:13.453Z,1528891153.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.387546 seconds old.
2018-06-13T11:59:13.454Z,1528891153.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:13.455Z,1528891153.455 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.387944 seconds old.
2018-06-13T11:59:13.456Z,1528891153.456 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.388297 seconds old.
2018-06-13T11:59:13.837Z,1528891153.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:13.857Z,1528891153.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.792002 seconds old.
2018-06-13T11:59:13.858Z,1528891153.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:13.859Z,1528891153.859 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.792333 seconds old.
2018-06-13T11:59:13.860Z,1528891153.860 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.792682 seconds old.
2018-06-13T11:59:14.217Z,1528891154.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:14.254Z,1528891154.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.189140 seconds old.
2018-06-13T11:59:14.255Z,1528891154.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:14.256Z,1528891154.256 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.189458 seconds old.
2018-06-13T11:59:14.257Z,1528891154.257 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.190011 seconds old.
2018-06-13T11:59:14.611Z,1528891154.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:14.659Z,1528891154.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:15.037Z,1528891155.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:15.055Z,1528891155.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:15.435Z,1528891155.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:15.461Z,1528891155.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:15.841Z,1528891155.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:15.858Z,1528891155.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:16.217Z,1528891156.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:16.249Z,1528891156.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:16.619Z,1528891156.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:16.646Z,1528891156.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:17.036Z,1528891157.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:17.069Z,1528891157.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:17.440Z,1528891157.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:17.476Z,1528891157.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:17.839Z,1528891157.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:17.857Z,1528891157.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:18.220Z,1528891158.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:18.270Z,1528891158.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:18.616Z,1528891158.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:18.656Z,1528891158.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:19.038Z,1528891159.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:19.058Z,1528891159.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:19.435Z,1528891159.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:19.468Z,1528891159.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:19.838Z,1528891159.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:19.860Z,1528891159.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:20.216Z,1528891160.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:20.257Z,1528891160.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:20.616Z,1528891160.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:20.652Z,1528891160.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:21.041Z,1528891161.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:21.059Z,1528891161.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:21.438Z,1528891161.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:21.460Z,1528891161.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:21.833Z,1528891161.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:21.864Z,1528891161.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:22.218Z,1528891162.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:22.260Z,1528891162.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:22.616Z,1528891162.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:22.647Z,1528891162.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:23.042Z,1528891163.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:23.064Z,1528891163.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:23.430Z,1528891163.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:23.473Z,1528891163.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:23.829Z,1528891163.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:23.864Z,1528891163.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:24.217Z,1528891164.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:24.253Z,1528891164.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:24.618Z,1528891164.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:24.657Z,1528891164.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:25.029Z,1528891165.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:25.072Z,1528891165.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:25.433Z,1528891165.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:25.472Z,1528891165.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:25.829Z,1528891165.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:25.866Z,1528891165.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:26.220Z,1528891166.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:26.243Z,1528891166.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:26.619Z,1528891166.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:26.637Z,1528891166.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:27.033Z,1528891167.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:27.068Z,1528891167.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:27.433Z,1528891167.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:27.470Z,1528891167.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:27.836Z,1528891167.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:27.870Z,1528891167.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:28.220Z,1528891168.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:28.271Z,1528891168.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:28.619Z,1528891168.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:28.636Z,1528891168.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:29.030Z,1528891169.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:29.075Z,1528891169.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:29.431Z,1528891169.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:29.452Z,1528891169.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:29.830Z,1528891169.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:29.877Z,1528891169.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:30.224Z,1528891170.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:30.241Z,1528891170.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:30.622Z,1528891170.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:30.639Z,1528891170.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:31.029Z,1528891171.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:31.053Z,1528891171.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:31.430Z,1528891171.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:31.470Z,1528891171.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:31.831Z,1528891171.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:31.875Z,1528891171.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:32.223Z,1528891172.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:32.241Z,1528891172.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:32.623Z,1528891172.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:32.651Z,1528891172.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:33.031Z,1528891173.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:33.056Z,1528891173.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:33.435Z,1528891173.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:33.453Z,1528891173.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:33.835Z,1528891173.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:33.864Z,1528891173.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:36.939Z,1528891176.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:36.964Z,1528891176.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:37.104Z,1528891177.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:37.141Z,1528891177.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:37.514Z,1528891177.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:37.542Z,1528891177.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:37.914Z,1528891177.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:37.940Z,1528891177.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:38.310Z,1528891178.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:38.347Z,1528891178.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:38.699Z,1528891178.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:38.717Z,1528891178.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:39.099Z,1528891179.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:39.145Z,1528891179.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:39.502Z,1528891179.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:39.520Z,1528891179.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:39.900Z,1528891179.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:39.939Z,1528891179.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:40.310Z,1528891180.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:40.327Z,1528891180.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:40.709Z,1528891180.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:40.727Z,1528891180.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:41.110Z,1528891181.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:41.127Z,1528891181.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:41.501Z,1528891181.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:41.519Z,1528891181.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:41.901Z,1528891181.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:41.923Z,1528891181.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:42.304Z,1528891182.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:42.321Z,1528891182.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:42.697Z,1528891182.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:42.731Z,1528891182.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:43.110Z,1528891183.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:43.127Z,1528891183.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:43.514Z,1528891183.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:43.531Z,1528891183.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:43.911Z,1528891183.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:43.929Z,1528891183.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:44.302Z,1528891184.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:44.347Z,1528891184.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:44.707Z,1528891184.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:44.725Z,1528891184.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:45.101Z,1528891185.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:45.124Z,1528891185.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:45.499Z,1528891185.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:45.531Z,1528891185.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:45.900Z,1528891185.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:45.944Z,1528891185.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:46.310Z,1528891186.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:46.328Z,1528891186.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:46.714Z,1528891186.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:46.732Z,1528891186.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:47.111Z,1528891187.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:47.128Z,1528891187.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:47.496Z,1528891187.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:47.526Z,1528891187.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:47.905Z,1528891187.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:47.923Z,1528891187.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:48.306Z,1528891188.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:48.323Z,1528891188.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:48.701Z,1528891188.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:48.724Z,1528891188.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:49.111Z,1528891189.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:49.141Z,1528891189.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:49.516Z,1528891189.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:49.534Z,1528891189.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:49.915Z,1528891189.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:49.933Z,1528891189.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:50.305Z,1528891190.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:50.323Z,1528891190.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:50.705Z,1528891190.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:50.729Z,1528891190.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:51.104Z,1528891191.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:51.128Z,1528891191.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:51.508Z,1528891191.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:51.526Z,1528891191.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:51.906Z,1528891191.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:51.928Z,1528891191.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:52.313Z,1528891192.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:52.336Z,1528891192.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:52.714Z,1528891192.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:52.736Z,1528891192.736 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:52.736Z,1528891192.736 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 171
2018-06-13T11:59:52.736Z,1528891192.736 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T11:59:52.738Z,1528891192.738 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:52.738Z,1528891192.738 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 171
2018-06-13T11:59:52.738Z,1528891192.738 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T11:59:52.740Z,1528891192.740 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:52.740Z,1528891192.740 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 171
2018-06-13T11:59:52.740Z,1528891192.740 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T11:59:52.825Z,1528891192.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T11:59:52.825Z,1528891192.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T11:59:52.826Z,1528891192.826 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T11:59:53.114Z,1528891193.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:53.229Z,1528891193.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T11:59:53.229Z,1528891193.229 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 171
2018-06-13T11:59:53.229Z,1528891193.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T11:59:53.230Z,1528891193.230 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 171
2018-06-13T11:59:53.230Z,1528891193.230 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T11:59:53.230Z,1528891193.230 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 171
2018-06-13T11:59:53.495Z,1528891193.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:53.530Z,1528891193.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T11:59:53.531Z,1528891193.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:59:53.531Z,1528891193.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:59:53.531Z,1528891193.531 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T11:59:53.532Z,1528891193.532 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:59:53.532Z,1528891193.532 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:59:53.532Z,1528891193.532 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T11:59:53.533Z,1528891193.533 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T11:59:53.533Z,1528891193.533 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T11:59:53.900Z,1528891193.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:53.930Z,1528891193.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T11:59:53.931Z,1528891193.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:54.294Z,1528891194.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:54.337Z,1528891194.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T11:59:54.338Z,1528891194.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:54.693Z,1528891194.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:54.732Z,1528891194.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T11:59:54.734Z,1528891194.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:55.115Z,1528891195.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:55.133Z,1528891195.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T11:59:55.134Z,1528891195.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:55.520Z,1528891195.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:55.538Z,1528891195.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T11:59:55.539Z,1528891195.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:55.914Z,1528891195.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:55.932Z,1528891195.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T11:59:55.933Z,1528891195.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:56.301Z,1528891196.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:56.329Z,1528891196.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T11:59:56.330Z,1528891196.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:56.699Z,1528891196.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:56.729Z,1528891196.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T11:59:56.730Z,1528891196.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:57.091Z,1528891197.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:57.135Z,1528891197.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T11:59:57.136Z,1528891197.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:57.497Z,1528891197.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:57.534Z,1528891197.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T11:59:57.535Z,1528891197.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:57.897Z,1528891197.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:57.937Z,1528891197.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T11:59:57.938Z,1528891197.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:58.316Z,1528891198.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:58.334Z,1528891198.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T11:59:58.334Z,1528891198.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:58.714Z,1528891198.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:58.740Z,1528891198.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T11:59:58.740Z,1528891198.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:59.118Z,1528891199.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:59.136Z,1528891199.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T11:59:59.137Z,1528891199.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:59.493Z,1528891199.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:59.527Z,1528891199.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T11:59:59.528Z,1528891199.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T11:59:59.898Z,1528891199.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T11:59:59.928Z,1528891199.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T11:59:59.933Z,1528891199.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:00.298Z,1528891200.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:00.347Z,1528891200.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:00:00.348Z,1528891200.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:00.700Z,1528891200.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:00.740Z,1528891200.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:00:00.741Z,1528891200.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:01.107Z,1528891201.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:01.135Z,1528891201.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T12:00:01.136Z,1528891201.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:01.513Z,1528891201.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:01.548Z,1528891201.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:00:01.549Z,1528891201.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:01.905Z,1528891201.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:01.937Z,1528891201.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:00:01.938Z,1528891201.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:02.294Z,1528891202.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:02.340Z,1528891202.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:00:02.340Z,1528891202.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:02.698Z,1528891202.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:02.733Z,1528891202.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:00:02.734Z,1528891202.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:03.103Z,1528891203.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:03.138Z,1528891203.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:00:03.139Z,1528891203.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:03.495Z,1528891203.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:03.543Z,1528891203.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:00:03.544Z,1528891203.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:03.898Z,1528891203.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:03.940Z,1528891203.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:00:03.941Z,1528891203.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:04.312Z,1528891204.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:04.346Z,1528891204.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:00:04.347Z,1528891204.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:04.710Z,1528891204.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:04.748Z,1528891204.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:00:04.749Z,1528891204.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:05.110Z,1528891205.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:05.143Z,1528891205.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:00:05.144Z,1528891205.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:05.494Z,1528891205.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:05.546Z,1528891205.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:00:05.547Z,1528891205.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:05.903Z,1528891205.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:05.947Z,1528891205.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:00:05.948Z,1528891205.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:06.306Z,1528891206.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:06.328Z,1528891206.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:00:06.329Z,1528891206.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:06.698Z,1528891206.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:06.749Z,1528891206.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:00:06.750Z,1528891206.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:07.107Z,1528891207.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:07.130Z,1528891207.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:00:07.131Z,1528891207.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:07.512Z,1528891207.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:07.530Z,1528891207.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T12:00:07.531Z,1528891207.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:07.912Z,1528891207.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:07.929Z,1528891207.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:00:07.930Z,1528891207.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:08.299Z,1528891208.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:08.343Z,1528891208.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:00:08.343Z,1528891208.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:08.699Z,1528891208.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:08.732Z,1528891208.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:00:08.737Z,1528891208.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:09.108Z,1528891209.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:09.127Z,1528891209.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:00:09.128Z,1528891209.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:09.515Z,1528891209.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:09.558Z,1528891209.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:00:09.559Z,1528891209.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:09.911Z,1528891209.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:09.959Z,1528891209.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:00:09.960Z,1528891209.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:10.302Z,1528891210.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:10.325Z,1528891210.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:00:10.326Z,1528891210.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:10.699Z,1528891210.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:10.729Z,1528891210.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:00:10.730Z,1528891210.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:11.114Z,1528891211.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:11.159Z,1528891211.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:00:11.160Z,1528891211.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:11.510Z,1528891211.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:11.555Z,1528891211.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:00:11.556Z,1528891211.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:11.910Z,1528891211.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:11.933Z,1528891211.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:00:11.934Z,1528891211.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:12.299Z,1528891212.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:12.340Z,1528891212.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:00:12.345Z,1528891212.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:12.705Z,1528891212.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:12.723Z,1528891212.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T12:00:12.724Z,1528891212.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:13.110Z,1528891213.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:13.144Z,1528891213.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:13.515Z,1528891213.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:13.538Z,1528891213.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:13.908Z,1528891213.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:13.931Z,1528891213.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:14.300Z,1528891214.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:14.328Z,1528891214.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:14.702Z,1528891214.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:14.743Z,1528891214.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:15.111Z,1528891215.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:15.134Z,1528891215.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:15.516Z,1528891215.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:15.536Z,1528891215.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:15.917Z,1528891215.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:15.935Z,1528891215.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:16.292Z,1528891216.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:16.342Z,1528891216.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:16.698Z,1528891216.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:16.726Z,1528891216.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:17.117Z,1528891217.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:17.138Z,1528891217.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:17.517Z,1528891217.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:17.540Z,1528891217.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:17.911Z,1528891217.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:17.963Z,1528891217.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:18.302Z,1528891218.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:18.327Z,1528891218.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:18.691Z,1528891218.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:18.732Z,1528891218.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:19.115Z,1528891219.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:19.133Z,1528891219.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:19.515Z,1528891219.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:19.561Z,1528891219.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:19.916Z,1528891219.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:19.939Z,1528891219.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:20.300Z,1528891220.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:20.331Z,1528891220.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:20.702Z,1528891220.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:20.742Z,1528891220.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:21.106Z,1528891221.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:21.161Z,1528891221.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:21.516Z,1528891221.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:21.543Z,1528891221.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:21.914Z,1528891221.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:21.960Z,1528891221.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:22.292Z,1528891222.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:22.327Z,1528891222.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:22.695Z,1528891222.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:22.723Z,1528891222.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:23.117Z,1528891223.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:23.144Z,1528891223.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:23.510Z,1528891223.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:23.541Z,1528891223.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:23.911Z,1528891223.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:23.935Z,1528891223.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:24.292Z,1528891224.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:24.323Z,1528891224.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:24.695Z,1528891224.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:24.723Z,1528891224.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:25.111Z,1528891225.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:25.135Z,1528891225.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:25.517Z,1528891225.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:25.548Z,1528891225.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:25.907Z,1528891225.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:25.965Z,1528891225.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:26.296Z,1528891226.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:26.331Z,1528891226.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:26.695Z,1528891226.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:26.739Z,1528891226.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:27.105Z,1528891227.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:27.137Z,1528891227.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:27.509Z,1528891227.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:27.542Z,1528891227.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:27.909Z,1528891227.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:27.952Z,1528891227.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:28.292Z,1528891228.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:28.310Z,1528891228.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:28.695Z,1528891228.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:28.712Z,1528891228.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:29.109Z,1528891229.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:29.149Z,1528891229.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:29.513Z,1528891229.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:29.552Z,1528891229.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:29.909Z,1528891229.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:29.953Z,1528891229.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:30.297Z,1528891230.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:30.317Z,1528891230.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:30.696Z,1528891230.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:30.714Z,1528891230.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:31.105Z,1528891231.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:31.123Z,1528891231.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:31.505Z,1528891231.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:31.523Z,1528891231.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:31.906Z,1528891231.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:31.923Z,1528891231.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:32.300Z,1528891232.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:32.320Z,1528891232.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:32.701Z,1528891232.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:32.719Z,1528891232.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:33.106Z,1528891233.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:33.123Z,1528891233.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:33.513Z,1528891233.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:33.559Z,1528891233.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:33.913Z,1528891233.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:33.931Z,1528891233.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:37.015Z,1528891237.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:37.034Z,1528891237.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:37.167Z,1528891237.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:37.187Z,1528891237.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:37.578Z,1528891237.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:37.612Z,1528891237.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:37.986Z,1528891237.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:38.018Z,1528891238.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:38.378Z,1528891238.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:38.419Z,1528891238.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:38.766Z,1528891238.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:38.788Z,1528891238.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:39.167Z,1528891239.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:39.184Z,1528891239.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:39.566Z,1528891239.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:39.595Z,1528891239.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:39.968Z,1528891239.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:39.992Z,1528891239.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:40.366Z,1528891240.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:40.412Z,1528891240.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:40.775Z,1528891240.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:40.815Z,1528891240.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:41.174Z,1528891241.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:41.192Z,1528891241.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:41.568Z,1528891241.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:41.586Z,1528891241.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:41.964Z,1528891241.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:42.014Z,1528891242.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:42.364Z,1528891242.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:42.412Z,1528891242.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:42.766Z,1528891242.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:42.783Z,1528891242.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:43.174Z,1528891243.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:43.192Z,1528891243.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:43.574Z,1528891243.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:43.596Z,1528891243.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:43.972Z,1528891243.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:43.990Z,1528891243.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:44.368Z,1528891244.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:44.386Z,1528891244.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:44.765Z,1528891244.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:44.799Z,1528891244.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:45.165Z,1528891245.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:45.200Z,1528891245.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:45.563Z,1528891245.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:45.590Z,1528891245.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:45.967Z,1528891245.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:46.001Z,1528891246.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:46.376Z,1528891246.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:46.400Z,1528891246.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:46.774Z,1528891246.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:46.819Z,1528891246.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:47.177Z,1528891247.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:47.223Z,1528891247.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:47.568Z,1528891247.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:47.592Z,1528891247.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:47.970Z,1528891247.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:47.988Z,1528891247.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:48.363Z,1528891248.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:48.414Z,1528891248.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:48.766Z,1528891248.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:48.788Z,1528891248.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:49.175Z,1528891249.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:49.193Z,1528891249.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:49.578Z,1528891249.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:49.596Z,1528891249.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:49.976Z,1528891249.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:50.019Z,1528891250.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:50.370Z,1528891250.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:50.414Z,1528891250.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:50.763Z,1528891250.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:50.815Z,1528891250.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:51.175Z,1528891251.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:51.192Z,1528891251.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:51.574Z,1528891251.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:51.615Z,1528891251.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:51.974Z,1528891251.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:52.012Z,1528891252.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:52.359Z,1528891252.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:52.390Z,1528891252.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:52.766Z,1528891252.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:52.811Z,1528891252.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:53.175Z,1528891253.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:53.219Z,1528891253.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:53.575Z,1528891253.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:53.598Z,1528891253.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:53.976Z,1528891253.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:53.996Z,1528891253.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:54.366Z,1528891254.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:54.399Z,1528891254.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:54.764Z,1528891254.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:54.804Z,1528891254.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:55.175Z,1528891255.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:55.198Z,1528891255.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:55.582Z,1528891255.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:55.601Z,1528891255.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:55.977Z,1528891255.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:55.995Z,1528891255.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:56.366Z,1528891256.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:56.406Z,1528891256.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:56.763Z,1528891256.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:56.799Z,1528891256.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:57.176Z,1528891257.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:57.198Z,1528891257.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:57.582Z,1528891257.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:57.604Z,1528891257.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:57.980Z,1528891257.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:58.031Z,1528891258.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:58.360Z,1528891258.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:58.388Z,1528891258.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:58.759Z,1528891258.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:58.803Z,1528891258.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:59.183Z,1528891259.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:59.201Z,1528891259.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:59.580Z,1528891259.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:59.629Z,1528891259.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:00:59.975Z,1528891259.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:00:59.998Z,1528891259.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:00.360Z,1528891260.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:00.404Z,1528891260.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:00.759Z,1528891260.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:00.790Z,1528891260.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:01.175Z,1528891261.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:01.193Z,1528891261.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:01.581Z,1528891261.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:01.604Z,1528891261.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:01.971Z,1528891261.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:01.994Z,1528891261.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:02.363Z,1528891262.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:02.396Z,1528891262.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:02.759Z,1528891262.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:02.806Z,1528891262.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:03.175Z,1528891263.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:03.193Z,1528891263.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:03.582Z,1528891263.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:03.628Z,1528891263.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:03.983Z,1528891263.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:04.002Z,1528891264.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:04.356Z,1528891264.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:04.392Z,1528891264.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:04.763Z,1528891264.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:04.791Z,1528891264.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:05.180Z,1528891265.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:05.203Z,1528891265.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:05.581Z,1528891265.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:05.602Z,1528891265.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:05.976Z,1528891265.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:06.034Z,1528891266.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:06.360Z,1528891266.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:06.391Z,1528891266.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:06.759Z,1528891266.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:06.787Z,1528891266.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:07.178Z,1528891267.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:07.200Z,1528891267.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:07.576Z,1528891267.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:07.595Z,1528891267.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:07.976Z,1528891267.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:07.994Z,1528891267.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:08.359Z,1528891268.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:08.389Z,1528891268.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:08.759Z,1528891268.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:08.793Z,1528891268.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:09.172Z,1528891269.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:09.190Z,1528891269.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:09.579Z,1528891269.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:09.598Z,1528891269.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:09.979Z,1528891269.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:10.002Z,1528891270.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:10.356Z,1528891270.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:10.397Z,1528891270.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:10.759Z,1528891270.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:10.792Z,1528891270.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:11.181Z,1528891271.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:11.199Z,1528891271.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:11.574Z,1528891271.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:11.592Z,1528891271.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:11.975Z,1528891271.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:11.998Z,1528891271.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:12.359Z,1528891272.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:12.387Z,1528891272.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:12.759Z,1528891272.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:12.786Z,1528891272.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:13.175Z,1528891273.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:13.194Z,1528891273.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:13.579Z,1528891273.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:13.602Z,1528891273.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:13.980Z,1528891273.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:13.998Z,1528891273.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:14.360Z,1528891274.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:14.387Z,1528891274.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:14.759Z,1528891274.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:14.787Z,1528891274.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:15.176Z,1528891275.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:15.195Z,1528891275.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:15.579Z,1528891275.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:15.597Z,1528891275.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:15.970Z,1528891275.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:16.006Z,1528891276.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:16.360Z,1528891276.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:16.394Z,1528891276.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:16.759Z,1528891276.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:16.776Z,1528891276.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:17.173Z,1528891277.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:17.201Z,1528891277.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:17.573Z,1528891277.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:17.600Z,1528891277.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:17.969Z,1528891277.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:18.011Z,1528891278.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:18.359Z,1528891278.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:18.377Z,1528891278.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:18.759Z,1528891278.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:18.777Z,1528891278.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:19.173Z,1528891279.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:19.207Z,1528891279.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:19.569Z,1528891279.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:19.586Z,1528891279.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:19.973Z,1528891279.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:19.991Z,1528891279.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:20.364Z,1528891280.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:20.382Z,1528891280.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:20.764Z,1528891280.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:20.782Z,1528891280.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:21.170Z,1528891281.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:21.187Z,1528891281.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:21.573Z,1528891281.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:21.591Z,1528891281.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:21.973Z,1528891281.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:21.996Z,1528891281.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:22.366Z,1528891282.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:22.383Z,1528891282.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:22.763Z,1528891282.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:22.793Z,1528891282.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:23.174Z,1528891283.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:23.192Z,1528891283.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:23.577Z,1528891283.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:23.595Z,1528891283.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:23.974Z,1528891283.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:23.992Z,1528891283.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:24.366Z,1528891284.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:24.384Z,1528891284.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:24.758Z,1528891284.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:24.782Z,1528891284.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:25.174Z,1528891285.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:25.192Z,1528891285.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:25.575Z,1528891285.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:25.593Z,1528891285.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:25.975Z,1528891285.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:25.993Z,1528891285.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:26.363Z,1528891286.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:26.386Z,1528891286.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:26.762Z,1528891286.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:26.779Z,1528891286.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:27.158Z,1528891287.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:27.190Z,1528891287.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:27.574Z,1528891287.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:27.593Z,1528891287.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:27.975Z,1528891287.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:27.992Z,1528891287.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:28.375Z,1528891288.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:28.400Z,1528891288.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:28.765Z,1528891288.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:28.788Z,1528891288.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:29.166Z,1528891289.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:29.183Z,1528891289.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:29.570Z,1528891289.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:29.588Z,1528891289.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:29.963Z,1528891289.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:29.986Z,1528891289.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:30.375Z,1528891290.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:30.393Z,1528891290.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:30.774Z,1528891290.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:30.796Z,1528891290.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:31.174Z,1528891291.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:31.192Z,1528891291.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:31.566Z,1528891291.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:31.584Z,1528891291.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:31.965Z,1528891291.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:31.983Z,1528891291.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:32.366Z,1528891292.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:32.388Z,1528891292.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:32.763Z,1528891292.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:32.788Z,1528891292.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:33.165Z,1528891293.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:33.183Z,1528891293.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:33.574Z,1528891293.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:33.596Z,1528891293.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:33.977Z,1528891293.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:33.995Z,1528891293.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:34.374Z,1528891294.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:34.393Z,1528891294.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:34.769Z,1528891294.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:34.786Z,1528891294.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:35.170Z,1528891295.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:35.196Z,1528891295.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:38.277Z,1528891298.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:38.300Z,1528891298.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:38.443Z,1528891298.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:38.475Z,1528891298.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:38.852Z,1528891298.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:38.896Z,1528891298.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:39.255Z,1528891299.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:39.280Z,1528891299.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:39.646Z,1528891299.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:39.681Z,1528891299.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:40.034Z,1528891300.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:40.056Z,1528891300.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:40.435Z,1528891300.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:40.458Z,1528891300.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:40.836Z,1528891300.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:40.857Z,1528891300.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:41.245Z,1528891301.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:41.288Z,1528891301.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:41.645Z,1528891301.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:41.689Z,1528891301.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:42.047Z,1528891302.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:42.079Z,1528891302.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:42.437Z,1528891302.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:42.466Z,1528891302.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:42.836Z,1528891302.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:42.887Z,1528891302.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:43.222Z,1528891303.222 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T12:01:43.222Z,1528891303.222 [NAL9602] Data Fault, FailCount= 2
2018-06-13T12:01:43.222Z,1528891303.222 [NAL9602](ERROR): Data Fault
2018-06-13T12:01:43.239Z,1528891303.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:43.258Z,1528891303.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:43.361Z,1528891303.361 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T12:01:43.614Z,1528891303.614 [NAL9602](INFO): Powering down
2018-06-13T12:01:43.644Z,1528891303.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:43.666Z,1528891303.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:44.037Z,1528891304.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:44.059Z,1528891304.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:44.436Z,1528891304.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:44.491Z,1528891304.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:44.569Z,1528891304.569 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T12:01:44.569Z,1528891304.569 [NAL9602] No Fault, FailCount= 2
2018-06-13T12:01:44.832Z,1528891304.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:44.850Z,1528891304.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:45.238Z,1528891305.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:45.263Z,1528891305.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:45.635Z,1528891305.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:45.662Z,1528891305.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:46.032Z,1528891306.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:46.061Z,1528891306.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:46.443Z,1528891306.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:46.491Z,1528891306.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:46.837Z,1528891306.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:46.859Z,1528891306.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:47.232Z,1528891307.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:47.256Z,1528891307.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:47.637Z,1528891307.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:47.654Z,1528891307.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:48.034Z,1528891308.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:48.069Z,1528891308.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:48.426Z,1528891308.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:48.455Z,1528891308.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:48.836Z,1528891308.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:48.859Z,1528891308.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:49.234Z,1528891309.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:49.264Z,1528891309.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:49.626Z,1528891309.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:49.659Z,1528891309.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:50.031Z,1528891310.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:50.088Z,1528891310.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:50.430Z,1528891310.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:50.476Z,1528891310.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:50.830Z,1528891310.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:50.865Z,1528891310.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:51.227Z,1528891311.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:51.263Z,1528891311.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:51.634Z,1528891311.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:51.666Z,1528891311.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:52.027Z,1528891312.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:52.068Z,1528891312.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:52.431Z,1528891312.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:52.459Z,1528891312.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:52.831Z,1528891312.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:52.859Z,1528891312.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:53.231Z,1528891313.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:53.267Z,1528891313.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:53.626Z,1528891313.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:53.664Z,1528891313.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:54.030Z,1528891314.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:54.073Z,1528891314.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:54.426Z,1528891314.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:54.469Z,1528891314.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:54.826Z,1528891314.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:54.845Z,1528891314.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:55.229Z,1528891315.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:55.269Z,1528891315.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:55.634Z,1528891315.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:55.653Z,1528891315.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:56.030Z,1528891316.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:56.048Z,1528891316.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:56.434Z,1528891316.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:56.451Z,1528891316.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:56.830Z,1528891316.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:56.847Z,1528891316.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:57.231Z,1528891317.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:57.250Z,1528891317.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:57.634Z,1528891317.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:57.652Z,1528891317.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:58.036Z,1528891318.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:58.054Z,1528891318.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:58.432Z,1528891318.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:58.450Z,1528891318.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:58.836Z,1528891318.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:58.864Z,1528891318.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:59.236Z,1528891319.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:59.254Z,1528891319.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:01:59.632Z,1528891319.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:01:59.651Z,1528891319.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:00.034Z,1528891320.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:00.057Z,1528891320.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:00.436Z,1528891320.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:00.454Z,1528891320.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:00.833Z,1528891320.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:00.852Z,1528891320.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:01.234Z,1528891321.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:01.257Z,1528891321.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:01.640Z,1528891321.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:01.658Z,1528891321.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:02.036Z,1528891322.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:02.054Z,1528891322.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:02.429Z,1528891322.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:02.462Z,1528891322.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:02.836Z,1528891322.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:02.854Z,1528891322.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:03.232Z,1528891323.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:03.251Z,1528891323.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:03.637Z,1528891323.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:03.655Z,1528891323.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:04.036Z,1528891324.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:04.054Z,1528891324.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:04.433Z,1528891324.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:04.451Z,1528891324.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:04.834Z,1528891324.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:04.857Z,1528891324.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:05.236Z,1528891325.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:05.254Z,1528891325.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:05.633Z,1528891325.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:05.652Z,1528891325.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:06.035Z,1528891326.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:06.065Z,1528891326.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:06.437Z,1528891326.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:06.454Z,1528891326.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:06.826Z,1528891326.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:06.854Z,1528891326.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:07.235Z,1528891327.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:07.260Z,1528891327.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:07.626Z,1528891327.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:07.654Z,1528891327.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:08.036Z,1528891328.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:08.054Z,1528891328.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:08.435Z,1528891328.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:08.459Z,1528891328.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:08.836Z,1528891328.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:08.854Z,1528891328.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:09.226Z,1528891329.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:09.261Z,1528891329.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:09.630Z,1528891329.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:09.667Z,1528891329.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:10.026Z,1528891330.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:10.054Z,1528891330.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:10.426Z,1528891330.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:10.461Z,1528891330.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:10.830Z,1528891330.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:10.866Z,1528891330.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:11.226Z,1528891331.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:11.259Z,1528891331.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:11.626Z,1528891331.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:11.663Z,1528891331.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:12.030Z,1528891332.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:12.066Z,1528891332.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:12.430Z,1528891332.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:12.458Z,1528891332.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:12.826Z,1528891332.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:12.859Z,1528891332.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:13.236Z,1528891333.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:13.263Z,1528891333.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:13.630Z,1528891333.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:13.658Z,1528891333.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:14.014Z,1528891334.014 [NAL9602](INFO): Powering up NAL9602
2018-06-13T12:02:14.031Z,1528891334.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:14.063Z,1528891334.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:14.430Z,1528891334.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:14.460Z,1528891334.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:14.834Z,1528891334.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:14.862Z,1528891334.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:15.227Z,1528891335.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:15.254Z,1528891335.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:15.635Z,1528891335.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:15.668Z,1528891335.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:16.031Z,1528891336.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:16.070Z,1528891336.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:16.427Z,1528891336.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:16.453Z,1528891336.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:16.831Z,1528891336.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:16.865Z,1528891336.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:17.226Z,1528891337.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:17.252Z,1528891337.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:17.626Z,1528891337.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:17.645Z,1528891337.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:18.031Z,1528891338.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:18.049Z,1528891338.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:18.434Z,1528891338.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:18.452Z,1528891338.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:18.828Z,1528891338.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:18.846Z,1528891338.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:19.234Z,1528891339.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:19.251Z,1528891339.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:19.633Z,1528891339.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:19.650Z,1528891339.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:20.033Z,1528891340.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:20.052Z,1528891340.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:20.434Z,1528891340.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:20.451Z,1528891340.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:20.832Z,1528891340.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:20.856Z,1528891340.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:21.232Z,1528891341.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:21.250Z,1528891341.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:21.634Z,1528891341.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:21.651Z,1528891341.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:22.031Z,1528891342.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:22.056Z,1528891342.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:22.431Z,1528891342.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:22.449Z,1528891342.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:22.834Z,1528891342.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:22.856Z,1528891342.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:23.231Z,1528891343.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:23.249Z,1528891343.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:23.632Z,1528891343.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:23.650Z,1528891343.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:24.034Z,1528891344.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:24.051Z,1528891344.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:24.445Z,1528891344.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:24.483Z,1528891344.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:24.817Z,1528891344.817 [NAL9602](INFO): NAL9602 initialized
2018-06-13T12:02:24.835Z,1528891344.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:24.853Z,1528891344.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:25.234Z,1528891345.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:25.252Z,1528891345.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:25.645Z,1528891345.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:25.679Z,1528891345.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:26.049Z,1528891346.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:26.083Z,1528891346.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:26.442Z,1528891346.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:26.459Z,1528891346.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:26.837Z,1528891346.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:26.856Z,1528891346.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:27.235Z,1528891347.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:27.261Z,1528891347.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:27.637Z,1528891347.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:27.655Z,1528891347.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:28.045Z,1528891348.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:28.064Z,1528891348.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:28.443Z,1528891348.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:28.460Z,1528891348.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:28.841Z,1528891348.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:28.859Z,1528891348.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:29.238Z,1528891349.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:29.256Z,1528891349.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:29.636Z,1528891349.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:29.654Z,1528891349.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:30.037Z,1528891350.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:30.055Z,1528891350.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:30.435Z,1528891350.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:30.468Z,1528891350.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:30.844Z,1528891350.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:30.868Z,1528891350.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:31.245Z,1528891351.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:31.263Z,1528891351.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:31.647Z,1528891351.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:31.665Z,1528891351.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:32.031Z,1528891352.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:32.068Z,1528891352.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:32.435Z,1528891352.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:32.471Z,1528891352.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:32.838Z,1528891352.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:32.856Z,1528891352.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:33.239Z,1528891353.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:33.257Z,1528891353.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:33.640Z,1528891353.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:33.659Z,1528891353.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:34.049Z,1528891354.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:34.072Z,1528891354.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:37.157Z,1528891357.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:37.175Z,1528891357.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:37.336Z,1528891357.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:37.372Z,1528891357.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:37.715Z,1528891357.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:37.755Z,1528891357.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:38.113Z,1528891358.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:38.153Z,1528891358.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:38.511Z,1528891358.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:38.545Z,1528891358.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:38.925Z,1528891358.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:38.961Z,1528891358.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:39.322Z,1528891359.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:39.360Z,1528891359.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:39.722Z,1528891359.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:39.765Z,1528891359.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:40.111Z,1528891360.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:40.147Z,1528891360.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:40.515Z,1528891360.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:40.563Z,1528891360.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:40.914Z,1528891360.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:40.933Z,1528891360.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:41.314Z,1528891361.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:41.333Z,1528891361.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:41.718Z,1528891361.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:41.742Z,1528891361.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:42.125Z,1528891362.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:42.148Z,1528891362.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:42.525Z,1528891362.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:42.544Z,1528891362.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:42.918Z,1528891362.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:42.935Z,1528891362.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:43.315Z,1528891363.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:43.343Z,1528891363.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:43.726Z,1528891363.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:43.753Z,1528891363.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:44.130Z,1528891364.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:44.157Z,1528891364.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:44.531Z,1528891364.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:44.554Z,1528891364.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:44.912Z,1528891364.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:44.952Z,1528891364.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:45.307Z,1528891365.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:45.334Z,1528891365.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:45.723Z,1528891365.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:45.741Z,1528891365.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:46.132Z,1528891366.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:46.155Z,1528891366.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:46.529Z,1528891366.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:46.551Z,1528891366.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:46.912Z,1528891366.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:46.946Z,1528891366.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:47.311Z,1528891367.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:47.349Z,1528891367.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:47.728Z,1528891367.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:47.757Z,1528891367.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:48.130Z,1528891368.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:48.152Z,1528891368.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:48.532Z,1528891368.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:48.551Z,1528891368.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:48.912Z,1528891368.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:48.947Z,1528891368.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:49.311Z,1528891369.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:49.344Z,1528891369.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:49.732Z,1528891369.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:49.755Z,1528891369.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:50.130Z,1528891370.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:50.147Z,1528891370.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:50.527Z,1528891370.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:50.545Z,1528891370.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:50.907Z,1528891370.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:50.945Z,1528891370.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:51.311Z,1528891371.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:51.347Z,1528891371.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:51.728Z,1528891371.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:51.745Z,1528891371.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:52.131Z,1528891372.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:52.148Z,1528891372.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:52.527Z,1528891372.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:52.545Z,1528891372.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:52.912Z,1528891372.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:52.952Z,1528891372.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:53.311Z,1528891373.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:53.350Z,1528891373.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:53.728Z,1528891373.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:53.752Z,1528891373.752 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:53.752Z,1528891373.752 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 172
2018-06-13T12:02:53.752Z,1528891373.752 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:02:53.754Z,1528891373.754 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:53.754Z,1528891373.754 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 172
2018-06-13T12:02:53.754Z,1528891373.754 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:02:53.756Z,1528891373.756 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:53.756Z,1528891373.756 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 172
2018-06-13T12:02:53.756Z,1528891373.756 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:02:53.837Z,1528891373.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:02:53.837Z,1528891373.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:02:53.838Z,1528891373.838 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:02:54.139Z,1528891374.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:54.241Z,1528891374.241 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:02:54.241Z,1528891374.241 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 172
2018-06-13T12:02:54.242Z,1528891374.242 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:02:54.242Z,1528891374.242 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 172
2018-06-13T12:02:54.242Z,1528891374.242 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:02:54.242Z,1528891374.242 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 172
2018-06-13T12:02:54.532Z,1528891374.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:54.553Z,1528891374.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:02:54.554Z,1528891374.554 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:02:54.555Z,1528891374.555 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:02:54.555Z,1528891374.555 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:02:54.556Z,1528891374.556 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:02:54.556Z,1528891374.556 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:02:54.556Z,1528891374.556 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:02:54.557Z,1528891374.557 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:02:54.557Z,1528891374.557 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:02:54.911Z,1528891374.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:54.936Z,1528891374.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:02:54.953Z,1528891374.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:55.314Z,1528891375.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:55.331Z,1528891375.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:02:55.332Z,1528891375.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:55.725Z,1528891375.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:55.765Z,1528891375.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:02:55.767Z,1528891375.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:56.126Z,1528891376.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:56.168Z,1528891376.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:02:56.169Z,1528891376.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:56.522Z,1528891376.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:56.539Z,1528891376.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:02:56.540Z,1528891376.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:56.918Z,1528891376.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:56.935Z,1528891376.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:02:56.936Z,1528891376.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:57.317Z,1528891377.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:57.334Z,1528891377.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:02:57.335Z,1528891377.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:57.726Z,1528891377.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:57.743Z,1528891377.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:02:57.744Z,1528891377.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:58.133Z,1528891378.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:58.150Z,1528891378.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T12:02:58.151Z,1528891378.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:58.527Z,1528891378.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:58.545Z,1528891378.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:02:58.546Z,1528891378.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:58.912Z,1528891378.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:58.945Z,1528891378.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:02:58.946Z,1528891378.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:59.311Z,1528891379.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:59.339Z,1528891379.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:02:59.340Z,1528891379.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:02:59.727Z,1528891379.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:02:59.745Z,1528891379.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:02:59.746Z,1528891379.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:00.130Z,1528891380.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:00.148Z,1528891380.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T12:03:00.149Z,1528891380.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:00.525Z,1528891380.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:00.562Z,1528891380.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T12:03:00.563Z,1528891380.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:00.913Z,1528891380.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:00.946Z,1528891380.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T12:03:00.947Z,1528891380.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:01.311Z,1528891381.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:01.328Z,1528891381.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:03:01.329Z,1528891381.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:01.733Z,1528891381.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:01.762Z,1528891381.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:03:01.763Z,1528891381.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:02.128Z,1528891382.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:02.156Z,1528891382.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T12:03:02.157Z,1528891382.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:02.525Z,1528891382.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:02.562Z,1528891382.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:03:02.563Z,1528891382.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:02.917Z,1528891382.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:02.935Z,1528891382.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:03:02.936Z,1528891382.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:03.314Z,1528891383.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:03.332Z,1528891383.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:03:03.333Z,1528891383.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:03.725Z,1528891383.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:03.743Z,1528891383.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:03:03.744Z,1528891383.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:04.126Z,1528891384.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:04.148Z,1528891384.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:03:04.165Z,1528891384.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:04.523Z,1528891384.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:04.540Z,1528891384.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:03:04.541Z,1528891384.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:04.921Z,1528891384.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:04.939Z,1528891384.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:03:04.940Z,1528891384.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:05.315Z,1528891385.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:05.340Z,1528891385.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:03:05.341Z,1528891385.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:05.727Z,1528891385.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:05.752Z,1528891385.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:03:05.769Z,1528891385.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:06.126Z,1528891386.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:06.148Z,1528891386.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:03:06.149Z,1528891386.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:06.531Z,1528891386.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:06.549Z,1528891386.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:03:06.550Z,1528891386.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:06.918Z,1528891386.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:06.935Z,1528891386.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:03:06.936Z,1528891386.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:07.307Z,1528891387.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:07.348Z,1528891387.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:03:07.349Z,1528891387.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:07.732Z,1528891387.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:07.750Z,1528891387.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:03:07.751Z,1528891387.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:08.131Z,1528891388.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:08.148Z,1528891388.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:03:08.150Z,1528891388.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:08.521Z,1528891388.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:08.544Z,1528891388.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T12:03:08.545Z,1528891388.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:08.916Z,1528891388.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:08.948Z,1528891388.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:03:08.950Z,1528891388.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:09.311Z,1528891389.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:09.344Z,1528891389.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:03:09.345Z,1528891389.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:09.728Z,1528891389.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:09.745Z,1528891389.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:03:09.746Z,1528891389.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:10.136Z,1528891390.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:10.154Z,1528891390.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:03:10.155Z,1528891390.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:10.517Z,1528891390.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:10.555Z,1528891390.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:03:10.556Z,1528891390.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:10.911Z,1528891390.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:10.950Z,1528891390.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:03:10.951Z,1528891390.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:11.312Z,1528891391.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:11.345Z,1528891391.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:03:11.346Z,1528891391.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:11.711Z,1528891391.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:11.728Z,1528891391.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:03:11.729Z,1528891391.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:12.125Z,1528891392.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:12.159Z,1528891392.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:03:12.160Z,1528891392.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:12.529Z,1528891392.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:12.564Z,1528891392.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:03:12.565Z,1528891392.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:12.925Z,1528891392.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:12.959Z,1528891392.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:03:12.960Z,1528891392.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:13.315Z,1528891393.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:13.332Z,1528891393.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:03:13.333Z,1528891393.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:13.714Z,1528891393.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:13.732Z,1528891393.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T12:03:13.733Z,1528891393.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:14.112Z,1528891394.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:14.138Z,1528891394.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:14.510Z,1528891394.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:14.548Z,1528891394.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:14.932Z,1528891394.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:14.950Z,1528891394.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:15.327Z,1528891395.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:15.344Z,1528891395.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:15.728Z,1528891395.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:15.746Z,1528891395.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:16.111Z,1528891396.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:16.141Z,1528891396.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:16.511Z,1528891396.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:16.539Z,1528891396.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:16.908Z,1528891396.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:16.949Z,1528891396.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:17.312Z,1528891397.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:17.348Z,1528891397.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:17.707Z,1528891397.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:17.745Z,1528891397.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:18.121Z,1528891398.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:18.159Z,1528891398.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:18.533Z,1528891398.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:18.551Z,1528891398.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:18.918Z,1528891398.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:18.956Z,1528891398.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:19.312Z,1528891399.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:19.346Z,1528891399.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:19.707Z,1528891399.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:19.725Z,1528891399.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:20.112Z,1528891400.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:20.152Z,1528891400.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:20.515Z,1528891400.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:20.533Z,1528891400.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:20.925Z,1528891400.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:20.963Z,1528891400.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:21.326Z,1528891401.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:21.365Z,1528891401.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:21.726Z,1528891401.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:21.744Z,1528891401.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:22.116Z,1528891402.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:22.134Z,1528891402.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:22.516Z,1528891402.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:22.533Z,1528891402.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:22.915Z,1528891402.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:22.932Z,1528891402.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:23.317Z,1528891403.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:23.334Z,1528891403.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:23.716Z,1528891403.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:23.740Z,1528891403.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:24.122Z,1528891404.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:24.140Z,1528891404.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:24.525Z,1528891404.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:24.542Z,1528891404.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:24.922Z,1528891404.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:24.939Z,1528891404.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:25.315Z,1528891405.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:25.332Z,1528891405.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:25.712Z,1528891405.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:25.730Z,1528891405.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:26.117Z,1528891406.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:26.136Z,1528891406.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:26.516Z,1528891406.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:26.534Z,1528891406.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:26.925Z,1528891406.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:26.943Z,1528891406.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:27.325Z,1528891407.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:27.343Z,1528891407.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:27.722Z,1528891407.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:27.744Z,1528891407.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:28.117Z,1528891408.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:28.135Z,1528891408.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:28.517Z,1528891408.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:28.535Z,1528891408.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:28.921Z,1528891408.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:28.939Z,1528891408.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:29.314Z,1528891409.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:29.331Z,1528891409.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:29.711Z,1528891409.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:29.742Z,1528891409.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:30.120Z,1528891410.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:30.155Z,1528891410.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:30.526Z,1528891410.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:30.544Z,1528891410.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:30.927Z,1528891410.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:30.952Z,1528891410.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:31.317Z,1528891411.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:31.335Z,1528891411.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:31.714Z,1528891411.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:31.736Z,1528891411.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:32.115Z,1528891412.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:32.139Z,1528891412.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:32.515Z,1528891412.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:32.537Z,1528891412.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:32.925Z,1528891412.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:32.944Z,1528891412.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:33.326Z,1528891413.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:33.348Z,1528891413.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:33.726Z,1528891413.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:33.748Z,1528891413.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:34.122Z,1528891414.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:34.139Z,1528891414.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:37.231Z,1528891417.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:37.250Z,1528891417.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:37.273Z,1528891417.273 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T11:58:36.9Z
2018-06-13T12:03:37.273Z,1528891417.273 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T12:03:37.273Z,1528891417.273 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T12:03:37.391Z,1528891417.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:37.433Z,1528891417.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:38.553Z,1528891418.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:38.581Z,1528891418.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:38.726Z,1528891418.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:38.744Z,1528891418.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:39.124Z,1528891419.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:39.148Z,1528891419.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:39.504Z,1528891419.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:39.539Z,1528891419.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:39.903Z,1528891419.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:39.940Z,1528891419.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:40.308Z,1528891420.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:40.335Z,1528891420.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:40.707Z,1528891420.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:40.737Z,1528891420.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:41.119Z,1528891421.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:41.138Z,1528891421.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:41.522Z,1528891421.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:41.546Z,1528891421.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:41.928Z,1528891421.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:41.947Z,1528891421.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:42.303Z,1528891422.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:42.335Z,1528891422.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:42.707Z,1528891422.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:42.734Z,1528891422.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:45.845Z,1528891425.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:45.886Z,1528891425.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:45.974Z,1528891425.974 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0200.lzma
2018-06-13T12:03:45.995Z,1528891425.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:46.048Z,1528891426.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:46.406Z,1528891426.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:46.436Z,1528891426.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:46.775Z,1528891426.775 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0200.lzma.bak
2018-06-13T12:03:46.775Z,1528891426.775 [DataOverHttps](INFO): SBD MOMSN=8329188
2018-06-13T12:03:46.831Z,1528891426.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:46.849Z,1528891426.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:48.706Z,1528891428.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:48.738Z,1528891428.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:48.855Z,1528891428.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:48.896Z,1528891428.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:51.996Z,1528891431.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:52.014Z,1528891432.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:52.159Z,1528891432.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:52.193Z,1528891432.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:52.584Z,1528891432.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:52.603Z,1528891432.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:52.987Z,1528891432.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:53.012Z,1528891433.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:53.388Z,1528891433.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:53.409Z,1528891433.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:53.767Z,1528891433.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:53.803Z,1528891433.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:54.168Z,1528891434.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:54.202Z,1528891434.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:54.563Z,1528891434.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:54.590Z,1528891434.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:54.983Z,1528891434.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:55.002Z,1528891435.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:58.097Z,1528891438.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:58.116Z,1528891438.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:58.231Z,1528891438.231 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0201.lzma
2018-06-13T12:03:58.282Z,1528891438.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:58.312Z,1528891438.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:58.655Z,1528891438.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:58.692Z,1528891438.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:03:59.030Z,1528891439.030 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0201.lzma.bak
2018-06-13T12:03:59.030Z,1528891439.030 [DataOverHttps](INFO): SBD MOMSN=8329190
2018-06-13T12:03:59.068Z,1528891439.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:03:59.106Z,1528891439.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:00.958Z,1528891440.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:01.003Z,1528891441.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:01.006Z,1528891441.006 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T12:04:01.006Z,1528891441.006 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T12:04:01.006Z,1528891441.006 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T12:04:01.145Z,1528891441.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:01.162Z,1528891441.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:01.541Z,1528891441.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:01.559Z,1528891441.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:01.929Z,1528891441.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:01.969Z,1528891441.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:02.319Z,1528891442.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:02.353Z,1528891442.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:05.432Z,1528891445.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:05.461Z,1528891445.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:05.575Z,1528891445.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:05.616Z,1528891445.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:05.994Z,1528891445.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:06.028Z,1528891446.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:06.398Z,1528891446.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:06.435Z,1528891446.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:06.790Z,1528891446.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:06.823Z,1528891446.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:07.183Z,1528891447.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:07.200Z,1528891447.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:07.583Z,1528891447.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:07.601Z,1528891447.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:07.978Z,1528891447.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:07.997Z,1528891447.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:08.383Z,1528891448.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:08.408Z,1528891448.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:08.783Z,1528891448.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:08.801Z,1528891448.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:09.190Z,1528891449.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:09.208Z,1528891449.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:09.594Z,1528891449.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:09.632Z,1528891449.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:09.994Z,1528891449.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:10.013Z,1528891450.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:10.379Z,1528891450.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:10.411Z,1528891450.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:10.782Z,1528891450.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:10.816Z,1528891450.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:11.184Z,1528891451.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:11.216Z,1528891451.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:11.582Z,1528891451.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:11.604Z,1528891451.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:11.994Z,1528891451.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:12.013Z,1528891452.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:12.395Z,1528891452.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:12.420Z,1528891452.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:12.791Z,1528891452.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:12.810Z,1528891452.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:13.183Z,1528891453.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:13.212Z,1528891453.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:13.586Z,1528891453.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:13.612Z,1528891453.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:13.979Z,1528891453.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:14.006Z,1528891454.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:14.380Z,1528891454.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:14.415Z,1528891454.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:14.779Z,1528891454.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:14.808Z,1528891454.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:15.195Z,1528891455.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:15.213Z,1528891455.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:15.600Z,1528891455.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:15.617Z,1528891455.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:15.000Z,1528891456.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:16.018Z,1528891456.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:16.375Z,1528891456.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:16.500Z,1528891456.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:16.780Z,1528891456.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:16.868Z,1528891456.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:17.180Z,1528891457.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:17.229Z,1528891457.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:17.575Z,1528891457.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:17.607Z,1528891457.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:18.014Z,1528891458.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:18.111Z,1528891458.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:18.394Z,1528891458.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:18.488Z,1528891458.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:18.794Z,1528891458.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:18.827Z,1528891458.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:19.182Z,1528891459.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:19.200Z,1528891459.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:19.582Z,1528891459.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:19.600Z,1528891459.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:19.981Z,1528891459.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:19.999Z,1528891459.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:20.387Z,1528891460.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:20.405Z,1528891460.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:20.780Z,1528891460.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:20.798Z,1528891460.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:21.186Z,1528891461.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:21.204Z,1528891461.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:21.593Z,1528891461.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:21.611Z,1528891461.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:21.993Z,1528891461.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:22.016Z,1528891462.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:22.383Z,1528891462.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:22.401Z,1528891462.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:22.784Z,1528891462.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:22.802Z,1528891462.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:23.183Z,1528891463.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:23.208Z,1528891463.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:23.579Z,1528891463.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:23.611Z,1528891463.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:23.989Z,1528891463.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:24.008Z,1528891464.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:24.394Z,1528891464.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:24.411Z,1528891464.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:24.787Z,1528891464.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:24.805Z,1528891464.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:25.185Z,1528891465.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:25.203Z,1528891465.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:25.582Z,1528891465.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:25.599Z,1528891465.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:25.979Z,1528891465.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:26.009Z,1528891466.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:26.383Z,1528891466.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:26.416Z,1528891466.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:26.786Z,1528891466.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:26.804Z,1528891466.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:27.191Z,1528891467.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:27.210Z,1528891467.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:27.593Z,1528891467.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:27.616Z,1528891467.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:27.991Z,1528891467.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:28.012Z,1528891468.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:28.379Z,1528891468.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:28.411Z,1528891468.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:28.784Z,1528891468.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:28.802Z,1528891468.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:29.186Z,1528891469.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:29.212Z,1528891469.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:29.585Z,1528891469.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:29.603Z,1528891469.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:29.990Z,1528891469.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:30.008Z,1528891470.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:30.390Z,1528891470.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:30.408Z,1528891470.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:30.788Z,1528891470.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:30.820Z,1528891470.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:31.183Z,1528891471.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:31.207Z,1528891471.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:31.586Z,1528891471.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:31.603Z,1528891471.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:31.975Z,1528891471.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:32.009Z,1528891472.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:32.380Z,1528891472.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:32.416Z,1528891472.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:32.775Z,1528891472.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:32.812Z,1528891472.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:33.185Z,1528891473.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:33.212Z,1528891473.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:33.600Z,1528891473.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:33.618Z,1528891473.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:33.998Z,1528891473.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:34.029Z,1528891474.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:34.375Z,1528891474.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:34.393Z,1528891474.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:34.779Z,1528891474.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:34.796Z,1528891474.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:35.175Z,1528891475.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:35.193Z,1528891475.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:35.579Z,1528891475.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:35.604Z,1528891475.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:35.993Z,1528891475.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:36.030Z,1528891476.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:36.393Z,1528891476.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:36.434Z,1528891476.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:36.793Z,1528891476.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:36.830Z,1528891476.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:37.182Z,1528891477.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:37.200Z,1528891477.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:37.581Z,1528891477.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:37.599Z,1528891477.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:37.982Z,1528891477.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:37.000Z,1528891478.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:38.382Z,1528891478.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:38.404Z,1528891478.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:38.782Z,1528891478.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:38.800Z,1528891478.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:39.193Z,1528891479.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:39.229Z,1528891479.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:39.593Z,1528891479.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:39.629Z,1528891479.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:39.993Z,1528891479.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:40.035Z,1528891480.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:40.382Z,1528891480.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:40.400Z,1528891480.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:40.782Z,1528891480.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:40.801Z,1528891480.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:41.182Z,1528891481.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:41.200Z,1528891481.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:41.582Z,1528891481.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:41.600Z,1528891481.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:41.993Z,1528891481.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:42.032Z,1528891482.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:42.393Z,1528891482.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:42.411Z,1528891482.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:42.786Z,1528891482.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:42.805Z,1528891482.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:43.184Z,1528891483.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:43.202Z,1528891483.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:43.583Z,1528891483.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:43.604Z,1528891483.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:43.984Z,1528891483.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:44.002Z,1528891484.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:44.384Z,1528891484.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:44.412Z,1528891484.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:44.786Z,1528891484.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:44.804Z,1528891484.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:45.191Z,1528891485.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:45.209Z,1528891485.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:45.598Z,1528891485.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:45.636Z,1528891485.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:45.993Z,1528891485.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:46.016Z,1528891486.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:46.383Z,1528891486.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:46.401Z,1528891486.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:46.783Z,1528891486.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:46.814Z,1528891486.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:47.187Z,1528891487.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:47.205Z,1528891487.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:47.586Z,1528891487.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:47.604Z,1528891487.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:47.991Z,1528891487.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:48.016Z,1528891488.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:48.394Z,1528891488.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:48.416Z,1528891488.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:48.799Z,1528891488.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:48.817Z,1528891488.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:49.183Z,1528891489.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:49.212Z,1528891489.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:49.579Z,1528891489.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:49.610Z,1528891489.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:49.975Z,1528891489.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:50.003Z,1528891490.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:50.391Z,1528891490.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:50.409Z,1528891490.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:50.790Z,1528891490.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:50.814Z,1528891490.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:51.188Z,1528891491.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:51.215Z,1528891491.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:51.599Z,1528891491.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:51.617Z,1528891491.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:52.003Z,1528891492.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:52.022Z,1528891492.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:52.379Z,1528891492.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:52.416Z,1528891492.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:52.779Z,1528891492.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:52.815Z,1528891492.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:53.180Z,1528891493.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:53.211Z,1528891493.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:53.577Z,1528891493.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:53.611Z,1528891493.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:53.999Z,1528891493.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:54.017Z,1528891494.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:54.400Z,1528891494.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:54.418Z,1528891494.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:54.791Z,1528891494.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:54.809Z,1528891494.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:55.187Z,1528891495.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:55.224Z,1528891495.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:55.580Z,1528891495.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:55.611Z,1528891495.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:55.979Z,1528891495.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:56.015Z,1528891496.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:56.380Z,1528891496.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:56.415Z,1528891496.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:56.789Z,1528891496.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:56.811Z,1528891496.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:57.199Z,1528891497.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:57.217Z,1528891497.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:57.602Z,1528891497.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:57.624Z,1528891497.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:58.000Z,1528891498.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:58.018Z,1528891498.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:58.378Z,1528891498.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:58.411Z,1528891498.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:58.786Z,1528891498.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:58.809Z,1528891498.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:59.190Z,1528891499.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:59.208Z,1528891499.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:59.579Z,1528891499.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:04:59.616Z,1528891499.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:04:59.995Z,1528891499.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:00.024Z,1528891500.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:00.400Z,1528891500.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:00.418Z,1528891500.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:00.789Z,1528891500.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:00.823Z,1528891500.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:01.183Z,1528891501.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:01.220Z,1528891501.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:01.585Z,1528891501.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:01.615Z,1528891501.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:01.983Z,1528891501.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:02.010Z,1528891502.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:02.384Z,1528891502.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:02.420Z,1528891502.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:02.783Z,1528891502.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:02.821Z,1528891502.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:03.195Z,1528891503.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:03.223Z,1528891503.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:03.597Z,1528891503.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:03.626Z,1528891503.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:03.998Z,1528891503.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:04.029Z,1528891504.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:04.383Z,1528891504.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:04.423Z,1528891504.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:04.786Z,1528891504.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:04.825Z,1528891504.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:05.186Z,1528891505.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:05.225Z,1528891505.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:08.300Z,1528891508.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:08.327Z,1528891508.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:08.466Z,1528891508.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:08.483Z,1528891508.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:08.861Z,1528891508.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:08.879Z,1528891508.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:09.260Z,1528891509.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:09.278Z,1528891509.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:09.640Z,1528891509.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:09.673Z,1528891509.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:10.039Z,1528891510.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:10.069Z,1528891510.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:10.440Z,1528891510.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:10.458Z,1528891510.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:10.838Z,1528891510.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:10.857Z,1528891510.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:11.254Z,1528891511.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:11.288Z,1528891511.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:11.653Z,1528891511.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:11.690Z,1528891511.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:12.054Z,1528891512.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:12.095Z,1528891512.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:12.442Z,1528891512.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:12.459Z,1528891512.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:12.842Z,1528891512.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:12.864Z,1528891512.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:13.245Z,1528891513.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:13.263Z,1528891513.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:13.642Z,1528891513.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:13.659Z,1528891513.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:14.053Z,1528891514.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:14.071Z,1528891514.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:14.453Z,1528891514.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:14.471Z,1528891514.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:14.854Z,1528891514.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:14.876Z,1528891514.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:15.244Z,1528891515.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:15.262Z,1528891515.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:15.644Z,1528891515.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:15.662Z,1528891515.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:16.041Z,1528891516.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:16.058Z,1528891516.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:16.445Z,1528891516.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:16.463Z,1528891516.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:16.844Z,1528891516.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:16.861Z,1528891516.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:17.253Z,1528891517.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:17.271Z,1528891517.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:17.653Z,1528891517.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:17.671Z,1528891517.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:18.049Z,1528891518.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:18.067Z,1528891518.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:18.444Z,1528891518.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:18.462Z,1528891518.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:18.844Z,1528891518.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:18.868Z,1528891518.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:19.246Z,1528891519.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:19.268Z,1528891519.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:19.645Z,1528891519.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:19.663Z,1528891519.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:20.050Z,1528891520.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:20.067Z,1528891520.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:20.453Z,1528891520.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:20.471Z,1528891520.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:20.853Z,1528891520.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:20.876Z,1528891520.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:21.244Z,1528891521.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:21.262Z,1528891521.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:21.644Z,1528891521.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:21.662Z,1528891521.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:22.045Z,1528891522.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:22.062Z,1528891522.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:22.445Z,1528891522.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:22.463Z,1528891522.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:22.844Z,1528891522.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:22.861Z,1528891522.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:23.253Z,1528891523.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:23.271Z,1528891523.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:23.653Z,1528891523.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:23.671Z,1528891523.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:24.057Z,1528891524.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:24.075Z,1528891524.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:24.446Z,1528891524.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:24.463Z,1528891524.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:24.845Z,1528891524.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:24.862Z,1528891524.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:25.243Z,1528891525.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:25.274Z,1528891525.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:25.645Z,1528891525.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:25.663Z,1528891525.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:26.050Z,1528891526.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:26.072Z,1528891526.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:26.454Z,1528891526.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:26.472Z,1528891526.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:26.853Z,1528891526.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:26.876Z,1528891526.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:27.250Z,1528891527.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:27.268Z,1528891527.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:27.648Z,1528891527.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:27.666Z,1528891527.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:28.046Z,1528891528.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:28.063Z,1528891528.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:28.446Z,1528891528.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:28.463Z,1528891528.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:28.849Z,1528891528.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:28.866Z,1528891528.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:29.258Z,1528891529.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:29.275Z,1528891529.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:29.653Z,1528891529.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:29.671Z,1528891529.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:30.051Z,1528891530.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:30.068Z,1528891530.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:30.448Z,1528891530.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:30.472Z,1528891530.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:30.848Z,1528891530.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:30.866Z,1528891530.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:31.244Z,1528891531.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:31.275Z,1528891531.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:31.643Z,1528891531.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:31.668Z,1528891531.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:32.058Z,1528891532.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:32.075Z,1528891532.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:32.457Z,1528891532.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:32.475Z,1528891532.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:32.855Z,1528891532.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:32.876Z,1528891532.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:33.250Z,1528891533.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:33.268Z,1528891533.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:33.647Z,1528891533.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:33.665Z,1528891533.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:34.047Z,1528891534.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:34.070Z,1528891534.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:34.450Z,1528891534.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:34.468Z,1528891534.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:34.843Z,1528891534.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:34.866Z,1528891534.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:35.255Z,1528891535.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:35.280Z,1528891535.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:35.657Z,1528891535.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:35.676Z,1528891535.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:36.055Z,1528891536.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:36.072Z,1528891536.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:36.446Z,1528891536.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:36.463Z,1528891536.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:36.848Z,1528891536.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:36.866Z,1528891536.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:37.250Z,1528891537.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:37.272Z,1528891537.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:37.646Z,1528891537.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:37.663Z,1528891537.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:38.054Z,1528891538.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:38.073Z,1528891538.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:38.456Z,1528891538.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:38.474Z,1528891538.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:38.855Z,1528891538.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:38.873Z,1528891538.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:39.249Z,1528891539.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:39.267Z,1528891539.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:39.649Z,1528891539.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:39.666Z,1528891539.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:40.046Z,1528891540.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:40.071Z,1528891540.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:40.450Z,1528891540.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:40.467Z,1528891540.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:40.850Z,1528891540.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:40.872Z,1528891540.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:41.257Z,1528891541.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:41.275Z,1528891541.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:41.659Z,1528891541.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:41.676Z,1528891541.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:42.054Z,1528891542.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:42.072Z,1528891542.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:42.451Z,1528891542.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:42.469Z,1528891542.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:42.849Z,1528891542.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:42.872Z,1528891542.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:43.254Z,1528891543.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:43.272Z,1528891543.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:43.654Z,1528891543.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:43.672Z,1528891543.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:44.059Z,1528891544.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:44.076Z,1528891544.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:44.458Z,1528891544.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:44.480Z,1528891544.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:44.863Z,1528891544.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:44.891Z,1528891544.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:45.238Z,1528891545.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:45.275Z,1528891545.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:45.644Z,1528891545.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:45.676Z,1528891545.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:46.044Z,1528891546.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:46.080Z,1528891546.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:46.436Z,1528891546.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:46.469Z,1528891546.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:46.842Z,1528891546.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:46.888Z,1528891546.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:47.258Z,1528891547.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:47.292Z,1528891547.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:47.665Z,1528891547.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:47.683Z,1528891547.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:48.060Z,1528891548.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:48.078Z,1528891548.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:48.442Z,1528891548.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:48.485Z,1528891548.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:48.838Z,1528891548.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:48.871Z,1528891548.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:49.242Z,1528891549.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:49.276Z,1528891549.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:49.635Z,1528891549.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:49.688Z,1528891549.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:50.052Z,1528891550.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:50.084Z,1528891550.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:50.454Z,1528891550.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:50.487Z,1528891550.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:50.857Z,1528891550.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:50.887Z,1528891550.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:51.242Z,1528891551.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:51.291Z,1528891551.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:51.643Z,1528891551.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:51.690Z,1528891551.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:52.045Z,1528891552.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:52.063Z,1528891552.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:52.447Z,1528891552.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:52.465Z,1528891552.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:52.842Z,1528891552.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:52.885Z,1528891552.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:53.259Z,1528891553.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:53.296Z,1528891553.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:53.652Z,1528891553.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:53.687Z,1528891553.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:54.057Z,1528891554.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:54.090Z,1528891554.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:54.442Z,1528891554.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:54.488Z,1528891554.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:54.842Z,1528891554.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:54.864Z,1528891554.864 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:54.864Z,1528891554.864 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 173
2018-06-13T12:05:54.864Z,1528891554.864 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:05:54.866Z,1528891554.866 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:54.866Z,1528891554.866 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 173
2018-06-13T12:05:54.866Z,1528891554.866 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:05:54.868Z,1528891554.868 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:54.868Z,1528891554.868 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 173
2018-06-13T12:05:54.868Z,1528891554.868 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:05:54.961Z,1528891554.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:05:54.961Z,1528891554.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:05:54.962Z,1528891554.962 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:05:55.254Z,1528891555.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:55.353Z,1528891555.353 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:05:55.353Z,1528891555.353 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 173
2018-06-13T12:05:55.354Z,1528891555.354 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:05:55.354Z,1528891555.354 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 173
2018-06-13T12:05:55.354Z,1528891555.354 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:05:55.354Z,1528891555.354 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 173
2018-06-13T12:05:55.646Z,1528891555.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:55.670Z,1528891555.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:05:55.670Z,1528891555.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:05:55.671Z,1528891555.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:05:55.671Z,1528891555.671 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:05:55.671Z,1528891555.671 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:05:55.672Z,1528891555.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:05:55.672Z,1528891555.672 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:05:55.672Z,1528891555.672 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:05:55.673Z,1528891555.673 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:05:56.056Z,1528891556.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:56.078Z,1528891556.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:05:56.079Z,1528891556.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:56.467Z,1528891556.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:56.485Z,1528891556.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:05:56.486Z,1528891556.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:56.866Z,1528891556.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:56.883Z,1528891556.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:05:56.884Z,1528891556.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:57.242Z,1528891557.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:57.269Z,1528891557.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:05:57.270Z,1528891557.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:57.643Z,1528891557.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:57.688Z,1528891557.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:05:57.688Z,1528891557.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:58.039Z,1528891558.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:58.073Z,1528891558.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:05:58.074Z,1528891558.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:58.440Z,1528891558.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:58.473Z,1528891558.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:05:58.474Z,1528891558.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:58.845Z,1528891558.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:58.871Z,1528891558.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:05:58.872Z,1528891558.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:59.269Z,1528891559.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:59.287Z,1528891559.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T12:05:59.288Z,1528891559.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:05:59.668Z,1528891559.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:05:59.685Z,1528891559.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:05:59.686Z,1528891559.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:00.062Z,1528891560.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:00.080Z,1528891560.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:06:00.080Z,1528891560.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:00.446Z,1528891560.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:00.475Z,1528891560.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:06:00.476Z,1528891560.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:00.839Z,1528891560.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:00.880Z,1528891560.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:06:00.881Z,1528891560.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:01.243Z,1528891561.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:01.280Z,1528891561.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T12:06:01.281Z,1528891561.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:01.643Z,1528891561.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:01.676Z,1528891561.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T12:06:01.677Z,1528891561.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:02.062Z,1528891562.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:02.084Z,1528891562.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T12:06:02.084Z,1528891562.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:02.460Z,1528891562.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:02.496Z,1528891562.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:06:02.496Z,1528891562.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:02.868Z,1528891562.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:02.918Z,1528891562.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T12:06:02.919Z,1528891562.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:03.239Z,1528891563.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:03.280Z,1528891563.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T12:06:03.280Z,1528891563.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:03.645Z,1528891563.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:03.673Z,1528891563.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:06:03.674Z,1528891563.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:04.043Z,1528891564.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:04.082Z,1528891564.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:06:04.083Z,1528891564.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:04.440Z,1528891564.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:04.473Z,1528891564.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:06:04.474Z,1528891564.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:04.843Z,1528891564.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:04.883Z,1528891564.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:06:04.884Z,1528891564.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:05.256Z,1528891565.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:05.280Z,1528891565.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:06:05.282Z,1528891565.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:08.374Z,1528891568.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:08.392Z,1528891568.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-06-13T12:06:08.393Z,1528891568.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:08.509Z,1528891568.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:08.553Z,1528891568.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T12:06:08.554Z,1528891568.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:08.907Z,1528891568.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:08.941Z,1528891568.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T12:06:08.942Z,1528891568.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:09.308Z,1528891569.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:09.326Z,1528891569.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T12:06:09.327Z,1528891569.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:09.702Z,1528891569.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:09.719Z,1528891569.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T12:06:09.720Z,1528891569.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:10.115Z,1528891570.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:10.132Z,1528891570.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T12:06:10.149Z,1528891570.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:10.522Z,1528891570.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:10.555Z,1528891570.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T12:06:10.556Z,1528891570.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:10.910Z,1528891570.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:10.936Z,1528891570.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T12:06:10.937Z,1528891570.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:11.309Z,1528891571.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:11.332Z,1528891571.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T12:06:11.333Z,1528891571.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:11.705Z,1528891571.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:11.722Z,1528891571.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T12:06:11.723Z,1528891571.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:12.108Z,1528891572.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:12.127Z,1528891572.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T12:06:12.128Z,1528891572.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:12.510Z,1528891572.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:12.528Z,1528891572.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T12:06:12.529Z,1528891572.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:12.906Z,1528891572.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:12.923Z,1528891572.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T12:06:12.924Z,1528891572.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:13.310Z,1528891573.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:13.336Z,1528891573.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T12:06:13.337Z,1528891573.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:13.715Z,1528891573.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:13.740Z,1528891573.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T12:06:13.741Z,1528891573.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:14.115Z,1528891574.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:14.132Z,1528891574.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T12:06:14.133Z,1528891574.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:14.508Z,1528891574.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:14.532Z,1528891574.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T12:06:14.533Z,1528891574.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:14.906Z,1528891574.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:14.930Z,1528891574.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:15.302Z,1528891575.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:15.327Z,1528891575.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:15.708Z,1528891575.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:15.726Z,1528891575.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:16.118Z,1528891576.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:16.136Z,1528891576.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:16.514Z,1528891576.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:16.536Z,1528891576.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:16.918Z,1528891576.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:16.936Z,1528891576.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:17.309Z,1528891577.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:17.339Z,1528891577.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:17.702Z,1528891577.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:17.742Z,1528891577.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:18.103Z,1528891578.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:18.127Z,1528891578.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:18.508Z,1528891578.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:18.539Z,1528891578.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:18.903Z,1528891578.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:18.931Z,1528891578.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:19.319Z,1528891579.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:19.338Z,1528891579.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:19.720Z,1528891579.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:19.739Z,1528891579.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:20.115Z,1528891580.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:20.144Z,1528891580.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:20.501Z,1528891580.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:20.540Z,1528891580.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:20.903Z,1528891580.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:20.941Z,1528891580.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:21.304Z,1528891581.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:21.335Z,1528891581.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:21.700Z,1528891581.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:21.740Z,1528891581.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:22.120Z,1528891582.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:22.139Z,1528891582.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:22.520Z,1528891582.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:22.544Z,1528891582.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:22.919Z,1528891582.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:22.937Z,1528891582.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:23.300Z,1528891583.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:23.338Z,1528891583.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:23.701Z,1528891583.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:23.739Z,1528891583.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:24.102Z,1528891584.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:24.120Z,1528891584.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:24.507Z,1528891584.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:24.552Z,1528891584.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:24.899Z,1528891584.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:24.951Z,1528891584.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:25.313Z,1528891585.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:25.347Z,1528891585.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:25.717Z,1528891585.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:25.752Z,1528891585.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:26.117Z,1528891586.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:26.151Z,1528891586.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:26.504Z,1528891586.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:26.542Z,1528891586.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:26.905Z,1528891586.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:26.923Z,1528891586.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:27.308Z,1528891587.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:27.326Z,1528891587.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:27.704Z,1528891587.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:27.722Z,1528891587.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:28.116Z,1528891588.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:28.152Z,1528891588.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:28.520Z,1528891588.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:28.554Z,1528891588.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:28.913Z,1528891588.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:28.931Z,1528891588.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:29.309Z,1528891589.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:29.327Z,1528891589.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:29.705Z,1528891589.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:29.751Z,1528891589.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:30.103Z,1528891590.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:30.146Z,1528891590.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:30.506Z,1528891590.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:30.540Z,1528891590.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:30.910Z,1528891590.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:30.928Z,1528891590.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:31.315Z,1528891591.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:31.336Z,1528891591.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:31.715Z,1528891591.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:31.760Z,1528891591.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:32.115Z,1528891592.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:32.133Z,1528891592.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:32.508Z,1528891592.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:32.526Z,1528891592.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:32.906Z,1528891592.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:32.958Z,1528891592.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:33.308Z,1528891593.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:33.356Z,1528891593.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:33.707Z,1528891593.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:33.728Z,1528891593.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:34.114Z,1528891594.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:34.132Z,1528891594.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:34.510Z,1528891594.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:34.556Z,1528891594.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:34.912Z,1528891594.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:34.956Z,1528891594.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:35.308Z,1528891595.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:35.327Z,1528891595.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:35.709Z,1528891595.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:35.727Z,1528891595.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:36.108Z,1528891596.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:36.159Z,1528891596.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:36.507Z,1528891596.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:36.530Z,1528891596.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:36.899Z,1528891596.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:36.927Z,1528891596.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:37.314Z,1528891597.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:37.332Z,1528891597.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:37.713Z,1528891597.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:37.756Z,1528891597.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:38.111Z,1528891598.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:38.164Z,1528891598.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:38.504Z,1528891598.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:38.530Z,1528891598.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:38.907Z,1528891598.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:38.937Z,1528891598.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:39.299Z,1528891599.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:39.340Z,1528891599.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:39.705Z,1528891599.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:39.728Z,1528891599.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:40.118Z,1528891600.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:40.140Z,1528891600.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:40.518Z,1528891600.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:40.540Z,1528891600.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:40.914Z,1528891600.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:40.962Z,1528891600.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:41.306Z,1528891601.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:41.329Z,1528891601.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:41.699Z,1528891601.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:41.727Z,1528891601.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:42.108Z,1528891602.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:42.128Z,1528891602.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:42.506Z,1528891602.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:42.543Z,1528891602.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:42.906Z,1528891602.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:42.932Z,1528891602.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:43.317Z,1528891603.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:43.340Z,1528891603.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:43.717Z,1528891603.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:43.740Z,1528891603.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:44.111Z,1528891604.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:44.162Z,1528891604.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:44.505Z,1528891604.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:44.524Z,1528891604.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:44.903Z,1528891604.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:44.935Z,1528891604.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:45.308Z,1528891605.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:45.328Z,1528891605.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:45.705Z,1528891605.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:45.761Z,1528891605.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:46.119Z,1528891606.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:46.142Z,1528891606.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:46.516Z,1528891606.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:46.538Z,1528891606.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:46.918Z,1528891606.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:46.944Z,1528891606.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:47.306Z,1528891607.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:47.361Z,1528891607.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:47.695Z,1528891607.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:47.723Z,1528891607.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:48.115Z,1528891608.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:48.138Z,1528891608.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:48.520Z,1528891608.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:48.538Z,1528891608.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:48.911Z,1528891608.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:48.968Z,1528891608.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:49.306Z,1528891609.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:49.324Z,1528891609.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:49.706Z,1528891609.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:49.730Z,1528891609.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:50.118Z,1528891610.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:50.144Z,1528891610.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:50.519Z,1528891610.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:50.564Z,1528891610.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:50.919Z,1528891610.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:50.946Z,1528891610.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:51.306Z,1528891611.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:51.327Z,1528891611.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:51.705Z,1528891611.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:51.729Z,1528891611.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:52.120Z,1528891612.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:52.138Z,1528891612.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:52.519Z,1528891612.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:52.547Z,1528891612.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:52.915Z,1528891612.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:52.938Z,1528891612.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:53.307Z,1528891613.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:53.330Z,1528891613.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:53.695Z,1528891613.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:53.739Z,1528891613.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:54.118Z,1528891614.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:54.137Z,1528891614.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:54.518Z,1528891614.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:54.548Z,1528891614.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:54.915Z,1528891614.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:54.937Z,1528891614.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:55.300Z,1528891615.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:55.334Z,1528891615.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:55.700Z,1528891615.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:55.747Z,1528891615.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:56.114Z,1528891616.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:56.143Z,1528891616.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:56.523Z,1528891616.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:56.543Z,1528891616.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:56.921Z,1528891616.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:56.977Z,1528891616.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:57.304Z,1528891617.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:57.332Z,1528891617.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:57.699Z,1528891617.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:57.734Z,1528891617.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:58.120Z,1528891618.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:58.143Z,1528891618.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:58.516Z,1528891618.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:58.552Z,1528891618.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:58.915Z,1528891618.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:58.934Z,1528891618.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:59.301Z,1528891619.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:59.342Z,1528891619.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:06:59.699Z,1528891619.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:06:59.747Z,1528891619.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:00.109Z,1528891620.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:00.137Z,1528891620.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:00.513Z,1528891620.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:00.542Z,1528891620.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:00.905Z,1528891620.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:00.943Z,1528891620.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:01.303Z,1528891621.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:01.340Z,1528891621.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:01.703Z,1528891621.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:01.741Z,1528891621.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:04.814Z,1528891624.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:04.852Z,1528891624.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:05.001Z,1528891625.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:05.024Z,1528891625.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:05.398Z,1528891625.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:05.416Z,1528891625.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:05.779Z,1528891625.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:05.807Z,1528891625.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:06.171Z,1528891626.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:06.204Z,1528891626.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:06.574Z,1528891626.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:06.605Z,1528891626.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:06.973Z,1528891626.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:07.001Z,1528891627.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:07.396Z,1528891627.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:07.415Z,1528891627.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:07.796Z,1528891627.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:07.814Z,1528891627.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:08.180Z,1528891628.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:08.211Z,1528891628.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:08.573Z,1528891628.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:08.601Z,1528891628.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:08.976Z,1528891628.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:09.006Z,1528891629.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:09.376Z,1528891629.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:09.405Z,1528891629.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:09.772Z,1528891629.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:09.803Z,1528891629.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:10.193Z,1528891630.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:10.216Z,1528891630.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:10.587Z,1528891630.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:10.606Z,1528891630.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:10.991Z,1528891630.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:11.010Z,1528891631.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:11.371Z,1528891631.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:11.410Z,1528891631.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:11.773Z,1528891631.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:11.808Z,1528891631.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:12.175Z,1528891632.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:12.209Z,1528891632.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:12.576Z,1528891632.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:12.609Z,1528891632.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:12.967Z,1528891632.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:13.012Z,1528891633.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:13.383Z,1528891633.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:13.424Z,1528891633.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.412606 seconds old.
2018-06-13T12:07:13.429Z,1528891633.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:13.430Z,1528891633.430 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.417256 seconds old.
2018-06-13T12:07:13.431Z,1528891633.431 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.417423 seconds old.
2018-06-13T12:07:13.782Z,1528891633.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:13.815Z,1528891633.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.804257 seconds old.
2018-06-13T12:07:13.816Z,1528891633.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:13.821Z,1528891633.821 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.808781 seconds old.
2018-06-13T12:07:13.822Z,1528891633.822 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.808970 seconds old.
2018-06-13T12:07:14.190Z,1528891634.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:14.218Z,1528891634.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.206538 seconds old.
2018-06-13T12:07:14.219Z,1528891634.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:14.219Z,1528891634.219 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.206892 seconds old.
2018-06-13T12:07:14.220Z,1528891634.220 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.207012 seconds old.
2018-06-13T12:07:14.571Z,1528891634.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:14.592Z,1528891634.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.580986 seconds old.
2018-06-13T12:07:14.605Z,1528891634.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:14.606Z,1528891634.606 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.593684 seconds old.
2018-06-13T12:07:14.607Z,1528891634.607 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.593849 seconds old.
2018-06-13T12:07:14.978Z,1528891634.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:14.995Z,1528891634.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.983932 seconds old.
2018-06-13T12:07:14.996Z,1528891634.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:15.013Z,1528891635.013 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.000596 seconds old.
2018-06-13T12:07:15.014Z,1528891635.014 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.000811 seconds old.
2018-06-13T12:07:15.378Z,1528891635.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:15.394Z,1528891635.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.383154 seconds old.
2018-06-13T12:07:15.395Z,1528891635.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:15.396Z,1528891635.396 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.383486 seconds old.
2018-06-13T12:07:15.398Z,1528891635.398 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.384331 seconds old.
2018-06-13T12:07:15.778Z,1528891635.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:15.794Z,1528891635.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.783304 seconds old.
2018-06-13T12:07:15.795Z,1528891635.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:15.796Z,1528891635.796 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.783654 seconds old.
2018-06-13T12:07:15.798Z,1528891635.798 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.784498 seconds old.
2018-06-13T12:07:16.190Z,1528891636.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:16.224Z,1528891636.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.212522 seconds old.
2018-06-13T12:07:16.225Z,1528891636.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:16.226Z,1528891636.226 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.213277 seconds old.
2018-06-13T12:07:16.227Z,1528891636.227 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.213423 seconds old.
2018-06-13T12:07:16.591Z,1528891636.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:16.628Z,1528891636.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.617181 seconds old.
2018-06-13T12:07:16.629Z,1528891636.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:16.630Z,1528891636.630 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.617779 seconds old.
2018-06-13T12:07:16.631Z,1528891636.631 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.617908 seconds old.
2018-06-13T12:07:16.986Z,1528891636.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:17.003Z,1528891637.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.992225 seconds old.
2018-06-13T12:07:17.004Z,1528891637.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:17.005Z,1528891637.005 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.992771 seconds old.
2018-06-13T12:07:17.006Z,1528891637.006 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.992919 seconds old.
2018-06-13T12:07:17.382Z,1528891637.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:17.399Z,1528891637.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.388316 seconds old.
2018-06-13T12:07:17.400Z,1528891637.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:17.401Z,1528891637.401 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.388882 seconds old.
2018-06-13T12:07:17.402Z,1528891637.402 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.389037 seconds old.
2018-06-13T12:07:17.771Z,1528891637.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:17.799Z,1528891637.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.787860 seconds old.
2018-06-13T12:07:17.800Z,1528891637.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:17.801Z,1528891637.801 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.788214 seconds old.
2018-06-13T12:07:17.802Z,1528891637.802 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.788572 seconds old.
2018-06-13T12:07:18.170Z,1528891638.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:18.206Z,1528891638.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.195378 seconds old.
2018-06-13T12:07:18.207Z,1528891638.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:18.208Z,1528891638.208 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.195727 seconds old.
2018-06-13T12:07:18.214Z,1528891638.214 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.200067 seconds old.
2018-06-13T12:07:18.574Z,1528891638.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:18.610Z,1528891638.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.599185 seconds old.
2018-06-13T12:07:18.611Z,1528891638.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:18.612Z,1528891638.612 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.599523 seconds old.
2018-06-13T12:07:18.621Z,1528891638.621 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.607805 seconds old.
2018-06-13T12:07:18.976Z,1528891638.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:19.007Z,1528891639.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.995987 seconds old.
2018-06-13T12:07:19.008Z,1528891639.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:19.009Z,1528891639.009 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.996530 seconds old.
2018-06-13T12:07:19.010Z,1528891639.010 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.996687 seconds old.
2018-06-13T12:07:19.387Z,1528891639.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:19.408Z,1528891639.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.396667 seconds old.
2018-06-13T12:07:19.409Z,1528891639.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:19.410Z,1528891639.410 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.397263 seconds old.
2018-06-13T12:07:19.411Z,1528891639.411 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.397391 seconds old.
2018-06-13T12:07:19.790Z,1528891639.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:19.807Z,1528891639.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.795866 seconds old.
2018-06-13T12:07:19.808Z,1528891639.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:19.809Z,1528891639.809 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.796206 seconds old.
2018-06-13T12:07:19.810Z,1528891639.810 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.796565 seconds old.
2018-06-13T12:07:20.187Z,1528891640.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:20.204Z,1528891640.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.193431 seconds old.
2018-06-13T12:07:20.206Z,1528891640.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:20.207Z,1528891640.207 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.193998 seconds old.
2018-06-13T12:07:20.208Z,1528891640.208 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.194124 seconds old.
2018-06-13T12:07:20.579Z,1528891640.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:20.596Z,1528891640.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.584888 seconds old.
2018-06-13T12:07:20.599Z,1528891640.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:20.599Z,1528891640.599 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.586820 seconds old.
2018-06-13T12:07:20.600Z,1528891640.600 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.586955 seconds old.
2018-06-13T12:07:20.967Z,1528891640.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:21.006Z,1528891641.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.994784 seconds old.
2018-06-13T12:07:21.007Z,1528891641.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:21.008Z,1528891641.008 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.995125 seconds old.
2018-06-13T12:07:21.009Z,1528891641.009 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.995246 seconds old.
2018-06-13T12:07:21.368Z,1528891641.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:21.406Z,1528891641.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:21.781Z,1528891641.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:21.800Z,1528891641.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:22.191Z,1528891642.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:22.209Z,1528891642.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:22.587Z,1528891642.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:22.639Z,1528891642.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:22.990Z,1528891642.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:23.039Z,1528891643.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:23.367Z,1528891643.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:23.400Z,1528891643.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:23.777Z,1528891643.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:23.795Z,1528891643.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:24.177Z,1528891644.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:24.235Z,1528891644.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:24.578Z,1528891644.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:24.601Z,1528891644.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:24.967Z,1528891644.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:25.007Z,1528891645.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:25.387Z,1528891645.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:25.411Z,1528891645.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:25.789Z,1528891645.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:25.821Z,1528891645.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:26.183Z,1528891646.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:26.224Z,1528891646.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:26.571Z,1528891646.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:26.620Z,1528891646.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:26.973Z,1528891646.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:27.005Z,1528891647.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:27.368Z,1528891647.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:27.410Z,1528891647.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:27.771Z,1528891647.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:27.812Z,1528891647.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:28.187Z,1528891648.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:28.217Z,1528891648.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:28.594Z,1528891648.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:28.620Z,1528891648.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:28.987Z,1528891648.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:29.024Z,1528891649.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:29.371Z,1528891649.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:29.410Z,1528891649.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:29.767Z,1528891649.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:29.805Z,1528891649.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:30.171Z,1528891650.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:30.212Z,1528891650.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:30.568Z,1528891650.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:30.608Z,1528891650.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:30.971Z,1528891650.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:31.006Z,1528891651.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:31.382Z,1528891651.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:31.414Z,1528891651.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:31.786Z,1528891651.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:31.820Z,1528891651.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:32.178Z,1528891652.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:32.212Z,1528891652.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:32.571Z,1528891652.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:32.606Z,1528891652.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:32.971Z,1528891652.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:32.992Z,1528891652.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:33.375Z,1528891653.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:33.413Z,1528891653.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:33.774Z,1528891653.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:33.791Z,1528891653.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:34.185Z,1528891654.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:34.228Z,1528891654.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:34.585Z,1528891654.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:34.622Z,1528891654.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:34.988Z,1528891654.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:35.019Z,1528891655.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:35.375Z,1528891655.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:35.402Z,1528891655.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:35.775Z,1528891655.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:35.792Z,1528891655.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:36.181Z,1528891656.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:36.217Z,1528891656.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:36.586Z,1528891656.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:36.606Z,1528891656.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:36.982Z,1528891656.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:37.029Z,1528891657.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:37.378Z,1528891657.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:37.395Z,1528891657.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:37.774Z,1528891657.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:37.791Z,1528891657.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:38.182Z,1528891658.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:38.205Z,1528891658.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:38.585Z,1528891658.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:38.603Z,1528891658.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:38.985Z,1528891658.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:39.004Z,1528891659.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:39.378Z,1528891659.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:39.399Z,1528891659.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:39.780Z,1528891659.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:39.803Z,1528891659.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:40.183Z,1528891660.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:40.202Z,1528891660.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:40.586Z,1528891660.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:40.605Z,1528891660.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:40.986Z,1528891660.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:41.010Z,1528891661.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:41.375Z,1528891661.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:41.424Z,1528891661.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:41.778Z,1528891661.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:41.795Z,1528891661.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:42.188Z,1528891662.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:42.207Z,1528891662.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:42.591Z,1528891662.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:42.614Z,1528891662.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:42.992Z,1528891662.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:43.015Z,1528891663.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:43.375Z,1528891663.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:43.415Z,1528891663.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:43.778Z,1528891663.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:43.796Z,1528891663.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:44.188Z,1528891664.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:44.212Z,1528891664.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:44.590Z,1528891664.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:44.613Z,1528891664.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:44.991Z,1528891664.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:45.009Z,1528891665.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:45.377Z,1528891665.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:45.395Z,1528891665.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:45.767Z,1528891665.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:45.803Z,1528891665.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:46.192Z,1528891666.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:46.216Z,1528891666.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:46.591Z,1528891666.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:46.609Z,1528891666.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:46.988Z,1528891666.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:47.006Z,1528891667.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:47.372Z,1528891667.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:47.404Z,1528891667.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:47.771Z,1528891667.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:47.812Z,1528891667.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:48.187Z,1528891668.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:48.206Z,1528891668.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:48.592Z,1528891668.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:48.616Z,1528891668.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:48.993Z,1528891668.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:49.021Z,1528891669.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:49.372Z,1528891669.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:49.413Z,1528891669.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:49.771Z,1528891669.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:49.801Z,1528891669.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:50.191Z,1528891670.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:50.210Z,1528891670.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:50.591Z,1528891670.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:50.610Z,1528891670.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:50.992Z,1528891670.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:51.016Z,1528891671.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:51.372Z,1528891671.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:51.404Z,1528891671.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:51.771Z,1528891671.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:51.800Z,1528891671.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:52.192Z,1528891672.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:52.217Z,1528891672.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:52.591Z,1528891672.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:52.620Z,1528891672.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:52.987Z,1528891672.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:53.006Z,1528891673.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:53.372Z,1528891673.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:53.404Z,1528891673.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:53.772Z,1528891673.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:53.805Z,1528891673.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:54.187Z,1528891674.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:54.206Z,1528891674.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:54.593Z,1528891674.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:54.616Z,1528891674.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:54.988Z,1528891674.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:55.006Z,1528891675.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:55.371Z,1528891675.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:55.399Z,1528891675.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:55.775Z,1528891675.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:55.813Z,1528891675.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:56.192Z,1528891676.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:56.216Z,1528891676.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:56.592Z,1528891676.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:56.616Z,1528891676.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:56.993Z,1528891676.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:57.016Z,1528891677.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:57.372Z,1528891677.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:57.401Z,1528891677.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:57.771Z,1528891677.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:57.799Z,1528891677.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:58.194Z,1528891678.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:58.213Z,1528891678.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:58.593Z,1528891678.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:58.616Z,1528891678.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:58.988Z,1528891678.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:59.006Z,1528891679.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:59.372Z,1528891679.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:59.412Z,1528891679.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:07:59.771Z,1528891679.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:07:59.799Z,1528891679.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:00.184Z,1528891680.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:00.203Z,1528891680.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:00.592Z,1528891680.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:00.612Z,1528891680.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:00.983Z,1528891680.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:01.002Z,1528891681.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:01.375Z,1528891681.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:01.404Z,1528891681.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:01.775Z,1528891681.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:01.814Z,1528891681.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:04.894Z,1528891684.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:04.912Z,1528891684.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:05.056Z,1528891685.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:05.075Z,1528891685.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:05.451Z,1528891685.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:05.478Z,1528891685.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:05.823Z,1528891685.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:05.852Z,1528891685.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:06.227Z,1528891686.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:06.263Z,1528891686.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:06.628Z,1528891686.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:06.677Z,1528891686.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:07.027Z,1528891687.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:07.059Z,1528891687.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:07.444Z,1528891687.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:07.483Z,1528891687.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:07.842Z,1528891687.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:07.882Z,1528891687.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:08.246Z,1528891688.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:08.274Z,1528891688.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:08.627Z,1528891688.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:08.660Z,1528891688.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:09.027Z,1528891689.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:09.073Z,1528891689.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:09.429Z,1528891689.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:09.466Z,1528891689.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:09.827Z,1528891689.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:09.871Z,1528891689.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:10.244Z,1528891690.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:10.272Z,1528891690.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:10.642Z,1528891690.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:10.691Z,1528891690.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:11.038Z,1528891691.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:11.070Z,1528891691.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:11.428Z,1528891691.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:11.474Z,1528891691.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:11.827Z,1528891691.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:11.868Z,1528891691.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:12.238Z,1528891692.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:12.265Z,1528891692.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:12.642Z,1528891692.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:12.675Z,1528891692.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:13.034Z,1528891693.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:13.079Z,1528891693.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:13.423Z,1528891693.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:13.474Z,1528891693.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:13.827Z,1528891693.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:13.845Z,1528891693.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:14.238Z,1528891694.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:14.272Z,1528891694.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:14.645Z,1528891694.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:14.678Z,1528891694.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:15.043Z,1528891695.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:15.079Z,1528891695.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:15.431Z,1528891695.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:15.478Z,1528891695.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:15.830Z,1528891695.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:15.848Z,1528891695.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:16.238Z,1528891696.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:16.275Z,1528891696.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:16.642Z,1528891696.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:16.680Z,1528891696.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:17.038Z,1528891697.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:17.084Z,1528891697.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:17.435Z,1528891697.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:17.452Z,1528891697.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:17.829Z,1528891697.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:17.847Z,1528891697.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:18.240Z,1528891698.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:18.262Z,1528891698.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:18.642Z,1528891698.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:18.659Z,1528891698.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:19.039Z,1528891699.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:19.064Z,1528891699.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:19.434Z,1528891699.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:19.452Z,1528891699.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:19.834Z,1528891699.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:19.857Z,1528891699.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:20.243Z,1528891700.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:20.261Z,1528891700.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:20.646Z,1528891700.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:20.668Z,1528891700.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:21.048Z,1528891701.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:21.071Z,1528891701.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:21.434Z,1528891701.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:21.462Z,1528891701.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:21.834Z,1528891701.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:21.856Z,1528891701.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:22.248Z,1528891702.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:22.266Z,1528891702.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:22.644Z,1528891702.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:22.662Z,1528891702.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:23.045Z,1528891703.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:23.068Z,1528891703.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:23.424Z,1528891703.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:23.455Z,1528891703.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:23.835Z,1528891703.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:23.853Z,1528891703.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:24.246Z,1528891704.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:24.264Z,1528891704.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:24.647Z,1528891704.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:24.671Z,1528891704.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:25.041Z,1528891705.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:25.059Z,1528891705.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:25.435Z,1528891705.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:25.453Z,1528891705.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:25.834Z,1528891705.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:25.859Z,1528891705.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:26.244Z,1528891706.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:26.267Z,1528891706.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:26.647Z,1528891706.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:26.664Z,1528891706.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:27.048Z,1528891707.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:27.066Z,1528891707.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:27.424Z,1528891707.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:27.456Z,1528891707.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:27.823Z,1528891707.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:27.871Z,1528891707.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:28.247Z,1528891708.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:28.266Z,1528891708.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:28.647Z,1528891708.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:28.665Z,1528891708.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:29.043Z,1528891709.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:29.062Z,1528891709.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:29.434Z,1528891709.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:29.470Z,1528891709.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:29.823Z,1528891709.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:29.851Z,1528891709.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:30.244Z,1528891710.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:30.262Z,1528891710.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:30.649Z,1528891710.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:30.667Z,1528891710.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:31.048Z,1528891711.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:31.077Z,1528891711.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:31.428Z,1528891711.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:31.455Z,1528891711.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:31.827Z,1528891711.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:31.856Z,1528891711.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:32.244Z,1528891712.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:32.262Z,1528891712.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:32.648Z,1528891712.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:32.677Z,1528891712.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:33.048Z,1528891713.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:33.066Z,1528891713.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:33.428Z,1528891713.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:33.455Z,1528891713.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:33.827Z,1528891713.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:33.854Z,1528891713.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:34.249Z,1528891714.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:34.267Z,1528891714.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:34.644Z,1528891714.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:34.668Z,1528891714.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:35.044Z,1528891715.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:35.062Z,1528891715.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:35.428Z,1528891715.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:35.458Z,1528891715.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:35.827Z,1528891715.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:35.865Z,1528891715.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:36.270Z,1528891716.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:36.317Z,1528891716.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:36.641Z,1528891716.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:36.672Z,1528891716.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:37.037Z,1528891717.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:37.071Z,1528891717.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:37.428Z,1528891717.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:37.462Z,1528891717.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:37.827Z,1528891717.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:37.845Z,1528891717.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:38.242Z,1528891718.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:38.278Z,1528891718.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:38.645Z,1528891718.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:38.671Z,1528891718.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:39.042Z,1528891719.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:39.072Z,1528891719.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:39.433Z,1528891719.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:39.451Z,1528891719.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:39.827Z,1528891719.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:39.844Z,1528891719.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:40.245Z,1528891720.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:40.280Z,1528891720.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:40.641Z,1528891720.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:40.675Z,1528891720.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:41.042Z,1528891721.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:41.059Z,1528891721.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:41.435Z,1528891721.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:41.454Z,1528891721.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:41.830Z,1528891721.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:41.848Z,1528891721.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:42.300Z,1528891722.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:42.331Z,1528891722.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:42.642Z,1528891722.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:42.684Z,1528891722.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:43.038Z,1528891723.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:43.057Z,1528891723.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:43.433Z,1528891723.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:43.453Z,1528891723.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:43.834Z,1528891723.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:43.857Z,1528891723.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:44.239Z,1528891724.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:44.261Z,1528891724.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:44.641Z,1528891724.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:44.660Z,1528891724.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:45.042Z,1528891725.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:45.059Z,1528891725.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:45.433Z,1528891725.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:45.456Z,1528891725.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:45.834Z,1528891725.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:45.852Z,1528891725.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:46.234Z,1528891726.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:46.260Z,1528891726.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:46.643Z,1528891726.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:46.660Z,1528891726.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:47.046Z,1528891727.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:47.064Z,1528891727.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:47.442Z,1528891727.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:47.464Z,1528891727.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:47.827Z,1528891727.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:47.854Z,1528891727.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:48.227Z,1528891728.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:48.264Z,1528891728.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:48.627Z,1528891728.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:48.656Z,1528891728.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:49.028Z,1528891729.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:49.056Z,1528891729.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:49.444Z,1528891729.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:49.462Z,1528891729.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:49.843Z,1528891729.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:49.866Z,1528891729.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:50.244Z,1528891730.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:50.262Z,1528891730.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:50.627Z,1528891730.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:50.663Z,1528891730.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:51.027Z,1528891731.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:51.066Z,1528891731.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:51.423Z,1528891731.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:51.464Z,1528891731.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:51.827Z,1528891731.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:51.860Z,1528891731.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:52.227Z,1528891732.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:52.261Z,1528891732.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:52.644Z,1528891732.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:52.662Z,1528891732.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:53.044Z,1528891733.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:53.068Z,1528891733.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:53.449Z,1528891733.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:53.467Z,1528891733.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:53.824Z,1528891733.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:53.858Z,1528891733.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:54.225Z,1528891734.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:54.254Z,1528891734.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:54.628Z,1528891734.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:54.661Z,1528891734.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:55.027Z,1528891735.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:55.044Z,1528891735.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:55.437Z,1528891735.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:55.470Z,1528891735.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:55.841Z,1528891735.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:55.869Z,1528891735.869 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:55.870Z,1528891735.870 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 174
2018-06-13T12:08:55.870Z,1528891735.870 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:08:55.871Z,1528891735.871 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:55.871Z,1528891735.871 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 174
2018-06-13T12:08:55.872Z,1528891735.872 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:08:55.873Z,1528891735.873 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:55.873Z,1528891735.873 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 174
2018-06-13T12:08:55.874Z,1528891735.874 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:08:55.953Z,1528891735.953 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:08:55.953Z,1528891735.953 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:08:55.954Z,1528891735.954 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:08:56.234Z,1528891736.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:56.333Z,1528891736.333 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:08:56.333Z,1528891736.333 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 174
2018-06-13T12:08:56.334Z,1528891736.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:08:56.334Z,1528891736.334 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 174
2018-06-13T12:08:56.334Z,1528891736.334 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:08:56.334Z,1528891736.334 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 174
2018-06-13T12:08:56.629Z,1528891736.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:56.645Z,1528891736.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:08:56.646Z,1528891736.646 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:08:56.646Z,1528891736.646 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:08:56.646Z,1528891736.646 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:08:56.647Z,1528891736.647 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:08:56.647Z,1528891736.647 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:08:56.647Z,1528891736.647 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:08:56.648Z,1528891736.648 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:08:56.648Z,1528891736.648 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:08:57.034Z,1528891737.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:57.052Z,1528891737.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:08:57.053Z,1528891737.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:57.433Z,1528891737.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:57.451Z,1528891737.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:08:57.452Z,1528891737.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:57.834Z,1528891737.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:57.852Z,1528891737.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:08:57.854Z,1528891737.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:58.234Z,1528891738.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:58.252Z,1528891738.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:08:58.253Z,1528891738.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:58.639Z,1528891738.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:58.660Z,1528891738.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:08:58.661Z,1528891738.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:59.041Z,1528891739.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:59.059Z,1528891739.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:08:59.060Z,1528891739.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:59.441Z,1528891739.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:59.459Z,1528891739.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:08:59.460Z,1528891739.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:08:59.833Z,1528891739.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:08:59.857Z,1528891739.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:08:59.858Z,1528891739.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:00.233Z,1528891740.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:00.334Z,1528891740.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T12:09:00.335Z,1528891740.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:00.637Z,1528891740.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:00.654Z,1528891740.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:09:00.655Z,1528891740.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:01.030Z,1528891741.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:01.047Z,1528891741.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:09:01.048Z,1528891741.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:01.439Z,1528891741.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:01.456Z,1528891741.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:09:01.458Z,1528891741.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:01.460Z,1528891741.460 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T12:09:01.461Z,1528891741.461 [Default:CheckIn:C.Wait] Stopped
2018-06-13T12:09:01.461Z,1528891741.461 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T12:09:01.461Z,1528891741.461 [Default:CheckIn:D] Running Loop=1
2018-06-13T12:09:01.841Z,1528891741.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:01.859Z,1528891741.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:09:01.860Z,1528891741.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:01.863Z,1528891741.863 [Default:CheckIn:D] Stopped
2018-06-13T12:09:01.863Z,1528891741.863 [Default:CheckIn:E] Running Loop=1
2018-06-13T12:09:04.942Z,1528891744.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:04.959Z,1528891744.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T12:09:04.960Z,1528891744.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:04.964Z,1528891744.964 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 521.806966 min 
2018-06-13T12:09:04.964Z,1528891744.964 [Default:CheckIn:E] Stopped
2018-06-13T12:09:04.964Z,1528891744.964 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T12:09:04.964Z,1528891744.964 [Default:CheckIn] Stopped
2018-06-13T12:09:04.964Z,1528891744.964 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T12:09:04.964Z,1528891744.964 [Default:CheckIn](INFO): Running loop #51
2018-06-13T12:09:04.965Z,1528891744.965 [Default:CheckIn] Running Loop=51
2018-06-13T12:09:04.965Z,1528891744.965 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T12:09:04.965Z,1528891744.965 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T12:09:05.098Z,1528891745.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:05.143Z,1528891745.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T12:09:05.144Z,1528891745.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:05.494Z,1528891745.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:05.512Z,1528891745.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:09:05.513Z,1528891745.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:05.891Z,1528891745.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:05.916Z,1528891745.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:09:05.918Z,1528891745.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:06.298Z,1528891746.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:06.320Z,1528891746.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T12:09:06.322Z,1528891746.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:06.701Z,1528891746.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:06.719Z,1528891746.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:09:06.720Z,1528891746.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:07.097Z,1528891747.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:07.115Z,1528891747.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:09:07.116Z,1528891747.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:07.491Z,1528891747.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:07.514Z,1528891747.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:09:07.515Z,1528891747.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:07.891Z,1528891747.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:07.915Z,1528891747.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:09:07.916Z,1528891747.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:08.303Z,1528891748.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:08.320Z,1528891748.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T12:09:08.321Z,1528891748.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:08.706Z,1528891748.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:08.727Z,1528891748.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T12:09:08.727Z,1528891748.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:09.108Z,1528891749.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:09.125Z,1528891749.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T12:09:09.126Z,1528891749.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:09.499Z,1528891749.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:09.516Z,1528891749.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:09:09.517Z,1528891749.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:09.891Z,1528891749.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:09.916Z,1528891749.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:09:09.922Z,1528891749.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:10.308Z,1528891750.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:10.332Z,1528891750.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T12:09:10.333Z,1528891750.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:10.708Z,1528891750.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:10.726Z,1528891750.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T12:09:10.726Z,1528891750.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:11.102Z,1528891751.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:11.138Z,1528891751.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T12:09:11.139Z,1528891751.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:11.500Z,1528891751.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:11.517Z,1528891751.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:09:11.518Z,1528891751.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:11.887Z,1528891751.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:11.927Z,1528891751.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T12:09:11.928Z,1528891751.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:12.304Z,1528891752.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:12.322Z,1528891752.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T12:09:12.323Z,1528891752.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:12.708Z,1528891752.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:12.728Z,1528891752.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T12:09:12.730Z,1528891752.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:13.104Z,1528891753.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:13.121Z,1528891753.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T12:09:13.122Z,1528891753.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:13.484Z,1528891753.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:13.524Z,1528891753.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T12:09:13.525Z,1528891753.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:13.887Z,1528891753.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:13.924Z,1528891753.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T12:09:13.929Z,1528891753.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:14.298Z,1528891754.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:14.326Z,1528891754.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T12:09:14.326Z,1528891754.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:14.700Z,1528891754.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:14.732Z,1528891754.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T12:09:14.733Z,1528891754.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:15.101Z,1528891755.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:15.140Z,1528891755.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T12:09:15.145Z,1528891755.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:15.488Z,1528891755.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:15.506Z,1528891755.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:09:15.507Z,1528891755.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:15.890Z,1528891755.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:15.907Z,1528891755.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:16.301Z,1528891756.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:16.343Z,1528891756.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:16.701Z,1528891756.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:16.735Z,1528891756.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:17.101Z,1528891757.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:17.119Z,1528891757.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:17.493Z,1528891757.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:17.517Z,1528891757.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:17.887Z,1528891757.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:17.909Z,1528891757.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:18.301Z,1528891758.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:18.319Z,1528891758.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:18.701Z,1528891758.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:18.719Z,1528891758.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:19.098Z,1528891759.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:19.120Z,1528891759.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:19.491Z,1528891759.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:19.514Z,1528891759.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:19.891Z,1528891759.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:19.916Z,1528891759.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:20.301Z,1528891760.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:20.319Z,1528891760.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:20.705Z,1528891760.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:20.723Z,1528891760.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:21.104Z,1528891761.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:21.122Z,1528891761.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:21.494Z,1528891761.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:21.511Z,1528891761.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:21.893Z,1528891761.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:21.911Z,1528891761.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:22.308Z,1528891762.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:22.327Z,1528891762.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:22.703Z,1528891762.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:22.721Z,1528891762.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:23.108Z,1528891763.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:23.132Z,1528891763.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:23.495Z,1528891763.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:23.513Z,1528891763.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:23.883Z,1528891763.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:23.910Z,1528891763.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:24.306Z,1528891764.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:24.331Z,1528891764.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:24.711Z,1528891764.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:24.729Z,1528891764.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:25.101Z,1528891765.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:25.119Z,1528891765.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:25.487Z,1528891765.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:25.520Z,1528891765.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:25.884Z,1528891765.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:25.924Z,1528891765.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:26.283Z,1528891766.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:26.321Z,1528891766.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:26.698Z,1528891766.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:26.736Z,1528891766.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:27.098Z,1528891767.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:27.133Z,1528891767.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:27.498Z,1528891767.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:27.532Z,1528891767.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:27.890Z,1528891767.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:27.909Z,1528891767.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:28.286Z,1528891768.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:28.304Z,1528891768.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:28.689Z,1528891768.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:28.707Z,1528891768.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:29.090Z,1528891769.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:29.108Z,1528891769.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:29.501Z,1528891769.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:29.520Z,1528891769.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:29.898Z,1528891769.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:29.921Z,1528891769.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:30.298Z,1528891770.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:30.320Z,1528891770.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:30.694Z,1528891770.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:30.711Z,1528891770.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:31.093Z,1528891771.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:31.111Z,1528891771.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:31.493Z,1528891771.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:31.510Z,1528891771.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:31.894Z,1528891771.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:31.913Z,1528891771.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:32.287Z,1528891772.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:32.310Z,1528891772.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:32.698Z,1528891772.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:32.720Z,1528891772.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:33.098Z,1528891773.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:33.116Z,1528891773.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:33.498Z,1528891773.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:33.516Z,1528891773.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:33.891Z,1528891773.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:33.914Z,1528891773.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:34.293Z,1528891774.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:34.311Z,1528891774.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:34.695Z,1528891774.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:34.712Z,1528891774.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:35.092Z,1528891775.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:35.110Z,1528891775.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:35.498Z,1528891775.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:35.516Z,1528891775.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:35.898Z,1528891775.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:35.920Z,1528891775.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:36.298Z,1528891776.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:36.320Z,1528891776.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:36.692Z,1528891776.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:36.721Z,1528891776.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:37.087Z,1528891777.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:37.110Z,1528891777.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:37.491Z,1528891777.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:37.514Z,1528891777.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:37.890Z,1528891777.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:37.907Z,1528891777.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:38.293Z,1528891778.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:38.310Z,1528891778.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:38.702Z,1528891778.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:38.728Z,1528891778.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:39.102Z,1528891779.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:39.124Z,1528891779.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:39.502Z,1528891779.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:39.520Z,1528891779.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:39.891Z,1528891779.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:39.913Z,1528891779.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:40.290Z,1528891780.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:40.307Z,1528891780.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:40.692Z,1528891780.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:40.710Z,1528891780.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:41.093Z,1528891781.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:41.110Z,1528891781.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:41.503Z,1528891781.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:41.528Z,1528891781.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:41.902Z,1528891781.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:41.924Z,1528891781.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:42.302Z,1528891782.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:42.320Z,1528891782.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:42.694Z,1528891782.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:42.711Z,1528891782.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:43.093Z,1528891783.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:43.111Z,1528891783.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:43.493Z,1528891783.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:43.511Z,1528891783.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:43.894Z,1528891783.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:43.917Z,1528891783.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:44.294Z,1528891784.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:44.316Z,1528891784.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:44.703Z,1528891784.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:44.721Z,1528891784.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:45.103Z,1528891785.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:45.121Z,1528891785.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:45.503Z,1528891785.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:45.521Z,1528891785.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:45.891Z,1528891785.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:45.914Z,1528891785.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:46.295Z,1528891786.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:46.312Z,1528891786.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:46.694Z,1528891786.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:46.716Z,1528891786.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:47.090Z,1528891787.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:47.114Z,1528891787.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:47.504Z,1528891787.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:47.522Z,1528891787.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:47.907Z,1528891787.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:47.924Z,1528891787.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:48.303Z,1528891788.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:48.322Z,1528891788.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:48.687Z,1528891788.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:48.725Z,1528891788.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:49.088Z,1528891789.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:49.120Z,1528891789.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:49.483Z,1528891789.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:49.512Z,1528891789.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:49.888Z,1528891789.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:49.925Z,1528891789.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:50.287Z,1528891790.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:50.320Z,1528891790.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:50.697Z,1528891790.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:50.725Z,1528891790.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:51.102Z,1528891791.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:51.131Z,1528891791.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:51.498Z,1528891791.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:51.525Z,1528891791.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:51.887Z,1528891791.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:51.927Z,1528891791.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:52.287Z,1528891792.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:52.331Z,1528891792.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:52.688Z,1528891792.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:52.728Z,1528891792.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:53.087Z,1528891793.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:53.124Z,1528891793.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:53.501Z,1528891793.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:53.540Z,1528891793.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:53.902Z,1528891793.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:53.930Z,1528891793.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:54.297Z,1528891794.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:54.332Z,1528891794.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:54.687Z,1528891794.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:54.705Z,1528891794.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:55.091Z,1528891795.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:55.109Z,1528891795.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:55.490Z,1528891795.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:55.508Z,1528891795.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:55.891Z,1528891795.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:55.909Z,1528891795.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:56.290Z,1528891796.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:56.308Z,1528891796.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:56.701Z,1528891796.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:56.735Z,1528891796.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:57.101Z,1528891797.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:57.146Z,1528891797.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:57.501Z,1528891797.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:57.519Z,1528891797.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:57.892Z,1528891797.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:57.910Z,1528891797.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:58.292Z,1528891798.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:58.324Z,1528891798.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:58.698Z,1528891798.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:58.720Z,1528891798.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:59.090Z,1528891799.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:59.113Z,1528891799.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:59.507Z,1528891799.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:59.525Z,1528891799.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:09:59.905Z,1528891799.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:09:59.924Z,1528891799.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:00.303Z,1528891800.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:00.320Z,1528891800.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:00.692Z,1528891800.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:00.721Z,1528891800.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:01.093Z,1528891801.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:01.111Z,1528891801.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:01.497Z,1528891801.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:01.515Z,1528891801.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:01.899Z,1528891801.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:01.917Z,1528891801.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:05.000Z,1528891805.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:05.018Z,1528891805.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:05.134Z,1528891805.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:05.177Z,1528891805.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:05.544Z,1528891805.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:05.563Z,1528891805.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:05.943Z,1528891805.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:05.961Z,1528891805.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:06.323Z,1528891806.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:06.360Z,1528891806.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:06.724Z,1528891806.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:06.760Z,1528891806.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:07.133Z,1528891807.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:07.156Z,1528891807.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:07.544Z,1528891807.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:07.562Z,1528891807.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:07.945Z,1528891807.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:07.963Z,1528891807.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:08.340Z,1528891808.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:08.360Z,1528891808.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:08.723Z,1528891808.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:08.752Z,1528891808.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:09.124Z,1528891809.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:09.163Z,1528891809.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:09.523Z,1528891809.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:09.556Z,1528891809.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:09.924Z,1528891809.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:09.965Z,1528891809.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:10.323Z,1528891810.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:10.365Z,1528891810.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:10.741Z,1528891810.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:10.759Z,1528891810.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:11.142Z,1528891811.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:11.160Z,1528891811.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:11.542Z,1528891811.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:11.583Z,1528891811.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:11.923Z,1528891811.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:11.957Z,1528891811.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:12.322Z,1528891812.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:12.356Z,1528891812.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:12.724Z,1528891812.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:12.756Z,1528891812.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:13.123Z,1528891813.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:13.160Z,1528891813.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:13.541Z,1528891813.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:13.559Z,1528891813.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:13.943Z,1528891813.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:13.961Z,1528891813.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:14.340Z,1528891814.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:14.360Z,1528891814.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:14.723Z,1528891814.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:14.759Z,1528891814.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:15.123Z,1528891815.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:15.158Z,1528891815.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:15.519Z,1528891815.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:15.536Z,1528891815.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:15.924Z,1528891815.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:15.953Z,1528891815.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:16.323Z,1528891816.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:16.341Z,1528891816.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:16.737Z,1528891816.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:16.772Z,1528891816.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:17.141Z,1528891817.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:17.175Z,1528891817.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:17.541Z,1528891817.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:17.570Z,1528891817.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:17.923Z,1528891817.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:17.941Z,1528891817.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:18.327Z,1528891818.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:18.368Z,1528891818.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:18.726Z,1528891818.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:18.752Z,1528891818.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:19.124Z,1528891819.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:19.142Z,1528891819.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:19.529Z,1528891819.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:19.547Z,1528891819.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:19.937Z,1528891819.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:19.955Z,1528891819.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:20.330Z,1528891820.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:20.353Z,1528891820.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:20.726Z,1528891820.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:20.744Z,1528891820.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:21.130Z,1528891821.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:21.148Z,1528891821.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:21.528Z,1528891821.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:21.546Z,1528891821.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:21.928Z,1528891821.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:21.946Z,1528891821.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:22.329Z,1528891822.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:22.347Z,1528891822.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:22.730Z,1528891822.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:22.752Z,1528891822.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:23.138Z,1528891823.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:23.160Z,1528891823.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:23.537Z,1528891823.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:23.555Z,1528891823.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:23.928Z,1528891823.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:23.946Z,1528891823.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:24.322Z,1528891824.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:24.351Z,1528891824.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:24.728Z,1528891824.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:24.758Z,1528891824.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:25.125Z,1528891825.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:25.143Z,1528891825.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:25.534Z,1528891825.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:25.556Z,1528891825.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:25.937Z,1528891825.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:25.955Z,1528891825.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:26.334Z,1528891826.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:26.356Z,1528891826.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:26.728Z,1528891826.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:26.746Z,1528891826.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:27.130Z,1528891827.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:27.148Z,1528891827.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:27.522Z,1528891827.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:27.552Z,1528891827.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:27.928Z,1528891827.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:27.954Z,1528891827.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:28.351Z,1528891828.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:28.760Z,1528891828.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:29.156Z,1528891829.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:29.542Z,1528891829.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:29.561Z,1528891829.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:29.919Z,1528891829.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:29.952Z,1528891829.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:30.326Z,1528891830.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:30.349Z,1528891830.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:30.758Z,1528891830.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:31.148Z,1528891831.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:31.557Z,1528891831.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:31.964Z,1528891831.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:32.353Z,1528891832.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:32.748Z,1528891832.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:33.155Z,1528891833.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:33.549Z,1528891833.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:33.954Z,1528891833.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:34.360Z,1528891834.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:34.759Z,1528891834.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:35.163Z,1528891835.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:35.563Z,1528891835.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:35.948Z,1528891835.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:36.361Z,1528891836.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:36.724Z,1528891836.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:36.766Z,1528891836.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:37.123Z,1528891837.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:37.169Z,1528891837.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:37.537Z,1528891837.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:37.573Z,1528891837.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:37.941Z,1528891837.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:37.971Z,1528891837.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:38.337Z,1528891838.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:38.372Z,1528891838.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:38.727Z,1528891838.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:38.772Z,1528891838.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:39.126Z,1528891839.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:39.144Z,1528891839.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:39.523Z,1528891839.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:39.540Z,1528891839.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:39.926Z,1528891839.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:39.948Z,1528891839.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:40.348Z,1528891840.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:40.751Z,1528891840.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:41.170Z,1528891841.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:41.572Z,1528891841.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:41.943Z,1528891841.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:42.344Z,1528891842.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:42.744Z,1528891842.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:43.146Z,1528891843.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:43.551Z,1528891843.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:43.955Z,1528891843.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:44.351Z,1528891844.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:44.746Z,1528891844.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:45.148Z,1528891845.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:45.547Z,1528891845.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:45.946Z,1528891845.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:46.348Z,1528891846.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:46.767Z,1528891846.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:47.168Z,1528891847.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:47.572Z,1528891847.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:47.963Z,1528891847.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:48.363Z,1528891848.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:48.758Z,1528891848.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:49.142Z,1528891849.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:49.571Z,1528891849.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:49.970Z,1528891849.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:50.371Z,1528891850.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:50.766Z,1528891850.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:51.145Z,1528891851.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:51.539Z,1528891851.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:51.948Z,1528891851.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:52.344Z,1528891852.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:52.774Z,1528891852.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:53.176Z,1528891853.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:53.555Z,1528891853.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:53.946Z,1528891853.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:54.345Z,1528891854.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:54.747Z,1528891854.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:55.143Z,1528891855.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:55.551Z,1528891855.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:55.955Z,1528891855.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:56.351Z,1528891856.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:56.746Z,1528891856.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:57.146Z,1528891857.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:57.545Z,1528891857.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:57.946Z,1528891857.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:58.329Z,1528891858.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:58.347Z,1528891858.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:58.730Z,1528891858.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:58.752Z,1528891858.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:59.137Z,1528891859.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:59.155Z,1528891859.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:59.538Z,1528891859.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:59.556Z,1528891859.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:10:59.928Z,1528891859.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:10:59.953Z,1528891859.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:00.328Z,1528891860.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:00.345Z,1528891860.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:00.730Z,1528891860.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:00.748Z,1528891860.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:01.123Z,1528891861.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:01.145Z,1528891861.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:01.533Z,1528891861.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:01.551Z,1528891861.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:01.937Z,1528891861.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:01.955Z,1528891861.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:05.050Z,1528891865.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:05.083Z,1528891865.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:05.199Z,1528891865.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:05.229Z,1528891865.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:05.595Z,1528891865.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:05.633Z,1528891865.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:05.995Z,1528891865.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:06.029Z,1528891866.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:06.396Z,1528891866.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:06.436Z,1528891866.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:06.841Z,1528891866.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:07.237Z,1528891867.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:07.642Z,1528891867.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:08.018Z,1528891868.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:08.415Z,1528891868.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:08.817Z,1528891868.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:09.216Z,1528891869.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:09.642Z,1528891869.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:10.041Z,1528891870.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:10.443Z,1528891870.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:10.820Z,1528891870.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:11.220Z,1528891871.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:11.620Z,1528891871.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:12.015Z,1528891872.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:12.415Z,1528891872.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:12.844Z,1528891872.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:13.227Z,1528891873.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:13.627Z,1528891873.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:14.016Z,1528891874.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:14.415Z,1528891874.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:14.820Z,1528891874.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:15.216Z,1528891875.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:15.627Z,1528891875.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:16.023Z,1528891876.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:16.427Z,1528891876.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:16.818Z,1528891876.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:17.224Z,1528891877.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:17.630Z,1528891877.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:18.020Z,1528891878.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:18.419Z,1528891878.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:18.827Z,1528891878.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:19.228Z,1528891879.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:19.628Z,1528891879.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:20.003Z,1528891880.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:20.021Z,1528891880.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:20.395Z,1528891880.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:20.420Z,1528891880.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:20.794Z,1528891880.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:20.824Z,1528891880.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:21.195Z,1528891881.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:21.221Z,1528891881.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:21.611Z,1528891881.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:21.636Z,1528891881.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:22.010Z,1528891882.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:22.032Z,1528891882.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:22.411Z,1528891882.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:22.452Z,1528891882.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:22.801Z,1528891882.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:22.819Z,1528891882.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:23.199Z,1528891883.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:23.237Z,1528891883.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:23.620Z,1528891883.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:24.019Z,1528891884.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:24.420Z,1528891884.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:24.833Z,1528891884.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:25.229Z,1528891885.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:25.632Z,1528891885.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:26.020Z,1528891886.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:26.418Z,1528891886.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:26.819Z,1528891886.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:27.221Z,1528891887.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:27.629Z,1528891887.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:28.032Z,1528891888.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:28.433Z,1528891888.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:28.818Z,1528891888.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:29.222Z,1528891889.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:29.624Z,1528891889.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:30.024Z,1528891890.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:30.419Z,1528891890.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:30.830Z,1528891890.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:31.230Z,1528891891.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:31.633Z,1528891891.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:32.025Z,1528891892.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:32.417Z,1528891892.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:32.832Z,1528891892.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:33.230Z,1528891893.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:33.629Z,1528891893.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:34.034Z,1528891894.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:34.434Z,1528891894.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:34.821Z,1528891894.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:35.220Z,1528891895.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:35.622Z,1528891895.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:36.022Z,1528891896.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:36.420Z,1528891896.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:36.834Z,1528891896.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:37.229Z,1528891897.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:37.628Z,1528891897.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:38.022Z,1528891898.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:38.420Z,1528891898.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:38.822Z,1528891898.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:39.195Z,1528891899.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:39.228Z,1528891899.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:39.612Z,1528891899.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:39.629Z,1528891899.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:40.015Z,1528891900.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:40.033Z,1528891900.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:40.416Z,1528891900.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:40.433Z,1528891900.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:40.795Z,1528891900.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:40.828Z,1528891900.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:41.195Z,1528891901.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:41.231Z,1528891901.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:41.595Z,1528891901.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:41.623Z,1528891901.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:41.992Z,1528891901.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:42.019Z,1528891902.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:42.395Z,1528891902.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:11:42.426Z,1528891902.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:42.829Z,1528891902.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:43.233Z,1528891903.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:43.630Z,1528891903.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:44.022Z,1528891904.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:44.416Z,1528891904.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:44.820Z,1528891904.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:45.222Z,1528891905.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:45.626Z,1528891905.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:46.032Z,1528891906.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:46.436Z,1528891906.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:46.820Z,1528891906.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:47.220Z,1528891907.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:47.622Z,1528891907.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:48.021Z,1528891908.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:48.428Z,1528891908.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:48.833Z,1528891908.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:49.233Z,1528891909.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:49.628Z,1528891909.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:50.022Z,1528891910.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:50.421Z,1528891910.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:50.820Z,1528891910.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:51.223Z,1528891911.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:51.633Z,1528891911.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:52.039Z,1528891912.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:52.440Z,1528891912.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:52.820Z,1528891912.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:53.228Z,1528891913.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:53.623Z,1528891913.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:54.021Z,1528891914.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:54.420Z,1528891914.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:54.833Z,1528891914.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:55.236Z,1528891915.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:55.629Z,1528891915.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:56.028Z,1528891916.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:56.421Z,1528891916.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:56.824Z,1528891916.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:56.824Z,1528891916.824 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 175
2018-06-13T12:11:56.824Z,1528891916.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:11:56.826Z,1528891916.826 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:56.826Z,1528891916.826 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 175
2018-06-13T12:11:56.826Z,1528891916.826 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:11:56.828Z,1528891916.828 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:56.828Z,1528891916.828 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 175
2018-06-13T12:11:56.828Z,1528891916.828 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:11:56.901Z,1528891916.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:11:56.901Z,1528891916.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:11:56.902Z,1528891916.902 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:11:57.329Z,1528891917.329 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:11:57.329Z,1528891917.329 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 175
2018-06-13T12:11:57.329Z,1528891917.329 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:11:57.329Z,1528891917.329 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 175
2018-06-13T12:11:57.330Z,1528891917.330 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:11:57.330Z,1528891917.330 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 175
2018-06-13T12:11:57.628Z,1528891917.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:11:57.629Z,1528891917.629 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:11:57.629Z,1528891917.629 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:11:57.630Z,1528891917.630 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:11:57.630Z,1528891917.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:11:57.630Z,1528891917.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:11:57.631Z,1528891917.631 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:11:57.631Z,1528891917.631 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:11:57.631Z,1528891917.631 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:11:58.044Z,1528891918.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:11:58.045Z,1528891918.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:58.436Z,1528891918.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:11:58.437Z,1528891918.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:58.812Z,1528891918.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:11:58.813Z,1528891918.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:59.216Z,1528891919.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:11:59.233Z,1528891919.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:11:59.617Z,1528891919.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:11:59.618Z,1528891919.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:00.020Z,1528891920.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:12:00.037Z,1528891920.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:00.415Z,1528891920.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:12:00.416Z,1528891920.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:00.846Z,1528891920.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:12:00.847Z,1528891920.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:01.286Z,1528891921.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T12:12:01.287Z,1528891921.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:01.644Z,1528891921.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:12:01.645Z,1528891921.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:02.024Z,1528891922.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:12:02.045Z,1528891922.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:05.125Z,1528891925.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T12:12:05.126Z,1528891925.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:05.304Z,1528891925.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T12:12:05.305Z,1528891925.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:05.708Z,1528891925.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T12:12:05.709Z,1528891925.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:06.102Z,1528891926.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T12:12:06.103Z,1528891926.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:06.502Z,1528891926.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T12:12:06.503Z,1528891926.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:06.879Z,1528891926.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T12:12:06.880Z,1528891926.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:07.300Z,1528891927.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T12:12:07.305Z,1528891927.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:07.704Z,1528891927.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T12:12:07.709Z,1528891927.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:08.085Z,1528891928.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T12:12:08.086Z,1528891928.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:08.479Z,1528891928.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T12:12:08.480Z,1528891928.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:08.907Z,1528891928.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T12:12:08.908Z,1528891928.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:09.291Z,1528891929.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T12:12:09.292Z,1528891929.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:09.691Z,1528891929.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T12:12:09.692Z,1528891929.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:10.084Z,1528891930.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T12:12:10.085Z,1528891930.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:10.482Z,1528891930.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T12:12:10.483Z,1528891930.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:10.883Z,1528891930.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T12:12:10.884Z,1528891930.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:11.284Z,1528891931.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T12:12:11.285Z,1528891931.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:11.710Z,1528891931.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T12:12:11.711Z,1528891931.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:12.090Z,1528891932.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T12:12:12.091Z,1528891932.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:12.487Z,1528891932.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T12:12:12.487Z,1528891932.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:12.884Z,1528891932.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T12:12:12.885Z,1528891932.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:13.284Z,1528891933.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T12:12:13.284Z,1528891933.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:13.688Z,1528891933.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T12:12:13.689Z,1528891933.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:14.083Z,1528891934.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T12:12:14.084Z,1528891934.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:14.481Z,1528891934.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T12:12:14.482Z,1528891934.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:14.887Z,1528891934.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T12:12:14.888Z,1528891934.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:15.320Z,1528891935.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T12:12:15.321Z,1528891935.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:15.684Z,1528891935.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T12:12:15.686Z,1528891935.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:16.094Z,1528891936.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T12:12:16.095Z,1528891936.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:16.488Z,1528891936.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T12:12:16.489Z,1528891936.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:16.879Z,1528891936.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:17.288Z,1528891937.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:17.720Z,1528891937.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:18.092Z,1528891938.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:18.496Z,1528891938.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:18.885Z,1528891938.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:19.283Z,1528891939.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:19.689Z,1528891939.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:20.102Z,1528891940.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:20.481Z,1528891940.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:20.892Z,1528891940.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:21.291Z,1528891941.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:21.687Z,1528891941.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:22.082Z,1528891942.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:22.484Z,1528891942.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:22.880Z,1528891942.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:23.283Z,1528891943.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:23.692Z,1528891943.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:24.092Z,1528891944.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:24.493Z,1528891944.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:24.884Z,1528891944.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:25.283Z,1528891945.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:25.682Z,1528891945.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:26.085Z,1528891946.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:26.480Z,1528891946.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:26.842Z,1528891946.842 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T12:12:26.842Z,1528891946.842 [NAL9602] Data Fault, FailCount= 3
2018-06-13T12:12:26.843Z,1528891946.843 [NAL9602](ERROR): Data Fault
2018-06-13T12:12:26.892Z,1528891946.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:26.977Z,1528891946.977 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T12:12:27.242Z,1528891947.242 [NAL9602](INFO): Powering down
2018-06-13T12:12:27.293Z,1528891947.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:27.678Z,1528891947.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:28.082Z,1528891948.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:28.158Z,1528891948.158 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T12:12:28.158Z,1528891948.158 [NAL9602] No Fault, FailCount= 3
2018-06-13T12:12:28.488Z,1528891948.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:28.878Z,1528891948.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:29.284Z,1528891949.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:29.681Z,1528891949.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:30.079Z,1528891950.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:30.483Z,1528891950.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:30.888Z,1528891950.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:31.282Z,1528891951.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:31.688Z,1528891951.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:32.088Z,1528891952.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:32.478Z,1528891952.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:32.884Z,1528891952.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:33.285Z,1528891953.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:33.678Z,1528891953.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:34.083Z,1528891954.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:34.481Z,1528891954.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:34.879Z,1528891954.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:35.283Z,1528891955.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:35.688Z,1528891955.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:36.078Z,1528891956.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:36.483Z,1528891956.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:36.888Z,1528891956.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:37.280Z,1528891957.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:37.681Z,1528891957.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:38.082Z,1528891958.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:38.482Z,1528891958.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:38.884Z,1528891958.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:39.288Z,1528891959.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:39.681Z,1528891959.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:40.082Z,1528891960.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:40.482Z,1528891960.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:40.880Z,1528891960.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:41.282Z,1528891961.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:41.684Z,1528891961.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:42.080Z,1528891962.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:42.485Z,1528891962.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:42.886Z,1528891962.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:43.283Z,1528891963.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:43.686Z,1528891963.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:44.083Z,1528891964.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:44.487Z,1528891964.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:44.891Z,1528891964.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:45.292Z,1528891965.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:45.692Z,1528891965.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:46.084Z,1528891966.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:46.487Z,1528891966.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:46.884Z,1528891966.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:47.288Z,1528891967.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:47.699Z,1528891967.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:48.092Z,1528891968.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:48.493Z,1528891968.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:48.876Z,1528891968.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:49.276Z,1528891969.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:49.692Z,1528891969.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:50.083Z,1528891970.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:50.480Z,1528891970.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:50.879Z,1528891970.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:51.275Z,1528891971.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:51.676Z,1528891971.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:52.080Z,1528891972.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:52.479Z,1528891972.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:52.880Z,1528891972.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:53.280Z,1528891973.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:53.679Z,1528891973.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:54.076Z,1528891974.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:54.480Z,1528891974.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:54.879Z,1528891974.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:55.280Z,1528891975.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:55.680Z,1528891975.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:56.080Z,1528891976.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:56.476Z,1528891976.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:56.879Z,1528891976.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:57.245Z,1528891977.245 [NAL9602](INFO): Powering up NAL9602
2018-06-13T12:12:57.280Z,1528891977.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:57.675Z,1528891977.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:58.079Z,1528891978.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:58.479Z,1528891978.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:58.880Z,1528891978.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:59.278Z,1528891979.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:12:59.679Z,1528891979.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:00.076Z,1528891980.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:00.478Z,1528891980.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:00.862Z,1528891980.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:00.880Z,1528891980.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:01.261Z,1528891981.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:01.279Z,1528891981.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:01.661Z,1528891981.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:01.680Z,1528891981.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:02.064Z,1528891982.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:02.082Z,1528891982.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:05.168Z,1528891985.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:05.186Z,1528891985.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:05.318Z,1528891985.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:05.366Z,1528891985.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:05.718Z,1528891985.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:05.735Z,1528891985.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:06.113Z,1528891986.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:06.132Z,1528891986.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:06.513Z,1528891986.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:06.530Z,1528891986.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:06.914Z,1528891986.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:06.932Z,1528891986.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:07.311Z,1528891987.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:07.329Z,1528891987.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:07.724Z,1528891987.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:07.764Z,1528891987.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:08.097Z,1528891988.097 [NAL9602](INFO): NAL9602 initialized
2018-06-13T12:13:08.114Z,1528891988.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:08.132Z,1528891988.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:08.511Z,1528891988.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:08.529Z,1528891988.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:08.925Z,1528891988.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:08.965Z,1528891988.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:09.325Z,1528891989.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:09.359Z,1528891989.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:09.717Z,1528891989.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:09.735Z,1528891989.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:10.115Z,1528891990.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:10.136Z,1528891990.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:10.514Z,1528891990.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:10.532Z,1528891990.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:10.916Z,1528891990.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:10.935Z,1528891990.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:11.325Z,1528891991.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:13:11.342Z,1528891991.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:11.764Z,1528891991.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:12.136Z,1528891992.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:12.533Z,1528891992.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:12.940Z,1528891992.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:13.338Z,1528891993.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:13.748Z,1528891993.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:14.135Z,1528891994.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:14.530Z,1528891994.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:14.942Z,1528891994.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:15.343Z,1528891995.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:15.740Z,1528891995.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:16.144Z,1528891996.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:16.543Z,1528891996.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:16.940Z,1528891996.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:17.348Z,1528891997.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:17.744Z,1528891997.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:18.130Z,1528891998.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:18.536Z,1528891998.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:18.948Z,1528891998.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:19.343Z,1528891999.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:19.749Z,1528891999.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:20.135Z,1528892000.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:20.533Z,1528892000.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:20.948Z,1528892000.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:21.348Z,1528892001.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:21.740Z,1528892001.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:22.135Z,1528892002.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:22.546Z,1528892002.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:22.941Z,1528892002.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:23.348Z,1528892003.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:23.745Z,1528892003.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:24.135Z,1528892004.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:24.545Z,1528892004.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:24.948Z,1528892004.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:25.348Z,1528892005.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:25.748Z,1528892005.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:26.138Z,1528892006.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:26.532Z,1528892006.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:26.952Z,1528892006.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:27.348Z,1528892007.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:27.741Z,1528892007.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:28.136Z,1528892008.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:28.540Z,1528892008.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:28.941Z,1528892008.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:29.352Z,1528892009.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:29.748Z,1528892009.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:30.135Z,1528892010.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:30.544Z,1528892010.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:30.949Z,1528892010.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:31.345Z,1528892011.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:31.749Z,1528892011.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:32.140Z,1528892012.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:32.532Z,1528892012.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:32.947Z,1528892012.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:33.348Z,1528892013.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:33.745Z,1528892013.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:34.139Z,1528892014.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:34.540Z,1528892014.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:34.936Z,1528892014.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:35.349Z,1528892015.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:35.752Z,1528892015.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:36.146Z,1528892016.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:36.540Z,1528892016.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:36.938Z,1528892016.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:37.335Z,1528892017.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:37.744Z,1528892017.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:38.142Z,1528892018.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:38.548Z,1528892018.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:38.959Z,1528892018.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:39.348Z,1528892019.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:39.732Z,1528892019.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:40.137Z,1528892020.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:40.540Z,1528892020.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:40.941Z,1528892020.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:41.350Z,1528892021.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:41.746Z,1528892021.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:42.139Z,1528892022.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:42.536Z,1528892022.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:42.944Z,1528892022.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:43.337Z,1528892023.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:43.737Z,1528892023.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:44.145Z,1528892024.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:44.548Z,1528892024.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:44.956Z,1528892024.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:45.338Z,1528892025.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:45.737Z,1528892025.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:46.136Z,1528892026.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:46.539Z,1528892026.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:46.935Z,1528892026.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:47.349Z,1528892027.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:47.746Z,1528892027.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:48.144Z,1528892028.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:48.539Z,1528892028.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:48.941Z,1528892028.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:49.337Z,1528892029.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:49.736Z,1528892029.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:50.145Z,1528892030.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:50.548Z,1528892030.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:50.949Z,1528892030.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:51.343Z,1528892031.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:51.736Z,1528892031.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:52.136Z,1528892032.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:52.540Z,1528892032.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:52.936Z,1528892032.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:53.349Z,1528892033.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:53.744Z,1528892033.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:54.144Z,1528892034.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:54.536Z,1528892034.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:54.938Z,1528892034.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:55.338Z,1528892035.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:55.740Z,1528892035.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:56.145Z,1528892036.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:56.548Z,1528892036.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:56.956Z,1528892036.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:57.343Z,1528892037.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:57.736Z,1528892037.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:58.137Z,1528892038.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:58.539Z,1528892038.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:58.936Z,1528892038.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:59.350Z,1528892039.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:13:59.749Z,1528892039.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:00.192Z,1528892040.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:00.537Z,1528892040.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:00.938Z,1528892040.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:01.337Z,1528892041.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:01.744Z,1528892041.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:02.149Z,1528892042.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:05.250Z,1528892045.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:05.253Z,1528892045.253 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T12:09:04.0Z
2018-06-13T12:14:05.253Z,1528892045.253 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T12:14:05.253Z,1528892045.253 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T12:14:05.411Z,1528892045.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:06.555Z,1528892046.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:06.708Z,1528892046.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:07.105Z,1528892047.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:07.516Z,1528892047.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:07.906Z,1528892047.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:08.294Z,1528892048.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:08.697Z,1528892048.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:11.840Z,1528892051.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:11.939Z,1528892051.939 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0204.lzma
2018-06-13T12:14:12.018Z,1528892052.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:12.407Z,1528892052.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:12.738Z,1528892052.738 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0204.lzma.bak
2018-06-13T12:14:12.738Z,1528892052.738 [DataOverHttps](INFO): SBD MOMSN=8329200
2018-06-13T12:14:12.813Z,1528892052.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:14.709Z,1528892054.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:14.855Z,1528892054.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:15.256Z,1528892055.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:15.655Z,1528892055.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:16.055Z,1528892056.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:19.205Z,1528892059.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:19.369Z,1528892059.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:19.756Z,1528892059.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:20.157Z,1528892060.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:20.532Z,1528892060.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:20.940Z,1528892060.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:21.372Z,1528892061.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:21.747Z,1528892061.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:22.147Z,1528892062.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:22.544Z,1528892062.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:22.935Z,1528892062.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:23.340Z,1528892063.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:23.748Z,1528892063.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:24.156Z,1528892064.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:24.556Z,1528892064.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:28.996Z,1528892068.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:29.086Z,1528892069.086 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0205.lzma
2018-06-13T12:14:29.179Z,1528892069.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:29.538Z,1528892069.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:29.884Z,1528892069.884 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0205.lzma.bak
2018-06-13T12:14:29.884Z,1528892069.884 [DataOverHttps](INFO): SBD MOMSN=8329202
2018-06-13T12:14:29.950Z,1528892069.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:31.805Z,1528892071.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:31.808Z,1528892071.808 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T12:14:31.808Z,1528892071.808 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T12:14:31.808Z,1528892071.808 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T12:14:31.960Z,1528892071.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:35.087Z,1528892075.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:35.284Z,1528892075.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:35.646Z,1528892075.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:36.049Z,1528892076.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:36.441Z,1528892076.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:36.829Z,1528892076.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:37.252Z,1528892077.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:37.645Z,1528892077.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:38.044Z,1528892078.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:38.446Z,1528892078.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:38.820Z,1528892078.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:39.220Z,1528892079.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:39.659Z,1528892079.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:40.025Z,1528892080.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:40.452Z,1528892080.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:40.859Z,1528892080.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:41.259Z,1528892081.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:41.628Z,1528892081.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:42.025Z,1528892082.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:42.427Z,1528892082.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:42.827Z,1528892082.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:43.236Z,1528892083.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:43.636Z,1528892083.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:44.035Z,1528892084.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:44.439Z,1528892084.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:44.823Z,1528892084.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:45.239Z,1528892085.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:45.636Z,1528892085.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:46.032Z,1528892086.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:46.448Z,1528892086.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:46.848Z,1528892086.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:47.238Z,1528892087.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:47.628Z,1528892087.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:48.033Z,1528892088.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:48.428Z,1528892088.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:48.828Z,1528892088.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:49.242Z,1528892089.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:49.636Z,1528892089.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:50.038Z,1528892090.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:50.438Z,1528892090.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:50.830Z,1528892090.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:51.228Z,1528892091.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:51.637Z,1528892091.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:52.034Z,1528892092.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:52.437Z,1528892092.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:52.843Z,1528892092.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:53.244Z,1528892093.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:53.638Z,1528892093.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:54.037Z,1528892094.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:54.433Z,1528892094.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:54.838Z,1528892094.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:55.242Z,1528892095.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:55.638Z,1528892095.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:56.038Z,1528892096.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:56.439Z,1528892096.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:56.837Z,1528892096.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:57.220Z,1528892097.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:57.622Z,1528892097.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:58.020Z,1528892098.020 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:58.020Z,1528892098.020 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 176
2018-06-13T12:14:58.020Z,1528892098.020 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:14:58.022Z,1528892098.022 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:58.023Z,1528892098.023 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 176
2018-06-13T12:14:58.023Z,1528892098.023 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:14:58.024Z,1528892098.024 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:58.024Z,1528892098.024 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 176
2018-06-13T12:14:58.024Z,1528892098.024 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:14:58.117Z,1528892098.117 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:14:58.117Z,1528892098.117 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:14:58.118Z,1528892098.118 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:14:58.525Z,1528892098.525 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:14:58.525Z,1528892098.525 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 176
2018-06-13T12:14:58.526Z,1528892098.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:14:58.526Z,1528892098.526 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 176
2018-06-13T12:14:58.526Z,1528892098.526 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:14:58.526Z,1528892098.526 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 176
2018-06-13T12:14:58.835Z,1528892098.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:14:58.835Z,1528892098.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:14:58.835Z,1528892098.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:14:58.836Z,1528892098.836 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:14:58.836Z,1528892098.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:14:58.853Z,1528892098.853 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:14:58.853Z,1528892098.853 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:14:58.854Z,1528892098.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:14:58.854Z,1528892098.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:14:59.231Z,1528892099.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:14:59.232Z,1528892099.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:14:59.630Z,1528892099.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:14:59.631Z,1528892099.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:00.010Z,1528892100.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:00.027Z,1528892100.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:15:00.028Z,1528892100.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:00.406Z,1528892100.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:00.423Z,1528892100.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:15:00.424Z,1528892100.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:00.809Z,1528892100.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:00.826Z,1528892100.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:15:00.827Z,1528892100.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:01.221Z,1528892101.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:01.238Z,1528892101.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:15:01.239Z,1528892101.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:01.619Z,1528892101.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:01.644Z,1528892101.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:15:01.645Z,1528892101.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:02.018Z,1528892102.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:02.036Z,1528892102.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:15:02.037Z,1528892102.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:02.404Z,1528892102.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:02.437Z,1528892102.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T12:15:02.438Z,1528892102.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:02.799Z,1528892102.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:02.826Z,1528892102.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:15:02.827Z,1528892102.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:03.203Z,1528892103.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:03.230Z,1528892103.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:15:03.231Z,1528892103.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:03.604Z,1528892103.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:03.643Z,1528892103.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:15:03.644Z,1528892103.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:04.003Z,1528892104.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:04.030Z,1528892104.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:15:04.031Z,1528892104.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:04.424Z,1528892104.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:04.441Z,1528892104.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T12:15:04.442Z,1528892104.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:04.824Z,1528892104.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:04.842Z,1528892104.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T12:15:04.842Z,1528892104.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:05.215Z,1528892105.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:05.233Z,1528892105.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T12:15:05.234Z,1528892105.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:05.598Z,1528892105.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:05.630Z,1528892105.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:15:05.631Z,1528892105.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:06.031Z,1528892106.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:15:06.032Z,1528892106.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:06.509Z,1528892106.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T12:15:06.510Z,1528892106.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:06.955Z,1528892106.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T12:15:06.956Z,1528892106.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:07.272Z,1528892107.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T12:15:07.273Z,1528892107.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:07.638Z,1528892107.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:15:07.639Z,1528892107.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:08.054Z,1528892108.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:15:08.055Z,1528892108.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:08.475Z,1528892108.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T12:15:08.476Z,1528892108.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:08.856Z,1528892108.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:15:08.857Z,1528892108.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:09.225Z,1528892109.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:15:09.226Z,1528892109.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:09.639Z,1528892109.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:15:09.640Z,1528892109.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:10.023Z,1528892110.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:15:10.024Z,1528892110.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:10.436Z,1528892110.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:15:10.438Z,1528892110.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:10.835Z,1528892110.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:15:10.836Z,1528892110.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:11.234Z,1528892111.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:15:11.235Z,1528892111.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:11.626Z,1528892111.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:15:11.627Z,1528892111.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:12.027Z,1528892112.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:15:12.028Z,1528892112.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:12.425Z,1528892112.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:15:12.426Z,1528892112.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:12.827Z,1528892112.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T12:15:12.828Z,1528892112.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:13.242Z,1528892113.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:15:13.243Z,1528892113.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:13.636Z,1528892113.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:15:13.637Z,1528892113.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:14.040Z,1528892114.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:15:14.041Z,1528892114.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:14.410Z,1528892114.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:14.428Z,1528892114.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:15:14.429Z,1528892114.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:14.806Z,1528892114.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:14.828Z,1528892114.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:15:14.829Z,1528892114.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:15.207Z,1528892115.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:15.231Z,1528892115.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:15:15.232Z,1528892115.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:15.629Z,1528892115.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:15:15.630Z,1528892115.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:16.029Z,1528892116.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:15:16.030Z,1528892116.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:16.436Z,1528892116.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:15:16.437Z,1528892116.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:16.819Z,1528892116.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:16.837Z,1528892116.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:15:16.838Z,1528892116.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:17.214Z,1528892117.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:17.253Z,1528892117.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:15:17.254Z,1528892117.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:17.603Z,1528892117.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:17.639Z,1528892117.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:15:17.640Z,1528892117.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:18.004Z,1528892118.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:18.035Z,1528892118.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:18.404Z,1528892118.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:18.436Z,1528892118.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:18.803Z,1528892118.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:18.840Z,1528892118.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:19.223Z,1528892119.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:19.242Z,1528892119.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:19.618Z,1528892119.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:19.648Z,1528892119.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:20.020Z,1528892120.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:15:20.038Z,1528892120.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:20.438Z,1528892120.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:20.835Z,1528892120.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:21.234Z,1528892121.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:21.642Z,1528892121.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:22.040Z,1528892122.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:22.448Z,1528892122.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:22.843Z,1528892122.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:23.248Z,1528892123.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:23.640Z,1528892123.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:24.034Z,1528892124.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:24.418Z,1528892124.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:24.844Z,1528892124.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:25.251Z,1528892125.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:25.648Z,1528892125.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:26.050Z,1528892126.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:26.426Z,1528892126.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:26.819Z,1528892126.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:27.223Z,1528892127.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:27.632Z,1528892127.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:28.023Z,1528892128.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:28.432Z,1528892128.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:28.835Z,1528892128.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:29.232Z,1528892129.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:29.628Z,1528892129.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:30.027Z,1528892130.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:30.423Z,1528892130.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:30.825Z,1528892130.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:31.235Z,1528892131.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:31.636Z,1528892131.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:32.035Z,1528892132.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:32.432Z,1528892132.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:35.530Z,1528892135.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:35.675Z,1528892135.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:36.077Z,1528892136.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:36.478Z,1528892136.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:36.868Z,1528892136.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:37.268Z,1528892137.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:37.666Z,1528892137.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:38.065Z,1528892138.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:38.475Z,1528892138.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:38.871Z,1528892138.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:39.266Z,1528892139.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:39.668Z,1528892139.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:40.056Z,1528892140.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:40.474Z,1528892140.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:40.852Z,1528892140.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:41.278Z,1528892141.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:41.675Z,1528892141.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:42.077Z,1528892142.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:42.448Z,1528892142.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:42.856Z,1528892142.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:43.272Z,1528892143.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:43.654Z,1528892143.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:44.056Z,1528892144.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:44.467Z,1528892144.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:44.867Z,1528892144.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:45.264Z,1528892145.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:45.659Z,1528892145.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:46.056Z,1528892146.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:46.457Z,1528892146.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:46.858Z,1528892146.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:47.261Z,1528892147.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:47.663Z,1528892147.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:48.071Z,1528892148.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:48.456Z,1528892148.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:48.859Z,1528892148.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:49.259Z,1528892149.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:49.656Z,1528892149.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:50.060Z,1528892150.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:50.467Z,1528892150.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:50.868Z,1528892150.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:51.268Z,1528892151.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:51.659Z,1528892151.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:52.056Z,1528892152.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:52.455Z,1528892152.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:52.863Z,1528892152.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:53.266Z,1528892153.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:53.672Z,1528892153.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:54.073Z,1528892154.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:54.456Z,1528892154.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:54.861Z,1528892154.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:55.264Z,1528892155.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:55.656Z,1528892155.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:56.060Z,1528892156.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:56.469Z,1528892156.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:56.876Z,1528892156.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:57.268Z,1528892157.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:57.675Z,1528892157.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:58.059Z,1528892158.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:58.465Z,1528892158.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:58.865Z,1528892158.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:59.276Z,1528892159.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:15:59.673Z,1528892159.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:00.072Z,1528892160.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:00.458Z,1528892160.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:00.858Z,1528892160.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:01.260Z,1528892161.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:01.669Z,1528892161.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:02.067Z,1528892162.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:02.477Z,1528892162.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:02.871Z,1528892162.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:03.275Z,1528892163.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:03.675Z,1528892163.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:04.052Z,1528892164.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:04.473Z,1528892164.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:04.857Z,1528892164.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:05.263Z,1528892165.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:05.687Z,1528892165.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:06.067Z,1528892166.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:06.467Z,1528892166.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:06.858Z,1528892166.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:07.259Z,1528892167.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:07.656Z,1528892167.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:08.064Z,1528892168.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:08.468Z,1528892168.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:08.868Z,1528892168.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:09.264Z,1528892169.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:09.660Z,1528892169.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:10.056Z,1528892170.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:10.457Z,1528892170.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:10.857Z,1528892170.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:11.271Z,1528892171.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:11.666Z,1528892171.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:12.068Z,1528892172.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:12.455Z,1528892172.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:12.857Z,1528892172.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:13.259Z,1528892173.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:13.655Z,1528892173.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:14.058Z,1528892174.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:14.467Z,1528892174.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:14.863Z,1528892174.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:15.264Z,1528892175.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:15.657Z,1528892175.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:16.058Z,1528892176.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:16.457Z,1528892176.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:16.857Z,1528892176.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:17.267Z,1528892177.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:17.666Z,1528892177.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:18.068Z,1528892178.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:18.455Z,1528892178.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:18.858Z,1528892178.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:19.257Z,1528892179.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:19.655Z,1528892179.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:20.057Z,1528892180.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:20.467Z,1528892180.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:20.863Z,1528892180.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:21.263Z,1528892181.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:21.658Z,1528892181.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:22.065Z,1528892182.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:22.457Z,1528892182.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:22.859Z,1528892182.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:23.267Z,1528892183.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:23.667Z,1528892183.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:24.068Z,1528892184.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:24.458Z,1528892184.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:24.857Z,1528892184.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:25.267Z,1528892185.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:25.667Z,1528892185.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:26.063Z,1528892186.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:26.458Z,1528892186.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:26.858Z,1528892186.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:27.263Z,1528892187.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:27.666Z,1528892187.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:28.063Z,1528892188.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:28.457Z,1528892188.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:28.857Z,1528892188.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:29.263Z,1528892189.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:29.672Z,1528892189.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:30.066Z,1528892190.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:30.459Z,1528892190.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:30.857Z,1528892190.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:31.272Z,1528892191.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:31.667Z,1528892191.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:32.071Z,1528892192.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:32.461Z,1528892192.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:32.860Z,1528892192.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:33.271Z,1528892193.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:33.697Z,1528892193.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:34.071Z,1528892194.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:34.468Z,1528892194.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:34.864Z,1528892194.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:35.267Z,1528892195.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:35.690Z,1528892195.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:36.071Z,1528892196.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:39.164Z,1528892199.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:39.340Z,1528892199.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:39.743Z,1528892199.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:40.119Z,1528892200.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:40.519Z,1528892200.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:40.911Z,1528892200.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:41.310Z,1528892201.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:41.710Z,1528892201.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:42.111Z,1528892202.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:42.517Z,1528892202.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:42.919Z,1528892202.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:43.324Z,1528892203.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:43.710Z,1528892203.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:44.109Z,1528892204.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:44.518Z,1528892204.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:44.916Z,1528892204.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:45.319Z,1528892205.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:45.719Z,1528892205.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:46.119Z,1528892206.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:46.507Z,1528892206.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:46.912Z,1528892206.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:47.316Z,1528892207.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:47.712Z,1528892207.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:48.112Z,1528892208.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:48.520Z,1528892208.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:48.919Z,1528892208.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:49.320Z,1528892209.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:49.707Z,1528892209.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:50.114Z,1528892210.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:50.524Z,1528892210.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:50.907Z,1528892210.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:51.316Z,1528892211.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:51.724Z,1528892211.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:52.128Z,1528892212.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:52.526Z,1528892212.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:52.912Z,1528892212.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:53.311Z,1528892213.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:53.713Z,1528892213.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:54.125Z,1528892214.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:54.521Z,1528892214.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:54.925Z,1528892214.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:55.320Z,1528892215.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:55.716Z,1528892215.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:56.112Z,1528892216.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:56.516Z,1528892216.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:56.909Z,1528892216.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:57.319Z,1528892217.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:57.728Z,1528892217.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:58.117Z,1528892218.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:58.512Z,1528892218.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:58.916Z,1528892218.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:59.324Z,1528892219.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:16:59.724Z,1528892219.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:00.120Z,1528892220.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:00.510Z,1528892220.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:00.912Z,1528892220.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:01.312Z,1528892221.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:01.711Z,1528892221.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:02.112Z,1528892222.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:02.521Z,1528892222.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:02.925Z,1528892222.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:03.324Z,1528892223.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:03.726Z,1528892223.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:04.110Z,1528892224.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:04.511Z,1528892224.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:04.916Z,1528892224.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:05.321Z,1528892225.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:05.732Z,1528892225.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:06.125Z,1528892226.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:06.509Z,1528892226.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:06.904Z,1528892226.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:07.347Z,1528892227.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:07.724Z,1528892227.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:08.124Z,1528892228.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:08.520Z,1528892228.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:08.909Z,1528892228.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:09.323Z,1528892229.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:09.736Z,1528892229.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:10.123Z,1528892230.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:10.514Z,1528892230.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:10.910Z,1528892230.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:11.332Z,1528892231.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:11.732Z,1528892231.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:12.134Z,1528892232.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:12.509Z,1528892232.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:12.907Z,1528892232.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:13.335Z,1528892233.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:13.731Z,1528892233.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:14.135Z,1528892234.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:14.508Z,1528892234.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:14.906Z,1528892234.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:15.335Z,1528892235.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:15.719Z,1528892235.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:16.115Z,1528892236.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:16.507Z,1528892236.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:16.911Z,1528892236.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:17.320Z,1528892237.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:17.719Z,1528892237.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:18.123Z,1528892238.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:18.513Z,1528892238.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:18.912Z,1528892238.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:19.320Z,1528892239.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:19.720Z,1528892239.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:20.120Z,1528892240.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:20.513Z,1528892240.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:20.909Z,1528892240.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:21.320Z,1528892241.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:21.720Z,1528892241.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:22.116Z,1528892242.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:22.511Z,1528892242.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:22.925Z,1528892242.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:23.321Z,1528892243.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:23.720Z,1528892243.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:24.121Z,1528892244.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:24.508Z,1528892244.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:24.914Z,1528892244.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:25.328Z,1528892245.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:25.719Z,1528892245.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:26.119Z,1528892246.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:26.512Z,1528892246.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:26.910Z,1528892246.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:27.320Z,1528892247.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:27.722Z,1528892247.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:28.118Z,1528892248.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:28.513Z,1528892248.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:28.913Z,1528892248.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:29.321Z,1528892249.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:29.720Z,1528892249.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:30.128Z,1528892250.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:30.514Z,1528892250.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:30.921Z,1528892250.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:31.332Z,1528892251.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:31.723Z,1528892251.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:32.132Z,1528892252.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:32.528Z,1528892252.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:32.920Z,1528892252.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:33.332Z,1528892253.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:33.731Z,1528892253.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:34.122Z,1528892254.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:34.517Z,1528892254.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:34.915Z,1528892254.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:35.325Z,1528892255.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:35.732Z,1528892255.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:36.136Z,1528892256.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:39.218Z,1528892259.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:39.373Z,1528892259.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:39.771Z,1528892259.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:40.166Z,1528892260.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:40.572Z,1528892260.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:40.961Z,1528892260.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:41.340Z,1528892261.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:41.748Z,1528892261.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:42.149Z,1528892262.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:42.556Z,1528892262.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:42.958Z,1528892262.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:43.359Z,1528892263.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:43.748Z,1528892263.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:44.156Z,1528892264.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:44.566Z,1528892264.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:44.948Z,1528892264.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:45.356Z,1528892265.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:45.759Z,1528892265.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:46.155Z,1528892266.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:46.551Z,1528892266.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:46.952Z,1528892266.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:47.356Z,1528892267.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:47.759Z,1528892267.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:48.159Z,1528892268.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:48.547Z,1528892268.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:48.951Z,1528892268.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:49.360Z,1528892269.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:49.760Z,1528892269.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:50.160Z,1528892270.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:50.554Z,1528892270.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:50.948Z,1528892270.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:51.361Z,1528892271.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:51.765Z,1528892271.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:52.160Z,1528892272.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:52.552Z,1528892272.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:52.961Z,1528892272.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:53.361Z,1528892273.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:53.771Z,1528892273.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:54.176Z,1528892274.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:54.554Z,1528892274.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:54.952Z,1528892274.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:55.366Z,1528892275.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:55.760Z,1528892275.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:56.168Z,1528892276.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:56.569Z,1528892276.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:56.956Z,1528892276.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:57.361Z,1528892277.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:57.769Z,1528892277.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:58.159Z,1528892278.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:58.560Z,1528892278.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:58.964Z,1528892278.964 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:58.964Z,1528892278.964 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 177
2018-06-13T12:17:58.964Z,1528892278.964 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:17:58.966Z,1528892278.966 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:58.966Z,1528892278.966 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 177
2018-06-13T12:17:58.966Z,1528892278.966 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:17:58.968Z,1528892278.968 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:17:58.968Z,1528892278.968 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 177
2018-06-13T12:17:58.968Z,1528892278.968 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:17:59.049Z,1528892279.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:17:59.049Z,1528892279.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:17:59.050Z,1528892279.050 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:17:59.441Z,1528892279.441 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:17:59.441Z,1528892279.441 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 177
2018-06-13T12:17:59.442Z,1528892279.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:17:59.442Z,1528892279.442 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 177
2018-06-13T12:17:59.442Z,1528892279.442 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:17:59.442Z,1528892279.442 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 177
2018-06-13T12:17:59.765Z,1528892279.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:17:59.765Z,1528892279.765 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:17:59.766Z,1528892279.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:17:59.766Z,1528892279.766 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:17:59.767Z,1528892279.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:17:59.767Z,1528892279.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:17:59.767Z,1528892279.767 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:17:59.768Z,1528892279.768 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:17:59.768Z,1528892279.768 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:18:00.179Z,1528892280.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:18:00.180Z,1528892280.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:00.551Z,1528892280.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:18:00.552Z,1528892280.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:00.950Z,1528892280.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:18:00.951Z,1528892280.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:01.364Z,1528892281.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:18:01.381Z,1528892281.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:01.759Z,1528892281.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:18:01.760Z,1528892281.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:02.156Z,1528892282.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:18:02.157Z,1528892282.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:02.566Z,1528892282.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:18:02.567Z,1528892282.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:02.955Z,1528892282.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:18:02.956Z,1528892282.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:03.368Z,1528892283.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T12:18:03.369Z,1528892283.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:03.765Z,1528892283.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:18:03.766Z,1528892283.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:04.158Z,1528892284.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:18:04.159Z,1528892284.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:04.552Z,1528892284.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:18:04.553Z,1528892284.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:04.952Z,1528892284.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:18:04.954Z,1528892284.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:05.348Z,1528892285.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T12:18:05.349Z,1528892285.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:05.761Z,1528892285.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T12:18:05.762Z,1528892285.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:06.165Z,1528892286.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T12:18:06.166Z,1528892286.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:06.567Z,1528892286.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:18:06.568Z,1528892286.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:06.951Z,1528892286.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:18:06.952Z,1528892286.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:07.351Z,1528892287.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T12:18:07.352Z,1528892287.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:07.747Z,1528892287.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:18:07.748Z,1528892287.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:08.151Z,1528892288.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:18:08.152Z,1528892288.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:08.560Z,1528892288.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:18:08.561Z,1528892288.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:08.968Z,1528892288.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:18:08.969Z,1528892288.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:09.364Z,1528892289.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:18:09.365Z,1528892289.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:09.755Z,1528892289.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:18:09.756Z,1528892289.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:10.152Z,1528892290.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:18:10.153Z,1528892290.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:10.560Z,1528892290.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:18:10.565Z,1528892290.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:10.966Z,1528892290.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:18:10.967Z,1528892290.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:11.358Z,1528892291.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:18:11.359Z,1528892291.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:11.762Z,1528892291.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:18:11.763Z,1528892291.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:12.172Z,1528892292.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:18:12.177Z,1528892292.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:12.568Z,1528892292.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:18:12.569Z,1528892292.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:12.940Z,1528892292.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:18:12.954Z,1528892292.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:13.362Z,1528892293.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:18:13.363Z,1528892293.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:13.745Z,1528892293.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T12:18:13.746Z,1528892293.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:14.152Z,1528892294.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:18:14.169Z,1528892294.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:14.576Z,1528892294.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:18:14.581Z,1528892294.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:14.980Z,1528892294.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:18:14.985Z,1528892294.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:15.356Z,1528892295.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:18:15.357Z,1528892295.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:15.752Z,1528892295.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:18:15.753Z,1528892295.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:16.148Z,1528892296.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:18:16.149Z,1528892296.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:16.552Z,1528892296.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:18:16.554Z,1528892296.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:16.951Z,1528892296.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:18:16.951Z,1528892296.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:17.348Z,1528892297.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:18:17.349Z,1528892297.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:17.754Z,1528892297.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:18:17.755Z,1528892297.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:18.154Z,1528892298.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:18:18.155Z,1528892298.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:18.560Z,1528892298.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:18:18.561Z,1528892298.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:18.951Z,1528892298.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T12:18:18.952Z,1528892298.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:19.350Z,1528892299.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:19.756Z,1528892299.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:20.153Z,1528892300.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:20.560Z,1528892300.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:20.964Z,1528892300.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:21.364Z,1528892301.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:21.751Z,1528892301.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:22.149Z,1528892302.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:22.552Z,1528892302.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:22.952Z,1528892302.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:23.356Z,1528892303.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:23.760Z,1528892303.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:24.161Z,1528892304.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:24.556Z,1528892304.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:24.966Z,1528892304.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:25.359Z,1528892305.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:25.749Z,1528892305.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:26.150Z,1528892306.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:26.564Z,1528892306.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:26.961Z,1528892306.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:27.360Z,1528892307.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:27.751Z,1528892307.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:28.148Z,1528892308.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:28.550Z,1528892308.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:28.964Z,1528892308.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:29.360Z,1528892309.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:29.765Z,1528892309.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:30.166Z,1528892310.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:30.559Z,1528892310.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:30.960Z,1528892310.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:31.344Z,1528892311.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:31.772Z,1528892311.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:32.165Z,1528892312.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:32.570Z,1528892312.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:35.676Z,1528892315.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:35.859Z,1528892315.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:36.216Z,1528892316.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:36.618Z,1528892316.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:37.012Z,1528892317.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:37.426Z,1528892317.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:37.832Z,1528892317.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:38.222Z,1528892318.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:38.616Z,1528892318.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:39.020Z,1528892319.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:39.422Z,1528892319.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:39.827Z,1528892319.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:40.232Z,1528892320.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:40.623Z,1528892320.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:41.020Z,1528892321.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:41.432Z,1528892321.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:41.832Z,1528892321.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:42.232Z,1528892322.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:42.614Z,1528892322.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:43.022Z,1528892323.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:43.415Z,1528892323.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:43.832Z,1528892323.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:44.232Z,1528892324.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:44.628Z,1528892324.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:45.015Z,1528892325.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:45.414Z,1528892325.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:45.817Z,1528892325.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:46.214Z,1528892326.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:46.628Z,1528892326.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:47.029Z,1528892327.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:47.432Z,1528892327.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:47.817Z,1528892327.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:48.216Z,1528892328.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:48.614Z,1528892328.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:49.023Z,1528892329.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:49.416Z,1528892329.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:49.822Z,1528892329.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:50.230Z,1528892330.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:50.627Z,1528892330.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:51.013Z,1528892331.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:51.415Z,1528892331.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:51.815Z,1528892331.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:52.220Z,1528892332.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:52.622Z,1528892332.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:53.032Z,1528892333.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:53.422Z,1528892333.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:53.820Z,1528892333.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:54.216Z,1528892334.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:54.613Z,1528892334.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:55.014Z,1528892335.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:55.415Z,1528892335.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:55.832Z,1528892335.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:56.303Z,1528892336.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:56.632Z,1528892336.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:57.015Z,1528892337.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:57.420Z,1528892337.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:57.820Z,1528892337.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:58.214Z,1528892338.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:58.622Z,1528892338.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:59.032Z,1528892339.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:59.423Z,1528892339.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:18:59.820Z,1528892339.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:00.220Z,1528892340.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:00.620Z,1528892340.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:01.016Z,1528892341.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:01.417Z,1528892341.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:01.828Z,1528892341.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:02.232Z,1528892342.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:02.628Z,1528892342.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:03.019Z,1528892343.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:03.420Z,1528892343.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:03.818Z,1528892343.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:04.213Z,1528892344.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:04.622Z,1528892344.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:05.032Z,1528892345.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:05.422Z,1528892345.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:05.814Z,1528892345.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:06.217Z,1528892346.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:06.621Z,1528892346.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:07.023Z,1528892347.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:07.428Z,1528892347.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:07.825Z,1528892347.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:08.226Z,1528892348.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:08.631Z,1528892348.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:09.021Z,1528892349.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:09.421Z,1528892349.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:09.806Z,1528892349.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:10.209Z,1528892350.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:10.635Z,1528892350.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:11.034Z,1528892351.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:11.431Z,1528892351.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:11.808Z,1528892351.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:12.209Z,1528892352.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:12.604Z,1528892352.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:13.008Z,1528892353.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:13.410Z,1528892353.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:13.815Z,1528892353.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:14.235Z,1528892354.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:14.620Z,1528892354.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:15.006Z,1528892355.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:15.409Z,1528892355.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:15.812Z,1528892355.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:16.209Z,1528892356.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:16.616Z,1528892356.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:17.019Z,1528892357.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:17.416Z,1528892357.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:17.810Z,1528892357.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:18.212Z,1528892358.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:18.608Z,1528892358.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:19.011Z,1528892359.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:19.412Z,1528892359.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:19.820Z,1528892359.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:20.219Z,1528892360.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:20.620Z,1528892360.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:21.020Z,1528892361.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:21.416Z,1528892361.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:21.826Z,1528892361.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:22.211Z,1528892362.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:22.624Z,1528892362.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:23.024Z,1528892363.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:23.416Z,1528892363.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:23.816Z,1528892363.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:24.214Z,1528892364.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:24.609Z,1528892364.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:25.020Z,1528892365.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:25.413Z,1528892365.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:25.816Z,1528892365.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:26.220Z,1528892366.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:26.625Z,1528892366.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:27.010Z,1528892367.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:27.412Z,1528892367.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:27.814Z,1528892367.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:28.214Z,1528892368.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:28.620Z,1528892368.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:29.020Z,1528892369.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:29.416Z,1528892369.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:29.812Z,1528892369.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:30.212Z,1528892370.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:30.616Z,1528892370.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:31.019Z,1528892371.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:31.415Z,1528892371.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:31.817Z,1528892371.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:32.223Z,1528892372.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:32.226Z,1528892372.226 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T12:19:32.227Z,1528892372.227 [Default:CheckIn:C.Wait] Stopped
2018-06-13T12:19:32.227Z,1528892372.227 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T12:19:32.227Z,1528892372.227 [Default:CheckIn:D] Running Loop=1
2018-06-13T12:19:32.628Z,1528892372.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:32.631Z,1528892372.631 [Default:CheckIn:D] Stopped
2018-06-13T12:19:32.631Z,1528892372.631 [Default:CheckIn:E] Running Loop=1
2018-06-13T12:19:35.715Z,1528892375.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:35.718Z,1528892375.718 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 532.319759 min 
2018-06-13T12:19:35.718Z,1528892375.718 [Default:CheckIn:E] Stopped
2018-06-13T12:19:35.718Z,1528892375.718 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T12:19:35.718Z,1528892375.718 [Default:CheckIn] Stopped
2018-06-13T12:19:35.719Z,1528892375.719 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T12:19:35.719Z,1528892375.719 [Default:CheckIn](INFO): Running loop #52
2018-06-13T12:19:35.719Z,1528892375.719 [Default:CheckIn] Running Loop=52
2018-06-13T12:19:35.719Z,1528892375.719 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T12:19:35.719Z,1528892375.719 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T12:19:35.866Z,1528892375.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:36.275Z,1528892376.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:36.679Z,1528892376.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:37.055Z,1528892377.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:37.452Z,1528892377.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:37.851Z,1528892377.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:38.251Z,1528892378.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:38.660Z,1528892378.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:39.059Z,1528892379.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:39.455Z,1528892379.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:39.860Z,1528892379.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:40.248Z,1528892380.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:40.653Z,1528892380.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:41.053Z,1528892381.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:41.447Z,1528892381.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:41.857Z,1528892381.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:42.259Z,1528892382.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:42.680Z,1528892382.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:43.050Z,1528892383.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:43.451Z,1528892383.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:43.847Z,1528892383.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:44.250Z,1528892384.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:44.656Z,1528892384.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:45.055Z,1528892385.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:45.455Z,1528892385.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:45.852Z,1528892385.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:46.250Z,1528892386.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:46.651Z,1528892386.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:47.052Z,1528892387.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:47.452Z,1528892387.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:47.855Z,1528892387.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:48.264Z,1528892388.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:48.655Z,1528892388.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:49.050Z,1528892389.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:49.453Z,1528892389.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:49.847Z,1528892389.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:50.257Z,1528892390.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:50.661Z,1528892390.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:51.064Z,1528892391.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:51.464Z,1528892391.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:51.860Z,1528892391.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:52.248Z,1528892392.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:52.656Z,1528892392.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:53.060Z,1528892393.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:53.447Z,1528892393.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:53.859Z,1528892393.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:54.268Z,1528892394.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:54.657Z,1528892394.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:55.052Z,1528892395.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:55.456Z,1528892395.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:55.849Z,1528892395.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:56.252Z,1528892396.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:56.672Z,1528892396.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:57.061Z,1528892397.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:57.461Z,1528892397.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:57.852Z,1528892397.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:58.253Z,1528892398.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:58.652Z,1528892398.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:59.066Z,1528892399.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:59.456Z,1528892399.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:19:59.861Z,1528892399.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:00.266Z,1528892400.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:00.657Z,1528892400.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:01.056Z,1528892401.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:01.460Z,1528892401.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:01.856Z,1528892401.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:02.256Z,1528892402.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:02.672Z,1528892402.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:03.062Z,1528892403.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:03.464Z,1528892403.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:03.868Z,1528892403.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:04.250Z,1528892404.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:04.660Z,1528892404.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:05.063Z,1528892405.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:05.453Z,1528892405.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:05.867Z,1528892405.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:06.267Z,1528892406.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:06.664Z,1528892406.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:07.053Z,1528892407.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:07.457Z,1528892407.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:07.855Z,1528892407.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:08.252Z,1528892408.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:08.667Z,1528892408.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:09.060Z,1528892409.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:09.461Z,1528892409.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:09.862Z,1528892409.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:10.254Z,1528892410.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:10.653Z,1528892410.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:11.056Z,1528892411.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:11.452Z,1528892411.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:11.862Z,1528892411.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:12.266Z,1528892412.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:12.668Z,1528892412.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:13.059Z,1528892413.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:13.456Z,1528892413.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:13.853Z,1528892413.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:14.252Z,1528892414.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:14.663Z,1528892414.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:15.060Z,1528892415.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:15.462Z,1528892415.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:15.856Z,1528892415.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:16.252Z,1528892416.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:16.654Z,1528892416.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:17.057Z,1528892417.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:17.455Z,1528892417.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:17.866Z,1528892417.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:18.267Z,1528892418.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:18.660Z,1528892418.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:19.059Z,1528892419.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:19.459Z,1528892419.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:19.858Z,1528892419.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:20.260Z,1528892420.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:20.667Z,1528892420.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:21.068Z,1528892421.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:21.463Z,1528892421.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:21.860Z,1528892421.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:22.250Z,1528892422.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:22.664Z,1528892422.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:23.069Z,1528892423.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:23.444Z,1528892423.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:23.868Z,1528892423.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:24.267Z,1528892424.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:24.672Z,1528892424.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:25.041Z,1528892425.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:25.444Z,1528892425.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:25.848Z,1528892425.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:26.257Z,1528892426.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:26.675Z,1528892426.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:27.072Z,1528892427.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:27.468Z,1528892427.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:27.848Z,1528892427.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:28.265Z,1528892428.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:28.648Z,1528892428.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:29.049Z,1528892429.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:29.451Z,1528892429.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:29.876Z,1528892429.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:30.282Z,1528892430.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:30.651Z,1528892430.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:31.053Z,1528892431.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:31.447Z,1528892431.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:31.848Z,1528892431.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:32.246Z,1528892432.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:32.678Z,1528892432.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:35.774Z,1528892435.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:35.910Z,1528892435.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:36.304Z,1528892436.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:36.700Z,1528892436.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:37.108Z,1528892437.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:37.499Z,1528892437.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:37.911Z,1528892437.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:38.311Z,1528892438.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:38.709Z,1528892438.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:39.100Z,1528892439.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:39.499Z,1528892439.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:39.900Z,1528892439.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:40.299Z,1528892440.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:40.711Z,1528892440.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:41.111Z,1528892441.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:41.511Z,1528892441.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:41.900Z,1528892441.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:42.299Z,1528892442.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:42.700Z,1528892442.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:43.102Z,1528892443.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:43.502Z,1528892443.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:43.912Z,1528892443.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:44.310Z,1528892444.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:44.734Z,1528892444.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:45.102Z,1528892445.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:45.508Z,1528892445.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:45.924Z,1528892445.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:46.302Z,1528892446.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:46.707Z,1528892446.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:47.110Z,1528892447.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:47.511Z,1528892447.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:47.908Z,1528892447.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:48.303Z,1528892448.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:48.708Z,1528892448.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:49.102Z,1528892449.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:49.499Z,1528892449.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:49.908Z,1528892449.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:50.333Z,1528892450.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:50.712Z,1528892450.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:51.101Z,1528892451.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:51.502Z,1528892451.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:51.908Z,1528892451.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:52.302Z,1528892452.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:52.707Z,1528892452.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:53.106Z,1528892453.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:53.532Z,1528892453.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:53.904Z,1528892453.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:54.303Z,1528892454.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:54.708Z,1528892454.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:55.108Z,1528892455.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:55.504Z,1528892455.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:55.911Z,1528892455.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:56.330Z,1528892456.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:56.715Z,1528892456.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:57.101Z,1528892457.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:57.504Z,1528892457.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:57.906Z,1528892457.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:58.304Z,1528892458.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:58.707Z,1528892458.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:59.111Z,1528892459.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:59.507Z,1528892459.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:59.903Z,1528892459.903 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:59.904Z,1528892459.904 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 178
2018-06-13T12:20:59.904Z,1528892459.904 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:20:59.906Z,1528892459.906 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:59.906Z,1528892459.906 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 178
2018-06-13T12:20:59.906Z,1528892459.906 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:20:59.907Z,1528892459.907 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:20:59.907Z,1528892459.907 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 178
2018-06-13T12:20:59.908Z,1528892459.908 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:20:59.985Z,1528892459.985 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:20:59.985Z,1528892459.985 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:20:59.986Z,1528892459.986 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:21:00.385Z,1528892460.385 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:21:00.385Z,1528892460.385 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 178
2018-06-13T12:21:00.385Z,1528892460.385 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:21:00.385Z,1528892460.385 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 178
2018-06-13T12:21:00.386Z,1528892460.386 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:21:00.386Z,1528892460.386 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 178
2018-06-13T12:21:00.701Z,1528892460.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:21:00.702Z,1528892460.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:21:00.702Z,1528892460.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:21:00.703Z,1528892460.703 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:21:00.703Z,1528892460.703 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:21:00.703Z,1528892460.703 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:21:00.704Z,1528892460.704 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:21:00.704Z,1528892460.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:21:00.704Z,1528892460.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:21:01.108Z,1528892461.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:21:01.109Z,1528892461.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:01.509Z,1528892461.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:21:01.510Z,1528892461.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:01.923Z,1528892461.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:21:01.924Z,1528892461.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:02.320Z,1528892462.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:21:02.321Z,1528892462.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:02.723Z,1528892462.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:21:02.724Z,1528892462.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:03.106Z,1528892463.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:21:03.107Z,1528892463.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:03.512Z,1528892463.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:21:03.513Z,1528892463.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:03.916Z,1528892463.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:21:03.917Z,1528892463.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:04.304Z,1528892464.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T12:21:04.305Z,1528892464.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:04.724Z,1528892464.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:21:04.725Z,1528892464.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:05.121Z,1528892465.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:21:05.122Z,1528892465.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:05.513Z,1528892465.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:21:05.514Z,1528892465.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:05.908Z,1528892465.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:21:05.909Z,1528892465.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:06.310Z,1528892466.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T12:21:06.311Z,1528892466.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:06.704Z,1528892466.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T12:21:06.706Z,1528892466.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:07.107Z,1528892467.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T12:21:07.108Z,1528892467.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:07.507Z,1528892467.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:21:07.508Z,1528892467.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:07.917Z,1528892467.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:21:07.918Z,1528892467.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:08.324Z,1528892468.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T12:21:08.325Z,1528892468.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:08.720Z,1528892468.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:21:08.721Z,1528892468.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:09.100Z,1528892469.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:21:09.101Z,1528892469.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:09.505Z,1528892469.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:21:09.506Z,1528892469.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:09.908Z,1528892469.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:21:09.909Z,1528892469.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:10.303Z,1528892470.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:21:10.304Z,1528892470.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:10.716Z,1528892470.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:21:10.718Z,1528892470.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:11.130Z,1528892471.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:21:11.130Z,1528892471.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:11.512Z,1528892471.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:21:11.513Z,1528892471.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:11.916Z,1528892471.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:21:11.916Z,1528892471.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:12.311Z,1528892472.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:21:12.312Z,1528892472.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:12.704Z,1528892472.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:21:12.705Z,1528892472.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:13.106Z,1528892473.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:21:13.107Z,1528892473.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:13.510Z,1528892473.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:21:13.511Z,1528892473.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:13.917Z,1528892473.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:21:13.918Z,1528892473.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:14.319Z,1528892474.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:21:14.320Z,1528892474.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:14.718Z,1528892474.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T12:21:14.719Z,1528892474.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:15.107Z,1528892475.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:21:15.108Z,1528892475.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:15.507Z,1528892475.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:21:15.508Z,1528892475.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:15.916Z,1528892475.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:21:15.917Z,1528892475.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:16.312Z,1528892476.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:21:16.312Z,1528892476.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:16.718Z,1528892476.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:21:16.719Z,1528892476.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:17.136Z,1528892477.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:21:17.137Z,1528892477.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:17.512Z,1528892477.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:21:17.529Z,1528892477.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:17.912Z,1528892477.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:21:17.929Z,1528892477.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:18.306Z,1528892478.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:21:18.307Z,1528892478.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:18.716Z,1528892478.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:21:18.737Z,1528892478.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:19.113Z,1528892479.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:21:19.114Z,1528892479.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:19.540Z,1528892479.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:21:19.541Z,1528892479.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:19.907Z,1528892479.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:20.306Z,1528892480.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:20.714Z,1528892480.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:21.113Z,1528892481.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:21.516Z,1528892481.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:21.909Z,1528892481.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:22.324Z,1528892482.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:22.739Z,1528892482.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:23.116Z,1528892483.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:23.512Z,1528892483.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:23.924Z,1528892483.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:24.338Z,1528892484.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:24.715Z,1528892484.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:25.116Z,1528892485.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:25.526Z,1528892485.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:25.916Z,1528892485.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:26.310Z,1528892486.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:26.724Z,1528892486.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:27.119Z,1528892487.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:27.516Z,1528892487.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:27.909Z,1528892487.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:28.313Z,1528892488.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:28.737Z,1528892488.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:29.143Z,1528892489.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:29.524Z,1528892489.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:29.906Z,1528892489.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:30.324Z,1528892490.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:30.720Z,1528892490.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:31.120Z,1528892491.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:31.532Z,1528892491.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:31.918Z,1528892491.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:32.311Z,1528892492.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:32.719Z,1528892492.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:33.124Z,1528892493.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:33.537Z,1528892493.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:33.920Z,1528892493.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:34.307Z,1528892494.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:34.716Z,1528892494.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:35.140Z,1528892495.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:35.520Z,1528892495.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:35.912Z,1528892495.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:36.312Z,1528892496.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:39.416Z,1528892499.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:39.595Z,1528892499.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:39.971Z,1528892499.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:40.368Z,1528892500.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:40.763Z,1528892500.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:41.163Z,1528892501.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:41.564Z,1528892501.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:41.968Z,1528892501.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:42.371Z,1528892502.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:42.770Z,1528892502.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:43.165Z,1528892503.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:43.567Z,1528892503.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:43.963Z,1528892503.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:44.368Z,1528892504.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:44.771Z,1528892504.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:45.171Z,1528892505.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:45.572Z,1528892505.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:45.976Z,1528892505.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:46.370Z,1528892506.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:46.769Z,1528892506.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:47.176Z,1528892507.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:47.566Z,1528892507.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:47.975Z,1528892507.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:48.379Z,1528892508.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:48.775Z,1528892508.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:49.166Z,1528892509.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:49.579Z,1528892509.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:49.968Z,1528892509.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:50.372Z,1528892510.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:50.780Z,1528892510.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:51.177Z,1528892511.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:51.577Z,1528892511.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:51.971Z,1528892511.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:52.364Z,1528892512.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:52.772Z,1528892512.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:53.171Z,1528892513.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:53.570Z,1528892513.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:53.977Z,1528892513.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:54.393Z,1528892514.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:54.773Z,1528892514.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:55.163Z,1528892515.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:55.582Z,1528892515.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:55.978Z,1528892515.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:56.362Z,1528892516.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:56.785Z,1528892516.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:57.187Z,1528892517.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:57.586Z,1528892517.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:57.964Z,1528892517.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:58.368Z,1528892518.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:58.789Z,1528892518.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:59.196Z,1528892519.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:59.590Z,1528892519.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:21:59.963Z,1528892519.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:00.385Z,1528892520.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:00.790Z,1528892520.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:01.185Z,1528892521.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:01.592Z,1528892521.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:01.962Z,1528892521.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:02.392Z,1528892522.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:02.796Z,1528892522.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:03.172Z,1528892523.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:03.571Z,1528892523.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:03.991Z,1528892523.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:04.389Z,1528892524.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:04.770Z,1528892524.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:05.172Z,1528892525.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:05.592Z,1528892525.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:05.975Z,1528892525.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.383007 seconds old.
2018-06-13T12:22:05.976Z,1528892525.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:05.993Z,1528892525.993 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.383131 seconds old.
2018-06-13T12:22:05.994Z,1528892525.994 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.399706 seconds old.
2018-06-13T12:22:06.371Z,1528892526.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.779002 seconds old.
2018-06-13T12:22:06.372Z,1528892526.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:06.373Z,1528892526.373 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.779119 seconds old.
2018-06-13T12:22:06.374Z,1528892526.374 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.779672 seconds old.
2018-06-13T12:22:06.770Z,1528892526.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.178167 seconds old.
2018-06-13T12:22:06.771Z,1528892526.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:06.772Z,1528892526.772 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.178274 seconds old.
2018-06-13T12:22:06.773Z,1528892526.773 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.178591 seconds old.
2018-06-13T12:22:07.175Z,1528892527.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.583022 seconds old.
2018-06-13T12:22:07.176Z,1528892527.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:07.177Z,1528892527.177 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.583130 seconds old.
2018-06-13T12:22:07.178Z,1528892527.178 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.583683 seconds old.
2018-06-13T12:22:07.574Z,1528892527.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.981853 seconds old.
2018-06-13T12:22:07.575Z,1528892527.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:07.575Z,1528892527.575 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.981961 seconds old.
2018-06-13T12:22:07.576Z,1528892527.576 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.982275 seconds old.
2018-06-13T12:22:07.966Z,1528892527.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.373967 seconds old.
2018-06-13T12:22:07.967Z,1528892527.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:07.967Z,1528892527.967 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.374081 seconds old.
2018-06-13T12:22:07.969Z,1528892527.969 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.374403 seconds old.
2018-06-13T12:22:08.369Z,1528892528.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.776800 seconds old.
2018-06-13T12:22:08.370Z,1528892528.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:08.371Z,1528892528.371 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.777138 seconds old.
2018-06-13T12:22:08.372Z,1528892528.372 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.777464 seconds old.
2018-06-13T12:22:08.779Z,1528892528.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.186843 seconds old.
2018-06-13T12:22:08.780Z,1528892528.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:08.780Z,1528892528.780 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.186931 seconds old.
2018-06-13T12:22:08.798Z,1528892528.798 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.203449 seconds old.
2018-06-13T12:22:09.178Z,1528892529.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.586423 seconds old.
2018-06-13T12:22:09.179Z,1528892529.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:09.180Z,1528892529.180 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.586535 seconds old.
2018-06-13T12:22:09.181Z,1528892529.181 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.587052 seconds old.
2018-06-13T12:22:09.575Z,1528892529.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.983106 seconds old.
2018-06-13T12:22:09.576Z,1528892529.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:09.577Z,1528892529.577 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.983211 seconds old.
2018-06-13T12:22:09.578Z,1528892529.578 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.983767 seconds old.
2018-06-13T12:22:09.984Z,1528892529.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.392238 seconds old.
2018-06-13T12:22:09.985Z,1528892529.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:09.986Z,1528892529.986 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.392602 seconds old.
2018-06-13T12:22:09.987Z,1528892529.987 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.392925 seconds old.
2018-06-13T12:22:10.374Z,1528892530.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.782398 seconds old.
2018-06-13T12:22:10.375Z,1528892530.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:10.376Z,1528892530.376 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.782500 seconds old.
2018-06-13T12:22:10.377Z,1528892530.377 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.783019 seconds old.
2018-06-13T12:22:10.781Z,1528892530.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:11.186Z,1528892531.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:11.580Z,1528892531.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:11.976Z,1528892531.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:12.382Z,1528892532.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:12.784Z,1528892532.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:13.188Z,1528892533.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:13.600Z,1528892533.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:13.984Z,1528892533.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:14.381Z,1528892534.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:14.798Z,1528892534.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:15.188Z,1528892535.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:15.588Z,1528892535.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:15.982Z,1528892535.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:16.364Z,1528892536.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:16.796Z,1528892536.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:17.192Z,1528892537.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:17.588Z,1528892537.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:17.964Z,1528892537.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:18.391Z,1528892538.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:18.792Z,1528892538.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:19.186Z,1528892539.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:19.594Z,1528892539.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:19.992Z,1528892539.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:20.363Z,1528892540.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:20.776Z,1528892540.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:21.175Z,1528892541.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:21.599Z,1528892541.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:21.965Z,1528892541.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:22.362Z,1528892542.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:22.796Z,1528892542.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:23.200Z,1528892543.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:23.595Z,1528892543.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:23.968Z,1528892543.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:24.370Z,1528892544.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:24.768Z,1528892544.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:25.178Z,1528892545.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:25.578Z,1528892545.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:25.969Z,1528892545.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:26.363Z,1528892546.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:26.784Z,1528892546.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:27.182Z,1528892547.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:27.578Z,1528892547.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:27.964Z,1528892547.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:28.361Z,1528892548.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:28.782Z,1528892548.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:29.181Z,1528892549.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:29.605Z,1528892549.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:29.963Z,1528892549.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:30.373Z,1528892550.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:30.780Z,1528892550.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:31.178Z,1528892551.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:31.576Z,1528892551.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:31.972Z,1528892551.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:32.382Z,1528892552.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:32.782Z,1528892552.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:35.881Z,1528892555.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:36.034Z,1528892556.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:36.435Z,1528892556.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:36.825Z,1528892556.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:37.226Z,1528892557.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:37.628Z,1528892557.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:38.029Z,1528892558.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:38.432Z,1528892558.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:38.830Z,1528892558.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:39.239Z,1528892559.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:39.627Z,1528892559.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:40.032Z,1528892560.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:40.423Z,1528892560.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:40.848Z,1528892560.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:41.245Z,1528892561.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:41.628Z,1528892561.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:42.033Z,1528892562.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:42.436Z,1528892562.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:42.831Z,1528892562.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:43.233Z,1528892563.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:43.640Z,1528892563.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:44.043Z,1528892564.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:44.412Z,1528892564.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:44.844Z,1528892564.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:45.237Z,1528892565.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:45.644Z,1528892565.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:46.043Z,1528892566.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:46.433Z,1528892566.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:46.841Z,1528892566.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:47.241Z,1528892567.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:47.640Z,1528892567.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:48.015Z,1528892568.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:48.415Z,1528892568.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:48.848Z,1528892568.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:49.241Z,1528892569.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:49.642Z,1528892569.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:50.016Z,1528892570.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:50.440Z,1528892570.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:50.847Z,1528892570.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:51.238Z,1528892571.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:51.640Z,1528892571.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:52.043Z,1528892572.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:52.417Z,1528892572.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:52.843Z,1528892572.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:53.250Z,1528892573.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:53.651Z,1528892573.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:54.018Z,1528892574.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:54.424Z,1528892574.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:54.828Z,1528892574.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:55.250Z,1528892575.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:55.654Z,1528892575.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:56.025Z,1528892576.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:56.422Z,1528892576.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:56.824Z,1528892576.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:57.249Z,1528892577.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:57.630Z,1528892577.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:58.023Z,1528892578.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:58.415Z,1528892578.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:58.823Z,1528892578.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:59.254Z,1528892579.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:22:59.630Z,1528892579.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:00.052Z,1528892580.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:00.419Z,1528892580.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:00.832Z,1528892580.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:01.228Z,1528892581.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:01.628Z,1528892581.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:02.015Z,1528892582.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:02.416Z,1528892582.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:02.832Z,1528892582.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:03.231Z,1528892583.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:03.624Z,1528892583.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:04.019Z,1528892584.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:04.415Z,1528892584.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:04.824Z,1528892584.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:05.230Z,1528892585.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:05.653Z,1528892585.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:06.029Z,1528892586.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:06.419Z,1528892586.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:06.825Z,1528892586.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:07.229Z,1528892587.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:07.635Z,1528892587.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:08.016Z,1528892588.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:08.418Z,1528892588.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:08.816Z,1528892588.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:09.170Z,1528892589.170 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T12:23:09.170Z,1528892589.171 [NAL9602] Data Fault, FailCount= 4
2018-06-13T12:23:09.171Z,1528892589.171 [NAL9602](ERROR): Data Fault
2018-06-13T12:23:09.266Z,1528892589.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:09.349Z,1528892589.349 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T12:23:09.574Z,1528892589.574 [NAL9602](INFO): Powering down
2018-06-13T12:23:09.637Z,1528892589.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:10.019Z,1528892590.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:10.416Z,1528892590.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:10.489Z,1528892590.489 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T12:23:10.489Z,1528892590.489 [NAL9602] No Fault, FailCount= 4
2018-06-13T12:23:10.817Z,1528892590.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:11.220Z,1528892591.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:11.612Z,1528892591.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:12.016Z,1528892592.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:12.415Z,1528892592.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:12.813Z,1528892592.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:13.215Z,1528892593.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:13.616Z,1528892593.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:14.011Z,1528892594.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:14.415Z,1528892594.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:14.817Z,1528892594.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:15.219Z,1528892595.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:15.615Z,1528892595.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:16.015Z,1528892596.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:16.415Z,1528892596.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:16.816Z,1528892596.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:17.220Z,1528892597.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:17.612Z,1528892597.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:18.015Z,1528892598.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:18.420Z,1528892598.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:18.811Z,1528892598.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:19.215Z,1528892599.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:19.618Z,1528892599.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:20.012Z,1528892600.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:20.416Z,1528892600.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:20.817Z,1528892600.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:21.211Z,1528892601.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:21.616Z,1528892601.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:22.016Z,1528892602.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:22.415Z,1528892602.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:22.814Z,1528892602.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:23.220Z,1528892603.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:23.612Z,1528892603.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:24.015Z,1528892604.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:24.418Z,1528892604.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:24.811Z,1528892604.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:25.215Z,1528892605.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:25.616Z,1528892605.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:26.011Z,1528892606.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:26.418Z,1528892606.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:26.816Z,1528892606.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:27.217Z,1528892607.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:27.615Z,1528892607.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:28.017Z,1528892608.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:28.415Z,1528892608.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:28.818Z,1528892608.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:29.218Z,1528892609.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:29.612Z,1528892609.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:30.020Z,1528892610.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:30.423Z,1528892610.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:30.812Z,1528892610.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:31.221Z,1528892611.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:31.617Z,1528892611.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:32.025Z,1528892612.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:32.417Z,1528892612.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:32.822Z,1528892612.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:33.217Z,1528892613.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:33.628Z,1528892613.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:33.996Z,1528892613.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:34.023Z,1528892614.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:37.095Z,1528892617.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:37.122Z,1528892617.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:37.235Z,1528892617.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:37.266Z,1528892617.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:37.635Z,1528892617.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:37.668Z,1528892617.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:38.031Z,1528892618.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:38.062Z,1528892618.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:38.430Z,1528892618.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:38.465Z,1528892618.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:38.827Z,1528892618.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:38.844Z,1528892618.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:39.234Z,1528892619.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:39.269Z,1528892619.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:39.613Z,1528892619.613 [NAL9602](INFO): Powering up NAL9602
2018-06-13T12:23:39.630Z,1528892619.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:39.653Z,1528892619.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:40.033Z,1528892620.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:40.051Z,1528892620.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:40.433Z,1528892620.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:40.451Z,1528892620.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:40.834Z,1528892620.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:40.852Z,1528892620.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:41.233Z,1528892621.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:41.256Z,1528892621.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:41.631Z,1528892621.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:41.649Z,1528892621.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:42.034Z,1528892622.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:42.051Z,1528892622.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:42.436Z,1528892622.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:42.453Z,1528892622.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:42.837Z,1528892622.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:42.855Z,1528892622.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:43.238Z,1528892623.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:43.260Z,1528892623.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:43.636Z,1528892623.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:43.653Z,1528892623.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:44.032Z,1528892624.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:44.050Z,1528892624.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:44.435Z,1528892624.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:44.457Z,1528892624.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:44.836Z,1528892624.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:44.854Z,1528892624.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:45.236Z,1528892625.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:45.254Z,1528892625.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:45.629Z,1528892625.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:45.662Z,1528892625.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:46.036Z,1528892626.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:46.054Z,1528892626.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:46.437Z,1528892626.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:46.455Z,1528892626.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:46.834Z,1528892626.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:46.859Z,1528892626.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:47.236Z,1528892627.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:47.253Z,1528892627.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:47.626Z,1528892627.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:47.664Z,1528892627.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:48.034Z,1528892628.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:48.058Z,1528892628.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:48.436Z,1528892628.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:48.454Z,1528892628.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:48.826Z,1528892628.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:48.856Z,1528892628.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:49.246Z,1528892629.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:49.351Z,1528892629.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:49.631Z,1528892629.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:49.659Z,1528892629.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:50.047Z,1528892630.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:50.066Z,1528892630.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:50.415Z,1528892630.415 [NAL9602](INFO): NAL9602 initialized
2018-06-13T12:23:50.432Z,1528892630.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:50.477Z,1528892630.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:50.831Z,1528892630.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:50.866Z,1528892630.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:51.240Z,1528892631.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:51.270Z,1528892631.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:51.653Z,1528892631.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:51.671Z,1528892631.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:52.046Z,1528892632.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:52.076Z,1528892632.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:52.431Z,1528892632.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:52.470Z,1528892632.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:52.831Z,1528892632.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:52.870Z,1528892632.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:53.231Z,1528892633.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:53.250Z,1528892633.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:53.646Z,1528892633.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:53.681Z,1528892633.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:54.045Z,1528892634.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T12:23:54.082Z,1528892634.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:54.484Z,1528892634.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:54.851Z,1528892634.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:55.252Z,1528892635.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:55.651Z,1528892635.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:56.051Z,1528892636.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:56.464Z,1528892636.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:56.863Z,1528892636.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:57.260Z,1528892637.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:57.655Z,1528892637.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:58.054Z,1528892638.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:58.451Z,1528892638.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:58.855Z,1528892638.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:59.255Z,1528892639.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:23:59.663Z,1528892639.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:00.063Z,1528892640.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:00.464Z,1528892640.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:00.851Z,1528892640.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:00.851Z,1528892640.851 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 179
2018-06-13T12:24:00.851Z,1528892640.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:24:00.853Z,1528892640.853 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:00.853Z,1528892640.853 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 179
2018-06-13T12:24:00.853Z,1528892640.853 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:24:00.855Z,1528892640.855 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:00.855Z,1528892640.855 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 179
2018-06-13T12:24:00.855Z,1528892640.855 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:24:00.929Z,1528892640.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:24:00.929Z,1528892640.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:24:00.930Z,1528892640.930 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:24:01.338Z,1528892641.338 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:24:01.338Z,1528892641.338 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 179
2018-06-13T12:24:01.339Z,1528892641.339 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:24:01.339Z,1528892641.339 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 179
2018-06-13T12:24:01.339Z,1528892641.339 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:24:01.339Z,1528892641.339 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 179
2018-06-13T12:24:01.655Z,1528892641.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:24:01.656Z,1528892641.656 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:24:01.656Z,1528892641.656 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:24:01.657Z,1528892641.657 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:24:01.657Z,1528892641.657 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:24:01.658Z,1528892641.658 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:24:01.658Z,1528892641.658 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:24:01.658Z,1528892641.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:24:01.659Z,1528892641.659 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:24:02.062Z,1528892642.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:24:02.063Z,1528892642.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:02.468Z,1528892642.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:24:02.469Z,1528892642.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:02.867Z,1528892642.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:24:02.868Z,1528892642.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:03.269Z,1528892643.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:24:03.270Z,1528892643.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:03.661Z,1528892643.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:24:03.662Z,1528892643.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:04.069Z,1528892644.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:24:04.070Z,1528892644.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:04.444Z,1528892644.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:24:04.445Z,1528892644.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:04.869Z,1528892644.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:24:04.870Z,1528892644.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:05.248Z,1528892645.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T12:24:05.265Z,1528892645.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:05.671Z,1528892645.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:24:05.672Z,1528892645.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:06.071Z,1528892646.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:24:06.072Z,1528892646.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:06.474Z,1528892646.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:24:06.475Z,1528892646.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:06.862Z,1528892646.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:24:06.863Z,1528892646.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:07.251Z,1528892647.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T12:24:07.252Z,1528892647.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:07.653Z,1528892647.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T12:24:07.654Z,1528892647.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:08.047Z,1528892648.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T12:24:08.047Z,1528892648.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:08.478Z,1528892648.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:24:08.479Z,1528892648.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:08.859Z,1528892648.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:24:08.859Z,1528892648.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:09.262Z,1528892649.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T12:24:09.263Z,1528892649.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:09.653Z,1528892649.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:24:09.654Z,1528892649.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:10.060Z,1528892650.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:24:10.061Z,1528892650.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:10.451Z,1528892650.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:24:10.452Z,1528892650.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:10.853Z,1528892650.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:24:10.854Z,1528892650.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:11.253Z,1528892651.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:24:11.254Z,1528892651.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:11.658Z,1528892651.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:24:11.659Z,1528892651.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:12.062Z,1528892652.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:24:12.063Z,1528892652.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:12.459Z,1528892652.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:24:12.460Z,1528892652.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:12.852Z,1528892652.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:24:12.853Z,1528892652.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:13.255Z,1528892653.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:24:13.256Z,1528892653.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:13.655Z,1528892653.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:24:13.656Z,1528892653.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:14.054Z,1528892654.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:24:14.055Z,1528892654.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:14.462Z,1528892654.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:24:14.463Z,1528892654.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:14.863Z,1528892654.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:24:14.864Z,1528892654.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:15.266Z,1528892655.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:24:15.267Z,1528892655.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:15.656Z,1528892655.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T12:24:15.657Z,1528892655.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:16.056Z,1528892656.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:24:16.057Z,1528892656.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:16.456Z,1528892656.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:24:16.457Z,1528892656.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:16.856Z,1528892656.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:24:16.857Z,1528892656.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:17.254Z,1528892657.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:24:17.255Z,1528892657.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:17.661Z,1528892657.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:24:17.662Z,1528892657.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:18.063Z,1528892658.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:24:18.064Z,1528892658.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:18.460Z,1528892658.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:24:18.461Z,1528892658.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:18.855Z,1528892658.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:24:18.856Z,1528892658.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:19.257Z,1528892659.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:24:19.258Z,1528892659.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:19.658Z,1528892659.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:24:19.659Z,1528892659.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:20.055Z,1528892660.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:24:20.056Z,1528892660.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:20.468Z,1528892660.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:24:20.489Z,1528892660.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:20.863Z,1528892660.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:21.260Z,1528892661.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:21.655Z,1528892661.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:22.054Z,1528892662.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:22.452Z,1528892662.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:22.855Z,1528892662.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:23.257Z,1528892663.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:23.660Z,1528892663.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:24.064Z,1528892664.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:24.460Z,1528892664.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:24.851Z,1528892664.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:25.258Z,1528892665.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:25.655Z,1528892665.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:26.051Z,1528892666.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:26.460Z,1528892666.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:26.863Z,1528892666.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:27.264Z,1528892667.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:27.660Z,1528892667.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:28.058Z,1528892668.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:28.452Z,1528892668.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:28.860Z,1528892668.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:29.256Z,1528892669.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:29.666Z,1528892669.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:30.066Z,1528892670.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:30.465Z,1528892670.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:30.856Z,1528892670.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:31.260Z,1528892671.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:31.660Z,1528892671.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:32.056Z,1528892672.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:32.468Z,1528892672.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:32.865Z,1528892672.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:35.967Z,1528892675.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:35.970Z,1528892675.970 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T12:19:35.7Z
2018-06-13T12:24:35.970Z,1528892675.970 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T12:24:35.970Z,1528892675.970 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T12:24:36.148Z,1528892676.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:37.268Z,1528892677.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:37.424Z,1528892677.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:37.860Z,1528892677.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:38.266Z,1528892678.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:38.652Z,1528892678.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:39.028Z,1528892679.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:39.452Z,1528892679.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:39.830Z,1528892679.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:40.256Z,1528892680.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:40.659Z,1528892680.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:41.063Z,1528892681.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:41.443Z,1528892681.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:41.836Z,1528892681.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:44.931Z,1528892684.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:45.017Z,1528892685.017 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0208.lzma
2018-06-13T12:24:45.087Z,1528892685.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:45.478Z,1528892685.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:45.815Z,1528892685.815 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0208.lzma.bak
2018-06-13T12:24:45.815Z,1528892685.815 [DataOverHttps](INFO): SBD MOMSN=8329214
2018-06-13T12:24:45.889Z,1528892685.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:47.774Z,1528892687.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:47.915Z,1528892687.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:48.325Z,1528892688.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:48.728Z,1528892688.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:49.126Z,1528892689.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:52.327Z,1528892692.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:52.500Z,1528892692.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:52.876Z,1528892692.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:53.275Z,1528892693.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:53.674Z,1528892693.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:54.074Z,1528892694.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:54.482Z,1528892694.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:54.878Z,1528892694.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:55.282Z,1528892695.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:24:59.998Z,1528892699.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:00.117Z,1528892700.117 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180613T032335/Express0209.lzma
2018-06-13T12:25:00.182Z,1528892700.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:00.581Z,1528892700.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:00.918Z,1528892700.918 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0209.lzma.bak
2018-06-13T12:25:00.918Z,1528892700.918 [DataOverHttps](INFO): SBD MOMSN=8329216
2018-06-13T12:25:00.992Z,1528892700.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:02.852Z,1528892702.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:02.855Z,1528892702.855 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T12:25:02.855Z,1528892702.855 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T12:25:02.855Z,1528892702.855 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T12:25:03.027Z,1528892703.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:06.144Z,1528892706.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:06.273Z,1528892706.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:06.689Z,1528892706.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:07.100Z,1528892707.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:07.483Z,1528892707.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:07.861Z,1528892707.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:08.292Z,1528892708.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:08.688Z,1528892708.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:09.085Z,1528892709.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:09.496Z,1528892709.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:09.886Z,1528892709.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:10.292Z,1528892710.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:10.689Z,1528892710.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:11.088Z,1528892711.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:11.488Z,1528892711.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:11.884Z,1528892711.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:12.288Z,1528892712.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:12.694Z,1528892712.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:13.094Z,1528892713.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:13.490Z,1528892713.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:13.869Z,1528892713.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:14.272Z,1528892714.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:14.670Z,1528892714.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:15.070Z,1528892715.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:15.488Z,1528892715.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:15.895Z,1528892715.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:16.296Z,1528892716.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:16.672Z,1528892716.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:17.076Z,1528892717.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:17.476Z,1528892717.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:17.876Z,1528892717.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:18.273Z,1528892718.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:18.701Z,1528892718.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:19.103Z,1528892719.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:19.478Z,1528892719.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:19.872Z,1528892719.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:20.289Z,1528892720.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:20.674Z,1528892720.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:21.103Z,1528892721.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:21.511Z,1528892721.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:21.884Z,1528892721.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:22.279Z,1528892722.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:22.705Z,1528892722.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:23.104Z,1528892723.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:23.477Z,1528892723.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:23.881Z,1528892723.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:24.288Z,1528892724.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:24.684Z,1528892724.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:25.088Z,1528892725.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:25.481Z,1528892725.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:25.888Z,1528892725.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:26.282Z,1528892726.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:26.674Z,1528892726.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:27.075Z,1528892727.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:27.508Z,1528892727.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:27.907Z,1528892727.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:28.288Z,1528892728.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:28.686Z,1528892728.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:29.102Z,1528892729.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:29.483Z,1528892729.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:29.876Z,1528892729.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:30.274Z,1528892730.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:30.699Z,1528892730.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:31.086Z,1528892731.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:31.484Z,1528892731.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:31.888Z,1528892731.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:32.287Z,1528892732.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:32.679Z,1528892732.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:33.088Z,1528892733.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:33.490Z,1528892733.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:33.912Z,1528892733.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:34.286Z,1528892734.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:34.675Z,1528892734.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:35.083Z,1528892735.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:35.513Z,1528892735.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:35.889Z,1528892735.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:36.281Z,1528892736.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:36.771Z,1528892736.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:37.158Z,1528892737.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:37.523Z,1528892737.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:37.945Z,1528892737.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:38.290Z,1528892738.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:38.696Z,1528892738.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:39.072Z,1528892739.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:39.489Z,1528892739.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:39.889Z,1528892739.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:40.316Z,1528892740.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:40.682Z,1528892740.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:41.077Z,1528892741.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:41.482Z,1528892741.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:41.917Z,1528892741.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:42.283Z,1528892742.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:42.679Z,1528892742.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:43.082Z,1528892743.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:43.481Z,1528892743.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:43.888Z,1528892743.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:44.285Z,1528892744.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:44.678Z,1528892744.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:45.072Z,1528892745.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:45.487Z,1528892745.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:45.890Z,1528892745.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:46.285Z,1528892746.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:46.679Z,1528892746.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:47.072Z,1528892747.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:47.487Z,1528892747.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:47.886Z,1528892747.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:48.289Z,1528892748.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:48.673Z,1528892748.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:49.073Z,1528892749.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:49.491Z,1528892749.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:49.900Z,1528892749.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:50.288Z,1528892750.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:50.673Z,1528892750.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:51.071Z,1528892751.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:51.486Z,1528892751.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:51.885Z,1528892751.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:52.297Z,1528892752.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:52.684Z,1528892752.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:53.080Z,1528892753.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:53.481Z,1528892753.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:53.881Z,1528892753.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:54.289Z,1528892754.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:54.674Z,1528892754.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:55.073Z,1528892755.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:55.485Z,1528892755.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:55.890Z,1528892755.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:56.292Z,1528892756.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:56.680Z,1528892756.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:57.080Z,1528892757.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:57.484Z,1528892757.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:57.884Z,1528892757.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:58.286Z,1528892758.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:58.680Z,1528892758.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:59.078Z,1528892759.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:59.481Z,1528892759.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:25:59.882Z,1528892759.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:00.286Z,1528892760.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:00.681Z,1528892760.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:01.068Z,1528892761.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:01.485Z,1528892761.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:01.888Z,1528892761.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:02.283Z,1528892762.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:02.681Z,1528892762.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:03.086Z,1528892763.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:03.490Z,1528892763.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:06.591Z,1528892766.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:06.746Z,1528892766.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:07.135Z,1528892767.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:07.543Z,1528892767.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:07.930Z,1528892767.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:08.342Z,1528892768.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:08.738Z,1528892768.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:09.159Z,1528892769.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:09.545Z,1528892769.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:09.947Z,1528892769.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:10.333Z,1528892770.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:10.717Z,1528892770.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:11.120Z,1528892771.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:11.548Z,1528892771.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:11.952Z,1528892771.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:12.352Z,1528892772.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:12.724Z,1528892772.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:13.126Z,1528892773.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:13.550Z,1528892773.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:13.964Z,1528892773.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:14.334Z,1528892774.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:14.732Z,1528892774.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:15.129Z,1528892775.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:15.535Z,1528892775.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:15.961Z,1528892775.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:16.337Z,1528892776.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:16.742Z,1528892776.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:17.124Z,1528892777.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:17.535Z,1528892777.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:17.942Z,1528892777.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:18.338Z,1528892778.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:18.731Z,1528892778.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:19.137Z,1528892779.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:19.533Z,1528892779.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:19.941Z,1528892779.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:20.371Z,1528892780.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:20.725Z,1528892780.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:21.124Z,1528892781.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:21.543Z,1528892781.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:21.948Z,1528892781.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:22.333Z,1528892782.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:22.726Z,1528892782.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:23.120Z,1528892783.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:23.533Z,1528892783.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:23.937Z,1528892783.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:24.333Z,1528892784.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:24.725Z,1528892784.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:25.135Z,1528892785.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:25.529Z,1528892785.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:25.948Z,1528892785.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:26.342Z,1528892786.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:26.725Z,1528892786.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:27.124Z,1528892787.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:27.538Z,1528892787.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:27.942Z,1528892787.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:28.335Z,1528892788.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:28.730Z,1528892788.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:29.130Z,1528892789.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:29.535Z,1528892789.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:29.937Z,1528892789.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:30.334Z,1528892790.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:30.734Z,1528892790.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:31.132Z,1528892791.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:31.530Z,1528892791.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:31.935Z,1528892791.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:32.337Z,1528892792.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:32.736Z,1528892792.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:33.134Z,1528892793.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:33.538Z,1528892793.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:33.934Z,1528892793.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:34.332Z,1528892794.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:34.731Z,1528892794.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:35.131Z,1528892795.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:35.533Z,1528892795.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:35.938Z,1528892795.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:36.331Z,1528892796.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:36.730Z,1528892796.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:37.131Z,1528892797.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:37.545Z,1528892797.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:37.938Z,1528892797.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:38.338Z,1528892798.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:38.730Z,1528892798.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:39.135Z,1528892799.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:39.535Z,1528892799.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:39.940Z,1528892799.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:40.339Z,1528892800.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:40.738Z,1528892800.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:41.137Z,1528892801.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:41.534Z,1528892801.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:41.942Z,1528892801.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:42.316Z,1528892802.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:42.744Z,1528892802.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:43.140Z,1528892803.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:43.542Z,1528892803.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:43.916Z,1528892803.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:44.321Z,1528892804.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:44.716Z,1528892804.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:45.121Z,1528892805.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:45.523Z,1528892805.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:45.927Z,1528892805.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:46.330Z,1528892806.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:46.727Z,1528892806.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:47.120Z,1528892807.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:47.523Z,1528892807.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:47.923Z,1528892807.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:48.320Z,1528892808.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:48.727Z,1528892808.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:49.131Z,1528892809.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:49.528Z,1528892809.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:49.922Z,1528892809.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:50.324Z,1528892810.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:50.723Z,1528892810.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:51.124Z,1528892811.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:51.524Z,1528892811.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:51.927Z,1528892811.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:52.330Z,1528892812.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:52.735Z,1528892812.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:53.121Z,1528892813.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:53.523Z,1528892813.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:53.929Z,1528892813.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:54.323Z,1528892814.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:54.728Z,1528892814.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:55.132Z,1528892815.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:55.524Z,1528892815.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:55.923Z,1528892815.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:56.324Z,1528892816.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:56.722Z,1528892816.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:57.136Z,1528892817.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:57.526Z,1528892817.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:57.932Z,1528892817.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:58.338Z,1528892818.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:58.736Z,1528892818.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:59.121Z,1528892819.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:59.522Z,1528892819.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:26:59.924Z,1528892819.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:00.320Z,1528892820.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:00.731Z,1528892820.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:01.133Z,1528892821.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:01.527Z,1528892821.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:01.934Z,1528892821.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:01.934Z,1528892821.934 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 180
2018-06-13T12:27:01.934Z,1528892821.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:27:01.938Z,1528892821.938 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:01.938Z,1528892821.938 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 180
2018-06-13T12:27:01.938Z,1528892821.938 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:27:01.940Z,1528892821.940 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:01.940Z,1528892821.940 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 180
2018-06-13T12:27:01.940Z,1528892821.940 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:27:02.029Z,1528892822.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:27:02.029Z,1528892822.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:27:02.029Z,1528892822.029 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:27:02.401Z,1528892822.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:27:02.401Z,1528892822.401 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 180
2018-06-13T12:27:02.401Z,1528892822.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:27:02.402Z,1528892822.402 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 180
2018-06-13T12:27:02.402Z,1528892822.402 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:27:02.402Z,1528892822.402 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 180
2018-06-13T12:27:02.719Z,1528892822.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:27:02.719Z,1528892822.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:27:02.720Z,1528892822.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:27:02.720Z,1528892822.720 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:27:02.720Z,1528892822.720 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:27:02.721Z,1528892822.721 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:27:02.721Z,1528892822.721 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:27:02.722Z,1528892822.722 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:27:02.722Z,1528892822.722 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:27:03.130Z,1528892823.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:27:03.131Z,1528892823.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:03.530Z,1528892823.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:27:03.531Z,1528892823.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:06.644Z,1528892826.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2018-06-13T12:27:06.645Z,1528892826.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:06.830Z,1528892826.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T12:27:06.831Z,1528892826.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:07.193Z,1528892827.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T12:27:07.194Z,1528892827.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:07.581Z,1528892827.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:27:07.582Z,1528892827.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:07.980Z,1528892827.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:27:07.981Z,1528892827.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:08.387Z,1528892828.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T12:27:08.388Z,1528892828.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:08.785Z,1528892828.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T12:27:08.786Z,1528892828.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:09.187Z,1528892829.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T12:27:09.188Z,1528892829.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:09.598Z,1528892829.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T12:27:09.600Z,1528892829.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:09.990Z,1528892829.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T12:27:09.991Z,1528892829.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:10.392Z,1528892830.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T12:27:10.393Z,1528892830.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:10.791Z,1528892830.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T12:27:10.792Z,1528892830.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:11.163Z,1528892831.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:27:11.164Z,1528892831.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:11.593Z,1528892831.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T12:27:11.594Z,1528892831.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:11.993Z,1528892831.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T12:27:11.994Z,1528892831.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:12.394Z,1528892832.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T12:27:12.395Z,1528892832.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:12.793Z,1528892832.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T12:27:12.794Z,1528892832.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:13.168Z,1528892833.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:27:13.169Z,1528892833.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:13.598Z,1528892833.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T12:27:13.599Z,1528892833.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:13.995Z,1528892833.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T12:27:13.996Z,1528892833.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:14.396Z,1528892834.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T12:27:14.397Z,1528892834.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:14.800Z,1528892834.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T12:27:14.801Z,1528892834.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:15.176Z,1528892835.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:27:15.177Z,1528892835.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:15.576Z,1528892835.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:27:15.577Z,1528892835.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:15.975Z,1528892835.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:27:15.975Z,1528892835.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:16.382Z,1528892836.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:27:16.383Z,1528892836.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:16.783Z,1528892836.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T12:27:16.784Z,1528892836.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:17.180Z,1528892837.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:27:17.180Z,1528892837.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:17.573Z,1528892837.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:27:17.574Z,1528892837.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:17.975Z,1528892837.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:27:17.976Z,1528892837.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:18.373Z,1528892838.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:27:18.374Z,1528892838.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:18.779Z,1528892838.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:27:18.780Z,1528892838.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:19.182Z,1528892839.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:27:19.183Z,1528892839.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:19.581Z,1528892839.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:27:19.582Z,1528892839.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:19.975Z,1528892839.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:27:19.976Z,1528892839.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:20.386Z,1528892840.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T12:27:20.387Z,1528892840.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:20.772Z,1528892840.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:27:20.773Z,1528892840.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:21.176Z,1528892841.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:27:21.177Z,1528892841.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:21.579Z,1528892841.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:27:21.580Z,1528892841.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:21.984Z,1528892841.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:22.388Z,1528892842.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:22.792Z,1528892842.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:23.175Z,1528892843.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:23.581Z,1528892843.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:23.979Z,1528892843.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:24.372Z,1528892844.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:24.788Z,1528892844.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:25.184Z,1528892845.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:25.584Z,1528892845.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:25.976Z,1528892845.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:26.376Z,1528892846.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:26.772Z,1528892846.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:27.180Z,1528892847.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:27.578Z,1528892847.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:27.985Z,1528892847.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:28.388Z,1528892848.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:28.789Z,1528892848.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:29.176Z,1528892849.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:29.574Z,1528892849.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:29.976Z,1528892849.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:30.372Z,1528892850.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:30.785Z,1528892850.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:31.190Z,1528892851.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:31.585Z,1528892851.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:31.984Z,1528892851.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:32.385Z,1528892852.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:32.784Z,1528892852.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:33.186Z,1528892853.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:33.568Z,1528892853.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:33.994Z,1528892853.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:34.391Z,1528892854.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:34.792Z,1528892854.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:35.164Z,1528892855.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:35.572Z,1528892855.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:35.981Z,1528892855.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:36.368Z,1528892856.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:36.800Z,1528892856.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:37.203Z,1528892857.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:37.575Z,1528892857.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:37.973Z,1528892857.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:38.372Z,1528892858.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:38.771Z,1528892858.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:39.180Z,1528892859.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:39.574Z,1528892859.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:39.981Z,1528892859.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:40.383Z,1528892860.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:40.783Z,1528892860.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:41.171Z,1528892861.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:41.574Z,1528892861.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:41.971Z,1528892861.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:42.371Z,1528892862.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:42.780Z,1528892862.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:43.182Z,1528892863.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:43.580Z,1528892863.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:43.973Z,1528892863.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:44.373Z,1528892864.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:44.772Z,1528892864.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:45.174Z,1528892865.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:45.575Z,1528892865.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:45.980Z,1528892865.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:46.383Z,1528892866.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:46.782Z,1528892866.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:47.170Z,1528892867.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:47.575Z,1528892867.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:47.974Z,1528892867.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:48.372Z,1528892868.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:48.780Z,1528892868.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:49.182Z,1528892869.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:49.580Z,1528892869.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:49.973Z,1528892869.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:50.370Z,1528892870.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:50.771Z,1528892870.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:51.173Z,1528892871.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:51.570Z,1528892871.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:51.980Z,1528892871.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:52.383Z,1528892872.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:52.782Z,1528892872.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:53.174Z,1528892873.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:53.574Z,1528892873.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:53.976Z,1528892873.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:54.374Z,1528892874.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:54.779Z,1528892874.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:55.184Z,1528892875.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:55.579Z,1528892875.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:55.973Z,1528892875.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:56.371Z,1528892876.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:56.792Z,1528892876.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:57.186Z,1528892877.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:57.568Z,1528892877.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:57.994Z,1528892877.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:58.390Z,1528892878.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:58.786Z,1528892878.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:59.173Z,1528892879.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:59.572Z,1528892879.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:27:59.972Z,1528892879.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:00.376Z,1528892880.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:00.803Z,1528892880.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:01.183Z,1528892881.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:01.583Z,1528892881.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:01.974Z,1528892881.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:02.380Z,1528892882.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:02.774Z,1528892882.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:03.180Z,1528892883.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:03.580Z,1528892883.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:03.996Z,1528892883.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:04.392Z,1528892884.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:04.788Z,1528892884.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:05.174Z,1528892885.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:05.578Z,1528892885.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:05.977Z,1528892885.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:06.378Z,1528892886.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:06.785Z,1528892886.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:07.192Z,1528892887.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:10.300Z,1528892890.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:10.472Z,1528892890.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:10.864Z,1528892890.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:11.277Z,1528892891.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:11.650Z,1528892891.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:12.059Z,1528892892.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:12.459Z,1528892892.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:12.854Z,1528892892.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:13.250Z,1528892893.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:13.649Z,1528892893.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:14.050Z,1528892894.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:14.450Z,1528892894.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:14.855Z,1528892894.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:15.258Z,1528892895.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:15.664Z,1528892895.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:16.050Z,1528892896.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:16.452Z,1528892896.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:16.851Z,1528892896.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:17.250Z,1528892897.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:17.650Z,1528892897.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:18.059Z,1528892898.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:18.459Z,1528892898.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:18.856Z,1528892898.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:19.252Z,1528892899.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:19.650Z,1528892899.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:20.049Z,1528892900.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:20.451Z,1528892900.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:20.864Z,1528892900.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:21.259Z,1528892901.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:21.688Z,1528892901.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:22.050Z,1528892902.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:22.450Z,1528892902.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:22.856Z,1528892902.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:23.251Z,1528892903.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:23.650Z,1528892903.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:24.055Z,1528892904.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:24.459Z,1528892904.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:24.855Z,1528892904.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:25.251Z,1528892905.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:25.649Z,1528892905.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:26.050Z,1528892906.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:26.452Z,1528892906.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:26.856Z,1528892906.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:27.259Z,1528892907.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:27.661Z,1528892907.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:28.050Z,1528892908.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:28.452Z,1528892908.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:28.851Z,1528892908.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:29.247Z,1528892909.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:29.651Z,1528892909.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:30.059Z,1528892910.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:30.460Z,1528892910.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:30.860Z,1528892910.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:31.251Z,1528892911.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:31.646Z,1528892911.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:32.051Z,1528892912.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:32.461Z,1528892912.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:32.859Z,1528892912.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:33.263Z,1528892913.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:33.664Z,1528892913.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:34.049Z,1528892914.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:34.452Z,1528892914.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:34.851Z,1528892914.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:35.254Z,1528892915.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:35.651Z,1528892915.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:36.060Z,1528892916.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:36.464Z,1528892916.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:36.859Z,1528892916.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:37.252Z,1528892917.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:37.650Z,1528892917.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:38.043Z,1528892918.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:38.456Z,1528892918.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:38.861Z,1528892918.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:39.263Z,1528892919.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:39.668Z,1528892919.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:40.049Z,1528892920.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:40.456Z,1528892920.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:40.852Z,1528892920.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:41.260Z,1528892921.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:41.650Z,1528892921.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:42.072Z,1528892922.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:42.468Z,1528892922.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:42.863Z,1528892922.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:43.257Z,1528892923.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:43.652Z,1528892923.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:44.053Z,1528892924.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:44.454Z,1528892924.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:44.862Z,1528892924.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:45.264Z,1528892925.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:45.666Z,1528892925.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:46.058Z,1528892926.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:46.452Z,1528892926.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:46.865Z,1528892926.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:47.257Z,1528892927.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:47.658Z,1528892927.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:48.066Z,1528892928.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:48.464Z,1528892928.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:48.861Z,1528892928.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:49.259Z,1528892929.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:49.664Z,1528892929.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:50.066Z,1528892930.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:50.465Z,1528892930.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:50.868Z,1528892930.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:51.266Z,1528892931.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:51.667Z,1528892931.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:52.040Z,1528892932.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:52.468Z,1528892932.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:52.845Z,1528892932.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:53.244Z,1528892933.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:53.659Z,1528892933.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:54.075Z,1528892934.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:54.475Z,1528892934.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:54.859Z,1528892934.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:55.252Z,1528892935.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:55.645Z,1528892935.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:56.047Z,1528892936.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:56.448Z,1528892936.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:56.859Z,1528892936.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:57.258Z,1528892937.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:57.659Z,1528892937.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:58.047Z,1528892938.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:58.452Z,1528892938.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:58.856Z,1528892938.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:59.252Z,1528892939.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:28:59.650Z,1528892939.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:00.059Z,1528892940.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:00.455Z,1528892940.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:00.855Z,1528892940.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:01.256Z,1528892941.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:01.651Z,1528892941.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:02.052Z,1528892942.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:02.456Z,1528892942.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:02.859Z,1528892942.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:03.281Z,1528892943.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:03.684Z,1528892943.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:04.052Z,1528892944.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:04.456Z,1528892944.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:04.852Z,1528892944.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:05.251Z,1528892945.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:05.652Z,1528892945.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:06.084Z,1528892946.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:06.463Z,1528892946.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:06.860Z,1528892946.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:09.960Z,1528892949.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:10.127Z,1528892950.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:10.536Z,1528892950.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:10.938Z,1528892950.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:11.337Z,1528892951.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:11.716Z,1528892951.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:12.120Z,1528892952.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:12.511Z,1528892952.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:12.916Z,1528892952.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:13.324Z,1528892953.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:13.721Z,1528892953.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:14.111Z,1528892954.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:14.511Z,1528892954.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:14.908Z,1528892954.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:15.321Z,1528892955.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:15.727Z,1528892955.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:16.128Z,1528892956.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:16.524Z,1528892956.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:16.923Z,1528892956.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:17.307Z,1528892957.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:17.710Z,1528892957.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:18.112Z,1528892958.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:18.510Z,1528892958.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:18.919Z,1528892958.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:19.320Z,1528892959.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:19.717Z,1528892959.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:20.110Z,1528892960.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:20.517Z,1528892960.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:20.911Z,1528892960.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:21.311Z,1528892961.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:21.720Z,1528892961.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:22.117Z,1528892962.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:22.523Z,1528892962.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:22.925Z,1528892962.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:23.315Z,1528892963.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:23.720Z,1528892963.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:24.120Z,1528892964.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:24.508Z,1528892964.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:24.921Z,1528892964.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:25.324Z,1528892965.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:25.722Z,1528892965.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:26.116Z,1528892966.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:26.521Z,1528892966.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:26.908Z,1528892966.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:27.325Z,1528892967.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:27.724Z,1528892967.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:28.123Z,1528892968.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:28.526Z,1528892968.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:28.936Z,1528892968.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:29.301Z,1528892969.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:29.713Z,1528892969.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:30.105Z,1528892970.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:30.509Z,1528892970.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:30.934Z,1528892970.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:31.332Z,1528892971.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:31.734Z,1528892971.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:32.108Z,1528892972.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:32.510Z,1528892972.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:32.904Z,1528892972.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:33.313Z,1528892973.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:33.708Z,1528892973.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:34.135Z,1528892974.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:34.519Z,1528892974.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:34.919Z,1528892974.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:35.308Z,1528892975.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:35.720Z,1528892975.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:36.110Z,1528892976.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:36.509Z,1528892976.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:36.920Z,1528892976.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:37.328Z,1528892977.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:37.717Z,1528892977.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:38.120Z,1528892978.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:38.511Z,1528892978.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:38.908Z,1528892978.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:39.313Z,1528892979.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:39.714Z,1528892979.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:40.121Z,1528892980.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:40.519Z,1528892980.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:40.928Z,1528892980.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:41.308Z,1528892981.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:41.712Z,1528892981.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:42.120Z,1528892982.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:42.516Z,1528892982.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:42.920Z,1528892982.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:43.323Z,1528892983.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:43.717Z,1528892983.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:44.112Z,1528892984.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:44.512Z,1528892984.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:44.916Z,1528892984.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:45.314Z,1528892985.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:45.714Z,1528892985.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:46.120Z,1528892986.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:46.520Z,1528892986.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:46.922Z,1528892986.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:47.311Z,1528892987.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:47.714Z,1528892987.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:48.118Z,1528892988.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:48.522Z,1528892988.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:48.923Z,1528892988.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:49.323Z,1528892989.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:49.718Z,1528892989.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:50.114Z,1528892990.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:50.510Z,1528892990.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:50.913Z,1528892990.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:51.325Z,1528892991.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:51.710Z,1528892991.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:52.122Z,1528892992.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:52.524Z,1528892992.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:52.924Z,1528892992.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:53.308Z,1528892993.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:53.716Z,1528892993.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:54.110Z,1528892994.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:54.516Z,1528892994.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:54.924Z,1528892994.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:55.323Z,1528892995.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:55.718Z,1528892995.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:56.112Z,1528892996.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:56.512Z,1528892996.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:56.908Z,1528892996.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:57.316Z,1528892997.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:57.720Z,1528892997.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:58.117Z,1528892998.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:58.527Z,1528892998.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:58.921Z,1528892998.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:59.309Z,1528892999.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:29:59.713Z,1528892999.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:00.114Z,1528893000.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:00.509Z,1528893000.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:00.921Z,1528893000.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:01.325Z,1528893001.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:01.717Z,1528893001.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:02.116Z,1528893002.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:02.513Z,1528893002.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:02.915Z,1528893002.915 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:02.915Z,1528893002.915 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 181
2018-06-13T12:30:02.915Z,1528893002.915 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:30:02.917Z,1528893002.917 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:02.917Z,1528893002.917 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 181
2018-06-13T12:30:02.917Z,1528893002.917 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:30:02.919Z,1528893002.919 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:02.919Z,1528893002.919 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 181
2018-06-13T12:30:02.919Z,1528893002.919 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:30:02.998Z,1528893002.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:30:02.998Z,1528893002.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:30:02.998Z,1528893002.998 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:30:03.327Z,1528893003.327 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T12:30:03.327Z,1528893003.327 [Default:CheckIn:C.Wait] Stopped
2018-06-13T12:30:03.327Z,1528893003.327 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T12:30:03.327Z,1528893003.327 [Default:CheckIn:D] Running Loop=1
2018-06-13T12:30:03.402Z,1528893003.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:30:03.402Z,1528893003.402 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 181
2018-06-13T12:30:03.402Z,1528893003.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:30:03.402Z,1528893003.402 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 181
2018-06-13T12:30:03.403Z,1528893003.403 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:30:03.403Z,1528893003.403 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 181
2018-06-13T12:30:03.728Z,1528893003.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:30:03.728Z,1528893003.728 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:30:03.728Z,1528893003.728 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:30:03.729Z,1528893003.729 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:30:03.729Z,1528893003.729 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:30:03.730Z,1528893003.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:30:03.730Z,1528893003.730 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:30:03.730Z,1528893003.730 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:30:03.731Z,1528893003.731 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:30:03.732Z,1528893003.732 [Default:CheckIn:D] Stopped
2018-06-13T12:30:03.732Z,1528893003.732 [Default:CheckIn:E] Running Loop=1
2018-06-13T12:30:06.830Z,1528893006.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2018-06-13T12:30:06.831Z,1528893006.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:06.835Z,1528893006.835 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 542.838118 min 
2018-06-13T12:30:06.835Z,1528893006.835 [Default:CheckIn:E] Stopped
2018-06-13T12:30:06.835Z,1528893006.835 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T12:30:06.835Z,1528893006.835 [Default:CheckIn] Stopped
2018-06-13T12:30:06.835Z,1528893006.835 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T12:30:06.835Z,1528893006.835 [Default:CheckIn](INFO): Running loop #53
2018-06-13T12:30:06.835Z,1528893006.835 [Default:CheckIn] Running Loop=53
2018-06-13T12:30:06.835Z,1528893006.835 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T12:30:06.836Z,1528893006.836 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T12:30:06.996Z,1528893006.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T12:30:06.998Z,1528893006.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:07.374Z,1528893007.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T12:30:07.375Z,1528893007.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:07.767Z,1528893007.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T12:30:07.768Z,1528893007.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:08.168Z,1528893008.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T12:30:08.168Z,1528893008.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:08.562Z,1528893008.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:30:08.563Z,1528893008.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:08.971Z,1528893008.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T12:30:08.972Z,1528893008.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:09.396Z,1528893009.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T12:30:09.401Z,1528893009.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:09.774Z,1528893009.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T12:30:09.775Z,1528893009.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:10.165Z,1528893010.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T12:30:10.166Z,1528893010.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:10.564Z,1528893010.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:30:10.565Z,1528893010.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:10.962Z,1528893010.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:30:10.963Z,1528893010.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:11.366Z,1528893011.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T12:30:11.367Z,1528893011.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:11.768Z,1528893011.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T12:30:11.769Z,1528893011.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:12.174Z,1528893012.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T12:30:12.175Z,1528893012.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:12.574Z,1528893012.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T12:30:12.575Z,1528893012.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:12.976Z,1528893012.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T12:30:12.977Z,1528893012.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:13.366Z,1528893013.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T12:30:13.367Z,1528893013.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:13.766Z,1528893013.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T12:30:13.767Z,1528893013.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:14.172Z,1528893014.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T12:30:14.177Z,1528893014.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:14.566Z,1528893014.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T12:30:14.567Z,1528893014.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:14.980Z,1528893014.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T12:30:14.981Z,1528893014.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:15.380Z,1528893015.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T12:30:15.381Z,1528893015.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:15.779Z,1528893015.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T12:30:15.780Z,1528893015.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:16.172Z,1528893016.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T12:30:16.173Z,1528893016.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:16.567Z,1528893016.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T12:30:16.568Z,1528893016.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:16.967Z,1528893016.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T12:30:16.968Z,1528893016.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:17.368Z,1528893017.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T12:30:17.369Z,1528893017.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:17.766Z,1528893017.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T12:30:17.767Z,1528893017.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:18.176Z,1528893018.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T12:30:18.177Z,1528893018.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:18.580Z,1528893018.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T12:30:18.581Z,1528893018.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:18.980Z,1528893018.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T12:30:18.981Z,1528893018.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:19.368Z,1528893019.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T12:30:19.369Z,1528893019.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:19.772Z,1528893019.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T12:30:19.773Z,1528893019.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:20.177Z,1528893020.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T12:30:20.178Z,1528893020.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:20.571Z,1528893020.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T12:30:20.572Z,1528893020.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:20.981Z,1528893020.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T12:30:20.982Z,1528893020.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:21.379Z,1528893021.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T12:30:21.380Z,1528893021.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:21.781Z,1528893021.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T12:30:21.782Z,1528893021.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:22.166Z,1528893022.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T12:30:22.167Z,1528893022.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:22.568Z,1528893022.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T12:30:22.569Z,1528893022.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:22.966Z,1528893022.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:23.367Z,1528893023.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:23.768Z,1528893023.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:24.180Z,1528893024.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:24.580Z,1528893024.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:24.976Z,1528893024.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:25.369Z,1528893025.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:25.776Z,1528893025.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:26.169Z,1528893026.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:26.576Z,1528893026.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:26.980Z,1528893026.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:27.387Z,1528893027.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:27.788Z,1528893027.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:28.168Z,1528893028.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:28.572Z,1528893028.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:28.970Z,1528893028.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:29.369Z,1528893029.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:29.773Z,1528893029.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:30.182Z,1528893030.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:30.581Z,1528893030.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:30.977Z,1528893030.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:31.376Z,1528893031.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:31.769Z,1528893031.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:32.178Z,1528893032.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:32.580Z,1528893032.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:32.975Z,1528893032.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:33.388Z,1528893033.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:33.788Z,1528893033.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:34.178Z,1528893034.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:34.582Z,1528893034.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:34.980Z,1528893034.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:35.378Z,1528893035.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:35.778Z,1528893035.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:36.183Z,1528893036.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:36.582Z,1528893036.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:36.979Z,1528893036.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:37.381Z,1528893037.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:37.756Z,1528893037.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:38.182Z,1528893038.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:38.583Z,1528893038.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:38.982Z,1528893038.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:39.382Z,1528893039.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:39.792Z,1528893039.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:40.177Z,1528893040.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:40.564Z,1528893040.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:40.965Z,1528893040.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:41.364Z,1528893041.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:41.763Z,1528893041.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:42.194Z,1528893042.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:42.571Z,1528893042.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:42.991Z,1528893042.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:43.364Z,1528893043.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:43.764Z,1528893043.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:44.165Z,1528893044.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:44.566Z,1528893044.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:44.971Z,1528893044.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:45.374Z,1528893045.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:45.775Z,1528893045.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:46.172Z,1528893046.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:46.565Z,1528893046.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:46.967Z,1528893046.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:47.366Z,1528893047.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:47.766Z,1528893047.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:48.175Z,1528893048.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:48.571Z,1528893048.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:48.972Z,1528893048.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:49.367Z,1528893049.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:49.767Z,1528893049.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:50.165Z,1528893050.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:50.566Z,1528893050.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:50.971Z,1528893050.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:51.375Z,1528893051.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:51.780Z,1528893051.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:52.167Z,1528893052.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:52.567Z,1528893052.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:52.975Z,1528893052.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:53.371Z,1528893053.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:53.780Z,1528893053.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:54.167Z,1528893054.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:54.567Z,1528893054.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:54.971Z,1528893054.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:55.375Z,1528893055.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:55.776Z,1528893055.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:56.170Z,1528893056.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:56.571Z,1528893056.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:56.984Z,1528893056.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:57.376Z,1528893057.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:57.776Z,1528893057.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:58.166Z,1528893058.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:58.576Z,1528893058.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:58.977Z,1528893058.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:59.377Z,1528893059.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:30:59.775Z,1528893059.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:00.171Z,1528893060.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:00.564Z,1528893060.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:00.980Z,1528893060.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:01.402Z,1528893061.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:01.780Z,1528893061.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:02.168Z,1528893062.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:02.570Z,1528893062.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:02.975Z,1528893062.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:03.379Z,1528893063.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:03.779Z,1528893063.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:06.871Z,1528893066.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:07.051Z,1528893067.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:07.426Z,1528893067.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:07.828Z,1528893067.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:08.224Z,1528893068.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:08.612Z,1528893068.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:09.011Z,1528893069.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:09.409Z,1528893069.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:09.811Z,1528893069.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:10.224Z,1528893070.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:10.628Z,1528893070.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:11.022Z,1528893071.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:11.409Z,1528893071.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:11.808Z,1528893071.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:12.220Z,1528893072.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:12.614Z,1528893072.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:13.024Z,1528893073.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:13.423Z,1528893073.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:13.824Z,1528893073.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:14.211Z,1528893074.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:14.612Z,1528893074.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:15.023Z,1528893075.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:15.422Z,1528893075.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:15.823Z,1528893075.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:16.216Z,1528893076.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:16.622Z,1528893076.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:17.019Z,1528893077.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:17.418Z,1528893077.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:17.801Z,1528893077.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:18.227Z,1528893078.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:18.625Z,1528893078.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:19.032Z,1528893079.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:19.402Z,1528893079.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:19.801Z,1528893079.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:20.206Z,1528893080.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:20.604Z,1528893080.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:21.038Z,1528893081.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:21.415Z,1528893081.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:21.836Z,1528893081.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:22.214Z,1528893082.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:22.606Z,1528893082.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:23.016Z,1528893083.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:23.420Z,1528893083.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:23.812Z,1528893083.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:24.212Z,1528893084.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:24.604Z,1528893084.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:25.012Z,1528893085.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:25.415Z,1528893085.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:25.809Z,1528893085.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:26.206Z,1528893086.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:26.607Z,1528893086.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:27.012Z,1528893087.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:27.415Z,1528893087.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:27.815Z,1528893087.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:28.208Z,1528893088.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:28.607Z,1528893088.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:29.016Z,1528893089.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:29.416Z,1528893089.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:29.812Z,1528893089.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:30.210Z,1528893090.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:30.603Z,1528893090.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:31.012Z,1528893091.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:31.415Z,1528893091.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:31.812Z,1528893091.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:32.206Z,1528893092.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:32.607Z,1528893092.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:33.012Z,1528893093.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:33.415Z,1528893093.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:33.815Z,1528893093.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:34.204Z,1528893094.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:34.606Z,1528893094.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:35.016Z,1528893095.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:35.416Z,1528893095.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:35.816Z,1528893095.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:36.209Z,1528893096.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:36.605Z,1528893096.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:37.016Z,1528893097.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:37.416Z,1528893097.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:37.815Z,1528893097.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:38.208Z,1528893098.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:38.608Z,1528893098.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:39.013Z,1528893099.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:39.415Z,1528893099.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:39.816Z,1528893099.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:40.216Z,1528893100.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:40.607Z,1528893100.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:41.016Z,1528893101.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:41.420Z,1528893101.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:41.820Z,1528893101.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:42.211Z,1528893102.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:42.607Z,1528893102.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:43.020Z,1528893103.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:43.415Z,1528893103.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:43.816Z,1528893103.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:44.209Z,1528893104.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:44.621Z,1528893104.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:45.017Z,1528893105.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:45.420Z,1528893105.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:45.817Z,1528893105.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:46.208Z,1528893106.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:46.606Z,1528893106.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:47.017Z,1528893107.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:47.415Z,1528893107.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:47.816Z,1528893107.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:48.209Z,1528893108.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:48.605Z,1528893108.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:49.017Z,1528893109.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:49.420Z,1528893109.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:49.817Z,1528893109.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:50.207Z,1528893110.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:50.608Z,1528893110.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:51.020Z,1528893111.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:51.417Z,1528893111.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:51.818Z,1528893111.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:52.208Z,1528893112.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:52.614Z,1528893112.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:53.024Z,1528893113.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:53.416Z,1528893113.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:53.818Z,1528893113.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:54.210Z,1528893114.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:54.609Z,1528893114.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:55.010Z,1528893115.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:55.428Z,1528893115.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:55.822Z,1528893115.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:56.224Z,1528893116.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:56.610Z,1528893116.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:57.005Z,1528893117.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:57.408Z,1528893117.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:57.808Z,1528893117.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:58.214Z,1528893118.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:58.621Z,1528893118.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:59.021Z,1528893119.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:59.412Z,1528893119.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:31:59.808Z,1528893119.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:00.213Z,1528893120.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:00.605Z,1528893120.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:01.012Z,1528893121.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:01.418Z,1528893121.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:01.817Z,1528893121.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:02.217Z,1528893122.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:02.607Z,1528893122.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:03.004Z,1528893123.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:03.413Z,1528893123.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:03.807Z,1528893123.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:06.921Z,1528893126.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:07.105Z,1528893127.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:07.479Z,1528893127.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:07.867Z,1528893127.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:08.269Z,1528893128.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:08.663Z,1528893128.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:09.072Z,1528893129.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:09.475Z,1528893129.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:09.872Z,1528893129.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:10.266Z,1528893130.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:10.667Z,1528893130.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:11.072Z,1528893131.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:11.476Z,1528893131.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:11.876Z,1528893131.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:12.268Z,1528893132.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:12.664Z,1528893132.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:13.076Z,1528893133.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:13.472Z,1528893133.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:13.872Z,1528893133.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:14.274Z,1528893134.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:14.667Z,1528893134.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:15.076Z,1528893135.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:15.475Z,1528893135.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:15.872Z,1528893135.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:16.268Z,1528893136.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:16.666Z,1528893136.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:17.074Z,1528893137.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:17.475Z,1528893137.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:17.876Z,1528893137.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:18.269Z,1528893138.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:18.667Z,1528893138.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:19.075Z,1528893139.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:19.472Z,1528893139.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:19.880Z,1528893139.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:20.272Z,1528893140.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:20.667Z,1528893140.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:21.073Z,1528893141.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:21.475Z,1528893141.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:21.880Z,1528893141.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:22.271Z,1528893142.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:22.678Z,1528893142.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:23.074Z,1528893143.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:23.475Z,1528893143.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:23.875Z,1528893143.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:24.269Z,1528893144.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:24.667Z,1528893144.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:25.072Z,1528893145.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:25.473Z,1528893145.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:25.880Z,1528893145.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:26.268Z,1528893146.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:26.668Z,1528893146.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:27.077Z,1528893147.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:27.475Z,1528893147.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:27.880Z,1528893147.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:28.272Z,1528893148.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:28.668Z,1528893148.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:29.080Z,1528893149.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:29.480Z,1528893149.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:29.877Z,1528893149.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:30.269Z,1528893150.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:30.667Z,1528893150.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:31.076Z,1528893151.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:31.475Z,1528893151.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:31.876Z,1528893151.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:32.267Z,1528893152.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:32.668Z,1528893152.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:33.067Z,1528893153.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:33.476Z,1528893153.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:33.875Z,1528893153.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:34.276Z,1528893154.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:34.668Z,1528893154.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:35.070Z,1528893155.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:35.469Z,1528893155.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:35.866Z,1528893155.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:36.275Z,1528893156.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:36.675Z,1528893156.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:37.076Z,1528893157.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:37.472Z,1528893157.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:37.868Z,1528893157.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:38.267Z,1528893158.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:38.673Z,1528893158.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:39.065Z,1528893159.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:39.473Z,1528893159.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:39.874Z,1528893159.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:40.276Z,1528893160.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:40.667Z,1528893160.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:41.068Z,1528893161.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:41.469Z,1528893161.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:41.868Z,1528893161.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:42.302Z,1528893162.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:42.673Z,1528893162.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:43.077Z,1528893163.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:43.467Z,1528893163.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:43.871Z,1528893163.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:44.269Z,1528893164.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:44.669Z,1528893164.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:45.074Z,1528893165.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:45.476Z,1528893165.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:45.876Z,1528893165.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:46.276Z,1528893166.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:46.668Z,1528893166.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:47.069Z,1528893167.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:47.467Z,1528893167.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:47.868Z,1528893167.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:48.277Z,1528893168.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:48.675Z,1528893168.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:49.078Z,1528893169.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:49.470Z,1528893169.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:49.876Z,1528893169.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:50.268Z,1528893170.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:50.671Z,1528893170.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:51.072Z,1528893171.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:51.476Z,1528893171.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:51.878Z,1528893171.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:52.280Z,1528893172.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:52.668Z,1528893172.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:53.067Z,1528893173.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:53.468Z,1528893173.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:53.869Z,1528893173.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:54.277Z,1528893174.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:54.680Z,1528893174.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:55.076Z,1528893175.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:55.471Z,1528893175.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:55.868Z,1528893175.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:56.269Z,1528893176.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:56.670Z,1528893176.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:57.073Z,1528893177.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:57.477Z,1528893177.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:57.882Z,1528893177.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:58.284Z,1528893178.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:58.679Z,1528893178.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:59.084Z,1528893179.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:59.474Z,1528893179.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:32:59.878Z,1528893179.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:00.283Z,1528893180.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:00.680Z,1528893180.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:01.081Z,1528893181.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:01.473Z,1528893181.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:01.880Z,1528893181.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:02.278Z,1528893182.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:02.674Z,1528893182.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:03.068Z,1528893183.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:03.489Z,1528893183.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:03.887Z,1528893183.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:03.887Z,1528893183.887 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 182
2018-06-13T12:33:03.887Z,1528893183.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:33:03.889Z,1528893183.889 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:03.889Z,1528893183.889 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 182
2018-06-13T12:33:03.889Z,1528893183.889 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:33:03.891Z,1528893183.891 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:03.891Z,1528893183.891 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 182
2018-06-13T12:33:03.891Z,1528893183.891 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:33:03.965Z,1528893183.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:33:03.965Z,1528893183.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:33:03.966Z,1528893183.966 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:33:04.401Z,1528893184.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:33:04.401Z,1528893184.401 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 182
2018-06-13T12:33:04.402Z,1528893184.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:33:04.402Z,1528893184.402 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 182
2018-06-13T12:33:04.402Z,1528893184.402 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:33:04.402Z,1528893184.402 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 182
2018-06-13T12:33:04.675Z,1528893184.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:33:04.675Z,1528893184.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:33:04.676Z,1528893184.676 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:33:04.676Z,1528893184.676 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:33:04.676Z,1528893184.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:33:04.681Z,1528893184.681 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:33:04.681Z,1528893184.681 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:33:04.682Z,1528893184.682 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:33:04.682Z,1528893184.682 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:33:05.080Z,1528893185.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:33:05.086Z,1528893185.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:05.481Z,1528893185.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:33:05.482Z,1528893185.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:05.868Z,1528893185.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:33:05.885Z,1528893185.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:06.295Z,1528893186.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:33:06.296Z,1528893186.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:06.693Z,1528893186.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:33:06.694Z,1528893186.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:07.091Z,1528893187.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:33:07.092Z,1528893187.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:07.468Z,1528893187.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:33:07.469Z,1528893187.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:10.572Z,1528893190.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T12:33:10.573Z,1528893190.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:10.748Z,1528893190.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T12:33:10.753Z,1528893190.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:11.156Z,1528893191.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T12:33:11.157Z,1528893191.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:11.564Z,1528893191.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T12:33:11.565Z,1528893191.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:11.955Z,1528893191.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T12:33:11.955Z,1528893191.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:12.352Z,1528893192.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T12:33:12.357Z,1528893192.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:12.727Z,1528893192.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:33:12.728Z,1528893192.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:13.159Z,1528893193.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T12:33:13.160Z,1528893193.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:13.558Z,1528893193.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T12:33:13.559Z,1528893193.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:13.938Z,1528893193.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T12:33:13.939Z,1528893193.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:14.331Z,1528893194.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:33:14.332Z,1528893194.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:14.733Z,1528893194.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:33:14.734Z,1528893194.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:15.127Z,1528893195.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:33:15.128Z,1528893195.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:15.535Z,1528893195.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:33:15.536Z,1528893195.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:15.938Z,1528893195.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T12:33:15.939Z,1528893195.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:16.336Z,1528893196.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:33:16.337Z,1528893196.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:16.732Z,1528893196.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:33:16.733Z,1528893196.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:17.136Z,1528893197.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:33:17.137Z,1528893197.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:17.526Z,1528893197.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:33:17.527Z,1528893197.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:17.932Z,1528893197.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:33:17.933Z,1528893197.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:18.339Z,1528893198.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T12:33:18.340Z,1528893198.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:18.738Z,1528893198.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T12:33:18.739Z,1528893198.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:19.138Z,1528893199.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T12:33:19.139Z,1528893199.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:19.533Z,1528893199.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:33:19.534Z,1528893199.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:19.927Z,1528893199.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:33:19.928Z,1528893199.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:20.329Z,1528893200.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:33:20.330Z,1528893200.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:20.733Z,1528893200.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:33:20.734Z,1528893200.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:21.131Z,1528893201.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:33:21.132Z,1528893201.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:21.534Z,1528893201.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:33:21.535Z,1528893201.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:21.938Z,1528893201.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T12:33:21.939Z,1528893201.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:22.332Z,1528893202.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:33:22.333Z,1528893202.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:22.727Z,1528893202.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:33:22.728Z,1528893202.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:23.134Z,1528893203.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:33:23.135Z,1528893203.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:23.532Z,1528893203.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:33:23.533Z,1528893203.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:23.931Z,1528893203.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:24.339Z,1528893204.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:24.736Z,1528893204.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:25.136Z,1528893205.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:25.531Z,1528893205.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:25.932Z,1528893205.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:26.329Z,1528893206.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:26.734Z,1528893206.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:27.133Z,1528893207.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:27.536Z,1528893207.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:27.940Z,1528893207.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:28.340Z,1528893208.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:28.736Z,1528893208.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:29.131Z,1528893209.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:29.528Z,1528893209.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:29.931Z,1528893209.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:30.339Z,1528893210.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:30.748Z,1528893210.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:31.140Z,1528893211.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:31.542Z,1528893211.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:31.928Z,1528893211.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:32.330Z,1528893212.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:32.734Z,1528893212.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:33.130Z,1528893213.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:33.538Z,1528893213.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:33.945Z,1528893213.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:34.337Z,1528893214.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:34.733Z,1528893214.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:35.132Z,1528893215.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:35.536Z,1528893215.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:35.931Z,1528893215.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:36.348Z,1528893216.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:36.741Z,1528893216.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:37.144Z,1528893217.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:37.533Z,1528893217.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:37.930Z,1528893217.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:38.332Z,1528893218.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:38.732Z,1528893218.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:39.130Z,1528893219.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:39.542Z,1528893219.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:39.945Z,1528893219.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:40.340Z,1528893220.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:40.732Z,1528893220.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:41.132Z,1528893221.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:41.529Z,1528893221.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:41.932Z,1528893221.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:42.345Z,1528893222.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:42.748Z,1528893222.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:43.140Z,1528893223.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:43.531Z,1528893223.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:43.930Z,1528893223.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:44.336Z,1528893224.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:44.740Z,1528893224.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:45.136Z,1528893225.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:45.541Z,1528893225.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:45.948Z,1528893225.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:46.338Z,1528893226.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:46.732Z,1528893226.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:47.135Z,1528893227.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:47.533Z,1528893227.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:47.940Z,1528893227.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:48.352Z,1528893228.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:48.742Z,1528893228.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:49.145Z,1528893229.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:49.535Z,1528893229.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:49.932Z,1528893229.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:50.332Z,1528893230.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:50.735Z,1528893230.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:51.133Z,1528893231.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:51.490Z,1528893231.490 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T12:33:51.490Z,1528893231.490 [NAL9602] Data Fault, FailCount= 5
2018-06-13T12:33:51.490Z,1528893231.490 [NAL9602](ERROR): Data Fault
2018-06-13T12:33:51.550Z,1528893231.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:51.641Z,1528893231.641 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T12:33:51.641Z,1528893231.641 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T12:33:51.886Z,1528893231.886 [NAL9602](INFO): Powering down
2018-06-13T12:33:51.944Z,1528893231.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:52.031Z,1528893232.031 [CBIT](INFO): Critical error at 20180613T123351
2018-06-13T12:33:52.320Z,1528893232.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:52.744Z,1528893232.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:53.145Z,1528893233.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:53.527Z,1528893233.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:53.932Z,1528893233.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:54.327Z,1528893234.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:54.726Z,1528893234.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:55.126Z,1528893235.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:55.526Z,1528893235.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:55.927Z,1528893235.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:56.327Z,1528893236.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:56.732Z,1528893236.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:57.126Z,1528893237.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:57.531Z,1528893237.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:57.936Z,1528893237.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:58.325Z,1528893238.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:58.732Z,1528893238.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:59.130Z,1528893239.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:59.525Z,1528893239.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:33:59.932Z,1528893239.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:00.330Z,1528893240.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:00.726Z,1528893240.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:01.131Z,1528893241.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:01.529Z,1528893241.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:01.929Z,1528893241.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:02.331Z,1528893242.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:02.730Z,1528893242.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:03.126Z,1528893243.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:03.531Z,1528893243.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:03.929Z,1528893243.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:07.030Z,1528893247.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:07.176Z,1528893247.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:07.566Z,1528893247.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:07.964Z,1528893247.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:08.367Z,1528893248.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:08.767Z,1528893248.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:09.166Z,1528893249.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:09.566Z,1528893249.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:09.966Z,1528893249.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:10.366Z,1528893250.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:10.765Z,1528893250.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:11.166Z,1528893251.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:11.566Z,1528893251.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:11.965Z,1528893251.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:12.366Z,1528893252.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:12.766Z,1528893252.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:13.165Z,1528893253.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:13.567Z,1528893253.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:13.956Z,1528893253.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:14.370Z,1528893254.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:14.747Z,1528893254.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:15.147Z,1528893255.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:15.569Z,1528893255.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:15.973Z,1528893255.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:16.370Z,1528893256.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:16.769Z,1528893256.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:17.147Z,1528893257.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:17.547Z,1528893257.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:17.951Z,1528893257.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:18.352Z,1528893258.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:18.748Z,1528893258.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:19.172Z,1528893259.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:19.551Z,1528893259.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:19.952Z,1528893259.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:20.352Z,1528893260.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:20.751Z,1528893260.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:21.152Z,1528893261.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:21.556Z,1528893261.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:21.950Z,1528893261.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:22.355Z,1528893262.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:22.756Z,1528893262.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:23.152Z,1528893263.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:23.555Z,1528893263.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:23.960Z,1528893263.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:24.354Z,1528893264.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:24.755Z,1528893264.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:25.155Z,1528893265.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:25.550Z,1528893265.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:25.955Z,1528893265.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:26.355Z,1528893266.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:26.750Z,1528893266.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:27.155Z,1528893267.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:27.556Z,1528893267.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:27.951Z,1528893267.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:28.356Z,1528893268.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:28.755Z,1528893268.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:29.154Z,1528893269.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:29.556Z,1528893269.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:29.955Z,1528893269.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:30.354Z,1528893270.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:30.758Z,1528893270.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:31.155Z,1528893271.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:31.554Z,1528893271.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:31.955Z,1528893271.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:32.360Z,1528893272.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:32.755Z,1528893272.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:33.154Z,1528893273.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:33.555Z,1528893273.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:33.955Z,1528893273.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:34.360Z,1528893274.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:34.755Z,1528893274.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:35.154Z,1528893275.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:35.558Z,1528893275.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:35.960Z,1528893275.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:36.354Z,1528893276.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:36.754Z,1528893276.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:37.164Z,1528893277.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:37.560Z,1528893277.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:37.960Z,1528893277.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:38.355Z,1528893278.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:38.759Z,1528893278.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:39.158Z,1528893279.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:39.556Z,1528893279.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:39.955Z,1528893279.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:40.359Z,1528893280.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:40.760Z,1528893280.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:41.159Z,1528893281.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:41.555Z,1528893281.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:41.958Z,1528893281.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:42.376Z,1528893282.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:42.752Z,1528893282.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:43.164Z,1528893283.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:43.558Z,1528893283.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:43.971Z,1528893283.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:44.362Z,1528893284.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:44.758Z,1528893284.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:45.158Z,1528893285.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:45.564Z,1528893285.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:45.961Z,1528893285.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:46.362Z,1528893286.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:46.761Z,1528893286.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:47.162Z,1528893287.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:47.562Z,1528893287.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:47.960Z,1528893287.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:48.360Z,1528893288.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:48.758Z,1528893288.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:49.160Z,1528893289.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:49.560Z,1528893289.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:49.958Z,1528893289.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:50.363Z,1528893290.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:50.759Z,1528893290.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:51.158Z,1528893291.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:51.562Z,1528893291.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:51.960Z,1528893291.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:52.360Z,1528893292.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:52.760Z,1528893292.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:53.161Z,1528893293.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:53.560Z,1528893293.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:53.971Z,1528893293.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:54.361Z,1528893294.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:54.772Z,1528893294.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:55.180Z,1528893295.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:55.558Z,1528893295.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:55.957Z,1528893295.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:56.372Z,1528893296.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:56.758Z,1528893296.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:57.157Z,1528893297.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:57.562Z,1528893297.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:57.969Z,1528893297.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:58.361Z,1528893298.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:58.762Z,1528893298.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:59.159Z,1528893299.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:59.576Z,1528893299.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:34:59.963Z,1528893299.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:00.358Z,1528893300.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:00.757Z,1528893300.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:01.176Z,1528893301.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:01.561Z,1528893301.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:01.958Z,1528893301.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:02.361Z,1528893302.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:02.770Z,1528893302.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:03.159Z,1528893303.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:03.564Z,1528893303.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:03.961Z,1528893303.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:04.376Z,1528893304.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:04.764Z,1528893304.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:05.162Z,1528893305.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:05.564Z,1528893305.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:05.975Z,1528893305.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:06.362Z,1528893306.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:06.762Z,1528893306.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:09.875Z,1528893309.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:09.878Z,1528893309.878 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T12:30:06.8Z
2018-06-13T12:35:09.878Z,1528893309.878 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T12:35:09.879Z,1528893309.879 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T12:35:10.040Z,1528893310.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:11.202Z,1528893311.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:11.363Z,1528893311.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:11.753Z,1528893311.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:12.154Z,1528893312.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:12.554Z,1528893312.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:12.953Z,1528893312.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:13.355Z,1528893313.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:16.470Z,1528893316.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:16.557Z,1528893316.557 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0212.lzma
2018-06-13T12:35:16.632Z,1528893316.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:17.006Z,1528893317.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:17.358Z,1528893317.358 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0212.lzma.bak
2018-06-13T12:35:17.358Z,1528893317.358 [DataOverHttps](INFO): SBD MOMSN=8329227
2018-06-13T12:35:17.419Z,1528893317.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:19.302Z,1528893319.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:19.463Z,1528893319.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:22.574Z,1528893322.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:22.759Z,1528893322.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:23.132Z,1528893323.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:23.536Z,1528893323.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:23.930Z,1528893323.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:24.356Z,1528893324.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:27.461Z,1528893327.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:27.550Z,1528893327.550 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180613T032335/Express0213.lzma
2018-06-13T12:35:27.623Z,1528893327.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:28.006Z,1528893328.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:28.350Z,1528893328.350 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0213.lzma.bak
2018-06-13T12:35:28.350Z,1528893328.350 [DataOverHttps](INFO): SBD MOMSN=8329230
2018-06-13T12:35:28.424Z,1528893328.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:30.308Z,1528893330.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:30.311Z,1528893330.311 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T12:35:30.311Z,1528893330.311 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T12:35:30.311Z,1528893330.311 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T12:35:30.458Z,1528893330.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:30.863Z,1528893330.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:31.236Z,1528893331.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:31.660Z,1528893331.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:34.769Z,1528893334.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:34.926Z,1528893334.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:35.322Z,1528893335.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:35.718Z,1528893335.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:36.119Z,1528893336.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:36.519Z,1528893336.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:36.918Z,1528893336.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:37.327Z,1528893337.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:37.728Z,1528893337.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:38.119Z,1528893338.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:38.519Z,1528893338.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:38.919Z,1528893338.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:39.318Z,1528893339.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:39.716Z,1528893339.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:40.119Z,1528893340.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:40.516Z,1528893340.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:40.916Z,1528893340.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:41.317Z,1528893341.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:41.728Z,1528893341.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:42.127Z,1528893342.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:42.519Z,1528893342.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:42.919Z,1528893342.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:43.320Z,1528893343.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:43.728Z,1528893343.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:44.107Z,1528893344.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:44.508Z,1528893344.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:44.912Z,1528893344.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:45.307Z,1528893345.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:45.708Z,1528893345.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:46.112Z,1528893346.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:46.542Z,1528893346.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:46.914Z,1528893346.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:47.431Z,1528893347.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:47.772Z,1528893347.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:48.140Z,1528893348.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:48.541Z,1528893348.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:48.908Z,1528893348.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:49.308Z,1528893349.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:49.732Z,1528893349.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:50.107Z,1528893350.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:50.512Z,1528893350.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:50.921Z,1528893350.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:51.312Z,1528893351.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:51.715Z,1528893351.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:51.793Z,1528893351.793 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T12:35:51.793Z,1528893351.793 [NAL9602] No Fault, FailCount= 5
2018-06-13T12:35:52.074Z,1528893352.074 [NAL9602](INFO): Powering up NAL9602
2018-06-13T12:35:52.123Z,1528893352.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:52.520Z,1528893352.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:52.913Z,1528893352.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:53.460Z,1528893353.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:53.718Z,1528893353.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:54.113Z,1528893354.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:54.518Z,1528893354.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:54.913Z,1528893354.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:55.313Z,1528893355.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:55.719Z,1528893355.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:56.113Z,1528893356.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:56.514Z,1528893356.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:56.917Z,1528893356.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:57.313Z,1528893357.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:57.714Z,1528893357.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:58.118Z,1528893358.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:58.515Z,1528893358.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:58.914Z,1528893358.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:59.318Z,1528893359.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:35:59.713Z,1528893359.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:00.114Z,1528893360.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:00.524Z,1528893360.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:00.913Z,1528893360.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:01.315Z,1528893361.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:01.720Z,1528893361.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:02.113Z,1528893362.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:02.519Z,1528893362.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:02.924Z,1528893362.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:03.278Z,1528893363.278 [NAL9602](INFO): NAL9602 initialized
2018-06-13T12:36:03.323Z,1528893363.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:03.718Z,1528893363.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:04.127Z,1528893364.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:04.524Z,1528893364.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:04.924Z,1528893364.924 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:04.924Z,1528893364.924 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 183
2018-06-13T12:36:04.924Z,1528893364.924 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:36:04.926Z,1528893364.926 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:04.926Z,1528893364.926 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 183
2018-06-13T12:36:04.926Z,1528893364.926 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:36:04.928Z,1528893364.928 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:04.928Z,1528893364.928 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 183
2018-06-13T12:36:04.928Z,1528893364.928 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:36:05.021Z,1528893365.021 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:36:05.021Z,1528893365.021 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:36:05.022Z,1528893365.022 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:36:05.401Z,1528893365.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:36:05.401Z,1528893365.401 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 183
2018-06-13T12:36:05.402Z,1528893365.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:36:05.402Z,1528893365.402 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 183
2018-06-13T12:36:05.402Z,1528893365.402 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:36:05.403Z,1528893365.403 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 183
2018-06-13T12:36:05.720Z,1528893365.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:36:05.720Z,1528893365.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:36:05.721Z,1528893365.721 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:36:05.721Z,1528893365.721 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:36:05.722Z,1528893365.722 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:36:05.722Z,1528893365.722 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:36:05.722Z,1528893365.722 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:36:05.723Z,1528893365.723 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:36:05.723Z,1528893365.723 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:36:06.124Z,1528893366.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:36:06.125Z,1528893366.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:06.521Z,1528893366.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:36:06.522Z,1528893366.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:06.928Z,1528893366.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:36:06.929Z,1528893366.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:07.331Z,1528893367.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:36:07.332Z,1528893367.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:07.732Z,1528893367.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:36:07.733Z,1528893367.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:08.120Z,1528893368.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:36:08.121Z,1528893368.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:08.518Z,1528893368.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:36:08.519Z,1528893368.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:08.921Z,1528893368.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:36:08.922Z,1528893368.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:09.327Z,1528893369.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T12:36:09.328Z,1528893369.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:09.718Z,1528893369.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:36:09.719Z,1528893369.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:10.136Z,1528893370.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:36:10.141Z,1528893370.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:10.540Z,1528893370.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:36:10.541Z,1528893370.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:10.927Z,1528893370.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:36:10.928Z,1528893370.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:11.321Z,1528893371.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T12:36:11.322Z,1528893371.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:11.732Z,1528893371.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T12:36:11.733Z,1528893371.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:12.122Z,1528893372.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T12:36:12.122Z,1528893372.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:12.521Z,1528893372.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:36:12.522Z,1528893372.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:12.925Z,1528893372.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:36:12.926Z,1528893372.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:13.336Z,1528893373.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T12:36:13.337Z,1528893373.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:13.740Z,1528893373.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:36:13.740Z,1528893373.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:14.127Z,1528893374.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:36:14.127Z,1528893374.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:14.520Z,1528893374.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:36:14.520Z,1528893374.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:14.932Z,1528893374.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:36:14.932Z,1528893374.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:15.322Z,1528893375.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:36:15.323Z,1528893375.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:15.722Z,1528893375.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:36:15.723Z,1528893375.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:16.134Z,1528893376.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:36:16.135Z,1528893376.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:16.540Z,1528893376.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:36:16.541Z,1528893376.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:16.935Z,1528893376.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:36:16.935Z,1528893376.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:17.327Z,1528893377.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:36:17.328Z,1528893377.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:17.726Z,1528893377.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:36:17.727Z,1528893377.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:18.127Z,1528893378.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:36:18.128Z,1528893378.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:18.525Z,1528893378.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:36:18.526Z,1528893378.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:18.936Z,1528893378.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:36:18.937Z,1528893378.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:19.334Z,1528893379.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:36:19.335Z,1528893379.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:19.739Z,1528893379.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T12:36:19.740Z,1528893379.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:20.131Z,1528893380.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:36:20.132Z,1528893380.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:20.532Z,1528893380.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:36:20.534Z,1528893380.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:20.927Z,1528893380.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:36:20.928Z,1528893380.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:21.332Z,1528893381.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:36:21.333Z,1528893381.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:21.728Z,1528893381.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:36:21.730Z,1528893381.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:22.134Z,1528893382.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:36:22.135Z,1528893382.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:22.536Z,1528893382.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:36:22.537Z,1528893382.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:22.927Z,1528893382.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:36:22.928Z,1528893382.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:23.330Z,1528893383.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:36:23.331Z,1528893383.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:23.736Z,1528893383.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:36:23.737Z,1528893383.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:24.125Z,1528893384.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:36:24.126Z,1528893384.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:24.538Z,1528893384.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:36:24.539Z,1528893384.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:24.940Z,1528893384.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:25.338Z,1528893385.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:25.741Z,1528893385.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:26.111Z,1528893386.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:26.512Z,1528893386.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:26.911Z,1528893386.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:27.313Z,1528893387.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:27.715Z,1528893387.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:28.142Z,1528893388.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:28.552Z,1528893388.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:28.942Z,1528893388.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:29.318Z,1528893389.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:29.720Z,1528893389.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:30.121Z,1528893390.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:30.515Z,1528893390.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:30.945Z,1528893390.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:34.043Z,1528893394.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:34.199Z,1528893394.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:34.585Z,1528893394.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:34.992Z,1528893394.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:35.405Z,1528893395.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:35.806Z,1528893395.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:36.205Z,1528893396.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:36.607Z,1528893396.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:37.008Z,1528893397.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:37.377Z,1528893397.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:37.809Z,1528893397.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:38.211Z,1528893398.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:38.608Z,1528893398.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:38.988Z,1528893398.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:39.388Z,1528893399.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:39.791Z,1528893399.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:40.217Z,1528893400.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:40.595Z,1528893400.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:40.987Z,1528893400.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:41.387Z,1528893401.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:41.791Z,1528893401.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:42.190Z,1528893402.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:42.591Z,1528893402.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:42.993Z,1528893402.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:43.383Z,1528893403.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:43.787Z,1528893403.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:44.198Z,1528893404.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:44.596Z,1528893404.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:44.996Z,1528893404.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:45.385Z,1528893405.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:45.787Z,1528893405.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:46.188Z,1528893406.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:46.592Z,1528893406.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:46.998Z,1528893406.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:47.401Z,1528893407.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:47.795Z,1528893407.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:48.198Z,1528893408.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:48.588Z,1528893408.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:48.990Z,1528893408.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:49.386Z,1528893409.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:49.796Z,1528893409.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:50.198Z,1528893410.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:50.598Z,1528893410.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:50.994Z,1528893410.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:51.393Z,1528893411.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:51.788Z,1528893411.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:52.189Z,1528893412.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:52.588Z,1528893412.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:52.999Z,1528893412.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:53.396Z,1528893413.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:53.798Z,1528893413.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:54.192Z,1528893414.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:54.593Z,1528893414.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:54.994Z,1528893414.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:55.394Z,1528893415.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:55.794Z,1528893415.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:56.198Z,1528893416.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:56.599Z,1528893416.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:56.998Z,1528893416.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:57.394Z,1528893417.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:57.788Z,1528893417.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:58.200Z,1528893418.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:58.600Z,1528893418.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:59.000Z,1528893419.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:59.405Z,1528893419.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:36:59.808Z,1528893419.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:00.193Z,1528893420.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:00.578Z,1528893420.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:00.977Z,1528893420.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:01.381Z,1528893421.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:01.785Z,1528893421.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:02.192Z,1528893422.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:02.588Z,1528893422.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:02.996Z,1528893422.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:03.384Z,1528893423.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:03.782Z,1528893423.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:04.182Z,1528893424.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:04.585Z,1528893424.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:04.991Z,1528893424.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:05.418Z,1528893425.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:05.787Z,1528893425.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:06.184Z,1528893426.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:06.588Z,1528893426.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:06.986Z,1528893426.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:07.384Z,1528893427.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:07.786Z,1528893427.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:08.191Z,1528893428.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:08.592Z,1528893428.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:08.991Z,1528893428.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:09.387Z,1528893429.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:09.782Z,1528893429.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:10.187Z,1528893430.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:10.582Z,1528893430.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:10.998Z,1528893430.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:11.394Z,1528893431.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:11.800Z,1528893431.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:12.188Z,1528893432.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:12.586Z,1528893432.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:12.985Z,1528893432.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:13.387Z,1528893433.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:13.787Z,1528893433.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:14.194Z,1528893434.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:14.595Z,1528893434.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:14.999Z,1528893434.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:15.382Z,1528893435.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:15.784Z,1528893435.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:16.188Z,1528893436.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:16.585Z,1528893436.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:16.995Z,1528893436.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:17.417Z,1528893437.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:17.796Z,1528893437.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:18.186Z,1528893438.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:18.587Z,1528893438.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:18.987Z,1528893438.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:19.388Z,1528893439.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:19.786Z,1528893439.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:20.191Z,1528893440.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:20.595Z,1528893440.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:20.994Z,1528893440.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:21.385Z,1528893441.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:21.788Z,1528893441.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:22.200Z,1528893442.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:22.598Z,1528893442.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:22.996Z,1528893442.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:23.396Z,1528893443.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:23.797Z,1528893443.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:24.189Z,1528893444.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:24.594Z,1528893444.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:24.987Z,1528893444.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:25.412Z,1528893445.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:25.804Z,1528893445.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:26.226Z,1528893446.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:26.605Z,1528893446.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:27.000Z,1528893447.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:27.398Z,1528893447.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:27.802Z,1528893447.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:28.189Z,1528893448.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:28.604Z,1528893448.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:29.002Z,1528893449.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:29.404Z,1528893449.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:29.802Z,1528893449.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:30.205Z,1528893450.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:30.594Z,1528893450.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:30.999Z,1528893450.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:31.395Z,1528893451.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:31.802Z,1528893451.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:32.205Z,1528893452.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:35.303Z,1528893455.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:35.484Z,1528893455.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:35.854Z,1528893455.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:36.258Z,1528893456.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:36.656Z,1528893456.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:37.061Z,1528893457.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:37.464Z,1528893457.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:37.860Z,1528893457.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:38.254Z,1528893458.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:38.652Z,1528893458.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:39.051Z,1528893459.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:39.452Z,1528893459.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:39.860Z,1528893459.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:40.259Z,1528893460.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:40.660Z,1528893460.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:41.064Z,1528893461.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:41.460Z,1528893461.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:41.855Z,1528893461.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:42.260Z,1528893462.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:42.652Z,1528893462.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:43.059Z,1528893463.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:43.463Z,1528893463.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:43.860Z,1528893463.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:44.255Z,1528893464.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:44.654Z,1528893464.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:45.054Z,1528893465.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:45.468Z,1528893465.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:45.852Z,1528893465.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:46.263Z,1528893466.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:46.663Z,1528893466.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:47.060Z,1528893467.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:47.447Z,1528893467.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:47.856Z,1528893467.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:48.256Z,1528893468.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:48.654Z,1528893468.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:49.064Z,1528893469.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:49.460Z,1528893469.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:49.864Z,1528893469.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:50.256Z,1528893470.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:50.648Z,1528893470.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:51.056Z,1528893471.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:51.455Z,1528893471.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:51.852Z,1528893471.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:52.264Z,1528893472.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:52.663Z,1528893472.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:53.061Z,1528893473.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:53.455Z,1528893473.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:53.853Z,1528893473.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:54.257Z,1528893474.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:54.668Z,1528893474.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:55.064Z,1528893475.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:55.464Z,1528893475.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:55.880Z,1528893475.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:56.258Z,1528893476.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:56.654Z,1528893476.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:57.055Z,1528893477.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:57.457Z,1528893477.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:57.855Z,1528893477.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:58.264Z,1528893478.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:58.668Z,1528893478.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:59.067Z,1528893479.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:59.460Z,1528893479.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:37:59.856Z,1528893479.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:00.257Z,1528893480.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:00.657Z,1528893480.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:01.066Z,1528893481.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:01.468Z,1528893481.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:01.868Z,1528893481.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:02.259Z,1528893482.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:02.659Z,1528893482.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:03.055Z,1528893483.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:03.457Z,1528893483.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:03.868Z,1528893483.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:04.290Z,1528893484.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:04.672Z,1528893484.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:05.062Z,1528893485.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:05.476Z,1528893485.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:05.873Z,1528893485.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:06.258Z,1528893486.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:06.657Z,1528893486.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:07.066Z,1528893487.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:07.466Z,1528893487.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:07.869Z,1528893487.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:08.259Z,1528893488.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:08.659Z,1528893488.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:09.070Z,1528893489.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:09.464Z,1528893489.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:09.859Z,1528893489.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:10.276Z,1528893490.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:10.675Z,1528893490.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:11.069Z,1528893491.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:11.468Z,1528893491.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:11.876Z,1528893491.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:12.262Z,1528893492.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:12.667Z,1528893492.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:13.066Z,1528893493.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:13.470Z,1528893493.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:13.882Z,1528893493.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:14.264Z,1528893494.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:14.657Z,1528893494.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:15.075Z,1528893495.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:15.455Z,1528893495.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:15.866Z,1528893495.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:16.280Z,1528893496.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:16.676Z,1528893496.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:17.071Z,1528893497.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:17.449Z,1528893497.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:17.852Z,1528893497.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:18.284Z,1528893498.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:18.648Z,1528893498.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:19.077Z,1528893499.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:19.477Z,1528893499.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:19.880Z,1528893499.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:20.256Z,1528893500.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:20.654Z,1528893500.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:21.060Z,1528893501.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:21.479Z,1528893501.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:21.851Z,1528893501.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:22.282Z,1528893502.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:22.677Z,1528893502.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:23.083Z,1528893503.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:23.452Z,1528893503.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:23.870Z,1528893503.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:24.259Z,1528893504.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:24.685Z,1528893504.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:25.085Z,1528893505.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:25.466Z,1528893505.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:25.865Z,1528893505.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:26.268Z,1528893506.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:26.652Z,1528893506.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:27.063Z,1528893507.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:27.459Z,1528893507.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:27.848Z,1528893507.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:28.262Z,1528893508.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:28.668Z,1528893508.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:29.065Z,1528893509.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:29.468Z,1528893509.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:29.851Z,1528893509.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:30.254Z,1528893510.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:30.660Z,1528893510.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:31.064Z,1528893511.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:31.462Z,1528893511.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:31.863Z,1528893511.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:32.259Z,1528893512.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:35.357Z,1528893515.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:35.493Z,1528893515.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:35.920Z,1528893515.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:36.338Z,1528893516.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:36.699Z,1528893516.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:37.095Z,1528893517.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:37.503Z,1528893517.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:37.876Z,1528893517.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:38.303Z,1528893518.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:38.713Z,1528893518.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:39.116Z,1528893519.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:39.482Z,1528893519.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:39.881Z,1528893519.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:40.308Z,1528893520.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:40.716Z,1528893520.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:41.112Z,1528893521.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:41.496Z,1528893521.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:41.890Z,1528893521.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:42.314Z,1528893522.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:42.692Z,1528893522.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:43.087Z,1528893523.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:43.485Z,1528893523.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:43.881Z,1528893523.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:44.288Z,1528893524.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:44.692Z,1528893524.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:45.092Z,1528893525.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:45.515Z,1528893525.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:45.884Z,1528893525.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:46.305Z,1528893526.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:46.692Z,1528893526.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:47.091Z,1528893527.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:47.491Z,1528893527.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:47.891Z,1528893527.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:48.289Z,1528893528.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:48.688Z,1528893528.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:49.083Z,1528893529.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:49.480Z,1528893529.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:49.889Z,1528893529.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:50.296Z,1528893530.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:50.691Z,1528893530.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:51.089Z,1528893531.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:51.490Z,1528893531.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:51.880Z,1528893531.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:52.288Z,1528893532.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:52.685Z,1528893532.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:53.099Z,1528893533.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:53.500Z,1528893533.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:53.900Z,1528893533.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:54.294Z,1528893534.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:54.687Z,1528893534.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:55.096Z,1528893535.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:55.491Z,1528893535.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:55.889Z,1528893535.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:56.299Z,1528893536.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:56.694Z,1528893536.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:57.094Z,1528893537.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:57.488Z,1528893537.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:57.899Z,1528893537.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:58.286Z,1528893538.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:58.695Z,1528893538.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:59.095Z,1528893539.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:59.502Z,1528893539.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:38:59.898Z,1528893539.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:00.288Z,1528893540.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:00.696Z,1528893540.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:01.088Z,1528893541.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:01.493Z,1528893541.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:01.877Z,1528893541.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:02.308Z,1528893542.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:02.709Z,1528893542.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:03.106Z,1528893543.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:03.480Z,1528893543.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:03.876Z,1528893543.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:04.282Z,1528893544.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:04.683Z,1528893544.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:05.087Z,1528893545.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:05.489Z,1528893545.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:05.888Z,1528893545.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:05.888Z,1528893545.888 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 184
2018-06-13T12:39:05.889Z,1528893545.889 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:39:05.890Z,1528893545.890 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:05.891Z,1528893545.891 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 184
2018-06-13T12:39:05.891Z,1528893545.891 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:39:05.892Z,1528893545.892 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:05.892Z,1528893545.892 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 184
2018-06-13T12:39:05.892Z,1528893545.892 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:39:05.985Z,1528893545.985 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:39:05.985Z,1528893545.985 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:39:05.986Z,1528893545.986 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:39:06.357Z,1528893546.357 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:39:06.357Z,1528893546.357 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 184
2018-06-13T12:39:06.357Z,1528893546.357 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:39:06.357Z,1528893546.357 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 184
2018-06-13T12:39:06.358Z,1528893546.358 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:39:06.358Z,1528893546.358 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 184
2018-06-13T12:39:06.694Z,1528893546.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:39:06.695Z,1528893546.695 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:39:06.695Z,1528893546.695 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:39:06.695Z,1528893546.695 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:39:06.696Z,1528893546.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:39:06.696Z,1528893546.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:39:06.697Z,1528893546.697 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:39:06.697Z,1528893546.697 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:39:06.697Z,1528893546.697 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:39:07.095Z,1528893547.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:39:07.096Z,1528893547.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:07.493Z,1528893547.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:39:07.494Z,1528893547.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:07.888Z,1528893547.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:39:07.893Z,1528893547.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:08.304Z,1528893548.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:39:08.305Z,1528893548.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:08.695Z,1528893548.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:39:08.696Z,1528893548.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:09.096Z,1528893549.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:39:09.098Z,1528893549.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:09.495Z,1528893549.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:39:09.496Z,1528893549.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:09.880Z,1528893549.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:39:09.885Z,1528893549.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:10.294Z,1528893550.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T12:39:10.295Z,1528893550.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:10.675Z,1528893550.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:39:10.676Z,1528893550.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:11.103Z,1528893551.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:39:11.104Z,1528893551.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:11.503Z,1528893551.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:39:11.504Z,1528893551.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:11.906Z,1528893551.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:39:11.907Z,1528893551.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:12.280Z,1528893552.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T12:39:12.281Z,1528893552.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:12.679Z,1528893552.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T12:39:12.680Z,1528893552.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:13.078Z,1528893553.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T12:39:13.079Z,1528893553.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:13.476Z,1528893553.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:39:13.477Z,1528893553.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:13.879Z,1528893553.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:39:13.880Z,1528893553.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:14.289Z,1528893554.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T12:39:14.290Z,1528893554.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:14.686Z,1528893554.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:39:14.687Z,1528893554.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:15.087Z,1528893555.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:39:15.088Z,1528893555.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:15.480Z,1528893555.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:39:15.481Z,1528893555.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:15.879Z,1528893555.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:39:15.880Z,1528893555.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:16.284Z,1528893556.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:39:16.284Z,1528893556.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:16.681Z,1528893556.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:39:16.682Z,1528893556.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:17.088Z,1528893557.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:39:17.089Z,1528893557.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:17.496Z,1528893557.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:39:17.497Z,1528893557.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:17.891Z,1528893557.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:39:17.892Z,1528893557.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:18.288Z,1528893558.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:39:18.289Z,1528893558.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:18.683Z,1528893558.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:39:18.684Z,1528893558.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:19.091Z,1528893559.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:39:19.092Z,1528893559.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:19.483Z,1528893559.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:39:19.484Z,1528893559.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:19.888Z,1528893559.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:39:19.889Z,1528893559.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:20.291Z,1528893560.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:39:20.292Z,1528893560.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:20.692Z,1528893560.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T12:39:20.693Z,1528893560.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:21.090Z,1528893561.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:39:21.091Z,1528893561.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:21.487Z,1528893561.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:39:21.488Z,1528893561.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:21.883Z,1528893561.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:39:21.884Z,1528893561.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:22.284Z,1528893562.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:39:22.285Z,1528893562.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:22.681Z,1528893562.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:39:22.682Z,1528893562.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:23.093Z,1528893563.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:39:23.094Z,1528893563.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:23.496Z,1528893563.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:39:23.497Z,1528893563.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:23.891Z,1528893563.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:39:23.892Z,1528893563.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:24.283Z,1528893564.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:39:24.284Z,1528893564.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:24.688Z,1528893564.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:39:24.689Z,1528893564.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:25.092Z,1528893565.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:39:25.093Z,1528893565.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:25.496Z,1528893565.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:39:25.497Z,1528893565.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:25.896Z,1528893565.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:26.285Z,1528893566.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:26.683Z,1528893566.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:27.096Z,1528893567.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:27.496Z,1528893567.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:27.900Z,1528893567.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:28.287Z,1528893568.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:28.694Z,1528893568.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:29.096Z,1528893569.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:29.496Z,1528893569.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:29.892Z,1528893569.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:30.286Z,1528893570.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:30.692Z,1528893570.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:31.091Z,1528893571.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:34.195Z,1528893574.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:34.376Z,1528893574.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:34.744Z,1528893574.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:35.144Z,1528893575.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:35.541Z,1528893575.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:35.942Z,1528893575.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:36.370Z,1528893576.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:36.754Z,1528893576.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:37.147Z,1528893577.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:37.548Z,1528893577.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:37.944Z,1528893577.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:38.354Z,1528893578.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:38.745Z,1528893578.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:39.151Z,1528893579.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:39.582Z,1528893579.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:39.951Z,1528893579.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:40.344Z,1528893580.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:40.755Z,1528893580.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:41.144Z,1528893581.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:41.548Z,1528893581.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:41.945Z,1528893581.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:42.352Z,1528893582.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:42.760Z,1528893582.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:43.156Z,1528893583.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:43.545Z,1528893583.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:43.943Z,1528893583.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:44.351Z,1528893584.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:44.743Z,1528893584.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:45.157Z,1528893585.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:45.556Z,1528893585.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:45.956Z,1528893585.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:46.348Z,1528893586.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:46.742Z,1528893586.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:47.144Z,1528893587.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:47.543Z,1528893587.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:47.943Z,1528893587.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:48.353Z,1528893588.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:48.760Z,1528893588.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:49.154Z,1528893589.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:49.543Z,1528893589.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:49.947Z,1528893589.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:50.358Z,1528893590.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:50.743Z,1528893590.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:51.152Z,1528893591.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:51.557Z,1528893591.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:51.957Z,1528893591.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:52.346Z,1528893592.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:52.752Z,1528893592.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:53.142Z,1528893593.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:53.552Z,1528893593.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:53.949Z,1528893593.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:54.356Z,1528893594.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:54.757Z,1528893594.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:55.158Z,1528893595.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:55.541Z,1528893595.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:55.944Z,1528893595.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:56.346Z,1528893596.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:56.741Z,1528893596.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:57.154Z,1528893597.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:57.556Z,1528893597.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:57.953Z,1528893597.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:58.345Z,1528893598.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:58.748Z,1528893598.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:59.154Z,1528893599.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:59.557Z,1528893599.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:39:59.953Z,1528893599.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:00.353Z,1528893600.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:00.752Z,1528893600.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:01.164Z,1528893601.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:01.555Z,1528893601.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:01.960Z,1528893601.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:02.345Z,1528893602.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:02.732Z,1528893602.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:03.155Z,1528893603.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:03.557Z,1528893603.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:03.965Z,1528893603.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:04.353Z,1528893604.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:04.740Z,1528893604.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:05.163Z,1528893605.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:05.563Z,1528893605.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:05.968Z,1528893605.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:06.339Z,1528893606.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:06.744Z,1528893606.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:07.151Z,1528893607.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:07.547Z,1528893607.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:07.947Z,1528893607.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:08.342Z,1528893608.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:08.740Z,1528893608.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:09.151Z,1528893609.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:09.551Z,1528893609.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:09.947Z,1528893609.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:10.342Z,1528893610.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:10.742Z,1528893610.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:11.147Z,1528893611.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:11.551Z,1528893611.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:11.947Z,1528893611.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:12.339Z,1528893612.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:12.741Z,1528893612.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:13.147Z,1528893613.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:13.551Z,1528893613.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:13.947Z,1528893613.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:14.345Z,1528893614.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:14.739Z,1528893614.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:15.151Z,1528893615.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:15.552Z,1528893615.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:15.950Z,1528893615.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:16.344Z,1528893616.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:16.743Z,1528893616.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:17.148Z,1528893617.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:17.555Z,1528893617.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:17.951Z,1528893617.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:18.341Z,1528893618.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:18.744Z,1528893618.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:19.149Z,1528893619.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:19.548Z,1528893619.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:19.952Z,1528893619.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:20.354Z,1528893620.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:20.740Z,1528893620.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:21.152Z,1528893621.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:21.556Z,1528893621.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:21.953Z,1528893621.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:22.344Z,1528893622.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:22.745Z,1528893622.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:23.152Z,1528893623.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:23.555Z,1528893623.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:23.956Z,1528893623.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:24.344Z,1528893624.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:24.742Z,1528893624.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:25.153Z,1528893625.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:25.556Z,1528893625.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:25.953Z,1528893625.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:26.347Z,1528893626.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:26.748Z,1528893626.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:27.164Z,1528893627.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:27.556Z,1528893627.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:27.959Z,1528893627.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:28.341Z,1528893628.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:28.752Z,1528893628.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:29.155Z,1528893629.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:29.557Z,1528893629.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:29.954Z,1528893629.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:30.358Z,1528893630.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:30.756Z,1528893630.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:30.759Z,1528893630.759 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T12:40:30.759Z,1528893630.759 [Default:CheckIn:C.Wait] Stopped
2018-06-13T12:40:30.759Z,1528893630.759 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T12:40:30.759Z,1528893630.759 [Default:CheckIn:D] Running Loop=1
2018-06-13T12:40:31.158Z,1528893631.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:31.161Z,1528893631.161 [Default:CheckIn:D] Stopped
2018-06-13T12:40:31.161Z,1528893631.161 [Default:CheckIn:E] Running Loop=1
2018-06-13T12:40:31.559Z,1528893631.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:31.563Z,1528893631.563 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 553.295247 min 
2018-06-13T12:40:31.563Z,1528893631.563 [Default:CheckIn:E] Stopped
2018-06-13T12:40:31.563Z,1528893631.563 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T12:40:31.563Z,1528893631.563 [Default:CheckIn] Stopped
2018-06-13T12:40:31.563Z,1528893631.563 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T12:40:31.563Z,1528893631.563 [Default:CheckIn](INFO): Running loop #54
2018-06-13T12:40:31.563Z,1528893631.563 [Default:CheckIn] Running Loop=54
2018-06-13T12:40:31.564Z,1528893631.564 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T12:40:31.564Z,1528893631.564 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T12:40:31.957Z,1528893631.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:32.350Z,1528893632.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:32.753Z,1528893632.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:33.158Z,1528893633.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:33.557Z,1528893633.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:33.958Z,1528893633.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:34.349Z,1528893634.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:34.750Z,1528893634.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:37.868Z,1528893637.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:38.047Z,1528893638.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:38.427Z,1528893638.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:38.820Z,1528893638.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:39.215Z,1528893639.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:39.616Z,1528893639.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:40.011Z,1528893640.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:40.420Z,1528893640.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:40.824Z,1528893640.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:41.220Z,1528893641.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:41.614Z,1528893641.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:42.016Z,1528893642.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:42.416Z,1528893642.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:42.816Z,1528893642.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:43.220Z,1528893643.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:43.620Z,1528893643.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:44.023Z,1528893644.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:44.415Z,1528893644.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:44.812Z,1528893644.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:45.228Z,1528893645.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:45.627Z,1528893645.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:46.024Z,1528893646.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:46.417Z,1528893646.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:46.817Z,1528893646.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:47.224Z,1528893647.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:47.628Z,1528893647.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:48.024Z,1528893648.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:48.412Z,1528893648.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:48.820Z,1528893648.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:49.224Z,1528893649.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:49.624Z,1528893649.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:50.023Z,1528893650.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:50.417Z,1528893650.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:50.811Z,1528893650.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:51.228Z,1528893651.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:51.625Z,1528893651.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:52.024Z,1528893652.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:52.430Z,1528893652.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:52.817Z,1528893652.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:53.225Z,1528893653.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:53.632Z,1528893653.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:54.028Z,1528893654.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:54.415Z,1528893654.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:54.816Z,1528893654.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:55.225Z,1528893655.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:55.624Z,1528893655.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:56.028Z,1528893656.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:56.419Z,1528893656.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:56.813Z,1528893656.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:57.228Z,1528893657.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:57.627Z,1528893657.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:58.025Z,1528893658.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:58.416Z,1528893658.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:58.817Z,1528893658.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:59.226Z,1528893659.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:40:59.627Z,1528893659.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:00.025Z,1528893660.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:00.414Z,1528893660.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:00.815Z,1528893660.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:01.232Z,1528893661.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:01.626Z,1528893661.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:02.032Z,1528893662.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:02.420Z,1528893662.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:02.825Z,1528893662.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:03.225Z,1528893663.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:03.631Z,1528893663.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:04.027Z,1528893664.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:04.418Z,1528893664.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:04.819Z,1528893664.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:05.226Z,1528893665.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:05.630Z,1528893665.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:06.026Z,1528893666.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:06.415Z,1528893666.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:06.819Z,1528893666.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:07.226Z,1528893667.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:07.626Z,1528893667.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:08.026Z,1528893668.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:08.418Z,1528893668.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:08.818Z,1528893668.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:09.224Z,1528893669.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:09.628Z,1528893669.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:10.026Z,1528893670.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:10.415Z,1528893670.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:10.818Z,1528893670.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:11.225Z,1528893671.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:11.640Z,1528893671.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:12.025Z,1528893672.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:12.422Z,1528893672.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:12.817Z,1528893672.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:13.230Z,1528893673.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:13.627Z,1528893673.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:14.029Z,1528893674.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:14.418Z,1528893674.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:14.818Z,1528893674.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:15.233Z,1528893675.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:15.631Z,1528893675.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:16.026Z,1528893676.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:16.428Z,1528893676.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:16.817Z,1528893676.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:17.226Z,1528893677.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:17.630Z,1528893677.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:18.020Z,1528893678.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:18.423Z,1528893678.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:18.817Z,1528893678.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:19.223Z,1528893679.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:19.625Z,1528893679.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:20.032Z,1528893680.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:20.424Z,1528893680.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:20.817Z,1528893680.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:21.228Z,1528893681.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:21.626Z,1528893681.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:22.013Z,1528893682.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:22.427Z,1528893682.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:22.830Z,1528893682.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:23.240Z,1528893683.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:23.608Z,1528893683.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:24.008Z,1528893684.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:24.405Z,1528893684.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:24.805Z,1528893684.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:25.205Z,1528893685.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:25.631Z,1528893685.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:26.036Z,1528893686.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:26.436Z,1528893686.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:26.807Z,1528893686.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:27.207Z,1528893687.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:27.611Z,1528893687.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:28.008Z,1528893688.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:28.436Z,1528893688.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:28.836Z,1528893688.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:29.237Z,1528893689.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:29.611Z,1528893689.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:30.011Z,1528893690.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:30.411Z,1528893690.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:30.841Z,1528893690.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:31.243Z,1528893691.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:31.641Z,1528893691.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:32.040Z,1528893692.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:32.443Z,1528893692.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:32.813Z,1528893692.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:33.212Z,1528893693.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:33.612Z,1528893693.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:34.012Z,1528893694.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:34.439Z,1528893694.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:34.848Z,1528893694.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:37.943Z,1528893697.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:38.119Z,1528893698.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:38.517Z,1528893698.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:38.913Z,1528893698.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:39.322Z,1528893699.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:39.719Z,1528893699.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:40.121Z,1528893700.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:40.500Z,1528893700.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:40.900Z,1528893700.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:41.295Z,1528893701.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:41.700Z,1528893701.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:42.096Z,1528893702.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:42.518Z,1528893702.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:42.923Z,1528893702.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:43.331Z,1528893703.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:43.700Z,1528893703.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:44.095Z,1528893704.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:44.495Z,1528893704.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:44.896Z,1528893704.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:45.307Z,1528893705.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:45.706Z,1528893705.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:46.107Z,1528893706.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:46.498Z,1528893706.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:46.896Z,1528893706.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:47.307Z,1528893707.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:47.707Z,1528893707.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:48.103Z,1528893708.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:48.500Z,1528893708.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:48.898Z,1528893708.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:49.303Z,1528893709.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:49.708Z,1528893709.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:50.103Z,1528893710.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:50.499Z,1528893710.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:50.904Z,1528893710.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:51.307Z,1528893711.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:51.712Z,1528893711.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:52.107Z,1528893712.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:52.508Z,1528893712.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:52.904Z,1528893712.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:53.312Z,1528893713.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:53.707Z,1528893713.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:54.112Z,1528893714.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:54.502Z,1528893714.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:54.910Z,1528893714.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:55.308Z,1528893715.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:55.707Z,1528893715.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:56.108Z,1528893716.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:56.500Z,1528893716.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:56.904Z,1528893716.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:57.308Z,1528893717.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:57.707Z,1528893717.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:58.107Z,1528893718.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:58.499Z,1528893718.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:58.915Z,1528893718.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:59.307Z,1528893719.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:41:59.711Z,1528893719.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:00.107Z,1528893720.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:00.509Z,1528893720.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:00.912Z,1528893720.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:01.316Z,1528893721.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:01.714Z,1528893721.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:02.114Z,1528893722.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:02.504Z,1528893722.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:02.907Z,1528893722.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:03.314Z,1528893723.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:03.714Z,1528893723.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:04.115Z,1528893724.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:04.509Z,1528893724.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:04.904Z,1528893724.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:05.315Z,1528893725.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:05.712Z,1528893725.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:06.109Z,1528893726.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:06.498Z,1528893726.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:06.904Z,1528893726.904 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:06.904Z,1528893726.904 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 185
2018-06-13T12:42:06.904Z,1528893726.904 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:42:06.906Z,1528893726.906 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:06.906Z,1528893726.906 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 185
2018-06-13T12:42:06.906Z,1528893726.906 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:42:06.908Z,1528893726.908 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:06.908Z,1528893726.908 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 185
2018-06-13T12:42:06.908Z,1528893726.908 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:42:06.988Z,1528893726.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:42:06.988Z,1528893726.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:42:06.989Z,1528893726.989 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:42:07.389Z,1528893727.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:42:07.389Z,1528893727.389 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 185
2018-06-13T12:42:07.389Z,1528893727.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:42:07.389Z,1528893727.389 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 185
2018-06-13T12:42:07.390Z,1528893727.390 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:42:07.390Z,1528893727.390 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 185
2018-06-13T12:42:07.712Z,1528893727.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:42:07.713Z,1528893727.713 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:42:07.713Z,1528893727.713 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:42:07.713Z,1528893727.713 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:42:07.714Z,1528893727.714 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:42:07.714Z,1528893727.714 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:42:07.714Z,1528893727.714 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:42:07.715Z,1528893727.715 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:42:07.715Z,1528893727.715 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:42:08.120Z,1528893728.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:42:08.121Z,1528893728.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:08.503Z,1528893728.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:42:08.504Z,1528893728.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:08.892Z,1528893728.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:42:08.893Z,1528893728.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:09.319Z,1528893729.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:42:09.320Z,1528893729.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:09.720Z,1528893729.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:42:09.721Z,1528893729.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:10.120Z,1528893730.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:42:10.122Z,1528893730.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:10.500Z,1528893730.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:42:10.517Z,1528893730.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:10.899Z,1528893730.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:42:10.900Z,1528893730.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:11.302Z,1528893731.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T12:42:11.303Z,1528893731.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:11.728Z,1528893731.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:42:11.733Z,1528893731.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:12.103Z,1528893732.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:42:12.104Z,1528893732.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:12.499Z,1528893732.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:42:12.499Z,1528893732.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:12.896Z,1528893732.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:42:12.897Z,1528893732.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:13.332Z,1528893733.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T12:42:13.333Z,1528893733.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:13.702Z,1528893733.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T12:42:13.703Z,1528893733.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:14.103Z,1528893734.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T12:42:14.104Z,1528893734.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:14.503Z,1528893734.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:42:14.504Z,1528893734.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:14.896Z,1528893734.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:42:14.897Z,1528893734.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:15.297Z,1528893735.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T12:42:15.298Z,1528893735.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:15.703Z,1528893735.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:42:15.704Z,1528893735.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:16.102Z,1528893736.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:42:16.103Z,1528893736.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:16.503Z,1528893736.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:42:16.504Z,1528893736.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:16.897Z,1528893736.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:42:16.898Z,1528893736.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:17.295Z,1528893737.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:42:17.296Z,1528893737.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:17.699Z,1528893737.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:42:17.700Z,1528893737.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:18.100Z,1528893738.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:42:18.101Z,1528893738.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:18.501Z,1528893738.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:42:18.502Z,1528893738.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:18.912Z,1528893738.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:42:18.933Z,1528893738.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:19.308Z,1528893739.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:42:19.309Z,1528893739.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:19.696Z,1528893739.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:42:19.697Z,1528893739.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:20.098Z,1528893740.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:42:20.099Z,1528893740.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:20.498Z,1528893740.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:42:20.499Z,1528893740.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:20.895Z,1528893740.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:42:20.896Z,1528893740.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:21.295Z,1528893741.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:42:21.296Z,1528893741.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:21.704Z,1528893741.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T12:42:21.706Z,1528893741.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:22.104Z,1528893742.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:42:22.105Z,1528893742.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:22.507Z,1528893742.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:42:22.508Z,1528893742.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:22.899Z,1528893742.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:42:22.900Z,1528893742.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:23.299Z,1528893743.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:42:23.300Z,1528893743.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:23.700Z,1528893743.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:42:23.701Z,1528893743.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:24.100Z,1528893744.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:42:24.101Z,1528893744.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:24.509Z,1528893744.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:42:24.510Z,1528893744.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:24.912Z,1528893744.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:42:24.913Z,1528893744.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:25.307Z,1528893745.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:42:25.308Z,1528893745.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:25.695Z,1528893745.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:42:25.696Z,1528893745.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:26.098Z,1528893746.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:42:26.099Z,1528893746.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:26.509Z,1528893746.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:42:26.510Z,1528893746.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:26.900Z,1528893746.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T12:42:26.901Z,1528893746.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:27.300Z,1528893747.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:27.709Z,1528893747.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:28.109Z,1528893748.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:28.510Z,1528893748.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:28.902Z,1528893748.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:29.307Z,1528893749.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:29.701Z,1528893749.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:30.099Z,1528893750.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:30.510Z,1528893750.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:30.916Z,1528893750.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:31.320Z,1528893751.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:34.408Z,1528893754.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:34.569Z,1528893754.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:34.958Z,1528893754.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:35.358Z,1528893755.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:35.758Z,1528893755.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:36.146Z,1528893756.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:36.551Z,1528893756.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:36.945Z,1528893756.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:37.359Z,1528893757.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:37.754Z,1528893757.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:38.158Z,1528893758.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:38.551Z,1528893758.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:38.951Z,1528893758.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:39.358Z,1528893759.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:39.757Z,1528893759.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:40.153Z,1528893760.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:40.545Z,1528893760.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:40.946Z,1528893760.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:41.346Z,1528893761.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:41.756Z,1528893761.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:42.170Z,1528893762.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:42.553Z,1528893762.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:42.945Z,1528893762.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:43.356Z,1528893763.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:43.751Z,1528893763.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:44.145Z,1528893764.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:44.554Z,1528893764.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:44.958Z,1528893764.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:45.354Z,1528893765.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:45.753Z,1528893765.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:46.146Z,1528893766.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:46.549Z,1528893766.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:46.947Z,1528893766.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:47.332Z,1528893767.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:47.759Z,1528893767.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:48.168Z,1528893768.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:48.561Z,1528893768.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:48.941Z,1528893768.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:49.340Z,1528893769.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:49.736Z,1528893769.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:50.139Z,1528893770.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:50.565Z,1528893770.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:50.966Z,1528893770.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:51.364Z,1528893771.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:51.740Z,1528893771.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:52.135Z,1528893772.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:52.544Z,1528893772.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:52.944Z,1528893772.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:53.339Z,1528893773.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:53.768Z,1528893773.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:54.167Z,1528893774.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:54.551Z,1528893774.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:54.942Z,1528893774.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:55.347Z,1528893775.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:55.740Z,1528893775.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:56.142Z,1528893776.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:56.547Z,1528893776.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:56.946Z,1528893776.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:57.348Z,1528893777.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:57.741Z,1528893777.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:58.139Z,1528893778.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:58.547Z,1528893778.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:58.948Z,1528893778.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:59.339Z,1528893779.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:42:59.747Z,1528893779.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:00.151Z,1528893780.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:00.547Z,1528893780.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:00.939Z,1528893780.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:01.343Z,1528893781.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:01.739Z,1528893781.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:02.141Z,1528893782.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:02.547Z,1528893782.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:02.946Z,1528893782.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:03.345Z,1528893783.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:03.742Z,1528893783.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:04.140Z,1528893784.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:04.548Z,1528893784.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:04.942Z,1528893784.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:05.340Z,1528893785.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:05.747Z,1528893785.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:06.151Z,1528893786.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:06.551Z,1528893786.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:06.941Z,1528893786.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:07.343Z,1528893787.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:07.739Z,1528893787.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:08.143Z,1528893788.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:08.547Z,1528893788.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:08.947Z,1528893788.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:09.347Z,1528893789.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:09.742Z,1528893789.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:10.141Z,1528893790.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:10.542Z,1528893790.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:10.948Z,1528893790.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:11.339Z,1528893791.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:11.747Z,1528893791.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:12.152Z,1528893792.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:12.546Z,1528893792.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:12.943Z,1528893792.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:13.350Z,1528893793.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:13.740Z,1528893793.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:14.144Z,1528893794.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:14.547Z,1528893794.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:14.952Z,1528893794.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:15.347Z,1528893795.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:15.743Z,1528893795.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:16.140Z,1528893796.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:16.540Z,1528893796.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:16.942Z,1528893796.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:17.340Z,1528893797.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:17.746Z,1528893797.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:18.151Z,1528893798.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:18.569Z,1528893798.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:18.942Z,1528893798.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:19.342Z,1528893799.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:19.741Z,1528893799.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:20.142Z,1528893800.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:20.547Z,1528893800.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:20.946Z,1528893800.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:21.347Z,1528893801.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:21.742Z,1528893801.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:22.139Z,1528893802.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:22.545Z,1528893802.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:22.945Z,1528893802.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:23.340Z,1528893803.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:23.752Z,1528893803.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:24.152Z,1528893804.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:24.548Z,1528893804.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:24.942Z,1528893804.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:25.343Z,1528893805.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:25.740Z,1528893805.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:26.142Z,1528893806.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:26.548Z,1528893806.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:26.947Z,1528893806.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:27.351Z,1528893807.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:27.741Z,1528893807.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:28.139Z,1528893808.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:28.541Z,1528893808.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:28.941Z,1528893808.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:29.340Z,1528893809.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:29.748Z,1528893809.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:30.150Z,1528893810.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:30.552Z,1528893810.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:30.942Z,1528893810.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:31.343Z,1528893811.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:34.449Z,1528893814.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:34.629Z,1528893814.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:35.022Z,1528893815.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:35.429Z,1528893815.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:35.824Z,1528893815.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:36.204Z,1528893816.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:36.621Z,1528893816.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:37.006Z,1528893817.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:37.404Z,1528893817.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:37.812Z,1528893817.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:38.216Z,1528893818.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:38.612Z,1528893818.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:39.006Z,1528893819.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:39.406Z,1528893819.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:39.806Z,1528893819.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:40.207Z,1528893820.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:40.612Z,1528893820.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:41.015Z,1528893821.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:41.412Z,1528893821.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:41.806Z,1528893821.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:42.207Z,1528893822.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:42.604Z,1528893822.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:43.008Z,1528893823.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:43.405Z,1528893823.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:43.812Z,1528893823.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:44.216Z,1528893824.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:44.612Z,1528893824.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:45.007Z,1528893825.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:45.407Z,1528893825.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:45.806Z,1528893825.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:46.207Z,1528893826.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:46.612Z,1528893826.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:47.012Z,1528893827.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:47.415Z,1528893827.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:47.806Z,1528893827.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:48.206Z,1528893828.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:48.607Z,1528893828.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:49.007Z,1528893829.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:49.405Z,1528893829.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:49.814Z,1528893829.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:50.216Z,1528893830.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:50.612Z,1528893830.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:51.008Z,1528893831.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:51.406Z,1528893831.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:51.808Z,1528893831.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:52.207Z,1528893832.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:52.615Z,1528893832.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:53.015Z,1528893833.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:53.415Z,1528893833.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:53.807Z,1528893833.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:54.205Z,1528893834.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:54.608Z,1528893834.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:55.009Z,1528893835.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:55.409Z,1528893835.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:55.817Z,1528893835.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:56.220Z,1528893836.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:56.612Z,1528893836.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:57.008Z,1528893837.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:57.408Z,1528893837.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:57.820Z,1528893837.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:58.212Z,1528893838.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:58.620Z,1528893838.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:59.015Z,1528893839.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:59.440Z,1528893839.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:43:59.809Z,1528893839.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:00.215Z,1528893840.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:00.610Z,1528893840.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:01.008Z,1528893841.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:01.408Z,1528893841.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:01.816Z,1528893841.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:02.216Z,1528893842.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:02.620Z,1528893842.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:03.009Z,1528893843.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:03.409Z,1528893843.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:03.810Z,1528893843.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:04.213Z,1528893844.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:04.616Z,1528893844.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:05.016Z,1528893845.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:05.416Z,1528893845.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:05.808Z,1528893845.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:06.222Z,1528893846.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:06.609Z,1528893846.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:07.010Z,1528893847.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:07.412Z,1528893847.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:07.824Z,1528893847.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:08.222Z,1528893848.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:08.617Z,1528893848.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:09.009Z,1528893849.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:09.422Z,1528893849.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:09.812Z,1528893849.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:10.216Z,1528893850.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:10.623Z,1528893850.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:11.022Z,1528893851.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:11.419Z,1528893851.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:11.809Z,1528893851.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:12.213Z,1528893852.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:12.605Z,1528893852.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:13.010Z,1528893853.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:13.412Z,1528893853.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:13.818Z,1528893853.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:14.228Z,1528893854.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:14.628Z,1528893854.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:15.010Z,1528893855.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:15.409Z,1528893855.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:15.811Z,1528893855.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:16.210Z,1528893856.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:16.628Z,1528893856.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:17.023Z,1528893857.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:17.420Z,1528893857.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:17.812Z,1528893857.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:18.210Z,1528893858.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:18.610Z,1528893858.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:19.010Z,1528893859.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:19.409Z,1528893859.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:19.823Z,1528893859.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:20.228Z,1528893860.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:20.618Z,1528893860.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:21.020Z,1528893861.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:21.413Z,1528893861.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:21.812Z,1528893861.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:22.210Z,1528893862.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:22.628Z,1528893862.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:23.028Z,1528893863.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:23.422Z,1528893863.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:23.810Z,1528893863.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:24.210Z,1528893864.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:24.614Z,1528893864.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:25.009Z,1528893865.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:25.409Z,1528893865.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:25.823Z,1528893865.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:26.222Z,1528893866.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:26.622Z,1528893866.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:27.015Z,1528893867.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:27.408Z,1528893867.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:27.811Z,1528893867.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:28.210Z,1528893868.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:28.622Z,1528893868.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:29.028Z,1528893869.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:29.420Z,1528893869.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:29.812Z,1528893869.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:30.210Z,1528893870.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:30.610Z,1528893870.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:31.020Z,1528893871.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:31.423Z,1528893871.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:34.529Z,1528893874.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:34.711Z,1528893874.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:35.087Z,1528893875.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:35.476Z,1528893875.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:35.876Z,1528893875.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:36.274Z,1528893876.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:36.679Z,1528893876.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:37.082Z,1528893877.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:37.483Z,1528893877.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:37.874Z,1528893877.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:38.276Z,1528893878.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:38.674Z,1528893878.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:39.072Z,1528893879.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:39.474Z,1528893879.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:39.879Z,1528893879.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:40.278Z,1528893880.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:40.679Z,1528893880.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:41.074Z,1528893881.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:41.471Z,1528893881.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:41.876Z,1528893881.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:42.280Z,1528893882.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:42.679Z,1528893882.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:43.082Z,1528893883.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:43.479Z,1528893883.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:43.872Z,1528893883.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:44.275Z,1528893884.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:44.674Z,1528893884.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:45.076Z,1528893885.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:45.480Z,1528893885.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:45.883Z,1528893885.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:46.284Z,1528893886.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:46.679Z,1528893886.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:47.074Z,1528893887.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:47.472Z,1528893887.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:47.888Z,1528893887.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:48.278Z,1528893888.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:48.685Z,1528893888.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:49.088Z,1528893889.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:49.488Z,1528893889.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:49.872Z,1528893889.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:50.280Z,1528893890.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:50.677Z,1528893890.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:51.074Z,1528893891.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:51.476Z,1528893891.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:51.885Z,1528893891.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:52.285Z,1528893892.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:52.688Z,1528893892.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:53.078Z,1528893893.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:53.473Z,1528893893.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:53.877Z,1528893893.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:54.277Z,1528893894.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:54.685Z,1528893894.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:55.088Z,1528893895.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:55.484Z,1528893895.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:55.873Z,1528893895.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:56.275Z,1528893896.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:56.678Z,1528893896.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:57.071Z,1528893897.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:57.474Z,1528893897.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:57.884Z,1528893897.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:58.284Z,1528893898.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:58.688Z,1528893898.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:59.078Z,1528893899.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:59.480Z,1528893899.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:44:59.876Z,1528893899.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:00.284Z,1528893900.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:00.687Z,1528893900.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:01.088Z,1528893901.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:01.485Z,1528893901.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:01.873Z,1528893901.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:02.276Z,1528893902.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:02.684Z,1528893902.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:03.078Z,1528893903.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:03.472Z,1528893903.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:03.884Z,1528893903.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:04.285Z,1528893904.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:04.685Z,1528893904.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:05.080Z,1528893905.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:05.485Z,1528893905.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:05.888Z,1528893905.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:06.288Z,1528893906.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:06.691Z,1528893906.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:07.091Z,1528893907.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:07.495Z,1528893907.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:07.868Z,1528893907.868 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:07.868Z,1528893907.868 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 186
2018-06-13T12:45:07.868Z,1528893907.868 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:45:07.870Z,1528893907.870 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:07.871Z,1528893907.871 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 186
2018-06-13T12:45:07.871Z,1528893907.871 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:45:07.872Z,1528893907.872 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:07.872Z,1528893907.872 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 186
2018-06-13T12:45:07.872Z,1528893907.872 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:45:07.969Z,1528893907.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:45:07.969Z,1528893907.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:45:07.970Z,1528893907.970 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:45:08.373Z,1528893908.373 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:45:08.373Z,1528893908.373 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 186
2018-06-13T12:45:08.374Z,1528893908.374 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:45:08.374Z,1528893908.374 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 186
2018-06-13T12:45:08.374Z,1528893908.374 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:45:08.374Z,1528893908.374 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 186
2018-06-13T12:45:08.675Z,1528893908.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:45:08.675Z,1528893908.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:45:08.675Z,1528893908.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:45:08.676Z,1528893908.676 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:45:08.676Z,1528893908.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:45:08.681Z,1528893908.681 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:45:08.681Z,1528893908.681 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:45:08.682Z,1528893908.682 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:45:08.682Z,1528893908.682 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:45:09.071Z,1528893909.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:45:09.072Z,1528893909.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:09.474Z,1528893909.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:45:09.475Z,1528893909.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:09.879Z,1528893909.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:45:09.880Z,1528893909.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:10.282Z,1528893910.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:45:10.283Z,1528893910.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:10.678Z,1528893910.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:45:10.679Z,1528893910.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:11.073Z,1528893911.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:45:11.074Z,1528893911.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:11.471Z,1528893911.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:45:11.472Z,1528893911.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:11.875Z,1528893911.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:45:11.876Z,1528893911.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:12.274Z,1528893912.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T12:45:12.275Z,1528893912.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:12.678Z,1528893912.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:45:12.679Z,1528893912.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:13.082Z,1528893913.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:45:13.083Z,1528893913.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:13.479Z,1528893913.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:45:13.480Z,1528893913.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:13.871Z,1528893913.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:45:13.872Z,1528893913.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:14.274Z,1528893914.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T12:45:14.275Z,1528893914.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:14.673Z,1528893914.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T12:45:14.674Z,1528893914.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:15.072Z,1528893915.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T12:45:15.072Z,1528893915.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:15.473Z,1528893915.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:45:15.474Z,1528893915.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:15.879Z,1528893915.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:45:15.880Z,1528893915.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:16.283Z,1528893916.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T12:45:16.284Z,1528893916.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:16.684Z,1528893916.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:45:16.685Z,1528893916.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:17.075Z,1528893917.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:45:17.076Z,1528893917.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:17.471Z,1528893917.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:45:17.472Z,1528893917.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:17.875Z,1528893917.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:45:17.876Z,1528893917.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:18.277Z,1528893918.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:45:18.278Z,1528893918.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:18.680Z,1528893918.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:45:18.681Z,1528893918.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:19.088Z,1528893919.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:45:19.105Z,1528893919.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:19.478Z,1528893919.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:45:19.479Z,1528893919.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:19.871Z,1528893919.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:45:19.872Z,1528893919.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:20.275Z,1528893920.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:45:20.276Z,1528893920.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:20.676Z,1528893920.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:45:20.678Z,1528893920.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:21.073Z,1528893921.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:45:21.074Z,1528893921.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:21.474Z,1528893921.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:45:21.475Z,1528893921.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:21.880Z,1528893921.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:45:21.882Z,1528893921.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:22.280Z,1528893922.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:45:22.281Z,1528893922.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:22.684Z,1528893922.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T12:45:22.685Z,1528893922.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:23.089Z,1528893923.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:45:23.090Z,1528893923.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:23.477Z,1528893923.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:45:23.478Z,1528893923.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:23.877Z,1528893923.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:45:23.878Z,1528893923.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:24.277Z,1528893924.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:45:24.278Z,1528893924.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:24.689Z,1528893924.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:45:24.690Z,1528893924.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:25.088Z,1528893925.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:45:25.089Z,1528893925.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:25.486Z,1528893925.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:45:25.486Z,1528893925.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:25.879Z,1528893925.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:45:25.880Z,1528893925.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:26.284Z,1528893926.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:45:26.285Z,1528893926.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:26.684Z,1528893926.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:45:26.685Z,1528893926.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:27.082Z,1528893927.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:45:27.083Z,1528893927.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:27.472Z,1528893927.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:45:27.473Z,1528893927.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:27.886Z,1528893927.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:28.286Z,1528893928.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:28.689Z,1528893928.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:29.084Z,1528893929.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:29.482Z,1528893929.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:29.874Z,1528893929.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:30.284Z,1528893930.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:30.687Z,1528893930.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:31.090Z,1528893931.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:31.489Z,1528893931.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:34.581Z,1528893934.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:34.584Z,1528893934.584 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T12:40:31.6Z
2018-06-13T12:45:34.584Z,1528893934.584 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T12:45:34.584Z,1528893934.584 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T12:45:34.714Z,1528893934.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:35.866Z,1528893935.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:36.056Z,1528893936.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:36.441Z,1528893936.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:36.840Z,1528893936.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:37.238Z,1528893937.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:37.641Z,1528893937.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:38.047Z,1528893938.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:41.164Z,1528893941.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:41.277Z,1528893941.277 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0216.lzma
2018-06-13T12:45:41.344Z,1528893941.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:41.735Z,1528893941.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:42.070Z,1528893942.070 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0216.lzma.bak
2018-06-13T12:45:42.070Z,1528893942.070 [DataOverHttps](INFO): SBD MOMSN=8329242
2018-06-13T12:45:42.132Z,1528893942.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:44.011Z,1528893944.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:44.158Z,1528893944.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:47.287Z,1528893947.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:47.444Z,1528893947.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:47.828Z,1528893947.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:48.220Z,1528893948.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:48.652Z,1528893948.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:49.036Z,1528893949.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:49.428Z,1528893949.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:49.824Z,1528893949.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:50.224Z,1528893950.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:50.625Z,1528893950.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:51.032Z,1528893951.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:51.431Z,1528893951.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:51.836Z,1528893951.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:52.223Z,1528893952.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:52.628Z,1528893952.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:55.727Z,1528893955.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:55.810Z,1528893955.810 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180613T032335/Express0217.lzma
2018-06-13T12:45:55.871Z,1528893955.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:56.269Z,1528893956.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:56.610Z,1528893956.610 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0217.lzma.bak
2018-06-13T12:45:56.610Z,1528893956.610 [DataOverHttps](INFO): SBD MOMSN=8329244
2018-06-13T12:45:56.708Z,1528893956.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:58.559Z,1528893958.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:45:58.565Z,1528893958.565 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T12:45:58.565Z,1528893958.565 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T12:45:58.565Z,1528893958.565 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T12:45:58.697Z,1528893958.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:01.834Z,1528893961.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:02.008Z,1528893962.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:02.415Z,1528893962.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:02.790Z,1528893962.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:03.188Z,1528893963.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:03.581Z,1528893963.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:03.980Z,1528893963.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:04.384Z,1528893964.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:04.742Z,1528893964.742 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T12:46:04.742Z,1528893964.742 [NAL9602] Data Fault, FailCount= 1
2018-06-13T12:46:04.742Z,1528893964.742 [NAL9602](ERROR): Data Fault
2018-06-13T12:46:04.800Z,1528893964.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:04.885Z,1528893964.885 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T12:46:05.138Z,1528893965.138 [NAL9602](INFO): Powering down
2018-06-13T12:46:05.188Z,1528893965.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:05.588Z,1528893965.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:05.984Z,1528893965.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:06.061Z,1528893966.061 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T12:46:06.061Z,1528893966.061 [NAL9602] No Fault, FailCount= 1
2018-06-13T12:46:06.392Z,1528893966.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:06.782Z,1528893966.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:07.183Z,1528893967.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:07.600Z,1528893967.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:08.000Z,1528893968.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:08.380Z,1528893968.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:08.775Z,1528893968.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:09.179Z,1528893969.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:09.580Z,1528893969.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:09.978Z,1528893969.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:10.379Z,1528893970.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:10.792Z,1528893970.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:11.174Z,1528893971.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:11.602Z,1528893971.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:12.040Z,1528893972.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:12.438Z,1528893972.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:12.814Z,1528893972.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:13.203Z,1528893973.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:13.572Z,1528893973.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:13.988Z,1528893973.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:14.376Z,1528893974.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:14.772Z,1528893974.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:15.194Z,1528893975.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:15.590Z,1528893975.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:15.992Z,1528893975.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:16.390Z,1528893976.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:16.790Z,1528893976.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:17.191Z,1528893977.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:17.591Z,1528893977.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:17.990Z,1528893977.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:18.391Z,1528893978.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:18.789Z,1528893978.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:19.189Z,1528893979.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:19.591Z,1528893979.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:19.989Z,1528893979.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:20.390Z,1528893980.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:20.790Z,1528893980.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:21.189Z,1528893981.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:21.590Z,1528893981.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:21.991Z,1528893981.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:22.382Z,1528893982.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:22.792Z,1528893982.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:23.176Z,1528893983.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:23.573Z,1528893983.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:23.976Z,1528893983.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:24.376Z,1528893984.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:24.777Z,1528893984.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:25.176Z,1528893985.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:25.577Z,1528893985.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:25.976Z,1528893985.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:26.403Z,1528893986.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:26.782Z,1528893986.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:27.178Z,1528893987.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:27.581Z,1528893987.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:27.977Z,1528893987.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:28.378Z,1528893988.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:28.782Z,1528893988.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:29.184Z,1528893989.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:29.582Z,1528893989.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:29.982Z,1528893989.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:30.384Z,1528893990.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:30.781Z,1528893990.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:31.182Z,1528893991.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:31.577Z,1528893991.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:31.979Z,1528893991.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:32.382Z,1528893992.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:32.777Z,1528893992.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:33.178Z,1528893993.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:33.582Z,1528893993.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:33.978Z,1528893993.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:34.377Z,1528893994.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:34.782Z,1528893994.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:35.177Z,1528893995.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:35.538Z,1528893995.538 [NAL9602](INFO): Powering up NAL9602
2018-06-13T12:46:35.582Z,1528893995.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:35.982Z,1528893995.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:36.381Z,1528893996.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:36.782Z,1528893996.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:37.188Z,1528893997.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:37.584Z,1528893997.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:37.982Z,1528893997.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:38.382Z,1528893998.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:38.784Z,1528893998.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:39.218Z,1528893999.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:39.582Z,1528893999.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:39.977Z,1528893999.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:40.378Z,1528894000.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:40.783Z,1528894000.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:41.177Z,1528894001.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:41.582Z,1528894001.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:41.982Z,1528894001.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:42.384Z,1528894002.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:42.782Z,1528894002.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:43.181Z,1528894003.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:43.584Z,1528894003.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:43.982Z,1528894003.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:44.382Z,1528894004.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:44.777Z,1528894004.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:45.178Z,1528894005.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:45.582Z,1528894005.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:45.983Z,1528894005.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:46.338Z,1528894006.338 [NAL9602](INFO): NAL9602 initialized
2018-06-13T12:46:46.396Z,1528894006.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:46.783Z,1528894006.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:47.196Z,1528894007.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:47.593Z,1528894007.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:47.991Z,1528894007.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:48.384Z,1528894008.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:48.780Z,1528894008.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:49.188Z,1528894009.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:49.592Z,1528894009.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:49.992Z,1528894009.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:50.393Z,1528894010.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:50.783Z,1528894010.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:51.188Z,1528894011.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:51.588Z,1528894011.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:51.984Z,1528894011.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:52.390Z,1528894012.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:52.800Z,1528894012.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:53.198Z,1528894013.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:53.581Z,1528894013.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:53.984Z,1528894013.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:54.386Z,1528894014.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:54.785Z,1528894014.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:55.186Z,1528894015.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:55.599Z,1528894015.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:55.994Z,1528894015.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:56.393Z,1528894016.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:56.782Z,1528894016.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:57.185Z,1528894017.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:57.585Z,1528894017.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:57.985Z,1528894017.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:58.394Z,1528894018.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:58.796Z,1528894018.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:59.198Z,1528894019.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:59.581Z,1528894019.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:46:59.985Z,1528894019.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:00.386Z,1528894020.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:00.786Z,1528894020.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:01.189Z,1528894021.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:01.598Z,1528894021.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:02.008Z,1528894022.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:05.129Z,1528894025.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:05.291Z,1528894025.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:05.682Z,1528894025.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:06.084Z,1528894026.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:06.482Z,1528894026.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:06.889Z,1528894026.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:07.298Z,1528894027.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:07.686Z,1528894027.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:08.087Z,1528894028.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:08.465Z,1528894028.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:08.864Z,1528894028.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:09.295Z,1528894029.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:09.696Z,1528894029.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:10.095Z,1528894030.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:10.470Z,1528894030.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:10.868Z,1528894030.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:11.295Z,1528894031.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:11.700Z,1528894031.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:12.080Z,1528894032.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:12.472Z,1528894032.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:12.870Z,1528894032.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:13.276Z,1528894033.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:13.675Z,1528894033.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:14.076Z,1528894034.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:14.470Z,1528894034.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:14.871Z,1528894034.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:15.275Z,1528894035.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:15.674Z,1528894035.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:16.076Z,1528894036.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:16.469Z,1528894036.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:16.870Z,1528894036.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:17.276Z,1528894037.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:17.678Z,1528894037.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:18.078Z,1528894038.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:18.467Z,1528894038.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:18.870Z,1528894038.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:19.278Z,1528894039.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:19.675Z,1528894039.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:20.075Z,1528894040.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:20.472Z,1528894040.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:20.867Z,1528894040.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:21.275Z,1528894041.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:21.678Z,1528894041.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:22.076Z,1528894042.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:22.471Z,1528894042.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:22.869Z,1528894042.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:23.275Z,1528894043.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:23.679Z,1528894043.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:24.084Z,1528894044.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:24.467Z,1528894044.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:24.869Z,1528894044.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:25.276Z,1528894045.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:25.684Z,1528894045.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:26.075Z,1528894046.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:26.470Z,1528894046.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:26.869Z,1528894046.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:27.275Z,1528894047.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:27.674Z,1528894047.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:28.075Z,1528894048.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:28.476Z,1528894048.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:28.869Z,1528894048.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:29.275Z,1528894049.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:29.678Z,1528894049.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:30.080Z,1528894050.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:30.471Z,1528894050.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:30.869Z,1528894050.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:31.282Z,1528894051.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:31.679Z,1528894051.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:32.080Z,1528894052.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:32.471Z,1528894052.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:32.870Z,1528894052.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:33.277Z,1528894053.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:33.678Z,1528894053.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:34.080Z,1528894054.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:34.472Z,1528894054.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:34.871Z,1528894054.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:35.276Z,1528894055.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:35.679Z,1528894055.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:36.079Z,1528894056.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:36.471Z,1528894056.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:36.871Z,1528894056.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:37.279Z,1528894057.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:37.679Z,1528894057.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:38.079Z,1528894058.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:38.471Z,1528894058.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:38.870Z,1528894058.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:39.280Z,1528894059.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:39.679Z,1528894059.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:40.076Z,1528894060.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:40.471Z,1528894060.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:40.880Z,1528894060.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:41.271Z,1528894061.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:41.680Z,1528894061.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:42.079Z,1528894062.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:42.475Z,1528894062.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:42.872Z,1528894062.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:43.271Z,1528894063.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:43.672Z,1528894063.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:44.070Z,1528894064.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:44.484Z,1528894064.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:44.880Z,1528894064.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:45.281Z,1528894065.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:45.674Z,1528894065.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:46.070Z,1528894066.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:46.472Z,1528894066.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:46.874Z,1528894066.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:47.276Z,1528894067.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:47.680Z,1528894067.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:48.078Z,1528894068.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:48.475Z,1528894068.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:48.873Z,1528894068.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:49.272Z,1528894069.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:49.680Z,1528894069.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:50.072Z,1528894070.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:50.484Z,1528894070.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:50.880Z,1528894070.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:51.280Z,1528894071.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:51.672Z,1528894071.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:52.067Z,1528894072.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:52.474Z,1528894072.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:52.889Z,1528894072.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:53.268Z,1528894073.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:53.685Z,1528894073.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:54.086Z,1528894074.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:54.489Z,1528894074.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:54.872Z,1528894074.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:55.281Z,1528894075.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:55.678Z,1528894075.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:56.077Z,1528894076.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:56.522Z,1528894076.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:56.881Z,1528894076.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:57.280Z,1528894077.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:57.684Z,1528894077.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:58.084Z,1528894078.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:58.483Z,1528894078.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:58.883Z,1528894078.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:47:59.278Z,1528894079.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:02.403Z,1528894082.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:02.585Z,1528894082.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:02.986Z,1528894082.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:03.372Z,1528894083.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:03.755Z,1528894083.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:04.155Z,1528894084.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:04.567Z,1528894084.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:04.963Z,1528894084.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:05.368Z,1528894085.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:05.759Z,1528894085.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:06.158Z,1528894086.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:06.564Z,1528894086.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:06.969Z,1528894086.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:07.365Z,1528894087.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:07.772Z,1528894087.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:08.168Z,1528894088.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:08.560Z,1528894088.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:08.960Z,1528894088.960 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:08.960Z,1528894088.960 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 187
2018-06-13T12:48:08.960Z,1528894088.960 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:48:08.962Z,1528894088.962 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:08.962Z,1528894088.962 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 187
2018-06-13T12:48:08.962Z,1528894088.962 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:48:08.964Z,1528894088.964 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:08.964Z,1528894088.964 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 187
2018-06-13T12:48:08.964Z,1528894088.964 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:48:09.041Z,1528894089.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:48:09.041Z,1528894089.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:48:09.042Z,1528894089.042 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:48:09.453Z,1528894089.453 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:48:09.453Z,1528894089.453 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 187
2018-06-13T12:48:09.454Z,1528894089.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:48:09.454Z,1528894089.454 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 187
2018-06-13T12:48:09.454Z,1528894089.454 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:48:09.454Z,1528894089.454 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 187
2018-06-13T12:48:09.767Z,1528894089.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:48:09.768Z,1528894089.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:48:09.768Z,1528894089.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:48:09.769Z,1528894089.769 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:48:09.769Z,1528894089.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:48:09.769Z,1528894089.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:48:09.770Z,1528894089.770 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:48:09.770Z,1528894089.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:48:09.770Z,1528894089.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:48:10.170Z,1528894090.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:48:10.171Z,1528894090.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:10.569Z,1528894090.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:48:10.570Z,1528894090.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:10.956Z,1528894090.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:48:10.973Z,1528894090.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:11.382Z,1528894091.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:48:11.382Z,1528894091.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:11.780Z,1528894091.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:48:11.781Z,1528894091.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:12.181Z,1528894092.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:48:12.182Z,1528894092.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:12.556Z,1528894092.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:48:12.558Z,1528894092.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:12.955Z,1528894092.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:48:12.956Z,1528894092.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:13.383Z,1528894093.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T12:48:13.383Z,1528894093.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:13.766Z,1528894093.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:48:13.767Z,1528894093.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:14.166Z,1528894094.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:48:14.167Z,1528894094.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:14.557Z,1528894094.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:48:14.558Z,1528894094.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:14.956Z,1528894094.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:48:14.957Z,1528894094.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:15.367Z,1528894095.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T12:48:15.368Z,1528894095.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:15.766Z,1528894095.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T12:48:15.767Z,1528894095.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:16.162Z,1528894096.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T12:48:16.163Z,1528894096.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:16.564Z,1528894096.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:48:16.565Z,1528894096.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:16.955Z,1528894096.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:48:16.956Z,1528894096.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:17.363Z,1528894097.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T12:48:17.364Z,1528894097.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:17.766Z,1528894097.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:48:17.767Z,1528894097.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:18.166Z,1528894098.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:48:18.167Z,1528894098.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:18.557Z,1528894098.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:48:18.558Z,1528894098.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:18.958Z,1528894098.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:48:18.959Z,1528894098.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:19.363Z,1528894099.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:48:19.363Z,1528894099.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:19.766Z,1528894099.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:48:19.767Z,1528894099.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:20.167Z,1528894100.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:48:20.168Z,1528894100.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:20.557Z,1528894100.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:48:20.558Z,1528894100.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:20.957Z,1528894100.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:48:20.958Z,1528894100.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:21.367Z,1528894101.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:48:21.368Z,1528894101.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:21.766Z,1528894101.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:48:21.767Z,1528894101.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:22.164Z,1528894102.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:48:22.166Z,1528894102.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:22.560Z,1528894102.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:48:22.561Z,1528894102.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:22.959Z,1528894102.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:48:22.960Z,1528894102.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:23.368Z,1528894103.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:48:23.369Z,1528894103.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:23.766Z,1528894103.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T12:48:23.767Z,1528894103.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:24.168Z,1528894104.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:48:24.169Z,1528894104.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:24.558Z,1528894104.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:48:24.559Z,1528894104.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:24.960Z,1528894104.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:48:24.961Z,1528894104.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:25.364Z,1528894105.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:48:25.365Z,1528894105.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:25.766Z,1528894105.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:48:25.767Z,1528894105.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:26.167Z,1528894106.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:48:26.168Z,1528894106.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:26.559Z,1528894106.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:48:26.560Z,1528894106.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:26.960Z,1528894106.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:48:26.961Z,1528894106.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:27.367Z,1528894107.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:48:27.368Z,1528894107.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:27.770Z,1528894107.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:48:27.771Z,1528894107.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:28.168Z,1528894108.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:48:28.169Z,1528894108.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:28.563Z,1528894108.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:48:28.564Z,1528894108.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:28.959Z,1528894108.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T12:48:28.960Z,1528894108.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:29.368Z,1528894109.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:29.767Z,1528894109.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:30.168Z,1528894110.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:30.562Z,1528894110.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:30.969Z,1528894110.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:31.372Z,1528894111.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:31.768Z,1528894111.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:32.176Z,1528894112.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:32.560Z,1528894112.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:32.959Z,1528894112.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:33.372Z,1528894113.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:33.768Z,1528894113.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:34.169Z,1528894114.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:34.561Z,1528894114.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:34.956Z,1528894114.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:35.369Z,1528894115.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:35.771Z,1528894115.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:36.164Z,1528894116.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:36.566Z,1528894116.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:36.960Z,1528894116.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:37.376Z,1528894117.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:37.768Z,1528894117.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:38.169Z,1528894118.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:38.560Z,1528894118.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:38.972Z,1528894118.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:39.358Z,1528894119.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:39.764Z,1528894119.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:40.173Z,1528894120.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:40.570Z,1528894120.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:40.960Z,1528894120.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:41.361Z,1528894121.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:41.762Z,1528894121.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:42.156Z,1528894122.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:42.569Z,1528894122.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:42.973Z,1528894122.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:43.370Z,1528894123.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:43.760Z,1528894123.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:44.161Z,1528894124.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:44.560Z,1528894124.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:44.960Z,1528894124.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:45.362Z,1528894125.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:45.769Z,1528894125.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:46.172Z,1528894126.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:46.573Z,1528894126.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:46.967Z,1528894126.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:47.364Z,1528894127.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:47.762Z,1528894127.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:48.160Z,1528894128.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:48.568Z,1528894128.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:48.974Z,1528894128.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:49.364Z,1528894129.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:49.760Z,1528894129.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:50.162Z,1528894130.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:50.560Z,1528894130.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:50.961Z,1528894130.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:51.361Z,1528894131.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:51.769Z,1528894131.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:52.172Z,1528894132.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:52.573Z,1528894132.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:52.968Z,1528894132.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:53.360Z,1528894133.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:53.758Z,1528894133.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:54.160Z,1528894134.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:54.568Z,1528894134.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:54.972Z,1528894134.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:55.369Z,1528894135.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:55.768Z,1528894135.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:56.157Z,1528894136.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:56.560Z,1528894136.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:56.961Z,1528894136.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:57.361Z,1528894137.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:57.770Z,1528894137.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:58.172Z,1528894138.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:58.573Z,1528894138.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:58.962Z,1528894138.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:48:59.362Z,1528894139.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:02.469Z,1528894142.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:02.619Z,1528894142.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:03.014Z,1528894143.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:03.418Z,1528894143.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:03.835Z,1528894143.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:04.211Z,1528894144.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:04.615Z,1528894144.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:05.013Z,1528894145.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:05.392Z,1528894145.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:05.819Z,1528894145.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:06.223Z,1528894146.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:06.616Z,1528894146.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:06.992Z,1528894146.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:07.392Z,1528894147.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:07.793Z,1528894147.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:08.192Z,1528894148.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:08.622Z,1528894148.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:09.024Z,1528894149.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:09.428Z,1528894149.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:09.796Z,1528894149.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:10.196Z,1528894150.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:10.598Z,1528894150.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:10.998Z,1528894150.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:11.425Z,1528894151.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:11.828Z,1528894151.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:12.223Z,1528894152.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:12.631Z,1528894152.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:12.996Z,1528894152.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:13.398Z,1528894153.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:13.801Z,1528894153.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:14.196Z,1528894154.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:14.632Z,1528894154.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:15.007Z,1528894155.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:15.408Z,1528894155.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:15.795Z,1528894155.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:16.201Z,1528894156.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:16.597Z,1528894156.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:16.999Z,1528894156.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:17.398Z,1528894157.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:17.807Z,1528894157.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:18.207Z,1528894158.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:18.603Z,1528894158.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:19.004Z,1528894159.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:19.397Z,1528894159.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:19.801Z,1528894159.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:20.200Z,1528894160.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:20.605Z,1528894160.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:21.008Z,1528894161.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:21.427Z,1528894161.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:21.796Z,1528894161.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:22.198Z,1528894162.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:22.600Z,1528894162.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:23.002Z,1528894163.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:23.398Z,1528894163.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:23.808Z,1528894163.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:24.203Z,1528894164.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:24.603Z,1528894164.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:25.000Z,1528894165.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:25.395Z,1528894165.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:25.800Z,1528894165.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:26.205Z,1528894166.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:26.605Z,1528894166.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:27.008Z,1528894167.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:27.407Z,1528894167.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:27.796Z,1528894167.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:28.202Z,1528894168.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:28.600Z,1528894168.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:28.999Z,1528894168.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:29.398Z,1528894169.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:29.808Z,1528894169.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:30.203Z,1528894170.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:30.603Z,1528894170.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:30.999Z,1528894170.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:31.404Z,1528894171.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:31.798Z,1528894171.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:32.199Z,1528894172.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:32.604Z,1528894172.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:33.007Z,1528894173.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:33.430Z,1528894173.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:33.795Z,1528894173.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:34.201Z,1528894174.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:34.602Z,1528894174.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:34.995Z,1528894174.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:35.398Z,1528894175.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:35.807Z,1528894175.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:36.203Z,1528894176.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:36.604Z,1528894176.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:36.999Z,1528894176.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:37.398Z,1528894177.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:37.798Z,1528894177.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:38.199Z,1528894178.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:38.605Z,1528894178.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:39.007Z,1528894179.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:39.408Z,1528894179.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:39.805Z,1528894179.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:40.198Z,1528894180.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:40.599Z,1528894180.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:40.998Z,1528894180.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:41.404Z,1528894181.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:41.808Z,1528894181.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:42.207Z,1528894182.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:42.605Z,1528894182.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:42.000Z,1528894183.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:43.397Z,1528894183.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:43.800Z,1528894183.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:44.209Z,1528894184.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:44.605Z,1528894184.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:45.012Z,1528894185.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:45.416Z,1528894185.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:45.799Z,1528894185.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:46.204Z,1528894186.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:46.603Z,1528894186.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:46.998Z,1528894186.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:47.399Z,1528894187.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:47.824Z,1528894187.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:48.224Z,1528894188.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:48.614Z,1528894188.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:49.009Z,1528894189.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:49.407Z,1528894189.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:49.807Z,1528894189.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:50.210Z,1528894190.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:50.612Z,1528894190.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:51.014Z,1528894191.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:51.500Z,1528894191.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:51.804Z,1528894191.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:52.208Z,1528894192.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:52.613Z,1528894192.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:53.020Z,1528894193.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:53.421Z,1528894193.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:53.823Z,1528894193.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:54.229Z,1528894194.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:54.607Z,1528894194.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:55.001Z,1528894195.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:55.399Z,1528894195.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:55.800Z,1528894195.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:56.199Z,1528894196.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:56.604Z,1528894196.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:57.033Z,1528894197.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:57.432Z,1528894197.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:57.802Z,1528894197.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:58.201Z,1528894198.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:58.605Z,1528894198.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:59.005Z,1528894199.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:49:59.403Z,1528894199.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:02.515Z,1528894202.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:02.703Z,1528894202.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:03.098Z,1528894203.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:03.491Z,1528894203.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:03.885Z,1528894203.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:04.276Z,1528894204.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:04.700Z,1528894204.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:05.100Z,1528894205.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:05.499Z,1528894205.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:05.897Z,1528894205.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:06.280Z,1528894206.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:06.681Z,1528894206.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:07.082Z,1528894207.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:07.481Z,1528894207.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:07.909Z,1528894207.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:08.310Z,1528894208.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:08.708Z,1528894208.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:09.080Z,1528894209.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:09.481Z,1528894209.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:09.882Z,1528894209.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:10.279Z,1528894210.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:10.692Z,1528894210.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:11.091Z,1528894211.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:11.487Z,1528894211.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:11.884Z,1528894211.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:12.279Z,1528894212.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:12.683Z,1528894212.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:13.085Z,1528894213.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:13.479Z,1528894213.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:13.887Z,1528894213.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:14.291Z,1528894214.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:14.688Z,1528894214.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:15.081Z,1528894215.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:15.483Z,1528894215.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:15.879Z,1528894215.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:16.281Z,1528894216.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:16.692Z,1528894216.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:17.087Z,1528894217.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:17.487Z,1528894217.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:17.883Z,1528894217.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:18.283Z,1528894218.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:18.681Z,1528894218.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:19.083Z,1528894219.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:19.481Z,1528894219.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:19.887Z,1528894219.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:20.291Z,1528894220.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:20.688Z,1528894220.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:21.081Z,1528894221.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:21.483Z,1528894221.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:21.879Z,1528894221.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:22.282Z,1528894222.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:22.691Z,1528894222.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:23.091Z,1528894223.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:23.488Z,1528894223.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:23.888Z,1528894223.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:24.282Z,1528894224.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:24.681Z,1528894224.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:25.085Z,1528894225.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:25.481Z,1528894225.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:25.887Z,1528894225.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:26.296Z,1528894226.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:26.687Z,1528894226.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:27.082Z,1528894227.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:27.483Z,1528894227.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:27.882Z,1528894227.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:28.284Z,1528894228.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:28.691Z,1528894228.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:29.091Z,1528894229.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:29.487Z,1528894229.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:29.884Z,1528894229.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:30.288Z,1528894230.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:30.681Z,1528894230.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:31.090Z,1528894231.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:31.479Z,1528894231.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:31.887Z,1528894231.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:32.291Z,1528894232.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:32.688Z,1528894232.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:33.082Z,1528894233.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:33.484Z,1528894233.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:33.879Z,1528894233.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:34.282Z,1528894234.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:34.691Z,1528894234.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:35.091Z,1528894235.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:35.487Z,1528894235.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:35.884Z,1528894235.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:36.280Z,1528894236.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:36.688Z,1528894236.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:37.098Z,1528894237.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:37.481Z,1528894237.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:37.892Z,1528894237.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:38.295Z,1528894238.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:38.689Z,1528894238.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:39.083Z,1528894239.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:39.484Z,1528894239.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:39.888Z,1528894239.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:40.284Z,1528894240.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:40.716Z,1528894240.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:41.091Z,1528894241.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:41.488Z,1528894241.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:41.883Z,1528894241.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:42.288Z,1528894242.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:42.683Z,1528894242.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:43.083Z,1528894243.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:43.483Z,1528894243.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:43.888Z,1528894243.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:44.291Z,1528894244.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:44.689Z,1528894244.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:45.084Z,1528894245.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:45.484Z,1528894245.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:45.885Z,1528894245.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:46.284Z,1528894246.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:46.692Z,1528894246.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:47.091Z,1528894247.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:47.489Z,1528894247.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:47.884Z,1528894247.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:48.283Z,1528894248.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:48.692Z,1528894248.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:49.081Z,1528894249.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:49.483Z,1528894249.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:49.892Z,1528894249.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:50.293Z,1528894250.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:50.692Z,1528894250.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:51.084Z,1528894251.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:51.488Z,1528894251.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:51.883Z,1528894251.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:52.287Z,1528894252.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:52.692Z,1528894252.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:53.096Z,1528894253.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:53.491Z,1528894253.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:53.883Z,1528894253.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:54.281Z,1528894254.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:54.686Z,1528894254.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:55.083Z,1528894255.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:55.484Z,1528894255.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:55.891Z,1528894255.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:56.292Z,1528894256.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:56.692Z,1528894256.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:57.082Z,1528894257.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:57.482Z,1528894257.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:57.883Z,1528894257.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:58.286Z,1528894258.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:58.692Z,1528894258.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:59.096Z,1528894259.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:59.099Z,1528894259.099 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T12:50:59.099Z,1528894259.099 [Default:CheckIn:C.Wait] Stopped
2018-06-13T12:50:59.099Z,1528894259.099 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T12:50:59.099Z,1528894259.099 [Default:CheckIn:D] Running Loop=1
2018-06-13T12:50:59.500Z,1528894259.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:50:59.503Z,1528894259.503 [Default:CheckIn:D] Stopped
2018-06-13T12:50:59.503Z,1528894259.503 [Default:CheckIn:E] Running Loop=1
2018-06-13T12:51:02.596Z,1528894262.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:02.600Z,1528894262.600 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 563.767643 min 
2018-06-13T12:51:02.600Z,1528894262.600 [Default:CheckIn:E] Stopped
2018-06-13T12:51:02.600Z,1528894262.600 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T12:51:02.601Z,1528894262.601 [Default:CheckIn] Stopped
2018-06-13T12:51:02.601Z,1528894262.601 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T12:51:02.601Z,1528894262.601 [Default:CheckIn](INFO): Running loop #55
2018-06-13T12:51:02.601Z,1528894262.601 [Default:CheckIn] Running Loop=55
2018-06-13T12:51:02.601Z,1528894262.601 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T12:51:02.601Z,1528894262.601 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T12:51:02.777Z,1528894262.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:03.189Z,1528894263.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:03.590Z,1528894263.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:03.986Z,1528894263.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:04.386Z,1528894264.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:04.789Z,1528894264.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:05.181Z,1528894265.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:05.592Z,1528894265.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:05.995Z,1528894265.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:06.388Z,1528894266.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:06.786Z,1528894266.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:07.192Z,1528894267.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:07.572Z,1528894267.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:07.973Z,1528894267.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:08.372Z,1528894268.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:08.799Z,1528894268.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:09.196Z,1528894269.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:09.597Z,1528894269.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:09.968Z,1528894269.968 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:09.968Z,1528894269.968 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 188
2018-06-13T12:51:09.968Z,1528894269.968 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:51:09.970Z,1528894269.970 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:09.970Z,1528894269.970 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 188
2018-06-13T12:51:09.970Z,1528894269.970 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:51:09.972Z,1528894269.972 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:09.972Z,1528894269.972 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 188
2018-06-13T12:51:09.972Z,1528894269.972 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:51:10.069Z,1528894270.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:51:10.069Z,1528894270.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:51:10.070Z,1528894270.070 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:51:10.449Z,1528894270.449 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:51:10.449Z,1528894270.449 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 188
2018-06-13T12:51:10.450Z,1528894270.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:51:10.450Z,1528894270.450 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 188
2018-06-13T12:51:10.450Z,1528894270.450 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:51:10.450Z,1528894270.450 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 188
2018-06-13T12:51:10.768Z,1528894270.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:51:10.769Z,1528894270.769 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:51:10.769Z,1528894270.769 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:51:10.769Z,1528894270.769 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:51:10.770Z,1528894270.770 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:51:10.770Z,1528894270.770 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:51:10.770Z,1528894270.770 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:51:10.771Z,1528894270.771 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:51:10.771Z,1528894270.771 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:51:11.180Z,1528894271.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:51:11.185Z,1528894271.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:11.575Z,1528894271.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:51:11.576Z,1528894271.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:11.984Z,1528894271.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:51:11.985Z,1528894271.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:12.388Z,1528894272.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:51:12.389Z,1528894272.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:12.783Z,1528894272.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:51:12.783Z,1528894272.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:13.174Z,1528894273.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:51:13.175Z,1528894273.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:13.574Z,1528894273.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:51:13.575Z,1528894273.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:13.990Z,1528894273.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:51:13.990Z,1528894273.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:14.374Z,1528894274.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T12:51:14.375Z,1528894274.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:14.788Z,1528894274.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:51:14.789Z,1528894274.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:15.188Z,1528894275.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:51:15.189Z,1528894275.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:15.583Z,1528894275.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:51:15.584Z,1528894275.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:15.980Z,1528894275.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:51:15.981Z,1528894275.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:16.375Z,1528894276.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T12:51:16.376Z,1528894276.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:16.775Z,1528894276.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T12:51:16.776Z,1528894276.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:17.180Z,1528894277.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T12:51:17.180Z,1528894277.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:17.575Z,1528894277.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:51:17.576Z,1528894277.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:17.984Z,1528894277.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:51:17.985Z,1528894277.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:18.388Z,1528894278.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T12:51:18.389Z,1528894278.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:18.784Z,1528894278.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:51:18.785Z,1528894278.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:19.178Z,1528894279.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:51:19.178Z,1528894279.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:19.574Z,1528894279.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:51:19.575Z,1528894279.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:19.975Z,1528894279.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:51:19.976Z,1528894279.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:20.374Z,1528894280.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:51:20.375Z,1528894280.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:20.788Z,1528894280.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:51:20.789Z,1528894280.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:21.188Z,1528894281.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:51:21.189Z,1528894281.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:21.591Z,1528894281.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:51:21.592Z,1528894281.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:21.974Z,1528894281.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:51:21.975Z,1528894281.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:22.375Z,1528894282.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:51:22.376Z,1528894282.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:22.776Z,1528894282.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:51:22.777Z,1528894282.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:23.175Z,1528894283.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:51:23.176Z,1528894283.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:23.576Z,1528894283.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:51:23.577Z,1528894283.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:23.987Z,1528894283.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:51:23.988Z,1528894283.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:24.388Z,1528894284.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:51:24.388Z,1528894284.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:24.784Z,1528894284.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T12:51:24.785Z,1528894284.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:25.176Z,1528894285.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:51:25.176Z,1528894285.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:25.580Z,1528894285.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:51:25.581Z,1528894285.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:25.977Z,1528894285.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:51:25.978Z,1528894285.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:26.375Z,1528894286.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:51:26.376Z,1528894286.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:26.788Z,1528894286.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:51:26.789Z,1528894286.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:27.188Z,1528894287.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:51:27.189Z,1528894287.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:27.585Z,1528894287.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:51:27.586Z,1528894287.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:27.974Z,1528894287.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:51:27.975Z,1528894287.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:28.376Z,1528894288.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:51:28.377Z,1528894288.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:28.774Z,1528894288.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:51:28.775Z,1528894288.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:29.174Z,1528894289.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:51:29.175Z,1528894289.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:29.576Z,1528894289.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:51:29.576Z,1528894289.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:29.984Z,1528894289.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:30.388Z,1528894290.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:30.783Z,1528894290.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:31.179Z,1528894291.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:31.580Z,1528894291.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:31.977Z,1528894291.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:32.380Z,1528894292.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:32.784Z,1528894292.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:33.188Z,1528894293.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:33.587Z,1528894293.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:33.971Z,1528894293.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:34.376Z,1528894294.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:34.776Z,1528894294.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:35.174Z,1528894295.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:35.576Z,1528894295.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:35.992Z,1528894295.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:36.388Z,1528894296.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:36.784Z,1528894296.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:37.188Z,1528894297.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:37.577Z,1528894297.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:37.977Z,1528894297.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:38.378Z,1528894298.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:38.782Z,1528894298.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:39.189Z,1528894299.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:39.588Z,1528894299.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:39.972Z,1528894299.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:40.374Z,1528894300.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:40.776Z,1528894300.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:41.173Z,1528894301.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:41.574Z,1528894301.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:41.987Z,1528894301.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:42.388Z,1528894302.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:42.783Z,1528894302.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:43.175Z,1528894303.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:43.574Z,1528894303.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:43.987Z,1528894303.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:44.382Z,1528894304.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:44.788Z,1528894304.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:45.188Z,1528894305.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:45.588Z,1528894305.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:45.975Z,1528894305.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:46.375Z,1528894306.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:46.775Z,1528894306.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:47.175Z,1528894307.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:47.575Z,1528894307.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:47.989Z,1528894307.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:48.388Z,1528894308.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:48.784Z,1528894308.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:49.175Z,1528894309.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:49.574Z,1528894309.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:49.975Z,1528894309.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:50.375Z,1528894310.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:50.784Z,1528894310.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:51.188Z,1528894311.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:51.585Z,1528894311.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:51.974Z,1528894311.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:52.378Z,1528894312.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:52.776Z,1528894312.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:53.175Z,1528894313.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:53.584Z,1528894313.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:53.988Z,1528894313.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:54.392Z,1528894314.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:54.784Z,1528894314.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:55.176Z,1528894315.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:55.580Z,1528894315.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:55.977Z,1528894315.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:56.378Z,1528894316.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:56.784Z,1528894316.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:57.192Z,1528894317.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:57.589Z,1528894317.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:57.974Z,1528894317.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:58.376Z,1528894318.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:58.784Z,1528894318.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:59.175Z,1528894319.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:51:59.578Z,1528894319.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:02.770Z,1528894322.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:02.940Z,1528894322.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:03.325Z,1528894323.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:03.717Z,1528894323.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:04.122Z,1528894324.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:04.508Z,1528894324.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:04.925Z,1528894324.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:05.336Z,1528894325.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:05.726Z,1528894325.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:06.107Z,1528894326.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:06.504Z,1528894326.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:06.910Z,1528894326.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:07.308Z,1528894327.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:07.731Z,1528894327.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:08.134Z,1528894328.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:08.519Z,1528894328.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:08.906Z,1528894328.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:09.307Z,1528894329.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:09.742Z,1528894329.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:10.120Z,1528894330.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:10.519Z,1528894330.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:10.912Z,1528894330.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:11.307Z,1528894331.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:11.720Z,1528894331.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:12.119Z,1528894332.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:12.516Z,1528894332.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:12.912Z,1528894332.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:13.311Z,1528894333.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:13.716Z,1528894333.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:14.118Z,1528894334.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:14.543Z,1528894334.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:14.907Z,1528894334.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:15.311Z,1528894335.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:15.719Z,1528894335.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:16.119Z,1528894336.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:16.520Z,1528894336.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:16.911Z,1528894336.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:17.320Z,1528894337.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:17.720Z,1528894337.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:18.119Z,1528894338.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:18.524Z,1528894338.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:18.912Z,1528894338.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:19.312Z,1528894339.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:19.716Z,1528894339.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:20.124Z,1528894340.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:20.520Z,1528894340.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:20.911Z,1528894340.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:21.311Z,1528894341.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:21.719Z,1528894341.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:22.120Z,1528894342.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:22.520Z,1528894342.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:22.916Z,1528894342.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:23.312Z,1528894343.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:23.715Z,1528894343.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:24.119Z,1528894344.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:24.517Z,1528894344.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:24.910Z,1528894344.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:25.314Z,1528894345.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:25.716Z,1528894345.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:26.120Z,1528894346.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:26.519Z,1528894346.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:26.917Z,1528894346.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:27.311Z,1528894347.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:27.711Z,1528894347.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:28.120Z,1528894348.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:28.511Z,1528894348.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:28.920Z,1528894348.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:29.316Z,1528894349.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:29.720Z,1528894349.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:30.113Z,1528894350.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:30.511Z,1528894350.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:30.910Z,1528894350.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:31.316Z,1528894351.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:31.710Z,1528894351.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:32.117Z,1528894352.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:32.524Z,1528894352.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:32.924Z,1528894352.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:33.314Z,1528894353.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:33.711Z,1528894353.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:34.108Z,1528894354.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:34.516Z,1528894354.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:34.928Z,1528894354.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:35.324Z,1528894355.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:35.720Z,1528894355.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:36.111Z,1528894356.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:36.508Z,1528894356.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:36.916Z,1528894356.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:37.316Z,1528894357.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:37.708Z,1528894357.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:38.124Z,1528894358.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:38.524Z,1528894358.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:38.921Z,1528894358.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:39.311Z,1528894359.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:39.722Z,1528894359.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:40.113Z,1528894360.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:40.511Z,1528894360.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:40.933Z,1528894360.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:41.319Z,1528894361.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:41.727Z,1528894361.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:42.123Z,1528894362.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:42.516Z,1528894362.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:42.920Z,1528894362.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:43.321Z,1528894363.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:43.700Z,1528894363.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:44.134Z,1528894364.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:44.535Z,1528894364.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:44.935Z,1528894364.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:45.307Z,1528894365.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:45.708Z,1528894365.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:46.108Z,1528894366.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:46.512Z,1528894366.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:46.919Z,1528894366.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:47.319Z,1528894367.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:47.715Z,1528894367.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:48.116Z,1528894368.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:48.508Z,1528894368.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:48.909Z,1528894368.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:49.314Z,1528894369.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:49.716Z,1528894369.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:50.115Z,1528894370.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:50.520Z,1528894370.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:50.915Z,1528894370.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:51.312Z,1528894371.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:51.711Z,1528894371.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:52.111Z,1528894372.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:52.510Z,1528894372.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:52.919Z,1528894372.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:53.341Z,1528894373.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:53.715Z,1528894373.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:54.112Z,1528894374.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:54.507Z,1528894374.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:54.909Z,1528894374.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:55.317Z,1528894375.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:55.715Z,1528894375.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:56.143Z,1528894376.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:56.542Z,1528894376.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:56.916Z,1528894376.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:57.316Z,1528894377.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:57.716Z,1528894377.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:58.112Z,1528894378.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:58.510Z,1528894378.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:58.920Z,1528894378.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:59.343Z,1528894379.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:52:59.723Z,1528894379.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:02.820Z,1528894382.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:03.000Z,1528894383.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:03.406Z,1528894383.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:03.803Z,1528894383.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:04.200Z,1528894384.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:04.605Z,1528894384.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:04.998Z,1528894384.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:05.380Z,1528894385.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:05.811Z,1528894385.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:06.216Z,1528894386.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:06.615Z,1528894386.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:06.988Z,1528894386.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:07.384Z,1528894387.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:07.791Z,1528894387.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:08.213Z,1528894388.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:08.601Z,1528894388.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:08.987Z,1528894388.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:09.387Z,1528894389.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:09.801Z,1528894389.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:10.196Z,1528894390.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:10.594Z,1528894390.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:10.991Z,1528894390.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:11.388Z,1528894391.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:11.811Z,1528894391.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:12.198Z,1528894392.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:12.596Z,1528894392.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:13.005Z,1528894393.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:13.399Z,1528894393.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:13.795Z,1528894393.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:14.202Z,1528894394.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:14.602Z,1528894394.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:14.988Z,1528894394.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:15.388Z,1528894395.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:15.786Z,1528894395.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:16.198Z,1528894396.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:16.600Z,1528894396.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:17.002Z,1528894397.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:17.386Z,1528894397.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:17.792Z,1528894397.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:18.192Z,1528894398.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:18.586Z,1528894398.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:18.996Z,1528894398.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:19.400Z,1528894399.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:19.804Z,1528894399.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:20.188Z,1528894400.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:20.587Z,1528894400.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:20.991Z,1528894400.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:21.396Z,1528894401.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:21.787Z,1528894401.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:22.193Z,1528894402.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:22.600Z,1528894402.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:22.000Z,1528894403.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:23.386Z,1528894403.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:23.788Z,1528894403.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:24.187Z,1528894404.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:24.587Z,1528894404.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:25.001Z,1528894405.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:25.400Z,1528894405.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:25.796Z,1528894405.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:26.188Z,1528894406.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:26.592Z,1528894406.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:26.986Z,1528894406.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:27.387Z,1528894407.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:27.787Z,1528894407.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:28.197Z,1528894408.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:28.600Z,1528894408.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:28.000Z,1528894409.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:29.390Z,1528894409.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:29.788Z,1528894409.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:30.187Z,1528894410.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:30.586Z,1528894410.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:30.996Z,1528894410.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:31.401Z,1528894411.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:31.801Z,1528894411.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:32.188Z,1528894412.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:32.586Z,1528894412.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:32.986Z,1528894412.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:33.390Z,1528894413.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:33.786Z,1528894413.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:34.205Z,1528894414.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:34.599Z,1528894414.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:34.000Z,1528894415.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:35.386Z,1528894415.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:35.786Z,1528894415.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:36.188Z,1528894416.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:36.586Z,1528894416.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:36.997Z,1528894416.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:37.404Z,1528894417.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:37.804Z,1528894417.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:38.187Z,1528894418.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:38.587Z,1528894418.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:38.992Z,1528894418.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:39.389Z,1528894419.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:39.787Z,1528894419.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:40.198Z,1528894420.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:40.601Z,1528894420.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:41.004Z,1528894421.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:41.388Z,1528894421.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:41.787Z,1528894421.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:42.188Z,1528894422.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:42.587Z,1528894422.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:42.998Z,1528894422.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:43.403Z,1528894423.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:43.801Z,1528894423.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:44.189Z,1528894424.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:44.588Z,1528894424.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:44.987Z,1528894424.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:45.389Z,1528894425.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:45.808Z,1528894425.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:46.200Z,1528894426.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:46.605Z,1528894426.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:47.002Z,1528894427.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:47.386Z,1528894427.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:47.787Z,1528894427.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:48.192Z,1528894428.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:48.596Z,1528894428.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:49.004Z,1528894429.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:49.402Z,1528894429.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:49.796Z,1528894429.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:50.188Z,1528894430.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:50.590Z,1528894430.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:50.984Z,1528894430.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:51.395Z,1528894431.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:51.791Z,1528894431.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:52.194Z,1528894432.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:52.601Z,1528894432.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:53.015Z,1528894433.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:53.400Z,1528894433.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:53.803Z,1528894433.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:54.200Z,1528894434.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:54.602Z,1528894434.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:55.004Z,1528894435.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:55.414Z,1528894435.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:55.799Z,1528894435.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:56.184Z,1528894436.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:56.585Z,1528894436.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:56.979Z,1528894436.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:57.392Z,1528894437.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:57.784Z,1528894437.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:58.187Z,1528894438.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:58.615Z,1528894438.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:58.995Z,1528894438.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:59.384Z,1528894439.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:53:59.787Z,1528894439.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:00.189Z,1528894440.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:00.587Z,1528894440.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:01.015Z,1528894441.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:01.419Z,1528894441.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:01.796Z,1528894441.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:02.192Z,1528894442.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:02.590Z,1528894442.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:02.990Z,1528894442.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:03.390Z,1528894443.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:06.494Z,1528894446.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:06.670Z,1528894446.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:07.069Z,1528894447.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:07.476Z,1528894447.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:07.847Z,1528894447.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:08.268Z,1528894448.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:08.656Z,1528894448.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:09.079Z,1528894449.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:09.463Z,1528894449.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:09.863Z,1528894449.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:10.256Z,1528894450.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:10.654Z,1528894450.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:11.056Z,1528894451.056 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:11.056Z,1528894451.056 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 189
2018-06-13T12:54:11.056Z,1528894451.056 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:54:11.058Z,1528894451.058 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:11.058Z,1528894451.058 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 189
2018-06-13T12:54:11.058Z,1528894451.058 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:54:11.060Z,1528894451.060 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:11.060Z,1528894451.060 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 189
2018-06-13T12:54:11.060Z,1528894451.060 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:54:11.145Z,1528894451.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:54:11.145Z,1528894451.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:54:11.146Z,1528894451.146 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:54:11.533Z,1528894451.533 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:54:11.533Z,1528894451.533 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 189
2018-06-13T12:54:11.534Z,1528894451.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:54:11.534Z,1528894451.534 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 189
2018-06-13T12:54:11.534Z,1528894451.534 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:54:11.534Z,1528894451.534 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 189
2018-06-13T12:54:11.854Z,1528894451.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:54:11.854Z,1528894451.854 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:54:11.854Z,1528894451.854 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:54:11.855Z,1528894451.855 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:54:11.855Z,1528894451.855 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:54:11.855Z,1528894451.855 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:54:11.856Z,1528894451.856 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:54:11.856Z,1528894451.856 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:54:11.856Z,1528894451.856 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:54:12.280Z,1528894452.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:54:12.285Z,1528894452.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:12.672Z,1528894452.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T12:54:12.673Z,1528894452.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:13.069Z,1528894453.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T12:54:13.070Z,1528894453.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:13.465Z,1528894453.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T12:54:13.466Z,1528894453.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:13.864Z,1528894453.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T12:54:13.865Z,1528894453.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:14.257Z,1528894454.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:54:14.258Z,1528894454.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:14.657Z,1528894454.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T12:54:14.658Z,1528894454.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:15.071Z,1528894455.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T12:54:15.072Z,1528894455.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:15.470Z,1528894455.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T12:54:15.471Z,1528894455.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:15.870Z,1528894455.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T12:54:15.871Z,1528894455.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:16.261Z,1528894456.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T12:54:16.262Z,1528894456.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:16.661Z,1528894456.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T12:54:16.662Z,1528894456.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:17.066Z,1528894457.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T12:54:17.067Z,1528894457.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:17.469Z,1528894457.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T12:54:17.470Z,1528894457.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:17.866Z,1528894457.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T12:54:17.867Z,1528894457.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:18.269Z,1528894458.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T12:54:18.270Z,1528894458.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:18.676Z,1528894458.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T12:54:18.677Z,1528894458.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:19.076Z,1528894459.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T12:54:19.077Z,1528894459.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:19.460Z,1528894459.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T12:54:19.462Z,1528894459.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:19.865Z,1528894459.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T12:54:19.866Z,1528894459.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:20.249Z,1528894460.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T12:54:20.250Z,1528894460.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:20.659Z,1528894460.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T12:54:20.660Z,1528894460.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:21.059Z,1528894461.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T12:54:21.060Z,1528894461.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:21.462Z,1528894461.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T12:54:21.463Z,1528894461.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:21.864Z,1528894461.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T12:54:21.865Z,1528894461.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:22.254Z,1528894462.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T12:54:22.255Z,1528894462.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:22.654Z,1528894462.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T12:54:22.655Z,1528894462.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:23.064Z,1528894463.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T12:54:23.065Z,1528894463.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:23.455Z,1528894463.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T12:54:23.456Z,1528894463.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:23.854Z,1528894463.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T12:54:23.855Z,1528894463.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:24.263Z,1528894464.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T12:54:24.264Z,1528894464.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:24.661Z,1528894464.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T12:54:24.662Z,1528894464.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:25.066Z,1528894465.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T12:54:25.067Z,1528894465.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:25.468Z,1528894465.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T12:54:25.473Z,1528894465.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:25.855Z,1528894465.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T12:54:25.856Z,1528894465.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:26.256Z,1528894466.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T12:54:26.257Z,1528894466.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:26.660Z,1528894466.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T12:54:26.661Z,1528894466.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:27.062Z,1528894467.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T12:54:27.063Z,1528894467.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:27.470Z,1528894467.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T12:54:27.471Z,1528894467.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:27.870Z,1528894467.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T12:54:27.871Z,1528894467.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:28.260Z,1528894468.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T12:54:28.260Z,1528894468.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:28.657Z,1528894468.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T12:54:28.658Z,1528894468.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:29.059Z,1528894469.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T12:54:29.060Z,1528894469.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:29.458Z,1528894469.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T12:54:29.459Z,1528894469.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:29.856Z,1528894469.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T12:54:29.857Z,1528894469.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:30.269Z,1528894470.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T12:54:30.270Z,1528894470.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:30.666Z,1528894470.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T12:54:30.667Z,1528894470.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:31.064Z,1528894471.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:31.470Z,1528894471.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:31.864Z,1528894471.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:32.257Z,1528894472.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:32.668Z,1528894472.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:33.066Z,1528894473.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:33.470Z,1528894473.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:33.870Z,1528894473.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:34.263Z,1528894474.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:34.665Z,1528894474.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:35.069Z,1528894475.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:35.465Z,1528894475.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:35.873Z,1528894475.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:36.276Z,1528894476.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:36.672Z,1528894476.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:37.076Z,1528894477.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:37.468Z,1528894477.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:37.852Z,1528894477.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:38.255Z,1528894478.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:38.676Z,1528894478.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:39.084Z,1528894479.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:39.483Z,1528894479.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:39.864Z,1528894479.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:40.256Z,1528894480.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:40.654Z,1528894480.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:41.056Z,1528894481.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:41.451Z,1528894481.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:41.856Z,1528894481.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:42.260Z,1528894482.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:42.663Z,1528894482.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:43.060Z,1528894483.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:43.455Z,1528894483.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:43.852Z,1528894483.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:44.256Z,1528894484.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:44.655Z,1528894484.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:45.057Z,1528894485.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:45.463Z,1528894485.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:45.867Z,1528894485.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:46.260Z,1528894486.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:46.656Z,1528894486.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:47.055Z,1528894487.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:47.453Z,1528894487.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:47.857Z,1528894487.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:48.264Z,1528894488.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:48.664Z,1528894488.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:49.064Z,1528894489.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:49.456Z,1528894489.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:49.853Z,1528894489.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:50.256Z,1528894490.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:50.659Z,1528894490.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:51.061Z,1528894491.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:51.463Z,1528894491.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:51.864Z,1528894491.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:52.260Z,1528894492.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:52.657Z,1528894492.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:53.055Z,1528894493.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:53.456Z,1528894493.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:53.856Z,1528894493.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:54.263Z,1528894494.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:54.668Z,1528894494.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:55.063Z,1528894495.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:55.456Z,1528894495.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:55.852Z,1528894495.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:56.256Z,1528894496.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:56.660Z,1528894496.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:57.060Z,1528894497.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:57.463Z,1528894497.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:57.863Z,1528894497.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:58.254Z,1528894498.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:58.656Z,1528894498.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:59.055Z,1528894499.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:59.456Z,1528894499.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:54:59.860Z,1528894499.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:02.971Z,1528894502.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:03.152Z,1528894503.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:03.544Z,1528894503.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:03.944Z,1528894503.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:04.341Z,1528894504.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:04.743Z,1528894504.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:05.150Z,1528894505.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:05.549Z,1528894505.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:05.945Z,1528894505.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:06.343Z,1528894506.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:06.742Z,1528894506.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:07.144Z,1528894507.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:07.547Z,1528894507.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:07.948Z,1528894507.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:08.354Z,1528894508.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:08.759Z,1528894508.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:09.154Z,1528894509.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:09.529Z,1528894509.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:09.929Z,1528894509.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:10.329Z,1528894510.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:10.736Z,1528894510.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:11.159Z,1528894511.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:11.543Z,1528894511.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:11.943Z,1528894511.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:12.333Z,1528894512.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:12.736Z,1528894512.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:13.136Z,1528894513.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:13.536Z,1528894513.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:13.932Z,1528894513.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:14.364Z,1528894514.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:14.744Z,1528894514.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:15.144Z,1528894515.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:15.534Z,1528894515.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:15.939Z,1528894515.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:16.332Z,1528894516.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:16.734Z,1528894516.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:17.147Z,1528894517.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:17.543Z,1528894517.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:17.944Z,1528894517.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:18.335Z,1528894518.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:18.734Z,1528894518.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:19.143Z,1528894519.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:19.540Z,1528894519.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:19.932Z,1528894519.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:20.344Z,1528894520.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:20.743Z,1528894520.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:21.141Z,1528894521.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:21.535Z,1528894521.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:21.935Z,1528894521.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:22.333Z,1528894522.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:22.735Z,1528894522.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:23.142Z,1528894523.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:23.544Z,1528894523.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:23.947Z,1528894523.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:24.337Z,1528894524.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:24.733Z,1528894524.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:25.144Z,1528894525.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:25.533Z,1528894525.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:25.940Z,1528894525.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:26.344Z,1528894526.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:26.749Z,1528894526.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:27.141Z,1528894527.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:27.537Z,1528894527.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:27.936Z,1528894527.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:28.332Z,1528894528.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:28.739Z,1528894528.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:29.149Z,1528894529.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:29.544Z,1528894529.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:29.944Z,1528894529.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:30.333Z,1528894530.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:30.740Z,1528894530.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:31.136Z,1528894531.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:31.535Z,1528894531.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:31.932Z,1528894531.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:32.348Z,1528894532.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:32.745Z,1528894532.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:33.140Z,1528894533.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:33.536Z,1528894533.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:33.934Z,1528894533.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:34.333Z,1528894534.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:34.736Z,1528894534.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:35.148Z,1528894535.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:35.545Z,1528894535.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:35.944Z,1528894535.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:36.334Z,1528894536.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:36.732Z,1528894536.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:37.136Z,1528894537.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:37.535Z,1528894537.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:37.932Z,1528894537.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:38.345Z,1528894538.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:38.747Z,1528894538.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:39.140Z,1528894539.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:39.536Z,1528894539.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:39.933Z,1528894539.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:40.333Z,1528894540.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:40.736Z,1528894540.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:41.148Z,1528894541.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:41.552Z,1528894541.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:41.944Z,1528894541.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:42.339Z,1528894542.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:42.734Z,1528894542.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:43.138Z,1528894543.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:43.535Z,1528894543.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:43.940Z,1528894543.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:44.352Z,1528894544.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:44.744Z,1528894544.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:45.152Z,1528894545.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:45.536Z,1528894545.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:45.935Z,1528894545.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:46.344Z,1528894546.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:46.735Z,1528894546.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:47.149Z,1528894547.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:47.552Z,1528894547.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:47.952Z,1528894547.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:48.335Z,1528894548.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:48.734Z,1528894548.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:49.136Z,1528894549.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:49.539Z,1528894549.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:49.940Z,1528894549.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:50.345Z,1528894550.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:50.749Z,1528894550.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:51.152Z,1528894551.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:51.536Z,1528894551.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:51.941Z,1528894551.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:52.336Z,1528894552.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:52.740Z,1528894552.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:53.149Z,1528894553.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:53.548Z,1528894553.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:53.946Z,1528894553.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:54.341Z,1528894554.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:54.744Z,1528894554.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:55.137Z,1528894555.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:55.536Z,1528894555.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:55.938Z,1528894555.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:56.352Z,1528894556.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:56.760Z,1528894556.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:57.145Z,1528894557.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:57.538Z,1528894557.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:57.942Z,1528894557.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:58.341Z,1528894558.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:58.743Z,1528894558.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:59.150Z,1528894559.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:59.553Z,1528894559.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:55:59.948Z,1528894559.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:00.342Z,1528894560.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:00.743Z,1528894560.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:01.142Z,1528894561.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:04.249Z,1528894564.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:04.252Z,1528894564.252 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T12:51:02.6Z
2018-06-13T12:56:04.252Z,1528894564.252 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T12:56:04.253Z,1528894564.253 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T12:56:04.398Z,1528894564.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:05.559Z,1528894565.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:05.736Z,1528894565.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:06.117Z,1528894566.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:06.501Z,1528894566.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:06.914Z,1528894566.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:07.310Z,1528894567.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:07.691Z,1528894567.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:08.120Z,1528894568.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:08.520Z,1528894568.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:08.915Z,1528894568.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:09.292Z,1528894569.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:09.693Z,1528894569.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:12.839Z,1528894572.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:12.941Z,1528894572.941 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0220.lzma
2018-06-13T12:56:13.024Z,1528894573.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:13.415Z,1528894573.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:13.742Z,1528894573.742 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0220.lzma.bak
2018-06-13T12:56:13.742Z,1528894573.742 [DataOverHttps](INFO): SBD MOMSN=8329255
2018-06-13T12:56:13.798Z,1528894573.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:15.674Z,1528894575.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:15.822Z,1528894575.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:16.226Z,1528894576.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:16.632Z,1528894576.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:17.026Z,1528894577.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:20.134Z,1528894580.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:20.293Z,1528894580.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:20.688Z,1528894580.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:21.092Z,1528894581.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:21.488Z,1528894581.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:21.876Z,1528894581.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:22.274Z,1528894582.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:22.676Z,1528894582.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:23.069Z,1528894583.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:26.192Z,1528894586.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:26.297Z,1528894586.297 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0221.lzma
2018-06-13T12:56:26.376Z,1528894586.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:26.752Z,1528894586.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:27.098Z,1528894587.098 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0221.lzma.bak
2018-06-13T12:56:27.098Z,1528894587.098 [DataOverHttps](INFO): SBD MOMSN=8329257
2018-06-13T12:56:27.180Z,1528894587.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:29.029Z,1528894589.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:29.032Z,1528894589.032 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T12:56:29.032Z,1528894589.032 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T12:56:29.032Z,1528894589.032 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T12:56:29.169Z,1528894589.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:29.586Z,1528894589.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:29.993Z,1528894589.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:30.391Z,1528894590.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:33.548Z,1528894593.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:33.697Z,1528894593.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:34.105Z,1528894594.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:34.506Z,1528894594.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:34.903Z,1528894594.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:35.301Z,1528894595.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:35.704Z,1528894595.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:36.097Z,1528894596.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:36.503Z,1528894596.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:36.904Z,1528894596.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:37.303Z,1528894597.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:37.680Z,1528894597.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:38.080Z,1528894598.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:38.505Z,1528894598.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:38.906Z,1528894598.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:39.312Z,1528894599.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:39.707Z,1528894599.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:40.103Z,1528894600.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:40.480Z,1528894600.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:40.906Z,1528894600.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:41.305Z,1528894601.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:41.709Z,1528894601.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:42.106Z,1528894602.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:42.503Z,1528894602.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:42.904Z,1528894602.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:43.307Z,1528894603.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:43.706Z,1528894603.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:44.110Z,1528894604.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:44.506Z,1528894604.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:44.907Z,1528894604.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:45.316Z,1528894605.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:45.712Z,1528894605.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:46.103Z,1528894606.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:46.509Z,1528894606.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:46.906Z,1528894606.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:47.305Z,1528894607.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:47.707Z,1528894607.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:48.106Z,1528894608.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:48.450Z,1528894608.450 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T12:56:48.450Z,1528894608.450 [NAL9602] Data Fault, FailCount= 2
2018-06-13T12:56:48.450Z,1528894608.450 [NAL9602](ERROR): Data Fault
2018-06-13T12:56:48.502Z,1528894608.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:48.585Z,1528894608.585 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T12:56:48.846Z,1528894608.846 [NAL9602](INFO): Powering down
2018-06-13T12:56:48.880Z,1528894608.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:49.288Z,1528894609.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:49.688Z,1528894609.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:49.785Z,1528894609.785 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T12:56:49.785Z,1528894609.785 [NAL9602] No Fault, FailCount= 2
2018-06-13T12:56:50.088Z,1528894610.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:50.489Z,1528894610.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:50.887Z,1528894610.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:51.288Z,1528894611.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:51.687Z,1528894611.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:52.087Z,1528894612.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:52.483Z,1528894612.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:52.887Z,1528894612.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:53.287Z,1528894613.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:53.688Z,1528894613.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:54.088Z,1528894614.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:54.488Z,1528894614.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:54.888Z,1528894614.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:55.315Z,1528894615.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:55.688Z,1528894615.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:56.084Z,1528894616.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:56.512Z,1528894616.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:56.888Z,1528894616.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:57.284Z,1528894617.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:57.688Z,1528894617.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:58.088Z,1528894618.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:58.492Z,1528894618.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:58.884Z,1528894618.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:59.289Z,1528894619.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:56:59.688Z,1528894619.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:00.084Z,1528894620.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:00.488Z,1528894620.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:00.887Z,1528894620.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:01.284Z,1528894621.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:01.688Z,1528894621.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:02.084Z,1528894622.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:02.483Z,1528894622.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:02.887Z,1528894622.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:03.288Z,1528894623.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:03.687Z,1528894623.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:04.088Z,1528894624.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:04.482Z,1528894624.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:04.883Z,1528894624.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:05.287Z,1528894625.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:05.686Z,1528894625.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:06.085Z,1528894626.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:06.487Z,1528894626.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:06.886Z,1528894626.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:07.285Z,1528894627.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:07.688Z,1528894627.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:08.100Z,1528894628.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:08.488Z,1528894628.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:08.900Z,1528894628.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:09.288Z,1528894629.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:09.687Z,1528894629.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:10.098Z,1528894630.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:10.496Z,1528894630.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:10.893Z,1528894630.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:11.297Z,1528894631.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:11.767Z,1528894631.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:12.156Z,1528894632.156 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:12.156Z,1528894632.156 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 190
2018-06-13T12:57:12.156Z,1528894632.156 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T12:57:12.176Z,1528894632.176 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:12.176Z,1528894632.176 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 190
2018-06-13T12:57:12.176Z,1528894632.176 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T12:57:12.202Z,1528894632.202 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:12.202Z,1528894632.202 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 190
2018-06-13T12:57:12.202Z,1528894632.202 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T12:57:12.281Z,1528894632.281 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T12:57:12.281Z,1528894632.281 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T12:57:12.282Z,1528894632.282 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T12:57:12.749Z,1528894632.749 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T12:57:12.749Z,1528894632.749 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 190
2018-06-13T12:57:12.750Z,1528894632.750 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T12:57:12.750Z,1528894632.750 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 190
2018-06-13T12:57:12.750Z,1528894632.750 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T12:57:12.750Z,1528894632.750 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 190
2018-06-13T12:57:12.969Z,1528894632.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T12:57:12.970Z,1528894632.970 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:57:12.970Z,1528894632.970 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:57:12.971Z,1528894632.971 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T12:57:12.971Z,1528894632.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:57:12.971Z,1528894632.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:57:12.972Z,1528894632.972 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T12:57:12.972Z,1528894632.972 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T12:57:12.973Z,1528894632.973 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T12:57:13.358Z,1528894633.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T12:57:13.359Z,1528894633.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:13.692Z,1528894633.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2018-06-13T12:57:13.697Z,1528894633.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:14.091Z,1528894634.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2018-06-13T12:57:14.092Z,1528894634.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:14.486Z,1528894634.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2018-06-13T12:57:14.487Z,1528894634.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:14.890Z,1528894634.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s.
2018-06-13T12:57:14.890Z,1528894634.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:15.351Z,1528894635.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T12:57:15.352Z,1528894635.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:15.690Z,1528894635.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2018-06-13T12:57:15.691Z,1528894635.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:16.090Z,1528894636.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2018-06-13T12:57:16.091Z,1528894636.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:16.485Z,1528894636.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-06-13T12:57:16.486Z,1528894636.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:16.885Z,1528894636.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2018-06-13T12:57:16.886Z,1528894636.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:17.291Z,1528894637.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-06-13T12:57:17.292Z,1528894637.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:17.702Z,1528894637.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T12:57:17.703Z,1528894637.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:18.085Z,1528894638.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T12:57:18.086Z,1528894638.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:18.491Z,1528894638.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T12:57:18.492Z,1528894638.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:18.885Z,1528894638.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T12:57:18.886Z,1528894638.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:19.246Z,1528894639.246 [NAL9602](INFO): Powering up NAL9602
2018-06-13T12:57:19.290Z,1528894639.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T12:57:19.291Z,1528894639.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:19.691Z,1528894639.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T12:57:19.691Z,1528894639.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:20.091Z,1528894640.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T12:57:20.092Z,1528894640.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:20.490Z,1528894640.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T12:57:20.491Z,1528894640.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:20.891Z,1528894640.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T12:57:20.892Z,1528894640.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:21.285Z,1528894641.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T12:57:21.286Z,1528894641.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:21.689Z,1528894641.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T12:57:21.690Z,1528894641.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:22.091Z,1528894642.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T12:57:22.092Z,1528894642.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:22.492Z,1528894642.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T12:57:22.494Z,1528894642.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:22.885Z,1528894642.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T12:57:22.886Z,1528894642.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:23.294Z,1528894643.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T12:57:23.295Z,1528894643.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:23.686Z,1528894643.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T12:57:23.686Z,1528894643.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:24.086Z,1528894644.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T12:57:24.087Z,1528894644.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:24.489Z,1528894644.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T12:57:24.490Z,1528894644.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:24.890Z,1528894644.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-06-13T12:57:24.891Z,1528894644.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:25.287Z,1528894645.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-06-13T12:57:25.288Z,1528894645.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:25.705Z,1528894645.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-06-13T12:57:25.706Z,1528894645.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:26.086Z,1528894646.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T12:57:26.086Z,1528894646.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:26.486Z,1528894646.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-06-13T12:57:26.487Z,1528894646.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:26.891Z,1528894646.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T12:57:26.892Z,1528894646.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:27.295Z,1528894647.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-06-13T12:57:27.296Z,1528894647.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:27.689Z,1528894647.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T12:57:27.690Z,1528894647.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:28.091Z,1528894648.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T12:57:28.092Z,1528894648.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:28.491Z,1528894648.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-06-13T12:57:28.492Z,1528894648.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:28.887Z,1528894648.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-06-13T12:57:28.888Z,1528894648.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:29.293Z,1528894649.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T12:57:29.294Z,1528894649.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:29.700Z,1528894649.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T12:57:29.701Z,1528894649.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:30.048Z,1528894650.048 [NAL9602](INFO): NAL9602 initialized
2018-06-13T12:57:30.098Z,1528894650.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T12:57:30.099Z,1528894650.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:30.492Z,1528894650.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T12:57:30.494Z,1528894650.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:30.903Z,1528894650.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T12:57:30.904Z,1528894650.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:31.302Z,1528894651.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T12:57:31.303Z,1528894651.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:31.699Z,1528894651.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T12:57:31.700Z,1528894651.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:32.096Z,1528894652.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T12:57:32.097Z,1528894652.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:32.491Z,1528894652.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:32.894Z,1528894652.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:33.303Z,1528894653.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:36.432Z,1528894656.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:36.587Z,1528894656.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:36.976Z,1528894656.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:37.386Z,1528894657.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:37.764Z,1528894657.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:38.188Z,1528894658.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:38.586Z,1528894658.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:38.990Z,1528894658.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:39.385Z,1528894659.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:39.768Z,1528894659.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:40.169Z,1528894660.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:40.568Z,1528894660.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:40.996Z,1528894660.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:41.396Z,1528894661.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:41.795Z,1528894661.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:42.170Z,1528894662.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:42.567Z,1528894662.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:42.979Z,1528894662.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:43.403Z,1528894663.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:43.775Z,1528894663.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:44.174Z,1528894664.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:44.567Z,1528894664.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:44.980Z,1528894664.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:45.379Z,1528894665.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:45.775Z,1528894665.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:46.178Z,1528894666.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:46.572Z,1528894666.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:46.984Z,1528894666.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:47.379Z,1528894667.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:47.780Z,1528894667.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:48.172Z,1528894668.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:48.571Z,1528894668.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:48.981Z,1528894668.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:49.381Z,1528894669.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:49.780Z,1528894669.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:50.172Z,1528894670.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:50.570Z,1528894670.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:50.980Z,1528894670.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:51.379Z,1528894671.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:51.780Z,1528894671.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:52.172Z,1528894672.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:52.572Z,1528894672.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:52.980Z,1528894672.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:53.378Z,1528894673.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:53.784Z,1528894673.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:54.171Z,1528894674.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:54.570Z,1528894674.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:54.979Z,1528894674.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:55.379Z,1528894675.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:55.780Z,1528894675.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:56.176Z,1528894676.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:56.571Z,1528894676.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:56.980Z,1528894676.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:57.379Z,1528894677.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:57.780Z,1528894677.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:58.167Z,1528894678.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:58.572Z,1528894678.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:58.975Z,1528894678.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:59.379Z,1528894679.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:57:59.779Z,1528894679.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:00.166Z,1528894680.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:00.571Z,1528894680.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:00.979Z,1528894680.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:01.380Z,1528894681.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:01.780Z,1528894681.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:02.176Z,1528894682.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:02.570Z,1528894682.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:02.980Z,1528894682.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:03.384Z,1528894683.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:03.775Z,1528894683.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:04.171Z,1528894684.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:04.571Z,1528894684.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:04.980Z,1528894684.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:05.379Z,1528894685.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:05.779Z,1528894685.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:06.171Z,1528894686.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:06.570Z,1528894686.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:06.979Z,1528894686.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:07.379Z,1528894687.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:07.776Z,1528894687.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:08.173Z,1528894688.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:08.568Z,1528894688.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:08.980Z,1528894688.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:09.379Z,1528894689.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:09.779Z,1528894689.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:10.172Z,1528894690.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:10.572Z,1528894690.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:10.976Z,1528894690.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:11.384Z,1528894691.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:11.780Z,1528894691.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:12.172Z,1528894692.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:12.576Z,1528894692.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:12.980Z,1528894692.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:13.380Z,1528894693.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:13.776Z,1528894693.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:14.172Z,1528894694.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:14.570Z,1528894694.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:14.980Z,1528894694.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:15.379Z,1528894695.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:15.780Z,1528894695.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:16.171Z,1528894696.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:16.571Z,1528894696.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:16.984Z,1528894696.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:17.380Z,1528894697.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:17.779Z,1528894697.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:18.170Z,1528894698.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:18.572Z,1528894698.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:18.971Z,1528894698.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:19.380Z,1528894699.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:19.779Z,1528894699.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:20.179Z,1528894700.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:20.568Z,1528894700.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:20.971Z,1528894700.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:21.372Z,1528894701.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:21.776Z,1528894701.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:22.177Z,1528894702.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:22.577Z,1528894702.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:22.979Z,1528894702.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:23.372Z,1528894703.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:23.772Z,1528894703.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:24.171Z,1528894704.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:24.573Z,1528894704.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:24.973Z,1528894704.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:25.380Z,1528894705.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:25.780Z,1528894705.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:26.177Z,1528894706.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:26.574Z,1528894706.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:26.974Z,1528894706.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:27.371Z,1528894707.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:27.768Z,1528894707.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:28.179Z,1528894708.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:28.579Z,1528894708.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:28.980Z,1528894708.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:29.374Z,1528894709.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:29.777Z,1528894709.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:32.884Z,1528894712.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:33.033Z,1528894713.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:33.467Z,1528894713.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:33.863Z,1528894713.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:34.259Z,1528894714.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:34.632Z,1528894714.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:35.031Z,1528894715.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:35.433Z,1528894715.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:35.831Z,1528894715.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:36.235Z,1528894716.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:36.664Z,1528894716.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:37.044Z,1528894717.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:37.436Z,1528894717.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:37.836Z,1528894717.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:38.235Z,1528894718.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:38.632Z,1528894718.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:39.039Z,1528894719.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:39.444Z,1528894719.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:39.839Z,1528894719.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:40.235Z,1528894720.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:40.630Z,1528894720.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:41.036Z,1528894721.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:41.444Z,1528894721.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:41.844Z,1528894721.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:42.240Z,1528894722.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:42.634Z,1528894722.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:43.038Z,1528894723.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:43.440Z,1528894723.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:43.839Z,1528894723.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:44.233Z,1528894724.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:44.636Z,1528894724.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:45.039Z,1528894725.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:45.438Z,1528894725.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:45.839Z,1528894725.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:46.240Z,1528894726.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:46.634Z,1528894726.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:47.039Z,1528894727.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:47.442Z,1528894727.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:47.844Z,1528894727.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:48.234Z,1528894728.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:48.634Z,1528894728.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:49.072Z,1528894729.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:49.443Z,1528894729.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:49.839Z,1528894729.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:50.236Z,1528894730.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:50.637Z,1528894730.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:51.039Z,1528894731.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:51.470Z,1528894731.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:51.839Z,1528894731.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:52.237Z,1528894732.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:52.634Z,1528894732.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:53.040Z,1528894733.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:53.442Z,1528894733.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:53.848Z,1528894733.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:54.240Z,1528894734.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:54.643Z,1528894734.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:55.069Z,1528894735.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:55.443Z,1528894735.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:55.839Z,1528894735.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:56.239Z,1528894736.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:56.637Z,1528894736.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:57.040Z,1528894737.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:57.444Z,1528894737.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:57.844Z,1528894737.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:58.240Z,1528894738.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:58.638Z,1528894738.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:59.043Z,1528894739.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:59.443Z,1528894739.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:58:59.844Z,1528894739.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:00.237Z,1528894740.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:00.635Z,1528894740.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:01.043Z,1528894741.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:01.443Z,1528894741.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:01.847Z,1528894741.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:02.244Z,1528894742.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:02.637Z,1528894742.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:03.036Z,1528894743.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:03.447Z,1528894743.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:03.843Z,1528894743.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:04.243Z,1528894744.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:04.650Z,1528894744.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:05.048Z,1528894745.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:05.442Z,1528894745.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:05.839Z,1528894745.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:06.250Z,1528894746.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:06.657Z,1528894746.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:07.060Z,1528894747.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:07.448Z,1528894747.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:07.838Z,1528894747.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:08.243Z,1528894748.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:08.642Z,1528894748.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:09.038Z,1528894749.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:09.456Z,1528894749.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:09.848Z,1528894749.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:10.254Z,1528894750.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:10.641Z,1528894750.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:11.042Z,1528894751.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:11.443Z,1528894751.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:11.848Z,1528894751.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:12.244Z,1528894752.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:12.650Z,1528894752.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:13.051Z,1528894753.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:13.438Z,1528894753.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:13.848Z,1528894753.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:14.243Z,1528894754.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:14.640Z,1528894754.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:15.048Z,1528894755.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:15.454Z,1528894755.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:15.852Z,1528894755.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:16.256Z,1528894756.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:16.645Z,1528894756.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:17.037Z,1528894757.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:17.430Z,1528894757.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:17.843Z,1528894757.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:18.256Z,1528894758.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:18.655Z,1528894758.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:19.057Z,1528894759.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:19.430Z,1528894759.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:19.836Z,1528894759.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:20.235Z,1528894760.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:20.637Z,1528894760.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:21.036Z,1528894761.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:21.459Z,1528894761.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:21.839Z,1528894761.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:22.239Z,1528894762.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:22.638Z,1528894762.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:23.037Z,1528894763.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:23.439Z,1528894763.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:23.836Z,1528894763.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:24.241Z,1528894764.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:24.648Z,1528894764.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:25.043Z,1528894765.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:25.435Z,1528894765.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:25.858Z,1528894765.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:26.238Z,1528894766.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:26.640Z,1528894766.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:27.036Z,1528894767.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:27.446Z,1528894767.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:27.846Z,1528894767.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:28.241Z,1528894768.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:28.639Z,1528894768.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:29.042Z,1528894769.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:29.439Z,1528894769.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:29.844Z,1528894769.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:30.266Z,1528894770.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:30.666Z,1528894770.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:31.048Z,1528894771.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:34.138Z,1528894774.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:34.286Z,1528894774.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:34.691Z,1528894774.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:35.087Z,1528894775.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:35.492Z,1528894775.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:35.888Z,1528894775.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:36.276Z,1528894776.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:36.680Z,1528894776.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:37.082Z,1528894777.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:37.492Z,1528894777.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:37.891Z,1528894777.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:38.288Z,1528894778.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:38.681Z,1528894778.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:39.083Z,1528894779.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:39.482Z,1528894779.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:39.881Z,1528894779.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:40.293Z,1528894780.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:40.698Z,1528894780.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:41.100Z,1528894781.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:41.488Z,1528894781.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:41.888Z,1528894781.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:42.283Z,1528894782.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:42.685Z,1528894782.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:43.084Z,1528894783.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:43.497Z,1528894783.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:43.892Z,1528894783.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:44.298Z,1528894784.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:44.680Z,1528894784.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:45.082Z,1528894785.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:45.486Z,1528894785.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:45.884Z,1528894785.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:46.290Z,1528894786.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:46.696Z,1528894786.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:47.092Z,1528894787.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:47.484Z,1528894787.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:47.886Z,1528894787.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:48.286Z,1528894788.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:48.691Z,1528894788.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:49.088Z,1528894789.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:49.491Z,1528894789.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:49.896Z,1528894789.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:50.298Z,1528894790.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:50.689Z,1528894790.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:51.090Z,1528894791.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:51.495Z,1528894791.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:51.880Z,1528894791.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:52.305Z,1528894792.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:52.706Z,1528894792.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:53.105Z,1528894793.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:53.478Z,1528894793.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:53.883Z,1528894793.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:54.282Z,1528894794.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:54.682Z,1528894794.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:55.107Z,1528894795.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:55.488Z,1528894795.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:55.909Z,1528894795.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:56.310Z,1528894796.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:56.681Z,1528894796.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:57.089Z,1528894797.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:57.482Z,1528894797.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:57.896Z,1528894797.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:58.316Z,1528894798.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:58.689Z,1528894798.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:59.084Z,1528894799.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:59.496Z,1528894799.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T12:59:59.914Z,1528894799.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:00.288Z,1528894800.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:00.688Z,1528894800.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:01.096Z,1528894801.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:01.487Z,1528894801.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:01.896Z,1528894801.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:02.287Z,1528894802.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:02.713Z,1528894802.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:03.082Z,1528894803.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:03.488Z,1528894803.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:03.878Z,1528894803.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:04.313Z,1528894804.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:04.691Z,1528894804.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:05.086Z,1528894805.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:05.482Z,1528894805.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:05.896Z,1528894805.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:06.288Z,1528894806.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:06.683Z,1528894806.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:07.085Z,1528894807.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:07.513Z,1528894807.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:07.891Z,1528894807.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:08.290Z,1528894808.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:08.681Z,1528894808.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:09.111Z,1528894809.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:09.487Z,1528894809.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:09.883Z,1528894809.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:10.287Z,1528894810.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:10.711Z,1528894810.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:11.089Z,1528894811.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:11.484Z,1528894811.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:11.883Z,1528894811.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:12.313Z,1528894812.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:12.681Z,1528894812.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:13.098Z,1528894813.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:13.099Z,1528894813.099 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 191
2018-06-13T13:00:13.099Z,1528894813.099 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:00:13.100Z,1528894813.100 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:13.100Z,1528894813.100 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 191
2018-06-13T13:00:13.105Z,1528894813.105 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:00:13.107Z,1528894813.107 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:13.107Z,1528894813.107 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 191
2018-06-13T13:00:13.107Z,1528894813.107 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:00:13.197Z,1528894813.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:00:13.197Z,1528894813.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:00:13.197Z,1528894813.197 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:00:13.573Z,1528894813.573 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:00:13.573Z,1528894813.573 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 191
2018-06-13T13:00:13.574Z,1528894813.574 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:00:13.574Z,1528894813.574 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 191
2018-06-13T13:00:13.574Z,1528894813.574 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:00:13.574Z,1528894813.574 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 191
2018-06-13T13:00:13.904Z,1528894813.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:00:13.905Z,1528894813.905 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:00:13.906Z,1528894813.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:00:13.906Z,1528894813.906 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:00:13.906Z,1528894813.906 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:00:13.907Z,1528894813.907 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:00:13.907Z,1528894813.907 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:00:13.907Z,1528894813.907 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:00:13.908Z,1528894813.908 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:00:14.299Z,1528894814.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:00:14.300Z,1528894814.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:14.690Z,1528894814.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:00:14.691Z,1528894814.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:15.093Z,1528894815.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:00:15.094Z,1528894815.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:15.487Z,1528894815.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:00:15.488Z,1528894815.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:15.889Z,1528894815.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:00:15.891Z,1528894815.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:16.302Z,1528894816.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:00:16.303Z,1528894816.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:16.704Z,1528894816.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:00:16.705Z,1528894816.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:17.110Z,1528894817.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:00:17.111Z,1528894817.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:17.480Z,1528894817.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:00:17.486Z,1528894817.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:17.889Z,1528894817.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:00:17.890Z,1528894817.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:18.294Z,1528894818.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:00:18.295Z,1528894818.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:18.677Z,1528894818.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:00:18.678Z,1528894818.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:19.084Z,1528894819.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:00:19.101Z,1528894819.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:19.488Z,1528894819.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:00:19.506Z,1528894819.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:19.908Z,1528894819.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:00:19.909Z,1528894819.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:20.312Z,1528894820.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:00:20.313Z,1528894820.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:20.675Z,1528894820.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:00:20.676Z,1528894820.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:21.078Z,1528894821.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:00:21.079Z,1528894821.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:21.487Z,1528894821.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:00:21.488Z,1528894821.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:21.877Z,1528894821.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:00:21.878Z,1528894821.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:22.283Z,1528894822.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:00:22.284Z,1528894822.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:22.691Z,1528894822.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:00:22.713Z,1528894822.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:23.088Z,1528894823.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:00:23.089Z,1528894823.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:23.479Z,1528894823.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:00:23.480Z,1528894823.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:23.880Z,1528894823.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:00:23.880Z,1528894823.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:24.276Z,1528894824.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T13:00:24.277Z,1528894824.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:24.684Z,1528894824.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T13:00:24.686Z,1528894824.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:25.089Z,1528894825.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T13:00:25.090Z,1528894825.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:25.487Z,1528894825.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T13:00:25.488Z,1528894825.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:25.895Z,1528894825.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T13:00:25.913Z,1528894825.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:26.296Z,1528894826.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T13:00:26.297Z,1528894826.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:26.678Z,1528894826.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T13:00:26.679Z,1528894826.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:27.078Z,1528894827.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T13:00:27.079Z,1528894827.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:27.480Z,1528894827.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T13:00:27.480Z,1528894827.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:27.886Z,1528894827.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T13:00:27.888Z,1528894827.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:28.310Z,1528894828.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T13:00:28.311Z,1528894828.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:28.695Z,1528894828.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T13:00:28.696Z,1528894828.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:29.085Z,1528894829.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T13:00:29.086Z,1528894829.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:29.498Z,1528894829.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T13:00:29.500Z,1528894829.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:29.886Z,1528894829.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T13:00:29.887Z,1528894829.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:32.992Z,1528894832.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T13:00:32.993Z,1528894832.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:33.146Z,1528894833.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:33.546Z,1528894833.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:33.944Z,1528894833.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:34.347Z,1528894834.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:34.737Z,1528894834.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:35.138Z,1528894835.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:35.535Z,1528894835.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:35.937Z,1528894835.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:36.347Z,1528894836.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:36.756Z,1528894836.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:37.148Z,1528894837.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:37.546Z,1528894837.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:37.952Z,1528894837.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:38.341Z,1528894838.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:38.722Z,1528894838.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:39.124Z,1528894839.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:39.554Z,1528894839.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:39.947Z,1528894839.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:40.351Z,1528894840.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:40.725Z,1528894840.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:41.154Z,1528894841.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:41.525Z,1528894841.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:41.927Z,1528894841.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:42.331Z,1528894842.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:42.756Z,1528894842.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:43.136Z,1528894843.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:43.522Z,1528894843.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:43.926Z,1528894843.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:44.323Z,1528894844.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:44.719Z,1528894844.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:45.125Z,1528894845.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:45.532Z,1528894845.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:45.959Z,1528894845.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:46.328Z,1528894846.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:46.722Z,1528894846.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:47.125Z,1528894847.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:47.521Z,1528894847.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:47.922Z,1528894847.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:48.336Z,1528894848.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:48.735Z,1528894848.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:49.161Z,1528894849.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:49.518Z,1528894849.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:49.924Z,1528894849.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:50.329Z,1528894850.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:50.722Z,1528894850.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:51.122Z,1528894851.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:51.536Z,1528894851.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:51.932Z,1528894851.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:52.327Z,1528894852.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:52.719Z,1528894852.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:53.121Z,1528894853.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:53.523Z,1528894853.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:53.922Z,1528894853.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:54.327Z,1528894854.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:54.731Z,1528894854.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:55.158Z,1528894855.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:55.520Z,1528894855.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:55.924Z,1528894855.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:56.321Z,1528894856.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:56.722Z,1528894856.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:57.122Z,1528894857.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:57.526Z,1528894857.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:57.955Z,1528894857.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:58.336Z,1528894858.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:58.724Z,1528894858.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:59.128Z,1528894859.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:59.524Z,1528894859.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:00:59.924Z,1528894859.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:00.331Z,1528894860.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:00.735Z,1528894860.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:01.131Z,1528894861.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:01.523Z,1528894861.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:01.924Z,1528894861.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:02.324Z,1528894862.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:02.725Z,1528894862.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:03.122Z,1528894863.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:03.532Z,1528894863.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:03.931Z,1528894863.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:04.332Z,1528894864.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:04.724Z,1528894864.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:05.128Z,1528894865.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:05.527Z,1528894865.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:05.925Z,1528894865.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:06.332Z,1528894866.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:06.731Z,1528894866.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:07.138Z,1528894867.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:07.523Z,1528894867.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:07.928Z,1528894867.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:08.326Z,1528894868.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:08.725Z,1528894868.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:09.124Z,1528894869.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:09.537Z,1528894869.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:09.940Z,1528894869.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:10.340Z,1528894870.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:10.727Z,1528894870.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:11.121Z,1528894871.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:11.525Z,1528894871.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:11.923Z,1528894871.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:12.340Z,1528894872.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:12.740Z,1528894872.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:13.138Z,1528894873.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:13.534Z,1528894873.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:13.925Z,1528894873.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:14.328Z,1528894874.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:14.730Z,1528894874.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:15.129Z,1528894875.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:15.544Z,1528894875.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:15.934Z,1528894875.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:16.335Z,1528894876.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:16.731Z,1528894876.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:17.122Z,1528894877.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:17.526Z,1528894877.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:17.928Z,1528894877.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:18.330Z,1528894878.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:18.737Z,1528894878.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:19.140Z,1528894879.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:19.520Z,1528894879.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:19.932Z,1528894879.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:20.333Z,1528894880.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:20.730Z,1528894880.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:21.129Z,1528894881.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:21.538Z,1528894881.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:21.940Z,1528894881.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:22.333Z,1528894882.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:22.728Z,1528894882.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:23.132Z,1528894883.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:23.529Z,1528894883.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:23.917Z,1528894883.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:24.344Z,1528894884.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:24.744Z,1528894884.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:25.146Z,1528894885.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:25.515Z,1528894885.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:25.919Z,1528894885.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:26.320Z,1528894886.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:26.721Z,1528894886.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:27.119Z,1528894887.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:27.546Z,1528894887.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:27.944Z,1528894887.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:28.344Z,1528894888.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:28.720Z,1528894888.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:29.119Z,1528894889.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:29.521Z,1528894889.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:29.524Z,1528894889.524 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T13:01:29.524Z,1528894889.524 [Default:CheckIn:C.Wait] Stopped
2018-06-13T13:01:29.524Z,1528894889.524 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T13:01:29.524Z,1528894889.524 [Default:CheckIn:D] Running Loop=1
2018-06-13T13:01:29.934Z,1528894889.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:29.941Z,1528894889.941 [Default:CheckIn:D] Stopped
2018-06-13T13:01:29.941Z,1528894889.941 [Default:CheckIn:E] Running Loop=1
2018-06-13T13:01:33.040Z,1528894893.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:33.060Z,1528894893.060 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 574.274935 min 
2018-06-13T13:01:33.060Z,1528894893.060 [Default:CheckIn:E] Stopped
2018-06-13T13:01:33.060Z,1528894893.060 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T13:01:33.060Z,1528894893.060 [Default:CheckIn] Stopped
2018-06-13T13:01:33.060Z,1528894893.060 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T13:01:33.065Z,1528894893.065 [Default:CheckIn](INFO): Running loop #56
2018-06-13T13:01:33.065Z,1528894893.065 [Default:CheckIn] Running Loop=56
2018-06-13T13:01:33.065Z,1528894893.065 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T13:01:33.065Z,1528894893.065 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T13:01:33.227Z,1528894893.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:33.628Z,1528894893.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:34.025Z,1528894894.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:34.418Z,1528894894.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:34.781Z,1528894894.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:34.815Z,1528894894.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:35.179Z,1528894895.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:35.222Z,1528894895.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:35.589Z,1528894895.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:35.631Z,1528894895.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:35.993Z,1528894895.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:36.040Z,1528894896.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:36.394Z,1528894896.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:36.424Z,1528894896.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:36.783Z,1528894896.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:36.822Z,1528894896.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:37.181Z,1528894897.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:37.199Z,1528894897.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:37.586Z,1528894897.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:37.603Z,1528894897.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:37.984Z,1528894897.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:38.004Z,1528894898.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:38.389Z,1528894898.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:38.412Z,1528894898.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:38.794Z,1528894898.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:38.839Z,1528894898.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:39.189Z,1528894899.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:39.207Z,1528894899.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:39.586Z,1528894899.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:39.606Z,1528894899.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:39.979Z,1528894899.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:40.007Z,1528894900.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:40.384Z,1528894900.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:40.401Z,1528894900.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:40.784Z,1528894900.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:40.814Z,1528894900.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:41.185Z,1528894901.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:41.202Z,1528894901.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:41.590Z,1528894901.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:41.613Z,1528894901.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:41.993Z,1528894901.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:42.011Z,1528894902.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:42.390Z,1528894902.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:42.407Z,1528894902.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:42.785Z,1528894902.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:42.802Z,1528894902.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:43.186Z,1528894903.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:43.209Z,1528894903.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:43.587Z,1528894903.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:43.604Z,1528894903.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:43.984Z,1528894903.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:44.002Z,1528894904.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:44.393Z,1528894904.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:44.414Z,1528894904.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:44.794Z,1528894904.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:44.816Z,1528894904.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:45.190Z,1528894905.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:45.212Z,1528894905.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:45.586Z,1528894905.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:45.605Z,1528894905.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:45.984Z,1528894905.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:46.008Z,1528894906.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:46.385Z,1528894906.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:46.404Z,1528894906.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:46.780Z,1528894906.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:46.808Z,1528894906.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:47.179Z,1528894907.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:47.203Z,1528894907.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:47.590Z,1528894907.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:47.612Z,1528894907.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:47.993Z,1528894907.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:48.016Z,1528894908.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:48.392Z,1528894908.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:48.410Z,1528894908.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:48.785Z,1528894908.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:48.803Z,1528894908.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:49.186Z,1528894909.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:49.205Z,1528894909.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:49.579Z,1528894909.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:49.604Z,1528894909.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:49.984Z,1528894909.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:50.003Z,1528894910.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:50.395Z,1528894910.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:50.414Z,1528894910.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:50.794Z,1528894910.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:50.812Z,1528894910.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:51.195Z,1528894911.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:51.224Z,1528894911.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:51.586Z,1528894911.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:51.604Z,1528894911.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:51.975Z,1528894911.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:52.011Z,1528894912.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:52.383Z,1528894912.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:52.406Z,1528894912.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:52.787Z,1528894912.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:52.804Z,1528894912.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:53.186Z,1528894913.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:53.208Z,1528894913.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:53.598Z,1528894913.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:53.620Z,1528894913.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:54.000Z,1528894914.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:54.018Z,1528894914.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:54.395Z,1528894914.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:54.413Z,1528894914.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:54.779Z,1528894914.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:54.808Z,1528894914.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:55.179Z,1528894915.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:55.219Z,1528894915.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:55.580Z,1528894915.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:55.618Z,1528894915.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:55.983Z,1528894915.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:56.030Z,1528894916.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:56.394Z,1528894916.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:56.423Z,1528894916.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:56.793Z,1528894916.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:56.820Z,1528894916.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:57.189Z,1528894917.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:57.224Z,1528894917.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:57.582Z,1528894917.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:57.600Z,1528894917.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:57.980Z,1528894917.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:57.997Z,1528894917.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:58.382Z,1528894918.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:58.400Z,1528894918.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:58.783Z,1528894918.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:58.801Z,1528894918.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:59.181Z,1528894919.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:59.199Z,1528894919.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:59.589Z,1528894919.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:01:59.607Z,1528894919.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:01:59.994Z,1528894919.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:00.012Z,1528894920.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:00.394Z,1528894920.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:00.411Z,1528894920.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:00.786Z,1528894920.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:00.803Z,1528894920.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:01.187Z,1528894921.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:01.205Z,1528894921.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:01.579Z,1528894921.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:01.604Z,1528894921.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:01.986Z,1528894921.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:02.003Z,1528894922.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:02.394Z,1528894922.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:02.416Z,1528894922.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:02.795Z,1528894922.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:02.813Z,1528894922.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:03.196Z,1528894923.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:03.220Z,1528894923.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:03.586Z,1528894923.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:03.612Z,1528894923.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:03.975Z,1528894923.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:04.002Z,1528894924.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:04.379Z,1528894924.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:04.415Z,1528894924.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:04.780Z,1528894924.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:04.819Z,1528894924.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:05.179Z,1528894925.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:05.213Z,1528894925.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:05.596Z,1528894925.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:05.614Z,1528894925.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:06.000Z,1528894926.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:06.019Z,1528894926.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:06.395Z,1528894926.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:06.413Z,1528894926.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:06.779Z,1528894926.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:06.813Z,1528894926.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:07.179Z,1528894927.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:07.220Z,1528894927.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:07.576Z,1528894927.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:07.594Z,1528894927.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:07.979Z,1528894927.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:07.996Z,1528894927.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:08.397Z,1528894928.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:08.426Z,1528894928.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:08.797Z,1528894928.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:08.825Z,1528894928.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:09.193Z,1528894929.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:09.227Z,1528894929.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:09.584Z,1528894929.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:09.602Z,1528894929.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:09.978Z,1528894929.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:09.996Z,1528894929.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:10.382Z,1528894930.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:10.400Z,1528894930.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:10.784Z,1528894930.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:10.818Z,1528894930.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:11.179Z,1528894931.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:11.202Z,1528894931.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:11.591Z,1528894931.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:11.608Z,1528894931.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:11.993Z,1528894931.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:12.011Z,1528894932.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:12.390Z,1528894932.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:12.412Z,1528894932.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:12.783Z,1528894932.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:12.805Z,1528894932.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:13.186Z,1528894933.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:13.204Z,1528894933.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:13.579Z,1528894933.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:13.602Z,1528894933.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:13.983Z,1528894933.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:14.005Z,1528894934.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:14.393Z,1528894934.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:14.411Z,1528894934.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:14.794Z,1528894934.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:14.811Z,1528894934.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:15.190Z,1528894935.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:15.212Z,1528894935.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:15.583Z,1528894935.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:15.616Z,1528894935.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:15.979Z,1528894935.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:16.002Z,1528894936.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:16.384Z,1528894936.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:16.419Z,1528894936.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:16.787Z,1528894936.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:16.812Z,1528894936.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:17.181Z,1528894937.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:17.199Z,1528894937.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:17.590Z,1528894937.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:17.612Z,1528894937.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:17.993Z,1528894937.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:18.011Z,1528894938.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:18.390Z,1528894938.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:18.409Z,1528894938.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:18.783Z,1528894938.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:18.806Z,1528894938.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:19.187Z,1528894939.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:19.205Z,1528894939.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:19.586Z,1528894939.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:19.604Z,1528894939.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:19.983Z,1528894939.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:20.005Z,1528894940.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:20.395Z,1528894940.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:20.413Z,1528894940.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:20.793Z,1528894940.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:20.811Z,1528894940.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:21.195Z,1528894941.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:21.213Z,1528894941.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:21.586Z,1528894941.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:21.604Z,1528894941.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:21.981Z,1528894941.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:21.999Z,1528894941.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:22.384Z,1528894942.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:22.402Z,1528894942.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:22.786Z,1528894942.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:22.816Z,1528894942.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:23.175Z,1528894943.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:23.208Z,1528894943.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:23.595Z,1528894943.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:23.613Z,1528894943.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:23.000Z,1528894944.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:24.024Z,1528894944.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:24.395Z,1528894944.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:24.413Z,1528894944.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:24.783Z,1528894944.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:24.806Z,1528894944.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:25.186Z,1528894945.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:25.216Z,1528894945.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:25.576Z,1528894945.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:25.606Z,1528894945.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:25.984Z,1528894945.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:26.010Z,1528894946.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:26.400Z,1528894946.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:26.419Z,1528894946.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:26.798Z,1528894946.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:26.820Z,1528894946.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:27.194Z,1528894947.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:27.216Z,1528894947.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:27.583Z,1528894947.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:27.610Z,1528894947.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:27.975Z,1528894947.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:28.004Z,1528894948.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:28.396Z,1528894948.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:28.413Z,1528894948.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:28.800Z,1528894948.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:28.818Z,1528894948.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:29.195Z,1528894949.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:29.213Z,1528894949.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:29.590Z,1528894949.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:29.612Z,1528894949.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:29.990Z,1528894949.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:30.009Z,1528894950.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:33.102Z,1528894953.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:33.120Z,1528894953.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:33.283Z,1528894953.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:33.319Z,1528894953.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:33.669Z,1528894953.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:33.699Z,1528894953.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:34.055Z,1528894954.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:34.073Z,1528894954.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:34.454Z,1528894954.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:34.476Z,1528894954.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:34.856Z,1528894954.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:34.874Z,1528894954.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:35.254Z,1528894955.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:35.271Z,1528894955.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:35.666Z,1528894955.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:35.684Z,1528894955.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:36.067Z,1528894956.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:36.102Z,1528894956.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:36.466Z,1528894956.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:36.484Z,1528894956.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:36.857Z,1528894956.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:36.875Z,1528894956.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:37.258Z,1528894957.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:37.276Z,1528894957.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:37.654Z,1528894957.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:37.676Z,1528894957.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:38.057Z,1528894958.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:38.075Z,1528894958.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:38.467Z,1528894958.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:38.485Z,1528894958.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:38.869Z,1528894958.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:38.887Z,1528894958.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:39.292Z,1528894959.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:39.318Z,1528894959.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:39.658Z,1528894959.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:39.692Z,1528894959.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:40.057Z,1528894960.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:40.075Z,1528894960.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:40.447Z,1528894960.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:40.485Z,1528894960.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:40.853Z,1528894960.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:40.900Z,1528894960.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:41.251Z,1528894961.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:41.283Z,1528894961.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:41.668Z,1528894961.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:41.692Z,1528894961.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:42.071Z,1528894962.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:42.108Z,1528894962.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:42.467Z,1528894962.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:42.485Z,1528894962.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:42.851Z,1528894962.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:42.888Z,1528894962.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:43.252Z,1528894963.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:43.286Z,1528894963.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:43.656Z,1528894963.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:43.695Z,1528894963.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:44.051Z,1528894964.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:44.077Z,1528894964.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:44.465Z,1528894964.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:44.494Z,1528894964.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:44.861Z,1528894964.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:44.892Z,1528894964.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:45.316Z,1528894965.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:45.343Z,1528894965.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:45.656Z,1528894965.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:45.704Z,1528894965.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:46.055Z,1528894966.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:46.089Z,1528894966.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:46.455Z,1528894966.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:46.472Z,1528894966.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:46.855Z,1528894966.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:46.873Z,1528894966.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:47.254Z,1528894967.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:47.271Z,1528894967.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:47.670Z,1528894967.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:47.704Z,1528894967.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:48.064Z,1528894968.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:48.082Z,1528894968.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:48.463Z,1528894968.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:48.481Z,1528894968.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:48.856Z,1528894968.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:48.886Z,1528894968.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:49.254Z,1528894969.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:49.272Z,1528894969.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:49.650Z,1528894969.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:49.684Z,1528894969.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:50.057Z,1528894970.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:50.075Z,1528894970.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:50.468Z,1528894970.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:50.486Z,1528894970.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:50.866Z,1528894970.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:50.888Z,1528894970.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:51.266Z,1528894971.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:51.284Z,1528894971.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:51.647Z,1528894971.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:51.675Z,1528894971.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:52.047Z,1528894972.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:52.082Z,1528894972.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:52.452Z,1528894972.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:52.482Z,1528894972.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:52.848Z,1528894972.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:52.885Z,1528894972.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:53.248Z,1528894973.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:53.285Z,1528894973.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:53.661Z,1528894973.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:53.698Z,1528894973.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:54.061Z,1528894974.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:54.089Z,1528894974.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:54.461Z,1528894974.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:54.490Z,1528894974.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:54.851Z,1528894974.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:54.885Z,1528894974.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:55.248Z,1528894975.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:55.265Z,1528894975.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:55.648Z,1528894975.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:55.672Z,1528894975.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:56.050Z,1528894976.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:56.072Z,1528894976.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:56.465Z,1528894976.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:56.503Z,1528894976.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:56.865Z,1528894976.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:56.898Z,1528894976.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:57.266Z,1528894977.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:57.298Z,1528894977.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:57.654Z,1528894977.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:57.671Z,1528894977.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:58.050Z,1528894978.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:58.068Z,1528894978.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:58.454Z,1528894978.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:58.472Z,1528894978.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:58.854Z,1528894978.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:58.872Z,1528894978.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:59.250Z,1528894979.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:59.269Z,1528894979.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:02:59.665Z,1528894979.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:02:59.699Z,1528894979.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:00.061Z,1528894980.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:00.078Z,1528894980.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:00.458Z,1528894980.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:00.475Z,1528894980.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:00.854Z,1528894980.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:00.872Z,1528894980.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:01.254Z,1528894981.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:01.271Z,1528894981.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:01.654Z,1528894981.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:01.680Z,1528894981.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:02.058Z,1528894982.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:02.076Z,1528894982.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:02.462Z,1528894982.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:02.480Z,1528894982.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:02.862Z,1528894982.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:02.884Z,1528894982.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:03.262Z,1528894983.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:03.280Z,1528894983.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:03.657Z,1528894983.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:03.675Z,1528894983.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:04.058Z,1528894984.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:04.076Z,1528894984.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:04.457Z,1528894984.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:04.474Z,1528894984.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:04.854Z,1528894984.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:04.872Z,1528894984.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:05.257Z,1528894985.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:05.275Z,1528894985.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:05.662Z,1528894985.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:05.680Z,1528894985.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:06.065Z,1528894986.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:06.083Z,1528894986.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:06.462Z,1528894986.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:06.480Z,1528894986.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:06.860Z,1528894986.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:06.878Z,1528894986.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:07.254Z,1528894987.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:07.271Z,1528894987.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:07.650Z,1528894987.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:07.680Z,1528894987.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:08.051Z,1528894988.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:08.087Z,1528894988.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:08.467Z,1528894988.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:08.485Z,1528894988.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:08.871Z,1528894988.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:08.889Z,1528894988.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:09.268Z,1528894989.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:09.285Z,1528894989.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:09.651Z,1528894989.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:09.679Z,1528894989.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:10.051Z,1528894990.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:10.079Z,1528894990.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:10.467Z,1528894990.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:10.485Z,1528894990.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:10.873Z,1528894990.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:10.890Z,1528894990.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:11.274Z,1528894991.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:11.296Z,1528894991.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:11.651Z,1528894991.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:11.688Z,1528894991.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:12.051Z,1528894992.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:12.079Z,1528894992.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:12.452Z,1528894992.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:12.479Z,1528894992.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:12.851Z,1528894992.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:12.889Z,1528894992.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:13.252Z,1528894993.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:13.279Z,1528894993.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:13.669Z,1528894993.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:13.687Z,1528894993.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:14.072Z,1528894994.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:14.090Z,1528894994.090 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:14.090Z,1528894994.090 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 192
2018-06-13T13:03:14.090Z,1528894994.090 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:03:14.092Z,1528894994.092 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:14.092Z,1528894994.092 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 192
2018-06-13T13:03:14.092Z,1528894994.092 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:03:14.094Z,1528894994.094 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:14.094Z,1528894994.094 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 192
2018-06-13T13:03:14.094Z,1528894994.094 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:03:14.185Z,1528894994.185 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:03:14.185Z,1528894994.185 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:03:14.186Z,1528894994.186 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:03:14.477Z,1528894994.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:14.569Z,1528894994.569 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:03:14.569Z,1528894994.569 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 192
2018-06-13T13:03:14.569Z,1528894994.569 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:03:14.570Z,1528894994.570 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 192
2018-06-13T13:03:14.570Z,1528894994.570 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:03:14.570Z,1528894994.570 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 192
2018-06-13T13:03:14.851Z,1528894994.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:14.878Z,1528894994.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:03:14.879Z,1528894994.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:03:14.879Z,1528894994.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:03:14.879Z,1528894994.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:03:14.880Z,1528894994.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:03:14.880Z,1528894994.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:03:14.880Z,1528894994.880 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:03:14.881Z,1528894994.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:03:14.881Z,1528894994.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:03:15.251Z,1528894995.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:15.280Z,1528894995.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:03:15.285Z,1528894995.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:15.652Z,1528894995.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:15.694Z,1528894995.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:03:15.695Z,1528894995.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:16.051Z,1528894996.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:16.068Z,1528894996.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:03:16.082Z,1528894996.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:16.461Z,1528894996.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:16.496Z,1528894996.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:03:16.498Z,1528894996.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:16.865Z,1528894996.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:16.894Z,1528894996.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:03:16.895Z,1528894996.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:17.261Z,1528894997.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:17.295Z,1528894997.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:03:17.296Z,1528894997.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:17.650Z,1528894997.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:17.668Z,1528894997.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:03:17.670Z,1528894997.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:18.051Z,1528894998.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:18.068Z,1528894998.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:03:18.069Z,1528894998.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:18.469Z,1528894998.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:18.496Z,1528894998.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:03:18.497Z,1528894998.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:18.869Z,1528894998.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:18.896Z,1528894998.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:03:18.896Z,1528894998.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:19.269Z,1528894999.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:19.297Z,1528894999.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:03:19.298Z,1528894999.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:19.656Z,1528894999.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:19.696Z,1528894999.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:03:19.701Z,1528894999.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:20.054Z,1528895000.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:20.071Z,1528895000.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:03:20.072Z,1528895000.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:20.465Z,1528895000.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:20.505Z,1528895000.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:03:20.506Z,1528895000.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:20.865Z,1528895000.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:20.898Z,1528895000.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:03:20.899Z,1528895000.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:21.265Z,1528895001.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:21.282Z,1528895001.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:03:21.283Z,1528895001.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:21.657Z,1528895001.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:21.675Z,1528895001.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:03:21.676Z,1528895001.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:22.056Z,1528895002.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:22.080Z,1528895002.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:03:22.081Z,1528895002.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:22.462Z,1528895002.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:22.480Z,1528895002.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:03:22.481Z,1528895002.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:22.865Z,1528895002.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:22.882Z,1528895002.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:03:22.883Z,1528895002.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:23.266Z,1528895003.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:23.283Z,1528895003.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:03:23.284Z,1528895003.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:23.657Z,1528895003.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:23.674Z,1528895003.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:03:23.675Z,1528895003.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:24.058Z,1528895004.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:24.076Z,1528895004.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:03:24.076Z,1528895004.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:24.462Z,1528895004.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:24.480Z,1528895004.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:03:24.481Z,1528895004.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:24.865Z,1528895004.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:24.883Z,1528895004.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:03:24.884Z,1528895004.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:25.265Z,1528895005.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:25.283Z,1528895005.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T13:03:25.284Z,1528895005.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:25.657Z,1528895005.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:25.674Z,1528895005.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T13:03:25.675Z,1528895005.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:26.058Z,1528895006.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:26.080Z,1528895006.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T13:03:26.081Z,1528895006.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:26.465Z,1528895006.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:26.483Z,1528895006.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T13:03:26.484Z,1528895006.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:26.861Z,1528895006.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:26.879Z,1528895006.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T13:03:26.880Z,1528895006.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:27.263Z,1528895007.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:27.280Z,1528895007.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T13:03:27.281Z,1528895007.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:27.658Z,1528895007.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:27.675Z,1528895007.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T13:03:27.676Z,1528895007.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:28.054Z,1528895008.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:28.071Z,1528895008.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T13:03:28.072Z,1528895008.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:28.462Z,1528895008.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:28.480Z,1528895008.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T13:03:28.481Z,1528895008.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:28.866Z,1528895008.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:28.887Z,1528895008.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T13:03:28.888Z,1528895008.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:29.258Z,1528895009.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:29.277Z,1528895009.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T13:03:29.278Z,1528895009.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:29.658Z,1528895009.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:29.676Z,1528895009.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T13:03:29.677Z,1528895009.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:30.061Z,1528895010.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:30.080Z,1528895010.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T13:03:30.081Z,1528895010.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:33.185Z,1528895013.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:33.211Z,1528895013.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T13:03:33.212Z,1528895013.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:33.337Z,1528895013.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:33.402Z,1528895013.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T13:03:33.403Z,1528895013.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:33.749Z,1528895013.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:33.767Z,1528895013.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T13:03:33.767Z,1528895013.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:34.124Z,1528895014.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:34.150Z,1528895014.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:34.523Z,1528895014.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:34.541Z,1528895014.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:34.927Z,1528895014.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:34.976Z,1528895014.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:35.320Z,1528895015.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:35.340Z,1528895015.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:35.738Z,1528895015.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:35.772Z,1528895015.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:36.142Z,1528895016.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:36.179Z,1528895016.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:36.530Z,1528895016.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:36.548Z,1528895016.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:36.928Z,1528895016.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:36.947Z,1528895016.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:37.327Z,1528895017.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:37.372Z,1528895017.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:37.730Z,1528895017.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:37.748Z,1528895017.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:38.128Z,1528895018.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:38.147Z,1528895018.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:38.538Z,1528895018.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:38.556Z,1528895018.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:38.934Z,1528895018.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:38.952Z,1528895018.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:39.334Z,1528895019.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:39.357Z,1528895019.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:39.730Z,1528895019.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:39.748Z,1528895019.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:40.122Z,1528895020.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:40.156Z,1528895020.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:40.527Z,1528895020.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:40.549Z,1528895020.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:40.931Z,1528895020.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:40.949Z,1528895020.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:41.322Z,1528895021.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:41.354Z,1528895021.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:41.738Z,1528895021.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:41.760Z,1528895021.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:42.139Z,1528895022.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:42.164Z,1528895022.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:42.535Z,1528895022.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:42.553Z,1528895022.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:42.927Z,1528895022.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:42.950Z,1528895022.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:43.330Z,1528895023.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:43.348Z,1528895023.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:43.730Z,1528895023.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:43.748Z,1528895023.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:44.126Z,1528895024.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:44.150Z,1528895024.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:44.543Z,1528895024.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:44.562Z,1528895024.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:44.940Z,1528895024.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:44.964Z,1528895024.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:45.339Z,1528895025.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:45.364Z,1528895025.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:45.723Z,1528895025.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:45.758Z,1528895025.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:46.123Z,1528895026.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:46.156Z,1528895026.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:46.523Z,1528895026.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:46.560Z,1528895026.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:46.925Z,1528895026.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:46.956Z,1528895026.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:47.319Z,1528895027.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:47.352Z,1528895027.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:47.733Z,1528895027.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:47.761Z,1528895027.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:48.144Z,1528895028.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:48.162Z,1528895028.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:48.533Z,1528895028.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:48.568Z,1528895028.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:48.923Z,1528895028.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:48.956Z,1528895028.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:49.323Z,1528895029.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:49.340Z,1528895029.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:49.728Z,1528895029.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:49.761Z,1528895029.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:50.127Z,1528895030.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:50.144Z,1528895030.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:50.537Z,1528895030.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:50.572Z,1528895030.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:50.937Z,1528895030.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:50.971Z,1528895030.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:51.337Z,1528895031.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:51.370Z,1528895031.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:51.727Z,1528895031.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:51.745Z,1528895031.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:52.122Z,1528895032.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:52.140Z,1528895032.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:52.526Z,1528895032.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:52.544Z,1528895032.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:52.926Z,1528895032.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:52.944Z,1528895032.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:53.326Z,1528895033.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:53.343Z,1528895033.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:53.738Z,1528895033.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:53.756Z,1528895033.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:54.137Z,1528895034.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:54.155Z,1528895034.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:54.530Z,1528895034.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:54.552Z,1528895034.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:54.928Z,1528895034.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:54.946Z,1528895034.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:55.330Z,1528895035.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:55.348Z,1528895035.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:55.730Z,1528895035.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:55.748Z,1528895035.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:56.129Z,1528895036.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:56.147Z,1528895036.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:56.537Z,1528895036.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:56.556Z,1528895036.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:56.934Z,1528895036.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:56.951Z,1528895036.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:57.333Z,1528895037.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:57.352Z,1528895037.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:57.728Z,1528895037.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:57.758Z,1528895037.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:58.133Z,1528895038.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:58.152Z,1528895038.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:58.539Z,1528895038.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:58.557Z,1528895038.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:58.939Z,1528895038.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:58.957Z,1528895038.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:59.334Z,1528895039.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:59.364Z,1528895039.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:03:59.728Z,1528895039.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:03:59.754Z,1528895039.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:00.127Z,1528895040.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:00.153Z,1528895040.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:00.540Z,1528895040.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:00.564Z,1528895040.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:00.942Z,1528895040.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:00.964Z,1528895040.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:01.343Z,1528895041.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:01.368Z,1528895041.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:01.720Z,1528895041.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:01.755Z,1528895041.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:02.126Z,1528895042.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:02.150Z,1528895042.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:02.544Z,1528895042.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:02.609Z,1528895042.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:02.933Z,1528895042.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:02.952Z,1528895042.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:03.337Z,1528895043.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:03.371Z,1528895043.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:03.726Z,1528895043.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:03.744Z,1528895043.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:04.123Z,1528895044.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:04.151Z,1528895044.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:04.533Z,1528895044.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:04.552Z,1528895044.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:04.937Z,1528895044.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:04.955Z,1528895044.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:05.331Z,1528895045.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:05.349Z,1528895045.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:05.728Z,1528895045.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:05.746Z,1528895045.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:06.129Z,1528895046.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:06.152Z,1528895046.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:06.530Z,1528895046.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:06.552Z,1528895046.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:06.937Z,1528895046.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:06.955Z,1528895046.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:07.337Z,1528895047.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:07.356Z,1528895047.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:07.729Z,1528895047.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:07.747Z,1528895047.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:08.129Z,1528895048.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:08.147Z,1528895048.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:08.538Z,1528895048.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:08.556Z,1528895048.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:08.938Z,1528895048.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:08.955Z,1528895048.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:09.338Z,1528895049.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:09.356Z,1528895049.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:09.728Z,1528895049.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:09.763Z,1528895049.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:10.131Z,1528895050.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:10.148Z,1528895050.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:10.534Z,1528895050.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:10.564Z,1528895050.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:10.945Z,1528895050.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:10.963Z,1528895050.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:11.337Z,1528895051.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:11.355Z,1528895051.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:11.724Z,1528895051.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:11.759Z,1528895051.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:12.123Z,1528895052.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:12.167Z,1528895052.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:12.544Z,1528895052.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:12.563Z,1528895052.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:12.942Z,1528895052.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:12.968Z,1528895052.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:13.343Z,1528895053.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:13.368Z,1528895053.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:13.720Z,1528895053.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:13.756Z,1528895053.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:14.123Z,1528895054.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:14.159Z,1528895054.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:14.545Z,1528895054.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:14.563Z,1528895054.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:14.946Z,1528895054.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:14.963Z,1528895054.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:15.340Z,1528895055.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:15.364Z,1528895055.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:15.724Z,1528895055.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:15.756Z,1528895055.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:16.119Z,1528895056.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:16.147Z,1528895056.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:16.539Z,1528895056.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:16.564Z,1528895056.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:16.944Z,1528895056.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:16.963Z,1528895056.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:17.339Z,1528895057.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:17.358Z,1528895057.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:17.734Z,1528895057.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:17.752Z,1528895057.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:18.123Z,1528895058.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:18.152Z,1528895058.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:18.539Z,1528895058.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:18.558Z,1528895058.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:18.943Z,1528895058.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:18.970Z,1528895058.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:19.343Z,1528895059.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:19.368Z,1528895059.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:19.732Z,1528895059.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:19.750Z,1528895059.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:20.123Z,1528895060.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:20.159Z,1528895060.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:20.543Z,1528895060.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:20.562Z,1528895060.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:20.939Z,1528895060.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:20.957Z,1528895060.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:21.339Z,1528895061.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:21.357Z,1528895061.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:21.724Z,1528895061.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:21.766Z,1528895061.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:22.123Z,1528895062.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:22.150Z,1528895062.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:22.536Z,1528895062.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:22.554Z,1528895062.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:22.944Z,1528895062.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:22.962Z,1528895062.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:23.335Z,1528895063.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:23.353Z,1528895063.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:23.724Z,1528895063.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:23.758Z,1528895063.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:24.123Z,1528895064.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:24.158Z,1528895064.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:24.534Z,1528895064.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:24.562Z,1528895064.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:24.943Z,1528895064.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:24.961Z,1528895064.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:25.344Z,1528895065.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:25.362Z,1528895065.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:25.724Z,1528895065.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:25.758Z,1528895065.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:26.123Z,1528895066.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:26.140Z,1528895066.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:26.538Z,1528895066.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:26.568Z,1528895066.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:26.937Z,1528895066.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:26.964Z,1528895066.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:27.333Z,1528895067.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:27.371Z,1528895067.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:27.727Z,1528895067.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:27.768Z,1528895067.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:28.123Z,1528895068.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:28.164Z,1528895068.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:28.537Z,1528895068.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:28.571Z,1528895068.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:28.941Z,1528895068.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:28.976Z,1528895068.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:29.337Z,1528895069.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:29.371Z,1528895069.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:29.728Z,1528895069.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:29.746Z,1528895069.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:30.126Z,1528895070.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:30.144Z,1528895070.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:33.259Z,1528895073.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:33.284Z,1528895073.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:33.423Z,1528895073.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:33.467Z,1528895073.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:33.820Z,1528895073.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:33.845Z,1528895073.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:34.196Z,1528895074.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:34.226Z,1528895074.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:34.595Z,1528895074.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:34.632Z,1528895074.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:34.996Z,1528895074.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:35.038Z,1528895075.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:35.395Z,1528895075.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:35.428Z,1528895075.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:35.812Z,1528895075.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:35.830Z,1528895075.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:36.210Z,1528895076.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:36.235Z,1528895076.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:36.612Z,1528895076.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:36.631Z,1528895076.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:36.995Z,1528895076.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:37.031Z,1528895077.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:37.399Z,1528895077.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:37.429Z,1528895077.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:37.792Z,1528895077.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:37.826Z,1528895077.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:38.195Z,1528895078.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:38.233Z,1528895078.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:38.610Z,1528895078.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:38.652Z,1528895078.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:39.014Z,1528895079.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:39.044Z,1528895079.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:39.407Z,1528895079.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:39.426Z,1528895079.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:39.803Z,1528895079.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:39.821Z,1528895079.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:40.195Z,1528895080.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:40.228Z,1528895080.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:40.610Z,1528895080.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:40.628Z,1528895080.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:41.010Z,1528895081.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:41.040Z,1528895081.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:41.413Z,1528895081.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:41.431Z,1528895081.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:41.796Z,1528895081.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:41.832Z,1528895081.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:42.195Z,1528895082.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:42.238Z,1528895082.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:42.613Z,1528895082.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:42.631Z,1528895082.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:43.016Z,1528895083.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:43.034Z,1528895083.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:43.418Z,1528895083.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:43.436Z,1528895083.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:43.796Z,1528895083.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:43.824Z,1528895083.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:44.212Z,1528895084.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:44.234Z,1528895084.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:44.617Z,1528895084.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:44.640Z,1528895084.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:45.012Z,1528895085.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:45.030Z,1528895085.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:45.412Z,1528895085.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:45.430Z,1528895085.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:45.796Z,1528895085.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:45.829Z,1528895085.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:46.195Z,1528895086.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:46.225Z,1528895086.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:46.613Z,1528895086.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:46.631Z,1528895086.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:47.018Z,1528895087.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:47.036Z,1528895087.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:47.412Z,1528895087.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:47.430Z,1528895087.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:47.794Z,1528895087.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:47.835Z,1528895087.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:48.195Z,1528895088.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:48.235Z,1528895088.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:48.612Z,1528895088.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:48.636Z,1528895088.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:49.016Z,1528895089.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:49.040Z,1528895089.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:49.417Z,1528895089.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:49.435Z,1528895089.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:49.792Z,1528895089.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:49.819Z,1528895089.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:50.195Z,1528895090.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:50.232Z,1528895090.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:50.617Z,1528895090.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:50.635Z,1528895090.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:51.016Z,1528895091.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:51.034Z,1528895091.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:51.410Z,1528895091.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:51.443Z,1528895091.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:51.796Z,1528895091.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:51.829Z,1528895091.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:52.191Z,1528895092.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:52.219Z,1528895092.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:52.606Z,1528895092.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:52.630Z,1528895092.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:53.017Z,1528895093.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:53.040Z,1528895093.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:53.412Z,1528895093.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:53.430Z,1528895093.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:53.796Z,1528895093.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:53.832Z,1528895093.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:54.195Z,1528895094.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:54.237Z,1528895094.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:54.612Z,1528895094.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:54.630Z,1528895094.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:55.016Z,1528895095.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:55.035Z,1528895095.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:55.417Z,1528895095.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:55.435Z,1528895095.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:55.796Z,1528895095.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:55.825Z,1528895095.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:56.195Z,1528895096.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:56.235Z,1528895096.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:56.617Z,1528895096.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:56.635Z,1528895096.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:57.016Z,1528895097.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:57.034Z,1528895097.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:57.412Z,1528895097.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:57.429Z,1528895097.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:57.796Z,1528895097.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:57.832Z,1528895097.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:58.195Z,1528895098.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:58.232Z,1528895098.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:58.610Z,1528895098.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:58.635Z,1528895098.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:59.017Z,1528895099.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:59.035Z,1528895099.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:59.402Z,1528895099.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:59.432Z,1528895099.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:04:59.800Z,1528895099.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:04:59.834Z,1528895099.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:00.196Z,1528895100.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:00.230Z,1528895100.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:00.602Z,1528895100.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:00.636Z,1528895100.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:01.010Z,1528895101.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:01.048Z,1528895101.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:01.407Z,1528895101.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:01.448Z,1528895101.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:01.796Z,1528895101.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:01.815Z,1528895101.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:02.199Z,1528895102.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:02.217Z,1528895102.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:02.611Z,1528895102.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:02.644Z,1528895102.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:03.011Z,1528895103.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:03.043Z,1528895103.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:03.411Z,1528895103.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:03.443Z,1528895103.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:03.799Z,1528895103.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:03.817Z,1528895103.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:04.194Z,1528895104.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:04.212Z,1528895104.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:04.610Z,1528895104.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:04.646Z,1528895104.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:05.009Z,1528895105.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:05.027Z,1528895105.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:05.406Z,1528895105.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:05.424Z,1528895105.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:05.801Z,1528895105.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:05.819Z,1528895105.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:06.198Z,1528895106.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:06.215Z,1528895106.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:06.602Z,1528895106.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:06.624Z,1528895106.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:07.010Z,1528895107.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:07.027Z,1528895107.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:07.406Z,1528895107.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:07.428Z,1528895107.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:07.801Z,1528895107.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:07.819Z,1528895107.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:08.201Z,1528895108.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:08.219Z,1528895108.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:08.610Z,1528895108.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:08.627Z,1528895108.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:09.006Z,1528895109.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:09.024Z,1528895109.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:09.406Z,1528895109.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:09.425Z,1528895109.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:09.802Z,1528895109.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:09.819Z,1528895109.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:10.195Z,1528895110.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:10.228Z,1528895110.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:10.606Z,1528895110.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:10.624Z,1528895110.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:11.007Z,1528895111.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:11.032Z,1528895111.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:11.406Z,1528895111.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:11.424Z,1528895111.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:11.799Z,1528895111.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:11.832Z,1528895111.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:12.203Z,1528895112.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:12.221Z,1528895112.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:12.606Z,1528895112.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:12.624Z,1528895112.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:13.010Z,1528895113.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:13.028Z,1528895113.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:13.406Z,1528895113.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:13.428Z,1528895113.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:13.802Z,1528895113.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:13.819Z,1528895113.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:14.202Z,1528895114.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:14.219Z,1528895114.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:14.607Z,1528895114.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:14.632Z,1528895114.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:15.010Z,1528895115.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:15.028Z,1528895115.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:15.406Z,1528895115.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:15.428Z,1528895115.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:15.802Z,1528895115.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:15.820Z,1528895115.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:16.197Z,1528895116.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:16.215Z,1528895116.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:16.606Z,1528895116.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:16.624Z,1528895116.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:17.007Z,1528895117.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:17.025Z,1528895117.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:17.407Z,1528895117.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:17.425Z,1528895117.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:17.800Z,1528895117.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:17.831Z,1528895117.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:18.202Z,1528895118.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:18.219Z,1528895118.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:18.607Z,1528895118.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:18.632Z,1528895118.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:19.011Z,1528895119.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:19.036Z,1528895119.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:19.410Z,1528895119.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:19.427Z,1528895119.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:19.802Z,1528895119.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:19.820Z,1528895119.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:20.199Z,1528895120.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:20.231Z,1528895120.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:20.602Z,1528895120.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:20.620Z,1528895120.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:21.006Z,1528895121.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:21.025Z,1528895121.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:21.408Z,1528895121.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:21.432Z,1528895121.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:21.810Z,1528895121.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:21.827Z,1528895121.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:22.202Z,1528895122.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:22.224Z,1528895122.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:22.599Z,1528895122.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:22.633Z,1528895122.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:23.003Z,1528895123.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:23.021Z,1528895123.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:23.405Z,1528895123.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:23.423Z,1528895123.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:23.811Z,1528895123.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:23.829Z,1528895123.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:24.211Z,1528895124.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:24.236Z,1528895124.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:24.611Z,1528895124.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:24.628Z,1528895124.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:25.002Z,1528895125.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:25.020Z,1528895125.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:25.402Z,1528895125.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:25.425Z,1528895125.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:25.802Z,1528895125.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:25.828Z,1528895125.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:26.203Z,1528895126.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:26.220Z,1528895126.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:26.602Z,1528895126.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:26.620Z,1528895126.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:27.011Z,1528895127.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:27.029Z,1528895127.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:27.410Z,1528895127.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:27.436Z,1528895127.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:27.811Z,1528895127.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:27.830Z,1528895127.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:28.202Z,1528895128.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:28.219Z,1528895128.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:28.599Z,1528895128.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:28.623Z,1528895128.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:29.003Z,1528895129.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:29.021Z,1528895129.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:29.402Z,1528895129.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:29.419Z,1528895129.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:29.810Z,1528895129.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:29.828Z,1528895129.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:30.211Z,1528895130.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:30.228Z,1528895130.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:33.338Z,1528895133.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:33.372Z,1528895133.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:33.487Z,1528895133.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:33.537Z,1528895133.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:33.897Z,1528895133.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:33.915Z,1528895133.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:34.288Z,1528895134.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:34.315Z,1528895134.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:34.700Z,1528895134.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:34.718Z,1528895134.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:35.105Z,1528895135.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:35.128Z,1528895135.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:35.500Z,1528895135.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:35.518Z,1528895135.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:35.883Z,1528895135.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:35.919Z,1528895135.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:36.283Z,1528895136.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:36.312Z,1528895136.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:36.687Z,1528895136.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:36.715Z,1528895136.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:37.083Z,1528895137.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:37.118Z,1528895137.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:37.483Z,1528895137.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:37.516Z,1528895137.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:37.902Z,1528895137.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:37.920Z,1528895137.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:38.302Z,1528895138.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:38.319Z,1528895138.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:38.704Z,1528895138.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:38.728Z,1528895138.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:39.083Z,1528895139.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:39.115Z,1528895139.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:39.483Z,1528895139.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:39.516Z,1528895139.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:39.884Z,1528895139.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:39.924Z,1528895139.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:40.283Z,1528895140.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:40.332Z,1528895140.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:40.704Z,1528895140.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:40.722Z,1528895140.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:41.103Z,1528895141.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:41.126Z,1528895141.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:41.504Z,1528895141.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:41.522Z,1528895141.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:41.884Z,1528895141.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:41.915Z,1528895141.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:42.283Z,1528895142.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:42.324Z,1528895142.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:42.700Z,1528895142.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:42.719Z,1528895142.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:43.100Z,1528895143.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:43.118Z,1528895143.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:43.504Z,1528895143.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:43.528Z,1528895143.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:43.884Z,1528895143.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:43.915Z,1528895143.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:44.283Z,1528895144.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:44.319Z,1528895144.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:44.705Z,1528895144.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:44.722Z,1528895144.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:45.100Z,1528895145.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:45.118Z,1528895145.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:45.490Z,1528895145.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:45.526Z,1528895145.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:45.884Z,1528895145.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:45.924Z,1528895145.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:46.283Z,1528895146.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:46.315Z,1528895146.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:46.689Z,1528895146.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:46.724Z,1528895146.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:47.103Z,1528895147.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:47.126Z,1528895147.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:47.500Z,1528895147.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:47.518Z,1528895147.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:47.884Z,1528895147.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:47.914Z,1528895147.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:48.285Z,1528895148.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:48.315Z,1528895148.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:48.700Z,1528895148.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:48.718Z,1528895148.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:49.103Z,1528895149.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:49.121Z,1528895149.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:49.505Z,1528895149.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:49.528Z,1528895149.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:49.884Z,1528895149.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:49.914Z,1528895149.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:50.284Z,1528895150.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:50.315Z,1528895150.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:50.705Z,1528895150.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:50.723Z,1528895150.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:51.098Z,1528895151.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:51.121Z,1528895151.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:51.499Z,1528895151.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:51.518Z,1528895151.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:51.879Z,1528895151.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:51.910Z,1528895151.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:52.279Z,1528895152.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:52.296Z,1528895152.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:52.693Z,1528895152.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:52.721Z,1528895152.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:53.109Z,1528895153.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:53.127Z,1528895153.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:53.489Z,1528895153.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:53.528Z,1528895153.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:53.884Z,1528895153.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:53.909Z,1528895153.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:54.279Z,1528895154.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:54.297Z,1528895154.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:54.693Z,1528895154.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:54.727Z,1528895154.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:55.101Z,1528895155.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:55.128Z,1528895155.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:55.501Z,1528895155.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:55.530Z,1528895155.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:55.888Z,1528895155.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:55.906Z,1528895155.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:56.286Z,1528895156.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:56.303Z,1528895156.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:56.697Z,1528895156.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:56.731Z,1528895156.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:57.094Z,1528895157.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:57.112Z,1528895157.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:57.497Z,1528895157.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:57.515Z,1528895157.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:57.888Z,1528895157.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:57.918Z,1528895157.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:58.289Z,1528895158.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:58.306Z,1528895158.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:58.692Z,1528895158.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:58.722Z,1528895158.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:59.097Z,1528895159.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:59.117Z,1528895159.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:59.498Z,1528895159.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:59.520Z,1528895159.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:05:59.889Z,1528895159.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:05:59.907Z,1528895159.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:00.290Z,1528895160.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:00.308Z,1528895160.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:00.699Z,1528895160.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:00.724Z,1528895160.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:01.098Z,1528895161.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:01.120Z,1528895161.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:01.499Z,1528895161.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:01.524Z,1528895161.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:01.886Z,1528895161.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:01.904Z,1528895161.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:02.287Z,1528895162.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:02.309Z,1528895162.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:02.699Z,1528895162.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:02.717Z,1528895162.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:03.098Z,1528895163.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:03.120Z,1528895163.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:03.495Z,1528895163.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:03.513Z,1528895163.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:03.887Z,1528895163.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:03.913Z,1528895163.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:04.289Z,1528895164.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:04.306Z,1528895164.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:04.698Z,1528895164.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:04.716Z,1528895164.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:05.099Z,1528895165.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:05.124Z,1528895165.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:05.495Z,1528895165.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:05.513Z,1528895165.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:05.887Z,1528895165.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:05.910Z,1528895165.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:06.287Z,1528895166.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:06.311Z,1528895166.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:06.699Z,1528895166.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:06.717Z,1528895166.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:07.098Z,1528895167.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:07.120Z,1528895167.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:07.499Z,1528895167.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:07.524Z,1528895167.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:07.889Z,1528895167.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:07.907Z,1528895167.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:08.287Z,1528895168.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:08.310Z,1528895168.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:08.700Z,1528895168.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:08.718Z,1528895168.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:09.099Z,1528895169.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:09.116Z,1528895169.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:09.498Z,1528895169.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:09.516Z,1528895169.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:09.891Z,1528895169.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:09.909Z,1528895169.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:10.285Z,1528895170.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:10.303Z,1528895170.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:10.698Z,1528895170.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:10.724Z,1528895170.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:11.099Z,1528895171.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:11.117Z,1528895171.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:11.496Z,1528895171.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:11.513Z,1528895171.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:11.894Z,1528895171.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:11.912Z,1528895171.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:12.287Z,1528895172.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:12.312Z,1528895172.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:12.699Z,1528895172.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:12.717Z,1528895172.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:13.097Z,1528895173.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:13.115Z,1528895173.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:13.500Z,1528895173.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:13.518Z,1528895173.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:13.882Z,1528895173.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:13.915Z,1528895173.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:14.287Z,1528895174.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:14.312Z,1528895174.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:14.687Z,1528895174.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:14.712Z,1528895174.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:15.097Z,1528895175.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:15.116Z,1528895175.116 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:15.116Z,1528895175.116 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 193
2018-06-13T13:06:15.116Z,1528895175.116 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:06:15.118Z,1528895175.118 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:15.118Z,1528895175.118 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 193
2018-06-13T13:06:15.118Z,1528895175.118 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:06:15.120Z,1528895175.120 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:15.120Z,1528895175.120 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 193
2018-06-13T13:06:15.120Z,1528895175.120 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:06:15.197Z,1528895175.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:06:15.197Z,1528895175.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:06:15.198Z,1528895175.198 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:06:15.511Z,1528895175.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:15.601Z,1528895175.601 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:06:15.601Z,1528895175.601 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 193
2018-06-13T13:06:15.602Z,1528895175.602 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:06:15.602Z,1528895175.602 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 193
2018-06-13T13:06:15.602Z,1528895175.602 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:06:15.602Z,1528895175.602 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 193
2018-06-13T13:06:15.902Z,1528895175.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:15.934Z,1528895175.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:06:15.934Z,1528895175.934 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:06:15.935Z,1528895175.935 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:06:15.935Z,1528895175.935 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:06:15.935Z,1528895175.935 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:06:15.936Z,1528895175.936 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:06:15.936Z,1528895175.936 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:06:15.936Z,1528895175.936 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:06:15.937Z,1528895175.937 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:06:16.283Z,1528895176.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:16.313Z,1528895176.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:06:16.314Z,1528895176.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:16.683Z,1528895176.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:16.700Z,1528895176.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:06:16.701Z,1528895176.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:17.088Z,1528895177.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:17.128Z,1528895177.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:06:17.133Z,1528895177.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:17.486Z,1528895177.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:17.503Z,1528895177.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:06:17.504Z,1528895177.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:17.897Z,1528895177.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:17.931Z,1528895177.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:06:17.932Z,1528895177.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:18.301Z,1528895178.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:18.335Z,1528895178.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:06:18.336Z,1528895178.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:18.694Z,1528895178.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:18.711Z,1528895178.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:06:18.712Z,1528895178.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:19.088Z,1528895179.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:19.106Z,1528895179.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:06:19.107Z,1528895179.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:19.489Z,1528895179.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:19.507Z,1528895179.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:06:19.508Z,1528895179.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:19.887Z,1528895179.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:19.904Z,1528895179.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:06:19.905Z,1528895179.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:20.288Z,1528895180.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:20.306Z,1528895180.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:06:20.307Z,1528895180.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:20.688Z,1528895180.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:20.706Z,1528895180.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:06:20.707Z,1528895180.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:21.089Z,1528895181.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:21.107Z,1528895181.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:06:21.108Z,1528895181.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:21.497Z,1528895181.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:21.514Z,1528895181.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:06:21.515Z,1528895181.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:21.897Z,1528895181.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:21.915Z,1528895181.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:06:21.916Z,1528895181.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:22.288Z,1528895182.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:22.312Z,1528895182.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:06:22.314Z,1528895182.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:22.688Z,1528895182.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:22.705Z,1528895182.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:06:22.706Z,1528895182.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:23.090Z,1528895183.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:23.107Z,1528895183.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:06:23.108Z,1528895183.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:23.489Z,1528895183.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:23.506Z,1528895183.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:06:23.507Z,1528895183.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:23.893Z,1528895183.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:23.911Z,1528895183.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:06:23.912Z,1528895183.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:24.297Z,1528895184.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:24.314Z,1528895184.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:06:24.315Z,1528895184.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:24.695Z,1528895184.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:24.713Z,1528895184.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:06:24.714Z,1528895184.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:25.088Z,1528895185.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:25.116Z,1528895185.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:06:25.121Z,1528895185.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:25.490Z,1528895185.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:25.507Z,1528895185.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:06:25.508Z,1528895185.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:25.883Z,1528895185.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:25.907Z,1528895185.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:06:25.908Z,1528895185.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:26.290Z,1528895186.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:26.307Z,1528895186.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T13:06:26.308Z,1528895186.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:26.687Z,1528895186.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:26.711Z,1528895186.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T13:06:26.712Z,1528895186.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:27.099Z,1528895187.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:27.118Z,1528895187.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T13:06:27.118Z,1528895187.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:27.498Z,1528895187.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:27.520Z,1528895187.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T13:06:27.521Z,1528895187.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:27.900Z,1528895187.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:27.924Z,1528895187.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T13:06:27.925Z,1528895187.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:28.290Z,1528895188.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:28.312Z,1528895188.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T13:06:28.313Z,1528895188.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:28.687Z,1528895188.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:28.712Z,1528895188.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T13:06:28.717Z,1528895188.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:29.084Z,1528895189.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:29.126Z,1528895189.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T13:06:29.127Z,1528895189.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:29.483Z,1528895189.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:29.520Z,1528895189.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T13:06:29.525Z,1528895189.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:29.905Z,1528895189.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:29.923Z,1528895189.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T13:06:29.923Z,1528895189.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:30.309Z,1528895190.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:30.327Z,1528895190.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T13:06:30.328Z,1528895190.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:33.415Z,1528895193.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:33.432Z,1528895193.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T13:06:33.433Z,1528895193.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:33.437Z,1528895193.437 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T13:01:33.1Z
2018-06-13T13:06:33.437Z,1528895193.437 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T13:06:33.437Z,1528895193.437 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T13:06:33.544Z,1528895193.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:33.592Z,1528895193.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T13:06:33.593Z,1528895193.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:34.684Z,1528895194.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:34.719Z,1528895194.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T13:06:34.720Z,1528895194.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:34.835Z,1528895194.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:34.880Z,1528895194.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T13:06:34.880Z,1528895194.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:35.241Z,1528895195.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:35.268Z,1528895195.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:35.656Z,1528895195.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:35.682Z,1528895195.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:36.046Z,1528895196.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:36.078Z,1528895196.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:36.432Z,1528895196.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:36.466Z,1528895196.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:36.835Z,1528895196.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:36.879Z,1528895196.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:37.236Z,1528895197.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:37.269Z,1528895197.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:37.635Z,1528895197.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:37.652Z,1528895197.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:38.054Z,1528895198.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:38.086Z,1528895198.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:38.450Z,1528895198.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:38.478Z,1528895198.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:38.845Z,1528895198.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:38.897Z,1528895198.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:39.239Z,1528895199.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:39.257Z,1528895199.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:42.347Z,1528895202.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:42.381Z,1528895202.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:42.484Z,1528895202.484 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0224.lzma
2018-06-13T13:06:42.514Z,1528895202.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:42.539Z,1528895202.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:42.909Z,1528895202.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:42.937Z,1528895202.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:43.275Z,1528895203.275 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0224.lzma.bak
2018-06-13T13:06:43.275Z,1528895203.275 [DataOverHttps](INFO): SBD MOMSN=8329270
2018-06-13T13:06:43.328Z,1528895203.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:43.346Z,1528895203.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:45.193Z,1528895205.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:45.216Z,1528895205.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:45.350Z,1528895205.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:45.368Z,1528895205.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:48.501Z,1528895208.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:48.519Z,1528895208.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:48.659Z,1528895208.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:48.699Z,1528895208.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:49.084Z,1528895209.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:49.102Z,1528895209.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:49.478Z,1528895209.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:49.508Z,1528895209.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:49.874Z,1528895209.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:49.900Z,1528895209.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:50.260Z,1528895210.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:50.294Z,1528895210.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:50.667Z,1528895210.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:50.685Z,1528895210.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:51.068Z,1528895211.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:51.086Z,1528895211.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:51.471Z,1528895211.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:51.560Z,1528895211.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:51.878Z,1528895211.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:51.903Z,1528895211.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:52.274Z,1528895212.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:52.303Z,1528895212.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:52.682Z,1528895212.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:52.844Z,1528895212.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:53.060Z,1528895213.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:53.125Z,1528895213.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:53.479Z,1528895213.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:53.548Z,1528895213.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:56.660Z,1528895216.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:56.696Z,1528895216.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:56.785Z,1528895216.785 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0225.lzma
2018-06-13T13:06:56.811Z,1528895216.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:56.860Z,1528895216.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:57.227Z,1528895217.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:57.245Z,1528895217.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:57.586Z,1528895217.586 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0225.lzma.bak
2018-06-13T13:06:57.586Z,1528895217.586 [DataOverHttps](INFO): SBD MOMSN=8329272
2018-06-13T13:06:57.640Z,1528895217.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:57.657Z,1528895217.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:59.533Z,1528895219.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:59.555Z,1528895219.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:06:59.558Z,1528895219.558 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T13:06:59.558Z,1528895219.558 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T13:06:59.558Z,1528895219.558 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T13:06:59.688Z,1528895219.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:06:59.732Z,1528895219.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:00.086Z,1528895220.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:00.109Z,1528895220.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:00.484Z,1528895220.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:00.506Z,1528895220.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:00.893Z,1528895220.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:00.912Z,1528895220.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:04.002Z,1528895224.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:04.036Z,1528895224.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:04.185Z,1528895224.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:04.209Z,1528895224.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:04.567Z,1528895224.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:04.603Z,1528895224.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:04.968Z,1528895224.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:04.995Z,1528895224.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:05.359Z,1528895225.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:05.400Z,1528895225.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:05.779Z,1528895225.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:05.798Z,1528895225.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:06.179Z,1528895226.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:06.198Z,1528895226.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:06.574Z,1528895226.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:06.598Z,1528895226.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:06.965Z,1528895226.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:06.999Z,1528895226.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:07.363Z,1528895227.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:07.396Z,1528895227.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:07.770Z,1528895227.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:07.804Z,1528895227.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:08.183Z,1528895228.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:08.202Z,1528895228.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:08.580Z,1528895228.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:08.604Z,1528895228.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:08.963Z,1528895228.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:08.996Z,1528895228.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:09.364Z,1528895229.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:09.395Z,1528895229.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:09.759Z,1528895229.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:09.799Z,1528895229.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:10.170Z,1528895230.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:10.204Z,1528895230.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:10.584Z,1528895230.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:10.619Z,1528895230.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:10.980Z,1528895230.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:11.004Z,1528895231.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:11.359Z,1528895231.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:11.400Z,1528895231.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:11.764Z,1528895231.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:11.800Z,1528895231.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:12.168Z,1528895232.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:12.196Z,1528895232.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:12.563Z,1528895232.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:12.601Z,1528895232.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:12.978Z,1528895232.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:13.014Z,1528895233.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:13.373Z,1528895233.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:13.409Z,1528895233.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:13.778Z,1528895233.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:13.806Z,1528895233.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:14.167Z,1528895234.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:14.184Z,1528895234.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:14.567Z,1528895234.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:14.584Z,1528895234.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:14.967Z,1528895234.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:14.985Z,1528895234.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:15.370Z,1528895235.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:15.388Z,1528895235.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:15.771Z,1528895235.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:15.789Z,1528895235.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:16.177Z,1528895236.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:16.219Z,1528895236.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:16.581Z,1528895236.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:16.615Z,1528895236.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:16.977Z,1528895236.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:16.995Z,1528895236.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:17.370Z,1528895237.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:17.388Z,1528895237.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:17.768Z,1528895237.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:17.786Z,1528895237.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:18.170Z,1528895238.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:18.187Z,1528895238.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:18.575Z,1528895238.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:18.600Z,1528895238.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:18.977Z,1528895238.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:19.003Z,1528895239.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:19.381Z,1528895239.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:19.399Z,1528895239.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:19.776Z,1528895239.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:19.793Z,1528895239.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:20.172Z,1528895240.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:20.209Z,1528895240.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:20.575Z,1528895240.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:20.593Z,1528895240.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:20.974Z,1528895240.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:20.996Z,1528895240.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:21.367Z,1528895241.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:21.394Z,1528895241.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:21.769Z,1528895241.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:21.796Z,1528895241.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:22.178Z,1528895242.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:22.226Z,1528895242.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:22.582Z,1528895242.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:22.605Z,1528895242.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:22.982Z,1528895242.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:23.005Z,1528895243.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:23.372Z,1528895243.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:23.390Z,1528895243.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:23.772Z,1528895243.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:23.790Z,1528895243.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:24.174Z,1528895244.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:24.196Z,1528895244.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:24.569Z,1528895244.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:24.587Z,1528895244.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:24.975Z,1528895244.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:25.008Z,1528895245.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:25.381Z,1528895245.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:25.399Z,1528895245.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:25.782Z,1528895245.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:25.801Z,1528895245.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:26.173Z,1528895246.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:26.196Z,1528895246.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:26.562Z,1528895246.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:26.593Z,1528895246.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:26.961Z,1528895246.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:26.979Z,1528895246.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:27.382Z,1528895247.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:27.541Z,1528895247.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:27.784Z,1528895247.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:27.903Z,1528895247.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:28.185Z,1528895248.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:28.233Z,1528895248.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:28.580Z,1528895248.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:28.607Z,1528895248.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:28.980Z,1528895248.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:28.998Z,1528895248.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:29.367Z,1528895249.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:29.394Z,1528895249.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:29.763Z,1528895249.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:29.804Z,1528895249.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:30.167Z,1528895250.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:30.206Z,1528895250.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:30.567Z,1528895250.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:30.599Z,1528895250.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:30.950Z,1528895250.950 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T13:07:30.951Z,1528895250.951 [NAL9602] Data Fault, FailCount= 3
2018-06-13T13:07:30.951Z,1528895250.951 [NAL9602](ERROR): Data Fault
2018-06-13T13:07:30.968Z,1528895250.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:31.018Z,1528895251.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:31.093Z,1528895251.093 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T13:07:31.342Z,1528895251.342 [NAL9602](INFO): Powering down
2018-06-13T13:07:31.359Z,1528895251.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:31.412Z,1528895251.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:31.764Z,1528895251.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:31.795Z,1528895251.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:32.165Z,1528895252.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:32.206Z,1528895252.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:32.281Z,1528895252.281 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T13:07:32.281Z,1528895252.281 [NAL9602] No Fault, FailCount= 3
2018-06-13T13:07:32.566Z,1528895252.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:32.600Z,1528895252.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:32.963Z,1528895252.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:33.004Z,1528895253.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:33.364Z,1528895253.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:33.395Z,1528895253.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:33.765Z,1528895253.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:33.801Z,1528895253.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:34.165Z,1528895254.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:34.200Z,1528895254.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:34.566Z,1528895254.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:34.604Z,1528895254.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:34.960Z,1528895254.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:35.002Z,1528895255.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:35.366Z,1528895255.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:35.405Z,1528895255.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:35.766Z,1528895255.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:35.783Z,1528895255.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:36.167Z,1528895256.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:36.210Z,1528895256.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:36.570Z,1528895256.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:36.619Z,1528895256.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:36.970Z,1528895256.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:37.008Z,1528895257.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:37.370Z,1528895257.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:37.388Z,1528895257.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:37.762Z,1528895257.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:37.812Z,1528895257.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:38.166Z,1528895258.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:38.189Z,1528895258.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:38.566Z,1528895258.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:38.584Z,1528895258.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:38.968Z,1528895258.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:38.987Z,1528895258.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:39.366Z,1528895259.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:39.416Z,1528895259.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:39.771Z,1528895259.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:39.792Z,1528895259.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:40.166Z,1528895260.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:40.185Z,1528895260.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:40.570Z,1528895260.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:40.611Z,1528895260.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:40.964Z,1528895260.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:40.996Z,1528895260.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:41.368Z,1528895261.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:41.391Z,1528895261.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:41.773Z,1528895261.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:41.795Z,1528895261.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:42.169Z,1528895262.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:42.186Z,1528895262.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:42.565Z,1528895262.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:42.617Z,1528895262.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:42.969Z,1528895262.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:42.991Z,1528895262.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:43.365Z,1528895263.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:43.387Z,1528895263.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:43.769Z,1528895263.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:43.788Z,1528895263.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:44.167Z,1528895264.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:44.214Z,1528895264.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:44.565Z,1528895264.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:44.588Z,1528895264.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:44.964Z,1528895264.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:44.987Z,1528895264.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:45.370Z,1528895265.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:45.392Z,1528895265.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:45.764Z,1528895265.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:45.800Z,1528895265.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:46.164Z,1528895266.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:46.186Z,1528895266.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:46.567Z,1528895266.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:46.595Z,1528895266.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:46.966Z,1528895266.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:46.985Z,1528895266.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:47.364Z,1528895267.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:47.417Z,1528895267.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:47.768Z,1528895267.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:47.792Z,1528895267.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:48.165Z,1528895268.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:48.187Z,1528895268.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:48.567Z,1528895268.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:48.587Z,1528895268.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:48.969Z,1528895268.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:49.016Z,1528895269.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:49.369Z,1528895269.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:49.390Z,1528895269.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:49.764Z,1528895269.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:49.788Z,1528895269.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:50.169Z,1528895270.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:50.194Z,1528895270.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:50.564Z,1528895270.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:50.593Z,1528895270.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:50.964Z,1528895270.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:50.982Z,1528895270.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:51.367Z,1528895271.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:51.398Z,1528895271.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:51.764Z,1528895271.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:51.792Z,1528895271.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:52.164Z,1528895272.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:52.182Z,1528895272.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:52.562Z,1528895272.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:52.610Z,1528895272.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:52.968Z,1528895272.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:52.991Z,1528895272.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:53.365Z,1528895273.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:53.388Z,1528895273.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:53.767Z,1528895273.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:53.789Z,1528895273.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:54.165Z,1528895274.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:54.182Z,1528895274.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:54.568Z,1528895274.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:54.591Z,1528895274.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:54.967Z,1528895274.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:54.994Z,1528895274.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:55.364Z,1528895275.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:55.383Z,1528895275.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:55.765Z,1528895275.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:55.783Z,1528895275.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:56.167Z,1528895276.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:56.204Z,1528895276.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:56.564Z,1528895276.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:56.587Z,1528895276.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:56.965Z,1528895276.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:56.983Z,1528895276.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:57.369Z,1528895277.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:57.387Z,1528895277.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:57.765Z,1528895277.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:57.783Z,1528895277.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:58.166Z,1528895278.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:58.189Z,1528895278.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:58.569Z,1528895278.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:58.587Z,1528895278.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:58.965Z,1528895278.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:58.983Z,1528895278.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:59.369Z,1528895279.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:59.387Z,1528895279.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:07:59.774Z,1528895279.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:07:59.796Z,1528895279.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:00.170Z,1528895280.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:00.187Z,1528895280.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:00.558Z,1528895280.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:00.596Z,1528895280.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:00.962Z,1528895280.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:01.008Z,1528895281.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:01.346Z,1528895281.346 [NAL9602](INFO): Powering up NAL9602
2018-06-13T13:08:01.363Z,1528895281.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:01.402Z,1528895281.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:01.762Z,1528895281.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:01.801Z,1528895281.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:02.162Z,1528895282.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:02.201Z,1528895282.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:02.562Z,1528895282.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:02.591Z,1528895282.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:02.963Z,1528895282.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:03.010Z,1528895283.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:06.084Z,1528895286.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:06.102Z,1528895286.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:06.207Z,1528895286.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:06.242Z,1528895286.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:06.611Z,1528895286.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:06.649Z,1528895286.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:07.012Z,1528895287.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:07.045Z,1528895287.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:07.404Z,1528895287.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:07.434Z,1528895287.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:07.809Z,1528895287.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:07.844Z,1528895287.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:08.207Z,1528895288.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:08.263Z,1528895288.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:08.603Z,1528895288.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:08.626Z,1528895288.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:09.010Z,1528895289.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:09.030Z,1528895289.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:09.413Z,1528895289.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:09.431Z,1528895289.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:09.810Z,1528895289.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:09.853Z,1528895289.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:10.211Z,1528895290.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:10.233Z,1528895290.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:10.611Z,1528895290.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:10.632Z,1528895290.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:11.014Z,1528895291.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:11.032Z,1528895291.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:11.414Z,1528895291.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:11.459Z,1528895291.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:11.823Z,1528895291.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:11.859Z,1528895291.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:12.193Z,1528895292.193 [NAL9602](INFO): NAL9602 initialized
2018-06-13T13:08:12.215Z,1528895292.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:12.236Z,1528895292.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:12.613Z,1528895292.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:12.631Z,1528895292.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:13.022Z,1528895293.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:13.068Z,1528895293.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:13.422Z,1528895293.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:13.463Z,1528895293.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.395520 seconds old.
2018-06-13T13:08:13.464Z,1528895293.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:13.465Z,1528895293.465 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.396137 seconds old.
2018-06-13T13:08:13.466Z,1528895293.466 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.396543 seconds old.
2018-06-13T13:08:13.820Z,1528895293.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:13.837Z,1528895293.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.769822 seconds old.
2018-06-13T13:08:13.838Z,1528895293.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:13.839Z,1528895293.839 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.769951 seconds old.
2018-06-13T13:08:13.840Z,1528895293.840 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.770294 seconds old.
2018-06-13T13:08:14.217Z,1528895294.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:14.239Z,1528895294.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.171044 seconds old.
2018-06-13T13:08:14.240Z,1528895294.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:14.240Z,1528895294.240 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.171145 seconds old.
2018-06-13T13:08:14.242Z,1528895294.242 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.171702 seconds old.
2018-06-13T13:08:14.607Z,1528895294.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:14.655Z,1528895294.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.587430 seconds old.
2018-06-13T13:08:14.656Z,1528895294.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:14.657Z,1528895294.657 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.587543 seconds old.
2018-06-13T13:08:14.658Z,1528895294.658 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.588120 seconds old.
2018-06-13T13:08:15.017Z,1528895295.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:15.041Z,1528895295.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:15.424Z,1528895295.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:15.442Z,1528895295.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:15.821Z,1528895295.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:15.859Z,1528895295.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:16.211Z,1528895296.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:16.260Z,1528895296.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:16.617Z,1528895296.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:16.640Z,1528895296.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:17.019Z,1528895297.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:17.045Z,1528895297.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:17.423Z,1528895297.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:17.440Z,1528895297.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:17.821Z,1528895297.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:17.865Z,1528895297.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:18.213Z,1528895298.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:18.252Z,1528895298.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:18.612Z,1528895298.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:18.652Z,1528895298.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:19.030Z,1528895299.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:19.048Z,1528895299.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:19.424Z,1528895299.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:19.474Z,1528895299.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:19.818Z,1528895299.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:19.863Z,1528895299.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:20.204Z,1528895300.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:20.239Z,1528895300.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:20.604Z,1528895300.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:20.652Z,1528895300.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:21.024Z,1528895301.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:21.060Z,1528895301.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:21.431Z,1528895301.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:21.454Z,1528895301.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:21.824Z,1528895301.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:21.848Z,1528895301.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:22.217Z,1528895302.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:22.238Z,1528895302.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:22.608Z,1528895302.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:22.646Z,1528895302.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:23.024Z,1528895303.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:23.051Z,1528895303.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:23.428Z,1528895303.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:23.450Z,1528895303.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:23.829Z,1528895303.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:23.847Z,1528895303.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:24.204Z,1528895304.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:24.257Z,1528895304.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:24.607Z,1528895304.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:24.643Z,1528895304.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:25.028Z,1528895305.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:25.050Z,1528895305.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:25.426Z,1528895305.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:25.446Z,1528895305.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:25.823Z,1528895305.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:25.877Z,1528895305.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:26.208Z,1528895306.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:26.235Z,1528895306.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:26.607Z,1528895306.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:26.651Z,1528895306.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:27.025Z,1528895307.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:27.046Z,1528895307.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:27.429Z,1528895307.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:27.479Z,1528895307.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:27.824Z,1528895307.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:27.853Z,1528895307.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:28.218Z,1528895308.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:28.239Z,1528895308.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:28.603Z,1528895308.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:28.638Z,1528895308.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:29.018Z,1528895309.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:29.050Z,1528895309.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:29.428Z,1528895309.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:29.447Z,1528895309.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:29.828Z,1528895309.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:29.851Z,1528895309.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:30.216Z,1528895310.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:30.240Z,1528895310.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:30.607Z,1528895310.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:30.643Z,1528895310.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:31.024Z,1528895311.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:31.041Z,1528895311.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:31.427Z,1528895311.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:31.451Z,1528895311.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:31.824Z,1528895311.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:31.847Z,1528895311.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:32.217Z,1528895312.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:32.234Z,1528895312.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:32.603Z,1528895312.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:32.631Z,1528895312.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:33.024Z,1528895313.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:33.053Z,1528895313.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:33.423Z,1528895313.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:33.466Z,1528895313.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:33.825Z,1528895313.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:33.842Z,1528895313.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:34.208Z,1528895314.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:34.241Z,1528895314.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:34.608Z,1528895314.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:34.636Z,1528895314.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:35.007Z,1528895315.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:35.036Z,1528895315.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:35.424Z,1528895315.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:35.448Z,1528895315.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:35.824Z,1528895315.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:35.841Z,1528895315.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:36.224Z,1528895316.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:36.242Z,1528895316.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:36.607Z,1528895316.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:36.635Z,1528895316.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:37.007Z,1528895317.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:37.036Z,1528895317.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:37.408Z,1528895317.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:37.436Z,1528895317.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:37.807Z,1528895317.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:37.834Z,1528895317.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:38.225Z,1528895318.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:38.249Z,1528895318.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:38.628Z,1528895318.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:38.652Z,1528895318.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:39.024Z,1528895319.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:39.042Z,1528895319.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:39.404Z,1528895319.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:39.441Z,1528895319.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:39.808Z,1528895319.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:39.840Z,1528895319.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:40.208Z,1528895320.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:40.235Z,1528895320.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:40.608Z,1528895320.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:40.637Z,1528895320.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:41.007Z,1528895321.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:41.037Z,1528895321.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:41.424Z,1528895321.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:41.442Z,1528895321.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:41.825Z,1528895321.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:41.843Z,1528895321.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:42.228Z,1528895322.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:42.246Z,1528895322.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:42.604Z,1528895322.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:42.634Z,1528895322.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:43.008Z,1528895323.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:43.057Z,1528895323.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:43.409Z,1528895323.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:43.427Z,1528895323.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:43.809Z,1528895323.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:43.826Z,1528895323.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:44.222Z,1528895324.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:44.261Z,1528895324.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:44.622Z,1528895324.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:44.665Z,1528895324.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:45.022Z,1528895325.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:45.040Z,1528895325.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:45.409Z,1528895325.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:45.427Z,1528895325.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:45.814Z,1528895325.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:45.832Z,1528895325.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:46.214Z,1528895326.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:46.232Z,1528895326.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:46.612Z,1528895326.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:46.638Z,1528895326.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:47.014Z,1528895327.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:47.036Z,1528895327.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:47.422Z,1528895327.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:47.440Z,1528895327.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:47.824Z,1528895327.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:47.848Z,1528895327.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:48.223Z,1528895328.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:48.241Z,1528895328.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:48.611Z,1528895328.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:48.635Z,1528895328.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:49.015Z,1528895329.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:49.032Z,1528895329.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:49.414Z,1528895329.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:49.432Z,1528895329.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:49.811Z,1528895329.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:49.834Z,1528895329.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:50.223Z,1528895330.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:50.248Z,1528895330.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:50.623Z,1528895330.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:50.640Z,1528895330.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:51.023Z,1528895331.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:51.041Z,1528895331.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:51.419Z,1528895331.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:51.436Z,1528895331.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:51.814Z,1528895331.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:51.836Z,1528895331.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:52.211Z,1528895332.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:52.236Z,1528895332.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:52.616Z,1528895332.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:52.645Z,1528895332.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:53.007Z,1528895333.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:53.047Z,1528895333.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:53.424Z,1528895333.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:53.442Z,1528895333.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:53.829Z,1528895333.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:53.847Z,1528895333.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:54.220Z,1528895334.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:54.247Z,1528895334.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:54.608Z,1528895334.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:54.639Z,1528895334.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:55.018Z,1528895335.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:55.035Z,1528895335.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:55.420Z,1528895335.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:55.438Z,1528895335.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:55.808Z,1528895335.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:55.835Z,1528895335.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:56.229Z,1528895336.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:56.252Z,1528895336.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:56.625Z,1528895336.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:56.643Z,1528895336.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:57.025Z,1528895337.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:57.042Z,1528895337.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:57.408Z,1528895337.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:57.444Z,1528895337.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:57.807Z,1528895337.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:57.840Z,1528895337.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:58.207Z,1528895338.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:58.248Z,1528895338.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:58.605Z,1528895338.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:58.649Z,1528895338.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:59.004Z,1528895339.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:59.031Z,1528895339.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:59.424Z,1528895339.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:59.451Z,1528895339.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:08:59.831Z,1528895339.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:08:59.856Z,1528895339.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:00.225Z,1528895340.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:00.243Z,1528895340.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:03.331Z,1528895343.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:03.348Z,1528895343.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:03.490Z,1528895343.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:03.520Z,1528895343.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:03.909Z,1528895343.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:03.944Z,1528895343.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:04.310Z,1528895344.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:04.344Z,1528895344.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:04.708Z,1528895344.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:04.738Z,1528895344.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:05.098Z,1528895345.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:05.141Z,1528895345.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:05.500Z,1528895345.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:05.518Z,1528895345.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:05.892Z,1528895345.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:05.942Z,1528895345.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:06.308Z,1528895346.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:06.344Z,1528895346.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:06.708Z,1528895346.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:06.726Z,1528895346.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:07.107Z,1528895347.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:07.125Z,1528895347.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:07.495Z,1528895347.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:07.546Z,1528895347.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:07.898Z,1528895347.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:07.921Z,1528895347.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:08.299Z,1528895348.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:08.320Z,1528895348.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:08.697Z,1528895348.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:08.721Z,1528895348.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:09.105Z,1528895349.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:09.149Z,1528895349.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:09.505Z,1528895349.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:09.528Z,1528895349.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:09.908Z,1528895349.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:09.926Z,1528895349.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:10.302Z,1528895350.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:10.332Z,1528895350.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:10.693Z,1528895350.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:10.732Z,1528895350.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:11.111Z,1528895351.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:11.133Z,1528895351.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:11.514Z,1528895351.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:11.532Z,1528895351.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:11.914Z,1528895351.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:11.931Z,1528895351.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:12.295Z,1528895352.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:12.350Z,1528895352.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:12.695Z,1528895352.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:12.728Z,1528895352.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:13.105Z,1528895353.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:13.126Z,1528895353.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:13.510Z,1528895353.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:13.542Z,1528895353.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:13.912Z,1528895353.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:13.948Z,1528895353.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:14.292Z,1528895354.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:14.333Z,1528895354.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:14.691Z,1528895354.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:14.724Z,1528895354.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:15.108Z,1528895355.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:15.136Z,1528895355.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:15.501Z,1528895355.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:15.544Z,1528895355.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:15.905Z,1528895355.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:15.938Z,1528895355.938 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:15.939Z,1528895355.939 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 194
2018-06-13T13:09:15.939Z,1528895355.939 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:09:15.940Z,1528895355.940 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:15.940Z,1528895355.940 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 194
2018-06-13T13:09:15.941Z,1528895355.941 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:09:15.942Z,1528895355.942 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:15.943Z,1528895355.943 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 194
2018-06-13T13:09:15.943Z,1528895355.943 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:09:16.017Z,1528895356.017 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:09:16.018Z,1528895356.018 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:09:16.018Z,1528895356.018 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:09:16.288Z,1528895356.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:16.401Z,1528895356.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:09:16.401Z,1528895356.401 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 194
2018-06-13T13:09:16.402Z,1528895356.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:09:16.402Z,1528895356.402 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 194
2018-06-13T13:09:16.402Z,1528895356.402 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:09:16.402Z,1528895356.402 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 194
2018-06-13T13:09:16.687Z,1528895356.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:16.709Z,1528895356.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:09:16.710Z,1528895356.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:09:16.710Z,1528895356.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:09:16.710Z,1528895356.710 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:09:16.711Z,1528895356.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:09:16.711Z,1528895356.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:09:16.711Z,1528895356.711 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:09:16.712Z,1528895356.712 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:09:16.712Z,1528895356.712 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:09:17.106Z,1528895357.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:17.146Z,1528895357.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:09:17.147Z,1528895357.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:17.505Z,1528895357.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:17.543Z,1528895357.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:09:17.544Z,1528895357.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:17.905Z,1528895357.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:17.944Z,1528895357.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:09:17.944Z,1528895357.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:18.298Z,1528895358.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:18.320Z,1528895358.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:09:18.321Z,1528895358.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:18.697Z,1528895358.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:18.715Z,1528895358.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:09:18.716Z,1528895358.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:19.102Z,1528895359.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:19.121Z,1528895359.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:09:19.122Z,1528895359.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:19.505Z,1528895359.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:19.527Z,1528895359.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:09:19.528Z,1528895359.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:19.907Z,1528895359.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:19.928Z,1528895359.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:09:19.929Z,1528895359.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:20.298Z,1528895360.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:20.332Z,1528895360.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:09:20.349Z,1528895360.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:20.695Z,1528895360.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:20.717Z,1528895360.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:09:20.718Z,1528895360.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:21.107Z,1528895361.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:21.130Z,1528895361.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:09:21.131Z,1528895361.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:21.506Z,1528895361.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:21.528Z,1528895361.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:09:21.529Z,1528895361.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:21.906Z,1528895361.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:21.956Z,1528895361.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:09:21.961Z,1528895361.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:22.296Z,1528895362.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:22.322Z,1528895362.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:09:22.323Z,1528895362.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:22.687Z,1528895362.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:22.728Z,1528895362.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:09:22.729Z,1528895362.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:23.107Z,1528895363.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:23.129Z,1528895363.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:09:23.130Z,1528895363.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:23.511Z,1528895363.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:23.529Z,1528895363.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:09:23.530Z,1528895363.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:23.908Z,1528895363.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:23.934Z,1528895363.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:09:23.936Z,1528895363.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:24.301Z,1528895364.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:24.319Z,1528895364.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:09:24.320Z,1528895364.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:24.691Z,1528895364.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:24.732Z,1528895364.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:09:24.737Z,1528895364.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:25.103Z,1528895365.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:25.121Z,1528895365.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:09:25.122Z,1528895365.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:25.507Z,1528895365.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:25.524Z,1528895365.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:09:25.525Z,1528895365.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:25.912Z,1528895365.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:25.938Z,1528895365.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:09:25.939Z,1528895365.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:26.292Z,1528895366.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:26.324Z,1528895366.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:09:26.324Z,1528895366.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:26.692Z,1528895366.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:26.724Z,1528895366.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:09:26.725Z,1528895366.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:27.111Z,1528895367.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:27.128Z,1528895367.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T13:09:27.130Z,1528895367.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:27.506Z,1528895367.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:27.523Z,1528895367.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T13:09:27.524Z,1528895367.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:27.908Z,1528895367.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:27.930Z,1528895367.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T13:09:27.931Z,1528895367.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:28.291Z,1528895368.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:28.321Z,1528895368.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T13:09:28.322Z,1528895368.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:28.691Z,1528895368.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:28.728Z,1528895368.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T13:09:28.729Z,1528895368.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:29.095Z,1528895369.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:29.122Z,1528895369.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T13:09:29.122Z,1528895369.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:29.513Z,1528895369.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:29.535Z,1528895369.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T13:09:29.536Z,1528895369.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:29.908Z,1528895369.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:29.926Z,1528895369.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T13:09:29.927Z,1528895369.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:30.297Z,1528895370.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:30.333Z,1528895370.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T13:09:30.334Z,1528895370.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:30.692Z,1528895370.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:30.722Z,1528895370.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T13:09:30.723Z,1528895370.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:31.092Z,1528895371.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:31.126Z,1528895371.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T13:09:31.127Z,1528895371.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:31.496Z,1528895371.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:31.535Z,1528895371.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T13:09:31.536Z,1528895371.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:31.891Z,1528895371.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:31.910Z,1528895371.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T13:09:31.911Z,1528895371.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:32.310Z,1528895372.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:32.342Z,1528895372.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T13:09:32.343Z,1528895372.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:32.710Z,1528895372.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:32.742Z,1528895372.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T13:09:32.743Z,1528895372.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:33.106Z,1528895373.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:33.143Z,1528895373.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T13:09:33.144Z,1528895373.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:33.495Z,1528895373.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:33.512Z,1528895373.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T13:09:33.514Z,1528895373.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:33.896Z,1528895373.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:33.914Z,1528895373.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T13:09:33.915Z,1528895373.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:34.298Z,1528895374.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:34.316Z,1528895374.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T13:09:34.316Z,1528895374.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:34.693Z,1528895374.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:34.711Z,1528895374.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T13:09:34.712Z,1528895374.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:35.096Z,1528895375.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:35.114Z,1528895375.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T13:09:35.114Z,1528895375.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:35.506Z,1528895375.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:35.524Z,1528895375.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T13:09:35.525Z,1528895375.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:35.905Z,1528895375.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:35.923Z,1528895375.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T13:09:35.924Z,1528895375.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:36.302Z,1528895376.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:36.324Z,1528895376.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:36.698Z,1528895376.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:36.716Z,1528895376.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:37.091Z,1528895377.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:37.114Z,1528895377.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:37.498Z,1528895377.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:37.516Z,1528895377.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:37.895Z,1528895377.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:37.919Z,1528895377.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:38.305Z,1528895378.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:38.323Z,1528895378.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:38.710Z,1528895378.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:38.727Z,1528895378.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:39.110Z,1528895379.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:39.128Z,1528895379.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:39.487Z,1528895379.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:39.523Z,1528895379.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:39.898Z,1528895379.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:39.916Z,1528895379.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:40.298Z,1528895380.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:40.322Z,1528895380.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:40.688Z,1528895380.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:40.720Z,1528895380.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:41.098Z,1528895381.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:41.119Z,1528895381.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:41.510Z,1528895381.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:41.532Z,1528895381.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:41.908Z,1528895381.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:41.932Z,1528895381.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:42.316Z,1528895382.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:42.334Z,1528895382.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:42.688Z,1528895382.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:42.723Z,1528895382.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:43.087Z,1528895383.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:43.124Z,1528895383.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:43.492Z,1528895383.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:43.523Z,1528895383.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:43.888Z,1528895383.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:43.916Z,1528895383.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:44.308Z,1528895384.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:44.327Z,1528895384.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:44.713Z,1528895384.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:44.731Z,1528895384.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:45.106Z,1528895385.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:45.131Z,1528895385.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:45.487Z,1528895385.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:45.524Z,1528895385.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:45.891Z,1528895385.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:45.921Z,1528895385.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:46.291Z,1528895386.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:46.308Z,1528895386.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:46.687Z,1528895386.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:46.712Z,1528895386.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:47.096Z,1528895387.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:47.113Z,1528895387.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:47.505Z,1528895387.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:47.539Z,1528895387.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:47.901Z,1528895387.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:47.919Z,1528895387.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:48.309Z,1528895388.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:48.343Z,1528895388.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:48.696Z,1528895388.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:48.714Z,1528895388.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:49.091Z,1528895389.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:49.115Z,1528895389.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:49.498Z,1528895389.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:49.515Z,1528895389.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:49.898Z,1528895389.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:49.915Z,1528895389.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:50.302Z,1528895390.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:50.319Z,1528895390.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:50.705Z,1528895390.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:50.723Z,1528895390.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:51.105Z,1528895391.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:51.128Z,1528895391.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:51.497Z,1528895391.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:51.515Z,1528895391.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:51.898Z,1528895391.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:51.915Z,1528895391.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:52.294Z,1528895392.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:52.311Z,1528895392.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:52.690Z,1528895392.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:52.716Z,1528895392.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:53.095Z,1528895393.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:53.117Z,1528895393.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:53.506Z,1528895393.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:53.528Z,1528895393.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:53.907Z,1528895393.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:53.932Z,1528895393.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:54.306Z,1528895394.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:54.324Z,1528895394.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:54.694Z,1528895394.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:54.712Z,1528895394.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:55.091Z,1528895395.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:55.114Z,1528895395.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:55.495Z,1528895395.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:55.518Z,1528895395.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:55.897Z,1528895395.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:55.915Z,1528895395.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:56.303Z,1528895396.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:56.320Z,1528895396.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:56.706Z,1528895396.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:56.728Z,1528895396.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:57.106Z,1528895397.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:57.124Z,1528895397.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:57.497Z,1528895397.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:57.515Z,1528895397.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:57.897Z,1528895397.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:57.914Z,1528895397.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:58.297Z,1528895398.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:58.315Z,1528895398.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:58.699Z,1528895398.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:58.716Z,1528895398.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:59.086Z,1528895399.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:59.119Z,1528895399.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:59.508Z,1528895399.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:59.526Z,1528895399.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:09:59.910Z,1528895399.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:09:59.932Z,1528895399.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:00.310Z,1528895400.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:00.332Z,1528895400.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:00.698Z,1528895400.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:00.716Z,1528895400.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:01.101Z,1528895401.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:01.119Z,1528895401.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:01.502Z,1528895401.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:01.520Z,1528895401.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:04.607Z,1528895404.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:04.625Z,1528895404.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:04.761Z,1528895404.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:04.803Z,1528895404.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:05.159Z,1528895405.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:05.177Z,1528895405.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:05.560Z,1528895405.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:05.580Z,1528895405.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:05.935Z,1528895405.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:05.962Z,1528895405.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:06.335Z,1528895406.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:06.368Z,1528895406.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:06.731Z,1528895406.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:06.775Z,1528895406.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:07.135Z,1528895407.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:07.168Z,1528895407.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:07.554Z,1528895407.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:07.576Z,1528895407.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:07.956Z,1528895407.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:07.974Z,1528895407.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:08.345Z,1528895408.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:08.373Z,1528895408.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:08.735Z,1528895408.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:08.768Z,1528895408.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:09.131Z,1528895409.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:09.148Z,1528895409.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:09.536Z,1528895409.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:09.554Z,1528895409.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:09.939Z,1528895409.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:09.956Z,1528895409.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:10.349Z,1528895410.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:10.385Z,1528895410.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:10.753Z,1528895410.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:10.780Z,1528895410.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:11.149Z,1528895411.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:11.185Z,1528895411.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:11.539Z,1528895411.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:11.557Z,1528895411.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:11.939Z,1528895411.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:11.957Z,1528895411.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:12.339Z,1528895412.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:12.356Z,1528895412.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:12.739Z,1528895412.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:12.756Z,1528895412.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:13.138Z,1528895413.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:13.164Z,1528895413.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:13.549Z,1528895413.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:13.587Z,1528895413.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:13.949Z,1528895413.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:13.990Z,1528895413.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:14.350Z,1528895414.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:14.383Z,1528895414.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:14.738Z,1528895414.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:14.756Z,1528895414.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:15.139Z,1528895415.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:15.156Z,1528895415.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:15.540Z,1528895415.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:15.559Z,1528895415.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:15.941Z,1528895415.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:15.964Z,1528895415.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:16.347Z,1528895416.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:16.365Z,1528895416.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:16.749Z,1528895416.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:16.772Z,1528895416.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:17.151Z,1528895417.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:17.169Z,1528895417.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:17.542Z,1528895417.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:17.559Z,1528895417.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:17.941Z,1528895417.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:17.959Z,1528895417.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:18.334Z,1528895418.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:18.367Z,1528895418.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:18.743Z,1528895418.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:18.761Z,1528895418.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:19.142Z,1528895419.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:19.164Z,1528895419.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:19.550Z,1528895419.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:19.567Z,1528895419.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:19.951Z,1528895419.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:19.968Z,1528895419.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:20.350Z,1528895420.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:20.368Z,1528895420.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:20.739Z,1528895420.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:20.762Z,1528895420.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:21.136Z,1528895421.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:21.161Z,1528895421.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:21.542Z,1528895421.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:21.559Z,1528895421.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:21.934Z,1528895421.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:21.970Z,1528895421.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:22.352Z,1528895422.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:22.376Z,1528895422.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:22.750Z,1528895422.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:22.772Z,1528895422.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:23.151Z,1528895423.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:23.169Z,1528895423.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:23.542Z,1528895423.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:23.565Z,1528895423.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:23.938Z,1528895423.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:23.956Z,1528895423.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:24.339Z,1528895424.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:24.362Z,1528895424.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:24.747Z,1528895424.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:24.765Z,1528895424.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:25.137Z,1528895425.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:25.155Z,1528895425.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:25.550Z,1528895425.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:25.598Z,1528895425.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:25.951Z,1528895425.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:25.969Z,1528895425.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:26.348Z,1528895426.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:26.366Z,1528895426.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:26.731Z,1528895426.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:26.775Z,1528895426.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:27.135Z,1528895427.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:27.175Z,1528895427.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:27.536Z,1528895427.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:27.574Z,1528895427.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:27.935Z,1528895427.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:27.975Z,1528895427.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:28.350Z,1528895428.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:28.379Z,1528895428.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:28.749Z,1528895428.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:28.784Z,1528895428.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:29.145Z,1528895429.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:29.173Z,1528895429.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:29.535Z,1528895429.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:29.570Z,1528895429.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:29.931Z,1528895429.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:29.949Z,1528895429.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:30.335Z,1528895430.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:30.352Z,1528895430.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:30.737Z,1528895430.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:30.776Z,1528895430.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:31.134Z,1528895431.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:31.152Z,1528895431.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:31.549Z,1528895431.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:31.587Z,1528895431.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:31.949Z,1528895431.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:31.967Z,1528895431.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:32.342Z,1528895432.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:32.364Z,1528895432.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:32.740Z,1528895432.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:32.758Z,1528895432.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:33.141Z,1528895433.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:33.159Z,1528895433.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:33.542Z,1528895433.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:33.559Z,1528895433.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:33.939Z,1528895433.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:33.956Z,1528895433.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:34.349Z,1528895434.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:34.367Z,1528895434.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:34.749Z,1528895434.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:34.772Z,1528895434.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:35.146Z,1528895435.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:35.163Z,1528895435.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:35.541Z,1528895435.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:35.559Z,1528895435.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:35.940Z,1528895435.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:35.957Z,1528895435.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:36.339Z,1528895436.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:36.356Z,1528895436.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:36.741Z,1528895436.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:36.759Z,1528895436.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:37.140Z,1528895437.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:37.164Z,1528895437.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:37.546Z,1528895437.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:37.564Z,1528895437.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:37.949Z,1528895437.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:37.967Z,1528895437.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:38.342Z,1528895438.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:38.364Z,1528895438.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:38.740Z,1528895438.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:38.757Z,1528895438.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:39.141Z,1528895439.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:39.159Z,1528895439.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:39.541Z,1528895439.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:39.560Z,1528895439.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:39.940Z,1528895439.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:39.958Z,1528895439.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:40.349Z,1528895440.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:40.367Z,1528895440.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:40.745Z,1528895440.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:40.763Z,1528895440.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:41.146Z,1528895441.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:41.163Z,1528895441.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:41.541Z,1528895441.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:41.559Z,1528895441.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:41.935Z,1528895441.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:41.957Z,1528895441.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:42.338Z,1528895442.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:42.370Z,1528895442.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:42.740Z,1528895442.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:42.764Z,1528895442.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:43.135Z,1528895443.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:43.165Z,1528895443.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:43.546Z,1528895443.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:43.568Z,1528895443.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:43.949Z,1528895443.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:43.967Z,1528895443.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:44.346Z,1528895444.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:44.372Z,1528895444.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:44.741Z,1528895444.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:44.758Z,1528895444.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:45.142Z,1528895445.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:45.160Z,1528895445.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:45.541Z,1528895445.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:45.559Z,1528895445.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:45.941Z,1528895445.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:45.958Z,1528895445.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:46.349Z,1528895446.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:46.368Z,1528895446.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:46.746Z,1528895446.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:46.768Z,1528895446.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:47.147Z,1528895447.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:47.164Z,1528895447.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:47.539Z,1528895447.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:47.572Z,1528895447.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:47.935Z,1528895447.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:47.959Z,1528895447.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:48.339Z,1528895448.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:48.373Z,1528895448.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:48.739Z,1528895448.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:48.764Z,1528895448.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:49.135Z,1528895449.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:49.159Z,1528895449.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:49.551Z,1528895449.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:49.569Z,1528895449.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:49.951Z,1528895449.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:49.969Z,1528895449.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:50.347Z,1528895450.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:50.365Z,1528895450.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:50.745Z,1528895450.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:50.763Z,1528895450.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:51.139Z,1528895451.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:51.166Z,1528895451.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:51.535Z,1528895451.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:51.560Z,1528895451.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:51.942Z,1528895451.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:51.964Z,1528895451.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:52.354Z,1528895452.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:52.376Z,1528895452.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:52.755Z,1528895452.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:52.780Z,1528895452.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:53.152Z,1528895453.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:53.170Z,1528895453.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:53.535Z,1528895453.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:53.565Z,1528895453.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:53.931Z,1528895453.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:53.968Z,1528895453.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:54.335Z,1528895454.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:54.371Z,1528895454.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:54.736Z,1528895454.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:54.770Z,1528895454.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:55.135Z,1528895455.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:55.162Z,1528895455.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:55.551Z,1528895455.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:55.570Z,1528895455.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:55.956Z,1528895455.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:55.975Z,1528895455.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:56.347Z,1528895456.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:56.365Z,1528895456.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:56.735Z,1528895456.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:56.772Z,1528895456.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:57.135Z,1528895457.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:57.174Z,1528895457.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:57.536Z,1528895457.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:57.563Z,1528895457.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:57.935Z,1528895457.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:57.961Z,1528895457.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:58.356Z,1528895458.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:58.374Z,1528895458.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:58.751Z,1528895458.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:58.769Z,1528895458.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:59.151Z,1528895459.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:59.169Z,1528895459.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:59.535Z,1528895459.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:59.570Z,1528895459.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:10:59.939Z,1528895459.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:10:59.966Z,1528895459.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:00.339Z,1528895460.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:00.372Z,1528895460.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:00.740Z,1528895460.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:00.770Z,1528895460.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:01.135Z,1528895461.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:01.176Z,1528895461.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:01.552Z,1528895461.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:01.570Z,1528895461.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:01.960Z,1528895461.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:01.978Z,1528895461.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:02.357Z,1528895462.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:02.380Z,1528895462.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:02.739Z,1528895462.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:02.767Z,1528895462.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:03.135Z,1528895463.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:03.169Z,1528895463.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:03.537Z,1528895463.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:03.566Z,1528895463.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:03.940Z,1528895463.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:03.967Z,1528895463.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:07.067Z,1528895467.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:07.085Z,1528895467.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:07.237Z,1528895467.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:07.275Z,1528895467.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:07.637Z,1528895467.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:07.664Z,1528895467.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:08.031Z,1528895468.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:08.072Z,1528895468.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:08.431Z,1528895468.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:08.448Z,1528895468.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:08.832Z,1528895468.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:08.850Z,1528895468.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:09.230Z,1528895469.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:09.248Z,1528895469.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:09.641Z,1528895469.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:09.679Z,1528895469.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:10.041Z,1528895470.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:10.059Z,1528895470.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:10.441Z,1528895470.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:10.459Z,1528895470.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:10.827Z,1528895470.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:10.866Z,1528895470.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:11.231Z,1528895471.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:11.259Z,1528895471.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:11.636Z,1528895471.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:11.654Z,1528895471.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:12.038Z,1528895472.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:12.060Z,1528895472.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:12.441Z,1528895472.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:12.459Z,1528895472.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:12.843Z,1528895472.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:12.868Z,1528895472.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:13.250Z,1528895473.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:13.268Z,1528895473.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:13.638Z,1528895473.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:13.660Z,1528895473.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:14.034Z,1528895474.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:14.057Z,1528895474.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:14.423Z,1528895474.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:14.453Z,1528895474.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:14.831Z,1528895474.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:14.860Z,1528895474.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:15.227Z,1528895475.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:15.257Z,1528895475.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:15.644Z,1528895475.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:15.662Z,1528895475.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:16.048Z,1528895476.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:16.066Z,1528895476.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:16.448Z,1528895476.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:16.467Z,1528895476.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:16.823Z,1528895476.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:16.840Z,1528895476.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:17.227Z,1528895477.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:17.244Z,1528895477.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:17.628Z,1528895477.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:17.646Z,1528895477.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:18.027Z,1528895478.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:18.052Z,1528895478.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:18.441Z,1528895478.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:18.479Z,1528895478.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:18.841Z,1528895478.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:18.859Z,1528895478.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:19.245Z,1528895479.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:19.263Z,1528895479.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:19.633Z,1528895479.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:19.650Z,1528895479.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:20.023Z,1528895480.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:20.066Z,1528895480.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:20.423Z,1528895480.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:20.458Z,1528895480.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:20.828Z,1528895480.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:20.868Z,1528895480.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:21.227Z,1528895481.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:21.262Z,1528895481.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:21.644Z,1528895481.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:21.668Z,1528895481.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:22.046Z,1528895482.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:22.063Z,1528895482.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:22.446Z,1528895482.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:22.472Z,1528895482.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:22.823Z,1528895482.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:22.856Z,1528895482.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:23.227Z,1528895483.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:23.256Z,1528895483.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:23.628Z,1528895483.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:23.662Z,1528895483.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:24.023Z,1528895484.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:24.040Z,1528895484.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:24.441Z,1528895484.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:24.469Z,1528895484.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:24.837Z,1528895484.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:24.877Z,1528895484.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:25.256Z,1528895485.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:25.274Z,1528895485.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:25.627Z,1528895485.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:25.644Z,1528895485.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:26.028Z,1528895486.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:26.071Z,1528895486.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:26.430Z,1528895486.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:26.448Z,1528895486.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:26.830Z,1528895486.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:26.852Z,1528895486.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:27.230Z,1528895487.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:27.249Z,1528895487.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:27.633Z,1528895487.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:27.651Z,1528895487.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:28.041Z,1528895488.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:28.075Z,1528895488.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:28.441Z,1528895488.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:28.459Z,1528895488.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:28.831Z,1528895488.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:28.848Z,1528895488.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:29.232Z,1528895489.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:29.250Z,1528895489.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:29.632Z,1528895489.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:29.654Z,1528895489.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:30.031Z,1528895490.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:30.049Z,1528895490.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:30.438Z,1528895490.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:30.460Z,1528895490.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:30.841Z,1528895490.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:30.859Z,1528895490.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:31.242Z,1528895491.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:31.259Z,1528895491.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:31.631Z,1528895491.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:31.653Z,1528895491.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:32.034Z,1528895492.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:32.064Z,1528895492.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:32.427Z,1528895492.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:32.450Z,1528895492.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:32.834Z,1528895492.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:32.851Z,1528895492.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:33.234Z,1528895493.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:33.252Z,1528895493.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:33.639Z,1528895493.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:33.657Z,1528895493.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:34.043Z,1528895494.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:34.061Z,1528895494.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:34.443Z,1528895494.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:34.461Z,1528895494.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:34.826Z,1528895494.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:34.859Z,1528895494.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:35.231Z,1528895495.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:35.254Z,1528895495.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:35.635Z,1528895495.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:35.653Z,1528895495.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:36.029Z,1528895496.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:36.047Z,1528895496.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:36.441Z,1528895496.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:36.459Z,1528895496.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:36.843Z,1528895496.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:36.861Z,1528895496.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:37.289Z,1528895497.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:37.318Z,1528895497.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:37.631Z,1528895497.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:37.655Z,1528895497.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:38.035Z,1528895498.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:38.053Z,1528895498.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:38.434Z,1528895498.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:38.459Z,1528895498.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:38.835Z,1528895498.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:38.853Z,1528895498.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:39.234Z,1528895499.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:39.252Z,1528895499.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:39.640Z,1528895499.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:39.658Z,1528895499.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:40.046Z,1528895500.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:40.064Z,1528895500.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:40.446Z,1528895500.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:40.476Z,1528895500.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:40.827Z,1528895500.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:40.863Z,1528895500.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:41.227Z,1528895501.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:41.264Z,1528895501.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:41.639Z,1528895501.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:41.656Z,1528895501.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:42.023Z,1528895502.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:42.050Z,1528895502.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:42.444Z,1528895502.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:42.469Z,1528895502.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:42.847Z,1528895502.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:42.873Z,1528895502.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:43.251Z,1528895503.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:43.268Z,1528895503.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:43.628Z,1528895503.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:43.663Z,1528895503.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:44.027Z,1528895504.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:44.062Z,1528895504.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:44.427Z,1528895504.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:44.460Z,1528895504.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:44.828Z,1528895504.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:44.866Z,1528895504.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:45.227Z,1528895505.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:45.265Z,1528895505.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:45.638Z,1528895505.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:45.666Z,1528895505.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:46.041Z,1528895506.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:46.076Z,1528895506.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:46.441Z,1528895506.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:46.470Z,1528895506.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:46.823Z,1528895506.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:46.840Z,1528895506.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:47.227Z,1528895507.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:47.244Z,1528895507.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:47.628Z,1528895507.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:47.646Z,1528895507.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:48.027Z,1528895508.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:48.044Z,1528895508.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:48.445Z,1528895508.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:48.473Z,1528895508.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:48.845Z,1528895508.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:48.874Z,1528895508.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:49.241Z,1528895509.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:49.275Z,1528895509.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:49.631Z,1528895509.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:49.672Z,1528895509.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:50.030Z,1528895510.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:50.048Z,1528895510.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:50.426Z,1528895510.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:50.445Z,1528895510.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:50.831Z,1528895510.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:50.849Z,1528895510.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:51.230Z,1528895511.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:51.248Z,1528895511.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:51.641Z,1528895511.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:51.659Z,1528895511.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:52.041Z,1528895512.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:52.059Z,1528895512.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:52.442Z,1528895512.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:52.460Z,1528895512.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:52.828Z,1528895512.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:52.858Z,1528895512.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:53.232Z,1528895513.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:53.258Z,1528895513.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:53.631Z,1528895513.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:53.658Z,1528895513.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:54.023Z,1528895514.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:54.059Z,1528895514.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:54.438Z,1528895514.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:54.466Z,1528895514.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:54.843Z,1528895514.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:54.862Z,1528895514.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:55.244Z,1528895515.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:55.268Z,1528895515.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:55.627Z,1528895515.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:55.661Z,1528895515.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:56.027Z,1528895516.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:56.055Z,1528895516.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:56.423Z,1528895516.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:56.450Z,1528895516.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:56.827Z,1528895516.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:56.854Z,1528895516.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:57.227Z,1528895517.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:57.255Z,1528895517.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:57.639Z,1528895517.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:57.657Z,1528895517.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:58.047Z,1528895518.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:58.065Z,1528895518.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:58.443Z,1528895518.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:58.460Z,1528895518.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:58.823Z,1528895518.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:58.850Z,1528895518.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:59.227Z,1528895519.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:59.261Z,1528895519.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:11:59.623Z,1528895519.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:11:59.652Z,1528895519.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:00.027Z,1528895520.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:00.054Z,1528895520.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:00.057Z,1528895520.057 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T13:12:00.058Z,1528895520.058 [Default:CheckIn:C.Wait] Stopped
2018-06-13T13:12:00.058Z,1528895520.058 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T13:12:00.058Z,1528895520.058 [Default:CheckIn:D] Running Loop=1
2018-06-13T13:12:00.446Z,1528895520.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:00.468Z,1528895520.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:00.471Z,1528895520.471 [Default:CheckIn:D] Stopped
2018-06-13T13:12:00.471Z,1528895520.471 [Default:CheckIn:E] Running Loop=1
2018-06-13T13:12:00.847Z,1528895520.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:00.872Z,1528895520.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:00.875Z,1528895520.875 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 584.783789 min 
2018-06-13T13:12:00.875Z,1528895520.875 [Default:CheckIn:E] Stopped
2018-06-13T13:12:00.875Z,1528895520.875 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T13:12:00.875Z,1528895520.875 [Default:CheckIn] Stopped
2018-06-13T13:12:00.875Z,1528895520.875 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T13:12:00.876Z,1528895520.876 [Default:CheckIn](INFO): Running loop #57
2018-06-13T13:12:00.876Z,1528895520.876 [Default:CheckIn] Running Loop=57
2018-06-13T13:12:00.876Z,1528895520.876 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T13:12:00.876Z,1528895520.876 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T13:12:01.237Z,1528895521.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:01.271Z,1528895521.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:01.631Z,1528895521.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:01.663Z,1528895521.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:02.031Z,1528895522.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:02.065Z,1528895522.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:02.427Z,1528895522.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:02.461Z,1528895522.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:02.832Z,1528895522.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:02.870Z,1528895522.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:03.227Z,1528895523.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:03.245Z,1528895523.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:03.641Z,1528895523.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:03.667Z,1528895523.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:04.041Z,1528895524.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:04.067Z,1528895524.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:07.159Z,1528895527.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:07.177Z,1528895527.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:07.287Z,1528895527.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:07.331Z,1528895527.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:07.696Z,1528895527.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:07.723Z,1528895527.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:08.095Z,1528895528.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:08.125Z,1528895528.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:08.497Z,1528895528.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:08.531Z,1528895528.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:08.910Z,1528895528.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:08.928Z,1528895528.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:09.308Z,1528895529.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:09.326Z,1528895529.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:09.687Z,1528895529.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:09.721Z,1528895529.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:10.091Z,1528895530.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:10.132Z,1528895530.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:10.487Z,1528895530.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:10.504Z,1528895530.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:10.892Z,1528895530.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:10.926Z,1528895530.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:11.291Z,1528895531.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:11.308Z,1528895531.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:11.705Z,1528895531.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:11.738Z,1528895531.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:12.105Z,1528895532.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:12.131Z,1528895532.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:12.505Z,1528895532.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:12.537Z,1528895532.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:12.894Z,1528895532.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:12.912Z,1528895532.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:13.294Z,1528895533.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:13.312Z,1528895533.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:13.695Z,1528895533.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:13.712Z,1528895533.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:14.090Z,1528895534.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:14.107Z,1528895534.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:14.501Z,1528895534.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:14.535Z,1528895534.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:14.906Z,1528895534.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:14.940Z,1528895534.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:15.304Z,1528895535.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:15.321Z,1528895535.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:15.698Z,1528895535.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:15.716Z,1528895535.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:16.094Z,1528895536.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:16.112Z,1528895536.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:16.493Z,1528895536.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:16.511Z,1528895536.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:16.894Z,1528895536.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:16.911Z,1528895536.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:16.911Z,1528895536.911 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 195
2018-06-13T13:12:16.911Z,1528895536.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:12:16.913Z,1528895536.913 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:16.914Z,1528895536.914 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 195
2018-06-13T13:12:16.914Z,1528895536.914 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:12:16.915Z,1528895536.915 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:16.915Z,1528895536.915 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 195
2018-06-13T13:12:16.915Z,1528895536.915 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:12:16.993Z,1528895536.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:12:16.993Z,1528895536.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:12:16.994Z,1528895536.994 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:12:17.294Z,1528895537.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:17.400Z,1528895537.400 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:12:17.400Z,1528895537.400 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 195
2018-06-13T13:12:17.401Z,1528895537.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:12:17.401Z,1528895537.401 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 195
2018-06-13T13:12:17.401Z,1528895537.401 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:12:17.401Z,1528895537.401 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 195
2018-06-13T13:12:17.702Z,1528895537.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:17.731Z,1528895537.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:12:17.731Z,1528895537.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:12:17.732Z,1528895537.732 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:12:17.732Z,1528895537.732 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:12:17.732Z,1528895537.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:12:17.745Z,1528895537.745 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:12:17.745Z,1528895537.745 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:12:17.746Z,1528895537.746 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:12:17.746Z,1528895537.746 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:12:18.111Z,1528895538.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:18.128Z,1528895538.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:12:18.129Z,1528895538.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:18.507Z,1528895538.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:18.525Z,1528895538.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:12:18.526Z,1528895538.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:18.887Z,1528895538.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:18.915Z,1528895538.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:12:18.916Z,1528895538.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:19.291Z,1528895539.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:19.328Z,1528895539.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:12:19.333Z,1528895539.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:19.692Z,1528895539.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:19.731Z,1528895539.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:12:19.732Z,1528895539.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:20.091Z,1528895540.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:20.118Z,1528895540.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:12:20.119Z,1528895540.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:20.512Z,1528895540.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:20.530Z,1528895540.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:12:20.531Z,1528895540.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:20.911Z,1528895540.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:20.928Z,1528895540.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:12:20.930Z,1528895540.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:21.309Z,1528895541.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:21.331Z,1528895541.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:12:21.332Z,1528895541.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:21.695Z,1528895541.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:21.722Z,1528895541.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:12:21.723Z,1528895541.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:22.092Z,1528895542.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:22.127Z,1528895542.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:12:22.128Z,1528895542.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:22.492Z,1528895542.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:22.523Z,1528895542.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:12:22.524Z,1528895542.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:22.892Z,1528895542.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:22.921Z,1528895542.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:12:22.922Z,1528895542.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:23.291Z,1528895543.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:23.327Z,1528895543.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:12:23.328Z,1528895543.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:23.713Z,1528895543.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:23.730Z,1528895543.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:12:23.731Z,1528895543.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:24.112Z,1528895544.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:24.130Z,1528895544.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:12:24.131Z,1528895544.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:24.503Z,1528895544.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:24.539Z,1528895544.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:12:24.540Z,1528895544.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:24.891Z,1528895544.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:24.929Z,1528895544.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:12:24.930Z,1528895544.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:25.291Z,1528895545.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:25.329Z,1528895545.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:12:25.330Z,1528895545.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:25.692Z,1528895545.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:25.731Z,1528895545.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:12:25.732Z,1528895545.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:26.091Z,1528895546.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:26.108Z,1528895546.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:12:26.129Z,1528895546.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:26.506Z,1528895546.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:26.534Z,1528895546.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:12:26.535Z,1528895546.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:26.909Z,1528895546.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:26.944Z,1528895546.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:12:26.945Z,1528895546.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:27.309Z,1528895547.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:27.340Z,1528895547.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:12:27.341Z,1528895547.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:27.695Z,1528895547.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:27.712Z,1528895547.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:12:27.733Z,1528895547.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:28.095Z,1528895548.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:28.112Z,1528895548.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T13:12:28.113Z,1528895548.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:28.494Z,1528895548.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:28.511Z,1528895548.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T13:12:28.512Z,1528895548.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:28.895Z,1528895548.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:28.912Z,1528895548.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T13:12:28.913Z,1528895548.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:29.295Z,1528895549.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:29.312Z,1528895549.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T13:12:29.313Z,1528895549.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:29.701Z,1528895549.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:29.718Z,1528895549.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T13:12:29.719Z,1528895549.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:30.105Z,1528895550.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:30.123Z,1528895550.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T13:12:30.123Z,1528895550.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:30.502Z,1528895550.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:30.519Z,1528895550.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T13:12:30.520Z,1528895550.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:30.898Z,1528895550.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:30.915Z,1528895550.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T13:12:30.916Z,1528895550.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:31.296Z,1528895551.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:31.316Z,1528895551.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T13:12:31.318Z,1528895551.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:31.696Z,1528895551.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:31.716Z,1528895551.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T13:12:31.717Z,1528895551.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:32.101Z,1528895552.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:32.123Z,1528895552.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T13:12:32.124Z,1528895552.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:32.502Z,1528895552.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:32.524Z,1528895552.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T13:12:32.525Z,1528895552.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:32.902Z,1528895552.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:32.924Z,1528895552.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T13:12:32.925Z,1528895552.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:33.305Z,1528895553.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:33.323Z,1528895553.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T13:12:33.324Z,1528895553.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:33.697Z,1528895553.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:33.715Z,1528895553.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T13:12:33.716Z,1528895553.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:34.098Z,1528895554.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:34.115Z,1528895554.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T13:12:34.116Z,1528895554.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:34.498Z,1528895554.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:34.520Z,1528895554.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T13:12:34.521Z,1528895554.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:34.898Z,1528895554.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:34.915Z,1528895554.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T13:12:34.916Z,1528895554.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:35.295Z,1528895555.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:35.325Z,1528895555.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T13:12:35.326Z,1528895555.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:35.708Z,1528895555.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:35.731Z,1528895555.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T13:12:35.732Z,1528895555.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:36.107Z,1528895556.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:36.132Z,1528895556.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T13:12:36.149Z,1528895556.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:36.505Z,1528895556.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:36.526Z,1528895556.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T13:12:36.527Z,1528895556.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:36.896Z,1528895556.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:36.937Z,1528895556.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:37.288Z,1528895557.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:37.320Z,1528895557.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:37.692Z,1528895557.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:37.722Z,1528895557.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:38.092Z,1528895558.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:38.124Z,1528895558.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:38.509Z,1528895558.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:38.526Z,1528895558.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:38.912Z,1528895558.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:38.930Z,1528895558.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:39.312Z,1528895559.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:39.336Z,1528895559.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:39.691Z,1528895559.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:39.719Z,1528895559.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:40.091Z,1528895560.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:40.127Z,1528895560.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:40.491Z,1528895560.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:40.529Z,1528895560.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:40.888Z,1528895560.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:40.921Z,1528895560.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:41.291Z,1528895561.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:41.328Z,1528895561.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:41.712Z,1528895561.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:41.730Z,1528895561.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:42.106Z,1528895562.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:42.128Z,1528895562.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:42.500Z,1528895562.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:42.532Z,1528895562.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:42.891Z,1528895562.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:42.930Z,1528895562.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:43.287Z,1528895563.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:43.316Z,1528895563.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:43.692Z,1528895563.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:43.718Z,1528895563.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:44.091Z,1528895564.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:44.125Z,1528895564.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:44.505Z,1528895564.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:44.532Z,1528895564.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:44.905Z,1528895564.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:44.932Z,1528895564.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:45.306Z,1528895565.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:45.334Z,1528895565.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:45.692Z,1528895565.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:45.732Z,1528895565.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:46.095Z,1528895566.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:46.113Z,1528895566.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:46.495Z,1528895566.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:46.514Z,1528895566.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:46.890Z,1528895566.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:46.908Z,1528895566.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:47.294Z,1528895567.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:47.312Z,1528895567.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:47.706Z,1528895567.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:47.740Z,1528895567.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:48.105Z,1528895568.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:48.123Z,1528895568.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:48.501Z,1528895568.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:48.519Z,1528895568.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:48.898Z,1528895568.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:48.915Z,1528895568.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:49.295Z,1528895569.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:49.313Z,1528895569.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:49.696Z,1528895569.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:49.714Z,1528895569.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:50.091Z,1528895570.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:50.125Z,1528895570.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:50.503Z,1528895570.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:50.528Z,1528895570.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:50.905Z,1528895570.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:50.923Z,1528895570.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:51.305Z,1528895571.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:51.323Z,1528895571.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:51.697Z,1528895571.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:51.715Z,1528895571.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:52.095Z,1528895572.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:52.117Z,1528895572.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:52.498Z,1528895572.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:52.516Z,1528895572.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:52.891Z,1528895572.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:52.915Z,1528895572.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:53.290Z,1528895573.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:53.319Z,1528895573.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:53.710Z,1528895573.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:53.732Z,1528895573.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:54.107Z,1528895574.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:54.125Z,1528895574.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:54.507Z,1528895574.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:54.532Z,1528895574.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:54.887Z,1528895574.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:54.925Z,1528895574.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:55.297Z,1528895575.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:55.316Z,1528895575.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:55.687Z,1528895575.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:55.726Z,1528895575.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:56.087Z,1528895576.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:56.125Z,1528895576.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:56.503Z,1528895576.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:56.521Z,1528895576.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:56.911Z,1528895576.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:56.929Z,1528895576.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:57.312Z,1528895577.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:57.330Z,1528895577.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:57.687Z,1528895577.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:57.724Z,1528895577.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:58.091Z,1528895578.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:58.118Z,1528895578.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:58.491Z,1528895578.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:58.520Z,1528895578.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:58.888Z,1528895578.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:58.927Z,1528895578.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:59.291Z,1528895579.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:59.319Z,1528895579.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:12:59.712Z,1528895579.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:12:59.731Z,1528895579.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:00.116Z,1528895580.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:00.134Z,1528895580.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:00.512Z,1528895580.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:00.536Z,1528895580.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:03.619Z,1528895583.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:03.637Z,1528895583.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:03.735Z,1528895583.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:03.776Z,1528895583.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:04.159Z,1528895584.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:04.177Z,1528895584.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:04.565Z,1528895584.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:04.583Z,1528895584.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:04.960Z,1528895584.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:04.978Z,1528895584.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:05.339Z,1528895585.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:05.376Z,1528895585.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:05.740Z,1528895585.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:05.771Z,1528895585.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:06.140Z,1528895586.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:06.173Z,1528895586.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:06.550Z,1528895586.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:06.583Z,1528895586.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:06.954Z,1528895586.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:06.983Z,1528895586.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:07.346Z,1528895587.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:07.380Z,1528895587.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:07.743Z,1528895587.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:07.784Z,1528895587.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:08.143Z,1528895588.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:08.162Z,1528895588.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:08.542Z,1528895588.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:08.560Z,1528895588.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:08.938Z,1528895588.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:08.964Z,1528895588.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:09.345Z,1528895589.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:09.364Z,1528895589.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:09.750Z,1528895589.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:09.768Z,1528895589.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:10.154Z,1528895590.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:10.172Z,1528895590.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:10.553Z,1528895590.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:10.571Z,1528895590.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:10.939Z,1528895590.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:10.973Z,1528895590.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:11.345Z,1528895591.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:11.362Z,1528895591.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:11.745Z,1528895591.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:11.763Z,1528895591.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:12.145Z,1528895592.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:12.163Z,1528895592.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:12.550Z,1528895592.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:12.568Z,1528895592.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:12.953Z,1528895592.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:12.971Z,1528895592.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:13.350Z,1528895593.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:13.367Z,1528895593.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:13.745Z,1528895593.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:13.762Z,1528895593.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:14.146Z,1528895594.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:14.164Z,1528895594.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:14.545Z,1528895594.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:14.563Z,1528895594.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:14.940Z,1528895594.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:14.963Z,1528895594.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:15.346Z,1528895595.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:15.363Z,1528895595.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:15.750Z,1528895595.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:15.768Z,1528895595.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:16.154Z,1528895596.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:16.171Z,1528895596.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:16.554Z,1528895596.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:16.571Z,1528895596.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:16.941Z,1528895596.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:16.959Z,1528895596.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:17.343Z,1528895597.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:17.373Z,1528895597.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:17.747Z,1528895597.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:17.765Z,1528895597.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:18.135Z,1528895598.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:18.171Z,1528895598.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:18.555Z,1528895598.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:18.573Z,1528895598.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:18.959Z,1528895598.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:18.978Z,1528895598.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:19.357Z,1528895599.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:19.374Z,1528895599.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:19.736Z,1528895599.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:19.772Z,1528895599.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:20.139Z,1528895600.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:20.182Z,1528895600.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:20.535Z,1528895600.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:20.563Z,1528895600.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:20.950Z,1528895600.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:20.972Z,1528895600.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:21.339Z,1528895601.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:21.368Z,1528895601.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:21.758Z,1528895601.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:21.775Z,1528895601.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:22.159Z,1528895602.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:22.177Z,1528895602.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:22.560Z,1528895602.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:22.578Z,1528895602.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:22.935Z,1528895602.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:22.972Z,1528895602.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:23.339Z,1528895603.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:23.372Z,1528895603.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:23.740Z,1528895603.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:23.769Z,1528895603.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:24.135Z,1528895604.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:24.172Z,1528895604.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:24.560Z,1528895604.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:24.584Z,1528895604.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:24.960Z,1528895604.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:24.978Z,1528895604.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:25.351Z,1528895605.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:25.370Z,1528895605.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:25.739Z,1528895605.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:25.776Z,1528895605.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:26.139Z,1528895606.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:26.168Z,1528895606.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:26.536Z,1528895606.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:26.568Z,1528895606.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:26.940Z,1528895606.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:26.975Z,1528895606.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:27.339Z,1528895607.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:27.376Z,1528895607.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:27.752Z,1528895607.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:27.776Z,1528895607.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:28.159Z,1528895608.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:28.177Z,1528895608.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:28.560Z,1528895608.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:28.584Z,1528895608.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:28.939Z,1528895608.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:28.966Z,1528895608.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:29.340Z,1528895609.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:29.367Z,1528895609.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:29.740Z,1528895609.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:29.769Z,1528895609.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:30.139Z,1528895610.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:30.166Z,1528895610.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:30.555Z,1528895610.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:30.572Z,1528895610.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:30.960Z,1528895610.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:30.978Z,1528895610.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:31.357Z,1528895611.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:31.374Z,1528895611.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:31.735Z,1528895611.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:31.771Z,1528895611.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:32.139Z,1528895612.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:32.174Z,1528895612.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:32.535Z,1528895612.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:32.568Z,1528895612.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:32.940Z,1528895612.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:32.977Z,1528895612.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:33.339Z,1528895613.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:33.377Z,1528895613.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:33.745Z,1528895613.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:33.779Z,1528895613.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:34.153Z,1528895614.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:34.186Z,1528895614.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:34.557Z,1528895614.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:34.586Z,1528895614.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:34.943Z,1528895614.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:34.961Z,1528895614.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:35.342Z,1528895615.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:35.360Z,1528895615.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:35.742Z,1528895615.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:35.760Z,1528895615.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:36.143Z,1528895616.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:36.160Z,1528895616.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:36.553Z,1528895616.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:36.571Z,1528895616.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:36.953Z,1528895616.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:36.971Z,1528895616.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:37.346Z,1528895617.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:37.368Z,1528895617.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:37.744Z,1528895617.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:37.762Z,1528895617.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:38.145Z,1528895618.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:38.164Z,1528895618.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:38.550Z,1528895618.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:38.567Z,1528895618.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:38.953Z,1528895618.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:38.971Z,1528895618.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:39.353Z,1528895619.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:39.371Z,1528895619.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:39.740Z,1528895619.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:39.758Z,1528895619.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:40.144Z,1528895620.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:40.161Z,1528895620.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:40.545Z,1528895620.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:40.563Z,1528895620.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:40.946Z,1528895620.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:40.963Z,1528895620.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:41.344Z,1528895621.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:41.362Z,1528895621.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:41.753Z,1528895621.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:41.771Z,1528895621.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:42.149Z,1528895622.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:42.167Z,1528895622.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:42.549Z,1528895622.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:42.567Z,1528895622.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:42.946Z,1528895622.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:42.963Z,1528895622.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:43.344Z,1528895623.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:43.362Z,1528895623.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:43.744Z,1528895623.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:43.770Z,1528895623.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:44.149Z,1528895624.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:44.167Z,1528895624.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:44.550Z,1528895624.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:44.568Z,1528895624.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:44.953Z,1528895624.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:44.972Z,1528895624.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:45.354Z,1528895625.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:45.371Z,1528895625.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:45.750Z,1528895625.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:45.768Z,1528895625.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:46.145Z,1528895626.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:46.162Z,1528895626.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:46.554Z,1528895626.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:46.572Z,1528895626.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:46.950Z,1528895626.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:46.972Z,1528895626.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:47.350Z,1528895627.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:47.372Z,1528895627.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:47.748Z,1528895627.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:47.766Z,1528895627.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:48.145Z,1528895628.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:48.163Z,1528895628.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:48.549Z,1528895628.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:48.567Z,1528895628.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:48.953Z,1528895628.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:48.972Z,1528895628.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:49.350Z,1528895629.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:49.367Z,1528895629.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:49.745Z,1528895629.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:49.764Z,1528895629.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:50.146Z,1528895630.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:50.164Z,1528895630.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:50.550Z,1528895630.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:50.572Z,1528895630.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:50.953Z,1528895630.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:50.971Z,1528895630.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:51.353Z,1528895631.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:51.371Z,1528895631.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:51.739Z,1528895631.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:51.762Z,1528895631.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:52.145Z,1528895632.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:52.162Z,1528895632.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:52.553Z,1528895632.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:52.571Z,1528895632.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:52.953Z,1528895632.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:52.971Z,1528895632.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:53.350Z,1528895633.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:53.372Z,1528895633.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:53.740Z,1528895633.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:53.766Z,1528895633.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:54.139Z,1528895634.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:54.162Z,1528895634.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:54.551Z,1528895634.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:54.568Z,1528895634.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:54.954Z,1528895634.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:54.971Z,1528895634.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:55.351Z,1528895635.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:55.368Z,1528895635.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:55.745Z,1528895635.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:55.763Z,1528895635.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:56.146Z,1528895636.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:56.164Z,1528895636.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:56.550Z,1528895636.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:56.573Z,1528895636.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:56.953Z,1528895636.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:56.971Z,1528895636.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:57.353Z,1528895637.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:57.371Z,1528895637.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:57.746Z,1528895637.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:57.764Z,1528895637.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:58.146Z,1528895638.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:58.163Z,1528895638.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:58.553Z,1528895638.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:58.571Z,1528895638.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:58.950Z,1528895638.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:58.972Z,1528895638.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:59.353Z,1528895639.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:59.370Z,1528895639.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:13:59.747Z,1528895639.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:13:59.765Z,1528895639.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:00.146Z,1528895640.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:00.163Z,1528895640.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:00.553Z,1528895640.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:00.571Z,1528895640.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:00.953Z,1528895640.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:00.971Z,1528895640.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:01.350Z,1528895641.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:01.376Z,1528895641.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:01.746Z,1528895641.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:01.767Z,1528895641.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:04.854Z,1528895644.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:04.871Z,1528895644.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:05.010Z,1528895645.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:05.048Z,1528895645.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:05.421Z,1528895645.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:05.447Z,1528895645.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:05.817Z,1528895645.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:05.855Z,1528895645.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:06.207Z,1528895646.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:06.232Z,1528895646.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:06.606Z,1528895646.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:06.624Z,1528895646.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:07.007Z,1528895647.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:07.025Z,1528895647.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:07.400Z,1528895647.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:07.436Z,1528895647.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:07.811Z,1528895647.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:07.829Z,1528895647.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:08.215Z,1528895648.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:08.233Z,1528895648.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:08.611Z,1528895648.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:08.629Z,1528895648.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:09.004Z,1528895649.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:09.031Z,1528895649.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:09.403Z,1528895649.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:09.422Z,1528895649.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:09.799Z,1528895649.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:09.825Z,1528895649.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:10.207Z,1528895650.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:10.226Z,1528895650.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:10.615Z,1528895650.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:10.634Z,1528895650.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:11.014Z,1528895651.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:11.033Z,1528895651.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:11.415Z,1528895651.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:11.433Z,1528895651.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:11.803Z,1528895651.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:11.820Z,1528895651.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:12.200Z,1528895652.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:12.228Z,1528895652.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:12.603Z,1528895652.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:12.626Z,1528895652.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:13.008Z,1528895653.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:13.025Z,1528895653.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:13.399Z,1528895653.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:13.423Z,1528895653.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:13.814Z,1528895653.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:13.832Z,1528895653.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:14.217Z,1528895654.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:14.234Z,1528895654.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:14.611Z,1528895654.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:14.636Z,1528895654.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:15.006Z,1528895655.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:15.023Z,1528895655.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:15.405Z,1528895655.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:15.423Z,1528895655.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:15.798Z,1528895655.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:15.836Z,1528895655.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:16.206Z,1528895656.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:16.224Z,1528895656.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:16.616Z,1528895656.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:16.634Z,1528895656.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:17.016Z,1528895657.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:17.040Z,1528895657.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:17.416Z,1528895657.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:17.433Z,1528895657.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:17.806Z,1528895657.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:17.824Z,1528895657.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:18.195Z,1528895658.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:18.232Z,1528895658.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:18.603Z,1528895658.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:18.637Z,1528895658.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:18.996Z,1528895658.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:19.032Z,1528895659.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:19.395Z,1528895659.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:19.437Z,1528895659.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:19.817Z,1528895659.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:19.834Z,1528895659.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:20.221Z,1528895660.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:20.238Z,1528895660.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:20.612Z,1528895660.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:20.630Z,1528895660.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:20.999Z,1528895660.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:21.038Z,1528895661.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:21.396Z,1528895661.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:21.429Z,1528895661.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:21.801Z,1528895661.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:21.829Z,1528895661.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:22.199Z,1528895662.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:22.235Z,1528895662.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:22.621Z,1528895662.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:22.639Z,1528895662.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:23.020Z,1528895663.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:23.038Z,1528895663.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:23.416Z,1528895663.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:23.434Z,1528895663.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:23.796Z,1528895663.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:23.826Z,1528895663.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:24.200Z,1528895664.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:24.227Z,1528895664.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:24.617Z,1528895664.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:24.635Z,1528895664.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:25.017Z,1528895665.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:25.040Z,1528895665.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:25.417Z,1528895665.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:25.434Z,1528895665.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:25.800Z,1528895665.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:25.836Z,1528895665.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:26.195Z,1528895666.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:26.234Z,1528895666.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:26.621Z,1528895666.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:26.639Z,1528895666.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:27.018Z,1528895667.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:27.049Z,1528895667.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:27.418Z,1528895667.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:27.453Z,1528895667.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:27.800Z,1528895667.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:27.830Z,1528895667.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:28.199Z,1528895668.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:28.231Z,1528895668.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:28.622Z,1528895668.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:28.640Z,1528895668.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:29.020Z,1528895669.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:29.038Z,1528895669.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:29.424Z,1528895669.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:29.442Z,1528895669.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:29.801Z,1528895669.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:29.830Z,1528895669.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:30.200Z,1528895670.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:30.238Z,1528895670.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:30.610Z,1528895670.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:30.649Z,1528895670.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:31.010Z,1528895671.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:31.039Z,1528895671.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:31.414Z,1528895671.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:31.452Z,1528895671.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:31.800Z,1528895671.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:31.840Z,1528895671.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:32.204Z,1528895672.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:32.222Z,1528895672.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:32.614Z,1528895672.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:32.648Z,1528895672.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:33.014Z,1528895673.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:33.046Z,1528895673.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:33.414Z,1528895673.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:33.448Z,1528895673.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:33.803Z,1528895673.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:33.820Z,1528895673.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:34.203Z,1528895674.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:34.221Z,1528895674.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:34.614Z,1528895674.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:34.652Z,1528895674.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:35.014Z,1528895675.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:35.046Z,1528895675.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:35.411Z,1528895675.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:35.449Z,1528895675.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:35.803Z,1528895675.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:35.821Z,1528895675.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:36.203Z,1528895676.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:36.228Z,1528895676.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:36.614Z,1528895676.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:36.652Z,1528895676.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:37.014Z,1528895677.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:37.036Z,1528895677.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:37.410Z,1528895677.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:37.429Z,1528895677.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:37.804Z,1528895677.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:37.828Z,1528895677.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:38.205Z,1528895678.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:38.234Z,1528895678.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:38.617Z,1528895678.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:38.635Z,1528895678.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:39.018Z,1528895679.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:39.040Z,1528895679.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:39.418Z,1528895679.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:39.441Z,1528895679.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:39.800Z,1528895679.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:39.827Z,1528895679.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:40.199Z,1528895680.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:40.228Z,1528895680.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:40.618Z,1528895680.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:40.642Z,1528895680.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:41.020Z,1528895681.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:41.038Z,1528895681.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:41.416Z,1528895681.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:41.434Z,1528895681.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:41.809Z,1528895681.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:41.826Z,1528895681.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:42.200Z,1528895682.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:42.228Z,1528895682.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:42.616Z,1528895682.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:42.634Z,1528895682.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:43.022Z,1528895683.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:43.040Z,1528895683.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:43.417Z,1528895683.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:43.435Z,1528895683.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:43.799Z,1528895683.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:43.835Z,1528895683.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:44.200Z,1528895684.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:44.229Z,1528895684.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:44.614Z,1528895684.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:44.644Z,1528895684.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:45.024Z,1528895685.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:45.042Z,1528895685.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:45.418Z,1528895685.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:45.443Z,1528895685.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:45.801Z,1528895685.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:45.829Z,1528895685.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:46.200Z,1528895686.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:46.228Z,1528895686.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:46.621Z,1528895686.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:46.644Z,1528895686.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:47.016Z,1528895687.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:47.039Z,1528895687.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:47.417Z,1528895687.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:47.435Z,1528895687.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:47.813Z,1528895687.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:47.839Z,1528895687.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:48.195Z,1528895688.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:48.237Z,1528895688.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:48.617Z,1528895688.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:48.635Z,1528895688.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:49.018Z,1528895689.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:49.044Z,1528895689.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:49.410Z,1528895689.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:49.435Z,1528895689.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:49.800Z,1528895689.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:49.838Z,1528895689.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:50.200Z,1528895690.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:50.234Z,1528895690.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:50.606Z,1528895690.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:50.640Z,1528895690.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:51.018Z,1528895691.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:51.042Z,1528895691.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:51.418Z,1528895691.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:51.444Z,1528895691.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:51.800Z,1528895691.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:51.838Z,1528895691.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:52.199Z,1528895692.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:52.226Z,1528895692.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:52.614Z,1528895692.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:52.643Z,1528895692.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:53.014Z,1528895693.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:53.041Z,1528895693.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:53.410Z,1528895693.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:53.443Z,1528895693.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:53.805Z,1528895693.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:53.842Z,1528895693.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:54.196Z,1528895694.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:54.215Z,1528895694.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:54.617Z,1528895694.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:54.654Z,1528895694.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:55.014Z,1528895695.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:55.051Z,1528895695.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:55.410Z,1528895695.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:55.428Z,1528895695.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:55.803Z,1528895695.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:55.820Z,1528895695.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:56.203Z,1528895696.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:56.221Z,1528895696.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:56.611Z,1528895696.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:56.629Z,1528895696.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:57.014Z,1528895697.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:57.032Z,1528895697.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:57.414Z,1528895697.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:57.455Z,1528895697.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:57.806Z,1528895697.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:57.828Z,1528895697.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:58.205Z,1528895698.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:58.223Z,1528895698.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:58.614Z,1528895698.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:58.649Z,1528895698.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:59.014Z,1528895699.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:59.036Z,1528895699.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:59.414Z,1528895699.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:59.436Z,1528895699.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:14:59.806Z,1528895699.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:14:59.824Z,1528895699.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:00.208Z,1528895700.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:00.228Z,1528895700.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:00.605Z,1528895700.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:00.623Z,1528895700.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:03.717Z,1528895703.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:03.735Z,1528895703.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:03.881Z,1528895703.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:03.926Z,1528895703.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:04.291Z,1528895704.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:04.309Z,1528895704.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:04.676Z,1528895704.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:04.713Z,1528895704.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:05.072Z,1528895705.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:05.110Z,1528895705.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:05.471Z,1528895705.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:05.488Z,1528895705.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:05.886Z,1528895705.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:05.914Z,1528895705.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:06.285Z,1528895706.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:06.312Z,1528895706.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:06.681Z,1528895706.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:06.715Z,1528895706.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:07.071Z,1528895707.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:07.090Z,1528895707.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:07.472Z,1528895707.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:07.492Z,1528895707.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:07.874Z,1528895707.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:07.892Z,1528895707.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:08.271Z,1528895708.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:08.289Z,1528895708.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:08.686Z,1528895708.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:08.719Z,1528895708.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:09.086Z,1528895709.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:09.118Z,1528895709.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:09.486Z,1528895709.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:09.519Z,1528895709.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:09.875Z,1528895709.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:09.892Z,1528895709.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:10.274Z,1528895710.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:10.292Z,1528895710.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:10.685Z,1528895710.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:10.720Z,1528895710.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:11.085Z,1528895711.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:11.118Z,1528895711.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:11.486Z,1528895711.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:11.518Z,1528895711.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:11.875Z,1528895711.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:11.894Z,1528895711.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:12.270Z,1528895712.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:12.288Z,1528895712.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:12.685Z,1528895712.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:12.719Z,1528895712.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:13.085Z,1528895713.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:13.127Z,1528895713.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:13.486Z,1528895713.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:13.504Z,1528895713.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:13.877Z,1528895713.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:13.895Z,1528895713.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:14.279Z,1528895714.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:14.297Z,1528895714.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:14.677Z,1528895714.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:14.695Z,1528895714.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:15.085Z,1528895715.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:15.103Z,1528895715.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:15.490Z,1528895715.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:15.524Z,1528895715.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:15.878Z,1528895715.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:15.896Z,1528895715.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:16.274Z,1528895716.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:16.314Z,1528895716.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:16.686Z,1528895716.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:16.704Z,1528895716.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:17.086Z,1528895717.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:17.108Z,1528895717.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:17.482Z,1528895717.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:17.500Z,1528895717.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:17.876Z,1528895717.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:17.913Z,1528895717.913 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:17.914Z,1528895717.914 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 196
2018-06-13T13:15:17.914Z,1528895717.914 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:15:17.918Z,1528895717.918 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:17.918Z,1528895717.918 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 196
2018-06-13T13:15:17.918Z,1528895717.918 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:15:17.920Z,1528895717.920 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:17.920Z,1528895717.920 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 196
2018-06-13T13:15:17.920Z,1528895717.920 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:15:18.001Z,1528895718.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:15:18.001Z,1528895718.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:15:18.001Z,1528895718.001 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:15:18.274Z,1528895718.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:18.389Z,1528895718.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:15:18.389Z,1528895718.389 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 196
2018-06-13T13:15:18.390Z,1528895718.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:15:18.390Z,1528895718.390 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 196
2018-06-13T13:15:18.390Z,1528895718.390 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:15:18.390Z,1528895718.390 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 196
2018-06-13T13:15:18.688Z,1528895718.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:18.705Z,1528895718.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:15:18.705Z,1528895718.705 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:15:18.705Z,1528895718.705 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:15:18.706Z,1528895718.706 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:15:18.706Z,1528895718.706 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:15:18.706Z,1528895718.706 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:15:18.707Z,1528895718.707 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:15:18.707Z,1528895718.707 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:15:18.708Z,1528895718.708 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:15:19.093Z,1528895719.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:19.111Z,1528895719.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:15:19.111Z,1528895719.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:19.488Z,1528895719.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:19.506Z,1528895719.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:15:19.506Z,1528895719.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:19.872Z,1528895719.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:19.906Z,1528895719.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:15:19.907Z,1528895719.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:20.271Z,1528895720.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:20.312Z,1528895720.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:15:20.318Z,1528895720.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:20.688Z,1528895720.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:20.706Z,1528895720.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:15:20.707Z,1528895720.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:21.082Z,1528895721.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:21.116Z,1528895721.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:15:21.117Z,1528895721.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:21.492Z,1528895721.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:21.510Z,1528895721.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:15:21.511Z,1528895721.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:21.872Z,1528895721.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:21.909Z,1528895721.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:15:21.910Z,1528895721.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:22.271Z,1528895722.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:22.288Z,1528895722.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:15:22.305Z,1528895722.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:22.685Z,1528895722.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:22.714Z,1528895722.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:15:22.715Z,1528895722.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:23.085Z,1528895723.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:23.120Z,1528895723.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:15:23.121Z,1528895723.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:23.481Z,1528895723.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:23.514Z,1528895723.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:15:23.515Z,1528895723.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:23.876Z,1528895723.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:23.909Z,1528895723.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:15:23.910Z,1528895723.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:24.275Z,1528895724.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:24.316Z,1528895724.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:15:24.321Z,1528895724.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:24.685Z,1528895724.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:24.721Z,1528895724.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:15:24.722Z,1528895724.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:25.085Z,1528895725.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:25.124Z,1528895725.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:15:25.125Z,1528895725.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:25.481Z,1528895725.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:25.520Z,1528895725.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:15:25.525Z,1528895725.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:25.875Z,1528895725.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:25.893Z,1528895725.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:15:25.894Z,1528895725.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:26.274Z,1528895726.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:26.292Z,1528895726.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:15:26.293Z,1528895726.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:26.677Z,1528895726.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:26.695Z,1528895726.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:15:26.696Z,1528895726.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:27.085Z,1528895727.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:27.103Z,1528895727.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:15:27.103Z,1528895727.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:27.486Z,1528895727.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:27.503Z,1528895727.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:15:27.504Z,1528895727.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:27.874Z,1528895727.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:27.892Z,1528895727.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:15:27.893Z,1528895727.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:28.278Z,1528895728.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:28.296Z,1528895728.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:15:28.297Z,1528895728.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:28.686Z,1528895728.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:28.703Z,1528895728.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:15:28.704Z,1528895728.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:29.082Z,1528895729.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:29.104Z,1528895729.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T13:15:29.105Z,1528895729.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:29.482Z,1528895729.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:29.499Z,1528895729.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T13:15:29.500Z,1528895729.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:29.876Z,1528895729.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:29.902Z,1528895729.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T13:15:29.903Z,1528895729.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:30.271Z,1528895730.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:30.295Z,1528895730.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T13:15:30.296Z,1528895730.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:30.683Z,1528895730.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:30.708Z,1528895730.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T13:15:30.725Z,1528895730.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:31.083Z,1528895731.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:31.101Z,1528895731.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T13:15:31.102Z,1528895731.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:31.484Z,1528895731.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:31.502Z,1528895731.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T13:15:31.503Z,1528895731.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:31.871Z,1528895731.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:31.904Z,1528895731.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T13:15:31.909Z,1528895731.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:32.275Z,1528895732.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:32.300Z,1528895732.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T13:15:32.301Z,1528895732.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:32.686Z,1528895732.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:32.708Z,1528895732.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T13:15:32.709Z,1528895732.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:33.087Z,1528895733.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:33.112Z,1528895733.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T13:15:33.113Z,1528895733.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:33.488Z,1528895733.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:33.512Z,1528895733.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T13:15:33.513Z,1528895733.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:33.868Z,1528895733.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:33.898Z,1528895733.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T13:15:33.899Z,1528895733.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:34.274Z,1528895734.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:34.298Z,1528895734.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T13:15:34.299Z,1528895734.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:34.691Z,1528895734.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:34.722Z,1528895734.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T13:15:34.723Z,1528895734.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:35.086Z,1528895735.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:35.112Z,1528895735.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T13:15:35.112Z,1528895735.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:35.492Z,1528895735.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:35.510Z,1528895735.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T13:15:35.511Z,1528895735.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:35.872Z,1528895735.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:35.908Z,1528895735.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T13:15:35.909Z,1528895735.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:36.271Z,1528895736.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:36.297Z,1528895736.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T13:15:36.298Z,1528895736.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:36.687Z,1528895736.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:36.706Z,1528895736.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T13:15:36.707Z,1528895736.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:37.092Z,1528895737.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:37.110Z,1528895737.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T13:15:37.111Z,1528895737.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:37.482Z,1528895737.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:37.506Z,1528895737.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T13:15:37.506Z,1528895737.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:37.872Z,1528895737.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:37.901Z,1528895737.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T13:15:37.902Z,1528895737.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:38.275Z,1528895738.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:38.312Z,1528895738.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:38.687Z,1528895738.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:38.712Z,1528895738.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:39.091Z,1528895739.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:39.109Z,1528895739.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:39.492Z,1528895739.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:39.511Z,1528895739.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:39.872Z,1528895739.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:39.903Z,1528895739.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:40.271Z,1528895740.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:40.310Z,1528895740.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:40.693Z,1528895740.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:40.711Z,1528895740.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:41.081Z,1528895741.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:41.115Z,1528895741.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:41.481Z,1528895741.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:41.509Z,1528895741.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:41.872Z,1528895741.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:41.902Z,1528895741.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:42.271Z,1528895742.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:42.305Z,1528895742.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:42.681Z,1528895742.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:42.719Z,1528895742.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:43.085Z,1528895743.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:43.119Z,1528895743.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:43.481Z,1528895743.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:43.515Z,1528895743.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:43.874Z,1528895743.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:43.896Z,1528895743.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:44.274Z,1528895744.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:44.292Z,1528895744.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:44.681Z,1528895744.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:44.699Z,1528895744.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:45.089Z,1528895745.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:45.122Z,1528895745.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:45.485Z,1528895745.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:45.519Z,1528895745.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:45.875Z,1528895745.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:45.892Z,1528895745.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:46.274Z,1528895746.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:46.291Z,1528895746.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:46.685Z,1528895746.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:46.703Z,1528895746.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:47.082Z,1528895747.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:47.100Z,1528895747.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:47.482Z,1528895747.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:47.499Z,1528895747.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:47.876Z,1528895747.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:47.906Z,1528895747.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:48.281Z,1528895748.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:48.299Z,1528895748.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:48.676Z,1528895748.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:48.694Z,1528895748.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:49.086Z,1528895749.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:49.104Z,1528895749.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:49.486Z,1528895749.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:49.503Z,1528895749.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:49.882Z,1528895749.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:49.900Z,1528895749.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:50.278Z,1528895750.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:50.296Z,1528895750.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:50.671Z,1528895750.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:50.694Z,1528895750.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:51.075Z,1528895751.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:51.107Z,1528895751.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:51.475Z,1528895751.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:51.508Z,1528895751.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:51.884Z,1528895751.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:51.902Z,1528895751.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:52.286Z,1528895752.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:52.304Z,1528895752.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:52.687Z,1528895752.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:52.712Z,1528895752.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:53.071Z,1528895753.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:53.095Z,1528895753.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:53.475Z,1528895753.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:53.506Z,1528895753.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:53.878Z,1528895753.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:53.910Z,1528895753.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:54.272Z,1528895754.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:54.298Z,1528895754.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:54.675Z,1528895754.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:54.699Z,1528895754.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:55.087Z,1528895755.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:55.105Z,1528895755.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:55.487Z,1528895755.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:55.504Z,1528895755.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:55.886Z,1528895755.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:55.905Z,1528895755.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:56.278Z,1528895756.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:56.296Z,1528895756.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:56.671Z,1528895756.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:56.696Z,1528895756.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:57.075Z,1528895757.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:57.099Z,1528895757.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:57.475Z,1528895757.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:57.501Z,1528895757.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:57.886Z,1528895757.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:57.905Z,1528895757.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:58.289Z,1528895758.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:58.312Z,1528895758.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:58.688Z,1528895758.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:58.707Z,1528895758.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:59.071Z,1528895759.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:59.094Z,1528895759.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:59.475Z,1528895759.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:59.498Z,1528895759.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:15:59.878Z,1528895759.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:15:59.896Z,1528895759.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:00.277Z,1528895760.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:00.295Z,1528895760.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:00.682Z,1528895760.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:00.703Z,1528895760.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:03.805Z,1528895763.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:03.834Z,1528895763.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:03.962Z,1528895763.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:04.005Z,1528895764.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:04.372Z,1528895764.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:04.390Z,1528895764.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:04.756Z,1528895764.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:04.790Z,1528895764.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:05.152Z,1528895765.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:05.189Z,1528895765.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:05.551Z,1528895765.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:05.584Z,1528895765.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:05.965Z,1528895765.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:06.007Z,1528895766.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:06.365Z,1528895766.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:06.396Z,1528895766.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:06.765Z,1528895766.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:06.801Z,1528895766.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:07.151Z,1528895767.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:07.181Z,1528895767.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:07.551Z,1528895767.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:07.592Z,1528895767.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:07.955Z,1528895767.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:07.973Z,1528895767.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:08.354Z,1528895768.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:08.372Z,1528895768.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:08.762Z,1528895768.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:08.780Z,1528895768.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:09.165Z,1528895769.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:09.183Z,1528895769.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:09.565Z,1528895769.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:09.583Z,1528895769.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:09.956Z,1528895769.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:09.974Z,1528895769.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:10.356Z,1528895770.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:10.374Z,1528895770.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:10.766Z,1528895770.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:10.784Z,1528895770.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:11.161Z,1528895771.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:11.179Z,1528895771.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:11.561Z,1528895771.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:11.579Z,1528895771.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:11.957Z,1528895771.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:11.980Z,1528895771.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:12.351Z,1528895772.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:12.373Z,1528895772.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:12.762Z,1528895772.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:12.779Z,1528895772.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:13.165Z,1528895773.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:13.183Z,1528895773.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:13.559Z,1528895773.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:13.577Z,1528895773.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:13.956Z,1528895773.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:13.976Z,1528895773.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:14.357Z,1528895774.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:14.375Z,1528895774.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:14.757Z,1528895774.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:14.775Z,1528895774.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:15.165Z,1528895775.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:15.183Z,1528895775.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:15.566Z,1528895775.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:15.584Z,1528895775.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:15.954Z,1528895775.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:15.971Z,1528895775.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:16.357Z,1528895776.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:16.375Z,1528895776.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:16.767Z,1528895776.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:16.788Z,1528895776.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:17.162Z,1528895777.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:17.184Z,1528895777.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:17.563Z,1528895777.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:17.588Z,1528895777.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:17.962Z,1528895777.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:17.980Z,1528895777.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:18.352Z,1528895778.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:18.378Z,1528895778.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:18.763Z,1528895778.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:18.781Z,1528895778.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:19.165Z,1528895779.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:19.183Z,1528895779.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:19.563Z,1528895779.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:19.580Z,1528895779.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:19.958Z,1528895779.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:19.976Z,1528895779.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:20.359Z,1528895780.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:20.377Z,1528895780.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:20.762Z,1528895780.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:20.780Z,1528895780.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:21.166Z,1528895781.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:21.184Z,1528895781.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:21.562Z,1528895781.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:21.581Z,1528895781.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:21.951Z,1528895781.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:21.975Z,1528895781.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:22.356Z,1528895782.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:22.375Z,1528895782.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:22.765Z,1528895782.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:22.783Z,1528895782.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:23.166Z,1528895783.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:23.183Z,1528895783.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:23.562Z,1528895783.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:23.580Z,1528895783.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:23.958Z,1528895783.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:23.975Z,1528895783.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:24.351Z,1528895784.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:24.374Z,1528895784.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:24.762Z,1528895784.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:24.784Z,1528895784.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:25.166Z,1528895785.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:25.183Z,1528895785.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:25.562Z,1528895785.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:25.580Z,1528895785.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:25.955Z,1528895785.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:25.986Z,1528895785.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:26.353Z,1528895786.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:26.371Z,1528895786.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:26.762Z,1528895786.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:26.784Z,1528895786.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:27.166Z,1528895787.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:27.184Z,1528895787.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:27.562Z,1528895787.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:27.580Z,1528895787.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:27.951Z,1528895787.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:27.975Z,1528895787.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:28.357Z,1528895788.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:28.374Z,1528895788.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:28.762Z,1528895788.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:28.780Z,1528895788.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:29.162Z,1528895789.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:29.185Z,1528895789.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:29.562Z,1528895789.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:29.584Z,1528895789.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:29.959Z,1528895789.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:29.984Z,1528895789.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:30.357Z,1528895790.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:30.374Z,1528895790.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:30.762Z,1528895790.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:30.784Z,1528895790.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:31.165Z,1528895791.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:31.182Z,1528895791.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:31.562Z,1528895791.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:31.579Z,1528895791.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:31.956Z,1528895791.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:31.990Z,1528895791.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:32.353Z,1528895792.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:32.376Z,1528895792.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:32.767Z,1528895792.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:32.784Z,1528895792.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:33.166Z,1528895793.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:33.188Z,1528895793.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:33.566Z,1528895793.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:33.588Z,1528895793.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:33.957Z,1528895793.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:33.976Z,1528895793.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:34.357Z,1528895794.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:34.374Z,1528895794.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:34.767Z,1528895794.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:34.792Z,1528895794.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:35.166Z,1528895795.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:35.188Z,1528895795.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:35.566Z,1528895795.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:35.583Z,1528895795.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:35.958Z,1528895795.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:35.975Z,1528895795.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:36.357Z,1528895796.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:36.374Z,1528895796.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:36.766Z,1528895796.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:36.784Z,1528895796.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:37.167Z,1528895797.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:37.192Z,1528895797.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:37.566Z,1528895797.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:37.588Z,1528895797.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:37.955Z,1528895797.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:37.986Z,1528895797.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:38.354Z,1528895798.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:38.372Z,1528895798.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:38.758Z,1528895798.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:38.776Z,1528895798.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:39.166Z,1528895799.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:39.184Z,1528895799.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:39.567Z,1528895799.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:39.592Z,1528895799.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:39.967Z,1528895799.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:39.984Z,1528895799.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:40.358Z,1528895800.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:40.375Z,1528895800.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:40.758Z,1528895800.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:40.776Z,1528895800.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:41.158Z,1528895801.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:41.180Z,1528895801.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:41.558Z,1528895801.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:41.580Z,1528895801.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:41.966Z,1528895801.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:41.995Z,1528895801.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:42.366Z,1528895802.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:42.384Z,1528895802.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:42.766Z,1528895802.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:42.784Z,1528895802.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:43.158Z,1528895803.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:43.176Z,1528895803.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:43.558Z,1528895803.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:43.576Z,1528895803.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:43.955Z,1528895803.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:43.978Z,1528895803.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:44.356Z,1528895804.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:44.389Z,1528895804.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:44.757Z,1528895804.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:44.775Z,1528895804.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:45.166Z,1528895805.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:45.184Z,1528895805.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:45.566Z,1528895805.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:45.588Z,1528895805.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:45.966Z,1528895805.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:45.988Z,1528895805.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:46.361Z,1528895806.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:46.379Z,1528895806.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:46.758Z,1528895806.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:46.775Z,1528895806.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:47.157Z,1528895807.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:47.175Z,1528895807.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:47.555Z,1528895807.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:47.578Z,1528895807.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:47.966Z,1528895807.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:47.984Z,1528895807.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:48.367Z,1528895808.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:48.384Z,1528895808.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:48.766Z,1528895808.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:48.783Z,1528895808.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:49.158Z,1528895809.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:49.176Z,1528895809.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:49.557Z,1528895809.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:49.575Z,1528895809.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:49.955Z,1528895809.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:49.978Z,1528895809.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:50.358Z,1528895810.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:50.376Z,1528895810.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:50.757Z,1528895810.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:50.775Z,1528895810.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:51.166Z,1528895811.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:51.184Z,1528895811.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:51.567Z,1528895811.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:51.584Z,1528895811.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:51.967Z,1528895811.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:51.984Z,1528895811.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:52.355Z,1528895812.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:52.378Z,1528895812.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:52.758Z,1528895812.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:52.781Z,1528895812.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:53.159Z,1528895813.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:53.177Z,1528895813.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:53.555Z,1528895813.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:53.578Z,1528895813.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:53.968Z,1528895813.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:53.992Z,1528895813.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:54.366Z,1528895814.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:54.388Z,1528895814.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:54.766Z,1528895814.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:54.784Z,1528895814.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:55.163Z,1528895815.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:55.182Z,1528895815.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:55.554Z,1528895815.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:55.571Z,1528895815.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:55.962Z,1528895815.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:55.980Z,1528895815.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:56.356Z,1528895816.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:56.386Z,1528895816.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:56.754Z,1528895816.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:56.772Z,1528895816.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:57.166Z,1528895817.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:57.184Z,1528895817.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:57.567Z,1528895817.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:57.592Z,1528895817.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:57.963Z,1528895817.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:57.981Z,1528895817.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:58.355Z,1528895818.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:58.387Z,1528895818.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:58.758Z,1528895818.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:58.776Z,1528895818.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:59.157Z,1528895819.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:59.176Z,1528895819.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:59.554Z,1528895819.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:59.578Z,1528895819.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:16:59.971Z,1528895819.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:16:59.990Z,1528895819.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:00.367Z,1528895820.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:00.386Z,1528895820.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:00.767Z,1528895820.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:00.785Z,1528895820.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:03.867Z,1528895823.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:03.885Z,1528895823.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:03.888Z,1528895823.888 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T13:12:00.9Z
2018-06-13T13:17:03.888Z,1528895823.888 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T13:17:03.888Z,1528895823.888 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T13:17:03.987Z,1528895823.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:04.039Z,1528895824.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:05.149Z,1528895825.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:05.177Z,1528895825.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:05.324Z,1528895825.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:05.366Z,1528895825.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:05.715Z,1528895825.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:05.733Z,1528895825.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:06.099Z,1528895826.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:06.127Z,1528895826.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:06.499Z,1528895826.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:06.527Z,1528895826.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:06.899Z,1528895826.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:06.926Z,1528895826.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:07.300Z,1528895827.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:07.328Z,1528895827.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:10.413Z,1528895830.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:10.431Z,1528895830.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:10.531Z,1528895830.531 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0228.lzma
2018-06-13T13:17:10.575Z,1528895830.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:10.620Z,1528895830.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:10.964Z,1528895830.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:10.982Z,1528895830.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:11.318Z,1528895831.318 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0228.lzma.bak
2018-06-13T13:17:11.318Z,1528895831.318 [DataOverHttps](INFO): SBD MOMSN=8329283
2018-06-13T13:17:11.376Z,1528895831.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:11.400Z,1528895831.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:13.252Z,1528895833.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:13.278Z,1528895833.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:13.389Z,1528895833.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:13.432Z,1528895833.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:13.810Z,1528895833.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:13.840Z,1528895833.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:14.221Z,1528895834.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:14.243Z,1528895834.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:14.617Z,1528895834.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:14.640Z,1528895834.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:17.738Z,1528895837.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:17.757Z,1528895837.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:17.900Z,1528895837.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:17.935Z,1528895837.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:18.320Z,1528895838.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:18.337Z,1528895838.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:18.724Z,1528895838.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:18.742Z,1528895838.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:19.110Z,1528895839.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:19.139Z,1528895839.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:19.503Z,1528895839.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:19.540Z,1528895839.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:19.903Z,1528895839.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:19.937Z,1528895839.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:20.300Z,1528895840.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:20.334Z,1528895840.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:20.703Z,1528895840.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:20.744Z,1528895840.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:21.124Z,1528895841.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:21.143Z,1528895841.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:21.523Z,1528895841.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:21.541Z,1528895841.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:21.910Z,1528895841.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:21.940Z,1528895841.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:22.302Z,1528895842.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:22.320Z,1528895842.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:22.702Z,1528895842.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:22.744Z,1528895842.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:23.105Z,1528895843.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:23.123Z,1528895843.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:23.503Z,1528895843.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:23.528Z,1528895843.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:23.919Z,1528895843.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:23.954Z,1528895843.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:27.040Z,1528895847.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:27.061Z,1528895847.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:27.153Z,1528895847.153 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0229.lzma
2018-06-13T13:17:27.202Z,1528895847.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:27.239Z,1528895847.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:27.579Z,1528895847.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:27.606Z,1528895847.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:27.954Z,1528895847.954 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0229.lzma.bak
2018-06-13T13:17:27.954Z,1528895847.954 [DataOverHttps](INFO): SBD MOMSN=8329285
2018-06-13T13:17:27.984Z,1528895847.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:28.020Z,1528895848.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:29.866Z,1528895849.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:29.908Z,1528895849.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:29.911Z,1528895849.911 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T13:17:29.912Z,1528895849.912 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T13:17:29.912Z,1528895849.912 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T13:17:30.023Z,1528895850.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:30.064Z,1528895850.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:33.154Z,1528895853.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:33.172Z,1528895853.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:33.312Z,1528895853.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:33.351Z,1528895853.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:33.703Z,1528895853.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:33.728Z,1528895853.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:34.095Z,1528895854.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:34.113Z,1528895854.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:34.479Z,1528895854.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:34.516Z,1528895854.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:34.899Z,1528895854.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:34.918Z,1528895854.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:35.304Z,1528895855.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:35.328Z,1528895855.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:35.699Z,1528895855.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:35.718Z,1528895855.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:36.084Z,1528895856.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:36.118Z,1528895856.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:36.479Z,1528895856.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:36.527Z,1528895856.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:36.904Z,1528895856.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:36.982Z,1528895856.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:37.304Z,1528895857.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:37.322Z,1528895857.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:37.700Z,1528895857.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:37.768Z,1528895857.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:38.101Z,1528895858.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:38.290Z,1528895858.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:38.479Z,1528895858.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:38.502Z,1528895858.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:38.902Z,1528895858.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:38.935Z,1528895858.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:39.298Z,1528895859.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:39.332Z,1528895859.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:39.697Z,1528895859.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:39.715Z,1528895859.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:40.090Z,1528895860.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:40.107Z,1528895860.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:40.488Z,1528895860.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:40.506Z,1528895860.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:40.893Z,1528895860.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:40.911Z,1528895860.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:41.311Z,1528895861.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:41.356Z,1528895861.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:41.694Z,1528895861.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:41.712Z,1528895861.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:42.089Z,1528895862.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:42.107Z,1528895862.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:42.485Z,1528895862.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:42.503Z,1528895862.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:42.897Z,1528895862.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:42.915Z,1528895862.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:43.301Z,1528895863.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:43.344Z,1528895863.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:43.697Z,1528895863.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:43.715Z,1528895863.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:44.090Z,1528895864.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:44.108Z,1528895864.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:44.487Z,1528895864.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:44.509Z,1528895864.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:44.897Z,1528895864.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:44.915Z,1528895864.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:45.297Z,1528895865.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:45.315Z,1528895865.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:45.694Z,1528895865.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:45.712Z,1528895865.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:46.090Z,1528895866.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:46.114Z,1528895866.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:46.489Z,1528895866.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:46.507Z,1528895866.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:46.894Z,1528895866.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:46.912Z,1528895866.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:47.297Z,1528895867.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:47.315Z,1528895867.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:47.694Z,1528895867.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:47.712Z,1528895867.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:48.087Z,1528895868.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:48.120Z,1528895868.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:48.494Z,1528895868.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:48.512Z,1528895868.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:48.898Z,1528895868.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:48.916Z,1528895868.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:49.297Z,1528895869.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:49.315Z,1528895869.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:49.697Z,1528895869.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:49.715Z,1528895869.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:50.090Z,1528895870.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:50.108Z,1528895870.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:50.487Z,1528895870.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:50.522Z,1528895870.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:50.900Z,1528895870.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:50.924Z,1528895870.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:51.299Z,1528895871.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:51.317Z,1528895871.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:51.698Z,1528895871.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:51.716Z,1528895871.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:52.090Z,1528895872.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:52.120Z,1528895872.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:52.482Z,1528895872.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:52.515Z,1528895872.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:52.898Z,1528895872.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:52.917Z,1528895872.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:53.301Z,1528895873.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:53.320Z,1528895873.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:53.699Z,1528895873.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:53.718Z,1528895873.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:54.087Z,1528895874.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:54.112Z,1528895874.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:54.483Z,1528895874.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:54.524Z,1528895874.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:54.899Z,1528895874.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:54.917Z,1528895874.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:55.303Z,1528895875.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:55.328Z,1528895875.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:55.703Z,1528895875.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:55.728Z,1528895875.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:56.080Z,1528895876.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:56.107Z,1528895876.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:56.483Z,1528895876.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:56.516Z,1528895876.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:56.904Z,1528895876.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:56.922Z,1528895876.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:57.299Z,1528895877.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:57.317Z,1528895877.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:57.700Z,1528895877.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:57.718Z,1528895877.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:58.084Z,1528895878.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:58.112Z,1528895878.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:58.479Z,1528895878.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:58.506Z,1528895878.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:58.900Z,1528895878.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:58.918Z,1528895878.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:59.304Z,1528895879.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:59.322Z,1528895879.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:17:59.699Z,1528895879.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:17:59.718Z,1528895879.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:00.094Z,1528895880.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:00.112Z,1528895880.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:00.483Z,1528895880.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:00.524Z,1528895880.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:00.899Z,1528895880.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:00.917Z,1528895880.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:01.303Z,1528895881.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:01.328Z,1528895881.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:01.704Z,1528895881.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:01.722Z,1528895881.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:02.084Z,1528895882.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:02.111Z,1528895882.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:02.483Z,1528895882.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:02.511Z,1528895882.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:02.904Z,1528895882.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:02.922Z,1528895882.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:03.304Z,1528895883.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:03.322Z,1528895883.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:03.699Z,1528895883.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:03.717Z,1528895883.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:04.083Z,1528895884.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:04.118Z,1528895884.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:04.484Z,1528895884.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:04.516Z,1528895884.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:04.883Z,1528895884.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:04.916Z,1528895884.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:05.305Z,1528895885.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:05.323Z,1528895885.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:05.700Z,1528895885.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:05.724Z,1528895885.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:06.099Z,1528895886.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:06.117Z,1528895886.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:06.483Z,1528895886.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:06.516Z,1528895886.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:06.883Z,1528895886.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:06.915Z,1528895886.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:07.284Z,1528895887.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:07.314Z,1528895887.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:07.683Z,1528895887.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:07.717Z,1528895887.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:08.100Z,1528895888.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:08.124Z,1528895888.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:08.502Z,1528895888.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:08.528Z,1528895888.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:08.905Z,1528895888.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:08.923Z,1528895888.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:09.279Z,1528895889.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:09.312Z,1528895889.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:09.687Z,1528895889.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:09.719Z,1528895889.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:10.084Z,1528895890.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:10.126Z,1528895890.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:10.484Z,1528895890.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:10.522Z,1528895890.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:10.883Z,1528895890.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:10.923Z,1528895890.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:11.297Z,1528895891.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:11.336Z,1528895891.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:11.694Z,1528895891.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:11.722Z,1528895891.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:12.095Z,1528895892.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:12.122Z,1528895892.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:12.483Z,1528895892.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:12.518Z,1528895892.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:12.879Z,1528895892.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:12.897Z,1528895892.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:13.284Z,1528895893.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:13.302Z,1528895893.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:13.683Z,1528895893.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:13.702Z,1528895893.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:14.065Z,1528895894.065 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T13:18:14.065Z,1528895894.065 [NAL9602] Data Fault, FailCount= 4
2018-06-13T13:18:14.065Z,1528895894.065 [NAL9602](ERROR): Data Fault
2018-06-13T13:18:14.082Z,1528895894.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:14.101Z,1528895894.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:14.198Z,1528895894.198 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T13:18:14.469Z,1528895894.469 [NAL9602](INFO): Powering down
2018-06-13T13:18:14.486Z,1528895894.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:14.508Z,1528895894.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:14.886Z,1528895894.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:14.904Z,1528895894.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:15.283Z,1528895895.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:15.301Z,1528895895.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:15.377Z,1528895895.377 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T13:18:15.377Z,1528895895.377 [NAL9602] No Fault, FailCount= 4
2018-06-13T13:18:15.686Z,1528895895.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:15.703Z,1528895895.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:16.084Z,1528895896.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:16.101Z,1528895896.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:16.485Z,1528895896.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:16.503Z,1528895896.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:16.886Z,1528895896.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:16.908Z,1528895896.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:17.285Z,1528895897.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:17.302Z,1528895897.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:17.686Z,1528895897.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:17.703Z,1528895897.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:18.086Z,1528895898.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:18.103Z,1528895898.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:18.485Z,1528895898.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:18.502Z,1528895898.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:18.878Z,1528895898.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:18.909Z,1528895898.909 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:18.909Z,1528895898.909 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 197
2018-06-13T13:18:18.909Z,1528895898.909 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:18:18.911Z,1528895898.911 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:18.911Z,1528895898.911 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 197
2018-06-13T13:18:18.911Z,1528895898.911 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:18:18.917Z,1528895898.917 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:18.918Z,1528895898.918 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 197
2018-06-13T13:18:18.918Z,1528895898.918 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:18:19.002Z,1528895899.002 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:18:19.002Z,1528895899.002 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:18:19.002Z,1528895899.002 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:18:19.282Z,1528895899.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:19.402Z,1528895899.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:18:19.402Z,1528895899.402 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 197
2018-06-13T13:18:19.403Z,1528895899.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:18:19.403Z,1528895899.403 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 197
2018-06-13T13:18:19.403Z,1528895899.403 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:18:19.403Z,1528895899.403 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 197
2018-06-13T13:18:19.681Z,1528895899.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:19.718Z,1528895899.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:18:19.719Z,1528895899.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:18:19.719Z,1528895899.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:18:19.719Z,1528895899.719 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:18:19.720Z,1528895899.720 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:18:19.720Z,1528895899.720 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:18:19.720Z,1528895899.720 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:18:19.721Z,1528895899.721 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:18:19.721Z,1528895899.721 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:18:20.078Z,1528895900.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:20.096Z,1528895900.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:18:20.097Z,1528895900.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:20.482Z,1528895900.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:20.504Z,1528895900.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:18:20.525Z,1528895900.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:20.886Z,1528895900.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:20.904Z,1528895900.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:18:20.905Z,1528895900.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:21.281Z,1528895901.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:21.299Z,1528895901.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:18:21.299Z,1528895901.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:21.686Z,1528895901.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:21.703Z,1528895901.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:18:21.704Z,1528895901.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:22.084Z,1528895902.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:22.101Z,1528895902.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:18:22.102Z,1528895902.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:22.486Z,1528895902.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:22.504Z,1528895902.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:18:22.504Z,1528895902.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:22.886Z,1528895902.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:22.903Z,1528895902.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:18:22.904Z,1528895902.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:23.285Z,1528895903.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:23.302Z,1528895903.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:18:23.303Z,1528895903.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:23.687Z,1528895903.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:23.704Z,1528895903.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:18:23.706Z,1528895903.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:24.086Z,1528895904.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:24.103Z,1528895904.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:18:24.104Z,1528895904.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:24.486Z,1528895904.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:24.503Z,1528895904.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:18:24.503Z,1528895904.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:24.885Z,1528895904.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:24.903Z,1528895904.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:18:24.903Z,1528895904.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:25.286Z,1528895905.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:25.303Z,1528895905.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:18:25.304Z,1528895905.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:25.685Z,1528895905.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:25.703Z,1528895905.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:18:25.704Z,1528895905.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:26.082Z,1528895906.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:26.100Z,1528895906.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:18:26.101Z,1528895906.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:26.486Z,1528895906.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:26.504Z,1528895906.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:18:26.505Z,1528895906.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:26.885Z,1528895906.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:26.902Z,1528895906.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:18:26.903Z,1528895906.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:27.283Z,1528895907.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:27.300Z,1528895907.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:18:27.301Z,1528895907.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:27.686Z,1528895907.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:27.708Z,1528895907.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:18:27.709Z,1528895907.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:28.085Z,1528895908.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:28.107Z,1528895908.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:18:28.108Z,1528895908.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:28.487Z,1528895908.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:28.504Z,1528895908.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:18:28.506Z,1528895908.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:28.889Z,1528895908.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:28.907Z,1528895908.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:18:28.907Z,1528895908.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:29.285Z,1528895909.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:29.307Z,1528895909.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:18:29.308Z,1528895909.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:29.688Z,1528895909.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:29.706Z,1528895909.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:18:29.707Z,1528895909.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:30.088Z,1528895910.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:30.106Z,1528895910.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T13:18:30.107Z,1528895910.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:30.488Z,1528895910.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:30.506Z,1528895910.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T13:18:30.507Z,1528895910.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:33.600Z,1528895913.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:33.638Z,1528895913.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T13:18:33.639Z,1528895913.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:33.758Z,1528895913.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:33.800Z,1528895913.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T13:18:33.801Z,1528895913.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:34.158Z,1528895914.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:34.191Z,1528895914.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T13:18:34.192Z,1528895914.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:34.555Z,1528895914.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:34.585Z,1528895914.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T13:18:34.586Z,1528895914.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:34.955Z,1528895914.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:34.972Z,1528895914.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T13:18:34.989Z,1528895914.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:35.351Z,1528895915.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:35.368Z,1528895915.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T13:18:35.368Z,1528895915.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:35.755Z,1528895915.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:35.773Z,1528895915.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T13:18:35.774Z,1528895915.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:36.155Z,1528895916.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:36.181Z,1528895916.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T13:18:36.182Z,1528895916.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:36.562Z,1528895916.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:36.579Z,1528895916.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T13:18:36.580Z,1528895916.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:36.957Z,1528895916.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:36.975Z,1528895916.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T13:18:36.976Z,1528895916.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:37.358Z,1528895917.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:37.383Z,1528895917.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T13:18:37.384Z,1528895917.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:37.760Z,1528895917.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:37.778Z,1528895917.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T13:18:37.779Z,1528895917.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:38.150Z,1528895918.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:38.188Z,1528895918.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T13:18:38.189Z,1528895918.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:38.558Z,1528895918.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:38.583Z,1528895918.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T13:18:38.583Z,1528895918.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:38.960Z,1528895918.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:38.978Z,1528895918.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:39.351Z,1528895919.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:39.379Z,1528895919.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:39.759Z,1528895919.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:39.777Z,1528895919.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:40.150Z,1528895920.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:40.178Z,1528895920.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:40.550Z,1528895920.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:40.586Z,1528895920.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:40.958Z,1528895920.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:40.981Z,1528895920.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:41.361Z,1528895921.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:41.379Z,1528895921.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:41.760Z,1528895921.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:41.778Z,1528895921.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:42.158Z,1528895922.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:42.181Z,1528895922.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:42.560Z,1528895922.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:42.577Z,1528895922.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:42.950Z,1528895922.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:42.986Z,1528895922.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:43.358Z,1528895923.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:43.383Z,1528895923.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:43.760Z,1528895923.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:43.778Z,1528895923.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:44.150Z,1528895924.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:44.178Z,1528895924.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:44.538Z,1528895924.538 [NAL9602](INFO): Powering up NAL9602
2018-06-13T13:18:44.562Z,1528895924.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:44.586Z,1528895924.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:44.960Z,1528895924.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:44.978Z,1528895924.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:45.350Z,1528895925.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:45.380Z,1528895925.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:45.753Z,1528895925.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:45.796Z,1528895925.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:46.155Z,1528895926.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:46.198Z,1528895926.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:46.550Z,1528895926.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:46.588Z,1528895926.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:46.953Z,1528895926.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:46.980Z,1528895926.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:47.354Z,1528895927.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:47.381Z,1528895927.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:47.754Z,1528895927.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:47.790Z,1528895927.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:48.155Z,1528895928.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:48.183Z,1528895928.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:48.554Z,1528895928.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:48.581Z,1528895928.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:48.950Z,1528895928.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:48.987Z,1528895928.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:49.358Z,1528895929.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:49.392Z,1528895929.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:49.750Z,1528895929.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:49.790Z,1528895929.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:50.150Z,1528895930.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:50.193Z,1528895930.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:50.555Z,1528895930.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:50.581Z,1528895930.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:50.958Z,1528895930.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:50.986Z,1528895930.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:51.350Z,1528895931.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:51.393Z,1528895931.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:51.754Z,1528895931.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:51.788Z,1528895931.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:52.154Z,1528895932.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:52.195Z,1528895932.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:52.550Z,1528895932.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:52.568Z,1528895932.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:52.955Z,1528895932.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:52.989Z,1528895932.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:53.354Z,1528895933.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:53.371Z,1528895933.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:53.754Z,1528895933.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:53.772Z,1528895933.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:54.155Z,1528895934.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:54.192Z,1528895934.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:54.558Z,1528895934.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:54.575Z,1528895934.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:54.968Z,1528895934.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:54.987Z,1528895934.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:55.338Z,1528895935.338 [NAL9602](INFO): NAL9602 initialized
2018-06-13T13:18:55.365Z,1528895935.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:55.383Z,1528895935.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:55.760Z,1528895935.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:55.779Z,1528895935.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:56.165Z,1528895936.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:56.183Z,1528895936.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:56.569Z,1528895936.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:56.587Z,1528895936.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:56.966Z,1528895936.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:56.983Z,1528895936.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:57.358Z,1528895937.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:57.376Z,1528895937.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:57.762Z,1528895937.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:57.780Z,1528895937.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:58.159Z,1528895938.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:58.177Z,1528895938.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:58.566Z,1528895938.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:58.584Z,1528895938.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:58.969Z,1528895938.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:58.987Z,1528895938.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:59.366Z,1528895939.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:59.384Z,1528895939.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:18:59.758Z,1528895939.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:18:59.777Z,1528895939.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:00.160Z,1528895940.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:00.184Z,1528895940.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:00.560Z,1528895940.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:00.591Z,1528895940.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:00.957Z,1528895940.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:00.975Z,1528895940.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:01.370Z,1528895941.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:01.388Z,1528895941.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:01.770Z,1528895941.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:01.789Z,1528895941.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:02.170Z,1528895942.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:02.188Z,1528895942.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:02.562Z,1528895942.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:02.579Z,1528895942.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:02.959Z,1528895942.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:02.982Z,1528895942.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:03.358Z,1528895943.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:03.376Z,1528895943.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:03.751Z,1528895943.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:03.790Z,1528895943.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:04.155Z,1528895944.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:04.183Z,1528895944.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:04.573Z,1528895944.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:04.591Z,1528895944.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:04.975Z,1528895944.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:04.993Z,1528895944.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:05.371Z,1528895945.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:05.389Z,1528895945.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:05.751Z,1528895945.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:05.788Z,1528895945.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:06.155Z,1528895946.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:06.182Z,1528895946.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:06.556Z,1528895946.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:06.584Z,1528895946.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:06.955Z,1528895946.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:06.983Z,1528895946.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:07.376Z,1528895947.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:07.401Z,1528895947.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:07.775Z,1528895947.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:07.793Z,1528895947.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:08.168Z,1528895948.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:08.194Z,1528895948.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:08.559Z,1528895948.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:08.586Z,1528895948.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:08.955Z,1528895948.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:08.988Z,1528895948.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:09.356Z,1528895949.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:09.394Z,1528895949.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:09.756Z,1528895949.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:09.789Z,1528895949.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:10.155Z,1528895950.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:10.172Z,1528895950.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:10.565Z,1528895950.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:10.599Z,1528895950.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:10.973Z,1528895950.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:11.006Z,1528895951.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:11.370Z,1528895951.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:11.411Z,1528895951.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:11.755Z,1528895951.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:11.772Z,1528895951.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:12.160Z,1528895952.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:12.198Z,1528895952.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:12.560Z,1528895952.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:12.586Z,1528895952.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:12.958Z,1528895952.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:12.976Z,1528895952.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:13.368Z,1528895953.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:13.387Z,1528895953.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:13.766Z,1528895953.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:13.784Z,1528895953.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:14.168Z,1528895954.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:14.186Z,1528895954.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:14.559Z,1528895954.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:14.596Z,1528895954.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:14.959Z,1528895954.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:14.989Z,1528895954.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:15.358Z,1528895955.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:15.376Z,1528895955.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:15.759Z,1528895955.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:15.783Z,1528895955.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:16.158Z,1528895956.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:16.175Z,1528895956.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:16.571Z,1528895956.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:16.589Z,1528895956.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:16.969Z,1528895956.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:16.988Z,1528895956.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:17.370Z,1528895957.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:17.393Z,1528895957.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:17.762Z,1528895957.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:17.779Z,1528895957.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:18.159Z,1528895958.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:18.182Z,1528895958.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:18.557Z,1528895958.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:18.575Z,1528895958.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:18.958Z,1528895958.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:18.976Z,1528895958.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:19.370Z,1528895959.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:19.392Z,1528895959.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:19.770Z,1528895959.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:19.792Z,1528895959.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:20.171Z,1528895960.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:20.188Z,1528895960.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:20.555Z,1528895960.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:20.591Z,1528895960.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:20.951Z,1528895960.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:20.979Z,1528895960.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:21.355Z,1528895961.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:21.384Z,1528895961.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:21.755Z,1528895961.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:21.791Z,1528895961.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:22.155Z,1528895962.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:22.188Z,1528895962.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:22.572Z,1528895962.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:22.590Z,1528895962.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:22.976Z,1528895962.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:23.000Z,1528895963.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:23.367Z,1528895963.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:23.384Z,1528895963.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:23.755Z,1528895963.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:23.793Z,1528895963.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:24.155Z,1528895964.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:24.188Z,1528895964.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:24.555Z,1528895964.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:24.589Z,1528895964.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:24.955Z,1528895964.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:24.973Z,1528895964.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:25.369Z,1528895965.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:25.400Z,1528895965.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:25.800Z,1528895965.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:26.191Z,1528895966.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:26.576Z,1528895966.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:26.958Z,1528895966.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:26.975Z,1528895966.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:27.358Z,1528895967.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:27.375Z,1528895967.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:27.758Z,1528895967.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:27.781Z,1528895967.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:28.157Z,1528895968.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:28.175Z,1528895968.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:28.573Z,1528895968.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:28.608Z,1528895968.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:28.969Z,1528895968.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:29.007Z,1528895969.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:29.369Z,1528895969.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:29.413Z,1528895969.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:29.758Z,1528895969.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:29.776Z,1528895969.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:30.162Z,1528895970.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:30.180Z,1528895970.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:30.561Z,1528895970.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:30.579Z,1528895970.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:33.664Z,1528895973.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:33.682Z,1528895973.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:33.830Z,1528895973.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:33.860Z,1528895973.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:34.230Z,1528895974.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:34.267Z,1528895974.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:34.629Z,1528895974.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:34.668Z,1528895974.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:35.013Z,1528895975.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:35.031Z,1528895975.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:35.414Z,1528895975.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:35.431Z,1528895975.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:35.815Z,1528895975.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:35.833Z,1528895975.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:36.215Z,1528895976.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:36.240Z,1528895976.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:36.625Z,1528895976.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:36.670Z,1528895976.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:37.028Z,1528895977.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:37.066Z,1528895977.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:37.422Z,1528895977.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:37.439Z,1528895977.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:37.816Z,1528895977.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:37.834Z,1528895977.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:38.219Z,1528895978.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:38.236Z,1528895978.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:38.616Z,1528895978.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:38.648Z,1528895978.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:39.015Z,1528895979.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:39.044Z,1528895979.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:39.425Z,1528895979.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:39.443Z,1528895979.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:39.826Z,1528895979.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:39.843Z,1528895979.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:40.246Z,1528895980.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:40.645Z,1528895980.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:41.039Z,1528895981.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:41.417Z,1528895981.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:41.450Z,1528895981.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:41.820Z,1528895981.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:41.838Z,1528895981.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:42.215Z,1528895982.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:42.247Z,1528895982.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:42.624Z,1528895982.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:42.641Z,1528895982.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:43.026Z,1528895983.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:43.044Z,1528895983.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:43.424Z,1528895983.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:43.442Z,1528895983.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:43.810Z,1528895983.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:43.836Z,1528895983.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:44.212Z,1528895984.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:44.242Z,1528895984.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:44.612Z,1528895984.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:44.640Z,1528895984.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:45.011Z,1528895985.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:45.039Z,1528895985.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:45.432Z,1528895985.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:45.450Z,1528895985.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:45.831Z,1528895985.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:45.850Z,1528895985.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:46.235Z,1528895986.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:46.254Z,1528895986.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:46.612Z,1528895986.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:46.640Z,1528895986.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:47.011Z,1528895987.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:47.047Z,1528895987.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:47.441Z,1528895987.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:47.847Z,1528895987.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:48.247Z,1528895988.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:48.629Z,1528895988.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:48.647Z,1528895988.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:49.033Z,1528895989.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:49.051Z,1528895989.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:49.428Z,1528895989.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:49.446Z,1528895989.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:49.811Z,1528895989.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:49.844Z,1528895989.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:50.212Z,1528895990.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:50.254Z,1528895990.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:50.612Z,1528895990.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:50.648Z,1528895990.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:51.011Z,1528895991.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:51.052Z,1528895991.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:51.437Z,1528895991.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:51.455Z,1528895991.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:51.830Z,1528895991.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:51.853Z,1528895991.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:52.222Z,1528895992.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:52.252Z,1528895992.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:52.612Z,1528895992.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:52.648Z,1528895992.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:53.012Z,1528895993.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:53.038Z,1528895993.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:53.411Z,1528895993.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:53.437Z,1528895993.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:53.813Z,1528895993.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:53.831Z,1528895993.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:54.215Z,1528895994.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:19:54.233Z,1528895994.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:54.663Z,1528895994.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:55.061Z,1528895995.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:55.459Z,1528895995.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:55.834Z,1528895995.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:56.240Z,1528895996.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:56.632Z,1528895996.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:57.038Z,1528895997.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:57.443Z,1528895997.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:57.843Z,1528895997.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:58.241Z,1528895998.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:58.634Z,1528895998.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:59.035Z,1528895999.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:59.435Z,1528895999.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:19:59.837Z,1528895999.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:00.235Z,1528896000.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:00.640Z,1528896000.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:01.039Z,1528896001.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:01.464Z,1528896001.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:01.839Z,1528896001.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:02.232Z,1528896002.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:02.644Z,1528896002.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:03.038Z,1528896003.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:03.439Z,1528896003.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:03.843Z,1528896003.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:04.239Z,1528896004.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:04.633Z,1528896004.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:05.034Z,1528896005.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:05.445Z,1528896005.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:05.837Z,1528896005.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:06.237Z,1528896006.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:06.645Z,1528896006.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:07.045Z,1528896007.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:07.445Z,1528896007.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:07.838Z,1528896007.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:08.236Z,1528896008.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:08.646Z,1528896008.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:09.034Z,1528896009.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:09.446Z,1528896009.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:09.848Z,1528896009.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:10.245Z,1528896010.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:10.635Z,1528896010.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:11.037Z,1528896011.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:11.446Z,1528896011.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:11.846Z,1528896011.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:12.247Z,1528896012.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:12.646Z,1528896012.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:13.050Z,1528896013.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:13.446Z,1528896013.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:13.843Z,1528896013.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:14.248Z,1528896014.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:14.638Z,1528896014.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:15.039Z,1528896015.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:15.446Z,1528896015.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:15.844Z,1528896015.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:16.252Z,1528896016.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:16.641Z,1528896016.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:17.046Z,1528896017.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:17.445Z,1528896017.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:17.841Z,1528896017.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:18.241Z,1528896018.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:18.656Z,1528896018.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:19.052Z,1528896019.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:19.454Z,1528896019.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:19.829Z,1528896019.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:20.229Z,1528896020.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:20.645Z,1528896020.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:21.034Z,1528896021.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:21.462Z,1528896021.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:21.861Z,1528896021.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:22.259Z,1528896022.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:22.632Z,1528896022.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:23.040Z,1528896023.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:23.433Z,1528896023.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:23.832Z,1528896023.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:24.233Z,1528896024.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:24.664Z,1528896024.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:25.044Z,1528896025.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:25.444Z,1528896025.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:25.835Z,1528896025.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:26.232Z,1528896026.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:26.642Z,1528896026.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:27.038Z,1528896027.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:27.445Z,1528896027.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:27.852Z,1528896027.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:28.245Z,1528896028.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:28.633Z,1528896028.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:29.035Z,1528896029.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:29.439Z,1528896029.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:29.832Z,1528896029.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:30.242Z,1528896030.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:30.647Z,1528896030.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:31.044Z,1528896031.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:31.447Z,1528896031.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:31.848Z,1528896031.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:32.237Z,1528896032.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:32.637Z,1528896032.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:33.040Z,1528896033.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:33.446Z,1528896033.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:33.847Z,1528896033.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:34.247Z,1528896034.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:37.346Z,1528896037.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:37.492Z,1528896037.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:37.893Z,1528896037.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:38.294Z,1528896038.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:38.690Z,1528896038.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:39.089Z,1528896039.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:39.478Z,1528896039.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:39.894Z,1528896039.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:40.296Z,1528896040.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:40.696Z,1528896040.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:41.100Z,1528896041.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:41.501Z,1528896041.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:41.884Z,1528896041.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:42.296Z,1528896042.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:42.674Z,1528896042.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:43.072Z,1528896043.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:43.503Z,1528896043.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:43.901Z,1528896043.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:44.300Z,1528896044.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:44.675Z,1528896044.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:45.076Z,1528896045.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:45.471Z,1528896045.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:45.880Z,1528896045.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:46.277Z,1528896046.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:46.699Z,1528896046.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:47.106Z,1528896047.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:47.483Z,1528896047.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:47.878Z,1528896047.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:48.279Z,1528896048.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:48.682Z,1528896048.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:49.078Z,1528896049.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:49.483Z,1528896049.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:49.887Z,1528896049.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:50.283Z,1528896050.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:50.678Z,1528896050.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:51.084Z,1528896051.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:51.478Z,1528896051.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:51.880Z,1528896051.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:52.278Z,1528896052.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:52.687Z,1528896052.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:53.087Z,1528896053.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:53.483Z,1528896053.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:53.879Z,1528896053.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:54.278Z,1528896054.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:54.678Z,1528896054.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:55.079Z,1528896055.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:55.483Z,1528896055.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:55.914Z,1528896055.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:56.284Z,1528896056.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:56.676Z,1528896056.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:57.078Z,1528896057.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:57.479Z,1528896057.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:57.880Z,1528896057.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:58.279Z,1528896058.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:58.686Z,1528896058.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:59.086Z,1528896059.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:59.488Z,1528896059.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:20:59.880Z,1528896059.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:00.279Z,1528896060.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:00.682Z,1528896060.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:01.079Z,1528896061.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:01.487Z,1528896061.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:01.887Z,1528896061.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:02.286Z,1528896062.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:02.682Z,1528896062.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:03.083Z,1528896063.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:03.477Z,1528896063.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:03.884Z,1528896063.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:04.284Z,1528896064.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:04.690Z,1528896064.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:05.095Z,1528896065.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:05.492Z,1528896065.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:05.886Z,1528896065.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:06.281Z,1528896066.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:06.694Z,1528896066.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:07.084Z,1528896067.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:07.496Z,1528896067.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:07.894Z,1528896067.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:08.294Z,1528896068.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:08.684Z,1528896068.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:09.094Z,1528896069.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:09.490Z,1528896069.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:09.890Z,1528896069.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:10.286Z,1528896070.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:10.694Z,1528896070.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:11.091Z,1528896071.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:11.490Z,1528896071.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:11.883Z,1528896071.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:12.284Z,1528896072.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:12.656Z,1528896072.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:21:12.696Z,1528896072.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:13.055Z,1528896073.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:21:13.085Z,1528896073.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:13.469Z,1528896073.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:21:13.505Z,1528896073.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:13.869Z,1528896073.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:21:13.904Z,1528896073.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:14.270Z,1528896074.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:21:14.298Z,1528896074.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:14.655Z,1528896074.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:21:14.689Z,1528896074.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:15.058Z,1528896075.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:21:15.076Z,1528896075.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:15.459Z,1528896075.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:21:15.477Z,1528896075.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:15.860Z,1528896075.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:21:15.877Z,1528896075.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:16.277Z,1528896076.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:16.684Z,1528896076.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:17.102Z,1528896077.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:17.503Z,1528896077.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:17.876Z,1528896077.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:18.280Z,1528896078.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:18.688Z,1528896078.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:19.080Z,1528896079.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:19.508Z,1528896079.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:19.912Z,1528896079.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:19.912Z,1528896079.912 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 198
2018-06-13T13:21:19.912Z,1528896079.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:21:19.918Z,1528896079.918 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:19.918Z,1528896079.918 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 198
2018-06-13T13:21:19.918Z,1528896079.918 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:21:19.920Z,1528896079.920 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:19.920Z,1528896079.920 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 198
2018-06-13T13:21:19.920Z,1528896079.920 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:21:20.014Z,1528896080.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:21:20.014Z,1528896080.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:21:20.014Z,1528896080.014 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:21:20.365Z,1528896080.365 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:21:20.365Z,1528896080.365 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 198
2018-06-13T13:21:20.366Z,1528896080.366 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:21:20.366Z,1528896080.366 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 198
2018-06-13T13:21:20.366Z,1528896080.366 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:21:20.366Z,1528896080.366 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 198
2018-06-13T13:21:20.683Z,1528896080.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:21:20.683Z,1528896080.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:21:20.684Z,1528896080.684 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:21:20.684Z,1528896080.684 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:21:20.684Z,1528896080.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:21:20.685Z,1528896080.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:21:20.685Z,1528896080.685 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:21:20.686Z,1528896080.686 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:21:20.686Z,1528896080.686 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:21:21.090Z,1528896081.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:21:21.091Z,1528896081.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:21.484Z,1528896081.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:21:21.485Z,1528896081.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:21.883Z,1528896081.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:21:21.884Z,1528896081.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:22.288Z,1528896082.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:21:22.289Z,1528896082.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:22.692Z,1528896082.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:21:22.693Z,1528896082.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:23.112Z,1528896083.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:21:23.113Z,1528896083.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:23.488Z,1528896083.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:21:23.489Z,1528896083.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:23.883Z,1528896083.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:21:23.884Z,1528896083.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:24.282Z,1528896084.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:21:24.283Z,1528896084.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:24.685Z,1528896084.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:21:24.686Z,1528896084.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:25.079Z,1528896085.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:21:25.080Z,1528896085.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:25.491Z,1528896085.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:21:25.492Z,1528896085.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:25.892Z,1528896085.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:21:25.892Z,1528896085.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:26.293Z,1528896086.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:21:26.294Z,1528896086.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:26.684Z,1528896086.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:21:26.685Z,1528896086.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:27.081Z,1528896087.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:21:27.082Z,1528896087.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:27.492Z,1528896087.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:21:27.493Z,1528896087.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:27.894Z,1528896087.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:21:27.895Z,1528896087.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:28.287Z,1528896088.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:21:28.288Z,1528896088.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:28.684Z,1528896088.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:21:28.685Z,1528896088.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:29.082Z,1528896089.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:21:29.083Z,1528896089.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:29.490Z,1528896089.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:21:29.490Z,1528896089.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:29.893Z,1528896089.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:21:29.894Z,1528896089.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:30.296Z,1528896090.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:21:30.297Z,1528896090.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:30.687Z,1528896090.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:21:30.688Z,1528896090.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:33.787Z,1528896093.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T13:21:33.788Z,1528896093.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:33.941Z,1528896093.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T13:21:33.942Z,1528896093.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:34.340Z,1528896094.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T13:21:34.341Z,1528896094.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:34.739Z,1528896094.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T13:21:34.740Z,1528896094.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:35.123Z,1528896095.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T13:21:35.124Z,1528896095.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:35.523Z,1528896095.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T13:21:35.524Z,1528896095.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:36.021Z,1528896096.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T13:21:36.022Z,1528896096.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:36.323Z,1528896096.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T13:21:36.324Z,1528896096.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:36.734Z,1528896096.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T13:21:36.734Z,1528896096.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:37.132Z,1528896097.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T13:21:37.133Z,1528896097.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:37.536Z,1528896097.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T13:21:37.537Z,1528896097.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:37.929Z,1528896097.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T13:21:37.930Z,1528896097.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:38.330Z,1528896098.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T13:21:38.331Z,1528896098.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:38.725Z,1528896098.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T13:21:38.726Z,1528896098.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:39.128Z,1528896099.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T13:21:39.129Z,1528896099.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:39.542Z,1528896099.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T13:21:39.542Z,1528896099.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:39.940Z,1528896099.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:40.336Z,1528896100.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:40.724Z,1528896100.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:41.128Z,1528896101.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:41.526Z,1528896101.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:41.926Z,1528896101.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:42.327Z,1528896102.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:42.736Z,1528896102.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:43.137Z,1528896103.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:43.534Z,1528896103.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:43.935Z,1528896103.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:44.330Z,1528896104.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:44.729Z,1528896104.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:45.124Z,1528896105.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:45.538Z,1528896105.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:45.940Z,1528896105.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:46.344Z,1528896106.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:46.730Z,1528896106.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:47.128Z,1528896107.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:47.529Z,1528896107.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:47.930Z,1528896107.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:48.335Z,1528896108.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:48.738Z,1528896108.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:49.138Z,1528896109.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:49.544Z,1528896109.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:49.926Z,1528896109.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:50.336Z,1528896110.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:50.728Z,1528896110.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:51.131Z,1528896111.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:51.548Z,1528896111.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:51.939Z,1528896111.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:52.347Z,1528896112.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:52.730Z,1528896112.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:53.136Z,1528896113.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:53.536Z,1528896113.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:53.938Z,1528896113.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:54.336Z,1528896114.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:54.727Z,1528896114.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:55.131Z,1528896115.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:55.535Z,1528896115.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:55.937Z,1528896115.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:56.344Z,1528896116.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:56.729Z,1528896116.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:57.136Z,1528896117.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:57.538Z,1528896117.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:57.941Z,1528896117.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:58.336Z,1528896118.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:58.738Z,1528896118.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:59.126Z,1528896119.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:59.538Z,1528896119.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:21:59.942Z,1528896119.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:00.336Z,1528896120.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:00.736Z,1528896120.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:01.137Z,1528896121.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:01.542Z,1528896121.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:01.942Z,1528896121.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:02.340Z,1528896122.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:02.734Z,1528896122.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:03.133Z,1528896123.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:03.542Z,1528896123.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:03.940Z,1528896123.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:04.339Z,1528896124.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:04.735Z,1528896124.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:05.140Z,1528896125.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:05.541Z,1528896125.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:05.935Z,1528896125.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:06.355Z,1528896126.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:06.739Z,1528896126.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:07.136Z,1528896127.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:07.537Z,1528896127.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:07.959Z,1528896127.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:08.356Z,1528896128.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:08.730Z,1528896128.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:09.129Z,1528896129.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:09.552Z,1528896129.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:09.960Z,1528896129.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:10.336Z,1528896130.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:10.729Z,1528896130.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:11.137Z,1528896131.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:11.550Z,1528896131.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:11.945Z,1528896131.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:12.344Z,1528896132.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:12.743Z,1528896132.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:13.112Z,1528896133.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:13.541Z,1528896133.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:13.943Z,1528896133.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:14.346Z,1528896134.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:14.740Z,1528896134.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:15.149Z,1528896135.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:15.549Z,1528896135.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:15.952Z,1528896135.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:16.352Z,1528896136.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:16.725Z,1528896136.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:17.124Z,1528896137.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:17.548Z,1528896137.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:17.954Z,1528896137.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:18.333Z,1528896138.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:18.726Z,1528896138.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:19.119Z,1528896139.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:19.527Z,1528896139.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:19.936Z,1528896139.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:20.332Z,1528896140.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:20.756Z,1528896140.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:21.123Z,1528896141.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:21.533Z,1528896141.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:21.935Z,1528896141.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:22.358Z,1528896142.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:22.724Z,1528896142.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:23.148Z,1528896143.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:23.533Z,1528896143.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:23.931Z,1528896143.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:24.332Z,1528896144.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:24.748Z,1528896144.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:25.124Z,1528896145.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:25.531Z,1528896145.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:25.931Z,1528896145.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:26.361Z,1528896146.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:26.730Z,1528896146.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:27.123Z,1528896147.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:27.531Z,1528896147.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:27.961Z,1528896147.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:28.336Z,1528896148.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:28.724Z,1528896148.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:29.123Z,1528896149.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:29.529Z,1528896149.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:29.937Z,1528896149.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:30.331Z,1528896150.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:30.334Z,1528896150.334 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T13:22:30.334Z,1528896150.334 [Default:CheckIn:C.Wait] Stopped
2018-06-13T13:22:30.334Z,1528896150.334 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T13:22:30.334Z,1528896150.334 [Default:CheckIn:D] Running Loop=1
2018-06-13T13:22:30.723Z,1528896150.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:30.727Z,1528896150.727 [Default:CheckIn:D] Stopped
2018-06-13T13:22:30.727Z,1528896150.727 [Default:CheckIn:E] Running Loop=1
2018-06-13T13:22:33.833Z,1528896153.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:33.836Z,1528896153.836 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 595.288021 min 
2018-06-13T13:22:33.836Z,1528896153.836 [Default:CheckIn:E] Stopped
2018-06-13T13:22:33.837Z,1528896153.837 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T13:22:33.837Z,1528896153.837 [Default:CheckIn] Stopped
2018-06-13T13:22:33.837Z,1528896153.837 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T13:22:33.837Z,1528896153.837 [Default:CheckIn](INFO): Running loop #58
2018-06-13T13:22:33.837Z,1528896153.837 [Default:CheckIn] Running Loop=58
2018-06-13T13:22:33.837Z,1528896153.837 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T13:22:33.838Z,1528896153.838 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T13:22:33.988Z,1528896153.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:34.384Z,1528896154.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:34.785Z,1528896154.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:35.181Z,1528896155.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:35.576Z,1528896155.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:35.964Z,1528896155.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:36.362Z,1528896156.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:36.800Z,1528896156.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:37.184Z,1528896157.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:37.590Z,1528896157.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:37.972Z,1528896157.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:38.390Z,1528896158.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:38.770Z,1528896158.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:39.166Z,1528896159.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:39.575Z,1528896159.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:39.994Z,1528896159.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:40.376Z,1528896160.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:40.766Z,1528896160.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:41.172Z,1528896161.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:41.606Z,1528896161.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:41.982Z,1528896161.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:42.384Z,1528896162.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:42.772Z,1528896162.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:43.178Z,1528896163.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:43.581Z,1528896163.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:43.981Z,1528896163.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:44.377Z,1528896164.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:44.783Z,1528896164.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:45.164Z,1528896165.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:45.580Z,1528896165.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:45.979Z,1528896165.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:46.403Z,1528896166.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:46.775Z,1528896166.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:47.175Z,1528896167.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:47.579Z,1528896167.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:48.005Z,1528896168.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:48.383Z,1528896168.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:48.786Z,1528896168.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:49.181Z,1528896169.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:49.573Z,1528896169.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:49.972Z,1528896169.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:50.390Z,1528896170.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:50.770Z,1528896170.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:51.166Z,1528896171.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:51.577Z,1528896171.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:51.982Z,1528896171.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:52.378Z,1528896172.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:52.766Z,1528896172.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:53.172Z,1528896173.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:53.577Z,1528896173.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:53.978Z,1528896173.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:54.373Z,1528896174.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:54.771Z,1528896174.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:55.171Z,1528896175.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:55.566Z,1528896175.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:55.974Z,1528896175.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:56.377Z,1528896176.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:56.773Z,1528896176.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:57.169Z,1528896177.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:57.570Z,1528896177.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:57.972Z,1528896177.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:58.371Z,1528896178.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:58.783Z,1528896178.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:59.178Z,1528896179.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:59.573Z,1528896179.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:22:59.970Z,1528896179.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:00.370Z,1528896180.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:00.775Z,1528896180.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:01.161Z,1528896181.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:01.573Z,1528896181.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:01.984Z,1528896181.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:02.375Z,1528896182.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:02.780Z,1528896182.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:03.172Z,1528896183.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:03.552Z,1528896183.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:03.958Z,1528896183.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:04.364Z,1528896184.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:04.791Z,1528896184.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:05.191Z,1528896185.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:05.571Z,1528896185.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:05.962Z,1528896185.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:06.363Z,1528896186.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:06.764Z,1528896186.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:07.160Z,1528896187.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:07.560Z,1528896187.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:07.973Z,1528896187.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:08.374Z,1528896188.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:08.776Z,1528896188.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:09.172Z,1528896189.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:09.564Z,1528896189.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:09.978Z,1528896189.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:10.375Z,1528896190.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:10.775Z,1528896190.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:11.177Z,1528896191.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:11.574Z,1528896191.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:11.971Z,1528896191.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:12.365Z,1528896192.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:12.766Z,1528896192.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:13.166Z,1528896193.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:13.566Z,1528896193.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:13.976Z,1528896193.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:14.374Z,1528896194.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:14.783Z,1528896194.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:15.175Z,1528896195.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:15.564Z,1528896195.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:15.977Z,1528896195.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:16.373Z,1528896196.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:16.779Z,1528896196.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:17.184Z,1528896197.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:17.584Z,1528896197.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:17.956Z,1528896197.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:18.361Z,1528896198.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:18.761Z,1528896198.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:19.156Z,1528896199.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:19.564Z,1528896199.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:19.987Z,1528896199.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:20.371Z,1528896200.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:20.771Z,1528896200.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:21.162Z,1528896201.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:21.562Z,1528896201.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:21.972Z,1528896201.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:22.363Z,1528896202.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:22.768Z,1528896202.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:23.171Z,1528896203.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:23.568Z,1528896203.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:23.960Z,1528896203.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:24.387Z,1528896204.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:24.787Z,1528896204.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:25.161Z,1528896205.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:25.564Z,1528896205.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:25.968Z,1528896205.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:26.368Z,1528896206.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:26.773Z,1528896206.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:27.161Z,1528896207.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:27.559Z,1528896207.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:27.986Z,1528896207.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:28.362Z,1528896208.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:28.767Z,1528896208.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:29.170Z,1528896209.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:29.572Z,1528896209.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:29.960Z,1528896209.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:30.362Z,1528896210.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:30.762Z,1528896210.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:33.878Z,1528896213.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:34.057Z,1528896214.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:34.454Z,1528896214.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:34.865Z,1528896214.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:35.231Z,1528896215.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:35.624Z,1528896215.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:36.025Z,1528896216.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:36.427Z,1528896216.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:36.832Z,1528896216.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:37.236Z,1528896217.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:37.632Z,1528896217.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:38.027Z,1528896218.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:38.423Z,1528896218.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:38.827Z,1528896218.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:39.230Z,1528896219.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:39.623Z,1528896219.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:40.032Z,1528896220.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:40.436Z,1528896220.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:40.832Z,1528896220.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:41.227Z,1528896221.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:41.636Z,1528896221.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:42.024Z,1528896222.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:42.428Z,1528896222.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:42.837Z,1528896222.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:43.237Z,1528896223.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:43.636Z,1528896223.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:44.026Z,1528896224.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:44.427Z,1528896224.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:44.825Z,1528896224.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:45.226Z,1528896225.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:45.632Z,1528896225.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:46.036Z,1528896226.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:46.444Z,1528896226.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:46.842Z,1528896226.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:47.228Z,1528896227.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:47.630Z,1528896227.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:48.030Z,1528896228.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:48.428Z,1528896228.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:48.837Z,1528896228.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:49.241Z,1528896229.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:49.637Z,1528896229.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:50.032Z,1528896230.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:50.438Z,1528896230.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:50.828Z,1528896230.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:51.236Z,1528896231.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:51.629Z,1528896231.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:52.037Z,1528896232.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:52.436Z,1528896232.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:52.839Z,1528896232.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:53.228Z,1528896233.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:53.638Z,1528896233.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:54.035Z,1528896234.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:54.430Z,1528896234.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:54.845Z,1528896234.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:55.243Z,1528896235.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:55.637Z,1528896235.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:56.036Z,1528896236.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:56.483Z,1528896236.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:56.834Z,1528896236.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:57.237Z,1528896237.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:57.639Z,1528896237.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:58.044Z,1528896238.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:58.442Z,1528896238.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:58.842Z,1528896238.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:59.230Z,1528896239.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:23:59.643Z,1528896239.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:00.042Z,1528896240.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:00.420Z,1528896240.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:00.848Z,1528896240.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:01.244Z,1528896241.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:01.646Z,1528896241.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:02.024Z,1528896242.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:02.425Z,1528896242.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:02.824Z,1528896242.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:03.224Z,1528896243.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:03.628Z,1528896243.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:04.035Z,1528896244.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:04.435Z,1528896244.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:04.835Z,1528896244.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:05.228Z,1528896245.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:05.639Z,1528896245.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:06.029Z,1528896246.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:06.430Z,1528896246.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:06.839Z,1528896246.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:07.235Z,1528896247.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:07.636Z,1528896247.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:08.049Z,1528896248.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:08.424Z,1528896248.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:08.829Z,1528896248.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:09.231Z,1528896249.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:09.624Z,1528896249.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:10.032Z,1528896250.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:10.436Z,1528896250.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:10.834Z,1528896250.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:11.227Z,1528896251.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:11.640Z,1528896251.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:12.027Z,1528896252.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:12.427Z,1528896252.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:12.833Z,1528896252.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:13.232Z,1528896253.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:13.635Z,1528896253.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:14.032Z,1528896254.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:14.427Z,1528896254.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:14.827Z,1528896254.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:15.234Z,1528896255.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:15.623Z,1528896255.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:16.032Z,1528896256.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:16.439Z,1528896256.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:16.832Z,1528896256.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:17.223Z,1528896257.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:17.630Z,1528896257.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:18.028Z,1528896258.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:18.430Z,1528896258.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:18.835Z,1528896258.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:19.236Z,1528896259.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:19.635Z,1528896259.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:20.028Z,1528896260.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:20.428Z,1528896260.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:20.828Z,1528896260.828 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:20.828Z,1528896260.828 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 199
2018-06-13T13:24:20.828Z,1528896260.828 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:24:20.830Z,1528896260.830 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:20.830Z,1528896260.830 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 199
2018-06-13T13:24:20.830Z,1528896260.830 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:24:20.832Z,1528896260.832 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:20.832Z,1528896260.832 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 199
2018-06-13T13:24:20.832Z,1528896260.832 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:24:20.910Z,1528896260.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:24:20.910Z,1528896260.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:24:20.910Z,1528896260.910 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:24:21.319Z,1528896261.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:24:21.319Z,1528896261.319 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 199
2018-06-13T13:24:21.320Z,1528896261.320 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:24:21.320Z,1528896261.320 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 199
2018-06-13T13:24:21.321Z,1528896261.321 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:24:21.321Z,1528896261.321 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 199
2018-06-13T13:24:21.623Z,1528896261.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:24:21.624Z,1528896261.624 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:24:21.624Z,1528896261.624 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:24:21.624Z,1528896261.624 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:24:21.629Z,1528896261.629 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:24:21.629Z,1528896261.629 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:24:21.630Z,1528896261.630 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:24:21.630Z,1528896261.630 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:24:21.630Z,1528896261.630 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:24:22.042Z,1528896262.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:24:22.043Z,1528896262.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:22.445Z,1528896262.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:24:22.446Z,1528896262.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:22.843Z,1528896262.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:24:22.844Z,1528896262.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:23.220Z,1528896263.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:24:23.221Z,1528896263.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:23.637Z,1528896263.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:24:23.638Z,1528896263.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:24.024Z,1528896264.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:24:24.025Z,1528896264.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:24.423Z,1528896264.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:24:24.424Z,1528896264.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:24.851Z,1528896264.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:24:24.852Z,1528896264.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:25.231Z,1528896265.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:24:25.232Z,1528896265.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:25.634Z,1528896265.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:24:25.635Z,1528896265.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:26.024Z,1528896266.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:24:26.025Z,1528896266.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:26.424Z,1528896266.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:24:26.425Z,1528896266.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:26.823Z,1528896266.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:24:26.824Z,1528896266.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:27.228Z,1528896267.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:24:27.230Z,1528896267.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:27.621Z,1528896267.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:24:27.622Z,1528896267.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:28.034Z,1528896268.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:24:28.035Z,1528896268.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:28.435Z,1528896268.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:24:28.435Z,1528896268.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:28.836Z,1528896268.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:24:28.853Z,1528896268.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:29.224Z,1528896269.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:24:29.226Z,1528896269.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:29.626Z,1528896269.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:24:29.627Z,1528896269.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:30.027Z,1528896270.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:24:30.028Z,1528896270.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:30.427Z,1528896270.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:24:30.428Z,1528896270.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:30.855Z,1528896270.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:24:30.856Z,1528896270.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:33.962Z,1528896273.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-06-13T13:24:33.963Z,1528896273.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:34.132Z,1528896274.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T13:24:34.133Z,1528896274.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:34.511Z,1528896274.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T13:24:34.512Z,1528896274.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:34.901Z,1528896274.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T13:24:34.902Z,1528896274.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:35.292Z,1528896275.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T13:24:35.309Z,1528896275.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:35.692Z,1528896275.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T13:24:35.693Z,1528896275.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:36.118Z,1528896276.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T13:24:36.119Z,1528896276.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:36.524Z,1528896276.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T13:24:36.530Z,1528896276.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:36.907Z,1528896276.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T13:24:36.908Z,1528896276.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:37.294Z,1528896277.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T13:24:37.295Z,1528896277.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:37.716Z,1528896277.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T13:24:37.716Z,1528896277.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:38.098Z,1528896278.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T13:24:38.099Z,1528896278.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:38.498Z,1528896278.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T13:24:38.499Z,1528896278.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:38.911Z,1528896278.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T13:24:38.911Z,1528896278.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:39.307Z,1528896279.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T13:24:39.308Z,1528896279.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:39.704Z,1528896279.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T13:24:39.705Z,1528896279.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:40.099Z,1528896280.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T13:24:40.100Z,1528896280.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:40.499Z,1528896280.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T13:24:40.499Z,1528896280.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:40.897Z,1528896280.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:41.299Z,1528896281.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:41.702Z,1528896281.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:42.105Z,1528896282.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:42.507Z,1528896282.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:42.910Z,1528896282.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:43.300Z,1528896283.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:43.701Z,1528896283.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:44.104Z,1528896284.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:44.495Z,1528896284.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:44.909Z,1528896284.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:45.308Z,1528896285.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:45.709Z,1528896285.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:46.100Z,1528896286.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:46.498Z,1528896286.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:46.895Z,1528896286.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:47.300Z,1528896287.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:47.699Z,1528896287.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:48.108Z,1528896288.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:48.508Z,1528896288.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:48.908Z,1528896288.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:49.295Z,1528896289.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:49.699Z,1528896289.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:50.105Z,1528896290.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:50.500Z,1528896290.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:50.909Z,1528896290.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:51.313Z,1528896291.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:51.710Z,1528896291.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:52.100Z,1528896292.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:52.510Z,1528896292.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:52.908Z,1528896292.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:53.305Z,1528896293.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:53.708Z,1528896293.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:54.111Z,1528896294.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:54.510Z,1528896294.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:54.910Z,1528896294.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:55.306Z,1528896295.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:55.711Z,1528896295.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:56.112Z,1528896296.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:56.498Z,1528896296.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:56.920Z,1528896296.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:57.325Z,1528896297.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:57.724Z,1528896297.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:58.116Z,1528896298.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:58.492Z,1528896298.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:58.892Z,1528896298.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:59.298Z,1528896299.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:24:59.696Z,1528896299.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:00.126Z,1528896300.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:00.507Z,1528896300.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:00.903Z,1528896300.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:01.296Z,1528896301.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:01.697Z,1528896301.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:02.102Z,1528896302.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:02.495Z,1528896302.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:02.903Z,1528896302.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:03.312Z,1528896303.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:03.707Z,1528896303.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:04.100Z,1528896304.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:04.498Z,1528896304.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:04.895Z,1528896304.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:05.299Z,1528896305.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:05.698Z,1528896305.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:06.105Z,1528896306.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:06.507Z,1528896306.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:06.908Z,1528896306.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:07.295Z,1528896307.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:07.699Z,1528896307.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:08.112Z,1528896308.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:08.495Z,1528896308.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:08.907Z,1528896308.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:09.307Z,1528896309.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:09.708Z,1528896309.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:10.098Z,1528896310.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:10.498Z,1528896310.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:10.896Z,1528896310.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:11.299Z,1528896311.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:11.698Z,1528896311.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:12.104Z,1528896312.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:12.507Z,1528896312.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:12.908Z,1528896312.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:13.299Z,1528896313.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:13.700Z,1528896313.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:14.111Z,1528896314.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:14.495Z,1528896314.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:14.909Z,1528896314.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:15.307Z,1528896315.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:15.704Z,1528896315.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:16.098Z,1528896316.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:16.509Z,1528896316.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:16.895Z,1528896316.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:17.299Z,1528896317.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:17.716Z,1528896317.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:18.110Z,1528896318.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:18.516Z,1528896318.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:18.916Z,1528896318.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:19.299Z,1528896319.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:19.700Z,1528896319.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:20.113Z,1528896320.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:20.505Z,1528896320.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:20.909Z,1528896320.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:21.314Z,1528896321.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:21.718Z,1528896321.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:22.101Z,1528896322.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:22.504Z,1528896322.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:22.903Z,1528896322.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:23.306Z,1528896323.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:23.703Z,1528896323.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:24.115Z,1528896324.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:24.520Z,1528896324.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:24.910Z,1528896324.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:25.313Z,1528896325.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:25.707Z,1528896325.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:26.109Z,1528896326.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:26.507Z,1528896326.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:26.910Z,1528896326.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:27.314Z,1528896327.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:27.712Z,1528896327.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:28.110Z,1528896328.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:28.508Z,1528896328.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:28.907Z,1528896328.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:29.307Z,1528896329.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:29.707Z,1528896329.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:30.118Z,1528896330.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:30.524Z,1528896330.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:30.913Z,1528896330.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:31.305Z,1528896331.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:31.707Z,1528896331.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:32.109Z,1528896332.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:32.505Z,1528896332.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:32.920Z,1528896332.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:33.314Z,1528896333.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:33.713Z,1528896333.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:34.108Z,1528896334.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:34.508Z,1528896334.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:37.609Z,1528896337.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:37.763Z,1528896337.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:38.163Z,1528896338.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:38.558Z,1528896338.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:38.967Z,1528896338.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:39.350Z,1528896339.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:39.753Z,1528896339.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:40.143Z,1528896340.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:40.540Z,1528896340.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:40.947Z,1528896340.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:41.347Z,1528896341.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:41.776Z,1528896341.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:42.142Z,1528896342.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:42.541Z,1528896342.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:42.942Z,1528896342.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:43.340Z,1528896343.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:43.742Z,1528896343.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:44.147Z,1528896344.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:44.548Z,1528896344.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:44.958Z,1528896344.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:45.338Z,1528896345.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:45.743Z,1528896345.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:46.143Z,1528896346.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:46.552Z,1528896346.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:46.954Z,1528896346.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:47.355Z,1528896347.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:47.752Z,1528896347.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:48.141Z,1528896348.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:48.543Z,1528896348.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:48.942Z,1528896348.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:49.342Z,1528896349.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:49.746Z,1528896349.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:50.153Z,1528896350.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:50.554Z,1528896350.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:50.955Z,1528896350.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:51.356Z,1528896351.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:51.746Z,1528896351.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:52.144Z,1528896352.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:52.546Z,1528896352.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:52.953Z,1528896352.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:53.356Z,1528896353.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:53.752Z,1528896353.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:54.144Z,1528896354.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:54.552Z,1528896354.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:54.941Z,1528896354.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:55.346Z,1528896355.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:55.744Z,1528896355.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:56.151Z,1528896356.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:56.554Z,1528896356.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:56.960Z,1528896356.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:57.346Z,1528896357.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:57.741Z,1528896357.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:58.145Z,1528896358.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:58.545Z,1528896358.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:58.957Z,1528896358.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:59.354Z,1528896359.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:25:59.752Z,1528896359.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:00.146Z,1528896360.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:00.544Z,1528896360.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:00.945Z,1528896360.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:01.347Z,1528896361.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:01.744Z,1528896361.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:02.153Z,1528896362.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:02.557Z,1528896362.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:02.953Z,1528896362.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:03.357Z,1528896363.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:03.746Z,1528896363.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:04.148Z,1528896364.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:04.546Z,1528896364.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:04.957Z,1528896364.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:05.356Z,1528896365.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:05.765Z,1528896365.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:06.149Z,1528896366.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:06.551Z,1528896366.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:06.947Z,1528896366.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:07.347Z,1528896367.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:07.745Z,1528896367.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:08.155Z,1528896368.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:08.564Z,1528896368.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:08.954Z,1528896368.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:09.356Z,1528896369.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:09.746Z,1528896369.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:10.144Z,1528896370.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:10.546Z,1528896370.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:10.958Z,1528896370.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:11.354Z,1528896371.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:11.753Z,1528896371.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:12.145Z,1528896372.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:12.544Z,1528896372.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:12.947Z,1528896372.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:13.346Z,1528896373.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:13.745Z,1528896373.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:14.161Z,1528896374.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:14.557Z,1528896374.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:14.952Z,1528896374.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:15.353Z,1528896375.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:15.750Z,1528896375.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:16.145Z,1528896376.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:16.556Z,1528896376.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:16.961Z,1528896376.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:17.357Z,1528896377.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:17.755Z,1528896377.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:18.151Z,1528896378.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:18.546Z,1528896378.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:18.953Z,1528896378.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:19.349Z,1528896379.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:19.751Z,1528896379.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:20.156Z,1528896380.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:20.557Z,1528896380.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:20.953Z,1528896380.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:21.358Z,1528896381.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:21.732Z,1528896381.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:22.153Z,1528896382.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:22.537Z,1528896382.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:22.971Z,1528896382.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:23.370Z,1528896383.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:23.751Z,1528896383.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:24.139Z,1528896384.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:24.543Z,1528896384.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:24.948Z,1528896384.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:25.341Z,1528896385.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:25.741Z,1528896385.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:26.147Z,1528896386.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:26.550Z,1528896386.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:26.947Z,1528896386.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:27.342Z,1528896387.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:27.739Z,1528896387.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:28.144Z,1528896388.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:28.542Z,1528896388.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:28.947Z,1528896388.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:29.356Z,1528896389.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:29.747Z,1528896389.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:30.141Z,1528896390.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:30.543Z,1528896390.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:30.955Z,1528896390.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:34.079Z,1528896394.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:34.253Z,1528896394.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:34.625Z,1528896394.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:35.012Z,1528896395.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:35.413Z,1528896395.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:35.812Z,1528896395.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:36.220Z,1528896396.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:36.639Z,1528896396.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:37.024Z,1528896397.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:37.413Z,1528896397.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:37.819Z,1528896397.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:38.217Z,1528896398.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:38.611Z,1528896398.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:39.020Z,1528896399.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:39.424Z,1528896399.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:39.824Z,1528896399.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:40.222Z,1528896400.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:40.620Z,1528896400.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:41.015Z,1528896401.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:41.415Z,1528896401.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:41.815Z,1528896401.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:42.220Z,1528896402.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:42.623Z,1528896402.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:43.017Z,1528896403.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:43.411Z,1528896403.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:43.814Z,1528896403.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:44.215Z,1528896404.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:44.612Z,1528896404.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:45.024Z,1528896405.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:45.424Z,1528896405.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:45.819Z,1528896405.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:46.219Z,1528896406.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:46.615Z,1528896406.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:47.013Z,1528896407.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:47.415Z,1528896407.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:47.815Z,1528896407.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:48.220Z,1528896408.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:48.623Z,1528896408.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:49.020Z,1528896409.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:49.412Z,1528896409.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:49.816Z,1528896409.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:50.222Z,1528896410.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:50.613Z,1528896410.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:51.024Z,1528896411.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:51.422Z,1528896411.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:51.821Z,1528896411.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:52.215Z,1528896412.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:52.615Z,1528896412.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:53.012Z,1528896413.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:53.412Z,1528896413.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:53.821Z,1528896413.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:54.219Z,1528896414.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:54.624Z,1528896414.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:55.020Z,1528896415.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:55.412Z,1528896415.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:55.820Z,1528896415.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:56.215Z,1528896416.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:56.612Z,1528896416.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:57.020Z,1528896417.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:57.424Z,1528896417.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:57.819Z,1528896417.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:58.214Z,1528896418.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:58.615Z,1528896418.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:59.012Z,1528896419.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:59.424Z,1528896419.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:26:59.814Z,1528896419.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:00.223Z,1528896420.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:00.623Z,1528896420.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:01.020Z,1528896421.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:01.414Z,1528896421.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:01.814Z,1528896421.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:02.222Z,1528896422.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:02.613Z,1528896422.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:03.020Z,1528896423.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:03.428Z,1528896423.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:03.822Z,1528896423.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:04.216Z,1528896424.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:04.622Z,1528896424.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:05.014Z,1528896425.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:05.428Z,1528896425.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:05.834Z,1528896425.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:06.230Z,1528896426.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:06.628Z,1528896426.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:07.026Z,1528896427.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:07.415Z,1528896427.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:07.816Z,1528896427.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:08.222Z,1528896428.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:08.614Z,1528896428.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:09.029Z,1528896429.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:09.430Z,1528896429.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:09.826Z,1528896429.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:10.216Z,1528896430.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:10.615Z,1528896430.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:11.025Z,1528896431.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:11.434Z,1528896431.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:11.825Z,1528896431.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:12.236Z,1528896432.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:12.632Z,1528896432.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:13.036Z,1528896433.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:13.409Z,1528896433.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:13.825Z,1528896433.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:14.220Z,1528896434.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:14.614Z,1528896434.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:15.024Z,1528896435.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:15.424Z,1528896435.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:15.819Z,1528896435.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:16.214Z,1528896436.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:16.620Z,1528896436.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:17.020Z,1528896437.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:17.423Z,1528896437.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:17.848Z,1528896437.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:18.216Z,1528896438.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:18.620Z,1528896438.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:19.020Z,1528896439.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:19.421Z,1528896439.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:19.823Z,1528896439.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:20.216Z,1528896440.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:20.612Z,1528896440.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:21.024Z,1528896441.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:21.424Z,1528896441.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:21.828Z,1528896441.828 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:21.828Z,1528896441.828 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 200
2018-06-13T13:27:21.828Z,1528896441.828 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:27:21.846Z,1528896441.846 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:21.846Z,1528896441.846 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 200
2018-06-13T13:27:21.846Z,1528896441.846 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:27:21.848Z,1528896441.848 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:21.848Z,1528896441.848 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 200
2018-06-13T13:27:21.848Z,1528896441.848 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:27:21.937Z,1528896441.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:27:21.937Z,1528896441.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:27:21.937Z,1528896441.937 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:27:22.293Z,1528896442.293 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:27:22.293Z,1528896442.293 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 200
2018-06-13T13:27:22.294Z,1528896442.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:27:22.294Z,1528896442.294 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 200
2018-06-13T13:27:22.294Z,1528896442.294 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:27:22.294Z,1528896442.294 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 200
2018-06-13T13:27:22.611Z,1528896442.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:27:22.611Z,1528896442.611 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:27:22.611Z,1528896442.611 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:27:22.612Z,1528896442.612 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:27:22.612Z,1528896442.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:27:22.612Z,1528896442.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:27:22.621Z,1528896442.621 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:27:22.621Z,1528896442.621 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:27:22.622Z,1528896442.622 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:27:23.025Z,1528896443.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:27:23.026Z,1528896443.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:23.427Z,1528896443.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:27:23.428Z,1528896443.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:23.826Z,1528896443.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:27:23.827Z,1528896443.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:24.220Z,1528896444.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:27:24.221Z,1528896444.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:24.618Z,1528896444.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:27:24.619Z,1528896444.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:25.025Z,1528896445.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:27:25.026Z,1528896445.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:25.425Z,1528896445.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:27:25.426Z,1528896445.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:25.825Z,1528896445.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:27:25.826Z,1528896445.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:26.225Z,1528896446.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:27:26.226Z,1528896446.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:26.623Z,1528896446.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:27:26.624Z,1528896446.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:27.029Z,1528896447.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:27:27.030Z,1528896447.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:27.430Z,1528896447.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:27:27.431Z,1528896447.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:27.836Z,1528896447.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:27:27.837Z,1528896447.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:28.218Z,1528896448.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:27:28.219Z,1528896448.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:28.620Z,1528896448.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:27:28.621Z,1528896448.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:29.040Z,1528896449.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:27:29.041Z,1528896449.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:29.436Z,1528896449.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:27:29.437Z,1528896449.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:29.826Z,1528896449.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:27:29.827Z,1528896449.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:30.228Z,1528896450.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:27:30.229Z,1528896450.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:30.631Z,1528896450.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:27:30.632Z,1528896450.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:31.031Z,1528896451.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:27:31.032Z,1528896451.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:34.136Z,1528896454.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T13:27:34.137Z,1528896454.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:34.140Z,1528896454.140 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T13:22:33.8Z
2018-06-13T13:27:34.140Z,1528896454.140 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T13:27:34.141Z,1528896454.141 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T13:27:34.320Z,1528896454.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T13:27:34.321Z,1528896454.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:35.432Z,1528896455.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T13:27:35.434Z,1528896455.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:35.573Z,1528896455.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T13:27:35.574Z,1528896455.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:35.977Z,1528896455.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T13:27:35.978Z,1528896455.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:36.381Z,1528896456.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T13:27:36.382Z,1528896456.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:39.628Z,1528896459.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T13:27:39.629Z,1528896459.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:39.721Z,1528896459.721 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0232.lzma
2018-06-13T13:27:39.788Z,1528896459.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T13:27:39.789Z,1528896459.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:40.172Z,1528896460.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T13:27:40.173Z,1528896460.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:40.522Z,1528896460.522 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0232.lzma.bak
2018-06-13T13:27:40.522Z,1528896460.522 [DataOverHttps](INFO): SBD MOMSN=8329296
2018-06-13T13:27:40.585Z,1528896460.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T13:27:40.586Z,1528896460.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:42.440Z,1528896462.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:42.624Z,1528896462.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:43.028Z,1528896463.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:43.428Z,1528896463.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:43.793Z,1528896463.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:46.938Z,1528896466.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:47.113Z,1528896467.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:47.519Z,1528896467.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:47.923Z,1528896467.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:48.319Z,1528896468.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:48.696Z,1528896468.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:49.092Z,1528896469.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:49.491Z,1528896469.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:49.893Z,1528896469.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:50.304Z,1528896470.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:50.703Z,1528896470.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:51.096Z,1528896471.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:51.492Z,1528896471.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:51.891Z,1528896471.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:52.296Z,1528896472.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:55.398Z,1528896475.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:55.483Z,1528896475.483 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0233.lzma
2018-06-13T13:27:55.572Z,1528896475.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:55.942Z,1528896475.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:56.282Z,1528896476.282 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0233.lzma.bak
2018-06-13T13:27:56.282Z,1528896476.282 [DataOverHttps](INFO): SBD MOMSN=8329298
2018-06-13T13:27:56.360Z,1528896476.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:58.220Z,1528896478.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:58.223Z,1528896478.223 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T13:27:58.223Z,1528896478.223 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T13:27:58.223Z,1528896478.223 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T13:27:58.380Z,1528896478.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:58.774Z,1528896478.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:59.170Z,1528896479.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:27:59.574Z,1528896479.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:02.684Z,1528896482.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:02.864Z,1528896482.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:03.263Z,1528896483.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:03.668Z,1528896483.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:04.057Z,1528896484.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:04.436Z,1528896484.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:04.838Z,1528896484.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:05.237Z,1528896485.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:05.636Z,1528896485.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:06.066Z,1528896486.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:06.467Z,1528896486.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:06.844Z,1528896486.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:07.239Z,1528896487.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:07.635Z,1528896487.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:08.045Z,1528896488.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:08.448Z,1528896488.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:08.848Z,1528896488.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:09.247Z,1528896489.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:09.635Z,1528896489.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:10.048Z,1528896490.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:10.439Z,1528896490.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:10.839Z,1528896490.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:11.252Z,1528896491.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:11.652Z,1528896491.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:12.050Z,1528896492.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:12.446Z,1528896492.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:12.844Z,1528896492.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:13.243Z,1528896493.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:13.646Z,1528896493.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:14.048Z,1528896494.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:14.448Z,1528896494.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:14.848Z,1528896494.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:15.249Z,1528896495.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:15.642Z,1528896495.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:16.046Z,1528896496.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:16.448Z,1528896496.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:16.848Z,1528896496.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:17.249Z,1528896497.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:17.653Z,1528896497.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:18.045Z,1528896498.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:18.446Z,1528896498.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:18.848Z,1528896498.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:19.247Z,1528896499.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:19.641Z,1528896499.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:20.044Z,1528896500.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:20.460Z,1528896500.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:20.860Z,1528896500.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:21.249Z,1528896501.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:21.655Z,1528896501.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:22.044Z,1528896502.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:22.441Z,1528896502.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:22.848Z,1528896502.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:23.250Z,1528896503.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:23.651Z,1528896503.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:24.060Z,1528896504.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:24.451Z,1528896504.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:24.851Z,1528896504.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:25.253Z,1528896505.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:25.654Z,1528896505.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:26.056Z,1528896506.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:26.461Z,1528896506.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:26.855Z,1528896506.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:27.250Z,1528896507.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:27.657Z,1528896507.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:28.053Z,1528896508.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:28.453Z,1528896508.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:28.858Z,1528896508.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:29.251Z,1528896509.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:29.660Z,1528896509.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:30.056Z,1528896510.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:30.452Z,1528896510.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:30.836Z,1528896510.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:31.233Z,1528896511.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:31.638Z,1528896511.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:32.035Z,1528896512.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:32.462Z,1528896512.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:32.860Z,1528896512.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:33.262Z,1528896513.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:33.636Z,1528896513.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:34.036Z,1528896514.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:34.437Z,1528896514.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:34.836Z,1528896514.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:35.264Z,1528896515.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:35.661Z,1528896515.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:36.062Z,1528896516.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:36.465Z,1528896516.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:36.835Z,1528896516.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:37.236Z,1528896517.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:37.640Z,1528896517.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:38.040Z,1528896518.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:38.458Z,1528896518.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:38.860Z,1528896518.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:39.260Z,1528896519.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:39.637Z,1528896519.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:40.036Z,1528896520.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:40.440Z,1528896520.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:40.837Z,1528896520.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:41.261Z,1528896521.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:41.719Z,1528896521.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:42.089Z,1528896522.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:42.521Z,1528896522.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:42.937Z,1528896522.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:43.368Z,1528896523.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:43.738Z,1528896523.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:44.037Z,1528896524.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:44.462Z,1528896524.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:44.861Z,1528896524.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:45.261Z,1528896525.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:45.637Z,1528896525.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:46.031Z,1528896526.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:46.440Z,1528896526.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:46.836Z,1528896526.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:47.243Z,1528896527.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:47.663Z,1528896527.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:48.047Z,1528896528.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:48.435Z,1528896528.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:48.838Z,1528896528.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:49.239Z,1528896529.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:49.636Z,1528896529.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:50.044Z,1528896530.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:50.447Z,1528896530.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:50.852Z,1528896530.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:51.243Z,1528896531.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:51.640Z,1528896531.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:52.044Z,1528896532.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:52.438Z,1528896532.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:52.839Z,1528896532.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:53.243Z,1528896533.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:53.652Z,1528896533.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:54.047Z,1528896534.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:54.438Z,1528896534.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:54.844Z,1528896534.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:55.248Z,1528896535.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:55.641Z,1528896535.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:56.052Z,1528896536.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:56.403Z,1528896536.403 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T13:28:56.403Z,1528896536.403 [NAL9602] Data Fault, FailCount= 5
2018-06-13T13:28:56.403Z,1528896536.403 [NAL9602](ERROR): Data Fault
2018-06-13T13:28:56.453Z,1528896536.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:56.549Z,1528896536.549 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T13:28:56.550Z,1528896536.550 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T13:28:56.794Z,1528896536.794 [NAL9602](INFO): Powering down
2018-06-13T13:28:56.841Z,1528896536.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:56.923Z,1528896536.923 [CBIT](INFO): Critical error at 20180613T132856
2018-06-13T13:28:57.238Z,1528896537.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:57.640Z,1528896537.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:58.037Z,1528896538.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:58.442Z,1528896538.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:28:58.840Z,1528896538.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:01.948Z,1528896541.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:02.124Z,1528896542.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:02.499Z,1528896542.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:02.896Z,1528896542.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:03.298Z,1528896543.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:03.694Z,1528896543.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:04.092Z,1528896544.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:04.500Z,1528896544.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:04.894Z,1528896544.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:05.293Z,1528896545.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:05.694Z,1528896545.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:06.094Z,1528896546.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:06.495Z,1528896546.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:06.894Z,1528896546.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:07.294Z,1528896547.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:07.693Z,1528896547.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:08.097Z,1528896548.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:08.497Z,1528896548.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:08.897Z,1528896548.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:09.301Z,1528896549.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:09.697Z,1528896549.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:10.093Z,1528896550.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:10.497Z,1528896550.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:10.896Z,1528896550.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:11.293Z,1528896551.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:11.697Z,1528896551.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:12.100Z,1528896552.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:12.493Z,1528896552.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:12.900Z,1528896552.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:13.302Z,1528896553.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:13.694Z,1528896553.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:14.098Z,1528896554.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:14.497Z,1528896554.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:14.893Z,1528896554.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:15.297Z,1528896555.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:15.701Z,1528896555.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:16.095Z,1528896556.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:16.494Z,1528896556.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:16.900Z,1528896556.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:17.294Z,1528896557.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:17.703Z,1528896557.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:18.099Z,1528896558.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:18.495Z,1528896558.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:18.904Z,1528896558.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:19.297Z,1528896559.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:19.695Z,1528896559.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:20.105Z,1528896560.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:20.504Z,1528896560.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:20.896Z,1528896560.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:21.297Z,1528896561.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:21.697Z,1528896561.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:22.095Z,1528896562.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:22.498Z,1528896562.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:22.897Z,1528896562.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:23.295Z,1528896563.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:23.700Z,1528896563.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:24.097Z,1528896564.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:24.498Z,1528896564.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:24.905Z,1528896564.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:25.305Z,1528896565.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:25.697Z,1528896565.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:26.099Z,1528896566.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:26.497Z,1528896566.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:26.899Z,1528896566.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:27.298Z,1528896567.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:27.699Z,1528896567.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:28.097Z,1528896568.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:28.498Z,1528896568.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:28.904Z,1528896568.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:29.304Z,1528896569.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:29.701Z,1528896569.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:30.108Z,1528896570.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:30.503Z,1528896570.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:30.910Z,1528896570.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:31.287Z,1528896571.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:31.687Z,1528896571.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:32.090Z,1528896572.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:32.492Z,1528896572.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:32.888Z,1528896572.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:33.296Z,1528896573.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:33.695Z,1528896573.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:34.089Z,1528896574.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:34.497Z,1528896574.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:34.894Z,1528896574.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:35.291Z,1528896575.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:35.695Z,1528896575.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:36.094Z,1528896576.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:36.491Z,1528896576.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:36.895Z,1528896576.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:37.294Z,1528896577.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:37.690Z,1528896577.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:38.094Z,1528896578.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:38.494Z,1528896578.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:38.894Z,1528896578.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:39.295Z,1528896579.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:39.694Z,1528896579.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:40.091Z,1528896580.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:40.495Z,1528896580.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:40.894Z,1528896580.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:41.291Z,1528896581.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:41.694Z,1528896581.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:42.095Z,1528896582.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:42.490Z,1528896582.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:42.894Z,1528896582.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:43.297Z,1528896583.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:43.690Z,1528896583.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:44.095Z,1528896584.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:44.494Z,1528896584.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:44.895Z,1528896584.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:45.294Z,1528896585.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:45.694Z,1528896585.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:46.091Z,1528896586.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:46.494Z,1528896586.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:46.894Z,1528896586.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:47.290Z,1528896587.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:47.694Z,1528896587.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:48.095Z,1528896588.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:48.490Z,1528896588.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:48.895Z,1528896588.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:49.295Z,1528896589.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:49.691Z,1528896589.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:50.095Z,1528896590.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:50.495Z,1528896590.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:50.891Z,1528896590.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:51.295Z,1528896591.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:51.700Z,1528896591.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:52.093Z,1528896592.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:52.503Z,1528896592.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:52.900Z,1528896592.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:53.293Z,1528896593.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:53.699Z,1528896593.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:54.096Z,1528896594.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:54.495Z,1528896594.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:54.896Z,1528896594.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:55.313Z,1528896595.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:55.693Z,1528896595.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:56.095Z,1528896596.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:56.504Z,1528896596.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:56.895Z,1528896596.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:57.295Z,1528896597.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:57.696Z,1528896597.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:58.092Z,1528896598.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:58.499Z,1528896598.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:29:58.895Z,1528896598.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:02.003Z,1528896602.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:02.184Z,1528896602.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:02.578Z,1528896602.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:02.977Z,1528896602.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:03.384Z,1528896603.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:03.780Z,1528896603.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:04.163Z,1528896604.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:04.568Z,1528896604.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:04.972Z,1528896604.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:05.366Z,1528896605.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:05.768Z,1528896605.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:06.167Z,1528896606.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:06.567Z,1528896606.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:06.967Z,1528896606.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:07.367Z,1528896607.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:07.767Z,1528896607.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:08.172Z,1528896608.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:08.568Z,1528896608.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:08.963Z,1528896608.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:09.372Z,1528896609.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:09.768Z,1528896609.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:10.163Z,1528896610.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:10.568Z,1528896610.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:10.968Z,1528896610.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:11.363Z,1528896611.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:11.772Z,1528896611.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:12.164Z,1528896612.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:12.564Z,1528896612.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:12.967Z,1528896612.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:13.364Z,1528896613.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:13.767Z,1528896613.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:14.168Z,1528896614.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:14.563Z,1528896614.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:14.964Z,1528896614.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:15.368Z,1528896615.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:15.767Z,1528896615.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:16.162Z,1528896616.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:16.567Z,1528896616.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:16.966Z,1528896616.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:17.363Z,1528896617.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:17.767Z,1528896617.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:18.162Z,1528896618.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:18.566Z,1528896618.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:18.967Z,1528896618.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:19.365Z,1528896619.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:19.766Z,1528896619.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:20.167Z,1528896620.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:20.564Z,1528896620.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:20.964Z,1528896620.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:21.367Z,1528896621.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:21.766Z,1528896621.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:22.172Z,1528896622.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:22.567Z,1528896622.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:22.964Z,1528896622.964 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:22.965Z,1528896622.965 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 201
2018-06-13T13:30:22.965Z,1528896622.965 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:30:22.966Z,1528896622.966 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:22.967Z,1528896622.967 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 201
2018-06-13T13:30:22.967Z,1528896622.967 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:30:22.968Z,1528896622.968 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:22.968Z,1528896622.968 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 201
2018-06-13T13:30:22.968Z,1528896622.968 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:30:23.061Z,1528896623.061 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:30:23.062Z,1528896623.062 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:30:23.062Z,1528896623.062 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:30:23.445Z,1528896623.445 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:30:23.445Z,1528896623.445 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 201
2018-06-13T13:30:23.446Z,1528896623.446 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:30:23.446Z,1528896623.446 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 201
2018-06-13T13:30:23.446Z,1528896623.446 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:30:23.446Z,1528896623.446 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 201
2018-06-13T13:30:23.771Z,1528896623.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:30:23.772Z,1528896623.772 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:30:23.772Z,1528896623.772 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:30:23.772Z,1528896623.772 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:30:23.773Z,1528896623.773 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:30:23.773Z,1528896623.773 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:30:23.774Z,1528896623.774 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:30:23.774Z,1528896623.774 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:30:23.774Z,1528896623.774 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:30:24.171Z,1528896624.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:30:24.172Z,1528896624.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:24.565Z,1528896624.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:30:24.566Z,1528896624.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:24.969Z,1528896624.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:30:24.970Z,1528896624.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:25.364Z,1528896625.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:30:25.365Z,1528896625.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:25.769Z,1528896625.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:30:25.770Z,1528896625.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:26.176Z,1528896626.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:30:26.177Z,1528896626.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:26.571Z,1528896626.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:30:26.572Z,1528896626.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:26.966Z,1528896626.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:30:26.967Z,1528896626.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:27.369Z,1528896627.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:30:27.370Z,1528896627.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:27.768Z,1528896627.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:30:27.769Z,1528896627.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:28.165Z,1528896628.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:30:28.166Z,1528896628.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:28.569Z,1528896628.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:30:28.570Z,1528896628.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:28.967Z,1528896628.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:30:28.968Z,1528896628.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:29.365Z,1528896629.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:30:29.366Z,1528896629.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:29.769Z,1528896629.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:30:29.770Z,1528896629.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:30.166Z,1528896630.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:30:30.167Z,1528896630.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:30.569Z,1528896630.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:30:30.570Z,1528896630.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:30.969Z,1528896630.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:30:30.970Z,1528896630.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:31.364Z,1528896631.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:30:31.365Z,1528896631.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:31.766Z,1528896631.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:30:31.767Z,1528896631.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:32.170Z,1528896632.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:30:32.171Z,1528896632.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:32.565Z,1528896632.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:30:32.566Z,1528896632.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:32.969Z,1528896632.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:30:32.970Z,1528896632.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:33.366Z,1528896633.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:30:33.367Z,1528896633.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:33.773Z,1528896633.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:30:33.774Z,1528896633.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:34.171Z,1528896634.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T13:30:34.172Z,1528896634.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:34.566Z,1528896634.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T13:30:34.567Z,1528896634.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:34.972Z,1528896634.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T13:30:34.973Z,1528896634.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:35.371Z,1528896635.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T13:30:35.372Z,1528896635.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:35.776Z,1528896635.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T13:30:35.777Z,1528896635.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:36.168Z,1528896636.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T13:30:36.169Z,1528896636.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:36.572Z,1528896636.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T13:30:36.573Z,1528896636.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:36.971Z,1528896636.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T13:30:36.972Z,1528896636.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:37.368Z,1528896637.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T13:30:37.369Z,1528896637.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:37.771Z,1528896637.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T13:30:37.772Z,1528896637.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:38.167Z,1528896638.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T13:30:38.168Z,1528896638.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:38.573Z,1528896638.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T13:30:38.574Z,1528896638.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:38.973Z,1528896638.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T13:30:38.974Z,1528896638.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:39.371Z,1528896639.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T13:30:39.372Z,1528896639.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:39.775Z,1528896639.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T13:30:39.776Z,1528896639.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:40.171Z,1528896640.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T13:30:40.172Z,1528896640.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:40.572Z,1528896640.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T13:30:40.572Z,1528896640.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:40.985Z,1528896640.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T13:30:40.986Z,1528896640.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:41.380Z,1528896641.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T13:30:41.385Z,1528896641.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:41.764Z,1528896641.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T13:30:41.773Z,1528896641.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:42.159Z,1528896642.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T13:30:42.160Z,1528896642.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:42.564Z,1528896642.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T13:30:42.566Z,1528896642.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:42.972Z,1528896642.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:43.363Z,1528896643.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:43.772Z,1528896643.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:44.167Z,1528896644.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:44.562Z,1528896644.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:44.972Z,1528896644.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:45.367Z,1528896645.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:45.766Z,1528896645.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:46.167Z,1528896646.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:46.567Z,1528896646.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:46.965Z,1528896646.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:47.369Z,1528896647.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:47.767Z,1528896647.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:48.166Z,1528896648.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:48.567Z,1528896648.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:48.967Z,1528896648.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:49.365Z,1528896649.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:49.767Z,1528896649.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:50.172Z,1528896650.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:50.571Z,1528896650.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:50.968Z,1528896650.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:51.367Z,1528896651.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:51.767Z,1528896651.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:52.166Z,1528896652.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:52.572Z,1528896652.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:52.972Z,1528896652.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:53.365Z,1528896653.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:53.772Z,1528896653.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:54.169Z,1528896654.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:54.566Z,1528896654.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:54.972Z,1528896654.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:55.366Z,1528896655.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:55.764Z,1528896655.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:56.167Z,1528896656.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:56.566Z,1528896656.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:56.649Z,1528896656.649 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T13:30:56.649Z,1528896656.649 [NAL9602] No Fault, FailCount= 5
2018-06-13T13:30:56.926Z,1528896656.926 [NAL9602](INFO): Powering up NAL9602
2018-06-13T13:30:56.971Z,1528896656.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:57.385Z,1528896657.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:57.774Z,1528896657.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:58.166Z,1528896658.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:58.575Z,1528896658.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:30:58.974Z,1528896658.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:02.084Z,1528896662.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:02.256Z,1528896662.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:02.631Z,1528896662.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:03.031Z,1528896663.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:03.428Z,1528896663.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:03.823Z,1528896663.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:04.224Z,1528896664.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:04.628Z,1528896664.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:05.027Z,1528896665.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:05.422Z,1528896665.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:05.828Z,1528896665.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:06.226Z,1528896666.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:06.622Z,1528896666.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:07.032Z,1528896667.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:07.432Z,1528896667.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:07.783Z,1528896667.783 [NAL9602](INFO): NAL9602 initialized
2018-06-13T13:31:07.830Z,1528896667.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:08.230Z,1528896668.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:08.640Z,1528896668.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:09.031Z,1528896669.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:09.435Z,1528896669.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:09.829Z,1528896669.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:10.223Z,1528896670.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:10.635Z,1528896670.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:11.035Z,1528896671.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:11.433Z,1528896671.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:11.829Z,1528896671.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:12.236Z,1528896672.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:12.633Z,1528896672.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:13.035Z,1528896673.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:13.432Z,1528896673.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:13.823Z,1528896673.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:14.232Z,1528896674.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:14.634Z,1528896674.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:15.032Z,1528896675.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:15.454Z,1528896675.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:15.828Z,1528896675.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:16.223Z,1528896676.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:16.636Z,1528896676.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:17.035Z,1528896677.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:17.433Z,1528896677.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:17.828Z,1528896677.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:18.239Z,1528896678.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:18.634Z,1528896678.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:19.035Z,1528896679.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:19.439Z,1528896679.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:19.824Z,1528896679.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:20.239Z,1528896680.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:20.633Z,1528896680.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:21.032Z,1528896681.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:21.439Z,1528896681.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:21.828Z,1528896681.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:22.223Z,1528896682.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:22.639Z,1528896682.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:23.035Z,1528896683.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:23.434Z,1528896683.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:23.830Z,1528896683.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:24.228Z,1528896684.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:24.633Z,1528896684.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:25.035Z,1528896685.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:25.441Z,1528896685.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:25.824Z,1528896685.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:26.235Z,1528896686.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:26.640Z,1528896686.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:27.033Z,1528896687.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:27.435Z,1528896687.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:27.828Z,1528896687.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:28.224Z,1528896688.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:28.635Z,1528896688.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:29.035Z,1528896689.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:29.433Z,1528896689.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:29.828Z,1528896689.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:30.232Z,1528896690.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:30.634Z,1528896690.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:31.034Z,1528896691.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:31.435Z,1528896691.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:31.829Z,1528896691.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:32.228Z,1528896692.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:32.633Z,1528896692.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:33.034Z,1528896693.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:33.439Z,1528896693.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:33.832Z,1528896693.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:34.225Z,1528896694.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:34.635Z,1528896694.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:35.036Z,1528896695.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:35.434Z,1528896695.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:35.832Z,1528896695.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:36.236Z,1528896696.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:36.634Z,1528896696.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:37.040Z,1528896697.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:37.433Z,1528896697.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:37.828Z,1528896697.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:38.229Z,1528896698.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:38.635Z,1528896698.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:39.032Z,1528896699.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:39.435Z,1528896699.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:39.834Z,1528896699.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:40.224Z,1528896700.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:40.639Z,1528896700.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:41.035Z,1528896701.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:41.432Z,1528896701.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:41.835Z,1528896701.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:42.239Z,1528896702.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:42.624Z,1528896702.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:43.029Z,1528896703.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:43.439Z,1528896703.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:43.833Z,1528896703.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:44.235Z,1528896704.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:44.633Z,1528896704.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:45.022Z,1528896705.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:45.430Z,1528896705.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:45.831Z,1528896705.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:46.224Z,1528896706.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:46.633Z,1528896706.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:47.037Z,1528896707.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:47.436Z,1528896707.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:47.837Z,1528896707.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:48.231Z,1528896708.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:48.625Z,1528896708.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:49.028Z,1528896709.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:49.428Z,1528896709.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:49.833Z,1528896709.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:50.251Z,1528896710.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:50.648Z,1528896710.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:51.024Z,1528896711.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:51.431Z,1528896711.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:51.840Z,1528896711.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:52.226Z,1528896712.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:52.639Z,1528896712.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:53.041Z,1528896713.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:53.438Z,1528896713.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:53.841Z,1528896713.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:54.230Z,1528896714.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:54.624Z,1528896714.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:55.030Z,1528896715.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:55.436Z,1528896715.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:55.834Z,1528896715.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:56.246Z,1528896716.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:56.650Z,1528896716.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:57.034Z,1528896717.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:57.430Z,1528896717.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:57.831Z,1528896717.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:58.236Z,1528896718.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:58.642Z,1528896718.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:31:59.042Z,1528896719.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:02.148Z,1528896722.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:02.322Z,1528896722.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:02.693Z,1528896722.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:03.092Z,1528896723.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:03.491Z,1528896723.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:03.900Z,1528896723.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:04.299Z,1528896724.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:04.700Z,1528896724.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:05.094Z,1528896725.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:05.487Z,1528896725.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:05.891Z,1528896725.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:06.301Z,1528896726.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:06.700Z,1528896726.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:07.104Z,1528896727.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:07.504Z,1528896727.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:07.888Z,1528896727.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:08.291Z,1528896728.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:08.701Z,1528896728.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:09.101Z,1528896729.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:09.500Z,1528896729.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:09.892Z,1528896729.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:10.291Z,1528896730.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:10.700Z,1528896730.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:11.101Z,1528896731.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:11.501Z,1528896731.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:11.896Z,1528896731.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:12.309Z,1528896732.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:12.702Z,1528896732.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:13.108Z,1528896733.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:13.497Z,1528896733.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:13.896Z,1528896733.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:14.292Z,1528896734.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:14.701Z,1528896734.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:15.105Z,1528896735.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:15.500Z,1528896735.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:15.900Z,1528896735.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:16.292Z,1528896736.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:16.712Z,1528896736.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:17.112Z,1528896737.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:17.511Z,1528896737.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:17.908Z,1528896737.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:18.282Z,1528896738.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:18.715Z,1528896738.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:19.113Z,1528896739.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:19.519Z,1528896739.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:19.888Z,1528896739.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:20.288Z,1528896740.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:20.717Z,1528896740.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:21.099Z,1528896741.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:21.496Z,1528896741.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:21.890Z,1528896741.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:22.288Z,1528896742.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:22.694Z,1528896742.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:23.095Z,1528896743.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:23.499Z,1528896743.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:23.895Z,1528896743.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:24.288Z,1528896744.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:24.690Z,1528896744.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:25.089Z,1528896745.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:25.489Z,1528896745.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:25.895Z,1528896745.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:26.298Z,1528896746.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:26.700Z,1528896746.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:27.090Z,1528896747.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:27.490Z,1528896747.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:27.896Z,1528896747.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:28.292Z,1528896748.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:28.689Z,1528896748.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:29.095Z,1528896749.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:29.494Z,1528896749.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:29.895Z,1528896749.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:30.296Z,1528896750.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:30.690Z,1528896750.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:31.092Z,1528896751.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:31.489Z,1528896751.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:31.898Z,1528896751.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:32.299Z,1528896752.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:32.696Z,1528896752.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:33.087Z,1528896753.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:33.489Z,1528896753.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:33.889Z,1528896753.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:34.291Z,1528896754.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:34.696Z,1528896754.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:35.098Z,1528896755.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:35.498Z,1528896755.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:35.895Z,1528896755.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:36.288Z,1528896756.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:36.690Z,1528896756.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:37.090Z,1528896757.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:37.496Z,1528896757.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:37.898Z,1528896757.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:38.322Z,1528896758.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:38.700Z,1528896758.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:39.091Z,1528896759.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:39.489Z,1528896759.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:39.891Z,1528896759.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:40.291Z,1528896760.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:40.689Z,1528896760.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:41.095Z,1528896761.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:41.499Z,1528896761.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:41.896Z,1528896761.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:42.289Z,1528896762.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:42.691Z,1528896762.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:43.089Z,1528896763.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:43.496Z,1528896763.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:43.900Z,1528896763.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:44.298Z,1528896764.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:44.695Z,1528896764.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:45.091Z,1528896765.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:45.490Z,1528896765.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:45.889Z,1528896765.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:46.291Z,1528896766.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:46.696Z,1528896766.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:47.125Z,1528896767.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:47.499Z,1528896767.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:47.895Z,1528896767.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:48.296Z,1528896768.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:48.692Z,1528896768.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:49.090Z,1528896769.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:49.491Z,1528896769.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:49.900Z,1528896769.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:50.299Z,1528896770.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:50.697Z,1528896770.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:51.092Z,1528896771.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:51.490Z,1528896771.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:51.896Z,1528896771.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:52.291Z,1528896772.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:52.689Z,1528896772.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:53.095Z,1528896773.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:53.500Z,1528896773.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:53.895Z,1528896773.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:54.291Z,1528896774.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:54.691Z,1528896774.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:55.092Z,1528896775.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:55.491Z,1528896775.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:55.899Z,1528896775.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:56.322Z,1528896776.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:56.704Z,1528896776.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:57.096Z,1528896777.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:57.492Z,1528896777.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:57.895Z,1528896777.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:58.294Z,1528896778.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:58.690Z,1528896778.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:58.693Z,1528896778.693 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T13:32:58.694Z,1528896778.694 [Default:CheckIn:C.Wait] Stopped
2018-06-13T13:32:58.694Z,1528896778.694 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T13:32:58.694Z,1528896778.694 [Default:CheckIn:D] Running Loop=1
2018-06-13T13:32:59.108Z,1528896779.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:59.111Z,1528896779.111 [Default:CheckIn:D] Stopped
2018-06-13T13:32:59.111Z,1528896779.111 [Default:CheckIn:E] Running Loop=1
2018-06-13T13:32:59.505Z,1528896779.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:32:59.508Z,1528896779.508 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 605.761133 min 
2018-06-13T13:32:59.508Z,1528896779.508 [Default:CheckIn:E] Stopped
2018-06-13T13:32:59.508Z,1528896779.508 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T13:32:59.509Z,1528896779.509 [Default:CheckIn] Stopped
2018-06-13T13:32:59.509Z,1528896779.509 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T13:32:59.509Z,1528896779.509 [Default:CheckIn](INFO): Running loop #59
2018-06-13T13:32:59.509Z,1528896779.509 [Default:CheckIn] Running Loop=59
2018-06-13T13:32:59.509Z,1528896779.509 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T13:32:59.509Z,1528896779.509 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T13:32:59.907Z,1528896779.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:00.301Z,1528896780.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:00.698Z,1528896780.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:01.098Z,1528896781.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:01.512Z,1528896781.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:01.910Z,1528896781.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:02.316Z,1528896782.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:02.706Z,1528896782.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:05.806Z,1528896785.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:05.963Z,1528896785.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:06.359Z,1528896786.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:06.759Z,1528896786.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:07.160Z,1528896787.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:07.532Z,1528896787.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:07.932Z,1528896787.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:08.368Z,1528896788.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:08.750Z,1528896788.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:09.166Z,1528896789.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:09.563Z,1528896789.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:09.947Z,1528896789.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:10.335Z,1528896790.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:10.737Z,1528896790.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:11.138Z,1528896791.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:11.535Z,1528896791.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:11.947Z,1528896791.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:12.347Z,1528896792.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:12.743Z,1528896792.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:13.144Z,1528896793.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:13.544Z,1528896793.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:13.939Z,1528896793.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:14.337Z,1528896794.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:14.738Z,1528896794.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:15.142Z,1528896795.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:15.543Z,1528896795.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:15.944Z,1528896795.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:16.335Z,1528896796.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:16.738Z,1528896796.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:17.138Z,1528896797.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:17.535Z,1528896797.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:17.948Z,1528896797.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:18.347Z,1528896798.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:18.743Z,1528896798.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:19.137Z,1528896799.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:19.538Z,1528896799.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:19.938Z,1528896799.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:20.337Z,1528896800.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:20.737Z,1528896800.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:21.143Z,1528896801.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:21.547Z,1528896801.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:21.943Z,1528896801.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:22.335Z,1528896802.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:22.738Z,1528896802.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:23.138Z,1528896803.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:23.536Z,1528896803.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:23.943Z,1528896803.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:23.943Z,1528896803.943 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 202
2018-06-13T13:33:23.943Z,1528896803.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:33:23.945Z,1528896803.945 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:23.946Z,1528896803.946 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 202
2018-06-13T13:33:23.946Z,1528896803.946 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:33:23.947Z,1528896803.947 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:23.947Z,1528896803.947 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 202
2018-06-13T13:33:23.947Z,1528896803.947 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:33:24.037Z,1528896804.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:33:24.037Z,1528896804.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:33:24.038Z,1528896804.038 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:33:24.417Z,1528896804.417 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:33:24.417Z,1528896804.417 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 202
2018-06-13T13:33:24.417Z,1528896804.417 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:33:24.418Z,1528896804.418 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 202
2018-06-13T13:33:24.418Z,1528896804.418 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:33:24.418Z,1528896804.418 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 202
2018-06-13T13:33:24.747Z,1528896804.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:33:24.748Z,1528896804.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:33:24.748Z,1528896804.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:33:24.749Z,1528896804.749 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:33:24.749Z,1528896804.749 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:33:24.750Z,1528896804.750 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:33:24.750Z,1528896804.750 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:33:24.750Z,1528896804.750 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:33:24.751Z,1528896804.751 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:33:25.135Z,1528896805.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:33:25.136Z,1528896805.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:25.542Z,1528896805.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:33:25.543Z,1528896805.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:25.940Z,1528896805.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:33:25.941Z,1528896805.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:26.340Z,1528896806.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:33:26.341Z,1528896806.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:26.751Z,1528896806.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:33:26.752Z,1528896806.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:27.148Z,1528896807.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:33:27.150Z,1528896807.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:27.553Z,1528896807.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:33:27.554Z,1528896807.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:27.948Z,1528896807.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:33:27.950Z,1528896807.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:28.344Z,1528896808.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:33:28.350Z,1528896808.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:28.739Z,1528896808.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:33:28.740Z,1528896808.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:29.156Z,1528896809.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:33:29.157Z,1528896809.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:29.541Z,1528896809.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:33:29.542Z,1528896809.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:29.949Z,1528896809.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:33:29.950Z,1528896809.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:30.352Z,1528896810.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:33:30.353Z,1528896810.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:30.750Z,1528896810.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:33:30.751Z,1528896810.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:31.141Z,1528896811.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:33:31.142Z,1528896811.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:31.549Z,1528896811.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:33:31.550Z,1528896811.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:31.947Z,1528896811.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:33:31.947Z,1528896811.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:32.356Z,1528896812.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:33:32.361Z,1528896812.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:32.748Z,1528896812.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:33:32.753Z,1528896812.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:33.159Z,1528896813.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:33:33.160Z,1528896813.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:33.552Z,1528896813.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:33:33.553Z,1528896813.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:33.956Z,1528896813.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:33:33.957Z,1528896813.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:34.407Z,1528896814.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:33:34.408Z,1528896814.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:34.734Z,1528896814.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:33:34.735Z,1528896814.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:35.151Z,1528896815.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T13:33:35.152Z,1528896815.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:35.531Z,1528896815.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T13:33:35.532Z,1528896815.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:35.962Z,1528896815.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T13:33:35.963Z,1528896815.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:36.347Z,1528896816.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T13:33:36.348Z,1528896816.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:36.746Z,1528896816.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T13:33:36.747Z,1528896816.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:37.138Z,1528896817.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T13:33:37.138Z,1528896817.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:37.544Z,1528896817.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T13:33:37.545Z,1528896817.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:37.936Z,1528896817.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T13:33:37.937Z,1528896817.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:38.338Z,1528896818.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T13:33:38.339Z,1528896818.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:38.738Z,1528896818.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T13:33:38.739Z,1528896818.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:39.143Z,1528896819.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T13:33:39.144Z,1528896819.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:39.546Z,1528896819.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T13:33:39.547Z,1528896819.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:39.947Z,1528896819.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T13:33:39.948Z,1528896819.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:40.336Z,1528896820.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T13:33:40.337Z,1528896820.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:40.740Z,1528896820.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T13:33:40.741Z,1528896820.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:41.142Z,1528896821.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T13:33:41.143Z,1528896821.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:41.540Z,1528896821.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T13:33:41.542Z,1528896821.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:41.948Z,1528896821.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T13:33:41.949Z,1528896821.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:42.347Z,1528896822.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T13:33:42.348Z,1528896822.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:42.745Z,1528896822.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T13:33:42.746Z,1528896822.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:43.140Z,1528896823.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T13:33:43.141Z,1528896823.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:43.538Z,1528896823.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T13:33:43.539Z,1528896823.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:43.936Z,1528896823.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T13:33:43.937Z,1528896823.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:44.340Z,1528896824.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:44.744Z,1528896824.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:45.145Z,1528896825.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:45.547Z,1528896825.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:45.949Z,1528896825.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:46.335Z,1528896826.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:46.741Z,1528896826.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:47.150Z,1528896827.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:47.535Z,1528896827.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:47.947Z,1528896827.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:48.347Z,1528896828.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:48.745Z,1528896828.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:49.139Z,1528896829.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:49.538Z,1528896829.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:49.935Z,1528896829.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:50.339Z,1528896830.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:50.738Z,1528896830.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:51.144Z,1528896831.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:51.552Z,1528896831.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:51.948Z,1528896831.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:52.335Z,1528896832.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:52.744Z,1528896832.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:53.142Z,1528896833.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:53.536Z,1528896833.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:53.947Z,1528896833.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:54.351Z,1528896834.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:54.748Z,1528896834.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:55.139Z,1528896835.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:55.542Z,1528896835.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:55.935Z,1528896835.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:56.344Z,1528896836.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:56.738Z,1528896836.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:57.148Z,1528896837.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:57.552Z,1528896837.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:57.948Z,1528896837.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:58.336Z,1528896838.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:58.748Z,1528896838.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:33:59.144Z,1528896839.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:02.257Z,1528896842.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:02.441Z,1528896842.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:02.831Z,1528896842.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:03.235Z,1528896843.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:03.608Z,1528896843.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:04.008Z,1528896844.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:04.405Z,1528896844.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:04.807Z,1528896844.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:05.234Z,1528896845.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:05.634Z,1528896845.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:06.032Z,1528896846.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:06.409Z,1528896846.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:06.803Z,1528896846.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:07.212Z,1528896847.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:07.608Z,1528896847.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:08.031Z,1528896848.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:08.434Z,1528896848.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:08.819Z,1528896848.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:09.210Z,1528896849.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:09.609Z,1528896849.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:10.010Z,1528896850.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:10.407Z,1528896850.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:10.812Z,1528896850.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:11.240Z,1528896851.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:11.619Z,1528896851.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:12.015Z,1528896852.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:12.410Z,1528896852.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:12.807Z,1528896852.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:13.210Z,1528896853.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:13.610Z,1528896853.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:14.015Z,1528896854.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:14.419Z,1528896854.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:14.816Z,1528896854.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:15.208Z,1528896855.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:15.610Z,1528896855.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:16.013Z,1528896856.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:16.409Z,1528896856.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:16.812Z,1528896856.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:17.261Z,1528896857.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:17.619Z,1528896857.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:18.016Z,1528896858.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:18.410Z,1528896858.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:18.811Z,1528896858.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:19.210Z,1528896859.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:19.610Z,1528896859.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:20.015Z,1528896860.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:20.415Z,1528896860.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:20.812Z,1528896860.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:21.207Z,1528896861.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:21.610Z,1528896861.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:22.009Z,1528896862.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:22.408Z,1528896862.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:22.812Z,1528896862.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:23.216Z,1528896863.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:23.615Z,1528896863.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:24.015Z,1528896864.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:24.410Z,1528896864.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:24.837Z,1528896864.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:25.211Z,1528896865.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:25.616Z,1528896865.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:26.019Z,1528896866.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:26.419Z,1528896866.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:26.843Z,1528896866.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:27.211Z,1528896867.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:27.623Z,1528896867.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:28.010Z,1528896868.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:28.408Z,1528896868.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:28.810Z,1528896868.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:29.216Z,1528896869.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:29.616Z,1528896869.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:30.016Z,1528896870.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:30.413Z,1528896870.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:30.810Z,1528896870.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:31.210Z,1528896871.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:31.608Z,1528896871.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:32.015Z,1528896872.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:32.419Z,1528896872.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:32.815Z,1528896872.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:33.208Z,1528896873.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:33.609Z,1528896873.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:34.009Z,1528896874.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:34.408Z,1528896874.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:34.812Z,1528896874.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:35.215Z,1528896875.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:35.615Z,1528896875.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:36.015Z,1528896876.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:36.411Z,1528896876.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:36.807Z,1528896876.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:37.211Z,1528896877.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:37.616Z,1528896877.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:38.015Z,1528896878.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:38.418Z,1528896878.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:38.820Z,1528896878.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:39.208Z,1528896879.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:39.612Z,1528896879.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:40.022Z,1528896880.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:40.408Z,1528896880.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:40.811Z,1528896880.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:41.216Z,1528896881.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:41.619Z,1528896881.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:42.019Z,1528896882.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:42.416Z,1528896882.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:42.811Z,1528896882.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:43.211Z,1528896883.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:43.610Z,1528896883.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:44.019Z,1528896884.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:44.419Z,1528896884.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:44.820Z,1528896884.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:45.255Z,1528896885.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:45.611Z,1528896885.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:46.010Z,1528896886.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:46.412Z,1528896886.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:46.811Z,1528896886.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:47.220Z,1528896887.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:47.619Z,1528896887.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:48.021Z,1528896888.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:48.410Z,1528896888.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:48.812Z,1528896888.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:49.211Z,1528896889.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:49.616Z,1528896889.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:50.019Z,1528896890.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:50.419Z,1528896890.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:50.824Z,1528896890.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:51.212Z,1528896891.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:51.611Z,1528896891.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:52.010Z,1528896892.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:52.413Z,1528896892.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:52.813Z,1528896892.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:53.215Z,1528896893.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:53.623Z,1528896893.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:54.019Z,1528896894.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:54.422Z,1528896894.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:54.812Z,1528896894.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:55.212Z,1528896895.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:55.624Z,1528896895.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:56.020Z,1528896896.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:56.420Z,1528896896.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:56.816Z,1528896896.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:57.212Z,1528896897.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:57.626Z,1528896897.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:58.023Z,1528896898.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:58.412Z,1528896898.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:58.814Z,1528896898.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:34:59.219Z,1528896899.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:02.350Z,1528896902.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:02.520Z,1528896902.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:02.901Z,1528896902.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:03.299Z,1528896903.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:03.704Z,1528896903.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:04.111Z,1528896904.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:04.508Z,1528896904.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:04.911Z,1528896904.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:05.285Z,1528896905.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:05.685Z,1528896905.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:06.084Z,1528896906.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:06.484Z,1528896906.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:06.884Z,1528896906.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:07.315Z,1528896907.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:07.695Z,1528896907.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:08.095Z,1528896908.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:08.488Z,1528896908.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:08.884Z,1528896908.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:09.284Z,1528896909.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:09.688Z,1528896909.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:10.095Z,1528896910.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:10.495Z,1528896910.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:10.891Z,1528896910.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:11.288Z,1528896911.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:11.687Z,1528896911.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:12.086Z,1528896912.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:12.492Z,1528896912.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:12.892Z,1528896912.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:13.295Z,1528896913.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:13.695Z,1528896913.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:14.092Z,1528896914.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:14.487Z,1528896914.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:14.888Z,1528896914.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:15.286Z,1528896915.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:15.687Z,1528896915.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:16.089Z,1528896916.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:16.491Z,1528896916.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:16.892Z,1528896916.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:17.286Z,1528896917.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:17.683Z,1528896917.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:18.086Z,1528896918.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:18.486Z,1528896918.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:18.883Z,1528896918.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:19.292Z,1528896919.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:19.695Z,1528896919.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:20.098Z,1528896920.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:20.486Z,1528896920.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:20.888Z,1528896920.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:21.286Z,1528896921.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:21.687Z,1528896921.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:22.100Z,1528896922.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:22.492Z,1528896922.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:22.895Z,1528896922.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:23.289Z,1528896923.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:23.683Z,1528896923.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:24.088Z,1528896924.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:24.487Z,1528896924.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:24.888Z,1528896924.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:25.296Z,1528896925.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:25.695Z,1528896925.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:26.097Z,1528896926.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:26.487Z,1528896926.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:26.889Z,1528896926.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:27.287Z,1528896927.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:27.688Z,1528896927.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:28.096Z,1528896928.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:28.492Z,1528896928.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:28.892Z,1528896928.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:29.288Z,1528896929.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:29.684Z,1528896929.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:30.087Z,1528896930.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:30.489Z,1528896930.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:30.883Z,1528896930.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:31.296Z,1528896931.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:31.695Z,1528896931.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:32.096Z,1528896932.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:32.486Z,1528896932.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:32.888Z,1528896932.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:33.288Z,1528896933.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:33.687Z,1528896933.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:34.096Z,1528896934.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:34.495Z,1528896934.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:34.891Z,1528896934.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:35.289Z,1528896935.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:35.684Z,1528896935.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:36.088Z,1528896936.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:36.491Z,1528896936.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:36.883Z,1528896936.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:37.296Z,1528896937.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:37.695Z,1528896937.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:38.093Z,1528896938.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:38.488Z,1528896938.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:38.890Z,1528896938.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:39.284Z,1528896939.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:39.688Z,1528896939.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:40.096Z,1528896940.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:40.497Z,1528896940.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:40.897Z,1528896940.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:41.287Z,1528896941.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:41.684Z,1528896941.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:42.089Z,1528896942.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:42.492Z,1528896942.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:42.884Z,1528896942.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:43.297Z,1528896943.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:43.696Z,1528896943.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:44.104Z,1528896944.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:44.487Z,1528896944.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:44.890Z,1528896944.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:45.293Z,1528896945.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:45.688Z,1528896945.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:46.096Z,1528896946.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:46.496Z,1528896946.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:46.895Z,1528896946.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:47.291Z,1528896947.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:47.683Z,1528896947.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:48.094Z,1528896948.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:48.490Z,1528896948.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:48.889Z,1528896948.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:49.304Z,1528896949.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:49.701Z,1528896949.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:50.099Z,1528896950.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:50.496Z,1528896950.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:50.900Z,1528896950.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:51.295Z,1528896951.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:51.696Z,1528896951.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:52.110Z,1528896952.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:52.499Z,1528896952.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:52.901Z,1528896952.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:53.291Z,1528896953.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:53.698Z,1528896953.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:54.089Z,1528896954.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:54.492Z,1528896954.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:54.890Z,1528896954.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:55.302Z,1528896955.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:55.702Z,1528896955.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:56.101Z,1528896956.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:56.496Z,1528896956.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:56.892Z,1528896956.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:57.295Z,1528896957.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:57.697Z,1528896957.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:58.098Z,1528896958.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:58.502Z,1528896958.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:58.902Z,1528896958.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:35:59.302Z,1528896959.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:02.400Z,1528896962.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:02.540Z,1528896962.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:02.942Z,1528896962.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:03.347Z,1528896963.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:03.748Z,1528896963.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:04.140Z,1528896964.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:04.541Z,1528896964.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:04.928Z,1528896964.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:05.355Z,1528896965.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:05.751Z,1528896965.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:06.153Z,1528896966.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:06.529Z,1528896966.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:06.923Z,1528896966.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:07.332Z,1528896967.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:07.728Z,1528896967.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:08.135Z,1528896968.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:08.556Z,1528896968.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:08.955Z,1528896968.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:09.327Z,1528896969.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:09.727Z,1528896969.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:10.128Z,1528896970.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:10.528Z,1528896970.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:10.927Z,1528896970.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:11.339Z,1528896971.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:11.735Z,1528896971.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:12.135Z,1528896972.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:12.533Z,1528896972.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:12.927Z,1528896972.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:13.332Z,1528896973.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:13.730Z,1528896973.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:14.135Z,1528896974.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:14.539Z,1528896974.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:14.935Z,1528896974.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:15.328Z,1528896975.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:15.730Z,1528896975.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:16.130Z,1528896976.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:16.528Z,1528896976.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:16.929Z,1528896976.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:17.336Z,1528896977.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:17.735Z,1528896977.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:18.136Z,1528896978.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:18.545Z,1528896978.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:18.927Z,1528896978.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:19.331Z,1528896979.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:19.730Z,1528896979.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:20.140Z,1528896980.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:20.544Z,1528896980.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:20.940Z,1528896980.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:21.327Z,1528896981.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:21.736Z,1528896981.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:22.133Z,1528896982.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:22.528Z,1528896982.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:22.936Z,1528896982.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:23.338Z,1528896983.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:23.740Z,1528896983.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:24.148Z,1528896984.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:24.540Z,1528896984.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:24.928Z,1528896984.928 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:24.928Z,1528896984.928 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 203
2018-06-13T13:36:24.928Z,1528896984.928 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:36:24.930Z,1528896984.930 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:24.930Z,1528896984.930 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 203
2018-06-13T13:36:24.930Z,1528896984.930 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:36:24.932Z,1528896984.932 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:24.932Z,1528896984.932 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 203
2018-06-13T13:36:24.932Z,1528896984.932 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:36:25.009Z,1528896985.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:36:25.009Z,1528896985.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:36:25.010Z,1528896985.010 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:36:25.417Z,1528896985.417 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:36:25.417Z,1528896985.417 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 203
2018-06-13T13:36:25.418Z,1528896985.418 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:36:25.418Z,1528896985.418 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 203
2018-06-13T13:36:25.418Z,1528896985.418 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:36:25.418Z,1528896985.418 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 203
2018-06-13T13:36:25.734Z,1528896985.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:36:25.734Z,1528896985.734 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:36:25.735Z,1528896985.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:36:25.735Z,1528896985.735 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:36:25.736Z,1528896985.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:36:25.736Z,1528896985.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:36:25.736Z,1528896985.736 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:36:25.737Z,1528896985.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:36:25.737Z,1528896985.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:36:26.149Z,1528896986.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:36:26.150Z,1528896986.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:26.543Z,1528896986.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:36:26.544Z,1528896986.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:26.954Z,1528896986.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:36:26.955Z,1528896986.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:27.320Z,1528896987.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:36:27.330Z,1528896987.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:27.724Z,1528896987.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:36:27.745Z,1528896987.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:28.128Z,1528896988.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:36:28.145Z,1528896988.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:28.529Z,1528896988.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:36:28.530Z,1528896988.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:28.927Z,1528896988.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:36:28.928Z,1528896988.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:29.355Z,1528896989.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:36:29.356Z,1528896989.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:29.739Z,1528896989.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:36:29.739Z,1528896989.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:30.135Z,1528896990.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:36:30.135Z,1528896990.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:30.536Z,1528896990.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:36:30.537Z,1528896990.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:30.927Z,1528896990.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:36:30.928Z,1528896990.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:31.329Z,1528896991.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:36:31.330Z,1528896991.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:31.732Z,1528896991.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:36:31.732Z,1528896991.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:32.136Z,1528896992.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:36:32.137Z,1528896992.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:32.538Z,1528896992.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:36:32.539Z,1528896992.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:32.940Z,1528896992.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:36:32.941Z,1528896992.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:33.331Z,1528896993.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:36:33.332Z,1528896993.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:33.742Z,1528896993.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:36:33.743Z,1528896993.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:34.140Z,1528896994.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:36:34.141Z,1528896994.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:34.536Z,1528896994.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:36:34.537Z,1528896994.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:34.936Z,1528896994.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:36:34.937Z,1528896994.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:35.330Z,1528896995.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:36:35.331Z,1528896995.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:35.727Z,1528896995.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:36:35.728Z,1528896995.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:36.140Z,1528896996.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T13:36:36.141Z,1528896996.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:36.541Z,1528896996.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T13:36:36.542Z,1528896996.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:36.940Z,1528896996.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T13:36:36.941Z,1528896996.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:37.333Z,1528896997.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T13:36:37.334Z,1528896997.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:37.731Z,1528896997.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T13:36:37.732Z,1528896997.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:38.140Z,1528896998.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T13:36:38.141Z,1528896998.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:38.540Z,1528896998.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T13:36:38.541Z,1528896998.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:38.940Z,1528896998.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T13:36:38.941Z,1528896998.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:39.330Z,1528896999.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T13:36:39.331Z,1528896999.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:39.733Z,1528896999.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T13:36:39.734Z,1528896999.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:40.141Z,1528897000.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T13:36:40.142Z,1528897000.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:40.545Z,1528897000.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T13:36:40.546Z,1528897000.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:40.944Z,1528897000.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T13:36:40.945Z,1528897000.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:41.330Z,1528897001.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T13:36:41.331Z,1528897001.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:41.731Z,1528897001.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T13:36:41.732Z,1528897001.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:42.143Z,1528897002.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T13:36:42.144Z,1528897002.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:42.547Z,1528897002.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T13:36:42.548Z,1528897002.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:42.943Z,1528897002.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T13:36:42.944Z,1528897002.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:43.334Z,1528897003.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T13:36:43.335Z,1528897003.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:43.730Z,1528897003.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T13:36:43.731Z,1528897003.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:44.141Z,1528897004.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T13:36:44.142Z,1528897004.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:44.548Z,1528897004.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T13:36:44.550Z,1528897004.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:44.944Z,1528897004.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:45.333Z,1528897005.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:45.731Z,1528897005.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:46.141Z,1528897006.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:46.544Z,1528897006.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:46.943Z,1528897006.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:47.332Z,1528897007.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:47.731Z,1528897007.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:48.144Z,1528897008.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:48.543Z,1528897008.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:48.944Z,1528897008.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:49.332Z,1528897009.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:49.740Z,1528897009.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:50.144Z,1528897010.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:50.543Z,1528897010.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:50.948Z,1528897010.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:51.331Z,1528897011.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:51.732Z,1528897011.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:52.141Z,1528897012.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:52.540Z,1528897012.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:52.948Z,1528897012.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:53.334Z,1528897013.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:53.731Z,1528897013.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:54.148Z,1528897014.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:54.548Z,1528897014.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:54.945Z,1528897014.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:55.333Z,1528897015.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:55.733Z,1528897015.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:56.144Z,1528897016.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:56.548Z,1528897016.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:56.941Z,1528897016.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:57.334Z,1528897017.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:57.733Z,1528897017.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:58.144Z,1528897018.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:58.545Z,1528897018.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:58.952Z,1528897018.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:36:59.334Z,1528897019.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:02.440Z,1528897022.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:02.592Z,1528897022.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:02.996Z,1528897022.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:03.389Z,1528897023.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:03.776Z,1528897023.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:04.164Z,1528897024.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:04.581Z,1528897024.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:04.968Z,1528897024.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:05.395Z,1528897025.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:05.792Z,1528897025.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:06.194Z,1528897026.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:06.569Z,1528897026.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:06.972Z,1528897026.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:07.369Z,1528897027.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:07.768Z,1528897027.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:08.196Z,1528897028.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:08.599Z,1528897028.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:08.976Z,1528897028.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:09.383Z,1528897029.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:09.781Z,1528897029.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:10.185Z,1528897030.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:10.592Z,1528897030.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:10.981Z,1528897030.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:11.384Z,1528897031.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:11.781Z,1528897031.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:12.185Z,1528897032.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:12.589Z,1528897032.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:12.992Z,1528897032.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:13.380Z,1528897033.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:13.783Z,1528897033.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:14.184Z,1528897034.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:14.592Z,1528897034.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:14.985Z,1528897034.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:15.418Z,1528897035.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:15.772Z,1528897035.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:16.185Z,1528897036.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:16.593Z,1528897036.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:16.984Z,1528897036.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:17.375Z,1528897037.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:17.780Z,1528897037.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:18.192Z,1528897038.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:18.596Z,1528897038.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:18.992Z,1528897038.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:19.380Z,1528897039.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:19.775Z,1528897039.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:20.196Z,1528897040.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:20.585Z,1528897040.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:20.983Z,1528897040.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:21.373Z,1528897041.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:21.780Z,1528897041.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:22.190Z,1528897042.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:22.586Z,1528897042.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:22.984Z,1528897042.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:23.380Z,1528897043.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:23.777Z,1528897043.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:24.183Z,1528897044.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:24.592Z,1528897044.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:24.986Z,1528897044.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:25.378Z,1528897045.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:25.780Z,1528897045.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:26.186Z,1528897046.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:26.585Z,1528897046.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:26.997Z,1528897046.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:27.378Z,1528897047.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:27.775Z,1528897047.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:28.186Z,1528897048.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:28.585Z,1528897048.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:28.992Z,1528897048.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:29.388Z,1528897049.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:29.776Z,1528897049.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:30.184Z,1528897050.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:30.596Z,1528897050.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:30.990Z,1528897050.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:31.375Z,1528897051.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:31.791Z,1528897051.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:32.176Z,1528897052.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:32.580Z,1528897052.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:33.007Z,1528897053.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:33.370Z,1528897053.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:33.775Z,1528897053.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:34.175Z,1528897054.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:34.580Z,1528897054.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:34.979Z,1528897054.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:35.383Z,1528897055.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:35.788Z,1528897055.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:36.188Z,1528897056.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:36.580Z,1528897056.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:36.973Z,1528897056.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:37.383Z,1528897057.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:37.782Z,1528897057.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:38.184Z,1528897058.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:38.575Z,1528897058.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:39.007Z,1528897059.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:39.388Z,1528897059.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:39.776Z,1528897059.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:40.185Z,1528897060.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:40.586Z,1528897060.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:40.988Z,1528897060.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:41.384Z,1528897061.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:41.769Z,1528897061.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:42.188Z,1528897062.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:42.583Z,1528897062.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:42.972Z,1528897062.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:43.382Z,1528897063.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:43.808Z,1528897063.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:44.207Z,1528897064.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:44.579Z,1528897064.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:44.978Z,1528897064.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:45.387Z,1528897065.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:45.780Z,1528897065.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:46.179Z,1528897066.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:46.585Z,1528897066.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:47.005Z,1528897067.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:47.415Z,1528897067.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:47.775Z,1528897067.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:48.186Z,1528897068.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:48.592Z,1528897068.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:48.979Z,1528897068.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:49.392Z,1528897069.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:49.798Z,1528897069.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:50.200Z,1528897070.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:50.578Z,1528897070.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:50.980Z,1528897070.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:51.379Z,1528897071.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:51.792Z,1528897071.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:52.182Z,1528897072.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:52.586Z,1528897072.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:52.996Z,1528897072.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:53.417Z,1528897073.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:53.775Z,1528897073.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:54.177Z,1528897074.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:54.589Z,1528897074.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:54.974Z,1528897074.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:55.386Z,1528897075.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:55.790Z,1528897075.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:56.191Z,1528897076.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:56.591Z,1528897076.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:56.984Z,1528897076.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:57.386Z,1528897077.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:57.783Z,1528897077.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:58.183Z,1528897078.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:58.593Z,1528897078.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:58.995Z,1528897078.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:37:59.405Z,1528897079.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:02.486Z,1528897082.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:02.490Z,1528897082.490 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T13:32:59.5Z
2018-06-13T13:38:02.490Z,1528897082.490 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T13:38:02.490Z,1528897082.490 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T13:38:02.646Z,1528897082.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:03.799Z,1528897083.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:03.981Z,1528897083.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:04.348Z,1528897084.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:04.743Z,1528897084.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:05.143Z,1528897085.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:05.543Z,1528897085.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:05.944Z,1528897085.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:06.349Z,1528897086.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:06.748Z,1528897086.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:07.156Z,1528897087.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:07.542Z,1528897087.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:07.941Z,1528897087.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:08.336Z,1528897088.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:11.560Z,1528897091.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:11.651Z,1528897091.651 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0236.lzma
2018-06-13T13:38:11.716Z,1528897091.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:12.105Z,1528897092.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:12.446Z,1528897092.446 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0236.lzma.bak
2018-06-13T13:38:12.446Z,1528897092.446 [DataOverHttps](INFO): SBD MOMSN=8329311
2018-06-13T13:38:12.516Z,1528897092.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:14.414Z,1528897094.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:14.576Z,1528897094.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:14.965Z,1528897094.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:15.368Z,1528897095.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:15.766Z,1528897095.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:18.918Z,1528897098.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:19.088Z,1528897099.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:19.481Z,1528897099.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:19.882Z,1528897099.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:20.270Z,1528897100.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:20.673Z,1528897100.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:21.070Z,1528897101.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:21.474Z,1528897101.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:21.877Z,1528897101.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:24.984Z,1528897104.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:25.099Z,1528897105.099 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0237.lzma
2018-06-13T13:38:25.138Z,1528897105.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:25.541Z,1528897105.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:25.894Z,1528897105.894 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0237.lzma.bak
2018-06-13T13:38:25.894Z,1528897105.894 [DataOverHttps](INFO): SBD MOMSN=8329314
2018-06-13T13:38:25.962Z,1528897105.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:27.824Z,1528897107.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:27.827Z,1528897107.827 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T13:38:27.827Z,1528897107.828 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T13:38:27.828Z,1528897107.828 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T13:38:27.978Z,1528897107.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:31.120Z,1528897111.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:31.280Z,1528897111.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:31.669Z,1528897111.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:32.077Z,1528897112.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:32.479Z,1528897112.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:32.875Z,1528897112.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:33.279Z,1528897113.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:33.652Z,1528897113.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:34.068Z,1528897114.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:34.456Z,1528897114.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:34.860Z,1528897114.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:35.255Z,1528897115.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:35.686Z,1528897115.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:36.083Z,1528897116.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:36.480Z,1528897116.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:36.860Z,1528897116.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:37.256Z,1528897117.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:37.660Z,1528897117.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:38.056Z,1528897118.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:38.463Z,1528897118.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:38.884Z,1528897118.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:39.283Z,1528897119.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:39.654Z,1528897119.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:40.055Z,1528897120.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:40.456Z,1528897120.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:40.855Z,1528897120.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:41.260Z,1528897121.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:41.667Z,1528897121.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:42.067Z,1528897122.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:42.463Z,1528897122.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:42.859Z,1528897122.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:43.254Z,1528897123.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:43.658Z,1528897123.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:44.059Z,1528897124.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:44.464Z,1528897124.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:44.867Z,1528897124.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:45.267Z,1528897125.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:45.658Z,1528897125.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:46.060Z,1528897126.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:46.460Z,1528897126.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:46.858Z,1528897126.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:47.257Z,1528897127.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:47.668Z,1528897127.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:48.063Z,1528897128.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:48.463Z,1528897128.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:48.859Z,1528897128.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:49.264Z,1528897129.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:49.658Z,1528897129.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:50.059Z,1528897130.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:50.463Z,1528897130.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:50.867Z,1528897130.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:51.267Z,1528897131.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:51.660Z,1528897131.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:52.057Z,1528897132.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:52.460Z,1528897132.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:52.855Z,1528897132.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:53.257Z,1528897133.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:53.667Z,1528897133.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:54.067Z,1528897134.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:54.464Z,1528897134.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:54.859Z,1528897134.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:55.255Z,1528897135.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:55.658Z,1528897135.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:56.064Z,1528897136.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:56.532Z,1528897136.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:56.863Z,1528897136.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:57.336Z,1528897137.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:57.754Z,1528897137.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:58.081Z,1528897138.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:58.461Z,1528897138.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:58.869Z,1528897138.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:59.253Z,1528897139.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:38:59.673Z,1528897139.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:00.080Z,1528897140.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:00.480Z,1528897140.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:00.855Z,1528897140.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:01.252Z,1528897141.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:01.657Z,1528897141.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:02.063Z,1528897142.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:02.468Z,1528897142.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:02.874Z,1528897142.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:03.276Z,1528897143.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:03.666Z,1528897143.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:04.062Z,1528897144.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:04.464Z,1528897144.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:04.865Z,1528897144.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:05.263Z,1528897145.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:05.675Z,1528897145.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:06.072Z,1528897146.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:06.481Z,1528897146.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:06.876Z,1528897146.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:07.265Z,1528897147.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:07.671Z,1528897147.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:08.069Z,1528897148.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:08.471Z,1528897148.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:08.880Z,1528897148.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:09.275Z,1528897149.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:09.672Z,1528897149.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:10.069Z,1528897150.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:10.474Z,1528897150.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:10.866Z,1528897150.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:11.252Z,1528897151.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:11.677Z,1528897151.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:12.074Z,1528897152.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:12.475Z,1528897152.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:12.853Z,1528897152.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:13.256Z,1528897153.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:13.657Z,1528897153.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:14.056Z,1528897154.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:14.483Z,1528897154.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:14.880Z,1528897154.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:15.279Z,1528897155.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:15.654Z,1528897155.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:16.056Z,1528897156.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:16.456Z,1528897156.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:16.856Z,1528897156.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:17.255Z,1528897157.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:17.682Z,1528897157.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:18.084Z,1528897158.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:18.480Z,1528897158.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:18.855Z,1528897158.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:19.256Z,1528897159.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:19.655Z,1528897159.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:20.055Z,1528897160.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:20.480Z,1528897160.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:20.880Z,1528897160.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:21.282Z,1528897161.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:21.655Z,1528897161.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:22.055Z,1528897162.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:22.456Z,1528897162.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:22.856Z,1528897162.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:23.256Z,1528897163.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:23.682Z,1528897163.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:24.080Z,1528897164.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:24.481Z,1528897164.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:24.855Z,1528897164.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:25.257Z,1528897165.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:25.660Z,1528897165.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:26.055Z,1528897166.055 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:26.055Z,1528897166.055 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 204
2018-06-13T13:39:26.055Z,1528897166.055 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:39:26.057Z,1528897166.057 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:26.057Z,1528897166.057 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 204
2018-06-13T13:39:26.057Z,1528897166.057 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:39:26.059Z,1528897166.059 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:26.059Z,1528897166.059 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 204
2018-06-13T13:39:26.059Z,1528897166.059 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:39:26.161Z,1528897166.161 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:39:26.161Z,1528897166.161 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:39:26.161Z,1528897166.161 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:39:26.561Z,1528897166.561 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:39:26.561Z,1528897166.561 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 204
2018-06-13T13:39:26.562Z,1528897166.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:39:26.562Z,1528897166.562 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 204
2018-06-13T13:39:26.562Z,1528897166.562 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:39:26.562Z,1528897166.562 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 204
2018-06-13T13:39:26.886Z,1528897166.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:39:26.886Z,1528897166.886 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:39:26.886Z,1528897166.886 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:39:26.887Z,1528897166.887 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:39:26.887Z,1528897166.887 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:39:26.887Z,1528897166.887 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:39:26.888Z,1528897166.888 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:39:26.888Z,1528897166.888 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:39:26.888Z,1528897166.888 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:39:27.263Z,1528897167.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:39:27.264Z,1528897167.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:27.660Z,1528897167.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:39:27.661Z,1528897167.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:28.059Z,1528897168.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:39:28.060Z,1528897168.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:28.458Z,1528897168.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:39:28.459Z,1528897168.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:28.861Z,1528897168.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:39:28.862Z,1528897168.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:29.260Z,1528897169.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:39:29.261Z,1528897169.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:29.693Z,1528897169.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:39:29.694Z,1528897169.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:30.088Z,1528897170.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:39:30.089Z,1528897170.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:30.486Z,1528897170.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:39:30.487Z,1528897170.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:30.863Z,1528897170.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:39:30.864Z,1528897170.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:31.259Z,1528897171.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:39:31.260Z,1528897171.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:31.658Z,1528897171.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:39:31.659Z,1528897171.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:32.059Z,1528897172.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:39:32.060Z,1528897172.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:35.202Z,1528897175.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T13:39:35.203Z,1528897175.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:35.368Z,1528897175.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T13:39:35.368Z,1528897175.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:35.749Z,1528897175.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T13:39:35.750Z,1528897175.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:36.141Z,1528897176.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T13:39:36.142Z,1528897176.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:36.541Z,1528897176.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T13:39:36.542Z,1528897176.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:36.943Z,1528897176.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T13:39:36.944Z,1528897176.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:37.348Z,1528897177.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T13:39:37.349Z,1528897177.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:37.745Z,1528897177.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T13:39:37.746Z,1528897177.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:38.149Z,1528897178.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T13:39:38.150Z,1528897178.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:38.545Z,1528897178.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T13:39:38.546Z,1528897178.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:38.941Z,1528897178.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T13:39:38.942Z,1528897178.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:39.345Z,1528897179.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T13:39:39.346Z,1528897179.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:39.740Z,1528897179.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T13:39:39.741Z,1528897179.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:40.142Z,1528897180.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T13:39:40.142Z,1528897180.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:40.550Z,1528897180.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T13:39:40.551Z,1528897180.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:40.956Z,1528897180.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T13:39:40.957Z,1528897180.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:41.345Z,1528897181.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T13:39:41.346Z,1528897181.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:41.744Z,1528897181.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T13:39:41.745Z,1528897181.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:42.142Z,1528897182.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T13:39:42.143Z,1528897182.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:42.542Z,1528897182.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T13:39:42.543Z,1528897182.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:42.943Z,1528897182.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T13:39:42.944Z,1528897182.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:43.342Z,1528897183.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T13:39:43.343Z,1528897183.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:43.745Z,1528897183.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T13:39:43.746Z,1528897183.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:44.149Z,1528897184.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T13:39:44.150Z,1528897184.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:44.544Z,1528897184.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T13:39:44.545Z,1528897184.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:44.941Z,1528897184.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T13:39:44.942Z,1528897184.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:45.342Z,1528897185.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T13:39:45.343Z,1528897185.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:45.741Z,1528897185.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T13:39:45.742Z,1528897185.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:46.142Z,1528897186.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:46.549Z,1528897186.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:46.949Z,1528897186.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:47.344Z,1528897187.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:47.742Z,1528897187.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:48.141Z,1528897188.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:48.542Z,1528897188.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:48.943Z,1528897188.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:49.341Z,1528897189.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:49.746Z,1528897189.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:50.149Z,1528897190.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:50.543Z,1528897190.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:50.943Z,1528897190.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:51.345Z,1528897191.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:51.743Z,1528897191.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:52.145Z,1528897192.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:52.555Z,1528897192.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:52.952Z,1528897192.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:53.352Z,1528897193.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:53.750Z,1528897193.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:54.148Z,1528897194.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:54.529Z,1528897194.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:54.927Z,1528897194.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:55.322Z,1528897195.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:55.754Z,1528897195.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:56.156Z,1528897196.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:56.547Z,1528897196.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:56.924Z,1528897196.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:57.328Z,1528897197.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:57.732Z,1528897197.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:58.127Z,1528897198.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:58.555Z,1528897198.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:58.960Z,1528897198.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:59.335Z,1528897199.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:39:59.731Z,1528897199.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:00.127Z,1528897200.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:00.531Z,1528897200.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:00.949Z,1528897200.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:01.331Z,1528897201.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:01.735Z,1528897201.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:02.139Z,1528897202.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:02.536Z,1528897202.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:02.936Z,1528897202.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:03.338Z,1528897203.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:03.732Z,1528897203.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:04.132Z,1528897204.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:04.539Z,1528897204.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:04.939Z,1528897204.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:05.336Z,1528897205.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:05.731Z,1528897205.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:06.128Z,1528897206.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:06.530Z,1528897206.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:06.931Z,1528897206.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:07.327Z,1528897207.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:07.735Z,1528897207.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:08.139Z,1528897208.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:08.540Z,1528897208.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:08.931Z,1528897208.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:09.331Z,1528897209.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:09.728Z,1528897209.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:10.131Z,1528897210.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:10.539Z,1528897210.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:10.940Z,1528897210.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:11.336Z,1528897211.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:11.731Z,1528897211.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:12.129Z,1528897212.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:12.531Z,1528897212.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:12.939Z,1528897212.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:13.336Z,1528897213.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:13.740Z,1528897213.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:14.142Z,1528897214.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:14.536Z,1528897214.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:14.942Z,1528897214.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:15.336Z,1528897215.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:15.729Z,1528897215.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:16.132Z,1528897216.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:16.545Z,1528897216.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:16.942Z,1528897216.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:17.341Z,1528897217.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:17.737Z,1528897217.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:18.132Z,1528897218.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:18.533Z,1528897218.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:18.934Z,1528897218.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:19.329Z,1528897219.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:19.741Z,1528897219.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:20.146Z,1528897220.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:20.537Z,1528897220.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:20.932Z,1528897220.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:21.335Z,1528897221.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:21.729Z,1528897221.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:22.130Z,1528897222.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:22.545Z,1528897222.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:22.940Z,1528897222.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:23.344Z,1528897223.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:23.737Z,1528897223.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:24.128Z,1528897224.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:24.531Z,1528897224.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:24.938Z,1528897224.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:25.335Z,1528897225.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:25.748Z,1528897225.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:26.145Z,1528897226.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:26.541Z,1528897226.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:26.932Z,1528897226.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:27.336Z,1528897227.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:27.738Z,1528897227.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:28.134Z,1528897228.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:28.550Z,1528897228.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:28.946Z,1528897228.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:29.352Z,1528897229.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:29.744Z,1528897229.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:30.146Z,1528897230.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:30.538Z,1528897230.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:30.939Z,1528897230.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:31.343Z,1528897231.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:31.752Z,1528897231.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:32.156Z,1528897232.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:35.252Z,1528897235.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:35.413Z,1528897235.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:35.800Z,1528897235.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:36.199Z,1528897236.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:36.599Z,1528897236.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:37.002Z,1528897237.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:37.402Z,1528897237.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:37.799Z,1528897237.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:38.194Z,1528897238.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:38.602Z,1528897238.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:39.005Z,1528897239.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:39.390Z,1528897239.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:39.803Z,1528897239.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:40.212Z,1528897240.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:40.612Z,1528897240.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:40.984Z,1528897240.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:41.384Z,1528897241.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:41.784Z,1528897241.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:42.180Z,1528897242.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:42.615Z,1528897242.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:42.995Z,1528897242.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:43.392Z,1528897243.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:43.788Z,1528897243.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:44.188Z,1528897244.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:44.583Z,1528897244.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:44.988Z,1528897244.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:45.386Z,1528897245.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:45.792Z,1528897245.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:46.196Z,1528897246.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:46.595Z,1528897246.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:46.986Z,1528897246.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:47.385Z,1528897247.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:47.799Z,1528897247.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:48.185Z,1528897248.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:48.596Z,1528897248.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:48.000Z,1528897249.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:49.391Z,1528897249.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:49.787Z,1528897249.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:50.188Z,1528897250.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:50.584Z,1528897250.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:50.999Z,1528897250.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:51.413Z,1528897251.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:51.796Z,1528897251.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:52.195Z,1528897252.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:52.595Z,1528897252.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:52.985Z,1528897252.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:53.387Z,1528897253.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:53.789Z,1528897253.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:54.184Z,1528897254.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:54.596Z,1528897254.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:54.996Z,1528897254.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:55.391Z,1528897255.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:55.790Z,1528897255.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:56.187Z,1528897256.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:56.584Z,1528897256.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:56.988Z,1528897256.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:57.400Z,1528897257.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:57.793Z,1528897257.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:58.195Z,1528897258.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:58.595Z,1528897258.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:58.998Z,1528897258.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:59.388Z,1528897259.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:40:59.790Z,1528897259.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:00.184Z,1528897260.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:00.595Z,1528897260.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:00.995Z,1528897260.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:01.392Z,1528897261.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:01.787Z,1528897261.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:02.188Z,1528897262.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:02.586Z,1528897262.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:02.989Z,1528897262.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:03.405Z,1528897263.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:03.796Z,1528897263.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:04.195Z,1528897264.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:04.598Z,1528897264.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:04.984Z,1528897264.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:05.388Z,1528897265.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:05.792Z,1528897265.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:06.184Z,1528897266.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:06.601Z,1528897266.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:07.001Z,1528897267.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:07.396Z,1528897267.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:07.788Z,1528897267.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:08.188Z,1528897268.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:08.592Z,1528897268.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:08.989Z,1528897268.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:09.392Z,1528897269.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:09.743Z,1528897269.743 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T13:41:09.743Z,1528897269.743 [NAL9602] Data Fault, FailCount= 1
2018-06-13T13:41:09.743Z,1528897269.743 [NAL9602](ERROR): Data Fault
2018-06-13T13:41:09.805Z,1528897269.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:09.893Z,1528897269.893 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T13:41:10.146Z,1528897270.146 [NAL9602](INFO): Powering down
2018-06-13T13:41:10.194Z,1528897270.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:10.590Z,1528897270.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:10.983Z,1528897270.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:11.067Z,1528897271.067 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T13:41:11.067Z,1528897271.067 [NAL9602] No Fault, FailCount= 1
2018-06-13T13:41:11.387Z,1528897271.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:11.792Z,1528897271.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:12.188Z,1528897272.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:12.598Z,1528897272.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:13.001Z,1528897273.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:13.376Z,1528897273.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:13.805Z,1528897273.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:14.181Z,1528897274.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:14.580Z,1528897274.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:14.988Z,1528897274.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:15.384Z,1528897275.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:15.779Z,1528897275.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:16.192Z,1528897276.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:16.583Z,1528897276.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:16.982Z,1528897276.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:17.384Z,1528897277.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:17.782Z,1528897277.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:18.182Z,1528897278.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:18.584Z,1528897278.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:18.989Z,1528897278.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:19.381Z,1528897279.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:19.783Z,1528897279.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:20.182Z,1528897280.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:20.582Z,1528897280.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:20.986Z,1528897280.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:21.382Z,1528897281.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:21.782Z,1528897281.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:22.186Z,1528897282.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:22.581Z,1528897282.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:22.982Z,1528897282.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:23.385Z,1528897283.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:23.782Z,1528897283.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:24.182Z,1528897284.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:24.586Z,1528897284.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:24.988Z,1528897284.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:25.382Z,1528897285.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:25.787Z,1528897285.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:26.182Z,1528897286.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:26.582Z,1528897286.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:26.986Z,1528897286.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:27.381Z,1528897287.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:27.783Z,1528897287.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:28.187Z,1528897288.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:28.586Z,1528897288.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:28.986Z,1528897288.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:29.387Z,1528897289.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:29.785Z,1528897289.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:30.185Z,1528897290.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:30.586Z,1528897290.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:30.984Z,1528897290.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:31.387Z,1528897291.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:31.787Z,1528897291.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:32.184Z,1528897292.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:35.286Z,1528897295.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:35.436Z,1528897295.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:35.827Z,1528897295.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:36.232Z,1528897296.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:36.630Z,1528897296.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:37.027Z,1528897297.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:37.426Z,1528897297.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:37.828Z,1528897297.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:38.227Z,1528897298.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:38.627Z,1528897298.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:39.028Z,1528897299.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:39.427Z,1528897299.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:39.828Z,1528897299.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:40.178Z,1528897300.178 [NAL9602](INFO): Powering up NAL9602
2018-06-13T13:41:40.236Z,1528897300.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:40.608Z,1528897300.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:41.032Z,1528897301.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:41.414Z,1528897301.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:41.816Z,1528897301.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:42.217Z,1528897302.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:42.613Z,1528897302.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:43.013Z,1528897303.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:43.418Z,1528897303.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:43.816Z,1528897303.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:44.216Z,1528897304.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:44.616Z,1528897304.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:45.016Z,1528897305.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:45.412Z,1528897305.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:45.816Z,1528897305.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:46.218Z,1528897306.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:46.611Z,1528897306.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:47.016Z,1528897307.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:47.416Z,1528897307.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:47.815Z,1528897307.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:48.217Z,1528897308.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:48.616Z,1528897308.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:49.012Z,1528897309.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:49.416Z,1528897309.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:49.816Z,1528897309.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:50.211Z,1528897310.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:50.616Z,1528897310.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:51.044Z,1528897311.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:51.382Z,1528897311.382 [NAL9602](INFO): NAL9602 initialized
2018-06-13T13:41:51.418Z,1528897311.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:51.819Z,1528897311.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:52.232Z,1528897312.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:52.628Z,1528897312.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:53.024Z,1528897313.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:53.419Z,1528897313.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:53.828Z,1528897313.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:54.219Z,1528897314.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:54.633Z,1528897314.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:55.028Z,1528897315.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:55.436Z,1528897315.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:55.836Z,1528897315.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:56.221Z,1528897316.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:56.619Z,1528897316.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:57.023Z,1528897317.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:57.425Z,1528897317.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:57.822Z,1528897317.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:58.230Z,1528897318.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:58.630Z,1528897318.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:59.029Z,1528897319.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:59.423Z,1528897319.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:41:59.832Z,1528897319.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:00.227Z,1528897320.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:00.624Z,1528897320.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:01.030Z,1528897321.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:01.430Z,1528897321.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:01.835Z,1528897321.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:02.224Z,1528897322.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:02.620Z,1528897322.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:03.023Z,1528897323.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:03.425Z,1528897323.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:03.820Z,1528897323.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:04.234Z,1528897324.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:04.634Z,1528897324.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:05.032Z,1528897325.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:05.425Z,1528897325.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:05.823Z,1528897325.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:06.223Z,1528897326.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:06.627Z,1528897326.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:07.033Z,1528897327.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:07.433Z,1528897327.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:07.835Z,1528897327.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:08.227Z,1528897328.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:08.620Z,1528897328.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:09.023Z,1528897329.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:09.425Z,1528897329.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:09.819Z,1528897329.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:10.240Z,1528897330.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:10.633Z,1528897330.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:11.030Z,1528897331.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:11.429Z,1528897331.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:11.828Z,1528897331.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:12.233Z,1528897332.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:12.631Z,1528897332.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:13.030Z,1528897333.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:13.430Z,1528897333.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:13.839Z,1528897333.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:14.226Z,1528897334.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:14.624Z,1528897334.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:15.025Z,1528897335.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:15.428Z,1528897335.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:15.826Z,1528897335.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:16.244Z,1528897336.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:16.634Z,1528897336.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:17.034Z,1528897337.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:17.426Z,1528897337.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:17.832Z,1528897337.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:18.232Z,1528897338.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:18.627Z,1528897338.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:19.044Z,1528897339.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:19.433Z,1528897339.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:19.845Z,1528897339.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:20.233Z,1528897340.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:20.625Z,1528897340.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:21.036Z,1528897341.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:21.443Z,1528897341.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:21.811Z,1528897341.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:22.248Z,1528897342.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:22.637Z,1528897342.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:23.037Z,1528897343.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:23.433Z,1528897343.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:23.839Z,1528897343.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:24.222Z,1528897344.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:24.624Z,1528897344.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:25.045Z,1528897345.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:25.432Z,1528897345.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:25.831Z,1528897345.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:26.221Z,1528897346.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:26.623Z,1528897346.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:27.028Z,1528897347.028 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:27.028Z,1528897347.028 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 205
2018-06-13T13:42:27.028Z,1528897347.028 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:42:27.030Z,1528897347.030 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:27.030Z,1528897347.030 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 205
2018-06-13T13:42:27.030Z,1528897347.030 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:42:27.032Z,1528897347.032 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:27.032Z,1528897347.032 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 205
2018-06-13T13:42:27.032Z,1528897347.032 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:42:27.133Z,1528897347.133 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:42:27.133Z,1528897347.133 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:42:27.133Z,1528897347.133 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:42:27.497Z,1528897347.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:42:27.497Z,1528897347.497 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 205
2018-06-13T13:42:27.498Z,1528897347.498 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:42:27.498Z,1528897347.498 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 205
2018-06-13T13:42:27.498Z,1528897347.498 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:42:27.499Z,1528897347.499 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 205
2018-06-13T13:42:27.818Z,1528897347.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:42:27.819Z,1528897347.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:42:27.819Z,1528897347.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:42:27.819Z,1528897347.819 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:42:27.820Z,1528897347.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:42:27.820Z,1528897347.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:42:27.820Z,1528897347.820 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:42:27.821Z,1528897347.821 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:42:27.821Z,1528897347.821 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:42:28.240Z,1528897348.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:42:28.241Z,1528897348.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:28.640Z,1528897348.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:42:28.641Z,1528897348.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:31.736Z,1528897351.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2018-06-13T13:42:31.737Z,1528897351.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:31.888Z,1528897351.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T13:42:31.889Z,1528897351.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:32.281Z,1528897352.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T13:42:32.282Z,1528897352.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:32.682Z,1528897352.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T13:42:32.683Z,1528897352.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:33.090Z,1528897353.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T13:42:33.091Z,1528897353.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:33.491Z,1528897353.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T13:42:33.492Z,1528897353.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:33.891Z,1528897353.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T13:42:33.892Z,1528897353.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:34.281Z,1528897354.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T13:42:34.282Z,1528897354.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:34.683Z,1528897354.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T13:42:34.684Z,1528897354.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:35.079Z,1528897355.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T13:42:35.080Z,1528897355.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:35.483Z,1528897355.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T13:42:35.484Z,1528897355.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:35.891Z,1528897355.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T13:42:35.892Z,1528897355.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:36.290Z,1528897356.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T13:42:36.291Z,1528897356.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:36.696Z,1528897356.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T13:42:36.713Z,1528897356.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:37.092Z,1528897357.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T13:42:37.093Z,1528897357.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:37.479Z,1528897357.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T13:42:37.480Z,1528897357.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:37.883Z,1528897357.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T13:42:37.884Z,1528897357.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:38.283Z,1528897358.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T13:42:38.284Z,1528897358.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:38.683Z,1528897358.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T13:42:38.684Z,1528897358.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:39.090Z,1528897359.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T13:42:39.091Z,1528897359.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:39.491Z,1528897359.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T13:42:39.492Z,1528897359.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:39.889Z,1528897359.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T13:42:39.890Z,1528897359.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:40.286Z,1528897360.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T13:42:40.287Z,1528897360.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:40.695Z,1528897360.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T13:42:40.696Z,1528897360.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:41.080Z,1528897361.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T13:42:41.081Z,1528897361.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:41.494Z,1528897361.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T13:42:41.494Z,1528897361.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:41.883Z,1528897361.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T13:42:41.884Z,1528897361.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:42.293Z,1528897362.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T13:42:42.294Z,1528897362.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:42.694Z,1528897362.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T13:42:42.695Z,1528897362.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:43.092Z,1528897363.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T13:42:43.093Z,1528897363.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:43.485Z,1528897363.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T13:42:43.486Z,1528897363.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:43.890Z,1528897363.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T13:42:43.891Z,1528897363.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:44.284Z,1528897364.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T13:42:44.285Z,1528897364.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:44.685Z,1528897364.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T13:42:44.686Z,1528897364.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:45.096Z,1528897365.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T13:42:45.097Z,1528897365.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:45.500Z,1528897365.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T13:42:45.501Z,1528897365.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:45.892Z,1528897365.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T13:42:45.893Z,1528897365.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:46.284Z,1528897366.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T13:42:46.285Z,1528897366.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:46.684Z,1528897366.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T13:42:46.686Z,1528897366.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:47.084Z,1528897367.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:47.483Z,1528897367.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:47.882Z,1528897367.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:48.294Z,1528897368.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:48.696Z,1528897368.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:49.092Z,1528897369.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:49.483Z,1528897369.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:49.886Z,1528897369.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:50.283Z,1528897370.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:50.683Z,1528897370.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:51.096Z,1528897371.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:51.492Z,1528897371.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:51.892Z,1528897371.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:52.282Z,1528897372.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:52.682Z,1528897372.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:53.083Z,1528897373.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:53.485Z,1528897373.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:53.887Z,1528897373.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:54.292Z,1528897374.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:54.693Z,1528897374.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:55.096Z,1528897375.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:55.483Z,1528897375.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:55.884Z,1528897375.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:56.287Z,1528897376.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:56.682Z,1528897376.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:57.097Z,1528897377.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:57.495Z,1528897377.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:57.896Z,1528897377.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:58.286Z,1528897378.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:58.687Z,1528897378.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:59.083Z,1528897379.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:59.495Z,1528897379.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:42:59.887Z,1528897379.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:00.299Z,1528897380.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:00.704Z,1528897380.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:01.097Z,1528897381.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:01.484Z,1528897381.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:01.886Z,1528897381.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:02.292Z,1528897382.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:02.696Z,1528897382.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:03.096Z,1528897383.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:03.496Z,1528897383.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:03.899Z,1528897383.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:04.289Z,1528897384.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:04.700Z,1528897384.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:05.084Z,1528897385.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:05.495Z,1528897385.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:05.892Z,1528897385.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:06.316Z,1528897386.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:06.700Z,1528897386.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:07.108Z,1528897387.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:07.503Z,1528897387.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:07.894Z,1528897387.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:08.296Z,1528897388.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:08.696Z,1528897388.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:09.100Z,1528897389.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:09.516Z,1528897389.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:09.898Z,1528897389.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:10.292Z,1528897390.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:10.704Z,1528897390.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:11.090Z,1528897391.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:11.497Z,1528897391.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:11.883Z,1528897391.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:12.309Z,1528897392.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:12.709Z,1528897392.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:13.113Z,1528897393.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:13.483Z,1528897393.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:13.911Z,1528897393.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:14.286Z,1528897394.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:14.682Z,1528897394.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:15.112Z,1528897395.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:15.515Z,1528897395.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:15.916Z,1528897395.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:16.286Z,1528897396.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:16.684Z,1528897396.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:17.112Z,1528897397.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:17.489Z,1528897397.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:17.887Z,1528897397.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:18.290Z,1528897398.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:18.715Z,1528897398.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:19.119Z,1528897399.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:19.500Z,1528897399.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:19.915Z,1528897399.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:20.318Z,1528897400.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:20.689Z,1528897400.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:21.093Z,1528897401.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:21.492Z,1528897401.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:21.914Z,1528897401.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:22.292Z,1528897402.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:22.691Z,1528897402.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:23.085Z,1528897403.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:23.517Z,1528897403.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:23.892Z,1528897403.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:24.296Z,1528897404.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:24.694Z,1528897404.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:25.118Z,1528897405.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:25.479Z,1528897405.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:25.891Z,1528897405.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:26.287Z,1528897406.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:26.698Z,1528897406.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:27.098Z,1528897407.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:27.495Z,1528897407.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:27.893Z,1528897407.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:28.320Z,1528897408.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:28.323Z,1528897408.323 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T13:43:28.323Z,1528897408.323 [Default:CheckIn:C.Wait] Stopped
2018-06-13T13:43:28.323Z,1528897408.323 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T13:43:28.324Z,1528897408.324 [Default:CheckIn:D] Running Loop=1
2018-06-13T13:43:28.685Z,1528897408.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:28.688Z,1528897408.688 [Default:CheckIn:D] Stopped
2018-06-13T13:43:28.688Z,1528897408.688 [Default:CheckIn:E] Running Loop=1
2018-06-13T13:43:31.793Z,1528897411.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:31.797Z,1528897411.797 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 616.254036 min 
2018-06-13T13:43:31.798Z,1528897411.798 [Default:CheckIn:E] Stopped
2018-06-13T13:43:31.798Z,1528897411.798 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T13:43:31.798Z,1528897411.798 [Default:CheckIn] Stopped
2018-06-13T13:43:31.798Z,1528897411.798 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T13:43:31.798Z,1528897411.798 [Default:CheckIn](INFO): Running loop #60
2018-06-13T13:43:31.798Z,1528897411.798 [Default:CheckIn] Running Loop=60
2018-06-13T13:43:31.798Z,1528897411.798 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T13:43:31.798Z,1528897411.798 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T13:43:31.950Z,1528897411.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:32.372Z,1528897412.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:32.751Z,1528897412.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:33.148Z,1528897413.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:33.544Z,1528897413.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:33.943Z,1528897413.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:34.342Z,1528897414.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:34.747Z,1528897414.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:35.147Z,1528897415.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:35.555Z,1528897415.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:35.948Z,1528897415.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:36.344Z,1528897416.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:36.758Z,1528897416.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:37.148Z,1528897417.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:37.545Z,1528897417.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:37.952Z,1528897417.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:38.360Z,1528897418.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:38.758Z,1528897418.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:39.160Z,1528897419.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:39.556Z,1528897419.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:39.944Z,1528897419.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:40.346Z,1528897420.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:40.747Z,1528897420.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:41.164Z,1528897421.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:41.564Z,1528897421.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:41.960Z,1528897421.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:42.346Z,1528897422.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:42.756Z,1528897422.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:43.152Z,1528897423.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:43.553Z,1528897423.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:43.948Z,1528897423.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:44.357Z,1528897424.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:44.756Z,1528897424.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:45.155Z,1528897425.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:45.549Z,1528897425.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:45.964Z,1528897425.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:46.364Z,1528897426.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:46.748Z,1528897426.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:47.158Z,1528897427.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:47.561Z,1528897427.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:47.956Z,1528897427.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:48.357Z,1528897428.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:48.748Z,1528897428.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:49.161Z,1528897429.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:49.564Z,1528897429.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:49.948Z,1528897429.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:50.357Z,1528897430.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:50.761Z,1528897430.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:51.162Z,1528897431.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:51.551Z,1528897431.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:51.949Z,1528897431.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:52.367Z,1528897432.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:52.756Z,1528897432.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:53.162Z,1528897433.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:53.559Z,1528897433.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:53.976Z,1528897433.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:54.368Z,1528897434.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:54.750Z,1528897434.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:55.150Z,1528897435.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:55.564Z,1528897435.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:55.949Z,1528897435.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:56.357Z,1528897436.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:56.764Z,1528897436.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:57.168Z,1528897437.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:57.559Z,1528897437.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:57.951Z,1528897437.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:58.349Z,1528897438.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:58.757Z,1528897438.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:59.162Z,1528897439.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:59.560Z,1528897439.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:43:59.957Z,1528897439.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:00.352Z,1528897440.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:00.757Z,1528897440.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:01.160Z,1528897441.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:01.551Z,1528897441.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:01.955Z,1528897441.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:02.358Z,1528897442.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:02.761Z,1528897442.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:03.156Z,1528897443.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:03.552Z,1528897443.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:03.956Z,1528897443.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:04.362Z,1528897444.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:04.760Z,1528897444.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:05.176Z,1528897445.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:05.561Z,1528897445.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:05.963Z,1528897445.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:06.354Z,1528897446.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:06.750Z,1528897446.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:07.163Z,1528897447.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:07.555Z,1528897447.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:07.956Z,1528897447.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:08.374Z,1528897448.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:08.768Z,1528897448.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:09.179Z,1528897449.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:09.564Z,1528897449.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:09.940Z,1528897449.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:10.340Z,1528897450.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:10.740Z,1528897450.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:11.172Z,1528897451.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:11.579Z,1528897451.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:11.948Z,1528897451.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:12.343Z,1528897452.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:12.747Z,1528897452.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:13.143Z,1528897453.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:13.539Z,1528897453.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:13.944Z,1528897453.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:14.354Z,1528897454.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:14.748Z,1528897454.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:15.152Z,1528897455.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:15.544Z,1528897455.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:15.939Z,1528897455.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:16.344Z,1528897456.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:16.742Z,1528897456.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:17.149Z,1528897457.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:17.556Z,1528897457.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:17.952Z,1528897457.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:18.339Z,1528897458.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:18.743Z,1528897458.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:19.145Z,1528897459.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:19.540Z,1528897459.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:19.944Z,1528897459.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:20.352Z,1528897460.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:20.748Z,1528897460.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:21.148Z,1528897461.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:21.543Z,1528897461.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:21.940Z,1528897461.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:22.343Z,1528897462.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:22.745Z,1528897462.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:23.152Z,1528897463.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:23.551Z,1528897463.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:23.951Z,1528897463.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:24.340Z,1528897464.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:24.744Z,1528897464.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:25.146Z,1528897465.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:25.553Z,1528897465.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:25.955Z,1528897465.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:26.366Z,1528897466.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:26.755Z,1528897466.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:27.153Z,1528897467.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:27.556Z,1528897467.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:27.942Z,1528897467.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:28.353Z,1528897468.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:28.754Z,1528897468.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:29.162Z,1528897469.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:29.561Z,1528897469.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:29.967Z,1528897469.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:30.354Z,1528897470.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:30.754Z,1528897470.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:31.156Z,1528897471.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:31.555Z,1528897471.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:31.954Z,1528897471.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:32.358Z,1528897472.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:35.476Z,1528897475.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:35.650Z,1528897475.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:36.029Z,1528897476.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:36.431Z,1528897476.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:36.828Z,1528897476.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:37.253Z,1528897477.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:37.642Z,1528897477.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:38.057Z,1528897478.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:38.429Z,1528897478.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:38.851Z,1528897478.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:39.248Z,1528897479.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:39.628Z,1528897479.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:40.026Z,1528897480.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:40.454Z,1528897480.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:40.855Z,1528897480.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:41.252Z,1528897481.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:41.627Z,1528897481.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:42.056Z,1528897482.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:42.449Z,1528897482.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:42.827Z,1528897482.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:43.255Z,1528897483.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:43.639Z,1528897483.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:44.034Z,1528897484.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:44.428Z,1528897484.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:44.827Z,1528897484.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:45.254Z,1528897485.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:45.632Z,1528897485.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:46.026Z,1528897486.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:46.459Z,1528897486.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:46.863Z,1528897486.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:47.259Z,1528897487.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:47.636Z,1528897487.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:48.030Z,1528897488.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:48.440Z,1528897488.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:48.831Z,1528897488.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:49.240Z,1528897489.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:49.638Z,1528897489.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:50.059Z,1528897490.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:50.435Z,1528897490.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:50.832Z,1528897490.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:51.236Z,1528897491.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:51.652Z,1528897491.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:52.030Z,1528897492.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:52.438Z,1528897492.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:52.838Z,1528897492.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:53.256Z,1528897493.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:53.632Z,1528897493.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:54.036Z,1528897494.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:54.430Z,1528897494.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:54.852Z,1528897494.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:55.238Z,1528897495.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:55.639Z,1528897495.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:56.034Z,1528897496.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:56.458Z,1528897496.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:56.831Z,1528897496.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:57.233Z,1528897497.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:57.634Z,1528897497.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:58.025Z,1528897498.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:58.441Z,1528897498.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:58.841Z,1528897498.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:59.241Z,1528897499.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:44:59.663Z,1528897499.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:00.034Z,1528897500.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:00.427Z,1528897500.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:00.833Z,1528897500.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:01.266Z,1528897501.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:01.640Z,1528897501.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:02.041Z,1528897502.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:02.431Z,1528897502.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:02.823Z,1528897502.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:03.224Z,1528897503.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:03.637Z,1528897503.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:04.040Z,1528897504.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:04.438Z,1528897504.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:04.845Z,1528897504.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:05.242Z,1528897505.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:05.633Z,1528897505.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:06.036Z,1528897506.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:06.426Z,1528897506.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:06.834Z,1528897506.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:07.242Z,1528897507.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:07.637Z,1528897507.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:08.042Z,1528897508.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:08.444Z,1528897508.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:08.846Z,1528897508.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:09.228Z,1528897509.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:09.631Z,1528897509.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:10.029Z,1528897510.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:10.442Z,1528897510.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:10.854Z,1528897510.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:11.239Z,1528897511.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:11.634Z,1528897511.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:12.034Z,1528897512.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:12.433Z,1528897512.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:12.839Z,1528897512.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:13.255Z,1528897513.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:13.648Z,1528897513.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:14.044Z,1528897514.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:14.433Z,1528897514.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:14.838Z,1528897514.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:15.221Z,1528897515.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:15.627Z,1528897515.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:16.019Z,1528897516.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:16.458Z,1528897516.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:16.859Z,1528897516.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:17.251Z,1528897517.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:17.624Z,1528897517.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:18.028Z,1528897518.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:18.424Z,1528897518.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:18.825Z,1528897518.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:19.235Z,1528897519.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:19.631Z,1528897519.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:20.031Z,1528897520.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:20.427Z,1528897520.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:20.823Z,1528897520.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:21.227Z,1528897521.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:21.626Z,1528897521.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:22.023Z,1528897522.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:22.432Z,1528897522.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:22.832Z,1528897522.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:23.233Z,1528897523.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:23.628Z,1528897523.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:24.030Z,1528897524.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:24.425Z,1528897524.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:24.828Z,1528897524.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:25.236Z,1528897525.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:25.632Z,1528897525.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:26.036Z,1528897526.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:26.436Z,1528897526.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:26.823Z,1528897526.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:27.229Z,1528897527.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:27.638Z,1528897527.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:28.024Z,1528897528.024 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:28.024Z,1528897528.024 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 206
2018-06-13T13:45:28.024Z,1528897528.024 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:45:28.026Z,1528897528.026 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:28.026Z,1528897528.026 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 206
2018-06-13T13:45:28.026Z,1528897528.026 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:45:28.027Z,1528897528.027 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:28.028Z,1528897528.028 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 206
2018-06-13T13:45:28.028Z,1528897528.028 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:45:28.105Z,1528897528.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:45:28.105Z,1528897528.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:45:28.106Z,1528897528.106 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:45:28.509Z,1528897528.509 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:45:28.509Z,1528897528.509 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 206
2018-06-13T13:45:28.510Z,1528897528.510 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:45:28.510Z,1528897528.510 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 206
2018-06-13T13:45:28.510Z,1528897528.510 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:45:28.510Z,1528897528.510 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 206
2018-06-13T13:45:28.839Z,1528897528.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:45:28.839Z,1528897528.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:45:28.839Z,1528897528.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:45:28.840Z,1528897528.840 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:45:28.840Z,1528897528.840 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:45:28.841Z,1528897528.841 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:45:28.841Z,1528897528.841 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:45:28.842Z,1528897528.842 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:45:28.842Z,1528897528.842 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:45:31.947Z,1528897531.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2018-06-13T13:45:31.948Z,1528897531.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:32.103Z,1528897532.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T13:45:32.104Z,1528897532.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:32.498Z,1528897532.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T13:45:32.499Z,1528897532.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:32.898Z,1528897532.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T13:45:32.899Z,1528897532.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:33.328Z,1528897533.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T13:45:33.329Z,1528897533.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:33.725Z,1528897533.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T13:45:33.726Z,1528897533.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:34.105Z,1528897534.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T13:45:34.106Z,1528897534.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:34.501Z,1528897534.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T13:45:34.502Z,1528897534.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:34.929Z,1528897534.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T13:45:34.930Z,1528897534.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:35.303Z,1528897535.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T13:45:35.304Z,1528897535.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:35.701Z,1528897535.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T13:45:35.702Z,1528897535.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:36.101Z,1528897536.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T13:45:36.102Z,1528897536.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:36.526Z,1528897536.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T13:45:36.526Z,1528897536.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:36.911Z,1528897536.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T13:45:36.912Z,1528897536.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:37.307Z,1528897537.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T13:45:37.307Z,1528897537.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:37.697Z,1528897537.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T13:45:37.698Z,1528897537.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:38.128Z,1528897538.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T13:45:38.129Z,1528897538.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:38.503Z,1528897538.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T13:45:38.504Z,1528897538.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:38.899Z,1528897538.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T13:45:38.900Z,1528897538.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:39.312Z,1528897539.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T13:45:39.330Z,1528897539.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:39.735Z,1528897539.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T13:45:39.736Z,1528897539.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:40.109Z,1528897540.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T13:45:40.110Z,1528897540.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:40.508Z,1528897540.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T13:45:40.514Z,1528897540.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:40.907Z,1528897540.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T13:45:40.908Z,1528897540.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:41.316Z,1528897541.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T13:45:41.317Z,1528897541.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:41.707Z,1528897541.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T13:45:41.708Z,1528897541.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:42.105Z,1528897542.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T13:45:42.106Z,1528897542.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:42.511Z,1528897542.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T13:45:42.512Z,1528897542.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:42.938Z,1528897542.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T13:45:42.938Z,1528897542.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:43.319Z,1528897543.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T13:45:43.320Z,1528897543.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:43.704Z,1528897543.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T13:45:43.705Z,1528897543.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:44.106Z,1528897544.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T13:45:44.107Z,1528897544.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:44.511Z,1528897544.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T13:45:44.513Z,1528897544.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:44.900Z,1528897544.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T13:45:44.902Z,1528897544.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:45.314Z,1528897545.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T13:45:45.315Z,1528897545.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:45.714Z,1528897545.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T13:45:45.715Z,1528897545.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:46.138Z,1528897546.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T13:45:46.139Z,1528897546.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:46.498Z,1528897546.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T13:45:46.499Z,1528897546.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:46.904Z,1528897546.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T13:45:46.905Z,1528897546.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:47.301Z,1528897547.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T13:45:47.302Z,1528897547.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:47.701Z,1528897547.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T13:45:47.702Z,1528897547.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:48.104Z,1528897548.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:48.513Z,1528897548.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:48.915Z,1528897548.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:49.342Z,1528897549.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:49.700Z,1528897549.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:50.103Z,1528897550.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:50.504Z,1528897550.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:50.900Z,1528897550.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:51.308Z,1528897551.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:51.717Z,1528897551.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:52.114Z,1528897552.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:52.516Z,1528897552.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:52.904Z,1528897552.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:53.299Z,1528897553.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:53.707Z,1528897553.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:54.098Z,1528897554.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:54.513Z,1528897554.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:54.916Z,1528897554.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:55.320Z,1528897555.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:55.700Z,1528897555.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:56.100Z,1528897556.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:56.500Z,1528897556.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:56.901Z,1528897556.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:57.308Z,1528897557.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:57.711Z,1528897557.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:58.110Z,1528897558.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:58.503Z,1528897558.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:58.908Z,1528897558.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:59.301Z,1528897559.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:45:59.704Z,1528897559.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:00.105Z,1528897560.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:00.513Z,1528897560.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:00.912Z,1528897560.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:01.312Z,1528897561.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:01.700Z,1528897561.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:02.101Z,1528897562.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:02.499Z,1528897562.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:02.900Z,1528897562.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:03.319Z,1528897563.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:03.711Z,1528897563.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:04.114Z,1528897564.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:04.500Z,1528897564.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:04.875Z,1528897564.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:04.909Z,1528897564.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:05.275Z,1528897565.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:05.304Z,1528897565.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:05.676Z,1528897565.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:05.711Z,1528897565.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:06.108Z,1528897566.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:06.514Z,1528897566.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:06.912Z,1528897566.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:07.309Z,1528897567.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:07.701Z,1528897567.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:08.108Z,1528897568.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:08.510Z,1528897568.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:08.901Z,1528897568.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:09.313Z,1528897569.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:09.713Z,1528897569.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:10.115Z,1528897570.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:10.500Z,1528897570.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:10.906Z,1528897570.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:11.306Z,1528897571.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:11.701Z,1528897571.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:12.108Z,1528897572.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:12.514Z,1528897572.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:12.912Z,1528897572.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:13.313Z,1528897573.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:13.701Z,1528897573.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:14.100Z,1528897574.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:14.503Z,1528897574.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:14.902Z,1528897574.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:15.316Z,1528897575.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:15.720Z,1528897575.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:16.114Z,1528897576.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:16.500Z,1528897576.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:16.907Z,1528897576.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:17.301Z,1528897577.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:17.703Z,1528897577.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:18.103Z,1528897578.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:18.515Z,1528897578.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:18.913Z,1528897578.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:19.319Z,1528897579.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:19.705Z,1528897579.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:20.112Z,1528897580.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:20.514Z,1528897580.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:20.892Z,1528897580.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:21.322Z,1528897581.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:21.730Z,1528897581.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:22.124Z,1528897582.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:22.510Z,1528897582.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:22.906Z,1528897582.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:23.317Z,1528897583.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:23.711Z,1528897583.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:24.112Z,1528897584.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:24.512Z,1528897584.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:24.906Z,1528897584.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:25.314Z,1528897585.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:25.710Z,1528897585.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:26.109Z,1528897586.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:26.507Z,1528897586.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:26.906Z,1528897586.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:27.313Z,1528897587.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:27.713Z,1528897587.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:28.110Z,1528897588.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:28.505Z,1528897588.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:28.911Z,1528897588.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:29.311Z,1528897589.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:29.711Z,1528897589.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:30.110Z,1528897590.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:30.510Z,1528897590.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:30.905Z,1528897590.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:31.310Z,1528897591.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:31.710Z,1528897591.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:32.116Z,1528897592.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:32.507Z,1528897592.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:32.905Z,1528897592.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:33.312Z,1528897593.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:36.435Z,1528897596.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:36.617Z,1528897596.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:37.003Z,1528897597.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:37.416Z,1528897597.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:37.809Z,1528897597.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:38.208Z,1528897598.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:38.592Z,1528897598.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:38.616Z,1528897598.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:38.991Z,1528897598.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:39.014Z,1528897599.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:39.382Z,1528897599.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:39.424Z,1528897599.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:39.771Z,1528897599.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:39.806Z,1528897599.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:40.167Z,1528897600.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:40.208Z,1528897600.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:40.572Z,1528897600.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:40.615Z,1528897600.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:40.971Z,1528897600.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:41.004Z,1528897601.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:41.378Z,1528897601.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:41.411Z,1528897601.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:41.787Z,1528897601.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:41.815Z,1528897601.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:42.185Z,1528897602.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:42.220Z,1528897602.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:42.571Z,1528897602.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:42.623Z,1528897602.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:42.971Z,1528897602.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:43.009Z,1528897603.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:43.372Z,1528897603.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:43.415Z,1528897603.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:43.776Z,1528897603.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:43.831Z,1528897603.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:44.175Z,1528897604.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:44.196Z,1528897604.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:44.622Z,1528897604.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:45.021Z,1528897605.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:45.428Z,1528897605.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:45.775Z,1528897605.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:45.792Z,1528897605.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:46.172Z,1528897606.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:46.196Z,1528897606.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:46.574Z,1528897606.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:46.598Z,1528897606.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:46.977Z,1528897606.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:47.028Z,1528897607.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:47.385Z,1528897607.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:47.428Z,1528897607.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:47.785Z,1528897607.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:47.824Z,1528897607.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:48.188Z,1528897608.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:48.207Z,1528897608.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:48.571Z,1528897608.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:48.629Z,1528897608.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:48.978Z,1528897608.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:48.996Z,1528897608.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:49.378Z,1528897609.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:49.402Z,1528897609.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:49.779Z,1528897609.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:49.802Z,1528897609.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:50.175Z,1528897610.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:50.229Z,1528897610.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:50.586Z,1528897610.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:50.608Z,1528897610.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:50.987Z,1528897610.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:51.010Z,1528897611.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:51.389Z,1528897611.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:51.435Z,1528897611.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:51.778Z,1528897611.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:51.812Z,1528897611.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:52.177Z,1528897612.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:52.195Z,1528897612.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:52.575Z,1528897612.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:52.604Z,1528897612.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:52.975Z,1528897612.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:53.006Z,1528897613.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:53.386Z,1528897613.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:53.404Z,1528897613.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:53.786Z,1528897613.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:53.805Z,1528897613.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:54.187Z,1528897614.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:54.229Z,1528897614.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:54.577Z,1528897614.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:54.600Z,1528897614.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:54.975Z,1528897614.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:54.998Z,1528897614.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:55.378Z,1528897615.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:55.396Z,1528897615.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:55.772Z,1528897615.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:55.825Z,1528897615.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:56.175Z,1528897616.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:56.207Z,1528897616.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:56.587Z,1528897616.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:56.606Z,1528897616.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:56.990Z,1528897616.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:57.008Z,1528897617.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:57.387Z,1528897617.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:57.410Z,1528897617.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:57.778Z,1528897617.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:57.807Z,1528897617.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:58.167Z,1528897618.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:58.204Z,1528897618.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:58.575Z,1528897618.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:58.609Z,1528897618.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:58.967Z,1528897618.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:59.002Z,1528897619.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:59.387Z,1528897619.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:59.411Z,1528897619.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:46:59.791Z,1528897619.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:46:59.810Z,1528897619.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:00.192Z,1528897620.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:00.212Z,1528897620.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:00.571Z,1528897620.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:00.599Z,1528897620.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:00.971Z,1528897620.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:00.999Z,1528897620.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:01.371Z,1528897621.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:01.410Z,1528897621.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:01.772Z,1528897621.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:01.809Z,1528897621.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:02.171Z,1528897622.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:02.205Z,1528897622.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:02.586Z,1528897622.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:02.621Z,1528897622.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:02.985Z,1528897622.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:03.014Z,1528897623.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:03.381Z,1528897623.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:03.426Z,1528897623.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:03.772Z,1528897623.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:03.817Z,1528897623.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:04.168Z,1528897624.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:04.194Z,1528897624.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:04.573Z,1528897624.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:04.599Z,1528897624.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:04.972Z,1528897624.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:04.998Z,1528897624.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:05.379Z,1528897625.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:05.406Z,1528897625.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:05.786Z,1528897625.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:05.816Z,1528897625.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:06.199Z,1528897626.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:06.225Z,1528897626.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:06.567Z,1528897626.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:06.590Z,1528897626.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:06.974Z,1528897626.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:07.005Z,1528897627.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:07.378Z,1528897627.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:07.398Z,1528897627.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:07.774Z,1528897627.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:07.791Z,1528897627.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:08.175Z,1528897628.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:08.206Z,1528897628.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:08.587Z,1528897628.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:08.606Z,1528897628.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:08.986Z,1528897628.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:09.004Z,1528897629.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:09.386Z,1528897629.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:09.405Z,1528897629.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:09.778Z,1528897629.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:09.796Z,1528897629.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:10.167Z,1528897630.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:10.204Z,1528897630.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:10.575Z,1528897630.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:10.609Z,1528897630.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:10.971Z,1528897630.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:11.012Z,1528897631.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:11.387Z,1528897631.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:11.406Z,1528897631.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:11.791Z,1528897631.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:11.809Z,1528897631.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:12.193Z,1528897632.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:12.213Z,1528897632.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:12.567Z,1528897632.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:12.604Z,1528897632.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:12.971Z,1528897632.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:13.013Z,1528897633.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:13.371Z,1528897633.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:13.402Z,1528897633.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:13.772Z,1528897633.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:13.806Z,1528897633.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:14.171Z,1528897634.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:14.188Z,1528897634.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:14.589Z,1528897634.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:14.619Z,1528897634.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:14.989Z,1528897634.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:15.018Z,1528897635.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:15.381Z,1528897635.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:15.415Z,1528897635.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:15.771Z,1528897635.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:15.789Z,1528897635.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:16.171Z,1528897636.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:16.196Z,1528897636.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:16.575Z,1528897636.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:16.592Z,1528897636.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:16.975Z,1528897636.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:16.993Z,1528897636.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:17.378Z,1528897637.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:17.396Z,1528897637.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:17.785Z,1528897637.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:17.803Z,1528897637.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:18.185Z,1528897638.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:18.204Z,1528897638.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:18.577Z,1528897638.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:18.595Z,1528897638.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:18.975Z,1528897638.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:19.012Z,1528897639.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:19.378Z,1528897639.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:19.396Z,1528897639.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:19.778Z,1528897639.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:19.796Z,1528897639.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:20.175Z,1528897640.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:20.198Z,1528897640.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:20.585Z,1528897640.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:20.604Z,1528897640.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:20.986Z,1528897640.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:21.005Z,1528897641.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:21.387Z,1528897641.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:21.405Z,1528897641.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:21.779Z,1528897641.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:21.798Z,1528897641.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:22.167Z,1528897642.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:22.204Z,1528897642.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:22.575Z,1528897642.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:22.606Z,1528897642.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:22.971Z,1528897642.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:23.010Z,1528897643.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:23.388Z,1528897643.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:23.406Z,1528897643.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:23.792Z,1528897643.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:23.816Z,1528897643.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:24.192Z,1528897644.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:24.216Z,1528897644.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:24.568Z,1528897644.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:24.595Z,1528897644.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:24.971Z,1528897644.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:25.013Z,1528897645.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:25.392Z,1528897645.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:25.416Z,1528897645.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:25.792Z,1528897645.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:25.811Z,1528897645.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:26.186Z,1528897646.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:26.217Z,1528897646.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:26.569Z,1528897646.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:26.600Z,1528897646.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:26.967Z,1528897646.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:27.004Z,1528897647.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:27.388Z,1528897647.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:27.406Z,1528897647.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:27.792Z,1528897647.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:27.816Z,1528897647.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:28.188Z,1528897648.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:28.207Z,1528897648.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:28.577Z,1528897648.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:28.616Z,1528897648.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:28.975Z,1528897648.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:29.012Z,1528897649.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:32.099Z,1528897652.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:32.118Z,1528897652.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:32.253Z,1528897652.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:32.294Z,1528897652.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:32.650Z,1528897652.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:32.673Z,1528897652.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:33.028Z,1528897653.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:33.074Z,1528897653.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:33.427Z,1528897653.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:33.455Z,1528897653.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:33.827Z,1528897653.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:33.858Z,1528897653.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:34.223Z,1528897654.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:34.256Z,1528897654.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:34.646Z,1528897654.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:34.669Z,1528897654.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:35.049Z,1528897655.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:35.067Z,1528897655.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:35.442Z,1528897655.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:35.480Z,1528897655.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:35.827Z,1528897655.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:35.860Z,1528897655.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:36.227Z,1528897656.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:36.267Z,1528897656.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:36.624Z,1528897656.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:36.660Z,1528897656.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:37.027Z,1528897657.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:37.060Z,1528897657.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:37.448Z,1528897657.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:37.471Z,1528897657.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:37.848Z,1528897657.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:37.871Z,1528897657.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:38.244Z,1528897658.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:38.268Z,1528897658.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:38.627Z,1528897658.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:38.668Z,1528897658.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:39.023Z,1528897659.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:39.057Z,1528897659.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:39.427Z,1528897659.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:39.471Z,1528897659.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:39.827Z,1528897659.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:39.861Z,1528897659.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:40.227Z,1528897660.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:40.268Z,1528897660.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:40.637Z,1528897660.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:40.678Z,1528897660.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:41.041Z,1528897661.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:41.083Z,1528897661.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:41.438Z,1528897661.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:41.456Z,1528897661.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:41.830Z,1528897661.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:41.848Z,1528897661.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:42.230Z,1528897662.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:42.257Z,1528897662.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:42.634Z,1528897662.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:42.652Z,1528897662.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:43.034Z,1528897663.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:43.051Z,1528897663.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:43.440Z,1528897663.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:43.458Z,1528897663.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:43.843Z,1528897663.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:43.860Z,1528897663.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:44.245Z,1528897664.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:44.291Z,1528897664.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:44.627Z,1528897664.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:44.657Z,1528897664.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:45.027Z,1528897665.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:45.055Z,1528897665.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:45.427Z,1528897665.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:45.456Z,1528897665.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:45.824Z,1528897665.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:45.864Z,1528897665.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:46.223Z,1528897666.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:46.260Z,1528897666.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:46.645Z,1528897666.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:46.663Z,1528897666.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:47.044Z,1528897667.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:47.068Z,1528897667.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:47.438Z,1528897667.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:47.462Z,1528897667.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:47.828Z,1528897667.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:47.856Z,1528897667.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:48.227Z,1528897668.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:48.263Z,1528897668.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:48.624Z,1528897668.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:48.664Z,1528897668.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:49.027Z,1528897669.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:49.066Z,1528897669.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:49.447Z,1528897669.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:49.465Z,1528897669.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:49.845Z,1528897669.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:49.863Z,1528897669.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:50.246Z,1528897670.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:50.280Z,1528897670.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:50.627Z,1528897670.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:50.669Z,1528897670.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:51.023Z,1528897671.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:51.057Z,1528897671.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:51.427Z,1528897671.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:51.444Z,1528897671.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:51.827Z,1528897671.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:51.845Z,1528897671.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:52.226Z,1528897672.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:52.244Z,1528897672.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:52.642Z,1528897672.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:52.675Z,1528897672.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:53.041Z,1528897673.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:53.076Z,1528897673.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:53.437Z,1528897673.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:53.473Z,1528897673.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:53.828Z,1528897673.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:53.846Z,1528897673.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:54.230Z,1528897674.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:54.247Z,1528897674.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:54.631Z,1528897674.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:54.649Z,1528897674.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:55.030Z,1528897675.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:55.048Z,1528897675.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:55.441Z,1528897675.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:55.482Z,1528897675.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:55.838Z,1528897675.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:55.879Z,1528897675.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:56.237Z,1528897676.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:56.276Z,1528897676.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:56.631Z,1528897676.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:56.649Z,1528897676.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:57.028Z,1528897677.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:57.046Z,1528897677.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:57.433Z,1528897677.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:57.451Z,1528897677.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:57.841Z,1528897677.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:57.858Z,1528897677.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:58.238Z,1528897678.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:58.257Z,1528897678.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:58.634Z,1528897678.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:58.652Z,1528897678.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:59.030Z,1528897679.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:59.048Z,1528897679.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:59.435Z,1528897679.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:59.454Z,1528897679.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:47:59.841Z,1528897679.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:47:59.859Z,1528897679.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:00.237Z,1528897680.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:00.260Z,1528897680.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:00.630Z,1528897680.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:00.649Z,1528897680.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:01.032Z,1528897681.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:01.050Z,1528897681.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:01.437Z,1528897681.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:01.455Z,1528897681.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:01.842Z,1528897681.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:01.859Z,1528897681.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:02.238Z,1528897682.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:02.264Z,1528897682.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:02.633Z,1528897682.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:02.651Z,1528897682.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:03.033Z,1528897683.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:03.056Z,1528897683.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:03.439Z,1528897683.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:03.464Z,1528897683.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:03.843Z,1528897683.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:03.860Z,1528897683.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:04.243Z,1528897684.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:04.260Z,1528897684.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:04.634Z,1528897684.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:04.652Z,1528897684.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:05.034Z,1528897685.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:05.051Z,1528897685.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:05.441Z,1528897685.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:05.459Z,1528897685.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:05.842Z,1528897685.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:05.864Z,1528897685.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:06.243Z,1528897686.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:06.261Z,1528897686.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:06.634Z,1528897686.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:06.652Z,1528897686.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:07.029Z,1528897687.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:07.047Z,1528897687.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:07.443Z,1528897687.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:07.462Z,1528897687.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:07.843Z,1528897687.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:07.860Z,1528897687.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:08.244Z,1528897688.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:08.262Z,1528897688.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:08.635Z,1528897688.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:08.653Z,1528897688.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:09.034Z,1528897689.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:09.056Z,1528897689.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:09.443Z,1528897689.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:09.461Z,1528897689.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:09.843Z,1528897689.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:09.868Z,1528897689.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:10.245Z,1528897690.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:10.263Z,1528897690.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:10.628Z,1528897690.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:10.654Z,1528897690.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:11.035Z,1528897691.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:11.053Z,1528897691.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:11.443Z,1528897691.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:11.461Z,1528897691.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:11.843Z,1528897691.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:11.868Z,1528897691.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:12.244Z,1528897692.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:12.268Z,1528897692.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:12.635Z,1528897692.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:12.653Z,1528897692.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:13.034Z,1528897693.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:13.052Z,1528897693.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:13.443Z,1528897693.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:13.480Z,1528897693.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:13.843Z,1528897693.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:13.861Z,1528897693.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:14.242Z,1528897694.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:14.268Z,1528897694.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:14.635Z,1528897694.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:14.653Z,1528897694.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:15.034Z,1528897695.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:15.052Z,1528897695.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:15.442Z,1528897695.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:15.461Z,1528897695.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:15.843Z,1528897695.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:15.868Z,1528897695.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:16.243Z,1528897696.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:16.261Z,1528897696.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:16.634Z,1528897696.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:16.652Z,1528897696.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:17.030Z,1528897697.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:17.054Z,1528897697.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:17.443Z,1528897697.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:17.461Z,1528897697.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:17.843Z,1528897697.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:17.868Z,1528897697.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:18.244Z,1528897698.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:18.262Z,1528897698.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:18.634Z,1528897698.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:18.656Z,1528897698.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:19.033Z,1528897699.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:19.052Z,1528897699.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:19.446Z,1528897699.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:19.468Z,1528897699.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:19.843Z,1528897699.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:19.861Z,1528897699.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:20.242Z,1528897700.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:20.268Z,1528897700.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:20.634Z,1528897700.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:20.656Z,1528897700.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:21.033Z,1528897701.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:21.056Z,1528897701.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:21.442Z,1528897701.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:21.460Z,1528897701.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:21.844Z,1528897701.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:21.868Z,1528897701.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:22.243Z,1528897702.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:22.261Z,1528897702.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:22.635Z,1528897702.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:22.653Z,1528897702.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:23.035Z,1528897703.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:23.053Z,1528897703.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:23.443Z,1528897703.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:23.461Z,1528897703.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:23.843Z,1528897703.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:23.861Z,1528897703.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:24.244Z,1528897704.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:24.268Z,1528897704.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:24.635Z,1528897704.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:24.653Z,1528897704.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:25.027Z,1528897705.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:25.057Z,1528897705.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:25.448Z,1528897705.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:25.472Z,1528897705.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:25.840Z,1528897705.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:25.859Z,1528897705.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:26.244Z,1528897706.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:26.261Z,1528897706.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:26.633Z,1528897706.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:26.658Z,1528897706.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:27.034Z,1528897707.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:27.052Z,1528897707.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:27.438Z,1528897707.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:27.472Z,1528897707.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:27.849Z,1528897707.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:27.867Z,1528897707.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:28.240Z,1528897708.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:28.259Z,1528897708.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:28.627Z,1528897708.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:28.665Z,1528897708.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:29.027Z,1528897709.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:29.064Z,1528897709.064 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:29.064Z,1528897709.064 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 207
2018-06-13T13:48:29.064Z,1528897709.064 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:48:29.066Z,1528897709.066 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:29.066Z,1528897709.066 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 207
2018-06-13T13:48:29.066Z,1528897709.066 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:48:29.068Z,1528897709.068 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:29.068Z,1528897709.068 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 207
2018-06-13T13:48:29.068Z,1528897709.068 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:48:29.145Z,1528897709.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:48:29.145Z,1528897709.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:48:29.145Z,1528897709.145 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:48:32.159Z,1528897712.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:32.178Z,1528897712.178 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T13:43:31.8Z
2018-06-13T13:48:32.178Z,1528897712.178 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T13:48:32.178Z,1528897712.178 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T13:48:32.253Z,1528897712.253 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:48:32.253Z,1528897712.253 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 207
2018-06-13T13:48:32.254Z,1528897712.254 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:48:32.254Z,1528897712.254 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 207
2018-06-13T13:48:32.254Z,1528897712.254 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:48:32.254Z,1528897712.254 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 207
2018-06-13T13:48:32.298Z,1528897712.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:32.336Z,1528897712.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:48:32.336Z,1528897712.336 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:48:32.336Z,1528897712.336 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:48:32.337Z,1528897712.337 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:48:32.337Z,1528897712.337 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:48:32.338Z,1528897712.338 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:48:32.338Z,1528897712.338 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:48:32.339Z,1528897712.339 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:48:32.339Z,1528897712.339 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:48:33.457Z,1528897713.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:33.499Z,1528897713.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:48:33.500Z,1528897713.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:33.606Z,1528897713.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:33.623Z,1528897713.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T13:48:33.624Z,1528897713.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:34.011Z,1528897714.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:34.051Z,1528897714.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T13:48:34.052Z,1528897714.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:34.411Z,1528897714.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:34.449Z,1528897714.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T13:48:34.450Z,1528897714.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:34.812Z,1528897714.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:34.829Z,1528897714.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T13:48:34.830Z,1528897714.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:35.211Z,1528897715.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:35.228Z,1528897715.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T13:48:35.229Z,1528897715.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:35.625Z,1528897715.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:35.659Z,1528897715.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T13:48:35.660Z,1528897715.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:36.029Z,1528897716.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:36.055Z,1528897716.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T13:48:36.056Z,1528897716.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:36.421Z,1528897716.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:36.455Z,1528897716.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T13:48:36.456Z,1528897716.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:36.814Z,1528897716.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:36.832Z,1528897716.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T13:48:36.833Z,1528897716.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:37.212Z,1528897717.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:37.236Z,1528897717.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T13:48:37.237Z,1528897717.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:37.614Z,1528897717.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:37.631Z,1528897717.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T13:48:37.632Z,1528897717.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:38.010Z,1528897718.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:38.036Z,1528897718.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T13:48:38.036Z,1528897718.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:41.115Z,1528897721.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:41.133Z,1528897721.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T13:48:41.134Z,1528897721.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:41.217Z,1528897721.217 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0240.lzma
2018-06-13T13:48:41.255Z,1528897721.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:41.288Z,1528897721.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T13:48:41.293Z,1528897721.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:41.657Z,1528897721.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:41.675Z,1528897721.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T13:48:41.676Z,1528897721.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:42.018Z,1528897722.018 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0240.lzma.bak
2018-06-13T13:48:42.018Z,1528897722.018 [DataOverHttps](INFO): SBD MOMSN=8329325
2018-06-13T13:48:42.070Z,1528897722.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:42.101Z,1528897722.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T13:48:42.102Z,1528897722.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:43.961Z,1528897723.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:43.979Z,1528897723.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T13:48:43.979Z,1528897723.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:44.123Z,1528897724.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:44.164Z,1528897724.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-06-13T13:48:44.165Z,1528897724.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:44.541Z,1528897724.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:44.559Z,1528897724.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T13:48:44.560Z,1528897724.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:44.944Z,1528897724.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:44.962Z,1528897724.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T13:48:44.963Z,1528897724.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:45.343Z,1528897725.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:45.361Z,1528897725.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-06-13T13:48:45.362Z,1528897725.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:48.463Z,1528897728.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:48.480Z,1528897728.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T13:48:48.481Z,1528897728.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:48.620Z,1528897728.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:48.663Z,1528897728.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T13:48:48.664Z,1528897728.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:49.045Z,1528897729.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:49.062Z,1528897729.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T13:48:49.063Z,1528897729.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:49.448Z,1528897729.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:49.467Z,1528897729.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:49.834Z,1528897729.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:49.864Z,1528897729.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:50.227Z,1528897730.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:50.264Z,1528897730.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:50.627Z,1528897730.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:50.664Z,1528897730.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:51.028Z,1528897731.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:51.058Z,1528897731.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:51.454Z,1528897731.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:51.505Z,1528897731.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:51.851Z,1528897731.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:51.869Z,1528897731.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:52.236Z,1528897732.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:52.265Z,1528897732.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:52.645Z,1528897732.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:52.668Z,1528897732.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:53.027Z,1528897733.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:53.070Z,1528897733.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:53.427Z,1528897733.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:53.465Z,1528897733.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:56.914Z,1528897736.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:56.942Z,1528897736.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:58.399Z,1528897738.399 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0241.lzma
2018-06-13T13:48:58.426Z,1528897738.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:58.526Z,1528897738.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:58.685Z,1528897738.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:58.714Z,1528897738.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:48:59.046Z,1528897739.046 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0241.lzma.bak
2018-06-13T13:48:59.046Z,1528897739.046 [DataOverHttps](INFO): SBD MOMSN=8329327
2018-06-13T13:48:59.107Z,1528897739.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:48:59.125Z,1528897739.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:00.971Z,1528897740.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:00.989Z,1528897740.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:00.992Z,1528897740.992 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T13:49:00.992Z,1528897740.992 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T13:49:00.992Z,1528897740.992 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T13:49:01.117Z,1528897741.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:01.168Z,1528897741.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:01.518Z,1528897741.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:01.537Z,1528897741.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:01.916Z,1528897741.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:01.936Z,1528897741.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:02.322Z,1528897742.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:02.340Z,1528897742.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:05.437Z,1528897745.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:05.468Z,1528897745.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:05.602Z,1528897745.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:05.630Z,1528897745.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:06.008Z,1528897746.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:06.026Z,1528897746.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:06.389Z,1528897746.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:06.435Z,1528897746.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:06.784Z,1528897746.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:06.821Z,1528897746.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:07.183Z,1528897747.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:07.251Z,1528897747.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:07.608Z,1528897747.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:07.635Z,1528897747.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:08.004Z,1528897748.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:08.041Z,1528897748.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:08.393Z,1528897748.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:08.434Z,1528897748.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:08.783Z,1528897748.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:08.817Z,1528897748.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:09.183Z,1528897749.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:09.221Z,1528897749.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:09.587Z,1528897749.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:09.604Z,1528897749.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:09.986Z,1528897749.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:10.012Z,1528897750.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:10.386Z,1528897750.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:10.403Z,1528897750.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:10.797Z,1528897750.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:10.840Z,1528897750.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:11.197Z,1528897751.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:11.243Z,1528897751.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:11.594Z,1528897751.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:11.611Z,1528897751.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:11.987Z,1528897751.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:12.004Z,1528897752.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:12.389Z,1528897752.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:12.412Z,1528897752.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:12.787Z,1528897752.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:12.805Z,1528897752.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:13.188Z,1528897753.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:13.205Z,1528897753.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:13.597Z,1528897753.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:13.619Z,1528897753.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:13.997Z,1528897753.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:14.020Z,1528897754.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:14.397Z,1528897754.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:14.420Z,1528897754.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:14.784Z,1528897754.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:14.815Z,1528897754.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:15.183Z,1528897755.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:15.224Z,1528897755.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:15.583Z,1528897755.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:15.618Z,1528897755.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:15.984Z,1528897755.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:16.018Z,1528897756.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:16.379Z,1528897756.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:16.404Z,1528897756.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:16.798Z,1528897756.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:16.841Z,1528897756.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:17.201Z,1528897757.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:17.235Z,1528897757.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:17.593Z,1528897757.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:17.632Z,1528897757.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:17.987Z,1528897757.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:18.028Z,1528897758.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:18.386Z,1528897758.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:18.404Z,1528897758.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:18.784Z,1528897758.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:18.827Z,1528897758.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:19.188Z,1528897759.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:19.233Z,1528897759.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:19.598Z,1528897759.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:19.616Z,1528897759.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:19.997Z,1528897759.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:20.015Z,1528897760.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:20.394Z,1528897760.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:20.420Z,1528897760.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:20.787Z,1528897760.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:20.805Z,1528897760.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:21.179Z,1528897761.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:21.217Z,1528897761.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:21.583Z,1528897761.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:21.618Z,1528897761.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:21.985Z,1528897761.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:22.014Z,1528897762.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:22.384Z,1528897762.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:22.420Z,1528897762.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:22.798Z,1528897762.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:22.822Z,1528897762.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:23.205Z,1528897763.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:23.223Z,1528897763.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:23.598Z,1528897763.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:23.630Z,1528897763.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:23.983Z,1528897763.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:24.020Z,1528897764.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:24.384Z,1528897764.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:24.424Z,1528897764.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:24.784Z,1528897764.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:24.814Z,1528897764.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:25.183Z,1528897765.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:25.200Z,1528897765.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:25.601Z,1528897765.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:25.632Z,1528897765.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:26.001Z,1528897766.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:26.036Z,1528897766.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:26.399Z,1528897766.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:26.434Z,1528897766.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:26.787Z,1528897766.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:26.805Z,1528897766.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:27.186Z,1528897767.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:27.204Z,1528897767.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:27.586Z,1528897767.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:27.604Z,1528897767.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:27.986Z,1528897767.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:28.004Z,1528897768.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:28.383Z,1528897768.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:28.406Z,1528897768.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:28.793Z,1528897768.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:28.811Z,1528897768.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:29.197Z,1528897769.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:29.215Z,1528897769.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:29.594Z,1528897769.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:29.616Z,1528897769.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:29.987Z,1528897769.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:30.018Z,1528897770.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:30.390Z,1528897770.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:30.408Z,1528897770.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:30.788Z,1528897770.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:30.806Z,1528897770.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:31.182Z,1528897771.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:31.215Z,1528897771.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:31.598Z,1528897771.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:31.616Z,1528897771.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:32.002Z,1528897772.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:32.020Z,1528897772.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:32.399Z,1528897772.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:32.417Z,1528897772.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:32.783Z,1528897772.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:32.822Z,1528897772.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:33.183Z,1528897773.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:33.211Z,1528897773.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:33.587Z,1528897773.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:33.620Z,1528897773.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:33.984Z,1528897773.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:34.025Z,1528897774.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:34.383Z,1528897774.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:34.410Z,1528897774.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:34.799Z,1528897774.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:34.817Z,1528897774.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:35.204Z,1528897775.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:35.228Z,1528897775.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:35.589Z,1528897775.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:35.624Z,1528897775.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:35.982Z,1528897775.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:36.019Z,1528897776.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:36.384Z,1528897776.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:36.462Z,1528897776.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:36.784Z,1528897776.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:36.815Z,1528897776.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:37.183Z,1528897777.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:37.215Z,1528897777.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:37.603Z,1528897777.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:37.638Z,1528897777.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:37.998Z,1528897777.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:38.030Z,1528897778.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:38.397Z,1528897778.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:38.429Z,1528897778.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:38.787Z,1528897778.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:38.804Z,1528897778.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:39.183Z,1528897779.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:39.200Z,1528897779.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:39.586Z,1528897779.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:39.604Z,1528897779.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:39.987Z,1528897779.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:40.006Z,1528897780.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:40.382Z,1528897780.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:40.400Z,1528897780.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:40.797Z,1528897780.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:40.831Z,1528897780.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:41.197Z,1528897781.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:41.215Z,1528897781.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:41.591Z,1528897781.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:41.616Z,1528897781.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:41.987Z,1528897781.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:42.005Z,1528897782.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:42.392Z,1528897782.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:42.455Z,1528897782.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:42.780Z,1528897782.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:42.879Z,1528897782.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:43.190Z,1528897783.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:43.265Z,1528897783.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:43.603Z,1528897783.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:43.628Z,1528897783.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:44.003Z,1528897784.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:44.021Z,1528897784.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:44.399Z,1528897784.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:44.417Z,1528897784.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:44.784Z,1528897784.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:44.815Z,1528897784.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:45.183Z,1528897785.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:45.216Z,1528897785.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:45.601Z,1528897785.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:45.619Z,1528897785.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:46.005Z,1528897786.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:46.023Z,1528897786.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:46.401Z,1528897786.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:46.419Z,1528897786.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:46.784Z,1528897786.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:46.817Z,1528897786.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:47.183Z,1528897787.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:47.222Z,1528897787.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:47.589Z,1528897787.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:47.624Z,1528897787.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:48.003Z,1528897788.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:48.021Z,1528897788.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:48.404Z,1528897788.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:48.423Z,1528897788.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:48.784Z,1528897788.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:48.816Z,1528897788.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:49.186Z,1528897789.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:49.208Z,1528897789.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:49.604Z,1528897789.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:49.623Z,1528897789.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:49.999Z,1528897789.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:50.017Z,1528897790.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:50.399Z,1528897790.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:50.417Z,1528897790.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:50.790Z,1528897790.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:50.808Z,1528897790.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:51.189Z,1528897791.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:51.207Z,1528897791.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:51.598Z,1528897791.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:51.624Z,1528897791.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:52.003Z,1528897792.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:52.021Z,1528897792.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:52.400Z,1528897792.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:52.417Z,1528897792.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:52.789Z,1528897792.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:52.807Z,1528897792.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:53.190Z,1528897793.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:53.212Z,1528897793.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:53.599Z,1528897793.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:53.618Z,1528897793.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:54.002Z,1528897794.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:54.020Z,1528897794.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:54.400Z,1528897794.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:54.418Z,1528897794.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:54.790Z,1528897794.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:54.807Z,1528897794.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:55.186Z,1528897795.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:55.212Z,1528897795.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:55.603Z,1528897795.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:55.628Z,1528897795.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:56.003Z,1528897796.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:56.028Z,1528897796.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:56.395Z,1528897796.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:56.428Z,1528897796.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:56.784Z,1528897796.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:56.816Z,1528897796.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:57.183Z,1528897797.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:57.216Z,1528897797.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:57.599Z,1528897797.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:57.617Z,1528897797.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:58.004Z,1528897798.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:58.022Z,1528897798.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:58.400Z,1528897798.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:58.418Z,1528897798.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:58.784Z,1528897798.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:58.820Z,1528897798.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:59.183Z,1528897799.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:59.224Z,1528897799.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:49:59.599Z,1528897799.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:49:59.618Z,1528897799.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:00.000Z,1528897800.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:00.018Z,1528897800.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:00.405Z,1528897800.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:00.423Z,1528897800.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:00.780Z,1528897800.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:00.815Z,1528897800.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:01.187Z,1528897801.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:01.217Z,1528897801.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:01.608Z,1528897801.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:01.632Z,1528897801.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:02.005Z,1528897802.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:02.023Z,1528897802.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:02.406Z,1528897802.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:02.423Z,1528897802.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:02.783Z,1528897802.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:02.813Z,1528897802.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:05.896Z,1528897805.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:05.915Z,1528897805.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:06.035Z,1528897806.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:06.079Z,1528897806.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:06.442Z,1528897806.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:06.480Z,1528897806.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:06.838Z,1528897806.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:06.860Z,1528897806.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:07.229Z,1528897807.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:07.248Z,1528897807.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:07.625Z,1528897807.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:07.643Z,1528897807.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:08.024Z,1528897808.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:08.050Z,1528897808.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:08.427Z,1528897808.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:08.449Z,1528897808.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:08.834Z,1528897808.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:08.852Z,1528897808.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:09.234Z,1528897809.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:09.256Z,1528897809.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:09.634Z,1528897809.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:09.656Z,1528897809.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:10.026Z,1528897810.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:10.048Z,1528897810.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:10.423Z,1528897810.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:10.446Z,1528897810.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:10.830Z,1528897810.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:10.847Z,1528897810.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:11.230Z,1528897811.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:11.248Z,1528897811.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:11.635Z,1528897811.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:11.653Z,1528897811.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:12.041Z,1528897812.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:12.059Z,1528897812.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:12.440Z,1528897812.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:12.460Z,1528897812.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:12.834Z,1528897812.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:12.852Z,1528897812.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:13.226Z,1528897813.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:13.250Z,1528897813.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:13.639Z,1528897813.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:13.656Z,1528897813.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:14.039Z,1528897814.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:14.057Z,1528897814.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:14.438Z,1528897814.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:14.460Z,1528897814.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:14.818Z,1528897814.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:14.855Z,1528897814.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:15.219Z,1528897815.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:15.255Z,1528897815.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:15.639Z,1528897815.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:15.657Z,1528897815.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:16.043Z,1528897816.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:16.061Z,1528897816.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:16.435Z,1528897816.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:16.453Z,1528897816.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:16.827Z,1528897816.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:16.857Z,1528897816.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:17.224Z,1528897817.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:17.251Z,1528897817.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:17.640Z,1528897817.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:17.660Z,1528897817.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:18.043Z,1528897818.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:18.061Z,1528897818.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:18.439Z,1528897818.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:18.457Z,1528897818.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:18.824Z,1528897818.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:18.851Z,1528897818.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:19.223Z,1528897819.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:19.259Z,1528897819.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:19.639Z,1528897819.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:19.662Z,1528897819.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:20.043Z,1528897820.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:20.061Z,1528897820.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:20.439Z,1528897820.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:20.457Z,1528897820.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:20.823Z,1528897820.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:20.851Z,1528897820.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:21.223Z,1528897821.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:21.250Z,1528897821.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:21.640Z,1528897821.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:21.658Z,1528897821.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:22.039Z,1528897822.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:22.057Z,1528897822.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:22.440Z,1528897822.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:22.458Z,1528897822.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:22.824Z,1528897822.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:22.859Z,1528897822.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:23.223Z,1528897823.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:23.251Z,1528897823.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:23.640Z,1528897823.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:23.659Z,1528897823.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:24.043Z,1528897824.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:24.061Z,1528897824.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:24.440Z,1528897824.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:24.458Z,1528897824.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:24.824Z,1528897824.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:24.855Z,1528897824.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:25.223Z,1528897825.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:25.259Z,1528897825.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:25.644Z,1528897825.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:25.662Z,1528897825.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:26.046Z,1528897826.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:26.064Z,1528897826.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:26.444Z,1528897826.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:26.462Z,1528897826.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:26.824Z,1528897826.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:26.851Z,1528897826.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:27.223Z,1528897827.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:27.260Z,1528897827.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:27.638Z,1528897827.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:27.662Z,1528897827.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:28.044Z,1528897828.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:28.062Z,1528897828.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:28.440Z,1528897828.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:28.460Z,1528897828.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:28.824Z,1528897828.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:28.854Z,1528897828.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:29.226Z,1528897829.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:29.255Z,1528897829.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:29.640Z,1528897829.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:29.658Z,1528897829.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:30.042Z,1528897830.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:30.060Z,1528897830.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:30.444Z,1528897830.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:30.462Z,1528897830.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:30.824Z,1528897830.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:30.861Z,1528897830.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:31.223Z,1528897831.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:31.256Z,1528897831.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:31.643Z,1528897831.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:31.672Z,1528897831.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:32.042Z,1528897832.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:32.060Z,1528897832.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:32.439Z,1528897832.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:32.457Z,1528897832.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:32.824Z,1528897832.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:32.856Z,1528897832.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:33.223Z,1528897833.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:33.257Z,1528897833.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:33.640Z,1528897833.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:33.658Z,1528897833.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:34.048Z,1528897834.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:34.072Z,1528897834.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:34.439Z,1528897834.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:34.457Z,1528897834.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:34.824Z,1528897834.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:34.859Z,1528897834.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:35.224Z,1528897835.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:35.254Z,1528897835.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:35.643Z,1528897835.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:35.661Z,1528897835.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:36.044Z,1528897836.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:36.068Z,1528897836.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:36.444Z,1528897836.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:36.462Z,1528897836.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:36.824Z,1528897836.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:36.860Z,1528897836.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:37.223Z,1528897837.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:37.259Z,1528897837.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:37.644Z,1528897837.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:37.662Z,1528897837.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:38.043Z,1528897838.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:38.061Z,1528897838.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:38.439Z,1528897838.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:38.457Z,1528897838.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:38.828Z,1528897838.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:38.857Z,1528897838.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:39.223Z,1528897839.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:39.255Z,1528897839.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:39.640Z,1528897839.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:39.658Z,1528897839.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:40.043Z,1528897840.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:40.071Z,1528897840.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:40.440Z,1528897840.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:40.458Z,1528897840.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:40.824Z,1528897840.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:40.859Z,1528897840.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:41.225Z,1528897841.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:41.254Z,1528897841.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:41.640Z,1528897841.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:41.658Z,1528897841.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:42.042Z,1528897842.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:42.060Z,1528897842.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:42.449Z,1528897842.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:42.472Z,1528897842.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:42.820Z,1528897842.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:42.861Z,1528897842.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:43.224Z,1528897843.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:43.255Z,1528897843.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:43.624Z,1528897843.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:43.656Z,1528897843.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:44.040Z,1528897844.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:44.058Z,1528897844.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:44.442Z,1528897844.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:44.474Z,1528897844.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:44.846Z,1528897844.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:44.864Z,1528897844.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:45.219Z,1528897845.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:45.255Z,1528897845.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:45.627Z,1528897845.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:45.655Z,1528897845.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:46.024Z,1528897846.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:46.060Z,1528897846.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:46.423Z,1528897846.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:46.457Z,1528897846.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:46.840Z,1528897846.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:46.858Z,1528897846.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:47.248Z,1528897847.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:47.272Z,1528897847.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:47.630Z,1528897847.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:47.664Z,1528897847.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:48.023Z,1528897848.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:48.056Z,1528897848.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:48.423Z,1528897848.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:48.458Z,1528897848.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:48.819Z,1528897848.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:48.844Z,1528897848.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:49.227Z,1528897849.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:49.245Z,1528897849.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:49.626Z,1528897849.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:49.645Z,1528897849.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:50.037Z,1528897850.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:50.071Z,1528897850.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:50.437Z,1528897850.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:50.455Z,1528897850.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:50.837Z,1528897850.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:50.855Z,1528897850.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:51.223Z,1528897851.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:51.245Z,1528897851.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:51.627Z,1528897851.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:51.644Z,1528897851.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:52.028Z,1528897852.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:52.052Z,1528897852.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:52.428Z,1528897852.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:52.447Z,1528897852.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:52.833Z,1528897852.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:52.851Z,1528897852.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:53.237Z,1528897853.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:53.256Z,1528897853.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:53.633Z,1528897853.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:53.651Z,1528897853.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:54.028Z,1528897854.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:54.046Z,1528897854.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:54.430Z,1528897854.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:54.448Z,1528897854.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:54.823Z,1528897854.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:54.846Z,1528897854.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:55.230Z,1528897855.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:55.247Z,1528897855.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:55.627Z,1528897855.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:55.661Z,1528897855.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:56.038Z,1528897856.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:56.056Z,1528897856.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:56.436Z,1528897856.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:56.455Z,1528897856.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:56.838Z,1528897856.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:56.856Z,1528897856.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:57.230Z,1528897857.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:57.252Z,1528897857.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:57.627Z,1528897857.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:57.649Z,1528897857.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:58.030Z,1528897858.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:58.059Z,1528897858.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:58.429Z,1528897858.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:58.446Z,1528897858.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:58.838Z,1528897858.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:58.855Z,1528897858.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:59.240Z,1528897859.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:59.258Z,1528897859.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:50:59.635Z,1528897859.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:50:59.652Z,1528897859.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:00.022Z,1528897860.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:00.054Z,1528897860.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:00.430Z,1528897860.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:00.448Z,1528897860.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:00.823Z,1528897860.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:00.846Z,1528897860.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:01.234Z,1528897861.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:01.252Z,1528897861.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:01.627Z,1528897861.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:01.652Z,1528897861.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:04.749Z,1528897864.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:04.785Z,1528897864.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:04.917Z,1528897864.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:04.960Z,1528897864.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:05.313Z,1528897865.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:05.338Z,1528897865.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:05.698Z,1528897865.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:05.716Z,1528897865.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:06.094Z,1528897866.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:06.124Z,1528897866.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:06.501Z,1528897866.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:06.519Z,1528897866.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:06.902Z,1528897866.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:06.924Z,1528897866.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:07.310Z,1528897867.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:07.348Z,1528897867.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:07.710Z,1528897867.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:07.727Z,1528897867.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:08.101Z,1528897868.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:08.119Z,1528897868.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:08.500Z,1528897868.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:08.518Z,1528897868.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:08.900Z,1528897868.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:08.930Z,1528897868.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:09.301Z,1528897869.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:09.324Z,1528897869.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:09.711Z,1528897869.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:09.729Z,1528897869.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:10.111Z,1528897870.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:10.129Z,1528897870.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:10.509Z,1528897870.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:10.527Z,1528897870.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:10.902Z,1528897870.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:10.920Z,1528897870.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:11.306Z,1528897871.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:11.329Z,1528897871.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:11.710Z,1528897871.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:11.728Z,1528897871.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:12.110Z,1528897872.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:12.128Z,1528897872.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:12.511Z,1528897872.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:12.529Z,1528897872.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:12.902Z,1528897872.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:12.920Z,1528897872.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:13.304Z,1528897873.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:13.322Z,1528897873.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:13.714Z,1528897873.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:13.755Z,1528897873.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:14.113Z,1528897874.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:14.131Z,1528897874.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:14.512Z,1528897874.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:14.536Z,1528897874.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:14.902Z,1528897874.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:14.926Z,1528897874.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:15.301Z,1528897875.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:15.320Z,1528897875.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:15.714Z,1528897875.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:15.740Z,1528897875.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:16.115Z,1528897876.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:16.135Z,1528897876.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:16.511Z,1528897876.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:16.529Z,1528897876.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:16.902Z,1528897876.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:16.920Z,1528897876.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:17.299Z,1528897877.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:17.328Z,1528897877.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:17.711Z,1528897877.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:17.736Z,1528897877.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:18.115Z,1528897878.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:18.141Z,1528897878.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:18.515Z,1528897878.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:18.533Z,1528897878.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:18.896Z,1528897878.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:18.932Z,1528897878.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:19.295Z,1528897879.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:19.322Z,1528897879.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:19.716Z,1528897879.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:19.734Z,1528897879.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:20.115Z,1528897880.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:20.133Z,1528897880.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:20.511Z,1528897880.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:20.529Z,1528897880.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:20.896Z,1528897880.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:20.926Z,1528897880.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:21.295Z,1528897881.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:21.322Z,1528897881.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:21.716Z,1528897881.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:21.740Z,1528897881.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:22.116Z,1528897882.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:22.134Z,1528897882.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:22.501Z,1528897882.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:22.535Z,1528897882.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:22.895Z,1528897882.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:22.913Z,1528897882.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:23.299Z,1528897883.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:23.317Z,1528897883.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:23.706Z,1528897883.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:23.744Z,1528897883.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:24.109Z,1528897884.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:24.127Z,1528897884.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:24.509Z,1528897884.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:24.527Z,1528897884.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:24.894Z,1528897884.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:24.921Z,1528897884.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:25.300Z,1528897885.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:25.318Z,1528897885.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:25.710Z,1528897885.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:25.728Z,1528897885.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:26.105Z,1528897886.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:26.123Z,1528897886.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:26.502Z,1528897886.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:26.524Z,1528897886.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:26.902Z,1528897886.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:26.920Z,1528897886.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:27.298Z,1528897887.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:27.315Z,1528897887.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:27.706Z,1528897887.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:27.724Z,1528897887.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:28.105Z,1528897888.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:28.123Z,1528897888.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:28.509Z,1528897888.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:28.527Z,1528897888.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:28.903Z,1528897888.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:28.920Z,1528897888.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:29.300Z,1528897889.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:29.326Z,1528897889.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:29.704Z,1528897889.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:29.736Z,1528897889.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:30.110Z,1528897890.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:30.132Z,1528897890.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:30.513Z,1528897890.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:30.531Z,1528897890.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:30.902Z,1528897890.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:30.920Z,1528897890.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:31.299Z,1528897891.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:31.322Z,1528897891.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:31.695Z,1528897891.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:31.736Z,1528897891.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:32.112Z,1528897892.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:32.130Z,1528897892.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:32.517Z,1528897892.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:32.535Z,1528897892.535 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:32.535Z,1528897892.535 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 208
2018-06-13T13:51:32.535Z,1528897892.535 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:51:32.537Z,1528897892.537 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:32.537Z,1528897892.537 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 208
2018-06-13T13:51:32.537Z,1528897892.537 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:51:32.539Z,1528897892.539 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:32.539Z,1528897892.539 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 208
2018-06-13T13:51:32.539Z,1528897892.539 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:51:32.617Z,1528897892.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:51:32.617Z,1528897892.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:51:32.618Z,1528897892.618 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:51:32.925Z,1528897892.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:33.016Z,1528897893.016 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:51:33.016Z,1528897893.016 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 208
2018-06-13T13:51:33.018Z,1528897893.018 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:51:33.018Z,1528897893.018 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 208
2018-06-13T13:51:33.019Z,1528897893.019 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:51:33.019Z,1528897893.019 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 208
2018-06-13T13:51:33.295Z,1528897893.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:33.339Z,1528897893.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:51:33.339Z,1528897893.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:51:33.340Z,1528897893.340 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:51:33.340Z,1528897893.340 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:51:33.345Z,1528897893.345 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:51:33.345Z,1528897893.345 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:51:33.345Z,1528897893.345 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:51:33.346Z,1528897893.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:51:33.346Z,1528897893.346 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:51:33.695Z,1528897893.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:33.729Z,1528897893.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:51:33.730Z,1528897893.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:34.098Z,1528897894.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:34.124Z,1528897894.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:51:34.145Z,1528897894.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:34.498Z,1528897894.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:34.515Z,1528897894.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:51:34.516Z,1528897894.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:34.902Z,1528897894.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:34.924Z,1528897894.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:51:34.925Z,1528897894.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:35.309Z,1528897895.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:35.327Z,1528897895.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:51:35.328Z,1528897895.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:35.706Z,1528897895.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:35.728Z,1528897895.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:51:35.729Z,1528897895.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:36.101Z,1528897896.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:36.119Z,1528897896.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:51:36.119Z,1528897896.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:36.494Z,1528897896.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:36.524Z,1528897896.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:51:36.524Z,1528897896.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:36.901Z,1528897896.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:36.919Z,1528897896.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:51:36.919Z,1528897896.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:37.294Z,1528897897.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:37.328Z,1528897897.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:51:37.328Z,1528897897.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:37.699Z,1528897897.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:37.723Z,1528897897.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:51:37.724Z,1528897897.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:38.108Z,1528897898.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:38.125Z,1528897898.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:51:38.126Z,1528897898.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:38.510Z,1528897898.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:38.532Z,1528897898.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:51:38.533Z,1528897898.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:38.911Z,1528897898.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:38.928Z,1528897898.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:51:38.929Z,1528897898.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:39.301Z,1528897899.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:39.318Z,1528897899.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:51:39.319Z,1528897899.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:39.694Z,1528897899.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:39.719Z,1528897899.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:51:39.720Z,1528897899.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:40.100Z,1528897900.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:40.133Z,1528897900.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:51:40.134Z,1528897900.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:40.491Z,1528897900.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:40.527Z,1528897900.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:51:40.527Z,1528897900.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:40.911Z,1528897900.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:40.928Z,1528897900.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:51:40.930Z,1528897900.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:41.312Z,1528897901.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:41.329Z,1528897901.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:51:41.330Z,1528897901.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:41.711Z,1528897901.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:41.729Z,1528897901.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:51:41.730Z,1528897901.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:42.100Z,1528897902.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:42.123Z,1528897902.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:51:42.124Z,1528897902.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:42.502Z,1528897902.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:42.524Z,1528897902.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:51:42.525Z,1528897902.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:42.891Z,1528897902.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:42.929Z,1528897902.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:51:42.930Z,1528897902.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:43.305Z,1528897903.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:43.323Z,1528897903.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:51:43.324Z,1528897903.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:43.699Z,1528897903.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:43.724Z,1528897903.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T13:51:43.724Z,1528897903.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:44.111Z,1528897904.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:44.130Z,1528897904.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T13:51:44.131Z,1528897904.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:44.511Z,1528897904.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:44.528Z,1528897904.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T13:51:44.530Z,1528897904.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:44.915Z,1528897904.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:44.933Z,1528897904.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T13:51:44.934Z,1528897904.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:45.301Z,1528897905.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:45.319Z,1528897905.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T13:51:45.320Z,1528897905.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:45.699Z,1528897905.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:45.722Z,1528897905.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T13:51:45.722Z,1528897905.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:46.091Z,1528897906.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:46.127Z,1528897906.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T13:51:46.128Z,1528897906.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:46.500Z,1528897906.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:46.524Z,1528897906.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T13:51:46.525Z,1528897906.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:46.912Z,1528897906.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:46.929Z,1528897906.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T13:51:46.930Z,1528897906.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:47.315Z,1528897907.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:47.333Z,1528897907.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T13:51:47.334Z,1528897907.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:47.711Z,1528897907.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:47.729Z,1528897907.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T13:51:47.730Z,1528897907.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:48.091Z,1528897908.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:48.124Z,1528897908.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T13:51:48.130Z,1528897908.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:48.495Z,1528897908.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:48.529Z,1528897908.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T13:51:48.530Z,1528897908.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:48.895Z,1528897908.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:48.933Z,1528897908.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T13:51:48.934Z,1528897908.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:49.296Z,1528897909.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:49.329Z,1528897909.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T13:51:49.330Z,1528897909.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:49.699Z,1528897909.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:49.716Z,1528897909.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T13:51:49.734Z,1528897909.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:50.109Z,1528897910.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:50.147Z,1528897910.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T13:51:50.148Z,1528897910.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:50.517Z,1528897910.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:50.542Z,1528897910.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T13:51:50.543Z,1528897910.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:50.905Z,1528897910.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:50.923Z,1528897910.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T13:51:50.924Z,1528897910.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:51.300Z,1528897911.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:51.318Z,1528897911.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T13:51:51.319Z,1528897911.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:51.701Z,1528897911.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:51.718Z,1528897911.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T13:51:51.719Z,1528897911.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:52.100Z,1528897912.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:52.126Z,1528897912.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T13:51:52.126Z,1528897912.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:52.500Z,1528897912.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:52.518Z,1528897912.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T13:51:52.519Z,1528897912.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:52.874Z,1528897912.874 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T13:51:52.874Z,1528897912.874 [NAL9602] Data Fault, FailCount= 2
2018-06-13T13:51:52.875Z,1528897912.875 [NAL9602](ERROR): Data Fault
2018-06-13T13:51:52.894Z,1528897912.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:52.939Z,1528897912.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:53.029Z,1528897913.029 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T13:51:53.278Z,1528897913.278 [NAL9602](INFO): Powering down
2018-06-13T13:51:53.303Z,1528897913.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:53.341Z,1528897913.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:53.700Z,1528897913.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:53.720Z,1528897913.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:54.098Z,1528897914.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:54.122Z,1528897914.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:54.201Z,1528897914.201 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T13:51:54.201Z,1528897914.201 [NAL9602] No Fault, FailCount= 2
2018-06-13T13:51:54.498Z,1528897914.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:54.524Z,1528897914.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:54.890Z,1528897914.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:54.933Z,1528897914.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:55.294Z,1528897915.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:55.328Z,1528897915.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:55.695Z,1528897915.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:55.722Z,1528897915.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:56.094Z,1528897916.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:56.122Z,1528897916.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:56.495Z,1528897916.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:56.523Z,1528897916.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:56.894Z,1528897916.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:56.923Z,1528897916.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:57.290Z,1528897917.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:57.325Z,1528897917.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:57.694Z,1528897917.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:57.727Z,1528897917.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:58.094Z,1528897918.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:58.128Z,1528897918.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:58.494Z,1528897918.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:58.532Z,1528897918.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:58.893Z,1528897918.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:58.928Z,1528897918.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:59.294Z,1528897919.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:59.328Z,1528897919.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:51:59.690Z,1528897919.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:51:59.708Z,1528897919.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:00.094Z,1528897920.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:00.112Z,1528897920.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:00.494Z,1528897920.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:00.512Z,1528897920.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:00.898Z,1528897920.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:00.916Z,1528897920.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:01.299Z,1528897921.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:01.317Z,1528897921.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:01.698Z,1528897921.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:01.716Z,1528897921.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:04.806Z,1528897924.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:04.845Z,1528897924.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:04.962Z,1528897924.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:05.001Z,1528897925.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:05.362Z,1528897925.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:05.396Z,1528897925.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:05.763Z,1528897925.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:05.795Z,1528897925.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:06.158Z,1528897926.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:06.195Z,1528897926.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:06.557Z,1528897926.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:06.597Z,1528897926.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:06.958Z,1528897926.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:06.992Z,1528897926.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:07.362Z,1528897927.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:07.400Z,1528897927.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:07.758Z,1528897927.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:07.793Z,1528897927.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:08.154Z,1528897928.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:08.172Z,1528897928.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:08.558Z,1528897928.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:08.576Z,1528897928.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:08.959Z,1528897928.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:08.977Z,1528897928.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:09.363Z,1528897929.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:09.381Z,1528897929.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:09.762Z,1528897929.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:09.780Z,1528897929.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:10.162Z,1528897930.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:10.180Z,1528897930.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:10.557Z,1528897930.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:10.575Z,1528897930.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:10.962Z,1528897930.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:10.988Z,1528897930.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:11.362Z,1528897931.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:11.382Z,1528897931.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:11.760Z,1528897931.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:11.779Z,1528897931.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:12.163Z,1528897932.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:12.188Z,1528897932.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:12.562Z,1528897932.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:12.580Z,1528897932.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:12.961Z,1528897932.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:12.984Z,1528897932.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:13.364Z,1528897933.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:13.382Z,1528897933.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:13.764Z,1528897933.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:13.782Z,1528897933.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:14.162Z,1528897934.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:14.180Z,1528897934.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:14.564Z,1528897934.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:14.583Z,1528897934.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:14.959Z,1528897934.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:14.992Z,1528897934.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:15.361Z,1528897935.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:15.379Z,1528897935.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:15.762Z,1528897935.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:15.805Z,1528897935.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:16.161Z,1528897936.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:16.180Z,1528897936.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:16.560Z,1528897936.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:16.584Z,1528897936.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:16.965Z,1528897936.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:16.983Z,1528897936.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:17.360Z,1528897937.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:17.379Z,1528897937.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:17.760Z,1528897937.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:17.779Z,1528897937.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:18.164Z,1528897938.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:18.184Z,1528897938.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:18.560Z,1528897938.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:18.579Z,1528897938.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:18.962Z,1528897938.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:18.980Z,1528897938.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:19.364Z,1528897939.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:19.382Z,1528897939.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:19.760Z,1528897939.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:19.780Z,1528897939.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:20.160Z,1528897940.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:20.178Z,1528897940.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:20.563Z,1528897940.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:20.585Z,1528897940.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:20.961Z,1528897940.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:20.979Z,1528897940.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:21.360Z,1528897941.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:21.378Z,1528897941.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:21.764Z,1528897941.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:21.783Z,1528897941.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:22.160Z,1528897942.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:22.178Z,1528897942.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:22.560Z,1528897942.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:22.578Z,1528897942.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:22.963Z,1528897942.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:22.986Z,1528897942.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:23.338Z,1528897943.338 [NAL9602](INFO): Powering up NAL9602
2018-06-13T13:52:23.364Z,1528897943.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:23.388Z,1528897943.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:23.764Z,1528897943.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:23.782Z,1528897943.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:24.162Z,1528897944.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:24.185Z,1528897944.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:24.560Z,1528897944.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:24.578Z,1528897944.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:24.964Z,1528897944.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:24.983Z,1528897944.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:25.362Z,1528897945.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:25.385Z,1528897945.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:25.761Z,1528897945.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:25.779Z,1528897945.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:26.160Z,1528897946.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:26.178Z,1528897946.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:26.564Z,1528897946.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:26.588Z,1528897946.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:26.960Z,1528897946.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:26.978Z,1528897946.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:27.360Z,1528897947.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:27.378Z,1528897947.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:27.762Z,1528897947.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:27.792Z,1528897947.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:28.164Z,1528897948.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:28.182Z,1528897948.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:28.554Z,1528897948.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:28.593Z,1528897948.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:28.959Z,1528897948.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:29.007Z,1528897949.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:29.358Z,1528897949.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:29.386Z,1528897949.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:29.754Z,1528897949.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:29.793Z,1528897949.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:30.158Z,1528897950.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:30.192Z,1528897950.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:30.555Z,1528897950.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:30.588Z,1528897950.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:30.958Z,1528897950.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:30.986Z,1528897950.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:31.358Z,1528897951.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:31.386Z,1528897951.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:31.758Z,1528897951.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:31.786Z,1528897951.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:32.158Z,1528897952.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:32.185Z,1528897952.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:32.559Z,1528897952.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:32.587Z,1528897952.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:32.958Z,1528897952.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:32.986Z,1528897952.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:33.358Z,1528897953.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:33.386Z,1528897953.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:33.776Z,1528897953.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:33.794Z,1528897953.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:34.142Z,1528897954.142 [NAL9602](INFO): NAL9602 initialized
2018-06-13T13:52:34.159Z,1528897954.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:34.191Z,1528897954.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:34.555Z,1528897954.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:34.591Z,1528897954.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:34.980Z,1528897954.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:34.999Z,1528897954.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:35.375Z,1528897955.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:35.408Z,1528897955.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:35.779Z,1528897955.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:35.798Z,1528897955.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:36.156Z,1528897956.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:36.202Z,1528897956.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:36.556Z,1528897956.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:36.594Z,1528897956.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:36.959Z,1528897956.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:36.995Z,1528897956.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:37.380Z,1528897957.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:37.404Z,1528897957.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:37.778Z,1528897957.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:37.813Z,1528897957.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:38.169Z,1528897958.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:38.205Z,1528897958.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:38.559Z,1528897958.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:38.586Z,1528897958.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:38.955Z,1528897958.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:38.974Z,1528897958.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:39.360Z,1528897959.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:39.379Z,1528897959.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:39.763Z,1528897959.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:39.782Z,1528897959.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:40.169Z,1528897960.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:40.218Z,1528897960.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:40.573Z,1528897960.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:40.615Z,1528897960.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:40.974Z,1528897960.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:40.991Z,1528897960.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:41.359Z,1528897961.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:41.390Z,1528897961.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:41.765Z,1528897961.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:41.783Z,1528897961.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:42.169Z,1528897962.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:42.187Z,1528897962.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:42.558Z,1528897962.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:42.584Z,1528897962.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:42.965Z,1528897962.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:42.983Z,1528897962.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:43.375Z,1528897963.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:43.392Z,1528897963.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:43.774Z,1528897963.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:43.792Z,1528897963.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:44.175Z,1528897964.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:44.193Z,1528897964.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:44.566Z,1528897964.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:44.584Z,1528897964.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:44.959Z,1528897964.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:44.983Z,1528897964.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:45.365Z,1528897965.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:45.383Z,1528897965.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:45.766Z,1528897965.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:45.784Z,1528897965.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:46.171Z,1528897966.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:46.190Z,1528897966.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:46.578Z,1528897966.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:46.596Z,1528897966.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:46.980Z,1528897966.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:46.998Z,1528897966.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:47.355Z,1528897967.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:47.392Z,1528897967.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:47.764Z,1528897967.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:47.783Z,1528897967.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:48.166Z,1528897968.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:48.184Z,1528897968.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:48.556Z,1528897968.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:48.588Z,1528897968.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:48.966Z,1528897968.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:48.984Z,1528897968.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:49.379Z,1528897969.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:49.396Z,1528897969.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:49.778Z,1528897969.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:49.825Z,1528897969.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:50.175Z,1528897970.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:50.193Z,1528897970.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:50.565Z,1528897970.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:50.587Z,1528897970.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:50.955Z,1528897970.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:50.998Z,1528897970.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:51.366Z,1528897971.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:51.409Z,1528897971.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:51.763Z,1528897971.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:51.788Z,1528897971.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:52.172Z,1528897972.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:52.191Z,1528897972.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:52.578Z,1528897972.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:52.601Z,1528897972.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:52.980Z,1528897972.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:52.999Z,1528897972.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:53.355Z,1528897973.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:53.396Z,1528897973.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:53.756Z,1528897973.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:53.791Z,1528897973.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:54.160Z,1528897974.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:54.192Z,1528897974.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:54.560Z,1528897974.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:54.595Z,1528897974.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:54.955Z,1528897974.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:54.989Z,1528897974.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:55.381Z,1528897975.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:55.399Z,1528897975.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:55.771Z,1528897975.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:55.814Z,1528897975.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:56.166Z,1528897976.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:56.192Z,1528897976.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:56.559Z,1528897976.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:56.590Z,1528897976.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:56.959Z,1528897976.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:56.978Z,1528897976.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:57.359Z,1528897977.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:57.378Z,1528897977.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:57.762Z,1528897977.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:57.782Z,1528897977.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:58.169Z,1528897978.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:58.205Z,1528897978.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:58.573Z,1528897978.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:58.592Z,1528897978.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:58.973Z,1528897978.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:58.992Z,1528897978.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:59.364Z,1528897979.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:59.382Z,1528897979.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:52:59.760Z,1528897979.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:52:59.778Z,1528897979.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:00.165Z,1528897980.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:00.183Z,1528897980.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:00.562Z,1528897980.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:00.580Z,1528897980.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:00.960Z,1528897980.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:00.978Z,1528897980.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:01.377Z,1528897981.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:01.421Z,1528897981.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:01.777Z,1528897981.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:01.821Z,1528897981.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:04.889Z,1528897984.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:04.926Z,1528897984.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:05.043Z,1528897985.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:05.080Z,1528897985.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:05.443Z,1528897985.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:05.481Z,1528897985.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:05.839Z,1528897985.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:05.870Z,1528897985.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:06.244Z,1528897986.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:06.261Z,1528897986.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:06.642Z,1528897986.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:06.660Z,1528897986.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:07.049Z,1528897987.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:07.067Z,1528897987.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:07.453Z,1528897987.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:07.471Z,1528897987.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:07.853Z,1528897987.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:07.872Z,1528897987.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:08.242Z,1528897988.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:08.261Z,1528897988.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:08.644Z,1528897988.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:08.662Z,1528897988.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:09.049Z,1528897989.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:09.068Z,1528897989.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:09.449Z,1528897989.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:09.467Z,1528897989.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:09.849Z,1528897989.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:09.867Z,1528897989.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:10.245Z,1528897990.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:10.263Z,1528897990.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:10.646Z,1528897990.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:10.663Z,1528897990.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:11.050Z,1528897991.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:11.068Z,1528897991.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:11.453Z,1528897991.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:11.471Z,1528897991.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:11.849Z,1528897991.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:11.872Z,1528897991.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:12.244Z,1528897992.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:12.266Z,1528897992.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:12.644Z,1528897992.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:12.663Z,1528897992.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:13.049Z,1528897993.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:13.067Z,1528897993.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:13.453Z,1528897993.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:13.471Z,1528897993.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:13.850Z,1528897993.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:13.868Z,1528897993.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:14.245Z,1528897994.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:14.263Z,1528897994.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:14.639Z,1528897994.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:14.672Z,1528897994.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:15.044Z,1528897995.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:15.062Z,1528897995.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:15.453Z,1528897995.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:15.471Z,1528897995.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:15.853Z,1528897995.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:15.871Z,1528897995.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:16.247Z,1528897996.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:16.264Z,1528897996.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:16.642Z,1528897996.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:16.660Z,1528897996.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:17.044Z,1528897997.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:17.062Z,1528897997.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:17.444Z,1528897997.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:17.474Z,1528897997.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:17.842Z,1528897997.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:17.860Z,1528897997.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:18.254Z,1528897998.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:18.272Z,1528897998.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:18.653Z,1528897998.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:18.671Z,1528897998.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:19.051Z,1528897999.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:19.069Z,1528897999.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:19.445Z,1528897999.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:19.463Z,1528897999.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:19.843Z,1528897999.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:19.873Z,1528897999.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:20.248Z,1528898000.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:20.266Z,1528898000.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:20.643Z,1528898000.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:20.676Z,1528898000.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:21.056Z,1528898001.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:21.074Z,1528898001.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:21.456Z,1528898001.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:21.474Z,1528898001.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:21.856Z,1528898001.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:21.876Z,1528898001.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:22.246Z,1528898002.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:22.270Z,1528898002.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:22.635Z,1528898002.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:22.664Z,1528898002.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:23.050Z,1528898003.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:23.072Z,1528898003.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:23.459Z,1528898003.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:23.477Z,1528898003.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:23.856Z,1528898003.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:23.874Z,1528898003.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:24.250Z,1528898004.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:24.280Z,1528898004.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:24.639Z,1528898004.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:24.676Z,1528898004.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:25.040Z,1528898005.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:25.069Z,1528898005.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:25.439Z,1528898005.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:25.468Z,1528898005.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:25.839Z,1528898005.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:25.868Z,1528898005.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:26.257Z,1528898006.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:26.275Z,1528898006.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:26.660Z,1528898006.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:26.678Z,1528898006.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:27.058Z,1528898007.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:27.076Z,1528898007.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:27.435Z,1528898007.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:27.473Z,1528898007.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:27.839Z,1528898007.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:27.876Z,1528898007.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:28.239Z,1528898008.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:28.278Z,1528898008.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:28.636Z,1528898008.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:28.670Z,1528898008.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:29.039Z,1528898009.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:29.076Z,1528898009.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:29.449Z,1528898009.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:29.484Z,1528898009.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:29.849Z,1528898009.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:29.877Z,1528898009.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:30.250Z,1528898010.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:30.281Z,1528898010.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:30.635Z,1528898010.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:30.665Z,1528898010.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:31.035Z,1528898011.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:31.053Z,1528898011.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:31.439Z,1528898011.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:31.457Z,1528898011.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:31.843Z,1528898011.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:31.888Z,1528898011.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:32.253Z,1528898012.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:32.287Z,1528898012.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:32.657Z,1528898012.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:32.691Z,1528898012.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:33.050Z,1528898013.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:33.068Z,1528898013.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:33.442Z,1528898013.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:33.460Z,1528898013.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:33.844Z,1528898013.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:33.863Z,1528898013.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:34.244Z,1528898014.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:34.262Z,1528898014.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:34.646Z,1528898014.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:34.664Z,1528898014.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:35.044Z,1528898015.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:35.062Z,1528898015.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:35.450Z,1528898015.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:35.468Z,1528898015.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:35.849Z,1528898015.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:35.868Z,1528898015.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:36.249Z,1528898016.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:36.267Z,1528898016.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:36.645Z,1528898016.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:36.671Z,1528898016.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:37.046Z,1528898017.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:37.064Z,1528898017.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:37.445Z,1528898017.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:37.463Z,1528898017.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:37.844Z,1528898017.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:37.863Z,1528898017.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:38.250Z,1528898018.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:38.268Z,1528898018.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:38.654Z,1528898018.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:38.672Z,1528898018.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:39.050Z,1528898019.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:39.068Z,1528898019.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:39.443Z,1528898019.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:39.462Z,1528898019.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:39.845Z,1528898019.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:39.863Z,1528898019.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:40.246Z,1528898020.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:40.268Z,1528898020.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:40.645Z,1528898020.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:40.664Z,1528898020.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:41.042Z,1528898021.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:41.072Z,1528898021.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:41.450Z,1528898021.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:41.468Z,1528898021.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:41.854Z,1528898021.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:41.872Z,1528898021.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:42.250Z,1528898022.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:42.268Z,1528898022.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:42.644Z,1528898022.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:42.663Z,1528898022.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:43.042Z,1528898023.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:43.061Z,1528898023.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:43.444Z,1528898023.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:43.470Z,1528898023.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:43.844Z,1528898023.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:43.863Z,1528898023.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:44.249Z,1528898024.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:44.268Z,1528898024.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:44.653Z,1528898024.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:44.672Z,1528898024.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:45.050Z,1528898025.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:45.068Z,1528898025.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:45.442Z,1528898025.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:45.461Z,1528898025.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:45.844Z,1528898025.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:45.862Z,1528898025.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:46.245Z,1528898026.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:46.263Z,1528898026.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:46.646Z,1528898026.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:46.664Z,1528898026.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:47.043Z,1528898027.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:47.071Z,1528898027.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:47.450Z,1528898027.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:47.469Z,1528898027.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:47.855Z,1528898027.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:47.873Z,1528898027.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:48.255Z,1528898028.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:48.273Z,1528898028.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:48.645Z,1528898028.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:48.663Z,1528898028.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:49.042Z,1528898029.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:49.060Z,1528898029.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:49.446Z,1528898029.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:49.468Z,1528898029.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:49.843Z,1528898029.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:49.876Z,1528898029.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:50.257Z,1528898030.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:50.275Z,1528898030.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:50.659Z,1528898030.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:50.677Z,1528898030.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:51.055Z,1528898031.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:51.073Z,1528898031.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:51.435Z,1528898031.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:51.464Z,1528898031.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:51.839Z,1528898031.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:51.877Z,1528898031.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:52.239Z,1528898032.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:52.274Z,1528898032.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:52.639Z,1528898032.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:52.657Z,1528898032.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:53.043Z,1528898033.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:53.084Z,1528898033.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:53.453Z,1528898033.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:53.487Z,1528898033.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:53.853Z,1528898033.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:53.871Z,1528898033.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:54.250Z,1528898034.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:54.267Z,1528898034.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:54.644Z,1528898034.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:54.662Z,1528898034.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:55.043Z,1528898035.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:55.061Z,1528898035.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:55.444Z,1528898035.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:55.466Z,1528898035.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:55.844Z,1528898035.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:55.862Z,1528898035.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:56.249Z,1528898036.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:56.267Z,1528898036.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:56.653Z,1528898036.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:56.671Z,1528898036.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:57.050Z,1528898037.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:57.068Z,1528898037.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:57.442Z,1528898037.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:57.460Z,1528898037.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:57.844Z,1528898037.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:57.862Z,1528898037.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:58.243Z,1528898038.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:58.261Z,1528898038.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:58.646Z,1528898038.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:58.664Z,1528898038.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:59.045Z,1528898039.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:59.063Z,1528898039.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:59.450Z,1528898039.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:59.468Z,1528898039.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:53:59.849Z,1528898039.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:53:59.867Z,1528898039.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:00.250Z,1528898040.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:00.267Z,1528898040.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:00.644Z,1528898040.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:00.663Z,1528898040.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:01.042Z,1528898041.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:01.067Z,1528898041.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:01.447Z,1528898041.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:01.465Z,1528898041.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:01.468Z,1528898041.468 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T13:54:01.468Z,1528898041.468 [Default:CheckIn:C.Wait] Stopped
2018-06-13T13:54:01.468Z,1528898041.468 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T13:54:01.468Z,1528898041.468 [Default:CheckIn:D] Running Loop=1
2018-06-13T13:54:01.847Z,1528898041.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:01.865Z,1528898041.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:01.868Z,1528898041.868 [Default:CheckIn:D] Stopped
2018-06-13T13:54:01.869Z,1528898041.869 [Default:CheckIn:E] Running Loop=1
2018-06-13T13:54:04.969Z,1528898044.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:05.004Z,1528898045.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:05.007Z,1528898045.007 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 626.807031 min 
2018-06-13T13:54:05.007Z,1528898045.007 [Default:CheckIn:E] Stopped
2018-06-13T13:54:05.007Z,1528898045.007 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T13:54:05.007Z,1528898045.007 [Default:CheckIn] Stopped
2018-06-13T13:54:05.008Z,1528898045.008 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T13:54:05.008Z,1528898045.008 [Default:CheckIn](INFO): Running loop #61
2018-06-13T13:54:05.008Z,1528898045.008 [Default:CheckIn] Running Loop=61
2018-06-13T13:54:05.008Z,1528898045.008 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T13:54:05.008Z,1528898045.008 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T13:54:05.119Z,1528898045.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:05.155Z,1528898045.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:05.525Z,1528898045.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:05.559Z,1528898045.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:05.914Z,1528898045.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:05.932Z,1528898045.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:06.312Z,1528898046.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:06.330Z,1528898046.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:06.712Z,1528898046.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:06.741Z,1528898046.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:07.114Z,1528898047.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:07.133Z,1528898047.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:07.524Z,1528898047.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:07.548Z,1528898047.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:07.927Z,1528898047.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:07.952Z,1528898047.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:08.327Z,1528898048.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:08.345Z,1528898048.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:08.711Z,1528898048.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:08.745Z,1528898048.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:09.103Z,1528898049.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:09.141Z,1528898049.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:09.504Z,1528898049.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:09.534Z,1528898049.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:09.908Z,1528898049.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:09.944Z,1528898049.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:10.324Z,1528898050.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:10.342Z,1528898050.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:10.724Z,1528898050.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:10.742Z,1528898050.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:11.122Z,1528898051.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:11.154Z,1528898051.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:11.508Z,1528898051.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:11.542Z,1528898051.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:11.903Z,1528898051.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:11.935Z,1528898051.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:12.307Z,1528898052.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:12.346Z,1528898052.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:12.712Z,1528898052.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:12.748Z,1528898052.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:13.107Z,1528898053.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:13.141Z,1528898053.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:13.517Z,1528898053.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:13.552Z,1528898053.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:13.921Z,1528898053.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:13.951Z,1528898053.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:14.320Z,1528898054.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:14.354Z,1528898054.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:14.712Z,1528898054.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:14.730Z,1528898054.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:15.110Z,1528898055.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:15.128Z,1528898055.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:15.511Z,1528898055.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:15.529Z,1528898055.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:15.910Z,1528898055.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:15.928Z,1528898055.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:16.321Z,1528898056.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:16.356Z,1528898056.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:16.718Z,1528898056.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:16.736Z,1528898056.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:17.121Z,1528898057.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:17.139Z,1528898057.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:17.512Z,1528898057.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:17.531Z,1528898057.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:17.913Z,1528898057.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:17.931Z,1528898057.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:18.314Z,1528898058.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:18.332Z,1528898058.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:18.712Z,1528898058.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:18.731Z,1528898058.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:19.110Z,1528898059.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:19.127Z,1528898059.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:19.521Z,1528898059.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:19.539Z,1528898059.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:19.921Z,1528898059.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:19.939Z,1528898059.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:20.317Z,1528898060.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:20.335Z,1528898060.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:20.712Z,1528898060.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:20.730Z,1528898060.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:21.112Z,1528898061.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:21.130Z,1528898061.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:21.511Z,1528898061.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:21.529Z,1528898061.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:21.912Z,1528898061.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:21.936Z,1528898061.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:22.318Z,1528898062.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:22.336Z,1528898062.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:22.721Z,1528898062.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:22.739Z,1528898062.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:23.118Z,1528898063.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:23.136Z,1528898063.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:23.511Z,1528898063.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:23.544Z,1528898063.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:23.910Z,1528898063.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:23.928Z,1528898063.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:24.318Z,1528898064.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:24.336Z,1528898064.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:24.714Z,1528898064.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:24.732Z,1528898064.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:25.110Z,1528898065.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:25.128Z,1528898065.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:25.519Z,1528898065.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:25.538Z,1528898065.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:25.921Z,1528898065.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:25.939Z,1528898065.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:26.321Z,1528898066.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:26.339Z,1528898066.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:26.711Z,1528898066.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:26.743Z,1528898066.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:27.110Z,1528898067.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:27.128Z,1528898067.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:27.511Z,1528898067.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:27.529Z,1528898067.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:27.912Z,1528898067.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:27.942Z,1528898067.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:28.320Z,1528898068.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:28.339Z,1528898068.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:28.723Z,1528898068.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:28.741Z,1528898068.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:29.124Z,1528898069.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:29.142Z,1528898069.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:29.512Z,1528898069.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:29.531Z,1528898069.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:29.910Z,1528898069.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:29.928Z,1528898069.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:30.313Z,1528898070.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:30.332Z,1528898070.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:30.711Z,1528898070.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:30.744Z,1528898070.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:31.111Z,1528898071.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:31.129Z,1528898071.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:31.522Z,1528898071.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:31.545Z,1528898071.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:31.922Z,1528898071.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:31.939Z,1528898071.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:32.322Z,1528898072.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:32.340Z,1528898072.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:32.711Z,1528898072.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:32.734Z,1528898072.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:33.111Z,1528898073.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:33.144Z,1528898073.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:33.510Z,1528898073.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:33.528Z,1528898073.528 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:33.528Z,1528898073.528 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 209
2018-06-13T13:54:33.528Z,1528898073.528 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:54:33.530Z,1528898073.530 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:33.530Z,1528898073.530 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 209
2018-06-13T13:54:33.530Z,1528898073.530 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:54:33.532Z,1528898073.532 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:33.532Z,1528898073.532 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 209
2018-06-13T13:54:33.532Z,1528898073.532 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:54:33.605Z,1528898073.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:54:33.605Z,1528898073.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:54:33.606Z,1528898073.606 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:54:33.907Z,1528898073.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:34.025Z,1528898074.025 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:54:34.025Z,1528898074.025 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 209
2018-06-13T13:54:34.026Z,1528898074.026 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:54:34.026Z,1528898074.026 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 209
2018-06-13T13:54:34.026Z,1528898074.026 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:54:34.026Z,1528898074.026 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 209
2018-06-13T13:54:34.313Z,1528898074.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:34.352Z,1528898074.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:54:34.352Z,1528898074.352 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:54:34.353Z,1528898074.353 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:54:34.353Z,1528898074.353 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:54:34.354Z,1528898074.354 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:54:34.354Z,1528898074.354 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:54:34.354Z,1528898074.354 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:54:34.355Z,1528898074.355 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:54:34.355Z,1528898074.355 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:54:34.717Z,1528898074.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:34.749Z,1528898074.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:54:34.750Z,1528898074.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:35.123Z,1528898075.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:35.142Z,1528898075.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:54:35.143Z,1528898075.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:35.507Z,1528898075.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:35.543Z,1528898075.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:54:35.544Z,1528898075.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:35.904Z,1528898075.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:35.934Z,1528898075.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:54:35.935Z,1528898075.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:36.307Z,1528898076.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:36.340Z,1528898076.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:54:36.342Z,1528898076.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:36.703Z,1528898076.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:36.720Z,1528898076.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:54:36.721Z,1528898076.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:37.103Z,1528898077.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:37.121Z,1528898077.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:54:37.122Z,1528898077.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:37.517Z,1528898077.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:37.551Z,1528898077.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:54:37.552Z,1528898077.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:37.921Z,1528898077.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:37.948Z,1528898077.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:54:37.949Z,1528898077.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:38.320Z,1528898078.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:38.350Z,1528898078.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:54:38.351Z,1528898078.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:38.707Z,1528898078.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:38.724Z,1528898078.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:54:38.725Z,1528898078.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:39.111Z,1528898079.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:39.128Z,1528898079.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:54:39.129Z,1528898079.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:39.506Z,1528898079.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:39.524Z,1528898079.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:54:39.525Z,1528898079.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:39.910Z,1528898079.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:39.928Z,1528898079.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:54:39.929Z,1528898079.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:40.321Z,1528898080.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:40.353Z,1528898080.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:54:40.354Z,1528898080.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:40.721Z,1528898080.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:40.751Z,1528898080.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:54:40.752Z,1528898080.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:41.121Z,1528898081.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:41.155Z,1528898081.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:54:41.156Z,1528898081.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:41.507Z,1528898081.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:41.531Z,1528898081.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:54:41.532Z,1528898081.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:41.910Z,1528898081.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:41.927Z,1528898081.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:54:41.928Z,1528898081.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:42.312Z,1528898082.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:42.329Z,1528898082.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:54:42.330Z,1528898082.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:42.712Z,1528898082.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:42.751Z,1528898082.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:54:42.752Z,1528898082.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:43.112Z,1528898083.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:43.130Z,1528898083.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:54:43.131Z,1528898083.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:43.517Z,1528898083.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:43.535Z,1528898083.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:54:43.536Z,1528898083.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:43.917Z,1528898083.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:43.939Z,1528898083.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:54:43.940Z,1528898083.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:44.321Z,1528898084.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:44.339Z,1528898084.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:54:44.340Z,1528898084.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:44.712Z,1528898084.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:44.730Z,1528898084.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T13:54:44.731Z,1528898084.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:45.111Z,1528898085.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:45.129Z,1528898085.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T13:54:45.130Z,1528898085.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:45.514Z,1528898085.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:45.532Z,1528898085.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T13:54:45.533Z,1528898085.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:45.913Z,1528898085.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:45.931Z,1528898085.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T13:54:45.931Z,1528898085.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:46.317Z,1528898086.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:46.334Z,1528898086.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T13:54:46.335Z,1528898086.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:46.717Z,1528898086.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:46.735Z,1528898086.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T13:54:46.736Z,1528898086.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:47.118Z,1528898087.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:47.135Z,1528898087.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T13:54:47.136Z,1528898087.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:47.514Z,1528898087.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:47.535Z,1528898087.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T13:54:47.536Z,1528898087.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:47.914Z,1528898087.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:47.931Z,1528898087.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T13:54:47.932Z,1528898087.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:48.306Z,1528898088.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:48.336Z,1528898088.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T13:54:48.337Z,1528898088.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:48.710Z,1528898088.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:48.727Z,1528898088.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T13:54:48.728Z,1528898088.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:49.114Z,1528898089.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:49.132Z,1528898089.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T13:54:49.133Z,1528898089.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:49.522Z,1528898089.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:49.560Z,1528898089.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T13:54:49.565Z,1528898089.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:49.917Z,1528898089.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:49.939Z,1528898089.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T13:54:49.940Z,1528898089.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:50.322Z,1528898090.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:50.339Z,1528898090.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T13:54:50.340Z,1528898090.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:50.712Z,1528898090.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:50.742Z,1528898090.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T13:54:50.743Z,1528898090.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:51.113Z,1528898091.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:51.130Z,1528898091.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T13:54:51.131Z,1528898091.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:51.515Z,1528898091.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:51.533Z,1528898091.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T13:54:51.534Z,1528898091.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:51.911Z,1528898091.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:51.942Z,1528898091.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T13:54:51.943Z,1528898091.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:52.319Z,1528898092.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:52.343Z,1528898092.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T13:54:52.344Z,1528898092.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:52.721Z,1528898092.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:52.740Z,1528898092.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T13:54:52.741Z,1528898092.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:53.118Z,1528898093.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:53.136Z,1528898093.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T13:54:53.137Z,1528898093.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:53.512Z,1528898093.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:53.530Z,1528898093.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:53.914Z,1528898093.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:53.932Z,1528898093.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:54.311Z,1528898094.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:54.343Z,1528898094.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:54.713Z,1528898094.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:54.731Z,1528898094.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:55.114Z,1528898095.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:55.132Z,1528898095.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:55.518Z,1528898095.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:55.536Z,1528898095.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:55.922Z,1528898095.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:55.944Z,1528898095.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:56.323Z,1528898096.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:56.341Z,1528898096.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:56.711Z,1528898096.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:56.734Z,1528898096.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:57.111Z,1528898097.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:57.135Z,1528898097.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:57.515Z,1528898097.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:57.532Z,1528898097.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:57.911Z,1528898097.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:57.934Z,1528898097.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:58.322Z,1528898098.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:58.341Z,1528898098.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:58.723Z,1528898098.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:58.740Z,1528898098.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:59.122Z,1528898099.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:59.144Z,1528898099.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:59.511Z,1528898099.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:59.535Z,1528898099.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:54:59.914Z,1528898099.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:54:59.932Z,1528898099.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:00.311Z,1528898100.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:00.334Z,1528898100.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:00.711Z,1528898100.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:00.735Z,1528898100.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:01.115Z,1528898101.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:01.132Z,1528898101.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:01.526Z,1528898101.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:01.543Z,1528898101.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:01.925Z,1528898101.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:01.948Z,1528898101.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:05.036Z,1528898105.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:05.071Z,1528898105.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:05.191Z,1528898105.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:05.228Z,1528898105.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:05.584Z,1528898105.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:05.617Z,1528898105.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:05.990Z,1528898105.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:06.008Z,1528898106.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:06.398Z,1528898106.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:06.436Z,1528898106.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:06.793Z,1528898106.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:06.810Z,1528898106.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:07.203Z,1528898107.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:07.237Z,1528898107.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:07.586Z,1528898107.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:07.604Z,1528898107.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:07.986Z,1528898107.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:08.004Z,1528898108.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:08.386Z,1528898108.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:08.404Z,1528898108.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:08.786Z,1528898108.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:08.804Z,1528898108.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:09.187Z,1528898109.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:09.206Z,1528898109.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:09.598Z,1528898109.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:09.616Z,1528898109.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:09.997Z,1528898109.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:10.015Z,1528898110.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:10.394Z,1528898110.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:10.412Z,1528898110.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:10.790Z,1528898110.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:10.808Z,1528898110.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:11.188Z,1528898111.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:11.207Z,1528898111.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:11.588Z,1528898111.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:11.618Z,1528898111.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:11.990Z,1528898111.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:12.016Z,1528898112.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:12.398Z,1528898112.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:12.416Z,1528898112.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:12.800Z,1528898112.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:12.818Z,1528898112.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:13.202Z,1528898113.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:13.220Z,1528898113.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:13.590Z,1528898113.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:13.608Z,1528898113.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:13.988Z,1528898113.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:14.018Z,1528898114.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:14.380Z,1528898114.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:14.410Z,1528898114.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:14.784Z,1528898114.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:14.820Z,1528898114.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:15.184Z,1528898115.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:15.213Z,1528898115.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:15.606Z,1528898115.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:15.623Z,1528898115.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:16.004Z,1528898116.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:16.028Z,1528898116.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:16.400Z,1528898116.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:16.425Z,1528898116.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:16.779Z,1528898116.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:16.820Z,1528898116.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:17.183Z,1528898117.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:17.217Z,1528898117.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:17.584Z,1528898117.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:17.623Z,1528898117.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:17.983Z,1528898117.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:18.021Z,1528898118.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:18.397Z,1528898118.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:18.425Z,1528898118.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:18.797Z,1528898118.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:18.827Z,1528898118.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:19.197Z,1528898119.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:19.226Z,1528898119.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:19.583Z,1528898119.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:19.617Z,1528898119.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:19.983Z,1528898119.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:20.004Z,1528898120.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:20.380Z,1528898120.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:20.398Z,1528898120.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:20.787Z,1528898120.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:20.805Z,1528898120.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:21.186Z,1528898121.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:21.204Z,1528898121.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:21.593Z,1528898121.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:21.611Z,1528898121.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:21.997Z,1528898121.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:22.015Z,1528898122.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:22.394Z,1528898122.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:22.412Z,1528898122.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:22.788Z,1528898122.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:22.807Z,1528898122.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:23.188Z,1528898123.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:23.206Z,1528898123.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:23.589Z,1528898123.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:23.607Z,1528898123.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:23.985Z,1528898123.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:24.004Z,1528898124.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:24.394Z,1528898124.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:24.412Z,1528898124.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:24.798Z,1528898124.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:24.816Z,1528898124.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:25.197Z,1528898125.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:25.215Z,1528898125.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:25.590Z,1528898125.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:25.608Z,1528898125.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:25.988Z,1528898125.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:26.006Z,1528898126.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:26.386Z,1528898126.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:26.404Z,1528898126.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:26.788Z,1528898126.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:26.806Z,1528898126.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:27.188Z,1528898127.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:27.206Z,1528898127.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:27.594Z,1528898127.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:27.612Z,1528898127.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:27.997Z,1528898127.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:28.015Z,1528898128.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:28.394Z,1528898128.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:28.412Z,1528898128.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:28.786Z,1528898128.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:28.804Z,1528898128.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:29.188Z,1528898129.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:29.206Z,1528898129.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:29.588Z,1528898129.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:29.607Z,1528898129.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:29.988Z,1528898129.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:30.006Z,1528898130.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:30.398Z,1528898130.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:30.415Z,1528898130.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:30.797Z,1528898130.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:30.815Z,1528898130.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:31.193Z,1528898131.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:31.216Z,1528898131.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:31.588Z,1528898131.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:31.606Z,1528898131.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:31.988Z,1528898131.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:32.006Z,1528898132.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:32.386Z,1528898132.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:32.404Z,1528898132.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:32.788Z,1528898132.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:32.810Z,1528898132.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:33.189Z,1528898133.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:33.207Z,1528898133.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:33.593Z,1528898133.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:33.611Z,1528898133.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:34.001Z,1528898134.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:34.019Z,1528898134.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:34.399Z,1528898134.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:34.417Z,1528898134.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:34.787Z,1528898134.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:34.805Z,1528898134.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:35.187Z,1528898135.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:35.220Z,1528898135.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:35.587Z,1528898135.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:35.616Z,1528898135.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:35.986Z,1528898135.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:36.004Z,1528898136.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:36.394Z,1528898136.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:36.437Z,1528898136.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:36.798Z,1528898136.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:36.839Z,1528898136.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:37.195Z,1528898137.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:37.214Z,1528898137.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:37.589Z,1528898137.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:37.607Z,1528898137.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:37.987Z,1528898137.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:38.020Z,1528898138.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:38.385Z,1528898138.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:38.404Z,1528898138.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:38.789Z,1528898138.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:38.807Z,1528898138.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:39.188Z,1528898139.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:39.207Z,1528898139.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:39.594Z,1528898139.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:39.613Z,1528898139.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:39.997Z,1528898139.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:40.015Z,1528898140.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:40.394Z,1528898140.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:40.416Z,1528898140.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:40.786Z,1528898140.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:40.804Z,1528898140.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:41.189Z,1528898141.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:41.208Z,1528898141.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:41.587Z,1528898141.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:41.619Z,1528898141.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:41.987Z,1528898141.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:42.004Z,1528898142.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:42.394Z,1528898142.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:42.416Z,1528898142.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:42.798Z,1528898142.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:42.815Z,1528898142.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:43.195Z,1528898143.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:43.213Z,1528898143.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:43.587Z,1528898143.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:43.610Z,1528898143.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:43.990Z,1528898143.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:44.012Z,1528898144.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:44.385Z,1528898144.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:44.404Z,1528898144.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:44.790Z,1528898144.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:44.808Z,1528898144.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:45.187Z,1528898145.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:45.221Z,1528898145.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:45.599Z,1528898145.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:45.617Z,1528898145.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:45.998Z,1528898145.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:46.024Z,1528898146.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:46.399Z,1528898146.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:46.418Z,1528898146.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:46.790Z,1528898146.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:46.808Z,1528898146.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:47.187Z,1528898147.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:47.210Z,1528898147.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:47.587Z,1528898147.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:47.612Z,1528898147.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:47.985Z,1528898147.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:48.003Z,1528898148.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:48.398Z,1528898148.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:48.416Z,1528898148.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:48.798Z,1528898148.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:48.824Z,1528898148.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:49.199Z,1528898149.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:49.216Z,1528898149.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:49.587Z,1528898149.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:49.610Z,1528898149.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:49.987Z,1528898149.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:50.011Z,1528898150.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:50.386Z,1528898150.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:50.404Z,1528898150.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:50.779Z,1528898150.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:50.808Z,1528898150.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:51.183Z,1528898151.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:51.216Z,1528898151.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:51.601Z,1528898151.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:51.619Z,1528898151.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:52.003Z,1528898152.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:52.021Z,1528898152.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:52.400Z,1528898152.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:52.418Z,1528898152.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:52.783Z,1528898152.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:52.822Z,1528898152.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:53.187Z,1528898153.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:53.214Z,1528898153.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:53.585Z,1528898153.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:53.614Z,1528898153.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:53.983Z,1528898153.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:54.017Z,1528898154.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:54.400Z,1528898154.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:54.418Z,1528898154.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:54.803Z,1528898154.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:54.822Z,1528898154.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:55.202Z,1528898155.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:55.220Z,1528898155.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:55.579Z,1528898155.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:55.610Z,1528898155.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:55.983Z,1528898155.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:56.021Z,1528898156.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:56.383Z,1528898156.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:56.418Z,1528898156.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:56.783Z,1528898156.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:56.802Z,1528898156.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:57.183Z,1528898157.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:57.201Z,1528898157.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:57.597Z,1528898157.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:57.634Z,1528898157.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:57.997Z,1528898157.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:58.032Z,1528898158.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:58.401Z,1528898158.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:58.440Z,1528898158.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:58.788Z,1528898158.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:58.806Z,1528898158.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:59.188Z,1528898159.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:59.205Z,1528898159.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:59.588Z,1528898159.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:55:59.619Z,1528898159.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:55:59.986Z,1528898159.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:00.003Z,1528898160.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:00.394Z,1528898160.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:00.413Z,1528898160.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:00.797Z,1528898160.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:00.815Z,1528898160.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:01.195Z,1528898161.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:01.213Z,1528898161.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:01.590Z,1528898161.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:01.608Z,1528898161.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:01.991Z,1528898161.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:02.008Z,1528898162.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:05.098Z,1528898165.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:05.116Z,1528898165.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:05.255Z,1528898165.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:05.296Z,1528898165.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:05.661Z,1528898165.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:05.695Z,1528898165.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:06.069Z,1528898166.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:06.096Z,1528898166.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:06.462Z,1528898166.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:06.494Z,1528898166.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:06.850Z,1528898166.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:06.868Z,1528898166.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:07.250Z,1528898167.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:07.268Z,1528898167.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:07.649Z,1528898167.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:07.672Z,1528898167.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:08.050Z,1528898168.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:08.068Z,1528898168.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:08.462Z,1528898168.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:08.496Z,1528898168.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:08.861Z,1528898168.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:08.895Z,1528898168.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:09.261Z,1528898169.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:09.279Z,1528898169.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:09.650Z,1528898169.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:09.667Z,1528898169.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:10.052Z,1528898170.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:10.069Z,1528898170.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:10.452Z,1528898170.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:10.476Z,1528898170.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:10.853Z,1528898170.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:10.871Z,1528898170.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:11.252Z,1528898171.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:11.270Z,1528898171.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:11.658Z,1528898171.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:11.676Z,1528898171.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:12.057Z,1528898172.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:12.075Z,1528898172.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:12.457Z,1528898172.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:12.475Z,1528898172.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:12.851Z,1528898172.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:12.876Z,1528898172.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:13.253Z,1528898173.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:13.271Z,1528898173.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:13.653Z,1528898173.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:13.671Z,1528898173.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:14.052Z,1528898174.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:14.071Z,1528898174.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:14.461Z,1528898174.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:14.479Z,1528898174.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:14.861Z,1528898174.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:14.879Z,1528898174.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:15.259Z,1528898175.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:15.277Z,1528898175.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:15.650Z,1528898175.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:15.668Z,1528898175.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:16.053Z,1528898176.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:16.071Z,1528898176.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:16.451Z,1528898176.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:16.485Z,1528898176.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:16.854Z,1528898176.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:16.872Z,1528898176.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:17.253Z,1528898177.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:17.270Z,1528898177.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:17.662Z,1528898177.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:17.680Z,1528898177.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:18.063Z,1528898178.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:18.081Z,1528898178.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:18.462Z,1528898178.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:18.484Z,1528898178.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:18.853Z,1528898178.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:18.871Z,1528898178.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:19.254Z,1528898179.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:19.272Z,1528898179.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:19.654Z,1528898179.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:19.672Z,1528898179.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:20.047Z,1528898180.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:20.078Z,1528898180.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:20.467Z,1528898180.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:20.485Z,1528898180.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:20.864Z,1528898180.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:20.888Z,1528898180.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:21.263Z,1528898181.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:21.281Z,1528898181.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:21.654Z,1528898181.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:21.672Z,1528898181.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:22.051Z,1528898182.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:22.082Z,1528898182.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:22.447Z,1528898182.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:22.481Z,1528898182.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:22.860Z,1528898182.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:22.878Z,1528898182.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:23.247Z,1528898183.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:23.284Z,1528898183.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:23.664Z,1528898183.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:23.682Z,1528898183.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:24.068Z,1528898184.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:24.087Z,1528898184.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:24.463Z,1528898184.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:24.481Z,1528898184.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:24.847Z,1528898184.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:24.889Z,1528898184.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:25.247Z,1528898185.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:25.281Z,1528898185.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:25.647Z,1528898185.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:25.682Z,1528898185.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:26.047Z,1528898186.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:26.095Z,1528898186.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:26.457Z,1528898186.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:26.495Z,1528898186.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:26.866Z,1528898186.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:26.894Z,1528898186.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:27.261Z,1528898187.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:27.300Z,1528898187.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:27.650Z,1528898187.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:27.668Z,1528898187.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:28.050Z,1528898188.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:28.068Z,1528898188.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:28.450Z,1528898188.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:28.468Z,1528898188.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:28.846Z,1528898188.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:28.864Z,1528898188.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:29.250Z,1528898189.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:29.268Z,1528898189.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:29.661Z,1528898189.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:29.695Z,1528898189.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:30.061Z,1528898190.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:30.079Z,1528898190.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:30.458Z,1528898190.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:30.475Z,1528898190.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:30.846Z,1528898190.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:30.876Z,1528898190.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:31.252Z,1528898191.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:31.270Z,1528898191.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:31.653Z,1528898191.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:31.671Z,1528898191.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:32.052Z,1528898192.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:32.076Z,1528898192.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:32.457Z,1528898192.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:32.475Z,1528898192.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:32.857Z,1528898192.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:32.875Z,1528898192.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:33.258Z,1528898193.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:33.276Z,1528898193.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:33.652Z,1528898193.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:33.671Z,1528898193.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:34.052Z,1528898194.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:34.070Z,1528898194.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:34.454Z,1528898194.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:34.472Z,1528898194.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:34.853Z,1528898194.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:34.871Z,1528898194.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:35.251Z,1528898195.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:35.269Z,1528898195.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:35.657Z,1528898195.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:35.676Z,1528898195.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:36.057Z,1528898196.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:36.075Z,1528898196.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:36.461Z,1528898196.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:36.479Z,1528898196.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:36.852Z,1528898196.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:36.870Z,1528898196.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:37.250Z,1528898197.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:37.268Z,1528898197.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:37.652Z,1528898197.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:37.680Z,1528898197.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:38.052Z,1528898198.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:38.070Z,1528898198.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:38.460Z,1528898198.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:38.478Z,1528898198.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:38.865Z,1528898198.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:38.883Z,1528898198.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:39.261Z,1528898199.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:39.279Z,1528898199.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:39.650Z,1528898199.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:39.667Z,1528898199.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:40.051Z,1528898200.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:40.083Z,1528898200.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:40.452Z,1528898200.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:40.481Z,1528898200.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:40.851Z,1528898200.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:40.869Z,1528898200.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:41.255Z,1528898201.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:41.273Z,1528898201.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:41.659Z,1528898201.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:41.677Z,1528898201.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:42.062Z,1528898202.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:42.080Z,1528898202.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:42.458Z,1528898202.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:42.484Z,1528898202.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:42.851Z,1528898202.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:42.885Z,1528898202.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:43.255Z,1528898203.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:43.274Z,1528898203.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:43.653Z,1528898203.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:43.671Z,1528898203.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:44.049Z,1528898204.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:44.067Z,1528898204.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:44.463Z,1528898204.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:44.480Z,1528898204.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:44.862Z,1528898204.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:44.884Z,1528898204.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:45.262Z,1528898205.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:45.288Z,1528898205.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:45.650Z,1528898205.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:45.667Z,1528898205.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:46.052Z,1528898206.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:46.070Z,1528898206.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:46.452Z,1528898206.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:46.470Z,1528898206.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:46.854Z,1528898206.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:46.872Z,1528898206.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:47.253Z,1528898207.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:47.270Z,1528898207.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:47.662Z,1528898207.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:47.684Z,1528898207.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:48.063Z,1528898208.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:48.081Z,1528898208.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:48.462Z,1528898208.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:48.484Z,1528898208.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:48.853Z,1528898208.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:48.870Z,1528898208.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:49.249Z,1528898209.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:49.272Z,1528898209.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:49.652Z,1528898209.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:49.670Z,1528898209.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:50.046Z,1528898210.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:50.080Z,1528898210.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:50.463Z,1528898210.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:50.480Z,1528898210.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:50.861Z,1528898210.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:50.879Z,1528898210.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:51.262Z,1528898211.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:51.279Z,1528898211.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:51.653Z,1528898211.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:51.671Z,1528898211.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:52.053Z,1528898212.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:52.070Z,1528898212.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:52.452Z,1528898212.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:52.476Z,1528898212.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:52.855Z,1528898212.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:52.873Z,1528898212.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:53.253Z,1528898213.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:53.271Z,1528898213.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:53.659Z,1528898213.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:53.677Z,1528898213.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:54.062Z,1528898214.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:54.080Z,1528898214.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:54.462Z,1528898214.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:54.484Z,1528898214.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:54.853Z,1528898214.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:54.872Z,1528898214.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:55.253Z,1528898215.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:55.271Z,1528898215.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:55.653Z,1528898215.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:55.671Z,1528898215.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:56.052Z,1528898216.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:56.070Z,1528898216.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:56.462Z,1528898216.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:56.480Z,1528898216.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:56.862Z,1528898216.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:56.884Z,1528898216.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:57.262Z,1528898217.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:57.287Z,1528898217.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:57.655Z,1528898217.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:57.672Z,1528898217.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:58.053Z,1528898218.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:58.071Z,1528898218.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:58.453Z,1528898218.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:58.471Z,1528898218.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:58.855Z,1528898218.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:58.880Z,1528898218.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:59.253Z,1528898219.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:59.271Z,1528898219.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:56:59.662Z,1528898219.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:56:59.688Z,1528898219.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:00.063Z,1528898220.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:00.080Z,1528898220.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:00.463Z,1528898220.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:00.480Z,1528898220.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:00.853Z,1528898220.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:00.870Z,1528898220.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:01.254Z,1528898221.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:01.276Z,1528898221.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:01.653Z,1528898221.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:01.671Z,1528898221.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:02.054Z,1528898222.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:02.072Z,1528898222.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:05.173Z,1528898225.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:05.191Z,1528898225.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:05.351Z,1528898225.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:05.385Z,1528898225.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:05.738Z,1528898225.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:05.765Z,1528898225.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:06.130Z,1528898226.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:06.164Z,1528898226.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:06.527Z,1528898226.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:06.545Z,1528898226.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:06.927Z,1528898226.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:06.972Z,1528898226.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:07.327Z,1528898227.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:07.345Z,1528898227.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:07.737Z,1528898227.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:07.772Z,1528898227.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:08.133Z,1528898228.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:08.173Z,1528898228.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:08.541Z,1528898228.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:08.568Z,1528898228.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:08.927Z,1528898228.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:08.944Z,1528898228.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:09.327Z,1528898229.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:09.345Z,1528898229.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:09.727Z,1528898229.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:09.745Z,1528898229.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:10.126Z,1528898230.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:10.144Z,1528898230.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:10.538Z,1528898230.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:10.575Z,1528898230.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:10.938Z,1528898230.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:10.956Z,1528898230.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:11.334Z,1528898231.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:11.352Z,1528898231.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:11.728Z,1528898231.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:11.746Z,1528898231.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:12.129Z,1528898232.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:12.152Z,1528898232.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:12.528Z,1528898232.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:12.552Z,1528898232.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:12.928Z,1528898232.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:12.946Z,1528898232.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:13.329Z,1528898233.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:13.352Z,1528898233.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:13.737Z,1528898233.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:13.755Z,1528898233.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:14.137Z,1528898234.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:14.155Z,1528898234.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:14.538Z,1528898234.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:14.556Z,1528898234.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:14.927Z,1528898234.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:14.950Z,1528898234.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:15.330Z,1528898235.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:15.348Z,1528898235.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:15.731Z,1528898235.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:15.749Z,1528898235.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:16.127Z,1528898236.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:16.150Z,1528898236.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:16.534Z,1528898236.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:16.552Z,1528898236.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:16.937Z,1528898236.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:16.955Z,1528898236.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:17.335Z,1528898237.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:17.352Z,1528898237.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:17.727Z,1528898237.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:17.759Z,1528898237.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:18.131Z,1528898238.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:18.149Z,1528898238.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:18.527Z,1528898238.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:18.549Z,1528898238.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:18.927Z,1528898238.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:18.960Z,1528898238.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:19.330Z,1528898239.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:19.356Z,1528898239.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:19.734Z,1528898239.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:19.756Z,1528898239.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:20.137Z,1528898240.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:20.155Z,1528898240.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:20.538Z,1528898240.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:20.555Z,1528898240.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:20.927Z,1528898240.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:20.958Z,1528898240.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:21.327Z,1528898241.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:21.369Z,1528898241.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:21.731Z,1528898241.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:21.749Z,1528898241.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:22.127Z,1528898242.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:22.159Z,1528898242.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:22.535Z,1528898242.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:22.553Z,1528898242.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:22.937Z,1528898242.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:22.955Z,1528898242.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:23.334Z,1528898243.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:23.352Z,1528898243.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:23.730Z,1528898243.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:23.748Z,1528898243.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:24.126Z,1528898244.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:24.145Z,1528898244.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:24.530Z,1528898244.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:24.548Z,1528898244.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:24.928Z,1528898244.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:24.951Z,1528898244.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:25.331Z,1528898245.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:25.349Z,1528898245.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:25.739Z,1528898245.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:25.757Z,1528898245.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:26.139Z,1528898246.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:26.164Z,1528898246.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:26.540Z,1528898246.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:26.558Z,1528898246.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:26.928Z,1528898246.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:26.959Z,1528898246.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:27.323Z,1528898247.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:27.366Z,1528898247.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:27.720Z,1528898247.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:27.756Z,1528898247.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:28.123Z,1528898248.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:28.160Z,1528898248.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:28.539Z,1528898248.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:28.558Z,1528898248.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:28.941Z,1528898248.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:28.960Z,1528898248.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:29.338Z,1528898249.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:29.360Z,1528898249.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:29.723Z,1528898249.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:29.769Z,1528898249.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:30.123Z,1528898250.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:30.151Z,1528898250.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:30.523Z,1528898250.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:30.550Z,1528898250.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:30.924Z,1528898250.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:30.953Z,1528898250.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:31.319Z,1528898251.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:31.353Z,1528898251.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:31.744Z,1528898251.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:31.762Z,1528898251.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:32.143Z,1528898252.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:32.161Z,1528898252.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:32.541Z,1528898252.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:32.559Z,1528898252.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:32.923Z,1528898252.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:32.961Z,1528898252.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:33.323Z,1528898253.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:33.360Z,1528898253.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:33.721Z,1528898253.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:33.755Z,1528898253.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:34.123Z,1528898254.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:34.156Z,1528898254.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:34.537Z,1528898254.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:34.572Z,1528898254.572 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:34.572Z,1528898254.572 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 210
2018-06-13T13:57:34.572Z,1528898254.572 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T13:57:34.574Z,1528898254.574 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:34.574Z,1528898254.574 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 210
2018-06-13T13:57:34.574Z,1528898254.574 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T13:57:34.576Z,1528898254.576 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:34.576Z,1528898254.576 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 210
2018-06-13T13:57:34.576Z,1528898254.576 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T13:57:34.657Z,1528898254.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T13:57:34.657Z,1528898254.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T13:57:34.657Z,1528898254.657 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T13:57:34.937Z,1528898254.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:35.061Z,1528898255.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T13:57:35.061Z,1528898255.061 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 210
2018-06-13T13:57:35.062Z,1528898255.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T13:57:35.062Z,1528898255.062 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 210
2018-06-13T13:57:35.062Z,1528898255.062 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T13:57:35.062Z,1528898255.062 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 210
2018-06-13T13:57:35.337Z,1528898255.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:35.363Z,1528898255.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T13:57:35.363Z,1528898255.363 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:57:35.364Z,1528898255.364 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:57:35.364Z,1528898255.364 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T13:57:35.365Z,1528898255.365 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:57:35.365Z,1528898255.365 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:57:35.365Z,1528898255.365 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T13:57:35.366Z,1528898255.366 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T13:57:35.366Z,1528898255.366 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T13:57:35.727Z,1528898255.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:35.745Z,1528898255.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T13:57:35.746Z,1528898255.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:36.124Z,1528898256.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:36.142Z,1528898256.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T13:57:36.143Z,1528898256.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:36.526Z,1528898256.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:36.548Z,1528898256.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T13:57:36.549Z,1528898256.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:36.926Z,1528898256.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:36.943Z,1528898256.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T13:57:36.944Z,1528898256.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:37.324Z,1528898257.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:37.342Z,1528898257.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T13:57:37.343Z,1528898257.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:37.737Z,1528898257.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:37.772Z,1528898257.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T13:57:37.777Z,1528898257.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:38.137Z,1528898258.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:38.178Z,1528898258.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T13:57:38.179Z,1528898258.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:38.533Z,1528898258.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:38.551Z,1528898258.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T13:57:38.552Z,1528898258.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:38.926Z,1528898258.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:38.943Z,1528898258.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T13:57:38.944Z,1528898258.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:39.328Z,1528898259.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:39.352Z,1528898259.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T13:57:39.353Z,1528898259.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:39.729Z,1528898259.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:39.747Z,1528898259.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T13:57:39.748Z,1528898259.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:40.128Z,1528898260.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:40.152Z,1528898260.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T13:57:40.152Z,1528898260.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:40.534Z,1528898260.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:40.552Z,1528898260.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T13:57:40.553Z,1528898260.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:40.933Z,1528898260.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:40.951Z,1528898260.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T13:57:40.952Z,1528898260.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:41.334Z,1528898261.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:41.351Z,1528898261.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T13:57:41.352Z,1528898261.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:41.728Z,1528898261.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:41.751Z,1528898261.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T13:57:41.752Z,1528898261.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:42.128Z,1528898262.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:42.146Z,1528898262.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T13:57:42.147Z,1528898262.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:42.528Z,1528898262.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:42.552Z,1528898262.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T13:57:42.553Z,1528898262.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:42.928Z,1528898262.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:42.946Z,1528898262.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T13:57:42.947Z,1528898262.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:43.326Z,1528898263.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:43.343Z,1528898263.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T13:57:43.344Z,1528898263.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:43.734Z,1528898263.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:43.751Z,1528898263.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T13:57:43.752Z,1528898263.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:44.137Z,1528898264.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:44.155Z,1528898264.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T13:57:44.156Z,1528898264.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:44.535Z,1528898264.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:44.554Z,1528898264.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T13:57:44.555Z,1528898264.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:44.927Z,1528898264.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:44.958Z,1528898264.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T13:57:44.959Z,1528898264.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:45.327Z,1528898265.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:45.360Z,1528898265.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T13:57:45.361Z,1528898265.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:45.727Z,1528898265.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:45.744Z,1528898265.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T13:57:45.745Z,1528898265.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:46.127Z,1528898266.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:46.158Z,1528898266.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T13:57:46.159Z,1528898266.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:46.534Z,1528898266.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:46.552Z,1528898266.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T13:57:46.553Z,1528898266.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:46.941Z,1528898266.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:46.959Z,1528898266.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T13:57:46.960Z,1528898266.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:47.339Z,1528898267.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:47.356Z,1528898267.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T13:57:47.358Z,1528898267.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:47.727Z,1528898267.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:47.751Z,1528898267.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T13:57:47.752Z,1528898267.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:48.127Z,1528898268.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:48.144Z,1528898268.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T13:57:48.146Z,1528898268.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:48.519Z,1528898268.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:48.557Z,1528898268.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T13:57:48.558Z,1528898268.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:48.924Z,1528898268.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:48.960Z,1528898268.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T13:57:48.961Z,1528898268.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:49.323Z,1528898269.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:49.357Z,1528898269.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T13:57:49.358Z,1528898269.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:49.741Z,1528898269.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:49.764Z,1528898269.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T13:57:49.765Z,1528898269.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:50.140Z,1528898270.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:50.174Z,1528898270.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T13:57:50.175Z,1528898270.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:50.533Z,1528898270.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:50.562Z,1528898270.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T13:57:50.562Z,1528898270.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:50.923Z,1528898270.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:50.953Z,1528898270.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T13:57:50.954Z,1528898270.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:51.323Z,1528898271.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:51.364Z,1528898271.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T13:57:51.366Z,1528898271.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:51.724Z,1528898271.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:51.761Z,1528898271.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T13:57:51.762Z,1528898271.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:52.124Z,1528898272.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:52.168Z,1528898272.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T13:57:52.169Z,1528898272.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:52.537Z,1528898272.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:52.573Z,1528898272.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T13:57:52.574Z,1528898272.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:52.937Z,1528898272.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:52.971Z,1528898272.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T13:57:52.972Z,1528898272.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:53.337Z,1528898273.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:53.371Z,1528898273.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T13:57:53.372Z,1528898273.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:53.726Z,1528898273.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:53.744Z,1528898273.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T13:57:53.745Z,1528898273.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:54.129Z,1528898274.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:54.147Z,1528898274.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T13:57:54.148Z,1528898274.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:54.528Z,1528898274.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:54.552Z,1528898274.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T13:57:54.553Z,1528898274.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:54.928Z,1528898274.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:54.954Z,1528898274.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:55.326Z,1528898275.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:55.344Z,1528898275.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:55.734Z,1528898275.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:55.752Z,1528898275.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:56.137Z,1528898276.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:56.156Z,1528898276.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:56.535Z,1528898276.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:56.560Z,1528898276.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:56.930Z,1528898276.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:56.948Z,1528898276.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:57.327Z,1528898277.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:57.359Z,1528898277.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:57.727Z,1528898277.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:57.744Z,1528898277.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:58.127Z,1528898278.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:58.149Z,1528898278.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:58.534Z,1528898278.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:58.556Z,1528898278.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:58.937Z,1528898278.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:58.955Z,1528898278.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:59.334Z,1528898279.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:59.356Z,1528898279.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:57:59.727Z,1528898279.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:57:59.760Z,1528898279.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:00.127Z,1528898280.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:00.145Z,1528898280.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:00.534Z,1528898280.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:00.552Z,1528898280.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:00.937Z,1528898280.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:00.956Z,1528898280.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:01.336Z,1528898281.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:01.354Z,1528898281.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:01.734Z,1528898281.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:01.752Z,1528898281.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:02.130Z,1528898282.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:02.148Z,1528898282.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:05.247Z,1528898285.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:05.286Z,1528898285.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:05.429Z,1528898285.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:05.464Z,1528898285.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:05.824Z,1528898285.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:05.842Z,1528898285.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:06.208Z,1528898286.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:06.239Z,1528898286.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:06.603Z,1528898286.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:06.640Z,1528898286.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:07.004Z,1528898287.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:07.031Z,1528898287.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:07.403Z,1528898287.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:07.422Z,1528898287.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:07.822Z,1528898287.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:07.849Z,1528898287.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:08.221Z,1528898288.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:08.250Z,1528898288.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:08.617Z,1528898288.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:08.652Z,1528898288.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:09.004Z,1528898289.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:09.022Z,1528898289.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:09.404Z,1528898289.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:09.434Z,1528898289.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:09.809Z,1528898289.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:09.827Z,1528898289.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:10.208Z,1528898290.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:10.226Z,1528898290.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:10.617Z,1528898290.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:10.648Z,1528898290.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:11.017Z,1528898291.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:11.035Z,1528898291.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:11.418Z,1528898291.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:11.436Z,1528898291.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:11.810Z,1528898291.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:11.828Z,1528898291.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:12.206Z,1528898292.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:12.226Z,1528898292.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:12.609Z,1528898292.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:12.628Z,1528898292.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:13.008Z,1528898293.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:13.033Z,1528898293.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:13.409Z,1528898293.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:13.428Z,1528898293.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:13.814Z,1528898293.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:13.834Z,1528898293.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:14.221Z,1528898294.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:14.240Z,1528898294.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:14.616Z,1528898294.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:14.635Z,1528898294.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:15.007Z,1528898295.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:15.039Z,1528898295.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:15.407Z,1528898295.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:15.436Z,1528898295.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:15.807Z,1528898295.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:15.825Z,1528898295.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:16.208Z,1528898296.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:16.239Z,1528898296.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:16.615Z,1528898296.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:16.634Z,1528898296.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:17.015Z,1528898297.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:17.033Z,1528898297.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:17.415Z,1528898297.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:17.434Z,1528898297.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:17.808Z,1528898297.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:17.836Z,1528898297.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:18.211Z,1528898298.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:18.236Z,1528898298.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:18.610Z,1528898298.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:18.629Z,1528898298.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:19.007Z,1528898299.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:19.037Z,1528898299.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:19.411Z,1528898299.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:19.429Z,1528898299.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:19.815Z,1528898299.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:19.840Z,1528898299.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:20.221Z,1528898300.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:20.239Z,1528898300.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:20.616Z,1528898300.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:20.634Z,1528898300.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:21.007Z,1528898301.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:21.039Z,1528898301.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:21.413Z,1528898301.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:21.443Z,1528898301.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:21.807Z,1528898301.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:21.825Z,1528898301.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:22.207Z,1528898302.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:22.231Z,1528898302.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:22.618Z,1528898302.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:22.637Z,1528898302.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:23.019Z,1528898303.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:23.037Z,1528898303.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:23.419Z,1528898303.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:23.437Z,1528898303.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:23.807Z,1528898303.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:23.832Z,1528898303.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:24.207Z,1528898304.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:24.225Z,1528898304.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:24.610Z,1528898304.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:24.628Z,1528898304.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:25.007Z,1528898305.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:25.032Z,1528898305.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:25.406Z,1528898305.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:25.424Z,1528898305.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:25.819Z,1528898305.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:25.837Z,1528898305.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:26.225Z,1528898306.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:26.243Z,1528898306.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:26.619Z,1528898306.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:26.638Z,1528898306.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:27.007Z,1528898307.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:27.031Z,1528898307.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:27.407Z,1528898307.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:27.432Z,1528898307.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:27.807Z,1528898307.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:27.825Z,1528898307.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:28.207Z,1528898308.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:28.240Z,1528898308.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:28.618Z,1528898308.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:28.637Z,1528898308.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:29.020Z,1528898309.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:29.038Z,1528898309.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:29.418Z,1528898309.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:29.436Z,1528898309.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:29.807Z,1528898309.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:29.832Z,1528898309.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:30.211Z,1528898310.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:30.230Z,1528898310.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:30.607Z,1528898310.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:30.631Z,1528898310.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:31.011Z,1528898311.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:31.029Z,1528898311.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:31.406Z,1528898311.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:31.424Z,1528898311.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:31.819Z,1528898311.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:31.844Z,1528898311.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:32.219Z,1528898312.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:32.240Z,1528898312.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:32.620Z,1528898312.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:32.638Z,1528898312.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:33.007Z,1528898313.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:33.033Z,1528898313.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:33.407Z,1528898313.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:33.432Z,1528898313.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:33.800Z,1528898313.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:33.837Z,1528898313.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:34.214Z,1528898314.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:34.232Z,1528898314.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:34.622Z,1528898314.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:34.640Z,1528898314.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:35.024Z,1528898315.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:35.042Z,1528898315.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:35.418Z,1528898315.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:35.448Z,1528898315.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:35.804Z,1528898315.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:35.836Z,1528898315.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:36.200Z,1528898316.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:36.235Z,1528898316.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:36.604Z,1528898316.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:36.640Z,1528898316.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:37.004Z,1528898317.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:37.035Z,1528898317.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:37.403Z,1528898317.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:37.443Z,1528898317.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:37.814Z,1528898317.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:37.843Z,1528898317.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:38.225Z,1528898318.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:38.243Z,1528898318.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:38.614Z,1528898318.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:38.643Z,1528898318.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:39.003Z,1528898319.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:39.045Z,1528898319.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:39.403Z,1528898319.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:39.437Z,1528898319.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:39.804Z,1528898319.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:39.823Z,1528898319.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:40.208Z,1528898320.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:40.226Z,1528898320.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:40.617Z,1528898320.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:40.656Z,1528898320.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:41.017Z,1528898321.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:41.052Z,1528898321.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:41.422Z,1528898321.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:41.456Z,1528898321.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:41.808Z,1528898321.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:41.826Z,1528898321.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:42.209Z,1528898322.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:42.227Z,1528898322.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:42.608Z,1528898322.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:42.633Z,1528898322.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:43.008Z,1528898323.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:43.032Z,1528898323.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:43.406Z,1528898323.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:43.425Z,1528898323.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:43.814Z,1528898323.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:43.832Z,1528898323.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:44.214Z,1528898324.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:44.236Z,1528898324.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:44.618Z,1528898324.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:44.636Z,1528898324.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:45.010Z,1528898325.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:45.027Z,1528898325.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:45.409Z,1528898325.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:45.428Z,1528898325.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:45.807Z,1528898325.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:45.825Z,1528898325.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:46.210Z,1528898326.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:46.228Z,1528898326.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:46.617Z,1528898326.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:46.637Z,1528898326.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:47.014Z,1528898327.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:47.032Z,1528898327.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:47.426Z,1528898327.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:47.459Z,1528898327.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:47.810Z,1528898327.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:47.828Z,1528898327.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:48.208Z,1528898328.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:48.226Z,1528898328.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:48.612Z,1528898328.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:48.630Z,1528898328.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:49.005Z,1528898329.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:49.029Z,1528898329.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:49.408Z,1528898329.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:49.426Z,1528898329.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:49.818Z,1528898329.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:49.849Z,1528898329.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:50.222Z,1528898330.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:50.259Z,1528898330.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:50.623Z,1528898330.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:50.641Z,1528898330.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:51.007Z,1528898331.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:51.033Z,1528898331.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:51.399Z,1528898331.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:51.429Z,1528898331.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:51.800Z,1528898331.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:51.831Z,1528898331.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:52.214Z,1528898332.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:52.233Z,1528898332.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:52.618Z,1528898332.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:52.648Z,1528898332.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:53.021Z,1528898333.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:53.039Z,1528898333.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:53.418Z,1528898333.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:53.462Z,1528898333.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:53.800Z,1528898333.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:53.828Z,1528898333.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:54.204Z,1528898334.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:54.232Z,1528898334.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:54.623Z,1528898334.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:54.641Z,1528898334.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:55.023Z,1528898335.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:55.048Z,1528898335.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:55.421Z,1528898335.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:55.439Z,1528898335.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:55.803Z,1528898335.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:55.836Z,1528898335.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:56.199Z,1528898336.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:56.228Z,1528898336.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:56.621Z,1528898336.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:56.639Z,1528898336.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:57.024Z,1528898337.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:57.048Z,1528898337.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:57.418Z,1528898337.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:57.447Z,1528898337.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:57.800Z,1528898337.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:57.836Z,1528898337.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:58.204Z,1528898338.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:58.240Z,1528898338.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:58.616Z,1528898338.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:58.634Z,1528898338.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:59.021Z,1528898339.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:59.039Z,1528898339.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:59.418Z,1528898339.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:59.451Z,1528898339.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:58:59.804Z,1528898339.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:58:59.833Z,1528898339.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:00.199Z,1528898340.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:00.244Z,1528898340.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:00.624Z,1528898340.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:00.642Z,1528898340.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:01.021Z,1528898341.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:01.044Z,1528898341.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:01.421Z,1528898341.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:01.439Z,1528898341.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:01.808Z,1528898341.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:01.836Z,1528898341.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:02.207Z,1528898342.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:02.240Z,1528898342.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:05.331Z,1528898345.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:05.349Z,1528898345.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:05.352Z,1528898345.352 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T13:54:05.0Z
2018-06-13T13:59:05.352Z,1528898345.352 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T13:59:05.352Z,1528898345.352 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T13:59:05.493Z,1528898345.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:05.529Z,1528898345.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:06.741Z,1528898346.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:06.783Z,1528898346.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:06.890Z,1528898346.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:06.947Z,1528898346.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:07.295Z,1528898347.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:07.329Z,1528898347.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:07.695Z,1528898347.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:07.713Z,1528898347.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:10.802Z,1528898350.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:10.820Z,1528898350.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:10.937Z,1528898350.937 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0244.lzma
2018-06-13T13:59:10.967Z,1528898350.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:11.012Z,1528898351.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:11.382Z,1528898351.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:11.408Z,1528898351.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:11.739Z,1528898351.739 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0244.lzma.bak
2018-06-13T13:59:11.740Z,1528898351.740 [DataOverHttps](INFO): SBD MOMSN=8329339
2018-06-13T13:59:11.796Z,1528898351.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:11.815Z,1528898351.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:13.694Z,1528898353.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:13.711Z,1528898353.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:13.850Z,1528898353.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:13.869Z,1528898353.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:14.252Z,1528898354.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:14.291Z,1528898354.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:14.655Z,1528898354.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:14.673Z,1528898354.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:15.055Z,1528898355.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:15.073Z,1528898355.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:18.220Z,1528898358.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:18.250Z,1528898358.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:18.377Z,1528898358.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:18.428Z,1528898358.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:18.791Z,1528898358.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:18.808Z,1528898358.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:19.189Z,1528898359.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:19.206Z,1528898359.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:19.567Z,1528898359.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:19.605Z,1528898359.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:19.972Z,1528898359.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:20.006Z,1528898360.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:20.371Z,1528898360.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:20.388Z,1528898360.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:20.777Z,1528898360.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:20.811Z,1528898360.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:21.185Z,1528898361.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:21.220Z,1528898361.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:21.581Z,1528898361.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:21.616Z,1528898361.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:21.971Z,1528898361.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:22.005Z,1528898362.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:22.371Z,1528898362.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:22.388Z,1528898362.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:22.774Z,1528898362.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:22.792Z,1528898362.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:25.878Z,1528898365.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:25.912Z,1528898365.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:26.016Z,1528898366.016 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0245.lzma
2018-06-13T13:59:26.039Z,1528898366.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:26.088Z,1528898366.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:26.461Z,1528898366.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:26.569Z,1528898366.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:28.273Z,1528898368.273 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0245.lzma.bak
2018-06-13T13:59:28.273Z,1528898368.273 [DataOverHttps](INFO): SBD MOMSN=8329341
2018-06-13T13:59:28.314Z,1528898368.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:28.366Z,1528898368.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:30.100Z,1528898370.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:30.128Z,1528898370.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:30.131Z,1528898370.131 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T13:59:30.131Z,1528898370.131 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T13:59:30.131Z,1528898370.131 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T13:59:30.244Z,1528898370.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:30.275Z,1528898370.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:30.651Z,1528898370.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:30.684Z,1528898370.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:31.052Z,1528898371.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:31.083Z,1528898371.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:31.444Z,1528898371.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:31.471Z,1528898371.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:31.872Z,1528898371.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:31.890Z,1528898371.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:35.075Z,1528898375.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:35.094Z,1528898375.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:35.223Z,1528898375.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:35.256Z,1528898375.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:35.603Z,1528898375.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:35.640Z,1528898375.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:36.004Z,1528898376.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:36.041Z,1528898376.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:36.400Z,1528898376.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:36.434Z,1528898376.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:36.810Z,1528898376.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:36.838Z,1528898376.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:37.213Z,1528898377.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:37.248Z,1528898377.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:37.613Z,1528898377.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:37.648Z,1528898377.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:37.999Z,1528898377.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:38.040Z,1528898378.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:38.399Z,1528898378.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:38.444Z,1528898378.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:38.799Z,1528898378.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:38.838Z,1528898378.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:39.195Z,1528898379.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:39.213Z,1528898379.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:39.599Z,1528898379.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:39.616Z,1528898379.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:40.013Z,1528898380.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:40.047Z,1528898380.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:40.417Z,1528898380.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:40.444Z,1528898380.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:40.817Z,1528898380.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:40.847Z,1528898380.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:41.204Z,1528898381.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:41.241Z,1528898381.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:41.603Z,1528898381.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:41.620Z,1528898381.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:42.004Z,1528898382.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:42.021Z,1528898382.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:42.402Z,1528898382.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:42.420Z,1528898382.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:42.813Z,1528898382.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:42.848Z,1528898382.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:43.217Z,1528898383.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:43.258Z,1528898383.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:43.614Z,1528898383.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:43.632Z,1528898383.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:44.004Z,1528898384.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:44.022Z,1528898384.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:44.406Z,1528898384.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:44.424Z,1528898384.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:44.802Z,1528898384.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:44.820Z,1528898384.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:45.205Z,1528898385.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:45.228Z,1528898385.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:45.607Z,1528898385.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:45.626Z,1528898385.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:46.010Z,1528898386.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:46.028Z,1528898386.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:46.414Z,1528898386.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:46.431Z,1528898386.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:46.814Z,1528898386.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:46.836Z,1528898386.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:47.204Z,1528898387.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:47.228Z,1528898387.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:47.603Z,1528898387.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:47.628Z,1528898387.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:48.005Z,1528898388.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:48.028Z,1528898388.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:48.404Z,1528898388.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:48.423Z,1528898388.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:48.809Z,1528898388.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:48.828Z,1528898388.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:49.213Z,1528898389.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:49.232Z,1528898389.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:49.606Z,1528898389.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:49.629Z,1528898389.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:50.004Z,1528898390.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:50.021Z,1528898390.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:50.405Z,1528898390.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:50.424Z,1528898390.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:50.801Z,1528898390.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:50.819Z,1528898390.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:51.206Z,1528898391.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:51.224Z,1528898391.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:51.605Z,1528898391.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:51.623Z,1528898391.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:52.010Z,1528898392.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:52.028Z,1528898392.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:52.413Z,1528898392.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:52.431Z,1528898392.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:52.813Z,1528898392.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:52.831Z,1528898392.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:53.204Z,1528898393.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:53.225Z,1528898393.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:53.604Z,1528898393.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:53.621Z,1528898393.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:54.004Z,1528898394.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:54.038Z,1528898394.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:54.405Z,1528898394.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:54.423Z,1528898394.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:54.810Z,1528898394.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:54.828Z,1528898394.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:55.214Z,1528898395.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:55.232Z,1528898395.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:55.610Z,1528898395.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:55.632Z,1528898395.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:56.003Z,1528898396.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:56.037Z,1528898396.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:56.403Z,1528898396.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:56.428Z,1528898396.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:56.805Z,1528898396.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:56.823Z,1528898396.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:57.203Z,1528898397.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:57.226Z,1528898397.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:57.603Z,1528898397.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:57.627Z,1528898397.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:58.015Z,1528898398.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:58.033Z,1528898398.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:58.414Z,1528898398.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:58.436Z,1528898398.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:58.814Z,1528898398.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:58.836Z,1528898398.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:59.206Z,1528898399.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:59.324Z,1528898399.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T13:59:59.604Z,1528898399.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T13:59:59.622Z,1528898399.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:00.003Z,1528898400.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:00.037Z,1528898400.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:00.405Z,1528898400.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:00.428Z,1528898400.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:00.815Z,1528898400.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:00.833Z,1528898400.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:01.214Z,1528898401.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:01.240Z,1528898401.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:01.611Z,1528898401.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:01.629Z,1528898401.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:02.003Z,1528898402.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:02.026Z,1528898402.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:02.406Z,1528898402.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:02.424Z,1528898402.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:02.802Z,1528898402.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:02.824Z,1528898402.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:03.203Z,1528898403.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:03.226Z,1528898403.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:03.603Z,1528898403.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:03.628Z,1528898403.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:04.014Z,1528898404.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:04.032Z,1528898404.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:04.414Z,1528898404.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:04.436Z,1528898404.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:04.815Z,1528898404.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:04.845Z,1528898404.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:05.210Z,1528898405.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:05.229Z,1528898405.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:05.603Z,1528898405.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:05.626Z,1528898405.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:06.006Z,1528898406.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:06.025Z,1528898406.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:06.401Z,1528898406.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:06.463Z,1528898406.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:06.816Z,1528898406.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:06.834Z,1528898406.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:07.215Z,1528898407.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:07.233Z,1528898407.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:07.610Z,1528898407.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:07.632Z,1528898407.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:08.003Z,1528898408.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:08.026Z,1528898408.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:08.406Z,1528898408.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:08.428Z,1528898408.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:08.795Z,1528898408.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:08.832Z,1528898408.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:09.203Z,1528898409.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:09.233Z,1528898409.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:09.599Z,1528898409.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:09.640Z,1528898409.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:10.016Z,1528898410.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:10.034Z,1528898410.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:10.419Z,1528898410.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:10.436Z,1528898410.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:10.820Z,1528898410.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:10.838Z,1528898410.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:11.195Z,1528898411.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:11.236Z,1528898411.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:11.599Z,1528898411.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:11.722Z,1528898411.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:11.996Z,1528898411.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:12.041Z,1528898412.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:12.395Z,1528898412.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:12.503Z,1528898412.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:12.814Z,1528898412.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:12.876Z,1528898412.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:13.218Z,1528898413.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:13.244Z,1528898413.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:13.614Z,1528898413.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:13.633Z,1528898413.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:14.005Z,1528898414.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:14.023Z,1528898414.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:14.407Z,1528898414.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:14.426Z,1528898414.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:14.805Z,1528898414.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:14.828Z,1528898414.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:15.205Z,1528898415.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:15.224Z,1528898415.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:15.606Z,1528898415.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:15.624Z,1528898415.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:16.014Z,1528898416.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:16.032Z,1528898416.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:16.415Z,1528898416.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:16.434Z,1528898416.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:16.814Z,1528898416.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:16.836Z,1528898416.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:17.206Z,1528898417.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:17.312Z,1528898417.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:17.605Z,1528898417.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:17.622Z,1528898417.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:18.007Z,1528898418.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:18.025Z,1528898418.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:18.399Z,1528898418.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:18.423Z,1528898418.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:18.814Z,1528898418.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:18.836Z,1528898418.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:19.215Z,1528898419.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:19.233Z,1528898419.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:19.614Z,1528898419.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:19.632Z,1528898419.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:20.005Z,1528898420.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:20.022Z,1528898420.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:20.406Z,1528898420.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:20.424Z,1528898420.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:20.799Z,1528898420.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:20.823Z,1528898420.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:21.207Z,1528898421.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:21.225Z,1528898421.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:21.606Z,1528898421.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:21.624Z,1528898421.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:22.012Z,1528898422.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:22.030Z,1528898422.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:22.414Z,1528898422.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:22.436Z,1528898422.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:22.815Z,1528898422.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:22.833Z,1528898422.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:23.199Z,1528898423.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:23.232Z,1528898423.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:23.599Z,1528898423.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:23.623Z,1528898423.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:24.008Z,1528898424.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:24.026Z,1528898424.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:24.406Z,1528898424.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:24.424Z,1528898424.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:24.814Z,1528898424.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:24.832Z,1528898424.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:25.214Z,1528898425.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:25.253Z,1528898425.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:25.613Z,1528898425.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:25.631Z,1528898425.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:26.006Z,1528898426.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:26.024Z,1528898426.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:26.404Z,1528898426.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:26.432Z,1528898426.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:26.805Z,1528898426.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:26.823Z,1528898426.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:27.203Z,1528898427.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:27.233Z,1528898427.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:27.599Z,1528898427.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:27.628Z,1528898427.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:28.016Z,1528898428.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:28.035Z,1528898428.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:28.419Z,1528898428.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:28.438Z,1528898428.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:28.820Z,1528898428.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:28.839Z,1528898428.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:29.199Z,1528898429.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:29.226Z,1528898429.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:29.599Z,1528898429.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:29.626Z,1528898429.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:29.000Z,1528898430.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:30.036Z,1528898430.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:30.399Z,1528898430.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:30.426Z,1528898430.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:30.819Z,1528898430.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:30.837Z,1528898430.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:33.925Z,1528898433.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:33.943Z,1528898433.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:34.078Z,1528898434.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:34.120Z,1528898434.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:34.474Z,1528898434.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:34.492Z,1528898434.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:34.874Z,1528898434.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:34.892Z,1528898434.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:35.270Z,1528898435.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:35.287Z,1528898435.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:35.672Z,1528898435.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:35.690Z,1528898435.690 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:35.690Z,1528898435.690 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 211
2018-06-13T14:00:35.690Z,1528898435.690 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:00:35.692Z,1528898435.692 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:35.692Z,1528898435.692 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 211
2018-06-13T14:00:35.692Z,1528898435.692 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:00:35.694Z,1528898435.694 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:35.694Z,1528898435.694 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 211
2018-06-13T14:00:35.694Z,1528898435.694 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:00:35.773Z,1528898435.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:00:35.773Z,1528898435.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:00:35.774Z,1528898435.774 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:00:36.089Z,1528898436.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:36.198Z,1528898436.198 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:00:36.198Z,1528898436.198 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 211
2018-06-13T14:00:36.198Z,1528898436.198 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:00:36.198Z,1528898436.198 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 211
2018-06-13T14:00:36.199Z,1528898436.199 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:00:36.199Z,1528898436.199 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 211
2018-06-13T14:00:36.483Z,1528898436.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:36.500Z,1528898436.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:00:36.500Z,1528898436.500 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:00:36.500Z,1528898436.500 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:00:36.501Z,1528898436.501 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:00:36.501Z,1528898436.501 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:00:36.502Z,1528898436.502 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:00:36.502Z,1528898436.502 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:00:36.502Z,1528898436.502 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:00:36.503Z,1528898436.503 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:00:36.876Z,1528898436.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:36.902Z,1528898436.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:00:36.903Z,1528898436.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:37.274Z,1528898437.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:37.296Z,1528898437.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:00:37.297Z,1528898437.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:37.663Z,1528898437.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:37.690Z,1528898437.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:00:37.691Z,1528898437.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:38.071Z,1528898438.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:38.095Z,1528898438.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:00:38.096Z,1528898438.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:38.471Z,1528898438.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:38.495Z,1528898438.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:00:38.496Z,1528898438.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:38.883Z,1528898438.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:38.901Z,1528898438.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:00:38.902Z,1528898438.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:39.286Z,1528898439.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:39.303Z,1528898439.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:00:39.304Z,1528898439.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:39.686Z,1528898439.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:39.704Z,1528898439.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:00:39.705Z,1528898439.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:40.063Z,1528898440.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:40.100Z,1528898440.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:00:40.101Z,1528898440.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:40.471Z,1528898440.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:40.493Z,1528898440.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:00:40.494Z,1528898440.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:40.875Z,1528898440.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:40.893Z,1528898440.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:00:40.894Z,1528898440.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:41.274Z,1528898441.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:41.296Z,1528898441.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:00:41.297Z,1528898441.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:41.671Z,1528898441.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:41.694Z,1528898441.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:00:41.694Z,1528898441.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:42.086Z,1528898442.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:42.104Z,1528898442.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:00:42.105Z,1528898442.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:42.482Z,1528898442.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:42.503Z,1528898442.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:00:42.504Z,1528898442.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:42.882Z,1528898442.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:42.913Z,1528898442.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:00:42.914Z,1528898442.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:43.268Z,1528898443.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:43.299Z,1528898443.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:00:43.300Z,1528898443.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:43.667Z,1528898443.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:43.694Z,1528898443.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:00:43.695Z,1528898443.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:44.068Z,1528898444.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:44.108Z,1528898444.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:00:44.109Z,1528898444.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:44.467Z,1528898444.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:44.507Z,1528898444.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:00:44.508Z,1528898444.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:44.878Z,1528898444.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:44.910Z,1528898444.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:00:44.911Z,1528898444.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:45.287Z,1528898445.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:45.304Z,1528898445.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:00:45.305Z,1528898445.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:45.687Z,1528898445.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:45.712Z,1528898445.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:00:45.713Z,1528898445.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:46.067Z,1528898446.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:46.094Z,1528898446.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:00:46.095Z,1528898446.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:46.467Z,1528898446.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:46.500Z,1528898446.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:00:46.501Z,1528898446.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:46.867Z,1528898446.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:46.896Z,1528898446.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:00:46.898Z,1528898446.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:47.264Z,1528898447.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:47.299Z,1528898447.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:00:47.300Z,1528898447.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:47.667Z,1528898447.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:47.703Z,1528898447.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:00:47.704Z,1528898447.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:48.087Z,1528898448.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:48.105Z,1528898448.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:00:48.106Z,1528898448.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:48.487Z,1528898448.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:48.505Z,1528898448.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:00:48.506Z,1528898448.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:48.883Z,1528898448.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:48.900Z,1528898448.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:00:48.902Z,1528898448.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:49.267Z,1528898449.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:49.297Z,1528898449.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:00:49.298Z,1528898449.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:49.663Z,1528898449.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:49.699Z,1528898449.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:00:49.700Z,1528898449.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:50.068Z,1528898450.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:50.103Z,1528898450.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:00:50.104Z,1528898450.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:50.468Z,1528898450.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:50.508Z,1528898450.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:00:50.513Z,1528898450.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:50.884Z,1528898450.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:50.901Z,1528898450.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:00:50.902Z,1528898450.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:51.287Z,1528898451.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:51.304Z,1528898451.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:00:51.305Z,1528898451.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:51.688Z,1528898451.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:51.706Z,1528898451.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:00:51.706Z,1528898451.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:52.063Z,1528898452.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:52.096Z,1528898452.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:00:52.101Z,1528898452.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:52.468Z,1528898452.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:52.507Z,1528898452.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:00:52.508Z,1528898452.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:52.867Z,1528898452.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:52.901Z,1528898452.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:00:52.902Z,1528898452.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:53.264Z,1528898453.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:53.282Z,1528898453.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:00:53.283Z,1528898453.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:53.667Z,1528898453.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:53.684Z,1528898453.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:00:53.685Z,1528898453.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:54.081Z,1528898454.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:54.119Z,1528898454.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:00:54.120Z,1528898454.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:54.482Z,1528898454.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:54.519Z,1528898454.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:00:54.520Z,1528898454.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:54.881Z,1528898454.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:54.899Z,1528898454.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:00:54.900Z,1528898454.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:55.274Z,1528898455.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:55.292Z,1528898455.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:00:55.293Z,1528898455.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:55.672Z,1528898455.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:55.690Z,1528898455.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:56.072Z,1528898456.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:56.097Z,1528898456.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:56.474Z,1528898456.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:56.492Z,1528898456.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:56.875Z,1528898456.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:56.893Z,1528898456.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:57.289Z,1528898457.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:57.323Z,1528898457.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:57.681Z,1528898457.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:57.700Z,1528898457.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:58.074Z,1528898458.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:58.092Z,1528898458.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:58.471Z,1528898458.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:58.502Z,1528898458.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:58.874Z,1528898458.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:58.900Z,1528898458.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:59.267Z,1528898459.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:59.293Z,1528898459.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:00:59.671Z,1528898459.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:00:59.695Z,1528898459.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:00.083Z,1528898460.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:00.101Z,1528898460.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:00.482Z,1528898460.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:00.500Z,1528898460.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:00.882Z,1528898460.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:00.900Z,1528898460.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:01.274Z,1528898461.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:01.293Z,1528898461.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:01.667Z,1528898461.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:01.691Z,1528898461.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:02.074Z,1528898462.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:02.096Z,1528898462.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:02.471Z,1528898462.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:02.496Z,1528898462.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:02.883Z,1528898462.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:02.900Z,1528898462.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:03.282Z,1528898463.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:03.304Z,1528898463.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:03.683Z,1528898463.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:03.708Z,1528898463.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:04.067Z,1528898464.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:04.098Z,1528898464.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:04.472Z,1528898464.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:04.491Z,1528898464.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:04.874Z,1528898464.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:04.892Z,1528898464.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:05.274Z,1528898465.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:05.296Z,1528898465.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:05.681Z,1528898465.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:05.699Z,1528898465.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:06.088Z,1528898466.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:06.107Z,1528898466.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:06.483Z,1528898466.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:06.501Z,1528898466.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:06.888Z,1528898466.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:06.912Z,1528898466.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:07.274Z,1528898467.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:07.297Z,1528898467.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:07.663Z,1528898467.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:07.700Z,1528898467.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:08.079Z,1528898468.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:08.096Z,1528898468.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:08.471Z,1528898468.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:08.497Z,1528898468.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:08.879Z,1528898468.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:08.913Z,1528898468.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:09.282Z,1528898469.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:09.304Z,1528898469.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:09.682Z,1528898469.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:09.708Z,1528898469.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:10.063Z,1528898470.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:10.104Z,1528898470.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:10.467Z,1528898470.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:10.504Z,1528898470.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:10.867Z,1528898470.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:10.902Z,1528898470.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:11.264Z,1528898471.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:11.300Z,1528898471.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:11.667Z,1528898471.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:11.711Z,1528898471.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:12.077Z,1528898472.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:12.107Z,1528898472.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:12.477Z,1528898472.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:12.514Z,1528898472.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:12.877Z,1528898472.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:12.917Z,1528898472.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:13.267Z,1528898473.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:13.285Z,1528898473.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:13.668Z,1528898473.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:13.686Z,1528898473.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:14.068Z,1528898474.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:14.085Z,1528898474.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:14.467Z,1528898474.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:14.484Z,1528898474.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:14.877Z,1528898474.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:14.911Z,1528898474.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:15.281Z,1528898475.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:15.315Z,1528898475.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:15.682Z,1528898475.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:15.699Z,1528898475.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:16.072Z,1528898476.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:16.090Z,1528898476.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:16.473Z,1528898476.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:16.491Z,1528898476.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:16.869Z,1528898476.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:16.887Z,1528898476.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:17.273Z,1528898477.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:17.291Z,1528898477.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:17.673Z,1528898477.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:17.691Z,1528898477.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:18.077Z,1528898478.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:18.095Z,1528898478.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:18.477Z,1528898478.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:18.495Z,1528898478.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:18.878Z,1528898478.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:18.895Z,1528898478.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:19.270Z,1528898479.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:19.288Z,1528898479.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:19.667Z,1528898479.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:19.690Z,1528898479.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:20.071Z,1528898480.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:20.089Z,1528898480.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:20.474Z,1528898480.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:20.491Z,1528898480.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:20.874Z,1528898480.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:20.896Z,1528898480.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:21.281Z,1528898481.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:21.299Z,1528898481.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:21.677Z,1528898481.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:21.700Z,1528898481.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:22.069Z,1528898482.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:22.087Z,1528898482.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:22.473Z,1528898482.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:22.491Z,1528898482.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:22.873Z,1528898482.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:22.891Z,1528898482.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:23.272Z,1528898483.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:23.298Z,1528898483.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:23.672Z,1528898483.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:23.696Z,1528898483.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:24.077Z,1528898484.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:24.100Z,1528898484.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:24.481Z,1528898484.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:24.499Z,1528898484.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:24.878Z,1528898484.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:24.895Z,1528898484.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:25.273Z,1528898485.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:25.291Z,1528898485.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:25.672Z,1528898485.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:25.690Z,1528898485.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:26.072Z,1528898486.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:26.098Z,1528898486.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:26.470Z,1528898486.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:26.487Z,1528898486.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:26.878Z,1528898486.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:26.896Z,1528898486.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:27.282Z,1528898487.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:27.300Z,1528898487.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:27.677Z,1528898487.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:27.696Z,1528898487.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:28.075Z,1528898488.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:28.093Z,1528898488.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:28.473Z,1528898488.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:28.491Z,1528898488.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:28.869Z,1528898488.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:28.887Z,1528898488.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:29.273Z,1528898489.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:29.291Z,1528898489.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:29.673Z,1528898489.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:29.690Z,1528898489.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:30.082Z,1528898490.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:30.099Z,1528898490.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:30.485Z,1528898490.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:30.503Z,1528898490.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:30.885Z,1528898490.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:30.903Z,1528898490.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:33.982Z,1528898493.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:34.001Z,1528898494.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:34.136Z,1528898494.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:34.179Z,1528898494.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:34.545Z,1528898494.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:34.579Z,1528898494.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:34.953Z,1528898494.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:34.988Z,1528898494.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:35.345Z,1528898495.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:35.381Z,1528898495.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:35.735Z,1528898495.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:35.776Z,1528898495.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:36.135Z,1528898496.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:36.152Z,1528898496.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:36.534Z,1528898496.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:36.552Z,1528898496.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:36.945Z,1528898496.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:36.979Z,1528898496.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:37.345Z,1528898497.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:37.362Z,1528898497.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:37.745Z,1528898497.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:37.763Z,1528898497.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:38.134Z,1528898498.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:38.160Z,1528898498.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:38.537Z,1528898498.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:38.555Z,1528898498.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:38.936Z,1528898498.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:38.954Z,1528898498.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:39.336Z,1528898499.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:39.354Z,1528898499.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:39.736Z,1528898499.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:39.754Z,1528898499.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:40.142Z,1528898500.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:40.161Z,1528898500.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:40.545Z,1528898500.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:40.563Z,1528898500.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:40.941Z,1528898500.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:40.964Z,1528898500.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:41.336Z,1528898501.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:41.354Z,1528898501.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:41.736Z,1528898501.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:41.754Z,1528898501.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:42.136Z,1528898502.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:42.162Z,1528898502.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:42.537Z,1528898502.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:42.560Z,1528898502.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:42.948Z,1528898502.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:42.972Z,1528898502.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:43.351Z,1528898503.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:43.369Z,1528898503.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:43.751Z,1528898503.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:43.769Z,1528898503.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:44.135Z,1528898504.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:44.169Z,1528898504.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:44.527Z,1528898504.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:44.565Z,1528898504.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:44.931Z,1528898504.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:44.960Z,1528898504.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:45.332Z,1528898505.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:45.367Z,1528898505.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:45.732Z,1528898505.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:45.768Z,1528898505.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:46.148Z,1528898506.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:46.167Z,1528898506.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:46.552Z,1528898506.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:46.576Z,1528898506.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:46.953Z,1528898506.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:46.971Z,1528898506.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:47.327Z,1528898507.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:47.364Z,1528898507.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:47.731Z,1528898507.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:47.768Z,1528898507.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:48.132Z,1528898508.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:48.165Z,1528898508.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:48.531Z,1528898508.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:48.566Z,1528898508.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:48.941Z,1528898508.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:48.969Z,1528898508.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:49.342Z,1528898509.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:49.370Z,1528898509.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:49.742Z,1528898509.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:49.776Z,1528898509.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:50.131Z,1528898510.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:50.168Z,1528898510.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:50.532Z,1528898510.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:50.573Z,1528898510.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:50.931Z,1528898510.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:50.969Z,1528898510.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:51.331Z,1528898511.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:51.349Z,1528898511.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:51.731Z,1528898511.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:51.749Z,1528898511.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:52.145Z,1528898512.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:52.179Z,1528898512.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:52.546Z,1528898512.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:52.576Z,1528898512.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:52.945Z,1528898512.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:52.982Z,1528898512.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:53.329Z,1528898513.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:53.352Z,1528898513.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:53.734Z,1528898513.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:53.756Z,1528898513.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:54.135Z,1528898514.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:54.160Z,1528898514.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:54.532Z,1528898514.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:54.551Z,1528898514.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:54.946Z,1528898514.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:54.964Z,1528898514.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:55.346Z,1528898515.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:55.368Z,1528898515.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:55.738Z,1528898515.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:55.764Z,1528898515.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:56.134Z,1528898516.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:56.153Z,1528898516.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:56.537Z,1528898516.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:56.556Z,1528898516.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:56.930Z,1528898516.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:56.960Z,1528898516.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:57.336Z,1528898517.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:57.368Z,1528898517.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:57.736Z,1528898517.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:57.755Z,1528898517.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:58.142Z,1528898518.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:58.160Z,1528898518.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:58.545Z,1528898518.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:58.563Z,1528898518.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:58.945Z,1528898518.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:58.963Z,1528898518.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:59.333Z,1528898519.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:59.356Z,1528898519.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:01:59.736Z,1528898519.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:01:59.760Z,1528898519.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:00.138Z,1528898520.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:00.156Z,1528898520.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:00.533Z,1528898520.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:00.551Z,1528898520.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:00.941Z,1528898520.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:00.959Z,1528898520.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:01.345Z,1528898521.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:01.364Z,1528898521.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:01.743Z,1528898521.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:01.761Z,1528898521.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:02.138Z,1528898522.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:02.156Z,1528898522.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:02.538Z,1528898522.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:02.556Z,1528898522.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:02.930Z,1528898522.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:02.963Z,1528898522.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:03.335Z,1528898523.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:03.358Z,1528898523.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:03.735Z,1528898523.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:03.760Z,1528898523.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:04.147Z,1528898524.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:04.172Z,1528898524.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:04.546Z,1528898524.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:04.568Z,1528898524.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:04.947Z,1528898524.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:04.965Z,1528898524.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:05.337Z,1528898525.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:05.355Z,1528898525.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:05.735Z,1528898525.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:05.757Z,1528898525.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:06.138Z,1528898526.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:06.157Z,1528898526.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:06.537Z,1528898526.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:06.555Z,1528898526.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:06.945Z,1528898526.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:06.963Z,1528898526.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:07.351Z,1528898527.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:07.369Z,1528898527.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:07.747Z,1528898527.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:07.764Z,1528898527.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:08.136Z,1528898528.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:08.155Z,1528898528.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:08.537Z,1528898528.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:08.560Z,1528898528.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:08.927Z,1528898528.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:08.965Z,1528898528.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:09.332Z,1528898529.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:09.372Z,1528898529.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:09.731Z,1528898529.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:09.769Z,1528898529.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:10.148Z,1528898530.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:10.166Z,1528898530.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:10.551Z,1528898530.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:10.569Z,1528898530.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:10.952Z,1528898530.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:10.972Z,1528898530.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:11.327Z,1528898531.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:11.360Z,1528898531.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:11.732Z,1528898531.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:11.766Z,1528898531.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:12.132Z,1528898532.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:12.166Z,1528898532.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:12.531Z,1528898532.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:12.548Z,1528898532.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:12.945Z,1528898532.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:12.971Z,1528898532.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:13.345Z,1528898533.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:13.379Z,1528898533.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:13.746Z,1528898533.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:13.788Z,1528898533.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:14.134Z,1528898534.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:14.152Z,1528898534.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:14.537Z,1528898534.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:14.555Z,1528898534.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:14.936Z,1528898534.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:14.960Z,1528898534.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:15.336Z,1528898535.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:15.356Z,1528898535.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:15.736Z,1528898535.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:15.755Z,1528898535.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:16.138Z,1528898536.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:16.160Z,1528898536.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:16.545Z,1528898536.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:16.563Z,1528898536.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:16.945Z,1528898536.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:16.963Z,1528898536.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:17.337Z,1528898537.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:17.355Z,1528898537.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:17.737Z,1528898537.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:17.755Z,1528898537.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:18.135Z,1528898538.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:18.170Z,1528898538.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:18.531Z,1528898538.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:18.556Z,1528898538.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:18.947Z,1528898538.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:18.965Z,1528898538.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:19.351Z,1528898539.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:19.369Z,1528898539.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:19.742Z,1528898539.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:19.764Z,1528898539.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:20.135Z,1528898540.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:20.169Z,1528898540.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:20.531Z,1528898540.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:20.561Z,1528898540.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:20.947Z,1528898540.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:20.965Z,1528898540.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:21.351Z,1528898541.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:21.369Z,1528898541.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:21.751Z,1528898541.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:21.768Z,1528898541.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:22.127Z,1528898542.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:22.154Z,1528898542.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:22.531Z,1528898542.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:22.559Z,1528898542.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:22.931Z,1528898542.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:22.969Z,1528898542.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:23.329Z,1528898543.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:23.364Z,1528898543.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:23.731Z,1528898543.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:23.766Z,1528898543.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:24.153Z,1528898544.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:24.171Z,1528898544.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:24.541Z,1528898544.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:24.559Z,1528898544.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:24.945Z,1528898544.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:24.963Z,1528898544.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:25.338Z,1528898545.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:25.356Z,1528898545.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:25.731Z,1528898545.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:25.767Z,1528898545.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:26.136Z,1528898546.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:26.155Z,1528898546.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:26.537Z,1528898546.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:26.560Z,1528898546.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:26.942Z,1528898546.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:26.960Z,1528898546.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:27.346Z,1528898547.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:27.392Z,1528898547.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:27.745Z,1528898547.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:27.764Z,1528898547.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:28.137Z,1528898548.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:28.155Z,1528898548.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:28.536Z,1528898548.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:28.554Z,1528898548.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:28.945Z,1528898548.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:28.989Z,1528898548.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:29.345Z,1528898549.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:29.364Z,1528898549.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:29.742Z,1528898549.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:29.764Z,1528898549.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:30.136Z,1528898550.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:30.167Z,1528898550.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:30.531Z,1528898550.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:30.581Z,1528898550.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:30.949Z,1528898550.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:30.976Z,1528898550.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:34.063Z,1528898554.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:34.086Z,1528898554.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:34.214Z,1528898554.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:34.237Z,1528898554.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:34.595Z,1528898554.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:34.632Z,1528898554.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:34.995Z,1528898554.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:35.036Z,1528898555.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:35.388Z,1528898555.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:35.422Z,1528898555.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:35.791Z,1528898555.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:35.825Z,1528898555.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:36.179Z,1528898556.179 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T14:02:36.179Z,1528898556.179 [NAL9602] Data Fault, FailCount= 3
2018-06-13T14:02:36.179Z,1528898556.179 [NAL9602](ERROR): Data Fault
2018-06-13T14:02:36.196Z,1528898556.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:36.266Z,1528898556.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:36.349Z,1528898556.349 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T14:02:36.572Z,1528898556.572 [NAL9602](INFO): Powering down
2018-06-13T14:02:36.590Z,1528898556.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:36.609Z,1528898556.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:36.995Z,1528898556.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:37.020Z,1528898557.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:37.394Z,1528898557.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:37.412Z,1528898557.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:37.493Z,1528898557.493 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T14:02:37.493Z,1528898557.493 [NAL9602] No Fault, FailCount= 3
2018-06-13T14:02:37.792Z,1528898557.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:37.811Z,1528898557.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:38.195Z,1528898558.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:38.214Z,1528898558.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:38.598Z,1528898558.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:38.615Z,1528898558.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:38.995Z,1528898558.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:39.013Z,1528898559.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:39.398Z,1528898559.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:39.420Z,1528898559.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:39.797Z,1528898559.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:39.815Z,1528898559.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:40.198Z,1528898560.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:40.217Z,1528898560.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:40.598Z,1528898560.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:40.616Z,1528898560.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:40.996Z,1528898560.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:41.015Z,1528898561.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:41.392Z,1528898561.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:41.412Z,1528898561.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:41.795Z,1528898561.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:41.836Z,1528898561.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:42.196Z,1528898562.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:42.215Z,1528898562.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:42.592Z,1528898562.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:42.611Z,1528898562.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:42.998Z,1528898562.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:43.016Z,1528898563.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:43.392Z,1528898563.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:43.416Z,1528898563.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:43.792Z,1528898563.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:43.811Z,1528898563.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:44.195Z,1528898564.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:44.216Z,1528898564.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:44.596Z,1528898564.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:44.614Z,1528898564.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:44.992Z,1528898564.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:45.011Z,1528898565.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:45.395Z,1528898565.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:45.414Z,1528898565.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:45.796Z,1528898565.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:45.814Z,1528898565.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:46.195Z,1528898566.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:46.214Z,1528898566.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:46.595Z,1528898566.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:46.616Z,1528898566.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:46.992Z,1528898566.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:47.010Z,1528898567.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:47.392Z,1528898567.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:47.411Z,1528898567.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:47.799Z,1528898567.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:47.816Z,1528898567.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:48.192Z,1528898568.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:48.210Z,1528898568.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:48.592Z,1528898568.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:48.610Z,1528898568.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:48.995Z,1528898568.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:49.016Z,1528898569.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:49.395Z,1528898569.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:49.413Z,1528898569.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:49.793Z,1528898569.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:49.811Z,1528898569.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:50.195Z,1528898570.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:50.216Z,1528898570.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:50.597Z,1528898570.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:50.615Z,1528898570.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:50.992Z,1528898570.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:51.011Z,1528898571.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:51.397Z,1528898571.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:51.415Z,1528898571.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:51.796Z,1528898571.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:51.815Z,1528898571.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:52.196Z,1528898572.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:52.215Z,1528898572.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:52.595Z,1528898572.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:52.628Z,1528898572.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:52.992Z,1528898572.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:53.010Z,1528898573.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:53.392Z,1528898573.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:53.411Z,1528898573.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:53.796Z,1528898573.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:53.815Z,1528898573.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:54.196Z,1528898574.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:54.215Z,1528898574.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:54.593Z,1528898574.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:54.612Z,1528898574.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:54.995Z,1528898574.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:55.018Z,1528898575.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:55.392Z,1528898575.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:55.410Z,1528898575.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:55.793Z,1528898575.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:55.812Z,1528898575.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:56.195Z,1528898576.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:56.220Z,1528898576.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:56.596Z,1528898576.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:56.615Z,1528898576.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:56.986Z,1528898576.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:57.025Z,1528898577.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:57.391Z,1528898577.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:57.419Z,1528898577.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:57.786Z,1528898577.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:57.820Z,1528898577.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:58.186Z,1528898578.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:58.224Z,1528898578.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:58.591Z,1528898578.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:58.619Z,1528898578.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:58.990Z,1528898578.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:59.019Z,1528898579.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:59.387Z,1528898579.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:59.425Z,1528898579.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:02:59.791Z,1528898579.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:02:59.833Z,1528898579.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:00.191Z,1528898580.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:00.228Z,1528898580.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:00.586Z,1528898580.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:00.621Z,1528898580.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:00.991Z,1528898580.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:01.029Z,1528898581.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:01.392Z,1528898581.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:01.428Z,1528898581.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:01.786Z,1528898581.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:01.817Z,1528898581.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:02.191Z,1528898582.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:02.229Z,1528898582.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:02.591Z,1528898582.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:02.609Z,1528898582.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:02.988Z,1528898582.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:03.006Z,1528898583.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:03.394Z,1528898583.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:03.413Z,1528898583.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:03.794Z,1528898583.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:03.813Z,1528898583.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:04.194Z,1528898584.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:04.213Z,1528898584.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:04.594Z,1528898584.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:04.613Z,1528898584.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:04.994Z,1528898584.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:05.013Z,1528898585.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:05.390Z,1528898585.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:05.408Z,1528898585.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:05.794Z,1528898585.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:05.812Z,1528898585.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:06.195Z,1528898586.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:06.241Z,1528898586.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:06.590Z,1528898586.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:06.608Z,1528898586.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:06.978Z,1528898586.978 [NAL9602](INFO): Powering up NAL9602
2018-06-13T14:03:06.995Z,1528898586.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:07.014Z,1528898587.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:07.394Z,1528898587.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:07.413Z,1528898587.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:07.794Z,1528898587.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:07.812Z,1528898587.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:08.199Z,1528898588.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:08.218Z,1528898588.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:08.595Z,1528898588.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:08.620Z,1528898588.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:08.994Z,1528898588.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:09.012Z,1528898589.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:09.394Z,1528898589.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:09.413Z,1528898589.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:09.794Z,1528898589.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:09.820Z,1528898589.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:10.198Z,1528898590.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:10.217Z,1528898590.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:10.590Z,1528898590.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:10.633Z,1528898590.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:10.995Z,1528898590.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:11.023Z,1528898591.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:11.396Z,1528898591.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:11.416Z,1528898591.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:11.795Z,1528898591.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:11.822Z,1528898591.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:12.196Z,1528898592.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:12.216Z,1528898592.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:12.590Z,1528898592.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:12.619Z,1528898592.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:12.992Z,1528898592.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:13.021Z,1528898593.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:13.391Z,1528898593.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:13.420Z,1528898593.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:13.790Z,1528898593.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:13.819Z,1528898593.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:14.191Z,1528898594.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:14.220Z,1528898594.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:14.587Z,1528898594.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:14.616Z,1528898594.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:14.990Z,1528898594.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:15.020Z,1528898595.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:15.391Z,1528898595.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:15.420Z,1528898595.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:15.791Z,1528898595.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:15.821Z,1528898595.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:16.186Z,1528898596.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:16.215Z,1528898596.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:16.604Z,1528898596.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:16.628Z,1528898596.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:16.991Z,1528898596.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:17.021Z,1528898597.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:17.387Z,1528898597.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:17.416Z,1528898597.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:17.813Z,1528898597.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:17.831Z,1528898597.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:18.174Z,1528898598.174 [NAL9602](INFO): NAL9602 initialized
2018-06-13T14:03:18.192Z,1528898598.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:18.234Z,1528898598.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:18.587Z,1528898598.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:18.626Z,1528898598.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:19.010Z,1528898599.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:19.028Z,1528898599.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:19.408Z,1528898599.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:19.427Z,1528898599.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:19.811Z,1528898599.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:19.829Z,1528898599.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:20.191Z,1528898600.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:20.222Z,1528898600.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:20.591Z,1528898600.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:20.621Z,1528898600.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:20.988Z,1528898600.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:21.022Z,1528898601.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:21.392Z,1528898601.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:21.421Z,1528898601.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:21.804Z,1528898601.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:21.823Z,1528898601.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:22.209Z,1528898602.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:22.227Z,1528898602.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:22.608Z,1528898602.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:22.626Z,1528898602.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:22.991Z,1528898602.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:23.019Z,1528898603.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:23.391Z,1528898603.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:23.420Z,1528898603.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:23.791Z,1528898603.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:23.819Z,1528898603.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:24.187Z,1528898604.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:24.237Z,1528898604.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:24.588Z,1528898604.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:24.625Z,1528898604.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:25.012Z,1528898605.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:25.036Z,1528898605.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:25.412Z,1528898605.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:25.436Z,1528898605.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:25.809Z,1528898605.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:25.827Z,1528898605.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:26.191Z,1528898606.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:26.219Z,1528898606.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:26.590Z,1528898606.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:26.620Z,1528898606.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:26.991Z,1528898606.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:27.020Z,1528898607.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:27.391Z,1528898607.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:27.419Z,1528898607.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:27.808Z,1528898607.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:27.825Z,1528898607.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:28.209Z,1528898608.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:28.227Z,1528898608.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:28.612Z,1528898608.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:28.630Z,1528898608.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:28.987Z,1528898608.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:29.015Z,1528898609.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:29.388Z,1528898609.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:29.430Z,1528898609.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:29.791Z,1528898609.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:29.833Z,1528898609.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:30.195Z,1528898610.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:30.223Z,1528898610.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:30.591Z,1528898610.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:30.625Z,1528898610.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:31.017Z,1528898611.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:31.035Z,1528898611.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:34.122Z,1528898614.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:34.147Z,1528898614.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:34.293Z,1528898614.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:34.337Z,1528898614.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:34.688Z,1528898614.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:34.725Z,1528898614.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:35.088Z,1528898615.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:35.129Z,1528898615.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:35.479Z,1528898615.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:35.497Z,1528898615.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:35.893Z,1528898615.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:35.931Z,1528898615.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:36.293Z,1528898616.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:36.328Z,1528898616.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:36.694Z,1528898616.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:36.727Z,1528898616.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:36.727Z,1528898616.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 212
2018-06-13T14:03:36.728Z,1528898616.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:03:36.729Z,1528898616.729 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:36.730Z,1528898616.730 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 212
2018-06-13T14:03:36.730Z,1528898616.730 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:03:36.731Z,1528898616.731 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:36.731Z,1528898616.731 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 212
2018-06-13T14:03:36.731Z,1528898616.731 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:03:36.813Z,1528898616.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:03:36.813Z,1528898616.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:03:36.814Z,1528898616.814 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:03:37.090Z,1528898617.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:37.205Z,1528898617.205 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:03:37.205Z,1528898617.205 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 212
2018-06-13T14:03:37.206Z,1528898617.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:03:37.206Z,1528898617.206 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 212
2018-06-13T14:03:37.206Z,1528898617.206 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:03:37.206Z,1528898617.206 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 212
2018-06-13T14:03:37.486Z,1528898617.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:37.528Z,1528898617.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:03:37.528Z,1528898617.528 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:03:37.529Z,1528898617.529 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:03:37.529Z,1528898617.529 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:03:37.530Z,1528898617.530 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:03:37.530Z,1528898617.530 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:03:37.530Z,1528898617.530 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:03:37.531Z,1528898617.531 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:03:37.531Z,1528898617.531 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:03:37.887Z,1528898617.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:37.904Z,1528898617.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:03:37.905Z,1528898617.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:38.287Z,1528898618.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:38.304Z,1528898618.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:03:38.305Z,1528898618.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:38.693Z,1528898618.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:38.711Z,1528898618.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:03:38.712Z,1528898618.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:39.094Z,1528898619.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:39.111Z,1528898619.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:03:39.112Z,1528898619.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:39.497Z,1528898619.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:39.515Z,1528898619.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:03:39.516Z,1528898619.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:39.889Z,1528898619.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:39.906Z,1528898619.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:03:39.907Z,1528898619.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:40.283Z,1528898620.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:40.311Z,1528898620.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:03:40.312Z,1528898620.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:40.694Z,1528898620.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:40.711Z,1528898620.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:03:40.712Z,1528898620.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:41.093Z,1528898621.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:41.110Z,1528898621.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:03:41.111Z,1528898621.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:41.494Z,1528898621.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:41.516Z,1528898621.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:03:41.517Z,1528898621.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:41.888Z,1528898621.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:41.906Z,1528898621.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:03:41.907Z,1528898621.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:42.289Z,1528898622.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:42.306Z,1528898622.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:03:42.307Z,1528898622.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:42.694Z,1528898622.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:42.711Z,1528898622.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:03:42.712Z,1528898622.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:43.097Z,1528898623.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:43.115Z,1528898623.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:03:43.116Z,1528898623.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:43.493Z,1528898623.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:43.511Z,1528898623.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:03:43.512Z,1528898623.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:43.889Z,1528898623.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:43.907Z,1528898623.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:03:43.908Z,1528898623.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:44.290Z,1528898624.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:44.308Z,1528898624.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:03:44.309Z,1528898624.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:44.693Z,1528898624.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:44.711Z,1528898624.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:03:44.712Z,1528898624.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:45.098Z,1528898625.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:45.120Z,1528898625.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:03:45.141Z,1528898625.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:45.494Z,1528898625.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:45.516Z,1528898625.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:03:45.517Z,1528898625.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:45.886Z,1528898625.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:45.907Z,1528898625.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:03:45.908Z,1528898625.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:46.290Z,1528898626.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:46.307Z,1528898626.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:03:46.308Z,1528898626.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:46.694Z,1528898626.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:46.716Z,1528898626.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:03:46.717Z,1528898626.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:47.097Z,1528898627.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:47.119Z,1528898627.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:03:47.120Z,1528898627.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:47.494Z,1528898627.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:47.516Z,1528898627.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:03:47.517Z,1528898627.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:47.887Z,1528898627.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:47.918Z,1528898627.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:03:47.919Z,1528898627.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:48.290Z,1528898628.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:48.308Z,1528898628.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:03:48.308Z,1528898628.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:48.694Z,1528898628.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:48.716Z,1528898628.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:03:48.717Z,1528898628.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:49.097Z,1528898629.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:49.138Z,1528898629.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:03:49.139Z,1528898629.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:49.497Z,1528898629.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:49.519Z,1528898629.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:03:49.520Z,1528898629.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:49.890Z,1528898629.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:49.907Z,1528898629.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:03:49.908Z,1528898629.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:50.287Z,1528898630.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:50.309Z,1528898630.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:03:50.310Z,1528898630.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:50.694Z,1528898630.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:50.712Z,1528898630.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:03:50.713Z,1528898630.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:51.098Z,1528898631.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:51.115Z,1528898631.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:03:51.116Z,1528898631.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:51.494Z,1528898631.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:51.516Z,1528898631.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:03:51.517Z,1528898631.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:51.891Z,1528898631.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:51.908Z,1528898631.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:03:51.909Z,1528898631.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:52.289Z,1528898632.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:52.306Z,1528898632.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:03:52.307Z,1528898632.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:52.694Z,1528898632.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:52.716Z,1528898632.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:03:52.717Z,1528898632.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:53.098Z,1528898633.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:53.119Z,1528898633.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:03:53.120Z,1528898633.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:53.498Z,1528898633.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:53.515Z,1528898633.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:03:53.516Z,1528898633.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:53.887Z,1528898633.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:53.919Z,1528898633.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:03:53.920Z,1528898633.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:54.287Z,1528898634.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:54.311Z,1528898634.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:03:54.312Z,1528898634.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:54.695Z,1528898634.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:54.720Z,1528898634.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:03:54.721Z,1528898634.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:55.098Z,1528898635.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:55.116Z,1528898635.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:03:55.117Z,1528898635.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:55.498Z,1528898635.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:55.519Z,1528898635.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:03:55.520Z,1528898635.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:55.891Z,1528898635.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:55.908Z,1528898635.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:03:55.910Z,1528898635.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:56.293Z,1528898636.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:56.310Z,1528898636.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:03:56.311Z,1528898636.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:56.698Z,1528898636.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:56.715Z,1528898636.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T14:03:56.716Z,1528898636.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:57.098Z,1528898637.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:57.115Z,1528898637.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:57.494Z,1528898637.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:57.512Z,1528898637.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:57.892Z,1528898637.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:57.910Z,1528898637.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:58.292Z,1528898638.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:58.310Z,1528898638.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:58.695Z,1528898638.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:58.720Z,1528898638.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:59.098Z,1528898639.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:59.120Z,1528898639.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:59.494Z,1528898639.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:59.520Z,1528898639.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:03:59.887Z,1528898639.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:03:59.919Z,1528898639.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:00.287Z,1528898640.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:00.311Z,1528898640.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:00.698Z,1528898640.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:00.716Z,1528898640.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:01.097Z,1528898641.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:01.115Z,1528898641.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:01.497Z,1528898641.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:01.520Z,1528898641.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:01.890Z,1528898641.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:01.908Z,1528898641.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:02.287Z,1528898642.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:02.317Z,1528898642.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:02.701Z,1528898642.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:02.719Z,1528898642.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:03.098Z,1528898643.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:03.116Z,1528898643.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:03.498Z,1528898643.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:03.516Z,1528898643.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:03.896Z,1528898643.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:03.914Z,1528898643.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:04.291Z,1528898644.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:04.308Z,1528898644.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:04.699Z,1528898644.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:04.717Z,1528898644.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:05.100Z,1528898645.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:05.124Z,1528898645.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:05.497Z,1528898645.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:05.515Z,1528898645.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:05.888Z,1528898645.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:05.918Z,1528898645.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:06.287Z,1528898646.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:06.321Z,1528898646.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:06.695Z,1528898646.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:06.714Z,1528898646.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:07.102Z,1528898647.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:07.120Z,1528898647.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:07.503Z,1528898647.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:07.532Z,1528898647.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:07.879Z,1528898647.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:07.909Z,1528898647.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:08.284Z,1528898648.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:08.314Z,1528898648.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:08.683Z,1528898648.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:08.702Z,1528898648.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:09.094Z,1528898649.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:09.127Z,1528898649.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:09.498Z,1528898649.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:09.535Z,1528898649.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:09.898Z,1528898649.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:09.939Z,1528898649.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:10.282Z,1528898650.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:10.300Z,1528898650.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:10.686Z,1528898650.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:10.704Z,1528898650.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:11.087Z,1528898651.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:11.104Z,1528898651.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:11.482Z,1528898651.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:11.500Z,1528898651.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:11.898Z,1528898651.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:11.928Z,1528898651.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:12.301Z,1528898652.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:12.335Z,1528898652.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:12.690Z,1528898652.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:12.712Z,1528898652.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:13.088Z,1528898653.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:13.112Z,1528898653.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:13.489Z,1528898653.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:13.507Z,1528898653.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:13.885Z,1528898653.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:13.903Z,1528898653.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:14.289Z,1528898654.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:14.311Z,1528898654.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:14.689Z,1528898654.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:14.707Z,1528898654.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:15.094Z,1528898655.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:15.112Z,1528898655.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:15.498Z,1528898655.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:15.515Z,1528898655.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:15.898Z,1528898655.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:15.916Z,1528898655.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:16.288Z,1528898656.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:16.307Z,1528898656.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:16.688Z,1528898656.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:16.712Z,1528898656.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:17.088Z,1528898657.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:17.114Z,1528898657.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:17.488Z,1528898657.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:17.506Z,1528898657.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:17.894Z,1528898657.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:17.912Z,1528898657.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:18.301Z,1528898658.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:18.320Z,1528898658.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:18.694Z,1528898658.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:18.716Z,1528898658.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:19.087Z,1528898659.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:19.118Z,1528898659.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:19.490Z,1528898659.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:19.508Z,1528898659.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:19.888Z,1528898659.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:19.906Z,1528898659.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:20.287Z,1528898660.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:20.310Z,1528898660.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:20.690Z,1528898660.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:20.708Z,1528898660.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:21.095Z,1528898661.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:21.113Z,1528898661.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:21.498Z,1528898661.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:21.515Z,1528898661.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:21.898Z,1528898661.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:21.916Z,1528898661.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:22.289Z,1528898662.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:22.307Z,1528898662.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:22.682Z,1528898662.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:22.706Z,1528898662.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:23.090Z,1528898663.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:23.109Z,1528898663.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:23.483Z,1528898663.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:23.506Z,1528898663.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:23.898Z,1528898663.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:23.916Z,1528898663.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:24.298Z,1528898664.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:24.328Z,1528898664.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:24.699Z,1528898664.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:24.718Z,1528898664.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:25.087Z,1528898665.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:25.112Z,1528898665.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:25.483Z,1528898665.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:25.513Z,1528898665.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:25.884Z,1528898665.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:25.911Z,1528898665.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:26.284Z,1528898666.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:26.319Z,1528898666.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:26.683Z,1528898666.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:26.726Z,1528898666.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:27.100Z,1528898667.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:27.118Z,1528898667.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:27.503Z,1528898667.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:27.521Z,1528898667.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:27.905Z,1528898667.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:27.923Z,1528898667.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:28.283Z,1528898668.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:28.316Z,1528898668.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:28.693Z,1528898668.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:28.714Z,1528898668.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:29.084Z,1528898669.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:29.116Z,1528898669.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:29.493Z,1528898669.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:29.511Z,1528898669.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:29.899Z,1528898669.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:29.917Z,1528898669.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:30.303Z,1528898670.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:30.328Z,1528898670.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:30.331Z,1528898670.331 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T14:04:30.331Z,1528898670.331 [Default:CheckIn:C.Wait] Stopped
2018-06-13T14:04:30.331Z,1528898670.331 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T14:04:30.331Z,1528898670.331 [Default:CheckIn:D] Running Loop=1
2018-06-13T14:04:30.700Z,1528898670.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:30.718Z,1528898670.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:30.722Z,1528898670.722 [Default:CheckIn:D] Stopped
2018-06-13T14:04:30.722Z,1528898670.722 [Default:CheckIn:E] Running Loop=1
2018-06-13T14:04:31.087Z,1528898671.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:31.114Z,1528898671.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:31.117Z,1528898671.117 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 637.287956 min 
2018-06-13T14:04:31.117Z,1528898671.117 [Default:CheckIn:E] Stopped
2018-06-13T14:04:31.118Z,1528898671.118 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T14:04:31.118Z,1528898671.118 [Default:CheckIn] Stopped
2018-06-13T14:04:31.118Z,1528898671.118 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T14:04:31.118Z,1528898671.118 [Default:CheckIn](INFO): Running loop #62
2018-06-13T14:04:31.118Z,1528898671.118 [Default:CheckIn] Running Loop=62
2018-06-13T14:04:31.118Z,1528898671.118 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T14:04:31.118Z,1528898671.118 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T14:04:34.195Z,1528898674.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:34.226Z,1528898674.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:34.362Z,1528898674.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:34.380Z,1528898674.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:34.770Z,1528898674.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:34.788Z,1528898674.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:35.173Z,1528898675.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:35.191Z,1528898675.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:35.567Z,1528898675.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:35.585Z,1528898675.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:35.961Z,1528898675.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:35.980Z,1528898675.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:36.359Z,1528898676.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:36.384Z,1528898676.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:36.771Z,1528898676.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:36.796Z,1528898676.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:37.170Z,1528898677.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:37.192Z,1528898677.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:37.571Z,1528898677.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:37.589Z,1528898677.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:37.955Z,1528898677.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:37.979Z,1528898677.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:38.359Z,1528898678.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:38.382Z,1528898678.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:38.772Z,1528898678.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:38.791Z,1528898678.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:39.170Z,1528898679.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:39.192Z,1528898679.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:39.570Z,1528898679.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:39.588Z,1528898679.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:39.962Z,1528898679.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:39.980Z,1528898679.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:40.355Z,1528898680.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:40.378Z,1528898680.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:40.772Z,1528898680.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:40.790Z,1528898680.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:41.171Z,1528898681.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:41.189Z,1528898681.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:41.568Z,1528898681.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:41.592Z,1528898681.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:41.959Z,1528898681.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:41.983Z,1528898681.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:42.359Z,1528898682.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:42.384Z,1528898682.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:42.771Z,1528898682.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:42.790Z,1528898682.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:43.170Z,1528898683.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:43.192Z,1528898683.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:43.571Z,1528898683.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:43.596Z,1528898683.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:43.962Z,1528898683.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:43.980Z,1528898683.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:44.359Z,1528898684.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:44.382Z,1528898684.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:44.772Z,1528898684.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:44.790Z,1528898684.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:45.170Z,1528898685.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:45.188Z,1528898685.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:45.571Z,1528898685.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:45.589Z,1528898685.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:45.959Z,1528898685.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:45.996Z,1528898685.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:46.361Z,1528898686.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:46.392Z,1528898686.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:46.771Z,1528898686.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:46.790Z,1528898686.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:47.175Z,1528898687.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:47.194Z,1528898687.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:47.567Z,1528898687.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:47.586Z,1528898687.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:47.959Z,1528898687.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:47.994Z,1528898687.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:48.356Z,1528898688.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:48.387Z,1528898688.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:48.773Z,1528898688.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:48.791Z,1528898688.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:49.175Z,1528898689.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:49.193Z,1528898689.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:49.576Z,1528898689.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:49.594Z,1528898689.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:49.951Z,1528898689.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:49.988Z,1528898689.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:50.355Z,1528898690.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:50.392Z,1528898690.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:50.779Z,1528898690.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:50.797Z,1528898690.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:51.177Z,1528898691.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:51.195Z,1528898691.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:51.572Z,1528898691.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:51.590Z,1528898691.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:51.956Z,1528898691.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:51.995Z,1528898691.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:52.353Z,1528898692.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:52.382Z,1528898692.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:52.755Z,1528898692.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:52.782Z,1528898692.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:53.180Z,1528898693.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:53.199Z,1528898693.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:53.577Z,1528898693.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:53.595Z,1528898693.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:53.972Z,1528898693.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:53.990Z,1528898693.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:54.355Z,1528898694.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:54.385Z,1528898694.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:54.755Z,1528898694.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:54.783Z,1528898694.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:55.155Z,1528898695.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:55.184Z,1528898695.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:55.555Z,1528898695.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:55.584Z,1528898695.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:55.972Z,1528898695.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:55.990Z,1528898695.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:56.375Z,1528898696.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:56.394Z,1528898696.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:56.776Z,1528898696.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:56.795Z,1528898696.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:57.151Z,1528898697.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:57.188Z,1528898697.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:57.555Z,1528898697.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:57.582Z,1528898697.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:57.955Z,1528898697.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:57.985Z,1528898697.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:58.356Z,1528898698.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:58.383Z,1528898698.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:58.755Z,1528898698.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:58.788Z,1528898698.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:59.176Z,1528898699.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:59.195Z,1528898699.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:59.571Z,1528898699.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:59.589Z,1528898699.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:04:59.972Z,1528898699.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:04:59.989Z,1528898699.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:00.355Z,1528898700.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:00.386Z,1528898700.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:00.755Z,1528898700.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:00.787Z,1528898700.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:01.156Z,1528898701.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:01.187Z,1528898701.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:01.555Z,1528898701.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:01.592Z,1528898701.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:01.962Z,1528898701.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:01.999Z,1528898701.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:02.375Z,1528898702.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:02.392Z,1528898702.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:02.769Z,1528898702.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:02.795Z,1528898702.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:03.155Z,1528898703.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:03.187Z,1528898703.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:03.555Z,1528898703.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:03.591Z,1528898703.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:03.955Z,1528898703.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:03.996Z,1528898703.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:04.356Z,1528898704.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:04.390Z,1528898704.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:04.750Z,1528898704.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:04.768Z,1528898704.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:05.169Z,1528898705.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:05.198Z,1528898705.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:05.565Z,1528898705.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:05.600Z,1528898705.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:05.966Z,1528898705.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:05.000Z,1528898706.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:06.355Z,1528898706.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:06.374Z,1528898706.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:06.756Z,1528898706.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:06.774Z,1528898706.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:07.159Z,1528898707.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:07.177Z,1528898707.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:07.557Z,1528898707.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:07.575Z,1528898707.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:07.969Z,1528898707.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:08.002Z,1528898708.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:08.369Z,1528898708.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:08.402Z,1528898708.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:08.769Z,1528898708.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:08.811Z,1528898708.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:09.154Z,1528898709.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:09.172Z,1528898709.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:09.558Z,1528898709.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:09.576Z,1528898709.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:09.958Z,1528898709.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:09.976Z,1528898709.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:10.359Z,1528898710.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:10.376Z,1528898710.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:10.758Z,1528898710.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:10.775Z,1528898710.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:11.169Z,1528898711.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:11.203Z,1528898711.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:11.569Z,1528898711.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:11.602Z,1528898711.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:11.969Z,1528898711.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:12.002Z,1528898712.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:12.358Z,1528898712.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:12.376Z,1528898712.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:12.758Z,1528898712.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:12.776Z,1528898712.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:13.158Z,1528898713.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:13.180Z,1528898713.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:13.558Z,1528898713.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:13.577Z,1528898713.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:13.965Z,1528898713.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:13.983Z,1528898713.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:14.373Z,1528898714.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:14.406Z,1528898714.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:14.769Z,1528898714.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:14.803Z,1528898714.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:15.160Z,1528898715.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:15.178Z,1528898715.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:15.560Z,1528898715.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:15.585Z,1528898715.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:15.962Z,1528898715.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:15.980Z,1528898715.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:16.361Z,1528898716.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:16.379Z,1528898716.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:16.760Z,1528898716.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:16.777Z,1528898716.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:17.169Z,1528898717.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:17.188Z,1528898717.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:17.573Z,1528898717.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:17.591Z,1528898717.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:17.965Z,1528898717.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:17.983Z,1528898717.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:18.362Z,1528898718.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:18.384Z,1528898718.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:18.755Z,1528898718.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:18.785Z,1528898718.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:19.162Z,1528898719.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:19.179Z,1528898719.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:19.562Z,1528898719.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:19.580Z,1528898719.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:19.966Z,1528898719.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:19.984Z,1528898719.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:20.369Z,1528898720.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:20.392Z,1528898720.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:20.773Z,1528898720.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:20.791Z,1528898720.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:21.162Z,1528898721.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:21.180Z,1528898721.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:21.561Z,1528898721.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:21.579Z,1528898721.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:21.962Z,1528898721.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:21.984Z,1528898721.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:22.366Z,1528898722.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:22.384Z,1528898722.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:22.759Z,1528898722.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:22.790Z,1528898722.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:23.172Z,1528898723.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:23.190Z,1528898723.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:23.570Z,1528898723.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:23.588Z,1528898723.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:23.974Z,1528898723.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:23.992Z,1528898723.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:24.362Z,1528898724.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:24.380Z,1528898724.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:24.761Z,1528898724.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:24.779Z,1528898724.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:25.162Z,1528898725.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:25.181Z,1528898725.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:25.564Z,1528898725.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:25.583Z,1528898725.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:25.970Z,1528898725.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:25.992Z,1528898725.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:26.370Z,1528898726.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:26.388Z,1528898726.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:26.771Z,1528898726.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:26.789Z,1528898726.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:27.163Z,1528898727.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:27.182Z,1528898727.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:27.562Z,1528898727.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:27.583Z,1528898727.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:27.963Z,1528898727.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:27.981Z,1528898727.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:28.355Z,1528898728.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:28.379Z,1528898728.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:28.764Z,1528898728.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:28.782Z,1528898728.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:29.171Z,1528898729.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:29.189Z,1528898729.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:29.570Z,1528898729.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:29.592Z,1528898729.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:29.972Z,1528898729.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:29.990Z,1528898729.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:30.370Z,1528898730.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:30.388Z,1528898730.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:30.764Z,1528898730.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:30.782Z,1528898730.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:31.167Z,1528898731.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:31.185Z,1528898731.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:34.274Z,1528898734.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:34.292Z,1528898734.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:34.460Z,1528898734.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:34.478Z,1528898734.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:34.858Z,1528898734.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:34.876Z,1528898734.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:35.265Z,1528898735.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:35.283Z,1528898735.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:35.635Z,1528898735.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:35.669Z,1528898735.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:36.038Z,1528898736.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:36.072Z,1528898736.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:36.439Z,1528898736.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:36.473Z,1528898736.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:36.849Z,1528898736.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:36.883Z,1528898736.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:37.253Z,1528898737.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:37.281Z,1528898737.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:37.653Z,1528898737.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:37.682Z,1528898737.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:38.041Z,1528898738.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:38.059Z,1528898738.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:38.443Z,1528898738.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:38.461Z,1528898738.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:38.861Z,1528898738.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:38.889Z,1528898738.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:39.258Z,1528898739.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:39.283Z,1528898739.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:39.653Z,1528898739.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:39.687Z,1528898739.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:40.044Z,1528898740.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:40.062Z,1528898740.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:40.442Z,1528898740.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:40.460Z,1528898740.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:40.854Z,1528898740.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:40.891Z,1528898740.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:41.250Z,1528898741.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:41.268Z,1528898741.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:41.654Z,1528898741.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:41.672Z,1528898741.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:42.044Z,1528898742.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:42.064Z,1528898742.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:42.444Z,1528898742.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:42.462Z,1528898742.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:42.850Z,1528898742.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:42.868Z,1528898742.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:43.254Z,1528898743.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:43.272Z,1528898743.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:43.649Z,1528898743.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:43.673Z,1528898743.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:44.044Z,1528898744.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:44.062Z,1528898744.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:44.444Z,1528898744.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:44.461Z,1528898744.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:44.853Z,1528898744.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:44.871Z,1528898744.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:45.253Z,1528898745.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:45.271Z,1528898745.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:45.650Z,1528898745.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:45.667Z,1528898745.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:46.045Z,1528898746.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:46.063Z,1528898746.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:46.444Z,1528898746.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:46.468Z,1528898746.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:46.850Z,1528898746.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:46.868Z,1528898746.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:47.253Z,1528898747.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:47.270Z,1528898747.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:47.646Z,1528898747.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:47.664Z,1528898747.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:48.044Z,1528898748.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:48.061Z,1528898748.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:48.442Z,1528898748.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:48.459Z,1528898748.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:48.844Z,1528898748.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:48.862Z,1528898748.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:49.250Z,1528898749.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:49.268Z,1528898749.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:49.653Z,1528898749.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:49.671Z,1528898749.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:50.046Z,1528898750.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:50.068Z,1528898750.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:50.444Z,1528898750.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:50.462Z,1528898750.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:50.842Z,1528898750.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:50.859Z,1528898750.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:51.245Z,1528898751.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:51.263Z,1528898751.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:51.644Z,1528898751.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:51.662Z,1528898751.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:52.053Z,1528898752.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:52.071Z,1528898752.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:52.450Z,1528898752.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:52.468Z,1528898752.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:52.850Z,1528898752.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:52.872Z,1528898752.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:53.241Z,1528898753.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:53.259Z,1528898753.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:53.639Z,1528898753.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:53.662Z,1528898753.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:54.043Z,1528898754.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:54.068Z,1528898754.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:54.450Z,1528898754.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:54.467Z,1528898754.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:54.845Z,1528898754.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:54.863Z,1528898754.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:55.250Z,1528898755.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:55.272Z,1528898755.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:55.653Z,1528898755.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:55.670Z,1528898755.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:56.050Z,1528898756.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:56.072Z,1528898756.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:56.445Z,1528898756.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:56.463Z,1528898756.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:56.849Z,1528898756.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:56.872Z,1528898756.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:57.246Z,1528898757.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:57.264Z,1528898757.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:57.643Z,1528898757.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:57.665Z,1528898757.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:58.053Z,1528898758.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:58.071Z,1528898758.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:58.454Z,1528898758.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:58.472Z,1528898758.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:58.850Z,1528898758.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:58.872Z,1528898758.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:59.246Z,1528898759.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:59.264Z,1528898759.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:05:59.645Z,1528898759.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:05:59.663Z,1528898759.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:00.043Z,1528898760.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:00.065Z,1528898760.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:00.442Z,1528898760.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:00.460Z,1528898760.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:00.845Z,1528898760.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:00.863Z,1528898760.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:01.251Z,1528898761.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:01.269Z,1528898761.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:01.653Z,1528898761.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:01.670Z,1528898761.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:02.050Z,1528898762.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:02.068Z,1528898762.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:02.443Z,1528898762.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:02.465Z,1528898762.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:02.845Z,1528898762.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:02.863Z,1528898762.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:03.246Z,1528898763.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:03.272Z,1528898763.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:03.644Z,1528898763.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:03.662Z,1528898763.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:04.053Z,1528898764.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:04.076Z,1528898764.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:04.453Z,1528898764.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:04.471Z,1528898764.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:04.850Z,1528898764.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:04.872Z,1528898764.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:05.246Z,1528898765.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:05.263Z,1528898765.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:05.645Z,1528898765.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:05.668Z,1528898765.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:06.046Z,1528898766.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:06.064Z,1528898766.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:06.447Z,1528898766.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:06.465Z,1528898766.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:06.848Z,1528898766.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:06.866Z,1528898766.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:07.253Z,1528898767.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:07.271Z,1528898767.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:07.653Z,1528898767.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:07.670Z,1528898767.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:08.051Z,1528898768.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:08.070Z,1528898768.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:08.443Z,1528898768.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:08.474Z,1528898768.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:08.846Z,1528898768.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:08.875Z,1528898768.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:09.250Z,1528898769.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:09.267Z,1528898769.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:09.645Z,1528898769.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:09.662Z,1528898769.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:10.054Z,1528898770.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:10.080Z,1528898770.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:10.458Z,1528898770.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:10.476Z,1528898770.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:10.854Z,1528898770.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:10.872Z,1528898770.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:11.246Z,1528898771.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:11.264Z,1528898771.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:11.645Z,1528898771.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:11.663Z,1528898771.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:12.047Z,1528898772.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:12.072Z,1528898772.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:12.446Z,1528898772.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:12.463Z,1528898772.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:12.846Z,1528898772.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:12.864Z,1528898772.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:13.250Z,1528898773.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:13.272Z,1528898773.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:13.657Z,1528898773.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:13.704Z,1528898773.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:14.054Z,1528898774.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:14.071Z,1528898774.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:14.443Z,1528898774.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:14.465Z,1528898774.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:14.846Z,1528898774.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:14.864Z,1528898774.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:15.249Z,1528898775.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:15.267Z,1528898775.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:15.648Z,1528898775.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:15.666Z,1528898775.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:16.053Z,1528898776.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:16.071Z,1528898776.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:16.457Z,1528898776.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:16.475Z,1528898776.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:16.853Z,1528898776.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:16.872Z,1528898776.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:17.249Z,1528898777.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:17.267Z,1528898777.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:17.646Z,1528898777.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:17.664Z,1528898777.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:18.043Z,1528898778.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:18.079Z,1528898778.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:18.450Z,1528898778.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:18.479Z,1528898778.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:18.843Z,1528898778.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:18.861Z,1528898778.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:19.253Z,1528898779.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:19.271Z,1528898779.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:19.654Z,1528898779.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:19.672Z,1528898779.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:20.054Z,1528898780.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:20.071Z,1528898780.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:20.449Z,1528898780.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:20.467Z,1528898780.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:20.844Z,1528898780.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:20.868Z,1528898780.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:21.246Z,1528898781.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:21.264Z,1528898781.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:21.648Z,1528898781.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:21.667Z,1528898781.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:22.058Z,1528898782.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:22.080Z,1528898782.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:22.453Z,1528898782.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:22.476Z,1528898782.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:22.850Z,1528898782.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:22.869Z,1528898782.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:23.245Z,1528898783.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:23.272Z,1528898783.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:23.645Z,1528898783.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:23.663Z,1528898783.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:24.049Z,1528898784.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:24.066Z,1528898784.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:24.443Z,1528898784.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:24.479Z,1528898784.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:24.839Z,1528898784.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:24.864Z,1528898784.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:25.257Z,1528898785.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:25.275Z,1528898785.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:25.655Z,1528898785.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:25.672Z,1528898785.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:26.054Z,1528898786.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:26.072Z,1528898786.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:26.443Z,1528898786.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:26.469Z,1528898786.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:26.848Z,1528898786.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:26.866Z,1528898786.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:27.250Z,1528898787.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:27.268Z,1528898787.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:27.649Z,1528898787.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:27.666Z,1528898787.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:28.058Z,1528898788.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:28.088Z,1528898788.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:28.459Z,1528898788.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:28.477Z,1528898788.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:28.859Z,1528898788.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:28.884Z,1528898788.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:29.240Z,1528898789.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:29.277Z,1528898789.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:29.649Z,1528898789.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:29.667Z,1528898789.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:30.037Z,1528898790.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:30.071Z,1528898790.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:30.446Z,1528898790.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:30.472Z,1528898790.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:30.836Z,1528898790.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:30.871Z,1528898790.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:31.259Z,1528898791.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:31.284Z,1528898791.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:34.362Z,1528898794.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:34.379Z,1528898794.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:34.501Z,1528898794.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:34.525Z,1528898794.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:34.887Z,1528898794.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:34.914Z,1528898794.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:35.288Z,1528898795.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:35.319Z,1528898795.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:35.679Z,1528898795.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:35.708Z,1528898795.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:36.104Z,1528898796.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:36.122Z,1528898796.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:36.493Z,1528898796.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:36.529Z,1528898796.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:36.893Z,1528898796.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:36.928Z,1528898796.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:37.283Z,1528898797.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:37.316Z,1528898797.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:37.683Z,1528898797.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:37.713Z,1528898797.713 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:37.714Z,1528898797.714 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 213
2018-06-13T14:06:37.714Z,1528898797.714 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:06:37.715Z,1528898797.715 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:37.715Z,1528898797.715 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 213
2018-06-13T14:06:37.716Z,1528898797.716 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:06:37.721Z,1528898797.721 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:37.722Z,1528898797.722 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 213
2018-06-13T14:06:37.722Z,1528898797.722 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:06:37.805Z,1528898797.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:06:37.805Z,1528898797.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:06:37.806Z,1528898797.806 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:06:38.084Z,1528898798.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:38.201Z,1528898798.201 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:06:38.202Z,1528898798.202 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 213
2018-06-13T14:06:38.202Z,1528898798.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:06:38.202Z,1528898798.202 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 213
2018-06-13T14:06:38.203Z,1528898798.203 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:06:38.203Z,1528898798.203 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 213
2018-06-13T14:06:38.488Z,1528898798.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:38.505Z,1528898798.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:06:38.506Z,1528898798.506 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:06:38.506Z,1528898798.506 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:06:38.506Z,1528898798.506 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:06:38.507Z,1528898798.507 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:06:38.507Z,1528898798.507 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:06:38.507Z,1528898798.507 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:06:38.508Z,1528898798.508 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:06:38.508Z,1528898798.508 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:06:38.882Z,1528898798.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:38.916Z,1528898798.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:06:38.917Z,1528898798.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:39.298Z,1528898799.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:39.316Z,1528898799.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:06:39.317Z,1528898799.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:39.698Z,1528898799.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:39.716Z,1528898799.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:06:39.717Z,1528898799.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:40.100Z,1528898800.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:40.118Z,1528898800.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:06:40.118Z,1528898800.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:40.483Z,1528898800.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:40.506Z,1528898800.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:06:40.507Z,1528898800.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:40.893Z,1528898800.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:40.916Z,1528898800.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:06:40.917Z,1528898800.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:41.287Z,1528898801.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:41.312Z,1528898801.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:06:41.313Z,1528898801.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:41.689Z,1528898801.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:41.706Z,1528898801.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:06:41.707Z,1528898801.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:42.098Z,1528898802.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:42.116Z,1528898802.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:06:42.117Z,1528898802.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:42.501Z,1528898802.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:42.519Z,1528898802.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:06:42.520Z,1528898802.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:42.897Z,1528898802.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:42.915Z,1528898802.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:06:42.916Z,1528898802.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:43.293Z,1528898803.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:43.310Z,1528898803.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:06:43.311Z,1528898803.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:43.685Z,1528898803.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:43.702Z,1528898803.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:06:43.703Z,1528898803.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:44.087Z,1528898804.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:44.110Z,1528898804.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:06:44.111Z,1528898804.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:44.487Z,1528898804.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:44.510Z,1528898804.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:06:44.511Z,1528898804.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:44.888Z,1528898804.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:44.920Z,1528898804.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:06:44.922Z,1528898804.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:45.298Z,1528898805.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:45.323Z,1528898805.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:06:45.324Z,1528898805.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:45.701Z,1528898805.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:45.719Z,1528898805.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:06:45.720Z,1528898805.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:46.101Z,1528898806.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:46.119Z,1528898806.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:06:46.120Z,1528898806.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:46.489Z,1528898806.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:46.506Z,1528898806.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:06:46.507Z,1528898806.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:46.887Z,1528898806.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:46.910Z,1528898806.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:06:46.911Z,1528898806.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:47.295Z,1528898807.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:47.316Z,1528898807.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:06:47.317Z,1528898807.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:47.689Z,1528898807.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:47.707Z,1528898807.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:06:47.708Z,1528898807.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:48.099Z,1528898808.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:48.116Z,1528898808.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:06:48.118Z,1528898808.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:48.498Z,1528898808.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:48.538Z,1528898808.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:06:48.539Z,1528898808.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:48.899Z,1528898808.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:48.920Z,1528898808.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:06:48.922Z,1528898808.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:49.293Z,1528898809.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:49.316Z,1528898809.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:06:49.317Z,1528898809.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:49.696Z,1528898809.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:49.714Z,1528898809.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:06:49.715Z,1528898809.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:50.083Z,1528898810.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:50.106Z,1528898810.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:06:50.107Z,1528898810.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:50.494Z,1528898810.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:50.512Z,1528898810.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:06:50.513Z,1528898810.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:50.894Z,1528898810.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:50.912Z,1528898810.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:06:50.913Z,1528898810.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:51.299Z,1528898811.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:51.317Z,1528898811.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:06:51.318Z,1528898811.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:51.703Z,1528898811.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:51.721Z,1528898811.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:06:51.722Z,1528898811.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:52.102Z,1528898812.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:52.131Z,1528898812.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:06:52.131Z,1528898812.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:52.491Z,1528898812.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:52.509Z,1528898812.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:06:52.510Z,1528898812.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:52.893Z,1528898812.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:52.916Z,1528898812.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:06:52.917Z,1528898812.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:53.293Z,1528898813.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:53.312Z,1528898813.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:06:53.313Z,1528898813.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:53.685Z,1528898813.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:53.710Z,1528898813.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:06:53.711Z,1528898813.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:54.102Z,1528898814.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:54.120Z,1528898814.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:06:54.121Z,1528898814.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:54.503Z,1528898814.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:54.521Z,1528898814.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:06:54.522Z,1528898814.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:54.899Z,1528898814.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:54.918Z,1528898814.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:06:54.919Z,1528898814.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:55.284Z,1528898815.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:55.314Z,1528898815.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:06:55.315Z,1528898815.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:55.690Z,1528898815.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:55.720Z,1528898815.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:06:55.725Z,1528898815.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:56.087Z,1528898816.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:56.114Z,1528898816.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:06:56.115Z,1528898816.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:56.483Z,1528898816.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:56.516Z,1528898816.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:06:56.517Z,1528898816.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:56.886Z,1528898816.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:56.914Z,1528898816.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:06:56.915Z,1528898816.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:57.294Z,1528898817.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:57.318Z,1528898817.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:06:57.319Z,1528898817.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:57.707Z,1528898817.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:57.732Z,1528898817.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:58.107Z,1528898818.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:58.126Z,1528898818.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:58.485Z,1528898818.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:58.516Z,1528898818.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:58.886Z,1528898818.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:58.916Z,1528898818.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:59.288Z,1528898819.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:59.318Z,1528898819.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:06:59.683Z,1528898819.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:06:59.715Z,1528898819.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:00.102Z,1528898820.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:00.124Z,1528898820.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:00.508Z,1528898820.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:00.527Z,1528898820.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:00.904Z,1528898820.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:00.928Z,1528898820.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:01.288Z,1528898821.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:01.316Z,1528898821.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:01.684Z,1528898821.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:01.718Z,1528898821.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:02.085Z,1528898822.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:02.114Z,1528898822.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:02.483Z,1528898822.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:02.521Z,1528898822.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:02.884Z,1528898822.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:02.922Z,1528898822.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:03.312Z,1528898823.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:03.330Z,1528898823.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:03.693Z,1528898823.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:03.727Z,1528898823.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:04.097Z,1528898824.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:04.136Z,1528898824.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:04.488Z,1528898824.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:04.526Z,1528898824.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:04.883Z,1528898824.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:04.924Z,1528898824.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:05.290Z,1528898825.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:05.308Z,1528898825.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:05.687Z,1528898825.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:05.706Z,1528898825.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:06.102Z,1528898826.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:06.140Z,1528898826.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:06.500Z,1528898826.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:06.519Z,1528898826.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:06.897Z,1528898826.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:06.915Z,1528898826.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:07.293Z,1528898827.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:07.312Z,1528898827.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:07.690Z,1528898827.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:07.729Z,1528898827.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:08.089Z,1528898828.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:08.136Z,1528898828.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:08.492Z,1528898828.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:08.535Z,1528898828.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:08.888Z,1528898828.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:08.929Z,1528898828.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:09.292Z,1528898829.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:09.331Z,1528898829.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:09.699Z,1528898829.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:09.720Z,1528898829.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:10.101Z,1528898830.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:10.120Z,1528898830.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:10.493Z,1528898830.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:10.511Z,1528898830.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:10.891Z,1528898830.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:10.922Z,1528898830.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:11.287Z,1528898831.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:11.342Z,1528898831.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:11.690Z,1528898831.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:11.728Z,1528898831.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:12.102Z,1528898832.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:12.120Z,1528898832.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:12.500Z,1528898832.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:12.524Z,1528898832.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:12.899Z,1528898832.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:12.922Z,1528898832.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:13.294Z,1528898833.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:13.315Z,1528898833.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:13.691Z,1528898833.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:13.731Z,1528898833.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:14.082Z,1528898834.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:14.115Z,1528898834.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:14.484Z,1528898834.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:14.528Z,1528898834.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:14.883Z,1528898834.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:14.917Z,1528898834.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:15.303Z,1528898835.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:15.322Z,1528898835.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:15.704Z,1528898835.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:15.728Z,1528898835.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:16.103Z,1528898836.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:16.126Z,1528898836.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:16.479Z,1528898836.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:16.524Z,1528898836.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:16.883Z,1528898836.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:16.917Z,1528898836.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:17.293Z,1528898837.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:17.311Z,1528898837.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:17.684Z,1528898837.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:17.728Z,1528898837.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:18.100Z,1528898838.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:18.122Z,1528898838.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:18.507Z,1528898838.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:18.526Z,1528898838.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:18.899Z,1528898838.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:18.917Z,1528898838.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:19.283Z,1528898839.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:19.326Z,1528898839.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:19.683Z,1528898839.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:19.729Z,1528898839.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:20.083Z,1528898840.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:20.116Z,1528898840.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:20.485Z,1528898840.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:20.525Z,1528898840.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:20.883Z,1528898840.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:20.916Z,1528898840.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:21.289Z,1528898841.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:21.325Z,1528898841.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:21.704Z,1528898841.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:21.730Z,1528898841.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:22.100Z,1528898842.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:22.131Z,1528898842.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:22.483Z,1528898842.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:22.528Z,1528898842.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:22.883Z,1528898842.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:22.928Z,1528898842.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:23.287Z,1528898843.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:23.335Z,1528898843.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:23.683Z,1528898843.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:23.721Z,1528898843.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:24.097Z,1528898844.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:24.139Z,1528898844.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:24.498Z,1528898844.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:24.535Z,1528898844.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:24.897Z,1528898844.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:24.933Z,1528898844.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:25.286Z,1528898845.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:25.334Z,1528898845.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:25.685Z,1528898845.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:25.736Z,1528898845.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:26.085Z,1528898846.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:26.103Z,1528898846.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:26.488Z,1528898846.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:26.515Z,1528898846.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:26.888Z,1528898846.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:26.916Z,1528898846.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:27.297Z,1528898847.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:27.347Z,1528898847.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:27.697Z,1528898847.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:27.718Z,1528898847.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:28.098Z,1528898848.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:28.133Z,1528898848.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:28.486Z,1528898848.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:28.509Z,1528898848.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:28.887Z,1528898848.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:28.919Z,1528898848.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:29.289Z,1528898849.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:29.312Z,1528898849.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:29.690Z,1528898849.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:29.718Z,1528898849.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:30.100Z,1528898850.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:30.121Z,1528898850.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:30.499Z,1528898850.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:30.552Z,1528898850.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:30.899Z,1528898850.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:30.916Z,1528898850.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:31.293Z,1528898851.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:31.316Z,1528898851.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:31.694Z,1528898851.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:31.718Z,1528898851.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:32.092Z,1528898852.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:32.116Z,1528898852.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:32.494Z,1528898852.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:32.512Z,1528898852.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:35.598Z,1528898855.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:35.616Z,1528898855.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:35.741Z,1528898855.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:35.775Z,1528898855.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:36.148Z,1528898856.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:36.166Z,1528898856.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:36.549Z,1528898856.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:36.567Z,1528898856.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:36.923Z,1528898856.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:36.970Z,1528898856.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:37.324Z,1528898857.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:37.356Z,1528898857.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:37.725Z,1528898857.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:37.755Z,1528898857.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:38.140Z,1528898858.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:38.158Z,1528898858.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:38.544Z,1528898858.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:38.569Z,1528898858.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:38.948Z,1528898858.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:38.966Z,1528898858.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:39.323Z,1528898859.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:39.354Z,1528898859.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:39.725Z,1528898859.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:39.760Z,1528898859.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:40.123Z,1528898860.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:40.160Z,1528898860.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:40.524Z,1528898860.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:40.563Z,1528898860.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:40.923Z,1528898860.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:40.954Z,1528898860.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:41.345Z,1528898861.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:41.368Z,1528898861.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:41.743Z,1528898861.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:41.766Z,1528898861.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:42.142Z,1528898862.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:42.163Z,1528898862.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:42.524Z,1528898862.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:42.558Z,1528898862.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:42.927Z,1528898862.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:42.956Z,1528898862.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:43.324Z,1528898863.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:43.366Z,1528898863.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:43.723Z,1528898863.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:43.760Z,1528898863.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:44.135Z,1528898864.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:44.169Z,1528898864.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:44.539Z,1528898864.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:44.566Z,1528898864.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:44.938Z,1528898864.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:44.972Z,1528898864.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:45.319Z,1528898865.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:45.371Z,1528898865.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:45.723Z,1528898865.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:45.762Z,1528898865.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:46.129Z,1528898866.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:46.164Z,1528898866.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:46.524Z,1528898866.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:46.575Z,1528898866.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:46.928Z,1528898866.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:46.974Z,1528898866.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:47.339Z,1528898867.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:47.376Z,1528898867.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:47.736Z,1528898867.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:47.770Z,1528898867.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:48.138Z,1528898868.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:48.184Z,1528898868.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:48.526Z,1528898868.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:48.544Z,1528898868.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:48.925Z,1528898868.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:48.948Z,1528898868.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:49.328Z,1528898869.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:49.350Z,1528898869.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:49.724Z,1528898869.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:49.777Z,1528898869.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:50.134Z,1528898870.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:50.158Z,1528898870.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:50.537Z,1528898870.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:50.577Z,1528898870.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:50.938Z,1528898870.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:50.964Z,1528898870.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:51.329Z,1528898871.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:51.387Z,1528898871.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:51.730Z,1528898871.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:51.747Z,1528898871.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:52.130Z,1528898872.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:52.153Z,1528898872.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:52.523Z,1528898872.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:52.559Z,1528898872.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:52.927Z,1528898872.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:52.950Z,1528898872.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:53.342Z,1528898873.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:53.366Z,1528898873.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:53.739Z,1528898873.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:53.762Z,1528898873.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:54.139Z,1528898874.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:54.159Z,1528898874.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:54.531Z,1528898874.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:54.557Z,1528898874.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:54.919Z,1528898874.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:54.956Z,1528898874.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:55.327Z,1528898875.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:55.356Z,1528898875.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:55.719Z,1528898875.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:55.752Z,1528898875.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:56.134Z,1528898876.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:56.156Z,1528898876.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:56.542Z,1528898876.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:56.562Z,1528898876.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:56.942Z,1528898876.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:56.972Z,1528898876.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:57.329Z,1528898877.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:57.352Z,1528898877.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:57.723Z,1528898877.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:57.759Z,1528898877.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:58.119Z,1528898878.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:58.147Z,1528898878.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:58.520Z,1528898878.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:58.561Z,1528898878.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:58.923Z,1528898878.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:58.964Z,1528898878.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:59.348Z,1528898879.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:59.366Z,1528898879.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:07:59.738Z,1528898879.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:07:59.761Z,1528898879.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:00.138Z,1528898880.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:00.166Z,1528898880.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:00.519Z,1528898880.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:00.555Z,1528898880.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:00.919Z,1528898880.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:00.953Z,1528898880.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:01.325Z,1528898881.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:01.359Z,1528898881.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:01.723Z,1528898881.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:01.740Z,1528898881.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:02.133Z,1528898882.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:02.172Z,1528898882.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:02.537Z,1528898882.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:02.570Z,1528898882.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:02.933Z,1528898882.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:02.977Z,1528898882.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:03.326Z,1528898883.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:03.345Z,1528898883.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:03.726Z,1528898883.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:03.744Z,1528898883.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:04.126Z,1528898884.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:04.144Z,1528898884.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:04.526Z,1528898884.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:04.544Z,1528898884.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:04.926Z,1528898884.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:04.944Z,1528898884.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:05.332Z,1528898885.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:05.351Z,1528898885.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:05.737Z,1528898885.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:05.755Z,1528898885.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:06.137Z,1528898886.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:06.155Z,1528898886.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:06.529Z,1528898886.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:06.547Z,1528898886.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:06.929Z,1528898886.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:06.947Z,1528898886.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:07.329Z,1528898887.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:07.347Z,1528898887.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:07.726Z,1528898887.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:07.743Z,1528898887.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:08.134Z,1528898888.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:08.152Z,1528898888.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:08.538Z,1528898888.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:08.565Z,1528898888.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:08.939Z,1528898888.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:08.964Z,1528898888.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:09.329Z,1528898889.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:09.355Z,1528898889.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:09.727Z,1528898889.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:09.750Z,1528898889.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:10.126Z,1528898890.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:10.144Z,1528898890.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:10.530Z,1528898890.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:10.548Z,1528898890.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:10.934Z,1528898890.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:10.952Z,1528898890.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:11.339Z,1528898891.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:11.357Z,1528898891.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:11.747Z,1528898891.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:11.789Z,1528898891.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:12.143Z,1528898892.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:12.161Z,1528898892.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:12.520Z,1528898892.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:12.548Z,1528898892.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:12.924Z,1528898892.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:12.953Z,1528898892.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:13.323Z,1528898893.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:13.353Z,1528898893.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:13.724Z,1528898893.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:13.752Z,1528898893.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:14.140Z,1528898894.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:14.158Z,1528898894.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:14.538Z,1528898894.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:14.561Z,1528898894.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:14.944Z,1528898894.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:14.977Z,1528898894.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:15.323Z,1528898895.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:15.356Z,1528898895.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:15.723Z,1528898895.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:15.756Z,1528898895.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:16.123Z,1528898896.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:16.157Z,1528898896.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:16.524Z,1528898896.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:16.562Z,1528898896.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:16.923Z,1528898896.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:16.965Z,1528898896.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:17.336Z,1528898897.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:17.373Z,1528898897.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:17.737Z,1528898897.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:17.768Z,1528898897.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:18.133Z,1528898898.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:18.160Z,1528898898.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:18.524Z,1528898898.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:18.567Z,1528898898.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:18.923Z,1528898898.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:18.957Z,1528898898.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:19.324Z,1528898899.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:19.364Z,1528898899.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:19.727Z,1528898899.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:19.746Z,1528898899.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:20.137Z,1528898900.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:20.175Z,1528898900.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:20.537Z,1528898900.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:20.555Z,1528898900.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:20.937Z,1528898900.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:20.955Z,1528898900.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:21.330Z,1528898901.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:21.347Z,1528898901.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:21.727Z,1528898901.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:21.750Z,1528898901.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:22.139Z,1528898902.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:22.164Z,1528898902.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:22.539Z,1528898902.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:22.556Z,1528898902.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:22.939Z,1528898902.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:22.957Z,1528898902.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:23.331Z,1528898903.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:23.353Z,1528898903.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:23.728Z,1528898903.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:23.746Z,1528898903.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:24.138Z,1528898904.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:24.156Z,1528898904.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:24.541Z,1528898904.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:24.564Z,1528898904.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:24.938Z,1528898904.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:24.956Z,1528898904.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:25.324Z,1528898905.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:25.350Z,1528898905.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:25.728Z,1528898905.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:25.760Z,1528898905.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:26.136Z,1528898906.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:26.154Z,1528898906.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:26.539Z,1528898906.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:26.564Z,1528898906.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:26.938Z,1528898906.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:26.980Z,1528898906.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:27.330Z,1528898907.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:27.348Z,1528898907.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:27.727Z,1528898907.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:27.760Z,1528898907.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:28.142Z,1528898908.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:28.182Z,1528898908.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:28.540Z,1528898908.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:28.559Z,1528898908.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:28.939Z,1528898908.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:28.964Z,1528898908.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:29.328Z,1528898909.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:29.356Z,1528898909.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:29.719Z,1528898909.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:29.756Z,1528898909.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:30.139Z,1528898910.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:30.157Z,1528898910.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:30.544Z,1528898910.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:30.563Z,1528898910.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:30.939Z,1528898910.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:30.957Z,1528898910.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:31.324Z,1528898911.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:31.352Z,1528898911.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:31.731Z,1528898911.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:31.756Z,1528898911.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:32.143Z,1528898912.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:32.161Z,1528898912.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:32.546Z,1528898912.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:32.568Z,1528898912.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:32.947Z,1528898912.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:32.965Z,1528898912.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:33.333Z,1528898913.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:33.353Z,1528898913.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:33.733Z,1528898913.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:33.751Z,1528898913.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:34.144Z,1528898914.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:34.162Z,1528898914.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:34.543Z,1528898914.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:34.561Z,1528898914.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:34.943Z,1528898914.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:34.961Z,1528898914.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:38.049Z,1528898918.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:38.067Z,1528898918.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:38.168Z,1528898918.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:38.208Z,1528898918.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:38.591Z,1528898918.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:38.610Z,1528898918.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:38.996Z,1528898918.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:39.020Z,1528898919.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:39.377Z,1528898919.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:39.418Z,1528898919.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:39.771Z,1528898919.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:39.809Z,1528898919.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:40.172Z,1528898920.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:40.199Z,1528898920.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:40.572Z,1528898920.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:40.606Z,1528898920.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:40.971Z,1528898920.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:40.988Z,1528898920.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:41.390Z,1528898921.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:41.421Z,1528898921.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:41.785Z,1528898921.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:41.830Z,1528898921.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:42.186Z,1528898922.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:42.230Z,1528898922.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:42.574Z,1528898922.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:42.591Z,1528898922.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:42.974Z,1528898922.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:42.992Z,1528898922.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:43.376Z,1528898923.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:43.394Z,1528898923.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:43.778Z,1528898923.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:43.796Z,1528898923.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:44.182Z,1528898924.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:44.218Z,1528898924.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:44.585Z,1528898924.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:44.604Z,1528898924.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:44.985Z,1528898924.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:45.004Z,1528898925.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:45.377Z,1528898925.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:45.395Z,1528898925.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:45.775Z,1528898925.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:45.801Z,1528898925.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:46.178Z,1528898926.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:46.196Z,1528898926.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:46.568Z,1528898926.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:46.601Z,1528898926.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:46.975Z,1528898926.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:46.000Z,1528898927.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:47.391Z,1528898927.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:47.410Z,1528898927.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:47.787Z,1528898927.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:47.805Z,1528898927.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:48.186Z,1528898928.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:48.205Z,1528898928.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:48.578Z,1528898928.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:48.596Z,1528898928.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:48.977Z,1528898928.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:49.001Z,1528898929.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:49.377Z,1528898929.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:49.395Z,1528898929.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:49.775Z,1528898929.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:49.809Z,1528898929.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:50.187Z,1528898930.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:50.214Z,1528898930.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:50.591Z,1528898930.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:50.610Z,1528898930.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:50.987Z,1528898930.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:51.006Z,1528898931.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:51.372Z,1528898931.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:51.399Z,1528898931.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:51.772Z,1528898931.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:51.799Z,1528898931.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:52.192Z,1528898932.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:52.216Z,1528898932.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:52.587Z,1528898932.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:52.605Z,1528898932.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:52.987Z,1528898932.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:53.006Z,1528898933.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:53.372Z,1528898933.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:53.411Z,1528898933.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:53.772Z,1528898933.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:53.799Z,1528898933.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:54.187Z,1528898934.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:54.206Z,1528898934.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:54.592Z,1528898934.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:54.616Z,1528898934.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:54.984Z,1528898934.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:55.005Z,1528898935.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:55.367Z,1528898935.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:55.401Z,1528898935.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:55.767Z,1528898935.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:55.798Z,1528898935.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:56.185Z,1528898936.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:56.228Z,1528898936.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:56.585Z,1528898936.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:56.624Z,1528898936.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:56.985Z,1528898936.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:57.011Z,1528898937.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:57.375Z,1528898937.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:57.393Z,1528898937.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:57.774Z,1528898937.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:57.792Z,1528898937.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:58.186Z,1528898938.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:58.225Z,1528898938.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:58.583Z,1528898938.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:58.621Z,1528898938.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:58.986Z,1528898938.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:59.004Z,1528898939.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:59.379Z,1528898939.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:59.398Z,1528898939.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:08:59.771Z,1528898939.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:08:59.804Z,1528898939.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:00.182Z,1528898940.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:00.202Z,1528898940.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:00.586Z,1528898940.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:00.628Z,1528898940.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:00.982Z,1528898940.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:01.005Z,1528898941.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:01.378Z,1528898941.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:01.395Z,1528898941.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:01.778Z,1528898941.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:01.796Z,1528898941.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:02.182Z,1528898942.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:02.200Z,1528898942.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:02.585Z,1528898942.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:02.604Z,1528898942.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:02.985Z,1528898942.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:03.004Z,1528898943.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:03.379Z,1528898943.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:03.398Z,1528898943.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:03.777Z,1528898943.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:03.794Z,1528898943.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:04.185Z,1528898944.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:04.204Z,1528898944.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:04.582Z,1528898944.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:04.605Z,1528898944.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:04.982Z,1528898944.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:05.004Z,1528898945.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:05.380Z,1528898945.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:05.398Z,1528898945.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:05.778Z,1528898945.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:05.801Z,1528898945.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:06.182Z,1528898946.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:06.201Z,1528898946.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:06.585Z,1528898946.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:06.604Z,1528898946.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:06.982Z,1528898946.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:07.013Z,1528898947.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:07.378Z,1528898947.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:07.396Z,1528898947.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:07.771Z,1528898947.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:07.797Z,1528898947.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:08.187Z,1528898948.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:08.208Z,1528898948.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:08.586Z,1528898948.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:08.605Z,1528898948.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:08.988Z,1528898948.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:09.006Z,1528898949.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:09.372Z,1528898949.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:09.400Z,1528898949.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:09.775Z,1528898949.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:09.799Z,1528898949.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:10.187Z,1528898950.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:10.206Z,1528898950.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:10.586Z,1528898950.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:10.605Z,1528898950.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:10.987Z,1528898950.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:11.005Z,1528898951.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:11.378Z,1528898951.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:11.399Z,1528898951.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:11.771Z,1528898951.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:11.796Z,1528898951.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:12.187Z,1528898952.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:12.206Z,1528898952.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:12.586Z,1528898952.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:12.612Z,1528898952.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:12.990Z,1528898952.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:13.016Z,1528898953.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:13.375Z,1528898953.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:13.409Z,1528898953.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:13.771Z,1528898953.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:13.811Z,1528898953.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:14.183Z,1528898954.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:14.207Z,1528898954.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:14.591Z,1528898954.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:14.610Z,1528898954.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:14.990Z,1528898954.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:15.020Z,1528898955.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:15.372Z,1528898955.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:15.399Z,1528898955.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:15.771Z,1528898955.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:15.805Z,1528898955.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:16.192Z,1528898956.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:16.216Z,1528898956.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:16.586Z,1528898956.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:16.604Z,1528898956.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:16.981Z,1528898956.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:17.020Z,1528898957.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:17.372Z,1528898957.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:17.408Z,1528898957.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:17.771Z,1528898957.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:17.799Z,1528898957.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:18.188Z,1528898958.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:18.206Z,1528898958.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:18.587Z,1528898958.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:18.619Z,1528898958.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:18.983Z,1528898958.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:19.003Z,1528898959.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:19.372Z,1528898959.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:19.399Z,1528898959.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:19.771Z,1528898959.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:19.802Z,1528898959.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:20.187Z,1528898960.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:20.212Z,1528898960.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:20.591Z,1528898960.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:20.610Z,1528898960.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:20.992Z,1528898960.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:21.016Z,1528898961.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:21.372Z,1528898961.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:21.399Z,1528898961.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:21.771Z,1528898961.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:21.799Z,1528898961.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:22.192Z,1528898962.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:22.216Z,1528898962.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:22.592Z,1528898962.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:22.616Z,1528898962.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:22.987Z,1528898962.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:23.006Z,1528898963.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:23.367Z,1528898963.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:23.410Z,1528898963.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:23.768Z,1528898963.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:23.800Z,1528898963.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:24.171Z,1528898964.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:24.198Z,1528898964.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:24.593Z,1528898964.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:24.616Z,1528898964.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:24.987Z,1528898964.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:25.005Z,1528898965.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:25.381Z,1528898965.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:25.405Z,1528898965.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:25.771Z,1528898965.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:25.815Z,1528898965.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:26.167Z,1528898966.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:26.208Z,1528898966.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:26.570Z,1528898966.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:26.610Z,1528898966.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:26.971Z,1528898966.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:27.000Z,1528898967.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:27.388Z,1528898967.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:27.406Z,1528898967.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:27.790Z,1528898967.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:27.835Z,1528898967.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:28.191Z,1528898968.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:28.210Z,1528898968.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:28.567Z,1528898968.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:28.605Z,1528898968.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:28.971Z,1528898968.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:28.998Z,1528898968.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:29.372Z,1528898969.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:29.410Z,1528898969.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:29.772Z,1528898969.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:29.799Z,1528898969.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:30.171Z,1528898970.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:30.205Z,1528898970.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:30.592Z,1528898970.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:30.617Z,1528898970.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:30.991Z,1528898970.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:31.010Z,1528898971.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:31.392Z,1528898971.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:31.416Z,1528898971.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:31.420Z,1528898971.420 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T14:04:31.1Z
2018-06-13T14:09:31.420Z,1528898971.420 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T14:09:31.420Z,1528898971.420 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T14:09:31.775Z,1528898971.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:31.805Z,1528898971.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:32.914Z,1528898972.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:32.946Z,1528898972.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:33.063Z,1528898973.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:33.112Z,1528898973.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:33.489Z,1528898973.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:33.511Z,1528898973.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:33.873Z,1528898973.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:33.921Z,1528898973.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:34.283Z,1528898974.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:34.301Z,1528898974.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:34.664Z,1528898974.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:34.691Z,1528898974.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:37.811Z,1528898977.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:37.845Z,1528898977.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:37.944Z,1528898977.944 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0248.lzma
2018-06-13T14:09:37.971Z,1528898977.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:38.007Z,1528898978.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:38.373Z,1528898978.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:38.401Z,1528898978.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:38.741Z,1528898978.741 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0248.lzma.bak
2018-06-13T14:09:38.741Z,1528898978.741 [DataOverHttps](INFO): SBD MOMSN=8329353
2018-06-13T14:09:38.777Z,1528898978.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:38.811Z,1528898978.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:38.811Z,1528898978.811 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 214
2018-06-13T14:09:38.811Z,1528898978.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:09:38.813Z,1528898978.813 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:38.813Z,1528898978.813 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 214
2018-06-13T14:09:38.813Z,1528898978.813 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:09:38.815Z,1528898978.815 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:38.815Z,1528898978.815 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 214
2018-06-13T14:09:38.815Z,1528898978.815 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:09:38.889Z,1528898978.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:09:38.889Z,1528898978.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:09:38.890Z,1528898978.890 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:09:40.681Z,1528898980.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:40.793Z,1528898980.793 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:09:40.793Z,1528898980.793 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 214
2018-06-13T14:09:40.793Z,1528898980.793 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:09:40.793Z,1528898980.793 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 214
2018-06-13T14:09:40.794Z,1528898980.794 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:09:40.794Z,1528898980.794 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 214
2018-06-13T14:09:40.820Z,1528898980.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:40.861Z,1528898980.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:09:40.862Z,1528898980.862 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:09:40.862Z,1528898980.862 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:09:40.863Z,1528898980.863 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:09:40.863Z,1528898980.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:09:40.863Z,1528898980.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:09:40.864Z,1528898980.864 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:09:40.864Z,1528898980.864 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:09:40.864Z,1528898980.864 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:09:43.982Z,1528898983.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:43.999Z,1528898983.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:09:44.000Z,1528898984.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:44.135Z,1528898984.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:44.183Z,1528898984.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T14:09:44.184Z,1528898984.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:44.564Z,1528898984.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:44.582Z,1528898984.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T14:09:44.583Z,1528898984.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:44.957Z,1528898984.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:44.982Z,1528898984.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T14:09:44.983Z,1528898984.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:45.350Z,1528898985.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:45.383Z,1528898985.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T14:09:45.384Z,1528898985.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:45.745Z,1528898985.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:45.773Z,1528898985.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T14:09:45.774Z,1528898985.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:48.970Z,1528898988.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:48.988Z,1528898988.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T14:09:48.989Z,1528898988.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:49.073Z,1528898989.073 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0249.lzma
2018-06-13T14:09:49.094Z,1528898989.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:49.137Z,1528898989.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T14:09:49.138Z,1528898989.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:49.518Z,1528898989.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:49.544Z,1528898989.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T14:09:49.545Z,1528898989.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:49.874Z,1528898989.874 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0249.lzma.bak
2018-06-13T14:09:49.874Z,1528898989.874 [DataOverHttps](INFO): SBD MOMSN=8329355
2018-06-13T14:09:49.933Z,1528898989.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:49.975Z,1528898989.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:09:49.976Z,1528898989.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:51.870Z,1528898991.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:51.888Z,1528898991.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-06-13T14:09:51.889Z,1528898991.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:51.892Z,1528898991.892 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T14:09:51.892Z,1528898991.892 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T14:09:51.892Z,1528898991.892 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T14:09:51.991Z,1528898991.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:52.008Z,1528898992.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:09:52.009Z,1528898992.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:52.399Z,1528898992.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:52.433Z,1528898992.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:09:52.434Z,1528898992.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:52.800Z,1528898992.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:52.818Z,1528898992.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:09:52.819Z,1528898992.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:53.198Z,1528898993.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:53.216Z,1528898993.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:09:53.216Z,1528898993.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:56.313Z,1528898996.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:56.348Z,1528898996.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T14:09:56.349Z,1528898996.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:56.469Z,1528898996.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:56.504Z,1528898996.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T14:09:56.509Z,1528898996.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:56.873Z,1528898996.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:56.900Z,1528898996.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T14:09:56.901Z,1528898996.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:57.266Z,1528898997.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:57.300Z,1528898997.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T14:09:57.301Z,1528898997.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:57.664Z,1528898997.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:57.681Z,1528898997.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T14:09:57.682Z,1528898997.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:58.063Z,1528898998.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:58.080Z,1528898998.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T14:09:58.081Z,1528898998.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:58.473Z,1528898998.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:58.507Z,1528898998.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T14:09:58.508Z,1528898998.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:58.873Z,1528898998.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:58.891Z,1528898998.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:59.277Z,1528898999.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:59.311Z,1528898999.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:09:59.663Z,1528898999.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:09:59.681Z,1528898999.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:00.059Z,1528899000.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:00.091Z,1528899000.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:00.465Z,1528899000.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:00.483Z,1528899000.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:00.864Z,1528899000.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:00.891Z,1528899000.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:01.271Z,1528899001.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:01.288Z,1528899001.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:01.673Z,1528899001.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:01.696Z,1528899001.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:02.073Z,1528899002.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:02.091Z,1528899002.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:02.458Z,1528899002.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:02.483Z,1528899002.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:02.859Z,1528899002.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:02.893Z,1528899002.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:03.273Z,1528899003.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:03.292Z,1528899003.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:03.671Z,1528899003.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:03.696Z,1528899003.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:04.073Z,1528899004.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:04.091Z,1528899004.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:04.467Z,1528899004.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:04.485Z,1528899004.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:04.859Z,1528899004.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:04.890Z,1528899004.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:05.274Z,1528899005.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:05.292Z,1528899005.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:05.676Z,1528899005.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:05.694Z,1528899005.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:06.074Z,1528899006.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:06.092Z,1528899006.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:06.463Z,1528899006.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:06.486Z,1528899006.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:06.863Z,1528899006.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:06.889Z,1528899006.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:07.271Z,1528899007.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:07.289Z,1528899007.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:07.674Z,1528899007.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:07.693Z,1528899007.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:08.074Z,1528899008.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:08.092Z,1528899008.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:08.460Z,1528899008.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:08.486Z,1528899008.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:08.863Z,1528899008.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:08.886Z,1528899008.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:09.274Z,1528899009.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:09.293Z,1528899009.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:09.674Z,1528899009.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:09.691Z,1528899009.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:10.074Z,1528899010.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:10.096Z,1528899010.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:10.467Z,1528899010.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:10.486Z,1528899010.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:10.865Z,1528899010.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:10.883Z,1528899010.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:11.274Z,1528899011.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:11.292Z,1528899011.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:11.673Z,1528899011.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:11.696Z,1528899011.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:12.071Z,1528899012.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:12.089Z,1528899012.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:12.463Z,1528899012.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:12.486Z,1528899012.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:12.863Z,1528899012.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:12.888Z,1528899012.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:13.278Z,1528899013.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:13.295Z,1528899013.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:13.675Z,1528899013.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:13.692Z,1528899013.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:14.075Z,1528899014.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:14.093Z,1528899014.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:14.458Z,1528899014.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:14.491Z,1528899014.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:14.863Z,1528899014.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:14.887Z,1528899014.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:15.277Z,1528899015.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:15.295Z,1528899015.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:15.674Z,1528899015.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:15.696Z,1528899015.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:16.075Z,1528899016.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:16.093Z,1528899016.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:16.464Z,1528899016.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:16.495Z,1528899016.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:16.856Z,1528899016.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:16.896Z,1528899016.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:17.275Z,1528899017.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:17.305Z,1528899017.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:17.676Z,1528899017.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:17.695Z,1528899017.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:18.077Z,1528899018.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:18.095Z,1528899018.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:18.460Z,1528899018.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:18.488Z,1528899018.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:18.859Z,1528899018.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:18.888Z,1528899018.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:19.270Z,1528899019.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:19.301Z,1528899019.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:19.676Z,1528899019.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:19.694Z,1528899019.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:20.077Z,1528899020.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:20.096Z,1528899020.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:20.460Z,1528899020.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:20.490Z,1528899020.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:20.859Z,1528899020.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:20.896Z,1528899020.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:21.281Z,1528899021.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:21.299Z,1528899021.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:21.675Z,1528899021.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:21.701Z,1528899021.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:22.074Z,1528899022.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:22.098Z,1528899022.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:22.460Z,1528899022.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:22.492Z,1528899022.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:22.859Z,1528899022.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:22.891Z,1528899022.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:23.276Z,1528899023.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:23.300Z,1528899023.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:23.680Z,1528899023.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:23.697Z,1528899023.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:24.065Z,1528899024.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:24.102Z,1528899024.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:24.459Z,1528899024.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:24.489Z,1528899024.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:24.860Z,1528899024.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:24.903Z,1528899024.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:25.259Z,1528899025.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:25.293Z,1528899025.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:25.669Z,1528899025.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:25.703Z,1528899025.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:26.073Z,1528899026.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:26.102Z,1528899026.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:26.469Z,1528899026.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:26.503Z,1528899026.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:26.860Z,1528899026.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:26.878Z,1528899026.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:27.262Z,1528899027.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:27.279Z,1528899027.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:27.659Z,1528899027.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:27.677Z,1528899027.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:28.059Z,1528899028.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:28.093Z,1528899028.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:28.469Z,1528899028.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:28.495Z,1528899028.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:28.869Z,1528899028.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:28.910Z,1528899028.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:29.273Z,1528899029.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:29.307Z,1528899029.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:29.662Z,1528899029.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:29.680Z,1528899029.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:30.060Z,1528899030.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:30.078Z,1528899030.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:30.462Z,1528899030.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:30.480Z,1528899030.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:30.861Z,1528899030.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:30.884Z,1528899030.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:31.262Z,1528899031.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:31.280Z,1528899031.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:31.665Z,1528899031.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:31.683Z,1528899031.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:32.073Z,1528899032.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:32.090Z,1528899032.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:32.466Z,1528899032.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:32.483Z,1528899032.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:32.862Z,1528899032.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:32.880Z,1528899032.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:33.262Z,1528899033.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:33.280Z,1528899033.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:33.666Z,1528899033.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:33.683Z,1528899033.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:34.064Z,1528899034.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:34.081Z,1528899034.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:34.469Z,1528899034.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:34.487Z,1528899034.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:34.873Z,1528899034.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:34.891Z,1528899034.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:35.270Z,1528899035.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:35.287Z,1528899035.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:35.664Z,1528899035.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:35.683Z,1528899035.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:36.064Z,1528899036.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:36.082Z,1528899036.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:36.462Z,1528899036.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:36.559Z,1528899036.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:36.863Z,1528899036.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:36.917Z,1528899036.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:37.287Z,1528899037.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:37.400Z,1528899037.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:37.672Z,1528899037.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:37.790Z,1528899037.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:38.080Z,1528899038.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:38.169Z,1528899038.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:38.476Z,1528899038.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:38.494Z,1528899038.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:38.863Z,1528899038.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:38.886Z,1528899038.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:39.267Z,1528899039.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:39.284Z,1528899039.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:39.666Z,1528899039.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:39.684Z,1528899039.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:40.063Z,1528899040.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:40.092Z,1528899040.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:40.483Z,1528899040.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:40.501Z,1528899040.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:40.879Z,1528899040.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:40.904Z,1528899040.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:41.276Z,1528899041.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:41.295Z,1528899041.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:41.660Z,1528899041.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:41.687Z,1528899041.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:42.060Z,1528899042.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:42.092Z,1528899042.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:42.459Z,1528899042.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:42.495Z,1528899042.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:42.871Z,1528899042.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:42.889Z,1528899042.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:43.260Z,1528899043.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:43.291Z,1528899043.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:43.676Z,1528899043.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:43.694Z,1528899043.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:44.081Z,1528899044.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:44.104Z,1528899044.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:44.479Z,1528899044.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:44.504Z,1528899044.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:44.859Z,1528899044.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:44.896Z,1528899044.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:45.259Z,1528899045.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:45.287Z,1528899045.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:45.660Z,1528899045.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:45.687Z,1528899045.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:46.070Z,1528899046.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:46.088Z,1528899046.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:46.479Z,1528899046.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:46.497Z,1528899046.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:46.879Z,1528899046.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:46.897Z,1528899046.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:47.275Z,1528899047.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:47.293Z,1528899047.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:47.660Z,1528899047.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:47.688Z,1528899047.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:48.059Z,1528899048.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:48.092Z,1528899048.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:48.459Z,1528899048.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:48.486Z,1528899048.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:48.861Z,1528899048.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:48.896Z,1528899048.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:49.263Z,1528899049.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:49.290Z,1528899049.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:49.680Z,1528899049.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:49.697Z,1528899049.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:50.080Z,1528899050.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:50.097Z,1528899050.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:50.479Z,1528899050.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:50.497Z,1528899050.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:50.872Z,1528899050.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:50.890Z,1528899050.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:51.259Z,1528899051.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:51.288Z,1528899051.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:51.660Z,1528899051.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:51.698Z,1528899051.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:52.063Z,1528899052.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:52.090Z,1528899052.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:52.485Z,1528899052.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:52.503Z,1528899052.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:55.590Z,1528899055.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:55.608Z,1528899055.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:55.758Z,1528899055.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:55.791Z,1528899055.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:56.146Z,1528899056.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:56.165Z,1528899056.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:56.550Z,1528899056.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:56.567Z,1528899056.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:56.948Z,1528899056.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:56.966Z,1528899056.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:57.354Z,1528899057.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:57.371Z,1528899057.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:57.754Z,1528899057.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:57.771Z,1528899057.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:58.150Z,1528899058.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:58.172Z,1528899058.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:58.547Z,1528899058.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:58.565Z,1528899058.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:58.946Z,1528899058.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:58.968Z,1528899058.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:59.349Z,1528899059.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:59.367Z,1528899059.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:10:59.754Z,1528899059.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:10:59.771Z,1528899059.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:00.154Z,1528899060.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:00.172Z,1528899060.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:00.546Z,1528899060.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:00.564Z,1528899060.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:00.946Z,1528899060.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:00.965Z,1528899060.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:01.354Z,1528899061.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:01.372Z,1528899061.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:01.757Z,1528899061.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:01.795Z,1528899061.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:02.158Z,1528899062.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:02.175Z,1528899062.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:02.547Z,1528899062.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:02.565Z,1528899062.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:02.943Z,1528899062.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:02.975Z,1528899062.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:03.354Z,1528899063.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:03.372Z,1528899063.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:03.751Z,1528899063.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:03.773Z,1528899063.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:04.148Z,1528899064.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:04.175Z,1528899064.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:04.546Z,1528899064.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:04.580Z,1528899064.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:04.939Z,1528899064.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:04.963Z,1528899064.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:05.354Z,1528899065.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:05.373Z,1528899065.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:05.755Z,1528899065.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:05.780Z,1528899065.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:06.154Z,1528899066.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:06.180Z,1528899066.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:06.550Z,1528899066.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:06.569Z,1528899066.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:06.946Z,1528899066.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:06.964Z,1528899066.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:07.351Z,1528899067.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:07.370Z,1528899067.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:07.754Z,1528899067.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:07.777Z,1528899067.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:08.154Z,1528899068.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:08.181Z,1528899068.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:08.547Z,1528899068.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:08.565Z,1528899068.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:08.943Z,1528899068.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:08.966Z,1528899068.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:09.355Z,1528899069.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:09.380Z,1528899069.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:09.754Z,1528899069.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:09.776Z,1528899069.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:10.154Z,1528899070.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:10.180Z,1528899070.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:10.546Z,1528899070.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:10.572Z,1528899070.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:10.945Z,1528899070.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:10.963Z,1528899070.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:11.353Z,1528899071.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:11.376Z,1528899071.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:11.754Z,1528899071.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:11.780Z,1528899071.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:12.151Z,1528899072.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:12.169Z,1528899072.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:12.543Z,1528899072.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:12.573Z,1528899072.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:12.939Z,1528899072.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:12.980Z,1528899072.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:13.352Z,1528899073.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:13.376Z,1528899073.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:13.759Z,1528899073.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:13.777Z,1528899073.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:14.160Z,1528899074.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:14.184Z,1528899074.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:14.539Z,1528899074.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:14.572Z,1528899074.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:14.940Z,1528899074.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:14.975Z,1528899074.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:15.339Z,1528899075.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:15.370Z,1528899075.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:15.755Z,1528899075.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:15.780Z,1528899075.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:16.159Z,1528899076.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:16.177Z,1528899076.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:16.559Z,1528899076.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:16.584Z,1528899076.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:16.935Z,1528899076.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:16.962Z,1528899076.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:17.339Z,1528899077.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:17.372Z,1528899077.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:17.740Z,1528899077.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:17.769Z,1528899077.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:18.140Z,1528899078.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:18.167Z,1528899078.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:18.555Z,1528899078.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:18.580Z,1528899078.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:18.960Z,1528899078.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:18.978Z,1528899078.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:19.349Z,1528899079.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:19.376Z,1528899079.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:19.739Z,1528899079.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:19.768Z,1528899079.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:20.140Z,1528899080.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:20.170Z,1528899080.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:20.539Z,1528899080.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:20.566Z,1528899080.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:20.940Z,1528899080.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:20.967Z,1528899080.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:21.339Z,1528899081.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:21.369Z,1528899081.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:21.756Z,1528899081.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:21.774Z,1528899081.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:22.161Z,1528899082.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:22.178Z,1528899082.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:22.561Z,1528899082.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:22.579Z,1528899082.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:22.943Z,1528899082.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:22.976Z,1528899082.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:23.343Z,1528899083.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:23.376Z,1528899083.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:23.740Z,1528899083.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:23.771Z,1528899083.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:24.135Z,1528899084.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:24.169Z,1528899084.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:24.549Z,1528899084.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:24.584Z,1528899084.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:24.962Z,1528899084.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:24.980Z,1528899084.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:25.346Z,1528899085.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:25.379Z,1528899085.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:25.739Z,1528899085.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:25.781Z,1528899085.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:26.139Z,1528899086.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:26.170Z,1528899086.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:26.539Z,1528899086.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:26.579Z,1528899086.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:26.939Z,1528899086.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:26.975Z,1528899086.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:27.339Z,1528899087.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:27.358Z,1528899087.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:27.749Z,1528899087.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:27.784Z,1528899087.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:28.153Z,1528899088.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:28.191Z,1528899088.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:28.553Z,1528899088.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:28.572Z,1528899088.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:28.944Z,1528899088.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:28.961Z,1528899088.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:29.344Z,1528899089.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:29.361Z,1528899089.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:29.746Z,1528899089.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:29.764Z,1528899089.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:30.144Z,1528899090.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:30.162Z,1528899090.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:30.557Z,1528899090.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:30.575Z,1528899090.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:30.953Z,1528899090.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:30.971Z,1528899090.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:31.350Z,1528899091.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:31.368Z,1528899091.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:31.745Z,1528899091.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:31.763Z,1528899091.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:32.143Z,1528899092.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:32.169Z,1528899092.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:32.545Z,1528899092.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:32.563Z,1528899092.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:32.943Z,1528899092.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:32.967Z,1528899092.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:33.343Z,1528899093.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:33.368Z,1528899093.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:33.751Z,1528899093.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:33.769Z,1528899093.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:34.157Z,1528899094.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:34.175Z,1528899094.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:34.557Z,1528899094.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:34.576Z,1528899094.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:34.945Z,1528899094.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:34.963Z,1528899094.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:35.343Z,1528899095.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:35.365Z,1528899095.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:35.750Z,1528899095.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:35.768Z,1528899095.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:36.139Z,1528899096.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:36.162Z,1528899096.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:36.554Z,1528899096.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:36.572Z,1528899096.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:36.954Z,1528899096.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:36.980Z,1528899096.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:37.354Z,1528899097.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:37.372Z,1528899097.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:37.743Z,1528899097.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:37.774Z,1528899097.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:38.146Z,1528899098.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:38.164Z,1528899098.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:38.539Z,1528899098.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:38.564Z,1528899098.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:38.950Z,1528899098.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:38.968Z,1528899098.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:39.346Z,1528899099.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:39.368Z,1528899099.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:39.752Z,1528899099.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:39.770Z,1528899099.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:40.154Z,1528899100.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:40.176Z,1528899100.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:40.557Z,1528899100.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:40.580Z,1528899100.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:40.947Z,1528899100.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:40.965Z,1528899100.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:41.347Z,1528899101.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:41.365Z,1528899101.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:41.744Z,1528899101.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:41.775Z,1528899101.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:42.152Z,1528899102.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:42.170Z,1528899102.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:42.559Z,1528899102.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:42.577Z,1528899102.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:42.961Z,1528899102.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:42.980Z,1528899102.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:43.355Z,1528899103.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:43.372Z,1528899103.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:43.746Z,1528899103.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:43.776Z,1528899103.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:44.143Z,1528899104.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:44.174Z,1528899104.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:44.539Z,1528899104.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:44.567Z,1528899104.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:44.940Z,1528899104.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:44.976Z,1528899104.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:45.343Z,1528899105.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:45.374Z,1528899105.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:45.759Z,1528899105.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:45.778Z,1528899105.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:46.163Z,1528899106.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:46.181Z,1528899106.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:46.560Z,1528899106.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:46.579Z,1528899106.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:46.942Z,1528899106.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:46.969Z,1528899106.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:47.340Z,1528899107.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:47.369Z,1528899107.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:47.743Z,1528899107.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:47.771Z,1528899107.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:48.136Z,1528899108.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:48.174Z,1528899108.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:48.550Z,1528899108.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:48.583Z,1528899108.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:48.963Z,1528899108.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:48.988Z,1528899108.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:49.359Z,1528899109.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:49.377Z,1528899109.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:49.739Z,1528899109.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:49.769Z,1528899109.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:50.141Z,1528899110.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:50.176Z,1528899110.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:50.542Z,1528899110.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:50.560Z,1528899110.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:50.948Z,1528899110.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:50.981Z,1528899110.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:51.342Z,1528899111.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:51.360Z,1528899111.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:51.755Z,1528899111.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:51.791Z,1528899111.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:52.157Z,1528899112.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:52.191Z,1528899112.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:52.557Z,1528899112.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:52.592Z,1528899112.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:55.647Z,1528899115.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:55.666Z,1528899115.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:55.800Z,1528899115.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:55.818Z,1528899115.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:56.209Z,1528899116.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:56.249Z,1528899116.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:56.602Z,1528899116.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:56.620Z,1528899116.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:57.006Z,1528899117.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:57.024Z,1528899117.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:57.394Z,1528899117.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:57.412Z,1528899117.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:57.787Z,1528899117.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:57.811Z,1528899117.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:58.191Z,1528899118.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:58.223Z,1528899118.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:58.602Z,1528899118.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:58.620Z,1528899118.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:59.002Z,1528899119.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:59.020Z,1528899119.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:59.399Z,1528899119.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:59.416Z,1528899119.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:11:59.794Z,1528899119.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:11:59.812Z,1528899119.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:00.193Z,1528899120.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:00.212Z,1528899120.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:00.591Z,1528899120.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:00.623Z,1528899120.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:00.994Z,1528899120.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:01.020Z,1528899121.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:01.393Z,1528899121.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:01.412Z,1528899121.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:01.799Z,1528899121.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:01.817Z,1528899121.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:02.204Z,1528899122.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:02.227Z,1528899122.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:02.603Z,1528899122.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:02.628Z,1528899122.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:02.993Z,1528899122.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:03.011Z,1528899123.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:03.391Z,1528899123.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:03.417Z,1528899123.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:03.795Z,1528899123.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:03.813Z,1528899123.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:04.191Z,1528899124.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:04.215Z,1528899124.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:04.606Z,1528899124.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:04.648Z,1528899124.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:05.003Z,1528899125.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:05.024Z,1528899125.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:05.403Z,1528899125.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:05.421Z,1528899125.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:05.794Z,1528899125.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:05.829Z,1528899125.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:06.198Z,1528899126.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:06.216Z,1528899126.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:06.587Z,1528899126.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:06.621Z,1528899126.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:06.988Z,1528899126.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:07.019Z,1528899127.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:07.383Z,1528899127.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:07.420Z,1528899127.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:07.813Z,1528899127.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:07.831Z,1528899127.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:08.212Z,1528899128.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:08.230Z,1528899128.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:08.613Z,1528899128.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:08.631Z,1528899128.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:08.987Z,1528899128.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:09.024Z,1528899129.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:09.392Z,1528899129.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:09.421Z,1528899129.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:09.788Z,1528899129.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:09.825Z,1528899129.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:10.187Z,1528899130.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:10.225Z,1528899130.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:10.610Z,1528899130.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:10.628Z,1528899130.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:11.013Z,1528899131.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:11.031Z,1528899131.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:11.405Z,1528899131.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:11.427Z,1528899131.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:11.787Z,1528899131.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:11.818Z,1528899131.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:12.183Z,1528899132.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:12.221Z,1528899132.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:12.590Z,1528899132.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:12.620Z,1528899132.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:12.992Z,1528899132.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:13.021Z,1528899133.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:13.387Z,1528899133.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:13.416Z,1528899133.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:13.805Z,1528899133.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:13.823Z,1528899133.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:14.211Z,1528899134.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:14.235Z,1528899134.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:14.612Z,1528899134.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:14.636Z,1528899134.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:14.987Z,1528899134.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:15.023Z,1528899135.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:15.388Z,1528899135.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:15.426Z,1528899135.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:15.791Z,1528899135.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:15.827Z,1528899135.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:16.191Z,1528899136.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:16.219Z,1528899136.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:16.609Z,1528899136.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:16.627Z,1528899136.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:17.004Z,1528899137.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:17.022Z,1528899137.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:17.410Z,1528899137.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:17.428Z,1528899137.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:17.791Z,1528899137.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:17.821Z,1528899137.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:18.191Z,1528899138.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:18.220Z,1528899138.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:18.587Z,1528899138.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:18.623Z,1528899138.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:18.990Z,1528899138.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:19.019Z,1528899139.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:19.390Z,1528899139.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:19.419Z,1528899139.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:19.812Z,1528899139.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:19.830Z,1528899139.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:20.212Z,1528899140.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:20.231Z,1528899140.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:20.605Z,1528899140.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:20.623Z,1528899140.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:20.990Z,1528899140.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:21.019Z,1528899141.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:21.389Z,1528899141.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:21.432Z,1528899141.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:21.788Z,1528899141.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:21.816Z,1528899141.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:22.190Z,1528899142.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:22.232Z,1528899142.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:22.606Z,1528899142.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:22.624Z,1528899142.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:23.009Z,1528899143.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:23.027Z,1528899143.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:23.402Z,1528899143.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:23.427Z,1528899143.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:23.791Z,1528899143.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:23.832Z,1528899143.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:24.186Z,1528899144.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:24.229Z,1528899144.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:24.592Z,1528899144.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:24.633Z,1528899144.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:24.988Z,1528899144.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:25.023Z,1528899145.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:25.384Z,1528899145.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:25.407Z,1528899145.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:25.807Z,1528899145.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:25.836Z,1528899145.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:26.206Z,1528899146.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:26.236Z,1528899146.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:26.606Z,1528899146.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:26.640Z,1528899146.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:26.994Z,1528899146.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:27.038Z,1528899147.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:27.393Z,1528899147.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:27.412Z,1528899147.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:27.794Z,1528899147.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:27.842Z,1528899147.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:28.197Z,1528899148.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:28.215Z,1528899148.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:28.605Z,1528899148.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:28.623Z,1528899148.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:29.006Z,1528899149.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:29.023Z,1528899149.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:29.402Z,1528899149.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:29.420Z,1528899149.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:29.795Z,1528899149.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:29.813Z,1528899149.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:30.187Z,1528899150.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:30.218Z,1528899150.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:30.594Z,1528899150.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:30.621Z,1528899150.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:30.997Z,1528899150.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:31.015Z,1528899151.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:31.395Z,1528899151.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:31.420Z,1528899151.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:31.807Z,1528899151.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:31.825Z,1528899151.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:32.208Z,1528899152.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:32.226Z,1528899152.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:32.600Z,1528899152.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:32.628Z,1528899152.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:32.998Z,1528899152.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:33.016Z,1528899153.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:33.393Z,1528899153.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:33.416Z,1528899153.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:33.783Z,1528899153.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:33.826Z,1528899153.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:34.194Z,1528899154.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:34.220Z,1528899154.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:34.605Z,1528899154.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:34.623Z,1528899154.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:35.006Z,1528899155.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:35.025Z,1528899155.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:35.408Z,1528899155.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:35.426Z,1528899155.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:35.788Z,1528899155.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:35.819Z,1528899155.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:36.185Z,1528899156.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:36.214Z,1528899156.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:36.591Z,1528899156.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:36.624Z,1528899156.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:36.984Z,1528899156.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:37.017Z,1528899157.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:37.389Z,1528899157.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:37.436Z,1528899157.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:37.802Z,1528899157.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:37.826Z,1528899157.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:38.211Z,1528899158.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:38.229Z,1528899158.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:38.599Z,1528899158.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:38.628Z,1528899158.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:38.988Z,1528899158.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:39.019Z,1528899159.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:39.385Z,1528899159.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:39.420Z,1528899159.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:39.787Z,1528899159.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:39.832Z,1528899159.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:40.187Z,1528899160.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:40.232Z,1528899160.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:40.609Z,1528899160.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:40.637Z,1528899160.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:41.003Z,1528899161.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:41.027Z,1528899161.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:41.027Z,1528899161.027 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 215
2018-06-13T14:12:41.027Z,1528899161.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:12:41.029Z,1528899161.029 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:41.029Z,1528899161.029 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 215
2018-06-13T14:12:41.029Z,1528899161.029 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:12:41.031Z,1528899161.031 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:41.031Z,1528899161.031 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 215
2018-06-13T14:12:41.031Z,1528899161.031 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:12:41.101Z,1528899161.101 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:12:41.101Z,1528899161.101 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:12:41.102Z,1528899161.102 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:12:41.406Z,1528899161.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:41.505Z,1528899161.505 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:12:41.505Z,1528899161.505 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 215
2018-06-13T14:12:41.506Z,1528899161.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:12:41.506Z,1528899161.506 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 215
2018-06-13T14:12:41.506Z,1528899161.506 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:12:41.506Z,1528899161.506 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 215
2018-06-13T14:12:41.783Z,1528899161.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:41.827Z,1528899161.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:12:41.828Z,1528899161.828 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:12:41.828Z,1528899161.828 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:12:41.829Z,1528899161.829 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:12:41.829Z,1528899161.829 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:12:41.829Z,1528899161.829 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:12:41.830Z,1528899161.830 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:12:41.830Z,1528899161.830 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:12:41.830Z,1528899161.830 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:12:42.183Z,1528899162.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:42.222Z,1528899162.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:12:42.223Z,1528899162.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:42.590Z,1528899162.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:42.608Z,1528899162.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:12:42.622Z,1528899162.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:42.991Z,1528899162.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:43.036Z,1528899163.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:12:43.036Z,1528899163.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:43.391Z,1528899163.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:43.435Z,1528899163.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:12:43.435Z,1528899163.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:43.804Z,1528899163.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:43.838Z,1528899163.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:12:43.839Z,1528899163.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:44.207Z,1528899164.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:44.238Z,1528899164.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:12:44.239Z,1528899164.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:44.602Z,1528899164.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:44.648Z,1528899164.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:12:44.649Z,1528899164.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:44.990Z,1528899164.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:45.014Z,1528899165.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:12:45.014Z,1528899165.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:45.388Z,1528899165.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:45.427Z,1528899165.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:12:45.428Z,1528899165.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:45.795Z,1528899165.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:45.828Z,1528899165.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:12:45.833Z,1528899165.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:46.194Z,1528899166.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:46.239Z,1528899166.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:12:46.240Z,1528899166.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:46.599Z,1528899166.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:46.622Z,1528899166.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:12:46.623Z,1528899166.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:47.041Z,1528899167.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:47.064Z,1528899167.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:12:47.065Z,1528899167.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:47.401Z,1528899167.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:47.419Z,1528899167.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:12:47.420Z,1528899167.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:47.794Z,1528899167.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:47.837Z,1528899167.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:12:47.838Z,1528899167.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:48.194Z,1528899168.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:48.218Z,1528899168.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:12:48.219Z,1528899168.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:48.592Z,1528899168.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:48.616Z,1528899168.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:12:48.617Z,1528899168.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:48.998Z,1528899168.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:49.017Z,1528899169.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:12:49.017Z,1528899169.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:49.393Z,1528899169.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:49.443Z,1528899169.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:12:49.444Z,1528899169.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:49.799Z,1528899169.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:49.822Z,1528899169.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:12:49.823Z,1528899169.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:50.204Z,1528899170.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:50.247Z,1528899170.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:12:50.248Z,1528899170.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:50.604Z,1528899170.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:50.622Z,1528899170.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:12:50.623Z,1528899170.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:50.991Z,1528899170.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:51.043Z,1528899171.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:12:51.044Z,1528899171.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:51.394Z,1528899171.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:51.412Z,1528899171.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:12:51.413Z,1528899171.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:51.794Z,1528899171.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:51.817Z,1528899171.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:12:51.818Z,1528899171.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:52.195Z,1528899172.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:52.218Z,1528899172.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:12:52.219Z,1528899172.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:52.606Z,1528899172.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:52.648Z,1528899172.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:12:52.649Z,1528899172.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:55.718Z,1528899175.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:55.751Z,1528899175.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T14:12:55.752Z,1528899175.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:55.882Z,1528899175.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:55.905Z,1528899175.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T14:12:55.906Z,1528899175.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:56.264Z,1528899176.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:56.300Z,1528899176.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T14:12:56.301Z,1528899176.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:56.662Z,1528899176.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:56.696Z,1528899176.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T14:12:56.701Z,1528899176.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:57.060Z,1528899177.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:57.077Z,1528899177.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T14:12:57.078Z,1528899177.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:57.461Z,1528899177.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:57.489Z,1528899177.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T14:12:57.490Z,1528899177.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:57.870Z,1528899177.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:57.887Z,1528899177.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T14:12:57.888Z,1528899177.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:58.270Z,1528899178.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:58.312Z,1528899178.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T14:12:58.317Z,1528899178.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:58.669Z,1528899178.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:58.691Z,1528899178.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T14:12:58.692Z,1528899178.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:59.064Z,1528899179.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:59.081Z,1528899179.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T14:12:59.082Z,1528899179.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:59.463Z,1528899179.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:59.481Z,1528899179.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T14:12:59.482Z,1528899179.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:12:59.862Z,1528899179.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:12:59.879Z,1528899179.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T14:12:59.880Z,1528899179.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:00.261Z,1528899180.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:00.279Z,1528899180.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T14:13:00.280Z,1528899180.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:00.669Z,1528899180.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:00.692Z,1528899180.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T14:13:00.693Z,1528899180.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:01.081Z,1528899181.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:01.121Z,1528899181.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:01.466Z,1528899181.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:01.484Z,1528899181.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:01.859Z,1528899181.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:01.881Z,1528899181.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:02.263Z,1528899182.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:02.291Z,1528899182.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:02.664Z,1528899182.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:02.688Z,1528899182.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:03.066Z,1528899183.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:03.084Z,1528899183.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:03.462Z,1528899183.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:03.480Z,1528899183.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:03.870Z,1528899183.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:03.896Z,1528899183.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:04.274Z,1528899184.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:04.291Z,1528899184.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:04.674Z,1528899184.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:04.691Z,1528899184.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:05.060Z,1528899185.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:05.079Z,1528899185.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:05.460Z,1528899185.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:05.494Z,1528899185.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:05.870Z,1528899185.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:05.887Z,1528899185.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:06.264Z,1528899186.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:06.282Z,1528899186.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:06.665Z,1528899186.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:06.691Z,1528899186.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:07.071Z,1528899187.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:07.108Z,1528899187.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:07.470Z,1528899187.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:07.488Z,1528899187.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:07.865Z,1528899187.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:07.883Z,1528899187.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:08.261Z,1528899188.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:08.282Z,1528899188.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:08.652Z,1528899188.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:08.688Z,1528899188.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:09.063Z,1528899189.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:09.089Z,1528899189.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:09.460Z,1528899189.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:09.489Z,1528899189.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:09.874Z,1528899189.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:09.892Z,1528899189.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:10.276Z,1528899190.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:10.301Z,1528899190.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:10.674Z,1528899190.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:10.712Z,1528899190.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:11.058Z,1528899191.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:11.086Z,1528899191.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:11.459Z,1528899191.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:11.487Z,1528899191.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:11.857Z,1528899191.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:11.892Z,1528899191.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:12.254Z,1528899192.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:12.288Z,1528899192.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:12.676Z,1528899192.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:12.700Z,1528899192.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:13.080Z,1528899193.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:13.104Z,1528899193.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:13.474Z,1528899193.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:13.493Z,1528899193.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:13.857Z,1528899193.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:13.885Z,1528899193.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:14.258Z,1528899194.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:14.287Z,1528899194.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:14.656Z,1528899194.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:14.688Z,1528899194.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:15.055Z,1528899195.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:15.092Z,1528899195.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:15.456Z,1528899195.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:15.489Z,1528899195.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:15.866Z,1528899195.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:15.900Z,1528899195.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:16.279Z,1528899196.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:16.297Z,1528899196.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:16.679Z,1528899196.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:16.698Z,1528899196.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:17.051Z,1528899197.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:17.093Z,1528899197.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:17.457Z,1528899197.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:17.490Z,1528899197.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:17.859Z,1528899197.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:17.876Z,1528899197.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:18.259Z,1528899198.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:18.304Z,1528899198.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:18.671Z,1528899198.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:18.708Z,1528899198.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:19.043Z,1528899199.043 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T14:13:19.043Z,1528899199.043 [NAL9602] Data Fault, FailCount= 4
2018-06-13T14:13:19.043Z,1528899199.043 [NAL9602](ERROR): Data Fault
2018-06-13T14:13:19.062Z,1528899199.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:19.101Z,1528899199.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:19.177Z,1528899199.177 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T14:13:19.434Z,1528899199.434 [NAL9602](INFO): Powering down
2018-06-13T14:13:19.457Z,1528899199.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:19.491Z,1528899199.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:19.859Z,1528899199.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:19.910Z,1528899199.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:20.262Z,1528899200.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:20.293Z,1528899200.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:20.393Z,1528899200.393 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T14:13:20.393Z,1528899200.393 [NAL9602] No Fault, FailCount= 4
2018-06-13T14:13:20.660Z,1528899200.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:20.678Z,1528899200.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:21.064Z,1528899201.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:21.082Z,1528899201.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:21.460Z,1528899201.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:21.493Z,1528899201.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:21.856Z,1528899201.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:21.878Z,1528899201.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:22.263Z,1528899202.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:22.281Z,1528899202.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:22.665Z,1528899202.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:22.682Z,1528899202.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:23.056Z,1528899203.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:23.092Z,1528899203.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:23.460Z,1528899203.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:23.483Z,1528899203.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:23.863Z,1528899203.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:23.881Z,1528899203.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:24.265Z,1528899204.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:24.284Z,1528899204.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:24.659Z,1528899204.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:24.710Z,1528899204.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:25.065Z,1528899205.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:25.087Z,1528899205.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:25.456Z,1528899205.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:25.479Z,1528899205.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:25.861Z,1528899205.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:25.885Z,1528899205.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:26.260Z,1528899206.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:26.294Z,1528899206.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:26.656Z,1528899206.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:26.679Z,1528899206.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:27.064Z,1528899207.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:27.088Z,1528899207.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:27.465Z,1528899207.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:27.482Z,1528899207.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:27.857Z,1528899207.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:27.895Z,1528899207.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:28.259Z,1528899208.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:28.287Z,1528899208.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:28.660Z,1528899208.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:28.682Z,1528899208.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:29.060Z,1528899209.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:29.080Z,1528899209.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:29.459Z,1528899209.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:29.510Z,1528899209.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:29.864Z,1528899209.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:29.887Z,1528899209.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:30.261Z,1528899210.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:30.283Z,1528899210.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:30.662Z,1528899210.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:30.681Z,1528899210.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:31.061Z,1528899211.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:31.096Z,1528899211.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:31.456Z,1528899211.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:31.475Z,1528899211.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:31.862Z,1528899211.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:31.884Z,1528899211.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:32.262Z,1528899212.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:32.282Z,1528899212.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:32.656Z,1528899212.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:32.709Z,1528899212.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:33.061Z,1528899213.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:33.081Z,1528899213.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:33.460Z,1528899213.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:33.483Z,1528899213.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:33.857Z,1528899213.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:33.880Z,1528899213.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:34.258Z,1528899214.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:34.314Z,1528899214.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:34.664Z,1528899214.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:34.685Z,1528899214.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:35.056Z,1528899215.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:35.079Z,1528899215.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:35.458Z,1528899215.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:35.489Z,1528899215.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:35.860Z,1528899215.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:35.889Z,1528899215.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:36.260Z,1528899216.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:36.278Z,1528899216.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:36.658Z,1528899216.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:36.696Z,1528899216.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:37.060Z,1528899217.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:37.082Z,1528899217.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:37.450Z,1528899217.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:37.485Z,1528899217.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:37.854Z,1528899217.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:37.896Z,1528899217.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:38.255Z,1528899218.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:38.288Z,1528899218.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:38.650Z,1528899218.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:38.684Z,1528899218.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:39.053Z,1528899219.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:39.088Z,1528899219.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:39.454Z,1528899219.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:39.482Z,1528899219.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:39.850Z,1528899219.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:39.895Z,1528899219.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:40.253Z,1528899220.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:40.285Z,1528899220.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:40.654Z,1528899220.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:40.684Z,1528899220.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:41.050Z,1528899221.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:41.088Z,1528899221.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:41.455Z,1528899221.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:41.486Z,1528899221.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:41.854Z,1528899221.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:41.887Z,1528899221.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:42.254Z,1528899222.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:42.282Z,1528899222.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:42.655Z,1528899222.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:42.681Z,1528899222.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:43.054Z,1528899223.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:43.094Z,1528899223.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:43.450Z,1528899223.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:43.491Z,1528899223.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:43.854Z,1528899223.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:43.890Z,1528899223.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:44.254Z,1528899224.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:44.282Z,1528899224.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:44.650Z,1528899224.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:44.699Z,1528899224.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:45.054Z,1528899225.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:45.087Z,1528899225.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:45.454Z,1528899225.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:45.482Z,1528899225.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:45.850Z,1528899225.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:45.880Z,1528899225.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:46.252Z,1528899226.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:46.286Z,1528899226.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:46.651Z,1528899226.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:46.696Z,1528899226.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:47.051Z,1528899227.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:47.077Z,1528899227.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:47.455Z,1528899227.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:47.481Z,1528899227.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:47.851Z,1528899227.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:47.868Z,1528899227.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:48.255Z,1528899228.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:48.274Z,1528899228.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:48.654Z,1528899228.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:48.673Z,1528899228.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:49.058Z,1528899229.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:49.076Z,1528899229.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:49.438Z,1528899229.438 [NAL9602](INFO): Powering up NAL9602
2018-06-13T14:13:49.455Z,1528899229.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:49.473Z,1528899229.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:49.858Z,1528899229.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:49.876Z,1528899229.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:50.258Z,1528899230.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:50.276Z,1528899230.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:50.656Z,1528899230.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:50.674Z,1528899230.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:51.058Z,1528899231.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:51.076Z,1528899231.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:51.458Z,1528899231.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:51.476Z,1528899231.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:51.856Z,1528899231.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:51.874Z,1528899231.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:52.261Z,1528899232.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:52.279Z,1528899232.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:52.658Z,1528899232.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:52.676Z,1528899232.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:53.059Z,1528899233.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:53.076Z,1528899233.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:53.461Z,1528899233.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:53.479Z,1528899233.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:53.861Z,1528899233.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:53.884Z,1528899233.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:54.264Z,1528899234.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:54.282Z,1528899234.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:54.664Z,1528899234.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:54.688Z,1528899234.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:55.064Z,1528899235.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:55.083Z,1528899235.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:55.456Z,1528899235.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:55.474Z,1528899235.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:55.860Z,1528899235.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:55.884Z,1528899235.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:56.260Z,1528899236.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:56.279Z,1528899236.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:59.370Z,1528899239.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:59.389Z,1528899239.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:59.499Z,1528899239.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:59.535Z,1528899239.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:13:59.920Z,1528899239.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:13:59.969Z,1528899239.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:00.283Z,1528899240.283 [NAL9602](INFO): NAL9602 initialized
2018-06-13T14:14:00.299Z,1528899240.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:00.370Z,1528899240.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:00.695Z,1528899240.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:00.729Z,1528899240.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:01.116Z,1528899241.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:01.142Z,1528899241.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:01.500Z,1528899241.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:01.546Z,1528899241.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:01.895Z,1528899241.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:01.934Z,1528899241.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:02.295Z,1528899242.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:02.335Z,1528899242.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:02.691Z,1528899242.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:02.722Z,1528899242.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:03.105Z,1528899243.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:03.147Z,1528899243.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:03.514Z,1528899243.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:03.543Z,1528899243.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:03.901Z,1528899243.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:03.938Z,1528899243.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:04.296Z,1528899244.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:04.337Z,1528899244.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:04.696Z,1528899244.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:04.736Z,1528899244.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:05.101Z,1528899245.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:05.143Z,1528899245.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:05.508Z,1528899245.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:05.545Z,1528899245.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:05.906Z,1528899245.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:05.947Z,1528899245.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:06.294Z,1528899246.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:06.340Z,1528899246.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:06.696Z,1528899246.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:06.740Z,1528899246.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:07.110Z,1528899247.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:07.152Z,1528899247.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:07.505Z,1528899247.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:07.528Z,1528899247.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:07.909Z,1528899247.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:07.932Z,1528899247.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:08.303Z,1528899248.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:08.321Z,1528899248.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:08.697Z,1528899248.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:08.716Z,1528899248.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:09.109Z,1528899249.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:09.131Z,1528899249.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:09.510Z,1528899249.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:09.528Z,1528899249.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:09.906Z,1528899249.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:09.924Z,1528899249.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:10.303Z,1528899250.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:10.320Z,1528899250.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:10.701Z,1528899250.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:10.730Z,1528899250.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:11.106Z,1528899251.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:11.124Z,1528899251.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:11.510Z,1528899251.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:11.554Z,1528899251.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:11.910Z,1528899251.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:11.928Z,1528899251.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:12.302Z,1528899252.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:12.322Z,1528899252.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:12.703Z,1528899252.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:12.720Z,1528899252.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:13.099Z,1528899253.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:13.136Z,1528899253.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:13.508Z,1528899253.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:13.526Z,1528899253.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:13.910Z,1528899253.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:13.932Z,1528899253.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:14.307Z,1528899254.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:14.325Z,1528899254.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:14.696Z,1528899254.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:14.715Z,1528899254.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:15.102Z,1528899255.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:15.120Z,1528899255.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:15.499Z,1528899255.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:15.539Z,1528899255.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:15.891Z,1528899255.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:15.928Z,1528899255.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:16.320Z,1528899256.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:16.344Z,1528899256.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:16.715Z,1528899256.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:16.734Z,1528899256.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:17.106Z,1528899257.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:17.124Z,1528899257.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:17.491Z,1528899257.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:17.524Z,1528899257.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:17.895Z,1528899257.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:17.928Z,1528899257.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:18.296Z,1528899258.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:18.324Z,1528899258.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:18.695Z,1528899258.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:18.722Z,1528899258.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:19.115Z,1528899259.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:19.133Z,1528899259.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:19.511Z,1528899259.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:19.529Z,1528899259.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:19.901Z,1528899259.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:19.936Z,1528899259.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:20.295Z,1528899260.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:20.336Z,1528899260.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:20.691Z,1528899260.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:20.722Z,1528899260.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:21.095Z,1528899261.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:21.134Z,1528899261.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:21.516Z,1528899261.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:21.534Z,1528899261.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:21.905Z,1528899261.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:21.950Z,1528899261.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:22.309Z,1528899262.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:22.337Z,1528899262.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:22.695Z,1528899262.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:22.729Z,1528899262.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:23.095Z,1528899263.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:23.113Z,1528899263.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:23.496Z,1528899263.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:23.534Z,1528899263.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:23.898Z,1528899263.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:23.916Z,1528899263.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:24.305Z,1528899264.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:24.323Z,1528899264.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:24.709Z,1528899264.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:24.726Z,1528899264.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:25.111Z,1528899265.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:25.128Z,1528899265.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:25.496Z,1528899265.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:25.515Z,1528899265.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:25.901Z,1528899265.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:25.919Z,1528899265.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:26.300Z,1528899266.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:26.319Z,1528899266.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:26.697Z,1528899266.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:26.715Z,1528899266.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:27.103Z,1528899267.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:27.121Z,1528899267.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:27.510Z,1528899267.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:27.528Z,1528899267.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:27.909Z,1528899267.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:27.927Z,1528899267.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:28.309Z,1528899268.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:28.332Z,1528899268.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:28.702Z,1528899268.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:28.724Z,1528899268.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:29.097Z,1528899269.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:29.115Z,1528899269.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:29.503Z,1528899269.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:29.528Z,1528899269.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:29.905Z,1528899269.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:29.923Z,1528899269.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:30.309Z,1528899270.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:30.327Z,1528899270.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:30.709Z,1528899270.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:30.727Z,1528899270.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:31.106Z,1528899271.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:31.144Z,1528899271.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:31.501Z,1528899271.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:31.520Z,1528899271.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:31.904Z,1528899271.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:31.922Z,1528899271.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:32.295Z,1528899272.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:32.325Z,1528899272.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:32.703Z,1528899272.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:32.721Z,1528899272.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:33.099Z,1528899273.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:33.117Z,1528899273.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:33.512Z,1528899273.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:33.530Z,1528899273.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:33.914Z,1528899273.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:33.932Z,1528899273.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:34.316Z,1528899274.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:34.334Z,1528899274.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:34.691Z,1528899274.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:34.720Z,1528899274.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:35.095Z,1528899275.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:35.122Z,1528899275.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:35.496Z,1528899275.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:35.528Z,1528899275.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:35.891Z,1528899275.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:35.919Z,1528899275.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:36.311Z,1528899276.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:36.329Z,1528899276.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:36.711Z,1528899276.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:36.733Z,1528899276.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:37.107Z,1528899277.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:37.132Z,1528899277.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:37.495Z,1528899277.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:37.523Z,1528899277.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:37.895Z,1528899277.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:37.922Z,1528899277.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:38.291Z,1528899278.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:38.328Z,1528899278.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:38.695Z,1528899278.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:38.723Z,1528899278.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:39.091Z,1528899279.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:39.127Z,1528899279.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:39.510Z,1528899279.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:39.536Z,1528899279.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:39.905Z,1528899279.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:39.933Z,1528899279.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:40.305Z,1528899280.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:40.340Z,1528899280.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:40.691Z,1528899280.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:40.709Z,1528899280.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:41.095Z,1528899281.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:41.112Z,1528899281.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:41.499Z,1528899281.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:41.518Z,1528899281.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:41.895Z,1528899281.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:41.913Z,1528899281.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:42.309Z,1528899282.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:42.344Z,1528899282.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:42.712Z,1528899282.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:42.743Z,1528899282.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:43.111Z,1528899283.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:43.129Z,1528899283.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:43.501Z,1528899283.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:43.519Z,1528899283.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:43.902Z,1528899283.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:43.919Z,1528899283.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:44.292Z,1528899284.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:44.320Z,1528899284.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:44.701Z,1528899284.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:44.719Z,1528899284.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:45.102Z,1528899285.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:45.120Z,1528899285.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:45.507Z,1528899285.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:45.526Z,1528899285.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:45.911Z,1528899285.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:45.929Z,1528899285.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:46.316Z,1528899286.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:46.341Z,1528899286.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:46.691Z,1528899286.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:46.725Z,1528899286.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:47.091Z,1528899287.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:47.132Z,1528899287.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:47.496Z,1528899287.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:47.513Z,1528899287.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:47.895Z,1528899287.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:47.913Z,1528899287.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:48.305Z,1528899288.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:48.339Z,1528899288.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:48.713Z,1528899288.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:48.746Z,1528899288.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:49.109Z,1528899289.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:49.140Z,1528899289.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:49.498Z,1528899289.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:49.516Z,1528899289.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:49.898Z,1528899289.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:49.916Z,1528899289.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:50.298Z,1528899290.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:50.316Z,1528899290.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:50.699Z,1528899290.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:50.716Z,1528899290.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:51.094Z,1528899291.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:51.112Z,1528899291.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:51.505Z,1528899291.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:51.523Z,1528899291.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:51.905Z,1528899291.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:51.923Z,1528899291.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:52.309Z,1528899292.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:52.353Z,1528899292.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:52.356Z,1528899292.356 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T14:14:52.356Z,1528899292.356 [Default:CheckIn:C.Wait] Stopped
2018-06-13T14:14:52.356Z,1528899292.356 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T14:14:52.356Z,1528899292.356 [Default:CheckIn:D] Running Loop=1
2018-06-13T14:14:52.702Z,1528899292.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:52.720Z,1528899292.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:52.724Z,1528899292.724 [Default:CheckIn:D] Stopped
2018-06-13T14:14:52.724Z,1528899292.724 [Default:CheckIn:E] Running Loop=1
2018-06-13T14:14:53.101Z,1528899293.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:53.120Z,1528899293.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:53.123Z,1528899293.123 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 647.654622 min 
2018-06-13T14:14:53.123Z,1528899293.123 [Default:CheckIn:E] Stopped
2018-06-13T14:14:53.123Z,1528899293.123 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T14:14:53.123Z,1528899293.123 [Default:CheckIn] Stopped
2018-06-13T14:14:53.124Z,1528899293.124 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T14:14:53.124Z,1528899293.124 [Default:CheckIn](INFO): Running loop #63
2018-06-13T14:14:53.124Z,1528899293.124 [Default:CheckIn] Running Loop=63
2018-06-13T14:14:53.124Z,1528899293.124 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T14:14:53.124Z,1528899293.124 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T14:14:53.503Z,1528899293.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:53.520Z,1528899293.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:53.900Z,1528899293.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:53.928Z,1528899293.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:57.017Z,1528899297.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:57.035Z,1528899297.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:57.211Z,1528899297.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:57.237Z,1528899297.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:57.603Z,1528899297.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:57.640Z,1528899297.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:57.987Z,1528899297.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:58.020Z,1528899298.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:58.384Z,1528899298.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:58.421Z,1528899298.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:58.783Z,1528899298.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:58.822Z,1528899298.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:59.204Z,1528899299.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:59.225Z,1528899299.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:14:59.603Z,1528899299.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:14:59.626Z,1528899299.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:00.000Z,1528899300.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:00.022Z,1528899300.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:00.388Z,1528899300.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:00.421Z,1528899300.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:00.783Z,1528899300.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:00.814Z,1528899300.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:01.201Z,1528899301.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:01.224Z,1528899301.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:01.604Z,1528899301.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:01.626Z,1528899301.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:01.998Z,1528899301.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:02.026Z,1528899302.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:02.384Z,1528899302.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:02.420Z,1528899302.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:02.783Z,1528899302.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:02.825Z,1528899302.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:03.205Z,1528899303.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:03.227Z,1528899303.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:03.605Z,1528899303.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:03.629Z,1528899303.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:04.009Z,1528899304.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:04.061Z,1528899304.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:04.383Z,1528899304.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:04.415Z,1528899304.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:04.783Z,1528899304.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:04.825Z,1528899304.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:05.206Z,1528899305.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:05.227Z,1528899305.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:05.603Z,1528899305.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:05.642Z,1528899305.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:05.000Z,1528899306.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:06.028Z,1528899306.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:06.384Z,1528899306.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:06.420Z,1528899306.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:06.783Z,1528899306.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:06.822Z,1528899306.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:07.200Z,1528899307.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:07.218Z,1528899307.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:07.604Z,1528899307.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:07.622Z,1528899307.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:07.000Z,1528899308.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:08.022Z,1528899308.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:08.384Z,1528899308.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:08.422Z,1528899308.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:08.787Z,1528899308.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:08.820Z,1528899308.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:09.203Z,1528899309.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:09.221Z,1528899309.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:09.603Z,1528899309.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:09.626Z,1528899309.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:10.004Z,1528899310.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:10.028Z,1528899310.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:10.383Z,1528899310.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:10.419Z,1528899310.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:10.783Z,1528899310.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:10.820Z,1528899310.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:11.203Z,1528899311.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:11.230Z,1528899311.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:11.603Z,1528899311.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:11.626Z,1528899311.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:11.999Z,1528899311.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:12.017Z,1528899312.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:12.384Z,1528899312.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:12.420Z,1528899312.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:12.783Z,1528899312.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:12.816Z,1528899312.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:13.193Z,1528899313.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:13.236Z,1528899313.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:13.605Z,1528899313.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:13.628Z,1528899313.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:13.993Z,1528899313.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:14.029Z,1528899314.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:14.384Z,1528899314.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:14.410Z,1528899314.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:14.783Z,1528899314.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:14.830Z,1528899314.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:15.193Z,1528899315.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:15.220Z,1528899315.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:15.597Z,1528899315.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:15.626Z,1528899315.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:15.997Z,1528899315.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:16.037Z,1528899316.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:16.384Z,1528899316.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:16.428Z,1528899316.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:16.787Z,1528899316.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:16.825Z,1528899316.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:17.193Z,1528899317.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:17.231Z,1528899317.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:17.602Z,1528899317.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:17.639Z,1528899317.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:17.998Z,1528899317.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:18.032Z,1528899318.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:18.387Z,1528899318.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:18.405Z,1528899318.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:18.788Z,1528899318.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:18.806Z,1528899318.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:19.195Z,1528899319.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:19.219Z,1528899319.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:19.598Z,1528899319.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:19.617Z,1528899319.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:19.998Z,1528899319.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:20.016Z,1528899320.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:20.394Z,1528899320.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:20.416Z,1528899320.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:20.786Z,1528899320.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:20.805Z,1528899320.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:21.187Z,1528899321.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:21.210Z,1528899321.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:21.598Z,1528899321.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:21.617Z,1528899321.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:21.998Z,1528899321.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:22.017Z,1528899322.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:22.398Z,1528899322.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:22.417Z,1528899322.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:22.787Z,1528899322.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:22.811Z,1528899322.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:23.186Z,1528899323.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:23.204Z,1528899323.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:23.587Z,1528899323.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:23.613Z,1528899323.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:23.986Z,1528899323.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:24.011Z,1528899324.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:24.401Z,1528899324.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:24.419Z,1528899324.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:24.801Z,1528899324.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:24.819Z,1528899324.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:25.199Z,1528899325.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:25.217Z,1528899325.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:25.583Z,1528899325.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:25.618Z,1528899325.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:25.983Z,1528899325.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:26.016Z,1528899326.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:26.383Z,1528899326.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:26.417Z,1528899326.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:26.784Z,1528899326.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:26.812Z,1528899326.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:27.183Z,1528899327.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:27.211Z,1528899327.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:27.599Z,1528899327.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:27.618Z,1528899327.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:28.000Z,1528899328.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:28.018Z,1528899328.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:28.393Z,1528899328.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:28.427Z,1528899328.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:28.783Z,1528899328.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:28.816Z,1528899328.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:29.183Z,1528899329.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:29.222Z,1528899329.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:29.583Z,1528899329.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:29.601Z,1528899329.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:29.987Z,1528899329.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:30.028Z,1528899330.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:30.393Z,1528899330.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:30.411Z,1528899330.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:30.797Z,1528899330.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:30.815Z,1528899330.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:31.194Z,1528899331.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:31.219Z,1528899331.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:31.585Z,1528899331.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:31.603Z,1528899331.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:31.990Z,1528899331.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:32.012Z,1528899332.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:32.388Z,1528899332.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:32.406Z,1528899332.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:32.786Z,1528899332.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:32.804Z,1528899332.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:33.188Z,1528899333.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:33.206Z,1528899333.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:33.594Z,1528899333.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:33.616Z,1528899333.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:33.995Z,1528899333.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:34.013Z,1528899334.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:34.394Z,1528899334.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:34.416Z,1528899334.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:34.789Z,1528899334.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:34.807Z,1528899334.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:35.186Z,1528899335.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:35.203Z,1528899335.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:35.590Z,1528899335.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:35.608Z,1528899335.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:35.989Z,1528899335.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:36.007Z,1528899336.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:36.399Z,1528899336.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:36.437Z,1528899336.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:36.797Z,1528899336.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:36.815Z,1528899336.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:37.194Z,1528899337.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:37.218Z,1528899337.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:37.586Z,1528899337.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:37.604Z,1528899337.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:37.989Z,1528899337.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:38.007Z,1528899338.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:38.387Z,1528899338.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:38.411Z,1528899338.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:38.787Z,1528899338.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:38.806Z,1528899338.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:39.187Z,1528899339.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:39.211Z,1528899339.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:39.599Z,1528899339.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:39.617Z,1528899339.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:39.999Z,1528899339.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:40.016Z,1528899340.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:40.398Z,1528899340.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:40.416Z,1528899340.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:40.787Z,1528899340.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:40.812Z,1528899340.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:41.186Z,1528899341.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:41.204Z,1528899341.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:41.590Z,1528899341.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:41.609Z,1528899341.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:41.987Z,1528899341.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:42.011Z,1528899342.011 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:42.012Z,1528899342.012 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 216
2018-06-13T14:15:42.012Z,1528899342.012 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:15:42.014Z,1528899342.014 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:42.014Z,1528899342.014 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 216
2018-06-13T14:15:42.014Z,1528899342.014 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:15:42.015Z,1528899342.015 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:42.016Z,1528899342.016 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 216
2018-06-13T14:15:42.016Z,1528899342.016 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:15:42.097Z,1528899342.097 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:15:42.097Z,1528899342.097 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:15:42.098Z,1528899342.098 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:15:42.403Z,1528899342.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:42.496Z,1528899342.496 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:15:42.496Z,1528899342.496 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 216
2018-06-13T14:15:42.497Z,1528899342.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:15:42.497Z,1528899342.497 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 216
2018-06-13T14:15:42.498Z,1528899342.498 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:15:42.498Z,1528899342.498 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 216
2018-06-13T14:15:42.801Z,1528899342.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:42.819Z,1528899342.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:15:42.819Z,1528899342.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:15:42.820Z,1528899342.820 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:15:42.820Z,1528899342.820 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:15:42.820Z,1528899342.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:15:42.821Z,1528899342.821 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:15:42.821Z,1528899342.821 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:15:42.822Z,1528899342.822 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:15:42.822Z,1528899342.822 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:15:43.206Z,1528899343.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:43.247Z,1528899343.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:15:43.248Z,1528899343.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:43.584Z,1528899343.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:43.616Z,1528899343.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:15:43.617Z,1528899343.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:43.983Z,1528899343.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:44.020Z,1528899344.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:15:44.021Z,1528899344.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:44.383Z,1528899344.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:44.420Z,1528899344.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:15:44.422Z,1528899344.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:44.783Z,1528899344.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:44.815Z,1528899344.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:15:44.816Z,1528899344.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:45.183Z,1528899345.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:45.215Z,1528899345.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:15:45.216Z,1528899345.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:45.599Z,1528899345.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:45.618Z,1528899345.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:15:45.619Z,1528899345.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:46.000Z,1528899346.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:46.018Z,1528899346.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:15:46.019Z,1528899346.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:46.404Z,1528899346.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:46.422Z,1528899346.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:15:46.423Z,1528899346.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:46.783Z,1528899346.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:46.819Z,1528899346.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:15:46.820Z,1528899346.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:47.179Z,1528899347.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:47.212Z,1528899347.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:15:47.218Z,1528899347.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:47.583Z,1528899347.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:47.622Z,1528899347.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:15:47.623Z,1528899347.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:47.983Z,1528899347.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:48.023Z,1528899348.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:15:48.024Z,1528899348.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:48.394Z,1528899348.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:48.422Z,1528899348.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:15:48.423Z,1528899348.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:48.797Z,1528899348.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:48.832Z,1528899348.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:15:48.833Z,1528899348.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:49.193Z,1528899349.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:49.221Z,1528899349.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:15:49.222Z,1528899349.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:49.583Z,1528899349.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:49.600Z,1528899349.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:15:49.617Z,1528899349.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:49.983Z,1528899349.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:49.000Z,1528899350.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:15:50.001Z,1528899350.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:50.387Z,1528899350.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:50.405Z,1528899350.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:15:50.406Z,1528899350.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:50.782Z,1528899350.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:50.800Z,1528899350.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:15:50.801Z,1528899350.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:51.186Z,1528899351.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:51.204Z,1528899351.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:15:51.204Z,1528899351.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:51.597Z,1528899351.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:51.631Z,1528899351.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:15:51.632Z,1528899351.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:51.993Z,1528899351.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:52.011Z,1528899352.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:15:52.011Z,1528899352.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:52.401Z,1528899352.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:52.436Z,1528899352.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:15:52.441Z,1528899352.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:52.790Z,1528899352.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:52.808Z,1528899352.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:15:52.809Z,1528899352.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:55.903Z,1528899355.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:55.937Z,1528899355.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T14:15:55.938Z,1528899355.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:56.063Z,1528899356.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:56.100Z,1528899356.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T14:15:56.101Z,1528899356.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:56.491Z,1528899356.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:56.508Z,1528899356.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T14:15:56.509Z,1528899356.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:56.884Z,1528899356.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:56.923Z,1528899356.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T14:15:56.924Z,1528899356.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:57.279Z,1528899357.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:57.297Z,1528899357.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T14:15:57.298Z,1528899357.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:57.663Z,1528899357.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:57.707Z,1528899357.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T14:15:57.708Z,1528899357.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:58.059Z,1528899358.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:58.092Z,1528899358.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T14:15:58.097Z,1528899358.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:58.464Z,1528899358.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:58.504Z,1528899358.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T14:15:58.506Z,1528899358.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:58.863Z,1528899358.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:58.896Z,1528899358.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T14:15:58.901Z,1528899358.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:59.273Z,1528899359.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:59.306Z,1528899359.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T14:15:59.307Z,1528899359.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:15:59.677Z,1528899359.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:15:59.709Z,1528899359.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T14:15:59.710Z,1528899359.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:00.074Z,1528899360.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:00.125Z,1528899360.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T14:16:00.126Z,1528899360.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:00.463Z,1528899360.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:00.480Z,1528899360.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T14:16:00.490Z,1528899360.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:00.863Z,1528899360.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:00.880Z,1528899360.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T14:16:00.882Z,1528899360.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:01.277Z,1528899361.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:01.320Z,1528899361.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T14:16:01.325Z,1528899361.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:01.681Z,1528899361.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:01.714Z,1528899361.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T14:16:01.715Z,1528899361.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:02.077Z,1528899362.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:02.118Z,1528899362.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:02.467Z,1528899362.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:02.492Z,1528899362.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:02.867Z,1528899362.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:02.885Z,1528899362.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:03.274Z,1528899363.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:03.292Z,1528899363.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:03.681Z,1528899363.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:03.699Z,1528899363.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:04.077Z,1528899364.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:04.100Z,1528899364.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:04.474Z,1528899364.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:04.494Z,1528899364.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:04.867Z,1528899364.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:04.892Z,1528899364.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:05.281Z,1528899365.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:05.299Z,1528899365.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:05.679Z,1528899365.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:05.706Z,1528899365.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:06.080Z,1528899366.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:06.103Z,1528899366.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:06.471Z,1528899366.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:06.489Z,1528899366.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:06.867Z,1528899366.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:06.901Z,1528899366.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:07.280Z,1528899367.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:07.299Z,1528899367.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:07.684Z,1528899367.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:07.708Z,1528899367.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:08.079Z,1528899368.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:08.098Z,1528899368.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:08.463Z,1528899368.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:08.501Z,1528899368.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:08.860Z,1528899368.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:08.900Z,1528899368.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:09.263Z,1528899369.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:09.297Z,1528899369.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:09.673Z,1528899369.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:09.712Z,1528899369.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:10.078Z,1528899370.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:10.107Z,1528899370.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:10.474Z,1528899370.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:10.507Z,1528899370.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:10.863Z,1528899370.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:10.881Z,1528899370.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:11.263Z,1528899371.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:11.281Z,1528899371.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:11.664Z,1528899371.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:11.702Z,1528899371.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:12.062Z,1528899372.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:12.093Z,1528899372.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:12.472Z,1528899372.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:12.490Z,1528899372.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:12.877Z,1528899372.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:12.895Z,1528899372.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:13.274Z,1528899373.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:13.296Z,1528899373.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:13.666Z,1528899373.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:13.684Z,1528899373.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:14.067Z,1528899374.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:14.090Z,1528899374.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:14.467Z,1528899374.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:14.491Z,1528899374.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:14.867Z,1528899374.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:14.885Z,1528899374.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:15.267Z,1528899375.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:15.290Z,1528899375.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:15.679Z,1528899375.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:15.697Z,1528899375.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:16.078Z,1528899376.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:16.096Z,1528899376.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:16.478Z,1528899376.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:16.496Z,1528899376.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:16.867Z,1528899376.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:16.901Z,1528899376.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:17.263Z,1528899377.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:17.291Z,1528899377.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:17.674Z,1528899377.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:17.696Z,1528899377.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:18.063Z,1528899378.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:18.097Z,1528899378.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:18.480Z,1528899378.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:18.498Z,1528899378.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:18.883Z,1528899378.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:18.902Z,1528899378.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:19.280Z,1528899379.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:19.298Z,1528899379.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:19.660Z,1528899379.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:19.696Z,1528899379.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:20.059Z,1528899380.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:20.099Z,1528899380.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:20.463Z,1528899380.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:20.500Z,1528899380.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:20.860Z,1528899380.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:20.890Z,1528899380.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:21.263Z,1528899381.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:21.289Z,1528899381.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:21.674Z,1528899381.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:21.703Z,1528899381.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:22.077Z,1528899382.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:22.105Z,1528899382.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:22.473Z,1528899382.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:22.500Z,1528899382.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:22.863Z,1528899382.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:22.893Z,1528899382.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:23.260Z,1528899383.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:23.284Z,1528899383.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:23.668Z,1528899383.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:23.685Z,1528899383.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:24.066Z,1528899384.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:24.084Z,1528899384.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:24.472Z,1528899384.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:24.490Z,1528899384.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:24.877Z,1528899384.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:24.895Z,1528899384.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:25.274Z,1528899385.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:25.292Z,1528899385.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:25.667Z,1528899385.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:25.684Z,1528899385.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:26.070Z,1528899386.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:26.087Z,1528899386.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:26.468Z,1528899386.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:26.494Z,1528899386.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:26.864Z,1528899386.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:26.892Z,1528899386.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:27.259Z,1528899387.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:27.296Z,1528899387.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:27.680Z,1528899387.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:27.698Z,1528899387.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:28.079Z,1528899388.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:28.101Z,1528899388.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:28.480Z,1528899388.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:28.499Z,1528899388.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:28.863Z,1528899388.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:28.900Z,1528899388.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:29.263Z,1528899389.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:29.298Z,1528899389.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:29.660Z,1528899389.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:29.698Z,1528899389.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:30.063Z,1528899390.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:30.094Z,1528899390.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:30.477Z,1528899390.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:30.507Z,1528899390.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:30.877Z,1528899390.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:30.909Z,1528899390.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:31.274Z,1528899391.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:31.302Z,1528899391.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:31.670Z,1528899391.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:31.688Z,1528899391.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:32.069Z,1528899392.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:32.087Z,1528899392.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:32.469Z,1528899392.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:32.487Z,1528899392.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:32.866Z,1528899392.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:32.884Z,1528899392.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:33.259Z,1528899393.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:33.290Z,1528899393.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:33.679Z,1528899393.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:33.697Z,1528899393.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:34.083Z,1528899394.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:34.101Z,1528899394.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:34.478Z,1528899394.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:34.496Z,1528899394.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:34.867Z,1528899394.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:34.901Z,1528899394.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:35.259Z,1528899395.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:35.287Z,1528899395.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:35.664Z,1528899395.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:35.696Z,1528899395.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:36.064Z,1528899396.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:36.094Z,1528899396.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:36.480Z,1528899396.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:36.498Z,1528899396.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:36.883Z,1528899396.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:36.901Z,1528899396.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:37.279Z,1528899397.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:37.297Z,1528899397.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:37.659Z,1528899397.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:37.689Z,1528899397.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:38.064Z,1528899398.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:38.094Z,1528899398.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:38.463Z,1528899398.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:38.497Z,1528899398.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:38.864Z,1528899398.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:38.882Z,1528899398.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:39.267Z,1528899399.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:39.285Z,1528899399.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:39.677Z,1528899399.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:39.711Z,1528899399.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:40.073Z,1528899400.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:40.104Z,1528899400.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:40.482Z,1528899400.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:40.514Z,1528899400.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:40.867Z,1528899400.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:40.892Z,1528899400.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:41.266Z,1528899401.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:41.284Z,1528899401.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:41.664Z,1528899401.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:41.694Z,1528899401.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:42.068Z,1528899402.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:42.087Z,1528899402.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:42.473Z,1528899402.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:42.491Z,1528899402.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:42.877Z,1528899402.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:42.895Z,1528899402.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:43.275Z,1528899403.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:43.292Z,1528899403.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:43.667Z,1528899403.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:43.684Z,1528899403.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:44.071Z,1528899404.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:44.089Z,1528899404.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:44.467Z,1528899404.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:44.499Z,1528899404.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:44.867Z,1528899404.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:44.886Z,1528899404.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:45.268Z,1528899405.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:45.301Z,1528899405.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:45.680Z,1528899405.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:45.698Z,1528899405.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:46.080Z,1528899406.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:46.099Z,1528899406.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:46.479Z,1528899406.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:46.497Z,1528899406.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:46.869Z,1528899406.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:46.887Z,1528899406.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:47.259Z,1528899407.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:47.298Z,1528899407.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:47.664Z,1528899407.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:47.694Z,1528899407.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:48.059Z,1528899408.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:48.086Z,1528899408.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:48.484Z,1528899408.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:48.502Z,1528899408.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:48.883Z,1528899408.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:48.902Z,1528899408.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:49.279Z,1528899409.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:49.296Z,1528899409.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:49.659Z,1528899409.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:49.690Z,1528899409.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:50.063Z,1528899410.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:50.093Z,1528899410.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:50.459Z,1528899410.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:50.492Z,1528899410.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:50.860Z,1528899410.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:50.886Z,1528899410.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:51.263Z,1528899411.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:51.300Z,1528899411.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:51.673Z,1528899411.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:51.708Z,1528899411.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:52.073Z,1528899412.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:52.107Z,1528899412.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:52.477Z,1528899412.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:52.501Z,1528899412.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:52.863Z,1528899412.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:52.901Z,1528899412.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:53.270Z,1528899413.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:53.288Z,1528899413.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:53.673Z,1528899413.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:53.691Z,1528899413.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:54.071Z,1528899414.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:54.089Z,1528899414.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:57.185Z,1528899417.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:57.203Z,1528899417.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:57.368Z,1528899417.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:57.405Z,1528899417.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:57.764Z,1528899417.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:57.800Z,1528899417.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:58.147Z,1528899418.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:58.178Z,1528899418.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:58.543Z,1528899418.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:58.578Z,1528899418.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:58.942Z,1528899418.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:58.960Z,1528899418.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:59.357Z,1528899419.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:59.391Z,1528899419.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:16:59.758Z,1528899419.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:16:59.792Z,1528899419.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:00.157Z,1528899420.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:00.175Z,1528899420.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:00.550Z,1528899420.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:00.568Z,1528899420.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:00.947Z,1528899420.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:00.978Z,1528899420.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:01.348Z,1528899421.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:01.372Z,1528899421.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:01.754Z,1528899421.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:01.774Z,1528899421.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:02.157Z,1528899422.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:02.175Z,1528899422.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:02.558Z,1528899422.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:02.576Z,1528899422.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:02.946Z,1528899422.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:02.964Z,1528899422.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:03.339Z,1528899423.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:03.374Z,1528899423.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:03.749Z,1528899423.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:03.767Z,1528899423.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:04.150Z,1528899424.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:04.168Z,1528899424.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:04.559Z,1528899424.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:04.591Z,1528899424.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:04.962Z,1528899424.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:04.979Z,1528899424.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:05.359Z,1528899425.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:05.381Z,1528899425.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:05.743Z,1528899425.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:05.779Z,1528899425.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:06.143Z,1528899426.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:06.176Z,1528899426.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:06.539Z,1528899426.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:06.574Z,1528899426.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:06.944Z,1528899426.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:06.974Z,1528899426.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:07.339Z,1528899427.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:07.373Z,1528899427.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:07.761Z,1528899427.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:07.779Z,1528899427.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:08.162Z,1528899428.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:08.180Z,1528899428.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:08.557Z,1528899428.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:08.589Z,1528899428.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:08.943Z,1528899428.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:08.976Z,1528899428.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:09.339Z,1528899429.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:09.373Z,1528899429.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:09.743Z,1528899429.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:09.781Z,1528899429.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:10.143Z,1528899430.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:10.181Z,1528899430.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:10.557Z,1528899430.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:10.591Z,1528899430.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:10.957Z,1528899430.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:10.975Z,1528899430.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:11.357Z,1528899431.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:11.376Z,1528899431.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:11.748Z,1528899431.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:11.766Z,1528899431.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:12.150Z,1528899432.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:12.168Z,1528899432.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:12.549Z,1528899432.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:12.567Z,1528899432.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:12.953Z,1528899432.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:12.971Z,1528899432.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:13.352Z,1528899433.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:13.370Z,1528899433.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:13.757Z,1528899433.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:13.775Z,1528899433.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:14.158Z,1528899434.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:14.176Z,1528899434.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:14.554Z,1528899434.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:14.572Z,1528899434.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:14.951Z,1528899434.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:14.969Z,1528899434.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:15.343Z,1528899435.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:15.372Z,1528899435.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:15.743Z,1528899435.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:15.772Z,1528899435.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:16.143Z,1528899436.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:16.180Z,1528899436.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:16.553Z,1528899436.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:16.590Z,1528899436.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:16.965Z,1528899436.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:16.983Z,1528899436.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:17.364Z,1528899437.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:17.383Z,1528899437.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:17.743Z,1528899437.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:17.780Z,1528899437.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:18.143Z,1528899438.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:18.180Z,1528899438.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:18.543Z,1528899438.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:18.582Z,1528899438.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:18.943Z,1528899438.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:18.978Z,1528899438.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:19.343Z,1528899439.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:19.391Z,1528899439.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:19.757Z,1528899439.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:19.785Z,1528899439.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:20.157Z,1528899440.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:20.184Z,1528899440.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:20.553Z,1528899440.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:20.589Z,1528899440.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:20.943Z,1528899440.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:20.961Z,1528899440.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:21.347Z,1528899441.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:21.364Z,1528899441.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:21.747Z,1528899441.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:21.766Z,1528899441.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:22.146Z,1528899442.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:22.164Z,1528899442.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:22.557Z,1528899442.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:22.591Z,1528899442.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:22.957Z,1528899442.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:22.975Z,1528899442.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:23.357Z,1528899443.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:23.375Z,1528899443.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:23.748Z,1528899443.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:23.772Z,1528899443.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:24.148Z,1528899444.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:24.166Z,1528899444.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:24.549Z,1528899444.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:24.567Z,1528899444.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:24.948Z,1528899444.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:24.969Z,1528899444.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:25.348Z,1528899445.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:25.366Z,1528899445.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:25.757Z,1528899445.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:25.776Z,1528899445.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:26.157Z,1528899446.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:26.175Z,1528899446.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:26.557Z,1528899446.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:26.576Z,1528899446.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:26.950Z,1528899446.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:26.968Z,1528899446.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:27.349Z,1528899447.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:27.367Z,1528899447.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:27.747Z,1528899447.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:27.784Z,1528899447.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:28.150Z,1528899448.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:28.168Z,1528899448.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:28.558Z,1528899448.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:28.591Z,1528899448.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:28.963Z,1528899448.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:28.988Z,1528899448.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:29.364Z,1528899449.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:29.382Z,1528899449.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:29.743Z,1528899449.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:29.770Z,1528899449.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:30.143Z,1528899450.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:30.172Z,1528899450.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:30.544Z,1528899450.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:30.574Z,1528899450.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:30.940Z,1528899450.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:30.980Z,1528899450.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:31.344Z,1528899451.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:31.378Z,1528899451.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:31.760Z,1528899451.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:31.779Z,1528899451.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:32.163Z,1528899452.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:32.181Z,1528899452.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:32.550Z,1528899452.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:32.589Z,1528899452.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:32.948Z,1528899452.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:32.982Z,1528899452.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:33.348Z,1528899453.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:33.366Z,1528899453.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:33.746Z,1528899453.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:33.766Z,1528899453.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:34.142Z,1528899454.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:34.161Z,1528899454.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:34.558Z,1528899454.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:34.576Z,1528899454.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:34.957Z,1528899454.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:35.005Z,1528899455.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:35.358Z,1528899455.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:35.377Z,1528899455.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:35.747Z,1528899455.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:35.770Z,1528899455.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:36.147Z,1528899456.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:36.189Z,1528899456.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:36.546Z,1528899456.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:36.563Z,1528899456.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:36.947Z,1528899456.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:36.970Z,1528899456.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:37.348Z,1528899457.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:37.367Z,1528899457.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:37.758Z,1528899457.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:37.777Z,1528899457.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:38.158Z,1528899458.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:38.180Z,1528899458.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:38.558Z,1528899458.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:38.576Z,1528899458.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:38.946Z,1528899458.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:38.964Z,1528899458.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:39.347Z,1528899459.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:39.377Z,1528899459.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:39.747Z,1528899459.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:39.782Z,1528899459.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:40.139Z,1528899460.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:40.176Z,1528899460.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:40.559Z,1528899460.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:40.577Z,1528899460.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:40.963Z,1528899460.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:40.988Z,1528899460.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:41.359Z,1528899461.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:41.377Z,1528899461.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:41.743Z,1528899461.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:41.779Z,1528899461.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:42.143Z,1528899462.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:42.181Z,1528899462.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:42.539Z,1528899462.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:42.574Z,1528899462.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:42.944Z,1528899462.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:42.979Z,1528899462.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:43.343Z,1528899463.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:43.380Z,1528899463.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:43.764Z,1528899463.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:43.782Z,1528899463.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:44.163Z,1528899464.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:44.181Z,1528899464.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:44.559Z,1528899464.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:44.578Z,1528899464.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:44.939Z,1528899464.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:44.970Z,1528899464.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:45.343Z,1528899465.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:45.377Z,1528899465.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:45.744Z,1528899465.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:45.784Z,1528899465.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:46.143Z,1528899466.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:46.177Z,1528899466.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:46.553Z,1528899466.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:46.587Z,1528899466.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:46.958Z,1528899466.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:46.986Z,1528899466.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:47.357Z,1528899467.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:47.385Z,1528899467.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:47.743Z,1528899467.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:47.760Z,1528899467.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:48.147Z,1528899468.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:48.164Z,1528899468.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:48.547Z,1528899468.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:48.565Z,1528899468.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:48.947Z,1528899468.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:48.965Z,1528899468.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:49.346Z,1528899469.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:49.364Z,1528899469.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:49.757Z,1528899469.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:49.791Z,1528899469.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:50.157Z,1528899470.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:50.175Z,1528899470.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:50.554Z,1528899470.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:50.572Z,1528899470.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:50.946Z,1528899470.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:50.964Z,1528899470.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:51.342Z,1528899471.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:51.372Z,1528899471.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:51.748Z,1528899471.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:51.775Z,1528899471.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:52.147Z,1528899472.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:52.164Z,1528899472.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:52.557Z,1528899472.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:52.575Z,1528899472.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:52.961Z,1528899472.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:52.979Z,1528899472.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:56.066Z,1528899476.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:56.084Z,1528899476.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:56.224Z,1528899476.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:56.260Z,1528899476.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:56.619Z,1528899476.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:56.658Z,1528899476.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:57.024Z,1528899477.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:57.062Z,1528899477.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:57.416Z,1528899477.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:57.433Z,1528899477.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:57.829Z,1528899477.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:57.868Z,1528899477.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:58.237Z,1528899478.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:58.279Z,1528899478.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:58.633Z,1528899478.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:58.667Z,1528899478.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:59.022Z,1528899479.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:59.040Z,1528899479.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:59.419Z,1528899479.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:59.437Z,1528899479.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:17:59.820Z,1528899479.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:17:59.846Z,1528899479.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:00.221Z,1528899480.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:00.244Z,1528899480.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:00.629Z,1528899480.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:00.647Z,1528899480.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:01.030Z,1528899481.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:01.052Z,1528899481.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:01.430Z,1528899481.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:01.455Z,1528899481.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:01.823Z,1528899481.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:01.842Z,1528899481.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:02.219Z,1528899482.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:02.244Z,1528899482.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:02.622Z,1528899482.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:02.641Z,1528899482.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:03.019Z,1528899483.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:03.038Z,1528899483.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:03.411Z,1528899483.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:03.446Z,1528899483.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:03.836Z,1528899483.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:03.855Z,1528899483.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:04.236Z,1528899484.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:04.255Z,1528899484.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:04.636Z,1528899484.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:04.654Z,1528899484.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:05.016Z,1528899485.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:05.050Z,1528899485.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:05.416Z,1528899485.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:05.454Z,1528899485.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:05.816Z,1528899485.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:05.842Z,1528899485.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:06.215Z,1528899486.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:06.249Z,1528899486.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:06.630Z,1528899486.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:06.664Z,1528899486.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:07.029Z,1528899487.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:07.067Z,1528899487.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:07.429Z,1528899487.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:07.465Z,1528899487.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:07.815Z,1528899487.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:07.833Z,1528899487.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:08.219Z,1528899488.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:08.244Z,1528899488.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:08.618Z,1528899488.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:08.637Z,1528899488.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:09.022Z,1528899489.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:09.040Z,1528899489.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:09.422Z,1528899489.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:09.440Z,1528899489.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:09.829Z,1528899489.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:09.847Z,1528899489.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:10.229Z,1528899490.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:10.247Z,1528899490.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:10.629Z,1528899490.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:10.647Z,1528899490.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:11.020Z,1528899491.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:11.039Z,1528899491.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:11.422Z,1528899491.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:11.440Z,1528899491.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:11.820Z,1528899491.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:11.842Z,1528899491.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:12.219Z,1528899492.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:12.249Z,1528899492.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:12.629Z,1528899492.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:12.647Z,1528899492.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:13.029Z,1528899493.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:13.047Z,1528899493.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:13.430Z,1528899493.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:13.448Z,1528899493.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:13.823Z,1528899493.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:13.841Z,1528899493.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:14.220Z,1528899494.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:14.246Z,1528899494.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:14.619Z,1528899494.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:14.652Z,1528899494.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:15.020Z,1528899495.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:15.038Z,1528899495.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:15.422Z,1528899495.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:15.439Z,1528899495.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:15.829Z,1528899495.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:15.847Z,1528899495.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:16.228Z,1528899496.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:16.246Z,1528899496.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:16.630Z,1528899496.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:16.647Z,1528899496.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:17.022Z,1528899497.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:17.040Z,1528899497.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:17.421Z,1528899497.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:17.439Z,1528899497.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:17.820Z,1528899497.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:17.846Z,1528899497.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:18.223Z,1528899498.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:18.242Z,1528899498.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:18.633Z,1528899498.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:18.651Z,1528899498.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:19.030Z,1528899499.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:19.060Z,1528899499.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:19.436Z,1528899499.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:19.454Z,1528899499.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:19.815Z,1528899499.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:19.846Z,1528899499.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:20.214Z,1528899500.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:20.249Z,1528899500.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:20.615Z,1528899500.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:20.655Z,1528899500.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:21.016Z,1528899501.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:21.051Z,1528899501.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:21.415Z,1528899501.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:21.450Z,1528899501.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:21.829Z,1528899501.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:21.859Z,1528899501.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:22.229Z,1528899502.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:22.264Z,1528899502.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:22.629Z,1528899502.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:22.658Z,1528899502.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:23.016Z,1528899503.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:23.051Z,1528899503.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:23.415Z,1528899503.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:23.433Z,1528899503.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:23.816Z,1528899503.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:23.834Z,1528899503.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:24.216Z,1528899504.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:24.234Z,1528899504.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:24.625Z,1528899504.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:24.659Z,1528899504.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:25.034Z,1528899505.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:25.066Z,1528899505.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:25.429Z,1528899505.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:25.463Z,1528899505.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:25.819Z,1528899505.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:25.837Z,1528899505.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:26.220Z,1528899506.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:26.246Z,1528899506.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:26.622Z,1528899506.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:26.640Z,1528899506.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:27.023Z,1528899507.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:27.042Z,1528899507.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:27.421Z,1528899507.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:27.439Z,1528899507.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:27.829Z,1528899507.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:27.847Z,1528899507.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:28.229Z,1528899508.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:28.247Z,1528899508.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:28.629Z,1528899508.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:28.647Z,1528899508.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:29.022Z,1528899509.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:29.040Z,1528899509.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:29.422Z,1528899509.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:29.440Z,1528899509.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:29.821Z,1528899509.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:29.851Z,1528899509.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:30.214Z,1528899510.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:30.248Z,1528899510.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:30.631Z,1528899510.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:30.650Z,1528899510.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:31.030Z,1528899511.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:31.052Z,1528899511.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:31.430Z,1528899511.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:31.448Z,1528899511.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:31.823Z,1528899511.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:31.842Z,1528899511.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:32.219Z,1528899512.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:32.243Z,1528899512.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:32.619Z,1528899512.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:32.652Z,1528899512.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:33.023Z,1528899513.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:33.041Z,1528899513.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:33.422Z,1528899513.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:33.439Z,1528899513.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:33.830Z,1528899513.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:33.856Z,1528899513.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:34.231Z,1528899514.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:34.249Z,1528899514.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:34.631Z,1528899514.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:34.656Z,1528899514.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:35.019Z,1528899515.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:35.044Z,1528899515.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:35.423Z,1528899515.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:35.441Z,1528899515.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:35.820Z,1528899515.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:35.846Z,1528899515.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:36.219Z,1528899516.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:36.252Z,1528899516.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:36.636Z,1528899516.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:36.655Z,1528899516.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:37.035Z,1528899517.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:37.060Z,1528899517.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:37.435Z,1528899517.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:37.453Z,1528899517.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:37.812Z,1528899517.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:37.842Z,1528899517.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:38.214Z,1528899518.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:38.252Z,1528899518.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:38.615Z,1528899518.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:38.650Z,1528899518.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:39.016Z,1528899519.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:39.051Z,1528899519.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:39.417Z,1528899519.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:39.443Z,1528899519.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:39.829Z,1528899519.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:39.867Z,1528899519.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:40.229Z,1528899520.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:40.264Z,1528899520.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:40.630Z,1528899520.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:40.666Z,1528899520.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:41.019Z,1528899521.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:41.044Z,1528899521.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:41.418Z,1528899521.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:41.438Z,1528899521.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:41.820Z,1528899521.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:41.846Z,1528899521.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:42.219Z,1528899522.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:42.249Z,1528899522.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:42.629Z,1528899522.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:42.648Z,1528899522.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:43.029Z,1528899523.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:43.047Z,1528899523.047 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:43.048Z,1528899523.048 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 217
2018-06-13T14:18:43.048Z,1528899523.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:18:43.050Z,1528899523.050 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:43.050Z,1528899523.050 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 217
2018-06-13T14:18:43.050Z,1528899523.050 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:18:43.051Z,1528899523.051 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:43.052Z,1528899523.052 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 217
2018-06-13T14:18:43.052Z,1528899523.052 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:18:43.144Z,1528899523.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:18:43.144Z,1528899523.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:18:43.145Z,1528899523.145 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:18:43.426Z,1528899523.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:43.541Z,1528899523.541 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:18:43.541Z,1528899523.541 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 217
2018-06-13T14:18:43.542Z,1528899523.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:18:43.542Z,1528899523.542 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 217
2018-06-13T14:18:43.542Z,1528899523.542 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:18:43.542Z,1528899523.542 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 217
2018-06-13T14:18:43.811Z,1528899523.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:43.845Z,1528899523.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:18:43.846Z,1528899523.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:18:43.846Z,1528899523.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:18:43.846Z,1528899523.846 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:18:43.847Z,1528899523.847 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:18:43.847Z,1528899523.847 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:18:43.847Z,1528899523.847 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:18:43.848Z,1528899523.848 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:18:43.848Z,1528899523.848 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:18:44.217Z,1528899524.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:44.244Z,1528899524.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:18:44.245Z,1528899524.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:44.615Z,1528899524.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:44.648Z,1528899524.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:18:44.649Z,1528899524.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:45.012Z,1528899525.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:45.048Z,1528899525.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:18:45.049Z,1528899525.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:45.411Z,1528899525.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:45.448Z,1528899525.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:18:45.449Z,1528899525.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:45.836Z,1528899525.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:45.853Z,1528899525.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:18:45.854Z,1528899525.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:46.233Z,1528899526.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:46.251Z,1528899526.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:18:46.252Z,1528899526.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:46.636Z,1528899526.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:46.653Z,1528899526.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:18:46.654Z,1528899526.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:47.015Z,1528899527.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:47.050Z,1528899527.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:18:47.051Z,1528899527.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:47.415Z,1528899527.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:47.448Z,1528899527.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:18:47.449Z,1528899527.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:47.816Z,1528899527.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:47.856Z,1528899527.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:18:47.857Z,1528899527.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:48.215Z,1528899528.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:48.253Z,1528899528.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:18:48.254Z,1528899528.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:48.636Z,1528899528.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:48.654Z,1528899528.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:18:48.655Z,1528899528.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:49.035Z,1528899529.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:49.052Z,1528899529.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:18:49.053Z,1528899529.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:49.436Z,1528899529.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:49.453Z,1528899529.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:18:49.454Z,1528899529.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:49.815Z,1528899529.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:49.848Z,1528899529.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:18:49.849Z,1528899529.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:50.216Z,1528899530.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:50.255Z,1528899530.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:18:50.256Z,1528899530.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:50.615Z,1528899530.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:50.657Z,1528899530.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:18:50.658Z,1528899530.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:51.016Z,1528899531.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:51.051Z,1528899531.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:18:51.051Z,1528899531.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:51.415Z,1528899531.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:51.449Z,1528899531.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:18:51.450Z,1528899531.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:51.829Z,1528899531.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:51.866Z,1528899531.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:18:51.867Z,1528899531.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:52.229Z,1528899532.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:52.257Z,1528899532.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:18:52.258Z,1528899532.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:52.629Z,1528899532.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:52.656Z,1528899532.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:18:52.658Z,1528899532.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:53.015Z,1528899533.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:53.045Z,1528899533.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:18:53.046Z,1528899533.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:53.415Z,1528899533.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:53.433Z,1528899533.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:18:53.434Z,1528899533.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:53.817Z,1528899533.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:53.834Z,1528899533.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:18:53.835Z,1528899533.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:54.216Z,1528899534.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:54.233Z,1528899534.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:18:54.234Z,1528899534.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:54.633Z,1528899534.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:54.670Z,1528899534.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:18:54.671Z,1528899534.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:55.033Z,1528899535.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:55.059Z,1528899535.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:18:55.060Z,1528899535.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:55.429Z,1528899535.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:55.463Z,1528899535.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:18:55.464Z,1528899535.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:55.816Z,1528899535.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:55.834Z,1528899535.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:18:55.835Z,1528899535.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:56.223Z,1528899536.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:56.241Z,1528899536.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:18:56.242Z,1528899536.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:56.620Z,1528899536.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:56.638Z,1528899536.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:18:56.639Z,1528899536.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:59.734Z,1528899539.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:59.751Z,1528899539.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-06-13T14:18:59.752Z,1528899539.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:18:59.895Z,1528899539.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:18:59.924Z,1528899539.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T14:18:59.926Z,1528899539.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:00.311Z,1528899540.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:00.329Z,1528899540.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T14:19:00.330Z,1528899540.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:00.716Z,1528899540.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:00.734Z,1528899540.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T14:19:00.735Z,1528899540.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:01.101Z,1528899541.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:01.140Z,1528899541.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T14:19:01.141Z,1528899541.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:01.491Z,1528899541.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:01.508Z,1528899541.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T14:19:01.526Z,1528899541.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:01.892Z,1528899541.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:01.909Z,1528899541.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T14:19:01.910Z,1528899541.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:02.292Z,1528899542.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:02.328Z,1528899542.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T14:19:02.333Z,1528899542.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:02.705Z,1528899542.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:02.723Z,1528899542.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T14:19:02.724Z,1528899542.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:03.101Z,1528899543.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:03.119Z,1528899543.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:03.502Z,1528899543.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:03.519Z,1528899543.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:03.898Z,1528899543.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:03.916Z,1528899543.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:04.295Z,1528899544.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:04.312Z,1528899544.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:04.699Z,1528899544.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:04.717Z,1528899544.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:05.097Z,1528899545.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:05.116Z,1528899545.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:05.494Z,1528899545.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:05.512Z,1528899545.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:05.902Z,1528899545.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:05.921Z,1528899545.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:06.306Z,1528899546.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:06.324Z,1528899546.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:06.706Z,1528899546.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:06.724Z,1528899546.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:07.096Z,1528899547.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:07.120Z,1528899547.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:07.496Z,1528899547.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:07.514Z,1528899547.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:07.894Z,1528899547.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:07.912Z,1528899547.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:08.295Z,1528899548.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:08.321Z,1528899548.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:08.702Z,1528899548.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:08.720Z,1528899548.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:09.101Z,1528899549.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:09.119Z,1528899549.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:09.502Z,1528899549.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:09.520Z,1528899549.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:09.895Z,1528899549.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:09.913Z,1528899549.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:10.294Z,1528899550.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:10.312Z,1528899550.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:10.696Z,1528899550.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:10.717Z,1528899550.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:11.096Z,1528899551.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:11.113Z,1528899551.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:11.498Z,1528899551.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:11.516Z,1528899551.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:11.902Z,1528899551.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:11.920Z,1528899551.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:12.305Z,1528899552.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:12.322Z,1528899552.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:12.705Z,1528899552.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:12.723Z,1528899552.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:13.096Z,1528899553.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:13.120Z,1528899553.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:13.496Z,1528899553.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:13.514Z,1528899553.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:13.894Z,1528899553.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:13.912Z,1528899553.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:14.296Z,1528899554.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:14.314Z,1528899554.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:14.701Z,1528899554.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:14.719Z,1528899554.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:15.101Z,1528899555.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:15.119Z,1528899555.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:15.502Z,1528899555.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:15.520Z,1528899555.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:15.895Z,1528899555.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:15.913Z,1528899555.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:16.297Z,1528899556.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:16.315Z,1528899556.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:16.696Z,1528899556.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:16.720Z,1528899556.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:17.096Z,1528899557.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:17.114Z,1528899557.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:17.494Z,1528899557.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:17.512Z,1528899557.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:17.905Z,1528899557.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:17.923Z,1528899557.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:18.304Z,1528899558.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:18.328Z,1528899558.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:18.701Z,1528899558.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:18.719Z,1528899558.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:19.096Z,1528899559.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:19.114Z,1528899559.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:19.495Z,1528899559.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:19.513Z,1528899559.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:19.897Z,1528899559.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:19.915Z,1528899559.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:20.296Z,1528899560.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:20.320Z,1528899560.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:20.701Z,1528899560.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:20.719Z,1528899560.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:21.105Z,1528899561.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:21.123Z,1528899561.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:21.502Z,1528899561.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:21.519Z,1528899561.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:21.895Z,1528899561.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:21.913Z,1528899561.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:22.297Z,1528899562.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:22.315Z,1528899562.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:22.696Z,1528899562.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:22.714Z,1528899562.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:23.096Z,1528899563.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:23.127Z,1528899563.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:23.497Z,1528899563.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:23.515Z,1528899563.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:23.902Z,1528899563.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:23.924Z,1528899563.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:24.301Z,1528899564.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:24.319Z,1528899564.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:24.705Z,1528899564.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:24.723Z,1528899564.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:25.097Z,1528899565.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:25.115Z,1528899565.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:25.498Z,1528899565.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:25.515Z,1528899565.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:25.899Z,1528899565.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:25.917Z,1528899565.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:26.294Z,1528899566.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:26.323Z,1528899566.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:26.702Z,1528899566.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:26.719Z,1528899566.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:27.106Z,1528899567.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:27.125Z,1528899567.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:27.506Z,1528899567.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:27.524Z,1528899567.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:27.898Z,1528899567.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:27.916Z,1528899567.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:28.298Z,1528899568.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:28.317Z,1528899568.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:28.695Z,1528899568.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:28.727Z,1528899568.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:29.093Z,1528899569.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:29.112Z,1528899569.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:29.498Z,1528899569.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:29.521Z,1528899569.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:29.903Z,1528899569.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:29.921Z,1528899569.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:30.310Z,1528899570.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:30.351Z,1528899570.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:30.706Z,1528899570.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:30.723Z,1528899570.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:31.095Z,1528899571.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:31.118Z,1528899571.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:31.495Z,1528899571.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:31.524Z,1528899571.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:31.899Z,1528899571.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:31.918Z,1528899571.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:32.295Z,1528899572.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:32.317Z,1528899572.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:32.705Z,1528899572.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:32.723Z,1528899572.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:33.105Z,1528899573.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:33.123Z,1528899573.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:33.502Z,1528899573.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:33.524Z,1528899573.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:33.895Z,1528899573.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:33.927Z,1528899573.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:34.298Z,1528899574.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:34.316Z,1528899574.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:34.696Z,1528899574.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:34.727Z,1528899574.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:35.098Z,1528899575.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:35.116Z,1528899575.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:35.498Z,1528899575.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:35.516Z,1528899575.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:35.902Z,1528899575.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:35.924Z,1528899575.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:36.305Z,1528899576.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:36.323Z,1528899576.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:36.706Z,1528899576.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:36.748Z,1528899576.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:37.095Z,1528899577.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:37.118Z,1528899577.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:37.498Z,1528899577.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:37.516Z,1528899577.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:37.898Z,1528899577.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:37.916Z,1528899577.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:38.301Z,1528899578.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:38.324Z,1528899578.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:38.706Z,1528899578.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:38.724Z,1528899578.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:39.107Z,1528899579.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:39.125Z,1528899579.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:39.508Z,1528899579.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:39.525Z,1528899579.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:39.895Z,1528899579.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:39.919Z,1528899579.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:40.299Z,1528899580.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:40.324Z,1528899580.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:40.690Z,1528899580.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:40.714Z,1528899580.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:41.095Z,1528899581.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:41.126Z,1528899581.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:41.498Z,1528899581.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:41.517Z,1528899581.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:41.910Z,1528899581.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:41.936Z,1528899581.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:42.308Z,1528899582.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:42.326Z,1528899582.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:42.712Z,1528899582.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:42.730Z,1528899582.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:43.101Z,1528899583.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:43.119Z,1528899583.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:43.493Z,1528899583.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:43.528Z,1528899583.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:43.892Z,1528899583.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:43.921Z,1528899583.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:44.292Z,1528899584.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:44.324Z,1528899584.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:44.706Z,1528899584.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:44.731Z,1528899584.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:45.109Z,1528899585.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:45.135Z,1528899585.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:45.513Z,1528899585.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:45.530Z,1528899585.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:45.891Z,1528899585.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:45.921Z,1528899585.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:46.291Z,1528899586.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:46.322Z,1528899586.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:46.691Z,1528899586.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:46.728Z,1528899586.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:47.087Z,1528899587.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:47.131Z,1528899587.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:47.487Z,1528899587.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:47.526Z,1528899587.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:47.907Z,1528899587.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:47.928Z,1528899587.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:48.315Z,1528899588.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:48.340Z,1528899588.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:48.708Z,1528899588.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:48.727Z,1528899588.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:49.092Z,1528899589.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:49.128Z,1528899589.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:49.491Z,1528899589.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:49.519Z,1528899589.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:49.891Z,1528899589.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:49.920Z,1528899589.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:50.287Z,1528899590.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:50.323Z,1528899590.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:50.708Z,1528899590.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:50.726Z,1528899590.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:51.109Z,1528899591.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:51.127Z,1528899591.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:51.507Z,1528899591.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:51.525Z,1528899591.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:51.891Z,1528899591.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:51.919Z,1528899591.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:52.287Z,1528899592.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:52.317Z,1528899592.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:52.695Z,1528899592.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:52.728Z,1528899592.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:53.096Z,1528899593.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:53.125Z,1528899593.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:53.129Z,1528899593.129 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T14:14:53.1Z
2018-06-13T14:19:53.129Z,1528899593.129 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T14:19:53.129Z,1528899593.129 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T14:19:56.219Z,1528899596.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:56.238Z,1528899596.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:57.288Z,1528899597.288 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0252.lzma
2018-06-13T14:19:57.325Z,1528899597.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:57.344Z,1528899597.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:57.478Z,1528899597.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:57.523Z,1528899597.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:57.842Z,1528899597.842 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0252.lzma.bak
2018-06-13T14:19:57.842Z,1528899597.842 [DataOverHttps](INFO): SBD MOMSN=8329368
2018-06-13T14:19:57.898Z,1528899597.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:57.932Z,1528899597.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:59.784Z,1528899599.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:59.819Z,1528899599.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:19:59.939Z,1528899599.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:19:59.976Z,1528899599.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:00.345Z,1528899600.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:00.369Z,1528899600.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:03.464Z,1528899603.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:03.482Z,1528899603.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:03.616Z,1528899603.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:03.652Z,1528899603.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:03.995Z,1528899603.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:04.027Z,1528899604.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:04.391Z,1528899604.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:04.428Z,1528899604.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:04.795Z,1528899604.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:04.832Z,1528899604.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:05.196Z,1528899605.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:05.238Z,1528899605.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:08.314Z,1528899608.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:08.332Z,1528899608.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:08.419Z,1528899608.419 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0253.lzma
2018-06-13T14:20:08.472Z,1528899608.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:08.521Z,1528899608.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:08.865Z,1528899608.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:08.883Z,1528899608.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:09.218Z,1528899609.218 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0253.lzma.bak
2018-06-13T14:20:09.218Z,1528899609.218 [DataOverHttps](INFO): SBD MOMSN=8329370
2018-06-13T14:20:09.262Z,1528899609.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:09.303Z,1528899609.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:11.180Z,1528899611.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:11.198Z,1528899611.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:11.201Z,1528899611.201 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T14:20:11.201Z,1528899611.201 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T14:20:11.202Z,1528899611.202 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T14:20:11.311Z,1528899611.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:11.342Z,1528899611.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:14.449Z,1528899614.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:14.489Z,1528899614.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:14.618Z,1528899614.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:14.652Z,1528899614.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:15.025Z,1528899615.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:15.044Z,1528899615.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:15.405Z,1528899615.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:15.440Z,1528899615.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:15.800Z,1528899615.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:15.835Z,1528899615.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:16.206Z,1528899616.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:16.223Z,1528899616.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:16.607Z,1528899616.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:16.626Z,1528899616.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:17.015Z,1528899617.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:17.032Z,1528899617.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:17.418Z,1528899617.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:17.436Z,1528899617.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:17.818Z,1528899617.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:17.836Z,1528899617.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:18.204Z,1528899618.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:18.236Z,1528899618.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:18.608Z,1528899618.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:18.644Z,1528899618.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:19.007Z,1528899619.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:19.025Z,1528899619.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:19.403Z,1528899619.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:19.427Z,1528899619.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:19.818Z,1528899619.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:19.837Z,1528899619.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:20.220Z,1528899620.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:20.244Z,1528899620.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:20.616Z,1528899620.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:20.634Z,1528899620.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:21.007Z,1528899621.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:21.031Z,1528899621.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:21.417Z,1528899621.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:21.471Z,1528899621.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:21.810Z,1528899621.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:21.828Z,1528899621.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:22.207Z,1528899622.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:22.232Z,1528899622.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:22.611Z,1528899622.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:22.629Z,1528899622.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:23.016Z,1528899623.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:23.034Z,1528899623.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:23.418Z,1528899623.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:23.437Z,1528899623.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:23.819Z,1528899623.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:23.837Z,1528899623.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:24.203Z,1528899624.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:24.227Z,1528899624.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:24.607Z,1528899624.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:24.631Z,1528899624.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:25.011Z,1528899625.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:25.028Z,1528899625.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:25.407Z,1528899625.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:25.431Z,1528899625.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:25.819Z,1528899625.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:25.837Z,1528899625.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:26.220Z,1528899626.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:26.237Z,1528899626.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:26.616Z,1528899626.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:26.634Z,1528899626.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:27.055Z,1528899627.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:27.138Z,1528899627.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:27.401Z,1528899627.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:27.481Z,1528899627.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:27.800Z,1528899627.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:27.877Z,1528899627.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:28.206Z,1528899628.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:28.382Z,1528899628.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:28.600Z,1528899628.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:28.672Z,1528899628.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:29.020Z,1528899629.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:29.038Z,1528899629.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:29.422Z,1528899629.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:29.448Z,1528899629.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:29.821Z,1528899629.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:29.838Z,1528899629.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:30.204Z,1528899630.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:30.236Z,1528899630.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:30.603Z,1528899630.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:30.635Z,1528899630.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:31.004Z,1528899631.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:31.035Z,1528899631.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:31.401Z,1528899631.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:31.441Z,1528899631.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:31.818Z,1528899631.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:31.842Z,1528899631.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:32.221Z,1528899632.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:32.239Z,1528899632.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:32.621Z,1528899632.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:32.644Z,1528899632.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:33.003Z,1528899633.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:33.039Z,1528899633.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:33.403Z,1528899633.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:33.437Z,1528899633.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:33.804Z,1528899633.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:33.836Z,1528899633.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:34.206Z,1528899634.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:34.243Z,1528899634.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:34.599Z,1528899634.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:34.638Z,1528899634.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:35.024Z,1528899635.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:35.042Z,1528899635.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:35.428Z,1528899635.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:35.446Z,1528899635.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:35.824Z,1528899635.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:35.842Z,1528899635.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:36.200Z,1528899636.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:36.240Z,1528899636.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:36.604Z,1528899636.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:36.642Z,1528899636.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:37.005Z,1528899637.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:37.046Z,1528899637.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:37.404Z,1528899637.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:37.422Z,1528899637.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:37.818Z,1528899637.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:37.851Z,1528899637.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:38.222Z,1528899638.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:38.256Z,1528899638.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:38.618Z,1528899638.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:38.652Z,1528899638.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:39.008Z,1528899639.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:39.026Z,1528899639.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:39.406Z,1528899639.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:39.424Z,1528899639.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:39.807Z,1528899639.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:39.826Z,1528899639.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:40.207Z,1528899640.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:40.225Z,1528899640.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:40.607Z,1528899640.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:40.624Z,1528899640.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:41.018Z,1528899641.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:41.056Z,1528899641.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:41.417Z,1528899641.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:41.435Z,1528899641.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:41.817Z,1528899641.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:41.860Z,1528899641.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:42.209Z,1528899642.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:42.227Z,1528899642.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:42.608Z,1528899642.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:42.626Z,1528899642.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:43.008Z,1528899643.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:43.042Z,1528899643.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:43.410Z,1528899643.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:43.432Z,1528899643.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:43.818Z,1528899643.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:43.840Z,1528899643.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:44.218Z,1528899644.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:44.240Z,1528899644.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:44.618Z,1528899644.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:44.636Z,1528899644.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:45.007Z,1528899645.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:45.031Z,1528899645.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:45.410Z,1528899645.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:45.432Z,1528899645.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:45.810Z,1528899645.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:45.828Z,1528899645.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:46.207Z,1528899646.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:46.234Z,1528899646.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:46.607Z,1528899646.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:46.632Z,1528899646.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:47.019Z,1528899647.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:47.044Z,1528899647.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:47.418Z,1528899647.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:47.436Z,1528899647.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:47.818Z,1528899647.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:47.859Z,1528899647.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:48.210Z,1528899648.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:48.232Z,1528899648.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:48.614Z,1528899648.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:48.632Z,1528899648.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:49.006Z,1528899649.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:49.033Z,1528899649.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:49.410Z,1528899649.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:49.432Z,1528899649.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:49.818Z,1528899649.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:49.840Z,1528899649.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:50.222Z,1528899650.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:50.246Z,1528899650.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:50.623Z,1528899650.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:50.641Z,1528899650.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:51.007Z,1528899651.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:51.032Z,1528899651.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:51.446Z,1528899651.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:51.476Z,1528899651.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:51.800Z,1528899651.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:51.832Z,1528899651.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:52.208Z,1528899652.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:52.234Z,1528899652.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:52.614Z,1528899652.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:52.633Z,1528899652.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:53.020Z,1528899653.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:53.038Z,1528899653.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:53.423Z,1528899653.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:53.441Z,1528899653.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:53.822Z,1528899653.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:53.851Z,1528899653.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:54.212Z,1528899654.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:54.230Z,1528899654.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:54.607Z,1528899654.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:54.641Z,1528899654.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:55.016Z,1528899655.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:55.034Z,1528899655.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:55.404Z,1528899655.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:55.434Z,1528899655.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:55.820Z,1528899655.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:55.839Z,1528899655.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:56.222Z,1528899656.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:56.255Z,1528899656.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:56.620Z,1528899656.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:56.639Z,1528899656.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:57.003Z,1528899657.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:57.040Z,1528899657.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:57.404Z,1528899657.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:57.435Z,1528899657.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:57.800Z,1528899657.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:57.827Z,1528899657.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:58.217Z,1528899658.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:58.236Z,1528899658.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:58.615Z,1528899658.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:58.633Z,1528899658.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:59.017Z,1528899659.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:59.035Z,1528899659.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:59.423Z,1528899659.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:59.442Z,1528899659.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:20:59.827Z,1528899659.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:20:59.845Z,1528899659.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:00.216Z,1528899660.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:00.234Z,1528899660.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:00.614Z,1528899660.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:00.636Z,1528899660.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:01.004Z,1528899661.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:01.034Z,1528899661.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:01.414Z,1528899661.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:01.432Z,1528899661.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:01.823Z,1528899661.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:01.841Z,1528899661.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:02.222Z,1528899662.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:02.256Z,1528899662.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:02.614Z,1528899662.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:02.638Z,1528899662.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:03.010Z,1528899663.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:03.034Z,1528899663.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:03.413Z,1528899663.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:03.436Z,1528899663.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:03.800Z,1528899663.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:03.827Z,1528899663.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:04.212Z,1528899664.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:04.239Z,1528899664.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:04.611Z,1528899664.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:04.641Z,1528899664.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:05.028Z,1528899665.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:05.046Z,1528899665.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:05.423Z,1528899665.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:05.441Z,1528899665.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:05.824Z,1528899665.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:05.843Z,1528899665.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:06.206Z,1528899666.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:06.234Z,1528899666.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:06.605Z,1528899666.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:06.639Z,1528899666.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:07.018Z,1528899667.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:07.036Z,1528899667.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:07.399Z,1528899667.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:07.435Z,1528899667.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:07.819Z,1528899667.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:07.843Z,1528899667.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:08.228Z,1528899668.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:08.246Z,1528899668.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:08.623Z,1528899668.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:08.641Z,1528899668.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:09.003Z,1528899669.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:09.032Z,1528899669.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:09.407Z,1528899669.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:09.436Z,1528899669.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:09.804Z,1528899669.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:09.840Z,1528899669.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:10.208Z,1528899670.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:10.243Z,1528899670.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:10.604Z,1528899670.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:10.646Z,1528899670.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:11.023Z,1528899671.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:11.049Z,1528899671.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:11.428Z,1528899671.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:11.445Z,1528899671.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:11.832Z,1528899671.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:11.850Z,1528899671.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:14.917Z,1528899674.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:14.936Z,1528899674.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:15.050Z,1528899675.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:15.077Z,1528899675.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:15.468Z,1528899675.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:15.486Z,1528899675.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:15.864Z,1528899675.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:15.882Z,1528899675.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:16.253Z,1528899676.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:16.288Z,1528899676.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:16.643Z,1528899676.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:16.674Z,1528899676.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:17.040Z,1528899677.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:17.080Z,1528899677.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:17.443Z,1528899677.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:17.460Z,1528899677.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:17.858Z,1528899677.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:17.883Z,1528899677.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:18.262Z,1528899678.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:18.288Z,1528899678.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:18.657Z,1528899678.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:18.683Z,1528899678.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:19.046Z,1528899679.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:19.087Z,1528899679.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:19.443Z,1528899679.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:19.461Z,1528899679.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:19.844Z,1528899679.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:19.880Z,1528899679.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:20.247Z,1528899680.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:20.265Z,1528899680.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:20.651Z,1528899680.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:20.669Z,1528899680.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:21.054Z,1528899681.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:21.072Z,1528899681.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:21.458Z,1528899681.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:21.476Z,1528899681.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:21.854Z,1528899681.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:21.872Z,1528899681.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:22.250Z,1528899682.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:22.269Z,1528899682.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:22.650Z,1528899682.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:22.672Z,1528899682.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:23.049Z,1528899683.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:23.068Z,1528899683.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:23.448Z,1528899683.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:23.467Z,1528899683.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:23.861Z,1528899683.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:23.896Z,1528899683.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:24.257Z,1528899684.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:24.276Z,1528899684.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:24.653Z,1528899684.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:24.672Z,1528899684.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:25.050Z,1528899685.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:25.068Z,1528899685.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:25.450Z,1528899685.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:25.468Z,1528899685.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:25.850Z,1528899685.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:25.868Z,1528899685.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:26.248Z,1528899686.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:26.285Z,1528899686.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:26.643Z,1528899686.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:26.666Z,1528899686.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:27.061Z,1528899687.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:27.079Z,1528899687.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:27.457Z,1528899687.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:27.483Z,1528899687.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:27.858Z,1528899687.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:27.876Z,1528899687.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:28.247Z,1528899688.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:28.279Z,1528899688.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:28.646Z,1528899688.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:28.680Z,1528899688.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:29.050Z,1528899689.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:29.068Z,1528899689.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:29.450Z,1528899689.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:29.467Z,1528899689.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:29.859Z,1528899689.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:29.877Z,1528899689.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:30.259Z,1528899690.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:30.277Z,1528899690.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:30.658Z,1528899690.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:30.680Z,1528899690.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:31.047Z,1528899691.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:31.072Z,1528899691.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:31.443Z,1528899691.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:31.468Z,1528899691.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:31.850Z,1528899691.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:31.882Z,1528899691.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:32.256Z,1528899692.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:32.274Z,1528899692.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:32.654Z,1528899692.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:32.672Z,1528899692.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:33.059Z,1528899693.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:33.077Z,1528899693.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:33.461Z,1528899693.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:33.479Z,1528899693.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:33.859Z,1528899693.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:33.877Z,1528899693.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:34.255Z,1528899694.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:34.280Z,1528899694.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:34.647Z,1528899694.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:34.672Z,1528899694.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:35.046Z,1528899695.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:35.084Z,1528899695.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:35.454Z,1528899695.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:35.471Z,1528899695.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:35.864Z,1528899695.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:35.882Z,1528899695.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:36.264Z,1528899696.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:36.282Z,1528899696.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:36.659Z,1528899696.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:36.686Z,1528899696.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:37.054Z,1528899697.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:37.085Z,1528899697.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:37.447Z,1528899697.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:37.480Z,1528899697.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:37.843Z,1528899697.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:37.870Z,1528899697.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:38.246Z,1528899698.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:38.278Z,1528899698.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:38.641Z,1528899698.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:38.668Z,1528899698.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:39.067Z,1528899699.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:39.086Z,1528899699.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:39.468Z,1528899699.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:39.487Z,1528899699.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:39.862Z,1528899699.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:39.879Z,1528899699.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:40.244Z,1528899700.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:40.279Z,1528899700.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:40.648Z,1528899700.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:40.676Z,1528899700.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:41.044Z,1528899701.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:41.080Z,1528899701.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:41.444Z,1528899701.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:41.486Z,1528899701.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:41.862Z,1528899701.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:41.895Z,1528899701.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:42.263Z,1528899702.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:42.281Z,1528899702.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:42.663Z,1528899702.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:42.681Z,1528899702.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:43.043Z,1528899703.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:43.085Z,1528899703.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:43.441Z,1528899703.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:43.476Z,1528899703.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:43.849Z,1528899703.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:43.884Z,1528899703.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:43.884Z,1528899703.884 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 218
2018-06-13T14:21:43.884Z,1528899703.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:21:43.886Z,1528899703.886 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:43.886Z,1528899703.886 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 218
2018-06-13T14:21:43.886Z,1528899703.886 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:21:43.888Z,1528899703.888 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:43.888Z,1528899703.888 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 218
2018-06-13T14:21:43.888Z,1528899703.888 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:21:43.961Z,1528899703.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:21:43.961Z,1528899703.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:21:43.962Z,1528899703.962 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:21:44.255Z,1528899704.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:44.370Z,1528899704.370 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:21:44.370Z,1528899704.370 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 218
2018-06-13T14:21:44.371Z,1528899704.371 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:21:44.371Z,1528899704.371 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 218
2018-06-13T14:21:44.371Z,1528899704.371 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:21:44.371Z,1528899704.371 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 218
2018-06-13T14:21:44.646Z,1528899704.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:44.680Z,1528899704.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:21:44.680Z,1528899704.680 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:21:44.680Z,1528899704.680 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:21:44.685Z,1528899704.685 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:21:44.685Z,1528899704.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:21:44.686Z,1528899704.686 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:21:44.686Z,1528899704.686 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:21:44.687Z,1528899704.687 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:21:44.687Z,1528899704.687 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:21:45.059Z,1528899705.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:45.092Z,1528899705.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:21:45.093Z,1528899705.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:45.461Z,1528899705.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:45.488Z,1528899705.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:21:45.489Z,1528899705.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:45.861Z,1528899705.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:45.887Z,1528899705.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:21:45.888Z,1528899705.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:46.246Z,1528899706.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:46.292Z,1528899706.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:21:46.293Z,1528899706.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:46.649Z,1528899706.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:46.691Z,1528899706.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:21:46.692Z,1528899706.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:47.056Z,1528899707.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:47.089Z,1528899707.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:21:47.090Z,1528899707.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:47.449Z,1528899707.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:47.466Z,1528899707.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:21:47.467Z,1528899707.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:47.861Z,1528899707.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:47.889Z,1528899707.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:21:47.890Z,1528899707.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:48.260Z,1528899708.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:48.289Z,1528899708.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:21:48.290Z,1528899708.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:48.658Z,1528899708.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:48.689Z,1528899708.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:21:48.690Z,1528899708.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:49.050Z,1528899709.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:49.090Z,1528899709.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:21:49.091Z,1528899709.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:49.446Z,1528899709.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:49.491Z,1528899709.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:21:49.492Z,1528899709.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:49.847Z,1528899709.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:49.868Z,1528899709.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:21:49.881Z,1528899709.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:50.249Z,1528899710.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:50.267Z,1528899710.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:21:50.268Z,1528899710.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:50.648Z,1528899710.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:50.678Z,1528899710.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:21:50.679Z,1528899710.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:51.053Z,1528899711.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:51.103Z,1528899711.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:21:51.104Z,1528899711.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:51.460Z,1528899711.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:51.496Z,1528899711.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:21:51.497Z,1528899711.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:51.856Z,1528899711.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:51.874Z,1528899711.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:21:51.875Z,1528899711.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:52.249Z,1528899712.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:52.273Z,1528899712.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:21:52.274Z,1528899712.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:52.642Z,1528899712.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:52.687Z,1528899712.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:21:52.688Z,1528899712.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:53.042Z,1528899713.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:53.080Z,1528899713.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:21:53.085Z,1528899713.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:53.450Z,1528899713.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:53.473Z,1528899713.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:21:53.474Z,1528899713.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:53.858Z,1528899713.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:53.876Z,1528899713.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:21:53.877Z,1528899713.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:54.257Z,1528899714.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:54.303Z,1528899714.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:21:54.304Z,1528899714.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:54.656Z,1528899714.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:54.703Z,1528899714.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:21:54.704Z,1528899714.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:55.052Z,1528899715.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:55.084Z,1528899715.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:21:55.093Z,1528899715.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:55.445Z,1528899715.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:55.478Z,1528899715.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:21:55.479Z,1528899715.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:55.855Z,1528899715.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:55.902Z,1528899715.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:21:55.903Z,1528899715.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:56.259Z,1528899716.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:56.279Z,1528899716.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:21:56.280Z,1528899716.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:56.657Z,1528899716.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:56.674Z,1528899716.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:21:56.675Z,1528899716.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:57.049Z,1528899717.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:57.075Z,1528899717.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:21:57.076Z,1528899717.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:57.443Z,1528899717.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:57.497Z,1528899717.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:21:57.498Z,1528899717.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:57.861Z,1528899717.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:57.881Z,1528899717.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:21:57.882Z,1528899717.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:58.262Z,1528899718.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:58.284Z,1528899718.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:21:58.305Z,1528899718.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:58.663Z,1528899718.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:58.681Z,1528899718.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:21:58.682Z,1528899718.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:59.051Z,1528899719.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:59.088Z,1528899719.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:21:59.088Z,1528899719.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:59.450Z,1528899719.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:59.473Z,1528899719.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:21:59.474Z,1528899719.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:21:59.862Z,1528899719.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:21:59.879Z,1528899719.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:21:59.880Z,1528899719.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:00.261Z,1528899720.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:00.299Z,1528899720.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:22:00.300Z,1528899720.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:00.659Z,1528899720.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:00.702Z,1528899720.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:22:00.703Z,1528899720.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:01.051Z,1528899721.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:01.074Z,1528899721.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:22:01.075Z,1528899721.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:01.443Z,1528899721.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:01.471Z,1528899721.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:22:01.472Z,1528899721.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:01.860Z,1528899721.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:01.895Z,1528899721.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:22:01.896Z,1528899721.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:02.264Z,1528899722.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:02.311Z,1528899722.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:22:02.312Z,1528899722.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:02.660Z,1528899722.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:02.682Z,1528899722.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:22:02.683Z,1528899722.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:03.047Z,1528899723.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:03.083Z,1528899723.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:22:03.084Z,1528899723.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:03.448Z,1528899723.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:03.477Z,1528899723.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:22:03.478Z,1528899723.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:03.860Z,1528899723.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:03.903Z,1528899723.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:04.263Z,1528899724.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:04.286Z,1528899724.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:04.666Z,1528899724.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:04.685Z,1528899724.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:05.052Z,1528899725.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:05.073Z,1528899725.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:05.446Z,1528899725.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:05.502Z,1528899725.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:05.864Z,1528899725.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:05.886Z,1528899725.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:06.259Z,1528899726.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:06.283Z,1528899726.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:06.662Z,1528899726.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:06.679Z,1528899726.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:07.052Z,1528899727.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:07.107Z,1528899727.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:07.449Z,1528899727.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:07.472Z,1528899727.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:07.859Z,1528899727.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:07.882Z,1528899727.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:08.267Z,1528899728.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:08.286Z,1528899728.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:08.660Z,1528899728.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:08.705Z,1528899728.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:09.050Z,1528899729.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:09.072Z,1528899729.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:09.447Z,1528899729.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:09.478Z,1528899729.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:09.860Z,1528899729.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:09.881Z,1528899729.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:10.264Z,1528899730.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:10.312Z,1528899730.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:10.663Z,1528899730.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:10.707Z,1528899730.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:11.051Z,1528899731.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:11.071Z,1528899731.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:11.450Z,1528899731.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:11.476Z,1528899731.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:11.864Z,1528899731.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:11.883Z,1528899731.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:14.965Z,1528899734.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:14.983Z,1528899734.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:15.134Z,1528899735.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:15.158Z,1528899735.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:15.516Z,1528899735.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:15.534Z,1528899735.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:15.919Z,1528899735.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:15.964Z,1528899735.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:16.314Z,1528899736.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:16.331Z,1528899736.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:16.715Z,1528899736.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:16.745Z,1528899736.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:17.119Z,1528899737.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:17.142Z,1528899737.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:17.525Z,1528899737.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:17.543Z,1528899737.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:17.921Z,1528899737.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:17.939Z,1528899737.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:18.309Z,1528899738.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:18.334Z,1528899738.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:18.718Z,1528899738.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:18.735Z,1528899738.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:19.118Z,1528899739.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:19.137Z,1528899739.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:19.511Z,1528899739.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:19.535Z,1528899739.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:19.923Z,1528899739.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:19.942Z,1528899739.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:20.323Z,1528899740.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:20.341Z,1528899740.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:20.722Z,1528899740.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:20.739Z,1528899740.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:21.118Z,1528899741.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:21.136Z,1528899741.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:21.518Z,1528899741.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:21.536Z,1528899741.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:21.911Z,1528899741.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:21.953Z,1528899741.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:22.316Z,1528899742.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:22.335Z,1528899742.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:22.717Z,1528899742.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:22.736Z,1528899742.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:23.118Z,1528899743.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:23.141Z,1528899743.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:23.525Z,1528899743.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:23.548Z,1528899743.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:23.923Z,1528899743.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:23.948Z,1528899743.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:24.317Z,1528899744.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:24.335Z,1528899744.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:24.712Z,1528899744.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:24.739Z,1528899744.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:25.119Z,1528899745.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:25.137Z,1528899745.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:25.512Z,1528899745.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:25.530Z,1528899745.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:25.922Z,1528899745.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:25.941Z,1528899745.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:26.323Z,1528899746.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:26.341Z,1528899746.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:26.720Z,1528899746.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:26.742Z,1528899746.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:27.116Z,1528899747.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:27.134Z,1528899747.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:27.509Z,1528899747.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:27.538Z,1528899747.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:27.922Z,1528899747.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:27.946Z,1528899747.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:28.327Z,1528899748.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:28.356Z,1528899748.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:28.723Z,1528899748.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:28.752Z,1528899748.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:29.107Z,1528899749.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:29.139Z,1528899749.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:29.507Z,1528899749.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:29.544Z,1528899749.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:29.926Z,1528899749.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:29.948Z,1528899749.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:30.323Z,1528899750.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:30.346Z,1528899750.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:30.728Z,1528899750.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:30.746Z,1528899750.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:31.104Z,1528899751.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:31.144Z,1528899751.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:31.507Z,1528899751.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:31.539Z,1528899751.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:31.926Z,1528899751.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:31.944Z,1528899751.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:32.324Z,1528899752.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:32.342Z,1528899752.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:32.714Z,1528899752.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:32.748Z,1528899752.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:33.108Z,1528899753.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:33.150Z,1528899753.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:33.510Z,1528899753.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:33.540Z,1528899753.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:33.922Z,1528899753.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:33.947Z,1528899753.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:34.328Z,1528899754.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:34.353Z,1528899754.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:34.728Z,1528899754.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:34.746Z,1528899754.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:35.104Z,1528899755.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:35.138Z,1528899755.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:35.509Z,1528899755.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:35.538Z,1528899755.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:35.925Z,1528899755.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:35.948Z,1528899755.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:36.326Z,1528899756.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:36.350Z,1528899756.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:36.726Z,1528899756.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:36.744Z,1528899756.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:37.106Z,1528899757.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:37.140Z,1528899757.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:37.507Z,1528899757.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:37.544Z,1528899757.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:37.926Z,1528899757.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:37.950Z,1528899757.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:38.326Z,1528899758.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:38.344Z,1528899758.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:38.726Z,1528899758.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:38.743Z,1528899758.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:39.108Z,1528899759.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:39.143Z,1528899759.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:39.507Z,1528899759.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:39.545Z,1528899759.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:39.926Z,1528899759.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:39.948Z,1528899759.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:40.330Z,1528899760.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:40.348Z,1528899760.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:40.724Z,1528899760.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:40.760Z,1528899760.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:41.107Z,1528899761.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:41.147Z,1528899761.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:41.507Z,1528899761.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:41.547Z,1528899761.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:41.930Z,1528899761.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:41.952Z,1528899761.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:42.328Z,1528899762.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:42.364Z,1528899762.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:42.729Z,1528899762.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:42.768Z,1528899762.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:43.109Z,1528899763.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:43.142Z,1528899763.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:43.507Z,1528899763.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:43.540Z,1528899763.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:43.924Z,1528899763.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:43.960Z,1528899763.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:44.328Z,1528899764.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:44.350Z,1528899764.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:44.729Z,1528899764.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:44.747Z,1528899764.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:45.108Z,1528899765.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:45.142Z,1528899765.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:45.503Z,1528899765.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:45.553Z,1528899765.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:45.928Z,1528899765.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:45.951Z,1528899765.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:46.330Z,1528899766.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:46.354Z,1528899766.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:46.732Z,1528899766.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:46.756Z,1528899766.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:47.108Z,1528899767.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:47.153Z,1528899767.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:47.507Z,1528899767.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:47.546Z,1528899767.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:47.938Z,1528899767.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:47.956Z,1528899767.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:48.319Z,1528899768.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:48.349Z,1528899768.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:48.717Z,1528899768.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:48.764Z,1528899768.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:49.108Z,1528899769.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:49.139Z,1528899769.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:49.507Z,1528899769.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:49.525Z,1528899769.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:49.923Z,1528899769.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:49.953Z,1528899769.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:50.325Z,1528899770.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:50.367Z,1528899770.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:50.725Z,1528899770.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:50.757Z,1528899770.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:51.111Z,1528899771.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:51.128Z,1528899771.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:51.510Z,1528899771.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:51.533Z,1528899771.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:51.922Z,1528899771.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:51.963Z,1528899771.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:52.321Z,1528899772.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:52.360Z,1528899772.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:52.721Z,1528899772.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:52.767Z,1528899772.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:53.113Z,1528899773.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:53.136Z,1528899773.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:53.513Z,1528899773.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:53.530Z,1528899773.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:53.921Z,1528899773.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:53.940Z,1528899773.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:54.321Z,1528899774.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:54.344Z,1528899774.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:54.721Z,1528899774.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:54.744Z,1528899774.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:55.115Z,1528899775.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:55.133Z,1528899775.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:55.513Z,1528899775.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:55.531Z,1528899775.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:55.918Z,1528899775.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:55.936Z,1528899775.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:56.321Z,1528899776.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:56.344Z,1528899776.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:56.719Z,1528899776.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:56.737Z,1528899776.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:57.111Z,1528899777.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:57.143Z,1528899777.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:57.511Z,1528899777.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:57.537Z,1528899777.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:57.919Z,1528899777.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:57.942Z,1528899777.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:58.321Z,1528899778.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:58.339Z,1528899778.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:58.721Z,1528899778.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:58.740Z,1528899778.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:59.118Z,1528899779.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:59.135Z,1528899779.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:59.515Z,1528899779.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:59.534Z,1528899779.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:22:59.921Z,1528899779.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:22:59.939Z,1528899779.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:00.321Z,1528899780.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:00.339Z,1528899780.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:00.719Z,1528899780.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:00.736Z,1528899780.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:01.115Z,1528899781.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:01.132Z,1528899781.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:01.506Z,1528899781.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:01.543Z,1528899781.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:01.923Z,1528899781.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:01.941Z,1528899781.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:02.328Z,1528899782.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:02.379Z,1528899782.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:02.716Z,1528899782.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:02.756Z,1528899782.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:03.108Z,1528899783.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:03.144Z,1528899783.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:03.507Z,1528899783.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:03.547Z,1528899783.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:03.916Z,1528899783.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:03.943Z,1528899783.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:04.327Z,1528899784.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:04.351Z,1528899784.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:04.728Z,1528899784.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:04.746Z,1528899784.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:05.104Z,1528899785.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:05.140Z,1528899785.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:05.507Z,1528899785.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:05.543Z,1528899785.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:05.928Z,1528899785.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:05.951Z,1528899785.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:06.328Z,1528899786.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:06.346Z,1528899786.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:06.723Z,1528899786.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:06.741Z,1528899786.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:07.108Z,1528899787.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:07.146Z,1528899787.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:07.503Z,1528899787.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:07.543Z,1528899787.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:07.917Z,1528899787.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:07.944Z,1528899787.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:08.317Z,1528899788.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:08.358Z,1528899788.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:08.713Z,1528899788.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:08.747Z,1528899788.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:09.107Z,1528899789.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:09.140Z,1528899789.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:09.508Z,1528899789.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:09.548Z,1528899789.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:09.903Z,1528899789.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:09.921Z,1528899789.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:10.317Z,1528899790.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:10.356Z,1528899790.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:10.721Z,1528899790.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:10.750Z,1528899790.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:11.114Z,1528899791.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:11.152Z,1528899791.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:11.511Z,1528899791.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:11.545Z,1528899791.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:11.912Z,1528899791.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:11.930Z,1528899791.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:15.030Z,1528899795.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:15.057Z,1528899795.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:15.177Z,1528899795.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:15.206Z,1528899795.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:15.596Z,1528899795.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:15.615Z,1528899795.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:15.994Z,1528899795.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:16.019Z,1528899796.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:16.384Z,1528899796.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:16.415Z,1528899796.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:16.772Z,1528899796.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:16.806Z,1528899796.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:17.178Z,1528899797.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:17.212Z,1528899797.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:17.571Z,1528899797.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:17.616Z,1528899797.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:17.986Z,1528899797.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:18.030Z,1528899798.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:18.383Z,1528899798.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:18.411Z,1528899798.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:18.783Z,1528899798.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:18.810Z,1528899798.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:19.172Z,1528899799.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:19.223Z,1528899799.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:19.571Z,1528899799.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:19.607Z,1528899799.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:19.984Z,1528899799.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:20.013Z,1528899800.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:20.387Z,1528899800.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:20.416Z,1528899800.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:20.781Z,1528899800.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:20.820Z,1528899800.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:21.172Z,1528899801.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:21.206Z,1528899801.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:21.571Z,1528899801.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:21.594Z,1528899801.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:21.983Z,1528899801.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:22.018Z,1528899802.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:22.385Z,1528899802.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:22.427Z,1528899802.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:22.785Z,1528899802.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:22.824Z,1528899802.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:23.176Z,1528899803.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:23.199Z,1528899803.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:23.578Z,1528899803.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:23.597Z,1528899803.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:23.985Z,1528899803.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:24.031Z,1528899804.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:24.385Z,1528899804.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:24.408Z,1528899804.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:24.782Z,1528899804.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:24.804Z,1528899804.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:25.177Z,1528899805.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:25.210Z,1528899805.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:25.576Z,1528899805.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:25.625Z,1528899805.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:25.984Z,1528899805.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:26.008Z,1528899806.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:26.387Z,1528899806.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:26.408Z,1528899806.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:26.786Z,1528899806.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:26.804Z,1528899806.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:27.175Z,1528899807.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:27.225Z,1528899807.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:27.578Z,1528899807.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:27.605Z,1528899807.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:27.983Z,1528899807.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:28.007Z,1528899808.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:28.387Z,1528899808.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:28.405Z,1528899808.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:28.789Z,1528899808.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:28.835Z,1528899808.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:29.178Z,1528899809.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:29.196Z,1528899809.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:29.575Z,1528899809.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:29.608Z,1528899809.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:29.990Z,1528899809.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:30.009Z,1528899810.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:30.387Z,1528899810.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:30.435Z,1528899810.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:30.788Z,1528899810.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:30.831Z,1528899810.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:31.178Z,1528899811.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:31.212Z,1528899811.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:31.567Z,1528899811.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:31.601Z,1528899811.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:31.988Z,1528899811.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:32.006Z,1528899812.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:32.391Z,1528899812.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:32.414Z,1528899812.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:32.783Z,1528899812.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:32.808Z,1528899812.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:33.175Z,1528899813.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:33.224Z,1528899813.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:33.575Z,1528899813.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:33.601Z,1528899813.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:33.987Z,1528899813.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:34.007Z,1528899814.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:34.387Z,1528899814.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:34.411Z,1528899814.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:34.794Z,1528899814.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:34.816Z,1528899814.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:35.168Z,1528899815.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:35.212Z,1528899815.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:35.571Z,1528899815.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:35.606Z,1528899815.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:35.992Z,1528899815.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:36.020Z,1528899816.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:36.392Z,1528899816.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:36.414Z,1528899816.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:36.787Z,1528899816.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:36.846Z,1528899816.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:37.172Z,1528899817.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:37.201Z,1528899817.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:37.571Z,1528899817.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:37.599Z,1528899817.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:37.987Z,1528899817.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:38.010Z,1528899818.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:38.392Z,1528899818.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:38.416Z,1528899818.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:38.783Z,1528899818.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:38.801Z,1528899818.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:39.171Z,1528899819.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:39.199Z,1528899819.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:39.571Z,1528899819.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:39.618Z,1528899819.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:39.988Z,1528899819.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:40.006Z,1528899820.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:40.391Z,1528899820.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:40.409Z,1528899820.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:40.792Z,1528899820.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:40.820Z,1528899820.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:41.172Z,1528899821.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:41.208Z,1528899821.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:41.571Z,1528899821.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:41.603Z,1528899821.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:41.992Z,1528899821.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:42.016Z,1528899822.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:42.386Z,1528899822.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:42.412Z,1528899822.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:42.786Z,1528899822.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:42.814Z,1528899822.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:43.172Z,1528899823.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:43.212Z,1528899823.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:43.571Z,1528899823.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:43.605Z,1528899823.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:43.981Z,1528899823.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:44.024Z,1528899824.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:44.386Z,1528899824.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:44.420Z,1528899824.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:44.781Z,1528899824.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:44.816Z,1528899824.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:45.175Z,1528899825.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:45.209Z,1528899825.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:45.571Z,1528899825.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:45.589Z,1528899825.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:45.985Z,1528899825.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:46.019Z,1528899826.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:46.389Z,1528899826.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:46.427Z,1528899826.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:46.785Z,1528899826.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:46.803Z,1528899826.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:47.180Z,1528899827.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:47.198Z,1528899827.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:47.577Z,1528899827.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:47.595Z,1528899827.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:47.986Z,1528899827.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:48.004Z,1528899828.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:48.383Z,1528899828.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:48.400Z,1528899828.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:48.786Z,1528899828.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:48.804Z,1528899828.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:49.182Z,1528899829.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:49.201Z,1528899829.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:49.577Z,1528899829.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:49.595Z,1528899829.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:49.987Z,1528899829.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:50.005Z,1528899830.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:50.385Z,1528899830.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:50.405Z,1528899830.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:50.783Z,1528899830.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:50.802Z,1528899830.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:51.180Z,1528899831.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:51.198Z,1528899831.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:51.579Z,1528899831.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:51.597Z,1528899831.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:51.967Z,1528899831.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:52.003Z,1528899832.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:52.387Z,1528899832.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:52.405Z,1528899832.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:52.792Z,1528899832.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:52.810Z,1528899832.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:53.188Z,1528899833.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:53.205Z,1528899833.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:53.571Z,1528899833.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:53.600Z,1528899833.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:53.971Z,1528899833.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:54.002Z,1528899834.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:54.372Z,1528899834.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:54.399Z,1528899834.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:54.771Z,1528899834.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:54.798Z,1528899834.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:55.196Z,1528899835.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:55.214Z,1528899835.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:55.590Z,1528899835.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:55.608Z,1528899835.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:55.977Z,1528899835.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:56.014Z,1528899836.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:56.371Z,1528899836.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:56.402Z,1528899836.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:56.768Z,1528899836.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:56.808Z,1528899836.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:57.175Z,1528899837.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:57.283Z,1528899837.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:57.572Z,1528899837.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:57.612Z,1528899837.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:57.971Z,1528899837.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:57.996Z,1528899837.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:58.385Z,1528899838.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:58.419Z,1528899838.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:58.786Z,1528899838.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:58.803Z,1528899838.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:59.185Z,1528899839.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:59.203Z,1528899839.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:59.574Z,1528899839.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:59.592Z,1528899839.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:23:59.973Z,1528899839.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:23:59.990Z,1528899839.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:00.373Z,1528899840.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:00.391Z,1528899840.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:00.776Z,1528899840.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:00.797Z,1528899840.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:01.155Z,1528899841.155 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T14:24:01.155Z,1528899841.155 [NAL9602] Data Fault, FailCount= 5
2018-06-13T14:24:01.155Z,1528899841.155 [NAL9602](ERROR): Data Fault
2018-06-13T14:24:01.180Z,1528899841.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:01.220Z,1528899841.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:01.305Z,1528899841.305 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T14:24:01.305Z,1528899841.305 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T14:24:01.554Z,1528899841.554 [NAL9602](INFO): Powering down
2018-06-13T14:24:01.583Z,1528899841.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:01.601Z,1528899841.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:01.675Z,1528899841.675 [CBIT](INFO): Critical error at 20180613T142401
2018-06-13T14:24:01.976Z,1528899841.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:01.993Z,1528899841.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:02.372Z,1528899842.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:02.392Z,1528899842.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:02.772Z,1528899842.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:02.796Z,1528899842.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:03.175Z,1528899843.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:03.200Z,1528899843.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:03.577Z,1528899843.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:03.594Z,1528899843.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:03.972Z,1528899843.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:03.990Z,1528899843.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:04.372Z,1528899844.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:04.389Z,1528899844.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:04.776Z,1528899844.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:04.793Z,1528899844.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:05.176Z,1528899845.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:05.194Z,1528899845.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:05.576Z,1528899845.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:05.594Z,1528899845.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:05.976Z,1528899845.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:05.993Z,1528899845.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:06.372Z,1528899846.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:06.390Z,1528899846.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:06.772Z,1528899846.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:06.796Z,1528899846.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:07.179Z,1528899847.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:07.196Z,1528899847.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:07.572Z,1528899847.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:07.590Z,1528899847.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:07.976Z,1528899847.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:07.000Z,1528899848.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:08.378Z,1528899848.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:08.395Z,1528899848.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:08.772Z,1528899848.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:08.790Z,1528899848.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:09.176Z,1528899849.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:09.194Z,1528899849.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:09.576Z,1528899849.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:09.594Z,1528899849.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:09.971Z,1528899849.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:09.990Z,1528899849.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:10.381Z,1528899850.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:10.398Z,1528899850.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:10.776Z,1528899850.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:10.800Z,1528899850.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:11.176Z,1528899851.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:11.194Z,1528899851.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:11.575Z,1528899851.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:11.593Z,1528899851.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:11.980Z,1528899851.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:11.998Z,1528899851.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:15.085Z,1528899855.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:15.103Z,1528899855.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:15.214Z,1528899855.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:15.279Z,1528899855.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:15.610Z,1528899855.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:15.639Z,1528899855.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:16.010Z,1528899856.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:16.045Z,1528899856.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:16.406Z,1528899856.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:16.451Z,1528899856.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:16.810Z,1528899856.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:16.849Z,1528899856.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:17.214Z,1528899857.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:17.253Z,1528899857.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:17.610Z,1528899857.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:17.628Z,1528899857.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:18.009Z,1528899858.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:18.027Z,1528899858.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:18.414Z,1528899858.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:18.432Z,1528899858.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:18.813Z,1528899858.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:18.830Z,1528899858.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:19.214Z,1528899859.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:19.233Z,1528899859.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:19.611Z,1528899859.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:19.630Z,1528899859.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:20.016Z,1528899860.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:20.033Z,1528899860.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:20.416Z,1528899860.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:20.440Z,1528899860.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:20.815Z,1528899860.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:20.833Z,1528899860.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:21.215Z,1528899861.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:21.234Z,1528899861.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:21.616Z,1528899861.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:21.634Z,1528899861.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:22.016Z,1528899862.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:22.034Z,1528899862.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:22.416Z,1528899862.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:22.433Z,1528899862.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:22.816Z,1528899862.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:22.834Z,1528899862.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:23.216Z,1528899863.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:23.234Z,1528899863.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:23.615Z,1528899863.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:23.633Z,1528899863.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:24.017Z,1528899864.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:24.035Z,1528899864.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:24.415Z,1528899864.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:24.434Z,1528899864.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:24.816Z,1528899864.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:24.834Z,1528899864.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:25.216Z,1528899865.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:25.234Z,1528899865.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:25.612Z,1528899865.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:25.630Z,1528899865.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:26.017Z,1528899866.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:26.035Z,1528899866.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:26.412Z,1528899866.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:26.438Z,1528899866.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:26.812Z,1528899866.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:26.831Z,1528899866.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:27.217Z,1528899867.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:27.234Z,1528899867.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:27.616Z,1528899867.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:27.634Z,1528899867.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:28.012Z,1528899868.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:28.031Z,1528899868.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:28.413Z,1528899868.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:28.431Z,1528899868.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:28.817Z,1528899868.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:28.835Z,1528899868.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:29.213Z,1528899869.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:29.231Z,1528899869.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:29.617Z,1528899869.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:29.635Z,1528899869.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:30.013Z,1528899870.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:30.031Z,1528899870.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:30.412Z,1528899870.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:30.430Z,1528899870.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:30.817Z,1528899870.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:30.835Z,1528899870.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:31.212Z,1528899871.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:31.232Z,1528899871.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:31.612Z,1528899871.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:31.631Z,1528899871.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:32.011Z,1528899872.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:32.033Z,1528899872.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:32.411Z,1528899872.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:32.430Z,1528899872.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:32.812Z,1528899872.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:32.831Z,1528899872.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:33.215Z,1528899873.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:33.233Z,1528899873.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:33.612Z,1528899873.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:33.629Z,1528899873.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:34.012Z,1528899874.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:34.030Z,1528899874.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:34.415Z,1528899874.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:34.433Z,1528899874.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:34.812Z,1528899874.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:34.830Z,1528899874.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:35.206Z,1528899875.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:35.239Z,1528899875.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:35.620Z,1528899875.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:35.637Z,1528899875.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:36.006Z,1528899876.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:36.041Z,1528899876.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:36.416Z,1528899876.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:36.434Z,1528899876.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:36.806Z,1528899876.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:36.840Z,1528899876.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:37.206Z,1528899877.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:37.233Z,1528899877.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:37.607Z,1528899877.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:37.645Z,1528899877.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:38.006Z,1528899878.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:38.039Z,1528899878.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:38.406Z,1528899878.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:38.439Z,1528899878.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:38.806Z,1528899878.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:38.844Z,1528899878.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:39.212Z,1528899879.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:39.279Z,1528899879.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:39.606Z,1528899879.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:39.644Z,1528899879.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:40.006Z,1528899880.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:40.032Z,1528899880.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:40.410Z,1528899880.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:40.449Z,1528899880.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:40.806Z,1528899880.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:40.824Z,1528899880.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:41.206Z,1528899881.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:41.244Z,1528899881.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:41.610Z,1528899881.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:41.627Z,1528899881.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:42.006Z,1528899882.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:42.023Z,1528899882.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:42.411Z,1528899882.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:42.453Z,1528899882.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:42.806Z,1528899882.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:42.823Z,1528899882.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:43.206Z,1528899883.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:43.228Z,1528899883.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:43.606Z,1528899883.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:43.624Z,1528899883.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:44.010Z,1528899884.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:44.027Z,1528899884.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:44.406Z,1528899884.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:44.424Z,1528899884.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:44.810Z,1528899884.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:44.828Z,1528899884.828 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:44.828Z,1528899884.828 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 219
2018-06-13T14:24:44.828Z,1528899884.828 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:24:44.830Z,1528899884.830 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:44.830Z,1528899884.830 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 219
2018-06-13T14:24:44.830Z,1528899884.830 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:24:44.832Z,1528899884.832 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:44.832Z,1528899884.832 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 219
2018-06-13T14:24:44.832Z,1528899884.832 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:24:44.922Z,1528899884.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:24:44.922Z,1528899884.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:24:44.922Z,1528899884.922 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:24:45.210Z,1528899885.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:45.325Z,1528899885.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:24:45.325Z,1528899885.325 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 219
2018-06-13T14:24:45.326Z,1528899885.326 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:24:45.326Z,1528899885.326 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 219
2018-06-13T14:24:45.326Z,1528899885.326 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:24:45.326Z,1528899885.326 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 219
2018-06-13T14:24:45.613Z,1528899885.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:45.629Z,1528899885.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:24:45.630Z,1528899885.630 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:24:45.630Z,1528899885.630 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:24:45.630Z,1528899885.630 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:24:45.631Z,1528899885.631 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:24:45.631Z,1528899885.631 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:24:45.631Z,1528899885.631 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:24:45.632Z,1528899885.632 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:24:45.632Z,1528899885.632 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:24:46.011Z,1528899886.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:46.029Z,1528899886.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:24:46.030Z,1528899886.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:46.422Z,1528899886.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:46.441Z,1528899886.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:24:46.442Z,1528899886.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:46.811Z,1528899886.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:46.835Z,1528899886.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:24:46.836Z,1528899886.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:47.217Z,1528899887.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:47.235Z,1528899887.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:24:47.236Z,1528899887.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:47.615Z,1528899887.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:47.631Z,1528899887.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:24:47.632Z,1528899887.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:48.012Z,1528899888.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:48.029Z,1528899888.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:24:48.030Z,1528899888.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:48.415Z,1528899888.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:48.432Z,1528899888.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:24:48.434Z,1528899888.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:48.814Z,1528899888.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:48.841Z,1528899888.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:24:48.842Z,1528899888.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:49.213Z,1528899889.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:49.235Z,1528899889.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:24:49.236Z,1528899889.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:49.616Z,1528899889.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:49.634Z,1528899889.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:24:49.635Z,1528899889.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:50.015Z,1528899890.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:50.032Z,1528899890.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:24:50.033Z,1528899890.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:50.412Z,1528899890.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:50.429Z,1528899890.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:24:50.430Z,1528899890.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:50.816Z,1528899890.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:50.834Z,1528899890.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:24:50.835Z,1528899890.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:51.217Z,1528899891.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:51.235Z,1528899891.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:24:51.236Z,1528899891.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:51.612Z,1528899891.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:51.630Z,1528899891.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:24:51.631Z,1528899891.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:52.017Z,1528899892.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:52.035Z,1528899892.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:24:52.036Z,1528899892.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:52.416Z,1528899892.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:52.433Z,1528899892.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:24:52.434Z,1528899892.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:52.812Z,1528899892.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:52.829Z,1528899892.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:24:52.830Z,1528899892.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:53.215Z,1528899893.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:53.233Z,1528899893.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:24:53.234Z,1528899893.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:53.614Z,1528899893.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:53.636Z,1528899893.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:24:53.637Z,1528899893.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:54.013Z,1528899894.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:54.030Z,1528899894.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:24:54.031Z,1528899894.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:54.415Z,1528899894.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:54.440Z,1528899894.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:24:54.441Z,1528899894.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:54.814Z,1528899894.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:54.836Z,1528899894.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:24:54.838Z,1528899894.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:55.211Z,1528899895.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:55.236Z,1528899895.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:24:55.237Z,1528899895.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:55.615Z,1528899895.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:55.632Z,1528899895.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:24:55.634Z,1528899895.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:56.015Z,1528899896.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:56.036Z,1528899896.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:24:56.038Z,1528899896.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:56.412Z,1528899896.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:56.440Z,1528899896.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:24:56.441Z,1528899896.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:56.816Z,1528899896.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:56.833Z,1528899896.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:24:56.834Z,1528899896.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:57.214Z,1528899897.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:57.245Z,1528899897.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:24:57.246Z,1528899897.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:57.611Z,1528899897.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:57.635Z,1528899897.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:24:57.636Z,1528899897.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:58.016Z,1528899898.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:58.034Z,1528899898.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:24:58.035Z,1528899898.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:58.416Z,1528899898.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:58.433Z,1528899898.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:24:58.434Z,1528899898.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:58.816Z,1528899898.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:58.833Z,1528899898.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:24:58.834Z,1528899898.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:59.209Z,1528899899.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:59.232Z,1528899899.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:24:59.233Z,1528899899.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:24:59.614Z,1528899899.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:24:59.636Z,1528899899.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:24:59.637Z,1528899899.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:00.011Z,1528899900.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:00.029Z,1528899900.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:25:00.030Z,1528899900.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:00.416Z,1528899900.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:00.433Z,1528899900.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:25:00.434Z,1528899900.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:00.814Z,1528899900.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:00.839Z,1528899900.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:25:00.840Z,1528899900.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:01.206Z,1528899901.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:01.239Z,1528899901.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:25:01.240Z,1528899901.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:01.616Z,1528899901.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:01.634Z,1528899901.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:25:01.635Z,1528899901.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:02.014Z,1528899902.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:02.036Z,1528899902.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:25:02.038Z,1528899902.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:02.406Z,1528899902.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:02.433Z,1528899902.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:25:02.434Z,1528899902.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:02.816Z,1528899902.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:02.840Z,1528899902.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:25:02.841Z,1528899902.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:03.214Z,1528899903.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:03.237Z,1528899903.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:25:03.238Z,1528899903.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:03.606Z,1528899903.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:03.641Z,1528899903.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:25:03.642Z,1528899903.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:04.017Z,1528899904.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:04.034Z,1528899904.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:25:04.035Z,1528899904.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:04.414Z,1528899904.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:04.437Z,1528899904.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:25:04.438Z,1528899904.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:04.806Z,1528899904.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:04.834Z,1528899904.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:05.214Z,1528899905.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:05.238Z,1528899905.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:05.615Z,1528899905.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:05.649Z,1528899905.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:06.006Z,1528899906.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:06.034Z,1528899906.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:06.408Z,1528899906.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:06.436Z,1528899906.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:06.820Z,1528899906.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:06.838Z,1528899906.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:07.207Z,1528899907.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:07.235Z,1528899907.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:07.607Z,1528899907.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:07.638Z,1528899907.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:08.011Z,1528899908.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:08.047Z,1528899908.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:08.407Z,1528899908.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:08.448Z,1528899908.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:08.807Z,1528899908.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:08.837Z,1528899908.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:09.211Z,1528899909.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:09.249Z,1528899909.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:09.610Z,1528899909.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:09.628Z,1528899909.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:10.006Z,1528899910.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:10.025Z,1528899910.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:10.411Z,1528899910.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:10.438Z,1528899910.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:10.810Z,1528899910.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:10.828Z,1528899910.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:11.210Z,1528899911.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:11.228Z,1528899911.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:11.613Z,1528899911.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:11.658Z,1528899911.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:11.661Z,1528899911.661 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T14:25:11.661Z,1528899911.661 [Default:CheckIn:C.Wait] Stopped
2018-06-13T14:25:11.661Z,1528899911.661 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T14:25:11.662Z,1528899911.662 [Default:CheckIn:D] Running Loop=1
2018-06-13T14:25:12.012Z,1528899912.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:12.059Z,1528899912.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:12.062Z,1528899912.062 [Default:CheckIn:D] Stopped
2018-06-13T14:25:12.062Z,1528899912.062 [Default:CheckIn:E] Running Loop=1
2018-06-13T14:25:15.138Z,1528899915.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:15.157Z,1528899915.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:15.160Z,1528899915.160 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 657.976953 min 
2018-06-13T14:25:15.160Z,1528899915.160 [Default:CheckIn:E] Stopped
2018-06-13T14:25:15.160Z,1528899915.160 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T14:25:15.160Z,1528899915.160 [Default:CheckIn] Stopped
2018-06-13T14:25:15.161Z,1528899915.161 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T14:25:15.161Z,1528899915.161 [Default:CheckIn](INFO): Running loop #64
2018-06-13T14:25:15.161Z,1528899915.161 [Default:CheckIn] Running Loop=64
2018-06-13T14:25:15.161Z,1528899915.161 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T14:25:15.161Z,1528899915.161 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T14:25:15.264Z,1528899915.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:15.300Z,1528899915.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:15.670Z,1528899915.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:15.701Z,1528899915.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:16.066Z,1528899916.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:16.101Z,1528899916.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:16.467Z,1528899916.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:16.506Z,1528899916.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:16.862Z,1528899916.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:16.880Z,1528899916.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:17.265Z,1528899917.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:17.283Z,1528899917.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:17.665Z,1528899917.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:17.688Z,1528899917.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:18.070Z,1528899918.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:18.087Z,1528899918.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:18.471Z,1528899918.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:18.489Z,1528899918.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:18.869Z,1528899918.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:18.887Z,1528899918.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:19.265Z,1528899919.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:19.283Z,1528899919.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:19.665Z,1528899919.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:19.683Z,1528899919.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:20.069Z,1528899920.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:20.087Z,1528899920.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:20.465Z,1528899920.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:20.482Z,1528899920.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:20.865Z,1528899920.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:20.883Z,1528899920.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:21.270Z,1528899921.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:21.292Z,1528899921.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:21.669Z,1528899921.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:21.686Z,1528899921.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:22.065Z,1528899922.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:22.083Z,1528899922.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:22.470Z,1528899922.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:22.487Z,1528899922.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:22.869Z,1528899922.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:22.886Z,1528899922.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:23.266Z,1528899923.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:23.284Z,1528899923.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:23.669Z,1528899923.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:23.687Z,1528899923.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:24.069Z,1528899924.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:24.087Z,1528899924.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:24.465Z,1528899924.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:24.483Z,1528899924.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:24.869Z,1528899924.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:24.887Z,1528899924.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:25.269Z,1528899925.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:25.287Z,1528899925.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:25.665Z,1528899925.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:25.683Z,1528899925.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:26.070Z,1528899926.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:26.088Z,1528899926.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:26.473Z,1528899926.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:26.490Z,1528899926.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:26.865Z,1528899926.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:26.883Z,1528899926.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:27.269Z,1528899927.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:27.287Z,1528899927.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:27.665Z,1528899927.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:27.688Z,1528899927.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:28.066Z,1528899928.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:28.084Z,1528899928.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:28.469Z,1528899928.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:28.487Z,1528899928.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:28.870Z,1528899928.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:28.887Z,1528899928.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:29.265Z,1528899929.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:29.283Z,1528899929.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:29.670Z,1528899929.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:29.687Z,1528899929.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:30.069Z,1528899930.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:30.087Z,1528899930.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:30.465Z,1528899930.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:30.483Z,1528899930.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:30.870Z,1528899930.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:30.888Z,1528899930.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:31.269Z,1528899931.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:31.287Z,1528899931.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:31.666Z,1528899931.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:31.684Z,1528899931.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:32.070Z,1528899932.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:32.088Z,1528899932.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:32.469Z,1528899932.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:32.487Z,1528899932.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:32.868Z,1528899932.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:32.886Z,1528899932.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:33.270Z,1528899933.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:33.292Z,1528899933.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:33.666Z,1528899933.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:33.683Z,1528899933.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:34.065Z,1528899934.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:34.083Z,1528899934.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:34.470Z,1528899934.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:34.488Z,1528899934.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:34.870Z,1528899934.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:34.887Z,1528899934.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:35.265Z,1528899935.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:35.283Z,1528899935.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:35.670Z,1528899935.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:35.688Z,1528899935.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:36.069Z,1528899936.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:36.087Z,1528899936.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:36.465Z,1528899936.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:36.483Z,1528899936.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:36.869Z,1528899936.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:36.887Z,1528899936.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:37.269Z,1528899937.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:37.286Z,1528899937.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:37.666Z,1528899937.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:37.684Z,1528899937.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:38.069Z,1528899938.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:38.087Z,1528899938.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:38.469Z,1528899938.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:38.487Z,1528899938.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:38.865Z,1528899938.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:38.883Z,1528899938.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:39.269Z,1528899939.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:39.287Z,1528899939.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:39.665Z,1528899939.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:39.688Z,1528899939.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:40.065Z,1528899940.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:40.083Z,1528899940.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:40.470Z,1528899940.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:40.488Z,1528899940.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:40.865Z,1528899940.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:40.882Z,1528899940.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:41.265Z,1528899941.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:41.283Z,1528899941.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:41.669Z,1528899941.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:41.688Z,1528899941.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:42.069Z,1528899942.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:42.086Z,1528899942.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:42.466Z,1528899942.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:42.484Z,1528899942.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:42.869Z,1528899942.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:42.887Z,1528899942.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:43.269Z,1528899943.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:43.287Z,1528899943.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:43.665Z,1528899943.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:43.683Z,1528899943.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:44.069Z,1528899944.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:44.087Z,1528899944.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:44.470Z,1528899944.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:44.487Z,1528899944.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:44.865Z,1528899944.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:44.883Z,1528899944.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:45.270Z,1528899945.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:45.287Z,1528899945.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:45.669Z,1528899945.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:45.686Z,1528899945.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:46.065Z,1528899946.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:46.083Z,1528899946.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:46.469Z,1528899946.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:46.488Z,1528899946.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:46.865Z,1528899946.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:46.882Z,1528899946.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:47.266Z,1528899947.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:47.284Z,1528899947.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:47.670Z,1528899947.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:47.688Z,1528899947.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:48.069Z,1528899948.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:48.087Z,1528899948.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:48.466Z,1528899948.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:48.484Z,1528899948.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:48.870Z,1528899948.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:48.888Z,1528899948.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:49.265Z,1528899949.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:49.283Z,1528899949.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:49.666Z,1528899949.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:49.684Z,1528899949.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:50.070Z,1528899950.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:50.088Z,1528899950.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:50.469Z,1528899950.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:50.487Z,1528899950.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:50.866Z,1528899950.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:50.884Z,1528899950.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:51.271Z,1528899951.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:51.288Z,1528899951.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:51.670Z,1528899951.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:51.688Z,1528899951.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:52.066Z,1528899952.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:52.084Z,1528899952.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:52.470Z,1528899952.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:52.488Z,1528899952.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:52.869Z,1528899952.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:52.887Z,1528899952.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:53.266Z,1528899953.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:53.284Z,1528899953.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:53.670Z,1528899953.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:53.688Z,1528899953.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:54.070Z,1528899954.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:54.092Z,1528899954.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:54.467Z,1528899954.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:54.486Z,1528899954.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:54.867Z,1528899954.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:54.892Z,1528899954.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:55.269Z,1528899955.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:55.287Z,1528899955.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:55.667Z,1528899955.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:55.686Z,1528899955.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:56.070Z,1528899956.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:56.087Z,1528899956.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:56.469Z,1528899956.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:56.487Z,1528899956.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:56.868Z,1528899956.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:56.886Z,1528899956.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:57.267Z,1528899957.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:57.288Z,1528899957.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:57.670Z,1528899957.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:57.688Z,1528899957.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:58.067Z,1528899958.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:58.086Z,1528899958.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:58.469Z,1528899958.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:58.486Z,1528899958.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:58.870Z,1528899958.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:58.888Z,1528899958.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:59.269Z,1528899959.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:59.287Z,1528899959.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:25:59.671Z,1528899959.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:25:59.688Z,1528899959.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:00.070Z,1528899960.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:00.112Z,1528899960.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:00.467Z,1528899960.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:00.485Z,1528899960.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:00.872Z,1528899960.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:00.890Z,1528899960.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:01.270Z,1528899961.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:01.305Z,1528899961.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:01.398Z,1528899961.398 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T14:26:01.398Z,1528899961.398 [NAL9602] No Fault, FailCount= 5
2018-06-13T14:26:01.646Z,1528899961.646 [NAL9602](INFO): Powering up NAL9602
2018-06-13T14:26:01.674Z,1528899961.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:01.696Z,1528899961.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:02.072Z,1528899962.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:02.089Z,1528899962.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:02.471Z,1528899962.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:02.494Z,1528899962.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:02.866Z,1528899962.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:02.891Z,1528899962.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:03.273Z,1528899963.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:03.291Z,1528899963.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:03.671Z,1528899963.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:03.695Z,1528899963.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:04.069Z,1528899964.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:04.087Z,1528899964.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:04.472Z,1528899964.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:04.489Z,1528899964.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:04.872Z,1528899964.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:04.891Z,1528899964.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:05.267Z,1528899965.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:05.285Z,1528899965.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:05.673Z,1528899965.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:05.696Z,1528899965.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:06.071Z,1528899966.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:06.095Z,1528899966.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:06.472Z,1528899966.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:06.490Z,1528899966.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:06.872Z,1528899966.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:06.889Z,1528899966.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:07.271Z,1528899967.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:07.295Z,1528899967.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:07.669Z,1528899967.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:07.687Z,1528899967.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:08.073Z,1528899968.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:08.090Z,1528899968.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:08.471Z,1528899968.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:08.495Z,1528899968.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:08.869Z,1528899968.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:08.888Z,1528899968.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:09.268Z,1528899969.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:09.285Z,1528899969.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:09.671Z,1528899969.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:09.700Z,1528899969.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:10.069Z,1528899970.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:10.087Z,1528899970.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:10.473Z,1528899970.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:10.496Z,1528899970.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:10.877Z,1528899970.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:10.900Z,1528899970.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:11.273Z,1528899971.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:11.291Z,1528899971.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:11.677Z,1528899971.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:11.695Z,1528899971.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:12.086Z,1528899972.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:12.104Z,1528899972.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:15.169Z,1528899975.169 [NAL9602](INFO): NAL9602 initialized
2018-06-13T14:26:15.185Z,1528899975.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:15.204Z,1528899975.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:15.338Z,1528899975.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:15.382Z,1528899975.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:15.745Z,1528899975.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:15.763Z,1528899975.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:16.145Z,1528899976.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:16.163Z,1528899976.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:16.538Z,1528899976.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:16.556Z,1528899976.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:16.934Z,1528899976.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:16.951Z,1528899976.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:17.330Z,1528899977.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:17.348Z,1528899977.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:17.731Z,1528899977.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:17.758Z,1528899977.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:18.131Z,1528899978.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:18.162Z,1528899978.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:18.543Z,1528899978.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:18.561Z,1528899978.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:18.942Z,1528899978.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:18.960Z,1528899978.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:19.343Z,1528899979.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:19.361Z,1528899979.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:19.730Z,1528899979.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:19.748Z,1528899979.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:20.131Z,1528899980.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:20.154Z,1528899980.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:20.532Z,1528899980.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:20.563Z,1528899980.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:20.923Z,1528899980.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:20.957Z,1528899980.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:21.339Z,1528899981.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:21.358Z,1528899981.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:21.745Z,1528899981.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:21.770Z,1528899981.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:22.137Z,1528899982.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:22.171Z,1528899982.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:22.527Z,1528899982.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:22.558Z,1528899982.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:22.927Z,1528899982.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:22.944Z,1528899982.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:23.341Z,1528899983.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:23.372Z,1528899983.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:23.741Z,1528899983.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:23.778Z,1528899983.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:24.141Z,1528899984.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:24.159Z,1528899984.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:24.533Z,1528899984.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:24.552Z,1528899984.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:24.932Z,1528899984.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:24.950Z,1528899984.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:25.341Z,1528899985.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:25.359Z,1528899985.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:25.737Z,1528899985.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:25.755Z,1528899985.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:26.134Z,1528899986.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:26.152Z,1528899986.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:26.532Z,1528899986.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:26.550Z,1528899986.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:26.930Z,1528899986.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:26.947Z,1528899986.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:27.338Z,1528899987.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:27.356Z,1528899987.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:27.737Z,1528899987.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:27.755Z,1528899987.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:28.137Z,1528899988.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:28.155Z,1528899988.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:28.532Z,1528899988.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:28.550Z,1528899988.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:28.931Z,1528899988.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:28.956Z,1528899988.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:29.337Z,1528899989.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:29.356Z,1528899989.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:29.741Z,1528899989.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:29.759Z,1528899989.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:30.145Z,1528899990.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:30.163Z,1528899990.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:30.534Z,1528899990.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:30.552Z,1528899990.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:30.926Z,1528899990.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:30.952Z,1528899990.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:31.343Z,1528899991.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:31.362Z,1528899991.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:31.746Z,1528899991.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:31.764Z,1528899991.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:32.143Z,1528899992.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:32.161Z,1528899992.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:32.531Z,1528899992.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:32.562Z,1528899992.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:32.923Z,1528899992.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:32.957Z,1528899992.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:33.343Z,1528899993.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:33.361Z,1528899993.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:33.747Z,1528899993.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:33.766Z,1528899993.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:34.145Z,1528899994.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:34.163Z,1528899994.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:34.527Z,1528899994.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:34.556Z,1528899994.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:34.927Z,1528899994.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:34.955Z,1528899994.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:35.348Z,1528899995.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:35.366Z,1528899995.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:35.748Z,1528899995.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:35.766Z,1528899995.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:36.148Z,1528899996.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:36.167Z,1528899996.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:36.524Z,1528899996.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:36.558Z,1528899996.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:36.929Z,1528899996.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:36.959Z,1528899996.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:37.334Z,1528899997.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:37.365Z,1528899997.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:37.738Z,1528899997.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:37.778Z,1528899997.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:38.138Z,1528899998.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:38.167Z,1528899998.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:38.527Z,1528899998.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:38.558Z,1528899998.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:38.928Z,1528899998.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:38.946Z,1528899998.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:39.342Z,1528899999.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:39.376Z,1528899999.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:39.746Z,1528899999.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:39.774Z,1528899999.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:40.141Z,1528900000.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:40.172Z,1528900000.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:40.530Z,1528900000.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:40.553Z,1528900000.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:40.929Z,1528900000.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:40.948Z,1528900000.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:41.337Z,1528900001.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:41.355Z,1528900001.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:41.741Z,1528900001.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:41.759Z,1528900001.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:42.137Z,1528900002.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:42.156Z,1528900002.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:42.533Z,1528900002.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:42.551Z,1528900002.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:42.932Z,1528900002.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:42.949Z,1528900002.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:43.336Z,1528900003.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:43.354Z,1528900003.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:43.737Z,1528900003.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:43.755Z,1528900003.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:44.137Z,1528900004.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:44.155Z,1528900004.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:44.532Z,1528900004.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:44.550Z,1528900004.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:44.929Z,1528900004.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:44.947Z,1528900004.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:45.334Z,1528900005.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:45.352Z,1528900005.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:45.741Z,1528900005.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:45.759Z,1528900005.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:46.137Z,1528900006.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:46.155Z,1528900006.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:46.531Z,1528900006.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:46.554Z,1528900006.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:46.931Z,1528900006.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:46.960Z,1528900006.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:47.329Z,1528900007.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:47.347Z,1528900007.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:47.742Z,1528900007.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:47.760Z,1528900007.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:48.141Z,1528900008.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:48.159Z,1528900008.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:48.543Z,1528900008.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:48.561Z,1528900008.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:48.933Z,1528900008.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:48.951Z,1528900008.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:49.333Z,1528900009.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:49.356Z,1528900009.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:49.730Z,1528900009.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:49.748Z,1528900009.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:50.126Z,1528900010.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:50.158Z,1528900010.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:50.540Z,1528900010.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:50.564Z,1528900010.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:50.942Z,1528900010.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:50.960Z,1528900010.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:51.342Z,1528900011.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:51.360Z,1528900011.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:51.732Z,1528900011.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:51.750Z,1528900011.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:52.129Z,1528900012.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:52.147Z,1528900012.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:52.527Z,1528900012.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:52.563Z,1528900012.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:52.927Z,1528900012.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:52.957Z,1528900012.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:53.327Z,1528900013.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:53.353Z,1528900013.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:53.741Z,1528900013.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:53.777Z,1528900013.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:54.141Z,1528900014.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:54.169Z,1528900014.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:54.537Z,1528900014.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:54.566Z,1528900014.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:54.927Z,1528900014.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:54.944Z,1528900014.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:55.323Z,1528900015.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:55.348Z,1528900015.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:55.731Z,1528900015.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:55.770Z,1528900015.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:56.127Z,1528900016.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:56.144Z,1528900016.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:56.541Z,1528900016.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:56.576Z,1528900016.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:56.945Z,1528900016.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:56.974Z,1528900016.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:57.342Z,1528900017.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:57.376Z,1528900017.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:57.731Z,1528900017.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:57.749Z,1528900017.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:58.132Z,1528900018.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:58.150Z,1528900018.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:58.531Z,1528900018.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:58.548Z,1528900018.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:58.930Z,1528900018.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:58.948Z,1528900018.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:59.330Z,1528900019.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:59.348Z,1528900019.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:26:59.742Z,1528900019.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:26:59.776Z,1528900019.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:00.145Z,1528900020.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:00.179Z,1528900020.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:00.541Z,1528900020.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:00.560Z,1528900020.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:00.932Z,1528900020.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:00.950Z,1528900020.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:01.331Z,1528900021.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:01.349Z,1528900021.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:01.733Z,1528900021.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:01.756Z,1528900021.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:02.132Z,1528900022.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:02.150Z,1528900022.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:02.537Z,1528900022.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:02.555Z,1528900022.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:02.941Z,1528900022.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:02.959Z,1528900022.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:03.338Z,1528900023.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:03.355Z,1528900023.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:03.731Z,1528900023.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:03.756Z,1528900023.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:04.133Z,1528900024.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:04.152Z,1528900024.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:04.527Z,1528900024.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:04.544Z,1528900024.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:04.931Z,1528900024.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:04.949Z,1528900024.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:05.331Z,1528900025.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:05.376Z,1528900025.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:05.741Z,1528900025.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:05.775Z,1528900025.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:06.141Z,1528900026.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:06.184Z,1528900026.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:06.541Z,1528900026.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:06.559Z,1528900026.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:06.932Z,1528900026.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:06.950Z,1528900026.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:07.331Z,1528900027.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:07.356Z,1528900027.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:07.734Z,1528900027.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:07.752Z,1528900027.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:08.132Z,1528900028.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:08.149Z,1528900028.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:08.538Z,1528900028.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:08.556Z,1528900028.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:08.942Z,1528900028.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:08.964Z,1528900028.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:09.338Z,1528900029.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:09.360Z,1528900029.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:09.736Z,1528900029.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:09.754Z,1528900029.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:10.134Z,1528900030.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:10.152Z,1528900030.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:10.533Z,1528900030.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:10.551Z,1528900030.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:10.933Z,1528900030.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:10.951Z,1528900030.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:11.334Z,1528900031.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:11.351Z,1528900031.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:11.741Z,1528900031.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:11.759Z,1528900031.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:12.141Z,1528900032.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:12.159Z,1528900032.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:15.254Z,1528900035.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:15.292Z,1528900035.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:15.415Z,1528900035.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:15.465Z,1528900035.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:15.815Z,1528900035.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:15.843Z,1528900035.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:16.219Z,1528900036.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:16.247Z,1528900036.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:16.612Z,1528900036.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:16.647Z,1528900036.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:17.011Z,1528900037.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:17.044Z,1528900037.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:17.432Z,1528900037.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:17.450Z,1528900037.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:17.830Z,1528900037.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:17.848Z,1528900037.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:18.228Z,1528900038.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:18.246Z,1528900038.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:18.612Z,1528900038.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:18.642Z,1528900038.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:19.011Z,1528900039.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:19.045Z,1528900039.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:19.428Z,1528900039.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:19.446Z,1528900039.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:19.833Z,1528900039.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:19.850Z,1528900039.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:20.226Z,1528900040.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:20.249Z,1528900040.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:20.612Z,1528900040.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:20.647Z,1528900040.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:21.012Z,1528900041.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:21.050Z,1528900041.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:21.425Z,1528900041.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:21.453Z,1528900041.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:21.826Z,1528900041.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:21.864Z,1528900041.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:22.226Z,1528900042.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:22.260Z,1528900042.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:22.613Z,1528900042.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:22.654Z,1528900042.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:23.014Z,1528900043.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:23.032Z,1528900043.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:23.426Z,1528900043.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:23.465Z,1528900043.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:23.830Z,1528900043.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:23.858Z,1528900043.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:24.222Z,1528900044.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:24.250Z,1528900044.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:24.616Z,1528900044.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:24.634Z,1528900044.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:25.015Z,1528900045.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:25.032Z,1528900045.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:25.425Z,1528900045.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:25.459Z,1528900045.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:25.822Z,1528900045.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:25.840Z,1528900045.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:26.226Z,1528900046.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:26.264Z,1528900046.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:26.610Z,1528900046.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:26.655Z,1528900046.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:27.019Z,1528900047.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:27.036Z,1528900047.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:27.423Z,1528900047.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:27.441Z,1528900047.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:27.826Z,1528900047.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:27.844Z,1528900047.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:28.223Z,1528900048.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:28.242Z,1528900048.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:28.616Z,1528900048.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:28.651Z,1528900048.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:29.015Z,1528900049.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:29.046Z,1528900049.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:29.428Z,1528900049.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:29.447Z,1528900049.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:29.831Z,1528900049.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:29.850Z,1528900049.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:30.220Z,1528900050.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:30.255Z,1528900050.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:30.612Z,1528900050.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:30.642Z,1528900050.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:31.011Z,1528900051.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:31.047Z,1528900051.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:31.435Z,1528900051.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:31.453Z,1528900051.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:31.832Z,1528900051.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:31.850Z,1528900051.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:32.226Z,1528900052.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:32.257Z,1528900052.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:32.612Z,1528900052.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:32.642Z,1528900052.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:33.007Z,1528900053.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:33.042Z,1528900053.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:33.428Z,1528900053.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:33.446Z,1528900053.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:33.832Z,1528900053.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:33.850Z,1528900053.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:34.231Z,1528900054.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:34.254Z,1528900054.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:34.612Z,1528900054.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:34.646Z,1528900054.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:35.011Z,1528900055.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:35.049Z,1528900055.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:35.421Z,1528900055.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:35.462Z,1528900055.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:35.824Z,1528900055.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:35.854Z,1528900055.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:36.221Z,1528900056.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:36.256Z,1528900056.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:36.612Z,1528900056.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:36.646Z,1528900056.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:37.011Z,1528900057.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:37.029Z,1528900057.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:37.429Z,1528900057.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:37.458Z,1528900057.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:37.825Z,1528900057.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:37.863Z,1528900057.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:38.226Z,1528900058.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:38.263Z,1528900058.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:38.615Z,1528900058.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:38.634Z,1528900058.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:39.015Z,1528900059.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:39.032Z,1528900059.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:39.425Z,1528900059.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:39.459Z,1528900059.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:39.829Z,1528900059.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:39.863Z,1528900059.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:40.225Z,1528900060.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:40.248Z,1528900060.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:40.618Z,1528900060.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:40.636Z,1528900060.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:41.022Z,1528900061.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:41.040Z,1528900061.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:41.415Z,1528900061.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:41.433Z,1528900061.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:41.829Z,1528900061.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:41.847Z,1528900061.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:42.225Z,1528900062.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:42.243Z,1528900062.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:42.623Z,1528900062.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:42.642Z,1528900062.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:43.018Z,1528900063.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:43.044Z,1528900063.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:43.415Z,1528900063.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:43.440Z,1528900063.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:43.821Z,1528900063.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:43.839Z,1528900063.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:44.215Z,1528900064.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:44.240Z,1528900064.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:44.627Z,1528900064.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:44.645Z,1528900064.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:45.028Z,1528900065.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:45.046Z,1528900065.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:45.426Z,1528900065.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:45.444Z,1528900065.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:45.815Z,1528900065.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:45.840Z,1528900065.840 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:45.841Z,1528900065.841 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 220
2018-06-13T14:27:45.841Z,1528900065.841 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:27:45.843Z,1528900065.843 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:45.843Z,1528900065.843 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 220
2018-06-13T14:27:45.843Z,1528900065.843 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:27:45.844Z,1528900065.844 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:45.845Z,1528900065.845 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 220
2018-06-13T14:27:45.845Z,1528900065.845 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:27:45.917Z,1528900065.917 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:27:45.917Z,1528900065.917 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:27:45.918Z,1528900065.918 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:27:46.207Z,1528900066.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:46.321Z,1528900066.321 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:27:46.321Z,1528900066.321 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 220
2018-06-13T14:27:46.322Z,1528900066.322 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:27:46.322Z,1528900066.322 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 220
2018-06-13T14:27:46.322Z,1528900066.322 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:27:46.322Z,1528900066.322 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 220
2018-06-13T14:27:46.607Z,1528900066.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:46.643Z,1528900066.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:27:46.643Z,1528900066.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:27:46.644Z,1528900066.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:27:46.644Z,1528900066.644 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:27:46.644Z,1528900066.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:27:46.645Z,1528900066.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:27:46.645Z,1528900066.645 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:27:46.646Z,1528900066.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:27:46.646Z,1528900066.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:27:47.008Z,1528900067.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:47.045Z,1528900067.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:27:47.046Z,1528900067.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:47.407Z,1528900067.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:47.444Z,1528900067.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:27:47.445Z,1528900067.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:47.832Z,1528900067.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:47.850Z,1528900067.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:27:47.851Z,1528900067.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:48.232Z,1528900068.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:48.249Z,1528900068.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:27:48.250Z,1528900068.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:48.632Z,1528900068.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:48.650Z,1528900068.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:27:48.651Z,1528900068.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:49.011Z,1528900069.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:49.052Z,1528900069.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:27:49.054Z,1528900069.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:49.411Z,1528900069.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:49.441Z,1528900069.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:27:49.442Z,1528900069.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:49.813Z,1528900069.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:49.841Z,1528900069.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:27:49.842Z,1528900069.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:50.211Z,1528900070.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:50.243Z,1528900070.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:27:50.244Z,1528900070.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:50.628Z,1528900070.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:50.646Z,1528900070.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:27:50.647Z,1528900070.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:51.032Z,1528900071.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:51.050Z,1528900071.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:27:51.050Z,1528900071.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:51.436Z,1528900071.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:51.454Z,1528900071.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:27:51.455Z,1528900071.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:51.811Z,1528900071.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:51.852Z,1528900071.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:27:51.857Z,1528900071.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:52.212Z,1528900072.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:52.245Z,1528900072.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:27:52.246Z,1528900072.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:52.613Z,1528900072.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:52.638Z,1528900072.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:27:52.639Z,1528900072.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:53.012Z,1528900073.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:53.030Z,1528900073.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:27:53.031Z,1528900073.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:53.415Z,1528900073.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:53.433Z,1528900073.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:27:53.434Z,1528900073.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:53.825Z,1528900073.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:53.863Z,1528900073.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:27:53.864Z,1528900073.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:54.225Z,1528900074.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:54.262Z,1528900074.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:27:54.263Z,1528900074.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:54.622Z,1528900074.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:54.640Z,1528900074.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:27:54.640Z,1528900074.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:55.014Z,1528900075.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:55.043Z,1528900075.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:27:55.044Z,1528900075.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:55.414Z,1528900075.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:55.444Z,1528900075.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:27:55.449Z,1528900075.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:55.815Z,1528900075.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:55.832Z,1528900075.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:27:55.833Z,1528900075.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:56.215Z,1528900076.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:56.246Z,1528900076.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:27:56.247Z,1528900076.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:56.621Z,1528900076.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:56.648Z,1528900076.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:27:56.669Z,1528900076.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:57.025Z,1528900077.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:57.043Z,1528900077.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:27:57.044Z,1528900077.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:57.425Z,1528900077.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:57.443Z,1528900077.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:27:57.444Z,1528900077.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:57.815Z,1528900077.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:57.847Z,1528900077.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:27:57.848Z,1528900077.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:58.222Z,1528900078.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:58.240Z,1528900078.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:27:58.241Z,1528900078.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:58.615Z,1528900078.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:58.646Z,1528900078.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:27:58.647Z,1528900078.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:59.016Z,1528900079.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:59.046Z,1528900079.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:27:59.047Z,1528900079.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:59.416Z,1528900079.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:59.433Z,1528900079.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:27:59.434Z,1528900079.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:27:59.826Z,1528900079.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:27:59.844Z,1528900079.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:27:59.845Z,1528900079.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:00.226Z,1528900080.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:00.244Z,1528900080.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:28:00.245Z,1528900080.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:00.628Z,1528900080.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:00.646Z,1528900080.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:28:00.647Z,1528900080.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:01.015Z,1528900081.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:01.038Z,1528900081.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:28:01.039Z,1528900081.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:01.415Z,1528900081.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:01.446Z,1528900081.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:28:01.447Z,1528900081.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:01.808Z,1528900081.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:01.841Z,1528900081.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:28:01.842Z,1528900081.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:02.223Z,1528900082.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:02.240Z,1528900082.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:28:02.241Z,1528900082.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:02.630Z,1528900082.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:02.648Z,1528900082.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:28:02.649Z,1528900082.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:03.029Z,1528900083.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:03.047Z,1528900083.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:28:03.047Z,1528900083.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:03.428Z,1528900083.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:03.446Z,1528900083.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:28:03.447Z,1528900083.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:03.815Z,1528900083.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:03.845Z,1528900083.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:28:03.846Z,1528900083.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:04.218Z,1528900084.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:04.250Z,1528900084.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:28:04.251Z,1528900084.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:04.611Z,1528900084.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:04.648Z,1528900084.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:28:04.649Z,1528900084.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:05.012Z,1528900085.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:05.042Z,1528900085.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:28:05.043Z,1528900085.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:05.407Z,1528900085.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:05.442Z,1528900085.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:28:05.443Z,1528900085.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:05.828Z,1528900085.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:05.846Z,1528900085.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:06.233Z,1528900086.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:06.259Z,1528900086.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:06.627Z,1528900086.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:06.646Z,1528900086.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:07.011Z,1528900087.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:07.046Z,1528900087.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:07.411Z,1528900087.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:07.449Z,1528900087.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:07.808Z,1528900087.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:07.847Z,1528900087.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:08.211Z,1528900088.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:08.250Z,1528900088.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:08.621Z,1528900088.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:08.650Z,1528900088.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:09.037Z,1528900089.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:09.055Z,1528900089.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:09.425Z,1528900089.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:09.460Z,1528900089.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:09.815Z,1528900089.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:09.834Z,1528900089.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:10.211Z,1528900090.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:10.228Z,1528900090.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:10.614Z,1528900090.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:10.636Z,1528900090.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:11.015Z,1528900091.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:11.034Z,1528900091.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:11.418Z,1528900091.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:11.436Z,1528900091.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:11.833Z,1528900091.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:11.866Z,1528900091.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:12.233Z,1528900092.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:12.272Z,1528900092.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:15.342Z,1528900095.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:15.369Z,1528900095.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:15.483Z,1528900095.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:15.528Z,1528900095.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:15.883Z,1528900095.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:15.921Z,1528900095.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:16.280Z,1528900096.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:16.298Z,1528900096.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:16.684Z,1528900096.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:16.702Z,1528900096.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:17.083Z,1528900097.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:17.101Z,1528900097.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:17.489Z,1528900097.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:17.507Z,1528900097.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:17.893Z,1528900097.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:17.911Z,1528900097.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:18.297Z,1528900098.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:18.335Z,1528900098.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:18.685Z,1528900098.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:18.703Z,1528900098.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:19.080Z,1528900099.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:19.120Z,1528900099.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:19.490Z,1528900099.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:19.508Z,1528900099.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:19.891Z,1528900099.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:19.909Z,1528900099.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:20.290Z,1528900100.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:20.312Z,1528900100.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:20.688Z,1528900100.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:20.707Z,1528900100.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:21.082Z,1528900101.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:21.100Z,1528900101.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:21.490Z,1528900101.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:21.512Z,1528900101.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:21.893Z,1528900101.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:21.911Z,1528900101.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:22.291Z,1528900102.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:22.308Z,1528900102.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:22.686Z,1528900102.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:22.703Z,1528900102.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:23.085Z,1528900103.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:23.103Z,1528900103.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:23.491Z,1528900103.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:23.509Z,1528900103.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:23.893Z,1528900103.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:23.911Z,1528900103.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:24.290Z,1528900104.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:24.316Z,1528900104.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:24.683Z,1528900104.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:24.700Z,1528900104.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:25.083Z,1528900105.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:25.112Z,1528900105.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:25.483Z,1528900105.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:25.518Z,1528900105.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:25.896Z,1528900105.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:25.914Z,1528900105.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:26.294Z,1528900106.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:26.320Z,1528900106.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:26.694Z,1528900106.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:26.712Z,1528900106.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:27.083Z,1528900107.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:27.100Z,1528900107.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:27.475Z,1528900107.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:27.511Z,1528900107.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:27.884Z,1528900107.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:27.910Z,1528900107.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:28.286Z,1528900108.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:28.303Z,1528900108.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:28.699Z,1528900108.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:28.716Z,1528900108.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:29.099Z,1528900109.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:29.117Z,1528900109.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:29.497Z,1528900109.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:29.515Z,1528900109.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:29.883Z,1528900109.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:29.912Z,1528900109.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:30.279Z,1528900110.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:30.316Z,1528900110.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:30.675Z,1528900110.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:30.711Z,1528900110.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:31.075Z,1528900111.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:31.117Z,1528900111.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:31.479Z,1528900111.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:31.507Z,1528900111.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:31.900Z,1528900111.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:31.919Z,1528900111.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:32.299Z,1528900112.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:32.318Z,1528900112.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:32.695Z,1528900112.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:32.715Z,1528900112.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:33.075Z,1528900113.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:33.112Z,1528900113.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:33.479Z,1528900113.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:33.506Z,1528900113.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:33.880Z,1528900113.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:33.910Z,1528900113.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:34.275Z,1528900114.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:34.312Z,1528900114.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:34.695Z,1528900114.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:34.713Z,1528900114.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:35.099Z,1528900115.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:35.117Z,1528900115.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:35.497Z,1528900115.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:35.515Z,1528900115.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:35.879Z,1528900115.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:35.913Z,1528900115.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:36.279Z,1528900116.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:36.312Z,1528900116.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:36.679Z,1528900116.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:36.713Z,1528900116.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:37.080Z,1528900117.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:37.124Z,1528900117.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:37.483Z,1528900117.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:37.502Z,1528900117.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:37.889Z,1528900117.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:37.907Z,1528900117.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:38.297Z,1528900118.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:38.335Z,1528900118.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:38.690Z,1528900118.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:38.708Z,1528900118.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:39.082Z,1528900119.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:39.100Z,1528900119.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:39.484Z,1528900119.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:39.508Z,1528900119.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:39.884Z,1528900119.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:39.902Z,1528900119.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:40.282Z,1528900120.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:40.304Z,1528900120.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:40.690Z,1528900120.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:40.708Z,1528900120.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:41.093Z,1528900121.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:41.111Z,1528900121.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:41.489Z,1528900121.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:41.507Z,1528900121.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:41.884Z,1528900121.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:41.908Z,1528900121.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:42.284Z,1528900122.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:42.305Z,1528900122.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:42.682Z,1528900122.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:42.700Z,1528900122.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:43.087Z,1528900123.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:43.104Z,1528900123.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:43.484Z,1528900123.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:43.508Z,1528900123.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:43.889Z,1528900123.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:43.908Z,1528900123.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:44.293Z,1528900124.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:44.311Z,1528900124.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:44.690Z,1528900124.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:44.708Z,1528900124.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:45.083Z,1528900125.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:45.101Z,1528900125.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:45.485Z,1528900125.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:45.503Z,1528900125.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:45.884Z,1528900125.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:45.910Z,1528900125.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:46.282Z,1528900126.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:46.300Z,1528900126.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:46.690Z,1528900126.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:46.708Z,1528900126.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:47.094Z,1528900127.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:47.112Z,1528900127.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:47.489Z,1528900127.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:47.507Z,1528900127.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:47.884Z,1528900127.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:47.908Z,1528900127.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:48.286Z,1528900128.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:48.304Z,1528900128.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:48.683Z,1528900128.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:48.701Z,1528900128.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:49.087Z,1528900129.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:49.105Z,1528900129.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:49.484Z,1528900129.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:49.502Z,1528900129.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:49.890Z,1528900129.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:49.908Z,1528900129.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:50.294Z,1528900130.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:50.316Z,1528900130.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:50.690Z,1528900130.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:50.708Z,1528900130.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:51.082Z,1528900131.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:51.100Z,1528900131.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:51.484Z,1528900131.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:51.508Z,1528900131.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:51.884Z,1528900131.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:51.904Z,1528900131.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:52.281Z,1528900132.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:52.300Z,1528900132.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:52.690Z,1528900132.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:52.708Z,1528900132.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:53.093Z,1528900133.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:53.112Z,1528900133.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:53.489Z,1528900133.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:53.507Z,1528900133.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:53.885Z,1528900133.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:53.903Z,1528900133.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:54.284Z,1528900134.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:54.302Z,1528900134.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:54.683Z,1528900134.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:54.701Z,1528900134.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:55.084Z,1528900135.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:55.102Z,1528900135.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:55.484Z,1528900135.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:55.501Z,1528900135.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:55.889Z,1528900135.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:55.908Z,1528900135.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:56.293Z,1528900136.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:56.311Z,1528900136.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:56.690Z,1528900136.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:56.708Z,1528900136.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:57.082Z,1528900137.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:57.100Z,1528900137.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:57.484Z,1528900137.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:57.502Z,1528900137.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:57.885Z,1528900137.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:57.902Z,1528900137.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:58.284Z,1528900138.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:58.302Z,1528900138.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:58.690Z,1528900138.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:58.709Z,1528900138.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:59.093Z,1528900139.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:59.111Z,1528900139.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:59.493Z,1528900139.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:59.511Z,1528900139.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:28:59.883Z,1528900139.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:28:59.908Z,1528900139.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:00.283Z,1528900140.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:00.301Z,1528900140.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:00.684Z,1528900140.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:00.702Z,1528900140.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:01.084Z,1528900141.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:01.102Z,1528900141.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:01.485Z,1528900141.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:01.502Z,1528900141.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:01.889Z,1528900141.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:01.907Z,1528900141.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:02.293Z,1528900142.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:02.311Z,1528900142.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:02.689Z,1528900142.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:02.707Z,1528900142.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:03.085Z,1528900143.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:03.103Z,1528900143.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:03.484Z,1528900143.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:03.503Z,1528900143.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:03.884Z,1528900143.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:03.902Z,1528900143.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:04.286Z,1528900144.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:04.304Z,1528900144.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:04.691Z,1528900144.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:04.716Z,1528900144.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:05.093Z,1528900145.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:05.111Z,1528900145.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:05.493Z,1528900145.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:05.512Z,1528900145.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:05.883Z,1528900145.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:05.914Z,1528900145.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:06.290Z,1528900146.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:06.307Z,1528900146.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:06.686Z,1528900146.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:06.704Z,1528900146.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:07.087Z,1528900147.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:07.105Z,1528900147.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:07.485Z,1528900147.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:07.503Z,1528900147.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:07.893Z,1528900147.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:07.911Z,1528900147.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:08.298Z,1528900148.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:08.316Z,1528900148.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:08.689Z,1528900148.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:08.712Z,1528900148.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:09.086Z,1528900149.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:09.104Z,1528900149.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:09.483Z,1528900149.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:09.513Z,1528900149.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:09.885Z,1528900149.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:09.903Z,1528900149.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:10.286Z,1528900150.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:10.305Z,1528900150.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:10.694Z,1528900150.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:10.712Z,1528900150.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:11.094Z,1528900151.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:11.112Z,1528900151.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:11.495Z,1528900151.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:11.513Z,1528900151.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:11.885Z,1528900151.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:11.903Z,1528900151.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:12.289Z,1528900152.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:12.306Z,1528900152.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:12.690Z,1528900152.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:12.708Z,1528900152.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:13.091Z,1528900153.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:13.108Z,1528900153.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:13.489Z,1528900153.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:13.512Z,1528900153.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:13.897Z,1528900153.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:13.915Z,1528900153.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:14.298Z,1528900154.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:14.315Z,1528900154.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:14.694Z,1528900154.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:14.716Z,1528900154.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:15.086Z,1528900155.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:15.105Z,1528900155.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:15.489Z,1528900155.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:15.507Z,1528900155.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:15.890Z,1528900155.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:15.908Z,1528900155.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:18.998Z,1528900158.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:19.016Z,1528900159.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:19.161Z,1528900159.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:19.190Z,1528900159.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:19.557Z,1528900159.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:19.595Z,1528900159.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:19.957Z,1528900159.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:19.975Z,1528900159.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:20.345Z,1528900160.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:20.362Z,1528900160.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:20.743Z,1528900160.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:20.765Z,1528900160.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:21.147Z,1528900161.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:21.165Z,1528900161.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:21.543Z,1528900161.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:21.565Z,1528900161.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:21.954Z,1528900161.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:21.972Z,1528900161.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:22.355Z,1528900162.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:22.372Z,1528900162.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:22.754Z,1528900162.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:22.771Z,1528900162.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:23.143Z,1528900163.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:23.167Z,1528900163.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:23.546Z,1528900163.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:23.564Z,1528900163.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:23.944Z,1528900163.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:23.979Z,1528900163.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:24.339Z,1528900164.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:24.367Z,1528900164.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:24.760Z,1528900164.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:24.778Z,1528900164.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:25.159Z,1528900165.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:25.177Z,1528900165.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:25.555Z,1528900165.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:25.573Z,1528900165.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:25.939Z,1528900165.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:25.976Z,1528900165.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:26.339Z,1528900166.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:26.372Z,1528900166.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:26.735Z,1528900166.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:26.772Z,1528900166.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:27.140Z,1528900167.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:27.172Z,1528900167.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:27.539Z,1528900167.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:27.571Z,1528900167.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:27.956Z,1528900167.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:27.975Z,1528900167.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:28.357Z,1528900168.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:28.375Z,1528900168.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:28.760Z,1528900168.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:28.784Z,1528900168.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:29.139Z,1528900169.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:29.176Z,1528900169.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:29.539Z,1528900169.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:29.572Z,1528900169.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:29.940Z,1528900169.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:29.975Z,1528900169.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:30.339Z,1528900170.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:30.376Z,1528900170.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:30.761Z,1528900170.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:30.779Z,1528900170.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:31.158Z,1528900171.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:31.176Z,1528900171.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:31.556Z,1528900171.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:31.574Z,1528900171.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:31.935Z,1528900171.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:31.964Z,1528900171.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:32.339Z,1528900172.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:32.375Z,1528900172.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:32.736Z,1528900172.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:32.762Z,1528900172.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:33.136Z,1528900173.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:33.154Z,1528900173.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:33.539Z,1528900173.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:33.557Z,1528900173.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:33.953Z,1528900173.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:33.983Z,1528900173.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:34.357Z,1528900174.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:34.392Z,1528900174.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:34.754Z,1528900174.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:34.785Z,1528900174.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:35.144Z,1528900175.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:35.185Z,1528900175.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:35.544Z,1528900175.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:35.579Z,1528900175.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:35.944Z,1528900175.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:35.962Z,1528900175.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:36.342Z,1528900176.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:36.361Z,1528900176.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:36.749Z,1528900176.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:36.768Z,1528900176.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:37.152Z,1528900177.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:37.170Z,1528900177.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:37.550Z,1528900177.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:37.569Z,1528900177.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:37.942Z,1528900177.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:37.959Z,1528900177.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:38.344Z,1528900178.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:38.362Z,1528900178.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:38.744Z,1528900178.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:38.762Z,1528900178.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:39.142Z,1528900179.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:39.160Z,1528900179.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:39.544Z,1528900179.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:39.562Z,1528900179.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:39.950Z,1528900179.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:39.968Z,1528900179.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:40.349Z,1528900180.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:40.367Z,1528900180.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:40.750Z,1528900180.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:40.767Z,1528900180.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:41.144Z,1528900181.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:41.162Z,1528900181.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:41.542Z,1528900181.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:41.559Z,1528900181.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:41.944Z,1528900181.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:41.962Z,1528900181.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:42.343Z,1528900182.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:42.362Z,1528900182.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:42.749Z,1528900182.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:42.767Z,1528900182.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:43.153Z,1528900183.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:43.171Z,1528900183.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:43.549Z,1528900183.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:43.567Z,1528900183.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:43.944Z,1528900183.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:43.962Z,1528900183.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:44.344Z,1528900184.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:44.362Z,1528900184.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:44.744Z,1528900184.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:44.762Z,1528900184.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:45.143Z,1528900185.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:45.161Z,1528900185.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:45.544Z,1528900185.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:45.563Z,1528900185.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:45.950Z,1528900185.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:45.968Z,1528900185.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:46.349Z,1528900186.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:46.367Z,1528900186.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:46.750Z,1528900186.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:46.767Z,1528900186.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:47.138Z,1528900187.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:47.181Z,1528900187.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:47.542Z,1528900187.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:47.560Z,1528900187.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:47.944Z,1528900187.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:47.966Z,1528900187.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:48.344Z,1528900188.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:48.362Z,1528900188.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:48.749Z,1528900188.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:48.767Z,1528900188.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:49.153Z,1528900189.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:49.195Z,1528900189.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:49.550Z,1528900189.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:49.568Z,1528900189.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:49.946Z,1528900189.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:49.964Z,1528900189.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:50.344Z,1528900190.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:50.362Z,1528900190.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:50.746Z,1528900190.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:50.764Z,1528900190.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:51.143Z,1528900191.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:51.161Z,1528900191.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:51.542Z,1528900191.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:51.571Z,1528900191.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:51.951Z,1528900191.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:51.969Z,1528900191.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:52.350Z,1528900192.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:52.367Z,1528900192.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:52.750Z,1528900192.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:52.768Z,1528900192.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:53.144Z,1528900193.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:53.162Z,1528900193.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:53.542Z,1528900193.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:53.560Z,1528900193.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:53.944Z,1528900193.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:53.963Z,1528900193.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:54.344Z,1528900194.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:54.362Z,1528900194.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:54.749Z,1528900194.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:54.768Z,1528900194.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:55.153Z,1528900195.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:55.172Z,1528900195.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:55.550Z,1528900195.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:55.568Z,1528900195.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:55.942Z,1528900195.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:55.960Z,1528900195.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:56.344Z,1528900196.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:56.362Z,1528900196.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:56.742Z,1528900196.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:56.775Z,1528900196.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:57.142Z,1528900197.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:57.160Z,1528900197.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:57.544Z,1528900197.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:57.562Z,1528900197.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:57.949Z,1528900197.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:57.968Z,1528900197.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:58.349Z,1528900198.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:58.367Z,1528900198.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:58.750Z,1528900198.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:58.768Z,1528900198.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:59.144Z,1528900199.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:59.162Z,1528900199.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:59.542Z,1528900199.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:59.560Z,1528900199.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:29:59.944Z,1528900199.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:29:59.962Z,1528900199.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:00.344Z,1528900200.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:00.362Z,1528900200.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:00.753Z,1528900200.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:00.772Z,1528900200.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:01.153Z,1528900201.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:01.171Z,1528900201.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:01.553Z,1528900201.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:01.571Z,1528900201.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:01.942Z,1528900201.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:01.959Z,1528900201.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:02.344Z,1528900202.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:02.362Z,1528900202.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:02.744Z,1528900202.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:02.762Z,1528900202.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:03.142Z,1528900203.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:03.160Z,1528900203.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:03.544Z,1528900203.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:03.562Z,1528900203.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:03.949Z,1528900203.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:03.968Z,1528900203.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:04.349Z,1528900204.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:04.367Z,1528900204.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:04.750Z,1528900204.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:04.767Z,1528900204.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:05.144Z,1528900205.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:05.162Z,1528900205.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:05.542Z,1528900205.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:05.560Z,1528900205.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:05.944Z,1528900205.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:05.962Z,1528900205.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:06.346Z,1528900206.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:06.364Z,1528900206.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:06.749Z,1528900206.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:06.767Z,1528900206.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:07.153Z,1528900207.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:07.171Z,1528900207.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:07.550Z,1528900207.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:07.568Z,1528900207.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:07.942Z,1528900207.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:07.960Z,1528900207.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:08.344Z,1528900208.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:08.362Z,1528900208.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:08.744Z,1528900208.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:08.762Z,1528900208.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:09.144Z,1528900209.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:09.162Z,1528900209.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:09.544Z,1528900209.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:09.562Z,1528900209.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:09.949Z,1528900209.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:09.968Z,1528900209.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:10.349Z,1528900210.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:10.372Z,1528900210.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:10.750Z,1528900210.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:10.767Z,1528900210.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:11.144Z,1528900211.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:11.163Z,1528900211.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:11.545Z,1528900211.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:11.563Z,1528900211.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:11.947Z,1528900211.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:11.964Z,1528900211.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:12.345Z,1528900212.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:12.363Z,1528900212.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:15.554Z,1528900215.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:15.572Z,1528900215.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:15.576Z,1528900215.576 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T14:25:15.2Z
2018-06-13T14:30:15.576Z,1528900215.576 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T14:30:15.576Z,1528900215.576 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T14:30:15.721Z,1528900215.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:15.756Z,1528900215.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:16.877Z,1528900216.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:16.906Z,1528900216.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:17.019Z,1528900217.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:17.060Z,1528900217.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:17.417Z,1528900217.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:17.456Z,1528900217.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:17.816Z,1528900217.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:17.854Z,1528900217.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:18.217Z,1528900218.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:18.258Z,1528900218.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:18.619Z,1528900218.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:18.658Z,1528900218.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:19.030Z,1528900219.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:19.065Z,1528900219.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:19.431Z,1528900219.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:19.480Z,1528900219.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:19.833Z,1528900219.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:19.868Z,1528900219.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:20.217Z,1528900220.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:20.262Z,1528900220.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:20.616Z,1528900220.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:20.671Z,1528900220.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:21.016Z,1528900221.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:21.035Z,1528900221.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:21.415Z,1528900221.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:21.439Z,1528900221.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:24.542Z,1528900224.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:24.572Z,1528900224.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:24.657Z,1528900224.657 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0256.lzma
2018-06-13T14:30:24.710Z,1528900224.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:24.728Z,1528900224.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:25.098Z,1528900225.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:25.123Z,1528900225.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:25.462Z,1528900225.462 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0256.lzma.bak
2018-06-13T14:30:25.462Z,1528900225.462 [DataOverHttps](INFO): SBD MOMSN=8329381
2018-06-13T14:30:25.506Z,1528900225.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:25.528Z,1528900225.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:27.424Z,1528900227.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:27.442Z,1528900227.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:27.582Z,1528900227.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:27.628Z,1528900227.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:28.009Z,1528900228.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:28.027Z,1528900228.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:28.412Z,1528900228.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:28.430Z,1528900228.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:28.804Z,1528900228.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:28.828Z,1528900228.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:31.915Z,1528900231.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:31.933Z,1528900231.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:32.036Z,1528900232.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:32.075Z,1528900232.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:32.459Z,1528900232.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:32.477Z,1528900232.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:32.864Z,1528900232.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:32.882Z,1528900232.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:33.260Z,1528900233.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:33.278Z,1528900233.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:33.643Z,1528900233.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:33.670Z,1528900233.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:34.044Z,1528900234.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:34.080Z,1528900234.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:34.439Z,1528900234.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:34.471Z,1528900234.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:34.859Z,1528900234.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:34.877Z,1528900234.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:37.985Z,1528900237.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:38.027Z,1528900238.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:38.121Z,1528900238.121 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0257.lzma
2018-06-13T14:30:38.167Z,1528900238.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:38.219Z,1528900238.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:38.547Z,1528900238.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:38.580Z,1528900238.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:38.922Z,1528900238.922 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0257.lzma.bak
2018-06-13T14:30:38.922Z,1528900238.922 [DataOverHttps](INFO): SBD MOMSN=8329384
2018-06-13T14:30:38.952Z,1528900238.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:38.991Z,1528900238.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:40.861Z,1528900240.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:40.879Z,1528900240.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:40.882Z,1528900240.882 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T14:30:40.882Z,1528900240.882 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T14:30:40.883Z,1528900240.883 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T14:30:41.006Z,1528900241.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:41.040Z,1528900241.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:44.163Z,1528900244.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:44.181Z,1528900244.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:44.310Z,1528900244.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:44.327Z,1528900244.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:44.697Z,1528900244.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:44.732Z,1528900244.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:45.108Z,1528900245.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:45.126Z,1528900245.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:45.491Z,1528900245.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:45.524Z,1528900245.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:45.913Z,1528900245.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:45.931Z,1528900245.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:46.311Z,1528900246.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:46.336Z,1528900246.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:46.717Z,1528900246.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:46.735Z,1528900246.735 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:46.735Z,1528900246.735 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 221
2018-06-13T14:30:46.735Z,1528900246.735 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:30:46.737Z,1528900246.737 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:46.737Z,1528900246.737 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 221
2018-06-13T14:30:46.737Z,1528900246.737 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:30:46.739Z,1528900246.739 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:46.739Z,1528900246.739 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 221
2018-06-13T14:30:46.739Z,1528900246.739 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:30:46.817Z,1528900246.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:30:46.817Z,1528900246.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:30:46.818Z,1528900246.818 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:30:47.099Z,1528900247.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:47.205Z,1528900247.205 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:30:47.205Z,1528900247.205 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 221
2018-06-13T14:30:47.206Z,1528900247.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:30:47.206Z,1528900247.206 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 221
2018-06-13T14:30:47.206Z,1528900247.206 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:30:47.206Z,1528900247.206 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 221
2018-06-13T14:30:47.492Z,1528900247.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:47.525Z,1528900247.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:30:47.525Z,1528900247.525 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:30:47.526Z,1528900247.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:30:47.526Z,1528900247.526 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:30:47.526Z,1528900247.526 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:30:47.527Z,1528900247.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:30:47.527Z,1528900247.527 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:30:47.527Z,1528900247.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:30:47.528Z,1528900247.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:30:47.892Z,1528900247.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:47.912Z,1528900247.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:30:47.929Z,1528900247.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:48.300Z,1528900248.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:48.334Z,1528900248.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:30:48.335Z,1528900248.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:48.700Z,1528900248.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:48.719Z,1528900248.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:30:48.720Z,1528900248.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:49.110Z,1528900249.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:49.148Z,1528900249.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:30:49.153Z,1528900249.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:49.508Z,1528900249.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:49.526Z,1528900249.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:30:49.527Z,1528900249.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:49.906Z,1528900249.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:49.924Z,1528900249.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:30:49.925Z,1528900249.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:50.296Z,1528900250.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:50.314Z,1528900250.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:30:50.315Z,1528900250.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:50.702Z,1528900250.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:50.720Z,1528900250.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:30:50.721Z,1528900250.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:51.099Z,1528900251.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:51.127Z,1528900251.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:30:51.128Z,1528900251.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:51.501Z,1528900251.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:51.519Z,1528900251.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:30:51.520Z,1528900251.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:51.906Z,1528900251.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:51.928Z,1528900251.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:30:51.929Z,1528900251.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:52.310Z,1528900252.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:52.332Z,1528900252.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:30:52.349Z,1528900252.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:52.708Z,1528900252.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:52.727Z,1528900252.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:30:52.728Z,1528900252.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:53.097Z,1528900253.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:53.122Z,1528900253.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:30:53.123Z,1528900253.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:53.505Z,1528900253.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:53.523Z,1528900253.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:30:53.524Z,1528900253.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:53.899Z,1528900253.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:53.924Z,1528900253.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:30:53.925Z,1528900253.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:54.295Z,1528900254.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:54.323Z,1528900254.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:30:54.324Z,1528900254.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:54.697Z,1528900254.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:54.723Z,1528900254.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:30:54.724Z,1528900254.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:55.102Z,1528900255.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:55.132Z,1528900255.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:30:55.137Z,1528900255.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:55.510Z,1528900255.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:55.528Z,1528900255.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:30:55.529Z,1528900255.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:55.914Z,1528900255.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:55.932Z,1528900255.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:30:55.933Z,1528900255.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:56.287Z,1528900256.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:56.321Z,1528900256.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:30:56.322Z,1528900256.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:56.695Z,1528900256.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:56.720Z,1528900256.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:30:56.725Z,1528900256.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:57.101Z,1528900257.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:57.119Z,1528900257.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:30:57.120Z,1528900257.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:57.487Z,1528900257.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:57.532Z,1528900257.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:30:57.533Z,1528900257.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:57.909Z,1528900257.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:57.953Z,1528900257.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:30:57.954Z,1528900257.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:58.315Z,1528900258.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:58.333Z,1528900258.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:30:58.334Z,1528900258.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:58.702Z,1528900258.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:58.733Z,1528900258.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:30:58.734Z,1528900258.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:59.091Z,1528900259.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:59.136Z,1528900259.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:30:59.137Z,1528900259.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:59.491Z,1528900259.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:59.540Z,1528900259.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:30:59.540Z,1528900259.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:30:59.888Z,1528900259.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:30:59.924Z,1528900259.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:30:59.929Z,1528900259.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:00.295Z,1528900260.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:00.323Z,1528900260.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:31:00.324Z,1528900260.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:00.695Z,1528900260.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:00.728Z,1528900260.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:31:00.730Z,1528900260.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:01.116Z,1528900261.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:01.133Z,1528900261.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:31:01.134Z,1528900261.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:01.511Z,1528900261.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:01.542Z,1528900261.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:31:01.543Z,1528900261.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:01.910Z,1528900261.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:01.942Z,1528900261.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:31:01.943Z,1528900261.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:02.287Z,1528900262.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:02.322Z,1528900262.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:31:02.322Z,1528900262.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:02.691Z,1528900262.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:02.731Z,1528900262.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:31:02.732Z,1528900262.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:03.107Z,1528900263.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:03.125Z,1528900263.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:31:03.126Z,1528900263.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:03.490Z,1528900263.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:03.531Z,1528900263.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:31:03.532Z,1528900263.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:03.908Z,1528900263.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:03.958Z,1528900263.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:31:03.959Z,1528900263.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:04.316Z,1528900264.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:04.359Z,1528900264.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:31:04.360Z,1528900264.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:04.706Z,1528900264.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:04.729Z,1528900264.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:31:04.730Z,1528900264.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:05.095Z,1528900265.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:05.132Z,1528900265.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:31:05.133Z,1528900265.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:05.491Z,1528900265.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:05.536Z,1528900265.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:31:05.536Z,1528900265.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:05.891Z,1528900265.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:05.923Z,1528900265.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:31:05.924Z,1528900265.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:06.292Z,1528900266.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:06.333Z,1528900266.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:31:06.334Z,1528900266.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:06.693Z,1528900266.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:06.733Z,1528900266.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T14:31:06.734Z,1528900266.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:07.101Z,1528900267.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:07.152Z,1528900267.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:07.515Z,1528900267.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:07.566Z,1528900267.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:07.920Z,1528900267.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:07.938Z,1528900267.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:08.287Z,1528900268.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:08.326Z,1528900268.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:08.691Z,1528900268.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:08.739Z,1528900268.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:09.092Z,1528900269.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:09.127Z,1528900269.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:09.491Z,1528900269.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:09.535Z,1528900269.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:09.904Z,1528900269.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:09.934Z,1528900269.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:10.305Z,1528900270.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:10.355Z,1528900270.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:10.701Z,1528900270.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:10.739Z,1528900270.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:11.091Z,1528900271.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:11.126Z,1528900271.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:11.497Z,1528900271.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:11.534Z,1528900271.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:11.894Z,1528900271.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:11.942Z,1528900271.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:12.294Z,1528900272.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:12.312Z,1528900272.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:12.694Z,1528900272.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:12.718Z,1528900272.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:13.099Z,1528900273.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:13.120Z,1528900273.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:13.505Z,1528900273.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:13.555Z,1528900273.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:13.906Z,1528900273.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:13.949Z,1528900273.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:14.293Z,1528900274.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:14.315Z,1528900274.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:14.697Z,1528900274.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:14.720Z,1528900274.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:15.096Z,1528900275.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:15.146Z,1528900275.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:15.491Z,1528900275.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:15.522Z,1528900275.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:15.902Z,1528900275.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:15.928Z,1528900275.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:16.308Z,1528900276.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:16.327Z,1528900276.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:16.703Z,1528900276.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:16.748Z,1528900276.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:17.096Z,1528900277.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:17.114Z,1528900277.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:17.498Z,1528900277.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:17.520Z,1528900277.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:17.891Z,1528900277.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:17.919Z,1528900277.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:18.298Z,1528900278.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:18.315Z,1528900278.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:18.698Z,1528900278.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:18.717Z,1528900278.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:19.102Z,1528900279.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:19.128Z,1528900279.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:19.511Z,1528900279.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:19.547Z,1528900279.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:19.906Z,1528900279.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:19.992Z,1528900279.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:20.297Z,1528900280.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:20.315Z,1528900280.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:20.695Z,1528900280.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:20.733Z,1528900280.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:21.099Z,1528900281.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:21.122Z,1528900281.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:21.499Z,1528900281.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:21.555Z,1528900281.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:21.908Z,1528900281.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:21.944Z,1528900281.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:22.301Z,1528900282.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:22.352Z,1528900282.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:22.698Z,1528900282.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:22.803Z,1528900282.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:23.087Z,1528900283.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:23.164Z,1528900283.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:23.491Z,1528900283.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:23.633Z,1528900283.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:23.891Z,1528900283.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:23.912Z,1528900283.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:24.298Z,1528900284.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:24.320Z,1528900284.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:24.692Z,1528900284.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:24.732Z,1528900284.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:25.098Z,1528900285.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:25.116Z,1528900285.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:25.505Z,1528900285.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:25.540Z,1528900285.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:25.906Z,1528900285.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:25.945Z,1528900285.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:26.297Z,1528900286.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:26.315Z,1528900286.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:26.696Z,1528900286.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:26.742Z,1528900286.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:27.099Z,1528900287.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:27.117Z,1528900287.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:27.491Z,1528900287.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:27.515Z,1528900287.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:27.902Z,1528900287.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:27.928Z,1528900287.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:28.310Z,1528900288.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:28.328Z,1528900288.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:28.706Z,1528900288.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:28.724Z,1528900288.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:29.097Z,1528900289.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:29.115Z,1528900289.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:29.494Z,1528900289.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:29.511Z,1528900289.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:29.887Z,1528900289.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:29.921Z,1528900289.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:30.290Z,1528900290.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:30.320Z,1528900290.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:30.691Z,1528900290.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:30.719Z,1528900290.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:31.108Z,1528900291.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:31.126Z,1528900291.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:31.512Z,1528900291.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:31.529Z,1528900291.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:31.907Z,1528900291.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:31.938Z,1528900291.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:32.287Z,1528900292.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:32.321Z,1528900292.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:32.691Z,1528900292.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:32.718Z,1528900292.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:33.088Z,1528900293.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:33.127Z,1528900293.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:33.487Z,1528900293.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:33.523Z,1528900293.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:33.907Z,1528900293.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:33.925Z,1528900293.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:34.308Z,1528900294.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:34.325Z,1528900294.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:34.697Z,1528900294.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:34.731Z,1528900294.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:35.091Z,1528900295.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:35.132Z,1528900295.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:35.491Z,1528900295.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:35.524Z,1528900295.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:35.887Z,1528900295.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:35.923Z,1528900295.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:36.292Z,1528900296.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:36.323Z,1528900296.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:36.687Z,1528900296.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:36.724Z,1528900296.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:37.097Z,1528900297.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:37.138Z,1528900297.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:37.511Z,1528900297.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:37.529Z,1528900297.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:37.911Z,1528900297.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:37.940Z,1528900297.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:38.287Z,1528900298.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:38.320Z,1528900298.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:38.691Z,1528900298.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:38.724Z,1528900298.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:39.087Z,1528900299.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:39.105Z,1528900299.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:39.491Z,1528900299.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:39.508Z,1528900299.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:39.905Z,1528900299.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:39.936Z,1528900299.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:40.305Z,1528900300.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:40.332Z,1528900300.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:40.705Z,1528900300.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:40.731Z,1528900300.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:41.098Z,1528900301.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:41.116Z,1528900301.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:41.495Z,1528900301.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:41.513Z,1528900301.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:44.618Z,1528900304.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:44.645Z,1528900304.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:44.760Z,1528900304.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:44.800Z,1528900304.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:45.174Z,1528900305.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:45.204Z,1528900305.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:45.569Z,1528900305.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:45.607Z,1528900305.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:45.971Z,1528900305.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:46.008Z,1528900306.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:46.355Z,1528900306.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:46.396Z,1528900306.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:46.754Z,1528900306.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:46.799Z,1528900306.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:47.156Z,1528900307.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:47.204Z,1528900307.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:47.551Z,1528900307.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:47.570Z,1528900307.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:47.973Z,1528900307.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:48.001Z,1528900308.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:48.374Z,1528900308.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:48.401Z,1528900308.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:48.773Z,1528900308.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:48.812Z,1528900308.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:49.159Z,1528900309.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:49.204Z,1528900309.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:49.559Z,1528900309.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:49.597Z,1528900309.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:49.960Z,1528900309.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:49.981Z,1528900309.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:50.354Z,1528900310.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:50.409Z,1528900310.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:50.762Z,1528900310.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:50.786Z,1528900310.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:51.164Z,1528900311.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:51.187Z,1528900311.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:51.571Z,1528900311.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:51.606Z,1528900311.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:51.966Z,1528900311.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:52.012Z,1528900312.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:52.360Z,1528900312.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:52.380Z,1528900312.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:52.762Z,1528900312.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:52.784Z,1528900312.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:53.162Z,1528900313.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:53.182Z,1528900313.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:53.558Z,1528900313.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:53.585Z,1528900313.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:53.966Z,1528900313.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:54.001Z,1528900314.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:54.370Z,1528900314.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:54.392Z,1528900314.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:54.772Z,1528900314.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:54.815Z,1528900314.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:55.161Z,1528900315.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:55.211Z,1528900315.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:55.561Z,1528900315.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:55.579Z,1528900315.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:55.961Z,1528900315.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:55.984Z,1528900315.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:56.361Z,1528900316.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:56.410Z,1528900316.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:56.760Z,1528900316.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:56.814Z,1528900316.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:57.170Z,1528900317.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:57.194Z,1528900317.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:57.571Z,1528900317.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:57.593Z,1528900317.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:57.971Z,1528900317.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:57.991Z,1528900317.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:58.362Z,1528900318.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:58.389Z,1528900318.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:58.761Z,1528900318.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:58.779Z,1528900318.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:59.159Z,1528900319.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:59.188Z,1528900319.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:59.563Z,1528900319.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:59.585Z,1528900319.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:31:59.970Z,1528900319.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:31:59.988Z,1528900319.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:00.370Z,1528900320.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:00.396Z,1528900320.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:00.770Z,1528900320.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:00.796Z,1528900320.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:01.161Z,1528900321.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:01.184Z,1528900321.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:01.559Z,1528900321.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:01.582Z,1528900321.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:01.962Z,1528900321.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:01.979Z,1528900321.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:02.366Z,1528900322.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:02.387Z,1528900322.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:02.761Z,1528900322.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:02.784Z,1528900322.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:03.170Z,1528900323.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:03.192Z,1528900323.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:03.570Z,1528900323.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:03.592Z,1528900323.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:03.971Z,1528900323.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:03.993Z,1528900323.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:04.363Z,1528900324.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:04.387Z,1528900324.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:04.761Z,1528900324.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:04.779Z,1528900324.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:05.162Z,1528900325.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:05.180Z,1528900325.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:05.559Z,1528900325.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:05.583Z,1528900325.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:05.971Z,1528900325.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:05.994Z,1528900325.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:06.376Z,1528900326.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:06.394Z,1528900326.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:06.776Z,1528900326.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:06.794Z,1528900326.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:07.162Z,1528900327.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:07.179Z,1528900327.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:07.561Z,1528900327.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:07.579Z,1528900327.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:07.962Z,1528900327.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:07.985Z,1528900327.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:08.362Z,1528900328.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:08.385Z,1528900328.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:08.765Z,1528900328.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:08.788Z,1528900328.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:09.177Z,1528900329.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:09.200Z,1528900329.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:09.571Z,1528900329.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:09.589Z,1528900329.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:09.971Z,1528900329.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:09.989Z,1528900329.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:10.363Z,1528900330.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:10.380Z,1528900330.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:10.762Z,1528900330.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:10.784Z,1528900330.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:11.164Z,1528900331.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:11.181Z,1528900331.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:11.551Z,1528900331.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:11.581Z,1528900331.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:11.968Z,1528900331.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:11.986Z,1528900331.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:12.376Z,1528900332.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:12.399Z,1528900332.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:12.776Z,1528900332.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:12.800Z,1528900332.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:13.151Z,1528900333.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:13.189Z,1528900333.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:13.555Z,1528900333.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:13.590Z,1528900333.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:13.955Z,1528900333.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:13.983Z,1528900333.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:14.356Z,1528900334.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:14.383Z,1528900334.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:14.755Z,1528900334.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:14.788Z,1528900334.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:15.172Z,1528900335.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:15.190Z,1528900335.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:15.572Z,1528900335.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:15.590Z,1528900335.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:15.972Z,1528900335.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:15.990Z,1528900335.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:16.355Z,1528900336.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:16.388Z,1528900336.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:16.751Z,1528900336.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:16.780Z,1528900336.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:17.155Z,1528900337.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:17.193Z,1528900337.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:17.555Z,1528900337.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:17.589Z,1528900337.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:17.962Z,1528900337.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:17.992Z,1528900337.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:18.373Z,1528900338.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:18.400Z,1528900338.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:18.773Z,1528900338.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:18.807Z,1528900338.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:19.152Z,1528900339.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:19.170Z,1528900339.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:19.558Z,1528900339.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:19.576Z,1528900339.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:19.958Z,1528900339.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:19.976Z,1528900339.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:20.358Z,1528900340.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:20.376Z,1528900340.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:20.759Z,1528900340.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:20.776Z,1528900340.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:21.169Z,1528900341.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:21.187Z,1528900341.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:21.565Z,1528900341.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:21.583Z,1528900341.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:21.966Z,1528900341.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:21.983Z,1528900341.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:22.362Z,1528900342.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:22.380Z,1528900342.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:22.762Z,1528900342.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:22.784Z,1528900342.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:23.162Z,1528900343.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:23.180Z,1528900343.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:23.559Z,1528900343.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:23.592Z,1528900343.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:23.971Z,1528900343.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:23.996Z,1528900343.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:24.370Z,1528900344.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:24.392Z,1528900344.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:24.771Z,1528900344.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:24.790Z,1528900344.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:25.161Z,1528900345.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:25.184Z,1528900345.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:25.559Z,1528900345.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:25.583Z,1528900345.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:25.963Z,1528900345.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:25.988Z,1528900345.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:26.352Z,1528900346.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:26.387Z,1528900346.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:26.755Z,1528900346.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:26.792Z,1528900346.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:27.174Z,1528900347.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:27.204Z,1528900347.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:27.576Z,1528900347.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:27.594Z,1528900347.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:27.972Z,1528900347.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:27.990Z,1528900347.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:28.355Z,1528900348.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:28.385Z,1528900348.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:28.755Z,1528900348.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:28.783Z,1528900348.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:29.156Z,1528900349.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:29.192Z,1528900349.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:29.555Z,1528900349.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:29.585Z,1528900349.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:29.971Z,1528900349.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:29.990Z,1528900349.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:30.376Z,1528900350.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:30.400Z,1528900350.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:30.772Z,1528900350.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:30.790Z,1528900350.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:31.151Z,1528900351.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:31.187Z,1528900351.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:31.555Z,1528900351.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:31.582Z,1528900351.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:31.955Z,1528900351.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:31.984Z,1528900351.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:32.351Z,1528900352.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:32.387Z,1528900352.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:32.755Z,1528900352.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:32.782Z,1528900352.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:33.176Z,1528900353.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:33.194Z,1528900353.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:33.571Z,1528900353.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:33.589Z,1528900353.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:33.971Z,1528900353.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:33.989Z,1528900353.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:34.355Z,1528900354.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:34.387Z,1528900354.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:34.755Z,1528900354.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:34.787Z,1528900354.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:35.156Z,1528900355.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:35.187Z,1528900355.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:35.555Z,1528900355.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:35.589Z,1528900355.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:35.972Z,1528900355.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:35.990Z,1528900355.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:36.375Z,1528900356.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:36.394Z,1528900356.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:36.776Z,1528900356.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:36.794Z,1528900356.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:37.155Z,1528900357.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:37.187Z,1528900357.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:37.555Z,1528900357.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:37.587Z,1528900357.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:37.955Z,1528900357.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:37.994Z,1528900357.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:38.356Z,1528900358.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:38.390Z,1528900358.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:38.755Z,1528900358.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:38.772Z,1528900358.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:39.170Z,1528900359.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:39.200Z,1528900359.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:39.565Z,1528900359.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:39.599Z,1528900359.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:39.965Z,1528900359.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:39.999Z,1528900359.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:40.355Z,1528900360.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:40.373Z,1528900360.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:40.755Z,1528900360.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:40.773Z,1528900360.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:41.159Z,1528900361.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:41.178Z,1528900361.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:41.560Z,1528900361.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:41.590Z,1528900361.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:44.685Z,1528900364.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:44.717Z,1528900364.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:44.850Z,1528900364.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:44.906Z,1528900364.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:45.249Z,1528900365.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:45.272Z,1528900365.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:45.624Z,1528900365.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:45.670Z,1528900365.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:46.019Z,1528900366.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:46.069Z,1528900366.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:46.424Z,1528900366.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:46.442Z,1528900366.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:46.827Z,1528900366.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:46.845Z,1528900366.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:47.239Z,1528900367.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:47.281Z,1528900367.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:47.637Z,1528900367.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:47.676Z,1528900367.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:48.042Z,1528900368.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:48.059Z,1528900368.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:48.429Z,1528900368.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:48.447Z,1528900368.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:48.830Z,1528900368.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:48.848Z,1528900368.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:49.230Z,1528900369.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:49.252Z,1528900369.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:49.627Z,1528900369.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:49.649Z,1528900369.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:50.038Z,1528900370.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:50.056Z,1528900370.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:50.434Z,1528900370.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:50.457Z,1528900370.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:50.834Z,1528900370.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:50.858Z,1528900370.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:51.230Z,1528900371.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:51.248Z,1528900371.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:51.630Z,1528900371.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:51.648Z,1528900371.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:52.027Z,1528900372.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:52.051Z,1528900372.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:52.428Z,1528900372.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:52.466Z,1528900372.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:52.819Z,1528900372.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:52.860Z,1528900372.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:53.239Z,1528900373.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:53.258Z,1528900373.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:53.643Z,1528900373.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:53.663Z,1528900373.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:54.040Z,1528900374.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:54.067Z,1528900374.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:54.420Z,1528900374.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:54.455Z,1528900374.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:54.828Z,1528900374.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:54.863Z,1528900374.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:55.220Z,1528900375.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:55.250Z,1528900375.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:55.624Z,1528900375.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:55.667Z,1528900375.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:56.042Z,1528900376.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:56.075Z,1528900376.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:56.442Z,1528900376.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:56.459Z,1528900376.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:56.838Z,1528900376.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:56.864Z,1528900376.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:57.223Z,1528900377.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:57.260Z,1528900377.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:57.619Z,1528900377.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:57.653Z,1528900377.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:58.023Z,1528900378.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:58.040Z,1528900378.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:58.424Z,1528900378.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:58.442Z,1528900378.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:58.827Z,1528900378.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:58.872Z,1528900378.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:59.237Z,1528900379.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:59.274Z,1528900379.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:32:59.641Z,1528900379.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:32:59.677Z,1528900379.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:00.030Z,1528900380.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:00.047Z,1528900380.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:00.426Z,1528900380.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:00.448Z,1528900380.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:00.826Z,1528900380.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:00.844Z,1528900380.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:01.229Z,1528900381.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:01.247Z,1528900381.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:01.628Z,1528900381.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:01.671Z,1528900381.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:02.037Z,1528900382.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:02.056Z,1528900382.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:02.433Z,1528900382.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:02.451Z,1528900382.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:02.834Z,1528900382.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:02.852Z,1528900382.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:03.230Z,1528900383.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:03.248Z,1528900383.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:03.629Z,1528900383.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:03.648Z,1528900383.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:04.027Z,1528900384.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:04.061Z,1528900384.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:04.428Z,1528900384.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:04.456Z,1528900384.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:04.819Z,1528900384.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:04.855Z,1528900384.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:05.239Z,1528900385.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:05.257Z,1528900385.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:05.643Z,1528900385.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:05.669Z,1528900385.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:06.034Z,1528900386.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:06.061Z,1528900386.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:06.424Z,1528900386.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:06.458Z,1528900386.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:06.823Z,1528900386.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:06.858Z,1528900386.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:07.224Z,1528900387.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:07.244Z,1528900387.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:07.627Z,1528900387.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:07.644Z,1528900387.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:08.037Z,1528900388.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:08.068Z,1528900388.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:08.434Z,1528900388.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:08.452Z,1528900388.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:08.834Z,1528900388.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:08.851Z,1528900388.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:09.230Z,1528900389.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:09.248Z,1528900389.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:09.623Z,1528900389.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:09.653Z,1528900389.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:10.027Z,1528900390.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:10.049Z,1528900390.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:10.428Z,1528900390.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:10.459Z,1528900390.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:10.833Z,1528900390.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:10.856Z,1528900390.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:11.238Z,1528900391.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:11.256Z,1528900391.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:11.639Z,1528900391.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:11.657Z,1528900391.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:12.034Z,1528900392.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:12.065Z,1528900392.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:12.427Z,1528900392.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:12.461Z,1528900392.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:12.824Z,1528900392.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:12.855Z,1528900392.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:13.224Z,1528900393.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:13.253Z,1528900393.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:13.623Z,1528900393.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:13.651Z,1528900393.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:14.044Z,1528900394.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:14.062Z,1528900394.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:14.440Z,1528900394.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:14.464Z,1528900394.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:14.839Z,1528900394.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:14.858Z,1528900394.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:15.223Z,1528900395.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:15.259Z,1528900395.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:15.623Z,1528900395.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:15.651Z,1528900395.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:16.024Z,1528900396.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:16.058Z,1528900396.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:16.424Z,1528900396.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:16.464Z,1528900396.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:16.823Z,1528900396.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:16.857Z,1528900396.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:17.233Z,1528900397.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:17.274Z,1528900397.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:17.637Z,1528900397.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:17.666Z,1528900397.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:18.034Z,1528900398.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:18.067Z,1528900398.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:18.423Z,1528900398.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:18.441Z,1528900398.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:18.824Z,1528900398.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:18.859Z,1528900398.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:19.226Z,1528900399.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:19.244Z,1528900399.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:19.626Z,1528900399.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:19.644Z,1528900399.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:20.038Z,1528900400.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:20.072Z,1528900400.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:20.433Z,1528900400.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:20.451Z,1528900400.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:20.837Z,1528900400.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:20.855Z,1528900400.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:21.230Z,1528900401.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:21.248Z,1528900401.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:21.623Z,1528900401.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:21.646Z,1528900401.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:22.027Z,1528900402.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:22.049Z,1528900402.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:22.428Z,1528900402.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:22.455Z,1528900402.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:22.830Z,1528900402.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:22.848Z,1528900402.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:23.238Z,1528900403.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:23.256Z,1528900403.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:23.638Z,1528900403.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:23.656Z,1528900403.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:24.035Z,1528900404.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:24.052Z,1528900404.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:24.427Z,1528900404.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:24.450Z,1528900404.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:24.830Z,1528900404.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:24.849Z,1528900404.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:25.229Z,1528900405.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:25.247Z,1528900405.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:25.629Z,1528900405.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:25.647Z,1528900405.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:26.039Z,1528900406.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:26.057Z,1528900406.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:26.442Z,1528900406.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:26.460Z,1528900406.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:26.838Z,1528900406.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:26.857Z,1528900406.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:27.230Z,1528900407.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:27.252Z,1528900407.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:27.620Z,1528900407.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:27.648Z,1528900407.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:28.027Z,1528900408.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:28.061Z,1528900408.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:28.424Z,1528900408.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:28.462Z,1528900408.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:28.823Z,1528900408.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:28.855Z,1528900408.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:29.239Z,1528900409.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:29.257Z,1528900409.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:29.642Z,1528900409.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:29.668Z,1528900409.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:30.033Z,1528900410.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:30.060Z,1528900410.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:30.423Z,1528900410.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:30.457Z,1528900410.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:30.823Z,1528900410.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:30.841Z,1528900410.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:31.224Z,1528900411.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:31.242Z,1528900411.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:31.627Z,1528900411.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:31.645Z,1528900411.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:32.037Z,1528900412.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:32.071Z,1528900412.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:32.437Z,1528900412.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:32.470Z,1528900412.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:32.841Z,1528900412.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:32.867Z,1528900412.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:33.225Z,1528900413.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:33.248Z,1528900413.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:33.624Z,1528900413.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:33.642Z,1528900413.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:34.027Z,1528900414.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:34.045Z,1528900414.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:34.427Z,1528900414.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:34.445Z,1528900414.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:34.825Z,1528900414.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:34.843Z,1528900414.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:35.238Z,1528900415.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:35.272Z,1528900415.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:35.638Z,1528900415.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:35.656Z,1528900415.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:36.034Z,1528900416.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:36.052Z,1528900416.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:36.428Z,1528900416.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:36.453Z,1528900416.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:36.826Z,1528900416.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:36.843Z,1528900416.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:37.226Z,1528900417.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:37.244Z,1528900417.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:37.628Z,1528900417.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:37.646Z,1528900417.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:38.037Z,1528900418.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:38.055Z,1528900418.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:38.433Z,1528900418.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:38.452Z,1528900418.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:38.834Z,1528900418.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:38.851Z,1528900418.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:39.226Z,1528900419.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:39.244Z,1528900419.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:39.623Z,1528900419.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:39.653Z,1528900419.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:40.027Z,1528900420.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:40.049Z,1528900420.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:40.430Z,1528900420.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:40.447Z,1528900420.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:40.823Z,1528900420.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:40.846Z,1528900420.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:41.242Z,1528900421.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:41.260Z,1528900421.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:41.637Z,1528900421.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:41.654Z,1528900421.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:44.754Z,1528900424.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:44.788Z,1528900424.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:44.903Z,1528900424.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:44.955Z,1528900424.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:45.304Z,1528900425.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:45.344Z,1528900425.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:45.702Z,1528900425.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:45.720Z,1528900425.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:46.113Z,1528900426.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:46.148Z,1528900426.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:46.517Z,1528900426.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:46.552Z,1528900426.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:46.910Z,1528900426.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:46.946Z,1528900426.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:47.303Z,1528900427.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:47.320Z,1528900427.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:47.701Z,1528900427.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:47.719Z,1528900427.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:47.719Z,1528900427.719 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 222
2018-06-13T14:33:47.719Z,1528900427.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:33:47.721Z,1528900427.721 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:47.721Z,1528900427.721 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 222
2018-06-13T14:33:47.721Z,1528900427.721 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:33:47.723Z,1528900427.723 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:47.723Z,1528900427.723 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 222
2018-06-13T14:33:47.723Z,1528900427.723 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:33:47.837Z,1528900427.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:33:47.837Z,1528900427.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:33:47.837Z,1528900427.837 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:33:48.101Z,1528900428.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:48.198Z,1528900428.198 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:33:48.198Z,1528900428.198 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 222
2018-06-13T14:33:48.198Z,1528900428.198 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:33:48.198Z,1528900428.198 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 222
2018-06-13T14:33:48.199Z,1528900428.199 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:33:48.199Z,1528900428.199 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 222
2018-06-13T14:33:48.504Z,1528900428.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:48.521Z,1528900428.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:33:48.521Z,1528900428.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:33:48.521Z,1528900428.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:33:48.522Z,1528900428.522 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:33:48.522Z,1528900428.522 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:33:48.523Z,1528900428.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:33:48.523Z,1528900428.523 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:33:48.523Z,1528900428.523 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:33:48.524Z,1528900428.524 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:33:48.905Z,1528900428.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:48.927Z,1528900428.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:33:48.928Z,1528900428.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:49.311Z,1528900429.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:49.336Z,1528900429.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:33:49.357Z,1528900429.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:49.714Z,1528900429.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:49.731Z,1528900429.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:33:49.732Z,1528900429.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:50.111Z,1528900430.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:50.128Z,1528900430.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:33:50.129Z,1528900430.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:50.499Z,1528900430.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:50.522Z,1528900430.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:33:50.523Z,1528900430.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:50.903Z,1528900430.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:50.925Z,1528900430.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:33:50.926Z,1528900430.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:51.303Z,1528900431.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:51.328Z,1528900431.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:33:51.329Z,1528900431.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:51.695Z,1528900431.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:51.731Z,1528900431.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:33:51.731Z,1528900431.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:52.119Z,1528900432.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:52.144Z,1528900432.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:33:52.144Z,1528900432.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:52.515Z,1528900432.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:52.532Z,1528900432.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:33:52.533Z,1528900432.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:52.905Z,1528900432.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:52.944Z,1528900432.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:33:52.945Z,1528900432.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:53.299Z,1528900433.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:53.334Z,1528900433.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:33:53.335Z,1528900433.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:53.695Z,1528900433.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:53.732Z,1528900433.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:33:53.733Z,1528900433.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:54.095Z,1528900434.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:54.140Z,1528900434.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:33:54.141Z,1528900434.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:54.500Z,1528900434.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:54.533Z,1528900434.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:33:54.534Z,1528900434.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:54.895Z,1528900434.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:54.912Z,1528900434.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:33:54.913Z,1528900434.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:55.309Z,1528900435.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:55.343Z,1528900435.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:33:55.344Z,1528900435.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:55.713Z,1528900435.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:55.744Z,1528900435.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:33:55.745Z,1528900435.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:56.109Z,1528900436.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:56.144Z,1528900436.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:33:56.145Z,1528900436.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:56.499Z,1528900436.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:56.516Z,1528900436.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:33:56.517Z,1528900436.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:56.903Z,1528900436.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:56.924Z,1528900436.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:33:56.941Z,1528900436.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:57.299Z,1528900437.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:57.316Z,1528900437.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:33:57.317Z,1528900437.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:57.698Z,1528900437.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:57.724Z,1528900437.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:33:57.729Z,1528900437.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:58.109Z,1528900438.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:58.127Z,1528900438.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:33:58.128Z,1528900438.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:58.509Z,1528900438.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:58.527Z,1528900438.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:33:58.528Z,1528900438.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:58.910Z,1528900438.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:58.928Z,1528900438.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:33:58.929Z,1528900438.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:59.304Z,1528900439.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:59.329Z,1528900439.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:33:59.330Z,1528900439.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:33:59.706Z,1528900439.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:33:59.724Z,1528900439.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:33:59.725Z,1528900439.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:00.105Z,1528900440.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:00.124Z,1528900440.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:34:00.125Z,1528900440.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:00.503Z,1528900440.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:00.527Z,1528900440.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:34:00.528Z,1528900440.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:00.901Z,1528900440.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:00.920Z,1528900440.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:34:00.921Z,1528900440.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:01.311Z,1528900441.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:01.330Z,1528900441.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:34:01.330Z,1528900441.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:01.719Z,1528900441.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:01.737Z,1528900441.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:34:01.738Z,1528900441.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:02.116Z,1528900442.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:02.133Z,1528900442.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:34:02.134Z,1528900442.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:02.503Z,1528900442.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:02.526Z,1528900442.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:34:02.527Z,1528900442.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:02.903Z,1528900442.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:02.926Z,1528900442.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:34:02.927Z,1528900442.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:03.306Z,1528900443.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:03.323Z,1528900443.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:34:03.324Z,1528900443.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:03.706Z,1528900443.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:03.724Z,1528900443.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:34:03.725Z,1528900443.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:04.115Z,1528900444.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:04.140Z,1528900444.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:34:04.141Z,1528900444.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:04.520Z,1528900444.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:04.537Z,1528900444.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:34:04.538Z,1528900444.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:04.915Z,1528900444.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:04.940Z,1528900444.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:34:04.942Z,1528900444.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:05.299Z,1528900445.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:05.325Z,1528900445.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:34:05.326Z,1528900445.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:05.695Z,1528900445.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:05.732Z,1528900445.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:34:05.733Z,1528900445.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:06.099Z,1528900446.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:06.126Z,1528900446.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:34:06.126Z,1528900446.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:06.499Z,1528900446.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:06.534Z,1528900446.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:34:06.534Z,1528900446.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:06.899Z,1528900446.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:06.936Z,1528900446.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:34:06.937Z,1528900446.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:07.316Z,1528900447.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:07.333Z,1528900447.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:34:07.334Z,1528900447.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:07.709Z,1528900447.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:07.747Z,1528900447.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:08.120Z,1528900448.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:08.144Z,1528900448.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:08.502Z,1528900448.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:08.520Z,1528900448.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:08.899Z,1528900448.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:08.930Z,1528900448.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:09.303Z,1528900449.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:09.321Z,1528900449.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:09.702Z,1528900449.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:09.720Z,1528900449.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:10.113Z,1528900450.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:10.147Z,1528900450.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:10.513Z,1528900450.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:10.531Z,1528900450.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:10.913Z,1528900450.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:10.931Z,1528900450.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:11.304Z,1528900451.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:11.322Z,1528900451.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:11.705Z,1528900451.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:11.722Z,1528900451.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:12.103Z,1528900452.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:12.128Z,1528900452.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:12.504Z,1528900452.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:12.523Z,1528900452.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:12.905Z,1528900452.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:12.922Z,1528900452.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:13.313Z,1528900453.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:13.332Z,1528900453.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:13.713Z,1528900453.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:13.731Z,1528900453.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:14.113Z,1528900454.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:14.131Z,1528900454.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:14.504Z,1528900454.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:14.522Z,1528900454.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:14.903Z,1528900454.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:14.920Z,1528900454.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:15.306Z,1528900455.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:15.324Z,1528900455.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:15.703Z,1528900455.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:15.728Z,1528900455.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:16.109Z,1528900456.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:16.128Z,1528900456.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:16.513Z,1528900456.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:16.531Z,1528900456.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:16.913Z,1528900456.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:16.931Z,1528900456.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:17.305Z,1528900457.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:17.323Z,1528900457.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:17.706Z,1528900457.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:17.724Z,1528900457.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:18.105Z,1528900458.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:18.123Z,1528900458.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:18.504Z,1528900458.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:18.534Z,1528900458.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:18.907Z,1528900458.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:18.925Z,1528900458.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:19.315Z,1528900459.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:19.340Z,1528900459.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:19.717Z,1528900459.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:19.740Z,1528900459.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:20.116Z,1528900460.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:20.140Z,1528900460.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:20.502Z,1528900460.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:20.524Z,1528900460.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:20.903Z,1528900460.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:20.933Z,1528900460.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:21.308Z,1528900461.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:21.325Z,1528900461.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:21.695Z,1528900461.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:21.736Z,1528900461.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:22.114Z,1528900462.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:22.140Z,1528900462.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:22.521Z,1528900462.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:22.544Z,1528900462.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:22.910Z,1528900462.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:22.942Z,1528900462.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:23.299Z,1528900463.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:23.335Z,1528900463.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:23.699Z,1528900463.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:23.739Z,1528900463.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:24.095Z,1528900464.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:24.136Z,1528900464.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:24.500Z,1528900464.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:24.534Z,1528900464.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:24.899Z,1528900464.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:24.933Z,1528900464.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:25.305Z,1528900465.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:25.334Z,1528900465.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:25.720Z,1528900465.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:25.738Z,1528900465.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:26.109Z,1528900466.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:26.148Z,1528900466.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:26.495Z,1528900466.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:26.533Z,1528900466.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:26.899Z,1528900466.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:26.929Z,1528900466.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:27.300Z,1528900467.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:27.318Z,1528900467.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:27.696Z,1528900467.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:27.714Z,1528900467.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:28.113Z,1528900468.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:28.146Z,1528900468.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:28.513Z,1528900468.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:28.547Z,1528900468.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:28.910Z,1528900468.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:28.944Z,1528900468.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:29.302Z,1528900469.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:29.324Z,1528900469.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:29.701Z,1528900469.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:29.719Z,1528900469.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:30.109Z,1528900470.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:30.150Z,1528900470.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:30.513Z,1528900470.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:30.551Z,1528900470.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:30.918Z,1528900470.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:30.999Z,1528900470.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:31.302Z,1528900471.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:31.320Z,1528900471.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:31.703Z,1528900471.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:31.728Z,1528900471.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:32.102Z,1528900472.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:32.120Z,1528900472.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:32.502Z,1528900472.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:32.520Z,1528900472.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:32.904Z,1528900472.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:32.922Z,1528900472.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:33.313Z,1528900473.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:33.331Z,1528900473.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:33.714Z,1528900473.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:33.732Z,1528900473.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:34.109Z,1528900474.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:34.127Z,1528900474.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:34.505Z,1528900474.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:34.523Z,1528900474.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:34.904Z,1528900474.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:34.922Z,1528900474.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:35.300Z,1528900475.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:35.324Z,1528900475.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:35.704Z,1528900475.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:35.738Z,1528900475.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:36.111Z,1528900476.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:36.129Z,1528900476.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:36.513Z,1528900476.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:36.531Z,1528900476.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:36.911Z,1528900476.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:36.936Z,1528900476.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:37.306Z,1528900477.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:37.324Z,1528900477.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:37.703Z,1528900477.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:37.747Z,1528900477.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:38.114Z,1528900478.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:38.132Z,1528900478.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:38.510Z,1528900478.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:38.528Z,1528900478.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:38.910Z,1528900478.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:38.928Z,1528900478.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:39.298Z,1528900479.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:39.324Z,1528900479.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:39.705Z,1528900479.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:39.722Z,1528900479.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:40.114Z,1528900480.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:40.133Z,1528900480.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:40.516Z,1528900480.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:40.535Z,1528900480.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:40.911Z,1528900480.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:40.929Z,1528900480.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:41.310Z,1528900481.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:41.328Z,1528900481.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:41.710Z,1528900481.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:41.728Z,1528900481.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:44.829Z,1528900484.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:44.868Z,1528900484.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:45.014Z,1528900485.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:45.052Z,1528900485.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:45.414Z,1528900485.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:45.439Z,1528900485.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:45.787Z,1528900485.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:45.822Z,1528900485.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:46.187Z,1528900486.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:46.231Z,1528900486.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:46.591Z,1528900486.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:46.634Z,1528900486.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:46.987Z,1528900486.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:47.022Z,1528900487.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:47.398Z,1528900487.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:47.433Z,1528900487.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:47.806Z,1528900487.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:47.842Z,1528900487.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:48.202Z,1528900488.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:48.236Z,1528900488.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:48.592Z,1528900488.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:48.610Z,1528900488.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:48.990Z,1528900488.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:49.009Z,1528900489.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:49.388Z,1528900489.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:49.425Z,1528900489.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:49.792Z,1528900489.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:49.810Z,1528900489.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:50.202Z,1528900490.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:50.220Z,1528900490.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:50.603Z,1528900490.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:50.620Z,1528900490.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:50.998Z,1528900490.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:51.024Z,1528900491.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:51.394Z,1528900491.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:51.413Z,1528900491.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:51.783Z,1528900491.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:51.819Z,1528900491.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:52.187Z,1528900492.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:52.223Z,1528900492.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:52.588Z,1528900492.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:52.618Z,1528900492.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:52.983Z,1528900492.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:53.019Z,1528900493.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:53.408Z,1528900493.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:53.426Z,1528900493.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:53.809Z,1528900493.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:53.832Z,1528900493.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:54.205Z,1528900494.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:54.223Z,1528900494.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:54.587Z,1528900494.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:54.615Z,1528900494.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:54.987Z,1528900494.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:55.017Z,1528900495.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:55.383Z,1528900495.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:55.415Z,1528900495.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:55.787Z,1528900495.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:55.814Z,1528900495.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:56.210Z,1528900496.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:56.228Z,1528900496.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:56.608Z,1528900496.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:56.626Z,1528900496.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:57.004Z,1528900497.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:57.022Z,1528900497.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:57.387Z,1528900497.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:57.418Z,1528900497.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:57.787Z,1528900497.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:57.815Z,1528900497.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:58.191Z,1528900498.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:58.219Z,1528900498.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:58.588Z,1528900498.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:58.618Z,1528900498.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:58.983Z,1528900498.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:59.020Z,1528900499.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:59.404Z,1528900499.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:59.422Z,1528900499.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:34:59.809Z,1528900499.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:34:59.827Z,1528900499.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:00.198Z,1528900500.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:00.223Z,1528900500.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:00.583Z,1528900500.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:00.620Z,1528900500.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:00.987Z,1528900500.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:01.017Z,1528900501.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:01.389Z,1528900501.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:01.417Z,1528900501.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:01.787Z,1528900501.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:01.820Z,1528900501.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:02.211Z,1528900502.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:02.253Z,1528900502.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:02.605Z,1528900502.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:02.623Z,1528900502.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:02.993Z,1528900502.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:03.032Z,1528900503.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:03.387Z,1528900503.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:03.418Z,1528900503.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:03.787Z,1528900503.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:03.821Z,1528900503.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:04.187Z,1528900504.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:04.205Z,1528900504.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:04.591Z,1528900504.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:04.632Z,1528900504.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:04.992Z,1528900504.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:05.010Z,1528900505.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:05.401Z,1528900505.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:05.435Z,1528900505.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:05.806Z,1528900505.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:05.840Z,1528900505.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:06.198Z,1528900506.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:06.216Z,1528900506.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:06.592Z,1528900506.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:06.611Z,1528900506.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:06.995Z,1528900506.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:07.020Z,1528900507.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:07.395Z,1528900507.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:07.420Z,1528900507.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:07.796Z,1528900507.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:07.815Z,1528900507.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:08.204Z,1528900508.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:08.226Z,1528900508.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:08.604Z,1528900508.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:08.622Z,1528900508.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:09.004Z,1528900509.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:09.022Z,1528900509.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:09.394Z,1528900509.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:09.425Z,1528900509.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:09.788Z,1528900509.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:09.820Z,1528900509.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:10.187Z,1528900510.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:10.224Z,1528900510.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:10.588Z,1528900510.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:10.618Z,1528900510.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:10.987Z,1528900510.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:11.017Z,1528900511.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:11.404Z,1528900511.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:11.429Z,1528900511.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:11.810Z,1528900511.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:11.828Z,1528900511.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:12.200Z,1528900512.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:12.219Z,1528900512.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:12.583Z,1528900512.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:12.621Z,1528900512.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:12.987Z,1528900512.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:13.018Z,1528900513.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:13.383Z,1528900513.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:13.420Z,1528900513.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:13.787Z,1528900513.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:13.816Z,1528900513.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:14.202Z,1528900514.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:14.221Z,1528900514.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:14.598Z,1528900514.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:14.616Z,1528900514.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:14.998Z,1528900514.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:15.016Z,1528900515.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:15.394Z,1528900515.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:15.412Z,1528900515.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:15.787Z,1528900515.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:15.811Z,1528900515.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:16.192Z,1528900516.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:16.216Z,1528900516.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:16.592Z,1528900516.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:16.639Z,1528900516.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:16.987Z,1528900516.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:17.011Z,1528900517.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:17.398Z,1528900517.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:17.416Z,1528900517.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:17.802Z,1528900517.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:17.820Z,1528900517.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:18.198Z,1528900518.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:18.216Z,1528900518.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:18.592Z,1528900518.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:18.624Z,1528900518.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:18.994Z,1528900518.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:19.012Z,1528900519.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:19.395Z,1528900519.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:19.413Z,1528900519.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:19.793Z,1528900519.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:19.816Z,1528900519.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:20.207Z,1528900520.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:20.233Z,1528900520.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:20.609Z,1528900520.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:20.627Z,1528900520.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:21.004Z,1528900521.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:21.022Z,1528900521.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:21.399Z,1528900521.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:21.418Z,1528900521.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:21.783Z,1528900521.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:21.812Z,1528900521.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:22.187Z,1528900522.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:22.225Z,1528900522.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:22.588Z,1528900522.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:22.619Z,1528900522.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:22.987Z,1528900522.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:23.006Z,1528900523.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:23.402Z,1528900523.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:23.436Z,1528900523.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:23.803Z,1528900523.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:23.842Z,1528900523.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:24.203Z,1528900524.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:24.236Z,1528900524.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:24.591Z,1528900524.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:24.610Z,1528900524.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:24.990Z,1528900524.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:25.009Z,1528900525.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:25.390Z,1528900525.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:25.410Z,1528900525.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:25.790Z,1528900525.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:25.808Z,1528900525.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:26.202Z,1528900526.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:26.236Z,1528900526.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:26.600Z,1528900526.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:26.619Z,1528900526.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:26.998Z,1528900526.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:27.016Z,1528900527.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:27.392Z,1528900527.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:27.415Z,1528900527.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:27.793Z,1528900527.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:27.816Z,1528900527.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:28.202Z,1528900528.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:28.220Z,1528900528.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:28.602Z,1528900528.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:28.620Z,1528900528.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:28.998Z,1528900528.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:29.016Z,1528900529.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:29.391Z,1528900529.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:29.422Z,1528900529.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:29.787Z,1528900529.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:29.817Z,1528900529.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:30.206Z,1528900530.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:30.228Z,1528900530.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:30.608Z,1528900530.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:30.625Z,1528900530.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:31.009Z,1528900531.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:31.027Z,1528900531.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:31.384Z,1528900531.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:31.414Z,1528900531.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:31.787Z,1528900531.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:31.815Z,1528900531.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:32.211Z,1528900532.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:32.229Z,1528900532.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:32.608Z,1528900532.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:32.632Z,1528900532.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:33.005Z,1528900533.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:33.023Z,1528900533.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:33.388Z,1528900533.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:33.418Z,1528900533.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:33.787Z,1528900533.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:33.815Z,1528900533.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:34.204Z,1528900534.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:34.223Z,1528900534.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:34.609Z,1528900534.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:34.627Z,1528900534.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:35.005Z,1528900535.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:35.023Z,1528900535.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:35.388Z,1528900535.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:35.420Z,1528900535.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:35.787Z,1528900535.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:35.817Z,1528900535.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:36.204Z,1528900536.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:36.222Z,1528900536.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:36.608Z,1528900536.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:36.626Z,1528900536.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:37.010Z,1528900537.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:37.028Z,1528900537.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:37.388Z,1528900537.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:37.416Z,1528900537.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:37.787Z,1528900537.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:37.823Z,1528900537.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:38.210Z,1528900538.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:38.228Z,1528900538.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:38.608Z,1528900538.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:38.626Z,1528900538.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:39.004Z,1528900539.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:39.028Z,1528900539.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:39.388Z,1528900539.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:39.418Z,1528900539.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:39.788Z,1528900539.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:39.816Z,1528900539.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:40.206Z,1528900540.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:40.223Z,1528900540.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:40.609Z,1528900540.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:40.632Z,1528900540.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:40.998Z,1528900540.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:41.022Z,1528900541.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:41.392Z,1528900541.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:41.420Z,1528900541.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:41.423Z,1528900541.423 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T14:35:41.423Z,1528900541.423 [Default:CheckIn:C.Wait] Stopped
2018-06-13T14:35:41.423Z,1528900541.423 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T14:35:41.423Z,1528900541.423 [Default:CheckIn:D] Running Loop=1
2018-06-13T14:35:41.792Z,1528900541.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:41.822Z,1528900541.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:41.825Z,1528900541.825 [Default:CheckIn:D] Stopped
2018-06-13T14:35:41.825Z,1528900541.825 [Default:CheckIn:E] Running Loop=1
2018-06-13T14:35:42.209Z,1528900542.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:42.232Z,1528900542.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:42.235Z,1528900542.235 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 668.472982 min 
2018-06-13T14:35:42.236Z,1528900542.236 [Default:CheckIn:E] Stopped
2018-06-13T14:35:42.236Z,1528900542.236 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T14:35:42.236Z,1528900542.236 [Default:CheckIn] Stopped
2018-06-13T14:35:42.236Z,1528900542.236 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T14:35:42.236Z,1528900542.236 [Default:CheckIn](INFO): Running loop #65
2018-06-13T14:35:42.236Z,1528900542.236 [Default:CheckIn] Running Loop=65
2018-06-13T14:35:42.236Z,1528900542.236 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T14:35:42.236Z,1528900542.236 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T14:35:42.612Z,1528900542.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:42.630Z,1528900542.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:43.009Z,1528900543.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:43.027Z,1528900543.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:43.387Z,1528900543.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:43.424Z,1528900543.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:43.787Z,1528900543.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:43.825Z,1528900543.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:44.214Z,1528900544.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:44.236Z,1528900544.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:44.606Z,1528900544.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:44.638Z,1528900544.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:45.009Z,1528900545.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:45.027Z,1528900545.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:45.388Z,1528900545.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:45.430Z,1528900545.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:48.504Z,1528900548.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:48.523Z,1528900548.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:48.660Z,1528900548.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:48.696Z,1528900548.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:49.060Z,1528900549.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:49.078Z,1528900549.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:49.455Z,1528900549.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:49.473Z,1528900549.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:49.835Z,1528900549.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:49.872Z,1528900549.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:50.235Z,1528900550.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:50.269Z,1528900550.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:50.637Z,1528900550.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:50.665Z,1528900550.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:51.035Z,1528900551.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:51.072Z,1528900551.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:51.460Z,1528900551.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:51.479Z,1528900551.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:51.850Z,1528900551.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:51.873Z,1528900551.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:52.253Z,1528900552.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:52.271Z,1528900552.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:52.636Z,1528900552.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:52.675Z,1528900552.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:53.031Z,1528900553.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:53.072Z,1528900553.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:53.436Z,1528900553.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:53.466Z,1528900553.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:53.835Z,1528900553.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:53.869Z,1528900553.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:54.250Z,1528900554.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:54.274Z,1528900554.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:54.657Z,1528900554.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:54.676Z,1528900554.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:55.057Z,1528900555.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:55.075Z,1528900555.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:55.431Z,1528900555.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:55.466Z,1528900555.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:55.835Z,1528900555.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:55.878Z,1528900555.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:56.235Z,1528900556.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:56.277Z,1528900556.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:56.632Z,1528900556.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:56.649Z,1528900556.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:57.035Z,1528900557.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:57.080Z,1528900557.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:57.454Z,1528900557.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:57.484Z,1528900557.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:57.853Z,1528900557.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:57.881Z,1528900557.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:58.250Z,1528900558.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:58.283Z,1528900558.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:58.639Z,1528900558.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:58.656Z,1528900558.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:59.038Z,1528900559.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:59.056Z,1528900559.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:59.439Z,1528900559.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:59.461Z,1528900559.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:35:59.838Z,1528900559.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:35:59.855Z,1528900559.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:00.250Z,1528900560.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:00.284Z,1528900560.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:00.650Z,1528900560.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:00.695Z,1528900560.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:01.045Z,1528900561.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:01.068Z,1528900561.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:01.442Z,1528900561.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:01.460Z,1528900561.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:01.840Z,1528900561.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:01.858Z,1528900561.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:02.246Z,1528900562.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:02.268Z,1528900562.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:02.650Z,1528900562.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:02.668Z,1528900562.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:03.046Z,1528900563.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:03.063Z,1528900563.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:03.439Z,1528900563.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:03.456Z,1528900563.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:03.834Z,1528900563.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:03.864Z,1528900563.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:04.247Z,1528900564.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:04.272Z,1528900564.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:04.649Z,1528900564.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:04.666Z,1528900564.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:05.048Z,1528900565.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:05.066Z,1528900565.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:05.443Z,1528900565.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:05.461Z,1528900565.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:05.839Z,1528900565.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:05.856Z,1528900565.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:06.247Z,1528900566.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:06.266Z,1528900566.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:06.650Z,1528900566.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:06.672Z,1528900566.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:07.052Z,1528900567.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:07.076Z,1528900567.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:07.443Z,1528900567.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:07.461Z,1528900567.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:07.839Z,1528900567.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:07.876Z,1528900567.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:08.252Z,1528900568.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:08.270Z,1528900568.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:08.651Z,1528900568.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:08.670Z,1528900568.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:09.051Z,1528900569.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:09.069Z,1528900569.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:09.443Z,1528900569.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:09.460Z,1528900569.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:09.842Z,1528900569.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:09.859Z,1528900569.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:10.251Z,1528900570.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:10.268Z,1528900570.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:10.651Z,1528900570.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:10.668Z,1528900570.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:11.051Z,1528900571.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:11.070Z,1528900571.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:11.439Z,1528900571.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:11.465Z,1528900571.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:11.843Z,1528900571.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:11.861Z,1528900571.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:12.254Z,1528900572.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:12.280Z,1528900572.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:12.653Z,1528900572.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:12.672Z,1528900572.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:13.052Z,1528900573.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:13.070Z,1528900573.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:13.442Z,1528900573.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:13.460Z,1528900573.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:13.838Z,1528900573.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:13.868Z,1528900573.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:14.256Z,1528900574.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:14.274Z,1528900574.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:14.656Z,1528900574.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:14.674Z,1528900574.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:15.052Z,1528900575.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:15.069Z,1528900575.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:15.431Z,1528900575.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:15.460Z,1528900575.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:15.835Z,1528900575.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:15.871Z,1528900575.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:16.218Z,1528900576.218 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T14:36:16.219Z,1528900576.219 [NAL9602] Data Fault, FailCount= 1
2018-06-13T14:36:16.219Z,1528900576.219 [NAL9602](ERROR): Data Fault
2018-06-13T14:36:16.235Z,1528900576.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:16.274Z,1528900576.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:16.353Z,1528900576.353 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T14:36:16.618Z,1528900576.618 [NAL9602](INFO): Powering down
2018-06-13T14:36:16.635Z,1528900576.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:16.669Z,1528900576.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:17.035Z,1528900577.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:17.068Z,1528900577.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:17.434Z,1528900577.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:17.464Z,1528900577.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:17.537Z,1528900577.537 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T14:36:17.537Z,1528900577.537 [NAL9602] No Fault, FailCount= 1
2018-06-13T14:36:17.830Z,1528900577.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:17.867Z,1528900577.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:18.235Z,1528900578.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:18.263Z,1528900578.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:18.635Z,1528900578.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:18.663Z,1528900578.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:19.034Z,1528900579.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:19.062Z,1528900579.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:19.435Z,1528900579.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:19.462Z,1528900579.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:19.834Z,1528900579.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:19.862Z,1528900579.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:20.234Z,1528900580.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:20.262Z,1528900580.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:20.634Z,1528900580.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:20.662Z,1528900580.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:21.033Z,1528900581.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:21.061Z,1528900581.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:21.434Z,1528900581.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:21.463Z,1528900581.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:21.835Z,1528900581.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:21.862Z,1528900581.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:22.234Z,1528900582.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:22.262Z,1528900582.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:22.634Z,1528900582.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:22.662Z,1528900582.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:23.035Z,1528900583.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:23.062Z,1528900583.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:23.435Z,1528900583.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:23.464Z,1528900583.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:23.834Z,1528900583.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:23.863Z,1528900583.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:24.235Z,1528900584.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:24.262Z,1528900584.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:24.633Z,1528900584.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:24.661Z,1528900584.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:25.030Z,1528900585.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:25.064Z,1528900585.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:25.435Z,1528900585.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:25.464Z,1528900585.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:25.834Z,1528900585.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:25.862Z,1528900585.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:26.234Z,1528900586.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:26.262Z,1528900586.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:26.635Z,1528900586.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:26.662Z,1528900586.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:27.034Z,1528900587.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:27.063Z,1528900587.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:27.434Z,1528900587.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:27.462Z,1528900587.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:27.834Z,1528900587.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:27.861Z,1528900587.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:28.235Z,1528900588.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:28.264Z,1528900588.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:28.634Z,1528900588.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:28.663Z,1528900588.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:29.035Z,1528900589.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:29.070Z,1528900589.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:29.435Z,1528900589.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:29.463Z,1528900589.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:29.834Z,1528900589.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:29.863Z,1528900589.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:30.235Z,1528900590.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:30.264Z,1528900590.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:30.638Z,1528900590.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:30.666Z,1528900590.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:31.035Z,1528900591.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:31.065Z,1528900591.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:31.435Z,1528900591.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:31.472Z,1528900591.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:31.835Z,1528900591.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:31.863Z,1528900591.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:32.235Z,1528900592.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:32.265Z,1528900592.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:32.630Z,1528900592.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:32.668Z,1528900592.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:33.035Z,1528900593.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:33.066Z,1528900593.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:33.434Z,1528900593.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:33.469Z,1528900593.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:33.830Z,1528900593.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:33.856Z,1528900593.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:34.265Z,1528900594.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:34.284Z,1528900594.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:34.634Z,1528900594.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:34.676Z,1528900594.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:35.030Z,1528900595.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:35.049Z,1528900595.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:35.434Z,1528900595.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:35.452Z,1528900595.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:35.838Z,1528900595.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:35.856Z,1528900595.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:36.238Z,1528900596.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:36.256Z,1528900596.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:36.634Z,1528900596.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:36.652Z,1528900596.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:37.038Z,1528900597.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:37.056Z,1528900597.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:37.438Z,1528900597.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:37.456Z,1528900597.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:37.838Z,1528900597.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:37.860Z,1528900597.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:38.238Z,1528900598.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:38.256Z,1528900598.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:38.633Z,1528900598.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:38.651Z,1528900598.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:39.038Z,1528900599.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:39.056Z,1528900599.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:39.437Z,1528900599.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:39.455Z,1528900599.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:39.835Z,1528900599.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:39.853Z,1528900599.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:40.240Z,1528900600.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:40.258Z,1528900600.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:40.638Z,1528900600.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:40.656Z,1528900600.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:41.034Z,1528900601.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:41.052Z,1528900601.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:41.438Z,1528900601.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:41.460Z,1528900601.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:41.838Z,1528900601.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:41.856Z,1528900601.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:44.950Z,1528900604.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:44.984Z,1528900604.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:45.106Z,1528900605.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:45.138Z,1528900605.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:45.502Z,1528900605.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:45.542Z,1528900605.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:45.903Z,1528900605.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:45.929Z,1528900605.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:46.298Z,1528900606.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:46.316Z,1528900606.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:46.686Z,1528900606.686 [NAL9602](INFO): Powering up NAL9602
2018-06-13T14:36:46.703Z,1528900606.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:46.747Z,1528900606.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:47.098Z,1528900607.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:47.116Z,1528900607.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:47.502Z,1528900607.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:47.520Z,1528900607.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:47.898Z,1528900607.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:47.924Z,1528900607.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:48.302Z,1528900608.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:48.320Z,1528900608.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:48.702Z,1528900608.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:48.720Z,1528900608.720 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:48.720Z,1528900608.720 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 223
2018-06-13T14:36:48.720Z,1528900608.720 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:36:48.722Z,1528900608.722 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:48.722Z,1528900608.722 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 223
2018-06-13T14:36:48.722Z,1528900608.722 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:36:48.724Z,1528900608.724 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:48.724Z,1528900608.724 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 223
2018-06-13T14:36:48.724Z,1528900608.724 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:36:48.813Z,1528900608.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:36:48.813Z,1528900608.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:36:48.814Z,1528900608.814 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:36:49.103Z,1528900609.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:49.235Z,1528900609.235 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:36:49.235Z,1528900609.235 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 223
2018-06-13T14:36:49.236Z,1528900609.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:36:49.236Z,1528900609.236 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 223
2018-06-13T14:36:49.236Z,1528900609.236 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:36:49.236Z,1528900609.236 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 223
2018-06-13T14:36:49.508Z,1528900609.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:49.525Z,1528900609.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:36:49.526Z,1528900609.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:36:49.526Z,1528900609.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:36:49.526Z,1528900609.526 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:36:49.527Z,1528900609.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:36:49.527Z,1528900609.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:36:49.527Z,1528900609.527 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:36:49.528Z,1528900609.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:36:49.528Z,1528900609.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:36:49.905Z,1528900609.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:49.939Z,1528900609.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:36:49.940Z,1528900609.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:50.309Z,1528900610.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:50.331Z,1528900610.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:36:50.332Z,1528900610.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:50.699Z,1528900610.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:50.729Z,1528900610.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:36:50.730Z,1528900610.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:51.103Z,1528900611.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:51.141Z,1528900611.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:36:51.142Z,1528900611.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:51.498Z,1528900611.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:51.531Z,1528900611.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:36:51.532Z,1528900611.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:51.899Z,1528900611.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:51.935Z,1528900611.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:36:51.936Z,1528900611.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:52.303Z,1528900612.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:52.330Z,1528900612.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:36:52.331Z,1528900612.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:52.704Z,1528900612.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:52.739Z,1528900612.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:36:52.740Z,1528900612.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:53.098Z,1528900613.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:53.150Z,1528900613.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:36:53.151Z,1528900613.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:53.502Z,1528900613.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:53.530Z,1528900613.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:36:53.531Z,1528900613.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:53.902Z,1528900613.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:53.930Z,1528900613.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:36:53.931Z,1528900613.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:54.302Z,1528900614.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:54.338Z,1528900614.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:36:54.339Z,1528900614.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:54.702Z,1528900614.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:54.736Z,1528900614.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:36:54.738Z,1528900614.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:55.102Z,1528900615.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:55.140Z,1528900615.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:36:55.141Z,1528900615.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:55.503Z,1528900615.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:55.541Z,1528900615.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:36:55.542Z,1528900615.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:55.902Z,1528900615.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:55.936Z,1528900615.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:36:55.941Z,1528900615.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:56.302Z,1528900616.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:56.319Z,1528900616.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:36:56.320Z,1528900616.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:56.698Z,1528900616.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:56.716Z,1528900616.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:36:56.717Z,1528900616.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:57.103Z,1528900617.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:57.137Z,1528900617.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:36:57.138Z,1528900617.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:57.518Z,1528900617.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:57.557Z,1528900617.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:36:57.558Z,1528900617.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:57.885Z,1528900617.885 [NAL9602](INFO): NAL9602 initialized
2018-06-13T14:36:57.902Z,1528900617.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:57.919Z,1528900617.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:36:57.920Z,1528900617.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:58.306Z,1528900618.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:58.323Z,1528900618.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:36:58.324Z,1528900618.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:58.717Z,1528900618.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:58.758Z,1528900618.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:36:58.759Z,1528900618.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:59.117Z,1528900619.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:59.135Z,1528900619.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:36:59.135Z,1528900619.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:59.514Z,1528900619.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:59.532Z,1528900619.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:36:59.532Z,1528900619.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:36:59.909Z,1528900619.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:36:59.926Z,1528900619.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:36:59.927Z,1528900619.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:00.309Z,1528900620.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:00.326Z,1528900620.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:37:00.327Z,1528900620.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:00.709Z,1528900620.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:00.726Z,1528900620.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:37:00.727Z,1528900620.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:01.109Z,1528900621.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:01.127Z,1528900621.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:37:01.128Z,1528900621.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:01.514Z,1528900621.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:01.531Z,1528900621.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:37:01.532Z,1528900621.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:01.917Z,1528900621.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:01.934Z,1528900621.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:37:01.935Z,1528900621.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:02.318Z,1528900622.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:02.336Z,1528900622.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:37:02.337Z,1528900622.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:02.709Z,1528900622.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:02.726Z,1528900622.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:37:02.727Z,1528900622.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:03.107Z,1528900623.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:03.151Z,1528900623.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:37:03.151Z,1528900623.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:03.510Z,1528900623.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:03.527Z,1528900623.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:37:03.528Z,1528900623.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:03.910Z,1528900623.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:03.927Z,1528900623.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:37:03.928Z,1528900623.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:04.306Z,1528900624.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:04.336Z,1528900624.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:37:04.337Z,1528900624.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:04.717Z,1528900624.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:04.735Z,1528900624.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:37:04.736Z,1528900624.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:05.117Z,1528900625.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:05.135Z,1528900625.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:37:05.136Z,1528900625.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:05.514Z,1528900625.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:05.536Z,1528900625.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:37:05.537Z,1528900625.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:05.910Z,1528900625.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:05.927Z,1528900625.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:37:05.928Z,1528900625.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:06.309Z,1528900626.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:06.326Z,1528900626.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:37:06.327Z,1528900626.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:06.707Z,1528900626.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:06.738Z,1528900626.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:37:06.739Z,1528900626.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:07.107Z,1528900627.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:07.144Z,1528900627.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:37:07.149Z,1528900627.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:07.515Z,1528900627.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:07.533Z,1528900627.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:37:07.534Z,1528900627.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:07.918Z,1528900627.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:07.940Z,1528900627.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:37:07.941Z,1528900627.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:08.321Z,1528900628.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:08.339Z,1528900628.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:37:08.340Z,1528900628.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:08.709Z,1528900628.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:08.726Z,1528900628.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:09.107Z,1528900629.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:09.143Z,1528900629.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:09.510Z,1528900629.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:09.528Z,1528900629.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:09.910Z,1528900629.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:09.928Z,1528900629.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:10.308Z,1528900630.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:10.326Z,1528900630.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:10.717Z,1528900630.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:10.740Z,1528900630.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:11.122Z,1528900631.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:11.148Z,1528900631.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:11.519Z,1528900631.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:11.537Z,1528900631.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:11.911Z,1528900631.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:11.929Z,1528900631.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:12.309Z,1528900632.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:12.327Z,1528900632.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:12.707Z,1528900632.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:12.740Z,1528900632.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:13.103Z,1528900633.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:13.144Z,1528900633.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:13.521Z,1528900633.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:13.544Z,1528900633.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:13.925Z,1528900633.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:13.942Z,1528900633.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:14.324Z,1528900634.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:14.342Z,1528900634.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:14.703Z,1528900634.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:14.744Z,1528900634.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:15.113Z,1528900635.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:15.134Z,1528900635.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:15.504Z,1528900635.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:15.537Z,1528900635.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:15.904Z,1528900635.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:15.931Z,1528900635.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:16.303Z,1528900636.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:16.339Z,1528900636.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:16.728Z,1528900636.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:16.752Z,1528900636.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:17.118Z,1528900637.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:17.148Z,1528900637.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:17.520Z,1528900637.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:17.538Z,1528900637.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:17.903Z,1528900637.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:17.949Z,1528900637.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:18.303Z,1528900638.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:18.344Z,1528900638.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:18.704Z,1528900638.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:18.738Z,1528900638.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:19.103Z,1528900639.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:19.137Z,1528900639.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:19.509Z,1528900639.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:19.543Z,1528900639.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:19.921Z,1528900639.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:19.949Z,1528900639.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:20.321Z,1528900640.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:20.351Z,1528900640.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:20.707Z,1528900640.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:20.725Z,1528900640.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:21.106Z,1528900641.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:21.124Z,1528900641.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:21.506Z,1528900641.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:21.532Z,1528900641.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:21.906Z,1528900641.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:21.923Z,1528900641.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:22.308Z,1528900642.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:22.332Z,1528900642.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:22.718Z,1528900642.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:22.736Z,1528900642.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:23.117Z,1528900643.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:23.135Z,1528900643.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:23.514Z,1528900643.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:23.531Z,1528900643.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:23.909Z,1528900643.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:23.927Z,1528900643.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:24.308Z,1528900644.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:24.326Z,1528900644.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:24.710Z,1528900644.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:24.734Z,1528900644.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:25.109Z,1528900645.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:25.127Z,1528900645.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:25.514Z,1528900645.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:25.532Z,1528900645.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:25.917Z,1528900645.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:25.935Z,1528900645.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:26.317Z,1528900646.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:26.335Z,1528900646.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:26.703Z,1528900646.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:26.734Z,1528900646.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:27.108Z,1528900647.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:27.126Z,1528900647.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:27.510Z,1528900647.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:27.528Z,1528900647.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:27.909Z,1528900647.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:27.926Z,1528900647.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:28.308Z,1528900648.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:28.336Z,1528900648.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:28.717Z,1528900648.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:28.735Z,1528900648.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:29.114Z,1528900649.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:29.136Z,1528900649.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:29.514Z,1528900649.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:29.536Z,1528900649.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:29.907Z,1528900649.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:29.940Z,1528900649.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:30.311Z,1528900650.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:30.328Z,1528900650.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:30.710Z,1528900650.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:30.728Z,1528900650.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:31.107Z,1528900651.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:31.144Z,1528900651.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:31.520Z,1528900651.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:31.538Z,1528900651.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:31.923Z,1528900651.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:31.941Z,1528900651.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:32.323Z,1528900652.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:32.361Z,1528900652.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:32.699Z,1528900652.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:32.727Z,1528900652.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:33.114Z,1528900653.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:33.131Z,1528900653.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:33.503Z,1528900653.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:33.540Z,1528900653.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:33.904Z,1528900653.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:33.931Z,1528900653.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:34.303Z,1528900654.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:34.332Z,1528900654.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:34.724Z,1528900654.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:34.748Z,1528900654.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:35.124Z,1528900655.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:35.148Z,1528900655.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:35.519Z,1528900655.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:35.538Z,1528900655.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:35.899Z,1528900655.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:35.937Z,1528900655.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:36.299Z,1528900656.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:36.332Z,1528900656.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:36.703Z,1528900656.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:36.741Z,1528900656.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:37.103Z,1528900657.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:37.134Z,1528900657.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:37.513Z,1528900657.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:37.547Z,1528900657.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:37.917Z,1528900657.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:37.951Z,1528900657.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:38.317Z,1528900658.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:38.346Z,1528900658.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:38.703Z,1528900658.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:38.744Z,1528900658.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:39.107Z,1528900659.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:39.124Z,1528900659.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:39.506Z,1528900659.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:39.524Z,1528900659.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:39.907Z,1528900659.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:39.925Z,1528900659.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:40.306Z,1528900660.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:40.324Z,1528900660.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:40.717Z,1528900660.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:40.751Z,1528900660.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:41.117Z,1528900661.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:41.135Z,1528900661.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:41.522Z,1528900661.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:41.557Z,1528900661.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:41.911Z,1528900661.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:41.929Z,1528900661.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:42.308Z,1528900662.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:42.326Z,1528900662.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:42.710Z,1528900662.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:42.732Z,1528900662.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:43.108Z,1528900663.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:43.127Z,1528900663.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:43.514Z,1528900663.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:43.531Z,1528900663.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:43.921Z,1528900663.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:43.960Z,1528900663.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:44.317Z,1528900664.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:44.335Z,1528900664.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:44.712Z,1528900664.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:44.730Z,1528900664.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:47.825Z,1528900667.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:47.843Z,1528900667.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:47.987Z,1528900667.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:48.020Z,1528900668.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:48.404Z,1528900668.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:48.421Z,1528900668.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:48.808Z,1528900668.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:48.832Z,1528900668.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:49.193Z,1528900669.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:49.229Z,1528900669.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:49.587Z,1528900669.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:49.625Z,1528900669.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:49.984Z,1528900669.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:50.026Z,1528900670.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:50.383Z,1528900670.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:50.401Z,1528900670.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:50.793Z,1528900670.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:50.827Z,1528900670.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:51.197Z,1528900671.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:51.225Z,1528900671.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:51.594Z,1528900671.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:51.627Z,1528900671.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:51.983Z,1528900671.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:52.001Z,1528900672.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:52.386Z,1528900672.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:52.403Z,1528900672.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:52.787Z,1528900672.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:52.804Z,1528900672.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:53.187Z,1528900673.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:53.221Z,1528900673.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:53.597Z,1528900673.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:53.637Z,1528900673.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:53.997Z,1528900673.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:54.032Z,1528900674.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:54.397Z,1528900674.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:54.415Z,1528900674.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:54.787Z,1528900674.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:54.804Z,1528900674.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:55.186Z,1528900675.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:55.204Z,1528900675.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:55.582Z,1528900675.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:55.608Z,1528900675.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:55.988Z,1528900675.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:56.018Z,1528900676.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:56.383Z,1528900676.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:56.420Z,1528900676.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:56.801Z,1528900676.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:56.819Z,1528900676.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:57.204Z,1528900677.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:57.228Z,1528900677.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:57.599Z,1528900677.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:57.617Z,1528900677.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:57.979Z,1528900677.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:58.015Z,1528900678.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:58.383Z,1528900678.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:58.412Z,1528900678.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:58.784Z,1528900678.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:58.813Z,1528900678.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:59.183Z,1528900679.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:59.216Z,1528900679.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:37:59.605Z,1528900679.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:37:59.622Z,1528900679.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:00.003Z,1528900680.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:00.021Z,1528900680.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:00.399Z,1528900680.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:00.417Z,1528900680.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:00.783Z,1528900680.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:00.814Z,1528900680.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:01.179Z,1528900681.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:01.220Z,1528900681.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:01.585Z,1528900681.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:01.615Z,1528900681.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:01.985Z,1528900681.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:02.014Z,1528900682.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:02.383Z,1528900682.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:02.415Z,1528900682.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:02.800Z,1528900682.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:02.824Z,1528900682.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:03.205Z,1528900683.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:03.228Z,1528900683.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:03.591Z,1528900683.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:03.624Z,1528900683.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:03.983Z,1528900683.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:04.013Z,1528900684.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:04.383Z,1528900684.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:04.402Z,1528900684.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:04.787Z,1528900684.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:04.821Z,1528900684.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:05.187Z,1528900685.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:05.205Z,1528900685.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:05.597Z,1528900685.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:05.637Z,1528900685.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:05.993Z,1528900685.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:06.012Z,1528900686.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:06.399Z,1528900686.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:06.432Z,1528900686.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:06.786Z,1528900686.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:06.804Z,1528900686.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:07.182Z,1528900687.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:07.212Z,1528900687.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:07.589Z,1528900687.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:07.607Z,1528900687.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:07.988Z,1528900687.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:08.026Z,1528900688.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:08.390Z,1528900688.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:08.412Z,1528900688.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:08.794Z,1528900688.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:08.816Z,1528900688.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:09.197Z,1528900689.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:09.215Z,1528900689.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:09.594Z,1528900689.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:09.612Z,1528900689.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:09.987Z,1528900689.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:10.009Z,1528900690.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:10.390Z,1528900690.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:10.408Z,1528900690.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:10.790Z,1528900690.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:10.808Z,1528900690.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:11.192Z,1528900691.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:11.210Z,1528900691.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:11.597Z,1528900691.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:11.615Z,1528900691.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:11.994Z,1528900691.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:12.016Z,1528900692.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:12.394Z,1528900692.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:12.416Z,1528900692.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:12.790Z,1528900692.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:12.808Z,1528900692.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:13.190Z,1528900693.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:13.212Z,1528900693.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:13.589Z,1528900693.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:13.607Z,1528900693.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:13.986Z,1528900693.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:14.016Z,1528900694.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:14.389Z,1528900694.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:14.412Z,1528900694.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:14.798Z,1528900694.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:14.816Z,1528900694.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:15.199Z,1528900695.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:15.218Z,1528900695.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:15.599Z,1528900695.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:15.624Z,1528900695.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:15.994Z,1528900695.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:16.011Z,1528900696.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:16.389Z,1528900696.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:16.416Z,1528900696.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:16.783Z,1528900696.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:16.807Z,1528900696.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:17.187Z,1528900697.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:17.210Z,1528900697.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:17.602Z,1528900697.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:17.620Z,1528900697.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:17.999Z,1528900697.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:18.017Z,1528900698.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:18.398Z,1528900698.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:18.420Z,1528900698.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:18.792Z,1528900698.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:18.810Z,1528900698.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:19.183Z,1528900699.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:19.207Z,1528900699.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:19.590Z,1528900699.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:19.612Z,1528900699.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:19.991Z,1528900699.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:20.010Z,1528900700.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:20.383Z,1528900700.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:20.407Z,1528900700.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:20.799Z,1528900700.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:20.817Z,1528900700.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:21.198Z,1528900701.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:21.220Z,1528900701.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:21.594Z,1528900701.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:21.612Z,1528900701.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:21.989Z,1528900701.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:22.007Z,1528900702.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:22.390Z,1528900702.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:22.408Z,1528900702.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:22.784Z,1528900702.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:22.810Z,1528900702.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:23.189Z,1528900703.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:23.206Z,1528900703.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:23.598Z,1528900703.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:23.624Z,1528900703.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:23.998Z,1528900703.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:24.015Z,1528900704.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:24.398Z,1528900704.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:24.415Z,1528900704.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:24.790Z,1528900704.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:24.814Z,1528900704.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:25.189Z,1528900705.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:25.207Z,1528900705.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:25.587Z,1528900705.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:25.610Z,1528900705.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:25.991Z,1528900705.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:26.009Z,1528900706.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:26.383Z,1528900706.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:26.406Z,1528900706.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:26.798Z,1528900706.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:26.824Z,1528900706.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:27.198Z,1528900707.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:27.216Z,1528900707.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:27.598Z,1528900707.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:27.616Z,1528900707.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:27.987Z,1528900707.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:28.024Z,1528900708.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:28.387Z,1528900708.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:28.412Z,1528900708.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:28.783Z,1528900708.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:28.807Z,1528900708.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:29.187Z,1528900709.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:29.217Z,1528900709.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:29.604Z,1528900709.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:29.628Z,1528900709.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:30.003Z,1528900710.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:30.021Z,1528900710.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:30.399Z,1528900710.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:30.417Z,1528900710.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:30.783Z,1528900710.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:30.822Z,1528900710.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:31.179Z,1528900711.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:31.215Z,1528900711.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:31.583Z,1528900711.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:31.610Z,1528900711.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:31.983Z,1528900711.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:32.011Z,1528900712.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:32.387Z,1528900712.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:32.414Z,1528900712.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:32.799Z,1528900712.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:32.817Z,1528900712.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:33.203Z,1528900713.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:33.221Z,1528900713.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:33.594Z,1528900713.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:33.616Z,1528900713.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:33.983Z,1528900713.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:34.010Z,1528900714.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:34.384Z,1528900714.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:34.414Z,1528900714.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:34.784Z,1528900714.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:34.816Z,1528900714.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:35.183Z,1528900715.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:35.216Z,1528900715.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:35.604Z,1528900715.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:35.622Z,1528900715.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:35.999Z,1528900715.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:36.017Z,1528900716.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:36.398Z,1528900716.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:36.424Z,1528900716.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:36.783Z,1528900716.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:36.818Z,1528900716.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:37.179Z,1528900717.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:37.197Z,1528900717.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:37.583Z,1528900717.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:37.623Z,1528900717.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:37.983Z,1528900717.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:38.000Z,1528900718.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:38.383Z,1528900718.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:38.401Z,1528900718.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:38.797Z,1528900718.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:38.824Z,1528900718.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:39.197Z,1528900719.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:39.228Z,1528900719.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:39.597Z,1528900719.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:39.626Z,1528900719.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:39.986Z,1528900719.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:40.004Z,1528900720.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:40.388Z,1528900720.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:40.406Z,1528900720.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:40.783Z,1528900720.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:40.801Z,1528900720.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:41.187Z,1528900721.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:41.205Z,1528900721.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:41.598Z,1528900721.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:41.632Z,1528900721.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:42.002Z,1528900722.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:42.036Z,1528900722.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:45.130Z,1528900725.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:45.148Z,1528900725.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:45.256Z,1528900725.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:45.300Z,1528900725.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:45.659Z,1528900725.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:45.696Z,1528900725.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:46.064Z,1528900726.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:46.094Z,1528900726.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:46.463Z,1528900726.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:46.491Z,1528900726.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:46.881Z,1528900726.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:46.899Z,1528900726.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:47.280Z,1528900727.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:47.304Z,1528900727.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:47.665Z,1528900727.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:47.699Z,1528900727.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:48.060Z,1528900728.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:48.097Z,1528900728.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:48.459Z,1528900728.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:48.490Z,1528900728.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:48.856Z,1528900728.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:48.874Z,1528900728.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:49.259Z,1528900729.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:49.278Z,1528900729.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:49.678Z,1528900729.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:49.707Z,1528900729.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:50.077Z,1528900730.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:50.112Z,1528900730.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:50.473Z,1528900730.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:50.508Z,1528900730.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:50.863Z,1528900730.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:50.880Z,1528900730.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:51.258Z,1528900731.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:51.276Z,1528900731.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:51.662Z,1528900731.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:51.680Z,1528900731.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:52.063Z,1528900732.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:52.081Z,1528900732.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:52.458Z,1528900732.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:52.476Z,1528900732.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:52.873Z,1528900732.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:52.907Z,1528900732.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:53.273Z,1528900733.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:53.291Z,1528900733.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:53.670Z,1528900733.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:53.688Z,1528900733.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:54.065Z,1528900734.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:54.083Z,1528900734.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:54.462Z,1528900734.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:54.484Z,1528900734.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:54.862Z,1528900734.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:54.879Z,1528900734.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:55.264Z,1528900735.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:55.282Z,1528900735.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:55.669Z,1528900735.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:55.687Z,1528900735.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:56.069Z,1528900736.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:56.088Z,1528900736.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:56.470Z,1528900736.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:56.487Z,1528900736.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:56.865Z,1528900736.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:56.888Z,1528900736.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:57.264Z,1528900737.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:57.288Z,1528900737.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:57.664Z,1528900737.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:57.682Z,1528900737.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:58.065Z,1528900738.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:58.083Z,1528900738.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:58.459Z,1528900738.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:58.481Z,1528900738.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:58.870Z,1528900738.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:58.888Z,1528900738.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:59.273Z,1528900739.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:59.291Z,1528900739.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:38:59.670Z,1528900739.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:38:59.688Z,1528900739.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:00.063Z,1528900740.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:00.080Z,1528900740.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:00.462Z,1528900740.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:00.479Z,1528900740.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:00.862Z,1528900740.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:00.880Z,1528900740.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:01.264Z,1528900741.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:01.282Z,1528900741.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:01.669Z,1528900741.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:01.688Z,1528900741.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:02.073Z,1528900742.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:02.091Z,1528900742.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:02.470Z,1528900742.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:02.487Z,1528900742.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:02.862Z,1528900742.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:02.879Z,1528900742.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:03.265Z,1528900743.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:03.283Z,1528900743.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:03.665Z,1528900743.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:03.683Z,1528900743.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:04.062Z,1528900744.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:04.084Z,1528900744.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:04.464Z,1528900744.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:04.482Z,1528900744.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:04.877Z,1528900744.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:04.920Z,1528900744.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:05.271Z,1528900745.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:05.289Z,1528900745.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:05.674Z,1528900745.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:05.692Z,1528900745.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:06.063Z,1528900746.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:06.094Z,1528900746.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:06.467Z,1528900746.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:06.485Z,1528900746.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:06.866Z,1528900746.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:06.884Z,1528900746.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:07.265Z,1528900747.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:07.283Z,1528900747.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:07.671Z,1528900747.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:07.690Z,1528900747.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:08.074Z,1528900748.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:08.092Z,1528900748.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:08.468Z,1528900748.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:08.488Z,1528900748.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:08.865Z,1528900748.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:08.883Z,1528900748.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:09.258Z,1528900749.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:09.292Z,1528900749.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:09.663Z,1528900749.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:09.686Z,1528900749.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:10.066Z,1528900750.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:10.084Z,1528900750.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:10.466Z,1528900750.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:10.488Z,1528900750.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:10.874Z,1528900750.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:10.892Z,1528900750.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:11.275Z,1528900751.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:11.293Z,1528900751.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:11.674Z,1528900751.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:11.692Z,1528900751.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:12.063Z,1528900752.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:12.086Z,1528900752.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:12.466Z,1528900752.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:12.484Z,1528900752.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:12.866Z,1528900752.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:12.883Z,1528900752.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:13.263Z,1528900753.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:13.293Z,1528900753.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:13.679Z,1528900753.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:13.704Z,1528900753.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:14.078Z,1528900754.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:14.104Z,1528900754.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:14.475Z,1528900754.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:14.494Z,1528900754.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:14.863Z,1528900754.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:14.896Z,1528900754.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:15.266Z,1528900755.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:15.288Z,1528900755.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:15.664Z,1528900755.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:15.683Z,1528900755.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:16.055Z,1528900756.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:16.092Z,1528900756.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:16.465Z,1528900756.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:16.483Z,1528900756.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:16.873Z,1528900756.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:16.896Z,1528900756.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:17.279Z,1528900757.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:17.302Z,1528900757.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:17.675Z,1528900757.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:17.693Z,1528900757.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:18.063Z,1528900758.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:18.086Z,1528900758.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:18.466Z,1528900758.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:18.484Z,1528900758.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:18.866Z,1528900758.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:18.883Z,1528900758.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:19.262Z,1528900759.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:19.286Z,1528900759.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:19.679Z,1528900759.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:19.697Z,1528900759.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:20.078Z,1528900760.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:20.096Z,1528900760.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:20.474Z,1528900760.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:20.492Z,1528900760.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:20.866Z,1528900760.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:20.884Z,1528900760.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:21.265Z,1528900761.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:21.282Z,1528900761.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:21.664Z,1528900761.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:21.682Z,1528900761.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:22.064Z,1528900762.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:22.096Z,1528900762.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:22.465Z,1528900762.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:22.483Z,1528900762.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:22.875Z,1528900762.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:22.893Z,1528900762.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:23.278Z,1528900763.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:23.307Z,1528900763.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:23.675Z,1528900763.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:23.693Z,1528900763.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:24.063Z,1528900764.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:24.088Z,1528900764.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:24.466Z,1528900764.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:24.489Z,1528900764.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:24.871Z,1528900764.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:24.888Z,1528900764.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:25.263Z,1528900765.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:25.297Z,1528900765.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:25.681Z,1528900765.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:25.704Z,1528900765.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:26.075Z,1528900766.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:26.094Z,1528900766.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:26.476Z,1528900766.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:26.494Z,1528900766.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:26.869Z,1528900766.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:26.887Z,1528900766.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:27.255Z,1528900767.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:27.284Z,1528900767.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:27.659Z,1528900767.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:27.687Z,1528900767.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:28.060Z,1528900768.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:28.097Z,1528900768.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:28.459Z,1528900768.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:28.492Z,1528900768.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:28.875Z,1528900768.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:28.911Z,1528900768.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:29.280Z,1528900769.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:29.304Z,1528900769.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:29.672Z,1528900769.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:29.693Z,1528900769.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:30.059Z,1528900770.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:30.096Z,1528900770.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:30.459Z,1528900770.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:30.500Z,1528900770.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:30.860Z,1528900770.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:30.892Z,1528900770.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:31.259Z,1528900771.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:31.292Z,1528900771.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:31.680Z,1528900771.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:31.704Z,1528900771.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:32.076Z,1528900772.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:32.094Z,1528900772.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:32.475Z,1528900772.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:32.493Z,1528900772.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:32.859Z,1528900772.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:32.894Z,1528900772.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:33.255Z,1528900773.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:33.307Z,1528900773.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:33.660Z,1528900773.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:33.693Z,1528900773.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:34.060Z,1528900774.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:34.078Z,1528900774.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:34.463Z,1528900774.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:34.480Z,1528900774.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:34.873Z,1528900774.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:34.907Z,1528900774.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:35.273Z,1528900775.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:35.291Z,1528900775.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:35.666Z,1528900775.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:35.684Z,1528900775.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:36.064Z,1528900776.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:36.088Z,1528900776.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:36.466Z,1528900776.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:36.484Z,1528900776.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:36.865Z,1528900776.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:36.883Z,1528900776.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:37.264Z,1528900777.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:37.281Z,1528900777.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:37.673Z,1528900777.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:37.692Z,1528900777.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:38.073Z,1528900778.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:38.091Z,1528900778.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:38.470Z,1528900778.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:38.487Z,1528900778.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:38.865Z,1528900778.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:38.888Z,1528900778.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:39.264Z,1528900779.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:39.282Z,1528900779.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:39.663Z,1528900779.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:39.680Z,1528900779.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:40.065Z,1528900780.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:40.083Z,1528900780.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:40.461Z,1528900780.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:40.484Z,1528900780.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:40.870Z,1528900780.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:40.892Z,1528900780.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:41.273Z,1528900781.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:41.291Z,1528900781.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:41.674Z,1528900781.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:41.692Z,1528900781.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:42.065Z,1528900782.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:42.083Z,1528900782.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:45.170Z,1528900785.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:45.188Z,1528900785.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:45.331Z,1528900785.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:45.372Z,1528900785.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:45.737Z,1528900785.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:45.775Z,1528900785.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:46.141Z,1528900786.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:46.175Z,1528900786.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:46.537Z,1528900786.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:46.555Z,1528900786.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:46.928Z,1528900786.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:46.946Z,1528900786.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:47.330Z,1528900787.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:47.348Z,1528900787.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:47.723Z,1528900787.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:47.757Z,1528900787.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:48.130Z,1528900788.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:48.148Z,1528900788.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:48.527Z,1528900788.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:48.557Z,1528900788.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:48.939Z,1528900788.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:48.957Z,1528900788.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:49.339Z,1528900789.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:49.356Z,1528900789.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:49.739Z,1528900789.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:49.757Z,1528900789.757 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:49.757Z,1528900789.757 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 224
2018-06-13T14:39:49.758Z,1528900789.758 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:39:49.759Z,1528900789.759 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:49.759Z,1528900789.759 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 224
2018-06-13T14:39:49.759Z,1528900789.759 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:39:49.761Z,1528900789.761 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:49.761Z,1528900789.761 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 224
2018-06-13T14:39:49.762Z,1528900789.762 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:39:49.853Z,1528900789.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:39:49.853Z,1528900789.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:39:49.854Z,1528900789.854 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:39:50.119Z,1528900790.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:50.234Z,1528900790.234 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:39:50.235Z,1528900790.235 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 224
2018-06-13T14:39:50.235Z,1528900790.235 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:39:50.235Z,1528900790.235 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 224
2018-06-13T14:39:50.236Z,1528900790.236 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:39:50.236Z,1528900790.236 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 224
2018-06-13T14:39:50.519Z,1528900790.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:50.555Z,1528900790.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:39:50.556Z,1528900790.556 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:39:50.556Z,1528900790.556 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:39:50.556Z,1528900790.556 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:39:50.557Z,1528900790.557 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:39:50.557Z,1528900790.557 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:39:50.558Z,1528900790.558 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:39:50.558Z,1528900790.558 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:39:50.558Z,1528900790.558 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:39:50.920Z,1528900790.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:50.956Z,1528900790.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:39:50.957Z,1528900790.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:51.320Z,1528900791.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:51.350Z,1528900791.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:39:51.350Z,1528900791.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:51.734Z,1528900791.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:51.768Z,1528900791.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:39:51.769Z,1528900791.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:52.142Z,1528900792.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:52.167Z,1528900792.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:39:52.168Z,1528900792.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:52.530Z,1528900792.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:52.557Z,1528900792.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:39:52.558Z,1528900792.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:52.923Z,1528900792.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:52.956Z,1528900792.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:39:52.965Z,1528900792.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:53.323Z,1528900793.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:53.354Z,1528900793.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:39:53.355Z,1528900793.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:53.723Z,1528900793.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:53.740Z,1528900793.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:39:53.742Z,1528900793.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:54.127Z,1528900794.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:54.145Z,1528900794.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:39:54.146Z,1528900794.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:54.526Z,1528900794.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:54.544Z,1528900794.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:39:54.544Z,1528900794.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:54.930Z,1528900794.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:54.947Z,1528900794.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:39:54.948Z,1528900794.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:55.337Z,1528900795.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:55.355Z,1528900795.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:39:55.356Z,1528900795.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:55.737Z,1528900795.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:55.755Z,1528900795.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:39:55.756Z,1528900795.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:56.132Z,1528900796.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:56.150Z,1528900796.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:39:56.151Z,1528900796.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:56.525Z,1528900796.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:56.545Z,1528900796.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:39:56.546Z,1528900796.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:56.930Z,1528900796.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:56.947Z,1528900796.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:39:56.948Z,1528900796.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:57.329Z,1528900797.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:57.346Z,1528900797.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:39:57.347Z,1528900797.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:57.734Z,1528900797.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:57.756Z,1528900797.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:39:57.757Z,1528900797.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:58.138Z,1528900798.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:58.156Z,1528900798.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:39:58.157Z,1528900798.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:58.534Z,1528900798.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:58.556Z,1528900798.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:39:58.557Z,1528900798.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:58.927Z,1528900798.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:58.952Z,1528900798.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:39:58.957Z,1528900798.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:59.327Z,1528900799.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:59.351Z,1528900799.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:39:59.352Z,1528900799.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:39:59.723Z,1528900799.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:39:59.745Z,1528900799.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:39:59.746Z,1528900799.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:00.127Z,1528900800.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:00.150Z,1528900800.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:40:00.151Z,1528900800.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:00.527Z,1528900800.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:00.551Z,1528900800.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:40:00.552Z,1528900800.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:00.938Z,1528900800.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:00.956Z,1528900800.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:40:00.957Z,1528900800.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:01.338Z,1528900801.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:01.360Z,1528900801.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:40:01.361Z,1528900801.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:01.739Z,1528900801.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:01.756Z,1528900801.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:40:01.757Z,1528900801.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:02.123Z,1528900802.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:02.146Z,1528900802.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:40:02.147Z,1528900802.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:02.523Z,1528900802.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:02.559Z,1528900802.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:40:02.559Z,1528900802.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:02.924Z,1528900802.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:02.950Z,1528900802.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:40:02.951Z,1528900802.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:03.323Z,1528900803.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:03.356Z,1528900803.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:40:03.357Z,1528900803.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:03.739Z,1528900803.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:03.757Z,1528900803.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:40:03.758Z,1528900803.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:04.144Z,1528900804.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:04.168Z,1528900804.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:40:04.169Z,1528900804.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:04.539Z,1528900804.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:04.557Z,1528900804.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:40:04.558Z,1528900804.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:04.923Z,1528900804.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:04.959Z,1528900804.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:40:04.960Z,1528900804.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:05.323Z,1528900805.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:05.361Z,1528900805.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:40:05.362Z,1528900805.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:05.723Z,1528900805.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:05.760Z,1528900805.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:40:05.765Z,1528900805.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:06.123Z,1528900806.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:06.150Z,1528900806.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:40:06.151Z,1528900806.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:06.523Z,1528900806.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:06.561Z,1528900806.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:40:06.562Z,1528900806.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:06.933Z,1528900806.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:06.969Z,1528900806.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:40:06.970Z,1528900806.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:07.344Z,1528900807.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:07.368Z,1528900807.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:40:07.368Z,1528900807.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:07.744Z,1528900807.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:07.762Z,1528900807.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:40:07.763Z,1528900807.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:08.123Z,1528900808.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:08.158Z,1528900808.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:40:08.159Z,1528900808.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:08.523Z,1528900808.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:08.556Z,1528900808.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:40:08.561Z,1528900808.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:08.924Z,1528900808.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:08.964Z,1528900808.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:40:08.965Z,1528900808.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:09.323Z,1528900809.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:09.340Z,1528900809.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:40:09.357Z,1528900809.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:09.734Z,1528900809.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:09.768Z,1528900809.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:10.137Z,1528900810.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:10.166Z,1528900810.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:10.533Z,1528900810.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:10.569Z,1528900810.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:10.927Z,1528900810.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:10.944Z,1528900810.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:11.327Z,1528900811.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:11.345Z,1528900811.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:11.722Z,1528900811.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:11.740Z,1528900811.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:12.127Z,1528900812.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:12.152Z,1528900812.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:12.531Z,1528900812.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:12.548Z,1528900812.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:12.937Z,1528900812.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:12.955Z,1528900812.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:13.338Z,1528900813.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:13.360Z,1528900813.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:13.738Z,1528900813.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:13.785Z,1528900813.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:14.130Z,1528900814.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:14.147Z,1528900814.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:14.529Z,1528900814.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:14.552Z,1528900814.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:14.930Z,1528900814.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:14.949Z,1528900814.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:15.329Z,1528900815.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:15.349Z,1528900815.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:15.738Z,1528900815.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:15.757Z,1528900815.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:16.138Z,1528900816.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:16.164Z,1528900816.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:16.535Z,1528900816.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:16.554Z,1528900816.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:16.927Z,1528900816.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:16.949Z,1528900816.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:17.335Z,1528900817.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:17.352Z,1528900817.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:17.729Z,1528900817.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:17.746Z,1528900817.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:18.127Z,1528900818.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:18.150Z,1528900818.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:18.527Z,1528900818.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:18.551Z,1528900818.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:18.935Z,1528900818.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:18.952Z,1528900818.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:19.337Z,1528900819.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:19.355Z,1528900819.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:19.739Z,1528900819.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:19.756Z,1528900819.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:20.129Z,1528900820.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:20.147Z,1528900820.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:20.519Z,1528900820.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:20.555Z,1528900820.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:20.930Z,1528900820.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:20.948Z,1528900820.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:21.319Z,1528900821.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:21.356Z,1528900821.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:21.739Z,1528900821.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:21.757Z,1528900821.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:22.144Z,1528900822.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:22.162Z,1528900822.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:22.540Z,1528900822.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:22.557Z,1528900822.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:22.919Z,1528900822.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:22.955Z,1528900822.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:23.323Z,1528900823.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:23.360Z,1528900823.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:23.719Z,1528900823.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:23.736Z,1528900823.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:24.125Z,1528900824.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:24.158Z,1528900824.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:24.523Z,1528900824.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:24.541Z,1528900824.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:24.937Z,1528900824.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:24.971Z,1528900824.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:25.337Z,1528900825.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:25.372Z,1528900825.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:25.741Z,1528900825.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:25.770Z,1528900825.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:26.128Z,1528900826.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:26.145Z,1528900826.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:26.526Z,1528900826.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:26.544Z,1528900826.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:26.927Z,1528900826.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:26.946Z,1528900826.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:27.326Z,1528900827.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:27.344Z,1528900827.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:27.737Z,1528900827.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:27.771Z,1528900827.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:28.137Z,1528900828.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:28.156Z,1528900828.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:28.534Z,1528900828.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:28.556Z,1528900828.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:28.929Z,1528900828.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:28.947Z,1528900828.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:29.330Z,1528900829.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:29.348Z,1528900829.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:29.729Z,1528900829.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:29.747Z,1528900829.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:30.128Z,1528900830.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:30.152Z,1528900830.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:30.529Z,1528900830.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:30.547Z,1528900830.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:30.935Z,1528900830.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:30.953Z,1528900830.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:31.338Z,1528900831.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:31.355Z,1528900831.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:31.738Z,1528900831.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:31.768Z,1528900831.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:32.129Z,1528900832.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:32.147Z,1528900832.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:32.528Z,1528900832.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:32.547Z,1528900832.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:32.927Z,1528900832.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:32.954Z,1528900832.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:33.319Z,1528900833.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:33.355Z,1528900833.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:33.739Z,1528900833.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:33.758Z,1528900833.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:34.143Z,1528900834.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:34.162Z,1528900834.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:34.539Z,1528900834.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:34.556Z,1528900834.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:34.928Z,1528900834.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:34.946Z,1528900834.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:35.319Z,1528900835.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:35.357Z,1528900835.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:35.720Z,1528900835.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:35.760Z,1528900835.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:36.122Z,1528900836.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:36.155Z,1528900836.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:36.523Z,1528900836.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:36.557Z,1528900836.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:36.940Z,1528900836.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:36.958Z,1528900836.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:37.343Z,1528900837.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:37.360Z,1528900837.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:37.745Z,1528900837.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:37.768Z,1528900837.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:38.123Z,1528900838.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:38.155Z,1528900838.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:38.523Z,1528900838.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:38.555Z,1528900838.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:38.924Z,1528900838.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:38.960Z,1528900838.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:39.323Z,1528900839.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:39.355Z,1528900839.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:39.740Z,1528900839.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:39.758Z,1528900839.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:40.144Z,1528900840.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:40.162Z,1528900840.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:40.544Z,1528900840.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:40.568Z,1528900840.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:40.923Z,1528900840.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:40.955Z,1528900840.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:41.323Z,1528900841.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:41.362Z,1528900841.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:41.727Z,1528900841.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:41.759Z,1528900841.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:42.124Z,1528900842.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:42.161Z,1528900842.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:45.252Z,1528900845.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:45.271Z,1528900845.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:45.274Z,1528900845.274 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T14:35:42.2Z
2018-06-13T14:40:45.274Z,1528900845.274 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T14:40:45.274Z,1528900845.274 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T14:40:45.398Z,1528900845.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:45.440Z,1528900845.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:46.578Z,1528900846.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:46.619Z,1528900846.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:46.746Z,1528900846.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:46.806Z,1528900846.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:47.135Z,1528900847.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:47.162Z,1528900847.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:47.535Z,1528900847.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:47.565Z,1528900847.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:50.649Z,1528900850.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:50.667Z,1528900850.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:50.757Z,1528900850.757 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0260.lzma
2018-06-13T14:40:50.787Z,1528900850.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:50.839Z,1528900850.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:51.203Z,1528900851.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:51.240Z,1528900851.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:51.554Z,1528900851.554 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0260.lzma.bak
2018-06-13T14:40:51.554Z,1528900851.554 [DataOverHttps](INFO): SBD MOMSN=8329395
2018-06-13T14:40:51.615Z,1528900851.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:51.633Z,1528900851.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:53.514Z,1528900853.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:53.536Z,1528900853.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:53.679Z,1528900853.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:53.712Z,1528900853.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:56.806Z,1528900856.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:56.823Z,1528900856.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:56.931Z,1528900856.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:56.961Z,1528900856.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:57.355Z,1528900857.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:57.374Z,1528900857.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:57.753Z,1528900857.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:57.779Z,1528900857.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:58.145Z,1528900858.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:58.185Z,1528900858.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:58.539Z,1528900858.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:58.572Z,1528900858.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:58.940Z,1528900858.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:58.974Z,1528900858.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:59.339Z,1528900859.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:59.380Z,1528900859.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:40:59.749Z,1528900859.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:40:59.783Z,1528900859.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:00.149Z,1528900860.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:00.167Z,1528900860.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:00.553Z,1528900860.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:00.571Z,1528900860.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:00.946Z,1528900860.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:00.964Z,1528900860.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:01.345Z,1528900861.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:01.363Z,1528900861.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:01.745Z,1528900861.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:01.763Z,1528900861.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:02.149Z,1528900862.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:02.167Z,1528900862.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:05.254Z,1528900865.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:05.272Z,1528900865.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:05.392Z,1528900865.392 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0261.lzma
2018-06-13T14:41:05.416Z,1528900865.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:05.460Z,1528900865.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:05.807Z,1528900865.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:05.848Z,1528900865.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:06.182Z,1528900866.182 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0261.lzma.bak
2018-06-13T14:41:06.182Z,1528900866.182 [DataOverHttps](INFO): SBD MOMSN=8329397
2018-06-13T14:41:06.218Z,1528900866.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:06.257Z,1528900866.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:08.144Z,1528900868.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:08.162Z,1528900868.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:08.165Z,1528900868.165 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T14:41:08.165Z,1528900868.165 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T14:41:08.165Z,1528900868.165 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T14:41:08.282Z,1528900868.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:08.328Z,1528900868.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:11.429Z,1528900871.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:11.447Z,1528900871.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:11.598Z,1528900871.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:11.647Z,1528900871.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:11.983Z,1528900871.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:12.000Z,1528900872.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:12.387Z,1528900872.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:12.405Z,1528900872.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:12.782Z,1528900872.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:12.800Z,1528900872.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:13.182Z,1528900873.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:13.200Z,1528900873.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:13.586Z,1528900873.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:13.604Z,1528900873.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:13.990Z,1528900873.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:14.008Z,1528900874.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:14.393Z,1528900874.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:14.416Z,1528900874.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:14.794Z,1528900874.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:14.820Z,1528900874.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:15.180Z,1528900875.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:15.203Z,1528900875.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:15.589Z,1528900875.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:15.607Z,1528900875.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:15.984Z,1528900875.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:16.017Z,1528900876.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:16.387Z,1528900876.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:16.404Z,1528900876.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:16.791Z,1528900876.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:16.810Z,1528900876.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:17.194Z,1528900877.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:17.220Z,1528900877.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:17.595Z,1528900877.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:17.620Z,1528900877.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:17.983Z,1528900877.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:18.012Z,1528900878.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:18.379Z,1528900878.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:18.417Z,1528900878.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:18.775Z,1528900878.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:18.811Z,1528900878.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:19.180Z,1528900879.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:19.221Z,1528900879.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:19.580Z,1528900879.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:19.615Z,1528900879.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:19.991Z,1528900879.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:20.010Z,1528900880.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:20.399Z,1528900880.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:20.424Z,1528900880.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:20.799Z,1528900880.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:20.817Z,1528900880.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:21.175Z,1528900881.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:21.211Z,1528900881.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:21.575Z,1528900881.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:21.603Z,1528900881.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:21.980Z,1528900881.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:22.008Z,1528900882.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:22.379Z,1528900882.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:22.414Z,1528900882.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:22.795Z,1528900882.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:22.813Z,1528900882.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:23.200Z,1528900883.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:23.228Z,1528900883.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:23.591Z,1528900883.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:23.610Z,1528900883.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:23.980Z,1528900883.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:24.020Z,1528900884.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:24.379Z,1528900884.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:24.414Z,1528900884.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:24.785Z,1528900884.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:24.817Z,1528900884.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:25.199Z,1528900885.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:25.217Z,1528900885.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:25.593Z,1528900885.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:25.631Z,1528900885.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:25.980Z,1528900885.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:26.011Z,1528900886.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:26.379Z,1528900886.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:26.512Z,1528900886.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:26.800Z,1528900886.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:26.860Z,1528900886.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:27.196Z,1528900887.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:27.214Z,1528900887.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:27.602Z,1528900887.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:27.670Z,1528900887.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:27.976Z,1528900887.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:28.006Z,1528900888.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:28.379Z,1528900888.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:28.435Z,1528900888.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:28.789Z,1528900888.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:28.827Z,1528900888.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:29.189Z,1528900889.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:29.263Z,1528900889.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:29.590Z,1528900889.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:29.624Z,1528900889.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:29.980Z,1528900889.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:30.014Z,1528900890.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:30.382Z,1528900890.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:30.404Z,1528900890.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:30.793Z,1528900890.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:30.827Z,1528900890.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:31.194Z,1528900891.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:31.212Z,1528900891.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:31.589Z,1528900891.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:31.608Z,1528900891.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:31.982Z,1528900891.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:32.000Z,1528900892.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:32.384Z,1528900892.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:32.402Z,1528900892.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:32.789Z,1528900892.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:32.807Z,1528900892.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:33.189Z,1528900893.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:33.208Z,1528900893.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:33.593Z,1528900893.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:33.611Z,1528900893.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:33.986Z,1528900893.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:34.004Z,1528900894.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:34.379Z,1528900894.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:34.410Z,1528900894.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:34.791Z,1528900894.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:34.809Z,1528900894.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:35.194Z,1528900895.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:35.255Z,1528900895.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:35.590Z,1528900895.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:35.608Z,1528900895.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:35.978Z,1528900895.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:36.016Z,1528900896.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:36.382Z,1528900896.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:36.399Z,1528900896.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:36.795Z,1528900896.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:36.814Z,1528900896.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:37.194Z,1528900897.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:37.216Z,1528900897.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:37.594Z,1528900897.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:37.613Z,1528900897.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:37.979Z,1528900897.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:38.004Z,1528900898.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:38.383Z,1528900898.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:38.406Z,1528900898.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:38.795Z,1528900898.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:38.813Z,1528900898.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:39.194Z,1528900899.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:39.212Z,1528900899.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:39.594Z,1528900899.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:39.612Z,1528900899.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:39.986Z,1528900899.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:40.004Z,1528900900.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:40.379Z,1528900900.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:40.402Z,1528900900.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:40.795Z,1528900900.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:40.813Z,1528900900.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:41.194Z,1528900901.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:41.219Z,1528900901.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:41.591Z,1528900901.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:41.609Z,1528900901.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:41.983Z,1528900901.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:42.006Z,1528900902.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:42.385Z,1528900902.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:42.403Z,1528900902.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:42.790Z,1528900902.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:42.816Z,1528900902.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:43.194Z,1528900903.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:43.216Z,1528900903.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:43.595Z,1528900903.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:43.613Z,1528900903.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:43.981Z,1528900903.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:43.999Z,1528900903.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:44.383Z,1528900904.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:44.406Z,1528900904.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:44.794Z,1528900904.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:44.812Z,1528900904.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:45.194Z,1528900905.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:45.212Z,1528900905.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:45.594Z,1528900905.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:45.612Z,1528900905.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:45.982Z,1528900905.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:46.004Z,1528900906.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:46.381Z,1528900906.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:46.399Z,1528900906.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:46.794Z,1528900906.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:46.812Z,1528900906.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:47.194Z,1528900907.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:47.212Z,1528900907.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:47.595Z,1528900907.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:47.612Z,1528900907.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:47.983Z,1528900907.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:48.006Z,1528900908.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:48.386Z,1528900908.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:48.404Z,1528900908.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:48.791Z,1528900908.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:48.809Z,1528900908.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:49.194Z,1528900909.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:49.216Z,1528900909.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:49.595Z,1528900909.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:49.613Z,1528900909.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:49.979Z,1528900909.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:50.003Z,1528900910.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:50.383Z,1528900910.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:50.407Z,1528900910.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:50.794Z,1528900910.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:50.812Z,1528900910.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:51.195Z,1528900911.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:51.214Z,1528900911.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:51.595Z,1528900911.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:51.613Z,1528900911.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:51.982Z,1528900911.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:52.004Z,1528900912.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:52.379Z,1528900912.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:52.418Z,1528900912.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:52.795Z,1528900912.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:52.813Z,1528900912.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:53.195Z,1528900913.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:53.247Z,1528900913.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:53.595Z,1528900913.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:53.620Z,1528900913.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:53.984Z,1528900913.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:54.014Z,1528900914.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:54.375Z,1528900914.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:54.405Z,1528900914.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:54.797Z,1528900914.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:54.820Z,1528900914.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:55.202Z,1528900915.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:55.224Z,1528900915.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:55.600Z,1528900915.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:55.617Z,1528900915.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:55.980Z,1528900915.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:56.016Z,1528900916.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:56.379Z,1528900916.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:56.412Z,1528900916.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:56.797Z,1528900916.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:56.819Z,1528900916.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:57.198Z,1528900917.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:57.216Z,1528900917.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:57.600Z,1528900917.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:57.618Z,1528900917.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:57.979Z,1528900917.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:58.013Z,1528900918.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:58.379Z,1528900918.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:58.412Z,1528900918.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:58.796Z,1528900918.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:58.817Z,1528900918.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:59.198Z,1528900919.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:59.222Z,1528900919.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:59.585Z,1528900919.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:41:59.620Z,1528900919.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:41:59.983Z,1528900919.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:00.019Z,1528900920.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:00.375Z,1528900920.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:00.404Z,1528900920.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:00.789Z,1528900920.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:00.824Z,1528900920.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:01.200Z,1528900921.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:01.221Z,1528900921.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:01.600Z,1528900921.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:01.618Z,1528900921.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:01.980Z,1528900921.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:02.019Z,1528900922.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:02.380Z,1528900922.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:02.414Z,1528900922.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:02.779Z,1528900922.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:02.796Z,1528900922.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:03.185Z,1528900923.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:03.219Z,1528900923.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:03.593Z,1528900923.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:03.627Z,1528900923.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:03.990Z,1528900923.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:04.019Z,1528900924.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:04.379Z,1528900924.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:04.396Z,1528900924.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:04.779Z,1528900924.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:04.796Z,1528900924.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:05.180Z,1528900925.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:05.197Z,1528900925.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:05.579Z,1528900925.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:05.596Z,1528900925.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:05.993Z,1528900925.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:06.027Z,1528900926.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:06.397Z,1528900926.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:06.426Z,1528900926.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:06.793Z,1528900926.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:06.831Z,1528900926.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:07.182Z,1528900927.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:07.204Z,1528900927.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:07.582Z,1528900927.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:07.600Z,1528900927.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:07.980Z,1528900927.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:07.998Z,1528900927.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:08.382Z,1528900928.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:08.408Z,1528900928.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:08.787Z,1528900928.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:08.804Z,1528900928.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:11.905Z,1528900931.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:11.931Z,1528900931.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:12.074Z,1528900932.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:12.108Z,1528900932.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:12.472Z,1528900932.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:12.490Z,1528900932.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:12.847Z,1528900932.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:12.887Z,1528900932.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:13.248Z,1528900933.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:13.274Z,1528900933.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:13.647Z,1528900933.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:13.665Z,1528900933.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:14.057Z,1528900934.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:14.092Z,1528900934.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:14.461Z,1528900934.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:14.495Z,1528900934.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:14.865Z,1528900934.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:14.903Z,1528900934.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:15.252Z,1528900935.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:15.270Z,1528900935.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:15.653Z,1528900935.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:15.670Z,1528900935.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:16.054Z,1528900936.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:16.071Z,1528900936.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:16.454Z,1528900936.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:16.472Z,1528900936.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:16.862Z,1528900936.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:16.903Z,1528900936.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:17.261Z,1528900937.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:17.279Z,1528900937.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:17.659Z,1528900937.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:17.680Z,1528900937.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:18.054Z,1528900938.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:18.072Z,1528900938.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:18.454Z,1528900938.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:18.472Z,1528900938.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:18.859Z,1528900938.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:18.877Z,1528900938.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:19.262Z,1528900939.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:19.279Z,1528900939.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:19.666Z,1528900939.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:19.684Z,1528900939.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:20.047Z,1528900940.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:20.071Z,1528900940.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:20.451Z,1528900940.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:20.474Z,1528900940.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:20.863Z,1528900940.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:20.882Z,1528900940.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:21.262Z,1528900941.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:21.280Z,1528900941.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:21.663Z,1528900941.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:21.682Z,1528900941.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:22.046Z,1528900942.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:22.084Z,1528900942.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:22.443Z,1528900942.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:22.479Z,1528900942.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:22.863Z,1528900942.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:22.880Z,1528900942.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:23.267Z,1528900943.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:23.285Z,1528900943.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:23.664Z,1528900943.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:23.682Z,1528900943.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:24.054Z,1528900944.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:24.071Z,1528900944.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:24.454Z,1528900944.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:24.484Z,1528900944.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:24.859Z,1528900944.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:24.877Z,1528900944.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:25.267Z,1528900945.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:25.284Z,1528900945.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:25.667Z,1528900945.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:25.692Z,1528900945.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:26.048Z,1528900946.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:26.075Z,1528900946.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:26.447Z,1528900946.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:26.484Z,1528900946.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:26.863Z,1528900946.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:26.897Z,1528900946.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:27.266Z,1528900947.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:27.284Z,1528900947.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:27.663Z,1528900947.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:27.681Z,1528900947.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:28.048Z,1528900948.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:28.091Z,1528900948.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:28.447Z,1528900948.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:28.485Z,1528900948.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:28.857Z,1528900948.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:28.884Z,1528900948.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:29.261Z,1528900949.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:29.290Z,1528900949.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:29.657Z,1528900949.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:29.684Z,1528900949.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:30.048Z,1528900950.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:30.081Z,1528900950.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:30.447Z,1528900950.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:30.465Z,1528900950.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:30.857Z,1528900950.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:30.891Z,1528900950.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:31.265Z,1528900951.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:31.299Z,1528900951.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:31.662Z,1528900951.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:31.695Z,1528900951.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:32.051Z,1528900952.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:32.068Z,1528900952.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:32.450Z,1528900952.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:32.467Z,1528900952.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:32.861Z,1528900952.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:32.879Z,1528900952.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:33.263Z,1528900953.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:33.280Z,1528900953.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:33.657Z,1528900953.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:33.675Z,1528900953.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:34.052Z,1528900954.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:34.086Z,1528900954.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:34.453Z,1528900954.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:34.470Z,1528900954.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:34.858Z,1528900954.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:34.880Z,1528900954.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:35.261Z,1528900955.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:35.280Z,1528900955.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:35.658Z,1528900955.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:35.680Z,1528900955.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:36.058Z,1528900956.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:36.076Z,1528900956.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:36.454Z,1528900956.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:36.472Z,1528900956.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:36.858Z,1528900956.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:36.880Z,1528900956.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:37.261Z,1528900957.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:37.279Z,1528900957.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:37.661Z,1528900957.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:37.679Z,1528900957.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:38.052Z,1528900958.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:38.078Z,1528900958.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:38.454Z,1528900958.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:38.472Z,1528900958.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:38.864Z,1528900958.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:38.888Z,1528900958.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:39.261Z,1528900959.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:39.279Z,1528900959.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:39.663Z,1528900959.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:39.681Z,1528900959.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:40.055Z,1528900960.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:40.074Z,1528900960.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:40.447Z,1528900960.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:40.471Z,1528900960.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:40.865Z,1528900960.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:40.883Z,1528900960.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:41.263Z,1528900961.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:41.281Z,1528900961.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:41.659Z,1528900961.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:41.684Z,1528900961.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:42.053Z,1528900962.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:42.076Z,1528900962.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:42.449Z,1528900962.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:42.469Z,1528900962.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:42.859Z,1528900962.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:42.878Z,1528900962.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:43.262Z,1528900963.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:43.281Z,1528900963.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:43.662Z,1528900963.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:43.681Z,1528900963.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:44.053Z,1528900964.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:44.071Z,1528900964.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:44.453Z,1528900964.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:44.471Z,1528900964.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:44.854Z,1528900964.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:44.872Z,1528900964.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:45.262Z,1528900965.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:45.280Z,1528900965.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:45.662Z,1528900965.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:45.684Z,1528900965.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:46.062Z,1528900966.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:46.084Z,1528900966.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:46.447Z,1528900966.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:46.470Z,1528900966.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:46.853Z,1528900966.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:46.871Z,1528900966.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:47.254Z,1528900967.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:47.271Z,1528900967.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:47.653Z,1528900967.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:47.671Z,1528900967.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:48.062Z,1528900968.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:48.079Z,1528900968.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:48.462Z,1528900968.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:48.480Z,1528900968.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:48.859Z,1528900968.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:48.877Z,1528900968.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:49.253Z,1528900969.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:49.270Z,1528900969.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:49.653Z,1528900969.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:49.680Z,1528900969.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:50.047Z,1528900970.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:50.070Z,1528900970.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:50.453Z,1528900970.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:50.471Z,1528900970.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:50.853Z,1528900970.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:50.871Z,1528900970.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:50.871Z,1528900970.871 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 225
2018-06-13T14:42:50.871Z,1528900970.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:42:50.873Z,1528900970.873 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:50.873Z,1528900970.873 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 225
2018-06-13T14:42:50.873Z,1528900970.873 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:42:50.875Z,1528900970.875 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:50.875Z,1528900970.875 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 225
2018-06-13T14:42:50.875Z,1528900970.875 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:42:50.949Z,1528900970.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:42:50.949Z,1528900970.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:42:50.949Z,1528900970.949 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:42:51.263Z,1528900971.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:51.359Z,1528900971.359 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:42:51.359Z,1528900971.359 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 225
2018-06-13T14:42:51.359Z,1528900971.359 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:42:51.359Z,1528900971.359 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 225
2018-06-13T14:42:51.360Z,1528900971.360 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:42:51.360Z,1528900971.360 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 225
2018-06-13T14:42:51.663Z,1528900971.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:51.680Z,1528900971.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:42:51.680Z,1528900971.680 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:42:51.681Z,1528900971.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:42:51.681Z,1528900971.681 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:42:51.681Z,1528900971.681 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:42:51.682Z,1528900971.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:42:51.682Z,1528900971.682 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:42:51.683Z,1528900971.683 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:42:51.683Z,1528900971.683 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:42:52.068Z,1528900972.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:52.086Z,1528900972.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:42:52.086Z,1528900972.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:52.447Z,1528900972.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:52.480Z,1528900972.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:42:52.481Z,1528900972.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:52.847Z,1528900972.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:52.864Z,1528900972.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:42:52.881Z,1528900972.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:53.247Z,1528900973.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:53.265Z,1528900973.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:42:53.266Z,1528900973.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:53.647Z,1528900973.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:53.665Z,1528900973.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:42:53.666Z,1528900973.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:54.061Z,1528900974.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:54.099Z,1528900974.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:42:54.100Z,1528900974.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:54.465Z,1528900974.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:54.506Z,1528900974.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:42:54.507Z,1528900974.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:54.857Z,1528900974.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:54.875Z,1528900974.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:42:54.876Z,1528900974.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:55.246Z,1528900975.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:55.276Z,1528900975.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:42:55.285Z,1528900975.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:55.654Z,1528900975.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:55.671Z,1528900975.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:42:55.671Z,1528900975.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:56.052Z,1528900976.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:56.070Z,1528900976.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:42:56.071Z,1528900976.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:56.454Z,1528900976.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:56.471Z,1528900976.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:42:56.472Z,1528900976.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:56.850Z,1528900976.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:56.871Z,1528900976.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:42:56.872Z,1528900976.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:57.258Z,1528900977.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:57.276Z,1528900977.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:42:57.277Z,1528900977.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:57.662Z,1528900977.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:57.679Z,1528900977.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:42:57.680Z,1528900977.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:58.062Z,1528900978.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:58.083Z,1528900978.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:42:58.084Z,1528900978.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:58.452Z,1528900978.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:58.472Z,1528900978.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:42:58.473Z,1528900978.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:58.851Z,1528900978.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:58.868Z,1528900978.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:42:58.869Z,1528900978.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:59.254Z,1528900979.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:59.271Z,1528900979.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:42:59.272Z,1528900979.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:42:59.652Z,1528900979.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:42:59.676Z,1528900979.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:42:59.677Z,1528900979.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:00.058Z,1528900980.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:00.075Z,1528900980.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:43:00.076Z,1528900980.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:00.460Z,1528900980.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:00.478Z,1528900980.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:43:00.479Z,1528900980.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:00.858Z,1528900980.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:00.880Z,1528900980.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:43:00.881Z,1528900980.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:01.253Z,1528900981.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:01.271Z,1528900981.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:43:01.272Z,1528900981.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:01.653Z,1528900981.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:01.670Z,1528900981.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:43:01.671Z,1528900981.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:02.053Z,1528900982.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:02.071Z,1528900982.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:43:02.072Z,1528900982.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:02.451Z,1528900982.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:02.482Z,1528900982.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:43:02.483Z,1528900982.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:02.853Z,1528900982.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:02.870Z,1528900982.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:43:02.871Z,1528900982.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:03.259Z,1528900983.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:03.284Z,1528900983.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:43:03.305Z,1528900983.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:03.661Z,1528900983.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:03.679Z,1528900983.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:43:03.679Z,1528900983.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:04.061Z,1528900984.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:04.083Z,1528900984.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:43:04.084Z,1528900984.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:04.453Z,1528900984.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:04.470Z,1528900984.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:43:04.471Z,1528900984.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:04.851Z,1528900984.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:04.872Z,1528900984.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:43:04.874Z,1528900984.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:05.255Z,1528900985.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:05.272Z,1528900985.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:43:05.273Z,1528900985.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:05.653Z,1528900985.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:05.670Z,1528900985.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:43:05.671Z,1528900985.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:06.061Z,1528900986.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:06.079Z,1528900986.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:43:06.080Z,1528900986.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:06.461Z,1528900986.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:06.478Z,1528900986.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:43:06.479Z,1528900986.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:06.858Z,1528900986.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:06.880Z,1528900986.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:43:06.881Z,1528900986.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:07.253Z,1528900987.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:07.270Z,1528900987.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:43:07.271Z,1528900987.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:07.654Z,1528900987.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:07.671Z,1528900987.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:43:07.672Z,1528900987.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:08.054Z,1528900988.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:08.076Z,1528900988.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:43:08.077Z,1528900988.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:08.457Z,1528900988.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:08.474Z,1528900988.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:43:08.475Z,1528900988.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:08.858Z,1528900988.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:08.875Z,1528900988.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:43:08.876Z,1528900988.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:11.981Z,1528900991.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:12.008Z,1528900992.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:12.145Z,1528900992.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:12.180Z,1528900992.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:12.548Z,1528900992.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:12.566Z,1528900992.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:12.927Z,1528900992.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:12.963Z,1528900992.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:13.328Z,1528900993.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:13.364Z,1528900993.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:13.727Z,1528900993.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:13.766Z,1528900993.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:14.153Z,1528900994.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:14.171Z,1528900994.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:14.537Z,1528900994.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:14.571Z,1528900994.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:14.937Z,1528900994.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:14.968Z,1528900994.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:15.323Z,1528900995.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:15.363Z,1528900995.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:15.723Z,1528900995.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:15.763Z,1528900995.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:16.125Z,1528900996.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:16.165Z,1528900996.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:16.523Z,1528900996.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:16.557Z,1528900996.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:16.933Z,1528900996.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:16.967Z,1528900996.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:17.337Z,1528900997.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:17.366Z,1528900997.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:17.738Z,1528900997.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:17.764Z,1528900997.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:18.124Z,1528900998.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:18.142Z,1528900998.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:18.523Z,1528900998.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:18.541Z,1528900998.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:18.937Z,1528900998.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:18.971Z,1528900998.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:19.337Z,1528900999.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:19.379Z,1528900999.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:19.737Z,1528900999.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:19.777Z,1528900999.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:20.127Z,1528901000.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:20.144Z,1528901000.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:20.526Z,1528901000.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:20.544Z,1528901000.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:20.938Z,1528901000.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:20.975Z,1528901000.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:21.337Z,1528901001.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:21.355Z,1528901001.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:21.734Z,1528901001.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:21.751Z,1528901001.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:22.128Z,1528901002.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:22.146Z,1528901002.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:22.529Z,1528901002.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:22.547Z,1528901002.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:22.940Z,1528901002.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:22.958Z,1528901002.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:23.343Z,1528901003.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:23.360Z,1528901003.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:23.740Z,1528901003.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:23.758Z,1528901003.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:24.127Z,1528901004.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:24.157Z,1528901004.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:24.523Z,1528901004.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:24.552Z,1528901004.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:24.940Z,1528901004.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:24.964Z,1528901004.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:25.343Z,1528901005.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:25.360Z,1528901005.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:25.748Z,1528901005.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:25.772Z,1528901005.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:26.132Z,1528901006.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:26.150Z,1528901006.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:26.523Z,1528901006.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:26.557Z,1528901006.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:26.945Z,1528901006.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:26.963Z,1528901006.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:27.336Z,1528901007.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:27.369Z,1528901007.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:27.739Z,1528901007.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:27.762Z,1528901007.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:28.124Z,1528901008.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:28.166Z,1528901008.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:28.519Z,1528901008.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:28.556Z,1528901008.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:28.940Z,1528901008.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:28.958Z,1528901008.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:29.344Z,1528901009.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:29.362Z,1528901009.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:29.740Z,1528901009.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:29.764Z,1528901009.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:30.124Z,1528901010.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:30.160Z,1528901010.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:30.523Z,1528901010.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:30.552Z,1528901010.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:30.939Z,1528901010.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:30.958Z,1528901010.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:31.343Z,1528901011.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:31.362Z,1528901011.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:31.744Z,1528901011.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:31.763Z,1528901011.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:32.124Z,1528901012.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:32.155Z,1528901012.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:32.524Z,1528901012.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:32.551Z,1528901012.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:32.944Z,1528901012.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:32.962Z,1528901012.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:33.343Z,1528901013.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:33.361Z,1528901013.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:33.738Z,1528901013.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:33.760Z,1528901013.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:34.123Z,1528901014.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:34.154Z,1528901014.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:34.524Z,1528901014.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:34.553Z,1528901014.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:34.923Z,1528901014.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:34.960Z,1528901014.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:35.344Z,1528901015.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:35.362Z,1528901015.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:35.739Z,1528901015.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:35.757Z,1528901015.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:36.129Z,1528901016.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:36.163Z,1528901016.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:36.523Z,1528901016.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:36.558Z,1528901016.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:36.919Z,1528901016.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:36.953Z,1528901016.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:37.324Z,1528901017.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:37.362Z,1528901017.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:37.723Z,1528901017.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:37.758Z,1528901017.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:38.133Z,1528901018.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:38.167Z,1528901018.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:38.537Z,1528901018.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:38.564Z,1528901018.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:38.933Z,1528901018.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:38.973Z,1528901018.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:39.323Z,1528901019.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:39.342Z,1528901019.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:39.723Z,1528901019.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:39.740Z,1528901019.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:40.128Z,1528901020.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:40.146Z,1528901020.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:40.523Z,1528901020.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:40.540Z,1528901020.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:40.926Z,1528901020.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:40.944Z,1528901020.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:41.342Z,1528901021.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:41.376Z,1528901021.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:41.741Z,1528901021.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:41.774Z,1528901021.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:42.137Z,1528901022.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:42.175Z,1528901022.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:42.527Z,1528901022.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:42.545Z,1528901022.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:42.924Z,1528901022.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:42.959Z,1528901022.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:43.328Z,1528901023.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:43.352Z,1528901023.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:43.729Z,1528901023.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:43.747Z,1528901023.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:44.135Z,1528901024.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:44.153Z,1528901024.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:44.538Z,1528901024.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:44.556Z,1528901024.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:44.938Z,1528901024.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:44.956Z,1528901024.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:45.328Z,1528901025.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:45.346Z,1528901025.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:45.727Z,1528901025.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:45.752Z,1528901025.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:46.129Z,1528901026.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:46.148Z,1528901026.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:46.522Z,1528901026.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:46.561Z,1528901026.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:46.927Z,1528901026.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:46.958Z,1528901026.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:47.337Z,1528901027.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:47.355Z,1528901027.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:47.734Z,1528901027.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:47.756Z,1528901027.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:48.132Z,1528901028.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:48.169Z,1528901028.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:48.530Z,1528901028.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:48.548Z,1528901028.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:48.923Z,1528901028.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:48.947Z,1528901028.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:49.327Z,1528901029.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:49.351Z,1528901029.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:49.727Z,1528901029.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:49.752Z,1528901029.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:50.135Z,1528901030.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:50.153Z,1528901030.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:50.542Z,1528901030.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:50.559Z,1528901030.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:50.943Z,1528901030.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:50.961Z,1528901030.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:51.329Z,1528901031.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:51.347Z,1528901031.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:51.727Z,1528901031.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:51.750Z,1528901031.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:52.130Z,1528901032.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:52.153Z,1528901032.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:52.520Z,1528901032.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:52.551Z,1528901032.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:52.918Z,1528901032.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:52.952Z,1528901032.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:53.342Z,1528901033.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:53.364Z,1528901033.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:53.742Z,1528901033.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:53.760Z,1528901033.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:54.138Z,1528901034.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:54.156Z,1528901034.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:54.519Z,1528901034.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:54.553Z,1528901034.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:54.919Z,1528901034.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:54.955Z,1528901034.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:55.327Z,1528901035.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:55.361Z,1528901035.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:55.718Z,1528901035.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:55.756Z,1528901035.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:56.139Z,1528901036.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:56.157Z,1528901036.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:56.538Z,1528901036.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:56.567Z,1528901036.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:56.944Z,1528901036.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:56.962Z,1528901036.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:57.319Z,1528901037.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:57.353Z,1528901037.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:57.723Z,1528901037.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:57.764Z,1528901037.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:58.123Z,1528901038.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:58.150Z,1528901038.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:58.521Z,1528901038.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:58.539Z,1528901038.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:58.923Z,1528901038.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:58.957Z,1528901038.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:59.337Z,1528901039.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:59.371Z,1528901039.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:43:59.737Z,1528901039.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:43:59.755Z,1528901039.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:00.134Z,1528901040.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:00.151Z,1528901040.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:00.530Z,1528901040.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:00.547Z,1528901040.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:00.929Z,1528901040.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:00.952Z,1528901040.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:01.327Z,1528901041.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:01.349Z,1528901041.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:01.730Z,1528901041.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:01.748Z,1528901041.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:02.131Z,1528901042.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:02.149Z,1528901042.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:02.538Z,1528901042.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:02.556Z,1528901042.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:02.938Z,1528901042.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:02.956Z,1528901042.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:03.332Z,1528901043.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:03.350Z,1528901043.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:03.727Z,1528901043.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:03.758Z,1528901043.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:04.133Z,1528901044.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:04.156Z,1528901044.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:04.524Z,1528901044.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:04.550Z,1528901044.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:04.927Z,1528901044.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:04.958Z,1528901044.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:05.337Z,1528901045.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:05.355Z,1528901045.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:05.737Z,1528901045.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:05.755Z,1528901045.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:06.135Z,1528901046.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:06.153Z,1528901046.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:06.530Z,1528901046.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:06.548Z,1528901046.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:06.931Z,1528901046.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:06.968Z,1528901046.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:07.327Z,1528901047.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:07.359Z,1528901047.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:07.727Z,1528901047.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:07.762Z,1528901047.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:08.139Z,1528901048.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:08.164Z,1528901048.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:08.542Z,1528901048.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:08.564Z,1528901048.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:08.943Z,1528901048.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:08.968Z,1528901048.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:12.042Z,1528901052.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:12.060Z,1528901052.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:12.185Z,1528901052.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:12.222Z,1528901052.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:12.595Z,1528901052.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:12.614Z,1528901052.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:12.992Z,1528901052.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:13.016Z,1528901053.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:13.388Z,1528901053.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:13.415Z,1528901053.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:13.771Z,1528901053.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:13.807Z,1528901053.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:14.171Z,1528901054.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:14.199Z,1528901054.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:14.572Z,1528901054.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:14.609Z,1528901054.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:14.971Z,1528901054.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:15.006Z,1528901055.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:15.388Z,1528901055.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:15.407Z,1528901055.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:15.790Z,1528901055.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:15.808Z,1528901055.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:16.190Z,1528901056.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:16.228Z,1528901056.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:16.571Z,1528901056.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:16.609Z,1528901056.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:16.971Z,1528901056.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:16.988Z,1528901056.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:17.372Z,1528901057.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:17.390Z,1528901057.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:17.771Z,1528901057.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:17.789Z,1528901057.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:18.186Z,1528901058.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:18.250Z,1528901058.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:18.585Z,1528901058.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:18.604Z,1528901058.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:18.983Z,1528901058.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:19.001Z,1528901059.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:19.375Z,1528901059.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:19.398Z,1528901059.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:19.778Z,1528901059.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:19.795Z,1528901059.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:20.171Z,1528901060.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:20.195Z,1528901060.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:20.575Z,1528901060.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:20.607Z,1528901060.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:20.981Z,1528901060.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:20.999Z,1528901060.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:21.382Z,1528901061.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:21.401Z,1528901061.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:21.785Z,1528901061.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:21.803Z,1528901061.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:22.185Z,1528901062.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:22.204Z,1528901062.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:22.571Z,1528901062.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:22.594Z,1528901062.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:22.978Z,1528901062.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:22.996Z,1528901062.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:23.379Z,1528901063.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:23.398Z,1528901063.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:23.771Z,1528901063.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:23.794Z,1528901063.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:24.182Z,1528901064.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:24.223Z,1528901064.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:24.585Z,1528901064.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:24.604Z,1528901064.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:24.983Z,1528901064.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:25.002Z,1528901065.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:25.371Z,1528901065.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:25.394Z,1528901065.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:25.778Z,1528901065.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:25.804Z,1528901065.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:26.171Z,1528901066.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:26.195Z,1528901066.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:26.576Z,1528901066.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:26.603Z,1528901066.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:26.975Z,1528901066.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:27.002Z,1528901067.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:27.384Z,1528901067.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:27.404Z,1528901067.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:27.787Z,1528901067.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:27.805Z,1528901067.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:28.187Z,1528901068.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:28.206Z,1528901068.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:28.567Z,1528901068.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:28.604Z,1528901068.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:28.975Z,1528901068.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:28.999Z,1528901068.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:29.378Z,1528901069.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:29.398Z,1528901069.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:29.778Z,1528901069.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:29.801Z,1528901069.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:30.186Z,1528901070.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:30.206Z,1528901070.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:30.592Z,1528901070.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:30.611Z,1528901070.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:30.983Z,1528901070.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:31.002Z,1528901071.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:31.376Z,1528901071.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:31.403Z,1528901071.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:31.774Z,1528901071.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:31.805Z,1528901071.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:32.177Z,1528901072.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:32.195Z,1528901072.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:32.578Z,1528901072.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:32.595Z,1528901072.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:32.978Z,1528901072.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:32.996Z,1528901072.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:33.382Z,1528901073.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:33.400Z,1528901073.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:33.785Z,1528901073.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:33.804Z,1528901073.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:34.186Z,1528901074.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:34.204Z,1528901074.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:34.578Z,1528901074.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:34.596Z,1528901074.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:34.977Z,1528901074.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:34.994Z,1528901074.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:35.379Z,1528901075.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:35.398Z,1528901075.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:35.771Z,1528901075.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:35.794Z,1528901075.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:36.182Z,1528901076.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:36.205Z,1528901076.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:36.586Z,1528901076.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:36.605Z,1528901076.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:36.982Z,1528901076.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:37.000Z,1528901077.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:37.375Z,1528901077.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:37.409Z,1528901077.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:37.778Z,1528901077.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:37.795Z,1528901077.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:38.170Z,1528901078.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:38.203Z,1528901078.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:38.577Z,1528901078.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:38.595Z,1528901078.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:38.978Z,1528901078.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:38.996Z,1528901078.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:39.386Z,1528901079.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:39.405Z,1528901079.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:39.786Z,1528901079.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:39.805Z,1528901079.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:40.187Z,1528901080.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:40.212Z,1528901080.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:40.577Z,1528901080.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:40.594Z,1528901080.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:40.977Z,1528901080.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:40.994Z,1528901080.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:41.378Z,1528901081.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:41.412Z,1528901081.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:41.777Z,1528901081.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:41.794Z,1528901081.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:42.187Z,1528901082.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:42.206Z,1528901082.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:42.590Z,1528901082.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:42.609Z,1528901082.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:42.983Z,1528901082.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:43.002Z,1528901083.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:43.375Z,1528901083.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:43.399Z,1528901083.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:43.775Z,1528901083.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:43.801Z,1528901083.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:44.175Z,1528901084.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:44.199Z,1528901084.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:44.575Z,1528901084.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:44.606Z,1528901084.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:44.971Z,1528901084.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:45.001Z,1528901085.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:45.387Z,1528901085.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:45.406Z,1528901085.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:45.791Z,1528901085.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:45.809Z,1528901085.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:46.192Z,1528901086.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:46.212Z,1528901086.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:46.571Z,1528901086.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:46.598Z,1528901086.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:46.971Z,1528901086.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:46.999Z,1528901086.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:47.372Z,1528901087.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:47.405Z,1528901087.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:47.767Z,1528901087.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:47.804Z,1528901087.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:48.188Z,1528901088.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:48.214Z,1528901088.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:48.587Z,1528901088.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:48.620Z,1528901088.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:48.984Z,1528901088.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:49.002Z,1528901089.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:49.368Z,1528901089.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:49.405Z,1528901089.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:49.768Z,1528901089.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:49.813Z,1528901089.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:50.167Z,1528901090.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:50.207Z,1528901090.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:50.572Z,1528901090.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:50.602Z,1528901090.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:50.971Z,1528901090.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:51.006Z,1528901091.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:51.382Z,1528901091.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:51.421Z,1528901091.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:51.786Z,1528901091.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:51.815Z,1528901091.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:52.186Z,1528901092.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:52.217Z,1528901092.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:52.571Z,1528901092.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:52.589Z,1528901092.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:52.976Z,1528901092.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:52.994Z,1528901092.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:53.374Z,1528901093.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:53.392Z,1528901093.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:53.770Z,1528901093.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:53.788Z,1528901093.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:54.185Z,1528901094.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:54.221Z,1528901094.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:54.585Z,1528901094.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:54.603Z,1528901094.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:54.982Z,1528901094.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:55.001Z,1528901095.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:55.376Z,1528901095.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:55.393Z,1528901095.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:55.776Z,1528901095.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:55.794Z,1528901095.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:56.171Z,1528901096.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:56.193Z,1528901096.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:56.576Z,1528901096.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:56.594Z,1528901096.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:56.976Z,1528901096.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:56.994Z,1528901096.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:57.378Z,1528901097.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:57.401Z,1528901097.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:57.785Z,1528901097.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:57.804Z,1528901097.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:58.185Z,1528901098.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:58.203Z,1528901098.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:58.571Z,1528901098.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:58.606Z,1528901098.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:58.977Z,1528901098.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:58.994Z,1528901098.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:59.378Z,1528901099.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:59.395Z,1528901099.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:44:59.771Z,1528901099.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:44:59.799Z,1528901099.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:00.182Z,1528901100.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:00.205Z,1528901100.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:00.583Z,1528901100.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:00.604Z,1528901100.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:00.982Z,1528901100.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:01.004Z,1528901101.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:01.375Z,1528901101.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:01.398Z,1528901101.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:01.778Z,1528901101.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:01.795Z,1528901101.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:02.171Z,1528901102.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:02.194Z,1528901102.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:02.576Z,1528901102.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:02.605Z,1528901102.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:02.978Z,1528901102.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:02.995Z,1528901102.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:03.383Z,1528901103.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:03.401Z,1528901103.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:03.785Z,1528901103.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:03.804Z,1528901103.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:04.183Z,1528901104.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:04.201Z,1528901104.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:04.581Z,1528901104.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:04.599Z,1528901104.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:04.975Z,1528901104.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:05.007Z,1528901105.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:05.379Z,1528901105.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:05.398Z,1528901105.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:05.778Z,1528901105.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:05.801Z,1528901105.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:06.183Z,1528901106.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:06.201Z,1528901106.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:06.586Z,1528901106.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:06.604Z,1528901106.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:06.983Z,1528901106.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:07.001Z,1528901107.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:07.375Z,1528901107.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:07.412Z,1528901107.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:07.777Z,1528901107.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:07.795Z,1528901107.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:08.170Z,1528901108.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:08.204Z,1528901108.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:08.577Z,1528901108.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:08.595Z,1528901108.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:08.978Z,1528901108.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:08.995Z,1528901108.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:12.097Z,1528901112.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:12.116Z,1528901112.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:12.281Z,1528901112.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:12.316Z,1528901112.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:12.681Z,1528901112.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:12.699Z,1528901112.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:13.056Z,1528901113.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:13.090Z,1528901113.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:13.456Z,1528901113.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:13.486Z,1528901113.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:13.851Z,1528901113.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:13.876Z,1528901113.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:14.266Z,1528901114.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:14.299Z,1528901114.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:14.670Z,1528901114.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:14.698Z,1528901114.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:15.070Z,1528901115.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:15.098Z,1528901115.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:15.455Z,1528901115.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:15.496Z,1528901115.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:15.859Z,1528901115.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:15.877Z,1528901115.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:16.258Z,1528901116.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:16.276Z,1528901116.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:16.659Z,1528901116.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:16.678Z,1528901116.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:17.058Z,1528901117.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:17.076Z,1528901117.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:17.469Z,1528901117.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:17.510Z,1528901117.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:17.869Z,1528901117.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:17.903Z,1528901117.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:18.270Z,1528901118.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:18.312Z,1528901118.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:18.661Z,1528901118.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:18.678Z,1528901118.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:19.060Z,1528901119.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:19.078Z,1528901119.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:19.461Z,1528901119.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:19.484Z,1528901119.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:19.860Z,1528901119.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:19.878Z,1528901119.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:20.266Z,1528901120.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:20.283Z,1528901120.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:20.669Z,1528901120.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:20.687Z,1528901120.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:21.066Z,1528901121.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:21.084Z,1528901121.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:21.461Z,1528901121.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:21.479Z,1528901121.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:21.860Z,1528901121.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:21.878Z,1528901121.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:22.265Z,1528901122.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:22.283Z,1528901122.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:22.662Z,1528901122.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:22.679Z,1528901122.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:23.059Z,1528901123.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:23.081Z,1528901123.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:23.469Z,1528901123.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:23.492Z,1528901123.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:23.869Z,1528901123.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:23.887Z,1528901123.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:24.267Z,1528901124.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:24.284Z,1528901124.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:24.662Z,1528901124.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:24.679Z,1528901124.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:25.061Z,1528901125.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:25.079Z,1528901125.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:25.464Z,1528901125.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:25.482Z,1528901125.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:25.859Z,1528901125.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:25.883Z,1528901125.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:26.266Z,1528901126.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:26.292Z,1528901126.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:26.670Z,1528901126.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:26.687Z,1528901126.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:27.070Z,1528901127.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:27.087Z,1528901127.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:27.461Z,1528901127.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:27.479Z,1528901127.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:27.859Z,1528901127.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:27.884Z,1528901127.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:28.262Z,1528901128.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:28.280Z,1528901128.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:28.661Z,1528901128.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:28.679Z,1528901128.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:29.059Z,1528901129.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:29.093Z,1528901129.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:29.471Z,1528901129.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:29.496Z,1528901129.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:29.870Z,1528901129.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:29.892Z,1528901129.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:30.270Z,1528901130.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:30.287Z,1528901130.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:30.662Z,1528901130.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:30.679Z,1528901130.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:31.059Z,1528901131.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:31.083Z,1528901131.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:31.459Z,1528901131.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:31.482Z,1528901131.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:31.859Z,1528901131.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:31.883Z,1528901131.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:32.270Z,1528901132.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:32.288Z,1528901132.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:32.670Z,1528901132.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:32.692Z,1528901132.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:33.072Z,1528901133.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:33.090Z,1528901133.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:33.461Z,1528901133.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:33.479Z,1528901133.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:33.859Z,1528901133.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:33.883Z,1528901133.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:34.262Z,1528901134.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:34.285Z,1528901134.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:34.654Z,1528901134.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:34.679Z,1528901134.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:35.065Z,1528901135.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:35.088Z,1528901135.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:35.470Z,1528901135.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:35.499Z,1528901135.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:35.872Z,1528901135.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:35.890Z,1528901135.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:36.270Z,1528901136.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:36.288Z,1528901136.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:36.662Z,1528901136.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:36.695Z,1528901136.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:37.055Z,1528901137.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:37.079Z,1528901137.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:37.460Z,1528901137.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:37.483Z,1528901137.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:37.859Z,1528901137.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:37.890Z,1528901137.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:38.272Z,1528901138.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:38.290Z,1528901138.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:38.675Z,1528901138.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:38.700Z,1528901138.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:39.076Z,1528901139.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:39.094Z,1528901139.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:39.451Z,1528901139.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:39.478Z,1528901139.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:39.855Z,1528901139.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:39.889Z,1528901139.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:40.255Z,1528901140.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:40.290Z,1528901140.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:40.657Z,1528901140.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:40.685Z,1528901140.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:41.055Z,1528901141.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:41.082Z,1528901141.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:41.476Z,1528901141.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:41.494Z,1528901141.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:41.875Z,1528901141.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:41.893Z,1528901141.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:42.271Z,1528901142.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:42.289Z,1528901142.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:42.655Z,1528901142.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:42.684Z,1528901142.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:43.055Z,1528901143.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:43.082Z,1528901143.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:43.456Z,1528901143.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:43.485Z,1528901143.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:43.855Z,1528901143.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:43.883Z,1528901143.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:44.271Z,1528901144.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:44.289Z,1528901144.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:44.675Z,1528901144.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:44.693Z,1528901144.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:45.077Z,1528901145.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:45.095Z,1528901145.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:45.455Z,1528901145.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:45.492Z,1528901145.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:45.855Z,1528901145.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:45.888Z,1528901145.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:46.255Z,1528901146.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:46.285Z,1528901146.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:46.652Z,1528901146.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:46.687Z,1528901146.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:47.055Z,1528901147.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:47.082Z,1528901147.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:47.476Z,1528901147.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:47.495Z,1528901147.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:47.875Z,1528901147.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:47.893Z,1528901147.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:48.276Z,1528901148.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:48.300Z,1528901148.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:48.655Z,1528901148.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:48.690Z,1528901148.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:49.051Z,1528901149.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:49.084Z,1528901149.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:49.456Z,1528901149.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:49.493Z,1528901149.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:49.855Z,1528901149.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:49.896Z,1528901149.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:50.262Z,1528901150.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:50.295Z,1528901150.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:50.669Z,1528901150.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:50.700Z,1528901150.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:51.069Z,1528901151.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:51.108Z,1528901151.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:51.459Z,1528901151.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:51.495Z,1528901151.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:51.855Z,1528901151.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:51.889Z,1528901151.889 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:51.889Z,1528901151.889 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 226
2018-06-13T14:45:51.889Z,1528901151.889 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:45:51.891Z,1528901151.891 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:51.891Z,1528901151.891 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 226
2018-06-13T14:45:51.891Z,1528901151.891 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:45:51.893Z,1528901151.893 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:51.893Z,1528901151.893 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 226
2018-06-13T14:45:51.894Z,1528901151.894 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:45:51.981Z,1528901151.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:45:51.981Z,1528901151.981 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:45:51.981Z,1528901151.981 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:45:52.259Z,1528901152.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:52.385Z,1528901152.385 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:45:52.385Z,1528901152.385 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 226
2018-06-13T14:45:52.386Z,1528901152.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:45:52.386Z,1528901152.386 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 226
2018-06-13T14:45:52.386Z,1528901152.386 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:45:52.386Z,1528901152.386 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 226
2018-06-13T14:45:52.659Z,1528901152.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:52.676Z,1528901152.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:45:52.676Z,1528901152.676 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:45:52.676Z,1528901152.676 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:45:52.685Z,1528901152.685 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:45:52.686Z,1528901152.686 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:45:52.686Z,1528901152.686 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:45:52.686Z,1528901152.686 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:45:52.687Z,1528901152.687 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:45:52.687Z,1528901152.687 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:45:53.059Z,1528901153.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:53.076Z,1528901153.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:45:53.078Z,1528901153.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:53.470Z,1528901153.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:53.507Z,1528901153.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:45:53.508Z,1528901153.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:53.870Z,1528901153.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:53.903Z,1528901153.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:45:53.904Z,1528901153.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:54.270Z,1528901154.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:54.288Z,1528901154.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:45:54.305Z,1528901154.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:54.662Z,1528901154.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:54.680Z,1528901154.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:45:54.681Z,1528901154.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:55.060Z,1528901155.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:55.090Z,1528901155.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:45:55.091Z,1528901155.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:55.459Z,1528901155.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:55.489Z,1528901155.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:45:55.490Z,1528901155.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:55.859Z,1528901155.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:55.884Z,1528901155.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:45:55.886Z,1528901155.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:56.270Z,1528901156.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:56.288Z,1528901156.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:45:56.290Z,1528901156.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:56.670Z,1528901156.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:56.692Z,1528901156.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:45:56.693Z,1528901156.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:57.072Z,1528901157.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:57.090Z,1528901157.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:45:57.091Z,1528901157.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:57.461Z,1528901157.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:57.478Z,1528901157.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:45:57.479Z,1528901157.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:57.859Z,1528901157.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:57.882Z,1528901157.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:45:57.883Z,1528901157.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:58.262Z,1528901158.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:58.292Z,1528901158.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:45:58.293Z,1528901158.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:58.653Z,1528901158.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:58.678Z,1528901158.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:45:58.679Z,1528901158.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:59.059Z,1528901159.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:59.081Z,1528901159.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:45:59.082Z,1528901159.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:59.471Z,1528901159.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:59.488Z,1528901159.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:45:59.490Z,1528901159.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:45:59.871Z,1528901159.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:45:59.888Z,1528901159.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:45:59.889Z,1528901159.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:00.271Z,1528901160.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:00.288Z,1528901160.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:46:00.289Z,1528901160.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:00.662Z,1528901160.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:00.679Z,1528901160.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:46:00.680Z,1528901160.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:01.055Z,1528901161.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:01.078Z,1528901161.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:46:01.079Z,1528901161.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:01.462Z,1528901161.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:01.479Z,1528901161.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:46:01.480Z,1528901161.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:01.860Z,1528901161.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:01.896Z,1528901161.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:46:01.901Z,1528901161.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:02.271Z,1528901162.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:02.288Z,1528901162.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:46:02.289Z,1528901162.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:02.675Z,1528901162.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:02.692Z,1528901162.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:46:02.693Z,1528901162.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:03.074Z,1528901163.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:03.092Z,1528901163.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:46:03.093Z,1528901163.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:03.451Z,1528901163.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:03.487Z,1528901163.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:46:03.487Z,1528901163.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:03.859Z,1528901163.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:03.882Z,1528901163.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:46:03.883Z,1528901163.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:04.262Z,1528901164.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:04.284Z,1528901164.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:46:04.285Z,1528901164.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:04.665Z,1528901164.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:04.682Z,1528901164.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:46:04.683Z,1528901164.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:05.059Z,1528901165.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:05.088Z,1528901165.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:46:05.093Z,1528901165.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:05.475Z,1528901165.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:05.492Z,1528901165.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:46:05.493Z,1528901165.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:05.875Z,1528901165.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:05.892Z,1528901165.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:46:05.894Z,1528901165.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:06.271Z,1528901166.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:06.289Z,1528901166.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:46:06.290Z,1528901166.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:06.656Z,1528901166.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:06.694Z,1528901166.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:46:06.695Z,1528901166.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:07.055Z,1528901167.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:07.081Z,1528901167.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:46:07.082Z,1528901167.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:07.456Z,1528901167.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:07.482Z,1528901167.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:46:07.483Z,1528901167.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:07.855Z,1528901167.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:07.883Z,1528901167.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:46:07.884Z,1528901167.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:08.272Z,1528901168.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:08.290Z,1528901168.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:46:08.291Z,1528901168.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:08.676Z,1528901168.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:08.694Z,1528901168.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:46:08.695Z,1528901168.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:08.698Z,1528901168.698 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T14:46:08.698Z,1528901168.698 [Default:CheckIn:C.Wait] Stopped
2018-06-13T14:46:08.698Z,1528901168.698 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T14:46:08.698Z,1528901168.698 [Default:CheckIn:D] Running Loop=1
2018-06-13T14:46:09.076Z,1528901169.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:09.100Z,1528901169.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:46:09.101Z,1528901169.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:09.104Z,1528901169.104 [Default:CheckIn:D] Stopped
2018-06-13T14:46:09.104Z,1528901169.104 [Default:CheckIn:E] Running Loop=1
2018-06-13T14:46:12.169Z,1528901172.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:12.187Z,1528901172.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:12.190Z,1528901172.190 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 678.927669 min 
2018-06-13T14:46:12.191Z,1528901172.191 [Default:CheckIn:E] Stopped
2018-06-13T14:46:12.191Z,1528901172.191 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T14:46:12.191Z,1528901172.191 [Default:CheckIn] Stopped
2018-06-13T14:46:12.191Z,1528901172.191 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T14:46:12.191Z,1528901172.191 [Default:CheckIn](INFO): Running loop #66
2018-06-13T14:46:12.191Z,1528901172.191 [Default:CheckIn] Running Loop=66
2018-06-13T14:46:12.191Z,1528901172.191 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T14:46:12.191Z,1528901172.191 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T14:46:12.302Z,1528901172.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:12.392Z,1528901172.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:12.729Z,1528901172.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:12.747Z,1528901172.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:13.124Z,1528901173.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:13.142Z,1528901173.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:13.530Z,1528901173.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:13.548Z,1528901173.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:13.904Z,1528901173.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:13.944Z,1528901173.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:14.307Z,1528901174.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:14.324Z,1528901174.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:14.707Z,1528901174.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:14.732Z,1528901174.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:15.106Z,1528901175.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:15.128Z,1528901175.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:15.509Z,1528901175.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:15.528Z,1528901175.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:15.917Z,1528901175.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:15.951Z,1528901175.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:16.317Z,1528901176.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:16.335Z,1528901176.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:16.711Z,1528901176.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:16.730Z,1528901176.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:17.108Z,1528901177.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:17.140Z,1528901177.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:17.508Z,1528901177.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:17.539Z,1528901177.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:17.903Z,1528901177.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:17.928Z,1528901177.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:18.318Z,1528901178.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:18.340Z,1528901178.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:18.719Z,1528901178.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:18.737Z,1528901178.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:19.116Z,1528901179.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:19.134Z,1528901179.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:19.510Z,1528901179.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:19.532Z,1528901179.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:19.910Z,1528901179.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:19.928Z,1528901179.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:20.303Z,1528901180.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:20.327Z,1528901180.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:20.707Z,1528901180.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:20.731Z,1528901180.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:21.107Z,1528901181.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:21.132Z,1528901181.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:21.519Z,1528901181.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:21.538Z,1528901181.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:21.918Z,1528901181.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:21.941Z,1528901181.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:22.319Z,1528901182.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:22.337Z,1528901182.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:22.703Z,1528901182.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:22.726Z,1528901182.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:23.107Z,1528901183.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:23.133Z,1528901183.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:23.510Z,1528901183.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:23.528Z,1528901183.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:23.909Z,1528901183.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:23.927Z,1528901183.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:24.319Z,1528901184.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:24.337Z,1528901184.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:24.723Z,1528901184.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:24.748Z,1528901184.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:25.115Z,1528901185.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:25.133Z,1528901185.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:25.509Z,1528901185.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:25.526Z,1528901185.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:25.899Z,1528901185.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:25.936Z,1528901185.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:26.309Z,1528901186.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:26.332Z,1528901186.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:26.707Z,1528901186.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:26.731Z,1528901186.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:27.107Z,1528901187.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:27.132Z,1528901187.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:27.515Z,1528901187.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:27.533Z,1528901187.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:27.922Z,1528901187.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:27.944Z,1528901187.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:28.323Z,1528901188.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:28.342Z,1528901188.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:28.709Z,1528901188.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:28.727Z,1528901188.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:29.105Z,1528901189.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:29.130Z,1528901189.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:29.510Z,1528901189.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:29.529Z,1528901189.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:29.909Z,1528901189.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:29.926Z,1528901189.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:30.318Z,1528901190.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:30.336Z,1528901190.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:30.723Z,1528901190.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:30.748Z,1528901190.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:31.116Z,1528901191.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:31.134Z,1528901191.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:31.499Z,1528901191.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:31.540Z,1528901191.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:31.910Z,1528901191.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:31.933Z,1528901191.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:32.299Z,1528901192.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:32.335Z,1528901192.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:32.707Z,1528901192.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:32.737Z,1528901192.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:33.103Z,1528901193.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:33.146Z,1528901193.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:33.515Z,1528901193.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:33.534Z,1528901193.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:33.924Z,1528901193.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:33.948Z,1528901193.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:34.324Z,1528901194.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:34.342Z,1528901194.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:34.699Z,1528901194.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:34.726Z,1528901194.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:35.113Z,1528901195.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:35.131Z,1528901195.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:35.504Z,1528901195.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:35.535Z,1528901195.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:35.904Z,1528901195.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:35.932Z,1528901195.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:36.321Z,1528901196.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:36.344Z,1528901196.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:36.722Z,1528901196.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:36.758Z,1528901196.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:37.121Z,1528901197.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:37.144Z,1528901197.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:37.503Z,1528901197.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:37.531Z,1528901197.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:37.903Z,1528901197.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:37.939Z,1528901197.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:38.303Z,1528901198.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:38.335Z,1528901198.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:38.704Z,1528901198.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:38.738Z,1528901198.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:39.103Z,1528901199.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:39.141Z,1528901199.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:39.509Z,1528901199.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:39.537Z,1528901199.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:39.923Z,1528901199.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:39.942Z,1528901199.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:40.324Z,1528901200.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:40.343Z,1528901200.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:40.699Z,1528901200.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:40.728Z,1528901200.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:41.103Z,1528901201.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:41.136Z,1528901201.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:41.504Z,1528901201.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:41.538Z,1528901201.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:41.903Z,1528901201.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:41.920Z,1528901201.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:42.317Z,1528901202.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:42.352Z,1528901202.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:42.722Z,1528901202.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:42.751Z,1528901202.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:43.117Z,1528901203.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:43.155Z,1528901203.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:43.507Z,1528901203.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:43.524Z,1528901203.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:43.906Z,1528901203.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:43.924Z,1528901203.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:44.302Z,1528901204.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:44.319Z,1528901204.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:44.706Z,1528901204.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:44.728Z,1528901204.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:45.106Z,1528901205.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:45.124Z,1528901205.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:45.517Z,1528901205.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:45.551Z,1528901205.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:45.917Z,1528901205.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:45.935Z,1528901205.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:46.318Z,1528901206.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:46.335Z,1528901206.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:46.703Z,1528901206.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:46.725Z,1528901206.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:47.107Z,1528901207.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:47.124Z,1528901207.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:47.508Z,1528901207.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:47.534Z,1528901207.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:47.902Z,1528901207.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:47.931Z,1528901207.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:48.313Z,1528901208.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:48.331Z,1528901208.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:48.717Z,1528901208.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:48.735Z,1528901208.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:49.114Z,1528901209.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:49.132Z,1528901209.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:49.508Z,1528901209.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:49.526Z,1528901209.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:49.909Z,1528901209.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:49.927Z,1528901209.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:50.310Z,1528901210.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:50.327Z,1528901210.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:50.702Z,1528901210.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:50.732Z,1528901210.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:51.109Z,1528901211.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:51.127Z,1528901211.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:51.510Z,1528901211.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:51.532Z,1528901211.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:51.917Z,1528901211.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:51.935Z,1528901211.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:52.318Z,1528901212.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:52.336Z,1528901212.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:52.708Z,1528901212.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:52.726Z,1528901212.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:53.109Z,1528901213.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:53.127Z,1528901213.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:53.510Z,1528901213.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:53.528Z,1528901213.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:53.903Z,1528901213.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:53.937Z,1528901213.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:54.315Z,1528901214.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:54.334Z,1528901214.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:54.719Z,1528901214.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:54.737Z,1528901214.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:55.119Z,1528901215.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:55.137Z,1528901215.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:55.514Z,1528901215.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:55.536Z,1528901215.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:55.907Z,1528901215.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:55.932Z,1528901215.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:56.303Z,1528901216.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:56.328Z,1528901216.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:56.708Z,1528901216.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:56.742Z,1528901216.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:57.100Z,1528901217.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:57.136Z,1528901217.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:57.510Z,1528901217.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:57.544Z,1528901217.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:57.925Z,1528901217.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:57.943Z,1528901217.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:58.321Z,1528901218.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:58.339Z,1528901218.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:58.699Z,1528901218.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:58.736Z,1528901218.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:59.103Z,1528901219.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:59.136Z,1528901219.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:59.503Z,1528901219.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:59.537Z,1528901219.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:46:59.903Z,1528901219.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:46:59.920Z,1528901219.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:00.286Z,1528901220.286 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T14:47:00.287Z,1528901220.287 [NAL9602] Data Fault, FailCount= 2
2018-06-13T14:47:00.287Z,1528901220.287 [NAL9602](ERROR): Data Fault
2018-06-13T14:47:00.304Z,1528901220.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:00.321Z,1528901220.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:00.421Z,1528901220.421 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T14:47:00.685Z,1528901220.685 [NAL9602](INFO): Powering down
2018-06-13T14:47:00.703Z,1528901220.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:00.724Z,1528901220.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:01.103Z,1528901221.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:01.121Z,1528901221.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:01.505Z,1528901221.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:01.522Z,1528901221.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:01.601Z,1528901221.601 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T14:47:01.601Z,1528901221.601 [NAL9602] No Fault, FailCount= 2
2018-06-13T14:47:01.904Z,1528901221.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:01.928Z,1528901221.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:02.304Z,1528901222.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:02.322Z,1528901222.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:02.705Z,1528901222.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:02.722Z,1528901222.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:03.103Z,1528901223.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:03.128Z,1528901223.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:03.505Z,1528901223.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:03.523Z,1528901223.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:03.905Z,1528901223.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:03.923Z,1528901223.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:04.303Z,1528901224.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:04.328Z,1528901224.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:04.706Z,1528901224.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:04.723Z,1528901224.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:05.105Z,1528901225.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:05.122Z,1528901225.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:05.503Z,1528901225.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:05.521Z,1528901225.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:05.903Z,1528901225.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:05.921Z,1528901225.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:06.305Z,1528901226.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:06.323Z,1528901226.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:06.704Z,1528901226.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:06.722Z,1528901226.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:07.103Z,1528901227.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:07.121Z,1528901227.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:07.505Z,1528901227.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:07.522Z,1528901227.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:07.903Z,1528901227.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:07.920Z,1528901227.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:08.305Z,1528901228.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:08.323Z,1528901228.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:08.710Z,1528901228.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:08.727Z,1528901228.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:09.105Z,1528901229.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:09.122Z,1528901229.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:12.217Z,1528901232.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:12.236Z,1528901232.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:12.374Z,1528901232.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:12.412Z,1528901232.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:12.770Z,1528901232.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:12.828Z,1528901232.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:13.170Z,1528901233.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:13.188Z,1528901233.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:13.570Z,1528901233.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:13.588Z,1528901233.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:13.967Z,1528901233.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:13.984Z,1528901233.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:14.367Z,1528901234.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:14.384Z,1528901234.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:14.771Z,1528901234.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:14.789Z,1528901234.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:15.169Z,1528901235.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:15.192Z,1528901235.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:15.570Z,1528901235.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:15.588Z,1528901235.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:15.970Z,1528901235.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:15.987Z,1528901235.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:16.366Z,1528901236.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:16.389Z,1528901236.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:16.770Z,1528901236.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:16.788Z,1528901236.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:17.170Z,1528901237.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:17.187Z,1528901237.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:17.570Z,1528901237.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:17.588Z,1528901237.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:17.970Z,1528901237.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:17.988Z,1528901237.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:18.370Z,1528901238.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:18.417Z,1528901238.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:18.766Z,1528901238.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:18.821Z,1528901238.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:19.170Z,1528901239.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:19.188Z,1528901239.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:19.570Z,1528901239.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:19.588Z,1528901239.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:19.970Z,1528901239.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:19.987Z,1528901239.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:20.370Z,1528901240.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:20.388Z,1528901240.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:20.771Z,1528901240.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:20.788Z,1528901240.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:21.166Z,1528901241.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:21.184Z,1528901241.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:21.571Z,1528901241.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:21.589Z,1528901241.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:21.970Z,1528901241.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:21.987Z,1528901241.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:22.370Z,1528901242.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:22.388Z,1528901242.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:22.770Z,1528901242.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:22.788Z,1528901242.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:23.170Z,1528901243.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:23.187Z,1528901243.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:23.565Z,1528901243.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:23.584Z,1528901243.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:23.970Z,1528901243.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:23.988Z,1528901243.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:24.370Z,1528901244.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:24.388Z,1528901244.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:24.765Z,1528901244.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:24.833Z,1528901244.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:25.171Z,1528901245.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:25.224Z,1528901245.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:25.571Z,1528901245.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:25.589Z,1528901245.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:25.968Z,1528901245.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:25.985Z,1528901245.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:26.373Z,1528901246.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:26.391Z,1528901246.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:26.771Z,1528901246.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:26.789Z,1528901246.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:27.172Z,1528901247.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:27.190Z,1528901247.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:27.571Z,1528901247.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:27.593Z,1528901247.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:27.971Z,1528901247.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:27.989Z,1528901247.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:28.369Z,1528901248.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:28.386Z,1528901248.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:28.771Z,1528901248.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:28.793Z,1528901248.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:29.171Z,1528901249.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:29.200Z,1528901249.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:29.572Z,1528901249.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:29.590Z,1528901249.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:29.971Z,1528901249.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:29.990Z,1528901249.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:30.371Z,1528901250.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:30.390Z,1528901250.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:30.746Z,1528901250.746 [NAL9602](INFO): Powering up NAL9602
2018-06-13T14:47:30.773Z,1528901250.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:30.791Z,1528901250.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:31.171Z,1528901251.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:31.194Z,1528901251.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:31.571Z,1528901251.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:31.593Z,1528901251.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:31.968Z,1528901251.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:31.992Z,1528901251.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:32.371Z,1528901252.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:32.394Z,1528901252.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:32.766Z,1528901252.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:32.796Z,1528901252.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:33.172Z,1528901253.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:33.200Z,1528901253.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:33.571Z,1528901253.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:33.593Z,1528901253.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:33.971Z,1528901253.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:33.994Z,1528901253.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:34.368Z,1528901254.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:34.392Z,1528901254.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:34.771Z,1528901254.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:34.793Z,1528901254.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:35.171Z,1528901255.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:35.200Z,1528901255.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:35.566Z,1528901255.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:35.598Z,1528901255.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:35.973Z,1528901255.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:35.991Z,1528901255.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:36.371Z,1528901256.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:36.394Z,1528901256.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:36.773Z,1528901256.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:36.790Z,1528901256.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:37.172Z,1528901257.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:37.198Z,1528901257.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:37.563Z,1528901257.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:37.620Z,1528901257.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:37.963Z,1528901257.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:38.003Z,1528901258.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:38.367Z,1528901258.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:38.400Z,1528901258.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:38.767Z,1528901258.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:38.799Z,1528901258.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:39.166Z,1528901259.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:39.200Z,1528901259.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:39.567Z,1528901259.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:39.599Z,1528901259.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:39.968Z,1528901259.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:39.000Z,1528901260.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:40.366Z,1528901260.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:40.400Z,1528901260.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:40.763Z,1528901260.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:40.804Z,1528901260.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:41.171Z,1528901261.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:41.198Z,1528901261.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:41.588Z,1528901261.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:41.605Z,1528901261.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:41.950Z,1528901261.950 [NAL9602](INFO): NAL9602 initialized
2018-06-13T14:47:41.967Z,1528901261.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:42.010Z,1528901262.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:42.367Z,1528901262.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:42.394Z,1528901262.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:42.785Z,1528901262.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:42.816Z,1528901262.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:43.182Z,1528901263.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:43.209Z,1528901263.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:43.578Z,1528901263.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:43.611Z,1528901263.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:43.967Z,1528901263.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:43.987Z,1528901263.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:44.371Z,1528901264.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:44.390Z,1528901264.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:44.771Z,1528901264.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:44.790Z,1528901264.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:45.170Z,1528901265.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:45.189Z,1528901265.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:45.582Z,1528901265.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:45.616Z,1528901265.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:45.981Z,1528901265.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:45.000Z,1528901266.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:46.385Z,1528901266.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:46.428Z,1528901266.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:46.767Z,1528901266.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:46.795Z,1528901266.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:47.172Z,1528901267.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:47.190Z,1528901267.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:47.574Z,1528901267.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:47.592Z,1528901267.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:47.973Z,1528901267.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:47.991Z,1528901267.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:48.372Z,1528901268.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:48.391Z,1528901268.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:48.781Z,1528901268.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:48.801Z,1528901268.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:49.182Z,1528901269.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:49.199Z,1528901269.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:49.582Z,1528901269.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:49.599Z,1528901269.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:49.972Z,1528901269.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:50.017Z,1528901270.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:50.373Z,1528901270.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:50.440Z,1528901270.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:50.769Z,1528901270.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:50.829Z,1528901270.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:51.174Z,1528901271.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:51.197Z,1528901271.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:51.584Z,1528901271.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:51.602Z,1528901271.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:51.986Z,1528901271.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:52.003Z,1528901272.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:52.386Z,1528901272.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:52.412Z,1528901272.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:52.767Z,1528901272.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:52.805Z,1528901272.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:53.167Z,1528901273.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:53.208Z,1528901273.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:53.567Z,1528901273.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:53.603Z,1528901273.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:53.967Z,1528901273.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:54.003Z,1528901274.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:54.371Z,1528901274.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:54.404Z,1528901274.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:54.788Z,1528901274.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:54.807Z,1528901274.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:55.177Z,1528901275.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:55.211Z,1528901275.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:55.577Z,1528901275.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:55.612Z,1528901275.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:55.967Z,1528901275.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:55.998Z,1528901275.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:56.368Z,1528901276.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:56.402Z,1528901276.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:56.768Z,1528901276.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:56.785Z,1528901276.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:57.170Z,1528901277.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:57.188Z,1528901277.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:57.577Z,1528901277.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:57.611Z,1528901277.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:57.985Z,1528901277.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:58.018Z,1528901278.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:58.382Z,1528901278.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:58.421Z,1528901278.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:58.775Z,1528901278.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:58.792Z,1528901278.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:59.171Z,1528901279.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:59.189Z,1528901279.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:59.571Z,1528901279.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:59.589Z,1528901279.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:47:59.974Z,1528901279.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:47:59.992Z,1528901279.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:00.366Z,1528901280.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:00.409Z,1528901280.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:00.782Z,1528901280.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:00.821Z,1528901280.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:01.182Z,1528901281.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:01.200Z,1528901281.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:01.578Z,1528901281.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:01.596Z,1528901281.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:01.974Z,1528901281.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:01.993Z,1528901281.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:02.372Z,1528901282.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:02.391Z,1528901282.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:02.772Z,1528901282.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:02.797Z,1528901282.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:03.174Z,1528901283.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:03.235Z,1528901283.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:03.578Z,1528901283.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:03.628Z,1528901283.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:03.981Z,1528901283.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:03.000Z,1528901284.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:04.382Z,1528901284.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:04.400Z,1528901284.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:04.767Z,1528901284.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:04.790Z,1528901284.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:05.171Z,1528901285.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:05.194Z,1528901285.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:05.574Z,1528901285.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:05.592Z,1528901285.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:05.974Z,1528901285.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:05.992Z,1528901285.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:06.371Z,1528901286.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:06.394Z,1528901286.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:06.782Z,1528901286.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:06.800Z,1528901286.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:07.178Z,1528901287.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:07.200Z,1528901287.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:07.578Z,1528901287.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:07.596Z,1528901287.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:07.972Z,1528901287.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:08.002Z,1528901288.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:08.367Z,1528901288.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:08.394Z,1528901288.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:08.778Z,1528901288.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:08.800Z,1528901288.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:09.178Z,1528901289.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:09.196Z,1528901289.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:12.314Z,1528901292.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:12.344Z,1528901292.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:12.484Z,1528901292.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:12.534Z,1528901292.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:12.880Z,1528901292.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:12.899Z,1528901292.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:13.257Z,1528901293.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:13.296Z,1528901293.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:13.656Z,1528901293.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:13.699Z,1528901293.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:14.056Z,1528901294.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:14.082Z,1528901294.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:14.462Z,1528901294.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:14.499Z,1528901294.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:14.873Z,1528901294.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:14.906Z,1528901294.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:15.274Z,1528901295.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:15.308Z,1528901295.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:15.659Z,1528901295.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:15.684Z,1528901295.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:16.062Z,1528901296.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:16.080Z,1528901296.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:16.469Z,1528901296.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:16.487Z,1528901296.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:16.866Z,1528901296.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:16.883Z,1528901296.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:17.266Z,1528901297.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:17.283Z,1528901297.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:17.662Z,1528901297.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:17.680Z,1528901297.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:18.055Z,1528901298.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:18.088Z,1528901298.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:18.466Z,1528901298.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:18.484Z,1528901298.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:18.869Z,1528901298.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:18.887Z,1528901298.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:19.266Z,1528901299.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:19.284Z,1528901299.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:19.661Z,1528901299.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:19.679Z,1528901299.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:20.062Z,1528901300.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:20.080Z,1528901300.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:20.466Z,1528901300.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:20.484Z,1528901300.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:20.869Z,1528901300.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:20.887Z,1528901300.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:21.269Z,1528901301.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:21.287Z,1528901301.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:21.658Z,1528901301.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:21.676Z,1528901301.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:22.060Z,1528901302.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:22.079Z,1528901302.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:22.470Z,1528901302.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:22.492Z,1528901302.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:22.867Z,1528901302.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:22.892Z,1528901302.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:23.266Z,1528901303.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:23.292Z,1528901303.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:23.663Z,1528901303.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:23.681Z,1528901303.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:24.061Z,1528901304.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:24.079Z,1528901304.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:24.466Z,1528901304.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:24.488Z,1528901304.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:24.870Z,1528901304.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:24.888Z,1528901304.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:25.267Z,1528901305.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:25.292Z,1528901305.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:25.662Z,1528901305.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:25.680Z,1528901305.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:26.062Z,1528901306.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:26.080Z,1528901306.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:26.468Z,1528901306.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:26.512Z,1528901306.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:26.870Z,1528901306.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:26.923Z,1528901306.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:27.269Z,1528901307.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:27.292Z,1528901307.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:27.663Z,1528901307.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:27.681Z,1528901307.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:28.061Z,1528901308.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:28.078Z,1528901308.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:28.470Z,1528901308.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:28.488Z,1528901308.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:28.867Z,1528901308.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:28.893Z,1528901308.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:29.269Z,1528901309.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:29.292Z,1528901309.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:29.663Z,1528901309.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:29.702Z,1528901309.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:30.055Z,1528901310.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:30.080Z,1528901310.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:30.470Z,1528901310.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:30.488Z,1528901310.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:30.871Z,1528901310.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:30.896Z,1528901310.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:31.271Z,1528901311.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:31.289Z,1528901311.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:31.661Z,1528901311.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:31.681Z,1528901311.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:32.059Z,1528901312.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:32.085Z,1528901312.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:32.467Z,1528901312.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:32.486Z,1528901312.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:32.870Z,1528901312.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:32.888Z,1528901312.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:33.271Z,1528901313.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:33.290Z,1528901313.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:33.661Z,1528901313.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:33.679Z,1528901313.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:34.059Z,1528901314.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:34.083Z,1528901314.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:34.460Z,1528901314.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:34.491Z,1528901314.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:34.867Z,1528901314.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:34.885Z,1528901314.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:35.274Z,1528901315.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:35.291Z,1528901315.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:35.674Z,1528901315.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:35.693Z,1528901315.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:36.061Z,1528901316.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:36.079Z,1528901316.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:36.459Z,1528901316.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:36.483Z,1528901316.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:36.862Z,1528901316.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:36.881Z,1528901316.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:37.251Z,1528901317.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:37.286Z,1528901317.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:37.671Z,1528901317.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:37.689Z,1528901317.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:38.075Z,1528901318.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:38.099Z,1528901318.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:38.467Z,1528901318.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:38.504Z,1528901318.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:38.855Z,1528901318.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:38.891Z,1528901318.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:39.266Z,1528901319.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:39.284Z,1528901319.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:39.655Z,1528901319.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:39.682Z,1528901319.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:40.056Z,1528901320.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:40.091Z,1528901320.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:40.455Z,1528901320.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:40.498Z,1528901320.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:40.872Z,1528901320.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:40.889Z,1528901320.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:41.274Z,1528901321.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:41.304Z,1528901321.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:41.674Z,1528901321.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:41.706Z,1528901321.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:42.055Z,1528901322.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:42.088Z,1528901322.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:42.455Z,1528901322.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:42.482Z,1528901322.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:42.856Z,1528901322.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:42.892Z,1528901322.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:43.251Z,1528901323.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:43.287Z,1528901323.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:43.671Z,1528901323.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:43.689Z,1528901323.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:44.076Z,1528901324.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:44.095Z,1528901324.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:44.472Z,1528901324.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:44.490Z,1528901324.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:44.855Z,1528901324.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:44.882Z,1528901324.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:45.255Z,1528901325.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:45.286Z,1528901325.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:45.655Z,1528901325.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:45.683Z,1528901325.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:46.057Z,1528901326.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:46.085Z,1528901326.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:46.455Z,1528901326.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:46.484Z,1528901326.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:46.876Z,1528901326.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:46.894Z,1528901326.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:47.274Z,1528901327.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:47.305Z,1528901327.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:47.674Z,1528901327.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:47.707Z,1528901327.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:48.051Z,1528901328.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:48.088Z,1528901328.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:48.455Z,1528901328.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:48.483Z,1528901328.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:48.856Z,1528901328.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:48.891Z,1528901328.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:49.255Z,1528901329.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:49.293Z,1528901329.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:49.662Z,1528901329.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:49.708Z,1528901329.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:50.074Z,1528901330.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:50.108Z,1528901330.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:50.466Z,1528901330.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:50.504Z,1528901330.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:50.859Z,1528901330.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:50.896Z,1528901330.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:51.255Z,1528901331.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:51.290Z,1528901331.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:51.655Z,1528901331.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:51.700Z,1528901331.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:52.060Z,1528901332.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:52.078Z,1528901332.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:52.458Z,1528901332.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:52.476Z,1528901332.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:52.866Z,1528901332.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:52.884Z,1528901332.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:52.884Z,1528901332.884 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 227
2018-06-13T14:48:52.901Z,1528901332.901 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:48:52.902Z,1528901332.902 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:52.903Z,1528901332.903 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 227
2018-06-13T14:48:52.903Z,1528901332.903 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:48:52.904Z,1528901332.904 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:52.904Z,1528901332.904 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 227
2018-06-13T14:48:52.905Z,1528901332.905 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:48:52.985Z,1528901332.985 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:48:52.985Z,1528901332.985 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:48:52.986Z,1528901332.986 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:48:53.270Z,1528901333.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:53.394Z,1528901333.394 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:48:53.395Z,1528901333.395 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 227
2018-06-13T14:48:53.395Z,1528901333.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:48:53.395Z,1528901333.395 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 227
2018-06-13T14:48:53.396Z,1528901333.396 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:48:53.396Z,1528901333.396 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 227
2018-06-13T14:48:53.666Z,1528901333.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:53.683Z,1528901333.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:48:53.683Z,1528901333.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:48:53.683Z,1528901333.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:48:53.684Z,1528901333.684 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:48:53.684Z,1528901333.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:48:53.684Z,1528901333.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:48:53.685Z,1528901333.685 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:48:53.685Z,1528901333.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:48:53.686Z,1528901333.686 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:48:54.051Z,1528901334.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:54.087Z,1528901334.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:48:54.087Z,1528901334.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:54.461Z,1528901334.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:54.484Z,1528901334.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:48:54.485Z,1528901334.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:54.859Z,1528901334.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:54.893Z,1528901334.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:48:54.894Z,1528901334.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:55.255Z,1528901335.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:55.287Z,1528901335.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:48:55.288Z,1528901335.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:55.672Z,1528901335.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:55.690Z,1528901335.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:48:55.691Z,1528901335.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:56.077Z,1528901336.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:56.094Z,1528901336.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:48:56.095Z,1528901336.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:56.462Z,1528901336.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:56.495Z,1528901336.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:48:56.496Z,1528901336.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:56.855Z,1528901336.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:56.892Z,1528901336.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:48:56.893Z,1528901336.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:57.255Z,1528901337.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:57.293Z,1528901337.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:48:57.294Z,1528901337.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:57.651Z,1528901337.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:57.689Z,1528901337.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:48:57.690Z,1528901337.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:58.056Z,1528901338.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:58.082Z,1528901338.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:48:58.082Z,1528901338.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:58.455Z,1528901338.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:58.485Z,1528901338.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:48:58.486Z,1528901338.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:58.861Z,1528901338.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:58.898Z,1528901338.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:48:58.899Z,1528901338.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:59.265Z,1528901339.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:59.306Z,1528901339.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:48:59.307Z,1528901339.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:48:59.670Z,1528901339.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:48:59.703Z,1528901339.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:48:59.704Z,1528901339.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:00.058Z,1528901340.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:00.076Z,1528901340.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:49:00.076Z,1528901340.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:00.458Z,1528901340.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:00.494Z,1528901340.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:49:00.495Z,1528901340.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:00.860Z,1528901340.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:00.911Z,1528901340.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:49:00.912Z,1528901340.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:01.254Z,1528901341.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:01.271Z,1528901341.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:49:01.272Z,1528901341.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:01.670Z,1528901341.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:01.705Z,1528901341.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:49:01.706Z,1528901341.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:02.070Z,1528901342.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:02.103Z,1528901342.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:49:02.104Z,1528901342.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:02.470Z,1528901342.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:02.487Z,1528901342.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:49:02.488Z,1528901342.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:02.860Z,1528901342.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:02.884Z,1528901342.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:49:02.885Z,1528901342.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:03.261Z,1528901343.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:03.279Z,1528901343.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:49:03.280Z,1528901343.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:03.655Z,1528901343.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:03.677Z,1528901343.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:49:03.678Z,1528901343.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:04.062Z,1528901344.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:04.079Z,1528901344.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:49:04.080Z,1528901344.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:04.462Z,1528901344.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:04.488Z,1528901344.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:49:04.489Z,1528901344.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:04.863Z,1528901344.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:04.888Z,1528901344.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:49:04.889Z,1528901344.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:05.269Z,1528901345.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:05.287Z,1528901345.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:49:05.288Z,1528901345.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:05.670Z,1528901345.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:05.687Z,1528901345.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:49:05.688Z,1528901345.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:06.055Z,1528901346.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:06.085Z,1528901346.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:49:06.086Z,1528901346.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:06.462Z,1528901346.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:06.488Z,1528901346.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:49:06.489Z,1528901346.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:06.863Z,1528901346.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:06.881Z,1528901346.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:49:06.882Z,1528901346.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:07.255Z,1528901347.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:07.279Z,1528901347.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:49:07.280Z,1528901347.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:07.670Z,1528901347.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:07.687Z,1528901347.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:49:07.688Z,1528901347.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:08.067Z,1528901348.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:08.085Z,1528901348.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:49:08.086Z,1528901348.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:08.467Z,1528901348.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:08.485Z,1528901348.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:49:08.486Z,1528901348.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:08.864Z,1528901348.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:08.882Z,1528901348.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:49:08.883Z,1528901348.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:09.264Z,1528901349.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:09.282Z,1528901349.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:49:09.283Z,1528901349.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:09.662Z,1528901349.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:09.680Z,1528901349.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:49:09.681Z,1528901349.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:10.062Z,1528901350.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:10.080Z,1528901350.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:49:10.081Z,1528901350.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:10.462Z,1528901350.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:10.480Z,1528901350.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:49:10.481Z,1528901350.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:10.866Z,1528901350.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:10.892Z,1528901350.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:49:10.909Z,1528901350.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:11.274Z,1528901351.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:11.316Z,1528901351.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:49:11.321Z,1528901351.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:11.670Z,1528901351.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:11.700Z,1528901351.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:49:11.717Z,1528901351.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:12.055Z,1528901352.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:12.117Z,1528901352.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:49:12.118Z,1528901352.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:12.464Z,1528901352.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:12.482Z,1528901352.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:49:12.483Z,1528901352.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:12.866Z,1528901352.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:12.883Z,1528901352.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T14:49:12.884Z,1528901352.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:15.967Z,1528901355.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:15.990Z,1528901355.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:16.119Z,1528901356.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:16.138Z,1528901356.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:16.515Z,1528901356.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:16.533Z,1528901356.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:16.915Z,1528901356.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:16.933Z,1528901356.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:17.295Z,1528901357.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:17.332Z,1528901357.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:17.695Z,1528901357.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:17.728Z,1528901357.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:18.096Z,1528901358.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:18.134Z,1528901358.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:18.495Z,1528901358.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:18.528Z,1528901358.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:18.909Z,1528901358.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:18.938Z,1528901358.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:19.309Z,1528901359.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:19.344Z,1528901359.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:19.705Z,1528901359.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:19.732Z,1528901359.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:20.095Z,1528901360.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:20.129Z,1528901360.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:20.491Z,1528901360.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:20.516Z,1528901360.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:20.900Z,1528901360.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:20.918Z,1528901360.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:21.298Z,1528901361.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:21.315Z,1528901361.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:21.709Z,1528901361.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:21.742Z,1528901361.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:22.110Z,1528901362.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:22.142Z,1528901362.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:22.509Z,1528901362.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:22.547Z,1528901362.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:22.898Z,1528901362.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:22.916Z,1528901362.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:23.302Z,1528901363.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:23.342Z,1528901363.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:23.697Z,1528901363.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:23.750Z,1528901363.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:24.098Z,1528901364.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:24.117Z,1528901364.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:24.498Z,1528901364.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:24.516Z,1528901364.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:24.909Z,1528901364.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:24.927Z,1528901364.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:25.309Z,1528901365.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:25.347Z,1528901365.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:25.706Z,1528901365.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:25.723Z,1528901365.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:26.100Z,1528901366.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:26.118Z,1528901366.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:26.499Z,1528901366.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:26.524Z,1528901366.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:26.900Z,1528901366.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:26.922Z,1528901366.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:27.301Z,1528901367.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:27.319Z,1528901367.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:27.707Z,1528901367.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:27.724Z,1528901367.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:28.109Z,1528901368.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:28.127Z,1528901368.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:28.507Z,1528901368.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:28.524Z,1528901368.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:28.902Z,1528901368.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:28.924Z,1528901368.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:29.299Z,1528901369.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:29.327Z,1528901369.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:29.702Z,1528901369.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:29.727Z,1528901369.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:30.102Z,1528901370.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:30.120Z,1528901370.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:30.505Z,1528901370.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:30.523Z,1528901370.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:30.909Z,1528901370.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:30.928Z,1528901370.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:31.309Z,1528901371.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:31.327Z,1528901371.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:31.710Z,1528901371.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:31.727Z,1528901371.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:32.102Z,1528901372.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:32.120Z,1528901372.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:32.504Z,1528901372.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:32.522Z,1528901372.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:32.899Z,1528901372.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:32.931Z,1528901372.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:33.302Z,1528901373.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:33.319Z,1528901373.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:33.711Z,1528901373.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:33.729Z,1528901373.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:34.110Z,1528901374.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:34.128Z,1528901374.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:34.509Z,1528901374.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:34.532Z,1528901374.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:34.901Z,1528901374.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:34.925Z,1528901374.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:35.299Z,1528901375.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:35.340Z,1528901375.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:35.699Z,1528901375.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:35.724Z,1528901375.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:36.102Z,1528901376.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:36.119Z,1528901376.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:36.505Z,1528901376.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:36.523Z,1528901376.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:36.911Z,1528901376.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:36.936Z,1528901376.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:37.310Z,1528901377.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:37.332Z,1528901377.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:37.710Z,1528901377.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:37.728Z,1528901377.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:38.102Z,1528901378.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:38.119Z,1528901378.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:38.502Z,1528901378.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:38.520Z,1528901378.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:38.899Z,1528901378.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:38.922Z,1528901378.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:39.302Z,1528901379.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:39.324Z,1528901379.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:39.710Z,1528901379.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:39.728Z,1528901379.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:40.110Z,1528901380.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:40.132Z,1528901380.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:40.511Z,1528901380.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:40.529Z,1528901380.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:40.901Z,1528901380.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:40.919Z,1528901380.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:41.305Z,1528901381.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:41.323Z,1528901381.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:41.702Z,1528901381.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:41.719Z,1528901381.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:42.094Z,1528901382.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:42.127Z,1528901382.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:42.499Z,1528901382.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:42.522Z,1528901382.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:42.911Z,1528901382.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:42.929Z,1528901382.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:43.314Z,1528901383.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:43.336Z,1528901383.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:43.710Z,1528901383.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:43.728Z,1528901383.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:44.102Z,1528901384.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:44.129Z,1528901384.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:44.501Z,1528901384.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:44.519Z,1528901384.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:44.899Z,1528901384.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:44.922Z,1528901384.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:45.299Z,1528901385.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:45.325Z,1528901385.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:45.709Z,1528901385.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:45.735Z,1528901385.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:46.113Z,1528901386.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:46.131Z,1528901386.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:46.512Z,1528901386.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:46.540Z,1528901386.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:46.901Z,1528901386.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:46.936Z,1528901386.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:47.301Z,1528901387.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:47.319Z,1528901387.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:47.702Z,1528901387.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:47.725Z,1528901387.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:48.107Z,1528901388.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:48.125Z,1528901388.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:48.499Z,1528901388.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:48.533Z,1528901388.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:48.916Z,1528901388.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:48.934Z,1528901388.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:49.311Z,1528901389.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:49.329Z,1528901389.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:49.712Z,1528901389.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:49.730Z,1528901389.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:50.096Z,1528901390.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:50.129Z,1528901390.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:50.495Z,1528901390.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:50.528Z,1528901390.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:50.896Z,1528901390.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:50.937Z,1528901390.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:51.295Z,1528901391.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:51.339Z,1528901391.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:51.712Z,1528901391.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:51.730Z,1528901391.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:52.116Z,1528901392.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:52.140Z,1528901392.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:52.515Z,1528901392.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:52.534Z,1528901392.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:52.895Z,1528901392.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:52.936Z,1528901392.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:53.291Z,1528901393.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:53.327Z,1528901393.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:53.699Z,1528901393.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:53.728Z,1528901393.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:54.096Z,1528901394.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:54.131Z,1528901394.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:54.495Z,1528901394.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:54.531Z,1528901394.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:54.917Z,1528901394.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:54.936Z,1528901394.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:55.319Z,1528901395.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:55.337Z,1528901395.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:55.716Z,1528901395.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:55.740Z,1528901395.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:56.095Z,1528901396.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:56.133Z,1528901396.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:56.495Z,1528901396.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:56.532Z,1528901396.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:56.900Z,1528901396.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:56.927Z,1528901396.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:57.295Z,1528901397.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:57.329Z,1528901397.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:57.713Z,1528901397.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:57.736Z,1528901397.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:58.114Z,1528901398.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:58.138Z,1528901398.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:58.518Z,1528901398.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:58.570Z,1528901398.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:58.895Z,1528901398.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:58.932Z,1528901398.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:59.295Z,1528901399.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:59.327Z,1528901399.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:49:59.695Z,1528901399.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:49:59.734Z,1528901399.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:00.100Z,1528901400.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:00.131Z,1528901400.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:00.499Z,1528901400.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:00.536Z,1528901400.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:00.916Z,1528901400.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:00.935Z,1528901400.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:01.316Z,1528901401.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:01.340Z,1528901401.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:01.715Z,1528901401.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:01.734Z,1528901401.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:02.095Z,1528901402.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:02.121Z,1528901402.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:02.496Z,1528901402.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:02.535Z,1528901402.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:02.896Z,1528901402.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:02.929Z,1528901402.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:03.300Z,1528901403.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:03.340Z,1528901403.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:03.709Z,1528901403.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:03.736Z,1528901403.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:04.109Z,1528901404.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:04.136Z,1528901404.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:04.510Z,1528901404.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:04.540Z,1528901404.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:04.894Z,1528901404.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:04.912Z,1528901404.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:05.296Z,1528901405.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:05.315Z,1528901405.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:05.696Z,1528901405.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:05.731Z,1528901405.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:06.094Z,1528901406.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:06.120Z,1528901406.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:06.504Z,1528901406.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:06.522Z,1528901406.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:06.909Z,1528901406.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:06.928Z,1528901406.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:07.309Z,1528901407.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:07.327Z,1528901407.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:07.706Z,1528901407.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:07.723Z,1528901407.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:08.101Z,1528901408.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:08.127Z,1528901408.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:08.502Z,1528901408.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:08.520Z,1528901408.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:08.900Z,1528901408.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:08.922Z,1528901408.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:09.307Z,1528901409.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:09.325Z,1528901409.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:12.429Z,1528901412.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:12.467Z,1528901412.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:12.593Z,1528901412.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:12.632Z,1528901412.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:12.996Z,1528901412.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:13.015Z,1528901413.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:13.372Z,1528901413.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:13.412Z,1528901413.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:13.771Z,1528901413.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:13.805Z,1528901413.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:14.172Z,1528901414.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:14.190Z,1528901414.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:14.571Z,1528901414.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:14.589Z,1528901414.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:14.985Z,1528901414.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:15.020Z,1528901415.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:15.385Z,1528901415.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:15.423Z,1528901415.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:15.786Z,1528901415.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:15.819Z,1528901415.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:16.172Z,1528901416.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:16.190Z,1528901416.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:16.572Z,1528901416.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:16.596Z,1528901416.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:16.975Z,1528901416.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:16.993Z,1528901416.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:17.375Z,1528901417.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:17.393Z,1528901417.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:17.786Z,1528901417.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:17.824Z,1528901417.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:18.186Z,1528901418.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:18.221Z,1528901418.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:18.582Z,1528901418.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:18.601Z,1528901418.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:18.977Z,1528901418.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:18.996Z,1528901418.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:19.377Z,1528901419.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:19.396Z,1528901419.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:19.776Z,1528901419.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:19.797Z,1528901419.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:20.179Z,1528901420.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:20.198Z,1528901420.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:20.571Z,1528901420.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:20.594Z,1528901420.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:20.982Z,1528901420.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:21.005Z,1528901421.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:21.386Z,1528901421.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:21.404Z,1528901421.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:21.782Z,1528901421.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:21.804Z,1528901421.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:22.176Z,1528901422.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:22.222Z,1528901422.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:22.578Z,1528901422.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:22.596Z,1528901422.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:22.976Z,1528901422.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:23.007Z,1528901423.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:23.375Z,1528901423.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:23.399Z,1528901423.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:23.791Z,1528901423.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:23.816Z,1528901423.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:24.192Z,1528901424.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:24.249Z,1528901424.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:24.587Z,1528901424.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:24.606Z,1528901424.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:24.975Z,1528901424.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:25.006Z,1528901425.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:25.367Z,1528901425.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:25.400Z,1528901425.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:25.771Z,1528901425.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:25.798Z,1528901425.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:26.172Z,1528901426.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:26.205Z,1528901426.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:26.571Z,1528901426.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:26.599Z,1528901426.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:26.986Z,1528901426.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:27.019Z,1528901427.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:27.392Z,1528901427.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:27.416Z,1528901427.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:27.782Z,1528901427.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:27.805Z,1528901427.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:28.171Z,1528901428.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:28.198Z,1528901428.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:28.571Z,1528901428.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:28.612Z,1528901428.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:28.972Z,1528901428.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:29.005Z,1528901429.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:29.371Z,1528901429.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:29.405Z,1528901429.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:29.797Z,1528901429.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:29.815Z,1528901429.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:30.190Z,1528901430.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:30.208Z,1528901430.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:30.587Z,1528901430.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:30.606Z,1528901430.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:30.970Z,1528901430.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:31.005Z,1528901431.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:31.371Z,1528901431.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:31.413Z,1528901431.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:31.772Z,1528901431.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:31.815Z,1528901431.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:32.168Z,1528901432.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:32.186Z,1528901432.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:32.567Z,1528901432.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:32.592Z,1528901432.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:32.985Z,1528901432.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:33.020Z,1528901433.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:33.390Z,1528901433.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:33.419Z,1528901433.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:33.787Z,1528901433.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:33.820Z,1528901433.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:34.172Z,1528901434.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:34.209Z,1528901434.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:34.576Z,1528901434.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:34.594Z,1528901434.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:34.976Z,1528901434.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:34.994Z,1528901434.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:35.374Z,1528901435.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:35.399Z,1528901435.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:35.785Z,1528901435.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:35.839Z,1528901435.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:36.186Z,1528901436.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:36.221Z,1528901436.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:36.586Z,1528901436.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:36.605Z,1528901436.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:36.975Z,1528901436.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:37.006Z,1528901437.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:37.370Z,1528901437.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:37.413Z,1528901437.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:37.775Z,1528901437.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:37.800Z,1528901437.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:38.179Z,1528901438.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:38.198Z,1528901438.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:38.578Z,1528901438.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:38.598Z,1528901438.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:38.986Z,1528901438.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:39.006Z,1528901439.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:39.392Z,1528901439.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:39.411Z,1528901439.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:39.783Z,1528901439.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:39.802Z,1528901439.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:40.175Z,1528901440.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:40.199Z,1528901440.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:40.578Z,1528901440.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:40.602Z,1528901440.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:40.978Z,1528901440.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:40.996Z,1528901440.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:41.381Z,1528901441.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:41.400Z,1528901441.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:41.795Z,1528901441.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:41.820Z,1528901441.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:42.191Z,1528901442.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:42.228Z,1528901442.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:42.587Z,1528901442.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:42.606Z,1528901442.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:42.972Z,1528901442.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:43.005Z,1528901443.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:43.372Z,1528901443.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:43.405Z,1528901443.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:43.771Z,1528901443.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:43.811Z,1528901443.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:44.172Z,1528901444.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:44.214Z,1528901444.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:44.567Z,1528901444.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:44.605Z,1528901444.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:44.991Z,1528901444.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:45.010Z,1528901445.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:45.390Z,1528901445.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:45.416Z,1528901445.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:45.781Z,1528901445.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:45.810Z,1528901445.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:46.175Z,1528901446.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:46.209Z,1528901446.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:46.575Z,1528901446.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:46.614Z,1528901446.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:46.976Z,1528901446.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:47.016Z,1528901447.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:47.374Z,1528901447.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:47.392Z,1528901447.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:47.785Z,1528901447.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:47.804Z,1528901447.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:48.189Z,1528901448.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:48.208Z,1528901448.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:48.582Z,1528901448.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:48.605Z,1528901448.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:48.978Z,1528901448.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:48.996Z,1528901448.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:49.371Z,1528901449.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:49.394Z,1528901449.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:49.780Z,1528901449.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:49.798Z,1528901449.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:50.179Z,1528901450.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:50.198Z,1528901450.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:50.577Z,1528901450.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:50.595Z,1528901450.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:50.982Z,1528901450.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:51.005Z,1528901451.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:51.390Z,1528901451.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:51.408Z,1528901451.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:51.786Z,1528901451.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:51.804Z,1528901451.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:52.175Z,1528901452.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:52.209Z,1528901452.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:52.578Z,1528901452.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:52.596Z,1528901452.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:52.981Z,1528901452.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:52.000Z,1528901453.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:53.381Z,1528901453.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:53.405Z,1528901453.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:53.787Z,1528901453.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:53.806Z,1528901453.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:54.187Z,1528901454.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:54.206Z,1528901454.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:54.589Z,1528901454.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:54.608Z,1528901454.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:54.980Z,1528901454.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:55.005Z,1528901455.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:55.366Z,1528901455.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:55.412Z,1528901455.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:55.775Z,1528901455.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:55.800Z,1528901455.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:56.183Z,1528901456.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:56.202Z,1528901456.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:56.579Z,1528901456.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:56.605Z,1528901456.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:56.992Z,1528901456.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:57.016Z,1528901457.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:57.392Z,1528901457.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:57.411Z,1528901457.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:57.783Z,1528901457.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:57.814Z,1528901457.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:58.181Z,1528901458.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:58.205Z,1528901458.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:58.582Z,1528901458.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:58.602Z,1528901458.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:58.967Z,1528901458.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:59.005Z,1528901459.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:59.380Z,1528901459.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:59.399Z,1528901459.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:50:59.796Z,1528901459.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:50:59.820Z,1528901459.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:00.194Z,1528901460.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:00.220Z,1528901460.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:00.587Z,1528901460.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:00.606Z,1528901460.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:00.978Z,1528901460.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:01.008Z,1528901461.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:01.374Z,1528901461.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:01.408Z,1528901461.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:01.776Z,1528901461.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:01.808Z,1528901461.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:02.175Z,1528901462.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:02.210Z,1528901462.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:02.574Z,1528901462.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:02.612Z,1528901462.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:02.992Z,1528901462.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:03.010Z,1528901463.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:03.396Z,1528901463.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:03.415Z,1528901463.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:03.782Z,1528901463.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:03.819Z,1528901463.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:04.173Z,1528901464.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:04.216Z,1528901464.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:04.579Z,1528901464.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:04.609Z,1528901464.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:04.976Z,1528901464.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:05.012Z,1528901465.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:05.375Z,1528901465.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:05.408Z,1528901465.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:05.794Z,1528901465.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:05.820Z,1528901465.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:06.182Z,1528901466.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:06.220Z,1528901466.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:06.590Z,1528901466.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:06.614Z,1528901466.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:06.975Z,1528901466.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:07.014Z,1528901467.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:07.372Z,1528901467.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:07.429Z,1528901467.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:07.774Z,1528901467.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:07.820Z,1528901467.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:08.175Z,1528901468.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:08.209Z,1528901468.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:08.575Z,1528901468.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:08.594Z,1528901468.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:08.987Z,1528901468.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:09.022Z,1528901469.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:09.393Z,1528901469.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:09.433Z,1528901469.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:12.510Z,1528901472.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:12.528Z,1528901472.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:12.532Z,1528901472.532 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T14:46:12.2Z
2018-06-13T14:51:12.532Z,1528901472.532 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T14:51:12.532Z,1528901472.532 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T14:51:12.644Z,1528901472.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:12.674Z,1528901472.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:13.808Z,1528901473.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:13.835Z,1528901473.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:13.946Z,1528901473.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:13.988Z,1528901473.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:14.368Z,1528901474.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:14.387Z,1528901474.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:14.765Z,1528901474.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:14.800Z,1528901474.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:15.162Z,1528901475.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:15.190Z,1528901475.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:15.551Z,1528901475.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:15.589Z,1528901475.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:15.952Z,1528901475.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:15.992Z,1528901475.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:16.351Z,1528901476.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:16.369Z,1528901476.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:16.761Z,1528901476.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:16.798Z,1528901476.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:17.166Z,1528901477.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:17.200Z,1528901477.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:17.562Z,1528901477.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:17.598Z,1528901477.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:17.951Z,1528901477.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:17.970Z,1528901477.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:18.350Z,1528901478.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:18.368Z,1528901478.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:21.478Z,1528901481.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:21.512Z,1528901481.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:21.601Z,1528901481.601 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0264.lzma
2018-06-13T14:51:21.649Z,1528901481.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:21.701Z,1528901481.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:22.049Z,1528901482.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:22.067Z,1528901482.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:22.402Z,1528901482.402 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0264.lzma.bak
2018-06-13T14:51:22.402Z,1528901482.402 [DataOverHttps](INFO): SBD MOMSN=8329409
2018-06-13T14:51:22.431Z,1528901482.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:22.466Z,1528901482.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:24.388Z,1528901484.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:24.406Z,1528901484.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:24.516Z,1528901484.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:24.563Z,1528901484.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:24.943Z,1528901484.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:24.961Z,1528901484.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:25.343Z,1528901485.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:25.369Z,1528901485.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:25.734Z,1528901485.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:25.770Z,1528901485.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:26.127Z,1528901486.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:26.164Z,1528901486.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:26.527Z,1528901486.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:26.565Z,1528901486.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:26.924Z,1528901486.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:26.942Z,1528901486.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:27.327Z,1528901487.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:27.344Z,1528901487.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:27.742Z,1528901487.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:27.785Z,1528901487.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:30.866Z,1528901490.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:30.885Z,1528901490.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:31.013Z,1528901491.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:31.032Z,1528901491.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:31.395Z,1528901491.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:31.427Z,1528901491.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:31.793Z,1528901491.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:31.828Z,1528901491.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:32.193Z,1528901492.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:32.231Z,1528901492.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:32.603Z,1528901492.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:32.641Z,1528901492.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:33.011Z,1528901493.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:33.042Z,1528901493.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:33.413Z,1528901493.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:33.440Z,1528901493.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:33.814Z,1528901493.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:33.848Z,1528901493.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:34.198Z,1528901494.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:34.216Z,1528901494.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:34.591Z,1528901494.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:34.639Z,1528901494.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:34.996Z,1528901494.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:35.020Z,1528901495.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:35.393Z,1528901495.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:35.417Z,1528901495.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:35.810Z,1528901495.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:35.844Z,1528901495.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:36.210Z,1528901496.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:36.252Z,1528901496.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:39.321Z,1528901499.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:39.364Z,1528901499.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:39.462Z,1528901499.462 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0265.lzma
2018-06-13T14:51:39.495Z,1528901499.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:39.520Z,1528901499.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:39.890Z,1528901499.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:39.908Z,1528901499.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:40.258Z,1528901500.258 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0265.lzma.bak
2018-06-13T14:51:40.258Z,1528901500.258 [DataOverHttps](INFO): SBD MOMSN=8329411
2018-06-13T14:51:40.302Z,1528901500.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:40.320Z,1528901500.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:42.210Z,1528901502.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:42.228Z,1528901502.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:42.260Z,1528901502.260 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T14:51:42.260Z,1528901502.260 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T14:51:42.260Z,1528901502.260 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T14:51:42.370Z,1528901502.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:42.417Z,1528901502.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:42.788Z,1528901502.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:42.806Z,1528901502.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:43.184Z,1528901503.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:43.208Z,1528901503.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:43.563Z,1528901503.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:43.596Z,1528901503.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:47.198Z,1528901507.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:47.254Z,1528901507.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:47.472Z,1528901507.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:47.563Z,1528901507.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:47.902Z,1528901507.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:48.046Z,1528901508.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:48.288Z,1528901508.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:48.424Z,1528901508.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:48.701Z,1528901508.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:48.728Z,1528901508.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:49.058Z,1528901509.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:49.076Z,1528901509.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:49.456Z,1528901509.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:49.491Z,1528901509.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:49.858Z,1528901509.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:49.876Z,1528901509.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:50.255Z,1528901510.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:50.272Z,1528901510.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:50.657Z,1528901510.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:50.676Z,1528901510.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:51.070Z,1528901511.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:51.108Z,1528901511.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:51.469Z,1528901511.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:51.487Z,1528901511.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:51.865Z,1528901511.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:51.888Z,1528901511.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:52.262Z,1528901512.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:52.280Z,1528901512.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:52.660Z,1528901512.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:52.678Z,1528901512.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:53.051Z,1528901513.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:53.090Z,1528901513.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:53.451Z,1528901513.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:53.486Z,1528901513.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:53.863Z,1528901513.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:53.891Z,1528901513.891 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:53.891Z,1528901513.891 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 228
2018-06-13T14:51:53.891Z,1528901513.891 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:51:53.892Z,1528901513.892 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:53.893Z,1528901513.893 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 228
2018-06-13T14:51:53.893Z,1528901513.893 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:51:53.895Z,1528901513.895 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:53.895Z,1528901513.895 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 228
2018-06-13T14:51:53.895Z,1528901513.895 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:51:53.966Z,1528901513.966 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:51:53.967Z,1528901513.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:51:53.967Z,1528901513.967 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:51:54.279Z,1528901514.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:54.378Z,1528901514.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:51:54.378Z,1528901514.378 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 228
2018-06-13T14:51:54.378Z,1528901514.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:51:54.378Z,1528901514.378 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 228
2018-06-13T14:51:54.379Z,1528901514.379 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:51:54.379Z,1528901514.379 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 228
2018-06-13T14:51:54.665Z,1528901514.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:54.690Z,1528901514.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:51:54.691Z,1528901514.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:51:54.691Z,1528901514.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:51:54.692Z,1528901514.692 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:51:54.692Z,1528901514.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:51:54.692Z,1528901514.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:51:54.693Z,1528901514.693 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:51:54.693Z,1528901514.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:51:54.693Z,1528901514.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:51:55.051Z,1528901515.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:55.080Z,1528901515.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:51:55.085Z,1528901515.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:55.459Z,1528901515.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:55.490Z,1528901515.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:51:55.491Z,1528901515.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:55.860Z,1528901515.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:55.877Z,1528901515.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:51:55.878Z,1528901515.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:56.263Z,1528901516.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:56.281Z,1528901516.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:51:56.282Z,1528901516.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:56.654Z,1528901516.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:56.680Z,1528901516.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:51:56.685Z,1528901516.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:57.064Z,1528901517.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:57.086Z,1528901517.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:51:57.087Z,1528901517.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:57.470Z,1528901517.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:57.496Z,1528901517.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:51:57.496Z,1528901517.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:57.875Z,1528901517.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:57.900Z,1528901517.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:51:57.901Z,1528901517.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:58.267Z,1528901518.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:58.285Z,1528901518.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:51:58.286Z,1528901518.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:58.652Z,1528901518.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:58.686Z,1528901518.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:51:58.686Z,1528901518.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:59.058Z,1528901519.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:59.083Z,1528901519.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:51:59.084Z,1528901519.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:59.450Z,1528901519.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:59.480Z,1528901519.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:51:59.485Z,1528901519.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:51:59.871Z,1528901519.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:51:59.889Z,1528901519.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:51:59.890Z,1528901519.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:00.274Z,1528901520.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:00.300Z,1528901520.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:52:00.300Z,1528901520.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:00.670Z,1528901520.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:00.692Z,1528901520.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:52:00.693Z,1528901520.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:01.055Z,1528901521.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:01.092Z,1528901521.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:52:01.093Z,1528901521.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:01.455Z,1528901521.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:01.493Z,1528901521.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:52:01.494Z,1528901521.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:01.847Z,1528901521.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:01.889Z,1528901521.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:52:01.890Z,1528901521.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:02.255Z,1528901522.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:02.300Z,1528901522.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:52:02.301Z,1528901522.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:02.651Z,1528901522.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:02.685Z,1528901522.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:52:02.686Z,1528901522.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:03.070Z,1528901523.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:03.094Z,1528901523.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:52:03.095Z,1528901523.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:03.476Z,1528901523.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:03.500Z,1528901523.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:52:03.501Z,1528901523.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:03.875Z,1528901523.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:03.900Z,1528901523.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:52:03.901Z,1528901523.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:04.253Z,1528901524.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:04.276Z,1528901524.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:52:04.276Z,1528901524.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:04.657Z,1528901524.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:04.680Z,1528901524.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:52:04.697Z,1528901524.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:05.054Z,1528901525.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:05.103Z,1528901525.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:52:05.104Z,1528901525.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:05.456Z,1528901525.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:05.501Z,1528901525.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:52:05.502Z,1528901525.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:05.866Z,1528901525.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:05.901Z,1528901525.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:52:05.902Z,1528901525.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:06.273Z,1528901526.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:06.300Z,1528901526.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:52:06.305Z,1528901526.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:06.664Z,1528901526.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:06.686Z,1528901526.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:52:06.687Z,1528901526.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:07.056Z,1528901527.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:07.082Z,1528901527.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:52:07.083Z,1528901527.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:07.463Z,1528901527.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:07.480Z,1528901527.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:52:07.481Z,1528901527.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:07.858Z,1528901527.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:07.876Z,1528901527.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:52:07.877Z,1528901527.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:08.255Z,1528901528.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:08.306Z,1528901528.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:52:08.307Z,1528901528.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:08.660Z,1528901528.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:08.689Z,1528901528.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:52:08.690Z,1528901528.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:09.064Z,1528901529.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:09.084Z,1528901529.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:52:09.085Z,1528901529.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:09.465Z,1528901529.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:09.483Z,1528901529.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:52:09.484Z,1528901529.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:09.864Z,1528901529.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:09.911Z,1528901529.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:52:09.912Z,1528901529.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:10.253Z,1528901530.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:10.292Z,1528901530.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:52:10.309Z,1528901530.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:10.659Z,1528901530.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:10.708Z,1528901530.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:52:10.709Z,1528901530.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:11.063Z,1528901531.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:11.080Z,1528901531.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:52:11.081Z,1528901531.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:11.451Z,1528901531.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:11.492Z,1528901531.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:52:11.506Z,1528901531.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:11.863Z,1528901531.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:11.885Z,1528901531.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:52:11.886Z,1528901531.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:12.266Z,1528901532.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:12.284Z,1528901532.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:52:12.285Z,1528901532.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:12.667Z,1528901532.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:12.685Z,1528901532.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:52:12.686Z,1528901532.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:13.055Z,1528901533.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:13.092Z,1528901533.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:52:13.107Z,1528901533.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:13.458Z,1528901533.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:13.480Z,1528901533.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:52:13.481Z,1528901533.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:13.851Z,1528901533.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:13.879Z,1528901533.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T14:52:13.880Z,1528901533.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:14.257Z,1528901534.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:14.288Z,1528901534.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:14.655Z,1528901534.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:14.687Z,1528901534.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:15.063Z,1528901535.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:15.086Z,1528901535.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:15.469Z,1528901535.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:15.487Z,1528901535.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:15.872Z,1528901535.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:15.889Z,1528901535.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:16.258Z,1528901536.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:16.310Z,1528901536.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:16.657Z,1528901536.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:16.681Z,1528901536.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:17.060Z,1528901537.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:17.082Z,1528901537.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:17.458Z,1528901537.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:17.476Z,1528901537.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:17.867Z,1528901537.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:17.911Z,1528901537.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:18.268Z,1528901538.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:18.290Z,1528901538.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:18.669Z,1528901538.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:18.689Z,1528901538.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:19.066Z,1528901539.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:19.084Z,1528901539.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:19.460Z,1528901539.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:19.510Z,1528901539.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:19.867Z,1528901539.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:19.890Z,1528901539.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:20.268Z,1528901540.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:20.288Z,1528901540.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:20.670Z,1528901540.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:20.688Z,1528901540.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:21.058Z,1528901541.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:21.111Z,1528901541.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:21.458Z,1528901541.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:21.478Z,1528901541.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:21.869Z,1528901541.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:21.890Z,1528901541.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:22.270Z,1528901542.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:22.292Z,1528901542.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:22.667Z,1528901542.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:22.711Z,1528901542.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:23.058Z,1528901543.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:23.076Z,1528901543.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:23.458Z,1528901543.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:23.483Z,1528901543.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:23.870Z,1528901543.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:23.888Z,1528901543.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:24.269Z,1528901544.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:24.312Z,1528901544.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:24.667Z,1528901544.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:24.691Z,1528901544.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:25.058Z,1528901545.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:25.081Z,1528901545.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:25.458Z,1528901545.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:25.480Z,1528901545.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:25.867Z,1528901545.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:25.885Z,1528901545.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:26.267Z,1528901546.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:26.289Z,1528901546.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:26.667Z,1528901546.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:26.721Z,1528901546.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:27.058Z,1528901547.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:27.081Z,1528901547.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:27.455Z,1528901547.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:27.478Z,1528901547.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:27.867Z,1528901547.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:27.916Z,1528901547.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:28.268Z,1528901548.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:28.291Z,1528901548.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:28.668Z,1528901548.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:28.690Z,1528901548.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:29.055Z,1528901549.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:29.089Z,1528901549.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:29.457Z,1528901549.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:29.475Z,1528901549.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:29.866Z,1528901549.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:29.889Z,1528901549.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:30.267Z,1528901550.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:30.290Z,1528901550.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:30.666Z,1528901550.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:30.712Z,1528901550.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:31.056Z,1528901551.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:31.079Z,1528901551.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:31.447Z,1528901551.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:31.475Z,1528901551.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:31.867Z,1528901551.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:31.889Z,1528901551.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:32.270Z,1528901552.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:32.287Z,1528901552.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:32.672Z,1528901552.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:32.689Z,1528901552.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:33.052Z,1528901553.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:33.080Z,1528901553.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:33.451Z,1528901553.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:33.498Z,1528901553.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:33.872Z,1528901553.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:33.890Z,1528901553.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:34.271Z,1528901554.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:34.290Z,1528901554.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:34.667Z,1528901554.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:34.686Z,1528901554.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:35.052Z,1528901555.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:35.090Z,1528901555.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:35.451Z,1528901555.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:35.478Z,1528901555.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:35.872Z,1528901555.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:35.896Z,1528901555.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:36.272Z,1528901556.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:36.301Z,1528901556.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:36.672Z,1528901556.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:36.695Z,1528901556.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:37.052Z,1528901557.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:37.082Z,1528901557.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:37.451Z,1528901557.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:37.491Z,1528901557.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:37.869Z,1528901557.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:37.887Z,1528901557.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:38.272Z,1528901558.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:38.295Z,1528901558.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:38.673Z,1528901558.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:38.696Z,1528901558.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:39.052Z,1528901559.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:39.084Z,1528901559.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:39.451Z,1528901559.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:39.484Z,1528901559.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:39.872Z,1528901559.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:39.920Z,1528901559.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:40.276Z,1528901560.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:40.294Z,1528901560.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:40.672Z,1528901560.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:40.696Z,1528901560.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:41.053Z,1528901561.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:41.083Z,1528901561.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:41.451Z,1528901561.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:41.483Z,1528901561.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:41.866Z,1528901561.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:41.890Z,1528901561.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:42.273Z,1528901562.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:42.296Z,1528901562.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:42.666Z,1528901562.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:42.691Z,1528901562.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:45.787Z,1528901565.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:45.805Z,1528901565.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:45.944Z,1528901565.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:45.978Z,1528901565.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:46.361Z,1528901566.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:46.396Z,1528901566.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:46.776Z,1528901566.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:46.794Z,1528901566.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:47.157Z,1528901567.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:47.193Z,1528901567.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:47.543Z,1528901567.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:47.560Z,1528901567.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:47.948Z,1528901567.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:47.979Z,1528901567.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:48.347Z,1528901568.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:48.365Z,1528901568.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:48.755Z,1528901568.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:48.790Z,1528901568.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:49.162Z,1528901569.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:49.186Z,1528901569.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:49.565Z,1528901569.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:49.596Z,1528901569.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:49.961Z,1528901569.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:49.986Z,1528901569.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:50.350Z,1528901570.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:50.368Z,1528901570.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:50.751Z,1528901570.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:50.769Z,1528901570.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:51.151Z,1528901571.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:51.169Z,1528901571.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:51.554Z,1528901571.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:51.572Z,1528901571.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:51.967Z,1528901571.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:52.003Z,1528901572.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:52.366Z,1528901572.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:52.398Z,1528901572.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:52.766Z,1528901572.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:52.799Z,1528901572.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:53.152Z,1528901573.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:53.171Z,1528901573.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:53.554Z,1528901573.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:53.573Z,1528901573.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:53.954Z,1528901573.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:53.973Z,1528901573.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:54.350Z,1528901574.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:54.368Z,1528901574.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:54.754Z,1528901574.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:54.772Z,1528901574.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:55.165Z,1528901575.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:55.195Z,1528901575.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:55.565Z,1528901575.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:55.583Z,1528901575.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:55.961Z,1528901575.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:55.980Z,1528901575.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:56.355Z,1528901576.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:56.381Z,1528901576.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:56.756Z,1528901576.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:56.775Z,1528901576.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:57.154Z,1528901577.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:57.172Z,1528901577.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:57.556Z,1528901577.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:57.581Z,1528901577.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:57.964Z,1528901577.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:57.998Z,1528901577.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:58.363Z,1528901578.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:58.380Z,1528901578.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:58.763Z,1528901578.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:58.781Z,1528901578.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:59.157Z,1528901579.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:59.175Z,1528901579.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:59.554Z,1528901579.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:59.578Z,1528901579.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:52:59.955Z,1528901579.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:52:59.979Z,1528901579.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:00.353Z,1528901580.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:00.371Z,1528901580.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:00.753Z,1528901580.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:00.770Z,1528901580.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:01.166Z,1528901581.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:01.188Z,1528901581.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:01.566Z,1528901581.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:01.588Z,1528901581.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:01.962Z,1528901581.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:01.984Z,1528901581.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:02.358Z,1528901582.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:02.384Z,1528901582.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:02.747Z,1528901582.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:02.774Z,1528901582.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:03.155Z,1528901583.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:03.189Z,1528901583.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:03.554Z,1528901583.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:03.588Z,1528901583.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:03.966Z,1528901583.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:03.992Z,1528901583.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:04.369Z,1528901584.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:04.407Z,1528901584.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:04.771Z,1528901584.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:04.789Z,1528901584.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:05.144Z,1528901585.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:05.175Z,1528901585.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:05.558Z,1528901585.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:05.575Z,1528901585.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:05.954Z,1528901585.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:05.982Z,1528901585.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:06.356Z,1528901586.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:06.382Z,1528901586.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:06.756Z,1528901586.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:06.774Z,1528901586.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:07.168Z,1528901587.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:07.186Z,1528901587.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:07.564Z,1528901587.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:07.588Z,1528901587.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:07.967Z,1528901587.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:07.985Z,1528901587.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:08.355Z,1528901588.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:08.381Z,1528901588.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:08.757Z,1528901588.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:08.780Z,1528901588.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:09.151Z,1528901589.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:09.192Z,1528901589.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:09.552Z,1528901589.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:09.610Z,1528901589.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:09.966Z,1528901589.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:09.984Z,1528901589.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:10.366Z,1528901590.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:10.385Z,1528901590.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:10.770Z,1528901590.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:10.790Z,1528901590.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:11.155Z,1528901591.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:11.176Z,1528901591.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:11.551Z,1528901591.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:11.577Z,1528901591.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:11.956Z,1528901591.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:11.974Z,1528901591.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:12.344Z,1528901592.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:12.388Z,1528901592.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:12.750Z,1528901592.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:12.785Z,1528901592.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:13.169Z,1528901593.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:13.194Z,1528901593.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:13.567Z,1528901593.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:13.592Z,1528901593.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:13.964Z,1528901593.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:14.017Z,1528901594.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:14.347Z,1528901594.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:14.396Z,1528901594.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:14.747Z,1528901594.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:14.779Z,1528901594.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:15.154Z,1528901595.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:15.184Z,1528901595.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:15.547Z,1528901595.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:15.582Z,1528901595.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:15.972Z,1528901595.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:15.990Z,1528901595.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:16.370Z,1528901596.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:16.391Z,1528901596.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:16.767Z,1528901596.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:16.792Z,1528901596.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:17.147Z,1528901597.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:17.184Z,1528901597.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:17.547Z,1528901597.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:17.586Z,1528901597.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:17.948Z,1528901597.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:17.989Z,1528901597.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:18.350Z,1528901598.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:18.390Z,1528901598.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:18.747Z,1528901598.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:18.795Z,1528901598.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:19.161Z,1528901599.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:19.198Z,1528901599.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:19.568Z,1528901599.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:19.600Z,1528901599.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:19.964Z,1528901599.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:19.994Z,1528901599.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:20.351Z,1528901600.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:20.403Z,1528901600.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:20.751Z,1528901600.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:20.771Z,1528901600.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:21.150Z,1528901601.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:21.173Z,1528901601.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:21.551Z,1528901601.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:21.573Z,1528901601.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:21.954Z,1528901601.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:22.000Z,1528901602.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:22.361Z,1528901602.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:22.404Z,1528901602.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:22.763Z,1528901602.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:22.784Z,1528901602.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:23.156Z,1528901603.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:23.176Z,1528901603.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:23.551Z,1528901603.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:23.603Z,1528901603.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:23.961Z,1528901603.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:23.985Z,1528901603.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:24.358Z,1528901604.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:24.380Z,1528901604.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:24.760Z,1528901604.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:24.784Z,1528901604.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:25.155Z,1528901605.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:25.207Z,1528901605.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:25.554Z,1528901605.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:25.571Z,1528901605.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:25.964Z,1528901605.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:25.986Z,1528901605.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:26.366Z,1528901606.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:26.384Z,1528901606.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:26.763Z,1528901606.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:26.811Z,1528901606.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:27.154Z,1528901607.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:27.194Z,1528901607.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:27.551Z,1528901607.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:27.582Z,1528901607.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:27.966Z,1528901607.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:27.985Z,1528901607.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:28.365Z,1528901608.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:28.415Z,1528901608.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:28.763Z,1528901608.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:28.784Z,1528901608.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:29.148Z,1528901609.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:29.178Z,1528901609.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:29.555Z,1528901609.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:29.578Z,1528901609.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:29.964Z,1528901609.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:29.982Z,1528901609.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:30.362Z,1528901610.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:30.381Z,1528901610.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:30.763Z,1528901610.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:30.786Z,1528901610.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:31.150Z,1528901611.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:31.178Z,1528901611.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:31.547Z,1528901611.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:31.571Z,1528901611.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:31.963Z,1528901611.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:31.981Z,1528901611.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:32.363Z,1528901612.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:32.390Z,1528901612.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:32.759Z,1528901612.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:32.783Z,1528901612.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:33.151Z,1528901613.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:33.185Z,1528901613.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:33.543Z,1528901613.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:33.581Z,1528901613.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:33.957Z,1528901613.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:34.002Z,1528901614.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:34.368Z,1528901614.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:34.391Z,1528901614.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:34.757Z,1528901614.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:34.799Z,1528901614.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:35.143Z,1528901615.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:35.173Z,1528901615.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:35.547Z,1528901615.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:35.564Z,1528901615.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:35.961Z,1528901615.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:35.994Z,1528901615.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:36.361Z,1528901616.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:36.390Z,1528901616.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:36.757Z,1528901616.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:36.792Z,1528901616.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:37.148Z,1528901617.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:37.166Z,1528901617.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:37.551Z,1528901617.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:37.600Z,1528901617.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:37.961Z,1528901617.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:37.995Z,1528901617.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:38.361Z,1528901618.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:38.379Z,1528901618.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:38.758Z,1528901618.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:38.775Z,1528901618.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:39.152Z,1528901619.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:39.170Z,1528901619.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:39.552Z,1528901619.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:39.569Z,1528901619.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:39.954Z,1528901619.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:39.972Z,1528901619.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:40.361Z,1528901620.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:40.379Z,1528901620.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:40.761Z,1528901620.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:40.808Z,1528901620.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:41.147Z,1528901621.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:41.172Z,1528901621.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:41.553Z,1528901621.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:41.571Z,1528901621.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:41.961Z,1528901621.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:41.979Z,1528901621.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:42.361Z,1528901622.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:42.379Z,1528901622.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:42.762Z,1528901622.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:42.779Z,1528901622.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:43.155Z,1528901623.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:43.172Z,1528901623.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:43.551Z,1528901623.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:43.574Z,1528901623.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:43.964Z,1528901623.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:43.982Z,1528901623.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:44.363Z,1528901624.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:44.388Z,1528901624.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:44.762Z,1528901624.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:44.780Z,1528901624.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:45.154Z,1528901625.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:45.172Z,1528901625.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:45.558Z,1528901625.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:45.576Z,1528901625.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:45.966Z,1528901625.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:45.984Z,1528901625.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:46.366Z,1528901626.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:46.412Z,1528901626.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:49.473Z,1528901629.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:49.516Z,1528901629.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:49.636Z,1528901629.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:49.670Z,1528901629.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:50.035Z,1528901630.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:50.067Z,1528901630.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:50.436Z,1528901630.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:50.467Z,1528901630.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:50.834Z,1528901630.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:50.868Z,1528901630.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:51.254Z,1528901631.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:51.277Z,1528901631.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:51.657Z,1528901631.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:51.674Z,1528901631.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:52.046Z,1528901632.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:52.084Z,1528901632.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:52.434Z,1528901632.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:52.473Z,1528901632.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:52.834Z,1528901632.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:52.852Z,1528901632.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:53.236Z,1528901633.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:53.254Z,1528901633.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:53.639Z,1528901633.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:53.657Z,1528901633.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:54.052Z,1528901634.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:54.083Z,1528901634.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:54.453Z,1528901634.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:54.479Z,1528901634.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:54.854Z,1528901634.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:54.879Z,1528901634.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:55.239Z,1528901635.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:55.257Z,1528901635.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:55.641Z,1528901635.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:55.659Z,1528901635.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:56.041Z,1528901636.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:56.059Z,1528901636.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:56.440Z,1528901636.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:56.458Z,1528901636.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:56.839Z,1528901636.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:56.858Z,1528901636.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:57.252Z,1528901637.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:57.290Z,1528901637.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:57.650Z,1528901637.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:57.687Z,1528901637.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:58.053Z,1528901638.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:58.087Z,1528901638.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:58.439Z,1528901638.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:58.457Z,1528901638.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:58.839Z,1528901638.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:58.861Z,1528901638.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:59.241Z,1528901639.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:59.259Z,1528901639.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:53:59.643Z,1528901639.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:53:59.661Z,1528901639.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:00.053Z,1528901640.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:00.086Z,1528901640.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:00.452Z,1528901640.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:00.486Z,1528901640.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:00.852Z,1528901640.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:00.886Z,1528901640.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:01.242Z,1528901641.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:01.259Z,1528901641.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:01.644Z,1528901641.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:01.662Z,1528901641.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:02.038Z,1528901642.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:02.086Z,1528901642.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:02.442Z,1528901642.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:02.484Z,1528901642.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:02.840Z,1528901642.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:02.858Z,1528901642.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:03.253Z,1528901643.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:03.285Z,1528901643.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:03.653Z,1528901643.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:03.687Z,1528901643.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:04.048Z,1528901644.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:04.066Z,1528901644.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:04.443Z,1528901644.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:04.462Z,1528901644.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:04.845Z,1528901644.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:04.862Z,1528901644.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:05.240Z,1528901645.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:05.283Z,1528901645.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:05.641Z,1528901645.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:05.687Z,1528901645.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:06.050Z,1528901646.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:06.068Z,1528901646.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:06.457Z,1528901646.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:06.488Z,1528901646.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:06.846Z,1528901646.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:06.888Z,1528901646.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:07.241Z,1528901647.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:07.280Z,1528901647.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:07.642Z,1528901647.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:07.664Z,1528901647.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:08.041Z,1528901648.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:08.071Z,1528901648.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:08.443Z,1528901648.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:08.473Z,1528901648.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:08.841Z,1528901648.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:08.893Z,1528901648.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:09.252Z,1528901649.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:09.270Z,1528901649.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:09.650Z,1528901649.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:09.667Z,1528901649.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:10.047Z,1528901650.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:10.091Z,1528901650.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:10.439Z,1528901650.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:10.487Z,1528901650.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:10.843Z,1528901650.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:10.862Z,1528901650.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:11.241Z,1528901651.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:11.266Z,1528901651.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:11.641Z,1528901651.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:11.676Z,1528901651.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:12.051Z,1528901652.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:12.072Z,1528901652.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:12.451Z,1528901652.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:12.469Z,1528901652.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:12.850Z,1528901652.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:12.867Z,1528901652.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:13.240Z,1528901653.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:13.273Z,1528901653.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:13.640Z,1528901653.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:13.663Z,1528901653.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:14.049Z,1528901654.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:14.067Z,1528901654.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:14.451Z,1528901654.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:14.469Z,1528901654.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:14.846Z,1528901654.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:14.894Z,1528901654.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:15.244Z,1528901655.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:15.267Z,1528901655.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:15.642Z,1528901655.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:15.669Z,1528901655.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:16.048Z,1528901656.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:16.066Z,1528901656.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:16.453Z,1528901656.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:16.491Z,1528901656.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:16.849Z,1528901656.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:16.872Z,1528901656.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:17.242Z,1528901657.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:17.266Z,1528901657.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:17.644Z,1528901657.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:17.662Z,1528901657.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:18.053Z,1528901658.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:18.096Z,1528901658.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:18.450Z,1528901658.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:18.473Z,1528901658.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:18.852Z,1528901658.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:18.872Z,1528901658.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:19.244Z,1528901659.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:19.274Z,1528901659.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:19.641Z,1528901659.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:19.694Z,1528901659.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:20.047Z,1528901660.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:20.074Z,1528901660.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:20.450Z,1528901660.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:20.473Z,1528901660.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:20.850Z,1528901660.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:20.869Z,1528901660.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:21.245Z,1528901661.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:21.295Z,1528901661.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:21.639Z,1528901661.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:21.668Z,1528901661.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:22.048Z,1528901662.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:22.071Z,1528901662.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:22.452Z,1528901662.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:22.470Z,1528901662.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:22.851Z,1528901662.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:22.898Z,1528901662.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:23.242Z,1528901663.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:23.260Z,1528901663.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:23.639Z,1528901663.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:23.667Z,1528901663.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:24.053Z,1528901664.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:24.073Z,1528901664.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:24.450Z,1528901664.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:24.500Z,1528901664.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:24.850Z,1528901664.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:24.877Z,1528901664.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:25.242Z,1528901665.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:25.270Z,1528901665.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:25.641Z,1528901665.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:25.663Z,1528901665.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:26.050Z,1528901666.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:26.067Z,1528901666.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:26.452Z,1528901666.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:26.472Z,1528901666.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:26.847Z,1528901666.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:26.880Z,1528901666.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:27.242Z,1528901667.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:27.265Z,1528901667.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:27.639Z,1528901667.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:27.665Z,1528901667.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:28.046Z,1528901668.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:28.068Z,1528901668.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:28.455Z,1528901668.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:28.477Z,1528901668.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:28.858Z,1528901668.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:28.878Z,1528901668.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:29.242Z,1528901669.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:29.280Z,1528901669.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:29.642Z,1528901669.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:29.664Z,1528901669.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:30.056Z,1528901670.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:30.079Z,1528901670.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:30.455Z,1528901670.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:30.477Z,1528901670.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:30.854Z,1528901670.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:30.904Z,1528901670.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:31.243Z,1528901671.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:31.262Z,1528901671.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:31.631Z,1528901671.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:31.667Z,1528901671.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:32.050Z,1528901672.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:32.085Z,1528901672.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:32.454Z,1528901672.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:32.479Z,1528901672.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:32.846Z,1528901672.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:32.882Z,1528901672.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:33.236Z,1528901673.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:33.267Z,1528901673.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:33.635Z,1528901673.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:33.670Z,1528901673.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:34.045Z,1528901674.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:34.079Z,1528901674.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:34.449Z,1528901674.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:34.488Z,1528901674.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:34.849Z,1528901674.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:34.884Z,1528901674.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:35.231Z,1528901675.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:35.249Z,1528901675.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:35.639Z,1528901675.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:35.656Z,1528901675.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:36.049Z,1528901676.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:36.094Z,1528901676.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:36.450Z,1528901676.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:36.495Z,1528901676.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:36.849Z,1528901676.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:36.885Z,1528901676.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:37.242Z,1528901677.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:37.260Z,1528901677.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:37.641Z,1528901677.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:37.659Z,1528901677.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:38.050Z,1528901678.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:38.067Z,1528901678.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:38.450Z,1528901678.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:38.496Z,1528901678.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:38.850Z,1528901678.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:38.868Z,1528901678.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:39.246Z,1528901679.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:39.264Z,1528901679.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:39.639Z,1528901679.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:39.664Z,1528901679.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:40.048Z,1528901680.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:40.066Z,1528901680.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:40.455Z,1528901680.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:40.474Z,1528901680.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:40.856Z,1528901680.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:40.874Z,1528901680.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:41.237Z,1528901681.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:41.265Z,1528901681.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:41.635Z,1528901681.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:41.669Z,1528901681.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:42.055Z,1528901682.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:42.078Z,1528901682.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:42.455Z,1528901682.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:42.473Z,1528901682.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:42.851Z,1528901682.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:42.869Z,1528901682.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:45.965Z,1528901685.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:45.983Z,1528901685.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:46.092Z,1528901686.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:46.135Z,1528901686.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:46.514Z,1528901686.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:46.536Z,1528901686.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:46.917Z,1528901686.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:46.936Z,1528901686.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:47.310Z,1528901687.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:47.329Z,1528901687.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:47.700Z,1528901687.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:47.735Z,1528901687.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:48.103Z,1528901688.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:48.126Z,1528901688.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:48.492Z,1528901688.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:48.536Z,1528901688.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:48.898Z,1528901688.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:48.934Z,1528901688.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:49.320Z,1528901689.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:49.338Z,1528901689.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:49.711Z,1528901689.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:49.734Z,1528901689.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:50.110Z,1528901690.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:50.149Z,1528901690.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:50.495Z,1528901690.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:50.535Z,1528901690.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:50.891Z,1528901690.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:50.930Z,1528901690.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:51.294Z,1528901691.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:51.333Z,1528901691.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:51.695Z,1528901691.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:51.744Z,1528901691.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:52.106Z,1528901692.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:52.138Z,1528901692.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:52.512Z,1528901692.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:52.544Z,1528901692.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:52.911Z,1528901692.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:52.945Z,1528901692.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:53.299Z,1528901693.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:53.348Z,1528901693.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:53.699Z,1528901693.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:53.744Z,1528901693.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:54.100Z,1528901694.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:54.139Z,1528901694.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:54.500Z,1528901694.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:54.519Z,1528901694.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:54.898Z,1528901694.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:54.944Z,1528901694.944 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:54.945Z,1528901694.945 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 229
2018-06-13T14:54:54.945Z,1528901694.945 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:54:54.947Z,1528901694.947 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:54.947Z,1528901694.947 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 229
2018-06-13T14:54:54.947Z,1528901694.947 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:54:54.948Z,1528901694.948 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:54.949Z,1528901694.949 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 229
2018-06-13T14:54:54.949Z,1528901694.949 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:54:55.021Z,1528901695.021 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:54:55.021Z,1528901695.021 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:54:55.022Z,1528901695.022 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:54:55.314Z,1528901695.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:55.421Z,1528901695.421 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:54:55.421Z,1528901695.421 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 229
2018-06-13T14:54:55.422Z,1528901695.422 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:54:55.422Z,1528901695.422 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 229
2018-06-13T14:54:55.422Z,1528901695.422 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:54:55.422Z,1528901695.422 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 229
2018-06-13T14:54:55.707Z,1528901695.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:55.742Z,1528901695.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:54:55.743Z,1528901695.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:54:55.743Z,1528901695.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:54:55.743Z,1528901695.743 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:54:55.744Z,1528901695.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:54:55.744Z,1528901695.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:54:55.744Z,1528901695.744 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:54:55.745Z,1528901695.745 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:54:55.745Z,1528901695.745 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:54:56.108Z,1528901696.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:56.148Z,1528901696.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:54:56.148Z,1528901696.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:56.501Z,1528901696.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:56.550Z,1528901696.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:54:56.551Z,1528901696.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:56.902Z,1528901696.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:56.925Z,1528901696.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:54:56.926Z,1528901696.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:57.300Z,1528901697.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:57.323Z,1528901697.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:54:57.323Z,1528901697.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:57.703Z,1528901697.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:57.723Z,1528901697.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:54:57.723Z,1528901697.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:58.106Z,1528901698.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:58.150Z,1528901698.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:54:58.151Z,1528901698.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:58.509Z,1528901698.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:58.532Z,1528901698.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:54:58.549Z,1528901698.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:58.911Z,1528901698.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:58.932Z,1528901698.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:54:58.945Z,1528901698.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:59.304Z,1528901699.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:59.324Z,1528901699.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:54:59.325Z,1528901699.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:54:59.702Z,1528901699.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:54:59.754Z,1528901699.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:54:59.755Z,1528901699.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:00.110Z,1528901700.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:00.132Z,1528901700.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:55:00.134Z,1528901700.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:00.512Z,1528901700.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:00.534Z,1528901700.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:55:00.535Z,1528901700.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:00.914Z,1528901700.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:00.931Z,1528901700.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:55:00.932Z,1528901700.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:01.300Z,1528901701.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:01.352Z,1528901701.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:55:01.353Z,1528901701.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:01.702Z,1528901701.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:01.733Z,1528901701.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:55:01.734Z,1528901701.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:02.111Z,1528901702.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:02.133Z,1528901702.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:55:02.134Z,1528901702.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:02.515Z,1528901702.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:02.533Z,1528901702.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:55:02.534Z,1528901702.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:02.911Z,1528901702.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:02.959Z,1528901702.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:55:02.960Z,1528901702.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:03.307Z,1528901703.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:03.324Z,1528901703.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:55:03.326Z,1528901703.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:03.703Z,1528901703.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:03.737Z,1528901703.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:55:03.738Z,1528901703.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:04.111Z,1528901704.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:04.131Z,1528901704.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:55:04.132Z,1528901704.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:04.515Z,1528901704.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:04.559Z,1528901704.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:55:04.560Z,1528901704.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:04.916Z,1528901704.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:04.942Z,1528901704.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:55:04.943Z,1528901704.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:05.296Z,1528901705.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:05.330Z,1528901705.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:55:05.331Z,1528901705.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:05.695Z,1528901705.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:05.728Z,1528901705.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:55:05.729Z,1528901705.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:06.116Z,1528901706.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:06.134Z,1528901706.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:55:06.135Z,1528901706.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:06.516Z,1528901706.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:06.538Z,1528901706.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:55:06.540Z,1528901706.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:06.911Z,1528901706.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:06.935Z,1528901706.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:55:06.935Z,1528901706.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:07.296Z,1528901707.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:07.330Z,1528901707.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:55:07.331Z,1528901707.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:07.695Z,1528901707.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:07.722Z,1528901707.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:55:07.723Z,1528901707.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:08.111Z,1528901708.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:08.130Z,1528901708.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:55:08.130Z,1528901708.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:08.516Z,1528901708.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:08.540Z,1528901708.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:55:08.540Z,1528901708.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:08.908Z,1528901708.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:08.930Z,1528901708.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:55:08.931Z,1528901708.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:09.296Z,1528901709.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:09.325Z,1528901709.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:55:09.326Z,1528901709.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:09.695Z,1528901709.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:09.724Z,1528901709.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:55:09.724Z,1528901709.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:10.111Z,1528901710.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:10.132Z,1528901710.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:55:10.134Z,1528901710.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:10.517Z,1528901710.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:10.539Z,1528901710.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:55:10.540Z,1528901710.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:10.912Z,1528901710.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:10.965Z,1528901710.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:55:10.966Z,1528901710.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:11.292Z,1528901711.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:11.332Z,1528901711.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:55:11.333Z,1528901711.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:11.695Z,1528901711.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:11.729Z,1528901711.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:55:11.731Z,1528901711.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:12.117Z,1528901712.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:12.139Z,1528901712.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:55:12.140Z,1528901712.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:12.516Z,1528901712.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:12.534Z,1528901712.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:55:12.535Z,1528901712.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:12.912Z,1528901712.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:12.929Z,1528901712.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:55:12.930Z,1528901712.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:13.296Z,1528901713.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:13.328Z,1528901713.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:55:13.329Z,1528901713.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:13.691Z,1528901713.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:13.731Z,1528901713.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:55:13.732Z,1528901713.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:14.105Z,1528901714.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:14.132Z,1528901714.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:55:14.134Z,1528901714.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:14.516Z,1528901714.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:14.534Z,1528901714.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:55:14.535Z,1528901714.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:14.905Z,1528901714.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:14.945Z,1528901714.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:15.296Z,1528901715.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:15.323Z,1528901715.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:15.695Z,1528901715.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:15.729Z,1528901715.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:16.101Z,1528901716.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:16.135Z,1528901716.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:16.513Z,1528901716.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:16.545Z,1528901716.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:16.914Z,1528901716.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:16.947Z,1528901716.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:17.300Z,1528901717.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:17.344Z,1528901717.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:17.699Z,1528901717.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:17.717Z,1528901717.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:18.110Z,1528901718.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:18.150Z,1528901718.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:18.509Z,1528901718.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:18.527Z,1528901718.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:18.906Z,1528901718.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:18.924Z,1528901718.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:19.300Z,1528901719.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:19.327Z,1528901719.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:19.697Z,1528901719.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:19.716Z,1528901719.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:20.107Z,1528901720.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:20.125Z,1528901720.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:20.510Z,1528901720.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:20.528Z,1528901720.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:20.906Z,1528901720.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:20.925Z,1528901720.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:21.301Z,1528901721.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:21.320Z,1528901721.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:21.699Z,1528901721.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:21.734Z,1528901721.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:22.111Z,1528901722.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:22.130Z,1528901722.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:22.514Z,1528901722.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:22.532Z,1528901722.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:22.916Z,1528901722.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:22.934Z,1528901722.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:23.302Z,1528901723.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:23.320Z,1528901723.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:23.699Z,1528901723.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:23.733Z,1528901723.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:24.116Z,1528901724.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:24.135Z,1528901724.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:24.515Z,1528901724.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:24.533Z,1528901724.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:24.916Z,1528901724.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:24.934Z,1528901724.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:25.296Z,1528901725.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:25.332Z,1528901725.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:25.691Z,1528901725.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:25.727Z,1528901725.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:26.105Z,1528901726.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:26.132Z,1528901726.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:26.515Z,1528901726.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:26.533Z,1528901726.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:26.902Z,1528901726.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:26.932Z,1528901726.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:27.299Z,1528901727.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:27.337Z,1528901727.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:27.695Z,1528901727.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:27.713Z,1528901727.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:28.105Z,1528901728.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:28.140Z,1528901728.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:28.508Z,1528901728.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:28.545Z,1528901728.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:28.910Z,1528901728.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:28.947Z,1528901728.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:29.298Z,1528901729.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:29.316Z,1528901729.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:29.698Z,1528901729.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:29.716Z,1528901729.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:30.109Z,1528901730.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:30.147Z,1528901730.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:30.509Z,1528901730.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:30.545Z,1528901730.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:30.914Z,1528901730.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:30.947Z,1528901730.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:31.299Z,1528901731.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:31.317Z,1528901731.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:31.698Z,1528901731.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:31.716Z,1528901731.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:32.110Z,1528901732.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:32.148Z,1528901732.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:32.509Z,1528901732.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:32.532Z,1528901732.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:32.906Z,1528901732.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:32.924Z,1528901732.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:33.305Z,1528901733.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:33.323Z,1528901733.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:33.702Z,1528901733.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:33.737Z,1528901733.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:34.101Z,1528901734.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:34.119Z,1528901734.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:34.511Z,1528901734.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:34.536Z,1528901734.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:34.915Z,1528901734.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:34.933Z,1528901734.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:35.307Z,1528901735.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:35.325Z,1528901735.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:35.695Z,1528901735.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:35.724Z,1528901735.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:36.095Z,1528901736.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:36.126Z,1528901736.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:36.500Z,1528901736.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:36.528Z,1528901736.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:36.895Z,1528901736.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:36.927Z,1528901736.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:37.316Z,1528901737.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:37.335Z,1528901737.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:37.709Z,1528901737.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:37.736Z,1528901737.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:38.105Z,1528901738.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:38.140Z,1528901738.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:38.496Z,1528901738.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:38.526Z,1528901738.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:38.895Z,1528901738.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:38.929Z,1528901738.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:39.295Z,1528901739.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:39.312Z,1528901739.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:39.700Z,1528901739.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:39.718Z,1528901739.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:40.094Z,1528901740.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:40.112Z,1528901740.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:40.510Z,1528901740.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:40.544Z,1528901740.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:40.913Z,1528901740.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:40.947Z,1528901740.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:41.309Z,1528901741.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:41.346Z,1528901741.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:41.699Z,1528901741.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:41.717Z,1528901741.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:42.098Z,1528901742.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:42.117Z,1528901742.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:42.499Z,1528901742.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:42.520Z,1528901742.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:42.903Z,1528901742.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:42.921Z,1528901742.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:46.025Z,1528901746.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:46.053Z,1528901746.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:46.186Z,1528901746.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:46.228Z,1528901746.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:46.594Z,1528901746.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:46.645Z,1528901746.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:46.972Z,1528901746.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:47.007Z,1528901747.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:47.364Z,1528901747.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:47.408Z,1528901747.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:47.768Z,1528901747.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:47.801Z,1528901747.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:48.182Z,1528901748.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:48.220Z,1528901748.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:48.577Z,1528901748.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:48.613Z,1528901748.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:48.980Z,1528901748.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:49.015Z,1528901749.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:49.364Z,1528901749.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:49.409Z,1528901749.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:49.763Z,1528901749.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:49.798Z,1528901749.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:50.177Z,1528901750.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:50.226Z,1528901750.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:50.577Z,1528901750.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:50.612Z,1528901750.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:50.973Z,1528901750.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:51.004Z,1528901751.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:51.368Z,1528901751.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:51.406Z,1528901751.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:51.767Z,1528901751.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:51.784Z,1528901751.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:52.182Z,1528901752.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:52.215Z,1528901752.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:52.585Z,1528901752.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:52.626Z,1528901752.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:52.985Z,1528901752.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:53.020Z,1528901753.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:53.368Z,1528901753.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:53.386Z,1528901753.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:53.770Z,1528901753.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:53.792Z,1528901753.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:54.181Z,1528901754.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:54.199Z,1528901754.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:54.577Z,1528901754.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:54.595Z,1528901754.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:54.978Z,1528901754.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:55.022Z,1528901755.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:55.374Z,1528901755.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:55.398Z,1528901755.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:55.767Z,1528901755.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:55.790Z,1528901755.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:56.179Z,1528901756.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:56.205Z,1528901756.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:56.582Z,1528901756.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:56.604Z,1528901756.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:56.979Z,1528901756.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:57.003Z,1528901757.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:57.371Z,1528901757.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:57.394Z,1528901757.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:57.773Z,1528901757.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:57.791Z,1528901757.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:58.180Z,1528901758.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:58.199Z,1528901758.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:58.582Z,1528901758.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:58.607Z,1528901758.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:58.983Z,1528901758.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:59.001Z,1528901759.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:59.364Z,1528901759.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:59.399Z,1528901759.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:55:59.770Z,1528901759.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:55:59.794Z,1528901759.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:00.186Z,1528901760.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:00.211Z,1528901760.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:00.583Z,1528901760.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:00.602Z,1528901760.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:00.986Z,1528901760.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:01.005Z,1528901761.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:01.373Z,1528901761.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:01.391Z,1528901761.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:01.773Z,1528901761.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:01.798Z,1528901761.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:02.183Z,1528901762.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:02.202Z,1528901762.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:02.587Z,1528901762.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:02.605Z,1528901762.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:02.980Z,1528901762.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:02.999Z,1528901762.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:03.371Z,1528901763.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:03.418Z,1528901763.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:03.767Z,1528901763.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:03.796Z,1528901763.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:04.184Z,1528901764.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:04.203Z,1528901764.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:04.583Z,1528901764.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:04.602Z,1528901764.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:04.985Z,1528901764.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:05.010Z,1528901765.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:05.368Z,1528901765.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:05.396Z,1528901765.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:05.767Z,1528901765.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:05.796Z,1528901765.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:06.189Z,1528901766.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:06.207Z,1528901766.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:06.588Z,1528901766.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:06.616Z,1528901766.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:06.984Z,1528901766.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:07.005Z,1528901767.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:07.367Z,1528901767.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:07.396Z,1528901767.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:07.763Z,1528901767.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:07.802Z,1528901767.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:08.183Z,1528901768.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:08.202Z,1528901768.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:08.589Z,1528901768.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:08.627Z,1528901768.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:08.983Z,1528901768.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:09.002Z,1528901769.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:09.368Z,1528901769.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:09.403Z,1528901769.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:09.767Z,1528901769.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:09.801Z,1528901769.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:10.184Z,1528901770.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:10.203Z,1528901770.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:10.586Z,1528901770.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:10.611Z,1528901770.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:10.987Z,1528901770.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:11.006Z,1528901771.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:11.364Z,1528901771.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:11.398Z,1528901771.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:11.767Z,1528901771.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:11.796Z,1528901771.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:12.181Z,1528901772.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:12.216Z,1528901772.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:12.582Z,1528901772.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:12.616Z,1528901772.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:12.977Z,1528901772.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:13.005Z,1528901773.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:13.372Z,1528901773.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:13.409Z,1528901773.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:13.767Z,1528901773.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:13.807Z,1528901773.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:14.177Z,1528901774.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:14.212Z,1528901774.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:14.581Z,1528901774.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:14.617Z,1528901774.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:14.978Z,1528901774.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:15.006Z,1528901775.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:15.368Z,1528901775.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:15.403Z,1528901775.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:15.767Z,1528901775.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:15.785Z,1528901775.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:16.181Z,1528901776.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:16.216Z,1528901776.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:16.585Z,1528901776.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:16.621Z,1528901776.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:16.981Z,1528901776.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:17.019Z,1528901777.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:17.372Z,1528901777.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:17.390Z,1528901777.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:17.770Z,1528901777.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:17.788Z,1528901777.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:18.181Z,1528901778.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:18.223Z,1528901778.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:18.581Z,1528901778.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:18.622Z,1528901778.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:18.981Z,1528901778.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:19.015Z,1528901779.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:19.370Z,1528901779.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:19.388Z,1528901779.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:19.773Z,1528901779.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:19.791Z,1528901779.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:20.174Z,1528901780.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:20.191Z,1528901780.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:20.581Z,1528901780.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:20.600Z,1528901780.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:20.981Z,1528901780.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:20.000Z,1528901781.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:21.378Z,1528901781.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:21.400Z,1528901781.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:21.774Z,1528901781.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:21.788Z,1528901781.788 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T14:56:21.788Z,1528901781.788 [BPC1] Communications Fault, FailCount= 1
2018-06-13T14:56:21.788Z,1528901781.788 [BPC1](ERROR): Communications Fault
2018-06-13T14:56:21.798Z,1528901781.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:21.877Z,1528901781.877 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T14:56:22.174Z,1528901782.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:22.192Z,1528901782.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:22.571Z,1528901782.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:22.594Z,1528901782.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:22.975Z,1528901782.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:22.993Z,1528901782.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:23.069Z,1528901783.069 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T14:56:23.069Z,1528901783.069 [BPC1] No Fault, FailCount= 1
2018-06-13T14:56:23.382Z,1528901783.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:23.456Z,1528901783.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:23.782Z,1528901783.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:23.804Z,1528901783.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:24.184Z,1528901784.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:24.205Z,1528901784.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:24.578Z,1528901784.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:24.595Z,1528901784.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:24.971Z,1528901784.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:25.004Z,1528901785.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:25.375Z,1528901785.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:25.405Z,1528901785.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:25.771Z,1528901785.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:25.788Z,1528901785.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:26.163Z,1528901786.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:26.200Z,1528901786.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:26.588Z,1528901786.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:26.612Z,1528901786.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:26.982Z,1528901786.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:27.016Z,1528901787.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:27.384Z,1528901787.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:27.402Z,1528901787.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:27.767Z,1528901787.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:27.802Z,1528901787.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:28.163Z,1528901788.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:28.180Z,1528901788.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:28.568Z,1528901788.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:28.601Z,1528901788.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:28.967Z,1528901788.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:28.986Z,1528901788.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:29.377Z,1528901789.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:29.415Z,1528901789.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:29.781Z,1528901789.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:29.815Z,1528901789.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:30.181Z,1528901790.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:30.200Z,1528901790.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:30.573Z,1528901790.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:30.590Z,1528901790.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:30.973Z,1528901790.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:30.990Z,1528901790.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:31.371Z,1528901791.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:31.401Z,1528901791.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:31.765Z,1528901791.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:31.805Z,1528901791.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:32.167Z,1528901792.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:32.201Z,1528901792.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:32.588Z,1528901792.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:32.607Z,1528901792.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:32.987Z,1528901792.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:33.006Z,1528901793.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:33.383Z,1528901793.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:33.402Z,1528901793.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:33.768Z,1528901793.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:33.807Z,1528901793.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:34.167Z,1528901794.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:34.194Z,1528901794.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:34.568Z,1528901794.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:34.595Z,1528901794.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:34.967Z,1528901794.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:34.996Z,1528901794.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:35.383Z,1528901795.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:35.402Z,1528901795.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:35.788Z,1528901795.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:35.806Z,1528901795.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:36.188Z,1528901796.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:36.208Z,1528901796.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:36.567Z,1528901796.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:36.594Z,1528901796.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:36.967Z,1528901796.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:36.993Z,1528901796.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:37.367Z,1528901797.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:37.398Z,1528901797.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:37.768Z,1528901797.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:37.795Z,1528901797.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:38.167Z,1528901798.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:38.201Z,1528901798.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:38.588Z,1528901798.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:38.606Z,1528901798.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:38.983Z,1528901798.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:39.002Z,1528901799.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:39.384Z,1528901799.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:39.404Z,1528901799.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:39.767Z,1528901799.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:39.802Z,1528901799.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:40.167Z,1528901800.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:40.205Z,1528901800.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:40.572Z,1528901800.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:40.601Z,1528901800.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:40.968Z,1528901800.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:41.003Z,1528901801.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:41.373Z,1528901801.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:41.403Z,1528901801.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:41.787Z,1528901801.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:41.806Z,1528901801.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:42.178Z,1528901802.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:42.223Z,1528901802.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:42.571Z,1528901802.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:42.605Z,1528901802.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:42.608Z,1528901802.608 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T14:56:42.608Z,1528901802.608 [Default:CheckIn:C.Wait] Stopped
2018-06-13T14:56:42.608Z,1528901802.608 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T14:56:42.609Z,1528901802.609 [Default:CheckIn:D] Running Loop=1
2018-06-13T14:56:42.971Z,1528901802.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:43.004Z,1528901803.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:43.007Z,1528901803.007 [Default:CheckIn:D] Stopped
2018-06-13T14:56:43.007Z,1528901803.007 [Default:CheckIn:E] Running Loop=1
2018-06-13T14:56:43.371Z,1528901803.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:43.411Z,1528901803.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:43.414Z,1528901803.414 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 689.492708 min 
2018-06-13T14:56:43.414Z,1528901803.414 [Default:CheckIn:E] Stopped
2018-06-13T14:56:43.414Z,1528901803.414 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T14:56:43.414Z,1528901803.414 [Default:CheckIn] Stopped
2018-06-13T14:56:43.415Z,1528901803.415 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T14:56:43.415Z,1528901803.415 [Default:CheckIn](INFO): Running loop #67
2018-06-13T14:56:43.415Z,1528901803.415 [Default:CheckIn] Running Loop=67
2018-06-13T14:56:43.415Z,1528901803.415 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T14:56:43.415Z,1528901803.415 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T14:56:43.767Z,1528901803.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:43.798Z,1528901803.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:44.171Z,1528901804.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:44.201Z,1528901804.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:44.586Z,1528901804.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:44.617Z,1528901804.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:44.981Z,1528901804.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:45.019Z,1528901805.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:45.382Z,1528901805.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:45.420Z,1528901805.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:45.774Z,1528901805.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:45.792Z,1528901805.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:46.170Z,1528901806.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:46.188Z,1528901806.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:46.574Z,1528901806.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:46.596Z,1528901806.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:49.691Z,1528901809.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:49.723Z,1528901809.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:49.850Z,1528901809.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:49.887Z,1528901809.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:50.263Z,1528901810.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:50.281Z,1528901810.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:50.658Z,1528901810.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:50.684Z,1528901810.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:51.039Z,1528901811.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:51.075Z,1528901811.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:51.444Z,1528901811.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:51.480Z,1528901811.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:51.839Z,1528901811.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:51.872Z,1528901811.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:52.249Z,1528901812.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:52.276Z,1528901812.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:52.653Z,1528901812.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:52.694Z,1528901812.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:53.053Z,1528901813.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:53.097Z,1528901813.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:53.437Z,1528901813.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:53.454Z,1528901813.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:53.839Z,1528901813.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:53.880Z,1528901813.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:54.257Z,1528901814.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:54.286Z,1528901814.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:54.657Z,1528901814.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:54.690Z,1528901814.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:55.053Z,1528901815.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:55.087Z,1528901815.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:55.444Z,1528901815.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:55.463Z,1528901815.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:55.842Z,1528901815.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:55.860Z,1528901815.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:56.253Z,1528901816.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:56.293Z,1528901816.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:56.653Z,1528901816.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:56.671Z,1528901816.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:57.054Z,1528901817.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:57.071Z,1528901817.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:57.444Z,1528901817.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:57.471Z,1528901817.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:57.846Z,1528901817.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:57.864Z,1528901817.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:58.251Z,1528901818.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:58.269Z,1528901818.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:58.653Z,1528901818.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:58.671Z,1528901818.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:59.053Z,1528901819.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:59.071Z,1528901819.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:59.444Z,1528901819.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:59.468Z,1528901819.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:56:59.845Z,1528901819.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:56:59.863Z,1528901819.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:00.258Z,1528901820.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:00.296Z,1528901820.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:00.653Z,1528901820.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:00.671Z,1528901820.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:01.051Z,1528901821.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:01.068Z,1528901821.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:01.447Z,1528901821.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:01.465Z,1528901821.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:01.839Z,1528901821.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:01.862Z,1528901821.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:02.255Z,1528901822.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:02.280Z,1528901822.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:02.655Z,1528901822.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:02.673Z,1528901822.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:03.056Z,1528901823.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:03.074Z,1528901823.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:03.443Z,1528901823.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:03.466Z,1528901823.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:03.844Z,1528901823.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:03.871Z,1528901823.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:04.245Z,1528901824.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:04.263Z,1528901824.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:04.655Z,1528901824.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:04.673Z,1528901824.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:05.060Z,1528901825.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:05.077Z,1528901825.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:05.450Z,1528901825.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:05.482Z,1528901825.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:05.846Z,1528901825.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:05.863Z,1528901825.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:06.247Z,1528901826.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:06.265Z,1528901826.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:06.636Z,1528901826.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:06.672Z,1528901826.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:07.039Z,1528901827.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:07.080Z,1528901827.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:07.461Z,1528901827.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:07.479Z,1528901827.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:07.857Z,1528901827.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:07.875Z,1528901827.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:08.259Z,1528901828.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:08.278Z,1528901828.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:08.640Z,1528901828.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:08.682Z,1528901828.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:09.040Z,1528901829.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:09.069Z,1528901829.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:09.440Z,1528901829.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:09.468Z,1528901829.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:09.841Z,1528901829.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:09.880Z,1528901829.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:10.235Z,1528901830.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:10.276Z,1528901830.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:10.654Z,1528901830.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:10.678Z,1528901830.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:11.061Z,1528901831.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:11.079Z,1528901831.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:11.458Z,1528901831.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:11.475Z,1528901831.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:11.840Z,1528901831.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:11.881Z,1528901831.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:12.239Z,1528901832.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:12.274Z,1528901832.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:12.640Z,1528901832.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:12.681Z,1528901832.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:13.039Z,1528901833.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:13.072Z,1528901833.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:13.453Z,1528901833.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:13.483Z,1528901833.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:13.849Z,1528901833.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:13.878Z,1528901833.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:14.249Z,1528901834.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:14.276Z,1528901834.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:14.640Z,1528901834.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:14.674Z,1528901834.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:15.039Z,1528901835.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:15.057Z,1528901835.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:15.443Z,1528901835.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:15.461Z,1528901835.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:15.843Z,1528901835.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:15.861Z,1528901835.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:16.238Z,1528901836.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:16.267Z,1528901836.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:16.654Z,1528901836.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:16.684Z,1528901836.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:17.054Z,1528901837.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:17.071Z,1528901837.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:17.450Z,1528901837.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:17.468Z,1528901837.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:17.845Z,1528901837.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:17.863Z,1528901837.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:18.246Z,1528901838.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:18.265Z,1528901838.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:18.646Z,1528901838.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:18.665Z,1528901838.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:19.043Z,1528901839.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:19.072Z,1528901839.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:19.455Z,1528901839.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:19.480Z,1528901839.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:19.854Z,1528901839.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:19.876Z,1528901839.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:20.254Z,1528901840.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:20.276Z,1528901840.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:20.646Z,1528901840.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:20.678Z,1528901840.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:21.039Z,1528901841.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:21.062Z,1528901841.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:21.443Z,1528901841.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:21.475Z,1528901841.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:21.847Z,1528901841.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:21.865Z,1528901841.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:22.239Z,1528901842.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:22.263Z,1528901842.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:22.655Z,1528901842.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:22.673Z,1528901842.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:23.055Z,1528901843.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:23.073Z,1528901843.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:23.449Z,1528901843.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:23.494Z,1528901843.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:23.846Z,1528901843.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:23.907Z,1528901843.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:24.243Z,1528901844.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:24.269Z,1528901844.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:24.639Z,1528901844.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:24.664Z,1528901844.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:25.046Z,1528901845.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:25.063Z,1528901845.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:25.458Z,1528901845.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:25.477Z,1528901845.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:25.855Z,1528901845.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:25.872Z,1528901845.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:26.255Z,1528901846.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:26.273Z,1528901846.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:26.647Z,1528901846.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:26.665Z,1528901846.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:27.039Z,1528901847.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:27.064Z,1528901847.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:27.443Z,1528901847.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:27.467Z,1528901847.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:27.847Z,1528901847.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:27.866Z,1528901847.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:28.241Z,1528901848.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:28.268Z,1528901848.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:28.654Z,1528901848.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:28.672Z,1528901848.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:29.056Z,1528901849.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:29.074Z,1528901849.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:29.450Z,1528901849.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:29.483Z,1528901849.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:29.843Z,1528901849.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:29.867Z,1528901849.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:30.246Z,1528901850.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:30.278Z,1528901850.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:30.646Z,1528901850.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:30.664Z,1528901850.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:31.045Z,1528901851.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:31.063Z,1528901851.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:31.455Z,1528901851.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:31.474Z,1528901851.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:31.858Z,1528901851.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:31.876Z,1528901851.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:32.255Z,1528901852.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:32.273Z,1528901852.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:32.646Z,1528901852.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:32.670Z,1528901852.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:33.047Z,1528901853.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:33.065Z,1528901853.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:33.443Z,1528901853.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:33.467Z,1528901853.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:33.843Z,1528901853.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:33.884Z,1528901853.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:34.235Z,1528901854.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:34.271Z,1528901854.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:34.655Z,1528901854.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:34.673Z,1528901854.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:35.060Z,1528901855.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:35.079Z,1528901855.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:35.455Z,1528901855.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:35.473Z,1528901855.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:35.850Z,1528901855.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:35.875Z,1528901855.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:36.239Z,1528901856.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:36.288Z,1528901856.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:36.640Z,1528901856.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:36.692Z,1528901856.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:37.039Z,1528901857.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:37.075Z,1528901857.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:37.459Z,1528901857.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:37.477Z,1528901857.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:37.860Z,1528901857.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:37.878Z,1528901857.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:38.256Z,1528901858.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:38.274Z,1528901858.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:38.639Z,1528901858.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:38.678Z,1528901858.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:39.035Z,1528901859.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:39.071Z,1528901859.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:39.439Z,1528901859.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:39.466Z,1528901859.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:39.840Z,1528901859.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:39.871Z,1528901859.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:40.235Z,1528901860.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:40.271Z,1528901860.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:40.660Z,1528901860.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:40.678Z,1528901860.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:41.060Z,1528901861.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:41.078Z,1528901861.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:41.452Z,1528901861.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:41.476Z,1528901861.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:41.839Z,1528901861.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:41.866Z,1528901861.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:42.239Z,1528901862.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:42.274Z,1528901862.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:42.643Z,1528901862.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:42.671Z,1528901862.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:43.043Z,1528901863.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:43.070Z,1528901863.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:46.156Z,1528901866.156 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T14:57:46.156Z,1528901866.156 [NAL9602] Data Fault, FailCount= 3
2018-06-13T14:57:46.156Z,1528901866.156 [NAL9602](ERROR): Data Fault
2018-06-13T14:57:46.174Z,1528901866.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:46.192Z,1528901866.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:46.306Z,1528901866.306 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T14:57:46.322Z,1528901866.322 [NAL9602](INFO): Powering down
2018-06-13T14:57:46.340Z,1528901866.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:46.398Z,1528901866.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:46.739Z,1528901866.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:46.771Z,1528901866.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:47.139Z,1528901867.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:47.178Z,1528901867.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:47.261Z,1528901867.261 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T14:57:47.261Z,1528901867.261 [NAL9602] No Fault, FailCount= 3
2018-06-13T14:57:47.531Z,1528901867.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:47.576Z,1528901867.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:47.935Z,1528901867.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:47.973Z,1528901867.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:48.334Z,1528901868.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:48.372Z,1528901868.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:48.735Z,1528901868.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:48.753Z,1528901868.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:49.139Z,1528901869.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:49.194Z,1528901869.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:49.538Z,1528901869.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:49.600Z,1528901869.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:49.937Z,1528901869.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:49.956Z,1528901869.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:50.340Z,1528901870.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:50.358Z,1528901870.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:50.740Z,1528901870.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:50.759Z,1528901870.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:51.140Z,1528901871.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:51.158Z,1528901871.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:51.540Z,1528901871.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:51.558Z,1528901871.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:51.941Z,1528901871.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:51.959Z,1528901871.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:52.340Z,1528901872.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:52.358Z,1528901872.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:52.735Z,1528901872.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:52.768Z,1528901872.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:53.140Z,1528901873.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:53.159Z,1528901873.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:53.537Z,1528901873.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:53.555Z,1528901873.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:53.939Z,1528901873.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:53.981Z,1528901873.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:54.341Z,1528901874.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:54.359Z,1528901874.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:54.737Z,1528901874.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:54.756Z,1528901874.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:55.139Z,1528901875.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:55.171Z,1528901875.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:55.541Z,1528901875.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:55.559Z,1528901875.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:55.937Z,1528901875.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:55.955Z,1528901875.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:55.955Z,1528901875.955 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 230
2018-06-13T14:57:55.955Z,1528901875.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T14:57:55.957Z,1528901875.957 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:55.957Z,1528901875.957 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 230
2018-06-13T14:57:55.957Z,1528901875.957 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T14:57:55.959Z,1528901875.959 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:55.959Z,1528901875.959 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 230
2018-06-13T14:57:55.959Z,1528901875.959 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T14:57:56.033Z,1528901876.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T14:57:56.034Z,1528901876.034 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T14:57:56.034Z,1528901876.034 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T14:57:56.342Z,1528901876.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:56.433Z,1528901876.433 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T14:57:56.433Z,1528901876.433 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 230
2018-06-13T14:57:56.434Z,1528901876.434 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T14:57:56.434Z,1528901876.434 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 230
2018-06-13T14:57:56.434Z,1528901876.434 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T14:57:56.434Z,1528901876.434 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 230
2018-06-13T14:57:56.738Z,1528901876.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:56.763Z,1528901876.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T14:57:56.763Z,1528901876.763 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:57:56.763Z,1528901876.763 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:57:56.764Z,1528901876.764 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T14:57:56.764Z,1528901876.764 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:57:56.764Z,1528901876.764 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:57:56.765Z,1528901876.765 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T14:57:56.765Z,1528901876.765 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T14:57:56.766Z,1528901876.766 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T14:57:57.135Z,1528901877.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:57.173Z,1528901877.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T14:57:57.175Z,1528901877.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:57.536Z,1528901877.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:57.567Z,1528901877.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T14:57:57.567Z,1528901877.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:57.935Z,1528901877.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:57.969Z,1528901877.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T14:57:57.970Z,1528901877.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:58.335Z,1528901878.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:58.353Z,1528901878.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T14:57:58.354Z,1528901878.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:58.739Z,1528901878.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:58.784Z,1528901878.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T14:57:58.790Z,1528901878.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:59.133Z,1528901879.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:59.152Z,1528901879.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T14:57:59.153Z,1528901879.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:59.542Z,1528901879.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:59.559Z,1528901879.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T14:57:59.560Z,1528901879.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:57:59.939Z,1528901879.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:57:59.983Z,1528901879.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T14:57:59.984Z,1528901879.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:00.341Z,1528901880.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:00.360Z,1528901880.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T14:58:00.360Z,1528901880.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:00.736Z,1528901880.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:00.755Z,1528901880.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T14:58:00.756Z,1528901880.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:01.139Z,1528901881.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:01.172Z,1528901881.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T14:58:01.181Z,1528901881.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:01.536Z,1528901881.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:01.556Z,1528901881.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T14:58:01.557Z,1528901881.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:01.940Z,1528901881.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:01.958Z,1528901881.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T14:58:01.959Z,1528901881.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:02.340Z,1528901882.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:02.365Z,1528901882.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T14:58:02.366Z,1528901882.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:02.737Z,1528901882.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:02.771Z,1528901882.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T14:58:02.772Z,1528901882.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:03.136Z,1528901883.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:03.154Z,1528901883.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T14:58:03.155Z,1528901883.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:03.530Z,1528901883.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:03.564Z,1528901883.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T14:58:03.570Z,1528901883.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:03.934Z,1528901883.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:03.967Z,1528901883.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T14:58:03.968Z,1528901883.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:04.331Z,1528901884.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:04.365Z,1528901884.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T14:58:04.366Z,1528901884.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:04.734Z,1528901884.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:04.763Z,1528901884.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T14:58:04.764Z,1528901884.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:05.136Z,1528901885.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:05.156Z,1528901885.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T14:58:05.156Z,1528901885.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:05.536Z,1528901885.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:05.554Z,1528901885.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T14:58:05.555Z,1528901885.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:05.934Z,1528901885.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:05.963Z,1528901885.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T14:58:05.964Z,1528901885.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:06.340Z,1528901886.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:06.358Z,1528901886.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T14:58:06.359Z,1528901886.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:06.736Z,1528901886.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:06.754Z,1528901886.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T14:58:06.755Z,1528901886.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:07.138Z,1528901887.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:07.161Z,1528901887.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T14:58:07.162Z,1528901887.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:07.536Z,1528901887.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:07.553Z,1528901887.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T14:58:07.554Z,1528901887.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:07.930Z,1528901887.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:07.967Z,1528901887.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T14:58:07.968Z,1528901887.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:08.333Z,1528901888.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:08.368Z,1528901888.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T14:58:08.369Z,1528901888.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:08.730Z,1528901888.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:08.757Z,1528901888.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T14:58:08.758Z,1528901888.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:09.131Z,1528901889.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:09.169Z,1528901889.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T14:58:09.170Z,1528901889.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:09.534Z,1528901889.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:09.570Z,1528901889.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T14:58:09.571Z,1528901889.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:09.930Z,1528901889.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:09.963Z,1528901889.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T14:58:09.964Z,1528901889.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:10.334Z,1528901890.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:10.361Z,1528901890.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T14:58:10.362Z,1528901890.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:10.734Z,1528901890.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:10.762Z,1528901890.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T14:58:10.763Z,1528901890.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:11.130Z,1528901891.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:11.168Z,1528901891.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T14:58:11.169Z,1528901891.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:11.534Z,1528901891.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:11.562Z,1528901891.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T14:58:11.563Z,1528901891.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:11.934Z,1528901891.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:11.970Z,1528901891.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T14:58:11.971Z,1528901891.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:12.331Z,1528901892.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:12.364Z,1528901892.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T14:58:12.365Z,1528901892.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:12.735Z,1528901892.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:12.763Z,1528901892.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T14:58:12.764Z,1528901892.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:13.135Z,1528901893.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:13.177Z,1528901893.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T14:58:13.178Z,1528901893.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:13.535Z,1528901893.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:13.563Z,1528901893.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T14:58:13.564Z,1528901893.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:13.936Z,1528901893.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:13.968Z,1528901893.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T14:58:13.969Z,1528901893.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:14.334Z,1528901894.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:14.371Z,1528901894.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T14:58:14.372Z,1528901894.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:14.730Z,1528901894.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:14.764Z,1528901894.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T14:58:14.765Z,1528901894.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:15.130Z,1528901895.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:15.164Z,1528901895.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T14:58:15.165Z,1528901895.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:15.534Z,1528901895.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:15.592Z,1528901895.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T14:58:15.597Z,1528901895.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:15.935Z,1528901895.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:15.969Z,1528901895.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:16.334Z,1528901896.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:16.369Z,1528901896.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:16.714Z,1528901896.714 [NAL9602](INFO): Powering up NAL9602
2018-06-13T14:58:16.731Z,1528901896.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:16.762Z,1528901896.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:17.130Z,1528901897.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:17.152Z,1528901897.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:17.534Z,1528901897.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:17.552Z,1528901897.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:17.935Z,1528901897.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:17.969Z,1528901897.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:18.337Z,1528901898.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:18.363Z,1528901898.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:18.738Z,1528901898.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:18.755Z,1528901898.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:19.138Z,1528901899.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:19.155Z,1528901899.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:19.533Z,1528901899.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:19.551Z,1528901899.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:19.938Z,1528901899.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:19.956Z,1528901899.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:20.338Z,1528901900.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:20.355Z,1528901900.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:20.737Z,1528901900.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:20.754Z,1528901900.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:21.138Z,1528901901.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:21.156Z,1528901901.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:21.534Z,1528901901.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:21.564Z,1528901901.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:21.936Z,1528901901.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:21.954Z,1528901901.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:22.340Z,1528901902.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:22.358Z,1528901902.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:22.739Z,1528901902.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:22.769Z,1528901902.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:23.136Z,1528901903.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:23.160Z,1528901903.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:23.541Z,1528901903.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:23.559Z,1528901903.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:23.933Z,1528901903.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:23.966Z,1528901903.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:24.336Z,1528901904.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:24.360Z,1528901904.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:24.740Z,1528901904.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:24.758Z,1528901904.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:25.138Z,1528901905.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:25.161Z,1528901905.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:25.541Z,1528901905.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:25.559Z,1528901905.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:25.938Z,1528901905.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:25.970Z,1528901905.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:26.333Z,1528901906.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:26.365Z,1528901906.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:26.740Z,1528901906.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:26.758Z,1528901906.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:27.149Z,1528901907.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:27.168Z,1528901907.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:27.518Z,1528901907.518 [NAL9602](INFO): NAL9602 initialized
2018-06-13T14:58:27.544Z,1528901907.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:27.568Z,1528901907.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:27.942Z,1528901907.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:27.959Z,1528901907.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:28.349Z,1528901908.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:28.374Z,1528901908.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:28.750Z,1528901908.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:28.799Z,1528901908.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:29.151Z,1528901909.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:29.168Z,1528901909.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:29.541Z,1528901909.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:29.559Z,1528901909.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:29.939Z,1528901909.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:29.961Z,1528901909.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:30.339Z,1528901910.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:30.364Z,1528901910.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:30.751Z,1528901910.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:30.772Z,1528901910.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:31.150Z,1528901911.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:31.172Z,1528901911.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:31.551Z,1528901911.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:31.569Z,1528901911.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:31.941Z,1528901911.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:31.959Z,1528901911.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:32.339Z,1528901912.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:32.363Z,1528901912.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:32.742Z,1528901912.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:32.760Z,1528901912.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:33.131Z,1528901913.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:33.169Z,1528901913.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:33.551Z,1528901913.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:33.570Z,1528901913.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:33.956Z,1528901913.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:33.980Z,1528901913.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:34.351Z,1528901914.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:34.370Z,1528901914.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:34.735Z,1528901914.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:34.769Z,1528901914.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:35.136Z,1528901915.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:35.174Z,1528901915.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:35.535Z,1528901915.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:35.572Z,1528901915.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:35.936Z,1528901915.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:35.971Z,1528901915.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:36.339Z,1528901916.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:36.369Z,1528901916.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:36.756Z,1528901916.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:36.774Z,1528901916.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:37.154Z,1528901917.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:37.178Z,1528901917.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:37.557Z,1528901917.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:37.575Z,1528901917.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:37.932Z,1528901917.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:37.968Z,1528901917.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:38.335Z,1528901918.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:38.368Z,1528901918.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:38.736Z,1528901918.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:38.771Z,1528901918.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:39.135Z,1528901919.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:39.169Z,1528901919.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:39.553Z,1528901919.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:39.571Z,1528901919.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:39.957Z,1528901919.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:39.975Z,1528901919.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:40.342Z,1528901920.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:40.370Z,1528901920.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:40.735Z,1528901920.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:40.775Z,1528901920.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:41.135Z,1528901921.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:41.178Z,1528901921.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:41.535Z,1528901921.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:41.573Z,1528901921.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:41.936Z,1528901921.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:41.972Z,1528901921.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:42.335Z,1528901922.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:42.369Z,1528901922.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:42.755Z,1528901922.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:42.774Z,1528901922.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:43.159Z,1528901923.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:43.177Z,1528901923.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:46.263Z,1528901926.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:46.282Z,1528901926.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:46.381Z,1528901926.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:46.432Z,1528901926.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:46.791Z,1528901926.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:46.818Z,1528901926.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:47.187Z,1528901927.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:47.220Z,1528901927.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:47.591Z,1528901927.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:47.618Z,1528901927.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:47.992Z,1528901927.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:48.024Z,1528901928.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:48.406Z,1528901928.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:48.447Z,1528901928.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:48.801Z,1528901928.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:48.836Z,1528901928.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:49.197Z,1528901929.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:49.225Z,1528901929.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:49.588Z,1528901929.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:49.626Z,1528901929.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:49.987Z,1528901929.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:50.006Z,1528901930.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:50.405Z,1528901930.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:50.432Z,1528901930.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:50.805Z,1528901930.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:50.834Z,1528901930.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:51.205Z,1528901931.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:51.233Z,1528901931.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:51.592Z,1528901931.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:51.609Z,1528901931.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:51.989Z,1528901931.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:52.012Z,1528901932.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:52.401Z,1528901932.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:52.419Z,1528901932.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:52.801Z,1528901932.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:52.819Z,1528901932.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:53.202Z,1528901933.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:53.219Z,1528901933.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:53.609Z,1528901933.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:53.643Z,1528901933.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:53.992Z,1528901933.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:54.017Z,1528901934.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:54.401Z,1528901934.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:54.448Z,1528901934.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:54.802Z,1528901934.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:54.820Z,1528901934.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:55.198Z,1528901935.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:55.216Z,1528901935.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:55.599Z,1528901935.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:55.616Z,1528901935.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:55.994Z,1528901935.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:56.012Z,1528901936.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:56.398Z,1528901936.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:56.416Z,1528901936.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:56.802Z,1528901936.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:56.820Z,1528901936.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:57.198Z,1528901937.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:57.216Z,1528901937.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:57.593Z,1528901937.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:57.611Z,1528901937.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:57.994Z,1528901937.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:58.012Z,1528901938.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:58.386Z,1528901938.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:58.419Z,1528901938.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:58.802Z,1528901938.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:58.844Z,1528901938.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:59.203Z,1528901939.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:59.228Z,1528901939.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:59.598Z,1528901939.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:58:59.633Z,1528901939.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:58:59.991Z,1528901939.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:00.025Z,1528901940.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:00.387Z,1528901940.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:00.422Z,1528901940.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:00.784Z,1528901940.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:00.827Z,1528901940.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:01.187Z,1528901941.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:01.223Z,1528901941.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:01.609Z,1528901941.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:01.628Z,1528901941.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:02.008Z,1528901942.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:02.026Z,1528901942.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:02.404Z,1528901942.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:02.428Z,1528901942.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:02.787Z,1528901942.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:02.818Z,1528901942.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:03.187Z,1528901943.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:03.221Z,1528901943.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:03.587Z,1528901943.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:03.625Z,1528901943.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:03.988Z,1528901943.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:04.006Z,1528901944.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:04.387Z,1528901944.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:04.405Z,1528901944.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:04.805Z,1528901944.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:04.832Z,1528901944.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:05.205Z,1528901945.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:05.234Z,1528901945.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:05.605Z,1528901945.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:05.633Z,1528901945.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:05.991Z,1528901945.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:06.008Z,1528901946.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:06.392Z,1528901946.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:06.410Z,1528901946.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:06.787Z,1528901946.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:06.811Z,1528901946.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:07.192Z,1528901947.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:07.247Z,1528901947.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:07.602Z,1528901947.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:07.620Z,1528901947.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:07.998Z,1528901947.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:08.020Z,1528901948.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:08.398Z,1528901948.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:08.417Z,1528901948.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:08.791Z,1528901948.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:08.824Z,1528901948.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:09.193Z,1528901949.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:09.211Z,1528901949.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:09.591Z,1528901949.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:09.613Z,1528901949.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:09.993Z,1528901949.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:10.016Z,1528901950.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:10.387Z,1528901950.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:10.410Z,1528901950.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:10.798Z,1528901950.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:10.816Z,1528901950.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:11.199Z,1528901951.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:11.217Z,1528901951.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:11.598Z,1528901951.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:11.616Z,1528901951.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:11.991Z,1528901951.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:12.022Z,1528901952.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:12.391Z,1528901952.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:12.424Z,1528901952.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:12.793Z,1528901952.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:12.812Z,1528901952.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:13.191Z,1528901953.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:13.222Z,1528901953.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:13.603Z,1528901953.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:13.621Z,1528901953.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:14.003Z,1528901954.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:14.021Z,1528901954.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:14.400Z,1528901954.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:14.417Z,1528901954.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:14.794Z,1528901954.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:14.825Z,1528901954.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:15.194Z,1528901955.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:15.213Z,1528901955.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:15.591Z,1528901955.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:15.614Z,1528901955.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:15.995Z,1528901955.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:16.026Z,1528901956.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:16.386Z,1528901956.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:16.411Z,1528901956.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:16.802Z,1528901956.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:16.820Z,1528901956.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:17.205Z,1528901957.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:17.223Z,1528901957.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:17.603Z,1528901957.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:17.621Z,1528901957.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:17.986Z,1528901957.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:18.020Z,1528901958.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:18.395Z,1528901958.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:18.413Z,1528901958.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:18.787Z,1528901958.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:18.814Z,1528901958.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:19.194Z,1528901959.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:19.211Z,1528901959.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:19.604Z,1528901959.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:19.628Z,1528901959.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:20.001Z,1528901960.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:20.020Z,1528901960.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:20.402Z,1528901960.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:20.420Z,1528901960.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:20.795Z,1528901960.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:20.814Z,1528901960.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:21.187Z,1528901961.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:21.211Z,1528901961.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:21.591Z,1528901961.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:21.622Z,1528901961.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:21.995Z,1528901961.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:22.013Z,1528901962.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:22.383Z,1528901962.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:22.422Z,1528901962.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:22.802Z,1528901962.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:22.827Z,1528901962.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:23.207Z,1528901963.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:23.236Z,1528901963.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:23.603Z,1528901963.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:23.621Z,1528901963.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:23.987Z,1528901963.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:24.023Z,1528901964.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:24.387Z,1528901964.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:24.428Z,1528901964.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:24.787Z,1528901964.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:24.820Z,1528901964.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:25.187Z,1528901965.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:25.221Z,1528901965.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:25.601Z,1528901965.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:25.631Z,1528901965.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:26.001Z,1528901966.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:26.035Z,1528901966.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:26.397Z,1528901966.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:26.431Z,1528901966.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:26.787Z,1528901966.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:26.806Z,1528901966.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:27.187Z,1528901967.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:27.231Z,1528901967.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:27.591Z,1528901967.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:27.609Z,1528901967.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:27.990Z,1528901967.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:28.016Z,1528901968.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:28.388Z,1528901968.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:28.406Z,1528901968.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:28.801Z,1528901968.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:28.819Z,1528901968.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:29.201Z,1528901969.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:29.240Z,1528901969.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:29.598Z,1528901969.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:29.616Z,1528901969.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:29.992Z,1528901969.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:30.016Z,1528901970.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:30.394Z,1528901970.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:30.412Z,1528901970.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:30.790Z,1528901970.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:30.808Z,1528901970.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:31.192Z,1528901971.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:31.210Z,1528901971.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:31.602Z,1528901971.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:31.620Z,1528901971.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:31.997Z,1528901971.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:32.020Z,1528901972.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:32.401Z,1528901972.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:32.419Z,1528901972.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:32.794Z,1528901972.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:32.812Z,1528901972.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:33.187Z,1528901973.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:33.230Z,1528901973.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:33.591Z,1528901973.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:33.622Z,1528901973.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:33.998Z,1528901973.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:34.016Z,1528901974.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:34.395Z,1528901974.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:34.413Z,1528901974.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:34.798Z,1528901974.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:34.816Z,1528901974.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:35.198Z,1528901975.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:35.224Z,1528901975.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:35.600Z,1528901975.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:35.624Z,1528901975.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:35.991Z,1528901975.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:36.015Z,1528901976.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:36.394Z,1528901976.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:36.420Z,1528901976.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:36.790Z,1528901976.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:36.808Z,1528901976.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:37.191Z,1528901977.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:37.217Z,1528901977.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:37.606Z,1528901977.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:37.625Z,1528901977.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:38.003Z,1528901978.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:38.021Z,1528901978.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:38.398Z,1528901978.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:38.421Z,1528901978.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:38.794Z,1528901978.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:38.816Z,1528901978.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:39.194Z,1528901979.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:39.311Z,1528901979.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:39.591Z,1528901979.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:39.626Z,1528901979.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:39.988Z,1528901979.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:40.019Z,1528901980.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:40.383Z,1528901980.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:40.410Z,1528901980.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:40.803Z,1528901980.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:40.821Z,1528901980.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:41.205Z,1528901981.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:41.223Z,1528901981.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:41.603Z,1528901981.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:41.621Z,1528901981.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:41.987Z,1528901981.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:42.017Z,1528901982.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:42.387Z,1528901982.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:42.428Z,1528901982.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:42.787Z,1528901982.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:42.823Z,1528901982.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:43.187Z,1528901983.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:43.220Z,1528901983.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:43.608Z,1528901983.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:43.626Z,1528901983.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:44.008Z,1528901984.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:44.026Z,1528901984.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:44.401Z,1528901984.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:44.424Z,1528901984.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:44.787Z,1528901984.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:44.821Z,1528901984.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:45.187Z,1528901985.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:45.255Z,1528901985.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:45.592Z,1528901985.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:45.609Z,1528901985.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:45.995Z,1528901985.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:46.013Z,1528901986.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:49.098Z,1528901989.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:49.117Z,1528901989.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:49.261Z,1528901989.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:49.297Z,1528901989.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:49.661Z,1528901989.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:49.696Z,1528901989.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:50.065Z,1528901990.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:50.092Z,1528901990.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:50.446Z,1528901990.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:50.464Z,1528901990.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:50.847Z,1528901990.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:50.865Z,1528901990.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:51.242Z,1528901991.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:51.260Z,1528901991.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:51.657Z,1528901991.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:51.691Z,1528901991.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:52.058Z,1528901992.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:52.076Z,1528901992.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:52.450Z,1528901992.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:52.472Z,1528901992.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:52.848Z,1528901992.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:52.866Z,1528901992.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:53.249Z,1528901993.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:53.267Z,1528901993.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:53.643Z,1528901993.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:53.666Z,1528901993.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:54.048Z,1528901994.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:54.069Z,1528901994.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:54.449Z,1528901994.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:54.467Z,1528901994.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:54.853Z,1528901994.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:54.876Z,1528901994.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:55.257Z,1528901995.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:55.275Z,1528901995.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:55.657Z,1528901995.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:55.676Z,1528901995.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:56.043Z,1528901996.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:56.065Z,1528901996.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:56.448Z,1528901996.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:56.465Z,1528901996.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:56.850Z,1528901996.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:56.868Z,1528901996.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:57.248Z,1528901997.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:57.266Z,1528901997.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:57.653Z,1528901997.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:57.671Z,1528901997.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:58.057Z,1528901998.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:58.079Z,1528901998.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:58.455Z,1528901998.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:58.474Z,1528901998.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:58.847Z,1528901998.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:58.877Z,1528901998.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:59.250Z,1528901999.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:59.268Z,1528901999.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T14:59:59.643Z,1528901999.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T14:59:59.667Z,1528901999.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:00.041Z,1528902000.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:00.076Z,1528902000.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:00.447Z,1528902000.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:00.472Z,1528902000.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:00.859Z,1528902000.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:00.878Z,1528902000.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:01.259Z,1528902001.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:01.277Z,1528902001.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:01.657Z,1528902001.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:01.684Z,1528902001.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:02.039Z,1528902002.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:02.076Z,1528902002.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:02.447Z,1528902002.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:02.472Z,1528902002.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:02.851Z,1528902002.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:02.869Z,1528902002.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:03.239Z,1528902003.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:03.276Z,1528902003.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:03.661Z,1528902003.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:03.679Z,1528902003.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:04.063Z,1528902004.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:04.082Z,1528902004.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:04.456Z,1528902004.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:04.475Z,1528902004.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:04.847Z,1528902004.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:04.871Z,1528902004.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:05.239Z,1528902005.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:05.268Z,1528902005.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:05.639Z,1528902005.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:05.677Z,1528902005.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:06.047Z,1528902006.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:06.082Z,1528902006.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:06.443Z,1528902006.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:06.471Z,1528902006.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:06.859Z,1528902006.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:06.877Z,1528902006.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:07.263Z,1528902007.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:07.281Z,1528902007.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:07.659Z,1528902007.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:07.681Z,1528902007.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:08.039Z,1528902008.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:08.066Z,1528902008.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:08.444Z,1528902008.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:08.476Z,1528902008.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:08.839Z,1528902008.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:08.876Z,1528902008.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:09.239Z,1528902009.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:09.271Z,1528902009.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:09.659Z,1528902009.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:09.678Z,1528902009.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:10.059Z,1528902010.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:10.077Z,1528902010.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:10.456Z,1528902010.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:10.475Z,1528902010.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:10.843Z,1528902010.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:10.876Z,1528902010.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:11.239Z,1528902011.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:11.276Z,1528902011.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:11.639Z,1528902011.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:11.675Z,1528902011.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:12.044Z,1528902012.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:12.076Z,1528902012.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:12.439Z,1528902012.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:12.477Z,1528902012.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:12.849Z,1528902012.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:12.877Z,1528902012.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:13.264Z,1528902013.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:13.282Z,1528902013.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:13.653Z,1528902013.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:13.682Z,1528902013.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:14.039Z,1528902014.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:14.076Z,1528902014.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:14.443Z,1528902014.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:14.460Z,1528902014.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:14.843Z,1528902014.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:14.861Z,1528902014.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:15.248Z,1528902015.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:15.286Z,1528902015.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:15.657Z,1528902015.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:15.691Z,1528902015.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:16.061Z,1528902016.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:16.090Z,1528902016.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:16.457Z,1528902016.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:16.495Z,1528902016.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:16.847Z,1528902016.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:16.864Z,1528902016.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:17.246Z,1528902017.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:17.264Z,1528902017.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:17.646Z,1528902017.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:17.664Z,1528902017.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:18.051Z,1528902018.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:18.085Z,1528902018.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:18.442Z,1528902018.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:18.464Z,1528902018.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:18.857Z,1528902018.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:18.891Z,1528902018.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:19.257Z,1528902019.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:19.276Z,1528902019.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:19.657Z,1528902019.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:19.680Z,1528902019.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:20.047Z,1528902020.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:20.064Z,1528902020.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:20.448Z,1528902020.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:20.466Z,1528902020.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:20.846Z,1528902020.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:20.872Z,1528902020.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:21.248Z,1528902021.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:21.266Z,1528902021.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:21.653Z,1528902021.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:21.672Z,1528902021.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:22.053Z,1528902022.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:22.076Z,1528902022.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:22.454Z,1528902022.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:22.472Z,1528902022.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:22.848Z,1528902022.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:22.866Z,1528902022.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:23.246Z,1528902023.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:23.264Z,1528902023.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:23.648Z,1528902023.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:23.666Z,1528902023.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:24.048Z,1528902024.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:24.069Z,1528902024.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:24.448Z,1528902024.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:24.466Z,1528902024.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:24.857Z,1528902024.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:24.875Z,1528902024.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:25.257Z,1528902025.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:25.275Z,1528902025.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:25.653Z,1528902025.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:25.676Z,1528902025.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:26.048Z,1528902026.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:26.066Z,1528902026.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:26.448Z,1528902026.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:26.465Z,1528902026.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:26.848Z,1528902026.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:26.878Z,1528902026.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:27.249Z,1528902027.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:27.267Z,1528902027.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:27.654Z,1528902027.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:27.676Z,1528902027.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:28.057Z,1528902028.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:28.080Z,1528902028.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:28.458Z,1528902028.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:28.475Z,1528902028.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:28.849Z,1528902028.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:28.867Z,1528902028.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:29.250Z,1528902029.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:29.267Z,1528902029.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:29.649Z,1528902029.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:29.667Z,1528902029.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:30.050Z,1528902030.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:30.067Z,1528902030.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:30.447Z,1528902030.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:30.471Z,1528902030.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:30.854Z,1528902030.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:30.877Z,1528902030.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:31.257Z,1528902031.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:31.275Z,1528902031.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:31.658Z,1528902031.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:31.675Z,1528902031.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:32.049Z,1528902032.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:32.067Z,1528902032.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:32.447Z,1528902032.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:32.469Z,1528902032.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:32.850Z,1528902032.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:32.868Z,1528902032.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:33.249Z,1528902033.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:33.267Z,1528902033.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:33.655Z,1528902033.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:33.680Z,1528902033.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:34.057Z,1528902034.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:34.075Z,1528902034.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:34.453Z,1528902034.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:34.471Z,1528902034.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:34.849Z,1528902034.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:34.866Z,1528902034.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:35.250Z,1528902035.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:35.267Z,1528902035.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:35.649Z,1528902035.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:35.667Z,1528902035.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:36.047Z,1528902036.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:36.078Z,1528902036.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:36.453Z,1528902036.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:36.471Z,1528902036.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:36.854Z,1528902036.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:36.872Z,1528902036.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:37.257Z,1528902037.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:37.275Z,1528902037.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:37.657Z,1528902037.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:37.675Z,1528902037.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:38.049Z,1528902038.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:38.067Z,1528902038.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:38.448Z,1528902038.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:38.483Z,1528902038.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:38.852Z,1528902038.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:38.876Z,1528902038.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:39.246Z,1528902039.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:39.264Z,1528902039.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:39.657Z,1528902039.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:39.675Z,1528902039.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:40.057Z,1528902040.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:40.075Z,1528902040.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:40.455Z,1528902040.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:40.480Z,1528902040.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:40.847Z,1528902040.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:40.878Z,1528902040.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:41.247Z,1528902041.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:41.276Z,1528902041.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:41.650Z,1528902041.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:41.672Z,1528902041.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:42.048Z,1528902042.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:42.079Z,1528902042.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:42.447Z,1528902042.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:42.477Z,1528902042.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:42.855Z,1528902042.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:42.880Z,1528902042.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:43.258Z,1528902043.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:43.284Z,1528902043.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:46.377Z,1528902046.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:46.413Z,1528902046.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:46.525Z,1528902046.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:46.564Z,1528902046.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:46.932Z,1528902046.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:46.959Z,1528902046.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:47.332Z,1528902047.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:47.361Z,1528902047.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:47.747Z,1528902047.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:47.766Z,1528902047.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:48.146Z,1528902048.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:48.164Z,1528902048.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:48.550Z,1528902048.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:48.567Z,1528902048.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:48.924Z,1528902048.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:48.961Z,1528902048.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:49.327Z,1528902049.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:49.363Z,1528902049.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:49.728Z,1528902049.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:49.754Z,1528902049.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:50.124Z,1528902050.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:50.142Z,1528902050.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:50.527Z,1528902050.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:50.546Z,1528902050.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:50.946Z,1528902050.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:50.980Z,1528902050.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:51.337Z,1528902051.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:51.375Z,1528902051.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:51.741Z,1528902051.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:51.775Z,1528902051.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:52.131Z,1528902052.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:52.150Z,1528902052.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:52.524Z,1528902052.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:52.542Z,1528902052.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:52.931Z,1528902052.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:52.949Z,1528902052.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:53.331Z,1528902053.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:53.348Z,1528902053.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:53.734Z,1528902053.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:53.752Z,1528902053.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:54.137Z,1528902054.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:54.155Z,1528902054.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:54.541Z,1528902054.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:54.559Z,1528902054.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:54.929Z,1528902054.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:54.947Z,1528902054.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:55.332Z,1528902055.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:55.350Z,1528902055.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:55.734Z,1528902055.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:55.752Z,1528902055.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:56.130Z,1528902056.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:56.148Z,1528902056.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:56.532Z,1528902056.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:56.550Z,1528902056.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:56.942Z,1528902056.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:56.960Z,1528902056.960 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:56.960Z,1528902056.960 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 231
2018-06-13T15:00:56.960Z,1528902056.960 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:00:56.962Z,1528902056.962 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:56.962Z,1528902056.962 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 231
2018-06-13T15:00:56.962Z,1528902056.962 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:00:56.964Z,1528902056.964 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:56.964Z,1528902056.964 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 231
2018-06-13T15:00:56.964Z,1528902056.964 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:00:57.065Z,1528902057.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:00:57.065Z,1528902057.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:00:57.065Z,1528902057.065 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:00:57.342Z,1528902057.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:57.433Z,1528902057.433 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:00:57.433Z,1528902057.433 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 231
2018-06-13T15:00:57.434Z,1528902057.434 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:00:57.434Z,1528902057.434 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 231
2018-06-13T15:00:57.434Z,1528902057.434 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:00:57.434Z,1528902057.434 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 231
2018-06-13T15:00:57.739Z,1528902057.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:57.756Z,1528902057.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:00:57.756Z,1528902057.756 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:00:57.757Z,1528902057.757 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:00:57.757Z,1528902057.757 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:00:57.758Z,1528902057.758 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:00:57.758Z,1528902057.758 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:00:57.758Z,1528902057.758 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:00:57.759Z,1528902057.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:00:57.759Z,1528902057.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:00:58.139Z,1528902058.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:58.163Z,1528902058.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:00:58.164Z,1528902058.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:58.523Z,1528902058.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:58.550Z,1528902058.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:00:58.551Z,1528902058.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:58.931Z,1528902058.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:58.961Z,1528902058.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:00:58.962Z,1528902058.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:59.327Z,1528902059.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:59.355Z,1528902059.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:00:59.356Z,1528902059.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:00:59.743Z,1528902059.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:00:59.760Z,1528902059.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:00:59.762Z,1528902059.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:00.146Z,1528902060.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:00.167Z,1528902060.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:01:00.168Z,1528902060.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:00.544Z,1528902060.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:00.562Z,1528902060.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:01:00.563Z,1528902060.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:00.923Z,1528902060.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:00.962Z,1528902060.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:01:00.963Z,1528902060.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:01.327Z,1528902061.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:01.364Z,1528902061.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:01:01.369Z,1528902061.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:01.727Z,1528902061.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:01.761Z,1528902061.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:01:01.762Z,1528902061.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:02.128Z,1528902062.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:02.146Z,1528902062.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:01:02.147Z,1528902062.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:02.527Z,1528902062.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:02.552Z,1528902062.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:01:02.552Z,1528902062.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:02.945Z,1528902062.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:02.974Z,1528902062.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:01:02.975Z,1528902062.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:03.345Z,1528902063.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:03.379Z,1528902063.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:01:03.380Z,1528902063.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:03.737Z,1528902063.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:03.763Z,1528902063.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:01:03.764Z,1528902063.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:04.130Z,1528902064.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:04.148Z,1528902064.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:01:04.149Z,1528902064.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:04.528Z,1528902064.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:04.546Z,1528902064.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:01:04.547Z,1528902064.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:04.932Z,1528902064.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:04.956Z,1528902064.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:01:04.957Z,1528902064.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:05.333Z,1528902065.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:05.350Z,1528902065.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:01:05.351Z,1528902065.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:05.735Z,1528902065.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:05.752Z,1528902065.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:01:05.753Z,1528902065.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:06.145Z,1528902066.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:06.183Z,1528902066.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:01:06.184Z,1528902066.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:06.541Z,1528902066.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:06.564Z,1528902066.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:01:06.581Z,1528902066.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:06.934Z,1528902066.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:06.952Z,1528902066.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:01:06.953Z,1528902066.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:07.331Z,1528902067.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:07.362Z,1528902067.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:01:07.363Z,1528902067.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:07.734Z,1528902067.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:07.760Z,1528902067.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:01:07.760Z,1528902067.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:08.134Z,1528902068.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:08.156Z,1528902068.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T15:01:08.156Z,1528902068.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:08.530Z,1528902068.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:08.554Z,1528902068.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T15:01:08.555Z,1528902068.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:08.949Z,1528902068.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:08.967Z,1528902068.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T15:01:08.968Z,1528902068.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:09.347Z,1528902069.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:09.364Z,1528902069.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T15:01:09.365Z,1528902069.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:09.747Z,1528902069.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:09.772Z,1528902069.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T15:01:09.773Z,1528902069.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:10.134Z,1528902070.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:10.152Z,1528902070.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T15:01:10.153Z,1528902070.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:10.523Z,1528902070.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:10.560Z,1528902070.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T15:01:10.561Z,1528902070.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:10.928Z,1528902070.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:10.963Z,1528902070.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T15:01:10.964Z,1528902070.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:11.327Z,1528902071.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:11.367Z,1528902071.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T15:01:11.368Z,1528902071.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:11.744Z,1528902071.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:11.763Z,1528902071.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T15:01:11.763Z,1528902071.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:12.147Z,1528902072.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:12.164Z,1528902072.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T15:01:12.166Z,1528902072.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:12.548Z,1528902072.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:12.566Z,1528902072.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:01:12.567Z,1528902072.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:12.927Z,1528902072.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:12.960Z,1528902072.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:01:12.961Z,1528902072.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:13.327Z,1528902073.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:13.363Z,1528902073.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T15:01:13.363Z,1528902073.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:13.727Z,1528902073.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:13.766Z,1528902073.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T15:01:13.767Z,1528902073.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:14.128Z,1528902074.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:14.154Z,1528902074.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:01:14.155Z,1528902074.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:14.527Z,1528902074.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:14.554Z,1528902074.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:01:14.555Z,1528902074.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:14.949Z,1528902074.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:14.966Z,1528902074.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:01:14.967Z,1528902074.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:15.340Z,1528902075.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:15.366Z,1528902075.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T15:01:15.366Z,1528902075.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:15.743Z,1528902075.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:15.764Z,1528902075.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T15:01:15.766Z,1528902075.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:16.127Z,1528902076.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:16.169Z,1528902076.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T15:01:16.170Z,1528902076.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:16.527Z,1528902076.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:16.563Z,1528902076.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T15:01:16.564Z,1528902076.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:16.928Z,1528902076.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:16.968Z,1528902076.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:17.327Z,1528902077.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:17.356Z,1528902077.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:17.743Z,1528902077.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:17.762Z,1528902077.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:18.147Z,1528902078.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:18.165Z,1528902078.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:18.548Z,1528902078.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:18.566Z,1528902078.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:18.927Z,1528902078.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:18.960Z,1528902078.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:19.331Z,1528902079.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:19.366Z,1528902079.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:19.727Z,1528902079.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:19.762Z,1528902079.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:20.128Z,1528902080.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:20.158Z,1528902080.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:20.527Z,1528902080.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:20.560Z,1528902080.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:20.941Z,1528902080.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:20.970Z,1528902080.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:21.341Z,1528902081.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:21.376Z,1528902081.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:21.737Z,1528902081.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:21.764Z,1528902081.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:22.127Z,1528902082.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:22.161Z,1528902082.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:22.527Z,1528902082.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:22.545Z,1528902082.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:22.931Z,1528902082.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:22.950Z,1528902082.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:23.330Z,1528902083.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:23.349Z,1528902083.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:23.741Z,1528902083.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:23.775Z,1528902083.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:24.145Z,1528902084.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:24.179Z,1528902084.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:24.542Z,1528902084.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:24.559Z,1528902084.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:24.933Z,1528902084.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:24.951Z,1528902084.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:25.332Z,1528902085.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:25.350Z,1528902085.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:25.734Z,1528902085.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:25.752Z,1528902085.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:26.134Z,1528902086.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:26.152Z,1528902086.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:26.532Z,1528902086.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:26.550Z,1528902086.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:26.945Z,1528902086.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:26.963Z,1528902086.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:27.341Z,1528902087.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:27.359Z,1528902087.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:27.738Z,1528902087.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:27.756Z,1528902087.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:28.134Z,1528902088.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:28.173Z,1528902088.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:28.535Z,1528902088.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:28.552Z,1528902088.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:28.932Z,1528902088.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:28.956Z,1528902088.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:29.331Z,1528902089.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:29.357Z,1528902089.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:29.743Z,1528902089.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:29.760Z,1528902089.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:30.142Z,1528902090.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:30.161Z,1528902090.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:30.543Z,1528902090.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:30.568Z,1528902090.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:30.935Z,1528902090.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:30.953Z,1528902090.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:31.331Z,1528902091.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:31.354Z,1528902091.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:31.734Z,1528902091.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:31.752Z,1528902091.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:32.133Z,1528902092.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:32.151Z,1528902092.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:32.531Z,1528902092.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:32.554Z,1528902092.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:32.948Z,1528902092.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:32.967Z,1528902092.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:33.346Z,1528902093.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:33.364Z,1528902093.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:33.743Z,1528902093.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:33.761Z,1528902093.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:34.134Z,1528902094.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:34.152Z,1528902094.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:34.523Z,1528902094.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:34.557Z,1528902094.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:34.928Z,1528902094.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:34.959Z,1528902094.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:35.327Z,1528902095.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:35.365Z,1528902095.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:35.747Z,1528902095.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:35.765Z,1528902095.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:36.147Z,1528902096.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:36.164Z,1528902096.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:36.548Z,1528902096.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:36.566Z,1528902096.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:36.927Z,1528902096.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:36.959Z,1528902096.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:37.327Z,1528902097.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:37.359Z,1528902097.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:37.728Z,1528902097.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:37.766Z,1528902097.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:38.128Z,1528902098.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:38.163Z,1528902098.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:38.527Z,1528902098.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:38.563Z,1528902098.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:38.947Z,1528902098.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:38.982Z,1528902098.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:39.348Z,1528902099.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:39.366Z,1528902099.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:39.738Z,1528902099.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:39.772Z,1528902099.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:40.127Z,1528902100.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:40.161Z,1528902100.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:40.527Z,1528902100.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:40.561Z,1528902100.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:40.927Z,1528902100.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:40.945Z,1528902100.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:41.327Z,1528902101.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:41.345Z,1528902101.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:41.741Z,1528902101.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:41.775Z,1528902101.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:42.141Z,1528902102.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:42.174Z,1528902102.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:42.541Z,1528902102.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:42.576Z,1528902102.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:42.931Z,1528902102.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:42.949Z,1528902102.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:43.331Z,1528902103.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:43.348Z,1528902103.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:43.731Z,1528902103.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:43.750Z,1528902103.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:43.765Z,1528902103.765 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T14:56:43.4Z
2018-06-13T15:01:43.765Z,1528902103.765 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T15:01:43.765Z,1528902103.765 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T15:01:44.134Z,1528902104.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:44.151Z,1528902104.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:45.299Z,1528902105.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:45.338Z,1528902105.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:45.457Z,1528902105.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:45.500Z,1528902105.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:45.875Z,1528902105.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:45.893Z,1528902105.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:46.272Z,1528902106.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:46.290Z,1528902106.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:46.655Z,1528902106.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:46.687Z,1528902106.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:49.807Z,1528902109.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:49.836Z,1528902109.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:49.933Z,1528902109.933 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0268.lzma
2018-06-13T15:01:49.954Z,1528902109.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:50.004Z,1528902110.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:50.380Z,1528902110.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:50.399Z,1528902110.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:50.734Z,1528902110.734 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0268.lzma.bak
2018-06-13T15:01:50.734Z,1528902110.734 [DataOverHttps](INFO): SBD MOMSN=8329420
2018-06-13T15:01:50.793Z,1528902110.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:50.811Z,1528902110.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:52.686Z,1528902112.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:52.704Z,1528902112.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:52.811Z,1528902112.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:52.843Z,1528902112.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:53.207Z,1528902113.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:53.244Z,1528902113.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:53.608Z,1528902113.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:53.644Z,1528902113.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:54.012Z,1528902114.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:54.041Z,1528902114.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:57.140Z,1528902117.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:57.164Z,1528902117.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:57.326Z,1528902117.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:57.349Z,1528902117.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:57.731Z,1528902117.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:57.749Z,1528902117.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:58.126Z,1528902118.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:58.161Z,1528902118.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:58.511Z,1528902118.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:58.543Z,1528902118.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:01:58.912Z,1528902118.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:01:58.942Z,1528902118.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:02.038Z,1528902122.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:02.056Z,1528902122.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:02.144Z,1528902122.144 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180613T032335/Express0269.lzma
2018-06-13T15:02:02.183Z,1528902122.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:02.219Z,1528902122.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:02.587Z,1528902122.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:02.606Z,1528902122.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:02.942Z,1528902122.942 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0269.lzma.bak
2018-06-13T15:02:02.942Z,1528902122.942 [DataOverHttps](INFO): SBD MOMSN=8329422
2018-06-13T15:02:02.993Z,1528902122.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:03.012Z,1528902123.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:04.884Z,1528902124.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:04.902Z,1528902124.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:04.905Z,1528902124.905 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T15:02:04.905Z,1528902124.905 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T15:02:04.905Z,1528902124.905 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T15:02:05.004Z,1528902125.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:05.056Z,1528902125.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:05.429Z,1528902125.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:05.457Z,1528902125.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:05.821Z,1528902125.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:05.854Z,1528902125.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:06.230Z,1528902126.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:06.264Z,1528902126.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:09.350Z,1528902129.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:09.368Z,1528902129.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:09.471Z,1528902129.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:09.519Z,1528902129.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:09.895Z,1528902129.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:09.914Z,1528902129.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:10.304Z,1528902130.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:10.322Z,1528902130.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:10.691Z,1528902130.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:10.710Z,1528902130.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:11.075Z,1528902131.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:11.111Z,1528902131.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:11.475Z,1528902131.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:11.513Z,1528902131.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:11.871Z,1528902131.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:11.908Z,1528902131.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:12.276Z,1528902132.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:12.306Z,1528902132.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:12.675Z,1528902132.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:12.709Z,1528902132.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:13.081Z,1528902133.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:13.109Z,1528902133.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:13.495Z,1528902133.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:13.513Z,1528902133.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:13.896Z,1528902133.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:13.914Z,1528902133.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:14.275Z,1528902134.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:14.308Z,1528902134.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:14.675Z,1528902134.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:14.711Z,1528902134.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:15.080Z,1528902135.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:15.109Z,1528902135.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:15.471Z,1528902135.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:15.508Z,1528902135.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:15.897Z,1528902135.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:15.915Z,1528902135.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:16.285Z,1528902136.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:16.324Z,1528902136.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:16.682Z,1528902136.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:16.709Z,1528902136.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:17.076Z,1528902137.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:17.110Z,1528902137.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:17.476Z,1528902137.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:17.509Z,1528902137.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:17.871Z,1528902137.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:17.896Z,1528902137.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:18.281Z,1528902138.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:18.299Z,1528902138.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:18.674Z,1528902138.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:18.696Z,1528902138.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:19.087Z,1528902139.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:19.121Z,1528902139.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:19.490Z,1528902139.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:19.508Z,1528902139.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:19.889Z,1528902139.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:19.908Z,1528902139.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:20.275Z,1528902140.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:20.313Z,1528902140.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:20.674Z,1528902140.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:20.709Z,1528902140.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:21.078Z,1528902141.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:21.096Z,1528902141.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:21.475Z,1528902141.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:21.498Z,1528902141.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:21.890Z,1528902141.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:21.908Z,1528902141.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:22.290Z,1528902142.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:22.308Z,1528902142.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:22.687Z,1528902142.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:22.705Z,1528902142.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:23.079Z,1528902143.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:23.102Z,1528902143.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:23.481Z,1528902143.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:23.499Z,1528902143.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:23.874Z,1528902143.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:23.908Z,1528902143.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:24.279Z,1528902144.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:24.302Z,1528902144.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:24.678Z,1528902144.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:24.695Z,1528902144.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:25.090Z,1528902145.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:25.108Z,1528902145.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:25.490Z,1528902145.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:25.512Z,1528902145.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:25.890Z,1528902145.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:25.909Z,1528902145.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:26.281Z,1528902146.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:26.299Z,1528902146.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:26.682Z,1528902146.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:26.700Z,1528902146.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:27.078Z,1528902147.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:27.100Z,1528902147.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:27.474Z,1528902147.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:27.506Z,1528902147.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:27.890Z,1528902147.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:27.908Z,1528902147.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:28.290Z,1528902148.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:28.308Z,1528902148.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:28.691Z,1528902148.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:28.709Z,1528902148.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:29.074Z,1528902149.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:29.107Z,1528902149.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:29.482Z,1528902149.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:29.499Z,1528902149.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:29.875Z,1528902149.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:29.898Z,1528902149.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:30.279Z,1528902150.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:30.302Z,1528902150.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:30.677Z,1528902150.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:30.701Z,1528902150.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:31.090Z,1528902151.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:31.108Z,1528902151.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:31.493Z,1528902151.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:31.511Z,1528902151.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:31.890Z,1528902151.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:31.912Z,1528902151.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:32.276Z,1528902152.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:32.295Z,1528902152.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:32.681Z,1528902152.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:32.698Z,1528902152.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:33.082Z,1528902153.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:33.100Z,1528902153.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:33.476Z,1528902153.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:33.508Z,1528902153.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:33.890Z,1528902153.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:33.907Z,1528902153.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:34.291Z,1528902154.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:34.308Z,1528902154.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:34.690Z,1528902154.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:34.716Z,1528902154.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:35.081Z,1528902155.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:35.098Z,1528902155.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:35.481Z,1528902155.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:35.500Z,1528902155.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:35.874Z,1528902155.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:35.906Z,1528902155.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:36.279Z,1528902156.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:36.304Z,1528902156.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:36.682Z,1528902156.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:36.699Z,1528902156.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:37.089Z,1528902157.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:37.112Z,1528902157.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:37.489Z,1528902157.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:37.507Z,1528902157.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:37.891Z,1528902157.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:37.908Z,1528902157.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:38.283Z,1528902158.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:38.300Z,1528902158.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:38.681Z,1528902158.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:38.699Z,1528902158.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:39.083Z,1528902159.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:39.101Z,1528902159.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:39.481Z,1528902159.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:39.499Z,1528902159.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:39.891Z,1528902159.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:39.909Z,1528902159.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:40.291Z,1528902160.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:40.316Z,1528902160.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:40.690Z,1528902160.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:40.716Z,1528902160.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:41.082Z,1528902161.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:41.100Z,1528902161.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:41.483Z,1528902161.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:41.500Z,1528902161.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:41.874Z,1528902161.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:41.907Z,1528902161.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:42.279Z,1528902162.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:42.304Z,1528902162.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:42.674Z,1528902162.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:42.700Z,1528902162.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:43.091Z,1528902163.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:43.109Z,1528902163.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:43.490Z,1528902163.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:43.512Z,1528902163.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:43.891Z,1528902163.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:43.908Z,1528902163.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:44.281Z,1528902164.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:44.299Z,1528902164.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:44.679Z,1528902164.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:44.702Z,1528902164.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:45.082Z,1528902165.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:45.101Z,1528902165.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:45.481Z,1528902165.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:45.499Z,1528902165.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:45.890Z,1528902165.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:45.909Z,1528902165.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:46.291Z,1528902166.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:46.308Z,1528902166.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:46.701Z,1528902166.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:46.787Z,1528902166.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:47.116Z,1528902167.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:47.259Z,1528902167.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:47.472Z,1528902167.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:47.550Z,1528902167.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:47.880Z,1528902167.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:47.945Z,1528902167.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:48.277Z,1528902168.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:48.320Z,1528902168.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:48.684Z,1528902168.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:48.751Z,1528902168.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:49.094Z,1528902169.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:49.116Z,1528902169.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:49.496Z,1528902169.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:49.514Z,1528902169.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:49.894Z,1528902169.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:49.919Z,1528902169.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:50.275Z,1528902170.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:50.302Z,1528902170.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:50.675Z,1528902170.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:50.702Z,1528902170.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:51.076Z,1528902171.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:51.104Z,1528902171.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:51.475Z,1528902171.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:51.502Z,1528902171.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:51.891Z,1528902171.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:51.910Z,1528902171.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:52.296Z,1528902172.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:52.320Z,1528902172.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:52.696Z,1528902172.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:52.720Z,1528902172.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:53.075Z,1528902173.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:53.102Z,1528902173.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:53.475Z,1528902173.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:53.504Z,1528902173.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:53.875Z,1528902173.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:53.920Z,1528902173.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:54.279Z,1528902174.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:54.297Z,1528902174.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:54.681Z,1528902174.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:54.710Z,1528902174.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:55.086Z,1528902175.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:55.104Z,1528902175.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:55.489Z,1528902175.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:55.507Z,1528902175.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:55.889Z,1528902175.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:55.907Z,1528902175.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:56.282Z,1528902176.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:56.299Z,1528902176.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:56.681Z,1528902176.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:56.700Z,1528902176.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:57.083Z,1528902177.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:57.101Z,1528902177.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:57.477Z,1528902177.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:57.496Z,1528902177.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:57.886Z,1528902177.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:57.912Z,1528902177.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:58.289Z,1528902178.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:58.308Z,1528902178.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:58.686Z,1528902178.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:58.708Z,1528902178.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:59.079Z,1528902179.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:59.115Z,1528902179.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:59.483Z,1528902179.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:59.501Z,1528902179.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:02:59.881Z,1528902179.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:02:59.899Z,1528902179.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:00.279Z,1528902180.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:00.310Z,1528902180.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:00.679Z,1528902180.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:00.712Z,1528902180.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:01.086Z,1528902181.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:01.104Z,1528902181.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:01.490Z,1528902181.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:01.512Z,1528902181.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:01.889Z,1528902181.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:01.907Z,1528902181.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:02.281Z,1528902182.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:02.304Z,1528902182.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:02.679Z,1528902182.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:02.701Z,1528902182.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:03.082Z,1528902183.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:03.100Z,1528902183.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:03.474Z,1528902183.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:03.509Z,1528902183.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:03.890Z,1528902183.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:03.908Z,1528902183.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:04.293Z,1528902184.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:04.311Z,1528902184.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:04.687Z,1528902184.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:04.712Z,1528902184.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:05.085Z,1528902185.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:05.103Z,1528902185.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:05.486Z,1528902185.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:05.504Z,1528902185.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:08.592Z,1528902188.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:08.611Z,1528902188.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:08.739Z,1528902188.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:08.780Z,1528902188.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:09.145Z,1528902189.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:09.163Z,1528902189.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:09.546Z,1528902189.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:09.564Z,1528902189.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:09.945Z,1528902189.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:09.963Z,1528902189.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:10.338Z,1528902190.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:10.356Z,1528902190.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:10.737Z,1528902190.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:10.755Z,1528902190.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:11.130Z,1528902191.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:11.166Z,1528902191.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:11.535Z,1528902191.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:11.577Z,1528902191.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:11.946Z,1528902191.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:11.964Z,1528902191.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:12.345Z,1528902192.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:12.363Z,1528902192.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:12.745Z,1528902192.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:12.764Z,1528902192.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:13.138Z,1528902193.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:13.156Z,1528902193.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:13.535Z,1528902193.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:13.557Z,1528902193.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:13.935Z,1528902193.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:13.968Z,1528902193.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:14.338Z,1528902194.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:14.356Z,1528902194.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:14.737Z,1528902194.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:14.755Z,1528902194.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:15.145Z,1528902195.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:15.164Z,1528902195.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:15.545Z,1528902195.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:15.563Z,1528902195.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:15.945Z,1528902195.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:15.963Z,1528902195.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:16.335Z,1528902196.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:16.377Z,1528902196.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:16.731Z,1528902196.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:16.754Z,1528902196.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:17.136Z,1528902197.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:17.167Z,1528902197.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:17.535Z,1528902197.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:17.560Z,1528902197.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:17.946Z,1528902197.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:17.971Z,1528902197.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:18.346Z,1528902198.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:18.368Z,1528902198.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:18.747Z,1528902198.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:18.765Z,1528902198.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:19.131Z,1528902199.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:19.155Z,1528902199.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:19.530Z,1528902199.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:19.562Z,1528902199.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:19.935Z,1528902199.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:19.960Z,1528902199.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:20.334Z,1528902200.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:20.351Z,1528902200.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:20.735Z,1528902200.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:20.758Z,1528902200.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:21.147Z,1528902201.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:21.172Z,1528902201.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:21.546Z,1528902201.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:21.563Z,1528902201.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:21.946Z,1528902201.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:21.964Z,1528902201.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:22.330Z,1528902202.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:22.368Z,1528902202.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:22.727Z,1528902202.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:22.765Z,1528902202.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:23.132Z,1528902203.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:23.159Z,1528902203.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:23.527Z,1528902203.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:23.564Z,1528902203.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:23.946Z,1528902203.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:23.964Z,1528902203.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:24.351Z,1528902204.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:24.369Z,1528902204.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:24.752Z,1528902204.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:24.770Z,1528902204.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:25.131Z,1528902205.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:25.159Z,1528902205.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:25.531Z,1528902205.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:25.558Z,1528902205.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:25.931Z,1528902205.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:25.962Z,1528902205.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:26.328Z,1528902206.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:26.364Z,1528902206.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:26.732Z,1528902206.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:26.759Z,1528902206.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:27.153Z,1528902207.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:27.171Z,1528902207.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:27.552Z,1528902207.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:27.576Z,1528902207.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:27.951Z,1528902207.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:27.970Z,1528902207.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:28.332Z,1528902208.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:28.372Z,1528902208.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:28.728Z,1528902208.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:28.769Z,1528902208.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:29.132Z,1528902209.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:29.167Z,1528902209.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:29.531Z,1528902209.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:29.570Z,1528902209.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:29.952Z,1528902209.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:29.970Z,1528902209.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:30.350Z,1528902210.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:30.368Z,1528902210.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:30.754Z,1528902210.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:30.772Z,1528902210.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:31.127Z,1528902211.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:31.153Z,1528902211.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:31.531Z,1528902211.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:31.565Z,1528902211.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:31.931Z,1528902211.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:31.962Z,1528902211.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:32.332Z,1528902212.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:32.350Z,1528902212.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:32.735Z,1528902212.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:32.753Z,1528902212.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:33.145Z,1528902213.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:33.180Z,1528902213.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:33.549Z,1528902213.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:33.583Z,1528902213.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:33.941Z,1528902213.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:33.959Z,1528902213.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:34.338Z,1528902214.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:34.356Z,1528902214.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:34.736Z,1528902214.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:34.755Z,1528902214.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:35.136Z,1528902215.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:35.156Z,1528902215.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:35.538Z,1528902215.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:35.556Z,1528902215.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:35.939Z,1528902215.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:35.957Z,1528902215.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:36.345Z,1528902216.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:36.363Z,1528902216.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:36.746Z,1528902216.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:36.764Z,1528902216.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:37.138Z,1528902217.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:37.156Z,1528902217.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:37.535Z,1528902217.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:37.566Z,1528902217.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:37.938Z,1528902217.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:37.956Z,1528902217.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:38.338Z,1528902218.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:38.360Z,1528902218.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:38.735Z,1528902218.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:38.757Z,1528902218.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:39.145Z,1528902219.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:39.164Z,1528902219.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:39.549Z,1528902219.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:39.567Z,1528902219.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:39.946Z,1528902219.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:39.963Z,1528902219.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:40.340Z,1528902220.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:40.358Z,1528902220.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:40.731Z,1528902220.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:40.756Z,1528902220.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:41.139Z,1528902221.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:41.157Z,1528902221.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:41.536Z,1528902221.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:41.565Z,1528902221.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:41.943Z,1528902221.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:41.961Z,1528902221.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:42.347Z,1528902222.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:42.365Z,1528902222.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:42.746Z,1528902222.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:42.764Z,1528902222.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:43.137Z,1528902223.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:43.156Z,1528902223.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:43.535Z,1528902223.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:43.558Z,1528902223.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:43.935Z,1528902223.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:43.968Z,1528902223.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:44.331Z,1528902224.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:44.354Z,1528902224.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:44.735Z,1528902224.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:44.757Z,1528902224.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:45.145Z,1528902225.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:45.164Z,1528902225.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:45.542Z,1528902225.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:45.564Z,1528902225.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:45.942Z,1528902225.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:45.960Z,1528902225.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:46.338Z,1528902226.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:46.356Z,1528902226.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:46.731Z,1528902226.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:46.754Z,1528902226.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:47.138Z,1528902227.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:47.156Z,1528902227.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:47.535Z,1528902227.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:47.567Z,1528902227.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:47.942Z,1528902227.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:47.960Z,1528902227.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:48.346Z,1528902228.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:48.368Z,1528902228.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:48.746Z,1528902228.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:48.772Z,1528902228.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:49.131Z,1528902229.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:49.155Z,1528902229.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:49.535Z,1528902229.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:49.558Z,1528902229.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:49.939Z,1528902229.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:49.957Z,1528902229.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:50.331Z,1528902230.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:50.368Z,1528902230.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:50.735Z,1528902230.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:50.758Z,1528902230.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:51.147Z,1528902231.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:51.172Z,1528902231.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:51.546Z,1528902231.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:51.564Z,1528902231.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:51.947Z,1528902231.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:51.965Z,1528902231.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:52.338Z,1528902232.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:52.356Z,1528902232.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:52.731Z,1528902232.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:52.755Z,1528902232.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:53.135Z,1528902233.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:53.157Z,1528902233.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:53.535Z,1528902233.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:53.560Z,1528902233.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:53.943Z,1528902233.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:53.962Z,1528902233.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:54.346Z,1528902234.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:54.368Z,1528902234.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:54.749Z,1528902234.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:54.767Z,1528902234.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:55.131Z,1528902235.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:55.154Z,1528902235.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:55.537Z,1528902235.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:55.555Z,1528902235.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:55.938Z,1528902235.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:55.956Z,1528902235.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:56.331Z,1528902236.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:56.355Z,1528902236.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:56.735Z,1528902236.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:56.767Z,1528902236.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:57.147Z,1528902237.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:57.165Z,1528902237.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:57.547Z,1528902237.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:57.565Z,1528902237.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:57.946Z,1528902237.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:57.964Z,1528902237.964 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:57.964Z,1528902237.964 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 232
2018-06-13T15:03:57.964Z,1528902237.964 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:03:57.966Z,1528902237.966 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:57.966Z,1528902237.966 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 232
2018-06-13T15:03:57.966Z,1528902237.966 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:03:57.968Z,1528902237.968 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:57.968Z,1528902237.968 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 232
2018-06-13T15:03:57.968Z,1528902237.968 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:03:58.045Z,1528902238.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:03:58.045Z,1528902238.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:03:58.046Z,1528902238.046 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:03:58.331Z,1528902238.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:58.449Z,1528902238.449 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:03:58.449Z,1528902238.449 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 232
2018-06-13T15:03:58.450Z,1528902238.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:03:58.450Z,1528902238.450 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 232
2018-06-13T15:03:58.450Z,1528902238.450 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:03:58.450Z,1528902238.450 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 232
2018-06-13T15:03:58.727Z,1528902238.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:58.756Z,1528902238.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:03:58.756Z,1528902238.756 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:03:58.761Z,1528902238.761 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:03:58.761Z,1528902238.761 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:03:58.762Z,1528902238.762 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:03:58.762Z,1528902238.762 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:03:58.762Z,1528902238.762 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:03:58.763Z,1528902238.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:03:58.763Z,1528902238.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:03:59.131Z,1528902239.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:59.148Z,1528902239.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:03:59.173Z,1528902239.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:59.531Z,1528902239.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:59.565Z,1528902239.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:03:59.566Z,1528902239.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:03:59.942Z,1528902239.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:03:59.974Z,1528902239.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:03:59.975Z,1528902239.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:00.345Z,1528902240.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:00.372Z,1528902240.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:04:00.373Z,1528902240.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:00.746Z,1528902240.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:00.775Z,1528902240.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:04:00.776Z,1528902240.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:01.131Z,1528902241.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:01.148Z,1528902241.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:04:01.149Z,1528902241.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:01.535Z,1528902241.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:01.552Z,1528902241.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:04:01.553Z,1528902241.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:01.934Z,1528902241.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:01.952Z,1528902241.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:04:01.953Z,1528902241.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:02.331Z,1528902242.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:02.349Z,1528902242.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:04:02.350Z,1528902242.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:02.734Z,1528902242.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:02.752Z,1528902242.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:04:02.753Z,1528902242.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:03.145Z,1528902243.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:03.179Z,1528902243.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:04:03.180Z,1528902243.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:03.546Z,1528902243.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:03.585Z,1528902243.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:04:03.586Z,1528902243.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:03.945Z,1528902243.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:03.963Z,1528902243.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:04:03.964Z,1528902243.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:04.338Z,1528902244.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:04.356Z,1528902244.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:04:04.356Z,1528902244.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:04.731Z,1528902244.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:04.761Z,1528902244.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:04:04.762Z,1528902244.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:05.141Z,1528902245.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:05.159Z,1528902245.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:04:05.160Z,1528902245.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:05.541Z,1528902245.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:05.564Z,1528902245.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:04:05.565Z,1528902245.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:08.665Z,1528902248.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:08.683Z,1528902248.683 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T15:04:08.683Z,1528902248.683 [BPC1] Communications Fault, FailCount= 2
2018-06-13T15:04:08.683Z,1528902248.683 [BPC1](ERROR): Communications Fault
2018-06-13T15:04:08.692Z,1528902248.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T15:04:08.693Z,1528902248.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:08.777Z,1528902248.777 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T15:04:08.818Z,1528902248.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:08.856Z,1528902248.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T15:04:08.857Z,1528902248.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:09.232Z,1528902249.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:09.250Z,1528902249.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T15:04:09.251Z,1528902249.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:09.612Z,1528902249.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:09.646Z,1528902249.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T15:04:09.647Z,1528902249.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:09.734Z,1528902249.734 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T15:04:09.734Z,1528902249.734 [BPC1] No Fault, FailCount= 2
2018-06-13T15:04:10.007Z,1528902250.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:10.091Z,1528902250.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T15:04:10.092Z,1528902250.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:10.408Z,1528902250.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:10.452Z,1528902250.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T15:04:10.457Z,1528902250.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:10.811Z,1528902250.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:10.828Z,1528902250.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T15:04:10.829Z,1528902250.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:11.221Z,1528902251.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:11.257Z,1528902251.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T15:04:11.258Z,1528902251.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:11.626Z,1528902251.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:11.659Z,1528902251.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T15:04:11.660Z,1528902251.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:12.021Z,1528902252.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:12.057Z,1528902252.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T15:04:12.058Z,1528902252.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:12.410Z,1528902252.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:12.432Z,1528902252.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T15:04:12.433Z,1528902252.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:12.814Z,1528902252.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:12.832Z,1528902252.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T15:04:12.833Z,1528902252.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:13.208Z,1528902253.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:13.234Z,1528902253.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T15:04:13.235Z,1528902253.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:13.610Z,1528902253.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:13.633Z,1528902253.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T15:04:13.634Z,1528902253.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:14.022Z,1528902254.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:14.060Z,1528902254.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T15:04:14.065Z,1528902254.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:14.422Z,1528902254.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:14.439Z,1528902254.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T15:04:14.440Z,1528902254.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:14.818Z,1528902254.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:14.836Z,1528902254.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T15:04:14.836Z,1528902254.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:15.217Z,1528902255.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:15.235Z,1528902255.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T15:04:15.236Z,1528902255.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:15.612Z,1528902255.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:15.631Z,1528902255.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T15:04:15.631Z,1528902255.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:16.012Z,1528902256.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:16.030Z,1528902256.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T15:04:16.030Z,1528902256.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:16.415Z,1528902256.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:16.434Z,1528902256.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T15:04:16.434Z,1528902256.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:16.807Z,1528902256.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:16.830Z,1528902256.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T15:04:16.831Z,1528902256.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:17.218Z,1528902257.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:17.236Z,1528902257.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T15:04:17.237Z,1528902257.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:17.621Z,1528902257.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:17.640Z,1528902257.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T15:04:17.641Z,1528902257.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:18.018Z,1528902258.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:18.041Z,1528902258.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:18.412Z,1528902258.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:18.431Z,1528902258.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:18.814Z,1528902258.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:18.832Z,1528902258.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:19.214Z,1528902259.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:19.232Z,1528902259.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:19.612Z,1528902259.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:19.630Z,1528902259.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:20.021Z,1528902260.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:20.044Z,1528902260.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:20.418Z,1528902260.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:20.440Z,1528902260.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:20.818Z,1528902260.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:20.840Z,1528902260.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:21.215Z,1528902261.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:21.241Z,1528902261.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:21.607Z,1528902261.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:21.630Z,1528902261.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:22.011Z,1528902262.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:22.042Z,1528902262.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:22.414Z,1528902262.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:22.432Z,1528902262.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:22.813Z,1528902262.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:22.831Z,1528902262.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:23.219Z,1528902263.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:23.244Z,1528902263.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:23.621Z,1528902263.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:23.644Z,1528902263.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:24.019Z,1528902264.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:24.036Z,1528902264.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:24.411Z,1528902264.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:24.445Z,1528902264.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:24.814Z,1528902264.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:24.832Z,1528902264.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:25.207Z,1528902265.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:25.231Z,1528902265.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:25.618Z,1528902265.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:25.640Z,1528902265.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:26.023Z,1528902266.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:26.048Z,1528902266.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:26.426Z,1528902266.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:26.443Z,1528902266.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:26.822Z,1528902266.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:26.844Z,1528902266.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:27.204Z,1528902267.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:27.242Z,1528902267.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:27.603Z,1528902267.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:27.645Z,1528902267.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:28.007Z,1528902268.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:28.040Z,1528902268.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:28.403Z,1528902268.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:28.444Z,1528902268.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:28.803Z,1528902268.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:28.840Z,1528902268.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:29.224Z,1528902269.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:29.242Z,1528902269.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:29.628Z,1528902269.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:29.646Z,1528902269.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:30.019Z,1528902270.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:30.039Z,1528902270.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:30.407Z,1528902270.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:30.441Z,1528902270.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:30.803Z,1528902270.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:30.841Z,1528902270.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:31.204Z,1528902271.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:31.239Z,1528902271.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:31.607Z,1528902271.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:31.634Z,1528902271.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:32.028Z,1528902272.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:32.046Z,1528902272.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:32.423Z,1528902272.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:32.441Z,1528902272.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:32.822Z,1528902272.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:32.858Z,1528902272.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:33.204Z,1528902273.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:33.242Z,1528902273.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:33.603Z,1528902273.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:33.639Z,1528902273.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:34.007Z,1528902274.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:34.040Z,1528902274.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:34.403Z,1528902274.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:34.444Z,1528902274.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:34.803Z,1528902274.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:34.840Z,1528902274.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:35.223Z,1528902275.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:35.241Z,1528902275.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:35.628Z,1528902275.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:35.652Z,1528902275.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:36.023Z,1528902276.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:36.041Z,1528902276.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:36.407Z,1528902276.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:36.440Z,1528902276.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:36.803Z,1528902276.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:36.837Z,1528902276.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:37.204Z,1528902277.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:37.235Z,1528902277.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:37.608Z,1528902277.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:37.635Z,1528902277.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:38.024Z,1528902278.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:38.042Z,1528902278.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:38.422Z,1528902278.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:38.444Z,1528902278.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:38.823Z,1528902278.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:38.841Z,1528902278.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:39.204Z,1528902279.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:39.242Z,1528902279.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:39.603Z,1528902279.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:39.639Z,1528902279.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:40.007Z,1528902280.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:40.047Z,1528902280.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:40.408Z,1528902280.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:40.440Z,1528902280.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:40.803Z,1528902280.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:40.836Z,1528902280.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:41.217Z,1528902281.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:41.245Z,1528902281.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:41.629Z,1528902281.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:41.652Z,1528902281.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:42.014Z,1528902282.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:42.049Z,1528902282.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:42.408Z,1528902282.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:42.445Z,1528902282.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:42.803Z,1528902282.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:42.820Z,1528902282.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:43.208Z,1528902283.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:43.238Z,1528902283.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:43.607Z,1528902283.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:43.624Z,1528902283.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:44.021Z,1528902284.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:44.050Z,1528902284.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:44.422Z,1528902284.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:44.456Z,1528902284.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:44.817Z,1528902284.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:44.851Z,1528902284.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:45.204Z,1528902285.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:45.226Z,1528902285.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:45.607Z,1528902285.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:45.625Z,1528902285.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:46.011Z,1528902286.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:46.028Z,1528902286.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:46.411Z,1528902286.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:46.430Z,1528902286.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:46.810Z,1528902286.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:46.828Z,1528902286.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:47.221Z,1528902287.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:47.256Z,1528902287.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:47.621Z,1528902287.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:47.661Z,1528902287.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:48.021Z,1528902288.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:48.057Z,1528902288.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:48.409Z,1528902288.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:48.432Z,1528902288.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:48.810Z,1528902288.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:48.827Z,1528902288.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:49.211Z,1528902289.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:49.229Z,1528902289.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:49.609Z,1528902289.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:49.627Z,1528902289.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:50.017Z,1528902290.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:50.035Z,1528902290.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:50.421Z,1528902290.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:50.458Z,1528902290.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:50.821Z,1528902290.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:50.857Z,1528902290.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:51.211Z,1528902291.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:51.229Z,1528902291.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:51.609Z,1528902291.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:51.627Z,1528902291.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:52.011Z,1528902292.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:52.032Z,1528902292.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:52.411Z,1528902292.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:52.429Z,1528902292.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:52.810Z,1528902292.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:52.832Z,1528902292.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:53.221Z,1528902293.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:53.257Z,1528902293.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:53.622Z,1528902293.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:53.644Z,1528902293.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:54.022Z,1528902294.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:54.044Z,1528902294.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:54.411Z,1528902294.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:54.432Z,1528902294.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:54.814Z,1528902294.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:54.832Z,1528902294.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:55.212Z,1528902295.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:55.231Z,1528902295.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:55.610Z,1528902295.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:55.633Z,1528902295.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:56.018Z,1528902296.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:56.036Z,1528902296.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:56.425Z,1528902296.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:56.444Z,1528902296.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:56.818Z,1528902296.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:56.836Z,1528902296.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:57.214Z,1528902297.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:57.231Z,1528902297.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:57.613Z,1528902297.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:57.631Z,1528902297.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:58.011Z,1528902298.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:58.034Z,1528902298.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:58.415Z,1528902298.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:58.432Z,1528902298.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:58.814Z,1528902298.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:58.832Z,1528902298.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:59.218Z,1528902299.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:59.240Z,1528902299.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:04:59.621Z,1528902299.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:04:59.644Z,1528902299.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:00.018Z,1528902300.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:00.040Z,1528902300.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:00.411Z,1528902300.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:00.433Z,1528902300.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:00.814Z,1528902300.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:00.832Z,1528902300.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:01.214Z,1528902301.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:01.232Z,1528902301.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:01.611Z,1528902301.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:01.645Z,1528902301.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:02.024Z,1528902302.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:02.048Z,1528902302.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:02.422Z,1528902302.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:02.448Z,1528902302.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:02.824Z,1528902302.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:02.848Z,1528902302.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:03.211Z,1528902303.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:03.237Z,1528902303.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:03.610Z,1528902303.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:03.632Z,1528902303.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:04.022Z,1528902304.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:04.044Z,1528902304.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:04.424Z,1528902304.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:04.448Z,1528902304.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:04.823Z,1528902304.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:04.845Z,1528902304.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:05.218Z,1528902305.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:05.236Z,1528902305.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:05.620Z,1528902305.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:05.638Z,1528902305.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:08.738Z,1528902308.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:08.777Z,1528902308.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:08.914Z,1528902308.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:08.948Z,1528902308.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:09.312Z,1528902309.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:09.330Z,1528902309.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:09.691Z,1528902309.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:09.748Z,1528902309.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:10.087Z,1528902310.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:10.121Z,1528902310.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:10.488Z,1528902310.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:10.548Z,1528902310.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:10.887Z,1528902310.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:10.927Z,1528902310.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:11.297Z,1528902311.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:11.325Z,1528902311.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:11.697Z,1528902311.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:11.727Z,1528902311.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:12.094Z,1528902312.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:12.132Z,1528902312.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:12.487Z,1528902312.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:12.513Z,1528902312.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:12.888Z,1528902312.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:12.906Z,1528902312.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:13.291Z,1528902313.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:13.309Z,1528902313.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:13.691Z,1528902313.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:13.709Z,1528902313.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:14.102Z,1528902314.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:14.135Z,1528902314.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:14.506Z,1528902314.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:14.532Z,1528902314.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:14.902Z,1528902314.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:14.935Z,1528902314.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:15.290Z,1528902315.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:15.309Z,1528902315.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:15.691Z,1528902315.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:15.710Z,1528902315.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:16.090Z,1528902316.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:16.108Z,1528902316.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:16.491Z,1528902316.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:16.575Z,1528902316.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:16.886Z,1528902316.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:16.947Z,1528902316.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:17.301Z,1528902317.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:17.343Z,1528902317.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:17.702Z,1528902317.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:17.736Z,1528902317.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:18.101Z,1528902318.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:18.119Z,1528902318.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:18.492Z,1528902318.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:18.510Z,1528902318.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:18.893Z,1528902318.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:18.911Z,1528902318.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:19.293Z,1528902319.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:19.311Z,1528902319.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:19.691Z,1528902319.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:19.709Z,1528902319.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:20.101Z,1528902320.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:20.119Z,1528902320.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:20.501Z,1528902320.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:20.519Z,1528902320.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:20.897Z,1528902320.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:20.915Z,1528902320.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:21.294Z,1528902321.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:21.312Z,1528902321.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:21.691Z,1528902321.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:21.716Z,1528902321.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:22.092Z,1528902322.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:22.110Z,1528902322.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:22.492Z,1528902322.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:22.519Z,1528902322.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:22.893Z,1528902322.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:22.911Z,1528902322.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:23.301Z,1528902323.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:23.319Z,1528902323.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:23.701Z,1528902323.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:23.719Z,1528902323.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:24.098Z,1528902324.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:24.120Z,1528902324.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:24.491Z,1528902324.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:24.526Z,1528902324.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:24.894Z,1528902324.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:24.917Z,1528902324.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:25.295Z,1528902325.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:25.320Z,1528902325.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:25.693Z,1528902325.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:25.711Z,1528902325.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:26.107Z,1528902326.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:26.126Z,1528902326.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:26.506Z,1528902326.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:26.524Z,1528902326.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:26.903Z,1528902326.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:26.921Z,1528902326.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:27.291Z,1528902327.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:27.318Z,1528902327.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:27.693Z,1528902327.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:27.711Z,1528902327.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:28.091Z,1528902328.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:28.120Z,1528902328.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:28.488Z,1528902328.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:28.540Z,1528902328.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:28.887Z,1528902328.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:28.923Z,1528902328.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:29.303Z,1528902329.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:29.329Z,1528902329.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:29.704Z,1528902329.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:29.740Z,1528902329.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:30.104Z,1528902330.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:30.128Z,1528902330.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:30.487Z,1528902330.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:30.520Z,1528902330.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:30.887Z,1528902330.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:30.922Z,1528902330.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:31.288Z,1528902331.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:31.327Z,1528902331.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:31.687Z,1528902331.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:31.704Z,1528902331.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:32.101Z,1528902332.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:32.131Z,1528902332.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:32.501Z,1528902332.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:32.528Z,1528902332.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:32.897Z,1528902332.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:32.931Z,1528902332.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:33.291Z,1528902333.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:33.326Z,1528902333.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:33.686Z,1528902333.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:33.704Z,1528902333.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:34.087Z,1528902334.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:34.122Z,1528902334.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:34.490Z,1528902334.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:34.508Z,1528902334.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:34.890Z,1528902334.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:34.908Z,1528902334.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:35.302Z,1528902335.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:35.336Z,1528902335.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:35.700Z,1528902335.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:35.718Z,1528902335.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:36.094Z,1528902336.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:36.112Z,1528902336.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:36.492Z,1528902336.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:36.510Z,1528902336.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:36.894Z,1528902336.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:36.912Z,1528902336.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:37.293Z,1528902337.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:37.311Z,1528902337.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:37.693Z,1528902337.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:37.711Z,1528902337.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:38.101Z,1528902338.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:38.120Z,1528902338.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:38.501Z,1528902338.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:38.519Z,1528902338.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:38.898Z,1528902338.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:38.916Z,1528902338.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:39.294Z,1528902339.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:39.312Z,1528902339.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:39.687Z,1528902339.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:39.732Z,1528902339.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:40.094Z,1528902340.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:40.148Z,1528902340.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:40.491Z,1528902340.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:40.517Z,1528902340.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:40.887Z,1528902340.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:40.921Z,1528902340.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:41.303Z,1528902341.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:41.321Z,1528902341.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:41.708Z,1528902341.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:41.726Z,1528902341.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:42.103Z,1528902342.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:42.121Z,1528902342.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:42.491Z,1528902342.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:42.521Z,1528902342.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:42.887Z,1528902342.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:42.935Z,1528902342.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:43.298Z,1528902343.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:43.316Z,1528902343.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:43.687Z,1528902343.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:43.724Z,1528902343.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:44.107Z,1528902344.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:44.126Z,1528902344.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:44.502Z,1528902344.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:44.524Z,1528902344.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:44.903Z,1528902344.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:44.921Z,1528902344.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:45.287Z,1528902345.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:45.317Z,1528902345.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:45.687Z,1528902345.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:45.720Z,1528902345.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:46.087Z,1528902346.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:46.123Z,1528902346.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:46.488Z,1528902346.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:46.521Z,1528902346.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:46.887Z,1528902346.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:46.920Z,1528902346.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:47.303Z,1528902347.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:47.321Z,1528902347.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:47.708Z,1528902347.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:47.726Z,1528902347.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:48.104Z,1528902348.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:48.121Z,1528902348.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:48.487Z,1528902348.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:48.517Z,1528902348.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:48.887Z,1528902348.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:48.922Z,1528902348.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:49.288Z,1528902349.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:49.321Z,1528902349.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:49.687Z,1528902349.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:49.720Z,1528902349.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:50.109Z,1528902350.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:50.127Z,1528902350.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:50.514Z,1528902350.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:50.532Z,1528902350.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:50.908Z,1528902350.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:50.926Z,1528902350.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:51.284Z,1528902351.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:51.335Z,1528902351.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:51.687Z,1528902351.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:51.735Z,1528902351.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:52.087Z,1528902352.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:52.121Z,1528902352.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:52.488Z,1528902352.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:52.506Z,1528902352.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:52.886Z,1528902352.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:52.905Z,1528902352.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:53.298Z,1528902353.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:53.324Z,1528902353.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:53.702Z,1528902353.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:53.740Z,1528902353.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:54.102Z,1528902354.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:54.120Z,1528902354.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:54.491Z,1528902354.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:54.509Z,1528902354.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:54.893Z,1528902354.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:54.912Z,1528902354.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:55.290Z,1528902355.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:55.316Z,1528902355.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:55.691Z,1528902355.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:55.744Z,1528902355.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:56.101Z,1528902356.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:56.119Z,1528902356.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:56.498Z,1528902356.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:56.520Z,1528902356.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:56.898Z,1528902356.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:56.920Z,1528902356.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:57.294Z,1528902357.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:57.313Z,1528902357.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:57.687Z,1528902357.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:57.718Z,1528902357.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:58.101Z,1528902358.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:58.119Z,1528902358.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:58.501Z,1528902358.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:58.519Z,1528902358.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:58.898Z,1528902358.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:58.916Z,1528902358.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:59.291Z,1528902359.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:59.317Z,1528902359.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:05:59.694Z,1528902359.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:05:59.716Z,1528902359.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:00.103Z,1528902360.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:00.121Z,1528902360.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:00.506Z,1528902360.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:00.523Z,1528902360.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:00.908Z,1528902360.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:00.926Z,1528902360.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:01.294Z,1528902361.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:01.312Z,1528902361.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:01.692Z,1528902361.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:01.710Z,1528902361.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:02.108Z,1528902362.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:02.126Z,1528902362.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:02.506Z,1528902362.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:02.524Z,1528902362.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:02.905Z,1528902362.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:02.923Z,1528902362.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:03.299Z,1528902363.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:03.317Z,1528902363.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:03.693Z,1528902363.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:03.711Z,1528902363.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:04.103Z,1528902364.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:04.121Z,1528902364.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:04.507Z,1528902364.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:04.526Z,1528902364.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:04.899Z,1528902364.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:04.931Z,1528902364.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:05.298Z,1528902365.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:05.316Z,1528902365.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:05.698Z,1528902365.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:05.716Z,1528902365.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:08.825Z,1528902368.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:08.859Z,1528902368.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:08.986Z,1528902368.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:09.037Z,1528902369.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:09.385Z,1528902369.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:09.424Z,1528902369.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:09.774Z,1528902369.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:09.792Z,1528902369.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:10.172Z,1528902370.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:10.190Z,1528902370.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:10.572Z,1528902370.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:10.607Z,1528902370.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:10.973Z,1528902370.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:10.996Z,1528902370.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:11.378Z,1528902371.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:11.401Z,1528902371.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:11.781Z,1528902371.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:11.800Z,1528902371.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:12.178Z,1528902372.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:12.196Z,1528902372.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:12.566Z,1528902372.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:12.601Z,1528902372.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:12.971Z,1528902372.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:13.013Z,1528902373.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:13.367Z,1528902373.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:13.391Z,1528902373.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:13.771Z,1528902373.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:13.794Z,1528902373.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:14.182Z,1528902374.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:14.201Z,1528902374.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:14.582Z,1528902374.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:14.600Z,1528902374.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:14.983Z,1528902374.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:15.001Z,1528902375.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:15.374Z,1528902375.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:15.392Z,1528902375.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:15.767Z,1528902375.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:15.790Z,1528902375.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:16.171Z,1528902376.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:16.194Z,1528902376.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:16.574Z,1528902376.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:16.592Z,1528902376.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:16.969Z,1528902376.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:16.987Z,1528902376.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:17.382Z,1528902377.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:17.405Z,1528902377.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:17.783Z,1528902377.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:17.802Z,1528902377.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:18.182Z,1528902378.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:18.201Z,1528902378.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:18.573Z,1528902378.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:18.591Z,1528902378.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:18.974Z,1528902378.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:18.992Z,1528902378.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:19.373Z,1528902379.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:19.391Z,1528902379.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:19.772Z,1528902379.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:19.811Z,1528902379.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:20.187Z,1528902380.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:20.206Z,1528902380.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:20.583Z,1528902380.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:20.602Z,1528902380.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:20.982Z,1528902380.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:21.008Z,1528902381.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:21.367Z,1528902381.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:21.410Z,1528902381.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:21.767Z,1528902381.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:21.801Z,1528902381.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:22.167Z,1528902382.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:22.204Z,1528902382.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:22.568Z,1528902382.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:22.602Z,1528902382.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:22.963Z,1528902382.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:22.990Z,1528902382.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:23.384Z,1528902383.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:23.411Z,1528902383.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:23.789Z,1528902383.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:23.808Z,1528902383.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:24.184Z,1528902384.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:24.205Z,1528902384.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:24.567Z,1528902384.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:24.602Z,1528902384.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:24.964Z,1528902384.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:25.005Z,1528902385.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:25.368Z,1528902385.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:25.406Z,1528902385.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:25.767Z,1528902385.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:25.784Z,1528902385.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:26.185Z,1528902386.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:26.216Z,1528902386.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:26.586Z,1528902386.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:26.615Z,1528902386.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:26.982Z,1528902386.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:27.016Z,1528902387.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:27.372Z,1528902387.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:27.390Z,1528902387.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:27.770Z,1528902387.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:27.788Z,1528902387.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:28.170Z,1528902388.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:28.188Z,1528902388.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:28.570Z,1528902388.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:28.590Z,1528902388.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:28.968Z,1528902388.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:28.986Z,1528902388.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:29.381Z,1528902389.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:29.422Z,1528902389.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:29.781Z,1528902389.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:29.820Z,1528902389.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:30.181Z,1528902390.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:30.200Z,1528902390.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:30.571Z,1528902390.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:30.596Z,1528902390.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:30.972Z,1528902390.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:31.002Z,1528902391.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:31.375Z,1528902391.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:31.393Z,1528902391.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:31.771Z,1528902391.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:31.793Z,1528902391.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:32.181Z,1528902392.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:32.200Z,1528902392.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:32.581Z,1528902392.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:32.600Z,1528902392.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:32.978Z,1528902392.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:33.001Z,1528902393.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:33.374Z,1528902393.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:33.393Z,1528902393.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:33.767Z,1528902393.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:33.797Z,1528902393.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:34.166Z,1528902394.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:34.198Z,1528902394.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:34.574Z,1528902394.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:34.606Z,1528902394.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:34.967Z,1528902394.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:34.990Z,1528902394.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:35.383Z,1528902395.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:35.403Z,1528902395.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:35.783Z,1528902395.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:35.805Z,1528902395.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:36.180Z,1528902396.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:36.198Z,1528902396.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:36.571Z,1528902396.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:36.595Z,1528902396.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:36.978Z,1528902396.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:36.996Z,1528902396.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:37.368Z,1528902397.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:37.394Z,1528902397.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:37.771Z,1528902397.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:37.795Z,1528902397.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:38.184Z,1528902398.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:38.203Z,1528902398.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:38.583Z,1528902398.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:38.602Z,1528902398.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:38.983Z,1528902398.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:39.021Z,1528902399.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:39.371Z,1528902399.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:39.398Z,1528902399.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:39.763Z,1528902399.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:39.800Z,1528902399.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:40.171Z,1528902400.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:40.196Z,1528902400.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:40.563Z,1528902400.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:40.593Z,1528902400.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:40.977Z,1528902400.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:41.000Z,1528902401.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:41.383Z,1528902401.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:41.402Z,1528902401.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:41.786Z,1528902401.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:41.806Z,1528902401.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:42.182Z,1528902402.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:42.202Z,1528902402.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:42.571Z,1528902402.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:42.594Z,1528902402.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:42.975Z,1528902402.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:42.992Z,1528902402.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:43.374Z,1528902403.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:43.391Z,1528902403.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:43.770Z,1528902403.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:43.794Z,1528902403.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:44.186Z,1528902404.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:44.212Z,1528902404.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:44.586Z,1528902404.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:44.605Z,1528902404.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:44.983Z,1528902404.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:45.002Z,1528902405.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:45.371Z,1528902405.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:45.410Z,1528902405.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:45.773Z,1528902405.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:45.791Z,1528902405.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:46.183Z,1528902406.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:46.202Z,1528902406.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:46.586Z,1528902406.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:46.605Z,1528902406.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:46.983Z,1528902406.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:47.009Z,1528902407.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:47.366Z,1528902407.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:47.412Z,1528902407.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:47.764Z,1528902407.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:47.792Z,1528902407.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:48.183Z,1528902408.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:48.202Z,1528902408.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:48.587Z,1528902408.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:48.605Z,1528902408.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:48.988Z,1528902408.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:49.006Z,1528902409.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:49.364Z,1528902409.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:49.391Z,1528902409.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:49.767Z,1528902409.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:49.804Z,1528902409.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:50.184Z,1528902410.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:50.202Z,1528902410.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:50.582Z,1528902410.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:50.601Z,1528902410.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:50.983Z,1528902410.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:51.002Z,1528902411.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:51.363Z,1528902411.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:51.406Z,1528902411.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:51.763Z,1528902411.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:51.801Z,1528902411.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:52.177Z,1528902412.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:52.205Z,1528902412.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:52.589Z,1528902412.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:52.607Z,1528902412.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:52.973Z,1528902412.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:53.001Z,1528902413.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:53.366Z,1528902413.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:53.392Z,1528902413.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:53.763Z,1528902413.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:53.812Z,1528902413.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:54.173Z,1528902414.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:54.209Z,1528902414.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:54.582Z,1528902414.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:54.620Z,1528902414.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:54.981Z,1528902414.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:55.016Z,1528902415.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:55.364Z,1528902415.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:55.382Z,1528902415.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:55.767Z,1528902415.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:55.808Z,1528902415.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:56.177Z,1528902416.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:56.219Z,1528902416.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:56.586Z,1528902416.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:56.614Z,1528902416.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:56.981Z,1528902416.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:57.016Z,1528902417.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:57.371Z,1528902417.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:57.389Z,1528902417.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:57.770Z,1528902417.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:57.788Z,1528902417.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:58.181Z,1528902418.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:58.218Z,1528902418.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:58.581Z,1528902418.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:58.623Z,1528902418.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:58.982Z,1528902418.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:59.015Z,1528902419.015 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:59.016Z,1528902419.016 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 233
2018-06-13T15:06:59.016Z,1528902419.016 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:06:59.018Z,1528902419.018 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:59.018Z,1528902419.018 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 233
2018-06-13T15:06:59.018Z,1528902419.018 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:06:59.019Z,1528902419.019 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:06:59.020Z,1528902419.020 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 233
2018-06-13T15:06:59.020Z,1528902419.020 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:06:59.105Z,1528902419.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:06:59.105Z,1528902419.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:06:59.106Z,1528902419.106 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:06:59.375Z,1528902419.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:59.473Z,1528902419.473 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:06:59.473Z,1528902419.473 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 233
2018-06-13T15:06:59.474Z,1528902419.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:06:59.474Z,1528902419.474 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 233
2018-06-13T15:06:59.474Z,1528902419.474 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:06:59.474Z,1528902419.474 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 233
2018-06-13T15:06:59.773Z,1528902419.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:06:59.803Z,1528902419.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:06:59.804Z,1528902419.804 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:06:59.804Z,1528902419.804 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:06:59.804Z,1528902419.804 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:06:59.805Z,1528902419.805 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:06:59.805Z,1528902419.805 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:06:59.805Z,1528902419.805 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:06:59.806Z,1528902419.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:06:59.806Z,1528902419.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:07:00.183Z,1528902420.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:00.238Z,1528902420.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:07:00.239Z,1528902420.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:00.586Z,1528902420.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:00.604Z,1528902420.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:07:00.605Z,1528902420.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:00.987Z,1528902420.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:01.005Z,1528902421.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:07:01.006Z,1528902421.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:01.374Z,1528902421.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:01.400Z,1528902421.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:07:01.401Z,1528902421.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:01.770Z,1528902421.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:01.794Z,1528902421.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:07:01.795Z,1528902421.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:02.188Z,1528902422.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:02.212Z,1528902422.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:07:02.213Z,1528902422.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:02.587Z,1528902422.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:02.605Z,1528902422.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:07:02.606Z,1528902422.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:02.985Z,1528902422.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:03.003Z,1528902423.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:07:03.004Z,1528902423.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:03.375Z,1528902423.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:03.392Z,1528902423.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:07:03.394Z,1528902423.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:03.773Z,1528902423.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:03.791Z,1528902423.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:07:03.792Z,1528902423.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:04.186Z,1528902424.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:04.210Z,1528902424.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:07:04.212Z,1528902424.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:04.587Z,1528902424.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:04.611Z,1528902424.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:07:04.612Z,1528902424.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:04.987Z,1528902424.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:05.012Z,1528902425.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:07:05.013Z,1528902425.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:05.378Z,1528902425.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:05.396Z,1528902425.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:07:05.397Z,1528902425.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:05.400Z,1528902425.400 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T15:07:05.400Z,1528902425.400 [Default:CheckIn:C.Wait] Stopped
2018-06-13T15:07:05.400Z,1528902425.400 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T15:07:05.401Z,1528902425.401 [Default:CheckIn:D] Running Loop=1
2018-06-13T15:07:05.771Z,1528902425.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:05.800Z,1528902425.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:07:05.801Z,1528902425.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:05.804Z,1528902425.804 [Default:CheckIn:D] Stopped
2018-06-13T15:07:05.804Z,1528902425.804 [Default:CheckIn:E] Running Loop=1
2018-06-13T15:07:06.190Z,1528902426.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:06.215Z,1528902426.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:07:06.216Z,1528902426.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:06.219Z,1528902426.219 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 699.872656 min 
2018-06-13T15:07:06.219Z,1528902426.219 [Default:CheckIn:E] Stopped
2018-06-13T15:07:06.219Z,1528902426.219 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T15:07:06.219Z,1528902426.219 [Default:CheckIn] Stopped
2018-06-13T15:07:06.220Z,1528902426.220 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T15:07:06.220Z,1528902426.220 [Default:CheckIn](INFO): Running loop #68
2018-06-13T15:07:06.220Z,1528902426.220 [Default:CheckIn] Running Loop=68
2018-06-13T15:07:06.220Z,1528902426.220 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T15:07:06.220Z,1528902426.220 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T15:07:06.592Z,1528902426.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:06.616Z,1528902426.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:07:06.617Z,1528902426.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:06.987Z,1528902426.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:07.016Z,1528902427.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:07:07.017Z,1528902427.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:07.372Z,1528902427.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:07.400Z,1528902427.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:07:07.401Z,1528902427.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:07.771Z,1528902427.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:07.799Z,1528902427.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:07:07.799Z,1528902427.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:08.193Z,1528902428.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:08.219Z,1528902428.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:07:08.220Z,1528902428.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:08.591Z,1528902428.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:08.610Z,1528902428.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:07:08.611Z,1528902428.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:08.988Z,1528902428.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:09.012Z,1528902429.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:07:09.013Z,1528902429.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:09.372Z,1528902429.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:09.404Z,1528902429.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:07:09.405Z,1528902429.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:12.499Z,1528902432.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:12.517Z,1528902432.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-06-13T15:07:12.518Z,1528902432.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:12.652Z,1528902432.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:12.720Z,1528902432.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T15:07:12.721Z,1528902432.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:13.052Z,1528902433.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:13.100Z,1528902433.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T15:07:13.101Z,1528902433.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:13.451Z,1528902433.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:13.468Z,1528902433.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T15:07:13.469Z,1528902433.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:13.827Z,1528902433.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:13.867Z,1528902433.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T15:07:13.868Z,1528902433.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:14.239Z,1528902434.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:14.258Z,1528902434.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T15:07:14.258Z,1528902434.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:14.628Z,1528902434.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:14.660Z,1528902434.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:07:14.662Z,1528902434.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:15.039Z,1528902435.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:15.064Z,1528902435.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:07:15.065Z,1528902435.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:15.448Z,1528902435.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:15.466Z,1528902435.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T15:07:15.467Z,1528902435.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:15.847Z,1528902435.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:15.865Z,1528902435.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T15:07:15.866Z,1528902435.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:16.247Z,1528902436.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:16.266Z,1528902436.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:07:16.267Z,1528902436.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:16.627Z,1528902436.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:16.656Z,1528902436.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:07:16.657Z,1528902436.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:17.028Z,1528902437.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:17.060Z,1528902437.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:07:17.061Z,1528902437.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:17.428Z,1528902437.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:17.463Z,1528902437.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T15:07:17.464Z,1528902437.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:17.827Z,1528902437.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:17.856Z,1528902437.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T15:07:17.856Z,1528902437.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:18.251Z,1528902438.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:18.269Z,1528902438.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T15:07:18.270Z,1528902438.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:18.648Z,1528902438.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:18.672Z,1528902438.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T15:07:18.673Z,1528902438.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:19.042Z,1528902439.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:19.067Z,1528902439.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:19.427Z,1528902439.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:19.467Z,1528902439.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:19.827Z,1528902439.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:19.864Z,1528902439.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:20.231Z,1528902440.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:20.268Z,1528902440.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:20.627Z,1528902440.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:20.664Z,1528902440.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:21.027Z,1528902441.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:21.065Z,1528902441.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:21.450Z,1528902441.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:21.468Z,1528902441.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:21.852Z,1528902441.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:21.876Z,1528902441.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:22.248Z,1528902442.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:22.267Z,1528902442.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:22.628Z,1528902442.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:22.663Z,1528902442.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:23.027Z,1528902443.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:23.066Z,1528902443.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:23.428Z,1528902443.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:23.459Z,1528902443.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:23.828Z,1528902443.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:23.846Z,1528902443.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:24.246Z,1528902444.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:24.279Z,1528902444.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:24.646Z,1528902444.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:24.673Z,1528902444.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:25.046Z,1528902445.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:25.080Z,1528902445.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:25.424Z,1528902445.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:25.472Z,1528902445.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:25.830Z,1528902445.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:25.882Z,1528902445.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:26.231Z,1528902446.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:26.250Z,1528902446.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:26.628Z,1528902446.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:26.646Z,1528902446.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:27.030Z,1528902447.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:27.048Z,1528902447.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:27.442Z,1528902447.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:27.483Z,1528902447.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:27.842Z,1528902447.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:27.880Z,1528902447.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:28.245Z,1528902448.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:28.282Z,1528902448.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:28.631Z,1528902448.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:28.649Z,1528902448.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:29.028Z,1528902449.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:29.046Z,1528902449.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:29.432Z,1528902449.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:29.458Z,1528902449.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:29.834Z,1528902449.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:29.852Z,1528902449.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:30.285Z,1528902450.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:30.304Z,1528902450.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:30.642Z,1528902450.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:30.684Z,1528902450.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:31.042Z,1528902451.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:31.060Z,1528902451.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:31.438Z,1528902451.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:31.456Z,1528902451.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:31.833Z,1528902451.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:31.851Z,1528902451.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:32.245Z,1528902452.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:32.264Z,1528902452.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:32.642Z,1528902452.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:32.659Z,1528902452.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:33.037Z,1528902453.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:33.055Z,1528902453.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:33.436Z,1528902453.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:33.455Z,1528902453.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:33.833Z,1528902453.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:33.851Z,1528902453.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:34.242Z,1528902454.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:34.260Z,1528902454.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:34.642Z,1528902454.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:34.660Z,1528902454.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:35.039Z,1528902455.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:35.057Z,1528902455.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:35.431Z,1528902455.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:35.460Z,1528902455.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:35.834Z,1528902455.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:35.852Z,1528902455.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:36.246Z,1528902456.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:36.264Z,1528902456.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:36.642Z,1528902456.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:36.659Z,1528902456.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:37.042Z,1528902457.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:37.060Z,1528902457.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:37.427Z,1528902457.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:37.466Z,1528902457.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:37.833Z,1528902457.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:37.857Z,1528902457.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:38.243Z,1528902458.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:38.292Z,1528902458.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:38.642Z,1528902458.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:38.668Z,1528902458.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:39.042Z,1528902459.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:39.060Z,1528902459.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:39.431Z,1528902459.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:39.457Z,1528902459.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:39.833Z,1528902459.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:39.851Z,1528902459.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:40.243Z,1528902460.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:40.261Z,1528902460.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:40.643Z,1528902460.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:40.661Z,1528902460.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:41.040Z,1528902461.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:41.064Z,1528902461.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:41.431Z,1528902461.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:41.455Z,1528902461.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:41.831Z,1528902461.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:41.856Z,1528902461.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:42.242Z,1528902462.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:42.261Z,1528902462.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:42.642Z,1528902462.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:42.660Z,1528902462.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:43.043Z,1528902463.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:43.060Z,1528902463.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:43.433Z,1528902463.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:43.451Z,1528902463.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:43.831Z,1528902463.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:43.860Z,1528902463.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:44.247Z,1528902464.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:44.296Z,1528902464.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:44.646Z,1528902464.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:44.664Z,1528902464.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:45.046Z,1528902465.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:45.063Z,1528902465.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:45.435Z,1528902465.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:45.453Z,1528902465.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:45.823Z,1528902465.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:45.865Z,1528902465.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:46.246Z,1528902466.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:46.264Z,1528902466.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:46.645Z,1528902466.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:46.663Z,1528902466.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:47.044Z,1528902467.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:47.062Z,1528902467.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:47.431Z,1528902467.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:47.457Z,1528902467.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:47.839Z,1528902467.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:47.857Z,1528902467.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:48.248Z,1528902468.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:48.267Z,1528902468.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:48.651Z,1528902468.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:48.669Z,1528902468.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:49.049Z,1528902469.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:49.073Z,1528902469.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:49.428Z,1528902469.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:49.457Z,1528902469.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:49.828Z,1528902469.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:49.861Z,1528902469.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:50.252Z,1528902470.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:50.270Z,1528902470.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:50.644Z,1528902470.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:50.662Z,1528902470.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:51.044Z,1528902471.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:51.062Z,1528902471.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:51.428Z,1528902471.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:51.458Z,1528902471.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:51.827Z,1528902471.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:51.864Z,1528902471.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:52.248Z,1528902472.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:52.266Z,1528902472.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:52.653Z,1528902472.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:52.671Z,1528902472.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:53.044Z,1528902473.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:53.068Z,1528902473.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:53.428Z,1528902473.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:53.460Z,1528902473.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:53.827Z,1528902473.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:53.871Z,1528902473.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:54.251Z,1528902474.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:54.269Z,1528902474.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:54.648Z,1528902474.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:54.672Z,1528902474.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:55.048Z,1528902475.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:55.066Z,1528902475.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:55.428Z,1528902475.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:55.476Z,1528902475.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:55.827Z,1528902475.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:55.872Z,1528902475.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:56.253Z,1528902476.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:56.271Z,1528902476.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:56.649Z,1528902476.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:56.667Z,1528902476.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:57.044Z,1528902477.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:57.062Z,1528902477.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:57.431Z,1528902477.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:57.460Z,1528902477.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:57.823Z,1528902477.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:57.859Z,1528902477.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:58.247Z,1528902478.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:58.265Z,1528902478.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:58.649Z,1528902478.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:58.668Z,1528902478.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:59.045Z,1528902479.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:59.063Z,1528902479.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:59.428Z,1528902479.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:59.473Z,1528902479.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:07:59.827Z,1528902479.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:07:59.868Z,1528902479.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:00.249Z,1528902480.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:00.267Z,1528902480.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:00.652Z,1528902480.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:00.670Z,1528902480.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:01.049Z,1528902481.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:01.067Z,1528902481.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:01.429Z,1528902481.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:01.466Z,1528902481.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:01.827Z,1528902481.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:01.864Z,1528902481.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:02.254Z,1528902482.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:02.272Z,1528902482.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:02.648Z,1528902482.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:02.673Z,1528902482.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:03.045Z,1528902483.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:03.063Z,1528902483.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:03.427Z,1528902483.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:03.458Z,1528902483.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:03.828Z,1528902483.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:03.868Z,1528902483.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:04.231Z,1528902484.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:04.270Z,1528902484.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:04.641Z,1528902484.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:04.686Z,1528902484.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:05.041Z,1528902485.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:05.071Z,1528902485.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:05.441Z,1528902485.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:05.476Z,1528902485.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:05.831Z,1528902485.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:05.866Z,1528902485.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:09.031Z,1528902489.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:09.080Z,1528902489.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:09.199Z,1528902489.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:09.271Z,1528902489.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:09.620Z,1528902489.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:09.639Z,1528902489.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:10.014Z,1528902490.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:10.033Z,1528902490.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:10.410Z,1528902490.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:10.433Z,1528902490.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:10.796Z,1528902490.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:10.831Z,1528902490.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:11.195Z,1528902491.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:11.231Z,1528902491.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:11.596Z,1528902491.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:11.622Z,1528902491.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:11.995Z,1528902491.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:12.029Z,1528902492.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:12.405Z,1528902492.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:12.439Z,1528902492.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:12.810Z,1528902492.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:12.844Z,1528902492.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:13.209Z,1528902493.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:13.238Z,1528902493.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:13.595Z,1528902493.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:13.636Z,1528902493.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:13.999Z,1528902493.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:14.040Z,1528902494.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:14.394Z,1528902494.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:14.420Z,1528902494.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:14.796Z,1528902494.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:14.826Z,1528902494.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:15.200Z,1528902495.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:15.226Z,1528902495.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:15.610Z,1528902495.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:15.628Z,1528902495.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:16.010Z,1528902496.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:16.028Z,1528902496.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:16.410Z,1528902496.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:16.437Z,1528902496.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:16.802Z,1528902496.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:16.820Z,1528902496.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:17.203Z,1528902497.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:17.221Z,1528902497.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:17.595Z,1528902497.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:17.629Z,1528902497.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:17.998Z,1528902497.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:18.041Z,1528902498.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:18.406Z,1528902498.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:18.424Z,1528902498.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:18.810Z,1528902498.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:18.832Z,1528902498.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:19.210Z,1528902499.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:19.228Z,1528902499.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:19.595Z,1528902499.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:19.624Z,1528902499.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:19.999Z,1528902499.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:20.023Z,1528902500.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:20.391Z,1528902500.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:20.443Z,1528902500.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:20.796Z,1528902500.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:20.844Z,1528902500.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:21.195Z,1528902501.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:21.239Z,1528902501.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:21.616Z,1528902501.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:21.636Z,1528902501.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:22.010Z,1528902502.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:22.029Z,1528902502.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:22.415Z,1528902502.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:22.433Z,1528902502.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:22.795Z,1528902502.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:22.830Z,1528902502.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:23.191Z,1528902503.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:23.225Z,1528902503.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:23.596Z,1528902503.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:23.633Z,1528902503.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:23.995Z,1528902503.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:24.029Z,1528902504.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:24.406Z,1528902504.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:24.439Z,1528902504.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:24.809Z,1528902504.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:24.836Z,1528902504.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:25.209Z,1528902505.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:25.238Z,1528902505.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:25.595Z,1528902505.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:25.613Z,1528902505.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:25.999Z,1528902505.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:26.040Z,1528902506.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:26.402Z,1528902506.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:26.421Z,1528902506.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:26.796Z,1528902506.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:26.816Z,1528902506.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:27.198Z,1528902507.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:27.216Z,1528902507.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:27.609Z,1528902507.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:27.628Z,1528902507.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:28.009Z,1528902508.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:28.027Z,1528902508.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:28.406Z,1528902508.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:28.423Z,1528902508.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:28.801Z,1528902508.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:28.819Z,1528902508.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:29.198Z,1528902509.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:29.230Z,1528902509.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:29.600Z,1528902509.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:29.618Z,1528902509.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:30.001Z,1528902510.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:30.019Z,1528902510.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:30.378Z,1528902510.378 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T15:08:30.379Z,1528902510.379 [NAL9602] Data Fault, FailCount= 4
2018-06-13T15:08:30.379Z,1528902510.379 [NAL9602](ERROR): Data Fault
2018-06-13T15:08:30.403Z,1528902510.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:30.432Z,1528902510.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:30.521Z,1528902510.521 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T15:08:30.778Z,1528902510.778 [NAL9602](INFO): Powering down
2018-06-13T15:08:30.803Z,1528902510.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:30.834Z,1528902510.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:31.199Z,1528902511.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:31.229Z,1528902511.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:31.600Z,1528902511.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:31.618Z,1528902511.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:31.701Z,1528902511.701 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T15:08:31.701Z,1528902511.701 [NAL9602] No Fault, FailCount= 4
2018-06-13T15:08:31.993Z,1528902511.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:32.025Z,1528902512.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:32.400Z,1528902512.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:32.423Z,1528902512.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:32.797Z,1528902512.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:32.832Z,1528902512.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:33.200Z,1528902513.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:33.225Z,1528902513.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:33.596Z,1528902513.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:33.620Z,1528902513.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:33.997Z,1528902513.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:34.015Z,1528902514.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:34.398Z,1528902514.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:34.421Z,1528902514.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:34.800Z,1528902514.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:34.817Z,1528902514.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:35.196Z,1528902515.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:35.214Z,1528902515.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:35.598Z,1528902515.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:35.621Z,1528902515.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:35.000Z,1528902516.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:36.018Z,1528902516.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:36.400Z,1528902516.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:36.418Z,1528902516.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:36.798Z,1528902516.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:36.822Z,1528902516.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:37.200Z,1528902517.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:37.217Z,1528902517.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:37.596Z,1528902517.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:37.614Z,1528902517.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:37.000Z,1528902518.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:38.019Z,1528902518.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:38.398Z,1528902518.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:38.427Z,1528902518.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:38.801Z,1528902518.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:38.819Z,1528902518.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:39.198Z,1528902519.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:39.230Z,1528902519.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:39.590Z,1528902519.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:39.626Z,1528902519.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:40.000Z,1528902520.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:40.018Z,1528902520.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:40.400Z,1528902520.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:40.418Z,1528902520.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:40.798Z,1528902520.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:40.824Z,1528902520.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:41.200Z,1528902521.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:41.218Z,1528902521.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:41.598Z,1528902521.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:41.622Z,1528902521.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:42.000Z,1528902522.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:42.019Z,1528902522.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:42.400Z,1528902522.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:42.419Z,1528902522.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:42.798Z,1528902522.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:42.822Z,1528902522.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:43.201Z,1528902523.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:43.219Z,1528902523.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:43.601Z,1528902523.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:43.619Z,1528902523.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:43.998Z,1528902523.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:44.028Z,1528902524.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:44.391Z,1528902524.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:44.436Z,1528902524.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:44.795Z,1528902524.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:44.822Z,1528902524.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:45.195Z,1528902525.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:45.228Z,1528902525.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:45.596Z,1528902525.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:45.630Z,1528902525.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:45.995Z,1528902525.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:46.023Z,1528902526.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:46.395Z,1528902526.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:46.429Z,1528902526.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:46.794Z,1528902526.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:46.823Z,1528902526.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:47.190Z,1528902527.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:47.228Z,1528902527.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:47.594Z,1528902527.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:47.631Z,1528902527.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:47.994Z,1528902527.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:48.023Z,1528902528.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:48.398Z,1528902528.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:48.426Z,1528902528.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:48.794Z,1528902528.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:48.822Z,1528902528.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:49.194Z,1528902529.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:49.222Z,1528902529.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:49.594Z,1528902529.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:49.622Z,1528902529.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:49.994Z,1528902529.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:50.021Z,1528902530.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:50.395Z,1528902530.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:50.424Z,1528902530.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:50.794Z,1528902530.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:50.822Z,1528902530.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:51.194Z,1528902531.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:51.236Z,1528902531.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:51.594Z,1528902531.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:51.628Z,1528902531.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:51.994Z,1528902531.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:52.027Z,1528902532.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:52.394Z,1528902532.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:52.428Z,1528902532.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:52.794Z,1528902532.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:52.828Z,1528902532.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:53.195Z,1528902533.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:53.227Z,1528902533.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:53.595Z,1528902533.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:53.635Z,1528902533.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:53.995Z,1528902533.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:54.028Z,1528902534.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:54.394Z,1528902534.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:54.427Z,1528902534.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:54.794Z,1528902534.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:54.827Z,1528902534.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:55.195Z,1528902535.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:55.228Z,1528902535.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:55.594Z,1528902535.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:55.634Z,1528902535.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:55.994Z,1528902535.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:56.040Z,1528902536.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:56.395Z,1528902536.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:56.433Z,1528902536.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:56.795Z,1528902536.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:56.829Z,1528902536.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:57.195Z,1528902537.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:57.214Z,1528902537.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:57.595Z,1528902537.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:57.613Z,1528902537.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:57.995Z,1528902537.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:58.013Z,1528902538.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:58.394Z,1528902538.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:58.420Z,1528902538.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:58.797Z,1528902538.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:58.816Z,1528902538.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:59.193Z,1528902539.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:59.212Z,1528902539.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:59.598Z,1528902539.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:08:59.616Z,1528902539.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:08:59.994Z,1528902539.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:00.011Z,1528902540.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:00.393Z,1528902540.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:00.411Z,1528902540.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:00.782Z,1528902540.782 [NAL9602](INFO): Powering up NAL9602
2018-06-13T15:09:00.799Z,1528902540.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:00.816Z,1528902540.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:01.195Z,1528902541.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:01.213Z,1528902541.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:01.595Z,1528902541.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:01.613Z,1528902541.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:01.998Z,1528902541.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:02.016Z,1528902542.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:02.397Z,1528902542.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:02.415Z,1528902542.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:02.796Z,1528902542.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:02.814Z,1528902542.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:03.198Z,1528902543.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:03.216Z,1528902543.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:03.596Z,1528902543.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:03.620Z,1528902543.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:03.996Z,1528902543.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:04.014Z,1528902544.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:04.400Z,1528902544.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:04.424Z,1528902544.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:04.800Z,1528902544.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:04.818Z,1528902544.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:05.196Z,1528902545.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:05.214Z,1528902545.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:05.602Z,1528902545.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:05.620Z,1528902545.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:06.000Z,1528902546.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:06.018Z,1528902546.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:09.119Z,1528902549.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:09.164Z,1528902549.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:09.296Z,1528902549.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:09.352Z,1528902549.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:09.691Z,1528902549.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:09.709Z,1528902549.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:10.084Z,1528902550.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:10.120Z,1528902550.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:10.482Z,1528902550.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:10.516Z,1528902550.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:10.878Z,1528902550.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:10.920Z,1528902550.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:11.292Z,1528902551.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:11.321Z,1528902551.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:11.667Z,1528902551.667 [NAL9602](INFO): NAL9602 initialized
2018-06-13T15:09:11.683Z,1528902551.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:11.721Z,1528902551.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:12.078Z,1528902552.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:12.121Z,1528902552.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:12.497Z,1528902552.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:12.525Z,1528902552.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:12.897Z,1528902552.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:12.928Z,1528902552.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:13.293Z,1528902553.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:13.324Z,1528902553.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:13.679Z,1528902553.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:13.697Z,1528902553.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:14.083Z,1528902554.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:14.125Z,1528902554.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:14.482Z,1528902554.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:14.500Z,1528902554.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:14.883Z,1528902554.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:14.902Z,1528902554.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:15.283Z,1528902555.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:15.300Z,1528902555.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:15.697Z,1528902555.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:15.731Z,1528902555.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:16.101Z,1528902556.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:16.130Z,1528902556.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:16.505Z,1528902556.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:16.533Z,1528902556.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:16.888Z,1528902556.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:16.932Z,1528902556.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:17.286Z,1528902557.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:17.304Z,1528902557.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:17.687Z,1528902557.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:17.712Z,1528902557.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:18.085Z,1528902558.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:18.103Z,1528902558.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:18.497Z,1528902558.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:18.531Z,1528902558.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:18.902Z,1528902558.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:18.938Z,1528902558.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:19.297Z,1528902559.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:19.340Z,1528902559.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:19.685Z,1528902559.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:19.703Z,1528902559.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:20.086Z,1528902560.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:20.104Z,1528902560.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:20.483Z,1528902560.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:20.506Z,1528902560.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:20.889Z,1528902560.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:20.939Z,1528902560.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:21.287Z,1528902561.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:21.304Z,1528902561.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:21.697Z,1528902561.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:21.715Z,1528902561.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:22.097Z,1528902562.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:22.115Z,1528902562.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:22.494Z,1528902562.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:22.511Z,1528902562.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:22.888Z,1528902562.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:22.905Z,1528902562.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:23.289Z,1528902563.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:23.307Z,1528902563.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:23.688Z,1528902563.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:23.707Z,1528902563.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:24.087Z,1528902564.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:24.105Z,1528902564.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:24.497Z,1528902564.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:24.515Z,1528902564.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:24.897Z,1528902564.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:24.915Z,1528902564.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:25.293Z,1528902565.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:25.316Z,1528902565.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:25.690Z,1528902565.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:25.709Z,1528902565.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:26.088Z,1528902566.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:26.105Z,1528902566.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:26.501Z,1528902566.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:26.519Z,1528902566.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:26.897Z,1528902566.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:26.915Z,1528902566.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:27.293Z,1528902567.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:27.311Z,1528902567.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:27.688Z,1528902567.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:27.706Z,1528902567.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:28.090Z,1528902568.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:28.108Z,1528902568.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:28.498Z,1528902568.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:28.520Z,1528902568.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:28.897Z,1528902568.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:28.915Z,1528902568.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:29.298Z,1528902569.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:29.316Z,1528902569.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:29.690Z,1528902569.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:29.708Z,1528902569.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:30.088Z,1528902570.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:30.107Z,1528902570.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:30.498Z,1528902570.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:30.516Z,1528902570.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:30.897Z,1528902570.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:30.915Z,1528902570.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:31.297Z,1528902571.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:31.315Z,1528902571.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:31.691Z,1528902571.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:31.709Z,1528902571.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:32.087Z,1528902572.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:32.132Z,1528902572.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:32.499Z,1528902572.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:32.547Z,1528902572.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:32.900Z,1528902572.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:32.918Z,1528902572.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:33.299Z,1528902573.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:33.324Z,1528902573.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:33.687Z,1528902573.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:33.722Z,1528902573.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:34.083Z,1528902574.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:34.112Z,1528902574.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:34.500Z,1528902574.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:34.518Z,1528902574.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:34.904Z,1528902574.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:34.922Z,1528902574.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:35.306Z,1528902575.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:35.324Z,1528902575.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:35.683Z,1528902575.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:35.711Z,1528902575.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:36.083Z,1528902576.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:36.111Z,1528902576.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:36.504Z,1528902576.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:36.523Z,1528902576.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:36.903Z,1528902576.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:36.922Z,1528902576.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:37.299Z,1528902577.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:37.318Z,1528902577.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:37.684Z,1528902577.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:37.716Z,1528902577.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:38.084Z,1528902578.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:38.119Z,1528902578.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:38.499Z,1528902578.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:38.518Z,1528902578.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:38.904Z,1528902578.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:38.922Z,1528902578.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:39.300Z,1528902579.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:39.322Z,1528902579.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:39.684Z,1528902579.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:39.724Z,1528902579.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:40.084Z,1528902580.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:40.128Z,1528902580.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:40.500Z,1528902580.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:40.518Z,1528902580.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:40.905Z,1528902580.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:40.923Z,1528902580.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:41.301Z,1528902581.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:41.319Z,1528902581.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:41.684Z,1528902581.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:41.714Z,1528902581.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:42.083Z,1528902582.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:42.127Z,1528902582.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:42.501Z,1528902582.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:42.519Z,1528902582.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:42.908Z,1528902582.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:42.926Z,1528902582.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:43.297Z,1528902583.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:43.323Z,1528902583.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:43.683Z,1528902583.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:43.714Z,1528902583.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:44.083Z,1528902584.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:44.135Z,1528902584.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:44.494Z,1528902584.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:44.544Z,1528902584.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:44.894Z,1528902584.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:44.929Z,1528902584.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:45.297Z,1528902585.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:45.332Z,1528902585.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:45.684Z,1528902585.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:45.702Z,1528902585.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:46.083Z,1528902586.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:46.101Z,1528902586.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:46.497Z,1528902586.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:46.534Z,1528902586.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:46.897Z,1528902586.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:46.932Z,1528902586.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:47.293Z,1528902587.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:47.323Z,1528902587.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:47.687Z,1528902587.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:47.704Z,1528902587.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:48.086Z,1528902588.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:48.104Z,1528902588.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:48.497Z,1528902588.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:48.531Z,1528902588.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:48.897Z,1528902588.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:48.916Z,1528902588.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:49.294Z,1528902589.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:49.312Z,1528902589.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:49.690Z,1528902589.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:49.708Z,1528902589.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:50.088Z,1528902590.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:50.106Z,1528902590.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:50.493Z,1528902590.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:50.512Z,1528902590.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:50.897Z,1528902590.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:50.915Z,1528902590.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:51.294Z,1528902591.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:51.311Z,1528902591.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:51.689Z,1528902591.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:51.707Z,1528902591.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:52.088Z,1528902592.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:52.106Z,1528902592.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:52.493Z,1528902592.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:52.512Z,1528902592.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:52.897Z,1528902592.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:52.915Z,1528902592.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:53.297Z,1528902593.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:53.315Z,1528902593.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:53.688Z,1528902593.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:53.707Z,1528902593.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:54.088Z,1528902594.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:54.106Z,1528902594.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:54.497Z,1528902594.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:54.515Z,1528902594.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:54.897Z,1528902594.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:54.915Z,1528902594.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:55.293Z,1528902595.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:55.316Z,1528902595.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:55.690Z,1528902595.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:55.743Z,1528902595.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:56.087Z,1528902596.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:56.109Z,1528902596.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:56.495Z,1528902596.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:56.513Z,1528902596.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:56.897Z,1528902596.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:56.915Z,1528902596.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:57.297Z,1528902597.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:57.315Z,1528902597.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:57.689Z,1528902597.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:57.708Z,1528902597.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:58.086Z,1528902598.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:58.104Z,1528902598.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:58.495Z,1528902598.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:58.513Z,1528902598.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:58.897Z,1528902598.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:58.915Z,1528902598.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:59.295Z,1528902599.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:59.313Z,1528902599.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:09:59.688Z,1528902599.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:09:59.706Z,1528902599.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:00.087Z,1528902600.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:00.119Z,1528902600.119 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:00.119Z,1528902600.119 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 234
2018-06-13T15:10:00.119Z,1528902600.119 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:10:00.121Z,1528902600.121 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:00.122Z,1528902600.122 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 234
2018-06-13T15:10:00.122Z,1528902600.122 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:10:00.123Z,1528902600.123 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:00.123Z,1528902600.123 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 234
2018-06-13T15:10:00.123Z,1528902600.123 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:10:00.209Z,1528902600.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:10:00.209Z,1528902600.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:10:00.209Z,1528902600.209 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:10:00.479Z,1528902600.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:00.593Z,1528902600.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:10:00.593Z,1528902600.593 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 234
2018-06-13T15:10:00.594Z,1528902600.594 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:10:00.594Z,1528902600.594 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 234
2018-06-13T15:10:00.594Z,1528902600.594 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:10:00.594Z,1528902600.594 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 234
2018-06-13T15:10:00.898Z,1528902600.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:00.919Z,1528902600.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:10:00.919Z,1528902600.919 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:10:00.919Z,1528902600.919 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:10:00.920Z,1528902600.920 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:10:00.920Z,1528902600.920 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:10:00.920Z,1528902600.920 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:10:00.921Z,1528902600.921 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:10:00.921Z,1528902600.921 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:10:00.922Z,1528902600.922 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:10:01.299Z,1528902601.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:01.317Z,1528902601.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:10:01.318Z,1528902601.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:01.696Z,1528902601.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:01.721Z,1528902601.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:10:01.722Z,1528902601.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:02.083Z,1528902602.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:02.112Z,1528902602.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:10:02.113Z,1528902602.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:02.479Z,1528902602.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:02.515Z,1528902602.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:10:02.516Z,1528902602.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:02.883Z,1528902602.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:02.911Z,1528902602.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:10:02.912Z,1528902602.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:03.284Z,1528902603.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:03.312Z,1528902603.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:10:03.312Z,1528902603.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:03.693Z,1528902603.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:03.718Z,1528902603.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:10:03.719Z,1528902603.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:04.099Z,1528902604.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:04.117Z,1528902604.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:10:04.118Z,1528902604.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:04.498Z,1528902604.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:04.531Z,1528902604.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:10:04.532Z,1528902604.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:04.883Z,1528902604.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:04.911Z,1528902604.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:10:04.911Z,1528902604.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:05.283Z,1528902605.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:05.312Z,1528902605.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:10:05.313Z,1528902605.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:05.687Z,1528902605.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:05.714Z,1528902605.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:10:05.715Z,1528902605.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:06.083Z,1528902606.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:06.120Z,1528902606.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:10:06.121Z,1528902606.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:06.483Z,1528902606.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:06.511Z,1528902606.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:10:06.511Z,1528902606.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:06.899Z,1528902606.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:06.917Z,1528902606.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:10:06.918Z,1528902606.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:07.307Z,1528902607.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:07.332Z,1528902607.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:10:07.333Z,1528902607.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:07.704Z,1528902607.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:07.740Z,1528902607.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:10:07.740Z,1528902607.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:08.083Z,1528902608.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:08.115Z,1528902608.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:10:08.116Z,1528902608.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:08.483Z,1528902608.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:08.515Z,1528902608.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:10:08.516Z,1528902608.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:08.884Z,1528902608.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:08.916Z,1528902608.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:10:08.917Z,1528902608.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:09.283Z,1528902609.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:09.315Z,1528902609.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:10:09.316Z,1528902609.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:09.700Z,1528902609.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:09.718Z,1528902609.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:10:09.719Z,1528902609.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:10.109Z,1528902610.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:10.127Z,1528902610.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:10:10.127Z,1528902610.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:10.504Z,1528902610.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:10.528Z,1528902610.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:10:10.529Z,1528902610.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:13.611Z,1528902613.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:13.629Z,1528902613.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-06-13T15:10:13.630Z,1528902613.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:13.731Z,1528902613.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:13.771Z,1528902613.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T15:10:13.772Z,1528902613.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:14.156Z,1528902614.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:14.174Z,1528902614.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T15:10:14.175Z,1528902614.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:14.561Z,1528902614.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:14.578Z,1528902614.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T15:10:14.579Z,1528902614.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:14.956Z,1528902614.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:14.974Z,1528902614.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T15:10:14.975Z,1528902614.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:15.335Z,1528902615.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:15.373Z,1528902615.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T15:10:15.374Z,1528902615.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:15.737Z,1528902615.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:15.766Z,1528902615.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:10:15.767Z,1528902615.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:16.135Z,1528902616.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:16.169Z,1528902616.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:10:16.170Z,1528902616.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:16.550Z,1528902616.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:16.580Z,1528902616.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T15:10:16.585Z,1528902616.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:16.961Z,1528902616.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:16.979Z,1528902616.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T15:10:16.980Z,1528902616.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:17.346Z,1528902617.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:17.380Z,1528902617.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T15:10:17.385Z,1528902617.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:17.736Z,1528902617.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:17.766Z,1528902617.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:10:17.767Z,1528902617.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:18.139Z,1528902618.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:18.177Z,1528902618.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:10:18.178Z,1528902618.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:18.550Z,1528902618.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:18.583Z,1528902618.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T15:10:18.584Z,1528902618.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:18.954Z,1528902618.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:18.982Z,1528902618.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T15:10:18.983Z,1528902618.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:19.353Z,1528902619.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:19.388Z,1528902619.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T15:10:19.389Z,1528902619.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:19.739Z,1528902619.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:19.756Z,1528902619.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T15:10:19.757Z,1528902619.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:20.138Z,1528902620.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:20.162Z,1528902620.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:20.549Z,1528902620.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:20.596Z,1528902620.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:20.954Z,1528902620.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:20.991Z,1528902620.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:21.349Z,1528902621.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:21.367Z,1528902621.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:21.743Z,1528902621.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:21.761Z,1528902621.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:22.141Z,1528902622.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:22.159Z,1528902622.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:22.545Z,1528902622.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:22.564Z,1528902622.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:22.949Z,1528902622.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:22.968Z,1528902622.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:23.348Z,1528902623.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:23.372Z,1528902623.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:23.743Z,1528902623.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:23.764Z,1528902623.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:24.139Z,1528902624.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:24.172Z,1528902624.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:24.547Z,1528902624.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:24.565Z,1528902624.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:24.953Z,1528902624.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:24.995Z,1528902624.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:25.349Z,1528902625.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:25.368Z,1528902625.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:25.744Z,1528902625.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:25.762Z,1528902625.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:26.139Z,1528902626.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:26.171Z,1528902626.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:26.549Z,1528902626.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:26.568Z,1528902626.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:26.950Z,1528902626.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:26.972Z,1528902626.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:27.345Z,1528902627.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:27.364Z,1528902627.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:27.743Z,1528902627.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:27.762Z,1528902627.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:28.141Z,1528902628.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:28.160Z,1528902628.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:28.550Z,1528902628.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:28.568Z,1528902628.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:28.949Z,1528902628.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:28.976Z,1528902628.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:29.350Z,1528902629.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:29.370Z,1528902629.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:29.739Z,1528902629.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:29.762Z,1528902629.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:30.139Z,1528902630.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:30.164Z,1528902630.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:30.551Z,1528902630.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:30.570Z,1528902630.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:30.950Z,1528902630.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:30.972Z,1528902630.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:31.351Z,1528902631.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:31.370Z,1528902631.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:31.742Z,1528902631.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:31.760Z,1528902631.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:32.141Z,1528902632.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:32.164Z,1528902632.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:32.554Z,1528902632.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:32.576Z,1528902632.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:32.951Z,1528902632.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:32.976Z,1528902632.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:33.353Z,1528902633.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:33.404Z,1528902633.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:33.742Z,1528902633.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:33.760Z,1528902633.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:34.131Z,1528902634.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:34.168Z,1528902634.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:34.535Z,1528902634.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:34.571Z,1528902634.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:34.955Z,1528902634.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:34.980Z,1528902634.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:35.356Z,1528902635.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:35.374Z,1528902635.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:35.751Z,1528902635.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:35.769Z,1528902635.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:36.135Z,1528902636.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:36.178Z,1528902636.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:36.531Z,1528902636.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:36.567Z,1528902636.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:36.936Z,1528902636.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:36.970Z,1528902636.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:37.335Z,1528902637.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:37.370Z,1528902637.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:37.745Z,1528902637.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:37.773Z,1528902637.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:38.158Z,1528902638.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:38.176Z,1528902638.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:38.556Z,1528902638.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:38.574Z,1528902638.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:38.935Z,1528902638.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:38.973Z,1528902638.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:39.335Z,1528902639.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:39.352Z,1528902639.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:39.736Z,1528902639.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:39.754Z,1528902639.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:40.137Z,1528902640.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:40.154Z,1528902640.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:40.538Z,1528902640.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:40.556Z,1528902640.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:40.950Z,1528902640.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:40.983Z,1528902640.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:41.349Z,1528902641.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:41.383Z,1528902641.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:41.749Z,1528902641.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:41.782Z,1528902641.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:42.138Z,1528902642.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:42.157Z,1528902642.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:42.534Z,1528902642.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:42.552Z,1528902642.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:42.939Z,1528902642.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:42.964Z,1528902642.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:43.338Z,1528902643.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:43.356Z,1528902643.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:43.749Z,1528902643.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:43.787Z,1528902643.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:44.149Z,1528902644.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:44.168Z,1528902644.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:44.550Z,1528902644.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:44.568Z,1528902644.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:44.941Z,1528902644.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:44.959Z,1528902644.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:45.340Z,1528902645.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:45.358Z,1528902645.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:45.742Z,1528902645.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:45.767Z,1528902645.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:46.142Z,1528902646.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:46.196Z,1528902646.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:46.540Z,1528902646.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:46.558Z,1528902646.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:46.950Z,1528902646.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:46.968Z,1528902646.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:47.346Z,1528902647.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:47.368Z,1528902647.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:47.746Z,1528902647.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:47.768Z,1528902647.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:48.142Z,1528902648.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:48.160Z,1528902648.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:48.541Z,1528902648.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:48.559Z,1528902648.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:48.939Z,1528902648.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:48.971Z,1528902648.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:49.339Z,1528902649.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:49.372Z,1528902649.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:49.746Z,1528902649.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:49.764Z,1528902649.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:50.150Z,1528902650.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:50.167Z,1528902650.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:50.551Z,1528902650.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:50.576Z,1528902650.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:50.941Z,1528902650.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:50.959Z,1528902650.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:51.339Z,1528902651.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:51.362Z,1528902651.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:51.740Z,1528902651.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:51.766Z,1528902651.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:52.135Z,1528902652.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:52.159Z,1528902652.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:52.539Z,1528902652.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:52.562Z,1528902652.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:52.951Z,1528902652.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:52.969Z,1528902652.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:53.354Z,1528902653.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:53.376Z,1528902653.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:53.755Z,1528902653.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:53.773Z,1528902653.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:54.132Z,1528902654.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:54.174Z,1528902654.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:54.542Z,1528902654.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:54.560Z,1528902654.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:54.940Z,1528902654.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:54.966Z,1528902654.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:55.339Z,1528902655.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:55.365Z,1528902655.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:55.752Z,1528902655.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:55.775Z,1528902655.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:56.154Z,1528902656.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:56.172Z,1528902656.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:56.556Z,1528902656.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:56.576Z,1528902656.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:56.941Z,1528902656.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:56.964Z,1528902656.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:57.339Z,1528902657.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:57.363Z,1528902657.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:57.742Z,1528902657.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:57.766Z,1528902657.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:58.142Z,1528902658.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:58.160Z,1528902658.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:58.540Z,1528902658.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:58.581Z,1528902658.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:58.956Z,1528902658.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:59.008Z,1528902659.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:59.355Z,1528902659.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:59.374Z,1528902659.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:10:59.751Z,1528902659.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:10:59.769Z,1528902659.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:00.135Z,1528902660.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:00.176Z,1528902660.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:00.535Z,1528902660.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:00.573Z,1528902660.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:00.935Z,1528902660.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:00.970Z,1528902660.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:01.339Z,1528902661.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:01.377Z,1528902661.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:01.745Z,1528902661.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:01.779Z,1528902661.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:02.153Z,1528902662.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:02.186Z,1528902662.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:02.549Z,1528902662.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:02.587Z,1528902662.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:02.938Z,1528902662.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:02.956Z,1528902662.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:03.339Z,1528902663.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:03.357Z,1528902663.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:03.742Z,1528902663.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:03.760Z,1528902663.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:04.139Z,1528902664.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:04.157Z,1528902664.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:04.539Z,1528902664.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:04.573Z,1528902664.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:04.949Z,1528902664.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:04.972Z,1528902664.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:05.351Z,1528902665.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:05.385Z,1528902665.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:05.756Z,1528902665.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:05.774Z,1528902665.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:06.147Z,1528902666.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:06.165Z,1528902666.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:09.265Z,1528902669.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:09.284Z,1528902669.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:09.427Z,1528902669.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:09.455Z,1528902669.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:09.829Z,1528902669.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:09.858Z,1528902669.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:10.233Z,1528902670.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:10.259Z,1528902670.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:10.629Z,1528902670.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:10.654Z,1528902670.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:11.019Z,1528902671.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:11.037Z,1528902671.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:11.418Z,1528902671.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:11.443Z,1528902671.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:11.820Z,1528902671.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:11.854Z,1528902671.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:12.220Z,1528902672.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:12.238Z,1528902672.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:12.623Z,1528902672.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:12.641Z,1528902672.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:13.030Z,1528902673.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:13.068Z,1528902673.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:13.430Z,1528902673.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:13.448Z,1528902673.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:13.816Z,1528902673.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:13.847Z,1528902673.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:14.219Z,1528902674.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:14.248Z,1528902674.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:14.632Z,1528902674.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:14.650Z,1528902674.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:15.031Z,1528902675.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:15.049Z,1528902675.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:15.430Z,1528902675.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:15.448Z,1528902675.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:15.819Z,1528902675.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:15.845Z,1528902675.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:16.223Z,1528902676.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:16.268Z,1528902676.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:16.630Z,1528902676.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:16.653Z,1528902676.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:17.031Z,1528902677.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:17.048Z,1528902677.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:17.427Z,1528902677.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:17.446Z,1528902677.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:17.820Z,1528902677.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:17.850Z,1528902677.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:18.212Z,1528902678.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:18.240Z,1528902678.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:18.634Z,1528902678.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:18.660Z,1528902678.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:19.034Z,1528902679.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:19.052Z,1528902679.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:19.432Z,1528902679.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:19.456Z,1528902679.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:19.822Z,1528902679.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:19.840Z,1528902679.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:20.223Z,1528902680.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:20.248Z,1528902680.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:20.635Z,1528902680.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:20.660Z,1528902680.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:21.035Z,1528902681.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:21.053Z,1528902681.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:21.435Z,1528902681.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:21.452Z,1528902681.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:21.812Z,1528902681.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:21.844Z,1528902681.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:22.223Z,1528902682.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:22.242Z,1528902682.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:22.622Z,1528902682.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:22.640Z,1528902682.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:23.035Z,1528902683.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:23.059Z,1528902683.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:23.435Z,1528902683.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:23.460Z,1528902683.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:23.835Z,1528902683.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:23.852Z,1528902683.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:24.212Z,1528902684.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:24.240Z,1528902684.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:24.622Z,1528902684.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:24.640Z,1528902684.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:25.024Z,1528902685.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:25.042Z,1528902685.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:25.422Z,1528902685.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:25.440Z,1528902685.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:25.835Z,1528902685.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:25.860Z,1528902685.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:26.235Z,1528902686.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:26.252Z,1528902686.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:26.632Z,1528902686.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:26.650Z,1528902686.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:27.011Z,1528902687.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:27.057Z,1528902687.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:27.415Z,1528902687.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:27.443Z,1528902687.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:27.815Z,1528902687.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:27.844Z,1528902687.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:28.217Z,1528902688.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:28.245Z,1528902688.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:28.615Z,1528902688.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:28.643Z,1528902688.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:29.036Z,1528902689.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:29.055Z,1528902689.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:29.436Z,1528902689.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:29.460Z,1528902689.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:29.836Z,1528902689.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:29.854Z,1528902689.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:30.216Z,1528902690.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:30.244Z,1528902690.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:30.615Z,1528902690.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:30.642Z,1528902690.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:31.016Z,1528902691.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:31.048Z,1528902691.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:31.415Z,1528902691.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:31.444Z,1528902691.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:31.837Z,1528902691.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:31.855Z,1528902691.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:32.236Z,1528902692.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:32.254Z,1528902692.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:32.631Z,1528902692.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:32.649Z,1528902692.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:33.016Z,1528902693.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:33.043Z,1528902693.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:33.415Z,1528902693.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:33.443Z,1528902693.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:33.815Z,1528902693.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:33.845Z,1528902693.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:34.216Z,1528902694.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:34.245Z,1528902694.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:34.616Z,1528902694.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:34.646Z,1528902694.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:35.032Z,1528902695.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:35.050Z,1528902695.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:35.431Z,1528902695.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:35.449Z,1528902695.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:35.836Z,1528902695.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:35.854Z,1528902695.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:36.212Z,1528902696.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:36.248Z,1528902696.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:36.616Z,1528902696.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:36.649Z,1528902696.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:37.016Z,1528902697.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:37.050Z,1528902697.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:37.416Z,1528902697.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:37.448Z,1528902697.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:37.836Z,1528902697.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:37.854Z,1528902697.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:38.234Z,1528902698.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:38.260Z,1528902698.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:38.638Z,1528902698.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:38.655Z,1528902698.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:39.016Z,1528902699.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:39.050Z,1528902699.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:39.416Z,1528902699.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:39.450Z,1528902699.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:39.816Z,1528902699.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:39.863Z,1528902699.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:40.217Z,1528902700.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:40.235Z,1528902700.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:40.618Z,1528902700.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:40.659Z,1528902700.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:41.029Z,1528902701.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:41.056Z,1528902701.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:41.433Z,1528902701.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:41.460Z,1528902701.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:41.829Z,1528902701.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:41.855Z,1528902701.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:42.219Z,1528902702.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:42.253Z,1528902702.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:42.616Z,1528902702.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:42.634Z,1528902702.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:43.020Z,1528902703.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:43.064Z,1528902703.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:43.419Z,1528902703.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:43.444Z,1528902703.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:43.830Z,1528902703.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:43.864Z,1528902703.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:44.238Z,1528902704.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:44.270Z,1528902704.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:44.634Z,1528902704.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:44.672Z,1528902704.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:45.021Z,1528902705.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:45.040Z,1528902705.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:45.420Z,1528902705.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:45.442Z,1528902705.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:45.823Z,1528902705.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:45.842Z,1528902705.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:46.224Z,1528902706.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:46.242Z,1528902706.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:46.619Z,1528902706.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:46.651Z,1528902706.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:47.029Z,1528902707.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:47.047Z,1528902707.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:47.426Z,1528902707.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:47.448Z,1528902707.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:47.829Z,1528902707.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:47.874Z,1528902707.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:48.225Z,1528902708.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:48.243Z,1528902708.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:48.619Z,1528902708.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:48.637Z,1528902708.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:49.020Z,1528902709.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:49.051Z,1528902709.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:49.419Z,1528902709.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:49.454Z,1528902709.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:49.832Z,1528902709.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:49.850Z,1528902709.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:50.231Z,1528902710.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:50.256Z,1528902710.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:50.632Z,1528902710.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:50.656Z,1528902710.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:51.018Z,1528902711.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:51.042Z,1528902711.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:51.422Z,1528902711.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:51.440Z,1528902711.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:51.819Z,1528902711.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:51.845Z,1528902711.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:52.219Z,1528902712.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:52.238Z,1528902712.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:52.619Z,1528902712.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:52.643Z,1528902712.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:53.033Z,1528902713.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:53.052Z,1528902713.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:53.431Z,1528902713.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:53.473Z,1528902713.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:53.831Z,1528902713.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:53.848Z,1528902713.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:54.214Z,1528902714.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:54.252Z,1528902714.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:54.611Z,1528902714.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:54.639Z,1528902714.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:55.020Z,1528902715.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:55.045Z,1528902715.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:55.419Z,1528902715.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:55.445Z,1528902715.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:55.835Z,1528902715.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:55.853Z,1528902715.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:56.235Z,1528902716.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:56.252Z,1528902716.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:56.635Z,1528902716.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:56.653Z,1528902716.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:57.011Z,1528902717.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:57.039Z,1528902717.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:57.422Z,1528902717.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:57.440Z,1528902717.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:57.823Z,1528902717.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:57.847Z,1528902717.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:58.223Z,1528902718.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:58.241Z,1528902718.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:58.622Z,1528902718.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:58.640Z,1528902718.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:59.035Z,1528902719.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:59.053Z,1528902719.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:59.432Z,1528902719.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:59.456Z,1528902719.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:11:59.835Z,1528902719.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:11:59.868Z,1528902719.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:00.216Z,1528902720.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:00.246Z,1528902720.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:00.615Z,1528902720.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:00.643Z,1528902720.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:01.024Z,1528902721.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:01.042Z,1528902721.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:01.415Z,1528902721.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:01.444Z,1528902721.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:01.835Z,1528902721.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:01.854Z,1528902721.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:02.235Z,1528902722.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:02.253Z,1528902722.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:02.636Z,1528902722.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:02.654Z,1528902722.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:03.015Z,1528902723.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:03.043Z,1528902723.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:03.415Z,1528902723.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:03.452Z,1528902723.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:03.816Z,1528902723.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:03.846Z,1528902723.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:04.216Z,1528902724.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:04.244Z,1528902724.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:04.615Z,1528902724.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:04.646Z,1528902724.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:05.036Z,1528902725.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:05.055Z,1528902725.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:05.431Z,1528902725.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:05.448Z,1528902725.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:05.835Z,1528902725.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:05.852Z,1528902725.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:06.216Z,1528902726.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:06.247Z,1528902726.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:06.254Z,1528902726.254 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T15:07:06.2Z
2018-06-13T15:12:06.254Z,1528902726.254 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T15:12:06.254Z,1528902726.254 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T15:12:09.341Z,1528902729.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:09.360Z,1528902729.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:10.399Z,1528902730.399 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0272.lzma
2018-06-13T15:12:10.420Z,1528902730.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:10.452Z,1528902730.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:10.569Z,1528902730.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:10.613Z,1528902730.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:10.942Z,1528902730.942 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0272.lzma.bak
2018-06-13T15:12:10.942Z,1528902730.942 [DataOverHttps](INFO): SBD MOMSN=8329434
2018-06-13T15:12:10.994Z,1528902730.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:11.032Z,1528902731.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:12.857Z,1528902732.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:12.876Z,1528902732.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:13.009Z,1528902733.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:13.027Z,1528902733.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:13.410Z,1528902733.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:13.432Z,1528902733.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:13.810Z,1528902733.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:13.828Z,1528902733.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:14.212Z,1528902734.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:14.230Z,1528902734.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:17.325Z,1528902737.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:17.360Z,1528902737.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:17.486Z,1528902737.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:17.528Z,1528902737.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:17.899Z,1528902737.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:17.917Z,1528902737.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:18.294Z,1528902738.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:18.335Z,1528902738.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:18.679Z,1528902738.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:18.713Z,1528902738.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:19.080Z,1528902739.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:19.098Z,1528902739.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:19.483Z,1528902739.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:19.502Z,1528902739.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:19.889Z,1528902739.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:19.907Z,1528902739.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:20.293Z,1528902740.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:20.327Z,1528902740.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:20.694Z,1528902740.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:20.711Z,1528902740.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:21.084Z,1528902741.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:21.108Z,1528902741.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:21.482Z,1528902741.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:21.508Z,1528902741.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:21.886Z,1528902741.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:21.904Z,1528902741.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:22.280Z,1528902742.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:22.307Z,1528902742.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:22.685Z,1528902742.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:22.708Z,1528902742.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:25.810Z,1528902745.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:25.845Z,1528902745.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:25.945Z,1528902745.945 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0273.lzma
2018-06-13T15:12:25.987Z,1528902745.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:26.034Z,1528902746.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:26.387Z,1528902746.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:26.412Z,1528902746.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:26.746Z,1528902746.746 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0273.lzma.bak
2018-06-13T15:12:26.746Z,1528902746.746 [DataOverHttps](INFO): SBD MOMSN=8329436
2018-06-13T15:12:26.791Z,1528902746.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:26.810Z,1528902746.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:28.663Z,1528902748.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:28.696Z,1528902748.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:28.699Z,1528902748.699 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T15:12:28.699Z,1528902748.699 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T15:12:28.699Z,1528902748.699 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T15:12:28.815Z,1528902748.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:28.864Z,1528902748.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:32.075Z,1528902752.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:32.094Z,1528902752.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:32.229Z,1528902752.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:32.254Z,1528902752.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:32.636Z,1528902752.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:32.654Z,1528902752.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:33.016Z,1528902753.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:33.051Z,1528902753.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:33.408Z,1528902753.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:33.448Z,1528902753.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:33.811Z,1528902753.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:33.841Z,1528902753.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:34.213Z,1528902754.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:34.231Z,1528902754.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:34.609Z,1528902754.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:34.628Z,1528902754.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:35.025Z,1528902755.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:35.064Z,1528902755.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:35.429Z,1528902755.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:35.458Z,1528902755.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:35.829Z,1528902755.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:35.857Z,1528902755.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:36.216Z,1528902756.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:36.234Z,1528902756.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:36.611Z,1528902756.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:36.631Z,1528902756.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:37.012Z,1528902757.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:37.106Z,1528902757.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:37.415Z,1528902757.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:37.528Z,1528902757.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:37.828Z,1528902757.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:38.054Z,1528902758.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:38.245Z,1528902758.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:38.324Z,1528902758.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:38.646Z,1528902758.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:38.730Z,1528902758.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:39.031Z,1528902759.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:39.048Z,1528902759.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:39.432Z,1528902759.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:39.450Z,1528902759.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:39.835Z,1528902759.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:39.852Z,1528902759.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:40.235Z,1528902760.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:40.252Z,1528902760.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:40.630Z,1528902760.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:40.648Z,1528902760.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:41.045Z,1528902761.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:41.077Z,1528902761.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:41.446Z,1528902761.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:41.479Z,1528902761.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:41.841Z,1528902761.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:41.875Z,1528902761.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:42.235Z,1528902762.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:42.253Z,1528902762.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:42.630Z,1528902762.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:42.652Z,1528902762.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:43.031Z,1528902763.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:43.049Z,1528902763.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:43.434Z,1528902763.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:43.453Z,1528902763.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:43.841Z,1528902763.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:43.859Z,1528902763.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:44.245Z,1528902764.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:44.279Z,1528902764.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:44.645Z,1528902764.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:44.663Z,1528902764.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:45.036Z,1528902765.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:45.054Z,1528902765.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:45.431Z,1528902765.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:45.462Z,1528902765.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:45.836Z,1528902765.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:45.854Z,1528902765.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:46.235Z,1528902766.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:46.260Z,1528902766.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:46.636Z,1528902766.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:46.654Z,1528902766.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:47.041Z,1528902767.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:47.059Z,1528902767.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:47.445Z,1528902767.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:47.462Z,1528902767.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:47.842Z,1528902767.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:47.859Z,1528902767.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:48.236Z,1528902768.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:48.255Z,1528902768.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:48.634Z,1528902768.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:48.651Z,1528902768.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:49.037Z,1528902769.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:49.055Z,1528902769.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:49.436Z,1528902769.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:49.454Z,1528902769.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:49.845Z,1528902769.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:49.863Z,1528902769.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:50.242Z,1528902770.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:50.259Z,1528902770.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:50.641Z,1528902770.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:50.659Z,1528902770.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:51.035Z,1528902771.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:51.053Z,1528902771.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:51.431Z,1528902771.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:51.464Z,1528902771.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:51.835Z,1528902771.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:51.865Z,1528902771.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:52.238Z,1528902772.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:52.256Z,1528902772.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:52.631Z,1528902772.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:52.654Z,1528902772.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:53.048Z,1528902773.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:53.066Z,1528902773.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:53.447Z,1528902773.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:53.464Z,1528902773.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:53.844Z,1528902773.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:53.868Z,1528902773.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:54.235Z,1528902774.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:54.258Z,1528902774.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:54.638Z,1528902774.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:54.655Z,1528902774.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:55.031Z,1528902775.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:55.055Z,1528902775.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:55.435Z,1528902775.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:55.458Z,1528902775.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:55.847Z,1528902775.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:55.865Z,1528902775.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:56.246Z,1528902776.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:56.268Z,1528902776.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:56.647Z,1528902776.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:56.665Z,1528902776.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:57.038Z,1528902777.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:57.055Z,1528902777.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:57.430Z,1528902777.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:57.463Z,1528902777.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:57.836Z,1528902777.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:57.859Z,1528902777.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:58.239Z,1528902778.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:58.256Z,1528902778.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:58.631Z,1528902778.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:58.655Z,1528902778.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:59.046Z,1528902779.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:59.064Z,1528902779.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:59.447Z,1528902779.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:59.465Z,1528902779.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:12:59.847Z,1528902779.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:12:59.872Z,1528902779.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:00.238Z,1528902780.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:00.256Z,1528902780.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:00.639Z,1528902780.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:00.656Z,1528902780.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:01.034Z,1528902781.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:01.068Z,1528902781.068 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:01.068Z,1528902781.068 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 235
2018-06-13T15:13:01.068Z,1528902781.068 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:13:01.070Z,1528902781.070 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:01.070Z,1528902781.070 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 235
2018-06-13T15:13:01.070Z,1528902781.070 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:13:01.072Z,1528902781.072 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:01.072Z,1528902781.072 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 235
2018-06-13T15:13:01.072Z,1528902781.072 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:13:01.157Z,1528902781.157 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:13:01.157Z,1528902781.157 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:13:01.158Z,1528902781.158 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:13:01.435Z,1528902781.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:01.541Z,1528902781.541 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:13:01.541Z,1528902781.541 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 235
2018-06-13T15:13:01.542Z,1528902781.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:13:01.542Z,1528902781.542 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 235
2018-06-13T15:13:01.542Z,1528902781.542 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:13:01.542Z,1528902781.542 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 235
2018-06-13T15:13:01.847Z,1528902781.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:01.871Z,1528902781.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:13:01.872Z,1528902781.872 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:13:01.872Z,1528902781.872 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:13:01.873Z,1528902781.873 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:13:01.873Z,1528902781.873 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:13:01.873Z,1528902781.873 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:13:01.874Z,1528902781.874 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:13:01.874Z,1528902781.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:13:01.874Z,1528902781.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:13:02.252Z,1528902782.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:02.270Z,1528902782.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:13:02.271Z,1528902782.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:02.649Z,1528902782.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:02.666Z,1528902782.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:13:02.667Z,1528902782.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:03.031Z,1528902783.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:03.060Z,1528902783.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:13:03.061Z,1528902783.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:03.431Z,1528902783.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:03.464Z,1528902783.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:13:03.465Z,1528902783.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:03.831Z,1528902783.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:03.867Z,1528902783.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:13:03.868Z,1528902783.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:04.231Z,1528902784.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:04.260Z,1528902784.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:13:04.261Z,1528902784.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:04.641Z,1528902784.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:04.660Z,1528902784.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:13:04.661Z,1528902784.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:05.052Z,1528902785.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:05.076Z,1528902785.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:13:05.077Z,1528902785.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:05.453Z,1528902785.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:05.470Z,1528902785.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:13:05.471Z,1528902785.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:05.849Z,1528902785.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:05.866Z,1528902785.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:13:05.867Z,1528902785.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:06.243Z,1528902786.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:06.260Z,1528902786.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:13:06.261Z,1528902786.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:06.635Z,1528902786.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:06.672Z,1528902786.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:13:06.673Z,1528902786.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:07.028Z,1528902787.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:07.058Z,1528902787.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:13:07.059Z,1528902787.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:07.432Z,1528902787.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:07.468Z,1528902787.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:13:07.469Z,1528902787.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:07.846Z,1528902787.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:07.871Z,1528902787.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:13:07.872Z,1528902787.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:08.254Z,1528902788.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:08.272Z,1528902788.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:13:08.273Z,1528902788.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:08.646Z,1528902788.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:08.670Z,1528902788.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:13:08.671Z,1528902788.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:09.031Z,1528902789.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:09.069Z,1528902789.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:13:09.070Z,1528902789.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:09.428Z,1528902789.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:09.462Z,1528902789.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:13:09.462Z,1528902789.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:09.852Z,1528902789.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:09.870Z,1528902789.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:13:09.871Z,1528902789.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:10.253Z,1528902790.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:10.271Z,1528902790.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:13:10.272Z,1528902790.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:10.637Z,1528902790.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:10.664Z,1528902790.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:13:10.666Z,1528902790.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:11.034Z,1528902791.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:11.067Z,1528902791.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:13:11.068Z,1528902791.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:11.433Z,1528902791.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:11.469Z,1528902791.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:13:11.470Z,1528902791.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:11.841Z,1528902791.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:11.875Z,1528902791.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:13:11.876Z,1528902791.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:12.253Z,1528902792.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:12.270Z,1528902792.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T15:13:12.271Z,1528902792.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:12.642Z,1528902792.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:12.679Z,1528902792.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T15:13:12.680Z,1528902792.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:13.031Z,1528902793.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:13.065Z,1528902793.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T15:13:13.066Z,1528902793.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:13.435Z,1528902793.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:13.468Z,1528902793.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T15:13:13.473Z,1528902793.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:13.841Z,1528902793.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:13.878Z,1528902793.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T15:13:13.879Z,1528902793.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:14.247Z,1528902794.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:14.274Z,1528902794.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T15:13:14.275Z,1528902794.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:14.645Z,1528902794.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:14.672Z,1528902794.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T15:13:14.673Z,1528902794.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:15.035Z,1528902795.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:15.052Z,1528902795.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T15:13:15.080Z,1528902795.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:15.431Z,1528902795.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:15.448Z,1528902795.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T15:13:15.449Z,1528902795.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:15.843Z,1528902795.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:15.878Z,1528902795.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T15:13:15.879Z,1528902795.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:16.250Z,1528902796.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:16.278Z,1528902796.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T15:13:16.279Z,1528902796.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:16.649Z,1528902796.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:16.676Z,1528902796.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:13:16.677Z,1528902796.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:17.035Z,1528902797.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:17.053Z,1528902797.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:13:17.054Z,1528902797.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:17.437Z,1528902797.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:17.454Z,1528902797.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T15:13:17.455Z,1528902797.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:17.842Z,1528902797.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:17.880Z,1528902797.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T15:13:17.885Z,1528902797.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:18.249Z,1528902798.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:18.282Z,1528902798.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:13:18.283Z,1528902798.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:18.649Z,1528902798.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:18.666Z,1528902798.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:13:18.667Z,1528902798.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:19.037Z,1528902799.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:19.055Z,1528902799.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:13:19.056Z,1528902799.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:19.435Z,1528902799.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:19.465Z,1528902799.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T15:13:19.466Z,1528902799.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:19.848Z,1528902799.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:19.866Z,1528902799.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T15:13:19.867Z,1528902799.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:20.250Z,1528902800.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:20.276Z,1528902800.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T15:13:20.277Z,1528902800.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:20.652Z,1528902800.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:20.670Z,1528902800.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T15:13:20.671Z,1528902800.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:21.043Z,1528902801.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:21.060Z,1528902801.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T15:13:21.061Z,1528902801.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:21.436Z,1528902801.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:21.454Z,1528902801.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:21.851Z,1528902801.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:21.876Z,1528902801.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:22.254Z,1528902802.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:22.272Z,1528902802.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:22.647Z,1528902802.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:22.665Z,1528902802.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:23.040Z,1528902803.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:23.074Z,1528902803.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:23.432Z,1528902803.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:23.459Z,1528902803.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:23.856Z,1528902803.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:23.874Z,1528902803.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:24.253Z,1528902804.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:24.271Z,1528902804.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:24.649Z,1528902804.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:24.667Z,1528902804.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:25.038Z,1528902805.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:25.063Z,1528902805.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:25.431Z,1528902805.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:25.462Z,1528902805.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:25.853Z,1528902805.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:25.883Z,1528902805.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:26.246Z,1528902806.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:26.276Z,1528902806.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:26.651Z,1528902806.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:26.668Z,1528902806.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:27.032Z,1528902807.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:27.072Z,1528902807.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:27.427Z,1528902807.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:27.458Z,1528902807.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:27.847Z,1528902807.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:27.872Z,1528902807.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:28.252Z,1528902808.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:28.276Z,1528902808.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:28.655Z,1528902808.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:28.680Z,1528902808.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:29.047Z,1528902809.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:29.065Z,1528902809.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:29.445Z,1528902809.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:29.463Z,1528902809.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:32.562Z,1528902812.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:32.580Z,1528902812.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:32.729Z,1528902812.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:32.755Z,1528902812.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:33.130Z,1528902813.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:33.159Z,1528902813.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:33.516Z,1528902813.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:33.534Z,1528902813.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:33.915Z,1528902813.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:33.933Z,1528902813.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:34.315Z,1528902814.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:34.332Z,1528902814.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:34.714Z,1528902814.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:34.732Z,1528902814.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:35.125Z,1528902815.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:35.159Z,1528902815.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:35.525Z,1528902815.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:35.543Z,1528902815.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:35.918Z,1528902815.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:35.944Z,1528902815.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:36.316Z,1528902816.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:36.340Z,1528902816.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:36.718Z,1528902816.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:36.736Z,1528902816.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:37.117Z,1528902817.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:37.135Z,1528902817.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:37.516Z,1528902817.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:37.534Z,1528902817.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:37.925Z,1528902817.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:37.944Z,1528902817.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:38.325Z,1528902818.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:38.343Z,1528902818.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:38.725Z,1528902818.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:38.743Z,1528902818.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:39.117Z,1528902819.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:39.135Z,1528902819.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:39.517Z,1528902819.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:39.535Z,1528902819.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:39.915Z,1528902819.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:39.937Z,1528902819.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:40.316Z,1528902820.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:40.343Z,1528902820.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:40.712Z,1528902820.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:40.735Z,1528902820.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:41.126Z,1528902821.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:41.144Z,1528902821.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:41.527Z,1528902821.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:41.545Z,1528902821.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:41.926Z,1528902821.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:41.948Z,1528902821.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:42.315Z,1528902822.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:42.345Z,1528902822.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:42.711Z,1528902822.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:42.746Z,1528902822.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:43.108Z,1528902823.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:43.145Z,1528902823.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:43.515Z,1528902823.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:43.548Z,1528902823.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:43.933Z,1528902823.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:43.951Z,1528902823.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:44.321Z,1528902824.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:44.355Z,1528902824.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:44.721Z,1528902824.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:44.756Z,1528902824.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:45.111Z,1528902825.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:45.142Z,1528902825.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:45.508Z,1528902825.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:45.526Z,1528902825.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:45.911Z,1528902825.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:45.929Z,1528902825.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:46.312Z,1528902826.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:46.348Z,1528902826.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:46.710Z,1528902826.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:46.748Z,1528902826.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:47.125Z,1528902827.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:47.143Z,1528902827.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:47.530Z,1528902827.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:47.568Z,1528902827.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:47.922Z,1528902827.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:47.940Z,1528902827.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:48.317Z,1528902828.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:48.335Z,1528902828.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:48.718Z,1528902828.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:48.736Z,1528902828.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:49.117Z,1528902829.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:49.135Z,1528902829.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:49.516Z,1528902829.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:49.548Z,1528902829.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:49.926Z,1528902829.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:49.967Z,1528902829.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:50.326Z,1528902830.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:50.344Z,1528902830.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:50.723Z,1528902830.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:50.742Z,1528902830.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:51.118Z,1528902831.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:51.136Z,1528902831.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:51.511Z,1528902831.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:51.534Z,1528902831.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:51.915Z,1528902831.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:51.947Z,1528902831.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:52.323Z,1528902832.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:52.342Z,1528902832.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:52.718Z,1528902832.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:52.736Z,1528902832.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:53.123Z,1528902833.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:53.142Z,1528902833.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:53.525Z,1528902833.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:53.544Z,1528902833.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:53.922Z,1528902833.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:53.940Z,1528902833.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:54.319Z,1528902834.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:54.338Z,1528902834.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:54.719Z,1528902834.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:54.736Z,1528902834.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:55.118Z,1528902835.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:55.136Z,1528902835.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:55.515Z,1528902835.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:55.538Z,1528902835.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:55.925Z,1528902835.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:55.944Z,1528902835.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:56.325Z,1528902836.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:56.344Z,1528902836.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:56.722Z,1528902836.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:56.753Z,1528902836.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:57.108Z,1528902837.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:57.148Z,1528902837.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:57.514Z,1528902837.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:57.544Z,1528902837.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:57.911Z,1528902837.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:57.937Z,1528902837.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:58.308Z,1528902838.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:58.359Z,1528902838.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:58.708Z,1528902838.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:58.734Z,1528902838.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:59.127Z,1528902839.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:59.153Z,1528902839.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:59.531Z,1528902839.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:59.556Z,1528902839.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:13:59.927Z,1528902839.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:13:59.945Z,1528902839.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:00.315Z,1528902840.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:00.345Z,1528902840.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:00.722Z,1528902840.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:00.739Z,1528902840.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:01.112Z,1528902841.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:01.139Z,1528902841.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:01.511Z,1528902841.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:01.545Z,1528902841.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:01.932Z,1528902841.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:01.950Z,1528902841.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:02.326Z,1528902842.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:02.357Z,1528902842.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:02.734Z,1528902842.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:02.760Z,1528902842.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:03.112Z,1528902843.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:03.140Z,1528902843.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:03.507Z,1528902843.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:03.539Z,1528902843.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:03.929Z,1528902843.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:03.947Z,1528902843.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:04.331Z,1528902844.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:04.349Z,1528902844.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:04.728Z,1528902844.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:04.746Z,1528902844.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:05.112Z,1528902845.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:05.139Z,1528902845.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:05.513Z,1528902845.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:05.541Z,1528902845.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:05.927Z,1528902845.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:05.946Z,1528902845.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:06.335Z,1528902846.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:06.353Z,1528902846.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:06.736Z,1528902846.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:06.754Z,1528902846.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:07.110Z,1528902847.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:07.150Z,1528902847.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:07.515Z,1528902847.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:07.549Z,1528902847.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:07.925Z,1528902847.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:07.954Z,1528902847.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:08.325Z,1528902848.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:08.360Z,1528902848.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:08.724Z,1528902848.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:08.759Z,1528902848.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:09.114Z,1528902849.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:09.132Z,1528902849.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:09.515Z,1528902849.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:09.556Z,1528902849.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:09.929Z,1528902849.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:09.962Z,1528902849.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:10.328Z,1528902850.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:10.363Z,1528902850.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:10.726Z,1528902850.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:10.764Z,1528902850.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:11.119Z,1528902851.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:11.137Z,1528902851.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:11.518Z,1528902851.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:11.536Z,1528902851.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:11.927Z,1528902851.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:11.965Z,1528902851.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:12.326Z,1528902852.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:12.344Z,1528902852.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:12.721Z,1528902852.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:12.744Z,1528902852.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:13.119Z,1528902853.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:13.137Z,1528902853.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:13.517Z,1528902853.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:13.542Z,1528902853.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:13.926Z,1528902853.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:13.944Z,1528902853.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:14.333Z,1528902854.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:14.364Z,1528902854.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:14.729Z,1528902854.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:14.763Z,1528902854.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:15.119Z,1528902855.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:15.140Z,1528902855.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:15.520Z,1528902855.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:15.538Z,1528902855.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:15.922Z,1528902855.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:15.940Z,1528902855.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:16.333Z,1528902856.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:16.370Z,1528902856.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:16.724Z,1528902856.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:16.743Z,1528902856.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:17.120Z,1528902857.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:17.138Z,1528902857.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:17.517Z,1528902857.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:17.536Z,1528902857.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:17.925Z,1528902857.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:17.943Z,1528902857.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:18.332Z,1528902858.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:18.369Z,1528902858.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:18.728Z,1528902858.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:18.746Z,1528902858.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:19.120Z,1528902859.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:19.138Z,1528902859.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:19.520Z,1528902859.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:19.538Z,1528902859.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:19.927Z,1528902859.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:19.947Z,1528902859.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:20.328Z,1528902860.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:20.346Z,1528902860.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:20.724Z,1528902860.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:20.742Z,1528902860.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:21.123Z,1528902861.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:21.141Z,1528902861.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:21.516Z,1528902861.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:21.567Z,1528902861.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:21.923Z,1528902861.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:21.943Z,1528902861.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:22.328Z,1528902862.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:22.346Z,1528902862.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:22.723Z,1528902862.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:22.741Z,1528902862.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:23.116Z,1528902863.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:23.162Z,1528902863.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:23.517Z,1528902863.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:23.539Z,1528902863.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:23.924Z,1528902863.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:23.942Z,1528902863.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:24.334Z,1528902864.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:24.367Z,1528902864.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:24.725Z,1528902864.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:24.769Z,1528902864.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:25.119Z,1528902865.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:25.166Z,1528902865.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:25.520Z,1528902865.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:25.539Z,1528902865.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:25.928Z,1528902865.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:25.952Z,1528902865.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:26.326Z,1528902866.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:26.373Z,1528902866.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:26.723Z,1528902866.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:26.775Z,1528902866.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:27.123Z,1528902867.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:27.141Z,1528902867.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:27.522Z,1528902867.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:27.540Z,1528902867.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:27.922Z,1528902867.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:27.970Z,1528902867.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:28.326Z,1528902868.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:28.348Z,1528902868.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:28.724Z,1528902868.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:28.744Z,1528902868.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:29.124Z,1528902869.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:29.144Z,1528902869.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:29.523Z,1528902869.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:29.572Z,1528902869.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:29.929Z,1528902869.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:29.952Z,1528902869.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:30.332Z,1528902870.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:30.372Z,1528902870.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:30.731Z,1528902870.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:30.749Z,1528902870.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:31.122Z,1528902871.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:31.173Z,1528902871.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:31.516Z,1528902871.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:31.538Z,1528902871.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:31.932Z,1528902871.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:31.950Z,1528902871.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:32.329Z,1528902872.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:32.347Z,1528902872.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:32.729Z,1528902872.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:32.771Z,1528902872.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:33.125Z,1528902873.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:33.148Z,1528902873.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:36.227Z,1528902876.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:36.245Z,1528902876.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:36.384Z,1528902876.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:36.402Z,1528902876.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:36.784Z,1528902876.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:36.804Z,1528902876.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:37.174Z,1528902877.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:37.196Z,1528902877.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:37.557Z,1528902877.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:37.595Z,1528902877.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:37.959Z,1528902877.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:38.005Z,1528902878.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:38.358Z,1528902878.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:38.396Z,1528902878.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:38.759Z,1528902878.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:38.787Z,1528902878.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:39.179Z,1528902879.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:39.219Z,1528902879.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:39.576Z,1528902879.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:39.594Z,1528902879.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:39.976Z,1528902879.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:39.994Z,1528902879.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:40.355Z,1528902880.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:40.385Z,1528902880.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:40.756Z,1528902880.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:40.788Z,1528902880.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:41.158Z,1528902881.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:41.192Z,1528902881.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:41.559Z,1528902881.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:41.597Z,1528902881.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:41.975Z,1528902881.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:41.994Z,1528902881.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:42.375Z,1528902882.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:42.410Z,1528902882.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:42.779Z,1528902882.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:42.798Z,1528902882.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:43.155Z,1528902883.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:43.188Z,1528902883.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:43.556Z,1528902883.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:43.582Z,1528902883.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:43.972Z,1528902883.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:44.001Z,1528902884.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:44.371Z,1528902884.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:44.398Z,1528902884.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:44.766Z,1528902884.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:44.800Z,1528902884.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:45.160Z,1528902885.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:45.194Z,1528902885.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:45.556Z,1528902885.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:45.599Z,1528902885.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:45.971Z,1528902885.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:46.004Z,1528902886.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:46.373Z,1528902886.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:46.402Z,1528902886.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:46.773Z,1528902886.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:46.800Z,1528902886.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:47.159Z,1528902887.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:47.210Z,1528902887.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:47.556Z,1528902887.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:47.611Z,1528902887.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:47.967Z,1528902887.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:48.001Z,1528902888.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:48.377Z,1528902888.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:48.402Z,1528902888.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:48.771Z,1528902888.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:48.807Z,1528902888.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:49.159Z,1528902889.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:49.181Z,1528902889.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:49.560Z,1528902889.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:49.578Z,1528902889.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:49.973Z,1528902889.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:50.008Z,1528902890.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:50.370Z,1528902890.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:50.406Z,1528902890.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:50.771Z,1528902890.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:50.807Z,1528902890.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:51.161Z,1528902891.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:51.179Z,1528902891.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:51.560Z,1528902891.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:51.578Z,1528902891.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:51.969Z,1528902891.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:52.011Z,1528902892.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:52.373Z,1528902892.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:52.404Z,1528902892.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:52.772Z,1528902892.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:52.810Z,1528902892.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:53.162Z,1528902893.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:53.180Z,1528902893.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:53.558Z,1528902893.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:53.608Z,1528902893.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:53.966Z,1528902893.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:53.988Z,1528902893.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:54.372Z,1528902894.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:54.415Z,1528902894.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:54.770Z,1528902894.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:54.788Z,1528902894.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:55.161Z,1528902895.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:55.210Z,1528902895.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:55.560Z,1528902895.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:55.583Z,1528902895.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:55.970Z,1528902895.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:55.988Z,1528902895.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:56.370Z,1528902896.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:56.390Z,1528902896.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:56.766Z,1528902896.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:56.807Z,1528902896.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:57.163Z,1528902897.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:57.186Z,1528902897.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:57.555Z,1528902897.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:57.582Z,1528902897.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:57.968Z,1528902897.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:57.986Z,1528902897.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:58.369Z,1528902898.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:58.416Z,1528902898.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:58.766Z,1528902898.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:58.788Z,1528902898.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:59.162Z,1528902899.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:59.186Z,1528902899.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:59.564Z,1528902899.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:14:59.582Z,1528902899.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:14:59.962Z,1528902899.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:00.009Z,1528902900.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:00.369Z,1528902900.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:00.392Z,1528902900.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:00.772Z,1528902900.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:00.792Z,1528902900.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:01.164Z,1528902901.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:01.183Z,1528902901.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:01.559Z,1528902901.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:01.606Z,1528902901.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:01.970Z,1528902901.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:02.005Z,1528902902.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:02.366Z,1528902902.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:02.388Z,1528902902.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:02.769Z,1528902902.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:02.787Z,1528902902.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:03.163Z,1528902903.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:03.213Z,1528902903.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:03.557Z,1528902903.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:03.575Z,1528902903.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:03.966Z,1528902903.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:03.989Z,1528902903.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:04.369Z,1528902904.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:04.388Z,1528902904.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:04.767Z,1528902904.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:04.815Z,1528902904.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:05.159Z,1528902905.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:05.204Z,1528902905.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:05.559Z,1528902905.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:05.592Z,1528902905.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:05.974Z,1528902905.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:05.992Z,1528902905.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:06.370Z,1528902906.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:06.419Z,1528902906.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:06.773Z,1528902906.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:06.817Z,1528902906.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:07.166Z,1528902907.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:07.189Z,1528902907.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:07.562Z,1528902907.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:07.584Z,1528902907.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:07.971Z,1528902907.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:07.990Z,1528902907.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:08.370Z,1528902908.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:08.417Z,1528902908.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:08.770Z,1528902908.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:08.794Z,1528902908.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:09.162Z,1528902909.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:09.190Z,1528902909.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:09.554Z,1528902909.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:09.592Z,1528902909.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:09.961Z,1528902909.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:09.984Z,1528902909.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:10.371Z,1528902910.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:10.395Z,1528902910.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:10.770Z,1528902910.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:10.793Z,1528902910.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:11.170Z,1528902911.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:11.216Z,1528902911.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:11.562Z,1528902911.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:11.596Z,1528902911.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:11.955Z,1528902911.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:11.978Z,1528902911.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:12.362Z,1528902912.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:12.384Z,1528902912.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:12.762Z,1528902912.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:12.780Z,1528902912.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:13.172Z,1528902913.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:13.217Z,1528902913.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:13.570Z,1528902913.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:13.592Z,1528902913.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:13.971Z,1528902913.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:13.994Z,1528902913.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:14.355Z,1528902914.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:14.379Z,1528902914.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:14.759Z,1528902914.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:14.782Z,1528902914.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:15.159Z,1528902915.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:15.184Z,1528902915.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:15.562Z,1528902915.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:15.583Z,1528902915.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:15.965Z,1528902915.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:15.988Z,1528902915.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:16.371Z,1528902916.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:16.396Z,1528902916.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:16.772Z,1528902916.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:16.790Z,1528902916.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:17.171Z,1528902917.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:17.194Z,1528902917.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:17.556Z,1528902917.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:17.590Z,1528902917.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:17.956Z,1528902917.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:17.988Z,1528902917.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:18.356Z,1528902918.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:18.391Z,1528902918.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:18.755Z,1528902918.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:18.801Z,1528902918.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:19.161Z,1528902919.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:19.201Z,1528902919.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:19.570Z,1528902919.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:19.598Z,1528902919.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:19.969Z,1528902919.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:20.005Z,1528902920.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:20.351Z,1528902920.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:20.370Z,1528902920.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:20.759Z,1528902920.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:20.807Z,1528902920.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:21.159Z,1528902921.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:21.178Z,1528902921.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:21.554Z,1528902921.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:21.580Z,1528902921.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:21.958Z,1528902921.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:21.976Z,1528902921.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:22.369Z,1528902922.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:22.389Z,1528902922.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:22.769Z,1528902922.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:22.787Z,1528902922.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:23.170Z,1528902923.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:23.188Z,1528902923.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:23.562Z,1528902923.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:23.584Z,1528902923.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:23.951Z,1528902923.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:23.987Z,1528902923.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:24.362Z,1528902924.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:24.379Z,1528902924.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:24.751Z,1528902924.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:24.789Z,1528902924.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:25.172Z,1528902925.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:25.190Z,1528902925.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:25.575Z,1528902925.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:25.593Z,1528902925.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:25.977Z,1528902925.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:25.995Z,1528902925.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:26.351Z,1528902926.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:26.380Z,1528902926.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:26.755Z,1528902926.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:26.788Z,1528902926.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:27.155Z,1528902927.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:27.190Z,1528902927.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:27.556Z,1528902927.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:27.574Z,1528902927.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:27.959Z,1528902927.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:27.976Z,1528902927.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:28.369Z,1528902928.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:28.413Z,1528902928.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:28.769Z,1528902928.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:28.787Z,1528902928.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:29.173Z,1528902929.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:29.192Z,1528902929.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:29.565Z,1528902929.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:29.583Z,1528902929.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:32.670Z,1528902932.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:32.688Z,1528902932.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:32.824Z,1528902932.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:32.843Z,1528902932.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:33.233Z,1528902933.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:33.272Z,1528902933.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:33.629Z,1528902933.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:33.671Z,1528902933.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:34.026Z,1528902934.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:34.075Z,1528902934.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:34.422Z,1528902934.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:34.449Z,1528902934.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:34.823Z,1528902934.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:34.840Z,1528902934.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:35.220Z,1528902935.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:35.264Z,1528902935.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:35.621Z,1528902935.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:35.644Z,1528902935.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:36.028Z,1528902936.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:36.047Z,1528902936.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:36.431Z,1528902936.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:36.449Z,1528902936.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:36.829Z,1528902936.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:36.875Z,1528902936.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:37.221Z,1528902937.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:37.244Z,1528902937.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:37.621Z,1528902937.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:37.643Z,1528902937.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:38.031Z,1528902938.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:38.050Z,1528902938.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:38.425Z,1528902938.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:38.468Z,1528902938.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:38.825Z,1528902938.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:38.848Z,1528902938.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:39.220Z,1528902939.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:39.248Z,1528902939.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:39.622Z,1528902939.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:39.642Z,1528902939.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:40.026Z,1528902940.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:40.069Z,1528902940.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:40.429Z,1528902940.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:40.452Z,1528902940.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:40.826Z,1528902940.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:40.848Z,1528902940.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:41.218Z,1528902941.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:41.262Z,1528902941.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:41.622Z,1528902941.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:41.671Z,1528902941.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:42.026Z,1528902942.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:42.069Z,1528902942.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:42.429Z,1528902942.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:42.452Z,1528902942.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:42.832Z,1528902942.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:42.850Z,1528902942.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:43.220Z,1528902943.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:43.273Z,1528902943.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:43.621Z,1528902943.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:43.639Z,1528902943.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:44.029Z,1528902944.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:44.052Z,1528902944.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:44.432Z,1528902944.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:44.451Z,1528902944.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:44.827Z,1528902944.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:44.876Z,1528902944.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:45.222Z,1528902945.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:45.240Z,1528902945.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:45.615Z,1528902945.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:45.644Z,1528902945.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:46.019Z,1528902946.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:46.055Z,1528902946.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:46.431Z,1528902946.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:46.449Z,1528902946.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:46.830Z,1528902946.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:46.860Z,1528902946.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:47.231Z,1528902947.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:47.253Z,1528902947.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:47.627Z,1528902947.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:47.649Z,1528902947.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:48.011Z,1528902948.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:48.056Z,1528902948.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:48.419Z,1528902948.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:48.443Z,1528902948.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:48.819Z,1528902948.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:48.851Z,1528902948.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:49.232Z,1528902949.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:49.254Z,1528902949.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:49.635Z,1528902949.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:49.679Z,1528902949.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:50.034Z,1528902950.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:50.064Z,1528902950.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:50.411Z,1528902950.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:50.438Z,1528902950.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:50.825Z,1528902950.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:50.848Z,1528902950.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:51.216Z,1528902951.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:51.253Z,1528902951.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:51.616Z,1528902951.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:51.644Z,1528902951.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:52.015Z,1528902952.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:52.043Z,1528902952.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:52.438Z,1528902952.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:52.459Z,1528902952.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:52.832Z,1528902952.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:52.886Z,1528902952.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:53.232Z,1528902953.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:53.250Z,1528902953.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:53.616Z,1528902953.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:53.657Z,1528902953.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:54.015Z,1528902954.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:54.054Z,1528902954.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:54.416Z,1528902954.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:54.456Z,1528902954.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:54.815Z,1528902954.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:54.852Z,1528902954.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:55.225Z,1528902955.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:55.268Z,1528902955.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:55.629Z,1528902955.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:55.659Z,1528902955.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:56.029Z,1528902956.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:56.057Z,1528902956.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:56.420Z,1528902956.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:56.454Z,1528902956.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:56.819Z,1528902956.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:56.837Z,1528902956.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:57.219Z,1528902957.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:57.237Z,1528902957.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:57.618Z,1528902957.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:57.635Z,1528902957.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:58.022Z,1528902958.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:58.040Z,1528902958.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:58.430Z,1528902958.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:58.448Z,1528902958.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:58.825Z,1528902958.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:58.843Z,1528902958.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:59.226Z,1528902959.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:59.243Z,1528902959.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:15:59.623Z,1528902959.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:15:59.658Z,1528902959.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:00.012Z,1528902960.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:00.030Z,1528902960.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:00.416Z,1528902960.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:00.434Z,1528902960.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:00.820Z,1528902960.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:00.838Z,1528902960.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:01.225Z,1528902961.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:01.243Z,1528902961.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:01.629Z,1528902961.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:01.647Z,1528902961.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:02.026Z,1528902962.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:02.044Z,1528902962.044 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:02.044Z,1528902962.044 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 236
2018-06-13T15:16:02.044Z,1528902962.044 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:16:02.046Z,1528902962.046 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:02.046Z,1528902962.046 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 236
2018-06-13T15:16:02.046Z,1528902962.046 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:16:02.048Z,1528902962.048 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:02.048Z,1528902962.048 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 236
2018-06-13T15:16:02.048Z,1528902962.048 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:16:02.141Z,1528902962.141 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:16:02.141Z,1528902962.141 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:16:02.141Z,1528902962.141 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:16:02.418Z,1528902962.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:02.525Z,1528902962.525 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:16:02.525Z,1528902962.525 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 236
2018-06-13T15:16:02.526Z,1528902962.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:16:02.526Z,1528902962.526 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 236
2018-06-13T15:16:02.526Z,1528902962.526 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:16:02.526Z,1528902962.526 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 236
2018-06-13T15:16:02.819Z,1528902962.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:02.847Z,1528902962.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:16:02.848Z,1528902962.848 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:16:02.848Z,1528902962.848 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:16:02.848Z,1528902962.848 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:16:02.853Z,1528902962.853 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:16:02.853Z,1528902962.853 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:16:02.854Z,1528902962.854 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:16:02.854Z,1528902962.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:16:02.854Z,1528902962.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:16:03.211Z,1528902963.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:03.254Z,1528902963.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:16:03.255Z,1528902963.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:03.612Z,1528902963.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:03.644Z,1528902963.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:16:03.645Z,1528902963.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:04.015Z,1528902964.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:04.043Z,1528902964.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:16:04.044Z,1528902964.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:04.424Z,1528902964.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:04.463Z,1528902964.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:16:04.464Z,1528902964.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:04.832Z,1528902964.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:04.856Z,1528902964.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:16:04.857Z,1528902964.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:05.233Z,1528902965.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:05.273Z,1528902965.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:16:05.274Z,1528902965.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:05.618Z,1528902965.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:05.639Z,1528902965.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:16:05.640Z,1528902965.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:06.018Z,1528902966.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:06.035Z,1528902966.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:16:06.036Z,1528902966.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:06.419Z,1528902966.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:06.450Z,1528902966.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:16:06.451Z,1528902966.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:06.822Z,1528902966.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:06.839Z,1528902966.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:16:06.840Z,1528902966.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:07.230Z,1528902967.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:07.247Z,1528902967.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:16:07.248Z,1528902967.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:07.634Z,1528902967.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:07.651Z,1528902967.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:16:07.652Z,1528902967.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:08.033Z,1528902968.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:08.050Z,1528902968.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:16:08.051Z,1528902968.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:08.411Z,1528902968.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:08.438Z,1528902968.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:16:08.439Z,1528902968.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:08.815Z,1528902968.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:08.842Z,1528902968.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:16:08.843Z,1528902968.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:09.215Z,1528902969.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:09.243Z,1528902969.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:16:09.244Z,1528902969.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:09.612Z,1528902969.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:09.647Z,1528902969.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:16:09.647Z,1528902969.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:10.015Z,1528902970.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:10.051Z,1528902970.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:16:10.052Z,1528902970.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:10.432Z,1528902970.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:10.449Z,1528902970.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:16:10.450Z,1528902970.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:10.835Z,1528902970.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:10.852Z,1528902970.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:16:10.853Z,1528902970.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:11.232Z,1528902971.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:11.249Z,1528902971.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:16:11.250Z,1528902971.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:11.615Z,1528902971.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:11.635Z,1528902971.635 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T15:16:11.635Z,1528902971.635 [BPC1] Communications Fault, FailCount= 3
2018-06-13T15:16:11.635Z,1528902971.635 [BPC1](ERROR): Communications Fault
2018-06-13T15:16:11.644Z,1528902971.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:16:11.645Z,1528902971.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:11.729Z,1528902971.729 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T15:16:12.015Z,1528902972.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:12.051Z,1528902972.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:16:12.052Z,1528902972.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:12.416Z,1528902972.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:12.456Z,1528902972.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:16:12.457Z,1528902972.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:12.812Z,1528902972.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:12.850Z,1528902972.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:16:12.851Z,1528902972.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:12.930Z,1528902972.930 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T15:16:12.930Z,1528902972.930 [BPC1] No Fault, FailCount= 3
2018-06-13T15:16:13.222Z,1528902973.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:13.304Z,1528902973.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T15:16:13.305Z,1528902973.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:13.635Z,1528902973.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:13.652Z,1528902973.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T15:16:13.653Z,1528902973.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:14.035Z,1528902974.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:14.055Z,1528902974.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T15:16:14.056Z,1528902974.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:14.411Z,1528902974.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:14.450Z,1528902974.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T15:16:14.451Z,1528902974.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:14.815Z,1528902974.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:14.853Z,1528902974.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T15:16:14.854Z,1528902974.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:15.211Z,1528902975.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:15.228Z,1528902975.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T15:16:15.241Z,1528902975.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:15.616Z,1528902975.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:15.654Z,1528902975.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T15:16:15.655Z,1528902975.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:16.015Z,1528902976.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:16.032Z,1528902976.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T15:16:16.049Z,1528902976.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:16.429Z,1528902976.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:16.463Z,1528902976.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T15:16:16.464Z,1528902976.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:16.829Z,1528902976.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:16.857Z,1528902976.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T15:16:16.858Z,1528902976.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:17.225Z,1528902977.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:17.259Z,1528902977.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T15:16:17.260Z,1528902977.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:17.616Z,1528902977.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:17.633Z,1528902977.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:16:17.633Z,1528902977.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:18.019Z,1528902978.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:18.036Z,1528902978.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:16:18.037Z,1528902978.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:18.411Z,1528902978.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:18.447Z,1528902978.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T15:16:18.448Z,1528902978.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:18.815Z,1528902978.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:18.848Z,1528902978.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T15:16:18.849Z,1528902978.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:19.232Z,1528902979.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:19.249Z,1528902979.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:16:19.250Z,1528902979.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:19.634Z,1528902979.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:19.663Z,1528902979.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:16:19.664Z,1528902979.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:20.030Z,1528902980.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:20.047Z,1528902980.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:16:20.048Z,1528902980.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:20.415Z,1528902980.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:20.441Z,1528902980.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T15:16:20.442Z,1528902980.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:20.811Z,1528902980.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:20.846Z,1528902980.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T15:16:20.847Z,1528902980.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:21.215Z,1528902981.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:21.243Z,1528902981.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T15:16:21.244Z,1528902981.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:21.616Z,1528902981.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:21.653Z,1528902981.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T15:16:21.654Z,1528902981.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:22.015Z,1528902982.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:22.051Z,1528902982.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:22.436Z,1528902982.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:22.453Z,1528902982.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:22.829Z,1528902982.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:22.852Z,1528902982.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:23.230Z,1528902983.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:23.264Z,1528902983.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:23.615Z,1528902983.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:23.648Z,1528902983.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:24.015Z,1528902984.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:24.048Z,1528902984.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:24.417Z,1528902984.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:24.445Z,1528902984.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:24.815Z,1528902984.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:24.848Z,1528902984.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:25.232Z,1528902985.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:25.250Z,1528902985.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:25.635Z,1528902985.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:25.652Z,1528902985.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:26.034Z,1528902986.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:26.071Z,1528902986.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:26.415Z,1528902986.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:26.448Z,1528902986.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:26.815Z,1528902986.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:26.852Z,1528902986.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:27.219Z,1528902987.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:27.248Z,1528902987.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:27.616Z,1528902987.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:27.647Z,1528902987.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:28.015Z,1528902988.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:28.051Z,1528902988.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:28.436Z,1528902988.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:28.455Z,1528902988.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:28.835Z,1528902988.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:28.852Z,1528902988.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:29.243Z,1528902989.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:29.262Z,1528902989.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:29.619Z,1528902989.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:29.648Z,1528902989.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:30.019Z,1528902990.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:30.046Z,1528902990.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:30.416Z,1528902990.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:30.451Z,1528902990.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:30.819Z,1528902990.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:30.847Z,1528902990.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:31.237Z,1528902991.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:31.255Z,1528902991.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:31.636Z,1528902991.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:31.653Z,1528902991.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:32.041Z,1528902992.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:32.059Z,1528902992.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:32.420Z,1528902992.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:32.448Z,1528902992.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:32.819Z,1528902992.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:32.847Z,1528902992.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:33.220Z,1528902993.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:33.250Z,1528902993.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:36.342Z,1528902996.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:36.360Z,1528902996.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:36.475Z,1528902996.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:36.542Z,1528902996.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:36.895Z,1528902996.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:36.913Z,1528902996.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:37.296Z,1528902997.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:37.319Z,1528902997.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:37.688Z,1528902997.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:37.706Z,1528902997.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:38.071Z,1528902998.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:38.101Z,1528902998.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:38.472Z,1528902998.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:38.500Z,1528902998.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:38.871Z,1528902998.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:38.898Z,1528902998.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:39.292Z,1528902999.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:39.311Z,1528902999.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:39.691Z,1528902999.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:39.710Z,1528902999.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:40.092Z,1528903000.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:40.112Z,1528903000.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:40.467Z,1528903000.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:40.500Z,1528903000.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:40.871Z,1528903000.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:40.898Z,1528903000.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:41.271Z,1528903001.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:41.304Z,1528903001.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:41.672Z,1528903001.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:41.700Z,1528903001.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:42.072Z,1528903002.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:42.099Z,1528903002.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:42.488Z,1528903002.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:42.506Z,1528903002.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:42.888Z,1528903002.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:42.912Z,1528903002.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:43.289Z,1528903003.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:43.306Z,1528903003.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:43.671Z,1528903003.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:43.698Z,1528903003.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:44.075Z,1528903004.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:44.112Z,1528903004.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:44.472Z,1528903004.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:44.500Z,1528903004.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:44.875Z,1528903004.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:44.903Z,1528903004.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:45.293Z,1528903005.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:45.311Z,1528903005.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:45.684Z,1528903005.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:45.718Z,1528903005.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:46.088Z,1528903006.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:46.106Z,1528903006.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:46.471Z,1528903006.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:46.505Z,1528903006.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:46.868Z,1528903006.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:46.911Z,1528903006.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:47.271Z,1528903007.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:47.304Z,1528903007.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:47.672Z,1528903007.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:47.715Z,1528903007.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:48.067Z,1528903008.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:48.084Z,1528903008.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:48.481Z,1528903008.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:48.516Z,1528903008.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:48.886Z,1528903008.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:48.916Z,1528903008.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:49.277Z,1528903009.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:49.312Z,1528903009.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:49.670Z,1528903009.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:49.688Z,1528903009.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:50.075Z,1528903010.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:50.093Z,1528903010.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:50.474Z,1528903010.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:50.492Z,1528903010.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:50.874Z,1528903010.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:50.891Z,1528903010.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:51.285Z,1528903011.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:51.319Z,1528903011.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:51.685Z,1528903011.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:51.703Z,1528903011.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:52.082Z,1528903012.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:52.099Z,1528903012.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:52.478Z,1528903012.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:52.496Z,1528903012.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:52.871Z,1528903012.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:52.893Z,1528903012.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:53.277Z,1528903013.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:53.295Z,1528903013.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:53.678Z,1528903013.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:53.696Z,1528903013.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:54.077Z,1528903014.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:54.094Z,1528903014.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:54.481Z,1528903014.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:54.499Z,1528903014.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:54.885Z,1528903014.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:54.903Z,1528903014.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:55.282Z,1528903015.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:55.300Z,1528903015.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:55.675Z,1528903015.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:55.698Z,1528903015.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:56.078Z,1528903016.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:56.096Z,1528903016.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:56.475Z,1528903016.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:56.492Z,1528903016.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:56.876Z,1528903016.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:56.894Z,1528903016.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:57.285Z,1528903017.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:57.303Z,1528903017.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:57.682Z,1528903017.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:57.704Z,1528903017.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:58.082Z,1528903018.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:58.104Z,1528903018.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:58.478Z,1528903018.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:58.496Z,1528903018.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:58.877Z,1528903018.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:58.894Z,1528903018.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:59.277Z,1528903019.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:59.295Z,1528903019.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:16:59.678Z,1528903019.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:16:59.696Z,1528903019.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:00.071Z,1528903020.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:00.094Z,1528903020.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:00.486Z,1528903020.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:00.505Z,1528903020.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:00.887Z,1528903020.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:00.905Z,1528903020.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:01.287Z,1528903021.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:01.312Z,1528903021.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:01.675Z,1528903021.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:01.697Z,1528903021.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:02.078Z,1528903022.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:02.095Z,1528903022.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:02.471Z,1528903022.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:02.494Z,1528903022.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:02.876Z,1528903022.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:02.903Z,1528903022.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:03.288Z,1528903023.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:03.306Z,1528903023.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:03.686Z,1528903023.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:03.708Z,1528903023.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:04.086Z,1528903024.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:04.104Z,1528903024.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:04.478Z,1528903024.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:04.495Z,1528903024.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:04.871Z,1528903024.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:04.894Z,1528903024.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:05.275Z,1528903025.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:05.298Z,1528903025.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:05.675Z,1528903025.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:05.714Z,1528903025.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:06.074Z,1528903026.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:06.092Z,1528903026.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:06.482Z,1528903026.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:06.504Z,1528903026.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:06.891Z,1528903026.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:06.909Z,1528903026.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:07.283Z,1528903027.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:07.301Z,1528903027.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:07.675Z,1528903027.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:07.698Z,1528903027.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:08.079Z,1528903028.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:08.096Z,1528903028.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:08.468Z,1528903028.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:08.500Z,1528903028.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:08.874Z,1528903028.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:08.898Z,1528903028.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:09.291Z,1528903029.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:09.316Z,1528903029.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:09.687Z,1528903029.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:09.705Z,1528903029.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:10.088Z,1528903030.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:10.106Z,1528903030.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:10.471Z,1528903030.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:10.510Z,1528903030.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:10.871Z,1528903030.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:10.898Z,1528903030.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:11.271Z,1528903031.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:11.298Z,1528903031.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:11.672Z,1528903031.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:11.708Z,1528903031.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:12.067Z,1528903032.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:12.099Z,1528903032.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:12.488Z,1528903032.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:12.512Z,1528903032.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:12.896Z,1528903032.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:12.914Z,1528903032.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:13.292Z,1528903033.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:13.311Z,1528903033.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:13.671Z,1528903033.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:13.735Z,1528903033.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:14.071Z,1528903034.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:14.100Z,1528903034.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:14.468Z,1528903034.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:14.498Z,1528903034.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:14.871Z,1528903034.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:14.902Z,1528903034.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:15.293Z,1528903035.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:15.316Z,1528903035.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:15.693Z,1528903035.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:15.711Z,1528903035.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:16.088Z,1528903036.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:16.106Z,1528903036.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:16.471Z,1528903036.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:16.506Z,1528903036.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:16.871Z,1528903036.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:16.905Z,1528903036.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:17.271Z,1528903037.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:17.304Z,1528903037.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:17.673Z,1528903037.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:17.703Z,1528903037.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:18.071Z,1528903038.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:18.109Z,1528903038.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:18.488Z,1528903038.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:18.506Z,1528903038.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:18.892Z,1528903038.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:18.910Z,1528903038.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:19.277Z,1528903039.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:19.314Z,1528903039.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:19.671Z,1528903039.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:19.733Z,1528903039.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:20.071Z,1528903040.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:20.106Z,1528903040.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:20.472Z,1528903040.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:20.502Z,1528903040.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:20.871Z,1528903040.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:20.888Z,1528903040.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:21.285Z,1528903041.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:21.313Z,1528903041.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:21.685Z,1528903041.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:21.711Z,1528903041.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:22.081Z,1528903042.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:22.116Z,1528903042.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:22.473Z,1528903042.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:22.512Z,1528903042.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:22.875Z,1528903042.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:22.893Z,1528903042.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:23.276Z,1528903043.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:23.294Z,1528903043.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:23.675Z,1528903043.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:23.694Z,1528903043.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:24.071Z,1528903044.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:24.089Z,1528903044.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:24.486Z,1528903044.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:24.520Z,1528903044.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:24.886Z,1528903044.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:24.928Z,1528903044.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:25.283Z,1528903045.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:25.300Z,1528903045.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:25.674Z,1528903045.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:25.699Z,1528903045.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:26.078Z,1528903046.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:26.134Z,1528903046.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:26.478Z,1528903046.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:26.496Z,1528903046.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:26.877Z,1528903046.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:26.895Z,1528903046.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:27.287Z,1528903047.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:27.306Z,1528903047.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:27.686Z,1528903047.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:27.705Z,1528903047.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:28.086Z,1528903048.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:28.105Z,1528903048.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:28.478Z,1528903048.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:28.496Z,1528903048.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:28.877Z,1528903048.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:28.895Z,1528903048.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:28.898Z,1528903048.898 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T15:17:28.898Z,1528903048.898 [Default:CheckIn:C.Wait] Stopped
2018-06-13T15:17:28.898Z,1528903048.898 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T15:17:28.898Z,1528903048.898 [Default:CheckIn:D] Running Loop=1
2018-06-13T15:17:29.277Z,1528903049.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:29.295Z,1528903049.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:29.298Z,1528903049.298 [Default:CheckIn:D] Stopped
2018-06-13T15:17:29.298Z,1528903049.298 [Default:CheckIn:E] Running Loop=1
2018-06-13T15:17:29.678Z,1528903049.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:29.697Z,1528903049.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:29.700Z,1528903049.700 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 710.264193 min 
2018-06-13T15:17:29.700Z,1528903049.700 [Default:CheckIn:E] Stopped
2018-06-13T15:17:29.700Z,1528903049.700 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T15:17:29.701Z,1528903049.701 [Default:CheckIn] Stopped
2018-06-13T15:17:29.701Z,1528903049.701 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T15:17:29.701Z,1528903049.701 [Default:CheckIn](INFO): Running loop #69
2018-06-13T15:17:29.701Z,1528903049.701 [Default:CheckIn] Running Loop=69
2018-06-13T15:17:29.701Z,1528903049.701 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T15:17:29.701Z,1528903049.701 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T15:17:30.071Z,1528903050.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:30.109Z,1528903050.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:30.492Z,1528903050.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:30.510Z,1528903050.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:30.895Z,1528903050.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:30.912Z,1528903050.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:31.281Z,1528903051.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:31.310Z,1528903051.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:31.671Z,1528903051.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:31.709Z,1528903051.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:32.072Z,1528903052.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:32.106Z,1528903052.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:32.472Z,1528903052.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:32.512Z,1528903052.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:35.614Z,1528903055.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:35.661Z,1528903055.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:35.789Z,1528903055.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:35.832Z,1528903055.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:36.189Z,1528903056.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:36.224Z,1528903056.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:36.590Z,1528903056.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:36.632Z,1528903056.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:36.976Z,1528903056.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:37.038Z,1528903057.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:37.378Z,1528903057.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:37.436Z,1528903057.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:37.774Z,1528903057.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:37.791Z,1528903057.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:38.175Z,1528903058.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:38.198Z,1528903058.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:38.582Z,1528903058.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:38.604Z,1528903058.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:38.985Z,1528903058.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:39.003Z,1528903059.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:39.386Z,1528903059.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:39.405Z,1528903059.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:39.777Z,1528903059.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:39.794Z,1528903059.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:40.174Z,1528903060.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:40.191Z,1528903060.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:40.578Z,1528903060.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:40.596Z,1528903060.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:40.967Z,1528903060.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:41.004Z,1528903061.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:41.388Z,1528903061.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:41.421Z,1528903061.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:41.791Z,1528903061.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:41.809Z,1528903061.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:42.188Z,1528903062.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:42.206Z,1528903062.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:42.567Z,1528903062.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:42.605Z,1528903062.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:42.971Z,1528903062.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:42.999Z,1528903062.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:43.371Z,1528903063.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:43.399Z,1528903063.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:43.767Z,1528903063.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:43.809Z,1528903063.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:44.172Z,1528903064.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:44.250Z,1528903064.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:44.587Z,1528903064.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:44.606Z,1528903064.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:44.988Z,1528903064.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:45.012Z,1528903065.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:45.392Z,1528903065.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:45.410Z,1528903065.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:45.771Z,1528903065.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:45.808Z,1528903065.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:46.167Z,1528903066.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:46.198Z,1528903066.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:46.572Z,1528903066.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:46.613Z,1528903066.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:46.971Z,1528903066.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:46.988Z,1528903066.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:47.385Z,1528903067.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:47.422Z,1528903067.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:47.785Z,1528903067.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:47.832Z,1528903067.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:48.181Z,1528903068.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:48.216Z,1528903068.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:48.571Z,1528903068.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:48.588Z,1528903068.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:48.975Z,1528903068.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:49.016Z,1528903069.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:49.374Z,1528903069.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:49.392Z,1528903069.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:49.774Z,1528903069.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:49.796Z,1528903069.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:50.174Z,1528903070.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:50.192Z,1528903070.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:50.582Z,1528903070.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:50.600Z,1528903070.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:50.981Z,1528903070.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:50.999Z,1528903070.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:51.382Z,1528903071.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:51.400Z,1528903071.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:51.776Z,1528903071.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:51.794Z,1528903071.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:52.173Z,1528903072.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:52.191Z,1528903072.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:52.577Z,1528903072.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:52.595Z,1528903072.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:52.975Z,1528903072.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:53.006Z,1528903073.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:53.386Z,1528903073.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:53.412Z,1528903073.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:53.786Z,1528903073.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:53.805Z,1528903073.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:54.186Z,1528903074.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:54.205Z,1528903074.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:54.573Z,1528903074.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:54.596Z,1528903074.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:54.977Z,1528903074.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:54.995Z,1528903074.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:55.377Z,1528903075.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:55.395Z,1528903075.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:55.772Z,1528903075.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:55.800Z,1528903075.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:56.177Z,1528903076.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:56.195Z,1528903076.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:56.586Z,1528903076.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:56.605Z,1528903076.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:56.986Z,1528903076.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:57.004Z,1528903077.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:57.386Z,1528903077.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:57.405Z,1528903077.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:57.775Z,1528903077.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:57.812Z,1528903077.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:58.178Z,1528903078.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:58.195Z,1528903078.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:58.571Z,1528903078.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:58.595Z,1528903078.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:58.975Z,1528903078.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:58.998Z,1528903078.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:59.387Z,1528903079.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:59.405Z,1528903079.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:17:59.786Z,1528903079.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:17:59.806Z,1528903079.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:00.184Z,1528903080.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:00.209Z,1528903080.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:00.575Z,1528903080.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:00.612Z,1528903080.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:00.977Z,1528903080.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:00.995Z,1528903080.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:01.377Z,1528903081.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:01.399Z,1528903081.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:01.773Z,1528903081.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:01.796Z,1528903081.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:02.175Z,1528903082.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:02.199Z,1528903082.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:02.588Z,1528903082.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:02.606Z,1528903082.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:02.987Z,1528903082.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:03.005Z,1528903083.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:03.387Z,1528903083.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:03.406Z,1528903083.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:03.777Z,1528903083.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:03.795Z,1528903083.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:04.173Z,1528903084.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:04.196Z,1528903084.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:04.576Z,1528903084.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:04.601Z,1528903084.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:04.976Z,1528903084.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:04.995Z,1528903084.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:05.387Z,1528903085.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:05.406Z,1528903085.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:05.790Z,1528903085.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:05.816Z,1528903085.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:06.187Z,1528903086.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:06.206Z,1528903086.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:06.567Z,1528903086.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:06.595Z,1528903086.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:06.977Z,1528903086.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:06.995Z,1528903086.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:07.375Z,1528903087.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:07.406Z,1528903087.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:07.767Z,1528903087.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:07.806Z,1528903087.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:08.171Z,1528903088.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:08.200Z,1528903088.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:08.588Z,1528903088.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:08.612Z,1528903088.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:08.992Z,1528903088.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:09.011Z,1528903089.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:09.393Z,1528903089.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:09.416Z,1528903089.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:09.775Z,1528903089.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:09.812Z,1528903089.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:10.172Z,1528903090.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:10.212Z,1528903090.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:10.568Z,1528903090.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:10.606Z,1528903090.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:10.971Z,1528903090.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:11.009Z,1528903091.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:11.385Z,1528903091.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:11.418Z,1528903091.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:11.782Z,1528903091.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:11.811Z,1528903091.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:12.186Z,1528903092.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:12.220Z,1528903092.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:12.567Z,1528903092.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:12.585Z,1528903092.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:12.967Z,1528903092.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:12.992Z,1528903092.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:13.375Z,1528903093.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:13.428Z,1528903093.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:13.775Z,1528903093.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:13.794Z,1528903093.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:14.172Z,1528903094.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:14.189Z,1528903094.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:14.585Z,1528903094.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:14.619Z,1528903094.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:14.985Z,1528903094.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:15.022Z,1528903095.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:15.381Z,1528903095.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:15.419Z,1528903095.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:15.774Z,1528903095.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:15.792Z,1528903095.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:16.170Z,1528903096.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:16.192Z,1528903096.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:16.574Z,1528903096.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:16.592Z,1528903096.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:16.975Z,1528903096.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:16.992Z,1528903096.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:17.385Z,1528903097.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:17.427Z,1528903097.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:17.781Z,1528903097.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:17.800Z,1528903097.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:18.185Z,1528903098.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:18.204Z,1528903098.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:18.576Z,1528903098.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:18.594Z,1528903098.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:18.972Z,1528903098.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:19.006Z,1528903099.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:19.375Z,1528903099.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:19.411Z,1528903099.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:19.774Z,1528903099.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:19.800Z,1528903099.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:20.171Z,1528903100.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:20.194Z,1528903100.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:20.582Z,1528903100.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:20.605Z,1528903100.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:20.985Z,1528903100.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:21.004Z,1528903101.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:21.382Z,1528903101.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:21.404Z,1528903101.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:21.780Z,1528903101.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:21.799Z,1528903101.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:22.173Z,1528903102.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:22.191Z,1528903102.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:22.571Z,1528903102.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:22.594Z,1528903102.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:22.975Z,1528903102.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:22.998Z,1528903102.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:23.385Z,1528903103.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:23.403Z,1528903103.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:23.785Z,1528903103.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:23.804Z,1528903103.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:24.182Z,1528903104.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:24.205Z,1528903104.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:24.574Z,1528903104.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:24.591Z,1528903104.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:24.977Z,1528903104.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:24.995Z,1528903104.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:25.375Z,1528903105.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:25.398Z,1528903105.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:25.779Z,1528903105.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:25.804Z,1528903105.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:26.177Z,1528903106.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:26.212Z,1528903106.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:26.587Z,1528903106.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:26.605Z,1528903106.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:26.986Z,1528903106.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:27.004Z,1528903107.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:27.386Z,1528903107.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:27.404Z,1528903107.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:27.777Z,1528903107.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:27.794Z,1528903107.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:28.178Z,1528903108.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:28.195Z,1528903108.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:28.572Z,1528903108.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:28.599Z,1528903108.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:28.977Z,1528903108.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:28.995Z,1528903108.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:29.386Z,1528903109.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:29.405Z,1528903109.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:29.786Z,1528903109.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:29.805Z,1528903109.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:32.909Z,1528903112.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:32.937Z,1528903112.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:33.052Z,1528903113.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:33.096Z,1528903113.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:33.459Z,1528903113.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:33.486Z,1528903113.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:33.861Z,1528903113.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:33.904Z,1528903113.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:34.255Z,1528903114.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:34.290Z,1528903114.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:34.672Z,1528903114.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:34.696Z,1528903114.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:35.076Z,1528903115.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:35.095Z,1528903115.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:35.471Z,1528903115.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:35.489Z,1528903115.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:35.855Z,1528903115.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:35.896Z,1528903115.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:36.255Z,1528903116.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:36.290Z,1528903116.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:36.656Z,1528903116.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:36.689Z,1528903116.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:37.055Z,1528903117.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:37.095Z,1528903117.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:37.469Z,1528903117.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:37.514Z,1528903117.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:37.865Z,1528903117.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:37.893Z,1528903117.893 [BPC1](ERROR): Failed to parse Bank A battery data
2018-06-13T15:18:37.906Z,1528903117.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:38.270Z,1528903118.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:38.303Z,1528903118.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:38.656Z,1528903118.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:38.674Z,1528903118.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:39.058Z,1528903119.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:39.076Z,1528903119.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:39.458Z,1528903119.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:39.484Z,1528903119.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:39.859Z,1528903119.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:39.877Z,1528903119.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:40.260Z,1528903120.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:40.278Z,1528903120.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:40.666Z,1528903120.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:40.684Z,1528903120.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:41.069Z,1528903121.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:41.087Z,1528903121.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:41.467Z,1528903121.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:41.484Z,1528903121.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:41.859Z,1528903121.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:41.887Z,1528903121.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:42.262Z,1528903122.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:42.280Z,1528903122.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:42.655Z,1528903122.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:42.680Z,1528903122.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:43.059Z,1528903123.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:43.082Z,1528903123.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:43.474Z,1528903123.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:43.492Z,1528903123.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:43.870Z,1528903123.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:43.887Z,1528903123.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:44.266Z,1528903124.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:44.284Z,1528903124.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:44.662Z,1528903124.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:44.680Z,1528903124.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:45.055Z,1528903125.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:45.078Z,1528903125.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:45.461Z,1528903125.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:45.479Z,1528903125.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:45.859Z,1528903125.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:45.884Z,1528903125.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:46.261Z,1528903126.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:46.279Z,1528903126.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:46.670Z,1528903126.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:46.688Z,1528903126.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:47.071Z,1528903127.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:47.089Z,1528903127.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:47.468Z,1528903127.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:47.487Z,1528903127.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:47.865Z,1528903127.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:47.888Z,1528903127.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:48.266Z,1528903128.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:48.292Z,1528903128.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:48.666Z,1528903128.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:48.684Z,1528903128.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:49.059Z,1528903129.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:49.089Z,1528903129.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:49.476Z,1528903129.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:49.494Z,1528903129.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:49.875Z,1528903129.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:49.893Z,1528903129.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:50.271Z,1528903130.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:50.305Z,1528903130.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:50.656Z,1528903130.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:50.697Z,1528903130.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:51.051Z,1528903131.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:51.096Z,1528903131.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:51.455Z,1528903131.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:51.489Z,1528903131.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:51.856Z,1528903131.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:51.891Z,1528903131.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:52.255Z,1528903132.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:52.293Z,1528903132.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:52.669Z,1528903132.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:52.703Z,1528903132.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:53.073Z,1528903133.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:53.108Z,1528903133.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:53.465Z,1528903133.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:53.504Z,1528903133.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:53.859Z,1528903133.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:53.904Z,1528903133.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:54.259Z,1528903134.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:54.277Z,1528903134.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:54.656Z,1528903134.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:54.684Z,1528903134.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:55.062Z,1528903135.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:55.080Z,1528903135.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:55.469Z,1528903135.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:55.487Z,1528903135.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:55.869Z,1528903135.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:55.887Z,1528903135.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:56.268Z,1528903136.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:56.294Z,1528903136.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:56.662Z,1528903136.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:56.680Z,1528903136.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:57.055Z,1528903137.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:57.079Z,1528903137.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:57.465Z,1528903137.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:57.483Z,1528903137.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:57.860Z,1528903137.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:57.888Z,1528903137.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:58.262Z,1528903138.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:58.280Z,1528903138.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:58.668Z,1528903138.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:58.686Z,1528903138.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:59.070Z,1528903139.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:59.088Z,1528903139.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:59.467Z,1528903139.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:59.492Z,1528903139.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:18:59.860Z,1528903139.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:18:59.887Z,1528903139.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:00.262Z,1528903140.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:00.281Z,1528903140.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:00.662Z,1528903140.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:00.680Z,1528903140.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:01.059Z,1528903141.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:01.086Z,1528903141.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:01.474Z,1528903141.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:01.494Z,1528903141.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:01.876Z,1528903141.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:01.900Z,1528903141.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:02.271Z,1528903142.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:02.290Z,1528903142.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:02.655Z,1528903142.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:02.684Z,1528903142.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:03.051Z,1528903143.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:03.087Z,1528903143.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:03.087Z,1528903143.087 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 237
2018-06-13T15:19:03.087Z,1528903143.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:19:03.089Z,1528903143.089 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:03.090Z,1528903143.090 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 237
2018-06-13T15:19:03.090Z,1528903143.090 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:19:03.091Z,1528903143.091 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:03.091Z,1528903143.091 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 237
2018-06-13T15:19:03.091Z,1528903143.091 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:19:03.173Z,1528903143.173 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:19:03.173Z,1528903143.173 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:19:03.174Z,1528903143.174 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:19:03.462Z,1528903143.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:03.593Z,1528903143.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:19:03.594Z,1528903143.594 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 237
2018-06-13T15:19:03.594Z,1528903143.594 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:19:03.594Z,1528903143.594 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 237
2018-06-13T15:19:03.595Z,1528903143.595 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:19:03.595Z,1528903143.595 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 237
2018-06-13T15:19:03.855Z,1528903143.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:03.910Z,1528903143.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:19:03.911Z,1528903143.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:19:03.911Z,1528903143.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:19:03.911Z,1528903143.911 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:19:03.912Z,1528903143.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:19:03.912Z,1528903143.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:19:03.912Z,1528903143.912 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:19:03.913Z,1528903143.913 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:19:03.913Z,1528903143.913 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:19:04.262Z,1528903144.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:04.280Z,1528903144.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:19:04.297Z,1528903144.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:04.669Z,1528903144.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:04.707Z,1528903144.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:19:04.708Z,1528903144.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:05.069Z,1528903145.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:05.114Z,1528903145.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:19:05.114Z,1528903145.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:05.469Z,1528903145.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:05.487Z,1528903145.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:19:05.488Z,1528903145.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:05.860Z,1528903145.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:05.878Z,1528903145.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:19:05.879Z,1528903145.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:06.260Z,1528903146.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:06.277Z,1528903146.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:19:06.278Z,1528903146.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:06.662Z,1528903146.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:06.679Z,1528903146.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:19:06.680Z,1528903146.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:07.060Z,1528903147.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:07.078Z,1528903147.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:19:07.079Z,1528903147.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:07.469Z,1528903147.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:07.486Z,1528903147.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:19:07.487Z,1528903147.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:07.866Z,1528903147.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:07.888Z,1528903147.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:19:07.889Z,1528903147.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:08.271Z,1528903148.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:08.289Z,1528903148.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:19:08.290Z,1528903148.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:08.662Z,1528903148.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:08.680Z,1528903148.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:19:08.681Z,1528903148.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:09.059Z,1528903149.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:09.082Z,1528903149.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:19:09.083Z,1528903149.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:09.463Z,1528903149.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:09.480Z,1528903149.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:19:09.481Z,1528903149.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:09.862Z,1528903149.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:09.879Z,1528903149.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:19:09.880Z,1528903149.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:10.261Z,1528903150.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:10.279Z,1528903150.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:19:10.279Z,1528903150.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:10.670Z,1528903150.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:10.688Z,1528903150.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:19:10.688Z,1528903150.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:11.071Z,1528903151.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:11.088Z,1528903151.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:19:11.089Z,1528903151.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:11.470Z,1528903151.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:11.487Z,1528903151.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:19:11.488Z,1528903151.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:11.859Z,1528903151.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:11.882Z,1528903151.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:19:11.883Z,1528903151.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:12.259Z,1528903152.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:12.283Z,1528903152.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:19:12.284Z,1528903152.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:12.659Z,1528903152.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:12.683Z,1528903152.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:19:12.684Z,1528903152.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:13.059Z,1528903153.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:13.081Z,1528903153.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:19:13.082Z,1528903153.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:13.439Z,1528903153.439 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T15:19:13.439Z,1528903153.439 [NAL9602] Data Fault, FailCount= 5
2018-06-13T15:19:13.439Z,1528903153.439 [NAL9602](ERROR): Data Fault
2018-06-13T15:19:13.470Z,1528903153.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:13.495Z,1528903153.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:19:13.496Z,1528903153.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:13.593Z,1528903153.593 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T15:19:13.593Z,1528903153.593 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T15:19:13.838Z,1528903153.838 [NAL9602](INFO): Powering down
2018-06-13T15:19:13.867Z,1528903153.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:13.885Z,1528903153.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:19:13.886Z,1528903153.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:13.961Z,1528903153.961 [CBIT](INFO): Critical error at 20180613T151913
2018-06-13T15:19:14.261Z,1528903154.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:14.279Z,1528903154.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T15:19:14.280Z,1528903154.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:14.661Z,1528903154.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:14.678Z,1528903154.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T15:19:14.679Z,1528903154.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:15.055Z,1528903155.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:15.073Z,1528903155.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T15:19:15.074Z,1528903155.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:15.458Z,1528903155.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:15.490Z,1528903155.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T15:19:15.491Z,1528903155.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:15.860Z,1528903155.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:15.877Z,1528903155.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T15:19:15.878Z,1528903155.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:16.261Z,1528903156.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:16.285Z,1528903156.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T15:19:16.286Z,1528903156.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:16.658Z,1528903156.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:16.700Z,1528903156.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T15:19:16.717Z,1528903156.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:17.060Z,1528903157.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:17.077Z,1528903157.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T15:19:17.078Z,1528903157.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:17.459Z,1528903157.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:17.477Z,1528903157.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T15:19:17.478Z,1528903157.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:17.860Z,1528903157.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:17.884Z,1528903157.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T15:19:17.885Z,1528903157.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:18.255Z,1528903158.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:18.276Z,1528903158.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T15:19:18.277Z,1528903158.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:18.660Z,1528903158.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:18.684Z,1528903158.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:19:18.685Z,1528903158.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:19.058Z,1528903159.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:19.089Z,1528903159.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:19:19.090Z,1528903159.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:19.455Z,1528903159.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:19.479Z,1528903159.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T15:19:19.480Z,1528903159.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:19.860Z,1528903159.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:19.877Z,1528903159.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T15:19:19.878Z,1528903159.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:20.259Z,1528903160.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:20.276Z,1528903160.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:19:20.277Z,1528903160.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:20.659Z,1528903160.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:20.677Z,1528903160.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:19:20.678Z,1528903160.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:21.061Z,1528903161.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:21.078Z,1528903161.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:19:21.079Z,1528903161.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:21.458Z,1528903161.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:21.480Z,1528903161.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T15:19:21.482Z,1528903161.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:21.855Z,1528903161.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:21.879Z,1528903161.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T15:19:21.880Z,1528903161.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:22.260Z,1528903162.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:22.284Z,1528903162.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T15:19:22.285Z,1528903162.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:22.658Z,1528903162.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:22.680Z,1528903162.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T15:19:22.681Z,1528903162.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:23.055Z,1528903163.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:23.079Z,1528903163.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T15:19:23.080Z,1528903163.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:23.460Z,1528903163.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:23.484Z,1528903163.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:23.858Z,1528903163.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:23.889Z,1528903163.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:24.259Z,1528903164.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:24.277Z,1528903164.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:24.650Z,1528903164.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:24.687Z,1528903164.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:25.058Z,1528903165.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:25.082Z,1528903165.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:25.460Z,1528903165.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:25.477Z,1528903165.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:25.865Z,1528903165.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:25.883Z,1528903165.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:26.258Z,1528903166.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:26.282Z,1528903166.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:26.660Z,1528903166.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:26.678Z,1528903166.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:27.064Z,1528903167.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:27.088Z,1528903167.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:27.458Z,1528903167.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:27.482Z,1528903167.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:27.851Z,1528903167.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:27.879Z,1528903167.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:28.260Z,1528903168.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:28.279Z,1528903168.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:28.659Z,1528903168.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:28.693Z,1528903168.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:29.055Z,1528903169.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:29.088Z,1528903169.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:29.459Z,1528903169.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:29.504Z,1528903169.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:29.855Z,1528903169.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:29.891Z,1528903169.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:30.254Z,1528903170.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:30.282Z,1528903170.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:30.658Z,1528903170.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:30.687Z,1528903170.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:31.058Z,1528903171.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:31.087Z,1528903171.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:31.454Z,1528903171.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:31.482Z,1528903171.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:31.858Z,1528903171.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:31.893Z,1528903171.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:32.254Z,1528903172.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:32.282Z,1528903172.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:32.659Z,1528903172.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:32.687Z,1528903172.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:33.058Z,1528903173.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:33.092Z,1528903173.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:33.458Z,1528903173.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:33.496Z,1528903173.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:36.567Z,1528903176.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:36.585Z,1528903176.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:36.702Z,1528903176.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:36.738Z,1528903176.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:37.102Z,1528903177.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:37.136Z,1528903177.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:37.502Z,1528903177.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:37.520Z,1528903177.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:37.902Z,1528903177.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:37.920Z,1528903177.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:38.302Z,1528903178.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:38.319Z,1528903178.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:38.703Z,1528903178.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:38.721Z,1528903178.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:39.102Z,1528903179.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:39.120Z,1528903179.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:39.502Z,1528903179.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:39.520Z,1528903179.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:39.902Z,1528903179.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:39.919Z,1528903179.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:40.302Z,1528903180.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:40.320Z,1528903180.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:40.702Z,1528903180.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:40.720Z,1528903180.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:41.098Z,1528903181.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:41.115Z,1528903181.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:41.502Z,1528903181.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:41.520Z,1528903181.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:41.902Z,1528903181.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:41.926Z,1528903181.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:42.302Z,1528903182.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:42.357Z,1528903182.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:42.700Z,1528903182.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:42.718Z,1528903182.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:43.102Z,1528903183.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:43.124Z,1528903183.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:43.503Z,1528903183.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:43.520Z,1528903183.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:43.901Z,1528903183.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:43.920Z,1528903183.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:44.302Z,1528903184.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:44.320Z,1528903184.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:44.701Z,1528903184.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:44.719Z,1528903184.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:45.099Z,1528903185.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:45.118Z,1528903185.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:45.502Z,1528903185.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:45.525Z,1528903185.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:45.901Z,1528903185.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:45.918Z,1528903185.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:46.301Z,1528903186.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:46.319Z,1528903186.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:46.701Z,1528903186.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:46.724Z,1528903186.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:47.099Z,1528903187.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:47.124Z,1528903187.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:47.499Z,1528903187.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:47.518Z,1528903187.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:47.901Z,1528903187.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:47.919Z,1528903187.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:48.301Z,1528903188.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:48.319Z,1528903188.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:48.699Z,1528903188.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:48.717Z,1528903188.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:49.101Z,1528903189.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:49.124Z,1528903189.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:49.501Z,1528903189.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:49.518Z,1528903189.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:49.903Z,1528903189.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:49.921Z,1528903189.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:50.303Z,1528903190.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:50.337Z,1528903190.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:50.703Z,1528903190.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:50.721Z,1528903190.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:51.104Z,1528903191.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:51.122Z,1528903191.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:51.504Z,1528903191.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:51.522Z,1528903191.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:51.903Z,1528903191.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:51.928Z,1528903191.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:52.304Z,1528903192.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:52.323Z,1528903192.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:52.704Z,1528903192.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:52.728Z,1528903192.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:53.101Z,1528903193.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:53.131Z,1528903193.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:53.504Z,1528903193.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:53.522Z,1528903193.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:53.904Z,1528903193.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:53.922Z,1528903193.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:54.304Z,1528903194.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:54.321Z,1528903194.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:54.703Z,1528903194.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:54.728Z,1528903194.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:55.098Z,1528903195.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:55.154Z,1528903195.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:55.503Z,1528903195.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:55.521Z,1528903195.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:55.903Z,1528903195.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:55.922Z,1528903195.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:56.304Z,1528903196.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:56.328Z,1528903196.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:56.699Z,1528903196.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:56.724Z,1528903196.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:57.100Z,1528903197.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:57.118Z,1528903197.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:57.504Z,1528903197.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:57.528Z,1528903197.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:57.904Z,1528903197.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:57.921Z,1528903197.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:58.307Z,1528903198.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:58.324Z,1528903198.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:58.704Z,1528903198.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:58.722Z,1528903198.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:59.103Z,1528903199.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:59.122Z,1528903199.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:59.499Z,1528903199.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:59.517Z,1528903199.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:19:59.904Z,1528903199.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:19:59.928Z,1528903199.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:00.299Z,1528903200.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:00.324Z,1528903200.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:00.699Z,1528903200.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:00.717Z,1528903200.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:01.107Z,1528903201.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:01.124Z,1528903201.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:01.503Z,1528903201.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:01.520Z,1528903201.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:01.901Z,1528903201.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:01.919Z,1528903201.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:02.304Z,1528903202.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:02.328Z,1528903202.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:02.704Z,1528903202.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:02.722Z,1528903202.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:03.104Z,1528903203.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:03.122Z,1528903203.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:03.496Z,1528903203.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:03.531Z,1528903203.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:03.904Z,1528903203.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:03.922Z,1528903203.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:04.300Z,1528903204.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:04.318Z,1528903204.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:04.704Z,1528903204.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:04.722Z,1528903204.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:05.103Z,1528903205.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:05.121Z,1528903205.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:05.500Z,1528903205.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:05.518Z,1528903205.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:05.904Z,1528903205.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:05.923Z,1528903205.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:06.304Z,1528903206.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:06.321Z,1528903206.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:06.701Z,1528903206.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:06.719Z,1528903206.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:07.096Z,1528903207.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:07.128Z,1528903207.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:07.503Z,1528903207.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:07.527Z,1528903207.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:07.900Z,1528903207.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:07.936Z,1528903207.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:08.308Z,1528903208.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:08.326Z,1528903208.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:08.698Z,1528903208.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:08.731Z,1528903208.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:09.103Z,1528903209.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:09.162Z,1528903209.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:09.502Z,1528903209.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:09.526Z,1528903209.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:09.902Z,1528903209.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:09.927Z,1528903209.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:10.294Z,1528903210.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:10.322Z,1528903210.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:10.704Z,1528903210.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:10.723Z,1528903210.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:11.104Z,1528903211.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:11.121Z,1528903211.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:11.494Z,1528903211.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:11.531Z,1528903211.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:11.904Z,1528903211.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:11.922Z,1528903211.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:12.304Z,1528903212.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:12.322Z,1528903212.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:12.695Z,1528903212.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:12.730Z,1528903212.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:13.099Z,1528903213.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:13.132Z,1528903213.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:13.495Z,1528903213.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:13.532Z,1528903213.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:13.898Z,1528903213.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:13.926Z,1528903213.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:14.298Z,1528903214.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:14.326Z,1528903214.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:14.698Z,1528903214.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:14.726Z,1528903214.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:15.094Z,1528903215.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:15.136Z,1528903215.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:15.498Z,1528903215.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:15.536Z,1528903215.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:15.898Z,1528903215.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:15.926Z,1528903215.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:16.298Z,1528903216.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:16.326Z,1528903216.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:16.698Z,1528903216.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:16.733Z,1528903216.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:17.098Z,1528903217.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:17.125Z,1528903217.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:17.498Z,1528903217.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:17.527Z,1528903217.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:17.898Z,1528903217.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:17.925Z,1528903217.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:18.302Z,1528903218.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:18.330Z,1528903218.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:18.698Z,1528903218.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:18.735Z,1528903218.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:19.102Z,1528903219.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:19.130Z,1528903219.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:19.499Z,1528903219.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:19.534Z,1528903219.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:19.899Z,1528903219.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:19.936Z,1528903219.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:20.300Z,1528903220.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:20.338Z,1528903220.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:20.695Z,1528903220.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:20.766Z,1528903220.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:21.094Z,1528903221.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:21.141Z,1528903221.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:21.498Z,1528903221.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:21.535Z,1528903221.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:21.898Z,1528903221.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:21.932Z,1528903221.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:22.298Z,1528903222.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:22.338Z,1528903222.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:22.698Z,1528903222.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:22.732Z,1528903222.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:23.094Z,1528903223.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:23.139Z,1528903223.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:23.498Z,1528903223.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:23.536Z,1528903223.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:23.898Z,1528903223.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:23.940Z,1528903223.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:24.297Z,1528903224.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:24.314Z,1528903224.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:24.696Z,1528903224.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:24.714Z,1528903224.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:25.100Z,1528903225.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:25.139Z,1528903225.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:25.501Z,1528903225.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:25.518Z,1528903225.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:25.901Z,1528903225.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:25.919Z,1528903225.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:26.301Z,1528903226.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:26.319Z,1528903226.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:26.697Z,1528903226.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:26.714Z,1528903226.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:27.097Z,1528903227.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:27.116Z,1528903227.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:27.501Z,1528903227.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:27.519Z,1528903227.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:27.901Z,1528903227.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:27.919Z,1528903227.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:28.298Z,1528903228.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:28.316Z,1528903228.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:28.701Z,1528903228.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:28.719Z,1528903228.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:29.097Z,1528903229.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:29.120Z,1528903229.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:29.502Z,1528903229.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:29.520Z,1528903229.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:29.906Z,1528903229.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:29.924Z,1528903229.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:33.023Z,1528903233.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:33.050Z,1528903233.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:33.163Z,1528903233.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:33.215Z,1528903233.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:33.570Z,1528903233.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:33.628Z,1528903233.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:33.966Z,1528903233.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:34.007Z,1528903234.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:34.366Z,1528903234.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:34.384Z,1528903234.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:34.766Z,1528903234.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:34.784Z,1528903234.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:35.166Z,1528903235.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:35.185Z,1528903235.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:35.570Z,1528903235.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:35.588Z,1528903235.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:35.970Z,1528903235.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:35.992Z,1528903235.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:36.369Z,1528903236.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:36.386Z,1528903236.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:36.765Z,1528903236.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:36.783Z,1528903236.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:37.173Z,1528903237.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:37.196Z,1528903237.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:37.569Z,1528903237.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:37.586Z,1528903237.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:37.970Z,1528903237.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:37.987Z,1528903237.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:38.364Z,1528903238.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:38.405Z,1528903238.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:38.767Z,1528903238.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:38.792Z,1528903238.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:39.167Z,1528903239.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:39.184Z,1528903239.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:39.569Z,1528903239.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:39.587Z,1528903239.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:39.969Z,1528903239.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:39.987Z,1528903239.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:40.367Z,1528903240.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:40.385Z,1528903240.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:40.770Z,1528903240.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:40.787Z,1528903240.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:41.169Z,1528903241.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:41.186Z,1528903241.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:41.567Z,1528903241.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:41.585Z,1528903241.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:41.969Z,1528903241.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:41.992Z,1528903241.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:42.369Z,1528903242.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:42.386Z,1528903242.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:42.770Z,1528903242.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:42.788Z,1528903242.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:43.169Z,1528903243.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:43.187Z,1528903243.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:43.567Z,1528903243.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:43.585Z,1528903243.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:43.969Z,1528903243.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:43.987Z,1528903243.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:44.370Z,1528903244.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:44.387Z,1528903244.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:44.769Z,1528903244.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:44.787Z,1528903244.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:45.169Z,1528903245.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:45.187Z,1528903245.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:45.564Z,1528903245.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:45.597Z,1528903245.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:45.969Z,1528903245.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:45.986Z,1528903245.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:46.367Z,1528903246.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:46.392Z,1528903246.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:46.770Z,1528903246.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:46.819Z,1528903246.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:47.171Z,1528903247.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:47.196Z,1528903247.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:47.569Z,1528903247.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:47.587Z,1528903247.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:47.970Z,1528903247.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:47.992Z,1528903247.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:48.371Z,1528903248.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:48.388Z,1528903248.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:48.771Z,1528903248.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:48.789Z,1528903248.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:49.170Z,1528903249.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:49.192Z,1528903249.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:49.572Z,1528903249.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:49.589Z,1528903249.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:49.971Z,1528903249.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:49.989Z,1528903249.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:50.364Z,1528903250.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:50.398Z,1528903250.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:50.772Z,1528903250.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:50.790Z,1528903250.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:51.168Z,1528903251.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:51.186Z,1528903251.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:51.572Z,1528903251.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:51.590Z,1528903251.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:51.964Z,1528903251.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:51.998Z,1528903251.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:52.372Z,1528903252.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:52.390Z,1528903252.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:52.772Z,1528903252.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:52.796Z,1528903252.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:53.172Z,1528903253.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:53.190Z,1528903253.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:53.568Z,1528903253.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:53.586Z,1528903253.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:53.972Z,1528903253.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:53.996Z,1528903253.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:54.373Z,1528903254.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:54.391Z,1528903254.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:54.772Z,1528903254.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:54.790Z,1528903254.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:55.173Z,1528903255.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:55.191Z,1528903255.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:55.572Z,1528903255.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:55.590Z,1528903255.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:55.972Z,1528903255.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:55.990Z,1528903255.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:56.372Z,1528903256.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:56.395Z,1528903256.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:56.772Z,1528903256.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:56.791Z,1528903256.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:57.172Z,1528903257.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:57.190Z,1528903257.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:57.575Z,1528903257.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:57.594Z,1528903257.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:57.973Z,1528903257.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:57.991Z,1528903257.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:58.372Z,1528903258.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:58.391Z,1528903258.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:58.764Z,1528903258.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:58.804Z,1528903258.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:59.174Z,1528903259.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:59.192Z,1528903259.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:59.572Z,1528903259.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:20:59.597Z,1528903259.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:20:59.972Z,1528903259.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:00.008Z,1528903260.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:00.372Z,1528903260.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:00.390Z,1528903260.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:00.772Z,1528903260.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:00.791Z,1528903260.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:01.172Z,1528903261.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:01.191Z,1528903261.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:01.572Z,1528903261.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:01.590Z,1528903261.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:01.972Z,1528903261.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:01.990Z,1528903261.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:02.372Z,1528903262.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:02.390Z,1528903262.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:02.772Z,1528903262.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:02.790Z,1528903262.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:03.168Z,1528903263.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:03.187Z,1528903263.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:03.572Z,1528903263.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:03.590Z,1528903263.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:03.973Z,1528903263.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:03.991Z,1528903263.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:04.368Z,1528903264.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:04.386Z,1528903264.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:04.772Z,1528903264.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:04.790Z,1528903264.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:05.167Z,1528903265.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:05.191Z,1528903265.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:05.569Z,1528903265.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:05.587Z,1528903265.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:05.972Z,1528903265.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:06.002Z,1528903266.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:06.367Z,1528903266.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:06.392Z,1528903266.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:06.769Z,1528903266.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:06.787Z,1528903266.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:07.170Z,1528903267.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:07.192Z,1528903267.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:07.573Z,1528903267.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:07.591Z,1528903267.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:07.972Z,1528903267.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:07.991Z,1528903267.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:08.370Z,1528903268.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:08.400Z,1528903268.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:08.766Z,1528903268.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:08.795Z,1528903268.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:09.162Z,1528903269.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:09.198Z,1528903269.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:09.566Z,1528903269.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:09.604Z,1528903269.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:09.962Z,1528903269.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:09.995Z,1528903269.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:10.366Z,1528903270.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:10.393Z,1528903270.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:10.767Z,1528903270.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:10.794Z,1528903270.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:11.162Z,1528903271.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:11.189Z,1528903271.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:11.566Z,1528903271.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:11.593Z,1528903271.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:11.966Z,1528903271.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:12.003Z,1528903272.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:12.362Z,1528903272.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:12.395Z,1528903272.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:12.762Z,1528903272.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:12.799Z,1528903272.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:13.166Z,1528903273.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:13.193Z,1528903273.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:13.562Z,1528903273.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:13.595Z,1528903273.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:13.678Z,1528903273.678 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T15:21:13.678Z,1528903273.678 [NAL9602] No Fault, FailCount= 5
2018-06-13T15:21:13.946Z,1528903273.946 [NAL9602](INFO): Powering up NAL9602
2018-06-13T15:21:13.964Z,1528903273.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:14.004Z,1528903274.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:14.366Z,1528903274.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:14.400Z,1528903274.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:14.766Z,1528903274.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:14.800Z,1528903274.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:15.162Z,1528903275.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:15.196Z,1528903275.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:15.568Z,1528903275.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:15.602Z,1528903275.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:15.962Z,1528903275.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:15.980Z,1528903275.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:16.362Z,1528903276.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:16.380Z,1528903276.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:16.766Z,1528903276.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:16.784Z,1528903276.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:17.162Z,1528903277.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:17.184Z,1528903277.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:17.566Z,1528903277.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:17.585Z,1528903277.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:17.970Z,1528903277.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:17.988Z,1528903277.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:18.365Z,1528903278.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:18.388Z,1528903278.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:18.769Z,1528903278.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:18.787Z,1528903278.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:19.170Z,1528903279.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:19.188Z,1528903279.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:19.569Z,1528903279.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:19.592Z,1528903279.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:19.969Z,1528903279.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:19.987Z,1528903279.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:20.370Z,1528903280.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:20.388Z,1528903280.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:20.765Z,1528903280.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:20.783Z,1528903280.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:21.170Z,1528903281.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:21.188Z,1528903281.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:21.570Z,1528903281.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:21.588Z,1528903281.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:21.969Z,1528903281.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:21.987Z,1528903281.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:22.370Z,1528903282.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:22.388Z,1528903282.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:22.770Z,1528903282.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:22.787Z,1528903282.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:23.169Z,1528903283.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:23.187Z,1528903283.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:23.569Z,1528903283.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:23.587Z,1528903283.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:23.970Z,1528903283.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:23.988Z,1528903283.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:24.383Z,1528903284.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:24.414Z,1528903284.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:24.753Z,1528903284.753 [NAL9602](INFO): NAL9602 initialized
2018-06-13T15:21:24.769Z,1528903284.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:24.810Z,1528903284.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:25.170Z,1528903285.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:25.223Z,1528903285.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:25.577Z,1528903285.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:25.595Z,1528903285.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:25.981Z,1528903285.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:25.999Z,1528903285.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:26.382Z,1528903286.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:26.400Z,1528903286.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:26.767Z,1528903286.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:26.797Z,1528903286.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:27.174Z,1528903287.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:27.192Z,1528903287.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:27.571Z,1528903287.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:27.601Z,1528903287.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:27.979Z,1528903287.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:27.997Z,1528903287.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:28.382Z,1528903288.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:28.404Z,1528903288.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:28.782Z,1528903288.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:28.800Z,1528903288.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:29.167Z,1528903289.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:29.192Z,1528903289.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:29.573Z,1528903289.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:29.591Z,1528903289.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:29.972Z,1528903289.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:30.002Z,1528903290.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:30.372Z,1528903290.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:30.391Z,1528903290.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:30.783Z,1528903290.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:30.808Z,1528903290.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:31.186Z,1528903291.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:31.205Z,1528903291.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:31.583Z,1528903291.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:31.601Z,1528903291.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:31.974Z,1528903291.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:31.992Z,1528903291.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:32.378Z,1528903292.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:32.396Z,1528903292.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:32.774Z,1528903292.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:32.792Z,1528903292.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:33.177Z,1528903293.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:33.195Z,1528903293.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:33.578Z,1528903293.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:33.596Z,1528903293.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:36.722Z,1528903296.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:36.741Z,1528903296.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:36.861Z,1528903296.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:36.905Z,1528903296.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:37.277Z,1528903297.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:37.295Z,1528903297.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:37.651Z,1528903297.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:37.688Z,1528903297.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:38.052Z,1528903298.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:38.091Z,1528903298.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:38.451Z,1528903298.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:38.485Z,1528903298.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:38.857Z,1528903298.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:38.888Z,1528903298.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:39.270Z,1528903299.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:39.298Z,1528903299.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:39.669Z,1528903299.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:39.697Z,1528903299.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:40.055Z,1528903300.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:40.073Z,1528903300.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:40.454Z,1528903300.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:40.472Z,1528903300.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:40.855Z,1528903300.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:40.873Z,1528903300.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:41.250Z,1528903301.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:41.268Z,1528903301.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:41.665Z,1528903301.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:41.701Z,1528903301.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:42.069Z,1528903302.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:42.107Z,1528903302.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:42.462Z,1528903302.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:42.480Z,1528903302.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:42.857Z,1528903302.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:42.880Z,1528903302.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:43.251Z,1528903303.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:43.286Z,1528903303.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:43.663Z,1528903303.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:43.681Z,1528903303.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:44.066Z,1528903304.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:44.084Z,1528903304.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:44.465Z,1528903304.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:44.483Z,1528903304.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:44.859Z,1528903304.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:44.877Z,1528903304.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:45.257Z,1528903305.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:45.275Z,1528903305.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:45.665Z,1528903305.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:45.683Z,1528903305.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:46.063Z,1528903306.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:46.080Z,1528903306.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:46.463Z,1528903306.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:46.481Z,1528903306.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:46.852Z,1528903306.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:46.879Z,1528903306.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:47.251Z,1528903307.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:47.276Z,1528903307.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:47.663Z,1528903307.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:47.681Z,1528903307.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:48.066Z,1528903308.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:48.084Z,1528903308.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:48.462Z,1528903308.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:48.480Z,1528903308.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:48.858Z,1528903308.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:48.877Z,1528903308.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:49.257Z,1528903309.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:49.275Z,1528903309.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:49.662Z,1528903309.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:49.680Z,1528903309.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:50.065Z,1528903310.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:50.083Z,1528903310.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:50.465Z,1528903310.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:50.483Z,1528903310.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:50.851Z,1528903310.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:50.878Z,1528903310.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:51.257Z,1528903311.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:51.275Z,1528903311.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:51.665Z,1528903311.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:51.683Z,1528903311.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:52.063Z,1528903312.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:52.081Z,1528903312.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:52.466Z,1528903312.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:52.484Z,1528903312.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:52.859Z,1528903312.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:52.877Z,1528903312.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:53.259Z,1528903313.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:53.278Z,1528903313.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:53.664Z,1528903313.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:53.682Z,1528903313.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:54.067Z,1528903314.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:54.085Z,1528903314.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:54.465Z,1528903314.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:54.483Z,1528903314.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:54.850Z,1528903314.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:54.875Z,1528903314.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:55.259Z,1528903315.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:55.277Z,1528903315.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:55.664Z,1528903315.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:55.688Z,1528903315.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:56.066Z,1528903316.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:56.084Z,1528903316.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:56.468Z,1528903316.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:56.492Z,1528903316.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:56.858Z,1528903316.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:56.877Z,1528903316.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:57.253Z,1528903317.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:57.271Z,1528903317.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:57.667Z,1528903317.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:57.685Z,1528903317.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:58.066Z,1528903318.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:58.084Z,1528903318.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:58.464Z,1528903318.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:58.482Z,1528903318.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:58.859Z,1528903318.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:58.884Z,1528903318.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:59.257Z,1528903319.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:59.275Z,1528903319.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:21:59.663Z,1528903319.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:21:59.681Z,1528903319.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:00.066Z,1528903320.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:00.084Z,1528903320.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:00.463Z,1528903320.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:00.482Z,1528903320.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:00.853Z,1528903320.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:00.871Z,1528903320.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:01.259Z,1528903321.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:01.276Z,1528903321.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:01.666Z,1528903321.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:01.688Z,1528903321.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:02.066Z,1528903322.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:02.084Z,1528903322.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:02.467Z,1528903322.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:02.484Z,1528903322.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:02.856Z,1528903322.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:02.887Z,1528903322.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:03.248Z,1528903323.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:03.284Z,1528903323.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:03.670Z,1528903323.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:03.688Z,1528903323.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:04.070Z,1528903324.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:04.088Z,1528903324.088 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:04.088Z,1528903324.088 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 238
2018-06-13T15:22:04.088Z,1528903324.088 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:22:04.090Z,1528903324.090 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:04.090Z,1528903324.090 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 238
2018-06-13T15:22:04.090Z,1528903324.090 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:22:04.092Z,1528903324.092 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:04.092Z,1528903324.092 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 238
2018-06-13T15:22:04.092Z,1528903324.092 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:22:04.169Z,1528903324.169 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:22:04.169Z,1528903324.169 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:22:04.170Z,1528903324.170 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:22:04.468Z,1528903324.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:04.566Z,1528903324.566 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:22:04.567Z,1528903324.567 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 238
2018-06-13T15:22:04.567Z,1528903324.567 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:22:04.567Z,1528903324.567 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 238
2018-06-13T15:22:04.568Z,1528903324.568 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:22:04.568Z,1528903324.568 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 238
2018-06-13T15:22:04.852Z,1528903324.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:04.887Z,1528903324.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:22:04.887Z,1528903324.887 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:22:04.888Z,1528903324.888 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:22:04.888Z,1528903324.888 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:22:04.888Z,1528903324.888 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:22:04.889Z,1528903324.889 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:22:04.889Z,1528903324.889 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:22:04.890Z,1528903324.890 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:22:04.890Z,1528903324.890 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:22:05.247Z,1528903325.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:05.280Z,1528903325.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:22:05.285Z,1528903325.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:05.657Z,1528903325.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:05.691Z,1528903325.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:22:05.692Z,1528903325.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:06.065Z,1528903326.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:06.099Z,1528903326.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:22:06.100Z,1528903326.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:06.461Z,1528903326.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:06.489Z,1528903326.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:22:06.490Z,1528903326.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:06.852Z,1528903326.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:06.885Z,1528903326.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:22:06.886Z,1528903326.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:07.252Z,1528903327.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:07.269Z,1528903327.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:22:07.270Z,1528903327.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:07.662Z,1528903327.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:07.695Z,1528903327.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:22:07.696Z,1528903327.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:08.065Z,1528903328.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:08.099Z,1528903328.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:22:08.100Z,1528903328.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:08.465Z,1528903328.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:08.504Z,1528903328.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:22:08.509Z,1528903328.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:08.857Z,1528903328.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:08.875Z,1528903328.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:22:08.876Z,1528903328.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:09.253Z,1528903329.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:09.270Z,1528903329.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:22:09.271Z,1528903329.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:09.665Z,1528903329.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:09.683Z,1528903329.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:22:09.684Z,1528903329.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:10.066Z,1528903330.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:10.084Z,1528903330.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:22:10.085Z,1528903330.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:10.462Z,1528903330.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:10.479Z,1528903330.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:22:10.480Z,1528903330.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:10.856Z,1528903330.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:10.882Z,1528903330.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:22:10.883Z,1528903330.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:11.255Z,1528903331.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:11.279Z,1528903331.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:22:11.280Z,1528903331.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:11.663Z,1528903331.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:11.680Z,1528903331.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:22:11.681Z,1528903331.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:12.066Z,1528903332.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:12.092Z,1528903332.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:22:12.093Z,1528903332.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:12.466Z,1528903332.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:12.484Z,1528903332.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:22:12.485Z,1528903332.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:12.857Z,1528903332.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:12.874Z,1528903332.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:22:12.875Z,1528903332.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:13.256Z,1528903333.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:13.282Z,1528903333.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:22:13.283Z,1528903333.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:13.647Z,1528903333.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:13.681Z,1528903333.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:22:13.682Z,1528903333.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:14.064Z,1528903334.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:14.082Z,1528903334.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:22:14.082Z,1528903334.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:14.470Z,1528903334.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:14.491Z,1528903334.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:22:14.492Z,1528903334.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:14.868Z,1528903334.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:14.886Z,1528903334.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:22:14.887Z,1528903334.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:15.247Z,1528903335.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:15.276Z,1528903335.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T15:22:15.281Z,1528903335.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:15.651Z,1528903335.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:15.684Z,1528903335.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T15:22:15.685Z,1528903335.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:16.048Z,1528903336.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:16.066Z,1528903336.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T15:22:16.066Z,1528903336.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:16.447Z,1528903336.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:16.464Z,1528903336.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T15:22:16.465Z,1528903336.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:16.866Z,1528903336.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:16.894Z,1528903336.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T15:22:16.895Z,1528903336.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:17.265Z,1528903337.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:17.293Z,1528903337.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T15:22:17.294Z,1528903337.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:17.661Z,1528903337.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:17.695Z,1528903337.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T15:22:17.696Z,1528903337.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:18.051Z,1528903338.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:18.069Z,1528903338.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T15:22:18.070Z,1528903338.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:18.455Z,1528903338.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:18.473Z,1528903338.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T15:22:18.474Z,1528903338.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:18.850Z,1528903338.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:18.867Z,1528903338.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T15:22:18.868Z,1528903338.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:19.255Z,1528903339.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:19.273Z,1528903339.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T15:22:19.274Z,1528903339.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:19.655Z,1528903339.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:19.672Z,1528903339.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:22:19.673Z,1528903339.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:20.057Z,1528903340.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:20.075Z,1528903340.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:22:20.076Z,1528903340.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:20.469Z,1528903340.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:20.502Z,1528903340.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T15:22:20.503Z,1528903340.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:20.865Z,1528903340.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:20.900Z,1528903340.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T15:22:20.905Z,1528903340.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:21.252Z,1528903341.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:21.269Z,1528903341.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:22:21.270Z,1528903341.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:21.655Z,1528903341.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:21.680Z,1528903341.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:22:21.681Z,1528903341.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:22.057Z,1528903342.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:22.075Z,1528903342.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:22:22.075Z,1528903342.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:22.453Z,1528903342.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:22.471Z,1528903342.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T15:22:22.472Z,1528903342.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:22.865Z,1528903342.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:22.883Z,1528903342.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T15:22:22.884Z,1528903342.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:23.270Z,1528903343.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:23.287Z,1528903343.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T15:22:23.288Z,1528903343.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:23.665Z,1528903343.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:23.688Z,1528903343.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T15:22:23.689Z,1528903343.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:24.059Z,1528903344.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:24.076Z,1528903344.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T15:22:24.077Z,1528903344.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:24.455Z,1528903344.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:24.488Z,1528903344.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:24.854Z,1528903344.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:24.872Z,1528903344.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:25.259Z,1528903345.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:25.277Z,1528903345.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:25.657Z,1528903345.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:25.675Z,1528903345.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:26.062Z,1528903346.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:26.080Z,1528903346.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:26.462Z,1528903346.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:26.484Z,1528903346.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:26.862Z,1528903346.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:26.888Z,1528903346.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:27.253Z,1528903347.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:27.272Z,1528903347.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:27.658Z,1528903347.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:27.676Z,1528903347.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:28.058Z,1528903348.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:28.076Z,1528903348.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:28.453Z,1528903348.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:28.472Z,1528903348.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:28.865Z,1528903348.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:28.884Z,1528903348.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:29.262Z,1528903349.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:29.288Z,1528903349.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:29.663Z,1528903349.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:29.681Z,1528903349.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:30.058Z,1528903350.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:30.075Z,1528903350.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:30.079Z,1528903350.079 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T15:17:29.7Z
2018-06-13T15:22:30.079Z,1528903350.079 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T15:22:30.079Z,1528903350.079 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T15:22:33.166Z,1528903353.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:33.184Z,1528903353.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:34.222Z,1528903354.222 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0276.lzma
2018-06-13T15:22:34.243Z,1528903354.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:34.280Z,1528903354.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:34.397Z,1528903354.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:34.436Z,1528903354.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:34.767Z,1528903354.767 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0276.lzma.bak
2018-06-13T15:22:34.767Z,1528903354.767 [DataOverHttps](INFO): SBD MOMSN=8329448
2018-06-13T15:22:34.823Z,1528903354.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:34.842Z,1528903354.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:36.685Z,1528903356.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:36.723Z,1528903356.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:36.835Z,1528903356.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:36.873Z,1528903356.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:37.239Z,1528903357.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:37.271Z,1528903357.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:37.635Z,1528903357.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:37.665Z,1528903357.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:38.040Z,1528903358.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:38.079Z,1528903358.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:41.177Z,1528903361.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:41.194Z,1528903361.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:41.331Z,1528903361.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:41.379Z,1528903361.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:41.738Z,1528903361.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:41.756Z,1528903361.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:42.138Z,1528903362.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:42.156Z,1528903362.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:42.525Z,1528903362.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:42.543Z,1528903362.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:42.929Z,1528903362.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:42.948Z,1528903362.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:46.038Z,1528903366.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:46.056Z,1528903366.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:46.178Z,1528903366.178 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0277.lzma
2018-06-13T15:22:46.214Z,1528903366.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:46.274Z,1528903366.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:46.626Z,1528903366.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:46.644Z,1528903366.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:46.978Z,1528903366.978 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0277.lzma.bak
2018-06-13T15:22:46.978Z,1528903366.978 [DataOverHttps](INFO): SBD MOMSN=8329451
2018-06-13T15:22:47.036Z,1528903367.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:47.055Z,1528903367.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:48.895Z,1528903368.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:48.934Z,1528903368.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:48.937Z,1528903368.937 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T15:22:48.938Z,1528903368.938 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T15:22:48.938Z,1528903368.938 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T15:22:49.051Z,1528903369.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:49.100Z,1528903369.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:49.472Z,1528903369.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:49.491Z,1528903369.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:49.872Z,1528903369.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:49.890Z,1528903369.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:50.261Z,1528903370.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:50.301Z,1528903370.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:50.652Z,1528903370.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:50.684Z,1528903370.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:51.051Z,1528903371.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:51.091Z,1528903371.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:51.455Z,1528903371.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:51.488Z,1528903371.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:51.865Z,1528903371.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:51.894Z,1528903371.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:52.269Z,1528903372.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:52.300Z,1528903372.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:55.393Z,1528903375.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:55.412Z,1528903375.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:55.523Z,1528903375.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:55.554Z,1528903375.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:55.920Z,1528903375.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:55.952Z,1528903375.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:56.322Z,1528903376.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:56.356Z,1528903376.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:56.731Z,1528903376.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:56.764Z,1528903376.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:57.134Z,1528903377.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:57.160Z,1528903377.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:57.538Z,1528903377.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:57.583Z,1528903377.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:57.926Z,1528903377.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:57.944Z,1528903377.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:58.330Z,1528903378.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:58.348Z,1528903378.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:58.723Z,1528903378.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:58.761Z,1528903378.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:59.127Z,1528903379.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:59.163Z,1528903379.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:59.542Z,1528903379.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:59.560Z,1528903379.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:22:59.934Z,1528903379.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:22:59.979Z,1528903379.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:00.327Z,1528903380.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:00.345Z,1528903380.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:00.715Z,1528903380.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:00.764Z,1528903380.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:01.128Z,1528903381.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:01.158Z,1528903381.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:01.515Z,1528903381.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:01.550Z,1528903381.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:01.975Z,1528903381.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:01.993Z,1528903381.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:02.336Z,1528903382.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:02.423Z,1528903382.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:02.724Z,1528903382.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:02.793Z,1528903382.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:03.122Z,1528903383.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:03.200Z,1528903383.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:03.522Z,1528903383.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:03.540Z,1528903383.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:03.918Z,1528903383.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:03.962Z,1528903383.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:04.318Z,1528903384.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:04.412Z,1528903384.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:04.720Z,1528903384.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:04.740Z,1528903384.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:05.123Z,1528903385.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:05.141Z,1528903385.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:05.525Z,1528903385.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:05.560Z,1528903385.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:05.926Z,1528903385.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:05.948Z,1528903385.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:06.314Z,1528903386.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:06.343Z,1528903386.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:06.720Z,1528903386.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:06.738Z,1528903386.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:07.118Z,1528903387.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:07.170Z,1528903387.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:07.518Z,1528903387.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:07.541Z,1528903387.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:07.932Z,1528903387.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:07.969Z,1528903387.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:08.332Z,1528903388.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:08.361Z,1528903388.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:08.726Z,1528903388.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:08.767Z,1528903388.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:09.120Z,1528903389.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:09.144Z,1528903389.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:09.522Z,1528903389.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:09.544Z,1528903389.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:09.917Z,1528903389.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:09.942Z,1528903389.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:10.320Z,1528903390.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:10.368Z,1528903390.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:10.720Z,1528903390.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:10.743Z,1528903390.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:11.127Z,1528903391.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:11.148Z,1528903391.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:11.531Z,1528903391.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:11.550Z,1528903391.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:11.926Z,1528903391.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:11.970Z,1528903391.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:12.321Z,1528903392.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:12.343Z,1528903392.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:12.720Z,1528903392.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:12.743Z,1528903392.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:13.120Z,1528903393.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:13.141Z,1528903393.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:13.515Z,1528903393.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:13.566Z,1528903393.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:13.926Z,1528903393.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:13.950Z,1528903393.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:14.330Z,1528903394.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:14.376Z,1528903394.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:14.729Z,1528903394.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:14.747Z,1528903394.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:15.119Z,1528903395.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:15.167Z,1528903395.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:15.517Z,1528903395.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:15.535Z,1528903395.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:15.915Z,1528903395.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:15.944Z,1528903395.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:16.319Z,1528903396.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:16.347Z,1528903396.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:16.722Z,1528903396.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:16.749Z,1528903396.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:17.126Z,1528903397.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:17.147Z,1528903397.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:17.529Z,1528903397.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:17.552Z,1528903397.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:17.931Z,1528903397.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:17.950Z,1528903397.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:18.321Z,1528903398.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:18.372Z,1528903398.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:18.719Z,1528903398.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:18.741Z,1528903398.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:19.122Z,1528903399.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:19.145Z,1528903399.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:19.515Z,1528903399.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:19.543Z,1528903399.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:19.927Z,1528903399.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:19.952Z,1528903399.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:20.330Z,1528903400.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:20.350Z,1528903400.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:20.730Z,1528903400.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:20.753Z,1528903400.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:21.119Z,1528903401.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:21.146Z,1528903401.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:21.521Z,1528903401.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:21.539Z,1528903401.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:21.915Z,1528903401.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:21.939Z,1528903401.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:22.319Z,1528903402.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:22.345Z,1528903402.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:22.722Z,1528903402.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:22.745Z,1528903402.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:23.130Z,1528903403.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:23.148Z,1528903403.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:23.533Z,1528903403.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:23.573Z,1528903403.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:23.929Z,1528903403.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:23.975Z,1528903403.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:24.316Z,1528903404.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:24.335Z,1528903404.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:24.719Z,1528903404.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:24.737Z,1528903404.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:25.118Z,1528903405.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:25.135Z,1528903405.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:25.516Z,1528903405.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:25.535Z,1528903405.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:25.929Z,1528903405.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:25.967Z,1528903405.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:26.329Z,1528903406.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:26.372Z,1528903406.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:26.722Z,1528903406.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:26.740Z,1528903406.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:27.122Z,1528903407.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:27.140Z,1528903407.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:27.519Z,1528903407.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:27.536Z,1528903407.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:27.918Z,1528903407.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:27.936Z,1528903407.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:28.323Z,1528903408.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:28.341Z,1528903408.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:28.721Z,1528903408.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:28.738Z,1528903408.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:29.123Z,1528903409.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:29.141Z,1528903409.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:29.530Z,1528903409.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:29.548Z,1528903409.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:29.927Z,1528903409.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:29.945Z,1528903409.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:30.315Z,1528903410.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:30.348Z,1528903410.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:30.719Z,1528903410.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:30.756Z,1528903410.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:31.112Z,1528903411.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:31.140Z,1528903411.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:31.511Z,1528903411.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:31.550Z,1528903411.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:31.932Z,1528903411.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:31.957Z,1528903411.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:32.332Z,1528903412.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:32.356Z,1528903412.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:32.733Z,1528903412.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:32.756Z,1528903412.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:33.115Z,1528903413.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:33.157Z,1528903413.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:33.516Z,1528903413.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:33.545Z,1528903413.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:33.912Z,1528903413.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:33.962Z,1528903413.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:34.316Z,1528903414.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:34.352Z,1528903414.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:34.711Z,1528903414.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:34.745Z,1528903414.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:35.133Z,1528903415.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:35.156Z,1528903415.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:35.536Z,1528903415.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:35.560Z,1528903415.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:35.930Z,1528903415.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:35.958Z,1528903415.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:36.311Z,1528903416.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:36.355Z,1528903416.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:36.715Z,1528903416.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:36.752Z,1528903416.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:37.110Z,1528903417.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:37.140Z,1528903417.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:37.511Z,1528903417.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:37.556Z,1528903417.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:37.926Z,1528903417.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:37.965Z,1528903417.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:38.330Z,1528903418.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:38.360Z,1528903418.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:38.721Z,1528903418.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:38.755Z,1528903418.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:39.119Z,1528903419.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:39.136Z,1528903419.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:39.514Z,1528903419.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:39.531Z,1528903419.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:39.915Z,1528903419.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:39.932Z,1528903419.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:40.320Z,1528903420.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:40.340Z,1528903420.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:40.721Z,1528903420.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:40.739Z,1528903420.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:41.126Z,1528903421.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:41.144Z,1528903421.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:41.530Z,1528903421.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:41.552Z,1528903421.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:41.932Z,1528903421.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:41.950Z,1528903421.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:42.311Z,1528903422.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:42.347Z,1528903422.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:42.720Z,1528903422.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:42.738Z,1528903422.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:43.112Z,1528903423.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:43.152Z,1528903423.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:43.511Z,1528903423.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:43.547Z,1528903423.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:43.931Z,1528903423.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:43.949Z,1528903423.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:44.332Z,1528903424.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:44.349Z,1528903424.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:44.727Z,1528903424.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:44.745Z,1528903424.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:45.119Z,1528903425.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:45.142Z,1528903425.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:45.522Z,1528903425.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:45.539Z,1528903425.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:45.911Z,1528903425.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:45.946Z,1528903425.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:46.316Z,1528903426.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:46.343Z,1528903426.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:46.711Z,1528903426.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:46.748Z,1528903426.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:47.131Z,1528903427.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:47.150Z,1528903427.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:47.535Z,1528903427.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:47.553Z,1528903427.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:47.937Z,1528903427.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:47.954Z,1528903427.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:48.311Z,1528903428.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:48.352Z,1528903428.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:48.715Z,1528903428.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:48.742Z,1528903428.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:49.119Z,1528903429.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:49.147Z,1528903429.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:49.515Z,1528903429.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:49.542Z,1528903429.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:49.935Z,1528903429.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:49.954Z,1528903429.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:50.335Z,1528903430.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:50.353Z,1528903430.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:50.730Z,1528903430.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:50.761Z,1528903430.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:51.119Z,1528903431.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:51.153Z,1528903431.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:51.519Z,1528903431.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:51.547Z,1528903431.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:51.915Z,1528903431.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:51.942Z,1528903431.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:52.319Z,1528903432.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:52.347Z,1528903432.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:52.719Z,1528903432.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:52.752Z,1528903432.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:53.134Z,1528903433.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:53.156Z,1528903433.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:56.246Z,1528903436.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:56.265Z,1528903436.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:56.408Z,1528903436.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:56.443Z,1528903436.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:56.794Z,1528903436.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:56.839Z,1528903436.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:57.194Z,1528903437.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:57.217Z,1528903437.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:57.592Z,1528903437.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:57.614Z,1528903437.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:57.000Z,1528903438.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:58.018Z,1528903438.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:58.401Z,1528903438.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:58.438Z,1528903438.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:58.798Z,1528903438.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:58.838Z,1528903438.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:59.192Z,1528903439.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:59.215Z,1528903439.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:59.596Z,1528903439.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:23:59.615Z,1528903439.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:23:59.992Z,1528903439.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:00.042Z,1528903440.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:00.392Z,1528903440.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:00.411Z,1528903440.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:00.792Z,1528903440.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:00.816Z,1528903440.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:01.201Z,1528903441.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:01.219Z,1528903441.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:01.601Z,1528903441.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:01.647Z,1528903441.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:02.001Z,1528903442.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:02.047Z,1528903442.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:02.392Z,1528903442.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:02.418Z,1528903442.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:02.791Z,1528903442.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:02.814Z,1528903442.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:03.194Z,1528903443.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:03.211Z,1528903443.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:03.594Z,1528903443.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:03.612Z,1528903443.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:03.997Z,1528903443.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:04.020Z,1528903444.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:04.403Z,1528903444.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:04.422Z,1528903444.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:04.798Z,1528903444.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:04.845Z,1528903444.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:05.192Z,1528903445.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:05.209Z,1528903445.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:05.594Z,1528903445.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:05.617Z,1528903445.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:05.992Z,1528903445.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:06.014Z,1528903446.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:06.392Z,1528903446.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:06.424Z,1528903446.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:06.791Z,1528903446.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:06.815Z,1528903446.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:07.201Z,1528903447.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:07.224Z,1528903447.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:07.604Z,1528903447.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:07.625Z,1528903447.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:08.002Z,1528903448.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:08.029Z,1528903448.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:08.397Z,1528903448.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:08.420Z,1528903448.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:08.792Z,1528903448.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:08.810Z,1528903448.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:09.194Z,1528903449.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:09.217Z,1528903449.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:09.593Z,1528903449.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:09.611Z,1528903449.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:10.003Z,1528903450.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:10.021Z,1528903450.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:10.408Z,1528903450.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:10.436Z,1528903450.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:10.807Z,1528903450.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:10.829Z,1528903450.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:11.191Z,1528903451.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:11.224Z,1528903451.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:11.594Z,1528903451.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:11.616Z,1528903451.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:11.997Z,1528903451.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:12.016Z,1528903452.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:12.392Z,1528903452.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:12.422Z,1528903452.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:12.791Z,1528903452.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:12.824Z,1528903452.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:13.205Z,1528903453.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:13.227Z,1528903453.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:13.607Z,1528903453.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:13.630Z,1528903453.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:14.008Z,1528903454.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:14.036Z,1528903454.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:14.394Z,1528903454.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:14.416Z,1528903454.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:14.791Z,1528903454.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:14.820Z,1528903454.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:15.197Z,1528903455.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:15.215Z,1528903455.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:15.587Z,1528903455.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:15.625Z,1528903455.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:16.003Z,1528903456.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:16.028Z,1528903456.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:16.409Z,1528903456.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:16.432Z,1528903456.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:16.804Z,1528903456.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:16.822Z,1528903456.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:17.187Z,1528903457.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:17.229Z,1528903457.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:17.587Z,1528903457.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:17.617Z,1528903457.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:17.987Z,1528903457.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:18.024Z,1528903458.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:18.391Z,1528903458.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:18.419Z,1528903458.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:18.788Z,1528903458.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:18.829Z,1528903458.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:19.197Z,1528903459.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:19.222Z,1528903459.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:19.603Z,1528903459.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:19.621Z,1528903459.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:20.012Z,1528903460.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:20.041Z,1528903460.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:20.388Z,1528903460.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:20.415Z,1528903460.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:20.787Z,1528903460.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:20.823Z,1528903460.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:21.188Z,1528903461.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:21.224Z,1528903461.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:21.583Z,1528903461.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:21.621Z,1528903461.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:22.002Z,1528903462.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:22.032Z,1528903462.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:22.409Z,1528903462.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:22.428Z,1528903462.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:22.793Z,1528903462.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:22.824Z,1528903462.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:23.187Z,1528903463.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:23.228Z,1528903463.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:23.587Z,1528903463.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:23.618Z,1528903463.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:23.987Z,1528903463.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:24.005Z,1528903464.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:24.391Z,1528903464.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:24.409Z,1528903464.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:24.790Z,1528903464.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:24.808Z,1528903464.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:25.194Z,1528903465.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:25.212Z,1528903465.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:25.601Z,1528903465.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:25.619Z,1528903465.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:26.001Z,1528903466.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:26.020Z,1528903466.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:26.394Z,1528903466.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:26.412Z,1528903466.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:26.794Z,1528903466.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:26.812Z,1528903466.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:27.195Z,1528903467.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:27.213Z,1528903467.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:27.587Z,1528903467.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:27.619Z,1528903467.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:27.998Z,1528903467.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:28.020Z,1528903468.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:28.401Z,1528903468.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:28.419Z,1528903468.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:28.799Z,1528903468.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:28.817Z,1528903468.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:29.191Z,1528903469.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:29.213Z,1528903469.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:29.594Z,1528903469.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:29.612Z,1528903469.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:29.993Z,1528903469.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:30.011Z,1528903470.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:30.394Z,1528903470.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:30.411Z,1528903470.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:30.791Z,1528903470.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:30.817Z,1528903470.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:31.204Z,1528903471.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:31.226Z,1528903471.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:31.605Z,1528903471.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:31.623Z,1528903471.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:32.002Z,1528903472.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:32.021Z,1528903472.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:32.393Z,1528903472.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:32.411Z,1528903472.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:32.793Z,1528903472.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:32.810Z,1528903472.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:33.194Z,1528903473.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:33.212Z,1528903473.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:33.583Z,1528903473.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:33.619Z,1528903473.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:34.003Z,1528903474.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:34.021Z,1528903474.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:34.408Z,1528903474.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:34.426Z,1528903474.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:34.803Z,1528903474.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:34.821Z,1528903474.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:35.183Z,1528903475.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:35.212Z,1528903475.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:35.587Z,1528903475.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:35.628Z,1528903475.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:35.983Z,1528903475.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:36.013Z,1528903476.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:36.388Z,1528903476.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:36.426Z,1528903476.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:36.787Z,1528903476.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:36.805Z,1528903476.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:37.197Z,1528903477.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:37.228Z,1528903477.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:37.601Z,1528903477.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:37.636Z,1528903477.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:38.001Z,1528903478.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:38.019Z,1528903478.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:38.392Z,1528903478.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:38.410Z,1528903478.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:38.792Z,1528903478.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:38.809Z,1528903478.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:39.194Z,1528903479.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:39.212Z,1528903479.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:39.587Z,1528903479.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:39.610Z,1528903479.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:39.998Z,1528903479.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:40.016Z,1528903480.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:40.401Z,1528903480.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:40.420Z,1528903480.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:40.798Z,1528903480.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:40.816Z,1528903480.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:41.194Z,1528903481.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:41.212Z,1528903481.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:41.594Z,1528903481.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:41.612Z,1528903481.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:41.993Z,1528903481.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:42.011Z,1528903482.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:42.394Z,1528903482.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:42.411Z,1528903482.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:42.791Z,1528903482.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:42.828Z,1528903482.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:43.199Z,1528903483.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:43.224Z,1528903483.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:43.602Z,1528903483.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:43.624Z,1528903483.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:44.004Z,1528903484.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:44.022Z,1528903484.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:44.387Z,1528903484.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:44.410Z,1528903484.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:44.793Z,1528903484.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:44.810Z,1528903484.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:45.194Z,1528903485.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:45.213Z,1528903485.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:45.587Z,1528903485.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:45.610Z,1528903485.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:46.001Z,1528903486.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:46.027Z,1528903486.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:46.403Z,1528903486.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:46.421Z,1528903486.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:46.802Z,1528903486.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:46.824Z,1528903486.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:47.193Z,1528903487.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:47.210Z,1528903487.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:47.594Z,1528903487.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:47.612Z,1528903487.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:47.987Z,1528903487.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:48.026Z,1528903488.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:48.113Z,1528903488.113 [CBIT](IMPORTANT): Beginning ground fault scan
2018-06-13T15:24:48.394Z,1528903488.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:48.412Z,1528903488.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:48.795Z,1528903488.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:48.812Z,1528903488.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:49.202Z,1528903489.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:49.224Z,1528903489.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:49.606Z,1528903489.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:49.623Z,1528903489.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:50.006Z,1528903490.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:50.024Z,1528903490.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:50.394Z,1528903490.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:50.412Z,1528903490.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:50.798Z,1528903490.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:50.816Z,1528903490.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:51.195Z,1528903491.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:51.213Z,1528903491.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:51.594Z,1528903491.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:51.611Z,1528903491.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:52.003Z,1528903492.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:52.022Z,1528903492.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:52.406Z,1528903492.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:52.428Z,1528903492.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:52.807Z,1528903492.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:52.825Z,1528903492.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:53.197Z,1528903493.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:53.215Z,1528903493.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:53.598Z,1528903493.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:53.617Z,1528903493.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:53.992Z,1528903493.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:54.011Z,1528903494.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:57.113Z,1528903497.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:57.131Z,1528903497.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:57.319Z,1528903497.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:57.337Z,1528903497.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:57.734Z,1528903497.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:57.767Z,1528903497.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:58.153Z,1528903498.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:58.171Z,1528903498.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:58.533Z,1528903498.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:58.567Z,1528903498.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:58.922Z,1528903498.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:58.940Z,1528903498.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:59.326Z,1528903499.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:59.344Z,1528903499.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:24:59.723Z,1528903499.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:24:59.749Z,1528903499.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:00.133Z,1528903500.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:00.152Z,1528903500.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:00.533Z,1528903500.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:00.552Z,1528903500.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:00.932Z,1528903500.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:00.971Z,1528903500.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:01.329Z,1528903501.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:01.348Z,1528903501.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:01.424Z,1528903501.424 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.002248
CHAN A1 (24V): -0.063107
CHAN A2 (12V): -0.000509
CHAN A3 (5V): -0.021713
CHAN B0 (3.3V): -0.000797
CHAN B1 (3.15aV): -0.000865
CHAN B2 (3.15bV): -0.000514
CHAN B3 (GND): 0.000017
OPEN: 0.003429
Full Scale Calc: 4.765 mA, -1.589 mA
2018-06-13T15:25:01.727Z,1528903501.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:01.745Z,1528903501.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:02.126Z,1528903502.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:02.144Z,1528903502.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:02.525Z,1528903502.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:02.550Z,1528903502.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:02.934Z,1528903502.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:02.976Z,1528903502.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:03.334Z,1528903503.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:03.352Z,1528903503.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:03.737Z,1528903503.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:03.755Z,1528903503.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:04.130Z,1528903504.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:04.163Z,1528903504.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:04.521Z,1528903504.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:04.555Z,1528903504.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:04.928Z,1528903504.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:04.963Z,1528903504.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:04.963Z,1528903504.963 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 239
2018-06-13T15:25:04.963Z,1528903504.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:25:04.964Z,1528903504.964 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:04.969Z,1528903504.969 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 239
2018-06-13T15:25:04.969Z,1528903504.969 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:25:04.971Z,1528903504.971 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:04.971Z,1528903504.971 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 239
2018-06-13T15:25:04.971Z,1528903504.971 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:25:05.049Z,1528903505.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:25:05.049Z,1528903505.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:25:05.050Z,1528903505.050 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:25:05.338Z,1528903505.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:05.441Z,1528903505.441 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:25:05.441Z,1528903505.441 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 239
2018-06-13T15:25:05.442Z,1528903505.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:25:05.442Z,1528903505.442 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 239
2018-06-13T15:25:05.442Z,1528903505.442 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:25:05.442Z,1528903505.442 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 239
2018-06-13T15:25:05.729Z,1528903505.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:05.765Z,1528903505.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:25:05.766Z,1528903505.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:25:05.766Z,1528903505.766 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:25:05.766Z,1528903505.766 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:25:05.767Z,1528903505.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:25:05.767Z,1528903505.767 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:25:05.767Z,1528903505.767 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:25:05.768Z,1528903505.768 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:25:05.768Z,1528903505.768 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:25:06.116Z,1528903506.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:06.136Z,1528903506.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:25:06.146Z,1528903506.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:06.523Z,1528903506.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:06.561Z,1528903506.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:25:06.562Z,1528903506.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:06.927Z,1528903506.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:06.965Z,1528903506.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:25:06.966Z,1528903506.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:07.336Z,1528903507.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:07.369Z,1528903507.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:25:07.370Z,1528903507.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:07.738Z,1528903507.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:07.772Z,1528903507.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:25:07.773Z,1528903507.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:08.137Z,1528903508.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:08.172Z,1528903508.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:25:08.173Z,1528903508.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:08.525Z,1528903508.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:08.543Z,1528903508.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:25:08.544Z,1528903508.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:08.923Z,1528903508.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:08.972Z,1528903508.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:25:08.973Z,1528903508.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:09.325Z,1528903509.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:09.370Z,1528903509.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:25:09.371Z,1528903509.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:09.725Z,1528903509.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:09.743Z,1528903509.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:25:09.743Z,1528903509.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:10.137Z,1528903510.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:10.167Z,1528903510.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:25:10.168Z,1528903510.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:10.530Z,1528903510.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:10.551Z,1528903510.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:25:10.552Z,1528903510.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:10.932Z,1528903510.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:10.950Z,1528903510.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:25:10.951Z,1528903510.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:11.330Z,1528903511.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:11.348Z,1528903511.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:25:11.349Z,1528903511.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:11.728Z,1528903511.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:11.746Z,1528903511.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:25:11.747Z,1528903511.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:12.126Z,1528903512.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:12.176Z,1528903512.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:25:12.177Z,1528903512.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:12.530Z,1528903512.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:12.577Z,1528903512.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:25:12.578Z,1528903512.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:12.922Z,1528903512.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:12.955Z,1528903512.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:25:12.956Z,1528903512.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:13.337Z,1528903513.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:13.355Z,1528903513.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:25:13.356Z,1528903513.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:13.737Z,1528903513.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:13.758Z,1528903513.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:25:13.759Z,1528903513.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:14.134Z,1528903514.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:14.151Z,1528903514.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:25:14.152Z,1528903514.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:14.525Z,1528903514.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:14.552Z,1528903514.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:25:14.557Z,1528903514.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:14.924Z,1528903514.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:14.943Z,1528903514.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:25:14.943Z,1528903514.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:15.316Z,1528903515.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:15.363Z,1528903515.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:25:15.364Z,1528903515.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:15.725Z,1528903515.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:15.749Z,1528903515.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:25:15.750Z,1528903515.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:16.143Z,1528903516.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:16.162Z,1528903516.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T15:25:16.163Z,1528903516.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:16.534Z,1528903516.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:16.564Z,1528903516.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T15:25:16.569Z,1528903516.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:16.935Z,1528903516.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:16.966Z,1528903516.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T15:25:16.967Z,1528903516.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:17.315Z,1528903517.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:17.358Z,1528903517.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T15:25:17.359Z,1528903517.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:17.715Z,1528903517.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:17.764Z,1528903517.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T15:25:17.765Z,1528903517.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:18.128Z,1528903518.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:18.152Z,1528903518.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T15:25:18.153Z,1528903518.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:18.520Z,1528903518.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:18.558Z,1528903518.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T15:25:18.559Z,1528903518.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:18.915Z,1528903518.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:18.946Z,1528903518.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T15:25:18.947Z,1528903518.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:19.340Z,1528903519.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:19.358Z,1528903519.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T15:25:19.358Z,1528903519.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:19.738Z,1528903519.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:19.756Z,1528903519.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T15:25:19.757Z,1528903519.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:20.131Z,1528903520.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:20.168Z,1528903520.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T15:25:20.168Z,1528903520.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:20.519Z,1528903520.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:20.553Z,1528903520.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:25:20.554Z,1528903520.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:20.919Z,1528903520.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:20.956Z,1528903520.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:25:20.957Z,1528903520.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:21.317Z,1528903521.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:21.361Z,1528903521.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T15:25:21.362Z,1528903521.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:21.719Z,1528903521.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:21.763Z,1528903521.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T15:25:21.764Z,1528903521.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:22.135Z,1528903522.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:22.158Z,1528903522.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:25:22.159Z,1528903522.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:22.538Z,1528903522.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:22.556Z,1528903522.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:25:22.557Z,1528903522.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:22.939Z,1528903522.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:22.956Z,1528903522.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:25:22.958Z,1528903522.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:23.330Z,1528903523.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:23.362Z,1528903523.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T15:25:23.363Z,1528903523.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:23.715Z,1528903523.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:23.751Z,1528903523.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T15:25:23.752Z,1528903523.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:24.119Z,1528903524.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:24.163Z,1528903524.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T15:25:24.164Z,1528903524.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:24.515Z,1528903524.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:24.555Z,1528903524.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T15:25:24.556Z,1528903524.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:24.915Z,1528903524.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:24.948Z,1528903524.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T15:25:24.949Z,1528903524.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:25.334Z,1528903525.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:25.372Z,1528903525.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:25.744Z,1528903525.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:25.762Z,1528903525.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:26.127Z,1528903526.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:26.161Z,1528903526.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:26.519Z,1528903526.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:26.552Z,1528903526.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:26.915Z,1528903526.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:26.955Z,1528903526.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:27.316Z,1528903527.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:27.353Z,1528903527.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:27.719Z,1528903527.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:27.760Z,1528903527.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:28.129Z,1528903528.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:28.172Z,1528903528.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:28.529Z,1528903528.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:28.570Z,1528903528.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:28.929Z,1528903528.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:28.974Z,1528903528.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:29.319Z,1528903529.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:29.362Z,1528903529.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:29.719Z,1528903529.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:29.737Z,1528903529.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:30.119Z,1528903530.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:30.137Z,1528903530.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:30.521Z,1528903530.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:30.539Z,1528903530.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:30.922Z,1528903530.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:30.945Z,1528903530.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:31.333Z,1528903531.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:31.381Z,1528903531.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:31.733Z,1528903531.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:31.751Z,1528903531.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:32.130Z,1528903532.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:32.169Z,1528903532.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:32.523Z,1528903532.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:32.546Z,1528903532.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:32.924Z,1528903532.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:32.942Z,1528903532.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:33.326Z,1528903533.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:33.344Z,1528903533.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:33.723Z,1528903533.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:33.747Z,1528903533.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:34.130Z,1528903534.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:34.153Z,1528903534.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:34.534Z,1528903534.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:34.551Z,1528903534.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:34.934Z,1528903534.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:34.951Z,1528903534.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:35.325Z,1528903535.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:35.343Z,1528903535.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:35.725Z,1528903535.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:35.748Z,1528903535.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:36.123Z,1528903536.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:36.145Z,1528903536.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:36.526Z,1528903536.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:36.543Z,1528903536.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:36.926Z,1528903536.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:36.943Z,1528903536.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:37.330Z,1528903537.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:37.353Z,1528903537.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:37.733Z,1528903537.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:37.751Z,1528903537.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:38.134Z,1528903538.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:38.151Z,1528903538.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:38.523Z,1528903538.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:38.545Z,1528903538.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:38.922Z,1528903538.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:38.948Z,1528903538.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:39.326Z,1528903539.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:39.344Z,1528903539.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:39.723Z,1528903539.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:39.757Z,1528903539.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:40.135Z,1528903540.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:40.153Z,1528903540.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:40.534Z,1528903540.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:40.558Z,1528903540.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:40.935Z,1528903540.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:40.953Z,1528903540.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:41.326Z,1528903541.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:41.344Z,1528903541.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:41.730Z,1528903541.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:41.752Z,1528903541.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:42.126Z,1528903542.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:42.143Z,1528903542.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:42.524Z,1528903542.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:42.553Z,1528903542.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:42.926Z,1528903542.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:42.943Z,1528903542.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:43.337Z,1528903543.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:43.355Z,1528903543.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:43.740Z,1528903543.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:43.764Z,1528903543.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:44.135Z,1528903544.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:44.152Z,1528903544.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:44.526Z,1528903544.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:44.548Z,1528903544.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:44.926Z,1528903544.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:44.944Z,1528903544.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:45.325Z,1528903545.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:45.344Z,1528903545.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:45.723Z,1528903545.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:45.754Z,1528903545.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:46.139Z,1528903546.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:46.160Z,1528903546.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:46.540Z,1528903546.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:46.566Z,1528903546.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:46.935Z,1528903546.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:46.954Z,1528903546.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:47.319Z,1528903547.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:47.352Z,1528903547.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:47.719Z,1528903547.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:47.752Z,1528903547.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:48.119Z,1528903548.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:48.152Z,1528903548.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:48.520Z,1528903548.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:48.550Z,1528903548.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:48.919Z,1528903548.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:48.946Z,1528903548.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:49.340Z,1528903549.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:49.358Z,1528903549.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:49.745Z,1528903549.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:49.764Z,1528903549.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:52.846Z,1528903552.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:52.864Z,1528903552.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:53.003Z,1528903553.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:53.048Z,1528903553.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:53.398Z,1528903553.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:53.427Z,1528903553.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:53.799Z,1528903553.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:53.820Z,1528903553.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:54.200Z,1528903554.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:54.224Z,1528903554.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:54.604Z,1528903554.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:54.622Z,1528903554.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:55.003Z,1528903555.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:55.021Z,1528903555.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:55.393Z,1528903555.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:55.432Z,1528903555.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:55.803Z,1528903555.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:55.847Z,1528903555.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:56.190Z,1528903556.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:56.217Z,1528903556.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:56.599Z,1528903556.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:56.618Z,1528903556.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:56.995Z,1528903556.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:57.025Z,1528903557.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:57.404Z,1528903557.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:57.443Z,1528903557.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:57.805Z,1528903557.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:57.829Z,1528903557.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:58.205Z,1528903558.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:58.228Z,1528903558.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:58.587Z,1528903558.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:58.629Z,1528903558.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:58.991Z,1528903558.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:59.046Z,1528903559.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:59.396Z,1528903559.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:59.423Z,1528903559.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:25:59.788Z,1528903559.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:25:59.822Z,1528903559.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:00.203Z,1528903560.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:00.226Z,1528903560.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:00.606Z,1528903560.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:00.632Z,1528903560.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:01.005Z,1528903561.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:01.024Z,1528903561.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:01.391Z,1528903561.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:01.429Z,1528903561.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:01.794Z,1528903561.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:01.829Z,1528903561.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:02.183Z,1528903562.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:02.217Z,1528903562.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:02.592Z,1528903562.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:02.621Z,1528903562.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:02.996Z,1528903562.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:03.015Z,1528903563.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:03.400Z,1528903563.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:03.436Z,1528903563.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:03.810Z,1528903563.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:03.835Z,1528903563.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:04.214Z,1528903564.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:04.232Z,1528903564.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:04.584Z,1528903564.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:04.620Z,1528903564.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:04.987Z,1528903564.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:05.032Z,1528903565.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:05.388Z,1528903565.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:05.434Z,1528903565.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:05.787Z,1528903565.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:05.829Z,1528903565.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:06.202Z,1528903566.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:06.236Z,1528903566.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:06.598Z,1528903566.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:06.633Z,1528903566.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:07.007Z,1528903567.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:07.037Z,1528903567.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:07.387Z,1528903567.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:07.428Z,1528903567.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:07.792Z,1528903567.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:07.813Z,1528903567.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:08.190Z,1528903568.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:08.242Z,1528903568.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:08.589Z,1528903568.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:08.609Z,1528903568.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:08.990Z,1528903568.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:09.014Z,1528903569.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:09.405Z,1528903569.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:09.443Z,1528903569.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:09.801Z,1528903569.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:09.843Z,1528903569.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:10.204Z,1528903570.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:10.246Z,1528903570.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:10.587Z,1528903570.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:10.638Z,1528903570.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:10.993Z,1528903570.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:11.016Z,1528903571.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:11.392Z,1528903571.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:11.439Z,1528903571.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:11.787Z,1528903571.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:11.820Z,1528903571.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:12.198Z,1528903572.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:12.221Z,1528903572.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:12.604Z,1528903572.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:12.622Z,1528903572.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:12.999Z,1528903572.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:13.047Z,1528903573.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:13.393Z,1528903573.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:13.418Z,1528903573.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:13.794Z,1528903573.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:13.818Z,1528903573.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:14.187Z,1528903574.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:14.216Z,1528903574.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:14.593Z,1528903574.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:14.612Z,1528903574.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:14.993Z,1528903574.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:15.011Z,1528903575.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:15.398Z,1528903575.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:15.422Z,1528903575.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:15.803Z,1528903575.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:15.824Z,1528903575.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:16.202Z,1528903576.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:16.251Z,1528903576.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:16.593Z,1528903576.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:16.616Z,1528903576.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:16.991Z,1528903576.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:17.024Z,1528903577.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:17.391Z,1528903577.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:17.424Z,1528903577.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:17.794Z,1528903577.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:17.820Z,1528903577.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:18.204Z,1528903578.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:18.223Z,1528903578.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:18.609Z,1528903578.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:18.632Z,1528903578.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:18.000Z,1528903579.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:19.022Z,1528903579.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:19.387Z,1528903579.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:19.423Z,1528903579.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:19.787Z,1528903579.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:19.828Z,1528903579.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:20.187Z,1528903580.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:20.215Z,1528903580.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:20.587Z,1528903580.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:20.621Z,1528903580.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:20.987Z,1528903580.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:21.017Z,1528903581.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:21.406Z,1528903581.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:21.440Z,1528903581.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:21.808Z,1528903581.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:21.832Z,1528903581.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:22.211Z,1528903582.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:22.232Z,1528903582.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:22.584Z,1528903582.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:22.624Z,1528903582.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:22.987Z,1528903582.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:23.024Z,1528903583.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:23.388Z,1528903583.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:23.431Z,1528903583.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:23.787Z,1528903583.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:23.827Z,1528903583.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:24.205Z,1528903584.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:24.223Z,1528903584.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:24.602Z,1528903584.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:24.644Z,1528903584.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:25.002Z,1528903585.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:25.011Z,1528903585.011 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T15:26:25.011Z,1528903585.011 [BPC1] Communications Fault, FailCount= 4
2018-06-13T15:26:25.011Z,1528903585.011 [BPC1](ERROR): Communications Fault
2018-06-13T15:26:25.042Z,1528903585.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:25.129Z,1528903585.129 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T15:26:25.388Z,1528903585.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:25.431Z,1528903585.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:25.790Z,1528903585.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:25.809Z,1528903585.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:26.190Z,1528903586.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:26.209Z,1528903586.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:26.285Z,1528903586.285 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T15:26:26.285Z,1528903586.285 [BPC1] No Fault, FailCount= 4
2018-06-13T15:26:26.592Z,1528903586.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:26.654Z,1528903586.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:26.994Z,1528903586.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:27.013Z,1528903587.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:27.399Z,1528903587.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:27.417Z,1528903587.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:27.802Z,1528903587.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:27.820Z,1528903587.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:28.203Z,1528903588.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:28.245Z,1528903588.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:28.593Z,1528903588.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:28.616Z,1528903588.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:28.991Z,1528903588.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:29.024Z,1528903589.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:29.391Z,1528903589.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:29.434Z,1528903589.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:29.793Z,1528903589.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:29.816Z,1528903589.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:30.204Z,1528903590.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:30.224Z,1528903590.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:30.608Z,1528903590.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:30.626Z,1528903590.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:31.004Z,1528903591.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:31.022Z,1528903591.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:31.387Z,1528903591.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:31.424Z,1528903591.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:31.787Z,1528903591.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:31.827Z,1528903591.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:32.187Z,1528903592.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:32.217Z,1528903592.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:32.588Z,1528903592.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:32.616Z,1528903592.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:32.983Z,1528903592.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:33.022Z,1528903593.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:33.406Z,1528903593.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:33.423Z,1528903593.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:33.812Z,1528903593.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:33.830Z,1528903593.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:34.207Z,1528903594.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:34.244Z,1528903594.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:34.587Z,1528903594.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:34.626Z,1528903594.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:34.987Z,1528903594.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:35.022Z,1528903595.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:35.388Z,1528903595.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:35.407Z,1528903595.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:35.788Z,1528903595.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:35.812Z,1528903595.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:36.203Z,1528903596.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:36.243Z,1528903596.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:36.602Z,1528903596.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:36.620Z,1528903596.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:37.003Z,1528903597.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:37.021Z,1528903597.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:37.391Z,1528903597.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:37.426Z,1528903597.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:37.786Z,1528903597.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:37.828Z,1528903597.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:38.192Z,1528903598.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:38.217Z,1528903598.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:38.591Z,1528903598.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:38.622Z,1528903598.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:38.988Z,1528903598.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:39.019Z,1528903599.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:39.399Z,1528903599.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:39.417Z,1528903599.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:39.808Z,1528903599.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:39.833Z,1528903599.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:40.208Z,1528903600.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:40.226Z,1528903600.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:40.583Z,1528903600.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:40.620Z,1528903600.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:40.987Z,1528903600.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:41.016Z,1528903601.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:41.388Z,1528903601.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:41.424Z,1528903601.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:41.787Z,1528903601.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:41.815Z,1528903601.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:42.205Z,1528903602.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:42.223Z,1528903602.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:42.609Z,1528903602.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:42.627Z,1528903602.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:43.005Z,1528903603.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:43.023Z,1528903603.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:43.387Z,1528903603.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:43.424Z,1528903603.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:43.787Z,1528903603.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:43.821Z,1528903603.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:44.183Z,1528903604.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:44.217Z,1528903604.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:44.588Z,1528903604.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:44.622Z,1528903604.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:44.987Z,1528903604.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:45.029Z,1528903605.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:45.402Z,1528903605.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:45.436Z,1528903605.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:45.803Z,1528903605.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:45.840Z,1528903605.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:46.202Z,1528903606.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:46.232Z,1528903606.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:46.583Z,1528903606.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:46.601Z,1528903606.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:46.987Z,1528903606.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:47.005Z,1528903607.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:47.388Z,1528903607.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:47.406Z,1528903607.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:47.790Z,1528903607.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:47.808Z,1528903607.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:48.202Z,1528903608.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:48.236Z,1528903608.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:48.606Z,1528903608.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:48.644Z,1528903608.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:48.998Z,1528903608.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:49.016Z,1528903609.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:49.394Z,1528903609.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:49.412Z,1528903609.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:49.798Z,1528903609.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:49.816Z,1528903609.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:52.903Z,1528903612.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:52.921Z,1528903612.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:53.054Z,1528903613.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:53.101Z,1528903613.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:53.462Z,1528903613.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:53.496Z,1528903613.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:53.857Z,1528903613.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:53.897Z,1528903613.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:54.254Z,1528903614.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:54.277Z,1528903614.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:54.654Z,1528903614.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:54.672Z,1528903614.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:55.043Z,1528903615.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:55.066Z,1528903615.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:55.447Z,1528903615.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:55.472Z,1528903615.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:55.847Z,1528903615.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:55.877Z,1528903615.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:56.259Z,1528903616.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:56.276Z,1528903616.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:56.659Z,1528903616.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:56.677Z,1528903616.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:57.059Z,1528903617.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:57.083Z,1528903617.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:57.443Z,1528903617.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:57.471Z,1528903617.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:57.847Z,1528903617.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:57.870Z,1528903617.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:58.250Z,1528903618.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:58.268Z,1528903618.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:58.650Z,1528903618.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:58.669Z,1528903618.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:59.047Z,1528903619.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:59.075Z,1528903619.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:59.460Z,1528903619.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:59.484Z,1528903619.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:26:59.860Z,1528903619.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:26:59.884Z,1528903619.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:00.260Z,1528903620.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:00.278Z,1528903620.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:00.643Z,1528903620.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:00.688Z,1528903620.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:01.043Z,1528903621.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:01.070Z,1528903621.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:01.444Z,1528903621.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:01.476Z,1528903621.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:01.843Z,1528903621.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:01.891Z,1528903621.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:02.256Z,1528903622.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:02.278Z,1528903622.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:02.663Z,1528903622.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:02.681Z,1528903622.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:03.060Z,1528903623.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:03.078Z,1528903623.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:03.444Z,1528903623.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:03.471Z,1528903623.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:03.843Z,1528903623.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:03.883Z,1528903623.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:04.243Z,1528903624.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:04.281Z,1528903624.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:04.640Z,1528903624.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:04.675Z,1528903624.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:05.043Z,1528903625.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:05.078Z,1528903625.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:05.464Z,1528903625.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:05.488Z,1528903625.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:05.863Z,1528903625.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:05.881Z,1528903625.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:06.264Z,1528903626.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:06.288Z,1528903626.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:06.643Z,1528903626.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:06.682Z,1528903626.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:07.039Z,1528903627.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:07.073Z,1528903627.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:07.444Z,1528903627.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:07.473Z,1528903627.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:07.843Z,1528903627.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:07.877Z,1528903627.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:08.258Z,1528903628.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:08.295Z,1528903628.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:08.657Z,1528903628.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:08.698Z,1528903628.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:09.057Z,1528903629.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:09.092Z,1528903629.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:09.439Z,1528903629.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:09.457Z,1528903629.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:09.847Z,1528903629.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:09.864Z,1528903629.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:10.246Z,1528903630.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:10.265Z,1528903630.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:10.647Z,1528903630.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:10.665Z,1528903630.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:11.051Z,1528903631.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:11.068Z,1528903631.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:11.461Z,1528903631.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:11.504Z,1528903631.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:11.859Z,1528903631.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:11.884Z,1528903631.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:12.258Z,1528903632.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:12.284Z,1528903632.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:12.651Z,1528903632.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:12.670Z,1528903632.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:13.051Z,1528903633.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:13.076Z,1528903633.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:13.447Z,1528903633.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:13.485Z,1528903633.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:13.843Z,1528903633.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:13.880Z,1528903633.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:14.260Z,1528903634.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:14.278Z,1528903634.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:14.664Z,1528903634.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:14.681Z,1528903634.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:15.064Z,1528903635.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:15.083Z,1528903635.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:15.443Z,1528903635.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:15.470Z,1528903635.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:15.853Z,1528903635.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:15.871Z,1528903635.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:16.243Z,1528903636.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:16.278Z,1528903636.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:16.640Z,1528903636.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:16.678Z,1528903636.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:17.043Z,1528903637.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:17.079Z,1528903637.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:17.457Z,1528903637.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:17.498Z,1528903637.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:17.854Z,1528903637.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:17.881Z,1528903637.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:18.253Z,1528903638.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:18.281Z,1528903638.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:18.643Z,1528903638.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:18.677Z,1528903638.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:19.043Z,1528903639.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:19.088Z,1528903639.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:19.447Z,1528903639.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:19.466Z,1528903639.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:19.843Z,1528903639.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:19.862Z,1528903639.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:20.250Z,1528903640.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:20.268Z,1528903640.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:20.661Z,1528903640.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:20.695Z,1528903640.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:21.058Z,1528903641.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:21.076Z,1528903641.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:21.443Z,1528903641.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:21.467Z,1528903641.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:21.848Z,1528903641.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:21.893Z,1528903641.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:22.246Z,1528903642.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:22.268Z,1528903642.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:22.647Z,1528903642.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:22.702Z,1528903642.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:23.049Z,1528903643.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:23.067Z,1528903643.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:23.456Z,1528903643.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:23.476Z,1528903643.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:23.859Z,1528903643.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:23.877Z,1528903643.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:24.258Z,1528903644.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:24.277Z,1528903644.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:24.639Z,1528903644.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:24.668Z,1528903644.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:25.039Z,1528903645.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:25.076Z,1528903645.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:25.447Z,1528903645.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:25.482Z,1528903645.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:25.839Z,1528903645.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:25.867Z,1528903645.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:26.255Z,1528903646.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:26.273Z,1528903646.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:26.664Z,1528903646.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:26.688Z,1528903646.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:27.059Z,1528903647.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:27.102Z,1528903647.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:27.443Z,1528903647.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:27.481Z,1528903647.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:27.843Z,1528903647.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:27.879Z,1528903647.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:28.243Z,1528903648.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:28.281Z,1528903648.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:28.644Z,1528903648.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:28.675Z,1528903648.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:29.043Z,1528903649.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:29.075Z,1528903649.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:29.464Z,1528903649.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:29.482Z,1528903649.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:29.860Z,1528903649.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:29.878Z,1528903649.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:30.259Z,1528903650.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:30.277Z,1528903650.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:30.643Z,1528903650.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:30.676Z,1528903650.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:31.043Z,1528903651.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:31.075Z,1528903651.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:31.444Z,1528903651.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:31.474Z,1528903651.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:31.839Z,1528903651.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:31.878Z,1528903651.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:32.260Z,1528903652.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:32.278Z,1528903652.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:32.660Z,1528903652.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:32.684Z,1528903652.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:33.062Z,1528903653.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:33.080Z,1528903653.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:33.439Z,1528903653.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:33.476Z,1528903653.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:33.843Z,1528903653.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:33.881Z,1528903653.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:34.244Z,1528903654.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:34.285Z,1528903654.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:34.644Z,1528903654.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:34.676Z,1528903654.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:35.043Z,1528903655.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:35.060Z,1528903655.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:35.456Z,1528903655.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:35.488Z,1528903655.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:35.857Z,1528903655.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:35.884Z,1528903655.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:36.254Z,1528903656.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:36.287Z,1528903656.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:36.643Z,1528903656.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:36.660Z,1528903656.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:37.047Z,1528903657.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:37.065Z,1528903657.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:37.447Z,1528903657.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:37.465Z,1528903657.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:37.846Z,1528903657.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:37.901Z,1528903657.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:38.258Z,1528903658.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:38.298Z,1528903658.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:38.657Z,1528903658.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:38.693Z,1528903658.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:39.053Z,1528903659.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:39.116Z,1528903659.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:39.448Z,1528903659.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:39.495Z,1528903659.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:39.848Z,1528903659.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:39.866Z,1528903659.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:40.249Z,1528903660.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:40.267Z,1528903660.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:40.649Z,1528903660.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:40.667Z,1528903660.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:41.050Z,1528903661.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:41.068Z,1528903661.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:41.457Z,1528903661.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:41.475Z,1528903661.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:41.857Z,1528903661.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:41.875Z,1528903661.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:42.254Z,1528903662.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:42.271Z,1528903662.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:42.648Z,1528903662.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:42.666Z,1528903662.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:43.048Z,1528903663.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:43.067Z,1528903663.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:43.448Z,1528903663.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:43.469Z,1528903663.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:43.849Z,1528903663.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:43.866Z,1528903663.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:44.254Z,1528903664.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:44.272Z,1528903664.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:44.657Z,1528903664.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:44.675Z,1528903664.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:45.057Z,1528903665.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:45.099Z,1528903665.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:45.448Z,1528903665.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:45.466Z,1528903665.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:45.849Z,1528903665.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:45.872Z,1528903665.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:46.249Z,1528903666.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:46.267Z,1528903666.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:46.649Z,1528903666.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:46.672Z,1528903666.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:47.049Z,1528903667.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:47.067Z,1528903667.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:47.457Z,1528903667.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:47.476Z,1528903667.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:47.858Z,1528903667.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:47.876Z,1528903667.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:48.254Z,1528903668.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:48.272Z,1528903668.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:48.647Z,1528903668.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:48.672Z,1528903668.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:49.049Z,1528903669.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:49.067Z,1528903669.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:49.451Z,1528903669.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:49.475Z,1528903669.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:49.494Z,1528903669.494 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T15:27:49.495Z,1528903669.495 [Default:CheckIn:C.Wait] Stopped
2018-06-13T15:27:49.495Z,1528903669.495 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T15:27:49.495Z,1528903669.495 [Default:CheckIn:D] Running Loop=1
2018-06-13T15:27:49.851Z,1528903669.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:49.907Z,1528903669.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:49.910Z,1528903669.910 [Default:CheckIn:D] Stopped
2018-06-13T15:27:49.910Z,1528903669.910 [Default:CheckIn:E] Running Loop=1
2018-06-13T15:27:50.261Z,1528903670.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:50.280Z,1528903670.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:50.299Z,1528903670.299 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 720.607747 min 
2018-06-13T15:27:50.299Z,1528903670.299 [Default:CheckIn:E] Stopped
2018-06-13T15:27:50.299Z,1528903670.299 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T15:27:50.299Z,1528903670.299 [Default:CheckIn] Stopped
2018-06-13T15:27:50.300Z,1528903670.300 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T15:27:50.300Z,1528903670.300 [Default:CheckIn](INFO): Running loop #70
2018-06-13T15:27:50.300Z,1528903670.300 [Default:CheckIn] Running Loop=70
2018-06-13T15:27:50.300Z,1528903670.300 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T15:27:50.300Z,1528903670.300 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T15:27:50.661Z,1528903670.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:50.679Z,1528903670.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:51.059Z,1528903671.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:51.077Z,1528903671.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:51.454Z,1528903671.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:51.480Z,1528903671.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:51.854Z,1528903671.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:51.879Z,1528903671.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:52.255Z,1528903672.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:52.285Z,1528903672.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:52.656Z,1528903672.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:52.674Z,1528903672.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:53.054Z,1528903673.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:53.072Z,1528903673.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:53.463Z,1528903673.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:53.484Z,1528903673.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:56.573Z,1528903676.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:56.592Z,1528903676.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:56.757Z,1528903676.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:56.778Z,1528903676.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:57.135Z,1528903677.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:57.166Z,1528903677.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:57.536Z,1528903677.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:57.566Z,1528903677.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:57.931Z,1528903677.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:57.974Z,1528903677.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:58.345Z,1528903678.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:58.379Z,1528903678.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:58.745Z,1528903678.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:58.780Z,1528903678.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:59.145Z,1528903679.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:59.173Z,1528903679.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:59.531Z,1528903679.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:59.548Z,1528903679.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:27:59.931Z,1528903679.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:27:59.950Z,1528903679.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:00.331Z,1528903680.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:00.366Z,1528903680.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:00.737Z,1528903680.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:00.760Z,1528903680.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:01.139Z,1528903681.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:01.191Z,1528903681.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:01.542Z,1528903681.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:01.560Z,1528903681.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:01.946Z,1528903681.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:01.964Z,1528903681.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:02.343Z,1528903682.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:02.360Z,1528903682.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:02.738Z,1528903682.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:02.756Z,1528903682.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:03.138Z,1528903683.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:03.156Z,1528903683.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:03.538Z,1528903683.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:03.556Z,1528903683.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:03.937Z,1528903683.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:03.955Z,1528903683.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:04.348Z,1528903684.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:04.417Z,1528903684.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:04.747Z,1528903684.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:04.799Z,1528903684.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:05.146Z,1528903685.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:05.168Z,1528903685.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:05.535Z,1528903685.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:05.558Z,1528903685.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:05.937Z,1528903685.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:05.955Z,1528903685.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:05.955Z,1528903685.955 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 240
2018-06-13T15:28:05.955Z,1528903685.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:28:05.957Z,1528903685.957 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:05.957Z,1528903685.957 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 240
2018-06-13T15:28:05.957Z,1528903685.957 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:28:05.959Z,1528903685.959 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:05.959Z,1528903685.959 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 240
2018-06-13T15:28:05.959Z,1528903685.959 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:28:06.038Z,1528903686.038 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:28:06.038Z,1528903686.038 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:28:06.038Z,1528903686.038 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:28:06.337Z,1528903686.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:06.425Z,1528903686.425 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:28:06.425Z,1528903686.425 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 240
2018-06-13T15:28:06.426Z,1528903686.426 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:28:06.426Z,1528903686.426 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 240
2018-06-13T15:28:06.426Z,1528903686.426 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:28:06.426Z,1528903686.426 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 240
2018-06-13T15:28:06.728Z,1528903686.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:06.755Z,1528903686.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:28:06.756Z,1528903686.756 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:28:06.756Z,1528903686.756 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:28:06.756Z,1528903686.756 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:28:06.757Z,1528903686.757 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:28:06.757Z,1528903686.757 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:28:06.757Z,1528903686.757 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:28:06.758Z,1528903686.758 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:28:06.758Z,1528903686.758 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:28:07.145Z,1528903687.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:07.163Z,1528903687.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:28:07.164Z,1528903687.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:07.549Z,1528903687.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:07.567Z,1528903687.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:28:07.567Z,1528903687.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:07.950Z,1528903687.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:07.971Z,1528903687.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:28:07.973Z,1528903687.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:08.338Z,1528903688.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:08.375Z,1528903688.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:28:08.376Z,1528903688.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:08.731Z,1528903688.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:08.768Z,1528903688.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:28:08.768Z,1528903688.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:09.131Z,1528903689.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:09.163Z,1528903689.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:28:09.164Z,1528903689.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:09.528Z,1528903689.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:09.562Z,1528903689.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:28:09.563Z,1528903689.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:09.927Z,1528903689.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:09.957Z,1528903689.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:28:09.958Z,1528903689.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:10.346Z,1528903690.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:10.385Z,1528903690.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:28:10.386Z,1528903690.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:10.742Z,1528903690.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:10.796Z,1528903690.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:28:10.813Z,1528903690.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:11.142Z,1528903691.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:11.169Z,1528903691.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:28:11.170Z,1528903691.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:11.531Z,1528903691.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:11.573Z,1528903691.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:28:11.574Z,1528903691.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:11.931Z,1528903691.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:11.948Z,1528903691.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:28:11.949Z,1528903691.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:12.331Z,1528903692.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:12.354Z,1528903692.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:28:12.355Z,1528903692.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:12.734Z,1528903692.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:12.788Z,1528903692.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:28:12.790Z,1528903692.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:13.134Z,1528903693.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:13.152Z,1528903693.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:28:13.153Z,1528903693.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:13.545Z,1528903693.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:13.585Z,1528903693.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:28:13.586Z,1528903693.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:13.945Z,1528903693.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:13.963Z,1528903693.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:28:13.964Z,1528903693.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:14.346Z,1528903694.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:14.364Z,1528903694.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:28:14.387Z,1528903694.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:14.736Z,1528903694.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:14.753Z,1528903694.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:28:14.754Z,1528903694.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:15.138Z,1528903695.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:15.156Z,1528903695.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:28:15.157Z,1528903695.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:15.538Z,1528903695.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:15.555Z,1528903695.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:28:15.556Z,1528903695.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:15.935Z,1528903695.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:15.957Z,1528903695.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:28:15.958Z,1528903695.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:16.345Z,1528903696.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:16.389Z,1528903696.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:28:16.390Z,1528903696.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:16.746Z,1528903696.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:16.768Z,1528903696.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:28:16.769Z,1528903696.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:17.147Z,1528903697.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:17.171Z,1528903697.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T15:28:17.172Z,1528903697.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:17.535Z,1528903697.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:17.576Z,1528903697.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T15:28:17.577Z,1528903697.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:17.937Z,1528903697.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:17.954Z,1528903697.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T15:28:17.955Z,1528903697.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:18.327Z,1528903698.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:18.363Z,1528903698.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T15:28:18.363Z,1528903698.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:18.732Z,1528903698.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:18.768Z,1528903698.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T15:28:18.769Z,1528903698.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:19.132Z,1528903699.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:19.164Z,1528903699.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T15:28:19.165Z,1528903699.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:19.552Z,1528903699.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:19.569Z,1528903699.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T15:28:19.570Z,1528903699.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:19.952Z,1528903699.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:19.970Z,1528903699.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T15:28:19.971Z,1528903699.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:20.337Z,1528903700.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:20.371Z,1528903700.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T15:28:20.372Z,1528903700.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:20.731Z,1528903700.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:20.767Z,1528903700.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T15:28:20.768Z,1528903700.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:21.131Z,1528903701.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:21.170Z,1528903701.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T15:28:21.171Z,1528903701.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:21.532Z,1528903701.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:21.563Z,1528903701.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:28:21.564Z,1528903701.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:21.931Z,1528903701.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:21.964Z,1528903701.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:28:21.965Z,1528903701.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:22.352Z,1528903702.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:22.370Z,1528903702.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T15:28:22.371Z,1528903702.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:22.752Z,1528903702.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:22.769Z,1528903702.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T15:28:22.770Z,1528903702.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:23.141Z,1528903703.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:23.176Z,1528903703.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:28:23.181Z,1528903703.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:23.531Z,1528903703.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:23.563Z,1528903703.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:28:23.564Z,1528903703.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:23.931Z,1528903703.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:23.979Z,1528903703.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:28:23.980Z,1528903703.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:24.331Z,1528903704.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:24.348Z,1528903704.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T15:28:24.349Z,1528903704.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:24.732Z,1528903704.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:24.767Z,1528903704.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T15:28:24.768Z,1528903704.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:25.130Z,1528903705.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:25.156Z,1528903705.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T15:28:25.161Z,1528903705.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:25.542Z,1528903705.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:25.559Z,1528903705.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T15:28:25.560Z,1528903705.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:25.946Z,1528903705.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:25.964Z,1528903705.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:26.342Z,1528903706.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:26.359Z,1528903706.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:26.736Z,1528903706.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:26.754Z,1528903706.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:27.137Z,1528903707.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:27.155Z,1528903707.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:27.538Z,1528903707.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:27.555Z,1528903707.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:27.935Z,1528903707.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:27.958Z,1528903707.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:28.345Z,1528903708.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:28.364Z,1528903708.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:28.745Z,1528903708.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:28.763Z,1528903708.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:29.142Z,1528903709.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:29.164Z,1528903709.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:29.538Z,1528903709.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:29.556Z,1528903709.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:29.933Z,1528903709.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:29.951Z,1528903709.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:30.337Z,1528903710.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:30.361Z,1528903710.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:30.730Z,1528903710.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:30.766Z,1528903710.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:31.137Z,1528903711.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:31.155Z,1528903711.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:31.547Z,1528903711.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:31.565Z,1528903711.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:31.947Z,1528903711.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:31.972Z,1528903711.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:32.347Z,1528903712.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:32.365Z,1528903712.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:32.736Z,1528903712.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:32.755Z,1528903712.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:33.138Z,1528903713.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:33.156Z,1528903713.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:33.528Z,1528903713.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:33.563Z,1528903713.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:33.931Z,1528903713.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:33.958Z,1528903713.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:34.352Z,1528903714.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:34.371Z,1528903714.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:34.751Z,1528903714.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:34.776Z,1528903714.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:35.147Z,1528903715.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:35.184Z,1528903715.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:35.532Z,1528903715.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:35.572Z,1528903715.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:35.931Z,1528903715.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:35.969Z,1528903715.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:36.331Z,1528903716.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:36.348Z,1528903716.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:36.736Z,1528903716.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:36.770Z,1528903716.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:37.131Z,1528903717.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:37.149Z,1528903717.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:37.542Z,1528903717.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:37.576Z,1528903717.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:37.945Z,1528903717.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:37.979Z,1528903717.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:38.346Z,1528903718.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:38.363Z,1528903718.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:38.736Z,1528903718.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:38.760Z,1528903718.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:39.138Z,1528903719.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:39.156Z,1528903719.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:39.538Z,1528903719.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:39.557Z,1528903719.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:39.935Z,1528903719.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:39.965Z,1528903719.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:40.350Z,1528903720.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:40.368Z,1528903720.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:40.746Z,1528903720.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:40.764Z,1528903720.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:41.146Z,1528903721.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:41.165Z,1528903721.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:41.538Z,1528903721.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:41.556Z,1528903721.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:41.937Z,1528903721.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:41.955Z,1528903721.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:42.338Z,1528903722.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:42.356Z,1528903722.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:42.738Z,1528903722.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:42.757Z,1528903722.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:43.131Z,1528903723.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:43.155Z,1528903723.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:43.546Z,1528903723.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:43.564Z,1528903723.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:43.947Z,1528903723.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:43.965Z,1528903723.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:44.348Z,1528903724.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:44.366Z,1528903724.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:44.735Z,1528903724.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:44.758Z,1528903724.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:45.138Z,1528903725.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:45.160Z,1528903725.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:45.531Z,1528903725.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:45.556Z,1528903725.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:45.935Z,1528903725.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:45.958Z,1528903725.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:46.349Z,1528903726.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:46.368Z,1528903726.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:46.748Z,1528903726.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:46.772Z,1528903726.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:47.147Z,1528903727.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:47.165Z,1528903727.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:47.539Z,1528903727.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:47.557Z,1528903727.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:47.931Z,1528903727.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:47.957Z,1528903727.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:48.338Z,1528903728.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:48.356Z,1528903728.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:48.735Z,1528903728.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:48.761Z,1528903728.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:49.131Z,1528903729.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:49.161Z,1528903729.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:49.551Z,1528903729.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:49.569Z,1528903729.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:49.956Z,1528903729.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:49.980Z,1528903729.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:53.065Z,1528903733.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:53.084Z,1528903733.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:53.223Z,1528903733.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:53.260Z,1528903733.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:53.614Z,1528903733.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:53.632Z,1528903733.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:54.016Z,1528903734.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:54.034Z,1528903734.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:54.425Z,1528903734.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:54.457Z,1528903734.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:54.826Z,1528903734.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:54.844Z,1528903734.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:55.227Z,1528903735.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:55.244Z,1528903735.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:55.616Z,1528903735.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:55.650Z,1528903735.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:56.018Z,1528903736.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:56.036Z,1528903736.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:56.417Z,1528903736.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:56.440Z,1528903736.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:56.815Z,1528903736.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:56.850Z,1528903736.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:57.212Z,1528903737.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:57.250Z,1528903737.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:57.627Z,1528903737.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:57.646Z,1528903737.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:58.031Z,1528903738.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:58.049Z,1528903738.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:58.431Z,1528903738.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:58.449Z,1528903738.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:58.811Z,1528903738.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:58.844Z,1528903738.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:59.212Z,1528903739.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:59.243Z,1528903739.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:28:59.612Z,1528903739.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:28:59.652Z,1528903739.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:00.011Z,1528903740.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:00.038Z,1528903740.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:00.427Z,1528903740.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:00.452Z,1528903740.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:00.832Z,1528903740.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:00.850Z,1528903740.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:01.221Z,1528903741.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:01.245Z,1528903741.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:01.611Z,1528903741.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:01.638Z,1528903741.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:02.012Z,1528903742.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:02.042Z,1528903742.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:02.407Z,1528903742.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:02.443Z,1528903742.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:02.812Z,1528903742.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:02.839Z,1528903742.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:03.211Z,1528903743.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:03.247Z,1528903743.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:03.632Z,1528903743.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:03.650Z,1528903743.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:04.032Z,1528903744.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:04.050Z,1528903744.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:04.431Z,1528903744.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:04.449Z,1528903744.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:04.811Z,1528903744.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:04.838Z,1528903744.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:05.211Z,1528903745.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:05.238Z,1528903745.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:05.607Z,1528903745.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:05.645Z,1528903745.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:06.007Z,1528903746.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:06.045Z,1528903746.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:06.427Z,1528903746.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:06.445Z,1528903746.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:06.835Z,1528903746.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:06.859Z,1528903746.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:07.221Z,1528903747.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:07.256Z,1528903747.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:07.611Z,1528903747.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:07.644Z,1528903747.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:08.011Z,1528903748.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:08.045Z,1528903748.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:08.411Z,1528903748.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:08.429Z,1528903748.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:08.816Z,1528903748.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:08.834Z,1528903748.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:09.214Z,1528903749.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:09.232Z,1528903749.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:09.625Z,1528903749.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:09.659Z,1528903749.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:10.025Z,1528903750.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:10.043Z,1528903750.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:10.425Z,1528903750.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:10.443Z,1528903750.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:10.817Z,1528903750.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:10.840Z,1528903750.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:11.216Z,1528903751.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:11.234Z,1528903751.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:11.619Z,1528903751.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:11.637Z,1528903751.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:12.017Z,1528903752.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:12.035Z,1528903752.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:12.422Z,1528903752.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:12.444Z,1528903752.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:12.825Z,1528903752.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:12.844Z,1528903752.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:13.222Z,1528903753.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:13.244Z,1528903753.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:13.618Z,1528903753.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:13.636Z,1528903753.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:14.018Z,1528903754.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:14.036Z,1528903754.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:14.417Z,1528903754.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:14.435Z,1528903754.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:14.810Z,1528903754.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:14.843Z,1528903754.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:15.215Z,1528903755.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:15.240Z,1528903755.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:15.626Z,1528903755.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:15.645Z,1528903755.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:16.026Z,1528903756.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:16.048Z,1528903756.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:16.427Z,1528903756.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:16.445Z,1528903756.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:16.816Z,1528903756.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:16.835Z,1528903756.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:17.216Z,1528903757.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:17.234Z,1528903757.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:17.618Z,1528903757.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:17.637Z,1528903757.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:18.007Z,1528903758.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:18.043Z,1528903758.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:18.432Z,1528903758.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:18.450Z,1528903758.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:18.832Z,1528903758.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:18.850Z,1528903758.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:19.227Z,1528903759.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:19.245Z,1528903759.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:19.611Z,1528903759.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:19.645Z,1528903759.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:20.011Z,1528903760.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:20.046Z,1528903760.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:20.412Z,1528903760.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:20.451Z,1528903760.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:20.812Z,1528903760.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:20.846Z,1528903760.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:21.211Z,1528903761.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:21.245Z,1528903761.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:21.621Z,1528903761.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:21.655Z,1528903761.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:22.025Z,1528903762.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:22.052Z,1528903762.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:22.426Z,1528903762.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:22.455Z,1528903762.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:22.815Z,1528903762.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:22.849Z,1528903762.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:23.211Z,1528903763.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:23.229Z,1528903763.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:23.616Z,1528903763.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:23.634Z,1528903763.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:24.013Z,1528903764.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:24.031Z,1528903764.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:24.425Z,1528903764.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:24.463Z,1528903764.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:24.826Z,1528903764.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:24.864Z,1528903764.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:25.220Z,1528903765.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:25.238Z,1528903765.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:25.615Z,1528903765.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:25.634Z,1528903765.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:26.018Z,1528903766.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:26.036Z,1528903766.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:26.416Z,1528903766.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:26.434Z,1528903766.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:26.816Z,1528903766.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:26.837Z,1528903766.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:27.216Z,1528903767.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:27.236Z,1528903767.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:27.622Z,1528903767.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:27.640Z,1528903767.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:28.025Z,1528903768.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:28.043Z,1528903768.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:28.425Z,1528903768.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:28.443Z,1528903768.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:28.811Z,1528903768.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:28.845Z,1528903768.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:29.215Z,1528903769.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:29.239Z,1528903769.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:29.619Z,1528903769.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:29.637Z,1528903769.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:30.010Z,1528903770.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:30.040Z,1528903770.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:30.428Z,1528903770.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:30.452Z,1528903770.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:30.827Z,1528903770.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:30.845Z,1528903770.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:31.226Z,1528903771.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:31.244Z,1528903771.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:31.622Z,1528903771.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:31.644Z,1528903771.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:32.015Z,1528903772.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:32.052Z,1528903772.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:32.417Z,1528903772.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:32.435Z,1528903772.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:32.819Z,1528903772.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:32.842Z,1528903772.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:33.215Z,1528903773.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:33.249Z,1528903773.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:33.628Z,1528903773.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:33.646Z,1528903773.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:34.034Z,1528903774.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:34.052Z,1528903774.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:34.433Z,1528903774.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:34.451Z,1528903774.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:34.811Z,1528903774.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:34.840Z,1528903774.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:35.211Z,1528903775.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:35.238Z,1528903775.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:35.611Z,1528903775.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:35.641Z,1528903775.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:36.007Z,1528903776.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:36.042Z,1528903776.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:36.427Z,1528903776.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:36.446Z,1528903776.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:36.832Z,1528903776.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:36.850Z,1528903776.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:37.229Z,1528903777.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:37.247Z,1528903777.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:37.611Z,1528903777.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:37.644Z,1528903777.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:38.011Z,1528903778.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:38.039Z,1528903778.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:38.411Z,1528903778.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:38.438Z,1528903778.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:38.812Z,1528903778.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:38.840Z,1528903778.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:39.211Z,1528903779.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:39.239Z,1528903779.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:39.627Z,1528903779.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:39.646Z,1528903779.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:40.031Z,1528903780.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:40.049Z,1528903780.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:40.431Z,1528903780.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:40.452Z,1528903780.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:40.811Z,1528903780.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:40.839Z,1528903780.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:41.211Z,1528903781.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:41.237Z,1528903781.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:41.612Z,1528903781.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:41.641Z,1528903781.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:42.007Z,1528903782.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:42.043Z,1528903782.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:42.427Z,1528903782.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:42.445Z,1528903782.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:42.836Z,1528903782.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:42.853Z,1528903782.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:43.226Z,1528903783.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:43.244Z,1528903783.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:43.611Z,1528903783.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:43.644Z,1528903783.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:44.011Z,1528903784.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:44.039Z,1528903784.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:44.407Z,1528903784.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:44.443Z,1528903784.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:44.812Z,1528903784.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:44.852Z,1528903784.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:45.211Z,1528903785.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:45.239Z,1528903785.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:45.627Z,1528903785.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:45.646Z,1528903785.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:46.031Z,1528903786.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:46.049Z,1528903786.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:46.431Z,1528903786.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:46.460Z,1528903786.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:46.807Z,1528903786.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:46.839Z,1528903786.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:47.211Z,1528903787.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:47.244Z,1528903787.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:47.611Z,1528903787.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:47.640Z,1528903787.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:48.011Z,1528903788.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:48.038Z,1528903788.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:48.428Z,1528903788.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:48.452Z,1528903788.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:48.827Z,1528903788.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:48.845Z,1528903788.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:49.217Z,1528903789.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:49.253Z,1528903789.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:49.611Z,1528903789.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:49.645Z,1528903789.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:50.011Z,1528903790.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:50.028Z,1528903790.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:53.143Z,1528903793.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:53.161Z,1528903793.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:53.293Z,1528903793.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:53.328Z,1528903793.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:53.688Z,1528903793.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:53.707Z,1528903793.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:54.071Z,1528903794.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:54.128Z,1528903794.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:54.467Z,1528903794.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:54.505Z,1528903794.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:54.868Z,1528903794.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:54.908Z,1528903794.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:55.267Z,1528903795.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:55.285Z,1528903795.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:55.681Z,1528903795.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:55.708Z,1528903795.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:56.081Z,1528903796.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:56.109Z,1528903796.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:56.482Z,1528903796.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:56.516Z,1528903796.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:56.871Z,1528903796.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:56.905Z,1528903796.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:57.271Z,1528903797.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:57.289Z,1528903797.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:57.672Z,1528903797.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:57.690Z,1528903797.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:58.070Z,1528903798.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:58.088Z,1528903798.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:58.477Z,1528903798.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:58.496Z,1528903798.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:58.881Z,1528903798.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:58.899Z,1528903798.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:59.282Z,1528903799.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:59.299Z,1528903799.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:29:59.673Z,1528903799.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:29:59.691Z,1528903799.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:00.072Z,1528903800.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:00.090Z,1528903800.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:00.471Z,1528903800.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:00.488Z,1528903800.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:00.871Z,1528903800.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:00.901Z,1528903800.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:01.274Z,1528903801.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:01.292Z,1528903801.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:01.678Z,1528903801.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:01.700Z,1528903801.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:02.088Z,1528903802.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:02.105Z,1528903802.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:02.483Z,1528903802.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:02.508Z,1528903802.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:02.871Z,1528903802.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:02.894Z,1528903802.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:03.263Z,1528903803.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:03.293Z,1528903803.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:03.674Z,1528903803.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:03.692Z,1528903803.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:04.077Z,1528903804.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:04.095Z,1528903804.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:04.486Z,1528903804.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:04.503Z,1528903804.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:04.886Z,1528903804.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:04.903Z,1528903804.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:05.283Z,1528903805.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:05.308Z,1528903805.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:05.671Z,1528903805.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:05.707Z,1528903805.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:06.074Z,1528903806.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:06.093Z,1528903806.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:06.473Z,1528903806.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:06.492Z,1528903806.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:06.874Z,1528903806.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:06.898Z,1528903806.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:07.277Z,1528903807.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:07.300Z,1528903807.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:07.688Z,1528903807.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:07.706Z,1528903807.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:08.089Z,1528903808.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:08.107Z,1528903808.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:08.484Z,1528903808.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:08.508Z,1528903808.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:08.878Z,1528903808.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:08.896Z,1528903808.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:09.268Z,1528903809.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:09.296Z,1528903809.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:09.663Z,1528903809.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:09.700Z,1528903809.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:10.067Z,1528903810.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:10.095Z,1528903810.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:10.488Z,1528903810.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:10.506Z,1528903810.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:10.888Z,1528903810.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:10.906Z,1528903810.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:11.283Z,1528903811.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:11.302Z,1528903811.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:11.667Z,1528903811.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:11.697Z,1528903811.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:12.067Z,1528903812.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:12.103Z,1528903812.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:12.467Z,1528903812.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:12.504Z,1528903812.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:12.868Z,1528903812.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:12.904Z,1528903812.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:13.267Z,1528903813.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:13.303Z,1528903813.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:13.686Z,1528903813.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:13.710Z,1528903813.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:14.092Z,1528903814.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:14.116Z,1528903814.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:14.488Z,1528903814.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:14.506Z,1528903814.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:14.867Z,1528903814.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:14.908Z,1528903814.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:15.268Z,1528903815.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:15.298Z,1528903815.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:15.669Z,1528903815.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:15.704Z,1528903815.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:16.067Z,1528903816.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:16.095Z,1528903816.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:16.490Z,1528903816.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:16.507Z,1528903816.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:16.884Z,1528903816.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:16.902Z,1528903816.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:17.285Z,1528903817.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:17.303Z,1528903817.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:17.668Z,1528903817.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:17.711Z,1528903817.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:18.067Z,1528903818.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:18.100Z,1528903818.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:18.467Z,1528903818.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:18.504Z,1528903818.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:18.868Z,1528903818.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:18.901Z,1528903818.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:19.263Z,1528903819.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:19.298Z,1528903819.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:19.677Z,1528903819.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:19.715Z,1528903819.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:20.089Z,1528903820.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:20.108Z,1528903820.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:20.477Z,1528903820.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:20.513Z,1528903820.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:20.867Z,1528903820.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:20.903Z,1528903820.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:21.267Z,1528903821.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:21.305Z,1528903821.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:21.668Z,1528903821.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:21.702Z,1528903821.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:22.067Z,1528903822.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:22.084Z,1528903822.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:22.481Z,1528903822.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:22.510Z,1528903822.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:22.877Z,1528903822.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:22.915Z,1528903822.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:23.282Z,1528903823.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:23.308Z,1528903823.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:23.669Z,1528903823.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:23.687Z,1528903823.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:24.071Z,1528903824.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:24.089Z,1528903824.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:24.471Z,1528903824.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:24.489Z,1528903824.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:24.870Z,1528903824.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:24.916Z,1528903824.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:25.270Z,1528903825.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:25.288Z,1528903825.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:25.681Z,1528903825.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:25.715Z,1528903825.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:26.081Z,1528903826.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:26.119Z,1528903826.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:26.478Z,1528903826.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:26.496Z,1528903826.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:26.866Z,1528903826.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:26.895Z,1528903826.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:27.274Z,1528903827.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:27.292Z,1528903827.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:27.673Z,1528903827.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:27.691Z,1528903827.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:28.073Z,1528903828.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:28.096Z,1528903828.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:28.478Z,1528903828.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:28.504Z,1528903828.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:28.881Z,1528903828.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:28.899Z,1528903828.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:29.279Z,1528903829.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:29.304Z,1528903829.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:29.674Z,1528903829.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:29.692Z,1528903829.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:30.069Z,1528903830.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:30.087Z,1528903830.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:30.478Z,1528903830.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:30.500Z,1528903830.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:30.881Z,1528903830.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:30.899Z,1528903830.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:31.278Z,1528903831.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:31.301Z,1528903831.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:31.671Z,1528903831.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:31.702Z,1528903831.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:32.068Z,1528903832.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:32.095Z,1528903832.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:32.478Z,1528903832.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:32.496Z,1528903832.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:32.881Z,1528903832.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:32.899Z,1528903832.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:33.282Z,1528903833.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:33.303Z,1528903833.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:33.666Z,1528903833.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:33.696Z,1528903833.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:34.073Z,1528903834.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:34.091Z,1528903834.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:34.482Z,1528903834.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:34.501Z,1528903834.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:34.882Z,1528903834.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:34.900Z,1528903834.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:35.282Z,1528903835.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:35.300Z,1528903835.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:35.674Z,1528903835.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:35.692Z,1528903835.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:36.067Z,1528903836.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:36.091Z,1528903836.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:36.482Z,1528903836.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:36.504Z,1528903836.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:36.883Z,1528903836.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:36.904Z,1528903836.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:37.282Z,1528903837.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:37.304Z,1528903837.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:37.671Z,1528903837.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:37.694Z,1528903837.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:38.071Z,1528903838.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:38.096Z,1528903838.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:38.479Z,1528903838.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:38.497Z,1528903838.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:38.881Z,1528903838.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:38.900Z,1528903838.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:39.283Z,1528903839.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:39.301Z,1528903839.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:39.674Z,1528903839.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:39.692Z,1528903839.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:40.071Z,1528903840.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:40.094Z,1528903840.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:40.481Z,1528903840.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:40.512Z,1528903840.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:40.884Z,1528903840.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:40.904Z,1528903840.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:41.283Z,1528903841.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:41.301Z,1528903841.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:41.664Z,1528903841.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:41.702Z,1528903841.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:42.067Z,1528903842.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:42.100Z,1528903842.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:42.483Z,1528903842.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:42.501Z,1528903842.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:42.888Z,1528903842.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:42.907Z,1528903842.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:43.274Z,1528903843.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:43.307Z,1528903843.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:43.668Z,1528903843.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:43.704Z,1528903843.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:44.067Z,1528903844.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:44.111Z,1528903844.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:44.473Z,1528903844.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:44.501Z,1528903844.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:44.886Z,1528903844.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:44.904Z,1528903844.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:45.293Z,1528903845.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:45.316Z,1528903845.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:45.664Z,1528903845.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:45.705Z,1528903845.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:46.067Z,1528903846.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:46.109Z,1528903846.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:46.486Z,1528903846.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:46.506Z,1528903846.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:46.881Z,1528903846.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:46.917Z,1528903846.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:47.282Z,1528903847.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:47.306Z,1528903847.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:47.668Z,1528903847.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:47.707Z,1528903847.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:48.063Z,1528903848.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:48.097Z,1528903848.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:48.489Z,1528903848.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:48.507Z,1528903848.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:48.889Z,1528903848.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:48.907Z,1528903848.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:49.273Z,1528903849.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:49.302Z,1528903849.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:49.671Z,1528903849.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:49.704Z,1528903849.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:50.071Z,1528903850.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:50.106Z,1528903850.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:53.194Z,1528903853.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:53.213Z,1528903853.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:53.351Z,1528903853.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:53.395Z,1528903853.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:53.750Z,1528903853.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:53.768Z,1528903853.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:54.124Z,1528903854.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:54.152Z,1528903854.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:54.527Z,1528903854.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:54.555Z,1528903854.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:54.927Z,1528903854.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:54.957Z,1528903854.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:55.323Z,1528903855.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:55.350Z,1528903855.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:55.744Z,1528903855.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:55.762Z,1528903855.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:56.148Z,1528903856.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:56.166Z,1528903856.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:56.544Z,1528903856.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:56.563Z,1528903856.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:56.927Z,1528903856.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:56.960Z,1528903856.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:57.323Z,1528903857.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:57.360Z,1528903857.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:57.720Z,1528903857.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:57.751Z,1528903857.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:58.123Z,1528903858.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:58.151Z,1528903858.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:58.546Z,1528903858.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:58.564Z,1528903858.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:58.945Z,1528903858.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:58.963Z,1528903858.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:59.348Z,1528903859.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:59.372Z,1528903859.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:30:59.727Z,1528903859.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:30:59.757Z,1528903859.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:00.124Z,1528903860.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:00.156Z,1528903860.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:00.523Z,1528903860.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:00.558Z,1528903860.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:00.925Z,1528903860.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:00.964Z,1528903860.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:01.325Z,1528903861.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:01.363Z,1528903861.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:01.734Z,1528903861.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:01.762Z,1528903861.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:02.138Z,1528903862.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:02.176Z,1528903862.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:02.530Z,1528903862.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:02.564Z,1528903862.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:02.923Z,1528903862.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:02.949Z,1528903862.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:03.323Z,1528903863.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:03.343Z,1528903863.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:03.727Z,1528903863.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:03.769Z,1528903863.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:04.126Z,1528903864.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:04.144Z,1528903864.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:04.537Z,1528903864.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:04.572Z,1528903864.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:04.937Z,1528903864.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:04.956Z,1528903864.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:05.334Z,1528903865.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:05.352Z,1528903865.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:05.728Z,1528903865.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:05.763Z,1528903865.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:06.126Z,1528903866.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:06.144Z,1528903866.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:06.534Z,1528903866.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:06.552Z,1528903866.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:06.937Z,1528903866.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:06.955Z,1528903866.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:06.956Z,1528903866.956 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 241
2018-06-13T15:31:06.956Z,1528903866.956 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:31:06.958Z,1528903866.958 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:06.958Z,1528903866.958 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 241
2018-06-13T15:31:06.958Z,1528903866.958 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:31:06.959Z,1528903866.959 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:06.960Z,1528903866.960 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 241
2018-06-13T15:31:06.960Z,1528903866.960 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:31:07.045Z,1528903867.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:31:07.045Z,1528903867.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:31:07.046Z,1528903867.046 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:31:07.336Z,1528903867.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:07.455Z,1528903867.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:31:07.456Z,1528903867.456 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 241
2018-06-13T15:31:07.457Z,1528903867.457 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:31:07.457Z,1528903867.457 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 241
2018-06-13T15:31:07.458Z,1528903867.458 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:31:07.458Z,1528903867.458 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 241
2018-06-13T15:31:07.718Z,1528903867.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:07.751Z,1528903867.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:31:07.752Z,1528903867.752 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:31:07.752Z,1528903867.752 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:31:07.757Z,1528903867.757 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:31:07.757Z,1528903867.757 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:31:07.757Z,1528903867.757 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:31:07.758Z,1528903867.758 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:31:07.758Z,1528903867.758 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:31:07.759Z,1528903867.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:31:08.124Z,1528903868.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:08.155Z,1528903868.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:31:08.155Z,1528903868.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:08.534Z,1528903868.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:08.568Z,1528903868.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:31:08.569Z,1528903868.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:08.944Z,1528903868.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:08.961Z,1528903868.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:31:08.962Z,1528903868.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:09.344Z,1528903869.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:09.362Z,1528903869.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:31:09.363Z,1528903869.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:09.720Z,1528903869.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:09.749Z,1528903869.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:31:09.754Z,1528903869.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:10.123Z,1528903870.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:10.157Z,1528903870.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:31:10.158Z,1528903870.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:10.537Z,1528903870.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:10.566Z,1528903870.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:31:10.567Z,1528903870.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:10.933Z,1528903870.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:10.967Z,1528903870.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:31:10.968Z,1528903870.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:11.333Z,1528903871.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:11.367Z,1528903871.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:31:11.368Z,1528903871.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:11.724Z,1528903871.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:11.742Z,1528903871.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:31:11.743Z,1528903871.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:12.123Z,1528903872.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:12.140Z,1528903872.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:31:12.141Z,1528903872.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:12.537Z,1528903872.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:12.571Z,1528903872.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:31:12.572Z,1528903872.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:12.941Z,1528903872.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:12.970Z,1528903872.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:31:12.971Z,1528903872.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:13.337Z,1528903873.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:13.375Z,1528903873.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:31:13.376Z,1528903873.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:13.727Z,1528903873.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:13.744Z,1528903873.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:31:13.745Z,1528903873.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:14.126Z,1528903874.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:14.144Z,1528903874.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:31:14.145Z,1528903874.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:14.530Z,1528903874.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:14.547Z,1528903874.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:31:14.548Z,1528903874.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:14.938Z,1528903874.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:14.955Z,1528903874.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:31:14.956Z,1528903874.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:15.337Z,1528903875.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:15.355Z,1528903875.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:31:15.356Z,1528903875.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:15.730Z,1528903875.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:15.747Z,1528903875.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:31:15.748Z,1528903875.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:16.129Z,1528903876.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:16.146Z,1528903876.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:31:16.147Z,1528903876.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:16.537Z,1528903876.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:16.555Z,1528903876.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:31:16.556Z,1528903876.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:16.934Z,1528903876.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:16.956Z,1528903876.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:31:16.958Z,1528903876.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:17.334Z,1528903877.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:17.356Z,1528903877.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:31:17.357Z,1528903877.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:17.731Z,1528903877.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:17.749Z,1528903877.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:31:17.750Z,1528903877.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:18.129Z,1528903878.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:18.152Z,1528903878.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T15:31:18.153Z,1528903878.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:18.534Z,1528903878.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:18.556Z,1528903878.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T15:31:18.557Z,1528903878.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:18.937Z,1528903878.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:18.955Z,1528903878.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T15:31:18.956Z,1528903878.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:19.332Z,1528903879.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:19.375Z,1528903879.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T15:31:19.375Z,1528903879.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:19.727Z,1528903879.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:19.756Z,1528903879.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T15:31:19.757Z,1528903879.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:20.130Z,1528903880.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:20.147Z,1528903880.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T15:31:20.148Z,1528903880.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:20.534Z,1528903880.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:20.560Z,1528903880.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T15:31:20.561Z,1528903880.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:20.937Z,1528903880.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:20.955Z,1528903880.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T15:31:20.956Z,1528903880.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:21.338Z,1528903881.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:21.355Z,1528903881.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T15:31:21.356Z,1528903881.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:21.723Z,1528903881.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:21.746Z,1528903881.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T15:31:21.747Z,1528903881.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:22.127Z,1528903882.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:22.152Z,1528903882.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T15:31:22.153Z,1528903882.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:22.538Z,1528903882.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:22.555Z,1528903882.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:31:22.556Z,1528903882.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:22.937Z,1528903882.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:22.955Z,1528903882.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:31:22.956Z,1528903882.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:23.338Z,1528903883.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:23.355Z,1528903883.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T15:31:23.356Z,1528903883.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:23.731Z,1528903883.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:23.748Z,1528903883.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T15:31:23.750Z,1528903883.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:24.123Z,1528903884.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:24.146Z,1528903884.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:31:24.146Z,1528903884.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:24.535Z,1528903884.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:24.552Z,1528903884.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:31:24.553Z,1528903884.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:24.937Z,1528903884.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:24.955Z,1528903884.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:31:24.956Z,1528903884.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:25.334Z,1528903885.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:25.356Z,1528903885.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T15:31:25.357Z,1528903885.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:25.730Z,1528903885.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:25.747Z,1528903885.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T15:31:25.748Z,1528903885.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:26.127Z,1528903886.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:26.157Z,1528903886.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T15:31:26.158Z,1528903886.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:26.502Z,1528903886.502 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T15:31:26.503Z,1528903886.503 [NAL9602] Data Fault, FailCount= 1
2018-06-13T15:31:26.503Z,1528903886.503 [NAL9602](ERROR): Data Fault
2018-06-13T15:31:26.534Z,1528903886.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:26.559Z,1528903886.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T15:31:26.559Z,1528903886.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:26.641Z,1528903886.641 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T15:31:26.902Z,1528903886.902 [NAL9602](INFO): Powering down
2018-06-13T15:31:26.926Z,1528903886.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:26.956Z,1528903886.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:27.327Z,1528903887.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:27.355Z,1528903887.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:27.723Z,1528903887.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:27.750Z,1528903887.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:27.837Z,1528903887.837 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T15:31:27.837Z,1528903887.837 [NAL9602] No Fault, FailCount= 1
2018-06-13T15:31:28.119Z,1528903888.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:28.155Z,1528903888.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:28.523Z,1528903888.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:28.551Z,1528903888.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:28.926Z,1528903888.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:28.954Z,1528903888.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:29.324Z,1528903889.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:29.352Z,1528903889.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:29.723Z,1528903889.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:29.752Z,1528903889.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:30.123Z,1528903890.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:30.150Z,1528903890.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:30.523Z,1528903890.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:30.551Z,1528903890.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:30.923Z,1528903890.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:30.960Z,1528903890.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:31.322Z,1528903891.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:31.366Z,1528903891.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:31.723Z,1528903891.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:31.750Z,1528903891.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:32.123Z,1528903892.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:32.152Z,1528903892.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:32.522Z,1528903892.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:32.550Z,1528903892.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:32.923Z,1528903892.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:32.950Z,1528903892.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:33.323Z,1528903893.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:33.352Z,1528903893.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:33.722Z,1528903893.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:33.750Z,1528903893.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:34.124Z,1528903894.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:34.151Z,1528903894.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:34.523Z,1528903894.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:34.551Z,1528903894.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:34.922Z,1528903894.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:34.950Z,1528903894.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:35.323Z,1528903895.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:35.350Z,1528903895.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:35.723Z,1528903895.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:35.751Z,1528903895.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:36.123Z,1528903896.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:36.151Z,1528903896.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:36.523Z,1528903896.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:36.550Z,1528903896.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:36.923Z,1528903896.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:36.951Z,1528903896.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:37.322Z,1528903897.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:37.350Z,1528903897.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:37.723Z,1528903897.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:37.750Z,1528903897.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:38.123Z,1528903898.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:38.152Z,1528903898.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:38.519Z,1528903898.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:38.555Z,1528903898.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:38.923Z,1528903898.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:38.951Z,1528903898.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:39.327Z,1528903899.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:39.355Z,1528903899.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:39.719Z,1528903899.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:39.759Z,1528903899.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:40.123Z,1528903900.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:40.154Z,1528903900.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:40.518Z,1528903900.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:40.536Z,1528903900.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:40.919Z,1528903900.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:40.944Z,1528903900.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:41.328Z,1528903901.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:41.346Z,1528903901.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:41.722Z,1528903901.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:41.740Z,1528903901.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:42.121Z,1528903902.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:42.140Z,1528903902.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:42.526Z,1528903902.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:42.544Z,1528903902.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:42.921Z,1528903902.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:42.940Z,1528903902.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:43.325Z,1528903903.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:43.343Z,1528903903.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:43.726Z,1528903903.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:43.744Z,1528903903.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:44.121Z,1528903904.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:44.139Z,1528903904.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:44.523Z,1528903904.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:44.541Z,1528903904.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:44.926Z,1528903904.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:44.944Z,1528903904.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:45.323Z,1528903905.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:45.341Z,1528903905.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:45.724Z,1528903905.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:45.742Z,1528903905.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:46.126Z,1528903906.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:46.143Z,1528903906.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:46.524Z,1528903906.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:46.541Z,1528903906.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:46.924Z,1528903906.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:46.942Z,1528903906.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:47.326Z,1528903907.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:47.344Z,1528903907.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:47.724Z,1528903907.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:47.742Z,1528903907.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:48.123Z,1528903908.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:48.142Z,1528903908.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:48.526Z,1528903908.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:48.544Z,1528903908.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:48.925Z,1528903908.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:48.943Z,1528903908.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:49.323Z,1528903909.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:49.342Z,1528903909.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:49.730Z,1528903909.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:49.748Z,1528903909.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:50.126Z,1528903910.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:50.143Z,1528903910.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:53.236Z,1528903913.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:53.271Z,1528903913.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:53.394Z,1528903913.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:53.432Z,1528903913.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:53.795Z,1528903913.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:53.828Z,1528903913.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:54.191Z,1528903914.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:54.218Z,1528903914.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:54.590Z,1528903914.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:54.632Z,1528903914.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:54.990Z,1528903914.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:55.008Z,1528903915.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:55.390Z,1528903915.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:55.409Z,1528903915.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:55.794Z,1528903915.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:55.836Z,1528903915.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:56.189Z,1528903916.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:56.207Z,1528903916.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:56.590Z,1528903916.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:56.608Z,1528903916.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:56.977Z,1528903916.977 [NAL9602](INFO): Powering up NAL9602
2018-06-13T15:31:56.994Z,1528903916.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:57.020Z,1528903917.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:57.391Z,1528903917.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:57.416Z,1528903917.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:57.791Z,1528903917.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:57.810Z,1528903917.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:58.194Z,1528903918.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:58.212Z,1528903918.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:58.594Z,1528903918.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:58.620Z,1528903918.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:58.992Z,1528903918.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:59.011Z,1528903919.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:59.394Z,1528903919.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:59.412Z,1528903919.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:31:59.793Z,1528903919.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:31:59.811Z,1528903919.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:00.193Z,1528903920.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:00.212Z,1528903920.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:00.594Z,1528903920.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:00.620Z,1528903920.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:00.991Z,1528903920.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:01.016Z,1528903921.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:01.393Z,1528903921.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:01.412Z,1528903921.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:01.794Z,1528903921.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:01.812Z,1528903921.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:02.191Z,1528903922.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:02.210Z,1528903922.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:02.593Z,1528903922.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:02.612Z,1528903922.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:02.994Z,1528903922.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:03.012Z,1528903923.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:03.393Z,1528903923.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:03.411Z,1528903923.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:03.793Z,1528903923.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:03.812Z,1528903923.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:04.193Z,1528903924.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:04.212Z,1528903924.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:04.591Z,1528903924.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:04.609Z,1528903924.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:04.993Z,1528903924.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:05.012Z,1528903925.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:05.394Z,1528903925.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:05.413Z,1528903925.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:05.791Z,1528903925.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:05.809Z,1528903925.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:06.194Z,1528903926.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:06.212Z,1528903926.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:06.596Z,1528903926.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:06.615Z,1528903926.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:06.992Z,1528903926.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:07.016Z,1528903927.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:07.396Z,1528903927.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:07.416Z,1528903927.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:07.802Z,1528903927.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:07.820Z,1528903927.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:08.170Z,1528903928.170 [NAL9602](INFO): NAL9602 initialized
2018-06-13T15:32:08.195Z,1528903928.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:08.226Z,1528903928.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:08.597Z,1528903928.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:08.615Z,1528903928.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:09.007Z,1528903929.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:09.025Z,1528903929.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:09.406Z,1528903929.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:09.425Z,1528903929.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:09.807Z,1528903929.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:09.825Z,1528903929.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:10.196Z,1528903930.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:10.224Z,1528903930.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:10.587Z,1528903930.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:10.624Z,1528903930.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:10.993Z,1528903930.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:11.019Z,1528903931.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:11.395Z,1528903931.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:11.433Z,1528903931.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:11.804Z,1528903931.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:11.822Z,1528903931.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:12.212Z,1528903932.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:12.236Z,1528903932.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:12.613Z,1528903932.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:12.631Z,1528903932.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:12.987Z,1528903932.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:13.028Z,1528903933.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:13.391Z,1528903933.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:13.423Z,1528903933.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:13.791Z,1528903933.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:13.821Z,1528903933.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:14.187Z,1528903934.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:14.218Z,1528903934.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:14.587Z,1528903934.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:14.616Z,1528903934.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:15.012Z,1528903935.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:15.036Z,1528903935.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:15.409Z,1528903935.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:15.427Z,1528903935.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:15.809Z,1528903935.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:15.827Z,1528903935.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:16.192Z,1528903936.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:16.222Z,1528903936.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:16.587Z,1528903936.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:16.624Z,1528903936.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:16.992Z,1528903936.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:17.022Z,1528903937.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:17.391Z,1528903937.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:17.420Z,1528903937.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:17.806Z,1528903937.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:17.824Z,1528903937.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:18.209Z,1528903938.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:18.227Z,1528903938.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:18.614Z,1528903938.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:18.636Z,1528903938.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:18.987Z,1528903938.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:19.017Z,1528903939.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:19.391Z,1528903939.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:19.419Z,1528903939.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:19.803Z,1528903939.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:19.822Z,1528903939.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:20.188Z,1528903940.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:20.217Z,1528903940.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:20.591Z,1528903940.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:20.620Z,1528903940.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:21.013Z,1528903941.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:21.037Z,1528903941.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:21.410Z,1528903941.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:21.428Z,1528903941.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:21.810Z,1528903941.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:21.828Z,1528903941.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:22.191Z,1528903942.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:22.222Z,1528903942.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:22.591Z,1528903942.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:22.631Z,1528903942.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:22.992Z,1528903942.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:23.020Z,1528903943.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:23.403Z,1528903943.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:23.421Z,1528903943.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:23.806Z,1528903943.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:23.825Z,1528903943.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:24.211Z,1528903944.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:24.231Z,1528903944.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:24.613Z,1528903944.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:24.631Z,1528903944.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:24.988Z,1528903944.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:25.026Z,1528903945.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:25.387Z,1528903945.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:25.424Z,1528903945.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:25.791Z,1528903945.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:25.822Z,1528903945.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:26.192Z,1528903946.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:26.222Z,1528903946.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:26.587Z,1528903946.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:26.627Z,1528903946.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:27.014Z,1528903947.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:27.036Z,1528903947.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:27.413Z,1528903947.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:27.436Z,1528903947.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:27.808Z,1528903947.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:27.827Z,1528903947.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:28.191Z,1528903948.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:28.221Z,1528903948.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:28.591Z,1528903948.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:28.625Z,1528903948.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:28.987Z,1528903948.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:29.016Z,1528903949.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:29.391Z,1528903949.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:29.420Z,1528903949.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:29.808Z,1528903949.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:29.827Z,1528903949.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:30.211Z,1528903950.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:30.230Z,1528903950.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:30.613Z,1528903950.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:30.636Z,1528903950.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:30.987Z,1528903950.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:31.016Z,1528903951.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:31.387Z,1528903951.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:31.416Z,1528903951.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:31.791Z,1528903951.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:31.820Z,1528903951.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:32.192Z,1528903952.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:32.220Z,1528903952.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:32.587Z,1528903952.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:32.615Z,1528903952.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:33.013Z,1528903953.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:33.036Z,1528903953.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:33.410Z,1528903953.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:33.428Z,1528903953.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:33.804Z,1528903953.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:33.822Z,1528903953.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:34.191Z,1528903954.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:34.221Z,1528903954.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:34.591Z,1528903954.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:34.620Z,1528903954.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:34.987Z,1528903954.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:35.015Z,1528903955.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:35.391Z,1528903955.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:35.421Z,1528903955.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:35.808Z,1528903955.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:35.827Z,1528903955.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:36.208Z,1528903956.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:36.226Z,1528903956.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:36.613Z,1528903956.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:36.636Z,1528903956.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:36.991Z,1528903956.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:37.020Z,1528903957.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:37.387Z,1528903957.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:37.423Z,1528903957.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:37.791Z,1528903957.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:37.820Z,1528903957.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:38.192Z,1528903958.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:38.219Z,1528903958.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:38.591Z,1528903958.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:38.627Z,1528903958.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:39.013Z,1528903959.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:39.036Z,1528903959.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:39.412Z,1528903959.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:39.430Z,1528903959.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:39.801Z,1528903959.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:39.826Z,1528903959.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:40.191Z,1528903960.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:40.222Z,1528903960.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:40.591Z,1528903960.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:40.620Z,1528903960.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:40.987Z,1528903960.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:41.016Z,1528903961.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:41.391Z,1528903961.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:41.420Z,1528903961.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:41.808Z,1528903961.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:41.826Z,1528903961.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:42.208Z,1528903962.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:42.227Z,1528903962.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:42.613Z,1528903962.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:42.636Z,1528903962.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:42.991Z,1528903962.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:43.021Z,1528903963.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:43.387Z,1528903963.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:43.423Z,1528903963.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:43.791Z,1528903963.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:43.821Z,1528903963.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:44.192Z,1528903964.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:44.222Z,1528903964.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:44.587Z,1528903964.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:44.625Z,1528903964.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:45.014Z,1528903965.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:45.040Z,1528903965.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:45.408Z,1528903965.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:45.427Z,1528903965.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:45.805Z,1528903965.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:45.823Z,1528903965.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:46.191Z,1528903966.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:46.226Z,1528903966.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:46.591Z,1528903966.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:46.628Z,1528903966.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:46.987Z,1528903966.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:47.024Z,1528903967.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:47.391Z,1528903967.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:47.432Z,1528903967.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:47.806Z,1528903967.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:47.836Z,1528903967.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:48.206Z,1528903968.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:48.239Z,1528903968.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:48.606Z,1528903968.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:48.644Z,1528903968.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:48.991Z,1528903968.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:49.034Z,1528903969.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:49.387Z,1528903969.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:49.405Z,1528903969.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:49.792Z,1528903969.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:49.811Z,1528903969.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:50.192Z,1528903970.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:50.210Z,1528903970.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:53.311Z,1528903973.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:53.342Z,1528903973.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:53.345Z,1528903973.345 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T15:27:50.3Z
2018-06-13T15:32:53.345Z,1528903973.345 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T15:32:53.345Z,1528903973.345 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T15:32:53.465Z,1528903973.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:53.504Z,1528903973.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:54.634Z,1528903974.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:54.662Z,1528903974.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:54.810Z,1528903974.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:54.859Z,1528903974.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:55.193Z,1528903975.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:55.228Z,1528903975.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:55.595Z,1528903975.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:55.612Z,1528903975.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:58.702Z,1528903978.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:58.720Z,1528903978.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:58.816Z,1528903978.816 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0280.lzma
2018-06-13T15:32:58.837Z,1528903978.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:58.898Z,1528903978.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:59.260Z,1528903979.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:59.279Z,1528903979.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:32:59.614Z,1528903979.614 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0280.lzma.bak
2018-06-13T15:32:59.614Z,1528903979.614 [DataOverHttps](INFO): SBD MOMSN=8329461
2018-06-13T15:32:59.670Z,1528903979.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:32:59.708Z,1528903979.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:01.592Z,1528903981.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:01.619Z,1528903981.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:01.731Z,1528903981.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:01.772Z,1528903981.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:02.139Z,1528903982.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:02.166Z,1528903982.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:02.539Z,1528903982.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:02.568Z,1528903982.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:02.948Z,1528903982.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:02.966Z,1528903982.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:06.081Z,1528903986.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:06.122Z,1528903986.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:06.238Z,1528903986.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:06.274Z,1528903986.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:06.652Z,1528903986.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:06.669Z,1528903986.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:07.053Z,1528903987.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:07.071Z,1528903987.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:07.428Z,1528903987.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:07.458Z,1528903987.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:07.832Z,1528903987.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:07.876Z,1528903987.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:08.234Z,1528903988.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:08.275Z,1528903988.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:08.631Z,1528903988.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:08.669Z,1528903988.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:09.042Z,1528903989.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:09.078Z,1528903989.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:09.453Z,1528903989.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:09.471Z,1528903989.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:09.841Z,1528903989.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:09.880Z,1528903989.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:10.228Z,1528903990.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:10.267Z,1528903990.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:10.635Z,1528903990.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:10.652Z,1528903990.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:11.031Z,1528903991.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:11.050Z,1528903991.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:11.434Z,1528903991.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:11.452Z,1528903991.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:15.997Z,1528903995.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:16.040Z,1528903996.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:16.130Z,1528903996.130 [DataOverHttps](INFO): Sending 326 bytes from file Logs/20180613T032335/Express0281.lzma
2018-06-13T15:33:16.171Z,1528903996.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:16.223Z,1528903996.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:16.571Z,1528903996.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:16.589Z,1528903996.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:16.931Z,1528903996.931 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0281.lzma.bak
2018-06-13T15:33:16.934Z,1528903996.934 [DataOverHttps](INFO): SBD MOMSN=8329463
2018-06-13T15:33:16.980Z,1528903996.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:16.999Z,1528903996.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:18.854Z,1528903998.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:18.885Z,1528903998.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:18.888Z,1528903998.888 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T15:33:18.888Z,1528903998.888 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T15:33:18.888Z,1528903998.888 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T15:33:19.010Z,1528903999.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:19.052Z,1528903999.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:19.421Z,1528903999.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:19.444Z,1528903999.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:19.806Z,1528903999.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:19.844Z,1528903999.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:20.199Z,1528904000.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:20.237Z,1528904000.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:23.339Z,1528904003.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:23.358Z,1528904003.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:23.493Z,1528904003.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:23.543Z,1528904003.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:23.920Z,1528904003.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:23.944Z,1528904003.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:24.320Z,1528904004.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:24.344Z,1528904004.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:24.701Z,1528904004.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:24.740Z,1528904004.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:25.095Z,1528904005.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:25.112Z,1528904005.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:25.495Z,1528904005.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:25.513Z,1528904005.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:25.895Z,1528904005.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:25.920Z,1528904005.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:26.297Z,1528904006.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:26.315Z,1528904006.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:26.698Z,1528904006.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:26.716Z,1528904006.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:27.109Z,1528904007.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:27.147Z,1528904007.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:27.509Z,1528904007.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:27.527Z,1528904007.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:27.910Z,1528904007.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:27.951Z,1528904007.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:28.301Z,1528904008.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:28.319Z,1528904008.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:28.700Z,1528904008.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:28.718Z,1528904008.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:29.100Z,1528904009.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:29.126Z,1528904009.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:29.501Z,1528904009.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:29.518Z,1528904009.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:29.906Z,1528904009.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:29.932Z,1528904009.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:30.309Z,1528904010.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:30.327Z,1528904010.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:30.706Z,1528904010.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:30.724Z,1528904010.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:31.099Z,1528904011.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:31.121Z,1528904011.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:31.498Z,1528904011.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:31.520Z,1528904011.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:31.894Z,1528904011.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:31.920Z,1528904011.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:32.299Z,1528904012.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:32.322Z,1528904012.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:32.699Z,1528904012.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:32.724Z,1528904012.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:33.109Z,1528904013.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:33.132Z,1528904013.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:33.510Z,1528904013.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:33.532Z,1528904013.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:33.910Z,1528904013.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:33.929Z,1528904013.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:34.295Z,1528904014.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:34.318Z,1528904014.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:34.699Z,1528904014.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:34.723Z,1528904014.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:35.099Z,1528904015.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:35.116Z,1528904015.116 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T15:33:35.116Z,1528904015.116 [BPC1] Communications Fault, FailCount= 5
2018-06-13T15:33:35.116Z,1528904015.116 [BPC1](ERROR): Communications Fault
2018-06-13T15:33:35.126Z,1528904015.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:35.201Z,1528904015.201 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T15:33:35.491Z,1528904015.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:35.527Z,1528904015.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:35.911Z,1528904015.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:35.928Z,1528904015.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:36.315Z,1528904016.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:36.340Z,1528904016.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:36.437Z,1528904016.437 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T15:33:36.437Z,1528904016.437 [BPC1] No Fault, FailCount= 5
2018-06-13T15:33:36.706Z,1528904016.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:36.780Z,1528904016.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:37.099Z,1528904017.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:37.122Z,1528904017.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:37.503Z,1528904017.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:37.521Z,1528904017.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:37.891Z,1528904017.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:37.927Z,1528904017.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:38.300Z,1528904018.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:38.325Z,1528904018.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:38.699Z,1528904018.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:38.724Z,1528904018.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:39.107Z,1528904019.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:39.125Z,1528904019.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:39.514Z,1528904019.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:39.531Z,1528904019.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:39.915Z,1528904019.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:39.933Z,1528904019.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:40.291Z,1528904020.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:40.327Z,1528904020.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:40.701Z,1528904020.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:40.719Z,1528904020.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:41.103Z,1528904021.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:41.122Z,1528904021.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:41.503Z,1528904021.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:41.522Z,1528904021.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:41.911Z,1528904021.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:41.929Z,1528904021.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:42.315Z,1528904022.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:42.334Z,1528904022.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:42.714Z,1528904022.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:42.732Z,1528904022.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:43.106Z,1528904023.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:43.124Z,1528904023.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:43.499Z,1528904023.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:43.525Z,1528904023.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:43.891Z,1528904023.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:43.928Z,1528904023.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:44.300Z,1528904024.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:44.326Z,1528904024.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:44.699Z,1528904024.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:44.725Z,1528904024.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:45.109Z,1528904025.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:45.127Z,1528904025.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:45.514Z,1528904025.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:45.532Z,1528904025.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:45.916Z,1528904025.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:45.934Z,1528904025.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:46.301Z,1528904026.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:46.324Z,1528904026.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:46.699Z,1528904026.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:46.723Z,1528904026.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:47.099Z,1528904027.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:47.126Z,1528904027.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:47.491Z,1528904027.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:47.528Z,1528904027.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:47.910Z,1528904027.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:47.929Z,1528904027.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:48.315Z,1528904028.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:48.334Z,1528904028.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:48.707Z,1528904028.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:48.725Z,1528904028.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:49.099Z,1528904029.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:49.134Z,1528904029.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:49.495Z,1528904029.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:49.534Z,1528904029.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:49.895Z,1528904029.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:49.922Z,1528904029.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:50.296Z,1528904030.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:50.323Z,1528904030.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:50.695Z,1528904030.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:50.724Z,1528904030.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:51.114Z,1528904031.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:51.131Z,1528904031.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:51.516Z,1528904031.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:51.570Z,1528904031.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:51.913Z,1528904031.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:51.970Z,1528904031.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:52.295Z,1528904032.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:52.450Z,1528904032.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:52.692Z,1528904032.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:52.731Z,1528904032.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:53.121Z,1528904033.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:53.262Z,1528904033.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:53.498Z,1528904033.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:53.516Z,1528904033.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:53.910Z,1528904033.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:53.928Z,1528904033.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:54.310Z,1528904034.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:54.332Z,1528904034.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:54.706Z,1528904034.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:54.735Z,1528904034.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:55.095Z,1528904035.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:55.133Z,1528904035.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:55.495Z,1528904035.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:55.514Z,1528904035.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:55.894Z,1528904035.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:55.937Z,1528904035.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:56.298Z,1528904036.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:56.320Z,1528904036.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:56.698Z,1528904036.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:56.716Z,1528904036.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:57.105Z,1528904037.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:57.123Z,1528904037.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:57.508Z,1528904037.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:57.548Z,1528904037.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:57.909Z,1528904037.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:57.932Z,1528904037.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:58.297Z,1528904038.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:58.315Z,1528904038.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:58.704Z,1528904038.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:58.722Z,1528904038.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:59.102Z,1528904039.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:59.120Z,1528904039.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:59.495Z,1528904039.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:59.518Z,1528904039.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:33:59.906Z,1528904039.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:33:59.928Z,1528904039.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:00.310Z,1528904040.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:00.336Z,1528904040.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:00.712Z,1528904040.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:00.729Z,1528904040.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:01.099Z,1528904041.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:01.121Z,1528904041.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:01.499Z,1528904041.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:01.524Z,1528904041.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:01.895Z,1528904041.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:01.918Z,1528904041.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:02.299Z,1528904042.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:02.322Z,1528904042.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:02.699Z,1528904042.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:02.725Z,1528904042.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:03.107Z,1528904043.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:03.124Z,1528904043.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:03.510Z,1528904043.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:03.532Z,1528904043.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:03.911Z,1528904043.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:03.928Z,1528904043.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:04.295Z,1528904044.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:04.318Z,1528904044.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:04.700Z,1528904044.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:04.718Z,1528904044.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:05.102Z,1528904045.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:05.131Z,1528904045.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:05.498Z,1528904045.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:05.515Z,1528904045.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:05.910Z,1528904045.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:05.932Z,1528904045.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:06.310Z,1528904046.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:06.328Z,1528904046.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:06.707Z,1528904046.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:06.725Z,1528904046.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:07.099Z,1528904047.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:07.121Z,1528904047.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:07.502Z,1528904047.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:07.525Z,1528904047.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:07.895Z,1528904047.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:07.918Z,1528904047.918 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:07.918Z,1528904047.918 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 242
2018-06-13T15:34:07.918Z,1528904047.918 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:34:07.920Z,1528904047.920 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:07.920Z,1528904047.920 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 242
2018-06-13T15:34:07.920Z,1528904047.920 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:34:07.922Z,1528904047.922 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:07.922Z,1528904047.922 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 242
2018-06-13T15:34:07.922Z,1528904047.922 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:34:08.002Z,1528904048.002 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:34:08.002Z,1528904048.002 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:34:08.002Z,1528904048.002 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:34:08.310Z,1528904048.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:08.401Z,1528904048.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:34:08.401Z,1528904048.401 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 242
2018-06-13T15:34:08.402Z,1528904048.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:34:08.402Z,1528904048.402 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 242
2018-06-13T15:34:08.402Z,1528904048.402 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:34:08.402Z,1528904048.402 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 242
2018-06-13T15:34:08.695Z,1528904048.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:08.724Z,1528904048.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:34:08.729Z,1528904048.729 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:34:08.729Z,1528904048.729 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:34:08.730Z,1528904048.730 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:34:08.730Z,1528904048.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:34:08.730Z,1528904048.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:34:08.731Z,1528904048.731 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:34:08.731Z,1528904048.731 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:34:08.731Z,1528904048.731 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:34:09.101Z,1528904049.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:09.137Z,1528904049.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:34:09.138Z,1528904049.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:09.516Z,1528904049.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:09.533Z,1528904049.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:34:09.534Z,1528904049.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:09.912Z,1528904049.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:09.930Z,1528904049.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:34:09.931Z,1528904049.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:10.299Z,1528904050.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:10.326Z,1528904050.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:34:10.327Z,1528904050.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:10.695Z,1528904050.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:10.726Z,1528904050.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:34:10.727Z,1528904050.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:11.091Z,1528904051.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:11.132Z,1528904051.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:34:11.133Z,1528904051.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:11.495Z,1528904051.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:11.528Z,1528904051.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:34:11.534Z,1528904051.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:11.905Z,1528904051.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:11.932Z,1528904051.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:34:11.933Z,1528904051.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:12.309Z,1528904052.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:12.338Z,1528904052.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:34:12.339Z,1528904052.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:12.705Z,1528904052.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:12.732Z,1528904052.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:34:12.733Z,1528904052.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:13.095Z,1528904053.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:13.112Z,1528904053.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:34:13.129Z,1528904053.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:13.495Z,1528904053.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:13.513Z,1528904053.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:34:13.514Z,1528904053.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:13.894Z,1528904053.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:13.911Z,1528904053.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:34:13.912Z,1528904053.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:14.296Z,1528904054.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:14.330Z,1528904054.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:34:14.331Z,1528904054.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:14.698Z,1528904054.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:14.716Z,1528904054.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:34:14.716Z,1528904054.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:15.109Z,1528904055.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:15.147Z,1528904055.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:34:15.148Z,1528904055.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:15.509Z,1528904055.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:15.526Z,1528904055.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:34:15.527Z,1528904055.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:15.909Z,1528904055.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:15.927Z,1528904055.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:34:15.928Z,1528904055.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:16.295Z,1528904056.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:16.317Z,1528904056.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:34:16.318Z,1528904056.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:16.699Z,1528904056.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:16.720Z,1528904056.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:34:16.722Z,1528904056.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:17.100Z,1528904057.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:17.126Z,1528904057.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:34:17.127Z,1528904057.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:17.495Z,1528904057.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:17.517Z,1528904057.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:34:17.518Z,1528904057.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:17.906Z,1528904057.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:17.928Z,1528904057.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:34:17.929Z,1528904057.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:18.309Z,1528904058.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:18.327Z,1528904058.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:34:18.328Z,1528904058.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:18.706Z,1528904058.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:18.723Z,1528904058.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:34:18.724Z,1528904058.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:19.103Z,1528904059.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:19.121Z,1528904059.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T15:34:19.122Z,1528904059.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:19.505Z,1528904059.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:19.528Z,1528904059.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T15:34:19.529Z,1528904059.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:22.607Z,1528904062.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:22.626Z,1528904062.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T15:34:22.627Z,1528904062.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:22.761Z,1528904062.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:22.802Z,1528904062.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T15:34:22.803Z,1528904062.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:23.163Z,1528904063.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:23.181Z,1528904063.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T15:34:23.182Z,1528904063.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:23.562Z,1528904063.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:23.584Z,1528904063.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T15:34:23.585Z,1528904063.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:23.962Z,1528904063.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:23.979Z,1528904063.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T15:34:23.980Z,1528904063.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:24.354Z,1528904064.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:24.371Z,1528904064.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T15:34:24.372Z,1528904064.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:24.747Z,1528904064.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:24.770Z,1528904064.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T15:34:24.771Z,1528904064.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:25.155Z,1528904065.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:25.172Z,1528904065.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T15:34:25.173Z,1528904065.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:25.551Z,1528904065.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:25.575Z,1528904065.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T15:34:25.576Z,1528904065.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:25.958Z,1528904065.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:25.983Z,1528904065.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T15:34:25.984Z,1528904065.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:26.361Z,1528904066.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:26.379Z,1528904066.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T15:34:26.380Z,1528904066.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:26.763Z,1528904066.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:26.788Z,1528904066.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T15:34:26.805Z,1528904066.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:27.153Z,1528904067.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:27.171Z,1528904067.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T15:34:27.172Z,1528904067.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:27.551Z,1528904067.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:27.574Z,1528904067.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T15:34:27.574Z,1528904067.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:27.959Z,1528904067.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:27.977Z,1528904067.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:28.351Z,1528904068.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:28.369Z,1528904068.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:28.743Z,1528904068.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:28.779Z,1528904068.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:29.168Z,1528904069.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:29.186Z,1528904069.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:29.566Z,1528904069.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:29.588Z,1528904069.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:29.962Z,1528904069.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:29.992Z,1528904069.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:30.347Z,1528904070.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:30.382Z,1528904070.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:30.747Z,1528904070.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:30.785Z,1528904070.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:31.148Z,1528904071.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:31.178Z,1528904071.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:31.547Z,1528904071.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:31.566Z,1528904071.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:31.958Z,1528904071.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:31.997Z,1528904071.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:32.365Z,1528904072.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:32.400Z,1528904072.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:32.761Z,1528904072.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:32.780Z,1528904072.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:33.147Z,1528904073.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:33.173Z,1528904073.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:33.551Z,1528904073.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:33.581Z,1528904073.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:33.954Z,1528904073.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:33.986Z,1528904073.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:34.347Z,1528904074.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:34.371Z,1528904074.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:34.755Z,1528904074.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:34.773Z,1528904074.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:35.166Z,1528904075.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:35.184Z,1528904075.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:35.562Z,1528904075.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:35.580Z,1528904075.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:35.963Z,1528904075.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:35.981Z,1528904075.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:36.355Z,1528904076.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:36.373Z,1528904076.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:36.748Z,1528904076.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:36.773Z,1528904076.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:37.155Z,1528904077.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:37.173Z,1528904077.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:37.555Z,1528904077.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:37.615Z,1528904077.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:37.959Z,1528904077.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:37.981Z,1528904077.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:38.362Z,1528904078.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:38.384Z,1528904078.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:38.764Z,1528904078.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:38.788Z,1528904078.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:39.153Z,1528904079.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:39.173Z,1528904079.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:39.551Z,1528904079.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:39.575Z,1528904079.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:39.951Z,1528904079.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:39.974Z,1528904079.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:40.354Z,1528904080.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:40.372Z,1528904080.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:40.751Z,1528904080.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:40.774Z,1528904080.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:41.166Z,1528904081.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:41.184Z,1528904081.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:41.563Z,1528904081.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:41.582Z,1528904081.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:41.963Z,1528904081.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:41.981Z,1528904081.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:42.343Z,1528904082.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:42.371Z,1528904082.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:42.753Z,1528904082.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:42.771Z,1528904082.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:43.154Z,1528904083.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:43.177Z,1528904083.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:43.543Z,1528904083.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:43.583Z,1528904083.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:43.958Z,1528904083.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:43.987Z,1528904083.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:44.367Z,1528904084.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:44.421Z,1528904084.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:44.767Z,1528904084.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:44.785Z,1528904084.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:45.143Z,1528904085.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:45.179Z,1528904085.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:45.547Z,1528904085.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:45.581Z,1528904085.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:45.947Z,1528904085.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:45.980Z,1528904085.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:46.344Z,1528904086.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:46.379Z,1528904086.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:46.747Z,1528904086.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:46.780Z,1528904086.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:47.157Z,1528904087.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:47.192Z,1528904087.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:47.557Z,1528904087.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:47.584Z,1528904087.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:47.957Z,1528904087.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:47.984Z,1528904087.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:48.343Z,1528904088.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:48.361Z,1528904088.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:48.743Z,1528904088.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:48.761Z,1528904088.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:49.148Z,1528904089.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:49.182Z,1528904089.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:49.547Z,1528904089.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:49.564Z,1528904089.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:49.961Z,1528904089.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:49.987Z,1528904089.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:50.361Z,1528904090.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:50.388Z,1528904090.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:50.765Z,1528904090.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:50.800Z,1528904090.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:51.149Z,1528904091.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:51.183Z,1528904091.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:51.550Z,1528904091.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:51.568Z,1528904091.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:51.950Z,1528904091.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:51.968Z,1528904091.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:52.347Z,1528904092.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:52.365Z,1528904092.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:52.750Z,1528904092.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:52.768Z,1528904092.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:53.162Z,1528904093.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:53.201Z,1528904093.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:53.561Z,1528904093.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:53.598Z,1528904093.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:53.961Z,1528904093.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:53.995Z,1528904093.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:54.350Z,1528904094.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:54.368Z,1528904094.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:54.752Z,1528904094.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:54.776Z,1528904094.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:55.151Z,1528904095.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:55.204Z,1528904095.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:55.554Z,1528904095.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:55.576Z,1528904095.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:55.962Z,1528904095.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:55.980Z,1528904095.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:56.361Z,1528904096.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:56.379Z,1528904096.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:56.761Z,1528904096.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:56.820Z,1528904096.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:57.153Z,1528904097.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:57.188Z,1528904097.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:57.553Z,1528904097.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:57.571Z,1528904097.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:57.955Z,1528904097.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:57.972Z,1528904097.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:58.354Z,1528904098.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:58.372Z,1528904098.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:58.753Z,1528904098.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:58.771Z,1528904098.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:59.161Z,1528904099.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:59.179Z,1528904099.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:59.562Z,1528904099.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:59.584Z,1528904099.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:34:59.962Z,1528904099.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:34:59.980Z,1528904099.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:00.354Z,1528904100.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:00.371Z,1528904100.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:00.758Z,1528904100.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:00.775Z,1528904100.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:01.154Z,1528904101.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:01.171Z,1528904101.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:01.554Z,1528904101.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:01.576Z,1528904101.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:01.962Z,1528904101.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:01.984Z,1528904101.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:02.362Z,1528904102.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:02.384Z,1528904102.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:02.763Z,1528904102.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:02.781Z,1528904102.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:03.153Z,1528904103.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:03.171Z,1528904103.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:03.551Z,1528904103.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:03.574Z,1528904103.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:03.954Z,1528904103.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:03.976Z,1528904103.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:04.353Z,1528904104.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:04.371Z,1528904104.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:04.751Z,1528904104.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:04.775Z,1528904104.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:05.165Z,1528904105.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:05.182Z,1528904105.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:05.567Z,1528904105.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:05.592Z,1528904105.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:05.963Z,1528904105.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:05.988Z,1528904105.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:06.359Z,1528904106.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:06.382Z,1528904106.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:06.754Z,1528904106.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:06.796Z,1528904106.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:07.155Z,1528904107.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:07.180Z,1528904107.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:07.550Z,1528904107.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:07.577Z,1528904107.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:07.967Z,1528904107.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:07.985Z,1528904107.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:08.368Z,1528904108.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:08.386Z,1528904108.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:08.766Z,1528904108.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:08.808Z,1528904108.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:09.154Z,1528904109.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:09.172Z,1528904109.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:09.553Z,1528904109.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:09.584Z,1528904109.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:09.947Z,1528904109.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:09.989Z,1528904109.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:10.358Z,1528904110.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:10.376Z,1528904110.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:10.743Z,1528904110.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:10.780Z,1528904110.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:11.167Z,1528904111.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:11.186Z,1528904111.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:11.567Z,1528904111.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:11.586Z,1528904111.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:11.963Z,1528904111.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:11.982Z,1528904111.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:12.348Z,1528904112.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:12.376Z,1528904112.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:12.747Z,1528904112.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:12.783Z,1528904112.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:13.148Z,1528904113.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:13.183Z,1528904113.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:13.559Z,1528904113.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:13.577Z,1528904113.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:13.957Z,1528904113.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:13.981Z,1528904113.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:14.368Z,1528904114.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:14.386Z,1528904114.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:14.768Z,1528904114.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:14.786Z,1528904114.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:15.149Z,1528904115.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:15.177Z,1528904115.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:15.547Z,1528904115.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:15.575Z,1528904115.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:15.969Z,1528904115.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:15.992Z,1528904115.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:16.368Z,1528904116.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:16.387Z,1528904116.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:16.754Z,1528904116.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:16.795Z,1528904116.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:17.149Z,1528904117.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:17.188Z,1528904117.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:17.547Z,1528904117.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:17.566Z,1528904117.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:17.961Z,1528904117.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:17.994Z,1528904117.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:18.357Z,1528904118.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:18.405Z,1528904118.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:18.762Z,1528904118.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:18.796Z,1528904118.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:19.154Z,1528904119.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:19.180Z,1528904119.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:19.554Z,1528904119.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:19.573Z,1528904119.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:22.696Z,1528904122.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:22.721Z,1528904122.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:22.853Z,1528904122.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:22.904Z,1528904122.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:23.258Z,1528904123.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:23.275Z,1528904123.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:23.631Z,1528904123.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:23.667Z,1528904123.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:24.031Z,1528904124.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:24.067Z,1528904124.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:24.432Z,1528904124.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:24.470Z,1528904124.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:24.831Z,1528904124.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:24.865Z,1528904124.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:25.252Z,1528904125.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:25.271Z,1528904125.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:25.650Z,1528904125.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:25.676Z,1528904125.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:26.048Z,1528904126.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:26.066Z,1528904126.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:26.431Z,1528904126.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:26.463Z,1528904126.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:26.831Z,1528904126.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:26.877Z,1528904126.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:27.232Z,1528904127.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:27.271Z,1528904127.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:27.631Z,1528904127.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:27.648Z,1528904127.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:28.046Z,1528904128.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:28.075Z,1528904128.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:28.446Z,1528904128.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:28.472Z,1528904128.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:28.842Z,1528904128.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:28.876Z,1528904128.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:29.231Z,1528904129.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:29.251Z,1528904129.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:29.635Z,1528904129.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:29.698Z,1528904129.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:30.035Z,1528904130.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:30.087Z,1528904130.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:30.435Z,1528904130.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:30.480Z,1528904130.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:30.834Z,1528904130.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:30.852Z,1528904130.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:31.246Z,1528904131.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:31.280Z,1528904131.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:31.646Z,1528904131.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:31.663Z,1528904131.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:32.042Z,1528904132.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:32.060Z,1528904132.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:32.435Z,1528904132.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:32.460Z,1528904132.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:32.838Z,1528904132.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:32.856Z,1528904132.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:33.237Z,1528904133.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:33.255Z,1528904133.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:33.636Z,1528904133.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:33.654Z,1528904133.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:34.046Z,1528904134.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:34.064Z,1528904134.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:34.442Z,1528904134.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:34.459Z,1528904134.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:34.842Z,1528904134.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:34.860Z,1528904134.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:35.237Z,1528904135.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:35.262Z,1528904135.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:35.637Z,1528904135.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:35.672Z,1528904135.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:36.036Z,1528904136.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:36.055Z,1528904136.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:36.434Z,1528904136.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:36.456Z,1528904136.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:36.838Z,1528904136.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:36.856Z,1528904136.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:37.242Z,1528904137.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:37.264Z,1528904137.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:37.643Z,1528904137.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:37.661Z,1528904137.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:38.043Z,1528904138.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:38.060Z,1528904138.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:38.435Z,1528904138.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:38.457Z,1528904138.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:38.838Z,1528904138.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:38.857Z,1528904138.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:39.231Z,1528904139.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:39.255Z,1528904139.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:39.636Z,1528904139.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:39.655Z,1528904139.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:40.045Z,1528904140.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:40.064Z,1528904140.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:40.442Z,1528904140.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:40.464Z,1528904140.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:40.842Z,1528904140.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:40.861Z,1528904140.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:41.235Z,1528904141.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:41.280Z,1528904141.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:41.635Z,1528904141.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:41.676Z,1528904141.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:42.035Z,1528904142.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:42.058Z,1528904142.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:42.435Z,1528904142.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:42.460Z,1528904142.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:42.831Z,1528904142.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:42.854Z,1528904142.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:43.246Z,1528904143.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:43.264Z,1528904143.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:43.648Z,1528904143.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:43.667Z,1528904143.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:44.046Z,1528904144.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:44.064Z,1528904144.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:44.435Z,1528904144.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:44.458Z,1528904144.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:44.838Z,1528904144.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:44.856Z,1528904144.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:45.238Z,1528904145.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:45.260Z,1528904145.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:45.635Z,1528904145.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:45.659Z,1528904145.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:46.046Z,1528904146.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:46.068Z,1528904146.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:46.447Z,1528904146.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:46.465Z,1528904146.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:46.846Z,1528904146.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:46.864Z,1528904146.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:47.238Z,1528904147.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:47.256Z,1528904147.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:47.637Z,1528904147.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:47.660Z,1528904147.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:48.035Z,1528904148.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:48.058Z,1528904148.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:48.436Z,1528904148.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:48.482Z,1528904148.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:48.836Z,1528904148.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:48.872Z,1528904148.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:49.247Z,1528904149.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:49.265Z,1528904149.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:49.651Z,1528904149.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:49.670Z,1528904149.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:50.047Z,1528904150.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:50.072Z,1528904150.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:50.436Z,1528904150.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:50.460Z,1528904150.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:50.838Z,1528904150.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:50.856Z,1528904150.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:51.238Z,1528904151.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:51.260Z,1528904151.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:51.634Z,1528904151.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:51.658Z,1528904151.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:52.052Z,1528904152.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:52.070Z,1528904152.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:52.447Z,1528904152.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:52.472Z,1528904152.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:52.848Z,1528904152.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:52.884Z,1528904152.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:53.232Z,1528904153.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:53.262Z,1528904153.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:53.627Z,1528904153.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:53.662Z,1528904153.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:54.031Z,1528904154.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:54.067Z,1528904154.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:54.432Z,1528904154.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:54.463Z,1528904154.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:54.831Z,1528904154.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:54.859Z,1528904154.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:55.248Z,1528904155.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:55.272Z,1528904155.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:55.650Z,1528904155.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:55.683Z,1528904155.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:56.049Z,1528904156.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:56.067Z,1528904156.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:56.427Z,1528904156.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:56.464Z,1528904156.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:56.831Z,1528904156.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:56.872Z,1528904156.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:57.231Z,1528904157.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:57.266Z,1528904157.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:57.631Z,1528904157.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:57.665Z,1528904157.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:58.053Z,1528904158.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:58.072Z,1528904158.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:58.440Z,1528904158.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:58.467Z,1528904158.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:58.846Z,1528904158.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:58.869Z,1528904158.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:59.231Z,1528904159.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:59.258Z,1528904159.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:35:59.631Z,1528904159.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:35:59.671Z,1528904159.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:00.031Z,1528904160.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:00.070Z,1528904160.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:00.428Z,1528904160.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:00.462Z,1528904160.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:00.827Z,1528904160.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:00.868Z,1528904160.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:01.249Z,1528904161.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:01.299Z,1528904161.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:01.645Z,1528904161.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:01.675Z,1528904161.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:02.043Z,1528904162.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:02.084Z,1528904162.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:02.431Z,1528904162.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:02.449Z,1528904162.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:02.831Z,1528904162.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:02.850Z,1528904162.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:03.231Z,1528904163.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:03.249Z,1528904163.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:03.634Z,1528904163.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:03.652Z,1528904163.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:04.046Z,1528904164.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:04.087Z,1528904164.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:04.441Z,1528904164.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:04.495Z,1528904164.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:04.842Z,1528904164.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:04.860Z,1528904164.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:05.237Z,1528904165.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:05.255Z,1528904165.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:05.636Z,1528904165.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:05.654Z,1528904165.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:06.041Z,1528904166.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:06.059Z,1528904166.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:06.445Z,1528904166.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:06.463Z,1528904166.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:06.843Z,1528904166.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:06.861Z,1528904166.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:07.236Z,1528904167.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:07.254Z,1528904167.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:07.637Z,1528904167.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:07.660Z,1528904167.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:08.042Z,1528904168.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:08.060Z,1528904168.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:08.445Z,1528904168.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:08.463Z,1528904168.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:08.846Z,1528904168.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:08.865Z,1528904168.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:09.238Z,1528904169.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:09.255Z,1528904169.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:09.638Z,1528904169.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:09.655Z,1528904169.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:10.046Z,1528904170.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:10.064Z,1528904170.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:10.445Z,1528904170.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:10.486Z,1528904170.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:10.842Z,1528904170.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:10.892Z,1528904170.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:11.239Z,1528904171.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:11.257Z,1528904171.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:11.631Z,1528904171.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:11.662Z,1528904171.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:12.046Z,1528904172.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:12.064Z,1528904172.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:12.447Z,1528904172.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:12.465Z,1528904172.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:12.843Z,1528904172.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:12.861Z,1528904172.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:13.235Z,1528904173.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:13.258Z,1528904173.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:13.635Z,1528904173.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:13.667Z,1528904173.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:14.047Z,1528904174.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:14.095Z,1528904174.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:14.445Z,1528904174.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:14.463Z,1528904174.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:14.846Z,1528904174.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:14.864Z,1528904174.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:15.238Z,1528904175.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:15.255Z,1528904175.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:15.635Z,1528904175.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:15.657Z,1528904175.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:16.046Z,1528904176.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:16.065Z,1528904176.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:16.446Z,1528904176.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:16.464Z,1528904176.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:16.846Z,1528904176.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:16.863Z,1528904176.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:17.239Z,1528904177.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:17.257Z,1528904177.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:17.631Z,1528904177.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:17.654Z,1528904177.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:18.046Z,1528904178.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:18.064Z,1528904178.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:18.447Z,1528904178.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:18.466Z,1528904178.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:18.846Z,1528904178.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:18.864Z,1528904178.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:19.242Z,1528904179.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:19.260Z,1528904179.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:19.642Z,1528904179.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:19.660Z,1528904179.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:20.046Z,1528904180.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:20.068Z,1528904180.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:20.449Z,1528904180.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:20.468Z,1528904180.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:20.849Z,1528904180.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:20.868Z,1528904180.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:21.239Z,1528904181.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:21.257Z,1528904181.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:21.641Z,1528904181.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:21.659Z,1528904181.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:22.049Z,1528904182.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:22.068Z,1528904182.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:22.446Z,1528904182.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:22.468Z,1528904182.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:22.846Z,1528904182.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:22.871Z,1528904182.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:23.244Z,1528904183.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:23.297Z,1528904183.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:26.357Z,1528904186.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:26.398Z,1528904186.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:26.539Z,1528904186.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:26.584Z,1528904186.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:26.925Z,1528904186.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:26.952Z,1528904186.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:27.325Z,1528904187.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:27.351Z,1528904187.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:27.713Z,1528904187.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:27.731Z,1528904187.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:28.115Z,1528904188.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:28.156Z,1528904188.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:28.514Z,1528904188.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:28.533Z,1528904188.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:28.914Z,1528904188.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:28.932Z,1528904188.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:29.325Z,1528904189.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:29.359Z,1528904189.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:29.725Z,1528904189.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:29.743Z,1528904189.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:30.121Z,1528904190.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:30.139Z,1528904190.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:30.510Z,1528904190.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:30.549Z,1528904190.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:30.917Z,1528904190.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:30.935Z,1528904190.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:31.316Z,1528904191.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:31.347Z,1528904191.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:31.715Z,1528904191.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:31.740Z,1528904191.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:32.126Z,1528904192.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:32.148Z,1528904192.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:32.526Z,1528904192.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:32.548Z,1528904192.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:32.926Z,1528904192.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:32.944Z,1528904192.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:33.318Z,1528904193.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:33.336Z,1528904193.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:33.715Z,1528904193.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:33.738Z,1528904193.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:34.118Z,1528904194.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:34.136Z,1528904194.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:34.511Z,1528904194.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:34.535Z,1528904194.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:34.915Z,1528904194.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:34.937Z,1528904194.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:35.327Z,1528904195.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:35.346Z,1528904195.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:35.726Z,1528904195.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:35.750Z,1528904195.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:36.130Z,1528904196.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:36.179Z,1528904196.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:36.522Z,1528904196.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:36.540Z,1528904196.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:36.915Z,1528904196.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:36.938Z,1528904196.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:37.317Z,1528904197.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:37.335Z,1528904197.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:37.718Z,1528904197.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:37.736Z,1528904197.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:38.122Z,1528904198.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:38.154Z,1528904198.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:38.527Z,1528904198.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:38.552Z,1528904198.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:38.932Z,1528904198.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:38.968Z,1528904198.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:39.311Z,1528904199.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:39.344Z,1528904199.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:39.711Z,1528904199.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:39.747Z,1528904199.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:40.115Z,1528904200.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:40.148Z,1528904200.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:40.512Z,1528904200.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:40.542Z,1528904200.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:40.915Z,1528904200.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:40.943Z,1528904200.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:41.333Z,1528904201.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:41.351Z,1528904201.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:41.725Z,1528904201.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:41.758Z,1528904201.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:42.126Z,1528904202.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:42.150Z,1528904202.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:42.511Z,1528904202.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:42.546Z,1528904202.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:42.912Z,1528904202.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:42.950Z,1528904202.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:43.312Z,1528904203.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:43.338Z,1528904203.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:43.711Z,1528904203.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:43.730Z,1528904203.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:44.121Z,1528904204.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:44.156Z,1528904204.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:44.529Z,1528904204.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:44.562Z,1528904204.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:44.926Z,1528904204.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:44.965Z,1528904204.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:45.314Z,1528904205.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:45.332Z,1528904205.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:45.715Z,1528904205.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:45.733Z,1528904205.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:46.118Z,1528904206.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:46.136Z,1528904206.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:46.524Z,1528904206.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:46.542Z,1528904206.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:46.918Z,1528904206.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:46.936Z,1528904206.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:47.325Z,1528904207.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:47.344Z,1528904207.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:47.726Z,1528904207.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:47.748Z,1528904207.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:48.123Z,1528904208.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:48.141Z,1528904208.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:48.518Z,1528904208.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:48.536Z,1528904208.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:48.911Z,1528904208.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:48.942Z,1528904208.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:49.310Z,1528904209.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:49.352Z,1528904209.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:49.714Z,1528904209.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:49.737Z,1528904209.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:50.123Z,1528904210.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:50.142Z,1528904210.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:50.526Z,1528904210.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:50.545Z,1528904210.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:50.926Z,1528904210.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:50.956Z,1528904210.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:51.317Z,1528904211.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:51.353Z,1528904211.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:51.716Z,1528904211.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:51.735Z,1528904211.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:52.107Z,1528904212.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:52.135Z,1528904212.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:52.518Z,1528904212.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:52.540Z,1528904212.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:52.916Z,1528904212.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:52.934Z,1528904212.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:53.330Z,1528904213.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:53.348Z,1528904213.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:53.727Z,1528904213.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:53.745Z,1528904213.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:54.127Z,1528904214.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:54.145Z,1528904214.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:54.508Z,1528904214.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:54.536Z,1528904214.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:54.907Z,1528904214.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:54.934Z,1528904214.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:55.312Z,1528904215.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:55.339Z,1528904215.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:55.711Z,1528904215.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:55.739Z,1528904215.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:56.123Z,1528904216.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:56.141Z,1528904216.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:56.535Z,1528904216.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:56.553Z,1528904216.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:56.931Z,1528904216.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:56.956Z,1528904216.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:57.311Z,1528904217.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:57.351Z,1528904217.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:57.711Z,1528904217.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:57.747Z,1528904217.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:58.111Z,1528904218.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:58.139Z,1528904218.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:58.508Z,1528904218.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:58.543Z,1528904218.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:58.911Z,1528904218.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:58.949Z,1528904218.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:59.332Z,1528904219.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:59.350Z,1528904219.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:36:59.731Z,1528904219.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:36:59.749Z,1528904219.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:00.127Z,1528904220.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:00.145Z,1528904220.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:00.511Z,1528904220.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:00.541Z,1528904220.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:00.911Z,1528904220.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:00.956Z,1528904220.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:01.315Z,1528904221.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:01.334Z,1528904221.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:01.713Z,1528904221.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:01.737Z,1528904221.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:02.125Z,1528904222.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:02.168Z,1528904222.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:02.525Z,1528904222.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:02.543Z,1528904222.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:02.925Z,1528904222.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:02.943Z,1528904222.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:03.316Z,1528904223.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:03.334Z,1528904223.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:03.716Z,1528904223.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:03.734Z,1528904223.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:04.121Z,1528904224.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:04.144Z,1528904224.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:04.525Z,1528904224.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:04.543Z,1528904224.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:04.922Z,1528904224.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:04.939Z,1528904224.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:05.317Z,1528904225.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:05.335Z,1528904225.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:05.716Z,1528904225.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:05.740Z,1528904225.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:06.122Z,1528904226.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:06.140Z,1528904226.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:06.529Z,1528904226.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:06.570Z,1528904226.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:06.922Z,1528904226.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:06.940Z,1528904226.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:07.310Z,1528904227.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:07.340Z,1528904227.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:07.716Z,1528904227.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:07.734Z,1528904227.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:08.122Z,1528904228.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:08.140Z,1528904228.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:08.525Z,1528904228.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:08.543Z,1528904228.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:08.925Z,1528904228.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:08.943Z,1528904228.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:08.943Z,1528904228.943 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 243
2018-06-13T15:37:08.943Z,1528904228.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:37:08.945Z,1528904228.945 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:08.945Z,1528904228.945 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 243
2018-06-13T15:37:08.945Z,1528904228.945 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:37:08.947Z,1528904228.947 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:08.947Z,1528904228.947 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 243
2018-06-13T15:37:08.947Z,1528904228.947 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:37:09.045Z,1528904229.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:37:09.045Z,1528904229.045 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:37:09.045Z,1528904229.045 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:37:09.318Z,1528904229.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:09.407Z,1528904229.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:37:09.407Z,1528904229.407 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 243
2018-06-13T15:37:09.407Z,1528904229.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:37:09.407Z,1528904229.407 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 243
2018-06-13T15:37:09.408Z,1528904229.408 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:37:09.408Z,1528904229.408 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 243
2018-06-13T15:37:09.717Z,1528904229.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:09.734Z,1528904229.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:37:09.734Z,1528904229.734 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:37:09.734Z,1528904229.734 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:37:09.735Z,1528904229.735 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:37:09.735Z,1528904229.735 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:37:09.735Z,1528904229.735 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:37:09.736Z,1528904229.736 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:37:09.736Z,1528904229.736 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:37:09.737Z,1528904229.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:37:10.121Z,1528904230.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:10.155Z,1528904230.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:37:10.156Z,1528904230.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:10.526Z,1528904230.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:10.548Z,1528904230.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:37:10.548Z,1528904230.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:10.926Z,1528904230.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:10.944Z,1528904230.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:37:10.945Z,1528904230.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:11.315Z,1528904231.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:11.348Z,1528904231.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:37:11.349Z,1528904231.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:11.717Z,1528904231.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:11.735Z,1528904231.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:37:11.735Z,1528904231.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:12.126Z,1528904232.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:12.143Z,1528904232.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:37:12.144Z,1528904232.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:12.525Z,1528904232.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:12.547Z,1528904232.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:37:12.548Z,1528904232.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:12.928Z,1528904232.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:12.945Z,1528904232.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:37:12.946Z,1528904232.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:13.322Z,1528904233.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:13.339Z,1528904233.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:37:13.340Z,1528904233.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:13.715Z,1528904233.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:13.739Z,1528904233.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:37:13.740Z,1528904233.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:14.126Z,1528904234.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:14.151Z,1528904234.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:37:14.152Z,1528904234.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:14.531Z,1528904234.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:14.578Z,1528904234.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:37:14.579Z,1528904234.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:14.932Z,1528904234.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:14.955Z,1528904234.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:37:14.956Z,1528904234.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:15.312Z,1528904235.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:15.344Z,1528904235.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:37:15.345Z,1528904235.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:15.711Z,1528904235.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:15.743Z,1528904235.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:37:15.744Z,1528904235.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:16.131Z,1528904236.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:16.148Z,1528904236.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:37:16.149Z,1528904236.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:16.534Z,1528904236.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:16.552Z,1528904236.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:37:16.553Z,1528904236.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:16.927Z,1528904236.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:16.945Z,1528904236.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:37:16.946Z,1528904236.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:17.312Z,1528904237.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:17.343Z,1528904237.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:37:17.344Z,1528904237.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:17.712Z,1528904237.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:17.739Z,1528904237.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:37:17.740Z,1528904237.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:18.128Z,1528904238.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:18.152Z,1528904238.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:37:18.153Z,1528904238.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:18.532Z,1528904238.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:18.555Z,1528904238.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:37:18.556Z,1528904238.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:18.931Z,1528904238.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:18.948Z,1528904238.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:37:18.950Z,1528904238.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:19.322Z,1528904239.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:19.340Z,1528904239.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:37:19.340Z,1528904239.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:19.712Z,1528904239.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:19.747Z,1528904239.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:37:19.748Z,1528904239.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:22.838Z,1528904242.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:22.855Z,1528904242.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T15:37:22.856Z,1528904242.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:23.020Z,1528904243.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:23.038Z,1528904243.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T15:37:23.039Z,1528904243.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:23.406Z,1528904243.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:23.430Z,1528904243.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T15:37:23.431Z,1528904243.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:23.798Z,1528904243.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:23.832Z,1528904243.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T15:37:23.833Z,1528904243.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:24.195Z,1528904244.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:24.236Z,1528904244.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T15:37:24.241Z,1528904244.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:24.592Z,1528904244.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:24.615Z,1528904244.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T15:37:24.616Z,1528904244.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:24.993Z,1528904244.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:25.012Z,1528904245.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T15:37:25.013Z,1528904245.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:25.410Z,1528904245.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:25.447Z,1528904245.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T15:37:25.448Z,1528904245.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:25.814Z,1528904245.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:25.841Z,1528904245.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T15:37:25.842Z,1528904245.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:26.210Z,1528904246.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:26.242Z,1528904246.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T15:37:26.243Z,1528904246.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:26.598Z,1528904246.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:26.620Z,1528904246.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T15:37:26.637Z,1528904246.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:26.999Z,1528904246.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:27.023Z,1528904247.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T15:37:27.024Z,1528904247.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:27.398Z,1528904247.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:27.423Z,1528904247.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T15:37:27.423Z,1528904247.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:27.801Z,1528904247.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:27.851Z,1528904247.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T15:37:27.852Z,1528904247.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:28.210Z,1528904248.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:28.228Z,1528904248.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T15:37:28.229Z,1528904248.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:28.610Z,1528904248.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:28.628Z,1528904248.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T15:37:28.628Z,1528904248.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:29.006Z,1528904249.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:29.032Z,1528904249.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:29.404Z,1528904249.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:29.428Z,1528904249.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:29.802Z,1528904249.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:29.821Z,1528904249.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:30.198Z,1528904250.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:30.228Z,1528904250.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:30.604Z,1528904250.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:30.622Z,1528904250.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:31.002Z,1528904251.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:31.021Z,1528904251.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:31.407Z,1528904251.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:31.425Z,1528904251.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:31.810Z,1528904251.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:31.829Z,1528904251.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:32.207Z,1528904252.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:32.226Z,1528904252.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:32.603Z,1528904252.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:32.621Z,1528904252.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:32.996Z,1528904252.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:33.022Z,1528904253.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:33.404Z,1528904253.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:33.422Z,1528904253.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:33.802Z,1528904253.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:33.820Z,1528904253.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:34.210Z,1528904254.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:34.228Z,1528904254.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:34.608Z,1528904254.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:34.638Z,1528904254.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:35.012Z,1528904255.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:35.036Z,1528904255.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:35.399Z,1528904255.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:35.422Z,1528904255.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:35.797Z,1528904255.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:35.820Z,1528904255.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:36.201Z,1528904256.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:36.224Z,1528904256.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:36.602Z,1528904256.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:36.621Z,1528904256.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:36.997Z,1528904256.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:37.016Z,1528904257.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:37.411Z,1528904257.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:37.429Z,1528904257.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:37.811Z,1528904257.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:37.836Z,1528904257.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:38.208Z,1528904258.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:38.226Z,1528904258.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:38.601Z,1528904258.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:38.619Z,1528904258.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:39.003Z,1528904259.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:39.021Z,1528904259.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:39.399Z,1528904259.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:39.417Z,1528904259.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:39.801Z,1528904259.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:39.824Z,1528904259.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:40.213Z,1528904260.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:40.238Z,1528904260.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:40.606Z,1528904260.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:40.663Z,1528904260.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:41.012Z,1528904261.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:41.030Z,1528904261.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:41.395Z,1528904261.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:41.426Z,1528904261.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:41.791Z,1528904261.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:41.819Z,1528904261.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:42.195Z,1528904262.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:42.223Z,1528904262.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:42.595Z,1528904262.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:42.624Z,1528904262.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:42.991Z,1528904262.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:43.028Z,1528904263.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:43.412Z,1528904263.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:43.437Z,1528904263.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:43.813Z,1528904263.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:43.831Z,1528904263.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:44.210Z,1528904264.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:44.227Z,1528904264.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:44.591Z,1528904264.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:44.621Z,1528904264.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:44.991Z,1528904264.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:45.025Z,1528904265.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:45.392Z,1528904265.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:45.422Z,1528904265.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:45.795Z,1528904265.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:45.828Z,1528904265.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:46.215Z,1528904266.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:46.233Z,1528904266.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:46.612Z,1528904266.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:46.630Z,1528904266.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:47.006Z,1528904267.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:47.030Z,1528904267.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:47.395Z,1528904267.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:47.425Z,1528904267.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:47.791Z,1528904267.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:47.823Z,1528904267.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:48.195Z,1528904268.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:48.229Z,1528904268.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:48.595Z,1528904268.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:48.716Z,1528904268.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:48.991Z,1528904268.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:49.030Z,1528904269.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:49.412Z,1528904269.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:49.430Z,1528904269.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:49.810Z,1528904269.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:49.835Z,1528904269.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:50.202Z,1528904270.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:50.238Z,1528904270.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:50.595Z,1528904270.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:50.632Z,1528904270.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:50.995Z,1528904270.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:51.027Z,1528904271.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:51.396Z,1528904271.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:51.426Z,1528904271.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:51.791Z,1528904271.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:51.832Z,1528904271.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:52.216Z,1528904272.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:52.241Z,1528904272.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:52.613Z,1528904272.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:52.631Z,1528904272.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:53.012Z,1528904273.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:53.038Z,1528904273.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:53.391Z,1528904273.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:53.439Z,1528904273.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:53.796Z,1528904273.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:53.833Z,1528904273.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:54.207Z,1528904274.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:54.236Z,1528904274.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:54.606Z,1528904274.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:54.640Z,1528904274.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:55.006Z,1528904275.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:55.034Z,1528904275.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:55.395Z,1528904275.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:55.430Z,1528904275.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:55.796Z,1528904275.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:55.836Z,1528904275.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:56.206Z,1528904276.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:56.240Z,1528904276.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:56.610Z,1528904276.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:56.644Z,1528904276.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:57.010Z,1528904277.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:57.028Z,1528904277.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:57.398Z,1528904277.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:57.416Z,1528904277.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:57.799Z,1528904277.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:57.818Z,1528904277.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:58.210Z,1528904278.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:58.228Z,1528904278.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:58.606Z,1528904278.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:58.624Z,1528904278.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:59.006Z,1528904279.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:59.024Z,1528904279.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:59.399Z,1528904279.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:59.417Z,1528904279.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:37:59.797Z,1528904279.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:37:59.815Z,1528904279.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:00.208Z,1528904280.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:00.228Z,1528904280.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:00.610Z,1528904280.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:00.628Z,1528904280.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:01.006Z,1528904281.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:01.031Z,1528904281.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:01.402Z,1528904281.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:01.420Z,1528904281.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:01.801Z,1528904281.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:01.819Z,1528904281.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:02.203Z,1528904282.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:02.228Z,1528904282.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:02.611Z,1528904282.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:02.629Z,1528904282.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:03.010Z,1528904283.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:03.052Z,1528904283.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:03.403Z,1528904283.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:03.421Z,1528904283.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:03.801Z,1528904283.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:03.819Z,1528904283.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:04.211Z,1528904284.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:04.229Z,1528904284.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:04.607Z,1528904284.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:04.626Z,1528904284.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:05.007Z,1528904285.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:05.032Z,1528904285.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:05.404Z,1528904285.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:05.422Z,1528904285.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:05.798Z,1528904285.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:05.816Z,1528904285.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:06.210Z,1528904286.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:06.235Z,1528904286.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:06.611Z,1528904286.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:06.662Z,1528904286.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:07.011Z,1528904287.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:07.036Z,1528904287.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:07.395Z,1528904287.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:07.430Z,1528904287.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:07.804Z,1528904287.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:07.822Z,1528904287.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:08.209Z,1528904288.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:08.227Z,1528904288.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:08.616Z,1528904288.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:08.640Z,1528904288.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:09.016Z,1528904289.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:09.035Z,1528904289.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:09.392Z,1528904289.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:09.422Z,1528904289.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:09.791Z,1528904289.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:09.820Z,1528904289.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:10.216Z,1528904290.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:10.240Z,1528904290.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:10.616Z,1528904290.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:10.634Z,1528904290.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:11.013Z,1528904291.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:11.031Z,1528904291.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:11.404Z,1528904291.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:11.422Z,1528904291.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:11.791Z,1528904291.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:11.820Z,1528904291.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:12.205Z,1528904292.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:12.233Z,1528904292.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:12.617Z,1528904292.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:12.635Z,1528904292.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:13.011Z,1528904293.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:13.028Z,1528904293.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:13.395Z,1528904293.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:13.425Z,1528904293.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:13.795Z,1528904293.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:13.826Z,1528904293.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:14.208Z,1528904294.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:14.228Z,1528904294.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:14.615Z,1528904294.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:14.634Z,1528904294.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:15.017Z,1528904295.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:15.040Z,1528904295.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:15.396Z,1528904295.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:15.424Z,1528904295.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:15.795Z,1528904295.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:15.823Z,1528904295.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:16.217Z,1528904296.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:16.241Z,1528904296.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:16.612Z,1528904296.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:16.630Z,1528904296.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:17.013Z,1528904297.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:17.031Z,1528904297.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:17.396Z,1528904297.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:17.430Z,1528904297.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:17.791Z,1528904297.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:17.819Z,1528904297.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:18.213Z,1528904298.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:18.231Z,1528904298.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:18.617Z,1528904298.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:18.635Z,1528904298.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:19.008Z,1528904299.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:19.034Z,1528904299.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:19.395Z,1528904299.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:19.440Z,1528904299.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:19.443Z,1528904299.443 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T15:38:19.443Z,1528904299.443 [Default:CheckIn:C.Wait] Stopped
2018-06-13T15:38:19.443Z,1528904299.443 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T15:38:19.443Z,1528904299.443 [Default:CheckIn:D] Running Loop=1
2018-06-13T15:38:19.788Z,1528904299.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:19.823Z,1528904299.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:19.830Z,1528904299.830 [Default:CheckIn:D] Stopped
2018-06-13T15:38:19.830Z,1528904299.830 [Default:CheckIn:E] Running Loop=1
2018-06-13T15:38:20.213Z,1528904300.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:20.231Z,1528904300.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:20.234Z,1528904300.234 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 731.106445 min 
2018-06-13T15:38:20.234Z,1528904300.234 [Default:CheckIn:E] Stopped
2018-06-13T15:38:20.235Z,1528904300.235 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T15:38:20.235Z,1528904300.235 [Default:CheckIn] Stopped
2018-06-13T15:38:20.235Z,1528904300.235 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T15:38:20.235Z,1528904300.235 [Default:CheckIn](INFO): Running loop #71
2018-06-13T15:38:20.235Z,1528904300.235 [Default:CheckIn] Running Loop=71
2018-06-13T15:38:20.235Z,1528904300.235 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T15:38:20.235Z,1528904300.235 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T15:38:20.614Z,1528904300.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:20.652Z,1528904300.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:21.006Z,1528904301.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:21.040Z,1528904301.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:21.394Z,1528904301.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:21.420Z,1528904301.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:21.795Z,1528904301.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:21.814Z,1528904301.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:22.210Z,1528904302.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:22.249Z,1528904302.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:22.610Z,1528904302.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:22.628Z,1528904302.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:25.743Z,1528904305.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:25.772Z,1528904305.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:25.910Z,1528904305.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:25.928Z,1528904305.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:26.311Z,1528904306.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:26.330Z,1528904306.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:26.712Z,1528904306.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:26.730Z,1528904306.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:27.110Z,1528904307.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:27.128Z,1528904307.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:27.525Z,1528904307.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:27.559Z,1528904307.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:27.925Z,1528904307.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:27.960Z,1528904307.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:28.321Z,1528904308.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:28.355Z,1528904308.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:28.714Z,1528904308.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:28.732Z,1528904308.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:29.110Z,1528904309.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:29.135Z,1528904309.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:29.510Z,1528904309.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:29.528Z,1528904309.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:29.914Z,1528904309.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:29.932Z,1528904309.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:30.325Z,1528904310.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:30.367Z,1528904310.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:30.721Z,1528904310.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:30.739Z,1528904310.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:31.126Z,1528904311.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:31.166Z,1528904311.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:31.513Z,1528904311.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:31.530Z,1528904311.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:31.912Z,1528904311.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:31.930Z,1528904311.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:32.312Z,1528904312.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:32.329Z,1528904312.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:32.714Z,1528904312.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:32.731Z,1528904312.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:33.112Z,1528904313.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:33.131Z,1528904313.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:33.525Z,1528904313.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:33.543Z,1528904313.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:33.921Z,1528904313.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:33.939Z,1528904313.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:34.318Z,1528904314.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:34.335Z,1528904314.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:34.714Z,1528904314.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:34.732Z,1528904314.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:35.112Z,1528904315.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:35.129Z,1528904315.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:35.512Z,1528904315.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:35.530Z,1528904315.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:35.915Z,1528904315.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:35.933Z,1528904315.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:36.321Z,1528904316.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:36.339Z,1528904316.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:36.722Z,1528904316.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:36.739Z,1528904316.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:37.117Z,1528904317.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:37.140Z,1528904317.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:37.512Z,1528904317.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:37.530Z,1528904317.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:37.912Z,1528904317.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:37.930Z,1528904317.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:38.314Z,1528904318.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:38.332Z,1528904318.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:38.714Z,1528904318.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:38.732Z,1528904318.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:39.114Z,1528904319.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:39.132Z,1528904319.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:39.525Z,1528904319.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:39.543Z,1528904319.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:39.921Z,1528904319.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:39.939Z,1528904319.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:40.322Z,1528904320.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:40.339Z,1528904320.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:40.714Z,1528904320.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:40.731Z,1528904320.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:41.116Z,1528904321.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:41.134Z,1528904321.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:41.517Z,1528904321.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:41.535Z,1528904321.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:41.916Z,1528904321.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:41.934Z,1528904321.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:42.321Z,1528904322.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:42.339Z,1528904322.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:42.726Z,1528904322.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:42.744Z,1528904322.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:43.118Z,1528904323.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:43.140Z,1528904323.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:43.516Z,1528904323.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:43.534Z,1528904323.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:43.916Z,1528904323.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:43.940Z,1528904323.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:44.311Z,1528904324.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:44.333Z,1528904324.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:44.714Z,1528904324.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:44.731Z,1528904324.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:45.116Z,1528904325.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:45.134Z,1528904325.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:45.519Z,1528904325.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:45.537Z,1528904325.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:45.925Z,1528904325.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:45.943Z,1528904325.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:46.322Z,1528904326.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:46.340Z,1528904326.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:46.716Z,1528904326.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:46.733Z,1528904326.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:47.116Z,1528904327.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:47.134Z,1528904327.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:47.518Z,1528904327.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:47.536Z,1528904327.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:47.910Z,1528904327.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:47.932Z,1528904327.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:48.325Z,1528904328.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:48.348Z,1528904328.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:48.722Z,1528904328.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:48.744Z,1528904328.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:49.122Z,1528904329.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:49.144Z,1528904329.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:49.518Z,1528904329.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:49.536Z,1528904329.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:49.917Z,1528904329.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:49.935Z,1528904329.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:50.311Z,1528904330.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:50.334Z,1528904330.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:50.714Z,1528904330.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:50.731Z,1528904330.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:51.117Z,1528904331.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:51.134Z,1528904331.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:51.522Z,1528904331.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:51.544Z,1528904331.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:51.922Z,1528904331.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:51.940Z,1528904331.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:52.323Z,1528904332.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:52.340Z,1528904332.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:52.717Z,1528904332.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:52.735Z,1528904332.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:53.119Z,1528904333.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:53.137Z,1528904333.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:53.518Z,1528904333.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:53.536Z,1528904333.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:53.916Z,1528904333.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:53.934Z,1528904333.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:54.326Z,1528904334.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:54.344Z,1528904334.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:54.726Z,1528904334.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:54.743Z,1528904334.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:55.120Z,1528904335.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:55.163Z,1528904335.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:55.515Z,1528904335.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:55.533Z,1528904335.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:55.914Z,1528904335.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:55.932Z,1528904335.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:56.314Z,1528904336.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:56.331Z,1528904336.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:56.713Z,1528904336.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:56.741Z,1528904336.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:57.114Z,1528904337.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:57.136Z,1528904337.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:57.522Z,1528904337.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:57.540Z,1528904337.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:57.925Z,1528904337.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:57.942Z,1528904337.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:58.326Z,1528904338.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:58.344Z,1528904338.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:58.711Z,1528904338.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:58.734Z,1528904338.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:59.114Z,1528904339.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:59.139Z,1528904339.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:59.514Z,1528904339.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:59.532Z,1528904339.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:38:59.911Z,1528904339.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:38:59.934Z,1528904339.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:00.325Z,1528904340.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:00.344Z,1528904340.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:00.721Z,1528904340.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:00.740Z,1528904340.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:01.122Z,1528904341.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:01.141Z,1528904341.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:01.524Z,1528904341.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:01.542Z,1528904341.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:01.906Z,1528904341.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:01.940Z,1528904341.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:02.311Z,1528904342.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:02.334Z,1528904342.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:02.713Z,1528904342.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:02.741Z,1528904342.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:03.114Z,1528904343.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:03.132Z,1528904343.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:03.523Z,1528904343.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:03.548Z,1528904343.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:03.924Z,1528904343.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:03.948Z,1528904343.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:04.319Z,1528904344.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:04.338Z,1528904344.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:04.711Z,1528904344.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:04.735Z,1528904344.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:05.114Z,1528904345.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:05.132Z,1528904345.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:05.512Z,1528904345.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:05.530Z,1528904345.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:05.911Z,1528904345.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:05.934Z,1528904345.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:06.322Z,1528904346.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:06.340Z,1528904346.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:06.721Z,1528904346.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:06.740Z,1528904346.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:07.122Z,1528904347.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:07.139Z,1528904347.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:07.512Z,1528904347.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:07.543Z,1528904347.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:07.903Z,1528904347.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:07.935Z,1528904347.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:08.326Z,1528904348.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:08.348Z,1528904348.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:08.728Z,1528904348.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:08.746Z,1528904348.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:09.119Z,1528904349.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:09.137Z,1528904349.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:09.509Z,1528904349.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:09.534Z,1528904349.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:09.914Z,1528904349.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:09.936Z,1528904349.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:10.323Z,1528904350.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:10.340Z,1528904350.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:10.727Z,1528904350.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:10.745Z,1528904350.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:11.127Z,1528904351.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:11.145Z,1528904351.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:11.503Z,1528904351.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:11.543Z,1528904351.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:11.912Z,1528904351.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:11.931Z,1528904351.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:12.326Z,1528904352.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:12.344Z,1528904352.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:12.726Z,1528904352.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:12.745Z,1528904352.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:13.122Z,1528904353.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:13.140Z,1528904353.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:13.512Z,1528904353.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:13.547Z,1528904353.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:13.907Z,1528904353.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:13.934Z,1528904353.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:14.323Z,1528904354.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:14.341Z,1528904354.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:14.728Z,1528904354.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:14.746Z,1528904354.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:15.123Z,1528904355.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:15.141Z,1528904355.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:15.506Z,1528904355.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:15.549Z,1528904355.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:15.907Z,1528904355.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:15.942Z,1528904355.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:16.324Z,1528904356.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:16.342Z,1528904356.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:16.727Z,1528904356.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:16.745Z,1528904356.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:17.128Z,1528904357.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:17.146Z,1528904357.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:17.504Z,1528904357.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:17.537Z,1528904357.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:17.907Z,1528904357.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:17.940Z,1528904357.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:18.333Z,1528904358.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:18.351Z,1528904358.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:18.717Z,1528904358.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:18.744Z,1528904358.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:19.117Z,1528904359.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:19.144Z,1528904359.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:19.512Z,1528904359.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:19.550Z,1528904359.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:19.911Z,1528904359.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:19.951Z,1528904359.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:23.053Z,1528904363.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:23.072Z,1528904363.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:23.217Z,1528904363.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:23.246Z,1528904363.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:23.621Z,1528904363.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:23.649Z,1528904363.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:24.011Z,1528904364.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:24.028Z,1528904364.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:24.406Z,1528904364.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:24.424Z,1528904364.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:24.807Z,1528904364.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:24.824Z,1528904364.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:25.206Z,1528904365.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:25.224Z,1528904365.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:25.614Z,1528904365.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:25.632Z,1528904365.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:26.017Z,1528904366.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:26.035Z,1528904366.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:26.417Z,1528904366.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:26.435Z,1528904366.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:26.803Z,1528904366.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:26.834Z,1528904366.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:27.209Z,1528904367.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:27.227Z,1528904367.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:27.608Z,1528904367.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:27.635Z,1528904367.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:28.008Z,1528904368.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:28.032Z,1528904368.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:28.421Z,1528904368.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:28.460Z,1528904368.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:28.817Z,1528904368.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:28.835Z,1528904368.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:29.215Z,1528904369.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:29.234Z,1528904369.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:29.607Z,1528904369.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:29.629Z,1528904369.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:30.010Z,1528904370.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:30.028Z,1528904370.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:30.410Z,1528904370.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:30.432Z,1528904370.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:30.807Z,1528904370.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:30.838Z,1528904370.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:31.207Z,1528904371.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:31.242Z,1528904371.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:31.612Z,1528904371.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:31.644Z,1528904371.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:32.018Z,1528904372.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:32.040Z,1528904372.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:32.420Z,1528904372.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:32.438Z,1528904372.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:32.809Z,1528904372.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:32.827Z,1528904372.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:33.207Z,1528904373.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:33.230Z,1528904373.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:33.611Z,1528904373.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:33.628Z,1528904373.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:34.003Z,1528904374.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:34.026Z,1528904374.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:34.418Z,1528904374.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:34.437Z,1528904374.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:34.819Z,1528904374.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:34.836Z,1528904374.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:35.222Z,1528904375.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:35.240Z,1528904375.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:35.607Z,1528904375.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:35.630Z,1528904375.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:36.010Z,1528904376.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:36.028Z,1528904376.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:36.406Z,1528904376.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:36.423Z,1528904376.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:36.810Z,1528904376.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:36.827Z,1528904376.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:37.208Z,1528904377.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:37.241Z,1528904377.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:37.619Z,1528904377.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:37.636Z,1528904377.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:38.018Z,1528904378.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:38.040Z,1528904378.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:38.419Z,1528904378.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:38.444Z,1528904378.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:38.803Z,1528904378.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:38.826Z,1528904378.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:39.207Z,1528904379.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:39.231Z,1528904379.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:39.611Z,1528904379.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:39.629Z,1528904379.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:40.003Z,1528904380.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:40.027Z,1528904380.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:40.419Z,1528904380.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:40.437Z,1528904380.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:40.819Z,1528904380.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:40.837Z,1528904380.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:41.216Z,1528904381.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:41.247Z,1528904381.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:41.603Z,1528904381.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:41.637Z,1528904381.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:42.008Z,1528904382.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:42.042Z,1528904382.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:42.404Z,1528904382.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:42.422Z,1528904382.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:42.808Z,1528904382.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:42.826Z,1528904382.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:43.207Z,1528904383.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:43.225Z,1528904383.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:43.614Z,1528904383.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:43.652Z,1528904383.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:44.018Z,1528904384.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:44.036Z,1528904384.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:44.418Z,1528904384.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:44.436Z,1528904384.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:44.805Z,1528904384.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:44.828Z,1528904384.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:45.209Z,1528904385.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:45.227Z,1528904385.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:45.608Z,1528904385.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:45.642Z,1528904385.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:46.003Z,1528904386.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:46.028Z,1528904386.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:46.415Z,1528904386.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:46.440Z,1528904386.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:46.817Z,1528904386.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:46.836Z,1528904386.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:47.216Z,1528904387.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:47.240Z,1528904387.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:47.607Z,1528904387.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:47.638Z,1528904387.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:48.010Z,1528904388.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:48.032Z,1528904388.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:48.403Z,1528904388.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:48.427Z,1528904388.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:48.812Z,1528904388.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:48.830Z,1528904388.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:49.214Z,1528904389.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:49.232Z,1528904389.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:49.614Z,1528904389.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:49.640Z,1528904389.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:50.017Z,1528904390.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:50.043Z,1528904390.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:50.419Z,1528904390.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:50.438Z,1528904390.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:50.803Z,1528904390.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:50.828Z,1528904390.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:51.208Z,1528904391.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:51.232Z,1528904391.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:51.612Z,1528904391.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:51.630Z,1528904391.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:52.002Z,1528904392.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:52.035Z,1528904392.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:52.419Z,1528904392.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:52.444Z,1528904392.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:52.819Z,1528904392.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:52.837Z,1528904392.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:53.216Z,1528904393.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:53.244Z,1528904393.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:53.607Z,1528904393.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:53.641Z,1528904393.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:53.999Z,1528904393.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:54.027Z,1528904394.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:54.403Z,1528904394.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:54.430Z,1528904394.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:54.804Z,1528904394.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:54.840Z,1528904394.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:55.203Z,1528904395.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:55.231Z,1528904395.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:55.623Z,1528904395.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:55.649Z,1528904395.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:56.023Z,1528904396.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:56.041Z,1528904396.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:56.420Z,1528904396.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:56.438Z,1528904396.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:56.799Z,1528904396.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:56.826Z,1528904396.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:57.203Z,1528904397.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:57.236Z,1528904397.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:57.600Z,1528904397.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:57.628Z,1528904397.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:57.999Z,1528904397.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:58.026Z,1528904398.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:58.420Z,1528904398.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:58.438Z,1528904398.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:58.819Z,1528904398.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:58.836Z,1528904398.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:59.213Z,1528904399.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:59.244Z,1528904399.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:39:59.603Z,1528904399.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:39:59.635Z,1528904399.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:00.003Z,1528904400.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:00.036Z,1528904400.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:00.399Z,1528904400.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:00.432Z,1528904400.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:00.804Z,1528904400.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:00.842Z,1528904400.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:01.203Z,1528904401.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:01.245Z,1528904401.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:01.609Z,1528904401.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:01.644Z,1528904401.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:02.017Z,1528904402.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:02.052Z,1528904402.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:02.413Z,1528904402.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:02.442Z,1528904402.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:02.803Z,1528904402.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:02.837Z,1528904402.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:03.204Z,1528904403.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:03.244Z,1528904403.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:03.607Z,1528904403.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:03.625Z,1528904403.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:04.003Z,1528904404.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:04.021Z,1528904404.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:04.417Z,1528904404.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:04.451Z,1528904404.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:04.817Z,1528904404.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:04.852Z,1528904404.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:05.218Z,1528904405.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:05.250Z,1528904405.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:05.607Z,1528904405.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:05.625Z,1528904405.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:06.006Z,1528904406.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:06.024Z,1528904406.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:06.406Z,1528904406.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:06.424Z,1528904406.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:06.807Z,1528904406.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:06.825Z,1528904406.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:07.206Z,1528904407.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:07.223Z,1528904407.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:07.617Z,1528904407.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:07.650Z,1528904407.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:08.021Z,1528904408.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:08.046Z,1528904408.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:08.416Z,1528904408.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:08.451Z,1528904408.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:08.806Z,1528904408.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:08.824Z,1528904408.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:09.206Z,1528904409.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:09.224Z,1528904409.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:09.606Z,1528904409.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:09.624Z,1528904409.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:10.007Z,1528904410.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:10.025Z,1528904410.025 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:10.025Z,1528904410.025 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 244
2018-06-13T15:40:10.025Z,1528904410.025 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:40:10.027Z,1528904410.027 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:10.027Z,1528904410.027 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 244
2018-06-13T15:40:10.027Z,1528904410.027 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:40:10.045Z,1528904410.045 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:10.045Z,1528904410.045 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 244
2018-06-13T15:40:10.045Z,1528904410.045 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:40:10.121Z,1528904410.121 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:40:10.121Z,1528904410.121 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:40:10.122Z,1528904410.122 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:40:10.410Z,1528904410.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:10.502Z,1528904410.502 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:40:10.502Z,1528904410.502 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 244
2018-06-13T15:40:10.503Z,1528904410.503 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:40:10.503Z,1528904410.503 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 244
2018-06-13T15:40:10.503Z,1528904410.503 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:40:10.503Z,1528904410.503 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 244
2018-06-13T15:40:10.813Z,1528904410.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:10.835Z,1528904410.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:40:10.835Z,1528904410.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:40:10.835Z,1528904410.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:40:10.836Z,1528904410.836 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:40:10.836Z,1528904410.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:40:10.836Z,1528904410.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:40:10.861Z,1528904410.861 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:40:10.862Z,1528904410.862 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:40:10.862Z,1528904410.862 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:40:11.214Z,1528904411.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:11.236Z,1528904411.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:40:11.237Z,1528904411.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:11.607Z,1528904411.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:11.638Z,1528904411.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:40:11.639Z,1528904411.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:12.010Z,1528904412.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:12.028Z,1528904412.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:40:12.029Z,1528904412.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:12.414Z,1528904412.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:12.436Z,1528904412.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:40:12.437Z,1528904412.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:12.817Z,1528904412.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:12.835Z,1528904412.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:40:12.836Z,1528904412.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:13.217Z,1528904413.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:13.239Z,1528904413.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:40:13.240Z,1528904413.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:13.610Z,1528904413.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:13.627Z,1528904413.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:40:13.628Z,1528904413.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:14.007Z,1528904414.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:14.030Z,1528904414.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:40:14.031Z,1528904414.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:14.417Z,1528904414.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:14.435Z,1528904414.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:40:14.435Z,1528904414.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:14.817Z,1528904414.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:14.835Z,1528904414.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:40:14.836Z,1528904414.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:15.217Z,1528904415.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:15.235Z,1528904415.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:40:15.236Z,1528904415.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:15.609Z,1528904415.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:15.627Z,1528904415.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:40:15.627Z,1528904415.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:16.009Z,1528904416.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:16.032Z,1528904416.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:40:16.033Z,1528904416.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:16.414Z,1528904416.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:16.436Z,1528904416.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:40:16.437Z,1528904416.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:16.818Z,1528904416.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:16.836Z,1528904416.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:40:16.836Z,1528904416.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:17.213Z,1528904417.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:17.231Z,1528904417.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:40:17.232Z,1528904417.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:17.602Z,1528904417.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:17.631Z,1528904417.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:40:17.632Z,1528904417.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:18.007Z,1528904418.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:18.032Z,1528904418.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:40:18.033Z,1528904418.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:18.419Z,1528904418.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:18.444Z,1528904418.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:40:18.461Z,1528904418.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:18.819Z,1528904418.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:18.836Z,1528904418.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:40:18.838Z,1528904418.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:19.219Z,1528904419.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:19.236Z,1528904419.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:40:19.237Z,1528904419.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:19.614Z,1528904419.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:19.632Z,1528904419.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:40:19.633Z,1528904419.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:20.013Z,1528904420.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:20.031Z,1528904420.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:40:20.031Z,1528904420.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:23.140Z,1528904423.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:23.169Z,1528904423.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-06-13T15:40:23.170Z,1528904423.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:23.308Z,1528904423.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:23.344Z,1528904423.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T15:40:23.364Z,1528904423.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:23.693Z,1528904423.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:23.720Z,1528904423.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T15:40:23.721Z,1528904423.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:24.084Z,1528904424.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:24.122Z,1528904424.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T15:40:24.123Z,1528904424.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:24.479Z,1528904424.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:24.496Z,1528904424.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T15:40:24.513Z,1528904424.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:24.880Z,1528904424.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:24.898Z,1528904424.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T15:40:24.899Z,1528904424.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:25.279Z,1528904425.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:25.296Z,1528904425.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T15:40:25.297Z,1528904425.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:25.693Z,1528904425.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:25.727Z,1528904425.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T15:40:25.728Z,1528904425.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:26.097Z,1528904426.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:26.131Z,1528904426.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T15:40:26.132Z,1528904426.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:26.499Z,1528904426.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:26.527Z,1528904426.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T15:40:26.528Z,1528904426.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:26.883Z,1528904426.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:26.924Z,1528904426.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T15:40:26.929Z,1528904426.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:27.283Z,1528904427.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:27.308Z,1528904427.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T15:40:27.329Z,1528904427.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:27.684Z,1528904427.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:27.707Z,1528904427.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T15:40:27.708Z,1528904427.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:28.082Z,1528904428.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:28.100Z,1528904428.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T15:40:28.101Z,1528904428.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:28.489Z,1528904428.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:28.507Z,1528904428.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T15:40:28.508Z,1528904428.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:28.893Z,1528904428.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:28.911Z,1528904428.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T15:40:28.912Z,1528904428.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:29.294Z,1528904429.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:29.332Z,1528904429.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T15:40:29.337Z,1528904429.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:29.686Z,1528904429.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:29.704Z,1528904429.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T15:40:29.705Z,1528904429.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:30.085Z,1528904430.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:30.103Z,1528904430.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:30.483Z,1528904430.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:30.501Z,1528904430.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:30.884Z,1528904430.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:30.902Z,1528904430.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:31.286Z,1528904431.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:31.304Z,1528904431.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:31.690Z,1528904431.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:31.709Z,1528904431.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:32.093Z,1528904432.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:32.111Z,1528904432.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:32.493Z,1528904432.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:32.512Z,1528904432.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:32.884Z,1528904432.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:32.902Z,1528904432.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:33.285Z,1528904433.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:33.303Z,1528904433.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:33.684Z,1528904433.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:33.728Z,1528904433.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:34.084Z,1528904434.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:34.102Z,1528904434.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:34.489Z,1528904434.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:34.507Z,1528904434.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:34.893Z,1528904434.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:34.911Z,1528904434.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:35.290Z,1528904435.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:35.307Z,1528904435.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:35.679Z,1528904435.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:35.711Z,1528904435.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:36.084Z,1528904436.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:36.122Z,1528904436.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:36.487Z,1528904436.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:36.507Z,1528904436.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:36.883Z,1528904436.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:36.915Z,1528904436.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:37.287Z,1528904437.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:37.305Z,1528904437.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:37.690Z,1528904437.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:37.708Z,1528904437.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:38.094Z,1528904438.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:38.112Z,1528904438.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:38.495Z,1528904438.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:38.539Z,1528904438.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:38.878Z,1528904438.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:38.913Z,1528904438.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:39.283Z,1528904439.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:39.314Z,1528904439.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:39.683Z,1528904439.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:39.708Z,1528904439.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:40.085Z,1528904440.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:40.103Z,1528904440.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:40.494Z,1528904440.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:40.514Z,1528904440.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:40.895Z,1528904440.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:40.913Z,1528904440.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:41.293Z,1528904441.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:41.312Z,1528904441.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:41.683Z,1528904441.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:41.705Z,1528904441.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:42.086Z,1528904442.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:42.104Z,1528904442.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:42.485Z,1528904442.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:42.503Z,1528904442.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:42.886Z,1528904442.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:42.903Z,1528904442.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:43.286Z,1528904443.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:43.310Z,1528904443.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:43.691Z,1528904443.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:43.709Z,1528904443.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:44.095Z,1528904444.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:44.112Z,1528904444.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:44.494Z,1528904444.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:44.520Z,1528904444.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:44.878Z,1528904444.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:44.910Z,1528904444.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:45.283Z,1528904445.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:45.307Z,1528904445.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:45.686Z,1528904445.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:45.704Z,1528904445.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:46.085Z,1528904446.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:46.103Z,1528904446.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:46.494Z,1528904446.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:46.512Z,1528904446.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:46.894Z,1528904446.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:46.912Z,1528904446.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:47.294Z,1528904447.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:47.317Z,1528904447.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:47.683Z,1528904447.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:47.706Z,1528904447.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:48.087Z,1528904448.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:48.105Z,1528904448.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:48.485Z,1528904448.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:48.503Z,1528904448.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:48.883Z,1528904448.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:48.906Z,1528904448.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:49.283Z,1528904449.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:49.308Z,1528904449.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:49.694Z,1528904449.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:49.712Z,1528904449.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:50.095Z,1528904450.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:50.112Z,1528904450.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:50.494Z,1528904450.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:50.520Z,1528904450.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:50.885Z,1528904450.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:50.908Z,1528904450.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:51.283Z,1528904451.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:51.306Z,1528904451.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:51.683Z,1528904451.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:51.708Z,1528904451.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:52.079Z,1528904452.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:52.103Z,1528904452.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:52.494Z,1528904452.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:52.512Z,1528904452.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:52.895Z,1528904452.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:52.913Z,1528904452.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:53.292Z,1528904453.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:53.316Z,1528904453.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:53.683Z,1528904453.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:53.706Z,1528904453.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:54.083Z,1528904454.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:54.108Z,1528904454.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:54.491Z,1528904454.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:54.508Z,1528904454.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:54.894Z,1528904454.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:54.912Z,1528904454.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:55.294Z,1528904455.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:55.320Z,1528904455.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:55.679Z,1528904455.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:55.702Z,1528904455.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:56.085Z,1528904456.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:56.102Z,1528904456.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:56.483Z,1528904456.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:56.516Z,1528904456.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:56.876Z,1528904456.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:56.912Z,1528904456.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:57.284Z,1528904457.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:57.302Z,1528904457.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:57.699Z,1528904457.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:57.718Z,1528904457.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:58.095Z,1528904458.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:58.113Z,1528904458.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:58.495Z,1528904458.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:58.513Z,1528904458.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:58.886Z,1528904458.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:58.904Z,1528904458.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:59.285Z,1528904459.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:59.303Z,1528904459.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:40:59.675Z,1528904459.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:40:59.710Z,1528904459.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:00.079Z,1528904460.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:00.108Z,1528904460.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:00.495Z,1528904460.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:00.513Z,1528904460.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:00.898Z,1528904460.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:00.916Z,1528904460.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:01.304Z,1528904461.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:01.323Z,1528904461.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:01.676Z,1528904461.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:01.714Z,1528904461.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:02.078Z,1528904462.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:02.112Z,1528904462.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:02.493Z,1528904462.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:02.523Z,1528904462.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:02.893Z,1528904462.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:02.928Z,1528904462.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:03.290Z,1528904463.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:03.317Z,1528904463.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:03.680Z,1528904463.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:03.714Z,1528904463.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:04.075Z,1528904464.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:04.093Z,1528904464.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:04.490Z,1528904464.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:04.527Z,1528904464.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:04.893Z,1528904464.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:04.922Z,1528904464.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:05.285Z,1528904465.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:05.323Z,1528904465.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:05.683Z,1528904465.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:05.701Z,1528904465.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:06.082Z,1528904466.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:06.100Z,1528904466.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:06.490Z,1528904466.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:06.530Z,1528904466.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:06.893Z,1528904466.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:06.927Z,1528904466.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:07.297Z,1528904467.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:07.331Z,1528904467.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:07.685Z,1528904467.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:07.708Z,1528904467.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:08.086Z,1528904468.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:08.103Z,1528904468.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:08.494Z,1528904468.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:08.512Z,1528904468.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:08.890Z,1528904468.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:08.912Z,1528904468.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:09.290Z,1528904469.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:09.308Z,1528904469.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:09.686Z,1528904469.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:09.704Z,1528904469.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:10.084Z,1528904470.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:10.103Z,1528904470.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:10.489Z,1528904470.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:10.508Z,1528904470.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:10.893Z,1528904470.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:10.916Z,1528904470.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:11.292Z,1528904471.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:11.310Z,1528904471.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:11.683Z,1528904471.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:11.715Z,1528904471.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:12.083Z,1528904472.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:12.114Z,1528904472.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:12.491Z,1528904472.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:12.510Z,1528904472.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:12.894Z,1528904472.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:12.916Z,1528904472.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:13.296Z,1528904473.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:13.315Z,1528904473.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:13.679Z,1528904473.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:13.704Z,1528904473.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:14.086Z,1528904474.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:14.104Z,1528904474.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:14.497Z,1528904474.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:14.515Z,1528904474.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:14.895Z,1528904474.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:14.951Z,1528904474.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:15.295Z,1528904475.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:15.312Z,1528904475.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:15.687Z,1528904475.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:15.706Z,1528904475.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:16.079Z,1528904476.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:16.119Z,1528904476.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:16.495Z,1528904476.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:16.513Z,1528904476.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:16.896Z,1528904476.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:16.914Z,1528904476.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:17.295Z,1528904477.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:17.313Z,1528904477.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:17.685Z,1528904477.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:17.708Z,1528904477.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:18.086Z,1528904478.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:18.105Z,1528904478.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:18.494Z,1528904478.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:18.516Z,1528904478.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:18.894Z,1528904478.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:18.912Z,1528904478.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:19.294Z,1528904479.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:19.320Z,1528904479.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:19.690Z,1528904479.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:19.708Z,1528904479.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:20.089Z,1528904480.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:20.106Z,1528904480.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:23.205Z,1528904483.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:23.223Z,1528904483.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:23.381Z,1528904483.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:23.408Z,1528904483.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:23.787Z,1528904483.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:23.805Z,1528904483.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:24.168Z,1528904484.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:24.199Z,1528904484.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:24.564Z,1528904484.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:24.604Z,1528904484.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:24.964Z,1528904484.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:25.001Z,1528904485.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:25.363Z,1528904485.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:25.407Z,1528904485.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:25.770Z,1528904485.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:25.809Z,1528904485.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:26.185Z,1528904486.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:26.204Z,1528904486.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:26.585Z,1528904486.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:26.604Z,1528904486.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:26.963Z,1528904486.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:26.998Z,1528904486.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:27.363Z,1528904487.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:27.396Z,1528904487.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:27.764Z,1528904487.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:27.802Z,1528904487.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:28.159Z,1528904488.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:28.198Z,1528904488.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:28.580Z,1528904488.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:28.599Z,1528904488.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:28.989Z,1528904488.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:29.008Z,1528904489.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:29.379Z,1528904489.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:29.398Z,1528904489.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:29.763Z,1528904489.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:29.796Z,1528904489.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:30.163Z,1528904490.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:30.198Z,1528904490.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:30.563Z,1528904490.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:30.599Z,1528904490.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:30.965Z,1528904490.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:30.999Z,1528904490.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:31.363Z,1528904491.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:31.398Z,1528904491.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:31.773Z,1528904491.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:31.808Z,1528904491.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:32.177Z,1528904492.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:32.205Z,1528904492.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:32.577Z,1528904492.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:32.607Z,1528904492.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:32.963Z,1528904492.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:32.982Z,1528904492.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:33.367Z,1528904493.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:33.408Z,1528904493.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:33.767Z,1528904493.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:33.785Z,1528904493.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:34.162Z,1528904494.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:34.180Z,1528904494.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:34.577Z,1528904494.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:34.615Z,1528904494.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:34.977Z,1528904494.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:34.996Z,1528904494.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:35.370Z,1528904495.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:35.392Z,1528904495.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:35.766Z,1528904495.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:35.800Z,1528904495.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:36.169Z,1528904496.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:36.187Z,1528904496.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:36.569Z,1528904496.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:36.587Z,1528904496.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:36.967Z,1528904496.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:36.999Z,1528904496.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:37.369Z,1528904497.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:37.387Z,1528904497.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:37.774Z,1528904497.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:37.801Z,1528904497.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:38.177Z,1528904498.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:38.195Z,1528904498.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:38.577Z,1528904498.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:38.595Z,1528904498.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:38.963Z,1528904498.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:38.986Z,1528904498.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:39.369Z,1528904499.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:39.386Z,1528904499.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:39.771Z,1528904499.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:39.789Z,1528904499.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:40.165Z,1528904500.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:40.183Z,1528904500.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:40.574Z,1528904500.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:40.592Z,1528904500.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:40.978Z,1528904500.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:40.996Z,1528904500.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:41.374Z,1528904501.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:41.396Z,1528904501.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:41.767Z,1528904501.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:41.792Z,1528904501.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:42.170Z,1528904502.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:42.188Z,1528904502.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:42.570Z,1528904502.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:42.587Z,1528904502.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:42.967Z,1528904502.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:42.990Z,1528904502.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:43.367Z,1528904503.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:43.392Z,1528904503.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:43.775Z,1528904503.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:43.793Z,1528904503.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:44.178Z,1528904504.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:44.201Z,1528904504.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:44.578Z,1528904504.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:44.621Z,1528904504.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:44.969Z,1528904504.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:44.987Z,1528904504.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:45.372Z,1528904505.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:45.390Z,1528904505.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:45.771Z,1528904505.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:45.789Z,1528904505.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:46.163Z,1528904506.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:46.186Z,1528904506.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:46.578Z,1528904506.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:46.602Z,1528904506.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:46.978Z,1528904506.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:47.004Z,1528904507.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:47.376Z,1528904507.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:47.394Z,1528904507.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:47.767Z,1528904507.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:47.789Z,1528904507.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:48.170Z,1528904508.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:48.188Z,1528904508.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:48.563Z,1528904508.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:48.586Z,1528904508.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:48.970Z,1528904508.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:48.987Z,1528904508.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:49.367Z,1528904509.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:49.393Z,1528904509.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:49.778Z,1528904509.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:49.796Z,1528904509.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:50.178Z,1528904510.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:50.201Z,1528904510.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:50.578Z,1528904510.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:50.596Z,1528904510.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:50.969Z,1528904510.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:50.987Z,1528904510.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:51.362Z,1528904511.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:51.395Z,1528904511.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:51.770Z,1528904511.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:51.788Z,1528904511.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:52.166Z,1528904512.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:52.184Z,1528904512.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:52.578Z,1528904512.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:52.601Z,1528904512.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:52.979Z,1528904512.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:52.998Z,1528904512.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:53.376Z,1528904513.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:53.400Z,1528904513.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:53.767Z,1528904513.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:53.791Z,1528904513.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:54.167Z,1528904514.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:54.198Z,1528904514.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:54.582Z,1528904514.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:54.601Z,1528904514.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:54.983Z,1528904514.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:55.001Z,1528904515.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:55.382Z,1528904515.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:55.413Z,1528904515.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:55.763Z,1528904515.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:55.805Z,1528904515.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:56.163Z,1528904516.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:56.191Z,1528904516.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:56.563Z,1528904516.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:56.602Z,1528904516.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:56.960Z,1528904516.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:56.995Z,1528904516.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:57.362Z,1528904517.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:57.397Z,1528904517.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:57.778Z,1528904517.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:57.808Z,1528904517.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:58.177Z,1528904518.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:58.209Z,1528904518.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:58.573Z,1528904518.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:58.609Z,1528904518.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:58.964Z,1528904518.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:58.982Z,1528904518.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:59.363Z,1528904519.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:59.381Z,1528904519.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:41:59.768Z,1528904519.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:41:59.786Z,1528904519.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:00.166Z,1528904520.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:00.192Z,1528904520.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:00.577Z,1528904520.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:00.595Z,1528904520.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:00.978Z,1528904520.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:00.996Z,1528904520.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:01.377Z,1528904521.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:01.395Z,1528904521.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:01.769Z,1528904521.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:01.787Z,1528904521.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:02.171Z,1528904522.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:02.188Z,1528904522.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:02.577Z,1528904522.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:02.596Z,1528904522.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:02.974Z,1528904522.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:02.998Z,1528904522.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:03.376Z,1528904523.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:03.393Z,1528904523.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:03.772Z,1528904523.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:03.790Z,1528904523.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:04.163Z,1528904524.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:04.200Z,1528904524.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:04.574Z,1528904524.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:04.596Z,1528904524.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:04.978Z,1528904524.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:04.996Z,1528904524.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:05.374Z,1528904525.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:05.392Z,1528904525.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:05.763Z,1528904525.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:05.783Z,1528904525.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:06.165Z,1528904526.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:06.183Z,1528904526.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:06.573Z,1528904526.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:06.592Z,1528904526.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:06.977Z,1528904526.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:06.996Z,1528904526.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:07.377Z,1528904527.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:07.417Z,1528904527.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:07.770Z,1528904527.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:07.788Z,1528904527.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:08.167Z,1528904528.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:08.189Z,1528904528.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:08.580Z,1528904528.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:08.598Z,1528904528.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:08.974Z,1528904528.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:08.992Z,1528904528.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:09.374Z,1528904529.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:09.396Z,1528904529.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:09.770Z,1528904529.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:09.788Z,1528904529.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:10.163Z,1528904530.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:10.194Z,1528904530.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:10.546Z,1528904530.546 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T15:42:10.547Z,1528904530.547 [NAL9602] Data Fault, FailCount= 2
2018-06-13T15:42:10.547Z,1528904530.547 [NAL9602](ERROR): Data Fault
2018-06-13T15:42:10.571Z,1528904530.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:10.610Z,1528904530.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:10.689Z,1528904530.689 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T15:42:10.942Z,1528904530.942 [NAL9602](INFO): Powering down
2018-06-13T15:42:10.966Z,1528904530.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:11.004Z,1528904531.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:11.364Z,1528904531.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:11.382Z,1528904531.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:11.764Z,1528904531.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:11.782Z,1528904531.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:11.862Z,1528904531.862 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T15:42:11.862Z,1528904531.862 [NAL9602] No Fault, FailCount= 2
2018-06-13T15:42:12.164Z,1528904532.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:12.188Z,1528904532.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:12.564Z,1528904532.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:12.583Z,1528904532.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:12.961Z,1528904532.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:12.994Z,1528904532.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:13.364Z,1528904533.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:13.382Z,1528904533.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:13.764Z,1528904533.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:13.782Z,1528904533.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:14.168Z,1528904534.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:14.186Z,1528904534.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:14.564Z,1528904534.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:14.581Z,1528904534.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:14.968Z,1528904534.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:14.986Z,1528904534.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:15.367Z,1528904535.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:15.390Z,1528904535.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:15.764Z,1528904535.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:15.782Z,1528904535.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:16.168Z,1528904536.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:16.186Z,1528904536.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:16.568Z,1528904536.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:16.586Z,1528904536.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:16.964Z,1528904536.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:16.988Z,1528904536.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:17.364Z,1528904537.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:17.383Z,1528904537.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:17.769Z,1528904537.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:17.787Z,1528904537.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:18.164Z,1528904538.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:18.182Z,1528904538.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:18.568Z,1528904538.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:18.586Z,1528904538.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:18.966Z,1528904538.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:19.000Z,1528904539.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:19.368Z,1528904539.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:19.386Z,1528904539.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:19.772Z,1528904539.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:19.790Z,1528904539.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:20.173Z,1528904540.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:20.191Z,1528904540.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:23.277Z,1528904543.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:23.300Z,1528904543.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:23.433Z,1528904543.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:23.451Z,1528904543.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:23.830Z,1528904543.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:23.848Z,1528904543.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:24.230Z,1528904544.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:24.248Z,1528904544.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:24.628Z,1528904544.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:24.647Z,1528904544.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:25.030Z,1528904545.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:25.048Z,1528904545.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:25.427Z,1528904545.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:25.445Z,1528904545.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:25.830Z,1528904545.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:25.848Z,1528904545.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:26.234Z,1528904546.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:26.252Z,1528904546.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:26.628Z,1528904546.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:26.645Z,1528904546.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:27.030Z,1528904547.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:27.048Z,1528904547.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:27.430Z,1528904547.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:27.448Z,1528904547.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:27.828Z,1528904547.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:27.845Z,1528904547.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:28.234Z,1528904548.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:28.252Z,1528904548.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:28.630Z,1528904548.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:28.648Z,1528904548.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:29.028Z,1528904549.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:29.052Z,1528904549.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:29.428Z,1528904549.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:29.446Z,1528904549.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:29.830Z,1528904549.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:29.848Z,1528904549.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:30.230Z,1528904550.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:30.249Z,1528904550.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:30.630Z,1528904550.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:30.648Z,1528904550.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:31.030Z,1528904551.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:31.048Z,1528904551.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:31.428Z,1528904551.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:31.445Z,1528904551.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:31.830Z,1528904551.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:31.848Z,1528904551.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:32.234Z,1528904552.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:32.252Z,1528904552.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:32.628Z,1528904552.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:32.645Z,1528904552.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:33.031Z,1528904553.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:33.048Z,1528904553.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:33.430Z,1528904553.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:33.448Z,1528904553.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:33.828Z,1528904553.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:33.846Z,1528904553.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:34.234Z,1528904554.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:34.252Z,1528904554.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:34.630Z,1528904554.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:34.648Z,1528904554.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:35.028Z,1528904555.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:35.052Z,1528904555.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:35.431Z,1528904555.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:35.456Z,1528904555.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:35.831Z,1528904555.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:35.848Z,1528904555.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:36.230Z,1528904556.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:36.247Z,1528904556.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:36.631Z,1528904556.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:36.648Z,1528904556.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:37.029Z,1528904557.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:37.047Z,1528904557.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:37.428Z,1528904557.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:37.446Z,1528904557.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:37.835Z,1528904557.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:37.860Z,1528904557.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:38.234Z,1528904558.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:38.252Z,1528904558.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:38.628Z,1528904558.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:38.646Z,1528904558.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:39.033Z,1528904559.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:39.051Z,1528904559.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:39.433Z,1528904559.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:39.451Z,1528904559.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:39.830Z,1528904559.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:39.852Z,1528904559.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:40.235Z,1528904560.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:40.253Z,1528904560.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:40.631Z,1528904560.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:40.672Z,1528904560.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:41.006Z,1528904561.006 [NAL9602](INFO): Powering up NAL9602
2018-06-13T15:42:41.035Z,1528904561.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:41.060Z,1528904561.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:41.433Z,1528904561.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:41.451Z,1528904561.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:41.833Z,1528904561.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:41.852Z,1528904561.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:42.232Z,1528904562.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:42.251Z,1528904562.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:42.633Z,1528904562.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:42.652Z,1528904562.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:43.032Z,1528904563.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:43.051Z,1528904563.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:43.428Z,1528904563.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:43.446Z,1528904563.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:43.832Z,1528904563.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:43.851Z,1528904563.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:44.234Z,1528904564.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:44.252Z,1528904564.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:44.631Z,1528904564.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:44.656Z,1528904564.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:45.032Z,1528904565.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:45.050Z,1528904565.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:45.432Z,1528904565.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:45.451Z,1528904565.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:45.830Z,1528904565.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:45.847Z,1528904565.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:46.234Z,1528904566.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:46.260Z,1528904566.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:46.632Z,1528904566.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:46.651Z,1528904566.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:47.030Z,1528904567.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:47.047Z,1528904567.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:47.426Z,1528904567.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:47.459Z,1528904567.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:47.834Z,1528904567.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:47.852Z,1528904567.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:48.234Z,1528904568.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:48.251Z,1528904568.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:48.630Z,1528904568.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:48.648Z,1528904568.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:49.033Z,1528904569.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:49.051Z,1528904569.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:49.433Z,1528904569.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:49.450Z,1528904569.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:49.829Z,1528904569.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:49.848Z,1528904569.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:50.234Z,1528904570.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:50.253Z,1528904570.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:50.632Z,1528904570.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:50.651Z,1528904570.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:51.028Z,1528904571.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:51.047Z,1528904571.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:51.433Z,1528904571.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:51.457Z,1528904571.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:51.837Z,1528904571.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:51.856Z,1528904571.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:52.218Z,1528904572.218 [NAL9602](INFO): NAL9602 initialized
2018-06-13T15:42:52.235Z,1528904572.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:52.252Z,1528904572.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:52.633Z,1528904572.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:52.650Z,1528904572.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:53.043Z,1528904573.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:53.061Z,1528904573.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:53.443Z,1528904573.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:53.468Z,1528904573.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:53.843Z,1528904573.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:53.861Z,1528904573.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:54.239Z,1528904574.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:54.257Z,1528904574.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:54.627Z,1528904574.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:54.651Z,1528904574.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:55.034Z,1528904575.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:55.052Z,1528904575.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:55.431Z,1528904575.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:55.456Z,1528904575.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:55.840Z,1528904575.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:55.858Z,1528904575.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:56.245Z,1528904576.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:56.263Z,1528904576.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:56.643Z,1528904576.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:56.661Z,1528904576.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:57.033Z,1528904577.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:57.059Z,1528904577.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:57.431Z,1528904577.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:57.454Z,1528904577.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:57.834Z,1528904577.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:57.857Z,1528904577.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:58.243Z,1528904578.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:58.261Z,1528904578.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:58.633Z,1528904578.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:58.651Z,1528904578.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:59.046Z,1528904579.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:59.085Z,1528904579.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:59.442Z,1528904579.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:59.464Z,1528904579.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:42:59.844Z,1528904579.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:42:59.868Z,1528904579.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:00.239Z,1528904580.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:00.258Z,1528904580.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:00.623Z,1528904580.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:00.661Z,1528904580.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:01.028Z,1528904581.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:01.064Z,1528904581.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:01.427Z,1528904581.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:01.456Z,1528904581.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:01.840Z,1528904581.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:01.858Z,1528904581.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:02.248Z,1528904582.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:02.268Z,1528904582.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:02.649Z,1528904582.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:02.667Z,1528904582.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:03.028Z,1528904583.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:03.056Z,1528904583.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:03.427Z,1528904583.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:03.454Z,1528904583.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:03.827Z,1528904583.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:03.857Z,1528904583.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:04.230Z,1528904584.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:04.258Z,1528904584.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:04.627Z,1528904584.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:04.661Z,1528904584.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:05.046Z,1528904585.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:05.064Z,1528904585.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:05.436Z,1528904585.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:05.466Z,1528904585.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:05.842Z,1528904585.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:05.865Z,1528904585.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:06.231Z,1528904586.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:06.268Z,1528904586.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:06.627Z,1528904586.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:06.659Z,1528904586.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:07.027Z,1528904587.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:07.060Z,1528904587.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:07.431Z,1528904587.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:07.468Z,1528904587.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:07.844Z,1528904587.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:07.862Z,1528904587.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:08.252Z,1528904588.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:08.276Z,1528904588.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:08.648Z,1528904588.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:08.667Z,1528904588.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:09.027Z,1528904589.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:09.059Z,1528904589.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:09.431Z,1528904589.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:09.464Z,1528904589.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:09.827Z,1528904589.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:09.868Z,1528904589.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:10.236Z,1528904590.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:10.268Z,1528904590.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:10.631Z,1528904590.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:10.668Z,1528904590.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:11.042Z,1528904591.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:11.072Z,1528904591.072 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:11.072Z,1528904591.072 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 245
2018-06-13T15:43:11.072Z,1528904591.072 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:43:11.074Z,1528904591.074 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:11.074Z,1528904591.074 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 245
2018-06-13T15:43:11.074Z,1528904591.074 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:43:11.076Z,1528904591.076 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:11.076Z,1528904591.076 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 245
2018-06-13T15:43:11.076Z,1528904591.076 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:43:11.157Z,1528904591.157 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:43:11.157Z,1528904591.157 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:43:11.158Z,1528904591.158 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:43:11.441Z,1528904591.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:11.545Z,1528904591.545 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:43:11.545Z,1528904591.545 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 245
2018-06-13T15:43:11.546Z,1528904591.546 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:43:11.546Z,1528904591.546 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 245
2018-06-13T15:43:11.546Z,1528904591.546 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:43:11.546Z,1528904591.546 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 245
2018-06-13T15:43:11.838Z,1528904591.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:11.875Z,1528904591.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:43:11.876Z,1528904591.876 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:43:11.876Z,1528904591.876 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:43:11.876Z,1528904591.876 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:43:11.877Z,1528904591.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:43:11.877Z,1528904591.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:43:11.878Z,1528904591.878 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:43:11.878Z,1528904591.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:43:11.878Z,1528904591.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:43:12.234Z,1528904592.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:12.271Z,1528904592.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:43:12.271Z,1528904592.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:12.627Z,1528904592.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:12.645Z,1528904592.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:43:12.646Z,1528904592.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:13.031Z,1528904593.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:13.049Z,1528904593.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:43:13.050Z,1528904593.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:13.431Z,1528904593.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:13.456Z,1528904593.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:43:13.456Z,1528904593.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:13.846Z,1528904593.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:13.883Z,1528904593.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:43:13.884Z,1528904593.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:14.246Z,1528904594.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:14.263Z,1528904594.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:43:14.264Z,1528904594.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:14.642Z,1528904594.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:14.659Z,1528904594.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:43:14.660Z,1528904594.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:15.027Z,1528904595.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:15.050Z,1528904595.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:43:15.051Z,1528904595.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:15.438Z,1528904595.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:15.456Z,1528904595.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:43:15.457Z,1528904595.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:15.838Z,1528904595.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:15.855Z,1528904595.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:43:15.856Z,1528904595.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:16.239Z,1528904596.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:16.264Z,1528904596.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:43:16.265Z,1528904596.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:16.631Z,1528904596.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:16.660Z,1528904596.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:43:16.665Z,1528904596.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:17.049Z,1528904597.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:17.066Z,1528904597.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:43:17.067Z,1528904597.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:17.448Z,1528904597.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:17.466Z,1528904597.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:43:17.467Z,1528904597.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:17.844Z,1528904597.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:17.862Z,1528904597.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:43:17.862Z,1528904597.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:18.227Z,1528904598.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:18.269Z,1528904598.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:43:18.270Z,1528904598.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:18.631Z,1528904598.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:18.660Z,1528904598.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:43:18.662Z,1528904598.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:19.032Z,1528904599.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:19.052Z,1528904599.052 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T15:43:19.052Z,1528904599.052 [BPC1] Communications Fault, FailCount= 6
2018-06-13T15:43:19.052Z,1528904599.052 [BPC1](ERROR): Communications Fault
2018-06-13T15:43:19.061Z,1528904599.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:43:19.062Z,1528904599.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:19.145Z,1528904599.145 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T15:43:19.429Z,1528904599.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:19.459Z,1528904599.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:43:19.460Z,1528904599.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:19.849Z,1528904599.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:19.866Z,1528904599.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:43:19.867Z,1528904599.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:20.246Z,1528904600.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:20.275Z,1528904600.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:43:20.276Z,1528904600.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:20.288Z,1528904600.288 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T15:38:20.2Z
2018-06-13T15:43:20.288Z,1528904600.288 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T15:43:20.288Z,1528904600.288 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T15:43:20.369Z,1528904600.369 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T15:43:20.369Z,1528904600.369 [BPC1] No Fault, FailCount= 6
2018-06-13T15:43:23.366Z,1528904603.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:23.442Z,1528904603.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T15:43:23.443Z,1528904603.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:24.484Z,1528904604.484 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0284.lzma
2018-06-13T15:43:24.514Z,1528904604.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:24.532Z,1528904604.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-06-13T15:43:24.533Z,1528904604.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:24.643Z,1528904604.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:24.674Z,1528904604.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T15:43:24.675Z,1528904604.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:25.025Z,1528904605.025 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0284.lzma.bak
2018-06-13T15:43:25.025Z,1528904605.025 [DataOverHttps](INFO): SBD MOMSN=8329477
2018-06-13T15:43:25.074Z,1528904605.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:25.100Z,1528904605.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T15:43:25.105Z,1528904605.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:26.946Z,1528904606.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:26.972Z,1528904606.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T15:43:26.973Z,1528904606.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:27.098Z,1528904607.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:27.136Z,1528904607.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T15:43:27.141Z,1528904607.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:27.496Z,1528904607.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:27.526Z,1528904607.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T15:43:27.527Z,1528904607.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:27.896Z,1528904607.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:27.930Z,1528904607.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T15:43:27.930Z,1528904607.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:28.295Z,1528904608.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:28.313Z,1528904608.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:43:28.314Z,1528904608.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:31.446Z,1528904611.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:31.464Z,1528904611.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:31.614Z,1528904611.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:31.644Z,1528904611.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:32.020Z,1528904612.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:32.047Z,1528904612.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:32.411Z,1528904612.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:32.428Z,1528904612.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:32.809Z,1528904612.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:32.832Z,1528904612.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:33.210Z,1528904613.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:33.232Z,1528904613.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:33.610Z,1528904613.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:33.628Z,1528904613.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:34.016Z,1528904614.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:34.034Z,1528904614.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:34.422Z,1528904614.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:34.440Z,1528904614.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:34.823Z,1528904614.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:34.848Z,1528904614.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:35.200Z,1528904615.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:35.231Z,1528904615.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:35.610Z,1528904615.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:35.627Z,1528904615.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:36.012Z,1528904616.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:36.030Z,1528904616.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:36.399Z,1528904616.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:36.436Z,1528904616.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:36.818Z,1528904616.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:36.877Z,1528904616.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:40.882Z,1528904620.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:40.900Z,1528904620.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:40.985Z,1528904620.985 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180613T032335/Express0285.lzma
2018-06-13T15:43:41.018Z,1528904621.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:41.064Z,1528904621.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:41.411Z,1528904621.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:41.450Z,1528904621.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:41.787Z,1528904621.787 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0285.lzma.bak
2018-06-13T15:43:41.787Z,1528904621.787 [DataOverHttps](INFO): SBD MOMSN=8329479
2018-06-13T15:43:41.869Z,1528904621.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:41.995Z,1528904621.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:43.703Z,1528904623.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:43.741Z,1528904623.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:43.744Z,1528904623.744 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T15:43:43.744Z,1528904623.744 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T15:43:43.744Z,1528904623.744 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T15:43:43.863Z,1528904623.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:43.904Z,1528904623.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:46.998Z,1528904626.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:47.020Z,1528904627.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:47.181Z,1528904627.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:47.218Z,1528904627.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:47.581Z,1528904627.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:47.615Z,1528904627.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:47.971Z,1528904627.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:47.988Z,1528904627.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:48.369Z,1528904628.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:48.392Z,1528904628.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:48.774Z,1528904628.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:48.792Z,1528904628.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:49.174Z,1528904629.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:49.210Z,1528904629.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:49.574Z,1528904629.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:49.596Z,1528904629.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:49.967Z,1528904629.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:49.990Z,1528904629.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:50.369Z,1528904630.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:50.387Z,1528904630.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:50.774Z,1528904630.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:50.792Z,1528904630.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:51.178Z,1528904631.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:51.196Z,1528904631.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:51.577Z,1528904631.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:51.600Z,1528904631.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:51.970Z,1528904631.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:51.988Z,1528904631.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:52.367Z,1528904632.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:52.389Z,1528904632.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:52.777Z,1528904632.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:52.800Z,1528904632.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:53.177Z,1528904633.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:53.196Z,1528904633.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:53.574Z,1528904633.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:53.596Z,1528904633.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:53.971Z,1528904633.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:53.989Z,1528904633.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:54.362Z,1528904634.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:54.388Z,1528904634.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:54.779Z,1528904634.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:54.797Z,1528904634.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:55.182Z,1528904635.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:55.199Z,1528904635.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:55.579Z,1528904635.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:55.597Z,1528904635.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:55.968Z,1528904635.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:55.998Z,1528904635.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:56.359Z,1528904636.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:56.396Z,1528904636.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:56.780Z,1528904636.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:56.798Z,1528904636.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:57.182Z,1528904637.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:57.207Z,1528904637.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:57.583Z,1528904637.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:57.601Z,1528904637.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:57.964Z,1528904637.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:58.005Z,1528904638.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:58.363Z,1528904638.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:58.395Z,1528904638.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:58.788Z,1528904638.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:58.806Z,1528904638.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:59.182Z,1528904639.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:59.200Z,1528904639.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:59.579Z,1528904639.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:59.597Z,1528904639.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:43:59.963Z,1528904639.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:43:59.996Z,1528904639.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:00.363Z,1528904640.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:00.400Z,1528904640.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:00.780Z,1528904640.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:00.798Z,1528904640.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:01.183Z,1528904641.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:01.201Z,1528904641.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:01.579Z,1528904641.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:01.597Z,1528904641.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:01.964Z,1528904641.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:01.995Z,1528904641.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:02.363Z,1528904642.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:02.407Z,1528904642.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:02.785Z,1528904642.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:02.803Z,1528904642.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:03.182Z,1528904643.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:03.199Z,1528904643.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:03.584Z,1528904643.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:03.601Z,1528904643.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:03.964Z,1528904643.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:03.995Z,1528904643.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:04.363Z,1528904644.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:04.396Z,1528904644.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:04.784Z,1528904644.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:04.802Z,1528904644.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:05.183Z,1528904645.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:05.200Z,1528904645.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:05.587Z,1528904645.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:05.604Z,1528904645.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:05.964Z,1528904645.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:05.000Z,1528904646.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:06.363Z,1528904646.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:06.400Z,1528904646.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:06.779Z,1528904646.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:06.797Z,1528904646.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:07.184Z,1528904647.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:07.208Z,1528904647.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:07.581Z,1528904647.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:07.599Z,1528904647.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:07.964Z,1528904647.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:07.995Z,1528904647.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:08.363Z,1528904648.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:08.396Z,1528904648.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:08.784Z,1528904648.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:08.802Z,1528904648.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:09.183Z,1528904649.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:09.200Z,1528904649.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:09.585Z,1528904649.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:09.602Z,1528904649.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:09.968Z,1528904649.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:09.995Z,1528904649.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:10.367Z,1528904650.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:10.394Z,1528904650.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:10.784Z,1528904650.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:10.802Z,1528904650.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:11.188Z,1528904651.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:11.205Z,1528904651.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:11.584Z,1528904651.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:11.602Z,1528904651.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:11.964Z,1528904651.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:11.996Z,1528904651.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:12.364Z,1528904652.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:12.394Z,1528904652.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:12.778Z,1528904652.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:12.801Z,1528904652.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:13.182Z,1528904653.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:13.206Z,1528904653.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:13.580Z,1528904653.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:13.598Z,1528904653.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:13.967Z,1528904653.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:13.996Z,1528904653.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:14.363Z,1528904654.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:14.400Z,1528904654.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:14.780Z,1528904654.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:14.798Z,1528904654.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:15.183Z,1528904655.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:15.202Z,1528904655.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:15.584Z,1528904655.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:15.608Z,1528904655.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:15.968Z,1528904655.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:16.003Z,1528904656.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:16.363Z,1528904656.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:16.399Z,1528904656.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:16.784Z,1528904656.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:16.802Z,1528904656.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:17.180Z,1528904657.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:17.199Z,1528904657.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:17.575Z,1528904657.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:17.699Z,1528904657.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:17.959Z,1528904657.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:17.988Z,1528904657.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:18.372Z,1528904658.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:18.430Z,1528904658.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:18.766Z,1528904658.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:18.821Z,1528904658.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:19.176Z,1528904659.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:19.194Z,1528904659.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:19.577Z,1528904659.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:19.595Z,1528904659.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:19.973Z,1528904659.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:19.991Z,1528904659.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:20.369Z,1528904660.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:20.387Z,1528904660.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:20.768Z,1528904660.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:20.786Z,1528904660.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:21.168Z,1528904661.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:21.193Z,1528904661.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:21.569Z,1528904661.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:21.586Z,1528904661.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:21.971Z,1528904661.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:21.989Z,1528904661.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:22.378Z,1528904662.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:22.396Z,1528904662.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:22.778Z,1528904662.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:22.795Z,1528904662.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:23.167Z,1528904663.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:23.192Z,1528904663.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:23.567Z,1528904663.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:23.592Z,1528904663.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:23.968Z,1528904663.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:24.028Z,1528904664.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:24.368Z,1528904664.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:24.387Z,1528904664.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:24.768Z,1528904664.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:24.786Z,1528904664.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:25.177Z,1528904665.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:25.217Z,1528904665.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:25.577Z,1528904665.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:25.595Z,1528904665.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:25.978Z,1528904665.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:25.996Z,1528904665.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:26.370Z,1528904666.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:26.387Z,1528904666.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:26.770Z,1528904666.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:26.788Z,1528904666.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:27.167Z,1528904667.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:27.198Z,1528904667.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:27.570Z,1528904667.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:27.592Z,1528904667.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:27.974Z,1528904667.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:27.996Z,1528904667.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:28.377Z,1528904668.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:28.395Z,1528904668.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:28.778Z,1528904668.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:28.796Z,1528904668.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:29.169Z,1528904669.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:29.187Z,1528904669.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:29.567Z,1528904669.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:29.603Z,1528904669.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:29.967Z,1528904669.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:30.008Z,1528904670.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:30.366Z,1528904670.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:30.390Z,1528904670.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:30.758Z,1528904670.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:30.805Z,1528904670.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:31.182Z,1528904671.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:31.208Z,1528904671.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:31.583Z,1528904671.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:31.601Z,1528904671.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:31.979Z,1528904671.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:31.997Z,1528904671.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:32.363Z,1528904672.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:32.391Z,1528904672.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:32.763Z,1528904672.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:32.790Z,1528904672.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:33.164Z,1528904673.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:33.199Z,1528904673.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:33.563Z,1528904673.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:33.592Z,1528904673.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:33.979Z,1528904673.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:33.998Z,1528904673.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:34.383Z,1528904674.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:34.401Z,1528904674.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:34.784Z,1528904674.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:34.801Z,1528904674.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:35.163Z,1528904675.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:35.196Z,1528904675.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:35.573Z,1528904675.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:35.591Z,1528904675.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:35.963Z,1528904675.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:35.991Z,1528904675.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:36.364Z,1528904676.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:36.396Z,1528904676.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:36.763Z,1528904676.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:36.799Z,1528904676.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:37.187Z,1528904677.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:37.212Z,1528904677.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:37.583Z,1528904677.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:37.601Z,1528904677.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:37.979Z,1528904677.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:37.997Z,1528904677.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:38.363Z,1528904678.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:38.397Z,1528904678.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:38.763Z,1528904678.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:38.796Z,1528904678.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:39.174Z,1528904679.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:39.192Z,1528904679.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:39.559Z,1528904679.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:39.600Z,1528904679.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:39.979Z,1528904679.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:39.998Z,1528904679.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:40.387Z,1528904680.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:40.406Z,1528904680.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:40.783Z,1528904680.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:40.808Z,1528904680.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:41.164Z,1528904681.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:41.195Z,1528904681.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:41.563Z,1528904681.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:41.603Z,1528904681.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:41.967Z,1528904681.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:41.996Z,1528904681.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:42.364Z,1528904682.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:42.395Z,1528904682.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:42.763Z,1528904682.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:42.799Z,1528904682.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:43.185Z,1528904683.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:43.209Z,1528904683.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:43.584Z,1528904683.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:43.620Z,1528904683.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:43.983Z,1528904683.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:44.001Z,1528904684.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:44.363Z,1528904684.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:44.401Z,1528904684.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:44.767Z,1528904684.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:44.799Z,1528904684.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:45.167Z,1528904685.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:45.200Z,1528904685.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:45.563Z,1528904685.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:45.601Z,1528904685.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:45.977Z,1528904685.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:46.012Z,1528904686.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:46.377Z,1528904686.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:46.412Z,1528904686.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:46.777Z,1528904686.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:46.805Z,1528904686.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:47.164Z,1528904687.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:47.201Z,1528904687.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:47.567Z,1528904687.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:47.584Z,1528904687.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:50.672Z,1528904690.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:50.715Z,1528904690.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:50.827Z,1528904690.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:50.864Z,1528904690.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:51.245Z,1528904691.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:51.263Z,1528904691.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:51.651Z,1528904691.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:51.674Z,1528904691.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:52.034Z,1528904692.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:52.068Z,1528904692.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:52.423Z,1528904692.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:52.456Z,1528904692.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:52.819Z,1528904692.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:52.836Z,1528904692.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:53.224Z,1528904693.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:53.264Z,1528904693.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:53.623Z,1528904693.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:53.660Z,1528904693.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:54.033Z,1528904694.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:54.076Z,1528904694.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:54.434Z,1528904694.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:54.472Z,1528904694.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:54.834Z,1528904694.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:54.872Z,1528904694.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:55.223Z,1528904695.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:55.241Z,1528904695.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:55.627Z,1528904695.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:55.646Z,1528904695.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:56.027Z,1528904696.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:56.064Z,1528904696.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:56.427Z,1528904696.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:56.476Z,1528904696.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:56.826Z,1528904696.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:56.845Z,1528904696.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:57.242Z,1528904697.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:57.280Z,1528904697.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:57.638Z,1528904697.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:57.678Z,1528904697.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:58.039Z,1528904698.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:58.074Z,1528904698.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:58.426Z,1528904698.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:58.444Z,1528904698.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:58.826Z,1528904698.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:58.844Z,1528904698.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:59.226Z,1528904699.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:59.244Z,1528904699.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:44:59.626Z,1528904699.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:44:59.644Z,1528904699.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:00.037Z,1528904700.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:00.076Z,1528904700.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:00.436Z,1528904700.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:00.474Z,1528904700.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:00.838Z,1528904700.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:00.855Z,1528904700.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:01.228Z,1528904701.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:01.246Z,1528904701.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:01.626Z,1528904701.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:01.644Z,1528904701.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:02.030Z,1528904702.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:02.048Z,1528904702.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:02.426Z,1528904702.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:02.444Z,1528904702.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:02.825Z,1528904702.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:02.844Z,1528904702.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:03.238Z,1528904703.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:03.255Z,1528904703.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:03.639Z,1528904703.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:03.657Z,1528904703.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:04.038Z,1528904704.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:04.072Z,1528904704.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:04.434Z,1528904704.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:04.452Z,1528904704.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:04.830Z,1528904704.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:04.849Z,1528904704.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:05.223Z,1528904705.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:05.249Z,1528904705.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:05.631Z,1528904705.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:05.649Z,1528904705.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:06.039Z,1528904706.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:06.057Z,1528904706.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:06.439Z,1528904706.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:06.464Z,1528904706.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:06.839Z,1528904706.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:06.856Z,1528904706.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:07.226Z,1528904707.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:07.244Z,1528904707.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:07.630Z,1528904707.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:07.656Z,1528904707.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:08.033Z,1528904708.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:08.053Z,1528904708.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:08.430Z,1528904708.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:08.448Z,1528904708.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:08.823Z,1528904708.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:08.846Z,1528904708.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:09.238Z,1528904709.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:09.263Z,1528904709.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:09.640Z,1528904709.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:09.670Z,1528904709.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:10.039Z,1528904710.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:10.057Z,1528904710.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:10.427Z,1528904710.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:10.450Z,1528904710.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:10.829Z,1528904710.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:10.847Z,1528904710.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:11.219Z,1528904711.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:11.255Z,1528904711.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:11.623Z,1528904711.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:11.660Z,1528904711.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:12.044Z,1528904712.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:12.068Z,1528904712.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:12.440Z,1528904712.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:12.458Z,1528904712.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:12.839Z,1528904712.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:12.857Z,1528904712.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:13.223Z,1528904713.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:13.251Z,1528904713.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:13.619Z,1528904713.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:13.654Z,1528904713.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:14.033Z,1528904714.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:14.051Z,1528904714.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:14.423Z,1528904714.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:14.453Z,1528904714.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:14.819Z,1528904714.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:14.846Z,1528904714.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:15.243Z,1528904715.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:15.261Z,1528904715.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:15.644Z,1528904715.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:15.661Z,1528904715.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:16.039Z,1528904716.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:16.057Z,1528904716.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:16.423Z,1528904716.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:16.457Z,1528904716.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:16.819Z,1528904716.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:16.852Z,1528904716.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:17.235Z,1528904717.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:17.253Z,1528904717.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:17.623Z,1528904717.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:17.660Z,1528904717.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:18.044Z,1528904718.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:18.061Z,1528904718.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:18.443Z,1528904718.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:18.468Z,1528904718.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:18.843Z,1528904718.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:18.862Z,1528904718.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:19.223Z,1528904719.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:19.252Z,1528904719.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:19.623Z,1528904719.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:19.650Z,1528904719.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:20.027Z,1528904720.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:20.055Z,1528904720.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:20.427Z,1528904720.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:20.455Z,1528904720.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:20.823Z,1528904720.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:20.858Z,1528904720.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:21.243Z,1528904721.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:21.262Z,1528904721.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:21.638Z,1528904721.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:21.660Z,1528904721.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:22.044Z,1528904722.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:22.069Z,1528904722.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:22.427Z,1528904722.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:22.472Z,1528904722.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:22.823Z,1528904722.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:22.851Z,1528904722.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:23.224Z,1528904723.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:23.251Z,1528904723.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:23.626Z,1528904723.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:23.656Z,1528904723.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:24.046Z,1528904724.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:24.063Z,1528904724.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:24.440Z,1528904724.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:24.458Z,1528904724.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:24.840Z,1528904724.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:24.858Z,1528904724.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:25.226Z,1528904725.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:25.255Z,1528904725.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:25.627Z,1528904725.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:25.654Z,1528904725.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:26.023Z,1528904726.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:26.061Z,1528904726.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:26.424Z,1528904726.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:26.460Z,1528904726.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:26.822Z,1528904726.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:26.860Z,1528904726.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:27.247Z,1528904727.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:27.265Z,1528904727.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:27.643Z,1528904727.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:27.666Z,1528904727.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:28.039Z,1528904728.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:28.065Z,1528904728.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:28.426Z,1528904728.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:28.453Z,1528904728.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:28.829Z,1528904728.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:28.858Z,1528904728.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:29.224Z,1528904729.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:29.255Z,1528904729.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:29.623Z,1528904729.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:29.656Z,1528904729.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:30.049Z,1528904730.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:30.067Z,1528904730.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:30.443Z,1528904730.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:30.461Z,1528904730.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:30.845Z,1528904730.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:30.862Z,1528904730.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:31.223Z,1528904731.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:31.260Z,1528904731.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:31.620Z,1528904731.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:31.656Z,1528904731.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:32.030Z,1528904732.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:32.057Z,1528904732.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:32.424Z,1528904732.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:32.455Z,1528904732.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:32.823Z,1528904732.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:32.857Z,1528904732.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:33.243Z,1528904733.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:33.265Z,1528904733.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:33.637Z,1528904733.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:33.667Z,1528904733.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:34.038Z,1528904734.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:34.065Z,1528904734.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:34.427Z,1528904734.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:34.496Z,1528904734.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:34.826Z,1528904734.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:34.872Z,1528904734.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:35.226Z,1528904735.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:35.244Z,1528904735.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:35.629Z,1528904735.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:35.663Z,1528904735.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:36.038Z,1528904736.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:36.076Z,1528904736.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:36.440Z,1528904736.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:36.474Z,1528904736.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:36.839Z,1528904736.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:36.878Z,1528904736.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:37.230Z,1528904737.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:37.249Z,1528904737.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:37.630Z,1528904737.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:37.650Z,1528904737.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:38.028Z,1528904738.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:38.050Z,1528904738.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:38.431Z,1528904738.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:38.449Z,1528904738.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:38.827Z,1528904738.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:38.857Z,1528904738.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:39.246Z,1528904739.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:39.283Z,1528904739.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:39.640Z,1528904739.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:39.658Z,1528904739.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:40.037Z,1528904740.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:40.060Z,1528904740.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:40.430Z,1528904740.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:40.460Z,1528904740.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:40.833Z,1528904740.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:40.851Z,1528904740.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:41.223Z,1528904741.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:41.278Z,1528904741.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:41.636Z,1528904741.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:41.675Z,1528904741.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:42.041Z,1528904742.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:42.059Z,1528904742.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:42.438Z,1528904742.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:42.464Z,1528904742.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:42.842Z,1528904742.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:42.860Z,1528904742.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:43.228Z,1528904743.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:43.261Z,1528904743.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:43.630Z,1528904743.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:43.654Z,1528904743.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:44.038Z,1528904744.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:44.056Z,1528904744.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:44.423Z,1528904744.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:44.458Z,1528904744.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:44.836Z,1528904744.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:44.864Z,1528904744.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:45.245Z,1528904745.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:45.264Z,1528904745.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:45.648Z,1528904745.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:45.667Z,1528904745.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:46.047Z,1528904746.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:46.066Z,1528904746.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:46.427Z,1528904746.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:46.460Z,1528904746.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:46.829Z,1528904746.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:46.866Z,1528904746.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:47.226Z,1528904747.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:47.264Z,1528904747.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:47.627Z,1528904747.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:47.664Z,1528904747.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:48.046Z,1528904748.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:48.071Z,1528904748.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:51.154Z,1528904751.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:51.172Z,1528904751.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:51.312Z,1528904751.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:51.331Z,1528904751.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:51.687Z,1528904751.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:51.717Z,1528904751.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:52.084Z,1528904752.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:52.111Z,1528904752.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:52.487Z,1528904752.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:52.515Z,1528904752.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:52.879Z,1528904752.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:52.916Z,1528904752.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:53.294Z,1528904753.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:53.318Z,1528904753.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:53.703Z,1528904753.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:53.721Z,1528904753.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:54.104Z,1528904754.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:54.121Z,1528904754.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:54.483Z,1528904754.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:54.510Z,1528904754.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:54.883Z,1528904754.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:54.916Z,1528904754.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:55.283Z,1528904755.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:55.312Z,1528904755.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:55.683Z,1528904755.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:55.710Z,1528904755.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:56.104Z,1528904756.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:56.128Z,1528904756.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:56.500Z,1528904756.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:56.524Z,1528904756.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:56.894Z,1528904756.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:56.917Z,1528904756.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:57.287Z,1528904757.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:57.314Z,1528904757.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:57.683Z,1528904757.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:57.711Z,1528904757.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:58.083Z,1528904758.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:58.116Z,1528904758.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:58.484Z,1528904758.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:58.511Z,1528904758.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:58.884Z,1528904758.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:58.920Z,1528904758.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:59.304Z,1528904759.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:59.322Z,1528904759.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:45:59.703Z,1528904759.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:45:59.728Z,1528904759.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:00.099Z,1528904760.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:00.129Z,1528904760.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:00.486Z,1528904760.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:00.513Z,1528904760.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:00.883Z,1528904760.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:00.910Z,1528904760.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:01.284Z,1528904761.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:01.312Z,1528904761.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:01.683Z,1528904761.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:01.710Z,1528904761.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:02.103Z,1528904762.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:02.122Z,1528904762.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:02.503Z,1528904762.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:02.521Z,1528904762.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:02.900Z,1528904762.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:02.918Z,1528904762.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:03.283Z,1528904763.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:03.310Z,1528904763.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:03.686Z,1528904763.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:03.714Z,1528904763.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:04.087Z,1528904764.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:04.114Z,1528904764.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:04.483Z,1528904764.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:04.510Z,1528904764.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:04.883Z,1528904764.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:04.912Z,1528904764.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:05.304Z,1528904765.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:05.322Z,1528904765.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:05.704Z,1528904765.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:05.721Z,1528904765.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:06.103Z,1528904766.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:06.121Z,1528904766.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:06.483Z,1528904766.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:06.516Z,1528904766.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:06.885Z,1528904766.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:06.912Z,1528904766.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:07.288Z,1528904767.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:07.316Z,1528904767.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:07.688Z,1528904767.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:07.720Z,1528904767.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:08.098Z,1528904768.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:08.121Z,1528904768.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:08.504Z,1528904768.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:08.522Z,1528904768.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:08.903Z,1528904768.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:08.928Z,1528904768.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:09.287Z,1528904769.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:09.320Z,1528904769.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:09.688Z,1528904769.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:09.717Z,1528904769.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:10.085Z,1528904770.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:10.112Z,1528904770.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:10.487Z,1528904770.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:10.514Z,1528904770.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:10.887Z,1528904770.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:10.916Z,1528904770.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:11.300Z,1528904771.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:11.318Z,1528904771.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:11.703Z,1528904771.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:11.739Z,1528904771.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:12.104Z,1528904772.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:12.128Z,1528904772.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:12.128Z,1528904772.128 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 246
2018-06-13T15:46:12.128Z,1528904772.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:46:12.130Z,1528904772.130 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:12.130Z,1528904772.130 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 246
2018-06-13T15:46:12.130Z,1528904772.130 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:46:12.132Z,1528904772.132 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:12.132Z,1528904772.132 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 246
2018-06-13T15:46:12.132Z,1528904772.132 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:46:12.205Z,1528904772.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:46:12.206Z,1528904772.206 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:46:12.206Z,1528904772.206 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:46:12.484Z,1528904772.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:12.598Z,1528904772.598 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:46:12.598Z,1528904772.598 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 246
2018-06-13T15:46:12.598Z,1528904772.598 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:46:12.598Z,1528904772.598 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 246
2018-06-13T15:46:12.599Z,1528904772.599 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:46:12.599Z,1528904772.599 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 246
2018-06-13T15:46:12.887Z,1528904772.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:12.926Z,1528904772.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:46:12.927Z,1528904772.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:46:12.927Z,1528904772.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:46:12.928Z,1528904772.928 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:46:12.928Z,1528904772.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:46:12.928Z,1528904772.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:46:12.933Z,1528904772.933 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:46:12.933Z,1528904772.933 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:46:12.933Z,1528904772.933 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:46:13.295Z,1528904773.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:13.332Z,1528904773.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:46:13.333Z,1528904773.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:13.690Z,1528904773.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:13.708Z,1528904773.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:46:13.729Z,1528904773.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:14.101Z,1528904774.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:14.138Z,1528904774.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:46:14.139Z,1528904774.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:14.505Z,1528904774.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:14.539Z,1528904774.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:46:14.540Z,1528904774.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:14.900Z,1528904774.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:14.937Z,1528904774.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:46:14.938Z,1528904774.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:15.289Z,1528904775.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:15.306Z,1528904775.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:46:15.307Z,1528904775.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:15.690Z,1528904775.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:15.707Z,1528904775.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:46:15.708Z,1528904775.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:16.090Z,1528904776.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:16.108Z,1528904776.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:46:16.109Z,1528904776.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:16.488Z,1528904776.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:16.532Z,1528904776.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:46:16.537Z,1528904776.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:16.889Z,1528904776.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:16.906Z,1528904776.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:46:16.907Z,1528904776.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:17.305Z,1528904777.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:17.337Z,1528904777.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:46:17.338Z,1528904777.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:17.701Z,1528904777.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:17.735Z,1528904777.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:46:17.736Z,1528904777.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:18.100Z,1528904778.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:18.142Z,1528904778.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:46:18.143Z,1528904778.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:18.493Z,1528904778.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:18.511Z,1528904778.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:46:18.512Z,1528904778.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:18.889Z,1528904778.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:18.925Z,1528904778.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:46:18.926Z,1528904778.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:19.293Z,1528904779.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:19.310Z,1528904779.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:46:19.311Z,1528904779.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:19.691Z,1528904779.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:19.712Z,1528904779.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:46:19.713Z,1528904779.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:20.098Z,1528904780.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:20.120Z,1528904780.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:46:20.137Z,1528904780.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:20.498Z,1528904780.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:20.516Z,1528904780.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:46:20.517Z,1528904780.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:20.902Z,1528904780.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:20.940Z,1528904780.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:46:20.945Z,1528904780.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:21.287Z,1528904781.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:21.337Z,1528904781.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:46:21.338Z,1528904781.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:21.693Z,1528904781.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:21.721Z,1528904781.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:46:21.722Z,1528904781.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:22.093Z,1528904782.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:22.116Z,1528904782.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:46:22.117Z,1528904782.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:22.492Z,1528904782.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:22.510Z,1528904782.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:46:22.511Z,1528904782.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:22.890Z,1528904782.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:22.918Z,1528904782.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:46:22.918Z,1528904782.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:23.297Z,1528904783.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:23.317Z,1528904783.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T15:46:23.318Z,1528904783.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:23.698Z,1528904783.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:23.720Z,1528904783.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T15:46:23.721Z,1528904783.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:24.098Z,1528904784.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:24.116Z,1528904784.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T15:46:24.117Z,1528904784.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:24.489Z,1528904784.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:24.524Z,1528904784.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T15:46:24.541Z,1528904784.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:24.888Z,1528904784.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:24.935Z,1528904784.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T15:46:24.936Z,1528904784.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:25.299Z,1528904785.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:25.316Z,1528904785.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T15:46:25.317Z,1528904785.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:25.693Z,1528904785.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:25.711Z,1528904785.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T15:46:25.711Z,1528904785.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:26.104Z,1528904786.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:26.151Z,1528904786.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T15:46:26.151Z,1528904786.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:26.502Z,1528904786.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:26.548Z,1528904786.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T15:46:26.549Z,1528904786.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:26.903Z,1528904786.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:26.928Z,1528904786.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T15:46:26.945Z,1528904786.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:27.291Z,1528904787.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:27.309Z,1528904787.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T15:46:27.310Z,1528904787.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:27.687Z,1528904787.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:27.728Z,1528904787.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:46:27.729Z,1528904787.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:28.089Z,1528904788.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:28.112Z,1528904788.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:46:28.114Z,1528904788.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:28.486Z,1528904788.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:28.524Z,1528904788.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T15:46:28.526Z,1528904788.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:28.897Z,1528904788.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:28.915Z,1528904788.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T15:46:28.916Z,1528904788.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:29.299Z,1528904789.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:29.350Z,1528904789.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:46:29.351Z,1528904789.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:29.705Z,1528904789.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:29.748Z,1528904789.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:46:29.749Z,1528904789.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:30.105Z,1528904790.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:30.144Z,1528904790.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:46:30.149Z,1528904790.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:30.492Z,1528904790.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:30.510Z,1528904790.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T15:46:30.511Z,1528904790.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:30.884Z,1528904790.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:30.928Z,1528904790.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T15:46:30.929Z,1528904790.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:31.284Z,1528904791.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:31.317Z,1528904791.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T15:46:31.318Z,1528904791.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:31.683Z,1528904791.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:31.714Z,1528904791.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T15:46:31.715Z,1528904791.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:32.099Z,1528904792.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:32.150Z,1528904792.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:32.504Z,1528904792.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:32.560Z,1528904792.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:32.902Z,1528904792.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:32.940Z,1528904792.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:33.283Z,1528904793.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:33.324Z,1528904793.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:33.685Z,1528904793.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:33.724Z,1528904793.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:34.079Z,1528904794.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:34.114Z,1528904794.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:34.483Z,1528904794.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:34.519Z,1528904794.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:34.883Z,1528904794.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:34.924Z,1528904794.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:35.302Z,1528904795.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:35.320Z,1528904795.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:35.704Z,1528904795.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:35.740Z,1528904795.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:36.104Z,1528904796.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:36.127Z,1528904796.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:36.483Z,1528904796.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:36.542Z,1528904796.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:36.883Z,1528904796.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:36.916Z,1528904796.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:37.284Z,1528904797.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:37.329Z,1528904797.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:37.684Z,1528904797.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:37.724Z,1528904797.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:38.093Z,1528904798.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:38.128Z,1528904798.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:38.499Z,1528904798.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:38.537Z,1528904798.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:38.893Z,1528904798.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:38.929Z,1528904798.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:39.283Z,1528904799.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:39.300Z,1528904799.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:39.687Z,1528904799.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:39.727Z,1528904799.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:40.086Z,1528904800.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:40.109Z,1528904800.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:40.486Z,1528904800.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:40.504Z,1528904800.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:40.886Z,1528904800.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:40.904Z,1528904800.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:41.297Z,1528904801.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:41.336Z,1528904801.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:41.700Z,1528904801.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:41.720Z,1528904801.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:42.097Z,1528904802.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:42.147Z,1528904802.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:42.490Z,1528904802.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:42.508Z,1528904802.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:42.882Z,1528904802.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:42.921Z,1528904802.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:43.292Z,1528904803.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:43.315Z,1528904803.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:43.689Z,1528904803.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:43.707Z,1528904803.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:44.103Z,1528904804.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:44.132Z,1528904804.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:44.508Z,1528904804.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:44.563Z,1528904804.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:47.621Z,1528904807.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:47.656Z,1528904807.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:47.784Z,1528904807.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:47.816Z,1528904807.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:48.183Z,1528904808.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:48.214Z,1528904808.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:48.584Z,1528904808.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:48.612Z,1528904808.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:48.979Z,1528904808.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:49.012Z,1528904809.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:49.400Z,1528904809.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:49.430Z,1528904809.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:49.801Z,1528904809.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:49.819Z,1528904809.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:50.189Z,1528904810.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:50.224Z,1528904810.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:50.579Z,1528904810.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:50.610Z,1528904810.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:50.979Z,1528904810.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:51.013Z,1528904811.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:51.379Z,1528904811.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:51.398Z,1528904811.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:51.783Z,1528904811.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:51.802Z,1528904811.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:52.190Z,1528904812.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:52.225Z,1528904812.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:52.598Z,1528904812.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:52.632Z,1528904812.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:52.994Z,1528904812.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:53.016Z,1528904813.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:53.385Z,1528904813.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:53.404Z,1528904813.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:53.783Z,1528904813.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:53.806Z,1528904813.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:54.186Z,1528904814.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:54.205Z,1528904814.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:54.586Z,1528904814.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:54.605Z,1528904814.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:54.988Z,1528904814.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:55.006Z,1528904815.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:55.393Z,1528904815.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:55.416Z,1528904815.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:55.794Z,1528904815.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:55.816Z,1528904815.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:56.190Z,1528904816.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:56.214Z,1528904816.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:56.590Z,1528904816.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:56.644Z,1528904816.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:56.985Z,1528904816.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:57.003Z,1528904817.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:57.390Z,1528904817.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:57.408Z,1528904817.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:57.783Z,1528904817.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:57.808Z,1528904817.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:58.195Z,1528904818.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:58.220Z,1528904818.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:58.598Z,1528904818.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:58.620Z,1528904818.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:58.000Z,1528904819.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:59.018Z,1528904819.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:59.375Z,1528904819.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:59.418Z,1528904819.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:46:59.784Z,1528904819.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:46:59.803Z,1528904819.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:00.186Z,1528904820.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:00.210Z,1528904820.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:00.583Z,1528904820.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:00.607Z,1528904820.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:00.983Z,1528904820.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:01.006Z,1528904821.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:01.400Z,1528904821.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:01.418Z,1528904821.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:01.798Z,1528904821.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:01.816Z,1528904821.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:02.195Z,1528904822.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:02.220Z,1528904822.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:02.586Z,1528904822.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:02.610Z,1528904822.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:02.988Z,1528904822.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:03.006Z,1528904823.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:03.390Z,1528904823.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:03.408Z,1528904823.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:03.783Z,1528904823.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:03.809Z,1528904823.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:04.195Z,1528904824.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:04.214Z,1528904824.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:04.599Z,1528904824.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:04.616Z,1528904824.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:04.999Z,1528904824.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:05.024Z,1528904825.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:05.385Z,1528904825.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:05.404Z,1528904825.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:05.783Z,1528904825.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:05.807Z,1528904825.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:06.191Z,1528904826.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:06.210Z,1528904826.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:06.586Z,1528904826.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:06.605Z,1528904826.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:06.979Z,1528904826.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:07.017Z,1528904827.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:07.401Z,1528904827.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:07.419Z,1528904827.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:07.804Z,1528904827.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:07.822Z,1528904827.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:08.200Z,1528904828.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:08.219Z,1528904828.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:08.584Z,1528904828.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:08.614Z,1528904828.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:08.980Z,1528904828.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:09.017Z,1528904829.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:09.382Z,1528904829.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:09.410Z,1528904829.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:09.785Z,1528904829.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:09.815Z,1528904829.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:10.205Z,1528904830.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:10.223Z,1528904830.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:10.600Z,1528904830.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:10.618Z,1528904830.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:10.999Z,1528904830.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:11.026Z,1528904831.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:11.378Z,1528904831.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:11.412Z,1528904831.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:11.779Z,1528904831.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:11.816Z,1528904831.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:12.179Z,1528904832.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:12.210Z,1528904832.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:12.582Z,1528904832.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:12.613Z,1528904832.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:12.985Z,1528904832.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:13.004Z,1528904833.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:13.398Z,1528904833.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:13.432Z,1528904833.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:13.798Z,1528904833.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:13.836Z,1528904833.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:14.192Z,1528904834.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:14.236Z,1528904834.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:14.590Z,1528904834.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:14.608Z,1528904834.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:14.987Z,1528904834.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:15.006Z,1528904835.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:15.387Z,1528904835.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:15.412Z,1528904835.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:15.789Z,1528904835.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:15.807Z,1528904835.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:16.191Z,1528904836.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:16.210Z,1528904836.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:16.603Z,1528904836.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:16.636Z,1528904836.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:16.998Z,1528904836.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:17.016Z,1528904837.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:17.387Z,1528904837.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:17.407Z,1528904837.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:17.784Z,1528904837.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:17.811Z,1528904837.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:18.186Z,1528904838.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:18.227Z,1528904838.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:18.586Z,1528904838.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:18.605Z,1528904838.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:18.984Z,1528904838.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:19.012Z,1528904839.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:19.399Z,1528904839.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:19.436Z,1528904839.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:19.800Z,1528904839.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:19.818Z,1528904839.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:20.200Z,1528904840.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:20.218Z,1528904840.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:20.580Z,1528904840.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:20.616Z,1528904840.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:20.981Z,1528904840.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:21.016Z,1528904841.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:21.382Z,1528904841.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:21.419Z,1528904841.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:21.783Z,1528904841.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:21.814Z,1528904841.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:22.199Z,1528904842.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:22.218Z,1528904842.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:22.600Z,1528904842.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:22.630Z,1528904842.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:22.998Z,1528904842.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:23.023Z,1528904843.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:23.382Z,1528904843.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:23.419Z,1528904843.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:23.779Z,1528904843.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:23.816Z,1528904843.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:24.180Z,1528904844.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:24.232Z,1528904844.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:24.582Z,1528904844.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:24.617Z,1528904844.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:24.982Z,1528904844.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:25.021Z,1528904845.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:25.399Z,1528904845.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:25.438Z,1528904845.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:25.792Z,1528904845.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:25.828Z,1528904845.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:26.191Z,1528904846.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:26.220Z,1528904846.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:26.582Z,1528904846.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:26.616Z,1528904846.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:26.979Z,1528904846.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:27.028Z,1528904847.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:27.380Z,1528904847.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:27.419Z,1528904847.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:27.785Z,1528904847.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:27.829Z,1528904847.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:28.198Z,1528904848.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:28.226Z,1528904848.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:28.599Z,1528904848.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:28.630Z,1528904848.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:29.000Z,1528904849.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:29.030Z,1528904849.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:29.385Z,1528904849.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:29.421Z,1528904849.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:29.785Z,1528904849.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:29.803Z,1528904849.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:30.183Z,1528904850.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:30.232Z,1528904850.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:30.581Z,1528904850.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:30.605Z,1528904850.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:30.984Z,1528904850.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:31.005Z,1528904851.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:31.394Z,1528904851.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:31.438Z,1528904851.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:31.793Z,1528904851.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:31.832Z,1528904851.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:32.196Z,1528904852.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:32.230Z,1528904852.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:32.583Z,1528904852.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:32.606Z,1528904852.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:32.983Z,1528904852.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:33.001Z,1528904853.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:33.382Z,1528904853.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:33.431Z,1528904853.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:33.782Z,1528904853.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:33.806Z,1528904853.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:34.186Z,1528904854.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:34.210Z,1528904854.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:34.595Z,1528904854.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:34.632Z,1528904854.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:34.993Z,1528904854.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:35.032Z,1528904855.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:35.384Z,1528904855.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:35.407Z,1528904855.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:35.784Z,1528904855.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:35.807Z,1528904855.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:36.187Z,1528904856.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:36.225Z,1528904856.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:36.585Z,1528904856.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:36.633Z,1528904856.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:36.984Z,1528904856.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:37.008Z,1528904857.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:37.395Z,1528904857.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:37.416Z,1528904857.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:37.793Z,1528904857.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:37.816Z,1528904857.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:38.190Z,1528904858.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:38.238Z,1528904858.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:38.586Z,1528904858.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:38.610Z,1528904858.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:38.981Z,1528904858.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:39.006Z,1528904859.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:39.387Z,1528904859.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:39.408Z,1528904859.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:39.783Z,1528904859.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:39.833Z,1528904859.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:40.190Z,1528904860.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:40.214Z,1528904860.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:40.594Z,1528904860.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:40.616Z,1528904860.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:40.996Z,1528904860.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:41.017Z,1528904861.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:41.379Z,1528904861.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:41.437Z,1528904861.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:41.785Z,1528904861.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:41.804Z,1528904861.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:42.186Z,1528904862.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:42.210Z,1528904862.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:42.579Z,1528904862.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:42.607Z,1528904862.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:42.979Z,1528904862.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:43.016Z,1528904863.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:43.400Z,1528904863.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:43.428Z,1528904863.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:43.800Z,1528904863.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:43.822Z,1528904863.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:44.202Z,1528904864.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:44.220Z,1528904864.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:44.590Z,1528904864.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:44.652Z,1528904864.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:47.700Z,1528904867.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:47.719Z,1528904867.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:47.846Z,1528904867.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:47.864Z,1528904867.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:48.253Z,1528904868.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:48.271Z,1528904868.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:48.655Z,1528904868.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:48.673Z,1528904868.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:49.048Z,1528904869.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:49.066Z,1528904869.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:49.428Z,1528904869.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:49.468Z,1528904869.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:49.829Z,1528904869.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:49.858Z,1528904869.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:50.233Z,1528904870.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:50.262Z,1528904870.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:50.628Z,1528904870.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:50.666Z,1528904870.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:51.023Z,1528904871.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:51.067Z,1528904871.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:51.443Z,1528904871.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:51.470Z,1528904871.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:51.848Z,1528904871.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:51.868Z,1528904871.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:52.248Z,1528904872.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:52.266Z,1528904872.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:52.628Z,1528904872.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:52.665Z,1528904872.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:53.030Z,1528904873.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:53.066Z,1528904873.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:53.431Z,1528904873.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:53.464Z,1528904873.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:53.832Z,1528904873.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:53.864Z,1528904873.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:54.257Z,1528904874.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:54.275Z,1528904874.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:54.641Z,1528904874.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:54.668Z,1528904874.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:55.042Z,1528904875.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:55.076Z,1528904875.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:55.439Z,1528904875.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:55.457Z,1528904875.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:55.823Z,1528904875.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:55.862Z,1528904875.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:56.240Z,1528904876.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:56.286Z,1528904876.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:56.643Z,1528904876.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:56.663Z,1528904876.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:57.033Z,1528904877.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:57.051Z,1528904877.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:57.451Z,1528904877.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:57.469Z,1528904877.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:57.843Z,1528904877.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:57.870Z,1528904877.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:58.248Z,1528904878.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:58.272Z,1528904878.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:58.638Z,1528904878.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:58.660Z,1528904878.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:59.027Z,1528904879.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:59.076Z,1528904879.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:59.424Z,1528904879.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:59.472Z,1528904879.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:47:59.828Z,1528904879.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:47:59.872Z,1528904879.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:00.249Z,1528904880.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:00.268Z,1528904880.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:00.644Z,1528904880.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:00.667Z,1528904880.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:01.046Z,1528904881.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:01.065Z,1528904881.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:01.428Z,1528904881.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:01.460Z,1528904881.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:01.826Z,1528904881.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:01.865Z,1528904881.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:02.231Z,1528904882.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:02.279Z,1528904882.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:02.627Z,1528904882.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:02.674Z,1528904882.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:03.023Z,1528904883.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:03.056Z,1528904883.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:03.443Z,1528904883.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:03.495Z,1528904883.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:03.847Z,1528904883.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:03.878Z,1528904883.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:04.248Z,1528904884.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:04.298Z,1528904884.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:04.627Z,1528904884.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:04.659Z,1528904884.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:05.029Z,1528904885.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:05.059Z,1528904885.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:05.424Z,1528904885.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:05.461Z,1528904885.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:05.827Z,1528904885.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:05.859Z,1528904885.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:06.252Z,1528904886.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:06.280Z,1528904886.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:06.643Z,1528904886.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:06.676Z,1528904886.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:07.048Z,1528904887.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:07.097Z,1528904887.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:07.427Z,1528904887.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:07.469Z,1528904887.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:07.823Z,1528904887.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:07.860Z,1528904887.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:08.232Z,1528904888.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:08.264Z,1528904888.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:08.623Z,1528904888.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:08.656Z,1528904888.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:09.024Z,1528904889.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:09.067Z,1528904889.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:09.444Z,1528904889.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:09.477Z,1528904889.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:09.847Z,1528904889.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:09.865Z,1528904889.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:10.244Z,1528904890.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:10.281Z,1528904890.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:10.627Z,1528904890.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:10.672Z,1528904890.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:11.027Z,1528904891.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:11.066Z,1528904891.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:11.424Z,1528904891.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:11.467Z,1528904891.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:11.827Z,1528904891.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:11.860Z,1528904891.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:12.248Z,1528904892.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:12.271Z,1528904892.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:12.646Z,1528904892.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:12.672Z,1528904892.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:13.042Z,1528904893.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:13.073Z,1528904893.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:13.426Z,1528904893.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:13.471Z,1528904893.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:13.830Z,1528904893.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:13.848Z,1528904893.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:14.231Z,1528904894.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:14.252Z,1528904894.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:14.631Z,1528904894.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:14.654Z,1528904894.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:15.030Z,1528904895.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:15.048Z,1528904895.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:15.441Z,1528904895.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:15.475Z,1528904895.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:15.841Z,1528904895.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:15.886Z,1528904895.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:16.248Z,1528904896.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:16.282Z,1528904896.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:16.630Z,1528904896.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:16.686Z,1528904896.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:17.033Z,1528904897.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:17.050Z,1528904897.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:17.433Z,1528904897.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:17.452Z,1528904897.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:17.832Z,1528904897.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:17.856Z,1528904897.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:18.245Z,1528904898.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:18.263Z,1528904898.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:18.641Z,1528904898.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:18.659Z,1528904898.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:19.037Z,1528904899.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:19.058Z,1528904899.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:19.434Z,1528904899.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:19.457Z,1528904899.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:19.833Z,1528904899.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:19.851Z,1528904899.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:20.236Z,1528904900.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:20.254Z,1528904900.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:20.632Z,1528904900.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:20.675Z,1528904900.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:21.032Z,1528904901.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:21.055Z,1528904901.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:21.437Z,1528904901.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:21.455Z,1528904901.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:21.839Z,1528904901.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:21.864Z,1528904901.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:22.242Z,1528904902.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:22.262Z,1528904902.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:22.633Z,1528904902.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:22.655Z,1528904902.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:23.034Z,1528904903.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:23.052Z,1528904903.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:23.434Z,1528904903.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:23.452Z,1528904903.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:23.832Z,1528904903.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:23.851Z,1528904903.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:24.245Z,1528904904.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:24.286Z,1528904904.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:24.641Z,1528904904.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:24.660Z,1528904904.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:25.038Z,1528904905.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:25.056Z,1528904905.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:25.438Z,1528904905.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:25.456Z,1528904905.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:25.832Z,1528904905.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:25.859Z,1528904905.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:26.236Z,1528904906.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:26.254Z,1528904906.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:26.635Z,1528904906.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:26.653Z,1528904906.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:27.033Z,1528904907.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:27.056Z,1528904907.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:27.440Z,1528904907.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:27.461Z,1528904907.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:27.841Z,1528904907.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:27.859Z,1528904907.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:28.243Z,1528904908.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:28.261Z,1528904908.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:28.633Z,1528904908.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:28.651Z,1528904908.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:29.034Z,1528904909.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:29.056Z,1528904909.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:29.434Z,1528904909.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:29.456Z,1528904909.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:29.831Z,1528904909.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:29.854Z,1528904909.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:30.245Z,1528904910.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:30.268Z,1528904910.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:30.643Z,1528904910.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:30.662Z,1528904910.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:31.043Z,1528904911.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:31.068Z,1528904911.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:31.435Z,1528904911.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:31.454Z,1528904911.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:31.834Z,1528904911.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:31.856Z,1528904911.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:32.240Z,1528904912.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:32.258Z,1528904912.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:32.637Z,1528904912.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:32.655Z,1528904912.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:33.023Z,1528904913.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:33.052Z,1528904913.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:33.444Z,1528904913.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:33.468Z,1528904913.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:33.849Z,1528904913.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:33.869Z,1528904913.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:34.249Z,1528904914.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:34.267Z,1528904914.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:34.631Z,1528904914.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:34.655Z,1528904914.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:35.039Z,1528904915.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:35.058Z,1528904915.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:35.435Z,1528904915.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:35.453Z,1528904915.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:35.831Z,1528904915.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:35.860Z,1528904915.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:36.249Z,1528904916.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:36.268Z,1528904916.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:36.645Z,1528904916.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:36.668Z,1528904916.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:37.048Z,1528904917.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:37.066Z,1528904917.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:37.427Z,1528904917.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:37.462Z,1528904917.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:37.823Z,1528904917.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:37.864Z,1528904917.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:38.231Z,1528904918.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:38.265Z,1528904918.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:38.628Z,1528904918.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:38.662Z,1528904918.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:39.024Z,1528904919.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:39.064Z,1528904919.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:39.437Z,1528904919.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:39.477Z,1528904919.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:39.841Z,1528904919.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:39.872Z,1528904919.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:40.242Z,1528904920.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:40.270Z,1528904920.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:40.627Z,1528904920.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:40.644Z,1528904920.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:41.028Z,1528904921.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:41.071Z,1528904921.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:41.431Z,1528904921.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:41.456Z,1528904921.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:41.830Z,1528904921.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:41.848Z,1528904921.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:42.245Z,1528904922.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:42.264Z,1528904922.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:42.641Z,1528904922.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:42.659Z,1528904922.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:43.038Z,1528904923.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:43.061Z,1528904923.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:43.435Z,1528904923.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:43.453Z,1528904923.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:43.834Z,1528904923.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:43.852Z,1528904923.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:44.241Z,1528904924.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:44.259Z,1528904924.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:44.262Z,1528904924.262 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T15:48:44.262Z,1528904924.262 [Default:CheckIn:C.Wait] Stopped
2018-06-13T15:48:44.263Z,1528904924.263 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T15:48:44.263Z,1528904924.263 [Default:CheckIn:D] Running Loop=1
2018-06-13T15:48:44.645Z,1528904924.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:44.663Z,1528904924.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:44.667Z,1528904924.667 [Default:CheckIn:D] Stopped
2018-06-13T15:48:44.667Z,1528904924.667 [Default:CheckIn:E] Running Loop=1
2018-06-13T15:48:47.758Z,1528904927.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:47.776Z,1528904927.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:47.795Z,1528904927.795 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 741.520378 min 
2018-06-13T15:48:47.796Z,1528904927.796 [Default:CheckIn:E] Stopped
2018-06-13T15:48:47.796Z,1528904927.796 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T15:48:47.796Z,1528904927.796 [Default:CheckIn] Stopped
2018-06-13T15:48:47.796Z,1528904927.796 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T15:48:47.801Z,1528904927.801 [Default:CheckIn](INFO): Running loop #72
2018-06-13T15:48:47.801Z,1528904927.801 [Default:CheckIn] Running Loop=72
2018-06-13T15:48:47.801Z,1528904927.801 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T15:48:47.801Z,1528904927.801 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T15:48:47.922Z,1528904927.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:47.959Z,1528904927.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:48.316Z,1528904928.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:48.358Z,1528904928.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:48.714Z,1528904928.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:48.757Z,1528904928.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:49.114Z,1528904929.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:49.157Z,1528904929.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:49.526Z,1528904929.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:49.560Z,1528904929.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:49.929Z,1528904929.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:49.955Z,1528904929.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:50.322Z,1528904930.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:50.349Z,1528904930.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:50.715Z,1528904930.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:50.744Z,1528904930.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:51.117Z,1528904931.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:51.160Z,1528904931.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:51.518Z,1528904931.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:51.556Z,1528904931.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:51.913Z,1528904931.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:51.959Z,1528904931.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:52.324Z,1528904932.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:52.363Z,1528904932.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:52.727Z,1528904932.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:52.761Z,1528904932.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:53.126Z,1528904933.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:53.144Z,1528904933.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:53.517Z,1528904933.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:53.565Z,1528904933.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:53.919Z,1528904933.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:53.940Z,1528904933.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:54.320Z,1528904934.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:54.359Z,1528904934.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:54.716Z,1528904934.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:54.740Z,1528904934.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:55.115Z,1528904935.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:55.160Z,1528904935.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:55.528Z,1528904935.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:55.547Z,1528904935.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:55.927Z,1528904935.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:55.944Z,1528904935.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:56.326Z,1528904936.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:56.344Z,1528904936.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:56.715Z,1528904936.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:56.759Z,1528904936.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:57.117Z,1528904937.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:57.139Z,1528904937.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:57.510Z,1528904937.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:57.538Z,1528904937.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:57.916Z,1528904937.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:57.947Z,1528904937.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:58.331Z,1528904938.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:58.379Z,1528904938.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:58.734Z,1528904938.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:58.779Z,1528904938.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:59.135Z,1528904939.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:59.153Z,1528904939.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:59.508Z,1528904939.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:59.548Z,1528904939.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:48:59.911Z,1528904939.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:48:59.954Z,1528904939.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:00.311Z,1528904940.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:00.352Z,1528904940.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:00.712Z,1528904940.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:00.745Z,1528904940.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:01.112Z,1528904941.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:01.142Z,1528904941.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:01.532Z,1528904941.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:01.586Z,1528904941.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:01.932Z,1528904941.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:01.986Z,1528904941.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:02.331Z,1528904942.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:02.349Z,1528904942.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:02.712Z,1528904942.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:02.754Z,1528904942.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:03.111Z,1528904943.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:03.153Z,1528904943.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:03.516Z,1528904943.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:03.555Z,1528904943.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:03.911Z,1528904943.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:03.946Z,1528904943.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:04.324Z,1528904944.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:04.356Z,1528904944.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:04.725Z,1528904944.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:04.771Z,1528904944.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:05.125Z,1528904945.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:05.170Z,1528904945.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:05.516Z,1528904945.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:05.556Z,1528904945.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:05.911Z,1528904945.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:05.947Z,1528904945.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:06.315Z,1528904946.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:06.364Z,1528904946.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:06.712Z,1528904946.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:06.729Z,1528904946.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:07.114Z,1528904947.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:07.136Z,1528904947.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:07.529Z,1528904947.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:07.567Z,1528904947.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:07.925Z,1528904947.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:07.965Z,1528904947.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:08.325Z,1528904948.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:08.360Z,1528904948.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:08.714Z,1528904948.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:08.735Z,1528904948.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:09.112Z,1528904949.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:09.135Z,1528904949.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:09.514Z,1528904949.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:09.536Z,1528904949.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:09.914Z,1528904949.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:09.932Z,1528904949.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:10.322Z,1528904950.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:10.345Z,1528904950.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:10.726Z,1528904950.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:10.768Z,1528904950.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:11.125Z,1528904951.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:11.175Z,1528904951.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:11.516Z,1528904951.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:11.534Z,1528904951.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:11.916Z,1528904951.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:11.933Z,1528904951.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:12.318Z,1528904952.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:12.342Z,1528904952.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:12.718Z,1528904952.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:12.736Z,1528904952.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:13.117Z,1528904953.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:13.135Z,1528904953.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:13.135Z,1528904953.135 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 247
2018-06-13T15:49:13.135Z,1528904953.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:49:13.137Z,1528904953.137 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:13.137Z,1528904953.137 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 247
2018-06-13T15:49:13.137Z,1528904953.137 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:49:13.139Z,1528904953.139 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:13.139Z,1528904953.139 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 247
2018-06-13T15:49:13.139Z,1528904953.139 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:49:13.217Z,1528904953.217 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:49:13.217Z,1528904953.217 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:49:13.218Z,1528904953.218 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:49:13.529Z,1528904953.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:13.641Z,1528904953.641 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:49:13.641Z,1528904953.641 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 247
2018-06-13T15:49:13.642Z,1528904953.642 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:49:13.642Z,1528904953.642 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 247
2018-06-13T15:49:13.642Z,1528904953.642 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:49:13.642Z,1528904953.642 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 247
2018-06-13T15:49:13.927Z,1528904953.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:13.949Z,1528904953.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:49:13.949Z,1528904953.949 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:49:13.949Z,1528904953.949 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:49:13.950Z,1528904953.950 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:49:13.950Z,1528904953.950 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:49:13.950Z,1528904953.950 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:49:13.951Z,1528904953.951 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:49:13.951Z,1528904953.951 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:49:13.952Z,1528904953.952 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:49:14.325Z,1528904954.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:14.362Z,1528904954.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:49:14.363Z,1528904954.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:14.711Z,1528904954.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:14.748Z,1528904954.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:49:14.753Z,1528904954.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:15.112Z,1528904955.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:15.152Z,1528904955.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:49:15.157Z,1528904955.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:15.512Z,1528904955.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:15.538Z,1528904955.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:49:15.539Z,1528904955.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:15.911Z,1528904955.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:15.928Z,1528904955.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:49:15.929Z,1528904955.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:16.325Z,1528904956.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:16.367Z,1528904956.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:49:16.368Z,1528904956.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:16.725Z,1528904956.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:16.755Z,1528904956.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:49:16.755Z,1528904956.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:17.126Z,1528904957.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:17.165Z,1528904957.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:49:17.166Z,1528904957.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:17.518Z,1528904957.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:17.536Z,1528904957.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:49:17.537Z,1528904957.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:17.915Z,1528904957.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:17.946Z,1528904957.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:49:17.947Z,1528904957.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:18.318Z,1528904958.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:18.336Z,1528904958.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:49:18.336Z,1528904958.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:18.711Z,1528904958.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:18.735Z,1528904958.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:49:18.737Z,1528904958.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:19.115Z,1528904959.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:19.142Z,1528904959.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:49:19.143Z,1528904959.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:19.526Z,1528904959.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:19.548Z,1528904959.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:49:19.549Z,1528904959.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:19.927Z,1528904959.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:19.944Z,1528904959.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:49:19.945Z,1528904959.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:20.327Z,1528904960.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:20.349Z,1528904960.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:49:20.350Z,1528904960.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:20.718Z,1528904960.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:20.736Z,1528904960.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:49:20.737Z,1528904960.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:21.107Z,1528904961.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:21.148Z,1528904961.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:49:21.149Z,1528904961.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:21.518Z,1528904961.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:21.536Z,1528904961.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:49:21.537Z,1528904961.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:21.919Z,1528904961.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:21.937Z,1528904961.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:49:21.938Z,1528904961.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:22.331Z,1528904962.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:22.349Z,1528904962.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:49:22.350Z,1528904962.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:22.730Z,1528904962.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:22.748Z,1528904962.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:49:22.749Z,1528904962.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:23.131Z,1528904963.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:23.149Z,1528904963.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:49:23.150Z,1528904963.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:23.507Z,1528904963.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:23.542Z,1528904963.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:49:23.544Z,1528904963.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:23.911Z,1528904963.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:23.947Z,1528904963.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:49:23.948Z,1528904963.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:24.312Z,1528904964.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:24.344Z,1528904964.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T15:49:24.345Z,1528904964.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:24.721Z,1528904964.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:24.739Z,1528904964.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T15:49:24.740Z,1528904964.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:25.111Z,1528904965.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:25.151Z,1528904965.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T15:49:25.152Z,1528904965.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:25.533Z,1528904965.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:25.551Z,1528904965.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T15:49:25.552Z,1528904965.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:25.928Z,1528904965.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:25.947Z,1528904965.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T15:49:25.947Z,1528904965.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:26.328Z,1528904966.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:26.345Z,1528904966.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T15:49:26.346Z,1528904966.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:26.712Z,1528904966.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:26.752Z,1528904966.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T15:49:26.758Z,1528904966.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:27.111Z,1528904967.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:27.138Z,1528904967.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T15:49:27.139Z,1528904967.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:27.512Z,1528904967.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:27.553Z,1528904967.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T15:49:27.554Z,1528904967.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:27.911Z,1528904967.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:27.939Z,1528904967.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T15:49:27.940Z,1528904967.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:28.331Z,1528904968.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:28.349Z,1528904968.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T15:49:28.351Z,1528904968.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:28.732Z,1528904968.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:28.751Z,1528904968.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:49:28.751Z,1528904968.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:29.132Z,1528904969.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:29.150Z,1528904969.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:49:29.151Z,1528904969.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:29.507Z,1528904969.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:29.543Z,1528904969.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T15:49:29.544Z,1528904969.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:29.911Z,1528904969.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:29.947Z,1528904969.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T15:49:29.948Z,1528904969.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:30.311Z,1528904970.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:30.349Z,1528904970.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:49:30.350Z,1528904970.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:30.708Z,1528904970.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:30.741Z,1528904970.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:49:30.742Z,1528904970.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:31.111Z,1528904971.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:31.128Z,1528904971.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:49:31.145Z,1528904971.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:31.525Z,1528904971.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:31.554Z,1528904971.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T15:49:31.556Z,1528904971.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:31.921Z,1528904971.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:31.959Z,1528904971.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T15:49:31.960Z,1528904971.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:32.321Z,1528904972.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:32.355Z,1528904972.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T15:49:32.356Z,1528904972.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:32.711Z,1528904972.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:32.729Z,1528904972.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T15:49:32.730Z,1528904972.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:33.111Z,1528904973.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:33.128Z,1528904973.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T15:49:33.130Z,1528904973.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:33.515Z,1528904973.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:33.540Z,1528904973.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:33.914Z,1528904973.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:33.932Z,1528904973.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:34.322Z,1528904974.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:34.340Z,1528904974.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:34.725Z,1528904974.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:34.743Z,1528904974.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:35.125Z,1528904975.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:35.143Z,1528904975.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:35.511Z,1528904975.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:35.544Z,1528904975.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:35.916Z,1528904975.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:35.934Z,1528904975.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:36.325Z,1528904976.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:36.344Z,1528904976.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:36.725Z,1528904976.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:36.743Z,1528904976.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:37.122Z,1528904977.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:37.144Z,1528904977.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:37.519Z,1528904977.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:37.537Z,1528904977.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:37.911Z,1528904977.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:37.934Z,1528904977.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:38.322Z,1528904978.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:38.340Z,1528904978.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:38.725Z,1528904978.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:38.743Z,1528904978.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:39.122Z,1528904979.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:39.140Z,1528904979.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:39.515Z,1528904979.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:39.546Z,1528904979.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:39.915Z,1528904979.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:39.949Z,1528904979.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:40.324Z,1528904980.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:40.342Z,1528904980.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:40.726Z,1528904980.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:40.748Z,1528904980.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:41.127Z,1528904981.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:41.145Z,1528904981.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:41.518Z,1528904981.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:41.535Z,1528904981.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:41.907Z,1528904981.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:41.941Z,1528904981.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:42.332Z,1528904982.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:42.351Z,1528904982.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:42.727Z,1528904982.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:42.749Z,1528904982.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:43.132Z,1528904983.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:43.156Z,1528904983.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:43.512Z,1528904983.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:43.552Z,1528904983.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:43.911Z,1528904983.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:43.938Z,1528904983.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:44.331Z,1528904984.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:44.357Z,1528904984.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:44.736Z,1528904984.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:44.754Z,1528904984.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:47.838Z,1528904987.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:47.856Z,1528904987.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:47.989Z,1528904987.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:48.034Z,1528904988.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:48.387Z,1528904988.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:48.410Z,1528904988.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:48.786Z,1528904988.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:48.808Z,1528904988.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:49.186Z,1528904989.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:49.207Z,1528904989.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:49.594Z,1528904989.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:49.643Z,1528904989.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:49.993Z,1528904989.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:50.016Z,1528904990.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:50.390Z,1528904990.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:50.414Z,1528904990.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:50.783Z,1528904990.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:50.812Z,1528904990.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:51.186Z,1528904991.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:51.236Z,1528904991.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:51.585Z,1528904991.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:51.603Z,1528904991.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:51.983Z,1528904991.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:52.020Z,1528904992.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:52.396Z,1528904992.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:52.415Z,1528904992.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:52.794Z,1528904992.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:52.842Z,1528904992.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:53.195Z,1528904993.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:53.218Z,1528904993.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:53.581Z,1528904993.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:53.599Z,1528904993.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:53.985Z,1528904993.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:54.008Z,1528904994.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:54.386Z,1528904994.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:54.404Z,1528904994.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:54.782Z,1528904994.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:54.800Z,1528904994.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:55.185Z,1528904995.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:55.206Z,1528904995.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:55.596Z,1528904995.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:55.617Z,1528904995.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:55.994Z,1528904995.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:56.044Z,1528904996.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:56.394Z,1528904996.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:56.412Z,1528904996.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:56.786Z,1528904996.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:56.804Z,1528904996.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:57.179Z,1528904997.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:57.207Z,1528904997.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:57.583Z,1528904997.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:57.605Z,1528904997.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:57.984Z,1528904997.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:58.014Z,1528904998.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:58.394Z,1528904998.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:58.418Z,1528904998.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:58.794Z,1528904998.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:58.816Z,1528904998.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:59.194Z,1528904999.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:59.212Z,1528904999.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:59.575Z,1528904999.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:49:59.611Z,1528904999.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:49:59.983Z,1528904999.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:00.006Z,1528905000.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:00.379Z,1528905000.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:00.420Z,1528905000.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:00.779Z,1528905000.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:00.806Z,1528905000.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:01.175Z,1528905001.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:01.211Z,1528905001.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:01.600Z,1528905001.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:01.624Z,1528905001.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:01.994Z,1528905001.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:02.018Z,1528905002.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:02.396Z,1528905002.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:02.413Z,1528905002.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:02.780Z,1528905002.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:02.816Z,1528905002.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:03.183Z,1528905003.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:03.210Z,1528905003.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:03.580Z,1528905003.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:03.626Z,1528905003.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:03.979Z,1528905003.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:04.010Z,1528905004.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:04.390Z,1528905004.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:04.417Z,1528905004.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:04.794Z,1528905004.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:04.827Z,1528905004.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:05.194Z,1528905005.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:05.230Z,1528905005.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:05.579Z,1528905005.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:05.614Z,1528905005.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:05.979Z,1528905005.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:05.998Z,1528905005.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:06.383Z,1528905006.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:06.402Z,1528905006.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:06.783Z,1528905006.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:06.825Z,1528905006.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:07.183Z,1528905007.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:07.201Z,1528905007.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:07.593Z,1528905007.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:07.612Z,1528905007.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:07.990Z,1528905007.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:08.009Z,1528905008.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:08.397Z,1528905008.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:08.420Z,1528905008.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:08.787Z,1528905008.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:08.805Z,1528905008.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:09.175Z,1528905009.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:09.211Z,1528905009.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:09.584Z,1528905009.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:09.618Z,1528905009.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:09.976Z,1528905009.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:10.022Z,1528905010.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:10.390Z,1528905010.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:10.414Z,1528905010.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:10.801Z,1528905010.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:10.819Z,1528905010.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:11.200Z,1528905011.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:11.218Z,1528905011.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:11.575Z,1528905011.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:11.621Z,1528905011.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:11.979Z,1528905011.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:12.022Z,1528905012.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:12.379Z,1528905012.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:12.417Z,1528905012.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:12.776Z,1528905012.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:12.806Z,1528905012.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:13.179Z,1528905013.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:13.214Z,1528905013.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:13.589Z,1528905013.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:13.628Z,1528905013.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:13.993Z,1528905013.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:14.028Z,1528905014.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:14.397Z,1528905014.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:14.426Z,1528905014.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:14.783Z,1528905014.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:14.800Z,1528905014.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:15.178Z,1528905015.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:15.196Z,1528905015.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:15.582Z,1528905015.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:15.600Z,1528905015.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:15.982Z,1528905015.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:15.999Z,1528905015.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:16.387Z,1528905016.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:16.405Z,1528905016.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:16.793Z,1528905016.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:16.811Z,1528905016.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:17.189Z,1528905017.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:17.215Z,1528905017.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:17.585Z,1528905017.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:17.603Z,1528905017.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:17.983Z,1528905017.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:18.005Z,1528905018.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:18.390Z,1528905018.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:18.416Z,1528905018.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:18.790Z,1528905018.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:18.812Z,1528905018.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:19.197Z,1528905019.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:19.215Z,1528905019.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:19.582Z,1528905019.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:19.599Z,1528905019.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:19.978Z,1528905019.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:20.008Z,1528905020.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:20.383Z,1528905020.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:20.406Z,1528905020.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:20.786Z,1528905020.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:20.804Z,1528905020.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:21.179Z,1528905021.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:21.204Z,1528905021.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:21.594Z,1528905021.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:21.612Z,1528905021.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:21.995Z,1528905021.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:22.012Z,1528905022.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:22.391Z,1528905022.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:22.408Z,1528905022.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:22.783Z,1528905022.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:22.806Z,1528905022.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:23.186Z,1528905023.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:23.208Z,1528905023.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:23.584Z,1528905023.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:23.602Z,1528905023.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:23.986Z,1528905023.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:24.004Z,1528905024.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:24.394Z,1528905024.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:24.416Z,1528905024.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:24.794Z,1528905024.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:24.816Z,1528905024.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:25.194Z,1528905025.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:25.211Z,1528905025.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:25.582Z,1528905025.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:25.604Z,1528905025.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:25.978Z,1528905025.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:26.012Z,1528905026.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:26.394Z,1528905026.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:26.412Z,1528905026.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:26.795Z,1528905026.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:26.812Z,1528905026.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:27.194Z,1528905027.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:27.220Z,1528905027.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:27.585Z,1528905027.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:27.608Z,1528905027.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:27.985Z,1528905027.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:28.004Z,1528905028.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:28.394Z,1528905028.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:28.416Z,1528905028.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:28.797Z,1528905028.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:28.815Z,1528905028.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:29.194Z,1528905029.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:29.218Z,1528905029.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:29.586Z,1528905029.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:29.603Z,1528905029.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:29.985Z,1528905029.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:30.002Z,1528905030.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:30.394Z,1528905030.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:30.412Z,1528905030.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:30.795Z,1528905030.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:30.813Z,1528905030.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:31.194Z,1528905031.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:31.212Z,1528905031.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:31.587Z,1528905031.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:31.604Z,1528905031.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:31.985Z,1528905031.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:32.003Z,1528905032.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:32.394Z,1528905032.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:32.412Z,1528905032.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:32.799Z,1528905032.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:32.817Z,1528905032.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:33.195Z,1528905033.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:33.220Z,1528905033.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:33.586Z,1528905033.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:33.608Z,1528905033.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:33.985Z,1528905033.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:34.003Z,1528905034.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:34.394Z,1528905034.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:34.420Z,1528905034.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:34.798Z,1528905034.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:34.821Z,1528905034.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:35.199Z,1528905035.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:35.245Z,1528905035.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:35.587Z,1528905035.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:35.606Z,1528905035.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:35.983Z,1528905035.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:36.009Z,1528905036.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:36.399Z,1528905036.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:36.417Z,1528905036.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:36.799Z,1528905036.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:36.824Z,1528905036.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:37.195Z,1528905037.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:37.213Z,1528905037.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:37.580Z,1528905037.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:37.608Z,1528905037.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:37.979Z,1528905037.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:38.006Z,1528905038.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:38.396Z,1528905038.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:38.413Z,1528905038.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:38.800Z,1528905038.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:38.824Z,1528905038.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:39.199Z,1528905039.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:39.217Z,1528905039.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:39.578Z,1528905039.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:39.613Z,1528905039.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:39.979Z,1528905039.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:40.008Z,1528905040.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:40.396Z,1528905040.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:40.414Z,1528905040.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:40.799Z,1528905040.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:40.817Z,1528905040.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:41.204Z,1528905041.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:41.224Z,1528905041.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:41.580Z,1528905041.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:41.609Z,1528905041.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:41.979Z,1528905041.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:42.009Z,1528905042.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:42.402Z,1528905042.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:42.419Z,1528905042.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:42.800Z,1528905042.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:42.818Z,1528905042.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:43.196Z,1528905043.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:43.215Z,1528905043.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:43.580Z,1528905043.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:43.616Z,1528905043.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:43.979Z,1528905043.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:44.015Z,1528905044.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:44.403Z,1528905044.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:44.421Z,1528905044.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:44.804Z,1528905044.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:44.828Z,1528905044.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:47.913Z,1528905047.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:47.932Z,1528905047.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:48.071Z,1528905048.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:48.112Z,1528905048.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:48.471Z,1528905048.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:48.506Z,1528905048.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:48.871Z,1528905048.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:48.905Z,1528905048.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:49.268Z,1528905049.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:49.286Z,1528905049.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:49.678Z,1528905049.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:49.718Z,1528905049.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:50.079Z,1528905050.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:50.114Z,1528905050.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:50.478Z,1528905050.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:50.520Z,1528905050.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:50.867Z,1528905050.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:50.885Z,1528905050.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:51.267Z,1528905051.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:51.285Z,1528905051.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:51.666Z,1528905051.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:51.689Z,1528905051.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:52.066Z,1528905052.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:52.084Z,1528905052.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:52.475Z,1528905052.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:52.493Z,1528905052.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:52.878Z,1528905052.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:52.913Z,1528905052.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:53.278Z,1528905053.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:53.301Z,1528905053.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:53.669Z,1528905053.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:53.695Z,1528905053.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:54.067Z,1528905054.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:54.098Z,1528905054.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:54.470Z,1528905054.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:54.494Z,1528905054.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:54.870Z,1528905054.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:54.892Z,1528905054.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:55.270Z,1528905055.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:55.288Z,1528905055.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:55.681Z,1528905055.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:55.699Z,1528905055.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:56.077Z,1528905056.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:56.103Z,1528905056.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:56.479Z,1528905056.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:56.502Z,1528905056.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:56.871Z,1528905056.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:56.902Z,1528905056.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:57.271Z,1528905057.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:57.288Z,1528905057.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:57.670Z,1528905057.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:57.691Z,1528905057.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:58.068Z,1528905058.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:58.118Z,1528905058.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:58.479Z,1528905058.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:58.497Z,1528905058.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:58.878Z,1528905058.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:58.896Z,1528905058.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:59.279Z,1528905059.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:59.298Z,1528905059.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:50:59.663Z,1528905059.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:50:59.698Z,1528905059.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:00.065Z,1528905060.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:00.091Z,1528905060.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:00.470Z,1528905060.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:00.490Z,1528905060.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:00.864Z,1528905060.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:00.891Z,1528905060.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:01.263Z,1528905061.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:01.290Z,1528905061.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:01.684Z,1528905061.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:01.703Z,1528905061.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:02.081Z,1528905062.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:02.099Z,1528905062.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:02.479Z,1528905062.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:02.497Z,1528905062.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:02.863Z,1528905062.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:02.903Z,1528905062.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:03.263Z,1528905063.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:03.293Z,1528905063.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:03.664Z,1528905063.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:03.691Z,1528905063.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:04.063Z,1528905064.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:04.100Z,1528905064.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:04.476Z,1528905064.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:04.494Z,1528905064.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:04.882Z,1528905064.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:04.908Z,1528905064.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:05.284Z,1528905065.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:05.302Z,1528905065.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:05.663Z,1528905065.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:05.700Z,1528905065.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:06.063Z,1528905066.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:06.100Z,1528905066.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:06.463Z,1528905066.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:06.504Z,1528905066.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:06.864Z,1528905066.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:06.903Z,1528905066.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:07.263Z,1528905067.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:07.299Z,1528905067.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:07.682Z,1528905067.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:07.724Z,1528905067.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:08.074Z,1528905068.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:08.107Z,1528905068.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:08.474Z,1528905068.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:08.507Z,1528905068.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:08.859Z,1528905068.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:08.894Z,1528905068.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:09.259Z,1528905069.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:09.300Z,1528905069.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:09.664Z,1528905069.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:09.682Z,1528905069.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:10.062Z,1528905070.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:10.104Z,1528905070.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:10.478Z,1528905070.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:10.511Z,1528905070.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:10.882Z,1528905070.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:10.912Z,1528905070.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:11.281Z,1528905071.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:11.310Z,1528905071.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:11.663Z,1528905071.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:11.688Z,1528905071.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:12.066Z,1528905072.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:12.084Z,1528905072.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:12.470Z,1528905072.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:12.488Z,1528905072.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:12.865Z,1528905072.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:12.883Z,1528905072.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:13.266Z,1528905073.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:13.284Z,1528905073.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:13.678Z,1528905073.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:13.696Z,1528905073.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:14.078Z,1528905074.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:14.095Z,1528905074.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:14.474Z,1528905074.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:14.492Z,1528905074.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:14.870Z,1528905074.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:14.888Z,1528905074.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:15.269Z,1528905075.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:15.287Z,1528905075.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:15.667Z,1528905075.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:15.699Z,1528905075.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:16.070Z,1528905076.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:16.092Z,1528905076.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:16.475Z,1528905076.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:16.493Z,1528905076.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:16.878Z,1528905076.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:16.895Z,1528905076.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:17.278Z,1528905077.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:17.296Z,1528905077.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:17.670Z,1528905077.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:17.688Z,1528905077.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:18.068Z,1528905078.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:18.086Z,1528905078.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:18.474Z,1528905078.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:18.509Z,1528905078.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:18.874Z,1528905078.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:18.896Z,1528905078.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:19.274Z,1528905079.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:19.292Z,1528905079.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:19.671Z,1528905079.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:19.689Z,1528905079.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:20.069Z,1528905080.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:20.087Z,1528905080.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:20.475Z,1528905080.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:20.500Z,1528905080.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:20.879Z,1528905080.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:20.904Z,1528905080.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:21.276Z,1528905081.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:21.296Z,1528905081.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:21.667Z,1528905081.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:21.691Z,1528905081.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:22.067Z,1528905082.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:22.092Z,1528905082.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:22.478Z,1528905082.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:22.496Z,1528905082.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:22.878Z,1528905082.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:22.900Z,1528905082.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:23.279Z,1528905083.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:23.298Z,1528905083.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:23.663Z,1528905083.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:23.692Z,1528905083.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:24.063Z,1528905084.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:24.099Z,1528905084.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:24.484Z,1528905084.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:24.503Z,1528905084.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:24.884Z,1528905084.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:24.902Z,1528905084.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:25.280Z,1528905085.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:25.298Z,1528905085.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:25.664Z,1528905085.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:25.696Z,1528905085.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:26.059Z,1528905086.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:26.086Z,1528905086.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:26.484Z,1528905086.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:26.502Z,1528905086.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:26.884Z,1528905086.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:26.902Z,1528905086.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:27.280Z,1528905087.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:27.298Z,1528905087.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:27.664Z,1528905087.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:27.694Z,1528905087.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:28.063Z,1528905088.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:28.108Z,1528905088.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:28.478Z,1528905088.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:28.502Z,1528905088.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:28.884Z,1528905088.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:28.902Z,1528905088.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:29.285Z,1528905089.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:29.304Z,1528905089.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:29.664Z,1528905089.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:29.696Z,1528905089.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:30.063Z,1528905090.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:30.100Z,1528905090.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:30.485Z,1528905090.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:30.503Z,1528905090.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:30.880Z,1528905090.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:30.898Z,1528905090.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:31.279Z,1528905091.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:31.298Z,1528905091.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:31.664Z,1528905091.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:31.696Z,1528905091.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:32.063Z,1528905092.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:32.100Z,1528905092.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:32.478Z,1528905092.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:32.501Z,1528905092.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:32.884Z,1528905092.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:32.903Z,1528905092.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:33.270Z,1528905093.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:33.304Z,1528905093.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:33.664Z,1528905093.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:33.699Z,1528905093.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:34.063Z,1528905094.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:34.107Z,1528905094.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:34.474Z,1528905094.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:34.508Z,1528905094.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:34.888Z,1528905094.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:34.906Z,1528905094.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:35.284Z,1528905095.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:35.303Z,1528905095.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:35.665Z,1528905095.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:35.699Z,1528905095.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:36.063Z,1528905096.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:36.104Z,1528905096.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:36.474Z,1528905096.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:36.505Z,1528905096.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:36.878Z,1528905096.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:36.907Z,1528905096.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:37.274Z,1528905097.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:37.302Z,1528905097.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:37.664Z,1528905097.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:37.705Z,1528905097.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:38.059Z,1528905098.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:38.078Z,1528905098.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:38.474Z,1528905098.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:38.511Z,1528905098.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:38.878Z,1528905098.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:38.922Z,1528905098.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:39.274Z,1528905099.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:39.314Z,1528905099.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:39.664Z,1528905099.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:39.682Z,1528905099.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:40.063Z,1528905100.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:40.082Z,1528905100.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:40.474Z,1528905100.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:40.508Z,1528905100.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:40.878Z,1528905100.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:40.916Z,1528905100.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:41.278Z,1528905101.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:41.296Z,1528905101.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:41.670Z,1528905101.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:41.688Z,1528905101.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:42.068Z,1528905102.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:42.086Z,1528905102.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:42.478Z,1528905102.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:42.496Z,1528905102.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:42.874Z,1528905102.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:42.891Z,1528905102.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:43.274Z,1528905103.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:43.292Z,1528905103.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:43.669Z,1528905103.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:43.693Z,1528905103.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:44.068Z,1528905104.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:44.092Z,1528905104.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:44.481Z,1528905104.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:44.499Z,1528905104.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:44.881Z,1528905104.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:44.899Z,1528905104.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:47.997Z,1528905107.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:48.024Z,1528905108.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:48.143Z,1528905108.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:48.173Z,1528905108.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:48.543Z,1528905108.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:48.577Z,1528905108.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:48.944Z,1528905108.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:48.975Z,1528905108.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:49.339Z,1528905109.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:49.379Z,1528905109.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:49.766Z,1528905109.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:49.791Z,1528905109.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:50.153Z,1528905110.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:50.188Z,1528905110.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:50.549Z,1528905110.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:50.576Z,1528905110.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:50.939Z,1528905110.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:50.970Z,1528905110.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:51.339Z,1528905111.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:51.356Z,1528905111.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:51.740Z,1528905111.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:51.758Z,1528905111.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:52.142Z,1528905112.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:52.160Z,1528905112.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:52.546Z,1528905112.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:52.564Z,1528905112.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:52.953Z,1528905112.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:52.971Z,1528905112.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:53.354Z,1528905113.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:53.371Z,1528905113.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:53.745Z,1528905113.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:53.768Z,1528905113.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:54.145Z,1528905114.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:54.162Z,1528905114.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:54.546Z,1528905114.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:54.564Z,1528905114.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:54.939Z,1528905114.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:54.963Z,1528905114.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:55.344Z,1528905115.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:55.362Z,1528905115.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:55.756Z,1528905115.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:55.775Z,1528905115.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:56.158Z,1528905116.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:56.180Z,1528905116.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:56.559Z,1528905116.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:56.568Z,1528905116.568 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T15:51:56.568Z,1528905116.568 [BPC1] Communications Fault, FailCount= 7
2018-06-13T15:51:56.568Z,1528905116.568 [BPC1](ERROR): Communications Fault
2018-06-13T15:51:56.578Z,1528905116.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:56.657Z,1528905116.657 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T15:51:56.939Z,1528905116.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:56.974Z,1528905116.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:57.339Z,1528905117.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:57.375Z,1528905117.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:57.739Z,1528905117.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:57.776Z,1528905117.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:57.865Z,1528905117.865 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T15:51:57.865Z,1528905117.865 [BPC1] No Fault, FailCount= 7
2018-06-13T15:51:58.139Z,1528905118.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:58.224Z,1528905118.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:58.550Z,1528905118.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:58.578Z,1528905118.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:58.953Z,1528905118.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:58.987Z,1528905118.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:59.353Z,1528905119.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:59.391Z,1528905119.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:51:59.735Z,1528905119.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:51:59.752Z,1528905119.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:00.139Z,1528905120.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:00.156Z,1528905120.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:00.543Z,1528905120.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:00.562Z,1528905120.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:00.941Z,1528905120.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:00.959Z,1528905120.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:01.346Z,1528905121.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:01.368Z,1528905121.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:01.753Z,1528905121.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:01.771Z,1528905121.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:02.153Z,1528905122.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:02.171Z,1528905122.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:02.550Z,1528905122.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:02.572Z,1528905122.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:02.946Z,1528905122.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:02.964Z,1528905122.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:03.346Z,1528905123.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:03.364Z,1528905123.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:03.745Z,1528905123.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:03.763Z,1528905123.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:04.146Z,1528905124.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:04.164Z,1528905124.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:04.550Z,1528905124.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:04.568Z,1528905124.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:04.954Z,1528905124.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:04.976Z,1528905124.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:05.355Z,1528905125.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:05.373Z,1528905125.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:05.746Z,1528905125.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:05.764Z,1528905125.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:06.135Z,1528905126.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:06.171Z,1528905126.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:06.560Z,1528905126.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:06.578Z,1528905126.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:06.949Z,1528905126.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:06.984Z,1528905126.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:07.349Z,1528905127.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:07.377Z,1528905127.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:07.740Z,1528905127.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:07.776Z,1528905127.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:08.140Z,1528905128.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:08.177Z,1528905128.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:08.549Z,1528905128.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:08.576Z,1528905128.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:08.953Z,1528905128.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:08.988Z,1528905128.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:09.349Z,1528905129.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:09.384Z,1528905129.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:09.740Z,1528905129.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:09.757Z,1528905129.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:10.144Z,1528905130.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:10.184Z,1528905130.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:10.553Z,1528905130.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:10.587Z,1528905130.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:10.957Z,1528905130.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:10.995Z,1528905130.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:11.353Z,1528905131.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:11.371Z,1528905131.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:11.739Z,1528905131.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:11.763Z,1528905131.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:12.149Z,1528905132.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:12.172Z,1528905132.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:12.555Z,1528905132.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:12.573Z,1528905132.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:12.959Z,1528905132.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:12.977Z,1528905132.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:13.355Z,1528905133.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:13.373Z,1528905133.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:13.744Z,1528905133.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:13.778Z,1528905133.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:14.135Z,1528905134.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:14.173Z,1528905134.173 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:14.173Z,1528905134.173 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 248
2018-06-13T15:52:14.173Z,1528905134.173 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:52:14.175Z,1528905134.175 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:14.175Z,1528905134.175 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 248
2018-06-13T15:52:14.175Z,1528905134.175 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:52:14.177Z,1528905134.177 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:14.177Z,1528905134.177 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 248
2018-06-13T15:52:14.177Z,1528905134.177 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:52:14.265Z,1528905134.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:52:14.265Z,1528905134.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:52:14.266Z,1528905134.266 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:52:14.552Z,1528905134.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:14.649Z,1528905134.649 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:52:14.649Z,1528905134.649 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 248
2018-06-13T15:52:14.650Z,1528905134.650 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:52:14.650Z,1528905134.650 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 248
2018-06-13T15:52:14.650Z,1528905134.650 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:52:14.650Z,1528905134.650 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 248
2018-06-13T15:52:14.957Z,1528905134.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:14.974Z,1528905134.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:52:14.974Z,1528905134.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:52:14.975Z,1528905134.975 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:52:14.975Z,1528905134.975 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:52:14.975Z,1528905134.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:52:14.976Z,1528905134.976 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:52:14.976Z,1528905134.976 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:52:14.977Z,1528905134.977 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:52:14.977Z,1528905134.977 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:52:15.352Z,1528905135.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:15.369Z,1528905135.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:52:15.370Z,1528905135.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:15.740Z,1528905135.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:15.774Z,1528905135.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:52:15.775Z,1528905135.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:16.139Z,1528905136.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:16.177Z,1528905136.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:52:16.178Z,1528905136.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:16.556Z,1528905136.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:16.580Z,1528905136.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:52:16.581Z,1528905136.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:16.960Z,1528905136.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:16.984Z,1528905136.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:52:16.985Z,1528905136.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:17.360Z,1528905137.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:17.378Z,1528905137.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:52:17.379Z,1528905137.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:17.736Z,1528905137.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:17.773Z,1528905137.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:52:17.774Z,1528905137.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:18.139Z,1528905138.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:18.175Z,1528905138.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:52:18.175Z,1528905138.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:18.560Z,1528905138.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:18.578Z,1528905138.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:52:18.579Z,1528905138.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:18.949Z,1528905138.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:18.984Z,1528905138.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:52:18.985Z,1528905138.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:19.349Z,1528905139.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:19.385Z,1528905139.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:52:19.386Z,1528905139.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:19.741Z,1528905139.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:19.782Z,1528905139.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:52:19.783Z,1528905139.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:20.139Z,1528905140.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:20.156Z,1528905140.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:52:20.173Z,1528905140.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:20.549Z,1528905140.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:20.583Z,1528905140.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:52:20.584Z,1528905140.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:20.953Z,1528905140.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:20.981Z,1528905140.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:52:20.982Z,1528905140.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:21.353Z,1528905141.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:21.380Z,1528905141.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:52:21.381Z,1528905141.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:21.743Z,1528905141.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:21.778Z,1528905141.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:52:21.779Z,1528905141.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:22.143Z,1528905142.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:22.160Z,1528905142.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:52:22.161Z,1528905142.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:22.550Z,1528905142.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:22.567Z,1528905142.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:52:22.568Z,1528905142.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:22.956Z,1528905142.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:22.993Z,1528905142.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:52:22.994Z,1528905142.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:23.355Z,1528905143.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:23.373Z,1528905143.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:52:23.374Z,1528905143.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:23.739Z,1528905143.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:23.764Z,1528905143.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:52:23.765Z,1528905143.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:24.146Z,1528905144.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:24.168Z,1528905144.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:52:24.169Z,1528905144.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:24.555Z,1528905144.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:24.573Z,1528905144.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:52:24.574Z,1528905144.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:24.954Z,1528905144.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:24.972Z,1528905144.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:52:24.972Z,1528905144.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:25.355Z,1528905145.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:25.372Z,1528905145.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T15:52:25.373Z,1528905145.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:25.742Z,1528905145.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:25.760Z,1528905145.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T15:52:25.761Z,1528905145.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:26.140Z,1528905146.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:26.159Z,1528905146.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T15:52:26.160Z,1528905146.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:26.550Z,1528905146.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:26.583Z,1528905146.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T15:52:26.584Z,1528905146.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:26.955Z,1528905146.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:26.973Z,1528905146.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T15:52:26.974Z,1528905146.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:27.352Z,1528905147.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:27.370Z,1528905147.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T15:52:27.371Z,1528905147.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:27.740Z,1528905147.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:27.775Z,1528905147.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T15:52:27.776Z,1528905147.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:28.139Z,1528905148.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:28.166Z,1528905148.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T15:52:28.167Z,1528905148.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:28.554Z,1528905148.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:28.576Z,1528905148.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T15:52:28.577Z,1528905148.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:28.959Z,1528905148.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:28.976Z,1528905148.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T15:52:28.977Z,1528905148.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:29.355Z,1528905149.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:29.384Z,1528905149.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T15:52:29.385Z,1528905149.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:29.736Z,1528905149.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:29.769Z,1528905149.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:52:29.770Z,1528905149.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:30.139Z,1528905150.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:30.156Z,1528905150.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:52:30.173Z,1528905150.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:30.553Z,1528905150.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:30.582Z,1528905150.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T15:52:30.583Z,1528905150.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:30.953Z,1528905150.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:30.976Z,1528905150.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T15:52:30.977Z,1528905150.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:31.353Z,1528905151.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:31.386Z,1528905151.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:52:31.387Z,1528905151.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:31.742Z,1528905151.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:31.759Z,1528905151.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:52:31.760Z,1528905151.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:32.138Z,1528905152.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:32.156Z,1528905152.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:52:32.156Z,1528905152.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:32.554Z,1528905152.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:32.586Z,1528905152.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T15:52:32.587Z,1528905152.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:32.953Z,1528905152.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:32.986Z,1528905152.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T15:52:32.987Z,1528905152.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:33.354Z,1528905153.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:33.385Z,1528905153.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T15:52:33.386Z,1528905153.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:33.742Z,1528905153.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:33.764Z,1528905153.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T15:52:33.785Z,1528905153.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:34.142Z,1528905154.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:34.159Z,1528905154.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T15:52:34.160Z,1528905154.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:34.549Z,1528905154.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:34.567Z,1528905154.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:34.953Z,1528905154.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:34.971Z,1528905154.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:35.353Z,1528905155.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:35.371Z,1528905155.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:35.742Z,1528905155.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:35.764Z,1528905155.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:36.143Z,1528905156.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:36.164Z,1528905156.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:36.549Z,1528905156.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:36.572Z,1528905156.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:36.953Z,1528905156.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:36.971Z,1528905156.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:37.350Z,1528905157.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:37.367Z,1528905157.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:37.746Z,1528905157.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:37.763Z,1528905157.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:38.141Z,1528905158.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:38.164Z,1528905158.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:38.550Z,1528905158.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:38.572Z,1528905158.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:38.953Z,1528905158.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:38.970Z,1528905158.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:39.350Z,1528905159.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:39.372Z,1528905159.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:39.745Z,1528905159.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:39.762Z,1528905159.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:40.146Z,1528905160.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:40.163Z,1528905160.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:40.545Z,1528905160.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:40.562Z,1528905160.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:40.953Z,1528905160.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:40.971Z,1528905160.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:41.350Z,1528905161.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:41.372Z,1528905161.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:41.750Z,1528905161.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:41.768Z,1528905161.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:42.143Z,1528905162.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:42.165Z,1528905162.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:42.545Z,1528905162.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:42.563Z,1528905162.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:42.946Z,1528905162.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:42.964Z,1528905162.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:43.344Z,1528905163.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:43.364Z,1528905163.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:43.751Z,1528905163.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:43.769Z,1528905163.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:44.153Z,1528905164.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:44.171Z,1528905164.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:44.554Z,1528905164.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:44.571Z,1528905164.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:44.948Z,1528905164.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:44.966Z,1528905164.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:48.052Z,1528905168.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:48.071Z,1528905168.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:48.183Z,1528905168.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:48.246Z,1528905168.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:48.605Z,1528905168.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:48.623Z,1528905168.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:49.005Z,1528905169.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:49.023Z,1528905169.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:49.395Z,1528905169.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:49.414Z,1528905169.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:49.780Z,1528905169.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:49.810Z,1528905169.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:50.179Z,1528905170.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:50.213Z,1528905170.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:50.596Z,1528905170.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:50.614Z,1528905170.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:50.996Z,1528905170.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:51.020Z,1528905171.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:51.395Z,1528905171.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:51.452Z,1528905171.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:51.780Z,1528905171.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:51.816Z,1528905171.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:52.179Z,1528905172.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:52.223Z,1528905172.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:52.595Z,1528905172.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:52.614Z,1528905172.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:52.000Z,1528905173.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:53.018Z,1528905173.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:53.395Z,1528905173.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:53.424Z,1528905173.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:53.781Z,1528905173.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:53.816Z,1528905173.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:54.179Z,1528905174.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:54.215Z,1528905174.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:54.567Z,1528905174.567 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T15:52:54.567Z,1528905174.567 [NAL9602] Data Fault, FailCount= 3
2018-06-13T15:52:54.567Z,1528905174.567 [NAL9602](ERROR): Data Fault
2018-06-13T15:52:54.584Z,1528905174.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:54.628Z,1528905174.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:54.733Z,1528905174.733 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T15:52:54.963Z,1528905174.963 [NAL9602](INFO): Powering down
2018-06-13T15:52:54.980Z,1528905174.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:55.016Z,1528905175.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:55.379Z,1528905175.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:55.422Z,1528905175.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:55.775Z,1528905175.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:55.816Z,1528905175.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:55.903Z,1528905175.903 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T15:52:55.903Z,1528905175.903 [NAL9602] No Fault, FailCount= 3
2018-06-13T15:52:56.179Z,1528905176.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:56.229Z,1528905176.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:56.583Z,1528905176.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:56.616Z,1528905176.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:56.978Z,1528905176.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:56.996Z,1528905176.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:57.378Z,1528905177.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:57.425Z,1528905177.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:57.782Z,1528905177.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:57.801Z,1528905177.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:58.181Z,1528905178.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:58.199Z,1528905178.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:58.582Z,1528905178.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:58.602Z,1528905178.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:58.982Z,1528905178.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:59.039Z,1528905179.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:59.377Z,1528905179.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:59.403Z,1528905179.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:52:59.782Z,1528905179.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:52:59.800Z,1528905179.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:00.182Z,1528905180.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:00.200Z,1528905180.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:00.581Z,1528905180.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:00.600Z,1528905180.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:00.982Z,1528905180.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:01.001Z,1528905181.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:01.382Z,1528905181.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:01.401Z,1528905181.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:01.782Z,1528905181.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:01.801Z,1528905181.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:02.182Z,1528905182.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:02.203Z,1528905182.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:02.582Z,1528905182.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:02.602Z,1528905182.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:02.981Z,1528905182.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:03.004Z,1528905183.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:03.386Z,1528905183.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:03.405Z,1528905183.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:03.784Z,1528905183.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:03.803Z,1528905183.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:04.186Z,1528905184.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:04.204Z,1528905184.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:04.585Z,1528905184.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:04.610Z,1528905184.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:04.984Z,1528905184.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:05.058Z,1528905185.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:05.386Z,1528905185.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:05.405Z,1528905185.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:05.780Z,1528905185.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:05.804Z,1528905185.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:06.186Z,1528905186.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:06.204Z,1528905186.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:06.586Z,1528905186.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:06.604Z,1528905186.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:06.979Z,1528905186.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:07.004Z,1528905187.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:07.383Z,1528905187.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:07.407Z,1528905187.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:07.781Z,1528905187.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:07.799Z,1528905187.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:08.185Z,1528905188.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:08.208Z,1528905188.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:08.578Z,1528905188.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:08.604Z,1528905188.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:08.984Z,1528905188.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:09.005Z,1528905189.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:09.384Z,1528905189.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:09.403Z,1528905189.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:09.782Z,1528905189.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:09.807Z,1528905189.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:10.175Z,1528905190.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:10.205Z,1528905190.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:10.574Z,1528905190.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:10.604Z,1528905190.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:10.978Z,1528905190.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:11.016Z,1528905191.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:11.378Z,1528905191.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:11.406Z,1528905191.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:11.774Z,1528905191.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:11.808Z,1528905191.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:12.178Z,1528905192.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:12.208Z,1528905192.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:12.578Z,1528905192.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:12.606Z,1528905192.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:12.974Z,1528905192.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:13.008Z,1528905193.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:13.378Z,1528905193.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:13.406Z,1528905193.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:13.778Z,1528905193.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:13.812Z,1528905193.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:14.178Z,1528905194.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:14.250Z,1528905194.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:14.578Z,1528905194.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:14.612Z,1528905194.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:14.975Z,1528905194.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:15.012Z,1528905195.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:15.378Z,1528905195.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:15.412Z,1528905195.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:15.778Z,1528905195.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:15.816Z,1528905195.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:16.178Z,1528905196.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:16.200Z,1528905196.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:16.574Z,1528905196.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:16.592Z,1528905196.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:16.978Z,1528905196.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:16.998Z,1528905196.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:17.378Z,1528905197.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:17.395Z,1528905197.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:17.776Z,1528905197.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:17.794Z,1528905197.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:18.182Z,1528905198.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:18.200Z,1528905198.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:18.577Z,1528905198.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:18.594Z,1528905198.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:18.977Z,1528905198.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:18.995Z,1528905198.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:19.382Z,1528905199.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:19.400Z,1528905199.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:19.778Z,1528905199.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:19.795Z,1528905199.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:20.181Z,1528905200.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:20.200Z,1528905200.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:20.582Z,1528905200.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:20.600Z,1528905200.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:20.978Z,1528905200.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:21.019Z,1528905201.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:21.380Z,1528905201.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:21.398Z,1528905201.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:21.782Z,1528905201.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:21.801Z,1528905201.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:22.179Z,1528905202.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:22.205Z,1528905202.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:22.580Z,1528905202.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:22.598Z,1528905202.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:22.982Z,1528905202.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:22.000Z,1528905203.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:23.381Z,1528905203.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:23.399Z,1528905203.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:23.779Z,1528905203.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:23.799Z,1528905203.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:24.182Z,1528905204.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:24.200Z,1528905204.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:24.580Z,1528905204.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:24.604Z,1528905204.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:24.979Z,1528905204.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:24.998Z,1528905204.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:25.365Z,1528905205.365 [NAL9602](INFO): Powering up NAL9602
2018-06-13T15:53:25.381Z,1528905205.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:25.405Z,1528905205.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:25.782Z,1528905205.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:25.800Z,1528905205.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:26.181Z,1528905206.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:26.200Z,1528905206.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:26.581Z,1528905206.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:26.600Z,1528905206.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:26.980Z,1528905206.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:26.998Z,1528905206.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:27.380Z,1528905207.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:27.398Z,1528905207.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:27.782Z,1528905207.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:27.801Z,1528905207.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:28.184Z,1528905208.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:28.202Z,1528905208.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:28.584Z,1528905208.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:28.603Z,1528905208.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:28.984Z,1528905208.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:29.003Z,1528905209.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:29.380Z,1528905209.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:29.398Z,1528905209.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:29.780Z,1528905209.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:29.798Z,1528905209.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:30.184Z,1528905210.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:30.203Z,1528905210.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:30.584Z,1528905210.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:30.603Z,1528905210.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:30.980Z,1528905210.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:30.999Z,1528905210.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:31.386Z,1528905211.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:31.405Z,1528905211.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:31.780Z,1528905211.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:31.804Z,1528905211.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:32.184Z,1528905212.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:32.203Z,1528905212.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:32.584Z,1528905212.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:32.603Z,1528905212.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:32.984Z,1528905212.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:33.003Z,1528905213.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:33.381Z,1528905213.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:33.400Z,1528905213.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:33.785Z,1528905213.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:33.804Z,1528905213.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:34.181Z,1528905214.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:34.199Z,1528905214.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:34.581Z,1528905214.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:34.599Z,1528905214.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:34.983Z,1528905214.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:35.015Z,1528905215.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:35.383Z,1528905215.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:35.416Z,1528905215.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:35.780Z,1528905215.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:35.799Z,1528905215.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:36.194Z,1528905216.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:36.213Z,1528905216.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:36.562Z,1528905216.562 [NAL9602](INFO): NAL9602 initialized
2018-06-13T15:53:36.583Z,1528905216.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:36.617Z,1528905216.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:36.985Z,1528905216.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:37.004Z,1528905217.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:37.394Z,1528905217.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:37.413Z,1528905217.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:37.794Z,1528905217.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:37.820Z,1528905217.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:38.196Z,1528905218.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:38.220Z,1528905218.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:38.585Z,1528905218.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:38.603Z,1528905218.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:38.983Z,1528905218.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:39.008Z,1528905219.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:39.382Z,1528905219.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:39.401Z,1528905219.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:39.775Z,1528905219.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:39.814Z,1528905219.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:40.198Z,1528905220.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:40.216Z,1528905220.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:40.589Z,1528905220.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:40.618Z,1528905220.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:40.996Z,1528905220.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:41.014Z,1528905221.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:41.379Z,1528905221.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:41.417Z,1528905221.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:41.775Z,1528905221.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:41.802Z,1528905221.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:42.179Z,1528905222.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:42.216Z,1528905222.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:42.583Z,1528905222.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:42.622Z,1528905222.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:42.980Z,1528905222.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:42.999Z,1528905222.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:43.398Z,1528905223.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:43.424Z,1528905223.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:43.798Z,1528905223.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:43.827Z,1528905223.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:44.193Z,1528905224.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:44.233Z,1528905224.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:44.584Z,1528905224.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:44.602Z,1528905224.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:44.985Z,1528905224.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:45.004Z,1528905225.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:45.382Z,1528905225.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:45.402Z,1528905225.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:45.786Z,1528905225.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:45.806Z,1528905225.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:46.198Z,1528905226.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:46.237Z,1528905226.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:46.599Z,1528905226.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:46.616Z,1528905226.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:46.994Z,1528905226.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:47.014Z,1528905227.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:47.387Z,1528905227.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:47.406Z,1528905227.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:47.786Z,1528905227.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:47.805Z,1528905227.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:47.808Z,1528905227.808 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T15:48:47.8Z
2018-06-13T15:53:47.808Z,1528905227.808 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T15:53:47.808Z,1528905227.808 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T15:53:48.189Z,1528905228.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:48.208Z,1528905228.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:52.079Z,1528905232.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:52.097Z,1528905232.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:52.193Z,1528905232.193 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180613T032335/Courier0288.lzma
2018-06-13T15:53:52.214Z,1528905232.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:52.250Z,1528905232.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:52.636Z,1528905232.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:52.654Z,1528905232.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:52.994Z,1528905232.994 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0288.lzma.bak
2018-06-13T15:53:52.994Z,1528905232.994 [DataOverHttps](INFO): SBD MOMSN=8329490
2018-06-13T15:53:53.052Z,1528905233.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:53.086Z,1528905233.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:54.946Z,1528905234.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:54.964Z,1528905234.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:55.071Z,1528905235.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:55.107Z,1528905235.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:55.471Z,1528905235.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:55.509Z,1528905235.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:55.867Z,1528905235.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:55.884Z,1528905235.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:56.267Z,1528905236.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:56.292Z,1528905236.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:59.406Z,1528905239.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:59.424Z,1528905239.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:59.542Z,1528905239.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:59.585Z,1528905239.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:53:59.957Z,1528905239.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:53:59.975Z,1528905239.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:00.353Z,1528905240.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:00.376Z,1528905240.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:00.731Z,1528905240.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:00.764Z,1528905240.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:01.135Z,1528905241.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:01.169Z,1528905241.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:01.532Z,1528905241.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:01.549Z,1528905241.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:01.931Z,1528905241.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:01.956Z,1528905241.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:02.345Z,1528905242.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:02.386Z,1528905242.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:02.749Z,1528905242.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:02.791Z,1528905242.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:03.146Z,1528905243.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:03.164Z,1528905243.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:03.538Z,1528905243.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:03.555Z,1528905243.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:03.940Z,1528905243.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:03.958Z,1528905243.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:04.337Z,1528905244.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:04.355Z,1528905244.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:04.739Z,1528905244.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:04.762Z,1528905244.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:07.869Z,1528905247.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:07.887Z,1528905247.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:08.001Z,1528905248.001 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0289.lzma
2018-06-13T15:54:08.046Z,1528905248.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:08.071Z,1528905248.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:08.446Z,1528905248.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:08.468Z,1528905248.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:08.802Z,1528905248.802 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0289.lzma.bak
2018-06-13T15:54:08.802Z,1528905248.802 [DataOverHttps](INFO): SBD MOMSN=8329492
2018-06-13T15:54:08.831Z,1528905248.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:08.869Z,1528905248.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:10.724Z,1528905250.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:10.759Z,1528905250.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:10.762Z,1528905250.762 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T15:54:10.762Z,1528905250.762 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T15:54:10.762Z,1528905250.762 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T15:54:10.872Z,1528905250.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:10.905Z,1528905250.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:14.032Z,1528905254.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:14.061Z,1528905254.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:14.203Z,1528905254.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:14.251Z,1528905254.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:14.605Z,1528905254.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:14.628Z,1528905254.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:14.988Z,1528905254.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:15.027Z,1528905255.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:15.380Z,1528905255.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:15.418Z,1528905255.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:15.783Z,1528905255.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:15.825Z,1528905255.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:16.202Z,1528905256.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:16.235Z,1528905256.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:16.596Z,1528905256.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:16.624Z,1528905256.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:16.993Z,1528905256.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:17.028Z,1528905257.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:17.383Z,1528905257.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:17.413Z,1528905257.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:17.784Z,1528905257.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:17.822Z,1528905257.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:18.183Z,1528905258.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:18.201Z,1528905258.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:18.588Z,1528905258.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:18.606Z,1528905258.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:18.982Z,1528905258.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:19.001Z,1528905259.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:19.398Z,1528905259.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:19.432Z,1528905259.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:19.799Z,1528905259.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:19.833Z,1528905259.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:20.189Z,1528905260.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:20.208Z,1528905260.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:20.589Z,1528905260.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:20.608Z,1528905260.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:20.989Z,1528905260.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:21.008Z,1528905261.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:21.384Z,1528905261.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:21.410Z,1528905261.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:21.786Z,1528905261.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:21.805Z,1528905261.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:22.198Z,1528905262.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:22.216Z,1528905262.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:22.594Z,1528905262.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:22.633Z,1528905262.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:22.999Z,1528905262.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:23.025Z,1528905263.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:23.379Z,1528905263.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:23.410Z,1528905263.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:23.779Z,1528905263.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:23.817Z,1528905263.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:24.187Z,1528905264.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:24.213Z,1528905264.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:24.580Z,1528905264.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:24.608Z,1528905264.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:24.989Z,1528905264.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:25.008Z,1528905265.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:25.393Z,1528905265.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:25.432Z,1528905265.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:25.799Z,1528905265.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:25.837Z,1528905265.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:26.189Z,1528905266.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:26.218Z,1528905266.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:26.579Z,1528905266.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:26.661Z,1528905266.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:26.979Z,1528905266.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:27.057Z,1528905267.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:27.384Z,1528905267.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:27.414Z,1528905267.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:27.779Z,1528905267.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:27.921Z,1528905267.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:28.200Z,1528905268.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:28.272Z,1528905268.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:28.606Z,1528905268.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:28.673Z,1528905268.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:29.000Z,1528905269.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:29.018Z,1528905269.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:29.383Z,1528905269.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:29.420Z,1528905269.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:29.783Z,1528905269.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:29.819Z,1528905269.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:30.183Z,1528905270.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:30.280Z,1528905270.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:30.583Z,1528905270.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:30.618Z,1528905270.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:30.983Z,1528905270.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:31.017Z,1528905271.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:31.405Z,1528905271.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:31.423Z,1528905271.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:31.801Z,1528905271.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:31.819Z,1528905271.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:32.198Z,1528905272.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:32.222Z,1528905272.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:32.583Z,1528905272.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:32.624Z,1528905272.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:32.979Z,1528905272.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:33.019Z,1528905273.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:33.384Z,1528905273.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:33.415Z,1528905273.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:33.783Z,1528905273.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:33.816Z,1528905273.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:34.202Z,1528905274.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:34.220Z,1528905274.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:34.603Z,1528905274.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:34.628Z,1528905274.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:35.000Z,1528905275.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:35.024Z,1528905275.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:35.379Z,1528905275.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:35.420Z,1528905275.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:35.783Z,1528905275.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:35.816Z,1528905275.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:36.184Z,1528905276.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:36.218Z,1528905276.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:36.583Z,1528905276.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:36.601Z,1528905276.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:36.983Z,1528905276.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:37.001Z,1528905277.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:37.398Z,1528905277.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:37.426Z,1528905277.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:37.797Z,1528905277.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:37.826Z,1528905277.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:38.199Z,1528905278.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:38.227Z,1528905278.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:38.587Z,1528905278.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:38.621Z,1528905278.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:38.983Z,1528905278.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:39.001Z,1528905279.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:39.384Z,1528905279.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:39.402Z,1528905279.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:39.786Z,1528905279.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:39.805Z,1528905279.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:40.193Z,1528905280.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:40.212Z,1528905280.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:40.598Z,1528905280.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:40.615Z,1528905280.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:40.993Z,1528905280.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:41.012Z,1528905281.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:41.386Z,1528905281.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:41.403Z,1528905281.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:41.786Z,1528905281.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:41.821Z,1528905281.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:42.189Z,1528905282.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:42.207Z,1528905282.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:42.586Z,1528905282.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:42.604Z,1528905282.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:42.987Z,1528905282.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:43.019Z,1528905283.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:43.394Z,1528905283.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:43.420Z,1528905283.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:43.795Z,1528905283.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:43.813Z,1528905283.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:44.194Z,1528905284.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:44.220Z,1528905284.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:44.587Z,1528905284.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:44.610Z,1528905284.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:44.985Z,1528905284.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:45.004Z,1528905285.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:45.390Z,1528905285.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:45.408Z,1528905285.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:45.788Z,1528905285.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:45.807Z,1528905285.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:46.194Z,1528905286.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:46.220Z,1528905286.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:46.598Z,1528905286.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:46.616Z,1528905286.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:46.994Z,1528905286.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:47.020Z,1528905287.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:47.385Z,1528905287.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:47.403Z,1528905287.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:47.790Z,1528905287.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:47.809Z,1528905287.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:48.187Z,1528905288.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:48.215Z,1528905288.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:48.586Z,1528905288.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:48.604Z,1528905288.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:48.989Z,1528905288.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:49.007Z,1528905289.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:49.394Z,1528905289.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:49.420Z,1528905289.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:49.795Z,1528905289.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:49.819Z,1528905289.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:50.193Z,1528905290.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:50.216Z,1528905290.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:50.587Z,1528905290.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:50.621Z,1528905290.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:50.986Z,1528905290.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:51.004Z,1528905291.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:51.390Z,1528905291.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:51.408Z,1528905291.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:51.787Z,1528905291.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:51.812Z,1528905291.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:52.199Z,1528905292.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:52.217Z,1528905292.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:52.599Z,1528905292.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:52.617Z,1528905292.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:52.999Z,1528905292.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:53.017Z,1528905293.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:53.386Z,1528905293.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:53.404Z,1528905293.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:53.790Z,1528905293.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:53.808Z,1528905293.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:54.187Z,1528905294.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:54.218Z,1528905294.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:54.588Z,1528905294.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:54.606Z,1528905294.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:54.979Z,1528905294.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:55.007Z,1528905295.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:55.399Z,1528905295.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:55.417Z,1528905295.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:55.800Z,1528905295.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:55.818Z,1528905295.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:56.203Z,1528905296.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:56.221Z,1528905296.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:56.588Z,1528905296.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:56.608Z,1528905296.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:56.979Z,1528905296.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:57.007Z,1528905297.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:57.379Z,1528905297.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:57.416Z,1528905297.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:57.786Z,1528905297.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:57.811Z,1528905297.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:58.202Z,1528905298.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:58.219Z,1528905298.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:58.603Z,1528905298.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:58.629Z,1528905298.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:58.000Z,1528905299.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:59.017Z,1528905299.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:59.392Z,1528905299.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:59.410Z,1528905299.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:54:59.779Z,1528905299.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:54:59.816Z,1528905299.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:00.198Z,1528905300.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:00.224Z,1528905300.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:00.605Z,1528905300.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:00.623Z,1528905300.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:00.998Z,1528905300.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:01.023Z,1528905301.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:01.396Z,1528905301.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:01.415Z,1528905301.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:01.779Z,1528905301.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:01.818Z,1528905301.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:02.190Z,1528905302.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:02.219Z,1528905302.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:02.605Z,1528905302.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:02.623Z,1528905302.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:02.993Z,1528905302.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:03.036Z,1528905303.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:03.380Z,1528905303.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:03.417Z,1528905303.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:03.783Z,1528905303.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:03.821Z,1528905303.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:04.202Z,1528905304.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:04.234Z,1528905304.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:04.598Z,1528905304.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:04.626Z,1528905304.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:04.993Z,1528905304.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:05.039Z,1528905305.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:05.386Z,1528905305.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:05.404Z,1528905305.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:05.782Z,1528905305.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:05.800Z,1528905305.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:06.198Z,1528905306.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:06.237Z,1528905306.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:06.597Z,1528905306.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:06.615Z,1528905306.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:06.990Z,1528905306.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:07.008Z,1528905307.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:07.388Z,1528905307.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:07.407Z,1528905307.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:07.788Z,1528905307.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:07.806Z,1528905307.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:08.190Z,1528905308.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:08.216Z,1528905308.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:08.598Z,1528905308.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:08.615Z,1528905308.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:08.993Z,1528905308.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:09.016Z,1528905309.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:09.385Z,1528905309.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:09.404Z,1528905309.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:09.788Z,1528905309.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:09.806Z,1528905309.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:10.198Z,1528905310.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:10.216Z,1528905310.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:10.598Z,1528905310.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:10.616Z,1528905310.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:11.002Z,1528905311.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:11.020Z,1528905311.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:11.393Z,1528905311.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:11.411Z,1528905311.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:14.498Z,1528905314.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:14.524Z,1528905314.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:14.685Z,1528905314.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:14.721Z,1528905314.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:15.087Z,1528905315.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:15.104Z,1528905315.104 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:15.104Z,1528905315.104 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 249
2018-06-13T15:55:15.104Z,1528905315.104 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:55:15.106Z,1528905315.106 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:15.106Z,1528905315.106 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 249
2018-06-13T15:55:15.106Z,1528905315.106 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:55:15.108Z,1528905315.108 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:15.108Z,1528905315.108 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 249
2018-06-13T15:55:15.108Z,1528905315.108 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:55:15.189Z,1528905315.189 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:55:15.189Z,1528905315.189 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:55:15.189Z,1528905315.189 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:55:15.478Z,1528905315.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:15.589Z,1528905315.589 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:55:15.589Z,1528905315.589 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 249
2018-06-13T15:55:15.589Z,1528905315.589 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:55:15.589Z,1528905315.589 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 249
2018-06-13T15:55:15.590Z,1528905315.590 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:55:15.590Z,1528905315.590 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 249
2018-06-13T15:55:15.866Z,1528905315.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:15.883Z,1528905315.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:55:15.883Z,1528905315.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:55:15.884Z,1528905315.884 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:55:15.884Z,1528905315.884 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:55:15.884Z,1528905315.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:55:15.897Z,1528905315.897 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:55:15.901Z,1528905315.901 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:55:15.901Z,1528905315.901 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:55:15.902Z,1528905315.902 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:55:16.266Z,1528905316.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:16.292Z,1528905316.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T15:55:16.309Z,1528905316.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:16.666Z,1528905316.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:16.684Z,1528905316.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T15:55:16.685Z,1528905316.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:17.068Z,1528905317.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:17.086Z,1528905317.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T15:55:17.087Z,1528905317.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:17.473Z,1528905317.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:17.491Z,1528905317.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T15:55:17.492Z,1528905317.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:17.877Z,1528905317.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:17.895Z,1528905317.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T15:55:17.895Z,1528905317.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:18.274Z,1528905318.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:18.292Z,1528905318.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T15:55:18.293Z,1528905318.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:18.669Z,1528905318.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:18.686Z,1528905318.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T15:55:18.687Z,1528905318.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:19.070Z,1528905319.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:19.087Z,1528905319.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T15:55:19.088Z,1528905319.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:19.468Z,1528905319.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:19.485Z,1528905319.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T15:55:19.486Z,1528905319.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:19.868Z,1528905319.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:19.886Z,1528905319.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T15:55:19.887Z,1528905319.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:20.274Z,1528905320.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:20.291Z,1528905320.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T15:55:20.292Z,1528905320.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:20.677Z,1528905320.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:20.694Z,1528905320.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T15:55:20.695Z,1528905320.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:21.078Z,1528905321.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:21.100Z,1528905321.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T15:55:21.121Z,1528905321.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:21.469Z,1528905321.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:21.486Z,1528905321.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T15:55:21.487Z,1528905321.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:21.867Z,1528905321.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:21.892Z,1528905321.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T15:55:21.897Z,1528905321.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:22.270Z,1528905322.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:22.287Z,1528905322.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T15:55:22.288Z,1528905322.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:22.670Z,1528905322.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:22.688Z,1528905322.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T15:55:22.689Z,1528905322.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:23.067Z,1528905323.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:23.090Z,1528905323.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T15:55:23.091Z,1528905323.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:23.479Z,1528905323.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:23.496Z,1528905323.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T15:55:23.497Z,1528905323.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:23.878Z,1528905323.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:23.900Z,1528905323.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T15:55:23.901Z,1528905323.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:24.278Z,1528905324.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:24.295Z,1528905324.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T15:55:24.296Z,1528905324.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:24.662Z,1528905324.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:24.696Z,1528905324.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T15:55:24.697Z,1528905324.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:25.063Z,1528905325.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:25.086Z,1528905325.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T15:55:25.087Z,1528905325.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:25.467Z,1528905325.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:25.492Z,1528905325.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T15:55:25.497Z,1528905325.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:25.871Z,1528905325.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:25.889Z,1528905325.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T15:55:25.890Z,1528905325.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:26.279Z,1528905326.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:26.297Z,1528905326.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T15:55:26.298Z,1528905326.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:26.682Z,1528905326.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:26.699Z,1528905326.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T15:55:26.700Z,1528905326.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:27.082Z,1528905327.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:27.100Z,1528905327.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T15:55:27.101Z,1528905327.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:27.459Z,1528905327.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:27.495Z,1528905327.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T15:55:27.496Z,1528905327.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:27.867Z,1528905327.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:27.891Z,1528905327.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T15:55:27.892Z,1528905327.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:28.270Z,1528905328.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:28.288Z,1528905328.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T15:55:28.289Z,1528905328.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:28.659Z,1528905328.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:28.695Z,1528905328.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T15:55:28.696Z,1528905328.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:29.063Z,1528905329.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:29.099Z,1528905329.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T15:55:29.100Z,1528905329.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:29.483Z,1528905329.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:29.501Z,1528905329.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T15:55:29.502Z,1528905329.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:29.883Z,1528905329.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:29.901Z,1528905329.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T15:55:29.902Z,1528905329.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:30.279Z,1528905330.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:30.296Z,1528905330.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T15:55:30.297Z,1528905330.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:30.664Z,1528905330.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:30.698Z,1528905330.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T15:55:30.699Z,1528905330.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:31.063Z,1528905331.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:31.089Z,1528905331.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T15:55:31.090Z,1528905331.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:31.464Z,1528905331.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:31.492Z,1528905331.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T15:55:31.493Z,1528905331.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:31.863Z,1528905331.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:31.908Z,1528905331.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T15:55:31.909Z,1528905331.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:32.279Z,1528905332.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:32.297Z,1528905332.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T15:55:32.298Z,1528905332.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:32.682Z,1528905332.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:32.713Z,1528905332.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T15:55:32.714Z,1528905332.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:33.084Z,1528905333.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:33.101Z,1528905333.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T15:55:33.102Z,1528905333.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:33.463Z,1528905333.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:33.489Z,1528905333.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T15:55:33.490Z,1528905333.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:33.863Z,1528905333.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:33.889Z,1528905333.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T15:55:33.890Z,1528905333.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:34.263Z,1528905334.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:34.292Z,1528905334.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T15:55:34.293Z,1528905334.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:34.664Z,1528905334.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:34.691Z,1528905334.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T15:55:34.692Z,1528905334.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:35.063Z,1528905335.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:35.089Z,1528905335.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T15:55:35.090Z,1528905335.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:35.488Z,1528905335.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:35.506Z,1528905335.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:35.883Z,1528905335.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:35.901Z,1528905335.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:36.279Z,1528905336.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:36.297Z,1528905336.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:36.663Z,1528905336.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:36.692Z,1528905336.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:37.063Z,1528905337.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:37.090Z,1528905337.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:37.464Z,1528905337.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:37.492Z,1528905337.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:37.863Z,1528905337.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:37.898Z,1528905337.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:38.280Z,1528905338.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:38.304Z,1528905338.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:38.683Z,1528905338.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:38.701Z,1528905338.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:39.084Z,1528905339.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:39.102Z,1528905339.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:39.459Z,1528905339.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:39.489Z,1528905339.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:39.867Z,1528905339.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:39.899Z,1528905339.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:40.263Z,1528905340.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:40.308Z,1528905340.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:40.664Z,1528905340.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:40.698Z,1528905340.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:41.063Z,1528905341.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:41.097Z,1528905341.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:41.477Z,1528905341.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:41.508Z,1528905341.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:41.878Z,1528905341.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:41.912Z,1528905341.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:42.274Z,1528905342.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:42.312Z,1528905342.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:42.663Z,1528905342.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:42.682Z,1528905342.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:43.063Z,1528905343.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:43.081Z,1528905343.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:43.467Z,1528905343.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:43.486Z,1528905343.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:43.867Z,1528905343.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:43.888Z,1528905343.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:44.269Z,1528905344.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:44.289Z,1528905344.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:44.681Z,1528905344.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:44.714Z,1528905344.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:45.081Z,1528905345.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:45.120Z,1528905345.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:45.466Z,1528905345.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:45.484Z,1528905345.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:45.862Z,1528905345.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:45.888Z,1528905345.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:46.270Z,1528905346.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:46.288Z,1528905346.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:46.670Z,1528905346.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:46.688Z,1528905346.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:47.071Z,1528905347.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:47.088Z,1528905347.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:47.477Z,1528905347.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:47.496Z,1528905347.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:47.877Z,1528905347.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:47.895Z,1528905347.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:48.274Z,1528905348.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:48.292Z,1528905348.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:48.670Z,1528905348.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:48.692Z,1528905348.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:49.063Z,1528905349.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:49.100Z,1528905349.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:49.468Z,1528905349.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:49.486Z,1528905349.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:49.869Z,1528905349.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:49.888Z,1528905349.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:50.274Z,1528905350.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:50.292Z,1528905350.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:50.677Z,1528905350.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:50.700Z,1528905350.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:51.077Z,1528905351.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:51.097Z,1528905351.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:51.468Z,1528905351.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:51.485Z,1528905351.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:51.868Z,1528905351.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:51.899Z,1528905351.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:52.269Z,1528905352.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:52.287Z,1528905352.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:52.669Z,1528905352.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:52.687Z,1528905352.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:53.067Z,1528905353.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:53.084Z,1528905353.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:53.477Z,1528905353.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:53.495Z,1528905353.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:53.878Z,1528905353.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:53.896Z,1528905353.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:54.274Z,1528905354.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:54.291Z,1528905354.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:54.669Z,1528905354.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:54.692Z,1528905354.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:55.068Z,1528905355.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:55.092Z,1528905355.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:55.468Z,1528905355.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:55.486Z,1528905355.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:55.869Z,1528905355.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:55.888Z,1528905355.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:56.273Z,1528905356.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:56.292Z,1528905356.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:56.681Z,1528905356.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:56.720Z,1528905356.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:57.077Z,1528905357.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:57.095Z,1528905357.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:57.469Z,1528905357.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:57.487Z,1528905357.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:57.867Z,1528905357.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:57.889Z,1528905357.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:58.277Z,1528905358.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:58.296Z,1528905358.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:58.677Z,1528905358.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:58.695Z,1528905358.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:59.074Z,1528905359.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:59.096Z,1528905359.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:59.471Z,1528905359.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:59.489Z,1528905359.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:55:59.869Z,1528905359.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:55:59.886Z,1528905359.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:00.274Z,1528905360.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:00.296Z,1528905360.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:00.678Z,1528905360.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:00.696Z,1528905360.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:01.074Z,1528905361.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:01.096Z,1528905361.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:01.467Z,1528905361.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:01.504Z,1528905361.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:01.867Z,1528905361.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:01.892Z,1528905361.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:02.279Z,1528905362.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:02.297Z,1528905362.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:02.682Z,1528905362.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:02.700Z,1528905362.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:03.082Z,1528905363.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:03.100Z,1528905363.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:03.471Z,1528905363.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:03.488Z,1528905363.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:03.866Z,1528905363.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:03.889Z,1528905363.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:04.284Z,1528905364.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:04.302Z,1528905364.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:04.683Z,1528905364.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:04.701Z,1528905364.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:05.079Z,1528905365.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:05.097Z,1528905365.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:05.464Z,1528905365.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:05.502Z,1528905365.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:05.863Z,1528905365.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:05.896Z,1528905365.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:06.280Z,1528905366.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:06.297Z,1528905366.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:06.684Z,1528905366.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:06.702Z,1528905366.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:07.079Z,1528905367.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:07.097Z,1528905367.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:07.464Z,1528905367.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:07.502Z,1528905367.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:07.863Z,1528905367.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:07.892Z,1528905367.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:08.284Z,1528905368.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:08.302Z,1528905368.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:08.683Z,1528905368.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:08.701Z,1528905368.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:09.084Z,1528905369.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:09.102Z,1528905369.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:09.464Z,1528905369.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:09.491Z,1528905369.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:09.863Z,1528905369.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:09.889Z,1528905369.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:10.285Z,1528905370.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:10.303Z,1528905370.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:10.683Z,1528905370.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:10.701Z,1528905370.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:11.083Z,1528905371.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:11.101Z,1528905371.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:11.468Z,1528905371.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:11.501Z,1528905371.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:14.567Z,1528905374.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:14.596Z,1528905374.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:14.736Z,1528905374.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:14.753Z,1528905374.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:15.136Z,1528905375.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:15.154Z,1528905375.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:15.531Z,1528905375.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:15.588Z,1528905375.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:15.911Z,1528905375.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:15.947Z,1528905375.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:16.311Z,1528905376.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:16.343Z,1528905376.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:16.712Z,1528905376.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:16.747Z,1528905376.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:17.111Z,1528905377.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:17.143Z,1528905377.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:17.532Z,1528905377.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:17.550Z,1528905377.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:17.928Z,1528905377.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:17.946Z,1528905377.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:18.331Z,1528905378.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:18.350Z,1528905378.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:18.711Z,1528905378.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:18.746Z,1528905378.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:19.112Z,1528905379.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:19.150Z,1528905379.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:19.512Z,1528905379.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:19.537Z,1528905379.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:19.911Z,1528905379.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:19.952Z,1528905379.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:20.325Z,1528905380.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:20.361Z,1528905380.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:20.729Z,1528905380.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:20.756Z,1528905380.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:21.130Z,1528905381.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:21.159Z,1528905381.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:21.515Z,1528905381.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:21.556Z,1528905381.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:21.914Z,1528905381.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:21.936Z,1528905381.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:22.314Z,1528905382.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:22.332Z,1528905382.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:22.711Z,1528905382.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:22.728Z,1528905382.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:23.114Z,1528905383.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:23.132Z,1528905383.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:23.525Z,1528905383.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:23.559Z,1528905383.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:23.929Z,1528905383.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:23.963Z,1528905383.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:24.325Z,1528905384.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:24.343Z,1528905384.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:24.718Z,1528905384.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:24.736Z,1528905384.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:25.111Z,1528905385.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:25.142Z,1528905385.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:25.516Z,1528905385.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:25.540Z,1528905385.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:25.918Z,1528905385.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:25.936Z,1528905385.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:26.326Z,1528905386.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:26.344Z,1528905386.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:26.726Z,1528905386.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:26.744Z,1528905386.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:27.126Z,1528905387.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:27.144Z,1528905387.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:27.514Z,1528905387.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:27.533Z,1528905387.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:27.917Z,1528905387.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:27.936Z,1528905387.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:28.329Z,1528905388.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:28.348Z,1528905388.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:28.729Z,1528905388.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:28.748Z,1528905388.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:29.123Z,1528905389.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:29.148Z,1528905389.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:29.518Z,1528905389.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:29.536Z,1528905389.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:29.911Z,1528905389.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:29.934Z,1528905389.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:30.323Z,1528905390.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:30.340Z,1528905390.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:30.726Z,1528905390.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:30.748Z,1528905390.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:31.122Z,1528905391.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:31.140Z,1528905391.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:31.515Z,1528905391.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:31.539Z,1528905391.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:31.914Z,1528905391.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:31.932Z,1528905391.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:32.320Z,1528905392.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:32.346Z,1528905392.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:32.727Z,1528905392.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:32.745Z,1528905392.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:33.128Z,1528905393.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:33.146Z,1528905393.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:33.518Z,1528905393.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:33.536Z,1528905393.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:33.915Z,1528905393.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:33.938Z,1528905393.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:34.326Z,1528905394.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:34.345Z,1528905394.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:34.726Z,1528905394.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:34.744Z,1528905394.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:35.126Z,1528905395.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:35.144Z,1528905395.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:35.519Z,1528905395.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:35.537Z,1528905395.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:35.911Z,1528905395.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:35.934Z,1528905395.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:36.326Z,1528905396.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:36.344Z,1528905396.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:36.726Z,1528905396.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:36.744Z,1528905396.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:37.122Z,1528905397.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:37.140Z,1528905397.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:37.515Z,1528905397.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:37.540Z,1528905397.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:37.917Z,1528905397.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:37.935Z,1528905397.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:38.326Z,1528905398.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:38.348Z,1528905398.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:38.726Z,1528905398.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:38.748Z,1528905398.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:39.126Z,1528905399.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:39.148Z,1528905399.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:39.518Z,1528905399.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:39.535Z,1528905399.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:39.915Z,1528905399.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:39.937Z,1528905399.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:40.327Z,1528905400.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:40.344Z,1528905400.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:40.726Z,1528905400.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:40.743Z,1528905400.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:41.126Z,1528905401.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:41.143Z,1528905401.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:41.514Z,1528905401.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:41.536Z,1528905401.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:41.911Z,1528905401.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:41.942Z,1528905401.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:42.327Z,1528905402.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:42.344Z,1528905402.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:42.726Z,1528905402.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:42.744Z,1528905402.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:43.124Z,1528905403.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:43.141Z,1528905403.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:43.515Z,1528905403.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:43.538Z,1528905403.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:43.917Z,1528905403.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:43.935Z,1528905403.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:44.326Z,1528905404.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:44.344Z,1528905404.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:44.726Z,1528905404.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:44.748Z,1528905404.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:45.129Z,1528905405.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:45.152Z,1528905405.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:45.518Z,1528905405.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:45.535Z,1528905405.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:45.915Z,1528905405.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:45.937Z,1528905405.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:46.326Z,1528905406.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:46.344Z,1528905406.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:46.726Z,1528905406.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:46.748Z,1528905406.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:47.127Z,1528905407.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:47.145Z,1528905407.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:47.514Z,1528905407.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:47.532Z,1528905407.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:47.910Z,1528905407.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:47.943Z,1528905407.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:48.326Z,1528905408.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:48.348Z,1528905408.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:48.726Z,1528905408.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:48.743Z,1528905408.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:49.127Z,1528905409.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:49.145Z,1528905409.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:49.515Z,1528905409.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:49.538Z,1528905409.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:49.918Z,1528905409.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:49.935Z,1528905409.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:50.326Z,1528905410.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:50.344Z,1528905410.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:50.726Z,1528905410.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:50.748Z,1528905410.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:51.126Z,1528905411.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:51.144Z,1528905411.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:51.522Z,1528905411.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:51.539Z,1528905411.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:51.915Z,1528905411.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:51.938Z,1528905411.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:52.326Z,1528905412.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:52.344Z,1528905412.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:52.725Z,1528905412.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:52.743Z,1528905412.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:53.126Z,1528905413.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:53.143Z,1528905413.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:53.518Z,1528905413.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:53.535Z,1528905413.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:53.917Z,1528905413.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:53.940Z,1528905413.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:54.326Z,1528905414.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:54.344Z,1528905414.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:54.727Z,1528905414.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:54.752Z,1528905414.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:55.125Z,1528905415.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:55.143Z,1528905415.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:55.517Z,1528905415.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:55.535Z,1528905415.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:55.922Z,1528905415.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:55.940Z,1528905415.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:56.326Z,1528905416.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:56.344Z,1528905416.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:56.725Z,1528905416.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:56.744Z,1528905416.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:57.127Z,1528905417.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:57.144Z,1528905417.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:57.522Z,1528905417.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:57.540Z,1528905417.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:57.915Z,1528905417.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:57.937Z,1528905417.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:58.329Z,1528905418.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:58.352Z,1528905418.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:58.727Z,1528905418.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:58.744Z,1528905418.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:59.126Z,1528905419.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:59.148Z,1528905419.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:59.518Z,1528905419.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:59.540Z,1528905419.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:56:59.917Z,1528905419.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:56:59.940Z,1528905419.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:00.327Z,1528905420.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:00.345Z,1528905420.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:00.729Z,1528905420.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:00.748Z,1528905420.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:01.126Z,1528905421.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:01.148Z,1528905421.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:01.519Z,1528905421.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:01.537Z,1528905421.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:01.922Z,1528905421.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:01.944Z,1528905421.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:02.326Z,1528905422.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:02.348Z,1528905422.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:02.726Z,1528905422.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:02.748Z,1528905422.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:03.127Z,1528905423.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:03.145Z,1528905423.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:03.518Z,1528905423.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:03.536Z,1528905423.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:03.919Z,1528905423.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:03.936Z,1528905423.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:04.318Z,1528905424.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:04.341Z,1528905424.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:04.726Z,1528905424.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:04.744Z,1528905424.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:05.126Z,1528905425.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:05.148Z,1528905425.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:05.530Z,1528905425.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:05.576Z,1528905425.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:05.921Z,1528905425.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:05.939Z,1528905425.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:06.318Z,1528905426.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:06.336Z,1528905426.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:06.715Z,1528905426.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:06.742Z,1528905426.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:07.120Z,1528905427.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:07.140Z,1528905427.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:07.526Z,1528905427.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:07.549Z,1528905427.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:07.927Z,1528905427.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:07.952Z,1528905427.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:08.328Z,1528905428.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:08.345Z,1528905428.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:08.721Z,1528905428.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:08.739Z,1528905428.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:09.124Z,1528905429.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:09.142Z,1528905429.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:09.511Z,1528905429.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:09.535Z,1528905429.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:09.912Z,1528905429.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:09.950Z,1528905429.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:10.322Z,1528905430.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:10.354Z,1528905430.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:10.726Z,1528905430.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:10.744Z,1528905430.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:11.130Z,1528905431.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:11.148Z,1528905431.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:11.530Z,1528905431.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:11.548Z,1528905431.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:11.920Z,1528905431.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:11.939Z,1528905431.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:12.321Z,1528905432.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:12.339Z,1528905432.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:12.722Z,1528905432.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:12.741Z,1528905432.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:13.122Z,1528905433.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:13.144Z,1528905433.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:13.528Z,1528905433.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:13.547Z,1528905433.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:13.929Z,1528905433.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:13.948Z,1528905433.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:14.326Z,1528905434.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:14.344Z,1528905434.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:14.721Z,1528905434.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:14.738Z,1528905434.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:17.837Z,1528905437.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:17.855Z,1528905437.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:17.996Z,1528905437.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:18.030Z,1528905438.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:18.414Z,1528905438.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:18.438Z,1528905438.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:18.824Z,1528905438.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:18.847Z,1528905438.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:19.220Z,1528905439.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:19.238Z,1528905439.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:19.599Z,1528905439.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:19.636Z,1528905439.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:19.999Z,1528905439.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:20.031Z,1528905440.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:20.399Z,1528905440.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:20.437Z,1528905440.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:20.800Z,1528905440.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:20.838Z,1528905440.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:21.199Z,1528905441.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:21.233Z,1528905441.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:21.605Z,1528905441.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:21.644Z,1528905441.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:22.013Z,1528905442.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:22.050Z,1528905442.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:22.413Z,1528905442.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:22.451Z,1528905442.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:22.795Z,1528905442.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:22.812Z,1528905442.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:23.200Z,1528905443.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:23.248Z,1528905443.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:23.600Z,1528905443.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:23.640Z,1528905443.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:23.996Z,1528905443.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:24.014Z,1528905444.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:24.413Z,1528905444.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:24.446Z,1528905444.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:24.813Z,1528905444.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:24.851Z,1528905444.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:25.214Z,1528905445.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:25.251Z,1528905445.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:25.602Z,1528905445.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:25.624Z,1528905445.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:26.002Z,1528905446.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:26.020Z,1528905446.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:26.413Z,1528905446.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:26.447Z,1528905446.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:26.813Z,1528905446.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:26.831Z,1528905446.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:27.213Z,1528905447.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:27.232Z,1528905447.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:27.604Z,1528905447.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:27.622Z,1528905447.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:28.004Z,1528905448.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:28.028Z,1528905448.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:28.413Z,1528905448.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:28.431Z,1528905448.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:28.813Z,1528905448.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:28.831Z,1528905448.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:29.212Z,1528905449.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:29.280Z,1528905449.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:29.603Z,1528905449.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:29.636Z,1528905449.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:30.006Z,1528905450.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:30.028Z,1528905450.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:30.410Z,1528905450.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:30.432Z,1528905450.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:30.813Z,1528905450.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:30.836Z,1528905450.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:31.210Z,1528905451.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:31.232Z,1528905451.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:31.605Z,1528905451.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:31.623Z,1528905451.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:32.003Z,1528905452.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:32.033Z,1528905452.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:32.414Z,1528905452.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:32.432Z,1528905452.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:32.817Z,1528905452.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:32.835Z,1528905452.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:33.215Z,1528905453.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:33.232Z,1528905453.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:33.599Z,1528905453.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:33.623Z,1528905453.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:34.003Z,1528905454.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:34.025Z,1528905454.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:34.414Z,1528905454.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:34.440Z,1528905454.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:34.815Z,1528905454.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:34.840Z,1528905454.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:35.215Z,1528905455.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:35.240Z,1528905455.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:35.606Z,1528905455.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:35.629Z,1528905455.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:36.005Z,1528905456.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:36.022Z,1528905456.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:36.414Z,1528905456.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:36.432Z,1528905456.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:36.815Z,1528905456.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:36.833Z,1528905456.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:37.214Z,1528905457.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:37.232Z,1528905457.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:37.606Z,1528905457.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:37.623Z,1528905457.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:38.003Z,1528905458.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:38.027Z,1528905458.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:38.414Z,1528905458.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:38.432Z,1528905458.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:38.814Z,1528905458.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:38.837Z,1528905458.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:39.215Z,1528905459.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:39.240Z,1528905459.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:39.607Z,1528905459.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:39.625Z,1528905459.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:40.003Z,1528905460.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:40.039Z,1528905460.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:40.415Z,1528905460.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:40.433Z,1528905460.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:40.814Z,1528905460.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:40.836Z,1528905460.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:41.215Z,1528905461.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:41.312Z,1528905461.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:41.607Z,1528905461.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:41.625Z,1528905461.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:42.005Z,1528905462.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:42.022Z,1528905462.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:42.414Z,1528905462.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:42.432Z,1528905462.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:42.815Z,1528905462.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:42.840Z,1528905462.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:43.214Z,1528905463.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:43.232Z,1528905463.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:43.603Z,1528905463.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:43.627Z,1528905463.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:44.003Z,1528905464.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:44.027Z,1528905464.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:44.413Z,1528905464.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:44.431Z,1528905464.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:44.814Z,1528905464.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:44.836Z,1528905464.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:45.214Z,1528905465.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:45.240Z,1528905465.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:45.605Z,1528905465.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:45.623Z,1528905465.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:46.003Z,1528905466.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:46.025Z,1528905466.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:46.416Z,1528905466.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:46.435Z,1528905466.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:46.815Z,1528905466.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:46.832Z,1528905466.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:47.217Z,1528905467.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:47.235Z,1528905467.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:47.606Z,1528905467.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:47.628Z,1528905467.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:48.001Z,1528905468.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:48.019Z,1528905468.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:48.416Z,1528905468.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:48.440Z,1528905468.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:48.817Z,1528905468.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:48.835Z,1528905468.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:49.215Z,1528905469.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:49.232Z,1528905469.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:49.604Z,1528905469.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:49.629Z,1528905469.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:50.003Z,1528905470.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:50.029Z,1528905470.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:50.415Z,1528905470.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:50.434Z,1528905470.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:50.814Z,1528905470.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:50.836Z,1528905470.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:51.215Z,1528905471.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:51.234Z,1528905471.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:51.606Z,1528905471.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:51.624Z,1528905471.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:52.003Z,1528905472.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:52.026Z,1528905472.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:52.415Z,1528905472.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:52.440Z,1528905472.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:52.818Z,1528905472.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:52.844Z,1528905472.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:53.215Z,1528905473.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:53.234Z,1528905473.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:53.610Z,1528905473.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:53.628Z,1528905473.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:54.006Z,1528905474.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:54.028Z,1528905474.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:54.415Z,1528905474.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:54.433Z,1528905474.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:54.819Z,1528905474.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:54.838Z,1528905474.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:55.216Z,1528905475.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:55.240Z,1528905475.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:55.610Z,1528905475.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:55.627Z,1528905475.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:56.010Z,1528905476.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:56.028Z,1528905476.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:56.420Z,1528905476.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:56.438Z,1528905476.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:56.818Z,1528905476.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:56.840Z,1528905476.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:57.220Z,1528905477.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:57.238Z,1528905477.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:57.607Z,1528905477.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:57.625Z,1528905477.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:58.007Z,1528905478.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:58.032Z,1528905478.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:58.420Z,1528905478.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:58.444Z,1528905478.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:58.816Z,1528905478.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:58.834Z,1528905478.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:59.215Z,1528905479.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:59.233Z,1528905479.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:57:59.610Z,1528905479.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:57:59.629Z,1528905479.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:00.006Z,1528905480.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:00.025Z,1528905480.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:00.414Z,1528905480.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:00.440Z,1528905480.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:00.821Z,1528905480.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:00.844Z,1528905480.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:01.215Z,1528905481.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:01.234Z,1528905481.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:01.603Z,1528905481.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:01.631Z,1528905481.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:02.003Z,1528905482.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:02.046Z,1528905482.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:02.409Z,1528905482.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:02.436Z,1528905482.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:02.813Z,1528905482.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:02.849Z,1528905482.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:03.224Z,1528905483.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:03.242Z,1528905483.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:03.603Z,1528905483.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:03.641Z,1528905483.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:03.000Z,1528905484.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:04.017Z,1528905484.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:04.403Z,1528905484.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:04.444Z,1528905484.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:04.818Z,1528905484.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:04.850Z,1528905484.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:05.217Z,1528905485.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:05.250Z,1528905485.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:05.613Z,1528905485.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:05.647Z,1528905485.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:06.002Z,1528905486.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:06.019Z,1528905486.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:06.408Z,1528905486.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:06.426Z,1528905486.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:06.806Z,1528905486.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:06.832Z,1528905486.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:07.204Z,1528905487.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:07.228Z,1528905487.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:07.617Z,1528905487.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:07.635Z,1528905487.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:08.013Z,1528905488.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:08.031Z,1528905488.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:08.414Z,1528905488.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:08.431Z,1528905488.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:08.803Z,1528905488.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:08.830Z,1528905488.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:09.199Z,1528905489.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:09.237Z,1528905489.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:09.599Z,1528905489.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:09.635Z,1528905489.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:10.004Z,1528905490.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:10.036Z,1528905490.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:10.399Z,1528905490.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:10.432Z,1528905490.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:10.816Z,1528905490.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:10.834Z,1528905490.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:11.223Z,1528905491.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:11.241Z,1528905491.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:11.621Z,1528905491.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:11.639Z,1528905491.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:12.007Z,1528905492.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:12.034Z,1528905492.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:12.403Z,1528905492.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:12.430Z,1528905492.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:12.807Z,1528905492.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:12.835Z,1528905492.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:13.206Z,1528905493.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:13.233Z,1528905493.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:13.619Z,1528905493.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:13.637Z,1528905493.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:14.024Z,1528905494.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:14.042Z,1528905494.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:14.414Z,1528905494.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:14.448Z,1528905494.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:14.806Z,1528905494.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:14.833Z,1528905494.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:15.203Z,1528905495.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:15.232Z,1528905495.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:18.319Z,1528905498.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:18.337Z,1528905498.337 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:18.337Z,1528905498.337 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 250
2018-06-13T15:58:18.337Z,1528905498.337 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T15:58:18.339Z,1528905498.339 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:18.339Z,1528905498.339 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 250
2018-06-13T15:58:18.339Z,1528905498.339 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T15:58:18.340Z,1528905498.340 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:18.341Z,1528905498.341 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 250
2018-06-13T15:58:18.341Z,1528905498.341 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T15:58:18.422Z,1528905498.422 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T15:58:18.422Z,1528905498.422 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T15:58:18.422Z,1528905498.422 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T15:58:18.468Z,1528905498.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:18.581Z,1528905498.581 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T15:58:18.581Z,1528905498.581 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 250
2018-06-13T15:58:18.582Z,1528905498.582 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T15:58:18.582Z,1528905498.582 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 250
2018-06-13T15:58:18.582Z,1528905498.582 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T15:58:18.582Z,1528905498.582 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 250
2018-06-13T15:58:18.866Z,1528905498.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:18.892Z,1528905498.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T15:58:18.892Z,1528905498.892 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:58:18.892Z,1528905498.892 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:58:18.893Z,1528905498.893 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T15:58:18.893Z,1528905498.893 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:58:18.894Z,1528905498.894 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:58:18.894Z,1528905498.894 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T15:58:18.894Z,1528905498.894 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T15:58:18.895Z,1528905498.895 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T15:58:19.265Z,1528905499.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:19.295Z,1528905499.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T15:58:19.296Z,1528905499.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:19.665Z,1528905499.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:19.698Z,1528905499.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T15:58:19.699Z,1528905499.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:20.054Z,1528905500.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:20.072Z,1528905500.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T15:58:20.073Z,1528905500.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:20.455Z,1528905500.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:20.472Z,1528905500.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T15:58:20.473Z,1528905500.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:20.854Z,1528905500.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:20.872Z,1528905500.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T15:58:20.873Z,1528905500.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:21.254Z,1528905501.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:21.272Z,1528905501.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T15:58:21.273Z,1528905501.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:21.661Z,1528905501.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:21.700Z,1528905501.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T15:58:21.705Z,1528905501.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:22.065Z,1528905502.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:22.083Z,1528905502.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T15:58:22.083Z,1528905502.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:22.466Z,1528905502.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:22.484Z,1528905502.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T15:58:22.485Z,1528905502.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:22.857Z,1528905502.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:22.874Z,1528905502.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T15:58:22.875Z,1528905502.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:23.256Z,1528905503.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:23.274Z,1528905503.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T15:58:23.275Z,1528905503.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:23.658Z,1528905503.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:23.675Z,1528905503.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T15:58:23.676Z,1528905503.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:24.057Z,1528905504.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:24.074Z,1528905504.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T15:58:24.075Z,1528905504.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:24.462Z,1528905504.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:24.480Z,1528905504.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T15:58:24.482Z,1528905504.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:24.862Z,1528905504.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:24.880Z,1528905504.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T15:58:24.881Z,1528905504.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:25.266Z,1528905505.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:25.288Z,1528905505.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T15:58:25.288Z,1528905505.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:25.658Z,1528905505.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:25.675Z,1528905505.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T15:58:25.676Z,1528905505.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:26.055Z,1528905506.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:26.089Z,1528905506.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T15:58:26.090Z,1528905506.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:26.463Z,1528905506.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:26.481Z,1528905506.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T15:58:26.482Z,1528905506.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:26.866Z,1528905506.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:26.888Z,1528905506.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T15:58:26.889Z,1528905506.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:27.271Z,1528905507.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:27.288Z,1528905507.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T15:58:27.289Z,1528905507.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:27.658Z,1528905507.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:27.675Z,1528905507.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T15:58:27.676Z,1528905507.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:28.055Z,1528905508.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:28.077Z,1528905508.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T15:58:28.078Z,1528905508.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:28.466Z,1528905508.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:28.492Z,1528905508.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T15:58:28.493Z,1528905508.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:28.870Z,1528905508.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:28.887Z,1528905508.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T15:58:28.888Z,1528905508.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:29.267Z,1528905509.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:29.292Z,1528905509.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T15:58:29.293Z,1528905509.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:29.659Z,1528905509.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:29.677Z,1528905509.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T15:58:29.678Z,1528905509.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:30.047Z,1528905510.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:30.080Z,1528905510.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T15:58:30.090Z,1528905510.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:30.472Z,1528905510.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:30.489Z,1528905510.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T15:58:30.490Z,1528905510.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:30.872Z,1528905510.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:30.890Z,1528905510.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T15:58:30.891Z,1528905510.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:31.268Z,1528905511.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:31.292Z,1528905511.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T15:58:31.294Z,1528905511.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:31.652Z,1528905511.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:31.681Z,1528905511.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T15:58:31.682Z,1528905511.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:32.056Z,1528905512.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:32.088Z,1528905512.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T15:58:32.089Z,1528905512.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:32.468Z,1528905512.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:32.486Z,1528905512.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T15:58:32.486Z,1528905512.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:32.872Z,1528905512.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:32.889Z,1528905512.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T15:58:32.890Z,1528905512.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:33.265Z,1528905513.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:33.306Z,1528905513.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T15:58:33.307Z,1528905513.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:33.652Z,1528905513.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:33.683Z,1528905513.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T15:58:33.684Z,1528905513.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:34.052Z,1528905514.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:34.084Z,1528905514.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T15:58:34.085Z,1528905514.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:34.451Z,1528905514.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:34.485Z,1528905514.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T15:58:34.486Z,1528905514.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:34.869Z,1528905514.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:34.886Z,1528905514.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T15:58:34.887Z,1528905514.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:35.276Z,1528905515.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:35.294Z,1528905515.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T15:58:35.295Z,1528905515.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:35.677Z,1528905515.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:35.695Z,1528905515.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T15:58:35.696Z,1528905515.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:36.047Z,1528905516.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:36.080Z,1528905516.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T15:58:36.085Z,1528905516.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:36.451Z,1528905516.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:36.484Z,1528905516.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T15:58:36.489Z,1528905516.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:36.857Z,1528905516.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:36.895Z,1528905516.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T15:58:36.896Z,1528905516.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:37.255Z,1528905517.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:37.298Z,1528905517.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T15:58:37.299Z,1528905517.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:37.661Z,1528905517.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:37.700Z,1528905517.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T15:58:37.701Z,1528905517.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:38.065Z,1528905518.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:38.107Z,1528905518.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T15:58:38.108Z,1528905518.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:38.461Z,1528905518.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:38.496Z,1528905518.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:38.855Z,1528905518.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:38.873Z,1528905518.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:39.254Z,1528905519.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:39.272Z,1528905519.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:39.651Z,1528905519.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:39.668Z,1528905519.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:40.060Z,1528905520.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:40.078Z,1528905520.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:40.459Z,1528905520.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:40.477Z,1528905520.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:40.866Z,1528905520.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:40.905Z,1528905520.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:41.270Z,1528905521.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:41.303Z,1528905521.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:41.678Z,1528905521.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:41.711Z,1528905521.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:42.058Z,1528905522.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:42.076Z,1528905522.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:42.459Z,1528905522.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:42.476Z,1528905522.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:42.858Z,1528905522.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:42.876Z,1528905522.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:43.253Z,1528905523.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:43.299Z,1528905523.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:43.671Z,1528905523.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:43.705Z,1528905523.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:44.070Z,1528905524.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:44.088Z,1528905524.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:44.463Z,1528905524.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:44.481Z,1528905524.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:44.861Z,1528905524.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:44.879Z,1528905524.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:45.256Z,1528905525.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:45.276Z,1528905525.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:45.657Z,1528905525.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:45.676Z,1528905525.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:46.057Z,1528905526.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:46.075Z,1528905526.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:46.458Z,1528905526.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:46.476Z,1528905526.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:46.862Z,1528905526.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:46.884Z,1528905526.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:47.292Z,1528905527.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:47.320Z,1528905527.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:47.662Z,1528905527.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:47.680Z,1528905527.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:48.054Z,1528905528.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:48.078Z,1528905528.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:48.460Z,1528905528.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:48.492Z,1528905528.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:48.860Z,1528905528.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:48.878Z,1528905528.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:49.257Z,1528905529.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:49.275Z,1528905529.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:49.670Z,1528905529.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:49.688Z,1528905529.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:50.068Z,1528905530.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:50.086Z,1528905530.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:50.467Z,1528905530.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:50.492Z,1528905530.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:50.861Z,1528905530.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:50.879Z,1528905530.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:51.262Z,1528905531.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:51.279Z,1528905531.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:51.651Z,1528905531.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:51.677Z,1528905531.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:52.060Z,1528905532.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:52.079Z,1528905532.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:52.461Z,1528905532.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:52.479Z,1528905532.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:52.865Z,1528905532.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:52.888Z,1528905532.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:53.270Z,1528905533.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:53.288Z,1528905533.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:53.666Z,1528905533.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:53.684Z,1528905533.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:54.058Z,1528905534.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:54.076Z,1528905534.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:54.455Z,1528905534.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:54.482Z,1528905534.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:54.863Z,1528905534.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:54.880Z,1528905534.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:55.252Z,1528905535.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:55.280Z,1528905535.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:55.670Z,1528905535.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:55.687Z,1528905535.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:56.070Z,1528905536.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:56.087Z,1528905536.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:56.467Z,1528905536.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:56.492Z,1528905536.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:56.856Z,1528905536.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:56.883Z,1528905536.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:57.260Z,1528905537.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:57.278Z,1528905537.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:57.657Z,1528905537.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:57.696Z,1528905537.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:58.061Z,1528905538.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:58.096Z,1528905538.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:58.454Z,1528905538.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:58.486Z,1528905538.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:58.866Z,1528905538.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:58.888Z,1528905538.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:59.267Z,1528905539.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:59.288Z,1528905539.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:58:59.669Z,1528905539.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:58:59.686Z,1528905539.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:00.061Z,1528905540.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:00.079Z,1528905540.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:00.458Z,1528905540.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:00.489Z,1528905540.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:00.859Z,1528905540.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:00.889Z,1528905540.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:01.258Z,1528905541.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:01.296Z,1528905541.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:01.670Z,1528905541.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:01.692Z,1528905541.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:02.067Z,1528905542.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:02.086Z,1528905542.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:02.466Z,1528905542.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:02.489Z,1528905542.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:02.863Z,1528905542.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:02.888Z,1528905542.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:03.261Z,1528905543.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:03.279Z,1528905543.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:03.660Z,1528905543.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:03.678Z,1528905543.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:04.055Z,1528905544.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:04.110Z,1528905544.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:04.457Z,1528905544.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:04.480Z,1528905544.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:04.870Z,1528905544.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:04.888Z,1528905544.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:05.269Z,1528905545.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:05.287Z,1528905545.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:05.667Z,1528905545.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:05.709Z,1528905545.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:06.057Z,1528905546.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:06.092Z,1528905546.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:06.458Z,1528905546.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:06.514Z,1528905546.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:06.863Z,1528905546.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:06.887Z,1528905546.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:07.257Z,1528905547.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:07.292Z,1528905547.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:07.668Z,1528905547.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:07.696Z,1528905547.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:08.068Z,1528905548.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:08.092Z,1528905548.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:08.470Z,1528905548.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:08.488Z,1528905548.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:08.855Z,1528905548.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:08.910Z,1528905548.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:09.259Z,1528905549.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:09.282Z,1528905549.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:09.658Z,1528905549.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:09.681Z,1528905549.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:10.056Z,1528905550.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:10.082Z,1528905550.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:10.455Z,1528905550.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:10.491Z,1528905550.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:10.867Z,1528905550.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:10.889Z,1528905550.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:11.272Z,1528905551.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:11.296Z,1528905551.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:11.322Z,1528905551.322 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T15:59:11.322Z,1528905551.322 [Default:CheckIn:C.Wait] Stopped
2018-06-13T15:59:11.322Z,1528905551.322 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T15:59:11.322Z,1528905551.322 [Default:CheckIn:D] Running Loop=1
2018-06-13T15:59:11.671Z,1528905551.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:11.689Z,1528905551.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:11.692Z,1528905551.692 [Default:CheckIn:D] Stopped
2018-06-13T15:59:11.692Z,1528905551.692 [Default:CheckIn:E] Running Loop=1
2018-06-13T15:59:14.775Z,1528905554.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:14.793Z,1528905554.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:14.796Z,1528905554.796 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 751.970768 min 
2018-06-13T15:59:14.813Z,1528905554.813 [Default:CheckIn:E] Stopped
2018-06-13T15:59:14.813Z,1528905554.813 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T15:59:14.813Z,1528905554.813 [Default:CheckIn] Stopped
2018-06-13T15:59:14.813Z,1528905554.813 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T15:59:14.813Z,1528905554.813 [Default:CheckIn](INFO): Running loop #73
2018-06-13T15:59:14.813Z,1528905554.813 [Default:CheckIn] Running Loop=73
2018-06-13T15:59:14.814Z,1528905554.814 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T15:59:14.814Z,1528905554.814 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T15:59:14.935Z,1528905554.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:14.975Z,1528905554.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:15.345Z,1528905555.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:15.374Z,1528905555.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:15.749Z,1528905555.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:15.784Z,1528905555.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:16.141Z,1528905556.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:16.176Z,1528905556.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:16.531Z,1528905556.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:16.549Z,1528905556.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:16.928Z,1528905556.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:16.945Z,1528905556.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:17.330Z,1528905557.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:17.348Z,1528905557.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:17.737Z,1528905557.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:17.778Z,1528905557.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:18.141Z,1528905558.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:18.174Z,1528905558.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:18.541Z,1528905558.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:18.575Z,1528905558.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:18.930Z,1528905558.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:18.979Z,1528905558.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:19.330Z,1528905559.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:19.348Z,1528905559.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:19.732Z,1528905559.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:19.749Z,1528905559.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:20.135Z,1528905560.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:20.178Z,1528905560.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:20.542Z,1528905560.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:20.574Z,1528905560.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:20.942Z,1528905560.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:20.975Z,1528905560.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:21.342Z,1528905561.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:21.375Z,1528905561.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:21.732Z,1528905561.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:21.751Z,1528905561.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:22.130Z,1528905562.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:22.148Z,1528905562.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:22.545Z,1528905562.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:22.579Z,1528905562.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:22.941Z,1528905562.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:22.981Z,1528905562.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:23.341Z,1528905563.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:23.371Z,1528905563.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:23.734Z,1528905563.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:23.760Z,1528905563.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:24.129Z,1528905564.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:24.147Z,1528905564.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:24.542Z,1528905564.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:24.559Z,1528905564.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:24.949Z,1528905564.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:24.988Z,1528905564.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:25.350Z,1528905565.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:25.388Z,1528905565.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:25.731Z,1528905565.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:25.761Z,1528905565.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:26.131Z,1528905566.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:26.157Z,1528905566.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:26.539Z,1528905566.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:26.564Z,1528905566.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:26.942Z,1528905566.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:26.964Z,1528905566.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:27.344Z,1528905567.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:27.368Z,1528905567.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:27.740Z,1528905567.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:27.779Z,1528905567.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:28.137Z,1528905568.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:28.155Z,1528905568.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:28.540Z,1528905568.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:28.558Z,1528905568.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:28.935Z,1528905568.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:28.952Z,1528905568.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:29.331Z,1528905569.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:29.355Z,1528905569.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:29.744Z,1528905569.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:29.761Z,1528905569.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:30.143Z,1528905570.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:30.160Z,1528905570.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:30.540Z,1528905570.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:30.566Z,1528905570.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:30.931Z,1528905570.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:30.953Z,1528905570.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:31.336Z,1528905571.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:31.355Z,1528905571.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:31.731Z,1528905571.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:31.764Z,1528905571.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:32.132Z,1528905572.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:32.160Z,1528905572.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:32.523Z,1528905572.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:32.560Z,1528905572.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:32.944Z,1528905572.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:32.963Z,1528905572.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:33.348Z,1528905573.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:33.367Z,1528905573.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:33.742Z,1528905573.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:33.760Z,1528905573.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:34.127Z,1528905574.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:34.162Z,1528905574.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:34.530Z,1528905574.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:34.568Z,1528905574.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:34.926Z,1528905574.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:34.963Z,1528905574.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:35.331Z,1528905575.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:35.363Z,1528905575.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:35.748Z,1528905575.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:35.767Z,1528905575.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:36.140Z,1528905576.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:36.170Z,1528905576.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:36.547Z,1528905576.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:36.565Z,1528905576.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:36.928Z,1528905576.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:36.962Z,1528905576.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:37.331Z,1528905577.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:37.364Z,1528905577.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:37.729Z,1528905577.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:37.771Z,1528905577.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:38.130Z,1528905578.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:38.148Z,1528905578.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:38.528Z,1528905578.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:38.546Z,1528905578.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:38.945Z,1528905578.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:38.973Z,1528905578.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:39.347Z,1528905579.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:39.375Z,1528905579.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:39.739Z,1528905579.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:39.772Z,1528905579.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:40.133Z,1528905580.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:40.151Z,1528905580.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:40.530Z,1528905580.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:40.548Z,1528905580.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:40.934Z,1528905580.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:40.953Z,1528905580.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:41.333Z,1528905581.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:41.350Z,1528905581.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:41.745Z,1528905581.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:41.780Z,1528905581.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:42.149Z,1528905582.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:42.175Z,1528905582.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:42.544Z,1528905582.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:42.582Z,1528905582.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:42.932Z,1528905582.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:42.951Z,1528905582.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:43.334Z,1528905583.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:43.352Z,1528905583.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:43.739Z,1528905583.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:43.756Z,1528905583.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:44.130Z,1528905584.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:44.153Z,1528905584.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:44.529Z,1528905584.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:44.554Z,1528905584.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:44.938Z,1528905584.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:44.956Z,1528905584.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:45.349Z,1528905585.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:45.382Z,1528905585.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:45.736Z,1528905585.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:45.757Z,1528905585.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:46.134Z,1528905586.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:46.152Z,1528905586.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:46.537Z,1528905586.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:46.555Z,1528905586.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:46.932Z,1528905586.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:46.950Z,1528905586.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:47.332Z,1528905587.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:47.382Z,1528905587.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:47.743Z,1528905587.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:47.788Z,1528905587.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:48.142Z,1528905588.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:48.164Z,1528905588.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:48.545Z,1528905588.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:48.563Z,1528905588.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:48.934Z,1528905588.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:48.979Z,1528905588.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:49.334Z,1528905589.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:49.378Z,1528905589.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:49.736Z,1528905589.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:49.754Z,1528905589.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:50.138Z,1528905590.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:50.156Z,1528905590.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:50.527Z,1528905590.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:50.564Z,1528905590.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:50.940Z,1528905590.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:50.964Z,1528905590.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:51.343Z,1528905591.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:51.361Z,1528905591.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:51.741Z,1528905591.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:51.759Z,1528905591.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:52.133Z,1528905592.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:52.181Z,1528905592.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:52.536Z,1528905592.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:52.558Z,1528905592.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:52.928Z,1528905592.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:52.955Z,1528905592.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:53.336Z,1528905593.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:53.354Z,1528905593.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:53.742Z,1528905593.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:53.791Z,1528905593.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:54.143Z,1528905594.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:54.184Z,1528905594.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:54.540Z,1528905594.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:54.559Z,1528905594.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:54.934Z,1528905594.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:54.975Z,1528905594.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:55.331Z,1528905595.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:55.382Z,1528905595.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:55.733Z,1528905595.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:55.760Z,1528905595.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:56.137Z,1528905596.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:56.157Z,1528905596.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:56.527Z,1528905596.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:56.559Z,1528905596.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:56.943Z,1528905596.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:56.989Z,1528905596.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:57.347Z,1528905597.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:57.367Z,1528905597.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:57.742Z,1528905597.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:57.760Z,1528905597.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:58.133Z,1528905598.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:58.169Z,1528905598.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:58.535Z,1528905598.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:58.572Z,1528905598.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:58.935Z,1528905598.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:58.958Z,1528905598.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:59.331Z,1528905599.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:59.368Z,1528905599.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T15:59:59.746Z,1528905599.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T15:59:59.764Z,1528905599.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:00.143Z,1528905600.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:00.187Z,1528905600.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:00.542Z,1528905600.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:00.565Z,1528905600.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:00.934Z,1528905600.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:00.957Z,1528905600.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:01.326Z,1528905601.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:01.363Z,1528905601.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:01.731Z,1528905601.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:01.774Z,1528905601.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:02.135Z,1528905602.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:02.159Z,1528905602.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:02.533Z,1528905602.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:02.556Z,1528905602.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:02.945Z,1528905602.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:02.964Z,1528905602.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:03.347Z,1528905603.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:03.393Z,1528905603.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:03.743Z,1528905603.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:03.765Z,1528905603.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:04.132Z,1528905604.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:04.160Z,1528905604.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:04.534Z,1528905604.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:04.557Z,1528905604.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:04.935Z,1528905604.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:04.973Z,1528905604.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:05.333Z,1528905605.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:05.354Z,1528905605.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:05.749Z,1528905605.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:05.770Z,1528905605.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:06.148Z,1528905606.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:06.172Z,1528905606.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:06.543Z,1528905606.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:06.591Z,1528905606.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:06.939Z,1528905606.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:06.958Z,1528905606.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:07.324Z,1528905607.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:07.367Z,1528905607.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:07.723Z,1528905607.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:07.760Z,1528905607.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:08.128Z,1528905608.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:08.163Z,1528905608.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:08.528Z,1528905608.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:08.568Z,1528905608.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:08.939Z,1528905608.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:08.971Z,1528905608.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:09.346Z,1528905609.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:09.383Z,1528905609.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:09.738Z,1528905609.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:09.786Z,1528905609.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:10.127Z,1528905610.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:10.161Z,1528905610.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:10.527Z,1528905610.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:10.546Z,1528905610.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:10.928Z,1528905610.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:10.979Z,1528905610.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:11.331Z,1528905611.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:11.349Z,1528905611.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:11.745Z,1528905611.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:11.785Z,1528905611.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:14.865Z,1528905614.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:14.888Z,1528905614.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:15.025Z,1528905615.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:15.043Z,1528905615.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:15.404Z,1528905615.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:15.432Z,1528905615.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:15.814Z,1528905615.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:15.831Z,1528905615.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:16.212Z,1528905616.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:16.230Z,1528905616.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:16.604Z,1528905616.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:16.640Z,1528905616.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:17.020Z,1528905617.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:17.038Z,1528905617.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:17.418Z,1528905617.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:17.450Z,1528905617.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:17.818Z,1528905617.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:17.852Z,1528905617.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:18.204Z,1528905618.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:18.233Z,1528905618.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:18.603Z,1528905618.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:18.636Z,1528905618.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:19.000Z,1528905619.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:19.039Z,1528905619.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:19.401Z,1528905619.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:19.434Z,1528905619.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:19.818Z,1528905619.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:19.850Z,1528905619.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:20.227Z,1528905620.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:20.287Z,1528905620.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:20.617Z,1528905620.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:20.635Z,1528905620.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:21.002Z,1528905621.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:21.035Z,1528905621.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:21.403Z,1528905621.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:21.447Z,1528905621.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:21.804Z,1528905621.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:21.831Z,1528905621.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:22.204Z,1528905622.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:22.231Z,1528905622.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:22.603Z,1528905622.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:22.637Z,1528905622.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:23.021Z,1528905623.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:23.044Z,1528905623.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:23.418Z,1528905623.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:23.447Z,1528905623.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:23.815Z,1528905623.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:23.856Z,1528905623.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:24.205Z,1528905624.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:24.243Z,1528905624.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:24.603Z,1528905624.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:24.640Z,1528905624.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:25.005Z,1528905625.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:25.023Z,1528905625.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:25.402Z,1528905625.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:25.419Z,1528905625.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:25.819Z,1528905625.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:25.838Z,1528905625.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:26.218Z,1528905626.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:26.250Z,1528905626.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:26.621Z,1528905626.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:26.639Z,1528905626.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:27.003Z,1528905627.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:27.031Z,1528905627.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:27.401Z,1528905627.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:27.434Z,1528905627.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:27.798Z,1528905627.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:27.816Z,1528905627.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:28.204Z,1528905628.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:28.237Z,1528905628.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:28.608Z,1528905628.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:28.642Z,1528905628.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:29.016Z,1528905629.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:29.054Z,1528905629.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:29.415Z,1528905629.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:29.449Z,1528905629.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:29.814Z,1528905629.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:29.832Z,1528905629.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:30.207Z,1528905630.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:30.225Z,1528905630.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:30.604Z,1528905630.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:30.645Z,1528905630.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:31.009Z,1528905631.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:31.039Z,1528905631.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:31.410Z,1528905631.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:31.428Z,1528905631.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:31.818Z,1528905631.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:31.840Z,1528905631.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:32.224Z,1528905632.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:32.242Z,1528905632.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:32.621Z,1528905632.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:32.639Z,1528905632.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:33.003Z,1528905633.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:33.028Z,1528905633.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:33.408Z,1528905633.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:33.443Z,1528905633.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:33.799Z,1528905633.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:33.833Z,1528905633.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:34.199Z,1528905634.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:34.236Z,1528905634.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:34.606Z,1528905634.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:34.644Z,1528905634.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:35.021Z,1528905635.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:35.044Z,1528905635.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:35.418Z,1528905635.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:35.458Z,1528905635.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:35.816Z,1528905635.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:35.850Z,1528905635.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:36.204Z,1528905636.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:36.222Z,1528905636.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:36.606Z,1528905636.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:36.624Z,1528905636.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:37.003Z,1528905637.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:37.052Z,1528905637.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:37.405Z,1528905637.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:37.427Z,1528905637.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:37.813Z,1528905637.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:37.831Z,1528905637.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:38.218Z,1528905638.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:38.236Z,1528905638.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:38.610Z,1528905638.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:38.656Z,1528905638.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:39.005Z,1528905639.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:39.058Z,1528905639.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:39.408Z,1528905639.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:39.426Z,1528905639.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:39.801Z,1528905639.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:39.827Z,1528905639.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:40.206Z,1528905640.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:40.240Z,1528905640.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:40.606Z,1528905640.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:40.628Z,1528905640.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:41.016Z,1528905641.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:41.034Z,1528905641.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:41.415Z,1528905641.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:41.433Z,1528905641.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:41.814Z,1528905641.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:41.857Z,1528905641.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:42.206Z,1528905642.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:42.258Z,1528905642.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:42.605Z,1528905642.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:42.651Z,1528905642.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:43.011Z,1528905643.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:43.051Z,1528905643.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:43.399Z,1528905643.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:43.440Z,1528905643.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:43.814Z,1528905643.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:43.836Z,1528905643.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:44.219Z,1528905644.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:44.260Z,1528905644.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:44.620Z,1528905644.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:44.638Z,1528905644.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:45.003Z,1528905645.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:45.044Z,1528905645.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:45.408Z,1528905645.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:45.431Z,1528905645.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:45.809Z,1528905645.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:45.830Z,1528905645.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:46.208Z,1528905646.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:46.240Z,1528905646.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:46.603Z,1528905646.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:46.643Z,1528905646.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:47.015Z,1528905647.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:47.038Z,1528905647.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:47.418Z,1528905647.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:47.436Z,1528905647.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:47.821Z,1528905647.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:47.839Z,1528905647.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:48.199Z,1528905648.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:48.244Z,1528905648.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:48.607Z,1528905648.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:48.628Z,1528905648.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:49.005Z,1528905649.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:49.042Z,1528905649.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:49.408Z,1528905649.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:49.428Z,1528905649.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:49.815Z,1528905649.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:49.867Z,1528905649.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:50.220Z,1528905650.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:50.243Z,1528905650.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:50.620Z,1528905650.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:50.640Z,1528905650.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:50.999Z,1528905650.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:51.032Z,1528905651.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:51.399Z,1528905651.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:51.448Z,1528905651.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:51.799Z,1528905651.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:51.840Z,1528905651.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:52.200Z,1528905652.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:52.246Z,1528905652.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:52.601Z,1528905652.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:52.645Z,1528905652.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:53.020Z,1528905653.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:53.056Z,1528905653.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:53.418Z,1528905653.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:53.453Z,1528905653.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:53.810Z,1528905653.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:53.861Z,1528905653.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:54.195Z,1528905654.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:54.240Z,1528905654.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:54.600Z,1528905654.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:54.619Z,1528905654.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:55.005Z,1528905655.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:55.023Z,1528905655.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:55.399Z,1528905655.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:55.417Z,1528905655.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:55.816Z,1528905655.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:55.851Z,1528905655.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:56.217Z,1528905656.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:56.253Z,1528905656.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:56.614Z,1528905656.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:56.649Z,1528905656.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:57.002Z,1528905657.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:57.026Z,1528905657.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:57.406Z,1528905657.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:57.430Z,1528905657.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:57.799Z,1528905657.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:57.830Z,1528905657.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:58.207Z,1528905658.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:58.224Z,1528905658.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:58.606Z,1528905658.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:58.623Z,1528905658.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:59.010Z,1528905659.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:59.033Z,1528905659.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:59.414Z,1528905659.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:59.436Z,1528905659.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:00:59.814Z,1528905659.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:00:59.831Z,1528905659.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:00.206Z,1528905660.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:00.223Z,1528905660.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:00.603Z,1528905660.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:00.640Z,1528905660.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:01.007Z,1528905661.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:01.024Z,1528905661.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:01.395Z,1528905661.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:01.438Z,1528905661.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:01.816Z,1528905661.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:01.837Z,1528905661.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:02.217Z,1528905662.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:02.240Z,1528905662.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:02.616Z,1528905662.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:02.634Z,1528905662.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:02.999Z,1528905662.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:03.035Z,1528905663.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:03.399Z,1528905663.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:03.428Z,1528905663.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:03.799Z,1528905663.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:03.838Z,1528905663.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:04.211Z,1528905664.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:04.229Z,1528905664.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:04.599Z,1528905664.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:04.627Z,1528905664.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:05.017Z,1528905665.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:05.035Z,1528905665.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:05.418Z,1528905665.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:05.455Z,1528905665.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:05.816Z,1528905665.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:05.833Z,1528905665.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:06.195Z,1528905666.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:06.224Z,1528905666.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:06.599Z,1528905666.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:06.631Z,1528905666.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:06.000Z,1528905667.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:07.036Z,1528905667.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:07.399Z,1528905667.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:07.432Z,1528905667.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:07.816Z,1528905667.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:07.834Z,1528905667.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:08.221Z,1528905668.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:08.246Z,1528905668.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:08.617Z,1528905668.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:08.637Z,1528905668.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:08.000Z,1528905669.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:09.036Z,1528905669.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:09.399Z,1528905669.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:09.436Z,1528905669.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:09.799Z,1528905669.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:09.836Z,1528905669.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:10.200Z,1528905670.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:10.230Z,1528905670.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:10.599Z,1528905670.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:10.629Z,1528905670.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:11.011Z,1528905671.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:11.047Z,1528905671.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:11.418Z,1528905671.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:11.441Z,1528905671.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:11.821Z,1528905671.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:11.840Z,1528905671.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:14.923Z,1528905674.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:14.941Z,1528905674.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:15.046Z,1528905675.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:15.079Z,1528905675.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:15.473Z,1528905675.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:15.495Z,1528905675.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:15.861Z,1528905675.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:15.904Z,1528905675.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:16.259Z,1528905676.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:16.289Z,1528905676.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:16.648Z,1528905676.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:16.695Z,1528905676.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:17.043Z,1528905677.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:17.092Z,1528905677.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:17.447Z,1528905677.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:17.464Z,1528905677.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:17.863Z,1528905677.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:17.894Z,1528905677.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:18.267Z,1528905678.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:18.295Z,1528905678.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:18.662Z,1528905678.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:18.696Z,1528905678.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:19.051Z,1528905679.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:19.070Z,1528905679.070 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:19.071Z,1528905679.071 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 251
2018-06-13T16:01:19.071Z,1528905679.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:01:19.105Z,1528905679.105 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:19.105Z,1528905679.105 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 251
2018-06-13T16:01:19.105Z,1528905679.105 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:01:19.113Z,1528905679.113 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:19.113Z,1528905679.113 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 251
2018-06-13T16:01:19.113Z,1528905679.113 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:01:19.193Z,1528905679.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:01:19.193Z,1528905679.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:01:19.193Z,1528905679.193 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:01:19.451Z,1528905679.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:19.569Z,1528905679.569 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:01:19.569Z,1528905679.569 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 251
2018-06-13T16:01:19.570Z,1528905679.570 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:01:19.570Z,1528905679.570 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 251
2018-06-13T16:01:19.570Z,1528905679.570 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:01:19.570Z,1528905679.570 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 251
2018-06-13T16:01:19.850Z,1528905679.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:19.871Z,1528905679.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:01:19.871Z,1528905679.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:01:19.871Z,1528905679.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:01:19.872Z,1528905679.872 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:01:19.872Z,1528905679.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:01:19.872Z,1528905679.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:01:19.873Z,1528905679.873 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:01:19.873Z,1528905679.873 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:01:19.874Z,1528905679.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:01:20.250Z,1528905680.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:20.277Z,1528905680.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:01:20.278Z,1528905680.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:20.652Z,1528905680.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:20.670Z,1528905680.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:01:20.671Z,1528905680.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:21.057Z,1528905681.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:21.079Z,1528905681.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:01:21.080Z,1528905681.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:21.464Z,1528905681.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:21.500Z,1528905681.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:01:21.501Z,1528905681.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:21.863Z,1528905681.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:21.905Z,1528905681.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:01:21.906Z,1528905681.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:22.253Z,1528905682.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:22.270Z,1528905682.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:01:22.271Z,1528905682.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:22.654Z,1528905682.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:22.677Z,1528905682.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:01:22.678Z,1528905682.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:23.054Z,1528905683.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:23.076Z,1528905683.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:01:23.077Z,1528905683.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:23.451Z,1528905683.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:23.503Z,1528905683.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:01:23.504Z,1528905683.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:23.864Z,1528905683.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:23.887Z,1528905683.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:01:23.888Z,1528905683.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:24.262Z,1528905684.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:24.284Z,1528905684.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:01:24.285Z,1528905684.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:24.667Z,1528905684.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:24.684Z,1528905684.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:01:24.685Z,1528905684.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:25.054Z,1528905685.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:25.081Z,1528905685.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:01:25.082Z,1528905685.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:25.454Z,1528905685.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:25.476Z,1528905685.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:01:25.477Z,1528905685.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:25.851Z,1528905685.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:25.880Z,1528905685.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:01:25.881Z,1528905685.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:26.255Z,1528905686.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:26.277Z,1528905686.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:01:26.278Z,1528905686.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:26.654Z,1528905686.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:26.672Z,1528905686.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:01:26.673Z,1528905686.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:27.062Z,1528905687.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:27.080Z,1528905687.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:01:27.081Z,1528905687.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:27.465Z,1528905687.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:27.488Z,1528905687.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:01:27.512Z,1528905687.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:27.863Z,1528905687.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:27.885Z,1528905687.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:01:27.886Z,1528905687.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:28.254Z,1528905688.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:28.288Z,1528905688.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:01:28.305Z,1528905688.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:28.655Z,1528905688.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:28.673Z,1528905688.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:01:28.674Z,1528905688.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:29.055Z,1528905689.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:29.085Z,1528905689.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:01:29.086Z,1528905689.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:29.451Z,1528905689.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:29.480Z,1528905689.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:01:29.480Z,1528905689.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:29.863Z,1528905689.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:29.880Z,1528905689.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:01:29.881Z,1528905689.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:30.263Z,1528905690.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:30.280Z,1528905690.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:01:30.281Z,1528905690.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:30.662Z,1528905690.662 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:30.685Z,1528905690.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:01:30.687Z,1528905690.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:31.054Z,1528905691.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:31.077Z,1528905691.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:01:31.078Z,1528905691.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:31.458Z,1528905691.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:31.476Z,1528905691.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:01:31.477Z,1528905691.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:31.851Z,1528905691.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:31.874Z,1528905691.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:01:31.875Z,1528905691.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:32.254Z,1528905692.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:32.277Z,1528905692.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:01:32.278Z,1528905692.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:32.653Z,1528905692.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:32.672Z,1528905692.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:01:32.674Z,1528905692.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:33.063Z,1528905693.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:33.080Z,1528905693.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:01:33.082Z,1528905693.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:33.468Z,1528905693.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:33.517Z,1528905693.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:01:33.518Z,1528905693.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:33.863Z,1528905693.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:33.880Z,1528905693.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:01:33.882Z,1528905693.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:34.253Z,1528905694.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:34.271Z,1528905694.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:01:34.272Z,1528905694.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:34.654Z,1528905694.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:34.677Z,1528905694.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:01:34.678Z,1528905694.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:35.054Z,1528905695.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:35.076Z,1528905695.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:01:35.077Z,1528905695.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:35.450Z,1528905695.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:35.475Z,1528905695.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:01:35.475Z,1528905695.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:35.869Z,1528905695.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:35.891Z,1528905695.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:01:35.892Z,1528905695.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:36.267Z,1528905696.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:36.284Z,1528905696.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:01:36.286Z,1528905696.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:36.663Z,1528905696.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:36.680Z,1528905696.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:01:36.681Z,1528905696.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:37.060Z,1528905697.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:37.077Z,1528905697.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:01:37.078Z,1528905697.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:37.443Z,1528905697.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:37.489Z,1528905697.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:01:37.490Z,1528905697.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:37.843Z,1528905697.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:37.879Z,1528905697.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:01:37.880Z,1528905697.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:38.249Z,1528905698.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:38.278Z,1528905698.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:01:38.279Z,1528905698.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:38.643Z,1528905698.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:38.679Z,1528905698.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T16:01:38.680Z,1528905698.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:39.065Z,1528905699.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:39.086Z,1528905699.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:39.469Z,1528905699.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:39.486Z,1528905699.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:39.860Z,1528905699.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:39.878Z,1528905699.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:40.247Z,1528905700.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:40.276Z,1528905700.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:40.647Z,1528905700.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:40.691Z,1528905700.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:41.048Z,1528905701.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:41.076Z,1528905701.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:41.447Z,1528905701.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:41.477Z,1528905701.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:41.868Z,1528905701.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:41.892Z,1528905701.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:42.267Z,1528905702.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:42.290Z,1528905702.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:42.663Z,1528905702.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:42.682Z,1528905702.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:43.048Z,1528905703.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:43.084Z,1528905703.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:43.443Z,1528905703.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:43.476Z,1528905703.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:43.847Z,1528905703.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:43.876Z,1528905703.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:44.248Z,1528905704.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:44.288Z,1528905704.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:44.643Z,1528905704.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:44.660Z,1528905704.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:45.058Z,1528905705.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:45.097Z,1528905705.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:45.461Z,1528905705.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:45.491Z,1528905705.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:45.857Z,1528905705.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:45.891Z,1528905705.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:46.247Z,1528905706.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:46.264Z,1528905706.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:46.651Z,1528905706.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:46.669Z,1528905706.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:47.051Z,1528905707.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:47.069Z,1528905707.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:47.450Z,1528905707.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:47.468Z,1528905707.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:47.865Z,1528905707.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:47.900Z,1528905707.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:48.261Z,1528905708.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:48.299Z,1528905708.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:48.661Z,1528905708.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:48.679Z,1528905708.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:49.053Z,1528905709.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:49.071Z,1528905709.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:49.452Z,1528905709.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:49.470Z,1528905709.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:49.853Z,1528905709.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:49.871Z,1528905709.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:50.255Z,1528905710.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:50.273Z,1528905710.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:50.654Z,1528905710.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:50.671Z,1528905710.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:51.058Z,1528905711.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:51.080Z,1528905711.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:51.461Z,1528905711.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:51.479Z,1528905711.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:51.858Z,1528905711.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:51.884Z,1528905711.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:52.251Z,1528905712.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:52.285Z,1528905712.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:52.654Z,1528905712.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:52.686Z,1528905712.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:53.054Z,1528905713.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:53.072Z,1528905713.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:53.451Z,1528905713.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:53.474Z,1528905713.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:53.863Z,1528905713.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:53.882Z,1528905713.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:54.262Z,1528905714.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:54.284Z,1528905714.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:54.663Z,1528905714.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:54.680Z,1528905714.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:55.054Z,1528905715.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:55.077Z,1528905715.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:55.443Z,1528905715.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:55.479Z,1528905715.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:55.853Z,1528905715.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:55.871Z,1528905715.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:56.244Z,1528905716.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:56.284Z,1528905716.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:56.643Z,1528905716.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:56.677Z,1528905716.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:57.057Z,1528905717.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:57.084Z,1528905717.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:57.469Z,1528905717.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:57.487Z,1528905717.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:57.857Z,1528905717.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:57.884Z,1528905717.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:58.247Z,1528905718.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:58.280Z,1528905718.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:58.647Z,1528905718.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:58.681Z,1528905718.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:59.044Z,1528905719.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:59.061Z,1528905719.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:59.447Z,1528905719.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:59.464Z,1528905719.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:01:59.861Z,1528905719.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:01:59.886Z,1528905719.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:00.265Z,1528905720.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:00.291Z,1528905720.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:00.661Z,1528905720.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:00.687Z,1528905720.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:01.051Z,1528905721.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:01.092Z,1528905721.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:01.451Z,1528905721.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:01.469Z,1528905721.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:01.850Z,1528905721.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:01.872Z,1528905721.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:02.252Z,1528905722.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:02.276Z,1528905722.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:02.649Z,1528905722.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:02.667Z,1528905722.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:03.061Z,1528905723.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:03.079Z,1528905723.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:03.462Z,1528905723.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:03.480Z,1528905723.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:03.858Z,1528905723.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:03.875Z,1528905723.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:04.253Z,1528905724.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:04.271Z,1528905724.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:04.654Z,1528905724.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:04.672Z,1528905724.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:05.048Z,1528905725.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:05.073Z,1528905725.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:05.452Z,1528905725.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:05.476Z,1528905725.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:05.862Z,1528905725.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:05.880Z,1528905725.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:06.262Z,1528905726.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:06.279Z,1528905726.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:06.663Z,1528905726.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:06.681Z,1528905726.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:07.046Z,1528905727.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:07.076Z,1528905727.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:07.447Z,1528905727.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:07.475Z,1528905727.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:07.847Z,1528905727.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:07.883Z,1528905727.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:08.248Z,1528905728.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:08.279Z,1528905728.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:08.647Z,1528905728.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:08.674Z,1528905728.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:09.064Z,1528905729.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:09.088Z,1528905729.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:09.467Z,1528905729.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:09.485Z,1528905729.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:09.859Z,1528905729.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:09.878Z,1528905729.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:10.247Z,1528905730.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:10.282Z,1528905730.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:10.647Z,1528905730.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:10.682Z,1528905730.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:11.048Z,1528905731.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:11.079Z,1528905731.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:11.447Z,1528905731.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:11.480Z,1528905731.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:11.872Z,1528905731.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:11.890Z,1528905731.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:14.974Z,1528905734.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:14.992Z,1528905734.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:15.117Z,1528905735.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:15.173Z,1528905735.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:15.503Z,1528905735.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:15.532Z,1528905735.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:15.904Z,1528905735.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:15.931Z,1528905735.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:16.300Z,1528905736.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:16.336Z,1528905736.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:16.699Z,1528905736.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:16.737Z,1528905736.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:17.116Z,1528905737.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:17.134Z,1528905737.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:17.519Z,1528905737.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:17.536Z,1528905737.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:17.920Z,1528905737.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:17.938Z,1528905737.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:18.299Z,1528905738.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:18.331Z,1528905738.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:18.699Z,1528905738.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:18.736Z,1528905738.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:19.100Z,1528905739.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:19.132Z,1528905739.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:19.495Z,1528905739.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:19.532Z,1528905739.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:19.909Z,1528905739.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:19.944Z,1528905739.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:20.321Z,1528905740.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:20.339Z,1528905740.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:20.706Z,1528905740.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:20.742Z,1528905740.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:21.099Z,1528905741.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:21.142Z,1528905741.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:21.503Z,1528905741.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:21.537Z,1528905741.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:21.899Z,1528905741.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:21.937Z,1528905741.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:22.300Z,1528905742.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:22.334Z,1528905742.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:22.700Z,1528905742.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:22.718Z,1528905742.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:23.113Z,1528905743.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:23.150Z,1528905743.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:23.517Z,1528905743.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:23.545Z,1528905743.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:23.914Z,1528905743.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:23.962Z,1528905743.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:24.298Z,1528905744.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:24.316Z,1528905744.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:24.702Z,1528905744.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:24.721Z,1528905744.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:25.103Z,1528905745.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:25.128Z,1528905745.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:25.502Z,1528905745.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:25.520Z,1528905745.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:25.910Z,1528905745.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:25.929Z,1528905745.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:26.313Z,1528905746.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:26.332Z,1528905746.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:26.714Z,1528905746.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:26.735Z,1528905746.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:27.103Z,1528905747.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:27.126Z,1528905747.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:27.506Z,1528905747.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:27.524Z,1528905747.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:27.905Z,1528905747.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:27.923Z,1528905747.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:28.304Z,1528905748.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:28.330Z,1528905748.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:28.704Z,1528905748.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:28.731Z,1528905748.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:29.111Z,1528905749.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:29.129Z,1528905749.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:29.517Z,1528905749.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:29.535Z,1528905749.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:29.918Z,1528905749.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:29.936Z,1528905749.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:30.299Z,1528905750.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:30.326Z,1528905750.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:30.699Z,1528905750.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:30.736Z,1528905750.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:31.100Z,1528905751.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:31.130Z,1528905751.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:31.504Z,1528905751.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:31.531Z,1528905751.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:31.915Z,1528905751.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:31.933Z,1528905751.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:32.320Z,1528905752.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:32.338Z,1528905752.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:32.715Z,1528905752.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:32.734Z,1528905752.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:33.099Z,1528905753.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:33.131Z,1528905753.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:33.500Z,1528905753.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:33.535Z,1528905753.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:33.899Z,1528905753.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:33.937Z,1528905753.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:34.300Z,1528905754.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:34.334Z,1528905754.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:34.699Z,1528905754.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:34.718Z,1528905754.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:35.113Z,1528905755.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:35.147Z,1528905755.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:35.517Z,1528905755.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:35.544Z,1528905755.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:35.913Z,1528905755.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:35.947Z,1528905755.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:36.303Z,1528905756.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:36.321Z,1528905756.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:36.702Z,1528905756.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:36.720Z,1528905756.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:37.103Z,1528905757.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:37.121Z,1528905757.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:37.498Z,1528905757.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:37.517Z,1528905757.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:37.913Z,1528905757.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:37.949Z,1528905757.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:38.317Z,1528905758.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:38.355Z,1528905758.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:38.713Z,1528905758.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:38.751Z,1528905758.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:39.102Z,1528905759.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:39.120Z,1528905759.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:39.502Z,1528905759.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:39.520Z,1528905759.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:39.903Z,1528905759.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:39.928Z,1528905759.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:40.306Z,1528905760.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:40.323Z,1528905760.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:40.705Z,1528905760.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:40.723Z,1528905760.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:41.106Z,1528905761.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:41.124Z,1528905761.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:41.509Z,1528905761.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:41.527Z,1528905761.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:41.914Z,1528905761.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:41.931Z,1528905761.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:42.304Z,1528905762.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:42.328Z,1528905762.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:42.704Z,1528905762.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:42.728Z,1528905762.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:43.104Z,1528905763.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:43.138Z,1528905763.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:43.499Z,1528905763.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:43.522Z,1528905763.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:43.910Z,1528905763.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:43.932Z,1528905763.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:44.313Z,1528905764.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:44.332Z,1528905764.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:44.710Z,1528905764.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:44.728Z,1528905764.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:45.107Z,1528905765.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:45.124Z,1528905765.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:45.506Z,1528905765.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:45.524Z,1528905765.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:45.902Z,1528905765.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:45.920Z,1528905765.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:46.306Z,1528905766.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:46.324Z,1528905766.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:46.703Z,1528905766.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:46.736Z,1528905766.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:47.111Z,1528905767.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:47.129Z,1528905767.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:47.514Z,1528905767.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:47.531Z,1528905767.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:47.913Z,1528905767.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:47.936Z,1528905767.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:48.309Z,1528905768.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:48.332Z,1528905768.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:48.703Z,1528905768.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:48.735Z,1528905768.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:49.104Z,1528905769.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:49.128Z,1528905769.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:49.506Z,1528905769.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:49.528Z,1528905769.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:49.916Z,1528905769.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:49.934Z,1528905769.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:50.315Z,1528905770.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:50.340Z,1528905770.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:50.715Z,1528905770.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:50.733Z,1528905770.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:51.103Z,1528905771.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:51.127Z,1528905771.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:51.503Z,1528905771.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:51.529Z,1528905771.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:51.914Z,1528905771.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:51.940Z,1528905771.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:52.318Z,1528905772.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:52.340Z,1528905772.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:52.719Z,1528905772.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:52.738Z,1528905772.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:53.096Z,1528905773.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:53.127Z,1528905773.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:53.505Z,1528905773.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:53.522Z,1528905773.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:53.919Z,1528905773.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:53.944Z,1528905773.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:54.318Z,1528905774.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:54.340Z,1528905774.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:54.716Z,1528905774.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:54.733Z,1528905774.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:55.103Z,1528905775.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:55.128Z,1528905775.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:55.495Z,1528905775.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:55.531Z,1528905775.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:55.914Z,1528905775.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:55.933Z,1528905775.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:56.319Z,1528905776.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:56.337Z,1528905776.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:56.718Z,1528905776.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:56.736Z,1528905776.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:57.103Z,1528905777.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:57.137Z,1528905777.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:57.499Z,1528905777.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:57.539Z,1528905777.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:57.911Z,1528905777.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:57.929Z,1528905777.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:58.319Z,1528905778.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:58.336Z,1528905778.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:58.721Z,1528905778.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:58.739Z,1528905778.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:59.096Z,1528905779.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:59.131Z,1528905779.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:59.499Z,1528905779.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:59.535Z,1528905779.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:02:59.923Z,1528905779.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:02:59.941Z,1528905779.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:00.316Z,1528905780.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:00.333Z,1528905780.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:00.710Z,1528905780.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:00.735Z,1528905780.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:01.101Z,1528905781.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:01.130Z,1528905781.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:01.497Z,1528905781.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:01.532Z,1528905781.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:01.914Z,1528905781.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:01.947Z,1528905781.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:02.316Z,1528905782.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:02.346Z,1528905782.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:02.706Z,1528905782.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:02.744Z,1528905782.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:03.100Z,1528905783.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:03.130Z,1528905783.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:03.495Z,1528905783.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:03.514Z,1528905783.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:03.905Z,1528905783.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:03.936Z,1528905783.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:04.317Z,1528905784.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:04.352Z,1528905784.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:04.717Z,1528905784.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:04.747Z,1528905784.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:05.104Z,1528905785.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:05.148Z,1528905785.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:05.502Z,1528905785.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:05.520Z,1528905785.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:05.913Z,1528905785.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:05.951Z,1528905785.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:06.313Z,1528905786.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:06.331Z,1528905786.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:06.706Z,1528905786.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:06.728Z,1528905786.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:07.105Z,1528905787.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:07.123Z,1528905787.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:07.499Z,1528905787.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:07.522Z,1528905787.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:07.910Z,1528905787.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:07.927Z,1528905787.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:08.310Z,1528905788.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:08.332Z,1528905788.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:08.710Z,1528905788.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:08.727Z,1528905788.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:09.103Z,1528905789.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:09.124Z,1528905789.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:09.504Z,1528905789.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:09.522Z,1528905789.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:09.906Z,1528905789.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:09.928Z,1528905789.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:10.314Z,1528905790.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:10.332Z,1528905790.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:10.709Z,1528905790.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:10.727Z,1528905790.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:11.102Z,1528905791.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:11.120Z,1528905791.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:11.506Z,1528905791.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:11.524Z,1528905791.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:11.913Z,1528905791.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:11.936Z,1528905791.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:12.317Z,1528905792.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:12.336Z,1528905792.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:12.714Z,1528905792.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:12.731Z,1528905792.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:13.110Z,1528905793.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:13.127Z,1528905793.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:13.503Z,1528905793.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:13.525Z,1528905793.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:13.914Z,1528905793.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:13.931Z,1528905793.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:14.313Z,1528905794.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:14.336Z,1528905794.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:14.710Z,1528905794.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:14.732Z,1528905794.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:15.106Z,1528905795.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:15.128Z,1528905795.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:15.506Z,1528905795.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:15.528Z,1528905795.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:18.630Z,1528905798.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:18.657Z,1528905798.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:18.785Z,1528905798.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:18.832Z,1528905798.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:19.196Z,1528905799.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:19.214Z,1528905799.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:19.572Z,1528905799.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:19.602Z,1528905799.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:19.971Z,1528905799.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:20.016Z,1528905800.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:20.376Z,1528905800.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:20.394Z,1528905800.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:20.771Z,1528905800.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:20.788Z,1528905800.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:21.185Z,1528905801.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:21.219Z,1528905801.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:21.585Z,1528905801.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:21.623Z,1528905801.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:21.985Z,1528905801.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:22.023Z,1528905802.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:22.374Z,1528905802.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:22.392Z,1528905802.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:22.773Z,1528905802.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:22.791Z,1528905802.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:23.175Z,1528905803.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:23.193Z,1528905803.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:23.575Z,1528905803.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:23.593Z,1528905803.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:23.985Z,1528905803.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:24.003Z,1528905804.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:24.381Z,1528905804.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:24.399Z,1528905804.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:24.781Z,1528905804.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:24.799Z,1528905804.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:25.176Z,1528905805.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:25.194Z,1528905805.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:25.575Z,1528905805.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:25.600Z,1528905805.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:25.976Z,1528905805.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:25.994Z,1528905805.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:26.377Z,1528905806.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:26.394Z,1528905806.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:26.776Z,1528905806.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:26.800Z,1528905806.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:27.181Z,1528905807.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:27.199Z,1528905807.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:27.585Z,1528905807.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:27.603Z,1528905807.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:27.982Z,1528905807.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:27.000Z,1528905808.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:28.375Z,1528905808.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:28.392Z,1528905808.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:28.777Z,1528905808.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:28.795Z,1528905808.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:29.176Z,1528905809.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:29.194Z,1528905809.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:29.576Z,1528905809.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:29.593Z,1528905809.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:29.986Z,1528905809.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:30.004Z,1528905810.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:30.385Z,1528905810.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:30.403Z,1528905810.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:30.783Z,1528905810.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:30.814Z,1528905810.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:31.177Z,1528905811.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:31.195Z,1528905811.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:31.577Z,1528905811.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:31.595Z,1528905811.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:31.975Z,1528905811.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:32.005Z,1528905812.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:32.377Z,1528905812.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:32.404Z,1528905812.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:32.779Z,1528905812.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:32.797Z,1528905812.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:33.187Z,1528905813.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:33.205Z,1528905813.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:33.587Z,1528905813.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:33.612Z,1528905813.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:33.987Z,1528905813.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:34.012Z,1528905814.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:34.381Z,1528905814.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:34.399Z,1528905814.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:34.775Z,1528905814.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:34.810Z,1528905814.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:35.178Z,1528905815.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:35.195Z,1528905815.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:35.575Z,1528905815.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:35.599Z,1528905815.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:35.987Z,1528905815.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:36.004Z,1528905816.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:36.385Z,1528905816.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:36.403Z,1528905816.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:36.787Z,1528905816.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:36.805Z,1528905816.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:37.178Z,1528905817.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:37.196Z,1528905817.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:37.577Z,1528905817.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:37.603Z,1528905817.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:37.954Z,1528905817.954 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T16:03:37.955Z,1528905817.955 [NAL9602] Data Fault, FailCount= 4
2018-06-13T16:03:37.955Z,1528905817.955 [NAL9602](ERROR): Data Fault
2018-06-13T16:03:37.975Z,1528905817.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:38.013Z,1528905818.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:38.106Z,1528905818.106 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T16:03:38.350Z,1528905818.350 [NAL9602](INFO): Powering down
2018-06-13T16:03:38.368Z,1528905818.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:38.410Z,1528905818.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:38.771Z,1528905818.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:38.799Z,1528905818.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:39.170Z,1528905819.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:39.208Z,1528905819.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:39.281Z,1528905819.281 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T16:03:39.281Z,1528905819.281 [NAL9602] No Fault, FailCount= 4
2018-06-13T16:03:39.566Z,1528905819.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:39.604Z,1528905819.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:39.970Z,1528905819.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:40.004Z,1528905820.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:40.369Z,1528905820.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:40.403Z,1528905820.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:40.766Z,1528905820.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:40.800Z,1528905820.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:41.171Z,1528905821.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:41.204Z,1528905821.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:41.570Z,1528905821.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:41.608Z,1528905821.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:41.966Z,1528905821.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:41.994Z,1528905821.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:42.370Z,1528905822.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:42.404Z,1528905822.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:42.770Z,1528905822.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:42.808Z,1528905822.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:43.166Z,1528905823.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:43.194Z,1528905823.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:43.571Z,1528905823.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:43.605Z,1528905823.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:43.970Z,1528905823.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:44.007Z,1528905824.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:44.367Z,1528905824.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:44.395Z,1528905824.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:44.771Z,1528905824.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:44.812Z,1528905824.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:45.170Z,1528905825.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:45.196Z,1528905825.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:45.567Z,1528905825.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:45.601Z,1528905825.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:45.967Z,1528905825.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:45.993Z,1528905825.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:46.371Z,1528905826.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:46.398Z,1528905826.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:46.771Z,1528905826.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:46.788Z,1528905826.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:47.170Z,1528905827.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:47.187Z,1528905827.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:47.571Z,1528905827.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:47.611Z,1528905827.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:47.975Z,1528905827.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:47.000Z,1528905828.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:48.369Z,1528905828.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:48.388Z,1528905828.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:48.774Z,1528905828.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:48.792Z,1528905828.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:49.169Z,1528905829.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:49.187Z,1528905829.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:49.569Z,1528905829.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:49.587Z,1528905829.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:49.974Z,1528905829.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:49.992Z,1528905829.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:50.373Z,1528905830.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:50.390Z,1528905830.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:50.771Z,1528905830.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:50.789Z,1528905830.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:51.174Z,1528905831.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:51.192Z,1528905831.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:51.571Z,1528905831.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:51.596Z,1528905831.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:51.972Z,1528905831.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:51.990Z,1528905831.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:52.374Z,1528905832.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:52.391Z,1528905832.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:52.771Z,1528905832.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:52.789Z,1528905832.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:53.171Z,1528905833.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:53.190Z,1528905833.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:53.574Z,1528905833.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:53.591Z,1528905833.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:53.974Z,1528905833.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:53.991Z,1528905833.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:54.372Z,1528905834.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:54.390Z,1528905834.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:54.773Z,1528905834.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:54.791Z,1528905834.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:55.172Z,1528905835.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:55.189Z,1528905835.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:55.571Z,1528905835.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:55.589Z,1528905835.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:55.974Z,1528905835.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:55.996Z,1528905835.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:56.373Z,1528905836.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:56.390Z,1528905836.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:56.772Z,1528905836.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:56.790Z,1528905836.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:57.174Z,1528905837.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:57.191Z,1528905837.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:57.573Z,1528905837.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:57.591Z,1528905837.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:57.971Z,1528905837.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:57.990Z,1528905837.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:58.370Z,1528905838.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:58.392Z,1528905838.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:58.775Z,1528905838.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:58.793Z,1528905838.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:59.172Z,1528905839.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:59.190Z,1528905839.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:59.576Z,1528905839.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:59.594Z,1528905839.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:03:59.972Z,1528905839.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:03:59.996Z,1528905839.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:00.372Z,1528905840.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:00.390Z,1528905840.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:00.778Z,1528905840.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:00.796Z,1528905840.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:01.175Z,1528905841.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:01.193Z,1528905841.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:01.572Z,1528905841.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:01.590Z,1528905841.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:01.976Z,1528905841.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:01.994Z,1528905841.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:02.375Z,1528905842.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:02.393Z,1528905842.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:02.772Z,1528905842.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:02.790Z,1528905842.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:03.176Z,1528905843.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:03.194Z,1528905843.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:03.572Z,1528905843.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:03.596Z,1528905843.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:03.972Z,1528905843.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:03.990Z,1528905843.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:04.376Z,1528905844.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:04.394Z,1528905844.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:04.775Z,1528905844.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:04.793Z,1528905844.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:05.172Z,1528905845.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:05.190Z,1528905845.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:05.571Z,1528905845.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:05.605Z,1528905845.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:05.976Z,1528905845.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:05.000Z,1528905846.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:06.376Z,1528905846.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:06.394Z,1528905846.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:06.770Z,1528905846.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:06.799Z,1528905846.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:07.172Z,1528905847.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:07.190Z,1528905847.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:07.573Z,1528905847.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:07.595Z,1528905847.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:07.974Z,1528905847.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:08.005Z,1528905848.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:08.354Z,1528905848.354 [NAL9602](INFO): Powering up NAL9602
2018-06-13T16:04:08.375Z,1528905848.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:08.412Z,1528905848.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:08.773Z,1528905848.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:08.791Z,1528905848.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:09.176Z,1528905849.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:09.194Z,1528905849.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:09.576Z,1528905849.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:09.594Z,1528905849.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:09.976Z,1528905849.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:09.994Z,1528905849.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:10.381Z,1528905850.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:10.399Z,1528905850.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:10.776Z,1528905850.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:10.800Z,1528905850.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:11.173Z,1528905851.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:11.191Z,1528905851.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:11.581Z,1528905851.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:11.612Z,1528905851.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:11.981Z,1528905851.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:11.998Z,1528905851.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:15.086Z,1528905855.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:15.104Z,1528905855.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:15.107Z,1528905855.107 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T15:59:14.8Z
2018-06-13T16:04:15.108Z,1528905855.108 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T16:04:15.108Z,1528905855.108 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T16:04:15.214Z,1528905855.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:15.264Z,1528905855.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:16.368Z,1528905856.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:16.394Z,1528905856.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:16.503Z,1528905856.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:16.548Z,1528905856.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:16.902Z,1528905856.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:16.940Z,1528905856.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:17.302Z,1528905857.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:17.324Z,1528905857.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:17.706Z,1528905857.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:17.741Z,1528905857.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:18.106Z,1528905858.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:18.124Z,1528905858.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:18.505Z,1528905858.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:18.523Z,1528905858.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:18.917Z,1528905858.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:18.952Z,1528905858.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:19.293Z,1528905859.293 [NAL9602](INFO): NAL9602 initialized
2018-06-13T16:04:19.310Z,1528905859.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:19.329Z,1528905859.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:19.710Z,1528905859.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:19.727Z,1528905859.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:20.120Z,1528905860.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:20.138Z,1528905860.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:20.138Z,1528905860.138 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 252
2018-06-13T16:04:20.138Z,1528905860.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:04:20.140Z,1528905860.140 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:20.140Z,1528905860.140 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 252
2018-06-13T16:04:20.140Z,1528905860.140 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:04:20.142Z,1528905860.142 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:20.142Z,1528905860.142 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 252
2018-06-13T16:04:20.142Z,1528905860.142 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:04:20.237Z,1528905860.237 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:04:20.237Z,1528905860.237 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:04:20.238Z,1528905860.238 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:04:20.523Z,1528905860.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:20.629Z,1528905860.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:04:20.629Z,1528905860.629 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 252
2018-06-13T16:04:20.630Z,1528905860.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:04:20.630Z,1528905860.630 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 252
2018-06-13T16:04:20.630Z,1528905860.630 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:04:20.630Z,1528905860.630 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 252
2018-06-13T16:04:20.923Z,1528905860.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:20.951Z,1528905860.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:04:20.951Z,1528905860.951 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:04:20.951Z,1528905860.951 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:04:20.952Z,1528905860.952 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:04:20.952Z,1528905860.952 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:04:20.952Z,1528905860.952 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:04:20.990Z,1528905860.990 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:04:20.990Z,1528905860.990 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:04:20.991Z,1528905860.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:04:24.025Z,1528905864.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:24.043Z,1528905864.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2018-06-13T16:04:24.044Z,1528905864.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:24.133Z,1528905864.133 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0292.lzma
2018-06-13T16:04:24.176Z,1528905864.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:24.193Z,1528905864.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T16:04:24.194Z,1528905864.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:24.577Z,1528905864.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:24.595Z,1528905864.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T16:04:24.596Z,1528905864.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:24.934Z,1528905864.934 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0292.lzma.bak
2018-06-13T16:04:24.934Z,1528905864.934 [DataOverHttps](INFO): SBD MOMSN=8329504
2018-06-13T16:04:24.993Z,1528905864.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:25.027Z,1528905865.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T16:04:25.028Z,1528905865.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:26.890Z,1528905866.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:26.928Z,1528905866.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:04:26.929Z,1528905866.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:27.047Z,1528905867.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:27.084Z,1528905867.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T16:04:27.086Z,1528905867.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:30.194Z,1528905870.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:30.233Z,1528905870.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T16:04:30.234Z,1528905870.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:30.338Z,1528905870.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:30.383Z,1528905870.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T16:04:30.384Z,1528905870.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:30.753Z,1528905870.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:30.788Z,1528905870.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T16:04:30.789Z,1528905870.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:31.153Z,1528905871.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:31.182Z,1528905871.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T16:04:31.183Z,1528905871.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:31.554Z,1528905871.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:31.588Z,1528905871.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T16:04:31.589Z,1528905871.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:31.939Z,1528905871.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:31.956Z,1528905871.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-06-13T16:04:31.974Z,1528905871.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:35.054Z,1528905875.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:35.081Z,1528905875.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T16:04:35.082Z,1528905875.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:35.177Z,1528905875.177 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180613T032335/Express0293.lzma
2018-06-13T16:04:35.198Z,1528905875.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:35.234Z,1528905875.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-06-13T16:04:35.235Z,1528905875.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:35.609Z,1528905875.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:35.644Z,1528905875.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T16:04:35.645Z,1528905875.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:35.978Z,1528905875.978 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0293.lzma.bak
2018-06-13T16:04:35.978Z,1528905875.978 [DataOverHttps](INFO): SBD MOMSN=8329506
2018-06-13T16:04:36.034Z,1528905876.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:36.052Z,1528905876.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T16:04:36.052Z,1528905876.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:37.934Z,1528905877.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:37.951Z,1528905877.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T16:04:37.952Z,1528905877.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:37.955Z,1528905877.955 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T16:04:37.955Z,1528905877.955 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T16:04:37.955Z,1528905877.955 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T16:04:38.084Z,1528905878.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:38.128Z,1528905878.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:04:38.130Z,1528905878.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:38.482Z,1528905878.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:38.500Z,1528905878.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:04:38.500Z,1528905878.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:38.879Z,1528905878.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:38.902Z,1528905878.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:04:38.903Z,1528905878.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:39.281Z,1528905879.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:39.299Z,1528905879.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:04:39.300Z,1528905879.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:42.432Z,1528905882.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:42.449Z,1528905882.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:42.565Z,1528905882.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:42.603Z,1528905882.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:42.978Z,1528905882.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:43.002Z,1528905883.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:43.378Z,1528905883.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:43.404Z,1528905883.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:43.756Z,1528905883.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:43.792Z,1528905883.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:44.154Z,1528905884.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:44.198Z,1528905884.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:44.556Z,1528905884.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:44.603Z,1528905884.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:44.955Z,1528905884.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:44.999Z,1528905884.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:45.365Z,1528905885.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:45.404Z,1528905885.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:45.769Z,1528905885.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:45.813Z,1528905885.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:46.170Z,1528905886.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:46.211Z,1528905886.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:46.558Z,1528905886.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:46.582Z,1528905886.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:46.958Z,1528905886.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:46.984Z,1528905886.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:47.356Z,1528905887.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:47.374Z,1528905887.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:47.760Z,1528905887.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:47.778Z,1528905887.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:48.170Z,1528905888.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:48.211Z,1528905888.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:48.569Z,1528905888.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:48.618Z,1528905888.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:48.965Z,1528905888.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:48.983Z,1528905888.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:49.362Z,1528905889.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:49.379Z,1528905889.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:49.755Z,1528905889.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:49.782Z,1528905889.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:50.159Z,1528905890.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:50.190Z,1528905890.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:50.562Z,1528905890.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:50.580Z,1528905890.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:50.962Z,1528905890.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:50.980Z,1528905890.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:51.370Z,1528905891.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:51.392Z,1528905891.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:51.771Z,1528905891.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:51.789Z,1528905891.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:52.170Z,1528905892.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:52.187Z,1528905892.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:52.559Z,1528905892.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:52.582Z,1528905892.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:52.962Z,1528905892.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:52.983Z,1528905892.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:53.351Z,1528905893.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:53.390Z,1528905893.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:53.755Z,1528905893.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:53.782Z,1528905893.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:54.176Z,1528905894.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:54.200Z,1528905894.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:54.575Z,1528905894.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:54.599Z,1528905894.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:54.971Z,1528905894.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:54.990Z,1528905894.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:55.355Z,1528905895.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:55.390Z,1528905895.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:55.755Z,1528905895.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:55.790Z,1528905895.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:56.151Z,1528905896.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:56.196Z,1528905896.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:56.556Z,1528905896.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:56.590Z,1528905896.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:56.955Z,1528905896.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:56.972Z,1528905896.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:57.365Z,1528905897.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:57.412Z,1528905897.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:57.770Z,1528905897.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:57.805Z,1528905897.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:58.165Z,1528905898.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:58.200Z,1528905898.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:58.555Z,1528905898.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:58.572Z,1528905898.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:58.959Z,1528905898.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:58.977Z,1528905898.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:59.358Z,1528905899.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:59.376Z,1528905899.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:04:59.758Z,1528905899.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:04:59.775Z,1528905899.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:00.169Z,1528905900.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:00.187Z,1528905900.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:00.569Z,1528905900.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:00.587Z,1528905900.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:00.966Z,1528905900.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:00.988Z,1528905900.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:01.362Z,1528905901.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:01.379Z,1528905901.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:01.755Z,1528905901.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:01.778Z,1528905901.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:02.159Z,1528905902.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:02.181Z,1528905902.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:02.564Z,1528905902.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:02.588Z,1528905902.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:02.955Z,1528905902.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:02.978Z,1528905902.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:03.370Z,1528905903.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:03.388Z,1528905903.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:03.771Z,1528905903.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:03.796Z,1528905903.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:04.170Z,1528905904.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:04.187Z,1528905904.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:04.559Z,1528905904.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:04.583Z,1528905904.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:04.962Z,1528905904.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:04.979Z,1528905904.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:05.362Z,1528905905.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:05.380Z,1528905905.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:05.759Z,1528905905.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:05.793Z,1528905905.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:06.176Z,1528905906.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:06.194Z,1528905906.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:06.571Z,1528905906.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:06.589Z,1528905906.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:06.966Z,1528905906.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:06.988Z,1528905906.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:07.356Z,1528905907.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:07.391Z,1528905907.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:07.755Z,1528905907.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:07.787Z,1528905907.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:08.155Z,1528905908.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:08.187Z,1528905908.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:08.556Z,1528905908.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:08.588Z,1528905908.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:08.951Z,1528905908.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:08.984Z,1528905908.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:09.366Z,1528905909.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:09.400Z,1528905909.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:09.769Z,1528905909.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:09.813Z,1528905909.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:10.169Z,1528905910.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:10.202Z,1528905910.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:10.558Z,1528905910.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:10.576Z,1528905910.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:10.957Z,1528905910.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:10.983Z,1528905910.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:11.359Z,1528905911.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:11.376Z,1528905911.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:11.760Z,1528905911.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:11.778Z,1528905911.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:12.177Z,1528905912.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:12.230Z,1528905912.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:12.569Z,1528905912.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:12.587Z,1528905912.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:12.966Z,1528905912.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:12.983Z,1528905912.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:13.362Z,1528905913.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:13.380Z,1528905913.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:13.755Z,1528905913.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:13.786Z,1528905913.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:14.162Z,1528905914.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:14.180Z,1528905914.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:14.562Z,1528905914.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:14.580Z,1528905914.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:14.961Z,1528905914.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:14.984Z,1528905914.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:15.366Z,1528905915.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:15.388Z,1528905915.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:15.769Z,1528905915.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:15.792Z,1528905915.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:16.166Z,1528905916.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:16.185Z,1528905916.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:16.559Z,1528905916.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:16.582Z,1528905916.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:16.960Z,1528905916.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:16.991Z,1528905916.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:17.362Z,1528905917.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:17.380Z,1528905917.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:17.759Z,1528905917.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:17.783Z,1528905917.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:18.171Z,1528905918.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:18.189Z,1528905918.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:18.571Z,1528905918.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:18.588Z,1528905918.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:18.974Z,1528905918.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:18.991Z,1528905918.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:19.362Z,1528905919.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:19.384Z,1528905919.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:19.751Z,1528905919.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:19.788Z,1528905919.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:20.159Z,1528905920.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:20.183Z,1528905920.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:20.552Z,1528905920.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:20.583Z,1528905920.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:20.951Z,1528905920.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:20.988Z,1528905920.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:21.372Z,1528905921.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:21.390Z,1528905921.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:21.775Z,1528905921.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:21.838Z,1528905921.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:22.169Z,1528905922.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:22.271Z,1528905922.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:22.562Z,1528905922.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:22.763Z,1528905922.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:22.952Z,1528905922.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:23.152Z,1528905923.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:23.387Z,1528905923.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:23.528Z,1528905923.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:23.779Z,1528905923.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:23.827Z,1528905923.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:24.186Z,1528905924.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:24.221Z,1528905924.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:24.590Z,1528905924.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:24.632Z,1528905924.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:24.986Z,1528905924.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:25.005Z,1528905925.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:25.377Z,1528905925.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:25.396Z,1528905925.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:25.778Z,1528905925.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:25.855Z,1528905925.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:26.184Z,1528905926.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:26.204Z,1528905926.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:26.579Z,1528905926.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:26.597Z,1528905926.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:26.979Z,1528905926.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:27.012Z,1528905927.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:27.386Z,1528905927.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:27.406Z,1528905927.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:27.786Z,1528905927.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:27.806Z,1528905927.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:28.186Z,1528905928.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:28.205Z,1528905928.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:28.581Z,1528905928.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:28.599Z,1528905928.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:28.977Z,1528905928.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:28.995Z,1528905928.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:29.382Z,1528905929.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:29.400Z,1528905929.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:29.779Z,1528905929.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:29.813Z,1528905929.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:30.190Z,1528905930.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:30.209Z,1528905930.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:30.590Z,1528905930.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:30.608Z,1528905930.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:30.990Z,1528905930.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:31.008Z,1528905931.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:31.371Z,1528905931.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:31.400Z,1528905931.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:31.779Z,1528905931.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:31.803Z,1528905931.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:32.181Z,1528905932.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:32.199Z,1528905932.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:32.575Z,1528905932.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:32.620Z,1528905932.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:32.975Z,1528905932.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:33.002Z,1528905933.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:33.381Z,1528905933.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:33.416Z,1528905933.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:33.792Z,1528905933.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:33.810Z,1528905933.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:34.195Z,1528905934.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:34.220Z,1528905934.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:34.575Z,1528905934.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:34.613Z,1528905934.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:34.971Z,1528905934.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:35.011Z,1528905935.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:35.376Z,1528905935.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:35.407Z,1528905935.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:35.775Z,1528905935.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:35.808Z,1528905935.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:36.196Z,1528905936.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:36.214Z,1528905936.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:36.592Z,1528905936.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:36.616Z,1528905936.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:36.990Z,1528905936.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:37.014Z,1528905937.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:37.371Z,1528905937.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:37.410Z,1528905937.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:37.775Z,1528905937.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:37.808Z,1528905937.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:38.179Z,1528905938.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:38.206Z,1528905938.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:38.575Z,1528905938.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:38.609Z,1528905938.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:41.694Z,1528905941.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:41.712Z,1528905941.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:41.848Z,1528905941.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:41.900Z,1528905941.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:42.248Z,1528905942.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:42.267Z,1528905942.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:42.648Z,1528905942.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:42.671Z,1528905942.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:43.027Z,1528905943.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:43.060Z,1528905943.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:43.428Z,1528905943.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:43.459Z,1528905943.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:43.823Z,1528905943.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:43.859Z,1528905943.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:44.244Z,1528905944.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:44.266Z,1528905944.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:44.645Z,1528905944.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:44.662Z,1528905944.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:45.044Z,1528905945.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:45.068Z,1528905945.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:45.427Z,1528905945.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:45.461Z,1528905945.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:45.827Z,1528905945.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:45.860Z,1528905945.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:46.224Z,1528905946.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:46.265Z,1528905946.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:46.628Z,1528905946.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:46.666Z,1528905946.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:47.023Z,1528905947.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:47.040Z,1528905947.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:47.438Z,1528905947.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:47.479Z,1528905947.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:47.841Z,1528905947.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:47.868Z,1528905947.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:48.242Z,1528905948.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:48.269Z,1528905948.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:48.623Z,1528905948.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:48.641Z,1528905948.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:49.031Z,1528905949.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:49.065Z,1528905949.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:49.428Z,1528905949.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:49.445Z,1528905949.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:49.827Z,1528905949.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:49.852Z,1528905949.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:50.242Z,1528905950.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:50.294Z,1528905950.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:50.641Z,1528905950.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:50.686Z,1528905950.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:51.042Z,1528905951.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:51.075Z,1528905951.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:51.430Z,1528905951.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:51.448Z,1528905951.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:51.830Z,1528905951.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:51.848Z,1528905951.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:52.232Z,1528905952.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:52.250Z,1528905952.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:52.633Z,1528905952.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:52.656Z,1528905952.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:53.031Z,1528905953.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:53.060Z,1528905953.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:53.439Z,1528905953.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:53.456Z,1528905953.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:53.841Z,1528905953.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:53.859Z,1528905953.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:54.242Z,1528905954.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:54.264Z,1528905954.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:54.634Z,1528905954.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:54.656Z,1528905954.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:55.034Z,1528905955.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:55.060Z,1528905955.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:55.435Z,1528905955.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:55.453Z,1528905955.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:55.834Z,1528905955.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:55.856Z,1528905955.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:56.239Z,1528905956.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:56.256Z,1528905956.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:56.644Z,1528905956.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:56.661Z,1528905956.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:57.047Z,1528905957.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:57.072Z,1528905957.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:57.434Z,1528905957.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:57.452Z,1528905957.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:57.837Z,1528905957.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:57.854Z,1528905957.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:58.234Z,1528905958.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:58.256Z,1528905958.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:58.628Z,1528905958.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:58.664Z,1528905958.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:59.027Z,1528905959.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:59.064Z,1528905959.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:59.445Z,1528905959.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:59.468Z,1528905959.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:05:59.849Z,1528905959.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:05:59.867Z,1528905959.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:00.242Z,1528905960.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:00.281Z,1528905960.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:00.631Z,1528905960.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:00.665Z,1528905960.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:01.027Z,1528905961.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:01.044Z,1528905961.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:01.428Z,1528905961.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:01.446Z,1528905961.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:01.830Z,1528905961.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:01.849Z,1528905961.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:02.241Z,1528905962.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:02.279Z,1528905962.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:02.645Z,1528905962.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:02.687Z,1528905962.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:03.041Z,1528905963.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:03.059Z,1528905963.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:03.433Z,1528905963.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:03.451Z,1528905963.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:03.834Z,1528905963.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:03.852Z,1528905963.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:04.233Z,1528905964.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:04.251Z,1528905964.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:04.636Z,1528905964.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:04.654Z,1528905964.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:05.034Z,1528905965.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:05.052Z,1528905965.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:05.438Z,1528905965.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:05.456Z,1528905965.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:05.841Z,1528905965.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:05.859Z,1528905965.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:06.237Z,1528905966.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:06.260Z,1528905966.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:06.627Z,1528905966.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:06.646Z,1528905966.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:07.031Z,1528905967.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:07.054Z,1528905967.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:07.436Z,1528905967.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:07.454Z,1528905967.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:07.833Z,1528905967.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:07.851Z,1528905967.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:08.239Z,1528905968.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:08.264Z,1528905968.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:08.642Z,1528905968.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:08.661Z,1528905968.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:09.038Z,1528905969.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:09.064Z,1528905969.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:09.434Z,1528905969.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:09.452Z,1528905969.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:09.835Z,1528905969.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:09.857Z,1528905969.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:10.229Z,1528905970.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:10.247Z,1528905970.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:10.634Z,1528905970.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:10.652Z,1528905970.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:11.034Z,1528905971.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:11.056Z,1528905971.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:11.440Z,1528905971.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:11.458Z,1528905971.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:11.842Z,1528905971.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:11.864Z,1528905971.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:12.244Z,1528905972.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:12.268Z,1528905972.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:12.633Z,1528905972.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:12.651Z,1528905972.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:13.033Z,1528905973.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:13.051Z,1528905973.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:13.424Z,1528905973.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:13.457Z,1528905973.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:13.823Z,1528905973.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:13.856Z,1528905973.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:14.242Z,1528905974.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:14.268Z,1528905974.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:14.648Z,1528905974.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:14.666Z,1528905974.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:15.044Z,1528905975.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:15.068Z,1528905975.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:15.427Z,1528905975.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:15.454Z,1528905975.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:15.823Z,1528905975.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:15.862Z,1528905975.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:16.224Z,1528905976.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:16.258Z,1528905976.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:16.628Z,1528905976.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:16.664Z,1528905976.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:17.027Z,1528905977.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:17.061Z,1528905977.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:17.444Z,1528905977.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:17.462Z,1528905977.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:17.842Z,1528905977.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:17.865Z,1528905977.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:18.250Z,1528905978.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:18.268Z,1528905978.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:18.623Z,1528905978.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:18.653Z,1528905978.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:19.028Z,1528905979.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:19.064Z,1528905979.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:19.428Z,1528905979.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:19.466Z,1528905979.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:19.827Z,1528905979.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:19.861Z,1528905979.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:20.237Z,1528905980.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:20.272Z,1528905980.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:20.641Z,1528905980.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:20.670Z,1528905980.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:21.038Z,1528905981.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:21.071Z,1528905981.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:21.428Z,1528905981.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:21.446Z,1528905981.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:21.827Z,1528905981.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:21.845Z,1528905981.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:22.237Z,1528905982.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:22.270Z,1528905982.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:22.641Z,1528905982.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:22.666Z,1528905982.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:23.042Z,1528905983.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:23.070Z,1528905983.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:23.428Z,1528905983.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:23.446Z,1528905983.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:23.826Z,1528905983.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:23.844Z,1528905983.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:24.237Z,1528905984.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:24.272Z,1528905984.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:24.641Z,1528905984.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:24.666Z,1528905984.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:25.037Z,1528905985.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:25.071Z,1528905985.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:25.428Z,1528905985.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:25.468Z,1528905985.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:25.828Z,1528905985.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:25.846Z,1528905985.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:26.241Z,1528905986.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:26.274Z,1528905986.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:26.645Z,1528905986.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:26.672Z,1528905986.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:27.037Z,1528905987.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:27.073Z,1528905987.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:27.428Z,1528905987.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:27.452Z,1528905987.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:27.830Z,1528905987.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:27.848Z,1528905987.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:28.238Z,1528905988.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:28.271Z,1528905988.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:28.645Z,1528905988.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:28.678Z,1528905988.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:29.041Z,1528905989.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:29.075Z,1528905989.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:29.431Z,1528905989.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:29.448Z,1528905989.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:29.830Z,1528905989.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:29.848Z,1528905989.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:30.241Z,1528905990.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:30.259Z,1528905990.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:30.637Z,1528905990.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:30.663Z,1528905990.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:31.038Z,1528905991.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:31.055Z,1528905991.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:31.434Z,1528905991.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:31.453Z,1528905991.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:31.829Z,1528905991.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:31.847Z,1528905991.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:32.238Z,1528905992.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:32.255Z,1528905992.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:32.642Z,1528905992.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:32.660Z,1528905992.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:33.035Z,1528905993.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:33.052Z,1528905993.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:33.434Z,1528905993.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:33.452Z,1528905993.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:33.834Z,1528905993.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:33.852Z,1528905993.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:34.238Z,1528905994.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:34.256Z,1528905994.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:34.642Z,1528905994.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:34.660Z,1528905994.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:35.042Z,1528905995.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:35.059Z,1528905995.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:35.431Z,1528905995.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:35.449Z,1528905995.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:35.827Z,1528905995.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:35.859Z,1528905995.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:36.241Z,1528905996.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:36.260Z,1528905996.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:36.642Z,1528905996.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:36.659Z,1528905996.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:37.038Z,1528905997.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:37.056Z,1528905997.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:37.436Z,1528905997.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:37.454Z,1528905997.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:37.830Z,1528905997.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:37.847Z,1528905997.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:38.238Z,1528905998.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:38.256Z,1528905998.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:38.642Z,1528905998.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:38.660Z,1528905998.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:41.749Z,1528906001.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:41.788Z,1528906001.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:41.903Z,1528906001.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:41.944Z,1528906001.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:42.303Z,1528906002.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:42.345Z,1528906002.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:42.700Z,1528906002.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:42.719Z,1528906002.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:43.102Z,1528906003.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:43.120Z,1528906003.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:43.513Z,1528906003.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:43.547Z,1528906003.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:43.913Z,1528906003.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:43.954Z,1528906003.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:44.314Z,1528906004.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:44.352Z,1528906004.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:44.706Z,1528906004.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:44.724Z,1528906004.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:45.099Z,1528906005.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:45.123Z,1528906005.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:45.504Z,1528906005.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:45.531Z,1528906005.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:45.903Z,1528906005.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:45.929Z,1528906005.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:46.315Z,1528906006.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:46.340Z,1528906006.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:46.718Z,1528906006.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:46.744Z,1528906006.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:47.119Z,1528906007.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:47.144Z,1528906007.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:47.495Z,1528906007.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:47.533Z,1528906007.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:47.899Z,1528906007.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:47.936Z,1528906007.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:48.300Z,1528906008.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:48.333Z,1528906008.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:48.700Z,1528906008.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:48.727Z,1528906008.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:49.099Z,1528906009.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:49.135Z,1528906009.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:49.520Z,1528906009.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:49.544Z,1528906009.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:49.915Z,1528906009.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:49.933Z,1528906009.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:50.306Z,1528906010.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:50.341Z,1528906010.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:50.699Z,1528906010.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:50.740Z,1528906010.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:51.099Z,1528906011.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:51.136Z,1528906011.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:51.499Z,1528906011.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:51.529Z,1528906011.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:51.903Z,1528906011.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:51.945Z,1528906011.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:52.314Z,1528906012.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:52.343Z,1528906012.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:52.713Z,1528906012.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:52.740Z,1528906012.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:53.113Z,1528906013.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:53.143Z,1528906013.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:53.500Z,1528906013.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:53.540Z,1528906013.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:53.900Z,1528906013.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:53.934Z,1528906013.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:54.303Z,1528906014.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:54.322Z,1528906014.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:54.697Z,1528906014.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:54.716Z,1528906014.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:55.102Z,1528906015.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:55.121Z,1528906015.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:55.514Z,1528906015.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:55.548Z,1528906015.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:55.913Z,1528906015.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:55.952Z,1528906015.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:56.310Z,1528906016.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:56.330Z,1528906016.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:56.706Z,1528906016.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:56.724Z,1528906016.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:57.099Z,1528906017.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:57.131Z,1528906017.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:57.505Z,1528906017.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:57.523Z,1528906017.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:57.906Z,1528906017.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:57.924Z,1528906017.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:58.310Z,1528906018.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:58.328Z,1528906018.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:58.713Z,1528906018.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:58.731Z,1528906018.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:59.114Z,1528906019.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:59.132Z,1528906019.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:59.499Z,1528906019.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:59.532Z,1528906019.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:06:59.903Z,1528906019.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:06:59.926Z,1528906019.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:00.306Z,1528906020.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:00.324Z,1528906020.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:00.706Z,1528906020.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:00.724Z,1528906020.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:01.103Z,1528906021.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:01.126Z,1528906021.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:01.518Z,1528906021.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:01.536Z,1528906021.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:01.915Z,1528906021.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:01.933Z,1528906021.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:02.314Z,1528906022.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:02.331Z,1528906022.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:02.706Z,1528906022.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:02.724Z,1528906022.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:03.105Z,1528906023.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:03.123Z,1528906023.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:03.505Z,1528906023.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:03.523Z,1528906023.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:03.906Z,1528906023.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:03.925Z,1528906023.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:04.314Z,1528906024.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:04.332Z,1528906024.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:04.714Z,1528906024.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:04.736Z,1528906024.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:05.114Z,1528906025.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:05.132Z,1528906025.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:05.501Z,1528906025.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:05.519Z,1528906025.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:05.904Z,1528906025.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:05.923Z,1528906025.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:06.306Z,1528906026.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:06.324Z,1528906026.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:06.703Z,1528906026.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:06.727Z,1528906026.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:07.105Z,1528906027.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:07.123Z,1528906027.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:07.514Z,1528906027.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:07.533Z,1528906027.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:07.915Z,1528906027.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:07.933Z,1528906027.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:08.314Z,1528906028.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:08.332Z,1528906028.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:08.706Z,1528906028.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:08.738Z,1528906028.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:09.099Z,1528906029.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:09.122Z,1528906029.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:09.506Z,1528906029.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:09.524Z,1528906029.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:09.903Z,1528906029.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:09.928Z,1528906029.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:10.310Z,1528906030.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:10.328Z,1528906030.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:10.715Z,1528906030.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:10.736Z,1528906030.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:11.114Z,1528906031.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:11.132Z,1528906031.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:11.499Z,1528906031.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:11.523Z,1528906031.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:11.903Z,1528906031.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:11.926Z,1528906031.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:12.315Z,1528906032.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:12.340Z,1528906032.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:12.714Z,1528906032.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:12.732Z,1528906032.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:13.114Z,1528906033.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:13.131Z,1528906033.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:13.504Z,1528906033.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:13.535Z,1528906033.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:13.895Z,1528906033.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:13.922Z,1528906033.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:14.315Z,1528906034.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:14.333Z,1528906034.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:14.720Z,1528906034.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:14.738Z,1528906034.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:15.111Z,1528906035.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:15.129Z,1528906035.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:15.495Z,1528906035.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:15.532Z,1528906035.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:15.899Z,1528906035.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:15.934Z,1528906035.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:16.315Z,1528906036.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:16.334Z,1528906036.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:16.719Z,1528906036.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:16.744Z,1528906036.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:17.120Z,1528906037.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:17.138Z,1528906037.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:17.499Z,1528906037.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:17.529Z,1528906037.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:17.899Z,1528906037.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:17.926Z,1528906037.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:18.321Z,1528906038.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:18.339Z,1528906038.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:18.715Z,1528906038.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:18.733Z,1528906038.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:19.115Z,1528906039.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:19.140Z,1528906039.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:19.500Z,1528906039.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:19.539Z,1528906039.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:19.899Z,1528906039.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:19.926Z,1528906039.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:20.317Z,1528906040.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:20.340Z,1528906040.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:20.720Z,1528906040.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:20.739Z,1528906040.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:21.116Z,1528906041.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:21.134Z,1528906041.134 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:21.134Z,1528906041.134 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 253
2018-06-13T16:07:21.134Z,1528906041.134 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:07:21.136Z,1528906041.136 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:21.136Z,1528906041.136 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 253
2018-06-13T16:07:21.136Z,1528906041.136 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:07:21.138Z,1528906041.138 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:21.138Z,1528906041.138 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 253
2018-06-13T16:07:21.138Z,1528906041.138 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:07:21.217Z,1528906041.217 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:07:21.217Z,1528906041.217 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:07:21.218Z,1528906041.218 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:07:21.507Z,1528906041.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:21.623Z,1528906041.623 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:07:21.623Z,1528906041.623 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 253
2018-06-13T16:07:21.624Z,1528906041.624 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:07:21.624Z,1528906041.624 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 253
2018-06-13T16:07:21.626Z,1528906041.626 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:07:21.626Z,1528906041.626 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 253
2018-06-13T16:07:21.900Z,1528906041.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:21.916Z,1528906041.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:07:21.933Z,1528906041.933 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:07:21.933Z,1528906041.933 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:07:21.934Z,1528906041.934 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:07:21.934Z,1528906041.934 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:07:21.934Z,1528906041.934 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:07:21.935Z,1528906041.935 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:07:21.935Z,1528906041.935 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:07:21.935Z,1528906041.935 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:07:22.313Z,1528906042.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:22.348Z,1528906042.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:07:22.348Z,1528906042.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:22.713Z,1528906042.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:22.737Z,1528906042.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:07:22.738Z,1528906042.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:23.114Z,1528906043.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:23.148Z,1528906043.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:07:23.149Z,1528906043.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:23.498Z,1528906043.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:23.540Z,1528906043.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:07:23.545Z,1528906043.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:23.901Z,1528906043.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:23.919Z,1528906043.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:07:23.920Z,1528906043.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:24.314Z,1528906044.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:24.353Z,1528906044.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:07:24.354Z,1528906044.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:24.709Z,1528906044.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:24.746Z,1528906044.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:07:24.747Z,1528906044.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:25.113Z,1528906045.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:25.146Z,1528906045.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:07:25.147Z,1528906045.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:25.501Z,1528906045.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:25.524Z,1528906045.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:07:25.541Z,1528906045.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:25.898Z,1528906045.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:25.915Z,1528906045.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:07:25.916Z,1528906045.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:26.313Z,1528906046.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:26.343Z,1528906046.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:07:26.344Z,1528906046.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:26.713Z,1528906046.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:26.731Z,1528906046.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:07:26.732Z,1528906046.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:27.114Z,1528906047.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:27.159Z,1528906047.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:07:27.160Z,1528906047.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:27.503Z,1528906047.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:27.535Z,1528906047.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:07:27.536Z,1528906047.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:27.899Z,1528906047.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:27.936Z,1528906047.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:07:27.941Z,1528906047.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:28.310Z,1528906048.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:28.332Z,1528906048.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:07:28.333Z,1528906048.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:28.715Z,1528906048.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:28.732Z,1528906048.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:07:28.733Z,1528906048.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:29.115Z,1528906049.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:29.140Z,1528906049.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:07:29.157Z,1528906049.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:29.506Z,1528906049.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:29.524Z,1528906049.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:07:29.525Z,1528906049.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:29.903Z,1528906049.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:29.927Z,1528906049.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:07:29.928Z,1528906049.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:30.317Z,1528906050.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:30.335Z,1528906050.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:07:30.336Z,1528906050.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:30.715Z,1528906050.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:30.732Z,1528906050.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:07:30.733Z,1528906050.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:31.112Z,1528906051.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:31.130Z,1528906051.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:07:31.131Z,1528906051.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:31.508Z,1528906051.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:31.526Z,1528906051.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:07:31.527Z,1528906051.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:31.899Z,1528906051.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:31.937Z,1528906051.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:07:31.938Z,1528906051.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:32.316Z,1528906052.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:32.334Z,1528906052.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:07:32.335Z,1528906052.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:32.716Z,1528906052.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:32.734Z,1528906052.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:07:32.735Z,1528906052.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:33.112Z,1528906053.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:33.136Z,1528906053.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:07:33.137Z,1528906053.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:33.503Z,1528906053.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:33.528Z,1528906053.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:07:33.529Z,1528906053.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:33.901Z,1528906053.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:33.920Z,1528906053.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:07:33.921Z,1528906053.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:34.310Z,1528906054.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:34.335Z,1528906054.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:07:34.336Z,1528906054.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:34.723Z,1528906054.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:34.740Z,1528906054.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:07:34.742Z,1528906054.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:35.115Z,1528906055.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:35.133Z,1528906055.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:07:35.134Z,1528906055.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:35.496Z,1528906055.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:35.522Z,1528906055.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:07:35.523Z,1528906055.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:35.899Z,1528906055.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:35.932Z,1528906055.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:07:35.934Z,1528906055.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:36.315Z,1528906056.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:36.332Z,1528906056.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:07:36.334Z,1528906056.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:36.714Z,1528906056.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:36.746Z,1528906056.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:07:36.747Z,1528906056.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:37.115Z,1528906057.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:37.132Z,1528906057.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:07:37.134Z,1528906057.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:37.499Z,1528906057.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:37.526Z,1528906057.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:07:37.527Z,1528906057.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:37.895Z,1528906057.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:37.935Z,1528906057.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:07:37.936Z,1528906057.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:38.322Z,1528906058.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:38.340Z,1528906058.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:07:38.341Z,1528906058.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:38.721Z,1528906058.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:38.738Z,1528906058.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:07:38.739Z,1528906058.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:41.826Z,1528906061.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:41.844Z,1528906061.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:41.974Z,1528906061.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:42.020Z,1528906062.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:42.374Z,1528906062.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:42.392Z,1528906062.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:42.776Z,1528906062.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:42.794Z,1528906062.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:43.170Z,1528906063.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:43.188Z,1528906063.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:43.581Z,1528906063.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:43.599Z,1528906063.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:43.981Z,1528906063.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:43.999Z,1528906063.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:44.377Z,1528906064.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:44.395Z,1528906064.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:44.771Z,1528906064.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:44.788Z,1528906064.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:45.167Z,1528906065.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:45.189Z,1528906065.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:45.572Z,1528906065.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:45.593Z,1528906065.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:45.969Z,1528906065.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:45.987Z,1528906065.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:46.374Z,1528906066.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:46.396Z,1528906066.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:46.782Z,1528906066.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:46.800Z,1528906066.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:47.177Z,1528906067.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:47.200Z,1528906067.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:47.567Z,1528906067.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:47.601Z,1528906067.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:47.971Z,1528906067.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:47.996Z,1528906067.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:48.369Z,1528906068.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:48.392Z,1528906068.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:48.767Z,1528906068.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:48.790Z,1528906068.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:49.171Z,1528906069.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:49.202Z,1528906069.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:49.581Z,1528906069.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:49.599Z,1528906069.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:49.981Z,1528906069.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:49.999Z,1528906069.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:50.378Z,1528906070.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:50.396Z,1528906070.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:50.773Z,1528906070.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:50.791Z,1528906070.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:51.167Z,1528906071.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:51.190Z,1528906071.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:51.574Z,1528906071.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:51.592Z,1528906071.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:51.973Z,1528906071.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:51.991Z,1528906071.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:52.378Z,1528906072.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:52.396Z,1528906072.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:52.781Z,1528906072.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:52.799Z,1528906072.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:53.178Z,1528906073.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:53.196Z,1528906073.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:53.574Z,1528906073.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:53.592Z,1528906073.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:53.972Z,1528906073.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:53.990Z,1528906073.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:54.384Z,1528906074.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:54.402Z,1528906074.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:54.781Z,1528906074.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:54.799Z,1528906074.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:55.178Z,1528906075.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:55.200Z,1528906075.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:55.574Z,1528906075.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:55.591Z,1528906075.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:55.973Z,1528906075.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:55.990Z,1528906075.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:56.379Z,1528906076.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:56.397Z,1528906076.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:56.781Z,1528906076.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:56.798Z,1528906076.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:57.178Z,1528906077.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:57.200Z,1528906077.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:57.574Z,1528906077.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:57.591Z,1528906077.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:57.969Z,1528906077.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:57.992Z,1528906077.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:58.379Z,1528906078.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:58.404Z,1528906078.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:58.781Z,1528906078.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:58.799Z,1528906078.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:59.181Z,1528906079.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:59.204Z,1528906079.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:59.573Z,1528906079.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:59.591Z,1528906079.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:07:59.971Z,1528906079.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:07:59.993Z,1528906079.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:00.381Z,1528906080.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:00.400Z,1528906080.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:00.782Z,1528906080.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:00.807Z,1528906080.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:01.182Z,1528906081.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:01.199Z,1528906081.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:01.574Z,1528906081.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:01.591Z,1528906081.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:01.973Z,1528906081.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:01.991Z,1528906081.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:02.378Z,1528906082.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:02.400Z,1528906082.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:02.781Z,1528906082.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:02.798Z,1528906082.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:03.178Z,1528906083.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:03.200Z,1528906083.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:03.573Z,1528906083.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:03.591Z,1528906083.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:03.971Z,1528906083.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:03.996Z,1528906083.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:04.383Z,1528906084.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:04.401Z,1528906084.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:04.782Z,1528906084.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:04.804Z,1528906084.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:05.183Z,1528906085.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:05.208Z,1528906085.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:05.574Z,1528906085.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:05.596Z,1528906085.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:05.973Z,1528906085.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:05.991Z,1528906085.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:06.383Z,1528906086.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:06.401Z,1528906086.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:06.785Z,1528906086.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:06.803Z,1528906086.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:07.182Z,1528906087.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:07.204Z,1528906087.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:07.572Z,1528906087.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:07.604Z,1528906087.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:07.975Z,1528906087.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:07.992Z,1528906087.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:08.383Z,1528906088.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:08.401Z,1528906088.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:08.784Z,1528906088.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:08.808Z,1528906088.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:09.181Z,1528906089.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:09.199Z,1528906089.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:09.574Z,1528906089.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:09.592Z,1528906089.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:09.971Z,1528906089.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:10.004Z,1528906090.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:10.383Z,1528906090.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:10.400Z,1528906090.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:10.782Z,1528906090.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:10.808Z,1528906090.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:11.183Z,1528906091.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:11.201Z,1528906091.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:11.574Z,1528906091.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:11.596Z,1528906091.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:11.971Z,1528906091.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:11.993Z,1528906091.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:12.383Z,1528906092.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:12.402Z,1528906092.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:12.783Z,1528906092.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:12.800Z,1528906092.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:13.183Z,1528906093.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:13.200Z,1528906093.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:13.569Z,1528906093.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:13.592Z,1528906093.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:13.973Z,1528906093.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:13.996Z,1528906093.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:14.380Z,1528906094.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:14.404Z,1528906094.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:14.784Z,1528906094.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:14.808Z,1528906094.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:15.183Z,1528906095.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:15.201Z,1528906095.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:15.568Z,1528906095.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:15.599Z,1528906095.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:15.972Z,1528906095.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:16.001Z,1528906096.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:16.383Z,1528906096.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:16.401Z,1528906096.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:16.782Z,1528906096.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:16.801Z,1528906096.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:17.185Z,1528906097.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:17.203Z,1528906097.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:17.575Z,1528906097.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:17.593Z,1528906097.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:17.966Z,1528906097.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:17.999Z,1528906097.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:18.384Z,1528906098.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:18.408Z,1528906098.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:18.783Z,1528906098.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:18.800Z,1528906098.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:19.182Z,1528906099.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:19.200Z,1528906099.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:19.566Z,1528906099.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:19.604Z,1528906099.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:19.973Z,1528906099.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:19.990Z,1528906099.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:20.383Z,1528906100.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:20.402Z,1528906100.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:20.787Z,1528906100.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:20.806Z,1528906100.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:21.178Z,1528906101.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:21.200Z,1528906101.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:21.571Z,1528906101.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:21.610Z,1528906101.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:21.967Z,1528906101.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:22.008Z,1528906102.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:22.387Z,1528906102.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:22.405Z,1528906102.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:22.783Z,1528906102.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:22.801Z,1528906102.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:23.187Z,1528906103.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:23.212Z,1528906103.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:23.568Z,1528906103.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:23.604Z,1528906103.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:23.967Z,1528906103.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:24.000Z,1528906104.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:24.389Z,1528906104.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:24.407Z,1528906104.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:24.786Z,1528906104.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:24.804Z,1528906104.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:25.173Z,1528906105.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:25.207Z,1528906105.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:25.568Z,1528906105.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:25.605Z,1528906105.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:25.967Z,1528906105.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:25.999Z,1528906105.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:26.384Z,1528906106.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:26.402Z,1528906106.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:26.787Z,1528906106.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:26.810Z,1528906106.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:27.188Z,1528906107.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:27.215Z,1528906107.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:27.567Z,1528906107.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:27.599Z,1528906107.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:27.967Z,1528906107.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:28.006Z,1528906108.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:28.377Z,1528906108.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:28.409Z,1528906108.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:28.787Z,1528906108.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:28.805Z,1528906108.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:29.186Z,1528906109.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:29.216Z,1528906109.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:29.567Z,1528906109.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:29.605Z,1528906109.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:29.968Z,1528906109.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:29.985Z,1528906109.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:30.368Z,1528906110.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:30.390Z,1528906110.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:30.774Z,1528906110.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:30.791Z,1528906110.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:31.181Z,1528906111.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:31.214Z,1528906111.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:31.577Z,1528906111.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:31.595Z,1528906111.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:31.970Z,1528906111.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:31.988Z,1528906111.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:32.370Z,1528906112.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:32.387Z,1528906112.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:32.770Z,1528906112.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:32.788Z,1528906112.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:33.167Z,1528906113.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:33.189Z,1528906113.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:33.577Z,1528906113.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:33.595Z,1528906113.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:33.981Z,1528906113.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:33.999Z,1528906113.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:34.378Z,1528906114.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:34.395Z,1528906114.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:34.772Z,1528906114.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:34.790Z,1528906114.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:35.172Z,1528906115.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:35.191Z,1528906115.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:35.567Z,1528906115.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:35.589Z,1528906115.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:35.972Z,1528906115.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:35.991Z,1528906115.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:36.373Z,1528906116.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:36.391Z,1528906116.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:36.778Z,1528906116.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:36.795Z,1528906116.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:37.181Z,1528906117.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:37.199Z,1528906117.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:37.581Z,1528906117.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:37.599Z,1528906117.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:37.967Z,1528906117.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:37.990Z,1528906117.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:38.374Z,1528906118.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:38.392Z,1528906118.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:38.776Z,1528906118.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:38.794Z,1528906118.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:39.176Z,1528906119.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:39.194Z,1528906119.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:39.581Z,1528906119.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:39.599Z,1528906119.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:39.985Z,1528906119.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:40.003Z,1528906120.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:40.378Z,1528906120.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:40.400Z,1528906120.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:40.776Z,1528906120.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:40.794Z,1528906120.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:41.177Z,1528906121.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:41.195Z,1528906121.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:41.576Z,1528906121.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:41.594Z,1528906121.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:41.977Z,1528906121.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:41.995Z,1528906121.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:45.091Z,1528906125.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:45.108Z,1528906125.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:45.249Z,1528906125.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:45.297Z,1528906125.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:45.667Z,1528906125.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:45.684Z,1528906125.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:46.064Z,1528906126.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:46.083Z,1528906126.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:46.439Z,1528906126.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:46.479Z,1528906126.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:46.844Z,1528906126.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:46.874Z,1528906126.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:47.243Z,1528906127.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:47.277Z,1528906127.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:47.653Z,1528906127.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:47.687Z,1528906127.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:48.057Z,1528906128.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:48.084Z,1528906128.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:48.457Z,1528906128.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:48.486Z,1528906128.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:48.844Z,1528906128.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:48.862Z,1528906128.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:49.247Z,1528906129.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:49.264Z,1528906129.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:49.648Z,1528906129.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:49.666Z,1528906129.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:50.042Z,1528906130.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:50.060Z,1528906130.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:50.457Z,1528906130.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:50.491Z,1528906130.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:50.861Z,1528906130.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:50.895Z,1528906130.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:51.254Z,1528906131.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:51.271Z,1528906131.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:51.649Z,1528906131.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:51.667Z,1528906131.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:52.050Z,1528906132.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:52.068Z,1528906132.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:52.450Z,1528906132.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:52.472Z,1528906132.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:52.857Z,1528906132.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:52.876Z,1528906132.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:53.257Z,1528906133.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:53.275Z,1528906133.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:53.651Z,1528906133.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:53.668Z,1528906133.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:54.049Z,1528906134.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:54.066Z,1528906134.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:54.457Z,1528906134.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:54.475Z,1528906134.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:54.854Z,1528906134.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:54.876Z,1528906134.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:55.254Z,1528906135.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:55.272Z,1528906135.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:55.647Z,1528906135.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:55.674Z,1528906135.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:56.048Z,1528906136.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:56.066Z,1528906136.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:56.454Z,1528906136.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:56.472Z,1528906136.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:56.858Z,1528906136.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:56.876Z,1528906136.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:57.254Z,1528906137.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:57.272Z,1528906137.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:57.648Z,1528906137.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:57.667Z,1528906137.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:58.050Z,1528906138.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:58.068Z,1528906138.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:58.454Z,1528906138.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:58.471Z,1528906138.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:58.857Z,1528906138.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:58.875Z,1528906138.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:59.253Z,1528906139.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:59.271Z,1528906139.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:08:59.646Z,1528906139.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:08:59.664Z,1528906139.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:00.048Z,1528906140.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:00.066Z,1528906140.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:00.458Z,1528906140.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:00.476Z,1528906140.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:00.855Z,1528906140.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:00.873Z,1528906140.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:01.258Z,1528906141.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:01.275Z,1528906141.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:01.648Z,1528906141.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:01.674Z,1528906141.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:02.043Z,1528906142.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:02.068Z,1528906142.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:02.455Z,1528906142.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:02.474Z,1528906142.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:02.857Z,1528906142.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:02.875Z,1528906142.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:03.255Z,1528906143.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:03.273Z,1528906143.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:03.648Z,1528906143.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:03.690Z,1528906143.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:04.047Z,1528906144.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:04.080Z,1528906144.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:04.452Z,1528906144.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:04.488Z,1528906144.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:04.859Z,1528906144.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:04.876Z,1528906144.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:05.259Z,1528906145.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:05.278Z,1528906145.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:05.650Z,1528906145.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:05.669Z,1528906145.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:06.047Z,1528906146.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:06.070Z,1528906146.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:06.459Z,1528906146.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:06.481Z,1528906146.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:06.858Z,1528906146.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:06.875Z,1528906146.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:07.257Z,1528906147.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:07.280Z,1528906147.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:07.648Z,1528906147.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:07.674Z,1528906147.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:08.049Z,1528906148.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:08.067Z,1528906148.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:08.458Z,1528906148.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:08.483Z,1528906148.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:08.859Z,1528906148.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:08.876Z,1528906148.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:09.255Z,1528906149.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:09.274Z,1528906149.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:09.650Z,1528906149.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:09.667Z,1528906149.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:10.051Z,1528906150.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:10.069Z,1528906150.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:10.456Z,1528906150.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:10.473Z,1528906150.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:10.862Z,1528906150.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:10.880Z,1528906150.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:11.263Z,1528906151.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:11.281Z,1528906151.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:11.650Z,1528906151.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:11.668Z,1528906151.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:12.050Z,1528906152.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:12.068Z,1528906152.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:12.463Z,1528906152.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:12.480Z,1528906152.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:12.862Z,1528906152.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:12.884Z,1528906152.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:13.259Z,1528906153.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:13.277Z,1528906153.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:13.651Z,1528906153.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:13.669Z,1528906153.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:14.039Z,1528906154.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:14.076Z,1528906154.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:14.459Z,1528906154.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:14.477Z,1528906154.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:14.863Z,1528906154.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:14.881Z,1528906154.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:15.258Z,1528906155.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:15.280Z,1528906155.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:15.649Z,1528906155.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:15.667Z,1528906155.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:16.050Z,1528906156.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:16.085Z,1528906156.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:16.456Z,1528906156.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:16.473Z,1528906156.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:16.863Z,1528906156.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:16.880Z,1528906156.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:17.263Z,1528906157.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:17.281Z,1528906157.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:17.644Z,1528906157.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:17.671Z,1528906157.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:18.043Z,1528906158.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:18.070Z,1528906158.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:18.463Z,1528906158.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:18.481Z,1528906158.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:18.858Z,1528906158.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:18.890Z,1528906158.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:19.259Z,1528906159.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:19.277Z,1528906159.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:19.644Z,1528906159.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:19.673Z,1528906159.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:20.044Z,1528906160.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:20.070Z,1528906160.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:20.443Z,1528906160.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:20.475Z,1528906160.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:20.864Z,1528906160.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:20.882Z,1528906160.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:21.263Z,1528906161.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:21.281Z,1528906161.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:21.660Z,1528906161.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:21.684Z,1528906161.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:22.043Z,1528906162.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:22.077Z,1528906162.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:22.439Z,1528906162.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:22.466Z,1528906162.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:22.844Z,1528906162.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:22.876Z,1528906162.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:23.243Z,1528906163.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:23.272Z,1528906163.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:23.655Z,1528906163.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:23.678Z,1528906163.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:24.062Z,1528906164.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:24.084Z,1528906164.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:24.464Z,1528906164.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:24.482Z,1528906164.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:24.843Z,1528906164.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:24.870Z,1528906164.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:25.243Z,1528906165.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:25.270Z,1528906165.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:25.644Z,1528906165.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:25.678Z,1528906165.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:26.040Z,1528906166.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:26.079Z,1528906166.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:26.444Z,1528906166.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:26.479Z,1528906166.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:26.868Z,1528906166.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:26.894Z,1528906166.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:27.259Z,1528906167.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:27.277Z,1528906167.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:27.659Z,1528906167.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:27.677Z,1528906167.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:28.043Z,1528906168.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:28.080Z,1528906168.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:28.439Z,1528906168.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:28.478Z,1528906168.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:28.844Z,1528906168.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:28.881Z,1528906168.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:29.243Z,1528906169.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:29.270Z,1528906169.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:29.653Z,1528906169.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:29.687Z,1528906169.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:30.057Z,1528906170.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:30.084Z,1528906170.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:30.458Z,1528906170.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:30.488Z,1528906170.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:30.843Z,1528906170.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:30.864Z,1528906170.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:31.247Z,1528906171.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:31.294Z,1528906171.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:31.644Z,1528906171.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:31.662Z,1528906171.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:32.044Z,1528906172.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:32.068Z,1528906172.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:32.447Z,1528906172.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:32.472Z,1528906172.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:32.857Z,1528906172.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:32.891Z,1528906172.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:33.254Z,1528906173.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:33.271Z,1528906173.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:33.658Z,1528906173.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:33.675Z,1528906173.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:34.049Z,1528906174.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:34.067Z,1528906174.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:34.445Z,1528906174.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:34.463Z,1528906174.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:34.848Z,1528906174.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:34.866Z,1528906174.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:35.250Z,1528906175.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:35.268Z,1528906175.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:35.650Z,1528906175.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:35.676Z,1528906175.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:36.058Z,1528906176.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:36.075Z,1528906176.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:36.458Z,1528906176.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:36.476Z,1528906176.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:36.842Z,1528906176.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:36.868Z,1528906176.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:37.247Z,1528906177.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:37.271Z,1528906177.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:37.650Z,1528906177.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:37.668Z,1528906177.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:38.044Z,1528906178.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:38.070Z,1528906178.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:38.454Z,1528906178.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:38.476Z,1528906178.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:38.479Z,1528906178.479 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T16:09:38.479Z,1528906178.479 [Default:CheckIn:C.Wait] Stopped
2018-06-13T16:09:38.479Z,1528906178.479 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T16:09:38.479Z,1528906178.479 [Default:CheckIn:D] Running Loop=1
2018-06-13T16:09:38.863Z,1528906178.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:38.882Z,1528906178.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:38.885Z,1528906178.885 [Default:CheckIn:D] Stopped
2018-06-13T16:09:38.885Z,1528906178.885 [Default:CheckIn:E] Running Loop=1
2018-06-13T16:09:41.965Z,1528906181.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:41.983Z,1528906181.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:41.987Z,1528906181.987 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 762.423958 min 
2018-06-13T16:09:41.987Z,1528906181.987 [Default:CheckIn:E] Stopped
2018-06-13T16:09:41.987Z,1528906181.987 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T16:09:41.987Z,1528906181.987 [Default:CheckIn] Stopped
2018-06-13T16:09:41.987Z,1528906181.987 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T16:09:41.988Z,1528906181.988 [Default:CheckIn](INFO): Running loop #74
2018-06-13T16:09:41.988Z,1528906181.988 [Default:CheckIn] Running Loop=74
2018-06-13T16:09:41.988Z,1528906181.988 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T16:09:41.988Z,1528906181.988 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T16:09:42.106Z,1528906182.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:42.145Z,1528906182.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:42.499Z,1528906182.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:42.529Z,1528906182.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:42.896Z,1528906182.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:42.927Z,1528906182.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:43.295Z,1528906183.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:43.333Z,1528906183.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:43.705Z,1528906183.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:43.749Z,1528906183.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:44.109Z,1528906184.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:44.145Z,1528906184.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:44.505Z,1528906184.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:44.532Z,1528906184.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:44.895Z,1528906184.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:44.929Z,1528906184.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:45.291Z,1528906185.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:45.309Z,1528906185.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:45.699Z,1528906185.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:45.733Z,1528906185.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:46.100Z,1528906186.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:46.118Z,1528906186.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:46.505Z,1528906186.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:46.523Z,1528906186.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:46.913Z,1528906186.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:46.946Z,1528906186.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:47.309Z,1528906187.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:47.347Z,1528906187.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:47.699Z,1528906187.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:47.717Z,1528906187.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:48.099Z,1528906188.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:48.117Z,1528906188.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:48.506Z,1528906188.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:48.524Z,1528906188.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:48.910Z,1528906188.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:48.928Z,1528906188.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:49.306Z,1528906189.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:49.324Z,1528906189.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:49.701Z,1528906189.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:49.720Z,1528906189.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:50.095Z,1528906190.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:50.118Z,1528906190.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:50.505Z,1528906190.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:50.524Z,1528906190.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:50.905Z,1528906190.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:50.925Z,1528906190.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:51.306Z,1528906191.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:51.327Z,1528906191.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:51.700Z,1528906191.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:51.724Z,1528906191.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:52.101Z,1528906192.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:52.119Z,1528906192.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:52.506Z,1528906192.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:52.528Z,1528906192.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:52.910Z,1528906192.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:52.928Z,1528906192.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:53.307Z,1528906193.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:53.332Z,1528906193.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:53.695Z,1528906193.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:53.718Z,1528906193.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:54.099Z,1528906194.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:54.130Z,1528906194.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:54.497Z,1528906194.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:54.520Z,1528906194.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:54.906Z,1528906194.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:54.924Z,1528906194.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:55.309Z,1528906195.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:55.327Z,1528906195.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:55.707Z,1528906195.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:55.724Z,1528906195.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:56.095Z,1528906196.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:56.118Z,1528906196.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:56.499Z,1528906196.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:56.521Z,1528906196.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:56.902Z,1528906196.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:56.919Z,1528906196.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:57.295Z,1528906197.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:57.334Z,1528906197.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:57.711Z,1528906197.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:57.729Z,1528906197.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:58.110Z,1528906198.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:58.127Z,1528906198.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:58.508Z,1528906198.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:58.525Z,1528906198.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:58.901Z,1528906198.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:58.918Z,1528906198.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:59.301Z,1528906199.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:59.319Z,1528906199.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:09:59.695Z,1528906199.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:09:59.719Z,1528906199.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:00.101Z,1528906200.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:00.119Z,1528906200.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:00.502Z,1528906200.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:00.519Z,1528906200.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:00.910Z,1528906200.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:00.928Z,1528906200.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:01.310Z,1528906201.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:01.332Z,1528906201.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:01.710Z,1528906201.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:01.733Z,1528906201.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:02.101Z,1528906202.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:02.118Z,1528906202.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:02.499Z,1528906202.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:02.523Z,1528906202.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:02.898Z,1528906202.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:02.920Z,1528906202.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:03.300Z,1528906203.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:03.318Z,1528906203.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:03.710Z,1528906203.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:03.727Z,1528906203.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:04.110Z,1528906204.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:04.128Z,1528906204.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:04.511Z,1528906204.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:04.529Z,1528906204.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:04.899Z,1528906204.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:04.921Z,1528906204.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:05.298Z,1528906205.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:05.320Z,1528906205.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:05.701Z,1528906205.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:05.718Z,1528906205.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:06.099Z,1528906206.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:06.122Z,1528906206.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:06.499Z,1528906206.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:06.525Z,1528906206.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:06.910Z,1528906206.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:06.928Z,1528906206.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:07.309Z,1528906207.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:07.327Z,1528906207.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:07.710Z,1528906207.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:07.728Z,1528906207.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:08.101Z,1528906208.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:08.119Z,1528906208.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:08.501Z,1528906208.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:08.518Z,1528906208.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:08.902Z,1528906208.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:08.919Z,1528906208.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:09.301Z,1528906209.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:09.324Z,1528906209.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:09.710Z,1528906209.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:09.727Z,1528906209.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:10.111Z,1528906210.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:10.129Z,1528906210.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:10.511Z,1528906210.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:10.528Z,1528906210.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:10.899Z,1528906210.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:10.922Z,1528906210.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:11.302Z,1528906211.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:11.319Z,1528906211.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:11.700Z,1528906211.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:11.718Z,1528906211.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:12.100Z,1528906212.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:12.126Z,1528906212.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:12.501Z,1528906212.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:12.524Z,1528906212.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:12.910Z,1528906212.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:12.928Z,1528906212.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:13.310Z,1528906213.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:13.332Z,1528906213.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:13.711Z,1528906213.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:13.736Z,1528906213.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:14.102Z,1528906214.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:14.119Z,1528906214.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:14.499Z,1528906214.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:14.521Z,1528906214.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:14.899Z,1528906214.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:14.916Z,1528906214.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:15.301Z,1528906215.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:15.319Z,1528906215.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:15.710Z,1528906215.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:15.728Z,1528906215.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:16.111Z,1528906216.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:16.129Z,1528906216.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:16.511Z,1528906216.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:16.528Z,1528906216.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:16.902Z,1528906216.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:16.920Z,1528906216.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:17.306Z,1528906217.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:17.324Z,1528906217.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:17.702Z,1528906217.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:17.720Z,1528906217.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:18.100Z,1528906218.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:18.126Z,1528906218.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:18.499Z,1528906218.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:18.524Z,1528906218.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:18.913Z,1528906218.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:18.936Z,1528906218.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:19.315Z,1528906219.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:19.333Z,1528906219.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:19.714Z,1528906219.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:19.758Z,1528906219.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:20.095Z,1528906220.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:20.123Z,1528906220.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:20.495Z,1528906220.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:20.523Z,1528906220.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:20.896Z,1528906220.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:20.932Z,1528906220.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:21.295Z,1528906221.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:21.322Z,1528906221.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:21.716Z,1528906221.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:21.734Z,1528906221.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:22.115Z,1528906222.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:22.133Z,1528906222.133 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:22.133Z,1528906222.133 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 254
2018-06-13T16:10:22.133Z,1528906222.133 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:10:22.135Z,1528906222.135 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:22.135Z,1528906222.135 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 254
2018-06-13T16:10:22.135Z,1528906222.135 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:10:22.137Z,1528906222.137 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:22.137Z,1528906222.137 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 254
2018-06-13T16:10:22.137Z,1528906222.137 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:10:22.213Z,1528906222.213 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:10:22.213Z,1528906222.213 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:10:22.213Z,1528906222.213 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:10:22.515Z,1528906222.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:22.611Z,1528906222.611 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:10:22.611Z,1528906222.611 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 254
2018-06-13T16:10:22.611Z,1528906222.611 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:10:22.611Z,1528906222.611 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 254
2018-06-13T16:10:22.612Z,1528906222.612 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:10:22.612Z,1528906222.612 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 254
2018-06-13T16:10:22.891Z,1528906222.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:22.926Z,1528906222.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:10:22.926Z,1528906222.926 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:10:22.927Z,1528906222.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:10:22.927Z,1528906222.927 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:10:22.927Z,1528906222.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:10:22.928Z,1528906222.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:10:22.928Z,1528906222.928 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:10:22.928Z,1528906222.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:10:22.929Z,1528906222.929 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:10:23.292Z,1528906223.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:23.333Z,1528906223.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:10:23.334Z,1528906223.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:23.696Z,1528906223.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:23.735Z,1528906223.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:10:23.736Z,1528906223.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:24.095Z,1528906224.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:24.129Z,1528906224.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:10:24.130Z,1528906224.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:24.495Z,1528906224.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:24.542Z,1528906224.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:10:24.543Z,1528906224.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:24.905Z,1528906224.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:24.939Z,1528906224.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:10:24.940Z,1528906224.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:25.313Z,1528906225.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:25.348Z,1528906225.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:10:25.349Z,1528906225.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:25.710Z,1528906225.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:25.740Z,1528906225.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:10:25.740Z,1528906225.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:26.092Z,1528906226.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:26.109Z,1528906226.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:10:26.110Z,1528906226.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:26.495Z,1528906226.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:26.530Z,1528906226.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:10:26.530Z,1528906226.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:26.899Z,1528906226.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:26.923Z,1528906226.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:10:26.924Z,1528906226.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:27.294Z,1528906227.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:27.312Z,1528906227.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:10:27.313Z,1528906227.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:27.710Z,1528906227.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:27.743Z,1528906227.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:10:27.744Z,1528906227.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:28.110Z,1528906228.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:28.153Z,1528906228.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:10:28.154Z,1528906228.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:28.510Z,1528906228.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:28.528Z,1528906228.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:10:28.549Z,1528906228.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:28.898Z,1528906228.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:28.924Z,1528906228.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:10:28.925Z,1528906228.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:29.301Z,1528906229.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:29.319Z,1528906229.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:10:29.320Z,1528906229.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:29.695Z,1528906229.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:29.718Z,1528906229.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:10:29.719Z,1528906229.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:30.100Z,1528906230.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:30.120Z,1528906230.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:10:30.121Z,1528906230.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:30.500Z,1528906230.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:30.519Z,1528906230.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:10:30.520Z,1528906230.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:30.902Z,1528906230.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:30.924Z,1528906230.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:10:30.925Z,1528906230.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:31.309Z,1528906231.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:31.327Z,1528906231.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:10:31.327Z,1528906231.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:31.709Z,1528906231.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:31.727Z,1528906231.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:10:31.728Z,1528906231.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:32.094Z,1528906232.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:32.128Z,1528906232.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:10:32.129Z,1528906232.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:32.501Z,1528906232.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:32.519Z,1528906232.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:10:32.520Z,1528906232.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:32.894Z,1528906232.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:32.923Z,1528906232.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:10:32.924Z,1528906232.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:33.295Z,1528906233.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:33.318Z,1528906233.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:10:33.319Z,1528906233.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:33.710Z,1528906233.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:33.727Z,1528906233.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:10:33.728Z,1528906233.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:34.109Z,1528906234.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:34.139Z,1528906234.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:10:34.140Z,1528906234.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:34.506Z,1528906234.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:34.528Z,1528906234.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:10:34.529Z,1528906234.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:34.899Z,1528906234.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:34.921Z,1528906234.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:10:34.922Z,1528906234.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:35.303Z,1528906235.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:35.321Z,1528906235.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:10:35.322Z,1528906235.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:35.691Z,1528906235.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:35.720Z,1528906235.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:10:35.725Z,1528906235.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:36.096Z,1528906236.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:36.136Z,1528906236.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:10:36.137Z,1528906236.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:36.495Z,1528906236.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:36.524Z,1528906236.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:10:36.525Z,1528906236.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:36.908Z,1528906236.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:36.925Z,1528906236.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:10:36.926Z,1528906236.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:37.316Z,1528906237.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:37.333Z,1528906237.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:10:37.334Z,1528906237.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:37.716Z,1528906237.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:37.734Z,1528906237.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:10:37.735Z,1528906237.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:38.091Z,1528906238.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:38.127Z,1528906238.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:10:38.128Z,1528906238.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:38.499Z,1528906238.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:38.534Z,1528906238.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:10:38.535Z,1528906238.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:38.900Z,1528906238.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:38.932Z,1528906238.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:10:38.933Z,1528906238.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:42.015Z,1528906242.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:42.032Z,1528906242.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T16:10:42.033Z,1528906242.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:42.167Z,1528906242.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:42.228Z,1528906242.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:42.564Z,1528906242.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:42.582Z,1528906242.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:42.962Z,1528906242.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:42.984Z,1528906242.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:43.343Z,1528906243.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:43.376Z,1528906243.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:43.743Z,1528906243.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:43.784Z,1528906243.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:44.148Z,1528906244.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:44.175Z,1528906244.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:44.543Z,1528906244.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:44.575Z,1528906244.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:44.964Z,1528906244.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:44.982Z,1528906244.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:45.363Z,1528906245.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:45.382Z,1528906245.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:45.758Z,1528906245.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:45.787Z,1528906245.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:46.144Z,1528906246.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:46.174Z,1528906246.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:46.543Z,1528906246.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:46.561Z,1528906246.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:46.943Z,1528906246.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:46.960Z,1528906246.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:47.346Z,1528906247.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:47.376Z,1528906247.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:47.757Z,1528906247.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:47.791Z,1528906247.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:48.158Z,1528906248.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:48.196Z,1528906248.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:48.557Z,1528906248.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:48.594Z,1528906248.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:48.942Z,1528906248.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:48.960Z,1528906248.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:49.346Z,1528906249.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:49.364Z,1528906249.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:49.746Z,1528906249.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:49.764Z,1528906249.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:50.143Z,1528906250.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:50.169Z,1528906250.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:50.546Z,1528906250.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:50.564Z,1528906250.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:50.962Z,1528906250.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:50.995Z,1528906250.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:51.357Z,1528906251.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:51.391Z,1528906251.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:51.757Z,1528906251.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:51.775Z,1528906251.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:52.149Z,1528906252.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:52.167Z,1528906252.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:52.543Z,1528906252.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:52.566Z,1528906252.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:52.949Z,1528906252.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:52.966Z,1528906252.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:53.350Z,1528906253.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:53.368Z,1528906253.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:53.750Z,1528906253.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:53.776Z,1528906253.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:54.157Z,1528906254.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:54.175Z,1528906254.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:54.557Z,1528906254.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:54.575Z,1528906254.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:54.943Z,1528906254.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:54.966Z,1528906254.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:55.348Z,1528906255.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:55.372Z,1528906255.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:55.750Z,1528906255.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:55.776Z,1528906255.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:56.143Z,1528906256.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:56.167Z,1528906256.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:56.548Z,1528906256.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:56.566Z,1528906256.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:56.954Z,1528906256.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:56.973Z,1528906256.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:57.354Z,1528906257.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:57.376Z,1528906257.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:57.755Z,1528906257.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:57.780Z,1528906257.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:58.150Z,1528906258.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:58.168Z,1528906258.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:58.543Z,1528906258.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:58.567Z,1528906258.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:58.947Z,1528906258.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:58.979Z,1528906258.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:59.347Z,1528906259.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:59.380Z,1528906259.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:10:59.754Z,1528906259.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:10:59.773Z,1528906259.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:00.158Z,1528906260.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:00.180Z,1528906260.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:00.560Z,1528906260.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:00.584Z,1528906260.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:00.949Z,1528906260.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:00.967Z,1528906260.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:01.353Z,1528906261.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:01.371Z,1528906261.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:01.751Z,1528906261.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:01.769Z,1528906261.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:02.147Z,1528906262.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:02.164Z,1528906262.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:02.550Z,1528906262.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:02.568Z,1528906262.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:02.959Z,1528906262.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:02.994Z,1528906262.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:03.358Z,1528906263.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:03.395Z,1528906263.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:03.759Z,1528906263.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:03.776Z,1528906263.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:04.150Z,1528906264.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:04.168Z,1528906264.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:04.543Z,1528906264.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:04.581Z,1528906264.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:04.947Z,1528906264.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:04.971Z,1528906264.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:05.347Z,1528906265.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:05.373Z,1528906265.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:05.759Z,1528906265.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:05.777Z,1528906265.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:06.158Z,1528906266.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:06.180Z,1528906266.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:06.559Z,1528906266.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:06.584Z,1528906266.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:06.949Z,1528906266.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:06.967Z,1528906266.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:07.350Z,1528906267.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:07.367Z,1528906267.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:07.750Z,1528906267.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:07.768Z,1528906267.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:08.143Z,1528906268.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:08.168Z,1528906268.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:08.549Z,1528906268.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:08.567Z,1528906268.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:08.962Z,1528906268.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:09.006Z,1528906269.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:09.364Z,1528906269.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:09.382Z,1528906269.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:09.760Z,1528906269.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:09.784Z,1528906269.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:10.155Z,1528906270.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:10.173Z,1528906270.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:10.551Z,1528906270.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:10.568Z,1528906270.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:10.948Z,1528906270.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:10.982Z,1528906270.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:11.340Z,1528906271.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:11.376Z,1528906271.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:11.754Z,1528906271.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:11.779Z,1528906271.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:12.162Z,1528906272.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:12.187Z,1528906272.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:12.565Z,1528906272.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:12.583Z,1528906272.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:12.943Z,1528906272.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:12.980Z,1528906272.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:13.343Z,1528906273.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:13.381Z,1528906273.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:13.743Z,1528906273.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:13.788Z,1528906273.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:14.140Z,1528906274.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:14.167Z,1528906274.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:14.543Z,1528906274.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:14.580Z,1528906274.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:14.962Z,1528906274.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:14.992Z,1528906274.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:15.358Z,1528906275.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:15.392Z,1528906275.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:15.754Z,1528906275.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:15.781Z,1528906275.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:16.143Z,1528906276.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:16.178Z,1528906276.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:16.539Z,1528906276.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:16.564Z,1528906276.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:16.948Z,1528906276.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:16.966Z,1528906276.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:17.346Z,1528906277.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:17.364Z,1528906277.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:17.754Z,1528906277.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:17.772Z,1528906277.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:18.158Z,1528906278.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:18.176Z,1528906278.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:18.558Z,1528906278.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:18.576Z,1528906278.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:18.946Z,1528906278.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:18.963Z,1528906278.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:19.348Z,1528906279.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:19.372Z,1528906279.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:19.750Z,1528906279.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:19.768Z,1528906279.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:20.150Z,1528906280.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:20.168Z,1528906280.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:20.548Z,1528906280.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:20.566Z,1528906280.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:20.958Z,1528906280.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:20.976Z,1528906280.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:21.354Z,1528906281.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:21.376Z,1528906281.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:21.754Z,1528906281.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:21.776Z,1528906281.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:22.150Z,1528906282.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:22.168Z,1528906282.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:22.542Z,1528906282.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:22.574Z,1528906282.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:22.947Z,1528906282.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:22.979Z,1528906282.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:23.347Z,1528906283.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:23.377Z,1528906283.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:23.759Z,1528906283.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:23.777Z,1528906283.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:24.158Z,1528906284.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:24.180Z,1528906284.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:24.559Z,1528906284.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:24.576Z,1528906284.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:24.943Z,1528906284.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:24.966Z,1528906284.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:25.347Z,1528906285.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:25.378Z,1528906285.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:25.751Z,1528906285.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:25.769Z,1528906285.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:26.143Z,1528906286.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:26.167Z,1528906286.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:26.548Z,1528906286.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:26.566Z,1528906286.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:26.959Z,1528906286.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:26.977Z,1528906286.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:27.358Z,1528906287.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:27.380Z,1528906287.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:27.760Z,1528906287.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:27.778Z,1528906287.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:28.147Z,1528906288.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:28.181Z,1528906288.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:28.539Z,1528906288.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:28.575Z,1528906288.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:28.944Z,1528906288.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:28.971Z,1528906288.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:29.343Z,1528906289.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:29.372Z,1528906289.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:29.760Z,1528906289.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:29.778Z,1528906289.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:30.163Z,1528906290.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:30.188Z,1528906290.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:30.568Z,1528906290.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:30.592Z,1528906290.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:30.939Z,1528906290.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:30.975Z,1528906290.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:31.343Z,1528906291.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:31.370Z,1528906291.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:31.743Z,1528906291.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:31.773Z,1528906291.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:32.144Z,1528906292.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:32.171Z,1528906292.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:32.543Z,1528906292.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:32.571Z,1528906292.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:32.964Z,1528906292.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:32.982Z,1528906292.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:33.358Z,1528906293.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:33.389Z,1528906293.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:33.759Z,1528906293.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:33.777Z,1528906293.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:34.143Z,1528906294.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:34.178Z,1528906294.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:34.543Z,1528906294.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:34.580Z,1528906294.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:34.944Z,1528906294.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:34.984Z,1528906294.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:35.343Z,1528906295.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:35.381Z,1528906295.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:35.750Z,1528906295.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:35.785Z,1528906295.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:36.163Z,1528906296.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:36.181Z,1528906296.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:36.562Z,1528906296.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:36.592Z,1528906296.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:36.943Z,1528906296.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:36.981Z,1528906296.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:37.344Z,1528906297.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:37.377Z,1528906297.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:37.743Z,1528906297.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:37.762Z,1528906297.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:38.144Z,1528906298.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:38.168Z,1528906298.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:38.547Z,1528906298.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:38.572Z,1528906298.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:38.962Z,1528906298.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:38.996Z,1528906298.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:42.066Z,1528906302.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:42.103Z,1528906302.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:42.238Z,1528906302.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:42.272Z,1528906302.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:42.615Z,1528906302.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:42.653Z,1528906302.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:43.016Z,1528906303.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:43.051Z,1528906303.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:43.415Z,1528906303.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:43.433Z,1528906303.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:43.829Z,1528906303.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:43.857Z,1528906303.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:44.229Z,1528906304.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:44.256Z,1528906304.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:44.629Z,1528906304.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:44.656Z,1528906304.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:45.018Z,1528906305.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:45.036Z,1528906305.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:45.416Z,1528906305.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:45.434Z,1528906305.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:45.815Z,1528906305.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:45.833Z,1528906305.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:46.217Z,1528906306.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:46.235Z,1528906306.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:46.619Z,1528906306.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:46.636Z,1528906306.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:47.029Z,1528906307.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:47.063Z,1528906307.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:47.426Z,1528906307.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:47.471Z,1528906307.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:47.829Z,1528906307.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:47.847Z,1528906307.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:48.220Z,1528906308.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:48.252Z,1528906308.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:48.620Z,1528906308.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:48.651Z,1528906308.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:49.024Z,1528906309.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:49.041Z,1528906309.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:49.419Z,1528906309.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:49.453Z,1528906309.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:49.837Z,1528906309.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:49.860Z,1528906309.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:50.237Z,1528906310.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:50.255Z,1528906310.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:50.636Z,1528906310.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:50.660Z,1528906310.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:51.015Z,1528906311.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:51.054Z,1528906311.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:51.416Z,1528906311.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:51.444Z,1528906311.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:51.816Z,1528906311.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:51.852Z,1528906311.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:52.222Z,1528906312.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:52.248Z,1528906312.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:52.615Z,1528906312.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:52.652Z,1528906312.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:53.036Z,1528906313.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:53.054Z,1528906313.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:53.436Z,1528906313.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:53.455Z,1528906313.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:53.836Z,1528906313.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:53.861Z,1528906313.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:54.216Z,1528906314.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:54.252Z,1528906314.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:54.615Z,1528906314.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:54.644Z,1528906314.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:55.016Z,1528906315.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:55.044Z,1528906315.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:55.415Z,1528906315.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:55.450Z,1528906315.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:55.835Z,1528906315.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:55.859Z,1528906315.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:56.232Z,1528906316.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:56.251Z,1528906316.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:56.637Z,1528906316.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:56.655Z,1528906316.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:57.016Z,1528906317.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:57.048Z,1528906317.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:57.411Z,1528906317.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:57.441Z,1528906317.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:57.816Z,1528906317.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:57.850Z,1528906317.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:58.217Z,1528906318.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:58.259Z,1528906318.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:58.615Z,1528906318.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:58.633Z,1528906318.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:59.031Z,1528906319.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:59.056Z,1528906319.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:59.430Z,1528906319.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:59.458Z,1528906319.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:11:59.830Z,1528906319.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:11:59.857Z,1528906319.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:00.218Z,1528906320.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:00.249Z,1528906320.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:00.615Z,1528906320.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:00.633Z,1528906320.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:01.015Z,1528906321.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:01.042Z,1528906321.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:01.418Z,1528906321.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:01.440Z,1528906321.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:01.833Z,1528906321.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:01.868Z,1528906321.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:02.230Z,1528906322.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:02.247Z,1528906322.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:02.630Z,1528906322.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:02.647Z,1528906322.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:03.018Z,1528906323.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:03.036Z,1528906323.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:03.415Z,1528906323.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:03.446Z,1528906323.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:03.821Z,1528906323.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:03.839Z,1528906323.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:04.220Z,1528906324.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:04.249Z,1528906324.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:04.615Z,1528906324.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:04.639Z,1528906324.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:05.029Z,1528906325.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:05.047Z,1528906325.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:05.431Z,1528906325.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:05.448Z,1528906325.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:05.828Z,1528906325.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:05.846Z,1528906325.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:06.221Z,1528906326.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:06.247Z,1528906326.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:06.623Z,1528906326.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:06.640Z,1528906326.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:07.012Z,1528906327.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:07.042Z,1528906327.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:07.422Z,1528906327.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:07.440Z,1528906327.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:07.832Z,1528906327.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:07.851Z,1528906327.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:08.231Z,1528906328.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:08.249Z,1528906328.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:08.635Z,1528906328.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:08.653Z,1528906328.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:09.022Z,1528906329.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:09.040Z,1528906329.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:09.411Z,1528906329.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:09.447Z,1528906329.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:09.819Z,1528906329.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:09.853Z,1528906329.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:10.212Z,1528906330.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:10.241Z,1528906330.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:10.611Z,1528906330.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:10.646Z,1528906330.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:11.036Z,1528906331.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:11.053Z,1528906331.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:11.436Z,1528906331.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:11.453Z,1528906331.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:11.826Z,1528906331.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:11.849Z,1528906331.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:12.218Z,1528906332.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:12.244Z,1528906332.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:12.611Z,1528906332.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:12.649Z,1528906332.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:13.012Z,1528906333.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:13.038Z,1528906333.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:13.415Z,1528906333.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:13.449Z,1528906333.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:13.829Z,1528906333.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:13.858Z,1528906333.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:14.225Z,1528906334.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:14.263Z,1528906334.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:14.629Z,1528906334.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:14.657Z,1528906334.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:15.015Z,1528906335.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:15.033Z,1528906335.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:15.412Z,1528906335.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:15.430Z,1528906335.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:15.815Z,1528906335.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:15.833Z,1528906335.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:16.216Z,1528906336.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:16.234Z,1528906336.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:16.615Z,1528906336.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:16.634Z,1528906336.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:17.029Z,1528906337.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:17.063Z,1528906337.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:17.429Z,1528906337.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:17.465Z,1528906337.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:17.829Z,1528906337.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:17.864Z,1528906337.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:18.219Z,1528906338.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:18.237Z,1528906338.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:18.618Z,1528906338.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:18.636Z,1528906338.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:19.019Z,1528906339.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:19.037Z,1528906339.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:19.417Z,1528906339.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:19.440Z,1528906339.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:19.829Z,1528906339.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:19.867Z,1528906339.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:20.233Z,1528906340.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:20.259Z,1528906340.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:20.629Z,1528906340.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:20.662Z,1528906340.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:21.020Z,1528906341.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:21.054Z,1528906341.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:21.419Z,1528906341.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:21.437Z,1528906341.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:21.818Z,1528906341.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:21.840Z,1528906341.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:22.219Z,1528906342.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:22.238Z,1528906342.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:22.621Z,1528906342.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:22.639Z,1528906342.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:23.029Z,1528906343.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:23.047Z,1528906343.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:23.429Z,1528906343.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:23.470Z,1528906343.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:23.829Z,1528906343.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:23.847Z,1528906343.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:24.225Z,1528906344.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:24.248Z,1528906344.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:24.623Z,1528906344.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:24.640Z,1528906344.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:25.023Z,1528906345.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:25.041Z,1528906345.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:25.419Z,1528906345.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:25.451Z,1528906345.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:25.829Z,1528906345.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:25.847Z,1528906345.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:26.229Z,1528906346.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:26.247Z,1528906346.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:26.629Z,1528906346.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:26.647Z,1528906346.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:27.023Z,1528906347.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:27.052Z,1528906347.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:27.416Z,1528906347.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:27.447Z,1528906347.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:27.816Z,1528906347.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:27.847Z,1528906347.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:28.225Z,1528906348.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:28.243Z,1528906348.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:28.616Z,1528906348.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:28.644Z,1528906348.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:29.036Z,1528906349.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:29.054Z,1528906349.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:29.437Z,1528906349.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:29.455Z,1528906349.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:29.837Z,1528906349.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:29.855Z,1528906349.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:30.226Z,1528906350.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:30.244Z,1528906350.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:30.611Z,1528906350.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:30.641Z,1528906350.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:31.016Z,1528906351.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:31.043Z,1528906351.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:31.416Z,1528906351.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:31.443Z,1528906351.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:31.837Z,1528906351.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:31.860Z,1528906351.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:32.235Z,1528906352.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:32.254Z,1528906352.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:32.635Z,1528906352.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:32.653Z,1528906352.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:33.016Z,1528906353.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:33.044Z,1528906353.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:33.416Z,1528906353.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:33.443Z,1528906353.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:33.815Z,1528906353.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:33.844Z,1528906353.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:34.225Z,1528906354.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:34.242Z,1528906354.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:34.615Z,1528906354.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:34.643Z,1528906354.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:35.035Z,1528906355.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:35.052Z,1528906355.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:35.436Z,1528906355.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:35.460Z,1528906355.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:35.835Z,1528906355.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:35.852Z,1528906355.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:36.222Z,1528906356.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:36.252Z,1528906356.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:36.616Z,1528906356.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:36.652Z,1528906356.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:37.017Z,1528906357.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:37.045Z,1528906357.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:37.416Z,1528906357.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:37.452Z,1528906357.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:37.838Z,1528906357.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:37.855Z,1528906357.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:38.230Z,1528906358.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:38.254Z,1528906358.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:38.638Z,1528906358.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:38.655Z,1528906358.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:39.015Z,1528906359.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:39.053Z,1528906359.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:39.416Z,1528906359.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:39.447Z,1528906359.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:39.815Z,1528906359.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:39.848Z,1528906359.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:40.216Z,1528906360.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:40.247Z,1528906360.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:43.342Z,1528906363.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:43.364Z,1528906363.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:43.503Z,1528906363.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:43.544Z,1528906363.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:43.900Z,1528906363.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:43.918Z,1528906363.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:44.297Z,1528906364.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:44.315Z,1528906364.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:44.683Z,1528906364.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:44.708Z,1528906364.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:45.089Z,1528906365.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:45.107Z,1528906365.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:45.479Z,1528906365.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:45.507Z,1528906365.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:45.896Z,1528906365.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:45.914Z,1528906365.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:46.300Z,1528906366.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:46.324Z,1528906366.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:46.690Z,1528906366.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:46.722Z,1528906366.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:47.079Z,1528906367.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:47.120Z,1528906367.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:47.479Z,1528906367.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:47.518Z,1528906367.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:47.875Z,1528906367.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:47.912Z,1528906367.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:48.279Z,1528906368.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:48.306Z,1528906368.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:48.679Z,1528906368.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:48.708Z,1528906368.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:49.089Z,1528906369.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:49.112Z,1528906369.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:49.500Z,1528906369.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:49.517Z,1528906369.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:49.900Z,1528906369.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:49.918Z,1528906369.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:50.279Z,1528906370.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:50.306Z,1528906370.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:50.679Z,1528906370.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:50.706Z,1528906370.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:51.080Z,1528906371.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:51.109Z,1528906371.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:51.479Z,1528906371.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:51.508Z,1528906371.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:51.895Z,1528906371.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:51.913Z,1528906371.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:52.300Z,1528906372.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:52.318Z,1528906372.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:52.689Z,1528906372.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:52.712Z,1528906372.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:53.079Z,1528906373.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:53.106Z,1528906373.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:53.479Z,1528906373.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:53.508Z,1528906373.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:53.875Z,1528906373.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:53.905Z,1528906373.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:54.281Z,1528906374.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:54.309Z,1528906374.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:54.679Z,1528906374.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:54.717Z,1528906374.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:55.090Z,1528906375.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:55.124Z,1528906375.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:55.500Z,1528906375.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:55.518Z,1528906375.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:55.900Z,1528906375.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:55.918Z,1528906375.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:56.275Z,1528906376.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:56.306Z,1528906376.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:56.679Z,1528906376.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:56.696Z,1528906376.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:57.080Z,1528906377.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:57.098Z,1528906377.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:57.483Z,1528906377.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:57.501Z,1528906377.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:57.893Z,1528906377.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:57.927Z,1528906377.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:58.294Z,1528906378.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:58.335Z,1528906378.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:58.693Z,1528906378.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:58.711Z,1528906378.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:59.084Z,1528906379.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:59.102Z,1528906379.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:59.484Z,1528906379.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:59.502Z,1528906379.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:12:59.878Z,1528906379.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:12:59.908Z,1528906379.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:00.284Z,1528906380.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:00.302Z,1528906380.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:00.685Z,1528906380.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:00.703Z,1528906380.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:01.090Z,1528906381.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:01.108Z,1528906381.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:01.494Z,1528906381.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:01.512Z,1528906381.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:01.893Z,1528906381.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:01.911Z,1528906381.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:02.279Z,1528906382.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:02.301Z,1528906382.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:02.684Z,1528906382.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:02.708Z,1528906382.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:03.084Z,1528906383.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:03.111Z,1528906383.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:03.485Z,1528906383.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:03.503Z,1528906383.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:03.890Z,1528906383.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:03.912Z,1528906383.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:04.293Z,1528906384.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:04.311Z,1528906384.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:04.690Z,1528906384.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:04.708Z,1528906384.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:05.083Z,1528906385.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:05.106Z,1528906385.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:05.486Z,1528906385.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:05.504Z,1528906385.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:05.886Z,1528906385.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:05.908Z,1528906385.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:06.286Z,1528906386.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:06.303Z,1528906386.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:06.686Z,1528906386.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:06.704Z,1528906386.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:07.090Z,1528906387.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:07.108Z,1528906387.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:07.493Z,1528906387.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:07.511Z,1528906387.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:07.894Z,1528906387.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:07.912Z,1528906387.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:08.286Z,1528906388.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:08.303Z,1528906388.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:08.683Z,1528906388.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:08.714Z,1528906388.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:09.084Z,1528906389.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:09.115Z,1528906389.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:09.479Z,1528906389.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:09.502Z,1528906389.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:09.895Z,1528906389.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:09.914Z,1528906389.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:10.295Z,1528906390.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:10.320Z,1528906390.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:10.695Z,1528906390.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:10.713Z,1528906390.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:11.078Z,1528906391.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:11.110Z,1528906391.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:11.483Z,1528906391.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:11.517Z,1528906391.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:11.876Z,1528906391.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:11.910Z,1528906391.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:12.280Z,1528906392.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:12.315Z,1528906392.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:12.680Z,1528906392.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:12.710Z,1528906392.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:13.090Z,1528906393.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:13.117Z,1528906393.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:13.500Z,1528906393.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:13.518Z,1528906393.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:13.901Z,1528906393.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:13.919Z,1528906393.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:14.275Z,1528906394.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:14.306Z,1528906394.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:14.679Z,1528906394.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:14.706Z,1528906394.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:15.080Z,1528906395.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:15.099Z,1528906395.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:15.483Z,1528906395.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:15.501Z,1528906395.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:15.893Z,1528906395.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:15.926Z,1528906395.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:16.292Z,1528906396.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:16.328Z,1528906396.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:16.693Z,1528906396.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:16.728Z,1528906396.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:17.082Z,1528906397.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:17.100Z,1528906397.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:17.483Z,1528906397.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:17.501Z,1528906397.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:17.882Z,1528906397.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:17.900Z,1528906397.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:18.283Z,1528906398.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:18.308Z,1528906398.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:18.682Z,1528906398.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:18.700Z,1528906398.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:19.086Z,1528906399.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:19.108Z,1528906399.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:19.494Z,1528906399.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:19.512Z,1528906399.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:19.893Z,1528906399.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:19.911Z,1528906399.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:20.286Z,1528906400.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:20.304Z,1528906400.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:20.684Z,1528906400.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:20.702Z,1528906400.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:21.084Z,1528906401.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:21.118Z,1528906401.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:21.479Z,1528906401.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:21.504Z,1528906401.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:21.890Z,1528906401.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:21.912Z,1528906401.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:22.293Z,1528906402.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:22.311Z,1528906402.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:22.697Z,1528906402.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:22.715Z,1528906402.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:23.086Z,1528906403.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:23.103Z,1528906403.103 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:23.103Z,1528906403.103 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 255
2018-06-13T16:13:23.103Z,1528906403.103 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:13:23.105Z,1528906403.105 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:23.106Z,1528906403.106 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 255
2018-06-13T16:13:23.106Z,1528906403.106 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:13:23.107Z,1528906403.107 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:23.107Z,1528906403.107 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 255
2018-06-13T16:13:23.107Z,1528906403.107 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:13:23.181Z,1528906403.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:13:23.181Z,1528906403.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:13:23.182Z,1528906403.182 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:13:23.483Z,1528906403.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:23.597Z,1528906403.597 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:13:23.597Z,1528906403.597 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 255
2018-06-13T16:13:23.598Z,1528906403.598 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:13:23.598Z,1528906403.598 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 255
2018-06-13T16:13:23.598Z,1528906403.598 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:13:23.598Z,1528906403.598 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 255
2018-06-13T16:13:23.876Z,1528906403.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:23.904Z,1528906403.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:13:23.905Z,1528906403.905 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:13:23.905Z,1528906403.905 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:13:23.905Z,1528906403.905 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:13:23.906Z,1528906403.906 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:13:23.906Z,1528906403.906 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:13:23.907Z,1528906403.907 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:13:23.907Z,1528906403.907 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:13:23.907Z,1528906403.907 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:13:24.281Z,1528906404.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:24.317Z,1528906404.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:13:24.318Z,1528906404.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:24.680Z,1528906404.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:24.714Z,1528906404.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:13:24.715Z,1528906404.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:25.097Z,1528906405.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:25.115Z,1528906405.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:13:25.116Z,1528906405.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:25.498Z,1528906405.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:25.527Z,1528906405.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:13:25.528Z,1528906405.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:25.894Z,1528906405.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:25.936Z,1528906405.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:13:25.941Z,1528906405.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:26.278Z,1528906406.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:26.297Z,1528906406.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:13:26.298Z,1528906406.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:26.682Z,1528906406.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:26.700Z,1528906406.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:13:26.701Z,1528906406.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:27.083Z,1528906407.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:27.102Z,1528906407.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:13:27.102Z,1528906407.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:27.482Z,1528906407.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:27.499Z,1528906407.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:13:27.500Z,1528906407.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:27.893Z,1528906407.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:27.927Z,1528906407.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:13:27.928Z,1528906407.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:28.294Z,1528906408.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:28.312Z,1528906408.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:13:28.329Z,1528906408.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:28.686Z,1528906408.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:28.708Z,1528906408.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:13:28.709Z,1528906408.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:29.084Z,1528906409.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:29.114Z,1528906409.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:13:29.115Z,1528906409.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:29.485Z,1528906409.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:29.502Z,1528906409.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:13:29.503Z,1528906409.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:29.890Z,1528906409.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:29.907Z,1528906409.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:13:29.908Z,1528906409.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:30.293Z,1528906410.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:30.310Z,1528906410.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:13:30.311Z,1528906410.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:30.693Z,1528906410.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:30.711Z,1528906410.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:13:30.712Z,1528906410.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:31.079Z,1528906411.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:31.103Z,1528906411.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:13:31.104Z,1528906411.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:31.483Z,1528906411.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:31.507Z,1528906411.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:13:31.508Z,1528906411.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:31.893Z,1528906411.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:31.911Z,1528906411.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:13:31.912Z,1528906411.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:32.293Z,1528906412.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:32.311Z,1528906412.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:13:32.312Z,1528906412.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:32.690Z,1528906412.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:32.707Z,1528906412.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:13:32.708Z,1528906412.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:33.079Z,1528906413.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:33.113Z,1528906413.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:13:33.114Z,1528906413.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:33.479Z,1528906413.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:33.502Z,1528906413.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:13:33.503Z,1528906413.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:33.893Z,1528906413.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:33.911Z,1528906413.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:13:33.912Z,1528906413.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:34.294Z,1528906414.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:34.312Z,1528906414.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:13:34.313Z,1528906414.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:34.694Z,1528906414.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:34.712Z,1528906414.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:13:34.713Z,1528906414.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:35.081Z,1528906415.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:35.105Z,1528906415.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:13:35.106Z,1528906415.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:35.483Z,1528906415.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:35.513Z,1528906415.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:13:35.514Z,1528906415.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:35.893Z,1528906415.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:35.910Z,1528906415.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:13:35.911Z,1528906415.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:36.299Z,1528906416.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:36.316Z,1528906416.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:13:36.317Z,1528906416.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:36.700Z,1528906416.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:36.717Z,1528906416.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:13:36.718Z,1528906416.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:37.080Z,1528906417.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:37.106Z,1528906417.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:13:37.107Z,1528906417.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:37.479Z,1528906417.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:37.514Z,1528906417.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:13:37.515Z,1528906417.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:37.899Z,1528906417.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:37.918Z,1528906417.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:13:37.919Z,1528906417.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:38.296Z,1528906418.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:38.313Z,1528906418.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:13:38.314Z,1528906418.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:38.702Z,1528906418.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:38.724Z,1528906418.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:13:38.725Z,1528906418.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:39.091Z,1528906419.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:39.108Z,1528906419.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:13:39.109Z,1528906419.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:42.263Z,1528906422.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:42.301Z,1528906422.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:13:42.302Z,1528906422.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:42.438Z,1528906422.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:42.471Z,1528906422.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T16:13:42.472Z,1528906422.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:42.840Z,1528906422.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:42.864Z,1528906422.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T16:13:42.866Z,1528906422.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:43.236Z,1528906423.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:43.260Z,1528906423.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:43.615Z,1528906423.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:43.648Z,1528906423.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:44.015Z,1528906424.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:44.045Z,1528906424.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:44.412Z,1528906424.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:44.429Z,1528906424.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:44.815Z,1528906424.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:44.849Z,1528906424.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:45.230Z,1528906425.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:45.263Z,1528906425.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:45.629Z,1528906425.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:45.662Z,1528906425.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:46.029Z,1528906426.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:46.062Z,1528906426.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:46.418Z,1528906426.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:46.436Z,1528906426.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:46.818Z,1528906426.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:46.836Z,1528906426.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:47.218Z,1528906427.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:47.241Z,1528906427.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:47.618Z,1528906427.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:47.636Z,1528906427.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:48.029Z,1528906428.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:48.063Z,1528906428.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:48.429Z,1528906428.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:48.447Z,1528906428.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:48.829Z,1528906428.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:48.847Z,1528906428.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:49.219Z,1528906429.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:49.236Z,1528906429.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:49.619Z,1528906429.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:49.641Z,1528906429.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:50.022Z,1528906430.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:50.039Z,1528906430.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:50.415Z,1528906430.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:50.447Z,1528906430.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:50.819Z,1528906430.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:50.849Z,1528906430.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:51.235Z,1528906431.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:51.254Z,1528906431.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:51.634Z,1528906431.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:51.656Z,1528906431.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:52.031Z,1528906432.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:52.050Z,1528906432.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:52.422Z,1528906432.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:52.444Z,1528906432.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:52.812Z,1528906432.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:52.847Z,1528906432.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:53.211Z,1528906433.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:53.243Z,1528906433.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:53.619Z,1528906433.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:53.644Z,1528906433.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:54.031Z,1528906434.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:54.049Z,1528906434.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:54.433Z,1528906434.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:54.451Z,1528906434.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:54.834Z,1528906434.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:54.861Z,1528906434.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:55.211Z,1528906435.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:55.244Z,1528906435.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:55.615Z,1528906435.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:55.653Z,1528906435.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:56.015Z,1528906436.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:56.054Z,1528906436.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:56.415Z,1528906436.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:56.447Z,1528906436.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:56.815Z,1528906436.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:56.856Z,1528906436.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:57.236Z,1528906437.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:57.254Z,1528906437.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:57.634Z,1528906437.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:57.652Z,1528906437.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:58.021Z,1528906438.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:58.055Z,1528906438.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:58.415Z,1528906438.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:58.450Z,1528906438.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:58.815Z,1528906438.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:58.848Z,1528906438.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:59.215Z,1528906439.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:59.249Z,1528906439.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:13:59.616Z,1528906439.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:13:59.634Z,1528906439.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:00.025Z,1528906440.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:00.059Z,1528906440.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:00.433Z,1528906440.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:00.466Z,1528906440.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:00.829Z,1528906440.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:00.863Z,1528906440.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:01.268Z,1528906441.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:01.346Z,1528906441.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:01.618Z,1528906441.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:01.637Z,1528906441.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:02.017Z,1528906442.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:02.035Z,1528906442.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:02.416Z,1528906442.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:02.440Z,1528906442.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:02.820Z,1528906442.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:02.838Z,1528906442.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:03.229Z,1528906443.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:03.247Z,1528906443.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:03.629Z,1528906443.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:03.648Z,1528906443.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:04.025Z,1528906444.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:04.043Z,1528906444.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:04.422Z,1528906444.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:04.440Z,1528906444.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:04.815Z,1528906444.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:04.846Z,1528906444.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:05.222Z,1528906445.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:05.239Z,1528906445.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:05.621Z,1528906445.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:05.644Z,1528906445.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:06.026Z,1528906446.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:06.044Z,1528906446.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:06.430Z,1528906446.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:06.468Z,1528906446.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:06.830Z,1528906446.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:06.848Z,1528906446.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:07.215Z,1528906447.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:07.246Z,1528906447.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:07.619Z,1528906447.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:07.641Z,1528906447.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:08.022Z,1528906448.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:08.040Z,1528906448.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:08.422Z,1528906448.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:08.441Z,1528906448.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:08.819Z,1528906448.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:08.842Z,1528906448.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:09.233Z,1528906449.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:09.252Z,1528906449.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:09.629Z,1528906449.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:09.647Z,1528906449.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:10.026Z,1528906450.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:10.044Z,1528906450.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:10.422Z,1528906450.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:10.440Z,1528906450.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:10.821Z,1528906450.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:10.844Z,1528906450.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:11.220Z,1528906451.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:11.256Z,1528906451.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:11.622Z,1528906451.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:11.644Z,1528906451.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:12.027Z,1528906452.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:12.045Z,1528906452.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:12.429Z,1528906452.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:12.447Z,1528906452.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:12.831Z,1528906452.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:12.856Z,1528906452.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:13.218Z,1528906453.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:13.248Z,1528906453.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:13.622Z,1528906453.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:13.644Z,1528906453.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:14.022Z,1528906454.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:14.045Z,1528906454.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:14.412Z,1528906454.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:14.442Z,1528906454.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:14.823Z,1528906454.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:14.840Z,1528906454.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:15.236Z,1528906455.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:15.255Z,1528906455.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:15.634Z,1528906455.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:15.656Z,1528906455.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:16.036Z,1528906456.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:16.060Z,1528906456.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:16.423Z,1528906456.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:16.448Z,1528906456.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:16.811Z,1528906456.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:16.839Z,1528906456.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:17.222Z,1528906457.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:17.240Z,1528906457.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:17.611Z,1528906457.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:17.640Z,1528906457.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:18.028Z,1528906458.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:18.047Z,1528906458.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:18.435Z,1528906458.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:18.452Z,1528906458.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:18.832Z,1528906458.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:18.851Z,1528906458.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:19.217Z,1528906459.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:19.242Z,1528906459.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:19.620Z,1528906459.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:19.638Z,1528906459.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:20.011Z,1528906460.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:20.039Z,1528906460.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:20.412Z,1528906460.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:20.447Z,1528906460.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:20.822Z,1528906460.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:20.844Z,1528906460.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:21.195Z,1528906461.195 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T16:14:21.195Z,1528906461.195 [NAL9602] Data Fault, FailCount= 5
2018-06-13T16:14:21.195Z,1528906461.195 [NAL9602](ERROR): Data Fault
2018-06-13T16:14:21.211Z,1528906461.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:21.264Z,1528906461.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:21.357Z,1528906461.357 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T16:14:21.357Z,1528906461.357 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T16:14:21.594Z,1528906461.594 [NAL9602](INFO): Powering down
2018-06-13T16:14:21.612Z,1528906461.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:21.645Z,1528906461.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:21.723Z,1528906461.723 [CBIT](INFO): Critical error at 20180613T161421
2018-06-13T16:14:22.014Z,1528906462.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:22.051Z,1528906462.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:22.414Z,1528906462.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:22.453Z,1528906462.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:22.810Z,1528906462.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:22.851Z,1528906462.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:23.214Z,1528906463.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:23.250Z,1528906463.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:23.614Z,1528906463.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:23.653Z,1528906463.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:24.010Z,1528906464.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:24.028Z,1528906464.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:24.414Z,1528906464.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:24.452Z,1528906464.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:24.814Z,1528906464.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:24.832Z,1528906464.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:25.210Z,1528906465.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:25.300Z,1528906465.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:25.614Z,1528906465.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:25.636Z,1528906465.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:26.018Z,1528906466.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:26.035Z,1528906466.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:26.418Z,1528906466.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:26.436Z,1528906466.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:26.818Z,1528906466.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:26.836Z,1528906466.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:27.213Z,1528906467.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:27.230Z,1528906467.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:27.614Z,1528906467.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:27.631Z,1528906467.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:28.017Z,1528906468.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:28.035Z,1528906468.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:28.417Z,1528906468.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:28.434Z,1528906468.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:28.817Z,1528906468.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:28.835Z,1528906468.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:29.217Z,1528906469.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:29.235Z,1528906469.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:29.613Z,1528906469.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:29.631Z,1528906469.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:30.017Z,1528906470.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:30.035Z,1528906470.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:30.418Z,1528906470.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:30.435Z,1528906470.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:30.813Z,1528906470.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:30.830Z,1528906470.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:31.218Z,1528906471.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:31.236Z,1528906471.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:31.617Z,1528906471.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:31.640Z,1528906471.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:32.013Z,1528906472.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:32.030Z,1528906472.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:32.417Z,1528906472.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:32.435Z,1528906472.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:32.817Z,1528906472.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:32.840Z,1528906472.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:33.213Z,1528906473.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:33.230Z,1528906473.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:33.617Z,1528906473.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:33.635Z,1528906473.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:34.017Z,1528906474.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:34.035Z,1528906474.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:34.415Z,1528906474.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:34.433Z,1528906474.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:34.817Z,1528906474.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:34.835Z,1528906474.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:35.218Z,1528906475.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:35.235Z,1528906475.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:35.615Z,1528906475.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:35.632Z,1528906475.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:36.017Z,1528906476.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:36.035Z,1528906476.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:36.417Z,1528906476.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:36.435Z,1528906476.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:36.817Z,1528906476.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:36.834Z,1528906476.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:37.221Z,1528906477.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:37.239Z,1528906477.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:37.617Z,1528906477.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:37.635Z,1528906477.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:38.015Z,1528906478.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:38.033Z,1528906478.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:38.417Z,1528906478.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:38.435Z,1528906478.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:38.821Z,1528906478.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:38.844Z,1528906478.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:39.222Z,1528906479.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:39.239Z,1528906479.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:42.328Z,1528906482.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:42.362Z,1528906482.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:42.366Z,1528906482.366 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T16:09:41.0Z
2018-06-13T16:14:42.366Z,1528906482.366 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T16:14:42.366Z,1528906482.366 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T16:14:42.478Z,1528906482.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:42.521Z,1528906482.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:43.632Z,1528906483.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:43.673Z,1528906483.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:43.780Z,1528906483.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:43.823Z,1528906483.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:44.186Z,1528906484.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:44.219Z,1528906484.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:44.582Z,1528906484.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:44.620Z,1528906484.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:44.980Z,1528906484.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:44.998Z,1528906484.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:45.386Z,1528906485.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:45.404Z,1528906485.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:45.787Z,1528906485.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:45.805Z,1528906485.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:46.180Z,1528906486.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:46.198Z,1528906486.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:46.586Z,1528906486.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:46.605Z,1528906486.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:46.982Z,1528906486.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:47.000Z,1528906487.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:47.385Z,1528906487.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:47.404Z,1528906487.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:47.787Z,1528906487.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:47.805Z,1528906487.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:50.998Z,1528906490.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:51.031Z,1528906491.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:51.125Z,1528906491.125 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0296.lzma
2018-06-13T16:14:51.147Z,1528906491.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:51.178Z,1528906491.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:51.551Z,1528906491.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:51.584Z,1528906491.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:51.928Z,1528906491.928 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0296.lzma.bak
2018-06-13T16:14:51.928Z,1528906491.928 [DataOverHttps](INFO): SBD MOMSN=8329518
2018-06-13T16:14:51.954Z,1528906491.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:52.003Z,1528906492.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:53.866Z,1528906493.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:53.892Z,1528906493.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:54.003Z,1528906494.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:54.041Z,1528906494.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:57.203Z,1528906497.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:57.247Z,1528906497.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:57.358Z,1528906497.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:57.399Z,1528906497.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:57.758Z,1528906497.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:57.795Z,1528906497.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:58.162Z,1528906498.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:58.196Z,1528906498.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:58.558Z,1528906498.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:58.596Z,1528906498.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:58.959Z,1528906498.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:58.993Z,1528906498.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:59.359Z,1528906499.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:59.376Z,1528906499.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:14:59.751Z,1528906499.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:14:59.770Z,1528906499.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:00.160Z,1528906500.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:00.178Z,1528906500.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:00.558Z,1528906500.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:00.576Z,1528906500.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:00.954Z,1528906500.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:00.972Z,1528906500.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:01.357Z,1528906501.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:01.375Z,1528906501.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:01.754Z,1528906501.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:01.830Z,1528906501.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:02.154Z,1528906502.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:02.191Z,1528906502.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:02.554Z,1528906502.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:02.681Z,1528906502.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:06.076Z,1528906506.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:06.094Z,1528906506.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:06.182Z,1528906506.182 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0297.lzma
2018-06-13T16:15:06.210Z,1528906506.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:06.312Z,1528906506.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:06.602Z,1528906506.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:06.620Z,1528906506.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:06.974Z,1528906506.974 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0297.lzma.bak
2018-06-13T16:15:06.974Z,1528906506.974 [DataOverHttps](INFO): SBD MOMSN=8329521
2018-06-13T16:15:07.006Z,1528906507.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:07.046Z,1528906507.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:08.907Z,1528906508.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:08.925Z,1528906508.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:08.928Z,1528906508.928 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T16:15:08.928Z,1528906508.928 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T16:15:08.928Z,1528906508.928 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T16:15:09.061Z,1528906509.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:09.103Z,1528906509.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:12.184Z,1528906512.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:12.211Z,1528906512.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:12.316Z,1528906512.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:12.375Z,1528906512.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:12.722Z,1528906512.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:12.762Z,1528906512.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:13.118Z,1528906513.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:13.136Z,1528906513.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:13.523Z,1528906513.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:13.540Z,1528906513.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:13.922Z,1528906513.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:13.940Z,1528906513.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:14.318Z,1528906514.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:14.340Z,1528906514.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:14.722Z,1528906514.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:14.740Z,1528906514.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:15.121Z,1528906515.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:15.139Z,1528906515.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:15.519Z,1528906515.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:15.537Z,1528906515.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:15.922Z,1528906515.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:15.944Z,1528906515.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:16.322Z,1528906516.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:16.340Z,1528906516.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:16.719Z,1528906516.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:16.736Z,1528906516.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:17.124Z,1528906517.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:17.142Z,1528906517.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:17.522Z,1528906517.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:17.544Z,1528906517.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:17.919Z,1528906517.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:17.937Z,1528906517.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:18.326Z,1528906518.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:18.344Z,1528906518.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:18.724Z,1528906518.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:18.741Z,1528906518.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:19.120Z,1528906519.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:19.137Z,1528906519.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:19.524Z,1528906519.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:19.542Z,1528906519.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:19.923Z,1528906519.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:19.941Z,1528906519.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:20.320Z,1528906520.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:20.338Z,1528906520.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:20.717Z,1528906520.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:20.749Z,1528906520.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:21.122Z,1528906521.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:21.158Z,1528906521.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:21.521Z,1528906521.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:21.538Z,1528906521.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:21.914Z,1528906521.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:21.951Z,1528906521.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:22.318Z,1528906522.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:22.356Z,1528906522.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:22.714Z,1528906522.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:22.742Z,1528906522.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:23.119Z,1528906523.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:23.146Z,1528906523.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:23.518Z,1528906523.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:23.555Z,1528906523.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:23.915Z,1528906523.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:23.943Z,1528906523.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:24.319Z,1528906524.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:24.353Z,1528906524.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:24.719Z,1528906524.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:24.757Z,1528906524.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:25.120Z,1528906525.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:25.148Z,1528906525.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:25.519Z,1528906525.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:25.546Z,1528906525.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:25.919Z,1528906525.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:25.946Z,1528906525.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:26.318Z,1528906526.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:26.348Z,1528906526.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:26.714Z,1528906526.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:26.756Z,1528906526.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:27.117Z,1528906527.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:27.146Z,1528906527.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:27.517Z,1528906527.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:27.552Z,1528906527.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:27.914Z,1528906527.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:27.957Z,1528906527.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:28.318Z,1528906528.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:28.345Z,1528906528.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:28.714Z,1528906528.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:28.751Z,1528906528.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:29.114Z,1528906529.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:29.140Z,1528906529.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:29.518Z,1528906529.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:29.555Z,1528906529.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:29.919Z,1528906529.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:29.956Z,1528906529.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:30.318Z,1528906530.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:30.352Z,1528906530.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:30.718Z,1528906530.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:30.756Z,1528906530.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:31.114Z,1528906531.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:31.131Z,1528906531.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:31.518Z,1528906531.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:31.536Z,1528906531.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:31.922Z,1528906531.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:31.944Z,1528906531.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:32.321Z,1528906532.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:32.338Z,1528906532.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:32.720Z,1528906532.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:32.738Z,1528906532.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:33.122Z,1528906533.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:33.144Z,1528906533.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:33.523Z,1528906533.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:33.540Z,1528906533.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:33.920Z,1528906533.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:33.938Z,1528906533.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:34.322Z,1528906534.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:34.344Z,1528906534.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:34.725Z,1528906534.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:34.743Z,1528906534.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:35.120Z,1528906535.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:35.137Z,1528906535.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:35.522Z,1528906535.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:35.544Z,1528906535.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:35.919Z,1528906535.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:35.937Z,1528906535.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:36.323Z,1528906536.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:36.341Z,1528906536.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:36.724Z,1528906536.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:36.742Z,1528906536.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:37.122Z,1528906537.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:37.150Z,1528906537.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:37.523Z,1528906537.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:37.541Z,1528906537.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:37.922Z,1528906537.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:37.952Z,1528906537.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:38.323Z,1528906538.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:38.340Z,1528906538.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:38.719Z,1528906538.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:38.738Z,1528906538.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:39.124Z,1528906539.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:39.141Z,1528906539.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:39.527Z,1528906539.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:39.545Z,1528906539.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:39.920Z,1528906539.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:39.938Z,1528906539.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:40.324Z,1528906540.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:40.348Z,1528906540.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:40.724Z,1528906540.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:40.741Z,1528906540.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:41.120Z,1528906541.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:41.138Z,1528906541.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:41.531Z,1528906541.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:41.647Z,1528906541.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:41.919Z,1528906541.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:41.936Z,1528906541.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:42.314Z,1528906542.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:42.359Z,1528906542.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:42.748Z,1528906542.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:42.815Z,1528906542.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:43.114Z,1528906543.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:43.233Z,1528906543.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:43.514Z,1528906543.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:43.646Z,1528906543.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:43.918Z,1528906543.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:43.952Z,1528906543.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:44.315Z,1528906544.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:44.332Z,1528906544.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:44.714Z,1528906544.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:44.732Z,1528906544.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:45.118Z,1528906545.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:45.156Z,1528906545.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:45.518Z,1528906545.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:45.535Z,1528906545.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:45.914Z,1528906545.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:45.932Z,1528906545.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:46.319Z,1528906546.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:46.337Z,1528906546.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:46.717Z,1528906546.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:46.734Z,1528906546.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:47.117Z,1528906547.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:47.135Z,1528906547.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:47.520Z,1528906547.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:47.554Z,1528906547.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:47.919Z,1528906547.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:47.936Z,1528906547.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:48.321Z,1528906548.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:48.340Z,1528906548.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:48.724Z,1528906548.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:48.742Z,1528906548.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:49.120Z,1528906549.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:49.138Z,1528906549.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:49.520Z,1528906549.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:49.538Z,1528906549.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:49.922Z,1528906549.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:49.944Z,1528906549.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:50.320Z,1528906550.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:50.337Z,1528906550.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:50.720Z,1528906550.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:50.738Z,1528906550.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:51.122Z,1528906551.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:51.148Z,1528906551.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:51.520Z,1528906551.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:51.537Z,1528906551.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:51.920Z,1528906551.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:51.938Z,1528906551.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:52.323Z,1528906552.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:52.354Z,1528906552.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:52.720Z,1528906552.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:52.738Z,1528906552.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:53.120Z,1528906553.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:53.139Z,1528906553.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:53.524Z,1528906553.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:53.542Z,1528906553.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:53.920Z,1528906553.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:53.937Z,1528906553.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:54.319Z,1528906554.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:54.338Z,1528906554.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:54.717Z,1528906554.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:54.750Z,1528906554.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:55.119Z,1528906555.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:55.137Z,1528906555.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:55.514Z,1528906555.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:55.547Z,1528906555.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:55.924Z,1528906555.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:55.943Z,1528906555.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:56.314Z,1528906556.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:56.356Z,1528906556.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:56.714Z,1528906556.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:56.748Z,1528906556.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:57.117Z,1528906557.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:57.151Z,1528906557.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:57.518Z,1528906557.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:57.535Z,1528906557.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:57.914Z,1528906557.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:57.933Z,1528906557.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:58.322Z,1528906558.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:58.340Z,1528906558.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:58.717Z,1528906558.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:58.735Z,1528906558.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:59.118Z,1528906559.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:59.136Z,1528906559.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:59.522Z,1528906559.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:59.539Z,1528906559.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:15:59.917Z,1528906559.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:15:59.936Z,1528906559.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:00.318Z,1528906560.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:00.336Z,1528906560.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:00.722Z,1528906560.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:00.740Z,1528906560.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:01.117Z,1528906561.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:01.135Z,1528906561.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:01.522Z,1528906561.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:01.540Z,1528906561.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:01.922Z,1528906561.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:01.939Z,1528906561.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:02.317Z,1528906562.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:02.335Z,1528906562.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:02.718Z,1528906562.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:02.736Z,1528906562.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:03.122Z,1528906563.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:03.140Z,1528906563.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:03.522Z,1528906563.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:03.539Z,1528906563.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:03.918Z,1528906563.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:03.935Z,1528906563.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:04.322Z,1528906564.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:04.339Z,1528906564.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:04.717Z,1528906564.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:04.735Z,1528906564.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:05.122Z,1528906565.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:05.139Z,1528906565.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:05.521Z,1528906565.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:05.539Z,1528906565.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:05.917Z,1528906565.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:05.935Z,1528906565.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:06.317Z,1528906566.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:06.335Z,1528906566.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:06.721Z,1528906566.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:06.746Z,1528906566.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:07.121Z,1528906567.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:07.138Z,1528906567.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:07.520Z,1528906567.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:07.538Z,1528906567.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:07.921Z,1528906567.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:07.938Z,1528906567.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:08.321Z,1528906568.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:08.339Z,1528906568.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:08.719Z,1528906568.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:08.736Z,1528906568.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:09.125Z,1528906569.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:09.142Z,1528906569.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:09.524Z,1528906569.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:09.541Z,1528906569.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:12.638Z,1528906572.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:12.676Z,1528906572.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:12.786Z,1528906572.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:12.832Z,1528906572.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:13.190Z,1528906573.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:13.229Z,1528906573.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:13.586Z,1528906573.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:13.603Z,1528906573.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:13.990Z,1528906573.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:14.007Z,1528906574.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:14.389Z,1528906574.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:14.407Z,1528906574.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:14.785Z,1528906574.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:14.803Z,1528906574.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:15.188Z,1528906575.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:15.205Z,1528906575.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:15.592Z,1528906575.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:15.616Z,1528906575.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:15.987Z,1528906575.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:16.005Z,1528906576.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:16.391Z,1528906576.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:16.408Z,1528906576.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:16.790Z,1528906576.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:16.825Z,1528906576.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:17.187Z,1528906577.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:17.205Z,1528906577.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:17.593Z,1528906577.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:17.610Z,1528906577.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:17.990Z,1528906577.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:18.014Z,1528906578.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:18.388Z,1528906578.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:18.406Z,1528906578.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:18.782Z,1528906578.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:18.816Z,1528906578.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:19.186Z,1528906579.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:19.223Z,1528906579.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:19.586Z,1528906579.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:19.614Z,1528906579.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:19.985Z,1528906579.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:20.016Z,1528906580.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:20.386Z,1528906580.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:20.424Z,1528906580.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:20.782Z,1528906580.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:20.820Z,1528906580.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:21.182Z,1528906581.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:21.211Z,1528906581.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:21.302Z,1528906581.302 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T16:16:21.302Z,1528906581.302 [NAL9602] No Fault, FailCount= 5
2018-06-13T16:16:21.570Z,1528906581.570 [NAL9602](INFO): Powering up NAL9602
2018-06-13T16:16:21.587Z,1528906581.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:21.635Z,1528906581.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:21.982Z,1528906581.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:22.008Z,1528906582.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:22.387Z,1528906582.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:22.426Z,1528906582.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:22.787Z,1528906582.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:22.824Z,1528906582.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:23.187Z,1528906583.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:23.228Z,1528906583.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:23.590Z,1528906583.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:23.607Z,1528906583.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:23.991Z,1528906583.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:24.008Z,1528906584.008 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:24.009Z,1528906584.009 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 256
2018-06-13T16:16:24.009Z,1528906584.009 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:16:24.011Z,1528906584.011 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:24.011Z,1528906584.011 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 256
2018-06-13T16:16:24.011Z,1528906584.011 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:16:24.012Z,1528906584.012 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:24.029Z,1528906584.029 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 256
2018-06-13T16:16:24.029Z,1528906584.029 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:16:24.109Z,1528906584.109 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:16:24.109Z,1528906584.109 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:16:24.109Z,1528906584.109 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:16:24.392Z,1528906584.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:24.482Z,1528906584.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:16:24.482Z,1528906584.482 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 256
2018-06-13T16:16:24.482Z,1528906584.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:16:24.483Z,1528906584.483 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 256
2018-06-13T16:16:24.483Z,1528906584.483 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:16:24.483Z,1528906584.483 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 256
2018-06-13T16:16:24.788Z,1528906584.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:24.811Z,1528906584.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:16:24.811Z,1528906584.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:16:24.811Z,1528906584.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:16:24.812Z,1528906584.812 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:16:24.812Z,1528906584.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:16:24.812Z,1528906584.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:16:24.813Z,1528906584.813 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:16:24.813Z,1528906584.813 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:16:24.814Z,1528906584.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:16:25.190Z,1528906585.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:25.219Z,1528906585.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:16:25.220Z,1528906585.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:25.592Z,1528906585.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:25.610Z,1528906585.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:16:25.611Z,1528906585.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:25.988Z,1528906585.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:26.011Z,1528906586.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:16:26.012Z,1528906586.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:26.388Z,1528906586.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:26.418Z,1528906586.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:16:26.419Z,1528906586.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:26.782Z,1528906586.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:26.820Z,1528906586.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:16:26.825Z,1528906586.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:27.183Z,1528906587.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:27.216Z,1528906587.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:16:27.217Z,1528906587.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:27.587Z,1528906587.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:27.614Z,1528906587.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:16:27.615Z,1528906587.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:27.982Z,1528906587.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:28.019Z,1528906588.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:16:28.020Z,1528906588.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:28.386Z,1528906588.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:28.412Z,1528906588.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:16:28.413Z,1528906588.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:28.783Z,1528906588.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:28.812Z,1528906588.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:16:28.813Z,1528906588.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:29.183Z,1528906589.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:29.213Z,1528906589.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:16:29.214Z,1528906589.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:29.586Z,1528906589.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:29.603Z,1528906589.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:16:29.604Z,1528906589.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:29.987Z,1528906589.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:30.027Z,1528906590.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:16:30.028Z,1528906590.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:30.386Z,1528906590.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:30.404Z,1528906590.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:16:30.421Z,1528906590.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:30.790Z,1528906590.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:30.807Z,1528906590.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:16:30.808Z,1528906590.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:31.191Z,1528906591.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:31.209Z,1528906591.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:16:31.210Z,1528906591.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:31.589Z,1528906591.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:31.607Z,1528906591.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:16:31.608Z,1528906591.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:32.001Z,1528906592.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:32.035Z,1528906592.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:16:32.036Z,1528906592.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:32.373Z,1528906592.373 [NAL9602](INFO): NAL9602 initialized
2018-06-13T16:16:32.390Z,1528906592.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:32.408Z,1528906592.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:16:32.409Z,1528906592.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:32.790Z,1528906592.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:32.807Z,1528906592.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:16:32.808Z,1528906592.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:33.198Z,1528906593.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:33.216Z,1528906593.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:16:33.217Z,1528906593.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:33.602Z,1528906593.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:33.619Z,1528906593.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:16:33.620Z,1528906593.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:33.997Z,1528906593.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:34.015Z,1528906594.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:16:34.016Z,1528906594.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:34.392Z,1528906594.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:34.409Z,1528906594.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:16:34.410Z,1528906594.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:34.792Z,1528906594.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:34.826Z,1528906594.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:16:34.827Z,1528906594.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:35.190Z,1528906595.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:35.208Z,1528906595.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:16:35.209Z,1528906595.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:35.598Z,1528906595.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:35.620Z,1528906595.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:16:35.621Z,1528906595.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:36.002Z,1528906596.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:36.020Z,1528906596.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:16:36.021Z,1528906596.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:36.400Z,1528906596.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:36.424Z,1528906596.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:16:36.441Z,1528906596.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:36.794Z,1528906596.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:36.816Z,1528906596.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:16:36.817Z,1528906596.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:37.191Z,1528906597.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:37.223Z,1528906597.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:16:37.224Z,1528906597.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:37.591Z,1528906597.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:37.608Z,1528906597.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:16:37.609Z,1528906597.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:37.993Z,1528906597.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:38.011Z,1528906598.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:16:38.012Z,1528906598.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:38.402Z,1528906598.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:38.419Z,1528906598.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:16:38.420Z,1528906598.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:38.801Z,1528906598.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:38.819Z,1528906598.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:16:38.819Z,1528906598.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:39.198Z,1528906599.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:39.220Z,1528906599.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:16:39.221Z,1528906599.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:39.591Z,1528906599.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:39.623Z,1528906599.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:16:39.624Z,1528906599.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:39.991Z,1528906599.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:40.008Z,1528906600.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:16:40.009Z,1528906600.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:40.394Z,1528906600.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:40.411Z,1528906600.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:16:40.412Z,1528906600.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:40.795Z,1528906600.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:40.812Z,1528906600.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:16:40.814Z,1528906600.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:41.190Z,1528906601.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:41.208Z,1528906601.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:16:41.209Z,1528906601.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:41.599Z,1528906601.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:41.616Z,1528906601.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:16:41.617Z,1528906601.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:42.002Z,1528906602.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:42.019Z,1528906602.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:16:42.020Z,1528906602.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:42.403Z,1528906602.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:42.428Z,1528906602.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:16:42.429Z,1528906602.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:42.791Z,1528906602.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:42.815Z,1528906602.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:16:42.816Z,1528906602.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:43.191Z,1528906603.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:43.224Z,1528906603.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:16:43.229Z,1528906603.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:43.595Z,1528906603.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:43.612Z,1528906603.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T16:16:43.613Z,1528906603.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:43.991Z,1528906603.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:44.015Z,1528906604.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:44.403Z,1528906604.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:44.421Z,1528906604.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:44.803Z,1528906604.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:44.822Z,1528906604.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:45.203Z,1528906605.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:45.221Z,1528906605.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:45.591Z,1528906605.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:45.616Z,1528906605.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:45.983Z,1528906605.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:46.017Z,1528906606.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:46.387Z,1528906606.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:46.424Z,1528906606.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:46.788Z,1528906606.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:46.826Z,1528906606.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:47.183Z,1528906607.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:47.215Z,1528906607.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:47.598Z,1528906607.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:47.627Z,1528906607.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:48.008Z,1528906608.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:48.026Z,1528906608.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:48.409Z,1528906608.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:48.427Z,1528906608.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:48.784Z,1528906608.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:48.813Z,1528906608.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:49.187Z,1528906609.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:49.228Z,1528906609.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:49.588Z,1528906609.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:49.622Z,1528906609.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:49.983Z,1528906609.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:50.008Z,1528906610.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:50.402Z,1528906610.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:50.440Z,1528906610.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:50.802Z,1528906610.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:50.834Z,1528906610.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:51.202Z,1528906611.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:51.239Z,1528906611.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:51.590Z,1528906611.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:51.608Z,1528906611.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:51.986Z,1528906611.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:52.004Z,1528906612.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:52.391Z,1528906612.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:52.410Z,1528906612.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:52.790Z,1528906612.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:52.808Z,1528906612.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:53.186Z,1528906613.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:53.210Z,1528906613.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:53.602Z,1528906613.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:53.639Z,1528906613.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:54.001Z,1528906614.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:54.019Z,1528906614.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:54.402Z,1528906614.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:54.420Z,1528906614.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:54.788Z,1528906614.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:54.806Z,1528906614.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:55.191Z,1528906615.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:55.208Z,1528906615.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:55.590Z,1528906615.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:55.608Z,1528906615.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:55.992Z,1528906615.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:56.016Z,1528906616.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:56.397Z,1528906616.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:56.415Z,1528906616.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:56.797Z,1528906616.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:56.815Z,1528906616.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:57.198Z,1528906617.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:57.215Z,1528906617.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:57.591Z,1528906617.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:57.609Z,1528906617.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:57.990Z,1528906617.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:58.008Z,1528906618.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:58.392Z,1528906618.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:58.416Z,1528906618.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:58.792Z,1528906618.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:58.810Z,1528906618.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:59.190Z,1528906619.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:59.208Z,1528906619.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:16:59.598Z,1528906619.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:16:59.620Z,1528906619.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:00.001Z,1528906620.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:00.019Z,1528906620.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:00.399Z,1528906620.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:00.424Z,1528906620.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:00.791Z,1528906620.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:00.813Z,1528906620.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:01.192Z,1528906621.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:01.211Z,1528906621.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:01.594Z,1528906621.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:01.612Z,1528906621.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:01.994Z,1528906621.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:02.012Z,1528906622.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:02.398Z,1528906622.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:02.416Z,1528906622.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:02.801Z,1528906622.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:02.819Z,1528906622.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:03.202Z,1528906623.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:03.219Z,1528906623.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:03.591Z,1528906623.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:03.620Z,1528906623.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:03.994Z,1528906623.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:04.012Z,1528906624.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:04.391Z,1528906624.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:04.413Z,1528906624.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:04.793Z,1528906624.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:04.811Z,1528906624.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:05.194Z,1528906625.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:05.218Z,1528906625.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:05.598Z,1528906625.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:05.620Z,1528906625.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:06.001Z,1528906626.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:06.024Z,1528906626.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:06.398Z,1528906626.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:06.416Z,1528906626.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:06.791Z,1528906626.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:06.821Z,1528906626.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:07.193Z,1528906627.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:07.210Z,1528906627.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:07.590Z,1528906627.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:07.612Z,1528906627.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:07.991Z,1528906627.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:08.014Z,1528906628.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:08.403Z,1528906628.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:08.420Z,1528906628.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:08.803Z,1528906628.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:08.821Z,1528906628.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:09.202Z,1528906629.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:09.224Z,1528906629.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:09.593Z,1528906629.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:09.616Z,1528906629.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:09.990Z,1528906629.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:10.008Z,1528906630.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:10.394Z,1528906630.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:10.411Z,1528906630.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:10.793Z,1528906630.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:10.816Z,1528906630.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:11.194Z,1528906631.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:11.218Z,1528906631.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:11.603Z,1528906631.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:11.621Z,1528906631.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:12.002Z,1528906632.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:12.019Z,1528906632.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:12.405Z,1528906632.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:12.428Z,1528906632.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:15.503Z,1528906635.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:15.521Z,1528906635.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:15.628Z,1528906635.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:15.672Z,1528906635.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:16.052Z,1528906636.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:16.069Z,1528906636.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:16.451Z,1528906636.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:16.469Z,1528906636.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:16.847Z,1528906636.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:16.866Z,1528906636.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:17.231Z,1528906637.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:17.270Z,1528906637.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:17.628Z,1528906637.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:17.661Z,1528906637.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:18.031Z,1528906638.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:18.058Z,1528906638.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:18.451Z,1528906638.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:18.469Z,1528906638.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:18.846Z,1528906638.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:18.864Z,1528906638.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:19.247Z,1528906639.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:19.265Z,1528906639.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:19.632Z,1528906639.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:19.660Z,1528906639.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:20.027Z,1528906640.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:20.060Z,1528906640.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:20.431Z,1528906640.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:20.458Z,1528906640.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:20.832Z,1528906640.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:20.864Z,1528906640.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:21.227Z,1528906641.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:21.264Z,1528906641.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:21.644Z,1528906641.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:21.663Z,1528906641.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:22.052Z,1528906642.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:22.070Z,1528906642.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:22.448Z,1528906642.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:22.466Z,1528906642.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:22.827Z,1528906642.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:22.865Z,1528906642.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:23.232Z,1528906643.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:23.268Z,1528906643.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:23.628Z,1528906643.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:23.662Z,1528906643.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:24.027Z,1528906644.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:24.061Z,1528906644.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:24.442Z,1528906644.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:24.480Z,1528906644.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:24.842Z,1528906644.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:24.871Z,1528906644.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:25.241Z,1528906645.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:25.269Z,1528906645.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:25.631Z,1528906645.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:25.666Z,1528906645.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:26.027Z,1528906646.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:26.048Z,1528906646.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:26.435Z,1528906646.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:26.470Z,1528906646.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:26.834Z,1528906646.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:26.856Z,1528906646.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:27.230Z,1528906647.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:27.256Z,1528906647.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:27.645Z,1528906647.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:27.676Z,1528906647.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:28.045Z,1528906648.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:28.063Z,1528906648.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:28.438Z,1528906648.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:28.461Z,1528906648.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:28.833Z,1528906648.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:28.851Z,1528906648.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:29.236Z,1528906649.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:29.264Z,1528906649.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:29.634Z,1528906649.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:29.652Z,1528906649.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:30.034Z,1528906650.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:30.051Z,1528906650.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:30.445Z,1528906650.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:30.463Z,1528906650.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:30.842Z,1528906650.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:30.864Z,1528906650.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:31.244Z,1528906651.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:31.262Z,1528906651.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:31.636Z,1528906651.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:31.666Z,1528906651.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:32.030Z,1528906652.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:32.068Z,1528906652.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:32.432Z,1528906652.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:32.466Z,1528906652.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:32.828Z,1528906652.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:32.854Z,1528906652.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:33.227Z,1528906653.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:33.274Z,1528906653.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:33.638Z,1528906653.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:33.667Z,1528906653.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:34.057Z,1528906654.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:34.075Z,1528906654.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:34.437Z,1528906654.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:34.476Z,1528906654.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:34.831Z,1528906654.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:34.860Z,1528906654.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:35.231Z,1528906655.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:35.248Z,1528906655.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:35.632Z,1528906655.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:35.650Z,1528906655.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:36.031Z,1528906656.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:36.049Z,1528906656.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:36.445Z,1528906656.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:36.479Z,1528906656.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:36.841Z,1528906656.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:36.859Z,1528906656.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:37.245Z,1528906657.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:37.263Z,1528906657.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:37.636Z,1528906657.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:37.653Z,1528906657.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:38.031Z,1528906658.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:38.065Z,1528906658.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:38.436Z,1528906658.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:38.454Z,1528906658.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:38.839Z,1528906658.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:38.856Z,1528906658.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:39.231Z,1528906659.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:39.254Z,1528906659.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:39.642Z,1528906659.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:39.660Z,1528906659.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:40.045Z,1528906660.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:40.063Z,1528906660.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:40.442Z,1528906660.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:40.464Z,1528906660.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:40.837Z,1528906660.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:40.855Z,1528906660.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:41.236Z,1528906661.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:41.260Z,1528906661.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:41.634Z,1528906661.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:41.652Z,1528906661.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:42.036Z,1528906662.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:42.054Z,1528906662.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:42.443Z,1528906662.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:42.468Z,1528906662.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:42.846Z,1528906662.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:42.864Z,1528906662.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:43.242Z,1528906663.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:43.260Z,1528906663.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:43.637Z,1528906663.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:43.655Z,1528906663.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:44.030Z,1528906664.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:44.060Z,1528906664.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:44.437Z,1528906664.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:44.455Z,1528906664.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:44.838Z,1528906664.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:44.856Z,1528906664.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:45.231Z,1528906665.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:45.256Z,1528906665.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:45.646Z,1528906665.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:45.664Z,1528906665.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:46.046Z,1528906666.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:46.068Z,1528906666.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:46.443Z,1528906666.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:46.461Z,1528906666.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:46.836Z,1528906666.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:46.854Z,1528906666.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:47.239Z,1528906667.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:47.256Z,1528906667.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:47.632Z,1528906667.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:47.657Z,1528906667.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:48.036Z,1528906668.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:48.054Z,1528906668.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:48.447Z,1528906668.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:48.468Z,1528906668.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:48.846Z,1528906668.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:48.863Z,1528906668.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:49.246Z,1528906669.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:49.264Z,1528906669.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:49.638Z,1528906669.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:49.655Z,1528906669.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:50.030Z,1528906670.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:50.063Z,1528906670.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:50.437Z,1528906670.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:50.455Z,1528906670.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:50.837Z,1528906670.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:50.855Z,1528906670.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:51.237Z,1528906671.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:51.255Z,1528906671.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:51.646Z,1528906671.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:51.664Z,1528906671.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:52.046Z,1528906672.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:52.063Z,1528906672.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:52.447Z,1528906672.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:52.472Z,1528906672.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:52.837Z,1528906672.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:52.854Z,1528906672.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:53.230Z,1528906673.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:53.266Z,1528906673.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:53.637Z,1528906673.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:53.663Z,1528906673.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:54.036Z,1528906674.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:54.054Z,1528906674.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:54.447Z,1528906674.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:54.464Z,1528906674.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:54.846Z,1528906674.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:54.868Z,1528906674.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:55.247Z,1528906675.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:55.264Z,1528906675.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:55.638Z,1528906675.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:55.655Z,1528906675.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:56.030Z,1528906676.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:56.063Z,1528906676.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:56.435Z,1528906676.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:56.467Z,1528906676.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:56.838Z,1528906676.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:56.855Z,1528906676.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:57.233Z,1528906677.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:57.256Z,1528906677.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:57.646Z,1528906677.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:57.664Z,1528906677.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:58.047Z,1528906678.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:58.064Z,1528906678.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:58.446Z,1528906678.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:58.464Z,1528906678.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:58.835Z,1528906678.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:58.858Z,1528906678.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:59.238Z,1528906679.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:59.256Z,1528906679.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:17:59.630Z,1528906679.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:17:59.664Z,1528906679.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:00.035Z,1528906680.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:00.058Z,1528906680.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:00.447Z,1528906680.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:00.465Z,1528906680.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:00.846Z,1528906680.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:00.868Z,1528906680.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:01.247Z,1528906681.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:01.265Z,1528906681.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:01.643Z,1528906681.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:01.660Z,1528906681.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:02.039Z,1528906682.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:02.057Z,1528906682.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:02.435Z,1528906682.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:02.458Z,1528906682.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:02.839Z,1528906682.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:02.857Z,1528906682.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:03.238Z,1528906683.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:03.260Z,1528906683.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:03.646Z,1528906683.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:03.664Z,1528906683.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:04.048Z,1528906684.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:04.065Z,1528906684.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:04.446Z,1528906684.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:04.464Z,1528906684.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:04.835Z,1528906684.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:04.867Z,1528906684.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:05.235Z,1528906685.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:05.283Z,1528906685.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:05.637Z,1528906685.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:05.656Z,1528906685.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:06.035Z,1528906686.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:06.062Z,1528906686.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:06.452Z,1528906686.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:06.476Z,1528906686.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:06.852Z,1528906686.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:06.870Z,1528906686.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:07.247Z,1528906687.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:07.266Z,1528906687.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:07.631Z,1528906687.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:07.659Z,1528906687.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:08.031Z,1528906688.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:08.059Z,1528906688.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:08.431Z,1528906688.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:08.458Z,1528906688.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:08.832Z,1528906688.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:08.862Z,1528906688.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:09.235Z,1528906689.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:09.263Z,1528906689.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:09.653Z,1528906689.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:09.671Z,1528906689.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:12.761Z,1528906692.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:12.779Z,1528906692.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:12.934Z,1528906692.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:12.976Z,1528906692.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:13.311Z,1528906693.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:13.329Z,1528906693.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:13.717Z,1528906693.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:13.746Z,1528906693.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:14.111Z,1528906694.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:14.139Z,1528906694.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:14.531Z,1528906694.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:14.549Z,1528906694.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:14.935Z,1528906694.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:14.952Z,1528906694.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:15.331Z,1528906695.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:15.348Z,1528906695.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:15.711Z,1528906695.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:15.745Z,1528906695.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:16.111Z,1528906696.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:16.141Z,1528906696.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:16.511Z,1528906696.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:16.546Z,1528906696.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:16.911Z,1528906696.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:16.939Z,1528906696.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:17.311Z,1528906697.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:17.340Z,1528906697.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:17.728Z,1528906697.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:17.745Z,1528906697.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:18.132Z,1528906698.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:18.156Z,1528906698.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:18.533Z,1528906698.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:18.551Z,1528906698.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:18.908Z,1528906698.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:18.945Z,1528906698.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:19.312Z,1528906699.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:19.346Z,1528906699.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:19.725Z,1528906699.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:19.742Z,1528906699.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:20.107Z,1528906700.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:20.143Z,1528906700.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:20.528Z,1528906700.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:20.546Z,1528906700.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:20.929Z,1528906700.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:20.953Z,1528906700.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:21.321Z,1528906701.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:21.358Z,1528906701.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:21.708Z,1528906701.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:21.744Z,1528906701.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:22.111Z,1528906702.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:22.150Z,1528906702.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:22.511Z,1528906702.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:22.539Z,1528906702.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:22.912Z,1528906702.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:22.938Z,1528906702.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:23.312Z,1528906703.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:23.340Z,1528906703.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:23.727Z,1528906703.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:23.746Z,1528906703.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:24.130Z,1528906704.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:24.152Z,1528906704.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:24.536Z,1528906704.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:24.554Z,1528906704.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:24.907Z,1528906704.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:24.941Z,1528906704.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:25.311Z,1528906705.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:25.344Z,1528906705.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:25.712Z,1528906705.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:25.742Z,1528906705.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:26.107Z,1528906706.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:26.132Z,1528906706.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:26.529Z,1528906706.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:26.557Z,1528906706.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:26.929Z,1528906706.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:26.958Z,1528906706.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:27.321Z,1528906707.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:27.355Z,1528906707.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:27.714Z,1528906707.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:27.732Z,1528906707.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:28.114Z,1528906708.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:28.132Z,1528906708.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:28.514Z,1528906708.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:28.533Z,1528906708.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:28.913Z,1528906708.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:28.936Z,1528906708.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:29.314Z,1528906709.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:29.332Z,1528906709.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:29.725Z,1528906709.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:29.759Z,1528906709.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:30.125Z,1528906710.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:30.143Z,1528906710.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:30.525Z,1528906710.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:30.544Z,1528906710.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:30.916Z,1528906710.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:30.934Z,1528906710.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:31.317Z,1528906711.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:31.334Z,1528906711.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:31.716Z,1528906711.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:31.742Z,1528906711.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:32.111Z,1528906712.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:32.134Z,1528906712.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:32.522Z,1528906712.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:32.540Z,1528906712.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:32.922Z,1528906712.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:32.940Z,1528906712.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:33.326Z,1528906713.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:33.344Z,1528906713.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:33.717Z,1528906713.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:33.735Z,1528906713.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:34.118Z,1528906714.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:34.136Z,1528906714.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:34.511Z,1528906714.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:34.534Z,1528906714.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:34.918Z,1528906714.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:34.935Z,1528906714.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:35.310Z,1528906715.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:35.336Z,1528906715.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:35.727Z,1528906715.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:35.744Z,1528906715.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:36.130Z,1528906716.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:36.148Z,1528906716.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:36.533Z,1528906716.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:36.551Z,1528906716.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:36.907Z,1528906716.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:36.943Z,1528906716.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:37.315Z,1528906717.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:37.340Z,1528906717.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:37.712Z,1528906717.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:37.746Z,1528906717.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:38.112Z,1528906718.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:38.143Z,1528906718.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:38.527Z,1528906718.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:38.545Z,1528906718.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:38.931Z,1528906718.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:38.957Z,1528906718.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:39.317Z,1528906719.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:39.353Z,1528906719.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:39.711Z,1528906719.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:39.741Z,1528906719.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:40.111Z,1528906720.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:40.138Z,1528906720.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:40.511Z,1528906720.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:40.529Z,1528906720.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:40.910Z,1528906720.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:40.932Z,1528906720.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:41.315Z,1528906721.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:41.333Z,1528906721.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:41.721Z,1528906721.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:41.739Z,1528906721.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:42.125Z,1528906722.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:42.164Z,1528906722.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:42.525Z,1528906722.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:42.543Z,1528906722.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:42.918Z,1528906722.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:42.936Z,1528906722.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:43.316Z,1528906723.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:43.340Z,1528906723.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:43.719Z,1528906723.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:43.737Z,1528906723.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:44.111Z,1528906724.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:44.134Z,1528906724.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:44.522Z,1528906724.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:44.540Z,1528906724.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:44.926Z,1528906724.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:44.944Z,1528906724.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:45.322Z,1528906725.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:45.348Z,1528906725.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:45.715Z,1528906725.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:45.746Z,1528906725.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:46.122Z,1528906726.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:46.140Z,1528906726.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:46.518Z,1528906726.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:46.535Z,1528906726.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:46.916Z,1528906726.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:46.946Z,1528906726.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:47.312Z,1528906727.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:47.345Z,1528906727.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:47.732Z,1528906727.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:47.749Z,1528906727.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:48.130Z,1528906728.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:48.152Z,1528906728.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:48.533Z,1528906728.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:48.551Z,1528906728.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:48.907Z,1528906728.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:48.944Z,1528906728.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:49.311Z,1528906729.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:49.347Z,1528906729.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:49.713Z,1528906729.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:49.748Z,1528906729.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:50.111Z,1528906730.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:50.144Z,1528906730.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:50.528Z,1528906730.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:50.546Z,1528906730.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:50.931Z,1528906730.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:50.949Z,1528906730.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:51.327Z,1528906731.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:51.346Z,1528906731.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:51.711Z,1528906731.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:51.754Z,1528906731.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:52.111Z,1528906732.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:52.137Z,1528906732.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:52.508Z,1528906732.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:52.525Z,1528906732.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:52.910Z,1528906732.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:52.932Z,1528906732.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:53.311Z,1528906733.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:53.330Z,1528906733.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:53.721Z,1528906733.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:53.755Z,1528906733.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:54.129Z,1528906734.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:54.162Z,1528906734.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:54.526Z,1528906734.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:54.560Z,1528906734.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:54.915Z,1528906734.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:54.940Z,1528906734.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:55.314Z,1528906735.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:55.336Z,1528906735.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:55.715Z,1528906735.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:55.733Z,1528906735.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:56.111Z,1528906736.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:56.141Z,1528906736.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:56.522Z,1528906736.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:56.541Z,1528906736.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:56.925Z,1528906736.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:56.943Z,1528906736.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:57.330Z,1528906737.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:57.347Z,1528906737.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:57.718Z,1528906737.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:57.735Z,1528906737.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:58.115Z,1528906738.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:58.148Z,1528906738.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:58.511Z,1528906738.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:58.536Z,1528906738.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:58.918Z,1528906738.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:58.940Z,1528906738.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:59.318Z,1528906739.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:59.358Z,1528906739.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:18:59.723Z,1528906739.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:18:59.741Z,1528906739.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:00.126Z,1528906740.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:00.144Z,1528906740.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:00.526Z,1528906740.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:00.544Z,1528906740.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:00.911Z,1528906740.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:00.935Z,1528906740.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:01.315Z,1528906741.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:01.338Z,1528906741.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:01.718Z,1528906741.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:01.741Z,1528906741.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:02.117Z,1528906742.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:02.135Z,1528906742.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:02.522Z,1528906742.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:02.540Z,1528906742.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:02.922Z,1528906742.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:02.940Z,1528906742.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:03.326Z,1528906743.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:03.344Z,1528906743.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:03.715Z,1528906743.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:03.737Z,1528906743.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:04.119Z,1528906744.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:04.137Z,1528906744.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:04.517Z,1528906744.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:04.535Z,1528906744.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:04.918Z,1528906744.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:04.936Z,1528906744.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:05.315Z,1528906745.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:05.347Z,1528906745.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:05.722Z,1528906745.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:05.740Z,1528906745.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:06.126Z,1528906746.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:06.144Z,1528906746.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:06.529Z,1528906746.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:06.547Z,1528906746.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:06.913Z,1528906746.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:06.931Z,1528906746.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:07.315Z,1528906747.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:07.337Z,1528906747.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:07.716Z,1528906747.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:07.747Z,1528906747.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:08.111Z,1528906748.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:08.135Z,1528906748.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:08.526Z,1528906748.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:08.543Z,1528906748.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:08.927Z,1528906748.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:08.945Z,1528906748.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:09.329Z,1528906749.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:09.347Z,1528906749.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:09.721Z,1528906749.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:09.738Z,1528906749.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:12.901Z,1528906752.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:12.929Z,1528906752.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:13.066Z,1528906753.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:13.103Z,1528906753.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:13.475Z,1528906753.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:13.493Z,1528906753.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:13.879Z,1528906753.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:13.904Z,1528906753.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:14.277Z,1528906754.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:14.295Z,1528906754.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:14.663Z,1528906754.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:14.694Z,1528906754.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:15.059Z,1528906755.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:15.097Z,1528906755.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:15.465Z,1528906755.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:15.507Z,1528906755.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:15.879Z,1528906755.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:15.896Z,1528906755.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:16.281Z,1528906756.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:16.299Z,1528906756.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:16.660Z,1528906756.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:16.696Z,1528906756.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:17.059Z,1528906757.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:17.096Z,1528906757.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:17.482Z,1528906757.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:17.500Z,1528906757.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:17.876Z,1528906757.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:17.895Z,1528906757.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:18.275Z,1528906758.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:18.293Z,1528906758.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:18.660Z,1528906758.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:18.694Z,1528906758.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:19.059Z,1528906759.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:19.095Z,1528906759.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:19.469Z,1528906759.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:19.498Z,1528906759.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:19.881Z,1528906759.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:19.899Z,1528906759.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:20.269Z,1528906760.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:20.303Z,1528906760.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:20.659Z,1528906760.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:20.689Z,1528906760.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:21.060Z,1528906761.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:21.094Z,1528906761.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:21.459Z,1528906761.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:21.504Z,1528906761.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:21.873Z,1528906761.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:21.908Z,1528906761.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:22.277Z,1528906762.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:22.306Z,1528906762.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:22.673Z,1528906762.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:22.707Z,1528906762.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:23.063Z,1528906763.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:23.080Z,1528906763.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:23.462Z,1528906763.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:23.480Z,1528906763.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:23.859Z,1528906763.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:23.876Z,1528906763.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:24.262Z,1528906764.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:24.281Z,1528906764.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:24.673Z,1528906764.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:24.707Z,1528906764.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:25.077Z,1528906765.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:25.115Z,1528906765.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:25.115Z,1528906765.115 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 257
2018-06-13T16:19:25.115Z,1528906765.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:19:25.121Z,1528906765.121 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:25.121Z,1528906765.121 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 257
2018-06-13T16:19:25.121Z,1528906765.121 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:19:25.123Z,1528906765.123 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:25.123Z,1528906765.123 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 257
2018-06-13T16:19:25.123Z,1528906765.123 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:19:25.205Z,1528906765.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:19:25.205Z,1528906765.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:19:25.206Z,1528906765.206 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:19:25.471Z,1528906765.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:25.565Z,1528906765.565 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:19:25.565Z,1528906765.565 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 257
2018-06-13T16:19:25.566Z,1528906765.566 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:19:25.566Z,1528906765.566 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 257
2018-06-13T16:19:25.566Z,1528906765.566 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:19:25.566Z,1528906765.566 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 257
2018-06-13T16:19:25.855Z,1528906765.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:25.891Z,1528906765.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:19:25.892Z,1528906765.892 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:19:25.892Z,1528906765.892 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:19:25.893Z,1528906765.893 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:19:25.893Z,1528906765.893 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:19:25.893Z,1528906765.893 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:19:25.894Z,1528906765.894 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:19:25.894Z,1528906765.894 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:19:25.894Z,1528906765.894 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:19:26.255Z,1528906766.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:26.291Z,1528906766.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:19:26.292Z,1528906766.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:26.659Z,1528906766.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:26.688Z,1528906766.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:19:26.689Z,1528906766.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:27.061Z,1528906767.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:27.091Z,1528906767.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:19:27.091Z,1528906767.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:27.455Z,1528906767.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:27.487Z,1528906767.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:19:27.488Z,1528906767.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:27.875Z,1528906767.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:27.893Z,1528906767.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:19:27.894Z,1528906767.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:28.280Z,1528906768.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:28.298Z,1528906768.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:19:28.299Z,1528906768.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:28.675Z,1528906768.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:28.693Z,1528906768.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:19:28.694Z,1528906768.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:29.059Z,1528906769.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:29.095Z,1528906769.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:19:29.096Z,1528906769.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:29.459Z,1528906769.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:29.496Z,1528906769.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:19:29.497Z,1528906769.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:29.856Z,1528906769.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:29.899Z,1528906769.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:19:29.900Z,1528906769.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:30.259Z,1528906770.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:30.291Z,1528906770.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:19:30.292Z,1528906770.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:30.680Z,1528906770.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:30.698Z,1528906770.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:19:30.699Z,1528906770.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:31.079Z,1528906771.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:31.098Z,1528906771.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:19:31.099Z,1528906771.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:31.469Z,1528906771.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:31.538Z,1528906771.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:19:31.539Z,1528906771.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:31.859Z,1528906771.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:31.897Z,1528906771.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:19:31.898Z,1528906771.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:32.259Z,1528906772.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:32.299Z,1528906772.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:19:32.300Z,1528906772.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:32.659Z,1528906772.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:32.699Z,1528906772.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:19:32.700Z,1528906772.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:33.060Z,1528906773.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:33.093Z,1528906773.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:19:33.094Z,1528906773.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:33.459Z,1528906773.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:33.476Z,1528906773.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:19:33.477Z,1528906773.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:33.873Z,1528906773.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:33.908Z,1528906773.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:19:33.908Z,1528906773.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:34.277Z,1528906774.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:34.305Z,1528906774.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:19:34.306Z,1528906774.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:34.673Z,1528906774.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:34.708Z,1528906774.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:19:34.709Z,1528906774.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:35.063Z,1528906775.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:35.080Z,1528906775.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:19:35.081Z,1528906775.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:35.462Z,1528906775.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:35.480Z,1528906775.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:19:35.481Z,1528906775.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:35.863Z,1528906775.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:35.881Z,1528906775.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:19:35.882Z,1528906775.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:36.262Z,1528906776.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:36.280Z,1528906776.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:19:36.280Z,1528906776.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:36.677Z,1528906776.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:36.711Z,1528906776.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:19:36.712Z,1528906776.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:37.073Z,1528906777.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:37.107Z,1528906777.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:19:37.107Z,1528906777.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:37.473Z,1528906777.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:37.491Z,1528906777.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:19:37.492Z,1528906777.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:37.866Z,1528906777.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:37.883Z,1528906777.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:19:37.884Z,1528906777.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:38.264Z,1528906778.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:38.282Z,1528906778.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:19:38.283Z,1528906778.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:38.664Z,1528906778.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:38.696Z,1528906778.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:19:38.701Z,1528906778.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:39.067Z,1528906779.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:39.085Z,1528906779.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:19:39.086Z,1528906779.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:39.459Z,1528906779.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:39.482Z,1528906779.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:19:39.483Z,1528906779.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:39.870Z,1528906779.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:39.892Z,1528906779.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:19:39.893Z,1528906779.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:40.273Z,1528906780.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:40.291Z,1528906780.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:19:40.292Z,1528906780.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:40.674Z,1528906780.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:40.692Z,1528906780.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:19:40.693Z,1528906780.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:41.063Z,1528906781.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:41.094Z,1528906781.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:19:41.095Z,1528906781.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:41.467Z,1528906781.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:41.484Z,1528906781.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:19:41.486Z,1528906781.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:41.859Z,1528906781.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:41.883Z,1528906781.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:19:41.884Z,1528906781.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:42.263Z,1528906782.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:42.310Z,1528906782.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:19:42.311Z,1528906782.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:42.674Z,1528906782.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:42.700Z,1528906782.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:19:42.713Z,1528906782.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:43.074Z,1528906783.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:43.096Z,1528906783.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:19:43.097Z,1528906783.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:43.475Z,1528906783.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:43.492Z,1528906783.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:19:43.493Z,1528906783.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:43.866Z,1528906783.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:43.884Z,1528906783.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:19:43.885Z,1528906783.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:44.259Z,1528906784.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:44.282Z,1528906784.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:19:44.283Z,1528906784.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:44.663Z,1528906784.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:44.686Z,1528906784.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T16:19:44.687Z,1528906784.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:45.066Z,1528906785.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:45.084Z,1528906785.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T16:19:45.086Z,1528906785.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:45.466Z,1528906785.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:45.488Z,1528906785.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:45.874Z,1528906785.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:45.892Z,1528906785.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:46.273Z,1528906786.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:46.296Z,1528906786.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:46.671Z,1528906786.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:46.689Z,1528906786.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:47.063Z,1528906787.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:47.085Z,1528906787.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:47.466Z,1528906787.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:47.484Z,1528906787.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:47.862Z,1528906787.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:47.879Z,1528906787.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:48.266Z,1528906788.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:48.283Z,1528906788.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:48.675Z,1528906788.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:48.693Z,1528906788.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:49.075Z,1528906789.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:49.093Z,1528906789.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:49.475Z,1528906789.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:49.493Z,1528906789.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:49.866Z,1528906789.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:49.889Z,1528906789.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:50.256Z,1528906790.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:50.288Z,1528906790.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:50.666Z,1528906790.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:50.684Z,1528906790.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:51.064Z,1528906791.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:51.090Z,1528906791.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:51.456Z,1528906791.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:51.483Z,1528906791.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:51.876Z,1528906791.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:51.894Z,1528906791.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:52.275Z,1528906792.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:52.312Z,1528906792.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:52.670Z,1528906792.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:52.694Z,1528906792.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:53.059Z,1528906793.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:53.096Z,1528906793.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:53.455Z,1528906793.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:53.496Z,1528906793.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:53.856Z,1528906793.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:53.889Z,1528906793.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:54.259Z,1528906794.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:54.293Z,1528906794.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:54.673Z,1528906794.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:54.703Z,1528906794.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:55.073Z,1528906795.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:55.101Z,1528906795.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:55.469Z,1528906795.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:55.506Z,1528906795.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:55.859Z,1528906795.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:55.905Z,1528906795.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:56.259Z,1528906796.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:56.277Z,1528906796.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:56.663Z,1528906796.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:56.680Z,1528906796.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:57.063Z,1528906797.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:57.080Z,1528906797.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:57.458Z,1528906797.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:57.476Z,1528906797.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:57.873Z,1528906797.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:57.907Z,1528906797.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:58.269Z,1528906798.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:58.286Z,1528906798.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:58.673Z,1528906798.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:58.691Z,1528906798.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:59.064Z,1528906799.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:59.083Z,1528906799.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:59.462Z,1528906799.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:59.479Z,1528906799.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:19:59.858Z,1528906799.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:19:59.892Z,1528906799.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:00.264Z,1528906800.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:00.282Z,1528906800.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:00.673Z,1528906800.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:00.691Z,1528906800.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:01.070Z,1528906801.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:01.093Z,1528906801.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:01.470Z,1528906801.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:01.494Z,1528906801.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:01.866Z,1528906801.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:01.884Z,1528906801.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:02.259Z,1528906802.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:02.282Z,1528906802.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:02.663Z,1528906802.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:02.685Z,1528906802.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:03.062Z,1528906803.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:03.079Z,1528906803.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:03.459Z,1528906803.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:03.482Z,1528906803.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:03.871Z,1528906803.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:03.888Z,1528906803.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:04.273Z,1528906804.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:04.290Z,1528906804.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:04.668Z,1528906804.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:04.700Z,1528906804.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:05.063Z,1528906805.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:05.086Z,1528906805.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:05.465Z,1528906805.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:05.483Z,1528906805.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:05.855Z,1528906805.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:05.891Z,1528906805.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:06.262Z,1528906806.262 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:06.285Z,1528906806.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:06.679Z,1528906806.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:06.697Z,1528906806.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:07.078Z,1528906807.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:07.100Z,1528906807.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:07.475Z,1528906807.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:07.493Z,1528906807.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:07.865Z,1528906807.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:07.883Z,1528906807.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:08.265Z,1528906808.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:08.282Z,1528906808.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:08.663Z,1528906808.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:08.697Z,1528906808.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:09.056Z,1528906809.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:09.084Z,1528906809.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:09.469Z,1528906809.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:09.486Z,1528906809.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:09.489Z,1528906809.489 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T16:20:09.490Z,1528906809.490 [Default:CheckIn:C.Wait] Stopped
2018-06-13T16:20:09.490Z,1528906809.490 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T16:20:09.490Z,1528906809.490 [Default:CheckIn:D] Running Loop=1
2018-06-13T16:20:09.873Z,1528906809.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:09.896Z,1528906809.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:09.899Z,1528906809.899 [Default:CheckIn:D] Stopped
2018-06-13T16:20:09.899Z,1528906809.899 [Default:CheckIn:E] Running Loop=1
2018-06-13T16:20:10.279Z,1528906810.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:10.297Z,1528906810.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:10.300Z,1528906810.300 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 772.940885 min 
2018-06-13T16:20:10.300Z,1528906810.300 [Default:CheckIn:E] Stopped
2018-06-13T16:20:10.300Z,1528906810.300 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T16:20:10.301Z,1528906810.301 [Default:CheckIn] Stopped
2018-06-13T16:20:10.301Z,1528906810.301 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T16:20:10.301Z,1528906810.301 [Default:CheckIn](INFO): Running loop #75
2018-06-13T16:20:10.301Z,1528906810.301 [Default:CheckIn] Running Loop=75
2018-06-13T16:20:10.301Z,1528906810.301 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T16:20:10.301Z,1528906810.301 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T16:20:10.670Z,1528906810.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:10.704Z,1528906810.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:11.059Z,1528906811.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:11.088Z,1528906811.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:11.459Z,1528906811.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:11.476Z,1528906811.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:11.860Z,1528906811.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:11.889Z,1528906811.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:12.263Z,1528906812.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:12.280Z,1528906812.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:12.677Z,1528906812.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:12.707Z,1528906812.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:13.077Z,1528906813.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:13.104Z,1528906813.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:13.473Z,1528906813.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:13.511Z,1528906813.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:13.863Z,1528906813.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:13.880Z,1528906813.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:14.263Z,1528906814.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:14.280Z,1528906814.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:17.382Z,1528906817.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:17.410Z,1528906817.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:17.524Z,1528906817.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:17.567Z,1528906817.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:17.947Z,1528906817.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:17.965Z,1528906817.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:18.356Z,1528906818.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:18.380Z,1528906818.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:18.745Z,1528906818.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:18.762Z,1528906818.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:19.127Z,1528906819.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:19.163Z,1528906819.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:19.531Z,1528906819.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:19.560Z,1528906819.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:19.928Z,1528906819.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:19.959Z,1528906819.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:20.327Z,1528906820.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:20.359Z,1528906820.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:20.752Z,1528906820.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:20.776Z,1528906820.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:21.148Z,1528906821.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:21.166Z,1528906821.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:21.548Z,1528906821.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:21.565Z,1528906821.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:21.931Z,1528906821.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:21.964Z,1528906821.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:22.327Z,1528906822.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:22.365Z,1528906822.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:22.731Z,1528906822.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:22.767Z,1528906822.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:23.131Z,1528906823.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:23.164Z,1528906823.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:23.532Z,1528906823.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:23.573Z,1528906823.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:23.941Z,1528906823.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:23.976Z,1528906823.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:24.345Z,1528906824.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:24.374Z,1528906824.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:24.741Z,1528906824.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:24.775Z,1528906824.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:25.131Z,1528906825.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:25.148Z,1528906825.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:25.527Z,1528906825.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:25.552Z,1528906825.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:25.928Z,1528906825.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:25.945Z,1528906825.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:26.335Z,1528906826.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:26.369Z,1528906826.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:26.741Z,1528906826.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:26.775Z,1528906826.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:27.142Z,1528906827.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:27.180Z,1528906827.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:27.542Z,1528906827.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:27.560Z,1528906827.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:27.933Z,1528906827.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:27.951Z,1528906827.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:28.334Z,1528906828.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:28.352Z,1528906828.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:28.732Z,1528906828.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:28.750Z,1528906828.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:29.134Z,1528906829.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:29.152Z,1528906829.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:29.527Z,1528906829.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:29.550Z,1528906829.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:29.941Z,1528906829.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:29.960Z,1528906829.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:30.342Z,1528906830.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:30.360Z,1528906830.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:30.734Z,1528906830.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:30.752Z,1528906830.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:31.132Z,1528906831.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:31.150Z,1528906831.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:31.532Z,1528906831.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:31.564Z,1528906831.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:31.930Z,1528906831.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:31.948Z,1528906831.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:32.330Z,1528906832.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:32.357Z,1528906832.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:32.742Z,1528906832.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:32.759Z,1528906832.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:33.137Z,1528906833.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:33.155Z,1528906833.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:33.541Z,1528906833.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:33.559Z,1528906833.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:33.932Z,1528906833.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:33.962Z,1528906833.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:34.334Z,1528906834.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:34.352Z,1528906834.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:34.731Z,1528906834.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:34.762Z,1528906834.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:35.133Z,1528906835.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:35.165Z,1528906835.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:35.530Z,1528906835.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:35.548Z,1528906835.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:35.936Z,1528906835.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:35.971Z,1528906835.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:36.343Z,1528906836.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:36.368Z,1528906836.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:36.746Z,1528906836.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:36.763Z,1528906836.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:37.131Z,1528906837.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:37.155Z,1528906837.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:37.535Z,1528906837.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:37.553Z,1528906837.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:37.928Z,1528906837.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:37.962Z,1528906837.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:38.328Z,1528906838.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:38.363Z,1528906838.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:38.746Z,1528906838.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:38.779Z,1528906838.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:39.150Z,1528906839.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:39.176Z,1528906839.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:39.544Z,1528906839.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:39.562Z,1528906839.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:39.928Z,1528906839.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:39.968Z,1528906839.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:40.323Z,1528906840.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:40.364Z,1528906840.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:40.727Z,1528906840.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:40.757Z,1528906840.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:41.128Z,1528906841.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:41.158Z,1528906841.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:41.523Z,1528906841.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:41.541Z,1528906841.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:41.938Z,1528906841.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:41.976Z,1528906841.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:42.341Z,1528906842.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:42.371Z,1528906842.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:42.737Z,1528906842.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:42.772Z,1528906842.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:43.127Z,1528906843.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:43.144Z,1528906843.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:43.531Z,1528906843.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:43.549Z,1528906843.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:43.926Z,1528906843.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:43.944Z,1528906843.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:44.330Z,1528906844.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:44.348Z,1528906844.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:44.741Z,1528906844.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:44.779Z,1528906844.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:45.141Z,1528906845.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:45.175Z,1528906845.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:45.541Z,1528906845.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:45.559Z,1528906845.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:45.933Z,1528906845.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:45.951Z,1528906845.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:46.326Z,1528906846.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:46.356Z,1528906846.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:46.733Z,1528906846.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:46.751Z,1528906846.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:47.132Z,1528906847.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:47.162Z,1528906847.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:47.534Z,1528906847.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:47.551Z,1528906847.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:47.938Z,1528906847.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:47.956Z,1528906847.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:48.345Z,1528906848.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:48.363Z,1528906848.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:48.738Z,1528906848.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:48.764Z,1528906848.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:49.133Z,1528906849.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:49.150Z,1528906849.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:49.526Z,1528906849.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:49.556Z,1528906849.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:49.933Z,1528906849.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:49.950Z,1528906849.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:50.331Z,1528906850.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:50.353Z,1528906850.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:50.743Z,1528906850.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:50.760Z,1528906850.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:51.141Z,1528906851.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:51.159Z,1528906851.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:51.542Z,1528906851.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:51.564Z,1528906851.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:51.934Z,1528906851.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:51.952Z,1528906851.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:52.327Z,1528906852.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:52.351Z,1528906852.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:52.725Z,1528906852.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:52.757Z,1528906852.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:53.132Z,1528906853.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:53.163Z,1528906853.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:53.533Z,1528906853.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:53.552Z,1528906853.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:53.942Z,1528906853.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:53.960Z,1528906853.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:54.347Z,1528906854.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:54.365Z,1528906854.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:54.743Z,1528906854.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:54.760Z,1528906854.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:55.131Z,1528906855.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:55.161Z,1528906855.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:55.527Z,1528906855.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:55.566Z,1528906855.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:55.927Z,1528906855.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:55.959Z,1528906855.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:56.328Z,1528906856.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:56.363Z,1528906856.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:56.747Z,1528906856.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:56.765Z,1528906856.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:57.147Z,1528906857.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:57.164Z,1528906857.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:57.543Z,1528906857.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:57.561Z,1528906857.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:57.927Z,1528906857.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:57.960Z,1528906857.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:58.328Z,1528906858.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:58.362Z,1528906858.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:58.727Z,1528906858.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:58.756Z,1528906858.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:59.128Z,1528906859.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:59.162Z,1528906859.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:59.527Z,1528906859.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:59.545Z,1528906859.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:20:59.945Z,1528906859.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:20:59.972Z,1528906859.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:00.346Z,1528906860.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:00.375Z,1528906860.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:00.745Z,1528906860.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:00.772Z,1528906860.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:01.131Z,1528906861.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:01.149Z,1528906861.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:01.531Z,1528906861.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:01.549Z,1528906861.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:01.927Z,1528906861.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:01.945Z,1528906861.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:02.330Z,1528906862.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:02.348Z,1528906862.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:02.741Z,1528906862.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:02.779Z,1528906862.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:03.141Z,1528906863.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:03.175Z,1528906863.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:03.541Z,1528906863.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:03.559Z,1528906863.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:03.934Z,1528906863.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:03.952Z,1528906863.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:04.333Z,1528906864.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:04.351Z,1528906864.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:04.733Z,1528906864.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:04.751Z,1528906864.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:05.136Z,1528906865.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:05.154Z,1528906865.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:05.529Z,1528906865.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:05.547Z,1528906865.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:05.938Z,1528906865.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:05.956Z,1528906865.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:06.342Z,1528906866.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:06.360Z,1528906866.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:06.738Z,1528906866.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:06.756Z,1528906866.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:07.132Z,1528906867.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:07.157Z,1528906867.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:07.534Z,1528906867.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:07.552Z,1528906867.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:07.928Z,1528906867.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:07.954Z,1528906867.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:08.334Z,1528906868.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:08.352Z,1528906868.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:08.741Z,1528906868.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:08.760Z,1528906868.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:09.141Z,1528906869.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:09.159Z,1528906869.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:09.545Z,1528906869.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:09.563Z,1528906869.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:09.934Z,1528906869.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:09.953Z,1528906869.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:13.042Z,1528906873.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:13.060Z,1528906873.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:13.192Z,1528906873.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:13.239Z,1528906873.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:13.598Z,1528906873.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:13.636Z,1528906873.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:13.998Z,1528906873.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:14.061Z,1528906874.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:14.390Z,1528906874.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:14.407Z,1528906874.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:14.778Z,1528906874.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:14.812Z,1528906874.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:15.186Z,1528906875.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:15.203Z,1528906875.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:15.584Z,1528906875.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:15.602Z,1528906875.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:15.994Z,1528906875.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:16.012Z,1528906876.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:16.390Z,1528906876.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:16.412Z,1528906876.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:16.790Z,1528906876.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:16.812Z,1528906876.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:17.186Z,1528906877.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:17.203Z,1528906877.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:17.579Z,1528906877.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:17.602Z,1528906877.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:17.978Z,1528906877.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:18.004Z,1528906878.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:18.383Z,1528906878.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:18.407Z,1528906878.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:18.795Z,1528906878.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:18.813Z,1528906878.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:19.195Z,1528906879.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:19.212Z,1528906879.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:19.593Z,1528906879.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:19.624Z,1528906879.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:19.975Z,1528906879.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:20.012Z,1528906880.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:20.383Z,1528906880.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:20.407Z,1528906880.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:20.787Z,1528906880.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:20.810Z,1528906880.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:21.176Z,1528906881.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:21.218Z,1528906881.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:21.590Z,1528906881.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:21.612Z,1528906881.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:21.998Z,1528906881.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:22.020Z,1528906882.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:22.396Z,1528906882.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:22.420Z,1528906882.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:22.797Z,1528906882.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:22.815Z,1528906882.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:23.176Z,1528906883.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:23.210Z,1528906883.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:23.575Z,1528906883.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:23.612Z,1528906883.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:23.980Z,1528906883.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:24.015Z,1528906884.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:24.375Z,1528906884.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:24.402Z,1528906884.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:24.790Z,1528906884.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:24.819Z,1528906884.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:25.201Z,1528906885.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:25.222Z,1528906885.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:25.589Z,1528906885.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:25.620Z,1528906885.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:25.975Z,1528906885.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:25.992Z,1528906885.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:26.379Z,1528906886.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:26.396Z,1528906886.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:26.775Z,1528906886.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:26.792Z,1528906886.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:27.178Z,1528906887.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:27.196Z,1528906887.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:27.583Z,1528906887.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:27.628Z,1528906887.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:27.989Z,1528906887.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:28.007Z,1528906888.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:28.389Z,1528906888.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:28.407Z,1528906888.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:28.793Z,1528906888.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:28.811Z,1528906888.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:29.184Z,1528906889.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:29.202Z,1528906889.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:29.579Z,1528906889.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:29.602Z,1528906889.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:29.984Z,1528906889.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:30.002Z,1528906890.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:30.382Z,1528906890.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:30.400Z,1528906890.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:30.786Z,1528906890.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:30.808Z,1528906890.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:31.193Z,1528906891.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:31.211Z,1528906891.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:31.593Z,1528906891.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:31.611Z,1528906891.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:31.984Z,1528906891.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:32.008Z,1528906892.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:32.384Z,1528906892.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:32.402Z,1528906892.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:32.782Z,1528906892.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:32.804Z,1528906892.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:33.182Z,1528906893.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:33.200Z,1528906893.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:33.584Z,1528906893.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:33.608Z,1528906893.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:33.993Z,1528906893.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:34.011Z,1528906894.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:34.389Z,1528906894.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:34.408Z,1528906894.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:34.789Z,1528906894.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:34.807Z,1528906894.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:35.182Z,1528906895.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:35.204Z,1528906895.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:35.579Z,1528906895.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:35.601Z,1528906895.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:35.984Z,1528906895.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:36.002Z,1528906896.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:36.381Z,1528906896.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:36.404Z,1528906896.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:36.786Z,1528906896.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:36.808Z,1528906896.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:37.193Z,1528906897.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:37.211Z,1528906897.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:37.589Z,1528906897.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:37.612Z,1528906897.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:37.984Z,1528906897.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:38.002Z,1528906898.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:38.384Z,1528906898.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:38.402Z,1528906898.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:38.784Z,1528906898.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:38.801Z,1528906898.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:39.184Z,1528906899.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:39.206Z,1528906899.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:39.583Z,1528906899.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:39.600Z,1528906899.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:39.989Z,1528906899.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:40.012Z,1528906900.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:40.393Z,1528906900.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:40.411Z,1528906900.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:40.790Z,1528906900.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:40.807Z,1528906900.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:41.185Z,1528906901.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:41.203Z,1528906901.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:41.582Z,1528906901.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:41.599Z,1528906901.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:41.986Z,1528906901.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:42.004Z,1528906902.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:42.381Z,1528906902.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:42.399Z,1528906902.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:42.790Z,1528906902.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:42.808Z,1528906902.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:43.193Z,1528906903.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:43.211Z,1528906903.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:43.593Z,1528906903.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:43.616Z,1528906903.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:43.984Z,1528906903.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:44.002Z,1528906904.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:44.383Z,1528906904.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:44.400Z,1528906904.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:44.784Z,1528906904.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:44.802Z,1528906904.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:45.185Z,1528906905.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:45.207Z,1528906905.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:45.583Z,1528906905.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:45.605Z,1528906905.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:45.995Z,1528906905.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:46.020Z,1528906906.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:46.394Z,1528906906.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:46.416Z,1528906906.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:46.795Z,1528906906.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:46.812Z,1528906906.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:47.186Z,1528906907.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:47.203Z,1528906907.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:47.585Z,1528906907.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:47.603Z,1528906907.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:47.983Z,1528906907.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:48.007Z,1528906908.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:48.390Z,1528906908.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:48.408Z,1528906908.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:48.795Z,1528906908.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:48.820Z,1528906908.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:49.194Z,1528906909.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:49.216Z,1528906909.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:49.595Z,1528906909.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:49.620Z,1528906909.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:49.986Z,1528906909.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:50.004Z,1528906910.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:50.383Z,1528906910.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:50.406Z,1528906910.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:50.787Z,1528906910.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:50.810Z,1528906910.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:51.186Z,1528906911.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:51.208Z,1528906911.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:51.583Z,1528906911.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:51.607Z,1528906911.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:51.995Z,1528906911.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:52.013Z,1528906912.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:52.394Z,1528906912.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:52.416Z,1528906912.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:52.794Z,1528906912.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:52.813Z,1528906912.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:53.182Z,1528906913.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:53.199Z,1528906913.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:53.586Z,1528906913.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:53.604Z,1528906913.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:53.983Z,1528906913.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:54.006Z,1528906914.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:54.383Z,1528906914.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:54.407Z,1528906914.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:54.794Z,1528906914.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:54.812Z,1528906914.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:55.194Z,1528906915.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:55.216Z,1528906915.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:55.596Z,1528906915.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:55.620Z,1528906915.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:55.985Z,1528906915.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:56.003Z,1528906916.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:56.383Z,1528906916.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:56.414Z,1528906916.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:56.786Z,1528906916.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:56.803Z,1528906916.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:57.185Z,1528906917.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:57.203Z,1528906917.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:57.583Z,1528906917.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:57.606Z,1528906917.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:57.995Z,1528906917.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:58.020Z,1528906918.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:58.398Z,1528906918.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:58.415Z,1528906918.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:58.794Z,1528906918.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:58.812Z,1528906918.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:59.186Z,1528906919.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:59.209Z,1528906919.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:59.585Z,1528906919.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:21:59.603Z,1528906919.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:21:59.983Z,1528906919.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:00.007Z,1528906920.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:00.384Z,1528906920.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:00.413Z,1528906920.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:00.794Z,1528906920.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:00.812Z,1528906920.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:01.197Z,1528906921.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:01.220Z,1528906921.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:01.597Z,1528906921.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:01.616Z,1528906921.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:01.978Z,1528906921.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:02.011Z,1528906922.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:02.383Z,1528906922.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:02.408Z,1528906922.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:02.787Z,1528906922.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:02.805Z,1528906922.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:03.187Z,1528906923.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:03.205Z,1528906923.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:03.583Z,1528906923.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:03.606Z,1528906923.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:03.995Z,1528906923.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:04.020Z,1528906924.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:04.395Z,1528906924.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:04.417Z,1528906924.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:04.794Z,1528906924.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:04.812Z,1528906924.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:05.187Z,1528906925.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:05.206Z,1528906925.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:05.585Z,1528906925.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:05.603Z,1528906925.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:05.983Z,1528906925.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:06.007Z,1528906926.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:06.383Z,1528906926.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:06.407Z,1528906926.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:06.791Z,1528906926.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:06.809Z,1528906926.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:07.193Z,1528906927.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:07.216Z,1528906927.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:07.595Z,1528906927.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:07.612Z,1528906927.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:07.981Z,1528906927.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:07.999Z,1528906927.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:08.383Z,1528906928.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:08.405Z,1528906928.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:08.786Z,1528906928.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:08.803Z,1528906928.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:09.186Z,1528906929.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:09.204Z,1528906929.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:09.589Z,1528906929.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:09.606Z,1528906929.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:09.998Z,1528906929.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:10.016Z,1528906930.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:10.398Z,1528906930.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:10.415Z,1528906930.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:10.794Z,1528906930.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:10.816Z,1528906930.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:11.190Z,1528906931.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:11.208Z,1528906931.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:11.578Z,1528906931.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:11.603Z,1528906931.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:11.990Z,1528906931.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:12.012Z,1528906932.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:12.390Z,1528906932.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:12.412Z,1528906932.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:12.795Z,1528906932.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:12.812Z,1528906932.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:13.197Z,1528906933.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:13.215Z,1528906933.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:13.597Z,1528906933.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:13.615Z,1528906933.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:16.698Z,1528906936.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:16.716Z,1528906936.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:16.850Z,1528906936.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:16.895Z,1528906936.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:17.257Z,1528906937.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:17.296Z,1528906937.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:17.653Z,1528906937.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:17.671Z,1528906937.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:18.050Z,1528906938.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:18.067Z,1528906938.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:18.442Z,1528906938.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:18.460Z,1528906938.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:18.845Z,1528906938.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:18.863Z,1528906938.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:19.244Z,1528906939.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:19.262Z,1528906939.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:19.645Z,1528906939.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:19.663Z,1528906939.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:20.050Z,1528906940.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:20.068Z,1528906940.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:20.453Z,1528906940.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:20.471Z,1528906940.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:20.853Z,1528906940.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:20.871Z,1528906940.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:21.244Z,1528906941.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:21.268Z,1528906941.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:21.645Z,1528906941.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:21.662Z,1528906941.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:22.046Z,1528906942.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:22.064Z,1528906942.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:22.444Z,1528906942.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:22.463Z,1528906942.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:22.857Z,1528906942.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:22.891Z,1528906942.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:23.253Z,1528906943.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:23.271Z,1528906943.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:23.646Z,1528906943.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:23.668Z,1528906943.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:24.044Z,1528906944.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:24.068Z,1528906944.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:24.445Z,1528906944.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:24.463Z,1528906944.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:24.840Z,1528906944.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:24.871Z,1528906944.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:25.244Z,1528906945.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:25.264Z,1528906945.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:25.643Z,1528906945.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:25.676Z,1528906945.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:26.050Z,1528906946.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:26.068Z,1528906946.068 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:26.068Z,1528906946.068 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 258
2018-06-13T16:22:26.068Z,1528906946.068 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:22:26.070Z,1528906946.070 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:26.070Z,1528906946.070 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 258
2018-06-13T16:22:26.070Z,1528906946.070 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:22:26.072Z,1528906946.072 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:26.072Z,1528906946.072 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 258
2018-06-13T16:22:26.072Z,1528906946.072 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:22:26.161Z,1528906946.161 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:22:26.161Z,1528906946.161 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:22:26.162Z,1528906946.162 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:22:26.457Z,1528906946.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:26.569Z,1528906946.569 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:22:26.569Z,1528906946.569 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 258
2018-06-13T16:22:26.570Z,1528906946.570 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:22:26.570Z,1528906946.570 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 258
2018-06-13T16:22:26.570Z,1528906946.570 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:22:26.570Z,1528906946.570 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 258
2018-06-13T16:22:26.859Z,1528906946.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:26.893Z,1528906946.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:22:26.893Z,1528906946.893 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:22:26.893Z,1528906946.893 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:22:26.894Z,1528906946.894 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:22:26.894Z,1528906946.894 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:22:26.894Z,1528906946.894 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:22:26.895Z,1528906946.895 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:22:26.895Z,1528906946.895 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:22:26.896Z,1528906946.896 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:22:27.239Z,1528906947.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:27.277Z,1528906947.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:22:27.281Z,1528906947.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:27.639Z,1528906947.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:27.672Z,1528906947.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:22:27.677Z,1528906947.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:28.039Z,1528906948.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:28.056Z,1528906948.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:22:28.073Z,1528906948.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:28.439Z,1528906948.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:28.456Z,1528906948.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:22:28.457Z,1528906948.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:28.853Z,1528906948.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:28.889Z,1528906948.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:22:28.890Z,1528906948.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:29.257Z,1528906949.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:29.285Z,1528906949.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:22:29.286Z,1528906949.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:29.657Z,1528906949.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:29.684Z,1528906949.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:22:29.685Z,1528906949.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:30.043Z,1528906950.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:30.060Z,1528906950.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:22:30.061Z,1528906950.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:30.443Z,1528906950.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:30.460Z,1528906950.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:22:30.461Z,1528906950.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:30.847Z,1528906950.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:30.864Z,1528906950.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:22:30.866Z,1528906950.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:31.243Z,1528906951.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:31.260Z,1528906951.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:22:31.261Z,1528906951.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:31.643Z,1528906951.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:31.668Z,1528906951.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:22:31.669Z,1528906951.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:32.046Z,1528906952.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:32.064Z,1528906952.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:22:32.065Z,1528906952.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:32.453Z,1528906952.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:32.471Z,1528906952.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:22:32.471Z,1528906952.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:32.854Z,1528906952.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:32.871Z,1528906952.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:22:32.872Z,1528906952.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:33.245Z,1528906953.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:33.268Z,1528906953.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:22:33.269Z,1528906953.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:33.649Z,1528906953.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:33.667Z,1528906953.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:22:33.668Z,1528906953.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:34.039Z,1528906954.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:34.073Z,1528906954.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:22:34.074Z,1528906954.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:34.440Z,1528906954.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:34.466Z,1528906954.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:22:34.467Z,1528906954.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:34.854Z,1528906954.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:34.871Z,1528906954.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:22:34.872Z,1528906954.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:35.254Z,1528906955.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:35.289Z,1528906955.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:22:35.290Z,1528906955.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:35.649Z,1528906955.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:35.680Z,1528906955.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:22:35.689Z,1528906955.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:36.043Z,1528906956.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:36.076Z,1528906956.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:22:36.081Z,1528906956.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:36.443Z,1528906956.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:36.477Z,1528906956.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:22:36.478Z,1528906956.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:36.835Z,1528906956.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:36.864Z,1528906956.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:22:36.870Z,1528906956.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:37.240Z,1528906957.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:37.275Z,1528906957.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:22:37.276Z,1528906957.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:37.639Z,1528906957.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:37.672Z,1528906957.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:22:37.677Z,1528906957.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:38.049Z,1528906958.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:38.077Z,1528906958.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:22:38.078Z,1528906958.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:38.454Z,1528906958.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:38.488Z,1528906958.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:22:38.488Z,1528906958.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:38.853Z,1528906958.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:38.893Z,1528906958.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:22:38.894Z,1528906958.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:39.239Z,1528906959.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:39.279Z,1528906959.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:22:39.280Z,1528906959.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:39.639Z,1528906959.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:39.679Z,1528906959.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:22:39.679Z,1528906959.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:40.040Z,1528906960.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:40.074Z,1528906960.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:22:40.075Z,1528906960.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:40.439Z,1528906960.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:40.484Z,1528906960.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:22:40.485Z,1528906960.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:40.853Z,1528906960.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:40.887Z,1528906960.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:22:40.888Z,1528906960.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:41.257Z,1528906961.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:41.286Z,1528906961.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:22:41.287Z,1528906961.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:41.657Z,1528906961.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:41.684Z,1528906961.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:22:41.685Z,1528906961.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:42.043Z,1528906962.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:42.060Z,1528906962.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:22:42.061Z,1528906962.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:42.442Z,1528906962.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:42.460Z,1528906962.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:22:42.461Z,1528906962.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:42.845Z,1528906962.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:42.862Z,1528906962.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:22:42.863Z,1528906962.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:43.244Z,1528906963.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:43.268Z,1528906963.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:22:43.269Z,1528906963.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:43.646Z,1528906963.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:43.663Z,1528906963.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:22:43.664Z,1528906963.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:44.047Z,1528906964.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:44.065Z,1528906964.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:22:44.066Z,1528906964.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:44.453Z,1528906964.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:44.470Z,1528906964.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:22:44.471Z,1528906964.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:44.853Z,1528906964.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:44.871Z,1528906964.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:22:44.872Z,1528906964.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:45.245Z,1528906965.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:45.263Z,1528906965.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:22:45.264Z,1528906965.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:45.645Z,1528906965.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:45.662Z,1528906965.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T16:22:45.663Z,1528906965.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:46.047Z,1528906966.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:46.065Z,1528906966.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T16:22:46.066Z,1528906966.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:46.439Z,1528906966.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:46.471Z,1528906966.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:46.857Z,1528906966.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:46.875Z,1528906966.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:47.253Z,1528906967.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:47.271Z,1528906967.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:47.650Z,1528906967.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:47.667Z,1528906967.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:48.047Z,1528906968.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:48.064Z,1528906968.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:48.446Z,1528906968.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:48.464Z,1528906968.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:48.839Z,1528906968.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:48.872Z,1528906968.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:49.243Z,1528906969.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:49.264Z,1528906969.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:49.645Z,1528906969.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:49.664Z,1528906969.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:50.050Z,1528906970.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:50.069Z,1528906970.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:50.453Z,1528906970.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:50.476Z,1528906970.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:50.857Z,1528906970.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:50.896Z,1528906970.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:51.245Z,1528906971.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:51.263Z,1528906971.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:51.643Z,1528906971.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:51.665Z,1528906971.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:52.047Z,1528906972.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:52.065Z,1528906972.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:52.445Z,1528906972.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:52.463Z,1528906972.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:52.851Z,1528906972.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:52.870Z,1528906972.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:53.253Z,1528906973.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:53.271Z,1528906973.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:53.650Z,1528906973.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:53.668Z,1528906973.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:54.043Z,1528906974.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:54.074Z,1528906974.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:54.443Z,1528906974.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:54.475Z,1528906974.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:54.850Z,1528906974.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:54.876Z,1528906974.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:55.253Z,1528906975.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:55.271Z,1528906975.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:55.653Z,1528906975.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:55.671Z,1528906975.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:56.039Z,1528906976.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:56.062Z,1528906976.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:56.443Z,1528906976.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:56.465Z,1528906976.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:56.853Z,1528906976.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:56.872Z,1528906976.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:57.253Z,1528906977.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:57.271Z,1528906977.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:57.650Z,1528906977.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:57.668Z,1528906977.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:58.046Z,1528906978.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:58.064Z,1528906978.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:58.439Z,1528906978.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:58.462Z,1528906978.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:58.850Z,1528906978.850 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:58.872Z,1528906978.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:59.253Z,1528906979.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:59.271Z,1528906979.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:22:59.651Z,1528906979.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:22:59.669Z,1528906979.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:00.043Z,1528906980.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:00.074Z,1528906980.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:00.443Z,1528906980.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:00.480Z,1528906980.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:00.854Z,1528906980.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:00.872Z,1528906980.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:01.254Z,1528906981.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:01.272Z,1528906981.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:01.654Z,1528906981.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:01.673Z,1528906981.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:02.046Z,1528906982.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:02.063Z,1528906982.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:02.446Z,1528906982.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:02.463Z,1528906982.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:02.855Z,1528906982.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:02.873Z,1528906982.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:03.254Z,1528906983.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:03.271Z,1528906983.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:03.654Z,1528906983.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:03.671Z,1528906983.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:04.046Z,1528906984.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:04.064Z,1528906984.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:04.446Z,1528906984.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:04.468Z,1528906984.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:04.854Z,1528906984.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:04.872Z,1528906984.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:05.257Z,1528906985.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:05.275Z,1528906985.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:05.650Z,1528906985.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:05.668Z,1528906985.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:06.045Z,1528906986.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:06.062Z,1528906986.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:06.443Z,1528906986.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:06.469Z,1528906986.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:06.854Z,1528906986.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:06.872Z,1528906986.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:07.254Z,1528906987.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:07.276Z,1528906987.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:07.654Z,1528906987.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:07.672Z,1528906987.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:08.039Z,1528906988.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:08.063Z,1528906988.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:08.443Z,1528906988.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:08.465Z,1528906988.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:08.855Z,1528906988.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:08.873Z,1528906988.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:09.254Z,1528906989.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:09.276Z,1528906989.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:09.654Z,1528906989.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:09.672Z,1528906989.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:10.051Z,1528906990.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:10.069Z,1528906990.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:13.159Z,1528906993.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:13.184Z,1528906993.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:13.334Z,1528906993.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:13.377Z,1528906993.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:13.729Z,1528906993.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:13.756Z,1528906993.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:14.142Z,1528906994.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:14.160Z,1528906994.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:14.515Z,1528906994.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:14.550Z,1528906994.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:14.918Z,1528906994.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:14.936Z,1528906994.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:15.315Z,1528906995.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:15.336Z,1528906995.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:15.718Z,1528906995.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:15.736Z,1528906995.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:16.129Z,1528906996.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:16.167Z,1528906996.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:16.529Z,1528906996.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:16.564Z,1528906996.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:16.921Z,1528906996.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:16.939Z,1528906996.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:17.319Z,1528906997.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:17.337Z,1528906997.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:17.715Z,1528906997.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:17.745Z,1528906997.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:18.119Z,1528906998.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:18.151Z,1528906998.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:18.519Z,1528906998.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:18.545Z,1528906998.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:18.928Z,1528906998.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:18.946Z,1528906998.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:19.331Z,1528906999.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:19.349Z,1528906999.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:19.731Z,1528906999.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:19.756Z,1528906999.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:20.115Z,1528907000.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:20.139Z,1528907000.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:20.521Z,1528907000.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:20.539Z,1528907000.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:20.926Z,1528907000.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:20.952Z,1528907000.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:21.323Z,1528907001.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:21.341Z,1528907001.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:21.719Z,1528907001.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:21.742Z,1528907001.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:22.134Z,1528907002.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:22.152Z,1528907002.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:22.531Z,1528907002.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:22.549Z,1528907002.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:22.931Z,1528907002.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:22.948Z,1528907002.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:23.327Z,1528907003.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:23.345Z,1528907003.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:23.721Z,1528907003.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:23.739Z,1528907003.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:24.123Z,1528907004.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:24.141Z,1528907004.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:24.519Z,1528907004.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:24.545Z,1528907004.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:24.928Z,1528907004.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:24.952Z,1528907004.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:25.330Z,1528907005.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:25.348Z,1528907005.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:25.731Z,1528907005.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:25.749Z,1528907005.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:26.121Z,1528907006.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:26.144Z,1528907006.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:26.520Z,1528907006.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:26.638Z,1528907006.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:26.919Z,1528907006.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:26.945Z,1528907006.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:27.315Z,1528907007.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:27.339Z,1528907007.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:27.719Z,1528907007.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:27.741Z,1528907007.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:28.131Z,1528907008.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:28.150Z,1528907008.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:28.534Z,1528907008.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:28.556Z,1528907008.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:28.935Z,1528907008.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:28.952Z,1528907008.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:29.322Z,1528907009.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:29.340Z,1528907009.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:29.711Z,1528907009.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:29.747Z,1528907009.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:30.119Z,1528907010.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:30.153Z,1528907010.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:30.515Z,1528907010.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:30.556Z,1528907010.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:30.933Z,1528907010.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:30.951Z,1528907010.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:31.336Z,1528907011.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:31.354Z,1528907011.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:31.737Z,1528907011.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:31.755Z,1528907011.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:32.111Z,1528907012.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:32.138Z,1528907012.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:32.514Z,1528907012.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:32.532Z,1528907012.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:32.918Z,1528907012.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:32.948Z,1528907012.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:33.319Z,1528907013.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:33.337Z,1528907013.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:33.719Z,1528907013.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:33.737Z,1528907013.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:34.130Z,1528907014.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:34.164Z,1528907014.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:34.526Z,1528907014.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:34.548Z,1528907014.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:34.930Z,1528907014.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:34.968Z,1528907014.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:35.318Z,1528907015.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:35.336Z,1528907015.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:35.716Z,1528907015.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:35.748Z,1528907015.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:36.119Z,1528907016.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:36.152Z,1528907016.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:36.521Z,1528907016.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:36.540Z,1528907016.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:36.926Z,1528907016.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:36.944Z,1528907016.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:37.329Z,1528907017.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:37.348Z,1528907017.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:37.726Z,1528907017.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:37.746Z,1528907017.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:38.115Z,1528907018.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:38.138Z,1528907018.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:38.524Z,1528907018.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:38.542Z,1528907018.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:38.921Z,1528907018.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:38.939Z,1528907018.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:39.315Z,1528907019.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:39.338Z,1528907019.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:39.719Z,1528907019.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:39.741Z,1528907019.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:40.126Z,1528907020.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:40.144Z,1528907020.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:40.526Z,1528907020.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:40.548Z,1528907020.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:40.926Z,1528907020.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:40.948Z,1528907020.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:41.318Z,1528907021.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:41.336Z,1528907021.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:41.715Z,1528907021.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:41.738Z,1528907021.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:42.119Z,1528907022.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:42.150Z,1528907022.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:42.518Z,1528907022.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:42.536Z,1528907022.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:42.926Z,1528907022.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:42.948Z,1528907022.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:43.333Z,1528907023.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:43.351Z,1528907023.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:43.726Z,1528907023.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:43.744Z,1528907023.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:44.115Z,1528907024.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:44.139Z,1528907024.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:44.519Z,1528907024.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:44.552Z,1528907024.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:44.930Z,1528907024.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:44.948Z,1528907024.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:45.331Z,1528907025.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:45.349Z,1528907025.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:45.730Z,1528907025.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:45.747Z,1528907025.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:46.122Z,1528907026.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:46.140Z,1528907026.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:46.515Z,1528907026.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:46.538Z,1528907026.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:46.930Z,1528907026.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:46.952Z,1528907026.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:47.331Z,1528907027.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:47.348Z,1528907027.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:47.727Z,1528907027.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:47.752Z,1528907027.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:48.119Z,1528907028.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:48.143Z,1528907028.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:48.521Z,1528907028.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:48.539Z,1528907028.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:48.927Z,1528907028.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:48.952Z,1528907028.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:49.330Z,1528907029.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:49.349Z,1528907029.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:49.731Z,1528907029.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:49.748Z,1528907029.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:50.123Z,1528907030.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:50.148Z,1528907030.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:50.519Z,1528907030.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:50.541Z,1528907030.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:50.930Z,1528907030.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:50.948Z,1528907030.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:51.330Z,1528907031.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:51.352Z,1528907031.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:51.730Z,1528907031.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:51.747Z,1528907031.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:52.123Z,1528907032.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:52.141Z,1528907032.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:52.521Z,1528907032.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:52.539Z,1528907032.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:52.930Z,1528907032.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:52.948Z,1528907032.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:53.331Z,1528907033.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:53.348Z,1528907033.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:53.731Z,1528907033.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:53.748Z,1528907033.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:54.119Z,1528907034.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:54.144Z,1528907034.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:54.521Z,1528907034.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:54.539Z,1528907034.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:54.930Z,1528907034.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:54.948Z,1528907034.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:55.330Z,1528907035.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:55.352Z,1528907035.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:55.734Z,1528907035.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:55.756Z,1528907035.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:56.121Z,1528907036.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:56.139Z,1528907036.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:56.519Z,1528907036.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:56.553Z,1528907036.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:56.937Z,1528907036.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:56.954Z,1528907036.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:57.335Z,1528907037.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:57.353Z,1528907037.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:57.731Z,1528907037.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:57.749Z,1528907037.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:58.116Z,1528907038.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:58.148Z,1528907038.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:58.515Z,1528907038.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:58.548Z,1528907038.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:58.930Z,1528907038.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:58.962Z,1528907038.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:59.336Z,1528907039.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:59.360Z,1528907039.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:23:59.736Z,1528907039.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:23:59.754Z,1528907039.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:00.116Z,1528907040.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:00.150Z,1528907040.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:00.515Z,1528907040.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:00.552Z,1528907040.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:00.932Z,1528907040.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:00.956Z,1528907040.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:01.336Z,1528907041.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:01.353Z,1528907041.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:01.736Z,1528907041.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:01.764Z,1528907041.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:02.116Z,1528907042.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:02.148Z,1528907042.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:02.511Z,1528907042.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:02.548Z,1528907042.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:02.937Z,1528907042.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:02.954Z,1528907042.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:03.339Z,1528907043.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:03.356Z,1528907043.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:03.732Z,1528907043.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:03.751Z,1528907043.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:04.112Z,1528907044.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:04.145Z,1528907044.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:04.515Z,1528907044.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:04.543Z,1528907044.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:04.932Z,1528907044.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:04.950Z,1528907044.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:05.336Z,1528907045.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:05.356Z,1528907045.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:05.732Z,1528907045.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:05.757Z,1528907045.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:06.116Z,1528907046.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:06.146Z,1528907046.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:06.515Z,1528907046.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:06.549Z,1528907046.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:06.932Z,1528907046.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:06.950Z,1528907046.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:07.335Z,1528907047.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:07.352Z,1528907047.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:07.732Z,1528907047.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:07.750Z,1528907047.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:08.111Z,1528907048.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:08.145Z,1528907048.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:08.515Z,1528907048.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:08.549Z,1528907048.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:08.915Z,1528907048.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:08.932Z,1528907048.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:09.329Z,1528907049.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:09.364Z,1528907049.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:09.741Z,1528907049.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:09.758Z,1528907049.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:10.140Z,1528907050.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:10.158Z,1528907050.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:13.232Z,1528907053.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:13.258Z,1528907053.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:13.374Z,1528907053.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:13.416Z,1528907053.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:13.792Z,1528907053.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:13.816Z,1528907053.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:14.192Z,1528907054.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:14.210Z,1528907054.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:14.578Z,1528907054.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:14.605Z,1528907054.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:14.967Z,1528907054.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:15.012Z,1528907055.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:15.372Z,1528907055.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:15.410Z,1528907055.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:15.767Z,1528907055.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:15.784Z,1528907055.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:16.185Z,1528907056.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:16.215Z,1528907056.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:16.586Z,1528907056.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:16.613Z,1528907056.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:16.981Z,1528907056.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:17.019Z,1528907057.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:17.376Z,1528907057.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:17.420Z,1528907057.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:17.768Z,1528907057.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:17.786Z,1528907057.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:18.175Z,1528907058.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:18.193Z,1528907058.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:18.574Z,1528907058.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:18.593Z,1528907058.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:18.978Z,1528907058.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:18.996Z,1528907058.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:19.382Z,1528907059.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:19.400Z,1528907059.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:19.786Z,1528907059.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:19.804Z,1528907059.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:20.173Z,1528907060.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:20.192Z,1528907060.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:20.574Z,1528907060.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:20.592Z,1528907060.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:20.985Z,1528907060.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:21.004Z,1528907061.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:21.378Z,1528907061.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:21.401Z,1528907061.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:21.785Z,1528907061.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:21.804Z,1528907061.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:22.179Z,1528907062.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:22.206Z,1528907062.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:22.573Z,1528907062.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:22.590Z,1528907062.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:22.981Z,1528907062.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:22.000Z,1528907063.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:23.386Z,1528907063.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:23.433Z,1528907063.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:23.778Z,1528907063.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:23.801Z,1528907063.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:24.178Z,1528907064.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:24.196Z,1528907064.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:24.577Z,1528907064.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:24.595Z,1528907064.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:24.978Z,1528907064.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:24.996Z,1528907064.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:25.378Z,1528907065.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:25.401Z,1528907065.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:25.785Z,1528907065.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:25.804Z,1528907065.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:26.174Z,1528907066.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:26.199Z,1528907066.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:26.576Z,1528907066.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:26.594Z,1528907066.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:26.985Z,1528907066.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:27.004Z,1528907067.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:27.378Z,1528907067.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:27.401Z,1528907067.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:27.782Z,1528907067.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:27.800Z,1528907067.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:28.177Z,1528907068.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:28.195Z,1528907068.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:28.573Z,1528907068.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:28.590Z,1528907068.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:28.978Z,1528907068.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:28.996Z,1528907068.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:29.385Z,1528907069.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:29.404Z,1528907069.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:29.778Z,1528907069.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:29.801Z,1528907069.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:30.177Z,1528907070.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:30.195Z,1528907070.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:30.576Z,1528907070.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:30.595Z,1528907070.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:30.981Z,1528907070.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:30.000Z,1528907071.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:31.381Z,1528907071.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:31.399Z,1528907071.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:31.785Z,1528907071.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:31.804Z,1528907071.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:32.173Z,1528907072.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:32.191Z,1528907072.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:32.576Z,1528907072.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:32.594Z,1528907072.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:32.986Z,1528907072.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:33.005Z,1528907073.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:33.382Z,1528907073.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:33.400Z,1528907073.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:33.781Z,1528907073.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:33.800Z,1528907073.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:34.178Z,1528907074.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:34.196Z,1528907074.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:34.573Z,1528907074.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:34.590Z,1528907074.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:34.981Z,1528907074.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:35.001Z,1528907075.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:35.385Z,1528907075.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:35.404Z,1528907075.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:35.781Z,1528907075.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:35.800Z,1528907075.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:36.177Z,1528907076.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:36.195Z,1528907076.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:36.574Z,1528907076.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:36.604Z,1528907076.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:36.983Z,1528907076.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:37.002Z,1528907077.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:37.386Z,1528907077.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:37.405Z,1528907077.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:37.787Z,1528907077.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:37.812Z,1528907077.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:38.174Z,1528907078.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:38.191Z,1528907078.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:38.579Z,1528907078.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:38.610Z,1528907078.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:38.991Z,1528907078.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:39.009Z,1528907079.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:39.387Z,1528907079.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:39.406Z,1528907079.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:39.788Z,1528907079.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:39.806Z,1528907079.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:40.171Z,1528907080.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:40.212Z,1528907080.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:40.571Z,1528907080.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:40.599Z,1528907080.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:40.987Z,1528907080.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:41.006Z,1528907081.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:41.388Z,1528907081.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:41.407Z,1528907081.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:41.784Z,1528907081.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:41.805Z,1528907081.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:42.171Z,1528907082.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:42.199Z,1528907082.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:42.572Z,1528907082.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:42.602Z,1528907082.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:42.984Z,1528907082.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:43.002Z,1528907083.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:43.386Z,1528907083.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:43.416Z,1528907083.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:43.788Z,1528907083.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:43.807Z,1528907083.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:44.168Z,1528907084.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:44.205Z,1528907084.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:44.567Z,1528907084.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:44.599Z,1528907084.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:44.989Z,1528907084.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:45.008Z,1528907085.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:45.388Z,1528907085.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:45.407Z,1528907085.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:45.788Z,1528907085.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:45.807Z,1528907085.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:46.168Z,1528907086.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:46.213Z,1528907086.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:46.564Z,1528907086.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:46.602Z,1528907086.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:46.981Z,1528907086.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:47.010Z,1528907087.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:47.381Z,1528907087.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:47.416Z,1528907087.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:47.781Z,1528907087.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:47.810Z,1528907087.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:48.171Z,1528907088.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:48.210Z,1528907088.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:48.567Z,1528907088.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:48.593Z,1528907088.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:48.973Z,1528907088.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:49.007Z,1528907089.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:49.385Z,1528907089.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:49.414Z,1528907089.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:49.785Z,1528907089.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:49.815Z,1528907089.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:50.171Z,1528907090.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:50.188Z,1528907090.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:50.575Z,1528907090.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:50.643Z,1528907090.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:50.981Z,1528907090.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:51.015Z,1528907091.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:51.381Z,1528907091.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:51.425Z,1528907091.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:51.778Z,1528907091.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:51.795Z,1528907091.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:52.175Z,1528907092.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:52.193Z,1528907092.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:52.574Z,1528907092.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:52.591Z,1528907092.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:52.978Z,1528907092.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:52.996Z,1528907092.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:53.382Z,1528907093.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:53.400Z,1528907093.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:53.778Z,1528907093.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:53.804Z,1528907093.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:54.174Z,1528907094.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:54.192Z,1528907094.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:54.572Z,1528907094.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:54.603Z,1528907094.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:54.975Z,1528907094.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:55.001Z,1528907095.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:55.383Z,1528907095.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:55.401Z,1528907095.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:55.787Z,1528907095.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:55.806Z,1528907095.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:56.183Z,1528907096.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:56.211Z,1528907096.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:56.570Z,1528907096.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:56.594Z,1528907096.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:56.979Z,1528907096.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:56.998Z,1528907096.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:57.376Z,1528907097.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:57.394Z,1528907097.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:57.771Z,1528907097.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:57.802Z,1528907097.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:58.186Z,1528907098.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:58.224Z,1528907098.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:58.589Z,1528907098.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:58.608Z,1528907098.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:58.986Z,1528907098.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:59.004Z,1528907099.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:59.367Z,1528907099.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:59.406Z,1528907099.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:24:59.767Z,1528907099.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:24:59.805Z,1528907099.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:00.167Z,1528907100.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:00.197Z,1528907100.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:00.568Z,1528907100.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:00.586Z,1528907100.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:00.966Z,1528907100.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:00.985Z,1528907100.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:01.385Z,1528907101.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:01.414Z,1528907101.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:01.781Z,1528907101.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:01.817Z,1528907101.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:02.186Z,1528907102.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:02.215Z,1528907102.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:02.571Z,1528907102.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:02.589Z,1528907102.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:02.970Z,1528907102.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:02.988Z,1528907102.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:03.370Z,1528907103.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:03.387Z,1528907103.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:03.773Z,1528907103.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:03.791Z,1528907103.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:04.177Z,1528907104.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:04.195Z,1528907104.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:04.581Z,1528907104.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:04.600Z,1528907104.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:04.978Z,1528907104.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:04.995Z,1528907104.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:05.374Z,1528907105.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:05.391Z,1528907105.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:05.772Z,1528907105.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:05.791Z,1528907105.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:06.172Z,1528907106.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:06.190Z,1528907106.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:06.572Z,1528907106.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:06.607Z,1528907106.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:06.973Z,1528907106.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:06.991Z,1528907106.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:07.378Z,1528907107.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:07.396Z,1528907107.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:07.778Z,1528907107.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:07.796Z,1528907107.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:08.178Z,1528907108.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:08.196Z,1528907108.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:08.566Z,1528907108.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:08.596Z,1528907108.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:08.974Z,1528907108.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:08.992Z,1528907108.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:09.373Z,1528907109.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:09.391Z,1528907109.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:09.771Z,1528907109.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:09.801Z,1528907109.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:10.187Z,1528907110.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:10.205Z,1528907110.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:10.587Z,1528907110.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:10.605Z,1528907110.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:10.609Z,1528907110.609 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T16:20:10.3Z
2018-06-13T16:25:10.609Z,1528907110.609 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T16:25:10.609Z,1528907110.609 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T16:25:10.990Z,1528907110.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:11.012Z,1528907111.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:14.919Z,1528907114.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:14.947Z,1528907114.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:15.045Z,1528907115.045 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0300.lzma
2018-06-13T16:25:15.065Z,1528907115.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:15.102Z,1528907115.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:15.483Z,1528907115.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:15.501Z,1528907115.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:15.846Z,1528907115.846 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0300.lzma.bak
2018-06-13T16:25:15.846Z,1528907115.846 [DataOverHttps](INFO): SBD MOMSN=8329535
2018-06-13T16:25:15.900Z,1528907115.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:15.918Z,1528907115.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:17.790Z,1528907117.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:17.808Z,1528907117.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:17.933Z,1528907117.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:17.987Z,1528907117.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:21.075Z,1528907121.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:21.093Z,1528907121.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:21.207Z,1528907121.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:21.248Z,1528907121.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:21.626Z,1528907121.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:21.651Z,1528907121.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:22.036Z,1528907122.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:22.060Z,1528907122.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:22.428Z,1528907122.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:22.452Z,1528907122.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:22.815Z,1528907122.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:22.844Z,1528907122.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:23.215Z,1528907123.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:23.245Z,1528907123.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:23.612Z,1528907123.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:23.652Z,1528907123.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:24.015Z,1528907124.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:24.042Z,1528907124.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:28.193Z,1528907128.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:28.295Z,1528907128.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:28.295Z,1528907128.295 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 259
2018-06-13T16:25:28.295Z,1528907128.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:25:28.309Z,1528907128.309 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:28.309Z,1528907128.309 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 259
2018-06-13T16:25:28.309Z,1528907128.309 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:25:28.311Z,1528907128.311 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:28.311Z,1528907128.311 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 259
2018-06-13T16:25:28.311Z,1528907128.311 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:25:28.453Z,1528907128.453 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:25:28.453Z,1528907128.453 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:25:28.453Z,1528907128.453 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:25:28.515Z,1528907128.515 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180613T032335/Express0301.lzma
2018-06-13T16:25:28.590Z,1528907128.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:28.793Z,1528907128.793 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:25:28.793Z,1528907128.793 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 259
2018-06-13T16:25:28.794Z,1528907128.794 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:25:28.794Z,1528907128.794 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 259
2018-06-13T16:25:28.794Z,1528907128.794 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:25:28.794Z,1528907128.794 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 259
2018-06-13T16:25:28.895Z,1528907128.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:28.969Z,1528907128.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:25:28.969Z,1528907128.969 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:25:28.970Z,1528907128.970 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:25:28.970Z,1528907128.970 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:25:28.971Z,1528907128.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:25:28.971Z,1528907128.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:25:28.971Z,1528907128.971 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:25:28.972Z,1528907128.972 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:25:28.972Z,1528907128.972 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:25:29.262Z,1528907129.262 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0301.lzma.bak
2018-06-13T16:25:29.262Z,1528907129.262 [DataOverHttps](INFO): SBD MOMSN=8329537
2018-06-13T16:25:29.288Z,1528907129.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:29.336Z,1528907129.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T16:25:29.340Z,1528907129.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:31.200Z,1528907131.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:31.230Z,1528907131.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T16:25:31.231Z,1528907131.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:31.234Z,1528907131.234 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T16:25:31.234Z,1528907131.234 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T16:25:31.234Z,1528907131.234 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T16:25:31.366Z,1528907131.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:31.383Z,1528907131.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2018-06-13T16:25:31.384Z,1528907131.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:31.774Z,1528907131.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:31.791Z,1528907131.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2018-06-13T16:25:31.792Z,1528907131.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:32.166Z,1528907132.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:32.189Z,1528907132.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2018-06-13T16:25:32.190Z,1528907132.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:32.547Z,1528907132.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:32.576Z,1528907132.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-06-13T16:25:32.581Z,1528907132.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:35.685Z,1528907135.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:35.702Z,1528907135.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T16:25:35.703Z,1528907135.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:35.836Z,1528907135.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:35.875Z,1528907135.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:25:35.876Z,1528907135.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:36.241Z,1528907136.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:36.259Z,1528907136.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:25:36.260Z,1528907136.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:36.653Z,1528907136.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:36.686Z,1528907136.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:25:36.687Z,1528907136.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:37.042Z,1528907137.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:37.060Z,1528907137.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:25:37.061Z,1528907137.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:37.438Z,1528907137.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:37.455Z,1528907137.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:25:37.456Z,1528907137.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:37.839Z,1528907137.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:37.857Z,1528907137.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:25:37.858Z,1528907137.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:38.230Z,1528907138.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:38.260Z,1528907138.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:25:38.261Z,1528907138.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:38.638Z,1528907138.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:38.655Z,1528907138.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:25:38.656Z,1528907138.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:39.037Z,1528907139.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:39.055Z,1528907139.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:25:39.056Z,1528907139.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:39.439Z,1528907139.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:39.456Z,1528907139.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:25:39.457Z,1528907139.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:39.846Z,1528907139.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:39.864Z,1528907139.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:25:39.881Z,1528907139.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:40.245Z,1528907140.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:40.263Z,1528907140.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:25:40.264Z,1528907140.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:40.631Z,1528907140.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:40.663Z,1528907140.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:25:40.664Z,1528907140.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:41.036Z,1528907141.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:41.061Z,1528907141.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:25:41.062Z,1528907141.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:41.440Z,1528907141.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:41.458Z,1528907141.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:25:41.459Z,1528907141.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:41.827Z,1528907141.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:41.865Z,1528907141.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:25:41.866Z,1528907141.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:42.246Z,1528907142.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:42.276Z,1528907142.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:25:42.281Z,1528907142.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:42.648Z,1528907142.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:42.678Z,1528907142.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:25:42.679Z,1528907142.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:43.042Z,1528907143.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:43.066Z,1528907143.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:25:43.067Z,1528907143.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:43.431Z,1528907143.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:43.460Z,1528907143.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:25:43.465Z,1528907143.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:43.831Z,1528907143.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:43.868Z,1528907143.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:25:43.873Z,1528907143.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:44.227Z,1528907144.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:44.245Z,1528907144.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T16:25:44.246Z,1528907144.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:44.631Z,1528907144.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:44.649Z,1528907144.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:25:44.650Z,1528907144.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:45.031Z,1528907145.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:45.048Z,1528907145.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:25:45.049Z,1528907145.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:45.442Z,1528907145.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:45.459Z,1528907145.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:25:45.460Z,1528907145.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:45.844Z,1528907145.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:45.861Z,1528907145.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:25:45.862Z,1528907145.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:46.245Z,1528907146.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:46.262Z,1528907146.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:25:46.263Z,1528907146.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:46.631Z,1528907146.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:46.662Z,1528907146.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:25:46.662Z,1528907146.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:47.035Z,1528907147.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:47.060Z,1528907147.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:25:47.066Z,1528907147.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:47.435Z,1528907147.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:47.452Z,1528907147.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:25:47.453Z,1528907147.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:47.830Z,1528907147.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:47.862Z,1528907147.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T16:25:47.863Z,1528907147.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:48.247Z,1528907148.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:48.264Z,1528907148.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T16:25:48.265Z,1528907148.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:48.647Z,1528907148.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:48.665Z,1528907148.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:49.047Z,1528907149.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:49.064Z,1528907149.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:49.435Z,1528907149.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:49.459Z,1528907149.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:49.834Z,1528907149.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:49.851Z,1528907149.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:50.231Z,1528907150.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:50.254Z,1528907150.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:50.635Z,1528907150.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:50.659Z,1528907150.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:51.038Z,1528907151.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:51.055Z,1528907151.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:51.445Z,1528907151.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:51.463Z,1528907151.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:51.846Z,1528907151.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:51.868Z,1528907151.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:52.248Z,1528907152.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:52.265Z,1528907152.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:52.637Z,1528907152.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:52.660Z,1528907152.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:53.035Z,1528907153.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:53.058Z,1528907153.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:53.438Z,1528907153.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:53.457Z,1528907153.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:53.831Z,1528907153.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:53.865Z,1528907153.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:54.250Z,1528907154.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:54.268Z,1528907154.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:54.648Z,1528907154.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:54.665Z,1528907154.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:55.044Z,1528907155.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:55.062Z,1528907155.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:55.435Z,1528907155.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:55.458Z,1528907155.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:55.838Z,1528907155.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:55.855Z,1528907155.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:56.238Z,1528907156.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:56.260Z,1528907156.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:56.635Z,1528907156.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:56.665Z,1528907156.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:57.027Z,1528907157.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:57.064Z,1528907157.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:57.448Z,1528907157.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:57.466Z,1528907157.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:57.851Z,1528907157.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:57.869Z,1528907157.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:58.248Z,1528907158.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:58.266Z,1528907158.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:58.631Z,1528907158.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:58.658Z,1528907158.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:59.042Z,1528907159.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:59.064Z,1528907159.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:59.427Z,1528907159.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:59.464Z,1528907159.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:25:59.831Z,1528907159.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:25:59.868Z,1528907159.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:00.248Z,1528907160.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:00.266Z,1528907160.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:00.652Z,1528907160.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:00.669Z,1528907160.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:01.049Z,1528907161.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:01.067Z,1528907161.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:01.431Z,1528907161.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:01.458Z,1528907161.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:01.831Z,1528907161.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:01.872Z,1528907161.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:02.231Z,1528907162.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:02.248Z,1528907162.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:02.632Z,1528907162.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:02.649Z,1528907162.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:03.031Z,1528907163.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:03.049Z,1528907163.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:03.441Z,1528907163.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:03.474Z,1528907163.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:03.845Z,1528907163.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:03.868Z,1528907163.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:04.245Z,1528907164.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:04.272Z,1528907164.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:04.634Z,1528907164.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:04.652Z,1528907164.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:05.035Z,1528907165.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:05.052Z,1528907165.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:05.435Z,1528907165.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:05.453Z,1528907165.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:05.835Z,1528907165.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:05.853Z,1528907165.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:06.245Z,1528907166.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:06.285Z,1528907166.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:06.645Z,1528907166.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:06.702Z,1528907166.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:07.046Z,1528907167.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:07.063Z,1528907167.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:07.431Z,1528907167.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:07.487Z,1528907167.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:07.827Z,1528907167.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:07.901Z,1528907167.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:08.231Z,1528907168.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:08.382Z,1528907168.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:08.632Z,1528907168.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:08.658Z,1528907168.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:09.034Z,1528907169.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:09.075Z,1528907169.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:09.442Z,1528907169.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:09.464Z,1528907169.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:09.846Z,1528907169.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:09.884Z,1528907169.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:10.286Z,1528907170.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:10.381Z,1528907170.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:10.638Z,1528907170.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:10.660Z,1528907170.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:11.036Z,1528907171.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:11.055Z,1528907171.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:11.431Z,1528907171.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:11.465Z,1528907171.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:11.836Z,1528907171.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:11.855Z,1528907171.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:12.241Z,1528907172.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:12.260Z,1528907172.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:12.645Z,1528907172.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:12.663Z,1528907172.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:13.042Z,1528907173.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:13.059Z,1528907173.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:13.437Z,1528907173.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:13.454Z,1528907173.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:13.838Z,1528907173.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:13.856Z,1528907173.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:14.237Z,1528907174.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:14.255Z,1528907174.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:14.636Z,1528907174.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:14.668Z,1528907174.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:15.039Z,1528907175.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:15.056Z,1528907175.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:15.445Z,1528907175.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:15.463Z,1528907175.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:15.845Z,1528907175.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:15.863Z,1528907175.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:16.248Z,1528907176.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:16.272Z,1528907176.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:16.638Z,1528907176.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:16.655Z,1528907176.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:17.035Z,1528907177.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:17.058Z,1528907177.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:17.444Z,1528907177.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:17.468Z,1528907177.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:17.827Z,1528907177.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:17.866Z,1528907177.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:18.248Z,1528907178.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:18.266Z,1528907178.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:18.655Z,1528907178.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:18.676Z,1528907178.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:19.042Z,1528907179.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:19.074Z,1528907179.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:19.431Z,1528907179.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:19.461Z,1528907179.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:19.831Z,1528907179.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:19.869Z,1528907179.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:20.235Z,1528907180.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:20.264Z,1528907180.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:20.632Z,1528907180.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:20.666Z,1528907180.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:21.031Z,1528907181.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:21.069Z,1528907181.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:21.437Z,1528907181.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:21.467Z,1528907181.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:21.856Z,1528907181.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:21.874Z,1528907181.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:22.253Z,1528907182.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:22.272Z,1528907182.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:22.627Z,1528907182.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:22.656Z,1528907182.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:23.031Z,1528907183.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:23.064Z,1528907183.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:23.435Z,1528907183.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:23.483Z,1528907183.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:23.827Z,1528907183.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:23.845Z,1528907183.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:24.242Z,1528907184.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:24.283Z,1528907184.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:24.649Z,1528907184.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:24.678Z,1528907184.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:25.046Z,1528907185.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:25.080Z,1528907185.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:25.435Z,1528907185.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:25.452Z,1528907185.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:25.834Z,1528907185.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:25.852Z,1528907185.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:26.234Z,1528907186.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:26.253Z,1528907186.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:26.637Z,1528907186.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:26.660Z,1528907186.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:27.038Z,1528907187.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:27.068Z,1528907187.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:27.445Z,1528907187.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:27.463Z,1528907187.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:27.845Z,1528907187.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:27.863Z,1528907187.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:28.245Z,1528907188.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:28.263Z,1528907188.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:28.638Z,1528907188.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:28.656Z,1528907188.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:29.034Z,1528907189.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:29.056Z,1528907189.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:29.439Z,1528907189.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:29.457Z,1528907189.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:29.841Z,1528907189.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:29.859Z,1528907189.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:30.246Z,1528907190.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:30.268Z,1528907190.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:30.647Z,1528907190.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:30.665Z,1528907190.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:31.047Z,1528907191.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:31.072Z,1528907191.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:31.444Z,1528907191.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:31.468Z,1528907191.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:31.842Z,1528907191.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:31.860Z,1528907191.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:32.240Z,1528907192.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:32.258Z,1528907192.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:32.642Z,1528907192.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:32.660Z,1528907192.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:33.046Z,1528907193.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:33.064Z,1528907193.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:33.416Z,1528907193.416 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T16:26:33.416Z,1528907193.416 [NAL9602] Data Fault, FailCount= 1
2018-06-13T16:26:33.416Z,1528907193.416 [NAL9602](ERROR): Data Fault
2018-06-13T16:26:33.443Z,1528907193.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:33.476Z,1528907193.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:33.565Z,1528907193.565 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T16:26:33.814Z,1528907193.814 [NAL9602](INFO): Powering down
2018-06-13T16:26:33.839Z,1528907193.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:33.873Z,1528907193.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:34.240Z,1528907194.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:34.258Z,1528907194.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:34.640Z,1528907194.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:34.658Z,1528907194.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:34.741Z,1528907194.741 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T16:26:34.741Z,1528907194.741 [NAL9602] No Fault, FailCount= 1
2018-06-13T16:26:35.040Z,1528907195.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:35.057Z,1528907195.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:35.430Z,1528907195.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:35.471Z,1528907195.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:38.547Z,1528907198.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:38.565Z,1528907198.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:38.664Z,1528907198.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:38.682Z,1528907198.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:39.070Z,1528907199.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:39.111Z,1528907199.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:39.467Z,1528907199.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:39.485Z,1528907199.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:39.867Z,1528907199.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:39.902Z,1528907199.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:40.269Z,1528907200.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:40.292Z,1528907200.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:40.665Z,1528907200.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:40.683Z,1528907200.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:41.070Z,1528907201.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:41.087Z,1528907201.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:41.469Z,1528907201.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:41.495Z,1528907201.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:41.867Z,1528907201.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:41.885Z,1528907201.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:42.270Z,1528907202.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:42.287Z,1528907202.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:42.670Z,1528907202.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:42.688Z,1528907202.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:43.067Z,1528907203.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:43.085Z,1528907203.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:43.470Z,1528907203.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:43.488Z,1528907203.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:43.869Z,1528907203.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:43.887Z,1528907203.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:44.269Z,1528907204.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:44.287Z,1528907204.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:44.669Z,1528907204.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:44.687Z,1528907204.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:45.067Z,1528907205.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:45.085Z,1528907205.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:45.469Z,1528907205.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:45.487Z,1528907205.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:45.874Z,1528907205.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:45.892Z,1528907205.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:46.269Z,1528907206.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:46.287Z,1528907206.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:46.667Z,1528907206.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:46.686Z,1528907206.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:47.070Z,1528907207.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:47.087Z,1528907207.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:47.470Z,1528907207.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:47.492Z,1528907207.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:47.868Z,1528907207.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:47.886Z,1528907207.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:48.270Z,1528907208.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:48.288Z,1528907208.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:48.669Z,1528907208.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:48.687Z,1528907208.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:49.072Z,1528907209.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:49.090Z,1528907209.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:49.471Z,1528907209.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:49.489Z,1528907209.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:49.869Z,1528907209.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:49.887Z,1528907209.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:50.268Z,1528907210.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:50.286Z,1528907210.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:50.673Z,1528907210.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:50.691Z,1528907210.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:51.073Z,1528907211.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:51.091Z,1528907211.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:51.468Z,1528907211.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:51.487Z,1528907211.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:51.870Z,1528907211.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:51.888Z,1528907211.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:52.273Z,1528907212.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:52.291Z,1528907212.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:52.669Z,1528907212.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:52.687Z,1528907212.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:53.070Z,1528907213.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:53.088Z,1528907213.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:53.466Z,1528907213.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:53.496Z,1528907213.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:53.872Z,1528907213.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:53.890Z,1528907213.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:54.279Z,1528907214.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:54.296Z,1528907214.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:54.669Z,1528907214.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:54.687Z,1528907214.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:55.067Z,1528907215.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:55.085Z,1528907215.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:55.473Z,1528907215.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:55.491Z,1528907215.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:55.874Z,1528907215.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:55.892Z,1528907215.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:56.271Z,1528907216.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:56.289Z,1528907216.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:56.670Z,1528907216.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:56.688Z,1528907216.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:57.071Z,1528907217.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:57.089Z,1528907217.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:57.473Z,1528907217.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:57.491Z,1528907217.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:57.874Z,1528907217.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:57.892Z,1528907217.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:58.270Z,1528907218.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:58.288Z,1528907218.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:58.673Z,1528907218.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:58.691Z,1528907218.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:59.073Z,1528907219.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:59.096Z,1528907219.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:59.470Z,1528907219.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:59.488Z,1528907219.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:26:59.870Z,1528907219.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:26:59.888Z,1528907219.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:00.273Z,1528907220.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:00.291Z,1528907220.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:00.674Z,1528907220.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:00.691Z,1528907220.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:01.072Z,1528907221.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:01.090Z,1528907221.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:01.474Z,1528907221.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:01.494Z,1528907221.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:01.868Z,1528907221.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:01.889Z,1528907221.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:02.273Z,1528907222.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:02.292Z,1528907222.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:02.674Z,1528907222.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:02.693Z,1528907222.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:03.073Z,1528907223.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:03.092Z,1528907223.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:03.470Z,1528907223.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:03.491Z,1528907223.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:03.854Z,1528907223.854 [NAL9602](INFO): Powering up NAL9602
2018-06-13T16:27:03.874Z,1528907223.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:03.892Z,1528907223.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:04.273Z,1528907224.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:04.291Z,1528907224.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:04.673Z,1528907224.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:04.691Z,1528907224.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:05.071Z,1528907225.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:05.092Z,1528907225.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:05.472Z,1528907225.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:05.496Z,1528907225.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:05.873Z,1528907225.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:05.891Z,1528907225.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:06.273Z,1528907226.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:06.291Z,1528907226.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:06.668Z,1528907226.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:06.691Z,1528907226.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:07.075Z,1528907227.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:07.093Z,1528907227.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:07.474Z,1528907227.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:07.500Z,1528907227.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:07.877Z,1528907227.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:07.894Z,1528907227.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:08.272Z,1528907228.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:08.295Z,1528907228.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:08.674Z,1528907228.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:08.707Z,1528907228.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:09.072Z,1528907229.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:09.090Z,1528907229.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:09.473Z,1528907229.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:09.491Z,1528907229.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:09.871Z,1528907229.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:09.898Z,1528907229.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:10.272Z,1528907230.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:10.302Z,1528907230.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:10.678Z,1528907230.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:10.696Z,1528907230.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:11.075Z,1528907231.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:11.100Z,1528907231.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:11.468Z,1528907231.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:11.504Z,1528907231.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:11.868Z,1528907231.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:11.891Z,1528907231.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:12.272Z,1528907232.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:12.296Z,1528907232.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:12.676Z,1528907232.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:12.700Z,1528907232.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:13.069Z,1528907233.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:13.104Z,1528907233.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:13.470Z,1528907233.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:13.498Z,1528907233.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:13.873Z,1528907233.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:13.891Z,1528907233.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:14.275Z,1528907234.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:14.293Z,1528907234.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:14.683Z,1528907234.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:14.706Z,1528907234.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:15.047Z,1528907235.047 [NAL9602](INFO): NAL9602 initialized
2018-06-13T16:27:15.066Z,1528907235.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:15.104Z,1528907235.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:15.474Z,1528907235.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:15.508Z,1528907235.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:15.884Z,1528907235.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:15.908Z,1528907235.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:16.282Z,1528907236.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:16.328Z,1528907236.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:16.685Z,1528907236.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:16.727Z,1528907236.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:17.074Z,1528907237.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:17.110Z,1528907237.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:17.477Z,1528907237.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:17.495Z,1528907237.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:17.864Z,1528907237.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:17.908Z,1528907237.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:18.271Z,1528907238.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:18.302Z,1528907238.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:18.688Z,1528907238.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:18.706Z,1528907238.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:19.086Z,1528907239.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:19.103Z,1528907239.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:19.487Z,1528907239.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:19.535Z,1528907239.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:19.867Z,1528907239.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:19.912Z,1528907239.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:20.267Z,1528907240.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:20.312Z,1528907240.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:20.677Z,1528907240.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:20.698Z,1528907240.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:21.067Z,1528907241.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:21.109Z,1528907241.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:21.463Z,1528907241.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:21.510Z,1528907241.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:21.891Z,1528907241.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:21.909Z,1528907241.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:22.288Z,1528907242.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:22.313Z,1528907242.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:22.676Z,1528907242.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:22.712Z,1528907242.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:23.067Z,1528907243.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:23.103Z,1528907243.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:23.463Z,1528907243.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:23.508Z,1528907243.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:23.863Z,1528907243.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:23.903Z,1528907243.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:24.267Z,1528907244.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:24.310Z,1528907244.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:24.688Z,1528907244.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:24.710Z,1528907244.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:25.086Z,1528907245.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:25.122Z,1528907245.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:25.490Z,1528907245.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:25.508Z,1528907245.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:25.867Z,1528907245.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:25.909Z,1528907245.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:26.263Z,1528907246.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:26.280Z,1528907246.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:26.667Z,1528907246.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:26.703Z,1528907246.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:27.068Z,1528907247.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:27.107Z,1528907247.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:27.467Z,1528907247.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:27.484Z,1528907247.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:27.885Z,1528907247.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:27.916Z,1528907247.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:28.286Z,1528907248.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:28.317Z,1528907248.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:28.679Z,1528907248.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:28.715Z,1528907248.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:29.072Z,1528907249.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:29.123Z,1528907249.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:29.470Z,1528907249.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:29.517Z,1528907249.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:29.871Z,1528907249.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:29.892Z,1528907249.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:30.270Z,1528907250.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:30.293Z,1528907250.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:30.681Z,1528907250.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:30.699Z,1528907250.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:31.082Z,1528907251.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:31.103Z,1528907251.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:31.486Z,1528907251.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:31.526Z,1528907251.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:31.878Z,1528907251.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:31.900Z,1528907251.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:34.984Z,1528907254.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:35.003Z,1528907255.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:35.139Z,1528907255.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:35.157Z,1528907255.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:35.542Z,1528907255.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:35.559Z,1528907255.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:35.949Z,1528907255.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:35.979Z,1528907255.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:36.345Z,1528907256.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:36.363Z,1528907256.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:36.735Z,1528907256.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:36.753Z,1528907256.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:37.138Z,1528907257.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:37.156Z,1528907257.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:37.549Z,1528907257.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:37.583Z,1528907257.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:37.950Z,1528907257.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:37.988Z,1528907257.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:38.343Z,1528907258.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:38.361Z,1528907258.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:38.735Z,1528907258.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:38.768Z,1528907258.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:39.134Z,1528907259.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:39.167Z,1528907259.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:39.543Z,1528907259.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:39.561Z,1528907259.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:39.945Z,1528907259.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:39.963Z,1528907259.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:40.346Z,1528907260.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:40.365Z,1528907260.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:40.738Z,1528907260.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:40.756Z,1528907260.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:41.139Z,1528907261.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:41.156Z,1528907261.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:41.547Z,1528907261.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:41.572Z,1528907261.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:41.948Z,1528907261.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:41.966Z,1528907261.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:42.342Z,1528907262.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:42.376Z,1528907262.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:42.732Z,1528907262.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:42.759Z,1528907262.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:43.127Z,1528907263.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:43.164Z,1528907263.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:43.554Z,1528907263.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:43.572Z,1528907263.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:43.946Z,1528907263.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:43.980Z,1528907263.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:44.344Z,1528907264.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:44.362Z,1528907264.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:44.741Z,1528907264.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:44.759Z,1528907264.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:45.123Z,1528907265.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:45.168Z,1528907265.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:45.548Z,1528907265.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:45.566Z,1528907265.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:45.949Z,1528907265.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:45.967Z,1528907265.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:46.352Z,1528907266.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:46.370Z,1528907266.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:46.723Z,1528907266.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:46.763Z,1528907266.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:47.131Z,1528907267.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:47.163Z,1528907267.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:47.529Z,1528907267.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:47.558Z,1528907267.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:47.948Z,1528907267.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:47.972Z,1528907267.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:48.354Z,1528907268.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:48.385Z,1528907268.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:48.740Z,1528907268.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:48.770Z,1528907268.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:49.125Z,1528907269.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:49.151Z,1528907269.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:49.531Z,1528907269.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:49.561Z,1528907269.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:49.923Z,1528907269.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:49.976Z,1528907269.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:50.323Z,1528907270.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:50.346Z,1528907270.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:50.745Z,1528907270.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:50.772Z,1528907270.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:51.145Z,1528907271.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:51.172Z,1528907271.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:51.549Z,1528907271.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:51.578Z,1528907271.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:51.932Z,1528907271.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:51.969Z,1528907271.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:52.333Z,1528907272.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:52.350Z,1528907272.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:52.728Z,1528907272.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:52.746Z,1528907272.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:53.130Z,1528907273.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:53.173Z,1528907273.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:53.530Z,1528907273.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:53.553Z,1528907273.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:53.940Z,1528907273.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:53.970Z,1528907273.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:54.345Z,1528907274.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:54.378Z,1528907274.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:54.733Z,1528907274.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:54.772Z,1528907274.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:55.130Z,1528907275.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:55.153Z,1528907275.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:55.532Z,1528907275.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:55.552Z,1528907275.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:55.933Z,1528907275.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:55.950Z,1528907275.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:56.329Z,1528907276.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:56.371Z,1528907276.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:56.743Z,1528907276.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:56.782Z,1528907276.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:57.139Z,1528907277.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:57.156Z,1528907277.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:57.539Z,1528907277.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:57.565Z,1528907277.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:57.930Z,1528907277.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:57.978Z,1528907277.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:58.330Z,1528907278.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:58.354Z,1528907278.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:58.729Z,1528907278.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:58.751Z,1528907278.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:59.133Z,1528907279.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:59.151Z,1528907279.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:59.529Z,1528907279.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:59.582Z,1528907279.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:27:59.937Z,1528907279.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:27:59.960Z,1528907279.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:00.344Z,1528907280.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:00.378Z,1528907280.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:00.740Z,1528907280.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:00.830Z,1528907280.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:01.133Z,1528907281.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:01.180Z,1528907281.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:01.532Z,1528907281.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:01.555Z,1528907281.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:01.933Z,1528907281.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:01.955Z,1528907281.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:02.335Z,1528907282.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:02.354Z,1528907282.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:02.737Z,1528907282.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:02.780Z,1528907282.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:03.142Z,1528907283.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:03.187Z,1528907283.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:03.543Z,1528907283.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:03.563Z,1528907283.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:03.934Z,1528907283.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:03.954Z,1528907283.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:04.328Z,1528907284.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:04.357Z,1528907284.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:04.732Z,1528907284.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:04.751Z,1528907284.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:05.132Z,1528907285.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:05.155Z,1528907285.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:05.533Z,1528907285.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:05.554Z,1528907285.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:05.941Z,1528907285.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:05.987Z,1528907285.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:06.341Z,1528907286.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:06.364Z,1528907286.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:06.738Z,1528907286.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:06.761Z,1528907286.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:07.136Z,1528907287.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:07.157Z,1528907287.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:07.533Z,1528907287.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:07.585Z,1528907287.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:07.933Z,1528907287.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:07.952Z,1528907287.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:08.337Z,1528907288.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:08.360Z,1528907288.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:08.744Z,1528907288.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:08.763Z,1528907288.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:09.141Z,1528907289.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:09.186Z,1528907289.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:09.542Z,1528907289.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:09.562Z,1528907289.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:09.931Z,1528907289.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:09.959Z,1528907289.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:10.331Z,1528907290.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:10.364Z,1528907290.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:10.734Z,1528907290.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:10.752Z,1528907290.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:11.134Z,1528907291.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:11.152Z,1528907291.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:11.533Z,1528907291.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:11.551Z,1528907291.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:11.943Z,1528907291.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:11.964Z,1528907291.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:12.341Z,1528907292.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:12.397Z,1528907292.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:12.739Z,1528907292.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:12.757Z,1528907292.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:13.135Z,1528907293.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:13.153Z,1528907293.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:13.531Z,1528907293.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:13.570Z,1528907293.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:13.938Z,1528907293.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:13.955Z,1528907293.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:14.334Z,1528907294.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:14.356Z,1528907294.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:14.742Z,1528907294.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:14.766Z,1528907294.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:15.142Z,1528907295.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:15.165Z,1528907295.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:15.545Z,1528907295.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:15.563Z,1528907295.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:15.931Z,1528907295.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:15.962Z,1528907295.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:16.331Z,1528907296.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:16.362Z,1528907296.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:16.727Z,1528907296.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:16.761Z,1528907296.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:17.128Z,1528907297.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:17.160Z,1528907297.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:17.528Z,1528907297.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:17.561Z,1528907297.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:17.948Z,1528907297.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:17.971Z,1528907297.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:18.347Z,1528907298.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:18.370Z,1528907298.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:18.743Z,1528907298.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:18.762Z,1528907298.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:19.123Z,1528907299.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:19.152Z,1528907299.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:19.527Z,1528907299.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:19.565Z,1528907299.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:19.928Z,1528907299.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:19.963Z,1528907299.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:20.331Z,1528907300.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:20.365Z,1528907300.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:20.745Z,1528907300.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:20.772Z,1528907300.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:21.145Z,1528907301.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:21.178Z,1528907301.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:21.545Z,1528907301.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:21.579Z,1528907301.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:21.931Z,1528907301.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:21.979Z,1528907301.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:22.331Z,1528907302.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:22.349Z,1528907302.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:22.731Z,1528907302.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:22.749Z,1528907302.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:23.132Z,1528907303.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:23.150Z,1528907303.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:23.531Z,1528907303.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:23.580Z,1528907303.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:23.941Z,1528907303.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:23.959Z,1528907303.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:24.342Z,1528907304.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:24.360Z,1528907304.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:24.739Z,1528907304.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:24.768Z,1528907304.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:25.131Z,1528907305.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:25.149Z,1528907305.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:25.526Z,1528907305.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:25.559Z,1528907305.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:25.931Z,1528907305.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:25.960Z,1528907305.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:26.334Z,1528907306.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:26.352Z,1528907306.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:26.742Z,1528907306.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:26.760Z,1528907306.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:27.147Z,1528907307.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:27.166Z,1528907307.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:27.543Z,1528907307.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:27.562Z,1528907307.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:27.931Z,1528907307.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:27.961Z,1528907307.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:28.337Z,1528907308.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:28.355Z,1528907308.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:28.727Z,1528907308.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:28.755Z,1528907308.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:29.128Z,1528907309.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:29.158Z,1528907309.158 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:29.158Z,1528907309.158 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 260
2018-06-13T16:28:29.158Z,1528907309.158 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:28:29.159Z,1528907309.159 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:29.160Z,1528907309.160 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 260
2018-06-13T16:28:29.160Z,1528907309.160 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:28:29.162Z,1528907309.162 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:29.162Z,1528907309.162 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 260
2018-06-13T16:28:29.162Z,1528907309.162 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:28:29.241Z,1528907309.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:28:29.241Z,1528907309.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:28:29.242Z,1528907309.242 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:28:29.527Z,1528907309.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:29.642Z,1528907309.642 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:28:29.642Z,1528907309.642 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 260
2018-06-13T16:28:29.642Z,1528907309.642 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:28:29.642Z,1528907309.642 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 260
2018-06-13T16:28:29.643Z,1528907309.643 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:28:29.643Z,1528907309.643 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 260
2018-06-13T16:28:29.944Z,1528907309.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:29.961Z,1528907309.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:28:29.962Z,1528907309.962 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:28:29.962Z,1528907309.962 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:28:29.962Z,1528907309.962 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:28:29.963Z,1528907309.963 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:28:29.963Z,1528907309.963 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:28:29.963Z,1528907309.963 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:28:29.964Z,1528907309.964 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:28:29.964Z,1528907309.964 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:28:30.347Z,1528907310.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:30.364Z,1528907310.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:28:30.365Z,1528907310.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:30.733Z,1528907310.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:30.769Z,1528907310.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:28:30.770Z,1528907310.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:31.123Z,1528907311.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:31.140Z,1528907311.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:28:31.150Z,1528907311.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:31.531Z,1528907311.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:31.564Z,1528907311.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:28:31.570Z,1528907311.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:31.931Z,1528907311.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:31.971Z,1528907311.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:28:31.972Z,1528907311.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:32.331Z,1528907312.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:32.348Z,1528907312.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:28:32.366Z,1528907312.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:32.745Z,1528907312.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:32.772Z,1528907312.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:28:32.773Z,1528907312.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:33.145Z,1528907313.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:33.173Z,1528907313.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:28:33.174Z,1528907313.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:33.545Z,1528907313.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:33.573Z,1528907313.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:28:33.574Z,1528907313.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:33.932Z,1528907313.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:33.950Z,1528907313.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:28:33.950Z,1528907313.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:34.331Z,1528907314.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:34.349Z,1528907314.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:28:34.350Z,1528907314.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:34.729Z,1528907314.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:34.746Z,1528907314.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:28:34.747Z,1528907314.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:35.134Z,1528907315.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:35.156Z,1528907315.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:28:35.173Z,1528907315.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:35.534Z,1528907315.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:35.552Z,1528907315.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:28:35.553Z,1528907315.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:38.681Z,1528907318.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:38.699Z,1528907318.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T16:28:38.700Z,1528907318.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:38.838Z,1528907318.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:38.860Z,1528907318.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T16:28:38.877Z,1528907318.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:39.236Z,1528907319.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:39.260Z,1528907319.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T16:28:39.261Z,1528907319.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:39.627Z,1528907319.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:39.645Z,1528907319.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T16:28:39.646Z,1528907319.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:40.018Z,1528907320.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:40.042Z,1528907320.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T16:28:40.043Z,1528907320.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:40.418Z,1528907320.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:40.447Z,1528907320.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T16:28:40.448Z,1528907320.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:40.832Z,1528907320.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:40.850Z,1528907320.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T16:28:40.851Z,1528907320.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:41.236Z,1528907321.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:41.254Z,1528907321.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T16:28:41.255Z,1528907321.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:41.630Z,1528907321.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:41.647Z,1528907321.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T16:28:41.648Z,1528907321.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:42.010Z,1528907322.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:42.048Z,1528907322.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T16:28:42.053Z,1528907322.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:42.414Z,1528907322.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:42.451Z,1528907322.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T16:28:42.452Z,1528907322.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:42.811Z,1528907322.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:42.854Z,1528907322.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T16:28:42.854Z,1528907322.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:43.213Z,1528907323.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:43.245Z,1528907323.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T16:28:43.246Z,1528907323.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:43.612Z,1528907323.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:43.646Z,1528907323.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T16:28:43.647Z,1528907323.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:44.026Z,1528907324.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:44.060Z,1528907324.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T16:28:44.061Z,1528907324.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:44.422Z,1528907324.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:44.458Z,1528907324.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T16:28:44.459Z,1528907324.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:44.828Z,1528907324.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:44.856Z,1528907324.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T16:28:44.857Z,1528907324.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:45.214Z,1528907325.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:45.252Z,1528907325.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T16:28:45.257Z,1528907325.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:45.618Z,1528907325.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:45.635Z,1528907325.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T16:28:45.636Z,1528907325.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:46.014Z,1528907326.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:46.057Z,1528907326.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T16:28:46.058Z,1528907326.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:46.414Z,1528907326.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:46.436Z,1528907326.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T16:28:46.437Z,1528907326.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:46.824Z,1528907326.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:46.842Z,1528907326.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T16:28:46.843Z,1528907326.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:47.226Z,1528907327.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:47.243Z,1528907327.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T16:28:47.244Z,1528907327.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:47.622Z,1528907327.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:47.671Z,1528907327.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T16:28:47.672Z,1528907327.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:48.014Z,1528907328.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:48.065Z,1528907328.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T16:28:48.066Z,1528907328.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:48.419Z,1528907328.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:48.462Z,1528907328.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T16:28:48.463Z,1528907328.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:48.821Z,1528907328.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:48.839Z,1528907328.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T16:28:48.840Z,1528907328.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:49.214Z,1528907329.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:49.248Z,1528907329.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:49.616Z,1528907329.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:49.639Z,1528907329.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:50.025Z,1528907330.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:50.043Z,1528907330.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:50.426Z,1528907330.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:50.444Z,1528907330.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:50.821Z,1528907330.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:50.864Z,1528907330.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:51.216Z,1528907331.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:51.239Z,1528907331.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:51.615Z,1528907331.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:51.636Z,1528907331.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:52.019Z,1528907332.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:52.041Z,1528907332.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:52.416Z,1528907332.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:52.467Z,1528907332.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:52.827Z,1528907332.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:52.865Z,1528907332.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:53.228Z,1528907333.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:53.246Z,1528907333.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:53.628Z,1528907333.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:53.646Z,1528907333.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:54.014Z,1528907334.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:54.065Z,1528907334.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:54.417Z,1528907334.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:54.440Z,1528907334.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:54.816Z,1528907334.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:54.839Z,1528907334.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:55.218Z,1528907335.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:55.236Z,1528907335.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:55.616Z,1528907335.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:55.660Z,1528907335.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:56.022Z,1528907336.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:56.045Z,1528907336.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:56.425Z,1528907336.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:56.445Z,1528907336.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:56.823Z,1528907336.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:56.848Z,1528907336.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:57.217Z,1528907337.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:57.265Z,1528907337.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:57.618Z,1528907337.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:57.642Z,1528907337.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:58.015Z,1528907338.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:58.043Z,1528907338.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:58.417Z,1528907338.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:58.444Z,1528907338.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:58.824Z,1528907338.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:58.871Z,1528907338.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:59.226Z,1528907339.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:59.268Z,1528907339.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:28:59.622Z,1528907339.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:28:59.646Z,1528907339.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:00.014Z,1528907340.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:00.036Z,1528907340.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:00.419Z,1528907340.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:00.473Z,1528907340.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:00.817Z,1528907340.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:00.835Z,1528907340.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:01.215Z,1528907341.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:01.238Z,1528907341.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:01.623Z,1528907341.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:01.651Z,1528907341.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:02.026Z,1528907342.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:02.074Z,1528907342.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:02.428Z,1528907342.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:02.451Z,1528907342.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:02.827Z,1528907342.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:02.849Z,1528907342.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:03.215Z,1528907343.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:03.252Z,1528907343.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:03.615Z,1528907343.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:03.648Z,1528907343.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:04.016Z,1528907344.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:04.039Z,1528907344.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:04.415Z,1528907344.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:04.452Z,1528907344.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:04.834Z,1528907344.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:04.852Z,1528907344.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:05.232Z,1528907345.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:05.279Z,1528907345.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:05.627Z,1528907345.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:05.648Z,1528907345.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:06.007Z,1528907346.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:06.053Z,1528907346.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:06.415Z,1528907346.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:06.450Z,1528907346.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:06.811Z,1528907346.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:06.848Z,1528907346.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:07.212Z,1528907347.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:07.242Z,1528907347.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:07.611Z,1528907347.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:07.650Z,1528907347.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:08.026Z,1528907348.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:08.063Z,1528907348.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:08.421Z,1528907348.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:08.471Z,1528907348.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:08.822Z,1528907348.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:08.860Z,1528907348.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:09.211Z,1528907349.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:09.256Z,1528907349.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:09.608Z,1528907349.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:09.639Z,1528907349.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:10.012Z,1528907350.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:10.046Z,1528907350.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:10.411Z,1528907350.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:10.429Z,1528907350.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:10.825Z,1528907350.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:10.865Z,1528907350.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:11.226Z,1528907351.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:11.268Z,1528907351.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:11.622Z,1528907351.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:11.640Z,1528907351.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:12.018Z,1528907352.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:12.036Z,1528907352.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:12.416Z,1528907352.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:12.435Z,1528907352.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:12.815Z,1528907352.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:12.859Z,1528907352.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:13.214Z,1528907353.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:13.233Z,1528907353.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:13.615Z,1528907353.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:13.649Z,1528907353.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:14.028Z,1528907354.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:14.047Z,1528907354.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:14.430Z,1528907354.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:14.454Z,1528907354.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:14.827Z,1528907354.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:14.846Z,1528907354.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:15.215Z,1528907355.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:15.244Z,1528907355.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:15.607Z,1528907355.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:15.637Z,1528907355.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:16.011Z,1528907356.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:16.052Z,1528907356.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:16.411Z,1528907356.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:16.444Z,1528907356.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:16.831Z,1528907356.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:16.849Z,1528907356.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:17.230Z,1528907357.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:17.254Z,1528907357.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:17.626Z,1528907357.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:17.655Z,1528907357.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:18.007Z,1528907358.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:18.037Z,1528907358.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:18.411Z,1528907358.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:18.449Z,1528907358.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:18.811Z,1528907358.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:18.844Z,1528907358.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:19.211Z,1528907359.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:19.230Z,1528907359.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:19.615Z,1528907359.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:19.660Z,1528907359.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:20.026Z,1528907360.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:20.055Z,1528907360.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:20.421Z,1528907360.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:20.439Z,1528907360.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:20.822Z,1528907360.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:20.840Z,1528907360.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:21.216Z,1528907361.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:21.234Z,1528907361.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:21.618Z,1528907361.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:21.636Z,1528907361.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:22.018Z,1528907362.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:22.035Z,1528907362.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:22.416Z,1528907362.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:22.434Z,1528907362.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:22.822Z,1528907362.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:22.840Z,1528907362.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:23.228Z,1528907363.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:23.252Z,1528907363.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:23.627Z,1528907363.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:23.645Z,1528907363.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:24.007Z,1528907364.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:24.045Z,1528907364.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:24.411Z,1528907364.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:24.438Z,1528907364.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:24.811Z,1528907364.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:24.839Z,1528907364.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:25.211Z,1528907365.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:25.239Z,1528907365.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:25.607Z,1528907365.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:25.644Z,1528907365.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:26.027Z,1528907366.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:26.045Z,1528907366.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:26.432Z,1528907366.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:26.450Z,1528907366.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:26.827Z,1528907366.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:26.845Z,1528907366.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:27.211Z,1528907367.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:27.248Z,1528907367.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:27.607Z,1528907367.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:27.635Z,1528907367.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:28.011Z,1528907368.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:28.044Z,1528907368.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:28.411Z,1528907368.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:28.444Z,1528907368.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:28.828Z,1528907368.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:28.846Z,1528907368.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:29.232Z,1528907369.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:29.305Z,1528907369.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:29.627Z,1528907369.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:29.645Z,1528907369.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:30.007Z,1528907370.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:30.044Z,1528907370.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:30.411Z,1528907370.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:30.447Z,1528907370.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:30.811Z,1528907370.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:30.848Z,1528907370.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:31.211Z,1528907371.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:31.240Z,1528907371.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:31.621Z,1528907371.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:31.639Z,1528907371.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:32.031Z,1528907372.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:32.049Z,1528907372.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:32.432Z,1528907372.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:32.451Z,1528907372.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:32.831Z,1528907372.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:32.848Z,1528907372.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:33.222Z,1528907373.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:33.244Z,1528907373.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:33.611Z,1528907373.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:33.645Z,1528907373.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:34.014Z,1528907374.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:34.048Z,1528907374.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:34.415Z,1528907374.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:34.460Z,1528907374.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:34.833Z,1528907374.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:34.851Z,1528907374.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:35.236Z,1528907375.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:35.254Z,1528907375.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:35.621Z,1528907375.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:35.656Z,1528907375.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:38.724Z,1528907378.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:38.753Z,1528907378.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:38.867Z,1528907378.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:38.911Z,1528907378.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:39.288Z,1528907379.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:39.311Z,1528907379.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:39.677Z,1528907379.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:39.717Z,1528907379.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:40.074Z,1528907380.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:40.112Z,1528907380.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:40.463Z,1528907380.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:40.504Z,1528907380.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:40.867Z,1528907380.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:40.896Z,1528907380.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:41.268Z,1528907381.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:41.286Z,1528907381.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:41.666Z,1528907381.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:41.688Z,1528907381.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:42.073Z,1528907382.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:42.091Z,1528907382.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:42.477Z,1528907382.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:42.495Z,1528907382.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:42.874Z,1528907382.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:42.892Z,1528907382.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:43.270Z,1528907383.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:43.294Z,1528907383.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:43.667Z,1528907383.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:43.697Z,1528907383.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:44.074Z,1528907384.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:44.092Z,1528907384.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:44.466Z,1528907384.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:44.484Z,1528907384.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:44.879Z,1528907384.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:44.901Z,1528907384.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:45.278Z,1528907385.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:45.300Z,1528907385.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:45.679Z,1528907385.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:45.696Z,1528907385.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:46.069Z,1528907386.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:46.087Z,1528907386.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:46.470Z,1528907386.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:46.490Z,1528907386.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:46.867Z,1528907386.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:46.885Z,1528907386.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:47.268Z,1528907387.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:47.298Z,1528907387.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:47.667Z,1528907387.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:47.692Z,1528907387.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:48.084Z,1528907388.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:48.107Z,1528907388.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:48.482Z,1528907388.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:48.500Z,1528907388.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:48.880Z,1528907388.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:48.898Z,1528907388.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:49.259Z,1528907389.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:49.294Z,1528907389.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:49.663Z,1528907389.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:49.704Z,1528907389.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:50.064Z,1528907390.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:50.098Z,1528907390.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:50.463Z,1528907390.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:50.501Z,1528907390.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:50.873Z,1528907390.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:50.902Z,1528907390.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:51.277Z,1528907391.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:51.318Z,1528907391.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:51.673Z,1528907391.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:51.712Z,1528907391.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:52.063Z,1528907392.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:52.104Z,1528907392.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:52.466Z,1528907392.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:52.484Z,1528907392.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:52.862Z,1528907392.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:52.881Z,1528907392.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:53.272Z,1528907393.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:53.289Z,1528907393.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:53.669Z,1528907393.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:53.687Z,1528907393.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:54.073Z,1528907394.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:54.091Z,1528907394.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:54.477Z,1528907394.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:54.495Z,1528907394.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:54.874Z,1528907394.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:54.893Z,1528907394.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:55.266Z,1528907395.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:55.284Z,1528907395.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:55.674Z,1528907395.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:55.697Z,1528907395.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:56.067Z,1528907396.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:56.102Z,1528907396.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:56.459Z,1528907396.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:56.497Z,1528907396.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:56.884Z,1528907396.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:56.902Z,1528907396.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:57.279Z,1528907397.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:57.298Z,1528907397.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:57.681Z,1528907397.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:57.699Z,1528907397.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:58.059Z,1528907398.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:58.097Z,1528907398.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:58.463Z,1528907398.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:58.506Z,1528907398.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:58.859Z,1528907398.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:58.877Z,1528907398.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:59.263Z,1528907399.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:59.315Z,1528907399.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:29:59.661Z,1528907399.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:29:59.679Z,1528907399.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:00.073Z,1528907400.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:00.091Z,1528907400.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:00.481Z,1528907400.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:00.515Z,1528907400.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:00.873Z,1528907400.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:00.891Z,1528907400.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:01.266Z,1528907401.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:01.283Z,1528907401.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:01.667Z,1528907401.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:01.697Z,1528907401.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:02.059Z,1528907402.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:02.086Z,1528907402.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:02.459Z,1528907402.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:02.490Z,1528907402.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:02.883Z,1528907402.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:02.901Z,1528907402.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:03.283Z,1528907403.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:03.301Z,1528907403.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:03.680Z,1528907403.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:03.704Z,1528907403.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:04.063Z,1528907404.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:04.099Z,1528907404.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:04.458Z,1528907404.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:04.487Z,1528907404.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:04.859Z,1528907404.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:04.895Z,1528907404.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:05.264Z,1528907405.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:05.295Z,1528907405.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:05.663Z,1528907405.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:05.690Z,1528907405.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:06.079Z,1528907406.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:06.097Z,1528907406.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:06.483Z,1528907406.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:06.509Z,1528907406.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:06.872Z,1528907406.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:06.900Z,1528907406.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:07.259Z,1528907407.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:07.294Z,1528907407.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:07.663Z,1528907407.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:07.696Z,1528907407.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:08.063Z,1528907408.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:08.096Z,1528907408.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:08.459Z,1528907408.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:08.496Z,1528907408.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:08.879Z,1528907408.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:08.897Z,1528907408.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:09.279Z,1528907409.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:09.297Z,1528907409.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:09.676Z,1528907409.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:09.702Z,1528907409.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:10.067Z,1528907410.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:10.094Z,1528907410.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:10.463Z,1528907410.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:10.491Z,1528907410.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:10.859Z,1528907410.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:10.896Z,1528907410.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:11.263Z,1528907411.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:11.290Z,1528907411.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:11.658Z,1528907411.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:11.695Z,1528907411.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:12.085Z,1528907412.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:12.103Z,1528907412.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:12.483Z,1528907412.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:12.501Z,1528907412.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:12.869Z,1528907412.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:12.904Z,1528907412.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:13.263Z,1528907413.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:13.297Z,1528907413.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:13.663Z,1528907413.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:13.703Z,1528907413.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:14.063Z,1528907414.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:14.106Z,1528907414.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:14.463Z,1528907414.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:14.497Z,1528907414.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:14.877Z,1528907414.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:14.905Z,1528907414.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:15.277Z,1528907415.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:15.304Z,1528907415.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:15.677Z,1528907415.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:15.705Z,1528907415.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:16.063Z,1528907416.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:16.104Z,1528907416.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:16.466Z,1528907416.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:16.484Z,1528907416.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:16.864Z,1528907416.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:16.882Z,1528907416.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:17.266Z,1528907417.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:17.288Z,1528907417.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:17.666Z,1528907417.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:17.684Z,1528907417.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:18.077Z,1528907418.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:18.111Z,1528907418.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:18.478Z,1528907418.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:18.495Z,1528907418.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:18.873Z,1528907418.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:18.891Z,1528907418.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:19.269Z,1528907419.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:19.292Z,1528907419.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:19.669Z,1528907419.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:19.687Z,1528907419.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:20.068Z,1528907420.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:20.086Z,1528907420.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:20.469Z,1528907420.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:20.487Z,1528907420.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:20.877Z,1528907420.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:20.895Z,1528907420.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:21.277Z,1528907421.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:21.294Z,1528907421.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:21.678Z,1528907421.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:21.700Z,1528907421.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:22.067Z,1528907422.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:22.089Z,1528907422.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:22.469Z,1528907422.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:22.487Z,1528907422.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:22.870Z,1528907422.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:22.888Z,1528907422.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:23.270Z,1528907423.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:23.287Z,1528907423.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:23.668Z,1528907423.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:23.687Z,1528907423.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:24.077Z,1528907424.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:24.095Z,1528907424.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:24.477Z,1528907424.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:24.495Z,1528907424.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:24.874Z,1528907424.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:24.896Z,1528907424.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:25.270Z,1528907425.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:25.288Z,1528907425.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:25.663Z,1528907425.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:25.687Z,1528907425.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:26.068Z,1528907426.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:26.106Z,1528907426.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:26.472Z,1528907426.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:26.491Z,1528907426.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:26.879Z,1528907426.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:26.897Z,1528907426.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:27.282Z,1528907427.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:27.308Z,1528907427.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:27.684Z,1528907427.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:27.708Z,1528907427.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:28.070Z,1528907428.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:28.092Z,1528907428.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:28.467Z,1528907428.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:28.493Z,1528907428.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:28.870Z,1528907428.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:28.889Z,1528907428.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:29.270Z,1528907429.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:29.292Z,1528907429.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:29.659Z,1528907429.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:29.698Z,1528907429.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:30.084Z,1528907430.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:30.103Z,1528907430.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:30.482Z,1528907430.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:30.501Z,1528907430.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:30.879Z,1528907430.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:30.898Z,1528907430.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:31.264Z,1528907431.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:31.302Z,1528907431.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:31.663Z,1528907431.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:31.694Z,1528907431.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:31.696Z,1528907431.696 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T16:30:31.701Z,1528907431.701 [Default:CheckIn:C.Wait] Stopped
2018-06-13T16:30:31.701Z,1528907431.701 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T16:30:31.701Z,1528907431.701 [Default:CheckIn:D] Running Loop=1
2018-06-13T16:30:32.068Z,1528907432.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:32.109Z,1528907432.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:32.117Z,1528907432.117 [Default:CheckIn:D] Stopped
2018-06-13T16:30:32.117Z,1528907432.117 [Default:CheckIn:E] Running Loop=1
2018-06-13T16:30:35.179Z,1528907435.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:35.211Z,1528907435.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:35.215Z,1528907435.215 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 783.311133 min 
2018-06-13T16:30:35.215Z,1528907435.215 [Default:CheckIn:E] Stopped
2018-06-13T16:30:35.215Z,1528907435.215 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T16:30:35.215Z,1528907435.215 [Default:CheckIn] Stopped
2018-06-13T16:30:35.215Z,1528907435.215 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T16:30:35.215Z,1528907435.215 [Default:CheckIn](INFO): Running loop #76
2018-06-13T16:30:35.216Z,1528907435.216 [Default:CheckIn] Running Loop=76
2018-06-13T16:30:35.216Z,1528907435.216 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T16:30:35.216Z,1528907435.216 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T16:30:35.330Z,1528907435.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:35.369Z,1528907435.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:35.738Z,1528907435.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:35.767Z,1528907435.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:36.138Z,1528907436.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:36.176Z,1528907436.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:36.519Z,1528907436.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:36.537Z,1528907436.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:36.923Z,1528907436.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:36.964Z,1528907436.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:37.324Z,1528907437.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:37.342Z,1528907437.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:37.722Z,1528907437.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:37.740Z,1528907437.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:38.130Z,1528907438.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:38.148Z,1528907438.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:38.538Z,1528907438.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:38.555Z,1528907438.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:38.934Z,1528907438.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:38.951Z,1528907438.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:39.327Z,1528907439.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:39.358Z,1528907439.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:39.723Z,1528907439.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:39.741Z,1528907439.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:40.127Z,1528907440.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:40.145Z,1528907440.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:40.524Z,1528907440.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:40.554Z,1528907440.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:40.935Z,1528907440.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:40.954Z,1528907440.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:41.334Z,1528907441.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:41.352Z,1528907441.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:41.732Z,1528907441.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:41.750Z,1528907441.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:42.122Z,1528907442.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:42.141Z,1528907442.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:42.515Z,1528907442.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:42.552Z,1528907442.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:42.922Z,1528907442.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:42.947Z,1528907442.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:43.326Z,1528907443.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:43.344Z,1528907443.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:43.723Z,1528907443.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:43.746Z,1528907443.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:44.135Z,1528907444.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:44.154Z,1528907444.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:44.540Z,1528907444.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:44.558Z,1528907444.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:44.935Z,1528907444.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:44.953Z,1528907444.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:45.319Z,1528907445.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:45.356Z,1528907445.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:45.715Z,1528907445.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:45.749Z,1528907445.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:46.120Z,1528907446.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:46.148Z,1528907446.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:46.515Z,1528907446.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:46.552Z,1528907446.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:46.940Z,1528907446.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:46.958Z,1528907446.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:47.329Z,1528907447.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:47.368Z,1528907447.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:47.729Z,1528907447.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:47.764Z,1528907447.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:48.115Z,1528907448.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:48.141Z,1528907448.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:48.519Z,1528907448.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:48.553Z,1528907448.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:48.919Z,1528907448.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:48.940Z,1528907448.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:49.323Z,1528907449.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:49.342Z,1528907449.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:49.722Z,1528907449.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:49.740Z,1528907449.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:50.133Z,1528907450.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:50.171Z,1528907450.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:50.533Z,1528907450.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:50.567Z,1528907450.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:50.934Z,1528907450.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:50.972Z,1528907450.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:51.323Z,1528907451.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:51.348Z,1528907451.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:51.725Z,1528907451.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:51.743Z,1528907451.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:52.124Z,1528907452.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:52.142Z,1528907452.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:52.524Z,1528907452.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:52.542Z,1528907452.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:52.929Z,1528907452.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:52.948Z,1528907452.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:53.333Z,1528907453.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:53.351Z,1528907453.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:53.730Z,1528907453.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:53.748Z,1528907453.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:54.121Z,1528907454.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:54.139Z,1528907454.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:54.523Z,1528907454.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:54.541Z,1528907454.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:54.924Z,1528907454.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:54.942Z,1528907454.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:55.325Z,1528907455.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:55.343Z,1528907455.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:55.724Z,1528907455.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:55.742Z,1528907455.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:56.129Z,1528907456.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:56.148Z,1528907456.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:56.529Z,1528907456.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:56.547Z,1528907456.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:56.930Z,1528907456.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:56.947Z,1528907456.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:57.323Z,1528907457.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:57.348Z,1528907457.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:57.724Z,1528907457.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:57.743Z,1528907457.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:58.125Z,1528907458.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:58.143Z,1528907458.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:58.524Z,1528907458.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:58.542Z,1528907458.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:58.929Z,1528907458.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:58.947Z,1528907458.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:59.333Z,1528907459.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:59.351Z,1528907459.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:30:59.730Z,1528907459.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:30:59.753Z,1528907459.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:00.126Z,1528907460.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:00.144Z,1528907460.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:00.523Z,1528907460.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:00.554Z,1528907460.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:00.924Z,1528907460.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:00.942Z,1528907460.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:01.323Z,1528907461.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:01.341Z,1528907461.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:01.723Z,1528907461.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:01.745Z,1528907461.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:02.130Z,1528907462.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:02.152Z,1528907462.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:02.534Z,1528907462.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:02.552Z,1528907462.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:02.930Z,1528907462.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:02.952Z,1528907462.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:03.328Z,1528907463.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:03.346Z,1528907463.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:03.722Z,1528907463.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:03.740Z,1528907463.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:04.126Z,1528907464.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:04.143Z,1528907464.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:04.523Z,1528907464.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:04.557Z,1528907464.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:04.935Z,1528907464.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:04.952Z,1528907464.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:05.339Z,1528907465.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:05.357Z,1528907465.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:05.735Z,1528907465.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:05.753Z,1528907465.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:06.115Z,1528907466.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:06.149Z,1528907466.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:06.542Z,1528907466.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:06.588Z,1528907466.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:06.915Z,1528907466.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:06.952Z,1528907466.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:07.320Z,1528907467.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:07.349Z,1528907467.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:07.719Z,1528907467.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:07.754Z,1528907467.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:08.135Z,1528907468.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:08.153Z,1528907468.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:08.537Z,1528907468.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:08.555Z,1528907468.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:08.940Z,1528907468.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:08.964Z,1528907468.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:09.319Z,1528907469.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:09.358Z,1528907469.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:09.723Z,1528907469.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:09.752Z,1528907469.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:10.120Z,1528907470.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:10.150Z,1528907470.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:10.519Z,1528907470.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:10.552Z,1528907470.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:10.937Z,1528907470.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:10.955Z,1528907470.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:11.339Z,1528907471.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:11.358Z,1528907471.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:11.734Z,1528907471.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:11.771Z,1528907471.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:12.120Z,1528907472.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:12.151Z,1528907472.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:12.519Z,1528907472.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:12.551Z,1528907472.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:12.919Z,1528907472.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:12.956Z,1528907472.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:13.320Z,1528907473.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:13.346Z,1528907473.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:13.719Z,1528907473.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:13.756Z,1528907473.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:14.130Z,1528907474.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:14.164Z,1528907474.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:14.541Z,1528907474.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:14.559Z,1528907474.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:14.929Z,1528907474.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:14.964Z,1528907474.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:15.319Z,1528907475.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:15.353Z,1528907475.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:15.719Z,1528907475.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:15.753Z,1528907475.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:16.120Z,1528907476.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:16.137Z,1528907476.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:16.519Z,1528907476.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:16.536Z,1528907476.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:16.937Z,1528907476.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:16.966Z,1528907476.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:17.333Z,1528907477.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:17.366Z,1528907477.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:17.733Z,1528907477.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:17.772Z,1528907477.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:18.120Z,1528907478.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:18.138Z,1528907478.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:18.523Z,1528907478.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:18.540Z,1528907478.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:18.922Z,1528907478.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:18.948Z,1528907478.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:19.322Z,1528907479.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:19.340Z,1528907479.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:19.723Z,1528907479.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:19.741Z,1528907479.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:20.134Z,1528907480.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:20.152Z,1528907480.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:20.530Z,1528907480.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:20.548Z,1528907480.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:20.934Z,1528907480.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:20.953Z,1528907480.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:21.324Z,1528907481.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:21.342Z,1528907481.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:21.726Z,1528907481.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:21.745Z,1528907481.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:22.124Z,1528907482.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:22.142Z,1528907482.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:22.524Z,1528907482.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:22.548Z,1528907482.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:22.929Z,1528907482.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:22.947Z,1528907482.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:23.337Z,1528907483.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:23.355Z,1528907483.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:23.731Z,1528907483.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:23.748Z,1528907483.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:24.126Z,1528907484.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:24.144Z,1528907484.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:24.525Z,1528907484.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:24.543Z,1528907484.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:24.934Z,1528907484.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:24.952Z,1528907484.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:25.334Z,1528907485.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:25.352Z,1528907485.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:25.734Z,1528907485.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:25.760Z,1528907485.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:26.123Z,1528907486.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:26.147Z,1528907486.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:26.530Z,1528907486.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:26.548Z,1528907486.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:26.934Z,1528907486.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:26.956Z,1528907486.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:27.334Z,1528907487.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:27.356Z,1528907487.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:27.735Z,1528907487.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:27.752Z,1528907487.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:28.125Z,1528907488.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:28.143Z,1528907488.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:28.518Z,1528907488.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:28.556Z,1528907488.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:28.936Z,1528907488.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:28.954Z,1528907488.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:29.339Z,1528907489.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:29.356Z,1528907489.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:29.735Z,1528907489.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:29.753Z,1528907489.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:30.116Z,1528907490.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:30.146Z,1528907490.146 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:30.146Z,1528907490.146 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 261
2018-06-13T16:31:30.146Z,1528907490.146 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:31:30.148Z,1528907490.148 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:30.148Z,1528907490.148 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 261
2018-06-13T16:31:30.148Z,1528907490.148 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:31:30.154Z,1528907490.154 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:30.154Z,1528907490.154 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 261
2018-06-13T16:31:30.154Z,1528907490.154 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:31:30.233Z,1528907490.233 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:31:30.233Z,1528907490.233 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:31:30.233Z,1528907490.233 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:31:30.514Z,1528907490.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:30.633Z,1528907490.633 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:31:30.633Z,1528907490.633 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 261
2018-06-13T16:31:30.634Z,1528907490.634 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:31:30.634Z,1528907490.634 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 261
2018-06-13T16:31:30.634Z,1528907490.634 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:31:30.634Z,1528907490.634 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 261
2018-06-13T16:31:30.932Z,1528907490.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:30.949Z,1528907490.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:31:30.949Z,1528907490.949 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:31:30.950Z,1528907490.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:31:30.950Z,1528907490.950 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:31:30.950Z,1528907490.950 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:31:30.951Z,1528907490.951 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:31:30.951Z,1528907490.951 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:31:30.951Z,1528907490.951 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:31:30.952Z,1528907490.952 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:31:31.333Z,1528907491.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:31.369Z,1528907491.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:31:31.370Z,1528907491.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:31.733Z,1528907491.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:31.768Z,1528907491.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:31:31.769Z,1528907491.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:32.124Z,1528907492.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:32.161Z,1528907492.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:31:32.162Z,1528907492.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:35.238Z,1528907495.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:35.264Z,1528907495.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-06-13T16:31:35.265Z,1528907495.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:35.398Z,1528907495.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:35.432Z,1528907495.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T16:31:35.433Z,1528907495.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:35.799Z,1528907495.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:35.817Z,1528907495.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T16:31:35.818Z,1528907495.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:36.196Z,1528907496.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:36.215Z,1528907496.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T16:31:36.216Z,1528907496.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:36.575Z,1528907496.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:36.609Z,1528907496.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T16:31:36.610Z,1528907496.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:36.975Z,1528907496.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:36.992Z,1528907496.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:31:37.017Z,1528907497.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:37.376Z,1528907497.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:37.409Z,1528907497.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:31:37.410Z,1528907497.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:37.775Z,1528907497.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:37.792Z,1528907497.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:31:37.793Z,1528907497.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:38.189Z,1528907498.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:38.224Z,1528907498.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T16:31:38.225Z,1528907498.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:38.593Z,1528907498.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:38.623Z,1528907498.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T16:31:38.624Z,1528907498.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:38.989Z,1528907498.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:39.027Z,1528907499.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T16:31:39.028Z,1528907499.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:39.379Z,1528907499.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:39.396Z,1528907499.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T16:31:39.398Z,1528907499.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:39.776Z,1528907499.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:39.794Z,1528907499.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:31:39.795Z,1528907499.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:40.179Z,1528907500.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:40.196Z,1528907500.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T16:31:40.198Z,1528907500.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:40.578Z,1528907500.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:40.596Z,1528907500.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T16:31:40.596Z,1528907500.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:40.989Z,1528907500.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:41.023Z,1528907501.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T16:31:41.024Z,1528907501.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:41.390Z,1528907501.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:41.408Z,1528907501.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T16:31:41.429Z,1528907501.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:41.786Z,1528907501.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:41.804Z,1528907501.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T16:31:41.805Z,1528907501.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:42.175Z,1528907502.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:42.192Z,1528907502.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:31:42.194Z,1528907502.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:42.579Z,1528907502.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:42.596Z,1528907502.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T16:31:42.598Z,1528907502.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:42.978Z,1528907502.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:42.996Z,1528907502.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T16:31:42.997Z,1528907502.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:43.378Z,1528907503.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:43.396Z,1528907503.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T16:31:43.398Z,1528907503.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:43.778Z,1528907503.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:43.796Z,1528907503.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T16:31:43.796Z,1528907503.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:44.189Z,1528907504.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:44.224Z,1528907504.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T16:31:44.229Z,1528907504.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:44.585Z,1528907504.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:44.603Z,1528907504.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T16:31:44.604Z,1528907504.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:44.989Z,1528907504.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:45.007Z,1528907505.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T16:31:45.008Z,1528907505.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:45.381Z,1528907505.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:45.399Z,1528907505.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T16:31:45.400Z,1528907505.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:45.780Z,1528907505.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:45.798Z,1528907505.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T16:31:45.799Z,1528907505.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:46.180Z,1528907506.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:46.205Z,1528907506.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T16:31:46.206Z,1528907506.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:46.581Z,1528907506.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:46.599Z,1528907506.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T16:31:46.600Z,1528907506.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:46.985Z,1528907506.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:47.003Z,1528907507.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T16:31:47.004Z,1528907507.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:47.389Z,1528907507.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:47.407Z,1528907507.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T16:31:47.408Z,1528907507.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:47.786Z,1528907507.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:47.804Z,1528907507.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T16:31:47.805Z,1528907507.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:48.180Z,1528907508.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:48.199Z,1528907508.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T16:31:48.200Z,1528907508.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:48.581Z,1528907508.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:48.599Z,1528907508.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T16:31:48.600Z,1528907508.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:48.981Z,1528907508.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:48.999Z,1528907508.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T16:31:49.000Z,1528907509.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:49.378Z,1528907509.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:49.396Z,1528907509.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T16:31:49.397Z,1528907509.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:49.781Z,1528907509.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:49.799Z,1528907509.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T16:31:49.800Z,1528907509.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:50.186Z,1528907510.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:50.204Z,1528907510.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:50.585Z,1528907510.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:50.603Z,1528907510.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:50.986Z,1528907510.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:51.005Z,1528907511.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:51.381Z,1528907511.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:51.400Z,1528907511.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:51.779Z,1528907511.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:51.796Z,1528907511.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:52.181Z,1528907512.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:52.199Z,1528907512.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:52.581Z,1528907512.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:52.600Z,1528907512.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:52.985Z,1528907512.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:53.005Z,1528907513.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:53.389Z,1528907513.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:53.408Z,1528907513.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:53.787Z,1528907513.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:53.805Z,1528907513.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:54.178Z,1528907514.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:54.195Z,1528907514.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:54.579Z,1528907514.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:54.612Z,1528907514.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:54.979Z,1528907514.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:55.012Z,1528907515.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:55.379Z,1528907515.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:55.398Z,1528907515.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:55.782Z,1528907515.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:55.800Z,1528907515.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:56.186Z,1528907516.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:56.212Z,1528907516.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:56.587Z,1528907516.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:56.606Z,1528907516.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:56.990Z,1528907516.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:57.008Z,1528907517.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:57.379Z,1528907517.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:57.412Z,1528907517.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:57.782Z,1528907517.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:57.801Z,1528907517.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:58.182Z,1528907518.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:58.201Z,1528907518.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:58.579Z,1528907518.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:58.616Z,1528907518.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:58.991Z,1528907518.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:59.011Z,1528907519.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:59.395Z,1528907519.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:59.420Z,1528907519.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:31:59.792Z,1528907519.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:31:59.811Z,1528907519.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:00.172Z,1528907520.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:00.207Z,1528907520.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:00.575Z,1528907520.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:00.607Z,1528907520.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:00.992Z,1528907520.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:01.016Z,1528907521.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:01.396Z,1528907521.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:01.414Z,1528907521.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:01.797Z,1528907521.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:01.815Z,1528907521.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:02.172Z,1528907522.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:02.199Z,1528907522.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:02.572Z,1528907522.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:02.616Z,1528907522.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:02.989Z,1528907522.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:03.019Z,1528907523.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:03.389Z,1528907523.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:03.419Z,1528907523.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:03.786Z,1528907523.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:03.815Z,1528907523.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:04.176Z,1528907524.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:04.207Z,1528907524.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:04.571Z,1528907524.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:04.589Z,1528907524.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:04.990Z,1528907524.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:05.024Z,1528907525.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:05.394Z,1528907525.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:05.428Z,1528907525.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:05.789Z,1528907525.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:05.827Z,1528907525.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:06.175Z,1528907526.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:06.193Z,1528907526.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:06.578Z,1528907526.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:06.596Z,1528907526.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:06.984Z,1528907526.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:07.002Z,1528907527.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:07.386Z,1528907527.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:07.404Z,1528907527.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:07.781Z,1528907527.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:07.804Z,1528907527.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:08.179Z,1528907528.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:08.196Z,1528907528.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:08.578Z,1528907528.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:08.595Z,1528907528.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:08.985Z,1528907528.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:09.004Z,1528907529.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:09.385Z,1528907529.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:09.405Z,1528907529.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:09.789Z,1528907529.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:09.808Z,1528907529.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:10.181Z,1528907530.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:10.200Z,1528907530.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:10.580Z,1528907530.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:10.598Z,1528907530.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:10.988Z,1528907530.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:11.007Z,1528907531.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:11.389Z,1528907531.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:11.407Z,1528907531.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:11.785Z,1528907531.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:11.803Z,1528907531.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:12.182Z,1528907532.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:12.201Z,1528907532.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:12.581Z,1528907532.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:12.599Z,1528907532.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:12.985Z,1528907532.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:13.003Z,1528907533.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:13.385Z,1528907533.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:13.403Z,1528907533.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:13.786Z,1528907533.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:13.803Z,1528907533.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:14.177Z,1528907534.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:14.202Z,1528907534.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:14.578Z,1528907534.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:14.595Z,1528907534.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:14.993Z,1528907534.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:15.030Z,1528907535.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:15.389Z,1528907535.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:15.431Z,1528907535.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:15.785Z,1528907535.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:15.805Z,1528907535.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:16.180Z,1528907536.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:16.201Z,1528907536.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:16.580Z,1528907536.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:16.598Z,1528907536.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:16.990Z,1528907536.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:17.008Z,1528907537.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:17.389Z,1528907537.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:17.407Z,1528907537.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:17.785Z,1528907537.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:17.803Z,1528907537.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:18.181Z,1528907538.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:18.200Z,1528907538.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:18.581Z,1528907538.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:18.599Z,1528907538.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:18.982Z,1528907538.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:19.001Z,1528907539.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:19.389Z,1528907539.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:19.407Z,1528907539.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:19.786Z,1528907539.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:19.804Z,1528907539.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:20.180Z,1528907540.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:20.198Z,1528907540.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:20.580Z,1528907540.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:20.599Z,1528907540.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:20.989Z,1528907540.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:21.008Z,1528907541.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:21.385Z,1528907541.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:21.403Z,1528907541.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:21.789Z,1528907541.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:21.807Z,1528907541.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:22.176Z,1528907542.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:22.203Z,1528907542.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:22.575Z,1528907542.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:22.619Z,1528907542.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:22.988Z,1528907542.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:23.024Z,1528907543.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:23.385Z,1528907543.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:23.413Z,1528907543.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:23.786Z,1528907543.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:23.815Z,1528907543.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:24.176Z,1528907544.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:24.210Z,1528907544.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:24.575Z,1528907544.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:24.593Z,1528907544.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:24.984Z,1528907544.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:25.022Z,1528907545.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:25.393Z,1528907545.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:25.428Z,1528907545.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:25.789Z,1528907545.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:25.824Z,1528907545.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:26.178Z,1528907546.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:26.195Z,1528907546.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:26.579Z,1528907546.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:26.597Z,1528907546.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:26.989Z,1528907546.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:27.024Z,1528907547.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:27.389Z,1528907547.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:27.433Z,1528907547.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:27.789Z,1528907547.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:27.808Z,1528907547.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:28.180Z,1528907548.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:28.199Z,1528907548.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:28.580Z,1528907548.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:28.598Z,1528907548.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:28.989Z,1528907548.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:29.008Z,1528907549.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:29.389Z,1528907549.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:29.407Z,1528907549.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:29.786Z,1528907549.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:29.804Z,1528907549.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:30.182Z,1528907550.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:30.200Z,1528907550.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:30.581Z,1528907550.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:30.600Z,1528907550.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:30.985Z,1528907550.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:31.003Z,1528907551.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:31.398Z,1528907551.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:31.431Z,1528907551.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:31.790Z,1528907551.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:31.808Z,1528907551.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:32.186Z,1528907552.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:32.204Z,1528907552.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:32.585Z,1528907552.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:32.605Z,1528907552.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:32.989Z,1528907552.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:33.008Z,1528907553.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:33.393Z,1528907553.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:33.412Z,1528907553.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:36.502Z,1528907556.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:36.539Z,1528907556.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:36.656Z,1528907556.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:36.692Z,1528907556.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:37.055Z,1528907557.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:37.087Z,1528907557.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:37.456Z,1528907557.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:37.486Z,1528907557.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:37.851Z,1528907557.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:37.884Z,1528907557.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:38.261Z,1528907558.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:38.296Z,1528907558.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:38.666Z,1528907558.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:38.694Z,1528907558.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:39.061Z,1528907559.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:39.096Z,1528907559.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:39.455Z,1528907559.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:39.493Z,1528907559.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:39.851Z,1528907559.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:39.869Z,1528907559.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:40.256Z,1528907560.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:40.290Z,1528907560.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:40.655Z,1528907560.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:40.673Z,1528907560.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:41.066Z,1528907561.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:41.099Z,1528907561.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:41.466Z,1528907561.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:41.499Z,1528907561.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:41.866Z,1528907561.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:41.898Z,1528907561.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:42.255Z,1528907562.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:42.273Z,1528907562.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:42.654Z,1528907562.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:42.673Z,1528907562.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:43.054Z,1528907563.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:43.073Z,1528907563.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:43.455Z,1528907563.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:43.496Z,1528907563.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:43.854Z,1528907563.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:43.873Z,1528907563.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:44.270Z,1528907564.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:44.307Z,1528907564.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:44.669Z,1528907564.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:44.703Z,1528907564.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:45.066Z,1528907565.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:45.103Z,1528907565.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:45.455Z,1528907565.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:45.475Z,1528907565.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:45.858Z,1528907565.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:45.876Z,1528907565.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:46.258Z,1528907566.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:46.276Z,1528907566.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:46.657Z,1528907566.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:46.676Z,1528907566.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:47.066Z,1528907567.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:47.083Z,1528907567.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:47.461Z,1528907567.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:47.484Z,1528907567.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:47.862Z,1528907567.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:47.880Z,1528907567.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:48.260Z,1528907568.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:48.278Z,1528907568.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:48.656Z,1528907568.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:48.686Z,1528907568.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:49.064Z,1528907569.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:49.082Z,1528907569.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:49.463Z,1528907569.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:49.488Z,1528907569.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:49.863Z,1528907569.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:49.888Z,1528907569.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:50.250Z,1528907570.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:50.295Z,1528907570.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:50.658Z,1528907570.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:50.676Z,1528907570.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:51.067Z,1528907571.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:51.097Z,1528907571.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:51.472Z,1528907571.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:51.490Z,1528907571.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:51.868Z,1528907571.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:51.887Z,1528907571.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:52.255Z,1528907572.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:52.280Z,1528907572.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:52.654Z,1528907572.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:52.679Z,1528907572.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:53.069Z,1528907573.069 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:53.088Z,1528907573.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:53.468Z,1528907573.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:53.493Z,1528907573.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:53.867Z,1528907573.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:53.885Z,1528907573.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:54.259Z,1528907574.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:54.277Z,1528907574.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:54.658Z,1528907574.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:54.680Z,1528907574.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:55.062Z,1528907575.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:55.087Z,1528907575.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:55.468Z,1528907575.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:55.486Z,1528907575.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:55.871Z,1528907575.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:55.889Z,1528907575.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:56.258Z,1528907576.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:56.276Z,1528907576.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:56.647Z,1528907576.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:56.681Z,1528907576.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:57.071Z,1528907577.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:57.089Z,1528907577.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:57.471Z,1528907577.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:57.490Z,1528907577.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:57.873Z,1528907577.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:57.891Z,1528907577.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:58.247Z,1528907578.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:58.283Z,1528907578.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:58.651Z,1528907578.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:58.684Z,1528907578.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:59.068Z,1528907579.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:59.086Z,1528907579.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:59.471Z,1528907579.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:59.489Z,1528907579.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:32:59.863Z,1528907579.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:32:59.882Z,1528907579.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:00.251Z,1528907580.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:00.279Z,1528907580.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:00.651Z,1528907580.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:00.678Z,1528907580.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:01.067Z,1528907581.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:01.092Z,1528907581.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:01.468Z,1528907581.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:01.486Z,1528907581.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:01.870Z,1528907581.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:01.892Z,1528907581.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:02.252Z,1528907582.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:02.282Z,1528907582.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:02.651Z,1528907582.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:02.689Z,1528907582.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:03.061Z,1528907583.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:03.088Z,1528907583.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:03.465Z,1528907583.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:03.500Z,1528907583.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:03.861Z,1528907583.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:03.889Z,1528907583.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:04.251Z,1528907584.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:04.291Z,1528907584.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:04.651Z,1528907584.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:04.685Z,1528907584.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:05.061Z,1528907585.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:05.103Z,1528907585.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:05.469Z,1528907585.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:05.496Z,1528907585.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:05.866Z,1528907585.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:05.904Z,1528907585.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:06.252Z,1528907586.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:06.269Z,1528907586.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:06.655Z,1528907586.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:06.672Z,1528907586.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:07.065Z,1528907587.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:07.099Z,1528907587.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:07.465Z,1528907587.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:07.502Z,1528907587.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:07.865Z,1528907587.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:07.898Z,1528907587.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:08.255Z,1528907588.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:08.273Z,1528907588.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:08.654Z,1528907588.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:08.672Z,1528907588.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:09.065Z,1528907589.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:09.098Z,1528907589.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:09.465Z,1528907589.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:09.499Z,1528907589.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:09.865Z,1528907589.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:09.899Z,1528907589.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:10.255Z,1528907590.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:10.273Z,1528907590.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:10.654Z,1528907590.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:10.672Z,1528907590.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:11.061Z,1528907591.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:11.079Z,1528907591.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:11.466Z,1528907591.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:11.500Z,1528907591.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:11.865Z,1528907591.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:11.883Z,1528907591.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:12.255Z,1528907592.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:12.273Z,1528907592.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:12.656Z,1528907592.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:12.674Z,1528907592.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:13.065Z,1528907593.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:13.083Z,1528907593.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:13.461Z,1528907593.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:13.479Z,1528907593.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:13.862Z,1528907593.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:13.879Z,1528907593.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:14.256Z,1528907594.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:14.288Z,1528907594.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:14.657Z,1528907594.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:14.675Z,1528907594.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:15.061Z,1528907595.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:15.079Z,1528907595.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:15.465Z,1528907595.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:15.483Z,1528907595.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:15.861Z,1528907595.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:15.879Z,1528907595.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:16.256Z,1528907596.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:16.281Z,1528907596.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:16.657Z,1528907596.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:16.675Z,1528907596.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:17.061Z,1528907597.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:17.079Z,1528907597.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:17.465Z,1528907597.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:17.483Z,1528907597.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:17.862Z,1528907597.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:17.879Z,1528907597.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:18.258Z,1528907598.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:18.277Z,1528907598.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:18.658Z,1528907598.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:18.680Z,1528907598.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:19.065Z,1528907599.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:19.083Z,1528907599.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:19.461Z,1528907599.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:19.479Z,1528907599.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:19.862Z,1528907599.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:19.880Z,1528907599.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:20.259Z,1528907600.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:20.277Z,1528907600.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:20.654Z,1528907600.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:20.672Z,1528907600.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:21.067Z,1528907601.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:21.085Z,1528907601.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:21.466Z,1528907601.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:21.484Z,1528907601.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:21.863Z,1528907601.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:21.882Z,1528907601.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:22.258Z,1528907602.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:22.276Z,1528907602.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:22.657Z,1528907602.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:22.676Z,1528907602.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:23.064Z,1528907603.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:23.084Z,1528907603.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:23.466Z,1528907603.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:23.484Z,1528907603.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:23.866Z,1528907603.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:23.884Z,1528907603.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:24.259Z,1528907604.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:24.277Z,1528907604.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:24.658Z,1528907604.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:24.675Z,1528907604.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:25.057Z,1528907605.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:25.075Z,1528907605.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:25.464Z,1528907605.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:25.482Z,1528907605.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:25.870Z,1528907605.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:25.888Z,1528907605.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:26.265Z,1528907606.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:26.283Z,1528907606.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:26.656Z,1528907606.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:26.674Z,1528907606.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:27.055Z,1528907607.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:27.085Z,1528907607.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:27.450Z,1528907607.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:27.488Z,1528907607.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:27.847Z,1528907607.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:27.881Z,1528907607.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:28.272Z,1528907608.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:28.290Z,1528907608.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:28.673Z,1528907608.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:28.690Z,1528907608.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:29.068Z,1528907609.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:29.086Z,1528907609.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:29.451Z,1528907609.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:29.487Z,1528907609.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:29.851Z,1528907609.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:29.889Z,1528907609.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:30.247Z,1528907610.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:30.276Z,1528907610.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:30.651Z,1528907610.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:30.684Z,1528907610.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:31.051Z,1528907611.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:31.085Z,1528907611.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:31.472Z,1528907611.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:31.494Z,1528907611.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:31.874Z,1528907611.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:31.897Z,1528907611.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:32.274Z,1528907612.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:32.297Z,1528907612.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:35.371Z,1528907615.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:35.389Z,1528907615.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:35.492Z,1528907615.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:35.540Z,1528907615.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:35.916Z,1528907615.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:35.934Z,1528907615.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:36.319Z,1528907616.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:36.384Z,1528907616.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:36.706Z,1528907616.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:36.734Z,1528907616.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:37.091Z,1528907617.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:37.132Z,1528907617.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:37.500Z,1528907617.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:37.533Z,1528907617.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:37.895Z,1528907617.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:37.935Z,1528907617.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:38.306Z,1528907618.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:38.344Z,1528907618.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:38.704Z,1528907618.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:38.735Z,1528907618.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:39.106Z,1528907619.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:39.139Z,1528907619.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:39.496Z,1528907619.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:39.533Z,1528907619.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:39.891Z,1528907619.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:39.909Z,1528907619.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:40.295Z,1528907620.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:40.334Z,1528907620.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:40.695Z,1528907620.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:40.736Z,1528907620.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:41.105Z,1528907621.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:41.133Z,1528907621.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:41.510Z,1528907621.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:41.538Z,1528907621.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:41.906Z,1528907621.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:41.934Z,1528907621.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:42.295Z,1528907622.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:42.330Z,1528907622.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:42.695Z,1528907622.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:42.736Z,1528907622.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:43.106Z,1528907623.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:43.132Z,1528907623.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:43.509Z,1528907623.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:43.544Z,1528907623.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:43.910Z,1528907623.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:43.927Z,1528907623.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:44.300Z,1528907624.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:44.318Z,1528907624.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:44.698Z,1528907624.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:44.716Z,1528907624.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:45.106Z,1528907625.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:45.124Z,1528907625.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:45.510Z,1528907625.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:45.528Z,1528907625.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:45.905Z,1528907625.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:45.928Z,1528907625.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:46.301Z,1528907626.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:46.319Z,1528907626.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:46.700Z,1528907626.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:46.718Z,1528907626.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:47.105Z,1528907627.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:47.123Z,1528907627.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:47.510Z,1528907627.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:47.527Z,1528907627.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:47.906Z,1528907627.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:47.928Z,1528907627.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:48.303Z,1528907628.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:48.321Z,1528907628.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:48.699Z,1528907628.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:48.721Z,1528907628.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:49.106Z,1528907629.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:49.132Z,1528907629.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:49.506Z,1528907629.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:49.524Z,1528907629.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:49.906Z,1528907629.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:49.928Z,1528907629.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:50.299Z,1528907630.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:50.332Z,1528907630.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:50.698Z,1528907630.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:50.715Z,1528907630.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:51.106Z,1528907631.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:51.124Z,1528907631.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:51.510Z,1528907631.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:51.527Z,1528907631.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:51.906Z,1528907631.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:51.924Z,1528907631.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:52.301Z,1528907632.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:52.319Z,1528907632.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:52.702Z,1528907632.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:52.720Z,1528907632.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:53.098Z,1528907633.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:53.116Z,1528907633.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:53.506Z,1528907633.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:53.524Z,1528907633.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:53.910Z,1528907633.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:53.928Z,1528907633.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:54.307Z,1528907634.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:54.324Z,1528907634.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:54.699Z,1528907634.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:54.722Z,1528907634.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:55.099Z,1528907635.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:55.131Z,1528907635.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:55.498Z,1528907635.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:55.516Z,1528907635.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:55.904Z,1528907635.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:55.922Z,1528907635.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:56.306Z,1528907636.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:56.328Z,1528907636.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:56.706Z,1528907636.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:56.724Z,1528907636.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:57.106Z,1528907637.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:57.128Z,1528907637.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:57.499Z,1528907637.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:57.529Z,1528907637.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:57.898Z,1528907637.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:57.920Z,1528907637.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:58.299Z,1528907638.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:58.323Z,1528907638.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:58.699Z,1528907638.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:58.724Z,1528907638.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:59.098Z,1528907639.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:59.116Z,1528907639.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:59.509Z,1528907639.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:59.527Z,1528907639.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:33:59.911Z,1528907639.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:33:59.930Z,1528907639.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:00.311Z,1528907640.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:00.329Z,1528907640.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:00.702Z,1528907640.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:00.719Z,1528907640.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:01.105Z,1528907641.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:01.123Z,1528907641.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:01.496Z,1528907641.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:01.522Z,1528907641.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:01.899Z,1528907641.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:01.923Z,1528907641.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:02.310Z,1528907642.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:02.336Z,1528907642.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:02.711Z,1528907642.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:02.729Z,1528907642.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:03.110Z,1528907643.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:03.128Z,1528907643.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:03.494Z,1528907643.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:03.534Z,1528907643.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:03.898Z,1528907643.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:03.916Z,1528907643.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:04.299Z,1528907644.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:04.323Z,1528907644.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:04.699Z,1528907644.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:04.731Z,1528907644.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:05.102Z,1528907645.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:05.120Z,1528907645.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:05.514Z,1528907645.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:05.533Z,1528907645.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:05.914Z,1528907645.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:05.932Z,1528907645.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:06.312Z,1528907646.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:06.330Z,1528907646.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:06.699Z,1528907646.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:06.723Z,1528907646.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:07.099Z,1528907647.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:07.123Z,1528907647.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:07.492Z,1528907647.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:07.523Z,1528907647.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:07.899Z,1528907647.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:07.924Z,1528907647.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:08.312Z,1528907648.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:08.331Z,1528907648.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:08.712Z,1528907648.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:08.730Z,1528907648.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:09.117Z,1528907649.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:09.134Z,1528907649.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:09.492Z,1528907649.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:09.534Z,1528907649.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:09.892Z,1528907649.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:09.926Z,1528907649.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:10.296Z,1528907650.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:10.328Z,1528907650.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:10.696Z,1528907650.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:10.726Z,1528907650.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:11.091Z,1528907651.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:11.133Z,1528907651.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:11.518Z,1528907651.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:11.540Z,1528907651.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:11.912Z,1528907651.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:11.930Z,1528907651.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:12.316Z,1528907652.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:12.334Z,1528907652.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:12.695Z,1528907652.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:12.729Z,1528907652.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:13.095Z,1528907653.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:13.132Z,1528907653.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:13.491Z,1528907653.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:13.535Z,1528907653.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:13.895Z,1528907653.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:13.932Z,1528907653.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:14.308Z,1528907654.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:14.327Z,1528907654.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:14.712Z,1528907654.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:14.730Z,1528907654.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:15.111Z,1528907655.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:15.129Z,1528907655.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:15.491Z,1528907655.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:15.527Z,1528907655.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:15.891Z,1528907655.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:15.925Z,1528907655.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:16.296Z,1528907656.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:16.332Z,1528907656.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:16.695Z,1528907656.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:16.727Z,1528907656.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:17.095Z,1528907657.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:17.128Z,1528907657.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:17.512Z,1528907657.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:17.536Z,1528907657.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:17.915Z,1528907657.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:17.940Z,1528907657.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:18.312Z,1528907658.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:18.331Z,1528907658.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:18.695Z,1528907658.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:18.732Z,1528907658.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:19.095Z,1528907659.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:19.128Z,1528907659.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:19.491Z,1528907659.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:19.522Z,1528907659.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:19.895Z,1528907659.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:19.928Z,1528907659.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:20.301Z,1528907660.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:20.339Z,1528907660.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:20.709Z,1528907660.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:20.737Z,1528907660.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:21.106Z,1528907661.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:21.134Z,1528907661.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:21.491Z,1528907661.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:21.508Z,1528907661.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:21.895Z,1528907661.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:21.925Z,1528907661.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:22.297Z,1528907662.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:22.316Z,1528907662.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:22.699Z,1528907662.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:22.717Z,1528907662.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:23.095Z,1528907663.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:23.113Z,1528907663.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:23.510Z,1528907663.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:23.544Z,1528907663.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:23.909Z,1528907663.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:23.944Z,1528907663.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:24.309Z,1528907664.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:24.348Z,1528907664.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:24.699Z,1528907664.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:24.716Z,1528907664.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:25.098Z,1528907665.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:25.115Z,1528907665.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:25.498Z,1528907665.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:25.516Z,1528907665.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:25.899Z,1528907665.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:25.916Z,1528907665.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:26.309Z,1528907666.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:26.347Z,1528907666.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:26.709Z,1528907666.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:26.743Z,1528907666.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:27.109Z,1528907667.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:27.142Z,1528907667.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:27.498Z,1528907667.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:27.515Z,1528907667.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:27.898Z,1528907667.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:27.916Z,1528907667.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:28.298Z,1528907668.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:28.316Z,1528907668.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:28.699Z,1528907668.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:28.717Z,1528907668.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:29.098Z,1528907669.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:29.115Z,1528907669.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:29.509Z,1528907669.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:29.542Z,1528907669.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:29.909Z,1528907669.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:29.943Z,1528907669.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:30.309Z,1528907670.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:30.343Z,1528907670.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:30.699Z,1528907670.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:30.716Z,1528907670.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:31.097Z,1528907671.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:31.115Z,1528907671.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:31.115Z,1528907671.115 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 262
2018-06-13T16:34:31.115Z,1528907671.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:34:31.117Z,1528907671.117 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:31.117Z,1528907671.117 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 262
2018-06-13T16:34:31.117Z,1528907671.117 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:34:31.118Z,1528907671.118 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:31.119Z,1528907671.119 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 262
2018-06-13T16:34:31.119Z,1528907671.119 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:34:31.241Z,1528907671.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:34:31.241Z,1528907671.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:34:31.241Z,1528907671.241 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:34:31.498Z,1528907671.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:31.593Z,1528907671.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:34:31.593Z,1528907671.593 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 262
2018-06-13T16:34:31.594Z,1528907671.594 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:34:31.594Z,1528907671.594 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 262
2018-06-13T16:34:31.594Z,1528907671.594 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:34:31.594Z,1528907671.594 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 262
2018-06-13T16:34:31.902Z,1528907671.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:31.919Z,1528907671.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:34:31.919Z,1528907671.919 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:34:31.919Z,1528907671.919 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:34:31.920Z,1528907671.920 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:34:31.920Z,1528907671.920 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:34:31.920Z,1528907671.920 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:34:31.921Z,1528907671.921 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:34:31.921Z,1528907671.921 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:34:31.922Z,1528907671.922 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:34:32.308Z,1528907672.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:32.340Z,1528907672.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:34:32.341Z,1528907672.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:35.422Z,1528907675.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:35.440Z,1528907675.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-06-13T16:34:35.441Z,1528907675.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:35.575Z,1528907675.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:35.615Z,1528907675.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T16:34:35.616Z,1528907675.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:35.961Z,1528907675.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:35.978Z,1528907675.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T16:34:35.979Z,1528907675.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:36.362Z,1528907676.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:36.384Z,1528907676.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T16:34:36.385Z,1528907676.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:36.760Z,1528907676.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:36.777Z,1528907676.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T16:34:36.778Z,1528907676.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:37.151Z,1528907677.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:37.187Z,1528907677.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T16:34:37.187Z,1528907677.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:37.571Z,1528907677.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:37.588Z,1528907677.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T16:34:37.589Z,1528907677.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:37.971Z,1528907677.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:37.988Z,1528907677.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T16:34:37.989Z,1528907677.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:38.367Z,1528907678.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:38.383Z,1528907678.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T16:34:38.384Z,1528907678.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:38.751Z,1528907678.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:38.780Z,1528907678.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T16:34:38.781Z,1528907678.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:39.151Z,1528907679.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:39.186Z,1528907679.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T16:34:39.187Z,1528907679.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:39.552Z,1528907679.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:39.588Z,1528907679.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T16:34:39.588Z,1528907679.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:39.951Z,1528907679.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:39.988Z,1528907679.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T16:34:39.993Z,1528907679.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:40.367Z,1528907680.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:40.385Z,1528907680.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T16:34:40.386Z,1528907680.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:40.767Z,1528907680.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:40.785Z,1528907680.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T16:34:40.785Z,1528907680.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:41.172Z,1528907681.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:41.190Z,1528907681.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T16:34:41.191Z,1528907681.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:41.552Z,1528907681.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:41.583Z,1528907681.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T16:34:41.584Z,1528907681.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:41.951Z,1528907681.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:41.978Z,1528907681.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T16:34:41.979Z,1528907681.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:42.351Z,1528907682.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:42.379Z,1528907682.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T16:34:42.380Z,1528907682.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:42.751Z,1528907682.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:42.778Z,1528907682.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T16:34:42.779Z,1528907682.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:43.154Z,1528907683.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:43.181Z,1528907683.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T16:34:43.182Z,1528907683.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:43.574Z,1528907683.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:43.591Z,1528907683.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T16:34:43.592Z,1528907683.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:43.971Z,1528907683.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:43.988Z,1528907683.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T16:34:43.989Z,1528907683.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:44.368Z,1528907684.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:44.385Z,1528907684.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T16:34:44.386Z,1528907684.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:44.751Z,1528907684.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:44.779Z,1528907684.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T16:34:44.780Z,1528907684.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:45.155Z,1528907685.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:45.182Z,1528907685.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T16:34:45.183Z,1528907685.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:45.552Z,1528907685.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:45.588Z,1528907685.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T16:34:45.589Z,1528907685.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:45.951Z,1528907685.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:45.987Z,1528907685.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T16:34:45.988Z,1528907685.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:46.372Z,1528907686.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:46.390Z,1528907686.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T16:34:46.391Z,1528907686.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:46.771Z,1528907686.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:46.789Z,1528907686.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T16:34:46.790Z,1528907686.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:47.173Z,1528907687.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:47.190Z,1528907687.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T16:34:47.191Z,1528907687.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:47.551Z,1528907687.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:47.592Z,1528907687.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T16:34:47.594Z,1528907687.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:47.951Z,1528907687.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:47.979Z,1528907687.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T16:34:47.980Z,1528907687.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:48.352Z,1528907688.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:48.381Z,1528907688.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T16:34:48.382Z,1528907688.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:48.751Z,1528907688.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:48.784Z,1528907688.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T16:34:48.784Z,1528907688.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:49.151Z,1528907689.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:49.179Z,1528907689.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T16:34:49.180Z,1528907689.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:49.572Z,1528907689.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:49.590Z,1528907689.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T16:34:49.591Z,1528907689.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:49.971Z,1528907689.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:49.989Z,1528907689.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T16:34:49.990Z,1528907689.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:50.369Z,1528907690.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:50.387Z,1528907690.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T16:34:50.388Z,1528907690.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:50.751Z,1528907690.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:50.779Z,1528907690.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T16:34:50.780Z,1528907690.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:51.151Z,1528907691.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:51.178Z,1528907691.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:51.552Z,1528907691.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:51.580Z,1528907691.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:51.951Z,1528907691.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:51.978Z,1528907691.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:52.367Z,1528907692.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:52.386Z,1528907692.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:52.772Z,1528907692.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:52.790Z,1528907692.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:53.166Z,1528907693.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:53.190Z,1528907693.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:53.555Z,1528907693.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:53.582Z,1528907693.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:53.952Z,1528907693.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:53.994Z,1528907693.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:54.351Z,1528907694.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:54.386Z,1528907694.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:54.752Z,1528907694.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:54.792Z,1528907694.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:55.151Z,1528907695.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:55.190Z,1528907695.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:55.573Z,1528907695.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:55.591Z,1528907695.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:55.972Z,1528907695.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:55.990Z,1528907695.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:56.369Z,1528907696.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:56.387Z,1528907696.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:56.747Z,1528907696.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:56.773Z,1528907696.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:57.151Z,1528907697.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:57.188Z,1528907697.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:57.552Z,1528907697.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:57.586Z,1528907697.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:57.955Z,1528907697.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:57.972Z,1528907697.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:58.365Z,1528907698.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:58.403Z,1528907698.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:58.765Z,1528907698.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:58.799Z,1528907698.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:59.161Z,1528907699.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:59.179Z,1528907699.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:59.554Z,1528907699.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:59.576Z,1528907699.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:34:59.955Z,1528907699.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:34:59.980Z,1528907699.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:00.354Z,1528907700.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:00.371Z,1528907700.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:00.756Z,1528907700.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:00.777Z,1528907700.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:01.156Z,1528907701.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:01.174Z,1528907701.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:01.565Z,1528907701.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:01.583Z,1528907701.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:01.966Z,1528907701.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:01.984Z,1528907701.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:02.362Z,1528907702.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:02.379Z,1528907702.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:02.757Z,1528907702.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:02.774Z,1528907702.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:03.156Z,1528907703.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:03.174Z,1528907703.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:03.556Z,1528907703.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:03.574Z,1528907703.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:03.954Z,1528907703.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:03.971Z,1528907703.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:04.362Z,1528907704.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:04.379Z,1528907704.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:04.766Z,1528907704.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:04.783Z,1528907704.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:05.161Z,1528907705.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:05.180Z,1528907705.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:05.556Z,1528907705.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:05.574Z,1528907705.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:05.955Z,1528907705.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:05.972Z,1528907705.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:06.356Z,1528907706.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:06.374Z,1528907706.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:06.756Z,1528907706.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:06.775Z,1528907706.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:07.152Z,1528907707.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:07.170Z,1528907707.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:07.561Z,1528907707.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:07.579Z,1528907707.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:07.965Z,1528907707.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:07.983Z,1528907707.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:08.369Z,1528907708.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:08.387Z,1528907708.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:08.757Z,1528907708.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:08.776Z,1528907708.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:09.155Z,1528907709.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:09.177Z,1528907709.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:09.558Z,1528907709.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:09.584Z,1528907709.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:09.953Z,1528907709.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:09.971Z,1528907709.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:10.365Z,1528907710.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:10.383Z,1528907710.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:10.765Z,1528907710.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:10.783Z,1528907710.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:11.163Z,1528907711.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:11.180Z,1528907711.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:11.556Z,1528907711.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:11.584Z,1528907711.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:11.957Z,1528907711.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:11.975Z,1528907711.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:12.354Z,1528907712.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:12.372Z,1528907712.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:12.755Z,1528907712.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:12.785Z,1528907712.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:13.154Z,1528907713.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:13.184Z,1528907713.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:13.572Z,1528907713.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:13.590Z,1528907713.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:13.971Z,1528907713.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:13.996Z,1528907713.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:14.371Z,1528907714.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:14.389Z,1528907714.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:14.747Z,1528907714.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:14.783Z,1528907714.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:15.151Z,1528907715.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:15.187Z,1528907715.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:15.552Z,1528907715.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:15.584Z,1528907715.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:15.951Z,1528907715.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:15.985Z,1528907715.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:16.368Z,1528907716.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:16.385Z,1528907716.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:16.771Z,1528907716.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:16.789Z,1528907716.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:17.161Z,1528907717.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:17.197Z,1528907717.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:17.551Z,1528907717.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:17.587Z,1528907717.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:17.951Z,1528907717.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:17.985Z,1528907717.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:18.351Z,1528907718.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:18.386Z,1528907718.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:18.751Z,1528907718.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:18.792Z,1528907718.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:19.155Z,1528907719.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:19.172Z,1528907719.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:19.565Z,1528907719.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:19.599Z,1528907719.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:19.965Z,1528907719.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:19.983Z,1528907719.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:20.362Z,1528907720.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:20.380Z,1528907720.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:20.757Z,1528907720.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:20.774Z,1528907720.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:21.157Z,1528907721.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:21.175Z,1528907721.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:21.557Z,1528907721.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:21.575Z,1528907721.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:21.957Z,1528907721.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:21.975Z,1528907721.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:22.362Z,1528907722.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:22.379Z,1528907722.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:22.765Z,1528907722.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:22.783Z,1528907722.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:23.162Z,1528907723.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:23.180Z,1528907723.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:23.556Z,1528907723.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:23.574Z,1528907723.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:23.957Z,1528907723.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:23.975Z,1528907723.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:24.358Z,1528907724.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:24.376Z,1528907724.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:24.751Z,1528907724.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:24.783Z,1528907724.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:25.154Z,1528907725.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:25.192Z,1528907725.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:25.564Z,1528907725.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:25.582Z,1528907725.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:25.973Z,1528907725.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:26.007Z,1528907726.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:26.363Z,1528907726.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:26.380Z,1528907726.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:26.758Z,1528907726.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:26.776Z,1528907726.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:27.155Z,1528907727.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:27.189Z,1528907727.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:27.555Z,1528907727.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:27.581Z,1528907727.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:27.956Z,1528907727.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:27.974Z,1528907727.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:28.367Z,1528907728.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:28.385Z,1528907728.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:28.770Z,1528907728.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:28.796Z,1528907728.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:29.172Z,1528907729.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:29.190Z,1528907729.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:29.555Z,1528907729.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:29.586Z,1528907729.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:29.951Z,1528907729.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:29.983Z,1528907729.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:30.348Z,1528907730.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:30.380Z,1528907730.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:30.752Z,1528907730.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:30.788Z,1528907730.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:31.155Z,1528907731.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:31.192Z,1528907731.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:31.574Z,1528907731.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:31.592Z,1528907731.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:31.976Z,1528907731.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:31.995Z,1528907731.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:32.373Z,1528907732.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:32.390Z,1528907732.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:32.752Z,1528907732.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:32.786Z,1528907732.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:33.155Z,1528907733.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:33.188Z,1528907733.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:33.552Z,1528907733.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:33.594Z,1528907733.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:33.955Z,1528907733.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:33.997Z,1528907733.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:34.365Z,1528907734.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:34.394Z,1528907734.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:34.769Z,1528907734.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:34.798Z,1528907734.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:35.165Z,1528907735.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:35.194Z,1528907735.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:35.555Z,1528907735.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:35.595Z,1528907735.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:35.599Z,1528907735.599 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T16:30:35.2Z
2018-06-13T16:35:35.599Z,1528907735.599 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T16:35:35.599Z,1528907735.599 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T16:35:35.955Z,1528907735.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:35.972Z,1528907735.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:39.846Z,1528907739.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:39.869Z,1528907739.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:40.002Z,1528907740.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:40.020Z,1528907740.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:40.375Z,1528907740.375 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0304.lzma
2018-06-13T16:35:40.417Z,1528907740.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:40.443Z,1528907740.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:40.814Z,1528907740.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:40.846Z,1528907740.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:41.174Z,1528907741.174 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0304.lzma.bak
2018-06-13T16:35:41.174Z,1528907741.174 [DataOverHttps](INFO): SBD MOMSN=8329548
2018-06-13T16:35:41.230Z,1528907741.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:41.248Z,1528907741.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:43.108Z,1528907743.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:43.149Z,1528907743.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:43.255Z,1528907743.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:43.309Z,1528907743.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:46.398Z,1528907746.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:46.416Z,1528907746.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:46.555Z,1528907746.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:46.595Z,1528907746.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:46.961Z,1528907746.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:46.995Z,1528907746.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:47.351Z,1528907747.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:47.376Z,1528907747.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:47.751Z,1528907747.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:47.768Z,1528907747.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:48.148Z,1528907748.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:48.178Z,1528907748.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:48.557Z,1528907748.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:48.575Z,1528907748.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:48.954Z,1528907748.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:48.972Z,1528907748.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:49.358Z,1528907749.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:49.380Z,1528907749.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:49.754Z,1528907749.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:49.771Z,1528907749.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:50.146Z,1528907750.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:50.165Z,1528907750.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:50.554Z,1528907750.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:50.571Z,1528907750.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:50.954Z,1528907750.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:50.972Z,1528907750.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:51.354Z,1528907751.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:51.372Z,1528907751.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:51.761Z,1528907751.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:51.784Z,1528907751.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:54.877Z,1528907754.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:54.905Z,1528907754.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:55.002Z,1528907755.002 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0305.lzma
2018-06-13T16:35:55.023Z,1528907755.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:55.081Z,1528907755.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:55.427Z,1528907755.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:55.464Z,1528907755.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:55.803Z,1528907755.803 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0305.lzma.bak
2018-06-13T16:35:55.803Z,1528907755.803 [DataOverHttps](INFO): SBD MOMSN=8329550
2018-06-13T16:35:55.832Z,1528907755.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:55.869Z,1528907755.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:57.802Z,1528907757.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:57.820Z,1528907757.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:57.823Z,1528907757.823 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T16:35:57.823Z,1528907757.823 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T16:35:57.823Z,1528907757.823 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T16:35:57.938Z,1528907757.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:57.976Z,1528907757.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:58.342Z,1528907758.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:58.370Z,1528907758.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:58.742Z,1528907758.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:58.780Z,1528907758.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:35:59.131Z,1528907759.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:35:59.149Z,1528907759.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:03.686Z,1528907763.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:03.704Z,1528907763.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:03.837Z,1528907763.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:03.888Z,1528907763.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:04.254Z,1528907764.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:04.283Z,1528907764.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:04.653Z,1528907764.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:04.686Z,1528907764.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:05.045Z,1528907765.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:05.084Z,1528907765.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:05.439Z,1528907765.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:05.473Z,1528907765.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:05.840Z,1528907765.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:05.857Z,1528907765.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:06.239Z,1528907766.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:06.257Z,1528907766.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:06.649Z,1528907766.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:06.667Z,1528907766.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:07.053Z,1528907767.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:07.071Z,1528907767.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:07.446Z,1528907767.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:07.463Z,1528907767.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:07.843Z,1528907767.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:07.860Z,1528907767.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:08.245Z,1528907768.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:08.263Z,1528907768.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:08.642Z,1528907768.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:08.660Z,1528907768.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:09.046Z,1528907769.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:09.063Z,1528907769.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:09.449Z,1528907769.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:09.467Z,1528907769.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:09.851Z,1528907769.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:09.868Z,1528907769.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:10.250Z,1528907770.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:10.272Z,1528907770.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:10.646Z,1528907770.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:10.663Z,1528907770.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:11.039Z,1528907771.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:11.063Z,1528907771.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:11.443Z,1528907771.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:11.474Z,1528907771.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:11.844Z,1528907771.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:11.861Z,1528907771.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:12.239Z,1528907772.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:12.263Z,1528907772.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:12.654Z,1528907772.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:12.672Z,1528907772.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:13.055Z,1528907773.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:13.072Z,1528907773.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:13.455Z,1528907773.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:13.473Z,1528907773.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:13.846Z,1528907773.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:13.868Z,1528907773.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:14.235Z,1528907774.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:14.263Z,1528907774.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:14.645Z,1528907774.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:14.671Z,1528907774.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:15.043Z,1528907775.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:15.066Z,1528907775.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:15.459Z,1528907775.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:15.483Z,1528907775.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:15.860Z,1528907775.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:15.877Z,1528907775.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:16.255Z,1528907776.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:16.280Z,1528907776.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:16.635Z,1528907776.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:16.664Z,1528907776.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:17.035Z,1528907777.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:17.071Z,1528907777.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:17.443Z,1528907777.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:17.466Z,1528907777.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:17.846Z,1528907777.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:17.864Z,1528907777.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:18.245Z,1528907778.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:18.268Z,1528907778.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:18.658Z,1528907778.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:18.676Z,1528907778.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:19.056Z,1528907779.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:19.073Z,1528907779.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:19.457Z,1528907779.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:19.475Z,1528907779.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:19.843Z,1528907779.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:19.866Z,1528907779.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:20.246Z,1528907780.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:20.264Z,1528907780.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:20.646Z,1528907780.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:20.669Z,1528907780.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:21.043Z,1528907781.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:21.066Z,1528907781.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:21.459Z,1528907781.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:21.477Z,1528907781.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:21.859Z,1528907781.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:21.876Z,1528907781.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:22.248Z,1528907782.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:22.274Z,1528907782.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:22.646Z,1528907782.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:22.670Z,1528907782.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:23.045Z,1528907783.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:23.063Z,1528907783.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:23.443Z,1528907783.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:23.477Z,1528907783.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:23.840Z,1528907783.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:23.867Z,1528907783.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:24.239Z,1528907784.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:24.275Z,1528907784.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:24.656Z,1528907784.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:24.674Z,1528907784.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:25.060Z,1528907785.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:25.084Z,1528907785.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:25.460Z,1528907785.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:25.477Z,1528907785.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:25.839Z,1528907785.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:25.875Z,1528907785.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:26.239Z,1528907786.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:26.268Z,1528907786.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:26.640Z,1528907786.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:26.667Z,1528907786.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:27.039Z,1528907787.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:27.066Z,1528907787.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:27.456Z,1528907787.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:27.479Z,1528907787.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:27.859Z,1528907787.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:27.876Z,1528907787.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:28.256Z,1528907788.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:28.274Z,1528907788.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:28.639Z,1528907788.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:28.667Z,1528907788.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:29.050Z,1528907789.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:29.068Z,1528907789.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:29.440Z,1528907789.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:29.474Z,1528907789.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:29.841Z,1528907789.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:29.870Z,1528907789.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:30.236Z,1528907790.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:30.270Z,1528907790.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:30.650Z,1528907790.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:30.683Z,1528907790.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:31.058Z,1528907791.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:31.082Z,1528907791.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:31.446Z,1528907791.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:31.479Z,1528907791.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:31.839Z,1528907791.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:31.876Z,1528907791.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:32.239Z,1528907792.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:32.282Z,1528907792.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:32.640Z,1528907792.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:32.658Z,1528907792.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:33.039Z,1528907793.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:33.075Z,1528907793.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:33.457Z,1528907793.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:33.491Z,1528907793.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:33.857Z,1528907793.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:33.890Z,1528907793.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:34.253Z,1528907794.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:34.292Z,1528907794.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:34.643Z,1528907794.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:34.668Z,1528907794.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:35.044Z,1528907795.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:35.062Z,1528907795.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:35.445Z,1528907795.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:35.463Z,1528907795.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:35.844Z,1528907795.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:35.862Z,1528907795.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:36.250Z,1528907796.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:36.268Z,1528907796.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:36.654Z,1528907796.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:36.672Z,1528907796.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:37.057Z,1528907797.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:37.080Z,1528907797.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:37.451Z,1528907797.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:37.469Z,1528907797.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:37.843Z,1528907797.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:37.867Z,1528907797.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:38.247Z,1528907798.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:38.265Z,1528907798.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:38.636Z,1528907798.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:38.666Z,1528907798.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:39.043Z,1528907799.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:39.077Z,1528907799.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:39.460Z,1528907799.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:39.478Z,1528907799.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:39.854Z,1528907799.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:39.884Z,1528907799.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:40.249Z,1528907800.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:40.273Z,1528907800.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:40.639Z,1528907800.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:40.669Z,1528907800.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:41.039Z,1528907801.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:41.066Z,1528907801.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:41.439Z,1528907801.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:41.473Z,1528907801.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:41.841Z,1528907801.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:41.876Z,1528907801.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:42.239Z,1528907802.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:42.278Z,1528907802.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:42.649Z,1528907802.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:42.676Z,1528907802.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:43.053Z,1528907803.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:43.082Z,1528907803.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:43.446Z,1528907803.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:43.479Z,1528907803.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:43.839Z,1528907803.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:43.873Z,1528907803.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:44.239Z,1528907804.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:44.258Z,1528907804.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:44.643Z,1528907804.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:44.660Z,1528907804.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:45.041Z,1528907805.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:45.059Z,1528907805.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:45.453Z,1528907805.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:45.487Z,1528907805.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:45.853Z,1528907805.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:45.887Z,1528907805.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:46.253Z,1528907806.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:46.286Z,1528907806.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:46.643Z,1528907806.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:46.662Z,1528907806.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:47.038Z,1528907807.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:47.056Z,1528907807.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:47.443Z,1528907807.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:47.460Z,1528907807.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:47.843Z,1528907807.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:47.861Z,1528907807.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:48.242Z,1528907808.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:48.260Z,1528907808.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:48.654Z,1528907808.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:48.688Z,1528907808.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:49.053Z,1528907809.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:49.070Z,1528907809.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:49.446Z,1528907809.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:49.464Z,1528907809.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:49.842Z,1528907809.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:49.864Z,1528907809.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:50.238Z,1528907810.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:50.264Z,1528907810.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:50.646Z,1528907810.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:50.664Z,1528907810.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:51.043Z,1528907811.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:51.073Z,1528907811.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:51.455Z,1528907811.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:51.473Z,1528907811.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:51.854Z,1528907811.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:51.876Z,1528907811.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:52.254Z,1528907812.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:52.276Z,1528907812.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:52.639Z,1528907812.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:52.665Z,1528907812.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:53.039Z,1528907813.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:53.062Z,1528907813.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:53.444Z,1528907813.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:53.483Z,1528907813.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:53.847Z,1528907813.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:53.865Z,1528907813.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:54.246Z,1528907814.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:54.268Z,1528907814.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:54.655Z,1528907814.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:54.680Z,1528907814.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:55.056Z,1528907815.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:55.074Z,1528907815.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:55.448Z,1528907815.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:55.478Z,1528907815.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:55.839Z,1528907815.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:55.872Z,1528907815.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:56.251Z,1528907816.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:56.269Z,1528907816.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:56.636Z,1528907816.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:56.671Z,1528907816.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:57.039Z,1528907817.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:57.075Z,1528907817.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:57.459Z,1528907817.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:57.476Z,1528907817.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:57.862Z,1528907817.862 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:57.884Z,1528907817.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:36:58.259Z,1528907818.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:36:58.277Z,1528907818.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:01.362Z,1528907821.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:01.379Z,1528907821.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:01.519Z,1528907821.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:01.559Z,1528907821.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:01.930Z,1528907821.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:01.963Z,1528907821.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:02.338Z,1528907822.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:02.372Z,1528907822.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:02.730Z,1528907822.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:02.763Z,1528907822.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:03.119Z,1528907823.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:03.136Z,1528907823.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:03.518Z,1528907823.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:03.537Z,1528907823.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:03.917Z,1528907823.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:03.935Z,1528907823.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:04.318Z,1528907824.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:04.336Z,1528907824.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:04.729Z,1528907824.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:04.747Z,1528907824.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:05.129Z,1528907825.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:05.147Z,1528907825.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:05.526Z,1528907825.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:05.544Z,1528907825.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:05.921Z,1528907825.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:05.944Z,1528907825.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:06.318Z,1528907826.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:06.336Z,1528907826.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:06.720Z,1528907826.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:06.738Z,1528907826.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:07.122Z,1528907827.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:07.140Z,1528907827.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:07.526Z,1528907827.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:07.548Z,1528907827.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:07.930Z,1528907827.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:07.947Z,1528907827.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:08.334Z,1528907828.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:08.372Z,1528907828.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:08.721Z,1528907828.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:08.739Z,1528907828.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:09.119Z,1528907829.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:09.153Z,1528907829.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:09.522Z,1528907829.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:09.540Z,1528907829.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:09.922Z,1528907829.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:09.940Z,1528907829.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:10.319Z,1528907830.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:10.341Z,1528907830.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:10.731Z,1528907830.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:10.749Z,1528907830.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:11.131Z,1528907831.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:11.148Z,1528907831.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:11.530Z,1528907831.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:11.552Z,1528907831.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:11.922Z,1528907831.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:11.940Z,1528907831.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:12.314Z,1528907832.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:12.346Z,1528907832.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:12.719Z,1528907832.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:12.742Z,1528907832.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:13.119Z,1528907833.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:13.154Z,1528907833.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:13.527Z,1528907833.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:13.552Z,1528907833.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:13.930Z,1528907833.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:13.952Z,1528907833.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:14.331Z,1528907834.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:14.349Z,1528907834.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:14.721Z,1528907834.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:14.739Z,1528907834.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:15.119Z,1528907835.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:15.150Z,1528907835.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:15.515Z,1528907835.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:15.550Z,1528907835.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:15.913Z,1528907835.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:15.948Z,1528907835.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:16.315Z,1528907836.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:16.345Z,1528907836.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:16.699Z,1528907836.699 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T16:37:16.699Z,1528907836.699 [NAL9602] Data Fault, FailCount= 2
2018-06-13T16:37:16.699Z,1528907836.699 [NAL9602](ERROR): Data Fault
2018-06-13T16:37:16.716Z,1528907836.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:16.755Z,1528907836.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:16.842Z,1528907836.842 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T16:37:17.094Z,1528907837.094 [NAL9602](INFO): Powering down
2018-06-13T16:37:17.112Z,1528907837.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:17.136Z,1528907837.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:17.519Z,1528907837.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:17.566Z,1528907837.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:17.919Z,1528907837.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:17.967Z,1528907837.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:18.053Z,1528907838.053 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T16:37:18.053Z,1528907838.053 [NAL9602] No Fault, FailCount= 2
2018-06-13T16:37:18.319Z,1528907838.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:18.337Z,1528907838.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:18.718Z,1528907838.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:18.736Z,1528907838.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:19.117Z,1528907839.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:19.135Z,1528907839.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:19.514Z,1528907839.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:19.533Z,1528907839.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:19.918Z,1528907839.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:19.937Z,1528907839.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:20.314Z,1528907840.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:20.336Z,1528907840.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:20.718Z,1528907840.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:20.736Z,1528907840.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:21.118Z,1528907841.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:21.136Z,1528907841.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:21.517Z,1528907841.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:21.535Z,1528907841.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:21.914Z,1528907841.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:21.932Z,1528907841.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:22.318Z,1528907842.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:22.336Z,1528907842.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:22.718Z,1528907842.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:22.736Z,1528907842.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:23.115Z,1528907843.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:23.133Z,1528907843.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:23.518Z,1528907843.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:23.536Z,1528907843.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:23.918Z,1528907843.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:23.935Z,1528907843.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:24.318Z,1528907844.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:24.336Z,1528907844.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:24.718Z,1528907844.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:24.737Z,1528907844.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:25.118Z,1528907845.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:25.135Z,1528907845.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:25.514Z,1528907845.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:25.532Z,1528907845.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:25.918Z,1528907845.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:25.936Z,1528907845.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:26.313Z,1528907846.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:26.331Z,1528907846.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:26.717Z,1528907846.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:26.736Z,1528907846.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:27.117Z,1528907847.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:27.136Z,1528907847.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:27.514Z,1528907847.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:27.531Z,1528907847.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:27.913Z,1528907847.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:27.931Z,1528907847.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:28.318Z,1528907848.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:28.336Z,1528907848.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:28.717Z,1528907848.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:28.734Z,1528907848.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:29.112Z,1528907849.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:29.130Z,1528907849.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:29.518Z,1528907849.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:29.536Z,1528907849.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:29.917Z,1528907849.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:29.934Z,1528907849.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:30.317Z,1528907850.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:30.335Z,1528907850.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:30.717Z,1528907850.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:30.735Z,1528907850.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:31.117Z,1528907851.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:31.134Z,1528907851.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:31.517Z,1528907851.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:31.535Z,1528907851.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:31.914Z,1528907851.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:31.940Z,1528907851.940 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:31.940Z,1528907851.940 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 263
2018-06-13T16:37:31.940Z,1528907851.940 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:37:31.946Z,1528907851.946 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:31.946Z,1528907851.946 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 263
2018-06-13T16:37:31.946Z,1528907851.946 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:37:31.948Z,1528907851.948 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:31.948Z,1528907851.948 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 263
2018-06-13T16:37:31.948Z,1528907851.948 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:37:32.031Z,1528907852.031 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:37:32.032Z,1528907852.032 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:37:32.032Z,1528907852.032 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:37:32.319Z,1528907852.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:32.413Z,1528907852.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:37:32.413Z,1528907852.413 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 263
2018-06-13T16:37:32.413Z,1528907852.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:37:32.414Z,1528907852.414 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 263
2018-06-13T16:37:32.414Z,1528907852.414 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:37:32.414Z,1528907852.414 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 263
2018-06-13T16:37:32.716Z,1528907852.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:32.733Z,1528907852.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:37:32.734Z,1528907852.734 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:37:32.734Z,1528907852.734 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:37:32.734Z,1528907852.734 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:37:32.735Z,1528907852.735 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:37:32.735Z,1528907852.735 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:37:32.735Z,1528907852.735 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:37:32.736Z,1528907852.736 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:37:32.736Z,1528907852.736 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:37:33.118Z,1528907853.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:33.147Z,1528907853.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:37:33.148Z,1528907853.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:33.520Z,1528907853.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:33.537Z,1528907853.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:37:33.538Z,1528907853.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:33.916Z,1528907853.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:33.933Z,1528907853.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:37:33.934Z,1528907853.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:34.321Z,1528907854.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:34.339Z,1528907854.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:37:34.339Z,1528907854.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:34.720Z,1528907854.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:34.737Z,1528907854.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:37:34.738Z,1528907854.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:35.116Z,1528907855.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:35.134Z,1528907855.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:37:35.135Z,1528907855.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:35.519Z,1528907855.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:35.540Z,1528907855.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:37:35.541Z,1528907855.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:35.920Z,1528907855.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:35.937Z,1528907855.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:37:35.938Z,1528907855.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:36.320Z,1528907856.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:36.338Z,1528907856.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:37:36.339Z,1528907856.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:36.718Z,1528907856.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:36.756Z,1528907856.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:37:36.756Z,1528907856.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:37.118Z,1528907857.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:37.142Z,1528907857.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:37:37.143Z,1528907857.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:37.520Z,1528907857.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:37.538Z,1528907857.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:37:37.539Z,1528907857.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:37.918Z,1528907857.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:37.941Z,1528907857.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:37:37.942Z,1528907857.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:38.311Z,1528907858.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:38.352Z,1528907858.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:37:38.353Z,1528907858.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:38.714Z,1528907858.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:38.752Z,1528907858.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:37:38.753Z,1528907858.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:39.115Z,1528907859.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:39.148Z,1528907859.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:37:39.148Z,1528907859.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:39.513Z,1528907859.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:39.547Z,1528907859.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:37:39.548Z,1528907859.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:39.910Z,1528907859.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:39.940Z,1528907859.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:37:39.945Z,1528907859.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:40.314Z,1528907860.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:40.351Z,1528907860.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:37:40.352Z,1528907860.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:40.714Z,1528907860.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:40.754Z,1528907860.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:37:40.755Z,1528907860.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:41.114Z,1528907861.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:41.149Z,1528907861.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:37:41.150Z,1528907861.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:41.518Z,1528907861.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:41.555Z,1528907861.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:37:41.556Z,1528907861.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:41.914Z,1528907861.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:41.931Z,1528907861.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:37:41.932Z,1528907861.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:42.314Z,1528907862.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:42.332Z,1528907862.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:37:42.349Z,1528907862.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:42.714Z,1528907862.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:42.736Z,1528907862.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:37:42.757Z,1528907862.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:43.118Z,1528907863.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:43.140Z,1528907863.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:37:43.168Z,1528907863.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:43.511Z,1528907863.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:43.529Z,1528907863.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:37:43.530Z,1528907863.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:43.918Z,1528907863.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:43.940Z,1528907863.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:37:43.961Z,1528907863.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:44.317Z,1528907864.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:44.334Z,1528907864.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:37:44.335Z,1528907864.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:44.717Z,1528907864.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:44.735Z,1528907864.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:37:44.736Z,1528907864.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:45.118Z,1528907865.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:45.135Z,1528907865.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:37:45.136Z,1528907865.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:45.514Z,1528907865.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:45.531Z,1528907865.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:37:45.532Z,1528907865.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:45.914Z,1528907865.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:45.931Z,1528907865.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:37:45.932Z,1528907865.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:46.318Z,1528907866.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:46.335Z,1528907866.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:37:46.336Z,1528907866.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:46.718Z,1528907866.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:46.735Z,1528907866.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:37:46.736Z,1528907866.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:47.097Z,1528907867.097 [NAL9602](INFO): Powering up NAL9602
2018-06-13T16:37:47.113Z,1528907867.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:47.131Z,1528907867.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:37:47.132Z,1528907867.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:47.518Z,1528907867.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:47.535Z,1528907867.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:37:47.536Z,1528907867.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:47.918Z,1528907867.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:47.936Z,1528907867.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:37:47.937Z,1528907867.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:48.317Z,1528907868.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:48.334Z,1528907868.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:37:48.335Z,1528907868.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:48.722Z,1528907868.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:48.740Z,1528907868.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:37:48.741Z,1528907868.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:49.120Z,1528907869.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:49.138Z,1528907869.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:37:49.139Z,1528907869.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:49.515Z,1528907869.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:49.532Z,1528907869.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:37:49.533Z,1528907869.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:49.920Z,1528907869.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:49.938Z,1528907869.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:37:49.938Z,1528907869.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:50.320Z,1528907870.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:50.338Z,1528907870.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:37:50.339Z,1528907870.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:50.717Z,1528907870.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:50.734Z,1528907870.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:37:50.735Z,1528907870.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:51.120Z,1528907871.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:51.138Z,1528907871.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:37:51.138Z,1528907871.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:51.520Z,1528907871.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:51.538Z,1528907871.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T16:37:51.539Z,1528907871.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:51.916Z,1528907871.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:51.934Z,1528907871.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T16:37:51.935Z,1528907871.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:52.320Z,1528907872.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:52.338Z,1528907872.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:52.720Z,1528907872.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:52.739Z,1528907872.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:53.116Z,1528907873.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:53.134Z,1528907873.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:53.514Z,1528907873.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:53.544Z,1528907873.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:53.920Z,1528907873.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:53.938Z,1528907873.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:54.320Z,1528907874.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:54.338Z,1528907874.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:54.720Z,1528907874.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:54.738Z,1528907874.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:55.120Z,1528907875.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:55.138Z,1528907875.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:55.522Z,1528907875.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:55.540Z,1528907875.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:55.920Z,1528907875.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:55.938Z,1528907875.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:56.321Z,1528907876.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:56.339Z,1528907876.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:56.720Z,1528907876.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:56.739Z,1528907876.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:57.121Z,1528907877.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:57.139Z,1528907877.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:57.531Z,1528907877.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:57.565Z,1528907877.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:57.905Z,1528907877.905 [NAL9602](INFO): NAL9602 initialized
2018-06-13T16:37:57.921Z,1528907877.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:57.940Z,1528907877.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:37:58.327Z,1528907878.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:37:58.348Z,1528907878.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:01.450Z,1528907881.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:01.484Z,1528907881.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:01.620Z,1528907881.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:01.673Z,1528907881.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:02.017Z,1528907882.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:02.034Z,1528907882.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:02.392Z,1528907882.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:02.430Z,1528907882.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:02.787Z,1528907882.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:02.805Z,1528907882.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:03.192Z,1528907883.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:03.210Z,1528907883.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:03.591Z,1528907883.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:03.609Z,1528907883.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:04.002Z,1528907884.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:04.032Z,1528907884.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:04.406Z,1528907884.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:04.444Z,1528907884.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:04.806Z,1528907884.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:04.824Z,1528907884.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:05.195Z,1528907885.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:05.214Z,1528907885.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:05.599Z,1528907885.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:05.617Z,1528907885.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:05.997Z,1528907885.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:06.015Z,1528907886.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:06.393Z,1528907886.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:06.411Z,1528907886.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:06.805Z,1528907886.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:06.824Z,1528907886.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:07.206Z,1528907887.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:07.227Z,1528907887.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:07.602Z,1528907887.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:07.621Z,1528907887.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:07.999Z,1528907887.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:08.017Z,1528907888.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:08.398Z,1528907888.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:08.415Z,1528907888.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:08.802Z,1528907888.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:08.820Z,1528907888.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:09.209Z,1528907889.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:09.227Z,1528907889.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:09.602Z,1528907889.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:09.620Z,1528907889.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:09.998Z,1528907889.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:10.016Z,1528907890.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:10.396Z,1528907890.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:10.430Z,1528907890.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:10.807Z,1528907890.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:10.825Z,1528907890.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:11.207Z,1528907891.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:11.224Z,1528907891.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:11.606Z,1528907891.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:11.636Z,1528907891.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:11.987Z,1528907891.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:12.024Z,1528907892.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:12.396Z,1528907892.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:12.416Z,1528907892.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:12.808Z,1528907892.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:12.827Z,1528907892.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:13.208Z,1528907893.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:13.229Z,1528907893.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:13.607Z,1528907893.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:13.626Z,1528907893.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:13.998Z,1528907893.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:14.016Z,1528907894.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:14.387Z,1528907894.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:14.426Z,1528907894.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:14.807Z,1528907894.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:14.825Z,1528907894.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:15.212Z,1528907895.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:15.230Z,1528907895.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:15.603Z,1528907895.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:15.621Z,1528907895.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:15.987Z,1528907895.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:16.017Z,1528907896.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:16.391Z,1528907896.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:16.424Z,1528907896.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:16.801Z,1528907896.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:16.830Z,1528907896.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:17.206Z,1528907897.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:17.240Z,1528907897.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:17.605Z,1528907897.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:17.642Z,1528907897.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:17.988Z,1528907897.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:18.028Z,1528907898.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:18.391Z,1528907898.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:18.408Z,1528907898.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:18.805Z,1528907898.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:18.840Z,1528907898.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:19.212Z,1528907899.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:19.241Z,1528907899.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:19.604Z,1528907899.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:19.638Z,1528907899.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:19.996Z,1528907899.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:20.013Z,1528907900.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:20.394Z,1528907900.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:20.412Z,1528907900.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:20.805Z,1528907900.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:20.839Z,1528907900.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:21.205Z,1528907901.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:21.243Z,1528907901.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:21.601Z,1528907901.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:21.619Z,1528907901.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:21.995Z,1528907901.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:22.013Z,1528907902.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:22.394Z,1528907902.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:22.412Z,1528907902.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:22.801Z,1528907902.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:22.819Z,1528907902.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:23.205Z,1528907903.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:23.223Z,1528907903.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:23.605Z,1528907903.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:23.623Z,1528907903.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:23.996Z,1528907903.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:24.015Z,1528907904.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:24.395Z,1528907904.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:24.413Z,1528907904.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:24.805Z,1528907904.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:24.823Z,1528907904.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:25.205Z,1528907905.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:25.223Z,1528907905.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:25.602Z,1528907905.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:25.620Z,1528907905.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:25.998Z,1528907905.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:26.021Z,1528907906.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:26.391Z,1528907906.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:26.415Z,1528907906.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:26.805Z,1528907906.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:26.823Z,1528907906.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:27.205Z,1528907907.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:27.223Z,1528907907.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:27.601Z,1528907907.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:27.619Z,1528907907.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:27.997Z,1528907907.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:28.015Z,1528907908.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:28.395Z,1528907908.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:28.426Z,1528907908.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:28.803Z,1528907908.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:28.828Z,1528907908.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:29.205Z,1528907909.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:29.223Z,1528907909.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:29.605Z,1528907909.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:29.628Z,1528907909.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:29.993Z,1528907909.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:30.011Z,1528907910.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:30.396Z,1528907910.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:30.414Z,1528907910.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:30.806Z,1528907910.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:30.824Z,1528907910.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:31.206Z,1528907911.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:31.223Z,1528907911.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:31.607Z,1528907911.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:31.625Z,1528907911.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:31.998Z,1528907911.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:32.016Z,1528907912.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:32.391Z,1528907912.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:32.415Z,1528907912.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:32.803Z,1528907912.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:32.822Z,1528907912.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:33.206Z,1528907913.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:33.224Z,1528907913.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:33.606Z,1528907913.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:33.624Z,1528907913.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:33.997Z,1528907913.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:34.015Z,1528907914.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:34.390Z,1528907914.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:34.423Z,1528907914.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:34.806Z,1528907914.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:34.824Z,1528907914.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:35.204Z,1528907915.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:35.236Z,1528907915.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:35.613Z,1528907915.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:35.630Z,1528907915.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:35.991Z,1528907915.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:36.028Z,1528907916.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:36.391Z,1528907916.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:36.424Z,1528907916.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:36.812Z,1528907916.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:36.836Z,1528907916.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:37.207Z,1528907917.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:37.225Z,1528907917.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:37.607Z,1528907917.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:37.626Z,1528907917.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:37.992Z,1528907917.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:38.024Z,1528907918.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:38.387Z,1528907918.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:38.422Z,1528907918.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:38.807Z,1528907918.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:38.825Z,1528907918.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:39.212Z,1528907919.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:39.230Z,1528907919.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:39.604Z,1528907919.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:39.622Z,1528907919.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:39.991Z,1528907919.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:40.018Z,1528907920.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:40.392Z,1528907920.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:40.432Z,1528907920.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:40.787Z,1528907920.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:40.824Z,1528907920.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:41.209Z,1528907921.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:41.227Z,1528907921.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:41.612Z,1528907921.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:41.630Z,1528907921.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:42.004Z,1528907922.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:42.022Z,1528907922.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:42.391Z,1528907922.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:42.419Z,1528907922.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:42.791Z,1528907922.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:42.819Z,1528907922.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:43.193Z,1528907923.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:43.222Z,1528907923.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:43.591Z,1528907923.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:43.624Z,1528907923.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:44.013Z,1528907924.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:44.031Z,1528907924.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:44.407Z,1528907924.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:44.424Z,1528907924.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:44.808Z,1528907924.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:44.826Z,1528907924.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:45.191Z,1528907925.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:45.228Z,1528907925.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:45.587Z,1528907925.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:45.620Z,1528907925.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:45.991Z,1528907925.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:46.028Z,1528907926.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:46.392Z,1528907926.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:46.432Z,1528907926.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:46.787Z,1528907926.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:46.833Z,1528907926.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:47.201Z,1528907927.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:47.236Z,1528907927.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:47.605Z,1528907927.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:47.633Z,1528907927.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:48.005Z,1528907928.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:48.035Z,1528907928.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:48.392Z,1528907928.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:48.410Z,1528907928.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:48.796Z,1528907928.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:48.836Z,1528907928.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:49.195Z,1528907929.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:49.213Z,1528907929.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:49.592Z,1528907929.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:49.610Z,1528907929.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:50.006Z,1528907930.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:50.043Z,1528907930.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:50.406Z,1528907930.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:50.447Z,1528907930.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:50.799Z,1528907930.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:50.817Z,1528907930.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:51.197Z,1528907931.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:51.220Z,1528907931.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:51.596Z,1528907931.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:51.614Z,1528907931.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:51.993Z,1528907931.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:52.012Z,1528907932.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:52.396Z,1528907932.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:52.429Z,1528907932.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:52.791Z,1528907932.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:52.815Z,1528907932.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:53.202Z,1528907933.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:53.220Z,1528907933.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:53.605Z,1528907933.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:53.623Z,1528907933.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:54.002Z,1528907934.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:54.025Z,1528907934.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:54.392Z,1528907934.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:54.410Z,1528907934.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:54.796Z,1528907934.796 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:54.822Z,1528907934.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:55.191Z,1528907935.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:55.216Z,1528907935.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:55.592Z,1528907935.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:55.610Z,1528907935.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:56.006Z,1528907936.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:56.024Z,1528907936.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:56.406Z,1528907936.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:56.428Z,1528907936.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:56.804Z,1528907936.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:56.822Z,1528907936.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:57.198Z,1528907937.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:57.215Z,1528907937.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:57.597Z,1528907937.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:57.615Z,1528907937.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:57.997Z,1528907937.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:58.015Z,1528907938.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:38:58.403Z,1528907938.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:38:58.421Z,1528907938.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:01.624Z,1528907941.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:01.652Z,1528907941.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:01.799Z,1528907941.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:01.816Z,1528907941.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:02.198Z,1528907942.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:02.215Z,1528907942.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:02.605Z,1528907942.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:02.623Z,1528907942.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:02.967Z,1528907942.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:03.015Z,1528907943.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:03.378Z,1528907943.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:03.407Z,1528907943.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:03.772Z,1528907943.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:03.810Z,1528907943.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:04.192Z,1528907944.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:04.212Z,1528907944.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:04.593Z,1528907944.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:04.621Z,1528907944.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:04.984Z,1528907944.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:05.024Z,1528907945.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:05.376Z,1528907945.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:05.402Z,1528907945.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:05.775Z,1528907945.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:05.813Z,1528907945.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:06.172Z,1528907946.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:06.220Z,1528907946.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:06.572Z,1528907946.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:06.614Z,1528907946.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:06.987Z,1528907946.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:07.016Z,1528907947.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:07.383Z,1528907947.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:07.417Z,1528907947.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:07.782Z,1528907947.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:07.813Z,1528907947.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:08.174Z,1528907948.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:08.213Z,1528907948.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:08.577Z,1528907948.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:08.596Z,1528907948.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:08.977Z,1528907948.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:08.995Z,1528907948.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:09.374Z,1528907949.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:09.423Z,1528907949.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:09.774Z,1528907949.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:09.796Z,1528907949.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:10.188Z,1528907950.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:10.223Z,1528907950.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:10.585Z,1528907950.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:10.604Z,1528907950.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:10.982Z,1528907950.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:11.027Z,1528907951.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:11.375Z,1528907951.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:11.428Z,1528907951.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:11.779Z,1528907951.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:11.824Z,1528907951.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:12.181Z,1528907952.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:12.200Z,1528907952.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:12.575Z,1528907952.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:12.624Z,1528907952.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:12.987Z,1528907952.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:13.008Z,1528907953.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:13.388Z,1528907953.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:13.406Z,1528907953.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:13.786Z,1528907953.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:13.804Z,1528907953.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:14.178Z,1528907954.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:14.227Z,1528907954.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:14.577Z,1528907954.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:14.600Z,1528907954.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:14.980Z,1528907954.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:15.001Z,1528907955.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:15.381Z,1528907955.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:15.399Z,1528907955.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:15.780Z,1528907955.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:15.831Z,1528907955.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:16.182Z,1528907956.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:16.205Z,1528907956.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:16.588Z,1528907956.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:16.607Z,1528907956.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:16.985Z,1528907956.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:17.004Z,1528907957.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:17.373Z,1528907957.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:17.429Z,1528907957.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:17.778Z,1528907957.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:17.802Z,1528907957.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:18.178Z,1528907958.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:18.200Z,1528907958.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:18.578Z,1528907958.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:18.598Z,1528907958.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:18.985Z,1528907958.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:19.028Z,1528907959.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:19.385Z,1528907959.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:19.409Z,1528907959.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:19.782Z,1528907959.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:19.805Z,1528907959.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:20.176Z,1528907960.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:20.212Z,1528907960.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:20.575Z,1528907960.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:20.631Z,1528907960.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:20.977Z,1528907960.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:20.996Z,1528907960.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:21.375Z,1528907961.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:21.405Z,1528907961.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:21.768Z,1528907961.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:21.801Z,1528907961.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:22.187Z,1528907962.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:22.230Z,1528907962.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:22.588Z,1528907962.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:22.612Z,1528907962.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:22.987Z,1528907962.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:23.011Z,1528907963.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:23.377Z,1528907963.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:23.400Z,1528907963.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:23.775Z,1528907963.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:23.831Z,1528907963.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:24.175Z,1528907964.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:24.214Z,1528907964.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:24.571Z,1528907964.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:24.611Z,1528907964.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:24.996Z,1528907964.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:25.015Z,1528907965.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:25.391Z,1528907965.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:25.442Z,1528907965.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:25.787Z,1528907965.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:25.811Z,1528907965.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:26.171Z,1528907966.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:26.210Z,1528907966.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:26.572Z,1528907966.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:26.619Z,1528907966.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:26.971Z,1528907966.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:27.005Z,1528907967.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:27.372Z,1528907967.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:27.402Z,1528907967.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:27.771Z,1528907967.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:27.809Z,1528907967.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:28.181Z,1528907968.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:28.223Z,1528907968.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:28.586Z,1528907968.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:28.615Z,1528907968.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:28.977Z,1528907968.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:29.017Z,1528907969.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:29.371Z,1528907969.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:29.388Z,1528907969.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:29.774Z,1528907969.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:29.796Z,1528907969.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:30.173Z,1528907970.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:30.199Z,1528907970.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:30.575Z,1528907970.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:30.594Z,1528907970.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:30.985Z,1528907970.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:31.008Z,1528907971.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:31.385Z,1528907971.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:31.429Z,1528907971.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:31.782Z,1528907971.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:31.800Z,1528907971.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:32.178Z,1528907972.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:32.195Z,1528907972.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:32.575Z,1528907972.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:32.623Z,1528907972.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:32.976Z,1528907972.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:32.996Z,1528907972.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:33.376Z,1528907973.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:33.399Z,1528907973.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:33.777Z,1528907973.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:33.795Z,1528907973.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:34.186Z,1528907974.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:34.205Z,1528907974.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:34.586Z,1528907974.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:34.610Z,1528907974.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:34.986Z,1528907974.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:35.004Z,1528907975.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:35.373Z,1528907975.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:35.392Z,1528907975.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:35.775Z,1528907975.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:35.806Z,1528907975.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:36.178Z,1528907976.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:36.212Z,1528907976.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:36.571Z,1528907976.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:36.599Z,1528907976.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:36.991Z,1528907976.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:37.016Z,1528907977.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:37.392Z,1528907977.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:37.421Z,1528907977.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:37.784Z,1528907977.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:37.806Z,1528907977.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:38.175Z,1528907978.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:38.205Z,1528907978.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:38.571Z,1528907978.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:38.600Z,1528907978.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:38.971Z,1528907978.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:39.002Z,1528907979.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:39.372Z,1528907979.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:39.402Z,1528907979.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:39.771Z,1528907979.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:39.809Z,1528907979.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:40.182Z,1528907980.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:40.211Z,1528907980.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:40.586Z,1528907980.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:40.616Z,1528907980.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:40.982Z,1528907980.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:41.017Z,1528907981.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:41.371Z,1528907981.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:41.405Z,1528907981.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:41.771Z,1528907981.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:41.790Z,1528907981.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:42.176Z,1528907982.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:42.195Z,1528907982.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:42.574Z,1528907982.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:42.592Z,1528907982.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:42.985Z,1528907982.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:43.020Z,1528907983.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:43.385Z,1528907983.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:43.404Z,1528907983.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:43.781Z,1528907983.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:43.799Z,1528907983.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:44.178Z,1528907984.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:44.195Z,1528907984.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:44.580Z,1528907984.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:44.598Z,1528907984.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:44.975Z,1528907984.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:44.993Z,1528907984.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:45.376Z,1528907985.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:45.411Z,1528907985.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:45.778Z,1528907985.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:45.796Z,1528907985.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:46.180Z,1528907986.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:46.214Z,1528907986.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:46.592Z,1528907986.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:46.611Z,1528907986.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:46.993Z,1528907986.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:47.016Z,1528907987.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:47.367Z,1528907987.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:47.402Z,1528907987.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:47.771Z,1528907987.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:47.811Z,1528907987.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:48.171Z,1528907988.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:48.210Z,1528907988.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:48.571Z,1528907988.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:48.609Z,1528907988.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:48.993Z,1528907988.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:49.013Z,1528907989.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:49.392Z,1528907989.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:49.413Z,1528907989.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:49.792Z,1528907989.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:49.812Z,1528907989.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:50.171Z,1528907990.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:50.208Z,1528907990.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:50.571Z,1528907990.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:50.609Z,1528907990.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:50.971Z,1528907990.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:50.988Z,1528907990.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:51.376Z,1528907991.376 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:51.393Z,1528907991.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:51.775Z,1528907991.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:51.793Z,1528907991.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:52.185Z,1528907992.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:52.204Z,1528907992.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:52.585Z,1528907992.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:52.603Z,1528907992.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:52.982Z,1528907992.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:52.000Z,1528907993.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:53.377Z,1528907993.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:53.394Z,1528907993.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:53.778Z,1528907993.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:53.796Z,1528907993.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:54.178Z,1528907994.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:54.195Z,1528907994.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:54.577Z,1528907994.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:54.595Z,1528907994.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:54.985Z,1528907994.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:55.004Z,1528907995.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:55.385Z,1528907995.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:55.404Z,1528907995.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:55.782Z,1528907995.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:55.800Z,1528907995.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:56.178Z,1528907996.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:56.195Z,1528907996.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:56.575Z,1528907996.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:56.608Z,1528907996.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:56.973Z,1528907996.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:56.990Z,1528907996.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:57.378Z,1528907997.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:57.396Z,1528907997.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:57.777Z,1528907997.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:57.795Z,1528907997.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:58.186Z,1528907998.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:58.205Z,1528907998.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:58.590Z,1528907998.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:58.608Z,1528907998.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:58.986Z,1528907998.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:59.005Z,1528907999.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:59.377Z,1528907999.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:59.395Z,1528907999.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:39:59.782Z,1528907999.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:39:59.804Z,1528907999.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:00.178Z,1528908000.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:00.195Z,1528908000.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:00.577Z,1528908000.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:00.596Z,1528908000.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:00.990Z,1528908000.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:01.008Z,1528908001.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:01.390Z,1528908001.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:01.409Z,1528908001.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:01.787Z,1528908001.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:01.806Z,1528908001.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:02.182Z,1528908002.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:02.200Z,1528908002.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:05.287Z,1528908005.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:05.305Z,1528908005.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:05.440Z,1528908005.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:05.488Z,1528908005.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:05.836Z,1528908005.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:05.860Z,1528908005.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:06.236Z,1528908006.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:06.265Z,1528908006.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:06.611Z,1528908006.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:06.650Z,1528908006.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:07.016Z,1528908007.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:07.060Z,1528908007.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:07.417Z,1528908007.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:07.446Z,1528908007.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:07.815Z,1528908007.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:07.848Z,1528908007.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:08.237Z,1528908008.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:08.262Z,1528908008.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:08.634Z,1528908008.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:08.652Z,1528908008.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:09.021Z,1528908009.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:09.056Z,1528908009.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:09.415Z,1528908009.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:09.456Z,1528908009.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:09.815Z,1528908009.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:09.846Z,1528908009.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:10.212Z,1528908010.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:10.230Z,1528908010.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:10.614Z,1528908010.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:10.632Z,1528908010.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:11.029Z,1528908011.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:11.068Z,1528908011.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:11.429Z,1528908011.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:11.471Z,1528908011.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:11.829Z,1528908011.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:11.867Z,1528908011.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:12.219Z,1528908012.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:12.237Z,1528908012.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:12.616Z,1528908012.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:12.634Z,1528908012.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:13.014Z,1528908013.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:13.039Z,1528908013.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:13.420Z,1528908013.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:13.451Z,1528908013.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:13.811Z,1528908013.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:13.849Z,1528908013.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:14.236Z,1528908014.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:14.254Z,1528908014.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:14.635Z,1528908014.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:14.653Z,1528908014.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:15.027Z,1528908015.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:15.045Z,1528908015.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:15.414Z,1528908015.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:15.452Z,1528908015.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:15.816Z,1528908015.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:15.854Z,1528908015.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:16.212Z,1528908016.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:16.247Z,1528908016.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:16.612Z,1528908016.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:16.656Z,1528908016.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:17.029Z,1528908017.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:17.058Z,1528908017.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:17.429Z,1528908017.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:17.456Z,1528908017.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:17.830Z,1528908017.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:17.858Z,1528908017.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:18.216Z,1528908018.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:18.234Z,1528908018.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:18.615Z,1528908018.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:18.633Z,1528908018.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:19.016Z,1528908019.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:19.034Z,1528908019.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:19.420Z,1528908019.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:19.444Z,1528908019.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:19.816Z,1528908019.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:19.834Z,1528908019.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:20.233Z,1528908020.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:20.267Z,1528908020.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:20.629Z,1528908020.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:20.647Z,1528908020.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:21.030Z,1528908021.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:21.052Z,1528908021.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:21.422Z,1528908021.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:21.443Z,1528908021.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:21.823Z,1528908021.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:21.841Z,1528908021.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:22.219Z,1528908022.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:22.237Z,1528908022.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:22.619Z,1528908022.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:22.652Z,1528908022.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:23.031Z,1528908023.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:23.051Z,1528908023.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:23.431Z,1528908023.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:23.456Z,1528908023.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:23.832Z,1528908023.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:23.850Z,1528908023.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:24.222Z,1528908024.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:24.248Z,1528908024.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:24.611Z,1528908024.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:24.646Z,1528908024.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:25.014Z,1528908025.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:25.043Z,1528908025.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:25.416Z,1528908025.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:25.447Z,1528908025.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:25.811Z,1528908025.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:25.848Z,1528908025.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:26.237Z,1528908026.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:26.256Z,1528908026.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:26.636Z,1528908026.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:26.655Z,1528908026.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:27.029Z,1528908027.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:27.047Z,1528908027.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:27.416Z,1528908027.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:27.445Z,1528908027.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:27.816Z,1528908027.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:27.854Z,1528908027.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:28.216Z,1528908028.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:28.252Z,1528908028.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:28.616Z,1528908028.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:28.659Z,1528908028.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:29.036Z,1528908029.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:29.055Z,1528908029.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:29.435Z,1528908029.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:29.454Z,1528908029.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:29.838Z,1528908029.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:29.856Z,1528908029.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:30.212Z,1528908030.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:30.242Z,1528908030.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:30.611Z,1528908030.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:30.638Z,1528908030.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:31.034Z,1528908031.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:31.060Z,1528908031.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:31.436Z,1528908031.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:31.454Z,1528908031.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:31.837Z,1528908031.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:31.855Z,1528908031.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:32.216Z,1528908032.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:32.246Z,1528908032.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:32.615Z,1528908032.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:32.651Z,1528908032.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:33.029Z,1528908033.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:33.058Z,1528908033.058 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:33.058Z,1528908033.058 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 264
2018-06-13T16:40:33.058Z,1528908033.058 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:40:33.060Z,1528908033.060 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:33.060Z,1528908033.060 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 264
2018-06-13T16:40:33.060Z,1528908033.060 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:40:33.062Z,1528908033.062 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:33.062Z,1528908033.062 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 264
2018-06-13T16:40:33.062Z,1528908033.062 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:40:33.138Z,1528908033.138 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:40:33.138Z,1528908033.138 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:40:33.139Z,1528908033.139 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:40:33.437Z,1528908033.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:33.541Z,1528908033.541 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:40:33.541Z,1528908033.541 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 264
2018-06-13T16:40:33.542Z,1528908033.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:40:33.542Z,1528908033.542 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 264
2018-06-13T16:40:33.542Z,1528908033.542 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:40:33.542Z,1528908033.542 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 264
2018-06-13T16:40:33.825Z,1528908033.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:33.842Z,1528908033.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:40:33.843Z,1528908033.843 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:40:33.843Z,1528908033.843 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:40:33.843Z,1528908033.843 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:40:33.844Z,1528908033.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:40:33.844Z,1528908033.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:40:33.844Z,1528908033.844 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:40:33.865Z,1528908033.865 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:40:33.865Z,1528908033.865 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:40:34.218Z,1528908034.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:34.235Z,1528908034.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:40:34.236Z,1528908034.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:34.621Z,1528908034.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:34.639Z,1528908034.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:40:34.640Z,1528908034.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:35.021Z,1528908035.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:35.039Z,1528908035.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:40:35.040Z,1528908035.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:35.429Z,1528908035.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:35.446Z,1528908035.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:40:35.447Z,1528908035.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:35.829Z,1528908035.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:35.847Z,1528908035.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:40:35.848Z,1528908035.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:36.216Z,1528908036.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:36.250Z,1528908036.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:40:36.251Z,1528908036.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:36.621Z,1528908036.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:36.639Z,1528908036.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:40:36.640Z,1528908036.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:37.035Z,1528908037.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:37.052Z,1528908037.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:40:37.053Z,1528908037.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:37.432Z,1528908037.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:37.450Z,1528908037.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:40:37.451Z,1528908037.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:37.836Z,1528908037.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:37.853Z,1528908037.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:40:37.854Z,1528908037.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:38.216Z,1528908038.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:38.242Z,1528908038.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:40:38.243Z,1528908038.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:38.611Z,1528908038.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:38.648Z,1528908038.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:40:38.648Z,1528908038.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:39.028Z,1528908039.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:39.046Z,1528908039.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:40:39.047Z,1528908039.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:39.436Z,1528908039.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:39.456Z,1528908039.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:40:39.457Z,1528908039.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:39.828Z,1528908039.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:39.845Z,1528908039.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:40:39.846Z,1528908039.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:40.212Z,1528908040.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:40.247Z,1528908040.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:40:40.248Z,1528908040.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:40.624Z,1528908040.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:40.659Z,1528908040.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:40:40.660Z,1528908040.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:41.022Z,1528908041.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:41.048Z,1528908041.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:40:41.053Z,1528908041.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:41.425Z,1528908041.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:41.447Z,1528908041.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:40:41.447Z,1528908041.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:41.834Z,1528908041.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:41.859Z,1528908041.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:40:41.860Z,1528908041.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:42.213Z,1528908042.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:42.231Z,1528908042.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:40:42.232Z,1528908042.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:42.611Z,1528908042.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:42.633Z,1528908042.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:40:42.634Z,1528908042.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:43.042Z,1528908043.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:43.072Z,1528908043.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:40:43.077Z,1528908043.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:43.432Z,1528908043.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:43.450Z,1528908043.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:40:43.451Z,1528908043.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:43.832Z,1528908043.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:43.858Z,1528908043.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:40:43.859Z,1528908043.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:44.217Z,1528908044.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:44.256Z,1528908044.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:40:44.261Z,1528908044.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:44.611Z,1528908044.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:44.637Z,1528908044.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:40:44.638Z,1528908044.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:45.029Z,1528908045.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:45.064Z,1528908045.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:40:45.065Z,1528908045.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:45.429Z,1528908045.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:45.465Z,1528908045.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:40:45.466Z,1528908045.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:45.825Z,1528908045.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:45.853Z,1528908045.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:40:45.854Z,1528908045.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:46.214Z,1528908046.214 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:46.357Z,1528908046.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T16:40:46.358Z,1528908046.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:46.616Z,1528908046.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:46.656Z,1528908046.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:40:46.657Z,1528908046.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:47.022Z,1528908047.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:47.060Z,1528908047.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:40:47.061Z,1528908047.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:47.429Z,1528908047.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:47.464Z,1528908047.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:40:47.466Z,1528908047.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:47.829Z,1528908047.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:47.867Z,1528908047.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:40:47.868Z,1528908047.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:48.213Z,1528908048.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:48.230Z,1528908048.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:40:48.231Z,1528908048.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:48.615Z,1528908048.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:48.633Z,1528908048.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:40:48.634Z,1528908048.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:49.034Z,1528908049.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:49.063Z,1528908049.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:40:49.064Z,1528908049.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:49.429Z,1528908049.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:49.468Z,1528908049.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:40:49.470Z,1528908049.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:49.829Z,1528908049.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:49.867Z,1528908049.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:40:49.868Z,1528908049.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:50.217Z,1528908050.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:50.234Z,1528908050.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:40:50.235Z,1528908050.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:50.614Z,1528908050.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:50.632Z,1528908050.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:40:50.633Z,1528908050.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:51.029Z,1528908051.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:51.064Z,1528908051.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:40:51.069Z,1528908051.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:51.433Z,1528908051.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:51.466Z,1528908051.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:40:51.467Z,1528908051.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:51.823Z,1528908051.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:51.840Z,1528908051.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:40:51.841Z,1528908051.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:52.215Z,1528908052.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:52.245Z,1528908052.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:40:52.246Z,1528908052.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:52.619Z,1528908052.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:52.643Z,1528908052.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T16:40:52.644Z,1528908052.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:53.027Z,1528908053.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:53.044Z,1528908053.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T16:40:53.046Z,1528908053.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:53.430Z,1528908053.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:53.452Z,1528908053.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:53.832Z,1528908053.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:53.856Z,1528908053.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:54.223Z,1528908054.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:54.241Z,1528908054.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:54.622Z,1528908054.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:54.640Z,1528908054.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:55.031Z,1528908055.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:55.049Z,1528908055.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:55.431Z,1528908055.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:55.448Z,1528908055.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:55.829Z,1528908055.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:55.852Z,1528908055.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:56.220Z,1528908056.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:56.250Z,1528908056.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:56.622Z,1528908056.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:56.652Z,1528908056.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:57.035Z,1528908057.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:57.053Z,1528908057.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:57.436Z,1528908057.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:57.454Z,1528908057.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:57.827Z,1528908057.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:57.846Z,1528908057.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:58.230Z,1528908058.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:58.252Z,1528908058.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:58.255Z,1528908058.255 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T16:40:58.255Z,1528908058.255 [Default:CheckIn:C.Wait] Stopped
2018-06-13T16:40:58.255Z,1528908058.255 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T16:40:58.255Z,1528908058.255 [Default:CheckIn:D] Running Loop=1
2018-06-13T16:40:58.616Z,1528908058.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:40:58.647Z,1528908058.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:40:58.651Z,1528908058.651 [Default:CheckIn:D] Stopped
2018-06-13T16:40:58.651Z,1528908058.651 [Default:CheckIn:E] Running Loop=1
2018-06-13T16:41:01.738Z,1528908061.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:01.758Z,1528908061.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:01.761Z,1528908061.761 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 793.753451 min 
2018-06-13T16:41:01.761Z,1528908061.761 [Default:CheckIn:E] Stopped
2018-06-13T16:41:01.761Z,1528908061.761 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T16:41:01.761Z,1528908061.761 [Default:CheckIn] Stopped
2018-06-13T16:41:01.761Z,1528908061.761 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T16:41:01.762Z,1528908061.762 [Default:CheckIn](INFO): Running loop #77
2018-06-13T16:41:01.762Z,1528908061.762 [Default:CheckIn] Running Loop=77
2018-06-13T16:41:01.762Z,1528908061.762 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T16:41:01.762Z,1528908061.762 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T16:41:01.906Z,1528908061.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:01.941Z,1528908061.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:02.301Z,1528908062.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:02.339Z,1528908062.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:02.690Z,1528908062.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:02.708Z,1528908062.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:03.087Z,1528908063.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:03.109Z,1528908063.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:03.491Z,1528908063.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:03.508Z,1528908063.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:03.889Z,1528908063.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:03.907Z,1528908063.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:04.298Z,1528908064.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:04.324Z,1528908064.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:04.701Z,1528908064.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:04.719Z,1528908064.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:05.098Z,1528908065.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:05.124Z,1528908065.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:05.487Z,1528908065.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:05.510Z,1528908065.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:05.894Z,1528908065.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:05.916Z,1528908065.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:06.290Z,1528908066.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:06.312Z,1528908066.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:06.690Z,1528908066.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:06.712Z,1528908066.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:07.103Z,1528908067.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:07.121Z,1528908067.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:07.503Z,1528908067.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:07.528Z,1528908067.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:07.900Z,1528908067.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:07.918Z,1528908067.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:08.284Z,1528908068.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:08.321Z,1528908068.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:08.683Z,1528908068.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:08.717Z,1528908068.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:09.087Z,1528908069.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:09.115Z,1528908069.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:09.483Z,1528908069.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:09.516Z,1528908069.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:09.883Z,1528908069.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:09.916Z,1528908069.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:10.298Z,1528908070.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:10.322Z,1528908070.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:10.709Z,1528908070.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:10.732Z,1528908070.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:11.099Z,1528908071.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:11.118Z,1528908071.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:11.498Z,1528908071.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:11.523Z,1528908071.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:11.887Z,1528908071.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:11.915Z,1528908071.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:12.283Z,1528908072.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:12.323Z,1528908072.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:12.680Z,1528908072.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:12.713Z,1528908072.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:13.105Z,1528908073.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:13.123Z,1528908073.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:13.494Z,1528908073.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:13.536Z,1528908073.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:13.890Z,1528908073.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:13.916Z,1528908073.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:14.285Z,1528908074.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:14.311Z,1528908074.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:14.684Z,1528908074.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:14.702Z,1528908074.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:15.098Z,1528908075.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:15.139Z,1528908075.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:15.502Z,1528908075.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:15.531Z,1528908075.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:15.902Z,1528908075.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:15.931Z,1528908075.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:16.288Z,1528908076.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:16.307Z,1528908076.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:16.686Z,1528908076.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:16.704Z,1528908076.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:17.093Z,1528908077.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:17.112Z,1528908077.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:17.493Z,1528908077.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:17.512Z,1528908077.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:17.897Z,1528908077.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:17.916Z,1528908077.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:18.288Z,1528908078.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:18.307Z,1528908078.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:18.685Z,1528908078.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:18.702Z,1528908078.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:19.097Z,1528908079.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:19.115Z,1528908079.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:19.497Z,1528908079.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:19.515Z,1528908079.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:19.893Z,1528908079.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:19.911Z,1528908079.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:20.288Z,1528908080.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:20.319Z,1528908080.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:20.688Z,1528908080.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:20.706Z,1528908080.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:21.093Z,1528908081.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:21.111Z,1528908081.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:21.497Z,1528908081.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:21.515Z,1528908081.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:21.894Z,1528908081.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:21.911Z,1528908081.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:22.285Z,1528908082.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:22.303Z,1528908082.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:22.689Z,1528908082.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:22.707Z,1528908082.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:23.094Z,1528908083.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:23.112Z,1528908083.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:23.493Z,1528908083.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:23.511Z,1528908083.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:23.897Z,1528908083.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:23.915Z,1528908083.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:24.289Z,1528908084.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:24.307Z,1528908084.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:24.685Z,1528908084.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:24.702Z,1528908084.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:25.098Z,1528908085.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:25.116Z,1528908085.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:25.497Z,1528908085.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:25.515Z,1528908085.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:25.890Z,1528908085.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:25.908Z,1528908085.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:26.288Z,1528908086.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:26.320Z,1528908086.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:26.689Z,1528908086.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:26.707Z,1528908086.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:27.094Z,1528908087.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:27.112Z,1528908087.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:27.497Z,1528908087.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:27.520Z,1528908087.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:27.898Z,1528908087.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:27.916Z,1528908087.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:28.285Z,1528908088.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:28.304Z,1528908088.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:28.688Z,1528908088.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:28.715Z,1528908088.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:29.098Z,1528908089.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:29.120Z,1528908089.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:29.498Z,1528908089.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:29.515Z,1528908089.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:29.899Z,1528908089.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:29.917Z,1528908089.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:30.290Z,1528908090.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:30.307Z,1528908090.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:30.685Z,1528908090.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:30.703Z,1528908090.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:31.099Z,1528908091.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:31.116Z,1528908091.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:31.499Z,1528908091.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:31.520Z,1528908091.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:31.895Z,1528908091.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:31.913Z,1528908091.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:32.288Z,1528908092.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:32.314Z,1528908092.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:32.693Z,1528908092.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:32.711Z,1528908092.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:33.095Z,1528908093.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:33.112Z,1528908093.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:33.502Z,1528908093.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:33.520Z,1528908093.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:33.899Z,1528908093.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:33.916Z,1528908093.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:34.279Z,1528908094.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:34.306Z,1528908094.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:34.690Z,1528908094.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:34.713Z,1528908094.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:35.099Z,1528908095.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:35.124Z,1528908095.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:35.502Z,1528908095.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:35.520Z,1528908095.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:35.903Z,1528908095.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:35.921Z,1528908095.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:36.287Z,1528908096.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:36.312Z,1528908096.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:36.679Z,1528908096.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:36.718Z,1528908096.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:37.103Z,1528908097.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:37.121Z,1528908097.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:37.503Z,1528908097.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:37.521Z,1528908097.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:37.895Z,1528908097.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:37.912Z,1528908097.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:38.284Z,1528908098.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:38.320Z,1528908098.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:38.683Z,1528908098.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:38.721Z,1528908098.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:39.089Z,1528908099.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:39.123Z,1528908099.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:39.505Z,1528908099.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:39.523Z,1528908099.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:39.903Z,1528908099.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:39.921Z,1528908099.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:40.279Z,1528908100.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:40.310Z,1528908100.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:40.683Z,1528908100.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:40.713Z,1528908100.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:41.093Z,1528908101.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:41.128Z,1528908101.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:41.499Z,1528908101.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:41.526Z,1528908101.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:41.897Z,1528908101.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:41.925Z,1528908101.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:42.284Z,1528908102.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:42.302Z,1528908102.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:42.683Z,1528908102.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:42.700Z,1528908102.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:43.101Z,1528908103.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:43.129Z,1528908103.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:43.502Z,1528908103.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:43.530Z,1528908103.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:43.897Z,1528908103.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:43.935Z,1528908103.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:44.288Z,1528908104.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:44.328Z,1528908104.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:44.686Z,1528908104.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:44.704Z,1528908104.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:45.093Z,1528908105.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:45.111Z,1528908105.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:45.501Z,1528908105.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:45.536Z,1528908105.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:45.889Z,1528908105.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:45.907Z,1528908105.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:46.287Z,1528908106.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:46.305Z,1528908106.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:46.684Z,1528908106.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:46.716Z,1528908106.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:47.094Z,1528908107.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:47.112Z,1528908107.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:47.495Z,1528908107.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:47.513Z,1528908107.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:47.898Z,1528908107.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:47.915Z,1528908107.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:48.291Z,1528908108.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:48.316Z,1528908108.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:48.686Z,1528908108.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:48.704Z,1528908108.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:49.098Z,1528908109.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:49.116Z,1528908109.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:49.498Z,1528908109.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:49.516Z,1528908109.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:49.895Z,1528908109.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:49.914Z,1528908109.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:50.286Z,1528908110.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:50.325Z,1528908110.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:50.694Z,1528908110.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:50.712Z,1528908110.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:51.087Z,1528908111.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:51.105Z,1528908111.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:51.499Z,1528908111.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:51.518Z,1528908111.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:51.898Z,1528908111.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:51.916Z,1528908111.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:52.297Z,1528908112.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:52.315Z,1528908112.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:52.690Z,1528908112.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:52.712Z,1528908112.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:53.090Z,1528908113.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:53.108Z,1528908113.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:53.479Z,1528908113.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:53.518Z,1528908113.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:53.883Z,1528908113.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:53.920Z,1528908113.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:54.289Z,1528908114.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:54.319Z,1528908114.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:54.693Z,1528908114.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:54.721Z,1528908114.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:55.104Z,1528908115.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:55.128Z,1528908115.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:55.479Z,1528908115.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:55.513Z,1528908115.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:55.879Z,1528908115.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:55.897Z,1528908115.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:56.283Z,1528908116.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:56.301Z,1528908116.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:56.688Z,1528908116.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:56.706Z,1528908116.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:57.082Z,1528908117.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:57.099Z,1528908117.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:57.493Z,1528908117.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:57.511Z,1528908117.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:57.898Z,1528908117.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:57.916Z,1528908117.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:58.293Z,1528908118.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:58.316Z,1528908118.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:41:58.690Z,1528908118.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:41:58.712Z,1528908118.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:01.794Z,1528908121.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:01.813Z,1528908121.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:01.955Z,1528908121.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:01.989Z,1528908121.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:02.361Z,1528908122.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:02.388Z,1528908122.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:02.762Z,1528908122.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:02.788Z,1528908122.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:03.153Z,1528908123.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:03.183Z,1528908123.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:03.546Z,1528908123.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:03.564Z,1528908123.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:03.947Z,1528908123.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:03.972Z,1528908123.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:04.344Z,1528908124.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:04.362Z,1528908124.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:04.746Z,1528908124.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:04.768Z,1528908124.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:05.157Z,1528908125.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:05.175Z,1528908125.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:05.553Z,1528908125.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:05.571Z,1528908125.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:05.953Z,1528908125.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:05.972Z,1528908125.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:06.348Z,1528908126.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:06.366Z,1528908126.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:06.748Z,1528908126.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:06.772Z,1528908126.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:07.157Z,1528908127.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:07.175Z,1528908127.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:07.557Z,1528908127.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:07.575Z,1528908127.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:07.950Z,1528908127.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:07.968Z,1528908127.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:08.350Z,1528908128.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:08.372Z,1528908128.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:08.748Z,1528908128.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:08.767Z,1528908128.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:09.150Z,1528908129.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:09.168Z,1528908129.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:09.557Z,1528908129.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:09.575Z,1528908129.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:09.956Z,1528908129.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:09.988Z,1528908129.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:10.339Z,1528908130.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:10.366Z,1528908130.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:10.743Z,1528908130.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:10.772Z,1528908130.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:11.163Z,1528908131.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:11.181Z,1528908131.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:11.559Z,1528908131.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:11.577Z,1528908131.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:11.963Z,1528908131.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:11.981Z,1528908131.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:12.344Z,1528908132.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:12.372Z,1528908132.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:12.739Z,1528908132.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:12.775Z,1528908132.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:13.164Z,1528908133.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:13.188Z,1528908133.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:13.563Z,1528908133.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:13.582Z,1528908133.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:13.952Z,1528908133.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:13.978Z,1528908133.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:14.344Z,1528908134.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:14.380Z,1528908134.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:14.743Z,1528908134.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:14.780Z,1528908134.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:15.155Z,1528908135.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:15.173Z,1528908135.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:15.558Z,1528908135.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:15.591Z,1528908135.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:15.959Z,1528908135.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:15.977Z,1528908135.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:16.339Z,1528908136.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:16.372Z,1528908136.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:16.743Z,1528908136.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:16.771Z,1528908136.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:17.163Z,1528908137.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:17.181Z,1528908137.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:17.559Z,1528908137.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:17.578Z,1528908137.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:17.964Z,1528908137.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:17.988Z,1528908137.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:18.348Z,1528908138.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:18.376Z,1528908138.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:18.741Z,1528908138.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:18.769Z,1528908138.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:19.164Z,1528908139.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:19.188Z,1528908139.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:19.563Z,1528908139.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:19.582Z,1528908139.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:19.956Z,1528908139.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:19.974Z,1528908139.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:20.345Z,1528908140.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:20.380Z,1528908140.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:20.743Z,1528908140.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:20.771Z,1528908140.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:21.156Z,1528908141.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:21.174Z,1528908141.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:21.558Z,1528908141.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:21.577Z,1528908141.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:21.958Z,1528908141.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:21.976Z,1528908141.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:22.349Z,1528908142.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:22.368Z,1528908142.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:22.747Z,1528908142.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:22.771Z,1528908142.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:23.157Z,1528908143.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:23.183Z,1528908143.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:23.558Z,1528908143.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:23.575Z,1528908143.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:23.958Z,1528908143.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:23.976Z,1528908143.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:24.349Z,1528908144.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:24.367Z,1528908144.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:24.745Z,1528908144.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:24.763Z,1528908144.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:25.159Z,1528908145.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:25.177Z,1528908145.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:25.558Z,1528908145.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:25.576Z,1528908145.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:25.955Z,1528908145.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:25.973Z,1528908145.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:26.350Z,1528908146.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:26.368Z,1528908146.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:26.749Z,1528908146.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:26.767Z,1528908146.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:27.156Z,1528908147.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:27.174Z,1528908147.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:27.572Z,1528908147.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:27.590Z,1528908147.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:27.957Z,1528908147.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:27.992Z,1528908147.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:28.343Z,1528908148.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:28.360Z,1528908148.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:28.744Z,1528908148.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:28.761Z,1528908148.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:29.143Z,1528908149.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:29.189Z,1528908149.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:29.557Z,1528908149.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:29.591Z,1528908149.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:29.965Z,1528908149.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:29.991Z,1528908149.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:30.354Z,1528908150.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:30.371Z,1528908150.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:30.745Z,1528908150.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:30.768Z,1528908150.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:31.146Z,1528908151.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:31.164Z,1528908151.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:31.547Z,1528908151.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:31.565Z,1528908151.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:31.949Z,1528908151.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:31.967Z,1528908151.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:32.358Z,1528908152.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:32.399Z,1528908152.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:32.758Z,1528908152.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:32.776Z,1528908152.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:33.151Z,1528908153.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:33.169Z,1528908153.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:33.546Z,1528908153.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:33.580Z,1528908153.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:33.942Z,1528908153.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:33.969Z,1528908153.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:34.349Z,1528908154.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:34.367Z,1528908154.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:34.752Z,1528908154.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:34.770Z,1528908154.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:35.149Z,1528908155.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:35.167Z,1528908155.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:35.558Z,1528908155.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:35.577Z,1528908155.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:35.960Z,1528908155.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:35.979Z,1528908155.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:36.355Z,1528908156.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:36.373Z,1528908156.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:36.750Z,1528908156.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:36.768Z,1528908156.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:37.150Z,1528908157.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:37.181Z,1528908157.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:37.543Z,1528908157.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:37.569Z,1528908157.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:37.949Z,1528908157.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:37.967Z,1528908157.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:38.359Z,1528908158.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:38.377Z,1528908158.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:38.759Z,1528908158.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:38.777Z,1528908158.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:39.155Z,1528908159.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:39.180Z,1528908159.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:39.550Z,1528908159.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:39.569Z,1528908159.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:39.943Z,1528908159.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:39.972Z,1528908159.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:40.339Z,1528908160.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:40.376Z,1528908160.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:40.750Z,1528908160.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:40.769Z,1528908160.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:41.139Z,1528908161.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:41.176Z,1528908161.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:41.562Z,1528908161.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:41.580Z,1528908161.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:41.963Z,1528908161.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:41.981Z,1528908161.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:42.355Z,1528908162.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:42.373Z,1528908162.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:42.749Z,1528908162.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:42.767Z,1528908162.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:43.150Z,1528908163.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:43.172Z,1528908163.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:43.540Z,1528908163.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:43.582Z,1528908163.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:43.949Z,1528908163.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:43.967Z,1528908163.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:44.363Z,1528908164.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:44.381Z,1528908164.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:44.759Z,1528908164.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:44.777Z,1528908164.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:45.159Z,1528908165.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:45.177Z,1528908165.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:45.539Z,1528908165.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:45.576Z,1528908165.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:45.939Z,1528908165.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:45.976Z,1528908165.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:46.343Z,1528908166.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:46.380Z,1528908166.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:46.744Z,1528908166.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:46.780Z,1528908166.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:47.139Z,1528908167.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:47.176Z,1528908167.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:47.555Z,1528908167.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:47.574Z,1528908167.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:47.964Z,1528908167.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:47.981Z,1528908167.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:48.363Z,1528908168.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:48.381Z,1528908168.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:48.743Z,1528908168.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:48.777Z,1528908168.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:49.143Z,1528908169.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:49.182Z,1528908169.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:49.540Z,1528908169.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:49.576Z,1528908169.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:49.942Z,1528908169.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:49.977Z,1528908169.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:50.365Z,1528908170.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:50.383Z,1528908170.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:50.763Z,1528908170.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:50.782Z,1528908170.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:51.159Z,1528908171.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:51.177Z,1528908171.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:51.543Z,1528908171.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:51.582Z,1528908171.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:51.939Z,1528908171.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:51.968Z,1528908171.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:52.343Z,1528908172.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:52.380Z,1528908172.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:52.744Z,1528908172.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:52.784Z,1528908172.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:53.144Z,1528908173.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:53.182Z,1528908173.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:53.553Z,1528908173.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:53.587Z,1528908173.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:53.957Z,1528908173.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:53.985Z,1528908173.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:54.353Z,1528908174.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:54.393Z,1528908174.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:54.739Z,1528908174.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:54.756Z,1528908174.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:55.144Z,1528908175.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:55.162Z,1528908175.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:55.544Z,1528908175.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:55.562Z,1528908175.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:55.943Z,1528908175.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:55.960Z,1528908175.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:56.361Z,1528908176.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:56.390Z,1528908176.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:56.761Z,1528908176.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:56.789Z,1528908176.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:57.157Z,1528908177.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:57.191Z,1528908177.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:57.547Z,1528908177.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:57.565Z,1528908177.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:57.947Z,1528908177.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:57.965Z,1528908177.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:58.343Z,1528908178.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:58.361Z,1528908178.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:42:58.748Z,1528908178.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:42:58.782Z,1528908178.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:01.859Z,1528908181.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:01.891Z,1528908181.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:02.032Z,1528908182.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:02.068Z,1528908182.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:02.430Z,1528908182.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:02.452Z,1528908182.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:02.831Z,1528908182.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:02.849Z,1528908182.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:03.209Z,1528908183.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:03.244Z,1528908183.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:03.608Z,1528908183.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:03.644Z,1528908183.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:04.007Z,1528908184.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:04.045Z,1528908184.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:04.417Z,1528908184.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:04.444Z,1528908184.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:04.821Z,1528908184.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:04.856Z,1528908184.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:05.217Z,1528908185.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:05.246Z,1528908185.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:05.607Z,1528908185.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:05.624Z,1528908185.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:06.008Z,1528908186.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:06.026Z,1528908186.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:06.408Z,1528908186.408 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:06.426Z,1528908186.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:06.810Z,1528908186.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:06.828Z,1528908186.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:07.221Z,1528908187.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:07.255Z,1528908187.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:07.621Z,1528908187.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:07.654Z,1528908187.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:08.022Z,1528908188.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:08.059Z,1528908188.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:08.409Z,1528908188.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:08.432Z,1528908188.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:08.810Z,1528908188.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:08.828Z,1528908188.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:09.221Z,1528908189.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:09.255Z,1528908189.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:09.621Z,1528908189.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:09.639Z,1528908189.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:10.018Z,1528908190.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:10.036Z,1528908190.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:10.412Z,1528908190.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:10.430Z,1528908190.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:10.815Z,1528908190.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:10.832Z,1528908190.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:11.217Z,1528908191.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:11.235Z,1528908191.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:11.621Z,1528908191.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:11.639Z,1528908191.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:12.021Z,1528908192.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:12.039Z,1528908192.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:12.407Z,1528908192.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:12.433Z,1528908192.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:12.814Z,1528908192.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:12.836Z,1528908192.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:13.211Z,1528908193.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:13.243Z,1528908193.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:13.619Z,1528908193.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:13.644Z,1528908193.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:14.021Z,1528908194.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:14.039Z,1528908194.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:14.421Z,1528908194.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:14.439Z,1528908194.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:14.813Z,1528908194.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:14.836Z,1528908194.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:15.213Z,1528908195.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:15.231Z,1528908195.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:15.611Z,1528908195.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:15.629Z,1528908195.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:16.007Z,1528908196.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:16.032Z,1528908196.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:16.421Z,1528908196.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:16.439Z,1528908196.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:16.829Z,1528908196.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:16.852Z,1528908196.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:17.217Z,1528908197.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:17.256Z,1528908197.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:17.608Z,1528908197.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:17.642Z,1528908197.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:18.008Z,1528908198.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:18.026Z,1528908198.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:18.411Z,1528908198.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:18.429Z,1528908198.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:18.811Z,1528908198.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:18.836Z,1528908198.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:19.210Z,1528908199.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:19.236Z,1528908199.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:19.614Z,1528908199.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:19.633Z,1528908199.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:20.021Z,1528908200.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:20.060Z,1528908200.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:20.421Z,1528908200.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:20.439Z,1528908200.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:20.806Z,1528908200.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:20.840Z,1528908200.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:21.207Z,1528908201.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:21.231Z,1528908201.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:21.612Z,1528908201.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:21.638Z,1528908201.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:22.014Z,1528908202.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:22.036Z,1528908202.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:22.420Z,1528908202.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:22.438Z,1528908202.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:22.823Z,1528908202.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:22.841Z,1528908202.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:23.224Z,1528908203.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:23.242Z,1528908203.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:23.608Z,1528908203.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:23.627Z,1528908203.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:24.006Z,1528908204.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:24.040Z,1528908204.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:24.414Z,1528908204.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:24.432Z,1528908204.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:24.813Z,1528908204.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:24.832Z,1528908204.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:25.206Z,1528908205.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:25.240Z,1528908205.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:25.622Z,1528908205.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:25.640Z,1528908205.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:26.022Z,1528908206.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:26.040Z,1528908206.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:26.423Z,1528908206.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:26.445Z,1528908206.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:26.813Z,1528908206.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:26.831Z,1528908206.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:27.209Z,1528908207.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:27.227Z,1528908207.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:27.615Z,1528908207.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:27.633Z,1528908207.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:28.011Z,1528908208.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:28.034Z,1528908208.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:28.422Z,1528908208.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:28.441Z,1528908208.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:28.822Z,1528908208.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:28.844Z,1528908208.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:29.223Z,1528908209.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:29.240Z,1528908209.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:29.613Z,1528908209.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:29.631Z,1528908209.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:30.011Z,1528908210.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:30.041Z,1528908210.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:30.411Z,1528908210.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:30.435Z,1528908210.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:30.803Z,1528908210.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:30.838Z,1528908210.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:31.207Z,1528908211.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:31.240Z,1528908211.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:31.623Z,1528908211.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:31.641Z,1528908211.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:32.027Z,1528908212.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:32.045Z,1528908212.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:32.428Z,1528908212.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:32.452Z,1528908212.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:32.807Z,1528908212.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:32.844Z,1528908212.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:33.203Z,1528908213.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:33.237Z,1528908213.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:33.608Z,1528908213.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:33.635Z,1528908213.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:34.008Z,1528908214.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:34.036Z,1528908214.036 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:34.036Z,1528908214.036 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 265
2018-06-13T16:43:34.036Z,1528908214.036 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:43:34.038Z,1528908214.038 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:34.038Z,1528908214.038 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 265
2018-06-13T16:43:34.038Z,1528908214.038 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:43:34.040Z,1528908214.040 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:34.040Z,1528908214.040 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 265
2018-06-13T16:43:34.040Z,1528908214.040 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:43:34.122Z,1528908214.122 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:43:34.122Z,1528908214.122 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:43:34.122Z,1528908214.122 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:43:34.417Z,1528908214.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:34.530Z,1528908214.530 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:43:34.530Z,1528908214.530 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 265
2018-06-13T16:43:34.530Z,1528908214.530 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:43:34.530Z,1528908214.530 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 265
2018-06-13T16:43:34.531Z,1528908214.531 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:43:34.531Z,1528908214.531 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 265
2018-06-13T16:43:34.825Z,1528908214.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:34.852Z,1528908214.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:43:34.853Z,1528908214.853 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:43:34.853Z,1528908214.853 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:43:34.853Z,1528908214.853 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:43:34.854Z,1528908214.854 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:43:34.854Z,1528908214.854 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:43:34.854Z,1528908214.854 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:43:34.855Z,1528908214.855 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:43:34.855Z,1528908214.855 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:43:35.213Z,1528908215.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:35.231Z,1528908215.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:43:35.232Z,1528908215.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:35.609Z,1528908215.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:35.627Z,1528908215.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:43:35.628Z,1528908215.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:36.006Z,1528908216.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:36.028Z,1528908216.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:43:36.033Z,1528908216.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:36.407Z,1528908216.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:36.441Z,1528908216.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:43:36.442Z,1528908216.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:36.810Z,1528908216.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:36.834Z,1528908216.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:43:36.835Z,1528908216.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:37.211Z,1528908217.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:37.242Z,1528908217.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:43:37.243Z,1528908217.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:37.617Z,1528908217.617 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:37.635Z,1528908217.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:43:37.636Z,1528908217.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:38.018Z,1528908218.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:38.036Z,1528908218.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:43:38.037Z,1528908218.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:38.421Z,1528908218.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:38.439Z,1528908218.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:43:38.440Z,1528908218.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:38.813Z,1528908218.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:38.831Z,1528908218.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:43:38.832Z,1528908218.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:39.213Z,1528908219.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:39.231Z,1528908219.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:43:39.232Z,1528908219.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:39.615Z,1528908219.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:39.632Z,1528908219.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:43:39.633Z,1528908219.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:40.011Z,1528908220.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:40.045Z,1528908220.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:43:40.046Z,1528908220.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:40.419Z,1528908220.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:40.437Z,1528908220.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:43:40.438Z,1528908220.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:40.823Z,1528908220.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:40.840Z,1528908220.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:43:40.842Z,1528908220.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:41.222Z,1528908221.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:41.240Z,1528908221.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:43:41.241Z,1528908221.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:41.613Z,1528908221.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:41.630Z,1528908221.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:43:41.631Z,1528908221.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:42.014Z,1528908222.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:42.031Z,1528908222.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:43:42.032Z,1528908222.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:42.411Z,1528908222.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:42.434Z,1528908222.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:43:42.435Z,1528908222.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:42.809Z,1528908222.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:42.827Z,1528908222.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:43:42.828Z,1528908222.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:43.207Z,1528908223.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:43.231Z,1528908223.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:43:43.232Z,1528908223.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:43.622Z,1528908223.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:43.648Z,1528908223.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:43:43.649Z,1528908223.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:44.022Z,1528908224.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:44.039Z,1528908224.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:43:44.040Z,1528908224.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:44.422Z,1528908224.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:44.440Z,1528908224.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:43:44.441Z,1528908224.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:44.811Z,1528908224.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:44.835Z,1528908224.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:43:44.836Z,1528908224.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:45.206Z,1528908225.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:45.235Z,1528908225.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:43:45.235Z,1528908225.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:45.612Z,1528908225.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:45.644Z,1528908225.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:43:45.645Z,1528908225.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:46.013Z,1528908226.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:46.030Z,1528908226.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:43:46.031Z,1528908226.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:46.422Z,1528908226.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:46.440Z,1528908226.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:43:46.441Z,1528908226.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:46.822Z,1528908226.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:46.844Z,1528908226.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:43:46.845Z,1528908226.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:47.222Z,1528908227.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:47.239Z,1528908227.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:43:47.240Z,1528908227.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:47.613Z,1528908227.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:47.631Z,1528908227.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:43:47.632Z,1528908227.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:48.014Z,1528908228.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:48.035Z,1528908228.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:43:48.036Z,1528908228.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:48.407Z,1528908228.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:48.431Z,1528908228.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:43:48.432Z,1528908228.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:48.813Z,1528908228.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:48.830Z,1528908228.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:43:48.831Z,1528908228.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:49.211Z,1528908229.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:49.234Z,1528908229.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:43:49.235Z,1528908229.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:49.622Z,1528908229.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:49.648Z,1528908229.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:43:49.649Z,1528908229.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:50.026Z,1528908230.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:50.043Z,1528908230.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:43:50.044Z,1528908230.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:50.427Z,1528908230.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:50.452Z,1528908230.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:43:50.469Z,1528908230.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:50.813Z,1528908230.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:50.830Z,1528908230.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:43:50.831Z,1528908230.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:51.215Z,1528908231.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:51.234Z,1528908231.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:43:51.235Z,1528908231.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:51.613Z,1528908231.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:51.631Z,1528908231.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:43:51.632Z,1528908231.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:52.011Z,1528908232.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:52.035Z,1528908232.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:43:52.036Z,1528908232.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:52.423Z,1528908232.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:52.441Z,1528908232.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:43:52.442Z,1528908232.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:52.827Z,1528908232.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:52.844Z,1528908232.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:43:52.846Z,1528908232.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:53.218Z,1528908233.218 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:53.243Z,1528908233.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:43:53.244Z,1528908233.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:53.607Z,1528908233.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:53.634Z,1528908233.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T16:43:53.635Z,1528908233.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:54.007Z,1528908234.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:54.035Z,1528908234.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T16:43:54.036Z,1528908234.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:54.407Z,1528908234.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:54.444Z,1528908234.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:54.803Z,1528908234.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:54.837Z,1528908234.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:55.207Z,1528908235.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:55.235Z,1528908235.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:55.628Z,1528908235.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:55.646Z,1528908235.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:56.027Z,1528908236.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:56.045Z,1528908236.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:56.428Z,1528908236.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:56.447Z,1528908236.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:56.807Z,1528908236.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:56.836Z,1528908236.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:57.209Z,1528908237.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:57.238Z,1528908237.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:57.608Z,1528908237.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:57.644Z,1528908237.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:58.007Z,1528908238.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:58.048Z,1528908238.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:58.425Z,1528908238.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:58.443Z,1528908238.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:43:58.832Z,1528908238.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:43:58.856Z,1528908238.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:01.933Z,1528908241.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:01.952Z,1528908241.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:02.087Z,1528908242.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:02.129Z,1528908242.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:02.482Z,1528908242.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:02.505Z,1528908242.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:02.882Z,1528908242.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:02.900Z,1528908242.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:03.279Z,1528908243.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:03.298Z,1528908243.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:03.690Z,1528908243.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:03.707Z,1528908243.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:04.086Z,1528908244.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:04.103Z,1528908244.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:04.484Z,1528908244.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:04.502Z,1528908244.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:04.882Z,1528908244.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:04.900Z,1528908244.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:05.275Z,1528908245.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:05.321Z,1528908245.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:05.678Z,1528908245.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:05.696Z,1528908245.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:06.082Z,1528908246.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:06.100Z,1528908246.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:06.495Z,1528908246.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:06.529Z,1528908246.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:06.889Z,1528908246.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:06.908Z,1528908246.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:07.287Z,1528908247.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:07.306Z,1528908247.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:07.682Z,1528908247.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:07.700Z,1528908247.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:08.083Z,1528908248.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:08.101Z,1528908248.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:08.483Z,1528908248.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:08.500Z,1528908248.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:08.882Z,1528908248.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:08.900Z,1528908248.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:09.277Z,1528908249.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:09.296Z,1528908249.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:09.690Z,1528908249.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:09.708Z,1528908249.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:10.087Z,1528908250.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:10.112Z,1528908250.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:10.487Z,1528908250.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:10.506Z,1528908250.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:10.882Z,1528908250.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:10.901Z,1528908250.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:11.281Z,1528908251.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:11.299Z,1528908251.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:11.677Z,1528908251.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:11.695Z,1528908251.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:12.079Z,1528908252.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:12.104Z,1528908252.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:12.490Z,1528908252.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:12.508Z,1528908252.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:12.890Z,1528908252.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:12.908Z,1528908252.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:13.288Z,1528908253.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:13.314Z,1528908253.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:13.679Z,1528908253.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:13.703Z,1528908253.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:14.071Z,1528908254.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:14.106Z,1528908254.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:14.475Z,1528908254.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:14.509Z,1528908254.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:14.872Z,1528908254.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:14.906Z,1528908254.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:15.271Z,1528908255.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:15.288Z,1528908255.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:15.690Z,1528908255.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:15.724Z,1528908255.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:16.089Z,1528908256.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:16.124Z,1528908256.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:16.481Z,1528908256.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:16.520Z,1528908256.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:16.875Z,1528908256.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:16.906Z,1528908256.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:17.275Z,1528908257.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:17.293Z,1528908257.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:17.675Z,1528908257.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:17.693Z,1528908257.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:18.079Z,1528908258.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:18.120Z,1528908258.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:18.490Z,1528908258.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:18.523Z,1528908258.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:18.885Z,1528908258.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:18.904Z,1528908258.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:19.290Z,1528908259.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:19.307Z,1528908259.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:19.682Z,1528908259.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:19.700Z,1528908259.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:20.076Z,1528908260.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:20.094Z,1528908260.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:20.482Z,1528908260.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:20.499Z,1528908260.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:20.880Z,1528908260.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:20.899Z,1528908260.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:21.277Z,1528908261.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:21.295Z,1528908261.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:21.690Z,1528908261.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:21.712Z,1528908261.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:22.086Z,1528908262.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:22.103Z,1528908262.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:22.482Z,1528908262.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:22.500Z,1528908262.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:22.881Z,1528908262.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:22.899Z,1528908262.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:23.280Z,1528908263.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:23.304Z,1528908263.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:23.677Z,1528908263.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:23.697Z,1528908263.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:24.080Z,1528908264.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:24.099Z,1528908264.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:24.486Z,1528908264.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:24.504Z,1528908264.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:24.885Z,1528908264.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:24.903Z,1528908264.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:25.290Z,1528908265.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:25.331Z,1528908265.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:25.680Z,1528908265.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:25.698Z,1528908265.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:26.076Z,1528908266.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:26.095Z,1528908266.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:26.482Z,1528908266.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:26.508Z,1528908266.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:26.880Z,1528908266.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:26.898Z,1528908266.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:27.277Z,1528908267.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:27.295Z,1528908267.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:27.690Z,1528908267.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:27.707Z,1528908267.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:28.090Z,1528908268.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:28.107Z,1528908268.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:28.482Z,1528908268.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:28.501Z,1528908268.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:28.881Z,1528908268.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:28.904Z,1528908268.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:29.280Z,1528908269.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:29.298Z,1528908269.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:29.677Z,1528908269.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:29.695Z,1528908269.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:30.081Z,1528908270.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:30.099Z,1528908270.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:30.486Z,1528908270.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:30.504Z,1528908270.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:30.885Z,1528908270.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:30.903Z,1528908270.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:31.290Z,1528908271.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:31.307Z,1528908271.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:31.679Z,1528908271.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:31.704Z,1528908271.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:32.077Z,1528908272.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:32.095Z,1528908272.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:32.481Z,1528908272.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:32.499Z,1528908272.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:32.880Z,1528908272.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:32.899Z,1528908272.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:33.276Z,1528908273.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:33.295Z,1528908273.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:33.690Z,1528908273.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:33.707Z,1528908273.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:34.090Z,1528908274.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:34.107Z,1528908274.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:34.482Z,1528908274.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:34.500Z,1528908274.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:34.881Z,1528908274.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:34.899Z,1528908274.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:35.279Z,1528908275.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:35.305Z,1528908275.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:35.677Z,1528908275.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:35.700Z,1528908275.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:36.080Z,1528908276.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:36.112Z,1528908276.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:36.490Z,1528908276.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:36.512Z,1528908276.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:36.890Z,1528908276.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:36.907Z,1528908276.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:37.291Z,1528908277.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:37.308Z,1528908277.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:37.681Z,1528908277.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:37.699Z,1528908277.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:38.078Z,1528908278.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:38.096Z,1528908278.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:38.482Z,1528908278.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:38.499Z,1528908278.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:38.882Z,1528908278.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:38.900Z,1528908278.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:39.277Z,1528908279.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:39.295Z,1528908279.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:39.691Z,1528908279.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:39.716Z,1528908279.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:40.091Z,1528908280.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:40.109Z,1528908280.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:40.488Z,1528908280.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:40.506Z,1528908280.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:40.882Z,1528908280.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:40.904Z,1528908280.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:41.281Z,1528908281.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:41.307Z,1528908281.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:41.678Z,1528908281.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:41.696Z,1528908281.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:42.083Z,1528908282.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:42.100Z,1528908282.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:42.490Z,1528908282.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:42.507Z,1528908282.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:42.891Z,1528908282.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:42.908Z,1528908282.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:43.291Z,1528908283.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:43.331Z,1528908283.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:43.682Z,1528908283.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:43.700Z,1528908283.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:44.077Z,1528908284.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:44.096Z,1528908284.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:44.483Z,1528908284.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:44.502Z,1528908284.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:44.882Z,1528908284.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:44.914Z,1528908284.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:45.271Z,1528908285.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:45.311Z,1528908285.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:45.694Z,1528908285.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:45.721Z,1528908285.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:46.098Z,1528908286.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:46.124Z,1528908286.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:46.496Z,1528908286.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:46.515Z,1528908286.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:46.876Z,1528908286.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:46.907Z,1528908286.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:47.272Z,1528908287.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:47.300Z,1528908287.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:47.686Z,1528908287.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:47.704Z,1528908287.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:48.076Z,1528908288.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:48.105Z,1528908288.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:48.493Z,1528908288.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:48.511Z,1528908288.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:48.896Z,1528908288.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:48.915Z,1528908288.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:49.296Z,1528908289.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:49.314Z,1528908289.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:49.672Z,1528908289.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:49.708Z,1528908289.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:50.075Z,1528908290.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:50.109Z,1528908290.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:50.475Z,1528908290.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:50.504Z,1528908290.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:50.876Z,1528908290.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:50.904Z,1528908290.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:51.271Z,1528908291.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:51.296Z,1528908291.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:51.694Z,1528908291.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:51.719Z,1528908291.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:52.096Z,1528908292.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:52.114Z,1528908292.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:52.485Z,1528908292.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:52.513Z,1528908292.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:52.875Z,1528908292.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:52.909Z,1528908292.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:53.275Z,1528908293.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:53.316Z,1528908293.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:53.676Z,1528908293.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:53.710Z,1528908293.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:54.075Z,1528908294.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:54.093Z,1528908294.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:54.493Z,1528908294.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:54.522Z,1528908294.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:54.893Z,1528908294.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:54.920Z,1528908294.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:55.293Z,1528908295.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:55.321Z,1528908295.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:55.679Z,1528908295.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:55.696Z,1528908295.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:56.077Z,1528908296.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:56.095Z,1528908296.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:56.479Z,1528908296.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:56.497Z,1528908296.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:56.874Z,1528908296.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:56.892Z,1528908296.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:57.278Z,1528908297.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:57.295Z,1528908297.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:57.689Z,1528908297.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:57.726Z,1528908297.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:58.085Z,1528908298.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:58.103Z,1528908298.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:58.493Z,1528908298.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:58.527Z,1528908298.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:44:58.882Z,1528908298.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:44:58.900Z,1528908298.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:01.993Z,1528908301.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:02.027Z,1528908302.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:02.143Z,1528908302.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:02.184Z,1528908302.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:02.564Z,1528908302.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:02.582Z,1528908302.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:02.953Z,1528908302.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:02.988Z,1528908302.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:03.344Z,1528908303.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:03.378Z,1528908303.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:03.739Z,1528908303.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:03.757Z,1528908303.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:04.138Z,1528908304.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:04.156Z,1528908304.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:04.539Z,1528908304.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:04.558Z,1528908304.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:04.940Z,1528908304.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:04.974Z,1528908304.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:05.342Z,1528908305.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:05.360Z,1528908305.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:05.753Z,1528908305.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:05.783Z,1528908305.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:06.154Z,1528908306.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:06.171Z,1528908306.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:06.546Z,1528908306.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:06.569Z,1528908306.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:06.943Z,1528908306.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:06.961Z,1528908306.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:07.346Z,1528908307.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:07.364Z,1528908307.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:07.744Z,1528908307.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:07.762Z,1528908307.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:08.144Z,1528908308.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:08.162Z,1528908308.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:08.553Z,1528908308.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:08.571Z,1528908308.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:08.949Z,1528908308.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:08.967Z,1528908308.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:09.350Z,1528908309.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:09.367Z,1528908309.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:09.742Z,1528908309.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:09.775Z,1528908309.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:10.135Z,1528908310.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:10.172Z,1528908310.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:10.544Z,1528908310.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:10.562Z,1528908310.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:10.943Z,1528908310.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:10.968Z,1528908310.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:11.335Z,1528908311.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:11.373Z,1528908311.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:11.755Z,1528908311.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:11.773Z,1528908311.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:12.159Z,1528908312.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:12.177Z,1528908312.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:12.551Z,1528908312.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:12.569Z,1528908312.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:12.944Z,1528908312.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:12.962Z,1528908312.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:13.346Z,1528908313.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:13.368Z,1528908313.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:13.736Z,1528908313.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:13.772Z,1528908313.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:14.146Z,1528908314.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:14.163Z,1528908314.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:14.559Z,1528908314.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:14.577Z,1528908314.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:14.955Z,1528908314.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:14.973Z,1528908314.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:15.355Z,1528908315.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:15.372Z,1528908315.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:15.739Z,1528908315.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:15.778Z,1528908315.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:16.135Z,1528908316.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:16.173Z,1528908316.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:16.539Z,1528908316.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:16.566Z,1528908316.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:16.940Z,1528908316.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:16.976Z,1528908316.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:17.335Z,1528908317.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:17.372Z,1528908317.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:17.755Z,1528908317.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:17.777Z,1528908317.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:18.160Z,1528908318.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:18.178Z,1528908318.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:18.551Z,1528908318.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:18.569Z,1528908318.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:18.935Z,1528908318.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:18.971Z,1528908318.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:19.339Z,1528908319.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:19.366Z,1528908319.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:19.739Z,1528908319.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:19.768Z,1528908319.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:20.139Z,1528908320.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:20.166Z,1528908320.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:20.560Z,1528908320.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:20.584Z,1528908320.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:20.960Z,1528908320.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:20.978Z,1528908320.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:21.355Z,1528908321.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:21.373Z,1528908321.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:21.743Z,1528908321.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:21.771Z,1528908321.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:22.135Z,1528908322.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:22.164Z,1528908322.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:22.539Z,1528908322.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:22.573Z,1528908322.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:22.940Z,1528908322.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:22.979Z,1528908322.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:23.339Z,1528908323.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:23.377Z,1528908323.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:23.750Z,1528908323.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:23.784Z,1528908323.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:24.153Z,1528908324.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:24.181Z,1528908324.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:24.549Z,1528908324.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:24.588Z,1528908324.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:24.939Z,1528908324.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:24.980Z,1528908324.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:25.343Z,1528908325.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:25.361Z,1528908325.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:25.739Z,1528908325.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:25.757Z,1528908325.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:26.142Z,1528908326.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:26.168Z,1528908326.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:26.553Z,1528908326.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:26.571Z,1528908326.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:26.953Z,1528908326.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:26.971Z,1528908326.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:27.350Z,1528908327.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:27.368Z,1528908327.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:27.746Z,1528908327.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:27.764Z,1528908327.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:28.139Z,1528908328.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:28.177Z,1528908328.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:28.546Z,1528908328.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:28.564Z,1528908328.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:28.946Z,1528908328.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:28.964Z,1528908328.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:29.339Z,1528908329.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:29.365Z,1528908329.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:29.750Z,1528908329.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:29.769Z,1528908329.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:30.153Z,1528908330.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:30.171Z,1528908330.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:30.554Z,1528908330.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:30.573Z,1528908330.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:30.942Z,1528908330.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:30.959Z,1528908330.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:31.347Z,1528908331.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:31.365Z,1528908331.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:31.744Z,1528908331.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:31.775Z,1528908331.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:32.142Z,1528908332.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:32.159Z,1528908332.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:32.555Z,1528908332.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:32.574Z,1528908332.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:32.955Z,1528908332.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:32.980Z,1528908332.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:33.355Z,1528908333.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:33.373Z,1528908333.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:33.746Z,1528908333.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:33.764Z,1528908333.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:34.143Z,1528908334.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:34.168Z,1528908334.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:34.540Z,1528908334.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:34.558Z,1528908334.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:34.935Z,1528908334.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:34.973Z,1528908334.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:35.340Z,1528908335.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:35.377Z,1528908335.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:35.745Z,1528908335.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:35.780Z,1528908335.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:36.159Z,1528908336.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:36.176Z,1528908336.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:36.555Z,1528908336.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:36.574Z,1528908336.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:36.935Z,1528908336.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:36.975Z,1528908336.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:37.339Z,1528908337.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:37.377Z,1528908337.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:37.740Z,1528908337.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:37.770Z,1528908337.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:38.142Z,1528908338.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:38.160Z,1528908338.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:38.557Z,1528908338.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:38.585Z,1528908338.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:38.957Z,1528908338.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:38.985Z,1528908338.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:39.353Z,1528908339.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:39.389Z,1528908339.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:39.743Z,1528908339.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:39.761Z,1528908339.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:40.143Z,1528908340.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:40.161Z,1528908340.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:40.537Z,1528908340.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:40.555Z,1528908340.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:40.943Z,1528908340.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:40.968Z,1528908340.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:41.342Z,1528908341.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:41.360Z,1528908341.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:41.745Z,1528908341.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:41.763Z,1528908341.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:42.154Z,1528908342.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:42.171Z,1528908342.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:42.549Z,1528908342.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:42.567Z,1528908342.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:42.941Z,1528908342.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:42.959Z,1528908342.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:43.345Z,1528908343.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:43.363Z,1528908343.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:43.744Z,1528908343.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:43.762Z,1528908343.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:44.140Z,1528908344.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:44.158Z,1528908344.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:44.553Z,1528908344.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:44.571Z,1528908344.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:44.953Z,1528908344.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:44.971Z,1528908344.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:45.346Z,1528908345.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:45.364Z,1528908345.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:45.746Z,1528908345.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:45.763Z,1528908345.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:46.139Z,1528908346.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:46.171Z,1528908346.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:46.543Z,1528908346.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:46.561Z,1528908346.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:46.944Z,1528908346.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:46.970Z,1528908346.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:47.344Z,1528908347.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:47.362Z,1528908347.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:47.750Z,1528908347.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:47.768Z,1528908347.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:48.153Z,1528908348.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:48.171Z,1528908348.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:48.550Z,1528908348.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:48.572Z,1528908348.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:48.941Z,1528908348.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:48.959Z,1528908348.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:49.346Z,1528908349.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:49.363Z,1528908349.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:49.744Z,1528908349.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:49.770Z,1528908349.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:50.140Z,1528908350.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:50.158Z,1528908350.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:50.553Z,1528908350.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:50.571Z,1528908350.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:50.953Z,1528908350.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:50.971Z,1528908350.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:51.350Z,1528908351.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:51.368Z,1528908351.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:51.746Z,1528908351.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:51.764Z,1528908351.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:52.145Z,1528908352.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:52.163Z,1528908352.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:52.541Z,1528908352.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:52.559Z,1528908352.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:52.946Z,1528908352.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:52.963Z,1528908352.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:53.343Z,1528908353.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:53.369Z,1528908353.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:53.755Z,1528908353.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:53.774Z,1528908353.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:54.159Z,1528908354.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:54.176Z,1528908354.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:54.559Z,1528908354.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:54.577Z,1528908354.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:54.939Z,1528908354.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:54.966Z,1528908354.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:55.339Z,1528908355.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:55.367Z,1528908355.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:55.740Z,1528908355.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:55.767Z,1528908355.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:56.135Z,1528908356.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:56.162Z,1528908356.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:56.560Z,1528908356.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:56.584Z,1528908356.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:56.959Z,1528908356.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:56.977Z,1528908356.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:57.351Z,1528908357.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:57.369Z,1528908357.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:57.739Z,1528908357.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:57.767Z,1528908357.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:58.139Z,1528908358.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:58.176Z,1528908358.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:58.539Z,1528908358.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:58.572Z,1528908358.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:45:58.951Z,1528908358.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:45:58.968Z,1528908358.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:02.055Z,1528908362.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:02.073Z,1528908362.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:02.077Z,1528908362.077 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T16:41:01.8Z
2018-06-13T16:46:02.077Z,1528908362.077 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T16:46:02.077Z,1528908362.077 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T16:46:02.193Z,1528908362.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:02.244Z,1528908362.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:03.366Z,1528908363.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:03.384Z,1528908363.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:03.512Z,1528908363.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:03.556Z,1528908363.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:03.895Z,1528908363.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:03.928Z,1528908363.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:04.306Z,1528908364.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:04.324Z,1528908364.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:04.696Z,1528908364.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:04.727Z,1528908364.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:05.104Z,1528908365.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:05.128Z,1528908365.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:05.519Z,1528908365.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:05.537Z,1528908365.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:05.918Z,1528908365.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:05.936Z,1528908365.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:06.315Z,1528908366.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:06.332Z,1528908366.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:06.705Z,1528908366.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:06.728Z,1528908366.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:09.834Z,1528908369.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:09.866Z,1528908369.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:09.957Z,1528908369.957 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0308.lzma
2018-06-13T16:46:09.993Z,1528908369.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:10.044Z,1528908370.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:10.406Z,1528908370.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:10.428Z,1528908370.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.384993 seconds old.
2018-06-13T16:46:10.429Z,1528908370.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:10.430Z,1528908370.430 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.385594 seconds old.
2018-06-13T16:46:10.431Z,1528908370.431 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.370943 seconds old.
2018-06-13T16:46:10.758Z,1528908370.758 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0308.lzma.bak
2018-06-13T16:46:10.758Z,1528908370.758 [DataOverHttps](INFO): SBD MOMSN=8329563
2018-06-13T16:46:10.815Z,1528908370.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:10.858Z,1528908370.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.815063 seconds old.
2018-06-13T16:46:10.859Z,1528908370.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:10.860Z,1528908370.860 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.815403 seconds old.
2018-06-13T16:46:10.861Z,1528908370.861 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.800969 seconds old.
2018-06-13T16:46:12.730Z,1528908372.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:12.775Z,1528908372.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:12.882Z,1528908372.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:12.916Z,1528908372.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:13.308Z,1528908373.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:13.326Z,1528908373.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:13.712Z,1528908373.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:13.730Z,1528908373.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:14.097Z,1528908374.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:14.131Z,1528908374.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:17.284Z,1528908377.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:17.326Z,1528908377.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:17.434Z,1528908377.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:17.480Z,1528908377.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:17.857Z,1528908377.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:17.875Z,1528908377.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:18.266Z,1528908378.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:18.283Z,1528908378.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:18.646Z,1528908378.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:18.684Z,1528908378.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:19.036Z,1528908379.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:19.076Z,1528908379.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:19.443Z,1528908379.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:19.462Z,1528908379.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:19.839Z,1528908379.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:19.857Z,1528908379.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:20.244Z,1528908380.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:20.262Z,1528908380.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:20.650Z,1528908380.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:20.668Z,1528908380.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:21.058Z,1528908381.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:21.098Z,1528908381.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:21.454Z,1528908381.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:21.472Z,1528908381.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:21.838Z,1528908381.838 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:21.886Z,1528908381.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:22.236Z,1528908382.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:22.255Z,1528908382.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:22.656Z,1528908382.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:22.844Z,1528908382.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:26.366Z,1528908386.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:26.384Z,1528908386.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:26.505Z,1528908386.505 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0309.lzma
2018-06-13T16:46:26.538Z,1528908386.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:26.564Z,1528908386.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:26.948Z,1528908386.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:26.966Z,1528908386.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:27.306Z,1528908387.306 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0309.lzma.bak
2018-06-13T16:46:27.306Z,1528908387.306 [DataOverHttps](INFO): SBD MOMSN=8329565
2018-06-13T16:46:27.362Z,1528908387.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:27.379Z,1528908387.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:29.306Z,1528908389.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:29.324Z,1528908389.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:29.328Z,1528908389.328 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T16:46:29.328Z,1528908389.328 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T16:46:29.328Z,1528908389.328 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T16:46:29.431Z,1528908389.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:29.468Z,1528908389.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:29.840Z,1528908389.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:29.868Z,1528908389.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:32.956Z,1528908392.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:32.974Z,1528908392.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:33.085Z,1528908393.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:33.129Z,1528908393.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:33.492Z,1528908393.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:33.520Z,1528908393.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:33.889Z,1528908393.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:33.923Z,1528908393.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:34.275Z,1528908394.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:34.314Z,1528908394.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:34.671Z,1528908394.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:34.716Z,1528908394.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:35.076Z,1528908395.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:35.094Z,1528908395.094 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:35.094Z,1528908395.094 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 266
2018-06-13T16:46:35.094Z,1528908395.094 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:46:35.095Z,1528908395.095 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:35.096Z,1528908395.096 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 266
2018-06-13T16:46:35.096Z,1528908395.096 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:46:35.114Z,1528908395.114 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:35.114Z,1528908395.114 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 266
2018-06-13T16:46:35.114Z,1528908395.114 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:46:35.193Z,1528908395.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:46:35.193Z,1528908395.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:46:35.194Z,1528908395.194 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:46:35.475Z,1528908395.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:35.569Z,1528908395.569 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:46:35.569Z,1528908395.569 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 266
2018-06-13T16:46:35.570Z,1528908395.570 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:46:35.570Z,1528908395.570 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 266
2018-06-13T16:46:35.570Z,1528908395.570 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:46:35.570Z,1528908395.570 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 266
2018-06-13T16:46:35.893Z,1528908395.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:35.922Z,1528908395.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:46:35.922Z,1528908395.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:46:35.922Z,1528908395.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:46:35.923Z,1528908395.923 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:46:35.923Z,1528908395.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:46:35.923Z,1528908395.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:46:35.924Z,1528908395.924 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:46:35.924Z,1528908395.924 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:46:35.924Z,1528908395.924 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:46:36.293Z,1528908396.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:36.325Z,1528908396.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:46:36.326Z,1528908396.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:36.689Z,1528908396.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:36.723Z,1528908396.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:46:36.724Z,1528908396.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:37.078Z,1528908397.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:37.096Z,1528908397.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:46:37.097Z,1528908397.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:37.475Z,1528908397.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:37.497Z,1528908397.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:46:37.498Z,1528908397.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:37.881Z,1528908397.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:37.898Z,1528908397.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:46:37.899Z,1528908397.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:38.280Z,1528908398.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:38.310Z,1528908398.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:46:38.311Z,1528908398.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:38.686Z,1528908398.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:38.704Z,1528908398.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:46:38.705Z,1528908398.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:39.090Z,1528908399.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:39.112Z,1528908399.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:46:39.113Z,1528908399.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:39.491Z,1528908399.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:39.508Z,1528908399.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:46:39.509Z,1528908399.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:39.881Z,1528908399.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:39.899Z,1528908399.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:46:39.900Z,1528908399.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:40.281Z,1528908400.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:40.298Z,1528908400.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:46:40.299Z,1528908400.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:40.679Z,1528908400.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:40.697Z,1528908400.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:46:40.698Z,1528908400.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:41.075Z,1528908401.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:41.098Z,1528908401.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:46:41.099Z,1528908401.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:41.481Z,1528908401.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:41.504Z,1528908401.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:46:41.505Z,1528908401.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:41.890Z,1528908401.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:41.908Z,1528908401.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:46:41.909Z,1528908401.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:42.290Z,1528908402.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:42.307Z,1528908402.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:46:42.308Z,1528908402.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:42.691Z,1528908402.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:42.709Z,1528908402.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:46:42.710Z,1528908402.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:43.082Z,1528908403.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:43.099Z,1528908403.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:46:43.100Z,1528908403.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:43.475Z,1528908403.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:43.498Z,1528908403.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:46:43.499Z,1528908403.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:43.881Z,1528908403.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:43.899Z,1528908403.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:46:43.900Z,1528908403.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:44.282Z,1528908404.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:44.299Z,1528908404.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:46:44.300Z,1528908404.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:44.688Z,1528908404.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:44.706Z,1528908404.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:46:44.707Z,1528908404.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:45.090Z,1528908405.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:45.112Z,1528908405.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:46:45.113Z,1528908405.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:45.491Z,1528908405.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:45.508Z,1528908405.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:46:45.509Z,1528908405.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:45.875Z,1528908405.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:45.898Z,1528908405.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:46:45.899Z,1528908405.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:46.281Z,1528908406.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:46.298Z,1528908406.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:46:46.299Z,1528908406.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:46.682Z,1528908406.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:46.699Z,1528908406.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:46:46.700Z,1528908406.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:47.075Z,1528908407.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:47.098Z,1528908407.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:46:47.099Z,1528908407.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:47.482Z,1528908407.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:47.499Z,1528908407.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:46:47.500Z,1528908407.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:47.891Z,1528908407.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:47.908Z,1528908407.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:46:47.909Z,1528908407.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:48.290Z,1528908408.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:48.312Z,1528908408.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:46:48.313Z,1528908408.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:48.690Z,1528908408.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:48.708Z,1528908408.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:46:48.708Z,1528908408.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:49.082Z,1528908409.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:49.099Z,1528908409.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:46:49.100Z,1528908409.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:49.475Z,1528908409.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:49.499Z,1528908409.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:46:49.500Z,1528908409.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:49.881Z,1528908409.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:49.899Z,1528908409.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:46:49.900Z,1528908409.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:50.283Z,1528908410.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:50.300Z,1528908410.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:46:50.301Z,1528908410.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:50.690Z,1528908410.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:50.707Z,1528908410.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:46:50.708Z,1528908410.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:51.090Z,1528908411.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:51.112Z,1528908411.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:46:51.113Z,1528908411.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:51.491Z,1528908411.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:51.509Z,1528908411.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:46:51.510Z,1528908411.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:51.881Z,1528908411.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:51.898Z,1528908411.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:46:51.899Z,1528908411.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:52.282Z,1528908412.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:52.299Z,1528908412.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:46:52.300Z,1528908412.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:52.682Z,1528908412.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:52.699Z,1528908412.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:46:52.700Z,1528908412.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:53.075Z,1528908413.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:53.098Z,1528908413.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:46:53.099Z,1528908413.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:53.481Z,1528908413.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:53.498Z,1528908413.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:46:53.499Z,1528908413.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:53.891Z,1528908413.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:53.908Z,1528908413.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:46:53.909Z,1528908413.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:54.290Z,1528908414.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:54.308Z,1528908414.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:46:54.309Z,1528908414.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:54.690Z,1528908414.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:54.707Z,1528908414.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T16:46:54.708Z,1528908414.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:55.082Z,1528908415.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:55.105Z,1528908415.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:55.475Z,1528908415.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:55.498Z,1528908415.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:55.882Z,1528908415.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:55.899Z,1528908415.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:56.274Z,1528908416.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:56.312Z,1528908416.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:56.691Z,1528908416.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:56.709Z,1528908416.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:57.092Z,1528908417.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:57.109Z,1528908417.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:57.492Z,1528908417.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:57.510Z,1528908417.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:57.882Z,1528908417.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:57.900Z,1528908417.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:58.282Z,1528908418.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:58.300Z,1528908418.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:58.683Z,1528908418.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:58.708Z,1528908418.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:59.085Z,1528908419.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:59.103Z,1528908419.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:59.482Z,1528908419.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:59.504Z,1528908419.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:46:59.897Z,1528908419.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:46:59.915Z,1528908419.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:00.293Z,1528908420.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:00.311Z,1528908420.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:00.692Z,1528908420.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:00.710Z,1528908420.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:01.082Z,1528908421.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:01.107Z,1528908421.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:01.472Z,1528908421.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:01.600Z,1528908421.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:01.889Z,1528908421.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:01.988Z,1528908421.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:02.280Z,1528908422.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:02.299Z,1528908422.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:02.682Z,1528908422.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:02.887Z,1528908422.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:03.106Z,1528908423.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:03.195Z,1528908423.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:03.489Z,1528908423.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:03.593Z,1528908423.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:03.872Z,1528908423.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:03.899Z,1528908423.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:04.275Z,1528908424.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:04.312Z,1528908424.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:04.675Z,1528908424.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:04.710Z,1528908424.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:05.076Z,1528908425.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:05.110Z,1528908425.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:05.475Z,1528908425.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:05.492Z,1528908425.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:05.890Z,1528908425.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:05.924Z,1528908425.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:06.293Z,1528908426.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:06.321Z,1528908426.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:06.689Z,1528908426.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:06.764Z,1528908426.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:07.079Z,1528908427.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:07.097Z,1528908427.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:07.474Z,1528908427.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:07.492Z,1528908427.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:07.878Z,1528908427.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:07.896Z,1528908427.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:08.278Z,1528908428.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:08.296Z,1528908428.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:08.686Z,1528908428.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:08.704Z,1528908428.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:09.089Z,1528908429.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:09.107Z,1528908429.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:09.489Z,1528908429.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:09.508Z,1528908429.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:09.880Z,1528908429.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:09.904Z,1528908429.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:10.279Z,1528908430.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:10.297Z,1528908430.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:10.682Z,1528908430.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:10.704Z,1528908430.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:11.077Z,1528908431.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:11.095Z,1528908431.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:11.480Z,1528908431.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:11.498Z,1528908431.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:11.889Z,1528908431.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:11.907Z,1528908431.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:12.285Z,1528908432.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:12.303Z,1528908432.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:12.685Z,1528908432.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:12.704Z,1528908432.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:13.081Z,1528908433.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:13.099Z,1528908433.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:13.482Z,1528908433.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:13.500Z,1528908433.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:13.880Z,1528908433.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:13.898Z,1528908433.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:14.281Z,1528908434.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:14.299Z,1528908434.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:14.684Z,1528908434.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:14.721Z,1528908434.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:15.090Z,1528908435.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:15.112Z,1528908435.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:15.492Z,1528908435.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:15.510Z,1528908435.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:15.881Z,1528908435.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:15.899Z,1528908435.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:16.281Z,1528908436.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:16.299Z,1528908436.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:16.682Z,1528908436.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:16.700Z,1528908436.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:17.073Z,1528908437.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:17.098Z,1528908437.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:17.481Z,1528908437.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:17.499Z,1528908437.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:17.891Z,1528908437.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:17.909Z,1528908437.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:18.289Z,1528908438.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:18.308Z,1528908438.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:18.690Z,1528908438.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:18.708Z,1528908438.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:19.082Z,1528908439.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:19.100Z,1528908439.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:19.475Z,1528908439.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:19.498Z,1528908439.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:19.881Z,1528908439.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:19.899Z,1528908439.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:20.283Z,1528908440.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:20.301Z,1528908440.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:20.687Z,1528908440.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:20.705Z,1528908440.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:21.090Z,1528908441.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:21.112Z,1528908441.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:21.491Z,1528908441.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:21.509Z,1528908441.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:21.875Z,1528908441.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:21.898Z,1528908441.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:22.282Z,1528908442.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:22.299Z,1528908442.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:22.682Z,1528908442.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:22.700Z,1528908442.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:23.075Z,1528908443.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:23.099Z,1528908443.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:23.481Z,1528908443.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:23.498Z,1528908443.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:23.890Z,1528908443.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:23.909Z,1528908443.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:24.290Z,1528908444.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:24.316Z,1528908444.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:24.690Z,1528908444.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:24.708Z,1528908444.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:25.083Z,1528908445.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:25.101Z,1528908445.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:25.475Z,1528908445.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:25.498Z,1528908445.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:25.881Z,1528908445.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:25.899Z,1528908445.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:26.282Z,1528908446.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:26.300Z,1528908446.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:26.690Z,1528908446.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:26.712Z,1528908446.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:27.091Z,1528908447.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:27.108Z,1528908447.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:27.491Z,1528908447.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:27.508Z,1528908447.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:27.875Z,1528908447.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:27.898Z,1528908447.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:28.280Z,1528908448.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:28.299Z,1528908448.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:28.682Z,1528908448.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:28.700Z,1528908448.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:29.075Z,1528908449.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:29.099Z,1528908449.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:29.481Z,1528908449.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:29.498Z,1528908449.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:29.893Z,1528908449.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:29.912Z,1528908449.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:30.290Z,1528908450.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:30.312Z,1528908450.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:30.690Z,1528908450.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:30.708Z,1528908450.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:31.082Z,1528908451.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:31.100Z,1528908451.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:31.481Z,1528908451.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:31.504Z,1528908451.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:31.882Z,1528908451.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:31.904Z,1528908451.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:32.282Z,1528908452.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:32.300Z,1528908452.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:32.689Z,1528908452.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:32.715Z,1528908452.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:35.794Z,1528908455.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:35.814Z,1528908455.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:35.961Z,1528908455.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:36.004Z,1528908456.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:36.346Z,1528908456.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:36.364Z,1528908456.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:36.746Z,1528908456.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:36.764Z,1528908456.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:37.146Z,1528908457.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:37.165Z,1528908457.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:37.546Z,1528908457.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:37.564Z,1528908457.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:37.957Z,1528908457.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:37.991Z,1528908457.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:38.357Z,1528908458.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:38.390Z,1528908458.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:38.757Z,1528908458.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:38.790Z,1528908458.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:39.142Z,1528908459.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:39.164Z,1528908459.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:39.546Z,1528908459.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:39.564Z,1528908459.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:39.948Z,1528908459.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:39.965Z,1528908459.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:40.342Z,1528908460.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:40.360Z,1528908460.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:40.757Z,1528908460.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:40.790Z,1528908460.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:41.157Z,1528908461.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:41.190Z,1528908461.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:41.553Z,1528908461.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:41.593Z,1528908461.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:41.946Z,1528908461.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:41.988Z,1528908461.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:42.346Z,1528908462.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:42.368Z,1528908462.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:42.742Z,1528908462.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:42.760Z,1528908462.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:43.147Z,1528908463.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:43.165Z,1528908463.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:43.546Z,1528908463.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:43.564Z,1528908463.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:43.953Z,1528908463.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:43.972Z,1528908463.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:44.361Z,1528908464.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:44.395Z,1528908464.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:44.758Z,1528908464.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:44.775Z,1528908464.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:45.147Z,1528908465.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:45.165Z,1528908465.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:45.549Z,1528908465.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:45.567Z,1528908465.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:45.948Z,1528908465.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:45.973Z,1528908465.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:46.347Z,1528908466.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:46.364Z,1528908466.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:46.759Z,1528908466.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:46.777Z,1528908466.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:47.157Z,1528908467.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:47.180Z,1528908467.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:47.557Z,1528908467.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:47.580Z,1528908467.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:47.953Z,1528908467.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:47.971Z,1528908467.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:48.353Z,1528908468.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:48.371Z,1528908468.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:48.747Z,1528908468.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:48.766Z,1528908468.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:49.147Z,1528908469.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:49.165Z,1528908469.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:49.553Z,1528908469.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:49.576Z,1528908469.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:49.958Z,1528908469.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:49.976Z,1528908469.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:50.355Z,1528908470.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:50.373Z,1528908470.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:50.755Z,1528908470.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:50.773Z,1528908470.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:51.146Z,1528908471.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:51.164Z,1528908471.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:51.542Z,1528908471.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:51.577Z,1528908471.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:51.947Z,1528908471.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:51.970Z,1528908471.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:52.350Z,1528908472.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:52.368Z,1528908472.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:52.755Z,1528908472.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:52.773Z,1528908472.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:53.158Z,1528908473.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:53.181Z,1528908473.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:53.559Z,1528908473.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:53.578Z,1528908473.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:53.939Z,1528908473.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:53.975Z,1528908473.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:54.349Z,1528908474.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:54.367Z,1528908474.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:54.749Z,1528908474.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:54.767Z,1528908474.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:55.140Z,1528908475.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:55.171Z,1528908475.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:55.547Z,1528908475.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:55.582Z,1528908475.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:55.959Z,1528908475.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:55.977Z,1528908475.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:56.360Z,1528908476.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:56.378Z,1528908476.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:56.759Z,1528908476.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:56.777Z,1528908476.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:57.143Z,1528908477.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:57.171Z,1528908477.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:57.539Z,1528908477.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:57.567Z,1528908477.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:57.942Z,1528908477.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:57.970Z,1528908477.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:58.339Z,1528908478.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:58.377Z,1528908478.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:58.755Z,1528908478.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:58.773Z,1528908478.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:59.163Z,1528908479.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:59.181Z,1528908479.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:59.564Z,1528908479.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:59.581Z,1528908479.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:47:59.939Z,1528908479.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:47:59.966Z,1528908479.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:00.343Z,1528908480.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:00.371Z,1528908480.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:00.743Z,1528908480.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:00.771Z,1528908480.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:01.141Z,1528908481.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:01.175Z,1528908481.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:01.543Z,1528908481.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:01.580Z,1528908481.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:01.927Z,1528908481.927 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T16:48:01.927Z,1528908481.927 [NAL9602] Data Fault, FailCount= 3
2018-06-13T16:48:01.927Z,1528908481.927 [NAL9602](ERROR): Data Fault
2018-06-13T16:48:01.943Z,1528908481.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:01.992Z,1528908481.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:02.077Z,1528908482.077 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T16:48:02.322Z,1528908482.322 [NAL9602](INFO): Powering down
2018-06-13T16:48:02.340Z,1528908482.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:02.383Z,1528908482.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:02.743Z,1528908482.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:02.773Z,1528908482.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:03.139Z,1528908483.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:03.157Z,1528908483.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:03.257Z,1528908483.257 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T16:48:03.257Z,1528908483.257 [NAL9602] No Fault, FailCount= 3
2018-06-13T16:48:03.538Z,1528908483.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:03.556Z,1528908483.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:03.943Z,1528908483.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:03.960Z,1528908483.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:04.338Z,1528908484.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:04.360Z,1528908484.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:04.738Z,1528908484.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:04.756Z,1528908484.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:05.143Z,1528908485.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:05.160Z,1528908485.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:05.542Z,1528908485.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:05.560Z,1528908485.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:05.942Z,1528908485.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:05.960Z,1528908485.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:06.347Z,1528908486.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:06.364Z,1528908486.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:06.742Z,1528908486.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:06.759Z,1528908486.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:07.141Z,1528908487.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:07.159Z,1528908487.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:07.546Z,1528908487.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:07.564Z,1528908487.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:07.942Z,1528908487.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:07.960Z,1528908487.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:08.345Z,1528908488.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:08.363Z,1528908488.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:08.746Z,1528908488.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:08.764Z,1528908488.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:09.141Z,1528908489.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:09.159Z,1528908489.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:09.542Z,1528908489.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:09.559Z,1528908489.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:09.946Z,1528908489.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:09.964Z,1528908489.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:10.341Z,1528908490.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:10.359Z,1528908490.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:10.742Z,1528908490.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:10.760Z,1528908490.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:11.146Z,1528908491.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:11.164Z,1528908491.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:11.545Z,1528908491.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:11.563Z,1528908491.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:11.941Z,1528908491.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:11.959Z,1528908491.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:12.346Z,1528908492.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:12.363Z,1528908492.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:12.742Z,1528908492.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:12.764Z,1528908492.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:13.145Z,1528908493.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:13.163Z,1528908493.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:13.546Z,1528908493.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:13.564Z,1528908493.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:13.941Z,1528908493.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:13.959Z,1528908493.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:14.341Z,1528908494.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:14.359Z,1528908494.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:14.747Z,1528908494.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:14.764Z,1528908494.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:15.141Z,1528908495.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:15.159Z,1528908495.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:15.542Z,1528908495.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:15.559Z,1528908495.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:15.946Z,1528908495.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:15.963Z,1528908495.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:16.341Z,1528908496.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:16.359Z,1528908496.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:16.741Z,1528908496.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:16.760Z,1528908496.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:17.146Z,1528908497.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:17.164Z,1528908497.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:17.542Z,1528908497.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:17.559Z,1528908497.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:17.942Z,1528908497.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:17.960Z,1528908497.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:18.346Z,1528908498.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:18.364Z,1528908498.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:18.742Z,1528908498.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:18.764Z,1528908498.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:19.142Z,1528908499.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:19.160Z,1528908499.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:19.547Z,1528908499.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:19.565Z,1528908499.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:19.944Z,1528908499.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:19.961Z,1528908499.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:20.344Z,1528908500.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:20.362Z,1528908500.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:20.746Z,1528908500.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:20.764Z,1528908500.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:21.144Z,1528908501.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:21.161Z,1528908501.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:21.544Z,1528908501.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:21.563Z,1528908501.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:21.946Z,1528908501.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:21.964Z,1528908501.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:22.346Z,1528908502.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:22.368Z,1528908502.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:22.746Z,1528908502.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:22.764Z,1528908502.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:23.146Z,1528908503.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:23.164Z,1528908503.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:23.544Z,1528908503.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:23.562Z,1528908503.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:23.946Z,1528908503.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:23.964Z,1528908503.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:24.347Z,1528908504.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:24.366Z,1528908504.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:24.744Z,1528908504.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:24.762Z,1528908504.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:25.145Z,1528908505.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:25.163Z,1528908505.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:25.547Z,1528908505.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:25.570Z,1528908505.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:25.944Z,1528908505.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:25.962Z,1528908505.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:26.345Z,1528908506.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:26.368Z,1528908506.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:26.747Z,1528908506.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:26.769Z,1528908506.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:27.146Z,1528908507.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:27.163Z,1528908507.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:27.546Z,1528908507.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:27.564Z,1528908507.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:27.949Z,1528908507.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:27.967Z,1528908507.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:28.349Z,1528908508.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:28.367Z,1528908508.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:28.750Z,1528908508.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:28.768Z,1528908508.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:29.149Z,1528908509.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:29.167Z,1528908509.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:29.549Z,1528908509.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:29.566Z,1528908509.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:29.948Z,1528908509.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:29.967Z,1528908509.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:33.052Z,1528908513.052 [NAL9602](INFO): Powering up NAL9602
2018-06-13T16:48:33.070Z,1528908513.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:33.100Z,1528908513.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:33.213Z,1528908513.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:33.262Z,1528908513.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:33.622Z,1528908513.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:33.651Z,1528908513.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:34.023Z,1528908514.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:34.052Z,1528908514.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:34.423Z,1528908514.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:34.451Z,1528908514.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:34.819Z,1528908514.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:34.852Z,1528908514.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:35.215Z,1528908515.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:35.241Z,1528908515.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:35.615Z,1528908515.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:35.641Z,1528908515.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:36.019Z,1528908516.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:36.046Z,1528908516.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:36.414Z,1528908516.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:36.437Z,1528908516.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:36.818Z,1528908516.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:36.837Z,1528908516.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:37.221Z,1528908517.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:37.264Z,1528908517.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:37.621Z,1528908517.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:37.644Z,1528908517.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:38.019Z,1528908518.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:38.038Z,1528908518.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:38.422Z,1528908518.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:38.440Z,1528908518.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:38.819Z,1528908518.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:38.844Z,1528908518.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:39.220Z,1528908519.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:39.238Z,1528908519.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:39.622Z,1528908519.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:39.639Z,1528908519.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:40.019Z,1528908520.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:40.044Z,1528908520.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:40.419Z,1528908520.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:40.437Z,1528908520.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:40.822Z,1528908520.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:40.840Z,1528908520.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:41.219Z,1528908521.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:41.238Z,1528908521.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:41.619Z,1528908521.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:41.638Z,1528908521.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:42.022Z,1528908522.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:42.040Z,1528908522.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:42.419Z,1528908522.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:42.437Z,1528908522.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:42.819Z,1528908522.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:42.838Z,1528908522.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:43.222Z,1528908523.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:43.240Z,1528908523.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:43.626Z,1528908523.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:43.644Z,1528908523.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:43.999Z,1528908523.999 [NAL9602](INFO): NAL9602 initialized
2018-06-13T16:48:44.024Z,1528908524.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:44.042Z,1528908524.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:44.422Z,1528908524.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:44.440Z,1528908524.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:44.825Z,1528908524.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:44.844Z,1528908524.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:45.233Z,1528908525.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:45.251Z,1528908525.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:45.634Z,1528908525.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:45.651Z,1528908525.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:46.025Z,1528908526.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:46.043Z,1528908526.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:46.423Z,1528908526.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:46.442Z,1528908526.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:46.825Z,1528908526.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:46.843Z,1528908526.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:47.222Z,1528908527.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:47.240Z,1528908527.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:47.623Z,1528908527.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:47.642Z,1528908527.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:48.034Z,1528908528.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:48.052Z,1528908528.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:48.433Z,1528908528.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:48.451Z,1528908528.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:48.829Z,1528908528.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:48.852Z,1528908528.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:49.225Z,1528908529.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:49.243Z,1528908529.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:49.619Z,1528908529.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:49.651Z,1528908529.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:50.024Z,1528908530.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:50.042Z,1528908530.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:50.425Z,1528908530.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:50.443Z,1528908530.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:50.827Z,1528908530.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:50.846Z,1528908530.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:51.233Z,1528908531.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:51.251Z,1528908531.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:51.634Z,1528908531.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:51.651Z,1528908531.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:52.024Z,1528908532.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:52.048Z,1528908532.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:52.424Z,1528908532.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:52.442Z,1528908532.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:52.826Z,1528908532.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:52.844Z,1528908532.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:53.222Z,1528908533.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:53.240Z,1528908533.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:53.623Z,1528908533.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:53.648Z,1528908533.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:54.034Z,1528908534.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:54.051Z,1528908534.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:54.429Z,1528908534.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:54.452Z,1528908534.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:54.829Z,1528908534.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:54.849Z,1528908534.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:55.224Z,1528908535.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:55.246Z,1528908535.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:55.622Z,1528908535.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:55.640Z,1528908535.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:56.025Z,1528908536.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:56.043Z,1528908536.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:56.423Z,1528908536.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:56.457Z,1528908536.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:56.831Z,1528908536.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:56.856Z,1528908536.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:57.234Z,1528908537.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:57.256Z,1528908537.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:57.636Z,1528908537.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:57.654Z,1528908537.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:58.019Z,1528908538.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:58.043Z,1528908538.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:58.425Z,1528908538.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:58.443Z,1528908538.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:58.826Z,1528908538.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:58.844Z,1528908538.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:59.219Z,1528908539.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:59.244Z,1528908539.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:48:59.623Z,1528908539.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:48:59.646Z,1528908539.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:00.035Z,1528908540.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:00.060Z,1528908540.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:00.434Z,1528908540.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:00.452Z,1528908540.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:00.834Z,1528908540.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:00.852Z,1528908540.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:01.226Z,1528908541.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:01.248Z,1528908541.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:01.619Z,1528908541.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:01.643Z,1528908541.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:02.026Z,1528908542.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:02.044Z,1528908542.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:02.423Z,1528908542.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:02.449Z,1528908542.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:02.831Z,1528908542.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:02.850Z,1528908542.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:03.239Z,1528908543.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:03.264Z,1528908543.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:03.639Z,1528908543.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:03.657Z,1528908543.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:04.015Z,1528908544.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:04.052Z,1528908544.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:04.424Z,1528908544.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:04.448Z,1528908544.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:04.826Z,1528908544.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:04.844Z,1528908544.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:05.215Z,1528908545.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:05.250Z,1528908545.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:05.619Z,1528908545.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:05.646Z,1528908545.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:06.041Z,1528908546.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:06.059Z,1528908546.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:06.434Z,1528908546.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:06.453Z,1528908546.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:06.836Z,1528908546.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:06.854Z,1528908546.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:07.220Z,1528908547.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:07.249Z,1528908547.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:07.623Z,1528908547.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:07.651Z,1528908547.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:08.016Z,1528908548.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:08.051Z,1528908548.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:08.419Z,1528908548.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:08.454Z,1528908548.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:08.826Z,1528908548.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:08.854Z,1528908548.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:09.241Z,1528908549.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:09.259Z,1528908549.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:09.638Z,1528908549.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:09.664Z,1528908549.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:10.015Z,1528908550.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:10.034Z,1528908550.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:10.419Z,1528908550.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:10.438Z,1528908550.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:10.823Z,1528908550.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:10.842Z,1528908550.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:11.219Z,1528908551.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:11.239Z,1528908551.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:11.622Z,1528908551.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:11.641Z,1528908551.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:12.037Z,1528908552.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:12.074Z,1528908552.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:12.436Z,1528908552.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:12.478Z,1528908552.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:12.834Z,1528908552.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:12.852Z,1528908552.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:13.226Z,1528908553.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:13.244Z,1528908553.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:13.626Z,1528908553.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:13.644Z,1528908553.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:14.023Z,1528908554.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:14.041Z,1528908554.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:14.426Z,1528908554.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:14.444Z,1528908554.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:14.827Z,1528908554.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:14.852Z,1528908554.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:15.234Z,1528908555.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:15.252Z,1528908555.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:15.634Z,1528908555.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:15.675Z,1528908555.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:16.023Z,1528908556.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:16.058Z,1528908556.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:16.421Z,1528908556.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:16.440Z,1528908556.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:16.826Z,1528908556.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:16.845Z,1528908556.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:17.224Z,1528908557.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:17.244Z,1528908557.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:17.615Z,1528908557.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:17.653Z,1528908557.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:18.040Z,1528908558.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:18.064Z,1528908558.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:18.439Z,1528908558.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:18.458Z,1528908558.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:18.832Z,1528908558.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:18.850Z,1528908558.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:19.219Z,1528908559.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:19.247Z,1528908559.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:19.615Z,1528908559.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:19.648Z,1528908559.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:20.019Z,1528908560.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:20.047Z,1528908560.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:20.419Z,1528908560.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:20.455Z,1528908560.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:20.836Z,1528908560.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:20.855Z,1528908560.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:21.235Z,1528908561.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:21.253Z,1528908561.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:21.633Z,1528908561.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:21.671Z,1528908561.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:22.015Z,1528908562.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:22.048Z,1528908562.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:22.415Z,1528908562.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:22.441Z,1528908562.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:22.819Z,1528908562.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:22.849Z,1528908562.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:23.216Z,1528908563.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:23.234Z,1528908563.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:23.616Z,1528908563.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:23.634Z,1528908563.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:24.033Z,1528908564.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:24.061Z,1528908564.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:24.433Z,1528908564.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:24.461Z,1528908564.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:24.829Z,1528908564.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:24.864Z,1528908564.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:25.219Z,1528908565.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:25.237Z,1528908565.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:25.620Z,1528908565.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:25.656Z,1528908565.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:26.022Z,1528908566.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:26.040Z,1528908566.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:26.422Z,1528908566.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:26.440Z,1528908566.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:26.833Z,1528908566.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:26.868Z,1528908566.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:27.229Z,1528908567.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:27.247Z,1528908567.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:27.634Z,1528908567.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:27.652Z,1528908567.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:28.024Z,1528908568.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:28.043Z,1528908568.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:28.421Z,1528908568.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:28.439Z,1528908568.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:28.825Z,1528908568.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:28.843Z,1528908568.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:29.229Z,1528908569.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:29.278Z,1528908569.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:29.623Z,1528908569.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:29.642Z,1528908569.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:30.038Z,1528908570.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:30.055Z,1528908570.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:33.143Z,1528908573.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:33.185Z,1528908573.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:33.322Z,1528908573.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:33.356Z,1528908573.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:33.700Z,1528908573.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:33.734Z,1528908573.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:34.104Z,1528908574.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:34.143Z,1528908574.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:34.495Z,1528908574.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:34.513Z,1528908574.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:34.913Z,1528908574.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:34.942Z,1528908574.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:35.313Z,1528908575.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:35.341Z,1528908575.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:35.706Z,1528908575.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:35.739Z,1528908575.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:36.103Z,1528908576.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:36.121Z,1528908576.121 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:36.121Z,1528908576.121 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 267
2018-06-13T16:49:36.121Z,1528908576.121 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:49:36.123Z,1528908576.123 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:36.123Z,1528908576.123 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 267
2018-06-13T16:49:36.123Z,1528908576.123 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:49:36.141Z,1528908576.141 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:36.141Z,1528908576.141 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 267
2018-06-13T16:49:36.141Z,1528908576.141 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:49:36.221Z,1528908576.221 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:49:36.221Z,1528908576.221 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:49:36.222Z,1528908576.222 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:49:36.502Z,1528908576.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:36.613Z,1528908576.613 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:49:36.613Z,1528908576.613 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 267
2018-06-13T16:49:36.614Z,1528908576.614 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:49:36.614Z,1528908576.614 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 267
2018-06-13T16:49:36.614Z,1528908576.614 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:49:36.614Z,1528908576.614 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 267
2018-06-13T16:49:36.900Z,1528908576.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:36.917Z,1528908576.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:49:36.918Z,1528908576.918 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:49:36.918Z,1528908576.918 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:49:36.918Z,1528908576.918 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:49:36.919Z,1528908576.919 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:49:36.919Z,1528908576.919 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:49:36.919Z,1528908576.919 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:49:36.920Z,1528908576.920 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:49:36.920Z,1528908576.920 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:49:37.300Z,1528908577.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:37.335Z,1528908577.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:49:37.336Z,1528908577.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:37.699Z,1528908577.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:37.735Z,1528908577.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:49:37.736Z,1528908577.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:38.111Z,1528908578.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:38.128Z,1528908578.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:49:38.130Z,1528908578.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:38.520Z,1528908578.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:38.538Z,1528908578.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:49:38.539Z,1528908578.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:38.915Z,1528908578.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:38.933Z,1528908578.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:49:38.934Z,1528908578.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:39.295Z,1528908579.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:39.324Z,1528908579.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:49:39.330Z,1528908579.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:39.699Z,1528908579.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:39.737Z,1528908579.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:49:39.738Z,1528908579.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:40.095Z,1528908580.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:40.129Z,1528908580.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:49:40.130Z,1528908580.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:40.495Z,1528908580.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:40.513Z,1528908580.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:49:40.514Z,1528908580.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:40.913Z,1528908580.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:40.941Z,1528908580.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:49:40.942Z,1528908580.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:41.313Z,1528908581.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:41.341Z,1528908581.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:49:41.342Z,1528908581.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:41.713Z,1528908581.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:41.745Z,1528908581.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:49:41.746Z,1528908581.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:42.102Z,1528908582.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:42.119Z,1528908582.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:49:42.120Z,1528908582.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:42.502Z,1528908582.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:42.520Z,1528908582.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:49:42.521Z,1528908582.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:42.897Z,1528908582.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:42.915Z,1528908582.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:49:42.916Z,1528908582.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:43.303Z,1528908583.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:43.328Z,1528908583.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:49:43.349Z,1528908583.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:43.702Z,1528908583.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:43.719Z,1528908583.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:49:43.720Z,1528908583.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:44.106Z,1528908584.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:44.124Z,1528908584.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:49:44.125Z,1528908584.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:44.513Z,1528908584.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:44.531Z,1528908584.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:49:44.532Z,1528908584.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:44.910Z,1528908584.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:44.927Z,1528908584.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:49:44.928Z,1528908584.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:45.301Z,1528908585.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:45.319Z,1528908585.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:49:45.320Z,1528908585.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:45.704Z,1528908585.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:45.722Z,1528908585.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:49:45.723Z,1528908585.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:46.104Z,1528908586.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:46.134Z,1528908586.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:49:46.135Z,1528908586.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:46.500Z,1528908586.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:46.518Z,1528908586.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:49:46.519Z,1528908586.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:46.914Z,1528908586.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:46.948Z,1528908586.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:49:46.951Z,1528908586.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:47.315Z,1528908587.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:47.333Z,1528908587.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:49:47.334Z,1528908587.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:47.712Z,1528908587.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:47.729Z,1528908587.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:49:47.730Z,1528908587.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:48.099Z,1528908588.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:48.133Z,1528908588.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:49:48.134Z,1528908588.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:48.495Z,1528908588.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:48.528Z,1528908588.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:49:48.533Z,1528908588.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:48.899Z,1528908588.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:48.936Z,1528908588.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:49:48.941Z,1528908588.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:49.300Z,1528908589.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:49.344Z,1528908589.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:49:49.349Z,1528908589.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:49.703Z,1528908589.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:49.720Z,1528908589.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:49:49.721Z,1528908589.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:50.109Z,1528908590.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:50.127Z,1528908590.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:49:50.128Z,1528908590.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:50.517Z,1528908590.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:50.550Z,1528908590.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:49:50.551Z,1528908590.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:50.906Z,1528908590.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:50.924Z,1528908590.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:49:50.925Z,1528908590.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:51.301Z,1528908591.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:51.318Z,1528908591.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:49:51.319Z,1528908591.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:51.706Z,1528908591.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:51.723Z,1528908591.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:49:51.724Z,1528908591.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:52.102Z,1528908592.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:52.120Z,1528908592.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:49:52.121Z,1528908592.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:52.501Z,1528908592.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:52.518Z,1528908592.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:49:52.519Z,1528908592.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:52.913Z,1528908592.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:52.931Z,1528908592.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:49:52.932Z,1528908592.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:53.314Z,1528908593.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:53.331Z,1528908593.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:49:53.332Z,1528908593.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:53.710Z,1528908593.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:53.728Z,1528908593.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:49:53.729Z,1528908593.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:54.107Z,1528908594.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:54.125Z,1528908594.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:49:54.126Z,1528908594.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:54.504Z,1528908594.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:54.528Z,1528908594.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:49:54.529Z,1528908594.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:54.902Z,1528908594.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:54.920Z,1528908594.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:49:54.920Z,1528908594.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:55.307Z,1528908595.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:55.324Z,1528908595.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:49:55.325Z,1528908595.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:55.703Z,1528908595.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:55.733Z,1528908595.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T16:49:55.734Z,1528908595.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:56.115Z,1528908596.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:56.137Z,1528908596.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:56.515Z,1528908596.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:56.533Z,1528908596.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:56.915Z,1528908596.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:56.940Z,1528908596.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:57.304Z,1528908597.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:57.323Z,1528908597.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:57.706Z,1528908597.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:57.724Z,1528908597.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:58.106Z,1528908598.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:58.124Z,1528908598.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:58.501Z,1528908598.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:58.523Z,1528908598.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:58.916Z,1528908598.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:58.935Z,1528908598.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:59.314Z,1528908599.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:59.332Z,1528908599.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:49:59.713Z,1528908599.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:49:59.730Z,1528908599.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:00.110Z,1528908600.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:00.132Z,1528908600.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:00.503Z,1528908600.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:00.528Z,1528908600.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:00.903Z,1528908600.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:00.921Z,1528908600.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:01.304Z,1528908601.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:01.334Z,1528908601.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:01.703Z,1528908601.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:01.728Z,1528908601.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:02.111Z,1528908602.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:02.129Z,1528908602.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:02.520Z,1528908602.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:02.544Z,1528908602.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:02.919Z,1528908602.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:02.937Z,1528908602.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:03.295Z,1528908603.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:03.329Z,1528908603.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:03.700Z,1528908603.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:03.735Z,1528908603.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:04.096Z,1528908604.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:04.132Z,1528908604.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:04.497Z,1528908604.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:04.532Z,1528908604.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:04.913Z,1528908604.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:04.948Z,1528908604.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:05.309Z,1528908605.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:05.338Z,1528908605.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:05.710Z,1528908605.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:05.737Z,1528908605.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:06.099Z,1528908606.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:06.133Z,1528908606.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:06.499Z,1528908606.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:06.517Z,1528908606.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:06.899Z,1528908606.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:06.916Z,1528908606.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:07.302Z,1528908607.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:07.320Z,1528908607.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:07.702Z,1528908607.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:07.720Z,1528908607.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:08.109Z,1528908608.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:08.127Z,1528908608.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:08.513Z,1528908608.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:08.531Z,1528908608.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:08.913Z,1528908608.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:08.931Z,1528908608.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:09.304Z,1528908609.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:09.322Z,1528908609.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:09.705Z,1528908609.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:09.728Z,1528908609.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:10.104Z,1528908610.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:10.122Z,1528908610.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:10.500Z,1528908610.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:10.524Z,1528908610.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:10.913Z,1528908610.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:10.931Z,1528908610.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:11.313Z,1528908611.313 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:11.331Z,1528908611.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:11.706Z,1528908611.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:11.723Z,1528908611.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:12.105Z,1528908612.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:12.123Z,1528908612.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:12.503Z,1528908612.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:12.529Z,1528908612.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:12.901Z,1528908612.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:12.918Z,1528908612.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:13.307Z,1528908613.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:13.324Z,1528908613.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:13.704Z,1528908613.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:13.722Z,1528908613.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:14.105Z,1528908614.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:14.123Z,1528908614.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:14.513Z,1528908614.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:14.531Z,1528908614.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:14.910Z,1528908614.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:14.928Z,1528908614.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:15.301Z,1528908615.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:15.319Z,1528908615.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:15.705Z,1528908615.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:15.728Z,1528908615.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:16.105Z,1528908616.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:16.123Z,1528908616.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:16.501Z,1528908616.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:16.519Z,1528908616.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:16.913Z,1528908616.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:16.931Z,1528908616.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:17.314Z,1528908617.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:17.332Z,1528908617.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:17.706Z,1528908617.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:17.724Z,1528908617.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:18.106Z,1528908618.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:18.123Z,1528908618.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:18.503Z,1528908618.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:18.528Z,1528908618.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:18.901Z,1528908618.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:18.919Z,1528908618.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:19.304Z,1528908619.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:19.326Z,1528908619.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:19.704Z,1528908619.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:19.722Z,1528908619.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:20.107Z,1528908620.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:20.125Z,1528908620.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:20.513Z,1528908620.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:20.531Z,1528908620.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:20.910Z,1528908620.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:20.928Z,1528908620.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:21.301Z,1528908621.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:21.319Z,1528908621.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:21.705Z,1528908621.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:21.723Z,1528908621.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:22.106Z,1528908622.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:22.124Z,1528908622.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:22.501Z,1528908622.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:22.519Z,1528908622.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:22.913Z,1528908622.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:22.931Z,1528908622.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:23.314Z,1528908623.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:23.332Z,1528908623.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:23.710Z,1528908623.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:23.732Z,1528908623.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:24.106Z,1528908624.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:24.124Z,1528908624.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:24.505Z,1528908624.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:24.523Z,1528908624.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:24.905Z,1528908624.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:24.923Z,1528908624.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:25.306Z,1528908625.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:25.324Z,1528908625.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:25.703Z,1528908625.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:25.729Z,1528908625.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:26.111Z,1528908626.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:26.129Z,1528908626.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:26.515Z,1528908626.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:26.532Z,1528908626.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:26.914Z,1528908626.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:26.932Z,1528908626.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:27.301Z,1528908627.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:27.319Z,1528908627.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:27.706Z,1528908627.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:27.724Z,1528908627.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:28.106Z,1528908628.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:28.123Z,1528908628.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:28.500Z,1528908628.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:28.518Z,1528908628.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:28.915Z,1528908628.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:28.933Z,1528908628.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:29.314Z,1528908629.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:29.336Z,1528908629.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:29.714Z,1528908629.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:29.732Z,1528908629.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:30.105Z,1528908630.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:30.123Z,1528908630.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:33.210Z,1528908633.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:33.234Z,1528908633.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:33.368Z,1528908633.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:33.407Z,1528908633.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:33.767Z,1528908633.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:33.785Z,1528908633.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:34.163Z,1528908634.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:34.181Z,1528908634.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:34.539Z,1528908634.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:34.580Z,1528908634.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:34.943Z,1528908634.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:34.982Z,1528908634.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:35.343Z,1528908635.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:35.376Z,1528908635.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:35.743Z,1528908635.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:35.781Z,1528908635.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:36.162Z,1528908636.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:36.186Z,1528908636.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:36.563Z,1528908636.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:36.582Z,1528908636.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:36.949Z,1528908636.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:36.985Z,1528908636.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:37.343Z,1528908637.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:37.374Z,1528908637.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:37.744Z,1528908637.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:37.784Z,1528908637.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:38.147Z,1528908638.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:38.182Z,1528908638.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:38.543Z,1528908638.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:38.588Z,1528908638.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:38.961Z,1528908638.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:38.990Z,1528908638.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:39.357Z,1528908639.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:39.390Z,1528908639.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:39.762Z,1528908639.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:39.791Z,1528908639.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:40.147Z,1528908640.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:40.166Z,1528908640.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:40.541Z,1528908640.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:40.560Z,1528908640.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:40.947Z,1528908640.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:40.966Z,1528908640.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:41.347Z,1528908641.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:41.365Z,1528908641.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:41.746Z,1528908641.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:41.764Z,1528908641.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:42.162Z,1528908642.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:42.195Z,1528908642.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:42.566Z,1528908642.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:42.592Z,1528908642.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:42.957Z,1528908642.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:42.992Z,1528908642.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:43.347Z,1528908643.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:43.365Z,1528908643.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:43.746Z,1528908643.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:43.764Z,1528908643.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:44.149Z,1528908644.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:44.167Z,1528908644.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:44.547Z,1528908644.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:44.584Z,1528908644.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:44.955Z,1528908644.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:44.980Z,1528908644.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:45.355Z,1528908645.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:45.373Z,1528908645.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:45.758Z,1528908645.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:45.776Z,1528908645.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:46.143Z,1528908646.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:46.176Z,1528908646.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:46.549Z,1528908646.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:46.568Z,1528908646.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:46.950Z,1528908646.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:46.968Z,1528908646.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:47.343Z,1528908647.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:47.377Z,1528908647.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:47.749Z,1528908647.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:47.768Z,1528908647.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:48.158Z,1528908648.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:48.193Z,1528908648.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:48.563Z,1528908648.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:48.583Z,1528908648.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:48.959Z,1528908648.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:48.978Z,1528908648.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:49.344Z,1528908649.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:49.380Z,1528908649.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:49.739Z,1528908649.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:49.776Z,1528908649.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:50.143Z,1528908650.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:50.171Z,1528908650.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:50.543Z,1528908650.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:50.579Z,1528908650.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:50.959Z,1528908650.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:50.978Z,1528908650.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:51.364Z,1528908651.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:51.382Z,1528908651.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:51.764Z,1528908651.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:51.782Z,1528908651.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:52.139Z,1528908652.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:52.176Z,1528908652.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:52.543Z,1528908652.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:52.570Z,1528908652.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:52.943Z,1528908652.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:52.978Z,1528908652.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:53.344Z,1528908653.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:53.376Z,1528908653.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:53.743Z,1528908653.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:53.776Z,1528908653.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:54.169Z,1528908654.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:54.186Z,1528908654.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:54.558Z,1528908654.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:54.582Z,1528908654.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:54.960Z,1528908654.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:54.984Z,1528908654.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:55.343Z,1528908655.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:55.378Z,1528908655.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:55.739Z,1528908655.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:55.773Z,1528908655.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:56.144Z,1528908656.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:56.178Z,1528908656.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:56.543Z,1528908656.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:56.584Z,1528908656.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:56.954Z,1528908656.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:56.988Z,1528908656.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:57.357Z,1528908657.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:57.395Z,1528908657.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:57.758Z,1528908657.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:57.775Z,1528908657.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:58.149Z,1528908658.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:58.168Z,1528908658.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:58.544Z,1528908658.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:58.563Z,1528908658.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:58.958Z,1528908658.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:58.975Z,1528908658.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:59.354Z,1528908659.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:59.371Z,1528908659.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:50:59.753Z,1528908659.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:50:59.776Z,1528908659.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:00.148Z,1528908660.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:00.175Z,1528908660.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:00.543Z,1528908660.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:00.579Z,1528908660.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:00.957Z,1528908660.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:00.975Z,1528908660.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:01.358Z,1528908661.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:01.375Z,1528908661.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:01.750Z,1528908661.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:01.772Z,1528908661.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:02.148Z,1528908662.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:02.166Z,1528908662.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:02.549Z,1528908662.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:02.567Z,1528908662.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:02.955Z,1528908662.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:02.973Z,1528908662.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:03.357Z,1528908663.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:03.375Z,1528908663.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:03.758Z,1528908663.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:03.775Z,1528908663.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:04.149Z,1528908664.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:04.167Z,1528908664.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:04.547Z,1528908664.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:04.566Z,1528908664.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:04.958Z,1528908664.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:05.004Z,1528908665.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:05.358Z,1528908665.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:05.376Z,1528908665.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:05.754Z,1528908665.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:05.772Z,1528908665.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:06.148Z,1528908666.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:06.180Z,1528908666.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:06.548Z,1528908666.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:06.566Z,1528908666.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:06.954Z,1528908666.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:06.972Z,1528908666.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:07.358Z,1528908667.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:07.375Z,1528908667.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:07.754Z,1528908667.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:07.772Z,1528908667.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:08.148Z,1528908668.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:08.166Z,1528908668.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:08.549Z,1528908668.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:08.567Z,1528908668.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:08.954Z,1528908668.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:08.972Z,1528908668.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:09.358Z,1528908669.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:09.375Z,1528908669.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:09.758Z,1528908669.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:09.780Z,1528908669.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:10.150Z,1528908670.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:10.168Z,1528908670.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:10.549Z,1528908670.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:10.567Z,1528908670.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:10.958Z,1528908670.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:10.976Z,1528908670.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:11.354Z,1528908671.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:11.376Z,1528908671.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:11.754Z,1528908671.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:11.773Z,1528908671.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:12.150Z,1528908672.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:12.167Z,1528908672.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:12.543Z,1528908672.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:12.576Z,1528908672.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:12.958Z,1528908672.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:12.980Z,1528908672.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:13.362Z,1528908673.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:13.379Z,1528908673.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:13.759Z,1528908673.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:13.776Z,1528908673.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:14.150Z,1528908674.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:14.168Z,1528908674.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:14.548Z,1528908674.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:14.581Z,1528908674.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:14.956Z,1528908674.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:14.974Z,1528908674.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:15.359Z,1528908675.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:15.380Z,1528908675.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:15.759Z,1528908675.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:15.777Z,1528908675.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:16.142Z,1528908676.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:16.168Z,1528908676.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:16.543Z,1528908676.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:16.568Z,1528908676.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:16.959Z,1528908676.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:16.977Z,1528908676.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:17.359Z,1528908677.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:17.377Z,1528908677.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:17.758Z,1528908677.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:17.780Z,1528908677.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:18.148Z,1528908678.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:18.174Z,1528908678.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:18.554Z,1528908678.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:18.572Z,1528908678.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:18.959Z,1528908678.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:18.977Z,1528908678.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:19.360Z,1528908679.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:19.384Z,1528908679.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:19.756Z,1528908679.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:19.775Z,1528908679.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:20.151Z,1528908680.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:20.170Z,1528908680.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:20.547Z,1528908680.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:20.585Z,1528908680.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:20.957Z,1528908680.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:20.976Z,1528908680.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:21.364Z,1528908681.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:21.383Z,1528908681.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:21.767Z,1528908681.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:21.786Z,1528908681.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:22.144Z,1528908682.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:22.175Z,1528908682.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:22.543Z,1528908682.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:22.578Z,1528908682.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:22.965Z,1528908682.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:22.983Z,1528908682.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:23.370Z,1528908683.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:23.387Z,1528908683.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:23.761Z,1528908683.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:23.779Z,1528908683.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:24.144Z,1528908684.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:24.174Z,1528908684.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:24.543Z,1528908684.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:24.580Z,1528908684.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:24.957Z,1528908684.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:24.979Z,1528908684.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:25.369Z,1528908685.369 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:25.393Z,1528908685.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:25.764Z,1528908685.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:25.782Z,1528908685.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:26.144Z,1528908686.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:26.179Z,1528908686.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:26.546Z,1528908686.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:26.575Z,1528908686.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:26.964Z,1528908686.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:26.982Z,1528908686.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:27.362Z,1528908687.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:27.380Z,1528908687.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:27.764Z,1528908687.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:27.782Z,1528908687.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:28.146Z,1528908688.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:28.183Z,1528908688.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:28.545Z,1528908688.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:28.579Z,1528908688.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:28.969Z,1528908688.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:28.987Z,1528908688.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:29.353Z,1528908689.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:29.388Z,1528908689.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:29.754Z,1528908689.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:29.793Z,1528908689.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:29.796Z,1528908689.796 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T16:51:29.796Z,1528908689.796 [Default:CheckIn:C.Wait] Stopped
2018-06-13T16:51:29.796Z,1528908689.796 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T16:51:29.801Z,1528908689.801 [Default:CheckIn:D] Running Loop=1
2018-06-13T16:51:30.151Z,1528908690.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:30.189Z,1528908690.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:30.197Z,1528908690.197 [Default:CheckIn:D] Stopped
2018-06-13T16:51:30.197Z,1528908690.197 [Default:CheckIn:E] Running Loop=1
2018-06-13T16:51:33.254Z,1528908693.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:33.288Z,1528908693.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:33.299Z,1528908693.299 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 804.279102 min 
2018-06-13T16:51:33.299Z,1528908693.299 [Default:CheckIn:E] Stopped
2018-06-13T16:51:33.299Z,1528908693.299 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T16:51:33.299Z,1528908693.299 [Default:CheckIn] Stopped
2018-06-13T16:51:33.300Z,1528908693.300 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T16:51:33.300Z,1528908693.300 [Default:CheckIn](INFO): Running loop #78
2018-06-13T16:51:33.300Z,1528908693.300 [Default:CheckIn] Running Loop=78
2018-06-13T16:51:33.300Z,1528908693.300 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T16:51:33.300Z,1528908693.300 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T16:51:33.421Z,1528908693.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:33.455Z,1528908693.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:33.833Z,1528908693.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:33.851Z,1528908693.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:34.222Z,1528908694.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:34.264Z,1528908694.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:34.603Z,1528908694.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:34.621Z,1528908694.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:35.011Z,1528908695.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:35.029Z,1528908695.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:35.411Z,1528908695.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:35.429Z,1528908695.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:35.810Z,1528908695.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:35.828Z,1528908695.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:36.221Z,1528908696.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:36.256Z,1528908696.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:36.621Z,1528908696.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:36.663Z,1528908696.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:37.017Z,1528908697.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:37.035Z,1528908697.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:37.411Z,1528908697.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:37.429Z,1528908697.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:37.810Z,1528908697.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:37.828Z,1528908697.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:38.210Z,1528908698.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:38.228Z,1528908698.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:38.614Z,1528908698.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:38.632Z,1528908698.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:39.018Z,1528908699.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:39.036Z,1528908699.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:39.417Z,1528908699.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:39.435Z,1528908699.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:39.821Z,1528908699.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:39.839Z,1528908699.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:40.217Z,1528908700.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:40.236Z,1528908700.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:40.609Z,1528908700.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:40.627Z,1528908700.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:41.022Z,1528908701.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:41.040Z,1528908701.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:41.421Z,1528908701.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:41.439Z,1528908701.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:41.817Z,1528908701.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:41.840Z,1528908701.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:42.215Z,1528908702.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:42.232Z,1528908702.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:42.613Z,1528908702.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:42.631Z,1528908702.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:43.017Z,1528908703.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:43.036Z,1528908703.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:43.421Z,1528908703.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:43.439Z,1528908703.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:43.815Z,1528908703.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:43.834Z,1528908703.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:44.211Z,1528908704.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:44.228Z,1528908704.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:44.613Z,1528908704.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:44.631Z,1528908704.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:45.018Z,1528908705.018 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:45.036Z,1528908705.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:45.417Z,1528908705.417 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:45.435Z,1528908705.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:45.822Z,1528908705.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:45.844Z,1528908705.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:46.215Z,1528908706.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:46.256Z,1528908706.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:46.614Z,1528908706.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:46.632Z,1528908706.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:47.021Z,1528908707.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:47.039Z,1528908707.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:47.421Z,1528908707.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:47.439Z,1528908707.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:47.818Z,1528908707.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:47.837Z,1528908707.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:48.216Z,1528908708.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:48.240Z,1528908708.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:48.615Z,1528908708.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:48.639Z,1528908708.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:49.019Z,1528908709.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:49.036Z,1528908709.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:49.421Z,1528908709.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:49.439Z,1528908709.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:49.819Z,1528908709.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:49.837Z,1528908709.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:50.210Z,1528908710.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:50.228Z,1528908710.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:50.611Z,1528908710.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:50.645Z,1528908710.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:51.022Z,1528908711.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:51.041Z,1528908711.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:51.422Z,1528908711.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:51.440Z,1528908711.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:51.821Z,1528908711.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:51.851Z,1528908711.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:52.215Z,1528908712.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:52.233Z,1528908712.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:52.603Z,1528908712.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:52.635Z,1528908712.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:53.028Z,1528908713.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:53.045Z,1528908713.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:53.423Z,1528908713.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:53.440Z,1528908713.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:53.823Z,1528908713.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:53.841Z,1528908713.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:54.215Z,1528908714.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:54.233Z,1528908714.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:54.614Z,1528908714.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:54.637Z,1528908714.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:55.020Z,1528908715.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:55.038Z,1528908715.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:55.428Z,1528908715.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:55.452Z,1528908715.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:55.823Z,1528908715.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:55.841Z,1528908715.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:56.215Z,1528908716.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:56.232Z,1528908716.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:56.615Z,1528908716.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:56.632Z,1528908716.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:57.026Z,1528908717.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:57.045Z,1528908717.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:57.427Z,1528908717.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:57.445Z,1528908717.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:57.828Z,1528908717.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:57.852Z,1528908717.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:58.208Z,1528908718.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:58.234Z,1528908718.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:58.618Z,1528908718.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:58.636Z,1528908718.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:59.028Z,1528908719.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:59.046Z,1528908719.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:59.428Z,1528908719.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:59.446Z,1528908719.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:51:59.820Z,1528908719.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:51:59.838Z,1528908719.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:00.220Z,1528908720.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:00.238Z,1528908720.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:00.607Z,1528908720.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:00.649Z,1528908720.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:01.024Z,1528908721.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:01.042Z,1528908721.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:01.428Z,1528908721.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:01.447Z,1528908721.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:01.831Z,1528908721.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:01.849Z,1528908721.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:02.217Z,1528908722.217 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:02.235Z,1528908722.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:02.608Z,1528908722.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:02.641Z,1528908722.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:03.025Z,1528908723.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:03.043Z,1528908723.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:03.428Z,1528908723.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:03.446Z,1528908723.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:03.832Z,1528908723.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:03.856Z,1528908723.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:04.208Z,1528908724.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:04.238Z,1528908724.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:04.607Z,1528908724.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:04.646Z,1528908724.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:05.029Z,1528908725.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:05.047Z,1528908725.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:05.431Z,1528908725.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:05.450Z,1528908725.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:05.823Z,1528908725.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:05.842Z,1528908725.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:06.208Z,1528908726.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:06.239Z,1528908726.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:06.611Z,1528908726.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:06.649Z,1528908726.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:07.037Z,1528908727.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:07.055Z,1528908727.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:07.434Z,1528908727.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:07.451Z,1528908727.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:07.813Z,1528908727.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:07.853Z,1528908727.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:08.216Z,1528908728.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:08.248Z,1528908728.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:08.639Z,1528908728.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:08.657Z,1528908728.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:09.021Z,1528908729.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:09.052Z,1528908729.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:09.421Z,1528908729.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:09.450Z,1528908729.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:09.821Z,1528908729.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:09.856Z,1528908729.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:10.211Z,1528908730.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:10.246Z,1528908730.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:10.611Z,1528908730.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:10.645Z,1528908730.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:11.026Z,1528908731.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:11.056Z,1528908731.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:11.425Z,1528908731.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:11.454Z,1528908731.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:11.824Z,1528908731.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:11.854Z,1528908731.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:12.209Z,1528908732.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:12.227Z,1528908732.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:12.610Z,1528908732.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:12.628Z,1528908732.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:13.019Z,1528908733.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:13.046Z,1528908733.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:13.429Z,1528908733.429 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:13.463Z,1528908733.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:13.825Z,1528908733.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:13.859Z,1528908733.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:14.213Z,1528908734.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:14.231Z,1528908734.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:14.615Z,1528908734.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:14.656Z,1528908734.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:15.008Z,1528908735.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:15.036Z,1528908735.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:15.421Z,1528908735.421 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:15.439Z,1528908735.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:15.829Z,1528908735.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:15.863Z,1528908735.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:16.224Z,1528908736.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:16.242Z,1528908736.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:16.614Z,1528908736.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:16.632Z,1528908736.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:17.016Z,1528908737.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:17.034Z,1528908737.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:17.412Z,1528908737.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:17.443Z,1528908737.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:17.813Z,1528908737.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:17.833Z,1528908737.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:18.226Z,1528908738.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:18.248Z,1528908738.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:18.625Z,1528908738.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:18.643Z,1528908738.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:19.022Z,1528908739.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:19.040Z,1528908739.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:19.416Z,1528908739.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:19.441Z,1528908739.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:19.816Z,1528908739.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:19.834Z,1528908739.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:20.212Z,1528908740.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:20.239Z,1528908740.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:20.616Z,1528908740.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:20.648Z,1528908740.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:21.012Z,1528908741.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:21.041Z,1528908741.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:21.425Z,1528908741.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:21.443Z,1528908741.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:21.826Z,1528908741.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:21.852Z,1528908741.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:22.227Z,1528908742.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:22.245Z,1528908742.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:22.603Z,1528908742.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:22.648Z,1528908742.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:23.017Z,1528908743.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:23.056Z,1528908743.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:23.423Z,1528908743.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:23.441Z,1528908743.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:23.816Z,1528908743.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:23.834Z,1528908743.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:24.231Z,1528908744.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:24.249Z,1528908744.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:24.626Z,1528908744.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:24.661Z,1528908744.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:25.017Z,1528908745.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:25.051Z,1528908745.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:25.412Z,1528908745.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:25.442Z,1528908745.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:25.807Z,1528908745.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:25.852Z,1528908745.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:26.209Z,1528908746.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:26.244Z,1528908746.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:26.615Z,1528908746.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:26.649Z,1528908746.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:27.015Z,1528908747.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:27.056Z,1528908747.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:27.414Z,1528908747.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:27.460Z,1528908747.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:27.824Z,1528908747.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:27.864Z,1528908747.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:28.223Z,1528908748.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:28.261Z,1528908748.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:28.616Z,1528908748.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:28.635Z,1528908748.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:29.013Z,1528908749.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:29.062Z,1528908749.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:29.414Z,1528908749.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:29.437Z,1528908749.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:29.815Z,1528908749.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:29.833Z,1528908749.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:30.233Z,1528908750.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:30.268Z,1528908750.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:33.373Z,1528908753.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:33.392Z,1528908753.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:33.541Z,1528908753.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:33.572Z,1528908753.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:33.924Z,1528908753.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:33.954Z,1528908753.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:34.328Z,1528908754.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:34.346Z,1528908754.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:34.721Z,1528908754.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:34.740Z,1528908754.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:35.137Z,1528908755.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:35.171Z,1528908755.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:35.537Z,1528908755.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:35.555Z,1528908755.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:35.933Z,1528908755.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:35.951Z,1528908755.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:36.329Z,1528908756.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:36.347Z,1528908756.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:36.728Z,1528908756.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:36.746Z,1528908756.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:37.124Z,1528908757.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:37.142Z,1528908757.142 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:37.143Z,1528908757.143 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 268
2018-06-13T16:52:37.143Z,1528908757.143 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:52:37.144Z,1528908757.144 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:37.145Z,1528908757.145 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 268
2018-06-13T16:52:37.145Z,1528908757.145 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:52:37.146Z,1528908757.146 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:37.147Z,1528908757.147 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 268
2018-06-13T16:52:37.147Z,1528908757.147 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:52:37.225Z,1528908757.225 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:52:37.225Z,1528908757.225 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:52:37.226Z,1528908757.226 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:52:37.527Z,1528908757.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:37.649Z,1528908757.649 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:52:37.649Z,1528908757.649 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 268
2018-06-13T16:52:37.650Z,1528908757.650 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:52:37.650Z,1528908757.650 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 268
2018-06-13T16:52:37.650Z,1528908757.650 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:52:37.650Z,1528908757.650 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 268
2018-06-13T16:52:37.927Z,1528908757.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:37.959Z,1528908757.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:52:37.959Z,1528908757.959 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:52:37.959Z,1528908757.959 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:52:37.960Z,1528908757.960 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:52:37.960Z,1528908757.960 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:52:37.960Z,1528908757.960 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:52:37.961Z,1528908757.961 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:52:37.961Z,1528908757.961 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:52:37.962Z,1528908757.962 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:52:38.335Z,1528908758.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:38.353Z,1528908758.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:52:38.354Z,1528908758.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:38.743Z,1528908758.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:38.760Z,1528908758.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:52:38.762Z,1528908758.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:39.142Z,1528908759.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:39.160Z,1528908759.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:52:39.161Z,1528908759.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:39.519Z,1528908759.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:39.550Z,1528908759.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:52:39.550Z,1528908759.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:39.923Z,1528908759.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:39.961Z,1528908759.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:52:39.962Z,1528908759.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:40.324Z,1528908760.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:40.352Z,1528908760.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:52:40.353Z,1528908760.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:40.722Z,1528908760.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:40.749Z,1528908760.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:52:40.750Z,1528908760.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:41.144Z,1528908761.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:41.162Z,1528908761.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:52:41.163Z,1528908761.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:41.543Z,1528908761.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:41.562Z,1528908761.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:52:41.563Z,1528908761.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:41.936Z,1528908761.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:41.953Z,1528908761.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:52:41.954Z,1528908761.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:42.324Z,1528908762.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:42.358Z,1528908762.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:52:42.359Z,1528908762.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:42.723Z,1528908762.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:42.760Z,1528908762.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:52:42.760Z,1528908762.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:43.119Z,1528908763.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:43.144Z,1528908763.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:52:43.149Z,1528908763.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:43.524Z,1528908763.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:43.566Z,1528908763.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:52:43.567Z,1528908763.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:43.927Z,1528908763.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:43.968Z,1528908763.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:52:43.973Z,1528908763.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:44.338Z,1528908764.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:44.372Z,1528908764.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:52:44.372Z,1528908764.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:44.737Z,1528908764.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:44.754Z,1528908764.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:52:44.755Z,1528908764.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:45.134Z,1528908765.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:45.151Z,1528908765.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:52:45.152Z,1528908765.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:45.524Z,1528908765.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:45.542Z,1528908765.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:52:45.543Z,1528908765.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:45.930Z,1528908765.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:45.947Z,1528908765.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:52:45.948Z,1528908765.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:46.329Z,1528908766.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:46.348Z,1528908766.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:52:46.349Z,1528908766.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:46.725Z,1528908766.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:46.742Z,1528908766.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:52:46.743Z,1528908766.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:47.137Z,1528908767.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:47.155Z,1528908767.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:52:47.156Z,1528908767.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:47.537Z,1528908767.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:47.555Z,1528908767.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:52:47.556Z,1528908767.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:47.934Z,1528908767.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:47.951Z,1528908767.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:52:47.952Z,1528908767.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:48.330Z,1528908768.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:48.347Z,1528908768.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:52:48.348Z,1528908768.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:48.723Z,1528908768.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:48.747Z,1528908768.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:52:48.748Z,1528908768.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:49.126Z,1528908769.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:49.144Z,1528908769.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:52:49.145Z,1528908769.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:49.531Z,1528908769.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:49.549Z,1528908769.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:52:49.550Z,1528908769.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:49.930Z,1528908769.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:49.947Z,1528908769.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:52:49.948Z,1528908769.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:50.334Z,1528908770.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:50.352Z,1528908770.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:52:50.353Z,1528908770.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:50.737Z,1528908770.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:50.760Z,1528908770.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:52:50.761Z,1528908770.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:51.138Z,1528908771.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:51.156Z,1528908771.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:52:51.157Z,1528908771.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:51.525Z,1528908771.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:51.543Z,1528908771.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:52:51.544Z,1528908771.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:51.930Z,1528908771.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:51.958Z,1528908771.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:52:51.959Z,1528908771.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:52.331Z,1528908772.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:52.348Z,1528908772.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:52:52.350Z,1528908772.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:52.730Z,1528908772.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:52.747Z,1528908772.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:52:52.748Z,1528908772.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:53.137Z,1528908773.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:53.156Z,1528908773.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:52:53.157Z,1528908773.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:53.538Z,1528908773.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:53.560Z,1528908773.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:52:53.561Z,1528908773.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:53.939Z,1528908773.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:53.956Z,1528908773.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:52:53.957Z,1528908773.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:54.327Z,1528908774.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:54.360Z,1528908774.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:52:54.365Z,1528908774.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:54.729Z,1528908774.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:54.752Z,1528908774.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:52:54.753Z,1528908774.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:55.140Z,1528908775.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:55.158Z,1528908775.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:52:55.159Z,1528908775.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:55.545Z,1528908775.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:55.562Z,1528908775.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:52:55.563Z,1528908775.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:55.941Z,1528908775.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:55.964Z,1528908775.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:52:55.965Z,1528908775.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:56.330Z,1528908776.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:56.351Z,1528908776.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:52:56.352Z,1528908776.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:56.732Z,1528908776.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:56.750Z,1528908776.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T16:52:56.751Z,1528908776.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:57.136Z,1528908777.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:57.154Z,1528908777.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:57.543Z,1528908777.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:57.568Z,1528908777.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:57.945Z,1528908777.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:57.963Z,1528908777.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:58.320Z,1528908778.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:58.352Z,1528908778.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:58.719Z,1528908778.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:58.757Z,1528908778.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:59.144Z,1528908779.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:59.162Z,1528908779.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:59.539Z,1528908779.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:59.558Z,1528908779.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:52:59.939Z,1528908779.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:52:59.958Z,1528908779.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:00.324Z,1528908780.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:00.360Z,1528908780.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:00.719Z,1528908780.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:00.758Z,1528908780.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:01.129Z,1528908781.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:01.164Z,1528908781.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:01.545Z,1528908781.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:01.562Z,1528908781.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:01.929Z,1528908781.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:01.966Z,1528908781.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:02.323Z,1528908782.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:02.354Z,1528908782.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:02.723Z,1528908782.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:02.764Z,1528908782.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:03.133Z,1528908783.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:03.161Z,1528908783.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:03.533Z,1528908783.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:03.569Z,1528908783.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:03.937Z,1528908783.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:03.972Z,1528908783.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:04.320Z,1528908784.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:04.360Z,1528908784.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:04.723Z,1528908784.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:04.740Z,1528908784.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:05.141Z,1528908785.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:05.169Z,1528908785.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:05.537Z,1528908785.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:05.576Z,1528908785.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:05.937Z,1528908785.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:05.971Z,1528908785.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:06.326Z,1528908786.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:06.344Z,1528908786.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:06.726Z,1528908786.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:06.744Z,1528908786.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:07.137Z,1528908787.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:07.171Z,1528908787.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:07.545Z,1528908787.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:07.579Z,1528908787.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:07.937Z,1528908787.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:07.955Z,1528908787.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:08.329Z,1528908788.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:08.347Z,1528908788.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:08.723Z,1528908788.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:08.764Z,1528908788.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:09.134Z,1528908789.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:09.162Z,1528908789.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:09.538Z,1528908789.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:09.572Z,1528908789.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:09.937Z,1528908789.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:09.965Z,1528908789.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:10.324Z,1528908790.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:10.362Z,1528908790.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:10.721Z,1528908790.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:10.739Z,1528908790.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:11.137Z,1528908791.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:11.165Z,1528908791.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:11.537Z,1528908791.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:11.566Z,1528908791.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:11.933Z,1528908791.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:11.971Z,1528908791.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:12.328Z,1528908792.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:12.362Z,1528908792.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:12.727Z,1528908792.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:12.745Z,1528908792.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:13.137Z,1528908793.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:13.174Z,1528908793.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:13.537Z,1528908793.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:13.572Z,1528908793.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:13.937Z,1528908793.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:13.970Z,1528908793.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:14.327Z,1528908794.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:14.345Z,1528908794.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:14.726Z,1528908794.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:14.744Z,1528908794.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:15.133Z,1528908795.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:15.167Z,1528908795.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:15.545Z,1528908795.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:15.571Z,1528908795.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:15.937Z,1528908795.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:15.971Z,1528908795.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:16.325Z,1528908796.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:16.344Z,1528908796.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:16.726Z,1528908796.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:16.744Z,1528908796.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:17.145Z,1528908797.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:17.179Z,1528908797.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:17.541Z,1528908797.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:17.575Z,1528908797.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:17.933Z,1528908797.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:17.951Z,1528908797.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:18.328Z,1528908798.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:18.360Z,1528908798.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:18.731Z,1528908798.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:18.749Z,1528908798.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:19.139Z,1528908799.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:19.157Z,1528908799.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:19.539Z,1528908799.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:19.556Z,1528908799.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:19.935Z,1528908799.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:19.954Z,1528908799.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:20.332Z,1528908800.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:20.350Z,1528908800.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:20.734Z,1528908800.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:20.756Z,1528908800.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:21.138Z,1528908801.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:21.157Z,1528908801.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:21.538Z,1528908801.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:21.560Z,1528908801.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:21.939Z,1528908801.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:21.957Z,1528908801.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:22.329Z,1528908802.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:22.347Z,1528908802.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:22.729Z,1528908802.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:22.746Z,1528908802.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:23.138Z,1528908803.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:23.156Z,1528908803.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:23.538Z,1528908803.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:23.556Z,1528908803.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:23.938Z,1528908803.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:23.956Z,1528908803.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:24.330Z,1528908804.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:24.348Z,1528908804.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:24.729Z,1528908804.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:24.747Z,1528908804.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:25.139Z,1528908805.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:25.157Z,1528908805.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:25.541Z,1528908805.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:25.559Z,1528908805.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:25.939Z,1528908805.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:25.957Z,1528908805.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:26.327Z,1528908806.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:26.359Z,1528908806.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:26.728Z,1528908806.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:26.762Z,1528908806.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:27.139Z,1528908807.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:27.157Z,1528908807.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:27.541Z,1528908807.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:27.559Z,1528908807.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:27.939Z,1528908807.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:27.958Z,1528908807.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:28.332Z,1528908808.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:28.359Z,1528908808.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:28.734Z,1528908808.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:28.756Z,1528908808.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:29.143Z,1528908809.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:29.161Z,1528908809.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:29.539Z,1528908809.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:29.564Z,1528908809.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:29.945Z,1528908809.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:29.969Z,1528908809.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:30.335Z,1528908810.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:30.353Z,1528908810.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:33.439Z,1528908813.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:33.457Z,1528908813.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:33.592Z,1528908813.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:33.610Z,1528908813.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:33.993Z,1528908813.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:34.016Z,1528908814.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:34.388Z,1528908814.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:34.406Z,1528908814.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:34.768Z,1528908814.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:34.806Z,1528908814.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:35.167Z,1528908815.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:35.201Z,1528908815.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:35.568Z,1528908815.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:35.603Z,1528908815.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:35.967Z,1528908815.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:36.008Z,1528908816.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:36.386Z,1528908816.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:36.414Z,1528908816.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:36.787Z,1528908816.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:36.816Z,1528908816.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:37.182Z,1528908817.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:37.215Z,1528908817.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:37.571Z,1528908817.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:37.590Z,1528908817.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:37.971Z,1528908817.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:37.996Z,1528908817.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:38.370Z,1528908818.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:38.388Z,1528908818.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:38.774Z,1528908818.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:38.798Z,1528908818.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:39.175Z,1528908819.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:39.194Z,1528908819.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:39.582Z,1528908819.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:39.600Z,1528908819.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:39.982Z,1528908819.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:39.999Z,1528908819.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:40.372Z,1528908820.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:40.398Z,1528908820.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:40.763Z,1528908820.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:40.793Z,1528908820.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:41.193Z,1528908821.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:41.211Z,1528908821.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:41.590Z,1528908821.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:41.608Z,1528908821.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:41.980Z,1528908821.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:41.999Z,1528908821.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:42.368Z,1528908822.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:42.396Z,1528908822.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:42.771Z,1528908822.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:42.800Z,1528908822.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:43.183Z,1528908823.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:43.202Z,1528908823.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:43.588Z,1528908823.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:43.608Z,1528908823.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:43.984Z,1528908823.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:44.002Z,1528908824.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:44.382Z,1528908824.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:44.400Z,1528908824.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:44.767Z,1528908824.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:44.795Z,1528908824.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:45.184Z,1528908825.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:45.203Z,1528908825.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:45.583Z,1528908825.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:45.601Z,1528908825.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:45.986Z,1528908825.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:46.012Z,1528908826.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:46.372Z,1528908826.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:46.401Z,1528908826.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:46.763Z,1528908826.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:46.796Z,1528908826.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:47.188Z,1528908827.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:47.206Z,1528908827.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:47.591Z,1528908827.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:47.609Z,1528908827.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:47.987Z,1528908827.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:48.006Z,1528908828.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:48.368Z,1528908828.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:48.398Z,1528908828.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:48.767Z,1528908828.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:48.801Z,1528908828.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:49.185Z,1528908829.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:49.213Z,1528908829.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:49.585Z,1528908829.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:49.620Z,1528908829.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:49.978Z,1528908829.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:50.016Z,1528908830.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:50.367Z,1528908830.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:50.386Z,1528908830.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:50.774Z,1528908830.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:50.792Z,1528908830.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:51.186Z,1528908831.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:51.226Z,1528908831.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:51.581Z,1528908831.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:51.599Z,1528908831.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:51.982Z,1528908831.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:51.999Z,1528908831.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:52.374Z,1528908832.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:52.408Z,1528908832.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:52.774Z,1528908832.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:52.792Z,1528908832.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:53.186Z,1528908833.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:53.203Z,1528908833.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:53.582Z,1528908833.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:53.604Z,1528908833.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:53.981Z,1528908833.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:54.004Z,1528908834.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:54.379Z,1528908834.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:54.397Z,1528908834.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:54.777Z,1528908834.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:54.795Z,1528908834.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:55.182Z,1528908835.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:55.201Z,1528908835.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:55.585Z,1528908835.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:55.603Z,1528908835.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:55.982Z,1528908835.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:56.000Z,1528908836.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:56.373Z,1528908836.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:56.391Z,1528908836.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:56.771Z,1528908836.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:56.795Z,1528908836.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:57.183Z,1528908837.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:57.224Z,1528908837.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:57.582Z,1528908837.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:57.600Z,1528908837.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:57.986Z,1528908837.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:58.003Z,1528908838.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:58.374Z,1528908838.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:58.396Z,1528908838.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:58.773Z,1528908838.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:58.796Z,1528908838.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:59.183Z,1528908839.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:59.201Z,1528908839.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:59.586Z,1528908839.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:53:59.603Z,1528908839.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:53:59.984Z,1528908839.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:00.002Z,1528908840.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:00.373Z,1528908840.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:00.404Z,1528908840.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:00.774Z,1528908840.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:00.804Z,1528908840.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:01.176Z,1528908841.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:01.194Z,1528908841.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:01.591Z,1528908841.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:01.609Z,1528908841.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:01.986Z,1528908841.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:02.019Z,1528908842.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:02.382Z,1528908842.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:02.400Z,1528908842.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:02.771Z,1528908842.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:02.800Z,1528908842.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:03.171Z,1528908843.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:03.199Z,1528908843.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:03.563Z,1528908843.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:03.604Z,1528908843.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:03.969Z,1528908843.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:03.997Z,1528908843.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:04.388Z,1528908844.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:04.406Z,1528908844.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:04.788Z,1528908844.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:04.806Z,1528908844.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:05.192Z,1528908845.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:05.210Z,1528908845.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:05.569Z,1528908845.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:05.599Z,1528908845.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:05.965Z,1528908845.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:06.003Z,1528908846.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:06.371Z,1528908846.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:06.404Z,1528908846.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:06.763Z,1528908846.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:06.811Z,1528908846.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:07.163Z,1528908847.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:07.203Z,1528908847.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:07.581Z,1528908847.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:07.610Z,1528908847.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:07.981Z,1528908847.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:08.016Z,1528908848.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:08.373Z,1528908848.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:08.406Z,1528908848.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:08.768Z,1528908848.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:08.808Z,1528908848.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:09.169Z,1528908849.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:09.208Z,1528908849.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:09.567Z,1528908849.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:09.593Z,1528908849.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:09.967Z,1528908849.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:10.012Z,1528908850.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:10.380Z,1528908850.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:10.412Z,1528908850.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:10.782Z,1528908850.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:10.816Z,1528908850.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:11.185Z,1528908851.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:11.213Z,1528908851.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:11.571Z,1528908851.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:11.612Z,1528908851.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:11.971Z,1528908851.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:12.009Z,1528908852.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:12.374Z,1528908852.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:12.391Z,1528908852.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:12.775Z,1528908852.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:12.793Z,1528908852.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:13.168Z,1528908853.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:13.214Z,1528908853.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:13.584Z,1528908853.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:13.603Z,1528908853.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:13.984Z,1528908853.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:14.002Z,1528908854.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:14.384Z,1528908854.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:14.402Z,1528908854.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:14.774Z,1528908854.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:14.821Z,1528908854.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:15.173Z,1528908855.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:15.196Z,1528908855.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:15.572Z,1528908855.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:15.593Z,1528908855.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:15.973Z,1528908855.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:16.016Z,1528908856.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:16.379Z,1528908856.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:16.427Z,1528908856.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:16.779Z,1528908856.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:16.802Z,1528908856.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:17.183Z,1528908857.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:17.202Z,1528908857.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:17.570Z,1528908857.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:17.596Z,1528908857.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:17.970Z,1528908857.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:18.018Z,1528908858.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:18.375Z,1528908858.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:18.399Z,1528908858.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:18.771Z,1528908858.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:18.812Z,1528908858.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:19.173Z,1528908859.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:19.208Z,1528908859.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:19.588Z,1528908859.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:19.631Z,1528908859.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:19.988Z,1528908859.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:20.032Z,1528908860.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:20.387Z,1528908860.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:20.405Z,1528908860.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:20.774Z,1528908860.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:20.802Z,1528908860.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:21.167Z,1528908861.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:21.231Z,1528908861.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:21.563Z,1528908861.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:21.599Z,1528908861.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:21.967Z,1528908861.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:22.014Z,1528908862.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:22.383Z,1528908862.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:22.402Z,1528908862.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:22.786Z,1528908862.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:22.820Z,1528908862.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:23.188Z,1528908863.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:23.212Z,1528908863.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:23.567Z,1528908863.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:23.619Z,1528908863.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:23.963Z,1528908863.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:23.999Z,1528908863.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:24.367Z,1528908864.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:24.416Z,1528908864.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:24.763Z,1528908864.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:24.805Z,1528908864.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:25.163Z,1528908865.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:25.214Z,1528908865.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:25.592Z,1528908865.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:25.610Z,1528908865.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:25.987Z,1528908865.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:26.039Z,1528908866.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:26.380Z,1528908866.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:26.403Z,1528908866.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:26.767Z,1528908866.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:26.804Z,1528908866.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:27.167Z,1528908867.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:27.208Z,1528908867.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:27.563Z,1528908867.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:27.601Z,1528908867.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:27.967Z,1528908867.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:28.008Z,1528908868.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:28.373Z,1528908868.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:28.418Z,1528908868.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:28.777Z,1528908868.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:28.819Z,1528908868.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:29.181Z,1528908869.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:29.225Z,1528908869.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:29.563Z,1528908869.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:29.581Z,1528908869.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:29.967Z,1528908869.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:29.985Z,1528908869.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:30.372Z,1528908870.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:30.404Z,1528908870.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:33.482Z,1528908873.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:33.500Z,1528908873.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:33.643Z,1528908873.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:33.674Z,1528908873.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:34.058Z,1528908874.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:34.083Z,1528908874.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:34.467Z,1528908874.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:34.485Z,1528908874.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:34.849Z,1528908874.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:34.876Z,1528908874.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:35.239Z,1528908875.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:35.277Z,1528908875.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:35.643Z,1528908875.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:35.679Z,1528908875.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:36.042Z,1528908876.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:36.076Z,1528908876.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:36.453Z,1528908876.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:36.481Z,1528908876.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:36.849Z,1528908876.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:36.867Z,1528908876.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:37.253Z,1528908877.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:37.271Z,1528908877.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:37.646Z,1528908877.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:37.664Z,1528908877.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:38.044Z,1528908878.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:38.062Z,1528908878.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:38.444Z,1528908878.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:38.462Z,1528908878.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:38.846Z,1528908878.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:38.880Z,1528908878.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:39.253Z,1528908879.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:39.272Z,1528908879.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:39.657Z,1528908879.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:39.675Z,1528908879.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:40.053Z,1528908880.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:40.071Z,1528908880.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:40.449Z,1528908880.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:40.467Z,1528908880.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:40.846Z,1528908880.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:40.865Z,1528908880.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:41.253Z,1528908881.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:41.271Z,1528908881.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:41.653Z,1528908881.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:41.671Z,1528908881.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:42.054Z,1528908882.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:42.072Z,1528908882.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:42.449Z,1528908882.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:42.467Z,1528908882.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:42.848Z,1528908882.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:42.866Z,1528908882.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:43.250Z,1528908883.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:43.268Z,1528908883.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:43.655Z,1528908883.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:43.673Z,1528908883.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:44.053Z,1528908884.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:44.076Z,1528908884.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:44.446Z,1528908884.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:44.464Z,1528908884.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:44.848Z,1528908884.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:44.866Z,1528908884.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:45.253Z,1528908885.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:45.271Z,1528908885.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:45.653Z,1528908885.653 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:45.671Z,1528908885.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:46.057Z,1528908886.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:46.075Z,1528908886.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:46.445Z,1528908886.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:46.464Z,1528908886.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:46.844Z,1528908886.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:46.862Z,1528908886.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:47.245Z,1528908887.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:47.270Z,1528908887.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:47.657Z,1528908887.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:47.676Z,1528908887.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:48.053Z,1528908888.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:48.071Z,1528908888.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:48.456Z,1528908888.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:48.480Z,1528908888.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:48.847Z,1528908888.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:48.878Z,1528908888.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:49.243Z,1528908889.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:49.261Z,1528908889.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:49.650Z,1528908889.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:49.668Z,1528908889.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:50.045Z,1528908890.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:50.071Z,1528908890.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:50.455Z,1528908890.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:50.480Z,1528908890.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:50.853Z,1528908890.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:50.871Z,1528908890.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:51.253Z,1528908891.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:51.271Z,1528908891.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:51.646Z,1528908891.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:51.667Z,1528908891.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:52.047Z,1528908892.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:52.069Z,1528908892.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:52.447Z,1528908892.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:52.474Z,1528908892.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:52.846Z,1528908892.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:52.864Z,1528908892.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:53.251Z,1528908893.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:53.276Z,1528908893.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:53.656Z,1528908893.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:53.674Z,1528908893.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:54.053Z,1528908894.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:54.071Z,1528908894.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:54.457Z,1528908894.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:54.497Z,1528908894.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:54.845Z,1528908894.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:54.898Z,1528908894.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:55.239Z,1528908895.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:55.292Z,1528908895.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:55.647Z,1528908895.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:55.671Z,1528908895.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:56.048Z,1528908896.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:56.066Z,1528908896.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:56.453Z,1528908896.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:56.474Z,1528908896.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:56.857Z,1528908896.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:56.875Z,1528908896.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:57.255Z,1528908897.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:57.290Z,1528908897.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:57.644Z,1528908897.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:57.662Z,1528908897.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:58.051Z,1528908898.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:58.073Z,1528908898.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:58.436Z,1528908898.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:58.469Z,1528908898.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:58.847Z,1528908898.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:58.866Z,1528908898.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:59.248Z,1528908899.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:59.273Z,1528908899.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:54:59.660Z,1528908899.660 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:54:59.680Z,1528908899.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:00.059Z,1528908900.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:00.076Z,1528908900.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:00.460Z,1528908900.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:00.496Z,1528908900.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:00.848Z,1528908900.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:00.867Z,1528908900.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:01.235Z,1528908901.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:01.280Z,1528908901.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:01.640Z,1528908901.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:01.673Z,1528908901.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:02.039Z,1528908902.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:02.076Z,1528908902.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:02.452Z,1528908902.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:02.477Z,1528908902.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:02.853Z,1528908902.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:02.888Z,1528908902.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:03.255Z,1528908903.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:03.286Z,1528908903.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:03.643Z,1528908903.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:03.664Z,1528908903.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:04.046Z,1528908904.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:04.064Z,1528908904.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:04.446Z,1528908904.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:04.492Z,1528908904.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:04.844Z,1528908904.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:04.867Z,1528908904.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:05.242Z,1528908905.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:05.265Z,1528908905.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:05.652Z,1528908905.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:05.670Z,1528908905.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:06.053Z,1528908906.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:06.099Z,1528908906.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:06.454Z,1528908906.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:06.476Z,1528908906.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:06.839Z,1528908906.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:06.876Z,1528908906.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:07.248Z,1528908907.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:07.266Z,1528908907.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:07.647Z,1528908907.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:07.698Z,1528908907.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:08.045Z,1528908908.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:08.069Z,1528908908.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:08.451Z,1528908908.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:08.473Z,1528908908.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:08.852Z,1528908908.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:08.876Z,1528908908.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:09.250Z,1528908909.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:09.297Z,1528908909.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:09.648Z,1528908909.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:09.671Z,1528908909.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:10.046Z,1528908910.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:10.068Z,1528908910.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:10.438Z,1528908910.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:10.475Z,1528908910.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:10.845Z,1528908910.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:10.902Z,1528908910.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:11.246Z,1528908911.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:11.273Z,1528908911.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:11.655Z,1528908911.655 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:11.677Z,1528908911.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:12.056Z,1528908912.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:12.074Z,1528908912.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:12.455Z,1528908912.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:12.500Z,1528908912.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:12.845Z,1528908912.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:12.863Z,1528908912.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:13.245Z,1528908913.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:13.268Z,1528908913.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:13.643Z,1528908913.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:13.675Z,1528908913.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:14.039Z,1528908914.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:14.063Z,1528908914.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:14.451Z,1528908914.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:14.471Z,1528908914.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:14.853Z,1528908914.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:14.876Z,1528908914.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:15.255Z,1528908915.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:15.275Z,1528908915.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:15.644Z,1528908915.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:15.681Z,1528908915.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:16.046Z,1528908916.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:16.063Z,1528908916.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:16.442Z,1528908916.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:16.460Z,1528908916.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:16.845Z,1528908916.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:16.868Z,1528908916.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:17.243Z,1528908917.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:17.266Z,1528908917.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:17.654Z,1528908917.654 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:17.672Z,1528908917.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:18.054Z,1528908918.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:18.077Z,1528908918.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:18.457Z,1528908918.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:18.478Z,1528908918.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:18.839Z,1528908918.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:18.880Z,1528908918.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:19.245Z,1528908919.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:19.263Z,1528908919.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:19.643Z,1528908919.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:19.669Z,1528908919.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:20.039Z,1528908920.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:20.068Z,1528908920.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:20.454Z,1528908920.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:20.473Z,1528908920.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:20.858Z,1528908920.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:20.876Z,1528908920.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:21.255Z,1528908921.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:21.279Z,1528908921.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:21.635Z,1528908921.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:21.665Z,1528908921.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:22.046Z,1528908922.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:22.067Z,1528908922.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:22.435Z,1528908922.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:22.472Z,1528908922.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:22.845Z,1528908922.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:22.863Z,1528908922.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:23.243Z,1528908923.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:23.278Z,1528908923.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:23.656Z,1528908923.656 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:23.674Z,1528908923.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:24.049Z,1528908924.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:24.078Z,1528908924.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:24.460Z,1528908924.460 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:24.483Z,1528908924.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:24.835Z,1528908924.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:24.872Z,1528908924.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:25.239Z,1528908925.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:25.274Z,1528908925.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:25.640Z,1528908925.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:25.679Z,1528908925.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:26.035Z,1528908926.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:26.081Z,1528908926.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:26.449Z,1528908926.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:26.489Z,1528908926.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:26.857Z,1528908926.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:26.883Z,1528908926.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:27.253Z,1528908927.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:27.289Z,1528908927.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:27.642Z,1528908927.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:27.660Z,1528908927.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:28.043Z,1528908928.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:28.061Z,1528908928.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:28.440Z,1528908928.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:28.458Z,1528908928.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:28.843Z,1528908928.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:28.868Z,1528908928.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:29.244Z,1528908929.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:29.262Z,1528908929.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:29.650Z,1528908929.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:29.674Z,1528908929.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:30.058Z,1528908930.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:30.099Z,1528908930.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:30.457Z,1528908930.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:30.475Z,1528908930.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:33.561Z,1528908933.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:33.581Z,1528908933.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:33.722Z,1528908933.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:33.760Z,1528908933.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:34.129Z,1528908934.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:34.160Z,1528908934.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:34.533Z,1528908934.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:34.560Z,1528908934.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:34.928Z,1528908934.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:34.962Z,1528908934.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:35.317Z,1528908935.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:35.335Z,1528908935.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:35.715Z,1528908935.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:35.733Z,1528908935.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:36.116Z,1528908936.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:36.134Z,1528908936.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:36.528Z,1528908936.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:36.563Z,1528908936.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:36.926Z,1528908936.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:36.962Z,1528908936.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:37.330Z,1528908937.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:37.362Z,1528908937.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:37.717Z,1528908937.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:37.735Z,1528908937.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:38.110Z,1528908938.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:38.159Z,1528908938.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:38.159Z,1528908938.159 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 269
2018-06-13T16:55:38.159Z,1528908938.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:55:38.160Z,1528908938.160 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:38.161Z,1528908938.161 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 269
2018-06-13T16:55:38.161Z,1528908938.161 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:55:38.162Z,1528908938.162 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:38.163Z,1528908938.163 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 269
2018-06-13T16:55:38.163Z,1528908938.163 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:55:38.241Z,1528908938.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:55:38.241Z,1528908938.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:55:38.242Z,1528908938.242 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:55:38.516Z,1528908938.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:38.637Z,1528908938.637 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:55:38.637Z,1528908938.637 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 269
2018-06-13T16:55:38.638Z,1528908938.638 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:55:38.638Z,1528908938.638 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 269
2018-06-13T16:55:38.638Z,1528908938.638 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:55:38.638Z,1528908938.638 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 269
2018-06-13T16:55:38.920Z,1528908938.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:38.949Z,1528908938.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:55:38.949Z,1528908938.949 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:55:38.950Z,1528908938.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:55:38.950Z,1528908938.950 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:55:38.950Z,1528908938.950 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:55:38.951Z,1528908938.951 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:55:38.951Z,1528908938.951 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:55:38.951Z,1528908938.951 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:55:38.952Z,1528908938.952 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:55:39.319Z,1528908939.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:39.337Z,1528908939.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:55:39.338Z,1528908939.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:39.731Z,1528908939.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:39.749Z,1528908939.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:55:39.750Z,1528908939.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:40.130Z,1528908940.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:40.171Z,1528908940.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:55:40.172Z,1528908940.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:40.523Z,1528908940.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:40.547Z,1528908940.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:55:40.548Z,1528908940.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:40.914Z,1528908940.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:40.947Z,1528908940.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:55:40.948Z,1528908940.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:41.311Z,1528908941.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:41.356Z,1528908941.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:55:41.356Z,1528908941.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:41.708Z,1528908941.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:41.756Z,1528908941.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:55:41.756Z,1528908941.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:42.113Z,1528908942.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:42.148Z,1528908942.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:55:42.149Z,1528908942.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:42.533Z,1528908942.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:42.550Z,1528908942.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:55:42.551Z,1528908942.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:42.933Z,1528908942.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:42.951Z,1528908942.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:55:42.951Z,1528908942.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:43.332Z,1528908943.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:43.349Z,1528908943.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:55:43.350Z,1528908943.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:43.714Z,1528908943.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:43.756Z,1528908943.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:55:43.757Z,1528908943.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:44.115Z,1528908944.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:44.153Z,1528908944.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:55:44.154Z,1528908944.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:44.507Z,1528908944.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:44.551Z,1528908944.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:55:44.552Z,1528908944.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:44.912Z,1528908944.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:44.957Z,1528908944.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:55:44.958Z,1528908944.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:45.315Z,1528908945.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:45.349Z,1528908945.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:55:45.350Z,1528908945.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:45.723Z,1528908945.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:45.755Z,1528908945.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:55:45.756Z,1528908945.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:46.126Z,1528908946.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:46.159Z,1528908946.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:55:46.159Z,1528908946.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:46.529Z,1528908946.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:46.558Z,1528908946.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:55:46.559Z,1528908946.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:46.907Z,1528908946.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:46.930Z,1528908946.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:55:46.931Z,1528908946.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:47.318Z,1528908947.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:47.336Z,1528908947.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:55:47.353Z,1528908947.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:47.713Z,1528908947.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:47.763Z,1528908947.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:55:47.764Z,1528908947.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:48.114Z,1528908948.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:48.137Z,1528908948.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:55:48.138Z,1528908948.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:48.528Z,1528908948.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:48.566Z,1528908948.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:55:48.567Z,1528908948.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:48.923Z,1528908948.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:48.941Z,1528908948.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:55:48.942Z,1528908948.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:49.322Z,1528908949.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:49.370Z,1528908949.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:55:49.370Z,1528908949.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:49.719Z,1528908949.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:49.742Z,1528908949.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:55:49.743Z,1528908949.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:50.121Z,1528908950.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:50.140Z,1528908950.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:55:50.140Z,1528908950.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:50.520Z,1528908950.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:50.553Z,1528908950.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:55:50.554Z,1528908950.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:50.919Z,1528908950.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:50.952Z,1528908950.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:55:50.971Z,1528908950.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:51.322Z,1528908951.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:51.344Z,1528908951.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:55:51.345Z,1528908951.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:51.726Z,1528908951.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:51.744Z,1528908951.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:55:51.746Z,1528908951.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:52.131Z,1528908952.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:52.148Z,1528908952.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:55:52.150Z,1528908952.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:52.528Z,1528908952.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:52.571Z,1528908952.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:55:52.572Z,1528908952.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:52.918Z,1528908952.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:52.941Z,1528908952.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:55:52.942Z,1528908952.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:53.318Z,1528908953.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:53.345Z,1528908953.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:55:53.346Z,1528908953.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:53.712Z,1528908953.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:53.742Z,1528908953.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:55:53.743Z,1528908953.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:54.113Z,1528908954.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:54.152Z,1528908954.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:55:54.169Z,1528908954.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:54.528Z,1528908954.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:54.550Z,1528908954.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:55:54.551Z,1528908954.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:54.930Z,1528908954.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:54.952Z,1528908954.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:55:54.953Z,1528908954.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:55.325Z,1528908955.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:55.352Z,1528908955.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:55:55.357Z,1528908955.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:55.711Z,1528908955.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:55.757Z,1528908955.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:55:55.758Z,1528908955.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:56.107Z,1528908956.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:56.145Z,1528908956.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:55:56.146Z,1528908956.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:56.507Z,1528908956.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:56.553Z,1528908956.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:55:56.554Z,1528908956.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:56.912Z,1528908956.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:56.944Z,1528908956.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:55:56.946Z,1528908956.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:57.312Z,1528908957.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:57.353Z,1528908957.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:55:57.355Z,1528908957.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:57.717Z,1528908957.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:57.758Z,1528908957.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T16:55:57.759Z,1528908957.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:58.136Z,1528908958.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:58.154Z,1528908958.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T16:55:58.155Z,1528908958.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:58.519Z,1528908958.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:58.555Z,1528908958.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:58.907Z,1528908958.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:58.943Z,1528908958.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:59.312Z,1528908959.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:59.353Z,1528908959.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:55:59.712Z,1528908959.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:55:59.751Z,1528908959.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:00.107Z,1528908960.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:00.138Z,1528908960.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:00.532Z,1528908960.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:00.551Z,1528908960.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:00.921Z,1528908960.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:00.964Z,1528908960.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:01.317Z,1528908961.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:01.359Z,1528908961.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:01.711Z,1528908961.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:01.756Z,1528908961.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:02.111Z,1528908962.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:02.145Z,1528908962.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:02.511Z,1528908962.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:02.529Z,1528908962.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:02.912Z,1528908962.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:02.954Z,1528908962.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:03.314Z,1528908963.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:03.338Z,1528908963.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:03.717Z,1528908963.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:03.740Z,1528908963.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:04.125Z,1528908964.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:04.168Z,1528908964.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:04.522Z,1528908964.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:04.561Z,1528908964.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:04.913Z,1528908964.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:04.936Z,1528908964.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:05.310Z,1528908965.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:05.344Z,1528908965.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:05.711Z,1528908965.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:05.736Z,1528908965.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:06.112Z,1528908966.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:06.132Z,1528908966.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:06.540Z,1528908966.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:06.574Z,1528908966.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:06.926Z,1528908966.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:06.973Z,1528908966.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:07.322Z,1528908967.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:07.340Z,1528908967.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:07.718Z,1528908967.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:07.736Z,1528908967.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:08.117Z,1528908968.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:08.141Z,1528908968.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:08.513Z,1528908968.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:08.539Z,1528908968.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:08.920Z,1528908968.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:08.937Z,1528908968.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:09.315Z,1528908969.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:09.352Z,1528908969.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:09.723Z,1528908969.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:09.746Z,1528908969.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:10.131Z,1528908970.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:10.149Z,1528908970.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:10.523Z,1528908970.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:10.541Z,1528908970.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:10.907Z,1528908970.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:10.943Z,1528908970.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:11.307Z,1528908971.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:11.349Z,1528908971.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:11.707Z,1528908971.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:11.746Z,1528908971.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:12.107Z,1528908972.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:12.148Z,1528908972.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:12.532Z,1528908972.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:12.552Z,1528908972.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:12.927Z,1528908972.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:12.951Z,1528908972.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:13.323Z,1528908973.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:13.341Z,1528908973.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:13.711Z,1528908973.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:13.748Z,1528908973.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:14.111Z,1528908974.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:14.147Z,1528908974.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:14.507Z,1528908974.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:14.553Z,1528908974.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:14.912Z,1528908974.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:14.948Z,1528908974.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:15.307Z,1528908975.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:15.344Z,1528908975.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:15.728Z,1528908975.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:15.747Z,1528908975.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:16.132Z,1528908976.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:16.155Z,1528908976.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:16.528Z,1528908976.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:16.546Z,1528908976.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:16.907Z,1528908976.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:16.933Z,1528908976.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:17.311Z,1528908977.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:17.349Z,1528908977.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:17.707Z,1528908977.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:17.758Z,1528908977.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:18.107Z,1528908978.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:18.125Z,1528908978.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:18.525Z,1528908978.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:18.554Z,1528908978.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:18.925Z,1528908978.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:18.953Z,1528908978.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:19.321Z,1528908979.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:19.366Z,1528908979.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:19.714Z,1528908979.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:19.736Z,1528908979.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:20.114Z,1528908980.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:20.132Z,1528908980.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:20.514Z,1528908980.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:20.532Z,1528908980.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:20.916Z,1528908980.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:20.959Z,1528908980.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:21.316Z,1528908981.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:21.335Z,1528908981.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:21.718Z,1528908981.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:21.736Z,1528908981.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:22.129Z,1528908982.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:22.174Z,1528908982.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:22.524Z,1528908982.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:22.542Z,1528908982.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:22.913Z,1528908982.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:22.931Z,1528908982.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:23.315Z,1528908983.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:23.341Z,1528908983.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:23.715Z,1528908983.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:23.740Z,1528908983.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:24.113Z,1528908984.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:24.131Z,1528908984.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:24.527Z,1528908984.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:24.546Z,1528908984.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:24.927Z,1528908984.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:24.946Z,1528908984.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:25.323Z,1528908985.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:25.346Z,1528908985.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:25.711Z,1528908985.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:25.746Z,1528908985.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:26.111Z,1528908986.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:26.140Z,1528908986.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:26.525Z,1528908986.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:26.544Z,1528908986.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:26.912Z,1528908986.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:26.953Z,1528908986.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:27.307Z,1528908987.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:27.345Z,1528908987.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:27.717Z,1528908987.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:27.752Z,1528908987.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:28.133Z,1528908988.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:28.151Z,1528908988.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:28.521Z,1528908988.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:28.556Z,1528908988.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:28.907Z,1528908988.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:28.937Z,1528908988.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:29.311Z,1528908989.311 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:29.346Z,1528908989.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:29.707Z,1528908989.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:29.732Z,1528908989.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:30.114Z,1528908990.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:30.132Z,1528908990.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:30.529Z,1528908990.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:30.563Z,1528908990.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:33.651Z,1528908993.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:33.669Z,1528908993.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:33.672Z,1528908993.672 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T16:51:33.3Z
2018-06-13T16:56:33.672Z,1528908993.672 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T16:56:33.673Z,1528908993.673 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T16:56:33.791Z,1528908993.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:33.816Z,1528908993.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:34.923Z,1528908994.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:34.967Z,1528908994.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:35.074Z,1528908995.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:35.092Z,1528908995.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:35.489Z,1528908995.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:35.516Z,1528908995.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:35.894Z,1528908995.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:35.924Z,1528908995.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:36.289Z,1528908996.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:36.316Z,1528908996.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:36.679Z,1528908996.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:36.696Z,1528908996.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:37.079Z,1528908997.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:37.097Z,1528908997.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:37.478Z,1528908997.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:37.496Z,1528908997.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:37.879Z,1528908997.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:37.898Z,1528908997.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:38.283Z,1528908998.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:38.324Z,1528908998.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:38.689Z,1528908998.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:38.707Z,1528908998.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:39.097Z,1528908999.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:39.130Z,1528908999.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:42.275Z,1528909002.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:42.294Z,1528909002.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:42.377Z,1528909002.377 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0312.lzma
2018-06-13T16:56:42.397Z,1528909002.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:42.445Z,1528909002.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:42.803Z,1528909002.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:42.831Z,1528909002.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:43.178Z,1528909003.178 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0312.lzma.bak
2018-06-13T16:56:43.178Z,1528909003.178 [DataOverHttps](INFO): SBD MOMSN=8329577
2018-06-13T16:56:43.208Z,1528909003.208 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:43.244Z,1528909003.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:45.085Z,1528909005.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:45.104Z,1528909005.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:45.253Z,1528909005.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:45.297Z,1528909005.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:45.650Z,1528909005.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:45.685Z,1528909005.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:46.034Z,1528909006.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:46.056Z,1528909006.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:46.442Z,1528909006.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:46.460Z,1528909006.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:49.556Z,1528909009.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:49.574Z,1528909009.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:49.707Z,1528909009.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:49.755Z,1528909009.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:50.132Z,1528909010.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:50.150Z,1528909010.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:50.533Z,1528909010.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:50.556Z,1528909010.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:50.921Z,1528909010.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:50.949Z,1528909010.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:51.315Z,1528909011.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:51.348Z,1528909011.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:51.712Z,1528909011.712 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:51.730Z,1528909011.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:52.111Z,1528909012.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:52.129Z,1528909012.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:52.526Z,1528909012.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:52.559Z,1528909012.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:52.929Z,1528909012.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:52.958Z,1528909012.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:53.326Z,1528909013.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:53.358Z,1528909013.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:53.715Z,1528909013.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:53.732Z,1528909013.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:54.114Z,1528909014.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:54.132Z,1528909014.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:54.514Z,1528909014.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:54.532Z,1528909014.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:54.916Z,1528909014.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:54.940Z,1528909014.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:58.034Z,1528909018.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:58.063Z,1528909018.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:58.157Z,1528909018.157 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0313.lzma
2018-06-13T16:56:58.189Z,1528909018.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:58.258Z,1528909018.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:58.604Z,1528909018.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:58.622Z,1528909018.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:56:58.958Z,1528909018.958 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0313.lzma.bak
2018-06-13T16:56:58.958Z,1528909018.958 [DataOverHttps](INFO): SBD MOMSN=8329579
2018-06-13T16:56:59.017Z,1528909019.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:56:59.040Z,1528909019.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:00.860Z,1528909020.860 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:00.879Z,1528909020.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:00.882Z,1528909020.882 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T16:57:00.882Z,1528909020.882 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T16:57:00.882Z,1528909020.882 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T16:57:00.983Z,1528909020.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:01.025Z,1528909021.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:04.137Z,1528909024.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:04.166Z,1528909024.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:04.285Z,1528909024.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:04.324Z,1528909024.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:04.699Z,1528909024.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:04.717Z,1528909024.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:05.084Z,1528909025.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:05.116Z,1528909025.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:05.475Z,1528909025.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:05.509Z,1528909025.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:05.880Z,1528909025.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:05.914Z,1528909025.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:06.279Z,1528909026.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:06.298Z,1528909026.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:06.689Z,1528909026.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:06.723Z,1528909026.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:07.093Z,1528909027.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:07.127Z,1528909027.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:07.493Z,1528909027.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:07.511Z,1528909027.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:07.884Z,1528909027.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:07.902Z,1528909027.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:08.283Z,1528909028.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:08.301Z,1528909028.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:08.686Z,1528909028.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:08.704Z,1528909028.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:09.084Z,1528909029.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:09.108Z,1528909029.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:09.493Z,1528909029.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:09.511Z,1528909029.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:09.889Z,1528909029.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:09.907Z,1528909029.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:10.291Z,1528909030.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:10.309Z,1528909030.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:10.682Z,1528909030.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:10.700Z,1528909030.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:11.088Z,1528909031.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:11.106Z,1528909031.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:11.490Z,1528909031.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:11.508Z,1528909031.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:11.893Z,1528909031.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:11.911Z,1528909031.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:12.294Z,1528909032.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:12.311Z,1528909032.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:12.681Z,1528909032.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:12.715Z,1528909032.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:13.085Z,1528909033.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:13.103Z,1528909033.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:13.499Z,1528909033.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:13.524Z,1528909033.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:13.898Z,1528909033.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:13.916Z,1528909033.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:14.295Z,1528909034.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:14.313Z,1528909034.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:14.688Z,1528909034.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:14.707Z,1528909034.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:15.075Z,1528909035.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:15.111Z,1528909035.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:15.498Z,1528909035.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:15.520Z,1528909035.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:15.898Z,1528909035.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:15.924Z,1528909035.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:16.298Z,1528909036.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:16.320Z,1528909036.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:16.686Z,1528909036.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:16.704Z,1528909036.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:17.086Z,1528909037.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:17.108Z,1528909037.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:17.495Z,1528909037.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:17.513Z,1528909037.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:17.898Z,1528909037.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:17.920Z,1528909037.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:18.297Z,1528909038.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:18.315Z,1528909038.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:18.676Z,1528909038.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:18.706Z,1528909038.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:19.086Z,1528909039.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:19.104Z,1528909039.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:19.496Z,1528909039.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:19.515Z,1528909039.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:19.895Z,1528909039.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:19.913Z,1528909039.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:20.296Z,1528909040.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:20.314Z,1528909040.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:20.690Z,1528909040.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:20.708Z,1528909040.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:21.074Z,1528909041.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:21.110Z,1528909041.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:21.495Z,1528909041.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:21.513Z,1528909041.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:21.899Z,1528909041.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:21.917Z,1528909041.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:22.298Z,1528909042.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:22.315Z,1528909042.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:22.684Z,1528909042.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:22.702Z,1528909042.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:23.086Z,1528909043.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:23.105Z,1528909043.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:23.475Z,1528909043.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:23.510Z,1528909043.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:23.894Z,1528909043.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:23.913Z,1528909043.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:24.296Z,1528909044.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:24.332Z,1528909044.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:24.688Z,1528909044.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:24.722Z,1528909044.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:25.086Z,1528909045.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:25.103Z,1528909045.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:25.482Z,1528909045.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:25.510Z,1528909045.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:25.887Z,1528909045.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:25.905Z,1528909045.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:26.284Z,1528909046.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:26.301Z,1528909046.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:26.702Z,1528909046.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:26.765Z,1528909046.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:27.095Z,1528909047.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:27.113Z,1528909047.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:27.484Z,1528909047.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:27.610Z,1528909047.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:27.874Z,1528909047.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:27.918Z,1528909047.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:28.275Z,1528909048.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:28.364Z,1528909048.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:28.676Z,1528909048.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:28.721Z,1528909048.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:29.076Z,1528909049.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:29.117Z,1528909049.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:29.478Z,1528909049.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:29.516Z,1528909049.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:29.890Z,1528909049.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:29.918Z,1528909049.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:30.291Z,1528909050.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:30.323Z,1528909050.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:30.689Z,1528909050.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:30.712Z,1528909050.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:31.082Z,1528909051.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:31.114Z,1528909051.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:31.485Z,1528909051.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:31.505Z,1528909051.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:31.876Z,1528909051.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:31.908Z,1528909051.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:32.279Z,1528909052.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:32.318Z,1528909052.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:32.699Z,1528909052.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:32.717Z,1528909052.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:33.090Z,1528909053.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:33.112Z,1528909053.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:33.490Z,1528909053.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:33.541Z,1528909053.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:33.881Z,1528909053.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:33.914Z,1528909053.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:34.271Z,1528909054.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:34.304Z,1528909054.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:34.686Z,1528909054.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:34.703Z,1528909054.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:35.072Z,1528909055.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:35.110Z,1528909055.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:35.471Z,1528909055.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:35.505Z,1528909055.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:35.894Z,1528909055.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:35.912Z,1528909055.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:36.297Z,1528909056.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:36.314Z,1528909056.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:36.687Z,1528909056.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:36.724Z,1528909056.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:37.075Z,1528909057.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:37.107Z,1528909057.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:37.471Z,1528909057.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:37.512Z,1528909057.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:37.873Z,1528909057.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:37.913Z,1528909057.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:38.275Z,1528909058.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:38.319Z,1528909058.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:38.691Z,1528909058.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:38.714Z,1528909058.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:39.092Z,1528909059.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:39.125Z,1528909059.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:39.491Z,1528909059.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:39.515Z,1528909059.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:39.871Z,1528909059.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:39.901Z,1528909059.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:40.275Z,1528909060.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:40.307Z,1528909060.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:40.675Z,1528909060.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:40.711Z,1528909060.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:41.072Z,1528909061.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:41.108Z,1528909061.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:41.475Z,1528909061.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:41.510Z,1528909061.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:41.891Z,1528909061.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:41.914Z,1528909061.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:42.285Z,1528909062.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:42.324Z,1528909062.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:42.682Z,1528909062.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:42.720Z,1528909062.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:43.075Z,1528909063.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:43.120Z,1528909063.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:43.471Z,1528909063.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:43.488Z,1528909063.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:43.872Z,1528909063.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:43.918Z,1528909063.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:44.279Z,1528909064.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:44.321Z,1528909064.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:44.693Z,1528909064.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:44.725Z,1528909064.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:45.093Z,1528909065.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:45.125Z,1528909065.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:45.495Z,1528909065.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:45.526Z,1528909065.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:45.879Z,1528909065.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:45.920Z,1528909065.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:46.280Z,1528909066.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:46.327Z,1528909066.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:46.679Z,1528909066.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:46.697Z,1528909066.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:47.079Z,1528909067.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:47.099Z,1528909067.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:47.478Z,1528909067.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:47.501Z,1528909067.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:47.889Z,1528909067.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:47.929Z,1528909067.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:48.290Z,1528909068.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:48.334Z,1528909068.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:48.681Z,1528909068.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:48.703Z,1528909068.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:49.078Z,1528909069.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:49.104Z,1528909069.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:49.478Z,1528909069.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:49.496Z,1528909069.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:49.878Z,1528909069.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:49.895Z,1528909069.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:50.280Z,1528909070.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:50.298Z,1528909070.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:50.690Z,1528909070.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:50.712Z,1528909070.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:51.085Z,1528909071.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:51.132Z,1528909071.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:51.486Z,1528909071.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:51.504Z,1528909071.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:51.881Z,1528909071.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:51.899Z,1528909071.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:52.280Z,1528909072.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:52.304Z,1528909072.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:52.680Z,1528909072.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:52.704Z,1528909072.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:53.082Z,1528909073.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:53.100Z,1528909073.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:53.477Z,1528909073.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:53.495Z,1528909073.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:53.887Z,1528909073.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:53.910Z,1528909073.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:54.289Z,1528909074.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:54.307Z,1528909074.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:54.686Z,1528909074.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:54.704Z,1528909074.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:55.079Z,1528909075.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:55.116Z,1528909075.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:55.482Z,1528909075.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:55.503Z,1528909075.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:55.880Z,1528909075.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:55.898Z,1528909075.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:56.279Z,1528909076.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:56.310Z,1528909076.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:56.689Z,1528909076.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:56.708Z,1528909076.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:57.086Z,1528909077.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:57.112Z,1528909077.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:57.490Z,1528909077.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:57.507Z,1528909077.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:57.884Z,1528909077.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:57.902Z,1528909077.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:58.275Z,1528909078.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:58.299Z,1528909078.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:58.679Z,1528909078.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:58.704Z,1528909078.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:59.083Z,1528909079.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:59.101Z,1528909079.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:59.475Z,1528909079.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:59.500Z,1528909079.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:57:59.891Z,1528909079.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:57:59.909Z,1528909079.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:00.295Z,1528909080.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:00.318Z,1528909080.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:00.695Z,1528909080.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:00.713Z,1528909080.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:01.085Z,1528909081.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:01.108Z,1528909081.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:01.482Z,1528909081.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:01.513Z,1528909081.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:01.883Z,1528909081.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:01.902Z,1528909081.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:02.285Z,1528909082.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:02.302Z,1528909082.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:02.697Z,1528909082.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:02.716Z,1528909082.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:03.095Z,1528909083.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:03.113Z,1528909083.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:03.498Z,1528909083.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:03.524Z,1528909083.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:03.875Z,1528909083.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:03.914Z,1528909083.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:04.275Z,1528909084.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:04.316Z,1528909084.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:04.679Z,1528909084.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:04.713Z,1528909084.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:05.076Z,1528909085.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:05.106Z,1528909085.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:08.189Z,1528909088.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:08.212Z,1528909088.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:08.332Z,1528909088.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:08.372Z,1528909088.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:08.742Z,1528909088.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:08.798Z,1528909088.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:09.147Z,1528909089.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:09.195Z,1528909089.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:09.523Z,1528909089.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:09.560Z,1528909089.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:09.921Z,1528909089.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:09.954Z,1528909089.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:10.316Z,1528909090.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:10.362Z,1528909090.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:10.742Z,1528909090.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:10.765Z,1528909090.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:11.129Z,1528909091.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:11.168Z,1528909091.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:11.532Z,1528909091.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:11.568Z,1528909091.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:11.920Z,1528909091.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:11.971Z,1528909091.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:12.315Z,1528909092.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:12.334Z,1528909092.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:12.715Z,1528909092.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:12.734Z,1528909092.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:13.124Z,1528909093.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:13.164Z,1528909093.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:13.521Z,1528909093.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:13.575Z,1528909093.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:13.929Z,1528909093.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:13.974Z,1528909093.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:14.333Z,1528909094.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:14.371Z,1528909094.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:14.735Z,1528909094.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:14.773Z,1528909094.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:15.118Z,1528909095.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:15.173Z,1528909095.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:15.522Z,1528909095.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:15.540Z,1528909095.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:15.925Z,1528909095.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:15.948Z,1528909095.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:16.322Z,1528909096.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:16.344Z,1528909096.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:16.729Z,1528909096.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:16.747Z,1528909096.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:17.130Z,1528909097.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:17.148Z,1528909097.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:17.530Z,1528909097.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:17.553Z,1528909097.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:17.925Z,1528909097.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:17.947Z,1528909097.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:18.323Z,1528909098.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:18.340Z,1528909098.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:18.719Z,1528909098.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:18.742Z,1528909098.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:19.123Z,1528909099.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:19.166Z,1528909099.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:19.521Z,1528909099.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:19.544Z,1528909099.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:19.934Z,1528909099.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:19.952Z,1528909099.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:20.339Z,1528909100.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:20.358Z,1528909100.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:20.738Z,1528909100.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:20.761Z,1528909100.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:21.115Z,1528909101.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:21.159Z,1528909101.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:21.524Z,1528909101.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:21.542Z,1528909101.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:21.926Z,1528909101.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:21.943Z,1528909101.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:22.315Z,1528909102.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:22.342Z,1528909102.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:22.735Z,1528909102.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:22.758Z,1528909102.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:23.139Z,1528909103.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:23.156Z,1528909103.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:23.531Z,1528909103.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:23.549Z,1528909103.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:23.923Z,1528909103.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:23.946Z,1528909103.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:24.325Z,1528909104.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:24.345Z,1528909104.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:24.715Z,1528909104.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:24.751Z,1528909104.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:25.121Z,1528909105.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:25.146Z,1528909105.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:25.515Z,1528909105.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:25.543Z,1528909105.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:25.935Z,1528909105.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:25.958Z,1528909105.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:26.338Z,1528909106.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:26.355Z,1528909106.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:26.735Z,1528909106.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:26.760Z,1528909106.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:27.125Z,1528909107.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:27.143Z,1528909107.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:27.525Z,1528909107.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:27.542Z,1528909107.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:27.926Z,1528909107.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:27.944Z,1528909107.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:28.315Z,1528909108.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:28.353Z,1528909108.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:28.736Z,1528909108.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:28.754Z,1528909108.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:29.136Z,1528909109.136 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:29.159Z,1528909109.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:29.535Z,1528909109.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:29.553Z,1528909109.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:29.919Z,1528909109.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:29.956Z,1528909109.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:30.319Z,1528909110.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:30.352Z,1528909110.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:30.716Z,1528909110.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:30.761Z,1528909110.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:31.120Z,1528909111.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:31.163Z,1528909111.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:31.519Z,1528909111.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:31.556Z,1528909111.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:31.940Z,1528909111.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:31.958Z,1528909111.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:32.339Z,1528909112.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:32.361Z,1528909112.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:32.741Z,1528909112.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:32.758Z,1528909112.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:33.119Z,1528909113.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:33.156Z,1528909113.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:33.519Z,1528909113.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:33.555Z,1528909113.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:33.919Z,1528909113.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:33.960Z,1528909113.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:34.319Z,1528909114.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:34.356Z,1528909114.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:34.736Z,1528909114.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:34.754Z,1528909114.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:35.139Z,1528909115.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:35.169Z,1528909115.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:35.540Z,1528909115.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:35.558Z,1528909115.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:35.919Z,1528909115.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:35.955Z,1528909115.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:36.319Z,1528909116.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:36.352Z,1528909116.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:36.719Z,1528909116.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:36.756Z,1528909116.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:37.120Z,1528909117.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:37.154Z,1528909117.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:37.519Z,1528909117.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:37.562Z,1528909117.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:37.929Z,1528909117.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:37.956Z,1528909117.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:38.333Z,1528909118.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:38.368Z,1528909118.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:38.733Z,1528909118.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:38.762Z,1528909118.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:39.119Z,1528909119.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:39.159Z,1528909119.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:39.159Z,1528909119.159 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 270
2018-06-13T16:58:39.159Z,1528909119.159 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T16:58:39.161Z,1528909119.161 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:39.161Z,1528909119.161 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 270
2018-06-13T16:58:39.161Z,1528909119.161 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T16:58:39.163Z,1528909119.163 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:39.163Z,1528909119.163 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 270
2018-06-13T16:58:39.163Z,1528909119.163 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T16:58:39.237Z,1528909119.237 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T16:58:39.237Z,1528909119.237 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T16:58:39.238Z,1528909119.238 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T16:58:39.522Z,1528909119.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:39.625Z,1528909119.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T16:58:39.625Z,1528909119.625 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 270
2018-06-13T16:58:39.626Z,1528909119.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T16:58:39.626Z,1528909119.626 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 270
2018-06-13T16:58:39.626Z,1528909119.626 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T16:58:39.626Z,1528909119.626 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 270
2018-06-13T16:58:39.926Z,1528909119.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:39.951Z,1528909119.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T16:58:39.951Z,1528909119.951 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:58:39.952Z,1528909119.952 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:58:39.952Z,1528909119.952 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T16:58:39.953Z,1528909119.953 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:58:39.953Z,1528909119.953 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:58:39.953Z,1528909119.953 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T16:58:39.954Z,1528909119.954 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T16:58:39.954Z,1528909119.954 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T16:58:40.330Z,1528909120.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:40.352Z,1528909120.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T16:58:40.353Z,1528909120.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:40.738Z,1528909120.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:40.760Z,1528909120.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T16:58:40.761Z,1528909120.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:41.140Z,1528909121.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:41.163Z,1528909121.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T16:58:41.164Z,1528909121.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:41.543Z,1528909121.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:41.561Z,1528909121.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T16:58:41.562Z,1528909121.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:41.919Z,1528909121.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:41.955Z,1528909121.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T16:58:41.956Z,1528909121.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:42.329Z,1528909122.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:42.346Z,1528909122.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T16:58:42.347Z,1528909122.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:42.719Z,1528909122.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:42.755Z,1528909122.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T16:58:42.756Z,1528909122.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:43.120Z,1528909123.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:43.155Z,1528909123.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T16:58:43.156Z,1528909123.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:43.519Z,1528909123.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:43.555Z,1528909123.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T16:58:43.556Z,1528909123.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:43.940Z,1528909123.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:43.957Z,1528909123.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T16:58:43.958Z,1528909123.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:44.339Z,1528909124.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:44.358Z,1528909124.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T16:58:44.359Z,1528909124.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:44.740Z,1528909124.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:44.758Z,1528909124.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T16:58:44.758Z,1528909124.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:45.119Z,1528909125.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:45.156Z,1528909125.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T16:58:45.157Z,1528909125.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:45.519Z,1528909125.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:45.548Z,1528909125.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T16:58:45.550Z,1528909125.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:45.915Z,1528909125.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:45.948Z,1528909125.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T16:58:45.949Z,1528909125.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:46.319Z,1528909126.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:46.345Z,1528909126.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T16:58:46.346Z,1528909126.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:46.702Z,1528909126.702 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T16:58:46.702Z,1528909126.702 [NAL9602] Data Fault, FailCount= 4
2018-06-13T16:58:46.702Z,1528909126.702 [NAL9602](ERROR): Data Fault
2018-06-13T16:58:46.719Z,1528909126.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:46.760Z,1528909126.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T16:58:46.766Z,1528909126.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:46.861Z,1528909126.861 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T16:58:47.102Z,1528909127.102 [NAL9602](INFO): Powering down
2018-06-13T16:58:47.119Z,1528909127.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:47.157Z,1528909127.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T16:58:47.158Z,1528909127.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:47.519Z,1528909127.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:47.556Z,1528909127.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T16:58:47.557Z,1528909127.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:47.917Z,1528909127.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:47.952Z,1528909127.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T16:58:47.957Z,1528909127.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:48.045Z,1528909128.045 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T16:58:48.045Z,1528909128.045 [NAL9602] No Fault, FailCount= 4
2018-06-13T16:58:48.315Z,1528909128.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:48.359Z,1528909128.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T16:58:48.360Z,1528909128.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:48.715Z,1528909128.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:48.740Z,1528909128.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T16:58:48.757Z,1528909128.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:49.122Z,1528909129.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:49.140Z,1528909129.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T16:58:49.141Z,1528909129.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:49.522Z,1528909129.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:49.539Z,1528909129.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T16:58:49.540Z,1528909129.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:49.923Z,1528909129.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:49.941Z,1528909129.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T16:58:49.942Z,1528909129.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:50.322Z,1528909130.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:50.340Z,1528909130.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T16:58:50.341Z,1528909130.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:50.726Z,1528909130.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:50.743Z,1528909130.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T16:58:50.744Z,1528909130.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:51.121Z,1528909131.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:51.139Z,1528909131.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T16:58:51.140Z,1528909131.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:51.525Z,1528909131.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:51.543Z,1528909131.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T16:58:51.543Z,1528909131.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:51.926Z,1528909131.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:51.943Z,1528909131.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T16:58:51.944Z,1528909131.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:52.324Z,1528909132.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:52.342Z,1528909132.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T16:58:52.343Z,1528909132.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:52.724Z,1528909132.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:52.743Z,1528909132.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T16:58:52.743Z,1528909132.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:53.123Z,1528909133.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:53.141Z,1528909133.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T16:58:53.142Z,1528909133.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:53.520Z,1528909133.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:53.538Z,1528909133.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T16:58:53.539Z,1528909133.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:53.924Z,1528909133.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:53.943Z,1528909133.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T16:58:53.944Z,1528909133.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:54.323Z,1528909134.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:54.340Z,1528909134.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T16:58:54.341Z,1528909134.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:54.721Z,1528909134.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:54.739Z,1528909134.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T16:58:54.740Z,1528909134.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:55.124Z,1528909135.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:55.142Z,1528909135.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T16:58:55.143Z,1528909135.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:55.523Z,1528909135.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:55.540Z,1528909135.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T16:58:55.541Z,1528909135.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:55.924Z,1528909135.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:55.942Z,1528909135.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T16:58:55.943Z,1528909135.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:56.324Z,1528909136.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:56.341Z,1528909136.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T16:58:56.342Z,1528909136.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:56.725Z,1528909136.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:56.742Z,1528909136.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T16:58:56.743Z,1528909136.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:57.120Z,1528909137.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:57.138Z,1528909137.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T16:58:57.139Z,1528909137.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:57.525Z,1528909137.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:57.542Z,1528909137.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T16:58:57.543Z,1528909137.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:57.925Z,1528909137.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:57.942Z,1528909137.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T16:58:57.943Z,1528909137.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:58.325Z,1528909138.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:58.342Z,1528909138.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T16:58:58.343Z,1528909138.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:58.724Z,1528909138.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:58.742Z,1528909138.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T16:58:58.743Z,1528909138.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:59.120Z,1528909139.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:59.143Z,1528909139.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T16:58:59.144Z,1528909139.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:59.521Z,1528909139.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:59.539Z,1528909139.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:58:59.924Z,1528909139.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:58:59.942Z,1528909139.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:00.324Z,1528909140.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:00.341Z,1528909140.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:00.720Z,1528909140.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:00.738Z,1528909140.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:01.128Z,1528909141.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:01.146Z,1528909141.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:01.526Z,1528909141.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:01.548Z,1528909141.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:04.647Z,1528909144.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:04.678Z,1528909144.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:04.795Z,1528909144.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:04.847Z,1528909144.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:05.198Z,1528909145.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:05.237Z,1528909145.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:05.595Z,1528909145.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:05.627Z,1528909145.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:05.998Z,1528909145.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:06.040Z,1528909146.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:06.394Z,1528909146.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:06.412Z,1528909146.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:06.792Z,1528909146.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:06.810Z,1528909146.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:07.201Z,1528909147.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:07.222Z,1528909147.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:07.597Z,1528909147.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:07.620Z,1528909147.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:07.997Z,1528909147.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:08.015Z,1528909148.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:08.401Z,1528909148.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:08.419Z,1528909148.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:08.801Z,1528909148.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:08.818Z,1528909148.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:09.196Z,1528909149.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:09.219Z,1528909149.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:09.602Z,1528909149.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:09.620Z,1528909149.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:10.004Z,1528909150.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:10.021Z,1528909150.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:10.397Z,1528909150.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:10.415Z,1528909150.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:10.804Z,1528909150.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:10.827Z,1528909150.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:11.200Z,1528909151.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:11.224Z,1528909151.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:11.596Z,1528909151.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:11.615Z,1528909151.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:11.999Z,1528909151.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:12.021Z,1528909152.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:12.400Z,1528909152.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:12.421Z,1528909152.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:12.797Z,1528909152.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:12.815Z,1528909152.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:13.204Z,1528909153.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:13.222Z,1528909153.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:13.600Z,1528909153.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:13.618Z,1528909153.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:13.000Z,1528909154.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:14.018Z,1528909154.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:14.399Z,1528909154.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:14.431Z,1528909154.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:14.804Z,1528909154.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:14.821Z,1528909154.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:15.196Z,1528909155.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:15.214Z,1528909155.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:15.604Z,1528909155.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:15.624Z,1528909155.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:16.004Z,1528909156.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:16.021Z,1528909156.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:16.401Z,1528909156.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:16.419Z,1528909156.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:16.804Z,1528909156.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:16.822Z,1528909156.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:17.178Z,1528909157.178 [NAL9602](INFO): Powering up NAL9602
2018-06-13T16:59:17.199Z,1528909157.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:17.250Z,1528909157.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:17.595Z,1528909157.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:17.613Z,1528909157.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:18.005Z,1528909158.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:18.022Z,1528909158.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:18.404Z,1528909158.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:18.422Z,1528909158.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:18.804Z,1528909158.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:18.822Z,1528909158.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:19.205Z,1528909159.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:19.223Z,1528909159.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:19.604Z,1528909159.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:19.621Z,1528909159.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:20.000Z,1528909160.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:20.018Z,1528909160.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:20.398Z,1528909160.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:20.435Z,1528909160.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:20.804Z,1528909160.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:20.822Z,1528909160.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:21.201Z,1528909161.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:21.219Z,1528909161.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:21.604Z,1528909161.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:21.622Z,1528909161.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:22.001Z,1528909162.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:22.024Z,1528909162.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:22.390Z,1528909162.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:22.426Z,1528909162.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:22.798Z,1528909162.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:22.820Z,1528909162.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:23.200Z,1528909163.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:23.218Z,1528909163.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:23.590Z,1528909163.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:23.626Z,1528909163.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:24.004Z,1528909164.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:24.022Z,1528909164.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:24.400Z,1528909164.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:24.418Z,1528909164.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:24.794Z,1528909164.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:24.824Z,1528909164.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:25.199Z,1528909165.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:25.225Z,1528909165.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:25.594Z,1528909165.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:25.627Z,1528909165.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:25.995Z,1528909165.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:26.029Z,1528909166.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:26.398Z,1528909166.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:26.431Z,1528909166.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:26.798Z,1528909166.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:26.831Z,1528909166.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:27.191Z,1528909167.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:27.208Z,1528909167.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:27.598Z,1528909167.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:27.632Z,1528909167.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:28.010Z,1528909168.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:28.038Z,1528909168.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:28.383Z,1528909168.383 [NAL9602](INFO): NAL9602 initialized
2018-06-13T16:59:28.400Z,1528909168.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:28.438Z,1528909168.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:28.799Z,1528909168.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:28.817Z,1528909168.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:29.209Z,1528909169.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:29.244Z,1528909169.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:29.610Z,1528909169.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:29.642Z,1528909169.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:30.010Z,1528909170.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:30.053Z,1528909170.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:30.395Z,1528909170.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:30.414Z,1528909170.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:30.800Z,1528909170.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:30.818Z,1528909170.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:31.195Z,1528909171.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:31.214Z,1528909171.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:31.602Z,1528909171.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:31.628Z,1528909171.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:32.006Z,1528909172.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:32.024Z,1528909172.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:32.413Z,1528909172.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:32.431Z,1528909172.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:32.814Z,1528909172.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:32.833Z,1528909172.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:33.202Z,1528909173.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:33.220Z,1528909173.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:33.605Z,1528909173.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:33.623Z,1528909173.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:34.007Z,1528909174.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:34.025Z,1528909174.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:34.403Z,1528909174.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:34.420Z,1528909174.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:34.805Z,1528909174.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:34.824Z,1528909174.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:35.215Z,1528909175.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:35.233Z,1528909175.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:35.616Z,1528909175.616 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:35.634Z,1528909175.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:36.014Z,1528909176.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:36.036Z,1528909176.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:36.399Z,1528909176.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:36.425Z,1528909176.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:36.803Z,1528909176.803 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:36.821Z,1528909176.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:37.196Z,1528909177.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:37.231Z,1528909177.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:37.600Z,1528909177.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:37.631Z,1528909177.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:38.013Z,1528909178.013 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:38.039Z,1528909178.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:38.420Z,1528909178.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:38.438Z,1528909178.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:38.820Z,1528909178.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:38.838Z,1528909178.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:39.195Z,1528909179.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:39.223Z,1528909179.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:39.599Z,1528909179.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:39.636Z,1528909179.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:39.999Z,1528909179.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:40.029Z,1528909180.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:40.396Z,1528909180.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:40.429Z,1528909180.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:40.799Z,1528909180.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:40.835Z,1528909180.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:41.220Z,1528909181.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:41.238Z,1528909181.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:41.615Z,1528909181.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:41.633Z,1528909181.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:42.015Z,1528909182.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:42.033Z,1528909182.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:42.396Z,1528909182.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:42.432Z,1528909182.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:42.799Z,1528909182.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:42.832Z,1528909182.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:43.199Z,1528909183.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:43.238Z,1528909183.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:43.591Z,1528909183.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:43.610Z,1528909183.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:44.005Z,1528909184.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:44.039Z,1528909184.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:44.410Z,1528909184.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:44.437Z,1528909184.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:44.814Z,1528909184.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:44.842Z,1528909184.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:45.195Z,1528909185.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:45.213Z,1528909185.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:45.599Z,1528909185.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:45.616Z,1528909185.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:45.998Z,1528909185.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:46.046Z,1528909186.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:46.398Z,1528909186.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:46.416Z,1528909186.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:46.798Z,1528909186.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:46.816Z,1528909186.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:47.209Z,1528909187.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:47.248Z,1528909187.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:47.609Z,1528909187.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:47.642Z,1528909187.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:48.009Z,1528909188.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:48.042Z,1528909188.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:48.398Z,1528909188.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:48.416Z,1528909188.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:48.798Z,1528909188.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:48.816Z,1528909188.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:49.198Z,1528909189.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:49.240Z,1528909189.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:49.598Z,1528909189.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:49.616Z,1528909189.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:50.005Z,1528909190.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:50.023Z,1528909190.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:50.409Z,1528909190.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:50.427Z,1528909190.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:50.813Z,1528909190.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:50.847Z,1528909190.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:51.201Z,1528909191.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:51.219Z,1528909191.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:51.600Z,1528909191.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:51.618Z,1528909191.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:51.000Z,1528909192.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:52.030Z,1528909192.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:52.395Z,1528909192.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:52.418Z,1528909192.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:52.804Z,1528909192.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:52.821Z,1528909192.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:53.209Z,1528909193.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:53.228Z,1528909193.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:53.609Z,1528909193.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:53.627Z,1528909193.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:54.007Z,1528909194.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:54.025Z,1528909194.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:54.402Z,1528909194.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:54.420Z,1528909194.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:54.802Z,1528909194.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:54.820Z,1528909194.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:55.202Z,1528909195.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:55.219Z,1528909195.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:55.601Z,1528909195.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:55.619Z,1528909195.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:56.006Z,1528909196.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:56.025Z,1528909196.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:56.409Z,1528909196.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:56.427Z,1528909196.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:56.813Z,1528909196.813 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:56.831Z,1528909196.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:57.195Z,1528909197.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:57.218Z,1528909197.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:57.599Z,1528909197.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:57.621Z,1528909197.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:58.002Z,1528909198.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:58.020Z,1528909198.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:58.402Z,1528909198.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:58.419Z,1528909198.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:58.805Z,1528909198.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:58.823Z,1528909198.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:59.209Z,1528909199.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:59.228Z,1528909199.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T16:59:59.606Z,1528909199.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T16:59:59.628Z,1528909199.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:00.006Z,1528909200.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:00.024Z,1528909200.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:00.402Z,1528909200.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:00.420Z,1528909200.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:00.801Z,1528909200.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:00.820Z,1528909200.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:01.205Z,1528909201.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:01.223Z,1528909201.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:01.606Z,1528909201.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:01.624Z,1528909201.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:04.725Z,1528909204.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:04.760Z,1528909204.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:04.900Z,1528909204.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:04.953Z,1528909204.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:05.302Z,1528909205.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:05.355Z,1528909205.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:05.679Z,1528909205.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:05.724Z,1528909205.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:06.074Z,1528909206.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:06.111Z,1528909206.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:06.475Z,1528909206.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:06.506Z,1528909206.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:06.886Z,1528909206.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:06.921Z,1528909206.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:07.294Z,1528909207.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:07.317Z,1528909207.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:07.694Z,1528909207.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:07.719Z,1528909207.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:08.076Z,1528909208.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:08.111Z,1528909208.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:08.475Z,1528909208.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:08.520Z,1528909208.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:08.890Z,1528909208.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:08.930Z,1528909208.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:09.290Z,1528909209.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:09.326Z,1528909209.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:09.686Z,1528909209.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:09.713Z,1528909209.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:10.076Z,1528909210.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:10.121Z,1528909210.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:10.475Z,1528909210.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:10.513Z,1528909210.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:10.886Z,1528909210.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:10.919Z,1528909210.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:11.289Z,1528909211.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:11.321Z,1528909211.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:11.686Z,1528909211.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:11.727Z,1528909211.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:12.079Z,1528909212.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:12.110Z,1528909212.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:12.479Z,1528909212.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:12.520Z,1528909212.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:12.890Z,1528909212.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:12.931Z,1528909212.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:13.289Z,1528909213.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:13.308Z,1528909213.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:13.690Z,1528909213.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:13.708Z,1528909213.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:14.075Z,1528909214.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:14.099Z,1528909214.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:14.479Z,1528909214.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:14.505Z,1528909214.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:14.886Z,1528909214.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:14.904Z,1528909214.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:15.291Z,1528909215.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:15.309Z,1528909215.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:15.695Z,1528909215.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:15.713Z,1528909215.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:16.094Z,1528909216.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:16.116Z,1528909216.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:16.471Z,1528909216.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:16.508Z,1528909216.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:16.875Z,1528909216.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:16.912Z,1528909216.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:17.276Z,1528909217.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:17.314Z,1528909217.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:17.675Z,1528909217.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:17.705Z,1528909217.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:18.090Z,1528909218.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:18.114Z,1528909218.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:18.497Z,1528909218.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:18.515Z,1528909218.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:18.887Z,1528909218.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:18.912Z,1528909218.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:19.275Z,1528909219.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:19.311Z,1528909219.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:19.675Z,1528909219.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:19.710Z,1528909219.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:20.075Z,1528909220.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:20.113Z,1528909220.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:20.476Z,1528909220.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:20.511Z,1528909220.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:20.875Z,1528909220.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:20.913Z,1528909220.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:21.281Z,1528909221.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:21.315Z,1528909221.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:21.695Z,1528909221.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:21.713Z,1528909221.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:22.097Z,1528909222.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:22.115Z,1528909222.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:22.475Z,1528909222.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:22.513Z,1528909222.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:22.879Z,1528909222.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:22.908Z,1528909222.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:23.277Z,1528909223.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:23.307Z,1528909223.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:23.675Z,1528909223.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:23.707Z,1528909223.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:24.093Z,1528909224.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:24.111Z,1528909224.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:24.489Z,1528909224.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:24.515Z,1528909224.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:24.882Z,1528909224.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:24.919Z,1528909224.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:25.276Z,1528909225.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:25.308Z,1528909225.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:25.675Z,1528909225.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:25.709Z,1528909225.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:26.075Z,1528909226.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:26.108Z,1528909226.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:26.475Z,1528909226.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:26.512Z,1528909226.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:26.871Z,1528909226.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:26.888Z,1528909226.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:27.285Z,1528909227.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:27.315Z,1528909227.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:27.689Z,1528909227.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:27.720Z,1528909227.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:28.089Z,1528909228.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:28.127Z,1528909228.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:28.471Z,1528909228.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:28.489Z,1528909228.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:28.875Z,1528909228.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:28.892Z,1528909228.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:29.275Z,1528909229.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:29.293Z,1528909229.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:29.674Z,1528909229.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:29.692Z,1528909229.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:30.089Z,1528909230.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:30.123Z,1528909230.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:30.485Z,1528909230.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:30.502Z,1528909230.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:30.889Z,1528909230.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:30.907Z,1528909230.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:31.279Z,1528909231.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:31.297Z,1528909231.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:31.680Z,1528909231.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:31.698Z,1528909231.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:32.075Z,1528909232.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:32.109Z,1528909232.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:32.479Z,1528909232.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:32.510Z,1528909232.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:32.878Z,1528909232.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:32.895Z,1528909232.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:33.286Z,1528909233.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:33.304Z,1528909233.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:33.689Z,1528909233.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:33.707Z,1528909233.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:34.086Z,1528909234.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:34.105Z,1528909234.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:34.474Z,1528909234.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:34.504Z,1528909234.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:34.882Z,1528909234.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:34.899Z,1528909234.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:35.282Z,1528909235.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:35.300Z,1528909235.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:35.675Z,1528909235.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:35.698Z,1528909235.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:36.090Z,1528909236.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:36.108Z,1528909236.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:36.490Z,1528909236.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:36.508Z,1528909236.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:36.888Z,1528909236.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:36.906Z,1528909236.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:37.281Z,1528909237.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:37.299Z,1528909237.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:37.682Z,1528909237.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:37.699Z,1528909237.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:38.081Z,1528909238.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:38.099Z,1528909238.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:38.481Z,1528909238.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:38.499Z,1528909238.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:38.877Z,1528909238.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:38.895Z,1528909238.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:39.290Z,1528909239.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:39.316Z,1528909239.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:39.690Z,1528909239.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:39.712Z,1528909239.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:40.090Z,1528909240.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:40.108Z,1528909240.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:40.481Z,1528909240.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:40.499Z,1528909240.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:40.874Z,1528909240.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:40.906Z,1528909240.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:41.282Z,1528909241.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:41.299Z,1528909241.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:41.674Z,1528909241.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:41.707Z,1528909241.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:42.090Z,1528909242.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:42.107Z,1528909242.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:42.491Z,1528909242.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:42.508Z,1528909242.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:42.890Z,1528909242.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:42.912Z,1528909242.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:43.281Z,1528909243.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:43.298Z,1528909243.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:43.677Z,1528909243.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:43.700Z,1528909243.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:44.081Z,1528909244.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:44.099Z,1528909244.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:44.480Z,1528909244.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:44.507Z,1528909244.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:44.881Z,1528909244.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:44.899Z,1528909244.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:45.290Z,1528909245.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:45.308Z,1528909245.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:45.690Z,1528909245.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:45.712Z,1528909245.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:46.091Z,1528909246.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:46.108Z,1528909246.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:46.482Z,1528909246.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:46.504Z,1528909246.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:46.879Z,1528909246.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:46.901Z,1528909246.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:47.281Z,1528909247.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:47.299Z,1528909247.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:47.674Z,1528909247.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:47.706Z,1528909247.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:48.090Z,1528909248.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:48.108Z,1528909248.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:48.491Z,1528909248.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:48.516Z,1528909248.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:48.890Z,1528909248.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:48.912Z,1528909248.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:49.282Z,1528909249.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:49.299Z,1528909249.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:49.682Z,1528909249.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:49.699Z,1528909249.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:50.081Z,1528909250.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:50.104Z,1528909250.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:50.479Z,1528909250.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:50.503Z,1528909250.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:50.879Z,1528909250.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:50.903Z,1528909250.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:51.292Z,1528909251.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:51.310Z,1528909251.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:51.690Z,1528909251.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:51.712Z,1528909251.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:52.091Z,1528909252.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:52.116Z,1528909252.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:52.481Z,1528909252.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:52.499Z,1528909252.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:52.879Z,1528909252.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:52.909Z,1528909252.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:53.279Z,1528909253.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:53.309Z,1528909253.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:53.675Z,1528909253.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:53.708Z,1528909253.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:54.096Z,1528909254.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:54.114Z,1528909254.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:54.496Z,1528909254.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:54.514Z,1528909254.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:54.892Z,1528909254.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:54.916Z,1528909254.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:55.275Z,1528909255.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:55.303Z,1528909255.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:55.675Z,1528909255.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:55.705Z,1528909255.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:56.076Z,1528909256.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:56.116Z,1528909256.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:56.476Z,1528909256.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:56.508Z,1528909256.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:56.875Z,1528909256.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:56.912Z,1528909256.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:57.291Z,1528909257.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:57.316Z,1528909257.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:57.695Z,1528909257.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:57.714Z,1528909257.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:58.097Z,1528909258.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:58.116Z,1528909258.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:58.475Z,1528909258.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:58.502Z,1528909258.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:58.875Z,1528909258.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:58.902Z,1528909258.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:59.276Z,1528909259.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:59.305Z,1528909259.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:00:59.675Z,1528909259.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:00:59.702Z,1528909259.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:00.092Z,1528909260.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:00.111Z,1528909260.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:00.497Z,1528909260.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:00.516Z,1528909260.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:00.892Z,1528909260.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:00.910Z,1528909260.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:01.279Z,1528909261.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:01.306Z,1528909261.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:01.679Z,1528909261.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:01.709Z,1528909261.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:04.799Z,1528909264.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:04.818Z,1528909264.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:04.927Z,1528909264.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:04.976Z,1528909264.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:05.349Z,1528909265.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:05.367Z,1528909265.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:05.748Z,1528909265.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:05.766Z,1528909265.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:06.147Z,1528909266.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:06.166Z,1528909266.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:06.525Z,1528909266.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:06.610Z,1528909266.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:06.928Z,1528909266.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:06.964Z,1528909266.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:07.328Z,1528909267.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:07.359Z,1528909267.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:07.728Z,1528909267.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:07.770Z,1528909267.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:08.134Z,1528909268.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:08.164Z,1528909268.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:08.542Z,1528909268.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:08.576Z,1528909268.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:08.943Z,1528909268.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:08.974Z,1528909268.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:09.323Z,1528909269.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:09.342Z,1528909269.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:09.727Z,1528909269.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:09.745Z,1528909269.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:10.131Z,1528909270.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:10.150Z,1528909270.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:10.527Z,1528909270.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:10.544Z,1528909270.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:10.930Z,1528909270.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:10.948Z,1528909270.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:11.341Z,1528909271.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:11.376Z,1528909271.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:11.745Z,1528909271.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:11.780Z,1528909271.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:12.138Z,1528909272.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:12.155Z,1528909272.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:12.534Z,1528909272.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:12.552Z,1528909272.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:12.927Z,1528909272.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:12.950Z,1528909272.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:13.337Z,1528909273.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:13.355Z,1528909273.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:13.735Z,1528909273.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:13.753Z,1528909273.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:14.138Z,1528909274.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:14.156Z,1528909274.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:14.542Z,1528909274.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:14.564Z,1528909274.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:14.942Z,1528909274.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:14.968Z,1528909274.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:15.333Z,1528909275.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:15.351Z,1528909275.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:15.731Z,1528909275.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:15.755Z,1528909275.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:16.131Z,1528909276.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:16.156Z,1528909276.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:16.530Z,1528909276.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:16.548Z,1528909276.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:16.923Z,1528909276.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:16.959Z,1528909276.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:17.346Z,1528909277.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:17.365Z,1528909277.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:17.747Z,1528909277.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:17.766Z,1528909277.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:18.143Z,1528909278.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:18.161Z,1528909278.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:18.529Z,1528909278.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:18.560Z,1528909278.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:18.927Z,1528909278.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:18.957Z,1528909278.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:19.326Z,1528909279.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:19.352Z,1528909279.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:19.731Z,1528909279.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:19.765Z,1528909279.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:20.143Z,1528909280.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:20.161Z,1528909280.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:20.548Z,1528909280.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:20.572Z,1528909280.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:20.948Z,1528909280.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:20.966Z,1528909280.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:21.327Z,1528909281.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:21.354Z,1528909281.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:21.727Z,1528909281.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:21.754Z,1528909281.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:22.127Z,1528909282.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:22.162Z,1528909282.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:22.527Z,1528909282.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:22.560Z,1528909282.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:22.927Z,1528909282.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:22.965Z,1528909282.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:23.352Z,1528909283.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:23.370Z,1528909283.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:23.747Z,1528909283.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:23.765Z,1528909283.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:24.137Z,1528909284.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:24.172Z,1528909284.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:24.527Z,1528909284.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:24.554Z,1528909284.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:24.923Z,1528909284.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:24.941Z,1528909284.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:25.328Z,1528909285.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:25.346Z,1528909285.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:25.728Z,1528909285.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:25.758Z,1528909285.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:26.134Z,1528909286.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:26.152Z,1528909286.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:26.541Z,1528909286.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:26.575Z,1528909286.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:26.942Z,1528909286.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:26.959Z,1528909286.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:27.333Z,1528909287.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:27.351Z,1528909287.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:27.732Z,1528909287.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:27.750Z,1528909287.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:28.133Z,1528909288.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:28.156Z,1528909288.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:28.530Z,1528909288.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:28.547Z,1528909288.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:28.932Z,1528909288.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:28.949Z,1528909288.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:29.341Z,1528909289.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:29.359Z,1528909289.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:29.737Z,1528909289.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:29.755Z,1528909289.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:30.138Z,1528909290.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:30.156Z,1528909290.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:30.534Z,1528909290.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:30.552Z,1528909290.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:30.933Z,1528909290.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:30.951Z,1528909290.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:31.334Z,1528909291.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:31.351Z,1528909291.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:31.731Z,1528909291.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:31.763Z,1528909291.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:32.138Z,1528909292.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:32.157Z,1528909292.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:32.538Z,1528909292.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:32.560Z,1528909292.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:32.942Z,1528909292.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:32.960Z,1528909292.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:33.330Z,1528909293.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:33.348Z,1528909293.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:33.731Z,1528909293.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:33.753Z,1528909293.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:34.131Z,1528909294.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:34.173Z,1528909294.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:34.534Z,1528909294.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:34.552Z,1528909294.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:34.934Z,1528909294.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:34.951Z,1528909294.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:35.342Z,1528909295.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:35.360Z,1528909295.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:35.739Z,1528909295.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:35.764Z,1528909295.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:36.138Z,1528909296.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:36.160Z,1528909296.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:36.534Z,1528909296.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:36.552Z,1528909296.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:36.927Z,1528909296.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:36.957Z,1528909296.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:37.338Z,1528909297.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:37.360Z,1528909297.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:37.735Z,1528909297.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:37.754Z,1528909297.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:38.138Z,1528909298.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:38.172Z,1528909298.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:38.547Z,1528909298.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:38.565Z,1528909298.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:38.948Z,1528909298.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:38.972Z,1528909298.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:39.328Z,1528909299.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:39.355Z,1528909299.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:39.727Z,1528909299.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:39.764Z,1528909299.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:40.127Z,1528909300.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:40.158Z,1528909300.158 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:40.158Z,1528909300.158 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 271
2018-06-13T17:01:40.158Z,1528909300.158 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:01:40.160Z,1528909300.160 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:40.160Z,1528909300.160 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 271
2018-06-13T17:01:40.160Z,1528909300.160 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:01:40.162Z,1528909300.162 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:40.162Z,1528909300.162 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 271
2018-06-13T17:01:40.162Z,1528909300.162 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:01:40.241Z,1528909300.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:01:40.241Z,1528909300.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:01:40.242Z,1528909300.242 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:01:40.528Z,1528909300.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:40.637Z,1528909300.637 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:01:40.637Z,1528909300.637 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 271
2018-06-13T17:01:40.637Z,1528909300.637 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:01:40.637Z,1528909300.637 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 271
2018-06-13T17:01:40.638Z,1528909300.638 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:01:40.638Z,1528909300.638 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 271
2018-06-13T17:01:40.927Z,1528909300.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:40.954Z,1528909300.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:01:40.955Z,1528909300.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:01:40.955Z,1528909300.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:01:40.955Z,1528909300.955 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:01:40.956Z,1528909300.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:01:40.956Z,1528909300.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:01:40.956Z,1528909300.956 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:01:40.957Z,1528909300.957 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:01:40.957Z,1528909300.957 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:01:41.337Z,1528909301.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:41.367Z,1528909301.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:01:41.368Z,1528909301.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:41.738Z,1528909301.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:41.774Z,1528909301.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:01:41.775Z,1528909301.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:42.137Z,1528909302.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:42.171Z,1528909302.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:01:42.172Z,1528909302.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:42.527Z,1528909302.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:42.561Z,1528909302.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:01:42.562Z,1528909302.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:42.927Z,1528909302.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:42.944Z,1528909302.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:01:42.962Z,1528909302.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:43.328Z,1528909303.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:43.372Z,1528909303.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:01:43.372Z,1528909303.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:43.727Z,1528909303.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:43.745Z,1528909303.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:01:43.746Z,1528909303.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:44.137Z,1528909304.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:44.155Z,1528909304.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:01:44.156Z,1528909304.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:44.545Z,1528909304.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:44.579Z,1528909304.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:01:44.580Z,1528909304.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:44.941Z,1528909304.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:44.959Z,1528909304.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:01:44.960Z,1528909304.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:45.334Z,1528909305.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:45.352Z,1528909305.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:01:45.353Z,1528909305.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:45.737Z,1528909305.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:45.755Z,1528909305.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:01:45.755Z,1528909305.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:46.135Z,1528909306.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:46.152Z,1528909306.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:01:46.154Z,1528909306.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:46.532Z,1528909306.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:46.550Z,1528909306.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:01:46.551Z,1528909306.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:46.932Z,1528909306.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:46.965Z,1528909306.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:01:46.966Z,1528909306.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:47.342Z,1528909307.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:47.371Z,1528909307.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:01:47.372Z,1528909307.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:47.743Z,1528909307.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:47.760Z,1528909307.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:01:47.761Z,1528909307.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:48.143Z,1528909308.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:48.161Z,1528909308.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:01:48.162Z,1528909308.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:48.534Z,1528909308.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:48.558Z,1528909308.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:01:48.559Z,1528909308.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:48.923Z,1528909308.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:48.960Z,1528909308.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:01:48.965Z,1528909308.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:49.331Z,1528909309.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:49.368Z,1528909309.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:01:49.373Z,1528909309.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:49.727Z,1528909309.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:49.764Z,1528909309.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:01:49.769Z,1528909309.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:50.133Z,1528909310.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:50.168Z,1528909310.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:01:50.169Z,1528909310.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:50.541Z,1528909310.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:50.572Z,1528909310.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:01:50.573Z,1528909310.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:50.941Z,1528909310.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:50.971Z,1528909310.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:01:50.971Z,1528909310.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:51.324Z,1528909311.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:51.341Z,1528909311.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:01:51.342Z,1528909311.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:51.727Z,1528909311.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:51.744Z,1528909311.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:01:51.745Z,1528909311.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:52.131Z,1528909312.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:52.149Z,1528909312.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:01:52.150Z,1528909312.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:52.526Z,1528909312.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:52.544Z,1528909312.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:01:52.545Z,1528909312.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:52.930Z,1528909312.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:52.947Z,1528909312.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:01:52.948Z,1528909312.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:53.342Z,1528909313.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:53.360Z,1528909313.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:01:53.373Z,1528909313.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:53.737Z,1528909313.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:53.755Z,1528909313.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:01:53.756Z,1528909313.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:54.138Z,1528909314.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:54.155Z,1528909314.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:01:54.156Z,1528909314.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:54.526Z,1528909314.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:54.560Z,1528909314.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:01:54.565Z,1528909314.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:54.933Z,1528909314.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:54.950Z,1528909314.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:01:54.951Z,1528909314.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:55.331Z,1528909315.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:55.363Z,1528909315.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:01:55.364Z,1528909315.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:55.731Z,1528909315.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:55.765Z,1528909315.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:01:55.766Z,1528909315.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:56.143Z,1528909316.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:56.160Z,1528909316.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:01:56.161Z,1528909316.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:56.546Z,1528909316.546 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:56.563Z,1528909316.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:01:56.564Z,1528909316.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:56.947Z,1528909316.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:56.965Z,1528909316.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:01:56.966Z,1528909316.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:57.333Z,1528909317.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:57.350Z,1528909317.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:01:57.351Z,1528909317.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:57.723Z,1528909317.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:57.759Z,1528909317.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:01:57.760Z,1528909317.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:58.135Z,1528909318.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:58.157Z,1528909318.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:01:58.158Z,1528909318.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:58.524Z,1528909318.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:58.555Z,1528909318.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:01:58.556Z,1528909318.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:58.933Z,1528909318.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:58.951Z,1528909318.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:01:58.951Z,1528909318.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:59.344Z,1528909319.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:59.368Z,1528909319.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:01:59.369Z,1528909319.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:01:59.746Z,1528909319.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:01:59.768Z,1528909319.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:01:59.769Z,1528909319.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:00.144Z,1528909320.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:00.162Z,1528909320.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:00.527Z,1528909320.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:00.558Z,1528909320.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:00.923Z,1528909320.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:00.955Z,1528909320.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:01.331Z,1528909321.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:01.358Z,1528909321.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:01.361Z,1528909321.361 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T17:02:01.362Z,1528909321.362 [Default:CheckIn:C.Wait] Stopped
2018-06-13T17:02:01.362Z,1528909321.362 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T17:02:01.362Z,1528909321.362 [Default:CheckIn:D] Running Loop=1
2018-06-13T17:02:01.731Z,1528909321.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:01.772Z,1528909321.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:01.776Z,1528909321.776 [Default:CheckIn:D] Stopped
2018-06-13T17:02:01.776Z,1528909321.776 [Default:CheckIn:E] Running Loop=1
2018-06-13T17:02:04.858Z,1528909324.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:04.876Z,1528909324.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:04.879Z,1528909324.879 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 814.805534 min 
2018-06-13T17:02:04.879Z,1528909324.879 [Default:CheckIn:E] Stopped
2018-06-13T17:02:04.879Z,1528909324.879 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T17:02:04.880Z,1528909324.880 [Default:CheckIn] Stopped
2018-06-13T17:02:04.880Z,1528909324.880 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T17:02:04.880Z,1528909324.880 [Default:CheckIn](INFO): Running loop #79
2018-06-13T17:02:04.880Z,1528909324.880 [Default:CheckIn] Running Loop=79
2018-06-13T17:02:04.880Z,1528909324.880 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T17:02:04.880Z,1528909324.880 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T17:02:04.998Z,1528909324.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:05.041Z,1528909325.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:05.409Z,1528909325.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:05.427Z,1528909325.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:05.788Z,1528909325.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:05.822Z,1528909325.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:06.187Z,1528909326.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:06.228Z,1528909326.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:06.588Z,1528909326.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:06.629Z,1528909326.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:06.987Z,1528909326.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:07.025Z,1528909327.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:07.398Z,1528909327.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:07.435Z,1528909327.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:07.801Z,1528909327.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:07.831Z,1528909327.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:08.194Z,1528909328.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:08.232Z,1528909328.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:08.587Z,1528909328.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:08.605Z,1528909328.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:08.987Z,1528909328.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:09.006Z,1528909329.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:09.386Z,1528909329.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:09.405Z,1528909329.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:09.790Z,1528909329.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:09.808Z,1528909329.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:10.202Z,1528909330.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:10.245Z,1528909330.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:10.600Z,1528909330.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:10.638Z,1528909330.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:11.002Z,1528909331.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:11.020Z,1528909331.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:11.393Z,1528909331.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:11.411Z,1528909331.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:11.792Z,1528909331.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:11.811Z,1528909331.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:12.192Z,1528909332.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:12.210Z,1528909332.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:12.592Z,1528909332.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:12.616Z,1528909332.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:12.987Z,1528909332.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:13.011Z,1528909333.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:13.398Z,1528909333.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:13.416Z,1528909333.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:13.801Z,1528909333.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:13.819Z,1528909333.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:14.194Z,1528909334.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:14.220Z,1528909334.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:14.592Z,1528909334.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:14.610Z,1528909334.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:14.993Z,1528909334.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:15.011Z,1528909335.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:15.389Z,1528909335.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:15.408Z,1528909335.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:15.790Z,1528909335.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:15.820Z,1528909335.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:16.202Z,1528909336.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:16.221Z,1528909336.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:16.602Z,1528909336.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:16.620Z,1528909336.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:16.998Z,1528909336.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:17.020Z,1528909337.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:17.393Z,1528909337.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:17.412Z,1528909337.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:17.787Z,1528909337.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:17.814Z,1528909337.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:18.193Z,1528909338.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:18.216Z,1528909338.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:18.595Z,1528909338.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:18.614Z,1528909338.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:18.987Z,1528909338.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:19.011Z,1528909339.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:19.398Z,1528909339.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:19.416Z,1528909339.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:19.802Z,1528909339.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:19.821Z,1528909339.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:20.198Z,1528909340.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:20.217Z,1528909340.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:20.594Z,1528909340.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:20.620Z,1528909340.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:20.994Z,1528909340.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:21.012Z,1528909341.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:21.387Z,1528909341.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:21.412Z,1528909341.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:21.791Z,1528909341.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:21.825Z,1528909341.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:22.204Z,1528909342.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:22.222Z,1528909342.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:22.604Z,1528909342.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:22.622Z,1528909342.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:23.003Z,1528909343.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:23.021Z,1528909343.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:23.395Z,1528909343.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:23.414Z,1528909343.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:23.794Z,1528909343.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:23.812Z,1528909343.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:24.186Z,1528909344.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:24.224Z,1528909344.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:24.588Z,1528909344.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:24.620Z,1528909344.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:24.983Z,1528909344.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:25.020Z,1528909345.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:25.405Z,1528909345.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:25.423Z,1528909345.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:25.810Z,1528909345.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:25.827Z,1528909345.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:26.205Z,1528909346.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:26.223Z,1528909346.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:26.587Z,1528909346.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:26.624Z,1528909346.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:26.987Z,1528909346.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:27.026Z,1528909347.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:27.389Z,1528909347.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:27.418Z,1528909347.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:27.787Z,1528909347.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:27.820Z,1528909347.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:28.210Z,1528909348.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:28.228Z,1528909348.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:28.608Z,1528909348.608 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:28.627Z,1528909348.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:29.005Z,1528909349.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:29.029Z,1528909349.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:29.387Z,1528909349.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:29.421Z,1528909349.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:29.783Z,1528909349.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:29.821Z,1528909349.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:30.187Z,1528909350.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:30.224Z,1528909350.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:30.591Z,1528909350.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:30.633Z,1528909350.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:30.987Z,1528909350.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:31.006Z,1528909351.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:31.406Z,1528909351.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:31.436Z,1528909351.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:31.806Z,1528909351.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:31.836Z,1528909351.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:32.206Z,1528909352.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:32.235Z,1528909352.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:32.592Z,1528909352.592 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:32.610Z,1528909352.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:32.991Z,1528909352.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:33.009Z,1528909353.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:33.385Z,1528909353.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:33.404Z,1528909353.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:33.790Z,1528909353.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:33.809Z,1528909353.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:34.203Z,1528909354.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:34.230Z,1528909354.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:34.598Z,1528909354.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:34.616Z,1528909354.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:35.002Z,1528909355.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:35.041Z,1528909355.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:35.392Z,1528909355.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:35.410Z,1528909355.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:35.787Z,1528909355.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:35.810Z,1528909355.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:36.191Z,1528909356.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:36.211Z,1528909356.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:36.590Z,1528909356.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:36.616Z,1528909356.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:36.992Z,1528909356.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:37.011Z,1528909357.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:37.398Z,1528909357.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:37.416Z,1528909357.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:37.799Z,1528909357.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:37.824Z,1528909357.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:38.199Z,1528909358.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:38.217Z,1528909358.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:38.591Z,1528909358.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:38.621Z,1528909358.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:38.991Z,1528909358.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:39.009Z,1528909359.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:39.387Z,1528909359.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:39.420Z,1528909359.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:39.793Z,1528909359.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:39.816Z,1528909359.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:40.203Z,1528909360.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:40.221Z,1528909360.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:40.602Z,1528909360.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:40.620Z,1528909360.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:41.003Z,1528909361.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:41.021Z,1528909361.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:41.390Z,1528909361.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:41.407Z,1528909361.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:41.787Z,1528909361.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:41.811Z,1528909361.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:42.191Z,1528909362.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:42.214Z,1528909362.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:42.599Z,1528909362.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:42.617Z,1528909362.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:42.987Z,1528909362.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:43.011Z,1528909363.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:43.402Z,1528909363.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:43.420Z,1528909363.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:43.804Z,1528909363.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:43.828Z,1528909363.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:44.200Z,1528909364.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:44.218Z,1528909364.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:44.593Z,1528909364.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:44.616Z,1528909364.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:44.993Z,1528909364.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:45.011Z,1528909365.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:45.387Z,1528909365.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:45.412Z,1528909365.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:45.791Z,1528909365.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:45.824Z,1528909365.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:46.205Z,1528909366.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:46.222Z,1528909366.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:46.604Z,1528909366.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:46.622Z,1528909366.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:47.004Z,1528909367.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:47.028Z,1528909367.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:47.393Z,1528909367.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:47.412Z,1528909367.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:47.783Z,1528909367.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:47.817Z,1528909367.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:48.192Z,1528909368.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:48.217Z,1528909368.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:48.584Z,1528909368.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:48.612Z,1528909368.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:48.993Z,1528909368.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:49.016Z,1528909369.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:49.403Z,1528909369.403 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:49.420Z,1528909369.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:49.804Z,1528909369.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:49.822Z,1528909369.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:50.204Z,1528909370.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:50.222Z,1528909370.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:50.594Z,1528909370.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:50.620Z,1528909370.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:50.983Z,1528909370.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:51.016Z,1528909371.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:51.394Z,1528909371.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:51.420Z,1528909371.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:51.792Z,1528909371.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:51.816Z,1528909371.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:52.204Z,1528909372.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:52.222Z,1528909372.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:52.607Z,1528909372.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:52.625Z,1528909372.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:53.003Z,1528909373.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:53.020Z,1528909373.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:53.383Z,1528909373.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:53.412Z,1528909373.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:53.793Z,1528909373.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:53.816Z,1528909373.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:54.192Z,1528909374.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:54.217Z,1528909374.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:54.594Z,1528909374.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:54.612Z,1528909374.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:54.983Z,1528909374.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:55.022Z,1528909375.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:55.409Z,1528909375.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:55.427Z,1528909375.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:55.805Z,1528909375.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:55.823Z,1528909375.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:56.204Z,1528909376.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:56.222Z,1528909376.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:56.587Z,1528909376.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:56.624Z,1528909376.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:56.987Z,1528909376.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:57.021Z,1528909377.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:57.388Z,1528909377.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:57.419Z,1528909377.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:57.787Z,1528909377.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:57.820Z,1528909377.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:58.210Z,1528909378.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:58.227Z,1528909378.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:58.606Z,1528909378.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:58.629Z,1528909378.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:59.004Z,1528909379.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:59.022Z,1528909379.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:59.388Z,1528909379.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:59.428Z,1528909379.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:02:59.787Z,1528909379.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:02:59.820Z,1528909379.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:00.202Z,1528909380.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:00.235Z,1528909380.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:00.605Z,1528909380.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:00.630Z,1528909380.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:01.004Z,1528909381.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:01.022Z,1528909381.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:01.387Z,1528909381.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:01.424Z,1528909381.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:01.791Z,1528909381.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:01.821Z,1528909381.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:02.210Z,1528909382.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:02.227Z,1528909382.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:02.613Z,1528909382.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:02.630Z,1528909382.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:03.009Z,1528909383.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:03.027Z,1528909383.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:03.388Z,1528909383.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:03.424Z,1528909383.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:03.791Z,1528909383.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:03.819Z,1528909383.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:04.215Z,1528909384.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:04.233Z,1528909384.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:04.613Z,1528909384.613 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:04.631Z,1528909384.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:05.010Z,1528909385.010 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:05.027Z,1528909385.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:05.392Z,1528909385.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:05.428Z,1528909385.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:08.514Z,1528909388.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:08.536Z,1528909388.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:08.702Z,1528909388.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:08.737Z,1528909388.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:09.105Z,1528909389.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:09.123Z,1528909389.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:09.505Z,1528909389.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:09.522Z,1528909389.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:09.879Z,1528909389.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:09.896Z,1528909389.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:10.279Z,1528909390.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:10.297Z,1528909390.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:10.682Z,1528909390.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:10.700Z,1528909390.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:11.083Z,1528909391.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:11.124Z,1528909391.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:11.498Z,1528909391.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:11.531Z,1528909391.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:11.897Z,1528909391.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:11.929Z,1528909391.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:12.293Z,1528909392.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:12.327Z,1528909392.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:12.683Z,1528909392.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:12.700Z,1528909392.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:13.082Z,1528909393.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:13.100Z,1528909393.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:13.483Z,1528909393.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:13.501Z,1528909393.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:13.883Z,1528909393.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:13.908Z,1528909393.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:14.295Z,1528909394.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:14.329Z,1528909394.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:14.694Z,1528909394.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:14.735Z,1528909394.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:15.094Z,1528909395.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:15.112Z,1528909395.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:15.485Z,1528909395.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:15.504Z,1528909395.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:15.885Z,1528909395.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:15.903Z,1528909395.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:16.286Z,1528909396.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:16.320Z,1528909396.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:16.680Z,1528909396.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:16.713Z,1528909396.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:17.090Z,1528909397.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:17.112Z,1528909397.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:17.501Z,1528909397.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:17.519Z,1528909397.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:17.891Z,1528909397.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:17.922Z,1528909397.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:18.300Z,1528909398.300 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:18.319Z,1528909398.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:18.680Z,1528909398.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:18.710Z,1528909398.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:19.080Z,1528909399.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:19.120Z,1528909399.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:19.480Z,1528909399.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:19.512Z,1528909399.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:19.880Z,1528909399.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:19.922Z,1528909399.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:20.297Z,1528909400.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:20.315Z,1528909400.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:20.700Z,1528909400.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:20.718Z,1528909400.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:21.100Z,1528909401.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:21.125Z,1528909401.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:21.475Z,1528909401.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:21.513Z,1528909401.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:21.878Z,1528909401.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:21.907Z,1528909401.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:22.279Z,1528909402.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:22.314Z,1528909402.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:22.680Z,1528909402.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:22.713Z,1528909402.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:23.079Z,1528909403.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:23.112Z,1528909403.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:23.500Z,1528909403.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:23.519Z,1528909403.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:23.894Z,1528909403.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:23.918Z,1528909403.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:24.295Z,1528909404.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:24.313Z,1528909404.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:24.679Z,1528909404.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:24.717Z,1528909404.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:25.079Z,1528909405.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:25.117Z,1528909405.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:25.480Z,1528909405.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:25.513Z,1528909405.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:25.879Z,1528909405.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:25.898Z,1528909405.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:26.289Z,1528909406.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:26.323Z,1528909406.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:26.693Z,1528909406.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:26.730Z,1528909406.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:27.093Z,1528909407.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:27.111Z,1528909407.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:27.483Z,1528909407.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:27.500Z,1528909407.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:27.883Z,1528909407.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:27.900Z,1528909407.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:28.285Z,1528909408.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:28.309Z,1528909408.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:28.682Z,1528909408.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:28.700Z,1528909408.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:29.084Z,1528909409.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:29.102Z,1528909409.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:29.493Z,1528909409.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:29.511Z,1528909409.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:29.893Z,1528909409.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:29.911Z,1528909409.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:30.290Z,1528909410.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:30.307Z,1528909410.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:30.678Z,1528909410.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:30.714Z,1528909410.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:31.079Z,1528909411.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:31.101Z,1528909411.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:31.485Z,1528909411.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:31.503Z,1528909411.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:31.885Z,1528909411.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:31.903Z,1528909411.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:32.286Z,1528909412.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:32.308Z,1528909412.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:32.693Z,1528909412.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:32.712Z,1528909412.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:33.093Z,1528909413.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:33.111Z,1528909413.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:33.482Z,1528909413.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:33.500Z,1528909413.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:33.884Z,1528909413.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:33.901Z,1528909413.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:34.285Z,1528909414.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:34.303Z,1528909414.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:34.685Z,1528909414.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:34.703Z,1528909414.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:35.084Z,1528909415.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:35.102Z,1528909415.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:35.494Z,1528909415.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:35.512Z,1528909415.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:35.889Z,1528909415.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:35.907Z,1528909415.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:36.289Z,1528909416.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:36.307Z,1528909416.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:36.685Z,1528909416.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:36.711Z,1528909416.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:37.084Z,1528909417.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:37.102Z,1528909417.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:37.480Z,1528909417.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:37.505Z,1528909417.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:37.885Z,1528909417.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:37.903Z,1528909417.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:38.290Z,1528909418.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:38.308Z,1528909418.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:38.693Z,1528909418.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:38.711Z,1528909418.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:39.093Z,1528909419.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:39.111Z,1528909419.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:39.483Z,1528909419.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:39.508Z,1528909419.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:39.884Z,1528909419.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:39.908Z,1528909419.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:40.286Z,1528909420.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:40.304Z,1528909420.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:40.682Z,1528909420.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:40.700Z,1528909420.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:41.084Z,1528909421.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:41.102Z,1528909421.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:41.494Z,1528909421.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:41.512Z,1528909421.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:41.893Z,1528909421.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:41.911Z,1528909421.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:42.290Z,1528909422.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:42.308Z,1528909422.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:42.685Z,1528909422.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:42.703Z,1528909422.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:43.079Z,1528909423.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:43.113Z,1528909423.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:43.486Z,1528909423.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:43.503Z,1528909423.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:43.883Z,1528909423.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:43.912Z,1528909423.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:44.290Z,1528909424.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:44.313Z,1528909424.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:44.693Z,1528909424.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:44.711Z,1528909424.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:45.093Z,1528909425.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:45.111Z,1528909425.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:45.479Z,1528909425.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:45.502Z,1528909425.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:45.883Z,1528909425.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:45.905Z,1528909425.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:46.286Z,1528909426.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:46.304Z,1528909426.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:46.686Z,1528909426.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:46.704Z,1528909426.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:47.086Z,1528909427.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:47.104Z,1528909427.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:47.493Z,1528909427.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:47.512Z,1528909427.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:47.891Z,1528909427.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:47.916Z,1528909427.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:48.290Z,1528909428.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:48.312Z,1528909428.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:48.683Z,1528909428.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:48.716Z,1528909428.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:49.082Z,1528909429.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:49.101Z,1528909429.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:49.484Z,1528909429.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:49.511Z,1528909429.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:49.891Z,1528909429.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:49.909Z,1528909429.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:50.290Z,1528909430.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:50.323Z,1528909430.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:50.699Z,1528909430.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:50.724Z,1528909430.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:51.100Z,1528909431.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:51.119Z,1528909431.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:51.486Z,1528909431.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:51.512Z,1528909431.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:51.883Z,1528909431.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:51.912Z,1528909431.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:52.279Z,1528909432.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:52.318Z,1528909432.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:52.680Z,1528909432.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:52.708Z,1528909432.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:53.079Z,1528909433.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:53.106Z,1528909433.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:53.500Z,1528909433.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:53.519Z,1528909433.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:53.900Z,1528909433.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:53.924Z,1528909433.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:54.295Z,1528909434.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:54.313Z,1528909434.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:54.683Z,1528909434.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:54.713Z,1528909434.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:55.075Z,1528909435.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:55.111Z,1528909435.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:55.480Z,1528909435.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:55.507Z,1528909435.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:55.879Z,1528909435.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:55.909Z,1528909435.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:56.297Z,1528909436.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:56.315Z,1528909436.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:56.698Z,1528909436.698 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:56.730Z,1528909436.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:57.100Z,1528909437.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:57.118Z,1528909437.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:57.483Z,1528909437.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:57.511Z,1528909437.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:57.880Z,1528909437.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:57.908Z,1528909437.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:58.280Z,1528909438.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:58.316Z,1528909438.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:58.680Z,1528909438.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:58.711Z,1528909438.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:59.079Z,1528909439.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:59.111Z,1528909439.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:59.502Z,1528909439.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:59.524Z,1528909439.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:03:59.894Z,1528909439.894 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:03:59.919Z,1528909439.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:00.297Z,1528909440.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:00.314Z,1528909440.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:00.679Z,1528909440.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:00.715Z,1528909440.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:01.075Z,1528909441.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:01.109Z,1528909441.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:01.484Z,1528909441.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:01.520Z,1528909441.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:01.883Z,1528909441.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:01.926Z,1528909441.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:02.293Z,1528909442.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:02.323Z,1528909442.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:02.697Z,1528909442.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:02.733Z,1528909442.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:03.097Z,1528909443.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:03.132Z,1528909443.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:03.480Z,1528909443.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:03.498Z,1528909443.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:03.879Z,1528909443.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:03.896Z,1528909443.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:04.297Z,1528909444.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:04.327Z,1528909444.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:04.697Z,1528909444.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:04.732Z,1528909444.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:05.089Z,1528909445.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:05.119Z,1528909445.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:05.484Z,1528909445.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:05.502Z,1528909445.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:08.599Z,1528909448.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:08.630Z,1528909448.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:08.754Z,1528909448.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:08.797Z,1528909448.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:09.150Z,1528909449.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:09.175Z,1528909449.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:09.563Z,1528909449.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:09.581Z,1528909449.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:09.935Z,1528909449.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:09.969Z,1528909449.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:10.339Z,1528909450.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:10.364Z,1528909450.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:10.738Z,1528909450.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:10.764Z,1528909450.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:11.140Z,1528909451.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:11.159Z,1528909451.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:11.551Z,1528909451.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:11.569Z,1528909451.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:11.946Z,1528909451.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:11.963Z,1528909451.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:12.346Z,1528909452.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:12.364Z,1528909452.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:12.741Z,1528909452.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:12.764Z,1528909452.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:13.140Z,1528909453.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:13.158Z,1528909453.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:13.539Z,1528909453.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:13.566Z,1528909453.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:13.935Z,1528909453.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:13.960Z,1528909453.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:14.347Z,1528909454.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:14.365Z,1528909454.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:14.750Z,1528909454.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:14.772Z,1528909454.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:15.151Z,1528909455.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:15.169Z,1528909455.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:15.535Z,1528909455.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:15.558Z,1528909455.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:15.939Z,1528909455.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:15.972Z,1528909455.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:16.342Z,1528909456.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:16.366Z,1528909456.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:16.732Z,1528909456.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:16.763Z,1528909456.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:17.131Z,1528909457.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:17.167Z,1528909457.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:17.555Z,1528909457.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:17.574Z,1528909457.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:17.954Z,1528909457.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:17.976Z,1528909457.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:18.355Z,1528909458.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:18.380Z,1528909458.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:18.742Z,1528909458.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:18.760Z,1528909458.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:19.145Z,1528909459.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:19.163Z,1528909459.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:19.541Z,1528909459.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:19.564Z,1528909459.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:19.939Z,1528909459.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:19.964Z,1528909459.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:20.351Z,1528909460.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:20.369Z,1528909460.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:20.755Z,1528909460.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:20.773Z,1528909460.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:21.156Z,1528909461.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:21.175Z,1528909461.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:21.535Z,1528909461.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:21.562Z,1528909461.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:21.935Z,1528909461.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:21.971Z,1528909461.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:22.335Z,1528909462.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:22.366Z,1528909462.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:22.736Z,1528909462.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:22.763Z,1528909462.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:23.135Z,1528909463.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:23.162Z,1528909463.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:23.556Z,1528909463.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:23.575Z,1528909463.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:23.956Z,1528909463.956 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:23.974Z,1528909463.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:24.351Z,1528909464.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:24.369Z,1528909464.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:24.735Z,1528909464.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:24.764Z,1528909464.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:25.135Z,1528909465.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:25.162Z,1528909465.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:25.536Z,1528909465.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:25.563Z,1528909465.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:25.936Z,1528909465.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:25.972Z,1528909465.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:26.348Z,1528909466.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:26.366Z,1528909466.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:26.755Z,1528909466.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:26.773Z,1528909466.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:27.151Z,1528909467.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:27.169Z,1528909467.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:27.531Z,1528909467.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:27.567Z,1528909467.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:27.935Z,1528909467.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:27.973Z,1528909467.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:28.339Z,1528909468.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:28.368Z,1528909468.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:28.736Z,1528909468.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:28.768Z,1528909468.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:29.135Z,1528909469.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:29.167Z,1528909469.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:29.556Z,1528909469.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:29.575Z,1528909469.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:29.952Z,1528909469.952 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:29.971Z,1528909469.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:30.351Z,1528909470.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:30.369Z,1528909470.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:30.736Z,1528909470.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:30.767Z,1528909470.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:31.135Z,1528909471.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:31.172Z,1528909471.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:31.536Z,1528909471.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:31.568Z,1528909471.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:31.936Z,1528909471.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:31.970Z,1528909471.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:32.345Z,1528909472.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:32.376Z,1528909472.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:32.754Z,1528909472.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:32.780Z,1528909472.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:33.149Z,1528909473.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:33.178Z,1528909473.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:33.535Z,1528909473.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:33.552Z,1528909473.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:33.939Z,1528909473.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:33.956Z,1528909473.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:34.335Z,1528909474.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:34.360Z,1528909474.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:34.739Z,1528909474.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:34.757Z,1528909474.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:35.138Z,1528909475.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:35.156Z,1528909475.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:35.553Z,1528909475.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:35.588Z,1528909475.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:35.950Z,1528909475.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:35.986Z,1528909475.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:36.350Z,1528909476.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:36.388Z,1528909476.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:36.738Z,1528909476.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:36.757Z,1528909476.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:37.135Z,1528909477.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:37.161Z,1528909477.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:37.541Z,1528909477.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:37.564Z,1528909477.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:37.941Z,1528909477.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:37.960Z,1528909477.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:38.345Z,1528909478.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:38.364Z,1528909478.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:38.749Z,1528909478.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:38.768Z,1528909478.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:39.149Z,1528909479.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:39.168Z,1528909479.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:39.541Z,1528909479.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:39.560Z,1528909479.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:39.942Z,1528909479.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:39.960Z,1528909479.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:40.349Z,1528909480.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:40.368Z,1528909480.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:40.746Z,1528909480.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:40.764Z,1528909480.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:41.145Z,1528909481.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:41.164Z,1528909481.164 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:41.164Z,1528909481.164 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 272
2018-06-13T17:04:41.164Z,1528909481.164 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:04:41.166Z,1528909481.166 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:41.166Z,1528909481.166 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 272
2018-06-13T17:04:41.166Z,1528909481.166 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:04:41.168Z,1528909481.168 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:41.168Z,1528909481.168 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 272
2018-06-13T17:04:41.168Z,1528909481.168 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:04:41.249Z,1528909481.249 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:04:41.249Z,1528909481.249 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:04:41.250Z,1528909481.250 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:04:41.539Z,1528909481.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:41.661Z,1528909481.661 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:04:41.661Z,1528909481.661 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 272
2018-06-13T17:04:41.662Z,1528909481.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:04:41.662Z,1528909481.662 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 272
2018-06-13T17:04:41.662Z,1528909481.662 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:04:41.662Z,1528909481.662 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 272
2018-06-13T17:04:41.934Z,1528909481.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:41.966Z,1528909481.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:04:41.966Z,1528909481.966 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:04:41.967Z,1528909481.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:04:41.967Z,1528909481.967 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:04:41.967Z,1528909481.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:04:41.968Z,1528909481.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:04:41.968Z,1528909481.968 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:04:41.968Z,1528909481.968 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:04:41.969Z,1528909481.969 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:04:42.346Z,1528909482.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:42.378Z,1528909482.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:04:42.379Z,1528909482.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:42.752Z,1528909482.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:42.776Z,1528909482.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:04:42.777Z,1528909482.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:43.148Z,1528909483.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:43.165Z,1528909483.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:04:43.166Z,1528909483.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:43.536Z,1528909483.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:43.566Z,1528909483.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:04:43.567Z,1528909483.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:43.932Z,1528909483.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:43.966Z,1528909483.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:04:43.967Z,1528909483.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:44.350Z,1528909484.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:44.368Z,1528909484.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:04:44.368Z,1528909484.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:44.754Z,1528909484.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:44.780Z,1528909484.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:04:44.785Z,1528909484.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:45.150Z,1528909485.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:45.175Z,1528909485.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:04:45.176Z,1528909485.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:45.532Z,1528909485.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:45.571Z,1528909485.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:04:45.572Z,1528909485.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:45.935Z,1528909485.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:45.969Z,1528909485.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:04:45.970Z,1528909485.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:46.345Z,1528909486.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:46.376Z,1528909486.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:04:46.377Z,1528909486.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:46.745Z,1528909486.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:46.773Z,1528909486.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:04:46.774Z,1528909486.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:47.141Z,1528909487.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:47.175Z,1528909487.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:04:47.176Z,1528909487.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:47.531Z,1528909487.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:47.548Z,1528909487.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:04:47.549Z,1528909487.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:47.934Z,1528909487.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:47.951Z,1528909487.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:04:47.952Z,1528909487.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:48.349Z,1528909488.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:48.387Z,1528909488.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:04:48.388Z,1528909488.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:48.753Z,1528909488.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:48.782Z,1528909488.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:04:48.783Z,1528909488.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:49.153Z,1528909489.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:49.182Z,1528909489.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:04:49.182Z,1528909489.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:49.540Z,1528909489.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:49.557Z,1528909489.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:04:49.558Z,1528909489.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:49.938Z,1528909489.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:49.955Z,1528909489.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:04:49.956Z,1528909489.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:50.349Z,1528909490.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:50.384Z,1528909490.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:04:50.390Z,1528909490.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:50.749Z,1528909490.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:50.767Z,1528909490.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:04:50.768Z,1528909490.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:51.146Z,1528909491.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:51.163Z,1528909491.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:04:51.164Z,1528909491.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:51.540Z,1528909491.540 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:51.558Z,1528909491.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:04:51.559Z,1528909491.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:51.940Z,1528909491.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:51.958Z,1528909491.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:04:51.959Z,1528909491.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:52.345Z,1528909492.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:52.363Z,1528909492.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:04:52.364Z,1528909492.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:52.745Z,1528909492.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:52.763Z,1528909492.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:04:52.764Z,1528909492.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:53.146Z,1528909493.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:53.164Z,1528909493.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:04:53.165Z,1528909493.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:53.538Z,1528909493.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:53.560Z,1528909493.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:04:53.560Z,1528909493.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:53.938Z,1528909493.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:53.956Z,1528909493.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:04:53.956Z,1528909493.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:54.345Z,1528909494.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:54.363Z,1528909494.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:04:54.364Z,1528909494.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:54.749Z,1528909494.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:54.766Z,1528909494.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:04:54.767Z,1528909494.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:55.142Z,1528909495.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:55.164Z,1528909495.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:04:55.165Z,1528909495.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:55.539Z,1528909495.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:55.571Z,1528909495.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:04:55.572Z,1528909495.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:55.938Z,1528909495.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:55.960Z,1528909495.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:04:55.960Z,1528909495.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:56.346Z,1528909496.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:56.364Z,1528909496.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:04:56.365Z,1528909496.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:56.749Z,1528909496.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:56.767Z,1528909496.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:04:56.768Z,1528909496.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:57.149Z,1528909497.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:57.171Z,1528909497.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:04:57.172Z,1528909497.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:57.535Z,1528909497.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:57.558Z,1528909497.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:04:57.559Z,1528909497.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:57.940Z,1528909497.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:57.958Z,1528909497.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:04:57.959Z,1528909497.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:58.349Z,1528909498.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:58.371Z,1528909498.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:04:58.372Z,1528909498.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:58.749Z,1528909498.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:58.767Z,1528909498.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:04:58.768Z,1528909498.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:59.146Z,1528909499.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:59.164Z,1528909499.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:04:59.165Z,1528909499.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:59.542Z,1528909499.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:59.559Z,1528909499.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:04:59.560Z,1528909499.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:04:59.941Z,1528909499.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:04:59.958Z,1528909499.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:04:59.959Z,1528909499.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:00.346Z,1528909500.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:00.363Z,1528909500.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:05:00.364Z,1528909500.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:00.749Z,1528909500.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:00.766Z,1528909500.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:05:00.767Z,1528909500.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:01.146Z,1528909501.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:01.164Z,1528909501.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:01.535Z,1528909501.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:01.576Z,1528909501.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:01.935Z,1528909501.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:01.953Z,1528909501.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:05.071Z,1528909505.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:05.089Z,1528909505.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:05.216Z,1528909505.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:05.252Z,1528909505.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:05.620Z,1528909505.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:05.638Z,1528909505.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:05.996Z,1528909505.996 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:06.034Z,1528909506.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:06.395Z,1528909506.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:06.412Z,1528909506.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:06.795Z,1528909506.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:06.813Z,1528909506.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:07.199Z,1528909507.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:07.216Z,1528909507.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:07.609Z,1528909507.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:07.647Z,1528909507.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:08.009Z,1528909508.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:08.046Z,1528909508.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:08.409Z,1528909508.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:08.427Z,1528909508.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:08.800Z,1528909508.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:08.818Z,1528909508.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:09.200Z,1528909509.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:09.217Z,1528909509.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:09.601Z,1528909509.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:09.619Z,1528909509.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:09.998Z,1528909509.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:10.016Z,1528909510.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:10.405Z,1528909510.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:10.428Z,1528909510.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:10.810Z,1528909510.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:10.828Z,1528909510.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:11.206Z,1528909511.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:11.223Z,1528909511.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:11.601Z,1528909511.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:11.619Z,1528909511.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:11.000Z,1528909512.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:12.018Z,1528909512.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:12.405Z,1528909512.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:12.423Z,1528909512.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:12.809Z,1528909512.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:12.827Z,1528909512.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:13.206Z,1528909513.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:13.224Z,1528909513.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:13.601Z,1528909513.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:13.619Z,1528909513.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:13.000Z,1528909514.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:14.018Z,1528909514.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:14.406Z,1528909514.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:14.424Z,1528909514.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:14.809Z,1528909514.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:14.827Z,1528909514.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:15.209Z,1528909515.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:15.232Z,1528909515.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:15.601Z,1528909515.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:15.620Z,1528909515.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:16.000Z,1528909516.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:16.018Z,1528909516.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:16.409Z,1528909516.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:16.432Z,1528909516.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:16.809Z,1528909516.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:16.827Z,1528909516.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:17.207Z,1528909517.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:17.226Z,1528909517.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:17.600Z,1528909517.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:17.627Z,1528909517.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:18.000Z,1528909518.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:18.024Z,1528909518.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:18.413Z,1528909518.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:18.431Z,1528909518.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:18.809Z,1528909518.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:18.827Z,1528909518.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:19.207Z,1528909519.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:19.224Z,1528909519.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:19.594Z,1528909519.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:19.620Z,1528909519.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:19.999Z,1528909519.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:20.024Z,1528909520.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:20.412Z,1528909520.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:20.430Z,1528909520.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:20.810Z,1528909520.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:20.832Z,1528909520.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:21.212Z,1528909521.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:21.236Z,1528909521.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:21.596Z,1528909521.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:21.618Z,1528909521.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:22.001Z,1528909522.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:22.019Z,1528909522.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:22.409Z,1528909522.409 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:22.429Z,1528909522.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:22.810Z,1528909522.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:22.828Z,1528909522.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:23.212Z,1528909523.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:23.231Z,1528909523.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:23.600Z,1528909523.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:23.622Z,1528909523.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:24.001Z,1528909524.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:24.019Z,1528909524.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:24.410Z,1528909524.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:24.427Z,1528909524.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:24.810Z,1528909524.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:24.832Z,1528909524.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:25.211Z,1528909525.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:25.229Z,1528909525.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:25.599Z,1528909525.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:25.623Z,1528909525.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:25.999Z,1528909525.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:26.025Z,1528909526.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:26.411Z,1528909526.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:26.428Z,1528909526.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:26.810Z,1528909526.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:26.832Z,1528909526.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:27.213Z,1528909527.213 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:27.236Z,1528909527.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:27.602Z,1528909527.602 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:27.624Z,1528909527.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:28.006Z,1528909528.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:28.028Z,1528909528.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:28.412Z,1528909528.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:28.436Z,1528909528.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:28.811Z,1528909528.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:28.828Z,1528909528.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:29.210Z,1528909529.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:29.235Z,1528909529.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:29.599Z,1528909529.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:29.637Z,1528909529.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:29.995Z,1528909529.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:30.025Z,1528909530.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:30.412Z,1528909530.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:30.430Z,1528909530.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:30.817Z,1528909530.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:30.835Z,1528909530.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:31.212Z,1528909531.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:31.230Z,1528909531.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:31.596Z,1528909531.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:31.631Z,1528909531.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:31.995Z,1528909531.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:32.026Z,1528909532.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:32.407Z,1528909532.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:32.426Z,1528909532.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:32.816Z,1528909532.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:32.834Z,1528909532.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:33.216Z,1528909533.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:33.234Z,1528909533.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:33.596Z,1528909533.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:33.623Z,1528909533.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:33.995Z,1528909533.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:34.033Z,1528909534.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:34.416Z,1528909534.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:34.434Z,1528909534.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:34.815Z,1528909534.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:34.833Z,1528909534.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:35.212Z,1528909535.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:35.236Z,1528909535.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:35.596Z,1528909535.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:35.628Z,1528909535.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:35.995Z,1528909535.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:36.028Z,1528909536.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:36.411Z,1528909536.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:36.429Z,1528909536.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:36.817Z,1528909536.817 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:36.835Z,1528909536.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:37.207Z,1528909537.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:37.225Z,1528909537.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:37.595Z,1528909537.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:37.622Z,1528909537.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:37.995Z,1528909537.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:38.034Z,1528909538.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:38.412Z,1528909538.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:38.430Z,1528909538.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:38.816Z,1528909538.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:38.833Z,1528909538.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:39.216Z,1528909539.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:39.234Z,1528909539.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:39.600Z,1528909539.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:39.627Z,1528909539.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:39.995Z,1528909539.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:40.027Z,1528909540.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:40.416Z,1528909540.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:40.434Z,1528909540.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:40.815Z,1528909540.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:40.841Z,1528909540.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:41.211Z,1528909541.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:41.236Z,1528909541.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:41.597Z,1528909541.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:41.626Z,1528909541.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:41.995Z,1528909541.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:42.027Z,1528909542.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:42.412Z,1528909542.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:42.430Z,1528909542.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:42.815Z,1528909542.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:42.840Z,1528909542.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:43.211Z,1528909543.211 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:43.229Z,1528909543.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:43.596Z,1528909543.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:43.632Z,1528909543.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:43.995Z,1528909543.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:44.029Z,1528909544.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:44.401Z,1528909544.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:44.435Z,1528909544.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:44.814Z,1528909544.814 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:44.832Z,1528909544.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:45.216Z,1528909545.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:45.234Z,1528909545.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:45.596Z,1528909545.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:45.634Z,1528909545.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:45.995Z,1528909545.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:46.024Z,1528909546.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:46.410Z,1528909546.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:46.440Z,1528909546.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:46.805Z,1528909546.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:46.832Z,1528909546.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:47.207Z,1528909547.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:47.236Z,1528909547.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:47.596Z,1528909547.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:47.636Z,1528909547.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:47.995Z,1528909547.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:48.012Z,1528909548.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:48.405Z,1528909548.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:48.444Z,1528909548.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:48.809Z,1528909548.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:48.838Z,1528909548.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:49.206Z,1528909549.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:49.243Z,1528909549.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:49.599Z,1528909549.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:49.633Z,1528909549.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:49.999Z,1528909549.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:50.017Z,1528909550.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:50.405Z,1528909550.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:50.423Z,1528909550.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:50.809Z,1528909550.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:50.827Z,1528909550.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:51.210Z,1528909551.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:51.228Z,1528909551.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:51.595Z,1528909551.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:51.620Z,1528909551.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:51.000Z,1528909552.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:52.018Z,1528909552.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:52.400Z,1528909552.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:52.419Z,1528909552.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:52.805Z,1528909552.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:52.824Z,1528909552.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:53.212Z,1528909553.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:53.231Z,1528909553.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:53.609Z,1528909553.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:53.627Z,1528909553.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:54.001Z,1528909554.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:54.019Z,1528909554.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:54.400Z,1528909554.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:54.418Z,1528909554.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:54.800Z,1528909554.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:54.822Z,1528909554.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:55.201Z,1528909555.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:55.219Z,1528909555.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:55.606Z,1528909555.606 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:55.628Z,1528909555.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:56.009Z,1528909556.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:56.027Z,1528909556.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:56.407Z,1528909556.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:56.425Z,1528909556.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:56.805Z,1528909556.805 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:56.822Z,1528909556.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:57.202Z,1528909557.202 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:57.228Z,1528909557.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:57.595Z,1528909557.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:57.619Z,1528909557.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:57.999Z,1528909557.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:58.034Z,1528909558.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:58.399Z,1528909558.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:58.425Z,1528909558.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:58.808Z,1528909558.808 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:58.826Z,1528909558.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:59.212Z,1528909559.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:59.232Z,1528909559.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:59.611Z,1528909559.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:05:59.636Z,1528909559.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:05:59.995Z,1528909559.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:00.020Z,1528909560.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:00.399Z,1528909560.399 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:00.423Z,1528909560.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:00.804Z,1528909560.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:00.822Z,1528909560.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:01.195Z,1528909561.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:01.219Z,1528909561.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:01.609Z,1528909561.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:01.628Z,1528909561.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:02.014Z,1528909562.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:02.032Z,1528909562.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:05.121Z,1528909565.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:05.139Z,1528909565.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:05.276Z,1528909565.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:05.316Z,1528909565.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:05.673Z,1528909565.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:05.691Z,1528909565.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:06.077Z,1528909566.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:06.095Z,1528909566.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:06.482Z,1528909566.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:06.520Z,1528909566.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:06.882Z,1528909566.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:06.900Z,1528909566.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:07.274Z,1528909567.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:07.300Z,1528909567.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:07.672Z,1528909567.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:07.690Z,1528909567.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:08.073Z,1528909568.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:08.092Z,1528909568.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:08.474Z,1528909568.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:08.497Z,1528909568.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:08.881Z,1528909568.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:08.899Z,1528909568.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:09.281Z,1528909569.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:09.300Z,1528909569.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:09.670Z,1528909569.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:09.688Z,1528909569.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:10.072Z,1528909570.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:10.090Z,1528909570.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:10.481Z,1528909570.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:10.499Z,1528909570.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:10.882Z,1528909570.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:10.904Z,1528909570.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:11.278Z,1528909571.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:11.300Z,1528909571.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:11.676Z,1528909571.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:11.694Z,1528909571.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:12.067Z,1528909572.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:12.091Z,1528909572.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:12.478Z,1528909572.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:12.496Z,1528909572.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:12.881Z,1528909572.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:12.900Z,1528909572.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:13.278Z,1528909573.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:13.304Z,1528909573.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:13.677Z,1528909573.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:13.695Z,1528909573.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:14.074Z,1528909574.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:14.097Z,1528909574.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:14.488Z,1528909574.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:14.512Z,1528909574.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:14.886Z,1528909574.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:14.904Z,1528909574.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:15.286Z,1528909575.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:15.312Z,1528909575.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:15.666Z,1528909575.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:15.704Z,1528909575.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:16.067Z,1528909576.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:16.095Z,1528909576.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:16.491Z,1528909576.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:16.509Z,1528909576.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:16.890Z,1528909576.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:16.907Z,1528909576.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:17.284Z,1528909577.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:17.302Z,1528909577.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:17.668Z,1528909577.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:17.708Z,1528909577.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:18.063Z,1528909578.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:18.096Z,1528909578.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:18.480Z,1528909578.480 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:18.508Z,1528909578.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:18.888Z,1528909578.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:18.906Z,1528909578.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:19.274Z,1528909579.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:19.301Z,1528909579.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:19.668Z,1528909579.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:19.714Z,1528909579.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:20.067Z,1528909580.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:20.096Z,1528909580.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:20.478Z,1528909580.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:20.507Z,1528909580.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:20.881Z,1528909580.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:20.914Z,1528909580.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:21.281Z,1528909581.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:21.320Z,1528909581.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:21.668Z,1528909581.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:21.702Z,1528909581.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:22.067Z,1528909582.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:22.084Z,1528909582.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:22.481Z,1528909582.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:22.508Z,1528909582.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:22.885Z,1528909582.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:22.911Z,1528909582.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:23.277Z,1528909583.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:23.310Z,1528909583.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:23.670Z,1528909583.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:23.688Z,1528909583.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:24.067Z,1528909584.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:24.085Z,1528909584.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:24.478Z,1528909584.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:24.512Z,1528909584.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:24.882Z,1528909584.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:24.915Z,1528909584.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:25.282Z,1528909585.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:25.320Z,1528909585.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:25.673Z,1528909585.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:25.691Z,1528909585.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:26.074Z,1528909586.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:26.092Z,1528909586.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:26.478Z,1528909586.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:26.496Z,1528909586.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:26.881Z,1528909586.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:26.899Z,1528909586.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:27.282Z,1528909587.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:27.300Z,1528909587.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:27.670Z,1528909587.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:27.688Z,1528909587.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:28.073Z,1528909588.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:28.091Z,1528909588.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:28.481Z,1528909588.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:28.499Z,1528909588.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:28.881Z,1528909588.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:28.899Z,1528909588.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:29.278Z,1528909589.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:29.295Z,1528909589.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:29.672Z,1528909589.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:29.698Z,1528909589.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:30.067Z,1528909590.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:30.099Z,1528909590.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:30.474Z,1528909590.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:30.496Z,1528909590.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:30.881Z,1528909590.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:30.899Z,1528909590.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:31.278Z,1528909591.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:31.295Z,1528909591.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:31.672Z,1528909591.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:31.690Z,1528909591.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:32.073Z,1528909592.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:32.097Z,1528909592.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:32.467Z,1528909592.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:32.490Z,1528909592.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:32.878Z,1528909592.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:32.895Z,1528909592.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:33.281Z,1528909593.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:33.323Z,1528909593.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:33.678Z,1528909593.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:33.696Z,1528909593.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:34.071Z,1528909594.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:34.094Z,1528909594.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:34.474Z,1528909594.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:34.492Z,1528909594.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:34.874Z,1528909594.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:34.892Z,1528909594.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:35.271Z,1528909595.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:35.293Z,1528909595.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:35.681Z,1528909595.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:35.700Z,1528909595.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:36.078Z,1528909596.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:36.100Z,1528909596.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:36.478Z,1528909596.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:36.500Z,1528909596.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:36.875Z,1528909596.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:36.893Z,1528909596.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:37.267Z,1528909597.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:37.290Z,1528909597.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:37.671Z,1528909597.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:37.705Z,1528909597.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:38.074Z,1528909598.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:38.092Z,1528909598.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:38.473Z,1528909598.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:38.491Z,1528909598.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:38.882Z,1528909598.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:38.900Z,1528909598.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:39.283Z,1528909599.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:39.300Z,1528909599.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:39.682Z,1528909599.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:39.700Z,1528909599.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:40.071Z,1528909600.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:40.094Z,1528909600.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:40.474Z,1528909600.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:40.505Z,1528909600.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:40.867Z,1528909600.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:40.891Z,1528909600.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:41.274Z,1528909601.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:41.291Z,1528909601.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:41.684Z,1528909601.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:41.702Z,1528909601.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:42.083Z,1528909602.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:42.100Z,1528909602.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:42.483Z,1528909602.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:42.500Z,1528909602.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:42.879Z,1528909602.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:42.897Z,1528909602.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:43.274Z,1528909603.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:43.292Z,1528909603.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:43.671Z,1528909603.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:43.702Z,1528909603.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:44.075Z,1528909604.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:44.098Z,1528909604.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:44.463Z,1528909604.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:44.500Z,1528909604.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:44.884Z,1528909604.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:44.902Z,1528909604.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:45.286Z,1528909605.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:45.322Z,1528909605.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:45.683Z,1528909605.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:45.702Z,1528909605.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:46.071Z,1528909606.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:46.095Z,1528909606.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:46.475Z,1528909606.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:46.494Z,1528909606.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:46.864Z,1528909606.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:46.896Z,1528909606.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:47.271Z,1528909607.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:47.294Z,1528909607.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:47.686Z,1528909607.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:47.705Z,1528909607.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:48.083Z,1528909608.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:48.101Z,1528909608.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:48.484Z,1528909608.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:48.502Z,1528909608.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:48.874Z,1528909608.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:48.896Z,1528909608.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:49.263Z,1528909609.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:49.299Z,1528909609.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:49.671Z,1528909609.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:49.694Z,1528909609.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:50.075Z,1528909610.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:50.093Z,1528909610.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:50.463Z,1528909610.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:50.500Z,1528909610.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:50.883Z,1528909610.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:50.900Z,1528909610.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:51.287Z,1528909611.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:51.305Z,1528909611.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:51.678Z,1528909611.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:51.700Z,1528909611.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:52.074Z,1528909612.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:52.092Z,1528909612.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:52.474Z,1528909612.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:52.497Z,1528909612.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:52.864Z,1528909612.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:52.895Z,1528909612.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:53.271Z,1528909613.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:53.300Z,1528909613.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:53.688Z,1528909613.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:53.707Z,1528909613.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:54.083Z,1528909614.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:54.102Z,1528909614.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:54.492Z,1528909614.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:54.516Z,1528909614.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:54.864Z,1528909614.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:54.898Z,1528909614.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:55.268Z,1528909615.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:55.306Z,1528909615.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:55.668Z,1528909615.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:55.708Z,1528909615.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:56.068Z,1528909616.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:56.102Z,1528909616.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:56.463Z,1528909616.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:56.481Z,1528909616.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:56.878Z,1528909616.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:56.916Z,1528909616.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:57.277Z,1528909617.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:57.304Z,1528909617.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:57.681Z,1528909617.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:57.715Z,1528909617.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:58.072Z,1528909618.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:58.090Z,1528909618.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:58.470Z,1528909618.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:58.487Z,1528909618.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:58.867Z,1528909618.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:58.884Z,1528909618.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:59.270Z,1528909619.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:59.288Z,1528909619.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:06:59.681Z,1528909619.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:06:59.722Z,1528909619.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:00.078Z,1528909620.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:00.096Z,1528909620.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:00.481Z,1528909620.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:00.499Z,1528909620.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:00.873Z,1528909620.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:00.890Z,1528909620.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:01.267Z,1528909621.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:01.290Z,1528909621.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:01.674Z,1528909621.674 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:01.692Z,1528909621.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:02.074Z,1528909622.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:02.092Z,1528909622.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:05.178Z,1528909625.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:05.197Z,1528909625.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:05.200Z,1528909625.200 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T17:02:04.9Z
2018-06-13T17:07:05.200Z,1528909625.200 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T17:07:05.200Z,1528909625.200 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T17:07:05.345Z,1528909625.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:05.375Z,1528909625.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:06.481Z,1528909626.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:06.499Z,1528909626.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:06.635Z,1528909626.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:06.671Z,1528909626.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:07.029Z,1528909627.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:07.047Z,1528909627.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:07.427Z,1528909627.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:07.445Z,1528909627.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:07.827Z,1528909627.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:07.845Z,1528909627.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:08.226Z,1528909628.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:08.244Z,1528909628.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:08.637Z,1528909628.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:08.656Z,1528909628.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:09.034Z,1528909629.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:09.056Z,1528909629.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:09.434Z,1528909629.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:09.452Z,1528909629.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:09.823Z,1528909629.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:09.854Z,1528909629.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:10.231Z,1528909630.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:10.249Z,1528909630.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:10.629Z,1528909630.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:10.652Z,1528909630.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:11.032Z,1528909631.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:11.050Z,1528909631.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:14.133Z,1528909634.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:14.151Z,1528909634.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:14.249Z,1528909634.249 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0316.lzma
2018-06-13T17:07:14.292Z,1528909634.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:14.335Z,1528909634.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:14.690Z,1528909634.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:14.709Z,1528909634.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:15.050Z,1528909635.050 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0316.lzma.bak
2018-06-13T17:07:15.050Z,1528909635.050 [DataOverHttps](INFO): SBD MOMSN=8329595
2018-06-13T17:07:15.096Z,1528909635.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:15.122Z,1528909635.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:16.962Z,1528909636.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:16.991Z,1528909636.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:17.102Z,1528909637.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:17.144Z,1528909637.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:17.529Z,1528909637.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:17.547Z,1528909637.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:17.926Z,1528909637.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:17.952Z,1528909637.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:18.319Z,1528909638.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:18.355Z,1528909638.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:21.435Z,1528909641.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:21.453Z,1528909641.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:21.560Z,1528909641.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:21.612Z,1528909641.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:21.984Z,1528909641.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:22.010Z,1528909642.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:22.392Z,1528909642.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:22.416Z,1528909642.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:22.778Z,1528909642.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:22.808Z,1528909642.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:23.167Z,1528909643.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:23.217Z,1528909643.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:23.568Z,1528909643.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:23.600Z,1528909643.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:23.968Z,1528909643.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:24.001Z,1528909644.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:24.367Z,1528909644.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:24.404Z,1528909644.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:27.493Z,1528909647.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:27.511Z,1528909647.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:27.598Z,1528909647.598 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0317.lzma
2018-06-13T17:07:27.648Z,1528909647.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:27.666Z,1528909647.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:28.044Z,1528909648.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:28.068Z,1528909648.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:28.398Z,1528909648.398 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0317.lzma.bak
2018-06-13T17:07:28.398Z,1528909648.398 [DataOverHttps](INFO): SBD MOMSN=8329597
2018-06-13T17:07:28.446Z,1528909648.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:28.468Z,1528909648.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:30.299Z,1528909650.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:30.324Z,1528909650.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:30.348Z,1528909650.348 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T17:07:30.348Z,1528909650.348 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T17:07:30.348Z,1528909650.348 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T17:07:30.455Z,1528909650.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:30.496Z,1528909650.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:30.873Z,1528909650.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:30.902Z,1528909650.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:31.266Z,1528909651.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:31.299Z,1528909651.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:31.673Z,1528909651.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:31.706Z,1528909651.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:34.791Z,1528909654.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:34.809Z,1528909654.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:34.923Z,1528909654.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:34.957Z,1528909654.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:35.333Z,1528909655.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:35.361Z,1528909655.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:35.745Z,1528909655.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:35.764Z,1528909655.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:36.130Z,1528909656.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:36.158Z,1528909656.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:36.524Z,1528909656.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:36.617Z,1528909656.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:36.924Z,1528909656.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:36.988Z,1528909656.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:37.316Z,1528909657.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:37.335Z,1528909657.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:37.730Z,1528909657.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:37.820Z,1528909657.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:38.133Z,1528909658.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:38.169Z,1528909658.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:38.527Z,1528909658.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:38.561Z,1528909658.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:38.934Z,1528909658.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:38.952Z,1528909658.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:39.319Z,1528909659.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:39.353Z,1528909659.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:39.715Z,1528909659.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:39.743Z,1528909659.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:40.120Z,1528909660.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:40.147Z,1528909660.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:40.519Z,1528909660.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:40.557Z,1528909660.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:40.937Z,1528909660.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:40.955Z,1528909660.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:41.336Z,1528909661.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:41.364Z,1528909661.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:41.730Z,1528909661.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:41.769Z,1528909661.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:42.118Z,1528909662.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:42.150Z,1528909662.150 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:42.151Z,1528909662.151 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 273
2018-06-13T17:07:42.151Z,1528909662.151 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:07:42.152Z,1528909662.152 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:42.152Z,1528909662.152 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 273
2018-06-13T17:07:42.153Z,1528909662.153 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:07:42.154Z,1528909662.154 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:42.155Z,1528909662.155 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 273
2018-06-13T17:07:42.155Z,1528909662.155 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:07:42.241Z,1528909662.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:07:42.242Z,1528909662.242 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:07:42.242Z,1528909662.242 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:07:42.519Z,1528909662.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:42.629Z,1528909662.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:07:42.629Z,1528909662.629 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 273
2018-06-13T17:07:42.629Z,1528909662.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:07:42.630Z,1528909662.630 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 273
2018-06-13T17:07:42.630Z,1528909662.630 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:07:42.630Z,1528909662.630 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 273
2018-06-13T17:07:42.920Z,1528909662.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:42.961Z,1528909662.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:07:42.961Z,1528909662.961 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:07:42.961Z,1528909662.961 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:07:42.962Z,1528909662.962 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:07:42.962Z,1528909662.962 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:07:42.963Z,1528909662.963 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:07:42.963Z,1528909662.963 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:07:42.963Z,1528909662.963 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:07:42.964Z,1528909662.964 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:07:43.315Z,1528909663.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:43.344Z,1528909663.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:07:43.349Z,1528909663.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:43.740Z,1528909663.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:43.758Z,1528909663.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:07:43.759Z,1528909663.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:44.141Z,1528909664.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:44.159Z,1528909664.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:07:44.159Z,1528909664.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:44.525Z,1528909664.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:44.561Z,1528909664.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:07:44.562Z,1528909664.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:44.919Z,1528909664.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:44.960Z,1528909664.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:07:44.961Z,1528909664.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:45.319Z,1528909665.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:45.346Z,1528909665.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:07:45.347Z,1528909665.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:45.716Z,1528909665.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:45.756Z,1528909665.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:07:45.761Z,1528909665.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:46.120Z,1528909666.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:46.137Z,1528909666.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:07:46.138Z,1528909666.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:46.523Z,1528909666.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:46.540Z,1528909666.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:07:46.542Z,1528909666.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:46.933Z,1528909666.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:46.967Z,1528909666.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:07:46.968Z,1528909666.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:47.333Z,1528909667.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:47.351Z,1528909667.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:07:47.352Z,1528909667.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:47.734Z,1528909667.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:47.752Z,1528909667.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:07:47.753Z,1528909667.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:48.125Z,1528909668.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:48.142Z,1528909668.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:07:48.143Z,1528909668.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:48.524Z,1528909668.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:48.542Z,1528909668.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:07:48.543Z,1528909668.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:48.927Z,1528909668.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:48.944Z,1528909668.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:07:48.945Z,1528909668.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:49.325Z,1528909669.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:49.343Z,1528909669.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:07:49.344Z,1528909669.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:49.730Z,1528909669.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:49.752Z,1528909669.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:07:49.754Z,1528909669.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:50.133Z,1528909670.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:50.151Z,1528909670.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:07:50.152Z,1528909670.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:50.534Z,1528909670.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:50.551Z,1528909670.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:07:50.552Z,1528909670.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:50.923Z,1528909670.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:50.945Z,1528909670.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:07:50.946Z,1528909670.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:51.326Z,1528909671.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:51.343Z,1528909671.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:07:51.344Z,1528909671.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:51.719Z,1528909671.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:51.750Z,1528909671.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:07:51.751Z,1528909671.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:52.118Z,1528909672.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:52.143Z,1528909672.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:07:52.144Z,1528909672.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:52.522Z,1528909672.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:52.543Z,1528909672.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:07:52.544Z,1528909672.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:52.934Z,1528909672.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:52.952Z,1528909672.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:07:52.953Z,1528909672.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:53.338Z,1528909673.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:53.355Z,1528909673.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:07:53.356Z,1528909673.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:53.740Z,1528909673.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:53.757Z,1528909673.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:07:53.758Z,1528909673.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:54.125Z,1528909674.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:54.142Z,1528909674.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:07:54.143Z,1528909674.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:54.523Z,1528909674.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:54.546Z,1528909674.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:07:54.547Z,1528909674.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:54.920Z,1528909674.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:54.951Z,1528909674.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:07:54.952Z,1528909674.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:55.323Z,1528909675.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:55.346Z,1528909675.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:07:55.347Z,1528909675.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:55.735Z,1528909675.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:55.752Z,1528909675.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:07:55.754Z,1528909675.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:56.140Z,1528909676.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:56.158Z,1528909676.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:07:56.158Z,1528909676.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:56.535Z,1528909676.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:56.554Z,1528909676.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:07:56.555Z,1528909676.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:56.923Z,1528909676.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:56.946Z,1528909676.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:07:56.947Z,1528909676.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:57.327Z,1528909677.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:57.351Z,1528909677.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:07:57.352Z,1528909677.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:57.715Z,1528909677.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:57.750Z,1528909677.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:07:57.751Z,1528909677.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:58.123Z,1528909678.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:58.157Z,1528909678.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:07:58.158Z,1528909678.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:58.519Z,1528909678.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:58.559Z,1528909678.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:07:58.560Z,1528909678.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:58.935Z,1528909678.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:58.953Z,1528909678.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:07:58.954Z,1528909678.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:59.340Z,1528909679.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:59.358Z,1528909679.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:07:59.359Z,1528909679.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:07:59.740Z,1528909679.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:07:59.757Z,1528909679.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:07:59.758Z,1528909679.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:00.115Z,1528909680.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:00.142Z,1528909680.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:08:00.143Z,1528909680.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:00.519Z,1528909680.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:00.545Z,1528909680.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:08:00.546Z,1528909680.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:00.920Z,1528909680.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:00.952Z,1528909680.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:08:00.953Z,1528909680.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:01.319Z,1528909681.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:01.346Z,1528909681.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:08:01.347Z,1528909681.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:01.736Z,1528909681.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:01.753Z,1528909681.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:08:01.754Z,1528909681.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:02.140Z,1528909682.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:02.159Z,1528909682.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:02.532Z,1528909682.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:02.549Z,1528909682.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:02.919Z,1528909682.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:02.955Z,1528909682.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:03.331Z,1528909683.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:03.349Z,1528909683.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:03.715Z,1528909683.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:03.752Z,1528909683.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:04.120Z,1528909684.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:04.162Z,1528909684.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:04.519Z,1528909684.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:04.549Z,1528909684.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:04.930Z,1528909684.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:04.954Z,1528909684.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:05.338Z,1528909685.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:05.369Z,1528909685.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:05.741Z,1528909685.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:05.759Z,1528909685.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:06.119Z,1528909686.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:06.147Z,1528909686.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:06.519Z,1528909686.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:06.547Z,1528909686.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:06.924Z,1528909686.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:06.953Z,1528909686.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:07.315Z,1528909687.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:07.351Z,1528909687.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:07.735Z,1528909687.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:07.754Z,1528909687.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:08.140Z,1528909688.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:08.165Z,1528909688.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:08.535Z,1528909688.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:08.554Z,1528909688.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:08.920Z,1528909688.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:08.947Z,1528909688.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:09.319Z,1528909689.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:09.354Z,1528909689.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:09.719Z,1528909689.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:09.751Z,1528909689.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:10.120Z,1528909690.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:10.151Z,1528909690.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:10.519Z,1528909690.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:10.553Z,1528909690.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:10.936Z,1528909690.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:10.954Z,1528909690.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:11.339Z,1528909691.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:11.357Z,1528909691.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:11.745Z,1528909691.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:11.763Z,1528909691.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:12.115Z,1528909692.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:12.152Z,1528909692.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:12.519Z,1528909692.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:12.548Z,1528909692.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:12.920Z,1528909692.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:12.954Z,1528909692.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:13.315Z,1528909693.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:13.333Z,1528909693.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:13.730Z,1528909693.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:13.764Z,1528909693.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:14.137Z,1528909694.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:14.166Z,1528909694.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:14.537Z,1528909694.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:14.564Z,1528909694.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:14.919Z,1528909694.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:14.937Z,1528909694.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:15.324Z,1528909695.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:15.342Z,1528909695.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:15.723Z,1528909695.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:15.742Z,1528909695.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:16.124Z,1528909696.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:16.142Z,1528909696.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:16.523Z,1528909696.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:16.541Z,1528909696.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:16.934Z,1528909696.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:16.968Z,1528909696.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:17.334Z,1528909697.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:17.352Z,1528909697.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:17.734Z,1528909697.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:17.779Z,1528909697.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:18.125Z,1528909698.125 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:18.144Z,1528909698.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:18.526Z,1528909698.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:18.544Z,1528909698.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:18.927Z,1528909698.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:18.946Z,1528909698.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:19.325Z,1528909699.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:19.343Z,1528909699.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:19.730Z,1528909699.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:19.753Z,1528909699.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:20.133Z,1528909700.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:20.151Z,1528909700.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:20.531Z,1528909700.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:20.548Z,1528909700.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:20.932Z,1528909700.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:20.972Z,1528909700.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:21.330Z,1528909701.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:21.348Z,1528909701.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:21.719Z,1528909701.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:21.742Z,1528909701.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:22.123Z,1528909702.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:22.154Z,1528909702.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:22.530Z,1528909702.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:22.549Z,1528909702.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:22.934Z,1528909702.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:22.952Z,1528909702.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:23.333Z,1528909703.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:23.351Z,1528909703.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:23.733Z,1528909703.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:23.751Z,1528909703.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:24.122Z,1528909704.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:24.152Z,1528909704.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:24.529Z,1528909704.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:24.546Z,1528909704.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:24.924Z,1528909704.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:24.955Z,1528909704.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:25.326Z,1528909705.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:25.348Z,1528909705.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:25.738Z,1528909705.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:25.756Z,1528909705.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:26.139Z,1528909706.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:26.157Z,1528909706.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:26.538Z,1528909706.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:26.560Z,1528909706.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:26.925Z,1528909706.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:26.942Z,1528909706.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:27.326Z,1528909707.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:27.352Z,1528909707.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:27.726Z,1528909707.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:27.748Z,1528909707.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:28.130Z,1528909708.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:28.148Z,1528909708.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:28.523Z,1528909708.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:28.548Z,1528909708.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:28.931Z,1528909708.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:28.963Z,1528909708.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:29.338Z,1528909709.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:29.360Z,1528909709.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:29.739Z,1528909709.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:29.764Z,1528909709.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:30.126Z,1528909710.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:30.144Z,1528909710.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:30.531Z,1528909710.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:30.549Z,1528909710.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:30.933Z,1528909710.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:30.956Z,1528909710.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:34.041Z,1528909714.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:34.059Z,1528909714.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:34.195Z,1528909714.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:34.214Z,1528909714.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:34.598Z,1528909714.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:34.616Z,1528909714.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:34.998Z,1528909714.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:35.016Z,1528909715.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:35.383Z,1528909715.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:35.408Z,1528909715.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:35.786Z,1528909715.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:35.804Z,1528909715.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:36.179Z,1528909716.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:36.216Z,1528909716.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:36.584Z,1528909716.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:36.603Z,1528909716.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:36.000Z,1528909717.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:37.018Z,1528909717.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:37.398Z,1528909717.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:37.420Z,1528909717.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:37.794Z,1528909717.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:37.820Z,1528909717.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:38.186Z,1528909718.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:38.211Z,1528909718.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:38.575Z,1528909718.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:38.612Z,1528909718.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:38.981Z,1528909718.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:39.008Z,1528909719.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:39.379Z,1528909719.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:39.422Z,1528909719.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:39.795Z,1528909719.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:39.820Z,1528909719.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:40.200Z,1528909720.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:40.225Z,1528909720.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:40.600Z,1528909720.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:40.618Z,1528909720.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:40.976Z,1528909720.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:41.007Z,1528909721.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:41.379Z,1528909721.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:41.407Z,1528909721.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:41.779Z,1528909721.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:41.818Z,1528909721.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:42.179Z,1528909722.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:42.221Z,1528909722.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:42.579Z,1528909722.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:42.615Z,1528909722.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:43.001Z,1528909723.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:43.019Z,1528909723.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:43.396Z,1528909723.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:43.414Z,1528909723.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:43.795Z,1528909723.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:43.814Z,1528909723.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:44.179Z,1528909724.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:44.210Z,1528909724.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:44.579Z,1528909724.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:44.617Z,1528909724.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:44.978Z,1528909724.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:45.013Z,1528909725.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:45.379Z,1528909725.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:45.398Z,1528909725.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:45.789Z,1528909725.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:45.824Z,1528909725.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:46.193Z,1528909726.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:46.231Z,1528909726.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:46.599Z,1528909726.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:46.650Z,1528909726.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:46.981Z,1528909726.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:46.000Z,1528909727.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:47.382Z,1528909727.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:47.401Z,1528909727.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:47.783Z,1528909727.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:47.802Z,1528909727.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:48.179Z,1528909728.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:48.198Z,1528909728.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:48.583Z,1528909728.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:48.605Z,1528909728.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:48.994Z,1528909728.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:49.032Z,1528909729.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:49.393Z,1528909729.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:49.432Z,1528909729.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:49.791Z,1528909729.791 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:49.810Z,1528909729.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:50.186Z,1528909730.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:50.205Z,1528909730.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:50.579Z,1528909730.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:50.612Z,1528909730.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:50.986Z,1528909730.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:51.004Z,1528909731.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:51.383Z,1528909731.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:51.420Z,1528909731.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:51.795Z,1528909731.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:51.815Z,1528909731.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:52.198Z,1528909732.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:52.294Z,1528909732.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:52.600Z,1528909732.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:52.618Z,1528909732.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:52.985Z,1528909732.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:53.004Z,1528909733.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:53.374Z,1528909733.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:53.405Z,1528909733.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:53.779Z,1528909733.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:53.818Z,1528909733.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:54.179Z,1528909734.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:54.212Z,1528909734.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:54.580Z,1528909734.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:54.616Z,1528909734.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:55.001Z,1528909735.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:55.019Z,1528909735.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:55.393Z,1528909735.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:55.420Z,1528909735.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:55.789Z,1528909735.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:55.824Z,1528909735.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:56.183Z,1528909736.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:56.218Z,1528909736.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:56.579Z,1528909736.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:56.618Z,1528909736.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:56.978Z,1528909736.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:56.996Z,1528909736.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:57.383Z,1528909737.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:57.410Z,1528909737.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:57.802Z,1528909737.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:57.830Z,1528909737.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:58.198Z,1528909738.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:58.230Z,1528909738.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:58.598Z,1528909738.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:58.636Z,1528909738.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:58.983Z,1528909738.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:59.002Z,1528909739.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:59.384Z,1528909739.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:59.402Z,1528909739.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:08:59.784Z,1528909739.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:08:59.803Z,1528909739.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:00.183Z,1528909740.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:00.202Z,1528909740.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:00.583Z,1528909740.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:00.601Z,1528909740.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:00.999Z,1528909740.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:01.042Z,1528909741.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:01.395Z,1528909741.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:01.430Z,1528909741.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:01.794Z,1528909741.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:01.832Z,1528909741.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:02.181Z,1528909742.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:02.200Z,1528909742.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:02.582Z,1528909742.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:02.623Z,1528909742.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:02.985Z,1528909742.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:03.006Z,1528909743.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:03.382Z,1528909743.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:03.400Z,1528909743.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:03.786Z,1528909743.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:03.805Z,1528909743.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:04.203Z,1528909744.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:04.234Z,1528909744.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:04.598Z,1528909744.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:04.615Z,1528909744.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:04.985Z,1528909744.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:05.003Z,1528909745.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:05.383Z,1528909745.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:05.406Z,1528909745.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:05.788Z,1528909745.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:05.806Z,1528909745.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:06.188Z,1528909746.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:06.207Z,1528909746.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:06.588Z,1528909746.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:06.607Z,1528909746.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:06.991Z,1528909746.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:07.009Z,1528909747.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:07.393Z,1528909747.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:07.416Z,1528909747.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:07.798Z,1528909747.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:07.816Z,1528909747.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:08.188Z,1528909748.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:08.207Z,1528909748.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:08.579Z,1528909748.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:08.612Z,1528909748.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:08.986Z,1528909748.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:09.016Z,1528909749.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:09.388Z,1528909749.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:09.407Z,1528909749.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:09.792Z,1528909749.792 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:09.820Z,1528909749.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:10.198Z,1528909750.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:10.216Z,1528909750.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:10.598Z,1528909750.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:10.615Z,1528909750.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:10.986Z,1528909750.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:11.004Z,1528909751.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:11.389Z,1528909751.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:11.407Z,1528909751.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:11.775Z,1528909751.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:11.813Z,1528909751.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:12.185Z,1528909752.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:12.208Z,1528909752.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:12.586Z,1528909752.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:12.610Z,1528909752.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:13.000Z,1528909753.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:13.018Z,1528909753.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:13.398Z,1528909753.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:13.416Z,1528909753.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:13.799Z,1528909753.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:13.817Z,1528909753.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:14.188Z,1528909754.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:14.207Z,1528909754.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:14.588Z,1528909754.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:14.606Z,1528909754.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:14.985Z,1528909754.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:15.004Z,1528909755.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:15.375Z,1528909755.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:15.416Z,1528909755.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:15.799Z,1528909755.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:15.818Z,1528909755.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:16.198Z,1528909756.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:16.216Z,1528909756.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:16.599Z,1528909756.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:16.617Z,1528909756.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:16.988Z,1528909756.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:17.012Z,1528909757.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:17.384Z,1528909757.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:17.413Z,1528909757.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:17.782Z,1528909757.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:17.816Z,1528909757.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:18.188Z,1528909758.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:18.207Z,1528909758.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:18.575Z,1528909758.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:18.620Z,1528909758.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:19.002Z,1528909759.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:19.044Z,1528909759.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:19.398Z,1528909759.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:19.416Z,1528909759.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:19.799Z,1528909759.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:19.824Z,1528909759.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:20.175Z,1528909760.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:20.209Z,1528909760.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:20.594Z,1528909760.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:20.612Z,1528909760.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:20.986Z,1528909760.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:21.010Z,1528909761.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:21.388Z,1528909761.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:21.406Z,1528909761.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:21.799Z,1528909761.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:21.817Z,1528909761.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:22.200Z,1528909762.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:22.232Z,1528909762.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:22.599Z,1528909762.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:22.616Z,1528909762.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:22.989Z,1528909762.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:23.008Z,1528909763.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:23.383Z,1528909763.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:23.419Z,1528909763.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:23.804Z,1528909763.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:23.828Z,1528909763.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:24.201Z,1528909764.201 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:24.219Z,1528909764.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:24.600Z,1528909764.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:24.618Z,1528909764.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:24.980Z,1528909764.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:25.013Z,1528909765.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:25.394Z,1528909765.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:25.413Z,1528909765.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:25.799Z,1528909765.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:25.817Z,1528909765.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:26.204Z,1528909766.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:26.228Z,1528909766.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:26.603Z,1528909766.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:26.622Z,1528909766.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:26.980Z,1528909766.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:27.014Z,1528909767.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:27.390Z,1528909767.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:27.414Z,1528909767.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:27.798Z,1528909767.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:27.820Z,1528909767.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:28.200Z,1528909768.200 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:28.226Z,1528909768.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:28.604Z,1528909768.604 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:28.628Z,1528909768.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:28.992Z,1528909768.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:29.016Z,1528909769.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:29.386Z,1528909769.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:29.421Z,1528909769.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:29.763Z,1528909769.763 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T17:09:29.763Z,1528909769.763 [NAL9602] Data Fault, FailCount= 5
2018-06-13T17:09:29.763Z,1528909769.763 [NAL9602](ERROR): Data Fault
2018-06-13T17:09:29.780Z,1528909769.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:29.827Z,1528909769.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:29.905Z,1528909769.905 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T17:09:29.905Z,1528909769.905 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T17:09:30.162Z,1528909770.162 [NAL9602](INFO): Powering down
2018-06-13T17:09:30.180Z,1528909770.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:30.224Z,1528909770.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:30.315Z,1528909770.315 [CBIT](INFO): Critical error at 20180613T170929
2018-06-13T17:09:30.579Z,1528909770.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:30.620Z,1528909770.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:30.982Z,1528909770.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:31.018Z,1528909771.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:31.382Z,1528909771.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:31.419Z,1528909771.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:31.782Z,1528909771.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:31.825Z,1528909771.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:32.179Z,1528909772.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:32.221Z,1528909772.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:32.584Z,1528909772.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:32.627Z,1528909772.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:32.982Z,1528909772.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:33.019Z,1528909773.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:33.382Z,1528909773.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:33.427Z,1528909773.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:33.781Z,1528909773.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:33.820Z,1528909773.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:34.184Z,1528909774.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:34.228Z,1528909774.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:37.292Z,1528909777.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:37.327Z,1528909777.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:37.442Z,1528909777.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:37.486Z,1528909777.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:37.845Z,1528909777.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:37.872Z,1528909777.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:38.241Z,1528909778.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:38.279Z,1528909778.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:38.638Z,1528909778.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:38.672Z,1528909778.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:39.038Z,1528909779.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:39.080Z,1528909779.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:39.440Z,1528909779.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:39.457Z,1528909779.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:39.842Z,1528909779.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:39.860Z,1528909779.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:40.242Z,1528909780.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:40.269Z,1528909780.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:40.638Z,1528909780.638 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:40.656Z,1528909780.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:41.045Z,1528909781.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:41.063Z,1528909781.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:41.442Z,1528909781.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:41.464Z,1528909781.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:41.846Z,1528909781.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:41.863Z,1528909781.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:42.242Z,1528909782.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:42.261Z,1528909782.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:42.647Z,1528909782.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:42.664Z,1528909782.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:43.043Z,1528909783.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:43.060Z,1528909783.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:43.438Z,1528909783.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:43.456Z,1528909783.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:43.842Z,1528909783.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:43.860Z,1528909783.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:44.246Z,1528909784.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:44.264Z,1528909784.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:44.641Z,1528909784.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:44.660Z,1528909784.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:45.042Z,1528909785.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:45.061Z,1528909785.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:45.441Z,1528909785.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:45.459Z,1528909785.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:45.845Z,1528909785.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:45.863Z,1528909785.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:46.246Z,1528909786.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:46.264Z,1528909786.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:46.641Z,1528909786.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:46.659Z,1528909786.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:47.039Z,1528909787.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:47.058Z,1528909787.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:47.444Z,1528909787.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:47.462Z,1528909787.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:47.844Z,1528909787.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:47.861Z,1528909787.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:48.245Z,1528909788.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:48.263Z,1528909788.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:48.642Z,1528909788.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:48.660Z,1528909788.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:49.044Z,1528909789.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:49.063Z,1528909789.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:49.444Z,1528909789.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:49.462Z,1528909789.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:49.842Z,1528909789.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:49.860Z,1528909789.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:50.241Z,1528909790.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:50.259Z,1528909790.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:50.643Z,1528909790.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:50.660Z,1528909790.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:51.045Z,1528909791.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:51.063Z,1528909791.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:51.445Z,1528909791.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:51.462Z,1528909791.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:51.840Z,1528909791.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:51.858Z,1528909791.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:52.244Z,1528909792.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:52.262Z,1528909792.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:52.645Z,1528909792.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:52.662Z,1528909792.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:53.046Z,1528909793.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:53.063Z,1528909793.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:53.446Z,1528909793.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:53.463Z,1528909793.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:53.842Z,1528909793.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:53.863Z,1528909793.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:54.244Z,1528909794.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:54.262Z,1528909794.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:54.645Z,1528909794.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:54.663Z,1528909794.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:55.045Z,1528909795.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:55.062Z,1528909795.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:55.440Z,1528909795.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:55.462Z,1528909795.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:55.844Z,1528909795.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:55.862Z,1528909795.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:56.245Z,1528909796.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:56.263Z,1528909796.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:56.643Z,1528909796.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:56.661Z,1528909796.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:57.042Z,1528909797.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:57.064Z,1528909797.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:57.443Z,1528909797.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:57.461Z,1528909797.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:57.844Z,1528909797.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:57.862Z,1528909797.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:58.243Z,1528909798.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:58.269Z,1528909798.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:58.643Z,1528909798.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:58.667Z,1528909798.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:59.046Z,1528909799.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:59.064Z,1528909799.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:59.443Z,1528909799.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:59.485Z,1528909799.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:09:59.846Z,1528909799.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:09:59.863Z,1528909799.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:00.243Z,1528909800.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:00.291Z,1528909800.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:00.644Z,1528909800.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:00.688Z,1528909800.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:01.046Z,1528909801.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:01.081Z,1528909801.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:01.444Z,1528909801.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:01.462Z,1528909801.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:01.842Z,1528909801.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:01.887Z,1528909801.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:02.241Z,1528909802.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:02.274Z,1528909802.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:02.643Z,1528909802.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:02.661Z,1528909802.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:03.044Z,1528909803.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:03.078Z,1528909803.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:03.444Z,1528909803.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:03.474Z,1528909803.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:03.840Z,1528909803.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:03.891Z,1528909803.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:04.246Z,1528909804.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:04.287Z,1528909804.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:04.648Z,1528909804.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:04.665Z,1528909804.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:05.044Z,1528909805.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:05.090Z,1528909805.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:05.444Z,1528909805.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:05.468Z,1528909805.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:05.847Z,1528909805.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:05.864Z,1528909805.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:06.250Z,1528909806.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:06.267Z,1528909806.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:06.644Z,1528909806.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:06.691Z,1528909806.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:07.044Z,1528909807.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:07.066Z,1528909807.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:07.441Z,1528909807.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:07.462Z,1528909807.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:07.844Z,1528909807.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:07.870Z,1528909807.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:08.245Z,1528909808.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:08.276Z,1528909808.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:08.641Z,1528909808.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:08.664Z,1528909808.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:09.043Z,1528909809.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:09.071Z,1528909809.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:09.449Z,1528909809.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:09.466Z,1528909809.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:09.841Z,1528909809.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:09.877Z,1528909809.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:10.242Z,1528909810.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:10.271Z,1528909810.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:10.646Z,1528909810.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:10.667Z,1528909810.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:11.054Z,1528909811.054 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:11.072Z,1528909811.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:11.442Z,1528909811.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:11.494Z,1528909811.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:11.848Z,1528909811.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:11.871Z,1528909811.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:12.244Z,1528909812.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:12.267Z,1528909812.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:12.646Z,1528909812.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:12.670Z,1528909812.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:13.038Z,1528909813.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:13.077Z,1528909813.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:13.441Z,1528909813.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:13.461Z,1528909813.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:13.842Z,1528909813.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:13.880Z,1528909813.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:14.248Z,1528909814.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:14.266Z,1528909814.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:14.641Z,1528909814.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:14.697Z,1528909814.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:15.044Z,1528909815.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:15.073Z,1528909815.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:15.444Z,1528909815.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:15.472Z,1528909815.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:15.840Z,1528909815.840 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:15.863Z,1528909815.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:16.242Z,1528909816.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:16.293Z,1528909816.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:16.644Z,1528909816.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:16.661Z,1528909816.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:17.045Z,1528909817.045 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:17.068Z,1528909817.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:17.442Z,1528909817.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:17.470Z,1528909817.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:17.845Z,1528909817.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:17.874Z,1528909817.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:18.245Z,1528909818.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:18.263Z,1528909818.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:18.642Z,1528909818.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:18.684Z,1528909818.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:19.044Z,1528909819.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:19.067Z,1528909819.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:19.441Z,1528909819.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:19.477Z,1528909819.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:19.844Z,1528909819.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:19.863Z,1528909819.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:20.248Z,1528909820.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:20.271Z,1528909820.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:20.642Z,1528909820.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:20.665Z,1528909820.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:21.043Z,1528909821.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:21.066Z,1528909821.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:21.441Z,1528909821.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:21.458Z,1528909821.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:21.842Z,1528909821.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:21.862Z,1528909821.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:22.242Z,1528909822.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:22.279Z,1528909822.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:22.645Z,1528909822.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:22.663Z,1528909822.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:23.041Z,1528909823.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:23.064Z,1528909823.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:23.442Z,1528909823.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:23.486Z,1528909823.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:23.844Z,1528909823.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:23.867Z,1528909823.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:24.244Z,1528909824.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:24.263Z,1528909824.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:24.642Z,1528909824.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:24.667Z,1528909824.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:25.044Z,1528909825.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:25.061Z,1528909825.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:25.441Z,1528909825.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:25.462Z,1528909825.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:25.842Z,1528909825.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:25.874Z,1528909825.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:26.244Z,1528909826.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:26.261Z,1528909826.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:26.641Z,1528909826.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:26.659Z,1528909826.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:27.044Z,1528909827.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:27.067Z,1528909827.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:27.438Z,1528909827.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:27.471Z,1528909827.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:27.841Z,1528909827.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:27.859Z,1528909827.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:28.237Z,1528909828.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:28.269Z,1528909828.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:28.644Z,1528909828.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:28.663Z,1528909828.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:29.044Z,1528909829.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:29.062Z,1528909829.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:29.442Z,1528909829.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:29.476Z,1528909829.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:29.844Z,1528909829.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:29.861Z,1528909829.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:30.244Z,1528909830.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:30.262Z,1528909830.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:30.648Z,1528909830.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:30.666Z,1528909830.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:31.048Z,1528909831.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:31.065Z,1528909831.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:34.160Z,1528909834.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:34.178Z,1528909834.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:34.285Z,1528909834.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:34.333Z,1528909834.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:34.699Z,1528909834.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:34.716Z,1528909834.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:35.095Z,1528909835.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:35.113Z,1528909835.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:35.482Z,1528909835.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:35.519Z,1528909835.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:35.882Z,1528909835.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:35.923Z,1528909835.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:36.292Z,1528909836.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:36.319Z,1528909836.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:36.689Z,1528909836.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:36.720Z,1528909836.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:37.087Z,1528909837.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:37.125Z,1528909837.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:37.482Z,1528909837.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:37.520Z,1528909837.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:37.887Z,1528909837.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:37.925Z,1528909837.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:38.286Z,1528909838.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:38.314Z,1528909838.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:38.682Z,1528909838.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:38.720Z,1528909838.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:39.087Z,1528909839.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:39.122Z,1528909839.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:39.482Z,1528909839.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:39.526Z,1528909839.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:39.884Z,1528909839.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:39.912Z,1528909839.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:40.288Z,1528909840.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:40.328Z,1528909840.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:40.685Z,1528909840.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:40.730Z,1528909840.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:41.089Z,1528909841.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:41.127Z,1528909841.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:41.490Z,1528909841.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:41.520Z,1528909841.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:41.885Z,1528909841.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:41.932Z,1528909841.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:42.285Z,1528909842.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:42.305Z,1528909842.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:42.690Z,1528909842.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:42.729Z,1528909842.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:43.092Z,1528909843.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:43.110Z,1528909843.110 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:43.110Z,1528909843.110 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 274
2018-06-13T17:10:43.110Z,1528909843.110 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:10:43.112Z,1528909843.112 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:43.112Z,1528909843.112 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 274
2018-06-13T17:10:43.112Z,1528909843.112 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:10:43.114Z,1528909843.114 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:43.114Z,1528909843.114 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 274
2018-06-13T17:10:43.114Z,1528909843.114 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:10:43.226Z,1528909843.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:10:43.226Z,1528909843.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:10:43.226Z,1528909843.226 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:10:43.488Z,1528909843.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:43.609Z,1528909843.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:10:43.609Z,1528909843.609 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 274
2018-06-13T17:10:43.610Z,1528909843.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:10:43.610Z,1528909843.610 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 274
2018-06-13T17:10:43.610Z,1528909843.610 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:10:43.610Z,1528909843.610 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 274
2018-06-13T17:10:43.890Z,1528909843.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:43.927Z,1528909843.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:10:43.928Z,1528909843.928 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:10:43.928Z,1528909843.928 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:10:43.928Z,1528909843.928 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:10:43.933Z,1528909843.933 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:10:43.933Z,1528909843.933 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:10:43.934Z,1528909843.934 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:10:43.934Z,1528909843.934 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:10:43.934Z,1528909843.934 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:10:44.290Z,1528909844.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:44.312Z,1528909844.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:10:44.313Z,1528909844.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:44.691Z,1528909844.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:44.711Z,1528909844.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:10:44.712Z,1528909844.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:45.092Z,1528909845.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:45.146Z,1528909845.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:10:45.147Z,1528909845.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:45.490Z,1528909845.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:45.509Z,1528909845.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:10:45.510Z,1528909845.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:45.888Z,1528909845.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:45.911Z,1528909845.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:10:45.912Z,1528909845.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:46.294Z,1528909846.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:46.313Z,1528909846.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:10:46.314Z,1528909846.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:46.692Z,1528909846.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:46.724Z,1528909846.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:10:46.726Z,1528909846.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:47.090Z,1528909847.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:47.108Z,1528909847.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:10:47.109Z,1528909847.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:47.492Z,1528909847.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:47.514Z,1528909847.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:10:47.515Z,1528909847.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:47.895Z,1528909847.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:47.915Z,1528909847.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:10:47.915Z,1528909847.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:48.290Z,1528909848.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:48.327Z,1528909848.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:10:48.328Z,1528909848.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:48.692Z,1528909848.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:48.709Z,1528909848.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:10:48.710Z,1528909848.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:49.092Z,1528909849.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:49.115Z,1528909849.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:10:49.116Z,1528909849.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:49.488Z,1528909849.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:49.511Z,1528909849.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:10:49.511Z,1528909849.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:49.892Z,1528909849.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:49.910Z,1528909849.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:10:49.911Z,1528909849.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:50.285Z,1528909850.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:50.323Z,1528909850.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:10:50.324Z,1528909850.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:50.689Z,1528909850.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:50.709Z,1528909850.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:10:50.711Z,1528909850.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:51.092Z,1528909851.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:51.114Z,1528909851.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:10:51.115Z,1528909851.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:51.492Z,1528909851.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:51.510Z,1528909851.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:10:51.511Z,1528909851.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:51.888Z,1528909851.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:51.906Z,1528909851.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:10:51.907Z,1528909851.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:52.293Z,1528909852.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:52.314Z,1528909852.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:10:52.316Z,1528909852.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:52.693Z,1528909852.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:52.716Z,1528909852.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:10:52.717Z,1528909852.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:53.091Z,1528909853.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:53.108Z,1528909853.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:10:53.109Z,1528909853.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:53.492Z,1528909853.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:53.510Z,1528909853.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:10:53.511Z,1528909853.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:53.893Z,1528909853.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:53.912Z,1528909853.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:10:53.914Z,1528909853.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:54.292Z,1528909854.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:54.315Z,1528909854.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:10:54.316Z,1528909854.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:54.692Z,1528909854.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:54.711Z,1528909854.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:10:54.712Z,1528909854.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:55.096Z,1528909855.096 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:55.114Z,1528909855.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:10:55.115Z,1528909855.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:55.492Z,1528909855.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:55.528Z,1528909855.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:10:55.545Z,1528909855.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:55.893Z,1528909855.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:55.916Z,1528909855.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:10:55.917Z,1528909855.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:56.293Z,1528909856.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:56.311Z,1528909856.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:10:56.312Z,1528909856.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:56.693Z,1528909856.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:56.710Z,1528909856.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:10:56.711Z,1528909856.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:57.093Z,1528909857.093 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:57.111Z,1528909857.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:10:57.112Z,1528909857.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:57.493Z,1528909857.493 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:57.516Z,1528909857.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:10:57.517Z,1528909857.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:57.890Z,1528909857.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:57.908Z,1528909857.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:10:57.910Z,1528909857.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:58.292Z,1528909858.292 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:58.310Z,1528909858.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:10:58.311Z,1528909858.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:58.685Z,1528909858.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:58.722Z,1528909858.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:10:58.724Z,1528909858.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:59.091Z,1528909859.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:59.111Z,1528909859.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:10:59.113Z,1528909859.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:59.492Z,1528909859.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:59.510Z,1528909859.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:10:59.511Z,1528909859.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:10:59.892Z,1528909859.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:10:59.910Z,1528909859.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:10:59.911Z,1528909859.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:00.291Z,1528909860.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:00.308Z,1528909860.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:11:00.309Z,1528909860.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:00.694Z,1528909860.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:00.713Z,1528909860.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:11:00.715Z,1528909860.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:01.092Z,1528909861.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:01.110Z,1528909861.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:11:01.111Z,1528909861.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:01.490Z,1528909861.490 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:01.508Z,1528909861.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:11:01.510Z,1528909861.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:01.893Z,1528909861.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:01.911Z,1528909861.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:11:01.912Z,1528909861.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:02.293Z,1528909862.293 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:02.311Z,1528909862.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:11:02.311Z,1528909862.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:02.688Z,1528909862.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:02.706Z,1528909862.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:11:02.707Z,1528909862.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:03.092Z,1528909863.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:03.116Z,1528909863.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:03.487Z,1528909863.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:03.511Z,1528909863.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:03.889Z,1528909863.889 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:03.907Z,1528909863.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:04.295Z,1528909864.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:04.313Z,1528909864.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:04.689Z,1528909864.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:04.707Z,1528909864.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:05.083Z,1528909865.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:05.119Z,1528909865.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:05.487Z,1528909865.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:05.529Z,1528909865.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:05.882Z,1528909865.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:05.912Z,1528909865.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:06.282Z,1528909866.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:06.316Z,1528909866.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:06.686Z,1528909866.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:06.721Z,1528909866.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:07.086Z,1528909867.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:07.104Z,1528909867.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:07.482Z,1528909867.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:07.500Z,1528909867.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:07.885Z,1528909867.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:07.908Z,1528909867.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:08.290Z,1528909868.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:08.308Z,1528909868.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:08.689Z,1528909868.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:08.707Z,1528909868.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:09.090Z,1528909869.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:09.108Z,1528909869.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:09.487Z,1528909869.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:09.504Z,1528909869.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:09.887Z,1528909869.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:09.906Z,1528909869.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:10.289Z,1528909870.289 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:10.307Z,1528909870.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:10.685Z,1528909870.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:10.711Z,1528909870.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:11.088Z,1528909871.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:11.112Z,1528909871.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:11.494Z,1528909871.494 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:11.513Z,1528909871.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:11.888Z,1528909871.888 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:11.906Z,1528909871.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:12.287Z,1528909872.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:12.305Z,1528909872.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:12.691Z,1528909872.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:12.709Z,1528909872.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:13.088Z,1528909873.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:13.112Z,1528909873.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:13.488Z,1528909873.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:13.506Z,1528909873.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:13.891Z,1528909873.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:13.921Z,1528909873.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:14.288Z,1528909874.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:14.312Z,1528909874.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:14.688Z,1528909874.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:14.706Z,1528909874.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:15.092Z,1528909875.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:15.110Z,1528909875.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:15.488Z,1528909875.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:15.506Z,1528909875.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:15.890Z,1528909875.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:15.909Z,1528909875.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:16.291Z,1528909876.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:16.321Z,1528909876.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:16.682Z,1528909876.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:16.710Z,1528909876.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:17.082Z,1528909877.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:17.117Z,1528909877.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:17.486Z,1528909877.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:17.522Z,1528909877.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:17.882Z,1528909877.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:17.910Z,1528909877.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:18.286Z,1528909878.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:18.314Z,1528909878.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:18.687Z,1528909878.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:18.714Z,1528909878.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:19.082Z,1528909879.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:19.116Z,1528909879.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:19.485Z,1528909879.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:19.512Z,1528909879.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:19.886Z,1528909879.886 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:19.920Z,1528909879.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:20.282Z,1528909880.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:20.316Z,1528909880.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:20.686Z,1528909880.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:20.713Z,1528909880.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:21.086Z,1528909881.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:21.124Z,1528909881.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:21.482Z,1528909881.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:21.510Z,1528909881.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:21.885Z,1528909881.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:21.912Z,1528909881.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:22.286Z,1528909882.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:22.320Z,1528909882.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:22.682Z,1528909882.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:22.710Z,1528909882.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:23.085Z,1528909883.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:23.112Z,1528909883.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:23.496Z,1528909883.496 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:23.520Z,1528909883.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:23.882Z,1528909883.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:23.909Z,1528909883.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:24.282Z,1528909884.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:24.309Z,1528909884.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:24.685Z,1528909884.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:24.716Z,1528909884.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:25.082Z,1528909885.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:25.117Z,1528909885.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:25.487Z,1528909885.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:25.514Z,1528909885.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:25.885Z,1528909885.885 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:25.919Z,1528909885.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:26.282Z,1528909886.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:26.310Z,1528909886.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:26.687Z,1528909886.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:26.720Z,1528909886.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:27.087Z,1528909887.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:27.120Z,1528909887.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:27.482Z,1528909887.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:27.510Z,1528909887.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:27.887Z,1528909887.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:27.914Z,1528909887.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:28.297Z,1528909888.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:28.316Z,1528909888.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:28.682Z,1528909888.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:28.709Z,1528909888.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:29.087Z,1528909889.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:29.114Z,1528909889.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:29.486Z,1528909889.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:29.520Z,1528909889.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:29.882Z,1528909889.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:29.909Z,1528909889.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:29.997Z,1528909889.997 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T17:11:29.997Z,1528909889.997 [NAL9602] No Fault, FailCount= 5
2018-06-13T17:11:30.267Z,1528909890.267 [NAL9602](INFO): Powering up NAL9602
2018-06-13T17:11:30.286Z,1528909890.286 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:30.322Z,1528909890.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:30.696Z,1528909890.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:30.714Z,1528909890.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:31.095Z,1528909891.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:31.113Z,1528909891.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:34.209Z,1528909894.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:34.228Z,1528909894.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:34.359Z,1528909894.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:34.386Z,1528909894.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:34.756Z,1528909894.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:34.808Z,1528909894.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:35.157Z,1528909895.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:35.175Z,1528909895.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:35.550Z,1528909895.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:35.573Z,1528909895.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:35.948Z,1528909895.948 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:35.977Z,1528909895.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:36.353Z,1528909896.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:36.371Z,1528909896.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:36.750Z,1528909896.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:36.773Z,1528909896.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:37.148Z,1528909897.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:37.166Z,1528909897.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:37.552Z,1528909897.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:37.574Z,1528909897.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:37.950Z,1528909897.950 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:37.973Z,1528909897.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:38.353Z,1528909898.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:38.371Z,1528909898.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:38.752Z,1528909898.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:38.770Z,1528909898.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:39.150Z,1528909899.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:39.178Z,1528909899.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:39.548Z,1528909899.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:39.566Z,1528909899.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:39.943Z,1528909899.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:39.970Z,1528909899.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:40.357Z,1528909900.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:40.376Z,1528909900.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:40.760Z,1528909900.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:40.783Z,1528909900.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:41.131Z,1528909901.131 [NAL9602](INFO): NAL9602 initialized
2018-06-13T17:11:41.148Z,1528909901.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:41.179Z,1528909901.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:41.547Z,1528909901.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:41.587Z,1528909901.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:41.958Z,1528909901.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:41.996Z,1528909901.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:42.368Z,1528909902.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:42.392Z,1528909902.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:42.769Z,1528909902.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:42.792Z,1528909902.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:43.144Z,1528909903.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:43.174Z,1528909903.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:43.547Z,1528909903.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:43.580Z,1528909903.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:43.968Z,1528909903.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:43.996Z,1528909903.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:44.367Z,1528909904.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:44.386Z,1528909904.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:44.763Z,1528909904.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:44.782Z,1528909904.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:45.148Z,1528909905.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:45.182Z,1528909905.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:45.543Z,1528909905.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:45.577Z,1528909905.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:45.957Z,1528909905.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:45.986Z,1528909905.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:46.361Z,1528909906.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:46.392Z,1528909906.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:46.753Z,1528909906.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:46.797Z,1528909906.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:47.150Z,1528909907.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:47.168Z,1528909907.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:47.551Z,1528909907.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:47.568Z,1528909907.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:47.957Z,1528909907.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:47.976Z,1528909907.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:48.365Z,1528909908.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:48.406Z,1528909908.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:48.761Z,1528909908.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:48.779Z,1528909908.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:49.155Z,1528909909.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:49.174Z,1528909909.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:49.550Z,1528909909.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:49.568Z,1528909909.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:49.963Z,1528909909.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:49.981Z,1528909909.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:50.362Z,1528909910.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:50.380Z,1528909910.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:50.760Z,1528909910.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:50.779Z,1528909910.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:51.154Z,1528909911.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:51.172Z,1528909911.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:51.553Z,1528909911.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:51.572Z,1528909911.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:51.959Z,1528909911.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:51.978Z,1528909911.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:52.367Z,1528909912.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:52.386Z,1528909912.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:52.767Z,1528909912.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:52.787Z,1528909912.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:53.143Z,1528909913.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:53.180Z,1528909913.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:53.547Z,1528909913.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:53.575Z,1528909913.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:53.964Z,1528909913.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:53.982Z,1528909913.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:54.363Z,1528909914.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:54.381Z,1528909914.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:54.768Z,1528909914.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:54.787Z,1528909914.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:55.147Z,1528909915.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:55.176Z,1528909915.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:55.543Z,1528909915.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:55.579Z,1528909915.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:55.968Z,1528909915.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:55.992Z,1528909915.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:56.367Z,1528909916.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:56.385Z,1528909916.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:56.760Z,1528909916.760 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:56.779Z,1528909916.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:57.148Z,1528909917.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:57.176Z,1528909917.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:57.551Z,1528909917.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:57.579Z,1528909917.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:57.960Z,1528909917.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:57.978Z,1528909917.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:58.364Z,1528909918.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:58.388Z,1528909918.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:58.763Z,1528909918.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:58.781Z,1528909918.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:59.143Z,1528909919.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:59.182Z,1528909919.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:59.548Z,1528909919.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:59.585Z,1528909919.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:11:59.967Z,1528909919.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:11:59.985Z,1528909919.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:00.364Z,1528909920.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:00.382Z,1528909920.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:00.761Z,1528909920.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:00.786Z,1528909920.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:01.144Z,1528909921.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:01.180Z,1528909921.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:01.543Z,1528909921.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:01.573Z,1528909921.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:01.968Z,1528909921.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:01.989Z,1528909921.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:02.357Z,1528909922.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:02.392Z,1528909922.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:02.753Z,1528909922.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:02.787Z,1528909922.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:03.148Z,1528909923.148 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:03.191Z,1528909923.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:03.547Z,1528909923.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:03.592Z,1528909923.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:03.957Z,1528909923.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:03.987Z,1528909923.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:04.365Z,1528909924.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:04.398Z,1528909924.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:04.761Z,1528909924.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:04.796Z,1528909924.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:05.150Z,1528909925.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:05.168Z,1528909925.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:05.550Z,1528909925.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:05.568Z,1528909925.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:05.961Z,1528909925.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:05.980Z,1528909925.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:06.362Z,1528909926.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:06.380Z,1528909926.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:06.761Z,1528909926.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:06.779Z,1528909926.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:07.151Z,1528909927.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:07.184Z,1528909927.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:07.552Z,1528909927.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:07.571Z,1528909927.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:07.961Z,1528909927.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:07.979Z,1528909927.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:08.361Z,1528909928.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:08.380Z,1528909928.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:08.758Z,1528909928.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:08.776Z,1528909928.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:09.158Z,1528909929.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:09.176Z,1528909929.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:09.551Z,1528909929.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:09.577Z,1528909929.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:09.959Z,1528909929.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:09.977Z,1528909929.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:10.362Z,1528909930.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:10.380Z,1528909930.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:10.762Z,1528909930.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:10.780Z,1528909930.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:11.154Z,1528909931.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:11.172Z,1528909931.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:11.551Z,1528909931.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:11.575Z,1528909931.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:11.963Z,1528909931.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:11.988Z,1528909931.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:12.362Z,1528909932.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:12.380Z,1528909932.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:12.762Z,1528909932.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:12.780Z,1528909932.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:13.151Z,1528909933.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:13.176Z,1528909933.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:13.549Z,1528909933.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:13.567Z,1528909933.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:13.954Z,1528909933.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:13.972Z,1528909933.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:14.362Z,1528909934.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:14.388Z,1528909934.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:14.763Z,1528909934.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:14.781Z,1528909934.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:15.167Z,1528909935.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:15.186Z,1528909935.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:15.551Z,1528909935.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:15.575Z,1528909935.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:15.943Z,1528909935.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:15.980Z,1528909935.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:16.351Z,1528909936.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:16.376Z,1528909936.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:16.753Z,1528909936.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:16.771Z,1528909936.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:17.159Z,1528909937.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:17.177Z,1528909937.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:17.567Z,1528909937.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:17.585Z,1528909937.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:17.960Z,1528909937.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:17.979Z,1528909937.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:18.353Z,1528909938.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:18.371Z,1528909938.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:18.754Z,1528909938.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:18.776Z,1528909938.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:19.151Z,1528909939.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:19.176Z,1528909939.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:19.543Z,1528909939.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:19.578Z,1528909939.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:19.951Z,1528909939.951 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:19.980Z,1528909939.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:20.358Z,1528909940.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:20.382Z,1528909940.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:20.764Z,1528909940.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:20.782Z,1528909940.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:21.168Z,1528909941.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:21.186Z,1528909941.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:21.547Z,1528909941.547 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:21.576Z,1528909941.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:21.947Z,1528909941.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:21.975Z,1528909941.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:22.348Z,1528909942.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:22.388Z,1528909942.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:22.748Z,1528909942.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:22.777Z,1528909942.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:23.164Z,1528909943.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:23.182Z,1528909943.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:23.569Z,1528909943.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:23.592Z,1528909943.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:23.963Z,1528909943.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:23.982Z,1528909943.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:24.343Z,1528909944.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:24.380Z,1528909944.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:24.747Z,1528909944.747 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:24.782Z,1528909944.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:25.143Z,1528909945.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:25.178Z,1528909945.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:25.544Z,1528909945.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:25.574Z,1528909945.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:25.947Z,1528909945.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:25.964Z,1528909945.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:26.357Z,1528909946.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:26.397Z,1528909946.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:26.761Z,1528909946.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:26.790Z,1528909946.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:27.165Z,1528909947.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:27.194Z,1528909947.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:27.548Z,1528909947.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:27.566Z,1528909947.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:27.947Z,1528909947.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:27.965Z,1528909947.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:28.352Z,1528909948.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:28.370Z,1528909948.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:28.746Z,1528909948.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:28.772Z,1528909948.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:29.154Z,1528909949.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:29.172Z,1528909949.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:29.563Z,1528909949.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:29.597Z,1528909949.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:29.958Z,1528909949.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:29.976Z,1528909949.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:30.349Z,1528909950.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:30.368Z,1528909950.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:30.754Z,1528909950.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:30.773Z,1528909950.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:30.776Z,1528909950.776 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T17:12:30.776Z,1528909950.776 [Default:CheckIn:C.Wait] Stopped
2018-06-13T17:12:30.776Z,1528909950.776 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T17:12:30.776Z,1528909950.776 [Default:CheckIn:D] Running Loop=1
2018-06-13T17:12:31.150Z,1528909951.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:31.180Z,1528909951.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:31.187Z,1528909951.187 [Default:CheckIn:D] Stopped
2018-06-13T17:12:31.187Z,1528909951.187 [Default:CheckIn:E] Running Loop=1
2018-06-13T17:12:34.266Z,1528909954.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:34.284Z,1528909954.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:34.287Z,1528909954.287 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 825.295703 min 
2018-06-13T17:12:34.288Z,1528909954.288 [Default:CheckIn:E] Stopped
2018-06-13T17:12:34.288Z,1528909954.288 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T17:12:34.288Z,1528909954.288 [Default:CheckIn] Stopped
2018-06-13T17:12:34.288Z,1528909954.288 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T17:12:34.288Z,1528909954.288 [Default:CheckIn](INFO): Running loop #80
2018-06-13T17:12:34.288Z,1528909954.288 [Default:CheckIn] Running Loop=80
2018-06-13T17:12:34.288Z,1528909954.288 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T17:12:34.289Z,1528909954.289 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T17:12:34.426Z,1528909954.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:34.472Z,1528909954.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:34.833Z,1528909954.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:34.875Z,1528909954.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:35.241Z,1528909955.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:35.284Z,1528909955.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:35.633Z,1528909955.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:35.651Z,1528909955.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:36.024Z,1528909956.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:36.042Z,1528909956.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:36.424Z,1528909956.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:36.442Z,1528909956.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:36.824Z,1528909956.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:36.858Z,1528909956.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:37.234Z,1528909957.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:37.252Z,1528909957.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:37.637Z,1528909957.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:37.655Z,1528909957.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:38.036Z,1528909958.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:38.054Z,1528909958.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:38.420Z,1528909958.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:38.454Z,1528909958.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:38.815Z,1528909958.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:38.860Z,1528909958.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:39.219Z,1528909959.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:39.256Z,1528909959.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:39.619Z,1528909959.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:39.658Z,1528909959.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:40.040Z,1528909960.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:40.059Z,1528909960.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:40.438Z,1528909960.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:40.456Z,1528909960.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:40.835Z,1528909960.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:40.853Z,1528909960.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:41.216Z,1528909961.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:41.252Z,1528909961.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:41.615Z,1528909961.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:41.653Z,1528909961.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:42.040Z,1528909962.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:42.058Z,1528909962.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:42.430Z,1528909962.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:42.467Z,1528909962.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:42.829Z,1528909962.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:42.863Z,1528909962.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:43.220Z,1528909963.220 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:43.246Z,1528909963.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:43.619Z,1528909963.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:43.653Z,1528909963.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:44.029Z,1528909964.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:44.063Z,1528909964.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:44.433Z,1528909964.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:44.468Z,1528909964.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:44.829Z,1528909964.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:44.859Z,1528909964.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:45.224Z,1528909965.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:45.242Z,1528909965.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:45.622Z,1528909965.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:45.640Z,1528909965.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:46.033Z,1528909966.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:46.066Z,1528909966.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:46.433Z,1528909966.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:46.467Z,1528909966.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:46.833Z,1528909966.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:46.867Z,1528909966.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:47.223Z,1528909967.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:47.241Z,1528909967.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:47.622Z,1528909967.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:47.640Z,1528909967.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:48.033Z,1528909968.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:48.067Z,1528909968.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:48.433Z,1528909968.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:48.466Z,1528909968.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:48.833Z,1528909968.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:48.866Z,1528909968.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:49.222Z,1528909969.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:49.241Z,1528909969.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:49.622Z,1528909969.622 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:49.639Z,1528909969.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:50.033Z,1528909970.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:50.067Z,1528909970.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:50.433Z,1528909970.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:50.451Z,1528909970.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:50.833Z,1528909970.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:50.851Z,1528909970.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:51.224Z,1528909971.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:51.242Z,1528909971.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:51.624Z,1528909971.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:51.642Z,1528909971.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:52.034Z,1528909972.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:52.052Z,1528909972.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:52.433Z,1528909972.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:52.451Z,1528909972.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:52.830Z,1528909972.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:52.848Z,1528909972.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:53.225Z,1528909973.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:53.243Z,1528909973.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:53.624Z,1528909973.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:53.648Z,1528909973.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:54.029Z,1528909974.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:54.049Z,1528909974.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:54.433Z,1528909974.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:54.451Z,1528909974.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:54.834Z,1528909974.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:54.851Z,1528909974.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:55.226Z,1528909975.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:55.244Z,1528909975.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:55.626Z,1528909975.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:55.643Z,1528909975.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:56.030Z,1528909976.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:56.052Z,1528909976.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:56.433Z,1528909976.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:56.451Z,1528909976.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:56.832Z,1528909976.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:56.850Z,1528909976.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:57.228Z,1528909977.228 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:57.246Z,1528909977.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:57.624Z,1528909977.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:57.643Z,1528909977.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:58.030Z,1528909978.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:58.048Z,1528909978.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:58.433Z,1528909978.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:58.451Z,1528909978.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:58.831Z,1528909978.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:58.856Z,1528909978.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:59.226Z,1528909979.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:59.244Z,1528909979.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:12:59.623Z,1528909979.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:12:59.653Z,1528909979.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:00.034Z,1528909980.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:00.052Z,1528909980.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:00.434Z,1528909980.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:00.452Z,1528909980.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:00.834Z,1528909980.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:00.852Z,1528909980.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:01.230Z,1528909981.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:01.248Z,1528909981.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:01.623Z,1528909981.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:01.641Z,1528909981.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:02.034Z,1528909982.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:02.051Z,1528909982.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:02.434Z,1528909982.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:02.452Z,1528909982.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:02.835Z,1528909982.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:02.853Z,1528909982.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:03.219Z,1528909983.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:03.242Z,1528909983.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:03.627Z,1528909983.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:03.645Z,1528909983.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:04.026Z,1528909984.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:04.044Z,1528909984.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:04.432Z,1528909984.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:04.450Z,1528909984.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:04.835Z,1528909984.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:04.853Z,1528909984.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:05.235Z,1528909985.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:05.253Z,1528909985.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:05.625Z,1528909985.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:05.644Z,1528909985.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:06.023Z,1528909986.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:06.057Z,1528909986.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:06.416Z,1528909986.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:06.449Z,1528909986.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:06.823Z,1528909986.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:06.857Z,1528909986.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:07.235Z,1528909987.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:07.254Z,1528909987.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:07.640Z,1528909987.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:07.658Z,1528909987.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:08.034Z,1528909988.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:08.065Z,1528909988.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:08.420Z,1528909988.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:08.451Z,1528909988.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:08.819Z,1528909988.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:08.853Z,1528909988.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:09.219Z,1528909989.219 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:09.247Z,1528909989.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:09.620Z,1528909989.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:09.649Z,1528909989.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:10.019Z,1528909990.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:10.056Z,1528909990.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:10.441Z,1528909990.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:10.459Z,1528909990.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:10.839Z,1528909990.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:10.858Z,1528909990.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:11.239Z,1528909991.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:11.270Z,1528909991.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:11.619Z,1528909991.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:11.658Z,1528909991.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:12.019Z,1528909992.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:12.057Z,1528909992.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:12.416Z,1528909992.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:12.447Z,1528909992.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:12.819Z,1528909992.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:12.856Z,1528909992.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:13.229Z,1528909993.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:13.259Z,1528909993.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:13.633Z,1528909993.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:13.662Z,1528909993.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:14.033Z,1528909994.033 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:14.062Z,1528909994.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:14.419Z,1528909994.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:14.454Z,1528909994.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:14.820Z,1528909994.820 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:14.838Z,1528909994.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:15.225Z,1528909995.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:15.242Z,1528909995.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:15.623Z,1528909995.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:15.640Z,1528909995.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:16.022Z,1528909996.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:16.041Z,1528909996.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:16.434Z,1528909996.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:16.468Z,1528909996.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:16.834Z,1528909996.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:16.852Z,1528909996.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:17.234Z,1528909997.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:17.252Z,1528909997.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:17.624Z,1528909997.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:17.642Z,1528909997.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:18.022Z,1528909998.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:18.040Z,1528909998.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:18.422Z,1528909998.422 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:18.440Z,1528909998.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:18.824Z,1528909998.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:18.841Z,1528909998.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:19.225Z,1528909999.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:19.248Z,1528909999.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:19.629Z,1528909999.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:19.647Z,1528909999.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:20.030Z,1528910000.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:20.047Z,1528910000.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:20.423Z,1528910000.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:20.441Z,1528910000.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:20.822Z,1528910000.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:20.840Z,1528910000.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:21.224Z,1528910001.224 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:21.242Z,1528910001.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:21.624Z,1528910001.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:21.641Z,1528910001.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:22.022Z,1528910002.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:22.048Z,1528910002.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:22.434Z,1528910002.434 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:22.451Z,1528910002.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:22.833Z,1528910002.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:22.851Z,1528910002.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:23.233Z,1528910003.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:23.251Z,1528910003.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:23.624Z,1528910003.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:23.642Z,1528910003.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:24.023Z,1528910004.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:24.042Z,1528910004.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:24.425Z,1528910004.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:24.443Z,1528910004.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:24.825Z,1528910004.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:24.843Z,1528910004.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:25.229Z,1528910005.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:25.247Z,1528910005.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:25.629Z,1528910005.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:25.647Z,1528910005.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:26.029Z,1528910006.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:26.047Z,1528910006.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:26.423Z,1528910006.423 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:26.441Z,1528910006.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:26.822Z,1528910006.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:26.840Z,1528910006.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:27.223Z,1528910007.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:27.254Z,1528910007.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:27.621Z,1528910007.621 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:27.644Z,1528910007.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:28.021Z,1528910008.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:28.039Z,1528910008.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:28.430Z,1528910008.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:28.452Z,1528910008.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:28.833Z,1528910008.833 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:28.851Z,1528910008.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:29.233Z,1528910009.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:29.251Z,1528910009.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:29.623Z,1528910009.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:29.657Z,1528910009.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:30.024Z,1528910010.024 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:30.042Z,1528910010.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:30.426Z,1528910010.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:30.444Z,1528910010.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:30.829Z,1528910010.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:30.847Z,1528910010.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:31.234Z,1528910011.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:31.252Z,1528910011.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:34.345Z,1528910014.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:34.363Z,1528910014.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:34.513Z,1528910014.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:34.560Z,1528910014.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:34.897Z,1528910014.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:34.931Z,1528910014.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:35.304Z,1528910015.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:35.322Z,1528910015.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:35.699Z,1528910015.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:35.730Z,1528910015.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:36.106Z,1528910016.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:36.123Z,1528910016.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:36.509Z,1528910016.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:36.527Z,1528910016.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:36.907Z,1528910016.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:36.924Z,1528910016.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:37.301Z,1528910017.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:37.319Z,1528910017.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:37.702Z,1528910017.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:37.720Z,1528910017.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:38.106Z,1528910018.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:38.128Z,1528910018.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:38.509Z,1528910018.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:38.526Z,1528910018.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:38.909Z,1528910018.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:38.928Z,1528910018.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:39.301Z,1528910019.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:39.319Z,1528910019.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:39.699Z,1528910019.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:39.728Z,1528910019.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:40.107Z,1528910020.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:40.125Z,1528910020.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:40.509Z,1528910020.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:40.527Z,1528910020.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:40.906Z,1528910020.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:40.923Z,1528910020.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:41.302Z,1528910021.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:41.320Z,1528910021.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:41.705Z,1528910021.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:41.751Z,1528910021.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:42.107Z,1528910022.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:42.125Z,1528910022.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:42.511Z,1528910022.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:42.529Z,1528910022.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:42.910Z,1528910022.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:42.928Z,1528910022.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:43.301Z,1528910023.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:43.319Z,1528910023.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:43.695Z,1528910023.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:43.721Z,1528910023.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:44.110Z,1528910024.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:44.128Z,1528910024.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:44.128Z,1528910024.128 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 275
2018-06-13T17:13:44.128Z,1528910024.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:13:44.130Z,1528910024.130 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:44.130Z,1528910024.130 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 275
2018-06-13T17:13:44.130Z,1528910024.130 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:13:44.132Z,1528910024.132 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:44.132Z,1528910024.132 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 275
2018-06-13T17:13:44.132Z,1528910024.132 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:13:44.222Z,1528910024.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:13:44.222Z,1528910024.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:13:44.222Z,1528910024.222 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:13:44.515Z,1528910024.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:44.633Z,1528910024.633 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:13:44.633Z,1528910024.633 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 275
2018-06-13T17:13:44.633Z,1528910024.633 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:13:44.634Z,1528910024.634 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 275
2018-06-13T17:13:44.634Z,1528910024.634 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:13:44.634Z,1528910024.634 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 275
2018-06-13T17:13:44.916Z,1528910024.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:44.939Z,1528910024.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:13:44.939Z,1528910024.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:13:44.940Z,1528910024.940 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:13:44.940Z,1528910024.940 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:13:44.940Z,1528910024.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:13:44.941Z,1528910024.941 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:13:44.941Z,1528910024.941 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:13:44.942Z,1528910024.942 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:13:44.942Z,1528910024.942 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:13:45.295Z,1528910025.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:45.331Z,1528910025.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:13:45.332Z,1528910025.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:45.695Z,1528910025.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:45.727Z,1528910025.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:13:45.728Z,1528910025.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:46.117Z,1528910026.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:46.134Z,1528910026.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:13:46.135Z,1528910026.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:46.516Z,1528910026.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:46.533Z,1528910026.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:13:46.534Z,1528910026.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:46.911Z,1528910026.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:46.928Z,1528910026.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:13:46.929Z,1528910026.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:47.296Z,1528910027.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:47.327Z,1528910027.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:13:47.328Z,1528910027.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:47.695Z,1528910027.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:47.728Z,1528910027.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:13:47.729Z,1528910027.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:48.110Z,1528910028.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:48.133Z,1528910028.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:13:48.134Z,1528910028.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:48.518Z,1528910028.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:48.535Z,1528910028.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:13:48.536Z,1528910028.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:48.906Z,1528910028.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:48.938Z,1528910028.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:13:48.939Z,1528910028.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:49.296Z,1528910029.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:49.326Z,1528910029.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:13:49.327Z,1528910029.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:49.695Z,1528910029.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:49.729Z,1528910029.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:13:49.730Z,1528910029.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:50.106Z,1528910030.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:50.139Z,1528910030.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:13:50.140Z,1528910030.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:50.510Z,1528910030.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:50.538Z,1528910030.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:13:50.539Z,1528910030.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:50.910Z,1528910030.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:50.938Z,1528910030.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:13:50.939Z,1528910030.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:51.296Z,1528910031.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:51.313Z,1528910031.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:13:51.314Z,1528910031.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:51.700Z,1528910031.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:51.718Z,1528910031.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:13:51.718Z,1528910031.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:52.099Z,1528910032.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:52.116Z,1528910032.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:13:52.117Z,1528910032.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:52.510Z,1528910032.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:52.543Z,1528910032.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:13:52.544Z,1528910032.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:52.910Z,1528910032.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:52.927Z,1528910032.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:13:52.928Z,1528910032.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:53.314Z,1528910033.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:53.352Z,1528910033.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:13:53.357Z,1528910033.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:53.702Z,1528910033.702 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:53.720Z,1528910033.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:13:53.721Z,1528910033.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:54.099Z,1528910034.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:54.131Z,1528910034.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:13:54.132Z,1528910034.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:54.499Z,1528910034.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:54.523Z,1528910034.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:13:54.524Z,1528910034.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:54.901Z,1528910034.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:54.919Z,1528910034.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:13:54.920Z,1528910034.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:55.307Z,1528910035.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:55.328Z,1528910035.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:13:55.329Z,1528910035.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:55.710Z,1528910035.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:55.735Z,1528910035.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:13:55.736Z,1528910035.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:56.111Z,1528910036.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:56.128Z,1528910036.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:13:56.129Z,1528910036.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:56.499Z,1528910036.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:56.524Z,1528910036.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:13:56.525Z,1528910036.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:56.902Z,1528910036.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:56.920Z,1528910036.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:13:56.921Z,1528910036.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:57.299Z,1528910037.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:57.323Z,1528910037.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:13:57.324Z,1528910037.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:57.699Z,1528910037.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:57.725Z,1528910037.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:13:57.726Z,1528910037.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:58.103Z,1528910038.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:58.120Z,1528910038.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:13:58.121Z,1528910038.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:58.510Z,1528910038.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:58.536Z,1528910038.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:13:58.553Z,1528910038.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:58.916Z,1528910038.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:58.934Z,1528910038.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:13:58.935Z,1528910038.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:59.315Z,1528910039.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:59.333Z,1528910039.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:13:59.334Z,1528910039.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:13:59.705Z,1528910039.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:13:59.730Z,1528910039.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:13:59.731Z,1528910039.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:00.097Z,1528910040.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:00.125Z,1528910040.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:14:00.126Z,1528910040.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:00.504Z,1528910040.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:00.521Z,1528910040.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:14:00.522Z,1528910040.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:00.903Z,1528910040.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:00.920Z,1528910040.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:14:00.921Z,1528910040.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:01.314Z,1528910041.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:01.331Z,1528910041.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:14:01.332Z,1528910041.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:01.713Z,1528910041.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:01.730Z,1528910041.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:14:01.731Z,1528910041.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:02.112Z,1528910042.112 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:02.130Z,1528910042.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:14:02.131Z,1528910042.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:02.500Z,1528910042.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:02.519Z,1528910042.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:14:02.520Z,1528910042.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:02.891Z,1528910042.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:02.932Z,1528910042.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:14:02.937Z,1528910042.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:03.295Z,1528910043.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:03.331Z,1528910043.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:14:03.332Z,1528910043.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:03.696Z,1528910043.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:03.726Z,1528910043.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:14:03.727Z,1528910043.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:04.095Z,1528910044.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:04.129Z,1528910044.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:04.501Z,1528910044.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:04.536Z,1528910044.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:04.916Z,1528910044.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:04.935Z,1528910044.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:05.316Z,1528910045.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:05.334Z,1528910045.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:05.699Z,1528910045.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:05.740Z,1528910045.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:06.095Z,1528910046.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:06.132Z,1528910046.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:06.497Z,1528910046.497 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:06.525Z,1528910046.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:06.895Z,1528910046.895 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:06.931Z,1528910046.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:07.310Z,1528910047.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:07.334Z,1528910047.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:07.716Z,1528910047.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:07.734Z,1528910047.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:08.110Z,1528910048.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:08.133Z,1528910048.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:08.495Z,1528910048.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:08.535Z,1528910048.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:08.891Z,1528910048.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:08.917Z,1528910048.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:09.295Z,1528910049.295 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:09.329Z,1528910049.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:09.695Z,1528910049.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:09.731Z,1528910049.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:10.095Z,1528910050.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:10.113Z,1528910050.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:10.510Z,1528910050.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:10.543Z,1528910050.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:10.914Z,1528910050.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:10.942Z,1528910050.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:11.309Z,1528910051.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:11.344Z,1528910051.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:11.699Z,1528910051.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:11.744Z,1528910051.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:12.098Z,1528910052.098 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:12.116Z,1528910052.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:12.495Z,1528910052.495 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:12.513Z,1528910052.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:12.898Z,1528910052.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:12.916Z,1528910052.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:13.310Z,1528910053.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:13.344Z,1528910053.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:13.705Z,1528910053.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:13.723Z,1528910053.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:14.102Z,1528910054.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:14.119Z,1528910054.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:14.499Z,1528910054.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:14.517Z,1528910054.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:14.896Z,1528910054.896 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:14.920Z,1528910054.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:15.297Z,1528910055.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:15.315Z,1528910055.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:15.694Z,1528910055.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:15.716Z,1528910055.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:16.097Z,1528910056.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:16.120Z,1528910056.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:16.507Z,1528910056.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:16.526Z,1528910056.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:16.909Z,1528910056.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:16.927Z,1528910056.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:17.309Z,1528910057.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:17.350Z,1528910057.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:17.699Z,1528910057.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:17.724Z,1528910057.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:18.100Z,1528910058.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:18.118Z,1528910058.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:18.501Z,1528910058.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:18.519Z,1528910058.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:18.900Z,1528910058.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:18.918Z,1528910058.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:19.302Z,1528910059.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:19.321Z,1528910059.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:19.705Z,1528910059.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:19.723Z,1528910059.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:20.110Z,1528910060.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:20.127Z,1528910060.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:20.499Z,1528910060.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:20.518Z,1528910060.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:20.897Z,1528910060.897 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:20.915Z,1528910060.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:21.298Z,1528910061.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:21.319Z,1528910061.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:21.700Z,1528910061.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:21.718Z,1528910061.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:22.101Z,1528910062.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:22.119Z,1528910062.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:22.510Z,1528910062.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:22.527Z,1528910062.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:22.910Z,1528910062.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:22.927Z,1528910062.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:23.306Z,1528910063.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:23.324Z,1528910063.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:23.700Z,1528910063.700 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:23.718Z,1528910063.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:24.094Z,1528910064.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:24.137Z,1528910064.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:24.498Z,1528910064.498 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:24.520Z,1528910064.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:24.900Z,1528910064.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:24.918Z,1528910064.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:25.306Z,1528910065.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:25.324Z,1528910065.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:25.705Z,1528910065.705 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:25.723Z,1528910065.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:26.107Z,1528910066.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:26.124Z,1528910066.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:26.500Z,1528910066.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:26.519Z,1528910066.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:26.898Z,1528910066.898 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:26.916Z,1528910066.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:27.294Z,1528910067.294 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:27.320Z,1528910067.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:27.699Z,1528910067.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:27.726Z,1528910067.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:28.091Z,1528910068.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:28.132Z,1528910068.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:28.511Z,1528910068.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:28.529Z,1528910068.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:28.916Z,1528910068.916 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:28.934Z,1528910068.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:29.316Z,1528910069.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:29.334Z,1528910069.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:29.695Z,1528910069.695 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:29.722Z,1528910069.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:30.095Z,1528910070.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:30.123Z,1528910070.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:30.491Z,1528910070.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:30.530Z,1528910070.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:30.900Z,1528910070.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:30.932Z,1528910070.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:31.310Z,1528910071.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:31.334Z,1528910071.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:34.426Z,1528910074.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:34.445Z,1528910074.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:34.589Z,1528910074.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:34.622Z,1528910074.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:34.974Z,1528910074.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:34.992Z,1528910074.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:35.374Z,1528910075.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:35.392Z,1528910075.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:35.772Z,1528910075.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:35.789Z,1528910075.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:36.177Z,1528910076.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:36.196Z,1528910076.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:36.577Z,1528910076.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:36.595Z,1528910076.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:36.986Z,1528910076.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:37.004Z,1528910077.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:37.371Z,1528910077.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:37.406Z,1528910077.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:37.763Z,1528910077.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:37.801Z,1528910077.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:38.171Z,1528910078.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:38.194Z,1528910078.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:38.583Z,1528910078.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:38.602Z,1528910078.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:38.984Z,1528910078.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:39.003Z,1528910079.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:39.383Z,1528910079.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:39.402Z,1528910079.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:39.776Z,1528910079.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:39.794Z,1528910079.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:40.163Z,1528910080.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:40.203Z,1528910080.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:40.568Z,1528910080.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:40.598Z,1528910080.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:40.967Z,1528910080.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:40.000Z,1528910081.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:41.385Z,1528910081.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:41.404Z,1528910081.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:41.786Z,1528910081.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:41.817Z,1528910081.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:42.184Z,1528910082.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:42.203Z,1528910082.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:42.563Z,1528910082.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:42.593Z,1528910082.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:42.967Z,1528910082.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:43.001Z,1528910083.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:43.367Z,1528910083.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:43.406Z,1528910083.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:43.768Z,1528910083.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:43.800Z,1528910083.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:44.167Z,1528910084.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:44.201Z,1528910084.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:44.584Z,1528910084.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:44.603Z,1528910084.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:44.977Z,1528910084.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:45.017Z,1528910085.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:45.384Z,1528910085.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:45.403Z,1528910085.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:45.772Z,1528910085.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:45.801Z,1528910085.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:46.168Z,1528910086.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:46.209Z,1528910086.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:46.568Z,1528910086.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:46.598Z,1528910086.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:46.967Z,1528910086.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:47.005Z,1528910087.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:47.389Z,1528910087.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:47.408Z,1528910087.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:47.789Z,1528910087.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:47.807Z,1528910087.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:48.182Z,1528910088.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:48.208Z,1528910088.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:48.567Z,1528910088.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:48.602Z,1528910088.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:48.967Z,1528910088.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:48.998Z,1528910088.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:49.367Z,1528910089.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:49.409Z,1528910089.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:49.768Z,1528910089.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:49.786Z,1528910089.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:50.171Z,1528910090.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:50.217Z,1528910090.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:50.581Z,1528910090.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:50.616Z,1528910090.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:50.981Z,1528910090.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:51.000Z,1528910091.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:51.381Z,1528910091.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:51.400Z,1528910091.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:51.772Z,1528910091.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:51.790Z,1528910091.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:52.170Z,1528910092.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:52.187Z,1528910092.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:52.567Z,1528910092.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:52.599Z,1528910092.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:52.967Z,1528910092.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:52.985Z,1528910092.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:53.385Z,1528910093.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:53.414Z,1528910093.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:53.785Z,1528910093.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:53.813Z,1528910093.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:54.181Z,1528910094.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:54.218Z,1528910094.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:54.567Z,1528910094.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:54.585Z,1528910094.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:54.971Z,1528910094.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:54.989Z,1528910094.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:55.371Z,1528910095.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:55.389Z,1528910095.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:55.770Z,1528910095.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:55.788Z,1528910095.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:56.170Z,1528910096.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:56.192Z,1528910096.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:56.581Z,1528910096.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:56.624Z,1528910096.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:56.981Z,1528910096.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:57.019Z,1528910097.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:57.382Z,1528910097.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:57.421Z,1528910097.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:57.772Z,1528910097.772 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:57.790Z,1528910097.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:58.170Z,1528910098.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:58.188Z,1528910098.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:58.571Z,1528910098.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:58.604Z,1528910098.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:58.973Z,1528910098.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:58.991Z,1528910098.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:59.379Z,1528910099.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:59.399Z,1528910099.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:14:59.781Z,1528910099.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:14:59.800Z,1528910099.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:00.178Z,1528910100.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:00.205Z,1528910100.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:00.570Z,1528910100.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:00.588Z,1528910100.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:00.971Z,1528910100.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:00.993Z,1528910100.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:01.372Z,1528910101.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:01.390Z,1528910101.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:01.770Z,1528910101.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:01.788Z,1528910101.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:02.174Z,1528910102.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:02.191Z,1528910102.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:02.578Z,1528910102.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:02.601Z,1528910102.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:02.979Z,1528910102.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:02.997Z,1528910102.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:03.378Z,1528910103.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:03.401Z,1528910103.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:03.773Z,1528910103.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:03.791Z,1528910103.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:04.170Z,1528910104.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:04.188Z,1528910104.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:04.573Z,1528910104.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:04.591Z,1528910104.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:04.976Z,1528910104.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:04.994Z,1528910104.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:05.381Z,1528910105.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:05.400Z,1528910105.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:05.782Z,1528910105.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:05.804Z,1528910105.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:06.183Z,1528910106.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:06.202Z,1528910106.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:06.563Z,1528910106.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:06.591Z,1528910106.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:06.968Z,1528910106.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:07.001Z,1528910107.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:07.367Z,1528910107.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:07.405Z,1528910107.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:07.763Z,1528910107.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:07.794Z,1528910107.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:08.167Z,1528910108.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:08.201Z,1528910108.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:08.583Z,1528910108.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:08.605Z,1528910108.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:08.984Z,1528910108.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:09.005Z,1528910109.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:09.383Z,1528910109.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:09.402Z,1528910109.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:09.768Z,1528910109.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:09.806Z,1528910109.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:10.163Z,1528910110.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:10.193Z,1528910110.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:10.567Z,1528910110.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:10.602Z,1528910110.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:10.967Z,1528910110.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:10.984Z,1528910110.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:11.377Z,1528910111.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:11.408Z,1528910111.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:11.782Z,1528910111.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:11.815Z,1528910111.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:12.181Z,1528910112.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:12.216Z,1528910112.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:12.570Z,1528910112.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:12.588Z,1528910112.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:12.970Z,1528910112.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:12.988Z,1528910112.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:13.370Z,1528910113.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:13.388Z,1528910113.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:13.767Z,1528910113.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:13.784Z,1528910113.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:14.170Z,1528910114.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:14.188Z,1528910114.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:14.585Z,1528910114.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:14.613Z,1528910114.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:14.981Z,1528910114.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:15.016Z,1528910115.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:15.381Z,1528910115.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:15.415Z,1528910115.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:15.770Z,1528910115.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:15.788Z,1528910115.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:16.166Z,1528910116.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:16.184Z,1528910116.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:16.571Z,1528910116.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:16.589Z,1528910116.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:16.970Z,1528910116.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:16.988Z,1528910116.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:17.377Z,1528910117.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:17.395Z,1528910117.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:17.781Z,1528910117.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:17.799Z,1528910117.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:18.185Z,1528910118.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:18.204Z,1528910118.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:18.574Z,1528910118.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:18.593Z,1528910118.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:18.966Z,1528910118.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:18.992Z,1528910118.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:19.371Z,1528910119.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:19.396Z,1528910119.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:19.764Z,1528910119.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:19.794Z,1528910119.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:20.171Z,1528910120.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:20.196Z,1528910120.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:20.584Z,1528910120.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:20.604Z,1528910120.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:20.985Z,1528910120.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:21.003Z,1528910121.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:21.388Z,1528910121.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:21.412Z,1528910121.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:21.771Z,1528910121.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:21.796Z,1528910121.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:22.163Z,1528910122.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:22.202Z,1528910122.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:22.571Z,1528910122.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:22.601Z,1528910122.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:22.968Z,1528910122.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:23.001Z,1528910123.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:23.389Z,1528910123.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:23.408Z,1528910123.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:23.787Z,1528910123.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:23.806Z,1528910123.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:24.182Z,1528910124.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:24.208Z,1528910124.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:24.563Z,1528910124.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:24.590Z,1528910124.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:24.967Z,1528910124.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:24.998Z,1528910124.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:25.367Z,1528910125.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:25.410Z,1528910125.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:25.763Z,1528910125.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:25.782Z,1528910125.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:26.171Z,1528910126.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:26.189Z,1528910126.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:26.581Z,1528910126.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:26.608Z,1528910126.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:26.977Z,1528910126.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:26.996Z,1528910126.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:27.381Z,1528910127.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:27.417Z,1528910127.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:27.771Z,1528910127.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:27.789Z,1528910127.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:28.171Z,1528910128.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:28.189Z,1528910128.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:28.572Z,1528910128.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:28.590Z,1528910128.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:28.972Z,1528910128.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:28.989Z,1528910128.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:29.377Z,1528910129.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:29.395Z,1528910129.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:29.781Z,1528910129.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:29.799Z,1528910129.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:30.178Z,1528910130.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:30.195Z,1528910130.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:30.570Z,1528910130.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:30.588Z,1528910130.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:30.974Z,1528910130.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:30.992Z,1528910130.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:31.375Z,1528910131.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:31.393Z,1528910131.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:31.774Z,1528910131.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:31.792Z,1528910131.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:32.175Z,1528910132.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:32.194Z,1528910132.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:32.578Z,1528910132.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:32.595Z,1528910132.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:32.981Z,1528910132.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:32.999Z,1528910132.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:33.382Z,1528910133.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:33.400Z,1528910133.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:33.775Z,1528910133.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:33.793Z,1528910133.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:34.174Z,1528910134.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:34.192Z,1528910134.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:34.574Z,1528910134.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:34.592Z,1528910134.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:34.974Z,1528910134.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:34.996Z,1528910134.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:38.226Z,1528910138.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:38.252Z,1528910138.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:38.401Z,1528910138.401 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:38.432Z,1528910138.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:38.797Z,1528910138.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:38.821Z,1528910138.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:39.191Z,1528910139.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:39.228Z,1528910139.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:39.584Z,1528910139.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:39.602Z,1528910139.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:39.984Z,1528910139.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:40.002Z,1528910140.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:40.390Z,1528910140.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:40.424Z,1528910140.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:40.797Z,1528910140.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:40.831Z,1528910140.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:41.198Z,1528910141.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:41.234Z,1528910141.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:41.586Z,1528910141.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:41.604Z,1528910141.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:41.986Z,1528910141.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:42.012Z,1528910142.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:42.387Z,1528910142.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:42.405Z,1528910142.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:42.788Z,1528910142.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:42.806Z,1528910142.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:43.187Z,1528910143.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:43.216Z,1528910143.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:43.594Z,1528910143.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:43.626Z,1528910143.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:43.995Z,1528910143.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:44.014Z,1528910144.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:44.395Z,1528910144.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:44.412Z,1528910144.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:44.789Z,1528910144.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:44.808Z,1528910144.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:45.185Z,1528910145.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:45.204Z,1528910145.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:45.589Z,1528910145.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:45.612Z,1528910145.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:45.989Z,1528910145.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:46.007Z,1528910146.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:46.397Z,1528910146.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:46.416Z,1528910146.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:46.798Z,1528910146.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:46.839Z,1528910146.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:47.195Z,1528910147.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:47.214Z,1528910147.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:47.589Z,1528910147.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:47.607Z,1528910147.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:47.979Z,1528910147.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:48.010Z,1528910148.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:48.389Z,1528910148.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:48.407Z,1528910148.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:48.778Z,1528910148.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:48.816Z,1528910148.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:49.183Z,1528910149.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:49.211Z,1528910149.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:49.601Z,1528910149.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:49.619Z,1528910149.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:50.003Z,1528910150.003 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:50.021Z,1528910150.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:50.400Z,1528910150.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:50.418Z,1528910150.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:50.782Z,1528910150.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:50.809Z,1528910150.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:51.175Z,1528910151.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:51.216Z,1528910151.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:51.580Z,1528910151.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:51.624Z,1528910151.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:51.981Z,1528910151.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:52.009Z,1528910152.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:52.397Z,1528910152.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:52.415Z,1528910152.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:52.799Z,1528910152.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:52.828Z,1528910152.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:53.197Z,1528910153.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:53.220Z,1528910153.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:53.577Z,1528910153.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:53.614Z,1528910153.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:53.982Z,1528910153.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:54.015Z,1528910154.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:54.379Z,1528910154.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:54.417Z,1528910154.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:54.775Z,1528910154.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:54.813Z,1528910154.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:55.181Z,1528910155.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:55.220Z,1528910155.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:55.587Z,1528910155.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:55.622Z,1528910155.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:55.993Z,1528910155.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:56.025Z,1528910156.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:56.396Z,1528910156.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:56.425Z,1528910156.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:56.783Z,1528910156.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:56.803Z,1528910156.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:57.187Z,1528910157.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:57.221Z,1528910157.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:57.582Z,1528910157.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:57.626Z,1528910157.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:57.982Z,1528910157.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:58.004Z,1528910158.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:58.396Z,1528910158.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:58.434Z,1528910158.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:58.797Z,1528910158.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:58.831Z,1528910158.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:59.189Z,1528910159.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:59.232Z,1528910159.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:59.584Z,1528910159.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:15:59.607Z,1528910159.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:15:59.986Z,1528910159.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:00.007Z,1528910160.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:00.386Z,1528910160.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:00.403Z,1528910160.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:00.785Z,1528910160.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:00.834Z,1528910160.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:01.183Z,1528910161.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:01.207Z,1528910161.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:01.590Z,1528910161.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:01.610Z,1528910161.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:01.995Z,1528910161.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:02.014Z,1528910162.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:02.393Z,1528910162.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:02.431Z,1528910162.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:02.784Z,1528910162.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:02.807Z,1528910162.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:03.184Z,1528910163.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:03.207Z,1528910163.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:03.586Z,1528910163.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:03.609Z,1528910163.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:03.983Z,1528910163.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:04.026Z,1528910164.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:04.393Z,1528910164.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:04.416Z,1528910164.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:04.795Z,1528910164.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:04.815Z,1528910164.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:05.192Z,1528910165.192 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:05.210Z,1528910165.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:05.585Z,1528910165.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:05.634Z,1528910165.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:05.984Z,1528910165.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:06.002Z,1528910166.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:06.383Z,1528910166.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:06.406Z,1528910166.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:06.788Z,1528910166.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:06.808Z,1528910166.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:07.184Z,1528910167.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:07.236Z,1528910167.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:07.589Z,1528910167.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:07.611Z,1528910167.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:07.993Z,1528910167.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:08.016Z,1528910168.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:08.392Z,1528910168.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:08.416Z,1528910168.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:08.784Z,1528910168.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:08.838Z,1528910168.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:09.186Z,1528910169.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:09.204Z,1528910169.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:09.582Z,1528910169.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:09.625Z,1528910169.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:09.983Z,1528910169.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:10.018Z,1528910170.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:10.395Z,1528910170.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:10.443Z,1528910170.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:10.794Z,1528910170.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:10.822Z,1528910170.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:11.194Z,1528910171.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:11.217Z,1528910171.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:11.587Z,1528910171.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:11.610Z,1528910171.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:11.983Z,1528910171.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:12.006Z,1528910172.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:12.383Z,1528910172.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:12.406Z,1528910172.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:12.786Z,1528910172.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:12.813Z,1528910172.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:13.183Z,1528910173.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:13.210Z,1528910173.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:13.594Z,1528910173.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:13.613Z,1528910173.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:13.995Z,1528910173.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:14.013Z,1528910174.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:14.395Z,1528910174.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:14.418Z,1528910174.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:14.783Z,1528910174.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:14.812Z,1528910174.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:15.187Z,1528910175.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:15.204Z,1528910175.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:15.583Z,1528910175.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:15.608Z,1528910175.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:15.983Z,1528910175.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:16.007Z,1528910176.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:16.398Z,1528910176.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:16.420Z,1528910176.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:16.794Z,1528910176.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:16.844Z,1528910176.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:17.195Z,1528910177.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:17.213Z,1528910177.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:17.591Z,1528910177.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:17.633Z,1528910177.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:17.983Z,1528910177.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:18.012Z,1528910178.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:18.397Z,1528910178.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:18.415Z,1528910178.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:18.795Z,1528910178.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:18.813Z,1528910178.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:19.196Z,1528910179.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:19.241Z,1528910179.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:19.583Z,1528910179.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:19.631Z,1528910179.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:19.986Z,1528910179.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:20.004Z,1528910180.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:20.395Z,1528910180.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:20.426Z,1528910180.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:20.800Z,1528910180.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:20.824Z,1528910180.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:21.206Z,1528910181.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:21.228Z,1528910181.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:21.580Z,1528910181.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:21.627Z,1528910181.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:21.979Z,1528910181.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:22.023Z,1528910182.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:22.397Z,1528910182.397 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:22.416Z,1528910182.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:22.799Z,1528910182.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:22.822Z,1528910182.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:23.197Z,1528910183.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:23.221Z,1528910183.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:23.580Z,1528910183.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:23.609Z,1528910183.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:23.979Z,1528910183.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:24.013Z,1528910184.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:24.394Z,1528910184.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:24.426Z,1528910184.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:24.797Z,1528910184.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:24.819Z,1528910184.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:25.194Z,1528910185.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:25.224Z,1528910185.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:25.580Z,1528910185.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:25.610Z,1528910185.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:25.979Z,1528910185.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:25.997Z,1528910185.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:26.393Z,1528910186.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:26.429Z,1528910186.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:26.797Z,1528910186.797 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:26.827Z,1528910186.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:27.193Z,1528910187.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:27.236Z,1528910187.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:27.582Z,1528910187.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:27.600Z,1528910187.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:27.986Z,1528910187.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:28.004Z,1528910188.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:28.393Z,1528910188.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:28.411Z,1528910188.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:28.793Z,1528910188.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:28.811Z,1528910188.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:29.190Z,1528910189.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:29.253Z,1528910189.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:29.586Z,1528910189.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:29.604Z,1528910189.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:29.986Z,1528910189.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:30.003Z,1528910190.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:30.394Z,1528910190.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:30.412Z,1528910190.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:30.795Z,1528910190.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:30.812Z,1528910190.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:31.194Z,1528910191.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:31.216Z,1528910191.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:31.590Z,1528910191.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:31.608Z,1528910191.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:34.699Z,1528910194.699 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:34.717Z,1528910194.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:34.853Z,1528910194.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:34.872Z,1528910194.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:35.249Z,1528910195.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:35.268Z,1528910195.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:35.652Z,1528910195.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:35.670Z,1528910195.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:36.028Z,1528910196.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:36.074Z,1528910196.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:36.427Z,1528910196.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:36.471Z,1528910196.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:36.828Z,1528910196.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:36.860Z,1528910196.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:37.227Z,1528910197.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:37.268Z,1528910197.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:37.644Z,1528910197.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:37.680Z,1528910197.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:38.048Z,1528910198.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:38.070Z,1528910198.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:38.444Z,1528910198.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:38.466Z,1528910198.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:38.827Z,1528910198.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:38.860Z,1528910198.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:39.227Z,1528910199.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:39.276Z,1528910199.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:39.628Z,1528910199.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:39.666Z,1528910199.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:40.027Z,1528910200.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:40.068Z,1528910200.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:40.447Z,1528910200.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:40.466Z,1528910200.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:40.847Z,1528910200.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:40.897Z,1528910200.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:41.250Z,1528910201.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:41.273Z,1528910201.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:41.623Z,1528910201.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:41.662Z,1528910201.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:42.027Z,1528910202.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:42.061Z,1528910202.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:42.427Z,1528910202.427 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:42.476Z,1528910202.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:42.824Z,1528910202.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:42.862Z,1528910202.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:43.227Z,1528910203.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:43.259Z,1528910203.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:43.645Z,1528910203.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:43.666Z,1528910203.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:44.044Z,1528910204.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:44.098Z,1528910204.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:44.444Z,1528910204.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:44.473Z,1528910204.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:44.827Z,1528910204.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:44.860Z,1528910204.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:45.227Z,1528910205.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:45.260Z,1528910205.260 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:45.260Z,1528910205.260 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 276
2018-06-13T17:16:45.260Z,1528910205.260 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:16:45.262Z,1528910205.262 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:45.262Z,1528910205.262 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 276
2018-06-13T17:16:45.262Z,1528910205.262 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:16:45.264Z,1528910205.264 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:45.264Z,1528910205.264 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 276
2018-06-13T17:16:45.264Z,1528910205.264 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:16:45.337Z,1528910205.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:16:45.337Z,1528910205.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:16:45.338Z,1528910205.338 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:16:45.627Z,1528910205.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:45.741Z,1528910205.741 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:16:45.741Z,1528910205.741 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 276
2018-06-13T17:16:45.742Z,1528910205.742 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:16:45.742Z,1528910205.742 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 276
2018-06-13T17:16:45.742Z,1528910205.742 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:16:45.742Z,1528910205.742 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 276
2018-06-13T17:16:46.027Z,1528910206.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:46.044Z,1528910206.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:16:46.044Z,1528910206.044 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:16:46.061Z,1528910206.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:16:46.061Z,1528910206.061 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:16:46.062Z,1528910206.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:16:46.062Z,1528910206.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:16:46.062Z,1528910206.062 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:16:46.063Z,1528910206.063 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:16:46.063Z,1528910206.063 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:16:46.445Z,1528910206.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:46.478Z,1528910206.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:16:46.479Z,1528910206.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:46.847Z,1528910206.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:46.878Z,1528910206.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:16:46.879Z,1528910206.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:47.242Z,1528910207.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:47.272Z,1528910207.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:16:47.273Z,1528910207.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:47.625Z,1528910207.625 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:47.643Z,1528910207.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:16:47.643Z,1528910207.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:48.030Z,1528910208.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:48.047Z,1528910208.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:16:48.048Z,1528910208.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:48.430Z,1528910208.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:48.450Z,1528910208.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:16:48.451Z,1528910208.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:48.829Z,1528910208.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:48.847Z,1528910208.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:16:48.848Z,1528910208.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:49.232Z,1528910209.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:49.249Z,1528910209.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:16:49.250Z,1528910209.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:49.639Z,1528910209.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:49.657Z,1528910209.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:16:49.658Z,1528910209.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:50.041Z,1528910210.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:50.064Z,1528910210.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:16:50.064Z,1528910210.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:50.438Z,1528910210.438 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:50.456Z,1528910210.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:16:50.457Z,1528910210.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:50.831Z,1528910210.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:50.860Z,1528910210.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:16:50.865Z,1528910210.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:51.223Z,1528910211.223 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:51.261Z,1528910211.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:16:51.262Z,1528910211.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:51.627Z,1528910211.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:51.658Z,1528910211.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:16:51.660Z,1528910211.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:52.027Z,1528910212.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:52.054Z,1528910212.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:16:52.055Z,1528910212.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:52.448Z,1528910212.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:52.466Z,1528910212.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:16:52.467Z,1528910212.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:52.847Z,1528910212.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:52.866Z,1528910212.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:16:52.868Z,1528910212.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:53.250Z,1528910213.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:53.272Z,1528910213.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:16:53.273Z,1528910213.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:53.623Z,1528910213.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:53.657Z,1528910213.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:16:53.658Z,1528910213.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:54.027Z,1528910214.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:54.054Z,1528910214.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:16:54.055Z,1528910214.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:54.428Z,1528910214.428 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:54.463Z,1528910214.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:16:54.464Z,1528910214.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:54.827Z,1528910214.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:54.855Z,1528910214.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:16:54.856Z,1528910214.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:55.227Z,1528910215.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:55.254Z,1528910215.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:16:55.255Z,1528910215.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:55.640Z,1528910215.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:55.658Z,1528910215.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:16:55.659Z,1528910215.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:56.043Z,1528910216.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:56.064Z,1528910216.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:16:56.065Z,1528910216.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:56.444Z,1528910216.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:56.464Z,1528910216.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:16:56.466Z,1528910216.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:56.827Z,1528910216.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:56.863Z,1528910216.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:16:56.864Z,1528910216.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:57.227Z,1528910217.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:57.257Z,1528910217.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:16:57.258Z,1528910217.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:57.627Z,1528910217.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:57.663Z,1528910217.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:16:57.664Z,1528910217.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:58.027Z,1528910218.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:58.066Z,1528910218.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:16:58.068Z,1528910218.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:58.445Z,1528910218.445 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:58.463Z,1528910218.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:16:58.464Z,1528910218.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:58.847Z,1528910218.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:58.864Z,1528910218.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:16:58.865Z,1528910218.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:59.244Z,1528910219.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:59.262Z,1528910219.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:16:59.263Z,1528910219.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:16:59.623Z,1528910219.623 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:16:59.641Z,1528910219.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:16:59.642Z,1528910219.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:00.027Z,1528910220.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:00.044Z,1528910220.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:17:00.045Z,1528910220.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:00.441Z,1528910220.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:00.480Z,1528910220.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:17:00.485Z,1528910220.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:00.841Z,1528910220.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:00.875Z,1528910220.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:17:00.876Z,1528910220.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:01.242Z,1528910221.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:01.260Z,1528910221.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:17:01.277Z,1528910221.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:01.632Z,1528910221.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:01.666Z,1528910221.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:17:01.667Z,1528910221.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:02.032Z,1528910222.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:02.050Z,1528910222.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:17:02.051Z,1528910222.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:02.439Z,1528910222.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:02.464Z,1528910222.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:17:02.481Z,1528910222.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:02.842Z,1528910222.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:02.864Z,1528910222.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:17:02.865Z,1528910222.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:03.244Z,1528910223.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:03.263Z,1528910223.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:17:03.264Z,1528910223.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:03.631Z,1528910223.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:03.669Z,1528910223.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:17:03.670Z,1528910223.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:04.034Z,1528910224.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:04.060Z,1528910224.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:17:04.061Z,1528910224.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:04.446Z,1528910224.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:04.463Z,1528910224.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:17:04.464Z,1528910224.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:04.847Z,1528910224.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:04.865Z,1528910224.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:17:04.866Z,1528910224.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:05.244Z,1528910225.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:05.262Z,1528910225.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:05.624Z,1528910225.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:05.666Z,1528910225.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:06.036Z,1528910226.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:06.054Z,1528910226.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:06.444Z,1528910226.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:06.463Z,1528910226.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:06.848Z,1528910226.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:06.867Z,1528910226.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:07.242Z,1528910227.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:07.275Z,1528910227.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:07.628Z,1528910227.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:07.657Z,1528910227.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:08.023Z,1528910228.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:08.064Z,1528910228.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:08.440Z,1528910228.440 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:08.466Z,1528910228.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:08.852Z,1528910228.852 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:08.870Z,1528910228.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:09.244Z,1528910229.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:09.263Z,1528910229.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:09.627Z,1528910229.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:09.660Z,1528910229.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:10.027Z,1528910230.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:10.064Z,1528910230.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:10.444Z,1528910230.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:10.463Z,1528910230.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:10.846Z,1528910230.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:10.878Z,1528910230.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:11.243Z,1528910231.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:11.261Z,1528910231.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:11.624Z,1528910231.624 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:11.662Z,1528910231.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:12.027Z,1528910232.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:12.065Z,1528910232.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:12.437Z,1528910232.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:12.472Z,1528910232.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:12.837Z,1528910232.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:12.866Z,1528910232.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:13.237Z,1528910233.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:13.273Z,1528910233.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:13.628Z,1528910233.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:13.659Z,1528910233.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:14.027Z,1528910234.027 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:14.061Z,1528910234.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:14.441Z,1528910234.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:14.468Z,1528910234.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:14.841Z,1528910234.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:14.870Z,1528910234.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:15.241Z,1528910235.241 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:15.269Z,1528910235.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:15.628Z,1528910235.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:15.646Z,1528910235.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:16.031Z,1528910236.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:16.072Z,1528910236.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:16.437Z,1528910236.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:16.455Z,1528910236.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:16.841Z,1528910236.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:16.882Z,1528910236.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:17.242Z,1528910237.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:17.260Z,1528910237.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:17.630Z,1528910237.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:17.649Z,1528910237.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:18.032Z,1528910238.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:18.050Z,1528910238.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:18.437Z,1528910238.437 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:18.456Z,1528910238.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:18.837Z,1528910238.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:18.855Z,1528910238.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:19.238Z,1528910239.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:19.260Z,1528910239.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:19.631Z,1528910239.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:19.664Z,1528910239.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:20.030Z,1528910240.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:20.047Z,1528910240.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:20.442Z,1528910240.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:20.459Z,1528910240.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:20.842Z,1528910240.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:20.859Z,1528910240.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:21.238Z,1528910241.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:21.256Z,1528910241.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:21.633Z,1528910241.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:21.651Z,1528910241.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:22.032Z,1528910242.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:22.050Z,1528910242.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:22.439Z,1528910242.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:22.457Z,1528910242.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:22.841Z,1528910242.841 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:22.864Z,1528910242.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:23.238Z,1528910243.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:23.264Z,1528910243.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:23.634Z,1528910243.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:23.652Z,1528910243.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:24.031Z,1528910244.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:24.054Z,1528910244.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:24.442Z,1528910244.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:24.461Z,1528910244.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:24.842Z,1528910244.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:24.860Z,1528910244.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:25.242Z,1528910245.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:25.268Z,1528910245.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:25.633Z,1528910245.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:25.651Z,1528910245.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:26.030Z,1528910246.030 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:26.048Z,1528910246.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:26.433Z,1528910246.433 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:26.451Z,1528910246.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:26.842Z,1528910246.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:26.864Z,1528910246.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:27.243Z,1528910247.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:27.261Z,1528910247.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:27.642Z,1528910247.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:27.664Z,1528910247.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:28.031Z,1528910248.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:28.056Z,1528910248.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:28.430Z,1528910248.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:28.448Z,1528910248.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:28.826Z,1528910248.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:28.860Z,1528910248.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:29.227Z,1528910249.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:29.264Z,1528910249.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:29.643Z,1528910249.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:29.666Z,1528910249.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:30.047Z,1528910250.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:30.065Z,1528910250.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:30.443Z,1528910250.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:30.461Z,1528910250.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:30.823Z,1528910250.823 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:30.860Z,1528910250.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:31.237Z,1528910251.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:31.255Z,1528910251.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:31.637Z,1528910251.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:31.655Z,1528910251.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:34.757Z,1528910254.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:34.775Z,1528910254.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:34.778Z,1528910254.778 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T17:12:34.3Z
2018-06-13T17:17:34.778Z,1528910254.778 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T17:17:34.779Z,1528910254.779 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T17:17:34.891Z,1528910254.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:34.954Z,1528910254.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:36.051Z,1528910256.051 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:36.070Z,1528910256.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:36.206Z,1528910256.206 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:36.228Z,1528910256.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:36.605Z,1528910256.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:36.623Z,1528910256.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:36.991Z,1528910256.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:37.021Z,1528910257.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:37.387Z,1528910257.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:37.415Z,1528910257.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:37.788Z,1528910257.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:37.816Z,1528910257.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:38.187Z,1528910258.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:38.216Z,1528910258.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:38.605Z,1528910258.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:38.623Z,1528910258.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:39.008Z,1528910259.008 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:39.026Z,1528910259.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:39.405Z,1528910259.405 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:39.423Z,1528910259.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:39.783Z,1528910259.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:39.820Z,1528910259.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:40.187Z,1528910260.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:40.229Z,1528910260.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:40.583Z,1528910260.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:40.623Z,1528910260.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:43.692Z,1528910263.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:43.718Z,1528910263.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:43.810Z,1528910263.810 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180613T032335/Courier0320.lzma
2018-06-13T17:17:43.839Z,1528910263.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:43.865Z,1528910263.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:44.253Z,1528910264.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:44.271Z,1528910264.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:44.606Z,1528910264.606 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0320.lzma.bak
2018-06-13T17:17:44.606Z,1528910264.606 [DataOverHttps](INFO): SBD MOMSN=8329610
2018-06-13T17:17:44.646Z,1528910264.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:44.682Z,1528910264.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:46.552Z,1528910266.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:46.572Z,1528910266.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:46.683Z,1528910266.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:46.712Z,1528910266.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:47.091Z,1528910267.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:47.123Z,1528910267.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:47.491Z,1528910267.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:47.524Z,1528910267.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:47.892Z,1528910267.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:47.924Z,1528910267.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:51.017Z,1528910271.017 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:51.035Z,1528910271.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:51.157Z,1528910271.157 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:51.215Z,1528910271.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:51.563Z,1528910271.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:51.581Z,1528910271.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:51.961Z,1528910271.961 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:51.978Z,1528910271.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:52.339Z,1528910272.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:52.371Z,1528910272.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:52.743Z,1528910272.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:52.771Z,1528910272.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:53.139Z,1528910273.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:53.176Z,1528910273.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:53.556Z,1528910273.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:53.574Z,1528910273.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:53.963Z,1528910273.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:53.982Z,1528910273.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:54.360Z,1528910274.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:54.377Z,1528910274.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:54.739Z,1528910274.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:54.778Z,1528910274.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:55.143Z,1528910275.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:55.175Z,1528910275.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:55.543Z,1528910275.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:55.576Z,1528910275.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:55.944Z,1528910275.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:55.975Z,1528910275.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:56.343Z,1528910276.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:56.380Z,1528910276.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:56.765Z,1528910276.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:56.783Z,1528910276.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:17:57.152Z,1528910277.152 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:17:57.178Z,1528910277.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:00.274Z,1528910280.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:00.292Z,1528910280.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:00.373Z,1528910280.373 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0321.lzma
2018-06-13T17:18:00.394Z,1528910280.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:00.430Z,1528910280.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:00.800Z,1528910280.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:00.832Z,1528910280.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:01.174Z,1528910281.174 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0321.lzma.bak
2018-06-13T17:18:01.174Z,1528910281.174 [DataOverHttps](INFO): SBD MOMSN=8329613
2018-06-13T17:18:01.204Z,1528910281.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:01.246Z,1528910281.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:03.089Z,1528910283.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:03.107Z,1528910283.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:03.111Z,1528910283.111 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T17:18:03.111Z,1528910283.111 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T17:18:03.111Z,1528910283.111 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T17:18:03.249Z,1528910283.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:03.289Z,1528910283.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:03.650Z,1528910283.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:03.683Z,1528910283.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:06.780Z,1528910286.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:06.798Z,1528910286.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:06.899Z,1528910286.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:06.947Z,1528910286.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:07.328Z,1528910287.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:07.352Z,1528910287.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:07.724Z,1528910287.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:07.742Z,1528910287.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:08.113Z,1528910288.113 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:08.147Z,1528910288.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:08.503Z,1528910288.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:08.534Z,1528910288.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:08.904Z,1528910288.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:08.938Z,1528910288.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:09.303Z,1528910289.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:09.320Z,1528910289.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:09.717Z,1528910289.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:09.742Z,1528910289.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:10.118Z,1528910290.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:10.152Z,1528910290.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:10.517Z,1528910290.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:10.557Z,1528910290.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:10.906Z,1528910290.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:10.924Z,1528910290.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:11.302Z,1528910291.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:11.320Z,1528910291.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:11.706Z,1528910291.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:11.728Z,1528910291.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:12.106Z,1528910292.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:12.124Z,1528910292.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:12.517Z,1528910292.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:12.551Z,1528910292.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:12.921Z,1528910292.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:12.959Z,1528910292.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:13.318Z,1528910293.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:13.359Z,1528910293.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:13.710Z,1528910293.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:13.728Z,1528910293.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:14.108Z,1528910294.108 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:14.132Z,1528910294.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:14.517Z,1528910294.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:14.535Z,1528910294.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:14.915Z,1528910294.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:14.932Z,1528910294.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:15.314Z,1528910295.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:15.336Z,1528910295.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:15.710Z,1528910295.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:15.728Z,1528910295.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:16.103Z,1528910296.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:16.127Z,1528910296.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:16.509Z,1528910296.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:16.527Z,1528910296.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:16.917Z,1528910296.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:16.944Z,1528910296.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:17.318Z,1528910297.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:17.340Z,1528910297.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:17.718Z,1528910297.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:17.740Z,1528910297.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:18.110Z,1528910298.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:18.128Z,1528910298.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:18.503Z,1528910298.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:18.526Z,1528910298.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:18.910Z,1528910298.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:18.927Z,1528910298.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:19.310Z,1528910299.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:19.328Z,1528910299.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:19.718Z,1528910299.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:19.736Z,1528910299.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:20.118Z,1528910300.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:20.140Z,1528910300.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:20.519Z,1528910300.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:20.537Z,1528910300.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:20.903Z,1528910300.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:20.926Z,1528910300.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:21.309Z,1528910301.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:21.326Z,1528910301.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:21.710Z,1528910301.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:21.729Z,1528910301.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:22.103Z,1528910302.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:22.127Z,1528910302.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:22.509Z,1528910302.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:22.527Z,1528910302.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:22.918Z,1528910302.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:22.936Z,1528910302.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:23.318Z,1528910303.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:23.336Z,1528910303.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:23.718Z,1528910303.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:23.737Z,1528910303.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:24.110Z,1528910304.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:24.128Z,1528910304.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:24.506Z,1528910304.506 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:24.524Z,1528910304.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:24.910Z,1528910304.910 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:24.928Z,1528910304.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:25.310Z,1528910305.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:25.328Z,1528910305.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:25.715Z,1528910305.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:25.733Z,1528910305.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:26.118Z,1528910306.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:26.140Z,1528910306.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:26.520Z,1528910306.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:26.538Z,1528910306.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:26.909Z,1528910306.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:26.927Z,1528910306.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:27.303Z,1528910307.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:27.327Z,1528910307.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:27.703Z,1528910307.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:27.729Z,1528910307.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:28.104Z,1528910308.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:28.129Z,1528910308.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:28.508Z,1528910308.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:28.527Z,1528910308.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:28.920Z,1528910308.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:28.938Z,1528910308.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:29.318Z,1528910309.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:29.357Z,1528910309.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:29.714Z,1528910309.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:29.744Z,1528910309.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:30.099Z,1528910310.099 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:30.129Z,1528910310.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:30.503Z,1528910310.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:30.532Z,1528910310.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:30.904Z,1528910310.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:30.932Z,1528910310.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:31.304Z,1528910311.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:31.343Z,1528910311.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:31.724Z,1528910311.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:31.743Z,1528910311.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:32.123Z,1528910312.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:32.142Z,1528910312.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:32.517Z,1528910312.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:32.543Z,1528910312.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:32.900Z,1528910312.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:32.936Z,1528910312.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:33.303Z,1528910313.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:33.340Z,1528910313.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:33.704Z,1528910313.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:33.730Z,1528910313.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:34.100Z,1528910314.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:34.118Z,1528910314.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:34.503Z,1528910314.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:34.521Z,1528910314.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:34.922Z,1528910314.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:34.952Z,1528910314.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:35.321Z,1528910315.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:35.351Z,1528910315.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:35.717Z,1528910315.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:35.751Z,1528910315.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:36.104Z,1528910316.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:36.122Z,1528910316.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:36.502Z,1528910316.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:36.520Z,1528910316.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:36.907Z,1528910316.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:36.924Z,1528910316.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:37.306Z,1528910317.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:37.324Z,1528910317.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:37.714Z,1528910317.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:37.732Z,1528910317.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:38.118Z,1528910318.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:38.160Z,1528910318.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:38.518Z,1528910318.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:38.535Z,1528910318.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:38.903Z,1528910318.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:38.933Z,1528910318.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:39.308Z,1528910319.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:39.326Z,1528910319.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:39.707Z,1528910319.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:39.741Z,1528910319.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:40.110Z,1528910320.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:40.128Z,1528910320.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:40.507Z,1528910320.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:40.530Z,1528910320.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:40.921Z,1528910320.921 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:40.939Z,1528910320.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:41.316Z,1528910321.316 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:41.340Z,1528910321.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:41.718Z,1528910321.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:41.735Z,1528910321.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:42.110Z,1528910322.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:42.128Z,1528910322.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:42.503Z,1528910322.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:42.526Z,1528910322.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:42.902Z,1528910322.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:42.936Z,1528910322.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:43.302Z,1528910323.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:43.332Z,1528910323.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:43.719Z,1528910323.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:43.737Z,1528910323.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:44.123Z,1528910324.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:44.141Z,1528910324.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:44.518Z,1528910324.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:44.565Z,1528910324.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:44.903Z,1528910324.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:44.936Z,1528910324.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:45.303Z,1528910325.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:45.339Z,1528910325.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:45.703Z,1528910325.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:45.738Z,1528910325.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:46.100Z,1528910326.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:46.134Z,1528910326.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:46.582Z,1528910326.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:46.654Z,1528910326.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:46.954Z,1528910326.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:46.987Z,1528910326.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:47.314Z,1528910327.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:47.366Z,1528910327.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:47.725Z,1528910327.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:47.907Z,1528910327.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:48.103Z,1528910328.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:48.229Z,1528910328.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:48.504Z,1528910328.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:48.649Z,1528910328.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:48.904Z,1528910328.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:48.942Z,1528910328.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:49.303Z,1528910329.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:49.320Z,1528910329.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:49.710Z,1528910329.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:49.744Z,1528910329.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:50.121Z,1528910330.121 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:50.148Z,1528910330.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:50.524Z,1528910330.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:50.548Z,1528910330.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:50.899Z,1528910330.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:50.935Z,1528910330.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:51.303Z,1528910331.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:51.330Z,1528910331.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:51.703Z,1528910331.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:51.732Z,1528910331.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:52.100Z,1528910332.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:52.135Z,1528910332.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:52.504Z,1528910332.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:52.531Z,1528910332.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:52.920Z,1528910332.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:52.937Z,1528910332.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:53.320Z,1528910333.320 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:53.338Z,1528910333.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:53.719Z,1528910333.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:53.737Z,1528910333.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:54.103Z,1528910334.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:54.132Z,1528910334.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:54.499Z,1528910334.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:54.540Z,1528910334.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:54.904Z,1528910334.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:54.938Z,1528910334.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:55.303Z,1528910335.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:55.340Z,1528910335.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:55.709Z,1528910335.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:55.743Z,1528910335.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:56.122Z,1528910336.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:56.140Z,1528910336.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:56.517Z,1528910336.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:56.544Z,1528910336.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:56.899Z,1528910336.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:56.932Z,1528910336.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:57.304Z,1528910337.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:57.339Z,1528910337.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:57.703Z,1528910337.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:57.742Z,1528910337.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:58.100Z,1528910338.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:58.139Z,1528910338.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:58.503Z,1528910338.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:58.536Z,1528910338.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:58.917Z,1528910338.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:58.952Z,1528910338.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:59.314Z,1528910339.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:59.348Z,1528910339.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:18:59.713Z,1528910339.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:18:59.747Z,1528910339.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:00.103Z,1528910340.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:00.121Z,1528910340.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:00.503Z,1528910340.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:00.528Z,1528910340.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:00.905Z,1528910340.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:00.923Z,1528910340.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:01.306Z,1528910341.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:01.325Z,1528910341.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:01.713Z,1528910341.713 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:01.731Z,1528910341.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:02.117Z,1528910342.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:02.154Z,1528910342.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:02.517Z,1528910342.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:02.535Z,1528910342.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:02.903Z,1528910342.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:02.925Z,1528910342.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:03.310Z,1528910343.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:03.328Z,1528910343.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:03.708Z,1528910343.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:03.732Z,1528910343.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:04.110Z,1528910344.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:04.128Z,1528910344.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:04.510Z,1528910344.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:04.528Z,1528910344.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:04.917Z,1528910344.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:04.935Z,1528910344.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:05.317Z,1528910345.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:05.335Z,1528910345.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:05.721Z,1528910345.721 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:05.739Z,1528910345.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:06.114Z,1528910346.114 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:06.133Z,1528910346.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:06.508Z,1528910346.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:06.539Z,1528910346.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:06.915Z,1528910346.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:06.932Z,1528910346.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:10.025Z,1528910350.025 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:10.043Z,1528910350.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:10.207Z,1528910350.207 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:10.241Z,1528910350.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:10.607Z,1528910350.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:10.625Z,1528910350.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:11.009Z,1528910351.009 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:11.035Z,1528910351.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:11.379Z,1528910351.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:11.398Z,1528910351.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:11.783Z,1528910351.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:11.804Z,1528910351.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:12.188Z,1528910352.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:12.206Z,1528910352.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:12.582Z,1528910352.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:12.601Z,1528910352.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:12.998Z,1528910352.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:13.032Z,1528910353.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:13.398Z,1528910353.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:13.416Z,1528910353.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:13.794Z,1528910353.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:13.812Z,1528910353.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:14.189Z,1528910354.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:14.208Z,1528910354.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:14.587Z,1528910354.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:14.605Z,1528910354.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:14.990Z,1528910354.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:15.008Z,1528910355.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:15.386Z,1528910355.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:15.429Z,1528910355.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:15.798Z,1528910355.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:15.816Z,1528910355.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:16.199Z,1528910356.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:16.240Z,1528910356.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:16.595Z,1528910356.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:16.620Z,1528910356.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:16.990Z,1528910356.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:17.009Z,1528910357.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:17.383Z,1528910357.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:17.408Z,1528910357.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:17.790Z,1528910357.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:17.808Z,1528910357.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:18.191Z,1528910358.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:18.211Z,1528910358.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:18.583Z,1528910358.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:18.616Z,1528910358.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:19.002Z,1528910359.002 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:19.020Z,1528910359.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:19.395Z,1528910359.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:19.415Z,1528910359.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:19.795Z,1528910359.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:19.821Z,1528910359.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:20.187Z,1528910360.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:20.221Z,1528910360.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:20.587Z,1528910360.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:20.606Z,1528910360.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:20.991Z,1528910360.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:21.010Z,1528910361.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:21.388Z,1528910361.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:21.414Z,1528910361.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:21.800Z,1528910361.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:21.819Z,1528910361.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:22.199Z,1528910362.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:22.228Z,1528910362.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:22.600Z,1528910362.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:22.620Z,1528910362.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:22.979Z,1528910362.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:23.019Z,1528910363.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:23.387Z,1528910363.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:23.412Z,1528910363.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:23.790Z,1528910363.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:23.808Z,1528910363.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:24.179Z,1528910364.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:24.220Z,1528910364.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:24.583Z,1528910364.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:24.620Z,1528910364.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:24.998Z,1528910364.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:25.032Z,1528910365.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:25.400Z,1528910365.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:25.417Z,1528910365.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:25.801Z,1528910365.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:25.819Z,1528910365.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:26.183Z,1528910366.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:26.219Z,1528910366.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:26.579Z,1528910366.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:26.608Z,1528910366.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:26.984Z,1528910366.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:27.016Z,1528910367.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:27.383Z,1528910367.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:27.421Z,1528910367.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:27.801Z,1528910367.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:27.819Z,1528910367.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:28.205Z,1528910368.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:28.227Z,1528910368.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:28.600Z,1528910368.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:28.618Z,1528910368.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:28.979Z,1528910368.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:29.019Z,1528910369.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:29.383Z,1528910369.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:29.411Z,1528910369.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:29.787Z,1528910369.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:29.829Z,1528910369.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:30.179Z,1528910370.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:30.198Z,1528910370.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:30.583Z,1528910370.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:30.602Z,1528910370.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:30.998Z,1528910370.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:31.031Z,1528910371.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:31.402Z,1528910371.402 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:31.430Z,1528910371.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:31.798Z,1528910371.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:31.831Z,1528910371.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:32.187Z,1528910372.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:32.234Z,1528910372.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:32.583Z,1528910372.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:32.602Z,1528910372.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:32.988Z,1528910372.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:33.006Z,1528910373.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:33.386Z,1528910373.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:33.404Z,1528910373.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:33.793Z,1528910373.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:33.811Z,1528910373.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:34.198Z,1528910374.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:34.216Z,1528910374.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:34.594Z,1528910374.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:34.613Z,1528910374.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:34.985Z,1528910374.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:35.004Z,1528910375.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:35.389Z,1528910375.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:35.407Z,1528910375.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:35.786Z,1528910375.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:35.805Z,1528910375.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:36.186Z,1528910376.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:36.204Z,1528910376.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:36.588Z,1528910376.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:36.606Z,1528910376.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:36.993Z,1528910376.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:37.012Z,1528910377.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:37.398Z,1528910377.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:37.416Z,1528910377.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:37.794Z,1528910377.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:37.812Z,1528910377.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:38.188Z,1528910378.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:38.207Z,1528910378.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:38.585Z,1528910378.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:38.603Z,1528910378.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:38.988Z,1528910378.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:39.006Z,1528910379.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:39.388Z,1528910379.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:39.407Z,1528910379.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:39.798Z,1528910379.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:39.815Z,1528910379.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:40.198Z,1528910380.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:40.216Z,1528910380.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:40.594Z,1528910380.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:40.620Z,1528910380.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:40.989Z,1528910380.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:41.008Z,1528910381.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:41.382Z,1528910381.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:41.416Z,1528910381.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:41.787Z,1528910381.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:41.811Z,1528910381.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:42.180Z,1528910382.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:42.208Z,1528910382.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:42.587Z,1528910382.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:42.611Z,1528910382.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:42.994Z,1528910382.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:43.021Z,1528910383.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:43.404Z,1528910383.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:43.422Z,1528910383.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:43.800Z,1528910383.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:43.818Z,1528910383.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:44.183Z,1528910384.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:44.217Z,1528910384.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:44.579Z,1528910384.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:44.608Z,1528910384.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:44.984Z,1528910384.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:45.016Z,1528910385.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:45.383Z,1528910385.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:45.419Z,1528910385.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:45.799Z,1528910385.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:45.817Z,1528910385.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:46.204Z,1528910386.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:46.222Z,1528910386.222 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:46.223Z,1528910386.223 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 277
2018-06-13T17:19:46.223Z,1528910386.223 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:19:46.224Z,1528910386.224 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:46.224Z,1528910386.224 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 277
2018-06-13T17:19:46.225Z,1528910386.225 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:19:46.226Z,1528910386.226 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:46.227Z,1528910386.227 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 277
2018-06-13T17:19:46.227Z,1528910386.227 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:19:46.305Z,1528910386.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:19:46.305Z,1528910386.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:19:46.306Z,1528910386.306 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:19:46.598Z,1528910386.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:46.697Z,1528910386.697 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:19:46.697Z,1528910386.697 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 277
2018-06-13T17:19:46.697Z,1528910386.697 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:19:46.698Z,1528910386.698 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 277
2018-06-13T17:19:46.698Z,1528910386.698 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:19:46.698Z,1528910386.698 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 277
2018-06-13T17:19:46.980Z,1528910386.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:47.023Z,1528910387.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:19:47.024Z,1528910387.024 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:19:47.024Z,1528910387.024 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:19:47.024Z,1528910387.024 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:19:47.025Z,1528910387.025 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:19:47.025Z,1528910387.025 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:19:47.025Z,1528910387.025 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:19:47.026Z,1528910387.026 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:19:47.026Z,1528910387.026 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:19:47.379Z,1528910387.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:47.420Z,1528910387.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:19:47.421Z,1528910387.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:47.783Z,1528910387.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:47.819Z,1528910387.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:19:47.820Z,1528910387.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:48.179Z,1528910388.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:48.221Z,1528910388.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:19:48.222Z,1528910388.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:48.583Z,1528910388.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:48.619Z,1528910388.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:19:48.620Z,1528910388.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:48.994Z,1528910388.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:49.032Z,1528910389.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:19:49.033Z,1528910389.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:49.393Z,1528910389.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:49.428Z,1528910389.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:19:49.429Z,1528910389.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:49.804Z,1528910389.804 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:49.822Z,1528910389.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:19:49.823Z,1528910389.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:50.183Z,1528910390.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:50.216Z,1528910390.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:19:50.221Z,1528910390.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:50.583Z,1528910390.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:50.625Z,1528910390.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:19:50.626Z,1528910390.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:50.984Z,1528910390.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:51.021Z,1528910391.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:19:51.022Z,1528910391.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:51.387Z,1528910391.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:51.405Z,1528910391.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:19:51.406Z,1528910391.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:51.798Z,1528910391.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:51.835Z,1528910391.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:19:51.836Z,1528910391.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:52.198Z,1528910392.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:52.236Z,1528910392.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:19:52.236Z,1528910392.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:52.598Z,1528910392.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:52.615Z,1528910392.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:19:52.616Z,1528910392.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:52.988Z,1528910392.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:53.006Z,1528910393.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:19:53.007Z,1528910393.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:53.383Z,1528910393.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:53.415Z,1528910393.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:19:53.416Z,1528910393.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:53.788Z,1528910393.788 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:53.812Z,1528910393.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:19:53.814Z,1528910393.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:54.190Z,1528910394.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:54.208Z,1528910394.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:19:54.209Z,1528910394.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:54.589Z,1528910394.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:54.607Z,1528910394.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:19:54.608Z,1528910394.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:54.994Z,1528910394.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:55.012Z,1528910395.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:19:55.013Z,1528910395.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:55.398Z,1528910395.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:55.415Z,1528910395.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:19:55.416Z,1528910395.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:55.800Z,1528910395.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:55.817Z,1528910395.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:19:55.818Z,1528910395.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:56.187Z,1528910396.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:56.224Z,1528910396.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:19:56.224Z,1528910396.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:56.587Z,1528910396.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:56.605Z,1528910396.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:19:56.606Z,1528910396.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:56.989Z,1528910396.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:57.007Z,1528910397.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:19:57.008Z,1528910397.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:57.387Z,1528910397.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:57.411Z,1528910397.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:19:57.412Z,1528910397.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:57.800Z,1528910397.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:57.819Z,1528910397.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:19:57.820Z,1528910397.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:58.199Z,1528910398.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:58.217Z,1528910398.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:19:58.218Z,1528910398.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:58.599Z,1528910398.599 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:58.617Z,1528910398.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:19:58.618Z,1528910398.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:58.979Z,1528910398.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:59.008Z,1528910399.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:19:59.009Z,1528910399.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:59.380Z,1528910399.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:59.411Z,1528910399.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:19:59.412Z,1528910399.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:19:59.787Z,1528910399.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:19:59.817Z,1528910399.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:19:59.818Z,1528910399.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:00.184Z,1528910400.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:00.213Z,1528910400.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:20:00.214Z,1528910400.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:00.584Z,1528910400.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:00.624Z,1528910400.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:20:00.629Z,1528910400.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:01.001Z,1528910401.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:01.019Z,1528910401.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:20:01.019Z,1528910401.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:01.406Z,1528910401.406 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:01.423Z,1528910401.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:20:01.424Z,1528910401.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:01.801Z,1528910401.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:01.819Z,1528910401.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:20:01.819Z,1528910401.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:02.183Z,1528910402.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:02.230Z,1528910402.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:20:02.231Z,1528910402.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:02.583Z,1528910402.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:02.627Z,1528910402.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:20:02.628Z,1528910402.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:02.980Z,1528910402.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:03.021Z,1528910403.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:20:03.022Z,1528910403.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:03.387Z,1528910403.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:03.415Z,1528910403.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:20:03.416Z,1528910403.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:03.801Z,1528910403.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:03.833Z,1528910403.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:20:03.834Z,1528910403.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:06.914Z,1528910406.914 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:06.932Z,1528910406.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:07.081Z,1528910407.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:07.111Z,1528910407.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:07.468Z,1528910407.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:07.486Z,1528910407.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:07.865Z,1528910407.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:07.883Z,1528910407.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:08.263Z,1528910408.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:08.288Z,1528910408.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:08.664Z,1528910408.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:08.682Z,1528910408.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:09.067Z,1528910409.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:09.085Z,1528910409.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:09.474Z,1528910409.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:09.492Z,1528910409.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:09.874Z,1528910409.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:09.892Z,1528910409.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:10.265Z,1528910410.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:10.284Z,1528910410.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:10.664Z,1528910410.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:10.692Z,1528910410.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:11.067Z,1528910411.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:11.086Z,1528910411.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:11.459Z,1528910411.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:11.496Z,1528910411.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:11.870Z,1528910411.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:11.888Z,1528910411.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:12.273Z,1528910412.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:12.291Z,1528910412.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:12.670Z,1528910412.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:12.696Z,1528910412.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:13.065Z,1528910413.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:13.083Z,1528910413.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:13.470Z,1528910413.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:13.488Z,1528910413.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:13.859Z,1528910413.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:13.883Z,1528910413.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:14.259Z,1528910414.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:14.291Z,1528910414.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:14.663Z,1528910414.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:14.696Z,1528910414.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:15.071Z,1528910415.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:15.088Z,1528910415.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:15.474Z,1528910415.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:15.492Z,1528910415.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:15.871Z,1528910415.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:15.889Z,1528910415.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:16.259Z,1528910416.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:16.283Z,1528910416.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:16.665Z,1528910416.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:16.683Z,1528910416.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:17.067Z,1528910417.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:17.085Z,1528910417.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:17.461Z,1528910417.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:17.480Z,1528910417.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:17.870Z,1528910417.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:17.888Z,1528910417.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:18.273Z,1528910418.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:18.291Z,1528910418.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:18.670Z,1528910418.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:18.688Z,1528910418.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:19.063Z,1528910419.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:19.094Z,1528910419.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:19.458Z,1528910419.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:19.488Z,1528910419.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:19.865Z,1528910419.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:19.883Z,1528910419.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:20.260Z,1528910420.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:20.292Z,1528910420.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:20.663Z,1528910420.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:20.688Z,1528910420.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:21.071Z,1528910421.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:21.089Z,1528910421.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:21.474Z,1528910421.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:21.492Z,1528910421.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:21.875Z,1528910421.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:21.900Z,1528910421.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:22.258Z,1528910422.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:22.292Z,1528910422.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:22.659Z,1528910422.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:22.690Z,1528910422.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:23.064Z,1528910423.064 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:23.095Z,1528910423.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:23.465Z,1528910423.465 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:23.483Z,1528910423.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:23.874Z,1528910423.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:23.892Z,1528910423.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:24.279Z,1528910424.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:24.298Z,1528910424.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:24.670Z,1528910424.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:24.692Z,1528910424.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:25.065Z,1528910425.065 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:25.083Z,1528910425.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:25.463Z,1528910425.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:25.489Z,1528910425.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:25.855Z,1528910425.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:25.891Z,1528910425.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:26.260Z,1528910426.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:26.295Z,1528910426.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:26.659Z,1528910426.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:26.688Z,1528910426.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:27.077Z,1528910427.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:27.095Z,1528910427.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:27.479Z,1528910427.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:27.497Z,1528910427.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:27.874Z,1528910427.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:27.897Z,1528910427.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:28.259Z,1528910428.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:28.286Z,1528910428.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:28.659Z,1528910428.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:28.686Z,1528910428.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:29.060Z,1528910429.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:29.100Z,1528910429.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:29.459Z,1528910429.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:29.491Z,1528910429.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:29.876Z,1528910429.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:29.894Z,1528910429.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:30.280Z,1528910430.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:30.298Z,1528910430.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:30.666Z,1528910430.666 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:30.699Z,1528910430.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:31.059Z,1528910431.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:31.096Z,1528910431.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:31.459Z,1528910431.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:31.500Z,1528910431.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:31.856Z,1528910431.856 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:31.890Z,1528910431.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:32.260Z,1528910432.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:32.299Z,1528910432.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:32.659Z,1528910432.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:32.693Z,1528910432.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:33.073Z,1528910433.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:33.100Z,1528910433.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:33.473Z,1528910433.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:33.500Z,1528910433.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:33.873Z,1528910433.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:33.903Z,1528910433.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:34.259Z,1528910434.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:34.277Z,1528910434.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:34.663Z,1528910434.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:34.705Z,1528910434.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:35.063Z,1528910435.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:35.108Z,1528910435.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:35.462Z,1528910435.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:35.480Z,1528910435.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:35.873Z,1528910435.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:35.910Z,1528910435.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:36.277Z,1528910436.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:36.319Z,1528910436.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:36.677Z,1528910436.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:36.710Z,1528910436.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:37.063Z,1528910437.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:37.080Z,1528910437.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:37.463Z,1528910437.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:37.482Z,1528910437.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:37.859Z,1528910437.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:37.884Z,1528910437.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:38.263Z,1528910438.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:38.281Z,1528910438.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:38.663Z,1528910438.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:38.680Z,1528910438.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:39.066Z,1528910439.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:39.084Z,1528910439.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:39.477Z,1528910439.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:39.510Z,1528910439.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:39.877Z,1528910439.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:39.911Z,1528910439.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:40.263Z,1528910440.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:40.288Z,1528910440.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:40.663Z,1528910440.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:40.681Z,1528910440.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:41.063Z,1528910441.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:41.081Z,1528910441.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:41.463Z,1528910441.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:41.481Z,1528910441.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:41.870Z,1528910441.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:41.888Z,1528910441.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:42.274Z,1528910442.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:42.292Z,1528910442.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:42.667Z,1528910442.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:42.686Z,1528910442.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:43.066Z,1528910443.066 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:43.084Z,1528910443.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:43.464Z,1528910443.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:43.498Z,1528910443.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:43.867Z,1528910443.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:43.885Z,1528910443.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:44.266Z,1528910444.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:44.284Z,1528910444.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:44.663Z,1528910444.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:44.700Z,1528910444.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:45.072Z,1528910445.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:45.091Z,1528910445.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:45.476Z,1528910445.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:45.494Z,1528910445.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:45.875Z,1528910445.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:45.893Z,1528910445.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:46.267Z,1528910446.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:46.285Z,1528910446.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:46.663Z,1528910446.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:46.687Z,1528910446.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:47.063Z,1528910447.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:47.100Z,1528910447.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:47.455Z,1528910447.455 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:47.485Z,1528910447.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:47.875Z,1528910447.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:47.897Z,1528910447.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:48.279Z,1528910448.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:48.304Z,1528910448.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:48.675Z,1528910448.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:48.693Z,1528910448.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:49.063Z,1528910449.063 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:49.087Z,1528910449.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:49.463Z,1528910449.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:49.489Z,1528910449.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:49.855Z,1528910449.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:49.892Z,1528910449.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:50.264Z,1528910450.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:50.291Z,1528910450.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:50.663Z,1528910450.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:50.688Z,1528910450.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:51.075Z,1528910451.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:51.093Z,1528910451.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:51.478Z,1528910451.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:51.496Z,1528910451.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:51.879Z,1528910451.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:51.897Z,1528910451.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:52.255Z,1528910452.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:52.290Z,1528910452.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:52.659Z,1528910452.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:52.695Z,1528910452.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:53.060Z,1528910453.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:53.091Z,1528910453.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:53.459Z,1528910453.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:53.486Z,1528910453.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:53.875Z,1528910453.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:53.900Z,1528910453.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:54.279Z,1528910454.279 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:54.297Z,1528910454.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:54.671Z,1528910454.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:54.689Z,1528910454.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:55.059Z,1528910455.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:55.096Z,1528910455.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:55.459Z,1528910455.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:55.498Z,1528910455.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:55.859Z,1528910455.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:55.897Z,1528910455.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:56.276Z,1528910456.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:56.345Z,1528910456.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:56.659Z,1528910456.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:56.700Z,1528910456.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:57.070Z,1528910457.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:57.098Z,1528910457.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:57.473Z,1528910457.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:57.500Z,1528910457.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:57.873Z,1528910457.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:57.902Z,1528910457.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:58.259Z,1528910458.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:58.299Z,1528910458.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:58.659Z,1528910458.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:58.693Z,1528910458.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:59.060Z,1528910459.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:59.078Z,1528910459.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:59.463Z,1528910459.463 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:59.481Z,1528910459.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:20:59.873Z,1528910459.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:20:59.906Z,1528910459.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:00.273Z,1528910460.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:00.307Z,1528910460.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:00.673Z,1528910460.673 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:00.706Z,1528910460.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:01.062Z,1528910461.062 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:01.084Z,1528910461.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:01.462Z,1528910461.462 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:01.480Z,1528910461.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:01.858Z,1528910461.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:01.877Z,1528910461.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:02.272Z,1528910462.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:02.306Z,1528910462.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:02.663Z,1528910462.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:02.681Z,1528910462.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:03.074Z,1528910463.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:03.092Z,1528910463.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:03.473Z,1528910463.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:03.491Z,1528910463.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:03.878Z,1528910463.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:03.896Z,1528910463.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:04.268Z,1528910464.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:04.286Z,1528910464.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:04.670Z,1528910464.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:04.687Z,1528910464.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:05.070Z,1528910465.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:05.088Z,1528910465.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:05.468Z,1528910465.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:05.486Z,1528910465.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:05.873Z,1528910465.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:05.891Z,1528910465.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:06.277Z,1528910466.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:06.295Z,1528910466.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:06.671Z,1528910466.671 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:06.689Z,1528910466.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:07.068Z,1528910467.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:07.086Z,1528910467.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:07.469Z,1528910467.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:07.487Z,1528910467.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:10.578Z,1528910470.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:10.617Z,1528910470.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:10.739Z,1528910470.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:10.776Z,1528910470.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:11.145Z,1528910471.145 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:11.173Z,1528910471.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:11.549Z,1528910471.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:11.575Z,1528910471.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:11.941Z,1528910471.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:11.976Z,1528910471.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:12.330Z,1528910472.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:12.348Z,1528910472.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:12.727Z,1528910472.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:12.744Z,1528910472.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:13.130Z,1528910473.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:13.152Z,1528910473.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:13.530Z,1528910473.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:13.548Z,1528910473.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:13.937Z,1528910473.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:13.971Z,1528910473.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:14.341Z,1528910474.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:14.375Z,1528910474.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:14.742Z,1528910474.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:14.776Z,1528910474.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:15.130Z,1528910475.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:15.148Z,1528910475.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:15.530Z,1528910475.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:15.548Z,1528910475.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:15.930Z,1528910475.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:15.948Z,1528910475.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:16.329Z,1528910476.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:16.352Z,1528910476.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:16.732Z,1528910476.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:16.750Z,1528910476.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:17.141Z,1528910477.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:17.160Z,1528910477.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:17.541Z,1528910477.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:17.559Z,1528910477.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:17.934Z,1528910477.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:17.956Z,1528910477.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:18.334Z,1528910478.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:18.360Z,1528910478.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:18.727Z,1528910478.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:18.749Z,1528910478.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:19.132Z,1528910479.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:19.150Z,1528910479.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:19.526Z,1528910479.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:19.556Z,1528910479.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:19.938Z,1528910479.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:19.956Z,1528910479.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:20.341Z,1528910480.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:20.359Z,1528910480.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:20.741Z,1528910480.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:20.760Z,1528910480.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:21.126Z,1528910481.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:21.156Z,1528910481.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:21.533Z,1528910481.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:21.551Z,1528910481.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:21.931Z,1528910481.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:21.957Z,1528910481.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:22.324Z,1528910482.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:22.354Z,1528910482.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:22.723Z,1528910482.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:22.761Z,1528910482.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:23.147Z,1528910483.147 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:23.181Z,1528910483.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:23.548Z,1528910483.548 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:23.573Z,1528910483.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:23.937Z,1528910483.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:23.971Z,1528910483.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:24.328Z,1528910484.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:24.359Z,1528910484.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:24.727Z,1528910484.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:24.761Z,1528910484.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:25.128Z,1528910485.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:25.172Z,1528910485.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:25.531Z,1528910485.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:25.576Z,1528910485.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:25.942Z,1528910485.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:25.976Z,1528910485.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:26.346Z,1528910486.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:26.380Z,1528910486.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:26.741Z,1528910486.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:26.760Z,1528910486.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:27.127Z,1528910487.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:27.158Z,1528910487.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:27.534Z,1528910487.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:27.552Z,1528910487.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:27.934Z,1528910487.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:27.952Z,1528910487.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:28.328Z,1528910488.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:28.359Z,1528910488.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:28.731Z,1528910488.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:28.756Z,1528910488.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:29.144Z,1528910489.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:29.162Z,1528910489.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:29.543Z,1528910489.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:29.562Z,1528910489.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:29.943Z,1528910489.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:29.961Z,1528910489.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:30.334Z,1528910490.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:30.352Z,1528910490.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:30.727Z,1528910490.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:30.750Z,1528910490.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:31.140Z,1528910491.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:31.158Z,1528910491.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:31.527Z,1528910491.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:31.562Z,1528910491.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:31.940Z,1528910491.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:31.958Z,1528910491.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:32.347Z,1528910492.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:32.365Z,1528910492.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:32.748Z,1528910492.748 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:32.766Z,1528910492.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:33.123Z,1528910493.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:33.161Z,1528910493.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:33.532Z,1528910493.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:33.556Z,1528910493.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:33.924Z,1528910493.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:33.954Z,1528910493.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:34.324Z,1528910494.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:34.359Z,1528910494.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:34.727Z,1528910494.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:34.764Z,1528910494.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:35.143Z,1528910495.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:35.162Z,1528910495.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:35.543Z,1528910495.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:35.568Z,1528910495.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:35.938Z,1528910495.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:35.971Z,1528910495.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:36.323Z,1528910496.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:36.351Z,1528910496.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:36.727Z,1528910496.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:36.754Z,1528910496.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:37.128Z,1528910497.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:37.163Z,1528910497.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:37.527Z,1528910497.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:37.555Z,1528910497.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:37.939Z,1528910497.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:37.958Z,1528910497.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:38.347Z,1528910498.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:38.365Z,1528910498.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:38.743Z,1528910498.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:38.772Z,1528910498.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:39.123Z,1528910499.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:39.161Z,1528910499.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:39.527Z,1528910499.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:39.560Z,1528910499.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:39.923Z,1528910499.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:39.940Z,1528910499.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:40.328Z,1528910500.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:40.358Z,1528910500.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:40.728Z,1528910500.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:40.745Z,1528910500.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:41.141Z,1528910501.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:41.179Z,1528910501.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:41.537Z,1528910501.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:41.570Z,1528910501.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:41.937Z,1528910501.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:41.971Z,1528910501.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:42.331Z,1528910502.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:42.348Z,1528910502.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:42.727Z,1528910502.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:42.752Z,1528910502.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:43.130Z,1528910503.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:43.152Z,1528910503.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:43.530Z,1528910503.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:43.547Z,1528910503.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:43.909Z,1528910503.909 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T17:21:43.909Z,1528910503.909 [NAL9602] Data Fault, FailCount= 1
2018-06-13T17:21:43.909Z,1528910503.909 [NAL9602](ERROR): Data Fault
2018-06-13T17:21:43.926Z,1528910503.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:43.944Z,1528910503.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:44.021Z,1528910504.021 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T17:21:44.306Z,1528910504.306 [NAL9602](INFO): Powering down
2018-06-13T17:21:44.326Z,1528910504.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:44.356Z,1528910504.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:44.732Z,1528910504.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:44.750Z,1528910504.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:45.128Z,1528910505.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:45.146Z,1528910505.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:45.221Z,1528910505.221 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T17:21:45.221Z,1528910505.221 [NAL9602] No Fault, FailCount= 1
2018-06-13T17:21:45.529Z,1528910505.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:45.552Z,1528910505.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:45.928Z,1528910505.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:45.945Z,1528910505.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:46.332Z,1528910506.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:46.350Z,1528910506.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:46.732Z,1528910506.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:46.749Z,1528910506.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:47.128Z,1528910507.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:47.152Z,1528910507.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:47.533Z,1528910507.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:47.551Z,1528910507.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:47.932Z,1528910507.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:47.949Z,1528910507.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:48.329Z,1528910508.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:48.352Z,1528910508.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:48.732Z,1528910508.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:48.750Z,1528910508.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:49.132Z,1528910509.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:49.149Z,1528910509.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:49.528Z,1528910509.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:49.546Z,1528910509.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:49.932Z,1528910509.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:49.950Z,1528910509.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:50.332Z,1528910510.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:50.349Z,1528910510.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:50.728Z,1528910510.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:50.752Z,1528910510.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:51.132Z,1528910511.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:51.150Z,1528910511.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:51.532Z,1528910511.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:51.549Z,1528910511.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:51.928Z,1528910511.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:51.945Z,1528910511.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:52.333Z,1528910512.333 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:52.351Z,1528910512.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:52.732Z,1528910512.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:52.749Z,1528910512.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:53.128Z,1528910513.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:53.146Z,1528910513.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:53.532Z,1528910513.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:53.550Z,1528910513.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:53.932Z,1528910513.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:53.949Z,1528910513.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:54.329Z,1528910514.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:54.346Z,1528910514.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:54.732Z,1528910514.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:54.750Z,1528910514.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:55.132Z,1528910515.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:55.150Z,1528910515.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:55.528Z,1528910515.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:55.545Z,1528910515.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:55.932Z,1528910515.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:55.950Z,1528910515.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:56.332Z,1528910516.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:56.350Z,1528910516.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:56.728Z,1528910516.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:56.745Z,1528910516.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:57.132Z,1528910517.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:57.150Z,1528910517.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:57.531Z,1528910517.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:57.548Z,1528910517.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:57.928Z,1528910517.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:57.945Z,1528910517.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:58.334Z,1528910518.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:58.351Z,1528910518.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:58.732Z,1528910518.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:58.750Z,1528910518.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:59.129Z,1528910519.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:59.147Z,1528910519.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:59.532Z,1528910519.532 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:59.550Z,1528910519.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:21:59.932Z,1528910519.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:21:59.950Z,1528910519.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:00.328Z,1528910520.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:00.352Z,1528910520.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:00.732Z,1528910520.732 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:00.750Z,1528910520.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:01.133Z,1528910521.133 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:01.151Z,1528910521.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:01.528Z,1528910521.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:01.546Z,1528910521.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:01.932Z,1528910521.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:01.950Z,1528910521.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:02.332Z,1528910522.332 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:02.350Z,1528910522.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:02.729Z,1528910522.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:02.746Z,1528910522.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:03.126Z,1528910523.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:03.161Z,1528910523.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:03.536Z,1528910523.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:03.554Z,1528910523.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:03.933Z,1528910523.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:03.950Z,1528910523.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:07.043Z,1528910527.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:07.061Z,1528910527.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:07.174Z,1528910527.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:07.262Z,1528910527.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:07.575Z,1528910527.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:07.603Z,1528910527.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:07.986Z,1528910527.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:08.004Z,1528910528.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:08.371Z,1528910528.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:08.398Z,1528910528.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:08.771Z,1528910528.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:08.799Z,1528910528.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:09.171Z,1528910529.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:09.199Z,1528910529.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:09.571Z,1528910529.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:09.599Z,1528910529.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:09.972Z,1528910529.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:09.000Z,1528910530.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:10.371Z,1528910530.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:10.404Z,1528910530.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:10.771Z,1528910530.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:10.798Z,1528910530.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:11.170Z,1528910531.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:11.199Z,1528910531.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:11.571Z,1528910531.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:11.599Z,1528910531.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:11.971Z,1528910531.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:12.008Z,1528910532.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:12.365Z,1528910532.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:12.407Z,1528910532.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:12.771Z,1528910532.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:12.799Z,1528910532.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:13.171Z,1528910533.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:13.198Z,1528910533.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:13.571Z,1528910533.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:13.609Z,1528910533.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:13.971Z,1528910533.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:14.004Z,1528910534.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:14.354Z,1528910534.354 [NAL9602](INFO): Powering up NAL9602
2018-06-13T17:22:14.371Z,1528910534.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:14.408Z,1528910534.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:14.768Z,1528910534.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:14.798Z,1528910534.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:15.172Z,1528910535.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:15.206Z,1528910535.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:15.571Z,1528910535.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:15.589Z,1528910535.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:15.976Z,1528910535.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:15.993Z,1528910535.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:16.370Z,1528910536.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:16.388Z,1528910536.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:16.775Z,1528910536.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:16.793Z,1528910536.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:17.169Z,1528910537.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:17.187Z,1528910537.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:17.574Z,1528910537.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:17.592Z,1528910537.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:17.974Z,1528910537.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:17.992Z,1528910537.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:18.371Z,1528910538.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:18.396Z,1528910538.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:18.769Z,1528910538.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:18.788Z,1528910538.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:19.174Z,1528910539.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:19.191Z,1528910539.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:19.570Z,1528910539.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:19.587Z,1528910539.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:19.971Z,1528910539.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:19.989Z,1528910539.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:20.374Z,1528910540.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:20.391Z,1528910540.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:20.773Z,1528910540.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:20.791Z,1528910540.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:21.172Z,1528910541.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:21.190Z,1528910541.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:21.574Z,1528910541.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:21.592Z,1528910541.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:21.972Z,1528910541.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:21.990Z,1528910541.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:22.374Z,1528910542.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:22.392Z,1528910542.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:22.774Z,1528910542.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:22.792Z,1528910542.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:23.174Z,1528910543.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:23.191Z,1528910543.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:23.571Z,1528910543.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:23.590Z,1528910543.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:23.974Z,1528910543.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:23.992Z,1528910543.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:24.372Z,1528910544.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:24.389Z,1528910544.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:24.771Z,1528910544.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:24.790Z,1528910544.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:25.185Z,1528910545.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:25.203Z,1528910545.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:25.554Z,1528910545.554 [NAL9602](INFO): NAL9602 initialized
2018-06-13T17:22:25.581Z,1528910545.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:25.600Z,1528910545.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:25.973Z,1528910545.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:25.991Z,1528910545.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:26.385Z,1528910546.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:26.403Z,1528910546.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:26.785Z,1528910546.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:26.803Z,1528910546.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:27.178Z,1528910547.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:27.196Z,1528910547.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:27.577Z,1528910547.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:27.595Z,1528910547.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:27.971Z,1528910547.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:28.004Z,1528910548.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:28.372Z,1528910548.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:28.401Z,1528910548.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:28.771Z,1528910548.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:28.808Z,1528910548.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:29.178Z,1528910549.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:29.212Z,1528910549.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:29.588Z,1528910549.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:29.606Z,1528910549.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:29.992Z,1528910549.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:30.010Z,1528910550.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:30.371Z,1528910550.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:30.408Z,1528910550.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:30.767Z,1528910550.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:30.793Z,1528910550.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:31.171Z,1528910551.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:31.201Z,1528910551.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:31.568Z,1528910551.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:31.592Z,1528910551.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:31.975Z,1528910551.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:31.993Z,1528910551.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:32.385Z,1528910552.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:32.423Z,1528910552.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:32.785Z,1528910552.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:32.819Z,1528910552.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:33.181Z,1528910553.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:33.215Z,1528910553.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:33.574Z,1528910553.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:33.592Z,1528910553.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:33.974Z,1528910553.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:33.993Z,1528910553.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:34.370Z,1528910554.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:34.388Z,1528910554.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:34.774Z,1528910554.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:34.792Z,1528910554.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:35.186Z,1528910555.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:35.216Z,1528910555.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:35.585Z,1528910555.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:35.603Z,1528910555.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:35.985Z,1528910555.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:36.003Z,1528910556.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:36.371Z,1528910556.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:36.405Z,1528910556.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:36.773Z,1528910556.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:36.791Z,1528910556.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:37.178Z,1528910557.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:37.196Z,1528910557.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:37.577Z,1528910557.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:37.595Z,1528910557.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:37.974Z,1528910557.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:37.992Z,1528910557.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:38.385Z,1528910558.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:38.404Z,1528910558.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:38.782Z,1528910558.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:38.804Z,1528910558.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:39.182Z,1528910559.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:39.200Z,1528910559.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:39.578Z,1528910559.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:39.595Z,1528910559.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:39.975Z,1528910559.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:40.008Z,1528910560.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:40.373Z,1528910560.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:40.391Z,1528910560.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:40.778Z,1528910560.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:40.795Z,1528910560.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:41.182Z,1528910561.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:41.204Z,1528910561.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:41.582Z,1528910561.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:41.600Z,1528910561.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:41.986Z,1528910561.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:42.004Z,1528910562.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:42.377Z,1528910562.377 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:42.403Z,1528910562.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:42.773Z,1528910562.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:42.791Z,1528910562.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:43.178Z,1528910563.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:43.196Z,1528910563.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:43.578Z,1528910563.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:43.596Z,1528910563.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:43.973Z,1528910563.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:43.991Z,1528910563.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:44.385Z,1528910564.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:44.403Z,1528910564.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:44.785Z,1528910564.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:44.804Z,1528910564.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:45.183Z,1528910565.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:45.200Z,1528910565.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:45.578Z,1528910565.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:45.595Z,1528910565.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:45.977Z,1528910565.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:45.000Z,1528910566.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:46.374Z,1528910566.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:46.392Z,1528910566.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:46.781Z,1528910566.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:46.799Z,1528910566.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:47.185Z,1528910567.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:47.203Z,1528910567.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:47.204Z,1528910567.204 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 278
2018-06-13T17:22:47.204Z,1528910567.204 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:22:47.206Z,1528910567.206 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:47.206Z,1528910567.206 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 278
2018-06-13T17:22:47.206Z,1528910567.206 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:22:47.207Z,1528910567.207 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:47.208Z,1528910567.208 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 278
2018-06-13T17:22:47.208Z,1528910567.208 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:22:47.293Z,1528910567.293 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:22:47.293Z,1528910567.293 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:22:47.294Z,1528910567.294 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:22:47.587Z,1528910567.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:47.681Z,1528910567.681 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:22:47.681Z,1528910567.681 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 278
2018-06-13T17:22:47.682Z,1528910567.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:22:47.682Z,1528910567.682 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 278
2018-06-13T17:22:47.682Z,1528910567.682 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:22:47.682Z,1528910567.682 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 278
2018-06-13T17:22:47.990Z,1528910567.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:48.019Z,1528910568.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:22:48.019Z,1528910568.019 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:22:48.020Z,1528910568.020 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:22:48.020Z,1528910568.020 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:22:48.025Z,1528910568.025 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:22:48.025Z,1528910568.025 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:22:48.025Z,1528910568.025 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:22:48.026Z,1528910568.026 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:22:48.026Z,1528910568.026 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:22:48.367Z,1528910568.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:48.411Z,1528910568.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:22:48.412Z,1528910568.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:48.767Z,1528910568.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:48.807Z,1528910568.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:22:48.808Z,1528910568.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:49.171Z,1528910569.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:49.215Z,1528910569.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:22:49.216Z,1528910569.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:49.576Z,1528910569.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:49.608Z,1528910569.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:22:49.609Z,1528910569.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:49.967Z,1528910569.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:49.993Z,1528910569.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:22:49.994Z,1528910569.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:50.386Z,1528910570.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:50.422Z,1528910570.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:22:50.423Z,1528910570.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:50.782Z,1528910570.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:50.811Z,1528910570.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:22:50.812Z,1528910570.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:51.181Z,1528910571.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:51.209Z,1528910571.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:22:51.210Z,1528910571.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:51.572Z,1528910571.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:51.606Z,1528910571.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:22:51.607Z,1528910571.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:51.971Z,1528910571.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:51.989Z,1528910571.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:22:51.990Z,1528910571.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:52.372Z,1528910572.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:52.396Z,1528910572.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:22:52.413Z,1528910572.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:52.775Z,1528910572.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:52.792Z,1528910572.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:22:52.793Z,1528910572.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:53.186Z,1528910573.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:53.223Z,1528910573.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:22:53.223Z,1528910573.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:53.590Z,1528910573.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:53.622Z,1528910573.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:22:53.623Z,1528910573.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:53.985Z,1528910573.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:54.023Z,1528910574.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:22:54.024Z,1528910574.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:54.375Z,1528910574.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:54.393Z,1528910574.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:22:54.394Z,1528910574.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:54.771Z,1528910574.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:54.788Z,1528910574.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:22:54.789Z,1528910574.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:55.172Z,1528910575.172 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:55.209Z,1528910575.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:22:55.210Z,1528910575.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:55.567Z,1528910575.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:55.612Z,1528910575.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:22:55.612Z,1528910575.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:55.967Z,1528910575.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:55.985Z,1528910575.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:22:55.986Z,1528910575.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:56.390Z,1528910576.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:56.418Z,1528910576.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:22:56.419Z,1528910576.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:56.790Z,1528910576.790 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:56.818Z,1528910576.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:22:56.819Z,1528910576.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:57.185Z,1528910577.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:57.224Z,1528910577.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:22:57.225Z,1528910577.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:57.575Z,1528910577.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:57.592Z,1528910577.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:22:57.594Z,1528910577.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:57.974Z,1528910577.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:57.992Z,1528910577.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:22:57.993Z,1528910577.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:58.374Z,1528910578.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:58.393Z,1528910578.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:22:58.394Z,1528910578.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:58.774Z,1528910578.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:58.791Z,1528910578.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:22:58.792Z,1528910578.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:59.185Z,1528910579.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:59.219Z,1528910579.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:22:59.220Z,1528910579.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:59.581Z,1528910579.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:59.598Z,1528910579.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:22:59.599Z,1528910579.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:22:59.981Z,1528910579.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:22:59.998Z,1528910579.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:22:59.999Z,1528910579.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:00.375Z,1528910580.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:00.400Z,1528910580.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:23:00.402Z,1528910580.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:00.776Z,1528910580.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:00.793Z,1528910580.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:23:00.794Z,1528910580.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:01.176Z,1528910581.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:01.206Z,1528910581.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:23:01.207Z,1528910581.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:01.576Z,1528910581.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:01.594Z,1528910581.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:23:01.595Z,1528910581.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:01.973Z,1528910581.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:01.991Z,1528910581.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:23:01.992Z,1528910581.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:02.381Z,1528910582.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:02.403Z,1528910582.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:23:02.404Z,1528910582.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:02.786Z,1528910582.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:02.803Z,1528910582.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:23:02.804Z,1528910582.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:03.183Z,1528910583.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:03.208Z,1528910583.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:23:03.225Z,1528910583.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:03.581Z,1528910583.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:03.599Z,1528910583.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:23:03.600Z,1528910583.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:03.603Z,1528910583.603 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T17:23:03.603Z,1528910583.603 [Default:CheckIn:C.Wait] Stopped
2018-06-13T17:23:03.604Z,1528910583.604 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T17:23:03.604Z,1528910583.604 [Default:CheckIn:D] Running Loop=1
2018-06-13T17:23:03.982Z,1528910583.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:04.004Z,1528910584.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:23:04.005Z,1528910584.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:04.008Z,1528910584.008 [Default:CheckIn:D] Stopped
2018-06-13T17:23:04.008Z,1528910584.008 [Default:CheckIn:E] Running Loop=1
2018-06-13T17:23:07.095Z,1528910587.095 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:07.113Z,1528910587.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T17:23:07.114Z,1528910587.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:07.118Z,1528910587.118 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 835.842708 min 
2018-06-13T17:23:07.118Z,1528910587.118 [Default:CheckIn:E] Stopped
2018-06-13T17:23:07.118Z,1528910587.118 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T17:23:07.118Z,1528910587.118 [Default:CheckIn] Stopped
2018-06-13T17:23:07.118Z,1528910587.118 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T17:23:07.118Z,1528910587.118 [Default:CheckIn](INFO): Running loop #81
2018-06-13T17:23:07.118Z,1528910587.118 [Default:CheckIn] Running Loop=81
2018-06-13T17:23:07.119Z,1528910587.119 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T17:23:07.119Z,1528910587.119 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T17:23:07.246Z,1528910587.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:07.287Z,1528910587.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:07.657Z,1528910587.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:07.688Z,1528910587.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:08.061Z,1528910588.061 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:08.100Z,1528910588.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:08.453Z,1528910588.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:08.472Z,1528910588.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:08.848Z,1528910588.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:08.866Z,1528910588.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:09.247Z,1528910589.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:09.265Z,1528910589.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:09.648Z,1528910589.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:09.666Z,1528910589.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:10.048Z,1528910590.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:10.066Z,1528910590.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:10.452Z,1528910590.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:10.470Z,1528910590.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:10.857Z,1528910590.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:10.875Z,1528910590.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:11.255Z,1528910591.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:11.273Z,1528910591.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:11.646Z,1528910591.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:11.663Z,1528910591.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:12.049Z,1528910592.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:12.072Z,1528910592.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:12.449Z,1528910592.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:12.467Z,1528910592.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:12.845Z,1528910592.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:12.863Z,1528910592.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:13.254Z,1528910593.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:13.276Z,1528910593.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:13.657Z,1528910593.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:13.675Z,1528910593.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:14.055Z,1528910594.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:14.073Z,1528910594.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:14.449Z,1528910594.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:14.466Z,1528910594.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:14.848Z,1528910594.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:14.866Z,1528910594.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:15.246Z,1528910595.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:15.264Z,1528910595.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:15.648Z,1528910595.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:15.667Z,1528910595.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:16.050Z,1528910596.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:16.068Z,1528910596.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:16.454Z,1528910596.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:16.473Z,1528910596.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:16.854Z,1528910596.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:16.872Z,1528910596.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:17.254Z,1528910597.254 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:17.276Z,1528910597.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:17.646Z,1528910597.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:17.664Z,1528910597.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:18.047Z,1528910598.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:18.077Z,1528910598.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:18.450Z,1528910598.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:18.467Z,1528910598.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:18.846Z,1528910598.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:18.864Z,1528910598.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:19.258Z,1528910599.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:19.276Z,1528910599.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:19.658Z,1528910599.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:19.676Z,1528910599.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:20.059Z,1528910600.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:20.078Z,1528910600.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:20.447Z,1528910600.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:20.470Z,1528910600.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:20.847Z,1528910600.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:20.872Z,1528910600.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:21.246Z,1528910601.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:21.264Z,1528910601.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:21.647Z,1528910601.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:21.671Z,1528910601.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:22.047Z,1528910602.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:22.071Z,1528910602.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:22.458Z,1528910602.458 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:22.477Z,1528910602.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:22.858Z,1528910602.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:22.876Z,1528910602.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:23.258Z,1528910603.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:23.276Z,1528910603.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:23.646Z,1528910603.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:23.664Z,1528910603.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:24.043Z,1528910604.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:24.073Z,1528910604.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:24.447Z,1528910604.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:24.481Z,1528910604.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:24.843Z,1528910604.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:24.872Z,1528910604.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:25.259Z,1528910605.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:25.278Z,1528910605.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:25.664Z,1528910605.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:25.682Z,1528910605.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:26.060Z,1528910606.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:26.078Z,1528910606.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:26.443Z,1528910606.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:26.478Z,1528910606.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:26.843Z,1528910606.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:26.871Z,1528910606.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:27.243Z,1528910607.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:27.271Z,1528910607.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:27.644Z,1528910607.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:27.680Z,1528910607.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:28.043Z,1528910608.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:28.071Z,1528910608.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:28.464Z,1528910608.464 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:28.482Z,1528910608.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:28.863Z,1528910608.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:28.881Z,1528910608.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:29.259Z,1528910609.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:29.277Z,1528910609.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:29.643Z,1528910609.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:29.671Z,1528910609.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:30.043Z,1528910610.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:30.072Z,1528910610.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:30.448Z,1528910610.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:30.475Z,1528910610.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:30.839Z,1528910610.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:30.876Z,1528910610.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:31.259Z,1528910611.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:31.281Z,1528910611.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:31.663Z,1528910611.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:31.682Z,1528910611.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:32.060Z,1528910612.060 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:32.079Z,1528910612.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:32.444Z,1528910612.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:32.479Z,1528910612.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:32.843Z,1528910612.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:32.878Z,1528910612.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:33.243Z,1528910613.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:33.282Z,1528910613.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:33.644Z,1528910613.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:33.671Z,1528910613.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:34.043Z,1528910614.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:34.077Z,1528910614.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:34.459Z,1528910614.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:34.493Z,1528910614.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:34.858Z,1528910614.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:34.892Z,1528910614.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:35.258Z,1528910615.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:35.276Z,1528910615.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:35.646Z,1528910615.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:35.664Z,1528910615.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:36.048Z,1528910616.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:36.068Z,1528910616.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:36.448Z,1528910616.448 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:36.467Z,1528910616.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:36.846Z,1528910616.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:36.864Z,1528910616.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:37.253Z,1528910617.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:37.271Z,1528910617.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:37.658Z,1528910617.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:37.676Z,1528910617.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:38.059Z,1528910618.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:38.077Z,1528910618.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:38.447Z,1528910618.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:38.471Z,1528910618.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:38.847Z,1528910618.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:38.871Z,1528910618.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:39.246Z,1528910619.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:39.265Z,1528910619.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:39.647Z,1528910619.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:39.671Z,1528910619.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:40.053Z,1528910620.053 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:40.071Z,1528910620.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:40.459Z,1528910620.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:40.477Z,1528910620.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:40.859Z,1528910620.859 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:40.877Z,1528910620.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:41.259Z,1528910621.259 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:41.278Z,1528910621.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:41.647Z,1528910621.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:41.664Z,1528910621.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:42.052Z,1528910622.052 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:42.070Z,1528910622.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:42.450Z,1528910622.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:42.468Z,1528910622.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:42.846Z,1528910622.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:42.864Z,1528910622.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:43.256Z,1528910623.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:43.274Z,1528910623.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:43.658Z,1528910623.658 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:43.676Z,1528910623.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:44.059Z,1528910624.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:44.078Z,1528910624.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:44.447Z,1528910624.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:44.470Z,1528910624.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:44.847Z,1528910624.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:44.877Z,1528910624.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:45.246Z,1528910625.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:45.264Z,1528910625.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:45.647Z,1528910625.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:45.671Z,1528910625.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:46.048Z,1528910626.048 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:46.072Z,1528910626.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:46.459Z,1528910626.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:46.477Z,1528910626.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:46.858Z,1528910626.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:46.880Z,1528910626.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:47.258Z,1528910627.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:47.280Z,1528910627.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:47.646Z,1528910627.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:47.663Z,1528910627.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:48.049Z,1528910628.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:48.066Z,1528910628.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:48.449Z,1528910628.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:48.466Z,1528910628.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:48.846Z,1528910628.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:48.864Z,1528910628.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:49.258Z,1528910629.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:49.276Z,1528910629.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:49.661Z,1528910629.661 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:49.680Z,1528910629.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:50.058Z,1528910630.058 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:50.076Z,1528910630.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:50.447Z,1528910630.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:50.469Z,1528910630.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:50.848Z,1528910630.848 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:50.866Z,1528910630.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:51.245Z,1528910631.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:51.268Z,1528910631.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:51.651Z,1528910631.651 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:51.668Z,1528910631.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:52.047Z,1528910632.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:52.070Z,1528910632.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:52.459Z,1528910632.459 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:52.477Z,1528910632.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:52.858Z,1528910632.858 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:52.880Z,1528910632.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:53.255Z,1528910633.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:53.280Z,1528910633.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:53.646Z,1528910633.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:53.664Z,1528910633.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:54.047Z,1528910634.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:54.070Z,1528910634.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:54.454Z,1528910634.454 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:54.471Z,1528910634.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:54.845Z,1528910634.845 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:54.863Z,1528910634.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:55.258Z,1528910635.258 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:55.276Z,1528910635.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:55.657Z,1528910635.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:55.675Z,1528910635.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:56.059Z,1528910636.059 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:56.080Z,1528910636.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:56.447Z,1528910636.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:56.471Z,1528910636.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:56.847Z,1528910636.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:56.879Z,1528910636.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:57.245Z,1528910637.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:57.263Z,1528910637.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:57.649Z,1528910637.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:57.667Z,1528910637.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:58.043Z,1528910638.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:58.080Z,1528910638.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:58.461Z,1528910638.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:58.479Z,1528910638.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:58.863Z,1528910638.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:58.881Z,1528910638.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:59.260Z,1528910639.260 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:59.280Z,1528910639.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:23:59.639Z,1528910639.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:23:59.676Z,1528910639.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:00.039Z,1528910640.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:00.075Z,1528910640.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:00.439Z,1528910640.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:00.476Z,1528910640.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:00.843Z,1528910640.843 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:00.881Z,1528910640.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:01.264Z,1528910641.264 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:01.282Z,1528910641.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:01.663Z,1528910641.663 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:01.688Z,1528910641.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:02.056Z,1528910642.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:02.087Z,1528910642.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:02.443Z,1528910642.443 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:02.480Z,1528910642.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:02.839Z,1528910642.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:02.856Z,1528910642.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:03.244Z,1528910643.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:03.282Z,1528910643.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:03.648Z,1528910643.648 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:03.682Z,1528910643.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:04.046Z,1528910644.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:04.064Z,1528910644.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:04.461Z,1528910644.461 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:04.490Z,1528910644.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:04.861Z,1528910644.861 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:04.888Z,1528910644.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:05.257Z,1528910645.257 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:05.292Z,1528910645.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:05.647Z,1528910645.647 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:05.665Z,1528910645.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:06.047Z,1528910646.047 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:06.065Z,1528910646.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:06.447Z,1528910646.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:06.465Z,1528910646.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:06.847Z,1528910646.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:06.872Z,1528910646.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:07.261Z,1528910647.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:07.299Z,1528910647.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:07.657Z,1528910647.657 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:07.675Z,1528910647.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:10.773Z,1528910650.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:10.801Z,1528910650.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:10.919Z,1528910650.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:10.949Z,1528910650.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:11.315Z,1528910651.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:11.360Z,1528910651.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:11.716Z,1528910651.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:11.750Z,1528910651.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:12.115Z,1528910652.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:12.132Z,1528910652.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:12.525Z,1528910652.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:12.559Z,1528910652.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:12.929Z,1528910652.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:12.957Z,1528910652.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:13.326Z,1528910653.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:13.359Z,1528910653.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:13.715Z,1528910653.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:13.756Z,1528910653.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:14.119Z,1528910654.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:14.153Z,1528910654.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:14.520Z,1528910654.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:14.537Z,1528910654.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:14.918Z,1528910654.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:14.935Z,1528910654.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:15.329Z,1528910655.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:15.364Z,1528910655.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:15.729Z,1528910655.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:15.762Z,1528910655.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:16.129Z,1528910656.129 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:16.163Z,1528910656.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:16.518Z,1528910656.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:16.536Z,1528910656.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:16.918Z,1528910656.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:16.936Z,1528910656.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:17.318Z,1528910657.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:17.336Z,1528910657.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:17.720Z,1528910657.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:17.738Z,1528910657.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:18.115Z,1528910658.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:18.133Z,1528910658.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:18.529Z,1528910658.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:18.563Z,1528910658.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:18.933Z,1528910658.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:18.960Z,1528910658.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:19.329Z,1528910659.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:19.366Z,1528910659.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:19.718Z,1528910659.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:19.737Z,1528910659.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:20.119Z,1528910660.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:20.136Z,1528910660.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:20.519Z,1528910660.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:20.544Z,1528910660.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:20.919Z,1528910660.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:20.944Z,1528910660.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:21.330Z,1528910661.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:21.348Z,1528910661.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:21.730Z,1528910661.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:21.747Z,1528910661.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:22.126Z,1528910662.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:22.144Z,1528910662.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:22.521Z,1528910662.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:22.540Z,1528910662.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:22.920Z,1528910662.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:22.938Z,1528910662.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:23.322Z,1528910663.322 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:23.340Z,1528910663.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:23.723Z,1528910663.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:23.741Z,1528910663.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:24.120Z,1528910664.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:24.138Z,1528910664.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:24.522Z,1528910664.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:24.548Z,1528910664.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:24.929Z,1528910664.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:24.948Z,1528910664.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:25.326Z,1528910665.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:25.348Z,1528910665.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:25.722Z,1528910665.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:25.745Z,1528910665.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:26.122Z,1528910666.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:26.140Z,1528910666.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:26.525Z,1528910666.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:26.543Z,1528910666.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:26.923Z,1528910666.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:26.941Z,1528910666.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:27.327Z,1528910667.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:27.346Z,1528910667.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:27.730Z,1528910667.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:27.748Z,1528910667.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:28.127Z,1528910668.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:28.144Z,1528910668.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:28.523Z,1528910668.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:28.541Z,1528910668.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:28.920Z,1528910668.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:28.939Z,1528910668.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:29.319Z,1528910669.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:29.350Z,1528910669.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:29.722Z,1528910669.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:29.742Z,1528910669.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:30.119Z,1528910670.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:30.142Z,1528910670.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:30.530Z,1528910670.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:30.549Z,1528910670.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:30.931Z,1528910670.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:30.949Z,1528910670.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:31.330Z,1528910671.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:31.348Z,1528910671.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:31.719Z,1528910671.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:31.743Z,1528910671.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:32.122Z,1528910672.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:32.139Z,1528910672.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:32.520Z,1528910672.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:32.554Z,1528910672.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:32.911Z,1528910672.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:32.949Z,1528910672.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:33.336Z,1528910673.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:33.354Z,1528910673.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:33.735Z,1528910673.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:33.753Z,1528910673.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:34.131Z,1528910674.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:34.149Z,1528910674.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:34.511Z,1528910674.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:34.553Z,1528910674.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:34.915Z,1528910674.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:34.942Z,1528910674.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:35.315Z,1528910675.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:35.343Z,1528910675.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:35.715Z,1528910675.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:35.743Z,1528910675.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:36.115Z,1528910676.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:36.148Z,1528910676.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:36.535Z,1528910676.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:36.554Z,1528910676.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:36.932Z,1528910676.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:36.950Z,1528910676.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:37.336Z,1528910677.336 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:37.353Z,1528910677.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:37.715Z,1528910677.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:37.757Z,1528910677.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:38.115Z,1528910678.115 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:38.143Z,1528910678.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:38.515Z,1528910678.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:38.542Z,1528910678.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:38.915Z,1528910678.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:38.943Z,1528910678.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:39.337Z,1528910679.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:39.355Z,1528910679.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:39.735Z,1528910679.735 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:39.753Z,1528910679.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:40.131Z,1528910680.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:40.149Z,1528910680.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:40.511Z,1528910680.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:40.553Z,1528910680.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:40.915Z,1528910680.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:40.942Z,1528910680.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:41.315Z,1528910681.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:41.343Z,1528910681.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:41.715Z,1528910681.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:41.743Z,1528910681.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:42.119Z,1528910682.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:42.146Z,1528910682.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:42.531Z,1528910682.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:42.550Z,1528910682.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:42.932Z,1528910682.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:42.950Z,1528910682.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:43.335Z,1528910683.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:43.354Z,1528910683.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:43.715Z,1528910683.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:43.743Z,1528910683.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:44.116Z,1528910684.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:44.154Z,1528910684.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:44.516Z,1528910684.516 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:44.553Z,1528910684.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:44.915Z,1528910684.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:44.949Z,1528910684.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:45.329Z,1528910685.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:45.359Z,1528910685.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:45.729Z,1528910685.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:45.762Z,1528910685.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:46.130Z,1528910686.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:46.162Z,1528910686.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:46.518Z,1528910686.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:46.536Z,1528910686.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:46.918Z,1528910686.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:46.940Z,1528910686.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:47.318Z,1528910687.318 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:47.336Z,1528910687.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:47.718Z,1528910687.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:47.736Z,1528910687.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:48.118Z,1528910688.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:48.136Z,1528910688.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:48.529Z,1528910688.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:48.564Z,1528910688.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:48.933Z,1528910688.933 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:48.967Z,1528910688.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:49.326Z,1528910689.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:49.343Z,1528910689.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:49.720Z,1528910689.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:49.738Z,1528910689.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:50.120Z,1528910690.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:50.138Z,1528910690.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:50.520Z,1528910690.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:50.538Z,1528910690.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:50.920Z,1528910690.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:50.938Z,1528910690.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:51.328Z,1528910691.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:51.346Z,1528910691.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:51.729Z,1528910691.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:51.747Z,1528910691.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:52.126Z,1528910692.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:52.143Z,1528910692.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:52.518Z,1528910692.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:52.535Z,1528910692.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:52.920Z,1528910692.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:52.938Z,1528910692.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:53.321Z,1528910693.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:53.339Z,1528910693.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:53.723Z,1528910693.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:53.741Z,1528910693.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:54.119Z,1528910694.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:54.153Z,1528910694.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:54.530Z,1528910694.530 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:54.548Z,1528910694.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:54.931Z,1528910694.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:54.949Z,1528910694.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:55.330Z,1528910695.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:55.352Z,1528910695.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:55.719Z,1528910695.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:55.749Z,1528910695.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:56.122Z,1528910696.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:56.140Z,1528910696.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:56.526Z,1528910696.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:56.544Z,1528910696.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:56.919Z,1528910696.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:56.944Z,1528910696.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:57.331Z,1528910697.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:57.349Z,1528910697.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:57.731Z,1528910697.731 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:57.749Z,1528910697.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:58.131Z,1528910698.131 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:58.149Z,1528910698.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:58.522Z,1528910698.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:58.540Z,1528910698.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:58.919Z,1528910698.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:58.948Z,1528910698.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:59.319Z,1528910699.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:59.344Z,1528910699.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:24:59.722Z,1528910699.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:24:59.741Z,1528910699.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:00.119Z,1528910700.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:00.142Z,1528910700.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:00.531Z,1528910700.531 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:00.550Z,1528910700.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:00.934Z,1528910700.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:00.953Z,1528910700.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:01.331Z,1528910701.331 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:01.350Z,1528910701.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:01.719Z,1528910701.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:01.743Z,1528910701.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:02.123Z,1528910702.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:02.141Z,1528910702.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:02.519Z,1528910702.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:02.553Z,1528910702.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:02.915Z,1528910702.915 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:02.952Z,1528910702.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:03.334Z,1528910703.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:03.352Z,1528910703.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:03.738Z,1528910703.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:03.760Z,1528910703.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:04.135Z,1528910704.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:04.153Z,1528910704.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:07.236Z,1528910707.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:07.259Z,1528910707.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:07.389Z,1528910707.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:07.407Z,1528910707.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:07.794Z,1528910707.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:07.812Z,1528910707.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:08.193Z,1528910708.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:08.212Z,1528910708.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:08.594Z,1528910708.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:08.616Z,1528910708.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:08.979Z,1528910708.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:09.016Z,1528910709.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:09.383Z,1528910709.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:09.402Z,1528910709.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:09.783Z,1528910709.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:09.820Z,1528910709.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:10.183Z,1528910710.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:10.220Z,1528910710.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:10.597Z,1528910710.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:10.615Z,1528910710.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:10.994Z,1528910710.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:11.020Z,1528910711.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:11.395Z,1528910711.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:11.420Z,1528910711.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:11.784Z,1528910711.784 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:11.802Z,1528910711.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:12.183Z,1528910712.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:12.214Z,1528910712.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:12.576Z,1528910712.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:12.607Z,1528910712.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:12.976Z,1528910712.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:13.010Z,1528910713.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:13.396Z,1528910713.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:13.415Z,1528910713.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:13.801Z,1528910713.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:13.819Z,1528910713.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:14.198Z,1528910714.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:14.216Z,1528910714.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:14.579Z,1528910714.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:14.616Z,1528910714.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:14.979Z,1528910714.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:15.018Z,1528910715.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:15.375Z,1528910715.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:15.415Z,1528910715.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:15.779Z,1528910715.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:15.808Z,1528910715.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:16.179Z,1528910716.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:16.208Z,1528910716.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:16.600Z,1528910716.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:16.619Z,1528910716.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:16.000Z,1528910717.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:17.018Z,1528910717.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:17.395Z,1528910717.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:17.415Z,1528910717.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:17.775Z,1528910717.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:17.816Z,1528910717.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:18.180Z,1528910718.180 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:18.223Z,1528910718.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:18.580Z,1528910718.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:18.622Z,1528910718.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:18.975Z,1528910718.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:19.005Z,1528910719.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:19.385Z,1528910719.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:19.425Z,1528910719.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:19.794Z,1528910719.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:19.831Z,1528910719.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:20.194Z,1528910720.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:20.224Z,1528910720.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:20.579Z,1528910720.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:20.613Z,1528910720.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:20.979Z,1528910720.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:20.998Z,1528910720.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:21.379Z,1528910721.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:21.398Z,1528910721.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:21.783Z,1528910721.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:21.801Z,1528910721.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:22.182Z,1528910722.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:22.202Z,1528910722.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:22.589Z,1528910722.589 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:22.608Z,1528910722.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:22.993Z,1528910722.993 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:23.032Z,1528910723.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:23.389Z,1528910723.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:23.408Z,1528910723.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:23.782Z,1528910723.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:23.800Z,1528910723.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:24.183Z,1528910724.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:24.202Z,1528910724.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:24.584Z,1528910724.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:24.603Z,1528910724.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:24.983Z,1528910724.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:25.001Z,1528910725.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:25.394Z,1528910725.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:25.416Z,1528910725.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:25.793Z,1528910725.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:25.816Z,1528910725.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:26.191Z,1528910726.191 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:26.210Z,1528910726.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:26.583Z,1528910726.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:26.606Z,1528910726.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:26.986Z,1528910726.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:27.004Z,1528910727.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:27.382Z,1528910727.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:27.400Z,1528910727.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:27.785Z,1528910727.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:27.804Z,1528910727.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:28.184Z,1528910728.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:28.203Z,1528910728.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:28.590Z,1528910728.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:28.609Z,1528910728.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:28.994Z,1528910728.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:29.013Z,1528910729.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:29.390Z,1528910729.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:29.416Z,1528910729.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:29.789Z,1528910729.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:29.808Z,1528910729.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:30.183Z,1528910730.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:30.206Z,1528910730.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:30.583Z,1528910730.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:30.616Z,1528910730.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:30.985Z,1528910730.985 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:31.004Z,1528910731.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:31.390Z,1528910731.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:31.416Z,1528910731.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:31.794Z,1528910731.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:31.816Z,1528910731.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:32.190Z,1528910732.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:32.209Z,1528910732.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:32.583Z,1528910732.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:32.617Z,1528910732.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:32.983Z,1528910732.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:33.007Z,1528910733.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:33.381Z,1528910733.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:33.400Z,1528910733.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:33.786Z,1528910733.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:33.805Z,1528910733.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:34.183Z,1528910734.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:34.208Z,1528910734.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:34.595Z,1528910734.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:34.614Z,1528910734.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:34.994Z,1528910734.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:35.016Z,1528910735.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:35.394Z,1528910735.394 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:35.413Z,1528910735.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:35.782Z,1528910735.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:35.800Z,1528910735.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:36.185Z,1528910736.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:36.203Z,1528910736.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:36.586Z,1528910736.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:36.605Z,1528910736.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:36.981Z,1528910736.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:36.000Z,1528910737.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:37.395Z,1528910737.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:37.414Z,1528910737.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:37.799Z,1528910737.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:37.817Z,1528910737.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:38.196Z,1528910738.196 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:38.220Z,1528910738.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:38.584Z,1528910738.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:38.608Z,1528910738.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:38.983Z,1528910738.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:39.008Z,1528910739.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:39.375Z,1528910739.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:39.414Z,1528910739.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:39.780Z,1528910739.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:39.821Z,1528910739.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:40.179Z,1528910740.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:40.208Z,1528910740.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:40.595Z,1528910740.595 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:40.620Z,1528910740.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:41.000Z,1528910741.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:41.018Z,1528910741.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:41.400Z,1528910741.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:41.419Z,1528910741.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:41.775Z,1528910741.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:41.819Z,1528910741.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:42.179Z,1528910742.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:42.216Z,1528910742.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:42.580Z,1528910742.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:42.611Z,1528910742.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:42.975Z,1528910742.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:43.010Z,1528910743.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:43.398Z,1528910743.398 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:43.416Z,1528910743.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:43.798Z,1528910743.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:43.831Z,1528910743.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:44.198Z,1528910744.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:44.216Z,1528910744.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:44.579Z,1528910744.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:44.607Z,1528910744.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:44.979Z,1528910744.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:45.008Z,1528910745.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:45.379Z,1528910745.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:45.409Z,1528910745.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:45.780Z,1528910745.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:45.808Z,1528910745.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:46.183Z,1528910746.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:46.220Z,1528910746.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:46.596Z,1528910746.596 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:46.615Z,1528910746.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:46.000Z,1528910747.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:47.018Z,1528910747.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:47.395Z,1528910747.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:47.415Z,1528910747.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:47.775Z,1528910747.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:47.816Z,1528910747.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:48.176Z,1528910748.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:48.213Z,1528910748.213 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:48.213Z,1528910748.213 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 279
2018-06-13T17:25:48.213Z,1528910748.213 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:25:48.215Z,1528910748.215 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:48.215Z,1528910748.215 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 279
2018-06-13T17:25:48.215Z,1528910748.215 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:25:48.222Z,1528910748.222 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:48.222Z,1528910748.222 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 279
2018-06-13T17:25:48.222Z,1528910748.222 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:25:48.293Z,1528910748.293 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:25:48.293Z,1528910748.293 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:25:48.294Z,1528910748.294 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:25:48.579Z,1528910748.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:48.689Z,1528910748.689 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:25:48.689Z,1528910748.689 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 279
2018-06-13T17:25:48.690Z,1528910748.690 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:25:48.690Z,1528910748.690 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 279
2018-06-13T17:25:48.690Z,1528910748.690 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:25:48.690Z,1528910748.690 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 279
2018-06-13T17:25:48.979Z,1528910748.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:48.996Z,1528910748.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:25:48.996Z,1528910748.996 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:25:48.996Z,1528910748.996 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:25:49.013Z,1528910749.013 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:25:49.013Z,1528910749.013 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:25:49.014Z,1528910749.014 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:25:49.014Z,1528910749.014 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:25:49.014Z,1528910749.014 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:25:49.015Z,1528910749.015 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:25:49.393Z,1528910749.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:49.428Z,1528910749.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:25:49.434Z,1528910749.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:49.798Z,1528910749.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:49.831Z,1528910749.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:25:49.832Z,1528910749.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:50.199Z,1528910750.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:50.231Z,1528910750.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:25:50.232Z,1528910750.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:50.584Z,1528910750.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:50.604Z,1528910750.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:25:50.605Z,1528910750.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:50.982Z,1528910750.982 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:51.000Z,1528910751.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:25:51.002Z,1528910751.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:51.382Z,1528910751.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:51.400Z,1528910751.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:25:51.401Z,1528910751.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:51.785Z,1528910751.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:51.809Z,1528910751.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:25:51.810Z,1528910751.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:52.185Z,1528910752.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:52.204Z,1528910752.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:25:52.205Z,1528910752.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:52.590Z,1528910752.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:52.608Z,1528910752.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:25:52.609Z,1528910752.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:52.994Z,1528910752.994 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:53.016Z,1528910753.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:25:53.029Z,1528910753.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:53.390Z,1528910753.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:53.409Z,1528910753.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:25:53.410Z,1528910753.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:53.782Z,1528910753.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:53.800Z,1528910753.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:25:53.801Z,1528910753.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:54.183Z,1528910754.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:54.214Z,1528910754.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:25:54.215Z,1528910754.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:54.585Z,1528910754.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:54.604Z,1528910754.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:25:54.605Z,1528910754.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:54.975Z,1528910754.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:55.004Z,1528910755.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:25:55.006Z,1528910755.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:55.391Z,1528910755.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:55.410Z,1528910755.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:25:55.411Z,1528910755.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:55.795Z,1528910755.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:55.814Z,1528910755.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:25:55.815Z,1528910755.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:56.195Z,1528910756.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:56.216Z,1528910756.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:25:56.218Z,1528910756.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:56.579Z,1528910756.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:56.615Z,1528910756.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:25:56.616Z,1528910756.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:56.979Z,1528910756.979 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:57.016Z,1528910757.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:25:57.017Z,1528910757.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:57.375Z,1528910757.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:57.405Z,1528910757.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:25:57.406Z,1528910757.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:57.776Z,1528910757.776 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:57.808Z,1528910757.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:25:57.809Z,1528910757.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:58.178Z,1528910758.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:58.206Z,1528910758.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:25:58.207Z,1528910758.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:58.600Z,1528910758.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:58.618Z,1528910758.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:25:58.619Z,1528910758.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:58.000Z,1528910759.000 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:59.017Z,1528910759.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:25:59.018Z,1528910759.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:59.395Z,1528910759.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:59.416Z,1528910759.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:25:59.416Z,1528910759.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:25:59.775Z,1528910759.775 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:25:59.810Z,1528910759.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:25:59.811Z,1528910759.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:00.175Z,1528910760.175 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:00.212Z,1528910760.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:26:00.213Z,1528910760.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:00.575Z,1528910760.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:00.605Z,1528910760.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:26:00.606Z,1528910760.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:00.975Z,1528910760.975 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:00.992Z,1528910760.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:26:01.005Z,1528910761.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:01.389Z,1528910761.389 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:01.417Z,1528910761.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:26:01.418Z,1528910761.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:01.794Z,1528910761.794 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:01.827Z,1528910761.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:26:01.828Z,1528910761.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:02.189Z,1528910762.189 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:02.223Z,1528910762.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:26:02.224Z,1528910762.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:02.584Z,1528910762.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:02.602Z,1528910762.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:26:02.603Z,1528910762.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:02.981Z,1528910762.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:02.999Z,1528910762.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:26:02.000Z,1528910763.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:03.393Z,1528910763.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:03.427Z,1528910763.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:26:03.428Z,1528910763.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:03.798Z,1528910763.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:03.832Z,1528910763.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:26:03.837Z,1528910763.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:04.198Z,1528910764.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:04.215Z,1528910764.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:26:04.216Z,1528910764.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:04.586Z,1528910764.586 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:04.604Z,1528910764.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:26:04.605Z,1528910764.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:04.986Z,1528910764.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:05.004Z,1528910765.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:26:05.005Z,1528910765.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:05.388Z,1528910765.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:05.405Z,1528910765.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:26:05.406Z,1528910765.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:05.785Z,1528910765.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:05.803Z,1528910765.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:26:05.804Z,1528910765.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:06.185Z,1528910766.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:06.207Z,1528910766.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:26:06.208Z,1528910766.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:06.594Z,1528910766.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:06.612Z,1528910766.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:26:06.613Z,1528910766.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:06.998Z,1528910766.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:07.015Z,1528910767.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:26:07.016Z,1528910767.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:07.393Z,1528910767.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:07.412Z,1528910767.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:26:07.413Z,1528910767.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:07.787Z,1528910767.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:07.805Z,1528910767.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:26:07.806Z,1528910767.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:10.890Z,1528910770.890 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:10.908Z,1528910770.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:11.046Z,1528910771.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:11.091Z,1528910771.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:11.453Z,1528910771.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:11.490Z,1528910771.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:11.857Z,1528910771.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:11.892Z,1528910771.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:12.253Z,1528910772.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:12.287Z,1528910772.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:12.641Z,1528910772.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:12.658Z,1528910772.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:13.041Z,1528910773.041 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:13.059Z,1528910773.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:13.442Z,1528910773.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:13.460Z,1528910773.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:13.842Z,1528910773.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:13.864Z,1528910773.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:14.242Z,1528910774.242 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:14.260Z,1528910774.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:14.646Z,1528910774.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:14.664Z,1528910774.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:15.049Z,1528910775.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:15.067Z,1528910775.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:15.453Z,1528910775.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:15.471Z,1528910775.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:15.844Z,1528910775.844 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:15.862Z,1528910775.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:16.244Z,1528910776.244 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:16.262Z,1528910776.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:16.643Z,1528910776.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:16.660Z,1528910776.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:17.044Z,1528910777.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:17.062Z,1528910777.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:17.453Z,1528910777.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:17.471Z,1528910777.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:17.853Z,1528910777.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:17.871Z,1528910777.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:18.246Z,1528910778.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:18.268Z,1528910778.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:18.641Z,1528910778.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:18.659Z,1528910778.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:19.042Z,1528910779.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:19.060Z,1528910779.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:19.441Z,1528910779.441 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:19.459Z,1528910779.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:19.842Z,1528910779.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:19.859Z,1528910779.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:20.243Z,1528910780.243 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:20.260Z,1528910780.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:20.649Z,1528910780.649 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:20.667Z,1528910780.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:21.049Z,1528910781.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:21.067Z,1528910781.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:21.450Z,1528910781.450 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:21.476Z,1528910781.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:21.839Z,1528910781.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:21.862Z,1528910781.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:22.245Z,1528910782.245 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:22.263Z,1528910782.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:22.643Z,1528910782.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:22.661Z,1528910782.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:23.039Z,1528910783.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:23.065Z,1528910783.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:23.451Z,1528910783.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:23.469Z,1528910783.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:23.855Z,1528910783.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:23.880Z,1528910783.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:24.256Z,1528910784.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:24.274Z,1528910784.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:24.641Z,1528910784.641 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:24.659Z,1528910784.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:25.043Z,1528910785.043 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:25.062Z,1528910785.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:25.439Z,1528910785.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:25.469Z,1528910785.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:25.835Z,1528910785.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:25.876Z,1528910785.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:26.235Z,1528910786.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:26.265Z,1528910786.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:26.659Z,1528910786.659 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:26.676Z,1528910786.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:27.056Z,1528910787.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:27.080Z,1528910787.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:27.456Z,1528910787.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:27.474Z,1528910787.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:27.836Z,1528910787.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:27.872Z,1528910787.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:28.236Z,1528910788.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:28.268Z,1528910788.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:28.645Z,1528910788.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:28.663Z,1528910788.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:29.036Z,1528910789.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:29.078Z,1528910789.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:29.452Z,1528910789.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:29.470Z,1528910789.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:29.857Z,1528910789.857 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:29.875Z,1528910789.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:30.252Z,1528910790.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:30.270Z,1528910790.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:30.635Z,1528910790.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:30.666Z,1528910790.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:31.035Z,1528910791.035 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:31.066Z,1528910791.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:31.435Z,1528910791.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:31.464Z,1528910791.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:31.835Z,1528910791.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:31.863Z,1528910791.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:32.235Z,1528910792.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:32.272Z,1528910792.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:32.652Z,1528910792.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:32.676Z,1528910792.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:33.057Z,1528910793.057 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:33.081Z,1528910793.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:33.457Z,1528910793.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:33.475Z,1528910793.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:33.836Z,1528910793.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:33.873Z,1528910793.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:34.235Z,1528910794.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:34.279Z,1528910794.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:34.636Z,1528910794.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:34.670Z,1528910794.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:35.039Z,1528910795.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:35.067Z,1528910795.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:35.457Z,1528910795.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:35.475Z,1528910795.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:35.854Z,1528910795.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:35.872Z,1528910795.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:36.256Z,1528910796.256 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:36.274Z,1528910796.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:36.632Z,1528910796.632 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:36.672Z,1528910796.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:37.036Z,1528910797.036 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:37.069Z,1528910797.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:37.435Z,1528910797.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:37.464Z,1528910797.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:37.835Z,1528910797.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:37.873Z,1528910797.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:38.231Z,1528910798.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:38.250Z,1528910798.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:38.650Z,1528910798.650 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:38.678Z,1528910798.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:39.049Z,1528910799.049 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:39.084Z,1528910799.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:39.444Z,1528910799.444 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:39.478Z,1528910799.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:39.839Z,1528910799.839 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:39.857Z,1528910799.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:40.237Z,1528910800.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:40.255Z,1528910800.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:40.636Z,1528910800.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:40.653Z,1528910800.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:41.038Z,1528910801.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:41.056Z,1528910801.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:41.449Z,1528910801.449 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:41.483Z,1528910801.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:41.849Z,1528910801.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:41.867Z,1528910801.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:42.250Z,1528910802.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:42.267Z,1528910802.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:42.640Z,1528910802.640 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:42.667Z,1528910802.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:43.038Z,1528910803.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:43.056Z,1528910803.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:43.447Z,1528910803.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:43.464Z,1528910803.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:43.846Z,1528910803.846 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:43.868Z,1528910803.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:44.247Z,1528910804.247 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:44.265Z,1528910804.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:44.642Z,1528910804.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:44.659Z,1528910804.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:45.044Z,1528910805.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:45.062Z,1528910805.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:45.447Z,1528910805.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:45.466Z,1528910805.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:45.849Z,1528910805.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:45.867Z,1528910805.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:46.246Z,1528910806.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:46.272Z,1528910806.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:46.646Z,1528910806.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:46.664Z,1528910806.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:47.032Z,1528910807.032 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:47.067Z,1528910807.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:47.447Z,1528910807.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:47.466Z,1528910807.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:47.847Z,1528910807.847 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:47.865Z,1528910807.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:48.253Z,1528910808.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:48.271Z,1528910808.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:48.642Z,1528910808.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:48.660Z,1528910808.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:49.038Z,1528910809.038 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:49.056Z,1528910809.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:49.446Z,1528910809.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:49.465Z,1528910809.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:49.853Z,1528910809.853 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:49.871Z,1528910809.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:50.249Z,1528910810.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:50.267Z,1528910810.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:50.642Z,1528910810.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:50.660Z,1528910810.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:51.039Z,1528910811.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:51.071Z,1528910811.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:51.453Z,1528910811.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:51.471Z,1528910811.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:51.854Z,1528910811.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:51.871Z,1528910811.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:52.248Z,1528910812.248 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:52.266Z,1528910812.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:52.639Z,1528910812.639 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:52.657Z,1528910812.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:53.046Z,1528910813.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:53.063Z,1528910813.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:53.453Z,1528910813.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:53.471Z,1528910813.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:53.849Z,1528910813.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:53.867Z,1528910813.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:54.246Z,1528910814.246 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:54.272Z,1528910814.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:54.644Z,1528910814.644 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:54.662Z,1528910814.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:55.042Z,1528910815.042 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:55.060Z,1528910815.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:55.446Z,1528910815.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:55.464Z,1528910815.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:55.849Z,1528910815.849 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:55.868Z,1528910815.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:56.249Z,1528910816.249 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:56.267Z,1528910816.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:56.645Z,1528910816.645 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:56.663Z,1528910816.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:57.040Z,1528910817.040 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:57.066Z,1528910817.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:57.451Z,1528910817.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:57.469Z,1528910817.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:57.851Z,1528910817.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:57.868Z,1528910817.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:58.250Z,1528910818.250 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:58.267Z,1528910818.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:58.646Z,1528910818.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:58.664Z,1528910818.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:59.039Z,1528910819.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:59.063Z,1528910819.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:59.452Z,1528910819.452 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:59.470Z,1528910819.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:26:59.851Z,1528910819.851 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:26:59.869Z,1528910819.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:00.253Z,1528910820.253 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:00.271Z,1528910820.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:00.642Z,1528910820.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:00.660Z,1528910820.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:01.046Z,1528910821.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:01.065Z,1528910821.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:01.451Z,1528910821.451 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:01.468Z,1528910821.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:01.854Z,1528910821.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:01.872Z,1528910821.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:02.251Z,1528910822.251 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:02.269Z,1528910822.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:02.643Z,1528910822.643 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:02.675Z,1528910822.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:03.044Z,1528910823.044 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:03.063Z,1528910823.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:03.453Z,1528910823.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:03.471Z,1528910823.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:03.854Z,1528910823.854 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:03.872Z,1528910823.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:04.255Z,1528910824.255 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:04.273Z,1528910824.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:07.420Z,1528910827.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:07.453Z,1528910827.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:07.567Z,1528910827.567 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:07.605Z,1528910827.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:07.977Z,1528910827.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:08.006Z,1528910828.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:08.382Z,1528910828.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:08.410Z,1528910828.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:08.773Z,1528910828.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:08.808Z,1528910828.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:09.163Z,1528910829.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:09.180Z,1528910829.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:09.563Z,1528910829.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:09.581Z,1528910829.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:09.968Z,1528910829.968 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:09.985Z,1528910829.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:10.365Z,1528910830.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:10.382Z,1528910830.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:10.773Z,1528910830.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:10.799Z,1528910830.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:11.178Z,1528910831.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:11.214Z,1528910831.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:11.577Z,1528910831.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:11.611Z,1528910831.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:11.966Z,1528910831.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:11.984Z,1528910831.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:12.366Z,1528910832.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:12.388Z,1528910832.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:12.765Z,1528910832.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:12.783Z,1528910832.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:13.165Z,1528910833.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:13.184Z,1528910833.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:13.577Z,1528910833.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:13.595Z,1528910833.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:13.977Z,1528910833.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:14.019Z,1528910834.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:14.375Z,1528910834.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:14.393Z,1528910834.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:14.767Z,1528910834.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:14.801Z,1528910834.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:15.167Z,1528910835.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:15.191Z,1528910835.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:15.570Z,1528910835.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:15.588Z,1528910835.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:15.971Z,1528910835.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:15.989Z,1528910835.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:16.367Z,1528910836.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:16.391Z,1528910836.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:16.779Z,1528910836.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:16.797Z,1528910836.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:17.181Z,1528910837.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:17.199Z,1528910837.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:17.578Z,1528910837.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:17.596Z,1528910837.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:17.971Z,1528910837.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:17.989Z,1528910837.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:18.367Z,1528910838.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:18.391Z,1528910838.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:18.767Z,1528910838.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:18.793Z,1528910838.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:19.166Z,1528910839.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:19.185Z,1528910839.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:19.578Z,1528910839.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:19.596Z,1528910839.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:19.978Z,1528910839.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:19.997Z,1528910839.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:20.379Z,1528910840.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:20.397Z,1528910840.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:20.770Z,1528910840.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:20.788Z,1528910840.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:21.167Z,1528910841.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:21.191Z,1528910841.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:21.566Z,1528910841.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:21.584Z,1528910841.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:21.969Z,1528910841.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:21.987Z,1528910841.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:22.367Z,1528910842.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:22.390Z,1528910842.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:22.780Z,1528910842.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:22.799Z,1528910842.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:23.178Z,1528910843.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:23.200Z,1528910843.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:23.579Z,1528910843.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:23.597Z,1528910843.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:23.967Z,1528910843.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:23.984Z,1528910843.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:24.359Z,1528910844.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:24.395Z,1528910844.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:24.767Z,1528910844.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:24.802Z,1528910844.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:25.163Z,1528910845.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:25.192Z,1528910845.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:25.584Z,1528910845.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:25.602Z,1528910845.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:25.983Z,1528910845.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:26.001Z,1528910846.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:26.385Z,1528910846.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:26.403Z,1528910846.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:26.763Z,1528910846.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:26.794Z,1528910846.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:27.163Z,1528910847.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:27.192Z,1528910847.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:27.564Z,1528910847.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:27.594Z,1528910847.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:27.964Z,1528910847.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:28.000Z,1528910848.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:28.363Z,1528910848.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:28.400Z,1528910848.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:28.786Z,1528910848.786 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:28.804Z,1528910848.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:29.184Z,1528910849.184 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:29.202Z,1528910849.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:29.580Z,1528910849.580 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:29.600Z,1528910849.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:29.963Z,1528910849.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:30.004Z,1528910850.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:30.363Z,1528910850.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:30.400Z,1528910850.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:30.764Z,1528910850.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:30.800Z,1528910850.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:31.159Z,1528910851.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:31.192Z,1528910851.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:31.573Z,1528910851.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:31.602Z,1528910851.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:31.984Z,1528910851.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:32.002Z,1528910852.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:32.385Z,1528910852.385 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:32.403Z,1528910852.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:32.763Z,1528910852.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:32.793Z,1528910852.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:33.163Z,1528910853.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:33.204Z,1528910853.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:33.563Z,1528910853.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:33.597Z,1528910853.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:33.964Z,1528910853.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:33.981Z,1528910853.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:34.364Z,1528910854.364 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:34.399Z,1528910854.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:34.773Z,1528910854.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:34.791Z,1528910854.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:35.177Z,1528910855.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:35.195Z,1528910855.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:35.574Z,1528910855.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:35.592Z,1528910855.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:35.966Z,1528910855.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:35.983Z,1528910855.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:36.368Z,1528910856.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:36.386Z,1528910856.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:36.768Z,1528910856.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:36.786Z,1528910856.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:37.170Z,1528910857.170 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:37.188Z,1528910857.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:37.574Z,1528910857.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:37.592Z,1528910857.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:37.978Z,1528910857.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:37.995Z,1528910857.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:38.375Z,1528910858.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:38.392Z,1528910858.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:38.767Z,1528910858.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:38.792Z,1528910858.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:39.167Z,1528910859.167 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:39.200Z,1528910859.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:39.565Z,1528910859.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:39.583Z,1528910859.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:39.970Z,1528910859.970 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:39.988Z,1528910859.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:40.367Z,1528910860.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:40.397Z,1528910860.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:40.778Z,1528910860.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:40.796Z,1528910860.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:41.178Z,1528910861.178 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:41.196Z,1528910861.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:41.578Z,1528910861.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:41.596Z,1528910861.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:41.966Z,1528910861.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:41.984Z,1528910861.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:42.362Z,1528910862.362 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:42.394Z,1528910862.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:42.767Z,1528910862.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:42.792Z,1528910862.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:43.165Z,1528910863.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:43.183Z,1528910863.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:43.578Z,1528910863.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:43.596Z,1528910863.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:43.978Z,1528910863.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:43.996Z,1528910863.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:44.378Z,1528910864.378 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:44.396Z,1528910864.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:44.762Z,1528910864.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:44.794Z,1528910864.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:45.169Z,1528910865.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:45.187Z,1528910865.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:45.566Z,1528910865.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:45.583Z,1528910865.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:45.963Z,1528910865.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:45.994Z,1528910865.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:46.366Z,1528910866.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:46.391Z,1528910866.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:46.783Z,1528910866.783 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:46.801Z,1528910866.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:47.182Z,1528910867.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:47.199Z,1528910867.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:47.579Z,1528910867.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:47.597Z,1528910867.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:47.959Z,1528910867.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:47.997Z,1528910867.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:48.363Z,1528910868.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:48.396Z,1528910868.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:48.764Z,1528910868.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:48.795Z,1528910868.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:49.159Z,1528910869.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:49.186Z,1528910869.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:49.579Z,1528910869.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:49.597Z,1528910869.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:49.983Z,1528910869.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:50.001Z,1528910870.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:50.380Z,1528910870.380 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:50.398Z,1528910870.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:50.763Z,1528910870.763 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:50.796Z,1528910870.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:51.163Z,1528910871.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:51.191Z,1528910871.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:51.563Z,1528910871.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:51.591Z,1528910871.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:51.963Z,1528910871.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:51.990Z,1528910871.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:52.363Z,1528910872.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:52.391Z,1528910872.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:52.780Z,1528910872.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:52.804Z,1528910872.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:53.183Z,1528910873.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:53.201Z,1528910873.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:53.579Z,1528910873.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:53.598Z,1528910873.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:53.963Z,1528910873.963 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:53.991Z,1528910873.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:54.363Z,1528910874.363 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:54.390Z,1528910874.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:54.764Z,1528910874.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:54.792Z,1528910874.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:55.163Z,1528910875.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:55.191Z,1528910875.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:55.581Z,1528910875.581 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:55.599Z,1528910875.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:55.984Z,1528910875.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:56.002Z,1528910876.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:56.384Z,1528910876.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:56.402Z,1528910876.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:56.764Z,1528910876.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:56.794Z,1528910876.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:57.163Z,1528910877.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:57.200Z,1528910877.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:57.560Z,1528910877.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:57.594Z,1528910877.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:57.964Z,1528910877.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:58.000Z,1528910878.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:58.367Z,1528910878.367 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:58.400Z,1528910878.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:58.785Z,1528910878.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:58.803Z,1528910878.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:59.190Z,1528910879.190 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:59.208Z,1528910879.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:59.574Z,1528910879.574 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:59.612Z,1528910879.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:27:59.959Z,1528910879.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:27:59.985Z,1528910879.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:00.360Z,1528910880.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:00.404Z,1528910880.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:00.764Z,1528910880.764 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:00.782Z,1528910880.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:01.163Z,1528910881.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:01.181Z,1528910881.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:01.577Z,1528910881.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:01.611Z,1528910881.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:01.977Z,1528910881.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:02.011Z,1528910882.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:02.374Z,1528910882.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:02.404Z,1528910882.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:02.767Z,1528910882.767 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:02.785Z,1528910882.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:03.166Z,1528910883.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:03.184Z,1528910883.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:03.573Z,1528910883.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:03.591Z,1528910883.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:03.981Z,1528910883.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:04.015Z,1528910884.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:04.381Z,1528910884.381 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:04.400Z,1528910884.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:04.773Z,1528910884.773 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:04.791Z,1528910884.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:05.168Z,1528910885.168 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:05.196Z,1528910885.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:05.573Z,1528910885.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:05.591Z,1528910885.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:05.971Z,1528910885.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:05.988Z,1528910885.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:06.373Z,1528910886.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:06.391Z,1528910886.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:06.778Z,1528910886.778 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:06.796Z,1528910886.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:07.179Z,1528910887.179 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:07.197Z,1528910887.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:07.200Z,1528910887.200 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T17:23:07.1Z
2018-06-13T17:28:07.200Z,1528910887.200 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T17:28:07.200Z,1528910887.200 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T17:28:07.579Z,1528910887.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:07.604Z,1528910887.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:11.425Z,1528910891.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:11.442Z,1528910891.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:11.537Z,1528910891.537 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0324.lzma
2018-06-13T17:28:11.576Z,1528910891.576 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:11.620Z,1528910891.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:11.976Z,1528910891.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:11.994Z,1528910891.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:12.334Z,1528910892.334 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0324.lzma.bak
2018-06-13T17:28:12.334Z,1528910892.334 [DataOverHttps](INFO): SBD MOMSN=8329625
2018-06-13T17:28:12.390Z,1528910892.390 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:12.412Z,1528910892.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:14.274Z,1528910894.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:14.296Z,1528910894.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:14.407Z,1528910894.407 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:14.438Z,1528910894.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:17.550Z,1528910897.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:17.583Z,1528910897.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:17.696Z,1528910897.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:17.748Z,1528910897.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:18.120Z,1528910898.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:18.138Z,1528910898.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:18.526Z,1528910898.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:18.548Z,1528910898.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:18.909Z,1528910898.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:18.944Z,1528910898.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:19.303Z,1528910899.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:19.336Z,1528910899.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:19.704Z,1528910899.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:19.736Z,1528910899.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:20.104Z,1528910900.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:20.134Z,1528910900.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:20.503Z,1528910900.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:20.544Z,1528910900.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:23.634Z,1528910903.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:23.652Z,1528910903.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:23.768Z,1528910903.768 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0325.lzma
2018-06-13T17:28:23.811Z,1528910903.811 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:23.860Z,1528910903.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:24.198Z,1528910904.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:24.232Z,1528910904.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:24.562Z,1528910904.562 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0325.lzma.bak
2018-06-13T17:28:24.562Z,1528910904.562 [DataOverHttps](INFO): SBD MOMSN=8329627
2018-06-13T17:28:24.598Z,1528910904.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:24.616Z,1528910904.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:26.468Z,1528910906.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:26.494Z,1528910906.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:26.498Z,1528910906.498 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T17:28:26.498Z,1528910906.498 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T17:28:26.498Z,1528910906.498 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T17:28:26.601Z,1528910906.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:26.653Z,1528910906.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:27.034Z,1528910907.034 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:27.051Z,1528910907.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:27.432Z,1528910907.432 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:27.450Z,1528910907.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:27.818Z,1528910907.818 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:27.856Z,1528910907.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:30.945Z,1528910910.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:30.963Z,1528910910.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:31.071Z,1528910911.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:31.121Z,1528910911.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:31.499Z,1528910911.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:31.639Z,1528910911.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:31.887Z,1528910911.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:31.919Z,1528910911.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:32.306Z,1528910912.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:32.400Z,1528910912.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:32.686Z,1528910912.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:32.842Z,1528910912.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:33.076Z,1528910913.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:33.134Z,1528910913.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:33.474Z,1528910913.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:33.531Z,1528910913.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:33.883Z,1528910913.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:33.901Z,1528910913.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:34.284Z,1528910914.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:34.301Z,1528910914.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:34.680Z,1528910914.680 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:34.698Z,1528910914.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:35.071Z,1528910915.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:35.094Z,1528910915.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:35.475Z,1528910915.475 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:35.492Z,1528910915.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:35.866Z,1528910915.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:35.901Z,1528910915.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:36.271Z,1528910916.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:36.295Z,1528910916.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:36.684Z,1528910916.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:36.708Z,1528910916.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:37.083Z,1528910917.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:37.101Z,1528910917.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:37.482Z,1528910917.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:37.500Z,1528910917.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:37.870Z,1528910917.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:37.902Z,1528910917.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:38.273Z,1528910918.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:38.291Z,1528910918.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:38.672Z,1528910918.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:38.700Z,1528910918.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:39.074Z,1528910919.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:39.103Z,1528910919.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:39.469Z,1528910919.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:39.487Z,1528910919.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:39.882Z,1528910919.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:39.900Z,1528910919.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:40.282Z,1528910920.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:40.303Z,1528910920.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:40.679Z,1528910920.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:40.698Z,1528910920.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:41.071Z,1528910921.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:41.094Z,1528910921.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:41.474Z,1528910921.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:41.493Z,1528910921.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:41.874Z,1528910921.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:41.892Z,1528910921.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:42.271Z,1528910922.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:42.293Z,1528910922.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:42.683Z,1528910922.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:42.701Z,1528910922.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:43.082Z,1528910923.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:43.100Z,1528910923.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:43.482Z,1528910923.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:43.500Z,1528910923.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:43.874Z,1528910923.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:43.892Z,1528910923.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:44.273Z,1528910924.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:44.291Z,1528910924.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:44.672Z,1528910924.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:44.690Z,1528910924.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:45.075Z,1528910925.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:45.092Z,1528910925.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:45.467Z,1528910925.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:45.491Z,1528910925.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:45.882Z,1528910925.882 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:45.899Z,1528910925.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:46.283Z,1528910926.283 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:46.308Z,1528910926.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:46.683Z,1528910926.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:46.708Z,1528910926.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:47.072Z,1528910927.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:47.090Z,1528910927.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:47.474Z,1528910927.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:47.492Z,1528910927.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:47.874Z,1528910927.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:47.892Z,1528910927.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:48.274Z,1528910928.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:48.296Z,1528910928.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:48.686Z,1528910928.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:48.704Z,1528910928.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:49.086Z,1528910929.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:49.111Z,1528910929.111 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:49.111Z,1528910929.111 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 280
2018-06-13T17:28:49.111Z,1528910929.111 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:28:49.129Z,1528910929.129 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:49.129Z,1528910929.129 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 280
2018-06-13T17:28:49.129Z,1528910929.129 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:28:49.131Z,1528910929.131 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:49.131Z,1528910929.131 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 280
2018-06-13T17:28:49.131Z,1528910929.131 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:28:49.214Z,1528910929.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:28:49.214Z,1528910929.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:28:49.214Z,1528910929.214 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:28:49.478Z,1528910929.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:49.581Z,1528910929.581 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:28:49.581Z,1528910929.581 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 280
2018-06-13T17:28:49.582Z,1528910929.582 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:28:49.582Z,1528910929.582 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 280
2018-06-13T17:28:49.582Z,1528910929.582 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:28:49.582Z,1528910929.582 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 280
2018-06-13T17:28:49.867Z,1528910929.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:49.903Z,1528910929.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:28:49.904Z,1528910929.904 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:28:49.904Z,1528910929.904 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:28:49.904Z,1528910929.904 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:28:49.905Z,1528910929.905 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:28:49.905Z,1528910929.905 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:28:49.906Z,1528910929.906 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:28:49.906Z,1528910929.906 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:28:49.906Z,1528910929.906 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:28:50.263Z,1528910930.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:50.299Z,1528910930.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:28:50.300Z,1528910930.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:50.667Z,1528910930.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:50.693Z,1528910930.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:28:50.694Z,1528910930.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:51.068Z,1528910931.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:51.104Z,1528910931.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:28:51.105Z,1528910931.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:51.467Z,1528910931.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:51.496Z,1528910931.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:28:51.496Z,1528910931.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:51.884Z,1528910931.884 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:51.901Z,1528910931.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:28:51.902Z,1528910931.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:52.288Z,1528910932.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:52.306Z,1528910932.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:28:52.307Z,1528910932.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:52.683Z,1528910932.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:52.701Z,1528910932.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:28:52.702Z,1528910932.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:53.068Z,1528910933.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:53.095Z,1528910933.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:28:53.096Z,1528910933.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:53.467Z,1528910933.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:53.496Z,1528910933.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:28:53.497Z,1528910933.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:53.868Z,1528910933.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:53.894Z,1528910933.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:28:53.895Z,1528910933.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:54.267Z,1528910934.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:54.300Z,1528910934.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:28:54.301Z,1528910934.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:54.688Z,1528910934.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:54.706Z,1528910934.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:28:54.707Z,1528910934.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:55.088Z,1528910935.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:55.106Z,1528910935.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:28:55.107Z,1528910935.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:55.483Z,1528910935.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:55.501Z,1528910935.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:28:55.502Z,1528910935.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:55.867Z,1528910935.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:55.905Z,1528910935.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:28:55.906Z,1528910935.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:56.263Z,1528910936.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:56.280Z,1528910936.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:28:56.297Z,1528910936.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:56.667Z,1528910936.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:56.684Z,1528910936.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:28:56.701Z,1528910936.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:57.068Z,1528910937.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:57.088Z,1528910937.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:28:57.106Z,1528910937.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:57.471Z,1528910937.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:57.488Z,1528910937.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:28:57.489Z,1528910937.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:57.881Z,1528910937.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:57.913Z,1528910937.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:28:57.914Z,1528910937.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:58.281Z,1528910938.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:58.315Z,1528910938.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:28:58.316Z,1528910938.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:58.678Z,1528910938.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:58.711Z,1528910938.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:28:58.712Z,1528910938.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:59.070Z,1528910939.070 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:59.087Z,1528910939.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:28:59.088Z,1528910939.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:59.470Z,1528910939.470 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:59.488Z,1528910939.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:28:59.489Z,1528910939.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:28:59.870Z,1528910939.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:28:59.888Z,1528910939.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:28:59.889Z,1528910939.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:00.270Z,1528910940.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:00.287Z,1528910940.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:29:00.288Z,1528910940.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:00.681Z,1528910940.681 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:00.715Z,1528910940.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:29:00.716Z,1528910940.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:01.081Z,1528910941.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:01.099Z,1528910941.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:29:01.100Z,1528910941.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:01.478Z,1528910941.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:01.495Z,1528910941.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:29:01.496Z,1528910941.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:01.874Z,1528910941.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:01.892Z,1528910941.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:29:01.893Z,1528910941.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:02.272Z,1528910942.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:02.290Z,1528910942.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:29:02.291Z,1528910942.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:02.672Z,1528910942.672 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:02.690Z,1528910942.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:29:02.691Z,1528910942.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:03.075Z,1528910943.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:03.093Z,1528910943.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:29:03.094Z,1528910943.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:03.467Z,1528910943.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:03.490Z,1528910943.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:29:03.491Z,1528910943.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:03.877Z,1528910943.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:03.896Z,1528910943.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:29:03.896Z,1528910943.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:04.281Z,1528910944.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:04.299Z,1528910944.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:29:04.300Z,1528910944.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:04.682Z,1528910944.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:04.699Z,1528910944.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:29:04.700Z,1528910944.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:05.067Z,1528910945.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:05.090Z,1528910945.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:29:05.091Z,1528910945.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:05.474Z,1528910945.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:05.491Z,1528910945.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:29:05.492Z,1528910945.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:05.870Z,1528910945.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:05.888Z,1528910945.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:29:05.888Z,1528910945.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:06.274Z,1528910946.274 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:06.291Z,1528910946.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:29:06.292Z,1528910946.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:06.679Z,1528910946.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:06.705Z,1528910946.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:29:06.706Z,1528910946.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:07.083Z,1528910947.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:07.100Z,1528910947.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:29:07.101Z,1528910947.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:07.484Z,1528910947.484 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:07.501Z,1528910947.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:29:07.502Z,1528910947.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:07.871Z,1528910947.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:07.898Z,1528910947.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:29:07.898Z,1528910947.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:08.263Z,1528910948.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:08.301Z,1528910948.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:29:08.302Z,1528910948.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:08.667Z,1528910948.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:08.695Z,1528910948.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:29:08.696Z,1528910948.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:09.068Z,1528910949.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:09.108Z,1528910949.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T17:29:09.109Z,1528910949.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:09.471Z,1528910949.471 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:09.499Z,1528910949.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:09.883Z,1528910949.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:09.902Z,1528910949.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:10.288Z,1528910950.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:10.307Z,1528910950.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:10.683Z,1528910950.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:10.703Z,1528910950.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:11.067Z,1528910951.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:11.094Z,1528910951.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:11.468Z,1528910951.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:11.498Z,1528910951.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:11.868Z,1528910951.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:11.896Z,1528910951.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:12.267Z,1528910952.267 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:12.294Z,1528910952.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:12.689Z,1528910952.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:12.707Z,1528910952.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:13.083Z,1528910953.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:13.101Z,1528910953.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:13.485Z,1528910953.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:13.503Z,1528910953.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:13.864Z,1528910953.864 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:13.904Z,1528910953.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:14.263Z,1528910954.263 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:14.297Z,1528910954.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:14.677Z,1528910954.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:14.713Z,1528910954.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:15.089Z,1528910955.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:15.112Z,1528910955.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:15.478Z,1528910955.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:15.520Z,1528910955.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:15.863Z,1528910955.863 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:15.882Z,1528910955.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:16.268Z,1528910956.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:16.286Z,1528910956.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:16.682Z,1528910956.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:16.716Z,1528910956.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:17.086Z,1528910957.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:17.113Z,1528910957.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:17.482Z,1528910957.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:17.522Z,1528910957.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:17.868Z,1528910957.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:17.886Z,1528910957.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:18.272Z,1528910958.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:18.290Z,1528910958.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:18.682Z,1528910958.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:18.716Z,1528910958.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:19.077Z,1528910959.077 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:19.117Z,1528910959.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:19.478Z,1528910959.478 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:19.495Z,1528910959.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:19.872Z,1528910959.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:19.898Z,1528910959.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:20.266Z,1528910960.266 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:20.296Z,1528910960.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:20.682Z,1528910960.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:20.700Z,1528910960.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:21.083Z,1528910961.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:21.101Z,1528910961.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:21.482Z,1528910961.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:21.508Z,1528910961.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:21.874Z,1528910961.874 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:21.892Z,1528910961.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:22.271Z,1528910962.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:22.296Z,1528910962.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:22.682Z,1528910962.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:22.700Z,1528910962.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:23.082Z,1528910963.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:23.104Z,1528910963.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:23.483Z,1528910963.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:23.508Z,1528910963.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:23.873Z,1528910963.873 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:23.891Z,1528910963.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:24.271Z,1528910964.271 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:24.293Z,1528910964.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:24.683Z,1528910964.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:24.701Z,1528910964.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:25.083Z,1528910965.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:25.100Z,1528910965.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:25.482Z,1528910965.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:25.499Z,1528910965.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:25.871Z,1528910965.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:25.896Z,1528910965.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:26.273Z,1528910966.273 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:26.291Z,1528910966.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:26.682Z,1528910966.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:26.704Z,1528910966.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:27.086Z,1528910967.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:27.104Z,1528910967.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:30.193Z,1528910970.193 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:30.235Z,1528910970.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:30.347Z,1528910970.347 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:30.384Z,1528910970.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:30.743Z,1528910970.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:30.778Z,1528910970.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:31.144Z,1528910971.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:31.162Z,1528910971.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:31.542Z,1528910971.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:31.560Z,1528910971.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:31.954Z,1528910971.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:31.988Z,1528910971.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:32.353Z,1528910972.353 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:32.371Z,1528910972.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:32.750Z,1528910972.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:32.767Z,1528910972.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:33.146Z,1528910973.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:33.172Z,1528910973.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:33.541Z,1528910973.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:33.559Z,1528910973.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:33.944Z,1528910973.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:33.970Z,1528910973.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:34.345Z,1528910974.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:34.363Z,1528910974.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:34.746Z,1528910974.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:34.768Z,1528910974.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:35.154Z,1528910975.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:35.172Z,1528910975.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:35.553Z,1528910975.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:35.571Z,1528910975.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:35.944Z,1528910975.944 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:35.962Z,1528910975.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:36.344Z,1528910976.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:36.362Z,1528910976.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:36.746Z,1528910976.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:36.764Z,1528910976.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:37.142Z,1528910977.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:37.159Z,1528910977.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:37.544Z,1528910977.544 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:37.562Z,1528910977.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:37.953Z,1528910977.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:37.971Z,1528910977.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:38.357Z,1528910978.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:38.391Z,1528910978.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:38.750Z,1528910978.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:38.767Z,1528910978.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:39.146Z,1528910979.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:39.164Z,1528910979.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:39.539Z,1528910979.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:39.562Z,1528910979.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:39.945Z,1528910979.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:39.963Z,1528910979.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:40.344Z,1528910980.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:40.370Z,1528910980.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:40.750Z,1528910980.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:40.768Z,1528910980.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:41.153Z,1528910981.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:41.171Z,1528910981.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:41.554Z,1528910981.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:41.572Z,1528910981.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:41.939Z,1528910981.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:41.962Z,1528910981.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:42.344Z,1528910982.344 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:42.362Z,1528910982.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:42.746Z,1528910982.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:42.772Z,1528910982.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:43.142Z,1528910983.142 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:43.159Z,1528910983.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:43.543Z,1528910983.543 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:43.565Z,1528910983.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:43.953Z,1528910983.953 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:43.972Z,1528910983.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:44.350Z,1528910984.350 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:44.372Z,1528910984.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:44.751Z,1528910984.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:44.769Z,1528910984.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:45.138Z,1528910985.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:45.164Z,1528910985.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:45.545Z,1528910985.545 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:45.568Z,1528910985.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:45.946Z,1528910985.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:45.963Z,1528910985.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:46.343Z,1528910986.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:46.368Z,1528910986.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:46.755Z,1528910986.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:46.773Z,1528910986.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:47.154Z,1528910987.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:47.176Z,1528910987.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:47.555Z,1528910987.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:47.573Z,1528910987.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:47.941Z,1528910987.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:47.959Z,1528910987.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:48.349Z,1528910988.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:48.367Z,1528910988.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:48.746Z,1528910988.746 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:48.769Z,1528910988.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:49.139Z,1528910989.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:49.163Z,1528910989.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:49.538Z,1528910989.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:49.571Z,1528910989.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:49.955Z,1528910989.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:49.973Z,1528910989.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:50.357Z,1528910990.357 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:50.375Z,1528910990.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:50.754Z,1528910990.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:50.772Z,1528910990.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:51.146Z,1528910991.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:51.172Z,1528910991.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:51.536Z,1528910991.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:51.564Z,1528910991.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:51.940Z,1528910991.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:51.967Z,1528910991.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:52.340Z,1528910992.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:52.368Z,1528910992.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:52.752Z,1528910992.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:52.770Z,1528910992.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:53.160Z,1528910993.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:53.178Z,1528910993.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:53.560Z,1528910993.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:53.579Z,1528910993.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:53.935Z,1528910993.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:53.963Z,1528910993.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:54.340Z,1528910994.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:54.376Z,1528910994.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:54.739Z,1528910994.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:54.774Z,1528910994.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:55.140Z,1528910995.140 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:55.171Z,1528910995.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:55.539Z,1528910995.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:55.571Z,1528910995.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:55.960Z,1528910995.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:55.979Z,1528910995.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:56.354Z,1528910996.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:56.379Z,1528910996.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:56.755Z,1528910996.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:56.773Z,1528910996.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:57.139Z,1528910997.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:57.176Z,1528910997.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:57.535Z,1528910997.535 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:57.569Z,1528910997.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:57.940Z,1528910997.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:57.975Z,1528910997.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:58.343Z,1528910998.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:58.382Z,1528910998.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:58.749Z,1528910998.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:58.783Z,1528910998.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:59.160Z,1528910999.160 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:59.178Z,1528910999.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:59.560Z,1528910999.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:59.578Z,1528910999.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:29:59.936Z,1528910999.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:29:59.975Z,1528910999.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:00.339Z,1528911000.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:00.378Z,1528911000.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:00.749Z,1528911000.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:00.790Z,1528911000.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:01.150Z,1528911001.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:01.178Z,1528911001.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:01.549Z,1528911001.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:01.578Z,1528911001.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:01.941Z,1528911001.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:01.975Z,1528911001.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:02.340Z,1528911002.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:02.384Z,1528911002.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:02.754Z,1528911002.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:02.788Z,1528911002.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:03.159Z,1528911003.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:03.188Z,1528911003.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:03.554Z,1528911003.554 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:03.587Z,1528911003.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:03.940Z,1528911003.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:03.958Z,1528911003.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:04.343Z,1528911004.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:04.361Z,1528911004.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:04.749Z,1528911004.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:04.768Z,1528911004.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:05.153Z,1528911005.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:05.193Z,1528911005.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:05.552Z,1528911005.552 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:05.570Z,1528911005.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:05.941Z,1528911005.941 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:05.964Z,1528911005.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:06.345Z,1528911006.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:06.363Z,1528911006.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:06.749Z,1528911006.749 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:06.767Z,1528911006.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:07.149Z,1528911007.149 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:07.167Z,1528911007.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:07.549Z,1528911007.549 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:07.567Z,1528911007.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:07.947Z,1528911007.947 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:07.965Z,1528911007.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:08.345Z,1528911008.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:08.363Z,1528911008.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:08.750Z,1528911008.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:08.768Z,1528911008.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:09.153Z,1528911009.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:09.170Z,1528911009.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:09.550Z,1528911009.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:09.568Z,1528911009.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:09.946Z,1528911009.946 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:09.964Z,1528911009.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:10.346Z,1528911010.346 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:10.363Z,1528911010.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:10.750Z,1528911010.750 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:10.776Z,1528911010.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:11.153Z,1528911011.153 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:11.171Z,1528911011.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:11.551Z,1528911011.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:11.572Z,1528911011.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:11.942Z,1528911011.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:11.959Z,1528911011.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:12.343Z,1528911012.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:12.365Z,1528911012.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:12.753Z,1528911012.753 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:12.771Z,1528911012.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:13.150Z,1528911013.150 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:13.172Z,1528911013.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:13.550Z,1528911013.550 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:13.568Z,1528911013.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:13.942Z,1528911013.942 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:13.960Z,1528911013.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:14.339Z,1528911014.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:14.369Z,1528911014.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:14.755Z,1528911014.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:14.780Z,1528911014.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:15.158Z,1528911015.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:15.176Z,1528911015.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:15.555Z,1528911015.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:15.573Z,1528911015.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:15.943Z,1528911015.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:15.967Z,1528911015.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:16.335Z,1528911016.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:16.363Z,1528911016.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:16.755Z,1528911016.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:16.773Z,1528911016.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:17.158Z,1528911017.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:17.176Z,1528911017.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:17.559Z,1528911017.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:17.577Z,1528911017.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:17.945Z,1528911017.945 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:17.962Z,1528911017.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:18.343Z,1528911018.343 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:18.366Z,1528911018.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:18.758Z,1528911018.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:18.776Z,1528911018.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:19.158Z,1528911019.158 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:19.176Z,1528911019.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:19.556Z,1528911019.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:19.574Z,1528911019.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:19.940Z,1528911019.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:19.967Z,1528911019.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:20.339Z,1528911020.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:20.379Z,1528911020.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:20.755Z,1528911020.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:20.773Z,1528911020.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:21.155Z,1528911021.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:21.173Z,1528911021.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:21.556Z,1528911021.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:21.574Z,1528911021.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:21.940Z,1528911021.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:21.975Z,1528911021.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:22.340Z,1528911022.340 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:22.367Z,1528911022.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:22.759Z,1528911022.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:22.777Z,1528911022.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:23.159Z,1528911023.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:23.176Z,1528911023.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:23.555Z,1528911023.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:23.576Z,1528911023.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:23.940Z,1528911023.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:23.967Z,1528911023.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:24.339Z,1528911024.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:24.372Z,1528911024.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:24.759Z,1528911024.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:24.777Z,1528911024.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:25.159Z,1528911025.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:25.177Z,1528911025.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:25.555Z,1528911025.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:25.573Z,1528911025.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:25.935Z,1528911025.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:25.972Z,1528911025.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:26.339Z,1528911026.339 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:26.367Z,1528911026.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:26.759Z,1528911026.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:26.777Z,1528911026.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:27.164Z,1528911027.164 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:27.188Z,1528911027.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:30.270Z,1528911030.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:30.288Z,1528911030.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:30.420Z,1528911030.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:30.468Z,1528911030.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:30.819Z,1528911030.819 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:30.844Z,1528911030.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:31.227Z,1528911031.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:31.254Z,1528911031.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:31.618Z,1528911031.618 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:31.636Z,1528911031.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:32.029Z,1528911032.029 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:32.047Z,1528911032.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:32.430Z,1528911032.430 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:32.448Z,1528911032.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:32.830Z,1528911032.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:32.847Z,1528911032.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:33.221Z,1528911033.221 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:33.238Z,1528911033.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:33.620Z,1528911033.620 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:33.638Z,1528911033.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:34.020Z,1528911034.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:34.038Z,1528911034.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:34.414Z,1528911034.414 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:34.440Z,1528911034.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:34.826Z,1528911034.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:34.844Z,1528911034.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:35.237Z,1528911035.237 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:35.271Z,1528911035.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:35.629Z,1528911035.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:35.652Z,1528911035.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:36.021Z,1528911036.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:36.039Z,1528911036.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:36.419Z,1528911036.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:36.445Z,1528911036.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:36.826Z,1528911036.826 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:36.852Z,1528911036.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:37.226Z,1528911037.226 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:37.252Z,1528911037.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:37.619Z,1528911037.619 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:37.649Z,1528911037.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:38.037Z,1528911038.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:38.054Z,1528911038.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:38.436Z,1528911038.436 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:38.454Z,1528911038.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:38.832Z,1528911038.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:38.850Z,1528911038.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:39.215Z,1528911039.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:39.246Z,1528911039.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:39.615Z,1528911039.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:39.648Z,1528911039.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:40.026Z,1528911040.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:40.044Z,1528911040.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:40.415Z,1528911040.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:40.448Z,1528911040.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:40.832Z,1528911040.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:40.850Z,1528911040.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:41.235Z,1528911041.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:41.261Z,1528911041.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:41.635Z,1528911041.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:41.653Z,1528911041.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:42.016Z,1528911042.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:42.048Z,1528911042.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:42.411Z,1528911042.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:42.447Z,1528911042.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:42.815Z,1528911042.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:42.844Z,1528911042.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:43.225Z,1528911043.225 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:43.243Z,1528911043.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:43.615Z,1528911043.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:43.651Z,1528911043.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:44.031Z,1528911044.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:44.055Z,1528911044.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:44.435Z,1528911044.435 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:44.453Z,1528911044.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:44.832Z,1528911044.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:44.850Z,1528911044.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:45.215Z,1528911045.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:45.245Z,1528911045.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:45.615Z,1528911045.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:45.648Z,1528911045.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:46.016Z,1528911046.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:46.047Z,1528911046.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:46.415Z,1528911046.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:46.452Z,1528911046.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:46.830Z,1528911046.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:46.862Z,1528911046.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:47.236Z,1528911047.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:47.260Z,1528911047.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:47.636Z,1528911047.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:47.654Z,1528911047.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:48.012Z,1528911048.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:48.047Z,1528911048.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:48.415Z,1528911048.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:48.452Z,1528911048.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:48.816Z,1528911048.816 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:48.846Z,1528911048.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:49.216Z,1528911049.216 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:49.244Z,1528911049.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:49.615Z,1528911049.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:49.643Z,1528911049.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:50.037Z,1528911050.037 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:50.055Z,1528911050.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:50.431Z,1528911050.431 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:50.448Z,1528911050.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:50.825Z,1528911050.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:50.862Z,1528911050.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:51.215Z,1528911051.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:51.245Z,1528911051.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:51.612Z,1528911051.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:51.644Z,1528911051.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:52.015Z,1528911052.015 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:52.043Z,1528911052.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:52.415Z,1528911052.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:52.444Z,1528911052.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:52.832Z,1528911052.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:52.850Z,1528911052.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:53.231Z,1528911053.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:53.249Z,1528911053.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:53.636Z,1528911053.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:53.655Z,1528911053.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:54.016Z,1528911054.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:54.043Z,1528911054.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:54.415Z,1528911054.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:54.442Z,1528911054.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:54.836Z,1528911054.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:54.855Z,1528911054.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:55.235Z,1528911055.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:55.253Z,1528911055.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:55.631Z,1528911055.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:55.650Z,1528911055.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:56.012Z,1528911056.012 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:56.052Z,1528911056.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:56.411Z,1528911056.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:56.452Z,1528911056.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:56.832Z,1528911056.832 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:56.850Z,1528911056.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:57.232Z,1528911057.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:57.250Z,1528911057.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:57.627Z,1528911057.627 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:57.652Z,1528911057.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:58.016Z,1528911058.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:58.046Z,1528911058.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:58.415Z,1528911058.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:58.456Z,1528911058.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:58.825Z,1528911058.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:58.853Z,1528911058.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:59.236Z,1528911059.236 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:59.254Z,1528911059.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:30:59.636Z,1528911059.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:30:59.654Z,1528911059.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:00.016Z,1528911060.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:00.054Z,1528911060.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:00.411Z,1528911060.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:00.428Z,1528911060.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:00.829Z,1528911060.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:00.859Z,1528911060.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:01.229Z,1528911061.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:01.264Z,1528911061.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:01.626Z,1528911061.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:01.659Z,1528911061.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:02.016Z,1528911062.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:02.050Z,1528911062.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:02.411Z,1528911062.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:02.429Z,1528911062.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:02.825Z,1528911062.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:02.860Z,1528911062.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:03.234Z,1528911063.234 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:03.263Z,1528911063.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:03.630Z,1528911063.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:03.663Z,1528911063.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:04.019Z,1528911064.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:04.038Z,1528911064.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:04.413Z,1528911064.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:04.431Z,1528911064.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:04.825Z,1528911064.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:04.859Z,1528911064.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:05.229Z,1528911065.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:05.266Z,1528911065.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:05.629Z,1528911065.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:05.667Z,1528911065.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:06.020Z,1528911066.020 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:06.038Z,1528911066.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:06.418Z,1528911066.418 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:06.436Z,1528911066.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:06.829Z,1528911066.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:06.867Z,1528911066.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:07.229Z,1528911067.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:07.266Z,1528911067.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:07.629Z,1528911067.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:07.665Z,1528911067.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:08.019Z,1528911068.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:08.038Z,1528911068.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:08.416Z,1528911068.416 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:08.434Z,1528911068.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:08.829Z,1528911068.829 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:08.868Z,1528911068.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:09.229Z,1528911069.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:09.252Z,1528911069.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:09.626Z,1528911069.626 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:09.648Z,1528911069.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:10.019Z,1528911070.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:10.051Z,1528911070.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:10.419Z,1528911070.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:10.446Z,1528911070.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:10.827Z,1528911070.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:10.845Z,1528911070.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:11.230Z,1528911071.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:11.252Z,1528911071.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:11.631Z,1528911071.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:11.656Z,1528911071.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:12.022Z,1528911072.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:12.040Z,1528911072.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:12.419Z,1528911072.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:12.442Z,1528911072.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:12.831Z,1528911072.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:12.856Z,1528911072.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:13.232Z,1528911073.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:13.252Z,1528911073.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:13.630Z,1528911073.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:13.648Z,1528911073.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:14.019Z,1528911074.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:14.045Z,1528911074.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:14.420Z,1528911074.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:14.438Z,1528911074.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:14.831Z,1528911074.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:14.856Z,1528911074.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:15.231Z,1528911075.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:15.256Z,1528911075.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:15.628Z,1528911075.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:15.652Z,1528911075.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:16.026Z,1528911076.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:16.044Z,1528911076.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:16.419Z,1528911076.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:16.445Z,1528911076.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:16.831Z,1528911076.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:16.850Z,1528911076.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:17.230Z,1528911077.230 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:17.252Z,1528911077.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:17.634Z,1528911077.634 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:17.652Z,1528911077.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:18.022Z,1528911078.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:18.040Z,1528911078.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:18.419Z,1528911078.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:18.451Z,1528911078.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:18.831Z,1528911078.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:18.873Z,1528911078.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:19.231Z,1528911079.231 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:19.249Z,1528911079.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:19.631Z,1528911079.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:19.650Z,1528911079.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:20.022Z,1528911080.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:20.041Z,1528911080.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:20.415Z,1528911080.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:20.438Z,1528911080.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:20.830Z,1528911080.830 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:20.852Z,1528911080.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:21.229Z,1528911081.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:21.252Z,1528911081.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:21.631Z,1528911081.631 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:21.656Z,1528911081.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:22.019Z,1528911082.019 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:22.049Z,1528911082.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:22.419Z,1528911082.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:22.445Z,1528911082.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:22.828Z,1528911082.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:22.852Z,1528911082.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:23.235Z,1528911083.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:23.252Z,1528911083.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:23.636Z,1528911083.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:23.655Z,1528911083.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:24.023Z,1528911084.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:24.041Z,1528911084.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:24.419Z,1528911084.419 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:24.449Z,1528911084.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:24.837Z,1528911084.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:24.855Z,1528911084.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:25.239Z,1528911085.239 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:25.257Z,1528911085.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:25.635Z,1528911085.635 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:25.653Z,1528911085.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:26.016Z,1528911086.016 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:26.048Z,1528911086.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:26.426Z,1528911086.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:26.444Z,1528911086.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:26.815Z,1528911086.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:26.852Z,1528911086.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:27.240Z,1528911087.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:27.259Z,1528911087.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:30.413Z,1528911090.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:30.439Z,1528911090.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:30.578Z,1528911090.578 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:30.612Z,1528911090.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:30.960Z,1528911090.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:30.000Z,1528911091.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:31.356Z,1528911091.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:31.387Z,1528911091.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:31.755Z,1528911091.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:31.772Z,1528911091.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:32.169Z,1528911092.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:32.200Z,1528911092.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:32.565Z,1528911092.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:32.601Z,1528911092.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:32.969Z,1528911092.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:32.996Z,1528911092.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:33.356Z,1528911093.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:33.391Z,1528911093.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:33.756Z,1528911093.756 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:33.778Z,1528911093.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:34.154Z,1528911094.154 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:34.184Z,1528911094.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:34.560Z,1528911094.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:34.586Z,1528911094.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:34.964Z,1528911094.964 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:34.991Z,1528911094.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:35.370Z,1528911095.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:35.392Z,1528911095.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:35.771Z,1528911095.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:35.789Z,1528911095.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:36.161Z,1528911096.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:36.179Z,1528911096.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:36.563Z,1528911096.563 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:36.632Z,1528911096.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:36.955Z,1528911096.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:36.990Z,1528911096.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:37.351Z,1528911097.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:37.387Z,1528911097.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:37.755Z,1528911097.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:37.798Z,1528911097.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:38.176Z,1528911098.176 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:38.195Z,1528911098.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:38.577Z,1528911098.577 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:38.595Z,1528911098.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:38.980Z,1528911098.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:38.998Z,1528911098.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:39.356Z,1528911099.356 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:39.393Z,1528911099.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:39.752Z,1528911099.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:39.787Z,1528911099.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:40.156Z,1528911100.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:40.190Z,1528911100.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:40.557Z,1528911100.557 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:40.591Z,1528911100.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:40.966Z,1528911100.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:41.001Z,1528911101.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:41.370Z,1528911101.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:41.398Z,1528911101.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:41.770Z,1528911101.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:41.800Z,1528911101.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:42.155Z,1528911102.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:42.174Z,1528911102.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:42.560Z,1528911102.560 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:42.605Z,1528911102.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:42.958Z,1528911102.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:42.977Z,1528911102.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:43.355Z,1528911103.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:43.373Z,1528911103.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:43.758Z,1528911103.758 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:43.776Z,1528911103.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:44.169Z,1528911104.169 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:44.204Z,1528911104.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:44.569Z,1528911104.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:44.608Z,1528911104.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:44.966Z,1528911104.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:44.983Z,1528911104.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:45.361Z,1528911105.361 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:45.384Z,1528911105.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:45.757Z,1528911105.757 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:45.775Z,1528911105.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:46.162Z,1528911106.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:46.179Z,1528911106.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:46.562Z,1528911106.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:46.580Z,1528911106.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:46.966Z,1528911106.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:46.984Z,1528911106.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:47.370Z,1528911107.370 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:47.388Z,1528911107.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:47.770Z,1528911107.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:47.788Z,1528911107.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:48.162Z,1528911108.162 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:48.179Z,1528911108.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:48.559Z,1528911108.559 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:48.581Z,1528911108.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:48.962Z,1528911108.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:48.980Z,1528911108.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:49.358Z,1528911109.358 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:49.376Z,1528911109.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:49.759Z,1528911109.759 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:49.781Z,1528911109.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:50.173Z,1528911110.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:50.191Z,1528911110.191 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:50.192Z,1528911110.192 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 281
2018-06-13T17:31:50.192Z,1528911110.192 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:31:50.214Z,1528911110.214 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:50.214Z,1528911110.214 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 281
2018-06-13T17:31:50.214Z,1528911110.214 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:31:50.215Z,1528911110.215 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:50.216Z,1528911110.216 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 281
2018-06-13T17:31:50.216Z,1528911110.216 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:31:50.305Z,1528911110.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:31:50.305Z,1528911110.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:31:50.305Z,1528911110.305 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:31:50.569Z,1528911110.569 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:50.669Z,1528911110.669 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:31:50.669Z,1528911110.669 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 281
2018-06-13T17:31:50.670Z,1528911110.670 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:31:50.670Z,1528911110.670 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 281
2018-06-13T17:31:50.670Z,1528911110.670 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:31:50.670Z,1528911110.670 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 281
2018-06-13T17:31:50.967Z,1528911110.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:50.984Z,1528911110.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:31:50.984Z,1528911110.984 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:31:50.985Z,1528911110.985 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:31:50.985Z,1528911110.985 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:31:50.986Z,1528911110.986 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:31:50.986Z,1528911110.986 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:31:50.986Z,1528911110.986 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:31:50.987Z,1528911110.987 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:31:50.987Z,1528911110.987 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:31:51.355Z,1528911111.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:51.394Z,1528911111.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:31:51.395Z,1528911111.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:51.755Z,1528911111.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:51.786Z,1528911111.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:31:51.787Z,1528911111.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:52.155Z,1528911112.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:52.188Z,1528911112.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:31:52.189Z,1528911112.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:52.591Z,1528911112.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:31:52.592Z,1528911112.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:52.989Z,1528911112.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:31:52.990Z,1528911112.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:53.392Z,1528911113.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:31:53.392Z,1528911113.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:53.793Z,1528911113.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:31:53.794Z,1528911113.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:54.184Z,1528911114.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:31:54.189Z,1528911114.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:54.580Z,1528911114.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:31:54.581Z,1528911114.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:54.972Z,1528911114.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:31:54.986Z,1528911114.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:55.369Z,1528911115.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:31:55.370Z,1528911115.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:55.772Z,1528911115.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:31:55.773Z,1528911115.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:56.174Z,1528911116.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:56.205Z,1528911116.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:31:56.206Z,1528911116.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:56.573Z,1528911116.573 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:56.603Z,1528911116.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:31:56.604Z,1528911116.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:56.973Z,1528911116.973 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:56.999Z,1528911116.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:31:57.000Z,1528911117.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:57.359Z,1528911117.359 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:57.377Z,1528911117.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:31:57.378Z,1528911117.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:57.754Z,1528911117.754 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:57.772Z,1528911117.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:31:57.773Z,1528911117.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:58.159Z,1528911118.159 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:58.176Z,1528911118.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:31:58.177Z,1528911118.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:58.558Z,1528911118.558 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:58.576Z,1528911118.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:31:58.577Z,1528911118.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:58.962Z,1528911118.962 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:58.980Z,1528911118.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:31:58.981Z,1528911118.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:59.365Z,1528911119.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:31:59.383Z,1528911119.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:31:59.384Z,1528911119.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:31:59.787Z,1528911119.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:31:59.788Z,1528911119.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:00.178Z,1528911120.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:32:00.179Z,1528911120.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:00.584Z,1528911120.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:32:00.585Z,1528911120.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:00.980Z,1528911120.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:32:00.981Z,1528911120.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:01.375Z,1528911121.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:32:01.376Z,1528911121.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:01.779Z,1528911121.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:32:01.780Z,1528911121.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:02.187Z,1528911122.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:32:02.188Z,1528911122.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:02.588Z,1528911122.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:32:02.589Z,1528911122.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:02.983Z,1528911122.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:32:02.984Z,1528911122.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:03.382Z,1528911123.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:32:03.383Z,1528911123.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:03.784Z,1528911123.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:32:03.789Z,1528911123.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:04.179Z,1528911124.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:32:04.180Z,1528911124.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:04.583Z,1528911124.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:32:04.584Z,1528911124.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:04.984Z,1528911124.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:32:04.985Z,1528911124.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:05.392Z,1528911125.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:32:05.393Z,1528911125.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:05.788Z,1528911125.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:32:05.793Z,1528911125.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:06.176Z,1528911126.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:32:06.177Z,1528911126.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:06.582Z,1528911126.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:32:06.582Z,1528911126.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:06.981Z,1528911126.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:32:06.982Z,1528911126.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:07.380Z,1528911127.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:32:07.381Z,1528911127.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:07.779Z,1528911127.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:32:07.780Z,1528911127.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:08.192Z,1528911128.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:32:08.193Z,1528911128.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:08.596Z,1528911128.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:32:08.597Z,1528911128.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:08.992Z,1528911128.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:32:08.993Z,1528911128.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:09.383Z,1528911129.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:32:09.384Z,1528911129.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:09.779Z,1528911129.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:32:09.780Z,1528911129.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:10.181Z,1528911130.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T17:32:10.182Z,1528911130.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:10.588Z,1528911130.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:10.985Z,1528911130.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:11.393Z,1528911131.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:11.794Z,1528911131.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:12.176Z,1528911132.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:12.580Z,1528911132.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:12.982Z,1528911132.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:13.382Z,1528911133.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:13.780Z,1528911133.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:14.193Z,1528911134.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:14.592Z,1528911134.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:14.988Z,1528911134.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:15.394Z,1528911135.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:15.784Z,1528911135.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:16.189Z,1528911136.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:16.589Z,1528911136.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:16.994Z,1528911136.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:17.401Z,1528911137.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:17.804Z,1528911137.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:18.170Z,1528911138.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:18.573Z,1528911138.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:18.998Z,1528911138.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:19.374Z,1528911139.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:19.805Z,1528911139.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:20.201Z,1528911140.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:20.587Z,1528911140.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:20.988Z,1528911140.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:21.380Z,1528911141.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:21.776Z,1528911141.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:22.179Z,1528911142.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:22.578Z,1528911142.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:22.985Z,1528911142.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:23.391Z,1528911143.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:23.784Z,1528911143.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:24.176Z,1528911144.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:24.580Z,1528911144.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:24.988Z,1528911144.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:25.387Z,1528911145.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:25.788Z,1528911145.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:26.180Z,1528911146.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:26.585Z,1528911146.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:26.943Z,1528911146.943 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T17:32:26.943Z,1528911146.943 [NAL9602] Data Fault, FailCount= 2
2018-06-13T17:32:26.943Z,1528911146.943 [NAL9602](ERROR): Data Fault
2018-06-13T17:32:26.996Z,1528911146.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:27.089Z,1528911147.089 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T17:32:27.338Z,1528911147.338 [NAL9602](INFO): Powering down
2018-06-13T17:32:27.385Z,1528911147.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:30.487Z,1528911150.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:30.664Z,1528911150.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:30.755Z,1528911150.755 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T17:32:30.755Z,1528911150.755 [NAL9602] No Fault, FailCount= 2
2018-06-13T17:32:31.044Z,1528911151.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:31.435Z,1528911151.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:31.837Z,1528911151.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:32.240Z,1528911152.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:32.631Z,1528911152.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:33.035Z,1528911153.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:33.435Z,1528911153.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:33.832Z,1528911153.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:34.235Z,1528911154.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:34.636Z,1528911154.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:35.031Z,1528911155.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:35.435Z,1528911155.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:35.834Z,1528911155.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:36.239Z,1528911156.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:36.637Z,1528911156.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:37.034Z,1528911157.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:37.431Z,1528911157.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:37.840Z,1528911157.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:38.240Z,1528911158.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:38.633Z,1528911158.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:39.035Z,1528911159.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:39.434Z,1528911159.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:39.836Z,1528911159.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:40.235Z,1528911160.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:40.639Z,1528911160.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:41.036Z,1528911161.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:41.435Z,1528911161.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:41.832Z,1528911161.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:42.239Z,1528911162.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:42.644Z,1528911162.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:43.033Z,1528911163.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:43.436Z,1528911163.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:43.836Z,1528911163.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:44.240Z,1528911164.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:44.637Z,1528911164.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:45.036Z,1528911165.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:45.438Z,1528911165.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:45.837Z,1528911165.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:46.237Z,1528911166.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:46.637Z,1528911166.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:47.036Z,1528911167.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:47.444Z,1528911167.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:47.833Z,1528911167.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:48.298Z,1528911168.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:48.636Z,1528911168.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:49.033Z,1528911169.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:49.437Z,1528911169.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:49.836Z,1528911169.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:50.244Z,1528911170.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:50.637Z,1528911170.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:51.037Z,1528911171.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:51.438Z,1528911171.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:51.840Z,1528911171.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:52.243Z,1528911172.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:52.634Z,1528911172.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:53.038Z,1528911173.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:53.437Z,1528911173.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:53.838Z,1528911173.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:54.239Z,1528911174.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:54.638Z,1528911174.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:55.044Z,1528911175.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:55.437Z,1528911175.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:55.833Z,1528911175.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:56.240Z,1528911176.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:56.637Z,1528911176.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:57.038Z,1528911177.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:57.390Z,1528911177.390 [NAL9602](INFO): Powering up NAL9602
2018-06-13T17:32:57.444Z,1528911177.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:57.836Z,1528911177.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:58.237Z,1528911178.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:58.637Z,1528911178.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:59.038Z,1528911179.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:59.436Z,1528911179.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:32:59.834Z,1528911179.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:00.237Z,1528911180.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:00.637Z,1528911180.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:01.034Z,1528911181.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:01.437Z,1528911181.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:01.839Z,1528911181.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:02.244Z,1528911182.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:02.644Z,1528911182.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:03.040Z,1528911183.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:03.412Z,1528911183.412 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:03.441Z,1528911183.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:03.806Z,1528911183.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:03.844Z,1528911183.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:04.212Z,1528911184.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:04.246Z,1528911184.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:04.605Z,1528911184.605 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:04.636Z,1528911184.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:05.006Z,1528911185.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:05.033Z,1528911185.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:05.411Z,1528911185.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:05.437Z,1528911185.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:05.810Z,1528911185.810 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:05.830Z,1528911185.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:06.215Z,1528911186.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:06.257Z,1528911186.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:06.614Z,1528911186.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:06.637Z,1528911186.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:07.014Z,1528911187.014 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:07.031Z,1528911187.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:07.410Z,1528911187.410 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:07.428Z,1528911187.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:07.825Z,1528911187.825 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:07.859Z,1528911187.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:08.198Z,1528911188.198 [NAL9602](INFO): NAL9602 initialized
2018-06-13T17:33:08.215Z,1528911188.215 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:08.233Z,1528911188.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:08.614Z,1528911188.614 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:08.632Z,1528911188.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:09.026Z,1528911189.026 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:33:09.043Z,1528911189.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:09.448Z,1528911189.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:09.840Z,1528911189.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:10.238Z,1528911190.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:10.642Z,1528911190.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:11.031Z,1528911191.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:11.447Z,1528911191.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:11.843Z,1528911191.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:12.240Z,1528911192.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:12.637Z,1528911192.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:13.046Z,1528911193.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:13.433Z,1528911193.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:13.837Z,1528911193.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:14.248Z,1528911194.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:14.643Z,1528911194.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:15.043Z,1528911195.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:15.448Z,1528911195.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:15.831Z,1528911195.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:16.243Z,1528911196.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:16.642Z,1528911196.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:17.033Z,1528911197.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:17.449Z,1528911197.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:17.849Z,1528911197.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:18.243Z,1528911198.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:18.644Z,1528911198.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:19.047Z,1528911199.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:19.434Z,1528911199.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:19.838Z,1528911199.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:20.256Z,1528911200.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:20.645Z,1528911200.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:21.051Z,1528911201.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:21.445Z,1528911201.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:21.837Z,1528911201.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:22.248Z,1528911202.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:22.642Z,1528911202.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:23.045Z,1528911203.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:23.452Z,1528911203.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:23.853Z,1528911203.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:24.247Z,1528911204.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:24.633Z,1528911204.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:25.032Z,1528911205.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:25.428Z,1528911205.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:25.836Z,1528911205.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:26.259Z,1528911206.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:26.651Z,1528911206.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:26.658Z,1528911206.658 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T17:33:26.658Z,1528911206.658 [Default:CheckIn:C.Wait] Stopped
2018-06-13T17:33:26.658Z,1528911206.658 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T17:33:26.658Z,1528911206.658 [Default:CheckIn:D] Running Loop=1
2018-06-13T17:33:27.063Z,1528911207.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:27.066Z,1528911207.066 [Default:CheckIn:D] Stopped
2018-06-13T17:33:27.066Z,1528911207.066 [Default:CheckIn:E] Running Loop=1
2018-06-13T17:33:27.435Z,1528911207.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:27.439Z,1528911207.439 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 846.227018 min 
2018-06-13T17:33:27.439Z,1528911207.439 [Default:CheckIn:E] Stopped
2018-06-13T17:33:27.439Z,1528911207.439 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T17:33:27.439Z,1528911207.439 [Default:CheckIn] Stopped
2018-06-13T17:33:27.439Z,1528911207.439 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T17:33:27.439Z,1528911207.439 [Default:CheckIn](INFO): Running loop #82
2018-06-13T17:33:27.440Z,1528911207.440 [Default:CheckIn] Running Loop=82
2018-06-13T17:33:27.440Z,1528911207.440 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T17:33:27.440Z,1528911207.440 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T17:33:30.543Z,1528911210.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:30.714Z,1528911210.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:31.122Z,1528911211.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:31.518Z,1528911211.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:31.917Z,1528911211.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:32.313Z,1528911212.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:32.696Z,1528911212.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:33.120Z,1528911213.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:33.520Z,1528911213.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:33.919Z,1528911213.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:34.297Z,1528911214.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:34.714Z,1528911214.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:35.120Z,1528911215.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:35.510Z,1528911215.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:35.931Z,1528911215.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:36.304Z,1528911216.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:36.702Z,1528911216.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:37.108Z,1528911217.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:37.507Z,1528911217.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:37.911Z,1528911217.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:38.304Z,1528911218.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:38.703Z,1528911218.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:39.107Z,1528911219.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:39.511Z,1528911219.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:39.908Z,1528911219.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:40.302Z,1528911220.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:40.703Z,1528911220.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:41.108Z,1528911221.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:41.511Z,1528911221.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:41.909Z,1528911221.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:42.303Z,1528911222.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:42.704Z,1528911222.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:43.108Z,1528911223.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:43.511Z,1528911223.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:43.907Z,1528911223.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:44.306Z,1528911224.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:44.701Z,1528911224.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:45.107Z,1528911225.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:45.511Z,1528911225.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:45.907Z,1528911225.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:46.308Z,1528911226.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:46.703Z,1528911226.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:47.107Z,1528911227.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:47.511Z,1528911227.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:47.907Z,1528911227.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:48.311Z,1528911228.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:48.710Z,1528911228.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:49.113Z,1528911229.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:49.514Z,1528911229.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:49.916Z,1528911229.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:50.313Z,1528911230.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:50.704Z,1528911230.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:51.116Z,1528911231.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:51.519Z,1528911231.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:51.905Z,1528911231.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:52.318Z,1528911232.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:52.713Z,1528911232.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:53.117Z,1528911233.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:53.504Z,1528911233.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:53.916Z,1528911233.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:54.311Z,1528911234.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:54.705Z,1528911234.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:55.112Z,1528911235.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:55.513Z,1528911235.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:55.917Z,1528911235.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:56.314Z,1528911236.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:56.712Z,1528911236.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:57.114Z,1528911237.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:57.512Z,1528911237.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:57.915Z,1528911237.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:58.318Z,1528911238.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:58.715Z,1528911238.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:59.120Z,1528911239.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:59.508Z,1528911239.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:33:59.911Z,1528911239.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:00.317Z,1528911240.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:00.705Z,1528911240.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:01.120Z,1528911241.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:01.521Z,1528911241.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:01.924Z,1528911241.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:02.316Z,1528911242.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:02.696Z,1528911242.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:03.117Z,1528911243.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:03.500Z,1528911243.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:03.896Z,1528911243.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:04.326Z,1528911244.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:04.724Z,1528911244.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:05.124Z,1528911245.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:05.496Z,1528911245.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:05.924Z,1528911245.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:06.299Z,1528911246.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:06.704Z,1528911246.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:07.100Z,1528911247.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:07.523Z,1528911247.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:07.911Z,1528911247.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:08.312Z,1528911248.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:08.703Z,1528911248.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:09.102Z,1528911249.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:09.502Z,1528911249.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:09.902Z,1528911249.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:10.307Z,1528911250.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:10.711Z,1528911250.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:11.111Z,1528911251.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:11.502Z,1528911251.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:11.908Z,1528911251.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:12.302Z,1528911252.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:12.702Z,1528911252.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:13.108Z,1528911253.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:13.511Z,1528911253.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:13.911Z,1528911253.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:14.307Z,1528911254.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:14.704Z,1528911254.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:15.102Z,1528911255.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:15.504Z,1528911255.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:15.899Z,1528911255.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:16.307Z,1528911256.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:16.711Z,1528911256.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:17.107Z,1528911257.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:17.505Z,1528911257.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:17.902Z,1528911257.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:18.302Z,1528911258.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:18.703Z,1528911258.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:19.118Z,1528911259.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:19.514Z,1528911259.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:19.916Z,1528911259.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:20.313Z,1528911260.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:20.700Z,1528911260.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:21.104Z,1528911261.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:21.512Z,1528911261.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:21.903Z,1528911261.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:22.315Z,1528911262.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:22.715Z,1528911262.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:23.116Z,1528911263.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:23.505Z,1528911263.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:23.903Z,1528911263.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:24.310Z,1528911264.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:24.715Z,1528911264.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:25.117Z,1528911265.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:25.515Z,1528911265.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:25.928Z,1528911265.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:26.318Z,1528911266.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:26.717Z,1528911266.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:27.111Z,1528911267.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:27.510Z,1528911267.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:30.619Z,1528911270.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:30.784Z,1528911270.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:31.164Z,1528911271.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:31.561Z,1528911271.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:31.955Z,1528911271.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:32.359Z,1528911272.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:32.750Z,1528911272.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:33.159Z,1528911273.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:33.562Z,1528911273.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:33.967Z,1528911273.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:34.361Z,1528911274.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:34.740Z,1528911274.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:35.140Z,1528911275.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:35.541Z,1528911275.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:35.944Z,1528911275.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:36.370Z,1528911276.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:36.769Z,1528911276.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:37.171Z,1528911277.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:37.539Z,1528911277.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:37.944Z,1528911277.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:38.343Z,1528911278.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:38.740Z,1528911278.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:39.143Z,1528911279.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:39.569Z,1528911279.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:39.970Z,1528911279.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:40.368Z,1528911280.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:40.739Z,1528911280.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:41.139Z,1528911281.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:41.548Z,1528911281.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:41.943Z,1528911281.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:42.363Z,1528911282.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:42.772Z,1528911282.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:43.156Z,1528911283.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:43.543Z,1528911283.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:43.943Z,1528911283.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:44.343Z,1528911284.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:44.745Z,1528911284.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:45.143Z,1528911285.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:45.555Z,1528911285.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:45.955Z,1528911285.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:46.351Z,1528911286.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:46.745Z,1528911286.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:47.146Z,1528911287.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:47.547Z,1528911287.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:47.945Z,1528911287.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:48.355Z,1528911288.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:48.755Z,1528911288.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:49.151Z,1528911289.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:49.546Z,1528911289.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:49.945Z,1528911289.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:50.344Z,1528911290.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:50.747Z,1528911290.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:51.152Z,1528911291.152 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:51.152Z,1528911291.152 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 282
2018-06-13T17:34:51.152Z,1528911291.152 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:34:51.154Z,1528911291.154 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:51.154Z,1528911291.154 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 282
2018-06-13T17:34:51.154Z,1528911291.154 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:34:51.156Z,1528911291.156 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:51.156Z,1528911291.156 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 282
2018-06-13T17:34:51.156Z,1528911291.156 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:34:51.253Z,1528911291.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:34:51.253Z,1528911291.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:34:51.254Z,1528911291.254 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:34:51.625Z,1528911291.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:34:51.625Z,1528911291.625 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 282
2018-06-13T17:34:51.625Z,1528911291.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:34:51.626Z,1528911291.626 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 282
2018-06-13T17:34:51.626Z,1528911291.626 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:34:51.626Z,1528911291.626 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 282
2018-06-13T17:34:51.951Z,1528911291.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:34:51.951Z,1528911291.951 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:34:51.951Z,1528911291.951 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:34:51.952Z,1528911291.952 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:34:51.952Z,1528911291.952 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:34:51.952Z,1528911291.952 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:34:51.953Z,1528911291.953 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:34:51.953Z,1528911291.953 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:34:51.954Z,1528911291.954 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:34:52.357Z,1528911292.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:34:52.358Z,1528911292.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:52.746Z,1528911292.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:34:52.747Z,1528911292.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:53.145Z,1528911293.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:34:53.146Z,1528911293.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:53.548Z,1528911293.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:34:53.550Z,1528911293.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:53.945Z,1528911293.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:34:53.946Z,1528911293.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:54.361Z,1528911294.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:34:54.362Z,1528911294.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:54.759Z,1528911294.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:34:54.759Z,1528911294.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:55.163Z,1528911295.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:34:55.164Z,1528911295.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:55.547Z,1528911295.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:34:55.548Z,1528911295.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:55.948Z,1528911295.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:34:55.949Z,1528911295.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:56.346Z,1528911296.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:34:56.347Z,1528911296.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:56.748Z,1528911296.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:34:56.749Z,1528911296.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:57.148Z,1528911297.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:34:57.149Z,1528911297.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:57.557Z,1528911297.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:34:57.558Z,1528911297.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:57.961Z,1528911297.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:34:57.962Z,1528911297.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:58.358Z,1528911298.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:34:58.359Z,1528911298.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:58.747Z,1528911298.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:34:58.748Z,1528911298.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:59.151Z,1528911299.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:34:59.152Z,1528911299.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:59.549Z,1528911299.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:34:59.550Z,1528911299.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:34:59.951Z,1528911299.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:34:59.952Z,1528911299.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:00.368Z,1528911300.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:35:00.385Z,1528911300.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:00.764Z,1528911300.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:35:00.765Z,1528911300.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:01.176Z,1528911301.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:35:01.177Z,1528911301.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:01.550Z,1528911301.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:35:01.551Z,1528911301.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:01.951Z,1528911301.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:35:01.952Z,1528911301.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:02.347Z,1528911302.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:35:02.348Z,1528911302.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:02.745Z,1528911302.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:35:02.746Z,1528911302.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:03.148Z,1528911303.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:35:03.150Z,1528911303.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:03.557Z,1528911303.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:35:03.558Z,1528911303.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:03.968Z,1528911303.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:35:03.989Z,1528911303.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:04.357Z,1528911304.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:35:04.358Z,1528911304.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:04.751Z,1528911304.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:35:04.752Z,1528911304.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:05.147Z,1528911305.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:35:05.148Z,1528911305.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:05.548Z,1528911305.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:35:05.550Z,1528911305.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:05.951Z,1528911305.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:35:05.952Z,1528911305.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:06.368Z,1528911306.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:35:06.385Z,1528911306.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:06.764Z,1528911306.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:35:06.765Z,1528911306.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:07.164Z,1528911307.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:35:07.165Z,1528911307.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:07.548Z,1528911307.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:35:07.549Z,1528911307.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:07.948Z,1528911307.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:35:07.949Z,1528911307.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:08.361Z,1528911308.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:35:08.362Z,1528911308.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:08.756Z,1528911308.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:35:08.756Z,1528911308.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:09.158Z,1528911309.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:35:09.159Z,1528911309.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:09.559Z,1528911309.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:35:09.560Z,1528911309.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:09.962Z,1528911309.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:35:09.963Z,1528911309.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:10.359Z,1528911310.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:35:10.360Z,1528911310.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:10.764Z,1528911310.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:35:10.769Z,1528911310.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:11.160Z,1528911311.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:11.558Z,1528911311.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:11.964Z,1528911311.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:12.365Z,1528911312.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:12.771Z,1528911312.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:13.163Z,1528911313.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:13.562Z,1528911313.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:13.948Z,1528911313.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:14.346Z,1528911314.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:14.753Z,1528911314.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:15.148Z,1528911315.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:15.571Z,1528911315.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:15.957Z,1528911315.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:16.357Z,1528911316.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:16.756Z,1528911316.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:17.156Z,1528911317.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:17.550Z,1528911317.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:17.948Z,1528911317.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:18.362Z,1528911318.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:18.756Z,1528911318.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:19.168Z,1528911319.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:19.553Z,1528911319.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:19.952Z,1528911319.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:20.364Z,1528911320.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:20.737Z,1528911320.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:21.140Z,1528911321.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:21.561Z,1528911321.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:21.966Z,1528911321.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:22.360Z,1528911322.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:22.763Z,1528911322.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:23.137Z,1528911323.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:23.557Z,1528911323.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:23.940Z,1528911323.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:24.368Z,1528911324.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:24.763Z,1528911324.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:25.167Z,1528911325.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:25.540Z,1528911325.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:25.944Z,1528911325.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:26.340Z,1528911326.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:26.761Z,1528911326.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:27.141Z,1528911327.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:27.567Z,1528911327.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:30.682Z,1528911330.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:30.844Z,1528911330.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:31.225Z,1528911331.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:31.652Z,1528911331.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:32.024Z,1528911332.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:32.431Z,1528911332.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:32.827Z,1528911332.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:33.231Z,1528911333.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:33.632Z,1528911333.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:34.004Z,1528911334.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:34.407Z,1528911334.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:34.812Z,1528911334.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:35.207Z,1528911335.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:35.635Z,1528911335.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:36.035Z,1528911336.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:36.419Z,1528911336.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:36.810Z,1528911336.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:37.217Z,1528911337.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:37.611Z,1528911337.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:38.010Z,1528911338.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:38.415Z,1528911338.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:38.819Z,1528911338.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:39.219Z,1528911339.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:39.608Z,1528911339.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:40.011Z,1528911340.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:40.409Z,1528911340.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:40.811Z,1528911340.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:41.207Z,1528911341.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:41.615Z,1528911341.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:42.019Z,1528911342.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:42.419Z,1528911342.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:42.811Z,1528911342.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:43.217Z,1528911343.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:43.616Z,1528911343.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:44.010Z,1528911344.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:44.416Z,1528911344.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:44.819Z,1528911344.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:45.220Z,1528911345.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:45.612Z,1528911345.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:46.011Z,1528911346.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:46.412Z,1528911346.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:46.811Z,1528911346.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:47.211Z,1528911347.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:47.619Z,1528911347.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:48.020Z,1528911348.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:48.424Z,1528911348.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:48.811Z,1528911348.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:49.210Z,1528911349.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:49.612Z,1528911349.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:50.011Z,1528911350.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:50.416Z,1528911350.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:50.842Z,1528911350.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:51.219Z,1528911351.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:51.614Z,1528911351.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:52.012Z,1528911352.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:52.408Z,1528911352.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:52.825Z,1528911352.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:53.214Z,1528911353.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:53.621Z,1528911353.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:54.028Z,1528911354.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:54.427Z,1528911354.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:54.813Z,1528911354.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:55.215Z,1528911355.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:55.619Z,1528911355.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:56.020Z,1528911356.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:56.423Z,1528911356.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:56.823Z,1528911356.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:57.226Z,1528911357.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:57.624Z,1528911357.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:58.014Z,1528911358.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:58.412Z,1528911358.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:58.824Z,1528911358.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:59.219Z,1528911359.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:35:59.620Z,1528911359.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:00.026Z,1528911360.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:00.421Z,1528911360.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:00.812Z,1528911360.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:01.224Z,1528911361.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:01.614Z,1528911361.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:02.015Z,1528911362.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:02.421Z,1528911362.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:02.825Z,1528911362.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:03.221Z,1528911363.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:03.623Z,1528911363.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:04.026Z,1528911364.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:04.412Z,1528911364.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:04.815Z,1528911364.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:05.213Z,1528911365.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:05.620Z,1528911365.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:06.026Z,1528911366.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:06.425Z,1528911366.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:06.812Z,1528911366.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:07.214Z,1528911367.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:07.614Z,1528911367.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:08.012Z,1528911368.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:08.421Z,1528911368.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:08.822Z,1528911368.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:09.220Z,1528911369.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:09.623Z,1528911369.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:10.013Z,1528911370.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:10.412Z,1528911370.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:10.816Z,1528911370.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:11.213Z,1528911371.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:11.621Z,1528911371.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:12.025Z,1528911372.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:12.425Z,1528911372.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:12.813Z,1528911372.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:13.214Z,1528911373.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:13.615Z,1528911373.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:14.012Z,1528911374.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:14.421Z,1528911374.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:14.825Z,1528911374.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:15.227Z,1528911375.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:15.624Z,1528911375.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:16.013Z,1528911376.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:16.414Z,1528911376.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:16.815Z,1528911376.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:17.213Z,1528911377.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:17.622Z,1528911377.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:18.025Z,1528911378.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:18.428Z,1528911378.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:18.812Z,1528911378.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:19.214Z,1528911379.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:19.614Z,1528911379.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:20.012Z,1528911380.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:20.423Z,1528911380.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:20.825Z,1528911380.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:21.311Z,1528911381.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:21.614Z,1528911381.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:22.013Z,1528911382.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:22.413Z,1528911382.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:22.815Z,1528911382.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:23.218Z,1528911383.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:23.625Z,1528911383.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:24.029Z,1528911384.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:24.422Z,1528911384.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:24.813Z,1528911384.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:25.228Z,1528911385.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:25.615Z,1528911385.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:26.020Z,1528911386.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:26.422Z,1528911386.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:26.825Z,1528911386.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:27.226Z,1528911387.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:27.624Z,1528911387.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:30.722Z,1528911390.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:30.864Z,1528911390.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:31.275Z,1528911391.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:31.667Z,1528911391.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:32.066Z,1528911392.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:32.464Z,1528911392.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:32.865Z,1528911392.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:33.248Z,1528911393.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:33.676Z,1528911393.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:34.072Z,1528911394.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:34.474Z,1528911394.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:34.872Z,1528911394.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:35.243Z,1528911395.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:35.649Z,1528911395.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:36.049Z,1528911396.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:36.455Z,1528911396.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:36.876Z,1528911396.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:37.275Z,1528911397.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:37.648Z,1528911397.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:38.052Z,1528911398.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:38.448Z,1528911398.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:38.847Z,1528911398.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:39.248Z,1528911399.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:39.660Z,1528911399.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:40.055Z,1528911400.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:40.460Z,1528911400.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:40.850Z,1528911400.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:41.248Z,1528911401.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:41.651Z,1528911401.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:42.052Z,1528911402.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:42.454Z,1528911402.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:42.859Z,1528911402.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:43.256Z,1528911403.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:43.648Z,1528911403.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:44.049Z,1528911404.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:44.449Z,1528911404.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:44.848Z,1528911404.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:45.252Z,1528911405.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:45.655Z,1528911405.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:46.055Z,1528911406.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:46.455Z,1528911406.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:46.849Z,1528911406.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:47.247Z,1528911407.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:47.650Z,1528911407.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:48.048Z,1528911408.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:48.458Z,1528911408.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:48.859Z,1528911408.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:49.260Z,1528911409.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:49.647Z,1528911409.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:50.049Z,1528911410.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:50.450Z,1528911410.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:50.848Z,1528911410.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:51.259Z,1528911411.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:51.655Z,1528911411.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:52.059Z,1528911412.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:52.460Z,1528911412.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:52.849Z,1528911412.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:53.250Z,1528911413.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:53.649Z,1528911413.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:54.049Z,1528911414.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:54.455Z,1528911414.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:54.859Z,1528911414.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:55.255Z,1528911415.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:55.651Z,1528911415.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:56.050Z,1528911416.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:56.455Z,1528911416.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:56.859Z,1528911416.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:57.260Z,1528911417.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:57.650Z,1528911417.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:58.052Z,1528911418.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:58.459Z,1528911418.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:58.858Z,1528911418.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:59.263Z,1528911419.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:36:59.651Z,1528911419.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:00.051Z,1528911420.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:00.459Z,1528911420.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:00.858Z,1528911420.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:01.260Z,1528911421.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:01.651Z,1528911421.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:02.052Z,1528911422.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:02.460Z,1528911422.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:02.859Z,1528911422.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:03.260Z,1528911423.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:03.663Z,1528911423.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:04.053Z,1528911424.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:04.460Z,1528911424.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:04.863Z,1528911424.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:05.259Z,1528911425.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:05.651Z,1528911425.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:06.054Z,1528911426.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:06.459Z,1528911426.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:06.859Z,1528911426.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:07.256Z,1528911427.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:07.653Z,1528911427.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:08.052Z,1528911428.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:08.468Z,1528911428.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:08.866Z,1528911428.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:09.263Z,1528911429.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:09.656Z,1528911429.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:10.052Z,1528911430.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:10.461Z,1528911430.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:10.865Z,1528911430.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:11.268Z,1528911431.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:11.660Z,1528911431.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:12.054Z,1528911432.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:12.465Z,1528911432.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:12.863Z,1528911432.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:13.268Z,1528911433.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:13.654Z,1528911433.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:14.052Z,1528911434.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:14.463Z,1528911434.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:14.865Z,1528911434.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:15.260Z,1528911435.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:15.658Z,1528911435.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:16.053Z,1528911436.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:16.469Z,1528911436.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:16.866Z,1528911436.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:17.268Z,1528911437.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:17.660Z,1528911437.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:18.064Z,1528911438.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:18.464Z,1528911438.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:18.865Z,1528911438.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:19.260Z,1528911439.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:19.654Z,1528911439.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:20.052Z,1528911440.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:20.463Z,1528911440.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:20.862Z,1528911440.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:21.262Z,1528911441.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:21.663Z,1528911441.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:22.060Z,1528911442.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:22.461Z,1528911442.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:22.865Z,1528911442.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:23.264Z,1528911443.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:23.653Z,1528911443.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:24.052Z,1528911444.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:24.466Z,1528911444.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:24.865Z,1528911444.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:25.276Z,1528911445.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:25.661Z,1528911445.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:26.044Z,1528911446.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:26.465Z,1528911446.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:26.871Z,1528911446.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:27.272Z,1528911447.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:27.667Z,1528911447.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:30.765Z,1528911450.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:30.923Z,1528911450.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:31.326Z,1528911451.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:31.722Z,1528911451.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:32.118Z,1528911452.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:32.527Z,1528911452.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:32.918Z,1528911452.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:33.324Z,1528911453.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:33.727Z,1528911453.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:34.120Z,1528911454.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:34.518Z,1528911454.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:34.921Z,1528911454.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:35.300Z,1528911455.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:35.701Z,1528911455.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:36.124Z,1528911456.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:36.531Z,1528911456.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:36.926Z,1528911456.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:37.331Z,1528911457.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:37.704Z,1528911457.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:38.105Z,1528911458.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:38.531Z,1528911458.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:38.927Z,1528911458.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:39.331Z,1528911459.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:39.704Z,1528911459.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:40.102Z,1528911460.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:40.531Z,1528911460.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:40.931Z,1528911460.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:41.315Z,1528911461.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:41.707Z,1528911461.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:42.107Z,1528911462.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:42.511Z,1528911462.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:42.916Z,1528911462.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:43.312Z,1528911463.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:43.707Z,1528911463.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:44.108Z,1528911464.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:44.512Z,1528911464.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:44.912Z,1528911464.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:45.311Z,1528911465.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:45.708Z,1528911465.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:46.104Z,1528911466.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:46.511Z,1528911466.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:46.915Z,1528911466.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:47.311Z,1528911467.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:47.711Z,1528911467.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:48.106Z,1528911468.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:48.511Z,1528911468.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:48.915Z,1528911468.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:49.312Z,1528911469.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:49.709Z,1528911469.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:50.108Z,1528911470.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:50.512Z,1528911470.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:50.911Z,1528911470.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:51.311Z,1528911471.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:51.706Z,1528911471.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:52.104Z,1528911472.104 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:52.104Z,1528911472.104 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 283
2018-06-13T17:37:52.104Z,1528911472.104 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:37:52.106Z,1528911472.106 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:52.106Z,1528911472.106 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 283
2018-06-13T17:37:52.106Z,1528911472.106 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:37:52.108Z,1528911472.108 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:52.108Z,1528911472.108 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 283
2018-06-13T17:37:52.108Z,1528911472.108 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:37:52.181Z,1528911472.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:37:52.182Z,1528911472.182 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:37:52.182Z,1528911472.182 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:37:52.589Z,1528911472.589 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:37:52.589Z,1528911472.589 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 283
2018-06-13T17:37:52.590Z,1528911472.590 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:37:52.590Z,1528911472.590 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 283
2018-06-13T17:37:52.590Z,1528911472.590 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:37:52.590Z,1528911472.590 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 283
2018-06-13T17:37:52.915Z,1528911472.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:37:52.916Z,1528911472.916 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:37:52.916Z,1528911472.916 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:37:52.916Z,1528911472.916 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:37:52.917Z,1528911472.917 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:37:52.917Z,1528911472.917 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:37:52.918Z,1528911472.918 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:37:52.918Z,1528911472.918 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:37:52.918Z,1528911472.918 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:37:53.313Z,1528911473.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:37:53.314Z,1528911473.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:53.707Z,1528911473.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:37:53.708Z,1528911473.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:54.110Z,1528911474.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:37:54.111Z,1528911474.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:54.518Z,1528911474.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:37:54.519Z,1528911474.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:54.924Z,1528911474.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:37:54.925Z,1528911474.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:55.317Z,1528911475.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:37:55.318Z,1528911475.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:55.713Z,1528911475.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:37:55.714Z,1528911475.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:56.108Z,1528911476.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:37:56.109Z,1528911476.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:56.518Z,1528911476.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:37:56.519Z,1528911476.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:56.917Z,1528911476.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:37:56.918Z,1528911476.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:57.322Z,1528911477.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:37:57.323Z,1528911477.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:57.710Z,1528911477.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:37:57.711Z,1528911477.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:58.120Z,1528911478.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:37:58.121Z,1528911478.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:58.517Z,1528911478.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:37:58.518Z,1528911478.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:58.920Z,1528911478.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:37:58.922Z,1528911478.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:59.319Z,1528911479.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:37:59.320Z,1528911479.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:37:59.716Z,1528911479.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:37:59.717Z,1528911479.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:00.116Z,1528911480.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:38:00.117Z,1528911480.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:00.519Z,1528911480.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:38:00.520Z,1528911480.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:00.920Z,1528911480.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:38:00.921Z,1528911480.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:01.324Z,1528911481.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:38:01.325Z,1528911481.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:01.712Z,1528911481.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:38:01.713Z,1528911481.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:02.112Z,1528911482.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:38:02.113Z,1528911482.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:02.528Z,1528911482.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:38:02.533Z,1528911482.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:02.923Z,1528911482.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:38:02.924Z,1528911482.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:03.320Z,1528911483.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:38:03.321Z,1528911483.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:03.717Z,1528911483.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:38:03.718Z,1528911483.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:04.109Z,1528911484.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:38:04.110Z,1528911484.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:04.528Z,1528911484.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:38:04.529Z,1528911484.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:04.932Z,1528911484.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:38:04.937Z,1528911484.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:05.323Z,1528911485.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:38:05.324Z,1528911485.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:05.728Z,1528911485.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:38:05.729Z,1528911485.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:06.105Z,1528911486.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:38:06.106Z,1528911486.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:06.535Z,1528911486.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:38:06.536Z,1528911486.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:06.914Z,1528911486.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:38:06.915Z,1528911486.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:07.311Z,1528911487.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:38:07.312Z,1528911487.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:07.707Z,1528911487.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:38:07.708Z,1528911487.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:08.105Z,1528911488.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:38:08.106Z,1528911488.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:08.511Z,1528911488.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:38:08.512Z,1528911488.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:08.914Z,1528911488.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:38:08.915Z,1528911488.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:09.318Z,1528911489.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:38:09.319Z,1528911489.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:09.706Z,1528911489.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:38:09.707Z,1528911489.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:10.103Z,1528911490.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:38:10.104Z,1528911490.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:10.507Z,1528911490.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:38:10.508Z,1528911490.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:10.916Z,1528911490.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:38:10.917Z,1528911490.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:11.314Z,1528911491.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:38:11.315Z,1528911491.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:11.716Z,1528911491.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:38:11.717Z,1528911491.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:12.106Z,1528911492.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:12.506Z,1528911492.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:12.911Z,1528911492.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:13.310Z,1528911493.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:13.715Z,1528911493.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:14.115Z,1528911494.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:14.515Z,1528911494.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:14.903Z,1528911494.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:15.307Z,1528911495.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:15.720Z,1528911495.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:16.109Z,1528911496.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:16.511Z,1528911496.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:16.917Z,1528911496.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:17.318Z,1528911497.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:17.724Z,1528911497.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:18.111Z,1528911498.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:18.508Z,1528911498.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:18.911Z,1528911498.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:19.309Z,1528911499.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:19.721Z,1528911499.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:20.119Z,1528911500.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:20.524Z,1528911500.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:20.909Z,1528911500.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:21.311Z,1528911501.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:21.719Z,1528911501.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:22.110Z,1528911502.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:22.511Z,1528911502.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:22.928Z,1528911502.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:23.322Z,1528911503.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:23.730Z,1528911503.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:24.113Z,1528911504.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:24.511Z,1528911504.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:24.916Z,1528911504.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:25.316Z,1528911505.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:25.719Z,1528911505.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:26.127Z,1528911506.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:26.522Z,1528911506.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:26.914Z,1528911506.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:27.314Z,1528911507.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:27.714Z,1528911507.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:27.717Z,1528911507.717 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T17:33:27.4Z
2018-06-13T17:38:27.717Z,1528911507.717 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T17:38:27.718Z,1528911507.718 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T17:38:30.820Z,1528911510.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:31.856Z,1528911511.856 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0328.lzma
2018-06-13T17:38:31.912Z,1528911511.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:32.096Z,1528911512.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:32.414Z,1528911512.414 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0328.lzma.bak
2018-06-13T17:38:32.414Z,1528911512.414 [DataOverHttps](INFO): SBD MOMSN=8329639
2018-06-13T17:38:32.488Z,1528911512.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:34.376Z,1528911514.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:34.532Z,1528911514.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:34.928Z,1528911514.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:38.029Z,1528911518.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:38.184Z,1528911518.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:38.584Z,1528911518.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:38.986Z,1528911518.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:39.368Z,1528911519.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:39.779Z,1528911519.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:40.180Z,1528911520.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:40.582Z,1528911520.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:40.986Z,1528911520.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:41.381Z,1528911521.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:41.777Z,1528911521.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:42.184Z,1528911522.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:42.585Z,1528911522.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:42.986Z,1528911522.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:43.386Z,1528911523.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:46.483Z,1528911526.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:46.624Z,1528911526.624 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0329.lzma
2018-06-13T17:38:46.678Z,1528911526.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:47.085Z,1528911527.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:47.419Z,1528911527.419 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0329.lzma.bak
2018-06-13T17:38:47.420Z,1528911527.420 [DataOverHttps](INFO): SBD MOMSN=8329641
2018-06-13T17:38:47.498Z,1528911527.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:49.355Z,1528911529.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:49.358Z,1528911529.358 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T17:38:49.358Z,1528911529.358 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T17:38:49.358Z,1528911529.358 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T17:38:49.526Z,1528911529.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:49.903Z,1528911529.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:53.084Z,1528911533.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:53.261Z,1528911533.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:53.644Z,1528911533.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:54.042Z,1528911534.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:54.428Z,1528911534.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:54.840Z,1528911534.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:55.216Z,1528911535.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:55.646Z,1528911535.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:56.051Z,1528911536.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:56.446Z,1528911536.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:56.822Z,1528911536.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:57.240Z,1528911537.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:57.631Z,1528911537.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:58.054Z,1528911538.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:58.432Z,1528911538.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:58.825Z,1528911538.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:59.226Z,1528911539.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:38:59.632Z,1528911539.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:00.031Z,1528911540.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:00.431Z,1528911540.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:00.827Z,1528911540.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:01.224Z,1528911541.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:01.635Z,1528911541.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:02.036Z,1528911542.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:02.431Z,1528911542.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:02.826Z,1528911542.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:03.232Z,1528911543.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:03.631Z,1528911543.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:04.031Z,1528911544.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:04.431Z,1528911544.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:04.824Z,1528911544.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:05.225Z,1528911545.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:05.632Z,1528911545.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:06.032Z,1528911546.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:06.435Z,1528911546.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:06.828Z,1528911546.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:07.223Z,1528911547.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:07.635Z,1528911547.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:08.035Z,1528911548.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:08.434Z,1528911548.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:08.828Z,1528911548.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:09.238Z,1528911549.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:09.634Z,1528911549.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:10.035Z,1528911550.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:10.433Z,1528911550.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:10.825Z,1528911550.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:11.232Z,1528911551.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:11.632Z,1528911551.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:12.034Z,1528911552.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:12.436Z,1528911552.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:12.837Z,1528911552.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:13.226Z,1528911553.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:13.637Z,1528911553.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:14.036Z,1528911554.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:14.437Z,1528911554.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:14.828Z,1528911554.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:15.239Z,1528911555.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:15.638Z,1528911555.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:16.041Z,1528911556.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:16.440Z,1528911556.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:16.825Z,1528911556.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:17.235Z,1528911557.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:17.636Z,1528911557.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:18.038Z,1528911558.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:18.440Z,1528911558.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:18.832Z,1528911558.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:19.237Z,1528911559.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:19.637Z,1528911559.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:20.042Z,1528911560.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:20.438Z,1528911560.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:20.833Z,1528911560.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:21.236Z,1528911561.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:21.638Z,1528911561.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:22.042Z,1528911562.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:22.437Z,1528911562.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:22.834Z,1528911562.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:23.236Z,1528911563.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:23.646Z,1528911563.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:24.041Z,1528911564.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:24.438Z,1528911564.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:24.843Z,1528911564.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:25.217Z,1528911565.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:25.643Z,1528911565.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:26.053Z,1528911566.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:26.439Z,1528911566.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:26.834Z,1528911566.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:27.221Z,1528911567.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:27.639Z,1528911567.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:28.046Z,1528911568.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:28.456Z,1528911568.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:28.825Z,1528911568.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:29.223Z,1528911569.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:29.647Z,1528911569.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:30.046Z,1528911570.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:30.435Z,1528911570.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:30.824Z,1528911570.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:31.223Z,1528911571.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:31.698Z,1528911571.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:32.100Z,1528911572.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:32.497Z,1528911572.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:32.988Z,1528911572.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:33.357Z,1528911573.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:33.718Z,1528911573.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:34.025Z,1528911574.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:34.425Z,1528911574.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:34.843Z,1528911574.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:35.252Z,1528911575.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:35.652Z,1528911575.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:36.024Z,1528911576.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:36.453Z,1528911576.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:36.828Z,1528911576.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:37.224Z,1528911577.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:37.628Z,1528911577.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:38.035Z,1528911578.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:38.432Z,1528911578.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:38.832Z,1528911578.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:39.245Z,1528911579.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:39.624Z,1528911579.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:40.026Z,1528911580.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:40.427Z,1528911580.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:40.831Z,1528911580.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:41.235Z,1528911581.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:41.632Z,1528911581.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:42.023Z,1528911582.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:42.425Z,1528911582.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:42.826Z,1528911582.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:43.225Z,1528911583.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:43.625Z,1528911583.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:44.032Z,1528911584.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:44.432Z,1528911584.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:44.835Z,1528911584.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:45.228Z,1528911585.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:45.623Z,1528911585.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:46.028Z,1528911586.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:46.430Z,1528911586.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:46.832Z,1528911586.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:47.236Z,1528911587.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:47.632Z,1528911587.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:48.028Z,1528911588.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:48.428Z,1528911588.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:48.838Z,1528911588.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:49.228Z,1528911589.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:49.631Z,1528911589.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:50.040Z,1528911590.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:53.166Z,1528911593.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:53.336Z,1528911593.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:53.718Z,1528911593.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:54.106Z,1528911594.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:54.492Z,1528911594.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:54.920Z,1528911594.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:55.320Z,1528911595.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:55.715Z,1528911595.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:56.110Z,1528911596.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:56.497Z,1528911596.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:56.913Z,1528911596.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:57.300Z,1528911597.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:57.723Z,1528911597.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:58.108Z,1528911598.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:58.531Z,1528911598.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:58.902Z,1528911598.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:59.311Z,1528911599.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:39:59.705Z,1528911599.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:00.108Z,1528911600.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:00.508Z,1528911600.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:00.910Z,1528911600.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:01.300Z,1528911601.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:01.708Z,1528911601.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:02.112Z,1528911602.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:02.511Z,1528911602.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:02.902Z,1528911602.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:03.301Z,1528911603.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:03.707Z,1528911603.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:04.112Z,1528911604.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:04.512Z,1528911604.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:04.900Z,1528911604.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:05.302Z,1528911605.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:05.712Z,1528911605.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:06.107Z,1528911606.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:06.552Z,1528911606.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:06.900Z,1528911606.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:07.299Z,1528911607.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:07.708Z,1528911607.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:08.110Z,1528911608.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:08.511Z,1528911608.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:08.902Z,1528911608.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:09.311Z,1528911609.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:09.712Z,1528911609.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:10.111Z,1528911610.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:10.512Z,1528911610.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:10.903Z,1528911610.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:11.301Z,1528911611.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:11.706Z,1528911611.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:12.107Z,1528911612.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:12.511Z,1528911612.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:12.901Z,1528911612.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:13.300Z,1528911613.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:13.707Z,1528911613.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:14.112Z,1528911614.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:14.508Z,1528911614.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:14.902Z,1528911614.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:15.302Z,1528911615.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:15.710Z,1528911615.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:16.116Z,1528911616.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:16.507Z,1528911616.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:16.903Z,1528911616.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:17.303Z,1528911617.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:17.702Z,1528911617.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:18.111Z,1528911618.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:18.516Z,1528911618.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:18.912Z,1528911618.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:19.304Z,1528911619.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:19.702Z,1528911619.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:20.103Z,1528911620.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:20.503Z,1528911620.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:20.907Z,1528911620.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:21.311Z,1528911621.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:21.716Z,1528911621.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:22.104Z,1528911622.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:22.501Z,1528911622.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:22.904Z,1528911622.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:23.304Z,1528911623.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:23.715Z,1528911623.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:24.112Z,1528911624.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:24.516Z,1528911624.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:24.908Z,1528911624.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:25.304Z,1528911625.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:25.702Z,1528911625.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:26.104Z,1528911626.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:26.511Z,1528911626.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:26.908Z,1528911626.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:27.312Z,1528911627.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:27.716Z,1528911627.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:28.104Z,1528911628.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:28.504Z,1528911628.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:28.904Z,1528911628.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:29.302Z,1528911629.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:29.702Z,1528911629.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:30.116Z,1528911630.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:30.516Z,1528911630.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:30.908Z,1528911630.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:31.303Z,1528911631.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:31.702Z,1528911631.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:32.102Z,1528911632.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:32.502Z,1528911632.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:32.908Z,1528911632.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:33.316Z,1528911633.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:33.716Z,1528911633.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:34.103Z,1528911634.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:34.504Z,1528911634.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:34.906Z,1528911634.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:35.303Z,1528911635.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:35.710Z,1528911635.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:36.120Z,1528911636.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:36.523Z,1528911636.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:36.920Z,1528911636.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:37.300Z,1528911637.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:37.706Z,1528911637.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:38.109Z,1528911638.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:38.502Z,1528911638.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:38.916Z,1528911638.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:39.320Z,1528911639.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:39.713Z,1528911639.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:40.104Z,1528911640.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:40.516Z,1528911640.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:40.899Z,1528911640.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:41.304Z,1528911641.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:41.705Z,1528911641.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:42.114Z,1528911642.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:42.516Z,1528911642.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:42.912Z,1528911642.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:43.299Z,1528911643.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:43.702Z,1528911643.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:44.106Z,1528911644.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:44.503Z,1528911644.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:44.916Z,1528911644.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:45.311Z,1528911645.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:45.713Z,1528911645.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:46.114Z,1528911646.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:46.515Z,1528911646.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:46.899Z,1528911646.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:47.304Z,1528911647.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:47.706Z,1528911647.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:48.113Z,1528911648.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:48.516Z,1528911648.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:48.916Z,1528911648.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:49.303Z,1528911649.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:49.706Z,1528911649.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:50.108Z,1528911650.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:50.503Z,1528911650.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:50.916Z,1528911650.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:51.315Z,1528911651.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:51.712Z,1528911651.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:52.112Z,1528911652.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:52.507Z,1528911652.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:52.904Z,1528911652.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:53.303Z,1528911653.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:53.303Z,1528911653.303 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 284
2018-06-13T17:40:53.303Z,1528911653.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:40:53.305Z,1528911653.305 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:53.305Z,1528911653.305 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 284
2018-06-13T17:40:53.305Z,1528911653.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:40:53.307Z,1528911653.307 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:53.307Z,1528911653.307 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 284
2018-06-13T17:40:53.307Z,1528911653.307 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:40:53.381Z,1528911653.381 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:40:53.381Z,1528911653.381 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:40:53.382Z,1528911653.382 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:40:53.793Z,1528911653.793 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:40:53.793Z,1528911653.793 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 284
2018-06-13T17:40:53.793Z,1528911653.793 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:40:53.793Z,1528911653.793 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 284
2018-06-13T17:40:53.794Z,1528911653.794 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:40:53.794Z,1528911653.794 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 284
2018-06-13T17:40:56.847Z,1528911656.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:40:56.848Z,1528911656.848 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:40:56.848Z,1528911656.848 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:40:56.848Z,1528911656.848 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:40:56.853Z,1528911656.853 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:40:56.853Z,1528911656.853 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:40:56.854Z,1528911656.854 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:40:56.854Z,1528911656.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:40:56.854Z,1528911656.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:40:57.028Z,1528911657.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T17:40:57.029Z,1528911657.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:57.407Z,1528911657.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T17:40:57.407Z,1528911657.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:57.801Z,1528911657.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T17:40:57.802Z,1528911657.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:58.184Z,1528911658.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T17:40:58.202Z,1528911658.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:58.584Z,1528911658.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T17:40:58.585Z,1528911658.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:59.018Z,1528911659.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T17:40:59.019Z,1528911659.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:59.413Z,1528911659.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T17:40:59.414Z,1528911659.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:40:59.817Z,1528911659.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T17:40:59.818Z,1528911659.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:00.185Z,1528911660.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T17:41:00.186Z,1528911660.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:00.587Z,1528911660.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T17:41:00.588Z,1528911660.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:00.992Z,1528911660.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T17:41:01.013Z,1528911661.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:01.387Z,1528911661.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T17:41:01.388Z,1528911661.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:01.818Z,1528911661.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T17:41:01.819Z,1528911661.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:02.200Z,1528911662.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T17:41:02.221Z,1528911662.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:02.599Z,1528911662.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T17:41:02.600Z,1528911662.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:02.990Z,1528911662.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T17:41:02.991Z,1528911662.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:03.396Z,1528911663.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T17:41:03.397Z,1528911663.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:03.795Z,1528911663.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T17:41:03.795Z,1528911663.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:04.199Z,1528911664.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T17:41:04.200Z,1528911664.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:04.595Z,1528911664.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T17:41:04.596Z,1528911664.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:04.988Z,1528911664.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T17:41:04.989Z,1528911664.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:05.388Z,1528911665.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T17:41:05.393Z,1528911665.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:05.804Z,1528911665.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T17:41:05.805Z,1528911665.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:06.202Z,1528911666.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T17:41:06.203Z,1528911666.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:06.601Z,1528911666.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T17:41:06.602Z,1528911666.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:07.005Z,1528911667.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T17:41:07.006Z,1528911667.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:07.392Z,1528911667.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T17:41:07.393Z,1528911667.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:07.805Z,1528911667.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T17:41:07.806Z,1528911667.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:08.206Z,1528911668.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T17:41:08.207Z,1528911668.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:08.603Z,1528911668.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T17:41:08.604Z,1528911668.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:09.000Z,1528911669.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T17:41:09.001Z,1528911669.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:09.404Z,1528911669.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T17:41:09.405Z,1528911669.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:09.806Z,1528911669.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T17:41:09.807Z,1528911669.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:10.213Z,1528911670.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T17:41:10.214Z,1528911670.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:10.602Z,1528911670.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T17:41:10.603Z,1528911670.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:10.998Z,1528911670.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T17:41:10.999Z,1528911670.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:11.403Z,1528911671.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T17:41:11.404Z,1528911671.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:11.807Z,1528911671.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T17:41:11.808Z,1528911671.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:12.203Z,1528911672.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T17:41:12.204Z,1528911672.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:12.606Z,1528911672.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T17:41:12.607Z,1528911672.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:13.016Z,1528911673.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T17:41:13.017Z,1528911673.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:13.397Z,1528911673.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:13.801Z,1528911673.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:14.210Z,1528911674.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:14.596Z,1528911674.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:15.003Z,1528911675.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:15.407Z,1528911675.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:15.814Z,1528911675.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:16.201Z,1528911676.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:16.605Z,1528911676.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:16.984Z,1528911676.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:17.388Z,1528911677.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:17.788Z,1528911677.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:18.195Z,1528911678.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:18.600Z,1528911678.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:18.995Z,1528911678.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:19.387Z,1528911679.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:19.796Z,1528911679.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:20.190Z,1528911680.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:20.588Z,1528911680.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:20.995Z,1528911680.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:21.400Z,1528911681.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:21.795Z,1528911681.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:22.190Z,1528911682.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:22.590Z,1528911682.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:22.988Z,1528911682.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:23.391Z,1528911683.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:23.790Z,1528911683.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:24.195Z,1528911684.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:24.595Z,1528911684.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:24.995Z,1528911684.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:25.388Z,1528911685.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:25.790Z,1528911685.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:26.200Z,1528911686.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:26.591Z,1528911686.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:26.996Z,1528911686.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:27.400Z,1528911687.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:27.795Z,1528911687.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:28.191Z,1528911688.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:28.597Z,1528911688.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:28.988Z,1528911688.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:29.390Z,1528911689.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:29.790Z,1528911689.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:30.196Z,1528911690.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:30.599Z,1528911690.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:31.004Z,1528911691.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:31.391Z,1528911691.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:31.790Z,1528911691.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:32.191Z,1528911692.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:32.587Z,1528911692.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:32.999Z,1528911692.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:33.400Z,1528911693.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:33.796Z,1528911693.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:34.191Z,1528911694.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:34.590Z,1528911694.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:34.988Z,1528911694.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:35.391Z,1528911695.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:35.806Z,1528911695.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:36.203Z,1528911696.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:36.604Z,1528911696.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:37.002Z,1528911697.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:37.387Z,1528911697.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:37.792Z,1528911697.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:38.191Z,1528911698.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:38.587Z,1528911698.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:39.005Z,1528911699.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:39.400Z,1528911699.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:39.801Z,1528911699.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:40.190Z,1528911700.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:40.591Z,1528911700.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:40.987Z,1528911700.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:41.391Z,1528911701.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:41.791Z,1528911701.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:42.202Z,1528911702.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:42.604Z,1528911702.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:43.000Z,1528911703.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:43.387Z,1528911703.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:43.788Z,1528911703.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:44.191Z,1528911704.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:44.592Z,1528911704.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:45.005Z,1528911705.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:45.400Z,1528911705.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:45.800Z,1528911705.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:46.190Z,1528911706.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:46.591Z,1528911706.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:46.987Z,1528911706.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:47.392Z,1528911707.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:47.791Z,1528911707.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:48.202Z,1528911708.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:48.605Z,1528911708.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:49.002Z,1528911709.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:49.391Z,1528911709.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:49.791Z,1528911709.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:50.198Z,1528911710.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:50.592Z,1528911710.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:51.005Z,1528911711.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:51.412Z,1528911711.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:51.805Z,1528911711.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:52.194Z,1528911712.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:52.591Z,1528911712.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:52.996Z,1528911712.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:53.391Z,1528911713.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:53.794Z,1528911713.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:56.908Z,1528911716.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:57.087Z,1528911717.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:57.460Z,1528911717.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:57.853Z,1528911717.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:58.256Z,1528911718.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:58.653Z,1528911718.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:59.057Z,1528911719.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:59.461Z,1528911719.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:41:59.860Z,1528911719.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:00.256Z,1528911720.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:00.652Z,1528911720.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:01.063Z,1528911721.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:01.448Z,1528911721.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:01.852Z,1528911721.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:02.260Z,1528911722.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:02.656Z,1528911722.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:03.060Z,1528911723.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:03.461Z,1528911723.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:03.848Z,1528911723.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:04.256Z,1528911724.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:04.654Z,1528911724.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:05.061Z,1528911725.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:05.459Z,1528911725.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:05.860Z,1528911725.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:06.256Z,1528911726.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:06.662Z,1528911726.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:07.053Z,1528911727.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:07.449Z,1528911727.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:07.854Z,1528911727.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:08.268Z,1528911728.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:08.661Z,1528911728.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:09.062Z,1528911729.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:09.456Z,1528911729.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:09.848Z,1528911729.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:10.258Z,1528911730.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:10.655Z,1528911730.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:11.062Z,1528911731.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:11.462Z,1528911731.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:11.861Z,1528911731.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:12.254Z,1528911732.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:12.655Z,1528911732.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:13.052Z,1528911733.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:13.449Z,1528911733.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:13.857Z,1528911733.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:14.261Z,1528911734.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:14.661Z,1528911734.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:15.060Z,1528911735.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:15.456Z,1528911735.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:15.849Z,1528911735.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:16.256Z,1528911736.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:16.651Z,1528911736.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:17.061Z,1528911737.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:17.464Z,1528911737.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:17.860Z,1528911737.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:18.253Z,1528911738.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:18.653Z,1528911738.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:19.056Z,1528911739.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:19.449Z,1528911739.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:19.852Z,1528911739.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:20.264Z,1528911740.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:20.662Z,1528911740.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:21.060Z,1528911741.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:21.451Z,1528911741.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:21.848Z,1528911741.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:22.256Z,1528911742.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:22.650Z,1528911742.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:23.061Z,1528911743.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:23.464Z,1528911743.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:23.864Z,1528911743.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:24.252Z,1528911744.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:24.651Z,1528911744.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:25.056Z,1528911745.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:25.452Z,1528911745.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:25.852Z,1528911745.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:26.260Z,1528911746.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:26.660Z,1528911746.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:27.059Z,1528911747.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:27.453Z,1528911747.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:27.852Z,1528911747.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:28.262Z,1528911748.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:28.659Z,1528911748.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:29.066Z,1528911749.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:29.465Z,1528911749.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:29.868Z,1528911749.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:30.262Z,1528911750.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:30.661Z,1528911750.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:31.063Z,1528911751.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:31.459Z,1528911751.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:31.858Z,1528911751.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:32.267Z,1528911752.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:32.668Z,1528911752.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:33.066Z,1528911753.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:33.464Z,1528911753.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:33.865Z,1528911753.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:34.262Z,1528911754.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:34.663Z,1528911754.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:35.067Z,1528911755.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:35.466Z,1528911755.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:35.872Z,1528911755.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:36.263Z,1528911756.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:36.663Z,1528911756.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:37.066Z,1528911757.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:37.444Z,1528911757.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:37.864Z,1528911757.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:38.280Z,1528911758.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:38.679Z,1528911758.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:39.060Z,1528911759.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:39.456Z,1528911759.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:39.853Z,1528911759.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:40.252Z,1528911760.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:40.652Z,1528911760.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:41.059Z,1528911761.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:41.459Z,1528911761.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:41.856Z,1528911761.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:42.256Z,1528911762.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:42.651Z,1528911762.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:43.051Z,1528911763.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:43.451Z,1528911763.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:43.852Z,1528911763.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:44.286Z,1528911764.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:44.683Z,1528911764.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:45.060Z,1528911765.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:45.452Z,1528911765.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:45.856Z,1528911765.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:46.255Z,1528911766.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:46.662Z,1528911766.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:47.060Z,1528911767.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:47.460Z,1528911767.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:47.862Z,1528911767.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:48.262Z,1528911768.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:48.656Z,1528911768.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:49.060Z,1528911769.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:49.466Z,1528911769.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:49.856Z,1528911769.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:50.272Z,1528911770.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:50.668Z,1528911770.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:51.065Z,1528911771.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:51.456Z,1528911771.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:51.864Z,1528911771.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:52.261Z,1528911772.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:52.655Z,1528911772.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:53.066Z,1528911773.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:53.466Z,1528911773.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:53.865Z,1528911773.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:56.967Z,1528911776.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:57.145Z,1528911777.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:57.552Z,1528911777.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:57.928Z,1528911777.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:58.324Z,1528911778.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:58.716Z,1528911778.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:59.115Z,1528911779.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:59.530Z,1528911779.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:42:59.918Z,1528911779.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:00.325Z,1528911780.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:00.727Z,1528911780.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:01.128Z,1528911781.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:01.520Z,1528911781.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:01.919Z,1528911781.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:02.332Z,1528911782.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:02.715Z,1528911782.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:03.128Z,1528911783.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:03.528Z,1528911783.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:03.924Z,1528911783.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:04.320Z,1528911784.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:04.722Z,1528911784.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:05.115Z,1528911785.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:05.519Z,1528911785.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:05.921Z,1528911785.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:06.328Z,1528911786.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:06.727Z,1528911786.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:07.123Z,1528911787.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:07.519Z,1528911787.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:07.924Z,1528911787.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:08.323Z,1528911788.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:08.715Z,1528911788.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:09.079Z,1528911789.079 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T17:43:09.079Z,1528911789.079 [NAL9602] Data Fault, FailCount= 3
2018-06-13T17:43:09.079Z,1528911789.079 [NAL9602](ERROR): Data Fault
2018-06-13T17:43:09.148Z,1528911789.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:09.225Z,1528911789.225 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T17:43:09.478Z,1528911789.478 [NAL9602](INFO): Powering down
2018-06-13T17:43:09.527Z,1528911789.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:09.914Z,1528911789.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:10.317Z,1528911790.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:10.393Z,1528911790.393 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T17:43:10.393Z,1528911790.393 [NAL9602] No Fault, FailCount= 3
2018-06-13T17:43:10.720Z,1528911790.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:11.118Z,1528911791.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:11.519Z,1528911791.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:11.924Z,1528911791.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:12.314Z,1528911792.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:12.719Z,1528911792.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:13.118Z,1528911793.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:13.514Z,1528911793.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:13.922Z,1528911793.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:14.327Z,1528911794.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:14.714Z,1528911794.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:15.124Z,1528911795.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:15.518Z,1528911795.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:15.915Z,1528911795.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:16.317Z,1528911796.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:16.724Z,1528911796.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:17.115Z,1528911797.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:17.518Z,1528911797.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:17.919Z,1528911797.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:18.315Z,1528911798.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:18.723Z,1528911798.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:19.128Z,1528911799.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:19.514Z,1528911799.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:19.918Z,1528911799.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:20.318Z,1528911800.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:20.720Z,1528911800.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:21.119Z,1528911801.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:21.520Z,1528911801.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:21.916Z,1528911801.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:22.324Z,1528911802.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:22.719Z,1528911802.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:23.116Z,1528911803.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:23.519Z,1528911803.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:23.924Z,1528911803.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:24.316Z,1528911804.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:24.724Z,1528911804.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:25.117Z,1528911805.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:25.519Z,1528911805.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:25.919Z,1528911805.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:26.317Z,1528911806.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:26.716Z,1528911806.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:27.119Z,1528911807.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:27.518Z,1528911807.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:27.915Z,1528911807.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:28.318Z,1528911808.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:28.724Z,1528911808.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:29.116Z,1528911809.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:29.518Z,1528911809.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:29.918Z,1528911809.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:30.329Z,1528911810.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:30.724Z,1528911810.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:31.128Z,1528911811.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:31.531Z,1528911811.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:31.928Z,1528911811.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:32.323Z,1528911812.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:32.725Z,1528911812.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:33.126Z,1528911813.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:33.527Z,1528911813.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:33.920Z,1528911813.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:34.331Z,1528911814.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:34.734Z,1528911814.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:35.126Z,1528911815.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:35.537Z,1528911815.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:35.911Z,1528911815.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:36.312Z,1528911816.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:36.716Z,1528911816.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:37.116Z,1528911817.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:37.516Z,1528911817.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:37.920Z,1528911817.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:38.315Z,1528911818.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:38.711Z,1528911818.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:39.116Z,1528911819.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:39.481Z,1528911819.481 [NAL9602](INFO): Powering up NAL9602
2018-06-13T17:43:39.515Z,1528911819.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:39.911Z,1528911819.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:40.315Z,1528911820.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:40.714Z,1528911820.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:41.115Z,1528911821.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:41.515Z,1528911821.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:41.915Z,1528911821.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:42.315Z,1528911822.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:42.715Z,1528911822.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:43.114Z,1528911823.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:43.510Z,1528911823.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:43.916Z,1528911823.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:44.314Z,1528911824.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:44.711Z,1528911824.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:45.120Z,1528911825.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:45.515Z,1528911825.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:45.913Z,1528911825.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:46.315Z,1528911826.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:46.719Z,1528911826.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:47.113Z,1528911827.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:47.515Z,1528911827.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:47.914Z,1528911827.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:48.314Z,1528911828.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:48.715Z,1528911828.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:49.114Z,1528911829.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:49.514Z,1528911829.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:49.919Z,1528911829.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:49.922Z,1528911829.922 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T17:43:49.922Z,1528911829.922 [Default:CheckIn:C.Wait] Stopped
2018-06-13T17:43:49.922Z,1528911829.922 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T17:43:49.922Z,1528911829.922 [Default:CheckIn:D] Running Loop=1
2018-06-13T17:43:50.325Z,1528911830.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:50.328Z,1528911830.328 [Default:CheckIn:D] Stopped
2018-06-13T17:43:50.349Z,1528911830.349 [Default:CheckIn:E] Running Loop=1
2018-06-13T17:43:53.395Z,1528911833.395 [NAL9602](INFO): NAL9602 initialized
2018-06-13T17:43:53.430Z,1528911833.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:53.462Z,1528911833.462 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 856.614714 min 
2018-06-13T17:43:53.462Z,1528911833.462 [Default:CheckIn:E] Stopped
2018-06-13T17:43:53.462Z,1528911833.462 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T17:43:53.462Z,1528911833.462 [Default:CheckIn] Stopped
2018-06-13T17:43:53.462Z,1528911833.462 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T17:43:53.462Z,1528911833.462 [Default:CheckIn](INFO): Running loop #83
2018-06-13T17:43:53.463Z,1528911833.463 [Default:CheckIn] Running Loop=83
2018-06-13T17:43:53.463Z,1528911833.463 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T17:43:53.463Z,1528911833.463 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T17:43:53.612Z,1528911833.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:54.014Z,1528911834.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:54.409Z,1528911834.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:54.809Z,1528911834.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:55.197Z,1528911835.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:55.588Z,1528911835.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:55.992Z,1528911835.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:56.417Z,1528911836.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:56.816Z,1528911836.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:57.218Z,1528911837.218 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:57.218Z,1528911837.218 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 285
2018-06-13T17:43:57.218Z,1528911837.218 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:43:57.220Z,1528911837.220 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:57.220Z,1528911837.220 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 285
2018-06-13T17:43:57.220Z,1528911837.220 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:43:57.222Z,1528911837.222 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:57.222Z,1528911837.222 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 285
2018-06-13T17:43:57.222Z,1528911837.222 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:43:57.301Z,1528911837.301 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:43:57.301Z,1528911837.301 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:43:57.302Z,1528911837.302 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:43:57.681Z,1528911837.681 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:43:57.681Z,1528911837.681 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 285
2018-06-13T17:43:57.682Z,1528911837.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:43:57.682Z,1528911837.682 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 285
2018-06-13T17:43:57.682Z,1528911837.682 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:43:57.682Z,1528911837.682 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 285
2018-06-13T17:43:57.994Z,1528911837.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:43:57.995Z,1528911837.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:43:57.995Z,1528911837.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:43:57.995Z,1528911837.995 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:43:57.996Z,1528911837.996 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:43:57.996Z,1528911837.996 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:43:57.997Z,1528911837.997 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:43:57.997Z,1528911837.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:43:57.997Z,1528911837.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:43:58.403Z,1528911838.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:43:58.404Z,1528911838.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:58.799Z,1528911838.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:43:58.800Z,1528911838.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:59.208Z,1528911839.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:43:59.209Z,1528911839.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:43:59.612Z,1528911839.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:43:59.613Z,1528911839.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:00.009Z,1528911840.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:44:00.010Z,1528911840.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:00.392Z,1528911840.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:44:00.393Z,1528911840.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:00.795Z,1528911840.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:44:00.796Z,1528911840.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:01.216Z,1528911841.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:44:01.217Z,1528911841.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:01.608Z,1528911841.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:44:01.610Z,1528911841.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:02.004Z,1528911842.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:44:02.005Z,1528911842.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:02.407Z,1528911842.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:44:02.408Z,1528911842.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:02.800Z,1528911842.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:44:02.800Z,1528911842.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:03.214Z,1528911843.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:44:03.215Z,1528911843.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:03.615Z,1528911843.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:44:03.615Z,1528911843.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:04.012Z,1528911844.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:44:04.014Z,1528911844.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:04.402Z,1528911844.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:44:04.403Z,1528911844.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:04.808Z,1528911844.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:44:04.809Z,1528911844.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:05.205Z,1528911845.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:44:05.206Z,1528911845.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:05.611Z,1528911845.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:44:05.612Z,1528911845.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:06.011Z,1528911846.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:44:06.012Z,1528911846.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:06.401Z,1528911846.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:44:06.402Z,1528911846.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:06.796Z,1528911846.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:44:06.797Z,1528911846.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:07.210Z,1528911847.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:44:07.211Z,1528911847.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:07.608Z,1528911847.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:44:07.609Z,1528911847.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:08.005Z,1528911848.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:44:08.006Z,1528911848.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:08.401Z,1528911848.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:44:08.402Z,1528911848.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:08.795Z,1528911848.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:44:08.796Z,1528911848.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:09.209Z,1528911849.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:44:09.210Z,1528911849.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:09.610Z,1528911849.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:44:09.611Z,1528911849.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:10.000Z,1528911850.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:44:10.002Z,1528911850.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:10.405Z,1528911850.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:44:10.406Z,1528911850.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:10.808Z,1528911850.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:44:10.809Z,1528911850.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:11.208Z,1528911851.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:44:11.209Z,1528911851.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:11.608Z,1528911851.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:44:11.609Z,1528911851.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:12.010Z,1528911852.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:44:12.011Z,1528911852.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:12.404Z,1528911852.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:44:12.404Z,1528911852.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:12.800Z,1528911852.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:44:12.800Z,1528911852.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:13.215Z,1528911853.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:44:13.216Z,1528911853.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:13.610Z,1528911853.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:44:13.611Z,1528911853.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:14.016Z,1528911854.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:44:14.017Z,1528911854.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:14.405Z,1528911854.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:44:14.406Z,1528911854.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:14.812Z,1528911854.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:44:14.817Z,1528911854.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:15.218Z,1528911855.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:44:15.219Z,1528911855.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:15.618Z,1528911855.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:44:15.619Z,1528911855.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:16.017Z,1528911856.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:44:16.018Z,1528911856.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:16.396Z,1528911856.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:44:16.417Z,1528911856.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:16.792Z,1528911856.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:44:16.793Z,1528911856.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:17.198Z,1528911857.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T17:44:17.199Z,1528911857.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:17.622Z,1528911857.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:18.024Z,1528911858.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:18.394Z,1528911858.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:18.795Z,1528911858.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:19.223Z,1528911859.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:19.603Z,1528911859.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:19.000Z,1528911860.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:20.396Z,1528911860.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:20.792Z,1528911860.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:21.200Z,1528911861.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:21.603Z,1528911861.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:21.000Z,1528911862.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:22.394Z,1528911862.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:22.795Z,1528911862.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:23.200Z,1528911863.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:23.603Z,1528911863.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:24.025Z,1528911864.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:24.395Z,1528911864.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:24.794Z,1528911864.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:25.203Z,1528911865.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:25.604Z,1528911865.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:26.004Z,1528911866.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:26.395Z,1528911866.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:26.794Z,1528911866.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:27.204Z,1528911867.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:27.603Z,1528911867.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:28.004Z,1528911868.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:28.398Z,1528911868.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:28.796Z,1528911868.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:29.204Z,1528911869.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:29.608Z,1528911869.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:30.008Z,1528911870.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:30.399Z,1528911870.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:30.795Z,1528911870.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:31.203Z,1528911871.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:31.603Z,1528911871.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:32.004Z,1528911872.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:32.395Z,1528911872.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:32.792Z,1528911872.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:33.195Z,1528911873.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:33.603Z,1528911873.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:34.003Z,1528911874.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:34.408Z,1528911874.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:34.796Z,1528911874.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:35.200Z,1528911875.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:35.596Z,1528911875.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:35.995Z,1528911875.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:36.405Z,1528911876.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:36.803Z,1528911876.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:37.208Z,1528911877.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:37.594Z,1528911877.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:37.996Z,1528911877.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:38.395Z,1528911878.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:38.795Z,1528911878.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:39.223Z,1528911879.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:39.603Z,1528911879.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:40.003Z,1528911880.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:40.404Z,1528911880.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:40.795Z,1528911880.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:41.195Z,1528911881.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:41.598Z,1528911881.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:42.004Z,1528911882.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:42.407Z,1528911882.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:42.803Z,1528911882.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:43.200Z,1528911883.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:43.595Z,1528911883.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:43.995Z,1528911883.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:44.396Z,1528911884.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:44.796Z,1528911884.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:45.196Z,1528911885.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:45.603Z,1528911885.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:46.004Z,1528911886.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:46.405Z,1528911886.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:46.799Z,1528911886.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:47.194Z,1528911887.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:47.596Z,1528911887.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:47.997Z,1528911887.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:48.408Z,1528911888.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:48.804Z,1528911888.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:49.208Z,1528911889.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:49.595Z,1528911889.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:49.996Z,1528911889.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:50.400Z,1528911890.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:53.510Z,1528911893.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:53.684Z,1528911893.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:54.092Z,1528911894.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:54.491Z,1528911894.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:54.867Z,1528911894.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:55.256Z,1528911895.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:55.664Z,1528911895.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:56.055Z,1528911896.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:56.467Z,1528911896.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:56.888Z,1528911896.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:57.263Z,1528911897.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:57.660Z,1528911897.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:58.064Z,1528911898.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:58.460Z,1528911898.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:58.859Z,1528911898.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:59.263Z,1528911899.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:44:59.667Z,1528911899.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:00.067Z,1528911900.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:00.458Z,1528911900.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:00.858Z,1528911900.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:01.267Z,1528911901.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:01.667Z,1528911901.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:02.068Z,1528911902.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:02.461Z,1528911902.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:02.858Z,1528911902.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:03.268Z,1528911903.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:03.668Z,1528911903.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:04.068Z,1528911904.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:04.470Z,1528911904.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:04.868Z,1528911904.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:05.266Z,1528911905.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:05.676Z,1528911905.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:06.076Z,1528911906.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:06.460Z,1528911906.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:06.875Z,1528911906.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:07.276Z,1528911907.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:07.669Z,1528911907.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:08.066Z,1528911908.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:08.462Z,1528911908.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:08.864Z,1528911908.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:09.269Z,1528911909.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:09.676Z,1528911909.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:10.065Z,1528911910.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:10.472Z,1528911910.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:10.864Z,1528911910.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:11.264Z,1528911911.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:11.672Z,1528911911.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:12.073Z,1528911912.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:12.465Z,1528911912.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:12.868Z,1528911912.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:13.268Z,1528911913.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:13.657Z,1528911913.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:14.064Z,1528911914.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:14.472Z,1528911914.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:14.873Z,1528911914.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:15.270Z,1528911915.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:15.664Z,1528911915.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:16.068Z,1528911916.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:16.467Z,1528911916.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:16.874Z,1528911916.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:17.260Z,1528911917.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:17.669Z,1528911917.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:18.074Z,1528911918.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:18.469Z,1528911918.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:18.860Z,1528911918.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:19.261Z,1528911919.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:19.661Z,1528911919.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:20.068Z,1528911920.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:20.474Z,1528911920.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:20.873Z,1528911920.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:21.269Z,1528911921.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:21.663Z,1528911921.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:22.061Z,1528911922.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:22.460Z,1528911922.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:22.872Z,1528911922.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:23.266Z,1528911923.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:23.671Z,1528911923.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:24.074Z,1528911924.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:24.467Z,1528911924.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:24.866Z,1528911924.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:25.265Z,1528911925.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:25.662Z,1528911925.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:26.064Z,1528911926.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:26.475Z,1528911926.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:26.871Z,1528911926.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:27.270Z,1528911927.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:27.676Z,1528911927.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:28.064Z,1528911928.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:28.468Z,1528911928.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:28.870Z,1528911928.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:29.248Z,1528911929.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:29.679Z,1528911929.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:30.078Z,1528911930.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:30.478Z,1528911930.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:30.852Z,1528911930.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:31.270Z,1528911931.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:31.663Z,1528911931.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:32.055Z,1528911932.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:32.487Z,1528911932.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:32.883Z,1528911932.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:33.283Z,1528911933.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:33.656Z,1528911933.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:34.060Z,1528911934.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:34.462Z,1528911934.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:34.860Z,1528911934.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:35.256Z,1528911935.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:35.668Z,1528911935.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:36.067Z,1528911936.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:36.472Z,1528911936.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:36.858Z,1528911936.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:37.264Z,1528911937.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:37.657Z,1528911937.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:38.058Z,1528911938.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:38.467Z,1528911938.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:38.864Z,1528911938.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:39.265Z,1528911939.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:39.660Z,1528911939.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:40.058Z,1528911940.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:40.459Z,1528911940.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:40.842Z,1528911940.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:40.861Z,1528911940.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:41.235Z,1528911941.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:41.260Z,1528911941.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:41.646Z,1528911941.646 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:41.664Z,1528911941.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:42.050Z,1528911942.050 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:42.067Z,1528911942.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:42.446Z,1528911942.446 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:42.483Z,1528911942.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:42.834Z,1528911942.834 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:42.867Z,1528911942.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:43.240Z,1528911943.240 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:43.259Z,1528911943.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:43.636Z,1528911943.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:43.664Z,1528911943.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:44.039Z,1528911944.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:44.078Z,1528911944.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:44.456Z,1528911944.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:44.475Z,1528911944.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:44.855Z,1528911944.855 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:44.880Z,1528911944.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:45.252Z,1528911945.252 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:45.270Z,1528911945.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:45.642Z,1528911945.642 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:45.661Z,1528911945.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:46.031Z,1528911946.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:46.060Z,1528911946.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:46.439Z,1528911946.439 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:46.468Z,1528911946.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:46.836Z,1528911946.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:46.873Z,1528911946.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:47.235Z,1528911947.235 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:47.262Z,1528911947.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:47.652Z,1528911947.652 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:47.669Z,1528911947.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:48.056Z,1528911948.056 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:48.075Z,1528911948.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:48.447Z,1528911948.447 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:48.465Z,1528911948.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:48.836Z,1528911948.836 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:48.863Z,1528911948.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:49.232Z,1528911949.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:49.269Z,1528911949.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:49.636Z,1528911949.636 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:49.663Z,1528911949.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:50.039Z,1528911950.039 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:50.066Z,1528911950.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:50.456Z,1528911950.456 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:50.474Z,1528911950.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:53.564Z,1528911953.564 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:53.582Z,1528911953.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:53.715Z,1528911953.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:53.763Z,1528911953.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:54.102Z,1528911954.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:54.121Z,1528911954.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:54.502Z,1528911954.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:54.519Z,1528911954.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:54.892Z,1528911954.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:54.924Z,1528911954.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:55.291Z,1528911955.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:55.321Z,1528911955.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:55.707Z,1528911955.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:55.725Z,1528911955.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:56.111Z,1528911956.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:56.129Z,1528911956.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:56.513Z,1528911956.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:56.531Z,1528911956.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:56.887Z,1528911956.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:56.915Z,1528911956.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:57.291Z,1528911957.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:57.328Z,1528911957.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:57.692Z,1528911957.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:57.721Z,1528911957.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:58.091Z,1528911958.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:58.118Z,1528911958.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:58.507Z,1528911958.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:58.525Z,1528911958.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:58.907Z,1528911958.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:58.926Z,1528911958.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:59.303Z,1528911959.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:59.321Z,1528911959.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:45:59.692Z,1528911959.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:45:59.719Z,1528911959.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:00.091Z,1528911960.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:00.120Z,1528911960.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:00.491Z,1528911960.491 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:00.518Z,1528911960.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:00.892Z,1528911960.892 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:00.927Z,1528911960.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:01.291Z,1528911961.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:01.320Z,1528911961.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:01.709Z,1528911961.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:01.727Z,1528911961.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:02.111Z,1528911962.111 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:02.129Z,1528911962.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:02.512Z,1528911962.512 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:02.530Z,1528911962.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:02.887Z,1528911962.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:02.923Z,1528911962.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:03.291Z,1528911963.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:03.324Z,1528911963.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:03.692Z,1528911963.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:03.733Z,1528911963.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:04.091Z,1528911964.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:04.118Z,1528911964.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:04.508Z,1528911964.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:04.526Z,1528911964.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:04.912Z,1528911964.912 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:04.930Z,1528911964.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:05.303Z,1528911965.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:05.321Z,1528911965.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:05.687Z,1528911965.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:05.725Z,1528911965.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:06.091Z,1528911966.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:06.122Z,1528911966.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:06.492Z,1528911966.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:06.524Z,1528911966.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:06.891Z,1528911966.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:06.930Z,1528911966.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:07.291Z,1528911967.291 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:07.324Z,1528911967.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:07.697Z,1528911967.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:07.731Z,1528911967.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:08.105Z,1528911968.105 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:46:08.140Z,1528911968.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:08.545Z,1528911968.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:08.904Z,1528911968.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:09.330Z,1528911969.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:09.726Z,1528911969.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:10.108Z,1528911970.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:10.539Z,1528911970.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:10.938Z,1528911970.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:11.335Z,1528911971.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:11.713Z,1528911971.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:12.114Z,1528911972.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:12.508Z,1528911972.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:12.912Z,1528911972.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:13.314Z,1528911973.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:13.719Z,1528911973.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:14.139Z,1528911974.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:14.539Z,1528911974.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:14.911Z,1528911974.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:15.312Z,1528911975.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:15.713Z,1528911975.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:16.114Z,1528911976.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:16.519Z,1528911976.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:16.923Z,1528911976.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:17.319Z,1528911977.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:17.713Z,1528911977.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:18.115Z,1528911978.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:18.513Z,1528911978.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:18.914Z,1528911978.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:19.315Z,1528911979.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:19.720Z,1528911979.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:20.123Z,1528911980.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:20.523Z,1528911980.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:20.914Z,1528911980.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:21.313Z,1528911981.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:21.726Z,1528911981.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:22.112Z,1528911982.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:22.524Z,1528911982.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:22.927Z,1528911982.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:23.321Z,1528911983.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:23.715Z,1528911983.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:24.115Z,1528911984.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:24.512Z,1528911984.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:24.927Z,1528911984.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:25.315Z,1528911985.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:25.720Z,1528911985.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:26.127Z,1528911986.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:26.532Z,1528911986.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:26.916Z,1528911986.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:27.318Z,1528911987.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:27.717Z,1528911987.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:28.113Z,1528911988.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:28.523Z,1528911988.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:28.926Z,1528911988.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:29.324Z,1528911989.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:29.717Z,1528911989.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:30.116Z,1528911990.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:30.512Z,1528911990.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:30.915Z,1528911990.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:31.314Z,1528911991.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:31.722Z,1528911991.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:32.128Z,1528911992.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:32.524Z,1528911992.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:32.912Z,1528911992.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:33.314Z,1528911993.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:33.716Z,1528911993.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:34.112Z,1528911994.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:34.525Z,1528911994.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:34.928Z,1528911994.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:35.321Z,1528911995.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:35.729Z,1528911995.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:36.120Z,1528911996.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:36.524Z,1528911996.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:36.921Z,1528911996.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:37.304Z,1528911997.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:37.730Z,1528911997.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:38.130Z,1528911998.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:38.529Z,1528911998.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:38.904Z,1528911998.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:39.328Z,1528911999.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:39.705Z,1528911999.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:40.108Z,1528912000.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:40.535Z,1528912000.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:40.932Z,1528912000.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:41.334Z,1528912001.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:41.712Z,1528912001.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:42.107Z,1528912002.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:42.508Z,1528912002.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:42.923Z,1528912002.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:43.316Z,1528912003.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:43.736Z,1528912003.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:44.133Z,1528912004.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:44.538Z,1528912004.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:44.912Z,1528912004.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:45.312Z,1528912005.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:45.712Z,1528912005.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:46.112Z,1528912006.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:46.536Z,1528912006.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:46.935Z,1528912006.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:47.338Z,1528912007.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:47.712Z,1528912007.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:48.112Z,1528912008.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:48.516Z,1528912008.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:48.913Z,1528912008.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:49.311Z,1528912009.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:49.737Z,1528912009.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:50.135Z,1528912010.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:50.536Z,1528912010.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:53.637Z,1528912013.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:53.788Z,1528912013.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:54.205Z,1528912014.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:54.591Z,1528912014.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:54.987Z,1528912014.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:55.372Z,1528912015.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:55.773Z,1528912015.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:56.172Z,1528912016.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:56.599Z,1528912016.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:56.997Z,1528912016.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:57.397Z,1528912017.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:57.772Z,1528912017.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:58.173Z,1528912018.173 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:58.173Z,1528912018.173 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 286
2018-06-13T17:46:58.173Z,1528912018.173 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:46:58.175Z,1528912018.175 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:58.175Z,1528912018.175 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 286
2018-06-13T17:46:58.175Z,1528912018.175 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:46:58.193Z,1528912018.193 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:58.193Z,1528912018.193 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 286
2018-06-13T17:46:58.193Z,1528912018.193 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:46:58.277Z,1528912018.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:46:58.277Z,1528912018.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:46:58.277Z,1528912018.277 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:46:58.649Z,1528912018.649 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:46:58.649Z,1528912018.649 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 286
2018-06-13T17:46:58.650Z,1528912018.650 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:46:58.650Z,1528912018.650 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 286
2018-06-13T17:46:58.650Z,1528912018.650 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:46:58.650Z,1528912018.650 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 286
2018-06-13T17:46:58.971Z,1528912018.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:46:58.972Z,1528912018.972 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:46:58.972Z,1528912018.972 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:46:58.972Z,1528912018.972 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:46:58.973Z,1528912018.973 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:46:58.973Z,1528912018.973 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:46:58.974Z,1528912018.974 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:46:58.974Z,1528912018.974 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:46:58.974Z,1528912018.974 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:46:59.372Z,1528912019.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:46:59.373Z,1528912019.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:46:59.779Z,1528912019.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:46:59.780Z,1528912019.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:00.178Z,1528912020.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:47:00.179Z,1528912020.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:00.579Z,1528912020.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:47:00.580Z,1528912020.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:00.974Z,1528912020.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:47:00.974Z,1528912020.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:01.375Z,1528912021.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:47:01.376Z,1528912021.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:01.775Z,1528912021.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:47:01.776Z,1528912021.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:02.176Z,1528912022.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:47:02.177Z,1528912022.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:02.583Z,1528912022.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:47:02.583Z,1528912022.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:02.983Z,1528912022.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:47:02.984Z,1528912022.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:03.386Z,1528912023.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:47:03.387Z,1528912023.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:03.776Z,1528912023.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:47:03.777Z,1528912023.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:04.180Z,1528912024.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:47:04.181Z,1528912024.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:04.575Z,1528912024.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:47:04.576Z,1528912024.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:04.978Z,1528912024.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:47:04.979Z,1528912024.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:05.374Z,1528912025.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:47:05.375Z,1528912025.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:05.783Z,1528912025.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:47:05.784Z,1528912025.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:06.183Z,1528912026.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:47:06.184Z,1528912026.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:06.588Z,1528912026.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:47:06.589Z,1528912026.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:06.975Z,1528912026.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:47:06.976Z,1528912026.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:07.378Z,1528912027.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:47:07.379Z,1528912027.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:07.780Z,1528912027.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:47:07.780Z,1528912027.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:08.175Z,1528912028.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:47:08.176Z,1528912028.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:08.585Z,1528912028.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:47:08.586Z,1528912028.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:08.988Z,1528912028.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:47:08.989Z,1528912028.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:09.385Z,1528912029.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:47:09.386Z,1528912029.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:09.788Z,1528912029.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:47:09.789Z,1528912029.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:10.173Z,1528912030.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:47:10.174Z,1528912030.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:10.577Z,1528912030.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:47:10.578Z,1528912030.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:10.979Z,1528912030.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:47:10.980Z,1528912030.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:11.373Z,1528912031.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:47:11.374Z,1528912031.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:11.788Z,1528912031.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:47:11.789Z,1528912031.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:12.185Z,1528912032.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:47:12.186Z,1528912032.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:12.585Z,1528912032.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:47:12.586Z,1528912032.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:12.976Z,1528912032.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:47:12.977Z,1528912032.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:13.376Z,1528912033.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:47:13.377Z,1528912033.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:13.776Z,1528912033.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:47:13.777Z,1528912033.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:14.184Z,1528912034.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:47:14.185Z,1528912034.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:14.585Z,1528912034.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:47:14.586Z,1528912034.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:14.983Z,1528912034.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:47:14.984Z,1528912034.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:15.392Z,1528912035.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:47:15.393Z,1528912035.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:15.776Z,1528912035.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:47:15.777Z,1528912035.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:16.181Z,1528912036.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:47:16.182Z,1528912036.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:16.575Z,1528912036.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:47:16.576Z,1528912036.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:16.976Z,1528912036.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:47:16.977Z,1528912036.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:17.382Z,1528912037.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:47:17.382Z,1528912037.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:17.783Z,1528912037.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:47:17.784Z,1528912037.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:18.192Z,1528912038.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:18.588Z,1528912038.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:18.976Z,1528912038.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:19.377Z,1528912039.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:19.775Z,1528912039.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:20.176Z,1528912040.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:20.585Z,1528912040.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:20.985Z,1528912040.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:21.384Z,1528912041.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:21.780Z,1528912041.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:22.173Z,1528912042.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:22.572Z,1528912042.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:22.976Z,1528912042.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:23.374Z,1528912043.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:23.784Z,1528912043.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:24.189Z,1528912044.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:24.588Z,1528912044.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:24.977Z,1528912044.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:25.380Z,1528912045.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:25.778Z,1528912045.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:26.176Z,1528912046.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:26.596Z,1528912046.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:26.992Z,1528912046.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:27.384Z,1528912047.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:27.780Z,1528912047.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:28.172Z,1528912048.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:28.578Z,1528912048.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:28.976Z,1528912048.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:29.374Z,1528912049.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:29.786Z,1528912049.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:30.198Z,1528912050.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:30.598Z,1528912050.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:30.972Z,1528912050.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:31.372Z,1528912051.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:31.785Z,1528912051.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:32.172Z,1528912052.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:32.599Z,1528912052.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:32.998Z,1528912052.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:33.393Z,1528912053.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:33.796Z,1528912053.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:34.176Z,1528912054.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:34.572Z,1528912054.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:34.977Z,1528912054.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:35.376Z,1528912055.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:35.805Z,1528912055.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:36.183Z,1528912056.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:36.584Z,1528912056.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:36.976Z,1528912056.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:37.376Z,1528912057.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:37.775Z,1528912057.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:38.179Z,1528912058.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:38.588Z,1528912058.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:38.987Z,1528912058.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:39.384Z,1528912059.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:39.788Z,1528912059.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:40.179Z,1528912060.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:40.578Z,1528912060.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:40.976Z,1528912060.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:41.392Z,1528912061.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:41.783Z,1528912061.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:42.187Z,1528912062.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:42.585Z,1528912062.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:42.979Z,1528912062.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:43.384Z,1528912063.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:43.789Z,1528912063.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:44.184Z,1528912064.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:44.592Z,1528912064.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:44.992Z,1528912064.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:45.396Z,1528912065.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:45.780Z,1528912065.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:46.180Z,1528912066.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:46.584Z,1528912066.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:46.979Z,1528912066.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:47.376Z,1528912067.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:47.792Z,1528912067.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:48.191Z,1528912068.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:48.592Z,1528912068.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:48.979Z,1528912068.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:49.384Z,1528912069.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:49.778Z,1528912069.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:50.182Z,1528912070.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:50.591Z,1528912070.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:53.720Z,1528912073.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:53.881Z,1528912073.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:54.281Z,1528912074.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:54.674Z,1528912074.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:55.065Z,1528912075.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:55.480Z,1528912075.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:55.884Z,1528912075.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:56.284Z,1528912076.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:56.690Z,1528912076.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:57.084Z,1528912077.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:57.465Z,1528912077.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:57.861Z,1528912077.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:58.264Z,1528912078.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:58.688Z,1528912078.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:59.091Z,1528912079.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:59.487Z,1528912079.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:47:59.861Z,1528912079.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:00.262Z,1528912080.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:00.662Z,1528912080.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:01.074Z,1528912081.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:01.476Z,1528912081.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:01.874Z,1528912081.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:02.273Z,1528912082.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:02.674Z,1528912082.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:03.062Z,1528912083.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:03.469Z,1528912083.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:03.865Z,1528912083.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:04.260Z,1528912084.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:04.673Z,1528912084.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:05.080Z,1528912085.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:05.469Z,1528912085.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:05.874Z,1528912085.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:06.264Z,1528912086.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:06.661Z,1528912086.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:07.065Z,1528912087.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:07.464Z,1528912087.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:07.869Z,1528912087.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:08.276Z,1528912088.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:08.673Z,1528912088.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:09.062Z,1528912089.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:09.463Z,1528912089.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:09.876Z,1528912089.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:10.268Z,1528912090.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:10.673Z,1528912090.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:11.078Z,1528912091.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:11.469Z,1528912091.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:11.877Z,1528912091.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:12.268Z,1528912092.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:12.672Z,1528912092.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:13.066Z,1528912093.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:13.476Z,1528912093.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:13.870Z,1528912093.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:14.277Z,1528912094.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:14.679Z,1528912094.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:15.070Z,1528912095.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:15.464Z,1528912095.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:15.869Z,1528912095.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:16.264Z,1528912096.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:16.677Z,1528912096.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:17.077Z,1528912097.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:17.476Z,1528912097.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:17.864Z,1528912097.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:18.276Z,1528912098.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:18.665Z,1528912098.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:19.065Z,1528912099.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:19.467Z,1528912099.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:19.873Z,1528912099.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:20.284Z,1528912100.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:20.678Z,1528912100.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:21.071Z,1528912101.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:21.476Z,1528912101.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:21.875Z,1528912101.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:22.265Z,1528912102.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:22.670Z,1528912102.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:23.082Z,1528912103.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:23.474Z,1528912103.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:23.872Z,1528912103.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:24.273Z,1528912104.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:24.676Z,1528912104.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:25.075Z,1528912105.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:25.473Z,1528912105.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:25.875Z,1528912105.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:26.283Z,1528912106.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:26.679Z,1528912106.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:27.070Z,1528912107.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:27.472Z,1528912107.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:27.870Z,1528912107.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:28.283Z,1528912108.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:28.674Z,1528912108.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:29.078Z,1528912109.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:29.482Z,1528912109.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:29.876Z,1528912109.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:30.276Z,1528912110.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:30.664Z,1528912110.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:31.075Z,1528912111.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:31.476Z,1528912111.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:31.875Z,1528912111.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:32.281Z,1528912112.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:32.683Z,1528912112.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:33.074Z,1528912113.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:33.474Z,1528912113.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:33.874Z,1528912113.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:34.280Z,1528912114.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:34.679Z,1528912114.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:35.092Z,1528912115.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:35.482Z,1528912115.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:35.880Z,1528912115.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:36.274Z,1528912116.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:36.663Z,1528912116.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:37.067Z,1528912117.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:37.482Z,1528912117.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:37.884Z,1528912117.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:38.277Z,1528912118.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:38.674Z,1528912118.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:39.064Z,1528912119.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:39.468Z,1528912119.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:39.874Z,1528912119.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:40.264Z,1528912120.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:40.681Z,1528912120.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:41.075Z,1528912121.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:41.478Z,1528912121.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:41.869Z,1528912121.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:42.270Z,1528912122.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:42.668Z,1528912122.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:43.068Z,1528912123.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:43.467Z,1528912123.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:43.874Z,1528912123.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:44.278Z,1528912124.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:44.678Z,1528912124.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:45.072Z,1528912125.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:45.482Z,1528912125.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:45.866Z,1528912125.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:46.268Z,1528912126.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:46.677Z,1528912126.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:47.082Z,1528912127.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:47.477Z,1528912127.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:47.875Z,1528912127.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:48.267Z,1528912128.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:48.679Z,1528912128.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:49.069Z,1528912129.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:49.471Z,1528912129.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:49.888Z,1528912129.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:50.297Z,1528912130.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:50.680Z,1528912130.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:51.067Z,1528912131.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:51.471Z,1528912131.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:51.875Z,1528912131.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:52.268Z,1528912132.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:52.684Z,1528912132.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:53.077Z,1528912133.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:53.481Z,1528912133.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:53.485Z,1528912133.485 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T17:43:53.5Z
2018-06-13T17:48:53.485Z,1528912133.485 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T17:48:53.485Z,1528912133.485 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T17:48:53.873Z,1528912133.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:57.727Z,1528912137.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:57.817Z,1528912137.817 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0332.lzma
2018-06-13T17:48:57.888Z,1528912137.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:58.282Z,1528912138.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:48:58.618Z,1528912138.618 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0332.lzma.bak
2018-06-13T17:48:58.618Z,1528912138.618 [DataOverHttps](INFO): SBD MOMSN=8329659
2018-06-13T17:48:58.698Z,1528912138.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:00.633Z,1528912140.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:00.775Z,1528912140.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:01.170Z,1528912141.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:01.570Z,1528912141.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:01.969Z,1528912141.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:02.370Z,1528912142.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:02.774Z,1528912142.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:03.181Z,1528912143.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:03.588Z,1528912143.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:03.968Z,1528912143.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:04.372Z,1528912144.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:04.770Z,1528912144.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:05.169Z,1528912145.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:09.748Z,1528912149.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:09.924Z,1528912149.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:10.326Z,1528912150.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:10.727Z,1528912150.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:11.124Z,1528912151.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:11.514Z,1528912151.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:14.620Z,1528912154.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:14.739Z,1528912154.739 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0333.lzma
2018-06-13T17:49:14.779Z,1528912154.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:15.204Z,1528912155.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:15.534Z,1528912155.534 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0333.lzma.bak
2018-06-13T17:49:15.534Z,1528912155.534 [DataOverHttps](INFO): SBD MOMSN=8329661
2018-06-13T17:49:15.616Z,1528912155.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:17.475Z,1528912157.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:17.479Z,1528912157.479 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T17:49:17.479Z,1528912157.479 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T17:49:17.479Z,1528912157.479 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T17:49:17.623Z,1528912157.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:20.831Z,1528912160.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:21.011Z,1528912161.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:21.409Z,1528912161.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:21.814Z,1528912161.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:22.205Z,1528912162.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:22.608Z,1528912162.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:23.008Z,1528912163.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:23.417Z,1528912163.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:23.815Z,1528912163.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:24.215Z,1528912164.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:24.611Z,1528912164.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:24.989Z,1528912164.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:25.388Z,1528912165.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:25.788Z,1528912165.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:26.192Z,1528912166.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:26.620Z,1528912166.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:27.022Z,1528912167.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:27.419Z,1528912167.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:27.804Z,1528912167.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:28.189Z,1528912168.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:28.592Z,1528912168.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:29.000Z,1528912169.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:29.394Z,1528912169.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:29.800Z,1528912169.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:30.204Z,1528912170.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:30.600Z,1528912170.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:30.994Z,1528912170.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:31.396Z,1528912171.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:31.796Z,1528912171.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:32.231Z,1528912172.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:32.596Z,1528912172.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:32.996Z,1528912172.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:33.424Z,1528912173.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:33.805Z,1528912173.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:34.194Z,1528912174.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:34.601Z,1528912174.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:35.003Z,1528912175.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:35.396Z,1528912175.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:35.805Z,1528912175.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:36.206Z,1528912176.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:36.606Z,1528912176.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:36.996Z,1528912176.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:37.399Z,1528912177.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:37.792Z,1528912177.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:38.195Z,1528912178.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:38.599Z,1528912178.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:39.004Z,1528912179.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:39.405Z,1528912179.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:39.805Z,1528912179.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:40.192Z,1528912180.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:40.601Z,1528912180.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:41.001Z,1528912181.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:41.401Z,1528912181.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:41.850Z,1528912181.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:42.349Z,1528912182.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:42.710Z,1528912182.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:43.063Z,1528912183.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:43.502Z,1528912183.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:43.792Z,1528912183.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:44.200Z,1528912184.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:44.599Z,1528912184.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:45.002Z,1528912185.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:45.405Z,1528912185.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:45.812Z,1528912185.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:46.205Z,1528912186.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:46.596Z,1528912186.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:46.996Z,1528912186.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:47.392Z,1528912187.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:47.805Z,1528912187.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:48.211Z,1528912188.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:48.606Z,1528912188.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:48.996Z,1528912188.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:49.396Z,1528912189.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:49.803Z,1528912189.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:50.200Z,1528912190.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:50.604Z,1528912190.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:51.007Z,1528912191.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:51.409Z,1528912191.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:51.807Z,1528912191.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:52.210Z,1528912192.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:52.598Z,1528912192.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:53.004Z,1528912193.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:53.401Z,1528912193.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:53.812Z,1528912193.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:54.210Z,1528912194.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:54.602Z,1528912194.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:54.999Z,1528912194.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:55.399Z,1528912195.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:55.793Z,1528912195.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:56.198Z,1528912196.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:56.599Z,1528912196.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:57.002Z,1528912197.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:57.405Z,1528912197.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:57.810Z,1528912197.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:58.196Z,1528912198.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:58.601Z,1528912198.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:59.003Z,1528912199.003 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:59.004Z,1528912199.004 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 287
2018-06-13T17:49:59.004Z,1528912199.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:49:59.006Z,1528912199.006 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:59.006Z,1528912199.006 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 287
2018-06-13T17:49:59.006Z,1528912199.006 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:49:59.007Z,1528912199.007 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:49:59.008Z,1528912199.008 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 287
2018-06-13T17:49:59.008Z,1528912199.008 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:49:59.081Z,1528912199.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:49:59.081Z,1528912199.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:49:59.082Z,1528912199.082 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:49:59.473Z,1528912199.473 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:49:59.473Z,1528912199.473 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 287
2018-06-13T17:49:59.474Z,1528912199.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:49:59.474Z,1528912199.474 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 287
2018-06-13T17:49:59.474Z,1528912199.474 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:49:59.474Z,1528912199.474 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 287
2018-06-13T17:49:59.806Z,1528912199.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:49:59.807Z,1528912199.807 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:49:59.807Z,1528912199.807 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:49:59.808Z,1528912199.808 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:49:59.808Z,1528912199.808 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:49:59.808Z,1528912199.808 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:49:59.809Z,1528912199.809 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:49:59.809Z,1528912199.809 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:49:59.810Z,1528912199.810 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:50:00.210Z,1528912200.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:50:00.211Z,1528912200.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:00.610Z,1528912200.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:50:00.610Z,1528912200.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:01.004Z,1528912201.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:50:01.009Z,1528912201.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:01.397Z,1528912201.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:50:01.398Z,1528912201.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:01.784Z,1528912201.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:50:01.785Z,1528912201.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:02.201Z,1528912202.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:50:02.202Z,1528912202.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:02.590Z,1528912202.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:50:02.591Z,1528912202.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:03.018Z,1528912203.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:50:03.019Z,1528912203.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:03.415Z,1528912203.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:50:03.416Z,1528912203.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:03.817Z,1528912203.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:50:03.818Z,1528912203.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:04.221Z,1528912204.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:50:04.222Z,1528912204.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:04.592Z,1528912204.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:50:04.593Z,1528912204.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:04.996Z,1528912204.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:50:04.997Z,1528912204.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:05.395Z,1528912205.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:50:05.396Z,1528912205.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:05.803Z,1528912205.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:50:05.804Z,1528912205.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:06.203Z,1528912206.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:50:06.204Z,1528912206.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:06.594Z,1528912206.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:50:06.595Z,1528912206.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:06.993Z,1528912206.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:50:06.994Z,1528912206.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:07.395Z,1528912207.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:50:07.396Z,1528912207.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:07.793Z,1528912207.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:50:07.794Z,1528912207.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:08.202Z,1528912208.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:50:08.202Z,1528912208.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:08.605Z,1528912208.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:50:08.606Z,1528912208.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:09.001Z,1528912209.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:50:09.002Z,1528912209.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:09.404Z,1528912209.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:50:09.406Z,1528912209.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:09.805Z,1528912209.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:50:09.806Z,1528912209.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:10.200Z,1528912210.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:50:10.203Z,1528912210.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:10.595Z,1528912210.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:50:10.595Z,1528912210.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:10.997Z,1528912210.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:50:10.998Z,1528912210.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:11.400Z,1528912211.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:50:11.402Z,1528912211.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:11.804Z,1528912211.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:50:11.805Z,1528912211.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:12.212Z,1528912212.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:50:12.229Z,1528912212.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:12.612Z,1528912212.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:50:12.613Z,1528912212.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:12.994Z,1528912212.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:50:12.995Z,1528912212.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:13.396Z,1528912213.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:50:13.397Z,1528912213.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:13.805Z,1528912213.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:50:13.806Z,1528912213.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:14.206Z,1528912214.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:50:14.207Z,1528912214.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:14.599Z,1528912214.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:50:14.600Z,1528912214.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:15.002Z,1528912215.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:50:15.002Z,1528912215.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:15.407Z,1528912215.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:50:15.408Z,1528912215.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:15.804Z,1528912215.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:50:15.805Z,1528912215.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:16.191Z,1528912216.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:50:16.192Z,1528912216.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:16.640Z,1528912216.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:50:16.641Z,1528912216.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:17.016Z,1528912217.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:50:17.017Z,1528912217.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:17.388Z,1528912217.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:50:17.389Z,1528912217.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:17.811Z,1528912217.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:50:17.812Z,1528912217.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:18.212Z,1528912218.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:50:18.213Z,1528912218.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:18.610Z,1528912218.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:50:18.611Z,1528912218.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:19.000Z,1528912219.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T17:50:19.005Z,1528912219.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:19.399Z,1528912219.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:19.796Z,1528912219.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:20.200Z,1528912220.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:20.599Z,1528912220.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:21.004Z,1528912221.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:21.431Z,1528912221.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:21.808Z,1528912221.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:24.952Z,1528912224.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:25.127Z,1528912225.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:25.504Z,1528912225.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:25.900Z,1528912225.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:26.298Z,1528912226.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:26.701Z,1528912226.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:27.094Z,1528912227.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:27.488Z,1528912227.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:27.902Z,1528912227.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:28.300Z,1528912228.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:28.697Z,1528912228.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:29.100Z,1528912229.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:29.493Z,1528912229.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:29.895Z,1528912229.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:30.296Z,1528912230.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:30.694Z,1528912230.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:31.098Z,1528912231.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:31.509Z,1528912231.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:31.901Z,1528912231.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:32.298Z,1528912232.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:32.692Z,1528912232.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:33.077Z,1528912233.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:33.500Z,1528912233.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:33.906Z,1528912233.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:34.306Z,1528912234.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:34.706Z,1528912234.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:35.081Z,1528912235.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:35.480Z,1528912235.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:35.885Z,1528912235.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:36.285Z,1528912236.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:36.684Z,1528912236.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:37.105Z,1528912237.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:37.512Z,1528912237.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:37.907Z,1528912237.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:38.285Z,1528912238.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:38.688Z,1528912238.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:39.088Z,1528912239.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:39.488Z,1528912239.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:39.895Z,1528912239.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:40.296Z,1528912240.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:40.693Z,1528912240.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:41.084Z,1528912241.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:41.485Z,1528912241.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:41.884Z,1528912241.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:42.288Z,1528912242.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:42.685Z,1528912242.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:43.092Z,1528912243.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:43.497Z,1528912243.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:43.892Z,1528912243.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:44.285Z,1528912244.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:44.685Z,1528912244.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:45.083Z,1528912245.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:45.488Z,1528912245.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:45.890Z,1528912245.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:46.291Z,1528912246.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:46.691Z,1528912246.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:47.085Z,1528912247.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:47.485Z,1528912247.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:47.885Z,1528912247.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:48.287Z,1528912248.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:48.683Z,1528912248.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:49.091Z,1528912249.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:49.495Z,1528912249.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:49.892Z,1528912249.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:50.292Z,1528912250.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:50.685Z,1528912250.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:51.084Z,1528912251.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:51.486Z,1528912251.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:51.900Z,1528912251.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:52.292Z,1528912252.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:52.696Z,1528912252.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:53.087Z,1528912253.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:53.491Z,1528912253.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:53.888Z,1528912253.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:54.288Z,1528912254.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:54.686Z,1528912254.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:55.096Z,1528912255.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:55.504Z,1528912255.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:55.900Z,1528912255.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:56.293Z,1528912256.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:56.684Z,1528912256.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:57.090Z,1528912257.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:57.488Z,1528912257.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:57.897Z,1528912257.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:58.300Z,1528912258.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:58.700Z,1528912258.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:59.088Z,1528912259.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:59.487Z,1528912259.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:50:59.897Z,1528912259.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:00.286Z,1528912260.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:00.686Z,1528912260.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:01.098Z,1528912261.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:01.500Z,1528912261.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:01.900Z,1528912261.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:02.286Z,1528912262.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:02.700Z,1528912262.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:03.087Z,1528912263.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:03.488Z,1528912263.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:03.904Z,1528912263.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:04.304Z,1528912264.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:04.696Z,1528912264.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:05.090Z,1528912265.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:05.486Z,1528912265.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:05.888Z,1528912265.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:06.291Z,1528912266.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:06.692Z,1528912266.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:07.096Z,1528912267.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:07.500Z,1528912267.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:07.896Z,1528912267.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:08.288Z,1528912268.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:08.688Z,1528912268.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:09.087Z,1528912269.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:09.488Z,1528912269.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:09.900Z,1528912269.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:10.304Z,1528912270.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:10.704Z,1528912270.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:11.087Z,1528912271.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:11.491Z,1528912271.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:11.887Z,1528912271.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:12.292Z,1528912272.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:12.686Z,1528912272.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:13.096Z,1528912273.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:13.501Z,1528912273.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:13.896Z,1528912273.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:14.288Z,1528912274.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:14.687Z,1528912274.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:15.087Z,1528912275.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:15.487Z,1528912275.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:15.901Z,1528912275.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:16.304Z,1528912276.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:16.697Z,1528912276.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:17.091Z,1528912277.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:17.492Z,1528912277.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:17.890Z,1528912277.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:18.300Z,1528912278.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:18.687Z,1528912278.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:19.104Z,1528912279.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:19.504Z,1528912279.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:19.899Z,1528912279.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:20.288Z,1528912280.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:20.692Z,1528912280.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:21.092Z,1528912281.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:21.498Z,1528912281.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:21.904Z,1528912281.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:25.008Z,1528912285.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:25.200Z,1528912285.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:25.560Z,1528912285.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:25.960Z,1528912285.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:26.357Z,1528912286.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:26.756Z,1528912286.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:27.184Z,1528912287.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:27.588Z,1528912287.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:27.972Z,1528912287.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:28.364Z,1528912288.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:28.758Z,1528912288.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:29.168Z,1528912289.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:29.557Z,1528912289.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:29.965Z,1528912289.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:30.368Z,1528912290.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:30.764Z,1528912290.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:31.160Z,1528912291.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:31.558Z,1528912291.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:31.954Z,1528912291.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:32.357Z,1528912292.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:32.759Z,1528912292.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:33.164Z,1528912293.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:33.566Z,1528912293.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:33.967Z,1528912293.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:34.357Z,1528912294.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:34.757Z,1528912294.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:35.172Z,1528912295.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:35.558Z,1528912295.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:35.972Z,1528912295.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:36.368Z,1528912296.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:36.772Z,1528912296.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:37.159Z,1528912297.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:37.559Z,1528912297.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:37.960Z,1528912297.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:38.363Z,1528912298.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:38.772Z,1528912298.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:39.169Z,1528912299.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:39.576Z,1528912299.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:39.974Z,1528912299.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:40.364Z,1528912300.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:40.760Z,1528912300.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:41.164Z,1528912301.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:41.556Z,1528912301.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:41.973Z,1528912301.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:42.374Z,1528912302.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:42.770Z,1528912302.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:43.168Z,1528912303.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:43.568Z,1528912303.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:43.966Z,1528912303.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:44.362Z,1528912304.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:44.778Z,1528912304.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:45.170Z,1528912305.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:45.580Z,1528912305.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:45.974Z,1528912305.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:46.366Z,1528912306.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:46.760Z,1528912306.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:47.164Z,1528912307.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:47.561Z,1528912307.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:47.968Z,1528912307.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:48.380Z,1528912308.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:48.765Z,1528912308.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:49.160Z,1528912309.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:49.566Z,1528912309.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:49.969Z,1528912309.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:50.368Z,1528912310.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:50.752Z,1528912310.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:51.178Z,1528912311.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:51.580Z,1528912311.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:51.977Z,1528912311.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:52.376Z,1528912312.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:52.760Z,1528912312.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:53.156Z,1528912313.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:53.551Z,1528912313.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:53.980Z,1528912313.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:54.383Z,1528912314.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:54.781Z,1528912314.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:55.154Z,1528912315.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:55.556Z,1528912315.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:55.951Z,1528912315.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:56.356Z,1528912316.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:56.756Z,1528912316.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:57.179Z,1528912317.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:57.582Z,1528912317.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:57.990Z,1528912317.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:58.359Z,1528912318.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:58.755Z,1528912318.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:59.160Z,1528912319.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:59.555Z,1528912319.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:51:59.963Z,1528912319.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:00.367Z,1528912320.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:00.768Z,1528912320.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:01.159Z,1528912321.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:01.559Z,1528912321.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:01.955Z,1528912321.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:02.364Z,1528912322.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:02.759Z,1528912322.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:03.168Z,1528912323.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:03.566Z,1528912323.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:03.987Z,1528912323.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:04.360Z,1528912324.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:04.758Z,1528912324.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:05.167Z,1528912325.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:05.558Z,1528912325.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:05.965Z,1528912325.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:06.368Z,1528912326.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:06.764Z,1528912326.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:07.160Z,1528912327.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:07.572Z,1528912327.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:07.972Z,1528912327.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:08.367Z,1528912328.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:08.768Z,1528912328.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:09.156Z,1528912329.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:09.559Z,1528912329.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:09.960Z,1528912329.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:10.356Z,1528912330.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:10.759Z,1528912330.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:11.167Z,1528912331.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:11.568Z,1528912331.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:11.968Z,1528912331.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:12.359Z,1528912332.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:12.768Z,1528912332.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:13.160Z,1528912333.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:13.563Z,1528912333.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:13.964Z,1528912333.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:14.372Z,1528912334.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:14.776Z,1528912334.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:15.157Z,1528912335.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:15.562Z,1528912335.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:15.968Z,1528912335.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:16.371Z,1528912336.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:16.768Z,1528912336.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:17.164Z,1528912337.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:17.564Z,1528912337.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:17.976Z,1528912337.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:18.372Z,1528912338.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:18.772Z,1528912338.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:19.163Z,1528912339.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:19.565Z,1528912339.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:19.969Z,1528912339.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:20.376Z,1528912340.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:20.773Z,1528912340.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:21.160Z,1528912341.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:21.566Z,1528912341.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:21.977Z,1528912341.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:25.075Z,1528912345.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:25.248Z,1528912345.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:25.612Z,1528912345.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:26.009Z,1528912346.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:26.410Z,1528912346.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:26.811Z,1528912346.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:27.218Z,1528912347.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:27.622Z,1528912347.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:28.022Z,1528912348.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:28.419Z,1528912348.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:28.818Z,1528912348.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:29.214Z,1528912349.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:29.614Z,1528912349.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:30.018Z,1528912350.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:30.423Z,1528912350.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:30.821Z,1528912350.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:31.208Z,1528912351.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:31.611Z,1528912351.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:32.008Z,1528912352.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:32.410Z,1528912352.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:32.811Z,1528912352.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:33.228Z,1528912353.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:33.621Z,1528912353.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:34.022Z,1528912354.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:34.413Z,1528912354.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:34.808Z,1528912354.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:35.226Z,1528912355.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:35.608Z,1528912355.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:36.017Z,1528912356.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:36.417Z,1528912356.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:36.817Z,1528912356.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:37.209Z,1528912357.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:37.612Z,1528912357.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:38.008Z,1528912358.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:38.410Z,1528912358.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:38.811Z,1528912358.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:39.218Z,1528912359.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:39.615Z,1528912359.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:40.030Z,1528912360.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:40.408Z,1528912360.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:40.808Z,1528912360.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:41.212Z,1528912361.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:41.608Z,1528912361.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:42.018Z,1528912362.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:42.417Z,1528912362.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:42.824Z,1528912362.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:43.209Z,1528912363.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:43.611Z,1528912363.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:44.017Z,1528912364.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:44.416Z,1528912364.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:44.822Z,1528912364.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:45.209Z,1528912365.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:45.616Z,1528912365.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:46.018Z,1528912366.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:46.416Z,1528912366.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:46.819Z,1528912366.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:47.220Z,1528912367.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:47.614Z,1528912367.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:48.018Z,1528912368.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:48.423Z,1528912368.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:48.815Z,1528912368.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:49.220Z,1528912369.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:49.626Z,1528912369.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:50.014Z,1528912370.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:50.423Z,1528912370.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:50.834Z,1528912370.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:51.216Z,1528912371.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:51.617Z,1528912371.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:52.027Z,1528912372.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:52.423Z,1528912372.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:52.831Z,1528912372.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:53.201Z,1528912373.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:53.601Z,1528912373.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:54.030Z,1528912374.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:54.428Z,1528912374.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:54.829Z,1528912374.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:55.205Z,1528912375.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:55.603Z,1528912375.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:56.027Z,1528912376.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:56.433Z,1528912376.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:56.834Z,1528912376.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:57.208Z,1528912377.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:57.603Z,1528912377.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:58.035Z,1528912378.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:58.435Z,1528912378.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:58.832Z,1528912378.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:59.204Z,1528912379.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:52:59.599Z,1528912379.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:00.032Z,1528912380.032 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:00.032Z,1528912380.032 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 288
2018-06-13T17:53:00.032Z,1528912380.032 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:53:00.034Z,1528912380.034 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:00.034Z,1528912380.034 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 288
2018-06-13T17:53:00.034Z,1528912380.034 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:53:00.036Z,1528912380.036 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:00.036Z,1528912380.036 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 288
2018-06-13T17:53:00.036Z,1528912380.036 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:53:00.113Z,1528912380.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:53:00.113Z,1528912380.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:53:00.114Z,1528912380.114 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:53:00.513Z,1528912380.513 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:53:00.513Z,1528912380.513 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 288
2018-06-13T17:53:00.514Z,1528912380.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:53:00.514Z,1528912380.514 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 288
2018-06-13T17:53:00.514Z,1528912380.514 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:53:00.514Z,1528912380.514 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 288
2018-06-13T17:53:00.811Z,1528912380.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:53:00.812Z,1528912380.812 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:53:00.812Z,1528912380.812 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:53:00.812Z,1528912380.812 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:53:00.813Z,1528912380.813 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:53:00.813Z,1528912380.813 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:53:00.813Z,1528912380.813 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:53:00.814Z,1528912380.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:53:00.814Z,1528912380.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:53:01.207Z,1528912381.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:53:01.208Z,1528912381.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:01.605Z,1528912381.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:53:01.606Z,1528912381.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:02.012Z,1528912382.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:53:02.013Z,1528912382.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:02.415Z,1528912382.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:53:02.416Z,1528912382.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:02.814Z,1528912382.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:53:02.815Z,1528912382.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:03.207Z,1528912383.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:53:03.208Z,1528912383.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:03.605Z,1528912383.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:53:03.606Z,1528912383.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:04.019Z,1528912384.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:53:04.020Z,1528912384.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:04.414Z,1528912384.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:53:04.415Z,1528912384.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:04.815Z,1528912384.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:53:04.816Z,1528912384.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:05.209Z,1528912385.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:53:05.210Z,1528912385.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:05.607Z,1528912385.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:53:05.608Z,1528912385.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:06.014Z,1528912386.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:53:06.015Z,1528912386.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:06.414Z,1528912386.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:53:06.415Z,1528912386.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:06.812Z,1528912386.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:53:06.813Z,1528912386.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:07.210Z,1528912387.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:53:07.211Z,1528912387.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:07.607Z,1528912387.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:53:07.608Z,1528912387.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:08.016Z,1528912388.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:53:08.016Z,1528912388.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:08.415Z,1528912388.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:53:08.416Z,1528912388.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:08.819Z,1528912388.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:53:08.820Z,1528912388.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:09.214Z,1528912389.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:53:09.215Z,1528912389.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:09.607Z,1528912389.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:53:09.608Z,1528912389.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:10.020Z,1528912390.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:53:10.021Z,1528912390.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:10.415Z,1528912390.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:53:10.415Z,1528912390.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:10.812Z,1528912390.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:53:10.813Z,1528912390.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:11.203Z,1528912391.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:53:11.204Z,1528912391.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:11.606Z,1528912391.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:53:11.607Z,1528912391.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:12.012Z,1528912392.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:53:12.013Z,1528912392.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:12.419Z,1528912392.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:53:12.420Z,1528912392.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:12.815Z,1528912392.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:53:12.816Z,1528912392.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:13.208Z,1528912393.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:53:13.209Z,1528912393.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:13.609Z,1528912393.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:53:13.610Z,1528912393.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:14.012Z,1528912394.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:53:14.013Z,1528912394.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:14.414Z,1528912394.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:53:14.415Z,1528912394.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:14.819Z,1528912394.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:53:14.820Z,1528912394.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:15.214Z,1528912395.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:53:15.215Z,1528912395.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:15.607Z,1528912395.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:53:15.608Z,1528912395.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:16.015Z,1528912396.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:53:16.016Z,1528912396.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:16.415Z,1528912396.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:53:16.416Z,1528912396.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:16.812Z,1528912396.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:53:16.813Z,1528912396.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:17.208Z,1528912397.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:53:17.209Z,1528912397.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:17.610Z,1528912397.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:53:17.611Z,1528912397.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:18.015Z,1528912398.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T17:53:18.016Z,1528912398.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:18.423Z,1528912398.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T17:53:18.424Z,1528912398.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:18.815Z,1528912398.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T17:53:18.816Z,1528912398.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:19.210Z,1528912399.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T17:53:19.211Z,1528912399.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:19.610Z,1528912399.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T17:53:19.611Z,1528912399.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:20.015Z,1528912400.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T17:53:20.016Z,1528912400.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:20.424Z,1528912400.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:20.824Z,1528912400.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:21.216Z,1528912401.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:21.611Z,1528912401.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:22.012Z,1528912402.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:25.149Z,1528912405.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:25.324Z,1528912405.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:25.712Z,1528912405.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:26.097Z,1528912406.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:26.505Z,1528912406.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:26.904Z,1528912406.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:27.303Z,1528912407.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:27.708Z,1528912407.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:28.108Z,1528912408.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:28.480Z,1528912408.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:28.884Z,1528912408.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:29.285Z,1528912409.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:29.708Z,1528912409.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:30.115Z,1528912410.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:30.514Z,1528912410.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:30.912Z,1528912410.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:31.283Z,1528912411.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:31.685Z,1528912411.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:32.084Z,1528912412.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:32.484Z,1528912412.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:32.884Z,1528912412.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:33.315Z,1528912413.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:33.695Z,1528912413.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:34.120Z,1528912414.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:34.484Z,1528912414.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:34.887Z,1528912414.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:35.287Z,1528912415.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:35.682Z,1528912415.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:36.095Z,1528912416.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:36.495Z,1528912416.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:36.888Z,1528912416.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:37.292Z,1528912417.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:37.687Z,1528912417.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:38.088Z,1528912418.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:38.496Z,1528912418.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:38.918Z,1528912418.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:39.288Z,1528912419.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:39.685Z,1528912419.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:40.096Z,1528912420.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:40.495Z,1528912420.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:40.891Z,1528912420.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:41.292Z,1528912421.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:41.682Z,1528912421.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:42.091Z,1528912422.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:42.495Z,1528912422.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:42.892Z,1528912422.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:43.286Z,1528912423.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:43.687Z,1528912423.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:44.087Z,1528912424.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:44.494Z,1528912424.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:44.895Z,1528912424.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:45.286Z,1528912425.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:45.685Z,1528912425.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:46.095Z,1528912426.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:46.495Z,1528912426.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:46.891Z,1528912426.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:47.287Z,1528912427.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:47.686Z,1528912427.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:48.092Z,1528912428.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:48.495Z,1528912428.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:48.891Z,1528912428.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:49.286Z,1528912429.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:49.688Z,1528912429.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:50.104Z,1528912430.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:50.495Z,1528912430.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:50.895Z,1528912430.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:51.285Z,1528912431.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:51.687Z,1528912431.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:52.100Z,1528912432.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:52.495Z,1528912432.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:52.892Z,1528912432.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:53.288Z,1528912433.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:53.691Z,1528912433.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:54.046Z,1528912434.046 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T17:53:54.047Z,1528912434.047 [NAL9602] Data Fault, FailCount= 4
2018-06-13T17:53:54.047Z,1528912434.047 [NAL9602](ERROR): Data Fault
2018-06-13T17:53:54.104Z,1528912434.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:54.193Z,1528912434.193 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T17:53:54.446Z,1528912434.446 [NAL9602](INFO): Powering down
2018-06-13T17:53:54.500Z,1528912434.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:54.884Z,1528912434.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:55.286Z,1528912435.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:55.365Z,1528912435.365 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T17:53:55.365Z,1528912435.365 [NAL9602] No Fault, FailCount= 4
2018-06-13T17:53:55.686Z,1528912435.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:56.083Z,1528912436.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:56.486Z,1528912436.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:56.885Z,1528912436.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:57.284Z,1528912437.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:57.687Z,1528912437.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:58.085Z,1528912438.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:58.486Z,1528912438.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:58.886Z,1528912438.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:59.292Z,1528912439.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:53:59.684Z,1528912439.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:00.087Z,1528912440.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:00.486Z,1528912440.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:00.883Z,1528912440.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:01.323Z,1528912441.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:01.685Z,1528912441.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:02.084Z,1528912442.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:02.487Z,1528912442.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:02.885Z,1528912442.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:03.283Z,1528912443.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:03.692Z,1528912443.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:04.086Z,1528912444.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:04.484Z,1528912444.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:04.892Z,1528912444.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:05.286Z,1528912445.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:05.683Z,1528912445.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:06.092Z,1528912446.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:06.486Z,1528912446.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:06.883Z,1528912446.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:07.292Z,1528912447.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:07.685Z,1528912447.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:08.083Z,1528912448.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:08.492Z,1528912448.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:08.885Z,1528912448.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:09.284Z,1528912449.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:09.692Z,1528912449.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:10.090Z,1528912450.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:10.483Z,1528912450.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:10.884Z,1528912450.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:11.286Z,1528912451.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:11.685Z,1528912451.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:12.089Z,1528912452.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:12.486Z,1528912452.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:12.895Z,1528912452.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:13.292Z,1528912453.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:13.690Z,1528912453.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:14.096Z,1528912454.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:14.488Z,1528912454.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:14.890Z,1528912454.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:15.293Z,1528912455.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:15.700Z,1528912455.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:16.092Z,1528912456.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:16.501Z,1528912456.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:16.897Z,1528912456.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:17.276Z,1528912457.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:17.680Z,1528912457.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:17.683Z,1528912457.683 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T17:54:17.683Z,1528912457.683 [Default:CheckIn:C.Wait] Stopped
2018-06-13T17:54:17.683Z,1528912457.683 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T17:54:17.683Z,1528912457.683 [Default:CheckIn:D] Running Loop=1
2018-06-13T17:54:18.095Z,1528912458.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:18.099Z,1528912458.099 [Default:CheckIn:D] Stopped
2018-06-13T17:54:18.099Z,1528912458.099 [Default:CheckIn:E] Running Loop=1
2018-06-13T17:54:18.487Z,1528912458.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:18.517Z,1528912458.517 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 867.077539 min 
2018-06-13T17:54:18.517Z,1528912458.517 [Default:CheckIn:E] Stopped
2018-06-13T17:54:18.518Z,1528912458.518 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T17:54:18.518Z,1528912458.518 [Default:CheckIn] Stopped
2018-06-13T17:54:18.518Z,1528912458.518 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T17:54:18.518Z,1528912458.518 [Default:CheckIn](INFO): Running loop #84
2018-06-13T17:54:18.518Z,1528912458.518 [Default:CheckIn] Running Loop=84
2018-06-13T17:54:18.518Z,1528912458.518 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T17:54:18.518Z,1528912458.518 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T17:54:18.881Z,1528912458.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:19.288Z,1528912459.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:19.683Z,1528912459.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:22.816Z,1528912462.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:22.988Z,1528912462.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:23.365Z,1528912463.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:23.771Z,1528912463.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:24.168Z,1528912464.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:24.518Z,1528912464.518 [NAL9602](INFO): Powering up NAL9602
2018-06-13T17:54:24.574Z,1528912464.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:24.956Z,1528912464.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:25.370Z,1528912465.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:25.774Z,1528912465.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:26.170Z,1528912466.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:26.569Z,1528912466.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:26.971Z,1528912466.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:27.348Z,1528912467.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:27.772Z,1528912467.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:28.151Z,1528912468.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:28.556Z,1528912468.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:28.977Z,1528912468.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:29.360Z,1528912469.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:29.751Z,1528912469.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:30.155Z,1528912470.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:30.555Z,1528912470.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:30.953Z,1528912470.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:31.355Z,1528912471.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:31.755Z,1528912471.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:32.153Z,1528912472.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:32.556Z,1528912472.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:32.955Z,1528912472.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:33.353Z,1528912473.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:33.756Z,1528912473.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:34.158Z,1528912474.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:34.556Z,1528912474.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:34.983Z,1528912474.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:35.321Z,1528912475.321 [NAL9602](INFO): NAL9602 initialized
2018-06-13T17:54:35.360Z,1528912475.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:35.757Z,1528912475.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:36.188Z,1528912476.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:36.568Z,1528912476.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:36.960Z,1528912476.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:37.360Z,1528912477.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:37.758Z,1528912477.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:38.155Z,1528912478.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:38.568Z,1528912478.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:38.967Z,1528912478.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:39.363Z,1528912479.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:39.761Z,1528912479.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:40.167Z,1528912480.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:40.566Z,1528912480.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:40.966Z,1528912480.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:41.370Z,1528912481.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:41.772Z,1528912481.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:42.180Z,1528912482.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:42.571Z,1528912482.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:42.964Z,1528912482.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:43.372Z,1528912483.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:43.773Z,1528912483.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:44.148Z,1528912484.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:44.571Z,1528912484.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:44.984Z,1528912484.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:45.379Z,1528912485.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:45.752Z,1528912485.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:46.152Z,1528912486.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:46.551Z,1528912486.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:46.961Z,1528912486.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:47.367Z,1528912487.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:47.767Z,1528912487.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:48.168Z,1528912488.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:48.557Z,1528912488.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:48.957Z,1528912488.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:49.358Z,1528912489.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:49.758Z,1528912489.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:50.155Z,1528912490.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:50.567Z,1528912490.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:50.967Z,1528912490.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:51.359Z,1528912491.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:51.759Z,1528912491.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:52.164Z,1528912492.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:52.558Z,1528912492.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:52.960Z,1528912492.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:53.367Z,1528912493.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:53.766Z,1528912493.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:54.167Z,1528912494.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:54.557Z,1528912494.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:54.958Z,1528912494.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:55.358Z,1528912495.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:55.759Z,1528912495.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:56.154Z,1528912496.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:56.567Z,1528912496.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:56.967Z,1528912496.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:57.363Z,1528912497.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:57.759Z,1528912497.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:58.158Z,1528912498.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:58.558Z,1528912498.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:58.959Z,1528912498.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:59.363Z,1528912499.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:54:59.767Z,1528912499.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:00.167Z,1528912500.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:00.559Z,1528912500.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:00.958Z,1528912500.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:01.364Z,1528912501.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:01.757Z,1528912501.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:02.158Z,1528912502.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:02.568Z,1528912502.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:02.972Z,1528912502.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:03.367Z,1528912503.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:03.759Z,1528912503.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:04.159Z,1528912504.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:04.559Z,1528912504.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:04.960Z,1528912504.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:05.363Z,1528912505.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:05.766Z,1528912505.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:06.166Z,1528912506.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:06.559Z,1528912506.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:06.958Z,1528912506.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:07.363Z,1528912507.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:07.767Z,1528912507.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:08.158Z,1528912508.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:08.567Z,1528912508.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:08.967Z,1528912508.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:09.368Z,1528912509.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:09.759Z,1528912509.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:10.167Z,1528912510.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:10.559Z,1528912510.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:10.961Z,1528912510.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:11.366Z,1528912511.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:11.768Z,1528912511.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:12.169Z,1528912512.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:12.559Z,1528912512.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:12.958Z,1528912512.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:13.369Z,1528912513.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:13.756Z,1528912513.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:14.169Z,1528912514.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:14.574Z,1528912514.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:14.973Z,1528912514.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:15.371Z,1528912515.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:15.762Z,1528912515.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:16.168Z,1528912516.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:16.562Z,1528912516.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:16.962Z,1528912516.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:17.370Z,1528912517.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:17.771Z,1528912517.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:18.184Z,1528912518.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:18.562Z,1528912518.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:18.966Z,1528912518.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:19.361Z,1528912519.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:19.766Z,1528912519.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:22.876Z,1528912522.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:23.059Z,1528912523.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:23.430Z,1528912523.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:23.830Z,1528912523.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:24.221Z,1528912524.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:24.624Z,1528912524.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:25.015Z,1528912525.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:25.428Z,1528912525.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:25.825Z,1528912525.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:26.232Z,1528912526.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:26.620Z,1528912526.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:27.023Z,1528912527.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:27.414Z,1528912527.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:27.814Z,1528912527.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:28.213Z,1528912528.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:28.626Z,1528912528.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:29.027Z,1528912529.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:29.423Z,1528912529.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:29.820Z,1528912529.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:30.220Z,1528912530.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:30.615Z,1528912530.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:31.014Z,1528912531.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:31.428Z,1528912531.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:31.827Z,1528912531.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:32.232Z,1528912532.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:32.614Z,1528912532.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:33.015Z,1528912533.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:33.414Z,1528912533.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:33.815Z,1528912533.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:34.215Z,1528912534.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:34.627Z,1528912534.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:35.026Z,1528912535.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:35.422Z,1528912535.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:35.819Z,1528912535.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:36.213Z,1528912536.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:36.618Z,1528912536.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:37.014Z,1528912537.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:37.422Z,1528912537.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:37.826Z,1528912537.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:38.232Z,1528912538.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:38.614Z,1528912538.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:39.015Z,1528912539.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:39.415Z,1528912539.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:39.814Z,1528912539.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:40.216Z,1528912540.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:40.628Z,1528912540.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:41.026Z,1528912541.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:41.424Z,1528912541.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:41.815Z,1528912541.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:42.224Z,1528912542.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:42.627Z,1528912542.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:43.015Z,1528912543.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:43.428Z,1528912543.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:43.827Z,1528912543.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:44.225Z,1528912544.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:44.620Z,1528912544.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:45.017Z,1528912545.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:45.415Z,1528912545.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:45.814Z,1528912545.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:46.223Z,1528912546.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:46.627Z,1528912546.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:47.032Z,1528912547.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:47.423Z,1528912547.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:47.819Z,1528912547.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:48.220Z,1528912548.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:48.624Z,1528912548.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:49.020Z,1528912549.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:49.422Z,1528912549.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:49.826Z,1528912549.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:50.221Z,1528912550.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:50.624Z,1528912550.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:51.025Z,1528912551.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:51.420Z,1528912551.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:51.824Z,1528912551.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:52.283Z,1528912552.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:52.623Z,1528912552.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:53.027Z,1528912553.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:53.432Z,1528912553.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:53.810Z,1528912553.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:54.221Z,1528912554.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:54.606Z,1528912554.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:55.008Z,1528912555.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:55.437Z,1528912555.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:55.833Z,1528912555.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:56.234Z,1528912556.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:56.608Z,1528912556.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:57.004Z,1528912557.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:57.409Z,1528912557.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:57.822Z,1528912557.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:58.216Z,1528912558.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:58.638Z,1528912558.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:59.035Z,1528912559.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:59.420Z,1528912559.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:55:59.808Z,1528912559.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:00.216Z,1528912560.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:00.612Z,1528912560.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:01.008Z,1528912561.008 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:01.008Z,1528912561.008 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 289
2018-06-13T17:56:01.008Z,1528912561.008 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:56:01.010Z,1528912561.010 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:01.010Z,1528912561.010 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 289
2018-06-13T17:56:01.010Z,1528912561.010 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:56:01.012Z,1528912561.012 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:01.012Z,1528912561.012 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 289
2018-06-13T17:56:01.012Z,1528912561.012 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:56:01.089Z,1528912561.089 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:56:01.089Z,1528912561.089 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:56:01.090Z,1528912561.090 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:56:01.505Z,1528912561.505 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:56:01.505Z,1528912561.505 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 289
2018-06-13T17:56:01.506Z,1528912561.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:56:01.506Z,1528912561.506 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 289
2018-06-13T17:56:01.506Z,1528912561.506 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:56:01.506Z,1528912561.506 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 289
2018-06-13T17:56:01.827Z,1528912561.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:56:01.827Z,1528912561.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:56:01.828Z,1528912561.828 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:56:01.828Z,1528912561.828 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:56:01.828Z,1528912561.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:56:01.845Z,1528912561.845 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:56:01.845Z,1528912561.845 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:56:01.846Z,1528912561.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:56:01.846Z,1528912561.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:56:02.228Z,1528912562.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:56:02.229Z,1528912562.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:02.611Z,1528912562.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:56:02.612Z,1528912562.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:03.013Z,1528912563.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:56:03.014Z,1528912563.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:03.412Z,1528912563.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:56:03.412Z,1528912563.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:03.812Z,1528912563.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:56:03.813Z,1528912563.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:04.217Z,1528912564.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:56:04.218Z,1528912564.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:04.622Z,1528912564.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:56:04.623Z,1528912564.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:05.023Z,1528912565.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:56:05.024Z,1528912565.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:05.424Z,1528912565.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:56:05.425Z,1528912565.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:05.817Z,1528912565.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:56:05.818Z,1528912565.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:06.220Z,1528912566.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:56:06.221Z,1528912566.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:06.621Z,1528912566.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:56:06.622Z,1528912566.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:07.019Z,1528912567.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:56:07.020Z,1528912567.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:07.428Z,1528912567.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:56:07.429Z,1528912567.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:07.826Z,1528912567.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:56:07.827Z,1528912567.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:08.223Z,1528912568.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:56:08.224Z,1528912568.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:08.620Z,1528912568.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:56:08.625Z,1528912568.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:09.020Z,1528912569.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:56:09.025Z,1528912569.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:09.401Z,1528912569.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:56:09.402Z,1528912569.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:09.805Z,1528912569.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:56:09.806Z,1528912569.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:10.221Z,1528912570.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:56:10.222Z,1528912570.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:10.615Z,1528912570.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:56:10.616Z,1528912570.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:11.018Z,1528912571.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:56:11.019Z,1528912571.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:11.416Z,1528912571.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:56:11.417Z,1528912571.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:11.807Z,1528912571.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:56:11.808Z,1528912571.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:12.211Z,1528912572.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:56:12.212Z,1528912572.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:12.610Z,1528912572.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:56:12.611Z,1528912572.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:13.007Z,1528912573.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:56:13.008Z,1528912573.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:13.419Z,1528912573.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:56:13.420Z,1528912573.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:13.819Z,1528912573.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:56:13.820Z,1528912573.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:14.219Z,1528912574.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:56:14.220Z,1528912574.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:14.608Z,1528912574.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:56:14.609Z,1528912574.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:15.010Z,1528912575.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:56:15.011Z,1528912575.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:15.407Z,1528912575.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:56:15.408Z,1528912575.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:15.810Z,1528912575.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:56:15.811Z,1528912575.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:16.211Z,1528912576.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:56:16.212Z,1528912576.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:16.615Z,1528912576.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:56:16.616Z,1528912576.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:17.018Z,1528912577.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:56:17.019Z,1528912577.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:17.415Z,1528912577.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:56:17.416Z,1528912577.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:17.808Z,1528912577.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:56:17.809Z,1528912577.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:18.214Z,1528912578.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T17:56:18.215Z,1528912578.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:18.622Z,1528912578.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T17:56:18.623Z,1528912578.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:21.717Z,1528912581.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:21.896Z,1528912581.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:22.296Z,1528912582.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:22.674Z,1528912582.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:23.072Z,1528912583.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:23.467Z,1528912583.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:23.865Z,1528912583.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:24.267Z,1528912584.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:24.671Z,1528912584.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:25.071Z,1528912585.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:25.495Z,1528912585.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:25.878Z,1528912585.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:26.269Z,1528912586.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:26.681Z,1528912586.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:27.076Z,1528912587.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:27.478Z,1528912587.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:27.877Z,1528912587.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:28.276Z,1528912588.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:28.665Z,1528912588.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:29.068Z,1528912589.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:29.471Z,1528912589.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:29.864Z,1528912589.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:30.266Z,1528912590.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:30.678Z,1528912590.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:31.077Z,1528912591.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:31.476Z,1528912591.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:31.871Z,1528912591.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:32.263Z,1528912592.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:32.668Z,1528912592.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:33.070Z,1528912593.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:33.476Z,1528912593.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:33.880Z,1528912593.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:34.277Z,1528912594.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:34.663Z,1528912594.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:35.080Z,1528912595.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:35.471Z,1528912595.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:35.874Z,1528912595.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:36.276Z,1528912596.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:36.682Z,1528912596.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:37.078Z,1528912597.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:37.477Z,1528912597.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:37.879Z,1528912597.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:38.265Z,1528912598.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:38.676Z,1528912598.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:39.079Z,1528912599.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:39.482Z,1528912599.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:39.881Z,1528912599.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:40.277Z,1528912600.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:40.675Z,1528912600.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:41.073Z,1528912601.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:41.483Z,1528912601.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:41.871Z,1528912601.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:42.273Z,1528912602.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:42.684Z,1528912602.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:43.078Z,1528912603.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:43.482Z,1528912603.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:43.877Z,1528912603.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:44.284Z,1528912604.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:44.683Z,1528912604.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:45.080Z,1528912605.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:45.479Z,1528912605.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:45.892Z,1528912605.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:46.288Z,1528912606.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:46.665Z,1528912606.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:47.060Z,1528912607.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:47.484Z,1528912607.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:47.865Z,1528912607.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:48.264Z,1528912608.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:48.691Z,1528912608.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:49.086Z,1528912609.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:49.488Z,1528912609.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:49.864Z,1528912609.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:50.260Z,1528912610.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:50.664Z,1528912610.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:51.065Z,1528912611.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:51.488Z,1528912611.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:51.892Z,1528912611.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:52.295Z,1528912612.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:52.664Z,1528912612.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:53.065Z,1528912613.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:53.464Z,1528912613.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:53.864Z,1528912613.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:54.263Z,1528912614.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:54.675Z,1528912614.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:55.072Z,1528912615.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:55.471Z,1528912615.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:55.867Z,1528912615.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:56.266Z,1528912616.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:56.664Z,1528912616.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:57.070Z,1528912617.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:57.477Z,1528912617.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:57.883Z,1528912617.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:58.276Z,1528912618.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:58.664Z,1528912618.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:59.068Z,1528912619.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:59.467Z,1528912619.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:56:59.865Z,1528912619.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:00.268Z,1528912620.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:00.677Z,1528912620.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:01.076Z,1528912621.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:01.478Z,1528912621.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:01.871Z,1528912621.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:02.268Z,1528912622.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:02.676Z,1528912622.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:03.070Z,1528912623.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:03.477Z,1528912623.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:03.879Z,1528912623.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:04.276Z,1528912624.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:04.669Z,1528912624.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:05.070Z,1528912625.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:05.473Z,1528912625.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:05.864Z,1528912625.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:06.272Z,1528912626.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:06.675Z,1528912626.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:07.077Z,1528912627.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:07.484Z,1528912627.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:07.870Z,1528912627.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:08.263Z,1528912628.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:08.671Z,1528912628.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:09.066Z,1528912629.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:09.478Z,1528912629.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:09.880Z,1528912629.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:10.279Z,1528912630.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:10.668Z,1528912630.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:11.068Z,1528912631.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:11.465Z,1528912631.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:11.868Z,1528912631.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:12.276Z,1528912632.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:12.684Z,1528912632.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:13.076Z,1528912633.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:13.481Z,1528912633.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:13.870Z,1528912633.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:14.268Z,1528912634.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:14.668Z,1528912634.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:15.079Z,1528912635.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:15.477Z,1528912635.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:15.884Z,1528912635.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:16.278Z,1528912636.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:16.667Z,1528912636.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:17.076Z,1528912637.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:17.484Z,1528912637.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:17.880Z,1528912637.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:18.288Z,1528912638.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:18.670Z,1528912638.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:21.778Z,1528912641.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:21.929Z,1528912641.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:22.312Z,1528912642.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:22.330Z,1528912642.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:22.708Z,1528912642.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:22.726Z,1528912642.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:23.087Z,1528912643.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:23.120Z,1528912643.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:23.520Z,1528912643.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:23.912Z,1528912643.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:24.312Z,1528912644.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:24.720Z,1528912644.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:25.126Z,1528912645.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:25.521Z,1528912645.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:25.913Z,1528912645.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:26.317Z,1528912646.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:26.714Z,1528912646.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:27.115Z,1528912647.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:27.526Z,1528912647.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:27.932Z,1528912647.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:28.321Z,1528912648.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:28.714Z,1528912648.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:29.113Z,1528912649.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:29.524Z,1528912649.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:29.920Z,1528912649.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:30.312Z,1528912650.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:30.721Z,1528912650.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:31.130Z,1528912651.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:31.521Z,1528912651.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:31.915Z,1528912651.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:32.313Z,1528912652.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:32.717Z,1528912652.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:33.113Z,1528912653.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:33.526Z,1528912653.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:33.925Z,1528912653.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:34.308Z,1528912654.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:34.325Z,1528912654.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:34.687Z,1528912654.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:34.726Z,1528912654.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:35.087Z,1528912655.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:35.127Z,1528912655.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:35.487Z,1528912655.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:35.523Z,1528912655.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:35.891Z,1528912655.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:35.928Z,1528912655.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:36.287Z,1528912656.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:36.323Z,1528912656.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:36.697Z,1528912656.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:36.726Z,1528912656.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:37.109Z,1528912657.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:37.127Z,1528912657.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:37.507Z,1528912657.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:37.525Z,1528912657.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:37.891Z,1528912657.891 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:37.924Z,1528912657.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:38.287Z,1528912658.287 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:38.326Z,1528912658.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:38.687Z,1528912658.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:38.722Z,1528912658.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:39.092Z,1528912659.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:39.126Z,1528912659.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:39.505Z,1528912659.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:39.533Z,1528912659.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:39.901Z,1528912659.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:39.939Z,1528912659.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:40.301Z,1528912660.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:40.339Z,1528912660.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:40.694Z,1528912660.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:40.733Z,1528912660.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:41.094Z,1528912661.094 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:41.111Z,1528912661.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:41.505Z,1528912661.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:41.539Z,1528912661.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:41.901Z,1528912661.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:41.919Z,1528912661.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:42.301Z,1528912662.301 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:42.319Z,1528912662.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:42.694Z,1528912662.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:42.712Z,1528912662.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:43.097Z,1528912663.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:43.114Z,1528912663.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:43.502Z,1528912663.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:43.543Z,1528912663.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:43.901Z,1528912663.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:43.919Z,1528912663.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:44.306Z,1528912664.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:44.323Z,1528912664.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:44.697Z,1528912664.697 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:44.715Z,1528912664.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:45.091Z,1528912665.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:45.124Z,1528912665.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:45.502Z,1528912665.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:45.521Z,1528912665.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:45.905Z,1528912665.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:45.923Z,1528912665.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:46.302Z,1528912666.302 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:46.319Z,1528912666.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:46.688Z,1528912666.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:46.714Z,1528912666.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:47.097Z,1528912667.097 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:47.118Z,1528912667.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:47.501Z,1528912667.501 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:47.520Z,1528912667.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:47.905Z,1528912667.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:47.923Z,1528912667.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:48.299Z,1528912668.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:48.325Z,1528912668.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:48.694Z,1528912668.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:48.736Z,1528912668.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:49.092Z,1528912669.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:49.110Z,1528912669.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:49.507Z,1528912669.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:49.525Z,1528912669.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:49.911Z,1528912669.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:49.929Z,1528912669.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:50.308Z,1528912670.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:50.326Z,1528912670.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:50.694Z,1528912670.694 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:50.720Z,1528912670.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:51.091Z,1528912671.091 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:51.120Z,1528912671.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:51.509Z,1528912671.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:51.527Z,1528912671.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:51.907Z,1528912671.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:51.938Z,1528912671.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:52.304Z,1528912672.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:52.323Z,1528912672.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:52.690Z,1528912672.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:52.718Z,1528912672.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:53.092Z,1528912673.092 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:53.119Z,1528912673.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:53.507Z,1528912673.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:53.524Z,1528912673.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:53.906Z,1528912673.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:53.924Z,1528912673.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:54.307Z,1528912674.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:54.325Z,1528912674.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:54.692Z,1528912674.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:54.719Z,1528912674.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:55.083Z,1528912675.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:55.128Z,1528912675.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:55.508Z,1528912675.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:55.526Z,1528912675.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:55.908Z,1528912675.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:55.926Z,1528912675.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:56.307Z,1528912676.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:56.325Z,1528912676.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:56.687Z,1528912676.687 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:56.732Z,1528912676.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:57.089Z,1528912677.089 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:57.128Z,1528912677.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:57.504Z,1528912677.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:57.522Z,1528912677.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:57.911Z,1528912677.911 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:57.929Z,1528912677.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:58.308Z,1528912678.308 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:58.326Z,1528912678.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:58.684Z,1528912678.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:58.716Z,1528912678.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:59.088Z,1528912679.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:59.120Z,1528912679.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:59.507Z,1528912679.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:59.525Z,1528912679.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:57:59.909Z,1528912679.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:57:59.927Z,1528912679.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:00.306Z,1528912680.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:00.328Z,1528912680.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:00.690Z,1528912680.690 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:00.716Z,1528912680.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:01.086Z,1528912681.086 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:01.128Z,1528912681.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:01.511Z,1528912681.511 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:01.529Z,1528912681.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:01.908Z,1528912681.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:01.926Z,1528912681.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:02.307Z,1528912682.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:02.341Z,1528912682.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:02.692Z,1528912682.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:02.730Z,1528912682.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:03.087Z,1528912683.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:03.135Z,1528912683.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:03.503Z,1528912683.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:03.531Z,1528912683.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:03.903Z,1528912683.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:03.941Z,1528912683.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:04.312Z,1528912684.312 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:04.330Z,1528912684.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:04.684Z,1528912684.684 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:04.737Z,1528912684.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:05.087Z,1528912685.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:05.118Z,1528912685.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:05.500Z,1528912685.500 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:05.536Z,1528912685.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:05.899Z,1528912685.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:05.936Z,1528912685.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:06.298Z,1528912686.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:06.335Z,1528912686.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:06.688Z,1528912686.688 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:06.720Z,1528912686.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:07.084Z,1528912687.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:07.107Z,1528912687.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:07.502Z,1528912687.502 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:07.535Z,1528912687.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:07.904Z,1528912687.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:07.937Z,1528912687.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:08.309Z,1528912688.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:08.338Z,1528912688.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:08.693Z,1528912688.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T17:58:08.738Z,1528912688.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:09.110Z,1528912689.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:09.547Z,1528912689.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:09.937Z,1528912689.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:10.338Z,1528912690.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:10.711Z,1528912690.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:11.135Z,1528912691.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:11.538Z,1528912691.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:11.937Z,1528912691.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:12.335Z,1528912692.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:12.738Z,1528912692.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:13.108Z,1528912693.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:13.536Z,1528912693.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:13.937Z,1528912693.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:14.344Z,1528912694.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:14.715Z,1528912694.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:15.113Z,1528912695.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:15.518Z,1528912695.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:15.944Z,1528912695.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:16.345Z,1528912696.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:16.712Z,1528912696.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:17.116Z,1528912697.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:17.544Z,1528912697.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:17.922Z,1528912697.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:18.349Z,1528912698.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:18.723Z,1528912698.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:21.818Z,1528912701.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:21.956Z,1528912701.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:22.366Z,1528912702.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:22.767Z,1528912702.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:23.168Z,1528912703.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:23.564Z,1528912703.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:23.959Z,1528912703.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:24.352Z,1528912704.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:24.760Z,1528912704.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:25.161Z,1528912705.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:25.569Z,1528912705.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:25.954Z,1528912705.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:26.375Z,1528912706.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:26.755Z,1528912706.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:27.159Z,1528912707.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:27.564Z,1528912707.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:27.972Z,1528912707.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:28.363Z,1528912708.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:28.762Z,1528912708.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:29.168Z,1528912709.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:29.562Z,1528912709.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:29.969Z,1528912709.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:30.369Z,1528912710.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:30.756Z,1528912710.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:31.146Z,1528912711.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:31.573Z,1528912711.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:31.980Z,1528912711.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:32.355Z,1528912712.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:32.752Z,1528912712.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:33.152Z,1528912713.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:33.575Z,1528912713.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:33.976Z,1528912713.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:34.355Z,1528912714.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:34.751Z,1528912714.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:35.174Z,1528912715.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:35.557Z,1528912715.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:35.955Z,1528912715.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:36.353Z,1528912716.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:36.772Z,1528912716.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:37.143Z,1528912717.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:37.556Z,1528912717.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:37.958Z,1528912717.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:38.376Z,1528912718.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:38.750Z,1528912718.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:39.151Z,1528912719.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:39.557Z,1528912719.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:39.982Z,1528912719.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:40.377Z,1528912720.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:40.747Z,1528912720.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:41.151Z,1528912721.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:41.590Z,1528912721.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:41.961Z,1528912721.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:42.360Z,1528912722.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:42.759Z,1528912722.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:43.160Z,1528912723.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:43.547Z,1528912723.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:43.951Z,1528912723.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:44.349Z,1528912724.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:44.756Z,1528912724.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:45.164Z,1528912725.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:45.562Z,1528912725.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:45.953Z,1528912725.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:46.352Z,1528912726.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:46.744Z,1528912726.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:47.148Z,1528912727.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:47.555Z,1528912727.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:47.957Z,1528912727.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:48.367Z,1528912728.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:48.764Z,1528912728.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:49.153Z,1528912729.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:49.548Z,1528912729.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:49.951Z,1528912729.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:50.343Z,1528912730.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:50.761Z,1528912730.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:51.160Z,1528912731.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:51.556Z,1528912731.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:51.946Z,1528912731.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:52.354Z,1528912732.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:52.747Z,1528912732.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:53.148Z,1528912733.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:53.550Z,1528912733.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:53.963Z,1528912733.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:54.359Z,1528912734.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:54.764Z,1528912734.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:55.149Z,1528912735.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:55.546Z,1528912735.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:55.952Z,1528912735.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:56.354Z,1528912736.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:56.761Z,1528912736.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:57.167Z,1528912737.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:57.557Z,1528912737.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:57.948Z,1528912737.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:58.356Z,1528912738.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:58.736Z,1528912738.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:59.141Z,1528912739.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:59.544Z,1528912739.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:58:59.952Z,1528912739.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:00.354Z,1528912740.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:00.751Z,1528912740.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:01.143Z,1528912741.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:01.545Z,1528912741.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:01.947Z,1528912741.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:01.947Z,1528912741.947 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 290
2018-06-13T17:59:01.947Z,1528912741.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T17:59:01.949Z,1528912741.949 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:01.949Z,1528912741.949 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 290
2018-06-13T17:59:01.949Z,1528912741.949 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T17:59:01.951Z,1528912741.951 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:01.951Z,1528912741.951 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 290
2018-06-13T17:59:01.951Z,1528912741.951 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T17:59:02.029Z,1528912742.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T17:59:02.029Z,1528912742.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T17:59:02.030Z,1528912742.030 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T17:59:02.425Z,1528912742.425 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T17:59:02.425Z,1528912742.425 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 290
2018-06-13T17:59:02.426Z,1528912742.426 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T17:59:02.426Z,1528912742.426 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 290
2018-06-13T17:59:02.426Z,1528912742.426 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T17:59:02.426Z,1528912742.426 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 290
2018-06-13T17:59:02.759Z,1528912742.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T17:59:02.759Z,1528912742.759 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:59:02.760Z,1528912742.760 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:59:02.760Z,1528912742.760 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T17:59:02.760Z,1528912742.760 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:59:02.761Z,1528912742.761 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:59:02.761Z,1528912742.761 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T17:59:02.762Z,1528912742.762 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T17:59:02.762Z,1528912742.762 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T17:59:03.164Z,1528912743.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T17:59:03.165Z,1528912743.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:03.556Z,1528912743.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T17:59:03.557Z,1528912743.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:03.948Z,1528912743.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T17:59:03.949Z,1528912743.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:04.356Z,1528912744.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T17:59:04.357Z,1528912744.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:04.746Z,1528912744.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T17:59:04.747Z,1528912744.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:05.149Z,1528912745.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T17:59:05.150Z,1528912745.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:05.560Z,1528912745.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T17:59:05.565Z,1528912745.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:05.957Z,1528912745.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T17:59:05.958Z,1528912745.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:06.365Z,1528912746.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T17:59:06.366Z,1528912746.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:06.762Z,1528912746.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T17:59:06.763Z,1528912746.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:07.153Z,1528912747.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T17:59:07.154Z,1528912747.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:07.559Z,1528912747.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T17:59:07.560Z,1528912747.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:07.964Z,1528912747.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T17:59:07.965Z,1528912747.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:08.356Z,1528912748.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T17:59:08.361Z,1528912748.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:08.768Z,1528912748.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T17:59:08.769Z,1528912748.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:09.168Z,1528912749.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T17:59:09.173Z,1528912749.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:09.566Z,1528912749.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T17:59:09.566Z,1528912749.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:09.944Z,1528912749.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T17:59:09.946Z,1528912749.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:10.344Z,1528912750.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T17:59:10.345Z,1528912750.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:10.739Z,1528912750.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T17:59:10.740Z,1528912750.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:11.148Z,1528912751.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T17:59:11.150Z,1528912751.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:11.543Z,1528912751.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T17:59:11.544Z,1528912751.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:11.950Z,1528912751.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T17:59:11.951Z,1528912751.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:12.354Z,1528912752.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T17:59:12.355Z,1528912752.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:12.755Z,1528912752.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T17:59:12.756Z,1528912752.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:13.143Z,1528912753.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T17:59:13.144Z,1528912753.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:13.544Z,1528912753.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T17:59:13.546Z,1528912753.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:13.946Z,1528912753.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T17:59:13.947Z,1528912753.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:14.359Z,1528912754.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T17:59:14.360Z,1528912754.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:14.760Z,1528912754.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T17:59:14.761Z,1528912754.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:15.167Z,1528912755.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T17:59:15.168Z,1528912755.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:15.557Z,1528912755.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T17:59:15.558Z,1528912755.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:15.947Z,1528912755.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T17:59:15.948Z,1528912755.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:16.349Z,1528912756.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T17:59:16.350Z,1528912756.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:16.752Z,1528912756.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T17:59:16.757Z,1528912756.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:17.158Z,1528912757.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T17:59:17.158Z,1528912757.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:17.555Z,1528912757.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T17:59:17.556Z,1528912757.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:17.958Z,1528912757.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T17:59:17.959Z,1528912757.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:18.365Z,1528912758.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T17:59:18.366Z,1528912758.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:18.760Z,1528912758.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T17:59:18.761Z,1528912758.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:18.764Z,1528912758.764 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T17:54:18.5Z
2018-06-13T17:59:18.764Z,1528912758.764 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T17:59:18.764Z,1528912758.764 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T17:59:21.866Z,1528912761.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T17:59:21.867Z,1528912761.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:22.922Z,1528912762.922 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0336.lzma
2018-06-13T17:59:22.970Z,1528912762.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:23.132Z,1528912763.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:23.454Z,1528912763.454 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0336.lzma.bak
2018-06-13T17:59:23.454Z,1528912763.454 [DataOverHttps](INFO): SBD MOMSN=8329674
2018-06-13T17:59:23.531Z,1528912763.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:25.424Z,1528912765.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:25.598Z,1528912765.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:28.721Z,1528912768.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:28.867Z,1528912768.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:29.265Z,1528912769.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:29.669Z,1528912769.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:30.064Z,1528912770.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:30.457Z,1528912770.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:33.576Z,1528912773.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:33.701Z,1528912773.701 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0337.lzma
2018-06-13T17:59:33.775Z,1528912773.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:34.161Z,1528912774.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:34.502Z,1528912774.502 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0337.lzma.bak
2018-06-13T17:59:34.502Z,1528912774.502 [DataOverHttps](INFO): SBD MOMSN=8329676
2018-06-13T17:59:34.585Z,1528912774.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:36.480Z,1528912776.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:36.483Z,1528912776.483 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T17:59:36.483Z,1528912776.483 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T17:59:36.483Z,1528912776.483 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T17:59:36.668Z,1528912776.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:37.062Z,1528912777.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:37.462Z,1528912777.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:37.872Z,1528912777.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:38.271Z,1528912778.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:38.664Z,1528912778.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:39.065Z,1528912779.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:39.464Z,1528912779.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:39.865Z,1528912779.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:40.273Z,1528912780.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:40.676Z,1528912780.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:41.082Z,1528912781.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:41.479Z,1528912781.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:41.852Z,1528912781.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:42.248Z,1528912782.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:42.680Z,1528912782.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:43.087Z,1528912783.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:46.181Z,1528912786.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:46.332Z,1528912786.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:46.729Z,1528912786.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:47.108Z,1528912787.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:47.507Z,1528912787.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:47.935Z,1528912787.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:48.335Z,1528912788.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:48.735Z,1528912788.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:49.107Z,1528912789.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:49.512Z,1528912789.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:49.914Z,1528912789.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:50.310Z,1528912790.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:50.716Z,1528912790.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:51.119Z,1528912791.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:51.516Z,1528912791.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:51.908Z,1528912791.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:52.310Z,1528912792.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:52.718Z,1528912792.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:53.115Z,1528912793.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:53.516Z,1528912793.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:53.911Z,1528912793.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:54.308Z,1528912794.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:54.715Z,1528912794.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:55.118Z,1528912795.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:55.515Z,1528912795.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:55.912Z,1528912795.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:56.310Z,1528912796.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:56.720Z,1528912796.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:57.119Z,1528912797.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:57.514Z,1528912797.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:57.911Z,1528912797.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:58.310Z,1528912798.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:58.719Z,1528912798.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:59.119Z,1528912799.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:59.539Z,1528912799.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T17:59:59.911Z,1528912799.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:00.310Z,1528912800.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:00.716Z,1528912800.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:01.119Z,1528912801.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:01.516Z,1528912801.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:01.913Z,1528912801.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:02.308Z,1528912802.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:02.720Z,1528912802.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:03.119Z,1528912803.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:03.524Z,1528912803.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:03.911Z,1528912803.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:04.310Z,1528912804.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:04.719Z,1528912804.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:05.119Z,1528912805.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:05.521Z,1528912805.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:05.912Z,1528912805.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:06.311Z,1528912806.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:06.720Z,1528912806.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:07.124Z,1528912807.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:07.520Z,1528912807.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:07.912Z,1528912807.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:08.323Z,1528912808.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:08.719Z,1528912808.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:09.119Z,1528912809.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:09.524Z,1528912809.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:09.911Z,1528912809.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:10.316Z,1528912810.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:10.720Z,1528912810.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:11.123Z,1528912811.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:11.520Z,1528912811.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:11.912Z,1528912811.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:12.316Z,1528912812.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:12.719Z,1528912812.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:13.128Z,1528912813.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:13.524Z,1528912813.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:13.913Z,1528912813.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:14.313Z,1528912814.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:14.724Z,1528912814.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:15.124Z,1528912815.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:15.520Z,1528912815.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:15.916Z,1528912815.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:16.312Z,1528912816.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:16.763Z,1528912816.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:17.155Z,1528912817.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:17.518Z,1528912817.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:17.974Z,1528912817.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:18.405Z,1528912818.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:18.798Z,1528912818.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:19.171Z,1528912819.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:19.519Z,1528912819.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:19.918Z,1528912819.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:20.315Z,1528912820.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:20.722Z,1528912820.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:21.124Z,1528912821.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:21.529Z,1528912821.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:21.911Z,1528912821.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:22.316Z,1528912822.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:22.725Z,1528912822.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:23.128Z,1528912823.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:23.528Z,1528912823.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:23.927Z,1528912823.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:24.308Z,1528912824.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:24.721Z,1528912824.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:25.125Z,1528912825.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:25.519Z,1528912825.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:25.912Z,1528912825.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:26.316Z,1528912826.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:26.717Z,1528912826.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:27.120Z,1528912827.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:27.525Z,1528912827.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:27.917Z,1528912827.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:28.312Z,1528912828.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:28.712Z,1528912828.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:29.116Z,1528912829.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:29.511Z,1528912829.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:29.926Z,1528912829.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:30.321Z,1528912830.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:30.720Z,1528912830.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:31.115Z,1528912831.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:31.508Z,1528912831.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:31.912Z,1528912831.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:32.320Z,1528912832.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:32.710Z,1528912832.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:33.121Z,1528912833.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:33.525Z,1528912833.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:33.921Z,1528912833.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:34.313Z,1528912834.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:34.712Z,1528912834.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:35.112Z,1528912835.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:35.512Z,1528912835.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:35.925Z,1528912835.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:36.324Z,1528912836.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:36.728Z,1528912836.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:37.117Z,1528912837.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:40.223Z,1528912840.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:40.381Z,1528912840.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:40.770Z,1528912840.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:41.167Z,1528912841.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:41.563Z,1528912841.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:41.964Z,1528912841.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:42.356Z,1528912842.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:42.768Z,1528912842.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:43.171Z,1528912843.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:43.568Z,1528912843.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:43.965Z,1528912843.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:44.353Z,1528912844.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:44.767Z,1528912844.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:45.180Z,1528912845.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:45.574Z,1528912845.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:45.952Z,1528912845.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:46.347Z,1528912846.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:46.776Z,1528912846.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:47.173Z,1528912847.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:47.572Z,1528912847.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:47.950Z,1528912847.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:48.344Z,1528912848.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:48.775Z,1528912848.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:49.159Z,1528912849.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:49.556Z,1528912849.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:49.951Z,1528912849.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:50.351Z,1528912850.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:50.756Z,1528912850.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:51.159Z,1528912851.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:51.560Z,1528912851.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:51.950Z,1528912851.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:52.349Z,1528912852.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:52.752Z,1528912852.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:53.156Z,1528912853.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:53.558Z,1528912853.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:53.959Z,1528912853.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:54.347Z,1528912854.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:54.750Z,1528912854.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:55.160Z,1528912855.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:55.548Z,1528912855.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:55.955Z,1528912855.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:56.359Z,1528912856.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:56.752Z,1528912856.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:57.156Z,1528912857.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:57.556Z,1528912857.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:57.947Z,1528912857.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:58.352Z,1528912858.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:58.751Z,1528912858.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:59.155Z,1528912859.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:59.559Z,1528912859.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:00:59.959Z,1528912859.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:00.349Z,1528912860.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:00.750Z,1528912860.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:01.159Z,1528912861.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:01.550Z,1528912861.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:01.955Z,1528912861.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:02.359Z,1528912862.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:02.755Z,1528912862.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:03.150Z,1528912863.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:03.551Z,1528912863.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:03.947Z,1528912863.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:04.360Z,1528912864.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:04.764Z,1528912864.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:05.158Z,1528912865.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:05.564Z,1528912865.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:05.960Z,1528912865.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:06.351Z,1528912866.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:06.753Z,1528912866.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:07.166Z,1528912867.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:07.549Z,1528912867.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:07.960Z,1528912867.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:08.367Z,1528912868.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:08.758Z,1528912868.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:09.152Z,1528912869.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:09.566Z,1528912869.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:09.952Z,1528912869.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:10.356Z,1528912870.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:10.764Z,1528912870.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:11.158Z,1528912871.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:11.571Z,1528912871.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:11.965Z,1528912871.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:12.352Z,1528912872.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:12.752Z,1528912872.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:13.156Z,1528912873.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:13.557Z,1528912873.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:13.961Z,1528912873.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:14.364Z,1528912874.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:14.761Z,1528912874.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:15.152Z,1528912875.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:15.555Z,1528912875.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:15.953Z,1528912875.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:16.351Z,1528912876.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:16.755Z,1528912876.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:17.161Z,1528912877.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:17.564Z,1528912877.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:17.967Z,1528912877.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:18.356Z,1528912878.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:18.752Z,1528912878.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:19.157Z,1528912879.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:19.552Z,1528912879.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:19.962Z,1528912879.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:20.368Z,1528912880.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:20.764Z,1528912880.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:21.162Z,1528912881.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:21.559Z,1528912881.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:21.958Z,1528912881.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:22.358Z,1528912882.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:22.764Z,1528912882.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:23.164Z,1528912883.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:23.564Z,1528912883.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:23.972Z,1528912883.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:24.360Z,1528912884.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:24.758Z,1528912884.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:25.162Z,1528912885.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:25.548Z,1528912885.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:25.971Z,1528912885.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:26.374Z,1528912886.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:26.771Z,1528912886.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:27.147Z,1528912887.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:27.548Z,1528912887.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:27.943Z,1528912887.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:28.348Z,1528912888.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:28.748Z,1528912888.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:29.175Z,1528912889.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:29.560Z,1528912889.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:29.959Z,1528912889.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:30.351Z,1528912890.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:30.756Z,1528912890.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:31.162Z,1528912891.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:31.548Z,1528912891.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:31.968Z,1528912891.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:32.372Z,1528912892.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:32.764Z,1528912892.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:33.148Z,1528912893.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:33.555Z,1528912893.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:33.948Z,1528912893.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:34.361Z,1528912894.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:34.757Z,1528912894.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:35.157Z,1528912895.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:35.564Z,1528912895.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:35.965Z,1528912895.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:36.355Z,1528912896.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:36.752Z,1528912896.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:37.160Z,1528912897.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:40.269Z,1528912900.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:40.444Z,1528912900.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:40.828Z,1528912900.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:41.217Z,1528912901.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:41.604Z,1528912901.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:42.007Z,1528912902.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:42.406Z,1528912902.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:42.803Z,1528912902.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:43.219Z,1528912903.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:43.611Z,1528912903.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:44.014Z,1528912904.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:44.417Z,1528912904.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:44.809Z,1528912904.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:45.207Z,1528912905.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:45.607Z,1528912905.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:46.014Z,1528912906.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:46.418Z,1528912906.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:46.822Z,1528912906.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:47.223Z,1528912907.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:47.613Z,1528912907.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:48.006Z,1528912908.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:48.414Z,1528912908.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:48.797Z,1528912908.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:49.220Z,1528912909.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:49.624Z,1528912909.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:50.027Z,1528912910.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:50.401Z,1528912910.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:50.795Z,1528912910.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:51.205Z,1528912911.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:51.599Z,1528912911.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:52.007Z,1528912912.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:52.429Z,1528912912.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:52.831Z,1528912912.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:53.195Z,1528912913.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:53.599Z,1528912913.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:53.000Z,1528912914.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:54.400Z,1528912914.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:54.799Z,1528912914.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:55.212Z,1528912915.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:55.611Z,1528912915.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:56.008Z,1528912916.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:56.401Z,1528912916.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:56.799Z,1528912916.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:57.201Z,1528912917.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:57.602Z,1528912917.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:58.008Z,1528912918.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:58.410Z,1528912918.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:58.811Z,1528912918.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:59.200Z,1528912919.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:01:59.601Z,1528912919.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:00.001Z,1528912920.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:00.399Z,1528912920.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:00.805Z,1528912920.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:01.211Z,1528912921.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:01.611Z,1528912921.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:02.007Z,1528912922.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:02.402Z,1528912922.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:02.802Z,1528912922.802 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:02.802Z,1528912922.802 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 291
2018-06-13T18:02:02.802Z,1528912922.802 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:02:02.804Z,1528912922.804 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:02.804Z,1528912922.804 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 291
2018-06-13T18:02:02.804Z,1528912922.804 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:02:02.806Z,1528912922.806 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:02.806Z,1528912922.806 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 291
2018-06-13T18:02:02.806Z,1528912922.806 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:02:02.897Z,1528912922.897 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:02:02.897Z,1528912922.897 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:02:02.898Z,1528912922.898 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:02:03.285Z,1528912923.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:02:03.285Z,1528912923.285 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 291
2018-06-13T18:02:03.286Z,1528912923.286 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:02:03.286Z,1528912923.286 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 291
2018-06-13T18:02:03.286Z,1528912923.286 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:02:03.286Z,1528912923.286 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 291
2018-06-13T18:02:03.599Z,1528912923.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:02:03.599Z,1528912923.599 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:02:03.600Z,1528912923.600 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:02:03.600Z,1528912923.600 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:02:03.600Z,1528912923.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:02:03.601Z,1528912923.601 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:02:03.601Z,1528912923.601 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:02:03.601Z,1528912923.601 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:02:03.602Z,1528912923.602 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:02:04.009Z,1528912924.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:02:04.010Z,1528912924.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:04.416Z,1528912924.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:02:04.417Z,1528912924.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:04.820Z,1528912924.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:02:04.821Z,1528912924.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:05.205Z,1528912925.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:02:05.206Z,1528912925.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:05.605Z,1528912925.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:02:05.606Z,1528912925.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:06.006Z,1528912926.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:02:06.007Z,1528912926.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:06.405Z,1528912926.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:02:06.406Z,1528912926.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:06.804Z,1528912926.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:02:06.805Z,1528912926.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:07.217Z,1528912927.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:02:07.218Z,1528912927.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:07.617Z,1528912927.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:02:07.618Z,1528912927.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:08.013Z,1528912928.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:02:08.014Z,1528912928.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:08.407Z,1528912928.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:02:08.408Z,1528912928.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:08.803Z,1528912928.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:02:08.804Z,1528912928.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:09.204Z,1528912929.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:02:09.205Z,1528912929.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:09.611Z,1528912929.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:02:09.612Z,1528912929.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:10.016Z,1528912930.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:02:10.018Z,1528912930.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:10.416Z,1528912930.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:02:10.418Z,1528912930.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:10.823Z,1528912930.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:02:10.824Z,1528912930.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:11.212Z,1528912931.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:02:11.212Z,1528912931.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:11.603Z,1528912931.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:02:11.604Z,1528912931.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:12.005Z,1528912932.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:02:12.006Z,1528912932.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:12.403Z,1528912932.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:02:12.404Z,1528912932.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:12.803Z,1528912932.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T18:02:12.804Z,1528912932.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:13.213Z,1528912933.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:02:13.214Z,1528912933.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:13.616Z,1528912933.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:02:13.617Z,1528912933.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:14.012Z,1528912934.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T18:02:14.013Z,1528912934.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:14.405Z,1528912934.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:02:14.406Z,1528912934.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:14.803Z,1528912934.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:02:14.804Z,1528912934.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:15.205Z,1528912935.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:02:15.206Z,1528912935.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:15.601Z,1528912935.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:02:15.602Z,1528912935.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:16.013Z,1528912936.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:02:16.014Z,1528912936.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:16.416Z,1528912936.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:02:16.417Z,1528912936.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:16.816Z,1528912936.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:02:16.817Z,1528912936.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:17.204Z,1528912937.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:02:17.205Z,1528912937.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:17.603Z,1528912937.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T18:02:17.604Z,1528912937.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:18.006Z,1528912938.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:02:18.007Z,1528912938.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:18.404Z,1528912938.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:02:18.405Z,1528912938.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:18.803Z,1528912938.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:02:18.804Z,1528912938.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:19.217Z,1528912939.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:02:19.218Z,1528912939.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:19.620Z,1528912939.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:02:19.621Z,1528912939.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:20.012Z,1528912940.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:02:20.014Z,1528912940.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:20.405Z,1528912940.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:02:20.406Z,1528912940.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:20.804Z,1528912940.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:02:20.805Z,1528912940.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:21.204Z,1528912941.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:02:21.205Z,1528912941.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:21.611Z,1528912941.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:02:21.612Z,1528912941.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:22.014Z,1528912942.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T18:02:22.015Z,1528912942.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:22.416Z,1528912942.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T18:02:22.417Z,1528912942.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:22.824Z,1528912942.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:23.204Z,1528912943.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:23.604Z,1528912943.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:24.007Z,1528912944.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:24.408Z,1528912944.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:24.808Z,1528912944.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:25.218Z,1528912945.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:25.624Z,1528912945.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:26.016Z,1528912946.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:26.407Z,1528912946.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:26.808Z,1528912946.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:27.206Z,1528912947.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:27.612Z,1528912947.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:28.010Z,1528912948.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:28.424Z,1528912948.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:28.824Z,1528912948.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:29.208Z,1528912949.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:29.607Z,1528912949.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:30.017Z,1528912950.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:30.401Z,1528912950.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:30.803Z,1528912950.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:31.217Z,1528912951.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:31.622Z,1528912951.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:32.012Z,1528912952.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:32.407Z,1528912952.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:32.806Z,1528912952.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:33.205Z,1528912953.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:33.608Z,1528912953.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:34.010Z,1528912954.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:34.417Z,1528912954.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:34.824Z,1528912954.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:35.205Z,1528912955.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:35.603Z,1528912955.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:36.012Z,1528912956.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:36.412Z,1528912956.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:36.807Z,1528912956.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:37.228Z,1528912957.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:37.620Z,1528912957.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:38.017Z,1528912958.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:38.414Z,1528912958.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:41.520Z,1528912961.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:41.666Z,1528912961.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:42.066Z,1528912962.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:42.465Z,1528912962.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:42.859Z,1528912962.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:43.264Z,1528912963.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:43.664Z,1528912963.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:44.048Z,1528912964.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:44.446Z,1528912964.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:44.840Z,1528912964.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:45.271Z,1528912965.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:45.678Z,1528912965.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:46.055Z,1528912966.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:46.445Z,1528912966.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:46.848Z,1528912966.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:47.243Z,1528912967.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:47.644Z,1528912967.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:48.076Z,1528912968.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:48.455Z,1528912968.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:48.852Z,1528912968.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:49.252Z,1528912969.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:49.647Z,1528912969.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:50.048Z,1528912970.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:50.449Z,1528912970.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:50.856Z,1528912970.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:51.257Z,1528912971.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:51.656Z,1528912971.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:52.056Z,1528912972.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:52.448Z,1528912972.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:52.848Z,1528912972.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:53.252Z,1528912973.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:53.648Z,1528912973.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:54.061Z,1528912974.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:54.464Z,1528912974.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:54.860Z,1528912974.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:55.251Z,1528912975.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:55.644Z,1528912975.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:56.049Z,1528912976.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:56.452Z,1528912976.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:56.852Z,1528912976.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:57.257Z,1528912977.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:57.661Z,1528912977.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:58.054Z,1528912978.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:58.448Z,1528912978.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:58.849Z,1528912978.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:59.247Z,1528912979.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:02:59.652Z,1528912979.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:00.061Z,1528912980.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:00.456Z,1528912980.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:00.864Z,1528912980.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:01.248Z,1528912981.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:01.652Z,1528912981.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:02.048Z,1528912982.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:02.453Z,1528912982.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:02.844Z,1528912982.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:03.260Z,1528912983.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:03.661Z,1528912983.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:04.053Z,1528912984.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:04.448Z,1528912984.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:04.848Z,1528912984.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:05.245Z,1528912985.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:05.649Z,1528912985.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:06.061Z,1528912986.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:06.457Z,1528912986.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:06.856Z,1528912986.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:07.252Z,1528912987.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:07.647Z,1528912987.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:08.052Z,1528912988.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:08.460Z,1528912988.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:08.856Z,1528912988.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:09.261Z,1528912989.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:09.663Z,1528912989.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:10.054Z,1528912990.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:10.456Z,1528912990.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:10.862Z,1528912990.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:11.251Z,1528912991.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:11.656Z,1528912991.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:12.063Z,1528912992.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:12.458Z,1528912992.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:12.868Z,1528912992.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:13.256Z,1528912993.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:13.656Z,1528912993.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:14.054Z,1528912994.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:14.461Z,1528912994.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:14.853Z,1528912994.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:15.258Z,1528912995.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:15.660Z,1528912995.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:16.060Z,1528912996.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:16.454Z,1528912996.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:16.856Z,1528912996.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:17.255Z,1528912997.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:17.654Z,1528912997.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:18.062Z,1528912998.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:18.464Z,1528912998.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:18.861Z,1528912998.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:19.255Z,1528912999.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:19.654Z,1528912999.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:20.054Z,1528913000.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:20.460Z,1528913000.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:20.852Z,1528913000.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:21.259Z,1528913001.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:21.663Z,1528913001.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:22.064Z,1528913002.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:22.458Z,1528913002.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:22.854Z,1528913002.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:23.237Z,1528913003.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:23.661Z,1528913003.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:24.067Z,1528913004.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:24.467Z,1528913004.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:24.868Z,1528913004.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:25.262Z,1528913005.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:25.661Z,1528913005.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:26.044Z,1528913006.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:26.445Z,1528913006.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:26.852Z,1528913006.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:27.276Z,1528913007.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:27.676Z,1528913007.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:28.051Z,1528913008.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:28.450Z,1528913008.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:28.848Z,1528913008.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:29.244Z,1528913009.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:29.648Z,1528913009.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:30.056Z,1528913010.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:30.455Z,1528913010.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:30.855Z,1528913010.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:31.248Z,1528913011.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:31.652Z,1528913011.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:32.059Z,1528913012.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:32.456Z,1528913012.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:32.860Z,1528913012.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:33.250Z,1528913013.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:33.651Z,1528913013.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:34.056Z,1528913014.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:34.460Z,1528913014.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:34.860Z,1528913014.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:35.246Z,1528913015.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:35.650Z,1528913015.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:36.056Z,1528913016.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:36.478Z,1528913016.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:36.859Z,1528913016.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:37.256Z,1528913017.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:40.363Z,1528913020.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:40.539Z,1528913020.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:40.939Z,1528913020.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:41.323Z,1528913021.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:41.709Z,1528913021.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:42.110Z,1528913022.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:42.511Z,1528913022.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:42.916Z,1528913022.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:43.320Z,1528913023.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:43.720Z,1528913023.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:44.115Z,1528913024.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:44.512Z,1528913024.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:44.909Z,1528913024.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:45.311Z,1528913025.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:45.710Z,1528913025.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:46.115Z,1528913026.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:46.519Z,1528913026.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:46.919Z,1528913026.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:47.311Z,1528913027.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:47.709Z,1528913027.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:48.111Z,1528913028.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:48.510Z,1528913028.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:48.909Z,1528913028.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:49.320Z,1528913029.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:49.719Z,1528913029.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:50.115Z,1528913030.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:50.511Z,1528913030.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:50.909Z,1528913030.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:51.313Z,1528913031.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:51.712Z,1528913031.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:52.115Z,1528913032.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:52.519Z,1528913032.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:52.919Z,1528913032.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:53.308Z,1528913033.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:53.710Z,1528913033.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:54.116Z,1528913034.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:54.507Z,1528913034.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:54.913Z,1528913034.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:55.319Z,1528913035.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:55.718Z,1528913035.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:56.116Z,1528913036.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:56.512Z,1528913036.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:56.910Z,1528913036.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:57.310Z,1528913037.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:57.711Z,1528913037.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:58.117Z,1528913038.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:58.524Z,1528913038.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:58.924Z,1528913038.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:59.310Z,1528913039.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:03:59.711Z,1528913039.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:00.110Z,1528913040.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:00.511Z,1528913040.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:00.921Z,1528913040.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:01.316Z,1528913041.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:01.719Z,1528913041.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:02.119Z,1528913042.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:02.511Z,1528913042.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:02.911Z,1528913042.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:03.312Z,1528913043.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:03.715Z,1528913043.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:04.120Z,1528913044.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:04.518Z,1528913044.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:04.924Z,1528913044.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:05.313Z,1528913045.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:05.714Z,1528913045.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:06.110Z,1528913046.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:06.511Z,1528913046.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:06.914Z,1528913046.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:07.319Z,1528913047.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:07.724Z,1528913047.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:08.120Z,1528913048.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:08.516Z,1528913048.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:08.911Z,1528913048.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:09.314Z,1528913049.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:09.711Z,1528913049.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:10.119Z,1528913050.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:10.524Z,1528913050.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:10.924Z,1528913050.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:11.312Z,1528913051.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:11.714Z,1528913051.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:12.119Z,1528913052.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:12.520Z,1528913052.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:12.920Z,1528913052.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:13.316Z,1528913053.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:13.715Z,1528913053.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:14.119Z,1528913054.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:14.519Z,1528913054.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:14.920Z,1528913054.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:15.315Z,1528913055.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:15.713Z,1528913055.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:16.119Z,1528913056.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:16.524Z,1528913056.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:16.924Z,1528913056.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:17.315Z,1528913057.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:17.714Z,1528913057.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:18.128Z,1528913058.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:18.519Z,1528913058.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:18.919Z,1528913058.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:19.315Z,1528913059.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:19.714Z,1528913059.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:20.122Z,1528913060.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:20.528Z,1528913060.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:20.924Z,1528913060.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:21.316Z,1528913061.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:21.716Z,1528913061.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:22.120Z,1528913062.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:22.522Z,1528913062.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:22.922Z,1528913062.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:23.315Z,1528913063.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:23.713Z,1528913063.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:24.124Z,1528913064.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:24.521Z,1528913064.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:24.925Z,1528913064.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:25.317Z,1528913065.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:25.714Z,1528913065.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:26.122Z,1528913066.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:26.545Z,1528913066.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:26.922Z,1528913066.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:27.320Z,1528913067.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:27.718Z,1528913067.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:28.132Z,1528913068.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:28.526Z,1528913068.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:28.931Z,1528913068.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:29.332Z,1528913069.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:29.732Z,1528913069.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:30.128Z,1528913070.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:30.524Z,1528913070.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:30.926Z,1528913070.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:31.324Z,1528913071.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:31.717Z,1528913071.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:32.123Z,1528913072.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:32.536Z,1528913072.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:32.925Z,1528913072.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:33.319Z,1528913073.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:33.731Z,1528913073.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:34.140Z,1528913074.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:34.556Z,1528913074.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:34.936Z,1528913074.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:35.314Z,1528913075.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:35.728Z,1528913075.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:36.129Z,1528913076.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:36.471Z,1528913076.471 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T18:04:36.471Z,1528913076.471 [NAL9602] Data Fault, FailCount= 5
2018-06-13T18:04:36.471Z,1528913076.471 [NAL9602](ERROR): Data Fault
2018-06-13T18:04:36.540Z,1528913076.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:36.629Z,1528913076.629 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T18:04:36.629Z,1528913076.629 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T18:04:36.870Z,1528913076.870 [NAL9602](INFO): Powering down
2018-06-13T18:04:36.922Z,1528913076.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:36.925Z,1528913076.925 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T18:04:36.925Z,1528913076.925 [Default:CheckIn:C.Wait] Stopped
2018-06-13T18:04:36.925Z,1528913076.925 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T18:04:36.925Z,1528913076.925 [Default:CheckIn:D] Running Loop=1
2018-06-13T18:04:36.995Z,1528913076.995 [CBIT](INFO): Critical error at 20180613T180436
2018-06-13T18:04:37.332Z,1528913077.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:37.335Z,1528913077.335 [Default:CheckIn:D] Stopped
2018-06-13T18:04:37.335Z,1528913077.335 [Default:CheckIn:E] Running Loop=1
2018-06-13T18:04:40.431Z,1528913080.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:40.434Z,1528913080.434 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 877.398177 min 
2018-06-13T18:04:40.434Z,1528913080.434 [Default:CheckIn:E] Stopped
2018-06-13T18:04:40.434Z,1528913080.434 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T18:04:40.434Z,1528913080.434 [Default:CheckIn] Stopped
2018-06-13T18:04:40.435Z,1528913080.435 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T18:04:40.435Z,1528913080.435 [Default:CheckIn](INFO): Running loop #85
2018-06-13T18:04:40.435Z,1528913080.435 [Default:CheckIn] Running Loop=85
2018-06-13T18:04:40.435Z,1528913080.435 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T18:04:40.435Z,1528913080.435 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T18:04:40.574Z,1528913080.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:40.984Z,1528913080.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:41.385Z,1528913081.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:41.764Z,1528913081.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:42.168Z,1528913082.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:42.561Z,1528913082.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:42.963Z,1528913082.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:43.363Z,1528913083.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:43.768Z,1528913083.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:44.167Z,1528913084.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:44.563Z,1528913084.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:44.960Z,1528913084.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:45.367Z,1528913085.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:45.766Z,1528913085.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:46.161Z,1528913086.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:46.567Z,1528913086.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:46.968Z,1528913086.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:47.366Z,1528913087.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:47.786Z,1528913087.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:48.164Z,1528913088.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:48.569Z,1528913088.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:48.967Z,1528913088.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:49.372Z,1528913089.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:49.760Z,1528913089.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:50.177Z,1528913090.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:50.569Z,1528913090.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:50.963Z,1528913090.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:51.367Z,1528913091.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:51.778Z,1528913091.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:52.165Z,1528913092.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:52.569Z,1528913092.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:52.965Z,1528913092.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:53.366Z,1528913093.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:53.782Z,1528913093.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:54.170Z,1528913094.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:54.570Z,1528913094.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:54.972Z,1528913094.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:55.371Z,1528913095.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:55.768Z,1528913095.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:56.173Z,1528913096.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:56.574Z,1528913096.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:56.967Z,1528913096.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:57.370Z,1528913097.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:57.770Z,1528913097.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:58.176Z,1528913098.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:58.576Z,1528913098.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:58.970Z,1528913098.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:59.365Z,1528913099.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:04:59.773Z,1528913099.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:00.168Z,1528913100.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:00.569Z,1528913100.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:00.969Z,1528913100.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:01.372Z,1528913101.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:01.769Z,1528913101.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:02.168Z,1528913102.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:02.569Z,1528913102.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:02.980Z,1528913102.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:03.392Z,1528913103.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:03.770Z,1528913103.770 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:03.770Z,1528913103.770 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 292
2018-06-13T18:05:03.770Z,1528913103.770 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:05:03.772Z,1528913103.772 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:03.772Z,1528913103.772 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 292
2018-06-13T18:05:03.772Z,1528913103.772 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:05:03.773Z,1528913103.773 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:03.774Z,1528913103.774 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 292
2018-06-13T18:05:03.774Z,1528913103.774 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:05:03.845Z,1528913103.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:05:03.845Z,1528913103.845 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:05:03.846Z,1528913103.846 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:05:04.246Z,1528913104.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:05:04.246Z,1528913104.246 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 292
2018-06-13T18:05:04.246Z,1528913104.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:05:04.246Z,1528913104.246 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 292
2018-06-13T18:05:04.247Z,1528913104.247 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:05:04.247Z,1528913104.247 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 292
2018-06-13T18:05:04.583Z,1528913104.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:05:04.583Z,1528913104.583 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:05:04.584Z,1528913104.584 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:05:04.584Z,1528913104.584 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:05:04.584Z,1528913104.584 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:05:04.585Z,1528913104.585 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:05:04.585Z,1528913104.585 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:05:04.586Z,1528913104.586 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:05:04.586Z,1528913104.586 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:05:04.981Z,1528913104.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:05:04.982Z,1528913104.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:05.367Z,1528913105.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:05:05.368Z,1528913105.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:05.779Z,1528913105.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:05:05.780Z,1528913105.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:06.183Z,1528913106.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:05:06.184Z,1528913106.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:06.564Z,1528913106.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:05:06.581Z,1528913106.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:06.962Z,1528913106.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:05:06.963Z,1528913106.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:07.365Z,1528913107.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:05:07.366Z,1528913107.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:07.789Z,1528913107.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:05:07.790Z,1528913107.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:08.166Z,1528913108.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:05:08.167Z,1528913108.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:08.566Z,1528913108.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:05:08.567Z,1528913108.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:08.961Z,1528913108.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:05:08.962Z,1528913108.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:09.387Z,1528913109.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:05:09.388Z,1528913109.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:09.767Z,1528913109.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:05:09.768Z,1528913109.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:10.164Z,1528913110.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:05:10.166Z,1528913110.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:10.566Z,1528913110.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:05:10.567Z,1528913110.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:10.989Z,1528913110.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:05:10.990Z,1528913110.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:11.367Z,1528913111.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:05:11.368Z,1528913111.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:11.767Z,1528913111.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:05:11.767Z,1528913111.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:12.163Z,1528913112.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:05:12.164Z,1528913112.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:12.584Z,1528913112.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:05:12.585Z,1528913112.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:12.969Z,1528913112.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:05:12.970Z,1528913112.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:13.373Z,1528913113.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:05:13.374Z,1528913113.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:13.768Z,1528913113.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T18:05:13.769Z,1528913113.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:14.182Z,1528913114.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:05:14.183Z,1528913114.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:14.570Z,1528913114.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:05:14.571Z,1528913114.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:14.973Z,1528913114.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T18:05:14.974Z,1528913114.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:15.372Z,1528913115.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:05:15.373Z,1528913115.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:15.783Z,1528913115.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:05:15.784Z,1528913115.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:16.182Z,1528913116.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:05:16.183Z,1528913116.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:16.572Z,1528913116.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:05:16.573Z,1528913116.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:16.969Z,1528913116.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:05:16.970Z,1528913116.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:17.368Z,1528913117.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:05:17.368Z,1528913117.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:17.776Z,1528913117.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:05:17.777Z,1528913117.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:18.174Z,1528913118.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:05:18.175Z,1528913118.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:18.571Z,1528913118.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T18:05:18.571Z,1528913118.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:18.000Z,1528913119.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:05:19.001Z,1528913119.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:19.366Z,1528913119.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:05:19.368Z,1528913119.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:19.771Z,1528913119.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:05:19.772Z,1528913119.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:20.174Z,1528913120.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:05:20.175Z,1528913120.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:20.577Z,1528913120.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:05:20.579Z,1528913120.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:20.961Z,1528913120.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:05:20.962Z,1528913120.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:21.372Z,1528913121.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:05:21.373Z,1528913121.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:21.766Z,1528913121.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:05:21.767Z,1528913121.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:22.162Z,1528913122.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:05:22.163Z,1528913122.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:22.566Z,1528913122.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:05:22.567Z,1528913122.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:22.975Z,1528913122.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T18:05:22.976Z,1528913122.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:23.366Z,1528913123.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T18:05:23.367Z,1528913123.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:23.766Z,1528913123.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T18:05:23.767Z,1528913123.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:24.166Z,1528913124.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:24.567Z,1528913124.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:24.971Z,1528913124.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:25.372Z,1528913125.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:25.762Z,1528913125.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:26.177Z,1528913126.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:26.570Z,1528913126.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:26.964Z,1528913126.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:27.367Z,1528913127.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:27.776Z,1528913127.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:28.165Z,1528913128.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:28.567Z,1528913128.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:28.962Z,1528913128.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:29.362Z,1528913129.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:29.775Z,1528913129.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:30.168Z,1528913130.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:30.563Z,1528913130.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:30.967Z,1528913130.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:31.365Z,1528913131.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:31.768Z,1528913131.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:32.167Z,1528913132.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:32.571Z,1528913132.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:32.963Z,1528913132.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:33.376Z,1528913133.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:33.766Z,1528913133.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:34.164Z,1528913134.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:34.576Z,1528913134.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:34.969Z,1528913134.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:35.372Z,1528913135.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:35.773Z,1528913135.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:36.173Z,1528913136.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:36.564Z,1528913136.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:36.970Z,1528913136.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:37.380Z,1528913137.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:40.484Z,1528913140.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:40.632Z,1528913140.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:41.028Z,1528913141.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:41.427Z,1528913141.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:41.828Z,1528913141.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:42.227Z,1528913142.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:42.628Z,1528913142.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:43.027Z,1528913143.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:43.431Z,1528913143.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:43.830Z,1528913143.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:44.223Z,1528913144.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:44.629Z,1528913144.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:45.018Z,1528913145.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:45.430Z,1528913145.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:45.831Z,1528913145.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:46.237Z,1528913146.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:46.632Z,1528913146.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:47.032Z,1528913147.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:47.416Z,1528913147.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:47.847Z,1528913147.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:48.240Z,1528913148.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:48.620Z,1528913148.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:49.019Z,1528913149.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:49.445Z,1528913149.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:49.811Z,1528913149.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:50.221Z,1528913150.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:50.619Z,1528913150.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:51.044Z,1528913151.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:51.418Z,1528913151.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:51.821Z,1528913151.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:52.223Z,1528913152.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:52.649Z,1528913152.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:53.016Z,1528913153.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:53.419Z,1528913153.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:53.820Z,1528913153.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:54.248Z,1528913154.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:54.617Z,1528913154.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:55.025Z,1528913155.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:55.423Z,1528913155.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:55.852Z,1528913155.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:56.219Z,1528913156.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:56.623Z,1528913156.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:57.019Z,1528913157.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:57.420Z,1528913157.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:57.819Z,1528913157.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:58.214Z,1528913158.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:58.629Z,1528913158.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:59.019Z,1528913159.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:59.414Z,1528913159.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:05:59.835Z,1528913159.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:00.225Z,1528913160.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:00.618Z,1528913160.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:01.031Z,1528913161.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:01.416Z,1528913161.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:01.820Z,1528913161.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:02.221Z,1528913162.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:02.614Z,1528913162.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:03.015Z,1528913163.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:03.424Z,1528913163.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:03.819Z,1528913163.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:04.215Z,1528913164.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:04.616Z,1528913164.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:05.020Z,1528913165.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:05.416Z,1528913165.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:05.820Z,1528913165.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:06.224Z,1528913166.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:06.622Z,1528913166.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:07.020Z,1528913167.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:07.424Z,1528913167.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:07.821Z,1528913167.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:08.228Z,1528913168.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:08.624Z,1528913168.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:09.016Z,1528913169.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:09.424Z,1528913169.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:09.817Z,1528913169.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:10.216Z,1528913170.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:10.621Z,1528913170.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:11.017Z,1528913171.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:11.416Z,1528913171.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:11.824Z,1528913171.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:12.227Z,1528913172.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:12.626Z,1528913172.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:13.028Z,1528913173.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:13.420Z,1528913173.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:13.826Z,1528913173.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:14.232Z,1528913174.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:14.628Z,1528913174.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:15.016Z,1528913175.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:15.430Z,1528913175.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:15.808Z,1528913175.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:16.208Z,1528913176.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:16.634Z,1528913176.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:17.012Z,1528913177.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:17.409Z,1528913177.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:17.813Z,1528913177.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:18.219Z,1528913178.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:18.617Z,1528913178.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:19.016Z,1528913179.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:19.412Z,1528913179.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:19.815Z,1528913179.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:20.217Z,1528913180.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:20.616Z,1528913180.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:21.018Z,1528913181.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:21.419Z,1528913181.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:21.816Z,1528913181.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:22.219Z,1528913182.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:22.619Z,1528913182.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:23.014Z,1528913183.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:23.418Z,1528913183.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:23.819Z,1528913183.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:24.215Z,1528913184.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:24.618Z,1528913184.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:25.019Z,1528913185.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:25.413Z,1528913185.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:25.818Z,1528913185.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:26.214Z,1528913186.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:26.620Z,1528913186.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:27.028Z,1528913187.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:27.420Z,1528913187.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:27.818Z,1528913187.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:28.219Z,1528913188.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:28.619Z,1528913188.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:29.018Z,1528913189.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:29.419Z,1528913189.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:29.820Z,1528913189.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:30.219Z,1528913190.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:30.624Z,1528913190.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:31.019Z,1528913191.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:31.424Z,1528913191.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:31.822Z,1528913191.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:32.219Z,1528913192.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:32.617Z,1528913192.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:33.017Z,1528913193.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:33.419Z,1528913193.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:33.818Z,1528913193.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:34.219Z,1528913194.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:34.620Z,1528913194.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:35.017Z,1528913195.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:35.418Z,1528913195.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:35.820Z,1528913195.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:36.219Z,1528913196.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:36.639Z,1528913196.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:36.729Z,1528913196.729 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T18:06:36.729Z,1528913196.729 [NAL9602] No Fault, FailCount= 5
2018-06-13T18:06:36.978Z,1528913196.978 [NAL9602](INFO): Powering up NAL9602
2018-06-13T18:06:37.025Z,1528913197.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:37.420Z,1528913197.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:40.534Z,1528913200.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:40.688Z,1528913200.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:41.076Z,1528913201.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:41.476Z,1528913201.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:41.872Z,1528913201.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:42.267Z,1528913202.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:42.670Z,1528913202.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:43.076Z,1528913203.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:43.467Z,1528913203.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:43.876Z,1528913203.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:44.278Z,1528913204.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:44.676Z,1528913204.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:45.065Z,1528913205.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:45.478Z,1528913205.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:45.882Z,1528913205.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:46.273Z,1528913206.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:46.693Z,1528913206.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:47.056Z,1528913207.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:47.483Z,1528913207.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:47.830Z,1528913207.830 [NAL9602](INFO): NAL9602 initialized
2018-06-13T18:06:47.864Z,1528913207.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:48.264Z,1528913208.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:48.670Z,1528913208.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:49.075Z,1528913209.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:49.467Z,1528913209.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:49.864Z,1528913209.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:50.268Z,1528913210.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:50.676Z,1528913210.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:51.072Z,1528913211.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:51.472Z,1528913211.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:51.871Z,1528913211.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:52.268Z,1528913212.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:52.676Z,1528913212.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:53.080Z,1528913213.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:53.478Z,1528913213.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:53.868Z,1528913213.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:54.272Z,1528913214.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:54.677Z,1528913214.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:55.080Z,1528913215.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:55.477Z,1528913215.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:55.870Z,1528913215.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:56.276Z,1528913216.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:56.677Z,1528913216.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:57.077Z,1528913217.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:57.476Z,1528913217.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:57.877Z,1528913217.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:58.264Z,1528913218.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:58.684Z,1528913218.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:59.079Z,1528913219.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:59.483Z,1528913219.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:06:59.874Z,1528913219.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:00.261Z,1528913220.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:00.687Z,1528913220.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:01.087Z,1528913221.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:01.495Z,1528913221.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:01.864Z,1528913221.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:02.288Z,1528913222.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:02.691Z,1528913222.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:03.072Z,1528913223.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:03.471Z,1528913223.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:03.867Z,1528913223.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:04.263Z,1528913224.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:04.671Z,1528913224.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:05.071Z,1528913225.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:05.470Z,1528913225.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:05.878Z,1528913225.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:06.281Z,1528913226.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:06.677Z,1528913226.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:07.080Z,1528913227.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:07.477Z,1528913227.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:07.869Z,1528913227.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:08.266Z,1528913228.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:08.684Z,1528913228.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:09.080Z,1528913229.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:09.484Z,1528913229.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:09.872Z,1528913229.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:10.276Z,1528913230.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:10.669Z,1528913230.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:11.077Z,1528913231.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:11.477Z,1528913231.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:11.876Z,1528913231.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:12.279Z,1528913232.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:12.666Z,1528913232.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:13.064Z,1528913233.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:13.479Z,1528913233.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:13.877Z,1528913233.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:14.287Z,1528913234.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:14.678Z,1528913234.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:15.065Z,1528913235.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:15.476Z,1528913235.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:15.879Z,1528913235.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:16.265Z,1528913236.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:16.668Z,1528913236.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:17.077Z,1528913237.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:17.479Z,1528913237.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:17.876Z,1528913237.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:18.280Z,1528913238.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:18.671Z,1528913238.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:19.069Z,1528913239.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:19.471Z,1528913239.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:19.881Z,1528913239.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:20.282Z,1528913240.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:20.678Z,1528913240.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:21.072Z,1528913241.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:21.474Z,1528913241.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:21.876Z,1528913241.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:22.271Z,1528913242.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:22.681Z,1528913242.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:23.088Z,1528913243.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:23.488Z,1528913243.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:23.884Z,1528913243.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:24.266Z,1528913244.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:24.664Z,1528913244.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:25.066Z,1528913245.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:25.465Z,1528913245.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:25.888Z,1528913245.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:26.275Z,1528913246.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:26.675Z,1528913246.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:27.067Z,1528913247.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:27.465Z,1528913247.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:27.866Z,1528913247.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:28.264Z,1528913248.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:28.665Z,1528913248.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:29.076Z,1528913249.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:29.474Z,1528913249.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:29.875Z,1528913249.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:30.266Z,1528913250.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:30.664Z,1528913250.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:31.068Z,1528913251.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:31.466Z,1528913251.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:31.887Z,1528913251.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:32.280Z,1528913252.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:32.676Z,1528913252.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:33.063Z,1528913253.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:33.472Z,1528913253.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:33.868Z,1528913253.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:34.264Z,1528913254.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:34.667Z,1528913254.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:35.076Z,1528913255.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:35.476Z,1528913255.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:35.877Z,1528913255.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:36.267Z,1528913256.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:36.665Z,1528913256.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:37.076Z,1528913257.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:37.474Z,1528913257.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:40.607Z,1528913260.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:40.788Z,1528913260.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:41.161Z,1528913261.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:41.557Z,1528913261.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:41.958Z,1528913261.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:42.344Z,1528913262.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:42.767Z,1528913262.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:43.170Z,1528913263.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:43.571Z,1528913263.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:43.944Z,1528913263.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:44.344Z,1528913264.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:44.775Z,1528913264.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:45.155Z,1528913265.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:45.551Z,1528913265.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:45.959Z,1528913265.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:46.346Z,1528913266.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:46.752Z,1528913266.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:47.156Z,1528913267.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:47.555Z,1528913267.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:47.947Z,1528913267.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:48.352Z,1528913268.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:48.756Z,1528913268.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:49.155Z,1528913269.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:49.557Z,1528913269.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:49.947Z,1528913269.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:50.347Z,1528913270.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:50.756Z,1528913270.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:51.154Z,1528913271.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:51.555Z,1528913271.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:51.958Z,1528913271.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:52.347Z,1528913272.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:52.755Z,1528913272.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:53.155Z,1528913273.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:53.555Z,1528913273.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:53.955Z,1528913273.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:54.361Z,1528913274.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:54.756Z,1528913274.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:55.156Z,1528913275.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:55.556Z,1528913275.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:55.948Z,1528913275.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:56.349Z,1528913276.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:56.757Z,1528913276.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:57.157Z,1528913277.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:57.560Z,1528913277.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:57.951Z,1528913277.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:58.348Z,1528913278.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:58.756Z,1528913278.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:59.160Z,1528913279.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:59.560Z,1528913279.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:07:59.949Z,1528913279.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:00.348Z,1528913280.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:00.757Z,1528913280.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:01.164Z,1528913281.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:01.556Z,1528913281.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:01.947Z,1528913281.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:02.349Z,1528913282.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:02.750Z,1528913282.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:03.161Z,1528913283.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:03.559Z,1528913283.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:03.957Z,1528913283.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:04.347Z,1528913284.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:04.746Z,1528913284.746 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:04.746Z,1528913284.746 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 293
2018-06-13T18:08:04.746Z,1528913284.746 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:08:04.748Z,1528913284.748 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:04.748Z,1528913284.748 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 293
2018-06-13T18:08:04.748Z,1528913284.748 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:08:04.750Z,1528913284.750 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:04.750Z,1528913284.750 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 293
2018-06-13T18:08:04.750Z,1528913284.750 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:08:04.825Z,1528913284.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:08:04.825Z,1528913284.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:08:04.826Z,1528913284.826 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:08:05.233Z,1528913285.233 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:08:05.233Z,1528913285.233 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 293
2018-06-13T18:08:05.233Z,1528913285.233 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:08:05.234Z,1528913285.234 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 293
2018-06-13T18:08:05.234Z,1528913285.234 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:08:05.234Z,1528913285.234 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 293
2018-06-13T18:08:05.548Z,1528913285.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:08:05.548Z,1528913285.548 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:08:05.548Z,1528913285.548 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:08:05.549Z,1528913285.549 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:08:05.549Z,1528913285.549 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:08:05.550Z,1528913285.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:08:05.550Z,1528913285.550 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:08:05.550Z,1528913285.550 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:08:05.551Z,1528913285.551 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:08:05.964Z,1528913285.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:08:05.965Z,1528913285.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:06.361Z,1528913286.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:08:06.362Z,1528913286.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:06.759Z,1528913286.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:08:06.760Z,1528913286.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:07.158Z,1528913287.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:08:07.159Z,1528913287.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:07.556Z,1528913287.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:08:07.557Z,1528913287.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:07.940Z,1528913287.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:08:07.958Z,1528913287.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:08.361Z,1528913288.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:08:08.362Z,1528913288.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:08.741Z,1528913288.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:08:08.742Z,1528913288.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:09.166Z,1528913289.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:08:09.167Z,1528913289.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:09.574Z,1528913289.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:08:09.575Z,1528913289.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:09.956Z,1528913289.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:08:09.973Z,1528913289.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:10.346Z,1528913290.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:08:10.347Z,1528913290.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:10.746Z,1528913290.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:08:10.747Z,1528913290.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:11.146Z,1528913291.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:08:11.147Z,1528913291.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:11.543Z,1528913291.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:08:11.544Z,1528913291.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:11.952Z,1528913291.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:08:11.953Z,1528913291.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:12.355Z,1528913292.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:08:12.356Z,1528913292.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:12.751Z,1528913292.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:08:12.752Z,1528913292.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:13.146Z,1528913293.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:08:13.147Z,1528913293.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:13.544Z,1528913293.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:08:13.545Z,1528913293.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:13.946Z,1528913293.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:08:13.947Z,1528913293.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:14.345Z,1528913294.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:08:14.346Z,1528913294.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:14.745Z,1528913294.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T18:08:14.746Z,1528913294.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:15.149Z,1528913295.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:08:15.150Z,1528913295.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:15.554Z,1528913295.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:08:15.555Z,1528913295.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:15.955Z,1528913295.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T18:08:15.956Z,1528913295.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:16.343Z,1528913296.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:08:16.344Z,1528913296.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:16.745Z,1528913296.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:08:16.746Z,1528913296.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:17.145Z,1528913297.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:08:17.146Z,1528913297.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:17.547Z,1528913297.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:08:17.548Z,1528913297.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:17.956Z,1528913297.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:08:17.957Z,1528913297.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:18.359Z,1528913298.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:08:18.360Z,1528913298.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:18.751Z,1528913298.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:08:18.752Z,1528913298.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:19.147Z,1528913299.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:08:19.148Z,1528913299.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:19.546Z,1528913299.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T18:08:19.547Z,1528913299.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:19.947Z,1528913299.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:08:19.948Z,1528913299.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:20.347Z,1528913300.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:08:20.348Z,1528913300.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:20.751Z,1528913300.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:08:20.752Z,1528913300.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:21.152Z,1528913301.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:08:21.153Z,1528913301.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:21.555Z,1528913301.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:08:21.556Z,1528913301.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:21.959Z,1528913301.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:08:21.960Z,1528913301.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:22.343Z,1528913302.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:08:22.344Z,1528913302.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:22.747Z,1528913302.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:08:22.748Z,1528913302.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:23.150Z,1528913303.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:08:23.151Z,1528913303.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:23.547Z,1528913303.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:08:23.548Z,1528913303.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:23.956Z,1528913303.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T18:08:23.957Z,1528913303.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:24.359Z,1528913304.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T18:08:24.360Z,1528913304.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:24.755Z,1528913304.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:25.152Z,1528913305.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:25.546Z,1528913305.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:25.952Z,1528913305.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:26.349Z,1528913306.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:26.748Z,1528913306.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:27.157Z,1528913307.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:27.558Z,1528913307.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:27.960Z,1528913307.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:28.347Z,1528913308.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:28.747Z,1528913308.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:29.147Z,1528913309.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:29.547Z,1528913309.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:29.960Z,1528913309.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:30.360Z,1528913310.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:30.756Z,1528913310.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:31.156Z,1528913311.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:31.556Z,1528913311.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:31.948Z,1528913311.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:32.348Z,1528913312.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:32.758Z,1528913312.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:33.157Z,1528913313.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:33.555Z,1528913313.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:33.955Z,1528913313.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:34.348Z,1528913314.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:34.748Z,1528913314.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:35.147Z,1528913315.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:35.552Z,1528913315.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:35.960Z,1528913315.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:36.360Z,1528913316.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:36.759Z,1528913316.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:37.146Z,1528913317.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:37.547Z,1528913317.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:37.949Z,1528913317.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:38.351Z,1528913318.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:38.751Z,1528913318.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:39.159Z,1528913319.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:39.558Z,1528913319.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:39.960Z,1528913319.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:40.352Z,1528913320.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:40.756Z,1528913320.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:41.152Z,1528913321.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:44.258Z,1528913324.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:44.434Z,1528913324.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:44.837Z,1528913324.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:45.237Z,1528913325.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:45.607Z,1528913325.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:46.008Z,1528913326.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:46.412Z,1528913326.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:46.808Z,1528913326.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:47.235Z,1528913327.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:47.639Z,1528913327.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:48.015Z,1528913328.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:48.416Z,1528913328.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:48.816Z,1528913328.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:49.210Z,1528913329.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:49.611Z,1528913329.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:50.019Z,1528913330.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:50.419Z,1528913330.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:50.820Z,1528913330.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:51.212Z,1528913331.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:51.619Z,1528913331.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:52.013Z,1528913332.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:52.430Z,1528913332.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:52.829Z,1528913332.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:53.224Z,1528913333.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:53.628Z,1528913333.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:54.024Z,1528913334.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:54.418Z,1528913334.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:54.811Z,1528913334.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:55.218Z,1528913335.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:55.630Z,1528913335.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:56.022Z,1528913336.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:56.428Z,1528913336.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:56.820Z,1528913336.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:57.208Z,1528913337.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:57.611Z,1528913337.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:58.021Z,1528913338.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:58.413Z,1528913338.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:58.820Z,1528913338.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:59.227Z,1528913339.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:08:59.626Z,1528913339.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:00.020Z,1528913340.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:00.414Z,1528913340.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:00.812Z,1528913340.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:01.224Z,1528913341.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:01.623Z,1528913341.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:02.084Z,1528913342.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:02.424Z,1528913342.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:02.824Z,1528913342.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:03.217Z,1528913343.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:03.620Z,1528913343.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:04.021Z,1528913344.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:04.405Z,1528913344.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:04.804Z,1528913344.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:05.237Z,1528913345.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:05.628Z,1528913345.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:06.032Z,1528913346.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:06.431Z,1528913346.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:06.801Z,1528913346.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:07.206Z,1528913347.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:07.608Z,1528913347.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:08.033Z,1528913348.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:08.431Z,1528913348.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:08.836Z,1528913348.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:09.236Z,1528913349.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:09.605Z,1528913349.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:10.012Z,1528913350.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:10.408Z,1528913350.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:10.809Z,1528913350.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:11.236Z,1528913351.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:11.635Z,1528913351.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:12.040Z,1528913352.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:12.408Z,1528913352.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:12.808Z,1528913352.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:13.210Z,1528913353.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:13.616Z,1528913353.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:14.015Z,1528913354.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:14.424Z,1528913354.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:14.815Z,1528913354.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:15.207Z,1528913355.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:15.611Z,1528913355.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:16.010Z,1528913356.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:16.408Z,1528913356.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:16.809Z,1528913356.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:17.212Z,1528913357.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:17.615Z,1528913357.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:18.015Z,1528913358.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:18.410Z,1528913358.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:18.807Z,1528913358.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:19.210Z,1528913359.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:19.610Z,1528913359.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:20.017Z,1528913360.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:20.424Z,1528913360.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:20.820Z,1528913360.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:21.207Z,1528913361.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:21.610Z,1528913361.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:22.010Z,1528913362.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:22.409Z,1528913362.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:22.811Z,1528913362.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:23.216Z,1528913363.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:23.616Z,1528913363.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:24.015Z,1528913364.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:24.425Z,1528913364.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:24.807Z,1528913364.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:25.218Z,1528913365.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:25.614Z,1528913365.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:26.020Z,1528913366.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:26.421Z,1528913366.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:26.824Z,1528913366.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:27.208Z,1528913367.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:27.610Z,1528913367.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:28.021Z,1528913368.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:28.413Z,1528913368.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:28.811Z,1528913368.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:29.223Z,1528913369.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:29.622Z,1528913369.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:30.024Z,1528913370.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:30.421Z,1528913370.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:30.824Z,1528913370.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:31.220Z,1528913371.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:31.658Z,1528913371.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:32.022Z,1528913372.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:32.425Z,1528913372.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:32.822Z,1528913372.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:33.226Z,1528913373.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:33.614Z,1528913373.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:34.016Z,1528913374.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:34.414Z,1528913374.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:34.812Z,1528913374.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:35.228Z,1528913375.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:35.628Z,1528913375.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:36.025Z,1528913376.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:36.420Z,1528913376.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:36.824Z,1528913376.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:37.217Z,1528913377.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:37.624Z,1528913377.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:40.740Z,1528913380.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:40.759Z,1528913380.759 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T18:04:40.4Z
2018-06-13T18:09:40.760Z,1528913380.760 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T18:09:40.760Z,1528913380.760 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T18:09:40.932Z,1528913380.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:42.084Z,1528913382.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:42.241Z,1528913382.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:42.636Z,1528913382.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:43.043Z,1528913383.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:43.464Z,1528913383.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:43.837Z,1528913383.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:44.272Z,1528913384.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:44.667Z,1528913384.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:45.047Z,1528913385.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:45.441Z,1528913385.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:45.838Z,1528913385.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:46.239Z,1528913386.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:46.645Z,1528913386.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:49.777Z,1528913389.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:49.869Z,1528913389.869 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0340.lzma
2018-06-13T18:09:49.935Z,1528913389.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:50.330Z,1528913390.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:50.666Z,1528913390.666 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0340.lzma.bak
2018-06-13T18:09:50.666Z,1528913390.666 [DataOverHttps](INFO): SBD MOMSN=8329687
2018-06-13T18:09:50.729Z,1528913390.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:52.626Z,1528913392.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:52.783Z,1528913392.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:55.925Z,1528913395.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:56.100Z,1528913396.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:56.488Z,1528913396.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:56.883Z,1528913396.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:57.278Z,1528913397.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:57.672Z,1528913397.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:58.087Z,1528913398.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:58.481Z,1528913398.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:09:58.880Z,1528913398.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:02.024Z,1528913402.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:02.118Z,1528913402.118 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0341.lzma
2018-06-13T18:10:02.186Z,1528913402.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:02.584Z,1528913402.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:02.918Z,1528913402.918 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0341.lzma.bak
2018-06-13T18:10:02.918Z,1528913402.918 [DataOverHttps](INFO): SBD MOMSN=8329690
2018-06-13T18:10:03.017Z,1528913403.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:04.888Z,1528913404.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:04.891Z,1528913404.891 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T18:10:04.891Z,1528913404.891 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T18:10:04.891Z,1528913404.891 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T18:10:05.035Z,1528913405.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:05.432Z,1528913405.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:05.844Z,1528913405.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:06.233Z,1528913406.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:09.377Z,1528913409.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:09.521Z,1528913409.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:09.936Z,1528913409.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:10.331Z,1528913410.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:10.720Z,1528913410.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:11.124Z,1528913411.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:11.576Z,1528913411.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:11.904Z,1528913411.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:12.331Z,1528913412.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:12.729Z,1528913412.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:13.130Z,1528913413.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:13.508Z,1528913413.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:13.925Z,1528913413.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:14.305Z,1528913414.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:14.712Z,1528913414.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:15.135Z,1528913415.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:15.531Z,1528913415.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:15.932Z,1528913415.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:16.312Z,1528913416.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:16.780Z,1528913416.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:17.111Z,1528913417.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:17.618Z,1528913417.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:18.015Z,1528913418.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:18.360Z,1528913418.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:18.739Z,1528913418.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:19.124Z,1528913419.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:19.526Z,1528913419.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:19.923Z,1528913419.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:20.306Z,1528913420.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:20.721Z,1528913420.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:21.140Z,1528913421.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:21.539Z,1528913421.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:21.940Z,1528913421.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:22.308Z,1528913422.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:22.708Z,1528913422.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:23.117Z,1528913423.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:23.520Z,1528913423.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:23.919Z,1528913423.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:24.321Z,1528913424.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:24.730Z,1528913424.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:25.118Z,1528913425.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:25.520Z,1528913425.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:25.917Z,1528913425.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:26.321Z,1528913426.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:26.730Z,1528913426.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:27.129Z,1528913427.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:27.526Z,1528913427.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:27.930Z,1528913427.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:28.325Z,1528913428.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:28.709Z,1528913428.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:29.107Z,1528913429.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:29.508Z,1528913429.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:29.907Z,1528913429.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:30.332Z,1528913430.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:30.737Z,1528913430.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:31.132Z,1528913431.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:31.511Z,1528913431.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:31.908Z,1528913431.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:32.312Z,1528913432.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:32.707Z,1528913432.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:33.129Z,1528913433.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:33.533Z,1528913433.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:33.932Z,1528913433.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:34.312Z,1528913434.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:34.716Z,1528913434.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:35.111Z,1528913435.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:35.509Z,1528913435.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:35.907Z,1528913435.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:36.333Z,1528913436.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:36.739Z,1528913436.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:37.139Z,1528913437.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:37.512Z,1528913437.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:37.915Z,1528913437.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:38.309Z,1528913438.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:38.712Z,1528913438.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:39.139Z,1528913439.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:39.538Z,1528913439.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:39.947Z,1528913439.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:40.320Z,1528913440.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:40.714Z,1528913440.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:41.116Z,1528913441.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:41.515Z,1528913441.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:41.911Z,1528913441.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:42.324Z,1528913442.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:42.721Z,1528913442.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:43.116Z,1528913443.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:43.511Z,1528913443.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:43.912Z,1528913443.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:44.322Z,1528913444.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:44.714Z,1528913444.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:45.126Z,1528913445.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:45.528Z,1528913445.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:45.924Z,1528913445.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:46.314Z,1528913446.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:46.716Z,1528913446.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:47.115Z,1528913447.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:47.516Z,1528913447.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:47.910Z,1528913447.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:48.325Z,1528913448.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:48.724Z,1528913448.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:49.122Z,1528913449.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:49.527Z,1528913449.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:49.915Z,1528913449.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:50.316Z,1528913450.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:50.716Z,1528913450.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:51.126Z,1528913451.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:51.520Z,1528913451.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:51.924Z,1528913451.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:52.316Z,1528913452.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:52.718Z,1528913452.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:53.115Z,1528913453.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:53.520Z,1528913453.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:53.914Z,1528913453.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:54.327Z,1528913454.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:54.724Z,1528913454.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:55.128Z,1528913455.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:55.516Z,1528913455.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:55.916Z,1528913455.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:56.313Z,1528913456.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:56.720Z,1528913456.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:57.125Z,1528913457.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:57.532Z,1528913457.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:57.928Z,1528913457.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:58.315Z,1528913458.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:58.728Z,1528913458.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:59.135Z,1528913459.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:59.516Z,1528913459.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:10:59.912Z,1528913459.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:00.324Z,1528913460.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:00.727Z,1528913460.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:01.125Z,1528913461.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:01.514Z,1528913461.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:01.922Z,1528913461.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:02.315Z,1528913462.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:02.728Z,1528913462.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:03.125Z,1528913463.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:03.529Z,1528913463.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:03.924Z,1528913463.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:04.319Z,1528913464.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:04.732Z,1528913464.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:05.132Z,1528913465.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:05.522Z,1528913465.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:08.623Z,1528913468.623 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:08.623Z,1528913468.623 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 294
2018-06-13T18:11:08.623Z,1528913468.623 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:11:08.624Z,1528913468.624 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:08.625Z,1528913468.625 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 294
2018-06-13T18:11:08.625Z,1528913468.625 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:11:08.626Z,1528913468.626 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:08.627Z,1528913468.627 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 294
2018-06-13T18:11:08.627Z,1528913468.627 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:11:08.706Z,1528913468.706 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:11:08.706Z,1528913468.706 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:11:08.707Z,1528913468.707 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:11:08.877Z,1528913468.877 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:11:08.877Z,1528913468.877 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 294
2018-06-13T18:11:08.878Z,1528913468.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:11:08.878Z,1528913468.878 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 294
2018-06-13T18:11:08.878Z,1528913468.878 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:11:08.878Z,1528913468.878 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 294
2018-06-13T18:11:09.178Z,1528913469.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:11:09.179Z,1528913469.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:11:09.179Z,1528913469.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:11:09.180Z,1528913469.180 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:11:09.180Z,1528913469.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:11:09.180Z,1528913469.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:11:09.181Z,1528913469.181 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:11:09.181Z,1528913469.181 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:11:09.181Z,1528913469.181 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:11:09.583Z,1528913469.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T18:11:09.583Z,1528913469.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:09.973Z,1528913469.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T18:11:09.974Z,1528913469.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:10.375Z,1528913470.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T18:11:10.376Z,1528913470.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:10.773Z,1528913470.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T18:11:10.774Z,1528913470.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:11.174Z,1528913471.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T18:11:11.175Z,1528913471.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:11.583Z,1528913471.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T18:11:11.584Z,1528913471.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:11.976Z,1528913471.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T18:11:11.977Z,1528913471.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:12.372Z,1528913472.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T18:11:12.373Z,1528913472.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:12.756Z,1528913472.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T18:11:12.781Z,1528913472.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:13.175Z,1528913473.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T18:11:13.176Z,1528913473.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:13.577Z,1528913473.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T18:11:13.578Z,1528913473.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:13.955Z,1528913473.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T18:11:13.956Z,1528913473.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:14.386Z,1528913474.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T18:11:14.386Z,1528913474.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:14.782Z,1528913474.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T18:11:14.783Z,1528913474.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:15.183Z,1528913475.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T18:11:15.184Z,1528913475.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:15.560Z,1528913475.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T18:11:15.561Z,1528913475.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:15.959Z,1528913475.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T18:11:15.960Z,1528913475.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:16.363Z,1528913476.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T18:11:16.364Z,1528913476.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:16.762Z,1528913476.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T18:11:16.763Z,1528913476.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:17.186Z,1528913477.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T18:11:17.187Z,1528913477.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:17.592Z,1528913477.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T18:11:17.592Z,1528913477.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:17.987Z,1528913477.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T18:11:17.988Z,1528913477.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:18.362Z,1528913478.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T18:11:18.363Z,1528913478.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:18.766Z,1528913478.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T18:11:18.767Z,1528913478.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:19.160Z,1528913479.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T18:11:19.161Z,1528913479.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:19.563Z,1528913479.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T18:11:19.563Z,1528913479.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:19.964Z,1528913479.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T18:11:19.965Z,1528913479.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:20.392Z,1528913480.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-06-13T18:11:20.394Z,1528913480.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:20.788Z,1528913480.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T18:11:20.788Z,1528913480.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:21.189Z,1528913481.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T18:11:21.190Z,1528913481.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:21.562Z,1528913481.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T18:11:21.563Z,1528913481.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:21.968Z,1528913481.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T18:11:21.985Z,1528913481.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:22.364Z,1528913482.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T18:11:22.365Z,1528913482.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:22.763Z,1528913482.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T18:11:22.764Z,1528913482.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:23.197Z,1528913483.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T18:11:23.198Z,1528913483.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:23.597Z,1528913483.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T18:11:23.598Z,1528913483.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:23.994Z,1528913483.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T18:11:23.995Z,1528913483.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:24.365Z,1528913484.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T18:11:24.366Z,1528913484.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:24.770Z,1528913484.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T18:11:24.771Z,1528913484.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:25.166Z,1528913485.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T18:11:25.167Z,1528913485.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:25.566Z,1528913485.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T18:11:25.567Z,1528913485.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:25.971Z,1528913485.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T18:11:25.971Z,1528913485.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:26.376Z,1528913486.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T18:11:26.377Z,1528913486.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:26.770Z,1528913486.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T18:11:26.771Z,1528913486.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:27.179Z,1528913487.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T18:11:27.180Z,1528913487.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:27.567Z,1528913487.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T18:11:27.568Z,1528913487.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:27.968Z,1528913487.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T18:11:27.970Z,1528913487.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:28.372Z,1528913488.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T18:11:28.373Z,1528913488.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:28.767Z,1528913488.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:29.172Z,1528913489.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:29.575Z,1528913489.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:29.984Z,1528913489.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:30.364Z,1528913490.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:30.774Z,1528913490.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:31.169Z,1528913491.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:31.568Z,1528913491.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:31.979Z,1528913491.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:32.380Z,1528913492.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:32.780Z,1528913492.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:33.177Z,1528913493.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:33.566Z,1528913493.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:33.980Z,1528913493.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:34.369Z,1528913494.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:34.767Z,1528913494.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:35.174Z,1528913495.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:35.578Z,1528913495.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:35.979Z,1528913495.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:36.368Z,1528913496.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:36.771Z,1528913496.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:37.176Z,1528913497.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:37.569Z,1528913497.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:37.972Z,1528913497.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:38.376Z,1528913498.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:38.794Z,1528913498.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:39.199Z,1528913499.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:39.568Z,1528913499.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:39.975Z,1528913499.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:40.394Z,1528913500.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:40.768Z,1528913500.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:41.175Z,1528913501.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:41.577Z,1528913501.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:41.993Z,1528913501.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:42.369Z,1528913502.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:42.768Z,1528913502.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:43.177Z,1528913503.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:43.584Z,1528913503.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:43.967Z,1528913503.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:44.384Z,1528913504.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:44.778Z,1528913504.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:45.204Z,1528913505.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:45.567Z,1528913505.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:45.967Z,1528913505.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:46.375Z,1528913506.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:46.764Z,1528913506.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:47.179Z,1528913507.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:47.582Z,1528913507.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:47.981Z,1528913507.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:48.389Z,1528913508.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:48.782Z,1528913508.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:49.170Z,1528913509.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:49.581Z,1528913509.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:49.977Z,1528913509.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:50.382Z,1528913510.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:50.782Z,1528913510.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:51.195Z,1528913511.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:51.576Z,1528913511.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:51.978Z,1528913511.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:52.384Z,1528913512.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:52.752Z,1528913512.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:53.182Z,1528913513.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:53.586Z,1528913513.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:53.988Z,1528913513.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:54.386Z,1528913514.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:54.764Z,1528913514.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:55.163Z,1528913515.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:55.589Z,1528913515.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:55.993Z,1528913515.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:56.363Z,1528913516.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:56.763Z,1528913516.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:57.174Z,1528913517.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:57.575Z,1528913517.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:57.972Z,1528913517.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:58.368Z,1528913518.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:58.776Z,1528913518.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:59.176Z,1528913519.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:59.571Z,1528913519.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:11:59.968Z,1528913519.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:00.364Z,1528913520.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:00.770Z,1528913520.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:01.169Z,1528913521.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:01.576Z,1528913521.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:01.972Z,1528913521.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:02.362Z,1528913522.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:02.764Z,1528913522.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:03.173Z,1528913523.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:03.575Z,1528913523.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:03.976Z,1528913523.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:04.368Z,1528913524.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:04.771Z,1528913524.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:05.176Z,1528913525.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:05.603Z,1528913525.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:08.727Z,1528913528.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:08.879Z,1528913528.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:09.275Z,1528913529.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:09.671Z,1528913529.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:10.071Z,1528913530.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:10.479Z,1528913530.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:10.880Z,1528913530.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:11.276Z,1528913531.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:11.672Z,1528913531.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:12.068Z,1528913532.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:12.474Z,1528913532.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:12.884Z,1528913532.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:13.277Z,1528913533.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:13.679Z,1528913533.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:14.088Z,1528913534.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:14.472Z,1528913534.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:14.870Z,1528913534.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:15.272Z,1528913535.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:15.674Z,1528913535.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:16.071Z,1528913536.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:16.488Z,1528913536.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:16.881Z,1528913536.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:17.284Z,1528913537.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:17.673Z,1528913537.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:18.069Z,1528913538.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:18.472Z,1528913538.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:18.880Z,1528913538.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:19.292Z,1528913539.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:19.692Z,1528913539.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:20.092Z,1528913540.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:20.473Z,1528913540.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:20.874Z,1528913540.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:21.286Z,1528913541.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:21.673Z,1528913541.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:22.075Z,1528913542.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:22.490Z,1528913542.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:22.892Z,1528913542.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:23.281Z,1528913543.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:23.684Z,1528913543.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:24.074Z,1528913544.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:24.474Z,1528913544.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:24.875Z,1528913544.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:25.290Z,1528913545.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:25.688Z,1528913545.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:26.096Z,1528913546.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:26.472Z,1528913546.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:26.876Z,1528913546.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:27.280Z,1528913547.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:27.673Z,1528913547.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:28.076Z,1528913548.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:28.487Z,1528913548.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:28.881Z,1528913548.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:29.286Z,1528913549.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:29.676Z,1528913549.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:30.084Z,1528913550.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:30.476Z,1528913550.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:30.880Z,1528913550.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:31.282Z,1528913551.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:31.684Z,1528913551.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:32.096Z,1528913552.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:32.488Z,1528913552.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:32.886Z,1528913552.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:33.293Z,1528913553.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:33.668Z,1528913553.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:34.068Z,1528913554.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:34.494Z,1528913554.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:34.894Z,1528913554.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:35.294Z,1528913555.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:35.672Z,1528913555.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:36.072Z,1528913556.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:36.472Z,1528913556.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:36.872Z,1528913556.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:37.280Z,1528913557.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:37.703Z,1528913557.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:38.098Z,1528913558.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:38.476Z,1528913558.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:38.885Z,1528913558.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:39.279Z,1528913559.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:39.680Z,1528913559.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:40.081Z,1528913560.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:40.495Z,1528913560.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:40.889Z,1528913560.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:41.284Z,1528913561.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:41.681Z,1528913561.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:42.074Z,1528913562.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:42.475Z,1528913562.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:42.896Z,1528913562.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:43.309Z,1528913563.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:43.694Z,1528913563.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:44.084Z,1528913564.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:44.480Z,1528913564.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:44.876Z,1528913564.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:45.279Z,1528913565.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:45.672Z,1528913565.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:46.088Z,1528913566.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:46.489Z,1528913566.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:46.888Z,1528913566.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:47.283Z,1528913567.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:47.688Z,1528913567.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:48.073Z,1528913568.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:48.479Z,1528913568.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:48.882Z,1528913568.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:49.309Z,1528913569.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:49.710Z,1528913569.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:50.097Z,1528913570.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:50.474Z,1528913570.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:50.889Z,1528913570.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:51.284Z,1528913571.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:51.680Z,1528913571.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:52.083Z,1528913572.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:52.504Z,1528913572.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:52.903Z,1528913572.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:53.320Z,1528913573.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:53.688Z,1528913573.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:54.083Z,1528913574.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:54.484Z,1528913574.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:54.871Z,1528913574.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:55.292Z,1528913575.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:55.704Z,1528913575.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:56.100Z,1528913576.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:56.488Z,1528913576.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:56.885Z,1528913576.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:57.264Z,1528913577.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:57.669Z,1528913577.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:58.097Z,1528913578.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:58.506Z,1528913578.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:58.904Z,1528913578.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:59.275Z,1528913579.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:12:59.673Z,1528913579.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:00.084Z,1528913580.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:00.470Z,1528913580.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:00.872Z,1528913580.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:01.298Z,1528913581.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:01.683Z,1528913581.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:02.101Z,1528913582.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:02.470Z,1528913582.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:02.872Z,1528913582.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:03.276Z,1528913583.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:03.668Z,1528913583.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:04.069Z,1528913584.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:04.484Z,1528913584.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:04.881Z,1528913584.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:05.279Z,1528913585.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:05.675Z,1528913585.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:08.779Z,1528913588.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:08.940Z,1528913588.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:09.344Z,1528913589.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:09.743Z,1528913589.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:10.140Z,1528913590.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:10.529Z,1528913590.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:10.932Z,1528913590.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:11.331Z,1528913591.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:11.732Z,1528913591.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:12.128Z,1528913592.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:12.541Z,1528913592.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:12.944Z,1528913592.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:13.344Z,1528913593.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:13.736Z,1528913593.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:14.130Z,1528913594.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:14.530Z,1528913594.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:14.935Z,1528913594.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:15.348Z,1528913595.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:15.742Z,1528913595.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:16.141Z,1528913596.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:16.536Z,1528913596.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:16.934Z,1528913596.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:17.330Z,1528913597.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:17.733Z,1528913597.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:18.148Z,1528913598.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:18.565Z,1528913598.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:18.942Z,1528913598.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:19.341Z,1528913599.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:19.748Z,1528913599.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:20.146Z,1528913600.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:20.534Z,1528913600.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:20.931Z,1528913600.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:21.345Z,1528913601.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:21.743Z,1528913601.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:22.140Z,1528913602.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:22.531Z,1528913602.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:22.944Z,1528913602.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:23.334Z,1528913603.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:23.734Z,1528913603.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:24.128Z,1528913604.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:24.546Z,1528913604.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:24.966Z,1528913604.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:25.345Z,1528913605.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:25.730Z,1528913605.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:26.144Z,1528913606.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:26.534Z,1528913606.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:26.932Z,1528913606.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:27.346Z,1528913607.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:27.768Z,1528913607.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:28.165Z,1528913608.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:28.548Z,1528913608.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:28.948Z,1528913608.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:29.347Z,1528913609.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:29.735Z,1528913609.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:30.134Z,1528913610.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:30.541Z,1528913610.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:30.968Z,1528913610.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:31.342Z,1528913611.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:31.733Z,1528913611.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:32.141Z,1528913612.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:32.551Z,1528913612.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:32.929Z,1528913612.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:33.344Z,1528913613.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:33.748Z,1528913613.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:34.167Z,1528913614.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:34.530Z,1528913614.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:34.936Z,1528913614.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:35.333Z,1528913615.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:35.746Z,1528913615.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:36.128Z,1528913616.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:36.545Z,1528913616.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:36.945Z,1528913616.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:37.365Z,1528913617.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:37.732Z,1528913617.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:38.137Z,1528913618.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:38.534Z,1528913618.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:38.933Z,1528913618.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:39.351Z,1528913619.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:39.743Z,1528913619.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:40.142Z,1528913620.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:40.548Z,1528913620.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:40.924Z,1528913620.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:41.346Z,1528913621.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:41.747Z,1528913621.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:42.148Z,1528913622.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:42.528Z,1528913622.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:42.931Z,1528913622.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:43.339Z,1528913623.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:43.741Z,1528913623.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:44.141Z,1528913624.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:44.525Z,1528913624.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:44.930Z,1528913624.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:45.348Z,1528913625.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:45.737Z,1528913625.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:46.136Z,1528913626.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:46.533Z,1528913626.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:46.924Z,1528913626.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:47.335Z,1528913627.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:47.743Z,1528913627.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:48.138Z,1528913628.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:48.536Z,1528913628.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:48.933Z,1528913628.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:49.335Z,1528913629.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:49.749Z,1528913629.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:50.142Z,1528913630.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:50.533Z,1528913630.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:50.936Z,1528913630.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:51.351Z,1528913631.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:51.739Z,1528913631.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:52.145Z,1528913632.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:52.529Z,1528913632.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:52.921Z,1528913632.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:53.348Z,1528913633.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:53.750Z,1528913633.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:54.147Z,1528913634.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:54.554Z,1528913634.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:54.924Z,1528913634.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:55.332Z,1528913635.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:55.735Z,1528913635.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:56.140Z,1528913636.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:56.527Z,1528913636.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:56.927Z,1528913636.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:57.337Z,1528913637.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:57.736Z,1528913637.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:58.137Z,1528913638.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:58.534Z,1528913638.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:58.924Z,1528913638.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:59.340Z,1528913639.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:13:59.741Z,1528913639.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:00.134Z,1528913640.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:00.527Z,1528913640.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:00.937Z,1528913640.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:01.337Z,1528913641.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:01.740Z,1528913641.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:02.142Z,1528913642.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:02.532Z,1528913642.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:02.929Z,1528913642.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:03.343Z,1528913643.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:03.739Z,1528913643.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:04.136Z,1528913644.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:04.536Z,1528913644.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:04.935Z,1528913644.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:05.344Z,1528913645.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:05.746Z,1528913645.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:08.847Z,1528913648.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:08.992Z,1528913648.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:09.407Z,1528913649.407 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:09.407Z,1528913649.407 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 295
2018-06-13T18:14:09.408Z,1528913649.408 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:14:09.434Z,1528913649.434 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:09.434Z,1528913649.434 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 295
2018-06-13T18:14:09.434Z,1528913649.434 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:14:09.435Z,1528913649.435 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:09.435Z,1528913649.435 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 295
2018-06-13T18:14:09.436Z,1528913649.436 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:14:09.522Z,1528913649.522 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:14:09.522Z,1528913649.522 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:14:09.523Z,1528913649.523 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:14:09.865Z,1528913649.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:14:09.865Z,1528913649.865 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 295
2018-06-13T18:14:09.866Z,1528913649.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:14:09.866Z,1528913649.866 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 295
2018-06-13T18:14:09.866Z,1528913649.866 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:14:09.866Z,1528913649.866 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 295
2018-06-13T18:14:10.188Z,1528913650.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:14:10.188Z,1528913650.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:14:10.188Z,1528913650.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:14:10.193Z,1528913650.193 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:14:10.193Z,1528913650.193 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:14:10.194Z,1528913650.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:14:10.194Z,1528913650.194 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:14:10.194Z,1528913650.194 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:14:10.195Z,1528913650.195 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:14:10.609Z,1528913650.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:14:10.610Z,1528913650.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:10.989Z,1528913650.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:14:10.990Z,1528913650.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:11.400Z,1528913651.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:14:11.405Z,1528913651.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:11.773Z,1528913651.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:14:11.774Z,1528913651.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:12.167Z,1528913652.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:14:12.168Z,1528913652.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:12.570Z,1528913652.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:14:12.571Z,1528913652.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:12.971Z,1528913652.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:14:12.972Z,1528913652.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:13.405Z,1528913653.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:14:13.406Z,1528913653.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:13.787Z,1528913653.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:14:13.788Z,1528913653.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:14.183Z,1528913654.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:14:14.184Z,1528913654.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:14.575Z,1528913654.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:14:14.576Z,1528913654.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:14.975Z,1528913654.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:14:14.976Z,1528913654.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:15.388Z,1528913655.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:14:15.389Z,1528913655.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:15.788Z,1528913655.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:14:15.789Z,1528913655.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:16.183Z,1528913656.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:14:16.183Z,1528913656.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:16.580Z,1528913656.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:14:16.581Z,1528913656.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:16.972Z,1528913656.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:14:16.973Z,1528913656.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:17.385Z,1528913657.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:14:17.386Z,1528913657.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:17.790Z,1528913657.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:14:17.791Z,1528913657.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:18.180Z,1528913658.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:14:18.181Z,1528913658.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:18.580Z,1528913658.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:14:18.582Z,1528913658.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:18.987Z,1528913658.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:14:18.988Z,1528913658.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:19.383Z,1528913659.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T18:14:19.384Z,1528913659.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:19.788Z,1528913659.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:14:19.791Z,1528913659.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:20.195Z,1528913660.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:14:20.196Z,1528913660.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:20.579Z,1528913660.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T18:14:20.579Z,1528913660.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:20.980Z,1528913660.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:14:20.981Z,1528913660.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:21.389Z,1528913661.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:14:21.390Z,1528913661.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:21.788Z,1528913661.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:14:21.791Z,1528913661.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:22.184Z,1528913662.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:14:22.186Z,1528913662.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:22.582Z,1528913662.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:14:22.583Z,1528913662.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:22.977Z,1528913662.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:14:22.978Z,1528913662.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:23.394Z,1528913663.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:14:23.396Z,1528913663.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:23.790Z,1528913663.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:14:23.791Z,1528913663.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:24.187Z,1528913664.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T18:14:24.187Z,1528913664.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:24.577Z,1528913664.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:14:24.578Z,1528913664.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:24.995Z,1528913664.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:14:24.998Z,1528913664.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:25.396Z,1528913665.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:14:25.398Z,1528913665.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:25.788Z,1528913665.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:14:25.790Z,1528913665.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:26.189Z,1528913666.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:14:26.190Z,1528913666.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:26.572Z,1528913666.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:14:26.573Z,1528913666.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:26.975Z,1528913666.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:14:26.976Z,1528913666.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:27.392Z,1528913667.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:14:27.394Z,1528913667.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:27.789Z,1528913667.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:14:27.790Z,1528913667.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:28.192Z,1528913668.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:14:28.193Z,1528913668.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:28.587Z,1528913668.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T18:14:28.588Z,1528913668.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:28.964Z,1528913668.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T18:14:28.981Z,1528913668.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:29.387Z,1528913669.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T18:14:29.388Z,1528913669.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:29.798Z,1528913669.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:30.187Z,1528913670.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:30.585Z,1528913670.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:30.969Z,1528913670.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:31.403Z,1528913671.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:31.799Z,1528913671.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:32.184Z,1528913672.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:32.575Z,1528913672.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:32.974Z,1528913672.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:33.383Z,1528913673.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:33.784Z,1528913673.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:34.181Z,1528913674.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:34.580Z,1528913674.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:34.973Z,1528913674.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:35.384Z,1528913675.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:35.783Z,1528913675.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:36.179Z,1528913676.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:36.575Z,1528913676.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:36.978Z,1528913676.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:37.384Z,1528913677.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:37.783Z,1528913677.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:38.184Z,1528913678.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:38.573Z,1528913678.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:38.972Z,1528913678.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:39.396Z,1528913679.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:39.789Z,1528913679.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:40.184Z,1528913680.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:40.588Z,1528913680.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:40.972Z,1528913680.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:41.380Z,1528913681.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:41.790Z,1528913681.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:42.185Z,1528913682.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:42.577Z,1528913682.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:42.979Z,1528913682.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:43.384Z,1528913683.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:43.791Z,1528913683.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:44.196Z,1528913684.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:44.581Z,1528913684.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:44.982Z,1528913684.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:45.390Z,1528913685.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:45.792Z,1528913685.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:46.186Z,1528913686.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:46.589Z,1528913686.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:46.984Z,1528913686.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:47.387Z,1528913687.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:47.801Z,1528913687.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:48.187Z,1528913688.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:48.570Z,1528913688.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:48.973Z,1528913688.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:49.379Z,1528913689.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:49.799Z,1528913689.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:50.183Z,1528913690.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:50.575Z,1528913690.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:50.973Z,1528913690.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:51.383Z,1528913691.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:51.783Z,1528913691.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:52.179Z,1528913692.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:52.575Z,1528913692.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:52.971Z,1528913692.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:53.380Z,1528913693.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:53.783Z,1528913693.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:54.179Z,1528913694.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:54.579Z,1528913694.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:54.975Z,1528913694.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:55.371Z,1528913695.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:55.781Z,1528913695.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:56.176Z,1528913696.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:56.580Z,1528913696.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:56.983Z,1528913696.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:57.384Z,1528913697.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:57.771Z,1528913697.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:58.176Z,1528913698.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:58.575Z,1528913698.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:58.972Z,1528913698.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:59.376Z,1528913699.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:14:59.783Z,1528913699.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:00.181Z,1528913700.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:00.580Z,1528913700.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:00.977Z,1528913700.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:01.373Z,1528913701.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:01.786Z,1528913701.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:02.176Z,1528913702.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:02.584Z,1528913702.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:02.983Z,1528913702.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:03.385Z,1528913703.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:03.772Z,1528913703.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:04.175Z,1528913704.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:04.575Z,1528913704.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:04.974Z,1528913704.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:05.380Z,1528913705.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:05.383Z,1528913705.383 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T18:15:05.383Z,1528913705.383 [Default:CheckIn:C.Wait] Stopped
2018-06-13T18:15:05.383Z,1528913705.383 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T18:15:05.383Z,1528913705.383 [Default:CheckIn:D] Running Loop=1
2018-06-13T18:15:05.783Z,1528913705.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:05.786Z,1528913705.786 [Default:CheckIn:D] Stopped
2018-06-13T18:15:05.786Z,1528913705.786 [Default:CheckIn:E] Running Loop=1
2018-06-13T18:15:08.891Z,1528913708.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:08.895Z,1528913708.895 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 887.872331 min 
2018-06-13T18:15:08.895Z,1528913708.895 [Default:CheckIn:E] Stopped
2018-06-13T18:15:08.895Z,1528913708.895 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T18:15:08.895Z,1528913708.895 [Default:CheckIn] Stopped
2018-06-13T18:15:08.895Z,1528913708.895 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T18:15:08.896Z,1528913708.896 [Default:CheckIn](INFO): Running loop #86
2018-06-13T18:15:08.896Z,1528913708.896 [Default:CheckIn] Running Loop=86
2018-06-13T18:15:08.896Z,1528913708.896 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T18:15:08.896Z,1528913708.896 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T18:15:09.076Z,1528913709.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:09.448Z,1528913709.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:09.856Z,1528913709.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:10.249Z,1528913710.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:10.655Z,1528913710.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:11.053Z,1528913711.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:11.460Z,1528913711.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:11.843Z,1528913711.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:12.248Z,1528913712.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:12.647Z,1528913712.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:13.048Z,1528913713.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:13.453Z,1528913713.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:13.864Z,1528913713.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:14.253Z,1528913714.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:14.654Z,1528913714.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:15.060Z,1528913715.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:15.454Z,1528913715.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:15.858Z,1528913715.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:16.261Z,1528913716.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:16.652Z,1528913716.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:17.051Z,1528913717.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:17.460Z,1528913717.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:17.854Z,1528913717.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:18.257Z,1528913718.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:18.658Z,1528913718.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:19.048Z,1528913719.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:19.454Z,1528913719.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:19.868Z,1528913719.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:20.254Z,1528913720.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:20.651Z,1528913720.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:21.045Z,1528913721.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:21.454Z,1528913721.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:21.860Z,1528913721.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:22.264Z,1528913722.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:22.651Z,1528913722.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:23.047Z,1528913723.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:23.461Z,1528913723.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:23.854Z,1528913723.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:24.268Z,1528913724.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:24.651Z,1528913724.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:25.051Z,1528913725.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:25.462Z,1528913725.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:25.861Z,1528913725.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:26.261Z,1528913726.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:26.656Z,1528913726.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:27.044Z,1528913727.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:27.457Z,1528913727.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:27.861Z,1528913727.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:28.260Z,1528913728.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:28.651Z,1528913728.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:29.048Z,1528913729.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:29.461Z,1528913729.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:29.868Z,1528913729.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:30.261Z,1528913730.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:30.656Z,1528913730.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:31.050Z,1528913731.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:31.461Z,1528913731.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:31.861Z,1528913731.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:32.260Z,1528913732.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:32.656Z,1528913732.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:33.052Z,1528913733.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:33.461Z,1528913733.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:33.861Z,1528913733.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:34.256Z,1528913734.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:34.650Z,1528913734.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:35.055Z,1528913735.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:35.454Z,1528913735.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:35.860Z,1528913735.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:36.262Z,1528913736.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:36.649Z,1528913736.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:37.051Z,1528913737.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:37.461Z,1528913737.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:37.861Z,1528913737.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:38.263Z,1528913738.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:38.649Z,1528913738.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:39.049Z,1528913739.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:39.450Z,1528913739.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:39.861Z,1528913739.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:40.262Z,1528913740.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:40.668Z,1528913740.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:41.050Z,1528913741.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:41.448Z,1528913741.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:41.864Z,1528913741.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:42.242Z,1528913742.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:42.664Z,1528913742.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:43.066Z,1528913743.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:43.464Z,1528913743.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:43.858Z,1528913743.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:44.259Z,1528913744.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:44.634Z,1528913744.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:45.059Z,1528913745.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:45.461Z,1528913745.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:45.863Z,1528913745.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:46.310Z,1528913746.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:46.668Z,1528913746.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:47.033Z,1528913747.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:47.440Z,1528913747.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:47.843Z,1528913747.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:48.236Z,1528913748.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:48.666Z,1528913748.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:49.071Z,1528913749.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:49.466Z,1528913749.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:49.852Z,1528913749.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:50.244Z,1528913750.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:50.639Z,1528913750.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:51.044Z,1528913751.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:51.448Z,1528913751.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:51.848Z,1528913751.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:52.274Z,1528913752.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:52.655Z,1528913752.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:53.039Z,1528913753.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:53.446Z,1528913753.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:53.852Z,1528913753.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:54.244Z,1528913754.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:54.652Z,1528913754.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:55.055Z,1528913755.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:55.448Z,1528913755.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:55.846Z,1528913755.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:56.252Z,1528913756.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:56.640Z,1528913756.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:57.050Z,1528913757.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:57.448Z,1528913757.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:57.851Z,1528913757.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:58.255Z,1528913758.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:58.651Z,1528913758.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:59.051Z,1528913759.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:59.448Z,1528913759.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:15:59.849Z,1528913759.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:00.241Z,1528913760.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:00.651Z,1528913760.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:01.049Z,1528913761.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:01.449Z,1528913761.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:01.846Z,1528913761.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:02.258Z,1528913762.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:02.641Z,1528913762.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:03.047Z,1528913763.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:03.448Z,1528913763.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:03.852Z,1528913763.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:04.255Z,1528913764.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:04.655Z,1528913764.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:05.042Z,1528913765.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:05.443Z,1528913765.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:05.849Z,1528913765.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:08.955Z,1528913768.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:09.131Z,1528913769.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:09.511Z,1528913769.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:09.908Z,1528913769.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:10.304Z,1528913770.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:10.699Z,1528913770.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:11.096Z,1528913771.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:11.508Z,1528913771.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:11.907Z,1528913771.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:12.304Z,1528913772.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:12.699Z,1528913772.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:13.101Z,1528913773.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:13.494Z,1528913773.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:13.908Z,1528913773.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:14.308Z,1528913774.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:14.703Z,1528913774.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:15.099Z,1528913775.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:15.499Z,1528913775.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:15.896Z,1528913775.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:16.299Z,1528913776.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:16.707Z,1528913776.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:17.108Z,1528913777.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:17.508Z,1528913777.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:17.899Z,1528913777.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:18.296Z,1528913778.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:18.699Z,1528913778.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:19.101Z,1528913779.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:19.496Z,1528913779.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:19.907Z,1528913779.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:20.307Z,1528913780.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:20.708Z,1528913780.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:21.099Z,1528913781.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:21.499Z,1528913781.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:21.898Z,1528913781.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:22.298Z,1528913782.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:22.709Z,1528913782.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:23.107Z,1528913783.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:23.507Z,1528913783.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:23.905Z,1528913783.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:24.296Z,1528913784.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:24.700Z,1528913784.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:25.103Z,1528913785.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:25.497Z,1528913785.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:25.913Z,1528913785.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:26.309Z,1528913786.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:26.706Z,1528913786.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:27.098Z,1528913787.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:27.504Z,1528913787.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:27.906Z,1528913787.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:28.308Z,1528913788.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:28.715Z,1528913788.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:29.111Z,1528913789.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:29.510Z,1528913789.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:29.910Z,1528913789.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:30.308Z,1528913790.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:30.707Z,1528913790.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:31.109Z,1528913791.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:31.507Z,1528913791.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:31.910Z,1528913791.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:32.326Z,1528913792.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:32.706Z,1528913792.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:33.109Z,1528913793.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:33.510Z,1528913793.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:33.909Z,1528913793.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:34.296Z,1528913794.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:34.722Z,1528913794.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:35.119Z,1528913795.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:35.515Z,1528913795.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:35.896Z,1528913795.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:36.292Z,1528913796.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:36.695Z,1528913796.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:37.096Z,1528913797.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:37.491Z,1528913797.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:37.923Z,1528913797.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:38.307Z,1528913798.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:38.703Z,1528913798.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:39.098Z,1528913799.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:39.504Z,1528913799.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:39.895Z,1528913799.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:40.298Z,1528913800.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:40.707Z,1528913800.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:41.103Z,1528913801.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:41.503Z,1528913801.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:41.904Z,1528913801.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:42.296Z,1528913802.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:42.698Z,1528913802.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:43.106Z,1528913803.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:43.497Z,1528913803.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:43.908Z,1528913803.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:44.304Z,1528913804.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:44.704Z,1528913804.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:45.110Z,1528913805.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:45.513Z,1528913805.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:45.900Z,1528913805.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:46.300Z,1528913806.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:46.709Z,1528913806.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:47.112Z,1528913807.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:47.504Z,1528913807.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:47.908Z,1528913807.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:48.296Z,1528913808.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:48.698Z,1528913808.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:49.099Z,1528913809.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:49.496Z,1528913809.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:49.858Z,1528913809.858 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T18:16:49.859Z,1528913809.859 [NAL9602] Data Fault, FailCount= 1
2018-06-13T18:16:49.859Z,1528913809.859 [NAL9602](ERROR): Data Fault
2018-06-13T18:16:49.921Z,1528913809.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:50.005Z,1528913810.005 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T18:16:50.258Z,1528913810.258 [NAL9602](INFO): Powering down
2018-06-13T18:16:50.315Z,1528913810.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:50.696Z,1528913810.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:51.099Z,1528913811.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:51.177Z,1528913811.177 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T18:16:51.177Z,1528913811.177 [NAL9602] No Fault, FailCount= 1
2018-06-13T18:16:51.502Z,1528913811.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:51.896Z,1528913811.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:52.303Z,1528913812.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:52.708Z,1528913812.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:53.104Z,1528913813.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:53.498Z,1528913813.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:53.908Z,1528913813.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:54.299Z,1528913814.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:54.700Z,1528913814.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:55.102Z,1528913815.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:55.495Z,1528913815.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:55.899Z,1528913815.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:56.311Z,1528913816.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:56.701Z,1528913816.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:57.099Z,1528913817.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:57.507Z,1528913817.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:57.900Z,1528913817.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:58.299Z,1528913818.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:58.712Z,1528913818.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:59.096Z,1528913819.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:59.501Z,1528913819.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:16:59.916Z,1528913819.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:00.299Z,1528913820.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:00.701Z,1528913820.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:01.100Z,1528913821.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:01.509Z,1528913821.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:01.898Z,1528913821.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:02.302Z,1528913822.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:02.699Z,1528913822.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:03.098Z,1528913823.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:03.508Z,1528913823.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:03.906Z,1528913823.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:04.312Z,1528913824.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:04.702Z,1528913824.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:05.100Z,1528913825.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:05.512Z,1528913825.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:05.902Z,1528913825.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:09.023Z,1528913829.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:09.204Z,1528913829.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:09.580Z,1528913829.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:09.975Z,1528913829.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:10.376Z,1528913830.376 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:10.376Z,1528913830.376 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 296
2018-06-13T18:17:10.376Z,1528913830.376 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:17:10.378Z,1528913830.378 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:10.378Z,1528913830.378 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 296
2018-06-13T18:17:10.378Z,1528913830.378 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:17:10.380Z,1528913830.380 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:10.380Z,1528913830.380 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 296
2018-06-13T18:17:10.380Z,1528913830.380 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:17:10.479Z,1528913830.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:17:10.479Z,1528913830.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:17:10.479Z,1528913830.479 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:17:10.866Z,1528913830.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:17:10.866Z,1528913830.866 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 296
2018-06-13T18:17:10.867Z,1528913830.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:17:10.867Z,1528913830.867 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 296
2018-06-13T18:17:10.867Z,1528913830.867 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:17:10.868Z,1528913830.868 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 296
2018-06-13T18:17:11.173Z,1528913831.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:17:11.174Z,1528913831.174 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:17:11.174Z,1528913831.174 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:17:11.174Z,1528913831.174 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:17:11.175Z,1528913831.175 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:17:11.175Z,1528913831.175 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:17:11.175Z,1528913831.175 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:17:11.176Z,1528913831.176 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:17:11.176Z,1528913831.176 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:17:11.585Z,1528913831.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:17:11.586Z,1528913831.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:11.974Z,1528913831.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:17:11.975Z,1528913831.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:12.376Z,1528913832.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:17:12.376Z,1528913832.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:12.784Z,1528913832.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:17:12.785Z,1528913832.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:13.171Z,1528913833.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:17:13.172Z,1528913833.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:13.572Z,1528913833.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:17:13.573Z,1528913833.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:13.980Z,1528913833.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:17:13.985Z,1528913833.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:14.389Z,1528913834.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:17:14.390Z,1528913834.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:14.772Z,1528913834.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:17:14.773Z,1528913834.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:15.188Z,1528913835.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:17:15.189Z,1528913835.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:15.583Z,1528913835.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:17:15.584Z,1528913835.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:15.972Z,1528913835.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:17:15.973Z,1528913835.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:16.384Z,1528913836.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:17:16.384Z,1528913836.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:16.789Z,1528913836.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:17:16.790Z,1528913836.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:17.163Z,1528913837.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:17:17.164Z,1528913837.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:17.588Z,1528913837.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:17:17.593Z,1528913837.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:17.963Z,1528913837.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:17:17.964Z,1528913837.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:18.367Z,1528913838.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:17:18.368Z,1528913838.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:18.776Z,1528913838.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:17:18.797Z,1528913838.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:19.167Z,1528913839.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:17:19.168Z,1528913839.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:19.568Z,1528913839.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:17:19.570Z,1528913839.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:19.971Z,1528913839.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:17:19.972Z,1528913839.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:20.330Z,1528913840.330 [NAL9602](INFO): Powering up NAL9602
2018-06-13T18:17:20.388Z,1528913840.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T18:17:20.389Z,1528913840.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:20.776Z,1528913840.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:17:20.776Z,1528913840.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:21.176Z,1528913841.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:17:21.177Z,1528913841.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:21.569Z,1528913841.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T18:17:21.570Z,1528913841.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:21.974Z,1528913841.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:17:21.975Z,1528913841.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:22.373Z,1528913842.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:17:22.374Z,1528913842.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:22.771Z,1528913842.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:17:22.772Z,1528913842.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:23.170Z,1528913843.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:17:23.171Z,1528913843.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:23.573Z,1528913843.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:17:23.574Z,1528913843.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:23.975Z,1528913843.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:17:23.976Z,1528913843.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:24.370Z,1528913844.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:17:24.371Z,1528913844.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:24.773Z,1528913844.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:17:24.774Z,1528913844.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:25.169Z,1528913845.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T18:17:25.170Z,1528913845.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:25.576Z,1528913845.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:17:25.577Z,1528913845.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:25.975Z,1528913845.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:17:25.975Z,1528913845.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:26.375Z,1528913846.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:17:26.376Z,1528913846.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:26.770Z,1528913846.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:17:26.771Z,1528913846.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:27.171Z,1528913847.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:17:27.172Z,1528913847.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:27.570Z,1528913847.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:17:27.571Z,1528913847.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:27.974Z,1528913847.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:17:27.975Z,1528913847.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:28.374Z,1528913848.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:17:28.374Z,1528913848.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:28.775Z,1528913848.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:17:28.776Z,1528913848.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:29.173Z,1528913849.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:17:29.174Z,1528913849.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:29.574Z,1528913849.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T18:17:29.575Z,1528913849.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:29.970Z,1528913849.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T18:17:29.970Z,1528913849.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:30.373Z,1528913850.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T18:17:30.374Z,1528913850.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:30.779Z,1528913850.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:31.131Z,1528913851.131 [NAL9602](INFO): NAL9602 initialized
2018-06-13T18:17:31.175Z,1528913851.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:31.573Z,1528913851.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:31.983Z,1528913851.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:32.379Z,1528913852.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:32.780Z,1528913852.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:33.175Z,1528913853.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:33.575Z,1528913853.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:33.969Z,1528913853.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:34.383Z,1528913854.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:34.788Z,1528913854.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:35.184Z,1528913855.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:35.579Z,1528913855.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:35.974Z,1528913855.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:36.376Z,1528913856.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:36.776Z,1528913856.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:37.181Z,1528913857.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:37.588Z,1528913857.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:37.988Z,1528913857.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:38.386Z,1528913858.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:38.780Z,1528913858.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:39.176Z,1528913859.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:39.575Z,1528913859.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:39.974Z,1528913859.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:40.386Z,1528913860.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:40.783Z,1528913860.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:41.183Z,1528913861.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:41.576Z,1528913861.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:41.974Z,1528913861.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:42.375Z,1528913862.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:42.776Z,1528913862.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:43.180Z,1528913863.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:43.588Z,1528913863.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:43.988Z,1528913863.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:44.375Z,1528913864.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:44.774Z,1528913864.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:45.184Z,1528913865.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:45.585Z,1528913865.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:45.981Z,1528913865.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:46.390Z,1528913866.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:46.786Z,1528913866.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:47.189Z,1528913867.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:47.582Z,1528913867.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:47.988Z,1528913867.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:48.381Z,1528913868.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:48.784Z,1528913868.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:49.200Z,1528913869.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:49.596Z,1528913869.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:49.996Z,1528913869.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:50.387Z,1528913870.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:50.784Z,1528913870.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:51.168Z,1528913871.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:51.565Z,1528913871.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:51.969Z,1528913871.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:52.400Z,1528913872.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:52.804Z,1528913872.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:53.190Z,1528913873.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:53.576Z,1528913873.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:53.973Z,1528913873.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:54.368Z,1528913874.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:54.776Z,1528913874.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:55.200Z,1528913875.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:55.583Z,1528913875.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:56.004Z,1528913876.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:56.374Z,1528913876.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:56.774Z,1528913876.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:57.175Z,1528913877.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:57.574Z,1528913877.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:57.970Z,1528913877.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:58.387Z,1528913878.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:58.788Z,1528913878.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:59.179Z,1528913879.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:59.579Z,1528913879.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:17:59.978Z,1528913879.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:00.375Z,1528913880.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:00.779Z,1528913880.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:01.184Z,1528913881.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:01.583Z,1528913881.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:01.987Z,1528913881.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:02.378Z,1528913882.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:02.774Z,1528913882.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:03.179Z,1528913883.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:03.581Z,1528913883.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:03.974Z,1528913883.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:04.392Z,1528913884.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:04.792Z,1528913884.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:05.185Z,1528913885.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:05.581Z,1528913885.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:05.979Z,1528913885.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:06.377Z,1528913886.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:06.784Z,1528913886.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:07.192Z,1528913887.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:10.299Z,1528913890.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:10.489Z,1528913890.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:10.870Z,1528913890.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:11.270Z,1528913891.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:11.648Z,1528913891.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:12.066Z,1528913892.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:12.463Z,1528913892.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:12.875Z,1528913892.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:13.272Z,1528913893.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:13.645Z,1528913893.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:14.075Z,1528913894.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:14.458Z,1528913894.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:14.859Z,1528913894.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:15.251Z,1528913895.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:15.652Z,1528913895.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:16.048Z,1528913896.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:16.460Z,1528913896.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:16.859Z,1528913896.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:17.260Z,1528913897.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:17.652Z,1528913897.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:18.056Z,1528913898.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:18.449Z,1528913898.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:18.849Z,1528913898.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:19.256Z,1528913899.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:19.659Z,1528913899.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:20.055Z,1528913900.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:20.450Z,1528913900.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:20.850Z,1528913900.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:21.250Z,1528913901.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:21.650Z,1528913901.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:22.050Z,1528913902.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:22.460Z,1528913902.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:22.883Z,1528913902.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:23.257Z,1528913903.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:23.655Z,1528913903.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:24.063Z,1528913904.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:24.448Z,1528913904.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:24.856Z,1528913904.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:25.258Z,1528913905.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:25.660Z,1528913905.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:26.060Z,1528913906.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:26.454Z,1528913906.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:26.847Z,1528913906.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:27.251Z,1528913907.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:27.654Z,1528913907.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:28.048Z,1528913908.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:28.464Z,1528913908.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:28.859Z,1528913908.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:29.260Z,1528913909.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:29.652Z,1528913909.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:30.058Z,1528913910.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:30.450Z,1528913910.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:30.856Z,1528913910.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:31.261Z,1528913911.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:31.661Z,1528913911.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:32.064Z,1528913912.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:32.454Z,1528913912.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:32.861Z,1528913912.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:33.248Z,1528913913.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:33.654Z,1528913913.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:34.049Z,1528913914.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:34.461Z,1528913914.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:34.865Z,1528913914.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:35.272Z,1528913915.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:35.656Z,1528913915.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:36.063Z,1528913916.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:36.450Z,1528913916.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:36.860Z,1528913916.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:37.261Z,1528913917.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:37.667Z,1528913917.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:38.061Z,1528913918.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:38.460Z,1528913918.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:38.857Z,1528913918.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:39.264Z,1528913919.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:39.664Z,1528913919.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:40.060Z,1528913920.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:40.465Z,1528913920.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:40.865Z,1528913920.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:41.269Z,1528913921.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:41.655Z,1528913921.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:42.055Z,1528913922.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:42.456Z,1528913922.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:42.853Z,1528913922.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:43.262Z,1528913923.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:43.666Z,1528913923.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:44.062Z,1528913924.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:44.454Z,1528913924.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:44.853Z,1528913924.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:45.252Z,1528913925.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:45.655Z,1528913925.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:46.053Z,1528913926.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:46.466Z,1528913926.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:46.865Z,1528913926.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:47.262Z,1528913927.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:47.652Z,1528913927.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:48.054Z,1528913928.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:48.454Z,1528913928.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:48.852Z,1528913928.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:49.266Z,1528913929.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:49.661Z,1528913929.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:50.061Z,1528913930.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:50.454Z,1528913930.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:50.857Z,1528913930.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:51.265Z,1528913931.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:51.661Z,1528913931.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:52.064Z,1528913932.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:52.467Z,1528913932.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:52.869Z,1528913932.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:53.268Z,1528913933.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:53.649Z,1528913933.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:54.076Z,1528913934.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:54.448Z,1528913934.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:54.848Z,1528913934.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:55.279Z,1528913935.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:55.659Z,1528913935.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:56.051Z,1528913936.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:56.448Z,1528913936.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:56.846Z,1528913936.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:57.247Z,1528913937.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:57.652Z,1528913937.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:58.048Z,1528913938.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:58.459Z,1528913938.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:58.859Z,1528913938.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:59.254Z,1528913939.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:18:59.649Z,1528913939.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:00.049Z,1528913940.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:00.447Z,1528913940.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:00.852Z,1528913940.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:01.255Z,1528913941.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:01.655Z,1528913941.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:02.055Z,1528913942.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:02.456Z,1528913942.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:02.848Z,1528913942.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:03.249Z,1528913943.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:03.654Z,1528913943.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:04.047Z,1528913944.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:04.455Z,1528913944.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:04.860Z,1528913944.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:05.254Z,1528913945.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:05.651Z,1528913945.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:06.052Z,1528913946.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:09.164Z,1528913949.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:09.336Z,1528913949.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:09.734Z,1528913949.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:10.138Z,1528913950.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:10.536Z,1528913950.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:10.916Z,1528913950.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:11.311Z,1528913951.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:11.716Z,1528913951.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:12.111Z,1528913952.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:12.535Z,1528913952.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:12.939Z,1528913952.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:13.323Z,1528913953.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:13.711Z,1528913953.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:14.114Z,1528913954.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:14.514Z,1528913954.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:14.911Z,1528913954.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:15.323Z,1528913955.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:15.723Z,1528913955.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:16.118Z,1528913956.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:16.514Z,1528913956.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:16.913Z,1528913956.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:17.311Z,1528913957.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:17.714Z,1528913957.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:18.113Z,1528913958.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:18.519Z,1528913958.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:18.922Z,1528913958.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:19.319Z,1528913959.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:19.711Z,1528913959.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:20.113Z,1528913960.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:20.515Z,1528913960.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:20.911Z,1528913960.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:21.319Z,1528913961.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:21.723Z,1528913961.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:22.119Z,1528913962.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:22.515Z,1528913962.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:22.914Z,1528913962.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:23.311Z,1528913963.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:23.715Z,1528913963.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:24.116Z,1528913964.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:24.524Z,1528913964.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:24.923Z,1528913964.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:25.320Z,1528913965.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:25.714Z,1528913965.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:26.112Z,1528913966.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:26.514Z,1528913966.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:26.912Z,1528913966.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:27.324Z,1528913967.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:27.723Z,1528913967.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:28.121Z,1528913968.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:28.513Z,1528913968.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:28.920Z,1528913968.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:29.312Z,1528913969.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:29.713Z,1528913969.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:30.113Z,1528913970.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:30.519Z,1528913970.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:30.922Z,1528913970.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:31.324Z,1528913971.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:31.714Z,1528913971.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:32.115Z,1528913972.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:32.514Z,1528913972.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:32.911Z,1528913972.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:33.319Z,1528913973.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:33.722Z,1528913973.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:34.119Z,1528913974.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:34.518Z,1528913974.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:34.916Z,1528913974.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:35.312Z,1528913975.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:35.716Z,1528913975.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:36.128Z,1528913976.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:36.524Z,1528913976.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:36.928Z,1528913976.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:37.319Z,1528913977.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:37.712Z,1528913977.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:38.113Z,1528913978.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:38.514Z,1528913978.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:38.912Z,1528913978.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:39.319Z,1528913979.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:39.723Z,1528913979.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:40.119Z,1528913980.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:40.513Z,1528913980.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:40.920Z,1528913980.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:41.314Z,1528913981.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:41.714Z,1528913981.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:42.113Z,1528913982.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:42.522Z,1528913982.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:42.923Z,1528913982.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:43.319Z,1528913983.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:43.715Z,1528913983.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:44.113Z,1528913984.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:44.513Z,1528913984.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:44.914Z,1528913984.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:45.323Z,1528913985.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:45.723Z,1528913985.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:46.122Z,1528913986.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:46.514Z,1528913986.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:46.912Z,1528913986.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:47.314Z,1528913987.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:47.714Z,1528913987.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:48.113Z,1528913988.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:48.523Z,1528913988.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:48.922Z,1528913988.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:49.324Z,1528913989.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:49.714Z,1528913989.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:50.116Z,1528913990.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:50.524Z,1528913990.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:50.914Z,1528913990.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:51.323Z,1528913991.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:51.728Z,1528913991.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:52.123Z,1528913992.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:52.514Z,1528913992.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:52.913Z,1528913992.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:53.315Z,1528913993.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:53.713Z,1528913993.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:54.120Z,1528913994.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:54.524Z,1528913994.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:54.922Z,1528913994.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:55.323Z,1528913995.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:55.714Z,1528913995.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:56.114Z,1528913996.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:56.514Z,1528913996.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:56.914Z,1528913996.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:57.320Z,1528913997.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:57.723Z,1528913997.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:58.123Z,1528913998.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:58.516Z,1528913998.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:58.913Z,1528913998.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:59.316Z,1528913999.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:19:59.713Z,1528913999.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:00.116Z,1528914000.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:00.523Z,1528914000.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:00.922Z,1528914000.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:01.319Z,1528914001.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:01.715Z,1528914001.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:02.114Z,1528914002.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:02.523Z,1528914002.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:02.916Z,1528914002.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:03.319Z,1528914003.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:03.747Z,1528914003.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:04.124Z,1528914004.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:04.516Z,1528914004.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:04.928Z,1528914004.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:05.312Z,1528914005.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:05.719Z,1528914005.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:06.119Z,1528914006.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:06.524Z,1528914006.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:06.927Z,1528914006.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:07.324Z,1528914007.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:10.451Z,1528914010.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:10.454Z,1528914010.454 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T18:15:08.9Z
2018-06-13T18:20:10.454Z,1528914010.454 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T18:20:10.454Z,1528914010.454 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T18:20:10.612Z,1528914010.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:11.765Z,1528914011.765 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:11.765Z,1528914011.765 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 297
2018-06-13T18:20:11.765Z,1528914011.765 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:20:11.767Z,1528914011.767 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:11.767Z,1528914011.767 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 297
2018-06-13T18:20:11.767Z,1528914011.767 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:20:11.769Z,1528914011.769 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:11.769Z,1528914011.769 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 297
2018-06-13T18:20:11.769Z,1528914011.769 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:20:11.853Z,1528914011.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:20:11.853Z,1528914011.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:20:11.854Z,1528914011.854 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:20:12.029Z,1528914012.029 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:20:12.029Z,1528914012.029 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 297
2018-06-13T18:20:12.030Z,1528914012.030 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:20:12.030Z,1528914012.030 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 297
2018-06-13T18:20:12.030Z,1528914012.030 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:20:12.030Z,1528914012.030 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 297
2018-06-13T18:20:12.320Z,1528914012.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:20:12.320Z,1528914012.320 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:20:12.321Z,1528914012.321 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:20:12.321Z,1528914012.321 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:20:12.322Z,1528914012.322 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:20:12.322Z,1528914012.322 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:20:12.322Z,1528914012.322 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:20:12.323Z,1528914012.323 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:20:12.323Z,1528914012.323 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:20:12.712Z,1528914012.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-06-13T18:20:12.717Z,1528914012.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:13.106Z,1528914013.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-06-13T18:20:13.107Z,1528914013.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:13.510Z,1528914013.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T18:20:13.511Z,1528914013.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:13.910Z,1528914013.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T18:20:13.911Z,1528914013.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:17.061Z,1528914017.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T18:20:17.062Z,1528914017.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:17.148Z,1528914017.148 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0344.lzma
2018-06-13T18:20:17.218Z,1528914017.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T18:20:17.219Z,1528914017.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:17.610Z,1528914017.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T18:20:17.611Z,1528914017.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:17.946Z,1528914017.946 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0344.lzma.bak
2018-06-13T18:20:17.946Z,1528914017.946 [DataOverHttps](INFO): SBD MOMSN=8329702
2018-06-13T18:20:18.013Z,1528914018.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T18:20:18.014Z,1528914018.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:19.913Z,1528914019.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T18:20:19.914Z,1528914019.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:20.064Z,1528914020.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T18:20:20.065Z,1528914020.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:23.206Z,1528914023.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T18:20:23.207Z,1528914023.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:23.370Z,1528914023.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:20:23.371Z,1528914023.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:23.753Z,1528914023.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:20:23.754Z,1528914023.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:24.157Z,1528914024.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:20:24.158Z,1528914024.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:24.553Z,1528914024.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:20:24.554Z,1528914024.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:24.953Z,1528914024.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:20:24.954Z,1528914024.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:25.362Z,1528914025.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:20:25.363Z,1528914025.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:25.756Z,1528914025.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:20:25.758Z,1528914025.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:26.157Z,1528914026.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:20:26.158Z,1528914026.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:29.323Z,1528914029.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:20:29.325Z,1528914029.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:29.447Z,1528914029.447 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0345.lzma
2018-06-13T18:20:29.515Z,1528914029.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T18:20:29.516Z,1528914029.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:29.906Z,1528914029.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T18:20:29.907Z,1528914029.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:30.246Z,1528914030.246 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0345.lzma.bak
2018-06-13T18:20:30.246Z,1528914030.246 [DataOverHttps](INFO): SBD MOMSN=8329704
2018-06-13T18:20:30.326Z,1528914030.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T18:20:30.327Z,1528914030.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:32.220Z,1528914032.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:32.223Z,1528914032.223 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T18:20:32.223Z,1528914032.223 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T18:20:32.224Z,1528914032.224 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T18:20:32.380Z,1528914032.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:35.474Z,1528914035.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:35.636Z,1528914035.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:36.018Z,1528914036.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:36.446Z,1528914036.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:36.820Z,1528914036.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:37.215Z,1528914037.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:37.616Z,1528914037.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:38.008Z,1528914038.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:38.420Z,1528914038.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:38.824Z,1528914038.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:39.239Z,1528914039.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:39.614Z,1528914039.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:40.016Z,1528914040.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:40.427Z,1528914040.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:40.815Z,1528914040.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:41.228Z,1528914041.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:41.618Z,1528914041.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:42.028Z,1528914042.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:42.424Z,1528914042.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:42.811Z,1528914042.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:43.220Z,1528914043.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:43.636Z,1528914043.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:44.028Z,1528914044.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:44.449Z,1528914044.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:44.826Z,1528914044.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:45.236Z,1528914045.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:45.628Z,1528914045.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:46.036Z,1528914046.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:46.411Z,1528914046.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:46.903Z,1528914046.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:47.252Z,1528914047.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:47.712Z,1528914047.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:48.016Z,1528914048.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:48.472Z,1528914048.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:48.985Z,1528914048.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:49.227Z,1528914049.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:49.614Z,1528914049.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:50.027Z,1528914050.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:50.432Z,1528914050.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:50.843Z,1528914050.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:51.218Z,1528914051.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:51.628Z,1528914051.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:52.018Z,1528914052.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:52.421Z,1528914052.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:52.827Z,1528914052.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:53.235Z,1528914053.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:53.637Z,1528914053.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:54.036Z,1528914054.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:54.418Z,1528914054.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:54.840Z,1528914054.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:55.206Z,1528914055.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:55.613Z,1528914055.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:56.008Z,1528914056.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:56.411Z,1528914056.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:56.818Z,1528914056.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:57.216Z,1528914057.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:57.612Z,1528914057.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:58.007Z,1528914058.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:58.404Z,1528914058.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:58.807Z,1528914058.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:59.223Z,1528914059.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:20:59.612Z,1528914059.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:00.015Z,1528914060.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:00.420Z,1528914060.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:00.808Z,1528914060.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:01.207Z,1528914061.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:01.619Z,1528914061.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:02.004Z,1528914062.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:02.423Z,1528914062.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:02.845Z,1528914062.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:03.220Z,1528914063.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:03.606Z,1528914063.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:04.011Z,1528914064.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:04.405Z,1528914064.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:04.807Z,1528914064.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:05.216Z,1528914065.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:05.620Z,1528914065.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:06.020Z,1528914066.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:06.421Z,1528914066.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:06.804Z,1528914066.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:07.218Z,1528914067.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:07.614Z,1528914067.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:08.005Z,1528914068.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:08.417Z,1528914068.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:08.821Z,1528914068.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:09.214Z,1528914069.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:09.608Z,1528914069.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:10.011Z,1528914070.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:10.405Z,1528914070.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:10.808Z,1528914070.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:11.213Z,1528914071.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:11.613Z,1528914071.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:12.023Z,1528914072.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:12.417Z,1528914072.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:12.806Z,1528914072.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:13.215Z,1528914073.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:13.630Z,1528914073.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:14.006Z,1528914074.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:14.417Z,1528914074.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:14.822Z,1528914074.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:15.213Z,1528914075.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:15.607Z,1528914075.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:16.016Z,1528914076.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:16.408Z,1528914076.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:16.812Z,1528914076.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:17.212Z,1528914077.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:17.624Z,1528914077.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:18.022Z,1528914078.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:18.422Z,1528914078.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:18.808Z,1528914078.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:19.209Z,1528914079.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:19.620Z,1528914079.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:20.014Z,1528914080.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:20.424Z,1528914080.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:20.830Z,1528914080.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:21.218Z,1528914081.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:21.621Z,1528914081.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:22.010Z,1528914082.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:22.425Z,1528914082.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:22.802Z,1528914082.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:23.206Z,1528914083.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:23.635Z,1528914083.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:24.015Z,1528914084.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:24.415Z,1528914084.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:24.803Z,1528914084.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:25.214Z,1528914085.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:25.609Z,1528914085.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:26.012Z,1528914086.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:26.416Z,1528914086.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:26.824Z,1528914086.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:27.213Z,1528914087.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:27.610Z,1528914087.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:28.007Z,1528914088.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:28.414Z,1528914088.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:28.821Z,1528914088.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:29.222Z,1528914089.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:29.617Z,1528914089.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:30.016Z,1528914090.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:30.426Z,1528914090.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:30.822Z,1528914090.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:31.218Z,1528914091.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:31.618Z,1528914091.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:32.000Z,1528914092.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:32.426Z,1528914092.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:32.825Z,1528914092.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:33.226Z,1528914093.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:33.621Z,1528914093.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:34.005Z,1528914094.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:34.431Z,1528914094.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:34.814Z,1528914094.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:35.215Z,1528914095.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:35.606Z,1528914095.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:38.743Z,1528914098.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:38.899Z,1528914098.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:39.296Z,1528914099.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:39.707Z,1528914099.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:40.093Z,1528914100.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:40.490Z,1528914100.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:40.902Z,1528914100.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:41.272Z,1528914101.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:41.707Z,1528914101.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:42.106Z,1528914102.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:42.504Z,1528914102.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:42.905Z,1528914102.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:43.275Z,1528914103.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:43.677Z,1528914103.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:44.080Z,1528914104.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:44.482Z,1528914104.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:44.903Z,1528914104.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:45.308Z,1528914105.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:45.684Z,1528914105.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:46.078Z,1528914106.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:46.484Z,1528914106.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:46.880Z,1528914106.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:47.287Z,1528914107.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:47.688Z,1528914107.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:48.087Z,1528914108.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:48.493Z,1528914108.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:48.883Z,1528914108.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:49.280Z,1528914109.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:49.679Z,1528914109.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:50.082Z,1528914110.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:50.492Z,1528914110.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:50.887Z,1528914110.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:51.288Z,1528914111.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:51.679Z,1528914111.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:52.089Z,1528914112.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:52.479Z,1528914112.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:52.891Z,1528914112.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:53.278Z,1528914113.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:53.696Z,1528914113.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:54.088Z,1528914114.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:54.492Z,1528914114.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:54.879Z,1528914114.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:55.292Z,1528914115.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:55.681Z,1528914115.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:56.080Z,1528914116.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:56.495Z,1528914116.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:56.898Z,1528914116.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:57.289Z,1528914117.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:57.683Z,1528914117.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:58.088Z,1528914118.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:58.481Z,1528914118.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:58.892Z,1528914118.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:59.287Z,1528914119.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:21:59.690Z,1528914119.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:00.105Z,1528914120.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:00.496Z,1528914120.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:00.890Z,1528914120.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:01.284Z,1528914121.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:01.686Z,1528914121.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:02.080Z,1528914122.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:02.494Z,1528914122.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:02.889Z,1528914122.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:03.290Z,1528914123.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:03.691Z,1528914123.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:04.077Z,1528914124.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:04.488Z,1528914124.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:04.886Z,1528914124.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:05.269Z,1528914125.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:05.696Z,1528914125.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:06.098Z,1528914126.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:06.508Z,1528914126.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:06.872Z,1528914126.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:07.274Z,1528914127.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:07.678Z,1528914127.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:08.076Z,1528914128.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:08.504Z,1528914128.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:08.905Z,1528914128.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:09.283Z,1528914129.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:09.679Z,1528914129.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:10.078Z,1528914130.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:10.479Z,1528914130.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:10.881Z,1528914130.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:11.284Z,1528914131.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:11.684Z,1528914131.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:12.084Z,1528914132.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:12.484Z,1528914132.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:12.878Z,1528914132.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:13.291Z,1528914133.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:13.679Z,1528914133.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:14.078Z,1528914134.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:14.487Z,1528914134.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:14.884Z,1528914134.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:15.284Z,1528914135.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:15.680Z,1528914135.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:16.076Z,1528914136.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:16.484Z,1528914136.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:16.887Z,1528914136.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:17.285Z,1528914137.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:17.679Z,1528914137.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:18.080Z,1528914138.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:18.484Z,1528914138.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:18.887Z,1528914138.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:19.288Z,1528914139.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:19.676Z,1528914139.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:20.079Z,1528914140.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:20.487Z,1528914140.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:20.887Z,1528914140.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:21.284Z,1528914141.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:21.680Z,1528914141.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:22.092Z,1528914142.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:22.484Z,1528914142.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:22.887Z,1528914142.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:23.284Z,1528914143.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:23.680Z,1528914143.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:24.093Z,1528914144.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:24.485Z,1528914144.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:24.896Z,1528914144.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:25.288Z,1528914145.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:25.679Z,1528914145.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:26.080Z,1528914146.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:26.489Z,1528914146.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:26.889Z,1528914146.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:27.287Z,1528914147.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:27.685Z,1528914147.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:28.078Z,1528914148.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:28.487Z,1528914148.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:28.889Z,1528914148.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:29.284Z,1528914149.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:29.681Z,1528914149.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:30.083Z,1528914150.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:30.485Z,1528914150.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:30.893Z,1528914150.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:31.296Z,1528914151.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:31.675Z,1528914151.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:32.078Z,1528914152.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:32.496Z,1528914152.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:32.896Z,1528914152.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:36.020Z,1528914156.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:36.182Z,1528914156.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:36.573Z,1528914156.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:36.987Z,1528914156.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:37.372Z,1528914157.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:37.779Z,1528914157.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:38.186Z,1528914158.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:38.578Z,1528914158.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:38.976Z,1528914158.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:39.365Z,1528914159.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:39.778Z,1528914159.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:40.159Z,1528914160.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:40.587Z,1528914160.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:40.992Z,1528914160.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:41.391Z,1528914161.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:41.787Z,1528914161.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:42.160Z,1528914162.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:42.561Z,1528914162.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:42.985Z,1528914162.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:43.369Z,1528914163.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:43.802Z,1528914163.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:44.171Z,1528914164.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:44.574Z,1528914164.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:44.973Z,1528914164.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:45.363Z,1528914165.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:45.761Z,1528914165.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:46.166Z,1528914166.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:46.576Z,1528914166.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:46.972Z,1528914166.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:47.370Z,1528914167.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:47.764Z,1528914167.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:48.180Z,1528914168.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:48.564Z,1528914168.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:48.960Z,1528914168.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:49.361Z,1528914169.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:49.779Z,1528914169.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:50.173Z,1528914170.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:50.574Z,1528914170.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:50.967Z,1528914170.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:51.360Z,1528914171.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:51.768Z,1528914171.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:52.164Z,1528914172.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:52.573Z,1528914172.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:52.972Z,1528914172.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:53.380Z,1528914173.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:53.763Z,1528914173.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:54.168Z,1528914174.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:54.564Z,1528914174.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:54.968Z,1528914174.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:55.360Z,1528914175.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:55.774Z,1528914175.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:56.190Z,1528914176.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:56.568Z,1528914176.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:56.969Z,1528914176.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:57.368Z,1528914177.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:57.765Z,1528914177.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:58.156Z,1528914178.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:58.581Z,1528914178.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:58.979Z,1528914178.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:59.382Z,1528914179.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:22:59.756Z,1528914179.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:00.177Z,1528914180.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:00.559Z,1528914180.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:00.957Z,1528914180.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:01.359Z,1528914181.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:01.771Z,1528914181.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:02.170Z,1528914182.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:02.568Z,1528914182.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:02.962Z,1528914182.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:03.364Z,1528914183.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:03.763Z,1528914183.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:04.168Z,1528914184.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:04.572Z,1528914184.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:04.972Z,1528914184.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:05.367Z,1528914185.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:05.763Z,1528914185.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:06.162Z,1528914186.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:06.562Z,1528914186.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:06.972Z,1528914186.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:07.362Z,1528914187.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:07.772Z,1528914187.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:08.180Z,1528914188.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:08.580Z,1528914188.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:08.964Z,1528914188.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:09.375Z,1528914189.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:09.764Z,1528914189.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:10.160Z,1528914190.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:10.578Z,1528914190.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:10.976Z,1528914190.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:11.372Z,1528914191.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:11.772Z,1528914191.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:12.164Z,1528914192.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:12.577Z,1528914192.577 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:12.577Z,1528914192.577 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 298
2018-06-13T18:23:12.577Z,1528914192.577 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:23:12.579Z,1528914192.579 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:12.579Z,1528914192.579 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 298
2018-06-13T18:23:12.579Z,1528914192.579 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:23:12.581Z,1528914192.581 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:12.581Z,1528914192.581 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 298
2018-06-13T18:23:12.581Z,1528914192.581 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:23:12.658Z,1528914192.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:23:12.658Z,1528914192.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:23:12.658Z,1528914192.658 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:23:13.061Z,1528914193.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:23:13.061Z,1528914193.061 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 298
2018-06-13T18:23:13.061Z,1528914193.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:23:13.062Z,1528914193.062 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 298
2018-06-13T18:23:13.062Z,1528914193.062 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:23:13.062Z,1528914193.062 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 298
2018-06-13T18:23:13.376Z,1528914193.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:23:13.376Z,1528914193.376 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:23:13.376Z,1528914193.376 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:23:13.377Z,1528914193.377 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:23:13.377Z,1528914193.377 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:23:13.378Z,1528914193.378 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:23:13.378Z,1528914193.378 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:23:13.378Z,1528914193.378 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:23:13.379Z,1528914193.379 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:23:13.776Z,1528914193.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:23:13.778Z,1528914193.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:14.160Z,1528914194.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:23:14.161Z,1528914194.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:14.571Z,1528914194.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:23:14.571Z,1528914194.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:14.970Z,1528914194.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:23:14.971Z,1528914194.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:15.370Z,1528914195.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:23:15.371Z,1528914195.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:15.762Z,1528914195.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:23:15.763Z,1528914195.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:16.161Z,1528914196.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:23:16.162Z,1528914196.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:16.571Z,1528914196.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:23:16.572Z,1528914196.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:16.970Z,1528914196.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:23:16.971Z,1528914196.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:17.366Z,1528914197.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:23:17.367Z,1528914197.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:17.764Z,1528914197.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:23:17.765Z,1528914197.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:18.160Z,1528914198.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:23:18.162Z,1528914198.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:18.572Z,1528914198.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:23:18.573Z,1528914198.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:18.970Z,1528914198.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:23:18.971Z,1528914198.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:19.370Z,1528914199.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:23:19.371Z,1528914199.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:19.764Z,1528914199.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:23:19.764Z,1528914199.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:20.164Z,1528914200.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:23:20.165Z,1528914200.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:20.572Z,1528914200.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:23:20.573Z,1528914200.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:20.970Z,1528914200.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:23:20.971Z,1528914200.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:21.371Z,1528914201.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:23:21.372Z,1528914201.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:21.762Z,1528914201.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:23:21.763Z,1528914201.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:22.163Z,1528914202.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:23:22.164Z,1528914202.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:22.570Z,1528914202.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T18:23:22.571Z,1528914202.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:22.970Z,1528914202.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:23:22.971Z,1528914202.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:23.376Z,1528914203.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:23:23.377Z,1528914203.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:23.770Z,1528914203.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T18:23:23.771Z,1528914203.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:24.166Z,1528914204.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:23:24.167Z,1528914204.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:24.576Z,1528914204.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:23:24.577Z,1528914204.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:24.979Z,1528914204.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:23:24.980Z,1528914204.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:25.369Z,1528914205.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:23:25.370Z,1528914205.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:25.765Z,1528914205.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:23:25.766Z,1528914205.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:26.171Z,1528914206.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:23:26.172Z,1528914206.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:26.571Z,1528914206.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:23:26.572Z,1528914206.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:26.976Z,1528914206.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:23:26.977Z,1528914206.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:27.387Z,1528914207.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T18:23:27.388Z,1528914207.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:27.763Z,1528914207.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:23:27.764Z,1528914207.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:28.168Z,1528914208.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:23:28.169Z,1528914208.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:28.574Z,1528914208.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:23:28.575Z,1528914208.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:28.974Z,1528914208.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:23:28.974Z,1528914208.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:29.380Z,1528914209.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:23:29.381Z,1528914209.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:29.768Z,1528914209.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:23:29.769Z,1528914209.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:30.161Z,1528914210.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:23:30.162Z,1528914210.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:30.575Z,1528914210.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:23:30.576Z,1528914210.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:30.984Z,1528914210.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:23:30.985Z,1528914210.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:31.376Z,1528914211.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:23:31.377Z,1528914211.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:31.769Z,1528914211.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T18:23:31.770Z,1528914211.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:32.176Z,1528914212.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T18:23:32.177Z,1528914212.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:32.575Z,1528914212.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T18:23:32.576Z,1528914212.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:32.978Z,1528914212.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:36.087Z,1528914216.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:36.271Z,1528914216.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:36.665Z,1528914216.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:37.074Z,1528914217.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:37.437Z,1528914217.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:37.870Z,1528914217.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:38.274Z,1528914218.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:38.651Z,1528914218.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:39.048Z,1528914219.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:39.452Z,1528914219.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:39.848Z,1528914219.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:40.250Z,1528914220.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:40.689Z,1528914220.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:41.060Z,1528914221.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:41.455Z,1528914221.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:41.852Z,1528914221.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:42.246Z,1528914222.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:42.652Z,1528914222.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:43.057Z,1528914223.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:43.445Z,1528914223.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:43.860Z,1528914223.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:44.281Z,1528914224.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:44.655Z,1528914224.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:45.056Z,1528914225.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:45.456Z,1528914225.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:45.848Z,1528914225.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:46.250Z,1528914226.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:46.661Z,1528914226.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:47.065Z,1528914227.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:47.485Z,1528914227.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:47.866Z,1528914227.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:48.259Z,1528914228.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:48.652Z,1528914228.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:49.055Z,1528914229.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:49.459Z,1528914229.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:49.859Z,1528914229.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:50.266Z,1528914230.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:50.673Z,1528914230.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:51.055Z,1528914231.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:51.455Z,1528914231.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:51.861Z,1528914231.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:52.252Z,1528914232.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:52.666Z,1528914232.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:53.061Z,1528914233.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:53.461Z,1528914233.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:53.856Z,1528914233.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:54.252Z,1528914234.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:54.660Z,1528914234.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:55.055Z,1528914235.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:55.459Z,1528914235.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:55.861Z,1528914235.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:56.261Z,1528914236.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:56.662Z,1528914236.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:57.060Z,1528914237.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:57.461Z,1528914237.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:57.861Z,1528914237.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:58.248Z,1528914238.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:58.678Z,1528914238.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:59.072Z,1528914239.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:59.471Z,1528914239.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:23:59.844Z,1528914239.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:00.246Z,1528914240.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:00.647Z,1528914240.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:01.056Z,1528914241.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:01.452Z,1528914241.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:01.855Z,1528914241.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:02.255Z,1528914242.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:02.656Z,1528914242.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:03.050Z,1528914243.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:03.452Z,1528914243.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:03.847Z,1528914243.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:04.256Z,1528914244.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:04.659Z,1528914244.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:05.060Z,1528914245.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:05.460Z,1528914245.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:05.856Z,1528914245.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:06.248Z,1528914246.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:06.660Z,1528914246.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:07.059Z,1528914247.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:07.460Z,1528914247.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:07.851Z,1528914247.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:08.251Z,1528914248.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:08.660Z,1528914248.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:09.058Z,1528914249.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:09.457Z,1528914249.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:09.852Z,1528914249.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:10.257Z,1528914250.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:10.661Z,1528914250.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:11.061Z,1528914251.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:11.464Z,1528914251.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:11.860Z,1528914251.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:12.256Z,1528914252.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:12.664Z,1528914252.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:13.068Z,1528914253.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:13.459Z,1528914253.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:13.853Z,1528914253.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:14.261Z,1528914254.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:14.660Z,1528914254.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:15.072Z,1528914255.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:15.466Z,1528914255.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:15.857Z,1528914255.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:16.252Z,1528914256.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:16.666Z,1528914256.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:17.063Z,1528914257.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:17.465Z,1528914257.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:17.855Z,1528914257.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:18.256Z,1528914258.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:18.661Z,1528914258.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:19.065Z,1528914259.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:19.458Z,1528914259.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:19.853Z,1528914259.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:20.253Z,1528914260.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:20.664Z,1528914260.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:21.064Z,1528914261.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:21.465Z,1528914261.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:21.857Z,1528914261.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:22.250Z,1528914262.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:22.681Z,1528914262.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:23.061Z,1528914263.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:23.461Z,1528914263.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:23.855Z,1528914263.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:24.248Z,1528914264.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:24.664Z,1528914264.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:25.065Z,1528914265.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:25.458Z,1528914265.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:25.854Z,1528914265.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:26.255Z,1528914266.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:26.659Z,1528914266.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:27.065Z,1528914267.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:27.463Z,1528914267.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:27.853Z,1528914267.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:28.264Z,1528914268.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:28.669Z,1528914268.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:29.067Z,1528914269.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:29.468Z,1528914269.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:29.845Z,1528914269.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:30.244Z,1528914270.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:30.671Z,1528914270.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:31.075Z,1528914271.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:31.460Z,1528914271.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:31.852Z,1528914271.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:32.248Z,1528914272.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:32.655Z,1528914272.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:33.054Z,1528914273.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:36.205Z,1528914276.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:36.391Z,1528914276.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:36.784Z,1528914276.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:37.185Z,1528914277.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:37.588Z,1528914277.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:37.998Z,1528914277.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:38.396Z,1528914278.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:38.790Z,1528914278.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:39.195Z,1528914279.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:39.582Z,1528914279.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:39.970Z,1528914279.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:40.369Z,1528914280.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:40.795Z,1528914280.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:41.196Z,1528914281.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:41.590Z,1528914281.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:41.971Z,1528914281.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:42.396Z,1528914282.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:42.772Z,1528914282.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:43.173Z,1528914283.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:43.576Z,1528914283.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:43.999Z,1528914283.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:44.399Z,1528914284.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:44.796Z,1528914284.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:45.171Z,1528914285.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:45.599Z,1528914285.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:45.997Z,1528914285.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:46.373Z,1528914286.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:46.800Z,1528914286.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:47.203Z,1528914287.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:47.599Z,1528914287.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:47.973Z,1528914287.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:48.372Z,1528914288.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:48.797Z,1528914288.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:49.198Z,1528914289.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:49.571Z,1528914289.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:49.000Z,1528914290.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:50.408Z,1528914290.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:50.798Z,1528914290.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:51.173Z,1528914291.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:51.575Z,1528914291.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:51.970Z,1528914291.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:52.370Z,1528914292.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:52.784Z,1528914292.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:53.206Z,1528914293.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:53.603Z,1528914293.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:53.972Z,1528914293.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:54.368Z,1528914294.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:54.775Z,1528914294.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:55.174Z,1528914295.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:55.570Z,1528914295.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:55.976Z,1528914295.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:56.384Z,1528914296.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:56.780Z,1528914296.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:57.171Z,1528914297.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:57.571Z,1528914297.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:57.972Z,1528914297.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:58.371Z,1528914298.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:58.779Z,1528914298.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:59.177Z,1528914299.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:59.581Z,1528914299.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:24:59.972Z,1528914299.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:00.368Z,1528914300.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:00.771Z,1528914300.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:01.175Z,1528914301.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:01.572Z,1528914301.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:01.984Z,1528914301.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:02.379Z,1528914302.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:02.779Z,1528914302.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:03.171Z,1528914303.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:03.572Z,1528914303.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:03.971Z,1528914303.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:04.382Z,1528914304.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:04.778Z,1528914304.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:05.181Z,1528914305.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:05.580Z,1528914305.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:05.967Z,1528914305.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:06.380Z,1528914306.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:06.778Z,1528914306.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:07.175Z,1528914307.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:07.580Z,1528914307.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:07.984Z,1528914307.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:08.385Z,1528914308.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:08.779Z,1528914308.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:09.180Z,1528914309.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:09.580Z,1528914309.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:09.970Z,1528914309.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:10.374Z,1528914310.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:10.787Z,1528914310.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:11.180Z,1528914311.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:11.585Z,1528914311.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:11.974Z,1528914311.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:12.377Z,1528914312.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:12.772Z,1528914312.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:13.179Z,1528914313.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:13.581Z,1528914313.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:13.982Z,1528914313.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:14.386Z,1528914314.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:14.782Z,1528914314.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:15.180Z,1528914315.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:15.591Z,1528914315.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:15.984Z,1528914315.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:16.364Z,1528914316.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:16.796Z,1528914316.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:17.190Z,1528914317.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:17.590Z,1528914317.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:17.964Z,1528914317.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:18.385Z,1528914318.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:18.768Z,1528914318.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:19.168Z,1528914319.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:19.567Z,1528914319.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:19.995Z,1528914319.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:20.379Z,1528914320.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:20.775Z,1528914320.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:21.172Z,1528914321.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:21.572Z,1528914321.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:21.970Z,1528914321.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:22.372Z,1528914322.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:22.777Z,1528914322.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:23.179Z,1528914323.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:23.575Z,1528914323.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:23.971Z,1528914323.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:24.370Z,1528914324.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:24.779Z,1528914324.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:25.184Z,1528914325.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:25.580Z,1528914325.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:25.971Z,1528914325.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:26.371Z,1528914326.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:26.780Z,1528914326.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:27.179Z,1528914327.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:27.584Z,1528914327.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:27.976Z,1528914327.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:28.370Z,1528914328.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:28.779Z,1528914328.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:29.179Z,1528914329.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:29.580Z,1528914329.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:29.973Z,1528914329.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:30.370Z,1528914330.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:30.775Z,1528914330.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:31.179Z,1528914331.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:31.580Z,1528914331.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:31.972Z,1528914331.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:32.371Z,1528914332.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:32.779Z,1528914332.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:32.782Z,1528914332.782 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T18:25:32.782Z,1528914332.782 [Default:CheckIn:C.Wait] Stopped
2018-06-13T18:25:32.782Z,1528914332.782 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T18:25:32.782Z,1528914332.782 [Default:CheckIn:D] Running Loop=1
2018-06-13T18:25:33.182Z,1528914333.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:33.186Z,1528914333.186 [Default:CheckIn:D] Stopped
2018-06-13T18:25:33.186Z,1528914333.186 [Default:CheckIn:E] Running Loop=1
2018-06-13T18:25:36.316Z,1528914336.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:36.320Z,1528914336.320 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 898.329036 min 
2018-06-13T18:25:36.320Z,1528914336.320 [Default:CheckIn:E] Stopped
2018-06-13T18:25:36.320Z,1528914336.320 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T18:25:36.320Z,1528914336.320 [Default:CheckIn] Stopped
2018-06-13T18:25:36.325Z,1528914336.325 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T18:25:36.325Z,1528914336.325 [Default:CheckIn](INFO): Running loop #87
2018-06-13T18:25:36.325Z,1528914336.325 [Default:CheckIn] Running Loop=87
2018-06-13T18:25:36.325Z,1528914336.325 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T18:25:36.325Z,1528914336.325 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T18:25:36.469Z,1528914336.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:36.871Z,1528914336.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:37.272Z,1528914337.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:37.670Z,1528914337.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:38.080Z,1528914338.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:38.485Z,1528914338.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:38.892Z,1528914338.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:39.272Z,1528914339.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:39.672Z,1528914339.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:40.075Z,1528914340.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:40.474Z,1528914340.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:40.877Z,1528914340.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:41.275Z,1528914341.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:41.688Z,1528914341.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:42.078Z,1528914342.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:42.474Z,1528914342.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:42.879Z,1528914342.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:43.280Z,1528914343.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:43.652Z,1528914343.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:44.076Z,1528914344.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:44.478Z,1528914344.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:44.883Z,1528914344.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:45.256Z,1528914345.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:45.685Z,1528914345.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:46.078Z,1528914346.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:46.485Z,1528914346.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:46.889Z,1528914346.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:47.281Z,1528914347.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:47.684Z,1528914347.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:48.089Z,1528914348.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:48.460Z,1528914348.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:48.864Z,1528914348.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:49.268Z,1528914349.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:49.656Z,1528914349.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:50.067Z,1528914350.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:50.472Z,1528914350.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:50.868Z,1528914350.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:51.258Z,1528914351.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:51.660Z,1528914351.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:52.060Z,1528914352.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:52.464Z,1528914352.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:52.872Z,1528914352.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:53.263Z,1528914353.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:53.697Z,1528914353.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:54.066Z,1528914354.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:54.456Z,1528914354.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:54.860Z,1528914354.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:55.261Z,1528914355.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:55.659Z,1528914355.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:56.068Z,1528914356.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:56.468Z,1528914356.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:56.869Z,1528914356.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:57.263Z,1528914357.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:57.660Z,1528914357.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:58.064Z,1528914358.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:58.459Z,1528914358.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:58.874Z,1528914358.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:59.272Z,1528914359.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:25:59.667Z,1528914359.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:00.059Z,1528914360.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:00.458Z,1528914360.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:00.859Z,1528914360.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:01.260Z,1528914361.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:01.664Z,1528914361.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:02.070Z,1528914362.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:02.468Z,1528914362.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:02.864Z,1528914362.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:03.260Z,1528914363.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:03.660Z,1528914363.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:04.064Z,1528914364.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:04.458Z,1528914364.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:04.873Z,1528914364.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:05.282Z,1528914365.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:05.668Z,1528914365.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:06.065Z,1528914366.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:06.456Z,1528914366.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:06.860Z,1528914366.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:07.261Z,1528914367.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:07.656Z,1528914367.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:08.069Z,1528914368.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:08.473Z,1528914368.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:08.868Z,1528914368.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:09.260Z,1528914369.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:09.660Z,1528914369.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:10.057Z,1528914370.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:10.459Z,1528914370.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:10.869Z,1528914370.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:11.268Z,1528914371.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:11.670Z,1528914371.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:12.073Z,1528914372.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:12.466Z,1528914372.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:12.868Z,1528914372.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:13.266Z,1528914373.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:13.664Z,1528914373.664 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:13.664Z,1528914373.664 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 299
2018-06-13T18:26:13.664Z,1528914373.664 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:26:13.666Z,1528914373.666 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:13.666Z,1528914373.666 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 299
2018-06-13T18:26:13.666Z,1528914373.666 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:26:13.668Z,1528914373.668 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:13.668Z,1528914373.668 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 299
2018-06-13T18:26:13.668Z,1528914373.668 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:26:13.745Z,1528914373.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:26:13.745Z,1528914373.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:26:13.746Z,1528914373.746 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:26:14.153Z,1528914374.153 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:26:14.153Z,1528914374.153 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 299
2018-06-13T18:26:14.154Z,1528914374.154 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:26:14.154Z,1528914374.154 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 299
2018-06-13T18:26:14.154Z,1528914374.154 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:26:14.154Z,1528914374.154 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 299
2018-06-13T18:26:14.473Z,1528914374.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:26:14.474Z,1528914374.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:26:14.474Z,1528914374.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:26:14.475Z,1528914374.475 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:26:14.475Z,1528914374.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:26:14.475Z,1528914374.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:26:14.476Z,1528914374.476 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:26:14.476Z,1528914374.476 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:26:14.476Z,1528914374.476 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:26:14.875Z,1528914374.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:26:14.876Z,1528914374.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:15.255Z,1528914375.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:26:15.256Z,1528914375.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:15.657Z,1528914375.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:26:15.658Z,1528914375.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:16.060Z,1528914376.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:26:16.061Z,1528914376.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:16.455Z,1528914376.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:26:16.456Z,1528914376.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:16.867Z,1528914376.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:26:16.868Z,1528914376.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:17.268Z,1528914377.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:26:17.269Z,1528914377.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:17.664Z,1528914377.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:26:17.665Z,1528914377.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:18.059Z,1528914378.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:26:18.060Z,1528914378.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:18.464Z,1528914378.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:26:18.465Z,1528914378.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:18.859Z,1528914378.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:26:18.860Z,1528914378.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:19.261Z,1528914379.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:26:19.262Z,1528914379.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:19.656Z,1528914379.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:26:19.657Z,1528914379.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:20.068Z,1528914380.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:26:20.069Z,1528914380.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:20.471Z,1528914380.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:26:20.471Z,1528914380.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:20.864Z,1528914380.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:26:20.865Z,1528914380.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:21.259Z,1528914381.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:26:21.260Z,1528914381.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:21.659Z,1528914381.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:26:21.660Z,1528914381.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:22.056Z,1528914382.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:26:22.057Z,1528914382.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:22.460Z,1528914382.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:26:22.461Z,1528914382.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:22.876Z,1528914382.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:26:22.893Z,1528914382.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:23.272Z,1528914383.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:26:23.273Z,1528914383.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:23.667Z,1528914383.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T18:26:23.668Z,1528914383.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:24.066Z,1528914384.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:26:24.067Z,1528914384.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:24.456Z,1528914384.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:26:24.457Z,1528914384.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:24.868Z,1528914384.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T18:26:24.869Z,1528914384.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:25.270Z,1528914385.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:26:25.270Z,1528914385.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:25.672Z,1528914385.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:26:25.673Z,1528914385.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:26.059Z,1528914386.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:26:26.060Z,1528914386.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:26.463Z,1528914386.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:26:26.464Z,1528914386.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:26.869Z,1528914386.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:26:26.870Z,1528914386.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:27.272Z,1528914387.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:26:27.273Z,1528914387.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:27.673Z,1528914387.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:26:27.674Z,1528914387.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:28.060Z,1528914388.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:26:28.061Z,1528914388.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:28.468Z,1528914388.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T18:26:28.469Z,1528914388.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:28.873Z,1528914388.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:26:28.874Z,1528914388.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:29.271Z,1528914389.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:26:29.272Z,1528914389.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:29.676Z,1528914389.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:26:29.677Z,1528914389.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:30.070Z,1528914390.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:26:30.071Z,1528914390.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:30.462Z,1528914390.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:26:30.463Z,1528914390.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:30.876Z,1528914390.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:26:30.877Z,1528914390.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:31.275Z,1528914391.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:26:31.276Z,1528914391.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:31.676Z,1528914391.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:26:31.677Z,1528914391.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:32.065Z,1528914392.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:26:32.066Z,1528914392.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:32.469Z,1528914392.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:26:32.470Z,1528914392.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:32.874Z,1528914392.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T18:26:32.875Z,1528914392.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:33.280Z,1528914393.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T18:26:33.282Z,1528914393.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:36.383Z,1528914396.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:36.523Z,1528914396.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:36.918Z,1528914396.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:37.327Z,1528914397.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:37.720Z,1528914397.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:38.132Z,1528914398.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:38.527Z,1528914398.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:38.933Z,1528914398.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:39.319Z,1528914399.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:39.721Z,1528914399.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:40.120Z,1528914400.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:40.518Z,1528914400.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:40.934Z,1528914400.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:41.327Z,1528914401.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:41.727Z,1528914401.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:42.114Z,1528914402.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:42.500Z,1528914402.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:42.908Z,1528914402.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:43.308Z,1528914403.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:43.708Z,1528914403.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:44.137Z,1528914404.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:44.538Z,1528914404.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:44.936Z,1528914404.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:45.307Z,1528914405.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:45.712Z,1528914405.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:46.106Z,1528914406.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:46.585Z,1528914406.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:46.946Z,1528914406.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:47.315Z,1528914407.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:47.723Z,1528914407.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:48.111Z,1528914408.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:48.508Z,1528914408.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:48.921Z,1528914408.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:49.313Z,1528914409.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:49.712Z,1528914409.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:50.120Z,1528914410.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:50.528Z,1528914410.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:50.924Z,1528914410.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:51.312Z,1528914411.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:51.717Z,1528914411.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:52.111Z,1528914412.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:52.512Z,1528914412.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:52.928Z,1528914412.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:53.328Z,1528914413.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:53.729Z,1528914413.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:54.112Z,1528914414.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:54.512Z,1528914414.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:54.912Z,1528914414.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:55.320Z,1528914415.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:55.712Z,1528914415.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:56.121Z,1528914416.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:56.526Z,1528914416.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:56.917Z,1528914416.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:57.312Z,1528914417.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:57.722Z,1528914417.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:58.117Z,1528914418.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:58.512Z,1528914418.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:58.926Z,1528914418.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:59.325Z,1528914419.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:26:59.732Z,1528914419.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:00.116Z,1528914420.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:00.513Z,1528914420.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:00.928Z,1528914420.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:01.338Z,1528914421.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:01.728Z,1528914421.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:02.112Z,1528914422.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:02.515Z,1528914422.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:02.928Z,1528914422.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:03.326Z,1528914423.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:03.735Z,1528914423.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:04.113Z,1528914424.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:04.512Z,1528914424.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:04.928Z,1528914424.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:05.323Z,1528914425.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:05.725Z,1528914425.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:06.119Z,1528914426.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:06.524Z,1528914426.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:06.930Z,1528914426.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:07.337Z,1528914427.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:07.732Z,1528914427.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:08.106Z,1528914428.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:08.508Z,1528914428.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:08.931Z,1528914428.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:09.336Z,1528914429.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:09.738Z,1528914429.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:10.113Z,1528914430.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:10.512Z,1528914430.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:10.939Z,1528914430.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:11.336Z,1528914431.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:11.739Z,1528914431.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:12.110Z,1528914432.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:12.508Z,1528914432.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:12.943Z,1528914432.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:13.324Z,1528914433.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:13.717Z,1528914433.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:14.123Z,1528914434.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:14.513Z,1528914434.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:14.918Z,1528914434.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:15.324Z,1528914435.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:15.720Z,1528914435.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:16.108Z,1528914436.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:16.528Z,1528914436.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:16.926Z,1528914436.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:17.328Z,1528914437.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:17.726Z,1528914437.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:18.112Z,1528914438.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:18.509Z,1528914438.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:18.929Z,1528914438.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:19.324Z,1528914439.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:19.728Z,1528914439.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:20.114Z,1528914440.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:20.511Z,1528914440.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:20.917Z,1528914440.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:21.323Z,1528914441.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:21.725Z,1528914441.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:22.111Z,1528914442.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:22.521Z,1528914442.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:22.921Z,1528914442.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:23.329Z,1528914443.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:23.724Z,1528914443.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:24.115Z,1528914444.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:24.509Z,1528914444.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:24.922Z,1528914444.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:25.321Z,1528914445.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:25.728Z,1528914445.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:26.112Z,1528914446.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:26.525Z,1528914446.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:26.921Z,1528914446.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:27.325Z,1528914447.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:27.725Z,1528914447.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:28.113Z,1528914448.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:28.512Z,1528914448.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:28.932Z,1528914448.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:29.322Z,1528914449.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:29.724Z,1528914449.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:30.115Z,1528914450.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:30.512Z,1528914450.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:30.921Z,1528914450.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:31.326Z,1528914451.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:31.728Z,1528914451.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:32.116Z,1528914452.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:32.510Z,1528914452.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:32.874Z,1528914452.874 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T18:27:32.875Z,1528914452.875 [NAL9602] Data Fault, FailCount= 2
2018-06-13T18:27:32.875Z,1528914452.875 [NAL9602](ERROR): Data Fault
2018-06-13T18:27:32.926Z,1528914452.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:33.001Z,1528914453.001 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T18:27:33.270Z,1528914453.270 [NAL9602](INFO): Powering down
2018-06-13T18:27:33.329Z,1528914453.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:33.714Z,1528914453.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:34.120Z,1528914454.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:34.198Z,1528914454.198 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T18:27:34.198Z,1528914454.198 [NAL9602] No Fault, FailCount= 2
2018-06-13T18:27:34.511Z,1528914454.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:34.913Z,1528914454.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:35.320Z,1528914455.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:35.716Z,1528914455.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:36.114Z,1528914456.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:36.514Z,1528914456.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:36.914Z,1528914456.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:40.024Z,1528914460.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:40.203Z,1528914460.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:40.563Z,1528914460.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:40.965Z,1528914460.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:41.358Z,1528914461.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:41.759Z,1528914461.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:42.161Z,1528914462.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:42.559Z,1528914462.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:42.961Z,1528914462.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:43.361Z,1528914463.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:43.760Z,1528914463.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:44.159Z,1528914464.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:44.563Z,1528914464.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:44.964Z,1528914464.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:45.359Z,1528914465.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:45.763Z,1528914465.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:46.159Z,1528914466.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:46.559Z,1528914466.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:46.961Z,1528914466.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:47.359Z,1528914467.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:47.761Z,1528914467.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:48.160Z,1528914468.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:48.560Z,1528914468.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:48.959Z,1528914468.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:49.361Z,1528914469.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:49.768Z,1528914469.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:50.159Z,1528914470.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:50.561Z,1528914470.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:50.959Z,1528914470.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:51.358Z,1528914471.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:51.761Z,1528914471.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:52.160Z,1528914472.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:52.568Z,1528914472.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:52.960Z,1528914472.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:53.360Z,1528914473.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:53.758Z,1528914473.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:54.160Z,1528914474.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:54.560Z,1528914474.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:54.959Z,1528914474.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:55.362Z,1528914475.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:55.764Z,1528914475.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:56.164Z,1528914476.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:56.567Z,1528914476.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:56.961Z,1528914476.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:57.366Z,1528914477.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:57.763Z,1528914477.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:58.167Z,1528914478.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:58.562Z,1528914478.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:58.964Z,1528914478.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:59.365Z,1528914479.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:27:59.767Z,1528914479.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:00.169Z,1528914480.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:00.557Z,1528914480.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:00.948Z,1528914480.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:01.352Z,1528914481.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:01.752Z,1528914481.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:02.156Z,1528914482.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:02.555Z,1528914482.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:02.949Z,1528914482.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:03.322Z,1528914483.322 [NAL9602](INFO): Powering up NAL9602
2018-06-13T18:28:03.357Z,1528914483.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:03.754Z,1528914483.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:04.151Z,1528914484.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:04.555Z,1528914484.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:04.955Z,1528914484.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:05.353Z,1528914485.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:05.758Z,1528914485.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:06.157Z,1528914486.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:06.558Z,1528914486.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:06.955Z,1528914486.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:07.356Z,1528914487.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:07.758Z,1528914487.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:08.159Z,1528914488.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:08.560Z,1528914488.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:08.955Z,1528914488.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:09.358Z,1528914489.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:09.757Z,1528914489.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:10.154Z,1528914490.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:10.558Z,1528914490.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:10.957Z,1528914490.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:11.357Z,1528914491.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:11.758Z,1528914491.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:12.156Z,1528914492.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:12.553Z,1528914492.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:12.958Z,1528914492.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:13.358Z,1528914493.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:13.759Z,1528914493.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:14.163Z,1528914494.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:14.518Z,1528914494.518 [NAL9602](INFO): NAL9602 initialized
2018-06-13T18:28:14.562Z,1528914494.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:14.957Z,1528914494.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:15.363Z,1528914495.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:15.767Z,1528914495.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:16.168Z,1528914496.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:16.559Z,1528914496.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:16.957Z,1528914496.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:17.358Z,1528914497.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:17.759Z,1528914497.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:18.163Z,1528914498.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:18.566Z,1528914498.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:18.967Z,1528914498.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:19.364Z,1528914499.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:19.757Z,1528914499.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:20.158Z,1528914500.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:20.560Z,1528914500.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:20.957Z,1528914500.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:21.367Z,1528914501.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:21.767Z,1528914501.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:22.159Z,1528914502.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:22.559Z,1528914502.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:22.958Z,1528914502.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:23.355Z,1528914503.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:23.758Z,1528914503.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:24.163Z,1528914504.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:24.563Z,1528914504.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:24.967Z,1528914504.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:25.360Z,1528914505.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:25.754Z,1528914505.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:26.159Z,1528914506.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:26.558Z,1528914506.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:26.957Z,1528914506.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:27.367Z,1528914507.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:27.767Z,1528914507.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:28.160Z,1528914508.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:28.559Z,1528914508.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:28.964Z,1528914508.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:29.359Z,1528914509.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:29.758Z,1528914509.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:30.164Z,1528914510.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:30.563Z,1528914510.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:30.967Z,1528914510.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:31.370Z,1528914511.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:31.758Z,1528914511.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:32.160Z,1528914512.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:32.562Z,1528914512.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:32.958Z,1528914512.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:33.372Z,1528914513.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:36.504Z,1528914516.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:36.692Z,1528914516.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:37.052Z,1528914517.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:37.451Z,1528914517.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:37.828Z,1528914517.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:38.259Z,1528914518.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:38.668Z,1528914518.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:39.063Z,1528914519.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:39.437Z,1528914519.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:39.836Z,1528914519.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:40.237Z,1528914520.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:40.637Z,1528914520.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:41.066Z,1528914521.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:41.455Z,1528914521.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:41.859Z,1528914521.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:42.242Z,1528914522.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:42.636Z,1528914522.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:43.047Z,1528914523.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:43.443Z,1528914523.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:43.841Z,1528914523.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:44.242Z,1528914524.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:44.640Z,1528914524.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:45.043Z,1528914525.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:45.447Z,1528914525.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:45.847Z,1528914525.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:46.248Z,1528914526.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:46.643Z,1528914526.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:47.072Z,1528914527.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:47.445Z,1528914527.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:47.848Z,1528914527.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:48.254Z,1528914528.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:48.635Z,1528914528.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:49.049Z,1528914529.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:49.448Z,1528914529.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:49.844Z,1528914529.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:50.251Z,1528914530.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:50.639Z,1528914530.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:51.044Z,1528914531.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:51.446Z,1528914531.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:51.847Z,1528914531.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:52.240Z,1528914532.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:52.648Z,1528914532.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:53.047Z,1528914533.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:53.447Z,1528914533.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:53.850Z,1528914533.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:54.239Z,1528914534.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:54.636Z,1528914534.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:55.046Z,1528914535.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:55.452Z,1528914535.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:55.856Z,1528914535.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:56.256Z,1528914536.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:56.640Z,1528914536.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:57.035Z,1528914537.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:57.441Z,1528914537.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:57.847Z,1528914537.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:58.244Z,1528914538.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:58.648Z,1528914538.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:59.051Z,1528914539.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:59.444Z,1528914539.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:28:59.841Z,1528914539.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:00.240Z,1528914540.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:00.640Z,1528914540.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:01.042Z,1528914541.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:01.452Z,1528914541.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:01.849Z,1528914541.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:02.259Z,1528914542.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:02.643Z,1528914542.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:03.042Z,1528914543.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:03.444Z,1528914543.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:03.843Z,1528914543.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:04.246Z,1528914544.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:04.656Z,1528914544.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:05.053Z,1528914545.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:05.441Z,1528914545.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:05.853Z,1528914545.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:06.252Z,1528914546.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:06.638Z,1528914546.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:07.042Z,1528914547.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:07.454Z,1528914547.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:07.848Z,1528914547.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:08.260Z,1528914548.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:08.651Z,1528914548.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:09.036Z,1528914549.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:09.447Z,1528914549.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:09.848Z,1528914549.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:10.247Z,1528914550.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:10.660Z,1528914550.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:11.052Z,1528914551.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:11.437Z,1528914551.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:11.850Z,1528914551.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:12.246Z,1528914552.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:12.646Z,1528914552.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:13.045Z,1528914553.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:13.457Z,1528914553.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:13.859Z,1528914553.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:14.263Z,1528914554.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:14.636Z,1528914554.636 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:14.637Z,1528914554.637 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 300
2018-06-13T18:29:14.637Z,1528914554.637 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:29:14.639Z,1528914554.639 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:14.639Z,1528914554.639 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 300
2018-06-13T18:29:14.639Z,1528914554.639 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:29:14.640Z,1528914554.640 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:14.641Z,1528914554.641 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 300
2018-06-13T18:29:14.641Z,1528914554.641 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:29:14.737Z,1528914554.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:29:14.737Z,1528914554.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:29:14.738Z,1528914554.738 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:29:15.113Z,1528914555.113 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:29:15.113Z,1528914555.113 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 300
2018-06-13T18:29:15.114Z,1528914555.114 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:29:15.114Z,1528914555.114 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 300
2018-06-13T18:29:15.114Z,1528914555.114 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:29:15.114Z,1528914555.114 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 300
2018-06-13T18:29:15.438Z,1528914555.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:29:15.439Z,1528914555.439 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:29:15.439Z,1528914555.439 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:29:15.439Z,1528914555.439 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:29:15.440Z,1528914555.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:29:15.440Z,1528914555.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:29:15.441Z,1528914555.441 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:29:15.441Z,1528914555.441 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:29:15.441Z,1528914555.441 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:29:15.847Z,1528914555.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:29:15.848Z,1528914555.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:16.244Z,1528914556.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:29:16.246Z,1528914556.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:16.656Z,1528914556.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:29:16.656Z,1528914556.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:17.048Z,1528914557.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:29:17.049Z,1528914557.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:17.434Z,1528914557.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:29:17.435Z,1528914557.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:17.841Z,1528914557.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:29:17.842Z,1528914557.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:18.239Z,1528914558.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:29:18.240Z,1528914558.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:18.637Z,1528914558.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:29:18.638Z,1528914558.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:19.042Z,1528914559.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:29:19.043Z,1528914559.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:19.456Z,1528914559.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:29:19.473Z,1528914559.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:19.848Z,1528914559.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:29:19.849Z,1528914559.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:20.256Z,1528914560.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:29:20.257Z,1528914560.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:20.639Z,1528914560.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:29:20.640Z,1528914560.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:21.039Z,1528914561.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:29:21.040Z,1528914561.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:21.442Z,1528914561.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:29:21.443Z,1528914561.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:21.854Z,1528914561.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:29:21.854Z,1528914561.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:22.249Z,1528914562.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:29:22.250Z,1528914562.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:22.654Z,1528914562.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:29:22.655Z,1528914562.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:23.053Z,1528914563.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:29:23.054Z,1528914563.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:23.440Z,1528914563.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:29:23.441Z,1528914563.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:23.858Z,1528914563.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:29:23.859Z,1528914563.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:24.243Z,1528914564.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:29:24.244Z,1528914564.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:24.642Z,1528914564.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T18:29:24.642Z,1528914564.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:25.049Z,1528914565.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:29:25.050Z,1528914565.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:25.455Z,1528914565.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:29:25.456Z,1528914565.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:25.855Z,1528914565.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T18:29:25.856Z,1528914565.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:26.256Z,1528914566.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:29:26.257Z,1528914566.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:26.650Z,1528914566.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:29:26.650Z,1528914566.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:27.040Z,1528914567.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:29:27.042Z,1528914567.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:27.454Z,1528914567.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:29:27.455Z,1528914567.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:27.837Z,1528914567.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:29:27.838Z,1528914567.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:28.260Z,1528914568.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:29:28.261Z,1528914568.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:28.668Z,1528914568.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:29:28.673Z,1528914568.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:29.059Z,1528914569.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:29:29.060Z,1528914569.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:29.431Z,1528914569.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T18:29:29.432Z,1528914569.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:29.856Z,1528914569.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:29:29.861Z,1528914569.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:30.240Z,1528914570.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:29:30.257Z,1528914570.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:30.636Z,1528914570.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:29:30.637Z,1528914570.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:31.040Z,1528914571.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:29:31.041Z,1528914571.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:31.439Z,1528914571.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:29:31.440Z,1528914571.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:31.846Z,1528914571.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:29:31.847Z,1528914571.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:32.250Z,1528914572.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:29:32.251Z,1528914572.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:32.636Z,1528914572.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:29:32.637Z,1528914572.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:33.039Z,1528914573.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:29:33.040Z,1528914573.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:33.451Z,1528914573.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:29:33.452Z,1528914573.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:36.551Z,1528914576.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:36.729Z,1528914576.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:37.126Z,1528914577.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:37.523Z,1528914577.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:37.899Z,1528914577.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:38.300Z,1528914578.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:38.695Z,1528914578.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:39.095Z,1528914579.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:39.528Z,1528914579.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:39.903Z,1528914579.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:40.302Z,1528914580.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:40.698Z,1528914580.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:41.105Z,1528914581.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:41.495Z,1528914581.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:41.899Z,1528914581.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:42.308Z,1528914582.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:42.706Z,1528914582.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:43.108Z,1528914583.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:43.494Z,1528914583.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:43.895Z,1528914583.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:44.302Z,1528914584.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:44.699Z,1528914584.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:45.098Z,1528914585.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:45.507Z,1528914585.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:45.908Z,1528914585.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:46.304Z,1528914586.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:46.699Z,1528914586.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:47.098Z,1528914587.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:47.497Z,1528914587.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:47.899Z,1528914587.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:48.305Z,1528914588.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:48.712Z,1528914588.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:49.107Z,1528914589.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:49.498Z,1528914589.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:49.899Z,1528914589.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:50.299Z,1528914590.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:50.707Z,1528914590.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:51.095Z,1528914591.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:51.525Z,1528914591.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:51.903Z,1528914591.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:52.308Z,1528914592.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:52.699Z,1528914592.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:53.099Z,1528914593.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:53.499Z,1528914593.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:53.900Z,1528914593.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:54.303Z,1528914594.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:54.708Z,1528914594.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:55.107Z,1528914595.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:55.498Z,1528914595.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:55.899Z,1528914595.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:56.300Z,1528914596.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:56.699Z,1528914596.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:57.098Z,1528914597.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:57.507Z,1528914597.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:57.904Z,1528914597.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:58.308Z,1528914598.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:58.703Z,1528914598.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:59.098Z,1528914599.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:59.499Z,1528914599.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:29:59.900Z,1528914599.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:00.308Z,1528914600.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:00.707Z,1528914600.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:01.107Z,1528914601.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:01.498Z,1528914601.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:01.898Z,1528914601.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:02.304Z,1528914602.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:02.700Z,1528914602.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:03.098Z,1528914603.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:03.516Z,1528914603.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:03.912Z,1528914603.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:04.312Z,1528914604.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:04.700Z,1528914604.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:05.100Z,1528914605.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:05.504Z,1528914605.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:05.900Z,1528914605.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:06.306Z,1528914606.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:06.709Z,1528914606.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:07.110Z,1528914607.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:07.506Z,1528914607.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:07.897Z,1528914607.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:08.301Z,1528914608.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:08.701Z,1528914608.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:09.097Z,1528914609.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:09.515Z,1528914609.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:09.913Z,1528914609.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:10.310Z,1528914610.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:10.709Z,1528914610.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:11.108Z,1528914611.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:11.498Z,1528914611.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:11.904Z,1528914611.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:12.314Z,1528914612.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:12.709Z,1528914612.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:13.113Z,1528914613.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:13.511Z,1528914613.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:13.896Z,1528914613.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:14.302Z,1528914614.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:14.715Z,1528914614.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:15.096Z,1528914615.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:15.520Z,1528914615.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:15.913Z,1528914615.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:16.304Z,1528914616.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:16.701Z,1528914616.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:17.109Z,1528914617.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:17.504Z,1528914617.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:17.910Z,1528914617.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:18.313Z,1528914618.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:18.713Z,1528914618.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:19.115Z,1528914619.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:19.512Z,1528914619.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:19.889Z,1528914619.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:20.292Z,1528914620.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:20.693Z,1528914620.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:21.092Z,1528914621.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:21.528Z,1528914621.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:21.921Z,1528914621.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:22.322Z,1528914622.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:22.705Z,1528914622.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:23.092Z,1528914623.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:23.494Z,1528914623.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:23.896Z,1528914623.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:24.324Z,1528914624.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:24.703Z,1528914624.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:25.107Z,1528914625.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:25.497Z,1528914625.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:25.894Z,1528914625.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:26.304Z,1528914626.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:26.699Z,1528914626.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:27.094Z,1528914627.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:27.507Z,1528914627.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:27.907Z,1528914627.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:28.299Z,1528914628.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:28.700Z,1528914628.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:29.097Z,1528914629.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:29.495Z,1528914629.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:29.898Z,1528914629.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:30.303Z,1528914630.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:30.703Z,1528914630.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:31.107Z,1528914631.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:31.503Z,1528914631.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:31.894Z,1528914631.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:32.298Z,1528914632.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:32.699Z,1528914632.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:33.097Z,1528914633.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:33.507Z,1528914633.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:36.629Z,1528914636.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:36.632Z,1528914636.632 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T18:25:36.3Z
2018-06-13T18:30:36.632Z,1528914636.632 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T18:30:36.633Z,1528914636.633 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T18:30:36.796Z,1528914636.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:37.937Z,1528914637.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:38.094Z,1528914638.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:38.493Z,1528914638.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:38.898Z,1528914638.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:42.003Z,1528914642.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:42.105Z,1528914642.105 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0348.lzma
2018-06-13T18:30:42.193Z,1528914642.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:42.553Z,1528914642.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:42.906Z,1528914642.906 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0348.lzma.bak
2018-06-13T18:30:42.906Z,1528914642.906 [DataOverHttps](INFO): SBD MOMSN=8329717
2018-06-13T18:30:42.981Z,1528914642.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:44.892Z,1528914644.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:45.052Z,1528914645.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:45.448Z,1528914645.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:45.838Z,1528914645.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:46.233Z,1528914646.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:49.385Z,1528914649.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:49.539Z,1528914649.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:49.942Z,1528914649.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:50.343Z,1528914650.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:50.742Z,1528914650.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:51.144Z,1528914651.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:51.539Z,1528914651.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:51.937Z,1528914651.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:52.347Z,1528914652.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:52.750Z,1528914652.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:53.144Z,1528914653.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:53.524Z,1528914653.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:53.926Z,1528914653.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:54.328Z,1528914654.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:54.728Z,1528914654.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:57.873Z,1528914657.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:57.992Z,1528914657.992 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0349.lzma
2018-06-13T18:30:58.060Z,1528914658.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:58.456Z,1528914658.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:30:58.788Z,1528914658.788 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0349.lzma.bak
2018-06-13T18:30:58.788Z,1528914658.788 [DataOverHttps](INFO): SBD MOMSN=8329719
2018-06-13T18:30:58.879Z,1528914658.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:00.755Z,1528914660.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:00.758Z,1528914660.758 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T18:31:00.758Z,1528914660.758 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T18:31:00.758Z,1528914660.758 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T18:31:00.911Z,1528914660.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:04.035Z,1528914664.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:04.209Z,1528914664.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:04.620Z,1528914664.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:05.004Z,1528914665.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:05.407Z,1528914665.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:05.815Z,1528914665.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:06.217Z,1528914666.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:06.611Z,1528914666.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:07.013Z,1528914667.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:07.414Z,1528914667.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:07.814Z,1528914667.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:08.192Z,1528914668.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:08.613Z,1528914668.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:08.994Z,1528914668.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:09.421Z,1528914669.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:09.823Z,1528914669.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:10.220Z,1528914670.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:10.595Z,1528914670.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:10.996Z,1528914670.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:11.396Z,1528914671.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:11.798Z,1528914671.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:12.194Z,1528914672.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:12.598Z,1528914672.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:13.023Z,1528914673.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:13.406Z,1528914673.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:13.798Z,1528914673.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:14.201Z,1528914674.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:14.599Z,1528914674.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:15.022Z,1528914675.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:15.431Z,1528914675.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:15.805Z,1528914675.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:16.205Z,1528914676.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:16.710Z,1528914676.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:16.994Z,1528914676.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:17.461Z,1528914677.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:17.856Z,1528914677.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:18.261Z,1528914678.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:18.681Z,1528914678.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:19.010Z,1528914679.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:19.420Z,1528914679.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:19.810Z,1528914679.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:20.209Z,1528914680.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:20.609Z,1528914680.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:21.008Z,1528914681.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:21.414Z,1528914681.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:21.813Z,1528914681.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:22.223Z,1528914682.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:22.607Z,1528914682.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:23.011Z,1528914683.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:23.402Z,1528914683.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:23.810Z,1528914683.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:24.192Z,1528914684.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:24.622Z,1528914684.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:25.019Z,1528914685.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:25.419Z,1528914685.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:25.792Z,1528914685.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:26.223Z,1528914686.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:26.622Z,1528914686.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:27.013Z,1528914687.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:27.422Z,1528914687.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:27.822Z,1528914687.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:28.226Z,1528914688.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:28.598Z,1528914688.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:28.998Z,1528914688.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:29.420Z,1528914689.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:29.799Z,1528914689.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:30.199Z,1528914690.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:30.602Z,1528914690.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:31.031Z,1528914691.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:31.426Z,1528914691.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:31.799Z,1528914691.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:32.198Z,1528914692.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:32.604Z,1528914692.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:32.996Z,1528914692.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:33.404Z,1528914693.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:33.827Z,1528914693.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:34.227Z,1528914694.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:34.594Z,1528914694.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:34.999Z,1528914694.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:35.398Z,1528914695.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:35.794Z,1528914695.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:36.193Z,1528914696.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:36.621Z,1528914696.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:37.023Z,1528914697.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:37.429Z,1528914697.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:37.794Z,1528914697.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:38.194Z,1528914698.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:38.601Z,1528914698.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:39.000Z,1528914699.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:39.399Z,1528914699.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:39.832Z,1528914699.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:40.205Z,1528914700.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:40.601Z,1528914700.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:40.995Z,1528914700.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:41.394Z,1528914701.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:41.802Z,1528914701.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:42.197Z,1528914702.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:42.604Z,1528914702.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:43.004Z,1528914703.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:43.408Z,1528914703.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:43.794Z,1528914703.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:44.194Z,1528914704.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:44.595Z,1528914704.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:44.995Z,1528914704.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:45.401Z,1528914705.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:45.803Z,1528914705.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:46.216Z,1528914706.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:46.594Z,1528914706.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:46.998Z,1528914706.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:47.401Z,1528914707.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:47.795Z,1528914707.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:48.199Z,1528914708.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:48.605Z,1528914708.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:49.005Z,1528914709.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:49.406Z,1528914709.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:49.795Z,1528914709.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:50.196Z,1528914710.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:50.598Z,1528914710.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:51.004Z,1528914711.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:51.405Z,1528914711.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:51.805Z,1528914711.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:52.205Z,1528914712.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:52.597Z,1528914712.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:52.996Z,1528914712.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:53.393Z,1528914713.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:53.801Z,1528914713.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:54.216Z,1528914714.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:54.602Z,1528914714.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:55.014Z,1528914715.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:55.416Z,1528914715.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:55.799Z,1528914715.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:56.197Z,1528914716.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:56.600Z,1528914716.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:56.998Z,1528914716.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:57.412Z,1528914717.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:57.835Z,1528914717.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:58.204Z,1528914718.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:58.596Z,1528914718.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:59.002Z,1528914719.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:59.399Z,1528914719.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:31:59.798Z,1528914719.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:00.200Z,1528914720.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:00.603Z,1528914720.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:01.010Z,1528914721.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:01.412Z,1528914721.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:04.518Z,1528914724.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:04.670Z,1528914724.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:05.081Z,1528914725.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:05.471Z,1528914725.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:05.870Z,1528914725.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:06.267Z,1528914726.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:06.667Z,1528914726.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:07.064Z,1528914727.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:07.472Z,1528914727.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:07.878Z,1528914727.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:08.272Z,1528914728.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:08.665Z,1528914728.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:09.052Z,1528914729.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:09.448Z,1528914729.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:09.850Z,1528914729.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:10.257Z,1528914730.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:10.678Z,1528914730.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:11.091Z,1528914731.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:11.455Z,1528914731.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:11.855Z,1528914731.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:12.256Z,1528914732.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:12.653Z,1528914732.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:13.050Z,1528914733.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:13.464Z,1528914733.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:13.863Z,1528914733.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:14.286Z,1528914734.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:14.653Z,1528914734.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:15.048Z,1528914735.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:15.457Z,1528914735.457 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:15.457Z,1528914735.457 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 301
2018-06-13T18:32:15.457Z,1528914735.457 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:32:15.459Z,1528914735.459 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:15.459Z,1528914735.459 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 301
2018-06-13T18:32:15.459Z,1528914735.459 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:32:15.461Z,1528914735.461 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:15.461Z,1528914735.461 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 301
2018-06-13T18:32:15.461Z,1528914735.461 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:32:15.545Z,1528914735.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:32:15.545Z,1528914735.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:32:15.546Z,1528914735.546 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:32:15.937Z,1528914735.937 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:32:15.938Z,1528914735.938 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 301
2018-06-13T18:32:15.938Z,1528914735.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:32:15.938Z,1528914735.938 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 301
2018-06-13T18:32:15.939Z,1528914735.939 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:32:15.939Z,1528914735.939 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 301
2018-06-13T18:32:16.252Z,1528914736.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:32:16.253Z,1528914736.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:32:16.253Z,1528914736.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:32:16.254Z,1528914736.254 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:32:16.254Z,1528914736.254 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:32:16.254Z,1528914736.254 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:32:16.255Z,1528914736.255 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:32:16.255Z,1528914736.255 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:32:16.255Z,1528914736.255 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:32:16.674Z,1528914736.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:32:16.675Z,1528914736.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:17.070Z,1528914737.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:32:17.071Z,1528914737.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:17.498Z,1528914737.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:32:17.499Z,1528914737.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:17.856Z,1528914737.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:32:17.857Z,1528914737.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:18.262Z,1528914738.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:32:18.263Z,1528914738.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:18.659Z,1528914738.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:32:18.660Z,1528914738.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:19.060Z,1528914739.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:32:19.065Z,1528914739.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:19.482Z,1528914739.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:32:19.483Z,1528914739.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:19.871Z,1528914739.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:32:19.871Z,1528914739.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:20.266Z,1528914740.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:32:20.267Z,1528914740.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:20.645Z,1528914740.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:32:20.646Z,1528914740.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:21.044Z,1528914741.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:32:21.045Z,1528914741.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:21.448Z,1528914741.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:32:21.449Z,1528914741.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:21.882Z,1528914741.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:32:21.883Z,1528914741.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:22.256Z,1528914742.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:32:22.257Z,1528914742.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:22.655Z,1528914742.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:32:22.656Z,1528914742.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:23.059Z,1528914743.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:32:23.059Z,1528914743.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:23.459Z,1528914743.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:32:23.461Z,1528914743.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:23.851Z,1528914743.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:32:23.852Z,1528914743.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:24.255Z,1528914744.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:32:24.256Z,1528914744.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:24.649Z,1528914744.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:32:24.650Z,1528914744.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:25.051Z,1528914745.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:32:25.052Z,1528914745.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:25.461Z,1528914745.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T18:32:25.462Z,1528914745.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:25.860Z,1528914745.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:32:25.861Z,1528914745.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:26.260Z,1528914746.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:32:26.261Z,1528914746.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:26.652Z,1528914746.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T18:32:26.653Z,1528914746.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:27.048Z,1528914747.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:32:27.050Z,1528914747.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:27.456Z,1528914747.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:32:27.457Z,1528914747.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:27.864Z,1528914747.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:32:27.869Z,1528914747.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:28.266Z,1528914748.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:32:28.267Z,1528914748.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:28.660Z,1528914748.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:32:28.661Z,1528914748.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:29.065Z,1528914749.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:32:29.066Z,1528914749.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:29.457Z,1528914749.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:32:29.458Z,1528914749.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:29.856Z,1528914749.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:32:29.857Z,1528914749.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:30.256Z,1528914750.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T18:32:30.257Z,1528914750.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:30.658Z,1528914750.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:32:30.659Z,1528914750.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:31.053Z,1528914751.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:32:31.054Z,1528914751.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:31.477Z,1528914751.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:32:31.478Z,1528914751.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:31.861Z,1528914751.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:32:31.862Z,1528914751.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:32.272Z,1528914752.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:32:32.273Z,1528914752.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:32.658Z,1528914752.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:32:32.658Z,1528914752.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:33.056Z,1528914753.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:32:33.061Z,1528914753.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:33.462Z,1528914753.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:32:33.462Z,1528914753.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:33.864Z,1528914753.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:32:33.866Z,1528914753.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:34.266Z,1528914754.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:32:34.267Z,1528914754.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:34.663Z,1528914754.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T18:32:34.664Z,1528914754.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:35.071Z,1528914755.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T18:32:35.071Z,1528914755.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:35.473Z,1528914755.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:35.854Z,1528914755.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:36.272Z,1528914756.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:36.650Z,1528914756.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:37.048Z,1528914757.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:37.476Z,1528914757.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:37.877Z,1528914757.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:38.264Z,1528914758.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:38.660Z,1528914758.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:39.048Z,1528914759.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:39.453Z,1528914759.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:39.868Z,1528914759.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:40.255Z,1528914760.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:40.666Z,1528914760.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:41.073Z,1528914761.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:41.458Z,1528914761.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:41.857Z,1528914761.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:42.260Z,1528914762.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:42.664Z,1528914762.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:43.060Z,1528914763.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:43.472Z,1528914763.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:43.868Z,1528914763.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:44.272Z,1528914764.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:44.658Z,1528914764.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:45.064Z,1528914765.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:45.445Z,1528914765.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:45.872Z,1528914765.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:46.276Z,1528914766.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:46.679Z,1528914766.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:47.083Z,1528914767.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:47.460Z,1528914767.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:47.850Z,1528914767.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:48.252Z,1528914768.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:48.647Z,1528914768.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:49.051Z,1528914769.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:49.460Z,1528914769.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:49.855Z,1528914769.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:50.259Z,1528914770.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:50.652Z,1528914770.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:51.048Z,1528914771.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:51.455Z,1528914771.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:51.859Z,1528914771.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:52.283Z,1528914772.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:52.652Z,1528914772.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:53.057Z,1528914773.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:53.457Z,1528914773.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:53.864Z,1528914773.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:54.264Z,1528914774.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:54.649Z,1528914774.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:55.055Z,1528914775.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:55.461Z,1528914775.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:55.860Z,1528914775.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:56.265Z,1528914776.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:56.652Z,1528914776.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:57.050Z,1528914777.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:57.464Z,1528914777.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:57.868Z,1528914777.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:58.264Z,1528914778.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:58.653Z,1528914778.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:59.056Z,1528914779.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:59.460Z,1528914779.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:32:59.864Z,1528914779.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:00.263Z,1528914780.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:00.649Z,1528914780.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:01.055Z,1528914781.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:01.463Z,1528914781.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:04.593Z,1528914784.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:04.751Z,1528914784.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:05.144Z,1528914785.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:05.548Z,1528914785.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:05.937Z,1528914785.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:06.324Z,1528914786.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:06.750Z,1528914786.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:07.165Z,1528914787.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:07.548Z,1528914787.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:07.925Z,1528914787.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:08.343Z,1528914788.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:08.732Z,1528914788.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:09.126Z,1528914789.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:09.535Z,1528914789.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:09.963Z,1528914789.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:10.362Z,1528914790.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:10.736Z,1528914790.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:11.136Z,1528914791.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:11.527Z,1528914791.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:11.935Z,1528914791.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:12.331Z,1528914792.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:12.740Z,1528914792.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:13.144Z,1528914793.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:13.539Z,1528914793.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:13.939Z,1528914793.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:14.331Z,1528914794.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:14.732Z,1528914794.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:15.128Z,1528914795.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:15.540Z,1528914795.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:15.939Z,1528914795.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:16.335Z,1528914796.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:16.732Z,1528914796.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:17.132Z,1528914797.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:17.528Z,1528914797.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:17.932Z,1528914797.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:18.331Z,1528914798.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:18.744Z,1528914798.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:19.139Z,1528914799.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:19.539Z,1528914799.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:19.928Z,1528914799.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:20.332Z,1528914800.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:20.732Z,1528914800.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:21.128Z,1528914801.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:21.537Z,1528914801.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:21.940Z,1528914801.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:22.341Z,1528914802.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:22.739Z,1528914802.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:23.140Z,1528914803.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:23.530Z,1528914803.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:23.945Z,1528914803.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:24.346Z,1528914804.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:24.740Z,1528914804.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:25.152Z,1528914805.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:25.547Z,1528914805.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:25.939Z,1528914805.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:26.333Z,1528914806.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:26.736Z,1528914806.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:27.138Z,1528914807.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:27.542Z,1528914807.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:27.942Z,1528914807.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:28.346Z,1528914808.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:28.743Z,1528914808.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:29.143Z,1528914809.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:29.536Z,1528914809.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:29.934Z,1528914809.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:30.350Z,1528914810.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:30.743Z,1528914810.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:31.150Z,1528914811.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:31.557Z,1528914811.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:31.920Z,1528914811.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:32.353Z,1528914812.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:32.725Z,1528914812.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:33.124Z,1528914813.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:33.551Z,1528914813.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:33.952Z,1528914813.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:34.348Z,1528914814.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:34.740Z,1528914814.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:35.129Z,1528914815.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:35.527Z,1528914815.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:35.932Z,1528914815.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:36.327Z,1528914816.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:36.739Z,1528914816.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:37.138Z,1528914817.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:37.540Z,1528914817.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:37.930Z,1528914817.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:38.329Z,1528914818.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:38.731Z,1528914818.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:39.129Z,1528914819.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:39.535Z,1528914819.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:39.935Z,1528914819.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:40.335Z,1528914820.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:40.730Z,1528914820.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:41.129Z,1528914821.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:41.543Z,1528914821.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:41.939Z,1528914821.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:42.344Z,1528914822.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:42.733Z,1528914822.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:43.131Z,1528914823.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:43.540Z,1528914823.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:43.944Z,1528914823.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:44.339Z,1528914824.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:44.732Z,1528914824.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:45.130Z,1528914825.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:45.544Z,1528914825.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:45.944Z,1528914825.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:46.344Z,1528914826.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:46.731Z,1528914826.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:47.131Z,1528914827.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:47.544Z,1528914827.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:47.944Z,1528914827.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:48.340Z,1528914828.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:48.731Z,1528914828.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:49.131Z,1528914829.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:49.548Z,1528914829.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:49.944Z,1528914829.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:50.340Z,1528914830.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:50.732Z,1528914830.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:51.136Z,1528914831.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:51.544Z,1528914831.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:51.944Z,1528914831.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:52.343Z,1528914832.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:52.731Z,1528914832.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:53.126Z,1528914833.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:53.545Z,1528914833.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:53.944Z,1528914833.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:54.340Z,1528914834.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:54.731Z,1528914834.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:55.132Z,1528914835.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:55.544Z,1528914835.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:55.944Z,1528914835.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:56.348Z,1528914836.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:56.734Z,1528914836.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:57.131Z,1528914837.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:57.539Z,1528914837.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:57.941Z,1528914837.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:58.341Z,1528914838.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:58.733Z,1528914838.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:59.140Z,1528914839.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:59.540Z,1528914839.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:33:59.944Z,1528914839.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:00.341Z,1528914840.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:00.736Z,1528914840.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:01.141Z,1528914841.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:01.545Z,1528914841.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:04.676Z,1528914844.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:04.853Z,1528914844.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:05.223Z,1528914845.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:05.616Z,1528914845.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:06.019Z,1528914846.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:06.413Z,1528914846.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:06.845Z,1528914846.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:07.246Z,1528914847.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:07.628Z,1528914847.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:08.014Z,1528914848.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:08.406Z,1528914848.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:08.816Z,1528914848.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:09.209Z,1528914849.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:09.619Z,1528914849.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:10.024Z,1528914850.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:10.420Z,1528914850.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:10.831Z,1528914850.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:11.217Z,1528914851.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:11.609Z,1528914851.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:12.013Z,1528914852.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:12.416Z,1528914852.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:12.821Z,1528914852.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:13.225Z,1528914853.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:13.628Z,1528914853.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:14.018Z,1528914854.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:14.410Z,1528914854.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:14.817Z,1528914854.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:15.209Z,1528914855.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:15.619Z,1528914855.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:16.025Z,1528914856.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:16.417Z,1528914856.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:16.813Z,1528914856.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:17.216Z,1528914857.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:17.612Z,1528914857.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:18.013Z,1528914858.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:18.416Z,1528914858.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:18.828Z,1528914858.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:19.228Z,1528914859.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:19.626Z,1528914859.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:20.010Z,1528914860.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:20.407Z,1528914860.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:20.814Z,1528914860.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:21.208Z,1528914861.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:21.620Z,1528914861.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:22.025Z,1528914862.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:22.424Z,1528914862.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:22.811Z,1528914862.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:23.218Z,1528914863.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:23.613Z,1528914863.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:24.011Z,1528914864.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:24.420Z,1528914864.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:24.821Z,1528914864.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:25.228Z,1528914865.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:25.627Z,1528914865.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:26.012Z,1528914866.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:26.412Z,1528914866.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:26.816Z,1528914866.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:27.217Z,1528914867.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:27.622Z,1528914867.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:28.026Z,1528914868.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:28.425Z,1528914868.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:28.816Z,1528914868.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:29.221Z,1528914869.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:29.608Z,1528914869.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:30.012Z,1528914870.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:30.409Z,1528914870.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:30.839Z,1528914870.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:31.238Z,1528914871.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:31.619Z,1528914871.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:32.010Z,1528914872.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:32.410Z,1528914872.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:32.826Z,1528914872.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:33.214Z,1528914873.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:33.616Z,1528914873.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:34.019Z,1528914874.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:34.415Z,1528914874.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:34.811Z,1528914874.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:35.220Z,1528914875.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:35.624Z,1528914875.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:36.020Z,1528914876.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:36.420Z,1528914876.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:36.808Z,1528914876.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:37.218Z,1528914877.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:37.624Z,1528914877.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:38.028Z,1528914878.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:38.420Z,1528914878.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:38.818Z,1528914878.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:39.208Z,1528914879.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:39.624Z,1528914879.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:40.025Z,1528914880.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:40.424Z,1528914880.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:40.812Z,1528914880.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:41.212Z,1528914881.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:41.617Z,1528914881.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:42.024Z,1528914882.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:42.424Z,1528914882.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:42.813Z,1528914882.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:43.219Z,1528914883.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:43.625Z,1528914883.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:44.021Z,1528914884.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:44.420Z,1528914884.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:44.814Z,1528914884.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:45.212Z,1528914885.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:45.618Z,1528914885.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:46.026Z,1528914886.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:46.424Z,1528914886.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:46.816Z,1528914886.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:47.224Z,1528914887.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:47.624Z,1528914887.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:48.024Z,1528914888.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:48.432Z,1528914888.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:48.819Z,1528914888.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:49.216Z,1528914889.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:49.627Z,1528914889.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:50.027Z,1528914890.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:50.421Z,1528914890.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:50.826Z,1528914890.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:51.220Z,1528914891.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:51.626Z,1528914891.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:52.027Z,1528914892.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:52.422Z,1528914892.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:52.814Z,1528914892.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:53.217Z,1528914893.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:53.623Z,1528914893.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:54.025Z,1528914894.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:54.438Z,1528914894.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:54.820Z,1528914894.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:55.213Z,1528914895.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:55.627Z,1528914895.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:56.020Z,1528914896.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:56.432Z,1528914896.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:56.822Z,1528914896.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:57.224Z,1528914897.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:57.623Z,1528914897.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:58.027Z,1528914898.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:58.419Z,1528914898.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:58.819Z,1528914898.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:59.224Z,1528914899.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:34:59.619Z,1528914899.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:00.025Z,1528914900.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:00.427Z,1528914900.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:00.821Z,1528914900.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:01.226Z,1528914901.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:01.630Z,1528914901.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:02.028Z,1528914902.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:02.423Z,1528914902.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:02.824Z,1528914902.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:05.924Z,1528914905.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:06.092Z,1528914906.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:06.479Z,1528914906.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:06.873Z,1528914906.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:07.270Z,1528914907.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:07.672Z,1528914907.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:08.073Z,1528914908.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:08.472Z,1528914908.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:08.877Z,1528914908.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:09.275Z,1528914909.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:09.678Z,1528914909.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:10.053Z,1528914910.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:10.452Z,1528914910.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:10.857Z,1528914910.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:11.254Z,1528914911.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:11.682Z,1528914911.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:12.079Z,1528914912.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:12.483Z,1528914912.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:12.856Z,1528914912.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:13.255Z,1528914913.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:13.687Z,1528914913.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:14.067Z,1528914914.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:14.467Z,1528914914.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:14.864Z,1528914914.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:15.260Z,1528914915.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:15.663Z,1528914915.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:16.068Z,1528914916.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:16.463Z,1528914916.463 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:16.463Z,1528914916.463 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 302
2018-06-13T18:35:16.463Z,1528914916.463 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:35:16.465Z,1528914916.465 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:16.465Z,1528914916.465 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 302
2018-06-13T18:35:16.465Z,1528914916.465 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:35:16.467Z,1528914916.467 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:16.467Z,1528914916.467 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 302
2018-06-13T18:35:16.467Z,1528914916.467 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:35:16.565Z,1528914916.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:35:16.565Z,1528914916.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:35:16.566Z,1528914916.566 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:35:16.949Z,1528914916.949 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:35:16.949Z,1528914916.949 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 302
2018-06-13T18:35:16.950Z,1528914916.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:35:16.950Z,1528914916.950 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 302
2018-06-13T18:35:16.950Z,1528914916.950 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:35:16.950Z,1528914916.950 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 302
2018-06-13T18:35:17.267Z,1528914917.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:35:17.267Z,1528914917.267 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:35:17.268Z,1528914917.268 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:35:17.268Z,1528914917.268 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:35:17.268Z,1528914917.268 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:35:17.269Z,1528914917.269 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:35:17.269Z,1528914917.269 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:35:17.270Z,1528914917.270 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:35:17.270Z,1528914917.270 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:35:17.664Z,1528914917.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:35:17.665Z,1528914917.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:18.072Z,1528914918.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:35:18.074Z,1528914918.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:18.472Z,1528914918.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:35:18.473Z,1528914918.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:18.861Z,1528914918.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:35:18.862Z,1528914918.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:19.258Z,1528914919.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:35:19.258Z,1528914919.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:19.680Z,1528914919.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:35:19.681Z,1528914919.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:20.068Z,1528914920.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:35:20.069Z,1528914920.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:20.468Z,1528914920.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:35:20.469Z,1528914920.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:20.866Z,1528914920.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:35:20.867Z,1528914920.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:21.259Z,1528914921.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:35:21.260Z,1528914921.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:21.668Z,1528914921.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:35:21.670Z,1528914921.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:22.073Z,1528914922.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:35:22.074Z,1528914922.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:22.464Z,1528914922.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:35:22.465Z,1528914922.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:22.856Z,1528914922.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:35:22.857Z,1528914922.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:23.271Z,1528914923.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:35:23.272Z,1528914923.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:23.672Z,1528914923.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:35:23.673Z,1528914923.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:24.072Z,1528914924.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:35:24.073Z,1528914924.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:24.480Z,1528914924.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:35:24.481Z,1528914924.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:24.860Z,1528914924.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:35:24.861Z,1528914924.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:25.258Z,1528914925.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:35:25.259Z,1528914925.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:25.680Z,1528914925.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:35:25.681Z,1528914925.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:26.068Z,1528914926.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:35:26.069Z,1528914926.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:26.468Z,1528914926.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T18:35:26.470Z,1528914926.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:26.868Z,1528914926.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:35:26.869Z,1528914926.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:27.260Z,1528914927.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:35:27.261Z,1528914927.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:27.671Z,1528914927.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T18:35:27.672Z,1528914927.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:28.073Z,1528914928.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:35:28.074Z,1528914928.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:28.472Z,1528914928.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:35:28.473Z,1528914928.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:28.870Z,1528914928.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:35:28.871Z,1528914928.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:29.263Z,1528914929.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:35:29.264Z,1528914929.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:29.674Z,1528914929.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:35:29.675Z,1528914929.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:30.080Z,1528914930.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:35:30.081Z,1528914930.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:30.476Z,1528914930.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:35:30.477Z,1528914930.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:30.861Z,1528914930.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:35:30.862Z,1528914930.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:31.261Z,1528914931.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T18:35:31.262Z,1528914931.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:31.674Z,1528914931.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:35:31.675Z,1528914931.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:32.069Z,1528914932.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:35:32.070Z,1528914932.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:32.470Z,1528914932.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:35:32.471Z,1528914932.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:32.863Z,1528914932.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:35:32.864Z,1528914932.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:33.256Z,1528914933.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:35:33.258Z,1528914933.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:33.670Z,1528914933.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:35:33.671Z,1528914933.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:34.074Z,1528914934.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:35:34.075Z,1528914934.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:34.467Z,1528914934.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:35:34.468Z,1528914934.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:34.863Z,1528914934.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:35:34.864Z,1528914934.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:35.259Z,1528914935.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:35:35.260Z,1528914935.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:35.670Z,1528914935.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T18:35:35.671Z,1528914935.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:36.072Z,1528914936.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T18:35:36.073Z,1528914936.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:36.469Z,1528914936.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:36.862Z,1528914936.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:37.265Z,1528914937.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:37.674Z,1528914937.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:38.069Z,1528914938.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:38.469Z,1528914938.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:38.863Z,1528914938.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:39.258Z,1528914939.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:39.659Z,1528914939.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:40.070Z,1528914940.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:40.469Z,1528914940.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:40.867Z,1528914940.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:41.268Z,1528914941.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:41.665Z,1528914941.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:42.062Z,1528914942.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:42.463Z,1528914942.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:42.869Z,1528914942.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:43.272Z,1528914943.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:43.672Z,1528914943.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:44.062Z,1528914944.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:44.460Z,1528914944.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:44.863Z,1528914944.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:45.262Z,1528914945.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:45.660Z,1528914945.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:46.073Z,1528914946.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:46.467Z,1528914946.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:46.873Z,1528914946.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:47.260Z,1528914947.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:47.665Z,1528914947.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:48.072Z,1528914948.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:48.467Z,1528914948.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:48.874Z,1528914948.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:49.272Z,1528914949.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:49.670Z,1528914949.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:50.065Z,1528914950.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:50.465Z,1528914950.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:50.869Z,1528914950.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:51.265Z,1528914951.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:51.664Z,1528914951.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:52.073Z,1528914952.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:52.471Z,1528914952.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:52.868Z,1528914952.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:53.267Z,1528914953.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:53.672Z,1528914953.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:54.064Z,1528914954.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:54.473Z,1528914954.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:54.873Z,1528914954.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:55.275Z,1528914955.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:55.675Z,1528914955.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:56.068Z,1528914956.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:56.452Z,1528914956.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:56.877Z,1528914956.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:57.269Z,1528914957.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:57.656Z,1528914957.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:58.080Z,1528914958.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:58.479Z,1528914958.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:58.882Z,1528914958.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:59.256Z,1528914959.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:35:59.660Z,1528914959.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:00.060Z,1528914960.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:00.456Z,1528914960.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:00.883Z,1528914960.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:01.285Z,1528914961.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:01.288Z,1528914961.288 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T18:36:01.288Z,1528914961.288 [Default:CheckIn:C.Wait] Stopped
2018-06-13T18:36:01.288Z,1528914961.288 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T18:36:01.288Z,1528914961.288 [Default:CheckIn:D] Running Loop=1
2018-06-13T18:36:01.686Z,1528914961.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:01.689Z,1528914961.689 [Default:CheckIn:D] Stopped
2018-06-13T18:36:01.689Z,1528914961.689 [Default:CheckIn:E] Running Loop=1
2018-06-13T18:36:04.782Z,1528914964.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:04.786Z,1528914964.786 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 908.804036 min 
2018-06-13T18:36:04.786Z,1528914964.786 [Default:CheckIn:E] Stopped
2018-06-13T18:36:04.786Z,1528914964.786 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T18:36:04.786Z,1528914964.786 [Default:CheckIn] Stopped
2018-06-13T18:36:04.786Z,1528914964.786 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T18:36:04.787Z,1528914964.787 [Default:CheckIn](INFO): Running loop #88
2018-06-13T18:36:04.787Z,1528914964.787 [Default:CheckIn] Running Loop=88
2018-06-13T18:36:04.787Z,1528914964.787 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T18:36:04.787Z,1528914964.787 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T18:36:04.936Z,1528914964.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:05.347Z,1528914965.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:05.751Z,1528914965.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:06.123Z,1528914966.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:06.524Z,1528914966.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:06.920Z,1528914966.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:07.318Z,1528914967.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:07.727Z,1528914967.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:08.127Z,1528914968.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:08.520Z,1528914968.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:08.921Z,1528914968.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:09.318Z,1528914969.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:09.723Z,1528914969.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:10.123Z,1528914970.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:10.523Z,1528914970.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:10.920Z,1528914970.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:11.320Z,1528914971.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:11.727Z,1528914971.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:12.126Z,1528914972.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:12.527Z,1528914972.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:12.920Z,1528914972.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:13.331Z,1528914973.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:13.727Z,1528914973.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:14.132Z,1528914974.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:14.524Z,1528914974.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:14.930Z,1528914974.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:15.323Z,1528914975.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:15.729Z,1528914975.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:16.136Z,1528914976.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:16.556Z,1528914976.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:16.916Z,1528914976.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:17.322Z,1528914977.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:17.733Z,1528914977.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:18.133Z,1528914978.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:18.530Z,1528914978.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:18.933Z,1528914978.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:19.332Z,1528914979.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:19.726Z,1528914979.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:20.129Z,1528914980.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:20.513Z,1528914980.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:20.934Z,1528914980.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:21.339Z,1528914981.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:21.739Z,1528914981.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:22.118Z,1528914982.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:22.511Z,1528914982.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:22.916Z,1528914982.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:23.316Z,1528914983.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:23.716Z,1528914983.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:24.143Z,1528914984.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:24.527Z,1528914984.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:24.924Z,1528914984.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:25.317Z,1528914985.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:25.728Z,1528914985.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:26.119Z,1528914986.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:26.518Z,1528914986.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:26.928Z,1528914986.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:27.328Z,1528914987.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:27.731Z,1528914987.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:28.119Z,1528914988.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:28.519Z,1528914988.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:28.923Z,1528914988.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:29.320Z,1528914989.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:29.717Z,1528914989.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:30.127Z,1528914990.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:30.528Z,1528914990.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:30.928Z,1528914990.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:31.320Z,1528914991.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:31.720Z,1528914991.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:32.125Z,1528914992.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:32.519Z,1528914992.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:32.928Z,1528914992.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:33.327Z,1528914993.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:33.727Z,1528914993.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:34.119Z,1528914994.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:34.517Z,1528914994.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:34.918Z,1528914994.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:35.326Z,1528914995.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:35.715Z,1528914995.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:36.127Z,1528914996.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:36.529Z,1528914996.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:36.928Z,1528914996.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:37.320Z,1528914997.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:37.727Z,1528914997.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:38.117Z,1528914998.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:38.519Z,1528914998.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:38.928Z,1528914998.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:39.328Z,1528914999.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:39.727Z,1528914999.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:40.124Z,1528915000.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:40.516Z,1528915000.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:40.920Z,1528915000.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:41.326Z,1528915001.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:41.716Z,1528915001.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:42.132Z,1528915002.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:42.532Z,1528915002.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:42.928Z,1528915002.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:43.320Z,1528915003.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:43.720Z,1528915003.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:44.118Z,1528915004.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:44.519Z,1528915004.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:44.929Z,1528915004.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:45.332Z,1528915005.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:45.727Z,1528915005.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:46.120Z,1528915006.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:46.516Z,1528915006.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:46.920Z,1528915006.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:47.326Z,1528915007.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:47.716Z,1528915007.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:48.127Z,1528915008.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:48.533Z,1528915008.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:48.925Z,1528915008.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:49.320Z,1528915009.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:49.725Z,1528915009.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:50.128Z,1528915010.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:50.520Z,1528915010.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:50.940Z,1528915010.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:51.331Z,1528915011.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:51.733Z,1528915011.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:52.128Z,1528915012.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:52.525Z,1528915012.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:52.931Z,1528915012.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:53.332Z,1528915013.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:53.734Z,1528915013.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:54.131Z,1528915014.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:54.547Z,1528915014.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:54.944Z,1528915014.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:55.321Z,1528915015.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:55.715Z,1528915015.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:56.114Z,1528915016.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:56.518Z,1528915016.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:56.944Z,1528915016.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:57.340Z,1528915017.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:57.742Z,1528915017.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:58.116Z,1528915018.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:58.517Z,1528915018.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:58.920Z,1528915018.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:59.318Z,1528915019.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:36:59.712Z,1528915019.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:00.127Z,1528915020.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:00.548Z,1528915020.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:00.924Z,1528915020.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:01.320Z,1528915021.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:01.720Z,1528915021.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:02.119Z,1528915022.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:02.521Z,1528915022.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:02.932Z,1528915022.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:03.328Z,1528915023.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:03.731Z,1528915023.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:04.124Z,1528915024.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:04.519Z,1528915024.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:04.922Z,1528915024.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:08.032Z,1528915028.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:08.215Z,1528915028.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:08.616Z,1528915028.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:09.015Z,1528915029.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:09.412Z,1528915029.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:09.804Z,1528915029.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:10.210Z,1528915030.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:10.588Z,1528915030.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:11.020Z,1528915031.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:11.419Z,1528915031.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:11.820Z,1528915031.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:12.188Z,1528915032.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:12.593Z,1528915032.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:12.988Z,1528915032.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:13.393Z,1528915033.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:13.792Z,1528915033.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:14.199Z,1528915034.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:14.625Z,1528915034.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:15.004Z,1528915035.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:15.391Z,1528915035.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:15.793Z,1528915035.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:16.206Z,1528915036.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:16.601Z,1528915036.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:17.004Z,1528915037.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:17.405Z,1528915037.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:17.801Z,1528915037.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:18.201Z,1528915038.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:18.596Z,1528915038.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:18.993Z,1528915038.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:19.395Z,1528915039.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:19.799Z,1528915039.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:20.203Z,1528915040.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:20.605Z,1528915040.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:21.006Z,1528915041.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:21.392Z,1528915041.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:21.796Z,1528915041.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:22.197Z,1528915042.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:22.592Z,1528915042.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:23.005Z,1528915043.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:23.405Z,1528915043.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:23.802Z,1528915043.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:24.196Z,1528915044.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:24.604Z,1528915044.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:24.993Z,1528915044.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:25.395Z,1528915045.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:25.800Z,1528915045.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:26.202Z,1528915046.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:26.608Z,1528915046.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:27.010Z,1528915047.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:27.392Z,1528915047.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:27.801Z,1528915047.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:28.200Z,1528915048.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:28.601Z,1528915048.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:29.005Z,1528915049.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:29.410Z,1528915049.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:29.802Z,1528915049.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:30.196Z,1528915050.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:30.604Z,1528915050.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:30.997Z,1528915050.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:31.398Z,1528915051.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:31.799Z,1528915051.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:32.202Z,1528915052.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:32.610Z,1528915052.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:33.036Z,1528915053.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:33.400Z,1528915053.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:33.809Z,1528915053.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:34.213Z,1528915054.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:34.585Z,1528915054.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:35.007Z,1528915055.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:35.410Z,1528915055.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:35.807Z,1528915055.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:36.188Z,1528915056.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:36.590Z,1528915056.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:36.988Z,1528915056.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:37.396Z,1528915057.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:37.793Z,1528915057.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:38.200Z,1528915058.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:38.622Z,1528915058.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:39.020Z,1528915059.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:39.393Z,1528915059.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:39.792Z,1528915059.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:40.193Z,1528915060.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:40.604Z,1528915060.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:41.001Z,1528915061.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:41.403Z,1528915061.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:41.801Z,1528915061.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:42.198Z,1528915062.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:42.591Z,1528915062.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:42.992Z,1528915062.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:43.396Z,1528915063.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:43.795Z,1528915063.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:44.205Z,1528915064.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:44.627Z,1528915064.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:45.003Z,1528915065.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:45.393Z,1528915065.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:45.801Z,1528915065.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:46.198Z,1528915066.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:46.593Z,1528915066.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:47.001Z,1528915067.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:47.403Z,1528915067.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:47.805Z,1528915067.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:48.196Z,1528915068.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:48.595Z,1528915068.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:48.991Z,1528915068.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:49.396Z,1528915069.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:49.796Z,1528915069.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:50.200Z,1528915070.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:50.603Z,1528915070.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:51.001Z,1528915071.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:51.392Z,1528915071.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:51.796Z,1528915071.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:52.196Z,1528915072.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:52.592Z,1528915072.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:53.002Z,1528915073.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:53.403Z,1528915073.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:53.804Z,1528915073.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:54.194Z,1528915074.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:54.595Z,1528915074.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:55.001Z,1528915075.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:55.396Z,1528915075.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:55.796Z,1528915075.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:56.205Z,1528915076.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:56.603Z,1528915076.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:57.003Z,1528915077.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:57.401Z,1528915077.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:57.796Z,1528915077.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:58.195Z,1528915078.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:58.599Z,1528915078.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:59.005Z,1528915079.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:59.404Z,1528915079.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:37:59.804Z,1528915079.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:00.195Z,1528915080.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:00.596Z,1528915080.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:01.001Z,1528915081.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:01.400Z,1528915081.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:01.799Z,1528915081.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:04.932Z,1528915084.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:05.128Z,1528915085.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:05.494Z,1528915085.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:05.886Z,1528915085.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:06.286Z,1528915086.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:06.690Z,1528915086.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:07.089Z,1528915087.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:07.489Z,1528915087.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:07.896Z,1528915087.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:08.284Z,1528915088.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:08.665Z,1528915088.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:09.064Z,1528915089.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:09.489Z,1528915089.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:09.872Z,1528915089.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:10.297Z,1528915090.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:10.695Z,1528915090.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:11.098Z,1528915091.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:11.472Z,1528915091.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:11.872Z,1528915091.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:12.276Z,1528915092.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:12.676Z,1528915092.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:13.103Z,1528915093.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:13.500Z,1528915093.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:13.901Z,1528915093.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:14.276Z,1528915094.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:14.672Z,1528915094.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:15.076Z,1528915095.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:15.473Z,1528915095.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:15.871Z,1528915095.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:16.238Z,1528915096.238 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T18:38:16.238Z,1528915096.238 [NAL9602] Data Fault, FailCount= 3
2018-06-13T18:38:16.238Z,1528915096.238 [NAL9602](ERROR): Data Fault
2018-06-13T18:38:16.273Z,1528915096.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:16.369Z,1528915096.369 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T18:38:16.638Z,1528915096.638 [NAL9602](INFO): Powering down
2018-06-13T18:38:16.672Z,1528915096.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:17.073Z,1528915097.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:17.470Z,1528915097.470 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:17.470Z,1528915097.470 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 303
2018-06-13T18:38:17.470Z,1528915097.470 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:38:17.472Z,1528915097.472 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:17.472Z,1528915097.472 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 303
2018-06-13T18:38:17.472Z,1528915097.472 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:38:17.474Z,1528915097.474 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:17.474Z,1528915097.474 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 303
2018-06-13T18:38:17.474Z,1528915097.474 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:38:17.549Z,1528915097.549 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T18:38:17.549Z,1528915097.549 [NAL9602] No Fault, FailCount= 3
2018-06-13T18:38:17.550Z,1528915097.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:38:17.550Z,1528915097.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:38:17.550Z,1528915097.550 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:38:17.953Z,1528915097.953 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:38:17.953Z,1528915097.953 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 303
2018-06-13T18:38:17.954Z,1528915097.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:38:17.954Z,1528915097.954 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 303
2018-06-13T18:38:17.954Z,1528915097.954 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:38:17.954Z,1528915097.954 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 303
2018-06-13T18:38:18.278Z,1528915098.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:38:18.279Z,1528915098.279 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:38:18.279Z,1528915098.279 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:38:18.279Z,1528915098.279 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:38:18.280Z,1528915098.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:38:18.280Z,1528915098.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:38:18.280Z,1528915098.280 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:38:18.281Z,1528915098.281 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:38:18.281Z,1528915098.281 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:38:18.680Z,1528915098.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:38:18.681Z,1528915098.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:19.080Z,1528915099.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:38:19.081Z,1528915099.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:19.475Z,1528915099.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:38:19.476Z,1528915099.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:19.873Z,1528915099.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:38:19.874Z,1528915099.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:20.275Z,1528915100.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:38:20.276Z,1528915100.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:20.680Z,1528915100.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:38:20.680Z,1528915100.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:21.072Z,1528915101.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:38:21.073Z,1528915101.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:21.480Z,1528915101.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:38:21.481Z,1528915101.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:21.874Z,1528915101.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:38:21.875Z,1528915101.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:22.274Z,1528915102.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:38:22.275Z,1528915102.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:22.675Z,1528915102.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:38:22.675Z,1528915102.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:23.080Z,1528915103.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:38:23.080Z,1528915103.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:23.482Z,1528915103.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:38:23.483Z,1528915103.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:23.880Z,1528915103.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:38:23.881Z,1528915103.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:24.280Z,1528915104.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:38:24.282Z,1528915104.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:24.677Z,1528915104.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:38:24.678Z,1528915104.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:25.077Z,1528915105.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:38:25.078Z,1528915105.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:25.485Z,1528915105.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:38:25.486Z,1528915105.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:25.876Z,1528915105.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:38:25.877Z,1528915105.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:26.284Z,1528915106.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:38:26.290Z,1528915106.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:26.688Z,1528915106.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:38:26.693Z,1528915106.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:27.069Z,1528915107.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:38:27.070Z,1528915107.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:27.466Z,1528915107.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T18:38:27.467Z,1528915107.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:27.900Z,1528915107.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:38:27.901Z,1528915107.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:28.271Z,1528915108.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:38:28.272Z,1528915108.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:28.668Z,1528915108.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T18:38:28.669Z,1528915108.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:29.073Z,1528915109.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:38:29.074Z,1528915109.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:29.471Z,1528915109.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:38:29.471Z,1528915109.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:29.867Z,1528915109.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:38:29.868Z,1528915109.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:30.276Z,1528915110.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:38:30.277Z,1528915110.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:30.671Z,1528915110.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:38:30.672Z,1528915110.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:31.067Z,1528915111.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:38:31.068Z,1528915111.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:31.476Z,1528915111.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:38:31.477Z,1528915111.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:31.891Z,1528915111.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:38:31.892Z,1528915111.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:32.271Z,1528915112.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T18:38:32.272Z,1528915112.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:32.672Z,1528915112.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:38:32.673Z,1528915112.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:33.071Z,1528915113.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:38:33.072Z,1528915113.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:33.468Z,1528915113.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:38:33.469Z,1528915113.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:33.872Z,1528915113.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:38:33.874Z,1528915113.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:34.271Z,1528915114.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:38:34.272Z,1528915114.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:34.669Z,1528915114.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:38:34.670Z,1528915114.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:35.071Z,1528915115.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:38:35.071Z,1528915115.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:35.470Z,1528915115.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:38:35.471Z,1528915115.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:35.870Z,1528915115.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:38:35.871Z,1528915115.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:36.271Z,1528915116.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:38:36.272Z,1528915116.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:36.670Z,1528915116.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T18:38:36.671Z,1528915116.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:37.070Z,1528915117.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T18:38:37.071Z,1528915117.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:37.472Z,1528915117.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:37.871Z,1528915117.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:38.271Z,1528915118.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:38.672Z,1528915118.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:39.071Z,1528915119.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:39.470Z,1528915119.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:39.871Z,1528915119.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:40.276Z,1528915120.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:40.670Z,1528915120.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:41.071Z,1528915121.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:41.475Z,1528915121.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:41.869Z,1528915121.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:42.272Z,1528915122.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:42.671Z,1528915122.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:43.071Z,1528915123.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:43.472Z,1528915123.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:43.871Z,1528915123.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:44.270Z,1528915124.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:44.671Z,1528915124.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:45.071Z,1528915125.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:45.470Z,1528915125.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:45.871Z,1528915125.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:46.271Z,1528915126.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:46.669Z,1528915126.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:47.038Z,1528915127.038 [NAL9602](INFO): Powering up NAL9602
2018-06-13T18:38:47.076Z,1528915127.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:47.470Z,1528915127.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:47.871Z,1528915127.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:48.272Z,1528915128.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:48.671Z,1528915128.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:49.070Z,1528915129.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:49.471Z,1528915129.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:49.871Z,1528915129.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:50.272Z,1528915130.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:50.671Z,1528915130.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:51.071Z,1528915131.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:51.469Z,1528915131.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:51.871Z,1528915131.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:52.271Z,1528915132.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:52.669Z,1528915132.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:53.072Z,1528915133.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:53.479Z,1528915133.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:53.871Z,1528915133.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:54.271Z,1528915134.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:54.671Z,1528915134.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:55.070Z,1528915135.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:55.471Z,1528915135.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:55.871Z,1528915135.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:56.271Z,1528915136.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:56.671Z,1528915136.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:57.071Z,1528915137.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:57.469Z,1528915137.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:57.899Z,1528915137.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:58.238Z,1528915138.238 [NAL9602](INFO): NAL9602 initialized
2018-06-13T18:38:58.276Z,1528915138.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:58.670Z,1528915138.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:59.083Z,1528915139.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:59.483Z,1528915139.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:38:59.884Z,1528915139.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:00.274Z,1528915140.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:00.676Z,1528915140.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:01.073Z,1528915141.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:01.480Z,1528915141.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:01.908Z,1528915141.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:02.310Z,1528915142.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:02.683Z,1528915142.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:03.078Z,1528915143.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:03.478Z,1528915143.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:03.879Z,1528915143.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:04.280Z,1528915144.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:04.678Z,1528915144.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:05.084Z,1528915145.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:05.492Z,1528915145.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:08.591Z,1528915148.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:08.764Z,1528915148.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:09.163Z,1528915149.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:09.536Z,1528915149.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:09.937Z,1528915149.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:10.336Z,1528915150.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:10.748Z,1528915150.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:11.168Z,1528915151.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:11.544Z,1528915151.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:11.944Z,1528915151.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:12.338Z,1528915152.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:12.749Z,1528915152.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:13.144Z,1528915153.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:13.547Z,1528915153.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:13.942Z,1528915153.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:14.335Z,1528915154.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:14.747Z,1528915154.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:15.147Z,1528915155.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:15.542Z,1528915155.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:15.940Z,1528915155.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:16.344Z,1528915156.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:16.743Z,1528915156.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:17.147Z,1528915157.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:17.548Z,1528915157.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:17.936Z,1528915157.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:18.346Z,1528915158.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:18.750Z,1528915158.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:19.154Z,1528915159.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:19.550Z,1528915159.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:19.945Z,1528915159.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:20.351Z,1528915160.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:20.749Z,1528915160.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:21.153Z,1528915161.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:21.555Z,1528915161.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:21.941Z,1528915161.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:22.342Z,1528915162.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:22.750Z,1528915162.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:23.160Z,1528915163.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:23.549Z,1528915163.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:23.948Z,1528915163.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:24.344Z,1528915164.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:24.749Z,1528915164.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:25.153Z,1528915165.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:25.548Z,1528915165.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:25.942Z,1528915165.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:26.341Z,1528915166.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:26.752Z,1528915166.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:27.153Z,1528915167.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:27.550Z,1528915167.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:27.953Z,1528915167.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:28.352Z,1528915168.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:28.732Z,1528915168.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:29.156Z,1528915169.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:29.556Z,1528915169.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:29.959Z,1528915169.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:30.336Z,1528915170.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:30.737Z,1528915170.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:31.132Z,1528915171.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:31.537Z,1528915171.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:31.966Z,1528915171.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:32.363Z,1528915172.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:32.747Z,1528915172.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:33.136Z,1528915173.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:33.534Z,1528915173.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:33.936Z,1528915173.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:34.340Z,1528915174.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:34.734Z,1528915174.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:35.147Z,1528915175.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:35.547Z,1528915175.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:35.948Z,1528915175.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:36.344Z,1528915176.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:36.738Z,1528915176.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:37.136Z,1528915177.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:37.544Z,1528915177.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:37.943Z,1528915177.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:38.343Z,1528915178.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:38.747Z,1528915178.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:39.138Z,1528915179.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:39.536Z,1528915179.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:39.937Z,1528915179.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:40.338Z,1528915180.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:40.736Z,1528915180.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:41.143Z,1528915181.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:41.547Z,1528915181.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:41.943Z,1528915181.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:42.337Z,1528915182.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:42.738Z,1528915182.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:43.136Z,1528915183.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:43.538Z,1528915183.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:43.943Z,1528915183.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:44.342Z,1528915184.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:44.743Z,1528915184.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:45.138Z,1528915185.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:45.539Z,1528915185.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:45.938Z,1528915185.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:46.354Z,1528915186.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:46.736Z,1528915186.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:47.145Z,1528915187.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:47.548Z,1528915187.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:47.944Z,1528915187.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:48.346Z,1528915188.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:48.743Z,1528915188.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:49.136Z,1528915189.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:49.542Z,1528915189.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:49.950Z,1528915189.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:50.349Z,1528915190.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:50.748Z,1528915190.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:51.146Z,1528915191.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:51.543Z,1528915191.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:51.941Z,1528915191.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:52.343Z,1528915192.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:52.745Z,1528915192.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:53.158Z,1528915193.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:53.553Z,1528915193.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:53.949Z,1528915193.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:54.340Z,1528915194.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:54.745Z,1528915194.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:55.144Z,1528915195.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:55.541Z,1528915195.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:55.948Z,1528915195.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:56.350Z,1528915196.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:56.750Z,1528915196.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:57.143Z,1528915197.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:57.542Z,1528915197.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:57.946Z,1528915197.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:58.348Z,1528915198.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:58.752Z,1528915198.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:59.161Z,1528915199.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:59.552Z,1528915199.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:39:59.951Z,1528915199.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:00.340Z,1528915200.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:00.742Z,1528915200.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:01.146Z,1528915201.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:01.544Z,1528915201.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:01.953Z,1528915201.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:05.059Z,1528915205.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:05.235Z,1528915205.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:05.606Z,1528915205.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:06.006Z,1528915206.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:06.408Z,1528915206.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:06.807Z,1528915206.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:07.208Z,1528915207.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:07.608Z,1528915207.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:08.015Z,1528915208.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:08.403Z,1528915208.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:08.811Z,1528915208.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:09.210Z,1528915209.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:09.608Z,1528915209.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:10.003Z,1528915210.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:10.403Z,1528915210.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:10.804Z,1528915210.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:11.211Z,1528915211.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:11.610Z,1528915211.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:12.008Z,1528915212.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:12.403Z,1528915212.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:12.806Z,1528915212.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:13.204Z,1528915213.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:13.604Z,1528915213.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:14.007Z,1528915214.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:14.411Z,1528915214.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:14.808Z,1528915214.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:15.202Z,1528915215.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:15.608Z,1528915215.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:16.003Z,1528915216.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:16.403Z,1528915216.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:16.804Z,1528915216.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:17.208Z,1528915217.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:17.616Z,1528915217.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:18.012Z,1528915218.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:18.404Z,1528915218.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:18.814Z,1528915218.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:19.208Z,1528915219.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:19.604Z,1528915219.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:20.012Z,1528915220.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:20.420Z,1528915220.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:20.816Z,1528915220.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:21.203Z,1528915221.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:21.605Z,1528915221.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:22.004Z,1528915222.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:22.410Z,1528915222.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:22.803Z,1528915222.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:23.218Z,1528915223.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:23.612Z,1528915223.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:24.012Z,1528915224.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:24.412Z,1528915224.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:24.806Z,1528915224.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:25.204Z,1528915225.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:25.604Z,1528915225.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:26.020Z,1528915226.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:26.420Z,1528915226.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:26.820Z,1528915226.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:27.204Z,1528915227.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:27.604Z,1528915227.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:28.004Z,1528915228.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:28.408Z,1528915228.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:28.805Z,1528915228.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:29.220Z,1528915229.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:29.624Z,1528915229.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:30.018Z,1528915230.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:30.404Z,1528915230.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:30.807Z,1528915230.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:31.215Z,1528915231.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:31.604Z,1528915231.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:32.020Z,1528915232.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:32.416Z,1528915232.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:32.817Z,1528915232.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:33.218Z,1528915233.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:33.611Z,1528915233.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:34.011Z,1528915234.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:34.410Z,1528915234.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:34.811Z,1528915234.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:35.214Z,1528915235.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:35.619Z,1528915235.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:36.018Z,1528915236.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:36.411Z,1528915236.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:36.825Z,1528915236.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:37.209Z,1528915237.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:37.620Z,1528915237.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:38.030Z,1528915238.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:38.419Z,1528915238.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:38.827Z,1528915238.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:39.200Z,1528915239.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:39.596Z,1528915239.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:40.004Z,1528915240.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:40.401Z,1528915240.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:40.800Z,1528915240.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:41.228Z,1528915241.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:41.628Z,1528915241.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:42.007Z,1528915242.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:42.400Z,1528915242.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:42.801Z,1528915242.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:43.200Z,1528915243.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:43.600Z,1528915243.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:44.029Z,1528915244.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:44.411Z,1528915244.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:44.807Z,1528915244.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:45.202Z,1528915245.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:45.604Z,1528915245.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:46.001Z,1528915246.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:46.402Z,1528915246.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:46.799Z,1528915246.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:47.207Z,1528915247.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:47.612Z,1528915247.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:48.007Z,1528915248.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:48.402Z,1528915248.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:48.800Z,1528915248.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:49.199Z,1528915249.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:49.601Z,1528915249.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:50.008Z,1528915250.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:50.406Z,1528915250.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:50.807Z,1528915250.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:51.202Z,1528915251.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:51.599Z,1528915251.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:52.002Z,1528915252.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:52.403Z,1528915252.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:52.802Z,1528915252.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:53.211Z,1528915253.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:53.611Z,1528915253.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:54.007Z,1528915254.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:54.402Z,1528915254.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:54.802Z,1528915254.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:55.207Z,1528915255.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:55.601Z,1528915255.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:56.008Z,1528915256.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:56.407Z,1528915256.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:56.807Z,1528915256.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:57.202Z,1528915257.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:57.599Z,1528915257.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:58.002Z,1528915258.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:58.408Z,1528915258.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:58.799Z,1528915258.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:59.208Z,1528915259.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:40:59.611Z,1528915259.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:00.011Z,1528915260.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:00.402Z,1528915260.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:00.802Z,1528915260.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:01.199Z,1528915261.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:01.603Z,1528915261.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:02.041Z,1528915262.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:02.415Z,1528915262.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:02.811Z,1528915262.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:03.206Z,1528915263.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:03.603Z,1528915263.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:04.006Z,1528915264.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:04.407Z,1528915264.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:04.803Z,1528915264.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:04.807Z,1528915264.807 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T18:36:04.8Z
2018-06-13T18:41:04.807Z,1528915264.807 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T18:41:04.807Z,1528915264.807 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T18:41:05.211Z,1528915265.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:09.112Z,1528915269.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:09.217Z,1528915269.217 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0352.lzma
2018-06-13T18:41:09.291Z,1528915269.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:09.663Z,1528915269.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:10.018Z,1528915270.018 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0352.lzma.bak
2018-06-13T18:41:10.018Z,1528915270.018 [DataOverHttps](INFO): SBD MOMSN=8329735
2018-06-13T18:41:10.088Z,1528915270.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:11.943Z,1528915271.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:12.096Z,1528915272.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:15.212Z,1528915275.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:15.415Z,1528915275.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:15.790Z,1528915275.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:16.188Z,1528915276.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:16.619Z,1528915276.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:17.036Z,1528915277.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:17.498Z,1528915277.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:17.777Z,1528915277.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:18.302Z,1528915278.302 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:18.302Z,1528915278.302 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 304
2018-06-13T18:41:18.303Z,1528915278.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:41:18.304Z,1528915278.304 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:18.304Z,1528915278.304 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 304
2018-06-13T18:41:18.304Z,1528915278.304 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:41:18.306Z,1528915278.306 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:18.307Z,1528915278.307 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 304
2018-06-13T18:41:18.307Z,1528915278.307 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:41:18.429Z,1528915278.429 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:41:18.429Z,1528915278.429 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:41:18.430Z,1528915278.430 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:41:21.461Z,1528915281.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:41:21.461Z,1528915281.461 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 304
2018-06-13T18:41:21.462Z,1528915281.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:41:21.462Z,1528915281.462 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 304
2018-06-13T18:41:21.462Z,1528915281.462 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:41:21.462Z,1528915281.462 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 304
2018-06-13T18:41:21.489Z,1528915281.489 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180613T032335/Express0353.lzma
2018-06-13T18:41:21.604Z,1528915281.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:41:21.609Z,1528915281.609 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:41:21.609Z,1528915281.609 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:41:21.610Z,1528915281.610 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:41:21.610Z,1528915281.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:41:21.610Z,1528915281.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:41:21.611Z,1528915281.611 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:41:21.611Z,1528915281.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:41:21.611Z,1528915281.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:41:21.926Z,1528915281.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:41:21.927Z,1528915281.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:22.270Z,1528915282.270 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0353.lzma.bak
2018-06-13T18:41:22.270Z,1528915282.270 [DataOverHttps](INFO): SBD MOMSN=8329737
2018-06-13T18:41:22.364Z,1528915282.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T18:41:22.365Z,1528915282.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:24.215Z,1528915284.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T18:41:24.216Z,1528915284.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:24.219Z,1528915284.219 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T18:41:24.219Z,1528915284.219 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T18:41:24.219Z,1528915284.219 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T18:41:24.377Z,1528915284.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T18:41:24.378Z,1528915284.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:27.542Z,1528915287.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:41:27.543Z,1528915287.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:27.732Z,1528915287.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T18:41:27.733Z,1528915287.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:28.107Z,1528915288.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T18:41:28.108Z,1528915288.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:28.514Z,1528915288.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T18:41:28.515Z,1528915288.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:28.891Z,1528915288.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T18:41:28.892Z,1528915288.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:29.323Z,1528915289.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T18:41:29.324Z,1528915289.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:29.728Z,1528915289.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T18:41:29.729Z,1528915289.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:30.103Z,1528915290.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-06-13T18:41:30.104Z,1528915290.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:30.500Z,1528915290.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T18:41:30.501Z,1528915290.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:30.904Z,1528915290.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T18:41:30.905Z,1528915290.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:31.294Z,1528915291.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T18:41:31.295Z,1528915291.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:31.700Z,1528915291.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T18:41:31.701Z,1528915291.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:32.107Z,1528915292.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T18:41:32.108Z,1528915292.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:32.504Z,1528915292.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T18:41:32.505Z,1528915292.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:32.908Z,1528915292.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T18:41:32.909Z,1528915292.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:33.299Z,1528915293.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T18:41:33.300Z,1528915293.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:33.695Z,1528915293.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T18:41:33.696Z,1528915293.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:34.098Z,1528915294.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T18:41:34.099Z,1528915294.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:34.500Z,1528915294.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T18:41:34.501Z,1528915294.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:34.895Z,1528915294.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T18:41:34.896Z,1528915294.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:35.307Z,1528915295.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T18:41:35.307Z,1528915295.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:35.707Z,1528915295.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T18:41:35.708Z,1528915295.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:36.103Z,1528915296.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T18:41:36.104Z,1528915296.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:36.500Z,1528915296.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T18:41:36.501Z,1528915296.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:36.899Z,1528915296.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T18:41:36.900Z,1528915296.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:37.306Z,1528915297.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T18:41:37.307Z,1528915297.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:37.697Z,1528915297.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T18:41:37.698Z,1528915297.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:38.107Z,1528915298.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T18:41:38.108Z,1528915298.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:38.508Z,1528915298.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:38.908Z,1528915298.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:39.301Z,1528915299.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:39.696Z,1528915299.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:40.099Z,1528915300.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:40.505Z,1528915300.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:40.896Z,1528915300.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:41.309Z,1528915301.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:41.707Z,1528915301.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:42.104Z,1528915302.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:42.499Z,1528915302.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:42.899Z,1528915302.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:43.296Z,1528915303.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:43.698Z,1528915303.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:44.107Z,1528915304.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:44.508Z,1528915304.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:44.908Z,1528915304.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:45.299Z,1528915305.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:45.696Z,1528915305.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:46.100Z,1528915306.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:46.501Z,1528915306.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:46.897Z,1528915306.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:47.304Z,1528915307.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:47.707Z,1528915307.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:48.103Z,1528915308.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:48.504Z,1528915308.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:48.904Z,1528915308.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:49.296Z,1528915309.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:49.704Z,1528915309.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:50.107Z,1528915310.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:50.508Z,1528915310.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:50.908Z,1528915310.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:51.299Z,1528915311.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:51.696Z,1528915311.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:52.099Z,1528915312.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:52.499Z,1528915312.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:52.896Z,1528915312.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:53.308Z,1528915313.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:53.707Z,1528915313.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:54.103Z,1528915314.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:54.499Z,1528915314.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:54.899Z,1528915314.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:55.296Z,1528915315.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:55.700Z,1528915315.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:56.107Z,1528915316.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:56.586Z,1528915316.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:56.908Z,1528915316.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:57.372Z,1528915317.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:57.785Z,1528915317.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:58.112Z,1528915318.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:58.646Z,1528915318.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:58.900Z,1528915318.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:59.324Z,1528915319.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:41:59.730Z,1528915319.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:00.107Z,1528915320.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:00.497Z,1528915320.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:00.895Z,1528915320.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:01.295Z,1528915321.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:01.701Z,1528915321.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:02.107Z,1528915322.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:02.504Z,1528915322.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:02.904Z,1528915322.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:03.297Z,1528915323.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:03.705Z,1528915323.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:04.099Z,1528915324.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:04.500Z,1528915324.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:04.899Z,1528915324.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:05.314Z,1528915325.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:05.715Z,1528915325.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:06.106Z,1528915326.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:06.501Z,1528915326.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:06.902Z,1528915326.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:07.303Z,1528915327.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:07.708Z,1528915327.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:08.114Z,1528915328.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:08.512Z,1528915328.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:08.909Z,1528915328.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:09.303Z,1528915329.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:09.706Z,1528915329.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:10.100Z,1528915330.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:10.507Z,1528915330.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:10.905Z,1528915330.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:11.309Z,1528915331.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:11.709Z,1528915331.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:12.108Z,1528915332.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:12.512Z,1528915332.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:12.907Z,1528915332.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:13.304Z,1528915333.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:13.700Z,1528915333.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:14.117Z,1528915334.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:14.508Z,1528915334.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:14.909Z,1528915334.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:15.302Z,1528915335.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:15.706Z,1528915335.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:16.100Z,1528915336.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:16.503Z,1528915336.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:16.906Z,1528915336.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:17.309Z,1528915337.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:17.712Z,1528915337.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:18.105Z,1528915338.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:18.500Z,1528915338.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:18.903Z,1528915338.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:19.301Z,1528915339.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:19.700Z,1528915339.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:20.109Z,1528915340.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:20.513Z,1528915340.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:20.909Z,1528915340.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:21.314Z,1528915341.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:21.701Z,1528915341.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:22.099Z,1528915342.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:22.507Z,1528915342.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:22.900Z,1528915342.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:23.309Z,1528915343.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:23.710Z,1528915343.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:24.110Z,1528915344.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:24.508Z,1528915344.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:24.906Z,1528915344.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:28.005Z,1528915348.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:28.152Z,1528915348.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:28.562Z,1528915348.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:28.961Z,1528915348.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:29.355Z,1528915349.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:29.752Z,1528915349.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:30.152Z,1528915350.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:30.549Z,1528915350.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:30.958Z,1528915350.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:31.357Z,1528915351.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:31.758Z,1528915351.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:32.160Z,1528915352.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:32.556Z,1528915352.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:32.953Z,1528915352.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:33.356Z,1528915353.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:33.752Z,1528915353.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:34.153Z,1528915354.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:34.559Z,1528915354.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:34.957Z,1528915354.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:35.359Z,1528915355.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:35.750Z,1528915355.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:36.156Z,1528915356.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:36.557Z,1528915356.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:36.955Z,1528915356.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:37.358Z,1528915357.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:37.757Z,1528915357.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:38.163Z,1528915358.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:38.548Z,1528915358.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:38.956Z,1528915358.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:39.338Z,1528915359.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:39.739Z,1528915359.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:40.158Z,1528915360.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:40.570Z,1528915360.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:40.957Z,1528915360.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:41.339Z,1528915361.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:41.753Z,1528915361.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:42.160Z,1528915362.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:42.537Z,1528915362.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:42.969Z,1528915362.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:43.366Z,1528915363.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:43.762Z,1528915363.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:44.169Z,1528915364.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:44.540Z,1528915364.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:44.941Z,1528915364.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:45.342Z,1528915365.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:45.737Z,1528915365.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:46.168Z,1528915366.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:46.565Z,1528915366.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:46.964Z,1528915366.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:47.340Z,1528915367.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:47.740Z,1528915367.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:48.136Z,1528915368.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:48.542Z,1528915368.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:48.941Z,1528915368.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:49.347Z,1528915369.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:49.767Z,1528915369.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:50.151Z,1528915370.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:50.540Z,1528915370.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:50.948Z,1528915370.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:51.349Z,1528915371.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:51.744Z,1528915371.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:52.148Z,1528915372.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:52.556Z,1528915372.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:52.949Z,1528915372.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:53.349Z,1528915373.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:53.756Z,1528915373.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:54.142Z,1528915374.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:54.553Z,1528915374.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:54.952Z,1528915374.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:55.356Z,1528915375.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:55.756Z,1528915375.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:56.152Z,1528915376.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:56.542Z,1528915376.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:56.956Z,1528915376.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:57.348Z,1528915377.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:57.743Z,1528915377.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:58.153Z,1528915378.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:58.557Z,1528915378.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:58.953Z,1528915378.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:59.352Z,1528915379.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:42:59.758Z,1528915379.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:00.144Z,1528915380.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:00.546Z,1528915380.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:00.945Z,1528915380.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:01.349Z,1528915381.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:01.757Z,1528915381.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:02.158Z,1528915382.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:02.551Z,1528915382.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:02.944Z,1528915382.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:03.356Z,1528915383.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:03.750Z,1528915383.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:04.153Z,1528915384.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:04.558Z,1528915384.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:04.953Z,1528915384.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:05.349Z,1528915385.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:05.756Z,1528915385.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:06.154Z,1528915386.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:06.549Z,1528915386.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:06.953Z,1528915386.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:07.362Z,1528915387.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:07.758Z,1528915387.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:08.166Z,1528915388.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:08.536Z,1528915388.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:08.940Z,1528915388.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:09.321Z,1528915389.321 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:09.365Z,1528915389.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:09.722Z,1528915389.722 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:09.740Z,1528915389.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:10.126Z,1528915390.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:10.167Z,1528915390.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:10.533Z,1528915390.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:10.551Z,1528915390.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:10.930Z,1528915390.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:10.948Z,1528915390.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:11.326Z,1528915391.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:11.344Z,1528915391.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:11.725Z,1528915391.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:11.743Z,1528915391.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:12.119Z,1528915392.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:12.142Z,1528915392.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:12.524Z,1528915392.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:12.542Z,1528915392.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:12.926Z,1528915392.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:12.952Z,1528915392.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:13.330Z,1528915393.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:13.356Z,1528915393.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:13.733Z,1528915393.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:13.751Z,1528915393.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:14.134Z,1528915394.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:14.152Z,1528915394.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:14.525Z,1528915394.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:14.543Z,1528915394.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:14.923Z,1528915394.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:14.955Z,1528915394.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:15.326Z,1528915395.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:15.344Z,1528915395.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:15.724Z,1528915395.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:15.748Z,1528915395.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:16.134Z,1528915396.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:16.152Z,1528915396.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:16.537Z,1528915396.537 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:16.555Z,1528915396.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:16.931Z,1528915396.931 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:16.956Z,1528915396.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:17.323Z,1528915397.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:17.354Z,1528915397.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:17.730Z,1528915397.730 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:17.748Z,1528915397.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:18.134Z,1528915398.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:18.152Z,1528915398.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:18.533Z,1528915398.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:18.551Z,1528915398.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:18.934Z,1528915398.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:18.952Z,1528915398.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:19.325Z,1528915399.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:19.343Z,1528915399.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:19.728Z,1528915399.728 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:19.746Z,1528915399.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:20.134Z,1528915400.134 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:20.152Z,1528915400.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:20.534Z,1528915400.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:20.551Z,1528915400.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:20.934Z,1528915400.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:20.959Z,1528915400.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:21.330Z,1528915401.330 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:21.352Z,1528915401.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:21.727Z,1528915401.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:21.745Z,1528915401.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:22.135Z,1528915402.135 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:22.153Z,1528915402.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:22.536Z,1528915402.536 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:22.554Z,1528915402.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:22.935Z,1528915402.935 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:22.953Z,1528915402.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:23.325Z,1528915403.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:23.355Z,1528915403.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:23.726Z,1528915403.726 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:23.759Z,1528915403.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:24.132Z,1528915404.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:24.157Z,1528915404.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:24.538Z,1528915404.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:24.556Z,1528915404.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:24.940Z,1528915404.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:24.958Z,1528915404.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:28.031Z,1528915408.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:28.050Z,1528915408.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:28.163Z,1528915408.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:28.188Z,1528915408.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:28.582Z,1528915408.582 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:28.605Z,1528915408.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:28.977Z,1528915408.977 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:28.995Z,1528915408.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:29.374Z,1528915409.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:29.398Z,1528915409.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:29.751Z,1528915409.751 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:29.789Z,1528915409.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:30.151Z,1528915410.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:30.169Z,1528915410.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:30.556Z,1528915410.556 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:30.574Z,1528915410.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:30.959Z,1528915410.959 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:30.977Z,1528915410.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:31.365Z,1528915411.365 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:31.383Z,1528915411.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:31.765Z,1528915411.765 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:31.783Z,1528915411.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:32.173Z,1528915412.173 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:32.208Z,1528915412.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:32.561Z,1528915412.561 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:32.580Z,1528915412.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:32.958Z,1528915412.958 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:32.987Z,1528915412.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:33.360Z,1528915413.360 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:33.387Z,1528915413.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:33.761Z,1528915413.761 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:33.779Z,1528915413.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:34.166Z,1528915414.166 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:34.184Z,1528915414.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:34.570Z,1528915414.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:34.588Z,1528915414.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:34.967Z,1528915414.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:34.985Z,1528915414.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:35.366Z,1528915415.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:35.384Z,1528915415.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:35.762Z,1528915415.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:35.780Z,1528915415.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:36.155Z,1528915416.155 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:36.178Z,1528915416.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:36.562Z,1528915416.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:36.579Z,1528915416.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:36.966Z,1528915416.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:36.984Z,1528915416.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:37.371Z,1528915417.371 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:37.396Z,1528915417.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:37.770Z,1528915417.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:37.788Z,1528915417.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:38.171Z,1528915418.171 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:38.189Z,1528915418.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:38.562Z,1528915418.562 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:38.580Z,1528915418.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:38.965Z,1528915418.965 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:43:38.982Z,1528915418.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:39.394Z,1528915419.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:39.776Z,1528915419.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:40.196Z,1528915420.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:40.592Z,1528915420.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:40.984Z,1528915420.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:41.380Z,1528915421.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:41.785Z,1528915421.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:42.192Z,1528915422.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:42.591Z,1528915422.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:43.000Z,1528915423.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:43.382Z,1528915423.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:43.782Z,1528915423.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:44.194Z,1528915424.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:44.588Z,1528915424.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:44.996Z,1528915424.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:45.384Z,1528915425.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:45.780Z,1528915425.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:46.189Z,1528915426.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:46.593Z,1528915426.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:46.994Z,1528915426.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:47.388Z,1528915427.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:47.785Z,1528915427.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:48.188Z,1528915428.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:48.592Z,1528915428.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:48.998Z,1528915428.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:49.389Z,1528915429.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:49.792Z,1528915429.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:50.194Z,1528915430.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:50.591Z,1528915430.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:50.990Z,1528915430.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:51.387Z,1528915431.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:51.784Z,1528915431.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:52.193Z,1528915432.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:52.605Z,1528915432.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:52.992Z,1528915432.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:53.394Z,1528915433.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:53.792Z,1528915433.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:54.191Z,1528915434.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:54.597Z,1528915434.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:54.994Z,1528915434.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:55.390Z,1528915435.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:55.811Z,1528915435.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:56.196Z,1528915436.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:56.600Z,1528915436.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:56.993Z,1528915436.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:57.392Z,1528915437.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:57.786Z,1528915437.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:58.211Z,1528915438.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:58.599Z,1528915438.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:58.993Z,1528915438.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:59.392Z,1528915439.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:43:59.790Z,1528915439.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:00.191Z,1528915440.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:00.604Z,1528915440.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:00.998Z,1528915440.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:01.390Z,1528915441.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:01.790Z,1528915441.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:02.194Z,1528915442.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:02.598Z,1528915442.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:02.993Z,1528915442.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:03.393Z,1528915443.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:03.793Z,1528915443.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:04.196Z,1528915444.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:04.605Z,1528915444.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:05.004Z,1528915445.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:05.398Z,1528915445.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:05.804Z,1528915445.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:06.198Z,1528915446.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:06.605Z,1528915446.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:07.004Z,1528915447.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:07.404Z,1528915447.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:07.802Z,1528915447.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:08.209Z,1528915448.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:08.601Z,1528915448.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:09.012Z,1528915449.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:09.407Z,1528915449.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:09.806Z,1528915449.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:10.217Z,1528915450.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:10.610Z,1528915450.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:10.993Z,1528915450.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:11.386Z,1528915451.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:11.785Z,1528915451.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:12.218Z,1528915452.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:12.592Z,1528915452.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:12.991Z,1528915452.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:13.384Z,1528915453.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:13.798Z,1528915453.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:14.193Z,1528915454.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:14.596Z,1528915454.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:14.992Z,1528915454.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:15.395Z,1528915455.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:15.788Z,1528915455.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:16.192Z,1528915456.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:16.601Z,1528915456.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:17.008Z,1528915457.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:17.394Z,1528915457.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:17.788Z,1528915457.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:18.190Z,1528915458.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:18.579Z,1528915458.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:18.982Z,1528915458.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:19.389Z,1528915459.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:19.799Z,1528915459.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:20.207Z,1528915460.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:20.589Z,1528915460.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:20.985Z,1528915460.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:21.381Z,1528915461.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:21.778Z,1528915461.778 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:21.778Z,1528915461.778 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 305
2018-06-13T18:44:21.778Z,1528915461.778 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:44:21.780Z,1528915461.780 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:21.780Z,1528915461.780 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 305
2018-06-13T18:44:21.780Z,1528915461.780 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:44:21.786Z,1528915461.786 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:21.786Z,1528915461.786 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 305
2018-06-13T18:44:21.787Z,1528915461.787 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:44:21.877Z,1528915461.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:44:21.877Z,1528915461.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:44:21.878Z,1528915461.878 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:44:22.277Z,1528915462.277 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:44:22.277Z,1528915462.277 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 305
2018-06-13T18:44:22.278Z,1528915462.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:44:22.278Z,1528915462.278 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 305
2018-06-13T18:44:22.278Z,1528915462.278 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:44:22.278Z,1528915462.278 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 305
2018-06-13T18:44:22.603Z,1528915462.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:44:22.604Z,1528915462.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:44:22.604Z,1528915462.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:44:22.605Z,1528915462.605 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:44:22.605Z,1528915462.605 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:44:22.605Z,1528915462.605 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:44:22.606Z,1528915462.606 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:44:22.606Z,1528915462.606 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:44:22.606Z,1528915462.606 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:44:23.010Z,1528915463.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:44:23.011Z,1528915463.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:23.412Z,1528915463.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:44:23.413Z,1528915463.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:23.798Z,1528915463.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:44:23.799Z,1528915463.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:24.190Z,1528915464.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:44:24.191Z,1528915464.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:24.599Z,1528915464.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:44:24.600Z,1528915464.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:24.972Z,1528915464.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:44:24.973Z,1528915464.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:28.104Z,1528915468.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T18:44:28.105Z,1528915468.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:28.268Z,1528915468.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T18:44:28.273Z,1528915468.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:28.656Z,1528915468.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T18:44:28.656Z,1528915468.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:29.061Z,1528915469.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T18:44:29.062Z,1528915469.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:29.436Z,1528915469.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T18:44:29.437Z,1528915469.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:29.839Z,1528915469.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T18:44:29.840Z,1528915469.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:30.268Z,1528915470.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T18:44:30.269Z,1528915470.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:30.659Z,1528915470.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T18:44:30.660Z,1528915470.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:31.028Z,1528915471.028 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:44:31.063Z,1528915471.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T18:44:31.064Z,1528915471.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:31.420Z,1528915471.420 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:44:31.460Z,1528915471.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T18:44:31.465Z,1528915471.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:31.822Z,1528915471.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:44:31.840Z,1528915471.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T18:44:31.842Z,1528915471.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:32.233Z,1528915472.233 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:44:32.270Z,1528915472.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T18:44:32.271Z,1528915472.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:32.629Z,1528915472.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:44:32.647Z,1528915472.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T18:44:32.648Z,1528915472.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:33.031Z,1528915473.031 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:44:33.048Z,1528915473.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T18:44:33.049Z,1528915473.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:33.424Z,1528915473.424 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:44:33.441Z,1528915473.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T18:44:33.442Z,1528915473.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:33.824Z,1528915473.824 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:44:33.841Z,1528915473.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T18:44:33.842Z,1528915473.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:34.229Z,1528915474.229 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:44:34.247Z,1528915474.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T18:44:34.248Z,1528915474.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:34.650Z,1528915474.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T18:44:34.651Z,1528915474.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:35.048Z,1528915475.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T18:44:35.049Z,1528915475.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:35.443Z,1528915475.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T18:44:35.444Z,1528915475.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:35.821Z,1528915475.821 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:44:35.838Z,1528915475.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T18:44:35.839Z,1528915475.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:36.232Z,1528915476.232 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:44:36.250Z,1528915476.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T18:44:36.251Z,1528915476.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:36.630Z,1528915476.630 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:44:36.649Z,1528915476.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T18:44:36.650Z,1528915476.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:37.048Z,1528915477.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T18:44:37.048Z,1528915477.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:37.444Z,1528915477.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T18:44:37.446Z,1528915477.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:37.843Z,1528915477.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T18:44:37.844Z,1528915477.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:38.249Z,1528915478.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T18:44:38.250Z,1528915478.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:38.647Z,1528915478.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T18:44:38.648Z,1528915478.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:39.047Z,1528915479.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T18:44:39.048Z,1528915479.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:39.446Z,1528915479.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T18:44:39.447Z,1528915479.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:39.843Z,1528915479.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T18:44:39.843Z,1528915479.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:40.247Z,1528915480.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T18:44:40.248Z,1528915480.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:40.646Z,1528915480.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T18:44:40.647Z,1528915480.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:41.072Z,1528915481.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T18:44:41.073Z,1528915481.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:41.443Z,1528915481.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T18:44:41.444Z,1528915481.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:41.849Z,1528915481.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:42.252Z,1528915482.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:42.655Z,1528915482.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:43.057Z,1528915483.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:43.444Z,1528915483.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:43.852Z,1528915483.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:44.264Z,1528915484.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:44.664Z,1528915484.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:45.055Z,1528915485.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:45.446Z,1528915485.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:45.860Z,1528915485.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:46.264Z,1528915486.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:46.664Z,1528915486.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:47.052Z,1528915487.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:47.460Z,1528915487.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:47.857Z,1528915487.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:48.259Z,1528915488.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:48.655Z,1528915488.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:49.084Z,1528915489.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:49.456Z,1528915489.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:49.854Z,1528915489.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:50.272Z,1528915490.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:50.679Z,1528915490.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:51.080Z,1528915491.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:51.457Z,1528915491.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:51.845Z,1528915491.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:52.278Z,1528915492.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:52.682Z,1528915492.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:53.058Z,1528915493.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:53.448Z,1528915493.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:53.860Z,1528915493.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:54.259Z,1528915494.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:54.660Z,1528915494.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:55.059Z,1528915495.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:55.461Z,1528915495.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:55.857Z,1528915495.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:56.259Z,1528915496.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:56.652Z,1528915496.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:57.073Z,1528915497.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:57.460Z,1528915497.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:57.848Z,1528915497.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:58.250Z,1528915498.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:58.646Z,1528915498.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:59.037Z,1528915499.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:59.460Z,1528915499.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:44:59.868Z,1528915499.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:00.266Z,1528915500.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:00.654Z,1528915500.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:01.067Z,1528915501.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:01.441Z,1528915501.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:01.837Z,1528915501.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:02.236Z,1528915502.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:02.666Z,1528915502.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:03.068Z,1528915503.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:03.472Z,1528915503.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:03.840Z,1528915503.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:04.240Z,1528915504.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:04.643Z,1528915504.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:05.040Z,1528915505.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:05.467Z,1528915505.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:05.852Z,1528915505.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:06.249Z,1528915506.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:06.639Z,1528915506.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:07.040Z,1528915507.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:07.436Z,1528915507.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:07.857Z,1528915507.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:08.239Z,1528915508.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:08.644Z,1528915508.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:09.049Z,1528915509.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:09.455Z,1528915509.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:09.839Z,1528915509.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:10.244Z,1528915510.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:10.646Z,1528915510.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:11.039Z,1528915511.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:11.452Z,1528915511.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:11.853Z,1528915511.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:12.249Z,1528915512.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:12.651Z,1528915512.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:13.052Z,1528915513.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:13.441Z,1528915513.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:13.842Z,1528915513.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:14.244Z,1528915514.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:14.649Z,1528915514.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:15.053Z,1528915515.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:15.463Z,1528915515.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:15.836Z,1528915515.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:16.248Z,1528915516.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:16.648Z,1528915516.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:17.042Z,1528915517.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:17.456Z,1528915517.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:17.860Z,1528915517.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:18.254Z,1528915518.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:18.642Z,1528915518.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:19.044Z,1528915519.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:19.437Z,1528915519.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:19.842Z,1528915519.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:20.244Z,1528915520.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:20.653Z,1528915520.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:21.060Z,1528915521.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:21.460Z,1528915521.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:21.837Z,1528915521.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:22.248Z,1528915522.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:22.647Z,1528915522.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:23.041Z,1528915523.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:23.453Z,1528915523.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:23.860Z,1528915523.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:24.245Z,1528915524.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:24.641Z,1528915524.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:25.052Z,1528915525.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:28.147Z,1528915528.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:28.286Z,1528915528.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:28.711Z,1528915528.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:29.119Z,1528915529.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:29.488Z,1528915529.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:29.887Z,1528915529.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:30.282Z,1528915530.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:30.680Z,1528915530.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:31.090Z,1528915531.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:31.494Z,1528915531.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:31.896Z,1528915531.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:32.316Z,1528915532.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:32.678Z,1528915532.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:33.080Z,1528915533.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:33.488Z,1528915533.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:33.879Z,1528915533.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:34.280Z,1528915534.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:34.691Z,1528915534.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:35.094Z,1528915535.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:35.493Z,1528915535.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:35.893Z,1528915535.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:36.281Z,1528915536.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:36.683Z,1528915536.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:37.088Z,1528915537.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:37.495Z,1528915537.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:37.895Z,1528915537.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:38.300Z,1528915538.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:38.686Z,1528915538.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:39.081Z,1528915539.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:39.486Z,1528915539.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:39.880Z,1528915539.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:40.281Z,1528915540.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:40.703Z,1528915540.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:41.089Z,1528915541.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:41.487Z,1528915541.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:41.894Z,1528915541.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:42.287Z,1528915542.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:42.685Z,1528915542.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:43.095Z,1528915543.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:43.487Z,1528915543.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:43.892Z,1528915543.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:44.294Z,1528915544.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:44.686Z,1528915544.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:45.088Z,1528915545.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:45.485Z,1528915545.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:45.892Z,1528915545.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:46.273Z,1528915546.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:46.701Z,1528915546.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:47.108Z,1528915547.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:47.500Z,1528915547.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:47.876Z,1528915547.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:48.276Z,1528915548.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:48.680Z,1528915548.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:49.080Z,1528915549.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:49.483Z,1528915549.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:49.906Z,1528915549.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:50.287Z,1528915550.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:50.688Z,1528915550.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:51.080Z,1528915551.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:51.482Z,1528915551.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:51.879Z,1528915551.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:52.302Z,1528915552.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:52.696Z,1528915552.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:53.092Z,1528915553.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:53.487Z,1528915553.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:53.883Z,1528915553.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:54.276Z,1528915554.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:54.679Z,1528915554.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:55.082Z,1528915555.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:55.488Z,1528915555.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:55.892Z,1528915555.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:56.288Z,1528915556.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:56.676Z,1528915556.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:57.078Z,1528915557.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:57.479Z,1528915557.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:57.878Z,1528915557.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:58.278Z,1528915558.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:58.689Z,1528915558.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:59.088Z,1528915559.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:59.492Z,1528915559.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:45:59.884Z,1528915559.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:00.276Z,1528915560.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:00.694Z,1528915560.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:01.093Z,1528915561.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:01.489Z,1528915561.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:01.893Z,1528915561.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:02.295Z,1528915562.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:02.690Z,1528915562.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:03.086Z,1528915563.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:03.488Z,1528915563.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:03.885Z,1528915563.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:04.289Z,1528915564.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:04.695Z,1528915564.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:05.091Z,1528915565.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:05.489Z,1528915565.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:05.890Z,1528915565.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:06.288Z,1528915566.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:06.696Z,1528915566.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:07.073Z,1528915567.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:07.498Z,1528915567.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:07.904Z,1528915567.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:08.307Z,1528915568.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:08.680Z,1528915568.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:09.077Z,1528915569.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:09.484Z,1528915569.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:09.877Z,1528915569.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:10.282Z,1528915570.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:10.703Z,1528915570.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:11.087Z,1528915571.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:11.484Z,1528915571.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:11.879Z,1528915571.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:12.279Z,1528915572.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:12.685Z,1528915572.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:13.076Z,1528915573.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:13.481Z,1528915573.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:13.892Z,1528915573.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:14.284Z,1528915574.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:14.676Z,1528915574.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:15.078Z,1528915575.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:15.477Z,1528915575.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:15.875Z,1528915575.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:16.288Z,1528915576.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:16.686Z,1528915576.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:17.083Z,1528915577.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:17.483Z,1528915577.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:17.878Z,1528915577.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:18.288Z,1528915578.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:18.680Z,1528915578.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:19.081Z,1528915579.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:19.484Z,1528915579.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:19.887Z,1528915579.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:20.284Z,1528915580.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:20.676Z,1528915580.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:21.080Z,1528915581.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:21.479Z,1528915581.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:21.875Z,1528915581.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:22.279Z,1528915582.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:22.683Z,1528915582.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:23.088Z,1528915583.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:23.483Z,1528915583.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:23.882Z,1528915583.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:24.278Z,1528915584.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:24.682Z,1528915584.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:24.685Z,1528915584.685 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T18:46:24.686Z,1528915584.686 [Default:CheckIn:C.Wait] Stopped
2018-06-13T18:46:24.686Z,1528915584.686 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T18:46:24.686Z,1528915584.686 [Default:CheckIn:D] Running Loop=1
2018-06-13T18:46:25.083Z,1528915585.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:25.086Z,1528915585.086 [Default:CheckIn:D] Stopped
2018-06-13T18:46:25.086Z,1528915585.086 [Default:CheckIn:E] Running Loop=1
2018-06-13T18:46:25.492Z,1528915585.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:25.495Z,1528915585.495 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 919.194010 min 
2018-06-13T18:46:25.496Z,1528915585.496 [Default:CheckIn:E] Stopped
2018-06-13T18:46:25.496Z,1528915585.496 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T18:46:25.496Z,1528915585.496 [Default:CheckIn] Stopped
2018-06-13T18:46:25.496Z,1528915585.496 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T18:46:25.496Z,1528915585.496 [Default:CheckIn](INFO): Running loop #89
2018-06-13T18:46:25.496Z,1528915585.496 [Default:CheckIn] Running Loop=89
2018-06-13T18:46:25.496Z,1528915585.496 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T18:46:25.496Z,1528915585.496 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T18:46:25.896Z,1528915585.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:26.296Z,1528915586.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:29.392Z,1528915589.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:29.569Z,1528915589.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:29.940Z,1528915589.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:30.340Z,1528915590.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:30.736Z,1528915590.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:31.103Z,1528915591.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:31.136Z,1528915591.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:31.499Z,1528915591.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:31.533Z,1528915591.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:31.904Z,1528915591.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:31.939Z,1528915591.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:32.299Z,1528915592.299 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:32.338Z,1528915592.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:32.709Z,1528915592.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:32.741Z,1528915592.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:33.122Z,1528915593.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:33.140Z,1528915593.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:33.524Z,1528915593.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:33.541Z,1528915593.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:33.899Z,1528915593.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:33.933Z,1528915593.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:34.303Z,1528915594.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:34.336Z,1528915594.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:34.745Z,1528915594.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:35.140Z,1528915595.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:35.546Z,1528915595.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:35.917Z,1528915595.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:35.947Z,1528915595.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:36.317Z,1528915596.317 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:36.344Z,1528915596.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:36.703Z,1528915596.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:36.721Z,1528915596.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:37.107Z,1528915597.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:37.124Z,1528915597.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:37.507Z,1528915597.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:37.524Z,1528915597.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:37.907Z,1528915597.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:37.925Z,1528915597.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:38.305Z,1528915598.305 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:38.323Z,1528915598.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:38.717Z,1528915598.717 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:38.756Z,1528915598.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:39.117Z,1528915599.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:39.155Z,1528915599.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:39.521Z,1528915599.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:39.562Z,1528915599.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:39.906Z,1528915599.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:39.924Z,1528915599.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:40.306Z,1528915600.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:40.324Z,1528915600.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:40.706Z,1528915600.706 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:40.724Z,1528915600.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:41.106Z,1528915601.106 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:41.124Z,1528915601.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:41.521Z,1528915601.521 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:41.555Z,1528915601.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:41.917Z,1528915601.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:41.934Z,1528915601.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:42.314Z,1528915602.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:42.332Z,1528915602.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:42.707Z,1528915602.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:42.724Z,1528915602.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:43.109Z,1528915603.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:43.132Z,1528915603.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:43.508Z,1528915603.508 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:43.526Z,1528915603.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:43.908Z,1528915603.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:43.926Z,1528915603.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:44.309Z,1528915604.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:44.327Z,1528915604.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:44.714Z,1528915604.714 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:44.731Z,1528915604.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:45.117Z,1528915605.117 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:45.135Z,1528915605.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:45.513Z,1528915605.513 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:45.536Z,1528915605.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:45.907Z,1528915605.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:45.932Z,1528915605.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:46.306Z,1528915606.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:46.339Z,1528915606.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:46.708Z,1528915606.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:46.737Z,1528915606.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:47.109Z,1528915607.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:47.127Z,1528915607.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:47.518Z,1528915607.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:47.535Z,1528915607.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:47.918Z,1528915607.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:47.944Z,1528915607.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:48.319Z,1528915608.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:48.344Z,1528915608.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:48.709Z,1528915608.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:48.726Z,1528915608.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:49.107Z,1528915609.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:49.131Z,1528915609.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:49.509Z,1528915609.509 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:49.526Z,1528915609.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:49.903Z,1528915609.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:49.942Z,1528915609.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:50.303Z,1528915610.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:50.337Z,1528915610.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:50.720Z,1528915610.720 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:50.738Z,1528915610.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:51.124Z,1528915611.124 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:51.148Z,1528915611.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:51.525Z,1528915611.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:51.548Z,1528915611.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:51.903Z,1528915611.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:51.935Z,1528915611.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:52.303Z,1528915612.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:52.335Z,1528915612.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:52.704Z,1528915612.704 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:52.744Z,1528915612.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:53.104Z,1528915613.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:53.136Z,1528915613.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:53.520Z,1528915613.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:53.538Z,1528915613.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:53.923Z,1528915613.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:53.952Z,1528915613.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:54.324Z,1528915614.324 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:54.342Z,1528915614.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:54.703Z,1528915614.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:54.739Z,1528915614.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:55.104Z,1528915615.104 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:55.150Z,1528915615.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:55.499Z,1528915615.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:55.533Z,1528915615.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:55.905Z,1528915615.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:55.939Z,1528915615.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:56.304Z,1528915616.304 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:56.347Z,1528915616.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:56.710Z,1528915616.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:56.748Z,1528915616.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:57.118Z,1528915617.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:57.152Z,1528915617.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:57.518Z,1528915617.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:57.552Z,1528915617.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:57.903Z,1528915617.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:57.945Z,1528915617.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:58.303Z,1528915618.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:58.320Z,1528915618.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:58.708Z,1528915618.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:58.742Z,1528915618.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:59.107Z,1528915619.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:59.124Z,1528915619.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:59.517Z,1528915619.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:59.551Z,1528915619.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:46:59.922Z,1528915619.922 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:46:59.963Z,1528915619.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:00.310Z,1528915620.310 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:00.327Z,1528915620.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:00.711Z,1528915620.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:00.728Z,1528915620.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:01.107Z,1528915621.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:01.132Z,1528915621.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:01.504Z,1528915621.504 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:01.522Z,1528915621.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:01.906Z,1528915621.906 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:01.923Z,1528915621.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:02.306Z,1528915622.306 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:02.325Z,1528915622.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:02.710Z,1528915622.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:02.736Z,1528915622.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:03.118Z,1528915623.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:03.135Z,1528915623.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:03.517Z,1528915623.517 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:03.540Z,1528915623.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:03.905Z,1528915623.905 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:03.922Z,1528915623.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:04.309Z,1528915624.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:04.326Z,1528915624.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:04.710Z,1528915624.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:04.736Z,1528915624.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:05.109Z,1528915625.109 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:05.126Z,1528915625.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:05.514Z,1528915625.514 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:05.536Z,1528915625.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:05.917Z,1528915625.917 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:05.935Z,1528915625.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:06.314Z,1528915626.314 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:06.336Z,1528915626.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:06.709Z,1528915626.709 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:06.726Z,1528915626.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:07.110Z,1528915627.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:07.127Z,1528915627.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:07.510Z,1528915627.510 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:07.532Z,1528915627.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:07.907Z,1528915627.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:07.930Z,1528915627.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:08.307Z,1528915628.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:08.332Z,1528915628.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:08.715Z,1528915628.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:08.740Z,1528915628.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:09.118Z,1528915629.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:09.140Z,1528915629.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:09.520Z,1528915629.520 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:09.538Z,1528915629.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:09.909Z,1528915629.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:09.927Z,1528915629.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:10.307Z,1528915630.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:10.330Z,1528915630.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:10.711Z,1528915630.711 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:10.729Z,1528915630.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:11.102Z,1528915631.102 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:11.134Z,1528915631.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:11.519Z,1528915631.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:11.536Z,1528915631.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:11.918Z,1528915631.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:11.936Z,1528915631.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:12.315Z,1528915632.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:12.333Z,1528915632.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:12.707Z,1528915632.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:12.729Z,1528915632.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:13.110Z,1528915633.110 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:13.127Z,1528915633.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:13.503Z,1528915633.503 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:13.526Z,1528915633.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:13.902Z,1528915633.902 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:13.935Z,1528915633.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:14.307Z,1528915634.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:14.332Z,1528915634.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:14.718Z,1528915634.718 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:14.736Z,1528915634.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:15.118Z,1528915635.118 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:15.140Z,1528915635.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:15.518Z,1528915635.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:15.535Z,1528915635.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:15.909Z,1528915635.909 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:15.927Z,1528915635.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:16.307Z,1528915636.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:16.330Z,1528915636.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:16.710Z,1528915636.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:16.728Z,1528915636.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:17.103Z,1528915637.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:17.126Z,1528915637.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:17.515Z,1528915637.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:17.533Z,1528915637.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:17.918Z,1528915637.918 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:17.940Z,1528915637.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:18.315Z,1528915638.315 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:18.335Z,1528915638.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:18.707Z,1528915638.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:18.738Z,1528915638.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:19.107Z,1528915639.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:19.125Z,1528915639.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:19.505Z,1528915639.505 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:19.523Z,1528915639.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:19.907Z,1528915639.907 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:19.929Z,1528915639.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:20.307Z,1528915640.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:20.331Z,1528915640.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:20.715Z,1528915640.715 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:20.732Z,1528915640.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:21.119Z,1528915641.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:21.137Z,1528915641.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:21.518Z,1528915641.518 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:21.544Z,1528915641.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:21.903Z,1528915641.903 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:21.926Z,1528915641.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:22.307Z,1528915642.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:22.329Z,1528915642.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:22.710Z,1528915642.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:22.728Z,1528915642.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:22.728Z,1528915642.728 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 306
2018-06-13T18:47:22.729Z,1528915642.729 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:47:22.730Z,1528915642.730 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:22.731Z,1528915642.731 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 306
2018-06-13T18:47:22.731Z,1528915642.731 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:47:22.732Z,1528915642.732 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:22.732Z,1528915642.732 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 306
2018-06-13T18:47:22.733Z,1528915642.733 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:47:22.809Z,1528915642.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:47:22.809Z,1528915642.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:47:22.810Z,1528915642.810 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:47:23.103Z,1528915643.103 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:23.217Z,1528915643.217 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:47:23.217Z,1528915643.217 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 306
2018-06-13T18:47:23.218Z,1528915643.218 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:47:23.218Z,1528915643.218 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 306
2018-06-13T18:47:23.218Z,1528915643.218 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:47:23.218Z,1528915643.218 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 306
2018-06-13T18:47:23.515Z,1528915643.515 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:23.532Z,1528915643.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:47:23.532Z,1528915643.532 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:47:23.533Z,1528915643.533 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:47:23.533Z,1528915643.533 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:47:23.534Z,1528915643.534 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:47:23.534Z,1528915643.534 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:47:23.534Z,1528915643.534 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:47:23.535Z,1528915643.535 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:47:23.535Z,1528915643.535 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:47:23.932Z,1528915643.932 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:23.950Z,1528915643.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:47:23.951Z,1528915643.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:24.309Z,1528915644.309 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:24.344Z,1528915644.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:47:24.345Z,1528915644.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:24.708Z,1528915644.708 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:24.734Z,1528915644.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:47:24.735Z,1528915644.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:25.107Z,1528915645.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:25.136Z,1528915645.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:47:25.137Z,1528915645.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:25.523Z,1528915645.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:25.548Z,1528915645.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:47:25.548Z,1528915645.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:25.928Z,1528915645.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:25.952Z,1528915645.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:47:25.953Z,1528915645.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:26.328Z,1528915646.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:26.346Z,1528915646.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:47:26.347Z,1528915646.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:26.703Z,1528915646.703 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:26.739Z,1528915646.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:47:26.739Z,1528915646.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:27.107Z,1528915647.107 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:27.133Z,1528915647.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:47:27.134Z,1528915647.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:27.507Z,1528915647.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:27.536Z,1528915647.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:47:27.536Z,1528915647.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:27.908Z,1528915647.908 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:27.936Z,1528915647.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:47:27.937Z,1528915647.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:28.307Z,1528915648.307 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:28.340Z,1528915648.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:47:28.341Z,1528915648.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:28.723Z,1528915648.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:28.756Z,1528915648.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:47:28.758Z,1528915648.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:31.835Z,1528915651.835 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:31.852Z,1528915651.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T18:47:31.853Z,1528915651.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:31.990Z,1528915651.990 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:32.035Z,1528915652.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T18:47:32.036Z,1528915652.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:32.374Z,1528915652.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:32.392Z,1528915652.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T18:47:32.393Z,1528915652.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:32.774Z,1528915652.774 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:32.791Z,1528915652.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T18:47:32.792Z,1528915652.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:33.163Z,1528915653.163 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:47:33.199Z,1528915653.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T18:47:33.200Z,1528915653.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:33.601Z,1528915653.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T18:47:33.602Z,1528915653.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:33.997Z,1528915653.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T18:47:33.998Z,1528915653.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:34.396Z,1528915654.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T18:47:34.397Z,1528915654.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:34.801Z,1528915654.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T18:47:34.802Z,1528915654.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:35.193Z,1528915655.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T18:47:35.194Z,1528915655.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:35.588Z,1528915655.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T18:47:35.589Z,1528915655.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:35.993Z,1528915655.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T18:47:35.994Z,1528915655.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:36.393Z,1528915656.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T18:47:36.394Z,1528915656.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:36.797Z,1528915656.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T18:47:36.798Z,1528915656.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:37.203Z,1528915657.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T18:47:37.206Z,1528915657.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:37.594Z,1528915657.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T18:47:37.595Z,1528915657.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:37.988Z,1528915657.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T18:47:37.989Z,1528915657.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:38.391Z,1528915658.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T18:47:38.392Z,1528915658.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:38.791Z,1528915658.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T18:47:38.792Z,1528915658.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:39.196Z,1528915659.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T18:47:39.197Z,1528915659.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:39.603Z,1528915659.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T18:47:39.604Z,1528915659.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:39.000Z,1528915660.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T18:47:40.001Z,1528915660.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:40.399Z,1528915660.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T18:47:40.400Z,1528915660.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:40.792Z,1528915660.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T18:47:40.794Z,1528915660.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:41.194Z,1528915661.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T18:47:41.195Z,1528915661.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:41.594Z,1528915661.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T18:47:41.594Z,1528915661.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:41.992Z,1528915661.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T18:47:41.993Z,1528915661.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:42.396Z,1528915662.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T18:47:42.397Z,1528915662.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:42.798Z,1528915662.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:43.204Z,1528915663.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:43.611Z,1528915663.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:43.992Z,1528915663.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:44.404Z,1528915664.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:44.795Z,1528915664.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:45.194Z,1528915665.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:45.604Z,1528915665.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:46.002Z,1528915666.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:46.399Z,1528915666.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:46.805Z,1528915666.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:47.197Z,1528915667.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:47.582Z,1528915667.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:47.986Z,1528915667.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:48.384Z,1528915668.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:48.815Z,1528915668.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:49.220Z,1528915669.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:49.595Z,1528915669.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:49.988Z,1528915669.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:50.385Z,1528915670.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:50.782Z,1528915670.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:51.183Z,1528915671.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:51.595Z,1528915671.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:51.995Z,1528915671.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:52.392Z,1528915672.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:52.789Z,1528915672.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:53.191Z,1528915673.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:53.583Z,1528915673.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:53.990Z,1528915673.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:54.383Z,1528915674.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:54.792Z,1528915674.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:55.223Z,1528915675.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:55.591Z,1528915675.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:55.985Z,1528915675.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:56.387Z,1528915676.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:56.786Z,1528915676.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:57.186Z,1528915677.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:57.595Z,1528915677.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:57.991Z,1528915677.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:58.399Z,1528915678.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:58.787Z,1528915678.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:59.183Z,1528915679.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:59.583Z,1528915679.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:47:59.989Z,1528915679.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:00.384Z,1528915680.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:00.791Z,1528915680.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:01.195Z,1528915681.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:01.591Z,1528915681.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:01.987Z,1528915681.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:02.387Z,1528915682.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:02.788Z,1528915682.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:03.186Z,1528915683.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:03.595Z,1528915683.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:03.992Z,1528915683.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:04.391Z,1528915684.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:04.790Z,1528915684.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:05.186Z,1528915685.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:05.591Z,1528915685.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:05.995Z,1528915685.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:06.391Z,1528915686.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:06.786Z,1528915686.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:07.187Z,1528915687.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:07.592Z,1528915687.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:07.994Z,1528915687.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:08.395Z,1528915688.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:08.784Z,1528915688.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:09.185Z,1528915689.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:09.595Z,1528915689.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:09.991Z,1528915689.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:10.391Z,1528915690.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:10.787Z,1528915690.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:11.186Z,1528915691.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:11.595Z,1528915691.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:11.995Z,1528915691.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:12.392Z,1528915692.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:12.786Z,1528915692.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:13.187Z,1528915693.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:13.588Z,1528915693.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:13.995Z,1528915693.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:14.395Z,1528915694.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:14.783Z,1528915694.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:15.186Z,1528915695.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:15.600Z,1528915695.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:15.995Z,1528915695.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:16.418Z,1528915696.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:16.789Z,1528915696.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:17.184Z,1528915697.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:17.593Z,1528915697.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:17.993Z,1528915697.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:18.395Z,1528915698.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:18.790Z,1528915698.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:19.188Z,1528915699.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:19.600Z,1528915699.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:19.998Z,1528915699.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:20.398Z,1528915700.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:20.796Z,1528915700.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:21.196Z,1528915701.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:21.599Z,1528915701.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:21.998Z,1528915701.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:22.405Z,1528915702.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:22.787Z,1528915702.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:23.190Z,1528915703.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:23.598Z,1528915703.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:24.002Z,1528915704.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:24.398Z,1528915704.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:24.796Z,1528915704.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:25.191Z,1528915705.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:28.315Z,1528915708.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:28.512Z,1528915708.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:28.894Z,1528915708.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:29.286Z,1528915709.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:29.685Z,1528915709.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:30.070Z,1528915710.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:30.473Z,1528915710.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:30.897Z,1528915710.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:31.295Z,1528915711.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:31.675Z,1528915711.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:32.076Z,1528915712.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:32.472Z,1528915712.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:32.872Z,1528915712.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:33.276Z,1528915713.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:33.679Z,1528915713.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:34.079Z,1528915714.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:34.480Z,1528915714.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:34.875Z,1528915714.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:35.274Z,1528915715.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:35.674Z,1528915715.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:36.075Z,1528915716.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:36.471Z,1528915716.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:36.880Z,1528915716.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:37.283Z,1528915717.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:37.680Z,1528915717.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:38.074Z,1528915718.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:38.476Z,1528915718.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:38.871Z,1528915718.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:39.280Z,1528915719.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:39.678Z,1528915719.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:40.079Z,1528915720.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:40.479Z,1528915720.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:40.874Z,1528915720.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:41.272Z,1528915721.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:41.676Z,1528915721.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:42.076Z,1528915722.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:42.472Z,1528915722.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:42.879Z,1528915722.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:43.278Z,1528915723.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:43.680Z,1528915723.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:44.080Z,1528915724.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:44.473Z,1528915724.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:44.880Z,1528915724.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:45.273Z,1528915725.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:45.683Z,1528915725.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:46.088Z,1528915726.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:46.479Z,1528915726.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:46.876Z,1528915726.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:47.280Z,1528915727.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:47.674Z,1528915727.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:48.075Z,1528915728.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:48.480Z,1528915728.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:48.881Z,1528915728.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:49.282Z,1528915729.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:49.687Z,1528915729.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:50.073Z,1528915730.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:50.479Z,1528915730.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:50.874Z,1528915730.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:51.273Z,1528915731.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:51.679Z,1528915731.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:52.083Z,1528915732.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:52.479Z,1528915732.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:52.874Z,1528915732.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:53.273Z,1528915733.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:53.680Z,1528915733.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:54.076Z,1528915734.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:54.474Z,1528915734.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:54.879Z,1528915734.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:55.283Z,1528915735.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:55.705Z,1528915735.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:56.072Z,1528915736.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:56.472Z,1528915736.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:56.874Z,1528915736.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:57.272Z,1528915737.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:57.683Z,1528915737.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:58.083Z,1528915738.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:58.484Z,1528915738.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:58.877Z,1528915738.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:59.274Z,1528915739.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:59.634Z,1528915739.634 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T18:48:59.635Z,1528915739.635 [NAL9602] Data Fault, FailCount= 4
2018-06-13T18:48:59.635Z,1528915739.635 [NAL9602](ERROR): Data Fault
2018-06-13T18:48:59.689Z,1528915739.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:48:59.773Z,1528915739.773 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T18:49:00.034Z,1528915740.034 [NAL9602](INFO): Powering down
2018-06-13T18:49:00.081Z,1528915740.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:00.475Z,1528915740.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:00.875Z,1528915740.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:00.949Z,1528915740.949 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T18:49:00.949Z,1528915740.949 [NAL9602] No Fault, FailCount= 4
2018-06-13T18:49:01.280Z,1528915741.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:01.674Z,1528915741.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:02.075Z,1528915742.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:02.476Z,1528915742.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:02.874Z,1528915742.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:03.275Z,1528915743.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:03.670Z,1528915743.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:04.075Z,1528915744.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:04.474Z,1528915744.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:04.874Z,1528915744.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:05.273Z,1528915745.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:05.679Z,1528915745.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:06.072Z,1528915746.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:06.479Z,1528915746.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:06.875Z,1528915746.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:07.275Z,1528915747.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:07.676Z,1528915747.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:08.078Z,1528915748.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:08.476Z,1528915748.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:08.871Z,1528915748.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:09.280Z,1528915749.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:09.674Z,1528915749.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:10.071Z,1528915750.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:10.475Z,1528915750.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:10.874Z,1528915750.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:11.271Z,1528915751.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:11.679Z,1528915751.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:12.074Z,1528915752.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:12.473Z,1528915752.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:12.880Z,1528915752.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:13.274Z,1528915753.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:13.672Z,1528915753.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:14.077Z,1528915754.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:14.474Z,1528915754.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:14.875Z,1528915754.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:15.276Z,1528915755.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:15.674Z,1528915755.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:16.072Z,1528915756.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:16.475Z,1528915756.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:16.873Z,1528915756.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:17.272Z,1528915757.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:17.680Z,1528915757.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:18.072Z,1528915758.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:18.472Z,1528915758.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:18.880Z,1528915758.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:19.273Z,1528915759.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:19.672Z,1528915759.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:20.075Z,1528915760.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:20.474Z,1528915760.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:20.874Z,1528915760.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:21.276Z,1528915761.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:21.681Z,1528915761.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:22.072Z,1528915762.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:22.475Z,1528915762.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:22.880Z,1528915762.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:23.272Z,1528915763.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:23.680Z,1528915763.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:24.073Z,1528915764.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:24.483Z,1528915764.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:24.884Z,1528915764.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:25.278Z,1528915765.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:25.672Z,1528915765.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:26.080Z,1528915766.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:26.478Z,1528915766.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:26.878Z,1528915766.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:27.278Z,1528915767.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:27.684Z,1528915767.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:28.072Z,1528915768.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:28.477Z,1528915768.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:28.878Z,1528915768.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:31.946Z,1528915771.946 [NAL9602](INFO): Powering up NAL9602
2018-06-13T18:49:31.996Z,1528915771.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:32.168Z,1528915772.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:32.544Z,1528915772.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:32.943Z,1528915772.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:33.344Z,1528915773.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:33.741Z,1528915773.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:34.139Z,1528915774.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:34.544Z,1528915774.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:34.942Z,1528915774.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:35.343Z,1528915775.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:35.743Z,1528915775.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:36.142Z,1528915776.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:36.539Z,1528915776.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:36.943Z,1528915776.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:37.343Z,1528915777.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:37.739Z,1528915777.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:38.143Z,1528915778.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:38.525Z,1528915778.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:38.543Z,1528915778.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:38.925Z,1528915778.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:38.943Z,1528915778.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:39.326Z,1528915779.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:39.344Z,1528915779.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:39.724Z,1528915779.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:39.741Z,1528915779.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:40.122Z,1528915780.122 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:40.139Z,1528915780.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:40.526Z,1528915780.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:40.543Z,1528915780.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:40.925Z,1528915780.925 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:40.942Z,1528915780.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:41.325Z,1528915781.325 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:41.343Z,1528915781.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:41.725Z,1528915781.725 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:41.743Z,1528915781.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:42.144Z,1528915782.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:42.566Z,1528915782.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:42.910Z,1528915782.910 [NAL9602](INFO): NAL9602 initialized
2018-06-13T18:49:42.948Z,1528915782.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:43.326Z,1528915783.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:43.344Z,1528915783.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:43.736Z,1528915783.736 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:43.754Z,1528915783.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:44.138Z,1528915784.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:44.160Z,1528915784.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:44.534Z,1528915784.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:44.556Z,1528915784.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:44.930Z,1528915784.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:44.948Z,1528915784.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:45.327Z,1528915785.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:45.349Z,1528915785.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:45.729Z,1528915785.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:45.747Z,1528915785.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:46.126Z,1528915786.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:46.145Z,1528915786.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:46.528Z,1528915786.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:46.546Z,1528915786.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:46.934Z,1528915786.934 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:46.952Z,1528915786.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:47.335Z,1528915787.335 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:47.353Z,1528915787.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:47.734Z,1528915787.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:47.752Z,1528915787.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:48.127Z,1528915788.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:48.157Z,1528915788.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:48.527Z,1528915788.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:48.545Z,1528915788.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:48.928Z,1528915788.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:48.958Z,1528915788.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:49.319Z,1528915789.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:49.356Z,1528915789.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:49.741Z,1528915789.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:49.759Z,1528915789.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:50.139Z,1528915790.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:50.157Z,1528915790.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:50.539Z,1528915790.539 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:50.557Z,1528915790.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:50.920Z,1528915790.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:50.952Z,1528915790.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:51.327Z,1528915791.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:51.351Z,1528915791.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:51.719Z,1528915791.719 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:51.760Z,1528915791.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:52.120Z,1528915792.120 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:52.151Z,1528915792.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:52.527Z,1528915792.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:52.551Z,1528915792.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:52.940Z,1528915792.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:52.964Z,1528915792.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:53.342Z,1528915793.342 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:53.360Z,1528915793.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:53.743Z,1528915793.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:53.761Z,1528915793.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:54.127Z,1528915794.127 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:54.152Z,1528915794.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:54.519Z,1528915794.519 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:54.550Z,1528915794.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:54.923Z,1528915794.923 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:54.960Z,1528915794.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:55.334Z,1528915795.334 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:55.353Z,1528915795.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:55.739Z,1528915795.739 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:55.764Z,1528915795.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:56.146Z,1528915796.146 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:56.165Z,1528915796.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:56.534Z,1528915796.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:56.567Z,1528915796.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:56.920Z,1528915796.920 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:56.948Z,1528915796.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:57.323Z,1528915797.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:57.356Z,1528915797.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:57.723Z,1528915797.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:57.764Z,1528915797.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:58.119Z,1528915798.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:58.156Z,1528915798.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:58.522Z,1528915798.522 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:58.560Z,1528915798.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:58.936Z,1528915798.936 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:58.971Z,1528915798.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:59.345Z,1528915799.345 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:59.363Z,1528915799.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:49:59.744Z,1528915799.744 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:49:59.769Z,1528915799.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:00.123Z,1528915800.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:00.160Z,1528915800.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:00.524Z,1528915800.524 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:00.557Z,1528915800.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:00.924Z,1528915800.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:00.959Z,1528915800.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:01.323Z,1528915801.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:01.364Z,1528915801.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:01.741Z,1528915801.741 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:01.759Z,1528915801.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:02.143Z,1528915802.143 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:02.161Z,1528915802.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:02.541Z,1528915802.541 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:02.559Z,1528915802.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:02.919Z,1528915802.919 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:02.952Z,1528915802.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:03.323Z,1528915803.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:03.360Z,1528915803.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:03.723Z,1528915803.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:03.740Z,1528915803.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:04.123Z,1528915804.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:04.141Z,1528915804.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:04.527Z,1528915804.527 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:04.544Z,1528915804.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:04.937Z,1528915804.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:04.971Z,1528915804.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:05.341Z,1528915805.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:05.375Z,1528915805.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:05.734Z,1528915805.734 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:05.751Z,1528915805.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:06.128Z,1528915806.128 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:06.146Z,1528915806.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:06.528Z,1528915806.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:06.546Z,1528915806.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:06.928Z,1528915806.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:06.946Z,1528915806.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:07.328Z,1528915807.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:07.347Z,1528915807.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:07.733Z,1528915807.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:07.751Z,1528915807.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:08.137Z,1528915808.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:08.155Z,1528915808.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:08.534Z,1528915808.534 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:08.551Z,1528915808.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:08.926Z,1528915808.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:08.943Z,1528915808.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:09.328Z,1528915809.328 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:09.346Z,1528915809.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:09.727Z,1528915809.727 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:09.757Z,1528915809.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:10.130Z,1528915810.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:10.148Z,1528915810.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:10.529Z,1528915810.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:10.546Z,1528915810.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:10.938Z,1528915810.938 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:10.956Z,1528915810.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:11.338Z,1528915811.338 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:11.356Z,1528915811.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:11.738Z,1528915811.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:11.760Z,1528915811.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:12.130Z,1528915812.130 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:12.148Z,1528915812.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:12.526Z,1528915812.526 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:12.543Z,1528915812.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:12.930Z,1528915812.930 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:12.952Z,1528915812.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:13.329Z,1528915813.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:13.347Z,1528915813.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:13.738Z,1528915813.738 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:13.756Z,1528915813.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:14.139Z,1528915814.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:14.156Z,1528915814.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:14.538Z,1528915814.538 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:14.555Z,1528915814.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:14.926Z,1528915814.926 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:14.944Z,1528915814.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:15.323Z,1528915815.323 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:15.359Z,1528915815.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:15.723Z,1528915815.723 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:15.760Z,1528915815.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:16.119Z,1528915816.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:16.150Z,1528915816.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:16.523Z,1528915816.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:16.556Z,1528915816.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:16.937Z,1528915816.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:16.966Z,1528915816.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:17.337Z,1528915817.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:17.365Z,1528915817.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:17.737Z,1528915817.737 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:17.772Z,1528915817.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:18.123Z,1528915818.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:18.157Z,1528915818.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:18.523Z,1528915818.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:18.541Z,1528915818.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:18.928Z,1528915818.928 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:18.962Z,1528915818.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:19.327Z,1528915819.327 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:19.344Z,1528915819.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:19.733Z,1528915819.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:19.751Z,1528915819.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:20.137Z,1528915820.137 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:20.155Z,1528915820.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:20.542Z,1528915820.542 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:20.564Z,1528915820.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:20.929Z,1528915820.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:20.948Z,1528915820.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:21.329Z,1528915821.329 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:21.346Z,1528915821.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:21.729Z,1528915821.729 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:21.747Z,1528915821.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:22.119Z,1528915822.119 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:22.158Z,1528915822.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:22.523Z,1528915822.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:22.559Z,1528915822.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:22.940Z,1528915822.940 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:22.959Z,1528915822.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:23.341Z,1528915823.341 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:23.359Z,1528915823.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:23.742Z,1528915823.742 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:23.768Z,1528915823.768 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:23.768Z,1528915823.768 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 307
2018-06-13T18:50:23.768Z,1528915823.768 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:50:23.770Z,1528915823.770 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:23.770Z,1528915823.770 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 307
2018-06-13T18:50:23.770Z,1528915823.770 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:50:23.772Z,1528915823.772 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:23.772Z,1528915823.772 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 307
2018-06-13T18:50:23.772Z,1528915823.772 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:50:23.853Z,1528915823.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:50:23.853Z,1528915823.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:50:23.854Z,1528915823.854 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:50:24.123Z,1528915824.123 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:24.233Z,1528915824.233 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:50:24.233Z,1528915824.233 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 307
2018-06-13T18:50:24.234Z,1528915824.234 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:50:24.234Z,1528915824.234 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 307
2018-06-13T18:50:24.234Z,1528915824.234 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:50:24.234Z,1528915824.234 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 307
2018-06-13T18:50:24.523Z,1528915824.523 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:24.540Z,1528915824.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:50:24.540Z,1528915824.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:50:24.540Z,1528915824.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:50:24.553Z,1528915824.553 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:50:24.553Z,1528915824.553 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:50:24.553Z,1528915824.553 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:50:24.554Z,1528915824.554 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:50:24.554Z,1528915824.554 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:50:24.555Z,1528915824.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:50:24.924Z,1528915824.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:50:24.958Z,1528915824.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:50:24.959Z,1528915824.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:25.348Z,1528915825.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:50:25.349Z,1528915825.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:28.494Z,1528915828.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2018-06-13T18:50:28.494Z,1528915828.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:28.676Z,1528915828.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T18:50:28.678Z,1528915828.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:29.050Z,1528915829.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T18:50:29.051Z,1528915829.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:29.443Z,1528915829.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T18:50:29.444Z,1528915829.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:29.844Z,1528915829.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T18:50:29.845Z,1528915829.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:30.244Z,1528915830.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T18:50:30.245Z,1528915830.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:30.639Z,1528915830.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T18:50:30.640Z,1528915830.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:31.056Z,1528915831.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T18:50:31.073Z,1528915831.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:31.455Z,1528915831.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T18:50:31.456Z,1528915831.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:31.848Z,1528915831.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T18:50:31.850Z,1528915831.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:32.246Z,1528915832.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T18:50:32.247Z,1528915832.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:32.646Z,1528915832.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T18:50:32.647Z,1528915832.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:33.041Z,1528915833.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T18:50:33.042Z,1528915833.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:33.445Z,1528915833.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T18:50:33.446Z,1528915833.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:33.851Z,1528915833.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T18:50:33.852Z,1528915833.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:34.250Z,1528915834.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T18:50:34.251Z,1528915834.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:34.651Z,1528915834.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T18:50:34.651Z,1528915834.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:35.046Z,1528915835.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T18:50:35.047Z,1528915835.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:35.451Z,1528915835.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T18:50:35.452Z,1528915835.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:35.848Z,1528915835.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T18:50:35.849Z,1528915835.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:36.248Z,1528915836.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T18:50:36.249Z,1528915836.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:36.653Z,1528915836.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T18:50:36.654Z,1528915836.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:37.058Z,1528915837.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T18:50:37.058Z,1528915837.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:37.457Z,1528915837.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T18:50:37.458Z,1528915837.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:37.857Z,1528915837.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T18:50:37.858Z,1528915837.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:38.246Z,1528915838.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T18:50:38.247Z,1528915838.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:38.651Z,1528915838.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T18:50:38.652Z,1528915838.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:39.055Z,1528915839.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T18:50:39.056Z,1528915839.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:39.447Z,1528915839.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T18:50:39.447Z,1528915839.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:39.859Z,1528915839.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T18:50:39.860Z,1528915839.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:40.254Z,1528915840.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T18:50:40.255Z,1528915840.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:40.659Z,1528915840.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T18:50:40.660Z,1528915840.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:41.057Z,1528915841.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T18:50:41.058Z,1528915841.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:41.452Z,1528915841.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T18:50:41.453Z,1528915841.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:41.845Z,1528915841.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T18:50:41.846Z,1528915841.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:42.247Z,1528915842.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T18:50:42.248Z,1528915842.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:42.647Z,1528915842.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T18:50:42.648Z,1528915842.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:43.064Z,1528915843.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T18:50:43.065Z,1528915843.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:43.454Z,1528915843.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T18:50:43.455Z,1528915843.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:43.854Z,1528915843.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:44.245Z,1528915844.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:44.656Z,1528915844.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:45.046Z,1528915845.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:45.444Z,1528915845.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:45.856Z,1528915845.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:46.254Z,1528915846.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:46.659Z,1528915846.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:47.056Z,1528915847.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:47.442Z,1528915847.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:47.855Z,1528915847.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:48.253Z,1528915848.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:48.636Z,1528915848.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:49.059Z,1528915849.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:49.472Z,1528915849.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:49.860Z,1528915849.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:50.257Z,1528915850.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:50.640Z,1528915850.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:51.037Z,1528915851.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:51.444Z,1528915851.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:51.874Z,1528915851.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:52.266Z,1528915852.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:52.671Z,1528915852.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:53.043Z,1528915853.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:53.443Z,1528915853.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:53.842Z,1528915853.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:54.245Z,1528915854.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:54.642Z,1528915854.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:55.055Z,1528915855.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:55.454Z,1528915855.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:55.854Z,1528915855.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:56.247Z,1528915856.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:56.648Z,1528915856.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:57.048Z,1528915857.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:57.445Z,1528915857.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:57.852Z,1528915857.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:58.254Z,1528915858.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:58.655Z,1528915858.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:59.046Z,1528915859.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:59.446Z,1528915859.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:50:59.846Z,1528915859.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:00.244Z,1528915860.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:00.646Z,1528915860.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:01.052Z,1528915861.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:01.454Z,1528915861.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:01.855Z,1528915861.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:02.246Z,1528915862.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:02.645Z,1528915862.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:03.048Z,1528915863.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:03.446Z,1528915863.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:03.851Z,1528915863.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:04.255Z,1528915864.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:04.651Z,1528915864.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:05.045Z,1528915865.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:05.447Z,1528915865.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:05.847Z,1528915865.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:06.247Z,1528915866.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:06.647Z,1528915866.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:07.054Z,1528915867.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:07.464Z,1528915867.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:07.868Z,1528915867.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:08.247Z,1528915868.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:08.652Z,1528915868.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:09.048Z,1528915869.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:09.452Z,1528915869.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:09.858Z,1528915869.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:10.261Z,1528915870.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:10.657Z,1528915870.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:11.052Z,1528915871.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:11.448Z,1528915871.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:11.846Z,1528915871.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:12.248Z,1528915872.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:12.656Z,1528915872.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:13.057Z,1528915873.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:13.460Z,1528915873.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:13.860Z,1528915873.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:14.247Z,1528915874.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:14.653Z,1528915874.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:15.048Z,1528915875.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:15.452Z,1528915875.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:15.858Z,1528915875.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:16.258Z,1528915876.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:16.657Z,1528915876.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:17.052Z,1528915877.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:17.445Z,1528915877.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:17.852Z,1528915877.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:18.257Z,1528915878.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:18.650Z,1528915878.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:19.058Z,1528915879.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:19.464Z,1528915879.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:19.863Z,1528915879.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:20.253Z,1528915880.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:20.664Z,1528915880.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:21.056Z,1528915881.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:21.455Z,1528915881.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:21.859Z,1528915881.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:22.264Z,1528915882.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:22.658Z,1528915882.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:23.055Z,1528915883.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:23.452Z,1528915883.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:23.856Z,1528915883.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:24.265Z,1528915884.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:24.657Z,1528915884.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:25.067Z,1528915885.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:25.472Z,1528915885.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:28.572Z,1528915888.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:28.576Z,1528915888.576 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T18:46:25.5Z
2018-06-13T18:51:28.576Z,1528915888.576 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T18:51:28.576Z,1528915888.576 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T18:51:28.720Z,1528915888.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:29.831Z,1528915889.831 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:51:29.848Z,1528915889.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:29.949Z,1528915889.949 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:51:29.988Z,1528915889.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:30.373Z,1528915890.373 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:51:30.391Z,1528915890.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:30.789Z,1528915890.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:31.189Z,1528915891.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:31.595Z,1528915891.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:31.957Z,1528915891.957 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:51:31.991Z,1528915891.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:32.355Z,1528915892.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:51:32.373Z,1528915892.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:32.766Z,1528915892.766 [DAT](DEBUG): LCB error: Software Overcurrent.
2018-06-13T18:51:32.800Z,1528915892.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:33.196Z,1528915893.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:33.604Z,1528915893.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:33.973Z,1528915893.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:34.393Z,1528915894.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:37.498Z,1528915897.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:37.593Z,1528915897.593 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0356.lzma
2018-06-13T18:51:37.696Z,1528915897.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:38.058Z,1528915898.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:38.394Z,1528915898.394 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0356.lzma.bak
2018-06-13T18:51:38.394Z,1528915898.394 [DataOverHttps](INFO): SBD MOMSN=8329750
2018-06-13T18:51:38.463Z,1528915898.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:40.360Z,1528915900.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:40.505Z,1528915900.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:40.910Z,1528915900.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:41.315Z,1528915901.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:41.706Z,1528915901.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:42.106Z,1528915902.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:42.504Z,1528915902.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:42.900Z,1528915902.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:43.312Z,1528915903.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:43.712Z,1528915903.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:46.819Z,1528915906.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:46.982Z,1528915906.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:47.392Z,1528915907.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:47.777Z,1528915907.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:48.176Z,1528915908.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:48.579Z,1528915908.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:48.986Z,1528915908.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:49.389Z,1528915909.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:49.787Z,1528915909.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:52.897Z,1528915912.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:52.987Z,1528915912.987 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180613T032335/Express0357.lzma
2018-06-13T18:51:53.068Z,1528915913.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:53.452Z,1528915913.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:53.786Z,1528915913.786 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0357.lzma.bak
2018-06-13T18:51:53.786Z,1528915913.786 [DataOverHttps](INFO): SBD MOMSN=8329752
2018-06-13T18:51:53.854Z,1528915913.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:55.740Z,1528915915.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:55.743Z,1528915915.743 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T18:51:55.743Z,1528915915.743 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T18:51:55.743Z,1528915915.743 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T18:51:55.888Z,1528915915.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:59.059Z,1528915919.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:59.236Z,1528915919.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:51:59.637Z,1528915919.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:00.041Z,1528915920.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:00.433Z,1528915920.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:00.832Z,1528915920.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:01.237Z,1528915921.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:01.693Z,1528915921.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:02.079Z,1528915922.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:02.486Z,1528915922.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:02.839Z,1528915922.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:03.250Z,1528915923.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:03.681Z,1528915923.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:04.025Z,1528915924.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:04.427Z,1528915924.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:04.838Z,1528915924.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:05.236Z,1528915925.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:05.633Z,1528915925.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:06.040Z,1528915926.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:06.433Z,1528915926.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:06.835Z,1528915926.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:07.239Z,1528915927.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:07.630Z,1528915927.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:08.032Z,1528915928.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:08.435Z,1528915928.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:08.816Z,1528915928.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:09.242Z,1528915929.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:09.641Z,1528915929.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:10.042Z,1528915930.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:10.420Z,1528915930.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:10.821Z,1528915930.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:11.217Z,1528915931.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:11.620Z,1528915931.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:12.047Z,1528915932.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:12.431Z,1528915932.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:12.827Z,1528915932.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:13.225Z,1528915933.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:13.620Z,1528915933.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:14.024Z,1528915934.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:14.423Z,1528915934.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:14.820Z,1528915934.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:15.232Z,1528915935.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:15.631Z,1528915935.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:16.027Z,1528915936.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:16.424Z,1528915936.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:16.823Z,1528915936.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:17.226Z,1528915937.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:17.623Z,1528915937.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:18.028Z,1528915938.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:18.431Z,1528915938.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:18.828Z,1528915938.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:19.224Z,1528915939.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:19.627Z,1528915939.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:20.023Z,1528915940.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:20.423Z,1528915940.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:20.824Z,1528915940.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:21.231Z,1528915941.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:21.626Z,1528915941.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:22.028Z,1528915942.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:22.422Z,1528915942.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:22.824Z,1528915942.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:23.228Z,1528915943.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:23.622Z,1528915943.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:24.027Z,1528915944.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:24.431Z,1528915944.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:24.828Z,1528915944.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:25.222Z,1528915945.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:25.620Z,1528915945.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:26.028Z,1528915946.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:26.424Z,1528915946.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:26.820Z,1528915946.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:27.227Z,1528915947.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:27.657Z,1528915947.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:28.028Z,1528915948.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:28.428Z,1528915948.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:28.822Z,1528915948.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:29.219Z,1528915949.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:29.621Z,1528915949.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:30.032Z,1528915950.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:30.431Z,1528915950.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:30.827Z,1528915950.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:31.219Z,1528915951.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:31.618Z,1528915951.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:32.020Z,1528915952.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:32.428Z,1528915952.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:32.822Z,1528915952.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:33.228Z,1528915953.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:33.630Z,1528915953.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:34.027Z,1528915954.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:34.422Z,1528915954.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:34.821Z,1528915954.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:35.223Z,1528915955.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:35.628Z,1528915955.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:36.032Z,1528915956.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:36.432Z,1528915956.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:36.832Z,1528915956.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:37.228Z,1528915957.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:37.621Z,1528915957.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:38.024Z,1528915958.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:38.423Z,1528915958.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:38.828Z,1528915958.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:39.228Z,1528915959.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:39.630Z,1528915959.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:40.031Z,1528915960.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:40.424Z,1528915960.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:40.822Z,1528915960.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:41.223Z,1528915961.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:41.624Z,1528915961.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:42.031Z,1528915962.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:42.431Z,1528915962.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:42.827Z,1528915962.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:43.219Z,1528915963.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:43.622Z,1528915963.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:44.022Z,1528915964.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:44.433Z,1528915964.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:44.822Z,1528915964.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:45.227Z,1528915965.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:45.631Z,1528915965.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:46.028Z,1528915966.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:46.424Z,1528915966.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:46.823Z,1528915966.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:47.222Z,1528915967.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:47.621Z,1528915967.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:48.032Z,1528915968.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:48.431Z,1528915968.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:48.832Z,1528915968.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:49.223Z,1528915969.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:49.623Z,1528915969.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:50.023Z,1528915970.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:50.425Z,1528915970.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:50.823Z,1528915970.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:51.232Z,1528915971.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:51.631Z,1528915971.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:52.028Z,1528915972.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:52.424Z,1528915972.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:52.827Z,1528915972.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:53.224Z,1528915973.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:53.626Z,1528915973.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:54.036Z,1528915974.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:54.427Z,1528915974.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:54.828Z,1528915974.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:55.222Z,1528915975.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:55.636Z,1528915975.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:56.026Z,1528915976.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:56.429Z,1528915976.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:59.559Z,1528915979.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:52:59.732Z,1528915979.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:00.115Z,1528915980.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:00.516Z,1528915980.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:00.913Z,1528915980.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:01.290Z,1528915981.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:01.688Z,1528915981.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:02.115Z,1528915982.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:02.516Z,1528915982.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:02.911Z,1528915982.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:03.288Z,1528915983.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:03.717Z,1528915983.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:04.113Z,1528915984.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:04.506Z,1528915984.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:04.896Z,1528915984.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:05.299Z,1528915985.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:05.768Z,1528915985.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:06.123Z,1528915986.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:06.500Z,1528915986.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:06.896Z,1528915986.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:07.293Z,1528915987.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:07.690Z,1528915987.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:08.100Z,1528915988.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:08.523Z,1528915988.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:08.920Z,1528915988.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:09.292Z,1528915989.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:09.700Z,1528915989.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:10.100Z,1528915990.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:10.498Z,1528915990.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:10.905Z,1528915990.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:11.302Z,1528915991.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:11.705Z,1528915991.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:12.105Z,1528915992.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:12.491Z,1528915992.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:12.894Z,1528915992.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:13.300Z,1528915993.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:13.694Z,1528915993.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:14.103Z,1528915994.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:14.504Z,1528915994.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:14.908Z,1528915994.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:15.295Z,1528915995.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:15.705Z,1528915995.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:16.100Z,1528915996.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:16.497Z,1528915996.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:16.905Z,1528915996.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:17.308Z,1528915997.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:17.704Z,1528915997.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:18.111Z,1528915998.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:18.496Z,1528915998.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:18.896Z,1528915998.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:19.300Z,1528915999.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:19.702Z,1528915999.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:20.108Z,1528916000.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:20.506Z,1528916000.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:20.901Z,1528916000.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:21.295Z,1528916001.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:21.709Z,1528916001.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:22.097Z,1528916002.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:22.497Z,1528916002.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:22.889Z,1528916002.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:23.315Z,1528916003.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:23.718Z,1528916003.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:24.104Z,1528916004.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:24.491Z,1528916004.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:24.893Z,1528916004.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:24.894Z,1528916004.894 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 308
2018-06-13T18:53:24.894Z,1528916004.894 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:53:24.895Z,1528916004.895 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:24.896Z,1528916004.896 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 308
2018-06-13T18:53:24.896Z,1528916004.896 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:53:24.897Z,1528916004.897 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:24.898Z,1528916004.898 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 308
2018-06-13T18:53:24.898Z,1528916004.898 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:53:24.973Z,1528916004.973 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:53:24.973Z,1528916004.973 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:53:24.974Z,1528916004.974 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:53:25.389Z,1528916005.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:53:25.389Z,1528916005.389 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 308
2018-06-13T18:53:25.390Z,1528916005.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:53:25.390Z,1528916005.390 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 308
2018-06-13T18:53:25.390Z,1528916005.390 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:53:25.390Z,1528916005.390 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 308
2018-06-13T18:53:25.699Z,1528916005.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:53:25.700Z,1528916005.700 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:53:25.700Z,1528916005.700 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:53:25.700Z,1528916005.700 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:53:25.701Z,1528916005.701 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:53:25.701Z,1528916005.701 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:53:25.702Z,1528916005.702 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:53:25.702Z,1528916005.702 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:53:25.702Z,1528916005.702 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:53:26.100Z,1528916006.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:53:26.101Z,1528916006.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:26.504Z,1528916006.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:53:26.505Z,1528916006.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:26.908Z,1528916006.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:53:26.909Z,1528916006.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:27.295Z,1528916007.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:53:27.296Z,1528916007.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:27.704Z,1528916007.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:53:27.705Z,1528916007.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:28.092Z,1528916008.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:53:28.093Z,1528916008.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:28.495Z,1528916008.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:53:28.496Z,1528916008.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:28.899Z,1528916008.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:53:28.900Z,1528916008.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:29.300Z,1528916009.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:53:29.301Z,1528916009.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:29.708Z,1528916009.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:53:29.709Z,1528916009.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:30.104Z,1528916010.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:53:30.105Z,1528916010.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:30.492Z,1528916010.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:53:30.493Z,1528916010.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:30.900Z,1528916010.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:53:30.902Z,1528916010.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:31.304Z,1528916011.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:53:31.304Z,1528916011.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:31.702Z,1528916011.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:53:31.703Z,1528916011.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:32.108Z,1528916012.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:53:32.109Z,1528916012.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:32.509Z,1528916012.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:53:32.510Z,1528916012.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:32.901Z,1528916012.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:53:32.902Z,1528916012.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:33.295Z,1528916013.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:53:33.296Z,1528916013.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:33.700Z,1528916013.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:53:33.702Z,1528916013.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:34.091Z,1528916014.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:53:34.092Z,1528916014.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:34.495Z,1528916014.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:53:34.496Z,1528916014.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:34.895Z,1528916014.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T18:53:34.896Z,1528916014.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:35.300Z,1528916015.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:53:35.301Z,1528916015.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:35.708Z,1528916015.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:53:35.709Z,1528916015.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:36.108Z,1528916016.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T18:53:36.109Z,1528916016.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:36.504Z,1528916016.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:53:36.509Z,1528916016.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:36.895Z,1528916016.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:53:36.896Z,1528916016.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:37.299Z,1528916017.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:53:37.300Z,1528916017.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:37.698Z,1528916017.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:53:37.699Z,1528916017.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:38.104Z,1528916018.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:53:38.105Z,1528916018.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:38.511Z,1528916018.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:53:38.512Z,1528916018.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:38.905Z,1528916018.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:53:38.906Z,1528916018.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:39.296Z,1528916019.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:53:39.298Z,1528916019.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:39.707Z,1528916019.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T18:53:39.708Z,1528916019.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:40.102Z,1528916020.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:53:40.103Z,1528916020.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:40.498Z,1528916020.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:53:40.499Z,1528916020.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:40.899Z,1528916020.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:53:40.900Z,1528916020.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:41.311Z,1528916021.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:53:41.312Z,1528916021.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:41.709Z,1528916021.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:53:41.710Z,1528916021.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:42.111Z,1528916022.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:53:42.111Z,1528916022.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:42.499Z,1528916022.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:53:42.500Z,1528916022.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:42.896Z,1528916022.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:53:42.897Z,1528916022.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:43.312Z,1528916023.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:53:43.317Z,1528916023.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:43.702Z,1528916023.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:53:43.703Z,1528916023.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:44.103Z,1528916024.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T18:53:44.104Z,1528916024.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:44.509Z,1528916024.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T18:53:44.510Z,1528916024.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:44.908Z,1528916024.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:45.301Z,1528916025.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:45.709Z,1528916025.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:46.105Z,1528916026.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:46.490Z,1528916026.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:46.892Z,1528916026.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:47.318Z,1528916027.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:47.720Z,1528916027.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:48.120Z,1528916028.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:48.492Z,1528916028.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:48.892Z,1528916028.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:49.297Z,1528916029.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:49.689Z,1528916029.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:50.100Z,1528916030.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:50.503Z,1528916030.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:50.900Z,1528916030.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:51.300Z,1528916031.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:51.695Z,1528916031.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:52.092Z,1528916032.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:52.493Z,1528916032.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:52.900Z,1528916032.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:53.300Z,1528916033.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:53.702Z,1528916033.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:54.103Z,1528916034.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:54.491Z,1528916034.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:54.894Z,1528916034.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:55.295Z,1528916035.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:55.692Z,1528916035.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:56.107Z,1528916036.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:56.507Z,1528916036.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:59.635Z,1528916039.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:53:59.801Z,1528916039.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:00.189Z,1528916040.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:00.586Z,1528916040.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:00.986Z,1528916040.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:01.390Z,1528916041.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:01.786Z,1528916041.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:02.187Z,1528916042.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:02.585Z,1528916042.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:02.965Z,1528916042.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:03.393Z,1528916043.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:03.769Z,1528916043.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:04.199Z,1528916044.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:04.603Z,1528916044.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:04.999Z,1528916044.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:05.376Z,1528916045.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:05.772Z,1528916045.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:06.208Z,1528916046.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:06.572Z,1528916046.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:06.972Z,1528916046.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:07.400Z,1528916047.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:07.808Z,1528916047.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:08.183Z,1528916048.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:08.578Z,1528916048.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:08.972Z,1528916048.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:09.374Z,1528916049.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:09.776Z,1528916049.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:10.180Z,1528916050.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:10.583Z,1528916050.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:10.983Z,1528916050.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:11.372Z,1528916051.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:11.774Z,1528916051.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:12.175Z,1528916052.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:12.579Z,1528916052.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:12.973Z,1528916052.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:13.387Z,1528916053.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:13.784Z,1528916053.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:14.184Z,1528916054.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:14.586Z,1528916054.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:14.975Z,1528916054.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:15.376Z,1528916055.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:15.783Z,1528916055.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:16.188Z,1528916056.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:16.587Z,1528916056.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:16.988Z,1528916056.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:17.372Z,1528916057.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:17.777Z,1528916057.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:18.180Z,1528916058.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:18.576Z,1528916058.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:18.975Z,1528916058.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:19.396Z,1528916059.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:19.824Z,1528916059.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:20.192Z,1528916060.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:20.581Z,1528916060.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:20.981Z,1528916060.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:21.378Z,1528916061.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:21.779Z,1528916061.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:22.185Z,1528916062.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:22.589Z,1528916062.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:22.987Z,1528916062.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:23.381Z,1528916063.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:23.783Z,1528916063.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:24.188Z,1528916064.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:24.581Z,1528916064.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:24.982Z,1528916064.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:25.394Z,1528916065.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:25.786Z,1528916065.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:26.189Z,1528916066.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:26.589Z,1528916066.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:26.982Z,1528916066.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:27.382Z,1528916067.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:27.788Z,1528916067.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:28.189Z,1528916068.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:28.602Z,1528916068.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:28.996Z,1528916068.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:29.388Z,1528916069.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:29.785Z,1528916069.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:30.169Z,1528916070.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:30.601Z,1528916070.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:30.974Z,1528916070.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:31.404Z,1528916071.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:31.802Z,1528916071.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:32.218Z,1528916072.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:32.601Z,1528916072.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:32.974Z,1528916072.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:33.376Z,1528916073.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:33.776Z,1528916073.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:34.180Z,1528916074.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:34.583Z,1528916074.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:34.984Z,1528916074.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:35.372Z,1528916075.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:35.776Z,1528916075.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:36.174Z,1528916076.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:36.571Z,1528916076.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:36.973Z,1528916076.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:37.379Z,1528916077.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:37.784Z,1528916077.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:38.183Z,1528916078.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:38.572Z,1528916078.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:38.972Z,1528916078.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:39.375Z,1528916079.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:39.776Z,1528916079.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:40.181Z,1528916080.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:40.588Z,1528916080.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:40.988Z,1528916080.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:41.372Z,1528916081.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:41.774Z,1528916081.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:42.175Z,1528916082.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:42.583Z,1528916082.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:42.990Z,1528916082.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:43.388Z,1528916083.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:43.788Z,1528916083.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:44.188Z,1528916084.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:44.576Z,1528916084.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:44.974Z,1528916084.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:45.384Z,1528916085.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:45.785Z,1528916085.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:46.192Z,1528916086.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:46.588Z,1528916086.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:46.992Z,1528916086.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:47.380Z,1528916087.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:47.774Z,1528916087.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:48.175Z,1528916088.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:48.577Z,1528916088.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:48.974Z,1528916088.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:49.390Z,1528916089.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:49.792Z,1528916089.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:50.185Z,1528916090.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:50.575Z,1528916090.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:50.974Z,1528916090.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:51.378Z,1528916091.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:51.778Z,1528916091.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:52.189Z,1528916092.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:52.587Z,1528916092.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:52.992Z,1528916092.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:53.375Z,1528916093.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:53.776Z,1528916093.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:54.177Z,1528916094.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:54.576Z,1528916094.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:54.974Z,1528916094.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:55.388Z,1528916095.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:55.792Z,1528916095.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:56.188Z,1528916096.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:56.584Z,1528916096.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:56.979Z,1528916096.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:57.379Z,1528916097.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:57.784Z,1528916097.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:58.195Z,1528916098.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:58.619Z,1528916098.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:58.989Z,1528916098.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:59.384Z,1528916099.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:54:59.778Z,1528916099.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:00.180Z,1528916100.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:03.294Z,1528916103.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:03.467Z,1528916103.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:03.848Z,1528916103.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:04.270Z,1528916104.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:04.647Z,1528916104.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:05.042Z,1528916105.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:05.440Z,1528916105.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:05.843Z,1528916105.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:06.247Z,1528916106.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:06.647Z,1528916106.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:07.047Z,1528916107.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:07.439Z,1528916107.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:07.840Z,1528916107.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:08.246Z,1528916108.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:08.652Z,1528916108.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:09.041Z,1528916109.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:09.448Z,1528916109.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:09.851Z,1528916109.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:10.248Z,1528916110.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:10.689Z,1528916110.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:11.104Z,1528916111.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:11.443Z,1528916111.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:11.844Z,1528916111.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:12.257Z,1528916112.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:12.656Z,1528916112.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:13.056Z,1528916113.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:13.475Z,1528916113.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:13.869Z,1528916113.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:14.236Z,1528916114.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:14.645Z,1528916114.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:15.051Z,1528916115.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:15.467Z,1528916115.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:15.870Z,1528916115.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:16.271Z,1528916116.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:16.672Z,1528916116.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:17.044Z,1528916117.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:17.467Z,1528916117.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:17.880Z,1528916117.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:18.279Z,1528916118.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:18.645Z,1528916118.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:19.068Z,1528916119.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:19.444Z,1528916119.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:19.838Z,1528916119.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:20.250Z,1528916120.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:20.643Z,1528916120.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:21.040Z,1528916121.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:21.453Z,1528916121.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:21.873Z,1528916121.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:22.246Z,1528916122.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:22.641Z,1528916122.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:23.043Z,1528916123.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:23.443Z,1528916123.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:23.839Z,1528916123.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:24.252Z,1528916124.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:24.652Z,1528916124.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:25.052Z,1528916125.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:25.445Z,1528916125.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:25.840Z,1528916125.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:26.241Z,1528916126.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:26.647Z,1528916126.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:27.040Z,1528916127.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:27.453Z,1528916127.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:27.849Z,1528916127.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:28.246Z,1528916128.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:28.639Z,1528916128.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:29.044Z,1528916129.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:29.436Z,1528916129.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:29.840Z,1528916129.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:30.250Z,1528916130.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:30.649Z,1528916130.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:31.052Z,1528916131.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:31.439Z,1528916131.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:31.837Z,1528916131.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:32.246Z,1528916132.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:32.646Z,1528916132.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:33.038Z,1528916133.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:33.453Z,1528916133.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:33.854Z,1528916133.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:34.253Z,1528916134.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:34.641Z,1528916134.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:35.056Z,1528916135.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:35.442Z,1528916135.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:35.842Z,1528916135.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:36.255Z,1528916136.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:36.653Z,1528916136.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:37.054Z,1528916137.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:37.444Z,1528916137.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:37.843Z,1528916137.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:38.241Z,1528916138.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:38.645Z,1528916138.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:39.042Z,1528916139.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:39.456Z,1528916139.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:39.878Z,1528916139.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:40.246Z,1528916140.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:40.641Z,1528916140.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:41.044Z,1528916141.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:41.445Z,1528916141.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:41.842Z,1528916141.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:42.255Z,1528916142.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:42.654Z,1528916142.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:43.053Z,1528916143.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:43.444Z,1528916143.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:43.841Z,1528916143.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:44.241Z,1528916144.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:44.652Z,1528916144.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:45.049Z,1528916145.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:45.454Z,1528916145.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:45.866Z,1528916145.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:46.254Z,1528916146.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:46.648Z,1528916146.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:47.053Z,1528916147.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:47.454Z,1528916147.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:47.849Z,1528916147.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:48.264Z,1528916148.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:48.657Z,1528916148.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:49.060Z,1528916149.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:49.435Z,1528916149.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:49.833Z,1528916149.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:50.233Z,1528916150.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:50.634Z,1528916150.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:51.037Z,1528916151.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:51.462Z,1528916151.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:51.867Z,1528916151.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:52.262Z,1528916152.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:52.637Z,1528916152.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:53.038Z,1528916153.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:53.440Z,1528916153.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:53.840Z,1528916153.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:54.267Z,1528916154.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:54.665Z,1528916154.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:55.069Z,1528916155.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:55.434Z,1528916155.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:55.842Z,1528916155.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:56.248Z,1528916156.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:56.642Z,1528916156.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:59.769Z,1528916159.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:55:59.947Z,1528916159.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:00.327Z,1528916160.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:00.732Z,1528916160.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:01.109Z,1528916161.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:01.503Z,1528916161.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:01.898Z,1528916161.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:02.332Z,1528916162.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:02.731Z,1528916162.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:03.132Z,1528916163.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:03.505Z,1528916163.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:03.906Z,1528916163.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:04.300Z,1528916164.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:04.709Z,1528916164.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:05.108Z,1528916165.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:05.536Z,1528916165.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:05.933Z,1528916165.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:06.335Z,1528916166.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:06.703Z,1528916166.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:07.104Z,1528916167.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:07.504Z,1528916167.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:07.908Z,1528916167.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:08.311Z,1528916168.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:08.735Z,1528916168.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:09.115Z,1528916169.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:09.512Z,1528916169.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:09.907Z,1528916169.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:10.312Z,1528916170.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:10.705Z,1528916170.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:11.108Z,1528916171.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:11.513Z,1528916171.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:11.919Z,1528916171.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:12.315Z,1528916172.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:12.705Z,1528916172.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:13.106Z,1528916173.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:13.508Z,1528916173.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:13.907Z,1528916173.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:14.311Z,1528916174.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:14.715Z,1528916174.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:15.114Z,1528916175.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:15.505Z,1528916175.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:15.909Z,1528916175.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:16.307Z,1528916176.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:16.708Z,1528916176.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:17.108Z,1528916177.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:17.518Z,1528916177.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:17.915Z,1528916177.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:18.315Z,1528916178.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:18.710Z,1528916178.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:19.167Z,1528916179.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:19.516Z,1528916179.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:19.906Z,1528916179.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:20.315Z,1528916180.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:20.718Z,1528916180.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:21.112Z,1528916181.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:21.510Z,1528916181.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:21.911Z,1528916181.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:22.306Z,1528916182.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:22.710Z,1528916182.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:23.111Z,1528916183.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:23.513Z,1528916183.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:23.919Z,1528916183.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:24.316Z,1528916184.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:24.706Z,1528916184.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:25.106Z,1528916185.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:25.513Z,1528916185.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:25.906Z,1528916185.906 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:25.906Z,1528916185.906 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 309
2018-06-13T18:56:25.907Z,1528916185.907 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:56:25.908Z,1528916185.908 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:25.908Z,1528916185.908 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 309
2018-06-13T18:56:25.908Z,1528916185.908 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:56:25.910Z,1528916185.910 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:25.910Z,1528916185.910 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 309
2018-06-13T18:56:25.911Z,1528916185.911 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:56:25.989Z,1528916185.989 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:56:25.989Z,1528916185.989 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:56:25.990Z,1528916185.990 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:56:26.398Z,1528916186.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:56:26.398Z,1528916186.398 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 309
2018-06-13T18:56:26.399Z,1528916186.399 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:56:26.399Z,1528916186.399 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 309
2018-06-13T18:56:26.399Z,1528916186.399 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:56:26.399Z,1528916186.399 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 309
2018-06-13T18:56:26.719Z,1528916186.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:56:26.720Z,1528916186.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:56:26.720Z,1528916186.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:56:26.720Z,1528916186.720 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:56:26.721Z,1528916186.721 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:56:26.721Z,1528916186.721 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:56:26.722Z,1528916186.722 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:56:26.722Z,1528916186.722 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:56:26.722Z,1528916186.722 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:56:27.118Z,1528916187.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:56:27.119Z,1528916187.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:27.517Z,1528916187.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:56:27.518Z,1528916187.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:27.919Z,1528916187.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:56:27.920Z,1528916187.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:28.296Z,1528916188.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:56:28.313Z,1528916188.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:28.709Z,1528916188.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:56:28.710Z,1528916188.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:29.100Z,1528916189.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:56:29.101Z,1528916189.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:29.529Z,1528916189.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:56:29.530Z,1528916189.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:29.927Z,1528916189.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:56:29.928Z,1528916189.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:30.328Z,1528916190.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:56:30.329Z,1528916190.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:30.704Z,1528916190.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:56:30.705Z,1528916190.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:31.103Z,1528916191.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:56:31.104Z,1528916191.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:31.504Z,1528916191.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:56:31.505Z,1528916191.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:31.903Z,1528916191.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:56:31.904Z,1528916191.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:32.331Z,1528916192.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:56:32.331Z,1528916192.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:32.714Z,1528916192.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:56:32.715Z,1528916192.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:33.112Z,1528916193.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:56:33.113Z,1528916193.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:33.505Z,1528916193.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:56:33.506Z,1528916193.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:33.907Z,1528916193.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:56:33.908Z,1528916193.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:34.303Z,1528916194.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:56:34.304Z,1528916194.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:34.708Z,1528916194.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:56:34.709Z,1528916194.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:35.107Z,1528916195.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:56:35.108Z,1528916195.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:35.512Z,1528916195.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:56:35.513Z,1528916195.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:35.914Z,1528916195.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T18:56:35.915Z,1528916195.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:36.316Z,1528916196.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:56:36.317Z,1528916196.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:36.704Z,1528916196.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:56:36.705Z,1528916196.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:37.107Z,1528916197.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T18:56:37.108Z,1528916197.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:37.509Z,1528916197.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:56:37.510Z,1528916197.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:37.907Z,1528916197.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:56:37.908Z,1528916197.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:38.313Z,1528916198.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:56:38.314Z,1528916198.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:38.719Z,1528916198.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:56:38.720Z,1528916198.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:39.125Z,1528916199.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:56:39.126Z,1528916199.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:39.510Z,1528916199.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:56:39.511Z,1528916199.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:39.909Z,1528916199.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:56:39.910Z,1528916199.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:40.306Z,1528916200.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:56:40.307Z,1528916200.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:40.712Z,1528916200.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T18:56:40.713Z,1528916200.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:41.108Z,1528916201.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:56:41.110Z,1528916201.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:41.514Z,1528916201.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:56:41.515Z,1528916201.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:41.947Z,1528916201.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:56:41.948Z,1528916201.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:42.317Z,1528916202.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:56:42.318Z,1528916202.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:42.704Z,1528916202.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:56:42.705Z,1528916202.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:43.106Z,1528916203.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:56:43.107Z,1528916203.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:43.503Z,1528916203.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:56:43.504Z,1528916203.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:43.907Z,1528916203.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:56:43.908Z,1528916203.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:44.315Z,1528916204.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:56:44.316Z,1528916204.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:44.715Z,1528916204.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:56:44.716Z,1528916204.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:45.112Z,1528916205.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T18:56:45.113Z,1528916205.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:45.508Z,1528916205.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T18:56:45.509Z,1528916205.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:45.912Z,1528916205.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:46.315Z,1528916206.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:46.720Z,1528916206.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:47.115Z,1528916207.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:47.505Z,1528916207.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:47.911Z,1528916207.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:48.317Z,1528916208.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:48.716Z,1528916208.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:49.113Z,1528916209.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:49.503Z,1528916209.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:49.906Z,1528916209.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:50.320Z,1528916210.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:50.717Z,1528916210.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:51.116Z,1528916211.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:51.522Z,1528916211.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:51.906Z,1528916211.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:52.315Z,1528916212.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:52.720Z,1528916212.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:53.120Z,1528916213.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:53.507Z,1528916213.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:53.910Z,1528916213.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:54.320Z,1528916214.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:54.721Z,1528916214.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:55.120Z,1528916215.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:55.509Z,1528916215.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:55.906Z,1528916215.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:55.909Z,1528916215.909 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T18:56:55.909Z,1528916215.909 [Default:CheckIn:C.Wait] Stopped
2018-06-13T18:56:55.910Z,1528916215.910 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T18:56:55.910Z,1528916215.910 [Default:CheckIn:D] Running Loop=1
2018-06-13T18:56:56.320Z,1528916216.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:56.323Z,1528916216.323 [Default:CheckIn:D] Stopped
2018-06-13T18:56:56.323Z,1528916216.323 [Default:CheckIn:E] Running Loop=1
2018-06-13T18:56:56.724Z,1528916216.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:56.727Z,1528916216.727 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 929.714648 min 
2018-06-13T18:56:56.727Z,1528916216.727 [Default:CheckIn:E] Stopped
2018-06-13T18:56:56.727Z,1528916216.727 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T18:56:56.727Z,1528916216.727 [Default:CheckIn] Stopped
2018-06-13T18:56:56.728Z,1528916216.728 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T18:56:56.728Z,1528916216.728 [Default:CheckIn](INFO): Running loop #90
2018-06-13T18:56:56.728Z,1528916216.728 [Default:CheckIn] Running Loop=90
2018-06-13T18:56:56.728Z,1528916216.728 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T18:56:56.728Z,1528916216.728 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T18:56:59.824Z,1528916219.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:56:59.999Z,1528916219.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:00.373Z,1528916220.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:00.766Z,1528916220.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:01.170Z,1528916221.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:01.574Z,1528916221.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:01.973Z,1528916221.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:02.371Z,1528916222.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:02.767Z,1528916222.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:03.172Z,1528916223.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:03.572Z,1528916223.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:03.973Z,1528916223.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:04.374Z,1528916224.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:04.773Z,1528916224.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:05.180Z,1528916225.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:05.574Z,1528916225.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:05.952Z,1528916225.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:06.377Z,1528916226.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:06.753Z,1528916226.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:07.152Z,1528916227.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:07.588Z,1528916227.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:07.987Z,1528916227.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:08.382Z,1528916228.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:08.757Z,1528916228.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:09.180Z,1528916229.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:09.560Z,1528916229.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:09.956Z,1528916229.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:10.384Z,1528916230.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:10.767Z,1528916230.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:11.192Z,1528916231.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:11.556Z,1528916231.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:11.956Z,1528916231.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:12.356Z,1528916232.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:12.760Z,1528916232.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:13.160Z,1528916233.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:13.567Z,1528916233.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:13.967Z,1528916233.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:14.367Z,1528916234.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:14.764Z,1528916234.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:15.164Z,1528916235.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:15.558Z,1528916235.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:15.960Z,1528916235.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:16.363Z,1528916236.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:16.767Z,1528916236.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:17.168Z,1528916237.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:17.560Z,1528916237.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:17.959Z,1528916237.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:18.360Z,1528916238.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:18.764Z,1528916238.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:19.158Z,1528916239.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:19.567Z,1528916239.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:19.988Z,1528916239.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:20.363Z,1528916240.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:20.761Z,1528916240.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:21.160Z,1528916241.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:21.565Z,1528916241.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:21.969Z,1528916241.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:22.376Z,1528916242.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:22.769Z,1528916242.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:23.176Z,1528916243.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:23.561Z,1528916243.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:23.968Z,1528916243.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:24.378Z,1528916244.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:24.772Z,1528916244.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:25.170Z,1528916245.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:25.566Z,1528916245.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:25.960Z,1528916245.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:26.370Z,1528916246.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:26.776Z,1528916246.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:27.175Z,1528916247.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:27.560Z,1528916247.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:27.956Z,1528916247.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:28.384Z,1528916248.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:28.787Z,1528916248.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:29.167Z,1528916249.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:29.560Z,1528916249.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:29.958Z,1528916249.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:30.368Z,1528916250.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:30.763Z,1528916250.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:31.163Z,1528916251.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:31.565Z,1528916251.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:31.964Z,1528916251.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:32.363Z,1528916252.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:32.767Z,1528916252.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:33.163Z,1528916253.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:33.558Z,1528916253.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:33.959Z,1528916253.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:34.367Z,1528916254.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:34.767Z,1528916254.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:35.168Z,1528916255.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:35.558Z,1528916255.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:35.964Z,1528916255.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:36.368Z,1528916256.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:36.763Z,1528916256.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:37.163Z,1528916257.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:37.559Z,1528916257.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:37.960Z,1528916257.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:38.364Z,1528916258.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:38.767Z,1528916258.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:39.163Z,1528916259.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:39.558Z,1528916259.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:39.959Z,1528916259.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:40.364Z,1528916260.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:40.767Z,1528916260.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:41.168Z,1528916261.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:41.560Z,1528916261.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:41.958Z,1528916261.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:42.368Z,1528916262.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:42.763Z,1528916262.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:43.164Z,1528916263.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:43.566Z,1528916263.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:43.959Z,1528916263.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:44.368Z,1528916264.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:44.767Z,1528916264.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:45.164Z,1528916265.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:45.561Z,1528916265.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:45.974Z,1528916265.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:46.371Z,1528916266.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:46.773Z,1528916266.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:47.174Z,1528916267.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:47.561Z,1528916267.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:47.969Z,1528916267.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:48.378Z,1528916268.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:48.775Z,1528916268.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:49.178Z,1528916269.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:49.576Z,1528916269.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:49.977Z,1528916269.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:50.383Z,1528916270.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:50.787Z,1528916270.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:51.160Z,1528916271.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:51.562Z,1528916271.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:51.972Z,1528916271.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:52.365Z,1528916272.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:52.767Z,1528916272.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:53.168Z,1528916273.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:53.564Z,1528916273.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:53.968Z,1528916273.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:54.372Z,1528916274.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:54.776Z,1528916274.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:55.168Z,1528916275.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:55.572Z,1528916275.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:55.964Z,1528916275.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:56.372Z,1528916276.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:56.773Z,1528916276.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:57.172Z,1528916277.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:57.564Z,1528916277.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:57:57.964Z,1528916277.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:01.116Z,1528916281.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:01.300Z,1528916281.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:01.670Z,1528916281.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:02.053Z,1528916282.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:02.452Z,1528916282.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:02.858Z,1528916282.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:03.254Z,1528916283.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:03.661Z,1528916283.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:04.073Z,1528916284.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:04.464Z,1528916284.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:04.862Z,1528916284.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:05.264Z,1528916285.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:05.658Z,1528916285.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:06.056Z,1528916286.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:06.474Z,1528916286.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:06.876Z,1528916286.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:07.276Z,1528916287.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:07.668Z,1528916287.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:08.052Z,1528916288.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:08.455Z,1528916288.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:08.854Z,1528916288.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:09.248Z,1528916289.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:09.657Z,1528916289.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:10.059Z,1528916290.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:10.457Z,1528916290.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:10.853Z,1528916290.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:11.253Z,1528916291.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:11.653Z,1528916291.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:12.052Z,1528916292.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:12.464Z,1528916292.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:12.857Z,1528916292.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:13.338Z,1528916293.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:13.652Z,1528916293.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:14.049Z,1528916294.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:14.454Z,1528916294.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:14.867Z,1528916294.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:15.249Z,1528916295.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:15.665Z,1528916295.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:16.064Z,1528916296.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:16.458Z,1528916296.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:16.852Z,1528916296.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:17.264Z,1528916297.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:17.649Z,1528916297.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:18.052Z,1528916298.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:18.469Z,1528916298.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:18.868Z,1528916298.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:19.268Z,1528916299.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:19.656Z,1528916299.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:20.052Z,1528916300.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:20.450Z,1528916300.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:20.853Z,1528916300.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:21.249Z,1528916301.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:21.668Z,1528916301.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:22.065Z,1528916302.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:22.457Z,1528916302.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:22.852Z,1528916302.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:23.256Z,1528916303.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:23.649Z,1528916303.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:24.051Z,1528916304.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:24.466Z,1528916304.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:24.868Z,1528916304.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:25.268Z,1528916305.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:25.656Z,1528916305.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:26.049Z,1528916306.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:26.464Z,1528916306.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:26.866Z,1528916306.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:27.257Z,1528916307.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:27.653Z,1528916307.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:28.052Z,1528916308.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:28.457Z,1528916308.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:28.868Z,1528916308.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:29.265Z,1528916309.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:29.649Z,1528916309.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:30.052Z,1528916310.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:30.465Z,1528916310.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:30.862Z,1528916310.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:31.268Z,1528916311.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:31.665Z,1528916311.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:32.048Z,1528916312.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:32.468Z,1528916312.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:32.872Z,1528916312.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:33.257Z,1528916313.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:33.653Z,1528916313.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:34.052Z,1528916314.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:34.468Z,1528916314.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:34.864Z,1528916314.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:35.272Z,1528916315.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:35.650Z,1528916315.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:36.052Z,1528916316.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:36.465Z,1528916316.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:36.868Z,1528916316.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:37.268Z,1528916317.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:37.654Z,1528916317.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:38.050Z,1528916318.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:38.468Z,1528916318.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:38.908Z,1528916318.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:39.272Z,1528916319.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:39.676Z,1528916319.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:40.083Z,1528916320.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:40.465Z,1528916320.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:40.872Z,1528916320.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:41.270Z,1528916321.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:41.653Z,1528916321.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:42.044Z,1528916322.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:42.471Z,1528916322.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:42.867Z,1528916322.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:43.270Z,1528916323.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:43.646Z,1528916323.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:44.052Z,1528916324.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:44.472Z,1528916324.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:44.872Z,1528916324.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:45.270Z,1528916325.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:45.649Z,1528916325.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:46.049Z,1528916326.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:46.471Z,1528916326.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:46.876Z,1528916326.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:47.288Z,1528916327.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:47.645Z,1528916327.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:48.050Z,1528916328.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:48.475Z,1528916328.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:48.855Z,1528916328.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:49.280Z,1528916329.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:49.653Z,1528916329.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:50.050Z,1528916330.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:50.456Z,1528916330.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:50.860Z,1528916330.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:51.258Z,1528916331.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:51.650Z,1528916331.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:52.051Z,1528916332.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:52.456Z,1528916332.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:52.859Z,1528916332.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:53.264Z,1528916333.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:53.652Z,1528916333.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:54.051Z,1528916334.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:54.459Z,1528916334.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:54.860Z,1528916334.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:55.260Z,1528916335.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:55.651Z,1528916335.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:56.048Z,1528916336.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:56.495Z,1528916336.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:58:56.908Z,1528916336.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:02.705Z,1528916342.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:02.874Z,1528916342.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:03.282Z,1528916343.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:03.671Z,1528916343.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:04.082Z,1528916344.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:04.479Z,1528916344.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:04.890Z,1528916344.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:05.291Z,1528916345.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:05.701Z,1528916345.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:06.068Z,1528916346.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:06.463Z,1528916346.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:06.902Z,1528916346.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:07.285Z,1528916347.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:07.704Z,1528916347.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:08.091Z,1528916348.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:08.490Z,1528916348.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:08.884Z,1528916348.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:09.294Z,1528916349.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:09.662Z,1528916349.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:10.086Z,1528916350.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:10.472Z,1528916350.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:10.879Z,1528916350.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:11.284Z,1528916351.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:11.684Z,1528916351.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:12.055Z,1528916352.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:12.493Z,1528916352.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:12.892Z,1528916352.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:13.296Z,1528916353.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:13.698Z,1528916353.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:14.098Z,1528916354.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:14.510Z,1528916354.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:14.864Z,1528916354.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:15.260Z,1528916355.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:15.658Z,1528916355.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:16.073Z,1528916356.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:16.473Z,1528916356.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:16.867Z,1528916356.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:17.272Z,1528916357.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:17.674Z,1528916357.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:18.105Z,1528916358.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:18.476Z,1528916358.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:18.884Z,1528916358.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:19.279Z,1528916359.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:19.707Z,1528916359.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:20.117Z,1528916360.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:20.489Z,1528916360.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:20.887Z,1528916360.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:21.282Z,1528916361.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:21.691Z,1528916361.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:22.092Z,1528916362.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:22.491Z,1528916362.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:22.880Z,1528916362.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:23.310Z,1528916363.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:23.674Z,1528916363.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:24.083Z,1528916364.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:24.482Z,1528916364.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:24.895Z,1528916364.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:25.283Z,1528916365.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:25.688Z,1528916365.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:26.096Z,1528916366.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:26.482Z,1528916366.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:26.872Z,1528916366.872 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:26.872Z,1528916366.872 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 310
2018-06-13T18:59:26.872Z,1528916366.872 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T18:59:26.884Z,1528916366.884 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:26.884Z,1528916366.884 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 310
2018-06-13T18:59:26.894Z,1528916366.894 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T18:59:26.896Z,1528916366.896 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:26.896Z,1528916366.896 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 310
2018-06-13T18:59:26.905Z,1528916366.905 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T18:59:26.998Z,1528916366.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T18:59:26.998Z,1528916366.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T18:59:26.998Z,1528916366.998 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T18:59:27.381Z,1528916367.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T18:59:27.381Z,1528916367.381 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 310
2018-06-13T18:59:27.382Z,1528916367.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T18:59:27.382Z,1528916367.382 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 310
2018-06-13T18:59:27.382Z,1528916367.382 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T18:59:27.382Z,1528916367.382 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 310
2018-06-13T18:59:27.675Z,1528916367.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T18:59:27.681Z,1528916367.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:59:27.681Z,1528916367.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:59:27.682Z,1528916367.682 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T18:59:27.683Z,1528916367.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:59:27.683Z,1528916367.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:59:27.684Z,1528916367.684 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T18:59:27.684Z,1528916367.684 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T18:59:27.705Z,1528916367.705 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T18:59:28.080Z,1528916368.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T18:59:28.085Z,1528916368.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:28.479Z,1528916368.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T18:59:28.480Z,1528916368.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:28.900Z,1528916368.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T18:59:28.921Z,1528916368.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:29.287Z,1528916369.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T18:59:29.287Z,1528916369.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:29.682Z,1528916369.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T18:59:29.683Z,1528916369.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:30.101Z,1528916370.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T18:59:30.102Z,1528916370.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:30.463Z,1528916370.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T18:59:30.464Z,1528916370.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:30.908Z,1528916370.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T18:59:30.913Z,1528916370.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:31.269Z,1528916371.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T18:59:31.271Z,1528916371.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:31.676Z,1528916371.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T18:59:31.678Z,1528916371.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:32.119Z,1528916372.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T18:59:32.120Z,1528916372.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:32.506Z,1528916372.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T18:59:32.507Z,1528916372.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:32.875Z,1528916372.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T18:59:32.875Z,1528916372.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:33.284Z,1528916373.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T18:59:33.319Z,1528916373.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:33.706Z,1528916373.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T18:59:33.707Z,1528916373.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:34.081Z,1528916374.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T18:59:34.082Z,1528916374.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:34.492Z,1528916374.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T18:59:34.493Z,1528916374.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:34.870Z,1528916374.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T18:59:34.871Z,1528916374.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:35.311Z,1528916375.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T18:59:35.312Z,1528916375.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:35.684Z,1528916375.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T18:59:35.709Z,1528916375.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:36.073Z,1528916376.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T18:59:36.074Z,1528916376.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:36.478Z,1528916376.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T18:59:36.479Z,1528916376.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:36.929Z,1528916376.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T18:59:36.930Z,1528916376.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:37.274Z,1528916377.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T18:59:37.275Z,1528916377.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:37.688Z,1528916377.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T18:59:37.693Z,1528916377.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:38.139Z,1528916378.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T18:59:38.140Z,1528916378.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:38.493Z,1528916378.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T18:59:38.494Z,1528916378.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:38.891Z,1528916378.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T18:59:38.892Z,1528916378.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:39.288Z,1528916379.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T18:59:39.303Z,1528916379.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:39.704Z,1528916379.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T18:59:39.709Z,1528916379.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:40.094Z,1528916380.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T18:59:40.095Z,1528916380.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:40.516Z,1528916380.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T18:59:40.517Z,1528916380.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:40.882Z,1528916380.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T18:59:40.883Z,1528916380.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:41.273Z,1528916381.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T18:59:41.274Z,1528916381.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:41.731Z,1528916381.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T18:59:41.732Z,1528916381.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:42.083Z,1528916382.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T18:59:42.084Z,1528916382.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:42.494Z,1528916382.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T18:59:42.495Z,1528916382.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:42.908Z,1528916382.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T18:59:42.941Z,1528916382.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:43.291Z,1528916383.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T18:59:43.291Z,1528916383.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:43.699Z,1528916383.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T18:59:43.700Z,1528916383.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:44.019Z,1528916384.019 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T18:59:44.019Z,1528916384.019 [NAL9602] Data Fault, FailCount= 5
2018-06-13T18:59:44.019Z,1528916384.019 [NAL9602](ERROR): Data Fault
2018-06-13T18:59:44.117Z,1528916384.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T18:59:44.118Z,1528916384.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:44.202Z,1528916384.202 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T18:59:44.202Z,1528916384.202 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T18:59:44.418Z,1528916384.418 [NAL9602](INFO): Powering down
2018-06-13T18:59:44.506Z,1528916384.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T18:59:44.506Z,1528916384.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:44.596Z,1528916384.596 [CBIT](INFO): Critical error at 20180613T185944
2018-06-13T18:59:44.912Z,1528916384.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T18:59:44.917Z,1528916384.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:45.272Z,1528916385.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T18:59:45.273Z,1528916385.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:45.680Z,1528916385.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T18:59:45.685Z,1528916385.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:46.076Z,1528916386.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T18:59:46.078Z,1528916386.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:46.495Z,1528916386.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T18:59:46.496Z,1528916386.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:46.887Z,1528916386.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:47.295Z,1528916387.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:47.672Z,1528916387.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:48.090Z,1528916388.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:48.476Z,1528916388.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:48.880Z,1528916388.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:49.267Z,1528916389.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:49.674Z,1528916389.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:50.083Z,1528916390.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:50.474Z,1528916390.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:50.866Z,1528916390.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:51.265Z,1528916391.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:51.683Z,1528916391.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:52.076Z,1528916392.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:52.493Z,1528916392.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:52.892Z,1528916392.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:53.288Z,1528916393.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:53.707Z,1528916393.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:54.079Z,1528916394.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:54.517Z,1528916394.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:54.917Z,1528916394.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:55.287Z,1528916395.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:55.689Z,1528916395.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:56.072Z,1528916396.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:56.472Z,1528916396.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:56.885Z,1528916396.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:57.316Z,1528916397.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:57.701Z,1528916397.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T18:59:58.107Z,1528916398.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:03.710Z,1528916403.710 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T19:00:03.710Z,1528916403.710 [BPC1] Communications Fault, FailCount= 1
2018-06-13T19:00:03.710Z,1528916403.710 [BPC1](ERROR): Communications Fault
2018-06-13T19:00:03.720Z,1528916403.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:03.829Z,1528916403.829 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T19:00:03.899Z,1528916403.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:04.293Z,1528916404.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:04.694Z,1528916404.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:04.785Z,1528916404.785 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T19:00:04.785Z,1528916404.785 [BPC1] No Fault, FailCount= 1
2018-06-13T19:00:05.139Z,1528916405.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:05.495Z,1528916405.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:05.871Z,1528916405.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:06.302Z,1528916406.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:06.722Z,1528916406.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:07.112Z,1528916407.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:07.515Z,1528916407.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:07.892Z,1528916407.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:08.292Z,1528916408.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:08.700Z,1528916408.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:09.128Z,1528916409.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:09.481Z,1528916409.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:09.896Z,1528916409.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:10.316Z,1528916410.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:10.712Z,1528916410.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:11.109Z,1528916411.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:11.506Z,1528916411.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:11.914Z,1528916411.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:12.303Z,1528916412.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:12.678Z,1528916412.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:13.146Z,1528916413.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:13.512Z,1528916413.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:13.911Z,1528916413.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:14.328Z,1528916414.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:14.739Z,1528916414.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:15.096Z,1528916415.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:15.502Z,1528916415.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:15.890Z,1528916415.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:16.307Z,1528916416.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:16.738Z,1528916416.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:17.095Z,1528916417.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:17.508Z,1528916417.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:17.896Z,1528916417.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:18.313Z,1528916418.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:18.710Z,1528916418.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:19.098Z,1528916419.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:19.500Z,1528916419.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:19.919Z,1528916419.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:20.311Z,1528916420.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:20.702Z,1528916420.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:21.117Z,1528916421.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:21.488Z,1528916421.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:21.891Z,1528916421.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:22.322Z,1528916422.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:22.739Z,1528916422.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:23.103Z,1528916423.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:23.494Z,1528916423.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:23.922Z,1528916423.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:24.307Z,1528916424.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:24.717Z,1528916424.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:25.109Z,1528916425.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:25.507Z,1528916425.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:25.902Z,1528916425.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:26.328Z,1528916426.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:26.680Z,1528916426.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:27.117Z,1528916427.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:27.513Z,1528916427.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:27.896Z,1528916427.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:28.288Z,1528916428.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:28.684Z,1528916428.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:29.094Z,1528916429.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:29.496Z,1528916429.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:29.904Z,1528916429.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:30.304Z,1528916430.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:30.705Z,1528916430.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:31.115Z,1528916431.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:31.471Z,1528916431.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:31.896Z,1528916431.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:32.288Z,1528916432.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:32.683Z,1528916432.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:33.089Z,1528916433.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:33.491Z,1528916433.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:33.902Z,1528916433.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:34.317Z,1528916434.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:34.710Z,1528916434.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:35.088Z,1528916435.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:35.479Z,1528916435.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:35.939Z,1528916435.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:36.315Z,1528916436.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:36.692Z,1528916436.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:37.123Z,1528916437.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:37.482Z,1528916437.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:37.902Z,1528916437.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:38.289Z,1528916438.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:38.692Z,1528916438.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:39.106Z,1528916439.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:39.547Z,1528916439.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:39.896Z,1528916439.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:40.317Z,1528916440.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:40.712Z,1528916440.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:41.073Z,1528916441.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:41.506Z,1528916441.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:41.940Z,1528916441.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:42.326Z,1528916442.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:42.712Z,1528916442.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:43.089Z,1528916443.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:43.491Z,1528916443.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:43.897Z,1528916443.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:44.327Z,1528916444.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:44.681Z,1528916444.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:45.088Z,1528916445.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:45.494Z,1528916445.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:45.908Z,1528916445.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:46.283Z,1528916446.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:46.694Z,1528916446.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:47.100Z,1528916447.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:47.503Z,1528916447.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:47.892Z,1528916447.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:48.313Z,1528916448.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:48.720Z,1528916448.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:49.137Z,1528916449.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:49.483Z,1528916449.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:49.898Z,1528916449.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:50.340Z,1528916450.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:50.694Z,1528916450.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:51.101Z,1528916451.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:51.542Z,1528916451.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:51.905Z,1528916451.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:52.313Z,1528916452.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:52.712Z,1528916452.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:53.119Z,1528916453.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:53.484Z,1528916453.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:53.922Z,1528916453.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:54.316Z,1528916454.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:54.728Z,1528916454.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:55.131Z,1528916455.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:55.483Z,1528916455.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:55.892Z,1528916455.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:56.296Z,1528916456.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:56.719Z,1528916456.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:57.096Z,1528916457.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:57.524Z,1528916457.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:57.916Z,1528916457.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:00:58.306Z,1528916458.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:03.959Z,1528916463.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:04.136Z,1528916464.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:04.532Z,1528916464.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:04.937Z,1528916464.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:05.326Z,1528916465.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:05.764Z,1528916465.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:06.143Z,1528916466.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:06.522Z,1528916466.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:06.919Z,1528916466.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:07.356Z,1528916467.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:07.714Z,1528916467.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:08.110Z,1528916468.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:08.514Z,1528916468.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:08.927Z,1528916468.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:09.338Z,1528916469.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:09.739Z,1528916469.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:10.132Z,1528916470.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:10.507Z,1528916470.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:10.947Z,1528916470.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:11.317Z,1528916471.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:11.736Z,1528916471.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:12.110Z,1528916472.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:12.551Z,1528916472.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:12.980Z,1528916472.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:13.312Z,1528916473.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:13.702Z,1528916473.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:14.135Z,1528916474.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:14.557Z,1528916474.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:14.909Z,1528916474.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:15.321Z,1528916475.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:15.740Z,1528916475.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:16.094Z,1528916476.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:16.523Z,1528916476.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:16.935Z,1528916476.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:17.312Z,1528916477.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:17.708Z,1528916477.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:18.190Z,1528916478.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:18.524Z,1528916478.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:18.924Z,1528916478.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:19.327Z,1528916479.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:19.741Z,1528916479.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:20.100Z,1528916480.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:20.551Z,1528916480.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:20.906Z,1528916480.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:21.309Z,1528916481.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:21.761Z,1528916481.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:22.097Z,1528916482.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:22.552Z,1528916482.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:22.930Z,1528916482.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:23.337Z,1528916483.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:23.727Z,1528916483.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:24.145Z,1528916484.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:24.512Z,1528916484.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:24.906Z,1528916484.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:25.357Z,1528916485.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:25.722Z,1528916485.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:26.127Z,1528916486.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:26.552Z,1528916486.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:26.916Z,1528916486.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:27.325Z,1528916487.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:27.736Z,1528916487.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:28.135Z,1528916488.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:28.511Z,1528916488.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:28.950Z,1528916488.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:29.309Z,1528916489.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:29.724Z,1528916489.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:30.120Z,1528916490.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:30.518Z,1528916490.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:30.926Z,1528916490.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:31.355Z,1528916491.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:31.721Z,1528916491.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:32.118Z,1528916492.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:32.509Z,1528916492.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:32.898Z,1528916492.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:33.333Z,1528916493.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:33.780Z,1528916493.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:34.114Z,1528916494.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:34.550Z,1528916494.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:34.932Z,1528916494.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:35.324Z,1528916495.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:35.712Z,1528916495.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:36.149Z,1528916496.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:36.518Z,1528916496.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:36.930Z,1528916496.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:37.322Z,1528916497.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:37.703Z,1528916497.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:38.103Z,1528916498.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:38.539Z,1528916498.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:38.937Z,1528916498.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:39.329Z,1528916499.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:39.751Z,1528916499.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:40.104Z,1528916500.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:40.551Z,1528916500.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:40.947Z,1528916500.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:41.312Z,1528916501.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:41.718Z,1528916501.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:42.164Z,1528916502.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:42.513Z,1528916502.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:42.923Z,1528916502.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:43.319Z,1528916503.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:43.723Z,1528916503.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:44.136Z,1528916504.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:44.255Z,1528916504.255 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T19:01:44.255Z,1528916504.255 [NAL9602] No Fault, FailCount= 5
2018-06-13T19:01:44.474Z,1528916504.474 [NAL9602](INFO): Powering up NAL9602
2018-06-13T19:01:44.587Z,1528916504.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:44.939Z,1528916504.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:45.334Z,1528916505.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:45.718Z,1528916505.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:46.127Z,1528916506.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:46.605Z,1528916506.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:46.923Z,1528916506.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:47.298Z,1528916507.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:47.755Z,1528916507.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:48.109Z,1528916508.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:48.503Z,1528916508.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:48.919Z,1528916508.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:49.343Z,1528916509.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:49.717Z,1528916509.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:50.145Z,1528916510.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:50.539Z,1528916510.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:50.908Z,1528916510.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:51.315Z,1528916511.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:51.699Z,1528916511.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:52.100Z,1528916512.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:52.500Z,1528916512.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:52.899Z,1528916512.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:53.298Z,1528916513.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:53.699Z,1528916513.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:54.099Z,1528916514.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:54.498Z,1528916514.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:54.898Z,1528916514.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:55.309Z,1528916515.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:55.658Z,1528916515.658 [NAL9602](INFO): NAL9602 initialized
2018-06-13T19:01:55.705Z,1528916515.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:56.103Z,1528916516.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:56.516Z,1528916516.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:56.948Z,1528916516.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:56.952Z,1528916516.952 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T18:56:56.7Z
2018-06-13T19:01:56.952Z,1528916516.952 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T19:01:56.952Z,1528916516.952 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T19:01:57.324Z,1528916517.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:58.464Z,1528916518.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:58.623Z,1528916518.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:59.022Z,1528916519.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:59.445Z,1528916519.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:01:59.823Z,1528916519.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:00.241Z,1528916520.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:00.612Z,1528916520.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:03.709Z,1528916523.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:03.798Z,1528916523.798 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180613T032335/Courier0360.lzma
2018-06-13T19:02:03.862Z,1528916523.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:04.258Z,1528916524.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:04.594Z,1528916524.594 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0360.lzma.bak
2018-06-13T19:02:04.594Z,1528916524.594 [DataOverHttps](INFO): SBD MOMSN=8329762
2018-06-13T19:02:04.675Z,1528916524.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:06.571Z,1528916526.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:06.728Z,1528916526.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:07.153Z,1528916527.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:07.552Z,1528916527.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:07.954Z,1528916527.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:11.085Z,1528916531.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:11.256Z,1528916531.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:11.631Z,1528916531.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:12.034Z,1528916532.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:12.432Z,1528916532.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:12.825Z,1528916532.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:15.933Z,1528916535.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:16.037Z,1528916536.037 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180613T032335/Express0361.lzma
2018-06-13T19:02:16.108Z,1528916536.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:16.509Z,1528916536.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:16.838Z,1528916536.838 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0361.lzma.bak
2018-06-13T19:02:16.838Z,1528916536.838 [DataOverHttps](INFO): SBD MOMSN=8329765
2018-06-13T19:02:16.911Z,1528916536.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:18.831Z,1528916538.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:18.834Z,1528916538.834 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T19:02:18.834Z,1528916538.834 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T19:02:18.834Z,1528916538.834 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T19:02:19.007Z,1528916539.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:19.388Z,1528916539.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:19.780Z,1528916539.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:20.191Z,1528916540.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:23.375Z,1528916543.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:23.584Z,1528916543.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:23.936Z,1528916543.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:24.321Z,1528916544.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:24.715Z,1528916544.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:25.117Z,1528916545.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:25.532Z,1528916545.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:25.926Z,1528916545.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:26.323Z,1528916546.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:26.764Z,1528916546.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:27.135Z,1528916547.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:27.560Z,1528916547.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:28.020Z,1528916548.020 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:28.051Z,1528916548.051 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 311
2018-06-13T19:02:28.051Z,1528916548.051 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:02:28.125Z,1528916548.125 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:28.125Z,1528916548.125 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 311
2018-06-13T19:02:28.125Z,1528916548.125 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:02:28.127Z,1528916548.127 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:28.127Z,1528916548.127 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 311
2018-06-13T19:02:28.127Z,1528916548.127 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:02:28.239Z,1528916548.239 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:02:28.239Z,1528916548.239 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:02:28.239Z,1528916548.239 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:02:28.449Z,1528916548.449 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:02:28.449Z,1528916548.449 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 311
2018-06-13T19:02:28.450Z,1528916548.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:02:28.450Z,1528916548.450 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 311
2018-06-13T19:02:28.450Z,1528916548.450 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:02:28.450Z,1528916548.450 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 311
2018-06-13T19:02:28.724Z,1528916548.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:02:28.724Z,1528916548.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:02:28.724Z,1528916548.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:02:28.725Z,1528916548.725 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:02:28.725Z,1528916548.725 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:02:28.726Z,1528916548.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:02:28.726Z,1528916548.726 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:02:28.726Z,1528916548.726 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:02:28.727Z,1528916548.727 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:02:29.121Z,1528916549.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2018-06-13T19:02:29.122Z,1528916549.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:29.512Z,1528916549.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2018-06-13T19:02:29.513Z,1528916549.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:29.927Z,1528916549.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2018-06-13T19:02:29.928Z,1528916549.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:30.316Z,1528916550.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2018-06-13T19:02:30.317Z,1528916550.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:30.714Z,1528916550.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s.
2018-06-13T19:02:30.715Z,1528916550.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:31.113Z,1528916551.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2018-06-13T19:02:31.114Z,1528916551.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:31.529Z,1528916551.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2018-06-13T19:02:31.530Z,1528916551.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:31.924Z,1528916551.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2018-06-13T19:02:31.925Z,1528916551.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:32.328Z,1528916552.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-06-13T19:02:32.329Z,1528916552.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:32.711Z,1528916552.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2018-06-13T19:02:32.712Z,1528916552.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:33.120Z,1528916553.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-06-13T19:02:33.125Z,1528916553.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:33.515Z,1528916553.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T19:02:33.515Z,1528916553.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:33.914Z,1528916553.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T19:02:33.915Z,1528916553.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:34.324Z,1528916554.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T19:02:34.325Z,1528916554.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:34.739Z,1528916554.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T19:02:34.740Z,1528916554.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:35.131Z,1528916555.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T19:02:35.132Z,1528916555.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:35.536Z,1528916555.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T19:02:35.537Z,1528916555.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:35.924Z,1528916555.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T19:02:35.925Z,1528916555.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:36.321Z,1528916556.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T19:02:36.322Z,1528916556.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:36.740Z,1528916556.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T19:02:36.740Z,1528916556.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:37.119Z,1528916557.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T19:02:37.120Z,1528916557.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:37.529Z,1528916557.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T19:02:37.530Z,1528916557.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:37.936Z,1528916557.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T19:02:37.937Z,1528916557.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:38.336Z,1528916558.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T19:02:38.341Z,1528916558.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:38.707Z,1528916558.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T19:02:38.708Z,1528916558.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:39.113Z,1528916559.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T19:02:39.114Z,1528916559.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:39.512Z,1528916559.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T19:02:39.513Z,1528916559.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:39.910Z,1528916559.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T19:02:39.911Z,1528916559.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:40.336Z,1528916560.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T19:02:40.337Z,1528916560.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:40.736Z,1528916560.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-06-13T19:02:40.736Z,1528916560.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:41.138Z,1528916561.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-06-13T19:02:41.139Z,1528916561.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:41.510Z,1528916561.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-06-13T19:02:41.511Z,1528916561.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:41.911Z,1528916561.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T19:02:41.912Z,1528916561.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:42.310Z,1528916562.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-06-13T19:02:42.311Z,1528916562.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:42.739Z,1528916562.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T19:02:42.740Z,1528916562.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:43.140Z,1528916563.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-06-13T19:02:43.141Z,1528916563.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:43.533Z,1528916563.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T19:02:43.534Z,1528916563.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:43.942Z,1528916563.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T19:02:43.943Z,1528916563.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:44.319Z,1528916564.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-06-13T19:02:44.320Z,1528916564.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:44.713Z,1528916564.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-06-13T19:02:44.714Z,1528916564.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:45.112Z,1528916565.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T19:02:45.114Z,1528916565.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:45.518Z,1528916565.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T19:02:45.519Z,1528916565.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:45.923Z,1528916565.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T19:02:45.924Z,1528916565.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:46.322Z,1528916566.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T19:02:46.323Z,1528916566.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:46.721Z,1528916566.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T19:02:46.722Z,1528916566.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:47.124Z,1528916567.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T19:02:47.145Z,1528916567.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:47.547Z,1528916567.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T19:02:47.548Z,1528916567.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:47.915Z,1528916567.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T19:02:47.916Z,1528916567.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:48.314Z,1528916568.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:48.723Z,1528916568.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:49.143Z,1528916569.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:49.524Z,1528916569.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:49.928Z,1528916569.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:50.328Z,1528916570.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:50.728Z,1528916570.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:51.115Z,1528916571.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:51.518Z,1528916571.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:51.911Z,1528916571.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:52.348Z,1528916572.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:52.724Z,1528916572.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:53.123Z,1528916573.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:53.515Z,1528916573.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:53.929Z,1528916573.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:54.318Z,1528916574.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:54.716Z,1528916574.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:55.116Z,1528916575.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:55.551Z,1528916575.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:55.924Z,1528916575.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:56.324Z,1528916576.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:56.715Z,1528916576.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:57.132Z,1528916577.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:57.521Z,1528916577.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:57.930Z,1528916577.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:58.330Z,1528916578.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:58.776Z,1528916578.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:59.162Z,1528916579.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:59.524Z,1528916579.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:02:59.922Z,1528916579.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:00.318Z,1528916580.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:00.729Z,1528916580.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:01.124Z,1528916581.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:01.584Z,1528916581.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:01.962Z,1528916581.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:02.342Z,1528916582.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:02.726Z,1528916582.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:03.118Z,1528916583.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:03.506Z,1528916583.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:03.907Z,1528916583.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:04.336Z,1528916584.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:04.740Z,1528916584.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:05.151Z,1528916585.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:05.506Z,1528916585.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:05.914Z,1528916585.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:06.316Z,1528916586.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:06.711Z,1528916586.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:07.116Z,1528916587.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:07.541Z,1528916587.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:07.943Z,1528916587.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:08.342Z,1528916588.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:08.712Z,1528916588.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:09.112Z,1528916589.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:09.521Z,1528916589.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:09.912Z,1528916589.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:10.320Z,1528916590.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:10.731Z,1528916590.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:11.158Z,1528916591.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:11.536Z,1528916591.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:11.916Z,1528916591.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:12.319Z,1528916592.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:12.722Z,1528916592.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:13.112Z,1528916593.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:13.526Z,1528916593.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:13.927Z,1528916593.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:14.336Z,1528916594.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:14.723Z,1528916594.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:15.116Z,1528916595.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:15.522Z,1528916595.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:15.933Z,1528916595.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:16.329Z,1528916596.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:16.727Z,1528916596.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:17.142Z,1528916597.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:17.549Z,1528916597.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:17.953Z,1528916597.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:18.347Z,1528916598.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:18.715Z,1528916598.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:19.139Z,1528916599.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:19.512Z,1528916599.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:22.653Z,1528916602.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:22.815Z,1528916602.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:23.206Z,1528916603.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:23.616Z,1528916603.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:24.014Z,1528916604.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:24.432Z,1528916604.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:24.838Z,1528916604.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:25.229Z,1528916605.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:25.626Z,1528916605.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:26.027Z,1528916606.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:26.433Z,1528916606.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:26.837Z,1528916606.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:27.239Z,1528916607.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:27.637Z,1528916607.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:28.011Z,1528916608.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:28.445Z,1528916608.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:28.824Z,1528916608.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:29.230Z,1528916609.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:29.599Z,1528916609.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:29.992Z,1528916609.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:30.428Z,1528916610.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:30.794Z,1528916610.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:31.197Z,1528916611.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:31.624Z,1528916611.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:31.997Z,1528916611.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:32.401Z,1528916612.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:32.805Z,1528916612.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:33.188Z,1528916613.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:33.591Z,1528916613.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:33.996Z,1528916613.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:34.402Z,1528916614.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:34.804Z,1528916614.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:35.208Z,1528916615.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:35.600Z,1528916615.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:35.994Z,1528916615.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:36.396Z,1528916616.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:36.796Z,1528916616.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:37.245Z,1528916617.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:37.604Z,1528916617.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:38.001Z,1528916618.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:38.408Z,1528916618.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:38.808Z,1528916618.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:39.200Z,1528916619.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:39.612Z,1528916619.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:40.000Z,1528916620.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:40.416Z,1528916620.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:40.829Z,1528916620.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:41.216Z,1528916621.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:41.603Z,1528916621.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:42.008Z,1528916622.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:42.416Z,1528916622.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:42.794Z,1528916622.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:43.196Z,1528916623.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:43.620Z,1528916623.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:44.036Z,1528916624.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:44.453Z,1528916624.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:44.804Z,1528916624.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:45.215Z,1528916625.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:45.601Z,1528916625.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:46.003Z,1528916626.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:46.409Z,1528916626.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:46.816Z,1528916626.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:47.213Z,1528916627.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:47.587Z,1528916627.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:47.990Z,1528916627.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:48.423Z,1528916628.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:48.789Z,1528916628.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:49.190Z,1528916629.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:49.616Z,1528916629.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:50.032Z,1528916630.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:50.433Z,1528916630.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:50.834Z,1528916630.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:51.198Z,1528916631.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:51.663Z,1528916631.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:52.042Z,1528916632.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:52.428Z,1528916632.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:52.838Z,1528916632.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:53.240Z,1528916633.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:53.626Z,1528916633.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:54.030Z,1528916634.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:54.416Z,1528916634.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:54.798Z,1528916634.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:55.208Z,1528916635.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:55.631Z,1528916635.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:56.042Z,1528916636.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:56.436Z,1528916636.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:56.830Z,1528916636.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:57.211Z,1528916637.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:57.610Z,1528916637.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:58.025Z,1528916638.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:58.419Z,1528916638.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:58.831Z,1528916638.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:59.217Z,1528916639.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:03:59.621Z,1528916639.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:00.003Z,1528916640.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:00.441Z,1528916640.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:00.809Z,1528916640.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:01.188Z,1528916641.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:01.602Z,1528916641.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:02.026Z,1528916642.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:02.422Z,1528916642.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:02.826Z,1528916642.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:03.220Z,1528916643.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:03.600Z,1528916643.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:04.027Z,1528916644.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:04.420Z,1528916644.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:04.816Z,1528916644.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:05.258Z,1528916645.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:05.633Z,1528916645.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:06.022Z,1528916646.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:06.402Z,1528916646.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:06.794Z,1528916646.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:07.231Z,1528916647.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:07.641Z,1528916647.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:08.011Z,1528916648.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:08.447Z,1528916648.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:08.811Z,1528916648.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:09.212Z,1528916649.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:09.631Z,1528916649.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:10.015Z,1528916650.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:10.412Z,1528916650.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:10.842Z,1528916650.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:11.208Z,1528916651.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:11.611Z,1528916651.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:12.022Z,1528916652.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:12.434Z,1528916652.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:12.824Z,1528916652.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:13.244Z,1528916653.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:13.634Z,1528916653.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:14.003Z,1528916654.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:14.413Z,1528916654.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:14.803Z,1528916654.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:15.222Z,1528916655.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:15.581Z,1528916655.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:16.007Z,1528916656.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:16.418Z,1528916656.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:16.837Z,1528916656.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:17.195Z,1528916657.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:17.603Z,1528916657.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:18.063Z,1528916658.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:18.442Z,1528916658.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:18.796Z,1528916658.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:19.220Z,1528916659.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:19.618Z,1528916659.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:20.011Z,1528916660.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:20.406Z,1528916660.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:20.821Z,1528916660.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:27.307Z,1528916667.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:27.480Z,1528916667.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:27.889Z,1528916667.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:28.264Z,1528916668.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:28.679Z,1528916668.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:29.084Z,1528916669.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:29.482Z,1528916669.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:29.876Z,1528916669.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:30.312Z,1528916670.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:30.692Z,1528916670.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:31.064Z,1528916671.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:31.456Z,1528916671.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:31.873Z,1528916671.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:32.278Z,1528916672.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:32.735Z,1528916672.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:33.081Z,1528916673.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:33.480Z,1528916673.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:33.885Z,1528916673.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:34.279Z,1528916674.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:34.672Z,1528916674.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:35.099Z,1528916675.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:35.480Z,1528916675.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:35.872Z,1528916675.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:36.274Z,1528916676.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:36.680Z,1528916676.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:37.079Z,1528916677.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:37.447Z,1528916677.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:37.888Z,1528916677.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:38.287Z,1528916678.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:38.696Z,1528916678.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:39.087Z,1528916679.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:39.503Z,1528916679.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:39.855Z,1528916679.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:40.253Z,1528916680.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:40.654Z,1528916680.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:41.094Z,1528916681.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:41.474Z,1528916681.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:41.880Z,1528916681.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:42.284Z,1528916682.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:42.681Z,1528916682.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:43.076Z,1528916683.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:43.487Z,1528916683.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:43.880Z,1528916683.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:44.283Z,1528916684.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:44.687Z,1528916684.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:45.098Z,1528916685.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:45.490Z,1528916685.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:45.880Z,1528916685.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:46.261Z,1528916686.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:46.666Z,1528916686.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:47.071Z,1528916687.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:47.461Z,1528916687.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:47.918Z,1528916687.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:48.331Z,1528916688.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:48.668Z,1528916688.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:49.064Z,1528916689.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:49.496Z,1528916689.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:49.882Z,1528916689.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:50.290Z,1528916690.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:50.686Z,1528916690.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:51.080Z,1528916691.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:51.482Z,1528916691.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:51.898Z,1528916691.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:52.261Z,1528916692.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:52.699Z,1528916692.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:53.106Z,1528916693.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:53.461Z,1528916693.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:53.864Z,1528916693.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:54.278Z,1528916694.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:54.667Z,1528916694.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:55.103Z,1528916695.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:55.517Z,1528916695.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:55.883Z,1528916695.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:56.286Z,1528916696.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:56.688Z,1528916696.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:57.062Z,1528916697.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:57.492Z,1528916697.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:57.872Z,1528916697.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:58.279Z,1528916698.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:58.670Z,1528916698.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:59.067Z,1528916699.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:59.475Z,1528916699.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:04:59.912Z,1528916699.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:00.290Z,1528916700.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:00.676Z,1528916700.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:01.082Z,1528916701.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:01.500Z,1528916701.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:01.928Z,1528916701.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:02.282Z,1528916702.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:02.682Z,1528916702.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:03.068Z,1528916703.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:03.487Z,1528916703.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:03.907Z,1528916703.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:04.303Z,1528916704.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:04.666Z,1528916704.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:05.084Z,1528916705.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:05.476Z,1528916705.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:05.872Z,1528916705.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:06.326Z,1528916706.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:06.681Z,1528916706.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:07.071Z,1528916707.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:07.498Z,1528916707.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:07.906Z,1528916707.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:08.280Z,1528916708.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:08.656Z,1528916708.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:09.062Z,1528916709.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:09.496Z,1528916709.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:09.896Z,1528916709.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:10.280Z,1528916710.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:10.677Z,1528916710.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:11.086Z,1528916711.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:11.484Z,1528916711.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:11.884Z,1528916711.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:12.285Z,1528916712.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:12.666Z,1528916712.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:13.068Z,1528916713.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:13.478Z,1528916713.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:13.880Z,1528916713.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:14.275Z,1528916714.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:14.671Z,1528916714.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:15.068Z,1528916715.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:15.468Z,1528916715.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:15.872Z,1528916715.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:16.283Z,1528916716.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:16.685Z,1528916716.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:17.084Z,1528916717.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:17.501Z,1528916717.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:17.891Z,1528916717.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:18.262Z,1528916718.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:18.659Z,1528916718.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:19.103Z,1528916719.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:19.492Z,1528916719.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:19.878Z,1528916719.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:20.283Z,1528916720.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:20.676Z,1528916720.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:21.066Z,1528916721.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:27.419Z,1528916727.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:27.613Z,1528916727.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:27.992Z,1528916727.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:28.390Z,1528916728.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:28.796Z,1528916728.796 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:28.796Z,1528916728.796 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 312
2018-06-13T19:05:28.796Z,1528916728.796 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:05:28.802Z,1528916728.802 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:28.803Z,1528916728.803 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 312
2018-06-13T19:05:28.803Z,1528916728.803 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:05:28.804Z,1528916728.804 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:28.804Z,1528916728.804 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 312
2018-06-13T19:05:28.809Z,1528916728.809 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:05:28.922Z,1528916728.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:05:28.922Z,1528916728.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:05:28.923Z,1528916728.923 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:05:29.242Z,1528916729.242 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:05:29.242Z,1528916729.242 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 312
2018-06-13T19:05:29.243Z,1528916729.243 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:05:29.243Z,1528916729.243 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 312
2018-06-13T19:05:29.243Z,1528916729.243 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:05:29.243Z,1528916729.243 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 312
2018-06-13T19:05:29.577Z,1528916729.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:05:29.578Z,1528916729.578 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:05:29.578Z,1528916729.578 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:05:29.578Z,1528916729.578 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:05:29.579Z,1528916729.579 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:05:29.579Z,1528916729.579 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:05:29.579Z,1528916729.579 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:05:29.580Z,1528916729.580 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:05:29.580Z,1528916729.580 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:05:29.980Z,1528916729.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:05:29.993Z,1528916729.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:30.396Z,1528916730.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:05:30.417Z,1528916730.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:30.819Z,1528916730.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:05:30.820Z,1528916730.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:31.178Z,1528916731.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:05:31.179Z,1528916731.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:31.590Z,1528916731.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T19:05:31.591Z,1528916731.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:32.002Z,1528916732.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T19:05:32.003Z,1528916732.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:32.408Z,1528916732.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:05:32.413Z,1528916732.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:32.768Z,1528916732.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T19:05:32.769Z,1528916732.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:33.180Z,1528916733.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T19:05:33.206Z,1528916733.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:33.603Z,1528916733.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T19:05:33.604Z,1528916733.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:33.988Z,1528916733.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T19:05:34.014Z,1528916734.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:34.375Z,1528916734.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T19:05:34.376Z,1528916734.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:34.815Z,1528916734.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T19:05:34.816Z,1528916734.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:35.173Z,1528916735.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T19:05:35.174Z,1528916735.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:35.592Z,1528916735.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T19:05:35.593Z,1528916735.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:35.992Z,1528916735.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T19:05:35.997Z,1528916735.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:36.400Z,1528916736.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T19:05:36.421Z,1528916736.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:36.836Z,1528916736.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T19:05:36.837Z,1528916736.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:37.186Z,1528916737.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T19:05:37.187Z,1528916737.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:37.595Z,1528916737.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T19:05:37.596Z,1528916737.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:38.012Z,1528916738.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T19:05:38.032Z,1528916738.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:38.394Z,1528916738.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T19:05:38.395Z,1528916738.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:38.791Z,1528916738.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T19:05:38.792Z,1528916738.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:39.242Z,1528916739.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T19:05:39.243Z,1528916739.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:39.622Z,1528916739.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T19:05:39.623Z,1528916739.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:39.979Z,1528916739.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T19:05:39.980Z,1528916739.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:40.390Z,1528916740.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T19:05:40.391Z,1528916740.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:40.788Z,1528916740.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T19:05:40.793Z,1528916740.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:41.191Z,1528916741.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T19:05:41.192Z,1528916741.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:41.609Z,1528916741.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T19:05:41.610Z,1528916741.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:41.998Z,1528916741.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T19:05:41.998Z,1528916741.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:42.390Z,1528916742.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:05:42.391Z,1528916742.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:42.790Z,1528916742.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:05:42.791Z,1528916742.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:43.190Z,1528916743.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T19:05:43.191Z,1528916743.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:43.581Z,1528916743.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:05:43.582Z,1528916743.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:44.001Z,1528916744.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:05:44.002Z,1528916744.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:44.390Z,1528916744.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:05:44.391Z,1528916744.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:44.800Z,1528916744.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:05:44.805Z,1528916744.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:45.215Z,1528916745.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:05:45.216Z,1528916745.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:45.595Z,1528916745.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T19:05:45.596Z,1528916745.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:45.975Z,1528916745.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T19:05:45.976Z,1528916745.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:46.422Z,1528916746.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:05:46.423Z,1528916746.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:46.767Z,1528916746.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T19:05:46.768Z,1528916746.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:47.172Z,1528916747.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T19:05:47.177Z,1528916747.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:47.640Z,1528916747.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T19:05:47.641Z,1528916747.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:47.992Z,1528916747.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T19:05:48.001Z,1528916748.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:48.402Z,1528916748.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T19:05:48.403Z,1528916748.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:48.808Z,1528916748.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:49.163Z,1528916749.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:49.574Z,1528916749.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:49.980Z,1528916749.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:50.382Z,1528916750.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:50.787Z,1528916750.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:51.184Z,1528916751.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:51.569Z,1528916751.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:51.991Z,1528916751.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:52.382Z,1528916752.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:52.787Z,1528916752.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:53.187Z,1528916753.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:53.603Z,1528916753.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:53.989Z,1528916753.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:54.397Z,1528916754.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:54.800Z,1528916754.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:55.188Z,1528916755.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:55.596Z,1528916755.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:56.008Z,1528916756.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:56.392Z,1528916756.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:56.801Z,1528916756.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:57.204Z,1528916757.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:57.594Z,1528916757.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:57.968Z,1528916757.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:58.371Z,1528916758.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:58.786Z,1528916758.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:59.174Z,1528916759.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:59.589Z,1528916759.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:05:59.983Z,1528916759.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:00.396Z,1528916760.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:00.825Z,1528916760.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:01.197Z,1528916761.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:01.601Z,1528916761.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:02.010Z,1528916762.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:02.393Z,1528916762.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:02.816Z,1528916762.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:03.219Z,1528916763.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:03.607Z,1528916763.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:03.976Z,1528916763.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:04.427Z,1528916764.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:04.776Z,1528916764.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:05.180Z,1528916765.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:05.639Z,1528916765.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:05.978Z,1528916765.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:06.394Z,1528916766.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:06.799Z,1528916766.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:07.182Z,1528916767.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:07.595Z,1528916767.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:08.008Z,1528916768.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:08.393Z,1528916768.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:08.802Z,1528916768.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:09.214Z,1528916769.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:09.583Z,1528916769.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:10.016Z,1528916770.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:10.428Z,1528916770.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:10.788Z,1528916770.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:11.170Z,1528916771.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:11.627Z,1528916771.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:11.977Z,1528916771.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:12.387Z,1528916772.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:12.797Z,1528916772.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:13.197Z,1528916773.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:13.618Z,1528916773.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:14.002Z,1528916774.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:14.403Z,1528916774.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:14.763Z,1528916774.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:15.165Z,1528916775.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:15.585Z,1528916775.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:15.983Z,1528916775.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:16.396Z,1528916776.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:16.779Z,1528916776.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:17.193Z,1528916777.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:17.640Z,1528916777.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:18.001Z,1528916778.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:18.413Z,1528916778.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:18.823Z,1528916778.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:19.202Z,1528916779.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:19.592Z,1528916779.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:20.011Z,1528916780.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:20.413Z,1528916780.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:20.795Z,1528916780.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:21.226Z,1528916781.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:21.596Z,1528916781.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:22.018Z,1528916782.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:22.428Z,1528916782.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:28.631Z,1528916788.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:28.806Z,1528916788.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:29.207Z,1528916789.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:29.597Z,1528916789.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:30.033Z,1528916790.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:30.415Z,1528916790.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:30.812Z,1528916790.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:31.225Z,1528916791.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:31.617Z,1528916791.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:32.022Z,1528916792.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:32.427Z,1528916792.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:32.788Z,1528916792.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:33.217Z,1528916793.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:33.609Z,1528916793.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:34.030Z,1528916794.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:34.419Z,1528916794.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:34.820Z,1528916794.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:35.217Z,1528916795.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:35.626Z,1528916795.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:36.020Z,1528916796.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:36.396Z,1528916796.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:36.821Z,1528916796.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:37.223Z,1528916797.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:37.594Z,1528916797.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:38.039Z,1528916798.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:38.425Z,1528916798.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:38.804Z,1528916798.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:39.196Z,1528916799.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:39.612Z,1528916799.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:40.012Z,1528916800.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:40.406Z,1528916800.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:40.804Z,1528916800.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:41.214Z,1528916801.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:41.636Z,1528916801.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:42.018Z,1528916802.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:42.417Z,1528916802.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:42.801Z,1528916802.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:43.215Z,1528916803.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:43.651Z,1528916803.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:44.038Z,1528916804.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:44.411Z,1528916804.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:44.802Z,1528916804.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:45.193Z,1528916805.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:45.616Z,1528916805.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:46.083Z,1528916806.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:46.433Z,1528916806.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:46.795Z,1528916806.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:47.226Z,1528916807.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:47.631Z,1528916807.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:48.009Z,1528916808.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:48.464Z,1528916808.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:48.793Z,1528916808.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:49.213Z,1528916809.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:49.613Z,1528916809.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:50.027Z,1528916810.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:50.416Z,1528916810.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:50.822Z,1528916810.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:51.214Z,1528916811.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:51.587Z,1528916811.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:52.049Z,1528916812.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:52.396Z,1528916812.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:52.830Z,1528916812.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:53.193Z,1528916813.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:53.603Z,1528916813.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:54.016Z,1528916814.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:54.400Z,1528916814.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:54.810Z,1528916814.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:55.216Z,1528916815.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:55.658Z,1528916815.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:56.002Z,1528916816.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:56.412Z,1528916816.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:56.825Z,1528916816.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:57.212Z,1528916817.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:57.621Z,1528916817.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:58.037Z,1528916818.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:58.422Z,1528916818.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:58.816Z,1528916818.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:59.196Z,1528916819.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:06:59.599Z,1528916819.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:00.005Z,1528916820.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:00.392Z,1528916820.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:00.816Z,1528916820.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:01.241Z,1528916821.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:01.613Z,1528916821.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:02.004Z,1528916822.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:02.400Z,1528916822.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:02.796Z,1528916822.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:03.196Z,1528916823.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:03.613Z,1528916823.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:04.027Z,1528916824.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:04.391Z,1528916824.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:04.820Z,1528916824.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:05.196Z,1528916825.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:05.600Z,1528916825.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:05.998Z,1528916825.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:06.400Z,1528916826.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:06.818Z,1528916826.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:07.217Z,1528916827.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:07.617Z,1528916827.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:08.011Z,1528916828.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:08.403Z,1528916828.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:08.820Z,1528916828.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:09.183Z,1528916829.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:09.622Z,1528916829.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:10.032Z,1528916830.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:10.421Z,1528916830.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:10.834Z,1528916830.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:11.192Z,1528916831.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:11.606Z,1528916831.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:12.010Z,1528916832.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:12.411Z,1528916832.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:12.799Z,1528916832.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:13.217Z,1528916833.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:13.612Z,1528916833.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:14.007Z,1528916834.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:14.419Z,1528916834.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:14.795Z,1528916834.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:15.200Z,1528916835.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:15.600Z,1528916835.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:16.015Z,1528916836.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:16.408Z,1528916836.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:16.816Z,1528916836.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:17.207Z,1528916837.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:17.620Z,1528916837.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:18.016Z,1528916838.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:18.415Z,1528916838.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:18.827Z,1528916838.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:19.224Z,1528916839.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:19.232Z,1528916839.232 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T19:07:19.232Z,1528916839.232 [Default:CheckIn:C.Wait] Stopped
2018-06-13T19:07:19.232Z,1528916839.232 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T19:07:19.232Z,1528916839.232 [Default:CheckIn:D] Running Loop=1
2018-06-13T19:07:19.616Z,1528916839.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:19.624Z,1528916839.624 [Default:CheckIn:D] Stopped
2018-06-13T19:07:19.624Z,1528916839.624 [Default:CheckIn:E] Running Loop=1
2018-06-13T19:07:19.982Z,1528916839.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:19.986Z,1528916839.986 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 940.102995 min 
2018-06-13T19:07:19.987Z,1528916839.987 [Default:CheckIn:E] Stopped
2018-06-13T19:07:19.987Z,1528916839.987 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T19:07:19.987Z,1528916839.987 [Default:CheckIn] Stopped
2018-06-13T19:07:19.987Z,1528916839.987 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T19:07:19.987Z,1528916839.987 [Default:CheckIn](INFO): Running loop #91
2018-06-13T19:07:19.987Z,1528916839.987 [Default:CheckIn] Running Loop=91
2018-06-13T19:07:19.987Z,1528916839.987 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T19:07:19.987Z,1528916839.987 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T19:07:20.388Z,1528916840.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:20.788Z,1528916840.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:21.243Z,1528916841.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:27.877Z,1528916847.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:28.052Z,1528916848.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:28.484Z,1528916848.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:28.854Z,1528916848.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:29.248Z,1528916849.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:29.656Z,1528916849.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:30.043Z,1528916850.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:30.456Z,1528916850.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:30.864Z,1528916850.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:31.250Z,1528916851.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:31.647Z,1528916851.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:32.061Z,1528916852.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:32.449Z,1528916852.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:32.837Z,1528916852.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:33.254Z,1528916853.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:33.636Z,1528916853.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:34.093Z,1528916854.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:34.470Z,1528916854.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:34.865Z,1528916854.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:35.234Z,1528916855.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:35.663Z,1528916855.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:36.071Z,1528916856.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:36.452Z,1528916856.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:36.862Z,1528916856.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:37.259Z,1528916857.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:37.654Z,1528916857.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:38.027Z,1528916858.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:38.429Z,1528916858.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:38.866Z,1528916858.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:39.225Z,1528916859.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:39.656Z,1528916859.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:40.027Z,1528916860.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:40.431Z,1528916860.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:40.827Z,1528916860.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:41.228Z,1528916861.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:41.636Z,1528916861.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:42.065Z,1528916862.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:42.463Z,1528916862.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:42.840Z,1528916862.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:43.279Z,1528916863.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:43.656Z,1528916863.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:44.034Z,1528916864.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:44.465Z,1528916864.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:44.844Z,1528916864.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:45.274Z,1528916865.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:45.636Z,1528916865.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:46.077Z,1528916866.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:46.461Z,1528916866.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:46.912Z,1528916866.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:47.264Z,1528916867.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:47.632Z,1528916867.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:48.036Z,1528916868.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:48.433Z,1528916868.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:48.860Z,1528916868.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:49.282Z,1528916869.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:49.640Z,1528916869.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:50.036Z,1528916870.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:50.434Z,1528916870.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:50.847Z,1528916870.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:51.235Z,1528916871.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:51.612Z,1528916871.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:52.056Z,1528916872.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:52.455Z,1528916872.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:52.863Z,1528916872.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:53.243Z,1528916873.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:53.626Z,1528916873.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:54.061Z,1528916874.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:54.450Z,1528916874.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:54.872Z,1528916874.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:55.271Z,1528916875.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:55.653Z,1528916875.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:56.040Z,1528916876.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:56.427Z,1528916876.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:56.827Z,1528916876.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:57.246Z,1528916877.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:57.672Z,1528916877.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:58.040Z,1528916878.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:58.446Z,1528916878.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:58.904Z,1528916878.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:59.243Z,1528916879.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:07:59.660Z,1528916879.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:00.095Z,1528916880.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:00.464Z,1528916880.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:00.850Z,1528916880.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:01.271Z,1528916881.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:01.670Z,1528916881.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:02.055Z,1528916882.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:02.463Z,1528916882.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:02.890Z,1528916882.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:03.238Z,1528916883.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:03.639Z,1528916883.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:04.078Z,1528916884.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:04.452Z,1528916884.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:04.859Z,1528916884.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:05.238Z,1528916885.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:05.661Z,1528916885.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:06.031Z,1528916886.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:06.466Z,1528916886.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:06.845Z,1528916886.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:07.275Z,1528916887.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:07.653Z,1528916887.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:08.047Z,1528916888.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:08.443Z,1528916888.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:08.851Z,1528916888.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:09.280Z,1528916889.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:09.654Z,1528916889.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:10.056Z,1528916890.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:10.458Z,1528916890.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:10.892Z,1528916890.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:11.227Z,1528916891.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:11.658Z,1528916891.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:12.088Z,1528916892.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:12.465Z,1528916892.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:12.855Z,1528916892.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:13.268Z,1528916893.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:13.678Z,1528916893.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:14.047Z,1528916894.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:14.472Z,1528916894.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:14.849Z,1528916894.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:15.238Z,1528916895.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:15.662Z,1528916895.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:16.083Z,1528916896.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:16.461Z,1528916896.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:16.861Z,1528916896.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:17.257Z,1528916897.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:17.655Z,1528916897.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:18.067Z,1528916898.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:18.447Z,1528916898.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:18.846Z,1528916898.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:19.271Z,1528916899.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:19.663Z,1528916899.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:20.031Z,1528916900.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:20.463Z,1528916900.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:20.872Z,1528916900.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:21.264Z,1528916901.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:27.092Z,1528916907.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:27.292Z,1528916907.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:27.693Z,1528916907.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:28.110Z,1528916908.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:28.463Z,1528916908.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:28.892Z,1528916908.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:29.266Z,1528916909.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:29.699Z,1528916909.699 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:29.699Z,1528916909.699 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 313
2018-06-13T19:08:29.699Z,1528916909.699 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:08:29.709Z,1528916909.709 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:29.710Z,1528916909.710 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 313
2018-06-13T19:08:29.710Z,1528916909.710 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:08:29.711Z,1528916909.711 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:29.711Z,1528916909.711 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 313
2018-06-13T19:08:29.712Z,1528916909.712 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:08:29.805Z,1528916909.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:08:29.805Z,1528916909.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:08:29.806Z,1528916909.806 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:08:30.185Z,1528916910.185 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:08:30.185Z,1528916910.185 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 313
2018-06-13T19:08:30.186Z,1528916910.186 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:08:30.186Z,1528916910.186 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 313
2018-06-13T19:08:30.186Z,1528916910.186 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:08:30.186Z,1528916910.186 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 313
2018-06-13T19:08:30.524Z,1528916910.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:08:30.524Z,1528916910.524 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:08:30.524Z,1528916910.524 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:08:30.525Z,1528916910.525 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:08:30.525Z,1528916910.525 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:08:30.526Z,1528916910.526 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:08:30.526Z,1528916910.526 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:08:30.526Z,1528916910.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:08:30.527Z,1528916910.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:08:30.891Z,1528916910.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:08:30.892Z,1528916910.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:31.288Z,1528916911.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:08:31.297Z,1528916911.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:31.688Z,1528916911.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:08:31.689Z,1528916911.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:32.084Z,1528916912.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:08:32.089Z,1528916912.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:32.486Z,1528916912.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T19:08:32.486Z,1528916912.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:32.914Z,1528916912.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T19:08:32.915Z,1528916912.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:33.293Z,1528916913.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:08:33.294Z,1528916913.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:33.668Z,1528916913.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T19:08:33.702Z,1528916913.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:34.059Z,1528916914.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T19:08:34.060Z,1528916914.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:34.472Z,1528916914.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T19:08:34.481Z,1528916914.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:34.870Z,1528916914.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T19:08:34.871Z,1528916914.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:35.284Z,1528916915.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T19:08:35.317Z,1528916915.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:35.673Z,1528916915.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T19:08:35.674Z,1528916915.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:36.072Z,1528916916.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T19:08:36.077Z,1528916916.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:36.476Z,1528916916.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T19:08:36.477Z,1528916916.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:36.913Z,1528916916.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T19:08:36.914Z,1528916916.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:37.275Z,1528916917.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T19:08:37.276Z,1528916917.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:37.686Z,1528916917.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T19:08:37.686Z,1528916917.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:38.054Z,1528916918.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T19:08:38.054Z,1528916918.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:38.488Z,1528916918.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T19:08:38.497Z,1528916918.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:38.863Z,1528916918.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T19:08:38.864Z,1528916918.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:39.299Z,1528916919.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T19:08:39.300Z,1528916919.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:39.672Z,1528916919.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T19:08:39.677Z,1528916919.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:40.085Z,1528916920.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T19:08:40.086Z,1528916920.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:40.483Z,1528916920.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T19:08:40.484Z,1528916920.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:40.871Z,1528916920.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T19:08:40.872Z,1528916920.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:41.279Z,1528916921.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T19:08:41.280Z,1528916921.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:41.695Z,1528916921.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T19:08:41.696Z,1528916921.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:42.070Z,1528916922.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T19:08:42.071Z,1528916922.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:42.491Z,1528916922.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T19:08:42.493Z,1528916922.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:42.886Z,1528916922.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T19:08:42.887Z,1528916922.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:43.293Z,1528916923.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:08:43.294Z,1528916923.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:43.686Z,1528916923.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:08:43.687Z,1528916923.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:44.122Z,1528916924.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T19:08:44.123Z,1528916924.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:44.470Z,1528916924.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:08:44.471Z,1528916924.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:44.931Z,1528916924.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:08:44.931Z,1528916924.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:45.294Z,1528916925.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:08:45.295Z,1528916925.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:45.699Z,1528916925.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:08:45.700Z,1528916925.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:46.100Z,1528916926.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:08:46.101Z,1528916926.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:46.495Z,1528916926.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T19:08:46.496Z,1528916926.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:46.861Z,1528916926.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T19:08:46.862Z,1528916926.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:47.292Z,1528916927.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:08:47.294Z,1528916927.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:47.667Z,1528916927.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T19:08:47.668Z,1528916927.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:48.081Z,1528916928.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T19:08:48.082Z,1528916928.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:48.468Z,1528916928.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T19:08:48.469Z,1528916928.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:48.888Z,1528916928.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T19:08:48.898Z,1528916928.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:49.272Z,1528916929.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T19:08:49.277Z,1528916929.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:49.681Z,1528916929.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T19:08:49.682Z,1528916929.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:50.075Z,1528916930.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:50.468Z,1528916930.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:50.917Z,1528916930.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:51.300Z,1528916931.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:51.702Z,1528916931.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:52.086Z,1528916932.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:52.494Z,1528916932.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:52.899Z,1528916932.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:53.305Z,1528916933.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:53.666Z,1528916933.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:54.082Z,1528916934.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:54.508Z,1528916934.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:54.881Z,1528916934.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:55.321Z,1528916935.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:55.683Z,1528916935.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:56.071Z,1528916936.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:56.483Z,1528916936.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:56.930Z,1528916936.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:57.272Z,1528916937.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:57.673Z,1528916937.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:58.109Z,1528916938.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:58.478Z,1528916938.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:58.876Z,1528916938.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:59.256Z,1528916939.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:08:59.686Z,1528916939.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:00.091Z,1528916940.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:00.532Z,1528916940.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:00.916Z,1528916940.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:01.295Z,1528916941.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:01.715Z,1528916941.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:02.051Z,1528916942.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:02.471Z,1528916942.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:02.916Z,1528916942.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:03.280Z,1528916943.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:03.680Z,1528916943.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:04.106Z,1528916944.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:04.468Z,1528916944.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:04.880Z,1528916944.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:05.286Z,1528916945.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:05.675Z,1528916945.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:06.092Z,1528916946.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:06.503Z,1528916946.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:06.900Z,1528916946.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:07.285Z,1528916947.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:07.708Z,1528916947.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:08.138Z,1528916948.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:08.492Z,1528916948.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:08.919Z,1528916948.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:09.271Z,1528916949.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:09.705Z,1528916949.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:10.102Z,1528916950.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:10.473Z,1528916950.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:10.882Z,1528916950.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:11.313Z,1528916951.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:11.686Z,1528916951.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:12.072Z,1528916952.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:12.524Z,1528916952.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:12.874Z,1528916952.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:13.300Z,1528916953.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:13.727Z,1528916953.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:14.064Z,1528916954.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:14.456Z,1528916954.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:14.865Z,1528916954.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:15.346Z,1528916955.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:15.713Z,1528916955.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:16.111Z,1528916956.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:16.500Z,1528916956.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:16.866Z,1528916956.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:17.293Z,1528916957.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:17.647Z,1528916957.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:18.094Z,1528916958.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:18.499Z,1528916958.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:18.903Z,1528916958.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:19.283Z,1528916959.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:19.714Z,1528916959.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:20.066Z,1528916960.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:20.499Z,1528916960.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:20.908Z,1528916960.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:21.275Z,1528916961.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:27.565Z,1528916967.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:27.754Z,1528916967.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:28.140Z,1528916968.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:28.581Z,1528916968.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:29.027Z,1528916969.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:29.358Z,1528916969.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:29.799Z,1528916969.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:30.159Z,1528916970.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:30.548Z,1528916970.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:30.957Z,1528916970.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:31.361Z,1528916971.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:31.739Z,1528916971.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:32.160Z,1528916972.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:32.566Z,1528916972.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:32.966Z,1528916972.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:33.366Z,1528916973.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:33.730Z,1528916973.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:34.151Z,1528916974.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:34.546Z,1528916974.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:34.950Z,1528916974.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:35.385Z,1528916975.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:35.757Z,1528916975.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:36.138Z,1528916976.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:36.592Z,1528916976.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:36.940Z,1528916976.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:37.317Z,1528916977.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:37.711Z,1528916977.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:38.155Z,1528916978.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:38.548Z,1528916978.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:38.954Z,1528916978.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:39.351Z,1528916979.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:39.739Z,1528916979.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:40.144Z,1528916980.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:40.569Z,1528916980.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:40.954Z,1528916980.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:41.370Z,1528916981.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:41.764Z,1528916981.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:42.127Z,1528916982.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:42.541Z,1528916982.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:42.935Z,1528916982.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:43.310Z,1528916983.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:43.710Z,1528916983.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:44.159Z,1528916984.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:44.556Z,1528916984.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:44.953Z,1528916984.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:45.354Z,1528916985.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:45.738Z,1528916985.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:46.123Z,1528916986.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:46.553Z,1528916986.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:46.953Z,1528916986.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:47.345Z,1528916987.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:47.782Z,1528916987.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:48.148Z,1528916988.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:48.543Z,1528916988.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:48.979Z,1528916988.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:49.320Z,1528916989.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:49.764Z,1528916989.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:50.168Z,1528916990.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:50.540Z,1528916990.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:50.926Z,1528916990.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:51.334Z,1528916991.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:51.752Z,1528916991.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:52.132Z,1528916992.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:52.541Z,1528916992.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:52.955Z,1528916992.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:53.356Z,1528916993.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:53.748Z,1528916993.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:54.118Z,1528916994.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:54.567Z,1528916994.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:54.958Z,1528916994.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:55.334Z,1528916995.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:55.744Z,1528916995.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:56.137Z,1528916996.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:56.557Z,1528916996.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:56.944Z,1528916996.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:57.350Z,1528916997.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:57.715Z,1528916997.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:58.126Z,1528916998.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:58.520Z,1528916998.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:58.923Z,1528916998.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:59.374Z,1528916999.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:09:59.754Z,1528916999.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:00.110Z,1528917000.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:00.516Z,1528917000.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:00.944Z,1528917000.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:01.352Z,1528917001.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:01.724Z,1528917001.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:02.157Z,1528917002.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:02.533Z,1528917002.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:02.936Z,1528917002.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:03.370Z,1528917003.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:03.726Z,1528917003.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:04.131Z,1528917004.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:04.540Z,1528917004.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:04.939Z,1528917004.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:05.320Z,1528917005.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:05.722Z,1528917005.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:06.177Z,1528917006.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:06.566Z,1528917006.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:06.960Z,1528917006.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:07.327Z,1528917007.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:07.769Z,1528917007.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:08.110Z,1528917008.110 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T19:10:08.110Z,1528917008.110 [BPC1] Communications Fault, FailCount= 2
2018-06-13T19:10:08.110Z,1528917008.110 [BPC1](ERROR): Communications Fault
2018-06-13T19:10:08.161Z,1528917008.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:08.257Z,1528917008.257 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T19:10:08.533Z,1528917008.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:08.940Z,1528917008.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:09.381Z,1528917009.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:09.473Z,1528917009.473 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T19:10:09.473Z,1528917009.473 [BPC1] No Fault, FailCount= 2
2018-06-13T19:10:09.836Z,1528917009.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:10.144Z,1528917010.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:10.552Z,1528917010.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:10.928Z,1528917010.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:11.324Z,1528917011.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:11.728Z,1528917011.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:12.132Z,1528917012.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:12.526Z,1528917012.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:12.946Z,1528917012.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:13.340Z,1528917013.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:13.751Z,1528917013.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:14.143Z,1528917014.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:14.541Z,1528917014.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:14.957Z,1528917014.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:15.349Z,1528917015.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:15.733Z,1528917015.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:16.134Z,1528917016.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:16.528Z,1528917016.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:16.945Z,1528917016.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:17.378Z,1528917017.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:17.747Z,1528917017.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:18.116Z,1528917018.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:18.532Z,1528917018.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:18.969Z,1528917018.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:19.348Z,1528917019.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:19.739Z,1528917019.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:20.131Z,1528917020.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:20.534Z,1528917020.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:20.943Z,1528917020.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:21.344Z,1528917021.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:27.010Z,1528917027.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:27.239Z,1528917027.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:27.602Z,1528917027.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:28.037Z,1528917028.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:28.416Z,1528917028.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:28.804Z,1528917028.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:29.207Z,1528917029.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:29.646Z,1528917029.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:30.012Z,1528917030.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:30.420Z,1528917030.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:30.787Z,1528917030.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:31.209Z,1528917031.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:31.615Z,1528917031.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:32.016Z,1528917032.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:32.426Z,1528917032.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:32.832Z,1528917032.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:33.195Z,1528917033.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:33.633Z,1528917033.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:34.012Z,1528917034.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:34.421Z,1528917034.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:34.812Z,1528917034.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:35.184Z,1528917035.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:35.658Z,1528917035.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:36.017Z,1528917036.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:36.424Z,1528917036.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:36.818Z,1528917036.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:37.200Z,1528917037.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:37.622Z,1528917037.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:37.995Z,1528917037.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:38.412Z,1528917038.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:38.812Z,1528917038.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:39.202Z,1528917039.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:39.600Z,1528917039.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:40.020Z,1528917040.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:40.412Z,1528917040.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:40.820Z,1528917040.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:41.181Z,1528917041.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:41.613Z,1528917041.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:42.019Z,1528917042.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:42.431Z,1528917042.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:42.841Z,1528917042.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:43.224Z,1528917043.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:43.613Z,1528917043.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:44.006Z,1528917044.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:44.411Z,1528917044.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:44.792Z,1528917044.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:45.212Z,1528917045.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:45.635Z,1528917045.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:45.998Z,1528917045.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:46.402Z,1528917046.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:46.809Z,1528917046.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:47.196Z,1528917047.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:47.608Z,1528917047.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:48.012Z,1528917048.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:48.417Z,1528917048.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:48.812Z,1528917048.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:49.184Z,1528917049.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:49.590Z,1528917049.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:50.013Z,1528917050.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:50.447Z,1528917050.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:50.814Z,1528917050.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:51.196Z,1528917051.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:51.615Z,1528917051.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:52.020Z,1528917052.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:52.421Z,1528917052.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:52.822Z,1528917052.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:53.208Z,1528917053.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:53.606Z,1528917053.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:54.011Z,1528917054.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:54.407Z,1528917054.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:54.813Z,1528917054.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:55.255Z,1528917055.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:55.596Z,1528917055.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:56.004Z,1528917056.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:56.408Z,1528917056.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:56.832Z,1528917056.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:57.204Z,1528917057.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:57.611Z,1528917057.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:58.006Z,1528917058.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:58.416Z,1528917058.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:58.816Z,1528917058.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:59.218Z,1528917059.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:10:59.610Z,1528917059.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:00.032Z,1528917060.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:00.420Z,1528917060.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:00.837Z,1528917060.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:01.193Z,1528917061.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:01.599Z,1528917061.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:02.011Z,1528917062.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:02.407Z,1528917062.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:02.821Z,1528917062.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:03.219Z,1528917063.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:03.588Z,1528917063.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:04.025Z,1528917064.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:04.424Z,1528917064.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:04.830Z,1528917064.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:05.220Z,1528917065.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:05.624Z,1528917065.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:06.012Z,1528917066.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:06.407Z,1528917066.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:06.815Z,1528917066.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:07.228Z,1528917067.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:07.613Z,1528917067.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:08.032Z,1528917068.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:08.412Z,1528917068.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:08.810Z,1528917068.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:09.216Z,1528917069.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:09.618Z,1528917069.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:10.016Z,1528917070.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:10.476Z,1528917070.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:10.834Z,1528917070.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:11.190Z,1528917071.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:11.620Z,1528917071.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:12.000Z,1528917072.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:12.436Z,1528917072.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:12.820Z,1528917072.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:13.248Z,1528917073.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:13.596Z,1528917073.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:14.008Z,1528917074.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:14.435Z,1528917074.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:14.842Z,1528917074.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:15.202Z,1528917075.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:15.618Z,1528917075.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:16.057Z,1528917076.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:16.428Z,1528917076.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:16.828Z,1528917076.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:17.213Z,1528917077.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:17.616Z,1528917077.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:18.002Z,1528917078.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:18.433Z,1528917078.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:18.797Z,1528917078.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:19.206Z,1528917079.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:19.611Z,1528917079.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:20.006Z,1528917080.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:20.440Z,1528917080.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:20.792Z,1528917080.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:21.240Z,1528917081.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:21.644Z,1528917081.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:27.418Z,1528917087.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:27.641Z,1528917087.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:28.010Z,1528917088.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:28.380Z,1528917088.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:28.788Z,1528917088.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:29.202Z,1528917089.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:29.595Z,1528917089.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:29.986Z,1528917089.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:30.418Z,1528917090.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:30.803Z,1528917090.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:30.803Z,1528917090.803 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 314
2018-06-13T19:11:30.803Z,1528917090.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:11:30.809Z,1528917090.809 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:30.809Z,1528917090.809 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 314
2018-06-13T19:11:30.810Z,1528917090.810 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:11:30.811Z,1528917090.811 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:30.811Z,1528917090.811 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 314
2018-06-13T19:11:30.811Z,1528917090.811 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:11:30.913Z,1528917090.913 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:11:30.914Z,1528917090.914 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:11:30.914Z,1528917090.914 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:11:31.353Z,1528917091.353 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:11:31.354Z,1528917091.354 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 314
2018-06-13T19:11:31.354Z,1528917091.354 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:11:31.354Z,1528917091.354 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 314
2018-06-13T19:11:31.355Z,1528917091.355 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:11:31.355Z,1528917091.355 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 314
2018-06-13T19:11:31.615Z,1528917091.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:11:31.616Z,1528917091.616 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:11:31.616Z,1528917091.616 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:11:31.616Z,1528917091.616 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:11:31.621Z,1528917091.621 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:11:31.621Z,1528917091.621 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:11:31.622Z,1528917091.622 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:11:31.622Z,1528917091.622 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:11:31.622Z,1528917091.622 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:11:31.988Z,1528917091.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:11:31.993Z,1528917091.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:32.401Z,1528917092.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:11:32.402Z,1528917092.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:32.808Z,1528917092.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:11:32.829Z,1528917092.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:33.195Z,1528917093.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:11:33.195Z,1528917093.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:33.573Z,1528917093.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T19:11:33.574Z,1528917093.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:33.996Z,1528917093.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T19:11:33.999Z,1528917093.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:34.418Z,1528917094.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:11:34.428Z,1528917094.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:34.850Z,1528917094.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T19:11:34.850Z,1528917094.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:35.218Z,1528917095.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T19:11:35.218Z,1528917095.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:35.606Z,1528917095.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T19:11:35.607Z,1528917095.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:36.004Z,1528917096.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T19:11:36.029Z,1528917096.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:36.392Z,1528917096.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T19:11:36.398Z,1528917096.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:36.797Z,1528917096.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T19:11:36.798Z,1528917096.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:37.196Z,1528917097.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T19:11:37.205Z,1528917097.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:37.592Z,1528917097.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T19:11:37.598Z,1528917097.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:37.979Z,1528917097.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T19:11:37.980Z,1528917097.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:38.407Z,1528917098.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T19:11:38.408Z,1528917098.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:38.814Z,1528917098.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T19:11:38.815Z,1528917098.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:39.210Z,1528917099.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T19:11:39.211Z,1528917099.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:39.634Z,1528917099.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T19:11:39.635Z,1528917099.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:40.038Z,1528917100.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T19:11:40.039Z,1528917100.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:40.400Z,1528917100.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T19:11:40.405Z,1528917100.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:40.796Z,1528917100.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T19:11:40.801Z,1528917100.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:41.207Z,1528917101.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T19:11:41.208Z,1528917101.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:41.644Z,1528917101.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T19:11:41.649Z,1528917101.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:42.008Z,1528917102.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T19:11:42.014Z,1528917102.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:42.415Z,1528917102.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T19:11:42.416Z,1528917102.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:42.814Z,1528917102.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T19:11:42.815Z,1528917102.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:43.219Z,1528917103.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T19:11:43.220Z,1528917103.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:43.580Z,1528917103.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T19:11:43.601Z,1528917103.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:43.987Z,1528917103.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T19:11:43.988Z,1528917103.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:44.418Z,1528917104.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:11:44.420Z,1528917104.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:44.796Z,1528917104.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:11:44.797Z,1528917104.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:45.194Z,1528917105.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T19:11:45.196Z,1528917105.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:45.589Z,1528917105.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:11:45.590Z,1528917105.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:46.012Z,1528917106.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:11:46.037Z,1528917106.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:46.391Z,1528917106.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:11:46.392Z,1528917106.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:46.799Z,1528917106.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:11:46.800Z,1528917106.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:47.213Z,1528917107.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:11:47.214Z,1528917107.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:47.632Z,1528917107.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T19:11:47.653Z,1528917107.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:48.013Z,1528917108.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T19:11:48.014Z,1528917108.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:48.415Z,1528917108.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:11:48.416Z,1528917108.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:48.793Z,1528917108.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T19:11:48.794Z,1528917108.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:49.178Z,1528917109.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T19:11:49.179Z,1528917109.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:49.626Z,1528917109.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T19:11:49.627Z,1528917109.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:50.007Z,1528917110.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T19:11:50.008Z,1528917110.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:50.392Z,1528917110.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T19:11:50.397Z,1528917110.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:50.812Z,1528917110.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:51.208Z,1528917111.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:51.591Z,1528917111.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:52.018Z,1528917112.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:52.423Z,1528917112.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:52.822Z,1528917112.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:53.234Z,1528917113.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:53.590Z,1528917113.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:54.019Z,1528917114.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:54.401Z,1528917114.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:54.794Z,1528917114.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:55.189Z,1528917115.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:55.611Z,1528917115.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:55.986Z,1528917115.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:56.423Z,1528917116.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:56.734Z,1528917116.734 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T19:11:56.734Z,1528917116.734 [NAL9602] Data Fault, FailCount= 1
2018-06-13T19:11:56.734Z,1528917116.734 [NAL9602](ERROR): Data Fault
2018-06-13T19:11:56.836Z,1528917116.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:56.945Z,1528917116.945 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T19:11:57.134Z,1528917117.134 [NAL9602](INFO): Powering down
2018-06-13T19:11:57.195Z,1528917117.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:57.588Z,1528917117.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:57.992Z,1528917117.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:58.097Z,1528917118.097 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T19:11:58.097Z,1528917118.097 [NAL9602] No Fault, FailCount= 1
2018-06-13T19:11:58.399Z,1528917118.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:58.786Z,1528917118.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:59.241Z,1528917119.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:11:59.613Z,1528917119.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:00.006Z,1528917120.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:00.393Z,1528917120.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:00.798Z,1528917120.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:01.195Z,1528917121.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:01.608Z,1528917121.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:02.038Z,1528917122.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:02.451Z,1528917122.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:02.804Z,1528917122.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:03.216Z,1528917123.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:03.596Z,1528917123.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:03.998Z,1528917123.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.402457 seconds old.
2018-06-13T19:12:03.999Z,1528917123.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:04.000Z,1528917124.000 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.394566 seconds old.
2018-06-13T19:12:04.009Z,1528917124.009 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.403242 seconds old.
2018-06-13T19:12:04.379Z,1528917124.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.783668 seconds old.
2018-06-13T19:12:04.380Z,1528917124.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:04.389Z,1528917124.389 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.783934 seconds old.
2018-06-13T19:12:04.391Z,1528917124.391 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.784329 seconds old.
2018-06-13T19:12:04.823Z,1528917124.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.227738 seconds old.
2018-06-13T19:12:04.824Z,1528917124.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:04.828Z,1528917124.828 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.222575 seconds old.
2018-06-13T19:12:04.830Z,1528917124.830 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.223833 seconds old.
2018-06-13T19:12:05.261Z,1528917125.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.665488 seconds old.
2018-06-13T19:12:05.262Z,1528917125.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:05.263Z,1528917125.263 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.657473 seconds old.
2018-06-13T19:12:05.264Z,1528917125.264 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.657772 seconds old.
2018-06-13T19:12:05.635Z,1528917125.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.039351 seconds old.
2018-06-13T19:12:05.636Z,1528917125.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:05.641Z,1528917125.641 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.035842 seconds old.
2018-06-13T19:12:05.642Z,1528917125.642 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.036278 seconds old.
2018-06-13T19:12:06.003Z,1528917126.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:06.424Z,1528917126.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:06.816Z,1528917126.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:07.200Z,1528917127.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:07.615Z,1528917127.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:08.005Z,1528917128.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:08.396Z,1528917128.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:08.843Z,1528917128.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:09.193Z,1528917129.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:09.584Z,1528917129.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:10.004Z,1528917130.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:10.396Z,1528917130.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:10.827Z,1528917130.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:11.205Z,1528917131.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:11.610Z,1528917131.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:11.996Z,1528917131.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:12.452Z,1528917132.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:12.780Z,1528917132.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:13.225Z,1528917133.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:13.627Z,1528917133.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:14.028Z,1528917134.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:14.420Z,1528917134.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:14.834Z,1528917134.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:15.211Z,1528917135.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:15.593Z,1528917135.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:16.036Z,1528917136.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:16.409Z,1528917136.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:16.799Z,1528917136.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:17.193Z,1528917137.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:17.612Z,1528917137.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:18.019Z,1528917138.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:18.420Z,1528917138.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:18.788Z,1528917138.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:19.190Z,1528917139.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:19.623Z,1528917139.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:19.997Z,1528917139.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:20.023Z,1528917140.023 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T19:07:19.0Z
2018-06-13T19:12:20.023Z,1528917140.023 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T19:12:20.023Z,1528917140.023 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T19:12:20.395Z,1528917140.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:23.081Z,1528917143.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:23.255Z,1528917143.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:29.588Z,1528917149.588 [NAL9602](INFO): Powering up NAL9602
2018-06-13T19:12:29.714Z,1528917149.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:29.835Z,1528917149.835 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0364.lzma
2018-06-13T19:12:29.908Z,1528917149.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:30.303Z,1528917150.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:30.626Z,1528917150.626 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0364.lzma.bak
2018-06-13T19:12:30.627Z,1528917150.627 [DataOverHttps](INFO): SBD MOMSN=8329776
2018-06-13T19:12:30.738Z,1528917150.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:34.770Z,1528917154.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:34.980Z,1528917154.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:35.360Z,1528917155.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:35.758Z,1528917155.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:41.261Z,1528917161.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:41.421Z,1528917161.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:41.746Z,1528917161.746 [NAL9602](INFO): NAL9602 initialized
2018-06-13T19:12:41.812Z,1528917161.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:42.199Z,1528917162.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:42.606Z,1528917162.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:43.001Z,1528917163.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:43.394Z,1528917163.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:43.792Z,1528917163.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:44.231Z,1528917164.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:50.099Z,1528917170.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:50.215Z,1528917170.215 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180613T032335/Express0365.lzma
2018-06-13T19:12:50.320Z,1528917170.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:50.705Z,1528917170.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:51.017Z,1528917171.017 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0365.lzma.bak
2018-06-13T19:12:51.017Z,1528917171.017 [DataOverHttps](INFO): SBD MOMSN=8329778
2018-06-13T19:12:51.121Z,1528917171.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:54.978Z,1528917174.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:55.005Z,1528917175.005 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T19:12:55.005Z,1528917175.005 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T19:12:55.005Z,1528917175.005 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T19:12:55.204Z,1528917175.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:12:55.608Z,1528917175.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:02.291Z,1528917182.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:02.504Z,1528917182.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:02.921Z,1528917182.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:03.320Z,1528917183.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:03.692Z,1528917183.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:04.099Z,1528917184.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:04.501Z,1528917184.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:04.911Z,1528917184.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:05.317Z,1528917185.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:05.686Z,1528917185.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:06.088Z,1528917186.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:06.499Z,1528917186.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:06.858Z,1528917186.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:07.293Z,1528917187.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:07.705Z,1528917187.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:08.117Z,1528917188.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:08.500Z,1528917188.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:08.920Z,1528917188.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:09.302Z,1528917189.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:09.686Z,1528917189.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:10.111Z,1528917190.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:10.513Z,1528917190.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:10.908Z,1528917190.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:11.304Z,1528917191.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:11.683Z,1528917191.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:12.074Z,1528917192.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:12.492Z,1528917192.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:12.896Z,1528917192.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:13.303Z,1528917193.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:13.702Z,1528917193.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:14.107Z,1528917194.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:14.499Z,1528917194.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:14.909Z,1528917194.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:15.309Z,1528917195.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:15.700Z,1528917195.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:16.120Z,1528917196.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:16.559Z,1528917196.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:16.884Z,1528917196.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:17.339Z,1528917197.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:17.707Z,1528917197.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:18.139Z,1528917198.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:18.602Z,1528917198.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:18.940Z,1528917198.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:19.292Z,1528917199.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:19.725Z,1528917199.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:20.101Z,1528917200.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:20.512Z,1528917200.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:20.916Z,1528917200.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:21.286Z,1528917201.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:21.692Z,1528917201.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:22.118Z,1528917202.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:22.518Z,1528917202.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:22.918Z,1528917202.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:23.300Z,1528917203.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:23.695Z,1528917203.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:24.080Z,1528917204.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:24.504Z,1528917204.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:24.898Z,1528917204.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:25.310Z,1528917205.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:25.707Z,1528917205.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:26.117Z,1528917206.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:26.518Z,1528917206.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:26.888Z,1528917206.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:27.303Z,1528917207.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:27.696Z,1528917207.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:28.086Z,1528917208.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:28.539Z,1528917208.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:28.907Z,1528917208.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:29.343Z,1528917209.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:29.700Z,1528917209.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:30.100Z,1528917210.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:30.468Z,1528917210.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:30.870Z,1528917210.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:31.300Z,1528917211.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:31.712Z,1528917211.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:32.109Z,1528917212.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:32.491Z,1528917212.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:32.884Z,1528917212.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:33.283Z,1528917213.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:33.690Z,1528917213.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:34.076Z,1528917214.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:34.489Z,1528917214.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:34.897Z,1528917214.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:35.328Z,1528917215.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:35.694Z,1528917215.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:36.086Z,1528917216.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:36.487Z,1528917216.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:36.892Z,1528917216.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:37.280Z,1528917217.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:37.719Z,1528917217.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:38.104Z,1528917218.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:38.487Z,1528917218.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:38.869Z,1528917218.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:39.316Z,1528917219.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:39.670Z,1528917219.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:40.072Z,1528917220.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:40.471Z,1528917220.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:40.886Z,1528917220.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:41.278Z,1528917221.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:41.691Z,1528917221.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:42.076Z,1528917222.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:42.478Z,1528917222.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:42.871Z,1528917222.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:43.279Z,1528917223.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:43.699Z,1528917223.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:44.105Z,1528917224.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:44.498Z,1528917224.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:44.876Z,1528917224.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:45.276Z,1528917225.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:45.681Z,1528917225.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:46.116Z,1528917226.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:46.482Z,1528917226.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:46.920Z,1528917226.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:47.332Z,1528917227.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:47.659Z,1528917227.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:48.062Z,1528917228.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:48.500Z,1528917228.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:48.870Z,1528917228.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:49.282Z,1528917229.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:49.714Z,1528917229.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:50.087Z,1528917230.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:50.489Z,1528917230.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:50.882Z,1528917230.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:51.276Z,1528917231.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:51.680Z,1528917231.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:52.106Z,1528917232.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:52.510Z,1528917232.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:52.908Z,1528917232.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:53.306Z,1528917233.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:53.674Z,1528917233.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:54.088Z,1528917234.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:54.480Z,1528917234.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:54.909Z,1528917234.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:55.295Z,1528917235.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:55.718Z,1528917235.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:56.096Z,1528917236.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:56.549Z,1528917236.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:13:56.863Z,1528917236.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:02.106Z,1528917242.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:02.282Z,1528917242.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:02.708Z,1528917242.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:03.085Z,1528917243.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:03.519Z,1528917243.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:03.843Z,1528917243.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:04.239Z,1528917244.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:04.644Z,1528917244.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:05.088Z,1528917245.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:05.475Z,1528917245.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:05.872Z,1528917245.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:06.284Z,1528917246.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:06.649Z,1528917246.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:07.087Z,1528917247.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:07.482Z,1528917247.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:07.877Z,1528917247.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:08.263Z,1528917248.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:08.687Z,1528917248.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:09.081Z,1528917249.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:09.483Z,1528917249.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:09.882Z,1528917249.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:10.248Z,1528917250.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:10.655Z,1528917250.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:11.063Z,1528917251.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:11.473Z,1528917251.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:11.875Z,1528917251.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:12.272Z,1528917252.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:12.674Z,1528917252.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:13.084Z,1528917253.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:13.451Z,1528917253.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:13.861Z,1528917253.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:14.272Z,1528917254.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:14.699Z,1528917254.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:15.055Z,1528917255.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:15.469Z,1528917255.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:15.879Z,1528917255.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:16.252Z,1528917256.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:16.685Z,1528917256.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:17.083Z,1528917257.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:17.487Z,1528917257.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:17.866Z,1528917257.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:18.305Z,1528917258.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:18.665Z,1528917258.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:19.069Z,1528917259.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:19.467Z,1528917259.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:19.868Z,1528917259.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:20.288Z,1528917260.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:20.698Z,1528917260.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:21.085Z,1528917261.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:21.472Z,1528917261.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:21.860Z,1528917261.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:22.260Z,1528917262.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:22.663Z,1528917262.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:23.064Z,1528917263.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:23.487Z,1528917263.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:23.892Z,1528917263.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:24.272Z,1528917264.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:24.682Z,1528917264.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:25.054Z,1528917265.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:25.463Z,1528917265.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:25.851Z,1528917265.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:26.261Z,1528917266.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:26.734Z,1528917266.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:27.054Z,1528917267.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:27.467Z,1528917267.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:27.860Z,1528917267.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:28.269Z,1528917268.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:28.677Z,1528917268.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:29.072Z,1528917269.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:29.480Z,1528917269.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:29.891Z,1528917269.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:30.377Z,1528917270.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:30.736Z,1528917270.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:31.104Z,1528917271.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:31.554Z,1528917271.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:31.933Z,1528917271.933 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:31.933Z,1528917271.933 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 315
2018-06-13T19:14:31.933Z,1528917271.933 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:14:31.935Z,1528917271.935 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:31.935Z,1528917271.935 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 315
2018-06-13T19:14:31.935Z,1528917271.935 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:14:31.945Z,1528917271.945 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:31.945Z,1528917271.945 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 315
2018-06-13T19:14:31.945Z,1528917271.945 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:14:32.057Z,1528917272.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:14:32.057Z,1528917272.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:14:32.058Z,1528917272.058 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:14:32.405Z,1528917272.405 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:14:32.405Z,1528917272.405 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 315
2018-06-13T19:14:32.406Z,1528917272.406 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:14:32.406Z,1528917272.406 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 315
2018-06-13T19:14:32.406Z,1528917272.406 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:14:32.406Z,1528917272.406 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 315
2018-06-13T19:14:32.699Z,1528917272.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:14:32.700Z,1528917272.700 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:14:32.700Z,1528917272.700 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:14:32.700Z,1528917272.700 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:14:32.729Z,1528917272.729 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:14:32.729Z,1528917272.729 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:14:32.730Z,1528917272.730 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:14:32.730Z,1528917272.730 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:14:32.730Z,1528917272.730 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:14:33.103Z,1528917273.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:14:33.104Z,1528917273.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:33.501Z,1528917273.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:14:33.502Z,1528917273.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:33.858Z,1528917273.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:14:33.859Z,1528917273.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:34.314Z,1528917274.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:14:34.314Z,1528917274.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:34.705Z,1528917274.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T19:14:34.706Z,1528917274.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:35.056Z,1528917275.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T19:14:35.063Z,1528917275.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:35.484Z,1528917275.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:14:35.492Z,1528917275.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:35.891Z,1528917275.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T19:14:35.892Z,1528917275.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:36.277Z,1528917276.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T19:14:36.278Z,1528917276.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:36.674Z,1528917276.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T19:14:36.675Z,1528917276.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:37.055Z,1528917277.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T19:14:37.056Z,1528917277.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:37.464Z,1528917277.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T19:14:37.489Z,1528917277.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:37.855Z,1528917277.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T19:14:37.856Z,1528917277.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:38.260Z,1528917278.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T19:14:38.265Z,1528917278.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:38.668Z,1528917278.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T19:14:38.669Z,1528917278.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:39.080Z,1528917279.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T19:14:39.105Z,1528917279.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:39.476Z,1528917279.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T19:14:39.481Z,1528917279.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:39.868Z,1528917279.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T19:14:39.877Z,1528917279.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:40.260Z,1528917280.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T19:14:40.271Z,1528917280.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:40.660Z,1528917280.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T19:14:40.665Z,1528917280.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:41.049Z,1528917281.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T19:14:41.050Z,1528917281.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:41.449Z,1528917281.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T19:14:41.450Z,1528917281.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:41.855Z,1528917281.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T19:14:41.856Z,1528917281.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:42.256Z,1528917282.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T19:14:42.266Z,1528917282.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:42.643Z,1528917282.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T19:14:42.644Z,1528917282.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:43.047Z,1528917283.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T19:14:43.048Z,1528917283.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:43.448Z,1528917283.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T19:14:43.449Z,1528917283.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:43.852Z,1528917283.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T19:14:43.853Z,1528917283.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:44.283Z,1528917284.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T19:14:44.284Z,1528917284.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:44.656Z,1528917284.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T19:14:44.656Z,1528917284.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:45.088Z,1528917285.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T19:14:45.097Z,1528917285.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:45.476Z,1528917285.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:14:45.485Z,1528917285.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:45.864Z,1528917285.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:14:45.869Z,1528917285.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:46.249Z,1528917286.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-06-13T19:14:46.250Z,1528917286.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:46.663Z,1528917286.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:14:46.663Z,1528917286.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:47.074Z,1528917287.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:14:47.074Z,1528917287.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:47.480Z,1528917287.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:14:47.485Z,1528917287.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:47.884Z,1528917287.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:14:47.889Z,1528917287.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:48.279Z,1528917288.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:14:48.280Z,1528917288.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:48.679Z,1528917288.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T19:14:48.680Z,1528917288.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:49.068Z,1528917289.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T19:14:49.077Z,1528917289.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:49.459Z,1528917289.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:14:49.460Z,1528917289.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:49.864Z,1528917289.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T19:14:49.865Z,1528917289.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:50.273Z,1528917290.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T19:14:50.274Z,1528917290.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:50.672Z,1528917290.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T19:14:50.678Z,1528917290.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:51.065Z,1528917291.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T19:14:51.066Z,1528917291.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:51.460Z,1528917291.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T19:14:51.464Z,1528917291.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:51.871Z,1528917291.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T19:14:51.872Z,1528917291.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:52.254Z,1528917292.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:52.666Z,1528917292.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:53.081Z,1528917293.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:53.473Z,1528917293.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:53.894Z,1528917293.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:54.288Z,1528917294.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:54.689Z,1528917294.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:55.086Z,1528917295.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:55.495Z,1528917295.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:55.882Z,1528917295.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:56.294Z,1528917296.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:56.691Z,1528917296.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:14:57.056Z,1528917297.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:04.033Z,1528917304.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:04.226Z,1528917304.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:04.647Z,1528917304.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:05.016Z,1528917305.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:05.387Z,1528917305.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:05.830Z,1528917305.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:06.231Z,1528917306.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:06.649Z,1528917306.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:07.001Z,1528917307.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:07.404Z,1528917307.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:07.811Z,1528917307.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:08.221Z,1528917308.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:08.598Z,1528917308.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:09.004Z,1528917309.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:09.417Z,1528917309.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:09.814Z,1528917309.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:10.206Z,1528917310.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:10.610Z,1528917310.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:11.030Z,1528917311.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:11.398Z,1528917311.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:11.800Z,1528917311.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:12.192Z,1528917312.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:12.596Z,1528917312.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:13.003Z,1528917313.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:13.405Z,1528917313.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:13.796Z,1528917313.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:14.209Z,1528917314.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:14.611Z,1528917314.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:15.056Z,1528917315.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:15.400Z,1528917315.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:15.842Z,1528917315.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:16.189Z,1528917316.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:16.611Z,1528917316.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:17.010Z,1528917317.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:17.411Z,1528917317.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:17.796Z,1528917317.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:18.199Z,1528917318.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:18.589Z,1528917318.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:18.993Z,1528917318.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:19.433Z,1528917319.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:19.832Z,1528917319.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:20.229Z,1528917320.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:20.612Z,1528917320.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:21.003Z,1528917321.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:21.399Z,1528917321.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:21.816Z,1528917321.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:22.207Z,1528917322.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:22.621Z,1528917322.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:23.020Z,1528917323.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:23.433Z,1528917323.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:23.834Z,1528917323.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:24.198Z,1528917324.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:24.603Z,1528917324.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:25.007Z,1528917325.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:25.428Z,1528917325.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:25.827Z,1528917325.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:26.272Z,1528917326.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:26.680Z,1528917326.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:27.046Z,1528917327.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:27.451Z,1528917327.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:27.855Z,1528917327.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:28.296Z,1528917328.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:28.654Z,1528917328.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:29.028Z,1528917329.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:29.432Z,1528917329.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:29.847Z,1528917329.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:30.252Z,1528917330.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:30.595Z,1528917330.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:30.999Z,1528917330.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:31.439Z,1528917331.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:31.811Z,1528917331.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:32.207Z,1528917332.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:32.608Z,1528917332.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:33.043Z,1528917333.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:33.409Z,1528917333.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:33.812Z,1528917333.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:34.202Z,1528917334.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:34.606Z,1528917334.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:35.025Z,1528917335.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:35.407Z,1528917335.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:35.870Z,1528917335.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:36.213Z,1528917336.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:36.632Z,1528917336.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:37.022Z,1528917337.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:37.401Z,1528917337.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:37.824Z,1528917337.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:38.216Z,1528917338.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:38.667Z,1528917338.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:39.009Z,1528917339.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:39.415Z,1528917339.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:39.816Z,1528917339.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:40.180Z,1528917340.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:40.646Z,1528917340.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:41.094Z,1528917341.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:41.486Z,1528917341.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:41.863Z,1528917341.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:42.248Z,1528917342.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:42.646Z,1528917342.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:42.000Z,1528917343.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:43.440Z,1528917343.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:43.823Z,1528917343.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:44.245Z,1528917344.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:44.621Z,1528917344.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:45.008Z,1528917345.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:45.380Z,1528917345.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:45.831Z,1528917345.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:46.214Z,1528917346.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:46.651Z,1528917346.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:47.027Z,1528917347.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:47.422Z,1528917347.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:47.799Z,1528917347.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:48.210Z,1528917348.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:48.609Z,1528917348.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:49.009Z,1528917349.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:49.425Z,1528917349.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:49.796Z,1528917349.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:50.231Z,1528917350.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:50.635Z,1528917350.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:50.980Z,1528917350.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:51.399Z,1528917351.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:51.816Z,1528917351.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:52.209Z,1528917352.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:52.621Z,1528917352.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:53.025Z,1528917353.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:53.410Z,1528917353.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:53.812Z,1528917353.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:54.188Z,1528917354.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:54.582Z,1528917354.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:55.021Z,1528917355.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:55.391Z,1528917355.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:55.831Z,1528917355.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:56.224Z,1528917356.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:56.628Z,1528917356.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:57.004Z,1528917357.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:15:57.390Z,1528917357.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:03.593Z,1528917363.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:03.771Z,1528917363.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:04.168Z,1528917364.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:04.580Z,1528917364.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:04.979Z,1528917364.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:05.361Z,1528917365.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:05.768Z,1528917365.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:06.138Z,1528917366.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:06.573Z,1528917366.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:06.960Z,1528917366.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:07.367Z,1528917367.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:07.767Z,1528917367.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:08.159Z,1528917368.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:08.562Z,1528917368.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:08.940Z,1528917368.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:09.376Z,1528917369.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:09.767Z,1528917369.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:10.143Z,1528917370.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:10.586Z,1528917370.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:10.947Z,1528917370.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:11.347Z,1528917371.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:11.755Z,1528917371.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:12.162Z,1528917372.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:12.551Z,1528917372.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:12.964Z,1528917372.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:13.378Z,1528917373.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:13.764Z,1528917373.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:14.176Z,1528917374.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:14.566Z,1528917374.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:14.946Z,1528917374.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:15.379Z,1528917375.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:15.755Z,1528917375.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:16.194Z,1528917376.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:16.610Z,1528917376.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:16.955Z,1528917376.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:17.356Z,1528917377.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:17.799Z,1528917377.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:18.155Z,1528917378.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:18.567Z,1528917378.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:19.007Z,1528917379.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:19.366Z,1528917379.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:19.776Z,1528917379.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:20.165Z,1528917380.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:20.544Z,1528917380.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:20.948Z,1528917380.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:21.386Z,1528917381.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:21.759Z,1528917381.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:22.191Z,1528917382.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:22.565Z,1528917382.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:22.963Z,1528917382.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:23.359Z,1528917383.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:23.765Z,1528917383.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:24.160Z,1528917384.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:24.564Z,1528917384.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:25.004Z,1528917385.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:25.371Z,1528917385.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:25.813Z,1528917385.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:26.187Z,1528917386.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:26.535Z,1528917386.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:26.980Z,1528917386.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:27.378Z,1528917387.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:27.745Z,1528917387.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:28.154Z,1528917388.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:28.587Z,1528917388.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:28.952Z,1528917388.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:29.346Z,1528917389.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:29.756Z,1528917389.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:30.162Z,1528917390.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:30.542Z,1528917390.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:31.001Z,1528917391.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:31.376Z,1528917391.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:31.778Z,1528917391.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:32.168Z,1528917392.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:32.539Z,1528917392.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:32.971Z,1528917392.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:33.399Z,1528917393.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:33.760Z,1528917393.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:34.162Z,1528917394.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:34.566Z,1528917394.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:34.951Z,1528917394.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:35.348Z,1528917395.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:35.767Z,1528917395.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:36.159Z,1528917396.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:36.569Z,1528917396.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:36.977Z,1528917396.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:37.375Z,1528917397.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:37.774Z,1528917397.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:38.200Z,1528917398.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:38.561Z,1528917398.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:38.948Z,1528917398.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:39.396Z,1528917399.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:39.801Z,1528917399.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:40.176Z,1528917400.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:40.584Z,1528917400.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:40.968Z,1528917400.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:41.368Z,1528917401.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:41.785Z,1528917401.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:42.173Z,1528917402.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:42.575Z,1528917402.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:42.995Z,1528917402.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:43.380Z,1528917403.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:43.783Z,1528917403.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:44.161Z,1528917404.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:44.557Z,1528917404.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:44.948Z,1528917404.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:45.356Z,1528917405.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:45.804Z,1528917405.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:46.174Z,1528917406.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:46.623Z,1528917406.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:46.972Z,1528917406.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:47.364Z,1528917407.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:47.775Z,1528917407.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:48.157Z,1528917408.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:48.556Z,1528917408.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:49.003Z,1528917409.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:49.357Z,1528917409.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:49.768Z,1528917409.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:50.145Z,1528917410.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:50.563Z,1528917410.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:50.956Z,1528917410.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:51.351Z,1528917411.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:51.748Z,1528917411.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:52.163Z,1528917412.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:52.563Z,1528917412.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:52.959Z,1528917412.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:53.359Z,1528917413.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:53.764Z,1528917413.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:54.138Z,1528917414.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:54.551Z,1528917414.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:54.987Z,1528917414.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:55.372Z,1528917415.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:55.766Z,1528917415.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:56.147Z,1528917416.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:56.558Z,1528917416.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:56.959Z,1528917416.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:57.375Z,1528917417.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:16:57.759Z,1528917417.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:04.271Z,1528917424.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:04.474Z,1528917424.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:04.887Z,1528917424.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:05.280Z,1528917425.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:05.691Z,1528917425.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:06.088Z,1528917426.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:06.490Z,1528917426.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:06.887Z,1528917426.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:07.284Z,1528917427.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:07.660Z,1528917427.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:08.070Z,1528917428.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:08.499Z,1528917428.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:08.866Z,1528917428.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:09.274Z,1528917429.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:09.664Z,1528917429.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:10.111Z,1528917430.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:10.485Z,1528917430.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:10.876Z,1528917430.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:11.287Z,1528917431.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:11.677Z,1528917431.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:12.079Z,1528917432.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:12.485Z,1528917432.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:12.898Z,1528917432.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:13.259Z,1528917433.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:13.703Z,1528917433.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:14.048Z,1528917434.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:14.476Z,1528917434.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:14.866Z,1528917434.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:15.276Z,1528917435.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:15.685Z,1528917435.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:16.067Z,1528917436.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:16.504Z,1528917436.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:16.885Z,1528917436.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:17.288Z,1528917437.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:17.688Z,1528917437.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:18.062Z,1528917438.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:18.502Z,1528917438.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:18.897Z,1528917438.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:19.305Z,1528917439.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:19.700Z,1528917439.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:20.064Z,1528917440.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:20.487Z,1528917440.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:20.880Z,1528917440.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:21.283Z,1528917441.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:21.695Z,1528917441.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:22.095Z,1528917442.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:22.494Z,1528917442.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:22.876Z,1528917442.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:23.265Z,1528917443.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:23.668Z,1528917443.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:24.105Z,1528917444.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:24.482Z,1528917444.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:24.891Z,1528917444.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:25.288Z,1528917445.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:25.731Z,1528917445.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:26.074Z,1528917446.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:26.479Z,1528917446.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:26.881Z,1528917446.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:27.283Z,1528917447.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:27.683Z,1528917447.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:28.097Z,1528917448.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:28.481Z,1528917448.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:28.922Z,1528917448.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:29.280Z,1528917449.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:29.682Z,1528917449.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:30.068Z,1528917450.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:30.497Z,1528917450.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:30.900Z,1528917450.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:31.304Z,1528917451.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:31.714Z,1528917451.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:32.080Z,1528917452.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:32.468Z,1528917452.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:32.888Z,1528917452.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:32.888Z,1528917452.888 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 316
2018-06-13T19:17:32.888Z,1528917452.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:17:32.890Z,1528917452.890 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:32.890Z,1528917452.890 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 316
2018-06-13T19:17:32.890Z,1528917452.890 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:17:32.892Z,1528917452.892 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:32.892Z,1528917452.892 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 316
2018-06-13T19:17:32.892Z,1528917452.892 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:17:33.023Z,1528917453.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:17:33.023Z,1528917453.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:17:33.023Z,1528917453.023 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:17:33.374Z,1528917453.374 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:17:33.374Z,1528917453.374 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 316
2018-06-13T19:17:33.374Z,1528917453.374 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:17:33.374Z,1528917453.374 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 316
2018-06-13T19:17:33.375Z,1528917453.375 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:17:33.375Z,1528917453.375 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 316
2018-06-13T19:17:33.685Z,1528917453.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:17:33.686Z,1528917453.686 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:17:33.686Z,1528917453.686 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:17:33.687Z,1528917453.687 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:17:33.687Z,1528917453.687 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:17:33.687Z,1528917453.687 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:17:33.688Z,1528917453.688 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:17:33.688Z,1528917453.688 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:17:33.688Z,1528917453.688 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:17:34.059Z,1528917454.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:17:34.060Z,1528917454.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:34.479Z,1528917454.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:17:34.480Z,1528917454.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:34.893Z,1528917454.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:17:34.894Z,1528917454.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:35.290Z,1528917455.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:17:35.291Z,1528917455.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:35.654Z,1528917455.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T19:17:35.655Z,1528917455.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:36.103Z,1528917456.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T19:17:36.104Z,1528917456.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:36.480Z,1528917456.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:17:36.495Z,1528917456.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:36.876Z,1528917456.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T19:17:36.883Z,1528917456.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:37.288Z,1528917457.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T19:17:37.313Z,1528917457.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:37.715Z,1528917457.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T19:17:37.716Z,1528917457.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:38.077Z,1528917458.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T19:17:38.078Z,1528917458.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:38.480Z,1528917458.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T19:17:38.486Z,1528917458.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:38.885Z,1528917458.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T19:17:38.886Z,1528917458.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:39.241Z,1528917459.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T19:17:39.242Z,1528917459.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:39.731Z,1528917459.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T19:17:39.735Z,1528917459.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:40.080Z,1528917460.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T19:17:40.081Z,1528917460.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:40.485Z,1528917460.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T19:17:40.486Z,1528917460.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:40.886Z,1528917460.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T19:17:40.887Z,1528917460.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:41.312Z,1528917461.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T19:17:41.324Z,1528917461.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:41.683Z,1528917461.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T19:17:41.683Z,1528917461.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:42.087Z,1528917462.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T19:17:42.087Z,1528917462.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:42.464Z,1528917462.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T19:17:42.489Z,1528917462.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:42.895Z,1528917462.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T19:17:42.896Z,1528917462.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:43.302Z,1528917463.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T19:17:43.302Z,1528917463.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:43.672Z,1528917463.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T19:17:43.673Z,1528917463.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:44.075Z,1528917464.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T19:17:44.081Z,1528917464.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:44.476Z,1528917464.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T19:17:44.482Z,1528917464.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:44.894Z,1528917464.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T19:17:44.896Z,1528917464.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:45.309Z,1528917465.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T19:17:45.310Z,1528917465.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:45.646Z,1528917465.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T19:17:45.647Z,1528917465.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:46.084Z,1528917466.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T19:17:46.085Z,1528917466.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:46.486Z,1528917466.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:17:46.487Z,1528917466.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:46.893Z,1528917466.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:17:46.894Z,1528917466.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:47.287Z,1528917467.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T19:17:47.288Z,1528917467.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:47.689Z,1528917467.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:17:47.690Z,1528917467.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:48.057Z,1528917468.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:17:48.059Z,1528917468.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:48.518Z,1528917468.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:17:48.519Z,1528917468.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:48.911Z,1528917468.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:17:48.912Z,1528917468.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:49.298Z,1528917469.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:17:49.299Z,1528917469.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:49.715Z,1528917469.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T19:17:49.740Z,1528917469.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:50.063Z,1528917470.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T19:17:50.064Z,1528917470.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:50.462Z,1528917470.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:17:50.464Z,1528917470.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:50.875Z,1528917470.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T19:17:50.877Z,1528917470.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:51.267Z,1528917471.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T19:17:51.267Z,1528917471.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:51.670Z,1528917471.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T19:17:51.671Z,1528917471.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:52.097Z,1528917472.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T19:17:52.098Z,1528917472.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:52.464Z,1528917472.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T19:17:52.465Z,1528917472.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:52.857Z,1528917472.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T19:17:52.858Z,1528917472.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:53.311Z,1528917473.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:53.668Z,1528917473.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:54.065Z,1528917474.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:54.498Z,1528917474.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:54.877Z,1528917474.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:55.284Z,1528917475.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:55.307Z,1528917475.307 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T19:17:55.307Z,1528917475.307 [Default:CheckIn:C.Wait] Stopped
2018-06-13T19:17:55.307Z,1528917475.307 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T19:17:55.307Z,1528917475.307 [Default:CheckIn:D] Running Loop=1
2018-06-13T19:17:55.669Z,1528917475.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:55.672Z,1528917475.672 [Default:CheckIn:D] Stopped
2018-06-13T19:17:55.672Z,1528917475.672 [Default:CheckIn:E] Running Loop=1
2018-06-13T19:17:56.076Z,1528917476.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:56.083Z,1528917476.083 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 950.703776 min 
2018-06-13T19:17:56.083Z,1528917476.083 [Default:CheckIn:E] Stopped
2018-06-13T19:17:56.083Z,1528917476.083 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T19:17:56.083Z,1528917476.083 [Default:CheckIn] Stopped
2018-06-13T19:17:56.083Z,1528917476.083 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T19:17:56.083Z,1528917476.083 [Default:CheckIn](INFO): Running loop #92
2018-06-13T19:17:56.083Z,1528917476.083 [Default:CheckIn] Running Loop=92
2018-06-13T19:17:56.083Z,1528917476.083 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T19:17:56.084Z,1528917476.084 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T19:17:56.459Z,1528917476.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:56.908Z,1528917476.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:57.264Z,1528917477.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:57.648Z,1528917477.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:17:58.114Z,1528917478.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:03.553Z,1528917483.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:03.759Z,1528917483.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:04.171Z,1528917484.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:04.562Z,1528917484.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:04.935Z,1528917484.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:05.333Z,1528917485.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:05.762Z,1528917485.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:06.164Z,1528917486.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:06.540Z,1528917486.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:06.974Z,1528917486.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:07.345Z,1528917487.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:07.755Z,1528917487.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:08.135Z,1528917488.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:08.530Z,1528917488.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:08.974Z,1528917488.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:09.355Z,1528917489.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:09.741Z,1528917489.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:10.142Z,1528917490.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:10.551Z,1528917490.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:10.955Z,1528917490.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:11.350Z,1528917491.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:11.731Z,1528917491.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:12.173Z,1528917492.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:12.567Z,1528917492.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:12.948Z,1528917492.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:13.344Z,1528917493.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:13.790Z,1528917493.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:14.143Z,1528917494.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:14.547Z,1528917494.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:14.967Z,1528917494.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:15.357Z,1528917495.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:15.756Z,1528917495.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:16.176Z,1528917496.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:16.559Z,1528917496.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:16.978Z,1528917496.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:17.348Z,1528917497.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:17.734Z,1528917497.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:18.171Z,1528917498.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:18.570Z,1528917498.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:18.944Z,1528917498.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:19.336Z,1528917499.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:19.740Z,1528917499.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:20.131Z,1528917500.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:20.526Z,1528917500.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:20.957Z,1528917500.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:21.353Z,1528917501.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:21.763Z,1528917501.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:22.196Z,1528917502.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:22.548Z,1528917502.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:22.928Z,1528917502.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:23.362Z,1528917503.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:23.726Z,1528917503.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:24.146Z,1528917504.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:24.549Z,1528917504.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:24.948Z,1528917504.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:25.351Z,1528917505.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:25.730Z,1528917505.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:26.134Z,1528917506.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:26.565Z,1528917506.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:26.975Z,1528917506.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:27.368Z,1528917507.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:27.750Z,1528917507.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:28.135Z,1528917508.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:28.540Z,1528917508.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:28.956Z,1528917508.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:29.315Z,1528917509.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:29.748Z,1528917509.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:30.145Z,1528917510.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:30.566Z,1528917510.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:30.985Z,1528917510.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:31.328Z,1528917511.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:31.724Z,1528917511.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:32.140Z,1528917512.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:32.552Z,1528917512.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:32.948Z,1528917512.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:33.339Z,1528917513.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:33.771Z,1528917513.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:34.126Z,1528917514.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:34.537Z,1528917514.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:34.941Z,1528917514.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:35.340Z,1528917515.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:35.706Z,1528917515.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:36.124Z,1528917516.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:36.555Z,1528917516.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:36.936Z,1528917516.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:37.331Z,1528917517.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:37.742Z,1528917517.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:38.113Z,1528917518.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:38.637Z,1528917518.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:38.955Z,1528917518.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:39.350Z,1528917519.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:39.754Z,1528917519.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:40.148Z,1528917520.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:40.557Z,1528917520.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:40.920Z,1528917520.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:41.338Z,1528917521.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:41.736Z,1528917521.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:42.174Z,1528917522.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:42.549Z,1528917522.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:42.949Z,1528917522.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:43.328Z,1528917523.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:43.767Z,1528917523.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:44.129Z,1528917524.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:44.516Z,1528917524.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:44.979Z,1528917524.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:45.339Z,1528917525.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:45.749Z,1528917525.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:46.146Z,1528917526.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:46.544Z,1528917526.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:46.954Z,1528917526.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:47.357Z,1528917527.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:47.744Z,1528917527.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:48.124Z,1528917528.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:48.546Z,1528917528.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:48.962Z,1528917528.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:49.334Z,1528917529.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:49.766Z,1528917529.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:50.130Z,1528917530.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:50.540Z,1528917530.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:50.944Z,1528917530.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:51.354Z,1528917531.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:51.748Z,1528917531.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:52.144Z,1528917532.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:52.517Z,1528917532.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:52.951Z,1528917532.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:53.353Z,1528917533.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:53.720Z,1528917533.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:54.150Z,1528917534.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:54.562Z,1528917534.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:54.925Z,1528917534.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:55.339Z,1528917535.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:55.720Z,1528917535.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:56.145Z,1528917536.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:56.546Z,1528917536.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:56.973Z,1528917536.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:57.355Z,1528917537.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:57.741Z,1528917537.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:18:58.136Z,1528917538.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:04.839Z,1528917544.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:05.044Z,1528917545.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:05.443Z,1528917545.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:05.833Z,1528917545.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:06.231Z,1528917546.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:06.627Z,1528917546.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:07.004Z,1528917547.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:07.411Z,1528917547.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:07.811Z,1528917547.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:08.216Z,1528917548.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:08.638Z,1528917548.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:09.046Z,1528917549.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:09.439Z,1528917549.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:09.836Z,1528917549.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:10.248Z,1528917550.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:10.631Z,1528917550.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:11.065Z,1528917551.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:11.441Z,1528917551.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:11.804Z,1528917551.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:12.202Z,1528917552.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:12.611Z,1528917552.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:13.007Z,1528917553.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:13.416Z,1528917553.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:13.822Z,1528917553.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:14.226Z,1528917554.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:14.616Z,1528917554.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:15.055Z,1528917555.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:15.408Z,1528917555.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:15.816Z,1528917555.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:16.218Z,1528917556.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:16.620Z,1528917556.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:17.030Z,1528917557.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:17.438Z,1528917557.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:17.824Z,1528917557.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:18.225Z,1528917558.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:18.636Z,1528917558.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:18.993Z,1528917558.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:19.396Z,1528917559.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:19.838Z,1528917559.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:20.215Z,1528917560.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:20.604Z,1528917560.604 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T19:19:20.604Z,1528917560.604 [BPC1] Communications Fault, FailCount= 3
2018-06-13T19:19:20.604Z,1528917560.604 [BPC1](ERROR): Communications Fault
2018-06-13T19:19:20.670Z,1528917560.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:20.772Z,1528917560.772 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T19:19:21.030Z,1528917561.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:21.416Z,1528917561.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:21.828Z,1528917561.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:21.931Z,1528917561.931 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T19:19:21.931Z,1528917561.931 [BPC1] No Fault, FailCount= 3
2018-06-13T19:19:22.277Z,1528917562.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:22.604Z,1528917562.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:23.030Z,1528917563.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:23.452Z,1528917563.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:23.853Z,1528917563.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:24.192Z,1528917564.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:24.615Z,1528917564.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:24.980Z,1528917564.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:25.439Z,1528917565.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:25.843Z,1528917565.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:26.234Z,1528917566.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:26.677Z,1528917566.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:27.043Z,1528917567.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:27.429Z,1528917567.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:27.804Z,1528917567.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:28.234Z,1528917568.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:28.596Z,1528917568.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:29.015Z,1528917569.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:29.449Z,1528917569.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:29.802Z,1528917569.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:30.227Z,1528917570.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:30.646Z,1528917570.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:31.024Z,1528917571.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:31.423Z,1528917571.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:31.823Z,1528917571.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:32.231Z,1528917572.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:32.629Z,1528917572.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:33.047Z,1528917573.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:33.398Z,1528917573.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:33.796Z,1528917573.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:34.200Z,1528917574.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:34.614Z,1528917574.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:35.050Z,1528917575.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:35.473Z,1528917575.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:35.828Z,1528917575.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:36.228Z,1528917576.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:36.631Z,1528917576.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:37.023Z,1528917577.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:37.425Z,1528917577.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:37.839Z,1528917577.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:38.230Z,1528917578.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:38.629Z,1528917578.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:39.043Z,1528917579.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:39.415Z,1528917579.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:39.809Z,1528917579.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:40.222Z,1528917580.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:40.634Z,1528917580.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:41.022Z,1528917581.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:41.439Z,1528917581.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:41.839Z,1528917581.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:42.194Z,1528917582.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:42.635Z,1528917582.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:42.996Z,1528917582.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:43.436Z,1528917583.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:43.853Z,1528917583.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:44.262Z,1528917584.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:44.659Z,1528917584.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:45.017Z,1528917585.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:45.413Z,1528917585.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:45.810Z,1528917585.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:46.228Z,1528917586.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:46.620Z,1528917586.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:47.012Z,1528917587.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:47.438Z,1528917587.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:47.826Z,1528917587.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:48.219Z,1528917588.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:48.640Z,1528917588.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:49.004Z,1528917589.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:49.430Z,1528917589.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:49.843Z,1528917589.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:50.247Z,1528917590.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:50.636Z,1528917590.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:51.108Z,1528917591.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:51.416Z,1528917591.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:51.813Z,1528917591.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:52.250Z,1528917592.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:52.600Z,1528917592.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:53.019Z,1528917593.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:53.416Z,1528917593.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:53.831Z,1528917593.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:54.263Z,1528917594.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:54.608Z,1528917594.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:54.982Z,1528917594.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:55.416Z,1528917595.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:55.825Z,1528917595.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:56.221Z,1528917596.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:56.628Z,1528917596.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:57.043Z,1528917597.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:57.406Z,1528917597.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:57.802Z,1528917597.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:19:58.199Z,1528917598.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:04.192Z,1528917604.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:04.411Z,1528917604.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:04.796Z,1528917604.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:05.174Z,1528917605.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:05.603Z,1528917605.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:05.997Z,1528917605.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:06.368Z,1528917606.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:06.770Z,1528917606.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:07.198Z,1528917607.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:07.572Z,1528917607.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:08.009Z,1528917608.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:08.380Z,1528917608.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:08.769Z,1528917608.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:09.180Z,1528917609.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:09.598Z,1528917609.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:09.983Z,1528917609.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:10.384Z,1528917610.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:10.788Z,1528917610.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:11.192Z,1528917611.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:11.590Z,1528917611.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:12.004Z,1528917612.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:12.402Z,1528917612.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:12.791Z,1528917612.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:13.201Z,1528917613.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:13.572Z,1528917613.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:14.014Z,1528917614.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:14.404Z,1528917614.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:14.756Z,1528917614.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:15.180Z,1528917615.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:15.584Z,1528917615.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:15.982Z,1528917615.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:16.371Z,1528917616.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:16.784Z,1528917616.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:17.186Z,1528917617.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:17.577Z,1528917617.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:17.988Z,1528917617.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:18.388Z,1528917618.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:18.793Z,1528917618.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:19.167Z,1528917619.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:19.575Z,1528917619.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:20.005Z,1528917620.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:20.415Z,1528917620.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:20.788Z,1528917620.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:21.176Z,1528917621.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:21.574Z,1528917621.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:21.996Z,1528917621.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:22.389Z,1528917622.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:22.814Z,1528917622.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:23.207Z,1528917623.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:23.580Z,1528917623.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:24.031Z,1528917624.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:24.388Z,1528917624.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:24.802Z,1528917624.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:25.206Z,1528917625.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:25.594Z,1528917625.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:25.975Z,1528917625.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:26.419Z,1528917626.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:26.793Z,1528917626.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:27.189Z,1528917627.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:27.599Z,1528917627.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:27.982Z,1528917627.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:28.391Z,1528917628.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:28.808Z,1528917628.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:29.184Z,1528917629.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:29.565Z,1528917629.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:29.996Z,1528917629.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:30.375Z,1528917630.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:30.759Z,1528917630.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:31.174Z,1528917631.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:31.581Z,1528917631.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:31.986Z,1528917631.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:32.455Z,1528917632.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:32.810Z,1528917632.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:33.184Z,1528917633.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:33.608Z,1528917633.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:34.004Z,1528917634.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:34.004Z,1528917634.004 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 317
2018-06-13T19:20:34.004Z,1528917634.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:20:34.010Z,1528917634.010 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:34.010Z,1528917634.010 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 317
2018-06-13T19:20:34.010Z,1528917634.010 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:20:34.012Z,1528917634.012 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:34.012Z,1528917634.012 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 317
2018-06-13T19:20:34.012Z,1528917634.012 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:20:34.125Z,1528917634.125 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:20:34.125Z,1528917634.125 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:20:34.126Z,1528917634.126 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:20:34.485Z,1528917634.485 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:20:34.485Z,1528917634.485 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 317
2018-06-13T19:20:34.485Z,1528917634.485 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:20:34.486Z,1528917634.486 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 317
2018-06-13T19:20:34.486Z,1528917634.486 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:20:34.486Z,1528917634.486 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 317
2018-06-13T19:20:34.795Z,1528917634.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:20:34.795Z,1528917634.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:20:34.795Z,1528917634.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:20:34.796Z,1528917634.796 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:20:34.796Z,1528917634.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:20:34.796Z,1528917634.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:20:34.807Z,1528917634.807 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:20:34.808Z,1528917634.808 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:20:34.808Z,1528917634.808 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:20:35.176Z,1528917635.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:20:35.182Z,1528917635.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:35.583Z,1528917635.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:20:35.584Z,1528917635.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:35.988Z,1528917635.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:20:35.989Z,1528917635.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:36.404Z,1528917636.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:20:36.429Z,1528917636.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:36.788Z,1528917636.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T19:20:36.794Z,1528917636.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:37.162Z,1528917637.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T19:20:37.163Z,1528917637.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:37.598Z,1528917637.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:20:37.599Z,1528917637.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:37.000Z,1528917638.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T19:20:38.005Z,1528917638.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:38.408Z,1528917638.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T19:20:38.410Z,1528917638.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:38.792Z,1528917638.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T19:20:38.796Z,1528917638.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:39.202Z,1528917639.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T19:20:39.203Z,1528917639.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:39.618Z,1528917639.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T19:20:39.619Z,1528917639.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:39.976Z,1528917639.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T19:20:39.981Z,1528917639.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:40.388Z,1528917640.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T19:20:40.393Z,1528917640.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:40.794Z,1528917640.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T19:20:40.795Z,1528917640.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:41.195Z,1528917641.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T19:20:41.196Z,1528917641.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:41.580Z,1528917641.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T19:20:41.581Z,1528917641.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:42.021Z,1528917642.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T19:20:42.022Z,1528917642.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:42.381Z,1528917642.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T19:20:42.382Z,1528917642.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:42.798Z,1528917642.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T19:20:42.799Z,1528917642.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:43.209Z,1528917643.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T19:20:43.210Z,1528917643.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:43.573Z,1528917643.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T19:20:43.574Z,1528917643.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:43.972Z,1528917643.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T19:20:43.977Z,1528917643.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:44.388Z,1528917644.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T19:20:44.406Z,1528917644.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:44.791Z,1528917644.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T19:20:44.792Z,1528917644.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:45.217Z,1528917645.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T19:20:45.218Z,1528917645.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:45.632Z,1528917645.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T19:20:45.633Z,1528917645.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:45.972Z,1528917645.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T19:20:45.975Z,1528917645.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:46.376Z,1528917646.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T19:20:46.382Z,1528917646.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:46.779Z,1528917646.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T19:20:46.780Z,1528917646.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:47.188Z,1528917647.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T19:20:47.197Z,1528917647.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:47.603Z,1528917647.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:20:47.604Z,1528917647.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:48.010Z,1528917648.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:20:48.011Z,1528917648.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:48.389Z,1528917648.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T19:20:48.390Z,1528917648.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:48.790Z,1528917648.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:20:48.790Z,1528917648.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:49.214Z,1528917649.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:20:49.215Z,1528917649.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:49.568Z,1528917649.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:20:49.574Z,1528917649.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:49.957Z,1528917649.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:20:49.959Z,1528917649.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:50.379Z,1528917650.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:20:50.380Z,1528917650.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:50.800Z,1528917650.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T19:20:50.806Z,1528917650.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:51.257Z,1528917651.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T19:20:51.258Z,1528917651.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:51.605Z,1528917651.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:20:51.606Z,1528917651.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:51.973Z,1528917651.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T19:20:51.974Z,1528917651.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:52.356Z,1528917652.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T19:20:52.357Z,1528917652.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:52.780Z,1528917652.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T19:20:52.802Z,1528917652.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:53.176Z,1528917653.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T19:20:53.177Z,1528917653.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:53.598Z,1528917653.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T19:20:53.598Z,1528917653.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:54.009Z,1528917654.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:54.370Z,1528917654.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:54.792Z,1528917654.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:55.170Z,1528917655.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:55.591Z,1528917655.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:55.959Z,1528917655.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:56.422Z,1528917656.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:56.810Z,1528917656.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:20:57.205Z,1528917657.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:03.602Z,1528917663.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:03.770Z,1528917663.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:04.207Z,1528917664.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:04.608Z,1528917664.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:05.016Z,1528917665.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:05.376Z,1528917665.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:05.775Z,1528917665.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:06.151Z,1528917666.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:06.576Z,1528917666.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:06.998Z,1528917666.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:07.356Z,1528917667.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:07.799Z,1528917667.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:08.251Z,1528917668.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:08.586Z,1528917668.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:08.976Z,1528917668.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:09.371Z,1528917669.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:09.766Z,1528917669.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:10.164Z,1528917670.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:10.589Z,1528917670.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:10.995Z,1528917670.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:11.351Z,1528917671.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:11.789Z,1528917671.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:12.157Z,1528917672.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:12.570Z,1528917672.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:13.003Z,1528917673.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:13.397Z,1528917673.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:13.787Z,1528917673.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:14.181Z,1528917674.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:14.583Z,1528917674.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:14.975Z,1528917674.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:15.352Z,1528917675.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:15.787Z,1528917675.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:16.183Z,1528917676.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:16.586Z,1528917676.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:16.970Z,1528917676.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:17.360Z,1528917677.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:17.760Z,1528917677.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:18.169Z,1528917678.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:18.578Z,1528917678.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:18.971Z,1528917678.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:19.382Z,1528917679.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:19.792Z,1528917679.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:20.233Z,1528917680.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:20.577Z,1528917680.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:20.966Z,1528917680.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:21.388Z,1528917681.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:21.787Z,1528917681.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:22.209Z,1528917682.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:22.608Z,1528917682.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:22.970Z,1528917682.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:23.371Z,1528917683.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:23.777Z,1528917683.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:24.147Z,1528917684.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:24.593Z,1528917684.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:24.955Z,1528917684.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:25.398Z,1528917685.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:25.792Z,1528917685.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:26.209Z,1528917686.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:26.564Z,1528917686.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:26.956Z,1528917686.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:27.409Z,1528917687.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:27.766Z,1528917687.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:28.207Z,1528917688.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:28.609Z,1528917688.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:29.017Z,1528917689.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:29.371Z,1528917689.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:29.775Z,1528917689.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:30.193Z,1528917690.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:30.582Z,1528917690.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:30.962Z,1528917690.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:31.409Z,1528917691.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:31.804Z,1528917691.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:32.205Z,1528917692.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:32.576Z,1528917692.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:32.970Z,1528917692.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:33.376Z,1528917693.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:33.773Z,1528917693.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:34.223Z,1528917694.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:34.595Z,1528917694.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:34.970Z,1528917694.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:35.357Z,1528917695.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:35.767Z,1528917695.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:36.174Z,1528917696.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:36.576Z,1528917696.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:36.975Z,1528917696.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:37.371Z,1528917697.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:37.774Z,1528917697.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:38.193Z,1528917698.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:38.581Z,1528917698.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:38.988Z,1528917698.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:39.386Z,1528917699.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:39.789Z,1528917699.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:40.162Z,1528917700.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:40.603Z,1528917700.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:40.972Z,1528917700.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:41.364Z,1528917701.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:41.778Z,1528917701.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:42.166Z,1528917702.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:42.580Z,1528917702.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:42.984Z,1528917702.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:43.396Z,1528917703.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:43.805Z,1528917703.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:44.203Z,1528917704.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:44.548Z,1528917704.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:44.968Z,1528917704.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:45.374Z,1528917705.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:45.774Z,1528917705.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:46.179Z,1528917706.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:46.600Z,1528917706.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:46.981Z,1528917706.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:47.351Z,1528917707.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:47.784Z,1528917707.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:48.152Z,1528917708.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:48.563Z,1528917708.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:48.976Z,1528917708.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:49.372Z,1528917709.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:49.765Z,1528917709.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:50.234Z,1528917710.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:50.550Z,1528917710.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:50.959Z,1528917710.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:51.423Z,1528917711.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:51.785Z,1528917711.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:52.188Z,1528917712.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:52.593Z,1528917712.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:52.989Z,1528917712.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:53.398Z,1528917713.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:53.791Z,1528917713.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:54.190Z,1528917714.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:54.566Z,1528917714.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:55.016Z,1528917715.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:55.406Z,1528917715.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:55.808Z,1528917715.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:56.188Z,1528917716.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:56.568Z,1528917716.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:56.985Z,1528917716.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:57.398Z,1528917717.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:57.775Z,1528917717.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:58.188Z,1528917718.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:21:58.601Z,1528917718.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:04.652Z,1528917724.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:04.826Z,1528917724.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:05.228Z,1528917725.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:05.589Z,1528917725.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:06.004Z,1528917726.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:06.440Z,1528917726.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:06.834Z,1528917726.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:07.258Z,1528917727.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:07.642Z,1528917727.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:07.983Z,1528917727.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:08.395Z,1528917728.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:08.796Z,1528917728.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:09.199Z,1528917729.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:09.604Z,1528917729.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:10.030Z,1528917730.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:10.396Z,1528917730.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:10.798Z,1528917730.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:11.210Z,1528917731.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:11.616Z,1528917731.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:12.007Z,1528917732.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:12.432Z,1528917732.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:12.800Z,1528917732.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:13.209Z,1528917733.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:13.612Z,1528917733.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:13.989Z,1528917733.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:14.393Z,1528917734.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:14.796Z,1528917734.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:15.217Z,1528917735.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:15.616Z,1528917735.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:16.015Z,1528917736.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:16.403Z,1528917736.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:16.814Z,1528917736.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:17.218Z,1528917737.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:17.594Z,1528917737.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:17.988Z,1528917737.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:18.420Z,1528917738.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:18.821Z,1528917738.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:19.204Z,1528917739.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:19.609Z,1528917739.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:20.015Z,1528917740.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:20.398Z,1528917740.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:20.810Z,1528917740.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:21.261Z,1528917741.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:21.620Z,1528917741.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:22.028Z,1528917742.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:22.422Z,1528917742.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:22.828Z,1528917742.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:23.225Z,1528917743.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:23.598Z,1528917743.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:24.029Z,1528917744.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:24.442Z,1528917744.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:24.828Z,1528917744.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:25.224Z,1528917745.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:25.626Z,1528917745.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:26.003Z,1528917746.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:26.400Z,1528917746.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:26.812Z,1528917746.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:27.238Z,1528917747.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:27.619Z,1528917747.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:28.013Z,1528917748.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:28.413Z,1528917748.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:28.825Z,1528917748.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:29.188Z,1528917749.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:29.602Z,1528917749.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:30.019Z,1528917750.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:30.437Z,1528917750.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:30.812Z,1528917750.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:31.224Z,1528917751.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:31.608Z,1528917751.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:32.020Z,1528917752.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:32.402Z,1528917752.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:32.831Z,1528917752.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:33.208Z,1528917753.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:33.611Z,1528917753.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:34.014Z,1528917754.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:34.450Z,1528917754.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:34.798Z,1528917754.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:35.214Z,1528917755.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:35.626Z,1528917755.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:36.006Z,1528917756.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:36.427Z,1528917756.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:36.823Z,1528917756.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:37.365Z,1528917757.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:37.620Z,1528917757.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:37.996Z,1528917757.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:38.392Z,1528917758.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:38.811Z,1528917758.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:39.209Z,1528917759.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:39.622Z,1528917759.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:40.031Z,1528917760.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:40.394Z,1528917760.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:40.803Z,1528917760.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:41.268Z,1528917761.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:41.618Z,1528917761.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:42.015Z,1528917762.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:42.436Z,1528917762.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:42.747Z,1528917762.747 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T19:22:42.747Z,1528917762.747 [NAL9602] Data Fault, FailCount= 2
2018-06-13T19:22:42.747Z,1528917762.747 [NAL9602](ERROR): Data Fault
2018-06-13T19:22:42.837Z,1528917762.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:42.946Z,1528917762.946 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T19:22:43.146Z,1528917763.146 [NAL9602](INFO): Powering down
2018-06-13T19:22:43.208Z,1528917763.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:43.607Z,1528917763.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:43.997Z,1528917763.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:44.081Z,1528917764.081 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T19:22:44.081Z,1528917764.081 [NAL9602] No Fault, FailCount= 2
2018-06-13T19:22:44.439Z,1528917764.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:44.815Z,1528917764.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:45.212Z,1528917765.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:45.612Z,1528917765.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:46.014Z,1528917766.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:46.407Z,1528917766.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:46.857Z,1528917766.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:47.188Z,1528917767.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:47.599Z,1528917767.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:47.988Z,1528917767.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:48.420Z,1528917768.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:48.809Z,1528917768.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:49.208Z,1528917769.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:49.624Z,1528917769.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:50.003Z,1528917770.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:50.426Z,1528917770.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:50.832Z,1528917770.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:51.199Z,1528917771.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:51.600Z,1528917771.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:52.004Z,1528917772.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:52.435Z,1528917772.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:52.798Z,1528917772.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:53.241Z,1528917773.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:53.604Z,1528917773.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:54.010Z,1528917774.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:54.416Z,1528917774.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:54.813Z,1528917774.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:55.203Z,1528917775.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:55.618Z,1528917775.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:56.006Z,1528917776.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:56.404Z,1528917776.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:56.412Z,1528917776.412 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T19:17:56.1Z
2018-06-13T19:22:56.412Z,1528917776.412 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T19:22:56.412Z,1528917776.412 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T19:22:56.824Z,1528917776.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:59.364Z,1528917779.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:59.566Z,1528917779.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:22:59.964Z,1528917779.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:06.418Z,1528917786.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:06.513Z,1528917786.513 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0368.lzma
2018-06-13T19:23:06.608Z,1528917786.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:07.010Z,1528917787.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:07.314Z,1528917787.314 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0368.lzma.bak
2018-06-13T19:23:07.314Z,1528917787.314 [DataOverHttps](INFO): SBD MOMSN=8329791
2018-06-13T19:23:07.370Z,1528917787.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:10.748Z,1528917790.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:10.961Z,1528917790.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:16.409Z,1528917796.409 [NAL9602](INFO): Powering up NAL9602
2018-06-13T19:23:16.502Z,1528917796.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:16.696Z,1528917796.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:17.112Z,1528917797.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:17.489Z,1528917797.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:17.912Z,1528917797.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:18.339Z,1528917798.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:18.710Z,1528917798.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:19.102Z,1528917799.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:19.492Z,1528917799.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:19.888Z,1528917799.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:26.455Z,1528917806.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:26.569Z,1528917806.569 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180613T032335/Express0369.lzma
2018-06-13T19:23:26.648Z,1528917806.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:27.042Z,1528917807.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:27.372Z,1528917807.372 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0369.lzma.bak
2018-06-13T19:23:27.372Z,1528917807.372 [DataOverHttps](INFO): SBD MOMSN=8329793
2018-06-13T19:23:27.379Z,1528917807.379 [NAL9602](INFO): NAL9602 initialized
2018-06-13T19:23:27.465Z,1528917807.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:31.219Z,1528917811.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:31.222Z,1528917811.222 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T19:23:31.222Z,1528917811.222 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T19:23:31.222Z,1528917811.222 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T19:23:31.444Z,1528917811.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:37.759Z,1528917817.759 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:37.759Z,1528917817.759 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 318
2018-06-13T19:23:37.759Z,1528917817.759 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:23:37.761Z,1528917817.761 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:37.761Z,1528917817.761 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 318
2018-06-13T19:23:37.761Z,1528917817.761 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:23:37.769Z,1528917817.769 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:37.770Z,1528917817.770 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 318
2018-06-13T19:23:37.770Z,1528917817.770 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:23:37.889Z,1528917817.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:23:37.890Z,1528917817.890 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:23:37.890Z,1528917817.890 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:23:38.097Z,1528917818.097 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:23:38.097Z,1528917818.097 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 318
2018-06-13T19:23:38.098Z,1528917818.098 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:23:38.098Z,1528917818.098 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 318
2018-06-13T19:23:38.098Z,1528917818.098 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:23:38.098Z,1528917818.098 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 318
2018-06-13T19:23:38.367Z,1528917818.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:23:38.368Z,1528917818.368 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:23:38.368Z,1528917818.368 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:23:38.368Z,1528917818.368 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:23:38.373Z,1528917818.373 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:23:38.373Z,1528917818.373 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:23:38.374Z,1528917818.374 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:23:38.374Z,1528917818.374 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:23:38.375Z,1528917818.375 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:23:38.781Z,1528917818.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T19:23:38.783Z,1528917818.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:39.180Z,1528917819.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T19:23:39.185Z,1528917819.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:39.566Z,1528917819.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T19:23:39.567Z,1528917819.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:39.990Z,1528917819.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T19:23:39.991Z,1528917819.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:40.356Z,1528917820.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T19:23:40.361Z,1528917820.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:40.759Z,1528917820.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T19:23:40.761Z,1528917820.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:41.173Z,1528917821.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T19:23:41.174Z,1528917821.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:41.552Z,1528917821.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T19:23:41.562Z,1528917821.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:41.952Z,1528917821.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T19:23:41.952Z,1528917821.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:42.384Z,1528917822.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T19:23:42.389Z,1528917822.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:42.763Z,1528917822.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T19:23:42.765Z,1528917822.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:43.172Z,1528917823.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T19:23:43.174Z,1528917823.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:43.574Z,1528917823.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T19:23:43.575Z,1528917823.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:43.959Z,1528917823.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T19:23:43.959Z,1528917823.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:44.374Z,1528917824.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T19:23:44.375Z,1528917824.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:44.764Z,1528917824.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T19:23:44.770Z,1528917824.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:45.176Z,1528917825.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T19:23:45.182Z,1528917825.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:45.576Z,1528917825.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T19:23:45.581Z,1528917825.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:45.971Z,1528917825.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T19:23:45.972Z,1528917825.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:46.376Z,1528917826.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T19:23:46.381Z,1528917826.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:46.756Z,1528917826.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T19:23:46.769Z,1528917826.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:47.171Z,1528917827.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T19:23:47.172Z,1528917827.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:47.592Z,1528917827.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T19:23:47.597Z,1528917827.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:47.985Z,1528917827.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T19:23:47.986Z,1528917827.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:48.350Z,1528917828.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T19:23:48.351Z,1528917828.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:48.769Z,1528917828.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T19:23:48.770Z,1528917828.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:49.162Z,1528917829.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T19:23:49.163Z,1528917829.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:49.582Z,1528917829.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-06-13T19:23:49.583Z,1528917829.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:49.977Z,1528917829.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T19:23:49.978Z,1528917829.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:50.384Z,1528917830.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T19:23:50.389Z,1528917830.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:50.779Z,1528917830.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T19:23:50.780Z,1528917830.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:51.181Z,1528917831.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T19:23:51.182Z,1528917831.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:51.602Z,1528917831.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T19:23:51.603Z,1528917831.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:52.026Z,1528917832.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-06-13T19:23:52.027Z,1528917832.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:52.419Z,1528917832.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T19:23:52.420Z,1528917832.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:52.803Z,1528917832.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T19:23:52.804Z,1528917832.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:53.182Z,1528917833.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T19:23:53.183Z,1528917833.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:53.625Z,1528917833.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T19:23:53.626Z,1528917833.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:53.986Z,1528917833.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T19:23:53.987Z,1528917833.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:54.374Z,1528917834.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T19:23:54.375Z,1528917834.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:54.748Z,1528917834.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T19:23:54.753Z,1528917834.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:55.187Z,1528917835.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T19:23:55.188Z,1528917835.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:55.571Z,1528917835.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T19:23:55.572Z,1528917835.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:55.979Z,1528917835.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T19:23:55.980Z,1528917835.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:56.359Z,1528917836.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T19:23:56.360Z,1528917836.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:56.754Z,1528917836.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T19:23:56.755Z,1528917836.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:57.187Z,1528917837.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T19:23:57.188Z,1528917837.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:57.568Z,1528917837.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T19:23:57.593Z,1528917837.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:58.005Z,1528917838.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:58.334Z,1528917838.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:58.780Z,1528917838.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:59.181Z,1528917839.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:59.593Z,1528917839.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:23:59.996Z,1528917839.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:00.359Z,1528917840.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:00.758Z,1528917840.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:01.197Z,1528917841.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:01.604Z,1528917841.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:01.970Z,1528917841.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:02.382Z,1528917842.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:02.774Z,1528917842.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:03.172Z,1528917843.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:03.593Z,1528917843.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:03.975Z,1528917843.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:04.348Z,1528917844.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:04.756Z,1528917844.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:05.190Z,1528917845.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:05.592Z,1528917845.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:06.011Z,1528917846.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:06.358Z,1528917846.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:06.753Z,1528917846.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:07.215Z,1528917847.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:07.581Z,1528917847.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:07.975Z,1528917847.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:08.373Z,1528917848.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:08.786Z,1528917848.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:09.190Z,1528917849.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:09.576Z,1528917849.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:09.988Z,1528917849.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:10.385Z,1528917850.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:10.750Z,1528917850.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:11.175Z,1528917851.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:11.576Z,1528917851.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:11.983Z,1528917851.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:12.356Z,1528917852.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:12.756Z,1528917852.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:13.160Z,1528917853.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:13.596Z,1528917853.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:13.968Z,1528917853.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:14.346Z,1528917854.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:14.755Z,1528917854.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:15.152Z,1528917855.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:15.579Z,1528917855.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:16.001Z,1528917856.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:16.352Z,1528917856.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:16.784Z,1528917856.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:17.183Z,1528917857.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:17.556Z,1528917857.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:17.983Z,1528917857.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:18.362Z,1528917858.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:18.760Z,1528917858.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:19.162Z,1528917859.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:19.597Z,1528917859.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:19.984Z,1528917859.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:20.372Z,1528917860.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:20.760Z,1528917860.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:21.204Z,1528917861.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:21.561Z,1528917861.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:21.972Z,1528917861.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:22.377Z,1528917862.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:22.781Z,1528917862.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:23.199Z,1528917863.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:23.560Z,1528917863.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:23.962Z,1528917863.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:24.362Z,1528917864.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:24.767Z,1528917864.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:25.174Z,1528917865.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:25.568Z,1528917865.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:25.978Z,1528917865.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:26.380Z,1528917866.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:26.793Z,1528917866.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:27.182Z,1528917867.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:27.570Z,1528917867.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:27.954Z,1528917867.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:28.371Z,1528917868.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:28.776Z,1528917868.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:29.182Z,1528917869.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:29.567Z,1528917869.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:29.966Z,1528917869.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:30.370Z,1528917870.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:30.774Z,1528917870.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:31.167Z,1528917871.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:31.602Z,1528917871.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:32.000Z,1528917872.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:32.404Z,1528917872.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:32.761Z,1528917872.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:33.162Z,1528917873.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:39.905Z,1528917879.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:40.079Z,1528917880.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:40.468Z,1528917880.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:40.888Z,1528917880.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:41.283Z,1528917881.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:41.677Z,1528917881.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:42.091Z,1528917882.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:42.463Z,1528917882.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:42.865Z,1528917882.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:43.319Z,1528917883.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:43.661Z,1528917883.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:44.072Z,1528917884.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:44.481Z,1528917884.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:44.864Z,1528917884.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:45.289Z,1528917885.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:45.695Z,1528917885.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:46.046Z,1528917886.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:46.504Z,1528917886.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:46.897Z,1528917886.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:47.274Z,1528917887.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:47.672Z,1528917887.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:48.068Z,1528917888.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:48.472Z,1528917888.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:48.861Z,1528917888.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:49.354Z,1528917889.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:49.674Z,1528917889.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:50.079Z,1528917890.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:50.487Z,1528917890.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:50.876Z,1528917890.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:51.262Z,1528917891.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:51.702Z,1528917891.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:52.074Z,1528917892.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:52.487Z,1528917892.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:52.900Z,1528917892.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:53.288Z,1528917893.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:53.674Z,1528917893.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:54.091Z,1528917894.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:54.481Z,1528917894.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:54.891Z,1528917894.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:55.310Z,1528917895.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:55.688Z,1528917895.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:56.072Z,1528917896.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:56.464Z,1528917896.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:56.858Z,1528917896.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:57.280Z,1528917897.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:57.688Z,1528917897.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:58.067Z,1528917898.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:58.475Z,1528917898.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:58.884Z,1528917898.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:59.291Z,1528917899.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:24:59.690Z,1528917899.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:00.099Z,1528917900.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:00.464Z,1528917900.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:00.868Z,1528917900.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:01.313Z,1528917901.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:01.680Z,1528917901.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:02.088Z,1528917902.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:02.456Z,1528917902.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:02.863Z,1528917902.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:03.306Z,1528917903.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:03.705Z,1528917903.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:04.068Z,1528917904.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:04.464Z,1528917904.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:04.861Z,1528917904.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:05.276Z,1528917905.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:05.680Z,1528917905.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:06.089Z,1528917906.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:06.484Z,1528917906.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:06.870Z,1528917906.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:07.303Z,1528917907.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:07.659Z,1528917907.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:08.083Z,1528917908.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:08.462Z,1528917908.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:08.869Z,1528917908.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:09.295Z,1528917909.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:09.672Z,1528917909.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:10.103Z,1528917910.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:10.479Z,1528917910.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:10.878Z,1528917910.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:11.281Z,1528917911.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:11.687Z,1528917911.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:12.090Z,1528917912.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:12.482Z,1528917912.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:12.884Z,1528917912.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:13.296Z,1528917913.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:13.691Z,1528917913.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:14.076Z,1528917914.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:14.463Z,1528917914.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:14.865Z,1528917914.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:15.284Z,1528917915.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:15.691Z,1528917915.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:16.068Z,1528917916.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:16.485Z,1528917916.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:16.871Z,1528917916.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:17.285Z,1528917917.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:17.659Z,1528917917.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:18.102Z,1528917918.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:18.478Z,1528917918.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:18.866Z,1528917918.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:19.282Z,1528917919.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:19.715Z,1528917919.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:20.079Z,1528917920.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:20.476Z,1528917920.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:20.876Z,1528917920.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:21.303Z,1528917921.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:21.689Z,1528917921.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:22.092Z,1528917922.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:22.467Z,1528917922.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:22.868Z,1528917922.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:23.283Z,1528917923.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:23.674Z,1528917923.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:24.116Z,1528917924.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:24.492Z,1528917924.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:24.882Z,1528917924.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:25.282Z,1528917925.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:25.664Z,1528917925.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:26.092Z,1528917926.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:26.468Z,1528917926.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:26.861Z,1528917926.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:27.301Z,1528917927.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:27.705Z,1528917927.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:28.075Z,1528917928.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:28.471Z,1528917928.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:28.877Z,1528917928.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:29.255Z,1528917929.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:29.676Z,1528917929.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:30.077Z,1528917930.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:30.471Z,1528917930.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:30.880Z,1528917930.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:31.286Z,1528917931.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:31.695Z,1528917931.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:32.085Z,1528917932.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:32.480Z,1528917932.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:32.882Z,1528917932.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:33.298Z,1528917933.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:39.614Z,1528917939.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:39.816Z,1528917939.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:40.223Z,1528917940.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:40.662Z,1528917940.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:41.032Z,1528917941.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:41.408Z,1528917941.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:41.850Z,1528917941.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:42.233Z,1528917942.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:42.653Z,1528917942.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:43.046Z,1528917943.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:43.431Z,1528917943.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:43.822Z,1528917943.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:44.267Z,1528917944.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:44.625Z,1528917944.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:45.010Z,1528917945.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:45.414Z,1528917945.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:45.846Z,1528917945.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:46.246Z,1528917946.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:46.619Z,1528917946.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:47.012Z,1528917947.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:47.431Z,1528917947.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:47.863Z,1528917947.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:48.208Z,1528917948.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:48.635Z,1528917948.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:49.061Z,1528917949.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:49.427Z,1528917949.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:49.838Z,1528917949.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:50.221Z,1528917950.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:50.633Z,1528917950.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:51.035Z,1528917951.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:51.483Z,1528917951.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:51.836Z,1528917951.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:52.237Z,1528917952.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:52.645Z,1528917952.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:53.032Z,1528917953.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:53.430Z,1528917953.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:53.870Z,1528917953.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:54.238Z,1528917954.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:54.639Z,1528917954.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:55.045Z,1528917955.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:55.457Z,1528917955.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:55.816Z,1528917955.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:56.239Z,1528917956.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:56.611Z,1528917956.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:57.016Z,1528917957.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:57.467Z,1528917957.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:57.822Z,1528917957.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:58.226Z,1528917958.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:58.608Z,1528917958.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:59.012Z,1528917959.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:59.392Z,1528917959.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:25:59.822Z,1528917959.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:00.233Z,1528917960.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:00.645Z,1528917960.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:01.056Z,1528917961.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:01.423Z,1528917961.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:01.844Z,1528917961.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:02.243Z,1528917962.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:02.624Z,1528917962.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:03.037Z,1528917963.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:03.446Z,1528917963.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:03.834Z,1528917963.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:04.243Z,1528917964.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:04.671Z,1528917964.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:05.010Z,1528917965.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:05.443Z,1528917965.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:05.801Z,1528917965.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:06.220Z,1528917966.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:06.610Z,1528917966.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:07.075Z,1528917967.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:07.457Z,1528917967.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:07.816Z,1528917967.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:08.215Z,1528917968.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:08.608Z,1528917968.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:09.010Z,1528917969.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:09.415Z,1528917969.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:09.853Z,1528917969.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:10.223Z,1528917970.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:10.661Z,1528917970.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:11.026Z,1528917971.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:11.412Z,1528917971.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:11.852Z,1528917971.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:12.209Z,1528917972.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:12.644Z,1528917972.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:13.021Z,1528917973.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:13.423Z,1528917973.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:13.811Z,1528917973.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:14.270Z,1528917974.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:14.622Z,1528917974.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:15.023Z,1528917975.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:15.420Z,1528917975.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:15.832Z,1528917975.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:16.226Z,1528917976.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:16.631Z,1528917976.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:17.006Z,1528917977.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:17.411Z,1528917977.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:17.816Z,1528917977.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:18.215Z,1528917978.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:18.636Z,1528917978.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:19.019Z,1528917979.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:19.432Z,1528917979.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:19.827Z,1528917979.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:20.231Z,1528917980.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:20.610Z,1528917980.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:21.041Z,1528917981.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:21.438Z,1528917981.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:21.823Z,1528917981.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:22.248Z,1528917982.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:22.622Z,1528917982.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:23.019Z,1528917983.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:23.410Z,1528917983.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:23.824Z,1528917983.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:24.228Z,1528917984.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:24.631Z,1528917984.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:25.048Z,1528917985.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:25.420Z,1528917985.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:25.810Z,1528917985.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:26.260Z,1528917986.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:26.614Z,1528917986.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:27.015Z,1528917987.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:27.423Z,1528917987.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:27.826Z,1528917987.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:28.219Z,1528917988.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:28.603Z,1528917988.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:29.035Z,1528917989.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:29.406Z,1528917989.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:29.812Z,1528917989.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:30.234Z,1528917990.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:30.615Z,1528917990.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:31.027Z,1528917991.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:31.429Z,1528917991.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:31.835Z,1528917991.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:32.235Z,1528917992.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:32.631Z,1528917992.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:33.008Z,1528917993.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:33.458Z,1528917993.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:39.694Z,1528917999.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:39.694Z,1528917999.694 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 319
2018-06-13T19:26:39.694Z,1528917999.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:26:39.701Z,1528917999.701 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:39.701Z,1528917999.701 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 319
2018-06-13T19:26:39.701Z,1528917999.701 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:26:39.703Z,1528917999.703 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:39.703Z,1528917999.703 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 319
2018-06-13T19:26:39.703Z,1528917999.703 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:26:39.793Z,1528917999.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:26:39.793Z,1528917999.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:26:39.794Z,1528917999.794 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:26:39.985Z,1528917999.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:26:39.985Z,1528917999.985 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 319
2018-06-13T19:26:39.986Z,1528917999.986 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:26:39.986Z,1528917999.986 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 319
2018-06-13T19:26:39.986Z,1528917999.986 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:26:39.986Z,1528917999.986 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 319
2018-06-13T19:26:40.269Z,1528918000.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:26:40.269Z,1528918000.269 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:26:40.269Z,1528918000.269 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:26:40.270Z,1528918000.270 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:26:40.270Z,1528918000.270 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:26:40.271Z,1528918000.271 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:26:40.271Z,1528918000.271 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:26:40.271Z,1528918000.271 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:26:40.272Z,1528918000.272 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:26:40.668Z,1528918000.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T19:26:40.673Z,1528918000.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:41.068Z,1528918001.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T19:26:41.073Z,1528918001.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:41.476Z,1528918001.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T19:26:41.481Z,1528918001.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:41.891Z,1528918001.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T19:26:41.892Z,1528918001.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:42.287Z,1528918002.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T19:26:42.288Z,1528918002.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:42.687Z,1528918002.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T19:26:42.688Z,1528918002.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:43.052Z,1528918003.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T19:26:43.057Z,1528918003.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:43.466Z,1528918003.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T19:26:43.467Z,1528918003.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:43.912Z,1528918003.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T19:26:43.917Z,1528918003.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:44.269Z,1528918004.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T19:26:44.270Z,1528918004.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:44.695Z,1528918004.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T19:26:44.696Z,1528918004.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:45.099Z,1528918005.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T19:26:45.099Z,1528918005.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:45.476Z,1528918005.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T19:26:45.482Z,1528918005.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:45.895Z,1528918005.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T19:26:45.896Z,1528918005.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:46.258Z,1528918006.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T19:26:46.259Z,1528918006.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:46.648Z,1528918006.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T19:26:46.650Z,1528918006.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:47.059Z,1528918007.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T19:26:47.060Z,1528918007.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:47.519Z,1528918007.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T19:26:47.520Z,1528918007.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:47.858Z,1528918007.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T19:26:47.859Z,1528918007.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:48.268Z,1528918008.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T19:26:48.269Z,1528918008.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:48.671Z,1528918008.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T19:26:48.672Z,1528918008.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:49.069Z,1528918009.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T19:26:49.077Z,1528918009.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:49.470Z,1528918009.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T19:26:49.471Z,1528918009.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:49.876Z,1528918009.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T19:26:49.882Z,1528918009.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:50.279Z,1528918010.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T19:26:50.280Z,1528918010.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:50.698Z,1528918010.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T19:26:50.699Z,1528918010.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:51.101Z,1528918011.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T19:26:51.102Z,1528918011.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:51.468Z,1528918011.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-06-13T19:26:51.473Z,1528918011.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:51.863Z,1528918011.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T19:26:51.864Z,1528918011.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:52.268Z,1528918012.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T19:26:52.290Z,1528918012.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:52.664Z,1528918012.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T19:26:52.673Z,1528918012.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:53.072Z,1528918013.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T19:26:53.082Z,1528918013.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:53.483Z,1528918013.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T19:26:53.484Z,1528918013.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:53.878Z,1528918013.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T19:26:53.879Z,1528918013.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:54.274Z,1528918014.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T19:26:54.275Z,1528918014.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:54.684Z,1528918014.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T19:26:54.693Z,1528918014.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:55.058Z,1528918015.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T19:26:55.059Z,1528918015.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:55.480Z,1528918015.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T19:26:55.485Z,1528918015.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:55.890Z,1528918015.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T19:26:55.890Z,1528918015.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:56.276Z,1528918016.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T19:26:56.282Z,1528918016.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:56.704Z,1528918016.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T19:26:56.729Z,1528918016.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:57.100Z,1528918017.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T19:26:57.105Z,1528918017.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:57.496Z,1528918017.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T19:26:57.502Z,1528918017.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:57.892Z,1528918017.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T19:26:57.901Z,1528918017.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:58.272Z,1528918018.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T19:26:58.274Z,1528918018.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:58.669Z,1528918018.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T19:26:58.670Z,1528918018.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:59.081Z,1528918019.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T19:26:59.082Z,1528918019.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:59.515Z,1528918019.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T19:26:59.516Z,1528918019.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:26:59.863Z,1528918019.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:00.276Z,1528918020.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:00.676Z,1528918020.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:01.068Z,1528918021.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:01.477Z,1528918021.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:01.892Z,1528918021.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:02.260Z,1528918022.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:02.659Z,1528918022.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:03.074Z,1528918023.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:03.468Z,1528918023.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:03.902Z,1528918023.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:04.333Z,1528918024.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:04.660Z,1528918024.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:05.076Z,1528918025.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:05.537Z,1528918025.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:05.877Z,1528918025.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:06.285Z,1528918026.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:06.702Z,1528918026.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:07.095Z,1528918027.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:07.468Z,1528918027.468 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T19:27:07.468Z,1528918027.468 [BPC1] Communications Fault, FailCount= 4
2018-06-13T19:27:07.468Z,1528918027.468 [BPC1](ERROR): Communications Fault
2018-06-13T19:27:07.486Z,1528918027.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:07.567Z,1528918027.567 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T19:27:07.913Z,1528918027.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:08.313Z,1528918028.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:08.660Z,1528918028.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:08.761Z,1528918028.761 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T19:27:08.761Z,1528918028.761 [BPC1] No Fault, FailCount= 4
2018-06-13T19:27:09.166Z,1528918029.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:09.468Z,1528918029.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:09.866Z,1528918029.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:10.318Z,1528918030.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:10.670Z,1528918030.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:11.068Z,1528918031.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:11.506Z,1528918031.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:11.882Z,1528918031.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:12.269Z,1528918032.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:12.706Z,1528918032.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:13.070Z,1528918033.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:13.480Z,1528918033.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:13.925Z,1528918033.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:14.272Z,1528918034.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:14.699Z,1528918034.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:15.078Z,1528918035.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:15.514Z,1528918035.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:15.876Z,1528918035.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:16.279Z,1528918036.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:16.672Z,1528918036.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:17.055Z,1528918037.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:17.511Z,1528918037.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:17.883Z,1528918037.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:18.292Z,1528918038.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:18.702Z,1528918038.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:19.074Z,1528918039.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:19.481Z,1528918039.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:19.893Z,1528918039.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:20.295Z,1528918040.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:20.679Z,1528918040.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:21.066Z,1528918041.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:21.490Z,1528918041.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:21.892Z,1528918041.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:22.293Z,1528918042.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:22.665Z,1528918042.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:23.055Z,1528918043.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:23.475Z,1528918043.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:23.873Z,1528918043.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:24.267Z,1528918044.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:24.676Z,1528918044.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:25.064Z,1528918045.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:25.472Z,1528918045.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:25.863Z,1528918045.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:26.313Z,1528918046.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:26.663Z,1528918046.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:27.074Z,1528918047.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:27.506Z,1528918047.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:27.919Z,1528918047.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:28.314Z,1528918048.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:28.674Z,1528918048.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:29.073Z,1528918049.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:29.518Z,1528918049.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:29.870Z,1528918049.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:30.279Z,1528918050.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:30.704Z,1528918050.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:31.075Z,1528918051.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:31.497Z,1528918051.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:31.904Z,1528918051.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:32.267Z,1528918052.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:39.016Z,1528918059.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:39.215Z,1528918059.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:39.614Z,1528918059.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:40.024Z,1528918060.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:40.423Z,1528918060.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:40.816Z,1528918060.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:41.231Z,1528918061.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:41.639Z,1528918061.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:42.010Z,1528918062.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:42.421Z,1528918062.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:42.822Z,1528918062.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:43.235Z,1528918063.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:43.639Z,1528918063.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:44.026Z,1528918064.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:44.433Z,1528918064.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:44.840Z,1528918064.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:45.204Z,1528918065.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:45.613Z,1528918065.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:46.042Z,1528918066.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:46.421Z,1528918066.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:46.819Z,1528918066.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:47.218Z,1528918067.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:47.630Z,1528918067.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:48.026Z,1528918068.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:48.401Z,1528918068.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:48.815Z,1528918068.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:49.260Z,1528918069.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:49.616Z,1528918069.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:50.023Z,1528918070.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:50.392Z,1528918070.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:50.832Z,1528918070.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:51.229Z,1528918071.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:51.625Z,1528918071.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:52.012Z,1528918072.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:52.420Z,1528918072.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:52.816Z,1528918072.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:53.225Z,1528918073.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:53.624Z,1528918073.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:54.010Z,1528918074.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:54.420Z,1528918074.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:54.829Z,1528918074.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:55.226Z,1528918075.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:55.604Z,1528918075.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:56.020Z,1528918076.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:56.418Z,1528918076.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:56.818Z,1528918076.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:57.222Z,1528918077.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:57.622Z,1528918077.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:58.036Z,1528918078.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:58.412Z,1528918078.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:58.812Z,1528918078.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:59.207Z,1528918079.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:27:59.608Z,1528918079.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:00.014Z,1528918080.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:00.386Z,1528918080.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:00.817Z,1528918080.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:01.262Z,1528918081.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:01.619Z,1528918081.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:01.985Z,1528918081.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:02.424Z,1528918082.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:02.825Z,1528918082.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:03.208Z,1528918083.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:03.619Z,1528918083.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:04.047Z,1528918084.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:04.417Z,1528918084.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:04.816Z,1528918084.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:05.218Z,1528918085.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:05.620Z,1528918085.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:06.016Z,1528918086.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:06.424Z,1528918086.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:06.823Z,1528918086.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:07.232Z,1528918087.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:07.635Z,1528918087.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:08.023Z,1528918088.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:08.396Z,1528918088.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:08.838Z,1528918088.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:09.200Z,1528918089.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:09.634Z,1528918089.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:10.052Z,1528918090.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:10.437Z,1528918090.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:10.810Z,1528918090.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:11.246Z,1528918091.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:11.633Z,1528918091.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:12.018Z,1528918092.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:12.416Z,1528918092.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:12.825Z,1528918092.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:13.227Z,1528918093.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:13.620Z,1528918093.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:14.026Z,1528918094.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:14.432Z,1528918094.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:14.837Z,1528918094.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:15.192Z,1528918095.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:15.648Z,1528918095.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:16.016Z,1528918096.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:16.421Z,1528918096.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:16.830Z,1528918096.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:17.215Z,1528918097.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:17.600Z,1528918097.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:17.994Z,1528918097.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:18.400Z,1528918098.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:18.811Z,1528918098.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:19.215Z,1528918099.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:19.632Z,1528918099.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:20.026Z,1528918100.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:20.427Z,1528918100.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:20.831Z,1528918100.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:21.231Z,1528918101.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:21.643Z,1528918101.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:22.028Z,1528918102.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:22.422Z,1528918102.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:22.800Z,1528918102.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:23.230Z,1528918103.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:23.611Z,1528918103.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:24.007Z,1528918104.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:24.414Z,1528918104.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:24.819Z,1528918104.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:25.231Z,1528918105.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:25.632Z,1528918105.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:26.014Z,1528918106.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:26.419Z,1528918106.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:26.839Z,1528918106.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:27.204Z,1528918107.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:27.644Z,1528918107.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:28.015Z,1528918108.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:28.420Z,1528918108.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:28.820Z,1528918108.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:29.259Z,1528918109.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:29.631Z,1528918109.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:30.024Z,1528918110.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:30.428Z,1528918110.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:30.830Z,1528918110.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:31.244Z,1528918111.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:31.666Z,1528918111.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:31.682Z,1528918111.682 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T19:28:31.682Z,1528918111.682 [Default:CheckIn:C.Wait] Stopped
2018-06-13T19:28:31.682Z,1528918111.682 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T19:28:31.682Z,1528918111.682 [Default:CheckIn:D] Running Loop=1
2018-06-13T19:28:32.007Z,1528918112.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:32.030Z,1528918112.030 [Default:CheckIn:D] Stopped
2018-06-13T19:28:32.030Z,1528918112.030 [Default:CheckIn:E] Running Loop=1
2018-06-13T19:28:32.413Z,1528918112.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:32.437Z,1528918112.437 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 961.309766 min 
2018-06-13T19:28:32.437Z,1528918112.437 [Default:CheckIn:E] Stopped
2018-06-13T19:28:32.437Z,1528918112.437 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T19:28:32.437Z,1528918112.437 [Default:CheckIn] Stopped
2018-06-13T19:28:32.438Z,1528918112.438 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T19:28:32.438Z,1528918112.438 [Default:CheckIn](INFO): Running loop #93
2018-06-13T19:28:32.438Z,1528918112.438 [Default:CheckIn] Running Loop=93
2018-06-13T19:28:32.438Z,1528918112.438 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T19:28:32.438Z,1528918112.438 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T19:28:32.850Z,1528918112.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:33.208Z,1528918113.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:33.620Z,1528918113.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:39.711Z,1528918119.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:39.916Z,1528918119.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:40.313Z,1528918120.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:40.734Z,1528918120.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:41.088Z,1528918121.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:41.497Z,1528918121.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:41.930Z,1528918121.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:42.351Z,1528918122.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:42.744Z,1528918122.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:43.107Z,1528918123.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:43.494Z,1528918123.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:43.889Z,1528918123.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:44.324Z,1528918124.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:44.728Z,1528918124.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:45.128Z,1528918125.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:45.514Z,1528918125.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:45.899Z,1528918125.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:46.310Z,1528918126.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:46.740Z,1528918126.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:47.094Z,1528918127.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:47.505Z,1528918127.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:47.907Z,1528918127.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:48.315Z,1528918128.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:48.698Z,1528918128.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:49.130Z,1528918129.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:49.521Z,1528918129.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:49.887Z,1528918129.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:50.297Z,1528918130.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:50.738Z,1528918130.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:51.137Z,1528918131.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:51.512Z,1528918131.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:51.902Z,1528918131.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:52.316Z,1528918132.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:52.725Z,1528918132.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:53.087Z,1528918133.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:53.506Z,1528918133.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:53.935Z,1528918133.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:54.338Z,1528918134.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:54.723Z,1528918134.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:55.103Z,1528918135.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:55.515Z,1528918135.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:55.916Z,1528918135.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:56.312Z,1528918136.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:56.688Z,1528918136.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:57.118Z,1528918137.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:57.533Z,1528918137.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:57.903Z,1528918137.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:58.304Z,1528918138.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:58.746Z,1528918138.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:59.104Z,1528918139.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:59.504Z,1528918139.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:28:59.918Z,1528918139.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:00.309Z,1528918140.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:00.722Z,1528918140.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:01.127Z,1528918141.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:01.493Z,1528918141.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:01.895Z,1528918141.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:02.300Z,1528918142.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:02.715Z,1528918142.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:03.116Z,1528918143.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:03.514Z,1528918143.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:03.921Z,1528918143.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:04.280Z,1528918144.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:04.692Z,1528918144.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:05.089Z,1528918145.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:05.531Z,1528918145.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:05.896Z,1528918145.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:06.306Z,1528918146.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:06.710Z,1528918146.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:07.107Z,1528918147.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:07.504Z,1528918147.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:07.920Z,1528918147.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:08.280Z,1528918148.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:08.715Z,1528918148.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:09.118Z,1528918149.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:09.492Z,1528918149.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:09.916Z,1528918149.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:10.292Z,1528918150.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:10.691Z,1528918150.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:11.084Z,1528918151.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:11.493Z,1528918151.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:11.936Z,1528918151.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:12.326Z,1528918152.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:12.704Z,1528918152.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:13.110Z,1528918153.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:13.488Z,1528918153.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:13.912Z,1528918153.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:14.329Z,1528918154.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:14.712Z,1528918154.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:15.100Z,1528918155.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:15.504Z,1528918155.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:15.895Z,1528918155.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:16.286Z,1528918156.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:16.699Z,1528918156.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:17.096Z,1528918157.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:17.498Z,1528918157.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:17.899Z,1528918157.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:18.295Z,1528918158.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:18.696Z,1528918158.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:19.105Z,1528918159.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:19.491Z,1528918159.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:19.898Z,1528918159.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:20.292Z,1528918160.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:20.705Z,1528918160.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:21.113Z,1528918161.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:21.508Z,1528918161.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:21.915Z,1528918161.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:22.290Z,1528918162.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:22.736Z,1528918162.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:23.145Z,1528918163.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:23.493Z,1528918163.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:23.906Z,1528918163.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:24.307Z,1528918164.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:24.758Z,1528918164.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:25.113Z,1528918165.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:25.513Z,1528918165.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:25.912Z,1528918165.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:26.284Z,1528918166.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:26.730Z,1528918166.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:27.132Z,1528918167.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:27.534Z,1528918167.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:27.922Z,1528918167.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:28.300Z,1528918168.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:28.703Z,1528918168.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:29.091Z,1528918169.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:29.504Z,1528918169.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:29.914Z,1528918169.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:30.351Z,1528918170.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:30.707Z,1528918170.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:31.108Z,1528918171.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:31.508Z,1528918171.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:31.916Z,1528918171.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:32.335Z,1528918172.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:32.719Z,1528918172.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:33.112Z,1528918173.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:33.540Z,1528918173.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:33.892Z,1528918173.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:40.097Z,1528918180.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:40.312Z,1528918180.312 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:40.336Z,1528918180.336 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 320
2018-06-13T19:29:40.336Z,1528918180.336 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:29:40.343Z,1528918180.343 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:40.343Z,1528918180.343 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 320
2018-06-13T19:29:40.343Z,1528918180.343 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:29:40.349Z,1528918180.349 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:40.349Z,1528918180.349 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 320
2018-06-13T19:29:40.349Z,1528918180.349 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:29:40.457Z,1528918180.457 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:29:40.457Z,1528918180.457 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:29:40.458Z,1528918180.458 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:29:40.765Z,1528918180.765 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:29:40.765Z,1528918180.765 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 320
2018-06-13T19:29:40.766Z,1528918180.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:29:40.766Z,1528918180.766 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 320
2018-06-13T19:29:40.767Z,1528918180.767 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:29:40.767Z,1528918180.767 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 320
2018-06-13T19:29:41.078Z,1528918181.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:29:41.078Z,1528918181.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:29:41.079Z,1528918181.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:29:41.079Z,1528918181.079 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:29:41.079Z,1528918181.079 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:29:41.080Z,1528918181.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:29:41.080Z,1528918181.080 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:29:41.105Z,1528918181.105 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:29:41.105Z,1528918181.105 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:29:41.467Z,1528918181.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:29:41.468Z,1528918181.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:41.863Z,1528918181.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:29:41.864Z,1528918181.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:42.263Z,1528918182.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:29:42.264Z,1528918182.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:42.670Z,1528918182.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:29:42.671Z,1528918182.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:43.108Z,1528918183.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T19:29:43.114Z,1528918183.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:43.468Z,1528918183.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T19:29:43.473Z,1528918183.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:43.877Z,1528918183.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:29:43.878Z,1528918183.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:44.271Z,1528918184.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T19:29:44.272Z,1528918184.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:44.671Z,1528918184.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T19:29:44.672Z,1528918184.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:45.078Z,1528918185.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T19:29:45.078Z,1528918185.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:45.486Z,1528918185.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T19:29:45.487Z,1528918185.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:45.860Z,1528918185.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T19:29:45.882Z,1528918185.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:46.274Z,1528918186.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T19:29:46.275Z,1528918186.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:46.676Z,1528918186.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T19:29:46.697Z,1528918186.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:47.080Z,1528918187.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T19:29:47.086Z,1528918187.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:47.478Z,1528918187.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T19:29:47.479Z,1528918187.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:47.874Z,1528918187.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T19:29:47.875Z,1528918187.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:48.278Z,1528918188.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T19:29:48.279Z,1528918188.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:48.680Z,1528918188.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T19:29:48.689Z,1528918188.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:49.065Z,1528918189.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T19:29:49.066Z,1528918189.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:49.472Z,1528918189.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T19:29:49.478Z,1528918189.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:49.872Z,1528918189.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T19:29:49.877Z,1528918189.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:50.274Z,1528918190.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T19:29:50.274Z,1528918190.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:50.667Z,1528918190.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T19:29:50.667Z,1528918190.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:51.083Z,1528918191.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T19:29:51.084Z,1528918191.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:51.472Z,1528918191.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T19:29:51.481Z,1528918191.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:51.897Z,1528918191.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T19:29:51.899Z,1528918191.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:52.307Z,1528918192.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T19:29:52.308Z,1528918192.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:52.703Z,1528918192.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T19:29:52.703Z,1528918192.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:53.068Z,1528918193.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T19:29:53.073Z,1528918193.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:53.460Z,1528918193.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-06-13T19:29:53.465Z,1528918193.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:53.878Z,1528918193.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:29:53.879Z,1528918193.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:54.266Z,1528918194.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:29:54.267Z,1528918194.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:54.687Z,1528918194.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T19:29:54.688Z,1528918194.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:55.087Z,1528918195.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:29:55.088Z,1528918195.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:55.493Z,1528918195.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:29:55.494Z,1528918195.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:55.867Z,1528918195.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:29:55.868Z,1528918195.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:56.263Z,1528918196.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:29:56.264Z,1528918196.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:56.670Z,1528918196.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:29:56.671Z,1528918196.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:57.075Z,1528918197.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T19:29:57.076Z,1528918197.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:57.516Z,1528918197.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T19:29:57.521Z,1528918197.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:57.889Z,1528918197.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:29:57.890Z,1528918197.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:58.276Z,1528918198.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T19:29:58.282Z,1528918198.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:58.675Z,1528918198.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T19:29:58.676Z,1528918198.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:59.059Z,1528918199.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T19:29:59.085Z,1528918199.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:59.493Z,1528918199.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T19:29:59.494Z,1528918199.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:29:59.887Z,1528918199.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T19:29:59.888Z,1528918199.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:00.316Z,1528918200.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:00.668Z,1528918200.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:01.069Z,1528918201.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:01.475Z,1528918201.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:01.871Z,1528918201.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:02.252Z,1528918202.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:02.679Z,1528918202.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:03.080Z,1528918203.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:03.491Z,1528918203.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:03.872Z,1528918203.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:04.288Z,1528918204.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:04.657Z,1528918204.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:05.057Z,1528918205.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:05.466Z,1528918205.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:05.867Z,1528918205.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:06.280Z,1528918206.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:06.680Z,1528918206.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:07.078Z,1528918207.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:07.463Z,1528918207.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:07.868Z,1528918207.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:08.289Z,1528918208.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:08.678Z,1528918208.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:09.078Z,1528918209.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:09.481Z,1528918209.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:09.926Z,1528918209.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:10.290Z,1528918210.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:10.681Z,1528918210.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:11.099Z,1528918211.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:11.463Z,1528918211.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:11.904Z,1528918211.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:12.292Z,1528918212.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:12.694Z,1528918212.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:13.064Z,1528918213.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:13.494Z,1528918213.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:13.874Z,1528918213.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:14.252Z,1528918214.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:14.696Z,1528918214.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:15.075Z,1528918215.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:15.476Z,1528918215.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:15.920Z,1528918215.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:16.271Z,1528918216.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:16.678Z,1528918216.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:17.104Z,1528918217.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:17.490Z,1528918217.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:17.894Z,1528918217.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:18.314Z,1528918218.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:18.694Z,1528918218.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:19.097Z,1528918219.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:19.507Z,1528918219.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:19.892Z,1528918219.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:20.273Z,1528918220.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:20.717Z,1528918220.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:21.093Z,1528918221.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:21.522Z,1528918221.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:21.886Z,1528918221.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:22.292Z,1528918222.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:22.679Z,1528918222.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:23.096Z,1528918223.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:23.482Z,1528918223.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:23.902Z,1528918223.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:24.297Z,1528918224.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:24.695Z,1528918224.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:25.105Z,1528918225.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:25.483Z,1528918225.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:25.876Z,1528918225.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:26.274Z,1528918226.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:26.700Z,1528918226.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:27.082Z,1528918227.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:27.489Z,1528918227.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:27.928Z,1528918227.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:28.263Z,1528918228.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:28.660Z,1528918228.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:29.097Z,1528918229.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:29.472Z,1528918229.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:29.872Z,1528918229.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:30.311Z,1528918230.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:30.690Z,1528918230.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:31.079Z,1528918231.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:31.491Z,1528918231.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:31.860Z,1528918231.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:32.291Z,1528918232.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:32.672Z,1528918232.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:33.075Z,1528918233.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:33.474Z,1528918233.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:33.879Z,1528918233.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:34.271Z,1528918234.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:41.033Z,1528918241.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:41.253Z,1528918241.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:41.657Z,1528918241.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:42.067Z,1528918242.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:42.427Z,1528918242.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:42.816Z,1528918242.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:43.229Z,1528918243.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:43.632Z,1528918243.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:44.034Z,1528918244.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:44.441Z,1528918244.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:44.826Z,1528918244.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:45.215Z,1528918245.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:45.615Z,1528918245.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:46.031Z,1528918246.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:46.423Z,1528918246.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:46.875Z,1528918246.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:47.248Z,1528918247.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:47.636Z,1528918247.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:48.037Z,1528918248.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:48.404Z,1528918248.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:48.841Z,1528918248.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:49.224Z,1528918249.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:49.624Z,1528918249.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:50.023Z,1528918250.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:50.431Z,1528918250.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:50.818Z,1528918250.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:51.250Z,1528918251.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:51.638Z,1528918251.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:52.033Z,1528918252.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:52.434Z,1528918252.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:52.827Z,1528918252.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:53.232Z,1528918253.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:53.624Z,1528918253.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:54.036Z,1528918254.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:54.404Z,1528918254.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:54.832Z,1528918254.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:55.242Z,1528918255.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:55.635Z,1528918255.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:56.020Z,1528918256.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:56.416Z,1528918256.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:56.845Z,1528918256.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:57.236Z,1528918257.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:57.624Z,1528918257.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:58.020Z,1528918258.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:58.424Z,1528918258.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:58.841Z,1528918258.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:59.210Z,1528918259.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:30:59.635Z,1528918259.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:00.028Z,1528918260.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:00.402Z,1528918260.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:00.827Z,1528918260.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:01.244Z,1528918261.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:01.626Z,1528918261.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:02.002Z,1528918262.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:02.412Z,1528918262.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:02.826Z,1528918262.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:03.231Z,1528918263.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:03.632Z,1528918263.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:04.029Z,1528918264.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:04.422Z,1528918264.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:04.831Z,1528918264.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:05.232Z,1528918265.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:05.633Z,1528918265.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:06.050Z,1528918266.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:06.417Z,1528918266.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:06.820Z,1528918266.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:07.242Z,1528918267.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:07.630Z,1528918267.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:08.010Z,1528918268.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:08.428Z,1528918268.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:08.822Z,1528918268.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:09.232Z,1528918269.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:09.665Z,1528918269.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:10.019Z,1528918270.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:10.432Z,1528918270.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:10.838Z,1528918270.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:11.245Z,1528918271.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:11.646Z,1528918271.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:12.016Z,1528918272.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:12.435Z,1528918272.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:12.832Z,1528918272.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:13.264Z,1528918273.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:13.630Z,1528918273.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:14.046Z,1528918274.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:14.416Z,1528918274.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:14.852Z,1528918274.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:15.257Z,1528918275.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:15.658Z,1528918275.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:16.033Z,1528918276.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:16.445Z,1528918276.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:16.845Z,1528918276.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:17.240Z,1528918277.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:17.632Z,1528918277.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:18.029Z,1528918278.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:18.420Z,1528918278.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:18.823Z,1528918278.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:19.223Z,1528918279.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:19.637Z,1528918279.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:20.042Z,1528918280.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:20.406Z,1528918280.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:20.835Z,1528918280.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:21.308Z,1528918281.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:21.622Z,1528918281.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:22.024Z,1528918282.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:22.420Z,1528918282.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:22.829Z,1528918282.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:23.227Z,1528918283.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:23.627Z,1528918283.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:24.038Z,1528918284.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:24.433Z,1528918284.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:24.854Z,1528918284.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:25.232Z,1528918285.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:25.625Z,1528918285.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:26.023Z,1528918286.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:26.421Z,1528918286.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:26.862Z,1528918286.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:27.288Z,1528918287.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:27.637Z,1528918287.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:27.994Z,1528918287.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:28.440Z,1528918288.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:28.844Z,1528918288.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:29.246Z,1528918289.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:29.647Z,1528918289.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:30.056Z,1528918290.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:30.409Z,1528918290.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:30.811Z,1528918290.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:31.208Z,1528918291.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:31.604Z,1528918291.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:32.034Z,1528918292.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:32.435Z,1528918292.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:32.832Z,1528918292.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:33.220Z,1528918293.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:33.628Z,1528918293.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:34.030Z,1528918294.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:34.436Z,1528918294.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:41.303Z,1528918301.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:41.510Z,1528918301.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:41.904Z,1528918301.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:42.305Z,1528918302.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:42.676Z,1528918302.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:43.110Z,1528918303.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:43.508Z,1528918303.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:43.888Z,1528918303.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:44.325Z,1528918304.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:44.708Z,1528918304.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:45.087Z,1528918305.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:45.502Z,1528918305.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:45.914Z,1528918305.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:46.315Z,1528918306.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:46.678Z,1528918306.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:47.154Z,1528918307.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:47.516Z,1528918307.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:47.910Z,1528918307.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:48.304Z,1528918308.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:48.703Z,1528918308.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:49.099Z,1528918309.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:49.513Z,1528918309.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:49.902Z,1528918309.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:50.322Z,1528918310.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:50.717Z,1528918310.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:51.102Z,1528918311.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:51.482Z,1528918311.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:51.901Z,1528918311.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:52.351Z,1528918312.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:52.712Z,1528918312.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:53.121Z,1528918313.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:53.484Z,1528918313.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:53.894Z,1528918313.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:54.312Z,1528918314.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:54.714Z,1528918314.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:55.111Z,1528918315.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:55.523Z,1528918315.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:55.903Z,1528918315.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:56.315Z,1528918316.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:56.717Z,1528918316.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:57.078Z,1528918317.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:57.486Z,1528918317.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:57.925Z,1528918317.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:58.296Z,1528918318.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:58.692Z,1528918318.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:59.125Z,1528918319.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:59.484Z,1528918319.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:31:59.901Z,1528918319.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:00.330Z,1528918320.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:00.713Z,1528918320.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:01.077Z,1528918321.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:01.536Z,1528918321.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:01.921Z,1528918321.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:02.319Z,1528918322.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:02.722Z,1528918322.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:03.088Z,1528918323.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:03.487Z,1528918323.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:03.926Z,1528918323.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:04.323Z,1528918324.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:04.733Z,1528918324.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:05.111Z,1528918325.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:05.500Z,1528918325.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:05.922Z,1528918325.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:06.292Z,1528918326.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:06.726Z,1528918326.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:07.086Z,1528918327.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:07.546Z,1528918327.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:07.935Z,1528918327.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:08.285Z,1528918328.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:08.759Z,1528918328.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:09.096Z,1528918329.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:09.476Z,1528918329.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:09.918Z,1528918329.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:10.312Z,1528918330.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:10.745Z,1528918330.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:11.107Z,1528918331.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:11.509Z,1528918331.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:11.896Z,1528918331.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:12.342Z,1528918332.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:12.696Z,1528918332.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:13.105Z,1528918333.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:13.515Z,1528918333.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:13.913Z,1528918333.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:14.321Z,1528918334.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:14.703Z,1528918334.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:15.114Z,1528918335.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:15.514Z,1528918335.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:15.927Z,1528918335.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:16.292Z,1528918336.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:16.706Z,1528918336.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:17.105Z,1528918337.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:17.492Z,1528918337.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:17.900Z,1528918337.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:18.305Z,1528918338.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:18.718Z,1528918338.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:19.121Z,1528918339.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:19.524Z,1528918339.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:19.888Z,1528918339.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:20.298Z,1528918340.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:20.732Z,1528918340.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:21.099Z,1528918341.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:21.498Z,1528918341.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:21.948Z,1528918341.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:22.293Z,1528918342.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:22.691Z,1528918342.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:23.143Z,1528918343.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:23.498Z,1528918343.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:23.909Z,1528918343.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:24.309Z,1528918344.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:24.725Z,1528918344.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:25.092Z,1528918345.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:25.490Z,1528918345.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:25.900Z,1528918345.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:26.277Z,1528918346.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:26.783Z,1528918346.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:27.092Z,1528918347.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:27.508Z,1528918347.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:27.894Z,1528918347.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:28.282Z,1528918348.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:28.687Z,1528918348.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:29.151Z,1528918349.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:29.513Z,1528918349.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:29.879Z,1528918349.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:30.378Z,1528918350.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:30.680Z,1528918350.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:31.150Z,1528918351.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:31.533Z,1528918351.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:31.935Z,1528918351.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:32.287Z,1528918352.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:32.697Z,1528918352.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:33.105Z,1528918353.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:33.514Z,1528918353.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:33.903Z,1528918353.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:34.306Z,1528918354.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:34.692Z,1528918354.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:41.433Z,1528918361.433 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2018-06-13T19:32:41.433Z,1528918361.433 [PNI_TCM] Data Fault, FailCount= 1
2018-06-13T19:32:41.433Z,1528918361.433 [PNI_TCM](ERROR): Data Fault
2018-06-13T19:32:41.494Z,1528918361.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.802675 seconds old.
2018-06-13T19:32:41.495Z,1528918361.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:41.495Z,1528918361.495 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 321
2018-06-13T19:32:41.495Z,1528918361.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:32:41.497Z,1528918361.497 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.799143 seconds old.
2018-06-13T19:32:41.498Z,1528918361.498 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:41.498Z,1528918361.498 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 321
2018-06-13T19:32:41.498Z,1528918361.498 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:32:41.499Z,1528918361.499 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.800634 seconds old.
2018-06-13T19:32:41.500Z,1528918361.500 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:41.500Z,1528918361.500 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 321
2018-06-13T19:32:41.500Z,1528918361.500 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:32:41.601Z,1528918361.601 [CBIT](ERROR): Data Fault in component: PNI_TCM
2018-06-13T19:32:41.601Z,1528918361.601 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:32:41.602Z,1528918361.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:32:41.602Z,1528918361.602 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:32:41.639Z,1528918361.639 [PNI_TCM](INFO): Powering down
2018-06-13T19:32:41.829Z,1528918361.829 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:32:41.829Z,1528918361.829 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 321
2018-06-13T19:32:41.830Z,1528918361.830 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:32:41.830Z,1528918361.830 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 321
2018-06-13T19:32:41.830Z,1528918361.830 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:32:41.830Z,1528918361.830 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 321
2018-06-13T19:32:42.063Z,1528918362.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:32:42.064Z,1528918362.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:32:42.064Z,1528918362.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:32:42.064Z,1528918362.064 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:32:42.089Z,1528918362.089 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:32:42.089Z,1528918362.089 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:32:42.090Z,1528918362.090 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:32:42.090Z,1528918362.090 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:32:42.091Z,1528918362.091 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:32:42.496Z,1528918362.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.804263 seconds old.
2018-06-13T19:32:42.496Z,1528918362.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T19:32:42.497Z,1528918362.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:42.498Z,1528918362.498 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.800803 seconds old.
2018-06-13T19:32:42.499Z,1528918362.499 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.801115 seconds old.
2018-06-13T19:32:42.879Z,1528918362.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.186926 seconds old.
2018-06-13T19:32:42.879Z,1528918362.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T19:32:42.880Z,1528918362.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:42.885Z,1528918362.885 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.187699 seconds old.
2018-06-13T19:32:42.886Z,1528918362.886 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.188141 seconds old.
2018-06-13T19:32:43.011Z,1528918363.011 [CBIT](INFO): Clearing failed state for component PNI_TCM
2018-06-13T19:32:43.011Z,1528918363.011 [PNI_TCM] No Fault, FailCount= 1
2018-06-13T19:32:43.282Z,1528918363.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.589866 seconds old.
2018-06-13T19:32:43.282Z,1528918363.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T19:32:43.283Z,1528918363.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:43.284Z,1528918363.284 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.586339 seconds old.
2018-06-13T19:32:43.285Z,1528918363.285 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.586846 seconds old.
2018-06-13T19:32:43.677Z,1528918363.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.985639 seconds old.
2018-06-13T19:32:43.678Z,1528918363.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T19:32:43.679Z,1528918363.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:43.680Z,1528918363.680 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.982125 seconds old.
2018-06-13T19:32:43.681Z,1528918363.681 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.982444 seconds old.
2018-06-13T19:32:44.082Z,1528918364.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.390653 seconds old.
2018-06-13T19:32:44.083Z,1528918364.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T19:32:44.084Z,1528918364.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:44.089Z,1528918364.089 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.387117 seconds old.
2018-06-13T19:32:44.090Z,1528918364.090 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.391879 seconds old.
2018-06-13T19:32:44.471Z,1528918364.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.779372 seconds old.
2018-06-13T19:32:44.472Z,1528918364.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T19:32:44.472Z,1528918364.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:44.474Z,1528918364.474 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.776055 seconds old.
2018-06-13T19:32:44.475Z,1528918364.475 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.776401 seconds old.
2018-06-13T19:32:44.888Z,1528918364.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.196537 seconds old.
2018-06-13T19:32:44.889Z,1528918364.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T19:32:44.890Z,1528918364.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:44.916Z,1528918364.916 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.218093 seconds old.
2018-06-13T19:32:44.917Z,1528918364.917 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.218522 seconds old.
2018-06-13T19:32:45.285Z,1528918365.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.593501 seconds old.
2018-06-13T19:32:45.286Z,1528918365.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T19:32:45.287Z,1528918365.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:45.288Z,1528918365.288 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.590231 seconds old.
2018-06-13T19:32:45.289Z,1528918365.289 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.590795 seconds old.
2018-06-13T19:32:45.674Z,1528918365.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.982710 seconds old.
2018-06-13T19:32:45.675Z,1528918365.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T19:32:45.676Z,1528918365.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:45.681Z,1528918365.681 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.979200 seconds old.
2018-06-13T19:32:45.682Z,1528918365.682 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.983969 seconds old.
2018-06-13T19:32:46.094Z,1528918366.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.402752 seconds old.
2018-06-13T19:32:46.095Z,1528918366.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T19:32:46.096Z,1528918366.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:46.097Z,1528918366.097 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.399225 seconds old.
2018-06-13T19:32:46.116Z,1528918366.116 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.417628 seconds old.
2018-06-13T19:32:46.495Z,1528918366.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T19:32:46.496Z,1528918366.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:46.918Z,1528918366.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T19:32:46.919Z,1528918366.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:47.315Z,1528918367.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T19:32:47.316Z,1528918367.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:47.670Z,1528918367.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T19:32:47.671Z,1528918367.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:48.113Z,1528918368.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T19:32:48.114Z,1528918368.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:48.492Z,1528918368.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T19:32:48.514Z,1528918368.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:48.890Z,1528918368.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T19:32:48.891Z,1528918368.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:49.307Z,1528918369.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T19:32:49.308Z,1528918369.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:49.711Z,1528918369.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T19:32:49.712Z,1528918369.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:50.068Z,1528918370.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T19:32:50.089Z,1528918370.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:50.470Z,1528918370.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T19:32:50.471Z,1528918370.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:50.858Z,1528918370.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T19:32:50.859Z,1528918370.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:51.261Z,1528918371.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T19:32:51.262Z,1528918371.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:51.704Z,1528918371.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T19:32:51.710Z,1528918371.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:52.120Z,1528918372.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T19:32:52.125Z,1528918372.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:52.473Z,1528918372.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T19:32:52.474Z,1528918372.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:52.883Z,1528918372.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T19:32:52.884Z,1528918372.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:53.291Z,1528918373.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-06-13T19:32:53.292Z,1528918373.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:53.654Z,1528918373.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T19:32:53.655Z,1528918373.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:54.065Z,1528918374.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T19:32:54.066Z,1528918374.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:54.491Z,1528918374.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T19:32:54.492Z,1528918374.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:54.882Z,1528918374.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T19:32:54.883Z,1528918374.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:55.274Z,1528918375.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T19:32:55.275Z,1528918375.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:55.678Z,1528918375.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T19:32:55.679Z,1528918375.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:56.075Z,1528918376.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T19:32:56.076Z,1528918376.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:56.486Z,1528918376.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T19:32:56.487Z,1528918376.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:56.881Z,1528918376.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T19:32:56.882Z,1528918376.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:57.302Z,1528918377.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T19:32:57.302Z,1528918377.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:57.703Z,1528918377.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T19:32:57.713Z,1528918377.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:58.102Z,1528918378.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T19:32:58.103Z,1528918378.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:58.474Z,1528918378.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T19:32:58.475Z,1528918378.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:58.915Z,1528918378.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T19:32:58.921Z,1528918378.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:59.268Z,1528918379.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T19:32:59.274Z,1528918379.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:32:59.672Z,1528918379.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T19:32:59.677Z,1528918379.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:00.081Z,1528918380.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T19:33:00.082Z,1528918380.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:00.520Z,1528918380.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T19:33:00.526Z,1528918380.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:00.883Z,1528918380.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T19:33:00.884Z,1528918380.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:01.268Z,1528918381.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T19:33:01.277Z,1528918381.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:01.707Z,1528918381.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:02.076Z,1528918382.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:02.475Z,1528918382.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:02.859Z,1528918382.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:03.281Z,1528918383.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:03.686Z,1528918383.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:04.080Z,1528918384.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:04.483Z,1528918384.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:04.863Z,1528918384.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:05.285Z,1528918385.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:05.689Z,1528918385.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:06.100Z,1528918386.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:06.476Z,1528918386.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:06.888Z,1528918386.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:07.280Z,1528918387.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:07.690Z,1528918387.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:08.058Z,1528918388.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:08.460Z,1528918388.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:08.868Z,1528918388.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:09.252Z,1528918389.252 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T19:33:09.252Z,1528918389.252 [BPC1] Communications Fault, FailCount= 5
2018-06-13T19:33:09.252Z,1528918389.252 [BPC1](ERROR): Communications Fault
2018-06-13T19:33:09.302Z,1528918389.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:09.394Z,1528918389.394 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T19:33:09.700Z,1528918389.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:10.080Z,1528918390.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:10.475Z,1528918390.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:10.565Z,1528918390.565 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T19:33:10.565Z,1528918390.565 [BPC1] No Fault, FailCount= 5
2018-06-13T19:33:10.970Z,1528918390.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:11.272Z,1528918391.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:11.649Z,1528918391.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:12.086Z,1528918392.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:12.468Z,1528918392.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:12.904Z,1528918392.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:13.316Z,1528918393.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:13.675Z,1528918393.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:14.114Z,1528918394.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:14.464Z,1528918394.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:14.882Z,1528918394.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:15.288Z,1528918395.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:15.680Z,1528918395.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:16.090Z,1528918396.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:16.459Z,1528918396.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:16.894Z,1528918396.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:17.266Z,1528918397.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:17.667Z,1528918397.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:18.091Z,1528918398.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:18.481Z,1528918398.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:18.909Z,1528918398.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:19.275Z,1528918399.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:19.677Z,1528918399.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:20.078Z,1528918400.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:20.456Z,1528918400.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:20.893Z,1528918400.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:21.272Z,1528918401.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:21.669Z,1528918401.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:22.086Z,1528918402.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:22.481Z,1528918402.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:22.884Z,1528918402.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:23.290Z,1528918403.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:23.723Z,1528918403.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:24.105Z,1528918404.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:24.503Z,1528918404.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:24.874Z,1528918404.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:25.314Z,1528918405.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:25.681Z,1528918405.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:26.075Z,1528918406.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:26.479Z,1528918406.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:26.896Z,1528918406.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:27.294Z,1528918407.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:27.697Z,1528918407.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:28.096Z,1528918408.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:28.467Z,1528918408.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:28.865Z,1528918408.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:29.263Z,1528918409.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:29.665Z,1528918409.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:30.088Z,1528918410.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:30.470Z,1528918410.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:30.881Z,1528918410.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:31.274Z,1528918411.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:31.677Z,1528918411.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:32.044Z,1528918412.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:32.476Z,1528918412.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:32.488Z,1528918412.488 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T19:28:32.4Z
2018-06-13T19:33:32.488Z,1528918412.488 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T19:33:32.488Z,1528918412.488 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T19:33:32.889Z,1528918412.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:35.399Z,1528918415.399 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T19:33:35.399Z,1528918415.399 [NAL9602] Data Fault, FailCount= 3
2018-06-13T19:33:35.399Z,1528918415.399 [NAL9602](ERROR): Data Fault
2018-06-13T19:33:35.489Z,1528918415.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:35.581Z,1528918415.581 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T19:33:35.591Z,1528918415.591 [NAL9602](INFO): Powering down
2018-06-13T19:33:35.679Z,1528918415.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:36.046Z,1528918416.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:42.448Z,1528918422.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:42.553Z,1528918422.553 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T19:33:42.553Z,1528918422.553 [NAL9602] No Fault, FailCount= 3
2018-06-13T19:33:42.653Z,1528918422.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:43.051Z,1528918423.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:43.363Z,1528918423.363 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180613T032335/Courier0372.lzma
2018-06-13T19:33:43.465Z,1528918423.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:43.812Z,1528918423.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:44.163Z,1528918424.163 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Courier0372.lzma.bak
2018-06-13T19:33:44.163Z,1528918424.163 [DataOverHttps](INFO): SBD MOMSN=8329808
2018-06-13T19:33:44.282Z,1528918424.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:48.382Z,1528918428.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:48.583Z,1528918428.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:48.979Z,1528918428.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:55.304Z,1528918435.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:55.504Z,1528918435.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:55.912Z,1528918435.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:56.320Z,1528918436.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:56.717Z,1528918436.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:33:57.081Z,1528918437.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:03.504Z,1528918443.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:03.617Z,1528918443.617 [DataOverHttps](INFO): Sending 170 bytes from file Logs/20180613T032335/Express0373.lzma
2018-06-13T19:34:03.700Z,1528918443.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:04.052Z,1528918444.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:04.410Z,1528918444.410 [DataOverHttps](INFO): Moved sent file to Logs/20180613T032335/Express0373.lzma.bak
2018-06-13T19:34:04.410Z,1528918444.410 [DataOverHttps](INFO): SBD MOMSN=8329810
2018-06-13T19:34:04.493Z,1528918444.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:07.591Z,1528918447.591 [NAL9602](INFO): Powering up NAL9602
2018-06-13T19:34:07.671Z,1528918447.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:07.682Z,1528918447.682 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T19:34:07.683Z,1528918447.683 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T19:34:07.683Z,1528918447.683 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T19:34:07.891Z,1528918447.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:14.083Z,1528918454.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:14.311Z,1528918454.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:14.676Z,1528918454.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:15.079Z,1528918455.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:15.482Z,1528918455.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:15.892Z,1528918455.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:16.283Z,1528918456.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:16.689Z,1528918456.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:17.070Z,1528918457.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:17.457Z,1528918457.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:17.876Z,1528918457.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:18.311Z,1528918458.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:18.607Z,1528918458.607 [NAL9602](INFO): NAL9602 initialized
2018-06-13T19:34:18.668Z,1528918458.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:19.074Z,1528918459.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:19.487Z,1528918459.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:19.887Z,1528918459.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:20.293Z,1528918460.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:20.691Z,1528918460.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:21.080Z,1528918461.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:21.501Z,1528918461.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:21.872Z,1528918461.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:22.266Z,1528918462.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:22.675Z,1528918462.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:23.117Z,1528918463.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:23.482Z,1528918463.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:23.870Z,1528918463.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:24.275Z,1528918464.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:24.682Z,1528918464.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:25.060Z,1528918465.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:25.483Z,1528918465.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:25.884Z,1528918465.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:26.289Z,1528918466.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:26.723Z,1528918466.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:27.058Z,1528918467.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:27.540Z,1528918467.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:27.859Z,1528918467.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:28.320Z,1528918468.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:28.679Z,1528918468.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:29.094Z,1528918469.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:29.493Z,1528918469.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:29.887Z,1528918469.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:30.288Z,1528918470.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:30.644Z,1528918470.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:31.051Z,1528918471.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:31.518Z,1528918471.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:31.907Z,1528918471.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:32.289Z,1528918472.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:32.717Z,1528918472.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:33.085Z,1528918473.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:33.495Z,1528918473.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:33.896Z,1528918473.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:34.300Z,1528918474.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:34.672Z,1528918474.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:35.106Z,1528918475.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:35.482Z,1528918475.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:35.884Z,1528918475.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:36.275Z,1528918476.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:36.676Z,1528918476.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:37.056Z,1528918477.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:37.496Z,1528918477.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:37.864Z,1528918477.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:38.291Z,1528918478.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:38.672Z,1528918478.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:39.075Z,1528918479.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:39.456Z,1528918479.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:39.845Z,1528918479.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:40.247Z,1528918480.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:40.688Z,1528918480.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:41.091Z,1528918481.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:41.452Z,1528918481.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:41.844Z,1528918481.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:42.255Z,1528918482.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:42.648Z,1528918482.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:43.056Z,1528918483.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:43.482Z,1528918483.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:43.874Z,1528918483.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:44.268Z,1528918484.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:44.691Z,1528918484.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:45.078Z,1528918485.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:45.513Z,1528918485.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:45.909Z,1528918485.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:46.264Z,1528918486.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:46.685Z,1528918486.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:47.075Z,1528918487.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:47.477Z,1528918487.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:47.861Z,1528918487.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:48.269Z,1528918488.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:48.662Z,1528918488.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:49.081Z,1528918489.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:49.475Z,1528918489.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:49.892Z,1528918489.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:50.278Z,1528918490.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:50.665Z,1528918490.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:51.083Z,1528918491.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:51.456Z,1528918491.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:51.899Z,1528918491.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:52.268Z,1528918492.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:52.727Z,1528918492.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:53.096Z,1528918493.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:53.476Z,1528918493.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:53.877Z,1528918493.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:54.270Z,1528918494.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:54.674Z,1528918494.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:55.048Z,1528918495.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:55.537Z,1528918495.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:55.903Z,1528918495.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:56.271Z,1528918496.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:56.667Z,1528918496.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:57.076Z,1528918497.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:57.451Z,1528918497.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:57.855Z,1528918497.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:58.273Z,1528918498.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:58.663Z,1528918498.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:59.061Z,1528918499.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:59.476Z,1528918499.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:34:59.851Z,1528918499.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:00.283Z,1528918500.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:00.653Z,1528918500.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:01.055Z,1528918501.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:01.468Z,1528918501.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:01.906Z,1528918501.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:02.270Z,1528918502.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:02.674Z,1528918502.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:03.078Z,1528918503.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:03.469Z,1528918503.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:03.880Z,1528918503.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:04.242Z,1528918504.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:04.674Z,1528918504.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:05.088Z,1528918505.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:05.486Z,1528918505.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:05.844Z,1528918505.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:06.299Z,1528918506.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:06.662Z,1528918506.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:07.142Z,1528918507.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:07.481Z,1528918507.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:07.887Z,1528918507.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:08.268Z,1528918508.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:08.666Z,1528918508.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:09.050Z,1528918509.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:09.451Z,1528918509.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:14.898Z,1528918514.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:15.143Z,1528918515.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:15.554Z,1528918515.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:15.888Z,1528918515.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:16.313Z,1528918516.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:16.692Z,1528918516.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:17.121Z,1528918517.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:17.497Z,1528918517.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:17.896Z,1528918517.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:18.296Z,1528918518.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:18.698Z,1528918518.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:19.113Z,1528918519.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:19.503Z,1528918519.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:19.909Z,1528918519.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:20.298Z,1528918520.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:20.703Z,1528918520.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:21.116Z,1528918521.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:21.498Z,1528918521.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:21.898Z,1528918521.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:22.303Z,1528918522.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:22.700Z,1528918522.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:23.091Z,1528918523.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:23.496Z,1528918523.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:23.899Z,1528918523.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:24.324Z,1528918524.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:24.721Z,1528918524.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:25.143Z,1528918525.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:25.492Z,1528918525.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:25.909Z,1528918525.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:26.290Z,1528918526.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:26.701Z,1528918526.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:27.096Z,1528918527.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:27.504Z,1528918527.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:27.901Z,1528918527.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:28.306Z,1528918528.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:28.691Z,1528918528.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:29.115Z,1528918529.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:29.482Z,1528918529.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:29.904Z,1528918529.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:30.317Z,1528918530.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:30.716Z,1528918530.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:31.093Z,1528918531.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:31.503Z,1528918531.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:31.900Z,1528918531.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:32.285Z,1528918532.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:32.694Z,1528918532.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:33.068Z,1528918533.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:33.497Z,1528918533.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:33.927Z,1528918533.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:34.292Z,1528918534.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:34.742Z,1528918534.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:35.110Z,1528918535.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:35.506Z,1528918535.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:35.913Z,1528918535.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:36.314Z,1528918536.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:36.761Z,1528918536.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:37.118Z,1528918537.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:37.532Z,1528918537.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:37.889Z,1528918537.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:38.291Z,1528918538.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:38.684Z,1528918538.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:39.090Z,1528918539.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:39.536Z,1528918539.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:39.947Z,1528918539.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:40.298Z,1528918540.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:40.699Z,1528918540.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:41.139Z,1528918541.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:41.480Z,1528918541.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:41.893Z,1528918541.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:42.302Z,1528918542.302 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:42.302Z,1528918542.302 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 322
2018-06-13T19:35:42.302Z,1528918542.302 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:35:42.304Z,1528918542.304 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:42.304Z,1528918542.304 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 322
2018-06-13T19:35:42.304Z,1528918542.304 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:35:42.306Z,1528918542.306 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:42.306Z,1528918542.306 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 322
2018-06-13T19:35:42.306Z,1528918542.306 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:35:42.421Z,1528918542.421 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:35:42.421Z,1528918542.421 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:35:42.422Z,1528918542.422 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:35:42.835Z,1528918542.835 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:35:42.835Z,1528918542.835 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 322
2018-06-13T19:35:42.836Z,1528918542.836 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:35:42.836Z,1528918542.836 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 322
2018-06-13T19:35:42.837Z,1528918542.837 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:35:42.837Z,1528918542.837 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 322
2018-06-13T19:35:43.092Z,1528918543.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:35:43.113Z,1528918543.113 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:35:43.114Z,1528918543.114 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:35:43.114Z,1528918543.114 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:35:43.114Z,1528918543.114 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:35:43.115Z,1528918543.115 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:35:43.115Z,1528918543.115 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:35:43.115Z,1528918543.115 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:35:43.116Z,1528918543.116 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:35:43.503Z,1528918543.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:35:43.504Z,1528918543.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:43.899Z,1528918543.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:35:43.900Z,1528918543.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:44.292Z,1528918544.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:35:44.301Z,1528918544.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:44.727Z,1528918544.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:35:44.743Z,1528918544.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:45.104Z,1528918545.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T19:35:45.109Z,1528918545.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:45.522Z,1528918545.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T19:35:45.523Z,1528918545.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:45.919Z,1528918545.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:35:45.920Z,1528918545.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:46.305Z,1528918546.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T19:35:46.307Z,1528918546.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:46.708Z,1528918546.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T19:35:46.714Z,1528918546.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:47.099Z,1528918547.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T19:35:47.100Z,1528918547.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:47.488Z,1528918547.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T19:35:47.505Z,1528918547.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:47.891Z,1528918547.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T19:35:47.892Z,1528918547.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:48.338Z,1528918548.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T19:35:48.339Z,1528918548.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:48.702Z,1528918548.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T19:35:48.704Z,1528918548.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:49.104Z,1528918549.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T19:35:49.109Z,1528918549.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:49.520Z,1528918549.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T19:35:49.521Z,1528918549.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:49.907Z,1528918549.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T19:35:49.908Z,1528918549.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:50.279Z,1528918550.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T19:35:50.280Z,1528918550.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:50.680Z,1528918550.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T19:35:50.680Z,1528918550.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:51.121Z,1528918551.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T19:35:51.122Z,1528918551.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:51.523Z,1528918551.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T19:35:51.524Z,1528918551.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:51.947Z,1528918551.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T19:35:51.947Z,1528918551.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:52.304Z,1528918552.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T19:35:52.329Z,1528918552.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:52.681Z,1528918552.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T19:35:52.682Z,1528918552.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:53.093Z,1528918553.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T19:35:53.094Z,1528918553.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:53.495Z,1528918553.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T19:35:53.496Z,1528918553.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:53.895Z,1528918553.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T19:35:53.900Z,1528918553.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:54.319Z,1528918554.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T19:35:54.320Z,1528918554.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:54.694Z,1528918554.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T19:35:54.695Z,1528918554.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:55.207Z,1528918555.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T19:35:55.208Z,1528918555.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:55.529Z,1528918555.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T19:35:55.530Z,1528918555.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:55.951Z,1528918555.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:35:55.952Z,1528918555.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:56.359Z,1528918556.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T19:35:56.360Z,1528918556.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:56.679Z,1528918556.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T19:35:56.680Z,1528918556.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:57.080Z,1528918557.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:35:57.081Z,1528918557.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:57.504Z,1528918557.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:35:57.506Z,1528918557.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:57.918Z,1528918557.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:35:57.919Z,1528918557.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:58.346Z,1528918558.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:35:58.346Z,1528918558.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:58.684Z,1528918558.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:35:58.689Z,1528918558.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:59.116Z,1528918559.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T19:35:59.127Z,1528918559.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:59.488Z,1528918559.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T19:35:59.497Z,1528918559.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:35:59.884Z,1528918559.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:35:59.889Z,1528918559.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:00.289Z,1528918560.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T19:36:00.290Z,1528918560.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:00.720Z,1528918560.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T19:36:00.730Z,1528918560.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:01.094Z,1528918561.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T19:36:01.095Z,1528918561.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:01.512Z,1528918561.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T19:36:01.535Z,1528918561.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:01.881Z,1528918561.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T19:36:01.882Z,1528918561.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:02.302Z,1528918562.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:02.716Z,1528918562.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:03.099Z,1528918563.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:03.515Z,1528918563.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:03.945Z,1528918563.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:04.300Z,1528918564.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:04.673Z,1528918564.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:05.151Z,1528918565.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:05.520Z,1528918565.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:05.885Z,1528918565.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:06.292Z,1528918566.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:06.684Z,1528918566.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:07.109Z,1528918567.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:07.523Z,1528918567.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:07.880Z,1528918567.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:08.284Z,1528918568.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:08.692Z,1528918568.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:09.075Z,1528918569.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:09.507Z,1528918569.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:16.064Z,1528918576.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:16.264Z,1528918576.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:16.640Z,1528918576.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:17.050Z,1528918577.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:17.447Z,1528918577.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:17.856Z,1528918577.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:18.255Z,1528918578.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:18.657Z,1528918578.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:19.032Z,1528918579.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:19.423Z,1528918579.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:19.821Z,1528918579.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:20.241Z,1528918580.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:20.673Z,1528918580.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:21.086Z,1528918581.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:21.432Z,1528918581.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:21.848Z,1528918581.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:22.234Z,1528918582.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:22.634Z,1528918582.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:23.020Z,1528918583.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:23.456Z,1528918583.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:23.865Z,1528918583.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:24.307Z,1528918584.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:24.643Z,1528918584.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:25.056Z,1528918585.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:25.463Z,1528918585.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:25.823Z,1528918585.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:26.233Z,1528918586.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:26.660Z,1528918586.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:27.065Z,1528918587.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:27.456Z,1528918587.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:27.866Z,1528918587.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:28.231Z,1528918588.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:28.637Z,1528918588.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:29.077Z,1528918589.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:29.448Z,1528918589.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:29.858Z,1528918589.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:30.302Z,1528918590.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:30.669Z,1528918590.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:31.038Z,1528918591.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:31.465Z,1528918591.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:31.832Z,1528918591.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:32.245Z,1528918592.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:32.637Z,1528918592.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:33.057Z,1528918593.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:33.445Z,1528918593.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:33.876Z,1528918593.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:34.250Z,1528918594.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:34.655Z,1528918594.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:35.056Z,1528918595.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:35.464Z,1528918595.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:35.848Z,1528918595.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:36.254Z,1528918596.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:36.652Z,1528918596.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:37.021Z,1528918597.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:37.471Z,1528918597.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:37.851Z,1528918597.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:38.263Z,1528918598.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:38.640Z,1528918598.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:39.072Z,1528918599.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:39.445Z,1528918599.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:39.895Z,1528918599.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:40.236Z,1528918600.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:40.632Z,1528918600.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:41.085Z,1528918601.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:41.436Z,1528918601.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:41.854Z,1528918601.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:42.248Z,1528918602.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:42.639Z,1528918602.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:43.016Z,1528918603.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:43.455Z,1528918603.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:43.878Z,1528918603.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:44.264Z,1528918604.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:44.675Z,1528918604.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:45.057Z,1528918605.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:45.448Z,1528918605.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:45.843Z,1528918605.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:46.244Z,1528918606.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:46.667Z,1528918606.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:47.094Z,1528918607.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:47.441Z,1528918607.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:47.859Z,1528918607.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:48.288Z,1528918608.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:48.689Z,1528918608.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:49.052Z,1528918609.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:49.458Z,1528918609.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:49.839Z,1528918609.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:50.239Z,1528918610.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:50.680Z,1528918610.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:51.051Z,1528918611.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:51.485Z,1528918611.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:51.856Z,1528918611.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:52.244Z,1528918612.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:52.661Z,1528918612.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:53.095Z,1528918613.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:53.430Z,1528918613.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:53.860Z,1528918613.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:54.308Z,1528918614.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:54.638Z,1528918614.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:55.061Z,1528918615.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:55.423Z,1528918615.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:55.868Z,1528918615.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:56.239Z,1528918616.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:56.646Z,1528918616.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:57.055Z,1528918617.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:57.435Z,1528918617.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:57.841Z,1528918617.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:58.244Z,1528918618.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:58.643Z,1528918618.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:59.036Z,1528918619.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:59.435Z,1528918619.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:36:59.862Z,1528918619.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:00.331Z,1528918620.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:00.677Z,1528918620.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:01.031Z,1528918621.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:01.484Z,1528918621.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:01.834Z,1528918621.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:02.239Z,1528918622.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:02.661Z,1528918622.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:03.059Z,1528918623.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:03.463Z,1528918623.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:03.852Z,1528918623.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:04.240Z,1528918624.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:04.626Z,1528918624.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:05.033Z,1528918625.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:05.430Z,1528918625.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:05.844Z,1528918625.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:06.245Z,1528918626.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:06.648Z,1528918626.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:07.040Z,1528918627.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:07.458Z,1528918627.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:07.849Z,1528918627.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:08.245Z,1528918628.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:08.687Z,1528918628.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:09.055Z,1528918629.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:09.458Z,1528918629.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:09.849Z,1528918629.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:15.968Z,1528918635.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:16.186Z,1528918636.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:16.583Z,1528918636.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:16.976Z,1528918636.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:17.395Z,1528918637.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:17.788Z,1528918637.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:18.154Z,1528918638.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:18.552Z,1528918638.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:18.999Z,1528918638.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:19.375Z,1528918639.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:19.800Z,1528918639.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:20.180Z,1528918640.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:20.580Z,1528918640.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:21.057Z,1528918641.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:21.360Z,1528918641.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:21.804Z,1528918641.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:22.143Z,1528918642.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:22.568Z,1528918642.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:22.972Z,1528918642.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:23.370Z,1528918643.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:23.763Z,1528918643.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:24.175Z,1528918644.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:24.573Z,1528918644.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:25.014Z,1528918645.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:25.385Z,1528918645.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:25.768Z,1528918645.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:26.179Z,1528918646.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:26.545Z,1528918646.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:26.982Z,1528918646.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:27.382Z,1528918647.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:27.744Z,1528918647.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:28.152Z,1528918648.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:28.559Z,1528918648.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:28.985Z,1528918648.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:29.398Z,1528918649.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:29.790Z,1528918649.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:30.162Z,1528918650.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:30.592Z,1528918650.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:30.998Z,1528918650.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:31.371Z,1528918651.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:31.754Z,1528918651.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:32.175Z,1528918652.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:32.543Z,1528918652.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:32.982Z,1528918652.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:33.400Z,1528918653.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:33.789Z,1528918653.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:34.156Z,1528918654.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:34.568Z,1528918654.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:34.957Z,1528918654.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:35.356Z,1528918655.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:35.767Z,1528918655.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:36.180Z,1528918656.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:36.619Z,1528918656.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:36.979Z,1528918656.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:37.369Z,1528918657.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:37.756Z,1528918657.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:38.159Z,1528918658.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:38.544Z,1528918658.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:38.971Z,1528918658.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:39.404Z,1528918659.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:39.771Z,1528918659.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:40.166Z,1528918660.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:40.619Z,1528918660.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:40.971Z,1528918660.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:41.348Z,1528918661.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:41.859Z,1528918661.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:42.178Z,1528918662.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:42.601Z,1528918662.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:42.981Z,1528918662.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:43.374Z,1528918663.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:43.740Z,1528918663.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:44.163Z,1528918664.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:44.592Z,1528918664.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:44.996Z,1528918664.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:45.405Z,1528918665.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:45.789Z,1528918665.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:46.196Z,1528918666.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:46.595Z,1528918666.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:46.960Z,1528918666.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:47.386Z,1528918667.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:47.790Z,1528918667.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:48.204Z,1528918668.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:48.591Z,1528918668.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:48.942Z,1528918668.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:49.380Z,1528918669.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:49.783Z,1528918669.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:50.146Z,1528918670.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:50.558Z,1528918670.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:50.993Z,1528918670.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:51.394Z,1528918671.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:51.764Z,1528918671.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:52.164Z,1528918672.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:52.574Z,1528918672.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:52.963Z,1528918672.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:53.371Z,1528918673.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:53.805Z,1528918673.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:54.176Z,1528918674.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:54.577Z,1528918674.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:54.985Z,1528918674.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:55.344Z,1528918675.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:55.747Z,1528918675.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:56.183Z,1528918676.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:56.540Z,1528918676.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:56.986Z,1528918676.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:57.368Z,1528918677.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:57.759Z,1528918677.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:58.154Z,1528918678.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:58.565Z,1528918678.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:58.939Z,1528918678.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:59.346Z,1528918679.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:37:59.794Z,1528918679.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:00.193Z,1528918680.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:00.548Z,1528918680.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:00.987Z,1528918680.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:01.372Z,1528918681.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:01.744Z,1528918681.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:02.153Z,1528918682.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:02.544Z,1528918682.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:02.999Z,1528918682.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:03.386Z,1528918683.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:03.798Z,1528918683.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:04.164Z,1528918684.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:04.602Z,1528918684.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:04.950Z,1528918684.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:05.360Z,1528918685.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:05.804Z,1528918685.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:06.171Z,1528918686.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:06.574Z,1528918686.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:06.973Z,1528918686.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:07.363Z,1528918687.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:07.771Z,1528918687.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:08.180Z,1528918688.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:08.565Z,1528918688.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:08.982Z,1528918688.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:09.388Z,1528918689.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:09.771Z,1528918689.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:10.148Z,1528918690.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:16.542Z,1528918696.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:16.736Z,1528918696.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:17.122Z,1528918697.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:17.539Z,1528918697.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:17.920Z,1528918697.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:18.319Z,1528918698.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:18.702Z,1528918698.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:19.094Z,1528918699.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:19.500Z,1528918699.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:19.930Z,1528918699.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:20.296Z,1528918700.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:20.726Z,1528918700.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:21.105Z,1528918701.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:21.514Z,1528918701.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:21.919Z,1528918701.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:22.348Z,1528918702.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:22.712Z,1528918702.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:23.114Z,1528918703.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:23.546Z,1528918703.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:23.939Z,1528918703.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:24.336Z,1528918704.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:24.676Z,1528918704.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:25.113Z,1528918705.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:25.507Z,1528918705.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:25.962Z,1528918705.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:26.314Z,1528918706.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:26.742Z,1528918706.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:27.135Z,1528918707.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:27.504Z,1528918707.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:27.903Z,1528918707.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:28.347Z,1528918708.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:28.732Z,1528918708.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:29.131Z,1528918709.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:29.516Z,1528918709.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:29.909Z,1528918709.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:30.300Z,1528918710.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:30.765Z,1528918710.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:31.120Z,1528918711.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:31.527Z,1528918711.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:31.908Z,1528918711.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:32.288Z,1528918712.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:32.721Z,1528918712.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:33.090Z,1528918713.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:33.503Z,1528918713.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:33.922Z,1528918713.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:34.359Z,1528918714.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:34.719Z,1528918714.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:35.103Z,1528918715.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:35.545Z,1528918715.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:35.916Z,1528918715.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:36.320Z,1528918716.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:36.726Z,1528918716.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:37.137Z,1528918717.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:37.524Z,1528918717.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:37.928Z,1528918717.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:38.318Z,1528918718.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:38.722Z,1528918718.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:39.115Z,1528918719.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:39.508Z,1528918719.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:39.930Z,1528918719.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:40.351Z,1528918720.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:40.721Z,1528918720.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:41.142Z,1528918721.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:41.521Z,1528918721.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:41.912Z,1528918721.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:42.303Z,1528918722.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:42.720Z,1528918722.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:43.121Z,1528918723.121 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:43.121Z,1528918723.121 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 323
2018-06-13T19:38:43.121Z,1528918723.121 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:38:43.123Z,1528918723.123 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:43.123Z,1528918723.123 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 323
2018-06-13T19:38:43.123Z,1528918723.123 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:38:43.145Z,1528918723.145 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:43.145Z,1528918723.145 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 323
2018-06-13T19:38:43.145Z,1528918723.145 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:38:43.241Z,1528918723.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:38:43.241Z,1528918723.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:38:43.242Z,1528918723.242 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:38:43.656Z,1528918723.656 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:38:43.656Z,1528918723.656 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 323
2018-06-13T19:38:43.657Z,1528918723.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:38:43.657Z,1528918723.657 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 323
2018-06-13T19:38:43.657Z,1528918723.657 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:38:43.657Z,1528918723.657 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 323
2018-06-13T19:38:43.948Z,1528918723.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:38:43.966Z,1528918723.966 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:38:43.969Z,1528918723.969 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:38:43.975Z,1528918723.975 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:38:43.975Z,1528918723.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:38:43.975Z,1528918723.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:38:43.976Z,1528918723.976 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:38:43.979Z,1528918723.979 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:38:43.979Z,1528918723.979 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:38:44.305Z,1528918724.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:38:44.306Z,1528918724.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:44.736Z,1528918724.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:38:44.742Z,1528918724.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:45.151Z,1528918725.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:38:45.152Z,1528918725.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:45.541Z,1528918725.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:38:45.543Z,1528918725.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:45.897Z,1528918725.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T19:38:45.898Z,1528918725.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:46.312Z,1528918726.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T19:38:46.313Z,1528918726.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:46.696Z,1528918726.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:38:46.701Z,1528918726.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:47.117Z,1528918727.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T19:38:47.118Z,1528918727.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:47.574Z,1528918727.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T19:38:47.575Z,1528918727.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:47.913Z,1528918727.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T19:38:47.914Z,1528918727.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:48.329Z,1528918728.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T19:38:48.330Z,1528918728.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:48.734Z,1528918728.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T19:38:48.735Z,1528918728.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:49.120Z,1528918729.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T19:38:49.130Z,1528918729.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:49.524Z,1528918729.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T19:38:49.532Z,1528918729.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:49.915Z,1528918729.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T19:38:49.916Z,1528918729.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:50.321Z,1528918730.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T19:38:50.322Z,1528918730.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:50.727Z,1528918730.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T19:38:50.728Z,1528918730.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:51.170Z,1528918731.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T19:38:51.171Z,1528918731.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:51.525Z,1528918731.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T19:38:51.526Z,1528918731.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:51.929Z,1528918731.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T19:38:51.930Z,1528918731.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:52.343Z,1528918732.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T19:38:52.344Z,1528918732.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:52.719Z,1528918732.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T19:38:52.720Z,1528918732.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:53.100Z,1528918733.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T19:38:53.101Z,1528918733.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:53.551Z,1528918733.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T19:38:53.552Z,1528918733.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:53.924Z,1528918733.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T19:38:53.929Z,1528918733.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:54.324Z,1528918734.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T19:38:54.330Z,1528918734.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:54.752Z,1528918734.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T19:38:54.753Z,1528918734.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:55.099Z,1528918735.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T19:38:55.100Z,1528918735.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:55.536Z,1528918735.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T19:38:55.542Z,1528918735.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:55.942Z,1528918735.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T19:38:55.943Z,1528918735.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:56.308Z,1528918736.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T19:38:56.330Z,1528918736.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:56.712Z,1528918736.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:38:56.713Z,1528918736.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:57.141Z,1528918737.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:38:57.142Z,1528918737.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:57.542Z,1528918737.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T19:38:57.543Z,1528918737.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:57.905Z,1528918737.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:38:57.906Z,1528918737.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:58.319Z,1528918738.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:38:58.320Z,1528918738.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:58.744Z,1528918738.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:38:58.749Z,1528918738.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:59.138Z,1528918739.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:38:59.139Z,1528918739.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:59.553Z,1528918739.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:38:59.554Z,1528918739.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:38:59.915Z,1528918739.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T19:38:59.916Z,1528918739.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:00.328Z,1528918740.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T19:39:00.333Z,1528918740.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:00.726Z,1528918740.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:39:00.727Z,1528918740.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:01.120Z,1528918741.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T19:39:01.125Z,1528918741.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:01.526Z,1528918741.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T19:39:01.527Z,1528918741.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:01.924Z,1528918741.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T19:39:01.925Z,1528918741.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:02.319Z,1528918742.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T19:39:02.320Z,1528918742.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:02.735Z,1528918742.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T19:39:02.736Z,1528918742.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:03.164Z,1528918743.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:03.545Z,1528918743.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:03.946Z,1528918743.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:04.343Z,1528918744.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:04.729Z,1528918744.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:05.124Z,1528918745.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:05.559Z,1528918745.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:05.911Z,1528918745.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:06.317Z,1528918746.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:06.749Z,1528918746.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:07.153Z,1528918747.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:07.520Z,1528918747.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:07.930Z,1528918747.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:07.932Z,1528918747.932 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T19:39:07.933Z,1528918747.933 [Default:CheckIn:C.Wait] Stopped
2018-06-13T19:39:07.933Z,1528918747.933 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T19:39:07.933Z,1528918747.933 [Default:CheckIn:D] Running Loop=1
2018-06-13T19:39:08.318Z,1528918748.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:08.321Z,1528918748.321 [Default:CheckIn:D] Stopped
2018-06-13T19:39:08.321Z,1528918748.321 [Default:CheckIn:E] Running Loop=1
2018-06-13T19:39:08.720Z,1528918748.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:08.728Z,1528918748.728 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 971.914583 min 
2018-06-13T19:39:08.728Z,1528918748.728 [Default:CheckIn:E] Stopped
2018-06-13T19:39:08.728Z,1528918748.728 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T19:39:08.728Z,1528918748.728 [Default:CheckIn] Stopped
2018-06-13T19:39:08.733Z,1528918748.733 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T19:39:08.733Z,1528918748.733 [Default:CheckIn](INFO): Running loop #94
2018-06-13T19:39:08.733Z,1528918748.733 [Default:CheckIn] Running Loop=94
2018-06-13T19:39:08.733Z,1528918748.733 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T19:39:08.733Z,1528918748.733 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T19:39:09.134Z,1528918749.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:09.512Z,1528918749.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:09.943Z,1528918749.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:10.346Z,1528918750.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:16.901Z,1528918756.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:17.075Z,1528918757.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:17.452Z,1528918757.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:17.859Z,1528918757.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:18.256Z,1528918758.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:18.695Z,1528918758.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:19.068Z,1528918759.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:19.498Z,1528918759.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:19.880Z,1528918759.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:20.247Z,1528918760.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:20.680Z,1528918760.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:21.075Z,1528918761.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:21.451Z,1528918761.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:21.861Z,1528918761.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:22.272Z,1528918762.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:22.675Z,1528918762.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:23.074Z,1528918763.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:23.484Z,1528918763.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:23.903Z,1528918763.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:24.248Z,1528918764.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:24.682Z,1528918764.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:25.085Z,1528918765.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:25.462Z,1528918765.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:25.869Z,1528918765.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:26.263Z,1528918766.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:26.672Z,1528918766.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:27.083Z,1528918767.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:27.479Z,1528918767.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:27.883Z,1528918767.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:28.284Z,1528918768.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:28.684Z,1528918768.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:29.095Z,1528918769.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:29.463Z,1528918769.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:29.861Z,1528918769.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:30.272Z,1528918770.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:30.637Z,1528918770.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:31.064Z,1528918771.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:31.474Z,1528918771.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:31.884Z,1528918771.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:32.268Z,1528918772.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:32.655Z,1528918772.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:33.059Z,1528918773.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:33.459Z,1528918773.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:33.883Z,1528918773.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:34.290Z,1528918774.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:34.690Z,1528918774.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:35.071Z,1528918775.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:35.468Z,1528918775.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:35.870Z,1528918775.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:36.272Z,1528918776.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:36.651Z,1528918776.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:37.064Z,1528918777.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:37.489Z,1528918777.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:37.876Z,1528918777.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:38.265Z,1528918778.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:38.682Z,1528918778.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:39.068Z,1528918779.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:39.451Z,1528918779.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:39.863Z,1528918779.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:40.284Z,1528918780.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:40.675Z,1528918780.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:41.080Z,1528918781.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:41.489Z,1528918781.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:41.879Z,1528918781.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:42.255Z,1528918782.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:42.684Z,1528918782.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:43.111Z,1528918783.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:43.459Z,1528918783.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:43.970Z,1528918783.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:44.255Z,1528918784.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:44.644Z,1528918784.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:45.068Z,1528918785.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:45.450Z,1528918785.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:45.850Z,1528918785.850 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T19:39:45.850Z,1528918785.850 [BPC1] Communications Fault, FailCount= 6
2018-06-13T19:39:45.850Z,1528918785.850 [BPC1](ERROR): Communications Fault
2018-06-13T19:39:45.892Z,1528918785.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:45.985Z,1528918785.985 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T19:39:46.298Z,1528918786.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:46.668Z,1528918786.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:47.069Z,1528918787.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:47.171Z,1528918787.171 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T19:39:47.171Z,1528918787.171 [BPC1] No Fault, FailCount= 6
2018-06-13T19:39:47.567Z,1528918787.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:47.885Z,1528918787.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:48.275Z,1528918788.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:48.680Z,1528918788.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:49.054Z,1528918789.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:49.493Z,1528918789.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:49.898Z,1528918789.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:50.268Z,1528918790.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:50.698Z,1528918790.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:51.063Z,1528918791.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:51.448Z,1528918791.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:51.872Z,1528918791.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:52.302Z,1528918792.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:52.667Z,1528918792.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:53.063Z,1528918793.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:53.470Z,1528918793.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:53.862Z,1528918793.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:54.256Z,1528918794.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:54.667Z,1528918794.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:55.076Z,1528918795.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:55.484Z,1528918795.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:55.890Z,1528918795.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:56.270Z,1528918796.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:56.683Z,1528918796.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:57.074Z,1528918797.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:57.466Z,1528918797.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:57.864Z,1528918797.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:58.315Z,1528918798.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:58.686Z,1528918798.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:59.079Z,1528918799.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:59.486Z,1528918799.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:39:59.852Z,1528918799.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:00.248Z,1528918800.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:00.691Z,1528918800.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:01.090Z,1528918801.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:01.489Z,1528918801.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:01.864Z,1528918801.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:02.260Z,1528918802.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:02.668Z,1528918802.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:03.085Z,1528918803.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:03.471Z,1528918803.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:03.919Z,1528918803.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:04.288Z,1528918804.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:04.688Z,1528918804.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:05.066Z,1528918805.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:05.492Z,1528918805.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:05.873Z,1528918805.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:06.264Z,1528918806.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:06.694Z,1528918806.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:07.080Z,1528918807.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:07.473Z,1528918807.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:07.906Z,1528918807.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:08.267Z,1528918808.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:08.676Z,1528918808.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:09.083Z,1528918809.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:09.460Z,1528918809.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:09.882Z,1528918809.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:10.293Z,1528918810.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:10.673Z,1528918810.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:16.949Z,1528918816.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:17.150Z,1528918817.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:17.525Z,1528918817.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:17.937Z,1528918817.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:18.336Z,1528918818.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:18.708Z,1528918818.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:19.122Z,1528918819.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:19.510Z,1528918819.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:19.923Z,1528918819.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:20.316Z,1528918820.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:20.695Z,1528918820.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:21.131Z,1528918821.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:21.527Z,1528918821.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:21.920Z,1528918821.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:22.353Z,1528918822.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:22.720Z,1528918822.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:23.155Z,1528918823.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:23.531Z,1528918823.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:23.935Z,1528918823.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:24.287Z,1528918824.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:24.702Z,1528918824.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:25.149Z,1528918825.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:25.499Z,1528918825.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:25.954Z,1528918825.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:26.373Z,1528918826.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:26.697Z,1528918826.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:27.092Z,1528918827.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:27.552Z,1528918827.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:27.896Z,1528918827.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:28.305Z,1528918828.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:28.716Z,1528918828.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:29.115Z,1528918829.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:29.526Z,1528918829.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:29.939Z,1528918829.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:30.343Z,1528918830.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:30.698Z,1528918830.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:31.123Z,1528918831.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:31.511Z,1528918831.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:31.936Z,1528918831.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:32.336Z,1528918832.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:32.751Z,1528918832.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:33.100Z,1528918833.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:33.512Z,1528918833.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:33.912Z,1528918833.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:34.312Z,1528918834.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:34.730Z,1528918834.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:35.117Z,1528918835.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:35.524Z,1528918835.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:35.926Z,1528918835.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:36.297Z,1528918836.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:36.697Z,1528918836.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:37.097Z,1528918837.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:37.509Z,1528918837.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:37.933Z,1528918837.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:38.344Z,1528918838.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:38.730Z,1528918838.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:39.112Z,1528918839.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:39.492Z,1528918839.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:39.905Z,1528918839.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:40.306Z,1528918840.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:40.744Z,1528918840.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:41.118Z,1528918841.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:41.545Z,1528918841.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:41.955Z,1528918841.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:42.298Z,1528918842.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:42.730Z,1528918842.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:43.140Z,1528918843.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:43.534Z,1528918843.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:43.940Z,1528918843.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:44.350Z,1528918844.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:44.738Z,1528918844.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:45.093Z,1528918845.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:45.549Z,1528918845.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:45.914Z,1528918845.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:46.327Z,1528918846.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:46.751Z,1528918846.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:47.103Z,1528918847.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:47.515Z,1528918847.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:47.965Z,1528918847.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:48.366Z,1528918848.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:48.729Z,1528918848.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:49.096Z,1528918849.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:49.498Z,1528918849.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:49.904Z,1528918849.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:50.332Z,1528918850.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:50.725Z,1528918850.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:51.103Z,1528918851.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:51.505Z,1528918851.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:51.912Z,1528918851.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:52.323Z,1528918852.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:52.714Z,1528918852.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:53.133Z,1528918853.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:53.501Z,1528918853.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:53.910Z,1528918853.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:54.347Z,1528918854.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:54.743Z,1528918854.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:55.138Z,1528918855.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:55.536Z,1528918855.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:55.901Z,1528918855.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:56.316Z,1528918856.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:56.720Z,1528918856.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:57.119Z,1528918857.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:57.562Z,1528918857.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:57.939Z,1528918857.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:58.324Z,1528918858.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:58.747Z,1528918858.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:59.122Z,1528918859.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:59.509Z,1528918859.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:40:59.955Z,1528918859.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:00.341Z,1528918860.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:00.719Z,1528918860.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:01.136Z,1528918861.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:01.504Z,1528918861.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:01.928Z,1528918861.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:02.347Z,1528918862.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:02.720Z,1528918862.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:03.093Z,1528918863.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:03.508Z,1528918863.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:03.947Z,1528918863.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:04.342Z,1528918864.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:04.714Z,1528918864.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:05.112Z,1528918865.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:05.520Z,1528918865.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:05.919Z,1528918865.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:06.318Z,1528918866.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:06.710Z,1528918866.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:07.167Z,1528918867.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:07.535Z,1528918867.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:07.934Z,1528918867.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:08.328Z,1528918868.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:08.717Z,1528918868.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:09.147Z,1528918869.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:09.502Z,1528918869.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:09.919Z,1528918869.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:10.320Z,1528918870.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:10.768Z,1528918870.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:16.836Z,1528918876.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:17.062Z,1528918877.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:17.432Z,1528918877.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:17.832Z,1528918877.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:18.227Z,1528918878.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:18.623Z,1528918878.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:19.010Z,1528918879.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:19.443Z,1528918879.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:19.843Z,1528918879.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:20.214Z,1528918880.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:20.617Z,1528918880.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:21.012Z,1528918881.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:21.414Z,1528918881.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:21.820Z,1528918881.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:22.207Z,1528918882.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:22.615Z,1528918882.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:23.028Z,1528918883.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:23.432Z,1528918883.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:23.820Z,1528918883.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:24.219Z,1528918884.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:24.608Z,1528918884.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:25.010Z,1528918885.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:25.402Z,1528918885.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:25.824Z,1528918885.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:26.251Z,1528918886.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:26.634Z,1528918886.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:27.042Z,1528918887.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:27.427Z,1528918887.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:27.806Z,1528918887.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:28.238Z,1528918888.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:28.607Z,1528918888.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:29.040Z,1528918889.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:29.474Z,1528918889.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:29.854Z,1528918889.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:30.215Z,1528918890.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:30.612Z,1528918890.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:31.012Z,1528918891.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:31.412Z,1528918891.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:31.820Z,1528918891.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:32.224Z,1528918892.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:32.622Z,1528918892.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:33.032Z,1528918893.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:33.428Z,1528918893.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:33.842Z,1528918893.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:34.239Z,1528918894.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:34.601Z,1528918894.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:35.038Z,1528918895.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:35.448Z,1528918895.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:35.835Z,1528918895.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:36.217Z,1528918896.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:36.663Z,1528918896.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:36.996Z,1528918896.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:37.426Z,1528918897.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:37.808Z,1528918897.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:38.216Z,1528918898.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:38.626Z,1528918898.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:39.022Z,1528918899.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:39.407Z,1528918899.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:39.807Z,1528918899.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:40.219Z,1528918900.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:40.611Z,1528918900.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:41.086Z,1528918901.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:41.463Z,1528918901.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:41.871Z,1528918901.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:42.221Z,1528918902.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:42.620Z,1528918902.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:42.999Z,1528918902.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:43.419Z,1528918903.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:43.850Z,1528918903.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:44.225Z,1528918904.225 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:44.225Z,1528918904.225 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 324
2018-06-13T19:41:44.225Z,1528918904.225 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:41:44.227Z,1528918904.227 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:44.227Z,1528918904.227 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 324
2018-06-13T19:41:44.227Z,1528918904.227 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:41:44.237Z,1528918904.237 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:44.237Z,1528918904.237 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 324
2018-06-13T19:41:44.237Z,1528918904.237 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:41:44.333Z,1528918904.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:41:44.333Z,1528918904.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:41:44.334Z,1528918904.334 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:41:44.713Z,1528918904.713 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:41:44.713Z,1528918904.713 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 324
2018-06-13T19:41:44.714Z,1528918904.714 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:41:44.714Z,1528918904.714 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 324
2018-06-13T19:41:44.714Z,1528918904.714 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:41:44.714Z,1528918904.714 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 324
2018-06-13T19:41:45.049Z,1528918905.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:41:45.050Z,1528918905.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:41:45.050Z,1528918905.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:41:45.051Z,1528918905.051 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:41:45.051Z,1528918905.051 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:41:45.051Z,1528918905.051 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:41:45.052Z,1528918905.052 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:41:45.052Z,1528918905.052 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:41:45.052Z,1528918905.052 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:41:45.411Z,1528918905.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:41:45.411Z,1528918905.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:45.800Z,1528918905.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:41:45.809Z,1528918905.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:46.242Z,1528918906.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:41:46.243Z,1528918906.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:46.615Z,1528918906.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:41:46.616Z,1528918906.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:47.051Z,1528918907.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T19:41:47.052Z,1528918907.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:47.432Z,1528918907.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T19:41:47.433Z,1528918907.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:47.832Z,1528918907.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:41:47.839Z,1528918907.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:48.224Z,1528918908.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T19:41:48.230Z,1528918908.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:48.631Z,1528918908.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T19:41:48.632Z,1528918908.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:49.003Z,1528918909.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T19:41:49.004Z,1528918909.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:49.395Z,1528918909.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T19:41:49.396Z,1528918909.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:49.844Z,1528918909.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T19:41:49.845Z,1528918909.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:50.224Z,1528918910.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T19:41:50.229Z,1528918910.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:50.624Z,1528918910.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T19:41:50.629Z,1528918910.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:51.041Z,1528918911.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T19:41:51.042Z,1528918911.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:51.418Z,1528918911.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T19:41:51.419Z,1528918911.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:51.842Z,1528918911.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T19:41:51.843Z,1528918911.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:52.239Z,1528918912.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T19:41:52.240Z,1528918912.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:52.616Z,1528918912.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T19:41:52.634Z,1528918912.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:53.044Z,1528918913.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T19:41:53.053Z,1528918913.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:53.427Z,1528918913.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T19:41:53.428Z,1528918913.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:53.826Z,1528918913.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T19:41:53.827Z,1528918913.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:54.225Z,1528918914.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T19:41:54.226Z,1528918914.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:54.657Z,1528918914.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T19:41:54.658Z,1528918914.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:55.073Z,1528918915.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T19:41:55.074Z,1528918915.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:55.448Z,1528918915.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T19:41:55.473Z,1528918915.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:55.868Z,1528918915.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T19:41:55.869Z,1528918915.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:56.237Z,1528918916.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T19:41:56.238Z,1528918916.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:56.630Z,1528918916.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T19:41:56.642Z,1528918916.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:57.020Z,1528918917.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T19:41:57.021Z,1528918917.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:57.424Z,1528918917.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T19:41:57.445Z,1528918917.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:57.826Z,1528918917.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:41:57.828Z,1528918917.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:58.218Z,1528918918.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:41:58.220Z,1528918918.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:58.656Z,1528918918.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T19:41:58.661Z,1528918918.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:59.017Z,1528918919.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:41:59.018Z,1528918919.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:59.428Z,1528918919.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:41:59.450Z,1528918919.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:41:59.820Z,1528918919.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:41:59.825Z,1528918919.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:00.217Z,1528918920.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:42:00.218Z,1528918920.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:00.623Z,1528918920.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:42:00.623Z,1528918920.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:01.026Z,1528918921.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T19:42:01.027Z,1528918921.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:01.432Z,1528918921.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T19:42:01.438Z,1528918921.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:01.835Z,1528918921.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:42:01.836Z,1528918921.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:02.228Z,1528918922.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T19:42:02.233Z,1528918922.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:02.594Z,1528918922.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T19:42:02.595Z,1528918922.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:03.030Z,1528918923.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T19:42:03.031Z,1528918923.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:03.442Z,1528918923.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T19:42:03.443Z,1528918923.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:03.825Z,1528918923.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T19:42:03.826Z,1528918923.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:04.202Z,1528918924.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T19:42:04.203Z,1528918924.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:04.608Z,1528918924.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:05.036Z,1528918925.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:05.478Z,1528918925.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:05.835Z,1528918925.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:06.236Z,1528918926.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:06.616Z,1528918926.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:07.018Z,1528918927.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:07.444Z,1528918927.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:07.828Z,1528918927.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:08.259Z,1528918928.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:08.619Z,1528918928.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:09.071Z,1528918929.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:09.441Z,1528918929.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:09.832Z,1528918929.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:10.260Z,1528918930.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:10.611Z,1528918930.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:11.030Z,1528918931.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:17.262Z,1528918937.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:17.492Z,1528918937.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:17.898Z,1528918937.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:18.269Z,1528918938.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:18.703Z,1528918938.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:19.111Z,1528918939.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:19.436Z,1528918939.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:19.834Z,1528918939.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:20.243Z,1528918940.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:20.652Z,1528918940.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:21.083Z,1528918941.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:21.494Z,1528918941.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:21.893Z,1528918941.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:22.264Z,1528918942.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:22.659Z,1528918942.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:23.107Z,1528918943.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:23.471Z,1528918943.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:23.863Z,1528918943.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:24.274Z,1528918944.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:24.665Z,1528918944.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:25.060Z,1528918945.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:25.482Z,1528918945.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:25.847Z,1528918945.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:26.246Z,1528918946.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:26.644Z,1528918946.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:27.039Z,1528918947.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:27.444Z,1528918947.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:27.851Z,1528918947.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:28.273Z,1528918948.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:28.682Z,1528918948.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:29.044Z,1528918949.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:29.479Z,1528918949.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:29.844Z,1528918949.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:30.240Z,1528918950.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:30.643Z,1528918950.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:31.093Z,1528918951.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:31.443Z,1528918951.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:31.889Z,1528918951.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:32.248Z,1528918952.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:32.644Z,1528918952.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:33.048Z,1528918953.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:33.506Z,1528918953.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:33.902Z,1528918953.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:34.271Z,1528918954.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:34.677Z,1528918954.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:35.071Z,1528918955.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:35.467Z,1528918955.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:35.860Z,1528918955.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:36.276Z,1528918956.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:36.675Z,1528918956.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:37.070Z,1528918957.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:37.482Z,1528918957.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:37.852Z,1528918957.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:38.255Z,1528918958.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:38.663Z,1528918958.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:39.062Z,1528918959.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:39.476Z,1528918959.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:39.869Z,1528918959.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:40.271Z,1528918960.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:40.660Z,1528918960.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:41.059Z,1528918961.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:41.460Z,1528918961.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:41.865Z,1528918961.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:42.276Z,1528918962.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:42.663Z,1528918962.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:43.067Z,1528918963.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:43.456Z,1528918963.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:43.852Z,1528918963.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:44.263Z,1528918964.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:44.678Z,1528918964.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:45.060Z,1528918965.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:45.480Z,1528918965.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:45.860Z,1528918965.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:46.266Z,1528918966.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:46.672Z,1528918966.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:47.067Z,1528918967.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:47.503Z,1528918967.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:47.882Z,1528918967.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:48.260Z,1528918968.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:48.656Z,1528918968.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:49.064Z,1528918969.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:49.476Z,1528918969.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:49.860Z,1528918969.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:50.310Z,1528918970.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:50.660Z,1528918970.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:51.067Z,1528918971.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:51.460Z,1528918971.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:51.880Z,1528918971.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:52.246Z,1528918972.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:52.659Z,1528918972.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:53.051Z,1528918973.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:53.464Z,1528918973.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:53.858Z,1528918973.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:54.295Z,1528918974.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:54.638Z,1528918974.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:55.056Z,1528918975.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:55.436Z,1528918975.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:55.844Z,1528918975.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:56.259Z,1528918976.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:56.687Z,1528918976.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:57.057Z,1528918977.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:57.494Z,1528918977.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:57.842Z,1528918977.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:58.278Z,1528918978.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:58.659Z,1528918978.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:59.050Z,1528918979.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:59.456Z,1528918979.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:42:59.871Z,1528918979.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:00.257Z,1528918980.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:00.695Z,1528918980.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:01.032Z,1528918981.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:01.504Z,1528918981.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:01.846Z,1528918981.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:02.247Z,1528918982.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:02.660Z,1528918982.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:03.066Z,1528918983.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:03.496Z,1528918983.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:03.892Z,1528918983.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:04.226Z,1528918984.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:04.687Z,1528918984.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:05.072Z,1528918985.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:05.490Z,1528918985.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:05.894Z,1528918985.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:06.240Z,1528918986.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:06.638Z,1528918986.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:07.044Z,1528918987.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:07.508Z,1528918987.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:07.839Z,1528918987.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:08.275Z,1528918988.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:08.656Z,1528918988.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:09.079Z,1528918989.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:09.444Z,1528918989.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:09.854Z,1528918989.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:16.250Z,1528918996.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:16.444Z,1528918996.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:16.846Z,1528918996.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:17.253Z,1528918997.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:17.658Z,1528918997.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:18.026Z,1528918998.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:18.425Z,1528918998.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:18.852Z,1528918998.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:19.264Z,1528918999.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:19.639Z,1528918999.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:20.064Z,1528919000.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:20.443Z,1528919000.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:20.827Z,1528919000.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:21.270Z,1528919001.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:21.635Z,1528919001.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:22.046Z,1528919002.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:22.442Z,1528919002.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:22.846Z,1528919002.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:23.245Z,1528919003.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:23.639Z,1528919003.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:24.042Z,1528919004.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:24.442Z,1528919004.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:24.845Z,1528919004.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:25.264Z,1528919005.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:25.641Z,1528919005.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:26.043Z,1528919006.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:26.445Z,1528919006.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:26.819Z,1528919006.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:27.223Z,1528919007.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:27.628Z,1528919007.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:28.022Z,1528919008.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:28.451Z,1528919008.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:28.835Z,1528919008.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:29.236Z,1528919009.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:29.650Z,1528919009.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:30.052Z,1528919010.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:30.454Z,1528919010.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:30.827Z,1528919010.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:31.269Z,1528919011.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:31.649Z,1528919011.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:32.070Z,1528919012.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:32.420Z,1528919012.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:32.837Z,1528919012.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:33.227Z,1528919013.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:33.650Z,1528919013.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:34.030Z,1528919014.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:34.434Z,1528919014.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:34.860Z,1528919014.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:35.242Z,1528919015.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:35.639Z,1528919015.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:36.027Z,1528919016.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:36.440Z,1528919016.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:36.854Z,1528919016.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:37.245Z,1528919017.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:37.659Z,1528919017.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:38.064Z,1528919018.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:38.433Z,1528919018.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:38.834Z,1528919018.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:39.230Z,1528919019.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:39.687Z,1528919019.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:40.039Z,1528919020.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:40.454Z,1528919020.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:40.848Z,1528919020.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:41.252Z,1528919021.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:41.658Z,1528919021.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:42.034Z,1528919022.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:42.423Z,1528919022.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:42.829Z,1528919022.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:43.240Z,1528919023.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:43.668Z,1528919023.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:44.036Z,1528919024.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:44.442Z,1528919024.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:44.842Z,1528919024.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:45.253Z,1528919025.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:45.658Z,1528919025.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:46.046Z,1528919026.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:46.432Z,1528919026.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:46.875Z,1528919026.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:47.236Z,1528919027.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:47.632Z,1528919027.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:48.028Z,1528919028.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:48.431Z,1528919028.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:48.840Z,1528919028.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:49.256Z,1528919029.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:49.631Z,1528919029.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:50.040Z,1528919030.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:50.428Z,1528919030.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:50.844Z,1528919030.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:51.235Z,1528919031.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:51.652Z,1528919031.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:52.044Z,1528919032.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:52.457Z,1528919032.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:52.860Z,1528919032.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:53.227Z,1528919033.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:53.662Z,1528919033.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:54.023Z,1528919034.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:54.433Z,1528919034.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:54.840Z,1528919034.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:55.244Z,1528919035.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:55.653Z,1528919035.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:56.052Z,1528919036.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:56.436Z,1528919036.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:56.850Z,1528919036.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:57.234Z,1528919037.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:57.656Z,1528919037.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:58.028Z,1528919038.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:58.425Z,1528919038.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:58.830Z,1528919038.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:59.251Z,1528919039.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:43:59.644Z,1528919039.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:00.024Z,1528919040.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:00.424Z,1528919040.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:00.853Z,1528919040.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:01.240Z,1528919041.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:01.648Z,1528919041.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:02.072Z,1528919042.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:02.434Z,1528919042.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:02.836Z,1528919042.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:03.251Z,1528919043.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:03.624Z,1528919043.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:04.048Z,1528919044.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:04.431Z,1528919044.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:04.859Z,1528919044.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:05.251Z,1528919045.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:05.636Z,1528919045.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:06.049Z,1528919046.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:06.414Z,1528919046.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:06.845Z,1528919046.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:07.242Z,1528919047.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:07.621Z,1528919047.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:08.054Z,1528919048.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:08.428Z,1528919048.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:08.827Z,1528919048.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:08.852Z,1528919048.852 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T19:39:08.7Z
2018-06-13T19:44:08.852Z,1528919048.852 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T19:44:08.852Z,1528919048.852 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T19:44:09.231Z,1528919049.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:12.020Z,1528919052.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:12.220Z,1528919052.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:12.642Z,1528919052.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:16.489Z,1528919056.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:16.660Z,1528919056.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:17.052Z,1528919057.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:17.449Z,1528919057.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:17.847Z,1528919057.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:18.256Z,1528919058.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:18.657Z,1528919058.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:19.053Z,1528919059.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:19.447Z,1528919059.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:19.856Z,1528919059.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:20.248Z,1528919060.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:20.648Z,1528919060.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:21.049Z,1528919061.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:21.402Z,1528919061.402 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T19:44:21.403Z,1528919061.403 [NAL9602] Data Fault, FailCount= 4
2018-06-13T19:44:21.403Z,1528919061.403 [NAL9602](ERROR): Data Fault
2018-06-13T19:44:21.465Z,1528919061.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:21.562Z,1528919061.562 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T19:44:21.802Z,1528919061.802 [NAL9602](INFO): Powering down
2018-06-13T19:44:21.889Z,1528919061.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:22.254Z,1528919062.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:22.729Z,1528919062.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:22.817Z,1528919062.817 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T19:44:22.817Z,1528919062.817 [NAL9602] No Fault, FailCount= 4
2018-06-13T19:44:23.138Z,1528919063.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:23.487Z,1528919063.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:23.840Z,1528919063.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:24.253Z,1528919064.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:24.641Z,1528919064.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:25.043Z,1528919065.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:25.446Z,1528919065.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:25.852Z,1528919065.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:26.242Z,1528919066.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:26.646Z,1528919066.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:27.046Z,1528919067.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:27.450Z,1528919067.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:27.852Z,1528919067.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:28.247Z,1528919068.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:28.651Z,1528919068.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:29.047Z,1528919069.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:29.454Z,1528919069.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:29.847Z,1528919069.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:30.249Z,1528919070.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:30.648Z,1528919070.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:31.047Z,1528919071.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:31.452Z,1528919071.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:31.848Z,1528919071.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:32.242Z,1528919072.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:32.653Z,1528919072.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:33.046Z,1528919073.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:33.454Z,1528919073.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:33.852Z,1528919073.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:34.251Z,1528919074.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:34.656Z,1528919074.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:35.052Z,1528919075.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:35.450Z,1528919075.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:35.848Z,1528919075.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:36.252Z,1528919076.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:36.652Z,1528919076.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:37.048Z,1528919077.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:37.456Z,1528919077.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:37.856Z,1528919077.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:38.245Z,1528919078.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:38.652Z,1528919078.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:39.049Z,1528919079.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:39.442Z,1528919079.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:39.854Z,1528919079.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:40.255Z,1528919080.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:40.641Z,1528919080.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:41.058Z,1528919081.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:41.460Z,1528919081.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:41.833Z,1528919081.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:42.262Z,1528919082.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:42.636Z,1528919082.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:43.033Z,1528919083.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:43.464Z,1528919083.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:43.839Z,1528919083.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:44.236Z,1528919084.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:44.644Z,1528919084.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:45.043Z,1528919085.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:45.437Z,1528919085.437 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:45.437Z,1528919085.437 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 325
2018-06-13T19:44:45.437Z,1528919085.437 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:44:45.439Z,1528919085.439 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:45.439Z,1528919085.439 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 325
2018-06-13T19:44:45.439Z,1528919085.439 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:44:45.441Z,1528919085.441 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:45.441Z,1528919085.441 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 325
2018-06-13T19:44:45.441Z,1528919085.441 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:44:45.529Z,1528919085.529 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:44:45.529Z,1528919085.529 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:44:45.530Z,1528919085.530 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:44:45.921Z,1528919085.921 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:44:45.921Z,1528919085.921 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 325
2018-06-13T19:44:45.922Z,1528919085.922 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:44:45.922Z,1528919085.922 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 325
2018-06-13T19:44:45.922Z,1528919085.922 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:44:45.922Z,1528919085.922 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 325
2018-06-13T19:44:46.240Z,1528919086.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:44:46.241Z,1528919086.241 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:44:46.241Z,1528919086.241 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:44:46.241Z,1528919086.241 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:44:46.242Z,1528919086.242 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:44:46.242Z,1528919086.242 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:44:46.242Z,1528919086.242 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:44:46.243Z,1528919086.243 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:44:46.243Z,1528919086.243 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:44:46.643Z,1528919086.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:44:46.644Z,1528919086.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:47.048Z,1528919087.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:44:47.050Z,1528919087.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:47.442Z,1528919087.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:44:47.443Z,1528919087.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:47.843Z,1528919087.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:44:47.844Z,1528919087.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:48.247Z,1528919088.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T19:44:48.248Z,1528919088.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:48.651Z,1528919088.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T19:44:48.652Z,1528919088.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:49.047Z,1528919089.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:44:49.048Z,1528919089.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:49.447Z,1528919089.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T19:44:49.448Z,1528919089.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:49.847Z,1528919089.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T19:44:49.848Z,1528919089.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:50.243Z,1528919090.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T19:44:50.244Z,1528919090.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:50.647Z,1528919090.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T19:44:50.648Z,1528919090.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:51.047Z,1528919091.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T19:44:51.048Z,1528919091.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:51.441Z,1528919091.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T19:44:51.442Z,1528919091.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:51.845Z,1528919091.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T19:44:51.846Z,1528919091.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:52.207Z,1528919092.207 [NAL9602](INFO): Powering up NAL9602
2018-06-13T19:44:52.251Z,1528919092.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T19:44:52.252Z,1528919092.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:52.640Z,1528919092.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T19:44:52.641Z,1528919092.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:53.052Z,1528919093.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T19:44:53.053Z,1528919093.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:53.446Z,1528919093.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T19:44:53.447Z,1528919093.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:53.849Z,1528919093.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T19:44:53.850Z,1528919093.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:54.247Z,1528919094.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T19:44:54.248Z,1528919094.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:54.651Z,1528919094.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T19:44:54.652Z,1528919094.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:55.044Z,1528919095.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T19:44:55.045Z,1528919095.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:55.446Z,1528919095.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T19:44:55.447Z,1528919095.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:55.848Z,1528919095.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T19:44:55.849Z,1528919095.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:56.241Z,1528919096.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T19:44:56.242Z,1528919096.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:56.646Z,1528919096.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T19:44:56.647Z,1528919096.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:57.045Z,1528919097.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T19:44:57.046Z,1528919097.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:57.452Z,1528919097.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T19:44:57.457Z,1528919097.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:57.852Z,1528919097.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T19:44:57.853Z,1528919097.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:58.248Z,1528919098.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T19:44:58.249Z,1528919098.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:58.651Z,1528919098.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T19:44:58.652Z,1528919098.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:59.052Z,1528919099.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:44:59.053Z,1528919099.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:59.449Z,1528919099.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:44:59.450Z,1528919099.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:44:59.847Z,1528919099.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T19:44:59.848Z,1528919099.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:00.252Z,1528919100.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:45:00.253Z,1528919100.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:00.655Z,1528919100.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:45:00.656Z,1528919100.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:01.048Z,1528919101.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:45:01.049Z,1528919101.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:01.456Z,1528919101.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:45:01.457Z,1528919101.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:01.855Z,1528919101.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:45:01.856Z,1528919101.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:02.250Z,1528919102.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T19:45:02.251Z,1528919102.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:02.652Z,1528919102.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T19:45:02.654Z,1528919102.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:03.056Z,1528919103.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:45:03.057Z,1528919103.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:03.407Z,1528919103.407 [NAL9602](INFO): NAL9602 initialized
2018-06-13T19:45:03.460Z,1528919103.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T19:45:03.461Z,1528919103.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:03.852Z,1528919103.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T19:45:03.853Z,1528919103.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:04.264Z,1528919104.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T19:45:04.269Z,1528919104.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:04.660Z,1528919104.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T19:45:04.661Z,1528919104.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:05.057Z,1528919105.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T19:45:05.058Z,1528919105.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:05.456Z,1528919105.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:05.857Z,1528919105.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:06.263Z,1528919106.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:06.653Z,1528919106.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:07.059Z,1528919107.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:07.468Z,1528919107.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:07.875Z,1528919107.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:08.238Z,1528919108.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:08.641Z,1528919108.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:09.042Z,1528919109.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:09.444Z,1528919109.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:09.845Z,1528919109.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:10.273Z,1528919110.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:10.671Z,1528919110.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:11.055Z,1528919111.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:11.444Z,1528919111.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:11.843Z,1528919111.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:12.247Z,1528919112.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:12.596Z,1528919112.596 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:45:12.652Z,1528919112.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:13.052Z,1528919113.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:13.451Z,1528919113.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:13.855Z,1528919113.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:14.243Z,1528919114.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:14.646Z,1528919114.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:15.045Z,1528919115.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:15.443Z,1528919115.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:15.846Z,1528919115.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:16.255Z,1528919116.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:16.655Z,1528919116.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:17.052Z,1528919117.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:17.448Z,1528919117.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:17.843Z,1528919117.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:18.244Z,1528919118.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:18.647Z,1528919118.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:19.052Z,1528919119.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:19.455Z,1528919119.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:19.855Z,1528919119.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:20.247Z,1528919120.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:20.646Z,1528919120.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:21.048Z,1528919121.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:21.447Z,1528919121.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:21.858Z,1528919121.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:22.253Z,1528919122.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:22.653Z,1528919122.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:23.053Z,1528919123.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:23.449Z,1528919123.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:23.848Z,1528919123.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:24.250Z,1528919124.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:24.649Z,1528919124.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:25.052Z,1528919125.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:25.455Z,1528919125.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:25.856Z,1528919125.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:26.289Z,1528919126.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:26.656Z,1528919126.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:27.050Z,1528919127.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:27.444Z,1528919127.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:27.847Z,1528919127.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:28.258Z,1528919128.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:28.658Z,1528919128.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:29.054Z,1528919129.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:29.448Z,1528919129.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:29.843Z,1528919129.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:30.248Z,1528919130.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:30.648Z,1528919130.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:31.053Z,1528919131.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:31.457Z,1528919131.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:31.856Z,1528919131.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:32.292Z,1528919132.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:32.646Z,1528919132.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:33.047Z,1528919133.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:33.452Z,1528919133.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:33.852Z,1528919133.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:34.257Z,1528919134.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:34.656Z,1528919134.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:35.055Z,1528919135.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:35.444Z,1528919135.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:35.843Z,1528919135.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:36.247Z,1528919136.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:36.652Z,1528919136.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:37.053Z,1528919137.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:37.457Z,1528919137.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:37.856Z,1528919137.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:38.246Z,1528919138.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:38.652Z,1528919138.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:39.047Z,1528919139.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:39.448Z,1528919139.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:39.852Z,1528919139.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:40.259Z,1528919140.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:40.657Z,1528919140.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:41.057Z,1528919141.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:41.448Z,1528919141.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:41.852Z,1528919141.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:42.249Z,1528919142.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:42.647Z,1528919142.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:42.996Z,1528919142.996 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:45:43.066Z,1528919143.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:43.464Z,1528919143.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:43.864Z,1528919143.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:44.252Z,1528919144.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:44.647Z,1528919144.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:45.054Z,1528919145.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:45.449Z,1528919145.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:45.852Z,1528919145.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:46.268Z,1528919146.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:46.660Z,1528919146.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:47.064Z,1528919147.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:47.447Z,1528919147.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:47.853Z,1528919147.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:48.247Z,1528919148.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:48.647Z,1528919148.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:49.057Z,1528919149.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:49.459Z,1528919149.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:49.862Z,1528919149.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:50.247Z,1528919150.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:50.652Z,1528919150.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:51.052Z,1528919151.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:51.448Z,1528919151.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:51.853Z,1528919151.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:52.268Z,1528919152.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:52.657Z,1528919152.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:53.057Z,1528919153.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:53.452Z,1528919153.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:53.847Z,1528919153.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:54.247Z,1528919154.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:54.646Z,1528919154.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:55.057Z,1528919155.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:55.464Z,1528919155.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:55.864Z,1528919155.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:56.248Z,1528919156.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:56.652Z,1528919156.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:57.048Z,1528919157.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:57.452Z,1528919157.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:57.846Z,1528919157.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:58.261Z,1528919158.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:58.660Z,1528919158.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:59.053Z,1528919159.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:59.447Z,1528919159.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:45:59.852Z,1528919159.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:00.248Z,1528919160.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:00.652Z,1528919160.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:01.057Z,1528919161.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:01.458Z,1528919161.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:01.868Z,1528919161.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:02.246Z,1528919162.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:02.652Z,1528919162.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:03.049Z,1528919163.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:03.453Z,1528919163.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:03.852Z,1528919163.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:04.268Z,1528919164.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:04.660Z,1528919164.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:05.057Z,1528919165.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:05.449Z,1528919165.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:05.848Z,1528919165.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:06.254Z,1528919166.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:06.661Z,1528919166.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:07.059Z,1528919167.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:07.460Z,1528919167.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:07.868Z,1528919167.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:08.246Z,1528919168.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:08.647Z,1528919168.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:09.053Z,1528919169.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:09.450Z,1528919169.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:09.852Z,1528919169.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:10.264Z,1528919170.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:10.653Z,1528919170.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:11.058Z,1528919171.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:11.462Z,1528919171.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:11.865Z,1528919171.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:12.251Z,1528919172.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:12.655Z,1528919172.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:13.049Z,1528919173.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:13.396Z,1528919173.396 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:46:13.456Z,1528919173.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:13.851Z,1528919173.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:14.239Z,1528919174.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:14.644Z,1528919174.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:15.044Z,1528919175.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:15.447Z,1528919175.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:15.844Z,1528919175.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:16.251Z,1528919176.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:16.652Z,1528919176.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:17.052Z,1528919177.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:17.398Z,1528919177.398 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=180.227371
2018-06-13T19:46:17.452Z,1528919177.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:17.847Z,1528919177.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:18.247Z,1528919178.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:18.680Z,1528919178.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:19.060Z,1528919179.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:20.276Z,1528919180.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:20.439Z,1528919180.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:20.833Z,1528919180.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:21.237Z,1528919181.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:21.640Z,1528919181.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:22.030Z,1528919182.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:22.431Z,1528919182.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:22.852Z,1528919182.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:23.240Z,1528919183.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:24.390Z,1528919184.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:24.526Z,1528919184.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:24.937Z,1528919184.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:25.340Z,1528919185.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:25.757Z,1528919185.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:26.137Z,1528919186.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:26.537Z,1528919186.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:26.955Z,1528919186.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:27.347Z,1528919187.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:28.491Z,1528919188.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:28.619Z,1528919188.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:29.050Z,1528919189.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:29.451Z,1528919189.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:29.852Z,1528919189.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:30.247Z,1528919190.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:30.658Z,1528919190.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:31.037Z,1528919191.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:31.445Z,1528919191.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:31.853Z,1528919191.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:33.050Z,1528919193.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:33.208Z,1528919193.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:33.612Z,1528919193.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:34.007Z,1528919194.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:34.405Z,1528919194.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:34.808Z,1528919194.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:35.202Z,1528919195.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:35.610Z,1528919195.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:36.014Z,1528919196.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:36.415Z,1528919196.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:37.577Z,1528919197.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:37.723Z,1528919197.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:38.119Z,1528919198.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:38.525Z,1528919198.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:38.922Z,1528919198.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:39.313Z,1528919199.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:39.700Z,1528919199.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:40.101Z,1528919200.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:40.521Z,1528919200.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:40.933Z,1528919200.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:41.328Z,1528919201.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:42.503Z,1528919202.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:42.670Z,1528919202.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:43.088Z,1528919203.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:43.486Z,1528919203.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:43.887Z,1528919203.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:44.280Z,1528919204.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:44.697Z,1528919204.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:45.064Z,1528919205.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:45.496Z,1528919205.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:46.648Z,1528919206.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:46.799Z,1528919206.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:47.197Z,1528919207.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:47.605Z,1528919207.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:47.936Z,1528919207.936 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:46:48.005Z,1528919208.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:48.392Z,1528919208.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:48.792Z,1528919208.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:49.191Z,1528919209.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:49.590Z,1528919209.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:50.006Z,1528919210.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:50.397Z,1528919210.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:51.565Z,1528919211.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:51.740Z,1528919211.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:52.143Z,1528919212.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:52.543Z,1528919212.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:52.941Z,1528919212.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:53.336Z,1528919213.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:53.741Z,1528919213.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:54.117Z,1528919214.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:54.521Z,1528919214.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:54.960Z,1528919214.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:55.352Z,1528919215.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:56.560Z,1528919216.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:56.682Z,1528919216.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:57.099Z,1528919217.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:57.502Z,1528919217.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:57.899Z,1528919217.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:58.300Z,1528919218.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:58.710Z,1528919218.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:59.076Z,1528919219.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:46:59.500Z,1528919219.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:00.669Z,1528919220.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:00.811Z,1528919220.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:01.215Z,1528919221.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:01.615Z,1528919221.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:02.014Z,1528919222.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:02.410Z,1528919222.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:02.812Z,1528919222.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:03.212Z,1528919223.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:03.602Z,1528919223.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:04.028Z,1528919224.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:04.410Z,1528919224.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:05.579Z,1528919225.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:05.758Z,1528919225.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:06.154Z,1528919226.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:06.562Z,1528919226.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:06.959Z,1528919226.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:07.332Z,1528919227.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:07.732Z,1528919227.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:08.136Z,1528919228.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:08.536Z,1528919228.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:08.963Z,1528919228.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:09.359Z,1528919229.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:10.527Z,1528919230.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:10.666Z,1528919230.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:11.074Z,1528919231.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:11.474Z,1528919231.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:11.879Z,1528919231.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:12.279Z,1528919232.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:12.670Z,1528919232.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:13.081Z,1528919233.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:13.463Z,1528919233.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:13.892Z,1528919233.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:15.036Z,1528919235.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:15.181Z,1528919235.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:15.581Z,1528919235.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:15.984Z,1528919235.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:16.381Z,1528919236.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:16.784Z,1528919236.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:17.157Z,1528919237.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:17.561Z,1528919237.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:17.992Z,1528919237.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:18.383Z,1528919238.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:19.548Z,1528919239.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:19.695Z,1528919239.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:20.097Z,1528919240.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:20.494Z,1528919240.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:20.894Z,1528919240.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:21.289Z,1528919241.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:21.706Z,1528919241.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:22.068Z,1528919242.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:22.472Z,1528919242.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:22.904Z,1528919242.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:24.102Z,1528919244.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:24.256Z,1528919244.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:24.669Z,1528919244.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:25.072Z,1528919245.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:25.466Z,1528919245.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:25.861Z,1528919245.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:26.231Z,1528919246.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:26.628Z,1528919246.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:27.119Z,1528919247.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:27.489Z,1528919247.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:28.973Z,1528919248.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:29.111Z,1528919249.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:29.527Z,1528919249.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:29.928Z,1528919249.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:30.321Z,1528919250.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:30.721Z,1528919250.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:31.121Z,1528919251.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:31.522Z,1528919251.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:31.930Z,1528919251.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:32.340Z,1528919252.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:33.476Z,1528919253.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:33.628Z,1528919253.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:34.034Z,1528919254.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:34.440Z,1528919254.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:34.835Z,1528919254.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:35.229Z,1528919255.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:35.616Z,1528919255.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:36.046Z,1528919256.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:36.431Z,1528919256.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:36.845Z,1528919256.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:38.012Z,1528919258.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:38.152Z,1528919258.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:38.549Z,1528919258.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:38.952Z,1528919258.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:39.355Z,1528919259.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:39.749Z,1528919259.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:40.152Z,1528919260.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:40.546Z,1528919260.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:40.960Z,1528919260.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:41.360Z,1528919261.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:42.598Z,1528919262.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:42.744Z,1528919262.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:43.148Z,1528919263.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:43.551Z,1528919263.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:43.946Z,1528919263.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:44.353Z,1528919264.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:44.758Z,1528919264.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:45.129Z,1528919265.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:45.552Z,1528919265.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:46.706Z,1528919266.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:46.706Z,1528919266.706 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 326
2018-06-13T19:47:46.706Z,1528919266.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:47:46.708Z,1528919266.708 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:46.708Z,1528919266.708 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 326
2018-06-13T19:47:46.708Z,1528919266.708 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:47:46.710Z,1528919266.710 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:46.710Z,1528919266.710 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 326
2018-06-13T19:47:46.710Z,1528919266.710 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:47:46.789Z,1528919266.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:47:46.789Z,1528919266.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:47:46.790Z,1528919266.790 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:47:46.961Z,1528919266.961 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:47:46.961Z,1528919266.961 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 326
2018-06-13T19:47:46.962Z,1528919266.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:47:46.962Z,1528919266.962 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 326
2018-06-13T19:47:46.962Z,1528919266.962 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:47:46.962Z,1528919266.962 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 326
2018-06-13T19:47:47.246Z,1528919267.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:47:47.247Z,1528919267.247 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:47:47.247Z,1528919267.247 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:47:47.247Z,1528919267.247 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:47:47.248Z,1528919267.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:47:47.248Z,1528919267.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:47:47.248Z,1528919267.248 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:47:47.249Z,1528919267.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:47:47.249Z,1528919267.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:47:47.637Z,1528919267.637 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T19:47:47.637Z,1528919267.637 [BPC1] Communications Fault, FailCount= 7
2018-06-13T19:47:47.637Z,1528919267.637 [BPC1](ERROR): Communications Fault
2018-06-13T19:47:47.647Z,1528919267.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2018-06-13T19:47:47.648Z,1528919267.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:47.741Z,1528919267.741 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T19:47:47.996Z,1528919267.996 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:47:48.056Z,1528919268.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-06-13T19:47:48.057Z,1528919268.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:48.454Z,1528919268.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T19:47:48.455Z,1528919268.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:48.843Z,1528919268.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T19:47:48.844Z,1528919268.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:48.917Z,1528919268.917 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T19:47:48.917Z,1528919268.917 [BPC1] No Fault, FailCount= 7
2018-06-13T19:47:49.296Z,1528919269.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T19:47:49.297Z,1528919269.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:49.642Z,1528919269.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T19:47:49.643Z,1528919269.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:50.078Z,1528919270.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T19:47:50.079Z,1528919270.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:50.456Z,1528919270.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T19:47:50.457Z,1528919270.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:51.633Z,1528919271.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T19:47:51.634Z,1528919271.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:51.795Z,1528919271.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-06-13T19:47:51.796Z,1528919271.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:52.189Z,1528919272.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T19:47:52.190Z,1528919272.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:52.589Z,1528919272.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T19:47:52.590Z,1528919272.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:52.990Z,1528919272.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T19:47:52.991Z,1528919272.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:53.384Z,1528919273.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T19:47:53.389Z,1528919273.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:53.802Z,1528919273.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T19:47:53.802Z,1528919273.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:54.165Z,1528919274.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T19:47:54.166Z,1528919274.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:54.568Z,1528919274.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T19:47:54.569Z,1528919274.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:54.998Z,1528919274.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T19:47:54.999Z,1528919274.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:56.139Z,1528919276.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T19:47:56.140Z,1528919276.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:56.277Z,1528919276.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T19:47:56.278Z,1528919276.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:56.675Z,1528919276.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T19:47:56.676Z,1528919276.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:57.078Z,1528919277.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T19:47:57.079Z,1528919277.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:57.479Z,1528919277.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T19:47:57.480Z,1528919277.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:57.870Z,1528919277.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T19:47:57.870Z,1528919277.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:58.272Z,1528919278.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T19:47:58.273Z,1528919278.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:58.671Z,1528919278.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T19:47:58.671Z,1528919278.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:59.099Z,1528919279.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T19:47:59.100Z,1528919279.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:47:59.476Z,1528919279.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T19:47:59.477Z,1528919279.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:00.657Z,1528919280.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:48:00.658Z,1528919280.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:00.787Z,1528919280.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T19:48:00.788Z,1528919280.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:01.215Z,1528919281.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T19:48:01.216Z,1528919281.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:01.616Z,1528919281.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T19:48:01.617Z,1528919281.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:02.016Z,1528919282.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T19:48:02.018Z,1528919282.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:02.396Z,1528919282.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T19:48:02.417Z,1528919282.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:02.797Z,1528919282.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T19:48:02.798Z,1528919282.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:03.191Z,1528919283.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T19:48:03.192Z,1528919283.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:03.595Z,1528919283.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T19:48:03.596Z,1528919283.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:04.032Z,1528919284.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T19:48:04.034Z,1528919284.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:04.418Z,1528919284.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T19:48:04.419Z,1528919284.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:05.632Z,1528919285.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T19:48:05.633Z,1528919285.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:05.783Z,1528919285.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T19:48:05.783Z,1528919285.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:06.192Z,1528919286.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T19:48:06.193Z,1528919286.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:06.592Z,1528919286.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T19:48:06.594Z,1528919286.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:06.996Z,1528919286.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:07.380Z,1528919287.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:07.801Z,1528919287.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:08.184Z,1528919288.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:08.594Z,1528919288.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:09.748Z,1528919289.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:09.896Z,1528919289.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:10.290Z,1528919290.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:10.685Z,1528919290.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:11.087Z,1528919291.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:11.484Z,1528919291.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:11.888Z,1528919291.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:12.284Z,1528919292.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:12.689Z,1528919292.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:13.096Z,1528919293.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:13.496Z,1528919293.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:14.666Z,1528919294.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:14.824Z,1528919294.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:15.250Z,1528919295.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:15.650Z,1528919295.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:16.052Z,1528919296.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:16.424Z,1528919296.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:16.825Z,1528919296.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:17.246Z,1528919297.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:17.647Z,1528919297.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:18.060Z,1528919298.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:18.435Z,1528919298.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:19.613Z,1528919299.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:19.763Z,1528919299.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:20.180Z,1528919300.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:20.572Z,1528919300.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:20.974Z,1528919300.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:21.360Z,1528919301.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:21.762Z,1528919301.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:22.176Z,1528919302.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:22.573Z,1528919302.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:23.765Z,1528919303.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:23.919Z,1528919303.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:24.320Z,1528919304.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:24.722Z,1528919304.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:25.122Z,1528919305.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:25.520Z,1528919305.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:25.923Z,1528919305.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:26.313Z,1528919306.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:26.717Z,1528919306.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:27.128Z,1528919307.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:27.518Z,1528919307.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:28.762Z,1528919308.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:28.883Z,1528919308.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:29.312Z,1528919309.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:29.718Z,1528919309.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:30.112Z,1528919310.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:30.513Z,1528919310.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:30.921Z,1528919310.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:31.288Z,1528919311.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:31.696Z,1528919311.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:32.123Z,1528919312.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:32.519Z,1528919312.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:33.724Z,1528919313.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:33.876Z,1528919313.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:34.277Z,1528919314.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:34.679Z,1528919314.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:35.082Z,1528919315.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:35.464Z,1528919315.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:35.880Z,1528919315.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:36.277Z,1528919316.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:36.710Z,1528919316.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:37.089Z,1528919317.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:37.551Z,1528919317.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:39.209Z,1528919319.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:39.391Z,1528919319.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:39.789Z,1528919319.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:40.191Z,1528919320.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:40.591Z,1528919320.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:40.985Z,1528919320.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:41.387Z,1528919321.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:41.784Z,1528919321.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:42.202Z,1528919322.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:42.599Z,1528919322.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:43.767Z,1528919323.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:44.004Z,1528919324.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:44.395Z,1528919324.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:44.802Z,1528919324.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:45.208Z,1528919325.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:45.576Z,1528919325.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:45.981Z,1528919325.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:46.380Z,1528919326.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:46.776Z,1528919326.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:47.211Z,1528919327.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:47.611Z,1528919327.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:48.873Z,1528919328.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:48.957Z,1528919328.957 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:48:49.021Z,1528919329.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:49.419Z,1528919329.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:49.859Z,1528919329.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:50.218Z,1528919330.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:50.608Z,1528919330.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:51.016Z,1528919331.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:51.411Z,1528919331.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:51.816Z,1528919331.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:52.227Z,1528919332.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:52.624Z,1528919332.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:53.832Z,1528919333.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:54.019Z,1528919334.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:54.416Z,1528919334.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:54.824Z,1528919334.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:55.219Z,1528919335.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:55.624Z,1528919335.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:56.024Z,1528919336.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:56.422Z,1528919336.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:56.791Z,1528919336.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:57.233Z,1528919337.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:57.604Z,1528919337.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:58.826Z,1528919338.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:58.975Z,1528919338.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:59.370Z,1528919339.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:48:59.776Z,1528919339.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:00.170Z,1528919340.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:00.551Z,1528919340.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:00.965Z,1528919340.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:01.352Z,1528919341.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:01.756Z,1528919341.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:02.183Z,1528919342.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:02.579Z,1528919342.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:03.748Z,1528919343.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:03.887Z,1528919343.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:04.295Z,1528919344.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:04.706Z,1528919344.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:05.091Z,1528919345.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:05.489Z,1528919345.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:05.902Z,1528919345.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:06.293Z,1528919346.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:06.682Z,1528919346.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:07.107Z,1528919347.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:08.256Z,1528919348.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:08.417Z,1528919348.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:08.817Z,1528919348.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:09.224Z,1528919349.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:09.602Z,1528919349.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:09.996Z,1528919349.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:10.408Z,1528919350.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:10.801Z,1528919350.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:11.249Z,1528919351.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:11.678Z,1528919351.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:14.025Z,1528919354.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:14.163Z,1528919354.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:14.585Z,1528919354.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:14.992Z,1528919354.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:15.390Z,1528919355.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:15.785Z,1528919355.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:16.157Z,1528919356.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:16.589Z,1528919356.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:16.996Z,1528919356.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:17.382Z,1528919357.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:18.547Z,1528919358.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:18.727Z,1528919358.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:19.123Z,1528919359.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:19.507Z,1528919359.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:19.948Z,1528919359.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:20.330Z,1528919360.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:20.700Z,1528919360.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:21.139Z,1528919361.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:21.543Z,1528919361.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:22.728Z,1528919362.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:22.864Z,1528919362.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:23.288Z,1528919363.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:23.688Z,1528919363.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:24.092Z,1528919364.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:24.489Z,1528919364.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:24.892Z,1528919364.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:25.289Z,1528919365.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:26.451Z,1528919366.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:26.595Z,1528919366.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:27.004Z,1528919367.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:27.420Z,1528919367.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:27.799Z,1528919367.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:28.193Z,1528919368.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:28.591Z,1528919368.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:29.009Z,1528919369.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:29.388Z,1528919369.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:29.801Z,1528919369.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:30.969Z,1528919370.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:31.128Z,1528919371.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:31.518Z,1528919371.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:31.927Z,1528919371.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:32.356Z,1528919372.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:32.716Z,1528919372.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:33.121Z,1528919373.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:33.508Z,1528919373.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:33.928Z,1528919373.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:34.323Z,1528919374.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:35.540Z,1528919375.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:35.712Z,1528919375.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:36.115Z,1528919376.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:36.528Z,1528919376.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:36.924Z,1528919376.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:37.296Z,1528919377.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:37.696Z,1528919377.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:38.143Z,1528919378.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:38.536Z,1528919378.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:39.683Z,1528919379.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:39.826Z,1528919379.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:40.235Z,1528919380.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:40.631Z,1528919380.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:41.026Z,1528919381.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:41.422Z,1528919381.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:41.823Z,1528919381.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:42.238Z,1528919382.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:42.627Z,1528919382.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:43.781Z,1528919383.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:43.918Z,1528919383.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:44.326Z,1528919384.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:44.729Z,1528919384.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:45.130Z,1528919385.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:45.526Z,1528919385.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:45.939Z,1528919385.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:46.327Z,1528919386.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:46.731Z,1528919386.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:47.904Z,1528919387.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:48.088Z,1528919388.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:48.485Z,1528919388.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:48.816Z,1528919388.816 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:49:48.896Z,1528919388.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:49.300Z,1528919389.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:49.683Z,1528919389.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:50.087Z,1528919390.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:50.481Z,1528919390.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:50.864Z,1528919390.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:51.297Z,1528919391.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:51.850Z,1528919391.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:53.964Z,1528919393.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:54.118Z,1528919394.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:54.543Z,1528919394.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:54.948Z,1528919394.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:55.355Z,1528919395.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:55.744Z,1528919395.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:56.128Z,1528919396.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:56.526Z,1528919396.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:56.960Z,1528919396.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:57.341Z,1528919397.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:58.502Z,1528919398.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:58.628Z,1528919398.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:59.061Z,1528919399.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:59.464Z,1528919399.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:49:59.840Z,1528919399.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:00.232Z,1528919400.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:00.629Z,1528919400.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:01.064Z,1528919401.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:01.446Z,1528919401.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:02.618Z,1528919402.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:02.775Z,1528919402.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:03.174Z,1528919403.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:03.571Z,1528919403.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:03.973Z,1528919403.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:04.350Z,1528919404.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:04.748Z,1528919404.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:05.175Z,1528919405.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:05.571Z,1528919405.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:06.721Z,1528919406.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:06.876Z,1528919406.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:07.280Z,1528919407.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:07.679Z,1528919407.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:08.075Z,1528919408.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:08.476Z,1528919408.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:08.853Z,1528919408.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:09.296Z,1528919409.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:09.666Z,1528919409.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:10.087Z,1528919410.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:11.255Z,1528919411.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:11.418Z,1528919411.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:11.840Z,1528919411.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:12.248Z,1528919412.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:12.640Z,1528919412.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:13.034Z,1528919413.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:13.438Z,1528919413.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:13.836Z,1528919413.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:14.264Z,1528919414.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:14.642Z,1528919414.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:15.839Z,1528919415.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:15.997Z,1528919415.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:16.401Z,1528919416.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:16.792Z,1528919416.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:17.190Z,1528919417.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:17.593Z,1528919417.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:18.006Z,1528919418.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:18.372Z,1528919418.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:18.804Z,1528919418.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:19.949Z,1528919419.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:20.099Z,1528919420.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:20.496Z,1528919420.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:20.891Z,1528919420.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:21.295Z,1528919421.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:21.686Z,1528919421.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:22.084Z,1528919422.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:22.488Z,1528919422.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:22.888Z,1528919422.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:23.323Z,1528919423.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:23.695Z,1528919423.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:24.873Z,1528919424.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:25.011Z,1528919425.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:25.438Z,1528919425.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:25.852Z,1528919425.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:26.230Z,1528919426.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:26.630Z,1528919426.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:27.045Z,1528919427.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:27.421Z,1528919427.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:27.835Z,1528919427.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:29.001Z,1528919429.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:29.174Z,1528919429.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:29.556Z,1528919429.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:29.955Z,1528919429.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:30.355Z,1528919430.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:30.753Z,1528919430.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:31.146Z,1528919431.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:31.670Z,1528919431.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:31.984Z,1528919431.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:32.419Z,1528919432.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:32.874Z,1528919432.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:34.509Z,1528919434.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:34.628Z,1528919434.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:35.062Z,1528919435.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:35.468Z,1528919435.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:35.858Z,1528919435.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:36.246Z,1528919436.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:36.636Z,1528919436.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:37.069Z,1528919437.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:37.464Z,1528919437.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:38.610Z,1528919438.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:38.767Z,1528919438.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:39.168Z,1528919439.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:39.568Z,1528919439.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:39.966Z,1528919439.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:40.360Z,1528919440.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:40.762Z,1528919440.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:41.179Z,1528919441.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:41.574Z,1528919441.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:42.747Z,1528919442.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:42.923Z,1528919442.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:43.312Z,1528919443.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:43.728Z,1528919443.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:44.119Z,1528919444.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:44.497Z,1528919444.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:44.897Z,1528919444.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:45.327Z,1528919445.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:45.723Z,1528919445.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:46.875Z,1528919446.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:47.007Z,1528919447.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:47.440Z,1528919447.440 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:47.440Z,1528919447.440 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 327
2018-06-13T19:50:47.440Z,1528919447.440 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:50:47.442Z,1528919447.442 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:47.442Z,1528919447.442 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 327
2018-06-13T19:50:47.442Z,1528919447.442 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:50:47.444Z,1528919447.444 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:47.444Z,1528919447.444 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 327
2018-06-13T19:50:47.444Z,1528919447.444 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:50:47.518Z,1528919447.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:50:47.518Z,1528919447.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:50:47.518Z,1528919447.518 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:50:47.930Z,1528919447.930 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:50:47.930Z,1528919447.930 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 327
2018-06-13T19:50:47.931Z,1528919447.931 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:50:47.931Z,1528919447.931 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 327
2018-06-13T19:50:47.931Z,1528919447.931 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:50:47.932Z,1528919447.932 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 327
2018-06-13T19:50:48.250Z,1528919448.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:50:48.251Z,1528919448.251 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:50:48.253Z,1528919448.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:50:48.255Z,1528919448.255 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:50:48.256Z,1528919448.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:50:48.256Z,1528919448.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:50:48.256Z,1528919448.256 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:50:48.257Z,1528919448.257 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:50:48.257Z,1528919448.257 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:50:48.636Z,1528919448.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:50:48.636Z,1528919448.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:48.968Z,1528919448.968 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:50:49.041Z,1528919449.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:50:49.042Z,1528919449.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:49.414Z,1528919449.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:50:49.414Z,1528919449.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:49.847Z,1528919449.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:50:49.847Z,1528919449.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:51.005Z,1528919451.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:50:51.006Z,1528919451.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:51.159Z,1528919451.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T19:50:51.160Z,1528919451.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:51.558Z,1528919451.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T19:50:51.559Z,1528919451.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:51.956Z,1528919451.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T19:50:51.957Z,1528919451.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:52.354Z,1528919452.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T19:50:52.355Z,1528919452.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:52.753Z,1528919452.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T19:50:52.754Z,1528919452.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:53.154Z,1528919453.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T19:50:53.155Z,1528919453.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:53.550Z,1528919453.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T19:50:53.551Z,1528919453.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:53.949Z,1528919453.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T19:50:53.950Z,1528919453.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:54.359Z,1528919454.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T19:50:54.360Z,1528919454.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:54.758Z,1528919454.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T19:50:54.759Z,1528919454.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:55.947Z,1528919455.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T19:50:55.948Z,1528919455.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:56.107Z,1528919456.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T19:50:56.108Z,1528919456.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:56.498Z,1528919456.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T19:50:56.499Z,1528919456.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:56.901Z,1528919456.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T19:50:56.902Z,1528919456.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:57.301Z,1528919457.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T19:50:57.302Z,1528919457.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:57.696Z,1528919457.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T19:50:57.701Z,1528919457.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:58.097Z,1528919458.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T19:50:58.098Z,1528919458.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:58.476Z,1528919458.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T19:50:58.477Z,1528919458.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:58.907Z,1528919458.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T19:50:58.908Z,1528919458.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:59.317Z,1528919459.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T19:50:59.318Z,1528919459.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:50:59.714Z,1528919459.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T19:50:59.715Z,1528919459.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:00.913Z,1528919460.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-06-13T19:51:00.914Z,1528919460.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:01.039Z,1528919461.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:51:01.040Z,1528919461.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:01.468Z,1528919461.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:51:01.468Z,1528919461.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:01.880Z,1528919461.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T19:51:01.881Z,1528919461.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:02.272Z,1528919462.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:51:02.273Z,1528919462.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:02.644Z,1528919462.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:51:02.646Z,1528919462.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:03.082Z,1528919463.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:51:03.082Z,1528919463.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:03.444Z,1528919463.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:51:03.445Z,1528919463.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:03.874Z,1528919463.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:51:03.875Z,1528919463.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:05.025Z,1528919465.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:51:05.026Z,1528919465.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:05.183Z,1528919465.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T19:51:05.184Z,1528919465.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:05.574Z,1528919465.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T19:51:05.575Z,1528919465.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:05.978Z,1528919465.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T19:51:05.978Z,1528919465.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:06.384Z,1528919466.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T19:51:06.385Z,1528919466.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:06.768Z,1528919466.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T19:51:06.773Z,1528919466.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:07.181Z,1528919467.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T19:51:07.182Z,1528919467.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:07.557Z,1528919467.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:07.958Z,1528919467.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:08.386Z,1528919468.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:08.791Z,1528919468.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:09.952Z,1528919469.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:10.121Z,1528919470.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:10.527Z,1528919470.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:10.927Z,1528919470.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:11.307Z,1528919471.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:11.700Z,1528919471.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:12.100Z,1528919472.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:12.498Z,1528919472.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:12.904Z,1528919472.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:13.331Z,1528919473.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:13.707Z,1528919473.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:14.882Z,1528919474.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:15.044Z,1528919475.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:15.456Z,1528919475.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:15.870Z,1528919475.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:16.252Z,1528919476.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:16.632Z,1528919476.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:17.035Z,1528919477.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:17.453Z,1528919477.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:17.840Z,1528919477.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:18.244Z,1528919478.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:19.447Z,1528919479.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:19.604Z,1528919479.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:19.993Z,1528919479.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:20.397Z,1528919480.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:20.794Z,1528919480.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:21.186Z,1528919481.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:21.592Z,1528919481.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:21.988Z,1528919481.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:22.404Z,1528919482.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:22.798Z,1528919482.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:23.996Z,1528919483.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:24.147Z,1528919484.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:24.549Z,1528919484.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:24.950Z,1528919484.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:25.351Z,1528919485.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:25.740Z,1528919485.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:26.148Z,1528919486.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:26.538Z,1528919486.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:26.942Z,1528919486.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:27.357Z,1528919487.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:27.750Z,1528919487.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:28.936Z,1528919488.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:29.081Z,1528919489.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:29.495Z,1528919489.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:29.898Z,1528919489.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:30.296Z,1528919490.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:30.694Z,1528919490.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:31.105Z,1528919491.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:31.472Z,1528919491.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:31.908Z,1528919491.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:33.060Z,1528919493.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:33.209Z,1528919493.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:33.602Z,1528919493.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:34.002Z,1528919494.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:34.413Z,1528919494.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:34.800Z,1528919494.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:35.202Z,1528919495.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:35.578Z,1528919495.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:35.984Z,1528919495.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:36.413Z,1528919496.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:36.810Z,1528919496.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:37.970Z,1528919497.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:38.108Z,1528919498.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:38.513Z,1528919498.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:38.915Z,1528919498.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:39.314Z,1528919499.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:39.711Z,1528919499.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:40.126Z,1528919500.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:40.513Z,1528919500.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:40.914Z,1528919500.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:41.319Z,1528919501.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:42.477Z,1528919502.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:42.615Z,1528919502.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:43.027Z,1528919503.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:43.426Z,1528919503.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:43.825Z,1528919503.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:44.215Z,1528919504.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:44.620Z,1528919504.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:45.020Z,1528919505.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:45.432Z,1528919505.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:45.827Z,1528919505.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:47.912Z,1528919507.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:48.072Z,1528919508.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:48.469Z,1528919508.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:48.869Z,1528919508.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:49.271Z,1528919509.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:49.608Z,1528919509.608 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:51:49.673Z,1528919509.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:50.066Z,1528919510.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:50.477Z,1528919510.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:50.876Z,1528919510.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:52.070Z,1528919512.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:52.231Z,1528919512.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:52.627Z,1528919512.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:53.028Z,1528919513.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:53.426Z,1528919513.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:53.828Z,1528919513.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:54.226Z,1528919514.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:54.602Z,1528919514.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:55.006Z,1528919515.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:55.442Z,1528919515.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:55.834Z,1528919515.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:57.042Z,1528919517.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:57.170Z,1528919517.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:57.597Z,1528919517.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:57.990Z,1528919517.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:58.389Z,1528919518.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:58.789Z,1528919518.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:59.185Z,1528919519.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:59.568Z,1528919519.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:51:59.984Z,1528919519.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:00.405Z,1528919520.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:00.796Z,1528919520.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:02.001Z,1528919522.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:02.164Z,1528919522.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:02.553Z,1528919522.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:02.956Z,1528919522.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:03.354Z,1528919523.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:03.754Z,1528919523.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:04.169Z,1528919524.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:04.541Z,1528919524.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:04.958Z,1528919524.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:06.116Z,1528919526.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:06.263Z,1528919526.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:06.663Z,1528919526.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:07.060Z,1528919527.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:07.463Z,1528919527.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:07.859Z,1528919527.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:08.260Z,1528919528.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:08.657Z,1528919528.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:09.057Z,1528919529.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:09.474Z,1528919529.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:09.872Z,1528919529.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:11.031Z,1528919531.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:11.183Z,1528919531.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:11.611Z,1528919531.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:12.011Z,1528919532.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:12.403Z,1528919532.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:12.783Z,1528919532.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:13.183Z,1528919533.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:13.583Z,1528919533.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:13.985Z,1528919533.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:14.414Z,1528919534.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:14.811Z,1528919534.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:15.980Z,1528919535.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:16.144Z,1528919536.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:16.544Z,1528919536.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:16.943Z,1528919536.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:17.348Z,1528919537.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:17.732Z,1528919537.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:18.171Z,1528919538.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:18.532Z,1528919538.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:18.948Z,1528919538.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:20.141Z,1528919540.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:20.288Z,1528919540.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:20.682Z,1528919540.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:21.093Z,1528919541.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:21.486Z,1528919541.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:21.911Z,1528919541.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:22.276Z,1528919542.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:22.751Z,1528919542.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:23.116Z,1528919543.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:23.511Z,1528919543.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:23.885Z,1528919543.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:25.326Z,1528919545.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:25.468Z,1528919545.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:25.871Z,1528919545.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:26.273Z,1528919546.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:26.676Z,1528919546.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:27.048Z,1528919547.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:27.452Z,1528919547.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:27.854Z,1528919547.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:28.279Z,1528919548.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:28.675Z,1528919548.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:29.832Z,1528919549.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:29.980Z,1528919549.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:30.388Z,1528919550.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:30.778Z,1528919550.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:31.176Z,1528919551.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:31.574Z,1528919551.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:31.969Z,1528919551.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:32.388Z,1528919552.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:32.784Z,1528919552.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:33.934Z,1528919553.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:34.092Z,1528919554.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:34.478Z,1528919554.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:34.882Z,1528919554.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:35.284Z,1528919555.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:35.679Z,1528919555.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:36.071Z,1528919556.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:36.487Z,1528919556.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:36.882Z,1528919556.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:38.039Z,1528919558.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:38.214Z,1528919558.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:38.595Z,1528919558.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:38.995Z,1528919558.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:39.391Z,1528919559.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:39.792Z,1528919559.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:40.212Z,1528919560.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:40.585Z,1528919560.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:40.995Z,1528919560.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:42.181Z,1528919562.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:42.320Z,1528919562.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:42.727Z,1528919562.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:43.123Z,1528919563.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:43.521Z,1528919563.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:43.925Z,1528919563.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:44.317Z,1528919564.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:44.721Z,1528919564.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:45.106Z,1528919565.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:45.536Z,1528919565.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:45.931Z,1528919565.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:47.094Z,1528919567.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:47.244Z,1528919567.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:47.649Z,1528919567.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:48.050Z,1528919568.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:48.450Z,1528919568.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:48.838Z,1528919568.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:49.239Z,1528919569.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:49.638Z,1528919569.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:50.038Z,1528919570.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:50.388Z,1528919570.388 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:52:50.462Z,1528919570.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:50.848Z,1528919570.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:52.016Z,1528919572.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:52.192Z,1528919572.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:52.596Z,1528919572.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:53.001Z,1528919573.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:53.396Z,1528919573.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:53.768Z,1528919573.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:54.169Z,1528919574.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:54.605Z,1528919574.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:54.992Z,1528919574.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:56.153Z,1528919576.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:56.304Z,1528919576.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:56.700Z,1528919576.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:57.098Z,1528919577.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:57.497Z,1528919577.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:57.896Z,1528919577.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:58.296Z,1528919578.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:58.672Z,1528919578.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:59.100Z,1528919579.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:59.506Z,1528919579.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:52:59.902Z,1528919579.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:01.075Z,1528919581.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:01.219Z,1528919581.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:01.632Z,1528919581.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:02.027Z,1528919582.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:02.428Z,1528919582.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:02.819Z,1528919582.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:03.256Z,1528919583.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:03.623Z,1528919583.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:04.022Z,1528919584.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:04.432Z,1528919584.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:05.627Z,1528919585.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:05.800Z,1528919585.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:06.183Z,1528919586.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:06.580Z,1528919586.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:06.980Z,1528919586.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:07.373Z,1528919587.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:07.773Z,1528919587.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:08.174Z,1528919588.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:08.604Z,1528919588.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:08.984Z,1528919588.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:10.183Z,1528919590.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:10.357Z,1528919590.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:10.736Z,1528919590.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:11.139Z,1528919591.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:11.539Z,1528919591.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:11.936Z,1528919591.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:12.330Z,1528919592.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:12.730Z,1528919592.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:13.130Z,1528919593.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:13.561Z,1528919593.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:13.960Z,1528919593.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:15.129Z,1528919595.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:15.285Z,1528919595.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:15.677Z,1528919595.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:16.084Z,1528919596.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:16.478Z,1528919596.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:16.865Z,1528919596.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:17.284Z,1528919597.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:17.676Z,1528919597.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:18.065Z,1528919598.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:18.484Z,1528919598.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:19.638Z,1528919599.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:19.811Z,1528919599.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:20.187Z,1528919600.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:20.598Z,1528919600.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:20.992Z,1528919600.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:21.384Z,1528919601.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:21.784Z,1528919601.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:22.185Z,1528919602.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:22.600Z,1528919602.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:22.996Z,1528919602.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:24.179Z,1528919604.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:24.332Z,1528919604.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:24.730Z,1528919604.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:25.132Z,1528919605.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:25.531Z,1528919605.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:25.921Z,1528919605.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:26.325Z,1528919606.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:26.709Z,1528919606.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:27.113Z,1528919607.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:27.543Z,1528919607.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:27.940Z,1528919607.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:29.108Z,1528919609.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:29.258Z,1528919609.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:29.656Z,1528919609.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:30.054Z,1528919610.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:30.457Z,1528919610.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:30.848Z,1528919610.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:31.248Z,1528919611.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:31.663Z,1528919611.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:32.052Z,1528919612.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:32.460Z,1528919612.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:33.605Z,1528919613.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:33.749Z,1528919613.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:34.153Z,1528919614.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:34.568Z,1528919614.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:34.952Z,1528919614.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:35.345Z,1528919615.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:35.747Z,1528919615.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:36.145Z,1528919616.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:36.564Z,1528919616.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:36.959Z,1528919616.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:38.171Z,1528919618.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:38.352Z,1528919618.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:38.750Z,1528919618.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:39.160Z,1528919619.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:39.556Z,1528919619.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:39.941Z,1528919619.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:40.353Z,1528919620.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:40.746Z,1528919620.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:41.152Z,1528919621.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:41.568Z,1528919621.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:41.960Z,1528919621.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:43.164Z,1528919623.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:43.300Z,1528919623.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:43.715Z,1528919623.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:44.120Z,1528919624.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:44.516Z,1528919624.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:44.915Z,1528919624.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:45.325Z,1528919625.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:45.692Z,1528919625.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:46.118Z,1528919626.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:47.275Z,1528919627.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:47.430Z,1528919627.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:47.831Z,1528919627.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:48.227Z,1528919628.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:48.633Z,1528919628.633 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:48.633Z,1528919628.633 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 328
2018-06-13T19:53:48.633Z,1528919628.633 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:53:48.635Z,1528919628.635 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:48.635Z,1528919628.635 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 328
2018-06-13T19:53:48.635Z,1528919628.635 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:53:48.637Z,1528919628.637 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:48.637Z,1528919628.637 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 328
2018-06-13T19:53:48.637Z,1528919628.637 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:53:48.709Z,1528919628.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:53:48.710Z,1528919628.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:53:48.710Z,1528919628.710 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:53:49.121Z,1528919629.121 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:53:49.121Z,1528919629.121 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 328
2018-06-13T19:53:49.122Z,1528919629.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:53:49.122Z,1528919629.122 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 328
2018-06-13T19:53:49.122Z,1528919629.122 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:53:49.122Z,1528919629.122 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 328
2018-06-13T19:53:49.431Z,1528919629.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:53:49.432Z,1528919629.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:53:49.432Z,1528919629.432 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:53:49.432Z,1528919629.432 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:53:49.437Z,1528919629.437 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:53:49.437Z,1528919629.437 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:53:49.438Z,1528919629.438 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:53:49.438Z,1528919629.438 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:53:49.438Z,1528919629.438 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:53:49.808Z,1528919629.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:53:49.808Z,1528919629.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:50.214Z,1528919630.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:53:50.215Z,1528919630.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:50.568Z,1528919630.568 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:53:50.648Z,1528919630.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:53:50.653Z,1528919630.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:51.023Z,1528919631.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:53:51.024Z,1528919631.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:52.201Z,1528919632.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:53:52.202Z,1528919632.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:52.358Z,1528919632.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T19:53:52.359Z,1528919632.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:52.752Z,1528919632.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T19:53:52.754Z,1528919632.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:53.158Z,1528919633.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T19:53:53.159Z,1528919633.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:53.564Z,1528919633.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T19:53:53.569Z,1528919633.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:53.952Z,1528919633.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T19:53:53.953Z,1528919633.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:54.339Z,1528919634.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T19:53:54.340Z,1528919634.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:54.736Z,1528919634.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T19:53:54.737Z,1528919634.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:55.141Z,1528919635.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T19:53:55.142Z,1528919635.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:55.571Z,1528919635.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T19:53:55.572Z,1528919635.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:55.966Z,1528919635.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T19:53:55.967Z,1528919635.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:57.123Z,1528919637.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T19:53:57.124Z,1528919637.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:57.283Z,1528919637.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T19:53:57.284Z,1528919637.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:57.677Z,1528919637.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T19:53:57.679Z,1528919637.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:58.080Z,1528919638.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T19:53:58.081Z,1528919638.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:58.482Z,1528919638.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T19:53:58.483Z,1528919638.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:58.876Z,1528919638.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T19:53:58.877Z,1528919638.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:59.289Z,1528919639.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T19:53:59.290Z,1528919639.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:53:59.692Z,1528919639.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T19:53:59.693Z,1528919639.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:00.088Z,1528919640.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T19:54:00.088Z,1528919640.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:00.509Z,1528919640.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T19:54:00.510Z,1528919640.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:01.635Z,1528919641.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T19:54:01.636Z,1528919641.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:01.789Z,1528919641.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T19:54:01.790Z,1528919641.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:02.187Z,1528919642.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:54:02.188Z,1528919642.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:02.618Z,1528919642.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:54:02.619Z,1528919642.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:02.994Z,1528919642.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T19:54:02.995Z,1528919642.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:03.387Z,1528919643.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:54:03.388Z,1528919643.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:03.787Z,1528919643.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:54:03.788Z,1528919643.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:04.186Z,1528919644.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:54:04.187Z,1528919644.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:04.623Z,1528919644.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:54:04.624Z,1528919644.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:04.996Z,1528919644.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:54:04.996Z,1528919644.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:06.222Z,1528919646.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:54:06.223Z,1528919646.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:06.395Z,1528919646.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T19:54:06.396Z,1528919646.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:06.866Z,1528919646.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T19:54:06.867Z,1528919646.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:07.182Z,1528919647.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T19:54:07.183Z,1528919647.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:07.693Z,1528919647.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T19:54:07.694Z,1528919647.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:07.976Z,1528919647.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T19:54:07.977Z,1528919647.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:08.370Z,1528919648.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T19:54:08.371Z,1528919648.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:08.772Z,1528919648.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:09.173Z,1528919649.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:09.606Z,1528919649.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:09.978Z,1528919649.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:11.304Z,1528919651.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:11.435Z,1528919651.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:11.867Z,1528919651.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:12.267Z,1528919652.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:12.672Z,1528919652.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:13.069Z,1528919653.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:13.461Z,1528919653.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:13.842Z,1528919653.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:14.272Z,1528919654.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:14.684Z,1528919654.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:15.071Z,1528919655.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:16.248Z,1528919656.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:16.435Z,1528919656.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:16.836Z,1528919656.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:17.233Z,1528919657.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:17.635Z,1528919657.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:18.024Z,1528919658.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:18.432Z,1528919658.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:18.804Z,1528919658.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:19.221Z,1528919659.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:19.644Z,1528919659.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:20.039Z,1528919660.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:21.238Z,1528919661.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:21.375Z,1528919661.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:21.793Z,1528919661.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:22.194Z,1528919662.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:22.602Z,1528919662.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:22.986Z,1528919662.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:23.406Z,1528919663.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:23.789Z,1528919663.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:24.205Z,1528919664.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:25.347Z,1528919665.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:25.495Z,1528919665.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:25.899Z,1528919665.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:26.309Z,1528919666.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:26.684Z,1528919666.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:27.074Z,1528919667.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:27.478Z,1528919667.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:27.875Z,1528919667.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:28.275Z,1528919668.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:28.709Z,1528919668.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:29.104Z,1528919669.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:30.280Z,1528919670.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:30.453Z,1528919670.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:30.836Z,1528919670.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:31.235Z,1528919671.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:31.635Z,1528919671.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:32.028Z,1528919672.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:32.424Z,1528919672.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:32.824Z,1528919672.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:33.224Z,1528919673.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:33.654Z,1528919673.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:34.035Z,1528919674.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:35.210Z,1528919675.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:35.349Z,1528919675.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:35.759Z,1528919675.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:36.165Z,1528919676.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:36.565Z,1528919676.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:36.960Z,1528919676.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:37.372Z,1528919677.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:37.768Z,1528919677.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:38.162Z,1528919678.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:39.318Z,1528919679.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:39.458Z,1528919679.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:39.873Z,1528919679.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:40.274Z,1528919680.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:40.679Z,1528919680.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:41.069Z,1528919681.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:41.469Z,1528919681.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:41.877Z,1528919681.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:42.260Z,1528919682.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:42.687Z,1528919682.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:43.083Z,1528919683.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:44.285Z,1528919684.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:44.444Z,1528919684.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:44.845Z,1528919684.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:45.238Z,1528919685.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:45.640Z,1528919685.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:46.036Z,1528919686.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:46.439Z,1528919686.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:46.834Z,1528919686.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:47.238Z,1528919687.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:47.651Z,1528919687.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:48.051Z,1528919688.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:49.251Z,1528919689.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:49.391Z,1528919689.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:49.807Z,1528919689.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:50.216Z,1528919690.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:50.607Z,1528919690.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:51.008Z,1528919691.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:51.346Z,1528919691.346 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:54:51.423Z,1528919691.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:51.780Z,1528919691.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:52.215Z,1528919692.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:53.373Z,1528919693.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:53.532Z,1528919693.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:53.925Z,1528919693.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:54.320Z,1528919694.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:54.728Z,1528919694.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:55.108Z,1528919695.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:55.520Z,1528919695.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:55.910Z,1528919695.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:56.308Z,1528919696.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:56.724Z,1528919696.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:57.122Z,1528919697.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:58.283Z,1528919698.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:58.454Z,1528919698.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:58.858Z,1528919698.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:59.257Z,1528919699.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:54:59.659Z,1528919699.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:00.032Z,1528919700.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:00.431Z,1528919700.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:00.831Z,1528919700.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:01.237Z,1528919701.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:01.662Z,1528919701.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:02.055Z,1528919702.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:03.225Z,1528919703.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:03.379Z,1528919703.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:03.778Z,1528919703.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:04.172Z,1528919704.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:04.579Z,1528919704.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:04.968Z,1528919704.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:05.366Z,1528919705.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:05.782Z,1528919705.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:06.172Z,1528919706.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:06.575Z,1528919706.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:07.729Z,1528919707.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:07.851Z,1528919707.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:08.226Z,1528919708.226 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T19:55:08.226Z,1528919708.226 [NAL9602] Data Fault, FailCount= 5
2018-06-13T19:55:08.227Z,1528919708.227 [NAL9602](ERROR): Data Fault
2018-06-13T19:55:08.282Z,1528919708.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:08.369Z,1528919708.369 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T19:55:08.369Z,1528919708.369 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T19:55:08.618Z,1528919708.618 [NAL9602](INFO): Powering down
2018-06-13T19:55:08.654Z,1528919708.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:08.739Z,1528919708.739 [CBIT](INFO): Critical error at 20180613T195508
2018-06-13T19:55:09.058Z,1528919709.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:09.460Z,1528919709.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:09.854Z,1528919709.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:10.261Z,1528919710.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:10.699Z,1528919710.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:11.060Z,1528919711.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:11.499Z,1528919711.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:11.902Z,1528919711.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:12.303Z,1528919712.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:12.708Z,1528919712.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:13.084Z,1528919713.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:13.464Z,1528919713.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:13.884Z,1528919713.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:14.311Z,1528919714.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:14.668Z,1528919714.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:15.063Z,1528919715.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:15.464Z,1528919715.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:15.860Z,1528919715.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:16.272Z,1528919716.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:16.749Z,1528919716.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:17.052Z,1528919717.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:17.564Z,1528919717.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:17.852Z,1528919717.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:18.366Z,1528919718.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:18.681Z,1528919718.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:19.066Z,1528919719.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:19.460Z,1528919719.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:19.863Z,1528919719.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:20.262Z,1528919720.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:20.660Z,1528919720.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:21.061Z,1528919721.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:21.466Z,1528919721.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:21.862Z,1528919721.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:22.261Z,1528919722.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:22.666Z,1528919722.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:23.062Z,1528919723.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:23.463Z,1528919723.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:23.862Z,1528919723.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:24.266Z,1528919724.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:24.662Z,1528919724.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:25.063Z,1528919725.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:25.450Z,1528919725.450 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T19:55:25.451Z,1528919725.451 [BPC1] Communications Fault, FailCount= 8
2018-06-13T19:55:25.451Z,1528919725.451 [BPC1](ERROR): Communications Fault
2018-06-13T19:55:25.461Z,1528919725.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:25.541Z,1528919725.541 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T19:55:25.862Z,1528919725.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:26.266Z,1528919726.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:26.662Z,1528919726.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:26.737Z,1528919726.737 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T19:55:26.737Z,1528919726.737 [BPC1] No Fault, FailCount= 8
2018-06-13T19:55:27.109Z,1528919727.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:27.467Z,1528919727.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:27.859Z,1528919727.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:28.265Z,1528919728.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:28.663Z,1528919728.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:29.065Z,1528919729.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:29.472Z,1528919729.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:29.863Z,1528919729.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:30.262Z,1528919730.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:30.665Z,1528919730.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:31.066Z,1528919731.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:31.458Z,1528919731.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:31.861Z,1528919731.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:32.275Z,1528919732.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:32.660Z,1528919732.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:33.065Z,1528919733.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:33.461Z,1528919733.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:33.860Z,1528919733.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:34.265Z,1528919734.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:34.666Z,1528919734.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:35.063Z,1528919735.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:35.464Z,1528919735.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:35.863Z,1528919735.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:36.266Z,1528919736.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:36.663Z,1528919736.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:37.066Z,1528919737.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:37.463Z,1528919737.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:37.865Z,1528919737.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:38.262Z,1528919738.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:38.664Z,1528919738.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:39.069Z,1528919739.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:39.462Z,1528919739.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:39.863Z,1528919739.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:40.265Z,1528919740.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:40.665Z,1528919740.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:41.066Z,1528919741.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:41.466Z,1528919741.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:41.879Z,1528919741.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:42.264Z,1528919742.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:42.662Z,1528919742.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:43.066Z,1528919743.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:43.466Z,1528919743.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:43.870Z,1528919743.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:44.264Z,1528919744.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:44.663Z,1528919744.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:45.066Z,1528919745.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:45.466Z,1528919745.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:45.864Z,1528919745.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:46.267Z,1528919746.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:46.667Z,1528919746.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:47.066Z,1528919747.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:47.469Z,1528919747.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:47.863Z,1528919747.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:48.267Z,1528919748.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:48.668Z,1528919748.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:49.065Z,1528919749.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:49.465Z,1528919749.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:49.866Z,1528919749.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:50.267Z,1528919750.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:50.665Z,1528919750.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:51.066Z,1528919751.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:51.478Z,1528919751.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:51.816Z,1528919751.816 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:55:51.899Z,1528919751.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:52.264Z,1528919752.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:52.660Z,1528919752.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:53.076Z,1528919753.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:53.469Z,1528919753.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:53.862Z,1528919753.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:54.266Z,1528919754.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:54.676Z,1528919754.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:55.062Z,1528919755.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:55.463Z,1528919755.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:55.864Z,1528919755.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:56.271Z,1528919756.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:56.663Z,1528919756.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:57.066Z,1528919757.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:57.460Z,1528919757.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:57.876Z,1528919757.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:58.276Z,1528919758.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:58.662Z,1528919758.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:59.062Z,1528919759.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:59.476Z,1528919759.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:55:59.863Z,1528919759.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:00.262Z,1528919760.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:00.674Z,1528919760.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:01.075Z,1528919761.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:01.463Z,1528919761.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:01.868Z,1528919761.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:02.263Z,1528919762.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:02.681Z,1528919762.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:03.071Z,1528919763.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:03.463Z,1528919763.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:03.867Z,1528919763.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:04.280Z,1528919764.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:04.672Z,1528919764.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:05.068Z,1528919765.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:05.466Z,1528919765.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:05.883Z,1528919765.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:06.266Z,1528919766.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:06.666Z,1528919766.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:07.063Z,1528919767.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:07.484Z,1528919767.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:07.865Z,1528919767.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:08.266Z,1528919768.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:08.667Z,1528919768.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:09.073Z,1528919769.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:09.457Z,1528919769.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:09.868Z,1528919769.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:10.272Z,1528919770.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:10.658Z,1528919770.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:11.070Z,1528919771.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:11.469Z,1528919771.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:11.863Z,1528919771.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:12.262Z,1528919772.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:12.664Z,1528919772.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:13.057Z,1528919773.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:13.467Z,1528919773.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:13.863Z,1528919773.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:14.261Z,1528919774.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:14.663Z,1528919774.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:15.068Z,1528919775.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:15.459Z,1528919775.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:15.868Z,1528919775.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:16.269Z,1528919776.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:16.661Z,1528919776.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:17.068Z,1528919777.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:17.464Z,1528919777.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:17.857Z,1528919777.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:18.264Z,1528919778.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:18.663Z,1528919778.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:19.057Z,1528919779.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:19.463Z,1528919779.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:19.866Z,1528919779.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:20.262Z,1528919780.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:20.668Z,1528919780.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:21.063Z,1528919781.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:21.461Z,1528919781.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:21.867Z,1528919781.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:22.266Z,1528919782.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:22.668Z,1528919782.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:23.061Z,1528919783.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:23.465Z,1528919783.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:23.861Z,1528919783.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:24.268Z,1528919784.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:24.664Z,1528919784.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:25.064Z,1528919785.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:25.459Z,1528919785.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:25.873Z,1528919785.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:26.265Z,1528919786.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:26.658Z,1528919786.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:27.067Z,1528919787.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:27.468Z,1528919787.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:27.901Z,1528919787.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:28.263Z,1528919788.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:28.662Z,1528919788.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:29.061Z,1528919789.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:29.468Z,1528919789.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:29.866Z,1528919789.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:30.260Z,1528919790.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:30.663Z,1528919790.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:31.065Z,1528919791.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:31.464Z,1528919791.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:31.864Z,1528919791.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:32.273Z,1528919792.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:32.664Z,1528919792.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:33.073Z,1528919793.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:33.464Z,1528919793.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:33.870Z,1528919793.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:34.272Z,1528919794.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:34.672Z,1528919794.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:35.069Z,1528919795.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:35.469Z,1528919795.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:35.875Z,1528919795.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:36.269Z,1528919796.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:36.669Z,1528919796.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:37.071Z,1528919797.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:37.468Z,1528919797.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:37.871Z,1528919797.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:38.256Z,1528919798.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:38.676Z,1528919798.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:39.080Z,1528919799.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:39.464Z,1528919799.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:39.882Z,1528919799.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:40.291Z,1528919800.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:40.660Z,1528919800.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:41.059Z,1528919801.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:41.459Z,1528919801.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:41.859Z,1528919801.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:42.259Z,1528919802.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:42.660Z,1528919802.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:43.059Z,1528919803.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:43.456Z,1528919803.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:43.864Z,1528919803.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:44.260Z,1528919804.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:44.659Z,1528919804.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:45.060Z,1528919805.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:45.464Z,1528919805.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:45.858Z,1528919805.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:46.260Z,1528919806.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:46.663Z,1528919806.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:47.060Z,1528919807.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:47.492Z,1528919807.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:47.859Z,1528919807.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:48.264Z,1528919808.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:48.663Z,1528919808.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:49.059Z,1528919809.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:49.460Z,1528919809.460 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:49.460Z,1528919809.460 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 329
2018-06-13T19:56:49.460Z,1528919809.460 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:56:49.462Z,1528919809.462 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:49.462Z,1528919809.462 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 329
2018-06-13T19:56:49.463Z,1528919809.463 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:56:49.464Z,1528919809.464 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:49.464Z,1528919809.464 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 329
2018-06-13T19:56:49.464Z,1528919809.464 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:56:49.558Z,1528919809.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:56:49.558Z,1528919809.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:56:49.558Z,1528919809.558 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:56:49.937Z,1528919809.937 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:56:49.937Z,1528919809.937 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 329
2018-06-13T19:56:49.938Z,1528919809.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:56:49.938Z,1528919809.938 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 329
2018-06-13T19:56:49.938Z,1528919809.938 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:56:49.938Z,1528919809.938 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 329
2018-06-13T19:56:50.260Z,1528919810.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:56:50.261Z,1528919810.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:56:50.261Z,1528919810.261 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:56:50.262Z,1528919810.262 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:56:50.262Z,1528919810.262 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:56:50.262Z,1528919810.262 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:56:50.263Z,1528919810.263 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:56:50.263Z,1528919810.263 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:56:50.263Z,1528919810.263 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:56:50.663Z,1528919810.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:56:50.664Z,1528919810.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:51.063Z,1528919811.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:56:51.064Z,1528919811.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:51.465Z,1528919811.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:56:51.466Z,1528919811.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:51.869Z,1528919811.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:56:51.870Z,1528919811.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:52.216Z,1528919812.216 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:56:52.292Z,1528919812.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T19:56:52.293Z,1528919812.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:52.672Z,1528919812.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T19:56:52.673Z,1528919812.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:53.063Z,1528919813.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:56:53.064Z,1528919813.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:53.462Z,1528919813.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T19:56:53.463Z,1528919813.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:53.870Z,1528919813.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T19:56:53.871Z,1528919813.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:54.260Z,1528919814.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T19:56:54.261Z,1528919814.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:54.673Z,1528919814.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T19:56:54.674Z,1528919814.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:55.077Z,1528919815.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T19:56:55.078Z,1528919815.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:55.451Z,1528919815.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T19:56:55.452Z,1528919815.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:55.854Z,1528919815.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T19:56:55.855Z,1528919815.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:56.255Z,1528919816.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T19:56:56.256Z,1528919816.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:56.651Z,1528919816.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T19:56:56.652Z,1528919816.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:57.056Z,1528919817.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T19:56:57.057Z,1528919817.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:57.459Z,1528919817.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T19:56:57.460Z,1528919817.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:57.854Z,1528919817.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T19:56:57.855Z,1528919817.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:58.260Z,1528919818.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T19:56:58.277Z,1528919818.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:58.659Z,1528919818.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T19:56:58.660Z,1528919818.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:59.060Z,1528919819.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T19:56:59.061Z,1528919819.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:59.459Z,1528919819.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T19:56:59.460Z,1528919819.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:56:59.859Z,1528919819.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T19:56:59.860Z,1528919819.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:00.260Z,1528919820.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T19:57:00.261Z,1528919820.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:00.659Z,1528919820.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T19:57:00.660Z,1528919820.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:01.059Z,1528919821.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T19:57:01.060Z,1528919821.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:01.460Z,1528919821.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T19:57:01.460Z,1528919821.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:01.864Z,1528919821.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T19:57:01.865Z,1528919821.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:02.258Z,1528919822.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T19:57:02.259Z,1528919822.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:02.660Z,1528919822.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T19:57:02.661Z,1528919822.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:03.086Z,1528919823.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T19:57:03.087Z,1528919823.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:03.489Z,1528919823.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T19:57:03.490Z,1528919823.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:03.863Z,1528919823.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T19:57:03.864Z,1528919823.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:04.262Z,1528919824.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T19:57:04.263Z,1528919824.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:04.661Z,1528919824.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T19:57:04.662Z,1528919824.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:05.061Z,1528919825.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T19:57:05.062Z,1528919825.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:05.463Z,1528919825.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T19:57:05.464Z,1528919825.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:05.875Z,1528919825.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T19:57:05.876Z,1528919825.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:06.261Z,1528919826.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T19:57:06.262Z,1528919826.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:06.663Z,1528919826.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T19:57:06.664Z,1528919826.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:07.071Z,1528919827.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T19:57:07.072Z,1528919827.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:07.457Z,1528919827.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T19:57:07.458Z,1528919827.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:07.862Z,1528919827.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T19:57:07.863Z,1528919827.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:08.282Z,1528919828.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T19:57:08.283Z,1528919828.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:08.371Z,1528919828.371 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T19:57:08.371Z,1528919828.371 [NAL9602] No Fault, FailCount= 5
2018-06-13T19:57:08.618Z,1528919828.618 [NAL9602](INFO): Powering up NAL9602
2018-06-13T19:57:08.665Z,1528919828.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T19:57:08.666Z,1528919828.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:09.061Z,1528919829.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T19:57:09.062Z,1528919829.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:09.469Z,1528919829.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:09.860Z,1528919829.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:10.264Z,1528919830.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:10.676Z,1528919830.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:11.064Z,1528919831.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:11.468Z,1528919831.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:11.868Z,1528919831.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:12.264Z,1528919832.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:12.668Z,1528919832.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:13.072Z,1528919833.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:13.465Z,1528919833.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:13.868Z,1528919833.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:14.273Z,1528919834.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:14.666Z,1528919834.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:15.063Z,1528919835.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:15.467Z,1528919835.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:15.864Z,1528919835.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:16.270Z,1528919836.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:16.672Z,1528919836.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:17.064Z,1528919837.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:17.469Z,1528919837.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:17.865Z,1528919837.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:18.265Z,1528919838.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:18.663Z,1528919838.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:19.080Z,1528919839.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:19.422Z,1528919839.422 [NAL9602](INFO): NAL9602 initialized
2018-06-13T19:57:19.475Z,1528919839.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:19.864Z,1528919839.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:20.284Z,1528919840.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:20.672Z,1528919840.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:21.072Z,1528919841.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:21.468Z,1528919841.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:21.865Z,1528919841.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:22.292Z,1528919842.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:22.683Z,1528919842.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:23.862Z,1528919843.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:23.996Z,1528919843.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:24.424Z,1528919844.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:24.818Z,1528919844.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:25.227Z,1528919845.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:25.595Z,1528919845.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:26.036Z,1528919846.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:26.425Z,1528919846.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:26.800Z,1528919846.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:27.234Z,1528919847.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:27.628Z,1528919847.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:28.794Z,1528919848.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:28.935Z,1528919848.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:29.336Z,1528919849.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:29.734Z,1528919849.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:30.136Z,1528919850.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:30.530Z,1528919850.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:30.946Z,1528919850.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:31.325Z,1528919851.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:31.741Z,1528919851.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:32.938Z,1528919852.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:33.095Z,1528919853.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:33.489Z,1528919853.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:33.891Z,1528919853.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:34.291Z,1528919854.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:34.688Z,1528919854.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:35.068Z,1528919855.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:35.469Z,1528919855.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:35.881Z,1528919855.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:36.294Z,1528919856.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:36.699Z,1528919856.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:37.914Z,1528919857.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:38.076Z,1528919858.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:38.472Z,1528919858.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:38.871Z,1528919858.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:39.276Z,1528919859.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:39.660Z,1528919859.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:40.062Z,1528919860.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:40.464Z,1528919860.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:40.864Z,1528919860.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:41.299Z,1528919861.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:41.669Z,1528919861.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:42.950Z,1528919862.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:43.115Z,1528919863.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:43.508Z,1528919863.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:43.911Z,1528919863.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:44.306Z,1528919864.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:44.706Z,1528919864.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:45.104Z,1528919865.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:45.502Z,1528919865.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:45.906Z,1528919865.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:46.320Z,1528919866.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:46.767Z,1528919866.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:48.524Z,1528919868.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:48.698Z,1528919868.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:49.103Z,1528919869.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:49.485Z,1528919869.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:49.910Z,1528919869.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:50.272Z,1528919870.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:50.675Z,1528919870.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:51.107Z,1528919871.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:51.488Z,1528919871.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:52.676Z,1528919872.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:52.758Z,1528919872.758 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:57:52.835Z,1528919872.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:53.222Z,1528919873.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:53.628Z,1528919873.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:54.033Z,1528919874.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:54.424Z,1528919874.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:54.803Z,1528919874.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:55.243Z,1528919875.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:55.634Z,1528919875.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:56.789Z,1528919876.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:56.906Z,1528919876.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:57.335Z,1528919877.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:57.744Z,1528919877.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:58.133Z,1528919878.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:58.538Z,1528919878.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:58.938Z,1528919878.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:59.345Z,1528919879.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:57:59.735Z,1528919879.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:00.901Z,1528919880.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:01.055Z,1528919881.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:01.452Z,1528919881.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:01.856Z,1528919881.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:02.245Z,1528919882.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:02.642Z,1528919882.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:03.026Z,1528919883.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:03.426Z,1528919883.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:03.830Z,1528919883.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:04.257Z,1528919884.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:04.655Z,1528919884.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:05.823Z,1528919885.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:06.001Z,1528919886.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:06.410Z,1528919886.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:06.804Z,1528919886.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:07.205Z,1528919887.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:07.581Z,1528919887.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:08.016Z,1528919888.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:08.379Z,1528919888.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:08.806Z,1528919888.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:09.964Z,1528919889.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:10.109Z,1528919890.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:10.521Z,1528919890.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:10.928Z,1528919890.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:11.321Z,1528919891.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:11.709Z,1528919891.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:12.115Z,1528919892.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:12.536Z,1528919892.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:12.913Z,1528919892.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:13.332Z,1528919893.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:13.722Z,1528919893.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:14.910Z,1528919894.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:15.072Z,1528919895.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:15.466Z,1528919895.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:15.868Z,1528919895.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:16.269Z,1528919896.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:16.648Z,1528919896.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:17.068Z,1528919897.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:17.448Z,1528919897.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:17.852Z,1528919897.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:18.288Z,1528919898.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:18.655Z,1528919898.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:19.852Z,1528919899.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:20.032Z,1528919900.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:20.431Z,1528919900.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:20.831Z,1528919900.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:21.241Z,1528919901.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:21.722Z,1528919901.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:22.079Z,1528919902.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:22.516Z,1528919902.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:22.897Z,1528919902.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:24.247Z,1528919904.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:24.394Z,1528919904.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:24.800Z,1528919904.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:25.200Z,1528919905.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:25.600Z,1528919905.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:25.980Z,1528919905.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:26.376Z,1528919906.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:26.772Z,1528919906.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:27.221Z,1528919907.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:27.582Z,1528919907.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:28.758Z,1528919908.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:28.916Z,1528919908.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:29.315Z,1528919909.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:29.710Z,1528919909.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:30.112Z,1528919910.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:30.510Z,1528919910.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:30.911Z,1528919910.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:31.318Z,1528919911.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:31.720Z,1528919911.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:32.873Z,1528919912.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:33.017Z,1528919913.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:33.428Z,1528919913.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:33.826Z,1528919913.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:34.227Z,1528919914.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:34.615Z,1528919914.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:35.039Z,1528919915.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:35.444Z,1528919915.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:36.612Z,1528919916.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:36.767Z,1528919916.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:37.173Z,1528919917.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:37.580Z,1528919917.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:37.976Z,1528919917.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:38.364Z,1528919918.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:38.766Z,1528919918.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:39.184Z,1528919919.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:39.576Z,1528919919.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:40.780Z,1528919920.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:40.915Z,1528919920.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:41.359Z,1528919921.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:41.761Z,1528919921.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:42.127Z,1528919922.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:42.518Z,1528919922.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:42.936Z,1528919922.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:43.364Z,1528919923.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:43.732Z,1528919923.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:44.895Z,1528919924.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:45.073Z,1528919925.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:45.480Z,1528919925.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:45.878Z,1528919925.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:46.282Z,1528919926.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:46.676Z,1528919926.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:47.086Z,1528919927.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:47.475Z,1528919927.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:47.877Z,1528919927.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:49.034Z,1528919929.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:49.183Z,1528919929.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:49.577Z,1528919929.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:49.978Z,1528919929.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:50.378Z,1528919930.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:50.773Z,1528919930.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:51.173Z,1528919931.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:51.558Z,1528919931.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:51.961Z,1528919931.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:52.392Z,1528919932.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:52.717Z,1528919932.717 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:58:52.787Z,1528919932.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:53.949Z,1528919933.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:54.101Z,1528919934.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:54.491Z,1528919934.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:54.896Z,1528919934.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:55.294Z,1528919935.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:55.688Z,1528919935.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:56.072Z,1528919936.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:56.468Z,1528919936.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:56.896Z,1528919936.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:57.305Z,1528919937.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:57.695Z,1528919937.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:58.872Z,1528919938.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:58.996Z,1528919938.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:59.414Z,1528919939.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:58:59.817Z,1528919939.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:00.215Z,1528919940.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:00.615Z,1528919940.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:01.016Z,1528919941.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:01.426Z,1528919941.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:01.814Z,1528919941.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:02.983Z,1528919942.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:03.168Z,1528919943.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:03.563Z,1528919943.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:03.967Z,1528919943.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:04.368Z,1528919944.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:04.757Z,1528919944.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:05.158Z,1528919945.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:05.546Z,1528919945.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:05.972Z,1528919945.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:06.379Z,1528919946.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:06.780Z,1528919946.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:07.936Z,1528919947.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:08.079Z,1528919948.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:08.489Z,1528919948.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:08.886Z,1528919948.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:09.286Z,1528919949.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:09.673Z,1528919949.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:10.096Z,1528919950.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:10.474Z,1528919950.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:10.884Z,1528919950.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:12.051Z,1528919952.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:12.214Z,1528919952.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:12.632Z,1528919952.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:13.034Z,1528919953.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:13.430Z,1528919953.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:13.828Z,1528919953.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:14.246Z,1528919954.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:14.625Z,1528919954.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:15.034Z,1528919955.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:15.438Z,1528919955.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:15.833Z,1528919955.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:16.996Z,1528919956.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:17.143Z,1528919957.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:17.536Z,1528919957.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:17.939Z,1528919957.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:18.338Z,1528919958.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:18.736Z,1528919958.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:19.139Z,1528919959.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:19.516Z,1528919959.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:19.917Z,1528919959.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:20.346Z,1528919960.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:20.739Z,1528919960.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:21.911Z,1528919961.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:22.104Z,1528919962.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:22.489Z,1528919962.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:22.890Z,1528919962.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:23.297Z,1528919963.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:23.684Z,1528919963.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:24.100Z,1528919964.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:24.477Z,1528919964.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:24.889Z,1528919964.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:26.055Z,1528919966.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:26.245Z,1528919966.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:26.643Z,1528919966.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:27.034Z,1528919967.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:27.442Z,1528919967.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:27.831Z,1528919967.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:28.232Z,1528919968.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:28.634Z,1528919968.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:29.034Z,1528919969.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:29.446Z,1528919969.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:29.844Z,1528919969.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:31.003Z,1528919971.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:31.143Z,1528919971.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:31.548Z,1528919971.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:31.956Z,1528919971.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:32.356Z,1528919972.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:32.738Z,1528919972.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:33.183Z,1528919973.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:33.538Z,1528919973.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:33.944Z,1528919973.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:34.357Z,1528919974.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:35.511Z,1528919975.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:35.689Z,1528919975.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:36.088Z,1528919976.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:36.486Z,1528919976.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:36.900Z,1528919976.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:37.272Z,1528919977.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:37.672Z,1528919977.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:38.068Z,1528919978.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:38.499Z,1528919978.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:38.879Z,1528919978.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:40.065Z,1528919980.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:40.216Z,1528919980.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:40.624Z,1528919980.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:41.016Z,1528919981.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:41.415Z,1528919981.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:41.801Z,1528919981.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:42.207Z,1528919982.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:42.608Z,1528919982.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:43.007Z,1528919983.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:43.421Z,1528919983.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:43.832Z,1528919983.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:45.017Z,1528919985.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:45.160Z,1528919985.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:45.562Z,1528919985.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:45.961Z,1528919985.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:46.363Z,1528919986.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:46.757Z,1528919986.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:47.176Z,1528919987.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:47.564Z,1528919987.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:47.963Z,1528919987.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:49.127Z,1528919989.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:49.283Z,1528919989.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:49.672Z,1528919989.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:50.070Z,1528919990.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:50.470Z,1528919990.470 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:50.470Z,1528919990.470 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 330
2018-06-13T19:59:50.470Z,1528919990.470 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T19:59:50.472Z,1528919990.472 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:50.472Z,1528919990.472 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 330
2018-06-13T19:59:50.472Z,1528919990.472 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T19:59:50.474Z,1528919990.474 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:50.474Z,1528919990.474 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 330
2018-06-13T19:59:50.474Z,1528919990.474 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T19:59:50.558Z,1528919990.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T19:59:50.559Z,1528919990.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T19:59:50.559Z,1528919990.559 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T19:59:50.926Z,1528919990.926 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T19:59:50.926Z,1528919990.926 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 330
2018-06-13T19:59:50.926Z,1528919990.926 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T19:59:50.926Z,1528919990.926 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 330
2018-06-13T19:59:50.927Z,1528919990.927 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T19:59:50.927Z,1528919990.927 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 330
2018-06-13T19:59:51.247Z,1528919991.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T19:59:51.248Z,1528919991.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:59:51.248Z,1528919991.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:59:51.249Z,1528919991.249 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T19:59:51.249Z,1528919991.249 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:59:51.249Z,1528919991.249 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:59:51.250Z,1528919991.250 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T19:59:51.250Z,1528919991.250 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T19:59:51.250Z,1528919991.250 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T19:59:51.660Z,1528919991.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T19:59:51.677Z,1528919991.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:52.060Z,1528919992.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T19:59:52.061Z,1528919992.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:52.483Z,1528919992.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T19:59:52.484Z,1528919992.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:52.808Z,1528919992.808 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T19:59:52.882Z,1528919992.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T19:59:52.883Z,1528919992.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:54.038Z,1528919994.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T19:59:54.039Z,1528919994.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:54.178Z,1528919994.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T19:59:54.179Z,1528919994.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:54.589Z,1528919994.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T19:59:54.590Z,1528919994.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:54.995Z,1528919994.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T19:59:54.996Z,1528919994.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:55.389Z,1528919995.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T19:59:55.390Z,1528919995.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:55.764Z,1528919995.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T19:59:55.765Z,1528919995.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:56.210Z,1528919996.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T19:59:56.211Z,1528919996.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:56.569Z,1528919996.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T19:59:56.570Z,1528919996.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:56.972Z,1528919996.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T19:59:56.973Z,1528919996.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:57.402Z,1528919997.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T19:59:57.403Z,1528919997.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:57.774Z,1528919997.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T19:59:57.775Z,1528919997.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:58.972Z,1528919998.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T19:59:58.973Z,1528919998.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:59.122Z,1528919999.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T19:59:59.123Z,1528919999.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:59.527Z,1528919999.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T19:59:59.527Z,1528919999.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T19:59:59.931Z,1528919999.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T19:59:59.932Z,1528919999.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:00.324Z,1528920000.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T20:00:00.324Z,1528920000.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:00.729Z,1528920000.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T20:00:00.730Z,1528920000.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:01.118Z,1528920001.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T20:00:01.119Z,1528920001.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:01.546Z,1528920001.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T20:00:01.547Z,1528920001.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:01.927Z,1528920001.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T20:00:01.928Z,1528920001.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:03.076Z,1528920003.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T20:00:03.077Z,1528920003.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:03.219Z,1528920003.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-06-13T20:00:03.219Z,1528920003.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:03.616Z,1528920003.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-06-13T20:00:03.617Z,1528920003.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:04.016Z,1528920004.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-06-13T20:00:04.017Z,1528920004.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:04.421Z,1528920004.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T20:00:04.422Z,1528920004.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:04.808Z,1528920004.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-06-13T20:00:04.809Z,1528920004.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:05.216Z,1528920005.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T20:00:05.217Z,1528920005.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:05.608Z,1528920005.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-06-13T20:00:05.613Z,1528920005.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:06.018Z,1528920006.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T20:00:06.019Z,1528920006.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:06.436Z,1528920006.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T20:00:06.437Z,1528920006.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:06.818Z,1528920006.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-06-13T20:00:06.819Z,1528920006.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:08.030Z,1528920008.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T20:00:08.031Z,1528920008.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:08.205Z,1528920008.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T20:00:08.206Z,1528920008.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:08.591Z,1528920008.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T20:00:08.591Z,1528920008.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:08.992Z,1528920008.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T20:00:08.993Z,1528920008.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:09.390Z,1528920009.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T20:00:09.391Z,1528920009.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:09.787Z,1528920009.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T20:00:09.788Z,1528920009.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:10.199Z,1528920010.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T20:00:10.200Z,1528920010.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:10.580Z,1528920010.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:11.001Z,1528920011.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:12.175Z,1528920012.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:12.322Z,1528920012.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:12.719Z,1528920012.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:13.123Z,1528920013.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:13.524Z,1528920013.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:13.913Z,1528920013.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:14.318Z,1528920014.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:14.714Z,1528920014.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:15.116Z,1528920015.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:15.527Z,1528920015.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:15.932Z,1528920015.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:17.113Z,1528920017.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:17.260Z,1528920017.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:17.658Z,1528920017.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:18.062Z,1528920018.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:18.458Z,1528920018.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:18.859Z,1528920018.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:19.255Z,1528920019.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:19.658Z,1528920019.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:20.059Z,1528920020.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:20.472Z,1528920020.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:20.868Z,1528920020.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:22.020Z,1528920022.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:22.167Z,1528920022.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:22.576Z,1528920022.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:22.976Z,1528920022.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:23.370Z,1528920023.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:23.756Z,1528920023.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:24.159Z,1528920024.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:24.575Z,1528920024.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:24.956Z,1528920024.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:25.369Z,1528920025.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:26.520Z,1528920026.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:26.672Z,1528920026.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:27.101Z,1528920027.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:27.475Z,1528920027.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:27.870Z,1528920027.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:28.266Z,1528920028.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:28.666Z,1528920028.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:29.060Z,1528920029.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:29.481Z,1528920029.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:29.874Z,1528920029.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:31.103Z,1528920031.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:31.260Z,1528920031.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:31.659Z,1528920031.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:32.068Z,1528920032.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:32.462Z,1528920032.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:32.860Z,1528920032.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:33.237Z,1528920033.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:33.638Z,1528920033.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:34.042Z,1528920034.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:34.476Z,1528920034.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:34.871Z,1528920034.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:36.067Z,1528920036.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:36.232Z,1528920036.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:36.636Z,1528920036.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:37.026Z,1528920037.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:37.426Z,1528920037.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:37.822Z,1528920037.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:38.235Z,1528920038.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:38.601Z,1528920038.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:39.030Z,1528920039.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:40.186Z,1528920040.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:40.318Z,1528920040.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:40.735Z,1528920040.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:41.137Z,1528920041.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:41.539Z,1528920041.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:41.933Z,1528920041.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:42.336Z,1528920042.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:42.732Z,1528920042.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:43.142Z,1528920043.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:43.552Z,1528920043.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:43.943Z,1528920043.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:45.113Z,1528920045.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:45.291Z,1528920045.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:45.683Z,1528920045.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:46.091Z,1528920046.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:46.492Z,1528920046.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:46.872Z,1528920046.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:47.296Z,1528920047.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:47.668Z,1528920047.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:48.072Z,1528920048.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:48.496Z,1528920048.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:48.894Z,1528920048.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:50.063Z,1528920050.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:50.212Z,1528920050.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:50.614Z,1528920050.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:51.020Z,1528920051.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:51.414Z,1528920051.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:51.804Z,1528920051.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:52.217Z,1528920052.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:52.552Z,1528920052.552 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:00:52.604Z,1528920052.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:53.017Z,1528920053.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:54.205Z,1528920054.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:54.355Z,1528920054.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:54.748Z,1528920054.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:55.150Z,1528920055.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:55.554Z,1528920055.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:55.948Z,1528920055.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:56.348Z,1528920056.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:56.746Z,1528920056.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:57.145Z,1528920057.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:57.560Z,1528920057.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:57.956Z,1528920057.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:59.189Z,1528920059.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:59.351Z,1528920059.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:00:59.743Z,1528920059.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:00.152Z,1528920060.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:00.544Z,1528920060.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:00.946Z,1528920060.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:01.324Z,1528920061.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:01.721Z,1528920061.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:02.125Z,1528920062.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:02.551Z,1528920062.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:02.951Z,1528920062.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:04.153Z,1528920064.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:04.307Z,1528920064.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:04.705Z,1528920064.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:05.114Z,1528920065.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:05.505Z,1528920065.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:05.896Z,1528920065.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:06.302Z,1528920066.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:06.701Z,1528920066.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:07.100Z,1528920067.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:07.523Z,1528920067.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:07.900Z,1528920067.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:09.135Z,1528920069.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:09.274Z,1528920069.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:09.694Z,1528920069.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:10.095Z,1528920070.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:10.490Z,1528920070.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:10.884Z,1528920070.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:11.314Z,1528920071.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:11.681Z,1528920071.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:12.103Z,1528920072.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:13.259Z,1528920073.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:13.399Z,1528920073.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:13.807Z,1528920073.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:14.248Z,1528920074.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:14.612Z,1528920074.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:15.006Z,1528920075.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:15.400Z,1528920075.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:15.799Z,1528920075.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:16.208Z,1528920076.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:16.619Z,1528920076.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:17.007Z,1528920077.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:18.193Z,1528920078.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:18.358Z,1528920078.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:18.751Z,1528920078.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:19.165Z,1528920079.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:19.553Z,1528920079.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:19.956Z,1528920079.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:20.329Z,1528920080.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:20.729Z,1528920080.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:21.160Z,1528920081.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:21.627Z,1528920081.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:21.970Z,1528920081.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:24.255Z,1528920084.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:24.402Z,1528920084.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:24.831Z,1528920084.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:25.234Z,1528920085.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:25.629Z,1528920085.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:26.029Z,1528920086.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:26.432Z,1528920086.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:26.808Z,1528920086.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:27.230Z,1528920087.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:27.642Z,1528920087.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:28.043Z,1528920088.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:29.281Z,1528920089.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:29.439Z,1528920089.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:29.844Z,1528920089.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:30.252Z,1528920090.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:30.647Z,1528920090.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:31.020Z,1528920091.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:31.444Z,1528920091.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:31.820Z,1528920091.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:32.224Z,1528920092.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:32.651Z,1528920092.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:33.050Z,1528920093.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:34.257Z,1528920094.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:34.416Z,1528920094.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:34.819Z,1528920094.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:35.218Z,1528920095.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:35.619Z,1528920095.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:36.016Z,1528920096.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:36.409Z,1528920096.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:36.812Z,1528920096.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:37.210Z,1528920097.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:37.630Z,1528920097.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:38.021Z,1528920098.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:39.235Z,1528920099.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:39.411Z,1528920099.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:39.804Z,1528920099.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:40.208Z,1528920100.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:40.615Z,1528920100.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:41.008Z,1528920101.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:41.389Z,1528920101.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:41.789Z,1528920101.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:42.192Z,1528920102.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:42.622Z,1528920102.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:43.007Z,1528920103.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:44.218Z,1528920104.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:44.375Z,1528920104.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:44.773Z,1528920104.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:45.182Z,1528920105.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:45.570Z,1528920105.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:45.960Z,1528920105.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:46.352Z,1528920106.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:46.749Z,1528920106.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:47.174Z,1528920107.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:47.586Z,1528920107.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:47.980Z,1528920107.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:49.185Z,1528920109.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:49.343Z,1528920109.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:49.754Z,1528920109.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:50.155Z,1528920110.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:50.564Z,1528920110.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:50.944Z,1528920110.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:51.353Z,1528920111.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:51.743Z,1528920111.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:52.149Z,1528920112.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:52.558Z,1528920112.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:52.956Z,1528920112.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:54.186Z,1528920114.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:54.344Z,1528920114.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:54.676Z,1528920114.676 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:01:54.748Z,1528920114.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:55.148Z,1528920115.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:55.544Z,1528920115.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:55.933Z,1528920115.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:56.352Z,1528920116.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:56.717Z,1528920116.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:57.136Z,1528920117.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:58.304Z,1528920118.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:58.456Z,1528920118.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:58.850Z,1528920118.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:59.269Z,1528920119.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:01:59.650Z,1528920119.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:00.045Z,1528920120.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:00.442Z,1528920120.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:00.840Z,1528920120.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:01.239Z,1528920121.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:01.734Z,1528920121.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:02.046Z,1528920122.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:04.059Z,1528920124.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:04.215Z,1528920124.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:04.614Z,1528920124.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:05.013Z,1528920125.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:05.409Z,1528920125.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:05.811Z,1528920125.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:06.214Z,1528920126.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:06.623Z,1528920126.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:07.020Z,1528920127.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:08.179Z,1528920128.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:08.320Z,1528920128.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:08.725Z,1528920128.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:09.128Z,1528920129.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:09.523Z,1528920129.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:09.914Z,1528920129.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:10.324Z,1528920130.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:10.735Z,1528920130.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:11.114Z,1528920131.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:11.526Z,1528920131.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:12.677Z,1528920132.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:12.836Z,1528920132.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:13.238Z,1528920133.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:13.632Z,1528920133.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:14.026Z,1528920134.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:14.424Z,1528920134.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:14.815Z,1528920134.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:15.213Z,1528920135.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:15.638Z,1528920135.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:16.058Z,1528920136.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:17.259Z,1528920137.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:17.423Z,1528920137.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:17.824Z,1528920137.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:18.219Z,1528920138.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:18.619Z,1528920138.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:19.008Z,1528920139.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:19.396Z,1528920139.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:19.809Z,1528920139.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:20.199Z,1528920140.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:20.630Z,1528920140.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:21.024Z,1528920141.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:22.325Z,1528920142.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:22.480Z,1528920142.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:22.872Z,1528920142.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:23.278Z,1528920143.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:23.674Z,1528920143.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:24.080Z,1528920144.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:24.476Z,1528920144.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:24.857Z,1528920144.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:25.259Z,1528920145.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:25.689Z,1528920145.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:26.082Z,1528920146.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:27.287Z,1528920147.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:27.447Z,1528920147.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:27.844Z,1528920147.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:28.242Z,1528920148.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:28.638Z,1528920148.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:29.034Z,1528920149.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:29.432Z,1528920149.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:29.837Z,1528920149.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:30.242Z,1528920150.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:30.650Z,1528920150.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:31.047Z,1528920151.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:32.267Z,1528920152.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:32.451Z,1528920152.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:32.846Z,1528920152.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:33.253Z,1528920153.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:33.647Z,1528920153.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:34.047Z,1528920154.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:34.447Z,1528920154.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:34.837Z,1528920154.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:35.245Z,1528920155.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:35.658Z,1528920155.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:36.056Z,1528920156.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:38.468Z,1528920158.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:38.591Z,1528920158.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:39.008Z,1528920159.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:39.415Z,1528920159.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:39.811Z,1528920159.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:40.209Z,1528920160.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:40.617Z,1528920160.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:40.989Z,1528920160.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:41.426Z,1528920161.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:41.816Z,1528920161.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:42.984Z,1528920162.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:43.128Z,1528920163.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:43.529Z,1528920163.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:43.935Z,1528920163.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:44.328Z,1528920164.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:44.727Z,1528920164.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:45.124Z,1528920165.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:45.537Z,1528920165.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:45.926Z,1528920165.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:46.332Z,1528920166.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:47.542Z,1528920167.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:47.690Z,1528920167.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:48.120Z,1528920168.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:48.497Z,1528920168.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:48.894Z,1528920168.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:49.296Z,1528920169.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:49.699Z,1528920169.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:50.078Z,1528920170.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:50.498Z,1528920170.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:50.900Z,1528920170.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:52.051Z,1528920172.051 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:52.051Z,1528920172.051 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 331
2018-06-13T20:02:52.052Z,1528920172.052 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:02:52.069Z,1528920172.069 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:52.070Z,1528920172.070 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 331
2018-06-13T20:02:52.070Z,1528920172.070 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:02:52.071Z,1528920172.071 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:52.071Z,1528920172.071 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 331
2018-06-13T20:02:52.071Z,1528920172.071 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:02:52.153Z,1528920172.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:02:52.153Z,1528920172.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:02:52.154Z,1528920172.154 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:02:52.333Z,1528920172.333 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:02:52.333Z,1528920172.333 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 331
2018-06-13T20:02:52.334Z,1528920172.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:02:52.334Z,1528920172.334 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 331
2018-06-13T20:02:52.334Z,1528920172.334 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:02:52.334Z,1528920172.334 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 331
2018-06-13T20:02:52.621Z,1528920172.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:02:52.621Z,1528920172.621 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:02:52.622Z,1528920172.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:02:52.622Z,1528920172.622 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:02:52.622Z,1528920172.622 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:02:52.623Z,1528920172.623 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:02:52.623Z,1528920172.623 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:02:52.623Z,1528920172.623 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:02:52.624Z,1528920172.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:02:53.030Z,1528920173.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T20:02:53.031Z,1528920173.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:53.428Z,1528920173.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T20:02:53.429Z,1528920173.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:53.827Z,1528920173.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T20:02:53.828Z,1528920173.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:54.214Z,1528920174.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T20:02:54.214Z,1528920174.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:54.561Z,1528920174.561 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:02:54.635Z,1528920174.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T20:02:54.636Z,1528920174.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:55.021Z,1528920175.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T20:02:55.022Z,1528920175.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:56.181Z,1528920176.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T20:02:56.182Z,1528920176.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:56.332Z,1528920176.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-06-13T20:02:56.333Z,1528920176.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:56.729Z,1528920176.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2018-06-13T20:02:56.730Z,1528920176.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:57.133Z,1528920177.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-06-13T20:02:57.134Z,1528920177.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:57.532Z,1528920177.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T20:02:57.534Z,1528920177.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:57.930Z,1528920177.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T20:02:57.931Z,1528920177.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:58.326Z,1528920178.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T20:02:58.327Z,1528920178.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:58.744Z,1528920178.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T20:02:58.746Z,1528920178.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:02:59.141Z,1528920179.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T20:02:59.142Z,1528920179.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:00.297Z,1528920180.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T20:03:00.298Z,1528920180.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:00.451Z,1528920180.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T20:03:00.452Z,1528920180.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:00.845Z,1528920180.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T20:03:00.846Z,1528920180.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:01.251Z,1528920181.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T20:03:01.252Z,1528920181.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:01.654Z,1528920181.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T20:03:01.655Z,1528920181.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:02.047Z,1528920182.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T20:03:02.048Z,1528920182.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:02.458Z,1528920182.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T20:03:02.459Z,1528920182.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:02.837Z,1528920182.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T20:03:02.838Z,1528920182.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:03.224Z,1528920183.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T20:03:03.226Z,1528920183.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:03.655Z,1528920183.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T20:03:03.656Z,1528920183.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:04.869Z,1528920184.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T20:03:04.870Z,1528920184.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:04.999Z,1528920184.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T20:03:05.000Z,1528920185.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:05.414Z,1528920185.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T20:03:05.415Z,1528920185.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:05.820Z,1528920185.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T20:03:05.821Z,1528920185.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:06.222Z,1528920186.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T20:03:06.223Z,1528920186.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:06.589Z,1528920186.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T20:03:06.590Z,1528920186.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:06.992Z,1528920186.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T20:03:06.993Z,1528920186.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:07.388Z,1528920187.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T20:03:07.389Z,1528920187.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:07.823Z,1528920187.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T20:03:07.824Z,1528920187.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:08.220Z,1528920188.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T20:03:08.225Z,1528920188.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:09.382Z,1528920189.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T20:03:09.383Z,1528920189.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:09.532Z,1528920189.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T20:03:09.533Z,1528920189.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:09.934Z,1528920189.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T20:03:09.935Z,1528920189.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:10.331Z,1528920190.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T20:03:10.331Z,1528920190.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:10.726Z,1528920190.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T20:03:10.727Z,1528920190.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:11.127Z,1528920191.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T20:03:11.128Z,1528920191.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:11.524Z,1528920191.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T20:03:11.529Z,1528920191.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:11.992Z,1528920191.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T20:03:12.007Z,1528920192.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:12.332Z,1528920192.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:12.852Z,1528920192.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:13.132Z,1528920193.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:14.406Z,1528920194.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:14.549Z,1528920194.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:14.965Z,1528920194.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:15.369Z,1528920195.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:15.767Z,1528920195.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:16.162Z,1528920196.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:16.567Z,1528920196.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:16.972Z,1528920196.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:17.358Z,1528920197.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:17.776Z,1528920197.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:18.172Z,1528920198.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:19.373Z,1528920199.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:19.510Z,1528920199.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:19.915Z,1528920199.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:20.318Z,1528920200.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:20.720Z,1528920200.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:21.113Z,1528920201.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:21.513Z,1528920201.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:21.897Z,1528920201.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:22.304Z,1528920202.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:22.740Z,1528920202.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:23.107Z,1528920203.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:24.329Z,1528920204.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:24.487Z,1528920204.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:24.881Z,1528920204.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:25.284Z,1528920205.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:25.686Z,1528920205.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:26.080Z,1528920206.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:26.494Z,1528920206.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:26.881Z,1528920206.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:27.292Z,1528920207.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:28.440Z,1528920208.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:28.591Z,1528920208.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:29.000Z,1528920209.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:29.386Z,1528920209.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:29.789Z,1528920209.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:30.186Z,1528920210.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:30.582Z,1528920210.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:30.987Z,1528920210.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:31.391Z,1528920211.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:31.795Z,1528920211.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:32.186Z,1528920212.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:33.377Z,1528920213.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:33.536Z,1528920213.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:33.931Z,1528920213.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:34.338Z,1528920214.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:34.734Z,1528920214.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:35.100Z,1528920215.100 [BPC1](ERROR): Failed to receive data from both battery packs
2018-06-13T20:03:35.100Z,1528920215.100 [BPC1] Communications Fault, FailCount= 9
2018-06-13T20:03:35.100Z,1528920215.100 [BPC1](ERROR): Communications Fault
2018-06-13T20:03:35.131Z,1528920215.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:35.218Z,1528920215.218 [CBIT](ERROR): Communications Fault in component: BPC1
2018-06-13T20:03:35.529Z,1528920215.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:35.909Z,1528920215.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:36.340Z,1528920216.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:36.429Z,1528920216.429 [CBIT](INFO): Clearing failed state for component BPC1
2018-06-13T20:03:36.429Z,1528920216.429 [BPC1] No Fault, FailCount= 9
2018-06-13T20:03:36.796Z,1528920216.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:37.142Z,1528920217.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:38.304Z,1528920218.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:38.476Z,1528920218.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:38.871Z,1528920218.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:39.276Z,1528920219.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:39.676Z,1528920219.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:40.056Z,1528920220.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:40.465Z,1528920220.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:40.900Z,1528920220.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:41.269Z,1528920221.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:42.431Z,1528920222.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:42.611Z,1528920222.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:43.012Z,1528920223.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:43.411Z,1528920223.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:43.807Z,1528920223.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:44.211Z,1528920224.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:44.603Z,1528920224.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:45.003Z,1528920225.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:45.402Z,1528920225.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:45.824Z,1528920225.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:46.231Z,1528920226.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:49.011Z,1528920229.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:49.167Z,1528920229.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:49.564Z,1528920229.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:49.970Z,1528920229.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:50.365Z,1528920230.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:50.756Z,1528920230.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:51.163Z,1528920231.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:51.572Z,1528920231.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:51.969Z,1528920231.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:53.159Z,1528920233.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:53.319Z,1528920233.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:53.711Z,1528920233.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:54.115Z,1528920234.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:54.452Z,1528920234.452 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:03:54.520Z,1528920234.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:54.892Z,1528920234.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:55.293Z,1528920235.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:55.723Z,1528920235.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:56.116Z,1528920236.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:57.312Z,1528920237.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:57.454Z,1528920237.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:57.876Z,1528920237.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:58.276Z,1528920238.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:58.680Z,1528920238.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:59.071Z,1528920239.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:59.473Z,1528920239.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:03:59.888Z,1528920239.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:00.279Z,1528920240.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:01.436Z,1528920241.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:01.576Z,1528920241.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:01.973Z,1528920241.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:02.376Z,1528920242.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:02.784Z,1528920242.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:03.172Z,1528920243.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:03.573Z,1528920243.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:03.973Z,1528920243.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:04.357Z,1528920244.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:04.782Z,1528920244.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:05.185Z,1528920245.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:06.344Z,1528920246.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:06.478Z,1528920246.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:06.892Z,1528920246.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:07.292Z,1528920247.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:07.686Z,1528920247.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:08.081Z,1528920248.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:08.478Z,1528920248.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:08.898Z,1528920248.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:09.284Z,1528920249.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:09.689Z,1528920249.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:10.838Z,1528920250.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:11.002Z,1528920251.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:11.399Z,1528920251.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:11.791Z,1528920251.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:12.190Z,1528920252.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:12.588Z,1528920252.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:12.972Z,1528920252.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:13.400Z,1528920253.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:13.810Z,1528920253.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:14.226Z,1528920254.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:15.368Z,1528920255.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:15.514Z,1528920255.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:15.932Z,1528920255.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:16.336Z,1528920256.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:16.731Z,1528920256.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:17.133Z,1528920257.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:17.541Z,1528920257.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:17.908Z,1528920257.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:18.324Z,1528920258.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:18.740Z,1528920258.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:19.935Z,1528920259.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:20.096Z,1528920260.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:20.504Z,1528920260.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:20.900Z,1528920260.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:21.294Z,1528920261.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:21.681Z,1528920261.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:22.070Z,1528920262.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:22.474Z,1528920262.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:22.900Z,1528920262.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:23.299Z,1528920263.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:24.463Z,1528920264.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:24.624Z,1528920264.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:25.015Z,1528920265.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:25.417Z,1528920265.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:25.815Z,1528920265.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:26.200Z,1528920266.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:26.696Z,1528920266.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:27.066Z,1528920267.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:27.496Z,1528920267.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:27.831Z,1528920267.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:28.270Z,1528920268.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:29.394Z,1528920269.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:29.523Z,1528920269.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:29.950Z,1528920269.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:30.351Z,1528920270.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:30.754Z,1528920270.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:31.153Z,1528920271.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:31.568Z,1528920271.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:31.949Z,1528920271.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:32.357Z,1528920272.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:33.505Z,1528920273.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:33.667Z,1528920273.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:34.061Z,1528920274.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:34.462Z,1528920274.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:34.869Z,1528920274.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:35.253Z,1528920275.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:35.663Z,1528920275.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:36.040Z,1528920276.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:36.464Z,1528920276.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:36.880Z,1528920276.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:37.284Z,1528920277.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:38.435Z,1528920278.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:38.579Z,1528920278.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:38.977Z,1528920278.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:39.382Z,1528920279.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:39.776Z,1528920279.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:40.176Z,1528920280.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:40.587Z,1528920280.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:40.973Z,1528920280.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:41.373Z,1528920281.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:41.778Z,1528920281.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:42.982Z,1528920282.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:43.098Z,1528920283.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:43.537Z,1528920283.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:43.948Z,1528920283.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:44.333Z,1528920284.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:44.730Z,1528920284.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:45.108Z,1528920285.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:45.530Z,1528920285.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:45.949Z,1528920285.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:46.338Z,1528920286.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:47.516Z,1528920287.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:47.701Z,1528920287.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:48.088Z,1528920288.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:48.492Z,1528920288.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:48.886Z,1528920288.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:49.269Z,1528920289.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:49.692Z,1528920289.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:50.094Z,1528920290.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:50.476Z,1528920290.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:50.899Z,1528920290.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:51.307Z,1528920291.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:52.454Z,1528920292.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:52.611Z,1528920292.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:53.004Z,1528920293.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:53.405Z,1528920293.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:53.805Z,1528920293.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:54.205Z,1528920294.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:54.620Z,1528920294.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:54.941Z,1528920294.941 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:04:54.981Z,1528920294.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:55.413Z,1528920295.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:56.565Z,1528920296.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:56.716Z,1528920296.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:57.124Z,1528920297.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:57.518Z,1528920297.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:57.920Z,1528920297.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:58.312Z,1528920298.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:58.711Z,1528920298.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:59.107Z,1528920299.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:59.527Z,1528920299.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:04:59.940Z,1528920299.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:00.319Z,1528920300.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:01.518Z,1528920301.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:01.702Z,1528920301.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:02.082Z,1528920302.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:02.460Z,1528920302.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:02.855Z,1528920302.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:03.256Z,1528920303.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:03.650Z,1528920303.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:04.052Z,1528920304.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:04.450Z,1528920304.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:04.880Z,1528920304.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:05.258Z,1528920305.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:06.634Z,1528920306.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:06.762Z,1528920306.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:07.196Z,1528920307.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:07.600Z,1528920307.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:07.994Z,1528920307.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:08.368Z,1528920308.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:08.768Z,1528920308.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:09.165Z,1528920309.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:09.569Z,1528920309.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:10.000Z,1528920310.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:10.393Z,1528920310.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:11.591Z,1528920311.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:11.752Z,1528920311.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:12.157Z,1528920312.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:12.549Z,1528920312.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:12.950Z,1528920312.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:13.345Z,1528920313.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:13.748Z,1528920313.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:14.143Z,1528920314.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:14.544Z,1528920314.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:14.957Z,1528920314.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:15.350Z,1528920315.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:16.567Z,1528920316.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:16.741Z,1528920316.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:17.148Z,1528920317.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:17.552Z,1528920317.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:17.952Z,1528920317.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:18.340Z,1528920318.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:18.749Z,1528920318.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:19.128Z,1528920319.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:19.525Z,1528920319.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:19.956Z,1528920319.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:20.356Z,1528920320.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:21.555Z,1528920321.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:21.708Z,1528920321.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:22.103Z,1528920322.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:22.512Z,1528920322.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:22.903Z,1528920322.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:23.305Z,1528920323.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:23.684Z,1528920323.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:24.101Z,1528920324.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:24.496Z,1528920324.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:24.916Z,1528920324.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:25.308Z,1528920325.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:26.528Z,1528920326.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:26.671Z,1528920326.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:27.071Z,1528920327.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:27.476Z,1528920327.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:27.871Z,1528920327.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:28.266Z,1528920328.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:28.683Z,1528920328.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:29.064Z,1528920329.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:29.470Z,1528920329.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:30.631Z,1528920330.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:30.761Z,1528920330.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:31.178Z,1528920331.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:31.578Z,1528920331.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:31.974Z,1528920331.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:32.359Z,1528920332.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:32.760Z,1528920332.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:33.188Z,1528920333.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:33.563Z,1528920333.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.375359 seconds old.
2018-06-13T20:05:33.564Z,1528920333.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:33.565Z,1528920333.565 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.375619 seconds old.
2018-06-13T20:05:33.566Z,1528920333.566 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.376177 seconds old.
2018-06-13T20:05:33.994Z,1528920333.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.806514 seconds old.
2018-06-13T20:05:33.995Z,1528920333.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:33.996Z,1528920333.996 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.806661 seconds old.
2018-06-13T20:05:33.997Z,1528920333.997 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.807197 seconds old.
2018-06-13T20:05:34.368Z,1528920334.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.180520 seconds old.
2018-06-13T20:05:34.369Z,1528920334.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:34.370Z,1528920334.370 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.180883 seconds old.
2018-06-13T20:05:34.371Z,1528920334.371 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.181222 seconds old.
2018-06-13T20:05:35.548Z,1528920335.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.360564 seconds old.
2018-06-13T20:05:35.549Z,1528920335.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:35.550Z,1528920335.550 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.360813 seconds old.
2018-06-13T20:05:35.551Z,1528920335.551 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.361149 seconds old.
2018-06-13T20:05:35.675Z,1528920335.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.487321 seconds old.
2018-06-13T20:05:35.676Z,1528920335.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:35.677Z,1528920335.677 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.487463 seconds old.
2018-06-13T20:05:35.678Z,1528920335.678 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.488017 seconds old.
2018-06-13T20:05:36.102Z,1528920336.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.914854 seconds old.
2018-06-13T20:05:36.103Z,1528920336.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:36.104Z,1528920336.104 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.914995 seconds old.
2018-06-13T20:05:36.105Z,1528920336.105 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.915532 seconds old.
2018-06-13T20:05:36.515Z,1528920336.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.327313 seconds old.
2018-06-13T20:05:36.516Z,1528920336.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:36.517Z,1528920336.517 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.327444 seconds old.
2018-06-13T20:05:36.518Z,1528920336.518 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.328018 seconds old.
2018-06-13T20:05:36.899Z,1528920336.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.711629 seconds old.
2018-06-13T20:05:36.900Z,1528920336.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:36.901Z,1528920336.901 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.711958 seconds old.
2018-06-13T20:05:36.902Z,1528920336.902 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.712331 seconds old.
2018-06-13T20:05:37.283Z,1528920337.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.095542 seconds old.
2018-06-13T20:05:37.284Z,1528920337.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:37.301Z,1528920337.301 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.111791 seconds old.
2018-06-13T20:05:37.302Z,1528920337.302 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.112275 seconds old.
2018-06-13T20:05:37.713Z,1528920337.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.525799 seconds old.
2018-06-13T20:05:37.714Z,1528920337.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:37.715Z,1528920337.715 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.525953 seconds old.
2018-06-13T20:05:37.716Z,1528920337.716 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.526290 seconds old.
2018-06-13T20:05:38.083Z,1528920338.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.895659 seconds old.
2018-06-13T20:05:38.084Z,1528920338.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:38.086Z,1528920338.086 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.896487 seconds old.
2018-06-13T20:05:38.087Z,1528920338.087 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.896849 seconds old.
2018-06-13T20:05:38.512Z,1528920338.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.324342 seconds old.
2018-06-13T20:05:38.513Z,1528920338.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:38.514Z,1528920338.514 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.324769 seconds old.
2018-06-13T20:05:38.515Z,1528920338.515 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.325111 seconds old.
2018-06-13T20:05:39.662Z,1528920339.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.474860 seconds old.
2018-06-13T20:05:39.663Z,1528920339.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:39.664Z,1528920339.664 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.474989 seconds old.
2018-06-13T20:05:39.665Z,1528920339.665 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.475524 seconds old.
2018-06-13T20:05:39.819Z,1528920339.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.631780 seconds old.
2018-06-13T20:05:39.820Z,1528920339.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:39.821Z,1528920339.821 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.632111 seconds old.
2018-06-13T20:05:39.822Z,1528920339.822 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.632468 seconds old.
2018-06-13T20:05:40.217Z,1528920340.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:40.619Z,1528920340.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:41.016Z,1528920341.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:41.414Z,1528920341.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:41.816Z,1528920341.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:42.218Z,1528920342.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:42.598Z,1528920342.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:43.026Z,1528920343.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:43.428Z,1528920343.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:44.596Z,1528920344.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:44.779Z,1528920344.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:45.173Z,1528920345.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:45.573Z,1528920345.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:45.978Z,1528920345.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:46.343Z,1528920346.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:46.743Z,1528920346.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:47.148Z,1528920347.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:47.548Z,1528920347.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:47.979Z,1528920347.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:48.376Z,1528920348.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:49.603Z,1528920349.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:49.781Z,1528920349.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:50.184Z,1528920350.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:50.578Z,1528920350.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:50.979Z,1528920350.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:51.373Z,1528920351.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:51.756Z,1528920351.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:52.156Z,1528920352.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:52.582Z,1528920352.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:52.993Z,1528920352.993 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:52.993Z,1528920352.993 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 332
2018-06-13T20:05:52.993Z,1528920352.993 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:05:52.995Z,1528920352.995 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:52.995Z,1528920352.995 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 332
2018-06-13T20:05:52.995Z,1528920352.995 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:05:52.997Z,1528920352.997 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:52.997Z,1528920352.997 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 332
2018-06-13T20:05:52.997Z,1528920352.997 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:05:53.077Z,1528920353.077 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:05:53.077Z,1528920353.077 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:05:53.078Z,1528920353.078 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:05:53.461Z,1528920353.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:05:53.461Z,1528920353.461 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 332
2018-06-13T20:05:53.462Z,1528920353.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:05:53.462Z,1528920353.462 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 332
2018-06-13T20:05:53.462Z,1528920353.462 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:05:53.462Z,1528920353.462 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 332
2018-06-13T20:05:54.600Z,1528920354.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:05:54.601Z,1528920354.601 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:05:54.602Z,1528920354.602 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:05:54.602Z,1528920354.602 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:05:54.602Z,1528920354.602 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:05:54.603Z,1528920354.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:05:54.603Z,1528920354.603 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:05:54.603Z,1528920354.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:05:54.604Z,1528920354.604 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:05:54.744Z,1528920354.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T20:05:54.749Z,1528920354.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:55.084Z,1528920355.084 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:05:55.161Z,1528920355.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T20:05:55.162Z,1528920355.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:55.554Z,1528920355.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T20:05:55.554Z,1528920355.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:55.950Z,1528920355.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T20:05:55.951Z,1528920355.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:56.324Z,1528920356.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T20:05:56.342Z,1528920356.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:56.724Z,1528920356.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T20:05:56.725Z,1528920356.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:57.128Z,1528920357.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T20:05:57.129Z,1528920357.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:57.532Z,1528920357.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T20:05:57.549Z,1528920357.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:57.959Z,1528920357.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T20:05:57.959Z,1528920357.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:58.351Z,1528920358.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T20:05:58.352Z,1528920358.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:59.556Z,1528920359.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T20:05:59.557Z,1528920359.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:05:59.686Z,1528920359.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T20:05:59.687Z,1528920359.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:00.124Z,1528920360.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T20:06:00.125Z,1528920360.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:00.520Z,1528920360.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T20:06:00.521Z,1528920360.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:00.913Z,1528920360.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T20:06:00.914Z,1528920360.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:01.316Z,1528920361.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T20:06:01.321Z,1528920361.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:01.728Z,1528920361.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T20:06:01.729Z,1528920361.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:02.096Z,1528920362.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T20:06:02.097Z,1528920362.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:02.524Z,1528920362.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T20:06:02.524Z,1528920362.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:03.674Z,1528920363.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T20:06:03.674Z,1528920363.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:03.835Z,1528920363.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T20:06:03.836Z,1528920363.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:04.244Z,1528920364.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T20:06:04.245Z,1528920364.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:04.635Z,1528920364.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T20:06:04.636Z,1528920364.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:05.027Z,1528920365.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T20:06:05.028Z,1528920365.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:05.425Z,1528920365.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T20:06:05.426Z,1528920365.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:05.828Z,1528920365.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T20:06:05.833Z,1528920365.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:06.209Z,1528920366.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T20:06:06.210Z,1528920366.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:06.613Z,1528920366.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T20:06:06.614Z,1528920366.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:07.042Z,1528920367.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T20:06:07.042Z,1528920367.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:07.419Z,1528920367.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T20:06:07.420Z,1528920367.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:08.611Z,1528920368.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T20:06:08.612Z,1528920368.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:08.755Z,1528920368.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T20:06:08.756Z,1528920368.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:09.152Z,1528920369.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T20:06:09.153Z,1528920369.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:09.558Z,1528920369.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T20:06:09.559Z,1528920369.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:09.954Z,1528920369.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T20:06:09.955Z,1528920369.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:10.345Z,1528920370.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T20:06:10.346Z,1528920370.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:10.760Z,1528920370.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T20:06:10.762Z,1528920370.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:11.128Z,1528920371.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T20:06:11.141Z,1528920371.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:11.569Z,1528920371.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T20:06:11.570Z,1528920371.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:12.068Z,1528920372.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T20:06:12.069Z,1528920372.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:14.029Z,1528920374.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:14.204Z,1528920374.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:14.606Z,1528920374.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:15.008Z,1528920375.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:15.387Z,1528920375.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:15.776Z,1528920375.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:16.176Z,1528920376.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:16.575Z,1528920376.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:17.012Z,1528920377.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:17.387Z,1528920377.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:18.574Z,1528920378.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:18.719Z,1528920378.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:19.115Z,1528920379.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:19.517Z,1528920379.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:19.915Z,1528920379.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:20.309Z,1528920380.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:20.689Z,1528920380.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:21.125Z,1528920381.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:21.522Z,1528920381.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:22.717Z,1528920382.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:22.869Z,1528920382.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:23.269Z,1528920383.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:23.673Z,1528920383.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:24.071Z,1528920384.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:24.468Z,1528920384.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:24.848Z,1528920384.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:25.250Z,1528920385.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:25.649Z,1528920385.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:26.088Z,1528920386.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:26.476Z,1528920386.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:27.684Z,1528920387.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:27.822Z,1528920387.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:28.230Z,1528920388.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:28.640Z,1528920388.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:29.030Z,1528920389.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:29.428Z,1528920389.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:29.836Z,1528920389.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:30.222Z,1528920390.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:30.634Z,1528920390.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:31.042Z,1528920391.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:31.437Z,1528920391.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:32.639Z,1528920392.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:32.791Z,1528920392.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:33.193Z,1528920393.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:33.598Z,1528920393.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:33.993Z,1528920393.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:34.381Z,1528920394.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:34.804Z,1528920394.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:35.194Z,1528920395.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:35.593Z,1528920395.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:36.753Z,1528920396.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:36.893Z,1528920396.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:37.304Z,1528920397.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:37.712Z,1528920397.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:38.101Z,1528920398.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:38.489Z,1528920398.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:38.891Z,1528920398.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:39.293Z,1528920399.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:39.693Z,1528920399.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:40.107Z,1528920400.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:40.502Z,1528920400.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:41.696Z,1528920401.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:41.847Z,1528920401.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:42.260Z,1528920402.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:42.664Z,1528920402.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:43.058Z,1528920403.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:43.448Z,1528920403.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:43.848Z,1528920403.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:44.247Z,1528920404.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:44.652Z,1528920404.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:45.068Z,1528920405.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:45.461Z,1528920405.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:46.663Z,1528920406.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:46.843Z,1528920406.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:47.239Z,1528920407.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:47.640Z,1528920407.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:48.046Z,1528920408.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:48.416Z,1528920408.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:48.817Z,1528920408.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:49.216Z,1528920409.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:49.622Z,1528920409.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:50.060Z,1528920410.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:50.427Z,1528920410.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:51.619Z,1528920411.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:51.742Z,1528920411.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:52.158Z,1528920412.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:52.563Z,1528920412.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:52.962Z,1528920412.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:53.357Z,1528920413.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:53.757Z,1528920413.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:54.173Z,1528920414.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:54.564Z,1528920414.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:55.717Z,1528920415.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:55.810Z,1528920415.810 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:06:55.879Z,1528920415.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:56.284Z,1528920416.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:56.680Z,1528920416.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:57.071Z,1528920417.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:57.472Z,1528920417.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:57.853Z,1528920417.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:58.256Z,1528920418.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:58.657Z,1528920418.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:59.086Z,1528920419.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:06:59.475Z,1528920419.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:00.649Z,1528920420.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:00.795Z,1528920420.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:01.196Z,1528920421.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:01.593Z,1528920421.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:01.992Z,1528920421.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:02.386Z,1528920422.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:02.785Z,1528920422.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:03.199Z,1528920423.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:03.592Z,1528920423.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:04.756Z,1528920424.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:04.907Z,1528920424.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:05.301Z,1528920425.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:05.715Z,1528920425.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:06.116Z,1528920426.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:06.500Z,1528920426.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:06.903Z,1528920426.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:07.299Z,1528920427.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:07.699Z,1528920427.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:08.116Z,1528920428.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:08.507Z,1528920428.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:09.707Z,1528920429.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:09.855Z,1528920429.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:10.249Z,1528920430.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:10.651Z,1528920430.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:11.047Z,1528920431.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:11.446Z,1528920431.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:11.861Z,1528920431.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:12.251Z,1528920432.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:12.660Z,1528920432.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:13.802Z,1528920433.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:13.955Z,1528920433.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:14.349Z,1528920434.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:14.750Z,1528920434.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:15.149Z,1528920435.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:15.544Z,1528920435.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:15.951Z,1528920435.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:16.328Z,1528920436.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:16.729Z,1528920436.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:17.161Z,1528920437.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:17.559Z,1528920437.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:18.731Z,1528920438.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:18.914Z,1528920438.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:19.315Z,1528920439.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:19.714Z,1528920439.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:20.112Z,1528920440.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:20.501Z,1528920440.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:20.907Z,1528920440.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:21.284Z,1528920441.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:21.687Z,1528920441.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:22.210Z,1528920442.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:22.535Z,1528920442.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:24.323Z,1528920444.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:24.493Z,1528920444.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:24.837Z,1528920444.837 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T20:07:24.838Z,1528920444.838 [NAL9602] Data Fault, FailCount= 1
2018-06-13T20:07:24.838Z,1528920444.838 [NAL9602](ERROR): Data Fault
2018-06-13T20:07:24.873Z,1528920444.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:24.969Z,1528920444.969 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T20:07:25.254Z,1528920445.254 [NAL9602](INFO): Powering down
2018-06-13T20:07:25.312Z,1528920445.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:25.676Z,1528920445.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:26.081Z,1528920446.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:26.165Z,1528920446.165 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T20:07:26.165Z,1528920446.165 [NAL9602] No Fault, FailCount= 1
2018-06-13T20:07:26.485Z,1528920446.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:26.877Z,1528920446.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:27.286Z,1528920447.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:27.684Z,1528920447.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:28.068Z,1528920448.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:28.492Z,1528920448.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:28.872Z,1528920448.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:29.271Z,1528920449.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:29.676Z,1528920449.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:30.072Z,1528920450.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:30.471Z,1528920450.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:30.872Z,1528920450.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:31.276Z,1528920451.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:31.672Z,1528920451.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:32.073Z,1528920452.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:32.480Z,1528920452.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:32.880Z,1528920452.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:33.275Z,1528920453.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:33.676Z,1528920453.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:34.074Z,1528920454.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:34.475Z,1528920454.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:34.875Z,1528920454.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:35.271Z,1528920455.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:35.682Z,1528920455.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:36.075Z,1528920456.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:36.475Z,1528920456.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:36.877Z,1528920456.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:37.275Z,1528920457.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:37.674Z,1528920457.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:38.074Z,1528920458.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:38.475Z,1528920458.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:38.874Z,1528920458.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:39.276Z,1528920459.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:39.674Z,1528920459.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:40.070Z,1528920460.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:40.473Z,1528920460.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:40.870Z,1528920460.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:41.272Z,1528920461.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:41.680Z,1528920461.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:42.080Z,1528920462.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:42.480Z,1528920462.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:42.880Z,1528920462.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:43.273Z,1528920463.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:43.680Z,1528920463.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:44.084Z,1528920464.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:44.473Z,1528920464.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:44.870Z,1528920464.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:45.275Z,1528920465.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:45.673Z,1528920465.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:46.070Z,1528920466.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:46.480Z,1528920466.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:46.874Z,1528920466.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:47.274Z,1528920467.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:47.680Z,1528920467.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:48.074Z,1528920468.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:48.474Z,1528920468.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:48.875Z,1528920468.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:49.273Z,1528920469.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:49.674Z,1528920469.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:50.075Z,1528920470.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:50.473Z,1528920470.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:50.875Z,1528920470.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:51.276Z,1528920471.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:51.673Z,1528920471.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:52.074Z,1528920472.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:52.476Z,1528920472.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:52.874Z,1528920472.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:53.274Z,1528920473.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:53.676Z,1528920473.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:54.073Z,1528920474.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:54.474Z,1528920474.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:54.875Z,1528920474.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:55.228Z,1528920475.228 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:07:55.278Z,1528920475.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:55.634Z,1528920475.634 [NAL9602](INFO): Powering up NAL9602
2018-06-13T20:07:55.680Z,1528920475.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:56.075Z,1528920476.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:56.473Z,1528920476.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:56.874Z,1528920476.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:57.318Z,1528920477.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:57.688Z,1528920477.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:58.142Z,1528920478.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:58.473Z,1528920478.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:58.944Z,1528920478.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:59.275Z,1528920479.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:07:59.677Z,1528920479.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:00.073Z,1528920480.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:00.480Z,1528920480.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:00.875Z,1528920480.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:01.272Z,1528920481.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:01.677Z,1528920481.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:02.074Z,1528920482.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:02.478Z,1528920482.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:02.880Z,1528920482.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:03.276Z,1528920483.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:03.673Z,1528920483.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:04.080Z,1528920484.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:04.480Z,1528920484.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:04.873Z,1528920484.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:05.275Z,1528920485.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:05.675Z,1528920485.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:06.077Z,1528920486.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:06.486Z,1528920486.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:06.834Z,1528920486.834 [NAL9602](INFO): NAL9602 initialized
2018-06-13T20:08:06.881Z,1528920486.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:07.284Z,1528920487.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:07.690Z,1528920487.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:08.089Z,1528920488.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:08.490Z,1528920488.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:08.884Z,1528920488.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:09.280Z,1528920489.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:09.682Z,1528920489.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:10.104Z,1528920490.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:10.496Z,1528920490.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:11.679Z,1528920491.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:11.832Z,1528920491.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:12.248Z,1528920492.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:12.640Z,1528920492.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:13.040Z,1528920493.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:13.432Z,1528920493.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:13.832Z,1528920493.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:14.243Z,1528920494.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:14.634Z,1528920494.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:15.790Z,1528920495.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:15.918Z,1528920495.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:16.338Z,1528920496.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:16.737Z,1528920496.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:17.143Z,1528920497.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:17.534Z,1528920497.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:17.949Z,1528920497.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:18.339Z,1528920498.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:19.511Z,1528920499.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:19.687Z,1528920499.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:20.085Z,1528920500.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:20.486Z,1528920500.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:20.884Z,1528920500.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:21.281Z,1528920501.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:21.674Z,1528920501.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:22.092Z,1528920502.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:22.488Z,1528920502.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:23.663Z,1528920503.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:23.823Z,1528920503.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:24.240Z,1528920504.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:24.650Z,1528920504.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:25.043Z,1528920505.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:25.438Z,1528920505.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:25.838Z,1528920505.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:26.254Z,1528920506.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:26.647Z,1528920506.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:27.793Z,1528920507.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:27.931Z,1528920507.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:28.349Z,1528920508.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:28.751Z,1528920508.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:29.150Z,1528920509.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:29.545Z,1528920509.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:29.962Z,1528920509.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:30.340Z,1528920510.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:30.754Z,1528920510.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:32.398Z,1528920512.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:32.559Z,1528920512.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:32.953Z,1528920512.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:33.356Z,1528920513.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:33.754Z,1528920513.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:34.150Z,1528920514.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:34.538Z,1528920514.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:34.966Z,1528920514.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:35.361Z,1528920515.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:36.522Z,1528920516.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:36.681Z,1528920516.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:37.088Z,1528920517.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:37.489Z,1528920517.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:37.889Z,1528920517.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:38.279Z,1528920518.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:38.685Z,1528920518.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:39.092Z,1528920519.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:39.492Z,1528920519.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:40.671Z,1528920520.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:40.832Z,1528920520.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:41.225Z,1528920521.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:41.629Z,1528920521.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:42.026Z,1528920522.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:42.426Z,1528920522.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:42.827Z,1528920522.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:43.238Z,1528920523.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:43.636Z,1528920523.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:44.791Z,1528920524.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:44.966Z,1528920524.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:45.371Z,1528920525.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:45.771Z,1528920525.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:46.155Z,1528920526.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:46.548Z,1528920526.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:46.952Z,1528920526.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:47.376Z,1528920527.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:47.747Z,1528920527.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:48.164Z,1528920528.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:49.331Z,1528920529.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:49.491Z,1528920529.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:49.894Z,1528920529.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:50.294Z,1528920530.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:50.688Z,1528920530.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:51.088Z,1528920531.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:51.472Z,1528920531.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:51.899Z,1528920531.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:52.316Z,1528920532.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:52.694Z,1528920532.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:53.871Z,1528920533.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:54.048Z,1528920534.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:54.453Z,1528920534.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:54.847Z,1528920534.847 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:54.847Z,1528920534.847 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 333
2018-06-13T20:08:54.847Z,1528920534.847 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:08:54.850Z,1528920534.850 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:54.850Z,1528920534.850 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 333
2018-06-13T20:08:54.850Z,1528920534.850 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:08:54.852Z,1528920534.852 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:54.852Z,1528920534.852 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 333
2018-06-13T20:08:54.852Z,1528920534.852 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:08:54.929Z,1528920534.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:08:54.929Z,1528920534.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:08:54.930Z,1528920534.930 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:08:55.329Z,1528920535.329 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:08:55.329Z,1528920535.329 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 333
2018-06-13T20:08:55.330Z,1528920535.330 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:08:55.330Z,1528920535.330 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 333
2018-06-13T20:08:55.330Z,1528920535.330 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:08:55.330Z,1528920535.330 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 333
2018-06-13T20:08:55.584Z,1528920535.584 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:08:55.641Z,1528920535.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:08:55.642Z,1528920535.642 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:08:55.642Z,1528920535.642 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:08:55.643Z,1528920535.643 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:08:55.643Z,1528920535.643 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:08:55.643Z,1528920535.643 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:08:55.644Z,1528920535.644 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:08:55.644Z,1528920535.644 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:08:55.644Z,1528920535.644 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:08:56.027Z,1528920536.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T20:08:56.028Z,1528920536.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:56.424Z,1528920536.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T20:08:56.425Z,1528920536.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:56.832Z,1528920536.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T20:08:56.833Z,1528920536.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:57.257Z,1528920537.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T20:08:57.258Z,1528920537.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:57.658Z,1528920537.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T20:08:57.659Z,1528920537.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:58.872Z,1528920538.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T20:08:58.873Z,1528920538.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:59.023Z,1528920539.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T20:08:59.023Z,1528920539.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:59.418Z,1528920539.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T20:08:59.419Z,1528920539.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:08:59.822Z,1528920539.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T20:08:59.822Z,1528920539.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:00.220Z,1528920540.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T20:09:00.221Z,1528920540.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:00.613Z,1528920540.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T20:09:00.614Z,1528920540.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:01.036Z,1528920541.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T20:09:01.037Z,1528920541.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:01.409Z,1528920541.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T20:09:01.410Z,1528920541.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:01.825Z,1528920541.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T20:09:01.826Z,1528920541.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:02.984Z,1528920542.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T20:09:02.985Z,1528920542.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:03.126Z,1528920543.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T20:09:03.127Z,1528920543.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:03.529Z,1528920543.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T20:09:03.530Z,1528920543.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:03.929Z,1528920543.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T20:09:03.930Z,1528920543.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:04.331Z,1528920544.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T20:09:04.332Z,1528920544.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:04.719Z,1528920544.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T20:09:04.720Z,1528920544.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:05.125Z,1528920545.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T20:09:05.126Z,1528920545.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:05.529Z,1528920545.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T20:09:05.530Z,1528920545.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:05.909Z,1528920545.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T20:09:05.910Z,1528920545.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:06.336Z,1528920546.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T20:09:06.336Z,1528920546.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:06.735Z,1528920546.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T20:09:06.736Z,1528920546.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:08.750Z,1528920548.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T20:09:08.751Z,1528920548.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:08.899Z,1528920548.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T20:09:08.900Z,1528920548.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:09.292Z,1528920549.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T20:09:09.293Z,1528920549.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:09.692Z,1528920549.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T20:09:09.693Z,1528920549.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:10.090Z,1528920550.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T20:09:10.091Z,1528920550.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:10.485Z,1528920550.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T20:09:10.486Z,1528920550.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:10.894Z,1528920550.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T20:09:10.895Z,1528920550.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:11.301Z,1528920551.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T20:09:11.302Z,1528920551.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:11.692Z,1528920551.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T20:09:11.693Z,1528920551.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:12.852Z,1528920552.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T20:09:12.853Z,1528920552.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:12.994Z,1528920552.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T20:09:12.995Z,1528920552.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:13.396Z,1528920553.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T20:09:13.398Z,1528920553.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:13.798Z,1528920553.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T20:09:13.798Z,1528920553.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:14.194Z,1528920554.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T20:09:14.195Z,1528920554.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:14.594Z,1528920554.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T20:09:14.594Z,1528920554.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:14.996Z,1528920554.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:15.409Z,1528920555.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:15.793Z,1528920555.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:16.198Z,1528920556.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:17.359Z,1528920557.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:17.515Z,1528920557.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:17.915Z,1528920557.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:18.317Z,1528920558.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:18.716Z,1528920558.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:19.114Z,1528920559.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:19.508Z,1528920559.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:19.910Z,1528920559.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:20.334Z,1528920560.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:20.738Z,1528920560.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:21.945Z,1528920561.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:22.103Z,1528920562.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:22.494Z,1528920562.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:22.898Z,1528920562.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:23.296Z,1528920563.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:23.696Z,1528920563.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:24.076Z,1528920564.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:24.476Z,1528920564.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:24.900Z,1528920564.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:25.310Z,1528920565.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:25.703Z,1528920565.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:26.910Z,1528920566.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:27.067Z,1528920567.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:27.467Z,1528920567.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:27.869Z,1528920567.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:28.278Z,1528920568.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:28.661Z,1528920568.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:29.077Z,1528920569.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:29.444Z,1528920569.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:29.876Z,1528920569.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:31.033Z,1528920571.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:31.158Z,1528920571.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:31.575Z,1528920571.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:31.981Z,1528920571.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:32.378Z,1528920572.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:32.772Z,1528920572.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:33.156Z,1528920573.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:33.556Z,1528920573.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:33.981Z,1528920573.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:34.396Z,1528920574.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:34.780Z,1528920574.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:35.950Z,1528920575.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:36.100Z,1528920576.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:36.496Z,1528920576.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:36.899Z,1528920576.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:37.298Z,1528920577.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:37.689Z,1528920577.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:38.103Z,1528920578.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:38.485Z,1528920578.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:38.899Z,1528920578.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:40.077Z,1528920580.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:40.236Z,1528920580.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:40.634Z,1528920580.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:41.038Z,1528920581.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:41.435Z,1528920581.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:41.830Z,1528920581.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:42.236Z,1528920582.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:42.626Z,1528920582.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:43.035Z,1528920583.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:43.447Z,1528920583.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:43.850Z,1528920583.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:45.240Z,1528920585.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:45.400Z,1528920585.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:45.796Z,1528920585.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:46.198Z,1528920586.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:46.599Z,1528920586.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:46.992Z,1528920586.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:47.393Z,1528920587.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:47.785Z,1528920587.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:48.209Z,1528920588.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:48.604Z,1528920588.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:49.806Z,1528920589.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:49.955Z,1528920589.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:50.359Z,1528920590.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:50.764Z,1528920590.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:51.172Z,1528920591.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:51.559Z,1528920591.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:51.952Z,1528920591.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:52.368Z,1528920592.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:52.763Z,1528920592.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:53.168Z,1528920593.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:54.356Z,1528920594.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:54.507Z,1528920594.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:54.903Z,1528920594.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:55.305Z,1528920595.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:55.644Z,1528920595.644 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:09:55.717Z,1528920595.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:56.104Z,1528920596.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:56.484Z,1528920596.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:56.912Z,1528920596.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:57.324Z,1528920597.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:57.720Z,1528920597.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:58.876Z,1528920598.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:59.036Z,1528920599.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:59.422Z,1528920599.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:09:59.822Z,1528920599.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:00.223Z,1528920600.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:00.616Z,1528920600.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:01.020Z,1528920601.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:01.432Z,1528920601.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:01.815Z,1528920601.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:02.223Z,1528920602.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:03.415Z,1528920603.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:03.570Z,1528920603.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:03.966Z,1528920603.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:04.372Z,1528920604.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:04.772Z,1528920604.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:05.168Z,1528920605.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:05.570Z,1528920605.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:05.958Z,1528920605.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:06.380Z,1528920606.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:06.777Z,1528920606.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:07.974Z,1528920607.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:08.115Z,1528920608.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:08.519Z,1528920608.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:08.920Z,1528920608.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:09.317Z,1528920609.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:09.714Z,1528920609.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:10.131Z,1528920610.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:10.520Z,1528920610.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:10.928Z,1528920610.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:12.078Z,1528920612.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:12.227Z,1528920612.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:12.616Z,1528920612.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:13.019Z,1528920613.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:13.439Z,1528920613.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:13.812Z,1528920613.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:14.211Z,1528920614.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:14.613Z,1528920614.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:15.020Z,1528920615.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:15.447Z,1528920615.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:15.843Z,1528920615.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:18.057Z,1528920618.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:18.198Z,1528920618.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:18.605Z,1528920618.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:19.007Z,1528920619.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:19.408Z,1528920619.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:19.798Z,1528920619.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:20.182Z,1528920620.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:20.582Z,1528920620.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:20.986Z,1528920620.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:21.421Z,1528920621.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:21.815Z,1528920621.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:23.031Z,1528920623.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:23.175Z,1528920623.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:23.569Z,1528920623.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:23.994Z,1528920623.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:24.379Z,1528920624.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:24.766Z,1528920624.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:25.168Z,1528920625.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:25.556Z,1528920625.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:25.974Z,1528920625.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:26.385Z,1528920626.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:26.775Z,1528920626.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:27.981Z,1528920627.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:28.121Z,1528920628.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:28.528Z,1528920628.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:28.922Z,1528920628.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:29.318Z,1528920629.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:29.717Z,1528920629.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:30.113Z,1528920630.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:30.530Z,1528920630.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:30.928Z,1528920630.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:32.122Z,1528920632.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:32.279Z,1528920632.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:32.673Z,1528920632.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:33.073Z,1528920633.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:33.475Z,1528920633.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:33.869Z,1528920633.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:34.252Z,1528920634.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:34.652Z,1528920634.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:35.074Z,1528920635.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:35.484Z,1528920635.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:35.879Z,1528920635.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:37.051Z,1528920637.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:37.218Z,1528920637.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:37.633Z,1528920637.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:38.036Z,1528920638.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:38.427Z,1528920638.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:38.823Z,1528920638.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:39.239Z,1528920639.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:39.604Z,1528920639.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:40.011Z,1528920640.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:40.437Z,1528920640.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:40.837Z,1528920640.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:42.035Z,1528920642.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:42.158Z,1528920642.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:42.582Z,1528920642.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:42.990Z,1528920642.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:43.396Z,1528920643.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:43.781Z,1528920643.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:44.205Z,1528920644.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:44.564Z,1528920644.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:44.986Z,1528920644.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:46.189Z,1528920646.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:46.351Z,1528920646.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:46.745Z,1528920646.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:47.145Z,1528920647.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:47.543Z,1528920647.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:47.942Z,1528920647.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:48.347Z,1528920648.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:48.741Z,1528920648.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:49.150Z,1528920649.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:49.557Z,1528920649.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:49.955Z,1528920649.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:51.156Z,1528920651.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:51.286Z,1528920651.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:51.707Z,1528920651.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:52.115Z,1528920652.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:52.509Z,1528920652.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:52.912Z,1528920652.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:53.316Z,1528920653.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:53.692Z,1528920653.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:54.092Z,1528920654.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:54.525Z,1528920654.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:54.894Z,1528920654.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:56.217Z,1528920656.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:56.310Z,1528920656.310 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:10:56.383Z,1528920656.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:56.774Z,1528920656.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:57.180Z,1528920657.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:57.576Z,1528920657.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:57.969Z,1528920657.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:58.370Z,1528920658.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:58.772Z,1528920658.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:59.184Z,1528920659.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:10:59.580Z,1528920659.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:00.778Z,1528920660.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:00.894Z,1528920660.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:01.328Z,1528920661.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:01.722Z,1528920661.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:02.118Z,1528920662.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:02.516Z,1528920662.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:02.917Z,1528920662.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:03.334Z,1528920663.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:03.724Z,1528920663.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:04.888Z,1528920664.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:05.048Z,1528920665.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:05.435Z,1528920665.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:05.835Z,1528920665.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:06.238Z,1528920666.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:06.626Z,1528920666.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:07.027Z,1528920667.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:07.444Z,1528920667.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:07.851Z,1528920667.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:09.026Z,1528920669.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:09.176Z,1528920669.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:09.568Z,1528920669.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:09.974Z,1528920669.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:10.368Z,1528920670.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:10.776Z,1528920670.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:11.149Z,1528920671.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:11.583Z,1528920671.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:11.976Z,1528920671.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:12.384Z,1528920672.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:13.543Z,1528920673.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:13.691Z,1528920673.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:14.097Z,1528920674.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:14.504Z,1528920674.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:14.902Z,1528920674.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:15.288Z,1528920675.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:15.690Z,1528920675.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:16.092Z,1528920676.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:16.508Z,1528920676.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:16.899Z,1528920676.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:18.139Z,1528920678.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:18.296Z,1528920678.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:18.699Z,1528920678.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:19.091Z,1528920679.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:19.493Z,1528920679.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:19.888Z,1528920679.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:20.272Z,1528920680.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:20.676Z,1528920680.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:21.076Z,1528920681.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:21.503Z,1528920681.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:21.907Z,1528920681.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:23.104Z,1528920683.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:23.268Z,1528920683.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:23.668Z,1528920683.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:24.068Z,1528920684.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:24.461Z,1528920684.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:24.862Z,1528920684.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:25.277Z,1528920685.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:25.637Z,1528920685.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:26.073Z,1528920686.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:27.235Z,1528920687.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:27.379Z,1528920687.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:27.792Z,1528920687.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:28.185Z,1528920688.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:28.587Z,1528920688.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:28.976Z,1528920688.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:29.378Z,1528920689.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:29.773Z,1528920689.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:30.184Z,1528920690.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:30.595Z,1528920690.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:30.986Z,1528920690.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:32.176Z,1528920692.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:32.328Z,1528920692.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:32.723Z,1528920692.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:33.128Z,1528920693.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:33.529Z,1528920693.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:33.922Z,1528920693.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:34.324Z,1528920694.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:34.716Z,1528920694.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:35.122Z,1528920695.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:35.537Z,1528920695.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:35.927Z,1528920695.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:37.096Z,1528920697.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:37.243Z,1528920697.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:37.644Z,1528920697.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:38.041Z,1528920698.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:38.438Z,1528920698.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:38.833Z,1528920698.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:39.249Z,1528920699.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:39.625Z,1528920699.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:40.042Z,1528920700.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:41.216Z,1528920701.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:41.370Z,1528920701.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:41.799Z,1528920701.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:42.206Z,1528920702.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:42.600Z,1528920702.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:43.004Z,1528920703.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:43.380Z,1528920703.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:43.779Z,1528920703.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:44.180Z,1528920704.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:44.611Z,1528920704.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:45.006Z,1528920705.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:46.179Z,1528920706.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:46.323Z,1528920706.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:46.727Z,1528920706.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:47.128Z,1528920707.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:47.527Z,1528920707.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:47.918Z,1528920707.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:48.316Z,1528920708.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:48.716Z,1528920708.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:49.116Z,1528920709.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:49.540Z,1528920709.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:49.927Z,1528920709.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:51.173Z,1528920711.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:51.323Z,1528920711.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:51.714Z,1528920711.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:52.123Z,1528920712.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:52.528Z,1528920712.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:52.913Z,1528920712.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:53.316Z,1528920713.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:53.704Z,1528920713.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:54.113Z,1528920714.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:54.526Z,1528920714.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:54.914Z,1528920714.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:56.129Z,1528920716.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:56.129Z,1528920716.129 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 334
2018-06-13T20:11:56.129Z,1528920716.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:11:56.131Z,1528920716.131 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:56.131Z,1528920716.131 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 334
2018-06-13T20:11:56.131Z,1528920716.131 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:11:56.133Z,1528920716.133 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:56.133Z,1528920716.133 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 334
2018-06-13T20:11:56.133Z,1528920716.133 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:11:56.209Z,1528920716.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:11:56.209Z,1528920716.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:11:56.209Z,1528920716.209 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:11:56.214Z,1528920716.214 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:11:56.369Z,1528920716.369 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:11:56.369Z,1528920716.369 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 334
2018-06-13T20:11:56.369Z,1528920716.369 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:11:56.370Z,1528920716.370 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 334
2018-06-13T20:11:56.370Z,1528920716.370 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:11:56.370Z,1528920716.370 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 334
2018-06-13T20:11:56.686Z,1528920716.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:11:56.686Z,1528920716.686 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:11:56.687Z,1528920716.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:11:56.687Z,1528920716.687 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:11:56.687Z,1528920716.687 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:11:56.688Z,1528920716.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:11:56.688Z,1528920716.688 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:11:56.688Z,1528920716.688 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:11:56.689Z,1528920716.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:11:57.091Z,1528920717.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T20:11:57.092Z,1528920717.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:57.466Z,1528920717.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-06-13T20:11:57.467Z,1528920717.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:57.860Z,1528920717.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T20:11:57.862Z,1528920717.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:58.291Z,1528920718.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T20:11:58.292Z,1528920718.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:58.659Z,1528920718.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T20:11:58.660Z,1528920718.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:11:59.071Z,1528920719.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T20:11:59.072Z,1528920719.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:00.245Z,1528920720.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T20:12:00.246Z,1528920720.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:00.407Z,1528920720.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-06-13T20:12:00.408Z,1528920720.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:00.804Z,1528920720.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2018-06-13T20:12:00.806Z,1528920720.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:01.201Z,1528920721.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-06-13T20:12:01.202Z,1528920721.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:01.643Z,1528920721.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T20:12:01.644Z,1528920721.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:02.002Z,1528920722.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T20:12:02.002Z,1528920722.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:02.545Z,1528920722.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T20:12:02.561Z,1528920722.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:02.872Z,1528920722.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T20:12:02.897Z,1528920722.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:03.273Z,1528920723.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T20:12:03.274Z,1528920723.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:03.679Z,1528920723.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T20:12:03.680Z,1528920723.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:03.990Z,1528920723.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T20:12:03.991Z,1528920723.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:05.176Z,1528920725.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T20:12:05.177Z,1528920725.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:05.333Z,1528920725.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T20:12:05.334Z,1528920725.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:05.721Z,1528920725.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T20:12:05.722Z,1528920725.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:06.136Z,1528920726.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T20:12:06.141Z,1528920726.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:06.523Z,1528920726.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T20:12:06.524Z,1528920726.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:06.924Z,1528920726.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T20:12:06.926Z,1528920726.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:07.337Z,1528920727.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T20:12:07.338Z,1528920727.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:07.704Z,1528920727.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T20:12:07.705Z,1528920727.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:08.115Z,1528920728.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T20:12:08.116Z,1528920728.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:08.516Z,1528920728.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T20:12:08.517Z,1528920728.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:09.691Z,1528920729.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T20:12:09.692Z,1528920729.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:09.824Z,1528920729.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T20:12:09.841Z,1528920729.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:10.252Z,1528920730.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T20:12:10.257Z,1528920730.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:10.650Z,1528920730.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T20:12:10.651Z,1528920730.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:11.058Z,1528920731.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T20:12:11.059Z,1528920731.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:11.428Z,1528920731.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T20:12:11.429Z,1528920731.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:11.827Z,1528920731.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T20:12:11.828Z,1528920731.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:12.252Z,1528920732.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T20:12:12.257Z,1528920732.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:12.667Z,1528920732.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T20:12:12.668Z,1528920732.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:13.040Z,1528920733.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T20:12:13.041Z,1528920733.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:14.219Z,1528920734.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T20:12:14.220Z,1528920734.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:14.379Z,1528920734.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T20:12:14.380Z,1528920734.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:14.770Z,1528920734.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T20:12:14.771Z,1528920734.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:15.181Z,1528920735.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T20:12:15.182Z,1528920735.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:15.572Z,1528920735.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T20:12:15.573Z,1528920735.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:15.969Z,1528920735.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T20:12:15.970Z,1528920735.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:16.356Z,1528920736.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:16.752Z,1528920736.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:17.157Z,1528920737.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:17.584Z,1528920737.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:17.975Z,1528920737.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:19.193Z,1528920739.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:19.343Z,1528920739.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:19.741Z,1528920739.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:20.140Z,1528920740.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:20.542Z,1528920740.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:20.940Z,1528920740.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:21.351Z,1528920741.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:21.716Z,1528920741.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:22.148Z,1528920742.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:23.294Z,1528920743.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:23.439Z,1528920743.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:23.849Z,1528920743.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:24.251Z,1528920744.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:24.660Z,1528920744.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:25.046Z,1528920745.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:25.447Z,1528920745.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:25.828Z,1528920745.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:26.243Z,1528920746.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:26.660Z,1528920746.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:27.056Z,1528920747.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:28.226Z,1528920748.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:28.407Z,1528920748.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:28.807Z,1528920748.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:29.204Z,1528920749.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:29.603Z,1528920749.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:29.992Z,1528920749.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:30.382Z,1528920750.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:30.781Z,1528920750.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:31.181Z,1528920751.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:31.619Z,1528920751.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:32.006Z,1528920752.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:33.174Z,1528920753.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:33.332Z,1528920753.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:33.728Z,1528920753.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:34.124Z,1528920754.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:34.525Z,1528920754.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:34.915Z,1528920754.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:35.335Z,1528920755.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:35.712Z,1528920755.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:36.132Z,1528920756.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:37.300Z,1528920757.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:37.430Z,1528920757.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:37.859Z,1528920757.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:38.272Z,1528920758.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:38.661Z,1528920758.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:39.060Z,1528920759.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:39.444Z,1528920759.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:39.841Z,1528920759.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:40.245Z,1528920760.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:40.676Z,1528920760.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:41.063Z,1528920761.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:43.671Z,1528920763.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:43.818Z,1528920763.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:44.240Z,1528920764.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:44.638Z,1528920764.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:45.033Z,1528920765.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:45.428Z,1528920765.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:45.832Z,1528920765.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:46.239Z,1528920766.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:46.642Z,1528920766.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:47.044Z,1528920767.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:48.235Z,1528920768.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:48.391Z,1528920768.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:48.790Z,1528920768.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:49.187Z,1528920769.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:49.590Z,1528920769.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:49.968Z,1528920769.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:50.394Z,1528920770.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:50.765Z,1528920770.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:51.189Z,1528920771.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:52.335Z,1528920772.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:52.496Z,1528920772.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:52.898Z,1528920772.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:53.296Z,1528920773.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:53.690Z,1528920773.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:54.088Z,1528920774.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:54.485Z,1528920774.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:54.896Z,1528920774.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:55.278Z,1528920775.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:55.706Z,1528920775.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:56.105Z,1528920776.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:56.432Z,1528920776.432 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:12:57.261Z,1528920777.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:57.432Z,1528920777.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:57.831Z,1528920777.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:58.230Z,1528920778.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:58.650Z,1528920778.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:59.020Z,1528920779.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:59.417Z,1528920779.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:12:59.818Z,1528920779.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:00.217Z,1528920780.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:00.632Z,1528920780.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:01.030Z,1528920781.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:02.213Z,1528920782.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:02.362Z,1528920782.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:02.758Z,1528920782.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:03.162Z,1528920783.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:03.568Z,1528920783.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:03.957Z,1528920783.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:04.358Z,1528920784.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:04.778Z,1528920784.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:05.171Z,1528920785.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:06.321Z,1528920786.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:06.471Z,1528920786.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:06.866Z,1528920786.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:07.268Z,1528920787.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:07.668Z,1528920787.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:08.062Z,1528920788.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:08.468Z,1528920788.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:08.840Z,1528920788.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:09.266Z,1528920789.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:09.674Z,1528920789.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:10.066Z,1528920790.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:11.267Z,1528920791.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:11.416Z,1528920791.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:11.818Z,1528920791.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:12.223Z,1528920792.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:12.616Z,1528920792.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:13.017Z,1528920793.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:13.436Z,1528920793.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:13.792Z,1528920793.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:14.197Z,1528920794.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:14.625Z,1528920794.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:15.784Z,1528920795.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:15.929Z,1528920795.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:16.329Z,1528920796.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:16.734Z,1528920796.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:17.128Z,1528920797.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:17.535Z,1528920797.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:17.921Z,1528920797.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:18.329Z,1528920798.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:18.741Z,1528920798.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:19.135Z,1528920799.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:20.306Z,1528920800.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:20.456Z,1528920800.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:20.853Z,1528920800.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:21.256Z,1528920801.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:21.654Z,1528920801.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:22.048Z,1528920802.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:22.462Z,1528920802.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:22.849Z,1528920802.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:23.245Z,1528920803.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:23.665Z,1528920803.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:24.054Z,1528920804.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:25.267Z,1528920805.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:25.441Z,1528920805.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:25.844Z,1528920805.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:26.228Z,1528920806.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:26.627Z,1528920806.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:27.019Z,1528920807.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:27.455Z,1528920807.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:27.819Z,1528920807.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:28.228Z,1528920808.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:29.398Z,1528920809.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:29.528Z,1528920809.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:29.960Z,1528920809.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:30.364Z,1528920810.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:30.755Z,1528920810.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:31.152Z,1528920811.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:31.536Z,1528920811.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:31.935Z,1528920811.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:32.334Z,1528920812.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:32.768Z,1528920812.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:33.159Z,1528920813.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:34.339Z,1528920814.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:34.515Z,1528920814.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:34.914Z,1528920814.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:35.313Z,1528920815.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:35.714Z,1528920815.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:36.110Z,1528920816.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:36.513Z,1528920816.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:36.905Z,1528920816.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:37.316Z,1528920817.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:37.726Z,1528920817.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:38.121Z,1528920818.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:39.284Z,1528920819.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:39.434Z,1528920819.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:39.828Z,1528920819.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:40.228Z,1528920820.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:40.627Z,1528920820.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:41.022Z,1528920821.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:41.438Z,1528920821.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:41.821Z,1528920821.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:42.231Z,1528920822.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:42.640Z,1528920822.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:43.834Z,1528920823.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:43.983Z,1528920823.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:44.388Z,1528920824.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:44.792Z,1528920824.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:45.182Z,1528920825.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:45.584Z,1528920825.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:45.981Z,1528920825.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:46.368Z,1528920826.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:46.797Z,1528920826.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:47.194Z,1528920827.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:48.416Z,1528920828.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:48.589Z,1528920828.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:48.991Z,1528920828.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:49.400Z,1528920829.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:49.775Z,1528920829.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:50.165Z,1528920830.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:50.565Z,1528920830.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:50.966Z,1528920830.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:51.366Z,1528920831.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:51.847Z,1528920831.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:52.176Z,1528920832.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:53.947Z,1528920833.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:54.107Z,1528920834.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:54.508Z,1528920834.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:54.902Z,1528920834.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:55.302Z,1528920835.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:55.700Z,1528920835.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:56.098Z,1528920836.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:56.510Z,1528920836.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:56.840Z,1528920836.840 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:13:56.920Z,1528920836.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:58.069Z,1528920838.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:58.254Z,1528920838.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:58.618Z,1528920838.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:59.024Z,1528920839.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:59.419Z,1528920839.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:13:59.805Z,1528920839.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:00.208Z,1528920840.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:00.629Z,1528920840.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:01.018Z,1528920841.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:02.165Z,1528920842.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:02.323Z,1528920842.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:02.716Z,1528920842.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:03.110Z,1528920843.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:03.525Z,1528920843.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:03.908Z,1528920843.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:04.298Z,1528920844.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:04.722Z,1528920844.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:05.110Z,1528920845.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:06.271Z,1528920846.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:06.420Z,1528920846.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:06.844Z,1528920846.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:07.242Z,1528920847.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:07.651Z,1528920847.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:08.024Z,1528920848.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:08.428Z,1528920848.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:08.850Z,1528920848.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:09.252Z,1528920849.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:10.454Z,1528920850.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:10.598Z,1528920850.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:11.014Z,1528920851.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:11.410Z,1528920851.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:11.805Z,1528920851.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:12.204Z,1528920852.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:12.608Z,1528920852.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:13.005Z,1528920853.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:13.404Z,1528920853.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:13.820Z,1528920853.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:14.213Z,1528920854.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:15.452Z,1528920855.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:15.605Z,1528920855.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:16.014Z,1528920856.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:16.413Z,1528920856.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:16.814Z,1528920856.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:17.203Z,1528920857.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:17.606Z,1528920857.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:18.007Z,1528920858.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:18.410Z,1528920858.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:18.824Z,1528920858.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:19.220Z,1528920859.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:20.423Z,1528920860.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:20.572Z,1528920860.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:20.971Z,1528920860.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:21.372Z,1528920861.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:21.769Z,1528920861.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:22.160Z,1528920862.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:22.559Z,1528920862.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:22.965Z,1528920862.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:23.368Z,1528920863.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:23.780Z,1528920863.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:24.173Z,1528920864.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:25.409Z,1528920865.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:25.574Z,1528920865.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:25.970Z,1528920865.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:26.372Z,1528920866.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:26.847Z,1528920866.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:27.203Z,1528920867.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:27.609Z,1528920867.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:27.995Z,1528920867.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:28.384Z,1528920868.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:28.783Z,1528920868.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:29.177Z,1528920869.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:30.334Z,1528920870.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:30.466Z,1528920870.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:30.880Z,1528920870.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:31.285Z,1528920871.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:31.687Z,1528920871.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:32.072Z,1528920872.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:32.475Z,1528920872.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:32.892Z,1528920872.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:33.292Z,1528920873.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:34.442Z,1528920874.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:34.601Z,1528920874.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:34.989Z,1528920874.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:35.392Z,1528920875.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:35.796Z,1528920875.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:36.176Z,1528920876.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:36.583Z,1528920876.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:36.982Z,1528920876.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:37.381Z,1528920877.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:37.804Z,1528920877.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:38.190Z,1528920878.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:39.379Z,1528920879.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:39.536Z,1528920879.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:39.937Z,1528920879.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:40.337Z,1528920880.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:40.732Z,1528920880.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:41.136Z,1528920881.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:41.552Z,1528920881.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:41.916Z,1528920881.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:42.343Z,1528920882.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:43.505Z,1528920883.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:43.634Z,1528920883.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:44.057Z,1528920884.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:44.452Z,1528920884.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:44.864Z,1528920884.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:45.244Z,1528920885.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:45.646Z,1528920885.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:46.046Z,1528920886.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:46.445Z,1528920886.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:46.868Z,1528920886.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:47.254Z,1528920887.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:48.453Z,1528920888.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:48.601Z,1528920888.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:48.000Z,1528920889.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:49.399Z,1528920889.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:49.802Z,1528920889.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:50.195Z,1528920890.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:50.599Z,1528920890.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:50.976Z,1528920890.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:51.398Z,1528920891.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:51.817Z,1528920891.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:52.212Z,1528920892.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:53.423Z,1528920893.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:53.567Z,1528920893.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:53.965Z,1528920893.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:54.366Z,1528920894.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:54.770Z,1528920894.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:55.157Z,1528920895.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:55.580Z,1528920895.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:55.964Z,1528920895.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:56.376Z,1528920896.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:56.705Z,1528920896.705 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:14:57.525Z,1528920897.525 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:57.525Z,1528920897.525 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 335
2018-06-13T20:14:57.525Z,1528920897.525 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:14:57.527Z,1528920897.527 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:57.527Z,1528920897.527 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 335
2018-06-13T20:14:57.527Z,1528920897.527 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:14:57.529Z,1528920897.529 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:57.529Z,1528920897.529 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 335
2018-06-13T20:14:57.529Z,1528920897.529 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:14:57.621Z,1528920897.621 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:14:57.622Z,1528920897.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:14:57.622Z,1528920897.622 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:14:57.749Z,1528920897.749 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:14:57.749Z,1528920897.749 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 335
2018-06-13T20:14:57.750Z,1528920897.750 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:14:57.750Z,1528920897.750 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 335
2018-06-13T20:14:57.750Z,1528920897.750 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:14:57.750Z,1528920897.750 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 335
2018-06-13T20:14:58.089Z,1528920898.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:14:58.089Z,1528920898.089 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:14:58.090Z,1528920898.090 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:14:58.090Z,1528920898.090 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:14:58.090Z,1528920898.090 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:14:58.091Z,1528920898.091 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:14:58.091Z,1528920898.091 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:14:58.091Z,1528920898.091 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:14:58.092Z,1528920898.092 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:14:58.495Z,1528920898.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T20:14:58.496Z,1528920898.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:58.891Z,1528920898.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T20:14:58.892Z,1528920898.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:59.288Z,1528920899.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T20:14:59.293Z,1528920899.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:14:59.668Z,1528920899.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T20:14:59.668Z,1528920899.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:00.072Z,1528920900.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T20:15:00.089Z,1528920900.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:00.476Z,1528920900.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T20:15:00.493Z,1528920900.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:00.902Z,1528920900.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T20:15:00.903Z,1528920900.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:01.302Z,1528920901.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T20:15:01.302Z,1528920901.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:03.805Z,1528920903.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T20:15:03.806Z,1528920903.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:03.963Z,1528920903.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T20:15:03.964Z,1528920903.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:04.363Z,1528920904.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T20:15:04.364Z,1528920904.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:04.762Z,1528920904.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T20:15:04.763Z,1528920904.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:05.167Z,1528920905.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T20:15:05.168Z,1528920905.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:05.569Z,1528920905.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T20:15:05.570Z,1528920905.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:05.949Z,1528920905.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T20:15:05.950Z,1528920905.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:06.344Z,1528920906.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T20:15:06.345Z,1528920906.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:06.779Z,1528920906.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T20:15:06.780Z,1528920906.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:07.156Z,1528920907.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T20:15:07.177Z,1528920907.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:08.328Z,1528920908.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T20:15:08.329Z,1528920908.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:08.483Z,1528920908.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T20:15:08.484Z,1528920908.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:08.888Z,1528920908.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T20:15:08.889Z,1528920908.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:09.286Z,1528920909.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2018-06-13T20:15:09.287Z,1528920909.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:09.682Z,1528920909.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T20:15:09.683Z,1528920909.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:10.091Z,1528920910.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T20:15:10.091Z,1528920910.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:10.459Z,1528920910.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T20:15:10.460Z,1528920910.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:10.900Z,1528920910.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T20:15:10.901Z,1528920910.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:11.312Z,1528920911.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T20:15:11.313Z,1528920911.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:11.689Z,1528920911.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T20:15:11.690Z,1528920911.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:12.863Z,1528920912.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T20:15:12.863Z,1528920912.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:13.051Z,1528920913.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T20:15:13.052Z,1528920913.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:13.448Z,1528920913.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T20:15:13.449Z,1528920913.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:13.852Z,1528920913.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-06-13T20:15:13.857Z,1528920913.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:14.243Z,1528920914.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-06-13T20:15:14.244Z,1528920914.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:14.636Z,1528920914.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T20:15:14.637Z,1528920914.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:15.052Z,1528920915.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T20:15:15.057Z,1528920915.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:15.423Z,1528920915.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T20:15:15.424Z,1528920915.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:15.860Z,1528920915.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T20:15:15.861Z,1528920915.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:16.254Z,1528920916.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T20:15:16.255Z,1528920916.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:17.427Z,1528920917.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T20:15:17.428Z,1528920917.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:17.600Z,1528920917.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:18.000Z,1528920918.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:18.394Z,1528920918.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:18.803Z,1528920918.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:19.180Z,1528920919.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:19.606Z,1528920919.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:19.975Z,1528920919.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:20.386Z,1528920920.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:21.559Z,1528920921.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:21.719Z,1528920921.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:22.117Z,1528920922.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:22.515Z,1528920922.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:22.918Z,1528920922.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:23.316Z,1528920923.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:23.704Z,1528920923.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:24.117Z,1528920924.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:24.517Z,1528920924.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:24.931Z,1528920924.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:25.328Z,1528920925.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:26.473Z,1528920926.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:26.632Z,1528920926.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:27.030Z,1528920927.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:27.435Z,1528920927.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:27.831Z,1528920927.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:28.232Z,1528920928.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:28.657Z,1528920928.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:29.024Z,1528920929.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:29.433Z,1528920929.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:30.591Z,1528920930.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:30.769Z,1528920930.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:31.172Z,1528920931.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:31.579Z,1528920931.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:31.971Z,1528920931.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:32.348Z,1528920932.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:32.749Z,1528920932.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:33.147Z,1528920933.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:33.552Z,1528920933.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:33.976Z,1528920933.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:34.374Z,1528920934.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:35.581Z,1528920935.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:35.735Z,1528920935.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:36.148Z,1528920936.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:36.544Z,1528920936.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:36.951Z,1528920936.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:37.332Z,1528920937.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:37.752Z,1528920937.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:38.127Z,1528920938.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:38.532Z,1528920938.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:38.965Z,1528920938.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:39.358Z,1528920939.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:40.759Z,1528920940.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:40.919Z,1528920940.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:41.328Z,1528920941.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:41.712Z,1528920941.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:42.118Z,1528920942.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:42.506Z,1528920942.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:42.903Z,1528920942.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:43.314Z,1528920943.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:43.728Z,1528920943.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:44.120Z,1528920944.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:45.320Z,1528920945.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:45.476Z,1528920945.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:45.869Z,1528920945.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:46.269Z,1528920946.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:46.669Z,1528920946.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:47.064Z,1528920947.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:47.466Z,1528920947.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:47.880Z,1528920947.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:48.276Z,1528920948.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:49.426Z,1528920949.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:49.584Z,1528920949.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:49.973Z,1528920949.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:50.412Z,1528920950.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:50.772Z,1528920950.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:51.168Z,1528920951.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:51.562Z,1528920951.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:51.984Z,1528920951.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:52.378Z,1528920952.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:53.528Z,1528920953.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:53.688Z,1528920953.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:54.082Z,1528920954.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:54.491Z,1528920954.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:54.881Z,1528920954.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:55.270Z,1528920955.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:55.671Z,1528920955.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:56.068Z,1528920956.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:56.471Z,1528920956.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:56.888Z,1528920956.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:57.220Z,1528920957.220 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:15:57.299Z,1528920957.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:58.443Z,1528920958.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:58.591Z,1528920958.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:59.017Z,1528920959.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:59.419Z,1528920959.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:15:59.811Z,1528920959.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:00.191Z,1528920960.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:00.592Z,1528920960.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:01.018Z,1528920961.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:01.392Z,1528920961.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:01.818Z,1528920961.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:02.971Z,1528920962.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:03.127Z,1528920963.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:03.527Z,1528920963.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:03.915Z,1528920963.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:04.331Z,1528920964.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:04.700Z,1528920964.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:05.095Z,1528920965.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:05.504Z,1528920965.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:05.931Z,1528920965.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:06.326Z,1528920966.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:07.542Z,1528920967.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:07.678Z,1528920967.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:08.085Z,1528920968.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:08.486Z,1528920968.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:08.886Z,1528920968.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:09.270Z,1528920969.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:09.697Z,1528920969.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:10.088Z,1528920970.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:10.488Z,1528920970.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:11.651Z,1528920971.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:11.787Z,1528920971.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:12.198Z,1528920972.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:12.601Z,1528920972.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:13.002Z,1528920973.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:13.393Z,1528920973.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:13.795Z,1528920973.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:14.193Z,1528920974.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:14.594Z,1528920974.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:15.016Z,1528920975.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:15.399Z,1528920975.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:16.589Z,1528920976.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:16.748Z,1528920976.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:17.152Z,1528920977.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:17.554Z,1528920977.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:17.947Z,1528920977.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:18.348Z,1528920978.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:18.729Z,1528920978.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:19.124Z,1528920979.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:19.529Z,1528920979.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:19.959Z,1528920979.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:20.360Z,1528920980.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:21.513Z,1528920981.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:21.675Z,1528920981.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:22.071Z,1528920982.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:22.469Z,1528920982.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:22.868Z,1528920982.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:23.265Z,1528920983.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:23.677Z,1528920983.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:24.044Z,1528920984.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:24.448Z,1528920984.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:24.883Z,1528920984.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:26.022Z,1528920986.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:26.178Z,1528920986.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:26.587Z,1528920986.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:26.980Z,1528920986.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:27.380Z,1528920987.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:27.778Z,1528920987.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:28.181Z,1528920988.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:28.585Z,1528920988.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:28.986Z,1528920988.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:29.389Z,1528920989.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:30.599Z,1528920990.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:30.778Z,1528920990.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:31.183Z,1528920991.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:31.582Z,1528920991.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:31.971Z,1528920991.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:32.355Z,1528920992.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:32.756Z,1528920992.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:33.155Z,1528920993.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:33.553Z,1528920993.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:33.992Z,1528920993.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:34.383Z,1528920994.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:35.589Z,1528920995.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:35.744Z,1528920995.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:36.153Z,1528920996.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:36.550Z,1528920996.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:36.950Z,1528920996.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:37.342Z,1528920997.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:37.741Z,1528920997.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:38.139Z,1528920998.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:38.538Z,1528920998.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:38.965Z,1528920998.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:39.356Z,1528920999.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:40.593Z,1528921000.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:40.744Z,1528921000.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:41.148Z,1528921001.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:41.548Z,1528921001.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:41.947Z,1528921001.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:42.346Z,1528921002.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:42.765Z,1528921002.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:43.141Z,1528921003.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:43.556Z,1528921003.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:44.708Z,1528921004.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:44.859Z,1528921004.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:45.271Z,1528921005.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:45.657Z,1528921005.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:46.058Z,1528921006.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:46.448Z,1528921006.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:46.872Z,1528921006.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:47.443Z,1528921007.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:47.786Z,1528921007.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:48.114Z,1528921008.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:48.588Z,1528921008.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:49.622Z,1528921009.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:49.816Z,1528921009.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:50.208Z,1528921010.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:50.605Z,1528921010.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:51.019Z,1528921011.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:51.448Z,1528921011.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:51.804Z,1528921011.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:52.199Z,1528921012.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:52.604Z,1528921012.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:53.016Z,1528921013.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:53.413Z,1528921013.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:54.575Z,1528921014.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:54.720Z,1528921014.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:55.126Z,1528921015.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:55.526Z,1528921015.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:55.928Z,1528921015.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:56.318Z,1528921016.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:56.732Z,1528921016.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:57.115Z,1528921017.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:57.464Z,1528921017.464 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:16:57.531Z,1528921017.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:58.732Z,1528921018.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:58.888Z,1528921018.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:59.284Z,1528921019.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:16:59.684Z,1528921019.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:00.078Z,1528921020.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:00.465Z,1528921020.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:00.866Z,1528921020.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:01.266Z,1528921021.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:01.664Z,1528921021.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:02.088Z,1528921022.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:02.479Z,1528921022.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:03.720Z,1528921023.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:03.879Z,1528921023.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:04.292Z,1528921024.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:04.688Z,1528921024.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:05.086Z,1528921025.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:05.484Z,1528921025.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:05.880Z,1528921025.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:06.284Z,1528921026.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:06.677Z,1528921026.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:07.100Z,1528921027.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:07.491Z,1528921027.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:08.681Z,1528921028.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:08.840Z,1528921028.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:09.240Z,1528921029.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:09.653Z,1528921029.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:10.044Z,1528921030.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:10.433Z,1528921030.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:10.844Z,1528921030.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:11.221Z,1528921031.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:11.625Z,1528921031.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:12.054Z,1528921032.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:12.427Z,1528921032.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:13.662Z,1528921033.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:13.814Z,1528921033.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:14.203Z,1528921034.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:14.611Z,1528921034.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:15.011Z,1528921035.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:15.398Z,1528921035.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:15.818Z,1528921035.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:16.180Z,1528921036.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:16.620Z,1528921036.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:17.758Z,1528921037.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:17.886Z,1528921037.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:18.314Z,1528921038.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:18.724Z,1528921038.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:19.116Z,1528921039.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:19.509Z,1528921039.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:19.915Z,1528921039.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:20.288Z,1528921040.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:20.709Z,1528921040.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:21.130Z,1528921041.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:21.523Z,1528921041.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:23.746Z,1528921043.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:23.889Z,1528921043.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:24.299Z,1528921044.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:24.726Z,1528921044.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:25.104Z,1528921045.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:25.492Z,1528921045.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:25.890Z,1528921045.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:26.286Z,1528921046.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:26.692Z,1528921046.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:27.127Z,1528921047.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:27.501Z,1528921047.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:28.685Z,1528921048.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:28.843Z,1528921048.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:29.240Z,1528921049.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:29.640Z,1528921049.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:30.041Z,1528921050.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:30.436Z,1528921050.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:30.838Z,1528921050.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:31.239Z,1528921051.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:31.638Z,1528921051.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:32.053Z,1528921052.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:32.442Z,1528921052.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:33.610Z,1528921053.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:33.784Z,1528921053.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:34.185Z,1528921054.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:34.592Z,1528921054.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:34.991Z,1528921054.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:35.382Z,1528921055.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:35.799Z,1528921055.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:36.164Z,1528921056.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:36.606Z,1528921056.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:37.758Z,1528921057.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:37.898Z,1528921057.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:38.306Z,1528921058.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:38.703Z,1528921058.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:39.109Z,1528921059.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:39.495Z,1528921059.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:39.904Z,1528921059.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:40.294Z,1528921060.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:40.697Z,1528921060.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:41.112Z,1528921061.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:41.505Z,1528921061.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:42.714Z,1528921062.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:42.892Z,1528921062.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:43.290Z,1528921063.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:43.703Z,1528921063.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:44.101Z,1528921064.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:44.472Z,1528921064.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:44.895Z,1528921064.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:45.272Z,1528921065.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:45.693Z,1528921065.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:46.105Z,1528921066.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:46.507Z,1528921066.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:47.716Z,1528921067.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:47.859Z,1528921067.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:48.267Z,1528921068.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:48.662Z,1528921068.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:49.054Z,1528921069.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:49.456Z,1528921069.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:49.873Z,1528921069.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:50.251Z,1528921070.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:50.662Z,1528921070.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:51.827Z,1528921071.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:51.978Z,1528921071.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:52.406Z,1528921072.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:52.809Z,1528921072.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:53.208Z,1528921073.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:53.584Z,1528921073.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:54.007Z,1528921074.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:54.401Z,1528921074.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:54.805Z,1528921074.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:55.224Z,1528921075.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:55.615Z,1528921075.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:56.934Z,1528921076.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:57.110Z,1528921077.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:57.487Z,1528921077.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:57.820Z,1528921077.820 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:17:57.892Z,1528921077.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:58.316Z,1528921078.316 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:58.316Z,1528921078.316 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 336
2018-06-13T20:17:58.316Z,1528921078.316 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:17:58.318Z,1528921078.318 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:58.318Z,1528921078.318 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 336
2018-06-13T20:17:58.318Z,1528921078.318 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:17:58.320Z,1528921078.320 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:58.320Z,1528921078.320 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 336
2018-06-13T20:17:58.320Z,1528921078.320 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:17:58.397Z,1528921078.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:17:58.398Z,1528921078.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:17:58.398Z,1528921078.398 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:17:58.765Z,1528921078.765 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:17:58.765Z,1528921078.765 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 336
2018-06-13T20:17:58.766Z,1528921078.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:17:58.766Z,1528921078.766 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 336
2018-06-13T20:17:58.766Z,1528921078.766 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:17:58.766Z,1528921078.766 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 336
2018-06-13T20:17:59.086Z,1528921079.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:17:59.087Z,1528921079.087 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:17:59.087Z,1528921079.087 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:17:59.088Z,1528921079.088 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:17:59.093Z,1528921079.093 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:17:59.093Z,1528921079.093 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:17:59.094Z,1528921079.094 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:17:59.094Z,1528921079.094 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:17:59.094Z,1528921079.094 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:17:59.468Z,1528921079.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T20:17:59.489Z,1528921079.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:17:59.900Z,1528921079.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T20:17:59.902Z,1528921079.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:00.298Z,1528921080.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T20:18:00.300Z,1528921080.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:01.449Z,1528921081.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2018-06-13T20:18:01.450Z,1528921081.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:01.571Z,1528921081.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T20:18:01.572Z,1528921081.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:01.000Z,1528921082.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T20:18:02.001Z,1528921082.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:02.399Z,1528921082.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T20:18:02.400Z,1528921082.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:02.800Z,1528921082.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T20:18:02.801Z,1528921082.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:03.176Z,1528921083.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T20:18:03.201Z,1528921083.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:03.577Z,1528921083.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T20:18:03.578Z,1528921083.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:04.008Z,1528921084.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T20:18:04.009Z,1528921084.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:04.404Z,1528921084.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T20:18:04.405Z,1528921084.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:05.547Z,1528921085.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T20:18:05.548Z,1528921085.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:05.720Z,1528921085.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T20:18:05.721Z,1528921085.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:06.128Z,1528921086.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T20:18:06.128Z,1528921086.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:06.519Z,1528921086.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T20:18:06.520Z,1528921086.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:06.920Z,1528921086.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T20:18:06.921Z,1528921086.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:07.316Z,1528921087.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T20:18:07.317Z,1528921087.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:07.697Z,1528921087.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T20:18:07.698Z,1528921087.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:08.133Z,1528921088.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T20:18:08.134Z,1528921088.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:08.536Z,1528921088.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T20:18:08.537Z,1528921088.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:09.677Z,1528921089.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T20:18:09.678Z,1528921089.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:09.832Z,1528921089.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T20:18:09.834Z,1528921089.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:10.170Z,1528921090.170 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T20:18:10.170Z,1528921090.170 [NAL9602] Data Fault, FailCount= 2
2018-06-13T20:18:10.170Z,1528921090.170 [NAL9602](ERROR): Data Fault
2018-06-13T20:18:10.234Z,1528921090.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T20:18:10.235Z,1528921090.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:10.321Z,1528921090.321 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T20:18:10.570Z,1528921090.570 [NAL9602](INFO): Powering down
2018-06-13T20:18:10.628Z,1528921090.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T20:18:10.633Z,1528921090.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:11.012Z,1528921091.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-06-13T20:18:11.013Z,1528921091.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:11.406Z,1528921091.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-06-13T20:18:11.407Z,1528921091.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:11.486Z,1528921091.486 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T20:18:11.486Z,1528921091.486 [NAL9602] No Fault, FailCount= 2
2018-06-13T20:18:11.806Z,1528921091.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-06-13T20:18:11.807Z,1528921091.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:12.211Z,1528921092.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T20:18:12.212Z,1528921092.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:12.606Z,1528921092.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-06-13T20:18:12.607Z,1528921092.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:13.006Z,1528921093.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T20:18:13.007Z,1528921093.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:13.412Z,1528921093.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-06-13T20:18:13.413Z,1528921093.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:13.806Z,1528921093.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T20:18:13.806Z,1528921093.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:14.206Z,1528921094.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T20:18:14.207Z,1528921094.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:14.612Z,1528921094.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-06-13T20:18:14.614Z,1528921094.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:15.006Z,1528921095.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-06-13T20:18:15.007Z,1528921095.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:15.407Z,1528921095.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T20:18:15.408Z,1528921095.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:15.810Z,1528921095.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T20:18:15.811Z,1528921095.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:16.206Z,1528921096.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T20:18:16.207Z,1528921096.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:16.606Z,1528921096.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T20:18:16.607Z,1528921096.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:17.008Z,1528921097.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T20:18:17.009Z,1528921097.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:17.418Z,1528921097.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T20:18:17.419Z,1528921097.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:17.808Z,1528921097.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T20:18:17.809Z,1528921097.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:18.220Z,1528921098.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T20:18:18.221Z,1528921098.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:18.616Z,1528921098.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:19.008Z,1528921099.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:19.417Z,1528921099.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:19.816Z,1528921099.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:20.213Z,1528921100.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:20.612Z,1528921100.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:21.019Z,1528921101.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:21.412Z,1528921101.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:21.812Z,1528921101.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:22.227Z,1528921102.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:22.612Z,1528921102.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:23.012Z,1528921103.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:23.416Z,1528921103.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:23.812Z,1528921103.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:24.220Z,1528921104.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:24.618Z,1528921104.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:25.016Z,1528921105.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:25.416Z,1528921105.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:25.818Z,1528921105.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:26.213Z,1528921106.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:26.616Z,1528921106.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:27.016Z,1528921107.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:27.413Z,1528921107.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:27.814Z,1528921107.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:28.214Z,1528921108.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:28.620Z,1528921108.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:29.020Z,1528921109.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:29.414Z,1528921109.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:29.820Z,1528921109.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:30.220Z,1528921110.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:30.614Z,1528921110.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:31.013Z,1528921111.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:31.412Z,1528921111.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:31.878Z,1528921111.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:32.258Z,1528921112.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:32.642Z,1528921112.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:33.081Z,1528921113.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:33.462Z,1528921113.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:33.814Z,1528921113.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:34.225Z,1528921114.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:34.608Z,1528921114.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:35.007Z,1528921115.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:35.424Z,1528921115.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:35.809Z,1528921115.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:36.208Z,1528921116.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:36.608Z,1528921116.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:37.008Z,1528921117.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:37.408Z,1528921117.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:37.808Z,1528921117.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:38.209Z,1528921118.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:38.610Z,1528921118.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:39.009Z,1528921119.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:39.408Z,1528921119.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:39.812Z,1528921119.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:40.209Z,1528921120.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:40.574Z,1528921120.574 [NAL9602](INFO): Powering up NAL9602
2018-06-13T20:18:40.611Z,1528921120.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:41.012Z,1528921121.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:41.409Z,1528921121.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:41.816Z,1528921121.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:42.239Z,1528921122.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:42.610Z,1528921122.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:43.017Z,1528921123.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:43.420Z,1528921123.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:43.823Z,1528921123.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:44.216Z,1528921124.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:44.613Z,1528921124.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:45.010Z,1528921125.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:45.411Z,1528921125.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:45.813Z,1528921125.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:46.211Z,1528921126.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:46.607Z,1528921126.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:47.009Z,1528921127.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:47.410Z,1528921127.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:47.807Z,1528921127.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:48.245Z,1528921128.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:48.610Z,1528921128.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:49.006Z,1528921129.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:49.412Z,1528921129.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:49.820Z,1528921129.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:50.212Z,1528921130.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:50.611Z,1528921130.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:51.010Z,1528921131.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:51.416Z,1528921131.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:51.775Z,1528921131.775 [NAL9602](INFO): NAL9602 initialized
2018-06-13T20:18:51.819Z,1528921131.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:52.219Z,1528921132.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:52.617Z,1528921132.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:53.020Z,1528921133.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:53.415Z,1528921133.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:53.808Z,1528921133.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:54.214Z,1528921134.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:54.614Z,1528921134.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:55.039Z,1528921135.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:55.424Z,1528921135.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:56.595Z,1528921136.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:56.758Z,1528921136.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:57.170Z,1528921137.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:57.559Z,1528921137.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:57.892Z,1528921137.892 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:18:57.960Z,1528921137.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:58.331Z,1528921138.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:58.736Z,1528921138.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:59.167Z,1528921139.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:59.534Z,1528921139.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:18:59.967Z,1528921139.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:01.095Z,1528921141.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:01.265Z,1528921141.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:01.663Z,1528921141.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:02.072Z,1528921142.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:02.466Z,1528921142.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:02.859Z,1528921142.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:03.240Z,1528921143.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:03.644Z,1528921143.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:04.081Z,1528921144.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:04.470Z,1528921144.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:05.679Z,1528921145.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:05.839Z,1528921145.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:06.234Z,1528921146.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:06.656Z,1528921146.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:07.103Z,1528921147.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:07.482Z,1528921147.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:07.827Z,1528921147.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:08.241Z,1528921148.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:08.634Z,1528921148.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:09.824Z,1528921149.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:09.990Z,1528921149.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:10.383Z,1528921150.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:10.780Z,1528921150.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:11.183Z,1528921151.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:11.584Z,1528921151.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:11.979Z,1528921151.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:12.356Z,1528921152.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:12.777Z,1528921152.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:13.195Z,1528921153.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:13.586Z,1528921153.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:14.751Z,1528921154.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:14.866Z,1528921154.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:15.294Z,1528921155.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:15.697Z,1528921155.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:16.107Z,1528921156.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:16.480Z,1528921156.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:16.915Z,1528921156.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:17.275Z,1528921157.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:17.688Z,1528921157.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:18.866Z,1528921158.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:19.030Z,1528921159.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:19.423Z,1528921159.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:19.823Z,1528921159.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:20.225Z,1528921160.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:20.627Z,1528921160.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:21.018Z,1528921161.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:21.425Z,1528921161.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:21.811Z,1528921161.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:22.237Z,1528921162.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:22.627Z,1528921162.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:23.803Z,1528921163.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:23.984Z,1528921163.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:24.374Z,1528921164.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:24.778Z,1528921164.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:25.178Z,1528921165.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:25.573Z,1528921165.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:25.976Z,1528921165.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:26.352Z,1528921166.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:26.758Z,1528921166.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:27.182Z,1528921167.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:27.566Z,1528921167.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:28.749Z,1528921168.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:28.910Z,1528921168.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:29.313Z,1528921169.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:29.720Z,1528921169.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:30.120Z,1528921170.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:30.505Z,1528921170.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:30.919Z,1528921170.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:31.304Z,1528921171.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:31.715Z,1528921171.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:32.898Z,1528921172.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:33.056Z,1528921173.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:33.448Z,1528921173.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:33.856Z,1528921173.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:34.251Z,1528921174.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:34.640Z,1528921174.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:35.053Z,1528921175.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:35.428Z,1528921175.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:35.850Z,1528921175.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:36.272Z,1528921176.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:36.654Z,1528921176.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:37.823Z,1528921177.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:37.972Z,1528921177.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:38.375Z,1528921178.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:38.780Z,1528921178.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:39.174Z,1528921179.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:39.561Z,1528921179.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:39.980Z,1528921179.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:40.367Z,1528921180.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:40.773Z,1528921180.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:42.673Z,1528921182.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:42.820Z,1528921182.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:43.215Z,1528921183.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:43.616Z,1528921183.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:44.024Z,1528921184.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:44.415Z,1528921184.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:44.815Z,1528921184.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:45.230Z,1528921185.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:45.619Z,1528921185.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:46.943Z,1528921186.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:47.123Z,1528921187.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:47.519Z,1528921187.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:47.921Z,1528921187.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:48.318Z,1528921188.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:48.723Z,1528921188.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:49.119Z,1528921189.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:49.502Z,1528921189.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:49.917Z,1528921189.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:50.329Z,1528921190.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:50.721Z,1528921190.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:51.915Z,1528921191.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:52.078Z,1528921192.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:52.470Z,1528921192.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:52.877Z,1528921192.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:53.275Z,1528921193.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:53.668Z,1528921193.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:54.070Z,1528921194.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:54.444Z,1528921194.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:54.873Z,1528921194.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:55.278Z,1528921195.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:55.683Z,1528921195.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:57.020Z,1528921197.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:57.176Z,1528921197.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:57.573Z,1528921197.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:57.974Z,1528921197.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:58.308Z,1528921198.308 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:19:58.378Z,1528921198.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:58.748Z,1528921198.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:59.152Z,1528921199.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:59.573Z,1528921199.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:19:59.988Z,1528921199.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:00.376Z,1528921200.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:01.543Z,1528921201.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:01.700Z,1528921201.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:02.091Z,1528921202.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:02.490Z,1528921202.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:02.893Z,1528921202.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:03.300Z,1528921203.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:03.685Z,1528921203.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:04.099Z,1528921204.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:04.501Z,1528921204.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:05.647Z,1528921205.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:05.800Z,1528921205.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:06.201Z,1528921206.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:06.625Z,1528921206.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:07.004Z,1528921207.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:07.396Z,1528921207.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:07.788Z,1528921207.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:08.226Z,1528921208.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:08.605Z,1528921208.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:09.775Z,1528921209.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:09.935Z,1528921209.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:10.333Z,1528921210.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:10.740Z,1528921210.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:11.134Z,1528921211.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:11.522Z,1528921211.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:11.910Z,1528921211.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:12.346Z,1528921212.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:12.712Z,1528921212.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:13.131Z,1528921213.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:14.308Z,1528921214.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:14.451Z,1528921214.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:14.856Z,1528921214.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:15.260Z,1528921215.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:15.656Z,1528921215.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:16.048Z,1528921216.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:16.456Z,1528921216.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:16.853Z,1528921216.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:17.268Z,1528921217.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:17.661Z,1528921217.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:18.850Z,1528921218.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:19.006Z,1528921219.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:19.405Z,1528921219.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:19.804Z,1528921219.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:20.204Z,1528921220.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:20.593Z,1528921220.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:21.015Z,1528921221.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:21.388Z,1528921221.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:21.814Z,1528921221.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:22.959Z,1528921222.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:23.108Z,1528921223.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:23.516Z,1528921223.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:23.912Z,1528921223.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:24.314Z,1528921224.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:24.716Z,1528921224.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:25.089Z,1528921225.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:25.488Z,1528921225.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:25.889Z,1528921225.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:26.322Z,1528921226.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:26.711Z,1528921226.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:27.873Z,1528921227.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:28.023Z,1528921228.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:28.419Z,1528921228.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:28.822Z,1528921228.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:29.227Z,1528921229.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:29.618Z,1528921229.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:30.025Z,1528921230.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:30.417Z,1528921230.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:30.820Z,1528921230.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:31.232Z,1528921231.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:32.373Z,1528921232.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:32.532Z,1528921232.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:32.924Z,1528921232.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:33.329Z,1528921233.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:33.744Z,1528921233.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:34.117Z,1528921234.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:34.499Z,1528921234.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:34.921Z,1528921234.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:35.336Z,1528921235.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:35.730Z,1528921235.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:36.929Z,1528921236.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:37.085Z,1528921237.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:37.487Z,1528921237.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:37.890Z,1528921237.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:38.288Z,1528921238.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:38.686Z,1528921238.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:39.084Z,1528921239.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:39.468Z,1528921239.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:39.866Z,1528921239.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:40.301Z,1528921240.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:40.691Z,1528921240.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:41.906Z,1528921241.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:42.048Z,1528921242.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:42.450Z,1528921242.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:42.852Z,1528921242.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:43.254Z,1528921243.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:43.641Z,1528921243.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:44.064Z,1528921244.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:44.448Z,1528921244.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:44.852Z,1528921244.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:46.042Z,1528921246.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:46.186Z,1528921246.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:46.603Z,1528921246.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:47.016Z,1528921247.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:47.403Z,1528921247.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:47.798Z,1528921247.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:48.206Z,1528921248.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:48.595Z,1528921248.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:49.003Z,1528921249.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:49.414Z,1528921249.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:49.807Z,1528921249.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:50.973Z,1528921250.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:51.148Z,1528921251.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:51.544Z,1528921251.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:51.952Z,1528921251.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:52.356Z,1528921252.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:52.740Z,1528921252.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:53.129Z,1528921253.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:53.528Z,1528921253.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:53.932Z,1528921253.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:54.374Z,1528921254.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:54.753Z,1528921254.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:55.927Z,1528921255.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:56.108Z,1528921256.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:56.506Z,1528921256.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:56.916Z,1528921256.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:57.308Z,1528921257.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:57.708Z,1528921257.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:58.044Z,1528921258.044 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:20:58.109Z,1528921258.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:58.480Z,1528921258.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:58.888Z,1528921258.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:59.316Z,1528921259.316 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:59.316Z,1528921259.316 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 337
2018-06-13T20:20:59.316Z,1528921259.316 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:20:59.318Z,1528921259.318 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:59.318Z,1528921259.318 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 337
2018-06-13T20:20:59.318Z,1528921259.318 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:20:59.320Z,1528921259.320 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:20:59.320Z,1528921259.320 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 337
2018-06-13T20:20:59.320Z,1528921259.320 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:20:59.398Z,1528921259.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:20:59.398Z,1528921259.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:20:59.398Z,1528921259.398 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:20:59.785Z,1528921259.785 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:20:59.785Z,1528921259.785 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 337
2018-06-13T20:20:59.786Z,1528921259.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:20:59.786Z,1528921259.786 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 337
2018-06-13T20:20:59.786Z,1528921259.786 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:20:59.786Z,1528921259.786 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 337
2018-06-13T20:21:00.920Z,1528921260.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:21:00.920Z,1528921260.920 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:21:00.920Z,1528921260.920 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:21:00.921Z,1528921260.921 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:21:00.921Z,1528921260.921 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:21:00.922Z,1528921260.922 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:21:00.922Z,1528921260.922 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:21:00.922Z,1528921260.922 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:21:00.923Z,1528921260.923 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:21:01.080Z,1528921261.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T20:21:01.086Z,1528921261.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:01.486Z,1528921261.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T20:21:01.487Z,1528921261.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:01.887Z,1528921261.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T20:21:01.888Z,1528921261.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:02.286Z,1528921262.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T20:21:02.287Z,1528921262.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:02.668Z,1528921262.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T20:21:02.685Z,1528921262.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:03.097Z,1528921263.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T20:21:03.098Z,1528921263.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:03.461Z,1528921263.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T20:21:03.462Z,1528921263.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:03.892Z,1528921263.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T20:21:03.893Z,1528921263.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:05.060Z,1528921265.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T20:21:05.061Z,1528921265.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:05.211Z,1528921265.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T20:21:05.212Z,1528921265.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:05.604Z,1528921265.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T20:21:05.605Z,1528921265.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:05.000Z,1528921266.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T20:21:06.001Z,1528921266.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:06.399Z,1528921266.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T20:21:06.399Z,1528921266.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:06.793Z,1528921266.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T20:21:06.794Z,1528921266.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:07.200Z,1528921267.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T20:21:07.200Z,1528921267.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:07.584Z,1528921267.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T20:21:07.589Z,1528921267.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:07.997Z,1528921267.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T20:21:07.998Z,1528921267.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:08.408Z,1528921268.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T20:21:08.409Z,1528921268.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:08.812Z,1528921268.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T20:21:08.813Z,1528921268.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:09.995Z,1528921269.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T20:21:09.996Z,1528921269.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:10.160Z,1528921270.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T20:21:10.162Z,1528921270.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:10.555Z,1528921270.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T20:21:10.556Z,1528921270.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:10.970Z,1528921270.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T20:21:10.971Z,1528921270.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:11.352Z,1528921271.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T20:21:11.354Z,1528921271.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:11.744Z,1528921271.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T20:21:11.746Z,1528921271.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:12.132Z,1528921272.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T20:21:12.132Z,1528921272.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:12.532Z,1528921272.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T20:21:12.533Z,1528921272.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:12.937Z,1528921272.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T20:21:12.938Z,1528921272.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:13.376Z,1528921273.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T20:21:13.378Z,1528921273.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:13.758Z,1528921273.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T20:21:13.759Z,1528921273.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:14.924Z,1528921274.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T20:21:14.925Z,1528921274.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:15.077Z,1528921275.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T20:21:15.078Z,1528921275.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:15.490Z,1528921275.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T20:21:15.490Z,1528921275.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:15.888Z,1528921275.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T20:21:15.889Z,1528921275.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:16.285Z,1528921276.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T20:21:16.286Z,1528921276.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:16.676Z,1528921276.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T20:21:16.677Z,1528921276.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:17.095Z,1528921277.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T20:21:17.096Z,1528921277.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:17.474Z,1528921277.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T20:21:17.475Z,1528921277.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:17.889Z,1528921277.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T20:21:17.890Z,1528921277.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:19.047Z,1528921279.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T20:21:19.048Z,1528921279.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:19.228Z,1528921279.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T20:21:19.229Z,1528921279.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:19.622Z,1528921279.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:20.030Z,1528921280.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:20.431Z,1528921280.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:20.822Z,1528921280.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:21.224Z,1528921281.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:21.616Z,1528921281.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:22.029Z,1528921282.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:22.437Z,1528921282.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:22.828Z,1528921282.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:24.038Z,1528921284.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:24.174Z,1528921284.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:24.591Z,1528921284.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:24.982Z,1528921284.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:25.387Z,1528921285.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:25.780Z,1528921285.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:26.160Z,1528921286.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:26.592Z,1528921286.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:26.998Z,1528921286.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:27.406Z,1528921287.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:27.772Z,1528921287.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:29.253Z,1528921289.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:29.422Z,1528921289.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:29.807Z,1528921289.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:30.210Z,1528921290.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:30.617Z,1528921290.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:31.012Z,1528921291.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:31.401Z,1528921291.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:31.805Z,1528921291.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:32.226Z,1528921292.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:32.620Z,1528921292.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:33.814Z,1528921293.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:33.966Z,1528921293.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:34.366Z,1528921294.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:34.770Z,1528921294.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:35.166Z,1528921295.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:35.568Z,1528921295.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:35.954Z,1528921295.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:36.376Z,1528921296.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:36.770Z,1528921296.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:37.920Z,1528921297.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:38.075Z,1528921298.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:38.475Z,1528921298.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:38.876Z,1528921298.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:39.269Z,1528921299.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:39.668Z,1528921299.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:40.066Z,1528921300.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:40.512Z,1528921300.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:40.890Z,1528921300.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:42.035Z,1528921302.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:42.188Z,1528921302.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:42.577Z,1528921302.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:42.982Z,1528921302.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:43.380Z,1528921303.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:43.770Z,1528921303.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:44.169Z,1528921304.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:44.572Z,1528921304.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:44.971Z,1528921304.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:45.388Z,1528921305.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:45.783Z,1528921305.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:46.946Z,1528921306.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:47.095Z,1528921307.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:47.528Z,1528921307.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:47.926Z,1528921307.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:48.324Z,1528921308.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:48.725Z,1528921308.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:49.130Z,1528921309.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:49.496Z,1528921309.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:49.932Z,1528921309.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:51.092Z,1528921311.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:51.230Z,1528921311.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:51.637Z,1528921311.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:52.039Z,1528921312.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:52.440Z,1528921312.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:52.836Z,1528921312.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:53.239Z,1528921313.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:53.630Z,1528921313.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:54.029Z,1528921314.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:54.443Z,1528921314.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:54.843Z,1528921314.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:56.032Z,1528921316.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:56.187Z,1528921316.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:56.583Z,1528921316.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:56.984Z,1528921316.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:57.383Z,1528921317.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:57.782Z,1528921317.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:58.124Z,1528921318.124 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:21:58.229Z,1528921318.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:58.563Z,1528921318.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:21:58.995Z,1528921318.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:00.142Z,1528921320.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:00.303Z,1528921320.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:00.698Z,1528921320.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:01.104Z,1528921321.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:01.508Z,1528921321.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:01.900Z,1528921321.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:02.303Z,1528921322.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:02.701Z,1528921322.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:03.099Z,1528921323.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:03.511Z,1528921323.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:03.910Z,1528921323.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:05.110Z,1528921325.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:05.259Z,1528921325.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:05.651Z,1528921325.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:06.053Z,1528921326.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:06.464Z,1528921326.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:06.840Z,1528921326.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:07.249Z,1528921327.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:07.632Z,1528921327.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:08.048Z,1528921328.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:08.468Z,1528921328.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:08.861Z,1528921328.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:10.068Z,1528921330.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:10.225Z,1528921330.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:10.618Z,1528921330.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:11.021Z,1528921331.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:11.417Z,1528921331.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:11.815Z,1528921331.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:12.212Z,1528921332.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:12.592Z,1528921332.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:13.014Z,1528921333.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:13.426Z,1528921333.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:13.827Z,1528921333.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:15.037Z,1528921335.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:15.166Z,1528921335.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:15.578Z,1528921335.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:15.982Z,1528921335.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:16.382Z,1528921336.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:16.780Z,1528921336.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:17.189Z,1528921337.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:17.565Z,1528921337.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:17.981Z,1528921337.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:19.144Z,1528921339.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:19.295Z,1528921339.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:19.686Z,1528921339.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:20.091Z,1528921340.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:20.485Z,1528921340.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:20.889Z,1528921340.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:21.264Z,1528921341.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:21.664Z,1528921341.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:22.086Z,1528921342.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:22.499Z,1528921342.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:22.886Z,1528921342.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:24.066Z,1528921344.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:24.204Z,1528921344.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:24.612Z,1528921344.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:25.010Z,1528921345.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:25.406Z,1528921345.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:25.796Z,1528921345.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:26.224Z,1528921346.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:26.610Z,1528921346.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:27.016Z,1528921347.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:28.208Z,1528921348.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:28.358Z,1528921348.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:28.764Z,1528921348.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:29.168Z,1528921349.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:29.571Z,1528921349.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:29.945Z,1528921349.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:30.345Z,1528921350.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:30.746Z,1528921350.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:31.148Z,1528921351.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:31.581Z,1528921351.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:31.971Z,1528921351.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:33.186Z,1528921353.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:33.331Z,1528921353.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:33.736Z,1528921353.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:34.129Z,1528921354.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:34.526Z,1528921354.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:34.922Z,1528921354.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:35.327Z,1528921355.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:35.717Z,1528921355.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:36.126Z,1528921356.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:36.537Z,1528921356.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:36.919Z,1528921356.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:38.242Z,1528921358.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:38.396Z,1528921358.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:38.798Z,1528921358.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:39.202Z,1528921359.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:39.600Z,1528921359.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:39.993Z,1528921359.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:40.380Z,1528921360.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:40.781Z,1528921360.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:41.207Z,1528921361.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:41.606Z,1528921361.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:42.813Z,1528921362.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:42.960Z,1528921362.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:43.364Z,1528921363.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:43.763Z,1528921363.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:44.159Z,1528921364.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:44.552Z,1528921364.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:44.953Z,1528921364.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:45.369Z,1528921365.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:45.777Z,1528921365.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:46.925Z,1528921366.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:47.075Z,1528921367.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:47.473Z,1528921367.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:47.870Z,1528921367.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:48.272Z,1528921368.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:48.648Z,1528921368.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:49.046Z,1528921369.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:49.485Z,1528921369.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:49.880Z,1528921369.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:51.022Z,1528921371.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:51.176Z,1528921371.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:51.586Z,1528921371.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:51.987Z,1528921371.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:52.384Z,1528921372.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:52.780Z,1528921372.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:53.183Z,1528921373.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:53.590Z,1528921373.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:53.977Z,1528921373.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:54.384Z,1528921374.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:55.555Z,1528921375.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:55.704Z,1528921375.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:56.135Z,1528921376.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:56.532Z,1528921376.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:56.935Z,1528921376.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:57.312Z,1528921377.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:57.708Z,1528921377.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:58.104Z,1528921378.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:58.464Z,1528921378.464 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:22:58.544Z,1528921378.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:22:58.939Z,1528921378.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:00.132Z,1528921380.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:00.292Z,1528921380.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:00.690Z,1528921380.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:01.088Z,1528921381.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:01.488Z,1528921381.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:01.892Z,1528921381.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:02.285Z,1528921382.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:02.690Z,1528921382.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:03.094Z,1528921383.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:03.501Z,1528921383.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:03.892Z,1528921383.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:05.112Z,1528921385.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:05.296Z,1528921385.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:05.704Z,1528921385.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:06.108Z,1528921386.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:06.506Z,1528921386.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:06.900Z,1528921386.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:07.280Z,1528921387.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:07.680Z,1528921387.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:08.084Z,1528921388.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:08.508Z,1528921388.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:08.906Z,1528921388.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:10.109Z,1528921390.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:10.267Z,1528921390.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:10.661Z,1528921390.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:11.066Z,1528921391.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:11.463Z,1528921391.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:11.858Z,1528921391.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:12.278Z,1528921392.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:12.653Z,1528921392.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:13.069Z,1528921393.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:14.222Z,1528921394.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:14.371Z,1528921394.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:14.778Z,1528921394.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:15.177Z,1528921395.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:15.574Z,1528921395.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:15.972Z,1528921395.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:16.348Z,1528921396.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:16.752Z,1528921396.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:17.152Z,1528921397.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:17.588Z,1528921397.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:17.975Z,1528921397.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:19.142Z,1528921399.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:19.258Z,1528921399.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:19.682Z,1528921399.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:20.088Z,1528921400.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:20.487Z,1528921400.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:20.881Z,1528921400.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:21.293Z,1528921401.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:21.670Z,1528921401.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:22.093Z,1528921402.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:23.257Z,1528921403.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:23.404Z,1528921403.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:23.805Z,1528921403.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:24.205Z,1528921404.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:24.602Z,1528921404.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:24.992Z,1528921404.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:25.394Z,1528921405.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:25.793Z,1528921405.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:26.192Z,1528921406.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:26.616Z,1528921406.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:27.006Z,1528921407.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:28.457Z,1528921408.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:28.604Z,1528921408.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:29.001Z,1528921409.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:29.406Z,1528921409.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:29.802Z,1528921409.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:30.199Z,1528921410.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:30.603Z,1528921410.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:30.995Z,1528921410.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:31.417Z,1528921411.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:31.802Z,1528921411.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:32.994Z,1528921412.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:33.155Z,1528921413.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:33.544Z,1528921413.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:33.948Z,1528921413.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:34.352Z,1528921414.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:34.746Z,1528921414.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:35.121Z,1528921415.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:35.557Z,1528921415.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:35.951Z,1528921415.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:37.108Z,1528921417.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:37.254Z,1528921417.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:37.658Z,1528921417.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:38.063Z,1528921418.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:38.457Z,1528921418.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:38.848Z,1528921418.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:39.251Z,1528921419.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:39.668Z,1528921419.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:40.064Z,1528921420.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:41.219Z,1528921421.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:41.370Z,1528921421.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:41.780Z,1528921421.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:42.174Z,1528921422.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:42.573Z,1528921422.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:42.978Z,1528921422.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:43.370Z,1528921423.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:43.770Z,1528921423.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:44.180Z,1528921424.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:44.603Z,1528921424.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:44.979Z,1528921424.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:46.152Z,1528921426.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:46.312Z,1528921426.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:46.707Z,1528921426.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:47.108Z,1528921427.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:47.510Z,1528921427.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:47.908Z,1528921427.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:48.314Z,1528921428.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:48.704Z,1528921428.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:49.116Z,1528921429.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:50.274Z,1528921430.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:50.425Z,1528921430.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:50.816Z,1528921430.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:51.217Z,1528921431.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:51.616Z,1528921431.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:52.014Z,1528921432.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:52.416Z,1528921432.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:52.804Z,1528921432.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:53.217Z,1528921433.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:53.635Z,1528921433.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:54.024Z,1528921434.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:55.186Z,1528921435.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:55.322Z,1528921435.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:55.732Z,1528921435.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:56.138Z,1528921436.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:56.540Z,1528921436.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:56.932Z,1528921436.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:57.344Z,1528921437.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:57.725Z,1528921437.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:58.144Z,1528921438.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:59.298Z,1528921439.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:59.410Z,1528921439.410 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:23:59.479Z,1528921439.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:23:59.871Z,1528921439.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:00.273Z,1528921440.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:00.680Z,1528921440.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:01.074Z,1528921441.074 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:01.074Z,1528921441.074 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 338
2018-06-13T20:24:01.074Z,1528921441.074 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:24:01.076Z,1528921441.076 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:01.076Z,1528921441.076 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 338
2018-06-13T20:24:01.076Z,1528921441.076 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:24:01.078Z,1528921441.078 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:01.078Z,1528921441.078 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 338
2018-06-13T20:24:01.078Z,1528921441.078 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:24:01.157Z,1528921441.157 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:24:01.157Z,1528921441.157 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:24:01.158Z,1528921441.158 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:24:01.541Z,1528921441.541 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:24:01.541Z,1528921441.541 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 338
2018-06-13T20:24:01.542Z,1528921441.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:24:01.542Z,1528921441.542 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 338
2018-06-13T20:24:01.542Z,1528921441.542 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:24:01.542Z,1528921441.542 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 338
2018-06-13T20:24:01.864Z,1528921441.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:24:01.864Z,1528921441.864 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:24:01.869Z,1528921441.869 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:24:01.869Z,1528921441.869 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:24:01.870Z,1528921441.870 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:24:01.870Z,1528921441.870 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:24:01.870Z,1528921441.870 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:24:01.871Z,1528921441.871 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:24:01.871Z,1528921441.871 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:24:02.261Z,1528921442.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T20:24:02.262Z,1528921442.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:02.679Z,1528921442.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T20:24:02.680Z,1528921442.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:03.070Z,1528921443.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T20:24:03.071Z,1528921443.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:04.261Z,1528921444.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T20:24:04.262Z,1528921444.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:04.412Z,1528921444.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T20:24:04.412Z,1528921444.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:04.816Z,1528921444.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T20:24:04.817Z,1528921444.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:05.216Z,1528921445.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T20:24:05.217Z,1528921445.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:05.623Z,1528921445.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T20:24:05.623Z,1528921445.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:06.013Z,1528921446.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T20:24:06.014Z,1528921446.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:06.413Z,1528921446.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T20:24:06.414Z,1528921446.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:06.793Z,1528921446.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T20:24:06.794Z,1528921446.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:07.198Z,1528921447.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T20:24:07.199Z,1528921447.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:07.634Z,1528921447.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T20:24:07.635Z,1528921447.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:08.032Z,1528921448.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T20:24:08.033Z,1528921448.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:09.235Z,1528921449.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T20:24:09.235Z,1528921449.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:09.377Z,1528921449.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T20:24:09.378Z,1528921449.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:09.783Z,1528921449.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T20:24:09.784Z,1528921449.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:10.184Z,1528921450.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T20:24:10.185Z,1528921450.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:10.586Z,1528921450.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T20:24:10.587Z,1528921450.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:10.972Z,1528921450.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T20:24:10.973Z,1528921450.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:11.395Z,1528921451.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T20:24:11.396Z,1528921451.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:11.774Z,1528921451.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T20:24:11.775Z,1528921451.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:12.184Z,1528921452.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T20:24:12.185Z,1528921452.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:13.350Z,1528921453.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T20:24:13.351Z,1528921453.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:13.530Z,1528921453.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T20:24:13.531Z,1528921453.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:13.922Z,1528921453.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T20:24:13.923Z,1528921453.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:14.335Z,1528921454.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T20:24:14.336Z,1528921454.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:14.731Z,1528921454.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T20:24:14.732Z,1528921454.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:15.124Z,1528921455.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T20:24:15.129Z,1528921455.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:15.528Z,1528921455.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T20:24:15.533Z,1528921455.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:15.908Z,1528921455.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T20:24:15.909Z,1528921455.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:16.312Z,1528921456.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T20:24:16.314Z,1528921456.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:16.738Z,1528921456.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T20:24:16.739Z,1528921456.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:17.134Z,1528921457.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T20:24:17.135Z,1528921457.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:18.292Z,1528921458.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T20:24:18.293Z,1528921458.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:18.451Z,1528921458.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T20:24:18.452Z,1528921458.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:18.843Z,1528921458.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T20:24:18.844Z,1528921458.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:19.239Z,1528921459.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T20:24:19.240Z,1528921459.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:19.636Z,1528921459.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T20:24:19.637Z,1528921459.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:20.032Z,1528921460.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T20:24:20.037Z,1528921460.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:20.434Z,1528921460.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T20:24:20.434Z,1528921460.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:20.828Z,1528921460.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T20:24:20.830Z,1528921460.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:21.236Z,1528921461.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:21.699Z,1528921461.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:22.156Z,1528921462.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:23.932Z,1528921463.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:24.091Z,1528921464.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:24.531Z,1528921464.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:24.900Z,1528921464.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:25.288Z,1528921465.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:25.681Z,1528921465.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:26.065Z,1528921466.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:26.503Z,1528921466.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:26.903Z,1528921466.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:28.056Z,1528921468.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:28.172Z,1528921468.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:28.605Z,1528921468.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:29.013Z,1528921469.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:29.402Z,1528921469.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:29.780Z,1528921469.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:30.182Z,1528921470.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:30.613Z,1528921470.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:31.007Z,1528921471.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:32.214Z,1528921472.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:32.371Z,1528921472.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:32.766Z,1528921472.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:33.166Z,1528921473.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:33.566Z,1528921473.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:33.956Z,1528921473.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:34.361Z,1528921474.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:34.782Z,1528921474.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:35.176Z,1528921475.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:36.334Z,1528921476.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:36.480Z,1528921476.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:36.877Z,1528921476.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:37.277Z,1528921477.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:37.677Z,1528921477.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:38.072Z,1528921478.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:38.471Z,1528921478.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:38.877Z,1528921478.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:39.278Z,1528921479.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:39.686Z,1528921479.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:40.084Z,1528921480.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:41.244Z,1528921481.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:41.383Z,1528921481.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:41.792Z,1528921481.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:42.190Z,1528921482.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:42.595Z,1528921482.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:42.989Z,1528921482.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:43.393Z,1528921483.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:43.785Z,1528921483.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:44.196Z,1528921484.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:45.350Z,1528921485.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:45.503Z,1528921485.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:45.900Z,1528921485.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:46.301Z,1528921486.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:46.701Z,1528921486.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:47.097Z,1528921487.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:47.500Z,1528921487.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:47.901Z,1528921487.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:48.300Z,1528921488.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:48.713Z,1528921488.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:49.114Z,1528921489.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:50.306Z,1528921490.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:50.464Z,1528921490.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:50.861Z,1528921490.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:51.268Z,1528921491.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:51.668Z,1528921491.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:52.060Z,1528921492.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:52.465Z,1528921492.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:52.841Z,1528921492.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:53.241Z,1528921493.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:53.674Z,1528921493.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:54.068Z,1528921494.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:55.229Z,1528921495.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:55.379Z,1528921495.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:55.781Z,1528921495.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:56.182Z,1528921496.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:56.582Z,1528921496.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:56.976Z,1528921496.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:57.385Z,1528921497.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:57.805Z,1528921497.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:58.188Z,1528921498.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:58.604Z,1528921498.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:59.798Z,1528921499.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:24:59.882Z,1528921499.882 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:24:59.956Z,1528921499.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:00.341Z,1528921500.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:00.745Z,1528921500.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:01.140Z,1528921501.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:01.533Z,1528921501.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:01.933Z,1528921501.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:02.332Z,1528921502.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:02.752Z,1528921502.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:03.141Z,1528921503.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:04.334Z,1528921504.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:04.491Z,1528921504.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:04.887Z,1528921504.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:05.305Z,1528921505.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:05.687Z,1528921505.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:06.092Z,1528921506.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:06.496Z,1528921506.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:06.869Z,1528921506.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:07.274Z,1528921507.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:07.700Z,1528921507.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:08.078Z,1528921508.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:09.261Z,1528921509.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:09.403Z,1528921509.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:09.814Z,1528921509.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:10.229Z,1528921510.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:10.617Z,1528921510.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:11.005Z,1528921511.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:11.392Z,1528921511.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:11.824Z,1528921511.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:12.218Z,1528921512.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:13.383Z,1528921513.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:13.519Z,1528921513.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:13.925Z,1528921513.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:14.332Z,1528921514.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:14.726Z,1528921514.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:15.124Z,1528921515.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:15.520Z,1528921515.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:15.919Z,1528921515.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:16.319Z,1528921516.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:16.735Z,1528921516.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:17.132Z,1528921517.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:18.296Z,1528921518.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:18.467Z,1528921518.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:18.870Z,1528921518.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:19.270Z,1528921519.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:19.670Z,1528921519.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:20.048Z,1528921520.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:20.476Z,1528921520.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:20.844Z,1528921520.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:21.269Z,1528921521.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:22.422Z,1528921522.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:22.566Z,1528921522.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:22.978Z,1528921522.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:23.384Z,1528921523.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:23.779Z,1528921523.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:24.173Z,1528921524.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:24.588Z,1528921524.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:24.952Z,1528921524.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:25.360Z,1528921525.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:25.792Z,1528921525.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:26.167Z,1528921526.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:27.356Z,1528921527.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:27.482Z,1528921527.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:27.901Z,1528921527.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:28.301Z,1528921528.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:28.700Z,1528921528.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:29.100Z,1528921529.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:29.514Z,1528921529.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:29.880Z,1528921529.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:30.284Z,1528921530.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:30.716Z,1528921530.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:32.113Z,1528921532.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:32.261Z,1528921532.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:32.672Z,1528921532.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:33.066Z,1528921533.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:33.465Z,1528921533.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:33.864Z,1528921533.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:34.264Z,1528921534.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:34.680Z,1528921534.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:35.076Z,1528921535.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:36.259Z,1528921536.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:36.416Z,1528921536.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:36.814Z,1528921536.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:37.214Z,1528921537.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:37.613Z,1528921537.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:38.009Z,1528921538.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:38.409Z,1528921538.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:38.829Z,1528921538.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:39.219Z,1528921539.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:39.616Z,1528921539.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:40.867Z,1528921540.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:41.027Z,1528921541.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:41.443Z,1528921541.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:41.832Z,1528921541.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:42.229Z,1528921542.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:42.617Z,1528921542.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:43.029Z,1528921543.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:43.421Z,1528921543.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:43.841Z,1528921543.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:44.230Z,1528921544.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:45.374Z,1528921545.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:45.495Z,1528921545.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:45.932Z,1528921545.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:46.332Z,1528921546.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:46.726Z,1528921546.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:47.122Z,1528921547.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:47.537Z,1528921547.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:47.904Z,1528921547.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:48.304Z,1528921548.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:48.733Z,1528921548.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:49.900Z,1528921549.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:50.060Z,1528921550.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:50.446Z,1528921550.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:50.856Z,1528921550.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:51.256Z,1528921551.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:51.637Z,1528921551.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:52.044Z,1528921552.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:52.438Z,1528921552.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:52.856Z,1528921552.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:53.256Z,1528921553.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:54.399Z,1528921554.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:54.540Z,1528921554.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:54.938Z,1528921554.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:55.341Z,1528921555.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:55.737Z,1528921555.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:56.134Z,1528921556.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:56.552Z,1528921556.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:56.933Z,1528921556.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:57.340Z,1528921557.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:57.742Z,1528921557.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:58.948Z,1528921558.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:59.096Z,1528921559.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:59.434Z,1528921559.434 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:25:59.498Z,1528921559.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:25:59.893Z,1528921559.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:00.293Z,1528921560.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:00.688Z,1528921560.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:01.085Z,1528921561.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:01.493Z,1528921561.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:01.901Z,1528921561.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:02.300Z,1528921562.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:03.498Z,1528921563.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:03.655Z,1528921563.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:04.050Z,1528921564.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:04.452Z,1528921564.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:04.843Z,1528921564.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:05.241Z,1528921565.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:05.625Z,1528921565.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:06.041Z,1528921566.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:06.430Z,1528921566.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:06.876Z,1528921566.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:07.311Z,1528921567.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:08.765Z,1528921568.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:08.908Z,1528921568.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:09.314Z,1528921569.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:09.715Z,1528921569.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:10.110Z,1528921570.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:10.510Z,1528921570.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:10.908Z,1528921570.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:11.307Z,1528921571.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:11.720Z,1528921571.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:12.120Z,1528921572.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:13.299Z,1528921573.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:13.454Z,1528921573.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:13.866Z,1528921573.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:14.239Z,1528921574.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:14.664Z,1528921574.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:15.033Z,1528921575.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:15.434Z,1528921575.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:15.865Z,1528921575.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:16.245Z,1528921576.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:17.419Z,1528921577.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:17.552Z,1528921577.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:17.973Z,1528921577.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:18.372Z,1528921578.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:18.772Z,1528921578.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:19.149Z,1528921579.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:19.574Z,1528921579.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:19.972Z,1528921579.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:21.125Z,1528921581.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:21.279Z,1528921581.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:21.678Z,1528921581.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:22.082Z,1528921582.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:22.478Z,1528921582.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:22.874Z,1528921582.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:23.274Z,1528921583.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:23.690Z,1528921583.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:24.072Z,1528921584.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:24.482Z,1528921584.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:25.640Z,1528921585.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:25.801Z,1528921585.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:26.189Z,1528921586.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:26.587Z,1528921586.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:26.986Z,1528921586.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:27.383Z,1528921587.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:27.782Z,1528921587.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:28.177Z,1528921588.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:28.601Z,1528921588.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:28.987Z,1528921588.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:30.228Z,1528921590.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:30.349Z,1528921590.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:30.780Z,1528921590.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:31.188Z,1528921591.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:31.580Z,1528921591.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:31.976Z,1528921591.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:32.381Z,1528921592.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:32.791Z,1528921592.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:33.185Z,1528921593.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:34.336Z,1528921594.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:34.495Z,1528921594.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:34.892Z,1528921594.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:35.295Z,1528921595.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:35.695Z,1528921595.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:36.086Z,1528921596.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:36.485Z,1528921596.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:36.897Z,1528921596.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:37.296Z,1528921597.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:38.448Z,1528921598.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:38.600Z,1528921598.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:38.998Z,1528921598.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:39.396Z,1528921599.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:39.798Z,1528921599.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:40.194Z,1528921600.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:40.605Z,1528921600.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:40.995Z,1528921600.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:41.390Z,1528921601.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:41.844Z,1528921601.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:43.850Z,1528921603.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:43.993Z,1528921603.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:44.404Z,1528921604.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:44.797Z,1528921604.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:45.204Z,1528921605.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:45.595Z,1528921605.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:45.989Z,1528921605.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:46.375Z,1528921606.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:46.806Z,1528921606.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:47.203Z,1528921607.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:48.379Z,1528921608.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:48.562Z,1528921608.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:48.958Z,1528921608.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:49.362Z,1528921609.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:49.763Z,1528921609.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:50.136Z,1528921610.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:50.553Z,1528921610.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:50.969Z,1528921610.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:51.364Z,1528921611.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:52.525Z,1528921612.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:52.676Z,1528921612.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:53.072Z,1528921613.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:53.470Z,1528921613.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:53.876Z,1528921613.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:54.266Z,1528921614.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:54.667Z,1528921614.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:55.044Z,1528921615.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:55.473Z,1528921615.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:55.881Z,1528921615.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:56.273Z,1528921616.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:57.438Z,1528921617.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:57.584Z,1528921617.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:57.989Z,1528921617.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:58.389Z,1528921618.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:58.791Z,1528921618.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:59.180Z,1528921619.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:59.528Z,1528921619.528 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:26:59.596Z,1528921619.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:26:59.998Z,1528921619.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:00.390Z,1528921620.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:01.584Z,1528921621.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:01.740Z,1528921621.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:02.134Z,1528921622.134 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:02.134Z,1528921622.134 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 339
2018-06-13T20:27:02.134Z,1528921622.134 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:27:02.136Z,1528921622.136 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:02.136Z,1528921622.136 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 339
2018-06-13T20:27:02.136Z,1528921622.136 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:27:02.138Z,1528921622.138 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:02.138Z,1528921622.138 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 339
2018-06-13T20:27:02.138Z,1528921622.138 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:27:02.213Z,1528921622.213 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:27:02.213Z,1528921622.213 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:27:02.214Z,1528921622.214 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:27:02.625Z,1528921622.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:27:02.625Z,1528921622.625 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 339
2018-06-13T20:27:02.625Z,1528921622.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:27:02.625Z,1528921622.625 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 339
2018-06-13T20:27:02.626Z,1528921622.626 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:27:02.626Z,1528921622.626 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 339
2018-06-13T20:27:02.942Z,1528921622.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:27:02.942Z,1528921622.942 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:27:02.943Z,1528921622.943 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:27:02.943Z,1528921622.943 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:27:02.944Z,1528921622.944 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:27:02.944Z,1528921622.944 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:27:02.944Z,1528921622.944 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:27:02.949Z,1528921622.949 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:27:02.949Z,1528921622.949 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:27:03.320Z,1528921623.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T20:27:03.321Z,1528921623.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:03.719Z,1528921623.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T20:27:03.720Z,1528921623.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:04.115Z,1528921624.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T20:27:04.116Z,1528921624.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:04.524Z,1528921624.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T20:27:04.526Z,1528921624.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:04.950Z,1528921624.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T20:27:04.951Z,1528921624.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:05.330Z,1528921625.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T20:27:05.331Z,1528921625.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:06.522Z,1528921626.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T20:27:06.523Z,1528921626.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:06.663Z,1528921626.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T20:27:06.664Z,1528921626.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:07.084Z,1528921627.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T20:27:07.089Z,1528921627.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:07.474Z,1528921627.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T20:27:07.475Z,1528921627.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:07.874Z,1528921627.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T20:27:07.875Z,1528921627.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:08.268Z,1528921628.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T20:27:08.273Z,1528921628.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:08.668Z,1528921628.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T20:27:08.673Z,1528921628.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:09.052Z,1528921629.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T20:27:09.069Z,1528921629.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:09.452Z,1528921629.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T20:27:09.454Z,1528921629.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:09.890Z,1528921629.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T20:27:09.891Z,1528921629.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:10.283Z,1528921630.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T20:27:10.283Z,1528921630.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:11.489Z,1528921631.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T20:27:11.490Z,1528921631.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:11.638Z,1528921631.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T20:27:11.639Z,1528921631.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:12.048Z,1528921632.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T20:27:12.050Z,1528921632.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:12.449Z,1528921632.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T20:27:12.450Z,1528921632.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:12.849Z,1528921632.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T20:27:12.850Z,1528921632.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:13.236Z,1528921633.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T20:27:13.237Z,1528921633.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:13.655Z,1528921633.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T20:27:13.655Z,1528921633.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:14.040Z,1528921634.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T20:27:14.045Z,1528921634.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:14.447Z,1528921634.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T20:27:14.448Z,1528921634.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:15.610Z,1528921635.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-06-13T20:27:15.611Z,1528921635.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:15.791Z,1528921635.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T20:27:15.792Z,1528921635.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:16.182Z,1528921636.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T20:27:16.183Z,1528921636.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:16.584Z,1528921636.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T20:27:16.585Z,1528921636.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:16.981Z,1528921636.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T20:27:16.982Z,1528921636.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:17.371Z,1528921637.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T20:27:17.372Z,1528921637.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:17.783Z,1528921637.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T20:27:17.784Z,1528921637.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:18.173Z,1528921638.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T20:27:18.174Z,1528921638.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:18.572Z,1528921638.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T20:27:18.573Z,1528921638.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:18.992Z,1528921638.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T20:27:18.993Z,1528921638.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:19.384Z,1528921639.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T20:27:19.385Z,1528921639.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:20.570Z,1528921640.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T20:27:20.571Z,1528921640.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:20.732Z,1528921640.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T20:27:20.733Z,1528921640.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:21.127Z,1528921641.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T20:27:21.128Z,1528921641.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:21.529Z,1528921641.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T20:27:21.530Z,1528921641.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:21.972Z,1528921641.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T20:27:21.973Z,1528921641.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:22.459Z,1528921642.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:22.791Z,1528921642.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:23.110Z,1528921643.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:23.520Z,1528921643.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:23.930Z,1528921643.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:24.324Z,1528921644.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:25.501Z,1528921645.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:25.660Z,1528921645.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:26.064Z,1528921646.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:26.463Z,1528921646.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:26.862Z,1528921646.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:27.250Z,1528921647.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:27.670Z,1528921647.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:28.033Z,1528921648.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:28.469Z,1528921648.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:28.865Z,1528921648.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:30.026Z,1528921650.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:30.180Z,1528921650.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:30.569Z,1528921650.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:30.973Z,1528921650.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:31.368Z,1528921651.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:31.761Z,1528921651.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:32.170Z,1528921652.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:32.566Z,1528921652.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:32.984Z,1528921652.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:33.374Z,1528921653.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:34.579Z,1528921654.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:34.736Z,1528921654.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:35.132Z,1528921655.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:35.532Z,1528921655.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:35.932Z,1528921655.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:36.319Z,1528921656.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:36.728Z,1528921656.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:37.119Z,1528921657.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:37.523Z,1528921657.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:37.935Z,1528921657.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:38.333Z,1528921658.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:39.560Z,1528921659.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:39.691Z,1528921659.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:40.121Z,1528921660.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:40.525Z,1528921660.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:40.919Z,1528921660.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:41.322Z,1528921661.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:41.733Z,1528921661.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:42.096Z,1528921662.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:42.526Z,1528921662.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:43.674Z,1528921663.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:43.839Z,1528921663.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:44.240Z,1528921664.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:44.644Z,1528921664.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:45.044Z,1528921665.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:45.410Z,1528921665.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:45.810Z,1528921665.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:46.236Z,1528921666.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:46.613Z,1528921666.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:47.051Z,1528921667.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:47.445Z,1528921667.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:48.606Z,1528921668.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:48.755Z,1528921668.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:49.148Z,1528921669.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:49.560Z,1528921669.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:49.952Z,1528921669.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:50.347Z,1528921670.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:50.748Z,1528921670.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:51.149Z,1528921671.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:51.546Z,1528921671.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:51.958Z,1528921671.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:52.352Z,1528921672.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:53.532Z,1528921673.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:53.684Z,1528921673.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:54.112Z,1528921674.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:54.520Z,1528921674.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:54.916Z,1528921674.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:55.305Z,1528921675.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:55.716Z,1528921675.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:56.088Z,1528921676.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:56.515Z,1528921676.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:57.663Z,1528921677.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:57.820Z,1528921677.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:58.220Z,1528921678.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:58.620Z,1528921678.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:59.026Z,1528921679.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:59.414Z,1528921679.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:27:59.818Z,1528921679.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:00.156Z,1528921680.156 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:28:00.209Z,1528921680.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:00.619Z,1528921680.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:01.027Z,1528921681.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:01.424Z,1528921681.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:02.619Z,1528921682.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:02.780Z,1528921682.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:03.174Z,1528921683.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:03.575Z,1528921683.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:03.976Z,1528921683.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:04.372Z,1528921684.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:04.769Z,1528921684.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:05.152Z,1528921685.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:05.560Z,1528921685.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:05.988Z,1528921685.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:06.386Z,1528921686.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:07.584Z,1528921687.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:07.730Z,1528921687.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:08.146Z,1528921688.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:08.546Z,1528921688.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:08.956Z,1528921688.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:09.344Z,1528921689.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:09.753Z,1528921689.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:10.121Z,1528921690.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:10.556Z,1528921690.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:11.716Z,1528921691.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:11.890Z,1528921691.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:12.271Z,1528921692.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:12.672Z,1528921692.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:13.065Z,1528921693.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:13.453Z,1528921693.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:13.854Z,1528921693.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:14.260Z,1528921694.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:14.660Z,1528921694.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:15.068Z,1528921695.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:15.476Z,1528921695.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:16.650Z,1528921696.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:16.807Z,1528921696.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:17.206Z,1528921697.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:17.616Z,1528921697.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:18.005Z,1528921698.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:18.396Z,1528921698.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:18.802Z,1528921698.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:19.200Z,1528921699.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:19.605Z,1528921699.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:20.028Z,1528921700.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:20.415Z,1528921700.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:21.579Z,1528921701.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:21.743Z,1528921701.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:22.168Z,1528921702.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:22.563Z,1528921702.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:22.962Z,1528921702.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:23.361Z,1528921703.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:23.771Z,1528921703.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:24.136Z,1528921704.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:24.569Z,1528921704.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:25.770Z,1528921705.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:25.919Z,1528921705.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:26.320Z,1528921706.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:26.717Z,1528921706.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:27.124Z,1528921707.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:27.514Z,1528921707.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:27.909Z,1528921707.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:28.314Z,1528921708.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:28.697Z,1528921708.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:29.126Z,1528921709.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:29.520Z,1528921709.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:30.726Z,1528921710.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:30.889Z,1528921710.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:31.314Z,1528921711.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:31.716Z,1528921711.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:32.096Z,1528921712.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:32.483Z,1528921712.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:32.900Z,1528921712.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:33.283Z,1528921713.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:33.685Z,1528921713.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:34.101Z,1528921714.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:34.508Z,1528921714.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:35.730Z,1528921715.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:35.883Z,1528921715.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:36.283Z,1528921716.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:36.685Z,1528921716.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:37.075Z,1528921717.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:37.464Z,1528921717.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:37.860Z,1528921717.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:38.260Z,1528921718.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:38.661Z,1528921718.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:39.091Z,1528921719.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:39.486Z,1528921719.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:40.708Z,1528921720.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:40.850Z,1528921720.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:41.255Z,1528921721.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:41.742Z,1528921721.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:42.090Z,1528921722.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:42.452Z,1528921722.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:42.853Z,1528921722.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:43.253Z,1528921723.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:43.650Z,1528921723.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:44.066Z,1528921724.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:44.458Z,1528921724.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:45.859Z,1528921725.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:46.011Z,1528921726.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:46.410Z,1528921726.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:46.810Z,1528921726.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:47.217Z,1528921727.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:47.609Z,1528921727.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:48.013Z,1528921728.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:48.405Z,1528921728.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:48.820Z,1528921728.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:49.213Z,1528921729.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:50.407Z,1528921730.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:50.563Z,1528921730.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:50.965Z,1528921730.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:51.366Z,1528921731.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:51.766Z,1528921731.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:52.165Z,1528921732.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:52.571Z,1528921732.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:52.977Z,1528921732.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:53.374Z,1528921733.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:54.534Z,1528921734.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:54.671Z,1528921734.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:55.022Z,1528921735.022 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T20:28:55.022Z,1528921735.022 [NAL9602] Data Fault, FailCount= 3
2018-06-13T20:28:55.023Z,1528921735.023 [NAL9602](ERROR): Data Fault
2018-06-13T20:28:55.084Z,1528921735.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:55.165Z,1528921735.165 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T20:28:55.422Z,1528921735.422 [NAL9602](INFO): Powering down
2018-06-13T20:28:55.479Z,1528921735.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:55.872Z,1528921735.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:56.276Z,1528921736.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:56.358Z,1528921736.358 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T20:28:56.358Z,1528921736.358 [NAL9602] No Fault, FailCount= 3
2018-06-13T20:28:56.672Z,1528921736.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:57.066Z,1528921737.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:57.486Z,1528921737.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:57.856Z,1528921737.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:58.280Z,1528921738.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:58.660Z,1528921738.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:59.064Z,1528921739.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:59.464Z,1528921739.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:28:59.860Z,1528921739.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:00.264Z,1528921740.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:00.664Z,1528921740.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:01.016Z,1528921741.016 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:29:01.063Z,1528921741.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:01.464Z,1528921741.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:01.864Z,1528921741.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:02.261Z,1528921742.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:02.661Z,1528921742.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:03.060Z,1528921743.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:03.460Z,1528921743.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:03.860Z,1528921743.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:04.260Z,1528921744.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:04.657Z,1528921744.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:05.059Z,1528921745.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:05.461Z,1528921745.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:05.860Z,1528921745.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:06.281Z,1528921746.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:06.661Z,1528921746.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:07.057Z,1528921747.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:07.461Z,1528921747.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:07.860Z,1528921747.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:08.260Z,1528921748.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:08.656Z,1528921748.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:09.060Z,1528921749.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:09.464Z,1528921749.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:09.856Z,1528921749.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:10.260Z,1528921750.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:10.660Z,1528921750.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:11.055Z,1528921751.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:11.460Z,1528921751.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:11.859Z,1528921751.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:12.256Z,1528921752.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:12.659Z,1528921752.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:13.059Z,1528921753.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:13.456Z,1528921753.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:13.859Z,1528921753.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:14.260Z,1528921754.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:14.655Z,1528921754.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:15.060Z,1528921755.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:15.459Z,1528921755.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:15.856Z,1528921755.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:16.260Z,1528921756.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:16.804Z,1528921756.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:17.061Z,1528921757.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:17.554Z,1528921757.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:17.894Z,1528921757.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:18.270Z,1528921758.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:18.662Z,1528921758.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:19.058Z,1528921759.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:19.459Z,1528921759.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:19.864Z,1528921759.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:20.268Z,1528921760.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:20.660Z,1528921760.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:21.066Z,1528921761.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:21.464Z,1528921761.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:21.860Z,1528921761.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:22.262Z,1528921762.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:22.661Z,1528921762.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:23.068Z,1528921763.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:23.468Z,1528921763.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:23.861Z,1528921763.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:24.264Z,1528921764.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:24.668Z,1528921764.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:25.061Z,1528921765.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:25.464Z,1528921765.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:25.822Z,1528921765.822 [NAL9602](INFO): Powering up NAL9602
2018-06-13T20:29:25.880Z,1528921765.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:26.268Z,1528921766.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:26.659Z,1528921766.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:27.065Z,1528921767.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:27.474Z,1528921767.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:27.861Z,1528921767.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:28.268Z,1528921768.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:28.661Z,1528921768.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:29.064Z,1528921769.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:29.468Z,1528921769.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:29.862Z,1528921769.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:30.264Z,1528921770.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:30.672Z,1528921770.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:31.065Z,1528921771.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:31.464Z,1528921771.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:31.869Z,1528921771.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:32.265Z,1528921772.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:32.665Z,1528921772.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:33.068Z,1528921773.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:33.469Z,1528921773.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:33.864Z,1528921773.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:34.268Z,1528921774.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:34.666Z,1528921774.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:35.065Z,1528921775.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:35.472Z,1528921775.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:35.865Z,1528921775.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:36.264Z,1528921776.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:36.674Z,1528921776.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:37.022Z,1528921777.022 [NAL9602](INFO): NAL9602 initialized
2018-06-13T20:29:37.071Z,1528921777.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:37.467Z,1528921777.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:37.880Z,1528921777.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:38.284Z,1528921778.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:38.673Z,1528921778.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:39.073Z,1528921779.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:39.476Z,1528921779.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:39.865Z,1528921779.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:40.284Z,1528921780.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:40.673Z,1528921780.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:41.839Z,1528921781.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:42.013Z,1528921782.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:42.395Z,1528921782.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:42.795Z,1528921782.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:43.216Z,1528921783.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:43.592Z,1528921783.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:43.987Z,1528921783.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:44.416Z,1528921784.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:44.786Z,1528921784.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:45.217Z,1528921785.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:46.367Z,1528921786.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:46.520Z,1528921786.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:46.918Z,1528921786.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:47.322Z,1528921787.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:47.718Z,1528921787.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:48.116Z,1528921788.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:48.500Z,1528921788.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:48.921Z,1528921788.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:49.331Z,1528921789.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:49.728Z,1528921789.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:50.907Z,1528921790.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:51.077Z,1528921791.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:51.483Z,1528921791.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:51.928Z,1528921791.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:52.338Z,1528921792.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:52.732Z,1528921792.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:53.156Z,1528921793.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:53.483Z,1528921793.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:53.863Z,1528921793.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:55.035Z,1528921795.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:55.188Z,1528921795.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:55.596Z,1528921795.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:55.983Z,1528921795.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:56.389Z,1528921796.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:56.778Z,1528921796.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:57.176Z,1528921797.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:57.582Z,1528921797.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:57.975Z,1528921797.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:58.396Z,1528921798.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:58.788Z,1528921798.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:29:59.965Z,1528921799.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:00.127Z,1528921800.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:00.518Z,1528921800.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:00.926Z,1528921800.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:01.260Z,1528921801.260 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:30:01.326Z,1528921801.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:01.717Z,1528921801.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:02.121Z,1528921802.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:02.529Z,1528921802.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:02.924Z,1528921802.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:03.325Z,1528921803.325 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:03.325Z,1528921803.325 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 340
2018-06-13T20:30:03.325Z,1528921803.325 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:30:03.327Z,1528921803.327 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:03.327Z,1528921803.327 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 340
2018-06-13T20:30:03.327Z,1528921803.327 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:30:03.329Z,1528921803.329 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:03.329Z,1528921803.329 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 340
2018-06-13T20:30:03.329Z,1528921803.329 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:30:03.408Z,1528921803.408 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:30:03.408Z,1528921803.408 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:30:03.408Z,1528921803.408 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:30:04.570Z,1528921804.570 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:30:04.570Z,1528921804.570 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 340
2018-06-13T20:30:04.571Z,1528921804.571 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:30:04.571Z,1528921804.571 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 340
2018-06-13T20:30:04.571Z,1528921804.571 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:30:04.571Z,1528921804.571 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 340
2018-06-13T20:30:04.655Z,1528921804.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:30:04.656Z,1528921804.656 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:30:04.656Z,1528921804.656 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:30:04.656Z,1528921804.656 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:30:04.661Z,1528921804.661 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:30:04.661Z,1528921804.661 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:30:04.662Z,1528921804.662 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:30:04.662Z,1528921804.662 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:30:04.662Z,1528921804.662 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:30:05.060Z,1528921805.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T20:30:05.061Z,1528921805.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:05.443Z,1528921805.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T20:30:05.444Z,1528921805.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:05.851Z,1528921805.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T20:30:05.852Z,1528921805.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:06.241Z,1528921806.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T20:30:06.242Z,1528921806.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:06.637Z,1528921806.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T20:30:06.638Z,1528921806.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:07.038Z,1528921807.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T20:30:07.039Z,1528921807.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:07.453Z,1528921807.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T20:30:07.454Z,1528921807.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:07.846Z,1528921807.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T20:30:07.847Z,1528921807.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:09.057Z,1528921809.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T20:30:09.058Z,1528921809.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:09.198Z,1528921809.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T20:30:09.199Z,1528921809.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:09.593Z,1528921809.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T20:30:09.594Z,1528921809.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:09.999Z,1528921809.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T20:30:09.999Z,1528921809.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:10.436Z,1528921810.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T20:30:10.437Z,1528921810.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:10.790Z,1528921810.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T20:30:10.791Z,1528921810.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:11.204Z,1528921811.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T20:30:11.205Z,1528921811.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:11.594Z,1528921811.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T20:30:11.595Z,1528921811.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:11.997Z,1528921811.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T20:30:11.998Z,1528921811.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:13.189Z,1528921813.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T20:30:13.190Z,1528921813.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:13.347Z,1528921813.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T20:30:13.348Z,1528921813.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:13.748Z,1528921813.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T20:30:13.750Z,1528921813.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:14.145Z,1528921814.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T20:30:14.146Z,1528921814.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:14.543Z,1528921814.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T20:30:14.544Z,1528921814.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:14.944Z,1528921814.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T20:30:14.949Z,1528921814.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:15.325Z,1528921815.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T20:30:15.326Z,1528921815.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:15.725Z,1528921815.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T20:30:15.726Z,1528921815.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:16.128Z,1528921816.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T20:30:16.129Z,1528921816.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:16.564Z,1528921816.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T20:30:16.565Z,1528921816.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:16.935Z,1528921816.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T20:30:16.936Z,1528921816.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:18.117Z,1528921818.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T20:30:18.118Z,1528921818.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:18.254Z,1528921818.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T20:30:18.255Z,1528921818.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:18.681Z,1528921818.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T20:30:18.682Z,1528921818.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:19.074Z,1528921819.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T20:30:19.075Z,1528921819.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:19.479Z,1528921819.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T20:30:19.480Z,1528921819.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:19.873Z,1528921819.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T20:30:19.874Z,1528921819.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:20.276Z,1528921820.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T20:30:20.281Z,1528921820.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:20.661Z,1528921820.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T20:30:20.662Z,1528921820.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:21.075Z,1528921821.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T20:30:21.076Z,1528921821.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:21.477Z,1528921821.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T20:30:21.478Z,1528921821.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:21.877Z,1528921821.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T20:30:21.878Z,1528921821.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:23.074Z,1528921823.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T20:30:23.075Z,1528921823.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:23.224Z,1528921823.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T20:30:23.224Z,1528921823.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:23.628Z,1528921823.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:24.026Z,1528921824.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:24.425Z,1528921824.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:24.825Z,1528921824.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:25.233Z,1528921825.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:25.600Z,1528921825.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:26.032Z,1528921826.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:28.163Z,1528921828.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:28.321Z,1528921828.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:28.742Z,1528921828.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:29.144Z,1528921829.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:29.539Z,1528921829.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:29.937Z,1528921829.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:30.320Z,1528921830.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:30.716Z,1528921830.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:31.141Z,1528921831.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:31.556Z,1528921831.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:31.954Z,1528921831.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:33.110Z,1528921833.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:33.267Z,1528921833.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:33.666Z,1528921833.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:34.069Z,1528921834.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:34.466Z,1528921834.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:34.862Z,1528921834.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:35.264Z,1528921835.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:35.649Z,1528921835.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:36.058Z,1528921836.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:36.475Z,1528921836.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:36.872Z,1528921836.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:38.039Z,1528921838.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:38.223Z,1528921838.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:38.616Z,1528921838.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:39.018Z,1528921839.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:39.420Z,1528921839.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:39.793Z,1528921839.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:40.226Z,1528921840.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:40.590Z,1528921840.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:41.024Z,1528921841.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:42.192Z,1528921842.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:42.343Z,1528921842.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:42.772Z,1528921842.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:43.180Z,1528921843.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:43.569Z,1528921843.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:43.960Z,1528921843.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:44.357Z,1528921844.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:44.758Z,1528921844.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:45.164Z,1528921845.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:45.580Z,1528921845.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:45.969Z,1528921845.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:47.156Z,1528921847.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:47.319Z,1528921847.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:47.711Z,1528921847.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:48.113Z,1528921848.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:48.515Z,1528921848.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:48.920Z,1528921848.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:49.317Z,1528921849.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:49.696Z,1528921849.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:50.100Z,1528921850.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:50.531Z,1528921850.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:50.906Z,1528921850.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:52.083Z,1528921852.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:52.244Z,1528921852.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:52.642Z,1528921852.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:53.048Z,1528921853.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:53.447Z,1528921853.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:53.834Z,1528921853.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:54.262Z,1528921854.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:54.638Z,1528921854.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:55.048Z,1528921855.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:56.205Z,1528921856.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:56.338Z,1528921856.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:56.747Z,1528921856.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:57.154Z,1528921857.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:57.551Z,1528921857.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:57.949Z,1528921857.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:58.353Z,1528921858.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:58.731Z,1528921858.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:59.137Z,1528921859.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:59.564Z,1528921859.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:30:59.938Z,1528921859.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:01.157Z,1528921861.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:01.249Z,1528921861.249 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:31:01.322Z,1528921861.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:01.758Z,1528921861.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:02.129Z,1528921862.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:02.511Z,1528921862.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:02.892Z,1528921862.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:03.292Z,1528921863.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:03.689Z,1528921863.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:04.096Z,1528921864.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:04.521Z,1528921864.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:04.915Z,1528921864.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:06.337Z,1528921866.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:06.496Z,1528921866.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:06.888Z,1528921866.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:07.285Z,1528921867.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:07.685Z,1528921867.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:08.072Z,1528921868.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:08.484Z,1528921868.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:08.896Z,1528921868.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:09.291Z,1528921869.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:09.688Z,1528921869.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:10.899Z,1528921870.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:11.068Z,1528921871.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:11.467Z,1528921871.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:11.870Z,1528921871.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:12.270Z,1528921872.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:12.647Z,1528921872.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:13.050Z,1528921873.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:13.484Z,1528921873.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:13.871Z,1528921873.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:15.028Z,1528921875.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:15.180Z,1528921875.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:15.591Z,1528921875.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:15.991Z,1528921875.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:16.392Z,1528921876.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:16.790Z,1528921876.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:17.166Z,1528921877.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:17.590Z,1528921877.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:17.996Z,1528921877.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:19.147Z,1528921879.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:19.292Z,1528921879.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:19.699Z,1528921879.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:20.099Z,1528921880.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:20.496Z,1528921880.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:20.882Z,1528921880.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:21.302Z,1528921881.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:21.672Z,1528921881.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:22.098Z,1528921882.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:23.264Z,1528921883.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:23.424Z,1528921883.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:23.810Z,1528921883.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:24.214Z,1528921884.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:24.609Z,1528921884.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:25.012Z,1528921885.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:25.415Z,1528921885.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:25.806Z,1528921885.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:26.209Z,1528921886.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:26.625Z,1528921886.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:27.020Z,1528921887.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:28.180Z,1528921888.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:28.359Z,1528921888.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:28.757Z,1528921888.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:29.164Z,1528921889.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:29.560Z,1528921889.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:29.935Z,1528921889.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:30.336Z,1528921890.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:30.731Z,1528921890.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:31.133Z,1528921891.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:31.566Z,1528921891.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:31.966Z,1528921891.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:33.165Z,1528921893.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:33.316Z,1528921893.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:33.726Z,1528921893.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:34.125Z,1528921894.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:34.526Z,1528921894.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:34.912Z,1528921894.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:35.329Z,1528921895.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:35.721Z,1528921895.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:36.128Z,1528921896.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:37.286Z,1528921897.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:37.467Z,1528921897.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:37.872Z,1528921897.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:38.271Z,1528921898.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:38.668Z,1528921898.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:39.068Z,1528921899.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:39.448Z,1528921899.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:39.848Z,1528921899.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:40.277Z,1528921900.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:40.680Z,1528921900.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:41.078Z,1528921901.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:42.250Z,1528921902.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:42.395Z,1528921902.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:42.802Z,1528921902.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:43.200Z,1528921903.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:43.604Z,1528921903.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:43.997Z,1528921903.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:44.390Z,1528921904.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:44.790Z,1528921904.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:45.208Z,1528921905.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:45.631Z,1528921905.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:46.003Z,1528921906.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:47.186Z,1528921907.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:47.315Z,1528921907.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:47.744Z,1528921907.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:48.152Z,1528921908.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:48.543Z,1528921908.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:48.945Z,1528921908.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:49.354Z,1528921909.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:49.716Z,1528921909.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:50.146Z,1528921910.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:51.314Z,1528921911.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:51.489Z,1528921911.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:51.868Z,1528921911.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:52.266Z,1528921912.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:52.666Z,1528921912.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:53.060Z,1528921913.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:53.468Z,1528921913.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:53.860Z,1528921913.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:54.262Z,1528921914.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:54.686Z,1528921914.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:55.067Z,1528921915.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:56.293Z,1528921916.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:56.423Z,1528921916.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:56.851Z,1528921916.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:57.260Z,1528921917.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:57.648Z,1528921917.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:58.050Z,1528921918.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:58.447Z,1528921918.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:58.828Z,1528921918.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:59.230Z,1528921919.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:31:59.656Z,1528921919.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:00.051Z,1528921920.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:01.260Z,1528921921.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:01.362Z,1528921921.362 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:32:01.448Z,1528921921.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:01.828Z,1528921921.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:02.232Z,1528921922.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:02.624Z,1528921922.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:03.015Z,1528921923.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:03.425Z,1528921923.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:03.814Z,1528921923.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:04.217Z,1528921924.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:04.636Z,1528921924.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:05.027Z,1528921925.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:06.260Z,1528921926.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:06.424Z,1528921926.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:06.821Z,1528921926.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:07.219Z,1528921927.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:07.632Z,1528921927.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:08.017Z,1528921928.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:08.420Z,1528921928.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:08.816Z,1528921928.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:09.220Z,1528921929.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:09.631Z,1528921929.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:10.022Z,1528921930.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:11.233Z,1528921931.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:11.423Z,1528921931.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:11.819Z,1528921931.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:12.217Z,1528921932.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:12.615Z,1528921932.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:13.010Z,1528921933.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:13.412Z,1528921933.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:13.813Z,1528921933.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:14.211Z,1528921934.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:14.628Z,1528921934.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:15.015Z,1528921935.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:16.228Z,1528921936.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:16.371Z,1528921936.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:16.878Z,1528921936.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:17.185Z,1528921937.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:17.646Z,1528921937.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:17.979Z,1528921937.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:18.388Z,1528921938.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:18.748Z,1528921938.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:19.176Z,1528921939.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:20.334Z,1528921940.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:20.482Z,1528921940.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:20.880Z,1528921940.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:21.281Z,1528921941.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:21.704Z,1528921941.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:22.072Z,1528921942.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:22.462Z,1528921942.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:22.867Z,1528921942.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:23.267Z,1528921943.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:23.678Z,1528921943.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:24.071Z,1528921944.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:25.257Z,1528921945.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:25.411Z,1528921945.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:25.805Z,1528921945.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:26.216Z,1528921946.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:26.610Z,1528921946.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:27.019Z,1528921947.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:27.417Z,1528921947.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:27.797Z,1528921947.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:28.208Z,1528921948.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:28.613Z,1528921948.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:29.758Z,1528921949.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:29.916Z,1528921949.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:30.309Z,1528921950.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:30.715Z,1528921950.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:31.114Z,1528921951.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:31.490Z,1528921951.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:31.890Z,1528921951.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:32.294Z,1528921952.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:32.722Z,1528921952.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:33.119Z,1528921953.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:34.335Z,1528921954.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:34.484Z,1528921954.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:34.916Z,1528921954.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:35.292Z,1528921955.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:35.692Z,1528921955.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:36.088Z,1528921956.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:36.496Z,1528921956.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:36.886Z,1528921956.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:37.288Z,1528921957.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:37.720Z,1528921957.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:38.097Z,1528921958.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:39.328Z,1528921959.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:39.483Z,1528921959.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:39.877Z,1528921959.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:40.284Z,1528921960.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:40.678Z,1528921960.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:41.074Z,1528921961.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:41.476Z,1528921961.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:41.869Z,1528921961.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:42.277Z,1528921962.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:42.690Z,1528921962.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:43.086Z,1528921963.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:44.296Z,1528921964.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:44.443Z,1528921964.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:44.841Z,1528921964.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:45.246Z,1528921965.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:45.649Z,1528921965.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:46.032Z,1528921966.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:46.433Z,1528921966.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:46.824Z,1528921966.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:47.237Z,1528921967.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:47.657Z,1528921967.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:48.042Z,1528921968.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:49.293Z,1528921969.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:49.446Z,1528921969.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:49.850Z,1528921969.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:50.246Z,1528921970.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:50.646Z,1528921970.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:51.046Z,1528921971.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:51.455Z,1528921971.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:51.856Z,1528921971.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:52.260Z,1528921972.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:53.803Z,1528921973.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:53.960Z,1528921973.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:54.422Z,1528921974.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:54.761Z,1528921974.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:55.157Z,1528921975.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:55.544Z,1528921975.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:55.950Z,1528921975.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:56.350Z,1528921976.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:56.768Z,1528921976.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:57.157Z,1528921977.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:58.319Z,1528921978.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:58.500Z,1528921978.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:58.903Z,1528921978.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:59.299Z,1528921979.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:32:59.700Z,1528921979.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:00.073Z,1528921980.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:00.470Z,1528921980.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:00.869Z,1528921980.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:01.280Z,1528921981.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:01.624Z,1528921981.624 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:33:01.704Z,1528921981.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:02.107Z,1528921982.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:03.252Z,1528921983.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:03.378Z,1528921983.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:03.808Z,1528921983.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:04.210Z,1528921984.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:04.609Z,1528921984.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:04.984Z,1528921984.984 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:04.984Z,1528921984.984 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 341
2018-06-13T20:33:04.984Z,1528921984.984 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:33:04.986Z,1528921984.986 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:04.986Z,1528921984.986 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 341
2018-06-13T20:33:04.987Z,1528921984.987 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:33:04.988Z,1528921984.988 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:04.988Z,1528921984.988 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 341
2018-06-13T20:33:04.988Z,1528921984.988 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:33:05.085Z,1528921985.085 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:33:05.085Z,1528921985.085 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:33:05.086Z,1528921985.086 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:33:05.493Z,1528921985.493 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:33:05.493Z,1528921985.493 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 341
2018-06-13T20:33:05.494Z,1528921985.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:33:05.494Z,1528921985.494 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 341
2018-06-13T20:33:05.494Z,1528921985.494 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:33:05.494Z,1528921985.494 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 341
2018-06-13T20:33:05.811Z,1528921985.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:33:05.812Z,1528921985.812 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:33:05.812Z,1528921985.812 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:33:05.813Z,1528921985.813 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:33:05.813Z,1528921985.813 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:33:05.813Z,1528921985.813 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:33:05.814Z,1528921985.814 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:33:05.814Z,1528921985.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:33:05.814Z,1528921985.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:33:06.199Z,1528921986.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T20:33:06.199Z,1528921986.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:07.372Z,1528921987.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T20:33:07.373Z,1528921987.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:07.535Z,1528921987.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T20:33:07.536Z,1528921987.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:07.929Z,1528921987.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T20:33:07.930Z,1528921987.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:08.331Z,1528921988.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T20:33:08.332Z,1528921988.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:08.736Z,1528921988.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T20:33:08.737Z,1528921988.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:09.122Z,1528921989.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T20:33:09.123Z,1528921989.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:09.521Z,1528921989.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T20:33:09.522Z,1528921989.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:09.909Z,1528921989.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T20:33:09.910Z,1528921989.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:10.313Z,1528921990.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T20:33:10.314Z,1528921990.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:10.741Z,1528921990.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T20:33:10.742Z,1528921990.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:11.127Z,1528921991.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T20:33:11.128Z,1528921991.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:12.337Z,1528921992.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T20:33:12.338Z,1528921992.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:12.501Z,1528921992.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T20:33:12.502Z,1528921992.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:12.903Z,1528921992.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T20:33:12.904Z,1528921992.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:13.313Z,1528921993.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T20:33:13.315Z,1528921993.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:13.694Z,1528921993.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T20:33:13.695Z,1528921993.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:14.088Z,1528921994.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T20:33:14.093Z,1528921994.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:14.500Z,1528921994.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T20:33:14.501Z,1528921994.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:14.885Z,1528921994.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T20:33:14.886Z,1528921994.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:15.300Z,1528921995.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T20:33:15.305Z,1528921995.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:15.711Z,1528921995.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T20:33:15.712Z,1528921995.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:16.105Z,1528921996.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T20:33:16.106Z,1528921996.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:17.275Z,1528921997.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T20:33:17.276Z,1528921997.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:17.428Z,1528921997.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T20:33:17.428Z,1528921997.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:17.850Z,1528921997.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T20:33:17.851Z,1528921997.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:18.260Z,1528921998.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T20:33:18.261Z,1528921998.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:18.634Z,1528921998.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T20:33:18.635Z,1528921998.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:19.026Z,1528921999.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T20:33:19.027Z,1528921999.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:19.462Z,1528921999.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T20:33:19.463Z,1528921999.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:19.827Z,1528921999.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T20:33:19.828Z,1528921999.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:20.260Z,1528922000.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T20:33:20.265Z,1528922000.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:21.421Z,1528922001.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T20:33:21.422Z,1528922001.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:21.575Z,1528922001.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T20:33:21.576Z,1528922001.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:21.974Z,1528922001.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T20:33:21.975Z,1528922001.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:22.371Z,1528922002.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T20:33:22.372Z,1528922002.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:22.770Z,1528922002.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T20:33:22.771Z,1528922002.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:23.165Z,1528922003.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T20:33:23.166Z,1528922003.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:23.571Z,1528922003.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T20:33:23.572Z,1528922003.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:23.960Z,1528922003.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T20:33:23.965Z,1528922003.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:24.368Z,1528922004.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T20:33:24.370Z,1528922004.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:24.785Z,1528922004.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T20:33:24.786Z,1528922004.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:25.175Z,1528922005.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:26.380Z,1528922006.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:26.523Z,1528922006.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:26.935Z,1528922006.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:27.338Z,1528922007.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:27.750Z,1528922007.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:28.135Z,1528922008.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:28.510Z,1528922008.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:28.904Z,1528922008.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:29.313Z,1528922009.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:29.744Z,1528922009.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:30.136Z,1528922010.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:31.544Z,1528922011.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:31.699Z,1528922011.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:32.095Z,1528922012.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:32.497Z,1528922012.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:32.894Z,1528922012.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:33.300Z,1528922013.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:33.675Z,1528922013.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:34.078Z,1528922014.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:34.508Z,1528922014.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:34.906Z,1528922014.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:36.117Z,1528922016.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:36.251Z,1528922016.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:36.664Z,1528922016.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:37.067Z,1528922017.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:37.466Z,1528922017.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:37.859Z,1528922017.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:38.258Z,1528922018.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:38.677Z,1528922018.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:39.076Z,1528922019.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:40.225Z,1528922020.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:40.384Z,1528922020.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:40.769Z,1528922020.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:41.170Z,1528922021.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:41.570Z,1528922021.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:41.963Z,1528922021.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:42.368Z,1528922022.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:42.780Z,1528922022.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:43.178Z,1528922023.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:44.355Z,1528922024.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:44.512Z,1528922024.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:44.920Z,1528922024.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:45.314Z,1528922025.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:45.711Z,1528922025.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:46.113Z,1528922026.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:46.525Z,1528922026.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:46.911Z,1528922026.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:47.320Z,1528922027.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:48.487Z,1528922028.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:48.665Z,1528922028.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:49.063Z,1528922029.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:49.467Z,1528922029.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:49.846Z,1528922029.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:50.246Z,1528922030.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:50.640Z,1528922030.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:51.040Z,1528922031.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:51.441Z,1528922031.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:51.871Z,1528922031.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:52.247Z,1528922032.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:53.478Z,1528922033.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:53.635Z,1528922033.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:54.033Z,1528922034.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:54.438Z,1528922034.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:54.839Z,1528922034.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:55.225Z,1528922035.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:55.635Z,1528922035.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:56.028Z,1528922036.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:56.434Z,1528922036.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:56.844Z,1528922036.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:57.238Z,1528922037.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:58.442Z,1528922038.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:58.595Z,1528922038.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:58.992Z,1528922038.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:59.391Z,1528922039.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:33:59.805Z,1528922039.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:00.172Z,1528922040.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:00.590Z,1528922040.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:00.989Z,1528922040.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:01.368Z,1528922041.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:01.724Z,1528922041.724 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:34:01.820Z,1528922041.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:02.201Z,1528922042.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:03.557Z,1528922043.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:03.708Z,1528922043.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:04.107Z,1528922044.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:04.508Z,1528922044.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:04.904Z,1528922044.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:05.281Z,1528922045.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:05.705Z,1528922045.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:06.082Z,1528922046.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:06.486Z,1528922046.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:06.914Z,1528922046.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:07.306Z,1528922047.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:08.513Z,1528922048.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:08.655Z,1528922048.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:09.076Z,1528922049.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:09.474Z,1528922049.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:09.871Z,1528922049.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:10.268Z,1528922050.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:10.669Z,1528922050.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:11.073Z,1528922051.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:11.477Z,1528922051.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:11.892Z,1528922051.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:12.279Z,1528922052.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:13.490Z,1528922053.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:13.640Z,1528922053.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:14.045Z,1528922054.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:14.449Z,1528922054.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:14.845Z,1528922054.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:15.236Z,1528922055.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:15.638Z,1528922055.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:16.037Z,1528922056.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:16.444Z,1528922056.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:16.856Z,1528922056.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:17.246Z,1528922057.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:18.455Z,1528922058.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:18.611Z,1528922058.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:19.040Z,1528922059.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:19.433Z,1528922059.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:19.831Z,1528922059.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:20.230Z,1528922060.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:20.638Z,1528922060.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:21.011Z,1528922061.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:21.414Z,1528922061.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:21.844Z,1528922061.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:22.244Z,1528922062.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:23.459Z,1528922063.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:23.631Z,1528922063.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:24.037Z,1528922064.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:24.442Z,1528922064.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:24.838Z,1528922064.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:25.212Z,1528922065.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:25.612Z,1528922065.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:26.009Z,1528922066.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:26.413Z,1528922066.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:26.840Z,1528922066.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:27.238Z,1528922067.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:28.455Z,1528922068.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:28.599Z,1528922068.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:28.998Z,1528922068.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:29.400Z,1528922069.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:29.795Z,1528922069.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:30.193Z,1528922070.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:30.616Z,1528922070.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:30.980Z,1528922070.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:31.398Z,1528922071.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:32.601Z,1528922072.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:32.719Z,1528922072.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:33.143Z,1528922073.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:33.556Z,1528922073.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:33.946Z,1528922073.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:34.341Z,1528922074.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:34.724Z,1528922074.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:35.148Z,1528922075.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:35.529Z,1528922075.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:35.957Z,1528922075.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:36.347Z,1528922076.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:39.014Z,1528922079.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:39.147Z,1528922079.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:39.565Z,1528922079.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:39.966Z,1528922079.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:40.366Z,1528922080.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:40.761Z,1528922080.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:41.170Z,1528922081.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:41.575Z,1528922081.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:41.976Z,1528922081.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:43.147Z,1528922083.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:43.324Z,1528922083.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:43.722Z,1528922083.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:44.129Z,1528922084.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:44.522Z,1528922084.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:44.921Z,1528922084.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:45.314Z,1528922085.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:45.740Z,1528922085.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:46.125Z,1528922086.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:47.284Z,1528922087.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:47.422Z,1528922087.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:47.840Z,1528922087.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:48.259Z,1528922088.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:48.640Z,1528922088.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:49.040Z,1528922089.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:49.434Z,1528922089.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:49.850Z,1528922089.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:50.280Z,1528922090.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:51.407Z,1528922091.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:51.554Z,1528922091.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:51.982Z,1528922091.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:52.386Z,1528922092.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:52.787Z,1528922092.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:53.185Z,1528922093.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:53.592Z,1528922093.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:53.957Z,1528922093.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:54.392Z,1528922094.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:55.587Z,1528922095.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:55.736Z,1528922095.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:56.137Z,1528922096.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:56.548Z,1528922096.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:56.944Z,1528922096.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:57.344Z,1528922097.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:57.719Z,1528922097.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:58.120Z,1528922098.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:58.524Z,1528922098.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:58.956Z,1528922098.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:34:59.347Z,1528922099.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:00.519Z,1528922100.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:00.663Z,1528922100.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:01.061Z,1528922101.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:01.474Z,1528922101.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:01.801Z,1528922101.801 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:35:01.872Z,1528922101.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:02.272Z,1528922102.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:02.654Z,1528922102.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:03.056Z,1528922103.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:03.463Z,1528922103.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:03.880Z,1528922103.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:04.263Z,1528922104.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:05.461Z,1528922105.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:05.586Z,1528922105.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:06.020Z,1528922106.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:06.427Z,1528922106.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:06.820Z,1528922106.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:07.210Z,1528922107.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:07.622Z,1528922107.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:07.992Z,1528922107.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:08.425Z,1528922108.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:09.581Z,1528922109.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:09.714Z,1528922109.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:10.128Z,1528922110.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:10.528Z,1528922110.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:10.923Z,1528922110.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:11.318Z,1528922111.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:11.717Z,1528922111.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:12.124Z,1528922112.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:12.524Z,1528922112.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:12.938Z,1528922112.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:13.330Z,1528922113.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:14.555Z,1528922114.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:14.707Z,1528922114.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:15.131Z,1528922115.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:15.535Z,1528922115.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:15.932Z,1528922115.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:16.311Z,1528922116.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:16.734Z,1528922116.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:17.108Z,1528922117.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:17.511Z,1528922117.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:17.940Z,1528922117.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:18.334Z,1528922118.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:19.579Z,1528922119.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:19.754Z,1528922119.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:20.149Z,1528922120.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:20.555Z,1528922120.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:20.957Z,1528922120.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:21.344Z,1528922121.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:21.743Z,1528922121.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:22.145Z,1528922122.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:22.556Z,1528922122.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:22.968Z,1528922122.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:23.361Z,1528922123.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:24.614Z,1528922124.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:24.754Z,1528922124.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:25.157Z,1528922125.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:25.561Z,1528922125.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:25.968Z,1528922125.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:26.356Z,1528922126.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:26.752Z,1528922126.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:27.148Z,1528922127.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:27.549Z,1528922127.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:27.965Z,1528922127.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:28.364Z,1528922128.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:29.599Z,1528922129.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:29.755Z,1528922129.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:30.155Z,1528922130.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:30.552Z,1528922130.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:30.954Z,1528922130.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:31.348Z,1528922131.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:31.757Z,1528922131.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:32.153Z,1528922132.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:32.560Z,1528922132.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:32.965Z,1528922132.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:33.359Z,1528922133.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:34.576Z,1528922134.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:34.727Z,1528922134.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:35.128Z,1528922135.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:35.531Z,1528922135.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:35.944Z,1528922135.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:36.313Z,1528922136.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:36.731Z,1528922136.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:37.119Z,1528922137.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:37.518Z,1528922137.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:37.940Z,1528922137.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:38.330Z,1528922138.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:39.572Z,1528922139.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:39.735Z,1528922139.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:40.131Z,1528922140.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:40.530Z,1528922140.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:40.931Z,1528922140.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:41.329Z,1528922141.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:41.725Z,1528922141.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:42.108Z,1528922142.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:42.524Z,1528922142.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:42.945Z,1528922142.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:43.338Z,1528922143.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:44.552Z,1528922144.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:44.699Z,1528922144.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:45.093Z,1528922145.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:45.498Z,1528922145.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:45.894Z,1528922145.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:46.290Z,1528922146.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:46.712Z,1528922146.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:47.089Z,1528922147.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:47.504Z,1528922147.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:48.660Z,1528922148.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:48.788Z,1528922148.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:49.212Z,1528922149.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:49.608Z,1528922149.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:50.007Z,1528922150.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:50.402Z,1528922150.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:50.802Z,1528922150.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:51.190Z,1528922151.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:51.657Z,1528922151.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:52.080Z,1528922152.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:52.422Z,1528922152.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:54.124Z,1528922154.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:54.291Z,1528922154.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:54.685Z,1528922154.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:55.082Z,1528922155.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:55.481Z,1528922155.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:55.871Z,1528922155.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:56.271Z,1528922156.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:56.688Z,1528922156.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:57.088Z,1528922157.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:58.260Z,1528922158.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:58.393Z,1528922158.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:58.822Z,1528922158.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:59.220Z,1528922159.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:59.621Z,1528922159.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:35:59.999Z,1528922159.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:00.420Z,1528922160.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:00.830Z,1528922160.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:01.204Z,1528922161.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:01.627Z,1528922161.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:02.795Z,1528922162.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:02.894Z,1528922162.894 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:36:02.975Z,1528922162.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:03.347Z,1528922163.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:03.751Z,1528922163.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:04.148Z,1528922164.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:04.541Z,1528922164.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:04.940Z,1528922164.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:05.342Z,1528922165.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:05.775Z,1528922165.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:06.151Z,1528922166.151 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:06.152Z,1528922166.151 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 342
2018-06-13T20:36:06.152Z,1528922166.152 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:36:06.153Z,1528922166.153 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:06.154Z,1528922166.154 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 342
2018-06-13T20:36:06.154Z,1528922166.154 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:36:06.155Z,1528922166.155 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:06.155Z,1528922166.155 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 342
2018-06-13T20:36:06.156Z,1528922166.156 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:36:06.249Z,1528922166.249 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:36:06.249Z,1528922166.249 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:36:06.250Z,1528922166.250 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:36:07.425Z,1528922167.425 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:36:07.425Z,1528922167.425 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 342
2018-06-13T20:36:07.425Z,1528922167.425 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:36:07.425Z,1528922167.425 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 342
2018-06-13T20:36:07.426Z,1528922167.426 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:36:07.426Z,1528922167.426 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 342
2018-06-13T20:36:07.510Z,1528922167.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:36:07.511Z,1528922167.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:36:07.511Z,1528922167.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:36:07.511Z,1528922167.511 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:36:07.512Z,1528922167.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:36:07.512Z,1528922167.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:36:07.512Z,1528922167.512 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:36:07.517Z,1528922167.517 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:36:07.517Z,1528922167.517 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:36:07.898Z,1528922167.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T20:36:07.899Z,1528922167.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:08.303Z,1528922168.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T20:36:08.304Z,1528922168.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:08.701Z,1528922168.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T20:36:08.702Z,1528922168.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:09.077Z,1528922169.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T20:36:09.078Z,1528922169.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:09.497Z,1528922169.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T20:36:09.498Z,1528922169.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:09.905Z,1528922169.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T20:36:09.906Z,1528922169.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:10.304Z,1528922170.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T20:36:10.306Z,1528922170.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:11.513Z,1528922171.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T20:36:11.514Z,1528922171.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:11.642Z,1528922171.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T20:36:11.642Z,1528922171.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:12.068Z,1528922172.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T20:36:12.069Z,1528922172.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:12.465Z,1528922172.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T20:36:12.466Z,1528922172.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:12.862Z,1528922172.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T20:36:12.863Z,1528922172.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:13.257Z,1528922173.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T20:36:13.258Z,1528922173.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:13.649Z,1528922173.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T20:36:13.650Z,1528922173.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:14.070Z,1528922174.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T20:36:14.071Z,1528922174.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:14.463Z,1528922174.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T20:36:14.464Z,1528922174.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:15.662Z,1528922175.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T20:36:15.663Z,1528922175.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:15.823Z,1528922175.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T20:36:15.824Z,1528922175.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:16.224Z,1528922176.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T20:36:16.225Z,1528922176.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:16.623Z,1528922176.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T20:36:16.624Z,1528922176.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:17.017Z,1528922177.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T20:36:17.018Z,1528922177.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:17.399Z,1528922177.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T20:36:17.400Z,1528922177.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:17.800Z,1528922177.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T20:36:17.801Z,1528922177.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:18.199Z,1528922178.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T20:36:18.200Z,1528922178.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:18.604Z,1528922178.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T20:36:18.621Z,1528922178.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:19.036Z,1528922179.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T20:36:19.036Z,1528922179.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:19.407Z,1528922179.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T20:36:19.407Z,1528922179.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:20.589Z,1528922180.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T20:36:20.590Z,1528922180.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:20.746Z,1528922180.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T20:36:20.747Z,1528922180.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:21.145Z,1528922181.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T20:36:21.146Z,1528922181.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:21.548Z,1528922181.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T20:36:21.549Z,1528922181.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:21.942Z,1528922181.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T20:36:21.943Z,1528922181.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:22.339Z,1528922182.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T20:36:22.340Z,1528922182.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:22.759Z,1528922182.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T20:36:22.760Z,1528922182.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:23.131Z,1528922183.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T20:36:23.132Z,1528922183.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:23.531Z,1528922183.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T20:36:23.532Z,1528922183.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:23.943Z,1528922183.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T20:36:23.944Z,1528922183.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:25.119Z,1528922185.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T20:36:25.120Z,1528922185.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:25.248Z,1528922185.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T20:36:25.249Z,1528922185.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:25.675Z,1528922185.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T20:36:25.676Z,1528922185.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:26.075Z,1528922186.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T20:36:26.076Z,1528922186.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:26.483Z,1528922186.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:26.862Z,1528922186.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:27.286Z,1528922187.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:27.662Z,1528922187.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:28.088Z,1528922188.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:28.466Z,1528922188.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:29.659Z,1528922189.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:29.838Z,1528922189.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:30.242Z,1528922190.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:30.643Z,1528922190.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:31.043Z,1528922191.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:31.417Z,1528922191.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:31.817Z,1528922191.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:32.216Z,1528922192.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:32.616Z,1528922192.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:33.047Z,1528922193.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:33.443Z,1528922193.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:34.619Z,1528922194.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:34.754Z,1528922194.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:35.166Z,1528922195.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:35.565Z,1528922195.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:35.966Z,1528922195.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:36.353Z,1528922196.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:36.776Z,1528922196.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:37.158Z,1528922197.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:37.569Z,1528922197.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:38.768Z,1528922198.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:38.894Z,1528922198.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:39.325Z,1528922199.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:39.714Z,1528922199.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:40.112Z,1528922200.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:40.510Z,1528922200.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:40.913Z,1528922200.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:41.288Z,1528922201.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:41.689Z,1528922201.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:42.128Z,1528922202.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:42.514Z,1528922202.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:43.740Z,1528922203.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:43.915Z,1528922203.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:44.299Z,1528922204.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:44.699Z,1528922204.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:45.099Z,1528922205.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:45.490Z,1528922205.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:45.892Z,1528922205.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:46.292Z,1528922206.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:46.696Z,1528922206.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:47.123Z,1528922207.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:47.499Z,1528922207.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:48.724Z,1528922208.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:48.869Z,1528922208.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:49.282Z,1528922209.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:49.683Z,1528922209.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:50.089Z,1528922210.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:50.464Z,1528922210.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:50.868Z,1528922210.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:51.296Z,1528922211.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:51.695Z,1528922211.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:52.100Z,1528922212.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:52.494Z,1528922212.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:53.715Z,1528922213.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:53.898Z,1528922213.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:54.296Z,1528922214.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:54.699Z,1528922214.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:55.095Z,1528922215.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:55.493Z,1528922215.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:55.877Z,1528922215.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:56.272Z,1528922216.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:56.677Z,1528922216.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:57.108Z,1528922217.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:57.506Z,1528922217.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:58.714Z,1528922218.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:58.865Z,1528922218.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:59.288Z,1528922219.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:36:59.674Z,1528922219.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:00.083Z,1528922220.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:00.461Z,1528922220.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:00.879Z,1528922220.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:01.262Z,1528922221.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:01.666Z,1528922221.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:02.100Z,1528922222.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:02.408Z,1528922222.408 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:37:02.579Z,1528922222.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:04.127Z,1528922224.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:04.287Z,1528922224.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:04.688Z,1528922224.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:05.084Z,1528922225.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:05.484Z,1528922225.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:05.860Z,1528922225.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:06.260Z,1528922226.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:06.661Z,1528922226.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:07.093Z,1528922227.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:07.492Z,1528922227.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:08.659Z,1528922228.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:08.830Z,1528922228.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:09.243Z,1528922229.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:09.611Z,1528922229.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:10.011Z,1528922230.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:10.406Z,1528922230.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:10.835Z,1528922230.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:11.208Z,1528922231.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:11.605Z,1528922231.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:12.014Z,1528922232.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:13.204Z,1528922233.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:13.318Z,1528922233.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:13.749Z,1528922233.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:14.153Z,1528922234.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:14.545Z,1528922234.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:14.946Z,1528922234.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:15.351Z,1528922235.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:15.745Z,1528922235.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:16.158Z,1528922236.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:16.552Z,1528922236.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:17.732Z,1528922237.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:17.904Z,1528922237.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:18.306Z,1528922238.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:18.705Z,1528922238.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:19.099Z,1528922239.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:19.479Z,1528922239.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:19.884Z,1528922239.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:20.284Z,1528922240.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:20.680Z,1528922240.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:21.110Z,1528922241.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:21.510Z,1528922241.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:22.665Z,1528922242.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:22.806Z,1528922242.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:23.213Z,1528922243.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:23.614Z,1528922243.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:24.012Z,1528922244.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:24.410Z,1528922244.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:24.821Z,1528922244.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:25.199Z,1528922245.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:25.618Z,1528922245.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:26.779Z,1528922246.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:26.931Z,1528922246.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:27.324Z,1528922247.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:27.720Z,1528922247.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:28.126Z,1528922248.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:28.524Z,1528922248.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:28.922Z,1528922248.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:29.301Z,1528922249.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:29.722Z,1528922249.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:30.133Z,1528922250.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:30.529Z,1528922250.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:31.726Z,1528922251.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:31.871Z,1528922251.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:32.287Z,1528922252.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:32.693Z,1528922252.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:33.090Z,1528922253.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:33.489Z,1528922253.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:33.897Z,1528922253.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:34.264Z,1528922254.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:34.677Z,1528922254.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:35.096Z,1528922255.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:35.479Z,1528922255.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:36.710Z,1528922256.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:36.860Z,1528922256.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:37.261Z,1528922257.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:37.662Z,1528922257.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:38.062Z,1528922258.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:38.462Z,1528922258.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:38.869Z,1528922258.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:39.258Z,1528922259.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:39.661Z,1528922259.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:40.886Z,1528922260.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:41.035Z,1528922261.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:41.468Z,1528922261.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:41.866Z,1528922261.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:42.267Z,1528922262.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:42.662Z,1528922262.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:43.064Z,1528922263.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:43.457Z,1528922263.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:43.872Z,1528922263.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:44.276Z,1528922264.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:45.477Z,1528922265.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:45.636Z,1528922265.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:46.024Z,1528922266.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:46.426Z,1528922266.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:46.832Z,1528922266.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:47.213Z,1528922267.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:47.615Z,1528922267.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:48.033Z,1528922268.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:48.426Z,1528922268.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:49.607Z,1528922269.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:49.752Z,1528922269.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:50.169Z,1528922270.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:50.566Z,1528922270.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:50.948Z,1528922270.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:51.343Z,1528922271.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:51.742Z,1528922271.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:52.167Z,1528922272.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:52.568Z,1528922272.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:53.732Z,1528922273.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:53.875Z,1528922273.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:54.274Z,1528922274.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:54.675Z,1528922274.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:55.073Z,1528922275.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:55.470Z,1528922275.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:55.886Z,1528922275.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:56.269Z,1528922276.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:56.671Z,1528922276.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:57.075Z,1528922277.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:58.323Z,1528922278.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:58.479Z,1528922278.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:58.873Z,1528922278.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:59.274Z,1528922279.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:37:59.675Z,1528922279.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:00.072Z,1528922280.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:00.477Z,1528922280.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:00.885Z,1528922280.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:01.278Z,1528922281.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:02.474Z,1528922282.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:02.562Z,1528922282.562 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:38:02.609Z,1528922282.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:03.036Z,1528922283.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:03.431Z,1528922283.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:03.836Z,1528922283.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:04.216Z,1528922284.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:04.603Z,1528922284.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:05.040Z,1528922285.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:05.430Z,1528922285.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:05.830Z,1528922285.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:06.998Z,1528922286.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:07.148Z,1528922287.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:07.538Z,1528922287.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:07.937Z,1528922287.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:08.341Z,1528922288.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:08.733Z,1528922288.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:09.129Z,1528922289.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:09.536Z,1528922289.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:09.947Z,1528922289.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:10.342Z,1528922290.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:11.538Z,1528922291.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:11.691Z,1528922291.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:12.102Z,1528922292.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:12.489Z,1528922292.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:12.890Z,1528922292.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:13.283Z,1528922293.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:13.690Z,1528922293.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:14.098Z,1528922294.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:14.496Z,1528922294.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:15.663Z,1528922295.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:15.811Z,1528922295.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:16.252Z,1528922296.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:16.648Z,1528922296.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:17.048Z,1528922297.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:17.421Z,1528922297.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:17.826Z,1528922297.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:18.253Z,1528922298.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:18.648Z,1528922298.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:19.816Z,1528922299.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:19.961Z,1528922299.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:20.357Z,1528922300.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:20.756Z,1528922300.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:21.154Z,1528922301.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:21.561Z,1528922301.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:21.966Z,1528922301.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:22.332Z,1528922302.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:22.760Z,1528922302.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:23.924Z,1528922303.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:24.078Z,1528922304.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:24.464Z,1528922304.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:24.868Z,1528922304.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:25.266Z,1528922305.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:25.662Z,1528922305.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:26.062Z,1528922306.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:26.461Z,1528922306.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:26.868Z,1528922306.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:27.292Z,1528922307.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:27.676Z,1528922307.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:28.872Z,1528922308.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:29.016Z,1528922309.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:29.423Z,1528922309.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:29.828Z,1528922309.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:30.221Z,1528922310.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:30.623Z,1528922310.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:31.024Z,1528922311.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:31.420Z,1528922311.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:31.804Z,1528922311.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:32.244Z,1528922312.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:32.628Z,1528922312.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:33.856Z,1528922313.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:34.028Z,1528922314.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:34.430Z,1528922314.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:34.831Z,1528922314.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:35.233Z,1528922315.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:35.633Z,1528922315.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:36.012Z,1528922316.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:36.408Z,1528922316.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:36.833Z,1528922316.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:37.252Z,1528922317.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:37.635Z,1528922317.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:38.848Z,1528922318.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:39.001Z,1528922319.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:39.393Z,1528922319.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:39.808Z,1528922319.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:40.195Z,1528922320.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:40.592Z,1528922320.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:40.000Z,1528922321.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:41.391Z,1528922321.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:41.786Z,1528922321.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:42.208Z,1528922322.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:42.610Z,1528922322.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:43.851Z,1528922323.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:44.011Z,1528922324.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:44.405Z,1528922324.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:44.807Z,1528922324.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:45.206Z,1528922325.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:45.602Z,1528922325.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:46.009Z,1528922326.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:46.385Z,1528922326.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:46.785Z,1528922326.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:47.217Z,1528922327.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:47.608Z,1528922327.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:48.961Z,1528922328.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:49.110Z,1528922329.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:49.503Z,1528922329.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:49.927Z,1528922329.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:50.327Z,1528922330.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:50.704Z,1528922330.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:51.100Z,1528922331.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:51.499Z,1528922331.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:51.902Z,1528922331.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:52.332Z,1528922332.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:52.708Z,1528922332.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:54.080Z,1528922334.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:54.244Z,1528922334.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:54.656Z,1528922334.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:55.047Z,1528922335.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:55.450Z,1528922335.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:55.842Z,1528922335.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:56.221Z,1528922336.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:56.620Z,1528922336.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:57.060Z,1528922337.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:57.451Z,1528922337.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:58.662Z,1528922338.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:58.807Z,1528922338.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:59.228Z,1528922339.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:38:59.610Z,1528922339.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:00.016Z,1528922340.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:00.414Z,1528922340.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:00.802Z,1528922340.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:01.223Z,1528922341.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:01.620Z,1528922341.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:02.773Z,1528922342.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:02.858Z,1528922342.858 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:39:02.920Z,1528922342.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:03.324Z,1528922343.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:03.723Z,1528922343.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:04.119Z,1528922344.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:04.518Z,1528922344.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:04.898Z,1528922344.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:05.330Z,1528922345.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:05.732Z,1528922345.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:06.889Z,1528922346.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:07.048Z,1528922347.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:07.434Z,1528922347.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:07.838Z,1528922347.838 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:07.838Z,1528922347.838 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 343
2018-06-13T20:39:07.838Z,1528922347.838 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:39:07.840Z,1528922347.840 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:07.840Z,1528922347.840 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 343
2018-06-13T20:39:07.840Z,1528922347.840 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:39:07.842Z,1528922347.842 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:07.842Z,1528922347.842 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 343
2018-06-13T20:39:07.842Z,1528922347.842 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:39:07.933Z,1528922347.933 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:39:07.933Z,1528922347.933 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:39:07.934Z,1528922347.934 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:39:08.321Z,1528922348.321 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:39:08.321Z,1528922348.321 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 343
2018-06-13T20:39:08.321Z,1528922348.321 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:39:08.321Z,1528922348.321 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 343
2018-06-13T20:39:08.322Z,1528922348.322 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:39:08.322Z,1528922348.322 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 343
2018-06-13T20:39:08.643Z,1528922348.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:39:08.643Z,1528922348.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:39:08.644Z,1528922348.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:39:08.644Z,1528922348.644 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:39:08.645Z,1528922348.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:39:08.645Z,1528922348.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:39:08.645Z,1528922348.645 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:39:08.646Z,1528922348.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:39:08.646Z,1528922348.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:39:09.030Z,1528922349.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T20:39:09.031Z,1528922349.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:09.416Z,1528922349.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T20:39:09.418Z,1528922349.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:09.838Z,1528922349.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T20:39:09.839Z,1528922349.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:10.254Z,1528922350.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T20:39:10.255Z,1528922350.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:10.656Z,1528922350.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T20:39:10.657Z,1528922350.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:11.806Z,1528922351.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T20:39:11.807Z,1528922351.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:11.941Z,1528922351.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T20:39:11.942Z,1528922351.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:12.364Z,1528922352.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T20:39:12.365Z,1528922352.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:12.761Z,1528922352.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T20:39:12.762Z,1528922352.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:13.160Z,1528922353.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T20:39:13.161Z,1528922353.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:13.560Z,1528922353.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T20:39:13.561Z,1528922353.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:13.957Z,1528922353.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T20:39:13.958Z,1528922353.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:14.373Z,1528922354.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T20:39:14.374Z,1528922354.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:14.764Z,1528922354.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T20:39:14.764Z,1528922354.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:15.968Z,1528922355.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T20:39:15.969Z,1528922355.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:16.119Z,1528922356.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T20:39:16.120Z,1528922356.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:16.525Z,1528922356.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T20:39:16.526Z,1528922356.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:16.928Z,1528922356.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T20:39:16.930Z,1528922356.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:17.325Z,1528922357.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T20:39:17.326Z,1528922357.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:17.716Z,1528922357.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T20:39:17.716Z,1528922357.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:18.127Z,1528922358.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T20:39:18.128Z,1528922358.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:18.513Z,1528922358.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T20:39:18.514Z,1528922358.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:18.921Z,1528922358.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T20:39:18.922Z,1528922358.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:19.340Z,1528922359.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T20:39:19.341Z,1528922359.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:19.724Z,1528922359.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T20:39:19.726Z,1528922359.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:20.971Z,1528922360.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-06-13T20:39:20.972Z,1528922360.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:21.120Z,1528922361.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T20:39:21.120Z,1528922361.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:21.522Z,1528922361.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T20:39:21.523Z,1528922361.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:21.932Z,1528922361.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T20:39:21.937Z,1528922361.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:22.330Z,1528922362.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T20:39:22.331Z,1528922362.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:22.723Z,1528922362.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T20:39:22.724Z,1528922362.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:23.101Z,1528922363.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T20:39:23.102Z,1528922363.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:23.508Z,1528922363.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T20:39:23.525Z,1528922363.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:23.912Z,1528922363.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T20:39:23.929Z,1528922363.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:24.338Z,1528922364.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T20:39:24.339Z,1528922364.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:24.737Z,1528922364.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T20:39:24.738Z,1528922364.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:25.938Z,1528922365.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T20:39:25.939Z,1528922365.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:26.088Z,1528922366.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T20:39:26.089Z,1528922366.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:26.489Z,1528922366.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T20:39:26.490Z,1528922366.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:26.940Z,1528922366.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T20:39:26.969Z,1528922366.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:27.318Z,1528922367.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T20:39:27.319Z,1528922367.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:27.670Z,1528922367.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T20:39:27.671Z,1528922367.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:28.080Z,1528922368.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:28.475Z,1528922368.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:28.874Z,1528922368.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:29.299Z,1528922369.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:29.682Z,1528922369.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:31.210Z,1528922371.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:31.367Z,1528922371.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:31.765Z,1528922371.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:32.164Z,1528922372.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:32.562Z,1528922372.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:32.965Z,1528922372.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:33.360Z,1528922373.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:33.762Z,1528922373.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:34.177Z,1528922374.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:34.576Z,1528922374.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:35.771Z,1528922375.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:35.920Z,1528922375.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:36.327Z,1528922376.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:36.726Z,1528922376.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:37.123Z,1528922377.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:37.523Z,1528922377.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:37.931Z,1528922377.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:38.339Z,1528922378.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:38.728Z,1528922378.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:39.125Z,1528922379.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:40.318Z,1528922380.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:40.475Z,1528922380.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:40.822Z,1528922380.822 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T20:39:40.822Z,1528922380.822 [NAL9602] Data Fault, FailCount= 4
2018-06-13T20:39:40.823Z,1528922380.823 [NAL9602](ERROR): Data Fault
2018-06-13T20:39:40.877Z,1528922380.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:40.953Z,1528922380.953 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T20:39:41.218Z,1528922381.218 [NAL9602](INFO): Powering down
2018-06-13T20:39:41.256Z,1528922381.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:41.653Z,1528922381.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:42.074Z,1528922382.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:42.165Z,1528922382.165 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T20:39:42.165Z,1528922382.165 [NAL9602] No Fault, FailCount= 4
2018-06-13T20:39:42.456Z,1528922382.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:42.857Z,1528922382.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:43.260Z,1528922383.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:43.656Z,1528922383.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:44.056Z,1528922384.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:44.456Z,1528922384.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:44.852Z,1528922384.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:45.255Z,1528922385.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:45.664Z,1528922385.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:46.055Z,1528922386.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:46.454Z,1528922386.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:46.856Z,1528922386.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:47.255Z,1528922387.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:47.656Z,1528922387.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:48.060Z,1528922388.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:48.457Z,1528922388.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:48.854Z,1528922388.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:49.259Z,1528922389.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:49.655Z,1528922389.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:50.053Z,1528922390.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:50.455Z,1528922390.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:50.853Z,1528922390.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:51.253Z,1528922391.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:51.656Z,1528922391.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:52.060Z,1528922392.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:52.453Z,1528922392.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:52.859Z,1528922392.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:53.254Z,1528922393.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:53.658Z,1528922393.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:54.058Z,1528922394.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:54.457Z,1528922394.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:54.854Z,1528922394.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:55.259Z,1528922395.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:55.656Z,1528922395.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:56.054Z,1528922396.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:56.458Z,1528922396.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:56.856Z,1528922396.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:57.254Z,1528922397.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:57.657Z,1528922397.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:58.056Z,1528922398.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:58.455Z,1528922398.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:58.859Z,1528922398.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:59.257Z,1528922399.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:39:59.658Z,1528922399.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:00.059Z,1528922400.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:00.457Z,1528922400.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:00.854Z,1528922400.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:01.259Z,1528922401.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:01.689Z,1528922401.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:02.135Z,1528922402.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:02.525Z,1528922402.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:02.887Z,1528922402.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:03.212Z,1528922403.212 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:40:03.322Z,1528922403.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:03.681Z,1528922403.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:04.056Z,1528922404.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:04.456Z,1528922404.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:04.855Z,1528922404.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:05.342Z,1528922405.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:05.655Z,1528922405.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:06.055Z,1528922406.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:06.454Z,1528922406.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:06.851Z,1528922406.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:07.255Z,1528922407.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:07.654Z,1528922407.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:08.051Z,1528922408.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:08.455Z,1528922408.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:08.855Z,1528922408.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:09.251Z,1528922409.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:09.655Z,1528922409.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:10.055Z,1528922410.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:10.451Z,1528922410.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:10.855Z,1528922410.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:11.221Z,1528922411.221 [NAL9602](INFO): Powering up NAL9602
2018-06-13T20:40:11.260Z,1528922411.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:11.655Z,1528922411.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:12.056Z,1528922412.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:12.454Z,1528922412.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:12.860Z,1528922412.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:13.255Z,1528922413.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:13.655Z,1528922413.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:14.051Z,1528922414.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:14.455Z,1528922414.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:14.855Z,1528922414.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:15.251Z,1528922415.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:15.655Z,1528922415.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:16.055Z,1528922416.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:16.455Z,1528922416.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:16.856Z,1528922416.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:17.255Z,1528922417.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:17.655Z,1528922417.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:18.055Z,1528922418.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:18.455Z,1528922418.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:18.851Z,1528922418.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:19.255Z,1528922419.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:19.656Z,1528922419.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:20.053Z,1528922420.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:20.460Z,1528922420.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:20.855Z,1528922420.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:21.252Z,1528922421.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:21.657Z,1528922421.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:22.088Z,1528922422.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:22.423Z,1528922422.423 [NAL9602](INFO): NAL9602 initialized
2018-06-13T20:40:22.458Z,1528922422.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:22.856Z,1528922422.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:23.284Z,1528922423.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:23.688Z,1528922423.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:24.067Z,1528922424.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:24.456Z,1528922424.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:24.859Z,1528922424.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:25.271Z,1528922425.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:25.680Z,1528922425.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:26.101Z,1528922426.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:27.279Z,1528922427.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:27.464Z,1528922427.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:27.851Z,1528922427.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:28.264Z,1528922428.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:28.652Z,1528922428.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:29.054Z,1528922429.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:29.446Z,1528922429.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:29.862Z,1528922429.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:30.263Z,1528922430.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:31.428Z,1528922431.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:31.603Z,1528922431.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:32.012Z,1528922432.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:32.406Z,1528922432.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:32.804Z,1528922432.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:33.207Z,1528922433.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:33.584Z,1528922433.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:34.018Z,1528922434.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:34.383Z,1528922434.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:34.816Z,1528922434.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:35.193Z,1528922435.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:36.388Z,1528922436.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:36.542Z,1528922436.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:36.970Z,1528922436.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:37.370Z,1528922437.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:37.770Z,1528922437.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:38.148Z,1528922438.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:38.577Z,1528922438.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:38.943Z,1528922438.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:39.372Z,1528922439.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:40.529Z,1528922440.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:40.683Z,1528922440.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:41.082Z,1528922441.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:41.486Z,1528922441.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:41.883Z,1528922441.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:42.281Z,1528922442.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:42.684Z,1528922442.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:43.073Z,1528922443.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:43.482Z,1528922443.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:43.895Z,1528922443.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:44.287Z,1528922444.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:45.499Z,1528922445.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:45.655Z,1528922445.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:46.079Z,1528922446.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:46.492Z,1528922446.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:46.885Z,1528922446.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:47.281Z,1528922447.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:47.677Z,1528922447.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:48.060Z,1528922448.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:48.462Z,1528922448.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:48.886Z,1528922448.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:49.283Z,1528922449.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:50.492Z,1528922450.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:50.647Z,1528922450.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:51.047Z,1528922451.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:51.447Z,1528922451.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:51.846Z,1528922451.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:52.238Z,1528922452.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:52.639Z,1528922452.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:53.043Z,1528922453.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:53.442Z,1528922453.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:53.854Z,1528922453.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:54.253Z,1528922454.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:55.488Z,1528922455.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:55.651Z,1528922455.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:56.060Z,1528922456.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:56.467Z,1528922456.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:56.868Z,1528922456.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:57.244Z,1528922457.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:57.644Z,1528922457.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:58.048Z,1528922458.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:58.448Z,1528922458.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:58.856Z,1528922458.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:40:59.256Z,1528922459.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:00.472Z,1528922460.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:00.647Z,1528922460.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:01.045Z,1528922461.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:01.445Z,1528922461.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:01.846Z,1528922461.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:02.244Z,1528922462.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:02.619Z,1528922462.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:03.028Z,1528922463.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:03.376Z,1528922463.376 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:41:03.428Z,1528922463.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:03.856Z,1528922463.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:04.252Z,1528922464.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:05.476Z,1528922465.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:05.633Z,1528922465.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:06.066Z,1528922466.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:06.463Z,1528922466.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:06.863Z,1528922466.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:07.234Z,1528922467.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:07.641Z,1528922467.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:08.034Z,1528922468.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:08.439Z,1528922468.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:08.867Z,1528922468.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:09.268Z,1528922469.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:10.480Z,1528922470.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:10.629Z,1528922470.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:11.023Z,1528922471.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:11.423Z,1528922471.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:11.821Z,1528922471.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:12.256Z,1528922472.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:12.631Z,1528922472.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:12.996Z,1528922472.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:13.428Z,1528922473.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:14.624Z,1528922474.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:14.779Z,1528922474.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:15.173Z,1528922475.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:15.576Z,1528922475.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:15.978Z,1528922475.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:16.371Z,1528922476.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:16.770Z,1528922476.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:17.166Z,1528922477.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:17.576Z,1528922477.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:17.992Z,1528922477.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:18.386Z,1528922478.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:19.555Z,1528922479.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:19.718Z,1528922479.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:20.135Z,1528922480.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:20.541Z,1528922480.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:20.943Z,1528922480.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:21.332Z,1528922481.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:21.733Z,1528922481.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:22.114Z,1528922482.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:22.517Z,1528922482.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:22.950Z,1528922482.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:23.340Z,1528922483.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:24.541Z,1528922484.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:24.701Z,1528922484.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:25.098Z,1528922485.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:25.499Z,1528922485.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:25.894Z,1528922485.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:26.294Z,1528922486.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:26.697Z,1528922486.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:27.082Z,1528922487.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:27.495Z,1528922487.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:27.913Z,1528922487.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:28.303Z,1528922488.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:29.496Z,1528922489.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:29.649Z,1528922489.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:30.051Z,1528922490.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:30.449Z,1528922490.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:30.846Z,1528922490.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:31.246Z,1528922491.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:31.653Z,1528922491.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:32.034Z,1528922492.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:32.452Z,1528922492.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:33.611Z,1528922493.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:33.741Z,1528922493.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:34.153Z,1528922494.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:34.558Z,1528922494.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:34.956Z,1528922494.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:35.356Z,1528922495.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:35.748Z,1528922495.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:36.132Z,1528922496.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:36.553Z,1528922496.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:36.964Z,1528922496.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:37.359Z,1528922497.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:38.535Z,1528922498.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:38.711Z,1528922498.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:39.104Z,1528922499.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:39.507Z,1528922499.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:39.906Z,1528922499.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:40.308Z,1528922500.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:40.710Z,1528922500.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:41.084Z,1528922501.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:41.500Z,1528922501.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:41.916Z,1528922501.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:42.311Z,1528922502.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:43.483Z,1528922503.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:43.628Z,1528922503.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:44.033Z,1528922504.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:44.426Z,1528922504.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:44.826Z,1528922504.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:45.217Z,1528922505.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:45.633Z,1528922505.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:46.024Z,1528922506.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:46.423Z,1528922506.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:46.830Z,1528922506.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:48.039Z,1528922508.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:48.193Z,1528922508.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:48.619Z,1528922508.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:49.016Z,1528922509.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:49.415Z,1528922509.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:49.796Z,1528922509.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:50.217Z,1528922510.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:50.593Z,1528922510.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:51.032Z,1528922511.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:51.426Z,1528922511.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:52.635Z,1528922512.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:52.776Z,1528922512.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:53.177Z,1528922513.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:53.577Z,1528922513.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:53.981Z,1528922513.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:54.373Z,1528922514.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:54.768Z,1528922514.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:55.181Z,1528922515.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:55.577Z,1528922515.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:55.990Z,1528922515.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:56.392Z,1528922516.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:57.604Z,1528922517.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:57.762Z,1528922517.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:58.188Z,1528922518.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:58.570Z,1528922518.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:58.976Z,1528922518.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:59.365Z,1528922519.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:41:59.768Z,1528922519.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:00.163Z,1528922520.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:00.567Z,1528922520.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:00.992Z,1528922520.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:01.373Z,1528922521.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:02.617Z,1528922522.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:02.763Z,1528922522.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:03.161Z,1528922523.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:03.568Z,1528922523.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:03.900Z,1528922523.900 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:42:03.964Z,1528922523.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:04.358Z,1528922524.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:04.765Z,1528922524.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:05.149Z,1528922525.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:05.558Z,1528922525.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:05.973Z,1528922525.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:06.363Z,1528922526.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:07.575Z,1528922527.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:07.751Z,1528922527.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:08.156Z,1528922528.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:08.564Z,1528922528.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:08.955Z,1528922528.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:08.955Z,1528922528.955 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 344
2018-06-13T20:42:08.955Z,1528922528.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:42:08.961Z,1528922528.961 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:08.961Z,1528922528.961 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 344
2018-06-13T20:42:08.961Z,1528922528.961 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:42:08.963Z,1528922528.963 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:08.963Z,1528922528.963 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 344
2018-06-13T20:42:08.963Z,1528922528.963 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:42:09.049Z,1528922529.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:42:09.049Z,1528922529.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:42:09.049Z,1528922529.049 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:42:09.405Z,1528922529.405 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:42:09.405Z,1528922529.405 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 344
2018-06-13T20:42:09.406Z,1528922529.406 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:42:09.406Z,1528922529.406 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 344
2018-06-13T20:42:09.406Z,1528922529.406 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:42:09.406Z,1528922529.406 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 344
2018-06-13T20:42:09.734Z,1528922529.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:42:09.735Z,1528922529.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:42:09.735Z,1528922529.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:42:09.735Z,1528922529.735 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:42:09.736Z,1528922529.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:42:09.736Z,1528922529.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:42:09.736Z,1528922529.736 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:42:09.741Z,1528922529.741 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:42:09.741Z,1528922529.741 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:42:10.135Z,1528922530.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T20:42:10.136Z,1528922530.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:10.541Z,1528922530.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T20:42:10.542Z,1528922530.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:10.948Z,1528922530.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T20:42:10.948Z,1528922530.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:11.339Z,1528922531.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T20:42:11.340Z,1528922531.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:12.577Z,1528922532.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T20:42:12.578Z,1528922532.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:12.732Z,1528922532.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T20:42:12.734Z,1528922532.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:13.129Z,1528922533.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T20:42:13.130Z,1528922533.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:13.536Z,1528922533.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T20:42:13.537Z,1528922533.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:13.930Z,1528922533.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T20:42:13.931Z,1528922533.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:14.325Z,1528922534.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T20:42:14.326Z,1528922534.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:14.728Z,1528922534.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T20:42:14.729Z,1528922534.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:15.104Z,1528922535.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T20:42:15.105Z,1528922535.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:15.512Z,1528922535.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T20:42:15.533Z,1528922535.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:15.942Z,1528922535.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T20:42:15.943Z,1528922535.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:16.338Z,1528922536.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T20:42:16.338Z,1528922536.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:17.549Z,1528922537.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T20:42:17.550Z,1528922537.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:17.703Z,1528922537.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T20:42:17.704Z,1528922537.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:18.090Z,1528922538.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T20:42:18.091Z,1528922538.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:18.508Z,1528922538.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T20:42:18.509Z,1528922538.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:18.902Z,1528922538.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T20:42:18.903Z,1528922538.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:19.277Z,1528922539.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T20:42:19.278Z,1528922539.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:19.707Z,1528922539.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T20:42:19.708Z,1528922539.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:20.076Z,1528922540.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T20:42:20.077Z,1528922540.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:20.499Z,1528922540.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T20:42:20.500Z,1528922540.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:21.669Z,1528922541.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-06-13T20:42:21.670Z,1528922541.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:21.803Z,1528922541.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T20:42:21.804Z,1528922541.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:22.220Z,1528922542.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T20:42:22.221Z,1528922542.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:22.624Z,1528922542.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T20:42:22.625Z,1528922542.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:23.018Z,1528922543.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T20:42:23.019Z,1528922543.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:23.396Z,1528922543.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T20:42:23.409Z,1528922543.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:23.796Z,1528922543.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T20:42:23.798Z,1528922543.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:24.195Z,1528922544.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T20:42:24.196Z,1528922544.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:24.599Z,1528922544.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T20:42:24.600Z,1528922544.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:25.030Z,1528922545.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T20:42:25.031Z,1528922545.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:25.425Z,1528922545.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T20:42:25.426Z,1528922545.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:26.635Z,1528922546.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T20:42:26.636Z,1528922546.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:26.783Z,1528922546.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T20:42:26.784Z,1528922546.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:27.180Z,1528922547.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T20:42:27.181Z,1528922547.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:27.587Z,1528922547.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T20:42:27.588Z,1528922547.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:27.981Z,1528922547.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T20:42:27.982Z,1528922547.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:28.373Z,1528922548.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T20:42:28.374Z,1528922548.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:28.773Z,1528922548.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T20:42:28.774Z,1528922548.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:29.174Z,1528922549.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:29.574Z,1528922549.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:29.996Z,1528922549.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:30.381Z,1528922550.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:31.574Z,1528922551.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:31.735Z,1528922551.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:32.136Z,1528922552.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:32.540Z,1528922552.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:32.930Z,1528922552.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:33.331Z,1528922553.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:33.749Z,1528922553.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:34.133Z,1528922554.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:34.540Z,1528922554.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:35.719Z,1528922555.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:35.879Z,1528922555.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:36.294Z,1528922556.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:36.697Z,1528922556.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:37.098Z,1528922557.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:37.494Z,1528922557.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:37.896Z,1528922557.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:38.293Z,1528922558.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:38.690Z,1528922558.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:39.110Z,1528922559.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:39.511Z,1528922559.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:40.720Z,1528922560.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:40.863Z,1528922560.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:41.264Z,1528922561.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:41.666Z,1528922561.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:42.065Z,1528922562.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:42.456Z,1528922562.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:42.860Z,1528922562.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:43.253Z,1528922563.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:43.655Z,1528922563.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:44.071Z,1528922564.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:44.468Z,1528922564.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:45.683Z,1528922565.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:45.843Z,1528922565.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:46.261Z,1528922566.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:46.662Z,1528922566.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:47.063Z,1528922567.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:47.457Z,1528922567.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:47.860Z,1528922567.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:48.238Z,1528922568.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:48.662Z,1528922568.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:49.077Z,1528922569.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:49.469Z,1528922569.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:50.719Z,1528922570.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:50.879Z,1528922570.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:51.276Z,1528922571.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:51.676Z,1528922571.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:52.073Z,1528922572.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:52.448Z,1528922572.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:52.875Z,1528922572.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:53.270Z,1528922573.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:53.653Z,1528922573.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:54.084Z,1528922574.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:54.476Z,1528922574.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:55.688Z,1528922575.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:55.834Z,1528922575.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:56.239Z,1528922576.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:56.640Z,1528922576.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:57.043Z,1528922577.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:57.432Z,1528922577.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:57.832Z,1528922577.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:58.248Z,1528922578.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:58.644Z,1528922578.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:59.045Z,1528922579.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:42:59.439Z,1528922579.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:00.685Z,1528922580.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:00.835Z,1528922580.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:01.240Z,1528922581.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:01.629Z,1528922581.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:02.024Z,1528922582.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:02.415Z,1528922582.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:02.815Z,1528922582.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:03.215Z,1528922583.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:03.624Z,1528922583.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:04.046Z,1528922584.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:04.372Z,1528922584.372 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:43:04.439Z,1528922584.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:05.810Z,1528922585.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:05.953Z,1528922585.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:06.351Z,1528922586.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:06.757Z,1528922586.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:07.156Z,1528922587.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:07.554Z,1528922587.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:07.951Z,1528922587.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:08.349Z,1528922588.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:08.760Z,1528922588.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:09.168Z,1528922589.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:10.356Z,1528922590.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:10.508Z,1528922590.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:10.906Z,1528922590.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:11.306Z,1528922591.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:11.709Z,1528922591.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:12.101Z,1528922592.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:12.505Z,1528922592.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:12.916Z,1528922592.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:13.316Z,1528922593.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:14.479Z,1528922594.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:14.663Z,1528922594.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:15.054Z,1528922595.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:15.457Z,1528922595.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:15.861Z,1528922595.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:16.226Z,1528922596.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:16.626Z,1528922596.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:17.064Z,1528922597.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:17.461Z,1528922597.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:18.613Z,1528922598.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:18.762Z,1528922598.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:19.167Z,1528922599.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:19.562Z,1528922599.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:19.961Z,1528922599.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:20.361Z,1528922600.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:20.738Z,1528922600.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:21.172Z,1528922601.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:21.565Z,1528922601.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:22.732Z,1528922602.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:22.866Z,1528922602.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:23.274Z,1528922603.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:23.675Z,1528922603.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:24.073Z,1528922604.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:24.460Z,1528922604.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:24.869Z,1528922604.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:25.269Z,1528922605.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:25.652Z,1528922605.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:26.092Z,1528922606.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:26.476Z,1528922606.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:27.643Z,1528922607.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:27.787Z,1528922607.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:28.184Z,1528922608.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:28.590Z,1528922608.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:28.986Z,1528922608.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:29.377Z,1528922609.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:29.793Z,1528922609.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:30.173Z,1528922610.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:30.593Z,1528922610.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:31.744Z,1528922611.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:31.895Z,1528922611.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:32.291Z,1528922612.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:32.690Z,1528922612.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:33.090Z,1528922613.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:33.491Z,1528922613.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:33.886Z,1528922613.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:34.289Z,1528922614.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:34.671Z,1528922614.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:35.112Z,1528922615.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:35.497Z,1528922615.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:36.749Z,1528922616.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:36.912Z,1528922616.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:37.305Z,1528922617.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:37.706Z,1528922617.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:38.104Z,1528922618.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:38.504Z,1528922618.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:38.902Z,1528922618.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:39.302Z,1528922619.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:39.706Z,1528922619.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:40.119Z,1528922620.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:40.513Z,1528922620.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:41.688Z,1528922621.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:41.864Z,1528922621.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:42.257Z,1528922622.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:42.664Z,1528922622.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:43.061Z,1528922623.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:43.437Z,1528922623.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:43.869Z,1528922623.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:44.238Z,1528922624.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:44.663Z,1528922624.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:45.878Z,1528922625.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:46.022Z,1528922626.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:46.421Z,1528922626.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:46.824Z,1528922626.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:47.222Z,1528922627.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:47.617Z,1528922627.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:48.019Z,1528922628.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:48.417Z,1528922628.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:48.840Z,1528922628.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:49.232Z,1528922629.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:50.433Z,1528922630.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:50.589Z,1528922630.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:50.982Z,1528922630.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:51.377Z,1528922631.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:51.789Z,1528922631.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:52.180Z,1528922632.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:52.579Z,1528922632.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:53.000Z,1528922633.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:53.385Z,1528922633.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:54.572Z,1528922634.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:54.732Z,1528922634.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:55.148Z,1528922635.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:55.532Z,1528922635.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:55.936Z,1528922635.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:56.327Z,1528922636.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:56.733Z,1528922636.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.401825 seconds old.
2018-06-13T20:43:56.734Z,1528922636.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:56.735Z,1528922636.735 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.406422 seconds old.
2018-06-13T20:43:56.736Z,1528922636.736 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.406568 seconds old.
2018-06-13T20:43:57.136Z,1528922637.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.808942 seconds old.
2018-06-13T20:43:57.137Z,1528922637.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:57.138Z,1528922637.138 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.809525 seconds old.
2018-06-13T20:43:57.139Z,1528922637.139 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.809657 seconds old.
2018-06-13T20:43:57.546Z,1528922637.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.219445 seconds old.
2018-06-13T20:43:57.547Z,1528922637.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:57.548Z,1528922637.548 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.219769 seconds old.
2018-06-13T20:43:57.549Z,1528922637.549 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.220088 seconds old.
2018-06-13T20:43:58.699Z,1528922638.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.372266 seconds old.
2018-06-13T20:43:58.700Z,1528922638.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:58.701Z,1528922638.701 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.372818 seconds old.
2018-06-13T20:43:58.702Z,1528922638.702 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.372980 seconds old.
2018-06-13T20:43:58.879Z,1528922638.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.551915 seconds old.
2018-06-13T20:43:58.880Z,1528922638.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:58.881Z,1528922638.881 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.552252 seconds old.
2018-06-13T20:43:58.882Z,1528922638.882 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.552619 seconds old.
2018-06-13T20:43:59.285Z,1528922639.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:43:59.677Z,1528922639.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:00.076Z,1528922640.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:00.456Z,1528922640.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:00.880Z,1528922640.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:01.251Z,1528922641.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:01.695Z,1528922641.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:02.847Z,1528922642.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:03.004Z,1528922643.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:03.405Z,1528922643.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:03.798Z,1528922643.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:04.197Z,1528922644.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:04.536Z,1528922644.536 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:44:04.599Z,1528922644.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:04.985Z,1528922644.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:05.384Z,1528922645.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:05.785Z,1528922645.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:06.201Z,1528922646.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:06.598Z,1528922646.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:07.803Z,1528922647.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:07.959Z,1528922647.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:08.398Z,1528922648.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:08.791Z,1528922648.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:09.194Z,1528922649.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:09.588Z,1528922649.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:09.964Z,1528922649.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:10.367Z,1528922650.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:10.771Z,1528922650.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:11.208Z,1528922651.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:11.602Z,1528922651.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:12.817Z,1528922652.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:12.960Z,1528922652.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:13.361Z,1528922653.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:13.761Z,1528922653.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:14.159Z,1528922654.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:14.548Z,1528922654.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:14.950Z,1528922654.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:15.349Z,1528922655.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:15.756Z,1528922655.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:16.167Z,1528922656.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:16.558Z,1528922656.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:17.804Z,1528922657.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:17.946Z,1528922657.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:18.360Z,1528922658.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:18.766Z,1528922658.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:19.162Z,1528922659.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:19.560Z,1528922659.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:19.963Z,1528922659.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:20.340Z,1528922660.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:20.740Z,1528922660.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:21.166Z,1528922661.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:21.572Z,1528922661.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:22.787Z,1528922662.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:22.969Z,1528922662.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:23.372Z,1528922663.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:23.770Z,1528922663.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:24.168Z,1528922664.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:24.567Z,1528922664.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:24.968Z,1528922664.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:25.362Z,1528922665.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:25.768Z,1528922665.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:26.176Z,1528922666.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:26.575Z,1528922666.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:27.796Z,1528922667.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:27.980Z,1528922667.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:28.378Z,1528922668.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:28.784Z,1528922668.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:29.180Z,1528922669.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:29.580Z,1528922669.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:29.968Z,1528922669.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:30.374Z,1528922670.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:30.760Z,1528922670.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:31.190Z,1528922671.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:31.584Z,1528922671.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:32.808Z,1528922672.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:32.992Z,1528922672.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:33.392Z,1528922673.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:33.789Z,1528922673.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:34.188Z,1528922674.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:34.585Z,1528922674.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:34.987Z,1528922674.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:35.364Z,1528922675.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:35.785Z,1528922675.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:36.198Z,1528922676.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:36.595Z,1528922676.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:37.823Z,1528922677.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:37.995Z,1528922677.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:38.398Z,1528922678.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:38.796Z,1528922678.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:39.202Z,1528922679.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:39.599Z,1528922679.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:39.000Z,1528922680.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:40.371Z,1528922680.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:40.803Z,1528922680.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:41.203Z,1528922681.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:41.603Z,1528922681.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:42.804Z,1528922682.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:42.942Z,1528922682.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:43.349Z,1528922683.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:43.750Z,1528922683.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:44.150Z,1528922684.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:44.545Z,1528922684.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:44.961Z,1528922684.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:45.345Z,1528922685.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:45.760Z,1528922685.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:46.915Z,1528922686.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:47.060Z,1528922687.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:47.459Z,1528922687.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:47.868Z,1528922687.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:48.264Z,1528922688.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:48.654Z,1528922688.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:49.060Z,1528922689.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:49.441Z,1528922689.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:49.861Z,1528922689.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:50.274Z,1528922690.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:50.661Z,1528922690.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:51.857Z,1528922691.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:52.023Z,1528922692.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:52.418Z,1528922692.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:52.820Z,1528922692.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:53.216Z,1528922693.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:53.623Z,1528922693.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:54.017Z,1528922694.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:54.413Z,1528922694.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:54.800Z,1528922694.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:55.230Z,1528922695.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:55.623Z,1528922695.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:56.831Z,1528922696.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:56.989Z,1528922696.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:57.392Z,1528922697.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:57.790Z,1528922697.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:58.190Z,1528922698.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:58.581Z,1528922698.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:58.988Z,1528922698.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:59.383Z,1528922699.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:44:59.782Z,1528922699.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:00.199Z,1528922700.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:00.591Z,1528922700.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:01.784Z,1528922701.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:01.947Z,1528922701.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:02.344Z,1528922702.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:02.742Z,1528922702.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:03.143Z,1528922703.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:03.536Z,1528922703.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:03.960Z,1528922703.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:04.344Z,1528922704.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:04.680Z,1528922704.680 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:45:04.756Z,1528922704.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:05.916Z,1528922705.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:06.068Z,1528922706.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:06.492Z,1528922706.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:06.891Z,1528922706.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:07.291Z,1528922707.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:07.671Z,1528922707.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:08.071Z,1528922708.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:08.468Z,1528922708.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:08.896Z,1528922708.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:09.303Z,1528922709.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:09.706Z,1528922709.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:10.868Z,1528922710.868 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:10.868Z,1528922710.868 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 345
2018-06-13T20:45:10.868Z,1528922710.868 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:45:10.870Z,1528922710.870 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:10.870Z,1528922710.870 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 345
2018-06-13T20:45:10.870Z,1528922710.870 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:45:10.872Z,1528922710.872 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:10.872Z,1528922710.872 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 345
2018-06-13T20:45:10.872Z,1528922710.872 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:45:10.945Z,1528922710.945 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:45:10.945Z,1528922710.945 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:45:10.945Z,1528922710.945 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:45:11.101Z,1528922711.101 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:45:11.101Z,1528922711.101 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 345
2018-06-13T20:45:11.102Z,1528922711.102 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:45:11.102Z,1528922711.102 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 345
2018-06-13T20:45:11.102Z,1528922711.102 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:45:11.102Z,1528922711.102 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 345
2018-06-13T20:45:11.411Z,1528922711.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:45:11.411Z,1528922711.411 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:45:11.412Z,1528922711.412 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:45:11.412Z,1528922711.412 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:45:11.412Z,1528922711.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:45:11.413Z,1528922711.413 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:45:11.413Z,1528922711.413 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:45:11.414Z,1528922711.414 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:45:11.414Z,1528922711.414 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:45:11.826Z,1528922711.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T20:45:11.827Z,1528922711.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:12.218Z,1528922712.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T20:45:12.219Z,1528922712.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:12.596Z,1528922712.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T20:45:12.613Z,1528922712.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:12.996Z,1528922712.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T20:45:12.998Z,1528922712.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:13.391Z,1528922713.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T20:45:13.392Z,1528922713.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:13.800Z,1528922713.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T20:45:13.801Z,1528922713.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:14.229Z,1528922714.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T20:45:14.230Z,1528922714.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:14.623Z,1528922714.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T20:45:14.623Z,1528922714.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:15.799Z,1528922715.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T20:45:15.800Z,1528922715.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:15.980Z,1528922715.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-06-13T20:45:15.981Z,1528922715.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:16.381Z,1528922716.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T20:45:16.382Z,1528922716.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:16.786Z,1528922716.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T20:45:16.786Z,1528922716.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:17.182Z,1528922717.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T20:45:17.183Z,1528922717.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:17.577Z,1528922717.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T20:45:17.578Z,1528922717.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:17.993Z,1528922717.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T20:45:17.994Z,1528922717.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:18.356Z,1528922718.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T20:45:18.357Z,1528922718.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:18.782Z,1528922718.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T20:45:18.783Z,1528922718.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:20.003Z,1528922720.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T20:45:20.004Z,1528922720.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:20.155Z,1528922720.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T20:45:20.156Z,1528922720.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:20.563Z,1528922720.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T20:45:20.564Z,1528922720.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:20.962Z,1528922720.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T20:45:20.963Z,1528922720.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:21.362Z,1528922721.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T20:45:21.363Z,1528922721.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:21.760Z,1528922721.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T20:45:21.761Z,1528922721.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:22.152Z,1528922722.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T20:45:22.153Z,1528922722.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:22.554Z,1528922722.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T20:45:22.555Z,1528922722.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:22.986Z,1528922722.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T20:45:22.987Z,1528922722.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:23.367Z,1528922723.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T20:45:23.368Z,1528922723.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:24.570Z,1528922724.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T20:45:24.571Z,1528922724.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:24.747Z,1528922724.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T20:45:24.748Z,1528922724.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:25.148Z,1528922725.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-06-13T20:45:25.150Z,1528922725.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:25.546Z,1528922725.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T20:45:25.547Z,1528922725.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:25.950Z,1528922725.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-06-13T20:45:25.951Z,1528922725.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:26.318Z,1528922726.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T20:45:26.319Z,1528922726.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:26.719Z,1528922726.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T20:45:26.720Z,1528922726.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:27.156Z,1528922727.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-06-13T20:45:27.157Z,1528922727.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:27.529Z,1528922727.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-06-13T20:45:27.530Z,1528922727.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:28.703Z,1528922728.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T20:45:28.704Z,1528922728.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:28.859Z,1528922728.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T20:45:28.860Z,1528922728.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:29.264Z,1528922729.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T20:45:29.270Z,1528922729.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:29.664Z,1528922729.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T20:45:29.669Z,1528922729.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:30.069Z,1528922730.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T20:45:30.070Z,1528922730.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:30.470Z,1528922730.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T20:45:30.471Z,1528922730.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:30.837Z,1528922730.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T20:45:30.838Z,1528922730.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:31.265Z,1528922731.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:31.665Z,1528922731.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:32.819Z,1528922732.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:32.982Z,1528922732.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:33.377Z,1528922733.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:33.778Z,1528922733.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:34.182Z,1528922734.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:34.579Z,1528922734.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:34.993Z,1528922734.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:35.374Z,1528922735.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:35.785Z,1528922735.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:36.942Z,1528922736.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:37.100Z,1528922737.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:37.489Z,1528922737.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:37.885Z,1528922737.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:38.288Z,1528922738.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:38.679Z,1528922738.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:39.077Z,1528922739.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:39.477Z,1528922739.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:39.881Z,1528922739.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:40.295Z,1528922740.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:40.688Z,1528922740.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:41.972Z,1528922741.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:42.119Z,1528922742.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:42.536Z,1528922742.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:42.934Z,1528922742.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:43.335Z,1528922743.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:43.720Z,1528922743.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:44.112Z,1528922744.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:44.525Z,1528922744.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:44.934Z,1528922744.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:45.346Z,1528922745.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:45.743Z,1528922745.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:46.994Z,1528922746.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:47.155Z,1528922747.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:47.552Z,1528922747.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:47.956Z,1528922747.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:48.353Z,1528922748.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:48.748Z,1528922748.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:49.151Z,1528922749.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:49.548Z,1528922749.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:49.941Z,1528922749.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:50.362Z,1528922750.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:50.757Z,1528922750.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:51.961Z,1528922751.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:52.123Z,1528922752.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:52.528Z,1528922752.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:52.927Z,1528922752.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:53.323Z,1528922753.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:53.715Z,1528922753.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:54.118Z,1528922754.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:54.518Z,1528922754.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:54.920Z,1528922754.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:55.337Z,1528922755.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:55.726Z,1528922755.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:56.965Z,1528922756.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:57.125Z,1528922757.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:57.522Z,1528922757.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:57.922Z,1528922757.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:58.322Z,1528922758.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:58.719Z,1528922758.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:59.121Z,1528922759.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:59.515Z,1528922759.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:45:59.912Z,1528922759.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:00.330Z,1528922760.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:00.722Z,1528922760.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:03.364Z,1528922763.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:03.519Z,1528922763.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:03.918Z,1528922763.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:04.317Z,1528922764.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:04.719Z,1528922764.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:05.056Z,1528922765.056 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:46:05.109Z,1528922765.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:05.496Z,1528922765.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:05.897Z,1528922765.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:06.329Z,1528922766.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:06.733Z,1528922766.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:07.887Z,1528922767.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:08.059Z,1528922768.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:08.436Z,1528922768.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:08.835Z,1528922768.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:09.240Z,1528922769.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:09.633Z,1528922769.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:10.055Z,1528922770.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:10.431Z,1528922770.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:10.839Z,1528922770.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:12.070Z,1528922772.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:12.220Z,1528922772.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:12.625Z,1528922772.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:13.027Z,1528922773.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:13.419Z,1528922773.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:13.825Z,1528922773.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:14.201Z,1528922774.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:14.603Z,1528922774.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:15.020Z,1528922775.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:15.434Z,1528922775.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:15.830Z,1528922775.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:17.047Z,1528922777.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:17.192Z,1528922777.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:17.587Z,1528922777.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:17.996Z,1528922777.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:18.392Z,1528922778.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:18.791Z,1528922778.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:19.186Z,1528922779.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:19.590Z,1528922779.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:19.989Z,1528922779.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:20.404Z,1528922780.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:20.792Z,1528922780.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:22.035Z,1528922782.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:22.168Z,1528922782.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:22.604Z,1528922782.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:23.004Z,1528922783.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:23.404Z,1528922783.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:23.799Z,1528922783.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:24.173Z,1528922784.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:24.574Z,1528922784.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:24.980Z,1528922784.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:25.407Z,1528922785.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:25.808Z,1528922785.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:27.019Z,1528922787.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:27.154Z,1528922787.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:27.559Z,1528922787.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:27.962Z,1528922787.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:28.362Z,1528922788.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:28.757Z,1528922788.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:29.161Z,1528922789.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:29.561Z,1528922789.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:29.962Z,1528922789.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:30.369Z,1528922790.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:30.768Z,1528922790.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:32.018Z,1528922792.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:32.160Z,1528922792.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:32.571Z,1528922792.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:32.990Z,1528922792.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:33.370Z,1528922793.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:33.770Z,1528922793.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:34.172Z,1528922794.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:34.575Z,1528922794.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:34.974Z,1528922794.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:35.381Z,1528922795.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:35.779Z,1528922795.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:36.999Z,1528922796.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:37.175Z,1528922797.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:37.571Z,1528922797.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:37.984Z,1528922797.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:38.377Z,1528922798.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:38.777Z,1528922798.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:39.173Z,1528922799.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:39.557Z,1528922799.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:39.958Z,1528922799.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:40.384Z,1528922800.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:40.783Z,1528922800.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:42.077Z,1528922802.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:42.206Z,1528922802.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:42.636Z,1528922802.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:43.043Z,1528922803.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:43.439Z,1528922803.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:43.833Z,1528922803.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:44.217Z,1528922804.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:44.616Z,1528922804.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:45.018Z,1528922805.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:45.452Z,1528922805.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:45.834Z,1528922805.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:47.098Z,1528922807.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:47.259Z,1528922807.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:47.656Z,1528922807.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:48.061Z,1528922808.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:48.455Z,1528922808.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:48.853Z,1528922808.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:49.258Z,1528922809.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:49.634Z,1528922809.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:50.050Z,1528922810.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:50.466Z,1528922810.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:50.851Z,1528922810.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:52.083Z,1528922812.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:52.236Z,1528922812.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:52.643Z,1528922812.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:53.043Z,1528922813.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:53.439Z,1528922813.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:53.834Z,1528922813.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:54.238Z,1528922814.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:54.636Z,1528922814.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:55.040Z,1528922815.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:55.471Z,1528922815.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:55.865Z,1528922815.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:57.092Z,1528922817.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:57.265Z,1528922817.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:57.670Z,1528922817.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:58.072Z,1528922818.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:58.471Z,1528922818.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:58.843Z,1528922818.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:59.242Z,1528922819.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:46:59.645Z,1528922819.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:00.048Z,1528922820.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:00.476Z,1528922820.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:00.871Z,1528922820.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:02.092Z,1528922822.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:02.245Z,1528922822.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:02.642Z,1528922822.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:03.045Z,1528922823.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:03.441Z,1528922823.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:03.834Z,1528922823.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:04.234Z,1528922824.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:04.639Z,1528922824.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:05.038Z,1528922825.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:05.380Z,1528922825.380 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:47:05.472Z,1528922825.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:05.846Z,1528922825.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:07.081Z,1528922827.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:07.239Z,1528922827.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:07.637Z,1528922827.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:08.036Z,1528922828.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:08.434Z,1528922828.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:08.833Z,1528922828.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:09.233Z,1528922829.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:09.630Z,1528922829.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:10.029Z,1528922830.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:10.445Z,1528922830.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:10.838Z,1528922830.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:12.059Z,1528922832.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:12.219Z,1528922832.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:12.638Z,1528922832.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:13.048Z,1528922833.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:13.439Z,1528922833.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:13.834Z,1528922833.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:14.236Z,1528922834.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:14.643Z,1528922834.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:15.034Z,1528922835.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:15.446Z,1528922835.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:15.845Z,1528922835.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:17.345Z,1528922837.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:17.486Z,1528922837.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:17.892Z,1528922837.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:18.296Z,1528922838.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:18.685Z,1528922838.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:19.081Z,1528922839.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:19.487Z,1528922839.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:19.877Z,1528922839.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:20.296Z,1528922840.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:20.686Z,1528922840.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:21.860Z,1528922841.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:22.016Z,1528922842.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:22.403Z,1528922842.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:22.807Z,1528922842.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:23.206Z,1528922843.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:23.604Z,1528922843.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:24.004Z,1528922844.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:24.420Z,1528922844.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:24.794Z,1528922844.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:25.207Z,1528922845.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:26.395Z,1528922846.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:26.551Z,1528922846.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:26.948Z,1528922846.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:27.348Z,1528922847.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:27.750Z,1528922847.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:28.149Z,1528922848.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:28.544Z,1528922848.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:28.946Z,1528922848.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:29.361Z,1528922849.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:29.760Z,1528922849.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:30.906Z,1528922850.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:31.064Z,1528922851.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:31.458Z,1528922851.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:31.864Z,1528922851.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:32.264Z,1528922852.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:32.655Z,1528922852.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:33.068Z,1528922853.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:33.484Z,1528922853.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:33.868Z,1528922853.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:35.031Z,1528922855.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:35.170Z,1528922855.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:35.579Z,1528922855.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:35.976Z,1528922855.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:36.374Z,1528922856.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:36.776Z,1528922856.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:37.185Z,1528922857.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:37.584Z,1528922857.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:38.747Z,1528922858.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:38.931Z,1528922858.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:39.332Z,1528922859.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:39.730Z,1528922859.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:40.132Z,1528922860.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:40.514Z,1528922860.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:40.932Z,1528922860.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:41.338Z,1528922861.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:41.741Z,1528922861.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:42.889Z,1528922862.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:43.062Z,1528922863.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:43.485Z,1528922863.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:43.864Z,1528922863.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:44.263Z,1528922864.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:44.654Z,1528922864.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:45.084Z,1528922865.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:45.487Z,1528922865.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:45.863Z,1528922865.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:47.107Z,1528922867.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:47.256Z,1528922867.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:47.660Z,1528922867.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:48.055Z,1528922868.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:48.456Z,1528922868.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:48.847Z,1528922868.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:49.246Z,1528922869.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:49.643Z,1528922869.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:50.045Z,1528922870.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:50.459Z,1528922870.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:50.857Z,1528922870.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:52.085Z,1528922872.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:52.244Z,1528922872.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:52.652Z,1528922872.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:53.042Z,1528922873.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:53.443Z,1528922873.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:53.842Z,1528922873.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:54.262Z,1528922874.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:54.652Z,1528922874.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:55.047Z,1528922875.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:56.227Z,1528922876.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:56.374Z,1528922876.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:56.812Z,1528922876.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:57.217Z,1528922877.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:57.605Z,1528922877.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:58.002Z,1528922878.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:58.405Z,1528922878.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:58.798Z,1528922878.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:59.214Z,1528922879.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:47:59.610Z,1528922879.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:00.765Z,1528922880.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:00.912Z,1528922880.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:01.314Z,1528922881.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:01.711Z,1528922881.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:02.116Z,1528922882.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:02.504Z,1528922882.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:02.905Z,1528922882.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:03.320Z,1528922883.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:03.724Z,1528922883.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:04.863Z,1528922884.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:05.020Z,1528922885.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:05.412Z,1528922885.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:05.752Z,1528922885.752 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:48:05.822Z,1528922885.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:06.216Z,1528922886.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:06.615Z,1528922886.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:07.018Z,1528922887.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:07.422Z,1528922887.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:07.818Z,1528922887.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:08.976Z,1528922888.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:09.128Z,1528922889.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:09.523Z,1528922889.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:09.928Z,1528922889.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:10.328Z,1528922890.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:10.724Z,1528922890.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:11.120Z,1528922891.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:11.533Z,1528922891.533 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:11.533Z,1528922891.533 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 346
2018-06-13T20:48:11.533Z,1528922891.533 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:48:11.535Z,1528922891.535 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:11.535Z,1528922891.535 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 346
2018-06-13T20:48:11.535Z,1528922891.535 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:48:11.537Z,1528922891.537 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:11.537Z,1528922891.537 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 346
2018-06-13T20:48:11.537Z,1528922891.537 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:48:11.629Z,1528922891.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:48:11.629Z,1528922891.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:48:11.630Z,1528922891.630 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:48:12.009Z,1528922892.009 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:48:12.009Z,1528922892.009 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 346
2018-06-13T20:48:12.009Z,1528922892.009 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:48:12.009Z,1528922892.009 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 346
2018-06-13T20:48:12.010Z,1528922892.010 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:48:12.010Z,1528922892.010 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 346
2018-06-13T20:48:13.099Z,1528922893.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:48:13.099Z,1528922893.099 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:48:13.099Z,1528922893.099 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:48:13.100Z,1528922893.100 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:48:13.100Z,1528922893.100 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:48:13.100Z,1528922893.100 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:48:13.121Z,1528922893.121 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:48:13.122Z,1528922893.122 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:48:13.122Z,1528922893.122 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:48:13.278Z,1528922893.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T20:48:13.279Z,1528922893.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:13.677Z,1528922893.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T20:48:13.678Z,1528922893.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:14.077Z,1528922894.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T20:48:14.078Z,1528922894.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:14.484Z,1528922894.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T20:48:14.485Z,1528922894.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:14.876Z,1528922894.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T20:48:14.881Z,1528922894.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:15.252Z,1528922895.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T20:48:15.253Z,1528922895.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:15.660Z,1528922895.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T20:48:15.681Z,1528922895.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:16.058Z,1528922896.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T20:48:16.059Z,1528922896.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:16.486Z,1528922896.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T20:48:16.487Z,1528922896.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:16.889Z,1528922896.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T20:48:16.890Z,1528922896.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:18.049Z,1528922898.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T20:48:18.050Z,1528922898.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:18.199Z,1528922898.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T20:48:18.200Z,1528922898.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:18.603Z,1528922898.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T20:48:18.604Z,1528922898.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:19.004Z,1528922899.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T20:48:19.006Z,1528922899.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:19.403Z,1528922899.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T20:48:19.404Z,1528922899.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:19.788Z,1528922899.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T20:48:19.789Z,1528922899.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:20.190Z,1528922900.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T20:48:20.191Z,1528922900.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:20.609Z,1528922900.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T20:48:20.610Z,1528922900.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:21.002Z,1528922901.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T20:48:21.003Z,1528922901.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:22.202Z,1528922902.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T20:48:22.203Z,1528922902.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:22.351Z,1528922902.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T20:48:22.352Z,1528922902.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:22.764Z,1528922902.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T20:48:22.765Z,1528922902.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:23.149Z,1528922903.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T20:48:23.150Z,1528922903.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:23.548Z,1528922903.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T20:48:23.549Z,1528922903.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:23.941Z,1528922903.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T20:48:23.942Z,1528922903.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:24.347Z,1528922904.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T20:48:24.348Z,1528922904.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:24.739Z,1528922904.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T20:48:24.740Z,1528922904.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:25.151Z,1528922905.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T20:48:25.152Z,1528922905.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:25.558Z,1528922905.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T20:48:25.559Z,1528922905.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:25.960Z,1528922905.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T20:48:25.961Z,1528922905.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:27.162Z,1528922907.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T20:48:27.163Z,1528922907.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:27.341Z,1528922907.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T20:48:27.342Z,1528922907.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:27.746Z,1528922907.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T20:48:27.747Z,1528922907.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:28.144Z,1528922908.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T20:48:28.145Z,1528922908.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:28.543Z,1528922908.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T20:48:28.544Z,1528922908.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:28.920Z,1528922908.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T20:48:28.921Z,1528922908.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:29.320Z,1528922909.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T20:48:29.321Z,1528922909.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:29.716Z,1528922909.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T20:48:29.716Z,1528922909.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:30.124Z,1528922910.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T20:48:30.125Z,1528922910.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:30.551Z,1528922910.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T20:48:30.552Z,1528922910.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:30.946Z,1528922910.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T20:48:30.947Z,1528922910.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:32.164Z,1528922912.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:32.323Z,1528922912.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:32.716Z,1528922912.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:33.106Z,1528922913.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:33.512Z,1528922913.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:33.906Z,1528922913.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:34.323Z,1528922914.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:34.681Z,1528922914.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:35.107Z,1528922915.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:36.288Z,1528922916.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:36.461Z,1528922916.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:36.862Z,1528922916.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:37.272Z,1528922917.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:37.672Z,1528922917.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:38.062Z,1528922918.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:38.460Z,1528922918.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:38.868Z,1528922918.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:39.273Z,1528922919.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:39.676Z,1528922919.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:40.847Z,1528922920.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:41.020Z,1528922921.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:41.422Z,1528922921.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:41.819Z,1528922921.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:42.223Z,1528922922.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:42.625Z,1528922922.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:42.995Z,1528922922.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:43.426Z,1528922923.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:43.826Z,1528922923.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:45.051Z,1528922925.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:45.201Z,1528922925.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:45.637Z,1528922925.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:46.031Z,1528922926.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:46.426Z,1528922926.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:46.801Z,1528922926.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:47.196Z,1528922927.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:47.640Z,1528922927.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:48.030Z,1528922928.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:49.190Z,1528922929.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:49.331Z,1528922929.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:49.723Z,1528922929.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:50.123Z,1528922930.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:50.528Z,1528922930.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:50.915Z,1528922930.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:51.315Z,1528922931.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:51.715Z,1528922931.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:52.117Z,1528922932.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:52.547Z,1528922932.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:52.924Z,1528922932.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:54.113Z,1528922934.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:54.263Z,1528922934.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:54.657Z,1528922934.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:55.061Z,1528922935.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:55.460Z,1528922935.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:55.861Z,1528922935.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:56.262Z,1528922936.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:56.670Z,1528922936.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:57.068Z,1528922937.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:58.229Z,1528922938.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:58.381Z,1528922938.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:58.789Z,1528922938.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:59.188Z,1528922939.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:59.581Z,1528922939.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:48:59.970Z,1528922939.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:00.388Z,1528922940.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:00.769Z,1528922940.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:01.170Z,1528922941.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:01.589Z,1528922941.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:02.013Z,1528922942.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:03.174Z,1528922943.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:03.319Z,1528922943.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:03.724Z,1528922943.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:04.119Z,1528922944.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:04.520Z,1528922944.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:04.913Z,1528922944.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:05.332Z,1528922945.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:05.696Z,1528922945.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:06.124Z,1528922946.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:06.458Z,1528922946.458 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:49:07.288Z,1528922947.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:07.427Z,1528922947.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:07.840Z,1528922947.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:08.240Z,1528922948.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:08.632Z,1528922948.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:09.035Z,1528922949.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:09.432Z,1528922949.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:09.814Z,1528922949.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:10.218Z,1528922950.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:10.645Z,1528922950.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:11.038Z,1528922951.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:12.246Z,1528922952.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:12.407Z,1528922952.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:12.807Z,1528922952.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:13.224Z,1528922953.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:13.624Z,1528922953.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:14.000Z,1528922954.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:14.400Z,1528922954.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:14.802Z,1528922954.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:15.205Z,1528922955.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:15.618Z,1528922955.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:16.006Z,1528922956.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:17.203Z,1528922957.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:17.352Z,1528922957.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:17.750Z,1528922957.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:18.154Z,1528922958.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:18.556Z,1528922958.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:18.952Z,1528922958.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:19.358Z,1528922959.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:19.728Z,1528922959.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:20.151Z,1528922960.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:21.369Z,1528922961.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:21.511Z,1528922961.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:21.913Z,1528922961.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:22.312Z,1528922962.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:22.711Z,1528922962.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:23.100Z,1528922963.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:23.501Z,1528922963.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:23.905Z,1528922963.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:24.310Z,1528922964.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:24.720Z,1528922964.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:25.110Z,1528922965.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:26.355Z,1528922966.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:26.477Z,1528922966.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:26.907Z,1528922966.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:27.304Z,1528922967.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:27.704Z,1528922967.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:28.081Z,1528922968.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:28.482Z,1528922968.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:28.876Z,1528922968.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:29.282Z,1528922969.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:29.709Z,1528922969.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:30.095Z,1528922970.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:31.325Z,1528922971.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:31.467Z,1528922971.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:31.865Z,1528922971.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:32.270Z,1528922972.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:32.667Z,1528922972.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:33.063Z,1528922973.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:33.460Z,1528922973.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:33.859Z,1528922973.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:34.256Z,1528922974.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:34.673Z,1528922974.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:35.063Z,1528922975.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:36.269Z,1528922976.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:36.423Z,1528922976.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:36.822Z,1528922976.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:37.234Z,1528922977.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:37.618Z,1528922977.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:38.017Z,1528922978.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:38.419Z,1528922978.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:38.796Z,1528922978.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:39.217Z,1528922979.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:39.635Z,1528922979.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:40.026Z,1528922980.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:41.234Z,1528922981.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:41.403Z,1528922981.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:41.871Z,1528922981.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:42.313Z,1528922982.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:42.620Z,1528922982.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:43.117Z,1528922983.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:43.583Z,1528922983.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:43.805Z,1528922983.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:44.206Z,1528922984.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:44.628Z,1528922984.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:45.015Z,1528922985.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:46.200Z,1528922986.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:46.380Z,1528922986.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:46.773Z,1528922986.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:47.174Z,1528922987.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:47.575Z,1528922987.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:47.978Z,1528922987.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:48.383Z,1528922988.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:48.756Z,1528922988.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:49.185Z,1528922989.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:50.346Z,1528922990.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:50.482Z,1528922990.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:50.893Z,1528922990.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:51.300Z,1528922991.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:51.700Z,1528922991.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:52.084Z,1528922992.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:52.498Z,1528922992.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:52.889Z,1528922992.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:53.299Z,1528922993.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:53.702Z,1528922993.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:54.104Z,1528922994.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:55.294Z,1528922995.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:55.450Z,1528922995.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:55.860Z,1528922995.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:56.256Z,1528922996.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:56.652Z,1528922996.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:57.045Z,1528922997.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:57.428Z,1528922997.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:57.829Z,1528922997.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:58.246Z,1528922998.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:58.664Z,1528922998.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:49:59.055Z,1528922999.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:00.229Z,1528923000.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:00.375Z,1528923000.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:00.774Z,1528923000.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:01.180Z,1528923001.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:01.575Z,1528923001.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:01.970Z,1528923001.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:02.369Z,1528923002.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:02.787Z,1528923002.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:03.174Z,1528923003.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:04.375Z,1528923004.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:04.518Z,1528923004.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:04.927Z,1528923004.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:05.330Z,1528923005.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:05.725Z,1528923005.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:06.115Z,1528923006.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:06.531Z,1528923006.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:06.870Z,1528923006.870 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:50:06.909Z,1528923006.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:07.309Z,1528923007.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:07.744Z,1528923007.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:08.131Z,1528923008.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:09.345Z,1528923009.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:09.499Z,1528923009.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:09.893Z,1528923009.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:10.294Z,1528923010.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:10.694Z,1528923010.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:11.090Z,1528923011.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:11.488Z,1528923011.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:11.889Z,1528923011.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:12.296Z,1528923012.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:12.706Z,1528923012.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:13.094Z,1528923013.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:14.279Z,1528923014.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:14.455Z,1528923014.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:14.847Z,1528923014.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:15.256Z,1528923015.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:15.657Z,1528923015.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:16.036Z,1528923016.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:16.463Z,1528923016.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:16.831Z,1528923016.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:17.259Z,1528923017.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:18.488Z,1528923018.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:18.667Z,1528923018.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:19.072Z,1528923019.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:19.470Z,1528923019.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:19.872Z,1528923019.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:20.248Z,1528923020.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:20.646Z,1528923020.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:21.044Z,1528923021.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:21.477Z,1528923021.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:21.884Z,1528923021.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:23.743Z,1528923023.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:23.904Z,1528923023.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:24.242Z,1528923024.242 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T20:50:24.242Z,1528923024.242 [NAL9602] Data Fault, FailCount= 5
2018-06-13T20:50:24.242Z,1528923024.242 [NAL9602](ERROR): Data Fault
2018-06-13T20:50:24.294Z,1528923024.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:24.373Z,1528923024.373 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T20:50:24.373Z,1528923024.373 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T20:50:24.642Z,1528923024.642 [NAL9602](INFO): Powering down
2018-06-13T20:50:24.705Z,1528923024.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:24.783Z,1528923024.783 [CBIT](INFO): Critical error at 20180613T205024
2018-06-13T20:50:25.081Z,1528923025.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:25.481Z,1528923025.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:25.876Z,1528923025.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:26.282Z,1528923026.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:26.676Z,1528923026.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:27.076Z,1528923027.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:27.481Z,1528923027.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:27.875Z,1528923027.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:28.275Z,1528923028.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:28.684Z,1528923028.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:29.079Z,1528923029.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:29.475Z,1528923029.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:29.879Z,1528923029.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:30.280Z,1528923030.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:30.684Z,1528923030.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:31.082Z,1528923031.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:31.481Z,1528923031.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:31.879Z,1528923031.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:32.282Z,1528923032.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:32.681Z,1528923032.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:33.079Z,1528923033.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:33.489Z,1528923033.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:33.881Z,1528923033.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:34.279Z,1528923034.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:34.682Z,1528923034.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:35.082Z,1528923035.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:35.479Z,1528923035.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:35.882Z,1528923035.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:36.280Z,1528923036.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:36.681Z,1528923036.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:37.084Z,1528923037.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:37.484Z,1528923037.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:37.883Z,1528923037.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:38.287Z,1528923038.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:38.684Z,1528923038.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:39.084Z,1528923039.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:39.487Z,1528923039.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:39.884Z,1528923039.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:40.283Z,1528923040.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:40.687Z,1528923040.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:41.084Z,1528923041.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:41.483Z,1528923041.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:41.888Z,1528923041.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:42.284Z,1528923042.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:42.683Z,1528923042.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:43.087Z,1528923043.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:43.484Z,1528923043.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:43.884Z,1528923043.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:44.287Z,1528923044.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:44.685Z,1528923044.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:45.087Z,1528923045.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:45.483Z,1528923045.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:45.884Z,1528923045.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:46.287Z,1528923046.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:46.688Z,1528923046.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:47.084Z,1528923047.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:47.487Z,1528923047.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:47.887Z,1528923047.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:48.284Z,1528923048.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:48.688Z,1528923048.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:49.089Z,1528923049.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:49.484Z,1528923049.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:49.883Z,1528923049.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:50.287Z,1528923050.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:50.685Z,1528923050.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:51.087Z,1528923051.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:51.487Z,1528923051.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:51.884Z,1528923051.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:52.287Z,1528923052.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:52.687Z,1528923052.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:53.084Z,1528923053.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:53.495Z,1528923053.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:53.887Z,1528923053.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:54.284Z,1528923054.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:54.687Z,1528923054.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:55.087Z,1528923055.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:55.485Z,1528923055.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:55.887Z,1528923055.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:56.287Z,1528923056.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:56.687Z,1528923056.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:57.237Z,1528923057.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:57.489Z,1528923057.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:57.886Z,1528923057.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:58.306Z,1528923058.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:58.689Z,1528923058.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:59.081Z,1528923059.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:59.480Z,1528923059.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:50:59.885Z,1528923059.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:00.281Z,1528923060.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:00.685Z,1528923060.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:01.086Z,1528923061.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:01.488Z,1528923061.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:01.892Z,1528923061.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:02.283Z,1528923062.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:02.682Z,1528923062.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:03.084Z,1528923063.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:03.484Z,1528923063.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:03.883Z,1528923063.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:04.283Z,1528923064.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:04.686Z,1528923064.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:05.084Z,1528923065.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:05.481Z,1528923065.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:05.887Z,1528923065.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:06.282Z,1528923066.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:06.681Z,1528923066.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:07.086Z,1528923067.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:07.436Z,1528923067.436 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:51:07.490Z,1528923067.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:07.883Z,1528923067.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:08.283Z,1528923068.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:08.682Z,1528923068.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:09.080Z,1528923069.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:09.488Z,1528923069.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:09.892Z,1528923069.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:10.283Z,1528923070.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:10.684Z,1528923070.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:11.085Z,1528923071.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:11.479Z,1528923071.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:11.883Z,1528923071.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:12.284Z,1528923072.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:12.689Z,1528923072.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:13.083Z,1528923073.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:13.484Z,1528923073.484 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:13.484Z,1528923073.484 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 347
2018-06-13T20:51:13.484Z,1528923073.484 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:51:13.486Z,1528923073.486 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:13.486Z,1528923073.486 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 347
2018-06-13T20:51:13.486Z,1528923073.486 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:51:13.488Z,1528923073.488 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:13.488Z,1528923073.488 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 347
2018-06-13T20:51:13.488Z,1528923073.488 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:51:13.577Z,1528923073.577 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:51:13.577Z,1528923073.577 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:51:13.578Z,1528923073.578 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:51:13.966Z,1528923073.966 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:51:13.966Z,1528923073.966 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 347
2018-06-13T20:51:13.966Z,1528923073.966 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:51:13.967Z,1528923073.967 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 347
2018-06-13T20:51:13.967Z,1528923073.967 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:51:13.967Z,1528923073.967 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 347
2018-06-13T20:51:14.282Z,1528923074.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:51:14.282Z,1528923074.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:51:14.283Z,1528923074.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:51:14.283Z,1528923074.283 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:51:14.283Z,1528923074.283 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:51:14.284Z,1528923074.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:51:14.284Z,1528923074.284 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:51:14.285Z,1528923074.285 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:51:14.285Z,1528923074.285 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:51:14.694Z,1528923074.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T20:51:14.695Z,1528923074.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:15.071Z,1528923075.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T20:51:15.072Z,1528923075.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:15.496Z,1528923075.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T20:51:15.501Z,1528923075.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:15.875Z,1528923075.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T20:51:15.876Z,1528923075.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:16.275Z,1528923076.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T20:51:16.276Z,1528923076.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:16.677Z,1528923076.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T20:51:16.678Z,1528923076.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:17.075Z,1528923077.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T20:51:17.076Z,1528923077.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:17.473Z,1528923077.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T20:51:17.474Z,1528923077.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:17.884Z,1528923077.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T20:51:17.901Z,1528923077.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:18.278Z,1528923078.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T20:51:18.279Z,1528923078.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:18.674Z,1528923078.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T20:51:18.675Z,1528923078.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:19.079Z,1528923079.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T20:51:19.079Z,1528923079.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:19.479Z,1528923079.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T20:51:19.480Z,1528923079.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:19.878Z,1528923079.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T20:51:19.879Z,1528923079.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:20.279Z,1528923080.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T20:51:20.280Z,1528923080.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:20.678Z,1528923080.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T20:51:20.679Z,1528923080.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:21.074Z,1528923081.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T20:51:21.075Z,1528923081.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:21.479Z,1528923081.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T20:51:21.480Z,1528923081.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:21.878Z,1528923081.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T20:51:21.879Z,1528923081.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:22.279Z,1528923082.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T20:51:22.279Z,1528923082.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:22.679Z,1528923082.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T20:51:22.679Z,1528923082.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:23.078Z,1528923083.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T20:51:23.079Z,1528923083.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:23.474Z,1528923083.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T20:51:23.475Z,1528923083.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:23.879Z,1528923083.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T20:51:23.880Z,1528923083.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:24.279Z,1528923084.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T20:51:24.280Z,1528923084.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:24.674Z,1528923084.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T20:51:24.675Z,1528923084.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:25.079Z,1528923085.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T20:51:25.080Z,1528923085.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:25.478Z,1528923085.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T20:51:25.479Z,1528923085.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:25.878Z,1528923085.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T20:51:25.879Z,1528923085.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:26.280Z,1528923086.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T20:51:26.280Z,1528923086.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:26.678Z,1528923086.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T20:51:26.679Z,1528923086.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:27.075Z,1528923087.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T20:51:27.076Z,1528923087.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:27.478Z,1528923087.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T20:51:27.479Z,1528923087.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:27.878Z,1528923087.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T20:51:27.879Z,1528923087.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:28.278Z,1528923088.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T20:51:28.279Z,1528923088.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:28.679Z,1528923088.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T20:51:28.680Z,1528923088.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:29.079Z,1528923089.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T20:51:29.080Z,1528923089.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:29.474Z,1528923089.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T20:51:29.475Z,1528923089.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:29.879Z,1528923089.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T20:51:29.880Z,1528923089.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:30.278Z,1528923090.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T20:51:30.279Z,1528923090.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:30.676Z,1528923090.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T20:51:30.677Z,1528923090.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:31.079Z,1528923091.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T20:51:31.080Z,1528923091.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:31.478Z,1528923091.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T20:51:31.479Z,1528923091.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:31.877Z,1528923091.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T20:51:31.878Z,1528923091.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:32.279Z,1528923092.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T20:51:32.279Z,1528923092.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:32.678Z,1528923092.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T20:51:32.679Z,1528923092.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:33.076Z,1528923093.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T20:51:33.078Z,1528923093.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:33.479Z,1528923093.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T20:51:33.480Z,1528923093.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:33.883Z,1528923093.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:34.279Z,1528923094.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:34.680Z,1528923094.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:35.078Z,1528923095.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:35.477Z,1528923095.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:35.884Z,1528923095.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:36.278Z,1528923096.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:36.677Z,1528923096.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:37.084Z,1528923097.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:37.482Z,1528923097.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:37.882Z,1528923097.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:38.294Z,1528923098.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:38.682Z,1528923098.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:39.078Z,1528923099.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:39.486Z,1528923099.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:39.881Z,1528923099.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:40.282Z,1528923100.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:40.686Z,1528923100.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:41.085Z,1528923101.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:41.479Z,1528923101.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:41.886Z,1528923101.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:42.286Z,1528923102.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:42.679Z,1528923102.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:43.086Z,1528923103.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:43.487Z,1528923103.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:43.886Z,1528923103.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:44.286Z,1528923104.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:44.689Z,1528923104.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:45.078Z,1528923105.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:45.489Z,1528923105.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:45.886Z,1528923105.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:46.282Z,1528923106.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:46.686Z,1528923106.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:47.086Z,1528923107.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:47.481Z,1528923107.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:47.886Z,1528923107.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:48.281Z,1528923108.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:48.682Z,1528923108.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:49.086Z,1528923109.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:49.482Z,1528923109.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:49.882Z,1528923109.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:50.287Z,1528923110.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:50.685Z,1528923110.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:51.077Z,1528923111.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:51.484Z,1528923111.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:51.886Z,1528923111.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:52.286Z,1528923112.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:52.688Z,1528923112.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:53.085Z,1528923113.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:53.480Z,1528923113.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:53.885Z,1528923113.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:54.282Z,1528923114.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:54.677Z,1528923114.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:55.089Z,1528923115.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:55.485Z,1528923115.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:55.885Z,1528923115.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:56.286Z,1528923116.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:56.687Z,1528923116.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:57.083Z,1528923117.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:57.483Z,1528923117.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:57.885Z,1528923117.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:58.285Z,1528923118.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:58.687Z,1528923118.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:59.086Z,1528923119.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:59.477Z,1528923119.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:51:59.886Z,1528923119.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:00.287Z,1528923120.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:00.682Z,1528923120.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:01.086Z,1528923121.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:01.490Z,1528923121.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:01.884Z,1528923121.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:02.292Z,1528923122.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:02.685Z,1528923122.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:03.082Z,1528923123.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:03.492Z,1528923123.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:03.892Z,1528923123.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:04.285Z,1528923124.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:04.688Z,1528923124.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:05.085Z,1528923125.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:05.480Z,1528923125.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:05.886Z,1528923125.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:06.289Z,1528923126.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:06.681Z,1528923126.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:07.088Z,1528923127.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:07.439Z,1528923127.439 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:52:07.486Z,1528923127.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:07.887Z,1528923127.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:08.299Z,1528923128.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:08.685Z,1528923128.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:09.081Z,1528923129.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:09.500Z,1528923129.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:09.901Z,1528923129.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:10.284Z,1528923130.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:10.687Z,1528923130.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:11.100Z,1528923131.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:11.504Z,1528923131.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:11.885Z,1528923131.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:12.285Z,1528923132.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:12.700Z,1528923132.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:13.088Z,1528923133.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:13.486Z,1528923133.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:13.883Z,1528923133.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:14.296Z,1528923134.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:14.686Z,1528923134.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:15.086Z,1528923135.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:15.487Z,1528923135.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:15.900Z,1528923135.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:16.286Z,1528923136.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:16.686Z,1528923136.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:17.090Z,1528923137.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:17.500Z,1528923137.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:17.889Z,1528923137.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:18.286Z,1528923138.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:18.686Z,1528923138.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:19.097Z,1528923139.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:19.495Z,1528923139.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:19.884Z,1528923139.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:20.289Z,1528923140.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:20.699Z,1528923140.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:21.088Z,1528923141.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:21.487Z,1528923141.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:21.897Z,1528923141.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:22.302Z,1528923142.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:22.693Z,1528923142.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:23.091Z,1528923143.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:23.498Z,1528923143.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:23.890Z,1528923143.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:24.298Z,1528923144.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:24.377Z,1528923144.377 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T20:52:24.377Z,1528923144.377 [NAL9602] No Fault, FailCount= 5
2018-06-13T20:52:24.642Z,1528923144.642 [NAL9602](INFO): Powering up NAL9602
2018-06-13T20:52:24.707Z,1528923144.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:25.094Z,1528923145.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:25.490Z,1528923145.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:25.891Z,1528923145.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:26.303Z,1528923146.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:26.702Z,1528923146.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:27.073Z,1528923147.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:27.480Z,1528923147.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:27.878Z,1528923147.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:28.284Z,1528923148.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:28.679Z,1528923148.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:29.076Z,1528923149.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:29.478Z,1528923149.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:29.884Z,1528923149.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:30.279Z,1528923150.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:30.682Z,1528923150.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:31.094Z,1528923151.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:31.483Z,1528923151.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:31.882Z,1528923151.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:32.281Z,1528923152.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:32.682Z,1528923152.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:33.087Z,1528923153.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:33.481Z,1528923153.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:33.882Z,1528923153.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:34.282Z,1528923154.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:34.687Z,1528923154.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:35.080Z,1528923155.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:35.488Z,1528923155.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:35.843Z,1528923155.843 [NAL9602](INFO): NAL9602 initialized
2018-06-13T20:52:35.892Z,1528923155.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:36.291Z,1528923156.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:36.691Z,1528923156.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:37.091Z,1528923157.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:37.520Z,1528923157.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:37.887Z,1528923157.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:38.286Z,1528923158.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:38.683Z,1528923158.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:39.117Z,1528923159.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:39.515Z,1528923159.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:40.674Z,1528923160.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:40.832Z,1528923160.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:41.233Z,1528923161.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:41.636Z,1528923161.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:42.034Z,1528923162.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:42.420Z,1528923162.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:42.825Z,1528923162.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:43.239Z,1528923163.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:43.636Z,1528923163.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:44.815Z,1528923164.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:44.975Z,1528923164.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:45.376Z,1528923165.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:45.782Z,1528923165.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:46.180Z,1528923166.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:46.567Z,1528923166.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:46.978Z,1528923166.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:47.382Z,1528923167.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:48.560Z,1528923168.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:48.736Z,1528923168.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:49.136Z,1528923169.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:49.548Z,1528923169.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:49.935Z,1528923169.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:50.323Z,1528923170.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:50.729Z,1528923170.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:51.152Z,1528923171.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:51.539Z,1528923171.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:52.760Z,1528923172.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:52.899Z,1528923172.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:53.309Z,1528923173.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:53.709Z,1528923173.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:54.109Z,1528923174.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:54.496Z,1528923174.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:54.907Z,1528923174.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:55.315Z,1528923175.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:55.709Z,1528923175.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:56.894Z,1528923176.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:57.057Z,1528923177.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:57.454Z,1528923177.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:57.868Z,1528923177.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:58.260Z,1528923178.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:58.659Z,1528923178.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:59.046Z,1528923179.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:59.430Z,1528923179.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:52:59.854Z,1528923179.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:00.269Z,1528923180.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:00.671Z,1528923180.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:01.831Z,1528923181.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:01.974Z,1528923181.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:02.384Z,1528923182.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:02.792Z,1528923182.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:03.182Z,1528923183.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:03.574Z,1528923183.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:03.991Z,1528923183.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:04.374Z,1528923184.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:04.771Z,1528923184.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:05.183Z,1528923185.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:06.370Z,1528923186.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:06.528Z,1528923186.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:06.924Z,1528923186.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:07.327Z,1528923187.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:07.664Z,1528923187.664 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:53:07.739Z,1528923187.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:08.104Z,1528923188.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:08.500Z,1528923188.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:08.905Z,1528923188.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:09.338Z,1528923189.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:09.735Z,1528923189.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:10.911Z,1528923190.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:11.084Z,1528923191.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:11.488Z,1528923191.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:11.886Z,1528923191.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:12.290Z,1528923192.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:12.676Z,1528923192.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:13.077Z,1528923193.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:13.461Z,1528923193.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:13.888Z,1528923193.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:14.301Z,1528923194.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:14.693Z,1528923194.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:15.943Z,1528923195.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:16.082Z,1528923196.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:16.501Z,1528923196.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:16.902Z,1528923196.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:17.310Z,1528923197.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:17.698Z,1528923197.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:18.101Z,1528923198.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:18.497Z,1528923198.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:18.882Z,1528923198.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:19.314Z,1528923199.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:19.714Z,1528923199.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:20.918Z,1528923200.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:21.067Z,1528923201.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:21.461Z,1528923201.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:21.866Z,1528923201.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:22.262Z,1528923202.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:22.652Z,1528923202.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:23.054Z,1528923203.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:23.464Z,1528923203.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:23.855Z,1528923203.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:24.276Z,1528923204.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:24.662Z,1528923204.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:25.901Z,1528923205.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:26.031Z,1528923206.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:26.458Z,1528923206.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:26.963Z,1528923206.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:27.247Z,1528923207.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:27.640Z,1528923207.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:28.044Z,1528923208.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:28.438Z,1528923208.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:28.840Z,1528923208.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:29.271Z,1528923209.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:29.670Z,1528923209.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:31.099Z,1528923211.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:31.248Z,1528923211.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:31.671Z,1528923211.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:32.055Z,1528923212.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:32.451Z,1528923212.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:32.847Z,1528923212.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:33.243Z,1528923213.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:33.644Z,1528923213.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:34.073Z,1528923214.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:34.470Z,1528923214.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:35.683Z,1528923215.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:35.833Z,1528923215.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:36.237Z,1528923216.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:36.634Z,1528923216.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:37.041Z,1528923217.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:37.440Z,1528923217.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:37.826Z,1528923217.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:38.248Z,1528923218.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:38.651Z,1528923218.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:39.839Z,1528923219.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:39.990Z,1528923219.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:40.390Z,1528923220.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:40.782Z,1528923220.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:41.181Z,1528923221.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:41.579Z,1528923221.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:41.965Z,1528923221.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:42.393Z,1528923222.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:42.795Z,1528923222.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:43.954Z,1528923223.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:44.070Z,1528923224.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:44.505Z,1528923224.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:44.902Z,1528923224.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:45.304Z,1528923225.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:45.696Z,1528923225.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:46.076Z,1528923226.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:46.500Z,1528923226.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:46.882Z,1528923226.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:47.311Z,1528923227.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:47.708Z,1528923227.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:48.879Z,1528923228.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:49.028Z,1528923229.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:49.428Z,1528923229.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:49.829Z,1528923229.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:50.228Z,1528923230.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:50.624Z,1528923230.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:51.040Z,1528923231.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:51.423Z,1528923231.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:51.831Z,1528923231.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:53.071Z,1528923233.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:53.230Z,1528923233.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:53.659Z,1528923233.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:54.038Z,1528923234.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:54.437Z,1528923234.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:54.828Z,1528923234.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:55.244Z,1528923235.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:55.627Z,1528923235.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:56.027Z,1528923236.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:56.439Z,1528923236.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:56.859Z,1528923236.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:58.065Z,1528923238.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:58.228Z,1528923238.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:58.623Z,1528923238.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:59.023Z,1528923239.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:59.428Z,1528923239.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:53:59.818Z,1528923239.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:00.220Z,1528923240.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:00.617Z,1528923240.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:01.026Z,1528923241.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:01.435Z,1528923241.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:01.885Z,1528923241.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:03.124Z,1528923243.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:03.280Z,1528923243.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:03.678Z,1528923243.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:04.081Z,1528923244.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:04.478Z,1528923244.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:04.876Z,1528923244.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:05.292Z,1528923245.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:05.674Z,1528923245.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:06.096Z,1528923246.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:06.491Z,1528923246.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:07.703Z,1528923247.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:07.814Z,1528923247.814 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:54:07.883Z,1528923247.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:08.287Z,1528923248.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:08.688Z,1528923248.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:09.079Z,1528923249.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:09.478Z,1528923249.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:09.873Z,1528923249.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:10.296Z,1528923250.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:10.681Z,1528923250.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:11.847Z,1528923251.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:11.988Z,1528923251.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:12.388Z,1528923252.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:12.795Z,1528923252.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:13.190Z,1528923253.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:13.590Z,1528923253.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:13.968Z,1528923253.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:14.400Z,1528923254.400 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:14.400Z,1528923254.400 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 348
2018-06-13T20:54:14.400Z,1528923254.400 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:54:14.402Z,1528923254.402 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:14.402Z,1528923254.402 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 348
2018-06-13T20:54:14.403Z,1528923254.403 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:54:14.404Z,1528923254.404 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:14.404Z,1528923254.404 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 348
2018-06-13T20:54:14.404Z,1528923254.404 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:54:14.485Z,1528923254.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:54:14.485Z,1528923254.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:54:14.486Z,1528923254.486 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:54:14.878Z,1528923254.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:54:14.878Z,1528923254.878 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 348
2018-06-13T20:54:14.879Z,1528923254.879 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:54:14.879Z,1528923254.879 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 348
2018-06-13T20:54:14.879Z,1528923254.879 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:54:14.879Z,1528923254.879 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 348
2018-06-13T20:54:15.971Z,1528923255.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:54:15.971Z,1528923255.971 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:54:15.972Z,1528923255.972 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:54:15.972Z,1528923255.972 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:54:15.989Z,1528923255.989 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:54:15.989Z,1528923255.989 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:54:15.989Z,1528923255.989 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:54:15.990Z,1528923255.990 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:54:15.990Z,1528923255.990 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:54:16.123Z,1528923256.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T20:54:16.124Z,1528923256.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:16.549Z,1528923256.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T20:54:16.550Z,1528923256.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:16.949Z,1528923256.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T20:54:16.950Z,1528923256.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:17.349Z,1528923257.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T20:54:17.350Z,1528923257.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:17.723Z,1528923257.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T20:54:17.724Z,1528923257.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:18.119Z,1528923258.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T20:54:18.120Z,1528923258.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:18.523Z,1528923258.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T20:54:18.524Z,1528923258.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:18.923Z,1528923258.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T20:54:18.924Z,1528923258.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:19.354Z,1528923259.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T20:54:19.355Z,1528923259.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:19.752Z,1528923259.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T20:54:19.753Z,1528923259.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:20.919Z,1528923260.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T20:54:20.920Z,1528923260.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:21.063Z,1528923261.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T20:54:21.064Z,1528923261.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:21.468Z,1528923261.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T20:54:21.469Z,1528923261.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:21.865Z,1528923261.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T20:54:21.866Z,1528923261.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:22.261Z,1528923262.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T20:54:22.262Z,1528923262.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:22.653Z,1528923262.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T20:54:22.654Z,1528923262.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:23.053Z,1528923263.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T20:54:23.054Z,1528923263.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:23.472Z,1528923263.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T20:54:23.473Z,1528923263.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:23.864Z,1528923263.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T20:54:23.866Z,1528923263.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:25.074Z,1528923265.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T20:54:25.075Z,1528923265.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:25.261Z,1528923265.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T20:54:25.262Z,1528923265.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:25.660Z,1528923265.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T20:54:25.661Z,1528923265.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:26.064Z,1528923266.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T20:54:26.069Z,1528923266.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:26.454Z,1528923266.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T20:54:26.455Z,1528923266.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:26.835Z,1528923266.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T20:54:26.836Z,1528923266.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:27.236Z,1528923267.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T20:54:27.237Z,1528923267.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:27.635Z,1528923267.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T20:54:27.636Z,1528923267.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:28.040Z,1528923268.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T20:54:28.041Z,1528923268.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:28.478Z,1528923268.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T20:54:28.479Z,1528923268.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:28.842Z,1528923268.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T20:54:28.843Z,1528923268.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:30.092Z,1528923270.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T20:54:30.093Z,1528923270.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:30.275Z,1528923270.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T20:54:30.276Z,1528923270.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:30.667Z,1528923270.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-06-13T20:54:30.668Z,1528923270.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:31.080Z,1528923271.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-06-13T20:54:31.081Z,1528923271.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:31.477Z,1528923271.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T20:54:31.478Z,1528923271.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:31.868Z,1528923271.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T20:54:31.873Z,1528923271.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:32.248Z,1528923272.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T20:54:32.249Z,1528923272.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:32.648Z,1528923272.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T20:54:32.649Z,1528923272.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:33.052Z,1528923273.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T20:54:33.054Z,1528923273.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:33.480Z,1528923273.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T20:54:33.481Z,1528923273.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:33.877Z,1528923273.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T20:54:33.878Z,1528923273.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:35.099Z,1528923275.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:35.249Z,1528923275.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:35.648Z,1528923275.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:36.053Z,1528923276.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:36.448Z,1528923276.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:36.832Z,1528923276.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:37.238Z,1528923277.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:37.633Z,1528923277.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:38.044Z,1528923278.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:38.457Z,1528923278.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:38.849Z,1528923278.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:40.194Z,1528923280.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:40.336Z,1528923280.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:40.737Z,1528923280.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:41.144Z,1528923281.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:41.544Z,1528923281.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:41.934Z,1528923281.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:42.337Z,1528923282.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:42.736Z,1528923282.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:43.148Z,1528923283.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:43.549Z,1528923283.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:44.744Z,1528923284.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:44.892Z,1528923284.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:45.289Z,1528923285.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:45.687Z,1528923285.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:46.093Z,1528923286.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:46.468Z,1528923286.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:46.869Z,1528923286.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:47.306Z,1528923287.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:47.703Z,1528923287.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:48.866Z,1528923288.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:49.006Z,1528923289.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:49.427Z,1528923289.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:49.815Z,1528923289.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:50.215Z,1528923290.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:50.610Z,1528923290.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:51.018Z,1528923291.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:51.433Z,1528923291.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:51.819Z,1528923291.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:52.976Z,1528923292.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:53.118Z,1528923293.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:53.524Z,1528923293.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:53.923Z,1528923293.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:54.326Z,1528923294.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:54.723Z,1528923294.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:55.110Z,1528923295.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:55.544Z,1528923295.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:55.926Z,1528923295.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:56.335Z,1528923296.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:57.578Z,1528923297.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:57.742Z,1528923297.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:58.138Z,1528923298.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:58.541Z,1528923298.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:58.939Z,1528923298.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:59.336Z,1528923299.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:54:59.730Z,1528923299.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:00.127Z,1528923300.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:00.552Z,1528923300.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:00.956Z,1528923300.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:02.149Z,1528923302.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:02.304Z,1528923302.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:02.700Z,1528923302.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:03.093Z,1528923303.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:03.494Z,1528923303.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:03.896Z,1528923303.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:04.285Z,1528923304.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:04.684Z,1528923304.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:05.087Z,1528923305.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:05.505Z,1528923305.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:05.906Z,1528923305.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:07.111Z,1528923307.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:07.248Z,1528923307.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:07.658Z,1528923307.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:07.996Z,1528923307.996 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:55:08.062Z,1528923308.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:08.455Z,1528923308.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:08.855Z,1528923308.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:09.254Z,1528923309.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:09.645Z,1528923309.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:10.055Z,1528923310.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:10.466Z,1528923310.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:10.864Z,1528923310.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:12.401Z,1528923312.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:12.567Z,1528923312.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:12.963Z,1528923312.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:13.364Z,1528923313.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:13.772Z,1528923313.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:14.158Z,1528923314.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:14.552Z,1528923314.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:14.946Z,1528923314.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:15.370Z,1528923315.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:15.777Z,1528923315.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:16.970Z,1528923316.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:17.113Z,1528923317.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:17.517Z,1528923317.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:17.922Z,1528923317.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:18.317Z,1528923318.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:18.716Z,1528923318.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:19.111Z,1528923319.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:19.532Z,1528923319.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:19.932Z,1528923319.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:21.103Z,1528923321.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:21.255Z,1528923321.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:21.636Z,1528923321.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:22.042Z,1528923322.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:22.442Z,1528923322.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:22.839Z,1528923322.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:23.231Z,1528923323.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:23.631Z,1528923323.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:24.034Z,1528923324.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:24.462Z,1528923324.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:24.841Z,1528923324.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:26.016Z,1528923326.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:26.184Z,1528923326.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:26.572Z,1528923326.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:26.991Z,1528923326.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:27.377Z,1528923327.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:27.770Z,1528923327.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:28.172Z,1528923328.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:28.613Z,1528923328.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:28.988Z,1528923328.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:30.171Z,1528923330.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:30.310Z,1528923330.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:30.732Z,1528923330.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:31.130Z,1528923331.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:31.530Z,1528923331.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:31.924Z,1528923331.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:32.325Z,1528923332.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:32.704Z,1528923332.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:33.129Z,1528923333.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:33.546Z,1528923333.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:33.930Z,1528923333.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:35.149Z,1528923335.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:35.299Z,1528923335.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:35.704Z,1528923335.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:36.097Z,1528923336.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:36.494Z,1528923336.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:36.890Z,1528923336.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:37.292Z,1528923337.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:37.680Z,1528923337.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:38.095Z,1528923338.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:38.505Z,1528923338.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:38.899Z,1528923338.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:40.142Z,1528923340.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:40.291Z,1528923340.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:40.702Z,1528923340.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:41.105Z,1528923341.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:41.508Z,1528923341.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:41.898Z,1528923341.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:42.299Z,1528923342.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:42.696Z,1528923342.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:43.092Z,1528923343.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:43.510Z,1528923343.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:43.905Z,1528923343.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:45.269Z,1528923345.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:45.419Z,1528923345.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:45.824Z,1528923345.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:46.216Z,1528923346.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:46.615Z,1528923346.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:47.002Z,1528923347.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:47.412Z,1528923347.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:47.809Z,1528923347.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:48.222Z,1528923348.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:48.620Z,1528923348.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:49.783Z,1528923349.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:49.945Z,1528923349.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:50.363Z,1528923350.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:50.762Z,1528923350.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:51.159Z,1528923351.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:51.532Z,1528923351.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:51.989Z,1528923351.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:52.511Z,1528923352.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:52.787Z,1528923352.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:53.924Z,1528923353.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:54.087Z,1528923354.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:54.489Z,1528923354.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:54.883Z,1528923354.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:55.284Z,1528923355.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:55.676Z,1528923355.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:56.058Z,1528923356.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:56.494Z,1528923356.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:56.899Z,1528923356.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:58.063Z,1528923358.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:58.219Z,1528923358.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:58.648Z,1528923358.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:59.040Z,1528923359.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:59.441Z,1528923359.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:55:59.820Z,1528923359.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:00.256Z,1528923360.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:00.637Z,1528923360.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:01.040Z,1528923361.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:02.242Z,1528923362.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:02.400Z,1528923362.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:02.800Z,1528923362.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:03.198Z,1528923363.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:03.597Z,1528923363.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:03.992Z,1528923363.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:04.376Z,1528923364.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:04.777Z,1528923364.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:05.198Z,1528923365.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:05.614Z,1528923365.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:06.008Z,1528923366.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:07.209Z,1528923367.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:07.367Z,1528923367.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:07.769Z,1528923367.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:08.108Z,1528923368.108 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:56:08.176Z,1528923368.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:08.570Z,1528923368.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:08.961Z,1528923368.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:09.367Z,1528923369.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:09.752Z,1528923369.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:10.169Z,1528923370.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:10.574Z,1528923370.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:10.975Z,1528923370.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:12.184Z,1528923372.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:12.315Z,1528923372.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:12.729Z,1528923372.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:13.131Z,1528923373.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:13.530Z,1528923373.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:13.925Z,1528923373.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:14.308Z,1528923374.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:14.709Z,1528923374.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:15.118Z,1528923375.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:15.547Z,1528923375.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:15.927Z,1528923375.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:17.158Z,1528923377.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:17.308Z,1528923377.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:17.709Z,1528923377.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:18.116Z,1528923378.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:18.516Z,1528923378.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:18.910Z,1528923378.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:19.316Z,1528923379.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:19.709Z,1528923379.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:20.114Z,1528923380.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:21.286Z,1528923381.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:21.475Z,1528923381.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:21.872Z,1528923381.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:22.271Z,1528923382.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:22.688Z,1528923382.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:23.072Z,1528923383.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:23.473Z,1528923383.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:23.867Z,1528923383.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:24.284Z,1528923384.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:24.675Z,1528923384.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:25.833Z,1528923385.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:25.980Z,1528923385.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:26.378Z,1528923386.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:26.777Z,1528923386.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:27.180Z,1528923387.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:27.584Z,1528923387.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:27.970Z,1528923387.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:28.387Z,1528923388.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:28.771Z,1528923388.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:29.178Z,1528923389.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:30.369Z,1528923390.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:30.533Z,1528923390.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:30.926Z,1528923390.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:31.337Z,1528923391.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:31.726Z,1528923391.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:32.124Z,1528923392.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:32.521Z,1528923392.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:32.906Z,1528923392.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:33.334Z,1528923393.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:33.728Z,1528923393.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:34.935Z,1528923394.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:35.091Z,1528923395.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:35.491Z,1528923395.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:35.887Z,1528923395.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:36.288Z,1528923396.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:36.680Z,1528923396.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:37.061Z,1528923397.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:37.505Z,1528923397.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:37.896Z,1528923397.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:39.091Z,1528923399.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:39.247Z,1528923399.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:39.651Z,1528923399.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:40.031Z,1528923400.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:40.427Z,1528923400.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:40.828Z,1528923400.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:41.220Z,1528923401.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:41.655Z,1528923401.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:42.031Z,1528923402.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:43.203Z,1528923403.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:43.463Z,1528923403.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:43.847Z,1528923403.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:44.247Z,1528923404.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:44.674Z,1528923404.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:45.040Z,1528923405.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:45.441Z,1528923405.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:45.844Z,1528923405.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:46.243Z,1528923406.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:46.679Z,1528923406.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:47.050Z,1528923407.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:48.226Z,1528923408.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:48.355Z,1528923408.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:48.782Z,1528923408.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:49.186Z,1528923409.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:49.583Z,1528923409.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:49.980Z,1528923409.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:50.364Z,1528923410.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:50.764Z,1528923410.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:51.166Z,1528923411.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:51.591Z,1528923411.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:51.995Z,1528923411.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:53.216Z,1528923413.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:53.392Z,1528923413.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:53.794Z,1528923413.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:54.202Z,1528923414.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:54.595Z,1528923414.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:54.973Z,1528923414.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:55.389Z,1528923415.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:55.776Z,1528923415.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:56.180Z,1528923416.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:56.608Z,1528923416.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:57.003Z,1528923417.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:58.228Z,1528923418.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:58.386Z,1528923418.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:58.820Z,1528923418.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:59.224Z,1528923419.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:56:59.616Z,1528923419.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:00.005Z,1528923420.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:00.409Z,1528923420.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:00.794Z,1528923420.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:01.193Z,1528923421.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:01.644Z,1528923421.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:02.019Z,1528923422.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:03.235Z,1528923423.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:03.396Z,1528923423.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:03.784Z,1528923423.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:04.185Z,1528923424.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:04.586Z,1528923424.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:04.972Z,1528923424.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:05.373Z,1528923425.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:05.778Z,1528923425.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:06.171Z,1528923426.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:06.594Z,1528923426.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:06.990Z,1528923426.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:08.195Z,1528923428.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:08.297Z,1528923428.297 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:57:08.362Z,1528923428.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:08.779Z,1528923428.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:09.178Z,1528923429.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:09.554Z,1528923429.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:09.952Z,1528923429.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:10.373Z,1528923430.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:10.775Z,1528923430.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:11.176Z,1528923431.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:12.341Z,1528923432.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:12.470Z,1528923432.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:12.889Z,1528923432.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:13.280Z,1528923433.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:13.681Z,1528923433.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:14.070Z,1528923434.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:14.470Z,1528923434.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:14.867Z,1528923434.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:15.271Z,1528923435.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:15.691Z,1528923435.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:16.081Z,1528923436.081 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:16.081Z,1528923436.081 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 349
2018-06-13T20:57:16.081Z,1528923436.081 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T20:57:16.083Z,1528923436.083 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:16.083Z,1528923436.083 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 349
2018-06-13T20:57:16.083Z,1528923436.083 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T20:57:16.085Z,1528923436.085 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:16.085Z,1528923436.085 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 349
2018-06-13T20:57:16.085Z,1528923436.085 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T20:57:16.161Z,1528923436.161 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T20:57:16.161Z,1528923436.161 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T20:57:16.162Z,1528923436.162 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T20:57:17.373Z,1528923437.373 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T20:57:17.373Z,1528923437.373 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 349
2018-06-13T20:57:17.373Z,1528923437.373 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T20:57:17.373Z,1528923437.373 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 349
2018-06-13T20:57:17.374Z,1528923437.374 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T20:57:17.374Z,1528923437.374 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 349
2018-06-13T20:57:17.457Z,1528923437.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T20:57:17.457Z,1528923437.457 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:57:17.458Z,1528923437.458 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:57:17.458Z,1528923437.458 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T20:57:17.458Z,1528923437.458 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:57:17.459Z,1528923437.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:57:17.459Z,1528923437.459 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T20:57:17.459Z,1528923437.459 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T20:57:17.460Z,1528923437.460 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T20:57:17.847Z,1528923437.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T20:57:17.848Z,1528923437.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:18.272Z,1528923438.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T20:57:18.273Z,1528923438.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:18.641Z,1528923438.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T20:57:18.642Z,1528923438.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:19.032Z,1528923439.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T20:57:19.033Z,1528923439.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:19.444Z,1528923439.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T20:57:19.449Z,1528923439.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:19.829Z,1528923439.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T20:57:19.830Z,1528923439.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:20.236Z,1528923440.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T20:57:20.238Z,1528923440.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:20.650Z,1528923440.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T20:57:20.651Z,1528923440.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:21.045Z,1528923441.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T20:57:21.046Z,1528923441.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:22.236Z,1528923442.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T20:57:22.237Z,1528923442.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:22.376Z,1528923442.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T20:57:22.377Z,1528923442.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:22.793Z,1528923442.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T20:57:22.794Z,1528923442.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:23.193Z,1528923443.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T20:57:23.194Z,1528923443.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:23.600Z,1528923443.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T20:57:23.601Z,1528923443.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:23.993Z,1528923443.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T20:57:23.994Z,1528923443.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:24.412Z,1528923444.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T20:57:24.413Z,1528923444.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:24.788Z,1528923444.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T20:57:24.789Z,1528923444.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:25.200Z,1528923445.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T20:57:25.201Z,1528923445.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:26.395Z,1528923446.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T20:57:26.396Z,1528923446.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:26.559Z,1528923446.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T20:57:26.560Z,1528923446.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:26.953Z,1528923446.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T20:57:26.954Z,1528923446.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:27.353Z,1528923447.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T20:57:27.354Z,1528923447.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:27.752Z,1528923447.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T20:57:27.753Z,1528923447.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:28.148Z,1528923448.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T20:57:28.153Z,1528923448.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:28.532Z,1528923448.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T20:57:28.557Z,1528923448.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:28.928Z,1528923448.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T20:57:28.930Z,1528923448.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:29.356Z,1528923449.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T20:57:29.361Z,1528923449.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:29.771Z,1528923449.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T20:57:29.772Z,1528923449.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:30.158Z,1528923450.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T20:57:30.159Z,1528923450.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:31.373Z,1528923451.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T20:57:31.374Z,1528923451.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:31.524Z,1528923451.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T20:57:31.525Z,1528923451.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:31.923Z,1528923451.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T20:57:31.924Z,1528923451.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:32.323Z,1528923452.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T20:57:32.323Z,1528923452.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:32.718Z,1528923452.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T20:57:32.719Z,1528923452.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:33.116Z,1528923453.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T20:57:33.117Z,1528923453.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:33.515Z,1528923453.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T20:57:33.516Z,1528923453.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:33.908Z,1528923453.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T20:57:33.917Z,1528923453.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:34.325Z,1528923454.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T20:57:34.326Z,1528923454.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:34.730Z,1528923454.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T20:57:34.731Z,1528923454.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:35.127Z,1528923455.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T20:57:35.128Z,1528923455.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:36.344Z,1528923456.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:36.466Z,1528923456.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:36.892Z,1528923456.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:37.286Z,1528923457.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:37.686Z,1528923457.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:38.081Z,1528923458.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:38.465Z,1528923458.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:38.865Z,1528923458.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:39.269Z,1528923459.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:39.701Z,1528923459.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:40.094Z,1528923460.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:41.463Z,1528923461.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:41.613Z,1528923461.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:42.020Z,1528923462.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:42.413Z,1528923462.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:42.818Z,1528923462.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:43.206Z,1528923463.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:43.603Z,1528923463.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:44.003Z,1528923464.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:44.422Z,1528923464.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:44.817Z,1528923464.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:46.022Z,1528923466.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:46.201Z,1528923466.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:46.602Z,1528923466.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:47.005Z,1528923467.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:47.404Z,1528923467.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:47.797Z,1528923467.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:48.203Z,1528923468.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:48.620Z,1528923468.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:49.017Z,1528923469.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:50.200Z,1528923470.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:50.356Z,1528923470.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:50.763Z,1528923470.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:51.158Z,1528923471.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:51.563Z,1528923471.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:51.957Z,1528923471.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:52.341Z,1528923472.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:52.767Z,1528923472.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:53.166Z,1528923473.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:54.332Z,1528923474.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:54.478Z,1528923474.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:54.877Z,1528923474.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:55.282Z,1528923475.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:55.676Z,1528923475.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:56.073Z,1528923476.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:56.468Z,1528923476.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:56.868Z,1528923476.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:57.276Z,1528923477.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:57.684Z,1528923477.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:58.081Z,1528923478.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:59.270Z,1528923479.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:59.433Z,1528923479.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:57:59.827Z,1528923479.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:00.231Z,1528923480.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:00.628Z,1528923480.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:01.025Z,1528923481.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:01.435Z,1528923481.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:01.821Z,1528923481.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:02.230Z,1528923482.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:03.418Z,1528923483.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:03.575Z,1528923483.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:03.973Z,1528923483.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:04.377Z,1528923484.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:04.774Z,1528923484.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:05.172Z,1528923485.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:05.575Z,1528923485.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:05.969Z,1528923485.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:06.369Z,1528923486.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:06.786Z,1528923486.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:07.175Z,1528923487.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:08.355Z,1528923488.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:08.472Z,1528923488.472 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:58:08.508Z,1528923488.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:08.939Z,1528923488.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:09.343Z,1528923489.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:09.735Z,1528923489.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:10.112Z,1528923490.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:10.512Z,1528923490.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:10.907Z,1528923490.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:11.316Z,1528923491.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:11.815Z,1528923491.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:12.234Z,1528923492.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:13.989Z,1528923493.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:14.130Z,1528923494.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:14.552Z,1528923494.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:14.960Z,1528923494.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:15.354Z,1528923495.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:15.752Z,1528923495.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:16.142Z,1528923496.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:16.555Z,1528923496.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:16.940Z,1528923496.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:18.121Z,1528923498.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:18.275Z,1528923498.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:18.672Z,1528923498.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:19.074Z,1528923499.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:19.471Z,1528923499.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:19.870Z,1528923499.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:20.273Z,1528923500.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:20.683Z,1528923500.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:21.070Z,1528923501.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:21.475Z,1528923501.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:22.663Z,1528923502.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:22.828Z,1528923502.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:23.218Z,1528923503.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:23.620Z,1528923503.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:24.028Z,1528923504.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:24.396Z,1528923504.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:24.796Z,1528923504.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:25.230Z,1528923505.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:25.636Z,1528923505.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:26.007Z,1528923506.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:27.259Z,1528923507.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:27.435Z,1528923507.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:27.832Z,1528923507.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:28.248Z,1528923508.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:28.640Z,1528923508.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:29.035Z,1528923509.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:29.426Z,1528923509.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:29.846Z,1528923509.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:30.247Z,1528923510.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:31.403Z,1528923511.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:31.544Z,1528923511.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:31.953Z,1528923511.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:32.353Z,1528923512.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:32.756Z,1528923512.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:33.140Z,1528923513.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:33.548Z,1528923513.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:33.937Z,1528923513.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:34.342Z,1528923514.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:34.755Z,1528923514.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:35.150Z,1528923515.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:36.349Z,1528923516.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:36.482Z,1528923516.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:36.893Z,1528923516.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:37.301Z,1528923517.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:37.696Z,1528923517.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:38.094Z,1528923518.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:38.512Z,1528923518.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:38.896Z,1528923518.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:39.289Z,1528923519.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:39.698Z,1528923519.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:40.911Z,1528923520.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:41.085Z,1528923521.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:41.464Z,1528923521.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:41.867Z,1528923521.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:42.263Z,1528923522.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:42.661Z,1528923522.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:43.057Z,1528923523.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:43.461Z,1528923523.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:43.887Z,1528923523.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:44.266Z,1528923524.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:45.505Z,1528923525.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:45.642Z,1528923525.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:46.049Z,1528923526.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:46.463Z,1528923526.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:46.949Z,1528923526.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:47.311Z,1528923527.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:47.671Z,1528923527.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:48.041Z,1528923528.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:48.445Z,1528923528.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:48.861Z,1528923528.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:49.254Z,1528923529.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:50.707Z,1528923530.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:50.868Z,1528923530.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:51.275Z,1528923531.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:51.664Z,1528923531.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:52.068Z,1528923532.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:52.460Z,1528923532.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:52.867Z,1528923532.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:53.262Z,1528923533.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:53.677Z,1528923533.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:54.070Z,1528923534.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:55.283Z,1528923535.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:55.435Z,1528923535.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:55.836Z,1528923535.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:56.238Z,1528923536.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:56.636Z,1528923536.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:57.039Z,1528923537.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:57.433Z,1528923537.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:57.862Z,1528923537.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:58.238Z,1528923538.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:59.416Z,1528923539.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:59.564Z,1528923539.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:58:59.972Z,1528923539.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:00.375Z,1528923540.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:00.771Z,1528923540.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:01.165Z,1528923541.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:01.550Z,1528923541.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:01.952Z,1528923541.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:02.354Z,1528923542.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:02.782Z,1528923542.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:03.180Z,1528923543.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:04.348Z,1528923544.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:04.491Z,1528923544.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:04.890Z,1528923544.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:05.300Z,1528923545.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:05.693Z,1528923545.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:06.087Z,1528923546.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:06.490Z,1528923546.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:06.904Z,1528923546.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:07.294Z,1528923547.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:08.481Z,1528923548.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:08.573Z,1528923548.573 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T20:59:08.612Z,1528923548.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:09.040Z,1528923549.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:09.452Z,1528923549.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:09.840Z,1528923549.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:10.233Z,1528923550.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:10.640Z,1528923550.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:11.021Z,1528923551.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:11.444Z,1528923551.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:11.859Z,1528923551.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:12.248Z,1528923552.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:13.509Z,1528923553.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:13.664Z,1528923553.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:14.060Z,1528923554.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:14.468Z,1528923554.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:14.858Z,1528923554.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:15.256Z,1528923555.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:15.656Z,1528923555.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:16.036Z,1528923556.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:16.458Z,1528923556.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:16.870Z,1528923556.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:17.272Z,1528923557.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:18.487Z,1528923558.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:18.655Z,1528923558.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:19.075Z,1528923559.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:19.470Z,1528923559.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:19.880Z,1528923559.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:20.245Z,1528923560.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:20.646Z,1528923560.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:21.045Z,1528923561.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:21.450Z,1528923561.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:21.884Z,1528923561.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:22.283Z,1528923562.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:23.499Z,1528923563.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:23.676Z,1528923563.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:24.084Z,1528923564.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:24.488Z,1528923564.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:24.883Z,1528923564.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:25.281Z,1528923565.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:25.656Z,1528923565.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:26.053Z,1528923566.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:26.457Z,1528923566.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:26.886Z,1528923566.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:27.283Z,1528923567.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:28.500Z,1528923568.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:28.623Z,1528923568.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:29.044Z,1528923569.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:29.442Z,1528923569.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:29.847Z,1528923569.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:30.238Z,1528923570.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:30.643Z,1528923570.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:31.037Z,1528923571.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:31.448Z,1528923571.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:31.854Z,1528923571.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:32.239Z,1528923572.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:33.471Z,1528923573.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:33.632Z,1528923573.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:34.016Z,1528923574.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:34.418Z,1528923574.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:34.828Z,1528923574.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:35.207Z,1528923575.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:35.613Z,1528923575.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:36.017Z,1528923576.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:36.410Z,1528923576.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:36.832Z,1528923576.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:37.223Z,1528923577.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:38.428Z,1528923578.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:38.582Z,1528923578.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:38.987Z,1528923578.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:39.413Z,1528923579.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:39.806Z,1528923579.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:40.184Z,1528923580.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:40.608Z,1528923580.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:40.988Z,1528923580.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:41.406Z,1528923581.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:42.565Z,1528923582.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:42.728Z,1528923582.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:43.128Z,1528923583.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:43.532Z,1528923583.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:43.929Z,1528923583.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:44.316Z,1528923584.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:44.719Z,1528923584.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:45.115Z,1528923585.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:45.515Z,1528923585.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:45.932Z,1528923585.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:46.328Z,1528923586.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:47.520Z,1528923587.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:47.672Z,1528923587.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:48.063Z,1528923588.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:48.466Z,1528923588.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:48.871Z,1528923588.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:49.268Z,1528923589.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:49.664Z,1528923589.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:50.044Z,1528923590.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:50.459Z,1528923590.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:50.878Z,1528923590.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:51.273Z,1528923591.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:52.468Z,1528923592.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:52.617Z,1528923592.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:53.036Z,1528923593.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:53.430Z,1528923593.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:53.831Z,1528923593.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:54.226Z,1528923594.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:54.641Z,1528923594.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:55.026Z,1528923595.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:55.436Z,1528923595.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:56.655Z,1528923596.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:56.827Z,1528923596.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:57.230Z,1528923597.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:57.628Z,1528923597.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:58.028Z,1528923598.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:58.404Z,1528923598.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:58.806Z,1528923598.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:59.205Z,1528923599.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T20:59:59.633Z,1528923599.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:00.029Z,1528923600.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:01.237Z,1528923601.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:01.386Z,1528923601.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:01.832Z,1528923601.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:02.229Z,1528923602.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:02.582Z,1528923602.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:02.988Z,1528923602.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:03.383Z,1528923603.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:03.803Z,1528923603.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:04.202Z,1528923604.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:05.364Z,1528923605.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:05.536Z,1528923605.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:05.932Z,1528923605.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:06.343Z,1528923606.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:06.739Z,1528923606.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:07.118Z,1528923607.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:07.518Z,1528923607.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:07.944Z,1528923607.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:08.343Z,1528923608.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:08.672Z,1528923608.672 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:00:09.512Z,1528923609.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:09.672Z,1528923609.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:10.058Z,1528923610.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:10.462Z,1528923610.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:10.898Z,1528923610.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:11.254Z,1528923611.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:11.650Z,1528923611.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:12.048Z,1528923612.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:12.451Z,1528923612.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:12.864Z,1528923612.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:13.261Z,1528923613.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:14.467Z,1528923614.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:14.618Z,1528923614.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:15.048Z,1528923615.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:15.443Z,1528923615.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:15.842Z,1528923615.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:16.220Z,1528923616.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:16.664Z,1528923616.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:17.049Z,1528923617.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:17.452Z,1528923617.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:18.620Z,1528923618.620 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:18.621Z,1528923618.621 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 350
2018-06-13T21:00:18.621Z,1528923618.621 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:00:18.623Z,1528923618.623 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:18.623Z,1528923618.623 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 350
2018-06-13T21:00:18.623Z,1528923618.623 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:00:18.625Z,1528923618.625 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:18.625Z,1528923618.625 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 350
2018-06-13T21:00:18.625Z,1528923618.625 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:00:18.702Z,1528923618.702 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:00:18.702Z,1528923618.702 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:00:18.702Z,1528923618.702 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:00:18.849Z,1528923618.849 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:00:18.849Z,1528923618.849 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 350
2018-06-13T21:00:18.850Z,1528923618.850 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:00:18.850Z,1528923618.850 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 350
2018-06-13T21:00:18.850Z,1528923618.850 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:00:18.850Z,1528923618.850 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 350
2018-06-13T21:00:19.174Z,1528923619.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:00:19.174Z,1528923619.174 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:00:19.175Z,1528923619.175 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:00:19.175Z,1528923619.175 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:00:19.175Z,1528923619.175 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:00:19.176Z,1528923619.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:00:19.176Z,1528923619.176 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:00:19.176Z,1528923619.176 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:00:19.181Z,1528923619.181 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:00:19.583Z,1528923619.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T21:00:19.584Z,1528923619.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:19.978Z,1528923619.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T21:00:19.979Z,1528923619.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:20.351Z,1528923620.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T21:00:20.352Z,1528923620.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:20.751Z,1528923620.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T21:00:20.752Z,1528923620.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:21.151Z,1528923621.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T21:00:21.152Z,1528923621.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:21.555Z,1528923621.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T21:00:21.556Z,1528923621.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:21.983Z,1528923621.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T21:00:21.984Z,1528923621.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:22.362Z,1528923622.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T21:00:22.363Z,1528923622.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:23.558Z,1528923623.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T21:00:23.559Z,1528923623.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:23.743Z,1528923623.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-06-13T21:00:23.744Z,1528923623.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:24.146Z,1528923624.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T21:00:24.147Z,1528923624.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:24.556Z,1528923624.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T21:00:24.557Z,1528923624.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:24.943Z,1528923624.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T21:00:24.944Z,1528923624.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:25.324Z,1528923625.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T21:00:25.341Z,1528923625.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:25.724Z,1528923625.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T21:00:25.725Z,1528923625.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:26.120Z,1528923626.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T21:00:26.121Z,1528923626.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:26.527Z,1528923626.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T21:00:26.527Z,1528923626.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:26.951Z,1528923626.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T21:00:26.952Z,1528923626.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:27.357Z,1528923627.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T21:00:27.358Z,1528923627.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:28.549Z,1528923628.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T21:00:28.550Z,1528923628.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:28.684Z,1528923628.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T21:00:28.685Z,1528923628.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:29.111Z,1528923629.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T21:00:29.111Z,1528923629.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:29.517Z,1528923629.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T21:00:29.518Z,1528923629.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:29.915Z,1528923629.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T21:00:29.916Z,1528923629.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:30.284Z,1528923630.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T21:00:30.286Z,1528923630.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:30.685Z,1528923630.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T21:00:30.686Z,1528923630.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:31.087Z,1528923631.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T21:00:31.088Z,1528923631.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:31.485Z,1528923631.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T21:00:31.486Z,1528923631.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:31.919Z,1528923631.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T21:00:31.920Z,1528923631.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:32.294Z,1528923632.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T21:00:32.295Z,1528923632.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:33.486Z,1528923633.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T21:00:33.487Z,1528923633.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:33.631Z,1528923633.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T21:00:33.631Z,1528923633.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:34.027Z,1528923634.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T21:00:34.028Z,1528923634.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:34.440Z,1528923634.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T21:00:34.441Z,1528923634.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:34.826Z,1528923634.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T21:00:34.827Z,1528923634.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:35.224Z,1528923635.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T21:00:35.229Z,1528923635.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:35.627Z,1528923635.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T21:00:35.628Z,1528923635.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:36.037Z,1528923636.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T21:00:36.038Z,1528923636.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:36.436Z,1528923636.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T21:00:36.437Z,1528923636.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:37.694Z,1528923637.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T21:00:37.695Z,1528923637.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:37.876Z,1528923637.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T21:00:37.878Z,1528923637.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:38.292Z,1528923638.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T21:00:38.293Z,1528923638.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:38.692Z,1528923638.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:39.087Z,1528923639.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:39.473Z,1528923639.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:39.877Z,1528923639.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:40.275Z,1528923640.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:40.695Z,1528923640.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:41.086Z,1528923641.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:42.292Z,1528923642.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:42.452Z,1528923642.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:42.838Z,1528923642.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:43.242Z,1528923643.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:43.648Z,1528923643.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:44.031Z,1528923644.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:44.430Z,1528923644.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:44.847Z,1528923644.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:45.245Z,1528923645.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:46.424Z,1528923646.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:46.604Z,1528923646.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:46.968Z,1528923646.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:47.378Z,1528923647.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:47.779Z,1528923647.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:48.151Z,1528923648.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:48.552Z,1528923648.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:48.991Z,1528923648.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:49.378Z,1528923649.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:50.535Z,1528923650.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:50.696Z,1528923650.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:51.090Z,1528923651.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:51.490Z,1528923651.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:51.908Z,1528923651.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:52.295Z,1528923652.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:52.702Z,1528923652.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:53.086Z,1528923653.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:53.491Z,1528923653.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:53.897Z,1528923653.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:55.144Z,1528923655.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:55.296Z,1528923655.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:55.692Z,1528923655.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:56.098Z,1528923656.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:56.492Z,1528923656.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:56.890Z,1528923656.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:57.295Z,1528923657.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:57.704Z,1528923657.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:58.096Z,1528923658.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:59.282Z,1528923659.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:59.449Z,1528923659.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:00:59.841Z,1528923659.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:00.252Z,1528923660.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:00.647Z,1528923660.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:01.020Z,1528923661.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:01.421Z,1528923661.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:01.850Z,1528923661.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:02.244Z,1528923662.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:03.420Z,1528923663.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:03.567Z,1528923663.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:03.000Z,1528923664.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:04.400Z,1528923664.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:04.799Z,1528923664.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:05.172Z,1528923665.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:05.572Z,1528923665.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:05.997Z,1528923665.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:06.384Z,1528923666.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:07.576Z,1528923667.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:07.734Z,1528923667.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:08.135Z,1528923668.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:08.543Z,1528923668.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:08.868Z,1528923668.868 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:01:08.940Z,1528923668.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:09.354Z,1528923669.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:09.751Z,1528923669.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:10.111Z,1528923670.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:10.539Z,1528923670.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:13.089Z,1528923673.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:13.222Z,1528923673.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:13.650Z,1528923673.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:14.048Z,1528923674.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:14.448Z,1528923674.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:14.828Z,1528923674.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:15.253Z,1528923675.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:15.641Z,1528923675.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:16.068Z,1528923676.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:16.460Z,1528923676.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:17.608Z,1528923677.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:17.763Z,1528923677.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:18.160Z,1528923678.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:18.563Z,1528923678.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:18.954Z,1528923678.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:19.362Z,1528923679.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:19.771Z,1528923679.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:20.136Z,1528923680.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:20.558Z,1528923680.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:20.966Z,1528923680.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:22.191Z,1528923682.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:22.346Z,1528923682.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:22.771Z,1528923682.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:23.184Z,1528923683.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:23.576Z,1528923683.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:23.971Z,1528923683.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:24.368Z,1528923684.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:24.784Z,1528923684.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:25.182Z,1528923685.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:26.344Z,1528923686.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:26.507Z,1528923686.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:26.893Z,1528923686.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:27.300Z,1528923687.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:27.694Z,1528923687.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:28.082Z,1528923688.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:28.491Z,1528923688.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:28.903Z,1528923688.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:29.280Z,1528923689.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:29.700Z,1528923689.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:30.852Z,1528923690.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:31.031Z,1528923691.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:31.429Z,1528923691.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:31.828Z,1528923691.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:32.238Z,1528923692.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:32.604Z,1528923692.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:32.999Z,1528923692.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:33.401Z,1528923693.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:33.836Z,1528923693.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:34.211Z,1528923694.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:35.398Z,1528923695.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:35.550Z,1528923695.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:35.944Z,1528923695.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:36.346Z,1528923696.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:36.758Z,1528923696.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:37.138Z,1528923697.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:37.548Z,1528923697.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:37.954Z,1528923697.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:38.361Z,1528923698.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:39.584Z,1528923699.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:39.744Z,1528923699.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:40.134Z,1528923700.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:40.548Z,1528923700.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:40.944Z,1528923700.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:41.340Z,1528923701.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:41.738Z,1528923701.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:42.151Z,1528923702.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:42.548Z,1528923702.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:43.719Z,1528923703.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:43.892Z,1528923703.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:44.302Z,1528923704.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:44.694Z,1528923704.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:45.094Z,1528923705.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:45.493Z,1528923705.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:45.895Z,1528923705.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:46.285Z,1528923706.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:46.668Z,1528923706.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:47.168Z,1528923707.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:47.518Z,1528923707.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:49.219Z,1528923709.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:49.380Z,1528923709.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:49.790Z,1528923709.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:50.190Z,1528923710.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:50.568Z,1528923710.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:50.958Z,1528923710.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:51.362Z,1528923711.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:51.785Z,1528923711.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:52.187Z,1528923712.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:53.349Z,1528923713.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:53.503Z,1528923713.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:53.900Z,1528923713.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:54.305Z,1528923714.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:54.700Z,1528923714.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:55.098Z,1528923715.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:55.500Z,1528923715.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:55.914Z,1528923715.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:56.315Z,1528923716.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:57.470Z,1528923717.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:57.600Z,1528923717.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:58.023Z,1528923718.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:58.436Z,1528923718.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:58.823Z,1528923718.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:59.225Z,1528923719.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:01:59.629Z,1528923719.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:00.034Z,1528923720.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:00.428Z,1528923720.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:01.628Z,1528923721.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:01.784Z,1528923721.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:02.188Z,1528923722.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:02.585Z,1528923722.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:02.986Z,1528923722.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:03.380Z,1528923723.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:03.789Z,1528923723.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:04.198Z,1528923724.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:04.592Z,1528923724.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:05.759Z,1528923725.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:05.946Z,1528923725.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:06.340Z,1528923726.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:06.742Z,1528923726.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:07.140Z,1528923727.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:07.530Z,1528923727.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:07.942Z,1528923727.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:08.322Z,1528923728.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:08.722Z,1528923728.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:09.076Z,1528923729.076 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:02:09.157Z,1528923729.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:09.527Z,1528923729.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:10.717Z,1528923730.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:10.842Z,1528923730.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:11.265Z,1528923731.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:11.668Z,1528923731.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:12.063Z,1528923732.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:12.458Z,1528923732.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:12.859Z,1528923732.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:13.261Z,1528923733.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:13.659Z,1528923733.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:14.073Z,1528923734.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:14.459Z,1528923734.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:15.668Z,1528923735.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:15.823Z,1528923735.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:16.224Z,1528923736.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:16.623Z,1528923736.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:17.023Z,1528923737.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:17.421Z,1528923737.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:17.846Z,1528923737.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:18.196Z,1528923738.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:18.625Z,1528923738.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:19.792Z,1528923739.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:19.979Z,1528923739.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:20.374Z,1528923740.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:20.780Z,1528923740.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:21.180Z,1528923741.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:21.572Z,1528923741.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:21.955Z,1528923741.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:22.355Z,1528923742.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:22.760Z,1528923742.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:23.186Z,1528923743.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:23.567Z,1528923743.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:24.748Z,1528923744.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:24.883Z,1528923744.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:25.318Z,1528923745.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:25.707Z,1528923745.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:26.103Z,1528923746.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:26.480Z,1528923746.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:26.908Z,1528923746.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:27.281Z,1528923747.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:27.684Z,1528923747.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:28.114Z,1528923748.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:28.511Z,1528923748.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:29.736Z,1528923749.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:29.919Z,1528923749.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:30.320Z,1528923750.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:30.721Z,1528923750.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:31.113Z,1528923751.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:31.492Z,1528923751.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:31.920Z,1528923751.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:32.293Z,1528923752.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:32.697Z,1528923752.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:33.126Z,1528923753.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:33.521Z,1528923753.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:34.733Z,1528923754.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:34.860Z,1528923754.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:35.277Z,1528923755.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:35.680Z,1528923755.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:36.078Z,1528923756.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:36.474Z,1528923756.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:36.896Z,1528923756.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:37.272Z,1528923757.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:37.689Z,1528923757.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:38.836Z,1528923758.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:38.983Z,1528923758.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:39.330Z,1528923759.330 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T21:02:39.331Z,1528923759.331 [NAL9602] Data Fault, FailCount= 1
2018-06-13T21:02:39.331Z,1528923759.331 [NAL9602](ERROR): Data Fault
2018-06-13T21:02:39.365Z,1528923759.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:39.457Z,1528923759.457 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T21:02:39.730Z,1528923759.730 [NAL9602](INFO): Powering down
2018-06-13T21:02:39.772Z,1528923759.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:40.163Z,1528923760.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:40.567Z,1528923760.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:40.657Z,1528923760.657 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T21:02:40.657Z,1528923760.657 [NAL9602] No Fault, FailCount= 1
2018-06-13T21:02:40.967Z,1528923760.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:41.363Z,1528923761.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:41.768Z,1528923761.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:42.166Z,1528923762.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:42.565Z,1528923762.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:42.971Z,1528923762.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:43.366Z,1528923763.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:43.766Z,1528923763.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:44.167Z,1528923764.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:44.571Z,1528923764.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:44.971Z,1528923764.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:45.367Z,1528923765.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:45.767Z,1528923765.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:46.165Z,1528923766.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:46.568Z,1528923766.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:46.971Z,1528923766.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:47.365Z,1528923767.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:47.771Z,1528923767.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:48.166Z,1528923768.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:48.566Z,1528923768.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:48.971Z,1528923768.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:49.367Z,1528923769.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:49.765Z,1528923769.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:50.167Z,1528923770.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:50.567Z,1528923770.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:50.967Z,1528923770.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:51.367Z,1528923771.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:51.771Z,1528923771.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:52.165Z,1528923772.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:52.572Z,1528923772.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:52.966Z,1528923772.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:53.366Z,1528923773.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:53.771Z,1528923773.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:54.170Z,1528923774.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:54.566Z,1528923774.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:54.967Z,1528923774.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:55.367Z,1528923775.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:55.765Z,1528923775.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:56.167Z,1528923776.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:56.572Z,1528923776.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:56.967Z,1528923776.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:57.368Z,1528923777.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:57.767Z,1528923777.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:58.167Z,1528923778.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:58.569Z,1528923778.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:58.969Z,1528923778.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:59.366Z,1528923779.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:02:59.770Z,1528923779.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:00.170Z,1528923780.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:00.566Z,1528923780.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:00.971Z,1528923780.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:01.370Z,1528923781.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:01.883Z,1528923781.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:02.170Z,1528923782.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:02.609Z,1528923782.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:03.037Z,1528923783.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:03.379Z,1528923783.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:03.790Z,1528923783.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:04.168Z,1528923784.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:04.581Z,1528923784.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:04.985Z,1528923784.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:05.360Z,1528923785.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:05.785Z,1528923785.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:06.190Z,1528923786.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:06.561Z,1528923786.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:06.989Z,1528923786.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:07.364Z,1528923787.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:07.760Z,1528923787.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:08.192Z,1528923788.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:08.594Z,1528923788.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:08.924Z,1528923788.924 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:03:08.985Z,1528923788.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:09.364Z,1528923789.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:09.735Z,1528923789.735 [NAL9602](INFO): Powering up NAL9602
2018-06-13T21:03:09.770Z,1528923789.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:10.164Z,1528923790.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:10.568Z,1528923790.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:10.968Z,1528923790.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:11.369Z,1528923791.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:11.769Z,1528923791.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:12.167Z,1528923792.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:12.567Z,1528923792.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:12.969Z,1528923792.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:13.367Z,1528923793.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:13.767Z,1528923793.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:14.172Z,1528923794.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:14.576Z,1528923794.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:14.970Z,1528923794.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:15.372Z,1528923795.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:15.776Z,1528923795.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:16.168Z,1528923796.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:16.571Z,1528923796.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:16.969Z,1528923796.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:17.368Z,1528923797.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:17.772Z,1528923797.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:18.176Z,1528923798.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:18.568Z,1528923798.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:18.972Z,1528923798.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:19.369Z,1528923799.369 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:19.369Z,1528923799.369 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 351
2018-06-13T21:03:19.369Z,1528923799.369 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:03:19.371Z,1528923799.371 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:19.371Z,1528923799.371 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 351
2018-06-13T21:03:19.371Z,1528923799.371 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:03:19.373Z,1528923799.373 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:19.373Z,1528923799.373 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 351
2018-06-13T21:03:19.373Z,1528923799.373 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:03:19.449Z,1528923799.449 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:03:19.449Z,1528923799.449 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:03:19.449Z,1528923799.449 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:03:19.861Z,1528923799.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:03:19.861Z,1528923799.861 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 351
2018-06-13T21:03:19.862Z,1528923799.862 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:03:19.862Z,1528923799.862 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 351
2018-06-13T21:03:19.862Z,1528923799.862 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:03:19.862Z,1528923799.862 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 351
2018-06-13T21:03:20.202Z,1528923800.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:03:20.202Z,1528923800.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:03:20.203Z,1528923800.203 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:03:20.203Z,1528923800.203 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:03:20.203Z,1528923800.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:03:20.204Z,1528923800.204 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:03:20.204Z,1528923800.204 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:03:20.205Z,1528923800.205 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:03:20.205Z,1528923800.205 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:03:20.596Z,1528923800.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:03:20.620Z,1528923800.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:20.930Z,1528923800.930 [NAL9602](INFO): NAL9602 initialized
2018-06-13T21:03:21.017Z,1528923801.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:03:21.018Z,1528923801.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:21.423Z,1528923801.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T21:03:21.424Z,1528923801.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:21.785Z,1528923801.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T21:03:21.786Z,1528923801.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:22.180Z,1528923802.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T21:03:22.181Z,1528923802.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:22.580Z,1528923802.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T21:03:22.581Z,1528923802.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:22.985Z,1528923802.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T21:03:22.986Z,1528923802.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:23.373Z,1528923803.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T21:03:23.374Z,1528923803.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:23.772Z,1528923803.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T21:03:23.773Z,1528923803.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:24.200Z,1528923804.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T21:03:24.202Z,1528923804.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:24.588Z,1528923804.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T21:03:24.589Z,1528923804.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:25.776Z,1528923805.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T21:03:25.777Z,1528923805.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:25.937Z,1528923805.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T21:03:25.938Z,1528923805.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:26.334Z,1528923806.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T21:03:26.335Z,1528923806.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:26.738Z,1528923806.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T21:03:26.739Z,1528923806.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:27.132Z,1528923807.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T21:03:27.133Z,1528923807.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:27.530Z,1528923807.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T21:03:27.531Z,1528923807.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:27.936Z,1528923807.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T21:03:27.941Z,1528923807.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:28.354Z,1528923808.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T21:03:28.355Z,1528923808.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:28.736Z,1528923808.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T21:03:28.737Z,1528923808.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:29.895Z,1528923809.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T21:03:29.896Z,1528923809.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:30.039Z,1528923810.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T21:03:30.039Z,1528923810.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:30.443Z,1528923810.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T21:03:30.444Z,1528923810.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:30.840Z,1528923810.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T21:03:30.841Z,1528923810.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:31.248Z,1528923811.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T21:03:31.249Z,1528923811.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:31.637Z,1528923811.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T21:03:31.638Z,1528923811.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:32.048Z,1528923812.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-06-13T21:03:32.050Z,1528923812.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:32.442Z,1528923812.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-06-13T21:03:32.443Z,1528923812.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:33.680Z,1528923813.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-06-13T21:03:33.681Z,1528923813.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:33.837Z,1528923813.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T21:03:33.838Z,1528923813.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:34.248Z,1528923814.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T21:03:34.249Z,1528923814.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:34.636Z,1528923814.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T21:03:34.637Z,1528923814.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:35.040Z,1528923815.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T21:03:35.041Z,1528923815.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:35.438Z,1528923815.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T21:03:35.438Z,1528923815.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:35.839Z,1528923815.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T21:03:35.840Z,1528923815.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:36.250Z,1528923816.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T21:03:36.251Z,1528923816.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:36.689Z,1528923816.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T21:03:36.690Z,1528923816.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:38.584Z,1528923818.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T21:03:38.585Z,1528923818.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:38.747Z,1528923818.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T21:03:38.748Z,1528923818.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:39.143Z,1528923819.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T21:03:39.144Z,1528923819.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:39.548Z,1528923819.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:39.941Z,1528923819.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:40.336Z,1528923820.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:40.720Z,1528923820.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:41.150Z,1528923821.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:41.548Z,1528923821.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:42.712Z,1528923822.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:42.850Z,1528923822.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:43.251Z,1528923823.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:43.654Z,1528923823.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:44.057Z,1528923824.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:44.448Z,1528923824.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:44.850Z,1528923824.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:45.293Z,1528923825.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:45.636Z,1528923825.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:46.070Z,1528923826.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:47.219Z,1528923827.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:47.374Z,1528923827.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:47.779Z,1528923827.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:48.191Z,1528923828.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:48.580Z,1528923828.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:48.976Z,1528923828.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:49.370Z,1528923829.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:49.780Z,1528923829.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:50.190Z,1528923830.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:50.578Z,1528923830.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:51.825Z,1528923831.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:51.980Z,1528923831.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:52.378Z,1528923832.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:52.781Z,1528923832.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:53.178Z,1528923833.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:53.577Z,1528923833.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:53.981Z,1528923833.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:54.391Z,1528923834.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:54.778Z,1528923834.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:55.940Z,1528923835.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:56.087Z,1528923836.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:56.485Z,1528923836.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:56.886Z,1528923836.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:57.282Z,1528923837.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:57.683Z,1528923837.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:58.104Z,1528923838.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:58.486Z,1528923838.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:59.679Z,1528923839.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:03:59.810Z,1528923839.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:00.237Z,1528923840.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:00.650Z,1528923840.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:01.047Z,1528923841.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:01.441Z,1528923841.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:01.822Z,1528923841.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:02.251Z,1528923842.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:02.649Z,1528923842.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:03.898Z,1528923843.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:04.059Z,1528923844.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:04.458Z,1528923844.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:04.854Z,1528923844.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:05.264Z,1528923845.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:05.628Z,1528923845.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:06.050Z,1528923846.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:06.473Z,1528923846.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:06.860Z,1528923846.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:08.018Z,1528923848.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:08.172Z,1528923848.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:08.569Z,1528923848.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:08.983Z,1528923848.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:09.304Z,1528923849.304 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:04:09.372Z,1528923849.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:09.757Z,1528923849.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:10.167Z,1528923850.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:10.561Z,1528923850.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:10.965Z,1528923850.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:11.379Z,1528923851.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:11.816Z,1528923851.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:13.915Z,1528923853.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:14.072Z,1528923854.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:14.473Z,1528923854.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:14.878Z,1528923854.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:15.319Z,1528923855.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:15.673Z,1528923855.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:16.075Z,1528923856.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:16.487Z,1528923856.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:16.887Z,1528923856.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:18.038Z,1528923858.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:18.198Z,1528923858.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:18.590Z,1528923858.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:18.995Z,1528923858.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:19.399Z,1528923859.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:19.786Z,1528923859.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:20.188Z,1528923860.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:20.577Z,1528923860.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:20.996Z,1528923860.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:21.406Z,1528923861.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:21.810Z,1528923861.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:23.003Z,1528923863.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:23.143Z,1528923863.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:23.560Z,1528923863.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:23.961Z,1528923863.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:24.358Z,1528923864.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:24.756Z,1528923864.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:25.167Z,1528923865.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:25.532Z,1528923865.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:25.958Z,1528923865.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:27.156Z,1528923867.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:27.311Z,1528923867.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:27.710Z,1528923867.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:28.116Z,1528923868.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:28.506Z,1528923868.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:28.901Z,1528923868.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:29.288Z,1528923869.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:29.686Z,1528923869.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:30.089Z,1528923870.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:30.517Z,1528923870.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:30.911Z,1528923870.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:32.167Z,1528923872.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:32.290Z,1528923872.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:32.724Z,1528923872.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:33.128Z,1528923873.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:33.519Z,1528923873.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:33.893Z,1528923873.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:34.297Z,1528923874.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:34.697Z,1528923874.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:35.104Z,1528923875.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:35.528Z,1528923875.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:35.926Z,1528923875.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:37.144Z,1528923877.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:37.287Z,1528923877.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:37.685Z,1528923877.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:38.085Z,1528923878.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:38.482Z,1528923878.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:38.882Z,1528923878.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:39.279Z,1528923879.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:39.685Z,1528923879.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:40.086Z,1528923880.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:40.496Z,1528923880.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:40.886Z,1528923880.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:42.131Z,1528923882.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:42.269Z,1528923882.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:42.687Z,1528923882.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:43.091Z,1528923883.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:43.496Z,1528923883.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:43.864Z,1528923883.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:44.291Z,1528923884.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:44.667Z,1528923884.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:45.072Z,1528923885.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:45.498Z,1528923885.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:45.899Z,1528923885.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:48.415Z,1528923888.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:48.572Z,1528923888.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:48.963Z,1528923888.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:49.364Z,1528923889.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:49.764Z,1528923889.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:50.155Z,1528923890.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:50.558Z,1528923890.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:50.956Z,1528923890.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:51.376Z,1528923891.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:51.776Z,1528923891.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:52.961Z,1528923892.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:53.107Z,1528923893.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:53.515Z,1528923893.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:53.909Z,1528923893.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:54.306Z,1528923894.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:54.684Z,1528923894.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:55.085Z,1528923895.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:55.517Z,1528923895.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:55.909Z,1528923895.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:57.107Z,1528923897.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:57.267Z,1528923897.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:57.663Z,1528923897.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:58.066Z,1528923898.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:58.468Z,1528923898.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:58.840Z,1528923898.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:59.240Z,1528923899.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:04:59.644Z,1528923899.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:00.044Z,1528923900.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:00.475Z,1528923900.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:00.870Z,1528923900.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:02.025Z,1528923902.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:02.187Z,1528923902.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:02.579Z,1528923902.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:02.992Z,1528923902.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:03.382Z,1528923903.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:03.778Z,1528923903.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:04.190Z,1528923904.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:04.593Z,1528923904.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:04.989Z,1528923904.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:05.395Z,1528923905.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:06.551Z,1528923906.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:06.713Z,1528923906.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:07.118Z,1528923907.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:07.509Z,1528923907.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:07.907Z,1528923907.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:08.308Z,1528923908.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:08.708Z,1528923908.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:09.103Z,1528923909.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:09.447Z,1528923909.447 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:05:09.522Z,1528923909.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:09.910Z,1528923909.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:11.164Z,1528923911.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:11.315Z,1528923911.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:11.711Z,1528923911.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:12.113Z,1528923912.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:12.510Z,1528923912.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:12.905Z,1528923912.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:13.308Z,1528923913.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:13.709Z,1528923913.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:14.106Z,1528923914.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:14.517Z,1528923914.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:14.912Z,1528923914.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:16.122Z,1528923916.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:16.258Z,1528923916.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:16.666Z,1528923916.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:17.077Z,1528923917.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:17.473Z,1528923917.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:17.861Z,1528923917.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:18.268Z,1528923918.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:18.661Z,1528923918.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:19.045Z,1528923919.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:19.479Z,1528923919.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:19.875Z,1528923919.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:21.082Z,1528923921.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:21.225Z,1528923921.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:21.622Z,1528923921.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:22.026Z,1528923922.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:22.425Z,1528923922.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:22.822Z,1528923922.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:23.233Z,1528923923.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:23.609Z,1528923923.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:24.032Z,1528923924.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:25.193Z,1528923925.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:25.352Z,1528923925.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:25.738Z,1528923925.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:26.148Z,1528923926.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:26.541Z,1528923926.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:27.034Z,1528923927.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:27.382Z,1528923927.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:27.732Z,1528923927.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:28.203Z,1528923928.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:28.595Z,1528923928.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:28.943Z,1528923928.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:30.130Z,1528923930.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:30.289Z,1528923930.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:30.681Z,1528923930.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:31.088Z,1528923931.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:31.483Z,1528923931.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:31.887Z,1528923931.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:32.260Z,1528923932.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:32.664Z,1528923932.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:33.065Z,1528923933.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:33.500Z,1528923933.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:33.896Z,1528923933.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:35.311Z,1528923935.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:35.460Z,1528923935.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:35.864Z,1528923935.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:36.265Z,1528923936.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:36.658Z,1528923936.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:37.052Z,1528923937.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:37.451Z,1528923937.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:37.848Z,1528923937.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:38.267Z,1528923938.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:38.660Z,1528923938.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:39.871Z,1528923939.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:40.049Z,1528923940.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:40.447Z,1528923940.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:40.843Z,1528923940.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:41.254Z,1528923941.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:41.632Z,1528923941.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:42.029Z,1528923942.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:42.464Z,1528923942.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:42.859Z,1528923942.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:44.014Z,1528923944.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:44.167Z,1528923944.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:44.571Z,1528923944.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:44.963Z,1528923944.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:45.365Z,1528923945.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:45.760Z,1528923945.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:46.149Z,1528923946.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:46.568Z,1528923946.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:46.961Z,1528923946.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:48.402Z,1528923948.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:48.544Z,1528923948.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:48.949Z,1528923948.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:49.343Z,1528923949.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:49.745Z,1528923949.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:50.140Z,1528923950.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:50.521Z,1528923950.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:50.945Z,1528923950.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:51.362Z,1528923951.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:51.759Z,1528923951.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:52.967Z,1528923952.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:53.116Z,1528923953.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:53.519Z,1528923953.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:53.927Z,1528923953.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:54.327Z,1528923954.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:54.710Z,1528923954.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:55.114Z,1528923955.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:55.539Z,1528923955.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:55.930Z,1528923955.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:57.088Z,1528923957.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:57.211Z,1528923957.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:57.626Z,1528923957.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:58.030Z,1528923958.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:58.429Z,1528923958.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:58.829Z,1528923958.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:59.230Z,1528923959.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:05:59.642Z,1528923959.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:00.043Z,1528923960.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:01.207Z,1528923961.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:01.391Z,1528923961.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:01.790Z,1528923961.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:02.189Z,1528923962.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:02.595Z,1528923962.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:02.968Z,1528923962.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:03.372Z,1528923963.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:03.793Z,1528923963.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:04.176Z,1528923964.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:04.604Z,1528923964.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:04.999Z,1528923964.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:06.164Z,1528923966.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:06.315Z,1528923966.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:06.709Z,1528923966.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:07.113Z,1528923967.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:07.509Z,1528923967.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:07.906Z,1528923967.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:08.319Z,1528923968.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:08.684Z,1528923968.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:09.116Z,1528923969.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:10.279Z,1528923970.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:10.357Z,1528923970.357 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:06:10.410Z,1528923970.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:10.823Z,1528923970.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:11.225Z,1528923971.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:11.623Z,1528923971.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:12.019Z,1528923972.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:12.412Z,1528923972.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:12.814Z,1528923972.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:13.226Z,1528923973.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:13.636Z,1528923973.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:14.020Z,1528923974.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:15.217Z,1528923975.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:15.371Z,1528923975.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:15.772Z,1528923975.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:16.177Z,1528923976.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:16.570Z,1528923976.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:16.960Z,1528923976.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:17.362Z,1528923977.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:17.771Z,1528923977.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:18.171Z,1528923978.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:18.581Z,1528923978.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:18.971Z,1528923978.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:20.191Z,1528923980.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:20.371Z,1528923980.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:20.371Z,1528923980.371 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 352
2018-06-13T21:06:20.371Z,1528923980.371 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:06:20.373Z,1528923980.373 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:20.373Z,1528923980.373 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 352
2018-06-13T21:06:20.373Z,1528923980.373 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:06:20.375Z,1528923980.375 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:20.375Z,1528923980.375 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 352
2018-06-13T21:06:20.375Z,1528923980.375 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:06:20.457Z,1528923980.457 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:06:20.457Z,1528923980.457 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:06:20.458Z,1528923980.458 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:06:20.857Z,1528923980.857 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:06:20.857Z,1528923980.857 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 352
2018-06-13T21:06:20.858Z,1528923980.858 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:06:20.858Z,1528923980.858 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 352
2018-06-13T21:06:20.858Z,1528923980.858 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:06:20.858Z,1528923980.858 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 352
2018-06-13T21:06:21.179Z,1528923981.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:06:21.179Z,1528923981.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:06:21.179Z,1528923981.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:06:21.180Z,1528923981.180 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:06:21.180Z,1528923981.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:06:21.181Z,1528923981.181 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:06:21.181Z,1528923981.181 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:06:21.181Z,1528923981.181 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:06:21.182Z,1528923981.182 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:06:21.579Z,1528923981.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:06:21.580Z,1528923981.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:21.948Z,1528923981.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:06:21.965Z,1528923981.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:22.348Z,1528923982.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:06:22.349Z,1528923982.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:22.747Z,1528923982.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T21:06:22.748Z,1528923982.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:23.152Z,1528923983.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T21:06:23.153Z,1528923983.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:23.578Z,1528923983.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T21:06:23.579Z,1528923983.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:23.959Z,1528923983.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T21:06:23.960Z,1528923983.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:25.150Z,1528923985.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T21:06:25.151Z,1528923985.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:25.268Z,1528923985.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T21:06:25.277Z,1528923985.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:25.690Z,1528923985.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T21:06:25.691Z,1528923985.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:26.103Z,1528923986.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T21:06:26.104Z,1528923986.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:26.499Z,1528923986.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T21:06:26.500Z,1528923986.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:26.893Z,1528923986.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T21:06:26.894Z,1528923986.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:27.301Z,1528923987.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T21:06:27.302Z,1528923987.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:27.668Z,1528923987.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T21:06:27.669Z,1528923987.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:28.072Z,1528923988.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T21:06:28.073Z,1528923988.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:28.500Z,1528923988.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T21:06:28.501Z,1528923988.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:29.701Z,1528923989.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T21:06:29.702Z,1528923989.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:29.863Z,1528923989.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T21:06:29.864Z,1528923989.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:30.262Z,1528923990.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T21:06:30.262Z,1528923990.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:30.660Z,1528923990.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T21:06:30.665Z,1528923990.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:31.056Z,1528923991.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T21:06:31.057Z,1528923991.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:31.429Z,1528923991.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T21:06:31.430Z,1528923991.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:31.829Z,1528923991.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T21:06:31.830Z,1528923991.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:32.246Z,1528923992.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T21:06:32.247Z,1528923992.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:32.663Z,1528923992.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T21:06:32.664Z,1528923992.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:33.040Z,1528923993.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-06-13T21:06:33.040Z,1528923993.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:34.263Z,1528923994.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T21:06:34.264Z,1528923994.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:34.415Z,1528923994.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T21:06:34.416Z,1528923994.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:34.823Z,1528923994.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T21:06:34.824Z,1528923994.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:35.218Z,1528923995.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T21:06:35.219Z,1528923995.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:35.617Z,1528923995.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T21:06:35.618Z,1528923995.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:35.999Z,1528923995.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T21:06:36.000Z,1528923996.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:36.426Z,1528923996.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T21:06:36.427Z,1528923996.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:36.795Z,1528923996.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T21:06:36.796Z,1528923996.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:37.201Z,1528923997.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T21:06:37.202Z,1528923997.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:37.631Z,1528923997.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T21:06:37.632Z,1528923997.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:38.036Z,1528923998.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T21:06:38.037Z,1528923998.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:39.204Z,1528923999.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T21:06:39.205Z,1528923999.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:39.379Z,1528923999.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T21:06:39.380Z,1528923999.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:39.774Z,1528923999.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T21:06:39.775Z,1528923999.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:40.183Z,1528924000.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T21:06:40.184Z,1528924000.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:40.559Z,1528924000.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:40.952Z,1528924000.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:41.388Z,1528924001.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:41.750Z,1528924001.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:42.161Z,1528924002.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:43.332Z,1528924003.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:43.495Z,1528924003.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:43.893Z,1528924003.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:44.292Z,1528924004.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:44.696Z,1528924004.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:45.086Z,1528924005.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:45.495Z,1528924005.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:45.889Z,1528924005.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:46.289Z,1528924006.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:46.704Z,1528924006.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:47.096Z,1528924007.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:48.315Z,1528924008.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:48.469Z,1528924008.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:48.899Z,1528924008.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:49.302Z,1528924009.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:49.704Z,1528924009.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:50.091Z,1528924010.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:50.496Z,1528924010.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:50.881Z,1528924010.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:51.281Z,1528924011.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:51.712Z,1528924011.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:52.111Z,1528924012.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:53.332Z,1528924013.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:53.477Z,1528924013.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:53.880Z,1528924013.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:54.273Z,1528924014.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:54.673Z,1528924014.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:55.064Z,1528924015.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:55.466Z,1528924015.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:55.873Z,1528924015.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:56.274Z,1528924016.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:56.681Z,1528924016.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:57.080Z,1528924017.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:58.327Z,1528924018.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:58.471Z,1528924018.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:58.886Z,1528924018.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:59.290Z,1528924019.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:06:59.686Z,1528924019.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:00.080Z,1528924020.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:00.487Z,1528924020.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:00.883Z,1528924020.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:01.286Z,1528924021.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:01.698Z,1528924021.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:02.100Z,1528924022.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:03.309Z,1528924023.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:03.452Z,1528924023.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:03.854Z,1528924023.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:04.254Z,1528924024.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:04.654Z,1528924024.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:05.046Z,1528924025.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:05.448Z,1528924025.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:05.853Z,1528924025.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:06.251Z,1528924026.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:06.668Z,1528924026.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:07.057Z,1528924027.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:08.266Z,1528924028.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:08.420Z,1528924028.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:08.816Z,1528924028.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:09.213Z,1528924029.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:09.612Z,1528924029.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:10.000Z,1528924030.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:10.352Z,1528924030.352 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:07:10.420Z,1528924030.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:10.802Z,1528924030.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:11.213Z,1528924031.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:12.400Z,1528924032.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:12.523Z,1528924032.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:12.956Z,1528924032.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:13.339Z,1528924033.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:13.759Z,1528924033.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:14.132Z,1528924034.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:14.532Z,1528924034.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:14.932Z,1528924034.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:15.332Z,1528924035.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:15.763Z,1528924035.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:16.142Z,1528924036.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:17.331Z,1528924037.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:17.475Z,1528924037.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:17.873Z,1528924037.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:18.272Z,1528924038.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:18.674Z,1528924038.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:19.072Z,1528924039.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:19.469Z,1528924039.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:19.848Z,1528924039.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:20.275Z,1528924040.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:20.688Z,1528924040.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:21.076Z,1528924041.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:23.639Z,1528924043.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:23.763Z,1528924043.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:24.181Z,1528924044.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:24.582Z,1528924044.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:24.987Z,1528924044.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:25.376Z,1528924045.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:25.777Z,1528924045.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:26.157Z,1528924046.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:26.593Z,1528924046.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:26.990Z,1528924046.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:28.142Z,1528924048.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:28.296Z,1528924048.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:28.688Z,1528924048.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:29.092Z,1528924049.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:29.486Z,1528924049.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:29.892Z,1528924049.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:30.265Z,1528924050.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:30.696Z,1528924050.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:31.091Z,1528924051.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:31.500Z,1528924051.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:32.711Z,1528924052.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:32.860Z,1528924052.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:33.259Z,1528924053.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:33.659Z,1528924053.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:34.057Z,1528924054.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:34.448Z,1528924054.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:34.847Z,1528924054.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:35.248Z,1528924055.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:35.675Z,1528924055.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:36.060Z,1528924056.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:37.214Z,1528924057.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:37.359Z,1528924057.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:37.758Z,1528924057.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:38.149Z,1528924058.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:38.552Z,1528924058.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:38.952Z,1528924058.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:39.346Z,1528924059.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:39.779Z,1528924059.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:40.156Z,1528924060.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:40.555Z,1528924060.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:41.764Z,1528924061.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:41.940Z,1528924061.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:42.337Z,1528924062.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:42.742Z,1528924062.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:43.138Z,1528924063.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:43.528Z,1528924063.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:43.940Z,1528924063.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:44.333Z,1528924064.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:44.760Z,1528924064.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:45.141Z,1528924065.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:46.319Z,1528924066.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:46.498Z,1528924066.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:46.900Z,1528924066.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:47.294Z,1528924067.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:47.693Z,1528924067.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:48.093Z,1528924068.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:48.488Z,1528924068.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:48.872Z,1528924068.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:49.306Z,1528924069.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:49.710Z,1528924069.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:50.116Z,1528924070.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:51.264Z,1528924071.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:51.386Z,1528924071.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:51.805Z,1528924071.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:52.207Z,1528924072.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:52.612Z,1528924072.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:52.996Z,1528924072.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:53.405Z,1528924073.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:53.819Z,1528924073.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:54.208Z,1528924074.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:55.421Z,1528924075.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:55.564Z,1528924075.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:55.966Z,1528924075.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:56.376Z,1528924076.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:56.909Z,1528924076.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:57.329Z,1528924077.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:57.561Z,1528924077.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:58.030Z,1528924078.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:58.347Z,1528924078.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:58.794Z,1528924078.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:07:59.172Z,1528924079.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:00.542Z,1528924080.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:00.717Z,1528924080.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:01.123Z,1528924081.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:01.520Z,1528924081.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:01.919Z,1528924081.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:02.295Z,1528924082.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:02.695Z,1528924082.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:03.092Z,1528924083.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:03.532Z,1528924083.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:03.926Z,1528924083.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:05.077Z,1528924085.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:05.239Z,1528924085.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:05.625Z,1528924085.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:06.031Z,1528924086.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:06.425Z,1528924086.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:06.807Z,1528924086.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:07.205Z,1528924087.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:07.646Z,1528924087.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:08.009Z,1528924088.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:08.435Z,1528924088.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:09.611Z,1528924089.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:09.762Z,1528924089.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:10.159Z,1528924090.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:10.556Z,1528924090.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:10.892Z,1528924090.892 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:08:10.968Z,1528924090.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:11.336Z,1528924091.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:11.756Z,1528924091.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:12.156Z,1528924092.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:12.570Z,1528924092.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:12.971Z,1528924092.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:14.110Z,1528924094.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:14.251Z,1528924094.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:14.664Z,1528924094.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:15.062Z,1528924095.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:15.465Z,1528924095.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:15.858Z,1528924095.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:16.263Z,1528924096.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:16.669Z,1528924096.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:17.037Z,1528924097.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:17.464Z,1528924097.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:18.677Z,1528924098.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:18.839Z,1528924098.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:19.225Z,1528924099.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:19.620Z,1528924099.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:20.026Z,1528924100.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:20.412Z,1528924100.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:20.824Z,1528924100.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:21.216Z,1528924101.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:21.632Z,1528924101.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:22.026Z,1528924102.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:23.183Z,1528924103.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:23.360Z,1528924103.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:23.736Z,1528924103.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:24.136Z,1528924104.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:24.540Z,1528924104.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:24.932Z,1528924104.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:25.329Z,1528924105.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:25.747Z,1528924105.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:26.133Z,1528924106.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:26.541Z,1528924106.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:27.725Z,1528924107.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:27.868Z,1528924107.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:28.283Z,1528924108.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:28.683Z,1528924108.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:29.083Z,1528924109.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:29.477Z,1528924109.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:29.878Z,1528924109.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:30.262Z,1528924110.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:30.698Z,1528924110.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:31.096Z,1528924111.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:33.437Z,1528924113.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:33.596Z,1528924113.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:33.993Z,1528924113.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:34.398Z,1528924114.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:34.793Z,1528924114.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:35.189Z,1528924115.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:35.597Z,1528924115.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:35.969Z,1528924115.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:36.420Z,1528924116.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:36.801Z,1528924116.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:37.192Z,1528924117.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:38.365Z,1528924118.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:38.507Z,1528924118.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:38.909Z,1528924118.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:39.310Z,1528924119.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:39.711Z,1528924119.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:40.105Z,1528924120.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:40.522Z,1528924120.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:40.905Z,1528924120.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:41.292Z,1528924121.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:41.722Z,1528924121.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:42.868Z,1528924122.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:43.032Z,1528924123.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:43.421Z,1528924123.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:43.825Z,1528924123.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:44.228Z,1528924124.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:44.632Z,1528924124.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:45.017Z,1528924125.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:45.422Z,1528924125.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:45.836Z,1528924125.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:46.236Z,1528924126.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:47.434Z,1528924127.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:47.596Z,1528924127.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:48.000Z,1528924128.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:48.396Z,1528924128.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:48.794Z,1528924128.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:49.184Z,1528924129.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:49.587Z,1528924129.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:49.983Z,1528924129.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:50.383Z,1528924130.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:50.804Z,1528924130.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:51.193Z,1528924131.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:52.424Z,1528924132.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:52.584Z,1528924132.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:52.983Z,1528924132.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:53.385Z,1528924133.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:53.796Z,1528924133.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:54.182Z,1528924134.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:54.580Z,1528924134.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:54.978Z,1528924134.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:55.376Z,1528924135.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:55.798Z,1528924135.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:56.191Z,1528924136.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:57.391Z,1528924137.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:57.547Z,1528924137.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:57.945Z,1528924137.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:58.344Z,1528924138.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:58.747Z,1528924138.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:59.138Z,1528924139.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:59.560Z,1528924139.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:08:59.938Z,1528924139.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:00.349Z,1528924140.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:01.536Z,1528924141.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:01.695Z,1528924141.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:02.091Z,1528924142.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:02.490Z,1528924142.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:02.890Z,1528924142.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:03.276Z,1528924143.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:03.690Z,1528924143.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:04.069Z,1528924144.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:04.472Z,1528924144.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:04.899Z,1528924144.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:05.294Z,1528924145.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:06.463Z,1528924146.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:06.620Z,1528924146.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:07.020Z,1528924147.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:07.416Z,1528924147.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:07.814Z,1528924147.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:08.205Z,1528924148.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:08.603Z,1528924148.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:09.008Z,1528924149.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:09.405Z,1528924149.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:09.830Z,1528924149.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:10.215Z,1528924150.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:11.405Z,1528924151.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:11.498Z,1528924151.498 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:09:11.534Z,1528924151.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:11.963Z,1528924151.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:12.365Z,1528924152.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:12.766Z,1528924152.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:13.162Z,1528924153.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:13.574Z,1528924153.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:13.941Z,1528924153.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:14.371Z,1528924154.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:15.518Z,1528924155.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:15.676Z,1528924155.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:16.071Z,1528924156.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:16.480Z,1528924156.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:16.876Z,1528924156.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:17.269Z,1528924157.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:17.669Z,1528924157.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:18.054Z,1528924158.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:18.452Z,1528924158.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:18.884Z,1528924158.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:19.278Z,1528924159.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:20.448Z,1528924160.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:20.622Z,1528924160.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:20.000Z,1528924161.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:21.400Z,1528924161.400 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:21.400Z,1528924161.400 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 353
2018-06-13T21:09:21.400Z,1528924161.400 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:09:21.402Z,1528924161.402 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:21.402Z,1528924161.402 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 353
2018-06-13T21:09:21.402Z,1528924161.402 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:09:21.404Z,1528924161.404 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:21.404Z,1528924161.404 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 353
2018-06-13T21:09:21.404Z,1528924161.404 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:09:21.513Z,1528924161.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:09:21.513Z,1528924161.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:09:21.513Z,1528924161.513 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:09:21.877Z,1528924161.877 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:09:21.877Z,1528924161.877 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 353
2018-06-13T21:09:21.878Z,1528924161.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:09:21.878Z,1528924161.878 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 353
2018-06-13T21:09:21.878Z,1528924161.878 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:09:21.878Z,1528924161.878 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 353
2018-06-13T21:09:22.200Z,1528924162.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:09:22.201Z,1528924162.201 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:09:22.201Z,1528924162.201 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:09:22.202Z,1528924162.202 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:09:22.202Z,1528924162.202 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:09:22.203Z,1528924162.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:09:22.203Z,1528924162.203 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:09:22.203Z,1528924162.203 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:09:22.204Z,1528924162.204 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:09:22.631Z,1528924162.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:09:22.633Z,1528924162.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:22.985Z,1528924162.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:09:22.986Z,1528924162.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:23.388Z,1528924163.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:09:23.389Z,1528924163.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:23.815Z,1528924163.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T21:09:23.816Z,1528924163.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:24.973Z,1528924164.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T21:09:24.974Z,1528924164.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:25.115Z,1528924165.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T21:09:25.116Z,1528924165.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:25.521Z,1528924165.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T21:09:25.522Z,1528924165.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:25.922Z,1528924165.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T21:09:25.923Z,1528924165.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:26.321Z,1528924166.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T21:09:26.322Z,1528924166.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:26.724Z,1528924166.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T21:09:26.725Z,1528924166.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:27.118Z,1528924167.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T21:09:27.119Z,1528924167.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:27.513Z,1528924167.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T21:09:27.514Z,1528924167.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:27.929Z,1528924167.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T21:09:27.930Z,1528924167.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:28.322Z,1528924168.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T21:09:28.323Z,1528924168.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:29.518Z,1528924169.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T21:09:29.519Z,1528924169.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:29.676Z,1528924169.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T21:09:29.678Z,1528924169.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:30.076Z,1528924170.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T21:09:30.077Z,1528924170.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:30.470Z,1528924170.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T21:09:30.471Z,1528924170.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:30.870Z,1528924170.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T21:09:30.871Z,1528924170.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:31.248Z,1528924171.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T21:09:31.249Z,1528924171.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:31.676Z,1528924171.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T21:09:31.681Z,1528924171.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:32.051Z,1528924172.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T21:09:32.052Z,1528924172.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:32.452Z,1528924172.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T21:09:32.453Z,1528924172.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:32.883Z,1528924172.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T21:09:32.884Z,1528924172.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:33.285Z,1528924173.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T21:09:33.286Z,1528924173.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:34.438Z,1528924174.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T21:09:34.439Z,1528924174.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:34.600Z,1528924174.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T21:09:34.601Z,1528924174.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:34.994Z,1528924174.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T21:09:34.995Z,1528924174.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:35.394Z,1528924175.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T21:09:35.395Z,1528924175.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:35.792Z,1528924175.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T21:09:35.793Z,1528924175.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:36.187Z,1528924176.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T21:09:36.188Z,1528924176.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:36.604Z,1528924176.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T21:09:36.605Z,1528924176.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:36.982Z,1528924176.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T21:09:36.983Z,1528924176.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:37.394Z,1528924177.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T21:09:37.395Z,1528924177.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:38.545Z,1528924178.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T21:09:38.546Z,1528924178.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:38.698Z,1528924178.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T21:09:38.699Z,1528924178.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:39.116Z,1528924179.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T21:09:39.131Z,1528924179.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:39.530Z,1528924179.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T21:09:39.531Z,1528924179.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:39.906Z,1528924179.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T21:09:39.907Z,1528924179.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:40.296Z,1528924180.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T21:09:40.297Z,1528924180.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:40.708Z,1528924180.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T21:09:40.709Z,1528924180.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:41.098Z,1528924181.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T21:09:41.099Z,1528924181.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:41.504Z,1528924181.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:41.920Z,1528924181.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:42.324Z,1528924182.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:43.516Z,1528924183.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:43.676Z,1528924183.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:44.065Z,1528924184.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:44.472Z,1528924184.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:44.865Z,1528924184.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:45.266Z,1528924185.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:45.653Z,1528924185.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:46.055Z,1528924186.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:46.453Z,1528924186.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:46.872Z,1528924186.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:47.344Z,1528924187.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:49.155Z,1528924189.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:49.315Z,1528924189.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:49.709Z,1528924189.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:50.113Z,1528924190.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:50.510Z,1528924190.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:50.905Z,1528924190.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:51.308Z,1528924191.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:51.722Z,1528924191.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:52.118Z,1528924192.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:53.278Z,1528924193.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:53.435Z,1528924193.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:53.831Z,1528924193.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:54.236Z,1528924194.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:54.630Z,1528924194.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:55.029Z,1528924195.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:55.432Z,1528924195.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:55.843Z,1528924195.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:56.234Z,1528924196.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:57.479Z,1528924197.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:57.607Z,1528924197.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:58.040Z,1528924198.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:58.444Z,1528924198.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:58.838Z,1528924198.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:59.235Z,1528924199.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:09:59.647Z,1528924199.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:00.040Z,1528924200.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:01.211Z,1528924201.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:01.384Z,1528924201.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:01.783Z,1528924201.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:02.186Z,1528924202.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:02.588Z,1528924202.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:02.989Z,1528924202.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:03.386Z,1528924203.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:03.802Z,1528924203.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:04.191Z,1528924204.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:05.364Z,1528924205.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:05.523Z,1528924205.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:05.917Z,1528924205.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:06.316Z,1528924206.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:06.714Z,1528924206.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:07.103Z,1528924207.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:07.502Z,1528924207.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:07.919Z,1528924207.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:08.312Z,1528924208.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:09.549Z,1528924209.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:09.687Z,1528924209.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:10.108Z,1528924210.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:10.511Z,1528924210.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:10.907Z,1528924210.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:11.244Z,1528924211.244 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:10:11.307Z,1528924211.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:11.705Z,1528924211.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:12.081Z,1528924212.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:12.485Z,1528924212.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:12.917Z,1528924212.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:13.322Z,1528924213.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:14.529Z,1528924214.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:14.662Z,1528924214.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:15.070Z,1528924215.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:15.470Z,1528924215.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:15.870Z,1528924215.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:16.265Z,1528924216.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:16.677Z,1528924216.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:17.048Z,1528924217.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:17.474Z,1528924217.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:18.644Z,1528924218.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:18.795Z,1528924218.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:19.199Z,1528924219.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:19.604Z,1528924219.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:20.003Z,1528924220.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:20.390Z,1528924220.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:20.793Z,1528924220.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:21.191Z,1528924221.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:21.592Z,1528924221.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:22.023Z,1528924222.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:22.402Z,1528924222.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:23.600Z,1528924223.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:23.783Z,1528924223.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:24.181Z,1528924224.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:24.580Z,1528924224.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:24.975Z,1528924224.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:25.356Z,1528924225.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:25.755Z,1528924225.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:26.156Z,1528924226.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:26.597Z,1528924226.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:27.058Z,1528924227.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:27.478Z,1528924227.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:29.037Z,1528924229.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:29.196Z,1528924229.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:29.596Z,1528924229.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:29.996Z,1528924229.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:30.392Z,1528924230.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:30.792Z,1528924230.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:31.188Z,1528924231.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:31.571Z,1528924231.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:32.002Z,1528924232.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:32.402Z,1528924232.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:33.562Z,1528924233.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:33.704Z,1528924233.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:34.104Z,1528924234.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:34.512Z,1528924234.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:34.903Z,1528924234.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:35.293Z,1528924235.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:35.721Z,1528924235.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:36.084Z,1528924236.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:36.512Z,1528924236.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:36.912Z,1528924236.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:38.191Z,1528924238.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:38.371Z,1528924238.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:38.777Z,1528924238.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:39.170Z,1528924239.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:39.575Z,1528924239.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:39.964Z,1528924239.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:40.367Z,1528924240.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:40.783Z,1528924240.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:41.178Z,1528924241.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:42.381Z,1528924242.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:42.502Z,1528924242.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:42.921Z,1528924242.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:43.326Z,1528924243.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:43.724Z,1528924243.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:44.118Z,1528924244.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:44.519Z,1528924244.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:44.934Z,1528924244.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:45.328Z,1528924245.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:46.496Z,1528924246.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:46.672Z,1528924246.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:47.071Z,1528924247.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:47.472Z,1528924247.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:47.867Z,1528924247.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:48.247Z,1528924248.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:48.672Z,1528924248.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:49.076Z,1528924249.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:49.466Z,1528924249.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:50.634Z,1528924250.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:50.786Z,1528924250.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:51.177Z,1528924251.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:51.577Z,1528924251.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:51.975Z,1528924251.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:52.378Z,1528924252.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:52.776Z,1528924252.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:53.178Z,1528924253.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:53.572Z,1528924253.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:53.990Z,1528924253.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:54.379Z,1528924254.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:55.584Z,1528924255.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:55.730Z,1528924255.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:56.144Z,1528924256.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:56.544Z,1528924256.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:56.947Z,1528924256.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:57.340Z,1528924257.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:57.753Z,1528924257.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:58.140Z,1528924258.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:58.552Z,1528924258.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:59.698Z,1528924259.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:10:59.857Z,1528924259.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:00.275Z,1528924260.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:00.660Z,1528924260.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:01.055Z,1528924261.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:01.445Z,1528924261.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:01.918Z,1528924261.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:02.230Z,1528924262.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:02.838Z,1528924262.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:03.139Z,1528924263.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:03.464Z,1528924263.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:04.652Z,1528924264.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:04.808Z,1528924264.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:05.205Z,1528924265.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:05.597Z,1528924265.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:05.999Z,1528924265.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:06.446Z,1528924266.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:06.781Z,1528924266.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:07.180Z,1528924267.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:07.581Z,1528924267.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:08.018Z,1528924268.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:08.407Z,1528924268.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:09.574Z,1528924269.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:09.691Z,1528924269.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:10.124Z,1528924270.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:10.520Z,1528924270.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:10.924Z,1528924270.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:11.256Z,1528924271.256 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:11:11.321Z,1528924271.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:11.698Z,1528924271.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:12.132Z,1528924272.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:12.520Z,1528924272.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:13.732Z,1528924273.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:13.883Z,1528924273.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:14.277Z,1528924274.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:14.678Z,1528924274.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:15.087Z,1528924275.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:15.472Z,1528924275.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:15.879Z,1528924275.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:16.256Z,1528924276.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:16.682Z,1528924276.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:17.093Z,1528924277.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:17.479Z,1528924277.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:18.703Z,1528924278.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:18.861Z,1528924278.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:19.279Z,1528924279.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:19.685Z,1528924279.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:20.083Z,1528924280.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:20.468Z,1528924280.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:20.864Z,1528924280.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:21.263Z,1528924281.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:21.669Z,1528924281.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:22.093Z,1528924282.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:22.472Z,1528924282.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:23.740Z,1528924283.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:23.892Z,1528924283.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:24.287Z,1528924284.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:24.704Z,1528924284.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:25.091Z,1528924285.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:25.476Z,1528924285.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:25.872Z,1528924285.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:26.268Z,1528924286.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:26.673Z,1528924286.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:27.104Z,1528924287.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:27.487Z,1528924287.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:28.711Z,1528924288.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:28.851Z,1528924288.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:29.256Z,1528924289.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:29.674Z,1528924289.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:30.059Z,1528924290.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:30.451Z,1528924290.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:30.858Z,1528924290.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:31.229Z,1528924291.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:31.633Z,1528924291.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:32.076Z,1528924292.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:32.465Z,1528924292.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:33.672Z,1528924293.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:33.822Z,1528924293.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:34.239Z,1528924294.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:34.632Z,1528924294.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:35.043Z,1528924295.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:35.432Z,1528924295.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:35.835Z,1528924295.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:36.221Z,1528924296.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:36.745Z,1528924296.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:37.042Z,1528924297.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:37.436Z,1528924297.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:38.869Z,1528924298.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:38.998Z,1528924298.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:39.425Z,1528924299.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:39.831Z,1528924299.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:40.237Z,1528924300.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:40.625Z,1528924300.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:41.009Z,1528924301.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:41.410Z,1528924301.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:41.839Z,1528924301.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:42.238Z,1528924302.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:43.580Z,1528924303.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:43.715Z,1528924303.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:44.137Z,1528924304.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:44.541Z,1528924304.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:44.935Z,1528924304.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:45.316Z,1528924305.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:45.714Z,1528924305.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:46.145Z,1528924306.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:46.545Z,1528924306.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:47.699Z,1528924307.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:47.853Z,1528924307.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:48.261Z,1528924308.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:48.651Z,1528924308.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:49.056Z,1528924309.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:49.453Z,1528924309.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:49.825Z,1528924309.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:50.226Z,1528924310.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:50.629Z,1528924310.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:51.058Z,1528924311.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:51.461Z,1528924311.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:52.621Z,1528924312.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:52.775Z,1528924312.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:53.176Z,1528924313.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:53.571Z,1528924313.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:53.968Z,1528924313.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:54.344Z,1528924314.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:54.766Z,1528924314.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:55.179Z,1528924315.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:55.544Z,1528924315.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:55.975Z,1528924315.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:57.126Z,1528924317.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:57.280Z,1528924317.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:57.680Z,1528924317.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:58.085Z,1528924318.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:58.480Z,1528924318.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:58.873Z,1528924318.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:59.254Z,1528924319.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:11:59.670Z,1528924319.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:00.082Z,1528924320.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:00.484Z,1528924320.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:01.737Z,1528924321.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:01.892Z,1528924321.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:02.295Z,1528924322.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:02.696Z,1528924322.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:03.100Z,1528924323.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:03.472Z,1528924323.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:03.876Z,1528924323.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:04.293Z,1528924324.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:04.677Z,1528924324.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:05.105Z,1528924325.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:05.508Z,1528924325.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:06.728Z,1528924326.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:06.918Z,1528924326.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:07.311Z,1528924327.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:07.709Z,1528924327.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:08.143Z,1528924328.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:08.480Z,1528924328.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:08.884Z,1528924328.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:09.280Z,1528924329.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:09.684Z,1528924329.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:10.118Z,1528924330.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:10.512Z,1528924330.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:12.017Z,1528924332.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:12.106Z,1528924332.106 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:12:12.166Z,1528924332.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:12.581Z,1528924332.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:12.984Z,1528924332.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:13.374Z,1528924333.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:13.774Z,1528924333.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:14.152Z,1528924334.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:14.556Z,1528924334.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:14.985Z,1528924334.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:15.384Z,1528924335.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:16.730Z,1528924336.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:16.891Z,1528924336.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:17.300Z,1528924337.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:17.690Z,1528924337.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:18.085Z,1528924338.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:18.481Z,1528924338.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:18.894Z,1528924338.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:19.280Z,1528924339.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:19.696Z,1528924339.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:20.851Z,1528924340.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:20.987Z,1528924340.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:21.393Z,1528924341.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:21.793Z,1528924341.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:22.192Z,1528924342.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:22.585Z,1528924342.585 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:22.585Z,1528924342.585 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 354
2018-06-13T21:12:22.585Z,1528924342.585 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:12:22.587Z,1528924342.587 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:22.587Z,1528924342.587 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 354
2018-06-13T21:12:22.587Z,1528924342.587 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:12:22.589Z,1528924342.589 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:22.589Z,1528924342.589 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 354
2018-06-13T21:12:22.589Z,1528924342.589 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:12:22.663Z,1528924342.663 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:12:22.663Z,1528924342.663 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:12:22.663Z,1528924342.663 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:12:23.066Z,1528924343.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:12:23.066Z,1528924343.066 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 354
2018-06-13T21:12:23.066Z,1528924343.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:12:23.066Z,1528924343.066 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 354
2018-06-13T21:12:23.067Z,1528924343.067 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:12:23.067Z,1528924343.067 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 354
2018-06-13T21:12:23.392Z,1528924343.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:12:23.393Z,1528924343.393 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:12:23.393Z,1528924343.393 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:12:23.394Z,1528924343.394 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:12:23.394Z,1528924343.394 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:12:23.394Z,1528924343.394 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:12:23.395Z,1528924343.395 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:12:23.395Z,1528924343.395 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:12:23.395Z,1528924343.395 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:12:23.773Z,1528924343.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:12:23.774Z,1528924343.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:24.204Z,1528924344.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:12:24.205Z,1528924344.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:24.609Z,1528924344.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:12:24.610Z,1528924344.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:25.762Z,1528924345.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T21:12:25.763Z,1528924345.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:25.885Z,1528924345.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T21:12:25.886Z,1528924345.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:26.312Z,1528924346.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T21:12:26.313Z,1528924346.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:26.719Z,1528924346.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T21:12:26.720Z,1528924346.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:27.116Z,1528924347.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T21:12:27.118Z,1528924347.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:27.492Z,1528924347.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T21:12:27.506Z,1528924347.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:27.892Z,1528924347.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T21:12:27.893Z,1528924347.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:28.295Z,1528924348.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T21:12:28.296Z,1528924348.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:28.700Z,1528924348.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T21:12:28.701Z,1528924348.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:29.127Z,1528924349.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T21:12:29.128Z,1528924349.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:29.507Z,1528924349.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T21:12:29.508Z,1528924349.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:30.684Z,1528924350.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T21:12:30.685Z,1528924350.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:30.838Z,1528924350.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T21:12:30.839Z,1528924350.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:31.241Z,1528924351.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T21:12:31.242Z,1528924351.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:31.646Z,1528924351.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T21:12:31.647Z,1528924351.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:32.043Z,1528924352.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T21:12:32.044Z,1528924352.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:32.438Z,1528924352.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T21:12:32.439Z,1528924352.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:32.837Z,1528924352.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T21:12:32.838Z,1528924352.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:33.257Z,1528924353.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T21:12:33.258Z,1528924353.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:33.642Z,1528924353.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T21:12:33.643Z,1528924353.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:34.862Z,1528924354.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T21:12:34.863Z,1528924354.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:35.011Z,1528924355.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T21:12:35.012Z,1528924355.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:35.444Z,1528924355.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T21:12:35.445Z,1528924355.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:35.848Z,1528924355.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T21:12:35.849Z,1528924355.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:36.251Z,1528924356.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T21:12:36.252Z,1528924356.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:36.616Z,1528924356.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T21:12:36.618Z,1528924356.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:37.034Z,1528924357.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T21:12:37.035Z,1528924357.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:37.420Z,1528924357.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T21:12:37.421Z,1528924357.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:37.821Z,1528924357.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T21:12:37.822Z,1528924357.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:38.256Z,1528924358.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T21:12:38.257Z,1528924358.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:38.639Z,1528924358.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T21:12:38.640Z,1528924358.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:39.899Z,1528924359.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T21:12:39.900Z,1528924359.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:40.046Z,1528924360.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T21:12:40.047Z,1528924360.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:40.447Z,1528924360.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T21:12:40.448Z,1528924360.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:40.835Z,1528924360.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T21:12:40.836Z,1528924360.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:41.235Z,1528924361.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T21:12:41.236Z,1528924361.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:41.628Z,1528924361.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T21:12:41.629Z,1528924361.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:42.029Z,1528924362.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T21:12:42.030Z,1528924362.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:42.428Z,1528924362.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T21:12:42.429Z,1528924362.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:42.830Z,1528924362.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:43.256Z,1528924363.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:43.636Z,1528924363.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:44.864Z,1528924364.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:45.011Z,1528924365.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:45.422Z,1528924365.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:45.827Z,1528924365.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:46.224Z,1528924366.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:46.737Z,1528924366.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:47.023Z,1528924367.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:47.422Z,1528924367.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:47.826Z,1528924367.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:48.240Z,1528924368.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:48.631Z,1528924368.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:50.007Z,1528924370.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:50.186Z,1528924370.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:50.596Z,1528924370.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:50.987Z,1528924370.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:51.378Z,1528924371.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:51.777Z,1528924371.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:52.156Z,1528924372.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:52.556Z,1528924372.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:52.990Z,1528924372.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:53.366Z,1528924373.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:54.571Z,1528924374.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:54.749Z,1528924374.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:55.148Z,1528924375.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:55.551Z,1528924375.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:55.951Z,1528924375.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:56.345Z,1528924376.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:56.730Z,1528924376.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:57.153Z,1528924377.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:57.549Z,1528924377.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:58.710Z,1528924378.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:58.872Z,1528924378.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:59.276Z,1528924379.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:12:59.661Z,1528924379.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:00.068Z,1528924380.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:00.456Z,1528924380.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:00.860Z,1528924380.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:01.277Z,1528924381.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:01.669Z,1528924381.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:02.827Z,1528924382.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:03.005Z,1528924383.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:03.412Z,1528924383.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:03.788Z,1528924383.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:04.183Z,1528924384.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:04.584Z,1528924384.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:04.975Z,1528924384.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:05.374Z,1528924385.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:05.774Z,1528924385.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:06.217Z,1528924386.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:06.588Z,1528924386.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:07.766Z,1528924387.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:07.902Z,1528924387.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:08.321Z,1528924388.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:08.722Z,1528924388.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:09.129Z,1528924389.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:09.516Z,1528924389.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:09.934Z,1528924389.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:10.300Z,1528924390.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:10.724Z,1528924390.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:11.132Z,1528924391.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:12.343Z,1528924392.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:12.542Z,1528924392.542 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:13:12.614Z,1528924392.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:13.019Z,1528924393.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:13.413Z,1528924393.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:13.821Z,1528924393.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:14.203Z,1528924394.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:14.610Z,1528924394.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:15.020Z,1528924395.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:15.426Z,1528924395.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:16.607Z,1528924396.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:16.769Z,1528924396.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:17.160Z,1528924397.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:17.559Z,1528924397.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:17.964Z,1528924397.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:18.361Z,1528924398.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:18.757Z,1528924398.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:19.169Z,1528924399.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:19.565Z,1528924399.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:20.735Z,1528924400.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:20.916Z,1528924400.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:21.315Z,1528924401.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:21.705Z,1528924401.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:22.121Z,1528924402.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:22.489Z,1528924402.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:22.888Z,1528924402.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:23.311Z,1528924403.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:23.704Z,1528924403.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:24.886Z,1528924404.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:25.036Z,1528924405.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:25.382Z,1528924405.382 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T21:13:25.382Z,1528924405.382 [NAL9602] Data Fault, FailCount= 2
2018-06-13T21:13:25.383Z,1528924405.383 [NAL9602](ERROR): Data Fault
2018-06-13T21:13:25.449Z,1528924405.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:25.533Z,1528924405.533 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T21:13:25.778Z,1528924405.778 [NAL9602](INFO): Powering down
2018-06-13T21:13:25.850Z,1528924405.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:26.242Z,1528924406.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:26.684Z,1528924406.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:26.769Z,1528924406.769 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T21:13:26.769Z,1528924406.769 [NAL9602] No Fault, FailCount= 2
2018-06-13T21:13:27.035Z,1528924407.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:27.445Z,1528924407.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:27.838Z,1528924407.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:28.223Z,1528924408.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:28.620Z,1528924408.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:29.022Z,1528924409.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:29.424Z,1528924409.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:29.822Z,1528924409.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:30.221Z,1528924410.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:30.620Z,1528924410.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:31.028Z,1528924411.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:31.419Z,1528924411.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:31.820Z,1528924411.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:32.224Z,1528924412.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:32.622Z,1528924412.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:33.020Z,1528924413.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:33.424Z,1528924413.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:33.820Z,1528924413.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:34.232Z,1528924414.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:34.623Z,1528924414.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:35.024Z,1528924415.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:35.419Z,1528924415.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:35.845Z,1528924415.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:36.224Z,1528924416.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:36.625Z,1528924416.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:37.025Z,1528924417.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:37.420Z,1528924417.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:37.820Z,1528924417.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:38.231Z,1528924418.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:38.631Z,1528924418.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:39.021Z,1528924419.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:39.426Z,1528924419.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:39.828Z,1528924419.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:40.228Z,1528924420.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:40.626Z,1528924420.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:41.024Z,1528924421.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:41.436Z,1528924421.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:41.828Z,1528924421.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:42.226Z,1528924422.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:42.625Z,1528924422.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:43.028Z,1528924423.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:43.427Z,1528924423.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:43.825Z,1528924423.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:44.227Z,1528924424.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:44.626Z,1528924424.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:45.025Z,1528924425.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:45.429Z,1528924425.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:45.826Z,1528924425.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:46.226Z,1528924426.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:46.628Z,1528924426.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:47.026Z,1528924427.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:47.425Z,1528924427.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:47.827Z,1528924427.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:48.227Z,1528924428.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:48.625Z,1528924428.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:49.028Z,1528924429.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:49.426Z,1528924429.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:49.825Z,1528924429.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:50.228Z,1528924430.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:50.626Z,1528924430.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:51.027Z,1528924431.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:51.428Z,1528924431.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:51.826Z,1528924431.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:52.228Z,1528924432.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:52.628Z,1528924432.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:53.026Z,1528924433.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:53.428Z,1528924433.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:53.828Z,1528924433.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:54.227Z,1528924434.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:54.628Z,1528924434.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:55.028Z,1528924435.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:55.426Z,1528924435.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:55.786Z,1528924435.786 [NAL9602](INFO): Powering up NAL9602
2018-06-13T21:13:55.836Z,1528924435.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:56.229Z,1528924436.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:56.634Z,1528924436.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:57.028Z,1528924437.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:57.428Z,1528924437.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:57.826Z,1528924437.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:58.228Z,1528924438.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:58.625Z,1528924438.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:59.026Z,1528924439.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:59.429Z,1528924439.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:13:59.825Z,1528924439.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:00.226Z,1528924440.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:00.636Z,1528924440.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:01.025Z,1528924441.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:01.426Z,1528924441.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:01.970Z,1528924441.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:02.228Z,1528924442.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:02.625Z,1528924442.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:03.130Z,1528924443.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:03.489Z,1528924443.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:03.898Z,1528924443.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:04.230Z,1528924444.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:04.630Z,1528924444.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:05.035Z,1528924445.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:05.428Z,1528924445.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:05.828Z,1528924445.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:06.236Z,1528924446.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:06.639Z,1528924446.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:06.986Z,1528924446.986 [NAL9602](INFO): NAL9602 initialized
2018-06-13T21:14:07.042Z,1528924447.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:07.436Z,1528924447.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:07.843Z,1528924447.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:08.240Z,1528924448.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:08.640Z,1528924448.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:09.026Z,1528924449.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:09.439Z,1528924449.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:09.835Z,1528924449.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:10.251Z,1528924450.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:10.648Z,1528924450.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:11.816Z,1528924451.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:11.932Z,1528924451.932 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:14:11.969Z,1528924451.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:12.396Z,1528924452.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:12.794Z,1528924452.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:13.195Z,1528924453.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:13.572Z,1528924453.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:13.972Z,1528924453.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:14.402Z,1528924454.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:14.800Z,1528924454.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:15.954Z,1528924455.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:16.111Z,1528924456.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:16.509Z,1528924456.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:16.909Z,1528924456.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:17.306Z,1528924457.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:17.702Z,1528924457.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:18.117Z,1528924458.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:18.511Z,1528924458.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:19.700Z,1528924459.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:19.855Z,1528924459.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:20.257Z,1528924460.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:20.654Z,1528924460.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:21.055Z,1528924461.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:21.445Z,1528924461.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:21.850Z,1528924461.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:22.271Z,1528924462.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:22.656Z,1528924462.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:23.859Z,1528924463.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:24.014Z,1528924464.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:24.412Z,1528924464.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:24.814Z,1528924464.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:25.211Z,1528924465.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:25.608Z,1528924465.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:26.012Z,1528924466.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:26.423Z,1528924466.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:26.816Z,1528924466.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:27.972Z,1528924467.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:28.119Z,1528924468.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:28.513Z,1528924468.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:28.917Z,1528924468.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:29.314Z,1528924469.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:29.712Z,1528924469.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:30.125Z,1528924470.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:30.503Z,1528924470.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:30.918Z,1528924470.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:32.113Z,1528924472.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:32.271Z,1528924472.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:32.666Z,1528924472.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:33.064Z,1528924473.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:33.466Z,1528924473.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:33.869Z,1528924473.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:34.272Z,1528924474.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:34.662Z,1528924474.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:35.068Z,1528924475.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:35.477Z,1528924475.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:35.876Z,1528924475.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:37.820Z,1528924477.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:37.951Z,1528924477.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:38.380Z,1528924478.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:38.785Z,1528924478.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:39.183Z,1528924479.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:39.559Z,1528924479.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:39.980Z,1528924479.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:40.388Z,1528924480.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:40.785Z,1528924480.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:41.987Z,1528924481.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:42.127Z,1528924482.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:42.544Z,1528924482.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:42.947Z,1528924482.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:43.344Z,1528924483.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:43.739Z,1528924483.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:44.150Z,1528924484.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:44.517Z,1528924484.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:44.944Z,1528924484.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:46.146Z,1528924486.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:46.303Z,1528924486.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:46.700Z,1528924486.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:47.101Z,1528924487.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:47.500Z,1528924487.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:47.884Z,1528924487.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:48.307Z,1528924488.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:48.681Z,1528924488.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:49.101Z,1528924489.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:49.515Z,1528924489.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:49.903Z,1528924489.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:51.121Z,1528924491.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:51.259Z,1528924491.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:51.672Z,1528924491.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:52.076Z,1528924492.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:52.472Z,1528924492.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:52.865Z,1528924492.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:53.266Z,1528924493.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:53.641Z,1528924493.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:54.069Z,1528924494.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:54.473Z,1528924494.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:54.872Z,1528924494.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:56.118Z,1528924496.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:56.280Z,1528924496.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:56.680Z,1528924496.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:57.090Z,1528924497.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:57.477Z,1528924497.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:57.879Z,1528924497.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:58.274Z,1528924498.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:58.651Z,1528924498.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:59.056Z,1528924499.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:59.487Z,1528924499.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:14:59.894Z,1528924499.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:01.099Z,1528924501.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:01.256Z,1528924501.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:01.680Z,1528924501.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:02.081Z,1528924502.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:02.479Z,1528924502.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:02.855Z,1528924502.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:03.252Z,1528924503.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:03.653Z,1528924503.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:04.060Z,1528924504.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:04.492Z,1528924504.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:04.863Z,1528924504.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:06.094Z,1528924506.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:06.243Z,1528924506.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:06.644Z,1528924506.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:07.040Z,1528924507.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:07.451Z,1528924507.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:07.839Z,1528924507.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:08.239Z,1528924508.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:08.633Z,1528924508.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:09.018Z,1528924509.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:09.448Z,1528924509.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:09.839Z,1528924509.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:11.043Z,1528924511.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:11.216Z,1528924511.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:11.651Z,1528924511.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:12.023Z,1528924512.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:12.336Z,1528924512.336 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:15:12.464Z,1528924512.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:12.844Z,1528924512.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:13.238Z,1528924513.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:13.596Z,1528924513.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:14.001Z,1528924514.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:15.195Z,1528924515.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:15.325Z,1528924515.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:15.743Z,1528924515.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:16.146Z,1528924516.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:16.547Z,1528924516.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:16.936Z,1528924516.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:17.324Z,1528924517.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:17.721Z,1528924517.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:18.125Z,1528924518.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:18.558Z,1528924518.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:18.959Z,1528924518.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:20.143Z,1528924520.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:20.287Z,1528924520.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:20.685Z,1528924520.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:21.082Z,1528924521.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:21.485Z,1528924521.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:21.884Z,1528924521.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:22.281Z,1528924522.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:22.685Z,1528924522.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:23.066Z,1528924523.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:23.497Z,1528924523.497 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:23.497Z,1528924523.497 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 355
2018-06-13T21:15:23.497Z,1528924523.497 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:15:23.499Z,1528924523.499 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:23.499Z,1528924523.499 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 355
2018-06-13T21:15:23.499Z,1528924523.499 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:15:23.501Z,1528924523.501 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:23.501Z,1528924523.501 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 355
2018-06-13T21:15:23.501Z,1528924523.501 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:15:23.581Z,1528924523.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:15:23.581Z,1528924523.581 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:15:23.582Z,1528924523.582 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:15:23.974Z,1528924523.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:15:23.974Z,1528924523.974 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 355
2018-06-13T21:15:23.975Z,1528924523.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:15:23.975Z,1528924523.975 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 355
2018-06-13T21:15:23.975Z,1528924523.975 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:15:23.975Z,1528924523.975 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 355
2018-06-13T21:15:25.088Z,1528924525.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:15:25.088Z,1528924525.088 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:15:25.089Z,1528924525.089 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:15:25.089Z,1528924525.089 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:15:25.090Z,1528924525.090 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:15:25.090Z,1528924525.090 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:15:25.090Z,1528924525.090 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:15:25.091Z,1528924525.091 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:15:25.091Z,1528924525.091 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:15:25.239Z,1528924525.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T21:15:25.240Z,1528924525.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:25.635Z,1528924525.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T21:15:25.636Z,1528924525.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:26.033Z,1528924526.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T21:15:26.034Z,1528924526.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:26.430Z,1528924526.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T21:15:26.431Z,1528924526.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:26.856Z,1528924526.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T21:15:26.858Z,1528924526.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:27.258Z,1528924527.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T21:15:27.258Z,1528924527.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:27.640Z,1528924527.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T21:15:27.640Z,1528924527.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:28.058Z,1528924528.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T21:15:28.059Z,1528924528.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:29.237Z,1528924529.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T21:15:29.238Z,1528924529.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:29.419Z,1528924529.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T21:15:29.420Z,1528924529.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:29.818Z,1528924529.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T21:15:29.819Z,1528924529.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:30.220Z,1528924530.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T21:15:30.221Z,1528924530.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:30.620Z,1528924530.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T21:15:30.622Z,1528924530.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:30.990Z,1528924530.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T21:15:30.991Z,1528924530.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:31.419Z,1528924531.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T21:15:31.420Z,1528924531.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:31.787Z,1528924531.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T21:15:31.788Z,1528924531.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:32.224Z,1528924532.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T21:15:32.226Z,1528924532.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:32.627Z,1528924532.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T21:15:32.627Z,1528924532.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:33.775Z,1528924533.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T21:15:33.776Z,1528924533.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:33.924Z,1528924533.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T21:15:33.925Z,1528924533.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:34.332Z,1528924534.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T21:15:34.333Z,1528924534.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:34.729Z,1528924534.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T21:15:34.730Z,1528924534.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:35.122Z,1528924535.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T21:15:35.123Z,1528924535.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:35.504Z,1528924535.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T21:15:35.521Z,1528924535.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:35.905Z,1528924535.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T21:15:35.906Z,1528924535.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:36.337Z,1528924536.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T21:15:36.338Z,1528924536.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:36.731Z,1528924536.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T21:15:36.732Z,1528924536.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:37.904Z,1528924537.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T21:15:37.905Z,1528924537.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:38.079Z,1528924538.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T21:15:38.080Z,1528924538.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:38.480Z,1528924538.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T21:15:38.481Z,1528924538.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:38.877Z,1528924538.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T21:15:38.878Z,1528924538.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:39.279Z,1528924539.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T21:15:39.280Z,1528924539.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:39.674Z,1528924539.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T21:15:39.675Z,1528924539.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:40.058Z,1528924540.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T21:15:40.059Z,1528924540.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:40.482Z,1528924540.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T21:15:40.483Z,1528924540.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:40.861Z,1528924540.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T21:15:40.862Z,1528924540.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:42.034Z,1528924542.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T21:15:42.036Z,1528924542.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:42.184Z,1528924542.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T21:15:42.185Z,1528924542.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:42.582Z,1528924542.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T21:15:42.583Z,1528924542.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:42.979Z,1528924542.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T21:15:42.980Z,1528924542.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:43.380Z,1528924543.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T21:15:43.382Z,1528924543.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:43.764Z,1528924543.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:44.161Z,1528924544.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:44.593Z,1528924544.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:44.961Z,1528924544.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:45.389Z,1528924545.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:46.559Z,1528924546.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:46.737Z,1528924546.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:47.142Z,1528924547.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:47.541Z,1528924547.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:47.939Z,1528924547.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:48.316Z,1528924548.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:48.716Z,1528924548.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:49.116Z,1528924549.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:49.548Z,1528924549.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:49.946Z,1528924549.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:51.139Z,1528924551.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:51.299Z,1528924551.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:51.697Z,1528924551.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:52.188Z,1528924552.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:52.521Z,1528924552.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:53.029Z,1528924553.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:53.284Z,1528924553.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:53.688Z,1528924553.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:54.107Z,1528924554.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:54.520Z,1528924554.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:54.895Z,1528924554.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:56.168Z,1528924556.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:56.327Z,1528924556.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:56.721Z,1528924556.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:57.126Z,1528924557.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:57.526Z,1528924557.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:57.918Z,1528924557.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:58.319Z,1528924558.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:58.708Z,1528924558.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:59.125Z,1528924559.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:59.530Z,1528924559.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:15:59.936Z,1528924559.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:01.133Z,1528924561.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:01.287Z,1528924561.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:01.692Z,1528924561.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:02.100Z,1528924562.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:02.487Z,1528924562.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:02.881Z,1528924562.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:03.294Z,1528924563.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:03.675Z,1528924563.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:04.089Z,1528924564.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:05.255Z,1528924565.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:05.404Z,1528924565.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:05.837Z,1528924565.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:06.237Z,1528924566.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:06.640Z,1528924566.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:07.030Z,1528924567.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:07.434Z,1528924567.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:07.811Z,1528924567.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:08.216Z,1528924568.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:08.652Z,1528924568.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:09.042Z,1528924569.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:10.205Z,1528924570.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:10.364Z,1528924570.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:10.754Z,1528924570.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:11.153Z,1528924571.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:11.554Z,1528924571.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:11.940Z,1528924571.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:12.292Z,1528924572.292 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:16:12.356Z,1528924572.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:12.747Z,1528924572.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:13.146Z,1528924573.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:13.561Z,1528924573.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:13.956Z,1528924573.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:15.146Z,1528924575.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:15.303Z,1528924575.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:15.699Z,1528924575.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:16.109Z,1528924576.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:16.518Z,1528924576.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:16.903Z,1528924576.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:17.313Z,1528924577.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:17.703Z,1528924577.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:18.100Z,1528924578.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:19.263Z,1528924579.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:19.402Z,1528924579.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:19.809Z,1528924579.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:20.220Z,1528924580.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:20.611Z,1528924580.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:21.001Z,1528924581.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:21.403Z,1528924581.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:21.798Z,1528924581.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:22.202Z,1528924582.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:22.624Z,1528924582.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:23.014Z,1528924583.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:24.241Z,1528924584.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:24.420Z,1528924584.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:24.808Z,1528924584.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:25.213Z,1528924585.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:25.600Z,1528924585.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:26.004Z,1528924586.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:26.382Z,1528924586.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:26.776Z,1528924586.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:27.212Z,1528924587.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:27.613Z,1528924587.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:28.011Z,1528924588.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:29.223Z,1528924589.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:29.358Z,1528924589.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:29.770Z,1528924589.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:30.173Z,1528924590.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:30.570Z,1528924590.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:30.966Z,1528924590.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:31.367Z,1528924591.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:31.792Z,1528924591.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:32.171Z,1528924592.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:32.584Z,1528924592.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:32.978Z,1528924592.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:34.317Z,1528924594.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:34.478Z,1528924594.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:34.871Z,1528924594.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:35.272Z,1528924595.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:35.671Z,1528924595.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:36.065Z,1528924596.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:36.471Z,1528924596.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:36.845Z,1528924596.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:37.262Z,1528924597.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:37.681Z,1528924597.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:38.071Z,1528924598.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:39.274Z,1528924599.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:39.431Z,1528924599.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:39.834Z,1528924599.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:40.234Z,1528924600.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:40.635Z,1528924600.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:41.034Z,1528924601.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:41.432Z,1528924601.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:41.834Z,1528924601.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:42.234Z,1528924602.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:42.646Z,1528924602.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:43.041Z,1528924603.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:44.288Z,1528924604.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:44.444Z,1528924604.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:44.845Z,1528924604.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:45.244Z,1528924605.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:45.646Z,1528924605.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:46.036Z,1528924606.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:46.446Z,1528924606.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:46.842Z,1528924606.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:47.253Z,1528924607.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:47.653Z,1528924607.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:48.052Z,1528924608.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:49.264Z,1528924609.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:49.392Z,1528924609.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:49.810Z,1528924609.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:50.209Z,1528924610.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:50.610Z,1528924610.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:51.000Z,1528924611.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:51.403Z,1528924611.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:51.808Z,1528924611.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:52.206Z,1528924612.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:52.621Z,1528924612.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:53.011Z,1528924613.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:54.258Z,1528924614.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:54.424Z,1528924614.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:54.828Z,1528924614.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:55.224Z,1528924615.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:55.624Z,1528924615.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:56.014Z,1528924616.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:56.411Z,1528924616.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:56.812Z,1528924616.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:57.216Z,1528924617.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:57.635Z,1528924617.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:58.026Z,1528924618.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:59.265Z,1528924619.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:59.419Z,1528924619.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:16:59.833Z,1528924619.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:00.231Z,1528924620.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:00.630Z,1528924620.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:01.020Z,1528924621.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:01.428Z,1528924621.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:01.829Z,1528924621.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:02.223Z,1528924622.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:02.641Z,1528924622.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:03.034Z,1528924623.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:04.270Z,1528924624.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:04.433Z,1528924624.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:04.826Z,1528924624.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:05.232Z,1528924625.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:05.627Z,1528924625.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:06.029Z,1528924626.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:06.424Z,1528924626.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:06.937Z,1528924626.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:07.222Z,1528924627.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:07.633Z,1528924627.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:08.031Z,1528924628.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:09.343Z,1528924629.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:09.486Z,1528924629.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:09.893Z,1528924629.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:10.294Z,1528924630.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:10.694Z,1528924630.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:11.088Z,1528924631.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:11.488Z,1528924631.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:11.881Z,1528924631.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:12.232Z,1528924632.232 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:17:12.289Z,1528924632.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:12.700Z,1528924632.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:13.092Z,1528924633.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:14.303Z,1528924634.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:14.482Z,1528924634.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:14.884Z,1528924634.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:15.288Z,1528924635.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:15.679Z,1528924635.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:16.073Z,1528924636.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:16.457Z,1528924636.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:16.858Z,1528924636.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:17.272Z,1528924637.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:17.688Z,1528924637.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:18.086Z,1528924638.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:19.307Z,1528924639.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:19.460Z,1528924639.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:19.860Z,1528924639.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:20.263Z,1528924640.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:20.663Z,1528924640.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:21.054Z,1528924641.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:21.452Z,1528924641.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:21.853Z,1528924641.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:22.254Z,1528924642.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:22.682Z,1528924642.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:23.059Z,1528924643.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:24.292Z,1528924644.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:24.447Z,1528924644.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:24.844Z,1528924644.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:25.244Z,1528924645.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:25.647Z,1528924645.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:26.040Z,1528924646.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:26.444Z,1528924646.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:26.840Z,1528924646.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:27.241Z,1528924647.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:27.653Z,1528924647.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:28.059Z,1528924648.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:29.272Z,1528924649.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:29.425Z,1528924649.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:29.860Z,1528924649.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:30.260Z,1528924650.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:30.654Z,1528924650.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:31.031Z,1528924651.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:31.433Z,1528924651.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:31.863Z,1528924651.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:32.263Z,1528924652.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:32.662Z,1528924652.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:33.055Z,1528924653.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:34.283Z,1528924654.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:34.432Z,1528924654.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:34.831Z,1528924654.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:35.231Z,1528924655.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:35.630Z,1528924655.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:36.028Z,1528924656.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:36.439Z,1528924656.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:36.825Z,1528924656.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:37.234Z,1528924657.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:38.422Z,1528924658.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:38.579Z,1528924658.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:38.984Z,1528924658.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:39.376Z,1528924659.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:39.774Z,1528924659.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:40.170Z,1528924660.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:40.571Z,1528924660.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:40.970Z,1528924660.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:41.374Z,1528924661.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:41.783Z,1528924661.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:42.242Z,1528924662.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:43.925Z,1528924663.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:44.080Z,1528924664.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:44.484Z,1528924664.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:44.884Z,1528924664.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:45.289Z,1528924665.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:45.678Z,1528924665.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:46.074Z,1528924666.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:46.496Z,1528924666.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:46.904Z,1528924666.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:48.055Z,1528924668.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:48.231Z,1528924668.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:48.633Z,1528924668.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:49.038Z,1528924669.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:49.444Z,1528924669.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:49.825Z,1528924669.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:50.210Z,1528924670.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:50.643Z,1528924670.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:51.040Z,1528924671.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:52.212Z,1528924672.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:52.364Z,1528924672.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:52.787Z,1528924672.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:53.190Z,1528924673.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:53.587Z,1528924673.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:53.964Z,1528924673.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:54.359Z,1528924674.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:54.791Z,1528924674.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:55.194Z,1528924675.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:56.392Z,1528924676.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:56.551Z,1528924676.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:56.950Z,1528924676.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:57.350Z,1528924677.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:57.751Z,1528924677.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:58.144Z,1528924678.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:58.528Z,1528924678.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:58.928Z,1528924678.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:59.333Z,1528924679.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:17:59.764Z,1528924679.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:00.157Z,1528924680.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:01.365Z,1528924681.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:01.523Z,1528924681.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:01.932Z,1528924681.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:02.329Z,1528924682.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:02.732Z,1528924682.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:03.116Z,1528924683.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:03.519Z,1528924683.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:03.920Z,1528924683.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:04.324Z,1528924684.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:04.736Z,1528924684.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:05.130Z,1528924685.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:06.326Z,1528924686.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:06.475Z,1528924686.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:06.871Z,1528924686.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:07.270Z,1528924687.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:07.670Z,1528924687.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:08.068Z,1528924688.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:08.477Z,1528924688.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:08.846Z,1528924688.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:09.273Z,1528924689.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:10.433Z,1528924690.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:10.592Z,1528924690.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:10.984Z,1528924690.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:11.384Z,1528924691.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:11.782Z,1528924691.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:12.182Z,1528924692.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:12.520Z,1528924692.520 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:18:12.584Z,1528924692.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:12.976Z,1528924692.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:13.382Z,1528924693.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:13.790Z,1528924693.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:14.185Z,1528924694.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:15.360Z,1528924695.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:15.510Z,1528924695.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:15.935Z,1528924695.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:16.340Z,1528924696.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:16.799Z,1528924696.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:17.183Z,1528924697.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:17.515Z,1528924697.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:17.945Z,1528924697.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:18.438Z,1528924698.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:18.771Z,1528924698.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:19.143Z,1528924699.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:20.310Z,1528924700.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:20.492Z,1528924700.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:20.889Z,1528924700.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:21.293Z,1528924701.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:21.697Z,1528924701.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:22.088Z,1528924702.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:22.505Z,1528924702.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:22.876Z,1528924702.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:23.304Z,1528924703.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:24.490Z,1528924704.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:24.647Z,1528924704.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:25.045Z,1528924705.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:25.450Z,1528924705.450 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:25.450Z,1528924705.450 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 356
2018-06-13T21:18:25.450Z,1528924705.450 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:18:25.451Z,1528924705.451 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:25.452Z,1528924705.452 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 356
2018-06-13T21:18:25.452Z,1528924705.452 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:18:25.454Z,1528924705.454 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:25.454Z,1528924705.454 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 356
2018-06-13T21:18:25.454Z,1528924705.454 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:18:25.529Z,1528924705.529 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:18:25.529Z,1528924705.529 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:18:25.530Z,1528924705.530 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:18:25.934Z,1528924705.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:18:25.934Z,1528924705.934 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 356
2018-06-13T21:18:25.935Z,1528924705.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:18:25.935Z,1528924705.935 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 356
2018-06-13T21:18:25.935Z,1528924705.935 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:18:25.935Z,1528924705.935 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 356
2018-06-13T21:18:26.228Z,1528924706.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:18:26.228Z,1528924706.228 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:18:26.245Z,1528924706.245 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:18:26.245Z,1528924706.245 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:18:26.246Z,1528924706.246 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:18:26.246Z,1528924706.246 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:18:26.246Z,1528924706.246 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:18:26.247Z,1528924706.247 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:18:26.247Z,1528924706.247 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:18:26.628Z,1528924706.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:18:26.629Z,1528924706.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:27.027Z,1528924707.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:18:27.028Z,1528924707.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:27.428Z,1528924707.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:18:27.429Z,1528924707.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:27.859Z,1528924707.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T21:18:27.860Z,1528924707.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:28.239Z,1528924708.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T21:18:28.240Z,1528924708.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:29.428Z,1528924709.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T21:18:29.429Z,1528924709.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:29.566Z,1528924709.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T21:18:29.567Z,1528924709.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:29.974Z,1528924709.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T21:18:29.975Z,1528924709.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:30.373Z,1528924710.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T21:18:30.374Z,1528924710.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:30.775Z,1528924710.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T21:18:30.776Z,1528924710.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:31.162Z,1528924711.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T21:18:31.163Z,1528924711.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:31.572Z,1528924711.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T21:18:31.577Z,1528924711.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:31.952Z,1528924711.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T21:18:31.953Z,1528924711.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:32.356Z,1528924712.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T21:18:32.373Z,1528924712.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:32.796Z,1528924712.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T21:18:32.797Z,1528924712.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:33.180Z,1528924713.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T21:18:33.181Z,1528924713.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:34.380Z,1528924714.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T21:18:34.381Z,1528924714.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:34.535Z,1528924714.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T21:18:34.536Z,1528924714.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:34.933Z,1528924714.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T21:18:34.934Z,1528924714.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:35.337Z,1528924715.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T21:18:35.338Z,1528924715.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:35.734Z,1528924715.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T21:18:35.735Z,1528924715.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:36.124Z,1528924716.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T21:18:36.129Z,1528924716.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:36.534Z,1528924716.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T21:18:36.535Z,1528924716.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:36.908Z,1528924716.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T21:18:36.909Z,1528924716.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:37.314Z,1528924717.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T21:18:37.315Z,1528924717.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:37.743Z,1528924717.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T21:18:37.744Z,1528924717.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:38.122Z,1528924718.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.7 s old, using for 20.0 s.
2018-06-13T21:18:38.123Z,1528924718.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:39.354Z,1528924719.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T21:18:39.355Z,1528924719.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:39.501Z,1528924719.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T21:18:39.502Z,1528924719.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:39.911Z,1528924719.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T21:18:39.912Z,1528924719.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:40.311Z,1528924720.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T21:18:40.311Z,1528924720.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:40.706Z,1528924720.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T21:18:40.706Z,1528924720.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:41.105Z,1528924721.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T21:18:41.110Z,1528924721.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:41.519Z,1528924721.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T21:18:41.519Z,1528924721.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:41.911Z,1528924721.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T21:18:41.912Z,1528924721.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:42.307Z,1528924722.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T21:18:42.308Z,1528924722.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:43.475Z,1528924723.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T21:18:43.476Z,1528924723.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:43.598Z,1528924723.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T21:18:43.599Z,1528924723.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:44.016Z,1528924724.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T21:18:44.018Z,1528924724.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:44.417Z,1528924724.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T21:18:44.418Z,1528924724.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:44.814Z,1528924724.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2018-06-13T21:18:44.815Z,1528924724.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:45.212Z,1528924725.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T21:18:45.213Z,1528924725.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:45.619Z,1528924725.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:46.013Z,1528924726.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:46.417Z,1528924726.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:46.830Z,1528924726.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:47.219Z,1528924727.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:48.430Z,1528924728.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:48.580Z,1528924728.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:48.981Z,1528924728.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:49.381Z,1528924729.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:49.780Z,1528924729.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:50.179Z,1528924730.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:50.573Z,1528924730.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:50.960Z,1528924730.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:51.363Z,1528924731.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:51.801Z,1528924731.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:52.188Z,1528924732.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:53.387Z,1528924733.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:53.544Z,1528924733.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:53.944Z,1528924733.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:54.346Z,1528924734.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:54.752Z,1528924734.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:55.141Z,1528924735.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:55.547Z,1528924735.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:55.915Z,1528924735.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:56.347Z,1528924736.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:57.563Z,1528924737.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:57.738Z,1528924737.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:58.124Z,1528924738.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:58.520Z,1528924738.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:58.919Z,1528924738.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:59.310Z,1528924739.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:18:59.710Z,1528924739.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:00.111Z,1528924740.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:00.543Z,1528924740.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:00.919Z,1528924740.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:02.119Z,1528924742.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:02.293Z,1528924742.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:02.675Z,1528924742.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:03.075Z,1528924743.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:03.471Z,1528924743.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:03.872Z,1528924743.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:04.267Z,1528924744.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:04.691Z,1528924744.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:05.076Z,1528924745.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:06.251Z,1528924746.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:06.404Z,1528924746.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:06.812Z,1528924746.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:07.213Z,1528924747.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:07.612Z,1528924747.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:08.004Z,1528924748.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:08.388Z,1528924748.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:08.821Z,1528924748.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:09.220Z,1528924749.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:10.380Z,1528924750.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:10.536Z,1528924750.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:10.926Z,1528924750.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:11.329Z,1528924751.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:11.726Z,1528924751.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:12.120Z,1528924752.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:12.532Z,1528924752.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:12.869Z,1528924752.869 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:19:12.925Z,1528924752.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:13.336Z,1528924753.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:14.559Z,1528924754.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:14.716Z,1528924754.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:15.124Z,1528924755.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:15.515Z,1528924755.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:15.920Z,1528924755.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:16.312Z,1528924756.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:16.713Z,1528924756.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:17.120Z,1528924757.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:17.502Z,1528924757.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:17.927Z,1528924757.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:18.324Z,1528924758.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:19.548Z,1528924759.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:19.699Z,1528924759.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:20.099Z,1528924760.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:20.502Z,1528924760.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:20.904Z,1528924760.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:21.296Z,1528924761.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:21.697Z,1528924761.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:22.092Z,1528924762.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:22.496Z,1528924762.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:22.927Z,1528924762.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:23.299Z,1528924763.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:24.540Z,1528924764.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:24.687Z,1528924764.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:25.086Z,1528924765.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:25.484Z,1528924765.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:25.883Z,1528924765.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:26.283Z,1528924766.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:26.684Z,1528924766.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:27.081Z,1528924767.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:27.480Z,1528924767.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:27.889Z,1528924767.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:28.284Z,1528924768.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:29.535Z,1528924769.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:29.662Z,1528924769.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:30.091Z,1528924770.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:30.496Z,1528924770.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:30.891Z,1528924770.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:31.268Z,1528924771.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:31.691Z,1528924771.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:32.160Z,1528924772.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:32.511Z,1528924772.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:32.897Z,1528924772.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:33.287Z,1528924773.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:34.689Z,1528924774.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:34.850Z,1528924774.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:35.259Z,1528924775.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:35.658Z,1528924775.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:36.058Z,1528924776.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:36.447Z,1528924776.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:36.867Z,1528924776.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:37.247Z,1528924777.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:37.668Z,1528924777.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:38.059Z,1528924778.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:39.292Z,1528924779.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:39.444Z,1528924779.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:39.846Z,1528924779.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:40.246Z,1528924780.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:40.646Z,1528924780.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:41.042Z,1528924781.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:41.443Z,1528924781.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:41.857Z,1528924781.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:42.252Z,1528924782.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:43.410Z,1528924783.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:43.564Z,1528924783.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:43.957Z,1528924783.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:44.357Z,1528924784.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:44.756Z,1528924784.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:45.147Z,1528924785.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:45.545Z,1528924785.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:45.968Z,1528924785.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:46.357Z,1528924786.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:47.542Z,1528924787.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:47.698Z,1528924787.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:48.098Z,1528924788.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:48.505Z,1528924788.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:48.897Z,1528924788.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:49.296Z,1528924789.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:49.676Z,1528924789.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:50.100Z,1528924790.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:50.482Z,1528924790.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:50.910Z,1528924790.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:51.309Z,1528924791.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:52.472Z,1528924792.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:52.620Z,1528924792.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:53.024Z,1528924793.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:53.424Z,1528924793.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:53.820Z,1528924793.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:54.217Z,1528924794.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:54.626Z,1528924794.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:55.017Z,1528924795.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:55.424Z,1528924795.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:56.633Z,1528924796.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:56.812Z,1528924796.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:57.219Z,1528924797.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:57.614Z,1528924797.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:58.014Z,1528924798.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:58.388Z,1528924798.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:58.818Z,1528924798.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:59.189Z,1528924799.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:19:59.624Z,1528924799.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:00.011Z,1528924800.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:01.228Z,1528924801.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:01.374Z,1528924801.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:01.772Z,1528924801.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:02.177Z,1528924802.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:02.578Z,1528924802.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:02.972Z,1528924802.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:03.369Z,1528924803.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:03.788Z,1528924803.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:04.184Z,1528924804.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:05.364Z,1528924805.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:05.513Z,1528924805.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:05.921Z,1528924805.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:06.321Z,1528924806.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:06.718Z,1528924806.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:07.117Z,1528924807.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:07.514Z,1528924807.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:07.932Z,1528924807.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:08.330Z,1528924808.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:09.483Z,1528924809.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:09.627Z,1528924809.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:10.028Z,1528924810.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:10.431Z,1528924810.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:10.829Z,1528924810.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:11.224Z,1528924811.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:11.664Z,1528924811.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:12.016Z,1528924812.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:12.420Z,1528924812.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:12.831Z,1528924812.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:14.019Z,1528924814.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:14.110Z,1528924814.110 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:20:14.167Z,1528924814.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:14.576Z,1528924814.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:14.976Z,1528924814.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:15.374Z,1528924815.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:15.756Z,1528924815.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:16.148Z,1528924816.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:16.553Z,1528924816.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:16.980Z,1528924816.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:17.375Z,1528924817.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:18.578Z,1528924818.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:18.737Z,1528924818.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:19.136Z,1528924819.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:19.539Z,1528924819.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:19.935Z,1528924819.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:20.312Z,1528924820.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:20.713Z,1528924820.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:21.128Z,1528924821.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:21.517Z,1528924821.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:21.942Z,1528924821.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:22.344Z,1528924822.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:23.542Z,1528924823.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:23.709Z,1528924823.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:24.104Z,1528924824.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:24.505Z,1528924824.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:24.923Z,1528924824.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:25.308Z,1528924825.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:25.701Z,1528924825.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:26.097Z,1528924826.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:26.512Z,1528924826.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:26.913Z,1528924826.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:27.311Z,1528924827.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:28.526Z,1528924828.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:28.667Z,1528924828.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:29.067Z,1528924829.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:29.464Z,1528924829.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:29.872Z,1528924829.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:30.264Z,1528924830.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:30.673Z,1528924830.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:31.065Z,1528924831.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:31.469Z,1528924831.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:32.657Z,1528924832.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:32.816Z,1528924832.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:33.211Z,1528924833.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:33.615Z,1528924833.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:34.013Z,1528924834.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:34.413Z,1528924834.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:34.792Z,1528924834.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:35.188Z,1528924835.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:35.593Z,1528924835.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:36.018Z,1528924836.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:36.419Z,1528924836.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:37.591Z,1528924837.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:37.743Z,1528924837.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:38.176Z,1528924838.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:38.568Z,1528924838.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:38.971Z,1528924838.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:39.368Z,1528924839.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:39.746Z,1528924839.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:40.143Z,1528924840.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:40.548Z,1528924840.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:40.980Z,1528924840.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:41.373Z,1528924841.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:42.573Z,1528924842.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:42.732Z,1528924842.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:43.128Z,1528924843.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:43.531Z,1528924843.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:43.931Z,1528924843.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:44.327Z,1528924844.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:44.729Z,1528924844.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:45.128Z,1528924845.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:45.529Z,1528924845.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:45.939Z,1528924845.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:46.334Z,1528924846.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:48.692Z,1528924848.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:48.831Z,1528924848.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:49.240Z,1528924849.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:49.641Z,1528924849.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:50.042Z,1528924850.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:50.436Z,1528924850.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:50.835Z,1528924850.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:51.271Z,1528924851.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:51.638Z,1528924851.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:52.054Z,1528924852.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:52.444Z,1528924852.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:53.638Z,1528924853.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:53.764Z,1528924853.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:54.191Z,1528924854.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:54.601Z,1528924854.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:54.996Z,1528924854.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:55.380Z,1528924855.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:55.772Z,1528924855.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:56.172Z,1528924856.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:56.593Z,1528924856.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:57.004Z,1528924857.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:57.391Z,1528924857.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:58.624Z,1528924858.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:58.798Z,1528924858.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:59.200Z,1528924859.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:59.602Z,1528924859.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:20:59.999Z,1528924859.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:00.376Z,1528924860.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:00.776Z,1528924860.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:01.176Z,1528924861.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:01.580Z,1528924861.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:02.007Z,1528924862.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:02.399Z,1528924862.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:03.613Z,1528924863.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:03.772Z,1528924863.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:04.166Z,1528924864.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:04.564Z,1528924864.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:04.984Z,1528924864.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:05.367Z,1528924865.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:05.762Z,1528924865.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:06.158Z,1528924866.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:06.565Z,1528924866.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:06.983Z,1528924866.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:07.381Z,1528924867.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:08.588Z,1528924868.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:08.763Z,1528924868.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:09.143Z,1528924869.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:09.543Z,1528924869.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:09.944Z,1528924869.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:10.334Z,1528924870.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:10.760Z,1528924870.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:11.142Z,1528924871.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:11.543Z,1528924871.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:12.729Z,1528924872.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:12.866Z,1528924872.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:13.275Z,1528924873.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:13.674Z,1528924873.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:14.012Z,1528924874.012 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:21:14.078Z,1528924874.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:14.473Z,1528924874.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:14.865Z,1528924874.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:15.250Z,1528924875.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:15.676Z,1528924875.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:16.089Z,1528924876.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:16.480Z,1528924876.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:17.659Z,1528924877.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:17.824Z,1528924877.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:18.240Z,1528924878.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:18.648Z,1528924878.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:19.032Z,1528924879.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:19.437Z,1528924879.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:19.838Z,1528924879.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:20.214Z,1528924880.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:20.617Z,1528924880.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:21.057Z,1528924881.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:21.451Z,1528924881.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:24.019Z,1528924884.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:24.163Z,1528924884.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:24.562Z,1528924884.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:24.964Z,1528924884.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:25.367Z,1528924885.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:25.758Z,1528924885.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:26.164Z,1528924886.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:26.554Z,1528924886.554 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:26.554Z,1528924886.554 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 357
2018-06-13T21:21:26.555Z,1528924886.555 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:21:26.556Z,1528924886.556 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:26.556Z,1528924886.556 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 357
2018-06-13T21:21:26.556Z,1528924886.556 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:21:26.558Z,1528924886.558 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:26.558Z,1528924886.558 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 357
2018-06-13T21:21:26.558Z,1528924886.558 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:21:26.637Z,1528924886.637 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:21:26.637Z,1528924886.637 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:21:26.638Z,1528924886.638 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:21:27.049Z,1528924887.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:21:27.050Z,1528924887.050 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 357
2018-06-13T21:21:27.050Z,1528924887.050 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:21:27.050Z,1528924887.050 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 357
2018-06-13T21:21:27.051Z,1528924887.051 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:21:27.051Z,1528924887.051 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 357
2018-06-13T21:21:27.362Z,1528924887.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:21:27.362Z,1528924887.362 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:21:27.362Z,1528924887.362 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:21:27.363Z,1528924887.363 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:21:27.363Z,1528924887.363 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:21:27.363Z,1528924887.363 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:21:27.364Z,1528924887.364 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:21:27.364Z,1528924887.364 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:21:27.364Z,1528924887.364 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:21:28.540Z,1528924888.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:21:28.541Z,1528924888.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:28.688Z,1528924888.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T21:21:28.689Z,1528924888.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:29.088Z,1528924889.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T21:21:29.089Z,1528924889.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:29.488Z,1528924889.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T21:21:29.489Z,1528924889.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:29.888Z,1528924889.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T21:21:29.890Z,1528924889.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:30.283Z,1528924890.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T21:21:30.284Z,1528924890.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:30.681Z,1528924890.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T21:21:30.682Z,1528924890.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:31.094Z,1528924891.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T21:21:31.095Z,1528924891.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:31.495Z,1528924891.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T21:21:31.496Z,1528924891.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:32.651Z,1528924892.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T21:21:32.652Z,1528924892.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:32.831Z,1528924892.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T21:21:32.832Z,1528924892.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:33.226Z,1528924893.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T21:21:33.227Z,1528924893.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:33.620Z,1528924893.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T21:21:33.625Z,1528924893.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:34.028Z,1528924894.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T21:21:34.029Z,1528924894.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:34.399Z,1528924894.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T21:21:34.400Z,1528924894.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:34.798Z,1528924894.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T21:21:34.799Z,1528924894.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:35.200Z,1528924895.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T21:21:35.201Z,1528924895.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:35.600Z,1528924895.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T21:21:35.601Z,1528924895.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:36.031Z,1528924896.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T21:21:36.032Z,1528924896.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:36.410Z,1528924896.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T21:21:36.411Z,1528924896.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:37.589Z,1528924897.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T21:21:37.590Z,1528924897.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:37.746Z,1528924897.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T21:21:37.747Z,1528924897.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:38.148Z,1528924898.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T21:21:38.149Z,1528924898.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:38.542Z,1528924898.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T21:21:38.543Z,1528924898.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:38.948Z,1528924898.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T21:21:38.948Z,1528924898.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:39.320Z,1528924899.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T21:21:39.337Z,1528924899.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:39.722Z,1528924899.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T21:21:39.723Z,1528924899.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:40.157Z,1528924900.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T21:21:40.158Z,1528924900.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:40.550Z,1528924900.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T21:21:40.551Z,1528924900.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:41.769Z,1528924901.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T21:21:41.770Z,1528924901.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:41.896Z,1528924901.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T21:21:41.897Z,1528924901.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:42.313Z,1528924902.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T21:21:42.314Z,1528924902.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:42.713Z,1528924902.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T21:21:42.714Z,1528924902.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:43.112Z,1528924903.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T21:21:43.113Z,1528924903.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:43.513Z,1528924903.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T21:21:43.514Z,1528924903.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:43.915Z,1528924903.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T21:21:43.916Z,1528924903.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:44.317Z,1528924904.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T21:21:44.318Z,1528924904.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:44.709Z,1528924904.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T21:21:44.710Z,1528924904.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:45.125Z,1528924905.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T21:21:45.126Z,1528924905.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:45.514Z,1528924905.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T21:21:45.515Z,1528924905.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:46.732Z,1528924906.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:46.870Z,1528924906.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:47.279Z,1528924907.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:47.677Z,1528924907.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:48.079Z,1528924908.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:48.473Z,1528924908.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:48.873Z,1528924908.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:49.257Z,1528924909.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:49.677Z,1528924909.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:50.090Z,1528924910.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:50.479Z,1528924910.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:51.700Z,1528924911.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:51.851Z,1528924911.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:52.250Z,1528924912.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:52.655Z,1528924912.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:53.053Z,1528924913.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:53.440Z,1528924913.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:53.842Z,1528924913.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:54.241Z,1528924914.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:54.647Z,1528924914.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:55.062Z,1528924915.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:55.450Z,1528924915.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:57.135Z,1528924917.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:57.339Z,1528924917.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:57.736Z,1528924917.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:58.138Z,1528924918.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:58.537Z,1528924918.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:58.912Z,1528924918.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:59.311Z,1528924919.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:21:59.713Z,1528924919.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:00.140Z,1528924920.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:00.536Z,1528924920.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:01.886Z,1528924921.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:02.040Z,1528924922.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:02.449Z,1528924922.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:02.840Z,1528924922.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:03.244Z,1528924923.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:03.636Z,1528924923.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:04.020Z,1528924924.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:04.445Z,1528924924.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:04.857Z,1528924924.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:05.249Z,1528924925.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:06.458Z,1528924926.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:06.594Z,1528924926.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:07.002Z,1528924927.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:07.405Z,1528924927.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:07.800Z,1528924927.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:08.196Z,1528924928.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:08.586Z,1528924928.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:09.017Z,1528924929.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:09.414Z,1528924929.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:10.592Z,1528924930.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:10.738Z,1528924930.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:11.167Z,1528924931.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:11.571Z,1528924931.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:11.973Z,1528924931.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:12.348Z,1528924932.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:12.747Z,1528924932.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:13.177Z,1528924933.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:13.574Z,1528924933.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:14.743Z,1528924934.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:14.861Z,1528924934.861 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:22:14.931Z,1528924934.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:15.326Z,1528924935.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:15.724Z,1528924935.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:16.126Z,1528924936.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:16.504Z,1528924936.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:16.901Z,1528924936.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:17.298Z,1528924937.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:17.708Z,1528924937.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:18.140Z,1528924938.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:18.527Z,1528924938.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:19.734Z,1528924939.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:19.878Z,1528924939.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:20.303Z,1528924940.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:20.691Z,1528924940.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:21.089Z,1528924941.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:21.483Z,1528924941.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:21.896Z,1528924941.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:22.286Z,1528924942.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:22.689Z,1528924942.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:23.106Z,1528924943.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:23.500Z,1528924943.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:24.715Z,1528924944.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:24.864Z,1528924944.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:25.263Z,1528924945.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:25.665Z,1528924945.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:26.061Z,1528924946.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:26.453Z,1528924946.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:26.867Z,1528924946.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:27.251Z,1528924947.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:27.665Z,1528924947.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:28.849Z,1528924948.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:29.009Z,1528924949.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:29.409Z,1528924949.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:29.809Z,1528924949.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:30.207Z,1528924950.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:30.605Z,1528924950.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:31.007Z,1528924951.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:31.393Z,1528924951.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:31.867Z,1528924951.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:32.251Z,1528924952.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:32.663Z,1528924952.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:34.283Z,1528924954.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:34.431Z,1528924954.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:34.825Z,1528924954.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:35.227Z,1528924955.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:35.639Z,1528924955.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:36.020Z,1528924956.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:36.411Z,1528924956.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:36.812Z,1528924956.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:37.236Z,1528924957.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:37.624Z,1528924957.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:38.799Z,1528924958.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:38.959Z,1528924958.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:39.348Z,1528924959.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:39.752Z,1528924959.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:40.151Z,1528924960.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:40.553Z,1528924960.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:40.945Z,1528924960.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:41.328Z,1528924961.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:41.729Z,1528924961.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:42.161Z,1528924962.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:42.550Z,1528924962.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:43.720Z,1528924963.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:43.867Z,1528924963.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:44.266Z,1528924964.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:44.670Z,1528924964.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:45.067Z,1528924965.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:45.462Z,1528924965.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:45.876Z,1528924965.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:46.260Z,1528924966.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:46.668Z,1528924966.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:47.873Z,1528924967.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:48.003Z,1528924968.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:48.424Z,1528924968.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:48.820Z,1528924968.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:49.220Z,1528924969.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:49.612Z,1528924969.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:50.025Z,1528924970.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:50.396Z,1528924970.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:50.801Z,1528924970.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:51.236Z,1528924971.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:51.615Z,1528924971.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:52.842Z,1528924972.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:52.987Z,1528924972.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:53.387Z,1528924973.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:53.785Z,1528924973.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:54.186Z,1528924974.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:54.582Z,1528924974.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:54.978Z,1528924974.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:55.379Z,1528924975.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:55.778Z,1528924975.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:56.195Z,1528924976.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:56.587Z,1528924976.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:57.826Z,1528924977.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:57.966Z,1528924977.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:58.383Z,1528924978.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:58.788Z,1528924978.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:59.187Z,1528924979.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:59.585Z,1528924979.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:22:59.988Z,1528924979.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:00.383Z,1528924980.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:00.785Z,1528924980.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:01.197Z,1528924981.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:01.592Z,1528924981.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:02.815Z,1528924982.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:02.995Z,1528924982.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:03.396Z,1528924983.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:03.805Z,1528924983.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:04.202Z,1528924984.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:04.590Z,1528924984.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:04.974Z,1528924984.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:05.374Z,1528924985.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:05.780Z,1528924985.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:06.210Z,1528924986.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:06.663Z,1528924986.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:08.875Z,1528924988.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:09.044Z,1528924989.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:09.445Z,1528924989.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:09.856Z,1528924989.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:10.233Z,1528924990.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:10.623Z,1528924990.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:11.022Z,1528924991.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:11.423Z,1528924991.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:11.823Z,1528924991.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:12.253Z,1528924992.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:12.632Z,1528924992.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:13.864Z,1528924993.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:13.997Z,1528924993.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:14.414Z,1528924994.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:14.755Z,1528924994.755 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:23:14.823Z,1528924994.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:15.215Z,1528924995.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:15.609Z,1528924995.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:16.016Z,1528924996.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:16.400Z,1528924996.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:16.797Z,1528924996.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:17.227Z,1528924997.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:17.623Z,1528924997.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:18.837Z,1528924998.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:18.974Z,1528924998.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:19.384Z,1528924999.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:19.785Z,1528924999.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:20.187Z,1528925000.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:20.582Z,1528925000.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:20.979Z,1528925000.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:21.380Z,1528925001.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:21.782Z,1528925001.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:22.190Z,1528925002.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:22.588Z,1528925002.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:23.789Z,1528925003.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:23.945Z,1528925003.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:24.349Z,1528925004.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:24.750Z,1528925004.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:25.147Z,1528925005.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:25.539Z,1528925005.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:25.952Z,1528925005.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:26.340Z,1528925006.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:26.748Z,1528925006.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:27.936Z,1528925007.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:28.072Z,1528925008.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:28.495Z,1528925008.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:28.896Z,1528925008.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:29.295Z,1528925009.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:29.693Z,1528925009.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:30.077Z,1528925010.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:30.480Z,1528925010.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:30.877Z,1528925010.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:31.316Z,1528925011.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:31.703Z,1528925011.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:32.880Z,1528925012.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:33.051Z,1528925013.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:33.432Z,1528925013.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:33.836Z,1528925013.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:34.267Z,1528925014.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:34.626Z,1528925014.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:35.027Z,1528925015.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:35.424Z,1528925015.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:35.833Z,1528925015.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:36.256Z,1528925016.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:36.635Z,1528925016.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:37.836Z,1528925017.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:37.985Z,1528925017.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:38.408Z,1528925018.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:38.810Z,1528925018.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:39.209Z,1528925019.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:39.587Z,1528925019.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:39.986Z,1528925019.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:40.409Z,1528925020.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:40.812Z,1528925020.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:41.223Z,1528925021.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:41.607Z,1528925021.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:42.786Z,1528925022.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:42.934Z,1528925022.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:43.370Z,1528925023.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:43.765Z,1528925023.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:44.165Z,1528925024.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:44.557Z,1528925024.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:44.970Z,1528925024.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:45.341Z,1528925025.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:45.770Z,1528925025.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:46.972Z,1528925026.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:47.135Z,1528925027.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:47.526Z,1528925027.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:47.929Z,1528925027.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:48.327Z,1528925028.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:48.724Z,1528925028.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:49.108Z,1528925029.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:49.509Z,1528925029.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:49.932Z,1528925029.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:50.339Z,1528925030.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:50.738Z,1528925030.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:51.907Z,1528925031.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:52.059Z,1528925032.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:52.484Z,1528925032.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:52.885Z,1528925032.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:53.282Z,1528925033.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:53.660Z,1528925033.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:54.060Z,1528925034.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:54.460Z,1528925034.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:54.864Z,1528925034.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:55.288Z,1528925035.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:55.667Z,1528925035.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:56.894Z,1528925036.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:57.052Z,1528925037.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:57.449Z,1528925037.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:57.850Z,1528925037.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:58.251Z,1528925038.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:58.641Z,1528925038.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:59.040Z,1528925039.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:59.422Z,1528925039.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:23:59.828Z,1528925039.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:00.256Z,1528925040.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:00.654Z,1528925040.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:01.868Z,1528925041.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:02.023Z,1528925042.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:02.417Z,1528925042.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:02.844Z,1528925042.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:03.215Z,1528925043.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:03.610Z,1528925043.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:04.030Z,1528925044.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:04.406Z,1528925044.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:04.825Z,1528925044.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:06.002Z,1528925046.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:06.131Z,1528925046.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:06.560Z,1528925046.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:06.968Z,1528925046.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:07.359Z,1528925047.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:07.736Z,1528925047.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:08.163Z,1528925048.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:08.536Z,1528925048.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:08.952Z,1528925048.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:09.368Z,1528925049.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:09.766Z,1528925049.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:10.935Z,1528925050.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:11.072Z,1528925051.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:11.426Z,1528925051.426 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T21:24:11.427Z,1528925051.427 [NAL9602] Data Fault, FailCount= 3
2018-06-13T21:24:11.427Z,1528925051.427 [NAL9602](ERROR): Data Fault
2018-06-13T21:24:11.487Z,1528925051.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:11.569Z,1528925051.569 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T21:24:11.827Z,1528925051.827 [NAL9602](INFO): Powering down
2018-06-13T21:24:11.887Z,1528925051.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:12.276Z,1528925052.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:12.674Z,1528925052.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:12.757Z,1528925052.757 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T21:24:12.757Z,1528925052.757 [NAL9602] No Fault, FailCount= 3
2018-06-13T21:24:13.070Z,1528925053.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:13.468Z,1528925053.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:13.880Z,1528925053.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:14.275Z,1528925054.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:14.668Z,1528925054.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:15.020Z,1528925055.020 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:24:15.081Z,1528925055.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:15.476Z,1528925055.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:15.856Z,1528925055.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:16.280Z,1528925056.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:16.662Z,1528925056.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:17.064Z,1528925057.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:17.468Z,1528925057.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:17.864Z,1528925057.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:18.263Z,1528925058.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:18.664Z,1528925058.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:19.064Z,1528925059.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:19.459Z,1528925059.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:19.863Z,1528925059.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:20.264Z,1528925060.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:20.664Z,1528925060.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:21.063Z,1528925061.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:21.463Z,1528925061.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:21.860Z,1528925061.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:22.341Z,1528925062.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:22.664Z,1528925062.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:23.163Z,1528925063.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:23.509Z,1528925063.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:23.867Z,1528925063.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:24.303Z,1528925064.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:24.668Z,1528925064.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:25.066Z,1528925065.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:25.463Z,1528925065.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:25.866Z,1528925065.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:26.268Z,1528925066.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:26.663Z,1528925066.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:27.078Z,1528925067.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:27.468Z,1528925067.468 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:27.468Z,1528925067.468 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 358
2018-06-13T21:24:27.468Z,1528925067.468 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:24:27.470Z,1528925067.470 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:27.470Z,1528925067.470 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 358
2018-06-13T21:24:27.470Z,1528925067.470 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:24:27.472Z,1528925067.472 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:27.472Z,1528925067.472 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 358
2018-06-13T21:24:27.472Z,1528925067.472 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:24:27.545Z,1528925067.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:24:27.545Z,1528925067.545 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:24:27.546Z,1528925067.546 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:24:27.945Z,1528925067.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:24:27.945Z,1528925067.945 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 358
2018-06-13T21:24:27.945Z,1528925067.945 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:24:27.945Z,1528925067.945 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 358
2018-06-13T21:24:27.946Z,1528925067.946 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:24:27.946Z,1528925067.946 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 358
2018-06-13T21:24:28.274Z,1528925068.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:24:28.274Z,1528925068.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:24:28.274Z,1528925068.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:24:28.275Z,1528925068.275 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:24:28.275Z,1528925068.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:24:28.275Z,1528925068.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:24:28.276Z,1528925068.276 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:24:28.276Z,1528925068.276 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:24:28.276Z,1528925068.276 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:24:28.675Z,1528925068.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:24:28.676Z,1528925068.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:29.065Z,1528925069.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:24:29.066Z,1528925069.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:29.474Z,1528925069.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:24:29.475Z,1528925069.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:29.871Z,1528925069.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T21:24:29.872Z,1528925069.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:30.274Z,1528925070.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T21:24:30.274Z,1528925070.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:30.673Z,1528925070.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T21:24:30.674Z,1528925070.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:31.068Z,1528925071.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T21:24:31.073Z,1528925071.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:31.476Z,1528925071.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T21:24:31.477Z,1528925071.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:31.860Z,1528925071.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T21:24:31.885Z,1528925071.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:32.260Z,1528925072.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T21:24:32.281Z,1528925072.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:32.660Z,1528925072.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T21:24:32.661Z,1528925072.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:33.059Z,1528925073.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T21:24:33.060Z,1528925073.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:33.460Z,1528925073.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T21:24:33.461Z,1528925073.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:33.860Z,1528925073.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T21:24:33.861Z,1528925073.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:34.263Z,1528925074.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T21:24:34.264Z,1528925074.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:34.663Z,1528925074.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T21:24:34.664Z,1528925074.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:35.064Z,1528925075.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T21:24:35.065Z,1528925075.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:35.462Z,1528925075.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T21:24:35.463Z,1528925075.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:35.859Z,1528925075.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T21:24:35.860Z,1528925075.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:36.263Z,1528925076.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T21:24:36.264Z,1528925076.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:36.663Z,1528925076.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T21:24:36.663Z,1528925076.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:37.060Z,1528925077.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T21:24:37.061Z,1528925077.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:37.458Z,1528925077.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T21:24:37.459Z,1528925077.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:37.862Z,1528925077.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T21:24:37.863Z,1528925077.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:38.263Z,1528925078.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T21:24:38.264Z,1528925078.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:38.663Z,1528925078.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T21:24:38.664Z,1528925078.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:39.063Z,1528925079.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T21:24:39.064Z,1528925079.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:39.458Z,1528925079.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T21:24:39.459Z,1528925079.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:39.859Z,1528925079.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T21:24:39.860Z,1528925079.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:40.262Z,1528925080.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T21:24:40.263Z,1528925080.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:40.658Z,1528925080.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T21:24:40.659Z,1528925080.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:41.059Z,1528925081.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T21:24:41.060Z,1528925081.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:41.462Z,1528925081.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T21:24:41.463Z,1528925081.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:41.859Z,1528925081.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T21:24:41.860Z,1528925081.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:42.229Z,1528925082.229 [NAL9602](INFO): Powering up NAL9602
2018-06-13T21:24:42.264Z,1528925082.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T21:24:42.264Z,1528925082.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:42.663Z,1528925082.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T21:24:42.664Z,1528925082.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:43.058Z,1528925083.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T21:24:43.059Z,1528925083.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:43.463Z,1528925083.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T21:24:43.464Z,1528925083.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:43.864Z,1528925083.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T21:24:43.865Z,1528925083.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:44.263Z,1528925084.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T21:24:44.264Z,1528925084.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:44.663Z,1528925084.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T21:24:44.664Z,1528925084.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:45.063Z,1528925085.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T21:24:45.064Z,1528925085.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:45.463Z,1528925085.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T21:24:45.464Z,1528925085.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:45.863Z,1528925085.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T21:24:45.864Z,1528925085.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:46.262Z,1528925086.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T21:24:46.263Z,1528925086.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:46.663Z,1528925086.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T21:24:46.664Z,1528925086.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:47.063Z,1528925087.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T21:24:47.064Z,1528925087.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:47.462Z,1528925087.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T21:24:47.463Z,1528925087.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:47.863Z,1528925087.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:48.263Z,1528925088.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:48.664Z,1528925088.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:49.063Z,1528925089.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:49.468Z,1528925089.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:49.862Z,1528925089.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:50.263Z,1528925090.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:50.663Z,1528925090.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:51.068Z,1528925091.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:51.460Z,1528925091.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:51.864Z,1528925091.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:52.268Z,1528925092.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:52.663Z,1528925092.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:53.095Z,1528925093.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:53.430Z,1528925093.430 [NAL9602](INFO): NAL9602 initialized
2018-06-13T21:24:53.464Z,1528925093.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:53.863Z,1528925093.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:54.293Z,1528925094.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:54.695Z,1528925094.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:55.075Z,1528925095.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:55.465Z,1528925095.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:55.864Z,1528925095.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:56.269Z,1528925096.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:56.694Z,1528925096.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:57.075Z,1528925097.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:58.263Z,1528925098.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:58.403Z,1528925098.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:58.813Z,1528925098.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:59.213Z,1528925099.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:24:59.613Z,1528925099.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:00.005Z,1528925100.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:00.404Z,1528925100.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:00.816Z,1528925100.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:01.213Z,1528925101.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:02.444Z,1528925102.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:02.531Z,1528925102.531 [CBIT](IMPORTANT): Beginning ground fault scan
2018-06-13T21:25:02.573Z,1528925102.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:03.007Z,1528925103.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:03.416Z,1528925103.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:03.807Z,1528925103.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:04.203Z,1528925104.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:04.598Z,1528925104.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:04.977Z,1528925104.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:05.407Z,1528925105.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:05.816Z,1528925105.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:06.206Z,1528925106.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:07.418Z,1528925107.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:07.659Z,1528925107.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:08.054Z,1528925108.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:08.458Z,1528925108.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:08.859Z,1528925108.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:09.257Z,1528925109.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:09.653Z,1528925109.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:10.037Z,1528925110.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:10.437Z,1528925110.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:10.862Z,1528925110.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:11.261Z,1528925111.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:12.462Z,1528925112.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:12.680Z,1528925112.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:12.768Z,1528925112.768 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.127894
CHAN A1 (24V): -0.062736
CHAN A2 (12V): -0.001106
CHAN A3 (5V): -0.021521
CHAN B0 (3.3V): -0.000761
CHAN B1 (3.15aV): -0.000799
CHAN B2 (3.15bV): -0.000288
CHAN B3 (GND): -0.000259
OPEN: 0.003375
Full Scale Calc: 4.765 mA, -1.589 mA
2018-06-13T21:25:13.110Z,1528925113.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:13.511Z,1528925113.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:13.912Z,1528925113.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:14.284Z,1528925114.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:14.681Z,1528925114.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:15.036Z,1528925115.036 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:25:15.088Z,1528925115.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:15.482Z,1528925115.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:15.912Z,1528925115.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:16.291Z,1528925116.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:17.530Z,1528925117.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:17.676Z,1528925117.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:18.072Z,1528925118.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:18.473Z,1528925118.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:18.880Z,1528925118.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:19.268Z,1528925119.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:19.652Z,1528925119.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:20.053Z,1528925120.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:20.454Z,1528925120.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:20.880Z,1528925120.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:21.275Z,1528925121.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:22.490Z,1528925122.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:22.632Z,1528925122.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:23.036Z,1528925123.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:23.438Z,1528925123.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:23.839Z,1528925123.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:24.223Z,1528925124.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:24.617Z,1528925124.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:25.017Z,1528925125.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:25.424Z,1528925125.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:25.847Z,1528925125.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:26.227Z,1528925126.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:27.450Z,1528925127.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:27.612Z,1528925127.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:28.007Z,1528925128.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:28.406Z,1528925128.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:28.812Z,1528925128.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:29.200Z,1528925129.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:29.625Z,1528925129.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:29.981Z,1528925129.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:30.407Z,1528925130.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:31.573Z,1528925131.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:31.723Z,1528925131.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:32.122Z,1528925132.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:32.534Z,1528925132.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:32.926Z,1528925132.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:33.321Z,1528925133.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:33.725Z,1528925133.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:34.102Z,1528925134.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:34.502Z,1528925134.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:34.938Z,1528925134.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:35.327Z,1528925135.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:36.507Z,1528925136.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:36.656Z,1528925136.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:37.087Z,1528925137.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:37.467Z,1528925137.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:37.888Z,1528925137.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:38.258Z,1528925138.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:38.659Z,1528925138.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:39.059Z,1528925139.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:39.458Z,1528925139.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:39.888Z,1528925139.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:40.288Z,1528925140.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:41.457Z,1528925141.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:41.620Z,1528925141.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:42.005Z,1528925142.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:42.408Z,1528925142.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:42.806Z,1528925142.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:43.204Z,1528925143.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:43.611Z,1528925143.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:43.994Z,1528925143.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:44.404Z,1528925144.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:45.601Z,1528925145.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:45.738Z,1528925145.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:46.143Z,1528925146.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:46.549Z,1528925146.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:46.948Z,1528925146.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:47.344Z,1528925147.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:47.749Z,1528925147.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:48.125Z,1528925148.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:48.552Z,1528925148.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:48.964Z,1528925148.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:49.355Z,1528925149.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:50.572Z,1528925150.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:50.719Z,1528925150.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:51.122Z,1528925151.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:51.534Z,1528925151.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:51.924Z,1528925151.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:52.318Z,1528925152.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:52.721Z,1528925152.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:53.120Z,1528925153.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:53.519Z,1528925153.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:53.934Z,1528925153.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:54.326Z,1528925154.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:55.544Z,1528925155.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:55.728Z,1528925155.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:56.123Z,1528925156.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:56.532Z,1528925156.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:56.923Z,1528925156.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:57.324Z,1528925157.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:57.705Z,1528925157.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:58.104Z,1528925158.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:58.508Z,1528925158.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:58.932Z,1528925158.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:25:59.330Z,1528925159.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:00.540Z,1528925160.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:00.658Z,1528925160.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:01.092Z,1528925161.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:01.490Z,1528925161.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:01.888Z,1528925161.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:02.264Z,1528925162.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:02.668Z,1528925162.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:03.068Z,1528925163.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:03.472Z,1528925163.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:03.896Z,1528925163.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:04.293Z,1528925164.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:05.515Z,1528925165.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:05.696Z,1528925165.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:06.098Z,1528925166.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:06.499Z,1528925166.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:06.898Z,1528925166.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:07.301Z,1528925167.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:07.700Z,1528925167.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:08.089Z,1528925168.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:08.502Z,1528925168.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:08.912Z,1528925168.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:09.308Z,1528925169.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:10.503Z,1528925170.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:10.654Z,1528925170.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:11.056Z,1528925171.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:11.460Z,1528925171.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:11.854Z,1528925171.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:12.253Z,1528925172.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:12.672Z,1528925172.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:13.057Z,1528925173.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:13.456Z,1528925173.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:14.626Z,1528925174.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:14.750Z,1528925174.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:15.165Z,1528925175.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:15.568Z,1528925175.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:15.904Z,1528925175.904 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:26:15.975Z,1528925175.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:16.362Z,1528925176.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:16.763Z,1528925176.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:17.163Z,1528925177.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:17.557Z,1528925177.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:17.984Z,1528925177.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:18.371Z,1528925178.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:19.564Z,1528925179.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:19.730Z,1528925179.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:20.122Z,1528925180.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:20.526Z,1528925180.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:20.922Z,1528925180.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:21.318Z,1528925181.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:21.719Z,1528925181.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:22.118Z,1528925182.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:22.517Z,1528925182.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:22.933Z,1528925182.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:23.323Z,1528925183.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:24.543Z,1528925184.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:24.694Z,1528925184.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:25.111Z,1528925185.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:25.525Z,1528925185.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:25.919Z,1528925185.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:26.306Z,1528925186.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:26.693Z,1528925186.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:27.097Z,1528925187.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:27.520Z,1528925187.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:27.932Z,1528925187.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:28.324Z,1528925188.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:29.547Z,1528925189.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:29.722Z,1528925189.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:30.131Z,1528925190.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:30.531Z,1528925190.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:30.907Z,1528925190.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:31.299Z,1528925191.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:31.700Z,1528925191.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:32.100Z,1528925192.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:32.500Z,1528925192.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:32.931Z,1528925192.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:33.307Z,1528925193.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:34.541Z,1528925194.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:34.679Z,1528925194.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:35.091Z,1528925195.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:35.491Z,1528925195.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:35.895Z,1528925195.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:36.286Z,1528925196.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:36.698Z,1528925196.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:37.079Z,1528925197.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:37.504Z,1528925197.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:38.682Z,1528925198.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:38.844Z,1528925198.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:39.257Z,1528925199.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:39.648Z,1528925199.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:40.043Z,1528925200.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:40.438Z,1528925200.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:40.816Z,1528925200.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:41.217Z,1528925201.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:41.621Z,1528925201.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:42.052Z,1528925202.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:42.447Z,1528925202.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:43.616Z,1528925203.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:43.763Z,1528925203.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:44.157Z,1528925204.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:44.558Z,1528925204.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:44.957Z,1528925204.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:45.357Z,1528925205.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:45.759Z,1528925205.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:46.153Z,1528925206.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:46.561Z,1528925206.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:46.976Z,1528925206.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:47.363Z,1528925207.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:48.571Z,1528925208.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:48.695Z,1528925208.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:49.119Z,1528925209.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:49.523Z,1528925209.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:49.921Z,1528925209.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:50.321Z,1528925210.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:50.729Z,1528925210.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:51.118Z,1528925211.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:51.517Z,1528925211.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:52.689Z,1528925212.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:52.844Z,1528925212.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:53.275Z,1528925213.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:53.655Z,1528925213.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:54.051Z,1528925214.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:54.446Z,1528925214.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:54.846Z,1528925214.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:55.246Z,1528925215.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:55.646Z,1528925215.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:56.076Z,1528925216.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:56.455Z,1528925216.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:59.029Z,1528925219.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:59.180Z,1528925219.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:59.582Z,1528925219.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:26:59.984Z,1528925219.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:00.387Z,1528925220.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:00.771Z,1528925220.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:01.177Z,1528925221.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:01.590Z,1528925221.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:01.996Z,1528925221.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:02.389Z,1528925222.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:03.555Z,1528925223.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:03.696Z,1528925223.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:04.094Z,1528925224.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:04.495Z,1528925224.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:04.898Z,1528925224.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:05.289Z,1528925225.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:05.691Z,1528925225.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:06.112Z,1528925226.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:06.495Z,1528925226.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:06.898Z,1528925226.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:08.089Z,1528925228.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:08.251Z,1528925228.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:08.647Z,1528925228.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:09.047Z,1528925229.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:09.447Z,1528925229.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:09.843Z,1528925229.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:10.245Z,1528925230.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:10.642Z,1528925230.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:11.060Z,1528925231.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:11.447Z,1528925231.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:12.650Z,1528925232.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:12.767Z,1528925232.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:13.198Z,1528925233.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:13.599Z,1528925233.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:13.997Z,1528925233.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:14.397Z,1528925234.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:14.769Z,1528925234.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:15.197Z,1528925235.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:15.574Z,1528925235.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:15.934Z,1528925235.934 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:27:16.017Z,1528925236.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:16.404Z,1528925236.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:17.610Z,1528925237.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:17.755Z,1528925237.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:18.153Z,1528925238.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:18.564Z,1528925238.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:18.958Z,1528925238.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:19.352Z,1528925239.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:19.772Z,1528925239.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:20.140Z,1528925240.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:20.558Z,1528925240.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:21.719Z,1528925241.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:21.859Z,1528925241.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:22.270Z,1528925242.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:22.669Z,1528925242.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:23.068Z,1528925243.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:23.464Z,1528925243.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:23.868Z,1528925243.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:24.254Z,1528925244.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:24.693Z,1528925244.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:25.077Z,1528925245.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:25.466Z,1528925245.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:26.653Z,1528925246.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:26.783Z,1528925246.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:27.211Z,1528925247.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:27.617Z,1528925247.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:28.015Z,1528925248.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:28.388Z,1528925248.388 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:28.388Z,1528925248.388 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 359
2018-06-13T21:27:28.388Z,1528925248.388 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:27:28.398Z,1528925248.398 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:28.398Z,1528925248.398 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 359
2018-06-13T21:27:28.398Z,1528925248.398 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:27:28.400Z,1528925248.400 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:28.400Z,1528925248.400 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 359
2018-06-13T21:27:28.400Z,1528925248.400 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:27:28.477Z,1528925248.477 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:27:28.477Z,1528925248.477 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:27:28.478Z,1528925248.478 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:27:28.885Z,1528925248.885 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:27:28.885Z,1528925248.885 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 359
2018-06-13T21:27:28.885Z,1528925248.885 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:27:28.885Z,1528925248.885 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 359
2018-06-13T21:27:28.886Z,1528925248.886 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:27:28.886Z,1528925248.886 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 359
2018-06-13T21:27:29.190Z,1528925249.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:27:29.191Z,1528925249.191 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:27:29.191Z,1528925249.191 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:27:29.191Z,1528925249.191 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:27:29.192Z,1528925249.192 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:27:29.192Z,1528925249.192 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:27:29.192Z,1528925249.192 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:27:29.209Z,1528925249.209 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:27:29.209Z,1528925249.209 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:27:29.617Z,1528925249.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:27:29.618Z,1528925249.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:30.024Z,1528925250.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:27:30.025Z,1528925250.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:30.422Z,1528925250.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:27:30.423Z,1528925250.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:31.624Z,1528925251.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T21:27:31.625Z,1528925251.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:31.783Z,1528925251.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T21:27:31.784Z,1528925251.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:32.182Z,1528925252.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T21:27:32.183Z,1528925252.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:32.583Z,1528925252.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T21:27:32.584Z,1528925252.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:32.980Z,1528925252.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T21:27:32.981Z,1528925252.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:33.380Z,1528925253.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T21:27:33.381Z,1528925253.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:33.791Z,1528925253.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T21:27:33.792Z,1528925253.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:34.180Z,1528925254.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T21:27:34.182Z,1528925254.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:34.581Z,1528925254.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T21:27:34.582Z,1528925254.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:35.850Z,1528925255.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T21:27:35.851Z,1528925255.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:36.015Z,1528925256.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T21:27:36.016Z,1528925256.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:36.423Z,1528925256.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T21:27:36.424Z,1528925256.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:36.824Z,1528925256.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T21:27:36.825Z,1528925256.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:37.225Z,1528925257.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T21:27:37.226Z,1528925257.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:37.600Z,1528925257.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T21:27:37.602Z,1528925257.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:38.000Z,1528925258.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T21:27:38.001Z,1528925258.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:38.399Z,1528925258.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T21:27:38.400Z,1528925258.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:38.832Z,1528925258.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T21:27:38.833Z,1528925258.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:39.230Z,1528925259.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T21:27:39.231Z,1528925259.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:40.392Z,1528925260.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T21:27:40.393Z,1528925260.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:40.548Z,1528925260.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T21:27:40.549Z,1528925260.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:40.937Z,1528925260.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T21:27:40.938Z,1528925260.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:41.341Z,1528925261.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T21:27:41.342Z,1528925261.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:41.743Z,1528925261.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T21:27:41.744Z,1528925261.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:42.128Z,1528925262.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T21:27:42.129Z,1528925262.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:42.530Z,1528925262.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T21:27:42.531Z,1528925262.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:42.952Z,1528925262.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T21:27:42.953Z,1528925262.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:43.329Z,1528925263.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T21:27:43.330Z,1528925263.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:43.742Z,1528925263.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T21:27:43.743Z,1528925263.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:44.928Z,1528925264.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T21:27:44.929Z,1528925264.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:45.074Z,1528925265.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-06-13T21:27:45.075Z,1528925265.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:45.484Z,1528925265.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T21:27:45.485Z,1528925265.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:45.885Z,1528925265.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T21:27:45.886Z,1528925265.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:46.282Z,1528925266.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T21:27:46.283Z,1528925266.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:46.672Z,1528925266.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T21:27:46.677Z,1528925266.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:47.082Z,1528925267.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T21:27:47.083Z,1528925267.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:47.477Z,1528925267.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T21:27:47.478Z,1528925267.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:47.897Z,1528925267.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T21:27:47.898Z,1528925267.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:48.286Z,1528925268.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T21:27:48.287Z,1528925268.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:49.442Z,1528925269.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:49.591Z,1528925269.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:50.008Z,1528925270.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:50.408Z,1528925270.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:50.805Z,1528925270.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:51.195Z,1528925271.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.391347 seconds old.
2018-06-13T21:27:51.196Z,1528925271.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:51.197Z,1528925271.197 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.391643 seconds old.
2018-06-13T21:27:51.199Z,1528925271.199 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.391996 seconds old.
2018-06-13T21:27:51.592Z,1528925271.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.788233 seconds old.
2018-06-13T21:27:51.594Z,1528925271.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:51.594Z,1528925271.594 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.788547 seconds old.
2018-06-13T21:27:51.595Z,1528925271.595 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.788882 seconds old.
2018-06-13T21:27:52.001Z,1528925272.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.196706 seconds old.
2018-06-13T21:27:52.002Z,1528925272.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:52.003Z,1528925272.003 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.196963 seconds old.
2018-06-13T21:27:52.004Z,1528925272.004 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.197294 seconds old.
2018-06-13T21:27:52.399Z,1528925272.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.594462 seconds old.
2018-06-13T21:27:52.400Z,1528925272.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:52.400Z,1528925272.400 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.594525 seconds old.
2018-06-13T21:27:52.402Z,1528925272.402 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.595068 seconds old.
2018-06-13T21:27:53.598Z,1528925273.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.794048 seconds old.
2018-06-13T21:27:53.599Z,1528925273.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:53.600Z,1528925273.600 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.794120 seconds old.
2018-06-13T21:27:53.601Z,1528925273.601 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.794657 seconds old.
2018-06-13T21:27:53.739Z,1528925273.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.934743 seconds old.
2018-06-13T21:27:53.740Z,1528925273.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:53.741Z,1528925273.741 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.934825 seconds old.
2018-06-13T21:27:53.742Z,1528925273.742 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.935398 seconds old.
2018-06-13T21:27:54.144Z,1528925274.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:54.539Z,1528925274.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:54.941Z,1528925274.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:55.333Z,1528925275.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:55.734Z,1528925275.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:56.156Z,1528925276.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:56.545Z,1528925276.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:57.727Z,1528925277.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:57.880Z,1528925277.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:58.289Z,1528925278.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:58.667Z,1528925278.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:59.063Z,1528925279.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:59.472Z,1528925279.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:27:59.859Z,1528925279.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:00.260Z,1528925280.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:00.660Z,1528925280.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:01.084Z,1528925281.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:01.472Z,1528925281.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:02.652Z,1528925282.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:02.795Z,1528925282.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:03.228Z,1528925283.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:03.636Z,1528925283.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:04.019Z,1528925284.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:04.412Z,1528925284.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:04.825Z,1528925284.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:05.223Z,1528925285.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:05.616Z,1528925285.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:06.019Z,1528925286.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:08.159Z,1528925288.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:08.312Z,1528925288.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:08.715Z,1528925288.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:09.111Z,1528925289.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:09.516Z,1528925289.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:09.888Z,1528925289.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:10.288Z,1528925290.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:10.692Z,1528925290.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:11.119Z,1528925291.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:11.517Z,1528925291.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:12.684Z,1528925292.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:12.835Z,1528925292.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:13.224Z,1528925293.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:13.622Z,1528925293.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:14.048Z,1528925294.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:14.428Z,1528925294.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:14.853Z,1528925294.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:15.216Z,1528925295.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:15.616Z,1528925295.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:15.964Z,1528925295.964 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:28:16.055Z,1528925296.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:17.268Z,1528925297.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:17.428Z,1528925297.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:17.816Z,1528925297.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:18.215Z,1528925298.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:18.619Z,1528925298.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:19.006Z,1528925299.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:19.407Z,1528925299.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:19.820Z,1528925299.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:20.217Z,1528925300.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:21.403Z,1528925301.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:21.556Z,1528925301.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:21.955Z,1528925301.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:22.352Z,1528925302.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:22.754Z,1528925302.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:23.128Z,1528925303.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:23.529Z,1528925303.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:23.955Z,1528925303.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:24.358Z,1528925304.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:25.515Z,1528925305.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:25.664Z,1528925305.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:26.070Z,1528925306.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:26.462Z,1528925306.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:26.866Z,1528925306.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:27.270Z,1528925307.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:27.657Z,1528925307.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:28.072Z,1528925308.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:28.462Z,1528925308.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:29.658Z,1528925309.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:29.811Z,1528925309.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:30.201Z,1528925310.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:30.604Z,1528925310.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:31.002Z,1528925311.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:31.383Z,1528925311.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:31.805Z,1528925311.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:32.214Z,1528925312.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:32.618Z,1528925312.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:33.766Z,1528925313.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:33.917Z,1528925313.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:34.308Z,1528925314.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:34.712Z,1528925314.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:35.111Z,1528925315.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:35.512Z,1528925315.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:35.892Z,1528925315.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:36.292Z,1528925316.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:36.716Z,1528925316.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:37.118Z,1528925317.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:37.519Z,1528925317.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:38.680Z,1528925318.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:38.832Z,1528925318.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:39.277Z,1528925319.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:39.646Z,1528925319.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:40.072Z,1528925320.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:40.432Z,1528925320.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:40.834Z,1528925320.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:41.251Z,1528925321.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:41.739Z,1528925321.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:43.885Z,1528925323.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:44.025Z,1528925324.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:44.431Z,1528925324.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:44.831Z,1528925324.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:45.229Z,1528925325.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:45.621Z,1528925325.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:46.038Z,1528925326.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:46.421Z,1528925326.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:46.859Z,1528925326.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:47.236Z,1528925327.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:47.636Z,1528925327.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:48.815Z,1528925328.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:48.964Z,1528925328.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:49.391Z,1528925329.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:49.794Z,1528925329.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:50.201Z,1528925330.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:50.577Z,1528925330.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:50.992Z,1528925330.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:51.374Z,1528925331.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:51.773Z,1528925331.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:52.224Z,1528925332.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:52.600Z,1528925332.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:53.765Z,1528925333.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:53.915Z,1528925333.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:54.312Z,1528925334.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:54.712Z,1528925334.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:55.110Z,1528925335.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:55.510Z,1528925335.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:55.928Z,1528925335.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:56.307Z,1528925336.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:56.704Z,1528925336.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:57.117Z,1528925337.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:58.317Z,1528925338.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:58.479Z,1528925338.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:58.870Z,1528925338.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:59.269Z,1528925339.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:28:59.665Z,1528925339.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:00.052Z,1528925340.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:00.460Z,1528925340.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:00.860Z,1528925340.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:01.273Z,1528925341.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:01.668Z,1528925341.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:02.853Z,1528925342.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:02.984Z,1528925342.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:03.411Z,1528925343.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:03.814Z,1528925343.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:04.212Z,1528925344.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:04.588Z,1528925344.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:05.019Z,1528925345.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:05.389Z,1528925345.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:05.792Z,1528925345.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:06.222Z,1528925346.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:06.607Z,1528925346.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:07.787Z,1528925347.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:07.936Z,1528925347.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:08.331Z,1528925348.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:08.728Z,1528925348.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:09.131Z,1528925349.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:09.525Z,1528925349.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:09.945Z,1528925349.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:10.330Z,1528925350.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:10.731Z,1528925350.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:11.895Z,1528925351.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:12.065Z,1528925352.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:12.451Z,1528925352.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:12.851Z,1528925352.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:13.251Z,1528925353.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:13.644Z,1528925353.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:14.051Z,1528925354.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:14.441Z,1528925354.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:14.850Z,1528925354.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:15.263Z,1528925355.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:15.655Z,1528925355.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:15.996Z,1528925355.996 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:29:16.938Z,1528925356.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:17.066Z,1528925357.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:17.495Z,1528925357.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:17.904Z,1528925357.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:18.291Z,1528925358.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:18.672Z,1528925358.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:19.072Z,1528925359.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:19.469Z,1528925359.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:19.874Z,1528925359.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:20.298Z,1528925360.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:20.698Z,1528925360.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:22.308Z,1528925362.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:22.463Z,1528925362.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:22.856Z,1528925362.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:23.260Z,1528925363.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:23.653Z,1528925363.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:24.035Z,1528925364.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:24.462Z,1528925364.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:24.832Z,1528925364.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:25.264Z,1528925365.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:25.669Z,1528925365.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:26.983Z,1528925366.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:27.163Z,1528925367.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:27.559Z,1528925367.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:27.943Z,1528925367.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:28.339Z,1528925368.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:28.736Z,1528925368.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:29.136Z,1528925369.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:29.534Z,1528925369.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:29.968Z,1528925369.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:30.343Z,1528925370.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:31.585Z,1528925371.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:31.734Z,1528925371.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:32.144Z,1528925372.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:32.534Z,1528925372.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:32.961Z,1528925372.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:33.316Z,1528925373.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:33.722Z,1528925373.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:34.164Z,1528925374.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:34.558Z,1528925374.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:35.718Z,1528925375.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:35.858Z,1528925375.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:36.281Z,1528925376.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:36.675Z,1528925376.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:37.085Z,1528925377.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:37.462Z,1528925377.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:37.862Z,1528925377.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:38.286Z,1528925378.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:38.676Z,1528925378.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:39.847Z,1528925379.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:40.023Z,1528925380.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:40.421Z,1528925380.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:40.824Z,1528925380.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:41.226Z,1528925381.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:41.614Z,1528925381.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:42.018Z,1528925382.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:42.402Z,1528925382.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:42.809Z,1528925382.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:43.235Z,1528925383.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:43.611Z,1528925383.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:44.793Z,1528925384.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:44.951Z,1528925384.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:45.366Z,1528925385.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:45.769Z,1528925385.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:46.159Z,1528925386.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:46.552Z,1528925386.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:46.964Z,1528925386.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:47.348Z,1528925387.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:47.745Z,1528925387.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:48.159Z,1528925388.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:49.366Z,1528925389.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:49.508Z,1528925389.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:49.910Z,1528925389.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:50.314Z,1528925390.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:50.712Z,1528925390.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:51.104Z,1528925391.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:51.509Z,1528925391.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:51.902Z,1528925391.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:52.315Z,1528925392.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:52.714Z,1528925392.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:53.924Z,1528925393.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:54.095Z,1528925394.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:54.504Z,1528925394.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:54.893Z,1528925394.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:55.298Z,1528925395.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:55.684Z,1528925395.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:56.076Z,1528925396.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:56.476Z,1528925396.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:57.008Z,1528925397.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:57.354Z,1528925397.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:57.707Z,1528925397.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:59.161Z,1528925399.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:59.324Z,1528925399.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:29:59.727Z,1528925399.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:00.124Z,1528925400.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:00.526Z,1528925400.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:00.913Z,1528925400.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:01.316Z,1528925401.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:01.715Z,1528925401.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:02.147Z,1528925402.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:02.526Z,1528925402.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:03.757Z,1528925403.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:03.911Z,1528925403.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:04.319Z,1528925404.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:04.714Z,1528925404.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:05.113Z,1528925405.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:05.504Z,1528925405.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:05.910Z,1528925405.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:06.325Z,1528925406.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:06.724Z,1528925406.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:07.880Z,1528925407.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:08.023Z,1528925408.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:08.424Z,1528925408.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:08.823Z,1528925408.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:09.230Z,1528925409.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:09.618Z,1528925409.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:10.034Z,1528925410.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:10.422Z,1528925410.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:11.623Z,1528925411.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:11.775Z,1528925411.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:12.183Z,1528925412.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:12.580Z,1528925412.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:12.982Z,1528925412.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:13.372Z,1528925413.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:13.784Z,1528925413.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:14.190Z,1528925414.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:14.596Z,1528925414.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:15.793Z,1528925415.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:15.932Z,1528925415.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:16.276Z,1528925416.276 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:30:16.342Z,1528925416.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:16.737Z,1528925416.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:17.136Z,1528925417.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:17.528Z,1528925417.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:17.934Z,1528925417.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:18.346Z,1528925418.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:18.744Z,1528925418.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:19.907Z,1528925419.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:20.096Z,1528925420.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:20.492Z,1528925420.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:20.871Z,1528925420.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:21.271Z,1528925421.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:21.662Z,1528925421.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:22.063Z,1528925422.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:22.459Z,1528925422.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:22.873Z,1528925422.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:23.283Z,1528925423.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:23.674Z,1528925423.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:24.872Z,1528925424.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:25.017Z,1528925425.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:25.426Z,1528925425.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:25.854Z,1528925425.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:26.223Z,1528925426.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:26.625Z,1528925426.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:27.028Z,1528925427.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:27.410Z,1528925427.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:27.826Z,1528925427.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:29.010Z,1528925429.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:29.147Z,1528925429.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:29.571Z,1528925429.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:29.571Z,1528925429.571 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 360
2018-06-13T21:30:29.571Z,1528925429.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:30:29.574Z,1528925429.574 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:29.574Z,1528925429.574 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 360
2018-06-13T21:30:29.574Z,1528925429.574 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:30:29.575Z,1528925429.575 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:29.576Z,1528925429.576 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 360
2018-06-13T21:30:29.576Z,1528925429.576 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:30:29.649Z,1528925429.649 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:30:29.649Z,1528925429.649 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:30:29.650Z,1528925429.650 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:30:30.053Z,1528925430.053 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:30:30.053Z,1528925430.053 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 360
2018-06-13T21:30:30.054Z,1528925430.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:30:30.054Z,1528925430.054 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 360
2018-06-13T21:30:30.054Z,1528925430.054 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:30:30.054Z,1528925430.054 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 360
2018-06-13T21:30:30.370Z,1528925430.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:30:30.370Z,1528925430.370 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:30:30.371Z,1528925430.371 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:30:30.371Z,1528925430.371 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:30:30.371Z,1528925430.371 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:30:30.372Z,1528925430.372 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:30:30.372Z,1528925430.372 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:30:30.372Z,1528925430.372 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:30:30.373Z,1528925430.373 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:30:30.749Z,1528925430.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:30:30.750Z,1528925430.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:31.147Z,1528925431.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:30:31.148Z,1528925431.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:31.544Z,1528925431.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:30:31.545Z,1528925431.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:31.948Z,1528925431.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T21:30:31.949Z,1528925431.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:32.383Z,1528925432.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T21:30:32.384Z,1528925432.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:32.760Z,1528925432.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T21:30:32.777Z,1528925432.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:33.932Z,1528925433.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T21:30:33.933Z,1528925433.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:34.095Z,1528925434.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T21:30:34.096Z,1528925434.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:34.490Z,1528925434.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T21:30:34.491Z,1528925434.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:34.893Z,1528925434.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T21:30:34.894Z,1528925434.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:35.290Z,1528925435.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T21:30:35.291Z,1528925435.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:35.676Z,1528925435.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T21:30:35.677Z,1528925435.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:36.089Z,1528925436.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T21:30:36.090Z,1528925436.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:36.469Z,1528925436.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T21:30:36.470Z,1528925436.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:36.869Z,1528925436.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T21:30:36.870Z,1528925436.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:37.307Z,1528925437.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T21:30:37.307Z,1528925437.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:37.695Z,1528925437.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T21:30:37.696Z,1528925437.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:39.066Z,1528925439.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T21:30:39.067Z,1528925439.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:39.211Z,1528925439.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T21:30:39.212Z,1528925439.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:39.609Z,1528925439.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T21:30:39.610Z,1528925439.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:40.008Z,1528925440.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T21:30:40.009Z,1528925440.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:40.406Z,1528925440.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T21:30:40.407Z,1528925440.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:40.801Z,1528925440.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T21:30:40.802Z,1528925440.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:41.207Z,1528925441.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T21:30:41.208Z,1528925441.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:41.609Z,1528925441.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T21:30:41.610Z,1528925441.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:41.988Z,1528925441.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T21:30:42.006Z,1528925442.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:42.417Z,1528925442.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T21:30:42.418Z,1528925442.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:42.806Z,1528925442.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T21:30:42.807Z,1528925442.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:44.114Z,1528925444.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T21:30:44.115Z,1528925444.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:44.256Z,1528925444.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T21:30:44.261Z,1528925444.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:44.676Z,1528925444.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-06-13T21:30:44.677Z,1528925444.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:45.084Z,1528925445.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T21:30:45.090Z,1528925445.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:45.481Z,1528925445.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T21:30:45.482Z,1528925445.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:45.854Z,1528925445.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-06-13T21:30:45.855Z,1528925445.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:46.256Z,1528925446.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-06-13T21:30:46.257Z,1528925446.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:46.683Z,1528925446.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T21:30:46.684Z,1528925446.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:47.083Z,1528925447.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T21:30:47.083Z,1528925447.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:47.485Z,1528925447.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T21:30:47.486Z,1528925447.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:48.681Z,1528925448.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T21:30:48.682Z,1528925448.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:48.839Z,1528925448.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T21:30:48.840Z,1528925448.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:49.236Z,1528925449.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T21:30:49.237Z,1528925449.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:49.640Z,1528925449.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:50.037Z,1528925450.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:50.435Z,1528925450.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:50.837Z,1528925450.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:51.249Z,1528925451.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:51.642Z,1528925451.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:52.797Z,1528925452.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:52.947Z,1528925452.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:53.344Z,1528925453.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:53.743Z,1528925453.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:54.144Z,1528925454.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:54.516Z,1528925454.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:54.918Z,1528925454.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:55.352Z,1528925455.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:55.744Z,1528925455.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:56.897Z,1528925456.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:57.046Z,1528925457.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:57.460Z,1528925457.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:57.845Z,1528925457.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:58.252Z,1528925458.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:58.641Z,1528925458.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:59.022Z,1528925459.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:59.461Z,1528925459.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:30:59.845Z,1528925459.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:00.259Z,1528925460.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:01.455Z,1528925461.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:01.608Z,1528925461.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:02.010Z,1528925462.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:02.409Z,1528925462.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:02.810Z,1528925462.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:03.205Z,1528925463.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:03.608Z,1528925463.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:04.002Z,1528925464.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:04.419Z,1528925464.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:04.811Z,1528925464.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:06.199Z,1528925466.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:06.349Z,1528925466.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:06.756Z,1528925466.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:07.135Z,1528925467.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:07.563Z,1528925467.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:07.932Z,1528925467.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:08.329Z,1528925468.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:08.730Z,1528925468.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:09.157Z,1528925469.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:09.535Z,1528925469.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:10.766Z,1528925470.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:10.923Z,1528925470.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:11.322Z,1528925471.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:11.790Z,1528925471.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:12.190Z,1528925472.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:12.501Z,1528925472.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:13.052Z,1528925473.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:13.394Z,1528925473.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:13.714Z,1528925473.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:14.891Z,1528925474.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:15.040Z,1528925475.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:15.440Z,1528925475.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:15.848Z,1528925475.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:16.246Z,1528925476.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:16.576Z,1528925476.576 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:31:16.645Z,1528925476.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:17.028Z,1528925477.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:17.451Z,1528925477.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:17.856Z,1528925477.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:19.005Z,1528925479.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:19.153Z,1528925479.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:19.565Z,1528925479.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:19.969Z,1528925479.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:20.365Z,1528925480.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:20.762Z,1528925480.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:21.161Z,1528925481.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:21.553Z,1528925481.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:21.963Z,1528925481.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:22.377Z,1528925482.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:22.767Z,1528925482.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:23.962Z,1528925483.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:24.119Z,1528925484.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:24.518Z,1528925484.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:24.921Z,1528925484.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:25.315Z,1528925485.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:25.712Z,1528925485.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:26.126Z,1528925486.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:26.511Z,1528925486.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:26.917Z,1528925486.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:28.076Z,1528925488.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:28.223Z,1528925488.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:28.618Z,1528925488.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:29.024Z,1528925489.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:29.422Z,1528925489.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:29.812Z,1528925489.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:30.212Z,1528925490.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:30.611Z,1528925490.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:31.017Z,1528925491.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:31.436Z,1528925491.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:31.822Z,1528925491.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:33.027Z,1528925493.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:33.171Z,1528925493.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:33.577Z,1528925493.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:33.977Z,1528925493.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:34.384Z,1528925494.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:34.767Z,1528925494.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:35.167Z,1528925495.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:35.572Z,1528925495.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:35.972Z,1528925495.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:36.380Z,1528925496.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:36.780Z,1528925496.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:38.014Z,1528925498.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:38.167Z,1528925498.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:38.563Z,1528925498.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:38.964Z,1528925498.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:39.365Z,1528925499.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:39.760Z,1528925499.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:40.176Z,1528925500.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:40.540Z,1528925500.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:40.960Z,1528925500.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:42.140Z,1528925502.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:42.322Z,1528925502.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:42.700Z,1528925502.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:43.103Z,1528925503.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:43.503Z,1528925503.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:43.898Z,1528925503.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:44.295Z,1528925504.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:44.692Z,1528925504.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:45.095Z,1528925505.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:45.531Z,1528925505.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:45.905Z,1528925505.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:47.792Z,1528925507.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:47.958Z,1528925507.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:48.359Z,1528925508.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:48.754Z,1528925508.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:49.172Z,1528925509.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:49.528Z,1528925509.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:49.956Z,1528925509.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:50.361Z,1528925510.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:50.767Z,1528925510.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:51.931Z,1528925511.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:52.075Z,1528925512.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:52.486Z,1528925512.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:52.885Z,1528925512.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:53.287Z,1528925513.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:53.682Z,1528925513.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:54.078Z,1528925514.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:54.499Z,1528925514.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:54.886Z,1528925514.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:56.152Z,1528925516.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:56.328Z,1528925516.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:56.719Z,1528925516.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:57.128Z,1528925517.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:57.526Z,1528925517.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:57.914Z,1528925517.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:58.312Z,1528925518.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:58.712Z,1528925518.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:59.111Z,1528925519.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:59.527Z,1528925519.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:31:59.920Z,1528925519.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:01.174Z,1528925521.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:01.355Z,1528925521.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:01.754Z,1528925521.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:02.153Z,1528925522.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:02.554Z,1528925522.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:02.928Z,1528925522.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:03.329Z,1528925523.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:03.728Z,1528925523.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:04.129Z,1528925524.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:04.558Z,1528925524.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:04.954Z,1528925524.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:06.168Z,1528925526.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:06.316Z,1528925526.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:06.709Z,1528925526.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:07.113Z,1528925527.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:07.509Z,1528925527.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:07.900Z,1528925527.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:08.313Z,1528925528.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:08.709Z,1528925528.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:09.094Z,1528925529.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:09.520Z,1528925529.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:09.914Z,1528925529.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:11.139Z,1528925531.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:11.294Z,1528925531.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:11.723Z,1528925531.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:12.132Z,1528925532.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:12.526Z,1528925532.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:12.921Z,1528925532.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:13.321Z,1528925533.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:13.705Z,1528925533.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:14.105Z,1528925534.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:14.532Z,1528925534.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:14.930Z,1528925534.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:16.124Z,1528925536.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:16.288Z,1528925536.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:16.620Z,1528925536.620 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:32:16.704Z,1528925536.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:17.096Z,1528925537.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:17.480Z,1528925537.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:17.881Z,1528925537.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:18.264Z,1528925538.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:18.665Z,1528925538.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:19.072Z,1528925539.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:19.505Z,1528925539.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:19.891Z,1528925539.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:21.102Z,1528925541.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:21.254Z,1528925541.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:21.695Z,1528925541.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:22.156Z,1528925542.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:22.484Z,1528925542.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:22.902Z,1528925542.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:23.257Z,1528925543.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:23.654Z,1528925543.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:24.056Z,1528925544.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:24.487Z,1528925544.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:24.863Z,1528925544.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:26.193Z,1528925546.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:26.348Z,1528925546.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:26.746Z,1528925546.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:27.150Z,1528925547.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:27.552Z,1528925547.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:27.946Z,1528925547.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:28.345Z,1528925548.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:28.737Z,1528925548.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:29.145Z,1528925549.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:29.559Z,1528925549.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:29.951Z,1528925549.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:31.244Z,1528925551.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:31.396Z,1528925551.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:31.805Z,1528925551.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:32.198Z,1528925552.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:32.599Z,1528925552.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:32.988Z,1528925552.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:33.400Z,1528925553.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:33.789Z,1528925553.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:34.177Z,1528925554.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:34.608Z,1528925554.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:35.008Z,1528925555.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:36.246Z,1528925556.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:36.410Z,1528925556.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:36.809Z,1528925556.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:37.208Z,1528925557.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:37.607Z,1528925557.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:37.996Z,1528925557.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:38.384Z,1528925558.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:38.783Z,1528925558.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:39.188Z,1528925559.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:39.620Z,1528925559.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:40.004Z,1528925560.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:41.235Z,1528925561.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:41.387Z,1528925561.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:41.788Z,1528925561.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:42.192Z,1528925562.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:42.583Z,1528925562.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:42.983Z,1528925562.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:43.386Z,1528925563.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:43.777Z,1528925563.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:44.184Z,1528925564.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:44.598Z,1528925564.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:44.984Z,1528925564.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:46.196Z,1528925566.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:46.373Z,1528925566.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:46.778Z,1528925566.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:47.177Z,1528925567.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:47.575Z,1528925567.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:47.949Z,1528925567.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:48.352Z,1528925568.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:48.752Z,1528925568.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:49.156Z,1528925569.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:49.580Z,1528925569.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:49.979Z,1528925569.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:51.192Z,1528925571.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:51.306Z,1528925571.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:51.736Z,1528925571.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:52.138Z,1528925572.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:52.543Z,1528925572.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:52.933Z,1528925572.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:53.329Z,1528925573.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:53.713Z,1528925573.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:54.125Z,1528925574.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:54.543Z,1528925574.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:54.934Z,1528925574.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:56.152Z,1528925576.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:56.301Z,1528925576.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:56.748Z,1528925576.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:57.139Z,1528925577.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:57.487Z,1528925577.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:57.884Z,1528925577.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:58.394Z,1528925578.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:58.681Z,1528925578.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:32:59.104Z,1528925579.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:00.261Z,1528925580.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:00.407Z,1528925580.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:00.811Z,1528925580.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:01.232Z,1528925581.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:01.615Z,1528925581.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:01.992Z,1528925581.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:02.386Z,1528925582.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:02.788Z,1528925582.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:03.193Z,1528925583.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:03.616Z,1528925583.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:03.996Z,1528925583.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:05.192Z,1528925585.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:05.337Z,1528925585.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:05.743Z,1528925585.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:06.145Z,1528925586.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:06.544Z,1528925586.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:06.931Z,1528925586.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:07.335Z,1528925587.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:07.736Z,1528925587.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:08.134Z,1528925588.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:08.547Z,1528925588.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:08.952Z,1528925588.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:10.135Z,1528925590.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:10.276Z,1528925590.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:10.677Z,1528925590.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:11.084Z,1528925591.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:11.478Z,1528925591.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:11.873Z,1528925591.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:12.288Z,1528925592.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:12.670Z,1528925592.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:13.060Z,1528925593.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:13.484Z,1528925593.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:14.697Z,1528925594.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:14.855Z,1528925594.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:15.242Z,1528925595.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:15.641Z,1528925595.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:16.040Z,1528925596.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:16.384Z,1528925596.384 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:33:16.445Z,1528925596.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:16.833Z,1528925596.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:17.242Z,1528925597.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:17.653Z,1528925597.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:18.051Z,1528925598.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:19.271Z,1528925599.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:19.423Z,1528925599.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:19.852Z,1528925599.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:20.260Z,1528925600.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:20.650Z,1528925600.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:21.056Z,1528925601.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:21.434Z,1528925601.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:21.829Z,1528925601.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:22.234Z,1528925602.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:22.668Z,1528925602.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:23.062Z,1528925603.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:24.275Z,1528925604.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:24.415Z,1528925604.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:24.825Z,1528925604.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:25.225Z,1528925605.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:25.621Z,1528925605.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:26.020Z,1528925606.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:26.417Z,1528925606.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:26.818Z,1528925606.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:27.213Z,1528925607.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:27.631Z,1528925607.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:28.023Z,1528925608.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:29.260Z,1528925609.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:29.387Z,1528925609.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:29.818Z,1528925609.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:30.219Z,1528925610.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:30.617Z,1528925610.617 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:30.617Z,1528925610.617 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 361
2018-06-13T21:33:30.617Z,1528925610.617 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:33:30.619Z,1528925610.619 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:30.619Z,1528925610.619 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 361
2018-06-13T21:33:30.619Z,1528925610.619 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:33:30.621Z,1528925610.621 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:30.621Z,1528925610.621 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 361
2018-06-13T21:33:30.621Z,1528925610.621 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:33:30.693Z,1528925610.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:33:30.693Z,1528925610.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:33:30.694Z,1528925610.694 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:33:31.069Z,1528925611.069 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:33:31.069Z,1528925611.069 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 361
2018-06-13T21:33:31.070Z,1528925611.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:33:31.070Z,1528925611.070 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 361
2018-06-13T21:33:31.070Z,1528925611.070 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:33:31.070Z,1528925611.070 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 361
2018-06-13T21:33:31.395Z,1528925611.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:33:31.396Z,1528925611.396 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:33:31.396Z,1528925611.396 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:33:31.396Z,1528925611.396 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:33:31.397Z,1528925611.397 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:33:31.398Z,1528925611.398 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:33:31.398Z,1528925611.398 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:33:31.399Z,1528925611.399 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:33:31.399Z,1528925611.399 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:33:31.793Z,1528925611.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:33:31.794Z,1528925611.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:32.200Z,1528925612.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:33:32.200Z,1528925612.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:32.632Z,1528925612.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:33:32.637Z,1528925612.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:33.007Z,1528925613.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T21:33:33.008Z,1528925613.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:34.215Z,1528925614.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T21:33:34.216Z,1528925614.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:34.395Z,1528925614.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T21:33:34.396Z,1528925614.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:34.786Z,1528925614.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T21:33:34.787Z,1528925614.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:35.192Z,1528925615.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T21:33:35.193Z,1528925615.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:35.596Z,1528925615.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T21:33:35.597Z,1528925615.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:35.984Z,1528925615.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T21:33:35.984Z,1528925615.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:36.385Z,1528925616.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T21:33:36.386Z,1528925616.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:36.796Z,1528925616.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T21:33:36.834Z,1528925616.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:37.244Z,1528925617.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T21:33:37.245Z,1528925617.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:37.672Z,1528925617.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T21:33:37.673Z,1528925617.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:38.078Z,1528925618.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T21:33:38.079Z,1528925618.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:39.486Z,1528925619.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T21:33:39.487Z,1528925619.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:39.663Z,1528925619.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T21:33:39.664Z,1528925619.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:40.060Z,1528925620.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T21:33:40.061Z,1528925620.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:40.461Z,1528925620.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T21:33:40.462Z,1528925620.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:40.861Z,1528925620.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.2 s old, using for 20.0 s.
2018-06-13T21:33:40.862Z,1528925620.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:41.262Z,1528925621.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T21:33:41.263Z,1528925621.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:41.639Z,1528925621.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T21:33:41.640Z,1528925621.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:42.040Z,1528925622.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T21:33:42.041Z,1528925622.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:42.471Z,1528925622.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T21:33:42.472Z,1528925622.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:42.866Z,1528925622.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T21:33:42.866Z,1528925622.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:44.022Z,1528925624.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T21:33:44.023Z,1528925624.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:44.166Z,1528925624.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-06-13T21:33:44.167Z,1528925624.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:44.575Z,1528925624.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T21:33:44.576Z,1528925624.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:44.977Z,1528925624.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T21:33:44.978Z,1528925624.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:45.377Z,1528925625.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T21:33:45.378Z,1528925625.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:45.751Z,1528925625.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.1 s old, using for 20.0 s.
2018-06-13T21:33:45.752Z,1528925625.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:46.156Z,1528925626.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T21:33:46.156Z,1528925626.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:46.583Z,1528925626.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T21:33:46.584Z,1528925626.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:46.953Z,1528925626.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2018-06-13T21:33:46.954Z,1528925626.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:47.374Z,1528925627.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T21:33:47.375Z,1528925627.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:48.587Z,1528925628.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T21:33:48.588Z,1528925628.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:48.743Z,1528925628.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T21:33:48.744Z,1528925628.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:49.140Z,1528925629.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T21:33:49.141Z,1528925629.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:49.555Z,1528925629.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T21:33:49.556Z,1528925629.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:49.940Z,1528925629.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T21:33:49.941Z,1528925629.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:50.320Z,1528925630.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T21:33:50.337Z,1528925630.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:50.741Z,1528925630.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:51.125Z,1528925631.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:51.551Z,1528925631.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:51.950Z,1528925631.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:53.105Z,1528925633.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:53.256Z,1528925633.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:53.659Z,1528925633.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:54.055Z,1528925634.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:54.447Z,1528925634.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:54.832Z,1528925634.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:55.233Z,1528925635.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:55.666Z,1528925635.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:56.037Z,1528925636.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:56.463Z,1528925636.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:57.643Z,1528925637.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:57.791Z,1528925637.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:58.229Z,1528925638.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:58.628Z,1528925638.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:59.023Z,1528925639.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:59.396Z,1528925639.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:33:59.825Z,1528925639.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:00.198Z,1528925640.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:00.634Z,1528925640.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:01.031Z,1528925641.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:02.221Z,1528925642.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:02.376Z,1528925642.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:02.777Z,1528925642.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:03.177Z,1528925643.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:03.577Z,1528925643.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:03.974Z,1528925643.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:04.389Z,1528925644.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:04.773Z,1528925644.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:05.179Z,1528925645.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:06.340Z,1528925646.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:06.492Z,1528925646.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:06.890Z,1528925646.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:07.290Z,1528925647.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:07.696Z,1528925647.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:08.080Z,1528925648.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:08.477Z,1528925648.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:08.876Z,1528925648.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:09.278Z,1528925649.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:09.695Z,1528925649.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:10.088Z,1528925650.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:11.255Z,1528925651.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:11.402Z,1528925651.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:11.833Z,1528925651.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:12.237Z,1528925652.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:12.641Z,1528925652.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:13.031Z,1528925653.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:13.433Z,1528925653.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:13.833Z,1528925653.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:14.234Z,1528925654.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:14.642Z,1528925654.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:15.040Z,1528925655.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:16.213Z,1528925656.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:16.395Z,1528925656.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:16.728Z,1528925656.728 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:34:16.799Z,1528925656.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:17.197Z,1528925657.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:17.589Z,1528925657.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:17.991Z,1528925657.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:18.402Z,1528925658.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:18.766Z,1528925658.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:19.194Z,1528925659.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:20.395Z,1528925660.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:20.542Z,1528925660.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:20.937Z,1528925660.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:21.345Z,1528925661.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:21.746Z,1528925661.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:22.119Z,1528925662.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:22.521Z,1528925662.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:22.920Z,1528925662.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:23.320Z,1528925663.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:23.751Z,1528925663.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:24.149Z,1528925664.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:25.360Z,1528925665.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:25.502Z,1528925665.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:25.913Z,1528925665.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:26.309Z,1528925666.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:26.719Z,1528925666.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:27.108Z,1528925667.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:27.508Z,1528925667.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:27.901Z,1528925667.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:28.302Z,1528925668.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:28.719Z,1528925668.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:29.114Z,1528925669.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:30.348Z,1528925670.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:30.511Z,1528925670.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:30.906Z,1528925670.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:31.306Z,1528925671.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:31.705Z,1528925671.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:32.109Z,1528925672.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:32.508Z,1528925672.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:32.906Z,1528925672.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:33.299Z,1528925673.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:33.715Z,1528925673.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:34.115Z,1528925674.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:35.322Z,1528925675.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:35.458Z,1528925675.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:35.874Z,1528925675.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:36.278Z,1528925676.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:36.675Z,1528925676.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:37.072Z,1528925677.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:37.470Z,1528925677.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:37.871Z,1528925677.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:38.275Z,1528925678.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:38.692Z,1528925678.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:39.079Z,1528925679.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:40.295Z,1528925680.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:40.444Z,1528925680.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:40.844Z,1528925680.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:41.245Z,1528925681.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:41.643Z,1528925681.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:42.033Z,1528925682.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:42.448Z,1528925682.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:42.829Z,1528925682.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:43.244Z,1528925683.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:44.436Z,1528925684.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:44.583Z,1528925684.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:44.978Z,1528925684.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:45.379Z,1528925685.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:45.783Z,1528925685.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:46.171Z,1528925686.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:46.614Z,1528925686.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:47.002Z,1528925687.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:47.391Z,1528925687.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:47.913Z,1528925687.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:48.318Z,1528925688.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:49.371Z,1528925689.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:49.507Z,1528925689.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:49.921Z,1528925689.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:50.330Z,1528925690.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:50.718Z,1528925690.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:51.109Z,1528925691.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:51.517Z,1528925691.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:51.910Z,1528925691.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:52.312Z,1528925692.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:52.730Z,1528925692.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:53.124Z,1528925693.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:54.315Z,1528925694.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:54.464Z,1528925694.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:54.811Z,1528925694.811 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T21:34:54.811Z,1528925694.811 [NAL9602] Data Fault, FailCount= 4
2018-06-13T21:34:54.811Z,1528925694.811 [NAL9602](ERROR): Data Fault
2018-06-13T21:34:54.871Z,1528925694.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:54.957Z,1528925694.957 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T21:34:55.210Z,1528925695.210 [NAL9602](INFO): Powering down
2018-06-13T21:34:55.272Z,1528925695.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:55.648Z,1528925695.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:56.068Z,1528925696.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:56.157Z,1528925696.157 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T21:34:56.157Z,1528925696.157 [NAL9602] No Fault, FailCount= 4
2018-06-13T21:34:56.443Z,1528925696.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:56.847Z,1528925696.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:57.306Z,1528925697.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:57.647Z,1528925697.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:58.047Z,1528925698.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:58.476Z,1528925698.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:58.847Z,1528925698.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:59.251Z,1528925699.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:34:59.651Z,1528925699.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:00.047Z,1528925700.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:00.448Z,1528925700.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:00.847Z,1528925700.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:01.247Z,1528925701.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:01.652Z,1528925701.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:02.047Z,1528925702.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:02.448Z,1528925702.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:02.848Z,1528925702.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:03.247Z,1528925703.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:03.649Z,1528925703.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:04.046Z,1528925704.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:04.453Z,1528925704.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:04.852Z,1528925704.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:05.250Z,1528925705.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:05.651Z,1528925705.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:06.051Z,1528925706.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:06.452Z,1528925706.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:06.850Z,1528925706.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:07.251Z,1528925707.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:07.647Z,1528925707.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:08.050Z,1528925708.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:08.452Z,1528925708.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:08.846Z,1528925708.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:09.252Z,1528925709.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:09.649Z,1528925709.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:10.046Z,1528925710.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:10.451Z,1528925710.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:10.850Z,1528925710.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:11.251Z,1528925711.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:11.652Z,1528925711.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:12.053Z,1528925712.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:12.450Z,1528925712.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:12.849Z,1528925712.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:13.250Z,1528925713.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:13.646Z,1528925713.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:14.050Z,1528925714.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:14.448Z,1528925714.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:14.846Z,1528925714.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:15.252Z,1528925715.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:15.650Z,1528925715.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:16.046Z,1528925716.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:16.450Z,1528925716.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:16.804Z,1528925716.804 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-06-13T21:35:16.854Z,1528925716.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:17.246Z,1528925717.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:17.651Z,1528925717.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:18.051Z,1528925718.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:18.450Z,1528925718.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:18.849Z,1528925718.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:19.249Z,1528925719.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:19.650Z,1528925719.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:20.051Z,1528925720.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:20.449Z,1528925720.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:20.850Z,1528925720.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:21.252Z,1528925721.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:21.725Z,1528925721.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:22.087Z,1528925722.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:22.517Z,1528925722.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:22.948Z,1528925722.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:23.281Z,1528925723.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:23.702Z,1528925723.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:24.049Z,1528925724.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:24.447Z,1528925724.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:24.851Z,1528925724.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:25.250Z,1528925725.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:25.606Z,1528925725.606 [NAL9602](INFO): Powering up NAL9602
2018-06-13T21:35:25.665Z,1528925725.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:26.051Z,1528925726.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:26.450Z,1528925726.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:26.851Z,1528925726.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:27.252Z,1528925727.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:27.656Z,1528925727.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:28.048Z,1528925728.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:28.450Z,1528925728.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:28.854Z,1528925728.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:29.248Z,1528925729.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:29.651Z,1528925729.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:30.049Z,1528925730.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:30.450Z,1528925730.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:30.852Z,1528925730.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:31.249Z,1528925731.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:31.652Z,1528925731.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:32.060Z,1528925732.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:32.464Z,1528925732.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:32.856Z,1528925732.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:33.251Z,1528925733.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:33.650Z,1528925733.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:34.048Z,1528925734.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:34.453Z,1528925734.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:34.853Z,1528925734.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:35.279Z,1528925735.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:35.652Z,1528925735.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:36.068Z,1528925736.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:36.410Z,1528925736.410 [NAL9602](INFO): NAL9602 initialized
2018-06-13T21:35:36.464Z,1528925736.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:36.852Z,1528925736.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:37.266Z,1528925737.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:37.661Z,1528925737.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:38.061Z,1528925738.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:38.462Z,1528925738.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:38.853Z,1528925738.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:39.276Z,1528925739.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:39.666Z,1528925739.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:40.852Z,1528925740.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:41.004Z,1528925741.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:41.409Z,1528925741.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:41.803Z,1528925741.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:42.211Z,1528925742.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:42.581Z,1528925742.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:42.980Z,1528925742.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:43.384Z,1528925743.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:43.777Z,1528925743.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:44.211Z,1528925744.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:44.607Z,1528925744.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:45.780Z,1528925745.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:45.923Z,1528925745.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:46.340Z,1528925746.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:46.757Z,1528925746.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:47.125Z,1528925747.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:47.516Z,1528925747.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:47.933Z,1528925747.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:48.318Z,1528925748.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:48.717Z,1528925748.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:49.127Z,1528925749.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:50.287Z,1528925750.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:50.439Z,1528925750.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:50.863Z,1528925750.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:51.246Z,1528925751.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:51.651Z,1528925751.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:52.039Z,1528925752.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:52.439Z,1528925752.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:52.839Z,1528925752.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:53.278Z,1528925753.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:53.643Z,1528925753.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:54.839Z,1528925754.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:54.979Z,1528925754.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:55.389Z,1528925755.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:55.790Z,1528925755.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:56.190Z,1528925756.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:56.587Z,1528925756.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:56.982Z,1528925756.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:57.380Z,1528925757.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:57.783Z,1528925757.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:58.196Z,1528925758.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:58.587Z,1528925758.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:59.823Z,1528925759.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:35:59.983Z,1528925759.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:00.378Z,1528925760.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:00.777Z,1528925760.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:01.179Z,1528925761.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:01.679Z,1528925761.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:01.976Z,1528925761.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:02.375Z,1528925762.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:02.772Z,1528925762.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:03.200Z,1528925763.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:03.581Z,1528925763.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:04.969Z,1528925764.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:05.135Z,1528925765.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:05.529Z,1528925765.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:05.930Z,1528925765.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:06.332Z,1528925766.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:06.729Z,1528925766.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:07.125Z,1528925767.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:07.506Z,1528925767.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:07.943Z,1528925767.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:08.344Z,1528925768.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:09.540Z,1528925769.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:09.688Z,1528925769.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:10.088Z,1528925770.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:10.488Z,1528925770.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:10.886Z,1528925770.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:11.291Z,1528925771.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:11.665Z,1528925771.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:12.100Z,1528925772.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:12.485Z,1528925772.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:13.659Z,1528925773.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:13.834Z,1528925773.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:14.235Z,1528925774.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:14.615Z,1528925774.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:15.020Z,1528925775.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:15.406Z,1528925775.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:15.809Z,1528925775.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:16.224Z,1528925776.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:16.615Z,1528925776.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:17.798Z,1528925777.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:17.959Z,1528925777.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:18.345Z,1528925778.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:18.752Z,1528925778.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:19.152Z,1528925779.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:19.546Z,1528925779.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:19.960Z,1528925779.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:20.360Z,1528925780.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:20.758Z,1528925780.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:21.960Z,1528925781.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:22.109Z,1528925782.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:22.509Z,1528925782.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:22.915Z,1528925782.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:23.313Z,1528925783.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:23.711Z,1528925783.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:24.102Z,1528925784.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:24.508Z,1528925784.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:24.911Z,1528925784.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:25.323Z,1528925785.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:25.714Z,1528925785.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:26.953Z,1528925786.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:27.111Z,1528925787.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:27.509Z,1528925787.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:27.910Z,1528925787.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:28.306Z,1528925788.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:28.709Z,1528925788.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:29.109Z,1528925789.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:29.485Z,1528925789.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:29.909Z,1528925789.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:30.317Z,1528925790.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:30.720Z,1528925790.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:31.913Z,1528925791.913 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:31.913Z,1528925791.913 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 362
2018-06-13T21:36:31.913Z,1528925791.913 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:36:31.915Z,1528925791.915 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:31.915Z,1528925791.915 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 362
2018-06-13T21:36:31.915Z,1528925791.915 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:36:31.917Z,1528925791.917 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:31.917Z,1528925791.917 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 362
2018-06-13T21:36:31.917Z,1528925791.917 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:36:32.005Z,1528925792.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:36:32.005Z,1528925792.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:36:32.005Z,1528925792.005 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:36:32.149Z,1528925792.149 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:36:32.149Z,1528925792.149 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 362
2018-06-13T21:36:32.150Z,1528925792.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:36:32.150Z,1528925792.150 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 362
2018-06-13T21:36:32.150Z,1528925792.150 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:36:32.150Z,1528925792.150 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 362
2018-06-13T21:36:32.472Z,1528925792.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:36:32.473Z,1528925792.473 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:36:32.473Z,1528925792.473 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:36:32.474Z,1528925792.474 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:36:32.474Z,1528925792.474 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:36:32.474Z,1528925792.474 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:36:32.475Z,1528925792.475 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:36:32.475Z,1528925792.475 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:36:32.475Z,1528925792.475 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:36:32.876Z,1528925792.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T21:36:32.877Z,1528925792.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:33.279Z,1528925793.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.4 s old, using for 20.0 s.
2018-06-13T21:36:33.280Z,1528925793.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:33.676Z,1528925793.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T21:36:33.681Z,1528925793.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:34.056Z,1528925794.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T21:36:34.057Z,1528925794.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:34.455Z,1528925794.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T21:36:34.456Z,1528925794.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:34.854Z,1528925794.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T21:36:34.855Z,1528925794.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:35.292Z,1528925795.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T21:36:35.293Z,1528925795.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:35.662Z,1528925795.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T21:36:35.663Z,1528925795.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:37.907Z,1528925797.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T21:36:37.907Z,1528925797.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:38.063Z,1528925798.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T21:36:38.063Z,1528925798.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:38.490Z,1528925798.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T21:36:38.491Z,1528925798.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:38.904Z,1528925798.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T21:36:38.905Z,1528925798.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:39.299Z,1528925799.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T21:36:39.300Z,1528925799.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:39.671Z,1528925799.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T21:36:39.672Z,1528925799.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:40.072Z,1528925800.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T21:36:40.073Z,1528925800.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:40.471Z,1528925800.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T21:36:40.472Z,1528925800.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:40.876Z,1528925800.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T21:36:40.877Z,1528925800.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:41.313Z,1528925801.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T21:36:41.314Z,1528925801.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:41.698Z,1528925801.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.8 s old, using for 20.0 s.
2018-06-13T21:36:41.699Z,1528925801.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:42.906Z,1528925802.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.0 s old, using for 20.0 s.
2018-06-13T21:36:42.907Z,1528925802.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:43.066Z,1528925803.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T21:36:43.066Z,1528925803.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:43.465Z,1528925803.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T21:36:43.466Z,1528925803.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:43.870Z,1528925803.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T21:36:43.870Z,1528925803.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:44.263Z,1528925804.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T21:36:44.264Z,1528925804.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:44.677Z,1528925804.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T21:36:44.678Z,1528925804.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:45.056Z,1528925805.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.1 s old, using for 20.0 s.
2018-06-13T21:36:45.057Z,1528925805.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:45.452Z,1528925805.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.5 s old, using for 20.0 s.
2018-06-13T21:36:45.458Z,1528925805.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:45.859Z,1528925805.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T21:36:45.860Z,1528925805.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:46.276Z,1528925806.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T21:36:46.277Z,1528925806.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:46.666Z,1528925806.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T21:36:46.667Z,1528925806.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:47.978Z,1528925807.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T21:36:47.979Z,1528925807.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:48.132Z,1528925808.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T21:36:48.133Z,1528925808.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:48.562Z,1528925808.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T21:36:48.563Z,1528925808.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:48.972Z,1528925808.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T21:36:48.973Z,1528925808.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:49.359Z,1528925809.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T21:36:49.359Z,1528925809.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:49.740Z,1528925809.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T21:36:49.757Z,1528925809.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:50.144Z,1528925810.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T21:36:50.161Z,1528925810.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:50.539Z,1528925810.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2018-06-13T21:36:50.540Z,1528925810.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:50.940Z,1528925810.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T21:36:50.941Z,1528925810.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:51.371Z,1528925811.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T21:36:51.371Z,1528925811.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:51.766Z,1528925811.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T21:36:51.767Z,1528925811.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:52.988Z,1528925812.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:53.131Z,1528925813.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:53.527Z,1528925813.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:53.930Z,1528925813.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:54.326Z,1528925814.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:54.721Z,1528925814.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:55.128Z,1528925815.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:55.523Z,1528925815.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:55.921Z,1528925815.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:56.336Z,1528925816.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:56.730Z,1528925816.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:57.951Z,1528925817.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:58.117Z,1528925818.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:58.526Z,1528925818.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:58.925Z,1528925818.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:59.323Z,1528925819.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:36:59.697Z,1528925819.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:00.124Z,1528925820.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:00.501Z,1528925820.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:00.901Z,1528925820.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:01.332Z,1528925821.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:01.726Z,1528925821.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:02.942Z,1528925822.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:03.084Z,1528925823.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:03.485Z,1528925823.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:03.892Z,1528925823.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:04.287Z,1528925824.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:04.681Z,1528925824.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:05.088Z,1528925825.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:05.483Z,1528925825.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:05.885Z,1528925825.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:06.296Z,1528925826.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:06.695Z,1528925826.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:07.928Z,1528925827.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:08.061Z,1528925828.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:08.491Z,1528925828.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:08.891Z,1528925828.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:09.287Z,1528925829.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:09.687Z,1528925829.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:10.071Z,1528925830.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:10.472Z,1528925830.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:10.869Z,1528925830.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:11.304Z,1528925831.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:11.697Z,1528925831.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:12.912Z,1528925832.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:13.051Z,1528925833.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:13.461Z,1528925833.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:13.862Z,1528925833.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:14.263Z,1528925834.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:14.655Z,1528925834.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:15.067Z,1528925835.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:15.450Z,1528925835.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:15.866Z,1528925835.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:17.043Z,1528925837.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:17.203Z,1528925837.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:17.599Z,1528925837.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:18.008Z,1528925838.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:18.396Z,1528925838.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:18.800Z,1528925838.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:19.201Z,1528925839.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:19.577Z,1528925839.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:19.993Z,1528925839.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:20.420Z,1528925840.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:20.805Z,1528925840.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:22.000Z,1528925842.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:22.131Z,1528925842.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:22.559Z,1528925842.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:22.962Z,1528925842.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:23.360Z,1528925843.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:23.756Z,1528925843.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:24.140Z,1528925844.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:24.540Z,1528925844.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:24.942Z,1528925844.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:25.368Z,1528925845.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:25.763Z,1528925845.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:26.935Z,1528925846.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:27.075Z,1528925847.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:27.477Z,1528925847.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:27.881Z,1528925847.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:28.274Z,1528925848.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:28.673Z,1528925848.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:29.085Z,1528925849.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:29.460Z,1528925849.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:29.884Z,1528925849.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:31.071Z,1528925851.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:31.232Z,1528925851.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:31.627Z,1528925851.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:32.031Z,1528925852.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:32.426Z,1528925852.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:32.824Z,1528925852.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:33.224Z,1528925853.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:33.622Z,1528925853.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:34.026Z,1528925854.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:34.439Z,1528925854.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:34.836Z,1528925854.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:36.081Z,1528925856.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:36.239Z,1528925856.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:36.638Z,1528925856.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:37.050Z,1528925857.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:37.438Z,1528925857.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:37.836Z,1528925857.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:38.236Z,1528925858.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:38.637Z,1528925858.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:39.041Z,1528925859.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:39.449Z,1528925859.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:39.848Z,1528925859.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:41.063Z,1528925861.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:41.203Z,1528925861.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:41.617Z,1528925861.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:42.013Z,1528925862.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:42.414Z,1528925862.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:42.800Z,1528925862.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:43.213Z,1528925863.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:43.608Z,1528925863.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:44.006Z,1528925864.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:44.422Z,1528925864.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:44.814Z,1528925864.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:46.058Z,1528925866.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:46.197Z,1528925866.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:46.615Z,1528925866.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:47.018Z,1528925867.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:47.415Z,1528925867.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:47.811Z,1528925867.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:48.213Z,1528925868.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:48.588Z,1528925868.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:49.013Z,1528925869.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:49.427Z,1528925869.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:49.833Z,1528925869.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:51.031Z,1528925871.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:51.166Z,1528925871.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:51.738Z,1528925871.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:51.988Z,1528925871.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:52.369Z,1528925872.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:52.762Z,1528925872.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:53.162Z,1528925873.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:53.559Z,1528925873.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:53.971Z,1528925873.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:54.406Z,1528925874.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:54.773Z,1528925874.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:56.306Z,1528925876.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:56.457Z,1528925876.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:56.857Z,1528925876.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:57.268Z,1528925877.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:57.661Z,1528925877.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:58.058Z,1528925878.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:58.456Z,1528925878.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:58.860Z,1528925878.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:59.270Z,1528925879.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:37:59.664Z,1528925879.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:00.854Z,1528925880.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:01.012Z,1528925881.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:01.412Z,1528925881.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:01.817Z,1528925881.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:02.208Z,1528925882.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:02.608Z,1528925882.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:03.005Z,1528925883.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:03.428Z,1528925883.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:03.824Z,1528925883.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:04.979Z,1528925884.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:05.136Z,1528925885.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:05.523Z,1528925885.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:05.923Z,1528925885.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:06.323Z,1528925886.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:06.725Z,1528925886.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:07.138Z,1528925887.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:07.529Z,1528925887.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:08.713Z,1528925888.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:08.880Z,1528925888.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:09.272Z,1528925889.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:09.677Z,1528925889.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:10.070Z,1528925890.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:10.464Z,1528925890.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:10.876Z,1528925890.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:11.286Z,1528925891.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:11.673Z,1528925891.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:12.839Z,1528925892.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:12.981Z,1528925892.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:13.392Z,1528925893.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:13.788Z,1528925893.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:14.191Z,1528925894.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:14.578Z,1528925894.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:14.983Z,1528925894.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:15.416Z,1528925895.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:15.796Z,1528925895.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:17.026Z,1528925897.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:17.183Z,1528925897.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:17.581Z,1528925897.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:17.981Z,1528925897.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:18.380Z,1528925898.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:18.772Z,1528925898.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:19.188Z,1528925899.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:19.560Z,1528925899.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:19.988Z,1528925899.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:21.155Z,1528925901.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:21.304Z,1528925901.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:21.705Z,1528925901.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:22.105Z,1528925902.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:22.507Z,1528925902.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:22.900Z,1528925902.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:23.297Z,1528925903.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:23.693Z,1528925903.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:24.094Z,1528925904.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:24.509Z,1528925904.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:24.906Z,1528925904.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:26.089Z,1528925906.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:26.227Z,1528925906.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:26.645Z,1528925906.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:27.051Z,1528925907.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:27.452Z,1528925907.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:27.844Z,1528925907.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:28.249Z,1528925908.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:28.625Z,1528925908.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:29.036Z,1528925909.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:29.463Z,1528925909.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:29.839Z,1528925909.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:31.035Z,1528925911.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:31.179Z,1528925911.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:31.580Z,1528925911.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:31.981Z,1528925911.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:32.378Z,1528925912.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:32.769Z,1528925912.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:33.188Z,1528925913.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:33.577Z,1528925913.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:33.984Z,1528925913.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:35.144Z,1528925915.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:35.316Z,1528925915.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:35.699Z,1528925915.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:36.099Z,1528925916.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:36.499Z,1528925916.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:36.890Z,1528925916.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:37.291Z,1528925917.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:37.690Z,1528925917.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:38.096Z,1528925918.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:38.520Z,1528925918.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:38.899Z,1528925918.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:40.133Z,1528925920.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:40.251Z,1528925920.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:40.688Z,1528925920.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:41.091Z,1528925921.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:41.491Z,1528925921.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:41.860Z,1528925921.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:42.259Z,1528925922.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:42.660Z,1528925922.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:43.064Z,1528925923.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:43.490Z,1528925923.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:43.891Z,1528925923.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:45.097Z,1528925925.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:45.260Z,1528925925.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:45.659Z,1528925925.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:46.059Z,1528925926.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:46.461Z,1528925926.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:46.848Z,1528925926.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:47.251Z,1528925927.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:47.647Z,1528925927.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:48.051Z,1528925928.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:48.464Z,1528925928.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:48.860Z,1528925928.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:50.141Z,1528925930.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:50.270Z,1528925930.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:50.699Z,1528925930.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:51.108Z,1528925931.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:51.500Z,1528925931.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:51.889Z,1528925931.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:52.297Z,1528925932.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:52.681Z,1528925932.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:53.077Z,1528925933.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:53.514Z,1528925933.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:53.904Z,1528925933.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:55.112Z,1528925935.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:55.254Z,1528925935.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:55.658Z,1528925935.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:56.064Z,1528925936.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:56.467Z,1528925936.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:56.855Z,1528925936.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:57.256Z,1528925937.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:57.656Z,1528925937.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:58.060Z,1528925938.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:58.467Z,1528925938.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:38:58.864Z,1528925938.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:00.111Z,1528925940.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:00.258Z,1528925940.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:00.670Z,1528925940.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:01.070Z,1528925941.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:01.467Z,1528925941.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:01.892Z,1528925941.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:02.263Z,1528925942.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:02.665Z,1528925942.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:03.049Z,1528925943.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:03.476Z,1528925943.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:03.875Z,1528925943.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:05.184Z,1528925945.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:05.339Z,1528925945.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:05.734Z,1528925945.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:06.140Z,1528925946.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:06.535Z,1528925946.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:06.924Z,1528925946.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:07.327Z,1528925947.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:07.731Z,1528925947.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:08.128Z,1528925948.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:08.542Z,1528925948.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:08.932Z,1528925948.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:10.196Z,1528925950.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:10.352Z,1528925950.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:10.755Z,1528925950.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:11.179Z,1528925951.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:11.555Z,1528925951.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:11.948Z,1528925951.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:12.348Z,1528925952.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:12.752Z,1528925952.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:13.152Z,1528925953.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:13.578Z,1528925953.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:13.977Z,1528925953.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:15.336Z,1528925955.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:15.474Z,1528925955.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:15.892Z,1528925955.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:16.286Z,1528925956.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:16.691Z,1528925956.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:17.078Z,1528925957.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:17.491Z,1528925957.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:17.884Z,1528925957.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:18.302Z,1528925958.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:18.699Z,1528925958.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:19.867Z,1528925959.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:20.043Z,1528925960.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:20.439Z,1528925960.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:20.819Z,1528925960.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:21.246Z,1528925961.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:21.616Z,1528925961.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:22.016Z,1528925962.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:22.446Z,1528925962.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:22.824Z,1528925962.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:24.004Z,1528925964.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:24.156Z,1528925964.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:24.563Z,1528925964.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:24.954Z,1528925964.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:25.353Z,1528925965.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:25.750Z,1528925965.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:26.154Z,1528925966.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:26.566Z,1528925966.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:26.956Z,1528925966.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:28.113Z,1528925968.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:28.267Z,1528925968.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:28.664Z,1528925968.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:29.072Z,1528925969.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:29.463Z,1528925969.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:29.864Z,1528925969.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:30.272Z,1528925970.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:30.652Z,1528925970.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:31.061Z,1528925971.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:31.464Z,1528925971.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:32.705Z,1528925972.705 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:32.705Z,1528925972.705 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 363
2018-06-13T21:39:32.705Z,1528925972.705 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:39:32.707Z,1528925972.707 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:32.707Z,1528925972.707 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 363
2018-06-13T21:39:32.707Z,1528925972.707 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:39:32.709Z,1528925972.709 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:32.709Z,1528925972.709 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 363
2018-06-13T21:39:32.709Z,1528925972.709 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:39:32.794Z,1528925972.794 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:39:32.794Z,1528925972.794 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:39:32.794Z,1528925972.794 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:39:32.953Z,1528925972.953 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:39:32.953Z,1528925972.953 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 363
2018-06-13T21:39:32.953Z,1528925972.953 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:39:32.953Z,1528925972.953 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 363
2018-06-13T21:39:32.954Z,1528925972.954 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:39:32.954Z,1528925972.954 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 363
2018-06-13T21:39:33.268Z,1528925973.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:39:33.268Z,1528925973.268 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:39:33.268Z,1528925973.268 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:39:33.269Z,1528925973.269 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:39:33.269Z,1528925973.269 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:39:33.270Z,1528925973.270 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:39:33.270Z,1528925973.270 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:39:33.270Z,1528925973.270 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:39:33.271Z,1528925973.271 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:39:33.670Z,1528925973.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T21:39:33.671Z,1528925973.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:34.051Z,1528925974.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-06-13T21:39:34.052Z,1528925974.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:34.446Z,1528925974.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T21:39:34.447Z,1528925974.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:34.850Z,1528925974.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T21:39:34.851Z,1528925974.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:35.277Z,1528925975.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T21:39:35.278Z,1528925975.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:35.683Z,1528925975.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T21:39:35.684Z,1528925975.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:36.832Z,1528925976.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T21:39:36.833Z,1528925976.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:36.996Z,1528925976.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.3 s old, using for 20.0 s.
2018-06-13T21:39:36.998Z,1528925976.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:37.388Z,1528925977.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.7 s old, using for 20.0 s.
2018-06-13T21:39:37.389Z,1528925977.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:37.785Z,1528925977.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-06-13T21:39:37.786Z,1528925977.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:38.186Z,1528925978.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T21:39:38.187Z,1528925978.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:38.580Z,1528925978.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T21:39:38.585Z,1528925978.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:38.961Z,1528925978.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T21:39:38.962Z,1528925978.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:39.398Z,1528925979.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T21:39:39.399Z,1528925979.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:39.787Z,1528925979.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T21:39:39.788Z,1528925979.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:40.954Z,1528925980.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T21:39:40.955Z,1528925980.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:41.086Z,1528925981.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T21:39:41.087Z,1528925981.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:41.501Z,1528925981.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T21:39:41.502Z,1528925981.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:41.917Z,1528925981.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T21:39:41.918Z,1528925981.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:42.306Z,1528925982.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T21:39:42.307Z,1528925982.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:42.683Z,1528925982.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T21:39:42.684Z,1528925982.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:43.088Z,1528925983.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T21:39:43.105Z,1528925983.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:43.512Z,1528925983.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T21:39:43.513Z,1528925983.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:43.912Z,1528925983.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T21:39:43.918Z,1528925983.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:45.087Z,1528925985.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T21:39:45.089Z,1528925985.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:45.240Z,1528925985.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T21:39:45.242Z,1528925985.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:45.659Z,1528925985.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T21:39:45.660Z,1528925985.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:46.067Z,1528925986.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T21:39:46.068Z,1528925986.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:46.469Z,1528925986.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T21:39:46.470Z,1528925986.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:46.867Z,1528925986.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T21:39:46.868Z,1528925986.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:47.274Z,1528925987.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T21:39:47.275Z,1528925987.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:47.643Z,1528925987.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T21:39:47.644Z,1528925987.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:48.070Z,1528925988.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T21:39:48.071Z,1528925988.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:49.233Z,1528925989.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T21:39:49.234Z,1528925989.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:49.395Z,1528925989.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-06-13T21:39:49.396Z,1528925989.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:49.793Z,1528925989.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T21:39:49.794Z,1528925989.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:50.193Z,1528925990.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T21:39:50.194Z,1528925990.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:50.587Z,1528925990.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T21:39:50.588Z,1528925990.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:50.979Z,1528925990.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T21:39:50.980Z,1528925990.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:51.387Z,1528925991.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T21:39:51.388Z,1528925991.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:51.790Z,1528925991.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T21:39:51.791Z,1528925991.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:52.184Z,1528925992.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T21:39:52.186Z,1528925992.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:52.604Z,1528925992.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T21:39:52.606Z,1528925992.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:52.992Z,1528925992.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:54.185Z,1528925994.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:54.326Z,1528925994.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:54.745Z,1528925994.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:55.150Z,1528925995.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:55.547Z,1528925995.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:55.936Z,1528925995.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:56.347Z,1528925996.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:56.743Z,1528925996.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:57.148Z,1528925997.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:57.558Z,1528925997.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:57.955Z,1528925997.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:59.175Z,1528925999.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:59.352Z,1528925999.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:39:59.751Z,1528925999.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:00.157Z,1528926000.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:00.560Z,1528926000.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:00.952Z,1528926000.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:01.353Z,1528926001.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:01.736Z,1528926001.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:02.136Z,1528926002.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:02.564Z,1528926002.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:02.950Z,1528926002.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:04.183Z,1528926004.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:04.337Z,1528926004.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:04.765Z,1528926004.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:05.168Z,1528926005.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:05.548Z,1528926005.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:05.938Z,1528926005.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:06.342Z,1528926006.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:06.739Z,1528926006.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:07.139Z,1528926007.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:07.572Z,1528926007.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:07.950Z,1528926007.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:09.187Z,1528926009.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:09.335Z,1528926009.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:09.729Z,1528926009.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:10.133Z,1528926010.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:10.533Z,1528926010.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:10.926Z,1528926010.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:11.341Z,1528926011.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:11.765Z,1528926011.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:12.137Z,1528926012.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:13.299Z,1528926013.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:13.479Z,1528926013.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:13.879Z,1528926013.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:14.267Z,1528926014.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:14.666Z,1528926014.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:15.052Z,1528926015.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:15.469Z,1528926015.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:15.869Z,1528926015.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:16.265Z,1528926016.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:16.677Z,1528926016.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:17.076Z,1528926017.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:18.274Z,1528926018.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:18.398Z,1528926018.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:18.827Z,1528926018.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:19.324Z,1528926019.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:19.628Z,1528926019.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:20.008Z,1528926020.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:20.434Z,1528926020.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:20.804Z,1528926020.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:21.225Z,1528926021.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:21.636Z,1528926021.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:22.033Z,1528926022.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:23.228Z,1528926023.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:23.395Z,1528926023.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:23.786Z,1528926023.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:24.186Z,1528926024.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:24.587Z,1528926024.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:24.983Z,1528926024.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:25.384Z,1528926025.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:25.782Z,1528926025.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:26.187Z,1528926026.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:26.596Z,1528926026.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:26.989Z,1528926026.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:28.185Z,1528926028.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:28.351Z,1528926028.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:28.747Z,1528926028.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:29.147Z,1528926029.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:29.548Z,1528926029.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:29.947Z,1528926029.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:30.359Z,1528926030.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:30.720Z,1528926030.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:31.157Z,1528926031.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:32.366Z,1528926032.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:32.548Z,1528926032.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:32.952Z,1528926032.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:33.356Z,1528926033.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:33.752Z,1528926033.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:34.149Z,1528926034.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:34.528Z,1528926034.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:34.930Z,1528926034.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:35.356Z,1528926035.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:35.754Z,1528926035.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:36.958Z,1528926036.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:37.112Z,1528926037.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:37.513Z,1528926037.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:37.908Z,1528926037.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:38.310Z,1528926038.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:38.694Z,1528926038.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:39.086Z,1528926039.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:39.518Z,1528926039.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:39.912Z,1528926039.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:41.063Z,1528926041.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:41.223Z,1528926041.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:41.621Z,1528926041.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:42.026Z,1528926042.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:42.422Z,1528926042.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:42.829Z,1528926042.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:43.225Z,1528926043.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:43.632Z,1528926043.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:44.036Z,1528926044.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:45.194Z,1528926045.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:45.348Z,1528926045.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:45.737Z,1528926045.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:46.141Z,1528926046.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:46.539Z,1528926046.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:46.933Z,1528926046.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:47.339Z,1528926047.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:47.748Z,1528926047.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:48.140Z,1528926048.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:48.543Z,1528926048.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:49.737Z,1528926049.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:49.896Z,1528926049.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:50.285Z,1528926050.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:50.683Z,1528926050.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:51.087Z,1528926051.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:51.472Z,1528926051.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:51.874Z,1528926051.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:52.274Z,1528926052.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:52.695Z,1528926052.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:53.086Z,1528926053.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:54.252Z,1528926054.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:54.419Z,1528926054.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:54.840Z,1528926054.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:55.231Z,1528926055.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:55.640Z,1528926055.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:56.011Z,1528926056.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:56.412Z,1528926056.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:56.813Z,1528926056.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:57.236Z,1528926057.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:57.639Z,1528926057.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:58.041Z,1528926058.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:59.237Z,1528926059.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:59.403Z,1528926059.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:40:59.801Z,1528926059.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:00.200Z,1528926060.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:00.604Z,1528926060.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:00.993Z,1528926060.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:01.408Z,1528926061.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:01.773Z,1528926061.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:02.200Z,1528926062.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:03.371Z,1528926063.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:03.511Z,1528926063.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:03.928Z,1528926063.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:04.323Z,1528926064.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:04.724Z,1528926064.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:05.108Z,1528926065.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:05.519Z,1528926065.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:05.909Z,1528926065.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:06.309Z,1528926066.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:06.723Z,1528926066.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:07.121Z,1528926067.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:08.305Z,1528926068.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:08.454Z,1528926068.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:08.865Z,1528926068.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:09.269Z,1528926069.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:09.666Z,1528926069.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:10.063Z,1528926070.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:10.464Z,1528926070.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:10.863Z,1528926070.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:11.262Z,1528926071.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:11.688Z,1528926071.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:12.070Z,1528926072.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:13.232Z,1528926073.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:13.384Z,1528926073.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:13.812Z,1528926073.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:14.206Z,1528926074.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:14.611Z,1528926074.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:14.992Z,1528926074.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:15.425Z,1528926075.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:15.786Z,1528926075.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:16.217Z,1528926076.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:17.384Z,1528926077.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:17.529Z,1528926077.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:17.926Z,1528926077.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:18.329Z,1528926078.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:18.726Z,1528926078.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:19.124Z,1528926079.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:19.518Z,1528926079.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:19.917Z,1528926079.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:20.323Z,1528926080.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:20.734Z,1528926080.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:21.129Z,1528926081.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:22.295Z,1528926082.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:22.460Z,1528926082.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:22.871Z,1528926082.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:23.273Z,1528926083.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:23.672Z,1528926083.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:24.048Z,1528926084.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:24.469Z,1528926084.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:24.852Z,1528926084.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:25.253Z,1528926085.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:25.678Z,1528926085.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:26.078Z,1528926086.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:28.904Z,1528926088.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:29.084Z,1528926089.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:29.479Z,1528926089.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:29.888Z,1528926089.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:30.284Z,1528926090.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:30.681Z,1528926090.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:31.078Z,1528926091.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:31.490Z,1528926091.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:31.883Z,1528926091.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:33.050Z,1528926093.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:33.186Z,1528926093.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:33.597Z,1528926093.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:33.996Z,1528926093.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:34.394Z,1528926094.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:34.789Z,1528926094.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:35.192Z,1528926095.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:35.601Z,1528926095.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:35.983Z,1528926095.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:36.398Z,1528926096.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:37.591Z,1528926097.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:37.745Z,1528926097.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:38.149Z,1528926098.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:38.547Z,1528926098.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:38.945Z,1528926098.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:39.348Z,1528926099.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:39.740Z,1528926099.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:40.141Z,1528926100.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:40.557Z,1528926100.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:40.943Z,1528926100.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:42.152Z,1528926102.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:42.311Z,1528926102.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:42.705Z,1528926102.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:43.108Z,1528926103.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:43.506Z,1528926103.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:43.902Z,1528926103.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:44.310Z,1528926104.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:44.718Z,1528926104.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:45.114Z,1528926105.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:46.263Z,1528926106.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:46.423Z,1528926106.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:46.820Z,1528926106.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:47.227Z,1528926107.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:47.622Z,1528926107.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:48.016Z,1528926108.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:48.418Z,1528926108.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:48.831Z,1528926108.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:49.223Z,1528926109.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:50.378Z,1528926110.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:50.538Z,1528926110.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:50.947Z,1528926110.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:51.344Z,1528926111.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:51.744Z,1528926111.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:52.121Z,1528926112.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:52.520Z,1528926112.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:52.921Z,1528926112.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:53.335Z,1528926113.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:53.754Z,1528926113.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:54.154Z,1528926114.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:55.323Z,1528926115.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:55.507Z,1528926115.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:55.904Z,1528926115.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:56.291Z,1528926116.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:56.693Z,1528926116.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:57.094Z,1528926117.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:57.497Z,1528926117.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:57.884Z,1528926117.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:58.288Z,1528926118.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:58.704Z,1528926118.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:41:59.859Z,1528926119.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:00.028Z,1528926120.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:00.428Z,1528926120.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:00.828Z,1528926120.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:01.238Z,1528926121.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:01.609Z,1528926121.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:02.009Z,1528926122.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:02.409Z,1528926122.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:02.836Z,1528926122.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:03.240Z,1528926123.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:04.403Z,1528926124.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:04.545Z,1528926124.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:04.952Z,1528926124.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:05.355Z,1528926125.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:05.753Z,1528926125.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:06.148Z,1528926126.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:06.552Z,1528926126.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:06.943Z,1528926126.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:07.352Z,1528926127.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:07.768Z,1528926127.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:08.158Z,1528926128.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:09.341Z,1528926129.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:09.515Z,1528926129.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:09.916Z,1528926129.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:10.315Z,1528926130.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:10.714Z,1528926130.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:11.093Z,1528926131.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:11.520Z,1528926131.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:11.888Z,1528926131.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:12.314Z,1528926132.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:13.478Z,1528926133.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:13.614Z,1528926133.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:14.021Z,1528926134.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:14.428Z,1528926134.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:14.823Z,1528926134.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:15.216Z,1528926135.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:15.625Z,1528926135.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:16.000Z,1528926136.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:16.401Z,1528926136.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:16.833Z,1528926136.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:17.224Z,1528926137.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:18.423Z,1528926138.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:18.551Z,1528926138.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:18.982Z,1528926138.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:19.388Z,1528926139.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:19.785Z,1528926139.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:20.178Z,1528926140.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:20.586Z,1528926140.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:20.956Z,1528926140.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:21.376Z,1528926141.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:21.790Z,1528926141.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:22.191Z,1528926142.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:23.375Z,1528926143.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:23.555Z,1528926143.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:23.950Z,1528926143.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:24.350Z,1528926144.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:24.750Z,1528926144.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:25.145Z,1528926145.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:25.557Z,1528926145.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:25.942Z,1528926145.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:26.354Z,1528926146.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:27.557Z,1528926147.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:27.694Z,1528926147.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:28.103Z,1528926148.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:28.505Z,1528926148.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:28.901Z,1528926148.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:29.296Z,1528926149.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:29.689Z,1528926149.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:30.077Z,1528926150.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:30.502Z,1528926150.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:30.913Z,1528926150.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:31.322Z,1528926151.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:32.537Z,1528926152.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:32.689Z,1528926152.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:33.119Z,1528926153.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:33.518Z,1528926153.518 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:33.518Z,1528926153.518 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 364
2018-06-13T21:42:33.518Z,1528926153.518 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:42:33.520Z,1528926153.520 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:33.520Z,1528926153.520 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 364
2018-06-13T21:42:33.520Z,1528926153.520 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:42:33.522Z,1528926153.522 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:33.522Z,1528926153.522 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 364
2018-06-13T21:42:33.522Z,1528926153.522 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:42:33.597Z,1528926153.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:42:33.597Z,1528926153.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:42:33.598Z,1528926153.598 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:42:33.993Z,1528926153.993 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:42:33.993Z,1528926153.993 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 364
2018-06-13T21:42:33.994Z,1528926153.994 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:42:33.994Z,1528926153.994 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 364
2018-06-13T21:42:33.994Z,1528926153.994 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:42:33.994Z,1528926153.994 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 364
2018-06-13T21:42:34.291Z,1528926154.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:42:34.291Z,1528926154.291 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:42:34.292Z,1528926154.292 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:42:34.292Z,1528926154.292 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:42:34.292Z,1528926154.292 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:42:34.293Z,1528926154.293 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:42:34.293Z,1528926154.293 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:42:34.294Z,1528926154.294 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:42:34.294Z,1528926154.294 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:42:34.700Z,1528926154.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:42:34.701Z,1528926154.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:35.091Z,1528926155.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:42:35.092Z,1528926155.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:35.501Z,1528926155.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:42:35.502Z,1528926155.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:35.924Z,1528926155.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T21:42:35.925Z,1528926155.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:36.306Z,1528926156.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T21:42:36.307Z,1528926156.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:37.530Z,1528926157.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T21:42:37.530Z,1528926157.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:37.673Z,1528926157.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T21:42:37.674Z,1528926157.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:38.085Z,1528926158.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T21:42:38.086Z,1528926158.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:38.484Z,1528926158.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T21:42:38.485Z,1528926158.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:38.883Z,1528926158.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T21:42:38.884Z,1528926158.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:39.264Z,1528926159.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T21:42:39.264Z,1528926159.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:39.660Z,1528926159.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T21:42:39.661Z,1528926159.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:40.064Z,1528926160.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T21:42:40.065Z,1528926160.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:40.464Z,1528926160.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T21:42:40.465Z,1528926160.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:40.895Z,1528926160.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T21:42:40.896Z,1528926160.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:41.270Z,1528926161.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T21:42:41.271Z,1528926161.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:42.662Z,1528926162.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T21:42:42.663Z,1528926162.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:42.847Z,1528926162.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T21:42:42.848Z,1528926162.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:43.247Z,1528926163.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T21:42:43.248Z,1528926163.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:43.645Z,1528926163.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T21:42:43.646Z,1528926163.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:44.044Z,1528926164.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T21:42:44.045Z,1528926164.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:44.424Z,1528926164.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T21:42:44.442Z,1528926164.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:44.819Z,1528926164.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T21:42:44.820Z,1528926164.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:45.220Z,1528926165.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T21:42:45.221Z,1528926165.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:45.654Z,1528926165.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T21:42:45.655Z,1528926165.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:46.046Z,1528926166.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T21:42:46.047Z,1528926166.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:47.319Z,1528926167.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T21:42:47.320Z,1528926167.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:47.468Z,1528926167.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T21:42:47.469Z,1528926167.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:47.866Z,1528926167.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.3 s old, using for 20.0 s.
2018-06-13T21:42:47.867Z,1528926167.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:48.269Z,1528926168.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T21:42:48.270Z,1528926168.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:48.669Z,1528926168.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T21:42:48.670Z,1528926168.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:49.064Z,1528926169.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2018-06-13T21:42:49.064Z,1528926169.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:49.458Z,1528926169.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T21:42:49.459Z,1528926169.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:49.876Z,1528926169.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T21:42:49.878Z,1528926169.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:50.269Z,1528926170.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T21:42:50.270Z,1528926170.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:51.431Z,1528926171.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T21:42:51.432Z,1528926171.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:51.608Z,1528926171.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T21:42:51.609Z,1528926171.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:52.005Z,1528926172.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T21:42:52.006Z,1528926172.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:52.415Z,1528926172.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T21:42:52.416Z,1528926172.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:52.806Z,1528926172.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T21:42:52.807Z,1528926172.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:53.213Z,1528926173.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T21:42:53.214Z,1528926173.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:53.585Z,1528926173.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:54.009Z,1528926174.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:54.385Z,1528926174.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:54.818Z,1528926174.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:55.216Z,1528926175.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:56.383Z,1528926176.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:56.567Z,1528926176.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:56.962Z,1528926176.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:57.357Z,1528926177.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:57.760Z,1528926177.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:58.153Z,1528926178.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:58.571Z,1528926178.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:58.957Z,1528926178.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:42:59.362Z,1528926179.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:00.531Z,1528926180.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:00.680Z,1528926180.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:01.084Z,1528926181.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:01.482Z,1528926181.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:01.881Z,1528926181.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:02.274Z,1528926182.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:02.676Z,1528926182.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:03.073Z,1528926183.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:03.474Z,1528926183.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:03.908Z,1528926183.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:04.284Z,1528926184.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:05.472Z,1528926185.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:05.622Z,1528926185.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:06.022Z,1528926186.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:06.421Z,1528926186.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:06.825Z,1528926186.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:07.208Z,1528926187.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:07.610Z,1528926187.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:08.010Z,1528926188.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:08.411Z,1528926188.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:08.828Z,1528926188.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:09.226Z,1528926189.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:10.468Z,1528926190.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:10.623Z,1528926190.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:11.019Z,1528926191.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:11.424Z,1528926191.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:11.828Z,1528926191.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:12.219Z,1528926192.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:12.626Z,1528926192.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:12.996Z,1528926192.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:13.432Z,1528926193.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:14.591Z,1528926194.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:14.742Z,1528926194.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:15.169Z,1528926195.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:15.552Z,1528926195.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:15.956Z,1528926195.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:16.343Z,1528926196.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:16.793Z,1528926196.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:17.181Z,1528926197.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:17.648Z,1528926197.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:18.084Z,1528926198.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:18.368Z,1528926198.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:19.553Z,1528926199.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:19.711Z,1528926199.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:20.111Z,1528926200.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:20.514Z,1528926200.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:20.980Z,1528926200.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:21.292Z,1528926201.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:21.694Z,1528926201.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:22.091Z,1528926202.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:22.493Z,1528926202.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:22.924Z,1528926202.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:23.322Z,1528926203.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:24.487Z,1528926204.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:24.638Z,1528926204.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:25.034Z,1528926205.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:25.438Z,1528926205.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:25.834Z,1528926205.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:26.243Z,1528926206.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:26.669Z,1528926206.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:27.039Z,1528926207.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:27.438Z,1528926207.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:27.860Z,1528926207.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:29.016Z,1528926209.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:29.188Z,1528926209.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:29.592Z,1528926209.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:29.993Z,1528926209.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:30.391Z,1528926210.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:30.792Z,1528926210.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:31.185Z,1528926211.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:31.568Z,1528926211.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:32.005Z,1528926212.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:32.399Z,1528926212.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:33.657Z,1528926213.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:33.814Z,1528926213.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:34.206Z,1528926214.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:34.604Z,1528926214.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:35.003Z,1528926215.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:35.404Z,1528926215.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:35.806Z,1528926215.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:36.205Z,1528926216.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:36.604Z,1528926216.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:37.023Z,1528926217.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:37.408Z,1528926217.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:38.655Z,1528926218.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:38.812Z,1528926218.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:39.206Z,1528926219.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:39.606Z,1528926219.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:40.006Z,1528926220.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:40.401Z,1528926220.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:40.808Z,1528926220.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:41.201Z,1528926221.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:41.606Z,1528926221.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:42.017Z,1528926222.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:42.409Z,1528926222.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:43.628Z,1528926223.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:43.810Z,1528926223.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:44.208Z,1528926224.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:44.617Z,1528926224.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:45.007Z,1528926225.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:45.385Z,1528926225.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:45.784Z,1528926225.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:46.184Z,1528926226.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:46.586Z,1528926226.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:47.024Z,1528926227.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:47.412Z,1528926227.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:48.643Z,1528926228.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:48.791Z,1528926228.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:49.219Z,1528926229.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:49.632Z,1528926229.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:50.019Z,1528926230.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:50.425Z,1528926230.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:50.820Z,1528926230.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:51.198Z,1528926231.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:51.598Z,1528926231.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:52.029Z,1528926232.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:52.424Z,1528926232.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:53.636Z,1528926233.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:53.783Z,1528926233.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:54.180Z,1528926234.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:54.591Z,1528926234.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:54.992Z,1528926234.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:55.356Z,1528926235.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:55.760Z,1528926235.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:56.157Z,1528926236.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:56.575Z,1528926236.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:57.005Z,1528926237.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:57.377Z,1528926237.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:58.835Z,1528926238.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:59.011Z,1528926239.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:59.400Z,1528926239.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:43:59.816Z,1528926239.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:00.210Z,1528926240.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:00.584Z,1528926240.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:00.983Z,1528926240.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:01.388Z,1528926241.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:01.820Z,1528926241.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:02.211Z,1528926242.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:03.428Z,1528926243.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:03.567Z,1528926243.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:03.966Z,1528926243.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:04.370Z,1528926244.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:04.773Z,1528926244.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:05.162Z,1528926245.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:05.563Z,1528926245.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:05.980Z,1528926245.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:06.374Z,1528926246.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:07.559Z,1528926247.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:07.716Z,1528926247.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:08.111Z,1528926248.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:08.514Z,1528926248.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:08.909Z,1528926248.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:08.913Z,1528926248.913 [Default:CheckIn:Read_Iridium](INFO): Timed out from 2018-06-13T19:44:08.9Z
2018-06-13T21:44:08.913Z,1528926248.913 [Default:CheckIn:Read_Iridium:A_Timeout] Running Loop=1
2018-06-13T21:44:08.913Z,1528926248.913 [Default:CheckIn:Read_Iridium:A_Timeout](DEBUG): Aggregate::initialize Default:CheckIn:Read_Iridium:A_Timeout
2018-06-13T21:44:08.913Z,1528926248.913 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute] Running Loop=1
2018-06-13T21:44:08.914Z,1528926248.914 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](INFO): Executing command Burn 300
2018-06-13T21:44:08.920Z,1528926248.920 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute] Stopped
2018-06-13T21:44:08.920Z,1528926248.920 [Default:CheckIn:Read_Iridium:A_Timeout:B] Running Loop=1
2018-06-13T21:44:09.001Z,1528926249.001 [CommandLine](IMPORTANT): got command burn 300.000000
2018-06-13T21:44:09.321Z,1528926249.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:09.324Z,1528926249.324 [Default:CheckIn:Read_Iridium:A_Timeout:B](CRITICAL): Dropped weight due to communications timeout.
2018-06-13T21:44:09.330Z,1528926249.330 [Default:CheckIn:Read_Iridium:A_Timeout:B] Stopped
2018-06-13T21:44:09.330Z,1528926249.330 [Default:CheckIn:Read_Iridium:A_Timeout](INFO): Completed Default:CheckIn:Read_Iridium:A_Timeout
2018-06-13T21:44:09.330Z,1528926249.330 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T21:44:09.330Z,1528926249.330 [Default:CheckIn:C.Wait] Running Loop=1
2018-06-13T21:44:09.330Z,1528926249.330 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-06-13T21:44:09.409Z,1528926249.409 [CBIT](INFO): Critical error at 20180613T214409
2018-06-13T21:44:09.723Z,1528926249.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:10.104Z,1528926250.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:11.286Z,1528926251.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:11.422Z,1528926251.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:11.830Z,1528926251.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:12.235Z,1528926252.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:12.636Z,1528926252.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:13.028Z,1528926253.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:13.425Z,1528926253.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:13.825Z,1528926253.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:14.253Z,1528926254.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:14.634Z,1528926254.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:15.044Z,1528926255.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:15.430Z,1528926255.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:15.832Z,1528926255.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:16.210Z,1528926256.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:16.614Z,1528926256.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:17.012Z,1528926257.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:17.440Z,1528926257.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:17.844Z,1528926257.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:18.244Z,1528926258.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:18.616Z,1528926258.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:19.017Z,1528926259.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:19.422Z,1528926259.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:19.815Z,1528926259.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:20.248Z,1528926260.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:20.628Z,1528926260.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:21.023Z,1528926261.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:21.416Z,1528926261.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:21.816Z,1528926261.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:22.218Z,1528926262.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:22.616Z,1528926262.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:23.020Z,1528926263.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:23.423Z,1528926263.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:23.823Z,1528926263.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:24.220Z,1528926264.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:24.616Z,1528926264.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:25.017Z,1528926265.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:25.419Z,1528926265.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:25.817Z,1528926265.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:26.224Z,1528926266.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:26.622Z,1528926266.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:27.025Z,1528926267.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:27.420Z,1528926267.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:27.816Z,1528926267.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:28.218Z,1528926268.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:28.616Z,1528926268.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:29.016Z,1528926269.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:29.424Z,1528926269.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:29.824Z,1528926269.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:30.224Z,1528926270.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:30.616Z,1528926270.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:31.015Z,1528926271.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:31.415Z,1528926271.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:31.959Z,1528926271.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:32.225Z,1528926272.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:32.696Z,1528926272.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:33.067Z,1528926273.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:33.507Z,1528926273.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:33.816Z,1528926273.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:34.216Z,1528926274.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:34.623Z,1528926274.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:35.028Z,1528926275.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:35.432Z,1528926275.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:35.830Z,1528926275.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:36.226Z,1528926276.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:36.623Z,1528926276.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:37.022Z,1528926277.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:37.428Z,1528926277.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:37.826Z,1528926277.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:38.232Z,1528926278.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:38.630Z,1528926278.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:39.034Z,1528926279.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:39.425Z,1528926279.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:39.831Z,1528926279.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:40.222Z,1528926280.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:40.630Z,1528926280.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:41.016Z,1528926281.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:41.444Z,1528926281.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:41.843Z,1528926281.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:42.220Z,1528926282.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:42.616Z,1528926282.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:43.016Z,1528926283.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:43.424Z,1528926283.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:43.816Z,1528926283.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:44.224Z,1528926284.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:44.627Z,1528926284.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:45.027Z,1528926285.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:45.414Z,1528926285.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:45.816Z,1528926285.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:46.256Z,1528926286.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:46.616Z,1528926286.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:47.014Z,1528926287.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:47.424Z,1528926287.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:47.827Z,1528926287.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:48.245Z,1528926288.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:48.624Z,1528926288.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:49.019Z,1528926289.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:49.419Z,1528926289.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:49.819Z,1528926289.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:50.225Z,1528926290.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:50.624Z,1528926290.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:51.023Z,1528926291.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:51.414Z,1528926291.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:51.819Z,1528926291.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:52.217Z,1528926292.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:52.616Z,1528926292.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:53.017Z,1528926293.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:53.424Z,1528926293.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:53.854Z,1528926293.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:54.222Z,1528926294.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:54.624Z,1528926294.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:55.019Z,1528926295.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:55.418Z,1528926295.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:55.820Z,1528926295.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:56.224Z,1528926296.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:56.632Z,1528926296.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:57.025Z,1528926297.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:57.415Z,1528926297.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:57.824Z,1528926297.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:58.217Z,1528926298.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:58.620Z,1528926298.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:59.036Z,1528926299.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:59.429Z,1528926299.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:44:59.836Z,1528926299.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:00.233Z,1528926300.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:00.615Z,1528926300.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:01.015Z,1528926301.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:01.416Z,1528926301.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:01.825Z,1528926301.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:02.229Z,1528926302.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:02.629Z,1528926302.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:03.026Z,1528926303.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:03.424Z,1528926303.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:03.820Z,1528926303.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:04.237Z,1528926304.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:04.620Z,1528926304.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:05.020Z,1528926305.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:05.432Z,1528926305.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:05.831Z,1528926305.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:06.231Z,1528926306.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:06.676Z,1528926306.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:07.028Z,1528926307.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:07.432Z,1528926307.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:07.813Z,1528926307.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:08.240Z,1528926308.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:08.636Z,1528926308.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:09.036Z,1528926309.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:09.426Z,1528926309.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:09.832Z,1528926309.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:10.206Z,1528926310.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:10.630Z,1528926310.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:11.012Z,1528926311.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:11.439Z,1528926311.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:11.843Z,1528926311.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:12.228Z,1528926312.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:12.615Z,1528926312.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:13.019Z,1528926313.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:13.419Z,1528926313.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:13.812Z,1528926313.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:14.228Z,1528926314.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:14.628Z,1528926314.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:15.023Z,1528926315.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:15.415Z,1528926315.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:15.818Z,1528926315.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:16.213Z,1528926316.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:16.620Z,1528926316.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:17.032Z,1528926317.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:17.424Z,1528926317.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:17.828Z,1528926317.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:18.232Z,1528926318.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:18.616Z,1528926318.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:19.027Z,1528926319.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:19.425Z,1528926319.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:19.816Z,1528926319.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:20.228Z,1528926320.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:20.628Z,1528926320.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:21.026Z,1528926321.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:21.424Z,1528926321.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:21.819Z,1528926321.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:22.229Z,1528926322.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:22.629Z,1528926322.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:23.030Z,1528926323.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:23.416Z,1528926323.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:23.818Z,1528926323.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:24.229Z,1528926324.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:24.628Z,1528926324.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:25.028Z,1528926325.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:25.420Z,1528926325.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:25.817Z,1528926325.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:26.226Z,1528926326.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:26.629Z,1528926326.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:27.028Z,1528926327.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:27.422Z,1528926327.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:27.830Z,1528926327.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:28.236Z,1528926328.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:28.640Z,1528926328.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:29.036Z,1528926329.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:29.419Z,1528926329.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:29.824Z,1528926329.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:30.227Z,1528926330.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:30.633Z,1528926330.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:31.026Z,1528926331.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:31.424Z,1528926331.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:31.825Z,1528926331.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:32.236Z,1528926332.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:32.630Z,1528926332.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:33.032Z,1528926333.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:33.418Z,1528926333.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:33.820Z,1528926333.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:34.234Z,1528926334.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:34.634Z,1528926334.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:34.634Z,1528926334.634 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 365
2018-06-13T21:45:34.634Z,1528926334.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:45:34.636Z,1528926334.636 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:34.636Z,1528926334.636 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 365
2018-06-13T21:45:34.636Z,1528926334.636 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:45:34.638Z,1528926334.638 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:34.638Z,1528926334.638 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 365
2018-06-13T21:45:34.638Z,1528926334.638 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:45:34.729Z,1528926334.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:45:34.730Z,1528926334.730 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:45:34.730Z,1528926334.730 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:45:35.105Z,1528926335.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:45:35.105Z,1528926335.105 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 365
2018-06-13T21:45:35.105Z,1528926335.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:45:35.105Z,1528926335.105 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 365
2018-06-13T21:45:35.106Z,1528926335.106 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:45:35.106Z,1528926335.106 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 365
2018-06-13T21:45:35.422Z,1528926335.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:45:35.422Z,1528926335.422 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:45:35.422Z,1528926335.422 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:45:35.423Z,1528926335.423 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:45:35.423Z,1528926335.423 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:45:35.424Z,1528926335.424 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:45:35.424Z,1528926335.424 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:45:35.424Z,1528926335.424 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:45:35.429Z,1528926335.429 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:45:35.828Z,1528926335.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:45:35.829Z,1528926335.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:36.236Z,1528926336.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:45:36.237Z,1528926336.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:36.631Z,1528926336.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:45:36.632Z,1528926336.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:37.039Z,1528926337.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T21:45:37.040Z,1528926337.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:37.419Z,1528926337.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T21:45:37.420Z,1528926337.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:37.814Z,1528926337.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T21:45:37.815Z,1528926337.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:38.182Z,1528926338.182 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T21:45:38.182Z,1528926338.182 [NAL9602] Data Fault, FailCount= 5
2018-06-13T21:45:38.182Z,1528926338.182 [NAL9602](ERROR): Data Fault
2018-06-13T21:45:38.216Z,1528926338.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T21:45:38.218Z,1528926338.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:38.297Z,1528926338.297 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T21:45:38.297Z,1528926338.297 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-06-13T21:45:38.574Z,1528926338.574 [NAL9602](INFO): Powering down
2018-06-13T21:45:38.631Z,1528926338.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T21:45:38.632Z,1528926338.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:38.715Z,1528926338.715 [CBIT](INFO): Critical error at 20180613T214538
2018-06-13T21:45:39.010Z,1528926339.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T21:45:39.011Z,1528926339.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:39.420Z,1528926339.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T21:45:39.425Z,1528926339.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:39.817Z,1528926339.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T21:45:39.818Z,1528926339.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:40.224Z,1528926340.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T21:45:40.229Z,1528926340.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:40.623Z,1528926340.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T21:45:40.624Z,1528926340.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:41.007Z,1528926341.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T21:45:41.008Z,1528926341.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:41.404Z,1528926341.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T21:45:41.405Z,1528926341.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:41.833Z,1528926341.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T21:45:41.834Z,1528926341.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:42.209Z,1528926342.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T21:45:42.210Z,1528926342.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:42.604Z,1528926342.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T21:45:42.605Z,1528926342.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:43.008Z,1528926343.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T21:45:43.009Z,1528926343.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:43.408Z,1528926343.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T21:45:43.409Z,1528926343.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:43.806Z,1528926343.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T21:45:43.807Z,1528926343.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:44.212Z,1528926344.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T21:45:44.213Z,1528926344.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:44.611Z,1528926344.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T21:45:44.611Z,1528926344.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:45.008Z,1528926345.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T21:45:45.009Z,1528926345.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:45.416Z,1528926345.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T21:45:45.433Z,1528926345.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:45.811Z,1528926345.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T21:45:45.812Z,1528926345.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:46.207Z,1528926346.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T21:45:46.208Z,1528926346.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:46.612Z,1528926346.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T21:45:46.613Z,1528926346.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:47.011Z,1528926347.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T21:45:47.012Z,1528926347.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:47.411Z,1528926347.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T21:45:47.412Z,1528926347.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:47.811Z,1528926347.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T21:45:47.812Z,1528926347.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:48.211Z,1528926348.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T21:45:48.212Z,1528926348.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:48.611Z,1528926348.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T21:45:48.612Z,1528926348.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:49.016Z,1528926349.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T21:45:49.017Z,1528926349.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:49.410Z,1528926349.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T21:45:49.411Z,1528926349.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:49.807Z,1528926349.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T21:45:49.808Z,1528926349.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:50.216Z,1528926350.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T21:45:50.217Z,1528926350.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:50.610Z,1528926350.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T21:45:50.611Z,1528926350.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:51.009Z,1528926351.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T21:45:51.010Z,1528926351.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:51.411Z,1528926351.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T21:45:51.412Z,1528926351.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:51.811Z,1528926351.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T21:45:51.812Z,1528926351.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:52.209Z,1528926352.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T21:45:52.210Z,1528926352.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:52.615Z,1528926352.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T21:45:52.616Z,1528926352.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:53.011Z,1528926353.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T21:45:53.012Z,1528926353.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:53.411Z,1528926353.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T21:45:53.412Z,1528926353.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:53.820Z,1528926353.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T21:45:53.837Z,1528926353.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:54.211Z,1528926354.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T21:45:54.212Z,1528926354.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:54.610Z,1528926354.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T21:45:54.611Z,1528926354.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:55.015Z,1528926355.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:55.415Z,1528926355.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:55.810Z,1528926355.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:56.216Z,1528926356.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:56.616Z,1528926356.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:57.009Z,1528926357.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:57.415Z,1528926357.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:57.812Z,1528926357.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:58.209Z,1528926358.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:58.612Z,1528926358.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:59.016Z,1528926359.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:59.411Z,1528926359.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:45:59.815Z,1528926359.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:00.216Z,1528926360.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:00.610Z,1528926360.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:01.023Z,1528926361.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:01.416Z,1528926361.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:01.809Z,1528926361.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:02.215Z,1528926362.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:02.612Z,1528926362.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:03.011Z,1528926363.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:03.412Z,1528926363.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:03.816Z,1528926363.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:04.212Z,1528926364.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:04.615Z,1528926364.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:05.012Z,1528926365.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:05.412Z,1528926365.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:05.815Z,1528926365.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:06.213Z,1528926366.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:06.611Z,1528926366.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:07.016Z,1528926367.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:07.412Z,1528926367.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:07.811Z,1528926367.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:08.214Z,1528926368.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:08.612Z,1528926368.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:09.012Z,1528926369.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:09.420Z,1528926369.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:09.812Z,1528926369.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:10.212Z,1528926370.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:10.616Z,1528926370.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:11.011Z,1528926371.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:11.412Z,1528926371.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:11.817Z,1528926371.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:12.212Z,1528926372.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:12.614Z,1528926372.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:13.014Z,1528926373.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:13.414Z,1528926373.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:13.814Z,1528926373.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:14.232Z,1528926374.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:14.614Z,1528926374.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:15.014Z,1528926375.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:15.416Z,1528926375.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:15.810Z,1528926375.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:16.213Z,1528926376.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:16.615Z,1528926376.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:17.014Z,1528926377.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:17.414Z,1528926377.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:17.816Z,1528926377.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:18.213Z,1528926378.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:18.614Z,1528926378.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:19.015Z,1528926379.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:19.413Z,1528926379.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:19.814Z,1528926379.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:20.225Z,1528926380.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:20.614Z,1528926380.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:21.060Z,1528926381.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:21.417Z,1528926381.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:21.811Z,1528926381.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:22.215Z,1528926382.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:22.619Z,1528926382.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:23.014Z,1528926383.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:23.415Z,1528926383.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:23.819Z,1528926383.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:24.214Z,1528926384.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:24.616Z,1528926384.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:25.019Z,1528926385.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:25.414Z,1528926385.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:25.814Z,1528926385.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:26.217Z,1528926386.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:26.615Z,1528926386.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:27.014Z,1528926387.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:27.427Z,1528926387.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:27.813Z,1528926387.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:28.214Z,1528926388.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:28.618Z,1528926388.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:29.013Z,1528926389.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:29.418Z,1528926389.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:29.814Z,1528926389.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:30.214Z,1528926390.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:30.614Z,1528926390.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:31.024Z,1528926391.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:31.414Z,1528926391.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:31.818Z,1528926391.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:32.222Z,1528926392.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:32.613Z,1528926392.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:33.014Z,1528926393.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:33.426Z,1528926393.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:33.814Z,1528926393.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:34.218Z,1528926394.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:34.618Z,1528926394.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:35.013Z,1528926395.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:35.419Z,1528926395.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:35.818Z,1528926395.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:36.216Z,1528926396.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:36.617Z,1528926396.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:37.024Z,1528926397.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:37.413Z,1528926397.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:37.819Z,1528926397.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:38.215Z,1528926398.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:38.614Z,1528926398.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:39.014Z,1528926399.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:39.418Z,1528926399.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:39.813Z,1528926399.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:40.218Z,1528926400.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:40.624Z,1528926400.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:41.014Z,1528926401.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:41.418Z,1528926401.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:41.814Z,1528926401.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:42.214Z,1528926402.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:42.618Z,1528926402.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:43.028Z,1528926403.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:43.417Z,1528926403.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:43.816Z,1528926403.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:44.228Z,1528926404.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:44.624Z,1528926404.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:45.028Z,1528926405.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:45.420Z,1528926405.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:45.822Z,1528926405.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:46.220Z,1528926406.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:46.624Z,1528926406.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:47.023Z,1528926407.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:47.422Z,1528926407.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:47.822Z,1528926407.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:48.223Z,1528926408.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:48.628Z,1528926408.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:49.026Z,1528926409.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:49.428Z,1528926409.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:49.828Z,1528926409.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:50.232Z,1528926410.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:50.624Z,1528926410.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:51.017Z,1528926411.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:51.429Z,1528926411.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:51.836Z,1528926411.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:52.206Z,1528926412.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:52.633Z,1528926412.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:53.009Z,1528926413.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:53.413Z,1528926413.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:53.836Z,1528926413.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:54.212Z,1528926414.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:54.608Z,1528926414.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:55.016Z,1528926415.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:55.411Z,1528926415.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:55.807Z,1528926415.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:56.219Z,1528926416.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:56.642Z,1528926416.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:57.010Z,1528926417.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:57.420Z,1528926417.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:57.811Z,1528926417.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:58.210Z,1528926418.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:58.616Z,1528926418.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:59.015Z,1528926419.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:59.412Z,1528926419.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:46:59.816Z,1528926419.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:00.212Z,1528926420.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:00.611Z,1528926420.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:01.016Z,1528926421.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:01.416Z,1528926421.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:01.810Z,1528926421.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:02.216Z,1528926422.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:02.611Z,1528926422.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:03.010Z,1528926423.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:03.420Z,1528926423.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:03.815Z,1528926423.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:04.230Z,1528926424.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:04.621Z,1528926424.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:05.024Z,1528926425.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:05.420Z,1528926425.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:05.828Z,1528926425.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:06.228Z,1528926426.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:06.604Z,1528926426.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:07.025Z,1528926427.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:07.412Z,1528926427.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:07.804Z,1528926427.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:08.235Z,1528926428.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:08.612Z,1528926428.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:09.009Z,1528926429.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:09.436Z,1528926429.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:09.811Z,1528926429.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:10.207Z,1528926430.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:10.620Z,1528926430.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:11.013Z,1528926431.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:11.411Z,1528926431.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:11.812Z,1528926431.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:12.214Z,1528926432.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:12.609Z,1528926432.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:13.011Z,1528926433.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:13.408Z,1528926433.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:13.812Z,1528926433.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:14.250Z,1528926434.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:14.612Z,1528926434.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:15.007Z,1528926435.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:15.415Z,1528926435.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:15.813Z,1528926435.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:16.208Z,1528926436.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:16.616Z,1528926436.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:17.014Z,1528926437.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:17.413Z,1528926437.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:17.837Z,1528926437.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:18.215Z,1528926438.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:18.614Z,1528926438.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:19.016Z,1528926439.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:19.415Z,1528926439.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:19.809Z,1528926439.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:20.244Z,1528926440.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:20.620Z,1528926440.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:21.011Z,1528926441.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:21.416Z,1528926441.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:21.813Z,1528926441.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:22.214Z,1528926442.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:22.617Z,1528926442.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:23.015Z,1528926443.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:23.418Z,1528926443.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:23.818Z,1528926443.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:24.216Z,1528926444.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:24.611Z,1528926444.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:25.018Z,1528926445.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:25.415Z,1528926445.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:25.815Z,1528926445.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:26.222Z,1528926446.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:26.616Z,1528926446.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:27.012Z,1528926447.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:27.417Z,1528926447.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:27.815Z,1528926447.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:28.216Z,1528926448.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:28.618Z,1528926448.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:29.019Z,1528926449.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:29.415Z,1528926449.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:29.821Z,1528926449.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:30.219Z,1528926450.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:30.614Z,1528926450.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:31.016Z,1528926451.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:31.442Z,1528926451.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:31.839Z,1528926451.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:32.242Z,1528926452.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:32.624Z,1528926452.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:33.028Z,1528926453.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:33.419Z,1528926453.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:33.816Z,1528926453.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:34.215Z,1528926454.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:34.647Z,1528926454.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:35.049Z,1528926455.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:35.416Z,1528926455.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:35.818Z,1528926455.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:36.225Z,1528926456.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:36.615Z,1528926456.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:37.019Z,1528926457.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:37.417Z,1528926457.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:37.828Z,1528926457.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:38.219Z,1528926458.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:38.293Z,1528926458.293 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T21:47:38.293Z,1528926458.293 [NAL9602] No Fault, FailCount= 5
2018-06-13T21:47:38.574Z,1528926458.574 [NAL9602](INFO): Powering up NAL9602
2018-06-13T21:47:38.635Z,1528926458.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:39.016Z,1528926459.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:39.441Z,1528926459.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:39.828Z,1528926459.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:40.219Z,1528926460.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:40.635Z,1528926460.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:41.028Z,1528926461.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:41.420Z,1528926461.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:41.821Z,1528926461.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:42.222Z,1528926462.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:42.643Z,1528926462.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:43.024Z,1528926463.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:43.420Z,1528926463.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:43.815Z,1528926463.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:44.240Z,1528926464.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:44.641Z,1528926464.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:45.016Z,1528926465.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:45.421Z,1528926465.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:45.830Z,1528926465.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:46.222Z,1528926466.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:46.621Z,1528926466.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:47.021Z,1528926467.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:47.436Z,1528926467.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:47.828Z,1528926467.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:48.220Z,1528926468.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:48.619Z,1528926468.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:49.052Z,1528926469.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:49.430Z,1528926469.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:49.775Z,1528926469.775 [NAL9602](INFO): NAL9602 initialized
2018-06-13T21:47:49.825Z,1528926469.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:50.219Z,1528926470.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:50.659Z,1528926470.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:51.032Z,1528926471.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:51.429Z,1528926471.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:51.825Z,1528926471.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:52.234Z,1528926472.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:52.620Z,1528926472.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:53.026Z,1528926473.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:53.429Z,1528926473.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:53.854Z,1528926473.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:54.233Z,1528926474.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:54.618Z,1528926474.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:55.023Z,1528926475.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:55.422Z,1528926475.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:55.815Z,1528926475.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:56.235Z,1528926476.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:56.636Z,1528926476.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:57.060Z,1528926477.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:57.427Z,1528926477.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:57.824Z,1528926477.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:58.223Z,1528926478.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:58.618Z,1528926478.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:59.020Z,1528926479.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:59.436Z,1528926479.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:47:59.837Z,1528926479.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:00.264Z,1528926480.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:00.624Z,1528926480.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:01.018Z,1528926481.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:01.426Z,1528926481.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:01.824Z,1528926481.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:02.220Z,1528926482.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:02.636Z,1528926482.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:03.037Z,1528926483.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:03.432Z,1528926483.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:03.821Z,1528926483.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:04.218Z,1528926484.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:04.619Z,1528926484.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:05.020Z,1528926485.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:05.422Z,1528926485.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:05.830Z,1528926485.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:06.236Z,1528926486.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:06.617Z,1528926486.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:07.022Z,1528926487.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:07.425Z,1528926487.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:07.818Z,1528926487.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:08.222Z,1528926488.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:08.635Z,1528926488.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:09.029Z,1528926489.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:09.434Z,1528926489.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:09.828Z,1528926489.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:10.228Z,1528926490.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:10.631Z,1528926490.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:11.026Z,1528926491.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:11.434Z,1528926491.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:11.839Z,1528926491.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:12.235Z,1528926492.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:12.610Z,1528926492.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:13.041Z,1528926493.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:13.411Z,1528926493.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:13.841Z,1528926493.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:14.216Z,1528926494.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:14.623Z,1528926494.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:15.023Z,1528926495.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:15.427Z,1528926495.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:15.815Z,1528926495.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:16.228Z,1528926496.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:16.621Z,1528926496.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:17.015Z,1528926497.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:17.425Z,1528926497.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:17.824Z,1528926497.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:18.232Z,1528926498.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:18.617Z,1528926498.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:19.028Z,1528926499.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:19.422Z,1528926499.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:19.816Z,1528926499.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:20.221Z,1528926500.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:20.630Z,1528926500.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:21.028Z,1528926501.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:21.436Z,1528926501.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:21.816Z,1528926501.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:22.224Z,1528926502.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:22.618Z,1528926502.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:23.019Z,1528926503.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:23.432Z,1528926503.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:23.830Z,1528926503.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:24.231Z,1528926504.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:24.624Z,1528926504.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:25.024Z,1528926505.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:25.420Z,1528926505.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:25.818Z,1528926505.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:26.224Z,1528926506.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:26.631Z,1528926506.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:27.036Z,1528926507.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:27.427Z,1528926507.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:27.819Z,1528926507.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:28.227Z,1528926508.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:28.620Z,1528926508.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:29.019Z,1528926509.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:29.429Z,1528926509.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:29.836Z,1528926509.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:30.231Z,1528926510.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:30.624Z,1528926510.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:31.020Z,1528926511.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:31.419Z,1528926511.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:31.824Z,1528926511.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:32.232Z,1528926512.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:32.640Z,1528926512.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:33.030Z,1528926513.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:33.432Z,1528926513.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:33.820Z,1528926513.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:34.227Z,1528926514.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:34.618Z,1528926514.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:35.019Z,1528926515.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:35.430Z,1528926515.430 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:35.430Z,1528926515.430 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 366
2018-06-13T21:48:35.430Z,1528926515.430 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:48:35.432Z,1528926515.432 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:35.432Z,1528926515.432 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 366
2018-06-13T21:48:35.432Z,1528926515.432 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:48:35.434Z,1528926515.434 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:35.434Z,1528926515.434 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 366
2018-06-13T21:48:35.434Z,1528926515.434 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:48:35.529Z,1528926515.529 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:48:35.529Z,1528926515.529 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:48:35.530Z,1528926515.530 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:48:35.909Z,1528926515.909 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:48:35.909Z,1528926515.909 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 366
2018-06-13T21:48:35.910Z,1528926515.910 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:48:35.910Z,1528926515.910 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 366
2018-06-13T21:48:35.910Z,1528926515.910 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:48:35.910Z,1528926515.910 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 366
2018-06-13T21:48:36.232Z,1528926516.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:48:36.232Z,1528926516.232 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:48:36.233Z,1528926516.233 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:48:36.233Z,1528926516.233 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:48:36.234Z,1528926516.234 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:48:36.234Z,1528926516.234 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:48:36.234Z,1528926516.234 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:48:36.235Z,1528926516.235 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:48:36.235Z,1528926516.235 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:48:36.608Z,1528926516.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:48:36.622Z,1528926516.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:37.032Z,1528926517.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:48:37.038Z,1528926517.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:37.413Z,1528926517.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:48:37.414Z,1528926517.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:37.836Z,1528926517.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T21:48:37.841Z,1528926517.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:38.212Z,1528926518.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T21:48:38.213Z,1528926518.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:38.643Z,1528926518.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T21:48:38.644Z,1528926518.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:39.039Z,1528926519.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T21:48:39.040Z,1528926519.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:39.423Z,1528926519.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T21:48:39.424Z,1528926519.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:39.817Z,1528926519.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T21:48:39.818Z,1528926519.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:40.214Z,1528926520.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T21:48:40.215Z,1528926520.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:40.616Z,1528926520.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T21:48:40.617Z,1528926520.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:41.015Z,1528926521.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T21:48:41.016Z,1528926521.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:41.419Z,1528926521.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T21:48:41.420Z,1528926521.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:41.844Z,1528926521.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T21:48:41.849Z,1528926521.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:42.249Z,1528926522.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T21:48:42.250Z,1528926522.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:42.614Z,1528926522.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T21:48:42.615Z,1528926522.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:43.015Z,1528926523.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T21:48:43.016Z,1528926523.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:43.416Z,1528926523.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T21:48:43.417Z,1528926523.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:43.816Z,1528926523.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T21:48:43.818Z,1528926523.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:44.216Z,1528926524.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T21:48:44.217Z,1528926524.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:44.650Z,1528926524.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T21:48:44.651Z,1528926524.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:45.027Z,1528926525.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T21:48:45.028Z,1528926525.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:45.424Z,1528926525.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T21:48:45.425Z,1528926525.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:45.824Z,1528926525.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T21:48:45.825Z,1528926525.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:46.218Z,1528926526.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T21:48:46.219Z,1528926526.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:46.619Z,1528926526.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T21:48:46.620Z,1528926526.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:47.019Z,1528926527.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T21:48:47.020Z,1528926527.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:47.423Z,1528926527.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T21:48:47.424Z,1528926527.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:47.827Z,1528926527.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T21:48:47.828Z,1528926527.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:48.227Z,1528926528.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T21:48:48.228Z,1528926528.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:48.620Z,1528926528.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T21:48:48.622Z,1528926528.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:49.019Z,1528926529.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T21:48:49.020Z,1528926529.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:49.424Z,1528926529.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T21:48:49.425Z,1528926529.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:49.816Z,1528926529.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T21:48:49.818Z,1528926529.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:50.226Z,1528926530.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T21:48:50.227Z,1528926530.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:50.631Z,1528926530.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T21:48:50.632Z,1528926530.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:51.020Z,1528926531.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T21:48:51.021Z,1528926531.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:51.425Z,1528926531.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T21:48:51.426Z,1528926531.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:51.824Z,1528926531.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T21:48:51.825Z,1528926531.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:52.212Z,1528926532.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T21:48:52.213Z,1528926532.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:52.618Z,1528926532.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T21:48:52.619Z,1528926532.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:53.019Z,1528926533.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T21:48:53.020Z,1528926533.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:53.421Z,1528926533.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T21:48:53.422Z,1528926533.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:53.827Z,1528926533.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T21:48:53.828Z,1528926533.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:54.228Z,1528926534.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T21:48:54.229Z,1528926534.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:54.615Z,1528926534.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T21:48:54.616Z,1528926534.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:55.024Z,1528926535.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T21:48:55.029Z,1528926535.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:55.436Z,1528926535.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:55.816Z,1528926535.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:56.220Z,1528926536.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:56.628Z,1528926536.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:57.030Z,1528926537.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:57.425Z,1528926537.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:57.830Z,1528926537.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:58.217Z,1528926538.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:58.621Z,1528926538.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:59.022Z,1528926539.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:59.425Z,1528926539.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:48:59.831Z,1528926539.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:00.232Z,1528926540.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:00.615Z,1528926540.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:01.020Z,1528926541.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:01.434Z,1528926541.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:01.816Z,1528926541.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:02.219Z,1528926542.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:02.630Z,1528926542.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:03.029Z,1528926543.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:03.429Z,1528926543.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:03.821Z,1528926543.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:04.215Z,1528926544.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:04.631Z,1528926544.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:05.022Z,1528926545.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:05.425Z,1528926545.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:05.828Z,1528926545.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:06.236Z,1528926546.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:06.616Z,1528926546.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:07.024Z,1528926547.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:07.421Z,1528926547.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:07.827Z,1528926547.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:08.218Z,1528926548.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:08.631Z,1528926548.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:09.036Z,1528926549.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:09.049Z,1528926549.049 [CommandLine](IMPORTANT): Deactivating dropweight wire
2018-06-13T21:49:09.429Z,1528926549.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:09.821Z,1528926549.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:09.824Z,1528926549.824 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-06-13T21:49:09.824Z,1528926549.824 [Default:CheckIn:C.Wait] Stopped
2018-06-13T21:49:09.824Z,1528926549.824 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-06-13T21:49:09.824Z,1528926549.824 [Default:CheckIn:D] Running Loop=1
2018-06-13T21:49:10.219Z,1528926550.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:10.222Z,1528926550.222 [Default:CheckIn:D] Stopped
2018-06-13T21:49:10.222Z,1528926550.222 [Default:CheckIn:E] Running Loop=1
2018-06-13T21:49:10.622Z,1528926550.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:10.626Z,1528926550.626 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1101.946224 min 
2018-06-13T21:49:10.626Z,1528926550.626 [Default:CheckIn:E] Stopped
2018-06-13T21:49:10.626Z,1528926550.626 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-06-13T21:49:10.626Z,1528926550.626 [Default:CheckIn] Stopped
2018-06-13T21:49:10.626Z,1528926550.626 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T21:49:10.626Z,1528926550.626 [Default:CheckIn](INFO): Running loop #95
2018-06-13T21:49:10.626Z,1528926550.626 [Default:CheckIn] Running Loop=95
2018-06-13T21:49:10.627Z,1528926550.627 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-06-13T21:49:10.627Z,1528926550.627 [Default:CheckIn:Read_GPS] Running Loop=1
2018-06-13T21:49:11.021Z,1528926551.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:11.434Z,1528926551.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:11.837Z,1528926551.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:12.239Z,1528926552.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:12.610Z,1528926552.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:13.024Z,1528926553.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:13.428Z,1528926553.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:13.816Z,1528926553.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:14.219Z,1528926554.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:14.629Z,1528926554.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:15.023Z,1528926555.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:15.424Z,1528926555.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:15.824Z,1528926555.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:16.215Z,1528926556.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:16.619Z,1528926556.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:17.028Z,1528926557.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:17.432Z,1528926557.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:17.827Z,1528926557.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:18.236Z,1528926558.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:18.616Z,1528926558.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:19.017Z,1528926559.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:19.442Z,1528926559.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:19.829Z,1528926559.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:20.226Z,1528926560.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:20.622Z,1528926560.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:21.024Z,1528926561.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:21.429Z,1528926561.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:21.831Z,1528926561.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:22.226Z,1528926562.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:22.622Z,1528926562.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:23.021Z,1528926563.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:23.429Z,1528926563.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:23.833Z,1528926563.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:24.235Z,1528926564.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:24.619Z,1528926564.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:25.020Z,1528926565.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:25.441Z,1528926565.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:25.831Z,1528926565.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:26.232Z,1528926566.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:26.629Z,1528926566.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:27.028Z,1528926567.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:27.431Z,1528926567.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:27.835Z,1528926567.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:28.235Z,1528926568.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:28.623Z,1528926568.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:29.022Z,1528926569.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:29.432Z,1528926569.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:29.840Z,1528926569.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:30.241Z,1528926570.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:30.627Z,1528926570.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:31.028Z,1528926571.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:31.444Z,1528926571.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:31.830Z,1528926571.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:32.230Z,1528926572.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:32.637Z,1528926572.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:33.023Z,1528926573.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:33.430Z,1528926573.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:33.835Z,1528926573.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:34.227Z,1528926574.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:34.622Z,1528926574.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:35.028Z,1528926575.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:35.430Z,1528926575.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:35.835Z,1528926575.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:36.236Z,1528926576.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:36.626Z,1528926576.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:37.022Z,1528926577.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:37.447Z,1528926577.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:37.832Z,1528926577.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:38.231Z,1528926578.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:38.626Z,1528926578.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:39.028Z,1528926579.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:39.431Z,1528926579.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:39.844Z,1528926579.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:40.228Z,1528926580.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:40.629Z,1528926580.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:41.038Z,1528926581.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:41.426Z,1528926581.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:41.834Z,1528926581.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:42.235Z,1528926582.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:42.626Z,1528926582.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:43.028Z,1528926583.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:43.435Z,1528926583.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:43.830Z,1528926583.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:44.230Z,1528926584.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:44.629Z,1528926584.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:45.022Z,1528926585.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:45.430Z,1528926585.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:45.840Z,1528926585.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:46.226Z,1528926586.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:46.622Z,1528926586.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:47.032Z,1528926587.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:47.427Z,1528926587.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:47.831Z,1528926587.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:48.236Z,1528926588.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:48.622Z,1528926588.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:49.028Z,1528926589.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:49.436Z,1528926589.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:49.830Z,1528926589.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:50.231Z,1528926590.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:50.637Z,1528926590.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:51.022Z,1528926591.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:51.430Z,1528926591.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:51.835Z,1528926591.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:52.235Z,1528926592.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:52.628Z,1528926592.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:53.036Z,1528926593.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:53.428Z,1528926593.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:53.828Z,1528926593.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:54.232Z,1528926594.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:54.635Z,1528926594.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:55.054Z,1528926595.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:55.444Z,1528926595.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:55.815Z,1528926595.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:56.218Z,1528926596.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:56.665Z,1528926596.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:57.063Z,1528926597.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:57.423Z,1528926597.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:57.822Z,1528926597.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:58.216Z,1528926598.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:58.626Z,1528926598.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:59.022Z,1528926599.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:59.415Z,1528926599.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:49:59.828Z,1528926599.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:00.298Z,1528926600.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:00.632Z,1528926600.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:01.015Z,1528926601.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:01.420Z,1528926601.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:01.817Z,1528926601.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:02.220Z,1528926602.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:02.626Z,1528926602.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:03.024Z,1528926603.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:03.430Z,1528926603.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:03.826Z,1528926603.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:04.219Z,1528926604.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:04.624Z,1528926604.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:05.021Z,1528926605.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:05.419Z,1528926605.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:05.840Z,1528926605.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:06.262Z,1528926606.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:06.628Z,1528926606.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:07.018Z,1528926607.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:07.419Z,1528926607.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:07.818Z,1528926607.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:08.218Z,1528926608.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:08.631Z,1528926608.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:09.029Z,1528926609.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:09.433Z,1528926609.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:09.819Z,1528926609.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:10.218Z,1528926610.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:10.618Z,1528926610.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:11.019Z,1528926611.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:11.419Z,1528926611.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:11.826Z,1528926611.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:12.242Z,1528926612.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:12.626Z,1528926612.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:13.028Z,1528926613.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:13.429Z,1528926613.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:13.830Z,1528926613.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:14.227Z,1528926614.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:14.631Z,1528926614.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:15.032Z,1528926615.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:15.427Z,1528926615.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:15.828Z,1528926615.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:16.222Z,1528926616.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:16.628Z,1528926616.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:17.029Z,1528926617.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:17.430Z,1528926617.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:17.835Z,1528926617.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:18.236Z,1528926618.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:18.628Z,1528926618.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:19.021Z,1528926619.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:19.409Z,1528926619.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:19.810Z,1528926619.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:20.226Z,1528926620.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:20.638Z,1528926620.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:21.050Z,1528926621.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:21.448Z,1528926621.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:21.816Z,1528926621.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:22.217Z,1528926622.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:22.625Z,1528926622.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:23.061Z,1528926623.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:23.436Z,1528926623.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:23.864Z,1528926623.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:24.244Z,1528926624.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:24.636Z,1528926624.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:25.025Z,1528926625.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:25.409Z,1528926625.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:25.813Z,1528926625.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:26.213Z,1528926626.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:26.647Z,1528926626.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:27.023Z,1528926627.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:27.423Z,1528926627.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:27.817Z,1528926627.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:28.217Z,1528926628.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:28.616Z,1528926628.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:29.012Z,1528926629.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:29.412Z,1528926629.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:29.844Z,1528926629.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:30.228Z,1528926630.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:30.624Z,1528926630.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:31.015Z,1528926631.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:31.420Z,1528926631.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:31.824Z,1528926631.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:32.215Z,1528926632.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:32.623Z,1528926632.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:33.023Z,1528926633.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:33.420Z,1528926633.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:33.816Z,1528926633.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:34.224Z,1528926634.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:34.617Z,1528926634.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:35.029Z,1528926635.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:35.419Z,1528926635.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:35.865Z,1528926635.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:36.228Z,1528926636.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:36.624Z,1528926636.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:37.018Z,1528926637.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:37.424Z,1528926637.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:37.816Z,1528926637.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:38.226Z,1528926638.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:38.624Z,1528926638.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:39.023Z,1528926639.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:39.424Z,1528926639.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:39.820Z,1528926639.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:40.225Z,1528926640.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:40.626Z,1528926640.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:41.017Z,1528926641.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:41.415Z,1528926641.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:41.824Z,1528926641.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:42.254Z,1528926642.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:42.620Z,1528926642.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:43.025Z,1528926643.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:43.417Z,1528926643.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:43.815Z,1528926643.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:44.221Z,1528926644.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:44.632Z,1528926644.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:45.028Z,1528926645.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:45.424Z,1528926645.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:45.832Z,1528926645.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:46.215Z,1528926646.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:46.620Z,1528926646.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:47.023Z,1528926647.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:47.415Z,1528926647.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:47.824Z,1528926647.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:48.230Z,1528926648.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:48.626Z,1528926648.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:49.019Z,1528926649.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:49.421Z,1528926649.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:49.819Z,1528926649.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:50.219Z,1528926650.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:50.628Z,1528926650.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:51.027Z,1528926651.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:51.428Z,1528926651.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:51.822Z,1528926651.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:52.220Z,1528926652.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:52.616Z,1528926652.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:53.022Z,1528926653.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:53.416Z,1528926653.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:53.836Z,1528926653.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:54.236Z,1528926654.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:54.626Z,1528926654.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:55.020Z,1528926655.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:55.422Z,1528926655.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:55.820Z,1528926655.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:56.225Z,1528926656.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:56.635Z,1528926656.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:57.030Z,1528926657.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:57.425Z,1528926657.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:57.835Z,1528926657.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:58.218Z,1528926658.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:58.619Z,1528926658.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:59.021Z,1528926659.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:59.417Z,1528926659.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:50:59.826Z,1528926659.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:00.239Z,1528926660.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:00.627Z,1528926660.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:01.028Z,1528926661.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:01.426Z,1528926661.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:01.826Z,1528926661.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:02.239Z,1528926662.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:02.636Z,1528926662.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:03.030Z,1528926663.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:03.432Z,1528926663.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:03.822Z,1528926663.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:04.226Z,1528926664.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:04.629Z,1528926664.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:05.011Z,1528926665.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:05.413Z,1528926665.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:05.837Z,1528926665.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:06.239Z,1528926666.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:06.637Z,1528926666.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:07.012Z,1528926667.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:07.414Z,1528926667.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:07.820Z,1528926667.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:08.239Z,1528926668.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:08.624Z,1528926668.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:09.023Z,1528926669.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:09.420Z,1528926669.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:09.817Z,1528926669.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:10.215Z,1528926670.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:10.614Z,1528926670.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:11.018Z,1528926671.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:11.415Z,1528926671.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:11.824Z,1528926671.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:12.225Z,1528926672.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:12.620Z,1528926672.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:13.015Z,1528926673.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:13.416Z,1528926673.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:13.816Z,1528926673.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:14.226Z,1528926674.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:14.628Z,1528926674.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:15.023Z,1528926675.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:15.424Z,1528926675.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:15.826Z,1528926675.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:16.215Z,1528926676.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:16.619Z,1528926676.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:17.018Z,1528926677.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:17.416Z,1528926677.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:17.826Z,1528926677.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:18.226Z,1528926678.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:18.632Z,1528926678.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:19.016Z,1528926679.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:19.424Z,1528926679.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:19.818Z,1528926679.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:20.219Z,1528926680.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:20.631Z,1528926680.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:21.029Z,1528926681.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:21.431Z,1528926681.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:21.831Z,1528926681.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:22.222Z,1528926682.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:22.623Z,1528926682.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:23.021Z,1528926683.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:23.416Z,1528926683.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:23.833Z,1528926683.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:24.243Z,1528926684.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:24.632Z,1528926684.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:25.022Z,1528926685.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:25.434Z,1528926685.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:25.810Z,1528926685.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:26.213Z,1528926686.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:26.639Z,1528926686.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:27.038Z,1528926687.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:27.441Z,1528926687.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:27.814Z,1528926687.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:28.213Z,1528926688.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:28.636Z,1528926688.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:29.047Z,1528926689.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:29.444Z,1528926689.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:29.815Z,1528926689.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:30.220Z,1528926690.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:30.620Z,1528926690.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:31.027Z,1528926691.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:31.451Z,1528926691.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:31.819Z,1528926691.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:32.217Z,1528926692.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:32.645Z,1528926692.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:33.031Z,1528926693.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:33.432Z,1528926693.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:33.821Z,1528926693.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:34.216Z,1528926694.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:34.625Z,1528926694.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:35.026Z,1528926695.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:35.432Z,1528926695.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:35.816Z,1528926695.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:36.221Z,1528926696.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:36.632Z,1528926696.632 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:36.632Z,1528926696.632 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 367
2018-06-13T21:51:36.632Z,1528926696.632 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:51:36.651Z,1528926696.651 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:36.651Z,1528926696.651 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 367
2018-06-13T21:51:36.651Z,1528926696.651 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:51:36.657Z,1528926696.657 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:36.657Z,1528926696.657 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 367
2018-06-13T21:51:36.657Z,1528926696.657 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:51:36.746Z,1528926696.746 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:51:36.746Z,1528926696.746 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:51:36.746Z,1528926696.746 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:51:37.101Z,1528926697.101 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:51:37.101Z,1528926697.101 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 367
2018-06-13T21:51:37.102Z,1528926697.102 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:51:37.102Z,1528926697.102 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 367
2018-06-13T21:51:37.102Z,1528926697.102 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:51:37.102Z,1528926697.102 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 367
2018-06-13T21:51:37.439Z,1528926697.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:51:37.440Z,1528926697.440 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:51:37.440Z,1528926697.440 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:51:37.440Z,1528926697.440 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:51:37.445Z,1528926697.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:51:37.445Z,1528926697.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:51:37.445Z,1528926697.445 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:51:37.446Z,1528926697.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:51:37.446Z,1528926697.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:51:37.817Z,1528926697.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:51:37.818Z,1528926697.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:38.228Z,1528926698.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:51:38.233Z,1528926698.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:38.631Z,1528926698.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:51:38.632Z,1528926698.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:39.034Z,1528926699.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T21:51:39.034Z,1528926699.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:39.429Z,1528926699.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T21:51:39.430Z,1528926699.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:39.823Z,1528926699.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T21:51:39.824Z,1528926699.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:40.222Z,1528926700.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T21:51:40.223Z,1528926700.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:40.629Z,1528926700.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T21:51:40.630Z,1528926700.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:41.034Z,1528926701.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T21:51:41.035Z,1528926701.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:41.428Z,1528926701.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T21:51:41.429Z,1528926701.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:41.828Z,1528926701.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2018-06-13T21:51:41.829Z,1528926701.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:42.241Z,1528926702.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2018-06-13T21:51:42.242Z,1528926702.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:42.628Z,1528926702.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T21:51:42.629Z,1528926702.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:43.034Z,1528926703.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T21:51:43.035Z,1528926703.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:43.431Z,1528926703.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2018-06-13T21:51:43.432Z,1528926703.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:43.823Z,1528926703.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2018-06-13T21:51:43.823Z,1528926703.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:44.221Z,1528926704.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2018-06-13T21:51:44.222Z,1528926704.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:44.633Z,1528926704.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T21:51:44.634Z,1528926704.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:45.036Z,1528926705.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T21:51:45.037Z,1528926705.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:45.434Z,1528926705.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T21:51:45.435Z,1528926705.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:45.826Z,1528926705.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T21:51:45.827Z,1528926705.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:46.222Z,1528926706.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T21:51:46.223Z,1528926706.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:46.631Z,1528926706.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T21:51:46.632Z,1528926706.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:47.034Z,1528926707.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T21:51:47.035Z,1528926707.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:47.429Z,1528926707.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T21:51:47.430Z,1528926707.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:47.835Z,1528926707.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T21:51:47.836Z,1528926707.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:48.236Z,1528926708.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T21:51:48.241Z,1528926708.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:48.632Z,1528926708.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T21:51:48.633Z,1528926708.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:49.033Z,1528926709.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T21:51:49.034Z,1528926709.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:49.434Z,1528926709.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T21:51:49.435Z,1528926709.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:49.831Z,1528926709.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T21:51:49.832Z,1528926709.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:50.225Z,1528926710.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T21:51:50.226Z,1528926710.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:50.635Z,1528926710.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T21:51:50.636Z,1528926710.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:51.033Z,1528926711.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T21:51:51.034Z,1528926711.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:51.435Z,1528926711.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T21:51:51.436Z,1528926711.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:51.838Z,1528926711.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T21:51:51.839Z,1528926711.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:52.226Z,1528926712.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T21:51:52.227Z,1528926712.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:52.635Z,1528926712.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T21:51:52.635Z,1528926712.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:53.037Z,1528926713.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T21:51:53.038Z,1528926713.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:53.429Z,1528926713.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T21:51:53.430Z,1528926713.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:53.824Z,1528926713.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T21:51:53.825Z,1528926713.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:54.232Z,1528926714.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T21:51:54.233Z,1528926714.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:54.634Z,1528926714.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T21:51:54.635Z,1528926714.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:55.040Z,1528926715.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T21:51:55.041Z,1528926715.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:55.435Z,1528926715.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T21:51:55.436Z,1528926715.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:55.835Z,1528926715.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T21:51:55.836Z,1528926715.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:56.228Z,1528926716.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T21:51:56.229Z,1528926716.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:56.644Z,1528926716.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:57.032Z,1528926717.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:57.438Z,1528926717.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:57.838Z,1528926717.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:58.225Z,1528926718.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:58.633Z,1528926718.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:59.039Z,1528926719.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:59.435Z,1528926719.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:51:59.828Z,1528926719.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:00.234Z,1528926720.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:00.648Z,1528926720.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:01.072Z,1528926721.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:01.449Z,1528926721.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:01.832Z,1528926721.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:02.243Z,1528926722.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:02.629Z,1528926722.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:03.036Z,1528926723.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:03.448Z,1528926723.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:03.850Z,1528926723.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:04.243Z,1528926724.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:04.635Z,1528926724.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:05.017Z,1528926725.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:05.446Z,1528926725.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:05.844Z,1528926725.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:06.250Z,1528926726.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:06.643Z,1528926726.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:07.048Z,1528926727.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:07.415Z,1528926727.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:07.820Z,1528926727.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:08.222Z,1528926728.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:08.649Z,1528926728.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:09.024Z,1528926729.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:09.428Z,1528926729.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:09.827Z,1528926729.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:10.253Z,1528926730.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:10.619Z,1528926730.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:11.023Z,1528926731.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:11.420Z,1528926731.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:11.824Z,1528926731.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:12.226Z,1528926732.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:12.628Z,1528926732.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:13.033Z,1528926733.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:13.415Z,1528926733.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:13.816Z,1528926733.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:14.224Z,1528926734.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:14.621Z,1528926734.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:15.028Z,1528926735.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:15.429Z,1528926735.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:15.834Z,1528926735.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:16.220Z,1528926736.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:16.619Z,1528926736.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:17.016Z,1528926737.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:17.415Z,1528926737.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:17.830Z,1528926737.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:18.228Z,1528926738.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:18.630Z,1528926738.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:19.026Z,1528926739.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:19.425Z,1528926739.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:19.824Z,1528926739.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:20.224Z,1528926740.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:20.625Z,1528926740.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:21.031Z,1528926741.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:21.430Z,1528926741.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:21.830Z,1528926741.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:22.218Z,1528926742.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:22.624Z,1528926742.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:23.020Z,1528926743.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:23.424Z,1528926743.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:23.826Z,1528926743.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:24.240Z,1528926744.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:24.629Z,1528926744.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:25.024Z,1528926745.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:25.419Z,1528926745.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:25.825Z,1528926745.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:26.218Z,1528926746.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:26.623Z,1528926746.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:27.030Z,1528926747.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:27.435Z,1528926747.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:27.836Z,1528926747.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:28.218Z,1528926748.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:28.624Z,1528926748.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:29.019Z,1528926749.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:29.424Z,1528926749.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:29.828Z,1528926749.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:30.231Z,1528926750.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:30.626Z,1528926750.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:31.024Z,1528926751.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:31.419Z,1528926751.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:31.829Z,1528926751.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:32.223Z,1528926752.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:32.623Z,1528926752.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:33.035Z,1528926753.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:33.429Z,1528926753.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:33.831Z,1528926753.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:34.226Z,1528926754.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:34.621Z,1528926754.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:35.020Z,1528926755.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:35.421Z,1528926755.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:35.828Z,1528926755.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:36.240Z,1528926756.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:36.630Z,1528926756.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:37.028Z,1528926757.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:37.424Z,1528926757.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:37.831Z,1528926757.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:38.231Z,1528926758.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:38.626Z,1528926758.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:39.033Z,1528926759.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:39.436Z,1528926759.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:39.840Z,1528926759.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:40.296Z,1528926760.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:40.613Z,1528926760.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:41.045Z,1528926761.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:41.413Z,1528926761.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:41.848Z,1528926761.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:42.243Z,1528926762.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:42.640Z,1528926762.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:43.016Z,1528926763.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:43.413Z,1528926763.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:43.813Z,1528926763.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:44.216Z,1528926764.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:44.618Z,1528926764.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:45.020Z,1528926765.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:45.423Z,1528926765.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:45.824Z,1528926765.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:46.247Z,1528926766.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:46.620Z,1528926766.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:47.021Z,1528926767.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:47.420Z,1528926767.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:47.828Z,1528926767.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:48.228Z,1528926768.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:48.632Z,1528926768.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:49.016Z,1528926769.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:49.427Z,1528926769.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:49.816Z,1528926769.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:50.228Z,1528926770.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:50.622Z,1528926770.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:51.032Z,1528926771.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:51.432Z,1528926771.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:51.831Z,1528926771.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:52.218Z,1528926772.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:52.619Z,1528926772.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:53.032Z,1528926773.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:53.423Z,1528926773.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:53.830Z,1528926773.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:54.235Z,1528926774.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:54.628Z,1528926774.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:55.022Z,1528926775.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:55.428Z,1528926775.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:55.826Z,1528926775.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:56.232Z,1528926776.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:56.624Z,1528926776.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:57.026Z,1528926777.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:57.430Z,1528926777.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:57.831Z,1528926777.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:58.222Z,1528926778.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:58.625Z,1528926778.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:59.032Z,1528926779.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:59.430Z,1528926779.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:52:59.828Z,1528926779.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:00.236Z,1528926780.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:00.634Z,1528926780.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:01.034Z,1528926781.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:01.426Z,1528926781.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:01.809Z,1528926781.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:02.236Z,1528926782.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:02.613Z,1528926782.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:03.045Z,1528926783.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:03.423Z,1528926783.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:03.848Z,1528926783.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:04.214Z,1528926784.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:04.615Z,1528926784.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:05.040Z,1528926785.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:05.415Z,1528926785.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:05.832Z,1528926785.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:06.230Z,1528926786.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:06.625Z,1528926786.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:07.015Z,1528926787.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:07.417Z,1528926787.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:07.820Z,1528926787.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:08.217Z,1528926788.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:08.628Z,1528926788.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:09.026Z,1528926789.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:09.436Z,1528926789.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:09.836Z,1528926789.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:10.239Z,1528926790.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:10.622Z,1528926790.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:11.020Z,1528926791.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:11.424Z,1528926791.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:11.832Z,1528926791.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:12.230Z,1528926792.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:12.627Z,1528926792.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:13.019Z,1528926793.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:13.421Z,1528926793.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:13.824Z,1528926793.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:14.218Z,1528926794.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:14.628Z,1528926794.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:15.027Z,1528926795.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:15.434Z,1528926795.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:15.834Z,1528926795.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:16.221Z,1528926796.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:16.618Z,1528926796.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:17.022Z,1528926797.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:17.420Z,1528926797.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:17.832Z,1528926797.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:18.231Z,1528926798.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:18.628Z,1528926798.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:19.024Z,1528926799.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:19.423Z,1528926799.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:19.824Z,1528926799.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:20.219Z,1528926800.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:20.627Z,1528926800.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:21.027Z,1528926801.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:21.440Z,1528926801.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:21.831Z,1528926801.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:22.219Z,1528926802.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:22.624Z,1528926802.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:23.041Z,1528926803.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:23.424Z,1528926803.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:23.830Z,1528926803.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:24.243Z,1528926804.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:24.626Z,1528926804.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:25.022Z,1528926805.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:25.425Z,1528926805.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:25.823Z,1528926805.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:26.231Z,1528926806.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:26.632Z,1528926806.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:27.031Z,1528926807.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:27.441Z,1528926807.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:27.835Z,1528926807.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:28.228Z,1528926808.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:28.627Z,1528926808.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:29.028Z,1528926809.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:29.427Z,1528926809.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:29.836Z,1528926809.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:30.236Z,1528926810.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:30.628Z,1528926810.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:31.030Z,1528926811.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:31.434Z,1528926811.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:31.839Z,1528926811.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:32.236Z,1528926812.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:32.639Z,1528926812.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:33.013Z,1528926813.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:33.412Z,1528926813.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:33.814Z,1528926813.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:34.220Z,1528926814.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:34.620Z,1528926814.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:35.040Z,1528926815.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:35.423Z,1528926815.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:35.820Z,1528926815.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:36.217Z,1528926816.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:36.615Z,1528926816.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:37.013Z,1528926817.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:37.416Z,1528926817.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:37.821Z,1528926817.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:38.244Z,1528926818.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:38.624Z,1528926818.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:39.015Z,1528926819.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:39.415Z,1528926819.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:39.824Z,1528926819.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:40.224Z,1528926820.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:40.619Z,1528926820.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:41.017Z,1528926821.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:41.414Z,1528926821.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:41.828Z,1528926821.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:42.251Z,1528926822.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:42.628Z,1528926822.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:43.016Z,1528926823.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:43.424Z,1528926823.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:43.820Z,1528926823.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:44.249Z,1528926824.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:44.625Z,1528926824.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:45.016Z,1528926825.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:45.419Z,1528926825.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:45.824Z,1528926825.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:46.224Z,1528926826.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:46.624Z,1528926826.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:47.024Z,1528926827.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:47.416Z,1528926827.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:47.824Z,1528926827.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:48.224Z,1528926828.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:48.624Z,1528926828.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:49.016Z,1528926829.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:49.428Z,1528926829.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:49.824Z,1528926829.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:50.231Z,1528926830.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:50.632Z,1528926830.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:51.016Z,1528926831.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:51.431Z,1528926831.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:51.832Z,1528926831.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:52.225Z,1528926832.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:52.624Z,1528926832.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:53.017Z,1528926833.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:53.414Z,1528926833.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:53.832Z,1528926833.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:54.232Z,1528926834.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:54.625Z,1528926834.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:55.020Z,1528926835.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:55.421Z,1528926835.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:55.825Z,1528926835.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:56.231Z,1528926836.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:56.632Z,1528926836.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:57.024Z,1528926837.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:57.420Z,1528926837.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:57.836Z,1528926837.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:58.237Z,1528926838.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:58.628Z,1528926838.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:59.022Z,1528926839.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:59.424Z,1528926839.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:53:59.832Z,1528926839.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:00.232Z,1528926840.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:00.626Z,1528926840.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:01.022Z,1528926841.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:01.419Z,1528926841.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:01.830Z,1528926841.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:02.230Z,1528926842.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:02.630Z,1528926842.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:03.018Z,1528926843.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:03.418Z,1528926843.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:03.831Z,1528926843.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:04.230Z,1528926844.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:04.630Z,1528926844.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:05.020Z,1528926845.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:05.414Z,1528926845.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:05.831Z,1528926845.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:06.231Z,1528926846.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:06.627Z,1528926846.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:07.021Z,1528926847.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:07.420Z,1528926847.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:07.827Z,1528926847.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:08.230Z,1528926848.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:08.630Z,1528926848.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:09.024Z,1528926849.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:09.424Z,1528926849.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:09.831Z,1528926849.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:10.236Z,1528926850.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:10.627Z,1528926850.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:10.631Z,1528926850.631 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-06-13T21:49:10.6Z
2018-06-13T21:54:10.631Z,1528926850.631 [Default:CheckIn:Read_GPS] Stopped
2018-06-13T21:54:10.631Z,1528926850.631 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-06-13T21:54:11.019Z,1528926851.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:11.416Z,1528926851.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:11.839Z,1528926851.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:12.230Z,1528926852.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:13.385Z,1528926853.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:13.544Z,1528926853.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:13.930Z,1528926853.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:14.333Z,1528926854.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:14.736Z,1528926854.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:15.123Z,1528926855.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:15.523Z,1528926855.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:15.934Z,1528926855.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:16.331Z,1528926856.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:16.751Z,1528926856.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:17.136Z,1528926857.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:18.291Z,1528926858.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:18.442Z,1528926858.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:18.842Z,1528926858.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:19.246Z,1528926859.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:19.638Z,1528926859.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:20.026Z,1528926860.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:20.442Z,1528926860.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:20.851Z,1528926860.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:21.231Z,1528926861.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:21.678Z,1528926861.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:22.826Z,1528926862.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:22.956Z,1528926862.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:23.386Z,1528926863.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:23.785Z,1528926863.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:24.183Z,1528926864.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:24.560Z,1528926864.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:24.955Z,1528926864.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:25.361Z,1528926865.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:25.788Z,1528926865.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:26.167Z,1528926866.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:27.545Z,1528926867.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:27.686Z,1528926867.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:28.106Z,1528926868.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:28.506Z,1528926868.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:28.901Z,1528926868.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:29.300Z,1528926869.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:29.694Z,1528926869.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:30.094Z,1528926870.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:30.516Z,1528926870.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:30.908Z,1528926870.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:32.067Z,1528926872.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:32.242Z,1528926872.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:32.639Z,1528926872.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:33.048Z,1528926873.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:33.443Z,1528926873.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:33.841Z,1528926873.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:34.220Z,1528926874.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:34.647Z,1528926874.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:35.046Z,1528926875.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:36.195Z,1528926876.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:36.345Z,1528926876.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:36.749Z,1528926876.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:37.150Z,1528926877.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:37.549Z,1528926877.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:37.549Z,1528926877.549 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 368
2018-06-13T21:54:37.549Z,1528926877.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:54:37.551Z,1528926877.551 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:37.551Z,1528926877.551 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 368
2018-06-13T21:54:37.551Z,1528926877.551 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:54:37.553Z,1528926877.553 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:37.553Z,1528926877.553 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 368
2018-06-13T21:54:37.553Z,1528926877.553 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:54:37.633Z,1528926877.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:54:37.633Z,1528926877.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:54:37.634Z,1528926877.634 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:54:38.017Z,1528926878.017 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:54:38.017Z,1528926878.017 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 368
2018-06-13T21:54:38.018Z,1528926878.018 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:54:38.018Z,1528926878.018 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 368
2018-06-13T21:54:38.018Z,1528926878.018 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:54:38.018Z,1528926878.018 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 368
2018-06-13T21:54:38.328Z,1528926878.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:54:38.328Z,1528926878.328 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:54:38.329Z,1528926878.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:54:38.329Z,1528926878.329 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:54:38.330Z,1528926878.330 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:54:38.330Z,1528926878.330 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:54:38.330Z,1528926878.330 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:54:38.331Z,1528926878.331 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:54:38.331Z,1528926878.331 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:54:38.772Z,1528926878.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:54:38.773Z,1528926878.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:39.164Z,1528926879.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:54:39.165Z,1528926879.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:40.313Z,1528926880.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T21:54:40.314Z,1528926880.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:40.471Z,1528926880.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T21:54:40.472Z,1528926880.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:40.881Z,1528926880.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T21:54:40.882Z,1528926880.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:41.250Z,1528926881.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T21:54:41.251Z,1528926881.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:41.676Z,1528926881.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T21:54:41.677Z,1528926881.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:42.071Z,1528926882.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T21:54:42.072Z,1528926882.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:42.474Z,1528926882.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T21:54:42.475Z,1528926882.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:42.888Z,1528926882.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T21:54:42.889Z,1528926882.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:43.273Z,1528926883.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T21:54:43.274Z,1528926883.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:43.656Z,1528926883.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T21:54:43.656Z,1528926883.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:44.931Z,1528926884.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T21:54:44.932Z,1528926884.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:45.087Z,1528926885.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T21:54:45.088Z,1528926885.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:45.486Z,1528926885.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T21:54:45.487Z,1528926885.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:45.890Z,1528926885.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T21:54:45.891Z,1528926885.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:46.286Z,1528926886.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T21:54:46.287Z,1528926886.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:46.678Z,1528926886.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T21:54:46.679Z,1528926886.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:47.079Z,1528926887.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T21:54:47.080Z,1528926887.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:47.476Z,1528926887.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T21:54:47.478Z,1528926887.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:47.892Z,1528926887.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T21:54:47.894Z,1528926887.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:48.285Z,1528926888.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T21:54:48.286Z,1528926888.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:49.493Z,1528926889.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T21:54:49.494Z,1528926889.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:49.648Z,1528926889.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2018-06-13T21:54:49.649Z,1528926889.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:50.040Z,1528926890.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2018-06-13T21:54:50.042Z,1528926890.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:50.441Z,1528926890.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T21:54:50.442Z,1528926890.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:50.840Z,1528926890.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2018-06-13T21:54:50.841Z,1528926890.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:51.232Z,1528926891.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T21:54:51.233Z,1528926891.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:51.639Z,1528926891.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T21:54:51.640Z,1528926891.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:52.028Z,1528926892.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T21:54:52.045Z,1528926892.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:52.424Z,1528926892.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T21:54:52.425Z,1528926892.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:52.853Z,1528926892.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T21:54:52.854Z,1528926892.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:53.263Z,1528926893.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T21:54:53.264Z,1528926893.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:54.438Z,1528926894.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T21:54:54.439Z,1528926894.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:54.606Z,1528926894.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T21:54:54.607Z,1528926894.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:55.019Z,1528926895.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T21:54:55.020Z,1528926895.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:55.421Z,1528926895.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T21:54:55.422Z,1528926895.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:55.825Z,1528926895.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T21:54:55.826Z,1528926895.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:56.215Z,1528926896.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T21:54:56.215Z,1528926896.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:56.637Z,1528926896.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T21:54:56.638Z,1528926896.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:57.095Z,1528926897.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T21:54:57.096Z,1528926897.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:57.394Z,1528926897.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T21:54:57.395Z,1528926897.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:57.827Z,1528926897.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:58.255Z,1528926898.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:59.677Z,1528926899.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:54:59.852Z,1528926899.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:00.255Z,1528926900.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:00.656Z,1528926900.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:01.056Z,1528926901.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:01.433Z,1528926901.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:01.834Z,1528926901.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:02.234Z,1528926902.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:02.672Z,1528926902.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:03.063Z,1528926903.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:04.229Z,1528926904.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:04.406Z,1528926904.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:04.809Z,1528926904.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:05.187Z,1528926905.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:05.587Z,1528926905.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:05.979Z,1528926905.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:06.377Z,1528926906.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:06.813Z,1528926906.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:07.211Z,1528926907.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:08.355Z,1528926908.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:08.513Z,1528926908.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:08.910Z,1528926908.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:09.295Z,1528926909.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:09.699Z,1528926909.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:10.090Z,1528926910.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:10.490Z,1528926910.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:10.923Z,1528926910.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:11.328Z,1528926911.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:12.451Z,1528926912.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:12.600Z,1528926912.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:13.004Z,1528926913.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:13.407Z,1528926913.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:13.832Z,1528926913.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:14.201Z,1528926914.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:14.601Z,1528926914.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:15.012Z,1528926915.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:15.410Z,1528926915.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:15.820Z,1528926915.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:16.251Z,1528926916.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:17.384Z,1528926917.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:17.547Z,1528926917.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:17.943Z,1528926917.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:18.352Z,1528926918.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:18.740Z,1528926918.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:19.141Z,1528926919.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:19.553Z,1528926919.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:19.933Z,1528926919.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:20.352Z,1528926920.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:21.516Z,1528926921.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:21.695Z,1528926921.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:22.091Z,1528926922.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:22.474Z,1528926922.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:22.875Z,1528926922.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:23.268Z,1528926923.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:23.669Z,1528926923.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:24.068Z,1528926924.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:24.467Z,1528926924.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:24.898Z,1528926924.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:25.300Z,1528926925.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:26.480Z,1528926926.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:26.647Z,1528926926.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:27.068Z,1528926927.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:27.462Z,1528926927.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:27.863Z,1528926927.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:28.258Z,1528926928.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:28.664Z,1528926928.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:29.054Z,1528926929.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:29.466Z,1528926929.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:29.870Z,1528926929.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:30.271Z,1528926930.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:31.447Z,1528926931.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:31.625Z,1528926931.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:32.022Z,1528926932.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:32.422Z,1528926932.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:32.819Z,1528926932.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:33.220Z,1528926933.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:33.615Z,1528926933.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:34.015Z,1528926934.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:34.418Z,1528926934.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:34.830Z,1528926934.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:35.223Z,1528926935.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:36.387Z,1528926936.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:36.563Z,1528926936.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:36.980Z,1528926936.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:37.380Z,1528926937.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:37.780Z,1528926937.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:38.173Z,1528926938.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:38.586Z,1528926938.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:38.975Z,1528926938.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:39.384Z,1528926939.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:40.527Z,1528926940.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:40.663Z,1528926940.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:41.081Z,1528926941.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:41.482Z,1528926941.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:41.882Z,1528926941.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:42.277Z,1528926942.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:42.680Z,1528926942.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:43.072Z,1528926943.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:43.487Z,1528926943.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:43.893Z,1528926943.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:44.284Z,1528926944.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:45.503Z,1528926945.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:45.683Z,1528926945.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:46.082Z,1528926946.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:46.480Z,1528926946.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:46.871Z,1528926946.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:47.257Z,1528926947.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:47.655Z,1528926947.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:48.052Z,1528926948.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:48.456Z,1528926948.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:48.892Z,1528926948.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:49.282Z,1528926949.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:50.490Z,1528926950.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:50.628Z,1528926950.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:51.050Z,1528926951.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:51.454Z,1528926951.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:51.846Z,1528926951.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:52.242Z,1528926952.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:52.642Z,1528926952.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:53.050Z,1528926953.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:53.440Z,1528926953.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:53.859Z,1528926953.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:54.255Z,1528926954.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:55.470Z,1528926955.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:55.628Z,1528926955.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:56.019Z,1528926956.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:56.420Z,1528926956.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:56.822Z,1528926956.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:57.209Z,1528926957.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:57.654Z,1528926957.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:58.016Z,1528926958.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:58.424Z,1528926958.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:59.598Z,1528926959.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:55:59.756Z,1528926959.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:00.163Z,1528926960.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:00.567Z,1528926960.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:00.947Z,1528926960.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:01.338Z,1528926961.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:01.738Z,1528926961.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:02.140Z,1528926962.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:02.539Z,1528926962.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:02.975Z,1528926962.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:03.349Z,1528926963.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:04.528Z,1528926964.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:04.685Z,1528926964.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:05.085Z,1528926965.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:05.485Z,1528926965.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:05.885Z,1528926965.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:06.282Z,1528926966.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:06.728Z,1528926966.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:07.086Z,1528926967.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:07.529Z,1528926967.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:07.928Z,1528926967.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:08.279Z,1528926968.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:09.639Z,1528926969.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:09.803Z,1528926969.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:10.197Z,1528926970.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:10.616Z,1528926970.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:11.000Z,1528926971.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:11.394Z,1528926971.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:11.795Z,1528926971.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:12.172Z,1528926972.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:12.580Z,1528926972.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:13.024Z,1528926973.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:13.415Z,1528926973.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:14.577Z,1528926974.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:14.699Z,1528926974.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:15.124Z,1528926975.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:15.522Z,1528926975.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:15.915Z,1528926975.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:16.314Z,1528926976.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:16.716Z,1528926976.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:17.105Z,1528926977.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:17.510Z,1528926977.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:17.924Z,1528926977.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:18.317Z,1528926978.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:19.497Z,1528926979.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:19.659Z,1528926979.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:20.057Z,1528926980.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:20.464Z,1528926980.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:20.859Z,1528926980.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:21.249Z,1528926981.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:21.669Z,1528926981.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:22.030Z,1528926982.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:22.456Z,1528926982.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:23.627Z,1528926983.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:23.804Z,1528926983.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:24.200Z,1528926984.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:24.608Z,1528926984.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:25.006Z,1528926985.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:25.380Z,1528926985.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:25.780Z,1528926985.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:26.180Z,1528926986.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:26.586Z,1528926986.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:27.028Z,1528926987.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:27.391Z,1528926987.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:28.628Z,1528926988.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:28.758Z,1528926988.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:29.177Z,1528926989.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:29.578Z,1528926989.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:29.978Z,1528926989.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:30.373Z,1528926990.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:30.776Z,1528926990.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:31.156Z,1528926991.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:31.573Z,1528926991.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:31.990Z,1528926991.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:32.387Z,1528926992.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:33.585Z,1528926993.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:33.726Z,1528926993.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:34.144Z,1528926994.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:34.544Z,1528926994.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:34.947Z,1528926994.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:35.312Z,1528926995.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:35.712Z,1528926995.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:36.111Z,1528926996.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:36.512Z,1528926996.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:36.945Z,1528926996.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:37.339Z,1528926997.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:38.545Z,1528926998.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:38.686Z,1528926998.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:39.102Z,1528926999.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:39.506Z,1528926999.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:39.906Z,1528926999.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:40.298Z,1528927000.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:40.714Z,1528927000.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:41.096Z,1528927001.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:41.514Z,1528927001.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:42.662Z,1528927002.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:42.807Z,1528927002.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:43.209Z,1528927003.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:43.615Z,1528927003.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:44.011Z,1528927004.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:44.404Z,1528927004.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:44.788Z,1528927004.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:45.185Z,1528927005.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:45.590Z,1528927005.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:46.022Z,1528927006.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:46.414Z,1528927006.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:48.972Z,1528927008.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:49.113Z,1528927009.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:49.521Z,1528927009.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:49.921Z,1528927009.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:50.319Z,1528927010.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:50.712Z,1528927010.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:51.115Z,1528927011.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:51.506Z,1528927011.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:51.929Z,1528927011.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:52.322Z,1528927012.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:53.526Z,1528927013.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:53.668Z,1528927013.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:54.076Z,1528927014.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:54.474Z,1528927014.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:54.874Z,1528927014.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:55.268Z,1528927015.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:55.661Z,1528927015.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:56.082Z,1528927016.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:56.480Z,1528927016.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:57.627Z,1528927017.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:57.776Z,1528927017.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:58.173Z,1528927018.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:58.580Z,1528927018.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:58.982Z,1528927018.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:59.357Z,1528927019.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:56:59.760Z,1528927019.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:00.157Z,1528927020.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:00.557Z,1528927020.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:00.984Z,1528927020.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:01.389Z,1528927021.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:02.554Z,1528927022.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:02.691Z,1528927022.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:03.098Z,1528927023.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:03.520Z,1528927023.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:03.920Z,1528927023.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:04.295Z,1528927024.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:04.712Z,1528927024.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:05.099Z,1528927025.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:05.498Z,1528927025.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:05.906Z,1528927025.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:07.046Z,1528927027.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:07.171Z,1528927027.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:07.599Z,1528927027.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:08.008Z,1528927028.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:08.394Z,1528927028.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:08.798Z,1528927028.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:09.176Z,1528927029.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:09.597Z,1528927029.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:10.020Z,1528927030.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:10.407Z,1528927030.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:11.610Z,1528927031.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:11.767Z,1528927031.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:12.165Z,1528927032.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:12.564Z,1528927032.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:12.965Z,1528927032.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:13.356Z,1528927033.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:13.781Z,1528927033.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:14.140Z,1528927034.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:14.570Z,1528927034.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:15.743Z,1528927035.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:15.914Z,1528927035.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:16.331Z,1528927036.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:16.730Z,1528927036.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:17.131Z,1528927037.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:17.527Z,1528927037.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:17.928Z,1528927037.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:18.329Z,1528927038.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:18.739Z,1528927038.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:19.131Z,1528927039.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:20.275Z,1528927040.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:20.428Z,1528927040.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:20.830Z,1528927040.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:21.242Z,1528927041.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:21.749Z,1528927041.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:22.075Z,1528927042.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:22.572Z,1528927042.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:22.906Z,1528927042.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:23.209Z,1528927043.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:23.644Z,1528927043.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:24.817Z,1528927044.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:24.975Z,1528927044.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:25.375Z,1528927045.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:25.772Z,1528927045.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:26.173Z,1528927046.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:26.570Z,1528927046.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:26.971Z,1528927046.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:27.371Z,1528927047.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:27.788Z,1528927047.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:28.177Z,1528927048.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:29.335Z,1528927049.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:29.512Z,1528927049.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:29.921Z,1528927049.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:30.297Z,1528927050.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:30.695Z,1528927050.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:31.087Z,1528927051.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:31.488Z,1528927051.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:31.924Z,1528927051.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:32.294Z,1528927052.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:33.491Z,1528927053.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:33.639Z,1528927053.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:34.037Z,1528927054.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:34.442Z,1528927054.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:34.837Z,1528927054.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:35.240Z,1528927055.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:35.630Z,1528927055.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:36.048Z,1528927056.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:36.452Z,1528927056.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:37.599Z,1528927057.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:37.771Z,1528927057.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:38.148Z,1528927058.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:38.552Z,1528927058.552 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:38.552Z,1528927058.552 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 369
2018-06-13T21:57:38.552Z,1528927058.552 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T21:57:38.570Z,1528927058.570 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:38.570Z,1528927058.570 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 369
2018-06-13T21:57:38.570Z,1528927058.570 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T21:57:38.572Z,1528927058.572 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:38.572Z,1528927058.572 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 369
2018-06-13T21:57:38.572Z,1528927058.572 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T21:57:38.649Z,1528927058.649 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T21:57:38.649Z,1528927058.649 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T21:57:38.650Z,1528927058.650 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T21:57:39.053Z,1528927059.053 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T21:57:39.053Z,1528927059.053 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 369
2018-06-13T21:57:39.054Z,1528927059.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T21:57:39.054Z,1528927059.054 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 369
2018-06-13T21:57:39.054Z,1528927059.054 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T21:57:39.054Z,1528927059.054 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 369
2018-06-13T21:57:39.342Z,1528927059.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T21:57:39.342Z,1528927059.342 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:57:39.343Z,1528927059.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:57:39.343Z,1528927059.343 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T21:57:39.343Z,1528927059.343 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:57:39.344Z,1528927059.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:57:39.344Z,1528927059.344 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T21:57:39.344Z,1528927059.344 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T21:57:39.345Z,1528927059.345 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T21:57:39.771Z,1528927059.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T21:57:39.772Z,1528927059.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:40.143Z,1528927060.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T21:57:40.143Z,1528927060.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:40.547Z,1528927060.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T21:57:40.548Z,1528927060.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:40.953Z,1528927060.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T21:57:40.954Z,1528927060.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:42.133Z,1528927062.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2018-06-13T21:57:42.134Z,1528927062.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:42.292Z,1528927062.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T21:57:42.293Z,1528927062.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:42.689Z,1528927062.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T21:57:42.690Z,1528927062.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:43.089Z,1528927063.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T21:57:43.090Z,1528927063.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:43.494Z,1528927063.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T21:57:43.495Z,1528927063.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:43.884Z,1528927063.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T21:57:43.884Z,1528927063.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:44.288Z,1528927064.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T21:57:44.297Z,1528927064.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:44.694Z,1528927064.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T21:57:44.695Z,1528927064.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:45.100Z,1528927065.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T21:57:45.101Z,1528927065.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:45.500Z,1528927065.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T21:57:45.505Z,1528927065.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:46.662Z,1528927066.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T21:57:46.663Z,1528927066.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:46.810Z,1528927066.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T21:57:46.811Z,1528927066.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:47.205Z,1528927067.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T21:57:47.206Z,1528927067.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:47.606Z,1528927067.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T21:57:47.607Z,1528927067.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:48.004Z,1528927068.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T21:57:48.006Z,1528927068.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:48.406Z,1528927068.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T21:57:48.407Z,1528927068.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:48.817Z,1528927068.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T21:57:48.818Z,1528927068.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:49.201Z,1528927069.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T21:57:49.202Z,1528927069.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:49.606Z,1528927069.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T21:57:49.607Z,1528927069.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:50.812Z,1528927070.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T21:57:50.813Z,1528927070.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:50.949Z,1528927070.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T21:57:50.950Z,1528927070.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:51.306Z,1528927071.306 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T21:57:51.306Z,1528927071.306 [NAL9602] Data Fault, FailCount= 1
2018-06-13T21:57:51.306Z,1528927071.306 [NAL9602](ERROR): Data Fault
2018-06-13T21:57:51.361Z,1528927071.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T21:57:51.362Z,1528927071.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:51.441Z,1528927071.441 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T21:57:51.703Z,1528927071.703 [NAL9602](INFO): Powering down
2018-06-13T21:57:51.759Z,1528927071.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T21:57:51.760Z,1528927071.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:52.148Z,1528927072.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T21:57:52.149Z,1528927072.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:52.548Z,1528927072.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T21:57:52.550Z,1528927072.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:52.637Z,1528927072.637 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T21:57:52.637Z,1528927072.637 [NAL9602] No Fault, FailCount= 1
2018-06-13T21:57:52.940Z,1528927072.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T21:57:52.942Z,1528927072.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:53.349Z,1528927073.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T21:57:53.350Z,1528927073.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:53.736Z,1528927073.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T21:57:53.761Z,1528927073.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:54.132Z,1528927074.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T21:57:54.133Z,1528927074.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:54.540Z,1528927074.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T21:57:54.557Z,1528927074.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:54.940Z,1528927074.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T21:57:54.941Z,1528927074.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:55.336Z,1528927075.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T21:57:55.336Z,1528927075.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:55.739Z,1528927075.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2018-06-13T21:57:55.740Z,1528927075.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:56.139Z,1528927076.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2018-06-13T21:57:56.140Z,1528927076.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:56.538Z,1528927076.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T21:57:56.539Z,1528927076.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:56.939Z,1528927076.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2018-06-13T21:57:56.940Z,1528927076.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:57.337Z,1528927077.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2018-06-13T21:57:57.338Z,1528927077.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:57.735Z,1528927077.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2018-06-13T21:57:57.735Z,1528927077.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:58.139Z,1528927078.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2018-06-13T21:57:58.140Z,1528927078.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:58.538Z,1528927078.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2018-06-13T21:57:58.539Z,1528927078.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:58.935Z,1528927078.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:59.339Z,1528927079.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:57:59.738Z,1528927079.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:00.135Z,1528927080.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:00.539Z,1528927080.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:00.939Z,1528927080.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:01.335Z,1528927081.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:01.824Z,1528927081.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:02.167Z,1528927082.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:02.569Z,1528927082.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:02.992Z,1528927082.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:03.358Z,1528927083.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:03.744Z,1528927083.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:04.160Z,1528927084.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:04.536Z,1528927084.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:04.937Z,1528927084.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:05.340Z,1528927085.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:05.736Z,1528927085.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:06.140Z,1528927086.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:06.544Z,1528927086.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:06.939Z,1528927086.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:07.339Z,1528927087.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:07.739Z,1528927087.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:08.138Z,1528927088.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:08.539Z,1528927088.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:08.939Z,1528927088.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:09.339Z,1528927089.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:09.740Z,1528927089.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:10.139Z,1528927090.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:10.539Z,1528927090.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:10.939Z,1528927090.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:11.339Z,1528927091.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:11.739Z,1528927091.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:12.140Z,1528927092.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:12.544Z,1528927092.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:12.939Z,1528927092.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:13.340Z,1528927093.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:13.740Z,1528927093.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:14.139Z,1528927094.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:14.540Z,1528927094.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:14.944Z,1528927094.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:15.339Z,1528927095.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:15.740Z,1528927095.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:16.144Z,1528927096.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:16.540Z,1528927096.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:16.942Z,1528927096.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:17.342Z,1528927097.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:17.743Z,1528927097.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:18.142Z,1528927098.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:18.543Z,1528927098.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:18.942Z,1528927098.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:19.343Z,1528927099.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:19.740Z,1528927099.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:20.141Z,1528927100.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:20.542Z,1528927100.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:20.943Z,1528927100.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:21.342Z,1528927101.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:21.742Z,1528927101.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:22.109Z,1528927102.109 [NAL9602](INFO): Powering up NAL9602
2018-06-13T21:58:22.148Z,1528927102.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:22.541Z,1528927102.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:22.942Z,1528927102.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:23.342Z,1528927103.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:23.742Z,1528927103.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:24.143Z,1528927104.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:24.540Z,1528927104.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:24.941Z,1528927104.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:25.343Z,1528927105.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:25.741Z,1528927105.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:26.140Z,1528927106.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:26.542Z,1528927106.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:26.941Z,1528927106.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:27.342Z,1528927107.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:27.742Z,1528927107.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:28.142Z,1528927108.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:28.542Z,1528927108.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:28.942Z,1528927108.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:29.341Z,1528927109.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:29.742Z,1528927109.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:30.140Z,1528927110.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:30.552Z,1528927110.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:30.942Z,1528927110.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:31.342Z,1528927111.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:31.748Z,1528927111.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:32.143Z,1528927112.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:32.542Z,1528927112.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:32.951Z,1528927112.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:33.302Z,1528927113.302 [NAL9602](INFO): NAL9602 initialized
2018-06-13T21:58:33.346Z,1528927113.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:33.743Z,1528927113.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:34.151Z,1528927114.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:34.573Z,1528927114.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:34.948Z,1528927114.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:35.343Z,1528927115.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:35.743Z,1528927115.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:36.144Z,1528927116.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:36.574Z,1528927116.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:36.952Z,1528927116.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:38.128Z,1528927118.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:38.291Z,1528927118.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:38.686Z,1528927118.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:39.086Z,1528927119.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:39.490Z,1528927119.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:39.891Z,1528927119.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:40.280Z,1528927120.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:40.701Z,1528927120.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:41.084Z,1528927121.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:41.490Z,1528927121.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:43.803Z,1528927123.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:43.983Z,1528927123.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:44.378Z,1528927124.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:44.781Z,1528927124.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:45.178Z,1528927125.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:45.553Z,1528927125.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:45.956Z,1528927125.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:46.423Z,1528927126.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:46.785Z,1528927126.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:47.184Z,1528927127.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:48.343Z,1528927128.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:48.490Z,1528927128.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:48.896Z,1528927128.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:49.296Z,1528927129.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:49.698Z,1528927129.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:50.073Z,1528927130.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:50.469Z,1528927130.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:50.873Z,1528927130.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:51.273Z,1528927131.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:51.704Z,1528927131.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:52.104Z,1528927132.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:53.260Z,1528927133.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:53.394Z,1528927133.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:53.802Z,1528927133.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:54.203Z,1528927134.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:54.605Z,1528927134.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:55.002Z,1528927135.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:55.398Z,1528927135.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:55.810Z,1528927135.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:56.198Z,1528927136.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:56.602Z,1528927136.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:57.759Z,1528927137.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:57.894Z,1528927137.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:58.304Z,1528927138.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:58.702Z,1528927138.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:59.099Z,1528927139.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:59.500Z,1528927139.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:58:59.904Z,1528927139.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:00.302Z,1528927140.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:00.713Z,1528927140.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:01.108Z,1528927141.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:02.354Z,1528927142.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:02.509Z,1528927142.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:02.918Z,1528927142.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:03.324Z,1528927143.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:03.718Z,1528927143.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:04.109Z,1528927144.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:04.506Z,1528927144.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:04.906Z,1528927144.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:05.309Z,1528927145.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:05.728Z,1528927145.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:06.121Z,1528927146.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:07.304Z,1528927147.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:07.461Z,1528927147.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:07.860Z,1528927147.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:08.258Z,1528927148.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:08.658Z,1528927148.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:09.050Z,1528927149.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:09.468Z,1528927149.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:09.854Z,1528927149.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:10.264Z,1528927150.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:11.419Z,1528927151.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:11.564Z,1528927151.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:11.968Z,1528927151.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:12.361Z,1528927152.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:12.760Z,1528927152.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:13.158Z,1528927153.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:13.560Z,1528927153.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:13.957Z,1528927153.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:14.364Z,1528927154.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:14.773Z,1528927154.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:15.164Z,1528927155.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:16.357Z,1528927156.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:16.522Z,1528927156.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:16.920Z,1528927156.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:17.316Z,1528927157.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:17.714Z,1528927157.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:18.128Z,1528927158.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:18.528Z,1528927158.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:18.906Z,1528927158.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:19.304Z,1528927159.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:19.726Z,1528927159.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:20.119Z,1528927160.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:21.279Z,1528927161.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:21.433Z,1528927161.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:21.861Z,1528927161.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:22.266Z,1528927162.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:22.661Z,1528927162.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:23.063Z,1528927163.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:23.470Z,1528927163.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:23.837Z,1528927163.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:24.241Z,1528927164.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:24.662Z,1528927164.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:25.863Z,1528927165.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:26.019Z,1528927166.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:26.419Z,1528927166.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:26.816Z,1528927166.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:27.218Z,1528927167.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:27.592Z,1528927167.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:27.988Z,1528927167.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:28.393Z,1528927168.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:28.824Z,1528927168.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:29.218Z,1528927169.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:30.420Z,1528927170.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:30.566Z,1528927170.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:30.985Z,1528927170.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:31.380Z,1528927171.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:31.779Z,1528927171.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:32.182Z,1528927172.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:32.577Z,1528927172.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:32.974Z,1528927172.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:33.383Z,1528927173.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:33.794Z,1528927173.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:34.185Z,1528927174.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:35.386Z,1528927175.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:35.542Z,1528927175.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:35.947Z,1528927175.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:36.348Z,1528927176.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:36.749Z,1528927176.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:37.138Z,1528927177.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:37.536Z,1528927177.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:37.935Z,1528927177.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:38.339Z,1528927178.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:38.752Z,1528927178.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:39.148Z,1528927179.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:40.380Z,1528927180.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:40.549Z,1528927180.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:40.941Z,1528927180.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:41.341Z,1528927181.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:41.740Z,1528927181.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:42.141Z,1528927182.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:42.549Z,1528927182.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:42.934Z,1528927182.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:43.342Z,1528927183.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:44.506Z,1528927184.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:44.656Z,1528927184.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:45.088Z,1528927185.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:45.487Z,1528927185.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:45.889Z,1528927185.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:46.281Z,1528927186.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:46.665Z,1528927186.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:47.089Z,1528927187.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:47.468Z,1528927187.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:47.896Z,1528927187.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:48.295Z,1528927188.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:49.454Z,1528927189.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:49.603Z,1528927189.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:50.012Z,1528927190.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:50.426Z,1528927190.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:50.808Z,1528927190.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:51.224Z,1528927191.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:51.678Z,1528927191.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:52.020Z,1528927192.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:52.431Z,1528927192.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:52.814Z,1528927192.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:53.254Z,1528927193.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:54.554Z,1528927194.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:54.696Z,1528927194.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:55.097Z,1528927195.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:55.538Z,1528927195.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:55.897Z,1528927195.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:56.284Z,1528927196.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:56.691Z,1528927196.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:57.085Z,1528927197.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:57.486Z,1528927197.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:57.910Z,1528927197.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:58.291Z,1528927198.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:59.480Z,1528927199.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T21:59:59.623Z,1528927199.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:00.026Z,1528927200.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:00.424Z,1528927200.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:00.821Z,1528927200.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:01.215Z,1528927201.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:01.614Z,1528927201.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:02.021Z,1528927202.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:02.417Z,1528927202.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:02.846Z,1528927202.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:03.224Z,1528927203.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:04.419Z,1528927204.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:04.583Z,1528927204.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:04.986Z,1528927204.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:05.388Z,1528927205.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:05.790Z,1528927205.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:06.192Z,1528927206.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:06.592Z,1528927206.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:06.987Z,1528927206.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:07.392Z,1528927207.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:08.543Z,1528927208.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:08.674Z,1528927208.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:09.093Z,1528927209.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:09.497Z,1528927209.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:09.894Z,1528927209.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:10.288Z,1528927210.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:10.695Z,1528927210.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:11.092Z,1528927211.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:11.493Z,1528927211.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:11.905Z,1528927211.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:12.303Z,1528927212.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:13.475Z,1528927213.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:13.659Z,1528927213.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:14.054Z,1528927214.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:14.460Z,1528927214.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:14.855Z,1528927214.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:15.262Z,1528927215.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:15.650Z,1528927215.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:16.041Z,1528927216.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:16.454Z,1528927216.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:16.870Z,1528927216.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:17.259Z,1528927217.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:18.431Z,1528927218.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:18.590Z,1528927218.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:19.012Z,1528927219.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:19.416Z,1528927219.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:19.807Z,1528927219.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:20.207Z,1528927220.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:20.613Z,1528927220.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:21.004Z,1528927221.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:21.407Z,1528927221.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:21.818Z,1528927221.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:22.224Z,1528927222.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:23.391Z,1528927223.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:23.571Z,1528927223.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:23.967Z,1528927223.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:24.370Z,1528927224.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:24.768Z,1528927224.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:25.165Z,1528927225.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:25.580Z,1528927225.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:25.942Z,1528927225.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:26.371Z,1528927226.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:27.573Z,1528927227.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:27.732Z,1528927227.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:28.130Z,1528927228.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:28.533Z,1528927228.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:28.932Z,1528927228.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:29.320Z,1528927229.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:29.732Z,1528927229.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:30.108Z,1528927230.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:30.529Z,1528927230.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:30.943Z,1528927230.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:31.342Z,1528927231.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:32.549Z,1528927232.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:32.687Z,1528927232.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:33.095Z,1528927233.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:33.499Z,1528927233.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:33.904Z,1528927233.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:34.294Z,1528927234.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:34.695Z,1528927234.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:35.096Z,1528927235.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:35.476Z,1528927235.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:35.906Z,1528927235.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:36.298Z,1528927236.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:37.514Z,1528927237.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:37.651Z,1528927237.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:38.062Z,1528927238.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:38.458Z,1528927238.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:38.855Z,1528927238.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:39.254Z,1528927239.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:39.655Z,1528927239.655 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:39.655Z,1528927239.655 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 370
2018-06-13T22:00:39.655Z,1528927239.655 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T22:00:39.657Z,1528927239.657 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:39.658Z,1528927239.658 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 370
2018-06-13T22:00:39.658Z,1528927239.658 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T22:00:39.659Z,1528927239.659 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:39.659Z,1528927239.659 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 370
2018-06-13T22:00:39.659Z,1528927239.659 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T22:00:39.737Z,1528927239.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T22:00:39.737Z,1528927239.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T22:00:39.738Z,1528927239.738 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T22:00:40.129Z,1528927240.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T22:00:40.129Z,1528927240.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 370
2018-06-13T22:00:40.130Z,1528927240.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T22:00:40.130Z,1528927240.130 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 370
2018-06-13T22:00:40.130Z,1528927240.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T22:00:40.130Z,1528927240.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 370
2018-06-13T22:00:40.467Z,1528927240.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T22:00:40.467Z,1528927240.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:00:40.468Z,1528927240.468 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:00:40.468Z,1528927240.468 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T22:00:40.473Z,1528927240.473 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:00:40.474Z,1528927240.474 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:00:40.474Z,1528927240.474 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T22:00:40.475Z,1528927240.475 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:00:40.475Z,1528927240.475 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:00:40.875Z,1528927240.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T22:00:40.875Z,1528927240.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:41.246Z,1528927241.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T22:00:41.247Z,1528927241.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:42.495Z,1528927242.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T22:00:42.496Z,1528927242.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:42.650Z,1528927242.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T22:00:42.651Z,1528927242.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:43.092Z,1528927243.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T22:00:43.093Z,1528927243.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:43.482Z,1528927243.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T22:00:43.483Z,1528927243.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:43.882Z,1528927243.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T22:00:43.883Z,1528927243.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:44.260Z,1528927244.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T22:00:44.261Z,1528927244.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:44.663Z,1528927244.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T22:00:44.664Z,1528927244.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:45.061Z,1528927245.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T22:00:45.062Z,1528927245.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:45.468Z,1528927245.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T22:00:45.469Z,1528927245.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:45.895Z,1528927245.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T22:00:45.896Z,1528927245.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:46.270Z,1528927246.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T22:00:46.271Z,1528927246.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:47.505Z,1528927247.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T22:00:47.506Z,1528927247.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:47.655Z,1528927247.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2018-06-13T22:00:47.656Z,1528927247.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:48.049Z,1528927248.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2018-06-13T22:00:48.050Z,1528927248.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:48.452Z,1528927248.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2018-06-13T22:00:48.453Z,1528927248.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:48.851Z,1528927248.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T22:00:48.852Z,1528927248.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:49.244Z,1528927249.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T22:00:49.245Z,1528927249.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:49.651Z,1528927249.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T22:00:49.652Z,1528927249.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:50.036Z,1528927250.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T22:00:50.042Z,1528927250.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:50.449Z,1528927250.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T22:00:50.450Z,1528927250.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:50.859Z,1528927250.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T22:00:50.860Z,1528927250.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:51.256Z,1528927251.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T22:00:51.257Z,1528927251.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:52.470Z,1528927252.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T22:00:52.471Z,1528927252.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:52.655Z,1528927252.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T22:00:52.656Z,1528927252.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:53.056Z,1528927253.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T22:00:53.058Z,1528927253.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:53.464Z,1528927253.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T22:00:53.465Z,1528927253.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:53.855Z,1528927253.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T22:00:53.856Z,1528927253.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:54.260Z,1528927254.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T22:00:54.261Z,1528927254.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:54.667Z,1528927254.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T22:00:54.668Z,1528927254.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:55.051Z,1528927255.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T22:00:55.052Z,1528927255.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:55.460Z,1528927255.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T22:00:55.461Z,1528927255.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:56.609Z,1528927256.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T22:00:56.610Z,1528927256.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:56.750Z,1528927256.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T22:00:56.751Z,1528927256.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:57.165Z,1528927257.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T22:00:57.166Z,1528927257.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:57.566Z,1528927257.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T22:00:57.567Z,1528927257.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:57.966Z,1528927257.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T22:00:57.967Z,1528927257.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:58.360Z,1528927258.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T22:00:58.365Z,1528927258.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:58.767Z,1528927258.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T22:00:58.768Z,1528927258.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:59.144Z,1528927259.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T22:00:59.157Z,1528927259.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:59.545Z,1528927259.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T22:00:59.546Z,1528927259.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:00:59.976Z,1528927259.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:00.367Z,1528927260.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:01.543Z,1528927261.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:01.692Z,1528927261.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:02.091Z,1528927262.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:02.494Z,1528927262.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:02.893Z,1528927262.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:03.284Z,1528927263.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:03.692Z,1528927263.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:04.082Z,1528927264.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:04.484Z,1528927264.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:04.896Z,1528927264.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:05.294Z,1528927265.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:06.478Z,1528927266.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:06.640Z,1528927266.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:07.035Z,1528927267.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:07.438Z,1528927267.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:07.834Z,1528927267.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:08.232Z,1528927268.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:08.641Z,1528927268.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:09.034Z,1528927269.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:09.438Z,1528927269.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:10.684Z,1528927270.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:10.808Z,1528927270.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:11.240Z,1528927271.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:11.639Z,1528927271.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:12.040Z,1528927272.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:12.429Z,1528927272.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:12.818Z,1528927272.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:13.216Z,1528927273.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:13.644Z,1528927273.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:14.047Z,1528927274.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:15.258Z,1528927275.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:15.416Z,1528927275.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:15.802Z,1528927275.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:16.207Z,1528927276.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:16.612Z,1528927276.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:16.998Z,1528927276.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:17.393Z,1528927277.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:17.813Z,1528927277.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:18.206Z,1528927278.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:19.372Z,1528927279.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:19.520Z,1528927279.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:19.952Z,1528927279.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:20.345Z,1528927280.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:20.744Z,1528927280.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:21.116Z,1528927281.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:21.519Z,1528927281.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:21.946Z,1528927281.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:22.346Z,1528927282.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:23.499Z,1528927283.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:23.649Z,1528927283.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:24.051Z,1528927284.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:24.448Z,1528927284.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:24.850Z,1528927284.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:25.249Z,1528927285.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:25.654Z,1528927285.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:26.027Z,1528927286.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:26.425Z,1528927286.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:26.851Z,1528927286.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:28.020Z,1528927288.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:28.163Z,1528927288.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:28.561Z,1528927288.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:28.964Z,1528927288.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:29.362Z,1528927289.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:29.754Z,1528927289.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:30.154Z,1528927290.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:30.558Z,1528927290.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:30.980Z,1528927290.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:31.364Z,1528927291.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:32.523Z,1528927292.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:32.664Z,1528927292.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:33.066Z,1528927293.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:33.466Z,1528927293.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:33.868Z,1528927293.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:34.265Z,1528927294.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:34.679Z,1528927294.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:35.044Z,1528927295.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:35.444Z,1528927295.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:35.875Z,1528927295.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:37.087Z,1528927297.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:37.208Z,1528927297.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:37.638Z,1528927297.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:38.039Z,1528927298.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:38.444Z,1528927298.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:38.812Z,1528927298.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:39.233Z,1528927299.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:39.613Z,1528927299.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:40.053Z,1528927300.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:40.445Z,1528927300.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:41.605Z,1528927301.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:41.760Z,1528927301.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:42.153Z,1528927302.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:42.547Z,1528927302.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:42.967Z,1528927302.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:43.338Z,1528927303.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:43.744Z,1528927303.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:44.140Z,1528927304.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:44.538Z,1528927304.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:44.970Z,1528927304.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:45.374Z,1528927305.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:46.517Z,1528927306.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:46.671Z,1528927306.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:47.074Z,1528927307.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:47.472Z,1528927307.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:47.871Z,1528927307.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:48.248Z,1528927308.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:48.646Z,1528927308.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:49.078Z,1528927309.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:49.448Z,1528927309.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:49.875Z,1528927309.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:51.030Z,1528927311.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:51.185Z,1528927311.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:51.592Z,1528927311.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:51.995Z,1528927311.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:52.386Z,1528927312.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:52.785Z,1528927312.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:53.160Z,1528927313.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:53.585Z,1528927313.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:54.004Z,1528927314.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:54.391Z,1528927314.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:55.603Z,1528927315.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:55.743Z,1528927315.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:56.145Z,1528927316.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:56.550Z,1528927316.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:56.946Z,1528927316.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:57.338Z,1528927317.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:57.758Z,1528927317.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:58.141Z,1528927318.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:58.556Z,1528927318.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:59.711Z,1528927319.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:01:59.887Z,1528927319.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:00.288Z,1528927320.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:00.676Z,1528927320.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:01.075Z,1528927321.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:01.473Z,1528927321.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:01.868Z,1528927321.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:02.269Z,1528927322.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:02.671Z,1528927322.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:03.104Z,1528927323.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:03.478Z,1528927323.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:04.666Z,1528927324.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:04.807Z,1528927324.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:05.217Z,1528927325.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:05.618Z,1528927325.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:06.018Z,1528927326.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:06.413Z,1528927326.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:06.820Z,1528927326.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:07.208Z,1528927327.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:07.623Z,1528927327.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:08.032Z,1528927328.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:08.418Z,1528927328.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:09.585Z,1528927329.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:09.731Z,1528927329.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:10.134Z,1528927330.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:10.533Z,1528927330.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:10.929Z,1528927330.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:11.321Z,1528927331.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:11.744Z,1528927331.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:12.123Z,1528927332.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:12.520Z,1528927332.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:12.933Z,1528927332.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:14.133Z,1528927334.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:14.279Z,1528927334.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:14.683Z,1528927334.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:15.082Z,1528927335.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:15.478Z,1528927335.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:15.875Z,1528927335.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:16.279Z,1528927336.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:16.674Z,1528927336.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:17.090Z,1528927337.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:17.482Z,1528927337.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:18.721Z,1528927338.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:18.873Z,1528927338.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:19.280Z,1528927339.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:19.679Z,1528927339.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:20.088Z,1528927340.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:20.476Z,1528927340.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:20.884Z,1528927340.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:21.261Z,1528927341.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:21.661Z,1528927341.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:22.092Z,1528927342.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:22.486Z,1528927342.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:23.695Z,1528927343.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:23.840Z,1528927343.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:24.248Z,1528927344.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:24.640Z,1528927344.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:25.040Z,1528927345.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:25.438Z,1528927345.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:25.839Z,1528927345.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:26.234Z,1528927346.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:26.638Z,1528927346.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:27.049Z,1528927347.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:27.445Z,1528927347.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:28.653Z,1528927348.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:28.795Z,1528927348.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:29.204Z,1528927349.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:29.600Z,1528927349.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:30.000Z,1528927350.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:30.400Z,1528927350.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:30.812Z,1528927350.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:31.203Z,1528927351.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:31.602Z,1528927351.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:32.763Z,1528927352.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:32.914Z,1528927352.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:33.323Z,1528927353.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:33.749Z,1528927353.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:34.144Z,1528927354.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:34.519Z,1528927354.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:34.918Z,1528927354.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:35.318Z,1528927355.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:35.719Z,1528927355.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:36.148Z,1528927356.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:36.527Z,1528927356.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:37.700Z,1528927357.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:37.856Z,1528927357.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:38.268Z,1528927358.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:38.663Z,1528927358.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:39.059Z,1528927359.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:39.455Z,1528927359.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:39.852Z,1528927359.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:40.250Z,1528927360.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:40.650Z,1528927360.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:41.069Z,1528927361.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:41.459Z,1528927361.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:42.649Z,1528927362.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:42.813Z,1528927362.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:43.211Z,1528927363.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:43.615Z,1528927363.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:44.010Z,1528927364.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:44.407Z,1528927364.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:44.816Z,1528927364.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:45.189Z,1528927365.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:45.620Z,1528927365.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:46.783Z,1528927366.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:46.935Z,1528927366.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:47.362Z,1528927367.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:47.760Z,1528927367.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:48.160Z,1528927368.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:48.562Z,1528927368.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:48.940Z,1528927368.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:49.341Z,1528927369.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:49.761Z,1528927369.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:50.174Z,1528927370.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:50.563Z,1528927370.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:51.771Z,1528927371.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:51.931Z,1528927371.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:52.326Z,1528927372.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:52.730Z,1528927372.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:53.130Z,1528927373.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:53.529Z,1528927373.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:53.931Z,1528927373.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:54.305Z,1528927374.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:54.722Z,1528927374.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:55.139Z,1528927375.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:55.538Z,1528927375.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:56.700Z,1528927376.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:56.852Z,1528927376.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:57.247Z,1528927377.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.395585 seconds old.
2018-06-13T22:02:57.248Z,1528927377.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:57.249Z,1528927377.249 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.395968 seconds old.
2018-06-13T22:02:57.250Z,1528927377.250 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.396337 seconds old.
2018-06-13T22:02:57.654Z,1528927377.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.802191 seconds old.
2018-06-13T22:02:57.655Z,1528927377.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:57.655Z,1528927377.655 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.802352 seconds old.
2018-06-13T22:02:57.656Z,1528927377.656 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.802695 seconds old.
2018-06-13T22:02:58.048Z,1528927378.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.197023 seconds old.
2018-06-13T22:02:58.050Z,1528927378.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:58.050Z,1528927378.050 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.197419 seconds old.
2018-06-13T22:02:58.052Z,1528927378.052 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.197748 seconds old.
2018-06-13T22:02:58.436Z,1528927378.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.584723 seconds old.
2018-06-13T22:02:58.437Z,1528927378.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:58.438Z,1528927378.438 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.585123 seconds old.
2018-06-13T22:02:58.439Z,1528927378.439 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.585457 seconds old.
2018-06-13T22:02:58.847Z,1528927378.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.995343 seconds old.
2018-06-13T22:02:58.848Z,1528927378.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:58.849Z,1528927378.849 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.995499 seconds old.
2018-06-13T22:02:58.850Z,1528927378.850 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.996068 seconds old.
2018-06-13T22:02:59.244Z,1528927379.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.392426 seconds old.
2018-06-13T22:02:59.245Z,1528927379.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:02:59.246Z,1528927379.246 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.392886 seconds old.
2018-06-13T22:02:59.247Z,1528927379.247 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.393221 seconds old.
2018-06-13T22:02:59.643Z,1528927379.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:00.064Z,1528927380.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:00.448Z,1528927380.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:01.642Z,1528927381.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:01.804Z,1528927381.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:02.205Z,1528927382.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:02.605Z,1528927382.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:03.005Z,1528927383.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:03.394Z,1528927383.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:03.809Z,1528927383.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:04.191Z,1528927384.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:04.606Z,1528927384.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:05.801Z,1528927385.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:05.947Z,1528927385.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:06.345Z,1528927386.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:06.749Z,1528927386.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:07.145Z,1528927387.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:07.536Z,1528927387.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:07.938Z,1528927387.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:08.346Z,1528927388.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:08.740Z,1528927388.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:09.153Z,1528927389.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:09.549Z,1528927389.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:10.767Z,1528927390.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:10.950Z,1528927390.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:11.347Z,1528927391.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:11.750Z,1528927391.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:12.152Z,1528927392.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:12.540Z,1528927392.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:12.952Z,1528927392.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:13.349Z,1528927393.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:13.733Z,1528927393.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:14.164Z,1528927394.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:14.561Z,1528927394.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:15.776Z,1528927395.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:15.936Z,1528927395.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:16.326Z,1528927396.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:16.725Z,1528927396.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:17.126Z,1528927397.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:17.512Z,1528927397.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:17.914Z,1528927397.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:18.314Z,1528927398.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:18.724Z,1528927398.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:19.131Z,1528927399.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:19.526Z,1528927399.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:20.759Z,1528927400.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:20.891Z,1528927400.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:21.315Z,1528927401.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:21.724Z,1528927401.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:22.116Z,1528927402.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:22.496Z,1528927402.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:22.896Z,1528927402.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:23.296Z,1528927403.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:23.717Z,1528927403.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:24.132Z,1528927404.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:24.523Z,1528927404.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:25.743Z,1528927405.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:25.921Z,1528927405.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:26.327Z,1528927406.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:26.740Z,1528927406.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:27.124Z,1528927407.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:27.501Z,1528927407.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:27.929Z,1528927407.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:28.300Z,1528927408.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:28.701Z,1528927408.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:29.131Z,1528927409.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:29.527Z,1528927409.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:31.182Z,1528927411.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:31.312Z,1528927411.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:31.738Z,1528927411.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:32.141Z,1528927412.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:32.548Z,1528927412.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:32.935Z,1528927412.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:33.337Z,1528927413.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:33.721Z,1528927413.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:34.149Z,1528927414.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:34.546Z,1528927414.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:35.743Z,1528927415.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:35.900Z,1528927415.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:36.298Z,1528927416.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:36.698Z,1528927416.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:37.097Z,1528927417.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:37.497Z,1528927417.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:37.909Z,1528927417.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:38.294Z,1528927418.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:38.708Z,1528927418.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:39.858Z,1528927419.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:40.016Z,1528927420.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:40.402Z,1528927420.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:40.806Z,1528927420.806 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:40.806Z,1528927420.806 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 371
2018-06-13T22:03:40.807Z,1528927420.807 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T22:03:40.808Z,1528927420.808 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:40.808Z,1528927420.808 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 371
2018-06-13T22:03:40.808Z,1528927420.808 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T22:03:40.810Z,1528927420.810 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:40.810Z,1528927420.810 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 371
2018-06-13T22:03:40.810Z,1528927420.810 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T22:03:40.885Z,1528927420.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T22:03:40.885Z,1528927420.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T22:03:40.886Z,1528927420.886 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T22:03:41.285Z,1528927421.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T22:03:41.285Z,1528927421.285 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 371
2018-06-13T22:03:41.285Z,1528927421.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T22:03:41.286Z,1528927421.286 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 371
2018-06-13T22:03:41.286Z,1528927421.286 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T22:03:41.286Z,1528927421.286 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 371
2018-06-13T22:03:41.604Z,1528927421.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T22:03:41.604Z,1528927421.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:03:41.605Z,1528927421.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:03:41.605Z,1528927421.605 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T22:03:41.605Z,1528927421.605 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:03:41.606Z,1528927421.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:03:41.606Z,1528927421.606 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T22:03:41.607Z,1528927421.607 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:03:41.607Z,1528927421.607 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:03:42.002Z,1528927422.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T22:03:42.003Z,1528927422.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:42.418Z,1528927422.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T22:03:42.419Z,1528927422.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:42.789Z,1528927422.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T22:03:42.790Z,1528927422.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:43.219Z,1528927423.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T22:03:43.220Z,1528927423.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:43.617Z,1528927423.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T22:03:43.618Z,1528927423.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:44.768Z,1528927424.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T22:03:44.769Z,1528927424.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:44.918Z,1528927424.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T22:03:44.919Z,1528927424.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:45.328Z,1528927425.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T22:03:45.329Z,1528927425.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:45.730Z,1528927425.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T22:03:45.731Z,1528927425.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:46.129Z,1528927426.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T22:03:46.130Z,1528927426.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:46.516Z,1528927426.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T22:03:46.518Z,1528927426.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:46.918Z,1528927426.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2018-06-13T22:03:46.919Z,1528927426.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:47.322Z,1528927427.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T22:03:47.322Z,1528927427.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:47.722Z,1528927427.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2018-06-13T22:03:47.723Z,1528927427.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:48.136Z,1528927428.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2018-06-13T22:03:48.137Z,1528927428.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:48.527Z,1528927428.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T22:03:48.528Z,1528927428.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:49.718Z,1528927429.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T22:03:49.719Z,1528927429.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:49.872Z,1528927429.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T22:03:49.873Z,1528927429.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:50.276Z,1528927430.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T22:03:50.277Z,1528927430.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:50.675Z,1528927430.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T22:03:50.676Z,1528927430.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:51.079Z,1528927431.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T22:03:51.080Z,1528927431.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:51.470Z,1528927431.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T22:03:51.471Z,1528927431.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:51.884Z,1528927431.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T22:03:51.885Z,1528927431.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:52.248Z,1528927432.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2018-06-13T22:03:52.265Z,1528927432.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:52.673Z,1528927432.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T22:03:52.674Z,1528927432.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:53.830Z,1528927433.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T22:03:53.831Z,1528927433.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:53.988Z,1528927433.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T22:03:53.988Z,1528927433.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:54.381Z,1528927434.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T22:03:54.382Z,1528927434.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:54.785Z,1528927434.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T22:03:54.786Z,1528927434.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:55.181Z,1528927435.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T22:03:55.182Z,1528927435.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:55.577Z,1528927435.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2018-06-13T22:03:55.578Z,1528927435.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:55.980Z,1528927435.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2018-06-13T22:03:55.982Z,1528927435.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:56.374Z,1528927436.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T22:03:56.375Z,1528927436.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:56.782Z,1528927436.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2018-06-13T22:03:56.783Z,1528927436.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:57.200Z,1528927437.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2018-06-13T22:03:57.213Z,1528927437.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:57.583Z,1528927437.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2018-06-13T22:03:57.584Z,1528927437.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:58.783Z,1528927438.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T22:03:58.784Z,1528927438.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:58.946Z,1528927438.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T22:03:58.947Z,1528927438.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:59.340Z,1528927439.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T22:03:59.340Z,1528927439.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:03:59.742Z,1528927439.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T22:03:59.743Z,1528927439.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:00.156Z,1528927440.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T22:04:00.157Z,1528927440.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:00.540Z,1528927440.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T22:04:00.541Z,1528927440.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:00.954Z,1528927440.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:01.334Z,1528927441.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:01.760Z,1528927441.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:02.915Z,1528927442.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:03.082Z,1528927443.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:03.492Z,1528927443.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:03.900Z,1528927443.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:04.292Z,1528927444.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:04.690Z,1528927444.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:05.092Z,1528927445.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:05.470Z,1528927445.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:05.874Z,1528927445.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:06.312Z,1528927446.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:06.699Z,1528927446.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:07.873Z,1528927447.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:08.028Z,1528927448.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:08.418Z,1528927448.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:08.824Z,1528927448.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:09.232Z,1528927449.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:09.606Z,1528927449.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:10.007Z,1528927450.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:10.407Z,1528927450.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:10.812Z,1528927450.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:11.224Z,1528927451.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:11.619Z,1528927451.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:12.805Z,1528927452.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:12.971Z,1528927452.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:13.366Z,1528927453.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:13.772Z,1528927453.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:14.167Z,1528927454.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:14.563Z,1528927454.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:14.968Z,1528927454.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:15.359Z,1528927455.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:15.758Z,1528927455.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:16.205Z,1528927456.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:16.576Z,1528927456.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:17.759Z,1528927457.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:17.898Z,1528927457.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:18.314Z,1528927458.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:18.729Z,1528927458.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:19.118Z,1528927459.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:19.514Z,1528927459.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:19.925Z,1528927459.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:20.308Z,1528927460.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:20.725Z,1528927460.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:21.917Z,1528927461.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:22.079Z,1528927462.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:22.470Z,1528927462.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:22.877Z,1528927462.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:23.274Z,1528927463.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:23.666Z,1528927463.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:24.068Z,1528927464.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:24.466Z,1528927464.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:24.870Z,1528927464.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:25.282Z,1528927465.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:25.675Z,1528927465.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:26.918Z,1528927466.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:27.047Z,1528927467.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:27.474Z,1528927467.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:27.884Z,1528927467.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:28.274Z,1528927468.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:28.673Z,1528927468.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:29.077Z,1528927469.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:29.452Z,1528927469.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:29.856Z,1528927469.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:30.284Z,1528927470.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:30.674Z,1528927470.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:31.886Z,1528927471.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:32.039Z,1528927472.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:32.437Z,1528927472.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:32.857Z,1528927472.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:33.242Z,1528927473.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:33.643Z,1528927473.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:34.040Z,1528927474.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:34.437Z,1528927474.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:34.841Z,1528927474.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:35.253Z,1528927475.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:35.649Z,1528927475.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:37.850Z,1528927477.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:38.007Z,1528927478.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:38.404Z,1528927478.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:38.805Z,1528927478.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:39.203Z,1528927479.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:39.603Z,1528927479.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:40.004Z,1528927480.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:40.380Z,1528927480.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:40.796Z,1528927480.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:41.219Z,1528927481.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:41.611Z,1528927481.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:42.787Z,1528927482.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:42.959Z,1528927482.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:43.360Z,1528927483.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:43.762Z,1528927483.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:44.151Z,1528927484.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:44.540Z,1528927484.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:44.972Z,1528927484.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:45.335Z,1528927485.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:45.764Z,1528927485.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:46.928Z,1528927486.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:47.054Z,1528927487.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:47.486Z,1528927487.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:47.881Z,1528927487.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:48.275Z,1528927488.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:48.670Z,1528927488.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:49.071Z,1528927489.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:49.464Z,1528927489.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:49.877Z,1528927489.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:50.292Z,1528927490.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:50.683Z,1528927490.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:51.842Z,1528927491.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:51.992Z,1528927491.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:52.391Z,1528927492.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:52.790Z,1528927492.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:53.191Z,1528927493.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:53.578Z,1528927493.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:53.993Z,1528927493.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:54.381Z,1528927494.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:54.766Z,1528927494.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:55.201Z,1528927495.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:56.342Z,1528927496.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:56.500Z,1528927496.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:56.904Z,1528927496.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:57.299Z,1528927497.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:57.695Z,1528927497.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:58.096Z,1528927498.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:58.488Z,1528927498.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:58.894Z,1528927498.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:59.315Z,1528927499.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:04:59.700Z,1528927499.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:00.879Z,1528927500.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:01.058Z,1528927501.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:01.455Z,1528927501.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:01.858Z,1528927501.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:02.254Z,1528927502.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:02.659Z,1528927502.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:03.055Z,1528927503.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:03.448Z,1528927503.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:03.857Z,1528927503.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:04.272Z,1528927504.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:04.667Z,1528927504.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:05.879Z,1528927505.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:06.065Z,1528927506.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:06.458Z,1528927506.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:06.869Z,1528927506.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:07.259Z,1528927507.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:07.661Z,1528927507.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:08.062Z,1528927508.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:08.438Z,1528927508.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:08.837Z,1528927508.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:09.269Z,1528927509.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:09.666Z,1528927509.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:10.876Z,1528927510.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:11.020Z,1528927511.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:11.428Z,1528927511.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:11.874Z,1528927511.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:12.227Z,1528927512.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:12.614Z,1528927512.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:13.035Z,1528927513.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:13.421Z,1528927513.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:13.822Z,1528927513.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:14.981Z,1528927514.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:15.095Z,1528927515.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:15.552Z,1528927515.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:15.925Z,1528927515.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:16.322Z,1528927516.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:16.709Z,1528927516.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:17.112Z,1528927517.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:17.516Z,1528927517.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:17.909Z,1528927517.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:18.328Z,1528927518.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:18.722Z,1528927518.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:19.903Z,1528927519.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:20.063Z,1528927520.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:20.455Z,1528927520.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:20.860Z,1528927520.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:21.267Z,1528927521.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:21.656Z,1528927521.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:22.069Z,1528927522.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:22.452Z,1528927522.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:22.868Z,1528927522.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:24.020Z,1528927524.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:24.166Z,1528927524.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:24.566Z,1528927524.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:24.964Z,1528927524.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:25.362Z,1528927525.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:25.757Z,1528927525.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:26.161Z,1528927526.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:26.562Z,1528927526.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:26.965Z,1528927526.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:27.377Z,1528927527.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:27.768Z,1528927527.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:28.943Z,1528927528.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:29.107Z,1528927529.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:29.523Z,1528927529.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:29.923Z,1528927529.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:30.323Z,1528927530.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:30.718Z,1528927530.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:31.118Z,1528927531.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:31.518Z,1528927531.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:31.921Z,1528927531.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:32.334Z,1528927532.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:32.723Z,1528927532.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:33.949Z,1528927533.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:34.108Z,1528927534.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:34.493Z,1528927534.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:34.898Z,1528927534.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:35.301Z,1528927535.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:35.688Z,1528927535.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:36.092Z,1528927536.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:36.487Z,1528927536.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:36.884Z,1528927536.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:37.304Z,1528927537.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:37.701Z,1528927537.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:38.903Z,1528927538.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:39.083Z,1528927539.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:39.481Z,1528927539.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:39.886Z,1528927539.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:40.287Z,1528927540.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:40.655Z,1528927540.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:41.093Z,1528927541.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:41.457Z,1528927541.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:41.882Z,1528927541.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:43.038Z,1528927543.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:43.166Z,1528927543.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:43.595Z,1528927543.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:43.991Z,1528927543.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:44.387Z,1528927544.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:44.782Z,1528927544.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:45.181Z,1528927545.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:45.579Z,1528927545.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:45.984Z,1528927545.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:46.415Z,1528927546.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:46.843Z,1528927546.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:48.973Z,1528927548.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:49.133Z,1528927549.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:49.530Z,1528927549.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:49.936Z,1528927549.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:50.327Z,1528927550.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:50.742Z,1528927550.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:51.143Z,1528927551.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:51.516Z,1528927551.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:51.915Z,1528927551.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:52.348Z,1528927552.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:52.722Z,1528927552.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:53.909Z,1528927553.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:54.026Z,1528927554.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:54.455Z,1528927554.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:54.864Z,1528927554.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:55.264Z,1528927555.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:55.653Z,1528927555.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:56.046Z,1528927556.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:56.465Z,1528927556.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:56.864Z,1528927556.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:58.101Z,1528927558.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:58.261Z,1528927558.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:58.672Z,1528927558.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:59.073Z,1528927559.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:59.462Z,1528927559.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:05:59.836Z,1528927559.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:00.259Z,1528927560.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:00.642Z,1528927560.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:01.041Z,1528927561.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:01.473Z,1528927561.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:01.871Z,1528927561.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:03.082Z,1528927563.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:03.240Z,1528927563.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:03.641Z,1528927563.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:04.044Z,1528927564.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:04.441Z,1528927564.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:04.831Z,1528927564.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:05.230Z,1528927565.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:05.632Z,1528927565.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:06.031Z,1528927566.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:06.471Z,1528927566.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:06.839Z,1528927566.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:08.068Z,1528927568.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:08.228Z,1528927568.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:08.626Z,1528927568.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:09.025Z,1528927569.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:09.427Z,1528927569.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:09.817Z,1528927569.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:10.228Z,1528927570.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:10.629Z,1528927570.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:11.026Z,1528927571.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:11.433Z,1528927571.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:11.827Z,1528927571.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:13.033Z,1528927573.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:13.179Z,1528927573.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:13.596Z,1528927573.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:13.976Z,1528927573.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:14.375Z,1528927574.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:14.775Z,1528927574.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:15.175Z,1528927575.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:15.573Z,1528927575.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:15.977Z,1528927575.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:16.386Z,1528927576.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:16.782Z,1528927576.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:18.004Z,1528927578.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:18.189Z,1528927578.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:18.583Z,1528927578.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:18.992Z,1528927578.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:19.384Z,1528927579.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:19.784Z,1528927579.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:20.181Z,1528927580.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:20.562Z,1528927580.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:20.965Z,1528927580.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:21.392Z,1528927581.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:21.792Z,1528927581.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:23.094Z,1528927583.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:23.219Z,1528927583.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:23.647Z,1528927583.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:24.050Z,1528927584.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:24.451Z,1528927584.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:24.849Z,1528927584.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:25.228Z,1528927585.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:25.624Z,1528927585.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:26.029Z,1528927586.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:26.464Z,1528927586.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:26.855Z,1528927586.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:28.048Z,1528927588.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:28.215Z,1528927588.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:28.606Z,1528927588.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:29.004Z,1528927589.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:29.405Z,1528927589.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:29.794Z,1528927589.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:30.201Z,1528927590.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:30.592Z,1528927590.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:30.996Z,1528927590.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:31.428Z,1528927591.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:31.803Z,1528927591.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:33.051Z,1528927593.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:33.202Z,1528927593.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:33.600Z,1528927593.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:34.006Z,1528927594.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:34.402Z,1528927594.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:34.794Z,1528927594.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:35.196Z,1528927595.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:35.595Z,1528927595.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:35.999Z,1528927595.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:36.412Z,1528927596.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:36.806Z,1528927596.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:38.040Z,1528927598.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:38.202Z,1528927598.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:38.591Z,1528927598.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:38.999Z,1528927598.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:39.394Z,1528927599.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:39.788Z,1528927599.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:40.194Z,1528927600.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:40.572Z,1528927600.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:40.994Z,1528927600.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:41.406Z,1528927601.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:41.799Z,1528927601.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:41.799Z,1528927601.799 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 372
2018-06-13T22:06:41.799Z,1528927601.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T22:06:41.805Z,1528927601.805 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:41.805Z,1528927601.805 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 372
2018-06-13T22:06:41.805Z,1528927601.805 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T22:06:41.807Z,1528927601.807 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:41.807Z,1528927601.807 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 372
2018-06-13T22:06:41.807Z,1528927601.807 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T22:06:41.893Z,1528927601.893 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T22:06:41.893Z,1528927601.893 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T22:06:41.894Z,1528927601.894 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T22:06:43.105Z,1528927603.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T22:06:43.105Z,1528927603.105 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 372
2018-06-13T22:06:43.106Z,1528927603.106 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T22:06:43.106Z,1528927603.106 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 372
2018-06-13T22:06:43.106Z,1528927603.106 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T22:06:43.106Z,1528927603.106 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 372
2018-06-13T22:06:43.196Z,1528927603.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T22:06:43.197Z,1528927603.197 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:06:43.197Z,1528927603.197 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:06:43.198Z,1528927603.198 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T22:06:43.198Z,1528927603.198 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:06:43.198Z,1528927603.198 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:06:43.199Z,1528927603.199 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T22:06:43.199Z,1528927603.199 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:06:43.199Z,1528927603.199 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:06:43.592Z,1528927603.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.8 s old, using for 20.0 s.
2018-06-13T22:06:43.593Z,1528927603.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:43.976Z,1528927603.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.2 s old, using for 20.0 s.
2018-06-13T22:06:43.978Z,1528927603.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:44.382Z,1528927604.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.6 s old, using for 20.0 s.
2018-06-13T22:06:44.383Z,1528927604.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:44.767Z,1528927604.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T22:06:44.768Z,1528927604.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:45.193Z,1528927605.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T22:06:45.194Z,1528927605.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:45.571Z,1528927605.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.8 s old, using for 20.0 s.
2018-06-13T22:06:45.572Z,1528927605.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:45.978Z,1528927605.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.2 s old, using for 20.0 s.
2018-06-13T22:06:45.979Z,1528927605.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:47.136Z,1528927607.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T22:06:47.137Z,1528927607.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:47.262Z,1528927607.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T22:06:47.263Z,1528927607.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:47.688Z,1528927607.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T22:06:47.689Z,1528927607.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:48.081Z,1528927608.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T22:06:48.082Z,1528927608.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:48.481Z,1528927608.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T22:06:48.482Z,1528927608.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:48.876Z,1528927608.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T22:06:48.876Z,1528927608.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:49.274Z,1528927609.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T22:06:49.274Z,1528927609.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:49.672Z,1528927609.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T22:06:49.677Z,1528927609.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:50.081Z,1528927610.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T22:06:50.082Z,1528927610.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:50.489Z,1528927610.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T22:06:50.490Z,1528927610.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:50.890Z,1528927610.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T22:06:50.891Z,1528927610.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:52.094Z,1528927612.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T22:06:52.095Z,1528927612.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:52.247Z,1528927612.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T22:06:52.248Z,1528927612.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:52.645Z,1528927612.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T22:06:52.646Z,1528927612.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:53.049Z,1528927613.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2018-06-13T22:06:53.050Z,1528927613.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:53.451Z,1528927613.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.7 s old, using for 20.0 s.
2018-06-13T22:06:53.452Z,1528927613.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:53.836Z,1528927613.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T22:06:53.838Z,1528927613.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:54.240Z,1528927614.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T22:06:54.245Z,1528927614.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:54.645Z,1528927614.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T22:06:54.646Z,1528927614.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:55.045Z,1528927615.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T22:06:55.046Z,1528927615.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:55.465Z,1528927615.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T22:06:55.466Z,1528927615.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:55.850Z,1528927615.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T22:06:55.851Z,1528927615.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:57.684Z,1528927617.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2018-06-13T22:06:57.685Z,1528927617.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:57.864Z,1528927617.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T22:06:57.865Z,1528927617.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:58.268Z,1528927618.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T22:06:58.269Z,1528927618.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:58.672Z,1528927618.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T22:06:58.673Z,1528927618.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:59.077Z,1528927619.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T22:06:59.078Z,1528927619.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:59.464Z,1528927619.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T22:06:59.469Z,1528927619.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:06:59.844Z,1528927619.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2018-06-13T22:06:59.871Z,1528927619.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:00.277Z,1528927620.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T22:07:00.278Z,1528927620.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:00.676Z,1528927620.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.9 s old, using for 20.0 s.
2018-06-13T22:07:00.677Z,1528927620.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:01.829Z,1528927621.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:01.975Z,1528927621.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:02.372Z,1528927622.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:02.773Z,1528927622.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:03.174Z,1528927623.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:03.568Z,1528927623.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:03.976Z,1528927623.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:04.381Z,1528927624.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:04.769Z,1528927624.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:05.178Z,1528927625.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:06.339Z,1528927626.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:06.482Z,1528927626.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:06.881Z,1528927626.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:07.281Z,1528927627.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:07.692Z,1528927627.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:08.084Z,1528927628.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:08.485Z,1528927628.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:08.873Z,1528927628.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:09.295Z,1528927629.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:09.686Z,1528927629.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:10.916Z,1528927630.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:11.071Z,1528927631.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:11.479Z,1528927631.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:11.878Z,1528927631.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:12.280Z,1528927632.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:12.652Z,1528927632.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:13.050Z,1528927633.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:13.475Z,1528927633.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:13.877Z,1528927633.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:15.035Z,1528927635.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:15.192Z,1528927635.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:15.590Z,1528927635.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:15.996Z,1528927635.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:16.386Z,1528927636.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:16.778Z,1528927636.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:17.193Z,1528927637.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:17.588Z,1528927637.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:18.754Z,1528927638.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:18.902Z,1528927638.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:19.331Z,1528927639.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:19.740Z,1528927639.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:20.132Z,1528927640.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:20.508Z,1528927640.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:20.929Z,1528927640.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:21.343Z,1528927641.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:21.736Z,1528927641.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:22.894Z,1528927642.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:23.047Z,1528927643.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:23.445Z,1528927643.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:23.845Z,1528927643.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:24.243Z,1528927644.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:24.638Z,1528927644.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:25.044Z,1528927645.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:25.454Z,1528927645.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:25.849Z,1528927645.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:27.052Z,1528927647.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:27.199Z,1528927647.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:27.603Z,1528927647.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:28.004Z,1528927648.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:28.395Z,1528927648.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:28.792Z,1528927648.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:29.193Z,1528927649.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:29.606Z,1528927649.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:29.997Z,1528927649.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:31.158Z,1528927651.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:31.294Z,1528927651.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:31.710Z,1528927651.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:32.113Z,1528927652.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:32.511Z,1528927652.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:32.898Z,1528927652.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:33.297Z,1528927653.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:33.701Z,1528927653.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:34.104Z,1528927654.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:34.539Z,1528927654.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:34.910Z,1528927654.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:36.090Z,1528927656.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:36.250Z,1528927656.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:36.652Z,1528927656.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:37.050Z,1528927657.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:37.455Z,1528927657.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:37.846Z,1528927657.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:38.267Z,1528927658.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:38.622Z,1528927658.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:39.049Z,1528927659.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:40.220Z,1528927660.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:40.399Z,1528927660.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:40.795Z,1528927660.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:41.200Z,1528927661.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:41.598Z,1528927661.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:41.980Z,1528927661.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:42.374Z,1528927662.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:42.775Z,1528927662.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:43.180Z,1528927663.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:43.612Z,1528927663.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:43.999Z,1528927663.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:45.210Z,1528927665.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:45.351Z,1528927665.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:45.767Z,1528927665.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:46.169Z,1528927666.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:46.568Z,1528927666.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:46.963Z,1528927666.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:47.367Z,1528927667.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:47.756Z,1528927667.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:48.161Z,1528927668.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:48.581Z,1528927668.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:48.971Z,1528927668.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:50.173Z,1528927670.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:50.331Z,1528927670.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:50.731Z,1528927670.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:51.131Z,1528927671.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:51.530Z,1528927671.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:51.928Z,1528927671.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:52.328Z,1528927672.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:52.729Z,1528927672.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:53.130Z,1528927673.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:53.545Z,1528927673.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:53.935Z,1528927673.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:55.141Z,1528927675.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:55.288Z,1528927675.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:55.702Z,1528927675.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:56.098Z,1528927676.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:56.498Z,1528927676.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:56.888Z,1528927676.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:57.323Z,1528927677.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:57.682Z,1528927677.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:58.097Z,1528927678.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:59.282Z,1528927679.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:59.407Z,1528927679.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:07:59.840Z,1528927679.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:00.252Z,1528927680.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:00.636Z,1528927680.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:01.021Z,1528927681.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:01.433Z,1528927681.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:01.810Z,1528927681.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:02.240Z,1528927682.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:02.652Z,1528927682.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:03.023Z,1528927683.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:04.213Z,1528927684.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:04.355Z,1528927684.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:04.754Z,1528927684.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:05.158Z,1528927685.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:05.558Z,1528927685.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:05.944Z,1528927685.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:06.346Z,1528927686.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:06.771Z,1528927686.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:07.166Z,1528927687.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:07.607Z,1528927687.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:07.942Z,1528927687.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:09.496Z,1528927689.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:09.643Z,1528927689.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:10.053Z,1528927690.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:10.441Z,1528927690.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:10.840Z,1528927690.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:11.243Z,1528927691.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:11.643Z,1528927691.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:12.038Z,1528927692.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:12.454Z,1528927692.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:12.847Z,1528927692.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:14.143Z,1528927694.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:14.300Z,1528927694.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:14.700Z,1528927694.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:15.098Z,1528927695.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:15.497Z,1528927695.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:15.899Z,1528927695.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:16.305Z,1528927696.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:16.693Z,1528927696.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:17.107Z,1528927697.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:18.270Z,1528927698.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:18.447Z,1528927698.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:18.845Z,1528927698.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:19.243Z,1528927699.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:19.628Z,1528927699.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:20.016Z,1528927700.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:20.416Z,1528927700.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:20.815Z,1528927700.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:21.215Z,1528927701.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:21.643Z,1528927701.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:22.032Z,1528927702.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:23.196Z,1528927703.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:23.359Z,1528927703.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:23.754Z,1528927703.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:24.164Z,1528927704.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:24.562Z,1528927704.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:24.957Z,1528927704.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:25.356Z,1528927705.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:25.747Z,1528927705.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:26.166Z,1528927706.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:26.568Z,1528927706.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:26.967Z,1528927706.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:28.160Z,1528927708.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:28.281Z,1528927708.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:28.720Z,1528927708.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:29.120Z,1528927709.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:29.515Z,1528927709.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:29.901Z,1528927709.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:30.322Z,1528927710.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:30.684Z,1528927710.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:31.121Z,1528927711.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:32.268Z,1528927712.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:32.420Z,1528927712.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:32.828Z,1528927712.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:33.221Z,1528927713.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:33.623Z,1528927713.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:34.019Z,1528927714.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:34.419Z,1528927714.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:34.820Z,1528927714.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:35.213Z,1528927715.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:35.640Z,1528927715.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:36.022Z,1528927716.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:37.212Z,1528927717.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:37.364Z,1528927717.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:37.703Z,1528927717.703 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T22:08:37.703Z,1528927717.703 [NAL9602] Data Fault, FailCount= 2
2018-06-13T22:08:37.703Z,1528927717.703 [NAL9602](ERROR): Data Fault
2018-06-13T22:08:37.766Z,1528927717.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:37.853Z,1528927717.853 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T22:08:38.105Z,1528927718.105 [NAL9602](INFO): Powering down
2018-06-13T22:08:38.173Z,1528927718.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:38.544Z,1528927718.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:38.939Z,1528927718.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:39.013Z,1528927719.013 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T22:08:39.013Z,1528927719.013 [NAL9602] No Fault, FailCount= 2
2018-06-13T22:08:39.341Z,1528927719.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:39.744Z,1528927719.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:40.147Z,1528927720.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:40.541Z,1528927720.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:40.942Z,1528927720.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:41.369Z,1528927721.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:41.746Z,1528927721.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:42.143Z,1528927722.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:42.543Z,1528927722.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:42.942Z,1528927722.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:43.348Z,1528927723.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:43.743Z,1528927723.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:44.142Z,1528927724.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:44.542Z,1528927724.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:44.948Z,1528927724.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:45.343Z,1528927725.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:45.744Z,1528927725.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:46.149Z,1528927726.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:46.547Z,1528927726.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:47.032Z,1528927727.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:47.455Z,1528927727.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:47.742Z,1528927727.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:48.278Z,1528927728.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:48.562Z,1528927728.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:48.936Z,1528927728.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:49.339Z,1528927729.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:49.745Z,1528927729.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:50.140Z,1528927730.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:50.540Z,1528927730.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:50.948Z,1528927730.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:51.339Z,1528927731.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:51.740Z,1528927731.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:52.144Z,1528927732.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:52.542Z,1528927732.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:52.944Z,1528927732.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:53.343Z,1528927733.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:53.742Z,1528927733.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:54.142Z,1528927734.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:54.543Z,1528927734.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:54.942Z,1528927734.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:55.343Z,1528927735.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:55.741Z,1528927735.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:56.142Z,1528927736.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:56.545Z,1528927736.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:56.944Z,1528927736.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:57.350Z,1528927737.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:57.748Z,1528927737.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:58.152Z,1528927738.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:58.543Z,1528927738.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:58.941Z,1528927738.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:59.347Z,1528927739.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:08:59.753Z,1528927739.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:00.141Z,1528927740.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:00.548Z,1528927740.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:00.939Z,1528927740.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:01.339Z,1528927741.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:01.743Z,1528927741.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:02.143Z,1528927742.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:02.539Z,1528927742.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:02.943Z,1528927742.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:03.342Z,1528927743.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:03.737Z,1528927743.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:04.142Z,1528927744.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:04.550Z,1528927744.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:04.939Z,1528927744.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:05.342Z,1528927745.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:05.741Z,1528927745.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:06.140Z,1528927746.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:06.544Z,1528927746.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:06.945Z,1528927746.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:07.341Z,1528927747.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:07.744Z,1528927747.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:08.145Z,1528927748.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:08.502Z,1528927748.502 [NAL9602](INFO): Powering up NAL9602
2018-06-13T22:09:08.549Z,1528927748.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:08.944Z,1528927748.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:09.352Z,1528927749.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:09.744Z,1528927749.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:10.147Z,1528927750.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:10.553Z,1528927750.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:10.950Z,1528927750.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:11.353Z,1528927751.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:11.756Z,1528927751.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:12.149Z,1528927752.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:12.550Z,1528927752.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:12.950Z,1528927752.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:13.339Z,1528927753.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:13.753Z,1528927753.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:14.157Z,1528927754.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:14.552Z,1528927754.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:14.936Z,1528927754.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:15.335Z,1528927755.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:15.736Z,1528927755.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:16.165Z,1528927756.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:16.540Z,1528927756.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:16.934Z,1528927756.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:17.339Z,1528927757.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:17.738Z,1528927757.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:18.135Z,1528927758.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:18.539Z,1528927758.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:18.972Z,1528927758.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:19.301Z,1528927759.301 [NAL9602](INFO): NAL9602 initialized
2018-06-13T22:09:19.336Z,1528927759.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:19.744Z,1528927759.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:20.167Z,1528927760.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:20.551Z,1528927760.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:20.952Z,1528927760.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:21.350Z,1528927761.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:21.747Z,1528927761.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:22.179Z,1528927762.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:22.560Z,1528927762.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:23.735Z,1528927763.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:23.874Z,1528927763.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:24.300Z,1528927764.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:24.693Z,1528927764.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:25.100Z,1528927765.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:25.484Z,1528927765.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:25.872Z,1528927765.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:26.276Z,1528927766.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:26.669Z,1528927766.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:27.105Z,1528927767.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:27.504Z,1528927767.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:28.650Z,1528927768.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:28.787Z,1528927768.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:29.202Z,1528927769.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:29.606Z,1528927769.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:30.003Z,1528927770.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:30.402Z,1528927770.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:30.816Z,1528927770.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:31.192Z,1528927771.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:31.584Z,1528927771.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:32.014Z,1528927772.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:33.206Z,1528927773.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:33.367Z,1528927773.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:33.761Z,1528927773.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:34.163Z,1528927774.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:34.562Z,1528927774.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:34.952Z,1528927774.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:35.358Z,1528927775.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:35.761Z,1528927775.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:36.176Z,1528927776.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:36.571Z,1528927776.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:37.791Z,1528927777.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:37.947Z,1528927777.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:38.372Z,1528927778.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:38.754Z,1528927778.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:39.155Z,1528927779.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:39.547Z,1528927779.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:39.947Z,1528927779.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:40.348Z,1528927780.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:40.744Z,1528927780.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:41.175Z,1528927781.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:41.581Z,1528927781.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:42.784Z,1528927782.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:42.935Z,1528927782.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:43.338Z,1528927783.338 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:43.338Z,1528927783.338 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 373
2018-06-13T22:09:43.338Z,1528927783.338 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T22:09:43.340Z,1528927783.340 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:43.340Z,1528927783.340 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 373
2018-06-13T22:09:43.340Z,1528927783.340 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T22:09:43.342Z,1528927783.342 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:43.342Z,1528927783.342 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 373
2018-06-13T22:09:43.342Z,1528927783.342 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T22:09:43.421Z,1528927783.421 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T22:09:43.422Z,1528927783.422 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T22:09:43.422Z,1528927783.422 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T22:09:43.821Z,1528927783.821 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T22:09:43.821Z,1528927783.821 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 373
2018-06-13T22:09:43.822Z,1528927783.822 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T22:09:43.822Z,1528927783.822 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 373
2018-06-13T22:09:43.822Z,1528927783.822 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T22:09:43.822Z,1528927783.822 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 373
2018-06-13T22:09:44.146Z,1528927784.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T22:09:44.146Z,1528927784.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:09:44.146Z,1528927784.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:09:44.147Z,1528927784.147 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T22:09:44.147Z,1528927784.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:09:44.147Z,1528927784.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:09:44.148Z,1528927784.148 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T22:09:44.148Z,1528927784.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:09:44.148Z,1528927784.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:09:44.519Z,1528927784.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T22:09:44.520Z,1528927784.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:44.919Z,1528927784.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T22:09:44.920Z,1528927784.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:45.319Z,1528927785.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2018-06-13T22:09:45.320Z,1528927785.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:45.724Z,1528927785.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T22:09:45.741Z,1528927785.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:46.150Z,1528927786.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2018-06-13T22:09:46.151Z,1528927786.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:46.542Z,1528927786.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T22:09:46.543Z,1528927786.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:47.764Z,1528927787.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T22:09:47.765Z,1528927787.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:47.898Z,1528927787.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2018-06-13T22:09:47.899Z,1528927787.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:48.309Z,1528927788.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2018-06-13T22:09:48.310Z,1528927788.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:48.712Z,1528927788.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2018-06-13T22:09:48.713Z,1528927788.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:49.106Z,1528927789.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T22:09:49.107Z,1528927789.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:49.500Z,1528927789.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T22:09:49.501Z,1528927789.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:49.900Z,1528927789.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T22:09:49.901Z,1528927789.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:50.311Z,1528927790.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T22:09:50.312Z,1528927790.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:50.702Z,1528927790.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T22:09:50.703Z,1528927790.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:51.115Z,1528927791.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T22:09:51.115Z,1528927791.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:51.515Z,1528927791.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T22:09:51.516Z,1528927791.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:52.718Z,1528927792.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T22:09:52.719Z,1528927792.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:52.871Z,1528927792.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T22:09:52.872Z,1528927792.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:53.273Z,1528927793.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.9 s old, using for 20.0 s.
2018-06-13T22:09:53.274Z,1528927793.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:53.676Z,1528927793.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2018-06-13T22:09:53.677Z,1528927793.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:54.072Z,1528927794.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T22:09:54.073Z,1528927794.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:54.460Z,1528927794.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.1 s old, using for 20.0 s.
2018-06-13T22:09:54.461Z,1528927794.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:54.884Z,1528927794.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.5 s old, using for 20.0 s.
2018-06-13T22:09:54.885Z,1528927794.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:55.262Z,1528927795.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.9 s old, using for 20.0 s.
2018-06-13T22:09:55.263Z,1528927795.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:55.678Z,1528927795.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.3 s old, using for 20.0 s.
2018-06-13T22:09:55.679Z,1528927795.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:57.280Z,1528927797.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.9 s old, using for 20.0 s.
2018-06-13T22:09:57.289Z,1528927797.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:57.499Z,1528927797.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T22:09:57.500Z,1528927797.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:57.892Z,1528927797.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T22:09:57.897Z,1528927797.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:58.297Z,1528927798.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T22:09:58.298Z,1528927798.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:58.703Z,1528927798.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T22:09:58.704Z,1528927798.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:59.098Z,1528927799.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T22:09:59.099Z,1528927799.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:59.460Z,1528927799.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T22:09:59.461Z,1528927799.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:09:59.895Z,1528927799.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T22:09:59.896Z,1528927799.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:00.289Z,1528927800.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T22:10:00.290Z,1528927800.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:01.437Z,1528927801.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T22:10:01.438Z,1528927801.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:01.566Z,1528927801.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2018-06-13T22:10:01.567Z,1528927801.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:01.000Z,1528927802.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T22:10:02.001Z,1528927802.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:02.400Z,1528927802.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T22:10:02.401Z,1528927802.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:02.796Z,1528927802.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T22:10:02.797Z,1528927802.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:03.194Z,1528927803.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T22:10:03.195Z,1528927803.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:03.594Z,1528927803.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:04.006Z,1528927804.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:04.400Z,1528927804.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:04.801Z,1528927804.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:06.005Z,1528927806.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:06.152Z,1528927806.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:06.554Z,1528927806.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:06.954Z,1528927806.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:07.364Z,1528927807.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:07.757Z,1528927807.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:08.158Z,1528927808.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:08.554Z,1528927808.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:08.983Z,1528927808.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:09.362Z,1528927809.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:10.573Z,1528927810.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:10.725Z,1528927810.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:11.117Z,1528927811.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:11.517Z,1528927811.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:11.923Z,1528927811.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:12.319Z,1528927812.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:12.716Z,1528927812.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:13.129Z,1528927813.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:13.526Z,1528927813.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:14.672Z,1528927814.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:14.794Z,1528927814.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:15.243Z,1528927815.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:15.630Z,1528927815.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:16.029Z,1528927816.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:16.404Z,1528927816.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:16.804Z,1528927816.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:17.232Z,1528927817.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:17.628Z,1528927817.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:18.782Z,1528927818.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:18.939Z,1528927818.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:19.336Z,1528927819.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:19.742Z,1528927819.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:20.137Z,1528927820.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:20.530Z,1528927820.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:20.935Z,1528927820.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:21.325Z,1528927821.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:21.735Z,1528927821.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:22.145Z,1528927822.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:22.539Z,1528927822.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:23.711Z,1528927823.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:23.888Z,1528927823.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:24.295Z,1528927824.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:24.692Z,1528927824.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:25.092Z,1528927825.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:25.482Z,1528927825.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:25.907Z,1528927825.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:26.285Z,1528927826.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:26.690Z,1528927826.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:27.894Z,1528927827.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:28.031Z,1528927828.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:28.438Z,1528927828.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:28.842Z,1528927828.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:29.244Z,1528927829.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:29.616Z,1528927829.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:30.033Z,1528927830.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:30.416Z,1528927830.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:30.821Z,1528927830.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:31.248Z,1528927831.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:31.643Z,1528927831.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:32.854Z,1528927832.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:33.008Z,1528927833.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:33.420Z,1528927833.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:33.814Z,1528927833.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:34.210Z,1528927834.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:34.604Z,1528927834.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:35.008Z,1528927835.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:35.402Z,1528927835.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:35.809Z,1528927835.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:36.222Z,1528927836.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:36.687Z,1528927836.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:37.914Z,1528927837.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:38.039Z,1528927838.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:38.472Z,1528927838.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:38.870Z,1528927838.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:39.275Z,1528927839.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:39.669Z,1528927839.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:40.071Z,1528927840.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:40.446Z,1528927840.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:40.850Z,1528927840.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:41.280Z,1528927841.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:41.671Z,1528927841.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:42.870Z,1528927842.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:43.028Z,1528927843.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:43.432Z,1528927843.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:43.829Z,1528927843.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:44.235Z,1528927844.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:44.629Z,1528927844.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:45.025Z,1528927845.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:45.405Z,1528927845.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:45.832Z,1528927845.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:46.248Z,1528927846.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:46.638Z,1528927846.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:47.837Z,1528927847.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:47.976Z,1528927847.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:48.393Z,1528927848.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:48.796Z,1528927848.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:49.194Z,1528927849.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:49.590Z,1528927849.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:49.991Z,1528927849.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:50.392Z,1528927850.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:50.804Z,1528927850.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:51.204Z,1528927851.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:51.599Z,1528927851.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:52.815Z,1528927852.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:52.991Z,1528927852.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:53.396Z,1528927853.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:53.796Z,1528927853.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:54.193Z,1528927854.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:54.590Z,1528927854.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:54.993Z,1528927854.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:55.373Z,1528927855.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:55.772Z,1528927855.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:56.202Z,1528927856.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:56.602Z,1528927856.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:57.871Z,1528927857.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:58.020Z,1528927858.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:58.447Z,1528927858.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:58.852Z,1528927858.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:59.247Z,1528927859.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:10:59.620Z,1528927859.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:00.021Z,1528927860.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:00.419Z,1528927860.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:00.819Z,1528927860.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:01.254Z,1528927861.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:01.651Z,1528927861.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:02.856Z,1528927862.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:03.015Z,1528927863.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:03.410Z,1528927863.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:03.810Z,1528927863.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:04.209Z,1528927864.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:04.611Z,1528927864.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:05.012Z,1528927865.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:05.405Z,1528927865.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:05.809Z,1528927865.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:06.221Z,1528927866.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:06.618Z,1528927866.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:07.826Z,1528927867.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:07.962Z,1528927867.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:08.372Z,1528927868.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:08.775Z,1528927868.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:09.176Z,1528927869.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:09.571Z,1528927869.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:09.989Z,1528927869.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:10.366Z,1528927870.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:10.779Z,1528927870.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:11.932Z,1528927871.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:12.058Z,1528927872.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:12.484Z,1528927872.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:12.880Z,1528927872.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:13.278Z,1528927873.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:13.673Z,1528927873.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:14.085Z,1528927874.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:14.472Z,1528927874.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:14.877Z,1528927874.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:15.289Z,1528927875.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:15.681Z,1528927875.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:16.880Z,1528927876.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:17.034Z,1528927877.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:17.430Z,1528927877.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:17.834Z,1528927877.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:18.230Z,1528927878.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:18.630Z,1528927878.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:19.032Z,1528927879.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:19.413Z,1528927879.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:19.826Z,1528927879.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:20.242Z,1528927880.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:20.635Z,1528927880.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:21.847Z,1528927881.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:21.985Z,1528927881.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:22.389Z,1528927882.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:22.790Z,1528927882.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:23.190Z,1528927883.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:23.595Z,1528927883.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:24.001Z,1528927884.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:24.364Z,1528927884.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:24.800Z,1528927884.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:25.967Z,1528927885.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:26.115Z,1528927886.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:26.544Z,1528927886.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:26.948Z,1528927886.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:27.349Z,1528927887.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:27.731Z,1528927887.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:28.129Z,1528927888.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:28.525Z,1528927888.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:28.932Z,1528927888.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:29.369Z,1528927889.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:29.735Z,1528927889.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:30.917Z,1528927890.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:31.075Z,1528927891.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:31.471Z,1528927891.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:31.873Z,1528927891.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:32.283Z,1528927892.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:32.664Z,1528927892.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:33.066Z,1528927893.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:33.465Z,1528927893.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:33.865Z,1528927893.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:34.284Z,1528927894.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:34.674Z,1528927894.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:35.864Z,1528927895.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:36.027Z,1528927896.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:36.422Z,1528927896.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:36.840Z,1528927896.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:37.218Z,1528927897.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:37.613Z,1528927897.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:38.032Z,1528927898.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:38.423Z,1528927898.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:38.832Z,1528927898.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:39.990Z,1528927899.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:40.142Z,1528927900.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:40.570Z,1528927900.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:40.980Z,1528927900.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:41.371Z,1528927901.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:41.769Z,1528927901.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:42.152Z,1528927902.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:42.551Z,1528927902.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:42.953Z,1528927902.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:43.383Z,1528927903.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:43.778Z,1528927903.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:44.986Z,1528927904.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:45.144Z,1528927905.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:45.543Z,1528927905.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:45.952Z,1528927905.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:46.341Z,1528927906.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:46.781Z,1528927906.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:47.136Z,1528927907.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:47.538Z,1528927907.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:47.943Z,1528927907.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:48.351Z,1528927908.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:48.743Z,1528927908.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:49.986Z,1528927909.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:50.116Z,1528927910.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:50.548Z,1528927910.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:50.944Z,1528927910.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:51.348Z,1528927911.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:51.740Z,1528927911.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:52.124Z,1528927912.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:52.521Z,1528927912.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:52.924Z,1528927912.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:53.352Z,1528927913.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:53.745Z,1528927913.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:55.098Z,1528927915.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:55.256Z,1528927915.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:55.660Z,1528927915.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:56.095Z,1528927916.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:56.456Z,1528927916.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:56.859Z,1528927916.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:57.256Z,1528927917.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:57.647Z,1528927917.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:58.075Z,1528927918.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:58.463Z,1528927918.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:59.654Z,1528927919.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:11:59.808Z,1528927919.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:00.208Z,1528927920.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:00.611Z,1528927920.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:01.009Z,1528927921.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:01.410Z,1528927921.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:01.785Z,1528927921.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:02.225Z,1528927922.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:02.613Z,1528927922.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:03.014Z,1528927923.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:04.216Z,1528927924.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:04.367Z,1528927924.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:04.765Z,1528927924.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:05.184Z,1528927925.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:05.575Z,1528927925.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:05.952Z,1528927925.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:06.348Z,1528927926.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:06.748Z,1528927926.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:07.178Z,1528927927.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:07.578Z,1528927927.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:08.724Z,1528927928.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:08.887Z,1528927928.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:09.286Z,1528927929.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:09.687Z,1528927929.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:10.087Z,1528927930.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:10.484Z,1528927930.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:10.878Z,1528927930.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:11.300Z,1528927931.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:11.685Z,1528927931.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:12.087Z,1528927932.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:13.284Z,1528927933.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:13.423Z,1528927933.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:13.838Z,1528927933.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:14.245Z,1528927934.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:14.640Z,1528927934.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:15.026Z,1528927935.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:15.441Z,1528927935.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:15.835Z,1528927935.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:16.261Z,1528927936.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:16.647Z,1528927936.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:17.839Z,1528927937.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:17.992Z,1528927937.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:18.393Z,1528927938.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:18.799Z,1528927938.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:19.192Z,1528927939.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:19.591Z,1528927939.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:19.990Z,1528927939.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:20.404Z,1528927940.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:20.798Z,1528927940.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:21.956Z,1528927941.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:22.112Z,1528927942.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:22.520Z,1528927942.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:22.900Z,1528927942.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:23.332Z,1528927943.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:23.689Z,1528927943.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:24.124Z,1528927944.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:24.521Z,1528927944.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:25.678Z,1528927945.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:25.814Z,1528927945.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:26.234Z,1528927946.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:26.639Z,1528927946.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:27.033Z,1528927947.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:27.430Z,1528927947.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:27.831Z,1528927947.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:28.242Z,1528927948.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:28.636Z,1528927948.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:29.039Z,1528927949.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:30.192Z,1528927950.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:30.348Z,1528927950.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:30.742Z,1528927950.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:31.139Z,1528927951.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:31.547Z,1528927951.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:31.939Z,1528927951.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:32.336Z,1528927952.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:32.736Z,1528927952.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:33.149Z,1528927953.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:33.547Z,1528927953.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:34.791Z,1528927954.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:34.948Z,1528927954.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:35.360Z,1528927955.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:35.749Z,1528927955.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:36.153Z,1528927956.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:36.544Z,1528927956.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:36.942Z,1528927956.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.398550 seconds old.
2018-06-13T22:12:36.943Z,1528927956.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:36.944Z,1528927956.944 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.399008 seconds old.
2018-06-13T22:12:36.945Z,1528927956.945 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.399153 seconds old.
2018-06-13T22:12:37.356Z,1528927957.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.812650 seconds old.
2018-06-13T22:12:37.357Z,1528927957.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:37.358Z,1528927957.358 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.813243 seconds old.
2018-06-13T22:12:37.359Z,1528927957.359 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.813386 seconds old.
2018-06-13T22:12:37.750Z,1528927957.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.206883 seconds old.
2018-06-13T22:12:37.751Z,1528927957.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:37.752Z,1528927957.752 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.207244 seconds old.
2018-06-13T22:12:37.753Z,1528927957.753 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.207558 seconds old.
2018-06-13T22:12:38.914Z,1528927958.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.371210 seconds old.
2018-06-13T22:12:38.915Z,1528927958.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:38.916Z,1528927958.916 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.371558 seconds old.
2018-06-13T22:12:38.917Z,1528927958.917 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.371774 seconds old.
2018-06-13T22:12:39.097Z,1528927959.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.554349 seconds old.
2018-06-13T22:12:39.098Z,1528927959.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:39.099Z,1528927959.099 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.554682 seconds old.
2018-06-13T22:12:39.100Z,1528927959.100 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.554799 seconds old.
2018-06-13T22:12:39.497Z,1528927959.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:39.897Z,1528927959.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:40.297Z,1528927960.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:40.689Z,1528927960.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:41.112Z,1528927961.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:41.499Z,1528927961.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:42.684Z,1528927962.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:42.847Z,1528927962.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:43.248Z,1528927963.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:43.652Z,1528927963.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:44.044Z,1528927964.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:44.444Z,1528927964.444 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:44.444Z,1528927964.444 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 374
2018-06-13T22:12:44.444Z,1528927964.444 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T22:12:44.446Z,1528927964.446 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:44.446Z,1528927964.446 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 374
2018-06-13T22:12:44.446Z,1528927964.446 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T22:12:44.448Z,1528927964.448 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:44.448Z,1528927964.448 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 374
2018-06-13T22:12:44.448Z,1528927964.448 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T22:12:44.525Z,1528927964.525 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T22:12:44.525Z,1528927964.525 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T22:12:44.526Z,1528927964.526 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T22:12:44.930Z,1528927964.930 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T22:12:44.930Z,1528927964.930 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 374
2018-06-13T22:12:44.931Z,1528927964.931 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T22:12:44.931Z,1528927964.931 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 374
2018-06-13T22:12:44.931Z,1528927964.931 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T22:12:44.931Z,1528927964.931 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 374
2018-06-13T22:12:45.253Z,1528927965.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T22:12:45.253Z,1528927965.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:12:45.254Z,1528927965.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:12:45.254Z,1528927965.254 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T22:12:45.254Z,1528927965.254 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:12:45.255Z,1528927965.255 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:12:45.255Z,1528927965.255 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T22:12:45.255Z,1528927965.255 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:12:45.256Z,1528927965.256 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:12:45.649Z,1528927965.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T22:12:45.650Z,1528927965.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:46.809Z,1528927966.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2018-06-13T22:12:46.810Z,1528927966.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:46.956Z,1528927966.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T22:12:46.962Z,1528927966.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:47.370Z,1528927967.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T22:12:47.371Z,1528927967.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:47.775Z,1528927967.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T22:12:47.776Z,1528927967.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:48.168Z,1528927968.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T22:12:48.169Z,1528927968.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:48.560Z,1528927968.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T22:12:48.561Z,1528927968.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:48.964Z,1528927968.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T22:12:48.965Z,1528927968.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:49.382Z,1528927969.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T22:12:49.383Z,1528927969.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:49.772Z,1528927969.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2018-06-13T22:12:49.773Z,1528927969.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:50.973Z,1528927970.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2018-06-13T22:12:50.974Z,1528927970.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:51.151Z,1528927971.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T22:12:51.152Z,1528927971.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:51.554Z,1528927971.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T22:12:51.555Z,1528927971.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:51.934Z,1528927971.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T22:12:51.935Z,1528927971.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:52.340Z,1528927972.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T22:12:52.357Z,1528927972.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:52.726Z,1528927972.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2018-06-13T22:12:52.727Z,1528927972.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:53.164Z,1528927973.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.7 s old, using for 20.0 s.
2018-06-13T22:12:53.165Z,1528927973.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:53.525Z,1528927973.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2018-06-13T22:12:53.526Z,1528927973.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:53.963Z,1528927973.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.5 s old, using for 20.0 s.
2018-06-13T22:12:53.963Z,1528927973.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:55.111Z,1528927975.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.7 s old, using for 20.0 s.
2018-06-13T22:12:55.112Z,1528927975.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:55.271Z,1528927975.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T22:12:55.272Z,1528927975.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:55.664Z,1528927975.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T22:12:55.665Z,1528927975.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:56.064Z,1528927976.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T22:12:56.065Z,1528927976.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:56.467Z,1528927976.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T22:12:56.468Z,1528927976.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:56.861Z,1528927976.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T22:12:56.862Z,1528927976.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:57.318Z,1528927977.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2018-06-13T22:12:57.319Z,1528927977.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:57.666Z,1528927977.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T22:12:57.667Z,1528927977.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:58.106Z,1528927978.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2018-06-13T22:12:58.107Z,1528927978.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:58.467Z,1528927978.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T22:12:58.468Z,1528927978.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:12:58.860Z,1528927978.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2018-06-13T22:12:58.861Z,1528927978.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:00.046Z,1528927980.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2018-06-13T22:13:00.047Z,1528927980.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:00.203Z,1528927980.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2018-06-13T22:13:00.204Z,1528927980.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:00.620Z,1528927980.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2018-06-13T22:13:00.621Z,1528927980.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:01.005Z,1528927981.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T22:13:01.006Z,1528927981.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:01.398Z,1528927981.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2018-06-13T22:13:01.399Z,1528927981.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:01.800Z,1528927981.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2018-06-13T22:13:01.801Z,1528927981.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:02.200Z,1528927982.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2018-06-13T22:13:02.242Z,1528927982.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:02.587Z,1528927982.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T22:13:02.587Z,1528927982.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:02.990Z,1528927982.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T22:13:02.991Z,1528927982.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:03.425Z,1528927983.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2018-06-13T22:13:03.426Z,1528927983.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:03.805Z,1528927983.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.3 s old, using for 20.0 s.
2018-06-13T22:13:03.806Z,1528927983.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:04.991Z,1528927984.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:05.175Z,1528927985.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:05.572Z,1528927985.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:05.977Z,1528927985.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:06.383Z,1528927986.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:06.766Z,1528927986.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:07.186Z,1528927987.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:07.565Z,1528927987.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:07.984Z,1528927987.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:09.136Z,1528927989.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:09.283Z,1528927989.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:09.675Z,1528927989.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:10.077Z,1528927990.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:10.478Z,1528927990.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:10.872Z,1528927990.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:11.279Z,1528927991.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:11.656Z,1528927991.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:12.077Z,1528927992.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:12.490Z,1528927992.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:12.883Z,1528927992.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:14.090Z,1528927994.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:14.227Z,1528927994.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:14.649Z,1528927994.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:15.056Z,1528927995.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:15.447Z,1528927995.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:15.843Z,1528927995.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:16.243Z,1528927996.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:16.643Z,1528927996.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:17.043Z,1528927997.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:17.457Z,1528927997.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:17.851Z,1528927997.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:19.059Z,1528927999.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:19.235Z,1528927999.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:19.639Z,1528927999.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:20.039Z,1528928000.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:20.419Z,1528928000.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:20.811Z,1528928000.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:21.212Z,1528928001.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:21.612Z,1528928001.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:22.016Z,1528928002.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:22.444Z,1528928002.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:22.819Z,1528928002.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:24.040Z,1528928004.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:24.209Z,1528928004.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:24.607Z,1528928004.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:25.008Z,1528928005.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:25.404Z,1528928005.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:25.802Z,1528928005.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:26.217Z,1528928006.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:26.598Z,1528928006.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:27.006Z,1528928007.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:28.189Z,1528928008.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:28.344Z,1528928008.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:28.751Z,1528928008.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:29.156Z,1528928009.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:29.554Z,1528928009.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:29.937Z,1528928009.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:30.357Z,1528928010.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:30.749Z,1528928010.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:31.133Z,1528928011.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:31.568Z,1528928011.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:31.957Z,1528928011.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:33.127Z,1528928013.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:33.299Z,1528928013.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:33.703Z,1528928013.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:34.106Z,1528928014.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:34.483Z,1528928014.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:34.880Z,1528928014.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:35.283Z,1528928015.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:35.674Z,1528928015.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:36.074Z,1528928016.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:36.507Z,1528928016.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:36.883Z,1528928016.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:38.109Z,1528928018.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:38.255Z,1528928018.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:38.677Z,1528928018.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:39.070Z,1528928019.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:39.471Z,1528928019.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:39.862Z,1528928019.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:40.272Z,1528928020.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:40.669Z,1528928020.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:41.068Z,1528928021.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:41.478Z,1528928021.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:41.872Z,1528928021.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:43.118Z,1528928023.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:43.276Z,1528928023.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:43.673Z,1528928023.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:44.078Z,1528928024.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:44.474Z,1528928024.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:44.868Z,1528928024.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:45.268Z,1528928025.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:45.652Z,1528928025.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:46.074Z,1528928026.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:46.486Z,1528928026.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:46.878Z,1528928026.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:48.086Z,1528928028.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:48.250Z,1528928028.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:48.646Z,1528928028.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:49.045Z,1528928029.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:49.444Z,1528928029.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:49.843Z,1528928029.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:50.253Z,1528928030.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:50.636Z,1528928030.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:51.044Z,1528928031.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:52.207Z,1528928032.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:52.358Z,1528928032.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:52.792Z,1528928032.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:53.191Z,1528928033.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:53.596Z,1528928033.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:53.979Z,1528928033.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:54.374Z,1528928034.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:54.771Z,1528928034.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:55.175Z,1528928035.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:55.603Z,1528928035.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:55.979Z,1528928035.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:57.162Z,1528928037.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:57.307Z,1528928037.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:57.714Z,1528928037.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:58.114Z,1528928038.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:58.514Z,1528928038.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:58.911Z,1528928038.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:59.308Z,1528928039.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:13:59.710Z,1528928039.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:00.111Z,1528928040.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:00.526Z,1528928040.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:00.915Z,1528928040.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:02.109Z,1528928042.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:02.254Z,1528928042.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:02.669Z,1528928042.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:03.063Z,1528928043.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:03.467Z,1528928043.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:03.838Z,1528928043.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:04.275Z,1528928044.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:04.637Z,1528928044.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:05.068Z,1528928045.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:06.278Z,1528928046.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:06.431Z,1528928046.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:06.833Z,1528928046.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:07.238Z,1528928047.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:07.633Z,1528928047.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:08.021Z,1528928048.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:08.431Z,1528928048.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:08.822Z,1528928048.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:09.244Z,1528928049.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:09.633Z,1528928049.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:10.833Z,1528928050.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:10.988Z,1528928050.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:11.378Z,1528928051.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:11.823Z,1528928051.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:12.219Z,1528928052.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:12.593Z,1528928052.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:12.956Z,1528928052.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:13.405Z,1528928053.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:13.798Z,1528928053.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:14.949Z,1528928054.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:15.100Z,1528928055.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:15.509Z,1528928055.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:15.907Z,1528928055.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:16.315Z,1528928056.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:16.702Z,1528928056.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:17.108Z,1528928057.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:17.516Z,1528928057.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:17.908Z,1528928057.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:19.058Z,1528928059.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:19.180Z,1528928059.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:19.605Z,1528928059.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:19.999Z,1528928059.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:20.411Z,1528928060.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:20.788Z,1528928060.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:21.181Z,1528928061.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:21.626Z,1528928061.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:21.984Z,1528928061.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:22.411Z,1528928062.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:23.581Z,1528928063.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:23.727Z,1528928063.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:24.120Z,1528928064.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:24.521Z,1528928064.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:24.922Z,1528928064.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:25.316Z,1528928065.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:25.717Z,1528928065.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:26.101Z,1528928066.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:26.532Z,1528928066.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:26.930Z,1528928066.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:28.078Z,1528928068.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:28.228Z,1528928068.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:28.630Z,1528928068.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:29.030Z,1528928069.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:29.431Z,1528928069.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:29.826Z,1528928069.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:30.232Z,1528928070.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:30.640Z,1528928070.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:31.030Z,1528928071.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:31.434Z,1528928071.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:32.678Z,1528928072.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:32.822Z,1528928072.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:33.248Z,1528928073.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:33.639Z,1528928073.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:34.038Z,1528928074.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:34.433Z,1528928074.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:34.840Z,1528928074.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:35.225Z,1528928075.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:35.654Z,1528928075.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:36.040Z,1528928076.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:37.204Z,1528928077.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:37.363Z,1528928077.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:37.754Z,1528928077.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:38.150Z,1528928078.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:38.570Z,1528928078.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:38.952Z,1528928078.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:39.345Z,1528928079.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:39.754Z,1528928079.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:40.150Z,1528928080.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:40.566Z,1528928080.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:40.960Z,1528928080.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:42.121Z,1528928082.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:42.264Z,1528928082.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:42.665Z,1528928082.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:43.072Z,1528928083.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:43.470Z,1528928083.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:43.862Z,1528928083.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:44.264Z,1528928084.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:44.680Z,1528928084.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:45.070Z,1528928085.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:46.226Z,1528928086.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:46.380Z,1528928086.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:46.781Z,1528928086.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:47.186Z,1528928087.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:47.582Z,1528928087.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:47.972Z,1528928087.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:48.375Z,1528928088.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:48.772Z,1528928088.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:49.182Z,1528928089.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:49.596Z,1528928089.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:49.982Z,1528928089.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:51.177Z,1528928091.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:51.335Z,1528928091.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:51.733Z,1528928091.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:52.147Z,1528928092.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:52.530Z,1528928092.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:52.925Z,1528928092.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:53.344Z,1528928093.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:53.727Z,1528928093.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:54.129Z,1528928094.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:54.534Z,1528928094.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:55.730Z,1528928095.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:55.884Z,1528928095.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:56.287Z,1528928096.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:56.687Z,1528928096.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:57.082Z,1528928097.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:57.481Z,1528928097.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:57.868Z,1528928097.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:58.286Z,1528928098.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:58.695Z,1528928098.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:14:59.082Z,1528928099.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:00.266Z,1528928100.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:00.441Z,1528928100.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:00.852Z,1528928100.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:01.250Z,1528928101.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:01.642Z,1528928101.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:02.024Z,1528928102.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:02.423Z,1528928102.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:02.825Z,1528928102.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:03.225Z,1528928103.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:03.652Z,1528928103.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:04.046Z,1528928104.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:05.207Z,1528928105.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:05.352Z,1528928105.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:05.754Z,1528928105.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:06.159Z,1528928106.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:06.560Z,1528928106.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:06.937Z,1528928106.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:07.376Z,1528928107.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:07.737Z,1528928107.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:08.162Z,1528928108.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:09.321Z,1528928109.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:09.467Z,1528928109.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:09.868Z,1528928109.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:10.269Z,1528928110.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:10.666Z,1528928110.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:11.062Z,1528928111.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:11.464Z,1528928111.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:11.863Z,1528928111.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:12.262Z,1528928112.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:12.677Z,1528928112.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:13.068Z,1528928113.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:14.256Z,1528928114.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:14.402Z,1528928114.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:14.821Z,1528928114.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:15.224Z,1528928115.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:15.619Z,1528928115.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:16.014Z,1528928116.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:16.415Z,1528928116.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:16.815Z,1528928116.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:17.220Z,1528928117.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:17.636Z,1528928117.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:18.020Z,1528928118.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:19.188Z,1528928119.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:19.361Z,1528928119.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:19.755Z,1528928119.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:20.160Z,1528928120.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:20.563Z,1528928120.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:20.947Z,1528928120.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:21.371Z,1528928121.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:21.740Z,1528928121.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:22.148Z,1528928122.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:22.572Z,1528928122.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:23.775Z,1528928123.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:23.932Z,1528928123.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:24.336Z,1528928124.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:24.730Z,1528928124.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:25.129Z,1528928125.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:25.520Z,1528928125.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:25.933Z,1528928125.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:26.329Z,1528928126.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:26.748Z,1528928126.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:27.134Z,1528928127.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:28.298Z,1528928128.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:28.452Z,1528928128.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:28.849Z,1528928128.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:29.248Z,1528928129.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:29.660Z,1528928129.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:30.040Z,1528928130.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:30.448Z,1528928130.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:30.841Z,1528928130.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:31.241Z,1528928131.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:31.664Z,1528928131.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:32.049Z,1528928132.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:33.240Z,1528928133.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:33.399Z,1528928133.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:33.798Z,1528928133.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:34.196Z,1528928134.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:34.597Z,1528928134.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:34.994Z,1528928134.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:35.404Z,1528928135.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:35.790Z,1528928135.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:36.201Z,1528928136.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:37.362Z,1528928137.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:37.510Z,1528928137.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:37.906Z,1528928137.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:38.307Z,1528928138.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:38.718Z,1528928138.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:39.096Z,1528928139.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:39.499Z,1528928139.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:39.899Z,1528928139.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:40.297Z,1528928140.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:40.714Z,1528928140.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:41.106Z,1528928141.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:42.275Z,1528928142.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:42.420Z,1528928142.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:42.827Z,1528928142.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:43.228Z,1528928143.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:43.644Z,1528928143.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:44.028Z,1528928144.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:44.416Z,1528928144.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:44.818Z,1528928144.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:45.247Z,1528928145.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:45.650Z,1528928145.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:45.650Z,1528928145.650 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 375
2018-06-13T22:15:45.650Z,1528928145.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T22:15:45.652Z,1528928145.652 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:45.652Z,1528928145.652 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 375
2018-06-13T22:15:45.652Z,1528928145.652 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T22:15:45.658Z,1528928145.658 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:45.658Z,1528928145.658 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 375
2018-06-13T22:15:45.658Z,1528928145.658 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T22:15:45.737Z,1528928145.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T22:15:45.737Z,1528928145.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T22:15:45.738Z,1528928145.738 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T22:15:46.133Z,1528928146.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T22:15:46.133Z,1528928146.133 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 375
2018-06-13T22:15:46.134Z,1528928146.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T22:15:46.134Z,1528928146.134 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 375
2018-06-13T22:15:46.134Z,1528928146.134 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T22:15:46.134Z,1528928146.134 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 375
2018-06-13T22:15:47.221Z,1528928147.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T22:15:47.222Z,1528928147.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:15:47.222Z,1528928147.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:15:47.222Z,1528928147.222 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T22:15:47.223Z,1528928147.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:15:47.223Z,1528928147.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:15:47.223Z,1528928147.223 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T22:15:47.224Z,1528928147.224 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:15:47.224Z,1528928147.224 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:15:47.368Z,1528928147.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T22:15:47.372Z,1528928147.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:47.770Z,1528928147.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T22:15:47.771Z,1528928147.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:48.184Z,1528928148.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T22:15:48.185Z,1528928148.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:48.569Z,1528928148.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T22:15:48.570Z,1528928148.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:48.952Z,1528928148.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2018-06-13T22:15:48.954Z,1528928148.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:49.380Z,1528928149.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T22:15:49.381Z,1528928149.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:49.751Z,1528928149.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2018-06-13T22:15:49.752Z,1528928149.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:50.177Z,1528928150.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2018-06-13T22:15:50.178Z,1528928150.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:51.336Z,1528928151.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2018-06-13T22:15:51.337Z,1528928151.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:51.480Z,1528928151.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2018-06-13T22:15:51.481Z,1528928151.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:51.881Z,1528928151.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2018-06-13T22:15:51.882Z,1528928151.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:52.287Z,1528928152.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2018-06-13T22:15:52.288Z,1528928152.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:52.682Z,1528928152.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2018-06-13T22:15:52.683Z,1528928152.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:53.077Z,1528928153.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2018-06-13T22:15:53.078Z,1528928153.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:53.477Z,1528928153.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2018-06-13T22:15:53.478Z,1528928153.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:53.878Z,1528928153.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.2 s old, using for 20.0 s.
2018-06-13T22:15:53.879Z,1528928153.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:54.277Z,1528928154.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2018-06-13T22:15:54.278Z,1528928154.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:54.693Z,1528928154.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T22:15:54.694Z,1528928154.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:55.085Z,1528928155.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.4 s old, using for 20.0 s.
2018-06-13T22:15:55.086Z,1528928155.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:56.274Z,1528928156.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.6 s old, using for 20.0 s.
2018-06-13T22:15:56.275Z,1528928156.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:56.431Z,1528928156.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T22:15:56.432Z,1528928156.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:56.830Z,1528928156.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T22:15:56.831Z,1528928156.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:57.249Z,1528928157.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T22:15:57.250Z,1528928157.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:57.640Z,1528928157.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T22:15:57.645Z,1528928157.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:58.036Z,1528928158.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T22:15:58.038Z,1528928158.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:58.451Z,1528928158.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T22:15:58.452Z,1528928158.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:58.808Z,1528928158.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2018-06-13T22:15:58.809Z,1528928158.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:15:59.236Z,1528928159.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2018-06-13T22:15:59.238Z,1528928159.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:00.396Z,1528928160.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.7 s old, using for 20.0 s.
2018-06-13T22:16:00.397Z,1528928160.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:00.515Z,1528928160.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T22:16:00.516Z,1528928160.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:00.952Z,1528928160.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T22:16:00.953Z,1528928160.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:01.347Z,1528928161.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T22:16:01.347Z,1528928161.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:01.745Z,1528928161.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T22:16:01.746Z,1528928161.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:02.143Z,1528928162.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T22:16:02.144Z,1528928162.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:02.545Z,1528928162.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T22:16:02.546Z,1528928162.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:02.920Z,1528928162.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.3 s old, using for 20.0 s.
2018-06-13T22:16:02.921Z,1528928162.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:03.328Z,1528928163.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.7 s old, using for 20.0 s.
2018-06-13T22:16:03.349Z,1528928163.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:03.773Z,1528928163.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T22:16:03.774Z,1528928163.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:04.151Z,1528928164.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.5 s old, using for 20.0 s.
2018-06-13T22:16:04.151Z,1528928164.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:05.322Z,1528928165.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.7 s old, using for 20.0 s.
2018-06-13T22:16:05.323Z,1528928165.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:05.467Z,1528928165.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2018-06-13T22:16:05.468Z,1528928165.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:05.870Z,1528928165.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:06.271Z,1528928166.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:06.666Z,1528928166.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:07.068Z,1528928167.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:07.464Z,1528928167.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:07.861Z,1528928167.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:08.270Z,1528928168.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:08.677Z,1528928168.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:09.068Z,1528928169.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:10.267Z,1528928170.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:10.429Z,1528928170.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:10.832Z,1528928170.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:11.229Z,1528928171.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:11.626Z,1528928171.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:12.017Z,1528928172.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:12.440Z,1528928172.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:12.820Z,1528928172.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:13.232Z,1528928173.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:14.385Z,1528928174.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:14.525Z,1528928174.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:14.933Z,1528928174.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:15.340Z,1528928175.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:15.738Z,1528928175.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:16.132Z,1528928176.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:16.521Z,1528928176.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:16.930Z,1528928176.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:17.325Z,1528928177.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:17.739Z,1528928177.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:18.134Z,1528928178.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:19.328Z,1528928179.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:19.483Z,1528928179.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:19.882Z,1528928179.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:20.282Z,1528928180.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:20.681Z,1528928180.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:21.077Z,1528928181.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:21.480Z,1528928181.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:21.877Z,1528928181.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:22.277Z,1528928182.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:22.689Z,1528928182.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:23.088Z,1528928183.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:24.251Z,1528928184.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:24.396Z,1528928184.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:24.796Z,1528928184.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:25.194Z,1528928185.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:25.595Z,1528928185.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:25.986Z,1528928185.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:26.387Z,1528928186.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:26.806Z,1528928186.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:27.194Z,1528928187.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:28.348Z,1528928188.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:28.501Z,1528928188.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:28.898Z,1528928188.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:29.304Z,1528928189.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:29.700Z,1528928189.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:30.097Z,1528928190.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:30.516Z,1528928190.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:30.926Z,1528928190.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:32.564Z,1528928192.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:32.753Z,1528928192.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:33.161Z,1528928193.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:33.608Z,1528928193.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:34.001Z,1528928194.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:34.332Z,1528928194.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:34.727Z,1528928194.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:35.128Z,1528928195.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:35.556Z,1528928195.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:35.950Z,1528928195.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:37.099Z,1528928197.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:37.251Z,1528928197.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:37.659Z,1528928197.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:38.039Z,1528928198.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:38.443Z,1528928198.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:38.836Z,1528928198.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:39.231Z,1528928199.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:39.662Z,1528928199.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:40.034Z,1528928200.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:40.438Z,1528928200.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:41.625Z,1528928201.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:41.764Z,1528928201.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:42.175Z,1528928202.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:42.574Z,1528928202.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:42.975Z,1528928202.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:43.371Z,1528928203.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:43.774Z,1528928203.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:44.173Z,1528928204.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:44.586Z,1528928204.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:44.978Z,1528928204.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:46.127Z,1528928206.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:46.274Z,1528928206.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:46.676Z,1528928206.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:47.079Z,1528928207.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:47.474Z,1528928207.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:47.874Z,1528928207.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:48.250Z,1528928208.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:48.686Z,1528928208.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:49.082Z,1528928209.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:50.274Z,1528928210.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:50.422Z,1528928210.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:50.829Z,1528928210.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:51.227Z,1528928211.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:51.629Z,1528928211.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:52.032Z,1528928212.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:52.426Z,1528928212.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:52.848Z,1528928212.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:53.236Z,1528928213.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:54.382Z,1528928214.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:54.543Z,1528928214.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:54.933Z,1528928214.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:55.334Z,1528928215.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:55.752Z,1528928215.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:56.133Z,1528928216.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:56.505Z,1528928216.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:56.923Z,1528928216.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:57.342Z,1528928217.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:57.747Z,1528928217.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:58.144Z,1528928218.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:59.320Z,1528928219.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:59.483Z,1528928219.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:16:59.894Z,1528928219.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:00.304Z,1528928220.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:00.698Z,1528928220.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:01.094Z,1528928221.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:01.512Z,1528928221.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:01.892Z,1528928221.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:02.302Z,1528928222.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:03.457Z,1528928223.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:03.611Z,1528928223.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:04.015Z,1528928224.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:04.411Z,1528928224.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:04.824Z,1528928224.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:05.204Z,1528928225.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:05.606Z,1528928225.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:05.996Z,1528928225.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:06.401Z,1528928226.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:06.824Z,1528928226.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:07.219Z,1528928227.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:08.374Z,1528928228.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:08.519Z,1528928228.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:08.917Z,1528928228.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:09.330Z,1528928229.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:09.720Z,1528928229.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:10.116Z,1528928230.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:10.529Z,1528928230.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:10.896Z,1528928230.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:11.300Z,1528928231.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:11.732Z,1528928231.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:12.932Z,1528928232.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:13.077Z,1528928233.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:13.478Z,1528928233.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:13.888Z,1528928233.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:14.274Z,1528928234.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:14.675Z,1528928234.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:15.074Z,1528928235.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:15.473Z,1528928235.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:15.896Z,1528928235.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:16.288Z,1528928236.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:17.471Z,1528928237.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:17.622Z,1528928237.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:18.026Z,1528928238.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:18.427Z,1528928238.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:18.827Z,1528928238.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:19.200Z,1528928239.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:19.628Z,1528928239.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:20.004Z,1528928240.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:20.405Z,1528928240.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:20.830Z,1528928240.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:21.230Z,1528928241.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:22.396Z,1528928242.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:22.543Z,1528928242.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:22.941Z,1528928242.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:23.339Z,1528928243.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:23.744Z,1528928243.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:24.129Z,1528928244.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:24.548Z,1528928244.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:24.916Z,1528928244.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:25.354Z,1528928245.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:26.515Z,1528928246.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:26.668Z,1528928246.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:27.094Z,1528928247.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:27.494Z,1528928247.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:27.894Z,1528928247.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:28.269Z,1528928248.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:28.690Z,1528928248.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:29.070Z,1528928249.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:29.470Z,1528928249.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:29.904Z,1528928249.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:30.295Z,1528928250.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:31.505Z,1528928251.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:31.672Z,1528928251.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:32.068Z,1528928252.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:32.479Z,1528928252.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:32.906Z,1528928252.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:33.265Z,1528928253.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:33.662Z,1528928253.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:34.059Z,1528928254.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:34.463Z,1528928254.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:34.895Z,1528928254.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:35.273Z,1528928255.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:36.471Z,1528928256.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:36.603Z,1528928256.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:37.014Z,1528928257.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:37.422Z,1528928257.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:37.818Z,1528928257.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:38.216Z,1528928258.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:38.611Z,1528928258.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:39.017Z,1528928259.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:39.416Z,1528928259.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:39.826Z,1528928259.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:40.215Z,1528928260.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:41.461Z,1528928261.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:41.650Z,1528928261.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:42.043Z,1528928262.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:42.423Z,1528928262.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:42.819Z,1528928262.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:43.217Z,1528928263.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:43.615Z,1528928263.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:43.998Z,1528928263.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:44.418Z,1528928264.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:44.836Z,1528928264.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:45.227Z,1528928265.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:46.556Z,1528928266.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:46.728Z,1528928266.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:47.135Z,1528928267.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:47.535Z,1528928267.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:47.940Z,1528928267.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:48.316Z,1528928268.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:48.715Z,1528928268.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:49.133Z,1528928269.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:49.540Z,1528928269.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:49.947Z,1528928269.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:50.334Z,1528928270.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:51.523Z,1528928271.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:51.703Z,1528928271.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:52.094Z,1528928272.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:52.508Z,1528928272.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:52.898Z,1528928272.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:53.275Z,1528928273.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:53.676Z,1528928273.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:54.076Z,1528928274.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:54.476Z,1528928274.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:54.906Z,1528928274.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:55.303Z,1528928275.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:56.575Z,1528928276.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:56.702Z,1528928276.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:57.118Z,1528928277.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:57.524Z,1528928277.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:57.918Z,1528928277.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:58.312Z,1528928278.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:58.715Z,1528928278.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:59.112Z,1528928279.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:59.521Z,1528928279.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:17:59.929Z,1528928279.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:00.315Z,1528928280.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:01.633Z,1528928281.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:01.771Z,1528928281.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:02.178Z,1528928282.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:02.579Z,1528928282.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:02.979Z,1528928282.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:03.373Z,1528928283.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:03.772Z,1528928283.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:04.156Z,1528928284.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:04.574Z,1528928284.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:04.990Z,1528928284.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:05.385Z,1528928285.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:06.639Z,1528928286.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:06.774Z,1528928286.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:07.193Z,1528928287.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:07.595Z,1528928287.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:07.994Z,1528928287.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:08.390Z,1528928288.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:08.790Z,1528928288.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:09.189Z,1528928289.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:09.601Z,1528928289.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:10.004Z,1528928290.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:11.194Z,1528928291.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:11.344Z,1528928291.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:11.749Z,1528928291.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:12.146Z,1528928292.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:12.549Z,1528928292.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:12.942Z,1528928292.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:13.337Z,1528928293.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:13.756Z,1528928293.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:14.150Z,1528928294.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:15.297Z,1528928295.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:15.452Z,1528928295.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:15.856Z,1528928295.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:16.263Z,1528928296.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:16.821Z,1528928296.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:17.105Z,1528928297.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:17.496Z,1528928297.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:18.034Z,1528928298.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:18.351Z,1528928298.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:19.449Z,1528928299.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:19.596Z,1528928299.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:20.004Z,1528928300.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:20.401Z,1528928300.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:20.798Z,1528928300.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:21.198Z,1528928301.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:21.634Z,1528928301.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:22.011Z,1528928302.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:22.399Z,1528928302.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:23.567Z,1528928303.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:23.740Z,1528928303.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:24.142Z,1528928304.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:24.542Z,1528928304.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:24.940Z,1528928304.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:25.345Z,1528928305.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:25.720Z,1528928305.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:26.120Z,1528928306.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:26.542Z,1528928306.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:26.957Z,1528928306.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:27.352Z,1528928307.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:28.570Z,1528928308.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:28.715Z,1528928308.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:29.123Z,1528928309.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:29.532Z,1528928309.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:29.928Z,1528928309.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:30.318Z,1528928310.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:30.718Z,1528928310.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:31.111Z,1528928311.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:31.519Z,1528928311.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:31.954Z,1528928311.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:32.327Z,1528928312.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:33.556Z,1528928313.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:33.712Z,1528928313.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:34.111Z,1528928314.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:34.511Z,1528928314.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:34.911Z,1528928314.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:35.316Z,1528928315.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:35.716Z,1528928315.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:36.088Z,1528928316.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:36.496Z,1528928316.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:36.924Z,1528928316.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:37.319Z,1528928317.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:38.524Z,1528928318.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:38.679Z,1528928318.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:39.070Z,1528928319.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:39.475Z,1528928319.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:39.870Z,1528928319.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:40.272Z,1528928320.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:40.683Z,1528928320.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:41.052Z,1528928321.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:41.481Z,1528928321.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:42.636Z,1528928322.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:42.811Z,1528928322.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:43.201Z,1528928323.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:43.606Z,1528928323.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:44.005Z,1528928324.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:44.379Z,1528928324.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:44.779Z,1528928324.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:45.180Z,1528928325.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:45.581Z,1528928325.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:46.008Z,1528928326.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:46.406Z,1528928326.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:47.571Z,1528928327.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:47.572Z,1528928327.572 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 376
2018-06-13T22:18:47.572Z,1528928327.572 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T22:18:47.574Z,1528928327.574 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:47.574Z,1528928327.574 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 376
2018-06-13T22:18:47.574Z,1528928327.574 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T22:18:47.575Z,1528928327.575 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:47.575Z,1528928327.575 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 376
2018-06-13T22:18:47.576Z,1528928327.576 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T22:18:47.653Z,1528928327.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T22:18:47.653Z,1528928327.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T22:18:47.654Z,1528928327.654 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T22:18:47.813Z,1528928327.813 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T22:18:47.813Z,1528928327.813 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 376
2018-06-13T22:18:47.814Z,1528928327.814 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T22:18:47.814Z,1528928327.814 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 376
2018-06-13T22:18:47.814Z,1528928327.814 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T22:18:47.814Z,1528928327.814 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 376
2018-06-13T22:18:48.122Z,1528928328.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T22:18:48.122Z,1528928328.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:18:48.122Z,1528928328.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:18:48.123Z,1528928328.123 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T22:18:48.123Z,1528928328.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:18:48.124Z,1528928328.124 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:18:48.124Z,1528928328.124 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T22:18:48.124Z,1528928328.124 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:18:48.125Z,1528928328.125 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:18:48.537Z,1528928328.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.0 s old, using for 20.0 s.
2018-06-13T22:18:48.538Z,1528928328.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:48.913Z,1528928328.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2018-06-13T22:18:48.914Z,1528928328.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:49.306Z,1528928329.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.7 s old, using for 20.0 s.
2018-06-13T22:18:49.307Z,1528928329.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:49.706Z,1528928329.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.1 s old, using for 20.0 s.
2018-06-13T22:18:49.707Z,1528928329.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:50.106Z,1528928330.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.5 s old, using for 20.0 s.
2018-06-13T22:18:50.107Z,1528928330.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:50.507Z,1528928330.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2018-06-13T22:18:50.508Z,1528928330.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:50.938Z,1528928330.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.4 s old, using for 20.0 s.
2018-06-13T22:18:50.939Z,1528928330.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:51.310Z,1528928331.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2018-06-13T22:18:51.311Z,1528928331.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:52.494Z,1528928332.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2018-06-13T22:18:52.494Z,1528928332.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:52.651Z,1528928332.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-06-13T22:18:52.652Z,1528928332.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:53.053Z,1528928333.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T22:18:53.054Z,1528928333.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:53.449Z,1528928333.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2018-06-13T22:18:53.450Z,1528928333.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:53.852Z,1528928333.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2018-06-13T22:18:53.853Z,1528928333.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:54.259Z,1528928334.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2018-06-13T22:18:54.260Z,1528928334.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:54.646Z,1528928334.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2018-06-13T22:18:54.647Z,1528928334.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:55.057Z,1528928335.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T22:18:55.058Z,1528928335.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:55.454Z,1528928335.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.9 s old, using for 20.0 s.
2018-06-13T22:18:55.454Z,1528928335.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:56.607Z,1528928336.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.0 s old, using for 20.0 s.
2018-06-13T22:18:56.608Z,1528928336.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:56.741Z,1528928336.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2018-06-13T22:18:56.742Z,1528928336.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:57.160Z,1528928337.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2018-06-13T22:18:57.161Z,1528928337.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:57.570Z,1528928337.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2018-06-13T22:18:57.571Z,1528928337.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:57.965Z,1528928337.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2018-06-13T22:18:57.966Z,1528928337.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:58.378Z,1528928338.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2018-06-13T22:18:58.379Z,1528928338.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:58.734Z,1528928338.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2018-06-13T22:18:58.735Z,1528928338.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:59.157Z,1528928339.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2018-06-13T22:18:59.158Z,1528928339.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:59.539Z,1528928339.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T22:18:59.540Z,1528928339.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:18:59.969Z,1528928339.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2018-06-13T22:18:59.970Z,1528928339.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:00.354Z,1528928340.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2018-06-13T22:19:00.355Z,1528928340.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:01.542Z,1528928341.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2018-06-13T22:19:01.543Z,1528928341.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:01.700Z,1528928341.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2018-06-13T22:19:01.701Z,1528928341.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:02.100Z,1528928342.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.5 s old, using for 20.0 s.
2018-06-13T22:19:02.101Z,1528928342.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:02.497Z,1528928342.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.9 s old, using for 20.0 s.
2018-06-13T22:19:02.498Z,1528928342.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:02.902Z,1528928342.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2018-06-13T22:19:02.902Z,1528928342.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:03.284Z,1528928343.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2018-06-13T22:19:03.287Z,1528928343.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:03.712Z,1528928343.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.1 s old, using for 20.0 s.
2018-06-13T22:19:03.713Z,1528928343.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:04.099Z,1528928344.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2018-06-13T22:19:04.099Z,1528928344.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:04.502Z,1528928344.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.9 s old, using for 20.0 s.
2018-06-13T22:19:04.502Z,1528928344.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:05.700Z,1528928345.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.1 s old, using for 20.0 s.
2018-06-13T22:19:05.701Z,1528928345.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:05.855Z,1528928345.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T22:19:05.856Z,1528928345.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:06.268Z,1528928346.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T22:19:06.269Z,1528928346.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:06.664Z,1528928346.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T22:19:06.665Z,1528928346.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:07.062Z,1528928347.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T22:19:07.063Z,1528928347.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:07.452Z,1528928347.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2018-06-13T22:19:07.453Z,1528928347.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:07.860Z,1528928347.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:08.257Z,1528928348.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:08.654Z,1528928348.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:09.072Z,1528928349.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:09.462Z,1528928349.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:10.679Z,1528928350.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:10.832Z,1528928350.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:11.255Z,1528928351.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:11.663Z,1528928351.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:12.058Z,1528928352.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:12.436Z,1528928352.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:12.836Z,1528928352.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:13.236Z,1528928353.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:13.640Z,1528928353.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:14.067Z,1528928354.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:14.462Z,1528928354.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:15.668Z,1528928355.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:15.827Z,1528928355.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:16.229Z,1528928356.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:16.641Z,1528928356.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:17.023Z,1528928357.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:17.423Z,1528928357.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:17.820Z,1528928357.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:18.226Z,1528928358.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:18.627Z,1528928358.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:19.034Z,1528928359.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:19.427Z,1528928359.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:20.639Z,1528928360.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:20.780Z,1528928360.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:21.138Z,1528928361.138 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-06-13T22:19:21.139Z,1528928361.139 [NAL9602] Data Fault, FailCount= 3
2018-06-13T22:19:21.139Z,1528928361.139 [NAL9602](ERROR): Data Fault
2018-06-13T22:19:21.190Z,1528928361.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:21.265Z,1528928361.265 [CBIT](ERROR): Data Fault in component: NAL9602
2018-06-13T22:19:21.534Z,1528928361.534 [NAL9602](INFO): Powering down
2018-06-13T22:19:21.597Z,1528928361.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:21.976Z,1528928361.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:22.384Z,1528928362.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:22.465Z,1528928362.465 [CBIT](INFO): Clearing failed state for component NAL9602
2018-06-13T22:19:22.465Z,1528928362.465 [NAL9602] No Fault, FailCount= 3
2018-06-13T22:19:22.778Z,1528928362.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:23.181Z,1528928363.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:23.578Z,1528928363.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:23.981Z,1528928363.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:24.379Z,1528928364.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:24.785Z,1528928364.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:25.180Z,1528928365.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:25.575Z,1528928365.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:25.979Z,1528928365.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:26.394Z,1528928366.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:26.776Z,1528928366.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:27.181Z,1528928367.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:27.581Z,1528928367.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:27.981Z,1528928367.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:28.386Z,1528928368.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:28.788Z,1528928368.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:29.174Z,1528928369.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:29.585Z,1528928369.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:29.981Z,1528928369.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:30.379Z,1528928370.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:30.781Z,1528928370.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:31.186Z,1528928371.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:31.622Z,1528928371.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:31.989Z,1528928371.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:32.460Z,1528928372.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:32.810Z,1528928372.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:33.283Z,1528928373.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:33.604Z,1528928373.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:33.967Z,1528928373.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:34.403Z,1528928374.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:34.797Z,1528928374.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:35.169Z,1528928375.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:35.580Z,1528928375.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:35.988Z,1528928375.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:36.381Z,1528928376.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:36.794Z,1528928376.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:37.182Z,1528928377.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:37.591Z,1528928377.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:37.985Z,1528928377.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:38.389Z,1528928378.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:38.783Z,1528928378.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:39.200Z,1528928379.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:39.587Z,1528928379.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:39.990Z,1528928379.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:40.384Z,1528928380.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:40.792Z,1528928380.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:41.174Z,1528928381.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:41.591Z,1528928381.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:41.994Z,1528928381.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:42.396Z,1528928382.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:42.788Z,1528928382.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:43.197Z,1528928383.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:43.569Z,1528928383.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:43.984Z,1528928383.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:44.370Z,1528928384.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:44.776Z,1528928384.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:45.176Z,1528928385.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:45.571Z,1528928385.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:45.971Z,1528928385.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:46.380Z,1528928386.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:46.775Z,1528928386.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:47.169Z,1528928387.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:47.575Z,1528928387.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:47.981Z,1528928387.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:48.378Z,1528928388.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:48.774Z,1528928388.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:49.172Z,1528928389.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:49.570Z,1528928389.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:49.980Z,1528928389.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:50.373Z,1528928390.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:50.775Z,1528928390.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:51.175Z,1528928391.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:51.592Z,1528928391.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:51.930Z,1528928391.930 [NAL9602](INFO): Powering up NAL9602
2018-06-13T22:19:51.974Z,1528928391.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:52.380Z,1528928392.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:52.776Z,1528928392.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:53.171Z,1528928393.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:53.576Z,1528928393.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:53.973Z,1528928393.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:54.374Z,1528928394.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:54.781Z,1528928394.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:55.176Z,1528928395.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:55.575Z,1528928395.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:55.978Z,1528928395.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:56.379Z,1528928396.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:56.773Z,1528928396.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:57.172Z,1528928397.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:57.580Z,1528928397.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:57.974Z,1528928397.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:58.374Z,1528928398.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:58.773Z,1528928398.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:59.170Z,1528928399.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:59.576Z,1528928399.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:19:59.978Z,1528928399.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:00.378Z,1528928400.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:00.778Z,1528928400.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:01.180Z,1528928401.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:01.570Z,1528928401.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:01.984Z,1528928401.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:02.385Z,1528928402.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:02.734Z,1528928402.734 [NAL9602](INFO): NAL9602 initialized
2018-06-13T22:20:02.778Z,1528928402.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:03.178Z,1528928403.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:03.596Z,1528928403.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:03.992Z,1528928403.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:04.397Z,1528928404.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:04.780Z,1528928404.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:05.176Z,1528928405.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:05.600Z,1528928405.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:05.000Z,1528928406.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:07.186Z,1528928407.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:07.328Z,1528928407.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:07.729Z,1528928407.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:08.129Z,1528928408.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:08.536Z,1528928408.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:08.928Z,1528928408.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:09.308Z,1528928409.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:09.712Z,1528928409.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:10.113Z,1528928410.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:10.540Z,1528928410.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:10.939Z,1528928410.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:12.810Z,1528928412.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:12.960Z,1528928412.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:13.379Z,1528928413.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:13.791Z,1528928413.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:14.171Z,1528928414.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:14.574Z,1528928414.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:14.976Z,1528928414.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:15.389Z,1528928415.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:15.782Z,1528928415.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:16.952Z,1528928416.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:17.127Z,1528928417.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:17.519Z,1528928417.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:17.931Z,1528928417.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:18.328Z,1528928418.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:18.708Z,1528928418.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:19.108Z,1528928419.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:19.554Z,1528928419.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:19.903Z,1528928419.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:20.403Z,1528928420.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:21.479Z,1528928421.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:21.636Z,1528928421.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:22.042Z,1528928422.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:22.415Z,1528928422.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:22.816Z,1528928422.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:23.210Z,1528928423.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:23.608Z,1528928423.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:24.007Z,1528928424.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:24.450Z,1528928424.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:24.818Z,1528928424.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:26.052Z,1528928426.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:26.190Z,1528928426.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:26.614Z,1528928426.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:27.016Z,1528928427.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:27.411Z,1528928427.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:27.806Z,1528928427.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:28.210Z,1528928428.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:28.622Z,1528928428.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:29.014Z,1528928429.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:30.173Z,1528928430.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:30.332Z,1528928430.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:30.721Z,1528928430.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:31.120Z,1528928431.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:31.521Z,1528928431.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:31.916Z,1528928431.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:32.316Z,1528928432.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:32.709Z,1528928432.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:33.112Z,1528928433.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:33.527Z,1528928433.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:33.926Z,1528928433.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:35.116Z,1528928435.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:35.270Z,1528928435.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:35.671Z,1528928435.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:36.072Z,1528928436.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:36.474Z,1528928436.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:36.877Z,1528928436.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:37.285Z,1528928437.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:37.675Z,1528928437.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:38.076Z,1528928438.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:39.227Z,1528928439.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:39.377Z,1528928439.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:39.812Z,1528928439.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:40.192Z,1528928440.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:40.592Z,1528928440.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:40.988Z,1528928440.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:41.381Z,1528928441.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:41.779Z,1528928441.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:42.182Z,1528928442.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:42.616Z,1528928442.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:42.989Z,1528928442.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:44.224Z,1528928444.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:44.378Z,1528928444.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:44.778Z,1528928444.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:45.181Z,1528928445.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:45.576Z,1528928445.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:45.970Z,1528928445.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:46.370Z,1528928446.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:46.773Z,1528928446.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:47.167Z,1528928447.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:47.592Z,1528928447.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:47.977Z,1528928447.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:49.294Z,1528928449.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:49.475Z,1528928449.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:49.864Z,1528928449.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:50.273Z,1528928450.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:50.675Z,1528928450.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:51.048Z,1528928451.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:51.448Z,1528928451.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:51.848Z,1528928451.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:52.249Z,1528928452.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:52.676Z,1528928452.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:53.075Z,1528928453.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:54.274Z,1528928454.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:54.435Z,1528928454.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:54.828Z,1528928454.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:55.236Z,1528928455.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:55.631Z,1528928455.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:56.013Z,1528928456.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:56.425Z,1528928456.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:56.808Z,1528928456.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:57.210Z,1528928457.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:57.639Z,1528928457.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:58.032Z,1528928458.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:59.280Z,1528928459.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:59.434Z,1528928459.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:20:59.844Z,1528928459.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:00.252Z,1528928460.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:00.646Z,1528928460.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:01.036Z,1528928461.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:01.445Z,1528928461.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:01.837Z,1528928461.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:02.242Z,1528928462.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:02.661Z,1528928462.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:03.049Z,1528928463.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:04.270Z,1528928464.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:04.452Z,1528928464.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:04.860Z,1528928464.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:05.255Z,1528928465.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:05.651Z,1528928465.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:06.047Z,1528928466.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:06.431Z,1528928466.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:06.834Z,1528928466.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:07.247Z,1528928467.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:07.672Z,1528928467.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:08.044Z,1528928468.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:09.279Z,1528928469.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:09.407Z,1528928469.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:09.833Z,1528928469.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:10.236Z,1528928470.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:10.615Z,1528928470.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:11.009Z,1528928471.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:11.438Z,1528928471.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:11.808Z,1528928471.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:12.212Z,1528928472.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:12.624Z,1528928472.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:13.018Z,1528928473.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:14.244Z,1528928474.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:14.403Z,1528928474.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:14.808Z,1528928474.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:15.205Z,1528928475.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:15.603Z,1528928475.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:15.976Z,1528928475.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:16.380Z,1528928476.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:16.781Z,1528928476.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:17.184Z,1528928477.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:17.608Z,1528928477.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:18.005Z,1528928478.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:19.219Z,1528928479.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:19.346Z,1528928479.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:19.763Z,1528928479.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:20.167Z,1528928480.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:20.567Z,1528928480.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:20.962Z,1528928480.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:21.378Z,1528928481.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:21.803Z,1528928481.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:22.211Z,1528928482.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:23.458Z,1528928483.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:23.615Z,1528928483.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:24.013Z,1528928484.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:24.415Z,1528928484.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:24.818Z,1528928484.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:25.211Z,1528928485.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:25.613Z,1528928485.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:26.010Z,1528928486.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:26.432Z,1528928486.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:26.824Z,1528928486.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:27.979Z,1528928487.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:28.159Z,1528928488.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:28.558Z,1528928488.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:28.940Z,1528928488.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:29.339Z,1528928489.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:29.744Z,1528928489.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:30.128Z,1528928490.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:30.567Z,1528928490.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:30.952Z,1528928490.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:31.370Z,1528928491.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:32.519Z,1528928492.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:32.662Z,1528928492.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:33.081Z,1528928493.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:33.492Z,1528928493.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:33.887Z,1528928493.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:34.280Z,1528928494.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:34.677Z,1528928494.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:35.077Z,1528928495.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:35.491Z,1528928495.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:35.900Z,1528928495.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:37.045Z,1528928497.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:37.192Z,1528928497.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:37.600Z,1528928497.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:37.993Z,1528928497.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:38.396Z,1528928498.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:38.784Z,1528928498.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:39.191Z,1528928499.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:39.597Z,1528928499.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:40.005Z,1528928500.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:42.051Z,1528928502.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:42.210Z,1528928502.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:42.616Z,1528928502.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:43.028Z,1528928503.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:43.424Z,1528928503.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:43.822Z,1528928503.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:44.224Z,1528928504.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:44.631Z,1528928504.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:45.024Z,1528928505.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:47.123Z,1528928507.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:47.320Z,1528928507.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:47.714Z,1528928507.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:48.125Z,1528928508.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:48.127Z,1528928508.127 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:48.127Z,1528928508.127 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 377
2018-06-13T22:21:48.127Z,1528928508.127 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-06-13T22:21:48.137Z,1528928508.137 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:48.137Z,1528928508.137 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 377
2018-06-13T22:21:48.137Z,1528928508.137 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-06-13T22:21:48.229Z,1528928508.229 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-06-13T22:21:48.229Z,1528928508.229 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-06-13T22:21:48.510Z,1528928508.510 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:48.511Z,1528928508.511 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 377
2018-06-13T22:21:48.511Z,1528928508.511 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2018-06-13T22:21:48.629Z,1528928508.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2018-06-13T22:21:48.629Z,1528928508.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-06-13T22:21:48.629Z,1528928508.629 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 377
2018-06-13T22:21:48.630Z,1528928508.630 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-06-13T22:21:48.630Z,1528928508.630 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 377
2018-06-13T22:21:48.898Z,1528928508.898 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-06-13T22:21:48.898Z,1528928508.898 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:21:48.899Z,1528928508.899 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:21:48.899Z,1528928508.899 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-06-13T22:21:48.899Z,1528928508.899 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:21:48.900Z,1528928508.900 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:21:48.993Z,1528928508.993 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2018-06-13T22:21:48.993Z,1528928508.993 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 377
2018-06-13T22:21:49.302Z,1528928509.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2018-06-13T22:21:49.302Z,1528928509.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2018-06-13T22:21:49.303Z,1528928509.303 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2018-06-13T22:21:49.724Z,1528928509.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2018-06-13T22:21:49.729Z,1528928509.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:50.116Z,1528928510.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2018-06-13T22:21:50.121Z,1528928510.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:51.484Z,1528928511.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.0 s old, using for 20.0 s.
2018-06-13T22:21:51.485Z,1528928511.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:51.667Z,1528928511.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2018-06-13T22:21:51.668Z,1528928511.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:52.059Z,1528928512.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2018-06-13T22:21:52.060Z,1528928512.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:52.470Z,1528928512.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2018-06-13T22:21:52.471Z,1528928512.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:52.868Z,1528928512.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2018-06-13T22:21:52.869Z,1528928512.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:53.264Z,1528928513.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2018-06-13T22:21:53.269Z,1528928513.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:53.637Z,1528928513.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2018-06-13T22:21:53.638Z,1528928513.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:54.044Z,1528928514.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2018-06-13T22:21:54.058Z,1528928514.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:54.472Z,1528928514.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2018-06-13T22:21:54.473Z,1528928514.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:54.869Z,1528928514.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2018-06-13T22:21:54.870Z,1528928514.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:56.028Z,1528928516.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2018-06-13T22:21:56.029Z,1528928516.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:56.184Z,1528928516.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2018-06-13T22:21:56.186Z,1528928516.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:56.578Z,1528928516.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2018-06-13T22:21:56.579Z,1528928516.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:56.980Z,1528928516.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2018-06-13T22:21:56.981Z,1528928516.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:57.371Z,1528928517.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2018-06-13T22:21:57.372Z,1528928517.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:57.768Z,1528928517.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2018-06-13T22:21:57.773Z,1528928517.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:58.167Z,1528928518.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2018-06-13T22:21:58.174Z,1528928518.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:58.586Z,1528928518.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2018-06-13T22:21:58.586Z,1528928518.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:58.975Z,1528928518.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2018-06-13T22:21:58.976Z,1528928518.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:21:59.372Z,1528928519.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2018-06-13T22:21:59.373Z,1528928519.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:00.532Z,1528928520.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2018-06-13T22:22:00.533Z,1528928520.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:00.666Z,1528928520.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2018-06-13T22:22:00.667Z,1528928520.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:01.092Z,1528928521.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2018-06-13T22:22:01.097Z,1528928521.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:01.471Z,1528928521.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2018-06-13T22:22:01.472Z,1528928521.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:01.876Z,1528928521.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2018-06-13T22:22:01.893Z,1528928521.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:02.265Z,1528928522.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2018-06-13T22:22:02.266Z,1528928522.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:02.664Z,1528928522.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2018-06-13T22:22:02.665Z,1528928522.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:03.071Z,1528928523.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2018-06-13T22:22:03.072Z,1528928523.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:03.497Z,1528928523.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2018-06-13T22:22:03.498Z,1528928523.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:03.872Z,1528928523.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2018-06-13T22:22:03.872Z,1528928523.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:05.065Z,1528928525.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2018-06-13T22:22:05.066Z,1528928525.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:05.210Z,1528928525.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.7 s old, using for 20.0 s.
2018-06-13T22:22:05.211Z,1528928525.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:05.605Z,1528928525.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.1 s old, using for 20.0 s.
2018-06-13T22:22:05.606Z,1528928525.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:06.013Z,1528928526.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2018-06-13T22:22:06.014Z,1528928526.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:06.409Z,1528928526.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2018-06-13T22:22:06.410Z,1528928526.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:06.800Z,1528928526.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.3 s old, using for 20.0 s.
2018-06-13T22:22:06.801Z,1528928526.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:07.210Z,1528928527.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2018-06-13T22:22:07.211Z,1528928527.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:07.620Z,1528928527.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2018-06-13T22:22:07.621Z,1528928527.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:08.008Z,1528928528.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2018-06-13T22:22:08.009Z,1528928528.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:09.166Z,1528928529.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:09.311Z,1528928529.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:09.709Z,1528928529.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:10.109Z,1528928530.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:10.506Z,1528928530.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:10.902Z,1528928530.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:11.302Z,1528928531.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:11.720Z,1528928531.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:12.109Z,1528928532.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:13.659Z,1528928533.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:13.836Z,1528928533.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:14.236Z,1528928534.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:14.650Z,1528928534.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:15.052Z,1528928535.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:15.444Z,1528928535.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:15.851Z,1528928535.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:16.241Z,1528928536.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:16.646Z,1528928536.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:17.044Z,1528928537.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:18.208Z,1528928538.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:18.368Z,1528928538.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:18.791Z,1528928538.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:19.170Z,1528928539.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:19.582Z,1528928539.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:19.956Z,1528928539.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:20.353Z,1528928540.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:20.785Z,1528928540.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:21.184Z,1528928541.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:22.337Z,1528928542.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:22.487Z,1528928542.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:22.888Z,1528928542.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:23.285Z,1528928543.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:23.698Z,1528928543.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:24.091Z,1528928544.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:24.461Z,1528928544.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:24.888Z,1528928544.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:25.277Z,1528928545.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:25.700Z,1528928545.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:26.092Z,1528928546.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:27.255Z,1528928547.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:27.399Z,1528928547.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:27.805Z,1528928547.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:28.203Z,1528928548.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:28.598Z,1528928548.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:28.994Z,1528928548.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:29.390Z,1528928549.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:29.810Z,1528928549.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:30.216Z,1528928550.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:31.361Z,1528928551.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:31.508Z,1528928551.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:31.916Z,1528928551.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:32.316Z,1528928552.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:32.712Z,1528928552.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:33.100Z,1528928553.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:33.507Z,1528928553.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:33.900Z,1528928553.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:34.300Z,1528928554.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:34.715Z,1528928554.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:35.110Z,1528928555.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:36.400Z,1528928556.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:36.555Z,1528928556.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:36.953Z,1528928556.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:37.364Z,1528928557.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:37.753Z,1528928557.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:38.144Z,1528928558.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:38.547Z,1528928558.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:38.944Z,1528928558.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:39.350Z,1528928559.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:39.768Z,1528928559.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:40.154Z,1528928560.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:41.361Z,1528928561.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:41.493Z,1528928561.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:41.911Z,1528928561.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:42.315Z,1528928562.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:42.710Z,1528928562.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:43.104Z,1528928563.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:43.507Z,1528928563.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:43.903Z,1528928563.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:44.308Z,1528928564.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:44.721Z,1528928564.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:45.113Z,1528928565.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:46.349Z,1528928566.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:46.511Z,1528928566.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:46.908Z,1528928566.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:47.306Z,1528928567.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:47.706Z,1528928567.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:48.102Z,1528928568.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:48.513Z,1528928568.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:48.900Z,1528928568.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:49.309Z,1528928569.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:50.465Z,1528928570.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:50.619Z,1528928570.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:51.010Z,1528928571.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:51.411Z,1528928571.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:51.810Z,1528928571.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:52.209Z,1528928572.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:52.604Z,1528928572.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:52.988Z,1528928572.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:53.413Z,1528928573.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:53.828Z,1528928573.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:54.218Z,1528928574.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:55.391Z,1528928575.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:55.554Z,1528928575.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:55.976Z,1528928575.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:56.376Z,1528928576.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:56.774Z,1528928576.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:57.173Z,1528928577.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:57.552Z,1528928577.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:57.948Z,1528928577.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:58.373Z,1528928578.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:58.788Z,1528928578.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:22:59.178Z,1528928579.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:00.354Z,1528928580.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:00.508Z,1528928580.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:00.901Z,1528928580.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:01.303Z,1528928581.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:01.711Z,1528928581.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:02.093Z,1528928582.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:02.508Z,1528928582.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:02.902Z,1528928582.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:03.304Z,1528928583.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:04.484Z,1528928584.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:04.643Z,1528928584.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:05.042Z,1528928585.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:05.441Z,1528928585.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:05.847Z,1528928585.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:06.238Z,1528928586.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:06.644Z,1528928586.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:07.037Z,1528928587.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:07.446Z,1528928587.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:07.850Z,1528928587.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:08.252Z,1528928588.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:09.515Z,1528928589.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:09.695Z,1528928589.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:10.096Z,1528928590.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:10.489Z,1528928590.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:10.895Z,1528928590.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:11.285Z,1528928591.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:11.672Z,1528928591.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:12.076Z,1528928592.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:12.512Z,1528928592.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:12.907Z,1528928592.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:14.103Z,1528928594.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:14.260Z,1528928594.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:14.670Z,1528928594.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:15.066Z,1528928595.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:15.462Z,1528928595.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:15.860Z,1528928595.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:16.259Z,1528928596.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:16.676Z,1528928596.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:17.074Z,1528928597.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:17.693Z,1528928597.693 [CommandLine](IMPORTANT): got command help
2018-06-13T22:23:18.260Z,1528928598.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:18.412Z,1528928598.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:18.812Z,1528928598.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:19.228Z,1528928599.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:19.619Z,1528928599.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:19.991Z,1528928599.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:20.392Z,1528928600.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:20.832Z,1528928600.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:21.203Z,1528928601.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:22.380Z,1528928602.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:22.528Z,1528928602.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:22.928Z,1528928602.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:23.331Z,1528928603.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:23.736Z,1528928603.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:24.132Z,1528928604.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:24.541Z,1528928604.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:24.912Z,1528928604.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:25.336Z,1528928605.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:25.719Z,1528928605.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:26.952Z,1528928606.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:27.090Z,1528928607.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:27.500Z,1528928607.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:27.902Z,1528928607.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:28.298Z,1528928608.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:28.693Z,1528928608.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:29.094Z,1528928609.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:29.482Z,1528928609.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:29.909Z,1528928609.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:30.307Z,1528928610.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:31.467Z,1528928611.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:31.619Z,1528928611.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:32.048Z,1528928612.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:32.445Z,1528928612.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:32.823Z,1528928612.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:33.218Z,1528928613.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:33.616Z,1528928613.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:33.754Z,1528928613.754 [CommandLine](IMPORTANT): got command stop
2018-06-13T22:23:33.755Z,1528928613.755 [CommandLine](IMPORTANT): Scheduling is paused
2018-06-13T22:23:34.025Z,1528928614.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:34.420Z,1528928614.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:34.843Z,1528928614.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:35.232Z,1528928615.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:36.427Z,1528928616.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:36.612Z,1528928616.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:37.005Z,1528928617.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:37.401Z,1528928617.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:37.807Z,1528928617.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:38.196Z,1528928618.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:38.585Z,1528928618.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:38.983Z,1528928618.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:39.388Z,1528928619.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:39.821Z,1528928619.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:40.207Z,1528928620.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:41.414Z,1528928621.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:41.564Z,1528928621.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:42.031Z,1528928622.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:42.371Z,1528928622.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:42.789Z,1528928622.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:43.307Z,1528928623.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:43.580Z,1528928623.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:43.959Z,1528928623.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:44.384Z,1528928624.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:45.524Z,1528928625.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:45.695Z,1528928625.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:46.113Z,1528928626.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:46.516Z,1528928626.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:46.908Z,1528928626.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:47.284Z,1528928627.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:47.683Z,1528928627.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:48.084Z,1528928628.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:48.488Z,1528928628.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:48.915Z,1528928628.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:49.311Z,1528928629.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:50.483Z,1528928630.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:50.631Z,1528928630.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:51.028Z,1528928631.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:51.428Z,1528928631.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:51.824Z,1528928631.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:52.228Z,1528928632.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:52.239Z,1528928632.239 [CommandLine](IMPORTANT): got command quit
2018-06-13T22:23:52.615Z,1528928632.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:53.022Z,1528928633.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:53.256Z,1528928633.256 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2018-06-13T22:23:53.256Z,1528928633.256 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:53.333Z,1528928633.333 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2018-06-13T22:23:53.333Z,1528928633.333 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:53.334Z,1528928633.334 [CommandLine](INFO): Join timeout helper Thread ID is 1119
2018-06-13T22:23:53.334Z,1528928633.334 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2018-06-13T22:23:53.334Z,1528928633.334 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:53.335Z,1528928633.335 [NavChartDb](INFO): Join timeout helper Thread ID is 1120
2018-06-13T22:23:53.398Z,1528928633.398 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2018-06-13T22:23:53.398Z,1528928633.398 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:53.401Z,1528928633.401 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2018-06-13T22:23:53.401Z,1528928633.401 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:53.402Z,1528928633.402 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 1121
2018-06-13T22:23:53.433Z,1528928633.433 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2018-06-13T22:23:53.433Z,1528928633.433 [WetLabsBB2FL](INFO): Powering down
2018-06-13T22:23:53.434Z,1528928633.434 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:53.437Z,1528928633.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:53.449Z,1528928633.449 [ComponentRegistry](INFO): Shutting down CTD_Seabird ThreadHandler
2018-06-13T22:23:53.449Z,1528928633.449 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:53.449Z,1528928633.449 [CTD_Seabird](INFO): Join timeout helper Thread ID is 1122
2018-06-13T22:23:53.785Z,1528928633.785 [CTD_Seabird ThreadHandler](INFO): Uninitializing protected caller thread.
2018-06-13T22:23:53.883Z,1528928633.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:53.997Z,1528928633.997 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-06-13T22:23:53.997Z,1528928633.997 [CTD_Seabird](INFO): Powering down
2018-06-13T22:23:53.999Z,1528928633.999 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:54.005Z,1528928634.005 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2018-06-13T22:23:54.005Z,1528928634.005 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:54.006Z,1528928634.006 [Radio_Surface](INFO): Join timeout helper Thread ID is 1124
2018-06-13T22:23:54.185Z,1528928634.185 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2018-06-13T22:23:54.186Z,1528928634.186 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:54.195Z,1528928634.195 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2018-06-13T22:23:54.195Z,1528928634.195 [logger ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:54.196Z,1528928634.196 [logger](INFO): Join timeout helper Thread ID is 1125
2018-06-13T22:23:54.217Z,1528928634.217 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2018-06-13T22:23:54.217Z,1528928634.217 [logger ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:54.227Z,1528928634.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-06-13T22:23:54.234Z,1528928634.234 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2018-06-13T22:23:54.234Z,1528928634.234 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:54.234Z,1528928634.234 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2018-06-13T22:23:54.234Z,1528928634.234 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:54.235Z,1528928634.235 [controlThread](INFO): Join timeout helper Thread ID is 1126
2018-06-13T22:23:54.307Z,1528928634.307 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2018-06-13T22:23:54.307Z,1528928634.307 [controlThread](DEBUG): Uninitializing ControlThread
2018-06-13T22:23:54.308Z,1528928634.308 [NAL9602](INFO): Powering down
2018-06-13T22:23:54.309Z,1528928634.309 [DAT](INFO): Powering down
2018-06-13T22:23:54.429Z,1528928634.429 [PNI_TCM](INFO): Powering down
2018-06-13T22:23:54.517Z,1528928634.517 [Aanderaa_O2](INFO): Powering down
2018-06-13T22:23:54.519Z,1528928634.519 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-06-13T22:23:54.520Z,1528928634.520 [ElevatorOffsetCalculator](DEBUG): Uninitializing ElevatorOffsetCalculator.
2018-06-13T22:23:54.521Z,1528928634.521 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2018-06-13T22:23:54.522Z,1528928634.522 [MissionManager](INFO): Uninitializing Mission Default
2018-06-13T22:23:54.522Z,1528928634.522 [Default] Stopped
2018-06-13T22:23:54.522Z,1528928634.522 [Default](DEBUG): Aggregate::uninitialize Default
2018-06-13T22:23:54.522Z,1528928634.522 [Default:B.GoToSurface] Stopped
2018-06-13T22:23:54.522Z,1528928634.522 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-06-13T22:23:54.522Z,1528928634.522 [Default:CheckIn] Stopped
2018-06-13T22:23:54.522Z,1528928634.522 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-06-13T22:23:54.523Z,1528928634.523 [Default:CheckIn:Read_Iridium] Stopped
2018-06-13T22:23:54.526Z,1528928634.526 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2018-06-13T22:23:54.527Z,1528928634.527 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2018-06-13T22:23:54.527Z,1528928634.527 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2018-06-13T22:23:54.527Z,1528928634.527 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2018-06-13T22:23:54.528Z,1528928634.528 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-06-13T22:23:54.528Z,1528928634.528 [BuoyancyServo](INFO): Powering down
2018-06-13T22:23:54.541Z,1528928634.541 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2018-06-13T22:23:54.541Z,1528928634.541 [ElevatorServo](INFO): Powering down
2018-06-13T22:23:54.542Z,1528928634.542 [MassServo](DEBUG): Uninitialize Mass Servo.
2018-06-13T22:23:54.542Z,1528928634.542 [MassServo](INFO): Powering down
2018-06-13T22:23:54.543Z,1528928634.543 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2018-06-13T22:23:54.543Z,1528928634.543 [RudderServo](INFO): Powering down
2018-06-13T22:23:54.543Z,1528928634.543 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2018-06-13T22:23:54.544Z,1528928634.544 [ThrusterServo](INFO): Powering down
2018-06-13T22:23:54.544Z,1528928634.544 [SBIT](DEBUG): Uninitialize SBIT Component.
2018-06-13T22:23:54.545Z,1528928634.545 [IBIT](DEBUG): Uninitialize IBIT Component.
2018-06-13T22:23:54.545Z,1528928634.545 [CBIT](DEBUG): Uninitialize CBIT Component.
2018-06-13T22:23:54.546Z,1528928634.546 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:54.641Z,1528928634.641 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:54.687Z,1528928634.687 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:54.691Z,1528928634.691 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:54.855Z,1528928634.855 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-06-13T22:23:54.907Z,1528928634.907 [logger ThreadHandler](INFO): Thread cancelled.